Issuu

$3.00

Published Nationally ®

Western Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.” January 14, 2012 • Vol. VIII • No. 1 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

Oftedal’s fleet of excavators work on the digging and rock placement for a shear key used in slide stabilization.

New Expressway Debuts in Oklahoma City By Sean Murphy

Case Donates Skid Steer to Iowa Col lege...16

Komatsu Launches New Articulated Truck...30

ASSOCIATED PRESS

Highway to Yellowstone Gets Needed Makeover By Jennifer Rupp CEG CORRESPONDENT

Since the mid-1960’s, at least two million tourists have visited Yellowstone National Park each year. Many of these sight-seers enter the park from the south, using U.S. 26/287 in Ritchie B ros. Holds Sale in Ft . Worth...36

Table of Contents ................4 Attachment Section ....13-15 Crushing, Screening & Recycling Section ........25-28 Truck & Trailer Section30-31 Auction Section ..........34-37 Business Calendar ............35 Advertisers Index ..............38

Wyoming. In 2006, the Wyoming Department of Transportation (WYDOT) began a 38-mi. (61.2 km) rehabilitation project on this highly trafficked stretch of highway. The project was divided into five segments, with a total of four contracts. Rosie’s Ridge, a 6.6-mi. (10.6 km) section of U.S. 26/287 from see YELLOWSTONE page 10

OKLAHOMA CITY (AP) Traffic began to flow Jan. 5 on the new Interstate 40 crosstown expressway in Oklahoma City, a roughly $680 million road project that is the most expensive in the state’s history. A caravan of antique cars and tractor-trailers from Oklahoma-based businesses christened the 4 mi. (6.4 km), 10-lane section of highway south of downtown that connects the three major interstates that run through the state — Interstates 35, 40 and 44. “This is fantastic news for Oklahoma and for the nation as we complete work on the corridor connecting the east and west coasts,” said Gov. Mary Fallin. “Completing the I-40 crosstown gives our infrastructure a big upgrade and helps to support a positive see OPENING page 18

United Rentals to Acquire RSC in $4.2B Deal United Rentals Inc. and RSC Holdings Inc. entered into a definitive merger agreement under which United Rentals will acquire RSC in a cash-and-stock transaction valued at $4.2 billion, including $2.3 billion of net debt. Both boards of directors unanimously approved the proposed transaction and recommended that their respective stockholders also approve it. The transaction will be financed with 60 percent cash and 40 percent stock. Each outstanding share of RSC common stock will be converted into the right to receive $10.80 in cash and 0.2783 of United Rentals share. United will issue new debt and draw on current loan facilities to finance the cash portion. Once completed, the company will be 70 percent owned by United Rentals shareholders. United estimates synergies from combining

the companies of more than $200 million annually, which they expect to realize within the first two years. Combining the companies will create a leading North American equipment rental company with a more attractive business mix, greater scale and enhanced growth prospects. The combination also is expected to accelerate United Rentals’ growth with industrial customers as well as provide a lower cost base and a less volatile revenue profile to better position the company through all phases of the business cycle. The new United Rentals is well-positioned to benefit from increased rental penetration, the continued strength of the industrial sector, serving customers across a variety of industries and a recovery in construction activity, according to the companies.

Michael Kneeland, president and chief executive officer of United Rentals said, “This transaction marks a transformative moment in our company’s history. Combining the experience and resources of two top performing equipment rental companies creates an exceptional company. The new United Rentals will build upon the best practices and management teams from both companies to deliver superior customer benefits and enhanced value for our stockholders. With the best talent in the industry, we have a tremendous opportunity to become the supplier of choice for customers throughout North America.” Erik Olsson, RSC’s chief executive officer and president, said, “RSC has a strong track record of profitable growth and we are proud of see DEAL page 12

Page 2 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Y O U R S TA N D A R D S A R E N O T O P T I O N A L .

