Issuu

Published Nationally

$3.00

Western Edition

® September 20 2026 Vol. XXVII • No. 19

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Security Paving Nears End of Calif. Project

Shafer Equipment Adds DEVELON Offerings...8

John Deere Boosts Tech On Wheel Loaders...18

Crews work along with a slipform paver.

Security Paving Co. Inc. is nearing completion of a $23.5 million project to remove and reconstruct Taxiway S at Ontario International Airport in Southern California, with final work scheduled to wrap up in September. The approximately 2-mi.-long taxiway connects aircraft operating on the airport’s southern side to Runways 26L-8R. The project began in January as part of an ongoing program to upgrade the airport’s airfield

By Irwin Rapoport

CEG CORRESPONDENT

Yoder & Frey, Auction Co. Join Forces...52

Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Truck & Trailer Section . . . . . . . . . . . . . . . . . . . . 21-25 Aggregate & Recycling Section. . . . . . . . . . . . . . 33-37 Attachments & Parts Section. . . . . . . . . . . . . . . . 44-47 Auction Section . . . . . . . . . . . . . . . . . . . . . . . . . . 50-53 Business Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Advertisers Index. . . . . . . . . . . . . . . . . . . . . . . . . . . 54

infrastructure and accommodate its growing cargo operation. Ontario International Airport, located in southwest San Bernardino County, is the eighth-busiest airport in the United States by cargo volume in 2026. It handles a significant share of freight moving between the ports of Los Angeles and Long Beach and destinations throughout the country. Taxiway S was built in 1990 and was rated in fair condition in the airport’s latest Airport Pavement Management System report. see ONTARIO page 32

World-Space Continuum

Advanced Machine Operations Simulation Technology Hopes to Get Trainees Up to Speed Sooner Simulation technology that offers would-be operators a safer approach to training on heavy equipment is now commonplace in the transportation construction sector. MIT aims to advance the machine operations simulation experience and shorten the time it takes operator trainees to get up to speed with intuitive technology and “worldspace” interface. Simulator technology has been used in heavy equipment training for many years now with dramatically positive results. By Lucy Perry

CEG CORRESPONDENT

see TRAINING page 42

Adobe Stock photo

Simulation technology allows trainees to make mistakes safely, learn faster and retain more.

Page 2 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2023 Manitou 3200VT

4212 CAB, HF, 12K lb OW App. 615 Hours

Sale Price $65,800

2017 Bell B30E 30 Ton Arctic

7208A Rebuilt Mercedes Engine 329HP Auto Lube App. 5919 Frame Hours

Sale Price $148,000

2024 CAT D4 LGP

Dynapac CA1500PD

U#ZG0027 CAB, LGP, VPAT App. 2100 Hours

8668 OROPS, 66” Pad Foot App. 754 Hours

Sale Price $196,800

Sale Price $82,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 3

HENDRIX RENTALS LLC "In Business for over 38 Years"

www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla Español

2005 Sullivan 375CFM, Stk#: HR-13066, 4,438 hrs., 150 Max PSI, Pintle Hitch Trailer, ST225x75Rx15 Tires, JD 4045TF25A Eng...... ....................................................... $110,500

2025 Case 580 SV, Stk#: HR-1884, New, EROPS, A/C & Heat, 73 hrs., 4WD, 24” Digging Bucket, Ext-Hoe, Pilot Controls, Aux. Hyd., Rear Quick Coupler, 12x16.5 Front Tires, 19.5Lx24 Rear Tires.............. $109,500

2021 Wacker RC50, Stk#: HR-1665, 54” Smooth Drum, 1,127 hrs.................. $39,500

2021 John Deere 450K LGP, Stk#: HR-1232, OROPS, 6 Way Blade, 3,008 hrs., 24” Pads, 9’ 7” Wide......................................... $69,500

2022 John Deere 700L LGP, Stk#: HR-1383, EROPS, A/C & Heat, Radio, 3,280 hrs., Sweeps & Screens, Rear & Side Screen, 6 Way Blade, 30” Pads, 12 ft. Wide... $159,500

2019 Komatsu D65WX-18, Stk#: HR-1584, EROPS, A/C, 7,141 hrs., 6 Way Blade, 90% U/C, Rear Ripper............................. $109,500

2011 Cat D6K XL, Stk#: HR-1981, EROPS, A/C & Heat, 2,055 hrs., 6 Way Blade, 3 Shank Rear Ripper, 80% U/C.......... $109,500

2023 Linkbelt 210X4, Stk#: HR-1869, 50 ft. Long Reach, EROPS, A/C & Heat, 2,329 hrs., GP Bucket, Bucket, 32” Pads, 11 ‘ 2” Wide.... ....................................................... $129,500

2019 JLG 10042, Stk#: HR-973, 10,000 lbs., 42 ft., 8,189 hrs., 4WD, 4WS, 60” Forks, 62” Frame, Hyd. Self Leveling, 400x75x28 Foam Filled Tires @10%, 4 Cyl. Cummins Eng........ ......................................................... $49,500

2022 Cat GP25N, Stk#: HR-1309, OROPS, 4,500 lbs., 15 ft., 642 hrs., 40” Frame, 48” Forks, LPG Engine, 7.00x12 Front Tires, 6.00x9 Rear Tires............................. $29,500

2021 Skyjack SJ843TH, Stk#: HR-1988, 8,000 lbs, 43 ft., 2,960 hrs., 72” Forks, 48” Frame, 74 hp, Deutz TCD Tier 4 Final Eng., Dana Powershift 3-Speed Trans., 3-Mode Steering............................................ $46,500

2010 CMI C400, Stk#: HR-1897, EROPS, A/C, 7,996 hrs., Fecon BH 250 Mulching Head, 70% U/C................................. $79,500

Page 4 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

WESTERN EDITION Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES 8

SHAFER EQUIPMENT ADDS DEVELON IN NEVADA, IDAHO LOCATIONS

Operating out of Sparks, Nev., and Nampa, Idaho, the dealership will supply contractors with DEVELON heavy and compact equipment as the region rushes to build housing, industrial parks and massive tech data centers.

TOPCON ANNOUNCES TECH PARTNERSHIP WITH GREENVALLEY

JOHN DEERE P-TIER LOADERS RECEIVE TECHNOLOGY UPDATES

EQUIP EXPO EMPOWERS LANDSCAPE PROS WITH SKILLS, CONNECTIONS

Held Oct. 20–23, 2026, at the Kentucky Exposition Center, Equip Exposition is the largest international trade show for landscaping, outdoor living and outdoor power equipment.

INDUSTRIAL TRUCK BEDS REBRANDS AS HILLTIP PREMIUM

The change reflects the company’s expanding truck bed offerings, as well as its alignment with the Hilltip portfolio of snowplows, spreaders, de-icing sprayers, sweepers and other road maintenance equipment.

TRIMBLE LAUNCHES FINANCIAL SOFTWARE FOR CONTRACTORS

TYLER DILLON OF A1 RENT WINS TORO DINGO TX 450 TRACK LOADER

Trimble announced the availability of Trimble Financials software. The new construction-specific financial management and job costing solution is designed to simplify accounting operations for small-business contractors.

Toro announced Tyler Dillon, branch manager of A1 Rent It in Wayzata, Minn., as the winner of the Toro Dingo TX 450 giveaway, a sweepstakes launched to celebrate the Dingo’s legacy as a rental fleet staple.

FAA AWARDS $870M TO AIRPORTS ACROSS U.S.

BOBCAT NORTH DAKOTA OPEN CELEBRATES 62ND TOURNAMENT

The Federal Aviation Administration (FAA) has issued $870 million to airports in 44 states and two territories through the Airport Infrastructure Grants Program (AIG).

The tournament is a stop on the Dakotas Tour, a developmental tour that has served as a starting point for many young professionals wanting to sharpen their game prior to a shot at the PGA, Korn Ferry or Champions tours.

NAVFAC AWARDS $309.65M CONTRACT TO HENSEL PHELPS

DIAMOND MOWERS REVEALS ITS AMERICAN MANUFACTURING PROCESS

Naval Facilities Engineering Systems Command Hawaii awarded Hensel Phelps Construction Co. a $309,650,002 firm-fixed-price contract for the P-716, Red Hill Water Treatment Facility at Red Hill, Joint Base Pearl Harbor-Hickam, Hawaii.

Diamond Mowers is opening its factory doors to show how American-built equipment goes from raw steel to job site-ready performance that goes beyond the “Made in the USA” label.

ABERNETHY RELIES ON JOHN DEERE, STRONG DEALER PARTNERSHIP

Abernethy Contracting of Charlotte, N.C., is working in Huntersville, N.C., where crews are transforming 70 acres of raw land into a commercial development featuring two tilt-up buildings totaling nearly 10 acres under roof. Founder Emeritus (1930-2021) Edwin M. McKeon Sr. Executive Publisher Teddy McKeon Editor In Chief Craig Mongeau Senior Editor Andy Gotlieb Senior Editor Katherine Petrik Production Mgr. John Pinkerton Controller Judith Nixon Circulation Mgr. Cathy Printz Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site www.constructionequipmentguide.com Advertising e-mail production@cegltd.com

Mobile

LinkedIn Facebook

YouTube

CATERPILLAR SUPPORTS RECOVERY EFFORT WITH $250,000 DONATION

The Caterpillar Foundation announced a $250,000 donation to the Center for Disaster Philanthropy’s Global Recovery Fund to support rapid response and long-term recovery in Venezuela.

THE AUCTION CO., YODER & FREY PARTNER TO CONNECT CALIF. CLIENTS

RITCHIE BROS. DEBUTS REDESIGNED APP WITH NATIVE MOBILE BIDDING

The mobile app redesign is the latest example of Ritchie Bros.’ investment in products, technology and capabilities to strengthen buyer engagement and create more value across its global marketplace.

AGGREGATE PRODUCTION & RECYCLING SECTION 33

SHAFT SCREENER BUILDS BETTER, MORE DURABLE MOUNTAIN TRAILS

METSO PRESIDENT, AGGREGATES MARKKU SIMULA TO LEAVE COMPANY

FINLAY LAUNCHES NEW I‑130, I‑130RS IMPACT CRUSHERS

DEPARTMENTS 50 53

COMING AUCTIONS BUSINESS CALENDAR

EQUIPMENT 22

STELLAR Hooklift Bumper Design

For advertising rates Contact

Kent Hogeboom

• National Sales Manager

e-mail

518/221-5159 khogeboom@cegltd.com

Sharon Swanson

• Alaska • Arizona • California • Idaho • Nevada • New Mexico • Oregon • Utah • Washington Cell e-mail

760-518-4336 sswanson@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Jacob Estrello

• Colorado • Louisiana • Oklahoma • Texas Cell e-mail

210/878-5650 jestrello@cegltd.com

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer’s errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Patrick Kiel

Key Accounts Manager • Montana • Wyoming Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 5

SALES. RENTAL. AFTERCARE.

DESIGNED TO SUPPORT YOUR BUSINESS With a range of new and used machines from market-leading brands, we have a solution for every budget. However, if you want to avoid the committment of a purchase, our extensive rental fleet allows you to flex your fleet to meet varying production demands. All with parts and service engineers on hand to keep your operation running.

powerscreentx.com tel: (979) 968-6428

Page 6 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1090 W 2181 N Salt Lake City, UT 84116 801-322-1300 atlasmachinery.us

6565 Smith Avenue Newark, CA 94560 510-400-5024 1535 SE 25th Street Oklahoma City, OK 73129 405-310-8700 6839 W. Chicago Street Chandler, AZ 85226 480-393-5840 5401 S. Arcadia Avenue Tucson, AZ 85706 520-307-1435 Equipmentshare.com

The Easy Way To Advertise Your Equipment

GET REAL STEEL. FOR A REAL STEAL.

Run In Two Consecutive Issues – Black & White $140 • Color $205

Lock in 0% financing, big savings & premium coverage. All built to keep you working this season. LIMITED-TIME OFFERS

CTLs & Excavators Get 0% interest for up to 60 months Wheel Loaders Get 0% interest for up to 48 months OWN TAKEUCHI STEEL. OWN THE SEASON. Contact us today to find the right Takeuchi equipment for your next job. Don’t wait! Offers end September 31, 2026. WEB L A N D M AR K E Q . C O M

TEL (972) 975-5905

*Some restrictions apply. All offers subject to credit approval.

SAMPLE NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE Joseph Fazzio Inc.com • 856-881-3185 N.J.

SEE YOUR BARGAIN AD IN COLOR.

ONLY $65 EXTRA FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $140 per ad, $65 additional for color. • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 21,163 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 7

BOBCAT.COM/BECOMEADEALER

A POWERFUL PARTNERSHIP

STARTS WITH BOBCAT. EXPERIENCE HIGH-POWERED GROWTH WITH BOBCAT. With an expansive lineup of products that continues to grow, Bobcat will help you better serve your existing customers and expand into new markets. In addition to our breadth of products, we’ll back you up with dealer support that is second to none.

Bobcat Company is a member of the Doosan Group. Doosan is a global leader in construction, grounds maintenance and material handling equipment, power and water solutions, and engineering that has proudly served customers and communities for more than a century. Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2026 Bobcat Company. All rights reserved. | 26282

Page 8 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Shafer Equipment Adds DEVELON Topcon Announces Products in Nevada, Idaho Locations Tech Partnership When 50-year construction equipment veteran Jay Shafer include full wheel loader and dozer offerings, DEVELON went looking for heavy machinery to fuel the West’s historic stood out for both product design and responsiveness. building boom, he didn’t rely on sales brochures. “We looked closely at our options,” Shafer said. He and his lead mechanics spent an entire day at “DEVELON offered the best combination of equipment CONEXPO-CON/AGG in March 2026 crawling under, quality and manufacturer support. When we reached out to over and through iron to find equipment built to handle the discuss becoming a dealer, DEVELON was exceptionally region’s toughest dirt. responsive. That level of partnership makes all the difference That hands-on inspection led to a major when you’re serving contractors working on tight deadlines.” regional expansion: Shafer Equipment is now To support the new product line and rapid market an official dealer for DEVELON construction growth, Shafer Equipment is constructing a new machinery across northern Nevada and facility in Reno. The company is upgrading from southwestern Idaho. its current 10,000-sq.-ft. site to an 18,000- to Operating out of Sparks, Nev., and 19,000-sq.-ft. facility on 2.5 acres, scheduled to Nampa, Idaho, the dealership will supply open late this fall. contractors with DEVELON heavy and “Jay Shafer brings five compact equipment as the region rushes decades of proven equipment to build housing, industrial parks and expertise and deep-rooted massive tech data centers. relationships with A DEVELON DX260LC-9 From the massive Tahoe Regional contractors across Nevada excavator Industrial Center east of Reno to rapid and Idaho,” said Morgan server center developments in the Stallings, senior director greater Boise area, northern Nevada of dealer development and and Idaho are experiencing marketing at DEVELON. unprecedented demand for heavy “With explosive growth earthmoving equipment. Business happening in regions like relocation and population growth Reno and Boise, contractors have ignited a surge in residential, need high-performing machinery backed by a responsive, commercial and infrastructure work. customer-first dealer. Shafer Equipment’s reputation for “It’s a booming market here,” said Shafer, the owner of service, flexible fleet options and upcoming facility expansion Shafer Equipment. “When companies move in, employees make them an ideal partner to grow the DEVELON brand follow and that drives the need for homes, apartments, in the West.” schools and infrastructure. That level of growth requires Shafer Equipment is at 955 Greg St. in Sparks and 2205 serious excavation work, and our contractors need high- E. Sherman Ave. in Nampa. performing machines that keep moving.” For more information, visit na.develon-ce.com/en.  When Shafer Equipment set out to expand its lineup to (All photos courtesy of DEVELON.) A DEVELON D45 articulated dump truck

With GreenValley

Topcon Positioning Systems photo Topcon Positioning Systems announced it entered a strategic agreement with GreenValley International (GVI) to collaborate on technologies for surveying, mapping, construction, forestry and other spatial intelligence related applications.

