$3.00
Published Nationally ®
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
Western Edition
www.constructionequipmentguide.com
October 2, 2016 • Vol. IX • No. 20 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800/523-2200 • Fax 215/885-2910
Inside
$12M Project Expands NM 47, Improves Safety By Lori Lovely CEG CORRESPONDENT
ODOT Teaches Students About Construction Careers...12
In February, the New Mexico Department of Transportation and AUI Inc., the project contractor, began reconstruction of the NM 47 Peralta roadway corridor from milepost 31.0 to 32.8 through the town of Peralta. The 1.8-mi. (2.9 km) stretch of highway offered motorists two lanes in each direction, but the new configuration will be expanded to include two northbound and two southbound lanes, with a center turn lane and seven raised medians at intersections identified as high crash areas, according to Bernadette Bell, public relations officer of NMDOT District Three. The $12.1 million roadway reconstruction project also includes utility work, new pavement cross-section, curbs and see IMPROVEMENTS page 32
Work Continues on San Francisco Medical Center...15
Alex Lyon & Son Hosts Sale in D allas, Texas...78
Table of Contents ................4 California Section ........15-23
Crews take measures to minimize soil erosion and sediment transport, including mitigation measures to protect water quality.
The $12.1 million roadway reconstruction project also includes utility work, new pavement cross-section, curbs and gutter with sidewalks and a drainage system along the corridor.
Vegas Votes on NFL Ritchie, IronPlanet CEOs Stadium Funding Discuss Recent Acquisition
Paving Section ..............33-41 By Michelle Rindels ASSOCIATED PRESS
Off-Road Trucks Section ........ VEGAS (AP) A plan to build an NFL stadium in ......................................45-65 LasLAS Vegas and lure the Raiders from Oakland crossed a Business Calendar..............66 Parts....................................70 Auction Section ............74-83 Advertisers Index ..............82
major hurdle when a Nevada oversight committee voted unanimously to recommend $750 million in public funding for the project. The Southern Nevada Tourism Infrastructure Committee recommended raising the hotel tax in the Las Vegas area to help pay for a 65,000-seat domed venue that was promoted and would be partially financed by billionaire casino mogul Sheldon Adelson. Proponents still need see STADIUM page 24
Ritchie Bros. Auctioneers Incorporated and IronPlanet have jointly announced that they have entered into an agreement under which Ritchie Bros. will acquire IronPlanet for approximately $758.5 million, subject to customary closing adjustments. The deal is expected to be finalized in the first half of 2017. Following the announcement, Ravi Saligram, CEO of Ritchie Bros., and Gregory J. Owens, chairman and CEO
of IronPlanet, spoke to Construction Equipment Guide (CEG) about what the future holds. A Change in IronPlanet’s Plans Despite early indications that IronPlanet was to eventually go public, the company decided that the Ritchie Bros. plan was more desirable and a better investment for IronPlanet see ACQUISITION page 80
Page 2 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 3
"In Business for over 33 Years" www.hendrixmachineryllc.com 2005 John Deere 650J LGP, Stk#: 10178, OROPS, 6 Way Blade, 7,072 hrs., 28" Pads, 10' 9" Wide....................................................$42,500
1-936-327-5430 • Email: sales@hendrixmachineryllc.com
Se Habla 2014 Bomag BW177D-5, Stk#: 10325, EROPS, Español A/C & Heat, 66" Smooth Drum, 293 hrs., 14.9x24R3 Tires, 4 Cyl. Deutz Eng. ......$64,500
2008 John Deere 450J LGP, Stk#: 10227, EROPS, A/C, FM Stereo, 6 Way Blade, 2,487 hrs., 24" Pads, JD Winch, 9' 8' Wide ....$69,500
2010 John Deere 650J LT, Stk#: 10291, OROPS, 6 Way Blade, 3,517 hrs., 18" Pads, 8'9" Wide ......................................................$59,500
2005 Cat D6R XL, Stk#: 10184, EROPS, A/C, 2006 John Deere 650J XLT, Stk#: 10430, Sweeps, Rear Screen, S/U Tilt Blade, 10,906 2008 Cat D6N LGP, Stk#: 10462, OROPS, hrs., PACCAR PA56-E Winch S# 9505687, 10' 8" OROPS, Sweeps, Rear & Side Screens, 6 Way Sweeps, Rear Screen, 6 Way Blade, 8,332 hrs., Wide ......................................................$69,500 Blade, 3,537 hrs., 20" Pads, 8' 9" Wide $42,500 34" Pads, 13' 4" Wide ............................$76,500
2011 John Deere 700J LGP, Stk#: 10424, OROPS, 6 Way Blade, 5,372 hrs., 80% U/C, 30" Pads, 11 ft. Wide ..................................$69,500
2016 Cat 262D, Stk#: 10245, EROPS, A/C & Heat, Aux. Hyd., 36 hrs., 74" Bkt, 12x16.5 Rubber Tires, 74 hp., Cat C3.3BDIT Dsl Eng ......$44,500
2006 Skytrak 8042, Stk#: 8235, 8,000 lbs., 42 ft., 4WD, 4 WS, 5,507 hrs., 13.00x24 @ 60% Foam Filled Tires, Aux. Hyd., 48" Forks, 48" Frame, Hyd. Self Leveling System, 4 Cyl. Cummins Eng ......................................$29,500
2005 Cat D6R XL, Stk#: 10328, EROPS, A/C, Sweeps, Semi U-Tilt Blade, Ripper, 85% U/C, 10,988 hrs., 24" Pads, Rear D-6 Ripper, 10' 8" Wide ......................................................$69,500
1975 John Deere 570A, Stk#: 10019, EROPS, 2011 Cat 336DL, Stk#: 324, EROPS, A/C, 3,746 969 hrs., 12 ft. M/B w/Slide & Tip Control, 60% hrs., 58" Bucket, 24" Pads, 10' 6" Wide $97,000 Tires, 13.00x24 Tires, 6 Cyl. JD Eng. ..$17,500
2006 JLG 400S, Stk#: 10288, 500 lbs., 40 ft., 2,500 hrs., 4WD ....................................$18,500
2013 John Deere 35D, Stk#: 10421, EROPS, A/C & Heat, 1,671 hrs., 12" Bucket, Front Blade, Aux. Hyd., 12" Rubber Tracks, Quick Coupler, 3 Cyl. YanMar Eng. ..................................$36,500
2010 Cat D6T XL, Stk#: HR-292, EROPS, A/C, Sweeps, Rear Screen, St/Tilt Blade, 3,572 hrs., 24" Pads, Paccar PA56 Winch S#0701662, Cat C9 Eng................................................$129,500
2008 Cat D6T LGP, Stk#: HR-538, EROPS, A/C, Sweeps, Rear Screen, St./Tilt Blade, 6,341 hrs., Paccar Winch S#0801742, 36" Pads, 13' 4" Wide ..................................................$129,500
2003 Komatsu HM300, Stk#: 10223, EROPS, 2008 Laymor 8HC, Stk#: 10214, OROPS, 977 A/C, 10,817 hrs., 38,419 Miles, 23.5x25 Tires, Hrs, 8’ Broom, 4 Cyl. Kubota Diesel Eng............. 6 Cyl. Komatsu Eng., 11' 6" Height........$56,500 ..............................................................$14,500
2014 Cat D6K LGP, Stk#: HR-680, EROPS, A/C, Sweeps, Rear Screen, 6 Way Blade, 1,304 hrs., 30" Pads, 11' 10" Wide ........................$146,500
2015 Big Tex Dump, Stk#: 10249, 25,900 lbs. GVWR, Net Pay Load 17,340 lbs.,48" Spread Axle, 20 ft. L / 4 ft. Walls, 7' 9" W, Folding Rear 2014 Doosan LSC60HZ, Stk#: HR-582, We have 2013 John Deere 624K, 10238, EROPS, A/C & Gate w/Heavy Duty Ramps, D Rings Inside Trailer, several to choose from, St. 175x80R13 Tires, Heat, FM Stereo, 1,673 hrs., 8' 8" Bucket, ST235/85R16 Ries, Front Tool Box..........$14,500 3 Cyl. Kubota Eng. ..................................$3,850 20.5Rx25 Tires, 11 ft. Height ............$132,500
2015 Cat 272D, Stk#: 10449, EROPS, A/C, 316 hrs., 74" Bucket, Aux. Hyd., 12x16.5 Tires, 4 Cyl. Cat Eng ..................................................$46,500
2008 Cat D6T XL, Stk#: HR-629, EROPS, A/C, 6,915 hrs., Sweeps, Rear Screen, S/U Tilt Blade, 2010 Ditch Witch RT45, Stk#: 10330, OROPS, Ripper: D6H S#1EH04336, 24" Pads, 10' 9" Wide 732 hrs., 6" Trench, Slide Boom, 64" Tilt Blade, 3 ............................................................$129,500 Cyl. Deutz Eng., 26x12.00-12 Tires........$17,500
2012 John Deere 770G, Stk#: 10460, EROPS, A/C & Heat, FM Stereo, 3,869 hrs., 14 ft. M/B, Hyd. Sideshift, TIP Control, Push Block, Ripper, 17.5Rx25 Tires, JD Eng. ......................$139,500
2011 Doosan G25E-5, Stk#: 10455, 4,600 lbs., 7 ft., 42" Forks, 45" Frame, 5,681 hrs., 7.00x15 Front and 6.50x10 Rear Hard Rubber Tires, Doosan DOHC 16V Gas Eng. ................$14,500
2009 Komatsu PC300LC-8, Stk#: 282, EROPS, A/C, Front Screen, 9,999 hrs., 60" Bucket, 28" Pads, 10' 10" Wide ................................$96,500
2008 John Deere 700J LGP, Stk#: 10426, EROPS, A/C, FM Stereo, Sweeps, Rear & Side Screens, 6 Way Blade, 6,308 hrs., 30" Pads, 11 ft. Wide......................................$69,500
2011 Doosan G25ES, Stk#: 10454, ..4,600 lbs., 2011 Hitachi ZX350LC-3, Stk#: 10464, EROPS, 7 ft., 48" Forks, 45" Frame, 1,642 hrs., 7.00x15 A/C, 8,145 hrs., 60" Bucket, Aux. Hyd., 32" Pads, Front and 6.50x10, Rear Hard Rubber Tires, 11' 2" Wide ............................................$79,500 Doosan DOHC, 16V Gas Eng. ................$14,500
2008 Cat D6T XW, Stk#: 10444, EROPS, A/C & Heat, 6 Way V-Pat Blade, 9,956 hrs., Model D6MS Rear Ripper, 80% U/C, 30" Pads, 13' 6" Wide ..................................................$109,500
2016 Easy Kleen Mangum, Stk#: 10422, Gas Eng., 4000 PSI, 12 Volt, 15 hp., Hot Water Self Contained ................................................$2,850
2015 John Deere 700K XLT, Stk#: 10480, EROPS, A/C, FM Stereo, 6 Way Blade, 954 hrs., 22" Pads, Rear Ripper, 10 ft. Wide ......$139,500
2014 Cat 262D, Stk#: 10324, EROPS, A/C, 363 hrs., 72" Bucket, Aux. Hyd., 12x16.5 Tires, 4 Cyl. Cat Eng. ..........................................$39,500
2007 Ditch Witch RT40, Stk#: 9992, OROPS, 1,072 hrs., 64” Push Blade, 6” Trench, 26x12.00x12 Tires, 3 Cyl. Deutz Eng. ....$16,500
Page 4 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
IN THIS ISSUE
WESTERN EDITION Circulated Throughout
• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming
To read these stories and many more, visit www.constructionequipmentguide.com
FEATURES 6
FACEBOOK CHOOSES NEW MEXICO OVER UTAH FOR DATA CENTER
Facebook has chosen a village on the edge of New Mexico’s largest metropolitan area as the location for its new data center, an announcement that spread quickly as elected officials celebrated a hard-fought win that could have ripple effects for the state’s struggling economy.
8
CNH ENTERS MINI-EXCAVATOR AGREEMENT WITH HYUNDAI
15
76 78
18 BALFOUR BEATTY LANDS $697M CONTRACT TO
CNH Industrial announced an exclusive agreement with Hyundai Heavy Industries for the production and development of mini-excavators. This agreement completes CNH Industrial’s investment strategy for its excavator product portfolio expansion.
12 ODOT BRIDGES GAP BETWEEN STUDENTS, CONSTRUCTION INDUSTRY High school students recently learned more about future career opportunities in the construction industry by getting hands-on experience with industry experts.
14 GLACIER NATIONAL PARK CONSTRUCTION PROJECTS UNDER WAY The Daily Inter Lake reported that road closures began after the Labor Day holiday and will continue through May.
Balfour Beatty, an international infrastructure group, has been awarded a $697 million contract to undertake electrification of the 52-mi. (83.7 km) Caltrain rail corridor between San Francisco and San Jose, Calif., laying the foundations for the future operation of high speed trains.
46 HISTORY OF ARTIC DUMP TRUCKS: TRACTOR
20 USDOT ANNOUNCES $1B TO
54 CAT C2 SERIES ARTICULATED TRUCKS FEATURE
15 CALIFORNIANS TO VOTE ON $9B PROP 51 The California Public School Facility Bonds Initiative, also known as Proposition 51, will be on the Nov. 8, 2016, ballot in California as an initiated state statute.
16 GOLDEN 1 CENTER EARNS LEED
28 WASHINGTON-GRIZZLY CHAMPIONS CENTER WILL FEATURE STATE-OF-THE-ART AMENITIES Next year at this time, athletes at the University of Montana should have plenty to celebrate — the completion of the new $14 million Washington-Grizzly Champions Center.
16 BOARD APPROVES CONTRACT FOR VAN NESS
76 RITCHIE BROS. HOLDS TWO-DAY SALE IN FORT WORTH, TEXAS
IMPROVEMENT PROJECT The San Francisco Municipal Transportation Agency (SFMTA) Board of Directors approved a contract amendment that will allow the Van Ness Improvement Project to take the next step towards starting work on the project this fall.
With thousands of buyers from around the world participating in Ritchie Bros.’ eighth Texas auction of the year, Ritchie Bros. sold more than 4,400 equipment items and trucks for more than $54 million over two days in Fort Worth from Sept 21 to 22, 2016.
18 CUSTOM DREDGE FROM DSC KEEPS SANTA
78 ALEX LYON & SON HOLDS SEPTEMBER SALE IN DALLAS, TEXAS
CRUZ HARBOR CLEAR
Edwin M. McKeon Sr. Richard C. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com
Mobile
60 HITACHI LAUNCHES TRUCKS FOR LARGE-SCALE MINING OPERATIONS
WITH LARGE BODY
On Sept. 20, Alex Lyon & Son held a public auction in Dallas, Texas. Items for sale included dozers, loaders/backhoes, generators, lighting and more.
66 BUSINESS CALENDAR 72 CLASSIFIEDS 74 COMING AUCTIONS
EQUIPMENT 33 BOMAG Cedarapids CR662RM RoadMix 34 ROADTEC SB-2500e MTV
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site
LINK VIENNA TO BRNO
DEPARTMENTS
VICE PRESIDENT Honnen Equipment announced that Jon Asbury was elected vice president at a recent shareholder’s meeting.
Founder, Publisher & CEO Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.
59 WINDISCH SELECTS TEREX TRUCKS TO HELP
61 JOHN DEERE 460E DELIVERS BIG TIME
START IN 2017 Planned construction of a southern New Mexico road to Spaceport America is one step closer to taking place.
The United States Green Building Council (USGBC) certified Golden 1 Center, the new downtown home of the Sacramento Kings, as LEED Platinum — the highest level of global recognition for environmentally conscious buildings and organizations.
The winter of 2016 was an unusually harsh one for the Santa Cruz Small Craft Harbor in Santa Cruz, Calif.
56 FIND THE BEST ADT FINANCE OPTION
28 CONSTRUCTION ON SPACEPORT ROAD COULD
68 HONNEN EQUIPMENT ELECTS JON ASBURY
PLATINUM DESIGNATION
TO HEAVY-DUTY HAULER MORE POWER
EXPAND SAN DIEGO TROLLEY The U.S. Department of Transportation’s Federal Transit Administration (FTA) announced a $1.04 billion federal grant agreement with the San Diego Association of Governments (SANDAG) to extend existing Blue Line Trolley service from downtown San Diego to the growing University City area.
15 WORK PROGRESSES ON $2.1B CPMC PROJECT A $2.1 billion 740,000 sq. ft. (68,748 sq m) acute-care hospital and a $168 million 253,000 sq. ft. (23,504 sq m) medical office building are being constructed at California Pacific Medical Center’s Van Ness and Geary campus in San Francisco.
OFF-ROAD TRUCKS
ELECTRIFY CORRIDOR
YouTube
Kent Hogeboom
Dale Agnew
Dennis Hogeboom
Patrick Kiel
National Sales Manager
• Colorado• Louisiana • Oklahoma • Texas
• Arizona • California • Hawaii • Nevada • New Mexico • Utah
• Idaho • Montana • Oregon • Washington • Wyoming
Toll Free 877/877-4997 Fax 972/719-2611 e-mail dagnew@cegltd.com
315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com
602/679-8759 dennishogeboom@cegltd.com
Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from
Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 5
YOUR TRUSTED REBUILD PARTNER
CAS C A S H MAN EQUIPM EQ U I P M E N T
*Offers apply to to Cat parts and componentts only. Cannot be combined w wiith other offers. EExxpires 12/31/16. **Does not include ttrraveel ttiime and/or mileage; also ddooes not apply ttoo ro rope or hydraulic shovels ***Subject to to credit approval. Certain re resttrictions apply. Minimum $1,000 purchase rreequired.
th
AN A N N I VE RSARY R S A RY 1931-2016 © 2016 Caterpillar Caterpillar.. All Rights Reserved. CA CAT, T, CA CATERPILLAR, ATERPILLAR, TERPILLAR,, BUIL BUILT LTT FOR IT IT,, their respective logos, “Caterpillar YYellow,” eellow,” the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
1.800.937.2326 WWW.CASHMANEQUIPMENT.COM
Page 6 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Two States Battle...
Facebook Chooses New Mexico Over Utah for Data Center By Lindsay Whitehurst and Susan Montoya Bryan AssociAted Press
ALBUQUerQUe, N.M. Facebook has chosen a village on the edge of New Mexico’s largest metropolitan area as the location for its new data center, an announcement that spread quickly as elected officials celebrated a hard-fought win that could have ripple effects for the state’s struggling economy. News of the social media giant’s decision to build in Los
Lunas, just south of Albuquerque, comes after a roller-coaster contest between New Mexico and Utah to attract the facility. the courting of Facebook began more than a year ago with a meeting between republican Gov. susana Martinez and Facebook executives. during a visit to california, Martinez and her economic development team pitched the sparsely populated state as a good place to do business. New Mexico wasn’t on the radar before that August 2015
meeting. “With the improvements we’ve made over the past several years, New Mexico is finally competing again, and in this case, it’s a big win for the people of our state and our economic future,” the governor said. While the project has enjoyed broad political support in New Mexico, local leaders in Utah pushed back against a tax-incentive plan they saw as too generous. Utah supporters said the project would bring a high-tech cachet that could draw other companies to West Jordan, but critics said the cost was too high for land that could attract other development. the village of Los Lunas, meanwhile, agreed to give up all property taxes for 30 years in exchange for annual payments from Facebook that start at $50,000 and top out at less than $500,000. the complex economic development agreement also involves tax breaks on billions of dollars in computer equipment over time. in Utah, an initial $240 million tax-break plan publicly fell apart after several leaders said the lure was too rich. despite talks being revived, Utah Gov. Gary Herbert later said the deal looked dormant, if not dead. West Jordan Mayor Kim rolfe said he’s disappointed his city wasn’t chosen and the tax-break package was unfairly maligned. the billion-dollar project would have been an economic boon, he said. A critic of the Utah plan, salt Lake county Mayor Ben McAdams, said the cost to taxpayers was too steep. “We will walk away from a bad deal. We’re not so desperate that we’re willing to give everything away,” he said. the cost-benefit analysis is different for New Mexico, he said. New Mexico officials have appeared eager to please Facebook after the state was hit hard by a downturn in the oil and natural gas sectors. computer chip maker intel, meanwhile, has been steadily unwinding a major manufacturing plant that was an early beneficiary of similar property tax breaks using industrial revenue bonds. Los Lunas economic development director ralph Mims dismissed criticisms of the package state and local officials created to woo Facebook to New Mexico. “if you want to bring business in, you have to offer incentives,” Mims said. “this is the biggest thing since intel and you have to look at the economic development spillover. it’s not just about the data center.” data centers are key to the booming cloud-computing economy, but they typically bring few local jobs. officials hope Facebook construction will spill over into other parts of the economy, including three industrial-scale solar power plants that would be built to offset electricity consumed by the data center. Los Lunas officials have said the center would be a $1.8 billion construction project creating 300 direct temporary jobs and just 50 permanent jobs. construction is expected to start next month, with the center coming online in late 2018. Whitehurst reported from salt Lake city, Utah. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 7
> ÊÕÃÊÌ `>ÞtÊ ÀÞ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ
ww ww.RBused.com
Celeb bratiing g our 30th Year!
1999 CAT 953C LGP, #91202, CAB/AC, SINGLELEVER, GP BUCKET, 8,100 HRS ..............$79,500
2011 CAT 953D, #82108, CAB/AC, SINGLELEVER, 2,000 HRS ................................$197,500
1990 CAT 963 LGP, #91618, CAB/AC, GP BUCKET, RIPPER, NEW ENGINE, NEW A/C, 11,600 HRS..........................................................$49,500
2010 KOMATSU D39PX-22, #92323, OROPS, 6-WAY BLADE, 3,700 HRS ......................$62,500
2008 KOMATSU D51EX-22, #82275, CAB/AC, 20" SHOES, PAT BLADE, REAR HYD, KOMTRAX, 5,850 HRS ..................................................$99,500
2005 KOMATSU D61PX-15, #91005, CAB/AC, 2006 KOMATSU D65EX-15E0, #92285, CAB/AC, 6-WAY BLADE, 34" TRACKS, 5,700 HRS .............. RIPPER, 26" SHOES, SEMI-U BLADE, SWEEPS, ..............................................................$119,500 9,000 HRS ..............................................$97,500
1972 CAT 977L, #82789, OROPS............$16,500
2009 KOMATSU PC160 LC-7AE0, #82212, 2004 KOMATSU PC200 LC-7, #81536, CAB/AC, CAB/AC, MECH THUMB, KOMTRAX, 6,100 HRS .. 31.5" SHOES, 9' 7" ARM, HYD THUMB, 5,500 ................................................................$84,500 HRS........................................................$126,500
2007 KOMATSU PC300 LC-8, #81926, CAB/AC, 10' ARM, REAR CAMERA, 7,000 HRS ..$149,500
2012 KOMATSU PC360 LC-10, #81990, CAB/AC, 33.5" TRACKS, 10' 6" ARM, KOMTRAX, REAR CAMERA, 3,100 HRS ............................$199,500
1994 CAT 988F, #92284, EROPS, A/C, STEER, S.T.I.C., AUTO SHIFT, ENGINE ENCLOSURES, LIGHTING, 10,000 HRS ........................$129,500
2004 KOMATSU WA250-5, #82198, CAB/AC, Q/BUCKET, 4,200 HRS ............................$69,500
2011 KOMATSU WA380-6, #81996, CAB/AC, GP BKT, 23.5-25 TIRES, KOMTRAX, 7,700 HRS .... ..............................................................$129,500
2004 VOLVO L330E, #92283, 141" SPADENOSE BUCKET, 35/65-33 TIRES, VOLVO D16 BLADE 2 ENGINE, 18,600 HRS ..............................$79,500
Page 8 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM
4 Tool Boxes Available All Include Slugs and O'Rings.
For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com
www.flangelock.com
CNH Enters Mini-Excavator Agreement With Hyundai CNH Industrial announced an exclusive agreement with Hyundai Heavy Industries for the production and development of mini-excavators. This agreement completes CNH Industrial’s investment strategy for its excavator product portfolio expansion. The two companies will benefit from synergies in product development, sourcing, manufacturing and possible future powertrain opportunities. CNH Industrial also will have the opportunity to produce mini-excavator models of up to five tons (4.5 t) at its plants and source OEM models above 5 tons. The agreement has a 10 year term, with a three year renewal option. It applies globally, excluding the South Korean market. Once fully realized, the mini-excavator product offering will include 14 models ranging from 1 to 6 tons (.9 to 5.4 t). “This relationship brings together the know-how and expertise of two leading global construction equipment manufacturers, allowing us to take advantage of synergies in terms of technology selection and adaptation, component sourcing, and research and development costs. Our abili-
The two companies will benefit from synergies in product development, sourcing, manufacturing and possible future powertrain opportunities. ty to manufacture and source from our geographically complementary industrial base will allow for scale advantages in product costs to be realized, while ensuring that product lead times and logistics costs are minimized for our dealer network,” said Rich Tobin, chief executive officer, CNH Industrial. For more information, visit www.cnhindustrial.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 9
ARIZONA Bejac Corporation www.bejac.com PHOENIX (800) 77-BEJAC CALIFORNIA Bejac Corporation www.bejac.com PLACENTIA (800) 77-BEJAC SACRAMENTO (800) 77-BEJAC REDDING (800) 77-BEJAC
SAN FRANCISCO (800) 77-BEJAC FRESNO (800) 77-BEJAC SAN DIEGO (800) 77-BEJAC
COLORADO Power Screening, LLC www.powerscreening.com HENDERSON (800) 231-5005 MONTANA Westate Machinery www.westate.com BILLINGS 406-373-6010 (800) 999-6676 NEVADA Liebherr Mining Equipment www.liebherr.us ELKO (775) 738-7386 Bejac Corporation www.bejac.com RENO (800) 77-BEJAC NEW MEXICO Nueces Power Equipment www.nuecespower.com (888) 398-9806 Power Screening, LLC www.powerscreening.com ALBUQUERQUE (505) 345-4467 OREGON Orion Equipment www.orion-equip.com SEATTLE (800) 280-8124 TEXAS Nueces Power Equipment www.nuecespower.com CORPUS CHRISTI EDINBURG (361) 289-0066 (888) 810-5134 VICTORIA EL PASO (361) 433-0672 (888) 645-5479 LAREDO SAN ANTONIO (888) 409-5662 (210) 807-8216 SAN BENITO HOUSTON (888) 810-5134 (713) 481-4718 BANE Machinery Inc. www.banemachinery.com/ TYLER DALLAS (214) 352- 2468 (903) 597-6641 FT WORTH (817) 847-5894 UTAH Power Equipment Company www.power-equip.com WEST JORDAN (801) 280-4105 WASHINGTON Orion Equipment www.orion-equip.com SEATTLE (800) 280-8124 WYOMING Power Equipment Company www.power-equip.com CASPER (800) 883-9275
Page 10 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WEDNESDAY, OCTOBER 19, 2016 22nd Annual
N.Y.S. HIGHWAY & PUBLIC WORKS
EXPO PRODUCED BY PROFILE PUBLICATIONS
Lunch Served From 12:00pm - 1:30pm Center of Progress Building • NY State Fairgrounds, Syracuse, NY
Lunch Sponsored By:
Stadium International Trucks • Tracey Road Equipment Trux Outfitter • Vantage Equipment Dozens of Door Prizes from Exhibitors Win Two Grand Prizes First Second (2) Grandstand Tickets to NASCAR Watkins Glen Race in August 2017, including (2) Pit Road Passes.
A Pair of Tickets to a Buffalo Bills vs. Miami Dolphins Football Game on Saturday, December 24th, 2016 in the Jim Kelly Club. Produced by
Call for Exhibit Space Today! Contact: Bob Buckley 800-992-7116 or E-Mail: bbuckley@cegltd.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 11
Page 12 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Government Study Concludes...