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industy acclaimed • 100% Made in USA

A dirty, dusty job isn’t soo bad when you’ve got room to breathe. athe. In fact, it’s pretty nice with Bobcat’s unique, curved door pocket and one-piece seal. They provide a best-in-class, pressurized environment that keeps dust to a minimum. From startup to shutdown, you stay clean and comfortable. We think you’ll approve. There’s only one manufacturer with standards as high as yours. Find out more at www.growneyinc.com

Au thor ized Bobc at De aler

Tom Growney Equipment, Inc. w w w.gr ow neyinc.com

2 3 0 1 C a n d e l a r i a Ro a d N . E . A lbuquerque, NM 87197 505-88 4-2900 Fa x : 505-8 8 4 -879 0

110 0 Troy K ing Road Farmington, NM 8749 9 505-326-1101

240 0 West Bender Hobbs, NM 8 8241 505-392-692 3

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

11323 Rojas E l P a s o, T X 7 9 9 3 7 915-598-113 3

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 3

2005 Komatsu D65PX-15, Stk# 7703, EROPS, A/C & Heat, Stereo, Sweeps, Rear & Side Screens, St/Tilt Blade, 9957 Hrs, 90% U/C, 36” Pads, 13’ Blade .....................................$69,500

"In Business for over 29 Years" www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2000 Ingersoll Rand SD40, Stk# 7655, 54” Pad Español Drum, 2601 Hrs, 12.4x24 Tires @ 50%, 4 Cyl. J Deere Eng...............................................$17,500

2005 Boxer Compact Track, Stk# 7186, 605 Hrs., 44” Bucket, 9” Rubber Tracks, Aux. Hyd, Perkins Diesel Eng. ...............................$14,500

2005 Gehl RS6-XR42, Stk# 7718, OROPS, 6,000 lbs., 42 ft., 3,405 hrs., 4WD, 4WS, Hyd. Leveling System, 48" Forks, 48" Tilt Frame, 13.00 x 24 Foam Fill Tires @ 80%, 4 Cyl. JD Eng.....$24,500

1984 Cat D3B LGP, Stk# 7521, OROPS, Sweeps, Rear Screen, 70% U/C, 6 Way Blade, 2,123 hrs., 25” Pads, 10’2” Blade .............................$18,500

2008 Volvo SD100DC, Stk# 7681, 84" Smooth 2005 John Deere 700H LGP, Stk# 7416, EROPS, 2007 I-R SD70D, Stk# 7710, 66" Smooth Vib. 2005 Amida AL4060D1-4MH, Stk# 7678, 9122 A/C, Sweeps, Rear Screen, 6 Way Blade, 85% U/C, Drum, OROPS, 193 hrs., 80% Tires, 4 Cyl. Drum, 160 hrs., 90% Tires, 4 Cyl. Cummins Eng., 23.1x26 Water Tires.....................$69,500 4,384 hrs., Winch, 30" Pads, 11’ Blade....$72,500 Cummins Eng, 14.9x24 Water Filled Tires $38,500 Hrs, 3 Cyl. Kubota Diesel Eng ..................$4,500

2006 Ditch Witch RT40, Stk# 7602, 821 hrs., 60% Tires, Side Shift, 26x12 Tires, 3 Cyl. Duetz Eng ........................................................$12,500

2005 Cat D6N XL, Stk# 7569, EROPS, A/C, Sweeps, Rear Screen, 6-Way Blade, 70% U/C, 4318 Hrs, Allied Winch, 22” Pads, 10’8” Blade ... .............................................................$129,000

2011 John Deere 650J LT, Stk# 7618, OROPS, Sweeps, Rear & Side Screens, 6 Way Blade, 80% U/C, 782 hrs., 18" Pads, 8' 9" Blade.........$86,500

2006 Cat D6N XL, Stk# 7579, EROPS, A/C, FM Radio, 6 Way Blade, 4,433 hrs., 80% U/C, 24" Pads, 10' 8" Blade ...............................$119,500

1997 Bobcat 763, Stk# 7700, OROPS, 1,446 hrs., 60% Tires, 67" Bucket, Aux. Hyd., 10Rx16.5 Tires, 4 Cyl. Kubota Eng.....................................$8,500

2006 John Deere 650J LGP, Stk# 7662, OROPS, Sweeps, Rear & Side Screens, 6 Way Blade, 1,171 hrs., 50% U/C, 28" Pads, 10' 1" Blade.......................................................$46,500

1999 Champion Volvo 730A, Stk# 7315, EROPS, A/C, 5,734 hrs., Rear Ripper, 12 ft. M/B w/Slide & Tip Control, 6 Cyl. Cummins Eng., 1996 Odom Flat Bed Trailer, Stk# 7651, 20,000 14.00x24 Air Filled Tires .......................$59,500 GVWR, 7.50x16CT Tires...........................$4,500