Topcon Positioning Systems announced it entered a strategic agreement with GreenValley International (GVI) to collaborate on technologies for surveying, mapping, construction, forestry and other spatial intelligence related applications. Planned innovations will include integrated hardware and software solutions for handheld, aerial and mobile LiDAR data collection and processing workflows, with developments extending into robotic systems, autonomous monitoring solutions and real-time cloud-based data processing and transfer. “Collaborating with GreenValley allows us to combine the strengths of both organizations and deliver simpler, more efficient workflows to more professionals,” said Ron Oberlander, head of the Topcon Geomatics and Construction Platforms. “By advancing joint research and integrating emerging AI technologies into spatial solutions, we aim to help users collect, process and apply data more effectively, even in remote and challenging environments.” “This alliance unites GVI’s spatial intelligence expertise with Topcon’s precise positioning technologies to deliver nextgeneration solutions for the global geospatial community,” said Cody McColl, North American operations manager with GreenValley International. “Together, we are focused on developing AI-enhanced point cloud processing, including automated feature extraction and classification, multi-sensor integration and intelligent workflow automation to help users collect, process and maximize the value of geospatial data.” GV of Berkeley, Calif., develops spatial intelligence technologies that help professionals capture, process, understand and apply high-precision 3D data. The announcement was made at the Esri User Conference in San Diego, Calif., held July 13-17, 2026. For more information on Topcon, visit topconpositioning. com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 9

#93542 | 2008 KOMATSU D51PX-22, PAT BLADE, REAR SCREENS, 8389 HOURS. ........................................................$67,500

#83814 | 2022 D51PXI-24, 2.0 IMC, 3,735 HOURS.................................$159,500

#93500 | 2023 KOMATSU D61PX-24, #93403 | 2019 KOMATSU D65PXI-18, RIPPER, 1200 HOURS, PREMIER RIPPER, 4833 HOURS....................$159,500 WARRANTY....................................$239,500

#83813 | 2018 KOMATSU D65EX-18, RIPPER, SWEEPS, SIGMA..............$124,500

#93550 | 2006 KOMATSU PC200LC-8, #93518 | 2021 KOMATSU D71PXI-24, #83780 | 2020 KOMATSU PC210LC-11, RIPPER, 30 INCH SHOES, PAT BLADE........... COMBO KIT, QC, 7,665 HOURS, HYD HYD, QC, 3985 HOURS .................$139,500 .......................................................$314,500 THUMB.............................................$89,500

#83748 | 2014 KOMATSU PC240LC-10, #93516 | 2019 TAKEUCHI TL8, CAB/AC, #3774 | 2023 BOMAG BW11RH-5, CAB/AC, #93521 | 2016 BOMAG BW120SL-5, 48 QC, AUX HYD, 11 FT STICK..............$99,500 76 INCH SMOOTH BUCKET, 1127 HOURS..... 521 HOURS .....................................$67,500 INCH DOUBLE DRUM ROLLER.........$17,500 .........................................................$39,500

#83799 | 2022 KOMATSU PC360LC-11, #93537 | 2012 KOMATSU PC290LC-10, 11’6” STICK, HYD THUMB, 4,715 HOURS..... 4950 HOURS, 13 FT STICK, JRB QC, .......................................................$137,500 60 INCH ESCO................................$177,500

#83801 | 2019 KOMATSU PC290LC-11, #83816 | 2019 KOMATSU WA270-8, 2,950 HOURS, ROCKLAND QC ......$144,500 3RD SPOOL, QC BUCKET AND FORKS, 4,552 HOURS ................................$129,500

Page 10 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 11

UP TO

22%

GREATER PRODUCTIVITY UP TO

MORE FUEL EFFICIENT

NEW HX EXCAVATORS

THE MEASURE OF COMFORT. Experience the comfort that only comes from having complete confidence in your equipment. See how Hyundaiʼs Next Generation HX Excavators keep your crew productive and costs under control with machine performance that measures up. na.hd-hyundaice.com/next-gen

1,000 HR SERVICE INTERVALS Compared to previous models

Page 12 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Equip Expo Empowers Landscape Pros With Skills, Connections Every successful landscaping business is built on skilled people, strong leadership and the right equipment. This October, landscape professionals from across North America will gather at Equip Exposition to sharpen their skills, discover new ideas and connect with others who share their passion for the green industry. Held Oct. 20–23, 2026, at the Kentucky Exposition Center, Equip Exposition is the largest international trade show for landscaping, outdoor living and outdoor power equipment. The event welcomes landscape business owners, supervisors, crew leaders and field employees who want to invest in their careers and the future of their businesses. Recognizing the important role that Spanish-speaking professionals play throughout the landscaping industry, Equip will once again offer a growing selection of educational sessions presented in Spanish, making it easier for attendees to learn directly from respected industry experts. “Landscaping is powered by hardworking professionals from many cultures and communities,” said Kris Kiser, president and chief operating officer of the Outdoor Power Equipment Institute (OPEI), which owns Equip Exposition. “Equip Exposition is designed to help every landscape professional develop new skills, discover innovative equipment, build valuable relationships and return home with practical ideas that strengthen their businesses.” Attendees can: • Experience the newest outdoor power equipment through live demonstrations. • Compare products from hundreds of manufacturers in one place.

challenges and lead productive crews while maintaining strong customer relationships. Also offered in Spanish are technical turfgrass management courses led by Manuel Chavarria, Texas A&M AgriLife Extension, covering: • Turfgrass cultural practices • Irrigation water management • Weed management • Integrated pest management “My classes are designed to give landscapers practical, Equip Exposition photo hands-on knowledge they can apply immediately,” said Chavarria. “The goal is to help professionals manage turfgrass more efficiently, save time and money, and deliver • Learn practical business and leadership skills. • Discover techniques that improve efficiency, quality and better results for their customers.” profitability. Event Built for Entire Industry • Connect with landscape professionals from across the In addition to dozens of educational sessions, Equip United States and around the world. Exposition offers keynote speakers, networking events, business education and the industry’s largest hands-on Education Available in Spanish Outdoor Demo Yard, where attendees can operate the newest Spanish-language educational opportunities include: equipment before making purchasing decisions. From Worker to Leader: Developing Your Foreman Spanish-language sessions are easy to identify through the Presented by Armando Actis, equipment manager of Landscape Illinois and certified landscaping technician judge “Taught in Spanish” education track on the Equip Exposition website and mobile app. • Wednesday: 2–3 p.m. The registration fee to attend Equip is $30 through Sept. • Thursday: 9:30–11 a.m. 10, 2026, and registration includes the 30-acre Outdoor • Pre-registration required. This interactive workshop helps experienced crew Demo Yard, where landscape contractors can test drive the members successfully transition into leadership roles. latest equipment, entertainment offerings, admittance to the Participants learn how to motivate employees, communicate keynote speaker, access to the trade show floor of the KEC effectively, manage former coworkers, solve everyday and more. 

Trimble Launches Financial Software for Contractors Trimble announced on July 20, 2026, the availability of Trimble Financials software in the United States. The new construction-specific financial management and job costing solution is designed to simplify accounting operations for small-business contractors. The software provides real-time visibility into project and overall company performance, enabling contractors to monitor profitability and make smarter business operational decisions. “Contractors running small businesses don’t want to — and shouldn’t have to — become accounting pros,” said Jon Fingland, vice president of Trimble. “Trimble Financials is ideal for growing beyond financial management and analysis limitations of paper or spreadsheets and for businesses that may not need all of the features of more advanced, enterprise financial management platforms. The construction-specific capabilities of Trimble Financials also provide usability and job costing advantages over generic, off-the-shelf accounting options.” Trimble Financials is purpose-built for business owners and companies without in-house accounting or bookkeeping expertise and with annual revenues around $10 million or less. The software helps contractors manage projects and financials from proposal through reporting and closeout. Users can quickly create project cost proposals, track expenses by job, phase and cost type and streamline billing with customizable schedules and customer invoicing. As work progresses, financial data from Trimble Financials can populate dashboards that provide a clear view of estimated versus actual costs and the overall status

requirements. Additionally, built-in AI capabilities allow contractors to access support for the Trimble Financials application through real-language prompts. Trimble Financials also integrates with Trimble solutions for estimating and performance tracking, including employee timekeeping. This connectivity can unify office, field, and financial operations in a cohesive industry ecosystem to reduce manual processes and improve real-time data sharing and visibility across critical construction workflows.

Availability: Standalone Or Within Vertical-Specific Software Packs Trimble Financials is now available in the United States as a standalone software subscription. Companies also can purchase the financial management solution as part of new Trimble software packs tailored for small mechanical, electrical and plumbing (MEP), civil or general contractors. Designed to streamline software adoption and field-tooffice connectivity, each pack includes Trimble Financials, the Trimble ProjectSight project management solution, the Trimble Connect common data environment and verticalspecific Trimble solutions for estimating and performance Trimble photo tracking. Trimble also provides industry-leading Trimble Vista and Trimble announced on July 20, 2026, the availability Spectrum systems designed for the financial management of Trimble Financials software in the United States. and enterprise resource planning (ERP) requirements of of business profitability in simplified, contractor-friendly larger construction businesses. formats. The data also flows automatically into financial For more information, visit trimble.com/en/products/ statements formatted to help businesses address accounting trimble-financials. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 13

Grove’s advanced all‑terrain, rough‑terrain, and telescoping crawler cranes redefine efficient lifting. Models like the GHC220 deliver high capacities, smooth control, and smart design features that keep crews confident in demanding environments — supported by Manitowoc’s nationwide service network. With streamlined setup and dependable daily performance, Grove cranes keep productivity high and downtime low. Built to deliver when the job demands more.

manitowoc.com/grove

Kirby-Smith Machinery, Inc. Oklahoma City, OK 405-495-7820

Kansas City, KS 877-851-5729

McAlester, OK 918-310-1550

St. Louis, MO 866-279-1392

Tulsa, OK 800-375-3733

MGX Equipment Services

Western Pacific Crane & Equipment

www.mgxequipment.com

www.wpcrane.com

kirby-smith.com

8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 1500 Madruga Road Lathrop, CA 95330 855-927-2637

19602 60th Avenue NE Arlington, WA 98223 253-254-7950

3521 Alken Street Bakersfield, CA 93308 855-927-2637

91-210 Kalaeloa Blvd. 10680 NW 289th Place Kapolei, HI 96707 Bldg A 808-682-7263 North Plains, OR 97133 971-202-4002 6720 Arctic Blvd. Anchorage, AK 99518 855-342-7263

Ankeny, IA 50021 515-965-1000

Grand Prairie, TX 75050 972-986-0910

Chesapeake, VA 23323 757-935-4300

Dundalk, MD 21222 443-399-7100

Aurora, CO 80011 720-864-9842

Omaha, NE 68138 402-894-9300

Geismar, LA 70734 225-251-7500

Houston, TX 77047 713-433-6411

Phoenix, AZ 85040 602-232-0660

Billings, MT 59101 406-698-6768

La Verge, TN 37086 615-562-3979

Salt Lake City, UT 84120 801-297-8500

Winston-Salem, NC 27105 336-582-7400 Aiken, SC 29801 803-864-2840

Page 14 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Scale Models for Sale

Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 22-B Dragline, 1:50 scale - $295

Vintage Caterpillar 977 Traxcavator, 1:50 scale - $135

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $215

Vintage Caterpillar No.12 Motor Grader, 1:50 scale - $135

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $215

Grove AMZ131XT Articulating Boom Manlift, 1:50 scale - $150

Atlas Copco ROC F7 Track Drill, 1:35 scale - $90

Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160

Dynapac F181 CS Track Paver, 1:35 scale - $90

John Deere 250 Skid Steer Loader, 1:16 scale - $90

Caterpillar D11 Fusion Track-Type Tractor, 1:50 scale - $200

Caterpillar D7E Track-Type Tractor, 1:50 scale - $115

Case Cx210 Excavator, 1:50 scale - $60

Case 580SR Backhoe/Loader, 1:50 scale - $160

Case 580M Backhoe/Loader, 1:50 scale - $50

Caterpillar D9T Track-Type Tractor, 1:50 scale - $165

Shipping and Handling Included

Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

610-506-5961

Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

FAA Issues $870M to Airports Across 44 States Through AIG The Federal Aviation Administration (FAA) has issued $870 million to airports in 44 states and two territories through the Airport Infrastructure Grants Program (AIG). The funds will seek to improve infrastructure, enhance safety and add more family-friendly features to the facilities, according to the FAA. “From our regional hubs to some of America’s busiest airports, we are investing in critical infrastructure,” U.S. Transportation Secretary Sean P. Duffy said. “Upgrading our runway infrastructure is part of our work to usher in the Golden Age of Transportation.” According to the FAA, the plans for the grants include: • $289 million to Los Angeles International Airport for a new terminal access road • $50 million to Miami International Airport terminal roof reconstruction • $9.1 million to Akron-Canton Airport to rehabilitate passenger bridges and reconstruct key facilities • $4.2 million to Juneau International

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 15

Airport in Alaska for snow removal equipment replacement • $3.7 million to Charleston International Airport in South Carolina for terminal expansion • $3.5 million to Sugar Land Regional Airport in Texas for runway reconstruction According toAASHTO, state departments of transportation are also supporting airports in their respective regions of the country with funding. The Alabama Department of Transportation (ALDOT), recently awarded more than $3.1 million in grants to support improvement projects at 11 local airports. Eligible projects may include land acquisition, runway upgrades, facility repairs, maintenance and operational improvements, according to ALDOT. Additionally, the Minnesota Department of Transportation awarded $8 million in state grand funding, via MnDOT’s Aeronautics Capital Grant Fund, to 39 airports statewide to support pavement improvement and turf rehabilitation projects. The funding will support 57 projects overall, according to MnDOT. 

NAVFAC Awards $309.65M Contract to Hensel Phelps

Naval Facilities Engineering Systems Command (NAVFAC) Hawaii awarded Hensel Phelps Construction Co., Honolulu, Hawaii, a $309,650,002 firm-fixed-price contract on Aug. 11, 2026, for the P-716, Red Hill Water Treatment Facility at Red Hill, Joint Base Pearl HarborHickam (JBPHH), Hawaii. Construction is set for August 2029 completion. “This contract marks an important milestone in our commitment to protecting the health and safety of our Joint Base Pearl Harbor-Hickam community and restoring confidence in our water infrastructure,” said Capt. Andrew Hunt, executive officer for NAVFAC Hawaii. The work to be performed provides for, but is not limited to, construction of a new 10-million-gal.-per-day water treatment facility comprised of water treatment granular activated carbon vessels; modifications to the Red Hill Pump Station; modification to the water shaft; structures in support of the water treatment facility; fencing; transmission piping; electrical distribution system; and fire protection facilities. “The P-716 Red Hill Treatment Facility will provide a critical capability to treat and restore the water system, and we are proud to partner with Hensel Phelps to deliver this essential project for Hawaii and our military community,” Hunt added. 

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL:

Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs.

SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Page 16 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Abernethy Relies On John Deere, Strong Dealer Partnership Abernethy Contracting of Charlotte, N.C., is working in Huntersville, N.C., where crews are transforming 70 acres of raw land into a commercial development featuring two tilt-up buildings totaling nearly 10 acres under roof. Serving as the site contractor on the Axial Commerce project for general contractor Evans General Contractors, Abernethy Contracting is responsible for every phase of site development, including grading, underground utilities, curb and gutter, sidewalks, paving and construction of six stormwater ponds. The turnkey contract showcases the company’s ability to manage every aspect of complex site preparation while maintaining an aggressive construction schedule. Work began in March 2026 and is scheduled for completion in March 2027. By securing the grading permit ahead of schedule, crews were able to begin earthmoving early, helping offset weather-related challenges and keeping the project on track. Katherine Petrik

CEG SENIOR EDITOR

Scope of Work Is Substantial. Crews will move nearly 350,000 cu. yds. of material across the site while installing several miles of storm drainage and underground utilities, including a private lift station. The project also includes approximately 19,000 lin. ft. of curb and gutter; 22,500 sq. ft. of sidewalk; roughly 32,000 sq. yds. of asphalt; and more than 40,000 tons of stone. Approximately one-third of the grading work has been completed. Fifteen employees are dedicated to grading operations while another 10 are installing underground utilities, with that workforce expected to grow as utility work intensifies. One of the project’s biggest early challenges involved establishing erosion control while excavating steep drainage areas containing poor soils. Crews also experienced a tremendous amount of weathered rock that was difficult to excavate and hard blue rock which required blasting. Despite the project’s size, Abernethy Contracting has worked to minimize impacts on neighboring businesses and motorists.

Crews will move nearly 350,000 cu. yds. of material across the site while installing several miles of storm drainage and underground utilities, including a private lift station.

When complete, the development is expected to create new commercial opportunities while supporting continued economic growth and future job creation in the Huntersville area. Large Fleet for Large Project Equipment has played a critical role in maintaining production on the massive earthmoving operation. Much of the fleet was supplied by James River Equipment, Abernethy Contracting’s local John Deere dealer. Equipment on the project includes a new John Deere

Abernethy Contracting invested in a dedicated John Deere fleet supported by James River Equipment.

670 P-Tier hydraulic excavator; a John Deere 470 excavator; a John Deere 700 dozer; two John Deere 750 dozers; a John Deere 850 dozer; a John Deere 410 water truck; five John Deere 460 articulated dump trucks; and two Hamm 120 padfoot rollers. The John Deere 670 P-Tier hydraulic excavator has become one of the project’s most valuable production machines. Weighing approximately 154,000 lbs. and powered by a 462-hp John Deere Power Systems engine, the production-class excavator is designed for high-volume earthmoving and demanding rock excavation.

As grading progresses and underground utilities continue expanding across the site, Abernethy Contracting expects the project to be complete early 2027.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 17

This John Deere 750 dozer works on grading for the project.