$57M Project to Help Endangered Fish Might Not Work By Matthew Brown ASSOCIATED PRESS
BILLINGS, Mont. (AP) A government-commissioned study concluded there’s substantial risk that a $57 million dam and fish bypass proposed on the Yellowstone River won’t meet its goal of helping an ancient, endangered fish species. An independent panel of scientists and engineers conducted the peer-review study for the U.S. Army Corps of Engineers. They said the agency provided no evidence the proposed bypass near the Montana-North Dakota border would help pallid sturgeon reach upstream spawning grounds. The dinosaur-like fish for decades have been prevented from moving upstream by a rock weir called the Intake Diversion Dam. The weir is a porous, rock structure that diverts water for an irrigation system serving more than 50,000
acres of cropland in eastern Montana and western North Dakota. Officials with the Army Corps and U.S. Bureau of Reclamation contend that replacing the weir with a concrete dam would ensure area farmers can keep getting water, while the rock-lined bypass channel would help sturgeon get around the structure. Army Corps project manager Tiffany Vanosdall said the report has not swayed agency officials who back the dam and bypass channel. She said the agency will provide members of the panel with additional research, including details on fish passages elsewhere that have been used successfully for species protection. The panel’s report “helped us understand some more of the information we needed to provide,” Vanosdall said.
The independent panel said after reviewing the proposal that it relies on untested assumptions and there’s no way to know if it would work. “There is no evidence that the behavior of adult fish can be manipulated to attract them to the bypass channel, that they would be motivated to swim upstream through the bypass channel, or that they would navigate upstream through the proposed bypass channel,” panel members said in the 74page report. The panelists also questioned whether the helpless, newly born larvae of any pallid sturgeon that got through the bypass would survive as they drifted back downstream and over the dam. Wayne Hubert, a fisheries consultant from Wyoming and member of the peer-review panel, said the group performed the work under a confidentiality agreement that bars its member from com-
menting publicly on their findings. Pallid sturgeon are known for a distinctive, long snout and can live 50 years, reaching 6 ft. (1.8 m) in length. Believed to date to the days when Tyrannosaurus Rex walked the Earth, the population declined sharply during the past century as dams were built along the Missouri River system. They were listed as an endangered species in 1990. U.S. District Judge Brian Morris blocked construction of the dam and bypass just as it was set to begin last year. The judge intervened after Defenders of Wildlife and the Natural Resources Defense Council sued to stop the project. The two groups have proposed installing pumps and other equipment to deliver irrigation water to area farmers as an alternative to the irrigation dam and fish bypass. A group of government biologists said recently that removing the weir and letting the
Yellowstone flow freely is the best way to help pallid sturgeon avoid extinction. Sturgeon inhabiting the lower Yellowstone have been essentially trapped downstream of the rock weir since it was built in 1905. At least one female fish managed to swim around the structure during high water in 2014, but that was considered a rare occurrence. Removing the weir would open up 165 river mi. (265.5 km) for sturgeon to spawn upstream. David Brooks of Montana Trout Unlimited said such a move represents the most viable option for saving the sturgeon. “The evidence that the [Army Corps] has put forth to support the bypass channel alternative is completely theoretical,” Brooks said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
ODOT Bridges Gap Between Students, Construction Industry High school students recently learned more about future career opportunities in the construction industry by getting hands-on experience with industry experts. The Oklahoma Department of Transportation Civil Rights Division, in partnership with several industry leaders, hosted a Construction Career Day for students in the Oklahoma City metro area in an effort to bridge the gap between students and the construction industry. This year’s 15th annual Construction Career Day, called “Tools to Build Your Future” offered hands-on activities with construction equipment and opportunities for more than 260 high school students to talk with industry leaders about jobs in construction-related fields. This year’s event included more than 35 construction companies, materials suppliers and industry partners. Students from Oklahoma City Public Schools and a local technology center attended the event held at the Oklahoma State University – OKC campus. Students were able to operate machinery; climb electrical poles; try their hand at virtual welding; and visit with industry leaders in construction and engineering. The construction industry is facing a
High School students enjoy an interactive experience at the 15th Annual Construction Career Day, called “Tools to Build Your Future” hosted by Oklahoma Department of Transportation and multiple industry leaders. The event offered hands-on activities with equipment and opportunities for students to talk about jobs in construction-related fields.
severe shortage of skilled workers. If not addressed, the shortage will impact the industry’s quality, safety and ability to build
the infrastructure needed to meet the demands of a growing population. While many students may not have ever considered
a career in construction, the industry offers competitive wages and a variety of employment opportunities for high school graduates. “This event has been a huge success due to all our industry partners, the Oklahoma City public school system and all the volunteers,” Jenny Allen, ODOT Civil Rights Division Manager, said. “The event offers the chance to educate students about opportunities in the transportation and construction industry and helps with employment skills while underscoring the importance of furthering their education.” The students are specifically selected by their instructors because of their interest in construction. Students wishing to attend the event next year should talk with their teachers and reach out to the ODOT Civil Rights Division 405-521-3186. This event was sponsored by ODOT, OSU – OKC, OKC Public Schools, Association of Oklahoma General Contractors – Heavy Highway, AGC – Building Chapter, Oklahoma Asphalt Pavement Association and the Oklahoma Concrete Pavement Association. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 13
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Liebherr HS 855 HD Dragline, 1:50 Scale $325 Caterpillar 330D L Excavator, 1:50 Scale - $110
Link Belt 800X2 Excavator, 1:50 Scale - $185
Caterpillar D4 Tractor with 4S Bulldozer, 1:16 Scale - $200
Caterpillar MH3049 Material Handler with Magnet, 1:50 Scale - $125
Allis Chalmers HD-21 Dozer, 1:50 Scale - $85
Volvo L60H Wheel Loader, 1:50 Scale - $100
Caterpillar CT660 Red Dump Truck, 1:50 Scale - $100
Caterpillar 320D L Excavator, 1:50 Scale - $100
Caterpillar 910K Wheel Loader, 1:32 Scale - $100
Caterpillar D9T Track-Type Tractor, 1:50 Scale - $125
Caterpillar CT660 Yellow Dump Truck, 1:50 Scale - $100
Komatsu D475A Dozer, 1:50 Scale - $60
Bomag BW213D-2 Vibratory Roller, 1:50 Scale - $60
Allis-Chalmers TS-300 Motor Scraper, 1:50 Scale - $110
Liebherr R954 Excavator, 1:50 Scale - $75
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Email – bmckeon@cegltd.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Page 14 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
#M B O D I B S E.B D I J O F S Z D P N 6T F E
#"/$)"3%
› ŗš
Glacier National Park Construction Projects Under Way
KALISPELL, Mont. (AP) A number of construction projects at Glacier National Park are under way. The Daily Inter Lake reported that road closures began after the Labor Day holiday and will continue through May. A segment of roadway between the two entrances into the St. Mary Visitor Center parking area will be closed for con-
struction from Sept. 19 of this year to May 26, 2017. Part of the Trail of the Cedars was closed on Sept. 6. The road to the Avalanche Campground was closed Sept. 20. And the Going-to-the-Sun road will be closed to vehicular traffic on the east side from Oct. 17 through May 26. Park officials said visitors should expect mild delays
because of the various projects. For more information, visit http://www.dailyinterlake.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
97
Crescent City
395 139
5
101 299 89
Burney Eureka 299 Rio Dell
CALIFORNIA STATE SECTION
395
299 44
44 36
101
89
Leggett
99
395
70
Chico
Oroville
5
49
Fort Bragg Point Arena 20 1
89
80 Tahoe City Auburn 50 South Lake Sacramento Tahoe
65
101
70 5
Santa Rosa
505 80
99
395 49
680
San Francisco
Sonora
Berkley 580 Oakland 280
120 120
120
6
Modesto
880
San Jose
140
99
41
5
101 1
395 152
Madera
Santa Cruz Montery
Fresno
33
180
190
198
Death Valley Junction
King City
1
Lucia
198
65
101 127 46
178 15
14
San Luis 33 Obispo Santa Maria
Bakersfield
Baker
395
58
5
Barstow
101
40
15
1
14
Santa Barbara
Ventura
95
Glendale San Bernadino Los Angeles Riverside Santa Monica Santa Ana 10 Palm Springs Long Beach 1
“The Nation’s Best Read Construction Newspaper… Founded in 1957.”
101
10
5
15
86
Oceanside
Your California Connection – Dennis Hogeboom – 1-877-7CEGLTD – dennishogeboom@cegltd.com
San Diego 8
Work Progresses on $2.1B CPMC Project By Chuck Harvey CEG CORRESPONDENT
A $2.1 billion 740,000 sq. ft. (68,748 sq m) acute-care hospital and a $168 million 253,000 sq. ft. (23,504 sq m) medical office building are being constructed at California Pacific Medical Center’s Van Ness and Geary campus in San Francisco. The two buildings are adjacent and will be connected by an underground pedestrian walkway under Van Ness Avenue. The sustainably-designed 12-story hospital will hold 274 patient beds and feature women’s, children’s, cardiology, oncology, emergency care and transplant departments. The medical office building will stand nine stories tall and will accommodate outpatient services and support the medical staff next door. The project includes 376,000 sq. ft. (34,931.5 sq m) of underground parking space. see HOSPITAL page 22
Excavation activity for the Medical Office Building across the street from the Van Ness and Geary Campus hospital.
Californians to Vote on $9B Prop 51 The California Public School Facility Bonds Initiative, also known as Proposition 51, will be on the Nov. 8, 2016, ballot in California as an initiated state statute. • A “yes” vote supports the state issuing $9 billion in bonds to fund improvement and construction of school facilities for K-12 schools and community colleges. • A “no” vote opposes the state issuing $9 billion in new debt to fund the improvement and construction of education facilities. Bond Money Purposes The proceeds from the $9 billion in bonds that would be issued if voters approved Proposition 51 would be stored in a 2016 State School Facilities Fund and a 2016 California Community College Capital Outlay Bond Fund. Proceeds would be allocated for the following purposes: • $3 billion for the construction of new school facilities • $500 million for providing school
facilities for charter schools • $3 billion for the modernization of school facilities • $500 million for providing facilities for career technical education programs • $2 billion for acquiring, constructing, renovating, and equipping community college facilities. Total Cost of the Bonds The state’s legislative analyst estimated that the $9 billion in bonds would cost $17.6 billion to repay. The fiscal impact statement estimated $8.6 billion in interest. The statement also stated that the bonds would cost the state approximately $500 million per year. Background Since 1914, 42 education-related bond measures have appeared on the ballot in California, and all of them were legislatively-referred. In 2014, legislators tried to place a legislatively-referred bond act that called for $9 billion for school maintenance and construction on
the ballot. The legislation passed the California State Assembly, but Gov. Jerry Brown opposed it before it could pass the California State Senate, and so it did not qualify for the 2014 ballot. The California Public School Facility Bond Initiative will be the first educationrelated bond measure to appear on the ballot since 2006, and it is the first ever education-related bond measure that was citizen initiated. Ballot Title The ballot title is: School Bonds — Funding for K-12 School and Community College Facilities Initiative Statute. Ballot Summary The long-form ballot summary is as follows: • Authorizes $9 billion in general obligation bonds: $3 billion for new construction and $3 billion for modernization of K-12 public school facilities; $1 billion for charter schools and vocasee VOTERS page 23
Page 16 • October 2, 2016 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide
Golden 1 Center Earns LEED Platinum Designation The United States Green Building Council (USGBC) certified Golden 1 Center, the new downtown home of the Sacramento Kings, as LEED Platinum — the highest level of global recognition for environmentally conscious buildings and organizations. The Sacramento Kings commitment to power the arena entirely with solar energy, in addition to its resource conservation, transportation planning and green design led Golden 1 Center to be the first indoor venue in the world to receive the LEED Platinum certification. Unlike most LEED Certified buildings, Golden 1 Center will demonstrate environmental leadership to an estimated 1.2 million visitors each year at over 200 events. “Our hope in creating Golden 1 Center was to help drive meaningful change in our community — which includes working to curb climate change and promote renewable energy,” said Vivek Ranadivé, Kings owner and chairman. “Businesses, including large sports franchises, have a core responsibility to help facilitate the world’s clean energy transition so that we can better protect the health and environment of future generations. The 1.2 million people who will pass through our doors each year will see first hand how adopting the best sustainability practices can improve the fan experience.” To achieve the highest LEED certification, projects must earn more than 80 points on a scale that evaluates energy management, water efficiency, environmental quality, transportation, materials utilized and more. Golden 1 Center earned enough points to receive platinum designation — placing it in the top three percent of all buildings certified and the highest total for any sports facility in the world. “California has more green buildings than any other state in the nation and Sacramento’s new arena is an example of the elegant design and construction we need to meet our ambitious climate goals,” said Gov. Jerry Brown. Golden 1 Center will achieve many firsts in sports facility design. Working alongside architect AECOM, the Sacramento Kings focused on creating never-before-seen sustainability features that take advantage of Sacramento’s resources. The arena will be the first in the world to combine
“Our hope in creating Golden 1 Center was to help drive meaningful change in our community — which includes working to curb climate change and promote renewable energy.” Vivek Ranadivé Sacramento Kings
the use of displacement ventilation — a reduced-energy cooling system utilizing passive climate controlled air — and crowd sourced feedback to maximize fan comfort. Five massive hangar doors above the grand entrance will open and allow the arena to use natural cooling phenomenon in Sacramento — The Delta Breeze — to control the building’s climate efficiently. With over 300 days of sunshine in Sacramento, the arena’s urban-smart energy system — with a specially designed 1.2 megawatt solar array on the arena roof and an 11 megawatt solar farm 40 mi. (64.4 km) away through a SMUD partnership — provides a creative solution for generating the power for the venue’s over 200 events all year long. A thirteen-month environmental impact analysis of Golden 1 Center’s site found the Sacramento Kings decision to move the arena downtown will reduce average miles traveled per attendee by 20 percent, cut overall air emissions by 24 percent, and reduce travel-related greenhouse gas emissions per attendee by 36 percent by 2020. In total, the Sacramento Kings’ architectural choices are estimated to keep nearly 2,000 tons (1,814 t) of greenhouse gas emissions annually out of the atmosphere — equivalent to emissions from approximately 4 million vehicle mi. (6.6 million km).
“We worked with the Kings to design Golden 1 Center for fans, city and planet,” said Bill Hanway, AECOM’s global sports leader. “Our architects, sports designers, sustainability experts, engineers, urban planners and landscape architects worked together from the beginning to shape an indoor-outdoor arena that is revitalizing downtown Sacramento and setting a new global standard for sustainability.” In the past year, the Sacramento Kings have announced a series of unprecedented commitments to sustainability, including a “Farm-to-Court” plan to source ninety percent of Golden 1 Center’s concessions from local businesses and farms within 150 mi. (241.4 km) of the arena, recycling athletic shoes to create a new resilient court, and partnering with industry leaders like the Green Sports Alliance. They also are working with leaders in food sustainability like Californiabased Sierra Nevada brewery, to provide locally brewed beer and create a green education curriculum for local students. Other key sustainability statistics for Golden 1 Center include: • First professional sports venue to be completely powered by solar energy • Water conservation resulting in a 45 percent reduction in use over stringent California code • 30 percent reduction in energy use over the stringent California Title 24 code requirements • 2,000 fewer tons of annual carbon emissions • 99 percent of demolition materials recycled • 95 percent of construction waste diverted • 36 percent of construction materials from recycled sources • 30 percent of construction materials from regional sources • 90 percent of food and beverage concessions sourced from within 150 mi. • First venue to crowd source feedback to maximize fan comfort and reduce energy consumption. For more information, visit Golden 1 Center.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Board Approves Contract for Van Ness Improvement Project The San Francisco Municipal Transportation Agency (SFMTA) Board of Directors approved a contract amendment that will allow the Van Ness Improvement Project to take the next step towards starting work on the project this fall. This action extends the current contract between the agency and Walsh Construction. “This is another important step in improving our transportation network for everyone,” said Tom Nolan, chairman of the SFMTA Board of Directors. “This project is an essential bus rapid transit option for customers that will create raillike service on a major corridor in the city.” “This project is a critical step in
realizing our goals of improving transportation from the ground up,” said Ed Reiskin, SFMTA director of transportation. “Van Ness will see better transit, safer streets and strengthened infrastructure that will improve the transportation network and keep our city in a state of good repair.” The Van Ness Improvement Project is a major civic improvement project on Van Ness Avenue from Aquatic Park to Mission Street and according to SFMTA documents, will cost $316.4 million. The anticipated three-year construction schedule will include transportation upgrades like San Francisco’s first Bus Rapid Transit system, a globally proven solution
to address traffic congestion and transit reliability. The project is expected to cut travel times for the 49 and 47 Muni routes by 32 percent saving Muni customers an estimated 1,887 hours of travel time every day. The project also will include enhanced traffic signals optimized for north-south traffic with Transit Signal Priority that keep buses moving by extending a green light and high quality boarding islands at consolidated transit stops located at key transfer points. These features will complement the quicker boarding already brought by Muni’s system-wide all-door boarding policy and new low-floor buses.
The project also includes replacing the aging water and sewer lines beneath Van Ness. These networks are more than 100 years old and were not built to withstand a major earthquake, nor the impacts of climate change such as intense rainstorms. Safety enhancements that support the agency’s Vision Zero policy to end all severe traffic injuries and fatalities by 2024 also will be installed along the corridor. These will include protected median refuges, Accessible Pedestrian Signals, high-visibility zebrastriped crosswalks, and sidewalk extensions that shorten crossing distances for people walking. For the first time on Van Ness, side-
walk lighting will be installed, making it safer for people to walk at night. With the new contract in place, construction is expected to start this November, with revenue service beginning in late 2019. Funding for the core Van Ness BRT project comes from a variety of sources including FTA Small Starts, San Francisco Prop K funds through the San Francisco County Transportation Authority, and developer contributions. For more information, visit www.sfmta.com/vanness. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • October 2, 2016 • Page 17
Looking for a Full Service Dealership? DEDICATED TO OUR CUSTOMER’S SUCCESS • New Equipment • Used Equipment • Rentals • Attachments •
Westrax Machinery has since become a premier dealer for your new and used equipment sales, service and parts. We are proud to announce a new partner Kawasaki-KCM and their full line of wheel loaders. Kawasaki-KCM only manufactures top of the line wheel loaders, therefore they eat, breathe and sleep Kawasaki. We knew it was that dedication which would make a great partner in 2016.
HUGE PARTS INVENTORY FULL SERVICE SHOP MOBILE SERVICE AVAILABLE
LA Business Journal Top 100 fastest growing businesses 2014 & 2015! Rancho Dominguez Location 19618 South Susana Road Rancho Dominguez, CA 90221 (310) 605-2900
Corona Location 19885 Temescal Canyon Road Corona, CA 92881 (951) 213-3707
Page 18 • October 2, 2016 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide
Custom Dredge From DSC Keeps Santa Cruz Harbor Clear The winter of 2016 was an unusually harsh one for the Santa Cruz Small Craft Harbor in Santa Cruz, Calif. Four years of drought was followed by an El Niño season that brought storm water runoff, high tides, high surf and swells — rapidly creating a complete shoaling of the federal entrance channel to the harbor and blocking all boats from entering or leaving. The dredge “Seabright” that had served the harbor for 30 years labored to keep up, and frequent breakdowns only compounded the problem. Fortunately for the harbor members and visitors, a new dredge from DSC Dredge LLC — the “Twin Lakes” — was scheduled for delivery in June. “In the Santa Cruz Harbor, the inlet can sand in with just one storm, closing off the harbor and creating the worst conditions imaginable for dredging,” said Charles Johnson, director of domestic sales for Reserve, La.-based DSC Dredge. “The channel should have a depth of 20 feet at low tide. There were times this winter when the depth was only a foot or foot-and-a-half. The Seabright, which also was built by DSC 30 years ago, was struggling to keep the channel clear, but it really was at the end of its useful life.” Winter shoaling has been an issue for the harbor since it was dedicated in 1964. It resides in an area of the California coastline where there are no natural features to protect a deep entrance. For a number of years, the harbor relied on contract dredging supported by the federal government and the Port District. With uncertainties surrounding funding each year, the District began setting aside money to help purchase a dredge for
A new dredge from DSC Dredge LLC — the “Twin Lakes” — was delivered to the Santa Cruz Harbor in June.
the harbor. Sharing the cost of a new dredge with the federal government, the District took delivery of the Seabright in 1986. The Twin Lakes, commissioned from DSC in April 2015, was christened on July 20 this year. It is a custom-built, 16 by 16 ft. (4.8 by 4.8 m) dredge with a hull-mounted pump. It features a PLC operating system with color touch-screen controls, Global Positioning System (GPS), electro-proportional hydraulic circuits, high-capacity service water system and an inline direct marinestyle transmission for dredge pump gear ratio reduction. A planetary winch provides the swing operation. A magnetic flow meter shows the operator the velocity of the mate-
rial being moved, providing information on the dredge’s efficiency. With two engines — a Caterpillar C32 dredge pump marine diesel engine and a Caterpillar C18 marine dieselpowered electric generator — the dredge fully complies with federal EPA and California CARB environmental standards. “With the launch of the Twin Lakes in June, the harbor members will now have a much easier time with winter storms. In addition, because dredged sand is pumped from the harbor to nearby Twin Lakes State Beach, the area beaches benefit from the provision of fresh sand,” noted Johnson. Dredging at the harbor typically begins in November and concludes in March or April.
The Seabright, which had never left the Santa Cruz Harbor during its 30 years of service, was sold on Craigslist to a Palo Alto company for $5,000. DSC Dredge LLC advances the engineering, automation, manufacturing and quality of cutter suction and underwater pump mining dredges. The company operates from three major manufacturing facilities located in Reserve, La.; Poplarville, Miss.; and Greenbush, Mich. For more information, visit www.dscdredge.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Balfour Beatty Lands $697M Contract to Electrify Corridor Balfour Beatty, an international infrastructure group, has been awarded a $697 million contract to undertake electrification of the 52mi. (83.7 km) Caltrain rail corridor between San Francisco and San Jose, Calif., laying the foundations for the future operation of high speed trains. This is the largest contract secured by Balfour Beatty in the United States. The Peninsula Corridor Joint Powers Board awarded the contract to Balfour Beatty as part of the Caltrain Peninsula Corridor Electrification Project. The electrification of the line will bring cleaner, high performance electric vehicles to Caltrain’s fleet allowing for a more frequent service. Reliability
and capacity of the rail service, which operates through 17 U.S. cities across San Francisco, San Mateo and Santa Clara counties, also will be enhanced. “Our extensive experience in managing complex rail projects leaves us well qualified to deliver this significant scheme,” said Leo Quinn, Balfour Beatty Group chief executive. “Caltrain builds on the back of the recent successful delivery of our part in the multi-billion dollar Eagle P3 Commuter Rail network in Denver, Colo. “We are pleased our unique capability has been recognized with this award which contributes to our strategy to increase our design-build rail market share
struct two traction power substations, one switching substation and seven paralleling substations. With minimal disruption to the 92 daily Caltrain trains serving more than 65,000 commuters daily, the company also will replace signal systems and earth existing facilities as part of the process to electrify the 52 mi. of existing corridor. The project is due to start this fall with completion expected in spring 2020. A workforce of more than 300 will be employed at project peak which will include 50 A diesel Caltrain locomotive currently operating on the San apprentice opportunities. Francisco to Santa Clara rail route. (This story also can be found across the U.S.” AC overhead catenary system to on Construction Equipment Balfour Beatty Infrastructure serve as the power source for the Guide’s website at www.conInc. will design and build a 25kv new high speed trains and con- structionequipmentguide.com.)
Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • October 2, 2016 • Page 19
2044 S Vineyard Ave. Ontario, CA 91761 (909) 930-1822
www.nixon-egli.com
800 E. Grant Line Rd Tracy, CA 95304 (209) 830-8600
Specializing in Road Construction, Cranes & Municipal Equipment We sell the best names in the industry, all backed by our complete parts inventory and factory-trained service personnel.
COMPACTORS
CRANES
PAVERS
COLD MILLING MACHINES
MOBILE CRUSHERS & SCREENS
PAVERS
Page 20 • October 2, 2016 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide
HEavy EqUIpMEnt Since 1962
REntaLS
USDOT Announces $1B to Expand San Diego Trolley
Serving the Construction & Mining Industries
The U.S. Department of Transportation’s Federal Transit Administration (FTA) announced a $1.04 billion federal grant agreement with the San Diego Association of Governments (SANDAG) to extend existing Blue Line Trolley service from downtown San Diego to the growing University City area.
Former Rental Units for Sale:
2006 DEERE 450J LT, Cab, AC, dual VEECO slopeboards on PAT dozer, Hrs: 5,220, Serial #: X135691, Stock #: 5139 ..............$59,000
2003 CAT 315CL, Work ready 36000lbs HEX with cab, AC, GP Bucket. Hrs: 6,000, Serial #: CJC00104, Stock #: 7092 ................$49,000
1999 CAT 950G, Work ready 3.5yd loader with cab, AC, Hrs: 8,570, Serial #: 4BS00509, Stock #: 6249 ..........................$69,000
1997 CAT D6R, CHECK NEW LOW PRICE! EROPS Cab, AC, 6S Dozer w/ tilt, Hrs: 9,800, Serial #: 3ZN00526, Stock #: 5741 ..$95,000
2002 CAT 320CL, Work ready, cab, AC, reach boom, med stick, Hrs: 6,701, Serial #: FBA00177, Stock #: 7138 ................$69,000
2003 CAT 365BL ME II, Series II Mass Ex , Cab, AC, cab guards, Tier 2 eng, Hrs: 8,153, Serial #: JMB00328, Stock #: 7645 $159,000
2001 CAT 14H, AC, cab, ripper/scarifier, push-block, 14' mold-board, Hrs: 15,400, Serial #: 7WJ01640, Stock #: 4116 $149,000
1991 CAT 631E, Work ready, one of five with cab, AC, 37.25-35 tires, Hrs: 28,000, Capacity: 31 yd3, Serial #: 1NB00761$79,000
2003 CAT 950G II, Excellent, versatile, cab, AC, Hrs: 9,800, Serial #: AXX00290, Stock #: 6269..................................................$90,000
(888) 361-4454 • Mike Kustura: sales@EccoEquipment.com
www.eccoheavyequipment.com Santa ana, Ca – Hq (714) 554-4851
visalia, Ca (559) 651-0116
San Diego, Ca (619) 205-2026
Las vegas, nv (702) 877-4302
Edmonton, aB (780) 490-6965
Riverside, Ca (951) 276-9025
Stockton, Ca (510) 516-5567
phoenix, aZ (602) 276-2040
Salt Lake City, Ut (801) 796-7368
Ft. McMurray, aB (780) 598-0132
Coachella, Ca (760) 578-1043
Sacramento, Ca (916) 997-7492
Bullhead City, aZ (928) 715-0672
Boise, ID (208) 459-3800
Williston, nD (701) 572-8126
The U.S. Department of Transportation’s Federal Transit Administration (FTA) announced a $1.04 billion federal grant agreement with the San Diego Association of Governments (SANDAG) to extend existing Blue Line Trolley service from downtown San Diego to the growing University City area. The extension will improve access to employment hubs and numerous educational and medical facilities north of downtown, making it easier for people to travel throughout the city. Carolyn Flowers, FTA acting administrator made the announcement to commit the funds during a ceremony with representatives from SANDAG and the San Diego Metropolitan Transit System (MTS), which will operate the service once it is built. “The Obama Administration is committed to investing in transportation projects that improve mobility and provide ladders of opportunity for residents,” said U.S. Transportation Secretary Anthony Foxx. “San Diego’s Trolley extension will do just that by helping thousands of transit riders to access employment, education, healthcare and other important services.” The 10.92-mi. (17.57 km) light rail extension, referred to locally as the Mid-Coast Trolley, will serve major activity centers such as Old Town, Mission Bay Park, the Department of Veteran’s Affairs Medical Center, UC San Diego and the Westfield UTC shopping center. Officials estimate the
project will serve 24,600 transit trips every weekday, with service anticipated to start in 2021. “FTA is proud to partner with San Diego to bring new transit options to this growing region,” said Flowers. “With the population along the Mid-Coast corridor expected to grow nearly 20 percent in the coming decades, this trolley extension will offer a much-needed alternative to traffic congestion in the years ahead.” With the signing of the federal grant agreement, FTA is committing a total of $1.04 billion through its Capital Investment Grant (CIG) Program to the $2.17 billion Mid-Coast Corridor Transit Project. In addition to the $100 million that will be awarded with the signing of the grant agreement today, the remaining federal funds will be provided over the course of 10 years on an annual payment schedule, subject to Congressional approval during the annual appropriations process. The CIG Program is the nation’s primary grant program for funding major transit capital investments. Projects accepted into the highly competitive program must go through a multi-year, multi-step process according to requirements in law in order to be eligible for and receive program funds. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • October 2, 2016 • Page 21
14635 Valley Blvd. Fontana, CA 92335
800-316-0327
www.scottequip.com
SOUTHERN CALIFORNIA’S ONE STOP SHOP
Full Service Dealership: New and used equipment sales
Field service capabilities
Experienced parts department
Fully equipped shop
Wide range of equipment rental machines
Page 22 • October 2, 2016 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide
A $2.1 billion 740,000 sq. ft. (68,748 sq m) acute-care hospital and a $168 million 253,000 sq. ft. (23,504 sq m) medical office building are being constructed at California Medical Center’s Van Ness and Geary campus in San Francisco.