2008 John Deere 350D LC, Stk# HR-67, EROPS, A/C, 4,669 hrs., 80% U/C, 48" Bkt, Aux. Hyd., 32" Pads, 11’2” Wide .................$149,500

1997 Dynapac CA121PD, Stk# 7572, 54” Pad Drum, 806 Hrs, 80% Tires, 3 Cyl. JD Eng .......... ..............................................................$16,500

2001 Cat 980G, Stk# 7737, EROPS, A/C, FM Stereo, 80% Tires, 3 yard 2 ft. Bucket, 29.5Rx25 Tires, 11 ft Wide, 12' 6" Height ..............$129,500

2005 Bobcat 325G, Stk# 7615, OROPS, 2873 2004 Cat D6R LGP, Stk# 7724, EROPS, A/C, Sweeps, Rear Screen, St./Tilt Blade, 6,474 hrs., Hrs, Quick Connect 16” Bkt, Aux. Hyd, 55” Blade, 1988 Kobelco K916LC, Stk# 7453, EROPS, 90% 80% U/C, 3 Shank Rear Ripper, 36" Pads, 13 ft. 13th Rubber Tracks, @ 70%, 3 Cyl. Kubota Eng. U/C, 60" Bucket w/Teeth, 36" Pads, 12 ft. Wide.. 2000 JLG 600S, Stk# 7308, 60’, 4WD, 1477 Blade ...................................................$129,500 ...............................................................$14,500 ..............................................................$26,500 Hrs, Certify Rebuilt 2006, Diesel ...........$16,500

2006 Kubota KX41-5, Stk# 7653, OROPS, 1318 Hrs, 80% U/C, Aux. Hyd, 16” Bkt, 51” Blade, 9” Rubber Tracks, 3 Cyl. Kubota Eng..........$13,500

2007 ASV RC100, Stk# 7595, Posi Track, EROPS, A/C, 700 hrs., w/Loftness Mulching 2008 Komatsu PC200LC8, Stk# 7543, EROPS, Head & Bucket, Aux. Hyd., 18" Rubber Tracks @ A/C, 3,189 hrs., 70% U/C, 42" Bucket, 32" Pads, 80%.......................................................$46,500 10' 6" Wide...........................................$109,500

2005 Pettibone 8044, Stk# 7525, 8000 Lbs, 44’, 4297 Hrs, 4WD, 4WS, 40$ Air Tires, 48” Forks, Hyd. Leveling System, 4 Cyl. Cummins Eng, Wt. 25,100 Lbs, 8’6” Wide ..........................$24,500

1959 Cat D8H, Stk# 7682, OROPS, Sweeps, St/Tilt Blade w/Hyd Tilt, 80% U/C, 630 Hrs, Winch ....................................................$18,500

2001 Traverse T844, Stk# 7709, 8000 Lbs, 44’, 3636 Hrs, 4WD, 4WS, 13.00x24 Tires @ 50%, 2006 John Deere 650J LGP, Stk# 7657, HYSTAT, OROPS, Eng. Encl, 6-Way Blade, 4806 Hrs, 70% Clubcar XRT1500G, Stk# 7732, 4WD, 838 hrs., 60% Forks that Level, 48” Wide Frame, Aux. Hyd........................................................$18,500 U/C, 27” Pads, 10’9” Blade ....................$38,500 4WD, Honda Gas Eng., 23x10.50 Tires ...$3,750

Cat D6N LGP, Stk# 7635, OROPS, Rear Screen, 2008 Daewoo S140LC-V, Stk# 7671, EROPS, E/C, Sweeps, 6-Way Blade, 3779 Hrs, 80% U/C, 1,747 hrs., 42" Bucket w/Thumb, 28" Pads, 6 Cyl. Plumbed for Ripper w/Control, Rear Draw Bar, 34” Doosan Eng., 8' 11" Wide.........................$49,500 Pads, 13’3” Blade .....................................$99,500