The machine features three power modes, a high-capacity hydraulic system and enhanced digging forces that allow operators to maximize productivity while maintaining fuel efficiency. Depending on bucket configuration, it can be equipped with buckets exceeding 9 cu. yds., making it well suited for mass excavation applications like the Axial Commerce project. On the Huntersville job, the 670 P-Tier has been excavating weathered rock, constructing stormwater ponds and moving large volumes of material across the site. Its size and digging power have enabled crews to excavate significantly more rock mechanically rather than relying on additional blasting. In harder ground conditions where smaller excavators would struggle to maintain production, the larger machine has helped Abernethy Contracting save both time and operating costs while keeping work moving. Company leadership was evaluating a significant fleet investment but, rather than making the decision from a conference room, they turned to the people responsible for delivering the work every day. “We asked a simple question: ‘What do you need to be successful on this project?’” said Kevin Hyatt, chief financial officer of Abernethy Contracting. The answer was John Deere. Partnership Relies On Trust, Support Based on that feedback, Abernethy Contracting invested in a dedicated John Deere fleet supported by James River Equipment. Today, those machines are helping crews meet key production goals while maintaining the schedule on the

Much of the fleet was supplied by James River Equipment, Abernethy Contracting’s local John Deere dealer.

70-acre development. What stood out wasn’t the equipment itself. It was that leadership trusted the recommendation, backed the people closest to the work and followed through with the investment. According to Abernethy Contracting, dependable dealer support has been just as important as the equipment itself. The company worked closely with James River Equipment’s Jesse King, territory manager, and Kyle Cohoon, general manager, to assemble the equipment package needed for the project. As project requirements evolved throughout construction, the dealer consistently adapted equipment deliveries to meet changing jobsite demands. “The Axial Commerce project is more than just another project,” said Kurt Abernethy, vice president of team development. “We are working for a very large general contractor that has a proven history of expectations on delivery, performance and safety. The needs for this project have been fluid to the point where many times what we asked for was no longer needed. Not once did we hear or see James River complain about the changing equipment environment. They simply delivered.” That partnership extends well beyond equipment sales. “We spent more time together in the beginning talking about life, family and hobbies than we did about equipment needs,” said Hyatt. “This pattern has continued since then and we continue to cultivate the relationship not just with equipment needs but also from a personal relationship capacity.” Long-term support has always been the dealership’s priority.

“We’re celebrating our 100th anniversary this year, so we’ve been around since 1926,” Cohoon said. We’re not looking to just drop some equipment and move on. It’s all about support. When these guys go down, we go down. Partnership goes a long way.” Cohoon added that supporting customers means making sure operators have the tools they need to succeed every day. “Support comes not only from the dealership but also from the guys in the field putting hours in the seat every day,” he said. “We want to make sure they’ve got what they need to be successful.” Because Abernethy Contracting experienced excellent uptime with John Deere equipment on a previous project, choosing the fleet for the Axial Commerce project was a natural progression. “This team had a really good experience with John Deere equipment on the previous project,” said Abernethy. “Across all the brands, that was their favorite because it seemed to have the most uptime. So, when we approached the team, we asked, ‘What do you want? What do you need to be successful on the job?’ They wanted a John Deere package.” As grading progresses and underground utilities continue expanding across the site, Abernethy Contracting expects its combination of experienced crews, high-production John Deere equipment and responsive dealer support to keep the project on schedule for completion in early 2027. For more information, visit abernethycontracting.com and jamesriverequipment.com.  CEG (All photographs in this article are courtesy of Abernethy Contracting.)

According to Abernethy Contracting, dependable The John Deere 670 P-Tier hydraulic excavator has Equipment has played a critical role in maintaining dealer support has been just as important as the become one of the project’s most valuable production machines. production on the massive earthmoving operation. equipment itself.

Page 18 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

John Deere P-Tier Loaders Receive Technology Updates

John Deere photo

With the launch of its next generation 524 P-Tier, 544 P-Tier and 624 P-Tier wheel loaders, John Deere is delivering smart solutions that help boost productivity and support operator confidence on the job site. Built on the foundation of the current P-Tier lineup, these updated models are loaded with technology and job readiness features that empower contractors to do more with less, support safety and help drive down operating costs. “With the latest updates to the P-Tier wheel loaders, we’re delivering more than just performance,” said Katie Voelliger, product marketing manager, John Deere. “When operators arrive at the job site, they know their machines are ready to work. Thanks to simplified routine maintenance, they spend less time on prep and more time on the task at hand. We focused on the details that give our customers a competitive advantage on the job site.” Designed to make job sites more productive, the P-Tier wheel loaders feature an integrated suite of smart systems that simplify maintenance and aid in getting machines ready to run, according to John Deere. With on-board diagnostics, including daily fluid checks, fluid loss detection and battery health monitoring, all easily accessible through the in-cab display, operators can manage uptime with confidence. The John Deere exclusive QuadCool cooling system is a highlight in durability and serviceability in the updated P-Tier wheel loaders. Redesigned rear hoods, grilles and cab roofs eliminate the need to climb on the machine for maintenance, while side-access planes simplify cleaning of the condenser and radiator. The newly relocated axle cooling system is now easier to access and maintain and a reverse fan clears debris out through the side doors, designed to minimize buildup beneath

the machine. In addition, the rear door opens independently from the sides, making daily maintenance more convenient. Inside the cab, operators will now benefit from the new, next generation primary display, a 7-in. primary touchscreen that offers a larger interface and intuitive navigation that helps to enhance operator focus and simplifies operation. This display enables a new in-base rear camera view and supports the ability to run two applications simultaneously, including the backup camera. Also, physical buttons have been removed from the display face to improve user experience, while key machine functions remain easily accessible. An optional G5 secondary display is available to further enhance operator control and customization, offering expanded functionality in a dualscreen layout. To further boost job site performance, the P-Tier models can now be equipped with SmartDetect from the factory. This optional camera-based system enhances operator awareness by detecting objects and people near the machine and provides visual and distinctive audible bystander alerts on the in-cab display. When equipped with SmartDetect, the G5 display acts as a secondary screen, while the next-generation primary display remains the main interface. Combining cameras, radar and machine learning, SmartDetect aids in improving situational awareness and productivity on the job site. Lastly, to support greater material handling efficiency, the P-Tier wheel loaders are now available with new high-strength steel buckets featuring extended lips. These redesigned buckets increase material holding capacity by approximately five percent, allowing customers to move more material per pass and finish jobs more quickly. To learn more, visit JohnDeere.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 19

PHASE 2 OF 6. NO TIME TO BE ANYTHING BUT UP. EYES ON THE PRIZE. 30,000 FOOT VIEW. 1,000 HOUR JOHN DEERE PROTECT™ SERVICE SCHEDULED. PART #RE5044836 IN ROUTE. SERVICE TECH AT THE READY. DIGGER TRACKS TURNING. ADTS MOVING MOUNTAINS. DAY-IN AND OUT. STAY IN THE KNOW. STAY ON SCHEDULE. MAKE THAT STAY AHEAD. IN IT FOR THE LONG HAUL.

Deere.com/MachineOwnership

Page 20 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Trucks & Trailers

SECT I O N

Pages 21-25

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Industrial Truck Beds Rebrands as Hilltip Premium Industrial Truck Beds, the Indianabased manufacturer of premium truck beds acquired by Hilltip in 2022, has rebranded as Hilltip Premium Truck Beds. The change reflects the company’s expanding truck bed offerings, as well as its alignment with the Hilltip portfolio of snowplows, spreaders, de-icing sprayers, sweepers and other road maintenance equipment manufactured in the same Fort Wayne facility. Hilltip Premium Truck Beds designs and manufactures hook-lift and interchangeable beds, as well as dump beds, flat beds, and custombuilt or private-label solutions. These products are engineered to outlast the commercial chassis, while providing optimal load capacity, stability and versatility. “We’re proud to build on strong legacy of Industrial Truck Beds and further strengthen our commitment to North American manufacturing,” said Craig Sandmann, managing director for Hilltip North America. “This new chapter reflects who we’ve become — a team dedicated to producing premium custom truck bed solutions that help people work smarter and more efficiently. Despite the name change, customers can expect us to continue delivering the quality and reliability they’ve expected from this line of truck beds since 1986.” Headquartered in Pietarsaari, Finland, Hilltip is a manufacturer of road maintenance equipment in Europe. With equipment designed and built in an area that averages at least six months of snowfall every year, Hilltip is known for its extreme durability and advanced technologies. Following the acquisition of Industrial Metal Products (Industrial Truck Beds) in 2022, Hilltip has a manufacturing, sales and service location in Fort Wayne, Ind., to better cater to the North American market. For more information, visit hilltipna.com. 

Hilltip photo

Industrial Truck Beds, the Indiana-based manufacturer of premium truck beds acquired by Hilltip in 2022, has rebranded as Hilltip Premium Truck Beds. Hilltip photo

Hilltip Premium Truck Beds designs and manufactures hook-lift and interchangeable beds, as well as dump beds, flat beds and custombuilt or private-label solutions.

Page 22 • September 20, 2026 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Hickory Hill Building, Inc., Delaware

Tired of Wasting Time on Transfer Tanks? Make the switch to higher-capacity mobile fueling and spend less time running back for fuel. A No HAZMAT Fuel Trailer gives you more diesel on hand, fewer fueling trips, less equipment downtime and more control over your day.

NO HAZMAT FUEL TRUCK UPFIT (MTU) 920 gallons of diesel on a medium-duty truck chassis

Stellar Announces Its New Hooklift Bumper Design

Stellar Industries, a 100 percent employee owned and operated manufacturer of work trucks, trailers and service truck and van accessories, announced its new standard bumper design for the popular NXT Series Hooklifts is now available for order. These bumpers are available in both bolton and welded configurations for all new NXT Series orders. The new bumper design simplifies installation while allowing operators to add essential accessories, including cameras, hitch options and gladhands. The bumpers come in two capacity options: the 20K, designed for Class 3 – 6 chassis with a 20,000-lb. pull capacity, and the 90K, built for Class 7 and 8 chassis with a 90,000-lb. pull capacity. This bumper design was developed and tested over the past two years, using datafocused structural testing to ensure precise hitch load ratings, according to Stellar. The project involved an ongoing partnership with Iowa State University’s Center for Industrial Research and Service (CIRAS) to validate multiple configurations under rated load, fatigue and failure conditions. This rigorous

Stellar Industries photo

This bumper design was developed and tested over the past two years, using data-focused structural testing to ensure precise hitch load ratings, according to Stellar.

testing ensures that customers receive a product backed by proven performance and structural integrity, added the company. “We’ve introduced, tested and enhanced the hooklift bumper into something that customers can rely on,” said Tim Worman, director of product management of Stellar. “We are thrilled that we had the opportunity to work with CIRAS on this project and can’t wait for customers to experience the difference.” 

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 20, 2026 • Page 23

Picture Courtesy of MBC Drainage

Scan to Find Your Trailer

FT-14 DDI

The Right Trailer for the Job. Built for Your Equipment, Every Time • Drop Decks • Deck Over Tags

FT-50-3 LP Low Pro with Air Ramps

www.felling.com • 1-800-245-2809

Family Owned & Operated Since 1974 • Made in the USA

Tucson, AZ 520-579-0261

Tukwila, WA 206-995-8420

Lewiston, ID 208-743-0866

Phoenix, AZ 602-437-0351

Fowler, CA 800-350-2595

Snohomish, WA 360-863-2552

Spokane, WA 509-536-7300

Portland, OR 503-286-6400

Richland, WA 509-578-5900

El Cajon, CA 619-448-0770

Sacramento, CA 916-371-6000

Corona, CA 800-491-9004 Ditchwitchwest.com

Petersandkeatts.net

2044 S. Vineyard Ave. Ontario, CA 91761 909-930-1822

2231 Hammer Avenue Norco, CA 92860 951-898-0199

800 E. Grant Line Rd. Tracy, CA 95304 209-830-8600

commercetruck.com

2750 Marion Dr. Las Vegas, NV 89115 702-342-8100 nixonegli.com

Oklahoma City, OK 405-348-4633

Salt Lake City, UT 801-974-9600

Tulsa, OK 918-438-1560

Nampa, ID 208-376-8394

Brighton, CO 303-287-7563

Pocatello, ID 208-646-4360

dwopg.com

Page 24 • September 20, 2026 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 20, 2026 • Page 25

E X P E R I E NCE

EXCEL L E N C E

Visit us at NTDA

Ponte Vedra, FL | Booth 47 October 14-16

Experience Excellence

Founded more than 30 years ago as a one bay repair shop, MAC Trailer has grown into one of the nation’s leading trailer manufacturers while staying true to its small-town values and commitment to doing the job right. Serving large fleets and independent owner operators alike, MAC Trailer delivers high performance trailers and truck bodies backed by dedicated Follow us on sales, a strong dealer network, and comprehensive aftermarket support to ensure lasting value for every customer. www.MACTrailer.com

Page 26 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 27

THE POWER YOU NEED THE POWER YOU YOU NEED NEED IT ANYWHERE ANYWHERE YOU NEED IT

Maximize your productivity anywhere, anytime. Featuring intuitive controls, simple serviceability and proven performance, Bobcat® portable air compressors help you stay on track and keep running longer. Maximize your productivity anywhere, anytime. Featuring intuitive controls, simple serviceability and proven performance, Bobcat® portable air compressors help you stay on track and keep running longer.

STOP BY OR CALL US TO DISCUSS YOUR OPTIONS. STOP BY OR CALL US TO DISCUSS YOUR OPTIONS.

Ditch Witch West www.ditchwitchwest.com

Papé Material Handling Inc. www.papemh.com

OREGON

Portland (503) 639-8910

WASHINGTON

Phoenix (602) 437-0351 Tucson (520) 579-0261

Portland (503) 286-6400

Arlington (360) 474-8461

Eugene (541) 689-7407

Fife (253) 926-4386

Medford (541) 779-3444

Bellingham (360) 756-6572

ARIZONA

NEVADA

Sparks (775) 356-9333

Seattle (206) 722-5800

Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

Page 28 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HERE BY HARD WORK

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 29

Top quality for top performance Bane Machinery is a family owned and operated business that offers heavy machinery sales, rentals, parts, and service. We are proud to offer Liebherr equipment with full service including preventative maintenance and warranty up to OEM standards. Liebherr machines are custom-engineered to perform efficiently. From material

handling to waste management, these machines showcase a range of what’s The Link-Belt X4S Series possible.represents 150 Contact us today to find the right solution for your project application. years of hard work focused on a single goal - don’t just move earth, move it for less. DALLAS, TX

FORT WORTH, TX

2449 Manana Dr Dallas, TX 75220

10505 North Freeway Fort Worth, TX 76177

214-352-2468

817-847-5894

The 220 X4S can save you over $7,000 annually in fuel and DEF while moving up to 13% more material than the competition. Bane_waste.indd 1

Bane Machinery www.banemachinery.com www.banemachinery.com 2449 Manana Drive Dallas, TX 75220 TYLER, TX N. NE Loop 323 800-594-BANE 3402 (2263) Tyler, TX 75708

903-597-6641 10505 North Freeway Fort Worth, TX 76177 800-601-BANE (2263) 6/5/2024 8:24:55 AM

3402 E. NE Loop 323 Tyler, TX 75708 800-594-2200

LBXCO.com Oklahoma Territory Construction Equipment www.oklahomaterritoryequipment.com 3839 West Reno Ave. Oklahoma City, OK 73107 405-917-9191 866-339-6827

2520 E King Street Tulsa, OK 74110 918-835-7200 866-334-6827

Nueces Power Equipment www.nuecespower.com

Corpus Christi, TX 316-289-0066

Houston, TX 713-247-0066

Victoria, TX 361-576-0066

San Antonio, TX 210-310-0066

San Benito, TX 956-361-0066

Bryan, TX 346-621-0066

Laredo, TX 956-725-0066

Triad Machinery www.triadmachinery.com 2141 136th Ave E Sumner, WA 98390 253-722-5600

4440 SW Airport Road Prineville, OR 97754 888-662-2940

19201 Garland Avenue Spokane Valley, WA 99027 509-534-1900

91251 Coburg Industrial Way Coburg, OR 97408 541-342-7700

1210 Dale Lane Mt. Vernon, WA 98274 360-488-3948

18200 NE Riverside Parkway Portland, OR 97230 800-221-8512

Page 30 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

At GEHL, we’re concerned with one thing: The Work.

The new lineup of GEHL skid steers and CTLs delivers easier access, more power and performance, simplified maintenance, and new exclusive designs. Get with your local GEHL dealer today to learn more — it’s time to rethink the skid-steer and CTL game.

Learn more at Gehl.com.