Sub-phases include entitlements and design, mobilization and demolition, excavation and shoring, construction of the Van Ness tunnel walkway, structural systems, exterior skin system and interior finishes.
Hospital, Medical Office Building Coming to San Francisco HOSPITAL from page 15
Both medical buildings are LEED certified, which means they are resource efficient. In addition, California Pacific Medical Center engineers incorporate technology that that helps minimize impacts from a major earthquake. The contractor for the new hospital is HerreroBoldt, a partnership of Herrero Builders of San Francisco and The Boldt Company based in Appleton, Wis. HerreroBoldt was selected as the best value through the request for proposal process. Sutter Health of Sacramento is developer for the hospital. Dean Fryer, media relations manager at Sutter Health’s California Pacific Medical Center, described the new Van Ness and Geary campus as an ideal location. “The new Sutter Health-CPMC hospital campus is centrally located in San Francisco at the intersection of two major transportation arteries,” Fryer said. “This central location allows easy access for patients and provides us the ability to serve the highest percentage of families living in the city. The location also provides convenient access to our specialized medical care for patients across the wider Bay Area region.” Pankow Builders of Pasadena, Calif., is contractor of the medical office building. San Diego-based Pacific Medical Buildings is developer. More than 40 subcontractors are on the job. Top subcontractors include: SmithGroupJJR (architect) based in Detroit; California Drywall of San Jose, Calif.; GFE Norcal of Novato, Calif.; Harrison Drywall
of San Francisco; and Rosendin Electric of San Jose, Calif. The contractors use an integrated communications system to coordinate design and construction delivery. The system utilizes hightech software applications. Work is Moving Along Construction of the hospital began in 2014 following demolition of the existing buildings in October 2013. Structural steel installation for the hospital was completed in December 2015. Completion of the two structures is expected in 2019. The hospital will open to patients in the first quarter of 2019. The contractor reports that the hospital is on schedule and at budget. The medical office building will open for tenants in the second quarter of the same year. Construction of the hospital will require 12,000 tons (10,886 t) of structural steel and 43,000 cu. yds. (32,875 cu m) of concrete. The medical office building will be constructed with 21,000 cu. yds. (16,055 cu m) of concrete. The demolition of the prior buildings, a 10-story, 45,000 sq. ft. (4,181 sq m) hotel and an 11-story office building, was necessary to start the hospital and medical office building construction. Almost all the material from the demolition was recycled. Excavation of the site generated more than 100,000 cu. yds. (76,455 cu m) of soil that was mostly sand. Crews removed about 10,000 truckloads of soil from the site over a four month period. About 350 skilled union trade
Crews pour the concrete floor of the Van Ness and Geary Campus hospital.
works are on site daily for the hospital construction. The medical office building project has about 15 skilled union trade works on site. Two tower cranes are on site for the hospital construction. Two mobile cranes are in use for shoring at the medical office building site. One tower crane will be used for the medical office building construction. A conveyer and hopper are being used for excavation and haul off. Single-Phased Project The hospital was designed and will be built as a single-phased project. However it will include milestone sub-phases. Sub-phases include entitlements and design, mobilization and demolition, excavation and shoring, construction of the Van Ness tunnel walkway, structural systems,
exterior skin system and interior finishes. The medical office building also will be constructed in a single phase with milestone sub-phases. SmithGroupJJR, based in Detroit designed the acute care hospital and Boulder Associates, based in Boulder, Colo., designed the medical office building. The buildings incorporate a filtered outdoor air system, healthy building materials and water conservation. Busy Part of San Francisco The Van Ness and Geary campus is located at one of the busiest intersections in San Francisco. Challenges of constructing the campus include working in a busy urban environment with heavy vehicle traffic, public transportation and pedestrian activity. The hospital covers an entire
city block and has secured temporary lane closures on all sides. Sidewalks are closed on three sides during construction. The general contractor constantly monitors the site and surrounding area for noise, dust and vibration. To mitigate the disruption to the neighbors, construction hours are limited to a period from 7 a.m. to 7 p.m. The construction teams also communicate with neighbors regarding upcoming construction activities via a weekly construction update posted on the project Web site. Information is provided through email communications, quarterly community meetings and a construction hotline. Hospital Designed for Earthquake Safety The hospital is designed to be operational after a large earthquake so it can serve the public when the need for health care services is the greatest. The structural system includes the first U.S. application of earthquake technology that was perfected in Japan. It features viscous wall dampers that reduce seismic accelerations during an earthquake. That in turn reduces overall stress on the building superstructure and infrastructure. Viscous wall dampers replace other seismic isolators such as base isolation bearings and rubber isolators. For more information, visit www.cpmc2020.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG
Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • October 2, 2016 • Page 23
562.273.7013
www.coastlinecd.com
Headquartered: Sacramento, CA cranesales@coastlineequipment.com “Your Crane and Boom Truck Headquarters”
SALES | RENTALS | PARTS & SERVICE 2014 MANITEX 1770C Stk #: 37086 - $155,000
Rental Purchase & Leasing Options Available - Call for Details
2016 MANITEX 22101S Stk #: 64603 - Priced To Sell! Make An Offer!
2013 MANITEX 30100C Stk #: 38056 - 1300 Hrs, 8600 Mi - $195,000
2013 MANITEX 2250T Stk #: 37103 - 4540 Hrs, 100,705 Mi - $145,000
2009 TADANO GR300XL-1 Stk #: 1678 2600 Hrs - $140,000
2012 TADANO GR550XL-2 Stk #: 35948 - 1355 Hrs $285,000
2012 MANITEX 26101C Stk #: 35104 - 4675 Hrs 88,950 Mi - $145,000
2012 MANITEX 35124C Stk #: 35112 - 1800 Hrs, 18,000 Mi - $240,000
2012 TADANO GR350XL-2 Stk #: 35840 - 495 Hrs $225,000
2016 MANITEX 40124SHL Stk #: 65025 Priced To Sell! Make An Offer!
Voters Will Decide on Prop 51 in November VOTERS from page 15
tional education facilities; and $2 billion for California Community Colleges facilities. • Bars amendment to existing authority to levy developer fees to fund school facilities, until new construction bond proceeds are spent or Dec. 31, 2020, whichever is earlier. • Bars amendment to existing State Allocation Board process for allocating school construction funding, as to these bonds. • Appropriates money from the General Fund to pay off bonds. The shorter ballot label summary is as follows: Authorizes $9 billion in general obligation bonds for new construction and modernization of K-12 public school facilities; charter schools and vocational education facilities; and California Community Colleges facilities. The long-form, official ballot summary for Proposition 51 was identical to the initial summary provided to initiative proponents for the purpose of circulating the initiative for signature collection. Fiscal Impact Statement The fiscal impact statement for a California ballot initiative authorized for circulation is jointly prepared by the state’s legislative analyst and its director of finance. It is estimated that it will cost the state about $17.6 billion to pay off both the principal ($9 billion) and interest ($8.6 billion) on the bonds. These payments of about $500 million per year will last for 35 years. For more information, visit https://oag.ca.gov/. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
REXIN EQUIPMENT 2641 East Artesia Boulevard • Long Beach, CA 90805 562-531-4600 Or Call Joe Rexin 714-299-2273 www.rexinequip.com
Page 24 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AEM Elects David Koppenhofer, Scott Harris to Fill Unexpired Terms on Boards The Association of Equipment Manufacturers (AEM) has elected David Koppenhofer, executive director OEM Sales & Support, Cummins Inc., to the AEM board of directors, and has elected Scott Harris, vice president Case Construction North America, CNH Industrial, to the AEM CE sector board, to fill unexpired terms. AEM is the North American-based international trade group representing off-road equipment manufacturers and suppliers. AEM officers and directors work on behalf of all member companies, giving their time and talent to provide strategic direction and guidance for association action in areas including public policy, market data, and exhibitions, as well as technical, safety and regulatory issues, global business development, and education/training. “At AEM, we benefit from the support of our member companies and the dedication of their representatives who
A-Z Equipment Rentals & Sales www.a-zequipment.com East Valley/Gilbert 1313 E. Baseline Rd. Gilbert, AZ 85233 480-539-8700 North Phoenix 602-992-1150 West Valley 623-925-0200 Central Phoenix 602-955-5100
David Koppenhofer
Scott Harris
serve in AEM leadership roles,” said AEM President Dennis Slater. “They help ensure Association programs continue to meet member and industry needs, and we appreciate David and Scott’s knowledge and participation.” AEM membership comprises more than 900 companies and more than 200 product lines, and the Association is
headquartered in Milwaukee, Wis., with offices in the world capitals of Washington, D.C.; Ottawa, Canada; and Beijing, China. For more information, visit www.aem.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Plan to Lure Raiders to Vegas Passes STADIUM from page 1
to win over the governor, the Legislature and three-quarters of NFL owners to make the project a reality, but it’s a significant milestone for a city that’s never had a professional football team and has been hammering out the particulars of the Raiders deal for months. “We get an NFL team, and that is a significant step forward for Las Vegas and the community,” committee chairman Steve Hill said about the project’s potential. “Those teams bring the community together. We’re going to have people wearing Raiders jerseys and high-fiving each other. That’s not something you can put a number on.” The Adelson family plans to put $650 million toward the stadium, which would also be home to UNLV football, while the Raiders plan to kick in $500 million. Officials with the Las Vegas Sands, Adelson’s company, said they don’t want to return any profits to the public because they’d be making little or no money on the stadium. They’re also committing to fund construction cost overruns and infrastructure improvements at the yet-undetermined site. Sands representative Andy Abboud said the Adelsons were in China to open a $2.9 billion Parisian Macao casino and probably asleep when the vote came, but he texted them the news and said they’ll be excited. “I never dreamed of or hoped for a unanimous vote,” Abboud said. “But a unanimous vote, I think, sends a very strong signal to the Legislature.” Opponents question whether it’s appropriate to put public dollars toward a project spearheaded by one of the richest men in the world. They’re also wary of the bonds used to finance the project, which could put taxpayers on the hook to cover stadium debt in a downturn. Hill said the deal’s structure would shield taxpayers even in a recession as deep as the most recent one, when hotel tax revenues fell 33 percent. He also addressed arguments that tax hikes should prioritize Nevada’s bottom-ranking public
school system. “I’m not going to argue that a room tax couldn’t be used for other things,” Hill said, noting that the increase will mostly affect tourists, not locals. “I will say this is an entirely, very appropriate use for room tax.” Stadium proponents drove a hard bargain with the committee, which included casino leaders and elected officials. The Las Vegas Sands said they’d walk away from negotiations if the public put in less than $750 million, and the company fought to protect themselves from any future taxes targeting the team. Public pressure mounted, too. Union members wearing Raiders gear held tailgate parties outside the committee’s meetings, and cheerleaders in silver and black flanked the entrances to the meeting. Electronic billboards along the interstate urged people to “hold politicians accountable” on the stadium deal and recommended the hashtag “Don’t Screw This Up NV.” It was unclear when Republican Gov. Brian Sandoval might call lawmakers into special session to consider the deal, although proponents want it as soon as possible so they can pitch the deal to NFL owners ahead of their January meeting and potential team relocation vote. “I will not move forward until all questions have been resolved,” he said. “I am hopeful the work completed by this committee will serve as a roadmap to Southern Nevada’s unrivaled and continued success.” Oakland Mayor Libby Schaaf, meanwhile, said her city “is neither rolling over, nor giving up” and continues work on a deal with the team. “Now is the time for everyone in our region to pull together to show the NFL and the Raiders that their future is in Oakland,” she said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Barnsco, Inc. 2609 Willowbrook Rd. P.O. Box 541087 Dallas, TX 75220 214-352-9091 Hutto, TX 512-354-4970 Fort Worth, TX 817-740-2400 Walled Lake, MI 248-668-1010 www.barnsco.com
ALLWEST UNDERGROUND RENTALS - SALES - SERVICE 799 Valentine Ave SE • Pacific, WA 98047 800-828-8505 • 253-987-7555 Fax: 253-987-7556 4020 NE Buffalo St. Portland, OR 97211 506-546-8875 Fax: 503-445-2020 8419 219th St. SE Woodinville, WA 98702 425-398-2353 Fax: 425-398-9354 www.allwestunderground.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 25
Orion Equipment 18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com
Tejas Equipment 6380 Randolph Blvd. San Antonio, TX 78233 210-590-2445 Fax: 210-590-1432 McAllen, TX 956-682-1312 www.tejasequipment.com
Brownco Manufacturing & Sales 1525 N. 105th E. Ave. Tulsa, OK 74116 918-794-2855 Fax: 918-794-2854 www.browncomfg.com
APCO Equipment Corp. 3432 N. 5th Street North Las Vegas, NV 89032 702-871-7474 Fax: 702-368-0871 www.apcoequipment.com
Page 26 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
A SHINING EXAMPLE OF CUSTOMER INPUT. Our new 324E Skid Steer packs customer-inspired features and performance into an agile, XOWUD HI ƟFLHQW FRPSDFW GHVLJQ It features exceptional reach at truck beds, connect-underpressure auxiliar y couplers, and your choice of controls including our exclusive switchable electrohydraulic (EH) option that lets you select among dif ferent control patterns, at any time, at the push of a button. TTo o learn more, see your dealer or visit our website.
Irving, TX 972/438-4699 Fort Worth, TX 817/232-8094 Hewitt, TX 254/666-3900 Pflugerville, TX 512/272-4141 New Braunfels, TX 830/632-3100
RDO EQUIPMENT CO.
HONNEN EQUIPMENT CO.
www.rdoequipment.com
www.honnen.com
Laredo, TX 956/718-1909 Chandler, AZ 602/845-1800 Flagstaff, AZ 928/526-0639 Phoenix, AZ 602/415-4700 Prescott, AZ 928/776-8300
Tucson, AZ 520/294-5262 Lakeside, CA 619/443-3758 Riverside, CA 951/778-3700 Indio, CA 760/342-8900 Imperial, CA 760/355-4331
5055 East 72nd Ave. Commerce City, CO 80022 303/287-7506 Fax: 303/288-2215 Durango, CO 970/247-4460 Grand Junction, CO 970/243-7090
Ogden, UT 801/627-0049 Salt Lake City, UT 801/262-7441 St. George, UT 435/652-8003 Casper, WY 307/266-4474
Gillette, WY 307/685-4288 Rock Springs, WY 307/382-5284 Idaho Falls, ID 208/523-9915
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 27
CASE AUTHORIZED DEALERS
LOW TCO AND HIGH ROI ROLLED INTO ONE IMPRESSIVE MACHINE.
Alaska
Oklahoma
YUKON EQUIPMENT Anchorage (907) 277-1541 Fairbanks (907) 457-1541 Wasilla (907) 376-1541
OCT EQUIPMENT Clinton (580) 323-3422 Oklahoma City (405) 789-6812 Tulsa (918) 437-5085
Arizona
Oregon
BINGHAM EQUIPMENT Casa Grande (520) 836-8700 Parker (928) 669-9271 Yuma (928) 726-4701
CENTRAL MACHINERY Hermiston (541) 567-2331
TITAN MACHINERY Phoenix (602) 269-3221 Tucson (520) 623-5848
California DIAMOND A EQUIPMENT Oxnard (805) 485-2103 Santa Maria (805) 621-7830 SEQUOIA EQUIPMENT COMPANY Bakersfield (661) 679-1475 Fresno (559) 441-1122 SONSRAY MACHINERY El Cajon (619) 873-0123 Fontana (909) 355-1075 Redding (530) 245-9000 Sacramento (916) 649-0096 San Leandro (510) 562-0653 Santa Fe Springs (562) 903-7377 Stockton (209) 464-9600
Colorado CENTURY EQUIPMENT Clifton (970) 434-7363 Durango (970) 247-0522 TITAN MACHINERY Colorado Springs (719) 596-2924 Henderson (303) 286-7000 Windsor (970) 461-4960
Texas ASCO Abilene Amarillo Beaumont Belton Brenham Bryan Euless Houston Houston Lubbock Manor San Angelo San Antonio Sherman Terrell Tyler Wichita Falls
(325) 698-2726 (806) 553-7777 (409) 212-8100 (254) 613-1500 (979) 836-6641 (979) 779-8942 (817) 283-2844 (713) 649-0940 (281) 987-1990 (806) 745-2000 (512) 272-8922 (325) 655-5666 (210) 333-8000 (903) 893-7586 (972) 563-2171 (903) 593-0201 (940) 687-2726
NUECES POWER Corpus Christi (361) 289-0066 Laredo (956) 725-0066 San Benito (956) 361-0066 Victoria (361) 576-0066 Vinton (915) 541-0066 PERMIAN TRACTOR Odessa (432) 367-8628
Idaho
Utah
BURKS TRACTOR Caldwell (208) 466-7875 Twin Falls (208) 733-5543
CENTURY EQUIPMENT Cedar City (435) 586-4406 Logan (435) 752-1533 Salt Lake City (801) 262-5761 Springville (801) 794-1463
PIONEER EQUIPMENT American Falls (208) 226-5209 Blackfoot (208) 785-0008 Idaho Falls (208) 523-5455 Rexburg (208) 359-8000
Montana Based on actual sales data from the past five years, EquipmentWatch has awarded the CASE 580 Series backhoes the first-ever Highest Retained Value Award. That’s high praise for the quality, performance and longevity of an iconic line that also delivers best breakout force, highest lifting capacity, fastest roading speeds and one of the industry’s quietest cabs. So dig deeper, reach further, load faster—and get more at resale with CASE.
SONSRAY MACHINERY Portland (503) 283-2461 Salem (503) 362-1371
TITAN MACHINERY Billings (406) 259-5500 Great Falls (406) 453-1405 Missoula (406) 543-7782
Washington CENTRAL MACHINERY Moses Lake (509) 765-1257 Pasco (509) 547-9003 Sunnyside (509) 837-3833 SONSRAY MACHINERY Auburn (253) 735-2702 Marysville (360) 651-2171
Nevada
Wyoming
SONSRAY MACHINERY N Las Vegas (702) 649-0077 Sparks (775) 358-5000
CENTURY EQUIPMENT Rock Springs (307) 382-6570
New Mexico
TITAN MACHINERY Gillette (307) 682-9742
TITAN MACHINERY Albuquerque (505) 342-2566
LIMITED TIME ONLY!
3-YR/3000-HR PROTECTION PLAN* WHEN YOU PURCHASE ANY CASE N SERIES BACKHOE LOADER
*CASE Premier Protection Plan limited to 3 years or 3,000 total engine hours, with total coverage including manufacturer’s base warranty of 12 months. Premier coverage with a $0 deductible applies in months 13 through 36 or 3,000 total engine hours, whichever occurs first. Eligible equipment includes all new CASE Backhoe Loaders (580N EP, 580N, 580SN, 580SN WT, 590SN). This literature is descriptive only. The precise protection afforded is subject to the terms, conditions and exclusions of the contract as issued. Program participation is subject to underwriting requirements. Programs may be changed or canceled without notice. All insurance products offered through CNH Industrial Insurance Agency Inc. are underwritten by licensed insurance companies. Capitalized terms used in this literature, unless defined herein, have the meanings assigned to them in the contract as issued. ©2016 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Insurance Agency Inc. is an AmTrust Financial company. The CNH Industrial Insurance logo and “CNH Industrial” name are licensed or sublicensed by CNH Industrial N.V. to AmTrust North America, Inc. for use in its insurance agency business. Any trademarks referred to herein, in association with goods and/or services of companies, other than owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates, are the property of those respective companies.
Page 28 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Mexico...
Washington-Grizzly Champions Center Construction on Will Feature State-of-the-Art Amenities Spaceport Road Could Start in 2017
By Lori Tobias
CEG CORRESPONDENT
Next year at this time, athletes at the University of Montana should have plenty to celebrate — the completion of the new $14 million WashingtonGrizzly Champions Center. It’s a 46,000-sq.-ft. (4,273.5 sq m) project offering new locker rooms for the football team, a state-of-the-art strength and conditioning center to be used by all athletes and expansive meeting spaces. And it comes not a moment too soon. “Originally in 1983, we started construction on the present stadium in its location,” said Kevin Krebsbach, UM director of facilities. “As part of that construction we had locker rooms and showers under the stadium. Waterproofing was quite the task. We didn’t ever quite get it right. There was no daylight. It was the worst conditions, a walking plaza and roof overhead, so you can imagine the task of keeping snow from leaking down beneath. It was a challenge for all the recruiting we were doing.” The university did manage to put in membrane roofing that kept the water out, but it was still less than ideal. University boosters urged the school to move forward with a replacement and with a donation of $7 million from the Washington family, the university was finally able to get serious about a replacement. But it wasn’t without numerous challenges. “The site they selected was one of the challenges,” said Krebsbach. “It’s adjacent to the stadium and includes a recreation center and swimming pool. We wanted the players to be able to run from the facility to the field. We wanted close proximity. All the women’s sports and Olympic sports, everyone uses that area. We wanted to have it so they didn’t have to go outside. When they get all sweaty and want to walk outside and it is 15 degrees, it is a challenge. But also we wanted them to be able to access all the other facilities.” The most obvious location was a parking lot. It was optimal for the center, but it was a tough choice since it was also the site of all the utilities. “Every utility ran through that site,” he said. “Virtually all the utilities — steam, storm sewer, water, power.” Last year, crews went to work relo-
The new $14 million Washington-Grizzly Champions Center will offer new locker rooms for the football team and a state-of-the-art strength and conditioning center to be used by all athletes.
cating those utilities. “One of the main sources of power to campus ran right through where the building was going to go,” Krebsbach said. “It was vintage 1982 and we were getting a little worried about conductors. So we took the opportunity to relocate the campus feed, our main electrical feed to campus, which was previously under the old stadium, which wasn’t a good thing. We wanted to relocate that supply. We did that before we got started on construction this year.” There also were some issues with the design. The center must meet LEED silver standards, which impose certain restrictions from the start. Originally, the plan was to work with precast concrete for structural members. But they soon realized they would not be able to fit the large crane necessary to set the concrete in the tight space between the facilities. Instead, they opted for a steel foundation with insulated precast concrete for the walls. “Because of the crane swing, we wouldn’t be able to get enough structural members in place. We would have had to build in place as you went up each level. It’s not really efficient. The subcontractors would have had to come back multiple times. The locker room has to be durable so that is why we were looking at precast concrete or concrete masonry units for the durability. You can imagine 100 football players walking down the halls. We still need a crane for the steel, but not the big one that would have been necessary for the concrete structural members.”
There also is the issue of building the center while keeping the stadium open and fully accessible. “The center is shoehorned between the pool, event center and the stadium. The Champions Center runs along the concourse of the stadium and we have to leave that concourse in. It has to stay open for access to seating, etc. So engineers came up with a unique shoring.” They also must work around other crews installing a new video board, and new turf, making it critical that all the contractors work closely. To meet LEED requirements, all asphalt and concrete busted up from the old parking lot will be trucked to local partners who will recycle and reuse the material. Trees from the lot were removed and chipped for mulch to be used on campus. CTA Architects designed the center and the construction contract was awarded to Jackson Contractors Group, both Missoula-based firms. It will feature an abundance of glass and a manufactured-stone veneer, some of which was donated by a local booster. “We’re proud it,” said Krebsbach. “Everyone gets behind Grizzly football. There’s a lot of excitement. It just energizes all the contractors knowing what they are building.” As for the old facility, it will remain in place for visiting teams and some of the other needs that couldn’t fit into the new structure. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
LAS CRUCES, N.M. (AP) Planned construction of a southern New Mexico road to Spaceport America is one step closer to taking place. The Las Cruces Sun-News reports that the New Mexico Spaceport Authority gave approval to sign off on a required agreement with the Bureau of Land Management. The land agency and Spaceport Authority board of directors must come to terms on a Memorandum of Agreement in order for right-of-way access for construction to be given. According to a proposal shown to the Spaceport Authority, BLM officials may sign off in October. Construction on 24 mi. (38.6 km) of dirt road that goes from the Upham exit off Interstate 25 could start in April. Supporters of the taxpayer-funded Spaceport say a paved route is crucial for county residents and businesses to benefit economically. For more information, visit http://www.lcsun-news.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION Required by 19 USC 3685 Title of publication: CONSTRUCTION EQUIPMENT GUIDE WESTERN EDITION; Publication Number: 2330-9792; Date of filing: Sept. 21, 2016; Frequency: Bi-weekly, 26 issues annually; Annual Subscription price: $65.00; Complete mailing address of known office of publication: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s general business office: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s name and address: Edwin M. McKeon, Jr. 470 Maryland Dr., Ft. Washington, PA 19034; Editor in Chief: Craig Mongeau, 470 Maryland Dr., Ft. Washington, PA 19034; Owner: CONSTRUCTION EQUIPMENT GUIDE WESTERN EDITION, 470 Maryland Dr., Ft. Washington, PA 19034; Edwin M. McKeon Jr., 470 Maryland Dr., Ft. Washington, PA 19034; Joseph McKeon, 5875 N. Lincoln Ave. Suite 227, Chicago, IL 60659; Richard McKeon, 6060 Piedmont Row Dr. South Ste 555, Charlotte N.C. 28210; Known bondholders, mortgages, and other security holders: None, Issue date for circulation data below 09/18/16; Extent of circulation (Average number of copies during preceding 12 months): Net press run 19,856; paid circulation through agents 0; through mail subscription 19,504; free distribution 0; total distribution 19,504; copies not distributed 352; return from news agents 0; Total 19,856; Percent Paid and/or Requested Circulation 100%; Actual number of copies for issue published nearest to filing date: Net press run 20,272; paid circulation through agents 0; through mail subscription 20,014; free distribution 0; total distribution, 20,014; copies not distributed 258; return from news agents, 0; Total, 20,272; Percent Paid and/or Requested Circulation 100%. I certify that the above statements made by me are correct and complete. /s/ Edwin M. McKeon, Jr., President/CEO
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 29
RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com
Vermeer Texas-Louisiana
Ditch Witch of Oklahoma/Tulsa Edmond, OK 73034 405-348-4633 Tulsa, OK 74116 918-438-1560
© 2014 Yanmar Yanmar America Corp.
www.vermeertexas.com Alamo, TX 956-782-5580
Waco (Ross), TX 254-829-9655
Lubbock, TX 806-745-1245
Amarillo, TX 806-622-2407
Irving, TX 972-255-3500
Midland, TX 432-685-9276
Corpus Christi, TX 361-887-8499
Houston (Cypress), TX 281-671-6000
Round Rock, TX 512-244-0505
Denham Springs, LA 225-665-7900
Kilgore, TX 903-988-9868
San Antonio, TX 210-337-7700
Page 30 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 31
HYUNDAI HX SERIES EXCAVATORS
More Standard Features s s s s s s
Faster cycle times, greater productivity Standard rear camera; All-Around View Monitoring option Spacious, quiet cab with Bluetooth and wireless Standard air-suspension seat 3-year Hi-Mate remote management system 3-year, full-machine warranty, plus 5-year / 10,000-hour structural guarantee
To learn more about the HX series excavators, call your Hyundai dealer today. CISCO FORD EQUIPMENT www.cisco-eq.com Artesia, NM Lubbock, TX 575-748-1314 806-745-9595 520 SE Loop 338 San Angelo, TX Odessa, TX 79762 325-653-2121 432-550-9181 Fax: 432-367-9335
HEAVY EQUIPMENT SALES Corona, CA 951-674-9999 Pacoima, CA 818-834-0102
JET CITY EQUIPMENT Oak Harbor, WA 360-675-4441 North Seattle, WA 360-651-9079 Wenatchee, WA 509-888-8181
MECOM EQUIPMENT www.mecomequipment.com Stockton, CA 209-466-5135
©2016 Hyundai Construction Equipment Americas, Inc. All Rights Reserved.