2006 Komtasu PC300LC-7L, Stk# 7725, 2003 JLG G9-43A, Stk# 7459, OROPS, 9,000 lbs, 2007 John Deere 450J LGP, Stk# 7704, OROPS, EROPS, A/C, 5,360 hrs., 80% U/C, Aux. Hyd., 43 ft., 3,933 hrs., 20% Hard Rubber Tires, 48" Tilt Sweeps, Eng. Encl, 6-Way Blade, 2983 Hrs, 24” 54" Bucket, 34" Pads, 11' 4" Wide..........$97,500 Forks, 4 Cyl. JD Eng ................................$34,500 Pads, 9’7” Blade .....................................$42,500

Page 4 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION Circulated Throughout •Alaska •Arizona •California •Colorado •Hawaii

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

STRIKER HYDRAULIC BREAKERS PRESENTS NEW TNB SERIES

The TNB series breakers incorporate a very low backpressure and are not sensitive to system back pressures, which allows for a wide variety of carriers.

CASE DONATES SKID STEER TO NORTHWEST IOWA COLLEGE

Roger Solberg, heavy equipment operations and maintenance instructor at NWICC, said the program’s 25 students will begin using the machine during the upcoming semester’s studies.

GILBANE CONSTRUCTION INDUSTRY ECONOMIC REPORT FORESEES ONGOING CHALLENGES

Based on an array of economic data, construction starts and material cost trends, this free report projects that the recovery of the construction market will lag behind the overall economic recovery.

25 30

RAPTOR PORTABLE CONE PLANTS MEET CRUSHING NEEDS

Founder, Publisher & CEO Vice President Emeritus Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr.

Edwin M. McKeon Sr. Hal Ewing Edwin M. McKeon Jr. Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 Toll Free Fax Web site Editorial e-mail Advertising e-mail

215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

For advertising rates: Contact Edwin M. McKeon Jr. National Sales Manager 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com Contact Dale Agnew

•Arizona •Colorado •New Mexico •Oklahoma •Texas •Wyoming

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com

GRASAN MOBILE SCREEN PLANTS AVAILABLE IN SUNDRY SIZES

Contact Frank Strazzulla

KOMATSU AMERICA LAUNCHES HM400-3 ARTICULATED TRUCK

With the introduction of the Komatsu CARE Program, every Komatsu Tier IV Interim construction machine comes standard with complimentary factory scheduled maintenance.

•Oregon •Texas •Utah •Washington •Wyoming

Working with preferred chassis and screen manufacturers, FLSmidth’s engineers can custom-design a portable wheel-mounted plant, based on customers’ unique applications.

Grasan plants can be custom designed to work with varying quarry layouts or existing equipment and optional blending gates and various cross belt configurations are available.

•Idaho •Montana •New Mexico •Nevada •

Oklahoma

RITCHIE BROS. HOLDS SALE IN FT. WORTH

Highlights from the sale included a pair of 2005 Caterpillar 631G motor scraper that sold for an auction high $375,000 a piece.

32 CLASSIFIEDS 34 COMING AUCTIONS 35 BUSINESS CALENDAR

EQUIPMENT… 26 GEO-BOY Brush Cutter

•Alaska •California •Hawaii •Nevada •Oregon •Utah •Washington

949/459-1767 Fax 949/203-2859 e-mail fstrazzulla@cegltd.com Contact Patrick Kiel

•Idaho •Montana

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com Construction Equipment Guide Western Edition (ISSN 306-484) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 5

CONTACT: Dallas, Texas Chris Spainhour

TOLL FREE: 800-489-1422

E m a i l : s o l i d a @ c h a r t e r. n e t

w w w. s o l i d a - w e r k . c o m

Fax: 214-630-5419 Cell: 817-714-7176 (CERTIFIED IN GERMANY)

Page 6 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER

KOMATSU D65EX-15

Made in the USA

Tough economic times call for a preventive approach to equipment maintenance. Extend your maintenance budget and the life of your cylinders with the SEAL SAVER protective cylinder cover. Resistant to heat, oil, chemicals and water, the SEAL SAVER will help protect seals and cylinder rods from premature failure. This unique preventive maintenance tool attaches easily and securely to the rod and cylinder head – usually in fifteen minutes or less – with no disassembly of the cylinder required.

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling and Wood Products industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 • Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

www.sealsaver.com

Visit for more information or contact us at 1-800-683-5189

The race to the finish is shorter than ever. They say speed kills. But for grading, speed and accuracy win. You win more jobs, you beat more deadlines. Topcon 3D-MC2 revolutionized dozer grading performance. Now available for motor graders, your high-precision blade is super charged to give you speed and accuracy that can more than double your productivity.