0% for 48 Months or up to $5,500 cash back Belgrade, MT 800-422-9976 Bend, OR 541-688-3172 Billings, MT 406-252-2158

Boise, ID 208-336-8570 Columbia Falls, MT 406-755-5540 Eugene, OR 541-688-7321

modernmachinery.com Jerome, ID Pocatello, ID 208-324-4522 208-233-5345 Kent, WA Portland, OR 253-872-3500 971-222-1710 Missoula, MT Rochester, WA 406-523-1100 360-273-4284

WORKS LIKE YOU

™

Spokane, WA

509-535-1654 LOCAL DEALER INFORMATION GOES HERE warriormachinery.com 2353 So. Cactus Avenue Rialto, CA 92316 866-673-8148

4300 Saco Road Bakersfield, CA 93308 661-237-5496

caequiptx.com 945 E. McGregor Drive McGregor, TX 76657 254-293-6454

Tyler Dillon of A1 Rent It Winner of Toro Dingo TX 450 Track Loader Giveaway Toro announced Tyler Dillon, branch manager of A1 Rent It in Wayzata, Minn., as the winner of the Toro Dingo TX 450 giveaway, a sweepstakes launched to celebrate the Dingo’s legacy as a rental fleet staple. “We had the teams at each of our locations enter the giveaway, so we were all really excited to win,” said Chad Wagner, owner of A1 Rent It. “The Dingo TX 450 will go into our fleet, joining a couple of other Toro Dingo 427s that we rent for smaller jobs and areas with narrower access.” The giveaway invited online entrants and American Rental Association Show attendees to win the redesigned compact utility loader. “The new Dingo TX 450 features a refreshed design while retaining the familiar walk-behind style, straightforward controls and exceptional operating performance that rental stores

and customers have trusted for years,” said Kaitln Ingli, product marketing manager of Toro. The Toro Dingo TX 450 was delivered to Dillon and Wagner at A1 Rent It in Wayzata. A1 Rent It is a locally owned, family–operated equipment rental company that has been serving contractors and residents across the Minneapolis area for more than 60 years. Their steadfast commitment to customer experience is built on empowering people to complete projects efficiently by providing access to top-tier equipment and expert guidance without the cost of ownership, according to Toro. “We might get the new Dingo wrapped and use it for parades and special promotions at our store,” said Wagner. “It could also serve as our friendly yard dog, helping with things like moving trailers and other tasks around the property.” 

Toro photo

The brand-new Toro Dingo TX 450 was delivered to Dillon and Wagner at A1 Rent It in Wayzata.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 31

Arnold Machinery

Sonsray Machinery

arnoldmachinery.com

sonsraymachinery.com

Bringing Silver Service to New Mexico, Colorado, Wyoming & Montana 8420 Quebec St Commerce City, CO 80022 720-954-3031

107798 S. Hwy 89 Etna, WY 83120 208-523-0822

8406 Rainy Lake Rd. Billings, MT 59101 406-481-1640

4500 Broadway Blvd. SE Albuquerque, NM 87105 505-895-1565

10766 Hwy 59 Gillette, WY 82718 307-686-7536

1475 Pioneer Way, El Cajon, CA 92020 619-873-0123

3092 Silverton Road NE Salem, OR 97301 503-362-1371

1701 W Grant Road Tucson, AZ 85745 520-623-5848

10062 Live Oak Avenue Fontana, CA 92335 909-355-1075

6565 E 30th Street Yuma, AZ 85365 928-726-6500

1411 North 27th Ave. Phoenix, AZ 85009 602-269-3221

10950 South Norwalk Blvd, Santa Fe Springs, CA 90670 562-903-7377

2700 US-70 Thatcher, AZ 85552 928-428-1829

300 E Delhi Ave. North Las Vegas, NV 89032 702-649-5012

Page 32 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ontario International Airport Gets Repaved Taxiway ONTARIO from page 1

“Taxiway S is a major south-side parallel taxiway that plays an important role in moving aircraft between the runways, aircraft parking/staging areas and the cargo/airfield areas,” Michael Bishara, vice president of capital development of Ontario International Airport, told Construction Equipment Guide. “It provides an east-west aircraft movement route on the south side of the airfield, generally serving aircraft operating to and from Runways 26L and 26R. It accommodates ADG VI aircraft, including very large cargo aircraft. “This project reconstructed the full-strength taxiway and shoulder pavement along Taxiway S, east of the Cucamonga Channel. It was divided into multiple phasing areas to maintain operation on the south side at all times.” Burns and McDonnell designed the Taxiway S project and also is designing the airport’s next major runway project. ”The challenges included maintaining runway operations and access to cargo and terminal facilities,” said the design team, “minimizing impacts to existing drainage, coordinating around FAA communications, electrical and NAVAID utilities and redesigning the project from rehabilitation to full reconstruction after investigations revealed more extensive pavement deterioration.” The lifespan for the runway pavement will have a similar lifespan to that of Taxiway S. It will be constructed sing the same materials and drainage system. The taxiway reconstruction follows a $90 million runway rehabilitation project completed in December 2024 by Coffman Specialties. That two-phase project involved rehabilitation of the airport’s southernmost Runway 8R-26L, which is approximately 10,000 ft. long and 50 ft. wide. Crews removed approximately 45,000 tons of concrete and placed 80,000 sq. yds. of new concrete. The work also included rehabilitation of Taxiways K, L and Q, elimination of Taxiway P, construction of a new South Vault and Taxiway S8 and installation of LED lighting and other improvements. The airport’s improvement program will continue in January 2027, when construction is scheduled to begin on the 2,600-ft.-long Keel Section of North Runway 8L-26R. The project also includes rehabilitation of Taxiways N, U and W. Both projects are being financed through a combination of federal Airport Improvement Program funds and local funding. Fast-Paced Reconstruction Security Paving’s Taxiway S work includes removal and replacement of the 17.5-in. Portland cement concrete taxiway pavement, asphalt concrete shoulders, cement-treated subgrade, a double 60-in. drainage system, electrical components, joint seals and striping. Most major construction operations are complete. Crews are concentrating on punch-list work, project closeout, final electrical work, minor spall repairs and remaining bid items. “One of the biggest construction challenges is performing the work within an active airport environment while minimizing impacts to ongoing operations,” Thomas Mattivi, Security Paving’s project manager, told CEG. “Access restrictions, security requirements, limited work windows and the need to coordinate construction activities around aircraft movements all add complexity to what would otherwise be a straightforward construction operation. “These challenges are being overcome through detailed planning and constant coordination between the construc-

tion team, airport personnel, and other project stakeholders. Work is carefully phased so that crews, equipment and materials can move efficiently while maintaining the required separation from active airport operations.” The project moved quickly, with the taxiway reconstruction taking place from March 14 to July 31. “The progress of the work all happened extremely fast as it was around a four-month project,” Mattivi said. “With that said, there have been challenges within the project to meet those dates.” The existing taxiway was removed during March and April. Because the work was divided into several phases, the duration varied from two days for the smallest phase to approximately two weeks for the largest. “Because the project was divided into multiple phases of significantly different sizes, the duration varied by phase,” Mattivi said. “Our largest phase took approximately two weeks to complete, while our smallest phase was completed in approximately two days. Our approach was to sequence the demolition and removal operations so that concrete breaking, excavation, loading and hauling could operate continuously and efficiently. Maintaining production was particularly important because all of this work controlled the remainder of the subsequent operations. “One of the biggest challenges was the sheer size and thickness of the existing pavement, combined with the logistical constraints of working at an active airport,” he added. “The work also had to be performed without damaging pavement or infrastructure that was designated to remain. Maintaining the planned sequence was critical because delays in one operation, whether breaking, excavation, trucking or disposal, could affect the entire removal operation.” Crews removed pavement ranging from 17.5 to 23 in. thick using multiple sawcuts and a tumbler to break up the concrete. Three to four excavators typically worked during a shift. “If necessary, a small amount of the subsoil was removed,” Mattivi said, “but the majority of it was mixed with cement to create a CTB [cement-treated base] and used as our underlying section of the concrete.” After demolition, site preparation crews installed mat rebar before placing new P-501 Portland cement concrete designed to achieve a compressive strength of 650 psi at 28 days. “We completed all pours in 15 individual pours, which were a mix between a 42.5-ft.-wide concrete paver and hand pours,” Mattivi said.

Drainage, Electrical Work A major component of the project was installation of a storm drainage system consisting of two side-by-side 60-in. polyethylene pipes. The pipes, totaling 1,395 ft., were installed approximately 14 ft. below grade on the infield side of the taxiway. Multiple crews worked simultaneously during seven runway closures. “We had multiple crews working simultaneously to keep the operation moving efficiently,” said Mattivi. “One crew handled the excavation, with one excavator removing the material and passing it up to a second excavator that loaded the trucks. Another crew placed and prepared the aggregate beneath the pipe, while a separate crew set the pipe. A fourth crew followed behind, backfilling and compacting the material over the newly installed pipe. see ONTARIO page 48

The project as it looked when it just started.

An asphalt coating is applied.

With major reconstruction operations complete, Security Paving is focused on final electrical work, minor repairs, punch-list items and closeout activities ahead of the scheduled September completion.

Pages 33-37

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Shaft Screener Builds Better, More Durable Mountain Trails

MB Crusher photo

Every road starts with a solid foundation. The same principle applies to mountain bike trails.

Carbon frame. Race suspension. Highperformance tires. Every mountain biker searches for the perfect set-up. The most important element isn’t the bike at all – it’s the ground beneath it. Comfort, traction and flow all depend first and foremost on the quality of the trail surface. A well-built trail must withstand weather, repeated use and natural erosion while delivering a consistent riding experience year after year. Achieving that starts long before the first rider arrives. It begins with the excavator and an MB Crusher shaft screener, according to MB Crusher. Start With the Right Ground Italian trail-builder Tasso Trail knows that a durable trail starts with properly prepared material. To prepare the base for new trails, the company chose an MB-HDS207 shaft screener mounted on a Caterpillar mini excavator. Rather than importing aggregates, excavated material is processed directly on site. Soil containing rocks of varying sizes is screened to produce a consistent gradation, creating a stable, free-draining base ready for

final shaping. The result is a trail structure that is easier to compact, offers improved drainage and delivers greater long-term durability, according to MB Crusher. Building Trails Every road starts with a solid foundation. The same principle applies to mountain bike trails.

MB Crusher photo

To prepare the base for new trails, Tasso Trail chose an MB-HDS207 shaft screener mounted on a Caterpillar mini-excavator.

The foundation must carry repeated loads, shed water efficiently and remain stable throughout the seasons. Material preparation is therefore one of the most critical stages of the project. “We used to spend a lot of time raking the soil and bringing in additional material,” said Emiliano Pinzi of Tasso Trail. “Now we can prepare exactly the gradation we need right on site. That allows us to work faster while

achieving a much more consistent result.” By removing oversized rocks and producing a uniform material, the finished base distributes loads more evenly, improves drainage and helps the trail retain its shape for much longer. It’s the same engineering principle used in road construction, adapted to the specific demands of mountain bike trails. see TRAIL page 34

A well-built trail must withstand weather, repeated use and natural erosion while delivering a consistent riding experience year after year.

MB Crusher photo

Page 34 • September 20, 2026 • www.constructionequipmentguide.com • Aggregate & Recycling Section • Construction Equipment Guide

Onsite Screening Creates Durable Trail Foundations

A WIRTGEN GROUP COMPANY

Your strong partner for efficient material processing. MOBILE CRUSHING AND SCREENING PLANTS FROM KLEEMANN

MB Crusher photo

Trail construction demonstrates how a shaft screener can deliver value far beyond conventional construction projects. TRAIL from page 33

Expertise, innovation and quality. KLEEMANN crushing and screening plants excel with outstanding quality, availability and ease of use. Our complete range of mobile jaw, cone and impact crushers, as well as screening plants and stackers, open up a multitude of applications for professional users in the natural stone and recycling sectors. With KLEEMANN plants, you’ll achieve the best results with maximum efficiency!

www.kleemann.info

WIRTGEN AMERICA · 6030 Dana Way · Antioch, TN 37013 · T: (615) 501-0600

kirby-smith.com

www.nuecespower.com

Oklahoma City, OK 405-495-7820

Amarillo, TX 806-373-2826

Hewitt, TX 254-261-1370

Corpus Christi, TX 361-289-0066

Vinton, TX 915-541-0066

Tulsa, OK 918-438-1700

Chico, TX 940-678-5046

Lubbock, TX 806-745-2112

Laredo, TX 956-725-0066

Houston, TX 713-247-0066

McAlester, OK 918-310-1550

Dallas, TX 214-371-7777

Odessa, TX 432-333-7000

San Benito, TX 956-361-0066

San Antonio, TX 210-310-0066

Abilene, TX 325-692-6334

Ft. Worth, TX 817-378-0600

Van Alstyne, TX 469-329-3280

Victoria, TX 361-576-0066

Bryan, TX 346-621-0066

Making the Most of Onsite Material As investment in mountain bike parks and recreational trail networks continues to grow, sustainability has become an increasingly important consideration for contractors and local authorities alike, according to MB Crusher. Processing excavated material on site reduces the need for imported aggregates, limits truck movements and significantly cuts material handling. Instead of becoming waste, excavated soil is transformed into a valuable construction resource. For contractors working in mountainous or environmentally sensitive areas, this approach offers clear advantages: less hauling, fewer material movements and a more efficient job site, according to MB Crusher. The benefits become even greater on remote projects, where transporting material

can be both expensive and logistically challenging. Every truck trip takes time, increases costs and impacts the surrounding environment. Producing specification–ready material directly on site simplifies operations while helping preserve the surrounding landscape. Beyond Traditional Construction Sites Trail construction demonstrates how a shaft screener can deliver value far beyond conventional construction projects. The same equipment used every day in construction, demolition, quarrying and landscaping also enables contractors to deliver specialist trail-building projects efficiently and sustainably. For contractors, this means expanding the range of jobs their excavators can handle. For trail builders and landscape contractors, it provides complete control over material quality without relying on imported aggregates. 

Metso Exec Markku Simula Plans to Leave Company Soon

Markku Simula, president, aggregates business area, is leaving Metso. He will continue in his current role until a successor has been appointed and will leave Metso by the end of February 2027 at the latest. Simula has had a career at Metso spanning more than three decades. Since joining the company, he has held several leadership positions and has served as president of the aggregates business area and a member of the Metso leadership team since 2017.

“Markku has made an exceptional contribution to Metso during his 35 year career,” said Sami Takaluoma, president and CEO of Metso. “He has been instrumental in developing our aggregates business into the leading global business it is today, strengthening our customer focus, technology leadership and operational capabilities.” The recruitment process for a new president, aggregates business area, has started. 

562-463-4000

30% more capacity with pre-screen

480-476-6004 661-942-1177 Construction 951-686-4560 Equipment Guide • Aggregate & Recycling Section • www.constructionequipmentguide.com • September 20, 2026 • Page 35 Sylmar, CA 818-767-7171

www.icmsolutions.com 800-779-4450 www.wagnerequipment.com 4899 West South 348 West 4688South Pacific5300 Heights Rd. 4055 South 2100 500 West

www.compassequip.com SaltMurray, Lake City, UT Oroville, CA UT •UT 18000 Smith Rd Aurora, CO •Hurricane, 303-739-3000 4688 Pacific Heights Rd •St Oroville, CA 5040 S Apple Rock Blvd. NM 348 SouthCO 5300 West Burlington, Hayden, CO320 SFarmington, 530-533-7284 • 530-533-8610 Boise, ID NV Hurricane, UT 970-276-3781 Reno, 719-346-7880 505-327-5331 Colorado5040 Springs, CO St Pueblo, CO4530 N Walnut S Apple Hobbs,Rd. NM 719-390-7316 719-544-4433 North Las575-393-2148 Vegas, NV Boise, ID Durango, CO Yuma, CO El Paso, TX 3433 S 51st Ave. 970-259-2001 970-848-2911 915-821-7651 Phoenix, AZ Grand Junction, CO Albuquerque, NM Windsor, CO www.empire-cat.com 970-242-2834 970-278-1750 505-345-8411 www.pacwestmachinery.com 1725 S Country Club Dr • Mesa, AZ 480-476-6004 Spokane, WA Pasco, WA

Seattle, WA 800-935-5933

800-938-5933

800-929-5933

Mt Vernon, WA 360-588-3083

Portland, OR 800-929-5933

Eugene, OR 866-920-5933

www.westate.com www.icmsolutions.com

3809 Hwy 312800-779-4450 • Billings, MT • 800-999-6676 4899 West 2100 South Salt Lake City, UT

348 South 5300 West Hurricane, UT

5040 S Apple St www.quinncompany.com Boise, ID

Bakersfield, CA Foothill Ranch, CA Oxnard, CA 805-485-2171 661-393-5800 949-768-1777 Riverside, CA City of Industry, CA Lancaster, CA 562-463-4000 661-942-1177 951-686-4560 Sylmar, CA 818-767-7171 wagnerequipment.com

www.pacwestmachinery.com Albuquerque, TXWA Seattle, WA NM Spokane, WA El Paso, Pasco, 505-345-8411 800-938-5933 915-821-7651 800-935-5933 800-929-5933

Mt Vernon, Eugene, OR Aurora,WA CO Portland, OR Grand Junction, CO 360-588-3083 866-920-5933 303-739-3000 800-929-5933 970-242-2834 Bloomfield, NM Hayden, CO www.wagnerequipment.com 505-634-4500 970-276-3781

18000 Smith Rd • Aurora, CO • 303-739-3000 Burlington, CO

Hobbs, NM

719-346-7880 Burlington, CO Hayden, CO 575-393-2148 Farmington, NM 719-346-7880 970-276-3781 Pueblo, 505-327-5331 Colorado Springs, CO CO Colorado719-390-7316 Springs, CO Pueblo, CO 719-544-4433 Hobbs, NM www.quinncompany.com 719-390-7316 719-544-4433 575-393-2148 Bakersfield, CA Foothill Ranch, CA Oxnard, CO CA Durango, Windsor, Durango, CO CO El Paso, TX Yuma, CO 805-485-2171 661-393-5800 949-768-1777 970-259-2001 970-848-2911970-278-1750 970-259-2001 915-821-7651 City of Industry, CA Lancaster, CA Riverside, CA Grand562-463-4000 Junction, CO Albuquerque, 661-942-1177NM 951-686-4560 Windsor, CO 970-242-2834 970-278-1750 505-345-8411 Sylmar, CA