Page 32 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Crews Make Needed Improvements to Peralta Roadway IMPROVEMENTS from page 1
gutter with sidewalks and a drainage system along the corridor. Work is expected to be complete by fall 2016. A mix of federal and state funds is being used. Small Town, Big Traffic Despite the town of Peralta’s rural setting and a population of 3,743, NM 47 had average weekday traffic flows of 25,000 to 30,000 in 2014, according to the most recent data posted by Mid Region Council of Governments, which is the source of the DOT’s traffic flow maps. The reason for the heavy volume, Bell speculated, is due in part to the proximity of neighboring communities like Bosque Farms, Los Lunas, Belen and Valencia. “As the rural setting of these The 1.8-mi. (2.9 km) stretch of highway offered motorists two lanes in each directowns began to grow and busition, but the new configuration will be expanded to include two northbound and two nesses came into the area, the southbound lanes corridor became more populated diligently to dial in the pervious concrete Because the pervious concrete is new to and there was an increased need mix, placement operations and testing proce- them, crews find it a challenge. Another for safer entries into the businessdures, going above and beyond the contract challenge is the amount of ground water that es and homes that populated the must be pumped from the site. by placing numerous test strips.” corridor,” said Bell. “Many resiPermits were acquired to comply with the Eight inches of pervious concrete will be dents of these rural communities in the 5-ft. (1.5 m) bike lane between driving Clean Water Act and include the preparation located in Valencia County use lanes and curb and gutter adjacent to the of a Stormwater Pollution Prevention Plan. this corridor to commute the 20sidewalk. Buried 4 to 5 ft. (1.2 to 1.5 m) Crews must take measures to minimize soil mile drive to Albuquerque, locatbeneath this area is an aggregate box with a erosion and sediment transport, including ed to the north.” Safety along the corridor was In order to meet the tight timeline, crews averag- 10 mil PVC liner and filter fabric for mitigation measures to protect water quality. At irrigation ditches, construction activities a major factor for the reconstruc- ing 70-90 per day will begin working around the drainage. clock seven days a week until completion. In addition to the pervious concrete, mate- occur during the no-flow periods when the tion, she noted. The project also coincided with the town tractors; a Bomag recycling machine; a rials needed to complete the project include ditch system is dry. Other environmental issues include comof Peralta’s need to put in a gas line through milling machine; a laydown machine; steel concrete paving, miscellaneous concrete, the corridor. NMDOT, AUI Inc. and the wheel rollers; pneumatic rollers; a scraper; a borrow, base course, asphalt hot mix paving, pliance with the Migratory Bird Act. Crews Town of Peralta coordinated the construction water truck; a directional drilling machine GeoGrid earth reinforcement and reinforced are required to re-seed areas with weed-free native plants and grasses. so that the initial stages of the work were ;and both truck- and track-mounted drill rigs concrete pipe. The Our Lady of Guadalupe Church and to complete this project. designated for the gas line. Challenging Environment Old Peralta School relisted properties near Specialty equipment includes a pervious In order to meet the tight timeline, crews which low-vibratory equipment and vibraconcrete pan float and roller. Work Detail “Pervious concrete is not only new to this averaging 70-90 per day will begin working tion monitoring must be used for construcAUI Inc., along with subcontractors Guzman Construction and MWI Inc., will project, but new to the state of New around the clock seven days a week until tion activities. use six loaders; four blades; three landscape Mexico,” Bell said. “The prime is working completion. see IMPROVEMENTS page 68
Permits were acquired to comply with the Clean Water Act and include the preparation of a Stormwater Pollution Prevention Plan.
During the design phase, the design team held two public information meetings as well as three property owner workshops.
Safety along the corridor was a major factor for the reconstruction.
Paving
SECTION
Pages 33-41
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
Cedarapids Paver Advances Durability, Improves Comfort The rubber track Cedarapids CR662RM RoadMix from BOMAG features a new 260 hp (191 kW) Tier IV Final Cummins diesel engine that delivers the power needed for high production applications. Boasting a low, 21psi fully loaded ground contact pressure, the CR662RM can be used on all paving lifts, including the critical base layer, to virtually eliminate all forms of material and thermal segregation. Unlike MTVs with empty wheel loads in excess of 75 psi, the low-psi rubber track RoadMix machine does not cause rutting on the base layer, can cross bridges fully loaded and is transported to the job site like a 10-ft. (3 m) paver, so contractors can finish mainline and airport paving applications quickly, efficiently and with high mat quality, according to the manufacturer. Replacing the traditional in-hopper slat delivery system, the improved Remix anti-segregation system delivery augers now feature hard-faced back sides to significantly increase wear life. The two sets of two variable-pitch, counter-rotating augers uniformly draw down material from inside the hopper to aggressively remix 100 percent of the asphalt to combat segregation at the job site. Auger pitch spacing transitions from 10 in. (25.4 cm) at the front of the hopper to 12 in. (30.5 cm) at the rear to quickly channel material to the transfer conveyor or screed. This design results in throughput capacities in excess of 600 tph (500 t) whether equipped as a paver or MTV. A new platform design increases the operator’s line of sight to the RoadMix’s sides, enhancing comfort and productivity. The operator’s seat now pivots beyond the machine’s side for unimpeded track visibility, while the revamped
Boasting a low, 21-psi fully loaded ground contact pressure, the CR662RM can be used on all paving lifts, including the critical base layer, to virtually eliminate all forms of material and thermal segregation.
operator’s console also pivots to line up with the seat. A sloped engine hood improves the operator’s sightline to the hopper. The generator powering the electric screed is now positioned away from the screed, lowering sound levels to the screed operator’s ears to further improve comfort. Whereas most MTVs sit idly by more than 75 percent of the time, the unique CR662RM RoadMix design substantially improves a contractor’s return on investment. In less than 4 hours, crew members can quickly remove the rear conveyor assembly used for transferring material from the tractor and replace it with the screed assembly, according to the manufacturer.
“If necessary, a contractor could pave with the RoadMix in the morning and use it as an MTV in the afternoon,” said Henry Polk, product marketing manager — paving products of BOMAG. “This is one machine that will rarely sit in a contractor’s yard.” The Cedarapids CR662RM RoadMix now comes standard with 3 years of complementary BOMAG Telematic service. BOMAG Telematic monitors machine vitals, delivers text and email alerts to key personnel, reminds the dealer and service technicians when scheduled maintenance tasks are due, and offers a number of productivity reports to help maximize machine utilization.
“Even at full load,” added Polk, “Telematic is showing us that the CR662RM uses only an average of 5 gal [19 L] per hour.” Smartrac technology extends the CR662RM RoadMix’s track life, warranted for 3 years/3,000 hours. Oscillating bogie wheel assemblies combine with the system’s frictionally driven rubber tracks to automatically apply the correct tension to the track, regardless of traveling in forward or reverse. The self-tensioning system does not over tension the track, significantly prolonging track life, according to the manufacturer. When equipped as an MTV, the CR662RM’s 30-in. (76.2 cm) wide conveyor offers a discharge height
of 73.2 to 115.8 in. (186 to 295 cm) for non-contact paving and swivels 55° left or right of center for off-set paving. For mainline paving, the CR662RM can be equipped with either the Stretch 20 or Fastach 10 screed and is capable of paving at widths reaching up to 30 ft. (9.1 m). Two independently controlled, variable-speed outboard drive motors eliminate the need for the spread auger center gearbox drive to reduce the occurrence of centerline segregation. For more information, visit www.bomag.com/us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 34 • October 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Shuttle Buggy...
866-430-7539
www.jfwequipment.com sales@jfwequipment.com
Serving the Asphalt Industry for 25 Years
Roadtec’s SB-2500e MTV Ensures Continuous Paving
2003 Etnyre Shooter distributor, 1500 gallons, computerized, 12 ft spray bar, dsl heat, IH 4300 w/DT466 dsl eng, auto trans, low miles
2003 Blaw Knox PF 5510 track paver, Ultimat 10-20 ft electric heated screed, Cummins dsl eng, power crown, slope & height, power auger tunnels
2003 Ferguson 5-8B static double drum roller, 50” drums, J.D. diesel engine, water system
2008 Bomag BW11RH pneumatic roller, 9 wheels, Cummins 3.3L diesel engine, water system
1998 Etnyre S-2000 distributor, 2000 gallons, computer w/1 ft cut-offs, propane heat, 12 ft spray bar, Ford F800 w/Cummins dsl eng, 5 spd trans, 2 spd axle
2002 Blaw Knox PF 3200 paver, Ultimat 10-20 ft electric heated screed, power crown, slope & height, front wheel assist, Cummins dsl eng
2005 Broce CR350 broom, a/c, 8 ft broom, Cat diesel engine, water system
2005 Ingersoll Rand DD112HF double drum 78” high frequency vibratory roller, Cummins diesel engine, water system
2008 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, Cat dsl eng, power crown, slope & height, front wheel assist, auger sensors (2010 yr also available)
3517 Wayne White Rd., Climax, NC 27233
The triple-pitch auger flighting design used in the Roadtec shuttle buggy is designed to provide uniform remixing across the width of the entire hopper.
The Roadtec SB-2500e shuttle buggy MTV (material transfer vehicle) can store and transfer hot-mixed asphalt material from a truck to a paver for continuous paving. Designed to “shuttle” between the asphalt haul truck and paver, the machine features an anti-segregation triple-pitch auger that remixes materials just before they are delivered to the asphalt paver at rates of up to 600 tons (544 t) per hour. The 25-ton (22.6 t) surge capacity of the SB-2500e/ex is sufficient capacity to allow trucks to fully unload material and immediately return to the asphalt plant, according to the manufacturer.. The triple-pitch auger flighting design used in the Roadtec shuttle buggy is designed to provide uniform remixing across the width of the entire hopper. The triplepitch auger located in the bottom of the hopper remixes the contents of the storage hopper. The mixing action is designed to equalize temperatures and evenly mixes large and small particles. A slat conveyor runs from the bottom of the hopper and feeds the discharge conveyor. The machine’s front hopper features a steep slope and vibrating bottom plate in the hopper, which is designed to prevent material build-up. Heavy-duty, swiveling support casters under the hopper are said to assure smooth movement. Operators can adjust the hopper position from either of two separate
The triple-pitch auger flighting design used in the Roadtec shuttle buggy is designed to provide uniform remixing across the width of the entire hopper. control boxes. They also can adjust the position of the push roller for different truck designs. An optional windrow pickup head is available. The SB-2500e is powered by a 300 hp Tier IV, diesel Cummins QSL 9 engine. The shuttle buggy MTV rides on four 21-in. wide by 25-in. high flotation tires. The steering wheel controls the front wheels of the allwheel drive machines. The hydrostatic drive mechanism offers two speed ranges (working and travel) with continuously variable speed. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 2, 2016 • Page 35
Page 36 • October 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Golden Equipment Company 721 Candelaria Rd NE Albuquerque, NM 87107 (505) 345-7811
1150 Madison Lane Farmington, NM 87401 (505) 326-1413
29268 Hwy 160 Durango, CO 81303 (970) 247-8830
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 2, 2016 • Page 37
Introducing 12 tons of stress relief
BOMAG introduces the new standard for affordable, user-friendly 12-ton soil compactors. The new BW211-40 series is loaded with ergonomic features to reduce operator fatigue. Plus it delivers over 53,000 lbs. of centrifugal force (nearly 62,000 lbs. for pad foot roller) over its massive 84-in working width. Other benefits include: •Redesigned, vibration-isolated operator’s platform with easy to use controls and improved sight lines •Shorter stop to stop steering input for less fatigue, 12-degree oscillation and 35-degree steering angle for optimum maneuverability •Easy open, no tool hood for better engine access •EPA-compliant Tier 3 diesel engines For detailed specs and full list of features and benefits on BOMAG 40-series rollers, visit
www.bomag-americas.com
THE COMPACTION EXPERTS
ASMUSSEN EQUIPMENT COMANY www.rasmussenequipment.com
www.power-equip.com 500 E. 62nd Ave. Denver, CO 80216 303-288-6801 Fax: 303-288-6809
2940 E. Las Vegas St. Colorado Springs, CO 80906 719-392-1155 Fax: 719-390-9604
100 Barr Ave. SE Albuquerque, NM 87105 505-344-9466 Fax: 505-345-4715
2329 River Road Grand Junction, CO 81505 970-243-0722 Fax: 970-243-0726
8806 E. US Hwy. 34 Johnstown, CO 80534 970-669-6209 Fax: 970-669-6280
3251 MJB Road Casper, WY 82601 307-577-9700 Fax: 307-577-9703
3333 W. 2100 S. Salt Lake City, UT 84119 801-972-5588 Fax: 801-972-2215
Page 38 • October 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
5300 A ASPHALT SPHAL AL LT PAVER P PA AVER THE INDUS INDUSTRY’S TRY’S NEWEST NEWEST COMPACT C COMP OMP PACT PAVER P PA AVER Handles the material load of a standard paver while maintaining the ability to fit into tight spaces Large L arge capacity material hopper gives this compact paver great agility and versatility utility,, patch, path, mill and fill work Designed for trench, utility Tier 4 Final diesel engine Ultra-efficient material management system reduces hand work and increases productivity Proven L Legend egend HD mini electric screed technology
LeeBoyy 5300 Asphalt p Paver 48 inch width for paving tighter trench areas
L LeeBoy eeBoy equipment manufactured in the US USA A
www.leeboy.com
BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511
KIRBY-SMITH MACHINERY, INC.
ROMCO EQUIPMENT CO.
www.kirby-smith.com Oklahoma City, OK 800/375-3339
www.romco.com
Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729
Austin 512/388-2529 877/851-1026
Dallas, TX 214/819-4100 800/227-6626
Buffalo 903/322-5602
Ft. Worth 817/626-2288 866/966-4602
Longview 903/758-5576 San Antonio 210/648-4600 800/966-4601
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 2, 2016 • Page 39
A WIRTGEN GROUP COMPANY
Brand New Highway Class Paver SUPER 2000-3i.
CLOSE TO OUR CUSTOMERS TECHNICAL HIGHLIGHTS > High-performance paver for use in highway construction and large-scale commercial applications
> Ergo Plus 3 for easy paver operation > Daily maintenance-free paver with large fuel tank for a day’s work or more
> Multiple screed options including front or rear extensions or a high-compaction screed for placing stiff mixes and base materials
www.wirtgen-group.com/america
WIRTGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · Telephone: 615-501-0600 KIRBY-SMITH MACHINERY INC. www.kirby-smith.com
6715 W. Reno Oklahoma City, OK 800-375-3339 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600
Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000
NUECES POWER EQUIPMENT www.nuecespower.com Corpus Christi, TX 361-289-0066 Edinburg, TX 956-702-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066 Houston, TX 713-247-0066
MODERN MACHINERY www.modernmachinery.com Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811
Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589
HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441
Ogden, UT 801-627-0049 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284
ROAD MACHINERY www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681 Bakersfield, CA 661-695-4830
Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 661-824-2319 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767
Redding, CA 530-229-3820 Sacramento, CA 916-375-3540 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601
Page 40 • October 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 2, 2016 • Page 41
RDO EQUIPMENT CO. www.rdoequipment.com Riverside, CA 800/494-4863
New Braunfels, TX 800/880-0880
Indio, CA 760/342-8900
Chandler, AZ 602/845-1800
Imperial, CA 800/464-4331
Ehrenberg, AZ 928/923-9611
Lakeside, CA 619/270-4300
Flagstaff, AZ 928/526-0639
Fort Worth, TX 800/551-4905
Phoenix, AZ 602/415-4700
Hewitt, TX 800/551-8258
Prescott, AZ 928/776-8300
Irving, TX 800/437-6342
Tucson, AZ 520/294-5262
Laredo, TX 956/718-1909
Wellton, AZ 928/785-4276
McKinney, TX 214/856-4899
Yuma, AZ 928/341-7100
Pflugerville, TX 512/272-4141
POWER MOTIVE CORP. www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 303/355-5900 Grand Junction, CO 970/241-1550 Colorado Springs, CO 719-576-5541
Milliken, CO 970/587-1188 Durango, CO 970/259-0455 Cheyenne, WY 307/634-5149
KOMATSU EQUIPMENT CO. 1486 S. Distribution Drive Salt Lake City, UT 84104 801/972-3660 Fax: 801/954-0936 4460 Pioneer Way Elko, NV 89801 775/753-7557 3825 Losee Road North Las Vegas, NV 89030 702/399-1004
900 Marietta Way Sparks, NV 89431 775/356-1334 1409 East 3850 South St. George, UT 84790 435/986-1000 405 Jonah Drive Rock Springs, WY 82901 307/686-1300
www.sakaiamerica.com (800) 323-0535
Page 42 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 43
Witch Equipment Co., Inc. Fort Worth, TX | 817-429-4824 Witch Equipment Co., Inc. Hewitt, TX | 254-666-3344 Ditch Witch of Oklahoma Edmond, OK | 405-348-4633 Ditch Witch of New Mexico, Inc. Albuquerque, NM | 505-345-1888 Ditch Witch of East Texas Tyler, TX | 903-592-6226 Ditch Witch of Tulsa Tulsa, OK | 918-438-1560
Ditch Witch Southwest Lubbock, TX | 806-745-6866 Odessa, TX | 432-617-8351 Ditch Witch of Arkansas Springdale, AR | 479-419-9771 Ditch Witch of Arkansas Benton, AR | 501-316-3200 Ditch Witch of Arizona Phoenix, AZ | 602-437-0351 Ditch Witch of Southern Arizona Tucson, AZ | 520-579-0261
Ditch Witch of Houston Houston, TX | 713-462-8866 Ditch Witch Northwest Portland, OR | 503-286-6400 Tukwila, WA | 206-995-8420 Billings, MT | 406-252-7667 Ditch Witch Equipment Co. West Sacramento, CA | 916-371-6000
Page 42 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 43
Witch Equipment Co., Inc. Fort Worth, TX | 817-429-4824 Witch Equipment Co., Inc. Hewitt, TX | 254-666-3344 Ditch Witch of Oklahoma Edmond, OK | 405-348-4633 Ditch Witch of New Mexico, Inc. Albuquerque, NM | 505-345-1888 Ditch Witch of East Texas Tyler, TX | 903-592-6226 Ditch Witch of Tulsa Tulsa, OK | 918-438-1560
Ditch Witch Southwest Lubbock, TX | 806-745-6866 Odessa, TX | 432-617-8351 Ditch Witch of Arkansas Springdale, AR | 479-419-9771 Ditch Witch of Arkansas Benton, AR | 501-316-3200 Ditch Witch of Arizona Phoenix, AZ | 602-437-0351 Ditch Witch of Southern Arizona Tucson, AZ | 520-579-0261
Ditch Witch of Houston Houston, TX | 713-462-8866 Ditch Witch Northwest Portland, OR | 503-286-6400 Tukwila, WA | 206-995-8420 Billings, MT | 406-252-7667 Ditch Witch Equipment Co. West Sacramento, CA | 916-371-6000
Page 44 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
IS IN OUR GENES. ROMCO EQUIPMENT CO. www.romco.com Austin, TX • (512) 388-2529 • (877) 851-1026 Buffalo, TX • (903) 322-5602 Carmine, TX • (979) 278-3570 Dallas, TX • (214) 819-4100 • (800) 227-6626 Ft. Worth, TX • (817) 626-2288 • (866) 966-4602 Houston, TX • (713) 937-3005 • (800) 865-6998 Longview, TX • (903) 758-5576 Rio Grande Valley, TX • (956) 565-0100 San Antonio, TX • (210) 648-4600 • (800) 966-4601 ROL Remote Oilfield Location Three Rivers, TX • (361) 254-2317
HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave., Commerce City, CO (303) 287-7506 • (800) 646-6636 Durango, CO • (970) 247-4460 Grand Junction, CO • (970) 243-7090 Ogden, UT • (801) 627-0049 Salt Lake City, UT • (801) 262-7441 Did you know over one-third of all hydraulic mining excavators working worldwide are Hitachi? They’re built to dig through the world’s harshest environments. That same toughness is passed down to our focused family of construction excavators. So whether you are pulling down a 60-foot-high wall of traprock or laying a mile of pipe, you get the same proven durability to get the job done. That’s the Power of Focus.
St. George, UT • (435) 652-8003 Casper, WY • (307) 266-4474 Gillette, WY • (307) 685-4288 Rock Springs, WY • (307) 382-5284 Idaho Falls, ID • (208) 523-9915
HitachiConstruction.com
Page 46 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
History of Artic Dump Trucks: Tractor to Heavy-Duty Hauler By Giles Lambertson CEG CORRESPONDENT
Artic dump trucks have a history that traces back to, of all things, a tandem ag tractor conceived in the 1950s in England by an Essex farmer. Early History Ernest Doe bought two Fordson tractors, removed the front axles from each tractor and connected the front end of one to the rear of the other using a hydraulic turntable. Voila! A tractor with doubled power. The cantilevered front engine rode on air and the
Introduced in 1960 as the Northfield F7, this truck hauled 12 tons (10.8 t) of material.
The Doosan DA30 is a workhorse.
pany bragging rights in 2016 whole tandem machine rode as the original manufacturer on four treaded rear tires powof an articulated dump truck. ered by the twin engines. It A DR860 still in use in was called a Doe Triple D California 48 years after its (Doe Dual Drive) tractor. manufacture was recently That novel configuration declared by Volvo to be the was a forerunner of articulated oldest running ADT in the dump trucks. The absence of a country. front axle is one pedigree The first artic trucks were, marker, but that hydraulic joint of course, primitive machines really defined it. Articulated by today’s standards. They dumper trucks owe the bulk of were durable because they their success to a similar flexishunned niceties like susble connection between the pended undercarriages and front power unit and trailing transmissions. dumper body. In the end, When Doosan literature boasts of 40 years of experience making automatic Consequently, operating ADTs are just dump trucks, ADTs, it is alluding to its Moxy heritage. them in rugged terrain — but the articulated connector sharply distinguishes them from their rigid- neering evolution to a modern ADT not yet which was exactly why they were created — complete. was a trial for the operator and stressful on bodied peers. the machine itself. They traveled no faster Meanwhile in 1957, a Yorkshire English Losing the Axle than 15 to 20 mph (24 to 32 kph) and hauled company called Northfield designed a protoThat occurred when Livab, working with 10 tons (9 t) max. Volvo’s second model — type two-axle hauler that could swing 180 degrees at mid-body using hydraulic cylin- Volvo’s tractor division, eliminated the trac- the DR860 — introduced the bogie underders. Introduced in 1960 as the Northfield tor’s front axle and firmly connected the carriage that lets wheels move up and down F7, it hauled 12 tons (10.8 t) of material. It tractor unit to the trailer using hydraulic- in irregular terrain without rocking the was ahead of its time in configuration, but powered steering linkage. This four-wheel- dumper body. Articulated trucks remained a lacked a critical component: four-wheel- drive articulated hauler was first marketed in drive. That deficiency doomed it and some 1966 as a DR 631. A 6X6 model (DR860) Scandinavian engineering experiment in the entering the market two years later. early years. In 1970, a Norwegian company other early articulated hauler designs. In an open marketplace, such engineering eventually called Moxy built a prototype 22The Doe Triple D was created in England more-or-less simultaneously with develop- advances seldom occur in a vacuum and, in ton (20 t) ADT and two years later went to ment of a tractor-trailer machine in Sweden 1967, another Swedish company, Kockum market with its model D15, a 17-ton (15.4 t) that was a truer precursor of today’s ADTs. A Landsverk, also offered a 4X4 articulated 6X6 with a bogie undercarriage. It was the company dubbed Livab crafted the dumper dumper. In the 1970s and ’80s, Volvo swal- industry’s first six-wheel-drive articulated unit with front and rear power. However, the lowed up both of the manufacturers and the truck, though Moxy executives acknowltractor still rode on a front axle, the engi- expertise they represented, giving the com- edged that the 6X6 idea came from yet
another Norwegian entrepreneur. Six drive wheels became the industry standard. Moxy trucks continue to haul materials around the world. The company has gone through a dizzying number of ownerships in the intervening years. An English company bought it in 1983 and three years later Komatsu entered an OEM relationship with it; some Moxy ADTs eventually were rebranded “Komatsu.” In 1997, Komatsu withdrew from the agreement and control of Moxy changed hands a couple more times before Doosan’s construction equipment division took it over in 2008. In 2011, the Moxy brand disappeared entirely. Doosan So when Doosan literature boasts of 40 years of experience making ADTs, it is alluding to its Moxy heritage. Brian Bereika, Doosan’s ADT product specialist, sings the praises of artic trucks in general. “It is the only piece of construction equipment that you can put more weight on its back than the machine weighs empty and ask the truck to carry it,” said Bereika. “Our DA40-5 can weigh 70,000 pounds and load 88,000 pounds and do wonders with it under stressful conditions. It took years and years of improvements for ADTs to get where they are today.” Doosan ADT engineering harkens to its Moxy heritage. The company’s 30-ton (27.2 t) and 40-ton (36.3 t) models feature an unusual mounting of the turning ring in front of the swing point, which the company see HISTORY page 50
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 47
KEEP MATERIALS MOVING AND PROFITS FLOWING. Steep slopes, deep ruts, and slipper y muck are no match for the 370E, 410E, and 460E ADTs. With impressive power and torque for exceptional power-to-weight ratios and fast cycles, these trucks haul more for less cost per ton. The all-new Deere-designed cab is sealed and pressurized to keep out dust and noise, and the fully adjustable air-ride seat makes smooth sailing of any terrain. Remote park-brake release, rollover protection, and auto horn alerts ensure compliance on the strictest of jobsites. And an optional onboard-weighing system is calibrated to two-percent accuracy. Haul more for less — call us today.
RDO EQUIPMENT CO.