TWICE AS FAST, TWICE AS ACCURATE

SEE FOR YOURSELF

Central Hall: Booth C5070

It’s not just for dozers anymore.

topconpositioning.com/seeforyourself

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ January 14, 2012 â€˘ Page 7

ÂŠÂ•Â•Čą Â˜ÂžÂ? Call DougČąČŚ/Čą ÂŠÂ&#x;ÂŽÇąČąČą Sam: (866) 485-7180

2007 Komatsu D65EX-15; #81435, Cab/AC, Sweeps, Rear & Side Screens, 1700 Hrs............ ............................................................$179,500

Finn T60; #81550, 25hp Kohler Engine, 600 Gallon Tank, 800 Hrs ............................$17,500

2007 Komatsu WA250-5; #81402, Cab/AC, QC/3 Yd Bkt, 3rd Valve, 3100 Hrs ......$109,500

1999 Volvo A40; #91495, 40 Ton Truck, Rebuilt Transmission ........................................$79,500

2000 Cat IT38G; #81555, QC/Bkt/48â€? Forks, 3rd Valve, 10,400 Hrs..................................$59,500

2003 Komatsu D65PX-15; #80775, Cab/AC, 36â€? Shoes, Drawbar, 5400 Hrs............$129,500

2006 Cat 963C LGP; #81423, Cab/AC, GP Bkt w/Teeth, 2100 Hrs ..............................$119,500

1993 Komatsu PC300LC-5; #91561, 33.5â€? Tracks, 13â€™ Arm, JRB QC ......................$51,000

2005 Komatsu PC228USLC-3; #81385, Cab/AC, Aux Hyd, 2475 Hrs..............................$129,500

2005 Deere 410G; #81583, Cab/AC, Ext-A-Hoe, Aux Hyd, 900 Hrs..................................$67,500

2007 Komatsu D39PX-21; #81560, A/C, 25â€? Shoes, Sweeps/Rear Screen, 3350 Hrs $59,500

2002 Komatsu CD60R-1; #81226, Roadliner Tracks, 2600 Hrs ..................................$79,500

Page 8 â€˘ January 14, 2012 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

BAYONET

1-800-427-7368

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM

COMPLETE

Covered By One or More of the Following US Patents:

CONSTRUCTION

POWER

US 6,430,849 B1 US 6,751,896 B2 US 7,117,618 B2 US 7,257,910 B2

We rent complete power giving you the competitive edge with the best: GENERATORS, LIGHTING, ELECTRICAL DISTRIBUTION & MUCH MORE IInstantly nstantly b boost oost productivity productivit y and and conserve conser ve your your budget bud get now! now! Our Our dedicated dedicated local local service service provides provides RXWVWDQGLQJ VXSSRUW DQG GHSHQGDELOLW\ R XWVWDQGLQJ VXSSRU W DQG GHSHQGDELOLW \

...

www.Bayonetbreaker.com View at YouTube/Bayonet Breaker Go from Excavating to Hammering in 3 seconds. Fits most models of Backhoes and Excavators

Certified Master Distributor for Bayonet Products

reliable re lia b l e Â‡ m mobile obil e Â‡ c convenient onveni ent

Dallas/Ft. D a l la s/ F t . W Wor o r tth h Area Area 101 Industrial 101 Industrial Blvd. Blvd. 40.5544 4 0. 5 5 44 0DQVÂżHOG 7; 0 DQVÂżHOG 7; @ salessa l e s - df w c cliffordpower l i f f o r d p o we r.c .com om serr vice se vi c e - df w @ c cliffordpower l i f f o r d p o we r.c .com om

www..c www cliffordpower li f fordpower..com com C25325$7( C 25325$7( H HQ Q Â‡ ( Â‡ (. th St. No North rth Â‡ 7XOVD Â‡ 7XOVD 2. 2.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 9