818-767-7171

www.westate.com www.wagnerequipment.com Crushing Equipment Solutions

18000 Smith312 Rd •• Billings, Aurora, CO 3809 Hwy MT••303-739-3000 800-999-6676

cesrock.com

Burlington, CO Hayden, CO Farmington, NM 719-346-7880 940-969-7044 970-276-3781 505-327-5331 Colorado Springs, CO Pueblo, CO Hobbs, NM Tulsa, OK 719-390-7316 719-544-4433 575-393-2148 City, OK Durango, CO Oklahoma El Paso, TX Yuma, CO 970-259-2001 Paradise, TX 915-821-7651 970-848-2911 Tylor, TX Grand Junction, CO Albuquerque, NM Windsor, CO 970-242-2834 970-278-1750 505-345-8411

Lokotrack LT200HPX features an efficient Metso Outotec Nordberg® HP200™ cone crusher and is equipped with a 2-deck pre-screen, allowing for 30% higher capacity. Heavy duty chassis and wide conveyors facilitate high throughput, and direct v-belt crusher drive ensures high fuel efficiency. Service and transportation are made easy with extensive service platforms that fold down for transporting in one piece on a low bed truck. The LT200HPX is best used as a secondary or tertiary crusher in combination with other Lokotrack mobile crushers and screens for high capacity aggregates production. Contact your Metso Outotec distributor or visit our virtual showroom at live.mogroup.com or learn more at mogroup.com/lokotrack.

mogroup.com

Metso Lokotrack® LT200HPX™

30% more capacity with pre-screen Lokotrack LT200HPX features an efficient Metso Nordberg® HP200™ cone crusher and is equipped with a 2-deck pre-screen, allowing for 30% higher capacity. Heavy duty chassis and wide conveyors facilitate high throughput, and direct v-belt crusher drive ensures high fuel efficiency. Service and transportation are made easy with extensive service platforms that fold down for transporting LT200HPX™ in one piece on a low bed truck. Metso Lokotrack®

30% more capacity with pre-screen

The LT200HPX is best used as a secondary or tertiary crusher in combination with other Lokotrack mobile crushers and screens for high capacity aggregates production. Contact your Metso distributor or visit our virtual showroom at live.mogroup.com or learn more at metso.com/lokotrack.

Lokotrack LT200HPX features an efficient Metso Nordberg® HP200™ cone crusher and is equipped with a 2-deck pre-screen, allowing for 30% higher capacity. Heavy duty chassis metso.com and wide conveyors facilitate high throughput, and direct v-belt crusher drive ensures high fuel efficiency. Service and transportation are made easy with extensive service platforms that fold down for transporting in one piece on a low bed truck. The LT200HPX is best used as a secondary or tertiary crusher in combination with other Lokotrack mobile crushers and screens for high capacity aggregates production. Contact your Metso distributor or visit our virtual showroom at live.mogroup.com or learn more at metso.com/lokotrack.

www.westate.com 3809 Hwy 312 • Billings, MT • 800-999-6676

metso.com

Page 36 • September 20, 2026 • www.constructionequipmentguide.com • Aggregate & Recycling Section • Construction Equipment Guide

FROM REDUCTION TO SHAPING

Scan to learn more about our Crushing products.

Your ability to turn virgin material and waste product into high quality aggregates requires equipment with unmatched power and precision. From reducing shot rock to sizing and shaping fine sand, we design and manufacture the most versatile and efficient crushers. Not sure what you need? Let our experts partner with you to apply the ideal solution.

BUILT TO CONNECT astecindustries.com

5811 Edith Boulevard NE Albuquerque, NM 87107 505-344-1300 www.thewesterngroupsw.com

Corporate Office 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

Colorado Springs Service 2259 Commercial Blvd. Colorado Springs, CO 719-576-5541

2340 I-70 Frontage Road Grand Junction, CO 970-241-1550

2600 Center Drive Milliken, CO 970-587-1188

Colorado Springs Parts/Sales 2250 Reliable Circle Colorado Springs, CO 719-576-5541

7854 Hutchins Drive Cheyenne, WY 307-634-5149 39 Kay Cee Lane Durango, CO 970-259-0455

www.powermotivecorp.com

12451 Old Highway 95 Boulder City, NV 89006 702-293-7504

7780 N. Virginia St. Reno, NV 775-971-9124

412 South Jackson Street Amarillo, TX 79101 800-699-1723

#6 West Industrial Circle Odessa, TX 79761 432-333-2887

390 N. 2000 West Lindon, UT 84042 801-796-6126

12639 W. Butler Drive El Mirage, AZ 623-594-5401

102 North Main Street Hereford, TX 79045 806-364-5687

613 S. 4th Ave Mansfield, TX 76063 817-473-2110

622 28th Street Lubbock, TX 79404 806-749-5687

3871 IH - 10 W. Freeway Exit 693 Columbus, TX 78934 979-732-6902

590 Crane St. Lake Elsinore, CA 92530 909-874-2700 www.goodfellowcorp.com

www.texasbearing.com

Construction Equipment Guide • Aggregate & Recycling Section • www.constructionequipmentguide.com • September 20, 2026 • Page 37

Finlay Launches New I‑130, I‑130RS Impact Crushers Finlay, a global manufacturer of mobile crushing, screening and conveying equipment, expanded its horizontal impact crusher range with the launch of the I‑130 and I‑130RS. Positioned between the I‑120/I‑120RS and the larger I‑140/I‑140RS, the new models address demand for a machine that delivers strong impact performance while being easier to transport and configure across a wide range of applications. The I‑130 models were developed for quarrying, recycling, asphalt and demolition operations where efficient reduction, consistent product shaping and simplified material flow are required. At the core is a 1065mm x 1245mm (42-in. x 49-in.) four‑bar rotor with twin hydraulic aprons, delivering aggressive reduction and consistent shaping across a broad range of materials. A direct‑drive system with soft‑start provides smooth engagement, fuel efficiency and reduced wear on drivetrain components. Material is delivered to the chamber via a heavy‑duty vibrating grizzly feeder, with the option of an independent pre‑screen to remove fines ahead of the chamber, reducing wear and improving overall efficiency. Beneath the chamber, an optional under‑pan

feeder provides additional belt protection, managing rebar and directing material safely onto the main product conveyor when used in conjunction with the optional overband magnet. Designed for operators who do not require onboard screening and recirculation, the I‑130 offers straightforward operation, strong service access and durable components, making it a practical solution for high‑output crushing across multiple applications. For operations requiring closed‑loop crushing and on‑board screening, the Finlay I‑130RS integrates a high‑capacity two‑deck afterscreen and recirculation system within the same mid-range platform.

The large two‑deck afterscreen is the biggest in its class, which provides high throughput, screening capacity and flexibility of configuration. Both decks can be recirculated for closed‑loop applications, or operators can divert bottom‑deck oversized material to produce a mid‑grade product, increasing output flexibility without the need for a separate screener. The 500mm (20-in.) recirculation conveyor slews up to 90 degrees, allowing material to be efficiently stockpiled when required. For recycling and C&D applications, an optional windsifter can be fitted to the afterscreen to remove light contaminants such as wood, paper and plastic, improving final product quality.

The I‑130 models were developed for quarrying, recycling, asphalt and demolition operations.

A key feature of the I‑130RS is its modular design. The entire RS section can be quickly detached to reduce transport weight when screening is not required. Alternatively, the RS conveyor can remain in place while only the afterscreen is removed, giving operators the flexibility to configure the machine to suit specific job requirements. Both models offer easy access to service areas, with large platforms, clear walkways and straightforward maintenance points. Fully hinged crusher sections simplify blow bar changes and liner inspections, helping reduce downtime and improve safety. “Building on the market success of the I‑120 and I‑120RS, the I‑130 and I‑130RS were developed to meet demand for a more transport‑friendly impact crusher with increased configuration flexibility,” said Matt Dickson, business line director for Finlay. “The result is a machine that can be tailored to suit a range of recycling and quarrying applications, with options including use of a pre-screen, under-pan feeder, windsifter and onboard recirculation, while remaining easy to operate and maintain for efficient, low‑complexity production on site.” For more information, visit terex.com/ finlay/en/impact-crushers.  (Photo courtesy of Finlay.)

Page 38 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 39

pdqrentals.com

800-300-9997 10826 Shoemaker Ave. Santa Fe Springs, CA 90670 562-944-3206 11037 Penrose St. Sun Valley, CA 91352 818-504-4900 1451 Pomona Road Corona, CA 92882 951-381-6800

28374 Felix Valdez Ave. Temecula, CA 92590 951-676-5751 1110 W. Washington Ave. Escondido, CA 92025 760-745-8745 348 Santa Fe Ave. Vista, CA 92084 760-758-1551

www.powermotivecorp.com

columbiawesternmachinery.com

5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

7854 Hutchins Drive Cheyenne, WY 82007 307-634-5149

1181 Burgundy Drive El Paso, TX 79907 915-872-1001

2259 Commercial Blvd Colorado Springs, CO 80906 719-576-5541

25015 S McQueen Road Chandler, AZ 85249 602-463-3772

2340 I-70 Frontage Road Grand Junction, CO 81505 970-241-1550

6101 Pan American Fwy. Albuquerque, NM 87109 505-345-8383 3100 N 1st Street Bloomfield, NM 87413 505-324-8601

2600 Center Drive Milliken, CO 80543 970-587-1188

4304 Monica Lane Carlsbad, NM 88220 505-485-1700

3300 E. Michigan Street Tucson, AZ 85714 520-649-2858

11125 SW Tonquin Road Sherwood, OR 97140 503-454-0902

Page 40 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.wpi.com

Bobcat photo

The Bobcat North Dakota Open featured a talented and competitive field of professional and amateur golfers.

Annual Bobcat North Dakota Open Celebrates Its 62nd Tournament

The 62nd annual Bobcat Former professional and North Dakota Open welcomed Fargo North graduate, Josh top regional professionals and Persons, won the Amateur amateurs to Rose Creek Golf divisions with a final score of Course while continuing its 15-under 195. Persons shot a tradition of supporting The 6-under par in the final round to Village Family Service Center, tie for sixth overall. a local nonprofit that provides Scott Johnson won the senior counseling, addiction recovery, division and Rick Samson won mentoring and other essential the super senior division. services to children and families The tournament concluded on throughout the region. Aug. 22, 2026 with an awards “When people come together presentation recognizing top with a shared purpose, they can finishers. accomplish more,” said Brad Claus, senior vice president, Making Impact construction products, Bobcat Beyond Greens Co. “The Bobcat North Dakota Since 1984, Bobcat Co. has Open continues to make a served as the tournament’s meaningful difference by lead corporate sponsor, helping supporting The Village and the raise more than $1.3 million to important services it provides to support The Village, according individuals and families across Bobcat photo to the company. our region.” “The generosity through the The tournament concluded with an awards The tournament is a stop on the presentation recognizing top finishers. Bobcat North Dakota Open Dakotas Tour, a developmental helps advance our mission tour that has served as a starting every year,” said Kelly Olson, addition to tournament play, this year’s point for many young professionals schedule included community-focused president and CEO of The Village wanting to sharpen their game prior events such as the Pro Junior Shoot Family Service Center. “The funds to a shot at the PGA, Korn Ferry or Out and Big Brothers Big Sisters Golf raised through this tournament help Champions tours. Clinic, which gave youth and mentors provide counseling, addiction recovery This year also marked the beginning the opportunity to experience the game and other essential services that support of a new three-year partnership between together. individuals and families throughout our the Dakotas Tour and Asher Golf Josh McCollum of Nashville, Tenn., region.” Tour, strengthening the professional won the tournament marking his first In addition to Bobcat Co. serving as participation and continued growth of professional tournament victory of the the tournament’s title sponsor, this year competitive golf in the region. summer. Marco Trstenjak of Winnipeg, included co-sponsor Bell Bank and Canada and Williams Adams of Odessa, other major sponsors D-S Beverages, 2026 Tournament Highlights Texas, tied for second at 18-under par. Fusable, Lapham-Hickey Steel Corp., The Bobcat North Dakota Open Adams also set a new Rose Creek Lenker Consulting, Nodak Insurancefeatured a talented and competitive field course record of 59. Kelly Howe agent and Old National of professional and amateur golfers. In Bank. 

12320 S. Main Street Houston, TX 77035 713-723-1050 Buffalo, TX 903-322-7150 Bryan, TX 979-314-1191 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 Kilgore, TX 903-984-2011 Lufkin TX 936-243-6056

Pflugerville, TX 512-251-0013 Beaumont, TX 409-721-5305 San Antonio, TX 210-648-4444 Tomball, TX 281-351-9016 Victoria, TX 361-288-7203 Laredo, TX 956-539-3718

www.powermotivecorp.com Corporate Office 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188

Cheyenne, WY 307-634-5149 Durango, CO 970-259-0455 Albuquerque, NM 505-345-8383 Bloomfield, NM 505-324-8601 Carlsbad, NM 505-485-1700

El Paso, TX 915-872-1001 Chandler, AZ 602-986-3003 Phoenix, AZ 602-463-3772 Tucson, AZ 520-649-2858

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 41

kirby-smith.com Oklahoma City, OK 405-495-7820 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700 Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Chico, TX 940-678-5046

Dallas, TX 214-371-7777 Ft. Worth, TX 817-378-0600 Hewitt, TX 254-261-1370 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Van Alstyne, TX 469-329-3280

www.modernmachinery.com Corporate Office Missoula, MT 409-842-1754 Boise, ID 208-336-8670 Jerome, ID 208-324-4522 Pocatello, ID 800-829-4450 Billings, MT 800-735-2589 Columbia Falls, MT 800-434-4190

Eugene, OR 800-826-9811 Portland, OR 800-950-7779 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Spokane, WA 800-541-0754

www.clairemontequipment.com San Diego, CA 858-278-8351 Escondido, CA 760-739-9100 Fontana, CA 909-429-9100

Imperial, CA 760-355-7700 Indio, CA 760-863-5558 San Diego, CA 858-278-8338

Technology to help you work smarter Maximize productivity on your jobsites with advanced automation technology. Komatsu’s Intelligent Machine Control (IMC) can help you get the most from your machines, crew and carefully designed plans. • Get new operators up to speed quickly

• Go from mass excavating to finished grading faster than ever • Help eliminate potential damage to design surface

• Empower operators to work efficiently, pass after pass

Page 42 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Simulator Training Can Shorten Trainee Learning Curve TRAINING from page 1

In lineman safety training, CM Labs found that every week a trainee spends on a heavy equipment simulator equates to two weeks or more in the field. Training times and safety improve simultaneously, said Daniel Cooper of the American Line Builders Joint Apprenticeship and Training Committee (ALBAT). In a joint webinar hosted last year, Cooper and CM-Labs’ Gary James discussed how simulation can change how workforce development is approached. Cooper and James both believe simulation technology allows trainees to make mistakes safely, learn faster and retain more. Keeping It Real With Less Stress In the webinar, Cooper said that his goal in adding simulation to ALBAT’s lineman training program was improved safety. “Our biggest training reason for bringing in simulation was that safety aspect,” he said in the discussion. “The movements feel real without the danger.” Heavy equipment simulators empower students to fail safely and learn from their mistakes, believes CM Labs. This approach reduces the stress and pressure of live equipment for trainees as they are still learning. Starting on real equipment straight from the classroom can be dangerous and cause serious accidents, said CM Labs. “So, using the simulator as a stepping stone during training helps with heavy equipment operator safety.” In the webinar, James agreed that simulation training allows students to learn from their mistakes in a safe and risk-free manner. “If you don’t do it wrong a hundred times, you’ll never get it right,” he said.

a more engaging experience. Plus, with simulators students can observe and learn from each other. Hands-on simulation lessons also can foster healthy competition between students, as they check who can get the better score or the fastest time. “You’ll have your star student telling another apprentice how to do it and why it’s done in that manner,” said Cooper. This leads to their retaining more information while fostering team building and making for a more enjoyable learning experience overall. The final point Cooper and James stressed in their webinar is that the use of simulation MIT photo for operator training has been a big shift for the construction industry. MIT and Sumitomo engineers want to shorten the learning curve for excavator operators with a new training interface and more Simulation affords those completely intuitive controller that resembles a miniature excavator’s arm and unfamiliar with the industry the opportunity bucket. to join the workforce and learn both safely and efficiently. Cooper said after just five minutes on the simulator, “Drop your bravado,” said Cooper. “Yes, we didn’t have ALBAT operators told him, “Oh, I can feel the seat. I know these simulators when I came through.” And “live action” my outrigger is floating right now.” will always be best training practice. Students know they’re digging against a utility that they “But if you have a creative nature in your body, you can shouldn’t be digging against because they can actually feel use it to evaluate this next host of operators and apprentices,” it in the chair. he added. He added, “That’s a really excellent tool to have for heavy Heavy equipment simulators make work attainable to equipment operator safety training.” aspiring operators without the stress or dangers previous The two men believe simulation training is an engaging generations faced. approach to learning for students, on a deeper level than It’s also less nerve-wracking for instructors, he and James classroom lectures or presentations. said. It provides numbers, facts and data-driven analysis that By providing hands-on practice, simulation training offers removes any pass-or-fail guesswork.