PAPE MACHINERY
www.rdoequipment.com
www.papemachinery.com
Flagstaff 5500 East Penstock Ave Flagstaff, AZ 86004 928-526-0639
Chandler 1400 S Maricopa Road Chandler, AZ 85226 602-845-1800
Imperial 3275 Hwy 86 Imperial, CA 92251 760-355-4331
Pflugerville 16415 N IH-35 Pflugerville, TX 78660 512-272-4141
Phoenix 2649 N 29 Ave Phoenix, AZ 85009 602-415-4700
Lakeside 10108 Riverford Road Lakeside, CA 92040 619-443-3758
Irving 3230 East Airport Freeway Irving, TX 75062 972-438-4699
McKinney 2902N. Central Expressway McKinney, TX 75071 214-856-4899
Prescott 1091 Commerce Drive Prescott, AZ 86035 928-776-8300
Riverside 20 Iowa Avenue Riverside, CA 92507 951-778-3700
Fort Worth 5301 Mark IV Parkway Fort Worth, TX 76131 817-232-8094
New Braunfels 19275 N IH-35 New Braunfels, TX 78132 830-632-3100
Tucson 5051 S Outlet Center Drive Tucson, AZ 85706 520-294-5262
Indio 83-300 Avenue 45 Indio, CA 92201 760-342-8900
Hewitt 215 Enterprise Blvd Hewitt, TX 76673 254-666-3900
Laredo 102 Wilcox Road Laredo, TX 78043 956-718-1909
HONNEN EQUIPMENT CO. www.honnen.com
Newark 800-231-2060 510-790-3600 Fax: 510-790-9120
Rohnert Park 800-325-9401 707-584-9161 Fax: 707-584-4786
5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636
Sacramento 800-227-3399 916-922-7181 Fax: 916-922-4532
Gilroy 800-848-4150 408-848-4150 Fax: 408-848-5163
Durango, CO 970-247-4460
French Camp 800-619-6319 209-983-8122 Fax: 209-983-1105
Redding 530-241-4555 Fax: 530-241-0619
Fowler 559-834-4774 Fax: 559-834-4754
Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441
St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915
Page 48 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 49
Contact your local dealer: POWER EQUIPMENT COMPANY www.power-equip.com
Denver, CO 303-288-6801 Fax: 303-288-6809
Grand Junction, CO 970-243-0722 Fax: 970-243-0726
Colorado Springs, CO 719-392-1155 Fax: 719-390-9604
Johnstown, CO 970-669-6209 Fax: 970-669-6280
ARNOLD MACHINERY CO. www.arnoldmachinery.com
Salt Lake City, UT Sparks, NV 801-972-4000 Fax: 801-975-9434
775-356-1511 Fax: 775-356-0517
Idaho Falls, ID
Las Vegas, NV
208-523-0822 Fax: 208-523-9918
702-642-9000 Fax: 702-642-8808
Meridian, ID
Phoenix, AZ
208-887-6000 Fax: 208-887-6013
602-414-1900 Fax: 602-414-1904
Twin Falls, ID
Tucson, AZ
208-733-1715 Fax: 208-734-6924
520-294-7677 Fax: 520-294-7670
SIERRA MACHINERY, INC. www.sierraelpaso.com
El Paso, TX
Artesia, NM
915-772-0613 Fax: 915-772-1964
575-746-6592
ROMCO EQUIPMENT CO. www.romco.com
Austin
Houston
Round Rock, TX 512-388-2529 877-851-1026 Fax: 512-388-1781
Houston, TX 713-937-3005 800-865-6998 Fax: 713-937-7541
Buffalo
Longview
Buffalo, TX 903-322-5602 Fax: 903-322-5605
Longview, TX 903-758-5576 Fax: 903-758-3079
Carmine
Rio Grande Valley
Carmine, TX 979-278-3570 Fax: 979-278-3573
Dallas Dallas, TX 214-819-4100 800-227-6626 Fax: 214-819-4102
Ft. Worth Ft. Worth, TX 817-626-2288 866-966-4602 Fax: 817-626-8983
Mercedes, TX 956-565-0100 Fax: 956-565-1765
San Antonio San Antonio, TX 210-648-4600 800-966-4601 Fax: 210-648-1282
ROL Remote Oilfield Location Three Rivers, TX 361-254-2317
PACWEST MACHINERY
Some companies have you choose power or fuel efficiency. You chose both.
www.PacWestMachinery.com
Spokane, WA
Eugene, OR
509-534-5933
541-302-3762
Portland, OR
Kent, WA
503-252-5933
206-762-5933
Volvo developed the industry’s first fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus your attention on more important things — like growing your business. Get the details at volvoce.com/smartfuel.
Page 50 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Contractors Favor 30 to 40-Ton Machines in North America HISTORY from page 46
claims equally distributes weight to each front wheel in uneven terrain thereby maximizing the traction of each tire. The trucks also have independent front suspensions with leading arms instead of front axles. Rear wheels on Doosan artic trucks ride on free-swinging tandem housings served by one axle, instead of two, and are powered through one driveline and differential. The result, said Bereika, is fewer wear items to replace over the long haul and more reliable ground contact on each haul. “All the wheels are on the ground 100 percent of the time. In competing brands, tires come off the ground easily when they encounter ground height differences as little as five inches,” he said. Volvo Volvo has just introduced its largest artic truck, the A60H. Mats Karlsson, global director of Volvo Construction Equipment’s hauler platform, said the new truck is a culmination of a half century of ADT-building. “Over the years, the company has built up a vast amount of knowledge and experience connected to this product,” said Karlsson. “This knowledge was used to develop the new 60-ton class A60H.” Specifically, Karlsson said Volvo “has found the optimum combination and interaction of the powertrain layout, center of gravity, tire ground pressure, machine layout, vehicle dynamics, and so on. The target is to achieve best-in-class productivity.” Comparative claims of “best in class” are tricky, with several manufacturers claiming the “best” distinction in one category or another. But Volvo’s claim to have an “award-winning” onboard weighing system is indisputable. The system won an Internet Innovation Award. It uses full suspension pressure sensors to monitor load weight and relays the information to onboard software that displays it for the operator and also telematically shares it with mobile devices. Volvo also claims its retarding/braking system is unique, employing the patented Volvo Engine Brake. “From a performance and fuel efficiency perspective, the total system is outstanding,” Karlsson said. “The A60H is capable of climbing hills up to 45 degrees.” Caterpillar Caterpillar got into artic trucks in 1985, supplying components to DJB Engineering in England, which had been producing the machines for a decade. In 1996, Cat bought out DJB and Caterpillar-branded ADTs rolled into the market. The company recently introduced its 745C 45-ton truck, its largest ever. Cat’s senior product application specialist
Komatsu prides itself on all its ADT parts being manufactured by the company itself, a strategy the company terms “Komatsu Harmony.”
The Cat 745C AT with HEX bucket at work.
for artic trucks, Scott Thomas, cites Caterpillar’s automatic traction control system as the defining characteristic of Cat ADTs. It is standard on all models. “There is absolutely nothing an operator has to do to engage all six wheels,” said Thomas. “In most competing brands, operators have to push a button, but Cat’s automatic traction control automatically engages torque to each of those wheels and crossaxles. “The same is true of Cat’s automatic retarding control,” he said. “The truck handles the gears and brakes the truck at a safe, controlled speed and all the operator has to do is take his foot off the accelerator. A lot of times, driving one of these trucks is an entrylevel position. Beginners can drive these trucks safely and efficiently because by making things automatic the operator can concentrate on his surroundings.” The 745C’s “high density power shift” transmission is a proprietary engineering feature that Cat shares with three other companies, none of the others in construction equipment. It features more gears and forward speeds, less weight, and 18 percent fewer parts than rival transmissions. “All of that adds up to more productivity,” Thomas said. Komatsu Sixteen years after parting ways with Moxy, Komatsu has 30-ton and 44-ton (40 t) artic truck models that have found a comfortable place in the market. The company prides itself on all its ADT parts being manufactured by the company itself, a strategy
Volvo first marketed this four-wheel-drive articulated hauler in 1966 as a DR 631.
see HISTORY page 52
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 51
OUR TRUCKS.
www.CurrySupply.com www.Curry Supply.com | 800.345.2829 One of America’s America’s largest largest manufacturers manufacturers of commer commercial cial ser service vice vehicles, since 1932.
Page 52 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Manufacturers Continue Developing Larger Artic Trucks HISTORY from page 50
the company terms “Komatsu Harmony.” “When components are designed and built inhouse, they work together much better than when taking an engine manufactured elsewhere and coupling it to a transmission intended primarily for some other purpose,” said Rob McMahon, product marketing manager of Komatsu America. One of those components is Komatsu’s electronically controlled transmission system, which monitors and controls both engine and transmission to produce smoother shifts and fewer jolts to the power train. This is coupled to the company’s traction control system, which constantly monitors wheel speeds on the front and middle axles. When slippage is detected, an inter-axle lock is engaged and independent brake assemblies applied to boost traction on all wheels. McMahon said the system helps control a truck in soft ground conditions without compromising steering, as occurs with a differential lock-up system. “During testing of the newly designed machines in 2001, our ADTs were given a shot at a couple of locations where customers had given up on other manufacturers’ models,” said McMahon. “The condition of the roads was really demanding. Other machines couldn’t handle it. Ours did and the transmission is a big part of it.” Deere Deere Construction got its start with artic trucks in 1999 through a strategic agreement with South Africa’s Bell Equipment, which had been manufacturing the trucks for about 15 years. The relationship continues in some respects but the companies decided in 2011 to manufacture ADTs separately. Subsequently, in 2012, Deere introduced its E series. Three years later when it introduced its Tier IV Final-powered units, the company went to a new cab design with better sound-proofing and ergonomics. Deere ADTs have the usual ADT features, including a braking/retarding system for grades, a traction control system that is either automatically engaged or engaged by an operator while on the move, and onboard load weighing. “The onboard weighing system is a great feature, because it ensures that you are not leaving any dumper space unused. It is a way of really maximizing the truck’s payload,” said Maryanne Graves, ADT product marketing manager, adding that the feature is not for everyone. “Some guys who have done it a long time just know when the truck is full and call it good.” Deere claims that its artic trucks have the best-in-class payload-to-weight ratio, particularly the 370, 410 and 460 E series models.
According to the company, Deere claims that its artic trucks, including the Deere 460E, have the best-in-class payload-to-weight ratio.
“We made some significant improvements in the ratio,” Graves said. “We constantly have to balance power and payloads. You want maximum payloads, but without making trucks a lot heavier. We managed a 13 percent improvement in the payload-topower ratio in the 370E, and pretty much the same for the 410 and 460.” Bell Bell Equipment continues to build on its 30 years of making ADTs. The South African manufacturer has had dealers in this country for almost that long. Wayne Michels, vice president and general manager of Bell Trucks America, said the Tier IV Final engine on Bell artic trucks is a big plus for the brand. “Mercedes-Benz has been able to employ a system that doesn’t use a diesel particulate filter, so operators don’t periodically have to do a re-gen,” said Michels. “The re-gen process severely hurts fuel consumption. Consequently, one of the outstanding features of Bell trucks is that our fuel consumption is less than anyone else’s.” Bell’s onboard weighing system is standard on all its trucks, not optional as in some other makes. The system utilizes printed circuit boards that are attached to the frame of a truck and can sense actual physical stresses on the steel. “The naked eye can’t see it but the sensors do,” said Michels. Bell has just introduced into the U.S. market its B60E, a 55-ton (50 t) artic hybrid that combines a 50-ton (45.3 t) articulated tractor unit and a rigid dumper body. The fourwheel-drive truck can be driven places that the operator of a rigid truck of similar tonnage would fear to go and can turn in a short-
er radius. Michels said the truck was initially developed for a South African market where coal, diamond and gold mines lack improved roads for rigid trucks, but a B60E began working a Texas job site in August and more have been ordered for sale in the United States. “This is a completely new market for us,” he said. “I have been in the truck business for 40 years and I think we have a two-year window before competitors X, Y and Z decide this is a good thing. We believe it is going to be a good market.” Bell offers more than a dozen artic trucks that range incrementally from 20-ton to 55 tons. Market Trends So where in this wide range of ADT models is the sweet spot for artic truck builders? “Seventy-five percent of artic truck products coming into North America are 30-ton and 40-ton machines,” said Bereika, the Doosan product specialist. “So our models are in almost 80 percent of the base market. For us, the 30-ton is the most popular.” Bereika said Doosan developed a 50-ton model in 2008 but never brought it to market. “We are looking at it again because of recent demand for bigger trucks,” he said. “We are researching the market possibilities of 50- and 60-ton trucks, but we’re also working on making the models we have as productive, reliable and safe as we can make them. I think the bulk of the market for a long, long time will be 40-ton and smaller.” Deere is focusing on both ends of the market, according to Graves. Two new smaller models are being introduced in December, yet its two biggest sellers are the 410E 41-
ton (37 t) and 460E 46-ton (41.7 t) models. “The trend seems to be to larger trucks. We have seen sales of trucks in the 35-ton range almost double in the last decade,” she said. “But there absolutely still is a future market for smaller trucks. That is not going away. It will remain a strong component of the marketplace.” Caterpillar’s Thomas also sees multiple trends in the market, but a movement toward larger artic trucks is the dominant one. The 745C is Cat’s largest model and also its most popular. Thomas said the company continues to monitor sales to determine where it needs to position itself. “If the market tells us to go bigger, we’ll go there,” he said. Thomas also observes that the economic downturn eight years ago still is having an impact on truck sales. Consequently, ADT rentals account for almost 50 percent of the movement of trucks from dealers’ equipment yards. “Customers are still leery about building back their inventory,” he said. “They just wait and see if they get a job and if they do, they rent a few trucks to do it.” Karlsson said Volvo’s 60-ton (54.4 t) A60H “meets growing customer demand for articulated haulers with larger capacities.” So are larger units in the works at Volvo? Karlsson won’t say. “I’m unable to disclose what the future holds. That would spoil the surprise,” he said. The most popular models for Bell Trucks America are the 30-ton and 40-ton units. But Michels, the VP-general manager, said it is an evolving situation. “For a long time we have seen the biggest market was in the 30-ton range, but more and more people are turning to the 40-ton truck. Today, the 30-ton still is the most popular in sheer numbers, but the 40-ton market is growing faster,” he said. So the market may shake out in favor of one size or another, or it may remain mixed. That will be determined partly by which applications on the spectrum of uses — property development to mining — dominate the ADT market. And it might also depend upon where in the world the machines are being operated. “In North America, I think you will see a lot of the larger machines being used,” Thomas said. “I attribute that to us having the greatest transportation system in the world. You can put a large machine on a low-boy in Maryland and send it to work in California. You can’t do that in South America and some other places.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 53
www.mashburnequipment.com
New 2016 Models Available 2014 Bell B30E 1600 HRS $267,500
2014 Bell B30E 1900 HRS $264,500
2011 Terex TA300 3000 HRS $142,500
2008 Volvo A25E $99,500
2014 Bell B30E 1400 HRS $269,500
2014 Bell B30E 2300 HRS $259,500
2014 Deere 300D II 1400 HRS $285,000 2013 Terex TA250 5 Avaliable $129,500
425 Frontage Road • Ringgold, GA 30736 2014 Bell B30E 2200 HRS $259,500
706-935-3485
Deere 300D 5 Avaliable
Page 54 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Cat C2 Series Articulated Trucks Feature More Power The Cat C2 Series articulated dump truck range includes the 314 hp (234 kW) 725C2 and the 367-hp (274 kW) 730C2 and 730C2 EJ with ejector-type body. Rated payloads are 26.5 tons (24 t) for the 725C2 and 31 tons (28 t) for the two larger models. Standard automatic traction control ensures efficient operation of the new models, which advance the design of predecessor models with increased productivity, lower operating costs, and added rimpull/retarding capability, while retaining the long-term durability, high availability, high resale value and optimum rental margins of previous models. Powertrain Engines in all three models are available that meet or are equivalent to world emission standards: U.S. EPA Tier II/EU Stage II, Tier III/Stage IIIA, or Tier IV Final/Stage IV. A diesel particulate filter and selective catalytic reduction system provide exhaust aftertreatment for Tier IV Final/Stage IV models. The Cat 6F/1R power-shift transmission electronically modulates clutch engagement pressures for smooth, positive shifts and incorporates the Caterpillar Advanced Productivity Electronic Control Strategy (APECS) system. The APECS system improves acceleration, maintains torque converter lock-up (and ground speed) during shifts, provides automatic speed holding, and modifies shift points to match operating conditions. Net benefits include high productivity, optimum control and increased fuel economy For controlling downhill speed, the 730C2 and 730C2 EJ employ an enginecompression brake that provides 60 percent more retarding force than previous models. The 725C2 uses a fluid retarder with four operating modes. Both systems effectively manage speed and minimize service brake application for extended brake life. All three new C2 Series models feature full-time, six-wheel drive and are equipped with wet disc clutch locks in the cross axle and inter-axle differentials. Automatic, on the go application of the locks is fully proportional, engaging only the required amount of lockup to maintain traction in adverse conditions — with no input from the operator. Also, new for the C2 range is allaxle wet brakes. The sealed system prevents the ingress of debris and extends brake life. Structures and Suspension The new C2 Series models feature field proven major structures that ensure long term durability in severe applications. The front frame incorporates box section longitudinal beams, and the rear frame uses a fourplate box construction to reduce stress points. The hitch retains its durable two-
The Cat C2 Series articulated dump truck range includes the 314 hp (234 kW) 725C2 and the 367-hp (274 kW) 730C2 and 730C2 EJ with ejector-type body. Rated payloads are 26.5 tons (24 t) for the 725C2 and 31 tons (28 t) for the two larger models.
piece construction, using a cast-steel head bolted to a hard wearing, forged steel tube that maintains a tight, trouble free connection between the frames, according to the manufacturer. Three-point, oil/nitrogen front suspension and walking-beam rear suspension effectively absorb haul road impact to allow safe, high speed travel. The newly design dump body, using high strength Brinell HB450 wear resistant steel for added resistance to impact and abrasion, features a diverging flow design that promotes clean dumping and minimizes material carry- back. The body top rail design reduces material spillage in the loading area, and a fully welded front bumper and full-width belly pan provide enhanced machine protection. Operator Environment The spacious two-person cab features a multi adjustable air suspension seat for the operator; a full size, forward facing seat for the trainer; tilting/telescopic steering wheel, and convenient wrap around dash. A multipurpose color display provides pertinent operating information, as well as the feed from the rearview camera when activated. The low, sloping hood of the new models, coupled with the operator's central position and extensive glass area, ensures excellent
all-around visibility. Intuitive, low effort controls contribute to safe operation and operator convenience.
drain intervals for engine oil and hydraulic fluid lower maintenance costs, as do adjustment-free wheel bearings.
Safety and Serviceability Machine headlights and turn indicators (mounted wide on the machine), combined with high- mounted LED width-position marker lights contribute to improved night time working safety. An extensive handrail system, slip-resistant surfaces, and large, wide-angle mirrors (available in a heated a version) further enhance overall safety. To promote safe operation, the cab features integral ROPS/FOPS construction. An electro-hydraulic secondary steering system automatically activates in low pressure situations. The park brake is spring applied, hydraulically released. External switches for fuel cut-off and electrical disconnect are easily accessible outside the machine. An electric hood, which is raised and lowered via a switch in the cab, provides ample access to routine service points, and the rear of cab mounting of the radiator (using long life coolant) allows easy access for cleaning. The cab tilts for access to the transmission, drive shafts and hydraulic components, and an electrical service center in the cab provides a power port, diagnostic connector, and Cat Data Link connector. Extended
Productivity The optional Cat production measurement system brings payload weighing to the cab, helping operators work more productively and accurately. The integrated system calculates payload values using sensors located on the walking beam suspension and shows when target weight is reached, thus maximizing payloads and productivity, while reducing overloading that results in premature wear. Technology Part of LINK technologies, the Product Link system wirelessly connects owners to their equipment, providing access to valuable machine data such as location, hours, fuel consumption, idle time, events, and diagnostic codes for analysis and reporting via the online VisionLink user interface. LINK information assists with fact-based decision making to help increase efficiency and lower owning and operating costs. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 55
New Hydrema U.S. Headquarters now located at:
4515 Hemingway Trail • Cumming, GA 30041 www.hydrema.us Lufkin 936-632-6775
Nederland 409-722-7368
Bryan 979-775-7368
Channelview 281-452-7368
www.mustangcat.com
Houston, Bingle 713-838-7368
Freeport 979-233-7368
Houston, SW 713-838-7368
Conroe 936-788-7368
Page 56 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Find the Best ADT Finance Option One of the reasons you may like renting an articulated dump truck (ADT) for your projects is the ability to have short-term access to high-capacity and reliable machinery for moving materials in any terrain you encounter — especially in muddy or difficult terrain. Whether you are moving dirt or aggregates in site development, road construction or any building project where mass excavation is required, an ADT can provide fast and efficient dumping. “ADTs are popular because they have the horsepower, torque and gear ratios to complete jobs efficiently,” said Brian Bereika, Doosan ADT product specialist. However, ADTs can be one of the most expensive machines on a construction site if they are not fully utilized. Many business owners find it more economical to rent a machine before purchasing if work is not consistent on a daily or weekly basis. During that rental term, though, you could be quickly building equity that can be converted into a financing option towards ownership. Put Equity to Work Financing construction equipment is still a popular route to ownership because this equipment, unlike equipment in other industries, typically is not faced by obsolescence. If you have already identified the future projects and resources to justify owning an ADT, there are some compelling finance options to consider. The three most commonly used types of financing in the industry include rent-to-purchase options, traditional loans and leasing. Equipment dealers are very adept at structuring rent-to-purchase option agreements that may be favorable for your business. In addition to the benefits of reducing fleet costs and eliminating service, an RPO may represent an opportunity for owners with a short-term need that turns into a long-term solution. Manufacturers also are making attractive loan and leasing choices available for customers who would like to convert their current rental plan into ownership. Most offer belowmarket financing as low as 0 to 2.9 percent — rates that would not be available for you to secure through a conventional lender. At the same time, there is a growth trend occurring in leasing as the economy continues to improve from the long-lasting effects of the last recession. Leasing is an option that may provide a single and often lower monthly payment and may include a bundled extended warranty. Choose Your Best Option While the three most-popular financing options provide different advantages and benefits for your operation, the most important factors to evaluate with each option is how long you plan to keep the ADT, what target payment you require and whether you need flexibility to return the ADT without further obligation to the lessor. Rent-to-Purchase Option If you are hesitant to make a capital investment in equipment, a rent-to-purchase option agreement (RPO) may serve your short-term equipment needs. It can be structured to transfer a portion of a rental fee toward purchasing the machine, or you can return it at the end of the rental period. Although ADTs can be rented for a shorter term than loan or lease alternatives, the trade-off is generally higher rental rates. Traditional Loan With less loan delinquency in the market, it is much easier to secure financing today than a few years ago. Loan
approval rates by lending institutions, manufacturers and the Equipment Leasing and Finance Association are up overall. Loan rates — especially those offered by manufacturers — are relatively low and attractive right now, and payment terms are usually longer. However, the most important aspects to evaluate with a loan are the term and the interest rate, as they are the primary drivers of the loan payment. Leasing A hybrid between a rental and a purchase, there has been an uptick in leasing solutions. Leasing typically provides the lowest payment scenarios and the best hedge for potential declines in equipment values. Because leases are structured only for the use of an ADT during the lease term, they enable you to customize a financing program to meet your business’s cash flow issues, including budgeting, and transaction and cyclical fluctuations. Less flexible than a short-term rental, leases can be an appealing alternative if you do not have an appetite for additional depreciation. Seasonal leases are still popular as they help to slot payments into their busiest months, and avoid payments during the off-season. Additionally, leasing equipment has different tax implications than conventional forms of financing. In most cases, the entire lease payment can be deducted as a business expense over the course of the lease contract; however, you should confirm your individual situation with a tax professional to be sure. Determine the Crossover Regardless of which route makes the most sense for you, it is important to determine and monitor the crossover point in which you have built enough equity in an articulated dump truck through rental that you could effectively lower your payment by exercising your purchase option. For example, let us imagine that you are renting a 30-metric-ton ADT for 6 to 12 months at rates that typically range from $8,000 to $12,000 per month, depending on your specific location and arrangement. At the end of that term, you could have accumulated anywhere from $50,000 up to $150,000 in equity, which could represent more than 50 percent of the purchase price of a machine that likely has a good residual value. At this crossover point what matters more than the acquisition cost of the machine is finding the right finance option that will help you convert to ownership and set you up with a monthly payment you can afford to accomplish that goal. In fact, the sooner you can give a dealership representative an indication that you may be interested in converting rental arrangements to potential ownership, the better. It is recommended that business owners have open discussions up front about the terms involved with applying rental fees. If you wait until the end of the term, some organizations may not apply the full rental amount that you accumulated to a purchase deal. As you consider ownership of an ADT, you have already made a smart choice by renting a unit first. It is helped you better understand the performance of the machine, opened up lines of communication with your equipment supplier and provided an opportunity to explore your purchase options. If you have put your business in a position to add a truck to your fleet, it has never been easier to find a finance option that will convert your valuable equity into ownership for long-term productivity. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
KOMATSU EQUIPMENT COMPANY 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557 3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 1409 East 3850 South St. George, UT 84790 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300
ROAD MACHINERY www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681 Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 800-989-7121 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 57
KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000 www.kirby-smith.com
THE MOST RUGGED TRUCKS
t #VJMU JO QBZMPBE NFUFS BOE FYUFSOBM EJTQMBZ MBNQT
t )ZESBVMJD XFU NVMUJ EJTD CSBLFT XJUI SFUBSEFS t ,PNBUTV USBDUJPO DPOUSPM TZTUFN t 4FMFDUBCMF XPSLJOH NPEFT
POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188 Durango, CO 970-259-0455 Cheyenne, WY 307-634-5149 www.powermotivecorp.com
WAUKESHA-PEARCE INDUSTRIES, INC. 12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-7150 www.wpi.com
SUPPORTED WITH PRIDE
Page 58 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Articulated (A)/ Rigid (R)
Mfg. Model
Drive Configuration
BELL B25E B30E B35E B40E B45E B50E B60E
CATERPILLAR 770 770G 770G Tier IV 772 772G 772G Tier IV 773G 775G 777G 785D 789D 793F MT5300D AC 795F AC 797F
R R R R R R R R R R R R R R R
2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD 2WD
HITACHI EH1100-5 EH1700-3 EH3500AC-3 EH4000AC-3 EH5000AC-3
R R R R R
HYDREMA TRUCKS 912ES 912HM 912HM Water Tanker 912HM Flatbed 922HM 912ES Rail
A A A A A A
JOHN DEERE 250D Series II 300D Series II 370E 410E 460E
A A A A A
TEREX TRUCKS TA400 TA250 TA300 TR100 TR45 TR60 TR70
43,350 (19,660) 44,400 (20,140) 66,974 (30,379) 70,078 (31,787) 70 227 (31,877) 77,821 (35,299) 93,644 (42,476)
6x6 6x6 6x6 6x6 6x6 6x6 4X4
A A A A A A A
Articulated Articulated Articulated Rigid Rigid Rigid Rigid
Operating Weight Pounds (kgs)
RWD RWD RWD RWD RWD
134,912 (61,195) 157,000 (71,214) 157,000 (71,214) 158,044 (71,688) 181,000 (82,100) 181,000 (82,100) 251,416 (114,040) 274,705 (124,604) 401,955 (182,324) 550,000 (249,476) 700,000 (317,515) 851,000 (386,007) 1,150,000 (521,631) 1,257,000 (570,166) 1,375,000 (623,690) 240,194 (108,950) 360,008 (163,300) 709,888 (322,000) 846,575 (384,000) 1,102,310 (500,000)
4x4 4x4 4x4 4x4 6x6 4x4
17,637 (8,000) 19,224 (8,720) 18,210 (8,260) 18,000 (8,165) 35,540 (16,120) 22,050 (9,979)
6x6 6x6 6x6 6x6 6x6
40,340 (18,314) 42,990 (19,541) 67,862 (30,782) 70,224 (31,853) 71,028 (32,218)
6x6 6x6 6x6 4x2 4x2 4x2 4x2
152,978 (69,390) 106,393 (48,259) 115,081 (52,200) 347,710 (157,720) 171,870 (77,960) 210,940 (95,680) 248,440 (112,690)
Engine Type
Rated Payload Tons (Metric Tons) 26.45 (24.0) 30.86 (28.0) 37.0 (33.5) 43.0 (39.0) 45.2 (41.0) 50.0 (45.4) 60.62 (55.0)
Drive System Mech/Electr.