Link-Belt 3200 All Terrain Crane 1:50 Scale $195

Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale............$75 Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200 Allis-Chalmers 45 Motor Grader, 1:50 Scale ..............$100 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$70 Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70 Bantam Shovel Mounted on a White Truck, 1:50 Scale$95 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader..............................................................................$45 Bobcat S175 Skid Steer Loader, 1:50 Scale ................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale ................................................................$65 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$50 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$90 Case Conrad 580 Super R Backhoe, 1:50 Scale ........$175 Case CX210B Excavator, 1:50 Scale ............................$35 Case 330B Articulated Truck, 1:50 Scale......................$35 Case 621E Wheel Loader, 1:50 Scale............................$35 Case 1850K Dozer, 1:50 Scale ......................................$40 Caterpillar 4-Piece Earthmover Set, 1:64 Scale ..........$90 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$65 Caterpillar AP655D Paver, 1:50 Scale ..........................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar D6T XW Track-Type Tractor ........................$70 Caterpillar D8R Track Type Tractor, 1:50 Scale............$55 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$85 Caterpillar 140H Motor Grader, 1:50 Scale ..................$50

Poclain 350CK Excavator 1:50 Scale, Conrad $165

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Caterpillar 416 Backhoe/Loader, 1:50 Scale ................$75 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$70 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $40 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$75 Caterpillar 785D Mining Truck, 1:50 Scale..................$145 Caterpillar 906H Compact Loader, 1:50 Scale..............$40 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $45 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$65 Caterpillar 963D Track Loader, 1:50 Scale....................$60 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$65 Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$80 Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$55 Gradall XL4300II Excavator, 1:32 Scale ........................$80 Grove GMK 4115L Truck Crane, 1:50 Scale................$250 Hamm 3307 Compact Roller, 1:34 Scale ......................$60 Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$30 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$65 International TD-24 Military Dozer, 1:50 Scale ............$50 International 350 Payhauler, 1:25 Scale......................$285

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

JCB 3CX Backhoe Loader, 1:50 Scale ..........................$55 JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$85 John Deere 200D LC Excavator ....................................$45 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale ..$35 John Deere 772CH Motor Grader, 1:50 Scale ..............$35 John Deere 850J Crawler Dozer, 1:50 Scale ................$40 Komatsu D51 EX Dozer, 1:50 Scale ..............................$65 Komatsu D51 PX Dozer, 1:50 Scale ..............................$65 Komatsu D375 Dozer, 1:50 Scale ..................................$90 Komatsu GD655 Motor Grader, 1:50 Scale ..................$85 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$85 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$80 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$235 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$45 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$45 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$65 Komatsu WA470 Wheel Loader, 1:50 Scale..................$75 LBX 210 X2 Excavator, 1:40 Scale ................................$75 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ....$175 LeTourneau Super C Scraper w/Cab, 1:50 Scale ........$80 LeTourneau Military Super C Scraper, 1:50 Scale ......$50 Northwest 25-D Backhoe, 1:50 Scale ............................$85 Northwest 25-D Shovel, 1:50 Scale ..............................$70 Terex PPM AC40/2L ATC, 1:50 Scale ..........................$190 Terex RT130 RTC, 1:50 Scale ......................................$160 Vogele Super 700 Small Paver, 1:50 Scale ..................$75 Volvo A25D Articulated Truck, 1:50 Scale ....................$75 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$50 Volvo L90E Wheel Loader, 1:50 Scale ..........................$75 Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$85

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 10 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Road Widening, Passing Lane Additions Highlight Project YELLOWSTONE from page 1

milepost 7.83 to 14.47, is the last of the five segments to be completed. Work on Rosie’s Ridge began in May 2011 and will be finished by July 2013. This scenic stretch of roadway in Teton County lies between the cities of Dubois and Jackson. On either side, the highway is surrounded by forests — the Teton National Forest to the north, and the Gros Ventre Wilderness to the south. Yellowstone National Park is located about 28 mi. (45.1 km) northwest of the project. Oftedal Construction Inc. is heading up the project out of its Casper, Wy., office. The work includes road widening, construction of additional passing lanes and parking areas, a bridge replacement and the construction of an arch culvert. Oftedal specializes in highway and road construction, site preparation, mine reclamation, and dam and dike construction. The company was founded in 1964 by E.H. (“Ed”) Oftedal and his son, Bill, in Miles City, Mont. It now serves multiple states and employs more than 250 people. Oftedal and a crew of about 100 employees are performing excavation and slide stabilizations. The crew has been staying in the Dubois area since the start of the job, boosting the local economy. “This segment of the project requires four major slide remediations,” explained Kaia Tharp, WYDOT project engineer. “A large portion of the project was dedicated to the slide areas, and because of the challenge that they pose, WYDOT chose this section to be completed last.” A total of 1,014,170 cu. yds. (775,434.4 cu m) of earth was excavated. All excess material is being moved onto two toe berms in conjunction with the slide remediations, along with 95,200 cu. yds. (72,790 cu m) of graded 1 to 6 in. rock. The Black Rock Creek Bridge, a two-lane, 138-ft. (42.1 m) structure was replaced under subcontractor Cannon Builders Inc. of Blackfoot, Idaho. Cannon also replaced a 24-in. (61 cm) pipe with a 42 by 23-ft. (12.8 by 7 m) arch culvert to accommodate the crossing of large local wildlife, including elk, moose, bears and deer in this wilderness area. The project calls for 296 cu. yds. (226.3 cu m) of concrete, and 42,000 tons (38,094 t) of asphalt.