Adobe Stock photo

Heavy equipment operators must learn complicated mental maps to direct a digger to move rocks, grade soil, clear debris and dig foundations. In fact, it can often take years for operators to build up expertise in maneuvering the heavy machines.

Critical Starting Point for More Proficient, Safer Workforce Caterpillar simulators provide trainees a controlled environment to learn foundational skills, practice complex techniques and build confidence. And they experience these benefits long before they ever climb into a cab, according to a Cat Simulators blog post. Companies and training institutions are using simulation to reduce incidents, reinforce best practices and create consistent training standards, said Cat. “We want to make sure our people are safe,” said David Leonard group technical manager of McConnell Dowell. “Simulation helps us do that by letting them experience hazards before they encounter them on the job.” Cat believes Leonard’s perspective reflects a growing industry shift toward proactive, scenario-based safety training. “Safety training no longer begins on the job site — it begins in a risk-free environment where operators can make mistakes, correct them and improve.” In fact, in another blog post, Cat details how students at the Empower College & Career Center are gaining real-world skills through simulator training. The center’s heavy equipment operator (HEO) pathway in Jefferson, Ga., was one of the state’s first dedicated HEO pathways. Empower expanded its training environment with a Cat Simulators training package allows students to practice working together on a coordinated, simulated job site. see TRAINING page 48

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 43

ALASKA

NC MACHINERY

www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 07-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400

CALIFORNIA

HOLT OF CALIFORNIA

www.holtca.com Pleasant Grove • 916-921-8969

NORTH DAKOTA TRACTOR AND EQUIPMENT

www.tractorandequipment.com Williston • 701-572-8377

WYOMING

TRACTOR AND EQUIPMENT

www.tractorandequipment.com Worland • 307-347-4747

MONTANA

TRACTOR AND EQUIPMENT

www.tractorandequipment.com Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990

TEXAS

MUSTANG CAT

mustangcat.com Beaumont • 409-892-8412 Bryan • 979-775-0639 El Campo • 979-543-3389 Houston • 713-460-2000 Lufkin • 936-639-5551

WASHINGTON

NC MACHINERY

www.ncmachinery.com 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371

S ECTIO N

Attachments & Parts Pages 44-47

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Diamond Mowers Reveals Its American Manufacturing Process

Diamond Mowers is opening its factory doors to show how American-built equipment goes from raw steel to job site-ready performance that goes beyond the “Made in the USA” label. Through a behind-thescenes look at its Sioux Falls manufacturing operation, the company highlights the people, processes and quality standards that have shaped its mowing and vegetation management equipment for more than 25 years. “At Diamond Mowers, ‘Made in the USA’ isn’t just a label. It’s a promise,” said Nate Cleveringa, vice president of engineering and product management. “It means a commitment to engineering equipment that performs in the toughest conditions because it’s made by people who understand the demands of the job firsthand.” From Midwest-sourced steel to final testing, craftsmanship and performance come together to provide equipment that contractors and municipalities trust. From Midwest Steel to Job Site Performance Long before a machine reaches

the field, the work begins. It starts with steel sourced primarily from Midwest suppliers and chosen for its durability and consistency. From there, precision and purpose guide every step inside Diamond’s Sioux Falls, S.D., facility: Precision Cutting: Teams feed large sheets of steel through advanced laser cutting systems that run up to 22 hours a day. This ensures each component meets exact specifications, forming the foundation for consistent attachment performance and fit. Fabrication and Forming: Once cut, workers bend and shape components into the structural elements that define each attachment. This stage is critical for strength, balance and long-term durability. Welding and Structural Integrity: Skilled welders then bring parts together, reinforcing key stress points and confirming the structural integrity required for demanding applications like mulching, mowing and right-ofway clearing. Finishing and Protection: Each piece is painted and coated for protection against corrosion, wear,

any unit leaves the facility, it undergoes a run and evaluation process to confirm performance, reliability and readiness for realworld use. Delivery to the Field: From initial steel processing to final shipment, the full build cycle typically takes one-and-a-half to two months, reflecting a deliberate approach that prioritizes quality and performance over shortcuts. “The meticulous oversight our team displays throughout this manufacturing process pays off where it matters most: performance in the field,” said Cleveringa.

Diamond Mowers photo

Through a behind-the-scenes look at its Sioux Falls manufacturing operation, Diamond Equipment highlights the people, processes and quality standards that have shaped its mowing and vegetation management equipment for more than 25 years.

and the kind of day-in, day-out demands Diamond equipment is built to handle. Assembly: Components come together into the final product:

fully functional attachments and machines, with careful attention to fit, alignment and system integration. Testing and Evaluation: Before

Where Build Quality Pays Off For professionals in vegetation management, roadside maintenance and land clearing, equipment failure amounts to lost time, lost revenue and increased risk. Industry estimates show unplanned equipment downtime can cost contractors hundreds of dollars per hour, underscoring the importance of reliable machines that perform consistently under pressure. see DIAMOND page 46

Diamond Mowers photo

From Midwest-sourced steel to final testing, craftsmanship and performance come together to provide equipment that contractors and municipalities trust.

The Diamond Mowers team

Diamond Mowers photo

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • September 20, 2026 • Page 45

Page 46 • September 20, 2026 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Need Parts? Shop Now! ORDER ONLINE

We Stock Nearly

1,500 Line Items! We Ship

Worldwide! Including everything from hub, brake, suspension, ABS, chassis, hydraulic, and electrical parts to complete axle assemblies.

For The Professional Parts Support You Deserve.

For Your Safe & Secure Online Purchase!

EagerBeaverTrailers.com SAME DAY SHIPMENT / VISA, MC, AMEX accepted

American-Built Products Offer Strong Foundation DIAMOND from page 44

Because it manages fabrication and assembly domestically, Diamond can keep a tighter grip on materials, production and quality standards. It also shortens the distance between engineering, manufacturing and customer support, so that what crews experience on the job can quickly shape what gets built next. Just as important, this process supports the workforce behind the work. Every machine represents the effort of employees who take pride in what they build and how it will be used. Larger Footprint in Field Over time, Diamond’s strategic focus on high performance, from fabrication to the field, has translated into measurable growth and a broader footprint across the industry. For more than 25 years, the company steadily expanded its reach while staying grounded in the same principles that built its reputation in the first place: • more than 40,000 units sold across a wide range of vegetation management

applications • more than 300 dealers supporting customers across the world • more than 25 government contracts, reflecting long-term trust from municipalities and public agencies This scale matters for customers because it means access to equipment, parts and expertise, all backed by a network that understands the complexity of the job. The work ahead will keep changing as demands on equipment continue to grow, from clearing rights-of-way and managing invasive species to maintaining infrastructure and reclaiming land. The one thing that won’t change? Diamond’s commitment to meet those needs by manufacturing reliable, purpose-driven equipment backed by people who stand behind it. “The promise behind ‘Made in the USA’ isn’t just part of our story; it’s the foundation of it,” said Cleveringa. For more information, visit diamondmowers.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • September 20, 2026 • Page 47

ESCO ESCO STDP ®

Standard-Duty STDP Plate Lip Bucket Standard-Duty Plate Lip Bucket

SXDP SXDP Super Extreme Duty

Super Extreme Duty Plate Lip Bucket Plate Lip Bucket

® ™ ® Vertasys Level up with the NEW ESCO toothsystem system Level up with the NEW ESCO Vertasys™ tooth ESCO® buckets are precision engineered and feature the revolutionary Vertasys™ tooth system that provides ESCO® buckets are precision engineered and feature the revolutionary Vertasys™ tooth system that provides optimized point profiles for more machine uptime and a unique vertical lock for reduced maintenance time. optimized point profiles for more machine uptime and a unique vertical lock for reduced maintenance time.

ESCO® Manganese ESCO® Manganese Crusher Wear Parts Crusher Wear Parts

Vertasys Tooth System Vertasys Tooth System ™ ™

MODERNMACHINERY.COM MISSOULA, MT 800-332-1617 BILLINGS, MT 800-735-2589 BOISE, ID 800-221-5211

www.esco.weir www.esco.weir

COLUMBIA FALLS, MT 800-434-4190 EUGENE, OR 800-826-9811 JEROME, ID 800-221-5211

KENT, WA 800-869-2425 POCATELLO, ID 800-829-4450 PORTLAND, OR 800-950-7779

Bucyrus Blades™ Bucyrus Blades™ Cutting Edges and Accessories Cutting Edges and Accessories

WEARPARTSCO.COM ROCHESTER, WA 800-304-4421 SPOKANE, WA 800-541-0754

COLORADO 303-287-1966

Page 48 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Seven Separate Runway Closures Part of Project ONTARIO from page 42

“This work required seven separate runway closures,” he added. “During each closure, approximately 300 to 500 ft. of the operation was completed within a 24- to 48-hour window, requiring close coordination between the multiple crews to keep each stage of the work progressing efficiently.” Security Paving also installed electrical components to bring existing airfield infrastructure into compliance with current Federal Aviation Administration requirements. The work included centerline lights, edge lights and illuminated sign panels, along with runway edge and threshold lighting. Equipment, Materials The project was heavily equipment driven. During demolition, crews used a Fendt 500 Vario towing an impact roller, Cat 340 excavators equipped with H160 hammers and Cat 335 excavators with heavy-duty buckets. CTB placement and grading operations used a Cat 150 motor grader equipped with Trimble Earthworks, Cat 930 loaders, a Cat 613 scraper and a Cat 415F skip loader. Concrete production took place on site with a RexCon Model S batch plant. Placement equipment included a GZ850 slipform paver, GOMACO RTP 500 placers, a triple roller tube paver, a Multiquip SuperScreed and a GOMACO TC rig. Security Paving’s Recycled Base Materials subsidiary supported demolition and concrete recycling operations. The taxiway demolition generated approximately 80,000

Security Paving Co. Inc. is nearing completion of a $23.5 million project to remove and reconstruct Taxiway S at Ontario International Airport in Southern California.

The project required approximately 60,000 sq. yds. of new PCC pavement and 11,100 tons of asphalt concrete pavement.

tons of material. “No materials were recycled for use on site,” said Mattivi, “but we brought in our crushing division, Recycled Base Materials, which crushed 82,000 tons and then hauled it off for reuse elsewhere.”

The project required approximately 60,000 sq. yds. of new PCC pavement and 11,100 tons of asphalt concrete pavement. Additional equipment included Cat 336 excavators equipped with H160 breakers and P214 secondary processors, a Cat 988 wheel loader, a Terex Cedarapids JS3054 jaw crusher, a Cat 950 loader, a Cat TL1055 telehandler, a Schwarze M6 Avalanche sweeper and a McLellan 4K water truck. Peak staffing reached approximately 50 Security Paving and subcontractor personnel. Major subcontractors included Ensley Electric & Pavement Recycling Systems and Monzon and Sons, which provided trucking services. Equipment reliability also has been critical to maintaining the compressed schedule. “We have a dedicated team of 11 experienced mechanics who are prepared to mobilize to the job site at any time,” Mattivi said. “This allows us to proactively address equipment showing signs of potential failure, as well as respond immediately to unexpected breakdowns. Having this level of mechanical support available helps minimize equipment downtime, maintain production and prevent a single equipment issue from disrupting the overall operation.” With major reconstruction operations complete, Security Paving is focused on final electrical work, minor repairs, punch-list items and closeout activities ahead of the scheduled September completion. Security Paving purchases equipment from Quinn CAT.  CEG (All photos courtesy of Security Paving.)

Mechanical Arm Allows Remote Operation for Training TRAINING from page 42

At Paul D. Camp Community College in Franklin, Va., HEO students receive hands-on training and an industry-aligned curriculum. Learners range from recent high-school graduates to adults seeking new skills, a career change or the confidence to operate equipment safely on their property. After completing the eight-week NCCER Core Curriculum prerequisite, students attend classes two evenings a week for 10 weeks. They receive hands-on training on the college’s Cat Simulators — dozer, wheel loader and excavator central to the Level 1 HEO program. Students typically complete approximately 30 hours of simulator time. There’s flexibility for those who need more practice or advance more quickly. “The closer we can emulate the real equipment, the better prepared our students are.” Could Better Mousetrap Be Found? Excavator operators must learn complicated mental maps to direct a digger to move rocks, grade soil, clear debris and dig foundations. In fact, it can often take years for operators

to build up expertise in maneuvering the heavy machines. MIT engineers want to shorten the learning curve for excavator operators with a new training interface and more intuitive controller. Instead of using joysticks, the team has designed a controller that resembles a miniature excavator’s arm and bucket. Trainees grasp the device and use their arm and hand to make it move as an excavator does. Meanwhile a digital excavator projected on an immersive six-screen display mirrors the trainee’s movements in a virtual environment. “This is a more intuitive way to command the machine,” said Hermano Krebs, principal research scientist of MIT’s Department of Mechanical Engineering. “With this new interface, we can eliminate a lot of the mental maps that an operator would need to build in order to operate an excavator.” Jennifer Chu of MIT News reported that Krebs sees the interface as a faster way to train excavator operators. Krebs also envisions a new way to physically operate the machines, both on site and remotely. “Instead of having joysticks, you might

have this miniature arm on the side, where the operator would place their own arm, kind of like an exoskeleton.” This technology would allow them to operate the excavator in the cab, Krebs said. “If work has to be done in a difficult or unsafe environment, you could have an operator sitting off site in a trailer and using this arm to remotely tele-operate.” The team of Moises Alencastre-Miranda, Joao Buzzatto and Eran Beeri Bamani reported its results in the Journal of Computing and Civil Engineering. The trio worked with collaborators from Sumitomo Heavy Industries, industrial machinery manufacturer based in Japan. At MIT, Krebs’ group works on humanrobot interactions, with a long-time focus on physical rehabilitation. They accumulated knowledge about the ways in which humans control their limbs and how they can most intuitively interact with machines. Operators typically learn by driving actual excavators on a controlled driving course. As they operate the machine, novices must learn to relate the actions of the excavator’s joysticks with the movements of the arm, bucket and cab.

Coordinating these actions to carry out actual tasks adds another level of complexity that can take months to years to master. The team reasoned that if they could eliminate the need for this mental map, they might significantly shorten the training process. To do so, they looked for a more natural way to control the machine, as an alternative to the traditional joysticks and landed on the mechanical arm design. The resemblance to the digger’s arm and bucket could enable operators to mimic and control the excavator’s movements directly with less mental translation. The combination of the mechanical arm and virtual simulator constitutes a new training and control platform for digger operators, World-Space Interface. “‘World-space’ refers to everything in the world that is outside of yourself, or in this case, outside of the excavator’s cab,” Krebs said. Normally, operators must build a mental map of how to manipulate things in the world-space, he said. “But now, we can just mime picking up rocks or dirt, and the computer will do that translation to the world-space for us.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 49

POWER MORE. SAVE MORE.

Attention Contractors!

Lock in low-rate financing, big savings & premium coverage. All built to keep you working this season.

Post Your Wanted To Buy Listings FREE!

LIMITED-TIME OFFERS

Excavators & Backhoes 0% interest up to 60 months OR 0.99% up to 72 months OR 1.99% up to 84 months Loaders 0% interest up to 48 months OR 0.99% up to 60 months OR 1.99% up to 72 months GET MORE WORK DONE WITH SANY. Contact us to find the right machine for your next project. Offers end 9/31/2026.

WEB L A N D M AR K E Q . C O M

TEL (972) 975-5905

*Some restrictions apply. All offers subject to credit approval.

Caterpillar Foundation Makes Donation to Earthquake Relief In response to the earthquake in Venezuela, the Caterpillar Foundation announced a $250,000 donation to the Center for Disaster Philanthropy’s (CDP) Global Recovery Fund to support rapid response and longterm recovery in Venezuela. CDP is collaborating with local nongovernmental organizations to deploy immediate needs, including food and water, medical supplies, temporary housing, relief kits and more. “Our thoughts are with the people and communities of Venezuela who have been impacted by this devastating earthquake,” said Asha Varghese, president of the Caterpillar Foundation. “The loss and disruption caused by disasters like this can be overwhelming, and recovery often requires sustained support from many collaborators. The Caterpillar Foundation is committed to standing with communities during times of crisis, and this donation will help provide critical relief and assistance to those affected.” In addition to this donation, the foundation is a member of the American Red Cross Annual Disaster Giving Program (ADGP).

This $1 million annual investment helps the Red Cross preposition supplies before a disaster strikes and provide emergency response after a crisis occurs. The Caterpillar Foundation’s commitment also extends to Red Cross International Services, helping offer hope and comfort to communities around the world. These vital funds support coordinating with the global Red Cross and Red Crescent network to prepare for and respond to emergencies wherever and whenever they occur. The global Red Cross network is on the ground supporting the Venezuela earthquake response.  (Photo courtesy of Caterpillar.)