TF4 Mercedes Benz OM 936LA TF4 Mercedes Benz OM 936LA T4F Mercedes Benz OM471LA T4F Mercedes Benz OM471LA T4F Mercedes Benz OM471LA T4F Mercedes Benz OM473LA T4F Mercedes Benz OM473LA
36 (32.7) 40 (36.3) 40 (36.3) 46 (41.7) 50 (45.4) 50 (45.4) 55.3 (50.1) 64 (58.1) 95.2 (86.4) 136 (123.4) 181 (164.2) 227 (205.9) 290 (263.1) 318 (288.5) 363 (329.3) 77 (69.85) 115.39 (104.7) 200 (181) 243 (221) 352 (319)
11 (10) 11 (10) 11 (10) 11 (10) 22 (20) 11 (10) 25.5 (23.2) 30.1 (27.3) 37.1 (33.7) 41.1 (37.3) 46.1 (41.8) 41.9 (38) 27.5 (25) 30.9 (28) 100 (91) 45 (41) 60 (55) 72 (65)
NEQUIPMENTGUIDE.COM VISIT WWW.CONSTRUCTIO TRUCK LISTINGS. FOR COMPLETE OFF ROAD
Cat C15 ACERT Cat C15 ACERT Cat C15 ACERT Cat C18 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C27 ACERT Cat C32 ACERT Cat 3512C HD Cat 3516C HD Cat C175-16 Cat C175-16 Cat C175-16 Cat C175-20
M M M M M M M
Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto AC Elec AC Elec Auto
Cummins QSK23 Cummins QST30 Cummins QSKTA50-CE Cummins QSKTA60-CE Cummins QSKTTA60-CE
M M E E E
IVi Turbo Diesel M Cummins QSB 4.5 EPA Tier IVi Turbo Diesel M Tier Cummins QSB 4.5 EPA IVi Turbo Diesel M Cummins QSB 4.5 EPA Tier IVi Turbo Diesel M Tier EPA 4.5 B QS ins Cumm IVi Turbo Diesel M Cummins QSB, 6.7 EPA TierIVi Turbo Diesel M Tier EPA 4.5 Cummins QSB s 6090 IT4 engine John Deere PowerTech Plus 6090 IT4 engine Plu ech erT Pow John Deere 5 FT4 engine John Deere PowerTech 6135 FT4 engine 613 ech erT John Deere Pow 5 FT4 engine John Deere PowerTech 613 Scania DC13 Scania DC9 Scania DC9 00TA DDEC Detroit Diesel MTU 16V-20 Cummins QSK19-C525 Cummins QSK19-C700 DDEC 00TA Detroit Diesel MTU 12V-20
M M M M M M M M M M M M
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 59
Mfg. Model
Articulated/ Rigid
DOOSAN DA30-5 DA40-5
6x6 6x6
A A
KOMATSU HM300-5 HM400-5 HD325-7 HD405-7 HD465-8 HD605-8 HD785-7 HD1500-7 730E-8 830E-1AC 860E-1K 930E-4 930E-4SE 960E-2 960E-2K 980E-4
VOLVO A35G A35G FS A40G A40G FS A25G A30G A60H
Drive Configuration
A A R R R R R R R R R R R R R R A A A A A A A
6WD 6WD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD 6x6 6x6 6x6 6x6 6x6 6x6 4x6 and 6x6
Operating Weight Pounds (kgs) 113,318 (51,400) 158,292 (71,800) 117,881 (53,470) 165,644 (75,135) 152,740 (69,280) 165,520 (75,080) 228,178 (103,500) 252,870 (114,700) 360,253 (163,408) 550,000 (249,478) 724,000 (328,401) 850,650 (385,848) 1,001,700 ( 454,363) 1,106,670 (501,974) 1,115,000 (505,755) 1,270,000 (576,072) 1,270,000 (576,072) 1,378,500 (625,277) 138,230 (62,700) 139,112 (63,100) 153,662 (69,700) 154,765 (70,200) 102,515 (46,500) 113,759 (51,600) 217,700 (98,750)
Rated Payload Tons (Metric Tons) 31 (28) 44 (40) 30.9 (28) 44.1 (40) 40 (36.5) 45.2 (41) 61 (55) 69.4 (63) 100.3 (91.0) 158.9 (144.1) 200 (181) 244 (222) 280 (254) 320 (290) 320 (290) 360 (327) 360 (327) 407 (369) 37 (33.5) 37 (33.5) 43 (39.0) 43 (39.0) 26.5 (24) 31 (28.1) 60.6 (33.6)
Engine Type Scania DC9 Scania DC13 Komatsu SAA6D125E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-5 Komatsu SAA6D140E-5 Komatsu SAA6D170E-7 Komatsu SAA6D170E-7 Komatsu SAA12V140E-3 Komatsu SDA16V159E-2 Komatsu SSDA16V159 Komatsu SDA16V160 Komatsu SSDA16V160 Komatsu SSDA16V160 Komatsu SSDA18V170 Komatsu SSDA18V170 Komatsu SSDA18V170 Komatsu SSDA18V170 Volvo D13J/16J Volvo D13J/16J Volvo D13J/16J Volvo D13J/16J Volvo D11L Volvo D11L Volvo D16J
Drive System Mech/Electr. M M M M M M M M M M AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec AC Elec M M M M M M M
Windisch Selects Terex Trucks to Help Link Vienna to Brno Five Terex Trucks 31 ton (28 t) capacity TA300s have been selected by local contractor Windisch to take part in the expansion of the North Autobahn (A5), which will form a modern highway between Vienna in Austria and Brno in the Czech Republic. The proven performers work 12-hour shifts, six days a week, and are responsible for shifting 1.8 million cu. yds. (1.4 million cu m) of earth. Scheduled for completion in 2017, the project was implemented by Austria’s Autobahn and highway financing stock corporation, ASFiNAG. The A5 is already a popular route due to the international checkpoint at Drasenhofen, and the extension will be welcomed by commuters as it will ease traffic build up, shorten the 81 mi. (130 km) transit time between the two cities, and reduce noise pollution. The articulated haulers for the A5 project were supplied to Windisch by Terex Trucks’Austrian distributor, Mlecka Construction. Founded in 2011, Mlecka is a family-run construction company
Five Terex Trucks 31 ton (28 t) capacity TA300s have been selected to take part in the expansion of the North Autobahn (A5), which will form a modern highway between Vienna in Austria and Brno in the Czech Republic.
based just outside of Vienna in Oeynhausen. Appointed an official Terex Trucks dealer in 2015, Mlecka has strong connections in Austria, Slovenia and Hungary. John Mlonek, commercial sales manager at Terex Trucks, said:
“Like other EU countries, the Austrian market has proved difficult but the extension of the North Autobahn is one of the brighter investments in the tough articulated hauler market. “Windisch was looking at other
brands but chose to go with Terex Trucks, which is a real vote of confidence for our robust Scottish machines.” Created at the Motherwell factory, the TA300 is built to work harder for longer. Its leading tractive
effort and effective power to weight ratios ensure material is moved as quickly as possible in all conditions — providing increased productivity and low cost of operation. With fully independent front suspension as standard, tire/ground contact is maintained regardless of the terrain, increasing tractive effort and reducing cycle times while also providing operators with a comfortable haul, according to the manufacturer. In addition, the transmission retardation system in combination with engine exhaust brake support the fully-enclosed oil-cooled multidisc brakes for enhanced protection of the brakes, resulting in less maintenance and a longer life span for the brakes. The machine also is powered by a fuel-efficient five cylinder Scania DC9 engine, which develops gross power of 370 hp (276 kW) and maximum torque of 1,880 Nm. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 60 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Hitachi Launches Trucks for Large-Scale Mining Operations Hitachi Construction Machinery – Americas’s two rigid-frame haul truck models — the EH3500AC-3 (nominal payload with standard equipment of 200 tons [181 t], target gross machine operating weight of 709,888 lb. [322,000 kg]), and the EH4000AC-3 (nominal payload with standard equipment of 243.6 tons [221 t], target gross machine operating weight of 846,575 lb. [384,000 kg]) — are designed for use in large-scale mining operations. The two rigid-frame haul truck models are equipped with an advanced AC-drive system that was developed with Hitachi Group technologies employed in conventional models. Improvements include various sensors that provide information on drive conditions. The result is the Hitachi drive control system that reduces tire slippage on acceleration and tire lock-up during braking, and prevents chassis oscillation in a front-rear direction and tire skid while steering, according to the manufacturer. In addition, to satisfy the request of customers worldwide, Hitachi is giving customers outside of North America a choice between engines from two different companies. This option also is available for the EH5000AC-3 rigid haul truck, which was launched in February 2013. The release of these two rigidframe haul truck models completes the lineup for the EH AC-3 series of haulers equipped with an ACdrive system. Along with the company’s ultra-large hydraulic excavators, for which Hitachi boasts a high market share, Hitachi plans to supply these rigid haul truck models to contribute to the improvement of productivity at mines around the world. Main Features 1. Increased mobility and productivity Hitachi couples the AC-drive system, which has a high loadresponsive IGBT inverter, with drive control software that was jointly developed with other Hitachi Group companies, to achieve a system that excels in controlling travel motor speed and torque. Whether taking off from a
The two rigid-frame haul truck models are equipped with an advanced AC-drive system that was developed with Hitachi Group technologies employed in conventional models.
standstill, ascending grades or performing steering maneuvers, the system delivers an optimal, individual amount of power to each of the travel motors for smooth, quick operation. In addition to adding various sensors that detect vehicle motion, this is the first time in this class of machinery that models employ the Hitachi drive control system, which aims to achieve higher drive control performance by reducing tire slippage on acceleration and tire lock-up during braking, and preventing chassis oscillation in a front-rear direction and tire skid while steering. Consequently, the trucks boast strong and steady travel performance that ensures more stable jobsite haul-cycle times, which contributes to higher productivity.
These two models also feature powerful electric brakes that are activated during downhill driving. Since these trucks do not require the use of mechanical brakes during normal driving, not only is deceleration smoother but maintenance for the mechanical brakes is required less frequently. 2. Increased operability In the wide-berth cab, which is capable of housing two full-size seats, a large LCD display is located at the base of the handle. The display is in clear view and quickly provides the operator with information and warnings on drive operations such as traveling speed, engine turnover and hauling performance. In addition, the multilingual display allows users to view information and warnings in their own language, thereby contribut-
ing to improved serviceability and safety. Due to a powerful electric brake, the haulers can be normally operated using two pedals, one for acceleration and one for the brakes. Easier operability alleviates operator fatigue. Hitachi located the levers and switches for operating the body in the center console, making it possible to operate the body with one hand. 3. Increased reliability and safety The mainframe’s structural design, including the cab support, is improved and fortified based on operating information Hitachi gathered on conventional models being used around the world. The company added a temperature sensor to the bearing area of
the alternator and drive motor, which are the main components of the AC-drive system. An alarm sounds when the sensor detects abnormal heat emission and restricts driving operations to prevent sudden damage to the machine. Improvements were made to the nominal payload measurement system to increase the reliability of production volume measurements at mining sites. Measurement errors have been reduced by reflecting changes in fuel weight within the fuel tank into the nominal payload. ROPS and FOPS are built into every truck cab as a standard safety requirement to withstand the impact of falling objects or a truck rollover. Other standard safety features include two mirrors with front and rear view cameras to provide extensive truck perimeter visibility, ample width truck access stairways and four engine stop switches located outside the cab to allow the operator to turn off the engine in an emergency situation during maintenance. In addition, the wide cab features ample foot space to improve the operating environment. The peripheral vision support system feature provides another view to support the operator. 4. Superior maintenance and serviceability The evacuator exhaust valve for the engine suction filter and electric grease pump are among the new features added to further improve daily maintenance. Other standard features for maintenance include a trailing arm front suspension that permits strut removal without tire removal, a centralized auto-grease system accessible from the ground, a battery and relay box located in the front bumper for easy access, and a maintenance deck in the rear of the cab. Outside of North America, Hitachi is now offering customers the option of choosing between the standard feature Cummins Inc. engine and one by MTU Friedrichshafen GmbH. For more information, visit www.HitachiConstruction.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 61
Largest in Lineup…
John Deere 460E Delivers Big Time With Large Body
Introducing Isuzu REDTech™ Tier 4 and beyond Diesel Engines
R e d T
ELIABLE Over 20 Million Engines Worldwide Worldwide
CO-FRIENDLY
The 460E is the largest ADT in the John Deere lineup.
Designed and built in Davenport, Iowa, the 460E is the largest ADT in the John Deere lineup. The 481 hp machine delivers big-time productivity through a large dump body and fast cycle times. Exclusive features such as remote parkbrake release, rollover protection, ground-level service, and auto horn help keep operators out of harm’s way. The quieter Deere-designed cab is sealed and pressurized to keep out dust and noise and the 460E employs a heavyduty fabricated frame and high-alloy steel dump body, ensuring best-in-class payload-to-weight ratios. It also comes loaded with an EPA Final Tier IV (FT4)/EU Stage IV John Deere Power Tech diesel engine. The 460E is equipped with a purpose built ZF transmission that includes a high capacity retarder, eight forward gears and four reverse gears. In addition, the John Deere hauler axles are designed for heavy-duty applications and include on-the-fly differential locks, outboard planetaries and each axle is independently pressure lubed and filtered. The 460E’s axles use internal wet disc brakes that utilize independent cooling circuits. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
No DPF or DPF Maintenance
URABLE Optimized Premium Fuel Injection
ECHNOLOGICALLY ADVANCED Fine Tuning Tuning for Each Ea Application
ISUZU
Isuzu Motors America, LLC :: 46401 Commerce Center Drive, Plymouth MI 48170 :: 734.582.9470 :: www.IsuzuREDTech.com
Page 62 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Komatsu’s HD325-7 Dump Truck Increases Productivity Komatsu America Corp.’s HD325-7 is designed for sand and gravel and rock quarry sites. The truck increases productivity while lowering fuel consumption to provide a safer and more comfortable operator environment and offer improved durability and reliability, according to the manufacturer. The HD325-7 features a powerful, clean SAA6D140E-5 turbocharged, after-cooled diesel engine that provides a maximum net output of 498 hp (371 kW). This high performance engine is enhanced with an advanced cooling system and improved fuel prefilters. Komatsu’s rigid dump truck features environmentally friendly lead-free aluminum core radiators. To protect the environment, a tank is installed to recover brake cooling oil in the event of brake seal leakage. In addition, the truck also has reduced cab noise levels. The HD325-7 is equipped with the latest KOMTRAX technology, which sends machine operating information to a secure Web site utilizing wireless technology. Hour meter, location, cautions and maintenance alerts — to name a few of its features — are relayed to the Web application for analysis. The KOMTRAX fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor, and provides a wealth of other information to drive business efficiency and productivity. Special features of the rigid dump truck include: High Performance for Enhanced Productivity The truck’s performance engine delivers faster acceleration and higher travel speeds with high horsepower per ton. High torque at low speed, increased acceleration and low fuel-consumption ensure maximum productivity. The Komatsu designed electronically controlled countershaft transmission with K-ATOMiCS automatically selects the optimum gear according to vehicle speed, engine speed and the shift position chosen, resulting in the best gear for any operating condition, according to the manufacturer. The optional automatic retard speed control system (ARSC) with a large capacity retarder allows
The HD325-7 features a powerful, clean SAA6D140E-5 turbocharged, after-cooled diesel engine that provides a maximum net output of 498 hp (371 kW).
operators to set downhill travel speed at a constant level. Its cooling oil temperature is always monitored, so the speed is automatically lowered if the retarder oil temperature rises. Improved Cab Design Enhances Operator Comfort and Safety The HD325-7 is equipped with an ergonomically designed, cab that offers a quiet and comfortable operator environment. The wide spacious cab is mounted with Komatsu’s viscous mounts to keep noise at a minimum and provide a low-vibration, clean operating environment and the built-in ROPS/FOPS structure provides roll-over protection. Adoption of a low effort body dump control
lever makes dumping loads much easier. The secondary foot-operated brakes actuate the front disk brakes and parking brakes. In addition, when hydraulic pressure drops below the rated level, the parking brake is automatically activated. Durability and Reliability Provide Easy Maintenance Flat face-to-face O-ring seals are used to securely seal all hydraulic hose connections and prevent oil leakage. The main harnesses and controller connectors are equipped with sealed DT connectors to provide high reliability, and water and dust resistance. The truck’s fully hydraulic controlled wet multiple-disc brakes ensure reliable and stable
brake performance. The continuously cooled wet-multiple disc brakes also function as a highly responsive retarder, which gives the operator greater confidence at higher downhill travel speeds. Wet disc brakes are fully sealed to keep contaminants out, reducing wear and maintenance. Because the brakes don’t require adjustments for wear, maintenance is extremely low. The braking system is designed with added reliability with three independent hydraulic circuits that provide hydraulic back-up should one of the circuits fail. This system eliminates air bleeding so water condensation — which can lead to contamination, corrosion and freezing — also is eliminated. Both the service filters and
greasing points have been centralized for easier servicing. To minimize operating costs, oil change intervals also have been extended to 500 hours for engine oil and 4000 hours for hydraulic oil. Flange-type tire rims make removal and installation of the trucks’ tires easy. Komatsu’s advanced onboard diagnostic system maximizes machine production time by identifying maintenance items, reducing diagnostic times, indicating oil and filter replacement hours and displaying abnormality codes. For more information, visit www.komatsuamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 63
Four Seasons Equipment, Inc. 8111 Mills Rd. Houston, TX 77064 800-234-5007 Fax: 281-807-1233 Dallas, TX 866-270-1700
Lake Charles, LA 866-222-0053 Williston, ND 701-577-7014
www.fourseasons-equip.com
Heavy Equipment Rentals & Sales
13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.hers-llc.com
Orion Equipment
18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com
Page 64 • October 2, 2016 • www.constructionequipmentguide.com • Off-Road Trucks Section • Construction Equipment Guide
Construction Equipment Guide • Off-Road Trucks Section • www.constructionequipmentguide.com • October 2, 2016 • Page 65
Dyna-Flo Liners ®
By Mentor Dynamics Ltd.
Cut Carry-back in Articulated Haulers & Loader Buckets Increase Profits $$$$ Release Loads Quickly Reduce Carry-back Shorten Turn-around Time Haul More Loads Per Day
Available for all models Job Site Installation Available CAD Designed Liner Parts Pre-cut Replacement Parts Factory Trained Installers
MENTOR DYNAMICS LTD. 30 Years 35 Yearsof of Proven ProvenDependable Dependable Service Service 1-800-942-2648 www.MentorDynamics.com
NOW AVAILABLE IN HOUSTON:
WATER TRUCK REPLACEMENT PARTS Curry Supply is now stocking replacement parts for your On- and Off-Road Water Trucks at our Houston facility! Parts are available for most makes and models.
Only a sm sample all availab of le shown parts here!
Call to order or stop in! Walk-ins are welcome: Monday thru Friday, 7:30 am – 4:30 pm
24 Hour Houston Parts Hotline 832-821-7222 1113 Howard Avenue, Deer Park (Houston), TX 77536
www.CurrySupply.com
Page 66 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 1629 Vision Dr. Abilene, TX 79602 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977 3201 E Slaton Hwy. Lubbock, TX 79404 866/289-6087 7301 East I-20 Odessa, TX 877/794-1800 432/333-7000
© 2008 ESCO Corporation.
BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.
ASSOCIATED BUILDERS AND CONTRACTORS RECRUITING WITH SOCIAL MEDIA TOOLS DATE: WEDNESDAY, OCTOBER 12, 2016 TIME: 9:00 AM to 12:00 PM PLACE: East Norriton Main Office 430 W. Germantown Pike, East Norriton, PA 19403 COST: ABC Member $50 Non-Member $75 To sign up for this class, email: education@abceastpa.org. As a recruiter or a business manager, when you have a job opening, you want to find the most qualified, talented applicants. Our course will teach you that by utilizing social media as a recruiter, you have the opportunity to get to know your candidates through their public internet persona. As with any job opening, using social media recruiting requires time and effort; but is an investment in longer-term benefits for your company. Who Will Benefit? Business owners, managers, recruiters, and human resources personnel will benefit from learning in this seminar how to use social media as a recruitment tool. AGC of Michigan – CONFERENCE Associated General Contractors of America (AGC) HR & TRAINING PROFESSIONALS CONFERENCE DATES: WEDNESDAY, OCTOBER 5 thru FRIDAY, OCTOBER 7, 2016 PLACE: HYATT REGENCY HOTEL, CHICAGO, ILLINOIS CONTACT: AGC of AMERICA, 703/837-5352; www.agc.org STAFDA – Specialty Tools & Fasteners Distributors Association Welcome to STAFDA! STAFDA is an international educational association comprised of distributors, manufacturers, rep agents, and affiliates (trade press) serving the construction/industrial market. We have 2,500 members from across the globe and have been serving the Construction & Industrial Channel since 1976. UPCOMING EVENTS: STAFDA’s 40th Annual Convention & Trade Show Atlanta, GA November 6 – 8, 2016 Georgia World Congress Center Registration materials will be mailed to members the third week of June. You must be a member to attend! STAFDA has a series of training manuals, along with benchmarking surveys, and over 65 different programs to serve your needs! We encourage you to explore our website and learn more! STAFDA 500 Elm Grove Road – Suite 210 – P. O. Box 44 – Elm Grove, Wisconsin 53122 Phone: 800/352-2981 or 262/784-4774 Fax: 262/784-5059 Info@STAFDA.org ASSOCIATED GENERAL CONTRACTORS Federal Construction HR Workshop Chicago, Illinois DATE: WEDNESDAY, OCTOBER 5, 2016 https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS WebEd: Drone Series Part Two – The Federal Aviation Administration’s New “Rules of the Road” for the Commercial use of Drones DATE: WEDNESDAY, OCTOBER 5, 2016 – 2:00 PM to 3:00 PM TECHNOLOGY https://www.agc.org/connect/events-calendar
ASSOCIATED GENERAL CONTRACTORS AGC’s 2016 Contractors Environmental Conference Washington, District of Columbia DATES: WEDNESDAY, OCTOBER 5, 2016 to THURSDAY, OCTOBER 6, 2016 ENVIRONMENT https://www.agc.org/connect/events-calendar
Thursday, October 29: Data Modeling in the Age of Big Data If you register to become a Premium Member of TDWI at the time of your seminar registration, you can attend at TDWI Premium Member rates. Please contact us at 425/277-9201 or registration @tdwi.org. All non-member registrations for three or more days include a one-year TDWI Premium Membership. You may decline Premium Membership on the registration form.