The majestic Tetons are the backdrop for Oftedal’s excavation work.

Additionally, WYDOT worked with The Army Corps of Engineers for the replacement of 2.19 acres of wetlands that are part of the construction area. HK Contractors Inc. of Idaho Falls, Idaho, is in charge of paving the roadway, including the new passing lanes and parking areas. The passing lanes have been placed intermittently along the 6 mi. to relieve traffic congestion. To make way for the road widening, Wilcox Logging Inc., based in Rexburg, Idaho, was hired to cut trees along U.S. 26/287. Traffic control is in the hands of S&L Industrial of Cowly, Wyo. U.S. 26/287 also is the home to a section of the

This 42-ft. (12.8 m) wide arch was built specifically for passing wildlife with a small channel down the middle for drainage.

TransAmerica Trail, a well-known bike trail stretching 4,254 mi. from Astoria, Ore., to Yorktown, Va. The TransAmerica Trail was established for Adventure Cycling’s celebration of the U.S. bicentennial in 1976. At that time, the organization was called Bikecentennial, a name many old-timers still associate with the TransAm Trail. To accommodate the bike trail, 8-ft. (2.4 m) shoulders are being installed along Rosie’s Ridge. (www.adventurecycling.org) (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Cannon Builders pour the deck on Black Hawk Creek Bridge.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 11

8231 John W. Carpenter Fwy

Dallas, TX 75247

(888) 616-5991

2006 JCB 8027Z mini excavator with 10” rubber 2006 JCB 3CLL loader/backhoe with 6’ box blade and 4WD. EQ# FF000122, 1059.6 hrs ..........$29,000 track and 66” blade. EQ# 90954077, 782 hrs

2006 JCB JS260 excavator with thumb. Priced w/o Bucket. EQ# AA002602, 3,407 hrs..............$110,000

2006 JCB VM1500 trench roller with remote control. EQ# FF000133, 149 hrs ..................................$9,500

2006 JCB 8027Z mini excavator with 10” 2006 JCB 8027Z mini excavator with 10” 2008 JCB 8018X mini excavator with 9” 2007 JCB VM1500 trench roller with 2008 JCB 8018X mini excavator with 9” rubber track and 66” blade. rubber track and 66” blade. rubber track and 54” blade. remote control. EQ# 90888202, 350 hrs.... rubber track and 54” blade. ......................................................$16,000 EQ# 90987346, 140 hrs................$22,000 EQ# 90993138, 240 hrs................$22,000 EQ# 90954077, 281 hrs ................$22,000 EQ# 90949801, 517 hrs................$22,000

See full inventory at: www.DarrJCB.com

llu.ne www.a

scan for video

ALLU D-SERIES

Screener Crushers & Fine Screeners ALLU provides portable screening and crushing attachments that will crush, mix, stabilize, aerate and screen for pipelines, topsoil, compost, construction debris, contaminated soils, asphalt, mulch, salt, coal, sand, gravel, sludge, garbage, bio-waste, food waste, leaf mulch, glass, gypsum, pallets, lime & much more! ALLU Group, Inc. | Info Call: 1-800-939-2558 | Email: usa@allu.net

• High production even with wet muddy materials • 5/8” & 1” Fine screening size • 1-1/4” and up sizes with replaceable hammers

Page 12 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

United Rentals, RSC Deal: 60 Percent Cash, 40 Percent Stock OPENING from page 1

what we have built. At the same time, I am confident that by partnering with United Rentals we can accomplish far more than either company could have achieved on its own, including significant synergies. As a result, the transaction delivers significant value to our shareholders. Our similar customer-centric cultures and commitment to operational excellence will provide even greater value to our customers and facilitate a smooth integration. I look forward to helping to lead the integration process during a transition period.” Upon the close of the transaction, three of RSC’s independent directors will receive seats on United Rentals’ existing board of directors. Michael Kneeland, president and chief executive officer of United Rentals, and Jenne Britell, United Rentals’ chairman, will remain in their positions at the combined company.