Here’s How!

List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.constructionequipmentguide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (NJ): LOW HOUR VOLVO WANTED: FAE STCH-SD250 WANTED (TX): JOHN DEERE L110H WHEEL LOADERS. CRUSHER. LOOKING FOR A SKID 3038E TRACTOR LOADER. EMAIL: FLYCAL01@GMAIL.COM EMAIL: FRANK.HORAN@ STEER-MOUNTED CONCRETE ––––––––––––––––––––––––––– HOFFMANEQUIP.COM; CRUSHER THAT MEETS THE WANTED (TX): JOHN DEERE PHONE: 732-674-2095 FOLLOWING SPECIFICATIONS: 3038E TRACTOR LOADER. ––––––––––––––––––––––––––– CRUSHES MATERIAL TO 2” OR WANTED (NJ): VOLVO L110H SMALLER, DISCHARGE RATE: UP EMAIL: FLYCAL01@GMAIL.COM ––––––––––––––––––––––––––– WHEEL LOADERS, LOW HOUR. TO 10 TONS PER HOUR HEAVY EMAIL: FRANK.HORAN@ PLATE REINFORCED CONWANTED: JOHN DEERE 850K HOFFMANEQUIP.COM; STRUCTION 24” WIDE CRUSHING LGP CRAWLER DOZER, SIX WAY PHONE: 732-674-2095 ROTOR WITH 0.5-YARD HOPPER ENC CAB WITH WINCH UNDER ––––––––––––––––––––––––––– CAPACITY ABRASION-RESISREAL HOURS METER AND WANTED (US): CATERPILLAR TANT WEAR COMPONENTS WITH FRAME 3000 HOURS OR 850JLGP 966F II WHEEL LOADERS; REPLACEABLE CARBIDE BITS, SAME WAY WITH WINCH UNDER HITACHI EXCAVATOR: EX200, HARDENED BREAKER, CLEANER, $95000 CDN YEAR 2009 – 2018. EX/ZX270,EX330, ZX330, EX300, AND CHEEK PLATES FOR EASY EMAIL: JEANMAURICCEBOUTIN@ EX400, EX450-5; CAT LOADERS: ON-SITE MAINTENANCE SUITVIDEOTRON.CA; 950B/E, 966D, E, F; CAT GRADERS ABLE FOR CRUSHING BRICK, PHONE: 450-3468975 140G; JOHN DEERE WHEELED BLOCK, ASPHALT, AND UNRE––––––––––––––––––––––––––– EXCAVATOR: 495D, 595D. INFORCED CONCRETE PLEASE WANTED (AR): MECALAC 10 MCR EMAIL: EKTRADINGLLCOMPANY@ PROVIDE YOUR QUOTE. EXCAVATOR. GMAIL.COM; EMAIL: EMMA.B@ANETWORKINEMAIL: FAWCETT.HOTSHOT@ PHONE: 346-469-2517 TEGRATORS.COM; PHONE: 917GMAIL.COM: ––––––––––––––––––––––––––– 397-1928 WANTED (US): CATERPILLAR ––––––––––––––––––––––––––––– PHONE: 870-321-9572 ––––––––––––––––––––––––––– 966F II WHEEL LOADERS; WANTED: HITACHI EX200 OR WANTED: ALL MODELS JCB HITACHI EXCAVATOR: EX200, EX400 EXCAVATOR EX/ZX270,EX330, ZX330, EX300, EMAIL: PAKMACHINERY@GMAIL. SKID STEER LOADERS. EMAIL: JKBAKER.KOTZ@GMAIL. EX400, EX450-5; CAT LOADERS: COM PHONE: 333-228-3898 950B/E, 966D, E, F; CAT GRADERS; –––––––––––––––––––––––––––– COM; PHONE: 907-412-0910 140G JOHN DEERE WHEELED WANTED: CAT D7G CRAWLERS, ––––––––––––––––––––––––––– EXCAVATOR: 495D, 595D. WESTERN USA WANTED: LARGE PORTABLE OR EMAIL: EKTRADINGLLCOMPANY@ EMAIL: BUYDOZERS@GMAIL. STATIONARY GENERATORS IN GMAIL.COM; COM; PHONE: 559-439-3270 ANY CONDITION. ALL MODELS: PHONE: 346-469-2517 ––––––––––––––––––––––––––– CAT, CUMMINS, DETROIT, MTU, ––––––––––––––––––––––––––– WANTED: HYUNDAI 210 W EXCA- PERKINS, VOLVO (DIESEL OR WANTED (NY): JOHN DEERE VATOR. EMAIL: SALIMIBREAKER@ NATURAL GAS). CAN REMOVE IF 550K LGPLGP CRAWLER DOZER. GMAIL.COM NEEDED. WANT TO BUY FROM USER ––––––––––––––––––––––––––– EMAIL: MICHSURPLUS@GMAIL. BULLDOZER 550KLGP 2022 AND WANTED (KY): CATERPILLAR COM; PHONE: 201-587-6300 UP, ENC CAB, SIX WAY WINCH, D10N CRAWLER DOZER N & R ––––––––––––––––––––––––––– UNDER 900 HOURS, REAL HOURS EMAIL: ELNASRM@GMAIL.COM; WANTED: JOHN DEERE 850J LGP METER AND FRAME. PHONE: 502-407-8678 CRAWLER DOZERS. WANT TO EMAIL: JEANMAURICEBOUTIN@ ––––––––––––––––––––––––––– VIDEOTRON.CA WANTED: CASE 580SE BACKHOE BUY BULLDOZER 850JLGP SIX WAY ENC CAB WITH WINCH 2005 PHONE: 450-346-8975 LOADER. ––––––––––––––––––––––––––– EMAIL: WILMANSDIMI@HOTMAIL. AT 2012 REAL HOURS UNDER 900. THANKS, YOU HAVE MY WANTED: LOOKING TO BUY YOUR COM EMAIL FOR PICTURE. NEW UN-NEEDED SPARE PARTS –––––––––––––––––––––––––– EMAIL: JEANMAURICEBOUTIN@ - DEERE, CAT, CASE, IH, ETC. WANTED: CATERPILLAR TH63 ALSO, INDUSTRIAL ELECTRICAL TELEHANDLER WITH ENCLOSED VIDEOTRON.CA EQUIPMENT, FUSES, CIRCUIT CAB. IT CAN HAVE A BAD MOTOR ––––––––––––––––––––––––––– BREAKERS, AUTOMATION ITEMS, I DO HAVE A TH62 WITH A BAD WANTED: VOLVO L70G WHEEL SWITCHES, ETC. TRANSMISSION BUT GOOD LOADERS. GOOD VOLVO L70G CALL HAROLD @ 717-859-4234 OR MOTOR. WHEEL LOADER, L70F, L70E. EMAIL CLEANPOWER@EMYPEO- EMAIL: CRAIGBERENS944@ EMAIL: FRANK.HORAN@ PLE.NET. GMAIL.COM HOFFMANEQUIP.COM; –––––––––––––––––––––––––– PHONE: 616-813-3642 – CALL OR PHONE: 732-674-2095 WANTED: BOBCAT 225D WELDER, TEXT. ––––––––––––––––––––––––––– USED. ––––––––––––––––––––––––––– WANTED: CATERPILLAR 988K EMAIL: NUNIJONS@GMAIL.COM WANTED: JOHN DEERE 550K STRAIGHT EDGE GP FINISH ––––––––––––––––––––––––––– LGPLGP CRAWLER DOZER. PRODUCT BUCKET. WANTED: CATERPILLAR TH63 WANT TO BUY BULLDOZER EMAIL: DUBOISLIVESTOCK@ TELEHANDLER WITH ENCLOSED 550KLGP JOHN DEERE ENC CAB GMAIL.COM; PHONE: (207)-282CAB. IT CAN HAVE A BAD MOTOR. SIX WAY UNDER 600 HOURS, 4445 I DO HAVE A TH62 WITH A BAD REAL HOURS METER AND TRANSMISSION BUT GOOD FRAME NEAR VERMONT OR NEW ––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LIEBMOTOR. YORK. HERR WHEEL LOADER. EMAIL:CRAIGBERENS944@ EMAIL: JEANMAURICEBOUTIN@ EMAIL: MABAT_560@YAHOO. GMAIL.COM; CALL OR TEXT 6I6VIDEOTRON.CA CO.UK 8I3-3642 PHONE: 1-450-346-8975. ––––––––––––––––––––––––––– ––––––––––––––––––––––––––– –––––––––––––––––––––––––––

Page 50 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Timed Online (NJ) September 13 - 27, 2026 For: Construction & Utility Equipment Auction • Albany, NY Thurs., September 24, 2026 For: Late Model Construction Equipment Auction • Queretaro, MX Fri., September 25, 2026 For: Construction & Utility Equipment, Truck & Trailer Auction • Atlantic City, NJ Sat., September 26, 2026 For: Construction & Utility Equipment Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 • Midwest Regional Auction September 24, 2026 • Elkhart Iowa Auction September 29, 2026 • Orlando Auction October 8, 2026 ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • Online Ends September 22, 2026 For: Village of Watkins Glen Surplus Auction

Coming Auctions To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com BIG IRON AUCTIONS www.bigiron.com 800-937-3558

FREIJE & FREIJE AUCTIONEERS www.freijeauctioneers.com 317-539-2895

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Online Wed., September 23, 2026 For: Farm, Construction and Truck & Trailer Auction

• Online Only (IN) Sept. 21 – Oct. 13, 2026 For: “Rent-It” Rental Store Liquidation Auction

• Online Wed., October 7, 2026 For: New Equipment, Attachments & More Auction

• Online Wed., September 30, 2026 For: Farm, Construction and Truck & Trailer Auction

• Indianapolis, IN Tues., September 22, 2026 For: Onsite Real Estate Auction

BRIGHT STAR AUCTIONS www.brightstarauctions.com 574-825-0704 • Wingo, KY Fri., September 25, 2026 For: Wright’s Sawmill Inc. Liquidation Auction • Somerset, KY Fri., September 25, 2026 For: Complete Rental Equipment Business for Sale DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., September 26, 2026 For: Utility, Construction Equipment & Related Items Auction

• Online Ends September 22, 2026 For: Town of Red Hook Highway Surplus Auction

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• Online Ends September 23, 2026 For: Village of Florida, NY Surplus Auction

• Online (AZ) Wed., September 30, 2026 For: Sierra Mining & Crushing Annual Equipment Reduction

AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401

DPA AUCTIONS dpaauctions.com 800-492-9090

• Online September 8 – 23, 2026 For: Online Auctions Closing Daily!

• Online Wed., September 22, 2026 For: Online Equipment Auction

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • Online September 22, 2026 • Online September 29, 2026

DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853 • Lebanon, OH Sat., October 10, 2026 For: Fall Cincinnati Heavy Equipment, Truck & Trailer Auction

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

• Clayton, IN Thurs., October 1, 2026 For: The Fall Midwest Construction & Ag Equipment Auction

• Timed Online September 22 - 23, 2026 For: Southeast Region Auctions

• Clayton, IN Thurs., October 1, 2026 For: Midwest Public Automobile Auction

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085

HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012 • Online Only September 9 - 22, 2026 For: Monthly Construction, Heavy Trucks & Government Auction • Online Only (MN) September 15 - 21, 2026 For: Pike Consignment Auction, Construction Equipment, Trucks & Trailers • Online Only (MI) Sept. 18 – Oct. 5, 2026 For: Logging, Construction & Truck Consignment Auction • Marshfield, WI Mon., September 28, 2026 For: Fait Farms Liquidation Auction HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Birmingham, AL Sat., September 26, 2026 For: Collector Motor Series Live Auction HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Virtual, Live Broadcast Wed., September 30, 2026 For: Merlo, Inc. Absolute Auction Surplus Liquidation

• Montgomery, AL September 22 – 24, 2026 For: 53rd Annual Fall Auction

• Walkerton, IN Sept. 30 – Oct. 1, 2026 For: 4-Day Farm & Equipment Consignment Auction MAYNARDS INDUSTRIES www.maynards.com 248-569-9781 • Online Wed., October 7, 2026 For: David G Horsey & Sons Inc Auction McGREW AUCTION CO. www.mcgrewauction.com 717-428-0922 • Seven Valley’s, PA Tues., September 22, 2026 For: Tractor & Construction Equipment Auction • Seven Valley’s, PA Tues., October 6, 2026 For: Tractor & Construction Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • Online Wed., September 23, 2026 For: Vehicles & Equipment Auction

JAMES G. MURPHY INC. AUCTIONEERS • Online Thurs., September 24, 2026 www.murphyauction.com For: Construction Equipment Auction 425-486-1246 • Online (WA) October 1 - 8, 2026 For: Marysville Heavy Equipment, Contractors Equipment, Trucks & Vehicles Public Auction

• Online Tues., September 29, 2026 For: Government Auction

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

• Online Thurs., October 1, 2026 For: Truck & Trailer Auction

• Online Wed., September 30, 2026 For: Ag Equipment Auction

• Cleveland, TX RES AUCTION SERVICES Thurs., September 24, 2026 www.RES.bid For: Houston Construction Equipment & 833-SOLD-RES Truck Auction • Wooster, OH • Atkinson, NH Fri., October 2, 2026 Sat., September 26, 2026 For: Liberty Companies Equipment For: Northeast Live & Online Dispersal Auction Consignment Auction • Online (SC) Tues., September 29, 2026 For: Real Estate & Personal Property Auction • Pelzer, SC Thurs., October 1, 2026 For: Southeast Automobile Auction KRAFT AUCTION SERVICES LLC bid.kraftauctions.com 574-586-1030 • Online Only September 28 - 29, 2026 For: 4-Day Farm & Equipment Consignment Auction

RTi AUCTIONS www.rtiauctions.com 585-243-1563

• Rochester, NY Sat., October 3, 2026 For: Monroe County Municipal & Contractor Equipment Auction SHETRON AUCTION & EQUIPMENT LLC www.shetronequipment.com 717-532-8828 • Shippensburg, PA Wed., September 30, 2026 For: Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 51

NO MINIMUMS - NO RESERVES -BID ONLINE-

10 HRS

James G. Murphy Co. 425.486.1246 murphyauction.com

9 HRS

2024 CAT 313GC

2024 CAT 307

29 HRS

2020 FREIGHTLINER M2

2024 CAT 307

14 HRS

2024 CAT 303CR

2006 KENWORTH T800

15 HRS

8 HRS

2024 CAT 305.5

2024 FREIGHTLINER M2

2022 CHEV 3500

(1 OF 2)

2007 STERLING ACTERRA

2024 FORD F550 XLT 4X4

2023 RAM 5500 4X4

PUBLIC ONLINE AUCTION

6 HRS

Marysville Heavy equipment, contractors equipment & vehicles Start Date: 10:00 AM | Thursday - October 1 End Date: 10:00 AM | Thursday - October 8 Preview: 8:00 AM to 4:00 PM | October 6 & 7 Location: 3803 136th St. NE, Marysville, WA 98271 Go To murphyauction.com For More Information!

Scan For Full Preview Updated Daily! murphyauction.com 9 HRS

2016 KENWORTH T880 ADDITIONAL ITEMS: •(6) EXCAVATORS •WHEEL LOADER •TRACTOR

2005 PETERBILT 379 •TELESCOPIC FORKLIFT •(3) FORKLIFTS •(3) BOOM LIFTS •(2) MOWERS

•(5) UTV’S •(8) TWIN LINE WRECKERS •(2) SINGLE LINE WRECKERS •(6) ROLL BACK TRUCKS

2024 CAT 320GC 11 HRS

2024 CAT 313GC •(2) SCISSOR TRUCKS •(2) DUMP TRUCKS •(5) ROLL OFF TRUCKS •(3) FLAT BED TRUCKS

2024 CAT 320GC •TRAILERS AND MUCH MORE!

THE WEBSITE IS UPDATED DAILY!

Page 52 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Auction Co. Joins Forces With Ritchie Bros. Debuts Yoder & Frey to Connect Calif. Clients Redesigned App With Native Mobile Bidding

The Auction Co. photo (L-R) are Jonnie Keys of Yoder & Frey and Euro Auctions and The Auction Co. co-founders Claudia Knopp and Steve Gorin.