ASSOCIATED GENERAL CONTRACTORS WebEd: What all Federal Contractors – Big and Small – Need to Know about the New SBA Mentor-Protégé Program & Other Small Business Changes DATE: THURSDAY, OCTOBER 6, 2016 – 2:00 PM to 3:30 PM CONTRACTS and CONSTRUCTION LAW https://www.agc.org/connect/events-calendar
Missouri Land Improvement Contractors MLICA Board of Directors and Committee Meetings DATE: SATURDAY, OCTOBER 22, 2016 LOCATION: Bobcat of St. Louis-Columbia 1101 North Lenway, Columbia, MO TIME: 10:00 AM For more information, contact Deb Dickens, Executive Director. Phone: 573/634-3001 Email: MLICA@aol.com
ASSOCIATED GENERAL CONTRACTORS Construction HR & Training Professionals Conference Chicago, Illinois DATES: WEDNESDAY, OCTOBER 5, 2016 to FRIDAY, OCTOBER 7, 2016 LABOR and HR https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS WebEd: Smarter Construction. Integrated Content Management for Field and Office DATE: TUESDAY, OCTOBER 18, 2016 – 2:00 PM to 3:00 PM TECHNOLOGY https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS Fall BIMForum DATES: MONDAY, OCTOBER 17, 2016 to WEDNESDAY, OCTOBER 19, 2016 BIM https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS AGC’s 2016 BuildCon Atlanta, GA DATES: TUESDAY, OCTOBER 18, 2016 to WEDNESDAY, OCTOBER 19, 2016 DIVISION and COMMITTEE MEETINGS https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS WebEd: Drone Series Part Four – Insurance Coverage for Drones and Risk Management Strategies for Outsourcing Their Operation and Use DATE: WEDNESDAY, OCTOBER 19, 2016 – 2:00 PM to 3:00 PM TECHNOLOGY https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS WebEd: Hiring and Retaining the Right People for Future Growth DATE: THURSDAY, OCTOBER 20, 2016 – 2:00 PM to 3:00 PM LABOR and HR https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS 2016 AGC/CFMA Construction Financial Management Conference Las Vegas, Nevada DATES: WEDNESDAY, OCTOBER 19, 2016 to FRIDAY, OCTOBER 21, 2016 FINANCIAL ISSUES https://www.agc.org/connect/events-calendar TDWI Seminar in New York 2016 New York//October 17-20, 2016 Modern Data Modeling Seminar Location: India House One Hanover Square • New York, NY 10004 Monday, October 17: Business Information and Modern BI: Balancing OLAP, Analytics, and Performance Management Tuesday, October 18: TDWI Dimensional Data Modeling Primer: From Requirements to Business Analysis Wednesday, October 19: Advanced Dimensional Modeling: Techniques for Practitioners
Ohio Forestry Association The Official Paul Bunyan Show WHEN: OCTOBER 7 – 9, 2016 8 AM to 5 PM FRIDAY and SATURDAY 9 AM to 3 PM SUNDAY Guernsey County Fairgrounds 335 Old National Road Old Washington (Cambridge), OH 43768 For more information on this event, please contact Ohio Forestry Association. Phone: 614/497-9580. Fax: 614/497-9581. E-Mail: info@ohioforest.org. Website: http://www.ohioforest.org. Michigan Construction News November 11 – 15, 2016 (Friday to Tuesday) American Association of State Highway & Transportation Officials, 2016 Annual Meeting, Westin Boston Waterfront Hotel, Boston, Massachusetts. Contact: AASHTO, 850/224-7775 AGC of Minnesota AGC of Minnesota Recognition Dinner (CHASE, SRI and Lifetime Achievement Awards) WHEN: THURSDAY, OCTOBER 13, 2016 WHERE: Saint Paul Hotel, Saint Paul, MN CONTACT: Denise Woods, dwoods@agcmn.org Phone: 651/796-2189 REGISTRATION IS AVAILABLE SEPTEMBER 2016. WORLD DEMOLITION SUMMIT 2016 . Demolition event moves to the USA for the first time . Online registration is now open for event, taking place on 14 October, 2016 . Deadline for entries to World Demolition Awards is 30 June, 2016 An international line-up of expert speakers has been confirmed for this year’s World Demolition Summit (WDS), which takes place in Miami, Florida on 14 October – its first time in the USA. The Summit, always previously held in Europe, is established as one of the major annual international events for the demolition industry. More information and online registration is available at the conference website: www.khl.com/wds. Companies are also encouraged to enter the 2016 World Demolition Awards, which are the most prestigious awards for the worldwide demolition industry, judged by a panel of independent experts. There are 11 categories and the awards are free to enter. The deadline for entries is Friday, 30 June. The entry forms can be downloaded from the event website at www.khl.com/wds. GIE+EXPO: The Green Industry & Equipment Expo Dealer Day: OCTOBER 19, 2016 All Attendees: OCTOBER 20-21, 2016 LOCATION: KENTUCKY EXPO CENTER TRADE SHOW EXHIBIT DESIGN – Design, fabrication, national & international logistics & management. Green Industry and Equipment Expo (GIE+EXPO) is the largest trade show for outdoor power equipment, lawn and garden equipment, light construction and landscape equipment, featuring new products, education and an outdoor demonstration area. This three (3) days green industry trade show is being organized by Interlocking Concrete Pavement Institute (ICPI). GIE+EXPO 2016 will showcase a wide range of products and services related to agriculture sector from the leading exhibitors such as lawn and garden products, outdoor leisure products, rental lines,
outdoor power equipment, design, build, plant care, turf. The event will accommodate approximately 500,000 square feet of exhibit space. Over 20,000 visitors are expected at this green industry trade show which will feature over 750 exhibitors. Visitor profile of this event includes buyers for municipalities, parks & recreation, design & build pros, distributors, equipment dealers, general contractors, golf course superintendents & equipment managers, grounds managers, interior plant scrapers, international importers, irrigation experts, lawn & garden centers, lawn & landscape professionals, merchandisers, buyers, oem engineers, plant care pros, rental dealers, retailers, turf care experts, trade & national consumer media. The GIE+EXPO is an annual event. Future Show Dates: October 18-20, 2017: October 17-19, 2018: October 16-18, 2019. For more information on this event, contact info@gie-expo.com; Phone: 800/5588767; 812/949-9200. Fax: 812/949-9600. Visit https://tradeshowz.com/gieexpo. AWWA Water Infrastructure Conference & Exhibition, Phoenix, AZ, American Water Works Association DATES: Sunday, OCTOBER 30, 2016 to Wednesday, NOVEMBER 2, 2016 LOCATION: Phoenix, AZ Booth: 301 AWWA Water Infrastructure Conference 2016 It’s time to solve America’s water infrastructure challenges! The Water Infrastructure Conference & Exposition is AWWA’s newest conference, and this year’s focus will be on addressing water infrastructure planning and reinvestment strategies, critical infrastructure protection through comprehensive emergency preparedness efforts, and enhanced security measures. Copperleaf is excited to be attending this brand new event. For more information: http://www.copperleaf.com/news/events/awwa-waterinfrastructure-conference-2016/. North American Crane Bureau, Inc. (NACB, Inc.) LIFTING & LOAD HANDLING TRAINING EXPO DATES: OCTOBER 17th – 20th, 2016 WHERE: ORLANDO MARRIOTT LAKE MARY, ORLANDO, FLORIDA Changes are constantly happening in our industry. New federal regulations and ASME standards are written, safety gear is modified and tools of our trade are continually updated. However, you can stay on top of the crane and lifting world by spending a valuable time at our 2016 Lifting and Load Handling Training Expo. Who should attend? • Safety Managers • Lift Directors • EHS Managers • Plant Managers • Lift Planners • Riggers • Risk Managers • Crane Operators NACB Professionalism, quality and integrity - Worldwide Innovators in Lifting & Load Handling Solutions. Find out More! Call Toll Free: 800/654-5640 or Fax: 407/869-8778 for more information! You can also go to www.cranesafe.com. AGC (Associated General Contractors) of Minnesota DATE: WEDNESDAY, NOVEMBER 30, 3016 EVENT: Member Business Meeting/Holiday Reception PLACE: HEARTLAND RESTAURANT, ST. PAUL, MINNESOTA TIME: 5:00 PM to 7:30 PM AGC Contact: Denise Woods at AGC of Minnesota, 525 Park Street, #110, St. Paul, Minnesota 55102. Telephone: 651/632-8929 Fax: 651/632-8928 Email: info@agcmn.org Concrete Sawing & Drilling Association (CSDA) to Meet in Puerto Rico for the First Time CSDA is heading to beautiful Puerto Rico for the association’s 45th Annual Convention & Tech Fair. Dates: March 14-18, 2017 Puerto Rico is an ideal location for industry professionals to meet, network and relax – a tropical island paradise that remains part of the U.S. and is easily accessible for American and international travelers. CSDA has chosen the luxurious Gran Melia Resort as the convention venue – a highly sophisticated architectural gem nestled on Puerto Rico’s northeastern coast in Coco Beach, Rio Grande. The CSDA Annual Convention is attended by owners, managers and operators from concrete cutting, polishing and imaging companies as well as representatives from manufacturers and distributors who support the industry with products and services. Anyone who falls into these categories should join CSDA for this important networking event. Registration opens September. For more information, visit www.csda.org/convention, call 727/5775004 or email info@csda.org.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 67
Pros P Pr ros r os Know! K Kno no ow! w!
®
Those in the know, know Takeuchi
Tough, Powerful, Dependable
POWER MOTIVE CORPORATION
DITCH WITCH OF EAST TEXAS
DITCH WITCH OF ARIZONA
www.powermotivecorp.com
www.witchequipment.net 7809 Hwy. 271 Tyler, TX 75708 903-592-6226 Fax: 903-535-9768
www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351
DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900
Milliken 970-587-1188
Colorado Springs 719-576-5541
Cheyenne 307-634-5149
Grand Junction 970-241-1550
Durango 970-259-0455
Tucson, AZ 520-579-0261
TRI-WEST TRACTOR www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200 Fax: 925-455-8220
WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 South Main St. Houston, TX 77035 713-551-0506 Fax: 713-551-0798
Corpus Christi, TX 361-884-8275
Edinburg, TX 956-386-0107
San Antonio, TX 210-648-4444
Austin, TX 512-251-0013
Tomball, TX 281-351-9016
Beaumont, TX 409-721-5305
Buffalo, TX 903-322-7150
< Find out what others know, visit takeuchi-us.com for more info >
Page 68 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Honnen Equipment Elects Jon Asbury Vice President
Hlavinka JCB 7105 Hwy. 59 N. Victoria, TX 77905 361-541-6100
Honnen Equipment announced that Jon Asbury was elected vice president at a recent shareholder’s meeting. Asbury has 18 years total heavy equipment industry experience and oversees all sales operations for the used, Wirtgen and Manitowoc divisions. Asbury began his career with Honnen as a territory manager in 2004 and became the asphalt division sales manager (Wirtgen Group) in 2009. Since then Asbury’s sales management responsibilities have been increasing and broadening to include the used sales division and the Manitowoc Crane sales division as well. Honnen Equipment is the authorized dealer of John Deere Construction & Forestry Equipment in the Rocky Mountain Region. It is their mission to partner with their customers to provide value through the lowest owning and operating costs. Honnen Equipment provide parts, sales, service and rentals as well as customer support and technology solutions for today’s heavy equipment. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipJon Asbury mentguide.com.)
New Mexico’s Peralta Roadway Project Due to Complete This Fall IMPROVEMENTS from page 32
Noise and air quality also are being closely monitored throughout the project. Business as Usual … Sort of Another type of challenge is business and residence access during construction. During the design phase, the design team held two public information meetings as well as three property owner workshops, Bell said. In addition, she added, “The prime contractor communicates with the businesses and residents, letting them know that access will be disturbed and let them know the route that is designated for them. “The traffic pattern set up for motorists on the first day of construction reduced the roadway from two to one northbound and one southbound lane, but added a center turn lane that did not exist before,” Bell continued. Traffic was shifted to the east side of the road so crews could begin constructing a temporary asphalt roadway on the west side of the roadway. This allowed commuters access throughout the work zone throughout the entire project without the need for road closures. The next traffic pattern shifted traffic to the west side of the road, and then back to the east as crews constructed the permanent roadway. Because motorists are not accustomed to having their
Work is expected to be complete by fall 2016.
highway become a work zone, Bell said speeds through the corridor have been an issue. “The Los Lunas law enforcement have assisted crews by having an officer during work hours [to monitor] speeds and, as a result, has made the corridor safer for everyone,” she said. Within the first month they issued 23 speeding citations and 10 written warnings. NMDOT is hoping that drivers slow down and locals are hoping construction speeds up. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Angleton, TX 979-308-6870 www.hlavinkajcb.com
Lubbock, TX 806-745-2000 Wichita Falls, TX 940-687-2726 Odessa, TX 432-337-2823 Amarillo, TX 806-372-8386 Midland, TX 432-685-9999 Clovis, NM 575-742-2726 www.ascoeq.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 69
SSEIZZE THE SEIZE T WORKDA WORKDAY WORKD W DA AY Y Contact your local JCB dealer for details on zero percent financing and cash back offers!
Don’t just survive the workday—conquer it with power and performance found in our latest backhoes. In every respect – from digging to lifting and maneuvering – these machines will maximize your productivity. With a tier 4 f inal solution, 109 9 HP P, a top speed of 26 MPH and a loader bucket breakout force of 14,528 lbs, your job on the worksite justt got easierr.. T To o learn more visit JCBNA.com today.
/JCBNA JCBNA
ADOBE
DARR Dallas, TX 214-819-3991 Longview, TX 800-245-7702 Waco, TX 800-245-7706
@JCBNA JCBNA www ww w.jcbna.com
Texarkana, TX 888-327-7370 Tulsa, OK 866-402-4248 Oklahoma City, OK 800-245-7585 www.darrjcb.com
Houston, TX 713-692-4471 Beaumont, TX 409-898-8700 www.adobejcb.com
2240 W. Buckeye Rd. Phoenix, AZ 85009 602-761-2525 Fax: 602-454-8899 www.flaskajcb.com
ProCon JCB 461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON www.procon-supply.com
4245
Page 70 • October 2, 2016 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide
Call me toda today, ayy, I’ll I’l be glad to help yyou! ou! ~ K Kevin evin
» The #1 Selling Rubber R Track Track Brand Brrand and In n America! »
800-365-7260 » depparts depparts.com .com
REPL ACEMENT REPLACEMENT UNDE RCARRIAGE UNDERCARRIAGE Morooka,® Bobcat,® Gehl,® Mustang,® Takeuchi, hi,® ® CAT 279, 289 & 299
Ashland, VA VA » JJacksonville, acksonville, FL » Dallas, TX » Cincinnati, OH » P Portland,OR ortland,OR » Sacramento, Sacramento, CA » Schenectady, Schenectady y,, NY » Leduc, AB
Since
NEW, USED & REMAN PARTS • • • • • • • •
Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!
www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com
1985!
LBX Welcomes Back DLL LBX Company LLC (LBX) announced its renewed relationship with DLL as a preferred financing partner throughout North America. DLL has a longstanding history with LBX and its dealer network, having provided comprehensive retail and wholesale financing support dating back to 2003. The program officially launched in the United States on Aug. 4 and is expected to kick off in Canada on Sept. 1, 2016. With more than 35 years of vendor finance experience backed by a commitment to dealer service, DLL provides flexible financial solutions to loyal customers around the globe. DLL will be fully engaged with LBX to ensure unique and tailored financial solutions are provided to LBX dealers and their customers. “DLL was our exclusive finance partner prior to the launch of Sumitomo Mitsui Finance and Leasing Company (SMFL). DLL established and continued to maintain strong retail and wholesale relationships with our dealers,” said Eric Sauvage, president and chief executive officer of LBX. “By once again having DLL as a preferred financing partner, we will be able to offer an even more robust finance program throughout North America.”
“We are pleased to be partnering with LBX again,” said Rod Versteegh, president, CT&I Global Business Unit, DLL. “The relationship between our organizations dates back more than thirteen years and is based on a shared vision and a collaborative approach to business. DLL has a strong global footprint, and we look forward to helping LBX expand into Latin America.” To mark the start of a renewed relationship, LBX and DLL are offering two great deals on two great machines. Now through Oct. 31, 2016, customers can lease a new Link-Belt 210 X3 for 48 monthly payments as low as $1,985 or a Link-Belt 145 X3 LC for as low as $1,488. This offer includes a 42 in. (107 cm) or 36 in. (91.4 cm) Esco bucket; five years of RemoteCARE telematics; and a fouryear/5,000-hour extended powertrain warranty. A 36-month lease also is available. Terms and conditions apply. For more information, visit http://lbxco.com/dll-lease-offer.asp. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 71
Bobcat of Sacramento
Blaine Equipment Company, Inc.
Ditch Witch of Arizona
www.bigvalleytractor.com Sacramento, CA 800-266-9631
www.blaineequipment.com Las Vegas, NV 702-399-2700
ditchwitchaz.com Phoenix, AZ 602-437-0351 Tucson, AZ 520-579-0261
Peterson Cat
Bobcat of Seattle
www.petersoncat.com Eugene, OR 503-910-0113
www.bobcatpnw.com Seattle, WA 253-850-8140
Craig Taylor Equipment www.craigtaylorequipment.com Anchorage, AK 800-279-5051
Honnen Equipment www.honnen.com Salt Lake City, UT 801-262-7441 Denver, CO 303-287-7506
Coastline Equipment www.coastlineequipment.com Long Beach, CA 562-272-7400
Page 72 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 20-21 DH Call McLaren 888-492-4230
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 20-21 DH Call McLaren 888-492-4230
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 20-21 DH Call McLaren 888-492-4230
Serving the Construction Industry Since 1989 Trench Shoring - Confined Space - Pipe Plugs Rentals - Sales - Service 20-21 PK 800-828-8505
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $115 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. “TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of HighQuality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call
Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.
For more information, call Construction Equipment Guide today at
Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 19-20 TM
800/523-2200
CLASSIFIEDS CrAWLer trACtors Crawler tractors 2006 John Deere 450J LgP, EROPS, A/C, Sweeps, 6 way blade, Rear & side screens, FM Stereo, 24'' pads, 1,549 hours ..................................$52,500. Hendrix Machinery, LLC 1-936-327-5430
eXCAVAtors Hydraulic excavators 2012 Kobelco sK140, exvcellent condition, 3,000 hours ...... ..................................$76,000. gibson Machinery, LLC 440-439-4000 Daewoo solar 280, s/n 5373, Hyd. QC, bucket, Excavator in excellent running condition, 5,400 hours................$22,500.
Daewoo solar 280, s/n 5373, Hyd. QC, bucket, good condition, 5,600 hrs. ..........$17,500.
2007 terex tXC300, s/n 40017, Generator, Cab, 3x2 Grapple, Good condition, 5,300 hours..........................$90,000.
gibson Machinery, LLC 440-439-4000
gibson Machinery 440-439-4000
Mini excavators
Motor grADers
2013 Bobcat e80, EROPS, AC, 36''Quick connect bucket, Hyd. thumb, 7'7'' push blade, 18'' rubber tracks, 1,849 hours. ......................................CALL.
graders
Hendrix Machinery, LLC 1-936-327-5430 2015 Doosan DX63 mini excavator, Hyd QC & 2 buckets, excellent/new condition, 50 hours..........................$85,000. gibson Machinery, LLC 440-439-4000
MAterIAL HAnDLers Material Handlers
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 20-21 EB
1995 galion 850, Tall Cab, 13' Blade, 17.50 tires, AWD, Aux. Hydr., Snow Wing, 2,900 hours ..................................$34,900. Brooks tractor Inc. Call John reinen 608-220-1723
trUCKs
Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 ®
Would you like
YOUR COMPANY featured in Construction Equipment Guide? If so, please contact us:
off-road trucks
DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL? Construction Equipment Guide is THE Place to List It!
ONLY
$40
2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.
You must have a classified print ad to do so.
Call 800-523-2200
or go online to place your ad
2003 Komatsu HM300, EROPS, A/C, 23.5 x 25 Tires, 6 Cyl. Komatsu engine, 38,419 miles, 10,817 hrs ......$56,500.
470 Maryland Drive,
Hendrix Machinery, LLC 1-936-327-5430
PA 19034
Fort Washington,
www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 73
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: 24.00-29 TIRES LOOKING FOR 2 24.00-29 TIRES FOR CAT 80 SCRAPER CONTACT: DEAN JOHNSON (PH: 612-759-9491) EMAIL: DEANAJOHNSONINC@GMAIL.COM FAX: 218-945-6511 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER D11T CD «2« BULLDOZER D11T CD «OR CARRIAGE DOZER ONLY« WITH RIPPER UNDER 8000 HOURS FOR BIG JOB NOT ADVERTISED PLEASE ONLY CARRIAGE DOZER 2013AND UP CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CASE 450 CRAWLER COMPLETE STONE GUARDS LOOKING FOR USED SET OF BOTTOM ROCK GUARDS FOR 450 CASE CRAWLER LOADER SER.NO. 3062213 CONTACT: ROGER (PH: 5706393058) EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED: VSI CRUSHER PORTABLE OR STATIONARY BARMAC OR REMCO VSI CONTACT: JOE (PH: 724-944-5569) EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED: JENBACHER GAS GENERATOR JENBACHER GAS GENERATOR 1400 KW 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON (PH: 864-574-0404) EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: CAT MOTOR GRADER 140G ORIGINAL PAINT, NO CRACKS OR WELDS, MUST HAVE RIPPER CONTACT: WASIM KHAN (PH: 832-533-1929) EMAIL: MWASIEM@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: USED GENERATORS USED DIESEL GENERATORS RÉNTAL TRAILER AND STANDBY CONTACT: FELUX (PH: 786 603 3060) EMAIL: EQUIPSALES2016@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: DYNAPAC ROLLER CA 251D, 301D, CA262D, AND CA362D CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 8325280786 –––––––––––––––––––––––––––––––– WANTED: CAT HYDRAULIC PULL TYPE SCRAPER WANTED CAT 463 SCRAPER CONVERTED TO HYDRAULIC CONTACT: GEHRING GROUP INC (PH: 513-582-3874) EMAIL: GEHRINGGROUP@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED: RUNNING OR NON RUNNING MACHINES!!!! 1) CAT WHEEL LOADERS: 920, 930,936 E/F, 950 B/E/F, 966 C/D/E/F/G/H 970F, 972G, 980G. 2) CAT MOTOR GRADER: 140G, 14G, 140H AND 14H. 3) CAT DOZER: D9R, D9N, D10N AND D10R. WITH RIPPER 4) CAT EXCAVATOR: 225D, 235 C/D AND 330BL. 5) HITACHI EXCAVATOR: EX200, EX200-1, EX400 AND EX400-1 6) JOHN DEERE EXCAVATOR: 595D 7) DYNAPAC ROLLER: CA251D, CA301D, CA262D AND CA362D IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 8325280786 –––––––––––––––––––––––––––––––– WANTED: WANTED TO BUY CATERPILLAR 140G , 140H RUNNING OR NON RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: TO BUY EQUIPMENT MANUALS. WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES). WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: 953C OR SAME SIZE NEEDED LOADER 953C OR 953D OR JOHN DEERE 2010AND UP LOW HOURS USER USER USA CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: BELLY DUMPS I'M LOOKING FOR ALL MAKES AND SIZES OF BELLY DUMPS ASAP! WE WILL PAY CASH ON THE SPOT CONTACT: ROBERT BAKER (PH: 480-744-4008) EMAIL: RBAKER.WESTCOAST@OUTLOOK.COM FAX: 480-744-4008 ––––––––––––––––––––––––––––––––
WANTED: 4 N 1 LOADER BUCKET LOOKING FOR A 4 N 1 LOADER BUCKET TO FIT ON A 2007 CASE 570 MXT CONTACT: RON WILLINGHAM (PH: 5806499524) EMAIL: WILLINGHAM@SWBELL.NET –––––––––––––––––––––––––––––––– WANTED: WANTED HEAVY EQUIPMENT FORKLIFTS BOBCATS SKIP LOADERS WHEEL LOADERS BOX TRUCKS CONSTRUCTION EQUIPMENT LANDSCAPING EQUIPMENT CHIPPERS ALL TYPES OF HEAVY EQUIPMENT LOCATED IN CALIFORNIA OR SURROUNDING AREAS. PACIFIC EQUIPMENT CO. OR GO TO PACIFICEQUIPMENT.ORG CONTACT: WALTER (PH: 714-818-4136) EMAIL: PACIFIC-EQUIPMENT@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D8T UNDER 3500 HOURS NEED BULLDOZER D8T ENC CAB WITH UNDER 3500 HOURS 2012 AND UP WITH U BLADES OR SEMI U WITH RIPPER WITH EPA NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: MANITOU 2150 MANITOU 2150, UNDER 2005 - 2009, UNDER MAX 3000 HOURS. THANKS CONTACT: CONSTR. EQUIP. BROKER EMAIL: INFO@CEBROKER.ES –––––––––––––––––––––––––––––––– WANTED: WARTSILA HFO WARTSILA HFO ELECTRICAL GENERATOR 5 TO 6 MW. CAN BE ONE OR SEVERAL UNITS ADDING UP TO 8 MW. MUST BE 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON (PH: 864-574-0404) EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: 450C JOHN DEERE DOZER WITH BACKHOE 450C OR 550C OR NEWER 6 WAY DOZER WITH BACKHOE ATTACHMENT CONTACT: BUTCH KELLER (PH: 970 749 6920) EMAIL: BUTCHANDKAREN@LIVE.COM –––––––––––––––––––––––––––––––– WANTED: CATALYTIC CONVERTERS. WE BUY COMMERCIAL CATALYTIC CONVERTER'S AND PAY TOP DOLLAR ON THE SPOT. BRANDS WE BUY: DODGE, FORD, CAT, FREIGHTLINER, PETERBILT, KENWORTH, MAC, ETC. WE CAN PAY $50-$175 EACH CONTACT: JOHN FORD PH: 814-779-9208 EMAIL: KCANON.ERS@OUTLOOK.COM FAX: 814-779-9208 –––––––––––––––––––––––––––––––– WANTED: CAT 79U D3 ENGINE LOOKING TO BUY A COMPLETE ENGINE OR BLOCK ONLY FOR A CAT D3 79U ENGINE SERIAL #45V9767 ENGINE ARRANGEMENT #4N169 CONTACT: PATRICK PH: 901-205-8305 EMAIL: PMAN287@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED: CONSTRUCTION & AG MANUALS NEW OR USED BUYING NEW OR USED CONSTRUCTION AND AGRICULTURE SERVICE, PARTS AND OPERATOR MANUALS. EQUIPMENT DEALERS & PRIVATE COMPANIES, IF YOU HAVE MANUALS , AND YOU NO LONGER NEED THEM PLEASE GIVE ME A CALL OR EMAIL. I BUY LARGE & SMALL LOTS. JOHN DEERE, CAT, KOMATSU, CASE, NEW HOLLAND, VOLVO, DOOSAN AND SO ON. CONTACT: JOHN WHITNEY PH: 5308640771 EMAIL: WHITNEYJ65@YAHOO.COM FAX: 5308640771 –––––––––––––––––––––––––––––––– WANTED: N-2926 GENERATING PLANT TOTAL 60 MW. PREFER WITH FOUR 15 MW GAS UNITS 50 HZ. CAN BE NEW OR USED. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. WANTED: KENWORTH RIGS ASAP! I AM CONTACT: VICTOR LEBRON LOOKING FOR A SINGLE OR FLEET OF PH: 864-574-0404 EMAIL: APESALES@ KENWORTH RIGS, W900, OR IN THAT AMERICANPLANTANDEQUIPMENT.COM SERIES, WITH SLEEPERS, LOW FAX: 864-576-7204 MILEAGE, IN GOOD RUNNING CONDI–––––––––––––––––––––––––––––––– TION. NOTE: PLEASE NO DEALERS I WANTED: BULLDOZER D11T AM A SERIOUS BUYER I WILL BUY BULLDOZER D11T ENC CAB WITH RIPANYWHERE IN THE U.S. PER BETWEEN 2000 AND 3000 HOURS. CONTACT: JEAN MAURICE BOUTIN CONTACT: JOHN FORD PH: 1 450 346 8975 OR 1 514 386 8975 PH: 814-779-9208 EMAIL: EMAIL: KANIN.ERS@OUTLOOK.COM JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: BULLDOZER KOMATSU WANTED: FINAL DRIVE, 120B CAT P/N 355WITH RIPPERS. NEED BULLDOZER 1R5123 «3« KOMATSU 355 WITH RIPPER ONLY CONTACT: WAYNE NEAR GEORGIA OR NEW YORK FROM PH: 912-682-4536 CONTRACTORS ONLY NOT ADVEREMAIL: DRYBRANCHVILLAGE@GMAIL.COM TISED MUST BE CLEAR PLEASE. FAX: 912-239-5594 CONTACT: JEAN MAURICE BOUTIN –––––––––––––––––––––––––––––––– PH: 1-450-346-8975 OR 1-514-386-8975 WANTED: BULLDOZER D6MXL WITH EMAIL: UNDER 6000 HOURS ONLY I JEANMAURICEBOUTIN@VIDEOTRON.CA RIPPER NEED 2 NOT ADVERTISED USER NEAR –––––––––––––––––––––––––––––––– NEW YORK UNDER 25000US NO JUNK WANTED: CAT 773F, CAT 772 AND CAT CONTACT: JEAN MAURICE BOUTIN 770 ROCK TRUCKS. WE ARE LOOKING PH: 1-450-346-8975 OR 1-514-386-8975 TO PURCHASE IMMEDIATELY: CAT EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA 773F, CAT 772 AND CAT 770 ROCK –––––––––––––––––––––––––––––––– TRUCKS, 2006 TO 2013 MODELS WITH WANTED: DEERE 644K WHEEL LESS THAN 12,000 HOURS, WELL MAINTAINED WITH RECORDS, QUANTI- LOADER 4 YD GENERAL PURPOSE BUCKET TY NEEDED: 2 TO 4 CONTACT: FRANK @ GROFF TRACTOR CONTACT: MARK OR JOHN PH: 800-33-GROFF PH: 519-686-1123 EMAIL: FRANKHORAN@ EMAIL: GROFFTRACTOR.COM SALES@MARCELEQUIPMENT.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: NEEDED: CHALLENGER 865 WANTED: ENCLOSED CAB FOR OR 875 UNDER 4000 HRS GALION 503L I AM LOOKING FOR AN ENCLOSED CAB CONTACT: GREG MARTIN EMAIL: MACHINERYMART@ FOR GALION 503L ROAD GRADER, MIDOHIO.TWCBC.COM THAT I CAN INSTALL AIR –––––––––––––––––––––––––––––––– CONDITIONING IN WANTED: KOMATSU HD 1500 CONTACT: RICHARD NEED FRONT WHEEL LH - RH FOR A PH: 817-219-2521 LEAVE MESSAGE KOMATSU HD 1500 OFF HIGHWAY EMAIL: LINDALOUK@HUGHES.NET TRUCK. FRONT SUSPENSION/SPINDLE –––––––––––––––––––––––––––––––– + BRAKE ASSEMBLY + WHEEL HUB WANTED: CASE 850D ASSEMBLY LOOKING FOR LOW HRS.CASE 850D CONTACT: ORIEL BASTIDA PREFERABLY WITH A WINCH PH: 005114512562 CONTACT: JAMES HOPKINS EMAIL: ORIEL@CCI.PE EMAIL: MTRAY10@GMAIL.COM FAX: 005114519923 –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––
WANTED: PEGSON XA / XR 400 TRACK JAW CRUSHER LATER MODEL, LOW HOUR EAST COAST LOCATION PREFERED CONTACT: RICHARD 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: YANMAR Y10W OR Y10W-1 ANY CONDITION RUNNING OR NOT RUNNING OR FOR PARTS ONLY. CONTACT: GEORGE VARSHOCK PH: 619-933-7806 EMAIL: GVARSHOCK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: WE ARE LOOKING TO PURCHASE CAT 950 , WELL MAINTAINED ORIGINAL PAINT YEAR 1975-UP IMMEDIATE PURCHASE CONTACT: DAW ELGHABER PH: 407-926-0351 EMAIL: INFO@GCIGROUPLLC.COM FAX: 407-926-0351 –––––––––––––––––––––––––––––––– WANTED: EXCAVATOR CAT 345CLC BETWEEN 6000 - 7000 HOURS. NO PAST REAL HOURS ON THE FRAME AND METER NEAR NEW YORK. ONLY CONTRACTORS NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADERS AND MOTOR GRADER WE ARE LOOKING TO BUY BELOW MACHINES. CAT WHEEL LOADER 936E, 950B, 950E, 966D, 966F, 966H, 972G AND 970F. CAT MOTOR GRADER: 140G, 140H AND 14H I BUY RUNNING OR NON RUNNING MACHINE. PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA PH: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 ––––––––––––––––––––––––––––––––
Page 74 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Rochester, NY Fri., October 7, 2016 For: Construction Equipment • Manchester, NH Sat., October 8, 2016 For: Construction Equipment & more
For: Rental Equipment • Albany (Greenwich), NY Fri., December 30, 2016 For: Final Auction of Year – Late Model Construction Equipment • Long Island, NY Sat., January 7, 2017 For: Late Model Construction Equipment & more
Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• Syracuse, NY Sun., January 8, 2017 For: Light Construction Equipment & more • 24th Annual Florida Auction January 28 – February 5, 2017 Where the Best Equipment is the Norm, not the Exception!
DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768
J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE
AL: 334-693-2540
• Verona, KY Thurs., October 6, 2016 For: Heavy Vehicles & Equipment
• Chicago (Frankfort), IL Sat., October 15, 2016 For: Snow Extravaganza Phase 3
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631
EURO AUCTIONS USA www.euroauctions.com 770-683-3883
• South Beloit, IL Sat., October 22, 2016 For: Heavy Vehicles & Equipment
• Manchester, NH Fri., October 21, 2016 For: Construction Equipment
• Chicago, IL Thurs., October 6, 2016
• Atlanta, GA Wed., October 26, 2016 For: Construction Equipment
• Kansas City, MO Thurs., October 27, 2016 For: Heavy Vehicles & Equipment
• Houston (Tomball), TX Thurs., October 13, 2016 For: Nice Late Model Earth Moving Equipment • Livingston, TX Fri., October 14, 2016 For: Special Large Rental Construction Equipment & more
• Queretaro, Mexico Fri., October 21, 2016 For: Late Model Earth Moving Equipment & more • Rochester (Dansville), NY Sat., October 22, 2016 For: Large Municipal Cat & JD Construction Equipment & more • Amarillo, TX Thurs., October 27, 2016 For: Large Municipal Construction Equipment & more • Kissimmee, FL Fri., October 28, 2016 For: Rental Return Late Model Equipment
• Wasilla, AK Sat., October 8, 2016 • Artesia, NM Tues., October 11, 2016 • Manchester, NH Tues., October 11, 2016 • Eckhart Mines, MD Thurs., October 13, 2016 • Denver, CO Thurs., October 13, 2016 • Lexington, KY Tues., October 18, 2016 • Chehalis, WA Fri., October 21, 2016
• West Palm Beach, FL Sat., October 29, 2016 For: Rental Fleet Equipment – One Owner
• North East, MD Tues., October 25, 2016
• Boston (Plymouth), MA Sat., November 5, 2016 For: Late Model Snow Equipment
• Houston, TX November 9-10, 2016
• Houston, TX Tues., November 8, 2016 For: Late Model Construction Equipment & more • Augusta, ME Sat., November 12, 2016 For: Construction Equipment • Wooster, OH Fri., November 18, 2016 For: Rental Fleet Equipment • Attleboro, MA Sat., November 19, 2016 For: Construction Equipment
• Orlando, FL Thurs., October 27, 2016
• Williston, ND Tues., November 15, 2016 • Phoenix, AZ Wed., November 16, 2016
HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493
• ONLINE ONLY Sept. 28 – October 5, 2016 For: Kenmore Equipment & Vehicles
• Marietta, PA Fri., October 14, 2016 For: Truck, Trailer & Equipment
• Kamiah, ID October 12 - 13, 2016 For: Sawmill Equipment & Rolling Stock
• Marietta, PA Fri., December 9, 2016 For: Truck, Trailer & Equipment
• Warm Springs, OR November 16 - 17, 2016 For: Sawmill Equipment
• ONLINE ONLY October 12, 2016
• Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles
• ONLINE ONLY October 26, 2016
• Williston, ND Fri., December 2, 2016
• ONLINE ONLY December 14, 2016
• Sacramento, CA Tues., December 6, 2016
• ONLINE ONLY December 28, 2016
• Johnstown, PA Wed., November 30, 2016 For: Construction Equipment, Trucks, Trailers & more
• ONLINE ONLY October 5, 2016
• Boston, MA Fri., December 2, 2016 For: One Owner Liquidation
• ONLINE ONLY October 19, 2016
• ONLINE ONLY October 12, 2016
• ONLINE ONLY October 26, 2016 • ONLINE ONLY November 2, 2016
• Las Vegas, NV Sat., December 10, 2016 For: Large Job Completion & Rental Returns
• ONLINE ONLY November 16, 2016
• Manassas, VA Fri., December 16, 2016 For: Late Model Construction Equipment & more
DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., December 3, 2016 For: Construction Equipment
• Cave Junction, OR November 2 - 3, 2016 For: Public Auction - Rough & Ready Lumber, LLC
HOUSBY AUCTIONS www.housby.com 866-218-6266
• ONLINE ONLY November 30, 2016
• Canastota, NY Sat., November 26, 2016 For: Late Model Rental Fleet
• Shrewsbury, MA Sat., October 29, 2016 For: Heavy Vehicles & Equipment JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008
• Pittsburgh, PA Thurs., November 17, 2016
BIG IRON AUCTIONS www.bigiron.com 800-937-3558
• Dallas, TX Thurs., October 13, 2016 For: Heavy Vehicles & Equipment
• Livingston, LA November 2 - 3, 2016 For: 2 Day Fall Auction
• ONLINE ONLY November 9, 2016
• Albuquerque, NM Tues., December 13, 2016
• Atlantic City, NJ Sat., December 17, 2016
HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252
• Tipton, CA Thurs., November 17, 2016
• Woodstock, Ontario November 21 - 22, 2016 For: 2 Day Very Large Agricultural & Construction Equipment Auction
• Vienna, WV Fri., December 9, 2016 For: Trucks, Construction & Oil Field Equipment
• Philadelphia, MS November 16 - 17, 2016 For: Huge 2-Day Public Auction
HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Tarentum, PA October 19, 2016 For: Absolute Auction for Joseph B. Fay Company • Cadiz, OH Wed., November 2, 2016 For: Absolute Complete Liquidation Anthony Mining Company I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., December 2, 2016 For: Heavy Equipment IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Kissimmee, FL February 13 – 17, 2017 For: Unreserved Public Auction – Leading Equipment Brands
JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY October 3 - 12, 2016 For: Farm Implement Public Auction • ONLINE ONLY October 3 - 18, 2016 For: Construction Equipment, Trailers & Heavy Trucks • Semmes, AL Sat., October 15, 2016 For: Absolute South AL Seized Vehicle & Equipment Auction • Brooklyn, MS November 11 - 12, 2016 For: Construction & Farm Equipment, Heavy Trucks & more JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Blairsville, GA Sat., October 22, 2016 For: Job Completion & Fleet Reduction Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • ONLINE ONLY Wed., October 5, 2016 For: One Owner Absolute Auction
• Greenville, SC Sat., November 19, 2016 For: One Owner Absolute Retirement Auction McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., October 11, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., November 8, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., December 13, 2016 For: Tractor, Farm & Construction Equipment MOTLEYS ASSET DISPOSITION GROUP www.motleys.com 1-877-MOTLEYS • Richmond, VA Tues., October 4, 2016 For: Construction Equipment & Trucks • Gastonia, NC Sat., October 29, 2016 For: Utility Equipment & Trucks NITKE AUCTIONS www.nitkeauctions.com 715-693-4447 • Wausau, WI October 28 - 29, 2016 For: Wisconsin Contractors 51st Annual Auction NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322 • ONLINE ONLY Wed., October 5, 2016 For: Virtual Online – Truck & Equipment Auction • Concord, NH Sat., October 15, 2016 For: Absolute Inventory Reduction for E.W. Sleeper PENNDOT SALE www.auctionsbygov.com 866-469-7383 • Cheswick, PA Tues., October 11, 2016 For: Fall Heavy Equipment Auction PETROWSKY AUCTIONEERS A Ritchie Bros. Company www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT October 28 - 29, 2016 For: 2 Day Heavy Equipment & Truck Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., October 13, 2016 For: Construction Equipment • ONLINE ONLY Wed., October 19, 2016 For: Kansas Department of Transportation Auction • ONLINE ONLY Thurs., October 20, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., October 27, 2016 For: Construction Equipment
RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • ONLINE ONLY October 4 - 11, 2016 For: Construction Equipment • Lebanon, TN Sat., December 3, 2016 For: Construction Equipment ROBERT H. CLINTON & COMPANY, INC. www.rhclintonauction.com 610-847-5432 • Berwyn, PA Sat., October 8, 2016 For: Complete Liquidation W.H. Fritz, Inc. Lumber Yard • Flandes (Roxbury Twp), NJ Sat., October 22, 2016 For: Public Auction – George Mohr Excavating, LLS ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., November 9, 2016 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Rochester, NY Sat., October 15, 2016 For: Landscape Equipment Auction UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., October 28, 2016 For: Construction, Utility & Forestry Equipment WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580 • York Springs, PA Fri., October 21, 2016 For: Southern PA Contractors Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., October 8, 2016 For: Construction Equipment & more YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Darlington, PA Thurs., November 17, 2016 For: Construction Equipment • Kissimmee, FL February 6 – 11, 2017 For: 43rd Annual Consignment Auction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 75
Consign gn Y Your our Equipment Equipme
Page 76 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ritchie Bros. Holds Two-Day Sale in Fort Worth, Texas
W
ith thousands of buyers from around the world participating in Ritchie Bros.’ eighth Texas auction of the year, Ritchie Bros. sold more than 4,400 equipment items and trucks for more than $54 million over two days in Fort Worth from Sept 21 to 22, 2016. More than 4,200 people from more than 55 countries registered to bid in the unreserved auction, including more than 2,900 online bidders. Out-ofstate and international buyers from as far away as Australia, Italy and Vietnam purchased 50 percent of the equipment. Online buyers purchased 47 percent (more than $26 million) of the equipment. “We had very good attendance with steady sales across the board,” said Bill Hogan, regional sales manager, Ritchie Bros. “We saw an uptick in wheel loaders while boom trucks also did very well. Lifting and material handling had a very good day, with a couple of late-model German cranes that sold for over a million dollars each. We’re pleased that we were able to attract local and global buyers while delivering solid results for consignors.” Ritchie Bros. sold equipment for 519 owners. Highlights included more than 320 truck tractors, more than 50 trailers, 100 excavators, more than 115 skid steers, more than 85 forklifts, more than 80 loader backhoes, 80 compactors, more than 35 dozers, more than 40 flatbed trucks, 20 boom trucks, more than 10 cranes and much more.
Specific sales highlights: • Two 2014 Liebherr all-terrain cranes sold for a combined $2.355 million • A 2007 Atlas Copco RD20 III truck-mounted drill sold for $375,000 • A 2015 JMAC portable frac pump sold for $370,000 • Four 2014 DMS Magnum 2500Q portable frac pumps sold for a combined $1.077 million • Three 2013 Peterbilt 367 Tri/A boom trucks sold for a combined $572,500 • Four 2012 Peterbilt 367 Tri/A boom trucks sold for a combined $707,500 • A 2015 Komatsu PC360LC-10 hydraulic excavator sold for $170,000 Ritchie Bros.’ next auction in Texas will take place on Nov. 9 to 10, 2016 in Houston. For more information, visit rbauction.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG Albert Headings (L) and his son, Kayden, an independent contractor in Rose, Okla., think this Cat D6 dozer will be perfect for his next job.
Jeff Miller (L) and his son, Maxx, of Trophy Tractor in Grand Prairie, Texas, take a quick break after a hard day of bidding. Brenda (L) and Jeff Wetzel of Big Iron Heavy Equipment Construction in Blanket, Texas, are very interested in this Cat 621H scraper.
Karen (L) and Danny Whiddon of Seismic Contractors LLC, Corinth, Texas, are enjoying the day and looking at this 250 Sweepmaster.
Leslie Cain, Cain Services in San Marcos, Texas, checks out this Cat 928H loader.
Dale (L) and Jeremy Wilkins of Wilkins Lawn and Landscape in Ardmore, Okla., would like to take this JCB 456 loader back to Oklahoma with them.
Chad Ray (L) and his father, Steve Ray, of Leasing Systems Inc., Nashville, Tenn., plan to bid on — and win — this Hyundai HL 7579 loader.
Scott Turner (L) and Jerry Lane of Scott Turner Construction in Hempstead, Texas, are impressed with this Volvo SD 25 pad-foot, vibratory loader.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 77
Page 78 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son Holds September Sale in Dallas, Texas
Pat McCurdy, an independent contractor of Decatur, Texas, thinks this Allmand MixiLight will be just the thing for when the days start getting shorter.
Allen Blakeman of Blakeman Steel, Haltom City, Texas, hopes to bid on this Case 580L loader/backhoe.
O
n Sept. 20, Alex Lyon & Son held a public auction in Dallas, Texas. Items for sale included dozers, loaders/backhoes, generators, lighting and more. Manufacturers represented included Case, John Deere, Komatsu, WhisperWatt and Allmand, among others. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG Jack gets another bid on an electric jack-hammer.
John Morgan, an independent contractor from Grand Prairie, Texas, is very interested in this John Deere 850C dozer.
Jonathan Jones of Decatur, Texas, an independent dirt contractor, plans to bid on this Komatsu WB146 loader/backhoe to use on one of his projects.
Jerry Watkins of Watkins Construction in Corsicana, Texas, thinks this WhisperWatt AC generator will be great to have for welding.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 79
Page 80 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ritchie Bros. to Offer CAS Sales at Cat Dealer Locations continue to offer its formats.”
ACQUISITION from page 1
investors. “After strong consideration of an IPO and combining with Ritchie Bros., our board unanimously agreed that the best outcome for IronPlanet’s employees and shareholders was to combine with Ritchie Bros,” Owens said. “This combination recognizes the value of IronPlanet’s proven technology platform, our unique IronClad Assurance and the enticing opportunity to combine the IronPlanet and Ritchie Bros. platforms to enable the companies to offer unprecedented choices to customers.” According to Saligram, the new business is being treated as a merger, rather than an acquisition, and several of IronPlanet’s key executives, including Owens, are coming over and joining Ritchie Bros. post closing. “We highly respect and value the skill sets and expertise that their executives and employees bring. Their agility, innovation and technological prowess are great complements to our strategy to offer customers more sales options,” Saligram said. “This is an acquisition based on doing the right thing for customers and driving future growth. We expect there may be some duplicate corporate expenses, such as insurance or external supplier costs, which we can also address to operate more efficiently,” he added. Benefits to Long-Time Customers/Bidders Until the deal closes, both companies will remain independent, but both Saligram and Owens believe that there will be benefits in the long-term to both of their customer groups. “As one company, we will have the ability to provide customers around the world with unprecedented choices with respect to how they want to sell, buy and list equipment: when and where they want, onsite or online, reserved or unreserved,” Owens said. “It’s very positive for customers, because we are making the buying and selling experience more convenient and desirable,” Saligram said. “I think the true benefit of putting these brands together in a portfolio is that you extend the reach to customers by offering more choices. We will be offering choices for Ritchie Bros. customers who may not have used the IronPlanet model and likewise for IronPlanet customers who may not have used Ritchie Bros.’ auctions model. “The other side of it relates to technology sharing by both companies,” he added. “We have expertise bringing integrated live auctions online, whereas IronPlanet has a variety of formats to offer. We have a lot of expertise on the whole, over-the-road truck side and IronPlanet has a top-notch inspec-
“We highly respect and value the skill sets and expertise that their executives and employees bring.” Ravi Saligram Ritchie Bros.
tion system. The strengths of our separate companies will continue to manifest themselves after we merge to truly benefit our customers.” Cat Auction Services Auctions According to both Saligram and Owens, Ritchie Bros. will still offer Cat Auction Services sales at Caterpillar dealer locations. “Cat Auction Services live onsite auctions are big draws for our customers, especially good marketing for the Cat dealers,” Owens said. “We have every intention of continuing these live events. In fact, we are planning a western sale next March 13 to 15 in Las Vegas that we hope to build over time to the scale of our Florida Cat Auction Services event to reach customers on the west coast and dealers in the western side of the U.S. Ritchie Bros. has committed to continuing to run CAS Auctions under the Cat Auction Services brand.” Owens said he doesn’t anticipate any significant change in the frequency of Cat Auction Services events. “I want to see them continue to grow in scale and sales volume. Larger events tend to attract more customers and we want to bring the same excitement and scale to the Las Vegas sale annually that we have in Florida in February,” he said. To Reserve or Not to Reserve Ritchie Bros. is known for its commitment to unreserved auctions; IronPlanet offers consigners the option to put a reserve on a piece of equipment. These are not expected to change under the new business model.
“Ritchie Bros. Auctions, which is our integrated live auction onsite, online brand, has been known for unreserved auctions and I do not see any change whatsoever there. We are very proud of that heritage and our buyers love it. It’s a fantastic model with a lot of runway,” Saligram said. The company also offers an online, reserved model, in its EquipmentOne brand, which, according to Saligram, uses a format similar to IronPlanet’s bidding marketplace. “Interestingly, a significant amount of [IronPlanet’s] volume goes through the weekly auction that is actually unreserved, so they have different formats, both reserved and unreserved. We also have RBA Auctions, which are unreserved, and EquipmentOne, which has a reserve. All of this comes down to customer choice. “There are different types of sellers, all with different ideas of what they value in terms of risk profiles at any particular point in time,” he said. “You have customers that might want to sell some pieces reserved and some unreserved. If it’s a very specialized, unique piece then they may want to put it on a reserve format, whereas something that has a long track record they may choose to sell on an unreserved platform. It’s all about the customer and providing them with even more choices, so they can decide what is best for them. “In terms of the brand positioning, RBA, our primary model, our core model of live on site integrated with online will absolutely, positively remain unreserved,” Saligram added. “As for EquipmentOne, it is already reserved and when IronPlanet comes in the brand, it will stay as IronPlanet and it will
“...our board unanimously agreed that the best outcome for IronPlanet’s employees and shareholders was to combine with Ritchie Bros.” Gregory J. Owens IronPlanet
Will a Caterpillar Alliance Keep Competitors Away? Ritchie Bros. has been selling Caterpillar products and equipment for many years and considers its recently announced strategic alliance a step toward taking that relationship to the “next level.” “We are very proud of this strategic alliance that the combined company will have going forward. Having said that, we were very clear from the onset, and Caterpillar has the utmost respect for our perspective on this, which is we have to continue to have relationships with other OEM manufacturers and dealers,” Saligram said. “That is based on a neutrality model to be like Switzerland. We have great relationships with other equipment manufacturers, be they Volvo, Komatsu, John Deere, JCB or other partners. I do not see this as any kind of issue. We are very comfortable that we will be able to not only build and grow our Caterpillar relationship, but also continue to build our relationships with other OEMs as well as their dealers.” Owens agrees. “What we see is when we have better latemodel, lower-hour equipment to sell, we get more interested buyers, which raises demand and supports pricing. So, whether it is Cat, Volvo, John Deere, Komatsu, or any other make, we will continue offering desirable used equipment at competitive prices. We actually find that many customers desire specific brands of different types of equipment, so having different brands and types of equipment at an auction is actually more desirable for all.” Mascus Acquisition The acquisition of Mascus was on point with Ritchie Bros.’ strategy of becoming a true multi-channel player and catering to the different sectors of the industry in terms of asset management and equipment disposition, according to Saligram. “As you know, one of the major ways that people sell equipment is through private listings and Mascus is a leader of that in Europe — a strong brand with a lot of unique visitors per month. They not only provide advertising services and listing services for their customers, but also a lot of business-to-business tools. “Both IronPlanet and Ritchie Bros. are transactional engines and Mascus is a listing service and we see that very much as part of the portfolio,” Saligram said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 81
Page 82 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SONS INC HOUSTON TX / LIVINGSTON TX.................................................77 AMULET .....................................................................................................6 ATI CORPORATION/LEVEL-BEST...........................................................8 BARGAINS...............................................................................................72 BELL TRUCKS AMERICA INC...........................................................48,63 BLANCHARD MACHINERY ....................................................................14 BOMAG ....................................................................................................37 CALDER BROTHERS CORPORATION .................................................36 CASE CONSTRUCTION .........................................................................27 CASHMAN EQUIPMENT ..........................................................................5 CEG SCALE MODELS ............................................................................13 CLASSIFIEDS ..........................................................................................72 COASTLINE EQUIPMENT ......................................................................23 CONSTRUCTION EQUIPMENT GUIDE CRAWLER LOADER PROMO.......................................................64 CONEX/CONNAGG MAGAZINE...................................................40 CONEX/CONAGG PAPER ............................................................30 WANTED ........................................................................................73 CURRY SUPPLY CO..........................................................................51,65 DITCH WITCH WEST..............................................................................42 DOMINION EQUIPMENT PARTS ...........................................................70 ECCO EQUIPMENT ................................................................................20 ESCO CORP ...........................................................................................66 FLANGE LOCK ..........................................................................................8 HENDRIX MACHINERY LLC ....................................................................3 HITACHI CONSTRUCTION MACHINERY..............................................44 HYDREMA U S INC.................................................................................55 HYUNDAI CONSTRUCTION EQUIPMENT............................................31 IRONPLANET ..........................................................................................75 ISUZU DIESEL.........................................................................................61 JAMES G MURPHY CO CAVE JUNCTION OR ....................................................................79 WARM SPRINGS OR ....................................................................81 JCB INC....................................................................................................68 JFW EQUIPMENT INC............................................................................34 JOHN DEERE ..........................................................................................47
JOHN DEERE SKID STEER ...................................................................26 KIRBY-SMITH MACHINERY INC ............................................................84 KOMATSU AMERICA CORP...................................................................56 LEEBOY ...................................................................................................38 LIEBHERR CONSTRUCTION EQUIPMENT............................................9 MASHBURN EQUIPMENT......................................................................53 MENTOR DYNAMICS LTD......................................................................65 NIXON-EGLI EQUIPMENT COMPANY ..................................................19 NPK CONSTRUCTION EQUIPMENT INC .............................................11 ON THE ROAD TRUCKING....................................................................15 PROFILE PUBLICATIONS ......................................................................10 RANSOME EQUIPMENT SALES LLC/LRH ...........................................73 RITCHIE BROS AUCTIONEERS ............................................................83 ROAD BUILDERS MACHINERY..........................................................7,70 ROAD MACHINERY CO............................................................................2 ROADTEC................................................................................................35 SAKAI AMERICA INC ..............................................................................41 SANY AMERICA INC ...............................................................................23 SCOTT EQUIPMENT ..............................................................................21 TAKEUCHI................................................................................................67 TOWMASTER ..........................................................................................71 VOLVO CONST EQUIP & SVCS ............................................................49 WACKER NEUSON .................................................................................24 WESTRAX MACHINERY.........................................................................17 WIRTGEN AMERICA...............................................................................39 YANMAR AMERICA.................................................................................29
PACIFIC NORTHWEST SUPPLEMENT CASCADE ENGINE...................................................................................7 CONSTRUCTION EQUIPMENT GUIDE ................................................10 EZ SPOT UR..............................................................................................6 FEENAUGHTY MACHINERY COMPANY ................................................9 MODERN MACHINERY ............................................................................3 OREGON TRACTOR ...............................................................................11 ORION......................................................................................................12 PACWEST ..................................................................................................5 TRIAD MACHINERY..................................................................................6
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 2, 2016 • Page 83
Unreserved public equipment auctions
19 0+
LO AD ER BA CK HO ES
ER S
WH EE LL OA DE RS
Metso-Nordberg LT105 Jaw | Denver
MI XE RT RU CK S
S
2014 Kobleco SK140SRLC3 | Chehalis
2 – John Deere 310G 4x4 | Denver
65 +
22 LO 5+ WB OY
2014 John Deere 524K | Denver
2008 Caterpillar 140M VHP Plus | Denver
33 0+
Volvo EC210B | Artesia
3 CR 5+ US H
58 5+
2007 Caterpillar D7R Series II | Artesia
MO TO RG RA DE RS
80 0+
CR AW LE RT RA CT OR S
47 0+
HY DR AU LIC EX CA VA TO RS
Special limited-time financing offer! No payments for 120 days*
3 – Unused – 2016 Witzco Challenger RG50 50 Ton | Chehalis
3 of 4 – Peterbilt 357 w/McNeilus 11 Cu Yd | Chehalis
52,860+ items in 90+ auctions including Chicago, IL Wasilla, AK Artesia, NM Manchester, NH Eckhart Mines, MD Denver, CO Lexington, KY
Oct 6 Oct 8 Oct 11 Oct 11 Oct 13 Oct 13 Oct 18
Chehalis, WA North East, MD Orlando, FL Houston, TX Phoenix, AZ Tipton, CA Pittsburgh, PA
Oct 21 Oct 25 Oct 27 Nov 9–10 Nov 16 Nov 17 Nov 17
Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auctioneer Frederick R. Vilsmeier Lic # 6065, Auctioneer Gregory S. Fuqua Lic # 3078, Kevin L. Perry #RP 2607, Auctioneer, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Business License #AB303, Auctioneer Gregory S. Fuqua # AU2824, Auctioneer Chad M. Johnson # 17668, Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Auction Company Bond #0470724, Auctioneer John Korrey Bond # 0470729, Auction Company License #AY00208L | OAC. Terms & conditions apply. See rbauction.com/financing.
Williston, ND Sacramento, CA
Dec 2 Dec 6
Financing & leasing available Up to 100% financing, with no money down.
Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration
More items added daily Call about selling: 1.800.211.3983
See full auction & equipment listings at rbauction.com
Page 84 • October 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Sales • Rentals • Parts • Service • Financing
2013 Komatsu PC360LC-19 KM13251X $182,000
2013 Komatsu PC490LC-10 Q0029494 $260,000
2009 Komatsu PC138USLC KM09167D $79,500
2006 Grove RT650E GR06524 $240,000
2004 Grove RT890E GR04435 $400,000
2007 Komatsu D85EX-15E0 KM07102 $127,500
2007 Komatsu D155AX-6 KM07926X $120,000
2013 Komatsu D65EX-17 KM13142X $155,000
2016 Komatsu WA270-7 KM16472M $137,900
2012 Komatsu PC200LC-8 KM12054D $89,000
2007 Grove RT530E GR07586 $189,000
2007 Grove RT540E GR07594 $230,000
2012 Deere JD310KEP JD12110J $53,500
2012 Komatsu PC160LC-8 KM12784X $99,500
2012 Komatsu PC130-8 KM12398D $60,000
2007 Komatsu GD655-3E0 KMU07509 $83,500
2016 Komatsu WA320-7 KM16473M $159,900
2012 Kleeman MS16Z KL12016X $137,000
2006 National 18103 NC06388 $200,000
2008 National 18103 NC08478 $225,000
All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.
Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • Odessa • Oklahoma City • St. Louis • Tulsa
Contact Rick Nielsen for details and pricing.
Follow us on
800.375.3339
www.kirby-smith.com