After nearly three decades of serving California’s construction, transportation and industrial equipment markets, The Auction Co. is joining forces with Yoder & Frey, becoming part of the global Euro Auctions network. The collaboration brings together two established auction businesses with a shared commitment to customer service, industry expertise and professional auctioneering. For customers in California, the partnership creates access to a significantly broader national and international buyer network while preserving the local relationships and personalized service that have defined The Auction Co. since its founding. Founded in 2003 by Claudia Knopp and Steve Gorin, The Auction Co. said it has built a strong reputation for honest, professional auction services throughout California. The company operates auction facilities in Colton and Madera, with offices in Murrieta, specializing in construction and heavy equipment, rental fleets, trucks, trailers, vehicles and government surplus assets. The company said the heart of the business is a straightforward philosophy: Put customers first and deliver results through honesty, integrity and professionalism. That philosophy will continue under the new partnership. Knopp and Gorin will remain actively involved in leading the business, supported by the experienced team customers already know. The company’s existing

locations, local expertise and customer relationships will remain central to its operations. “Joining Yoder & Frey and becoming part of the Euro Auctions network represents an exciting next step in the development of our company,” Knopp said. “We have built The Auction Co. by putting our customers first, and it was important to us to partner with an organization that shares those same values. “Yoder & Frey and the wider Euro Auctions group have built a network of owner-operated businesses with strong local leadership, experienced teams and a genuine commitment to customer service. That made this a very natural fit for us.” The partnership gives The Auction Co.’s customers access to the broader Euro Auctions marketplace and international buyer base. With the addition of The Auction Co.’s California operations, the network now includes six auction sites in the United States, seven in Canada, five in Europe, one in the UAE and one in Australia. For sellers, the expanded network provides an opportunity to market equipment consigned in California to buyers far beyond the traditional regional marketplace. Greater exposure to national and international buyers can create increased competition for equipment and open new opportunities for sellers. For buyers, the partnership provides access to a wider selection of construction equipment, heavy

machinery, trucks, trailers and other industrial assets through an established California auction operation. “For our customers, it is very much business as usual,” Gorin said. “They will continue dealing with the same people, at the same locations and with the same level of personal service they have come to expect from us. What has changed is the reach behind the business. We can now introduce their equipment to a truly global marketplace and connect California sellers with buyers well beyond our traditional market.” Jonnie Keys of Yoder & Frey and Euro Auctions welcomed The Auction Co. and its team to the group. “The Auction Co. has built an outstanding reputation over many years, and the team shares the same customer-focused culture that exists throughout our network,” Keys said. “Their addition strengthens our presence on the West Coast while giving their customers access to buyers around the world. This collaboration combines local expertise with global capability. The Auction Co. remains a trusted California business, while benefiting from the scale, technology and international reach of a global industrial equipment auction group. “For customers, it is business as usual, only now with the backing of a global organization and an auction network that spans multiple continents. The future remains firmly rooted in California, but the marketplace has become worldwide.” 

Ritchie Bros. announced the launch of its redesigned mobile app, giving buyers the same bidding power on their phones as on their desktops. Developed in response to buyer feedback, the update transforms the app from a mobile browsing companion into a fully native bidding and transaction experience. The new Ritchie Bros. mobile app offers buyers a faster, easier way to search inventory, track watchlists and place bids directly from their mobile devices, according to the company. The mobile app redesign is the latest example of Ritchie Bros.’ investment in products, technology and capabilities to strengthen buyer engagement and create more value across its global marketplace. The update reflects how buyers increasingly expect to transact: with full access to the tools they need, whether they’re on a job site, in transit or off site. The redesigned app now brings bidding directly into the mobile interface, enabling Ritchie Bros. to deliver an improved experience for the more than 120 million annual visits to its’ marketplace, according to Ritchie Bros. Users will be able to better monitor their watchlists, confirm their bidding limits, securely place bids and participate in auctions from wherever they are. Early data also points to strong buyer engagement, underscoring the potential impact of the app’s redesign for Ritchie Bros. Buyers who participated in pre-launch testing converted from search to watchlist at more than double the rate seen on the web platform, and watch-listed items went on to receive a bid within 14 days. “Our buyers operate in fast-paced, high-stakes environments where split-second decisions dictate business success,” said Shiv Dutt, executive vice president and head of RB Marketplaces, Ritchie Bros. “Targeted investments like this modernize our technology to improve the customer experience and represent a significant step forward in enhancing access to our inventory. By engineering a native bidding ecosystem and integrating real-time auction trackers, we are giving our global buyer base the ability to view, compare, bid and buy from anywhere, without friction.” Key Technology and User Experience Enhancements: • Native Bidding & Bid Focus Mode: Buyers can place bids directly from search results and listings, with no browser redirect and see instantly whether they’re winning or have been outbid. • Live Auctions: Buyers can track closing lots in real time and bid with one tap. • Smarter Search & Browsing: Search suggestions and a revamped browsing experience help buyers find relevant inventory faster. • Enhanced Listings: Every listing now includes a revamped inspection report and full photo library, giving buyers more information before they bid. • My RB Tab: A single place to track bids, watchlist items and saved searches, with new matching inventory surfaced as soon as it’s listed. The updated Ritchie Bros. app is available now for iOS and Android through the Apple App Store and Google Play Store. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 53

AUCTIONS

CONSTRUCTION

EQUIPMENT

THURSDAY, OCT 8

ALL ITEMS SELL NO RESERVE!

ED0185

ED0186

DU1545

ED0187

ED0188

2024 XCMG XC958U wheel loader

2023 XCMG XE300U excavator

2019 Kenworth T880 dump truck

XCMG XE155UCR excavator

2022 XCMG XE155UCR excavator

YA4843

ET0495

FC4242

FI2011

2023 International HV507 digger derrick truck

2015 John Deere 844K-II wheel loader

2014 John Deere 672GP motor grader

2005 Gomaco GT-3600 slipform paver

INVENTORY INCLUDES: dozers, wheel loaders, haul truck, rock boring saw, backhoes, dump bucket trucks,trucks, skid steers, telehandler, INVENTORY INCLUDES: dozers, wheel loaders, excavators, directional units, dumpexcavator, trucks, scrapers, motor graders, mini excavators, crane trucks, service trucks, material transfer vehicle, steers, vacuum trucks, compact more.and more. scraper, mini excavator, screening plants, crane truck, singleskid drum vibratory roller, drilling rig utility truck,loaders, bucketand trucks,

Business Calendar

To view our Business Calendar online, go to www.constructionequipmentguide.com. ASSOCIATED GENERAL CONTRACTORS (AGC) AGC Events Calendar: All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place. • Construction Project Manager Course • National Chapter Leadership Conference Start Date: Sunday, September 27, 2026 (8:00 AM) End Date: Tuesday, September 29, 2026 (7:00 PM) Washington, District of Columbia • AGC EDGE Leadership and Motivation (STP Unit 1) Start Date: Monday, September 28, 2026 (1:00 PM) End Date: Tuesday, October 6, 2026 (5:00 PM) Online, Virtual Training/Professional Development • AGC EDGE Blueprint Reading Basics Start Date: Monday, September 28, 2026 (2:00 PM) End Date: Tuesday, October 6, 2026 (5:30 PM) Online, Virtual Training/Professional Development • Webinar: Strategic Thinking: From Reactive Growth to Intentional Strategy A Four-Part Strategic Planning Series Date: Tuesday, September 29, 2026 Time: 2:00 PM to 3:00 PM Training/Professional Development • Leadership for Project Executives Course Start Date: Monday, October 5, 2026 (7:30 AM) End Date: Tuesday, October 6, 2026 (4:30 PM) Arlington, Virginia Training/Professional Development • AGC EDGE Building Information Modeling Education Program Start Date: Tuesday, October 6, 2025 (11:00 AM)

End Date: Thursday, October 15, 2026 (7:00 PM) Online, Virtual Training/Professional Development • Construction Demo-Day: Project Management Date: Weds., October 7, 2026 (10:00 AM – 4:00 PM) • A GC EDGE Advanced Safety Management Training Course Start Date: Wednesday, October 7, 2026 (3:30 PM) End Date: Thursday, October 22, 2026 (8:00 PM) Online, Virtual Training/Professional Development •W ebinar: Deregulation Update: How We Are Doing and What Remains Date: Thursday, October 8, 2026 (2:00 PM – 3:00 PM) Training/Professional Development ebinar: Strategic Thinking: From Reactive Growth to •W Intentional Strategy A Four-Part Strategic Planning Series Date: Friday, October 9, 2026 (12:00 PM – 1:00 PM) Training/Professional Development • AGC Mental Health & Suicide Prevention Forum Date: Wednesday, October 14, 2026 Time: 2:00 PM to 3:00 PM Virtual Safety and Health • AGC EDGE Planning and Scheduling (STP Unit 3) Thursdays Start Date: Thursday, October 15, 2026 (10:00 AM) End Date: Thursday, October 29, 2026 (3:30 PM) Online, Virtual Training/Professional Development • AGC Collective Bargaining Training Start Date: Thursday, October 15, 2026 (12:00 PM) End Date: Friday, October 16, 2026 (3:00 PM Rosemont, Illinois • AGC EDGE Project Manager Development Program Start Date: Monday, October 19, 2026 (9:00 AM) End Date: Friday, October 30, 2026 (3:30 PM) Online, Virtual Training/Professional Development CONSTRUCTION MANAGEMENT ASSOCIATION of AMERICA (CMAA) CMAA2026 Start Date: Sunday, October 4, 2026

All items sell where they sit. 10% buyers premium applies. 866.608.9283

purplewave.com

End Date: Tuesday, October 6, 2026 Location: Gaylord Rockies Resort & Convention Center 6700 N. Gaylord Rockies Boulevard Aurora, CO 80019 This venue is part of the Gaylord Rockies Resort & Convention Center Complex which is a major convention facility in the Denver Metro area. ABOUT US The Construction Management Association of America (CMAA) is an industry association dedicated to the practice of professional construction management. CMAA was formed in 1982 to establish standards for managing construction projects. Today, CMAA has more than 28,000 members including individual professionals, professional service companies, and construction owners in the public and private sectors, as well as academic and associate members. CMAA has 34 chapters across the country. CMAA is dedicated to career-long education and professional development. Experience Shared. Construction Delivered. CMAA2026 is CMAA’s flagship event. It will include a comprehensive expo hall, plenary and breakout sessions, and the annual CMAA Industry Recognition Awards where 2026 CMAA Project Achievement Awards and other individual honors will be presented. CMAA2026 will feature: • Education for professionals at all career stages • Sessions that deliver practical, how-to applications with clear takeaways • Programs that challenge conventional thinking and spark new ideas • Learning that strengthens innovation, resiliency, and leadership performance For more information and to register visit: Website: https://www.cmaanet.org NATIONAL ELECTRICAL CONTRACTORS’ ASSOCIATION (NECA) NECA 2026 CONVENTION & TRADE SHOW START DATE:SUNDAY, OCTOBER 4, 2026 END DATE: WEDNESDAY, OCTOBER 7, 2026 VENUE: MANDALAY BAY CONVENTION CENTER 3950 LAS VEGAS S. BOULEVARD LAS VEGAS, NEVADA 89119

Events are subject to change, check websites for updates

Event Overview The National Electrical Contractors Association (NECA) is celebrating 125 years of leadership, innovation, and impact in the electrical construction industry. The 2026 show will feature: • 125th Anniversary Experience • Industry Solution Center • Education & Workshops Dates & Schedule • BOG (Business Opening Group) Sunday, October 4, 2026 • Main Show Monday, October 5 (11:30 AM – 5:00 PM) Tuesday, October 6 (11:30 AM – 4:00 PM) Wednesday, October 7 (9:00 Am – 1:00 PM) Who Attends? • T housands of electrical construction decision-makers from across the U.S. and internationally • A ttendees represent a wide range of roles, from large to small electrical construction firms Why Attend? • See and purchase the latest products and services • Network with industry leaders and peers • Access exclusive product demonstrations and training • Experience NECA’s 125-year legacy and future vision ABOUT CONVENTION Registering for NECA 2026 Las Vegas: It Makes Perfect Business Sense Where else can you participate in educational sessions geared to the needs of NECA Contractors, connect with manufacturers and service providers you rely on, and meet up with your fellow contractors? Only at NECA 2026 Las Vegas! For more information: National Electrical Contractors Association (NECA) Washington, DC 20004 Phone: 202/991-6318 Email: meetings@necanet.org

Page 54 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT.................................................................18 AMULET..........................................................................................46 ASTEC KPI-JCI...............................................................................36 BARGAINS........................................................................................6 BEDROCK MACHINERY...............................................................45 BOBCAT COMPANY........................................................................7 BOBCAT INDUSTRIAL...................................................................27 CEG SCALE MODELS...................................................................14 CONDUIT SEARCH GROUP.........................................................26 CONSTRUCTION EQUIPMENT GUIDE....................... 20,24,38,49 EAGER BEAVER TRAILERS.........................................................46 ESCO WEIR...................................................................................47 FAE USA INC..................................................................................37 FELLING TRAILERS......................................................................23 FLUID CONTROL SERVICES.......................................................15 GEHL...............................................................................................30 GROVE CRANES...........................................................................13 HENDRIX RENTALS LLC................................................................3 HITACHI EXCAVATOR...................................................................31 HYDRAULICIRCUIT TECHNOLOGY............................................46 HYUNDAI CONSTRUCTION EQUIPMENT.............................10,11 JAMES G MURPHY CO MARYSVILLE WA 10/1-8/2026.............................................51 JOHN DEERE.................................................................................19 KIRBY-SMITH MACHINERY INC...................................................56 KLEEMANN....................................................................................34 KOBELCO CONSTRUCTION MACHINERY ................................55 KOMATSU AMERICA CORP....................................................40,41 LANDMARK EQUIPMENT AN EQUIPMENT.............................6,49 LINK-BELT EXCAVATORS........................................................28,29 MAC TRAILER ENTERPRISES.....................................................25 METSO USA INC............................................................................35 NATIONAL EQUIPMENT DEALERS (NED)....................................2 POWERSCREEN OF TEXAS..........................................................5 PURPLE WAVE INC ONLINE/NO RESERVE AUCTION 10/8/2026......................53 ROAD BUILDERS MACHINERY & SUPPLY CO............................9

SAKAI SOIL....................................................................................39 SANY AMERICA INC........................................................................6 SCHWEISS HYDRAULIC & BIFOLD DOORS..............................15 THUNDER CREEK.........................................................................22 WEILER GRADER..........................................................................43 PACIFIC NORTHWEST SUPPLEMENT COLUMBIA WESTERN MACHINERY...........................................12 CONSTRUCTION EQUIPMENT GUIDE.........................................9 GORILLA HAMMERS.......................................................................1 JET CITY EQUIPMENT....................................................................3 MODERN MACHINERY...................................................................2 N & S TRACTOR..............................................................................5 SAKAI AMERICA INC.....................................................................11 TRIAD MACHINERY........................................................................7 TEXAS SUPPLEMENT BANE MACHINERY.......................................................................20 BOTTOMLINE EQUIPMENT LLC..................................................19 CLOSNER EQUIPMENT CO INC..................................................10 COMPACT CONSTRUCTION EQUIPMENT ..................................5 CONSTRUCTION EQUIPMENT GUIDE.......................................17 EAGER BEAVER TRAILERS...........................................................7 GOMACO CORP............................................................................10 GORILLA HAMMERS.......................................................................1 HIGH TECH INDUSTRIES...............................................................1 J & B PAVELKA INC.......................................................................19 KIRBY-SMITH MACHINERY INC.....................................................2 LSR EQUIPMENT ENTERPRISE..................................................14 NIECE EQUIPMENT......................................................................11 NUECES POWER EQUIPMENT................................................9,14 PIRTEK...........................................................................................13 ROCKY HILL EQUIPMENT RENTALS..........................................10 TROPHY TRACTOR LLC.................................................................3 VERMEER OF TEXAS-LOUISIANA..............................................15

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 20, 2026 • Page 55

EXPECT MORE FROM YOUR EXCAVATOR KOBELCO machines lead the field on performance specs for power and fuel economy while providing unrivaled operator comfort – all so you can get more done each day than you ever thought possible. Plus, they’re all backed by the service and parts support of the powerful KOBELCO dealer network. Visit your local KOBELCO dealer to find the model built to help you Get More Done.

BANE MACHINERY, INC. APCO Equipment

3432 N 5th Street North Las Vegas, NV 89032 702-871-7474 www.apcoequipment.com

2449 Manana Drive Dallas, TX 75220 214-352-2468 Tyler, TX 903-597-6641 Fort Worth, TX 817-847-5894 www.banemachinery.com

Scott Equipment 14635 Valley Blvd. Fontana, CA 92335 909-822-2200 800-316-0327 43136 Rancho Way Temecula, CA 92590 951-355-3085 www.scottequip.com

TRI-WEST TRACTOR 6281 Southfront Rd. Livermore, CA 94551 925-455-8200 5700 88th Street Sacramento, CA 95828 916-553-8630 www.triwesttractor.com

Page 56 • September 20, 2026 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby-Smith Machinery has one of the largest and most diverse rental fleets in the region. • Large Fleet of current model equipment • Rentals available by the week, month or longer • Low weekly and monthly rates • Specialized Equipment & Support – Paving, Crushing, Material Handling, Demolition and more! • Smart Construction and Intelligent Machine Control equipment Follow us on

kirby-smith.com Abilene 325.692.6334

Amarillo 806.373.2826

Chico 940.678.5046

Dallas 214.371.7777

Ft. Worth 817.371.777

Lubbock 806.745.2112

Odessa 432.333.7000

Hewitt 254.261.1370

Oklahoma City 405.495.7820

Tulsa 918.438.1700

McAlester 918.310.1550

Kansas City 913.850.6300

St. Louis 314.729.0125

Van Alstyne 469.329.3280