BEE EQUIPMENT SALES LTD. 2506 Slaton Highway Lubbock, TX 79404 806/745-1511 Fax: 806/745-1542

Transaction Highlights Upon the closing of the transaction, each outstanding share of RSC common stock will be converted into the right to receive $10.80 in cash and 0.2783 of a share of United Rentals common stock, subject to the terms and conditions of the merger agreement. The transaction provides immediate value to RSC stockholders through the cash component, as well as continued participation in future value creation of United Rentals through their ownership of approximately 30 percent of United Rentals on a fully diluted basis. The price of $18.00 per share represents a 58 percent premium over RSC’s closing price as of Dec. 15, 2011. The cash portion of the transaction will be financed through new debt issuance and drawing on current loan facilities. United Rentals has obtained financing commitments from Morgan Stanley Senior Funding Inc., Bank of America Merrill Lynch and Wells Fargo in support of this transaction. By the end of 2012, the combined compa-

Would you like

YOUR COMPANY featured in Construction Equipment Guide?

If so, please contact us: 470 Maryland Drive, Fort Washington, PA 19034

800/523-2200

ny’s leverage ratio is expected to be in line with United Rentals’ previously stated target range of 3.5x — 4.5x. As a result, United Rentals expects to retain its current corporate credit ratings. United Rentals intends to re-pay the outstanding amounts on RSC’s existing Senior Secured Credit Facilities and Senior Secured Notes due 2017, and assume all of RSC’s existing unsecured debt. United Rentals’ Board also announced its intention to authorize after closing a stock buyback of up to $200 million of the company’s common stock. United Rentals’ current intention is to complete the stock buyback within 6 to 12 months after closing. The deal is expected to be accretive to United Rentals’ cash earnings per share in the first full year after closing. The transaction is anticipated to provide more than $200 million of annual cost savings through the elimination of redundant infrastructure, branches and overhead, two thirds of which are expected to be achievable within the first twelve months following the closing of the transaction. The combination also is expected to provide meaningful revenue synergies from the expanded footprint, in particular with national and industrial account relationships and provide additional cash flow upside through optimization of the combined fleet and capital expenditures. The proposed transaction is subject to the conditions of delivery of tax opinions and a solvency opinion as well as customary closing conditions, including approval by United Rentals and RSC stockholders, absence of a United Rentals and RSC material adverse effect and notification and clearance under certain antitrust statutes. United Rentals and RSC expect the transaction to close in the first half of 2012. Oak Hill Capital Partners has agreed to vote its 33.5 percent shareholding in RSC in favor of the transaction.

Attachments

SECTION

Pages 13-15

AIM Quick Couplers Fit OEM Striker Hydraulic Breakers Configured Attachments Presents New TNB Series AIM hydraulic quick couplers are for use with OEM configured attachments. The AIM couplers feature a simple design, in which no pin removal is needed for an easy exchange of a variety of attachments, making an excavator a multi-capable machine. This system eliminates hundreds of onsite man hours spent changing manually configured attachments, according to the manufacturer. Specific features include: • One-man operation, allowing the easy exchange of attachments. • No special modifications needed for attachments such as buckets, hammers, rakes or rippers.

• All couplers include a durable lifting hook. • Built-in safety check-valves help eliminate electrical fault and human errors that cause accidents. The cylinder will not disengage when pressure is lost in the hydraulic line. A warning buzzer for the cab also is standard. • Multi-position manual safety pin for added safety. These couplers were designed to minimize the negative effect on breakout force due to the increase in the tip radius dimension. For more information, call 800/8033365 or visit www.aimattachments.com.

Striker has a complete product offering of 17 breakers ranging from 100 to 12,000 ft./lb. class breaker.

No pin removal is needed for an easy exchange of a variety of attachments, making an excavator a multi-capable machine.

The TNB series of hydraulic breakers from Striker deliver enhanced impact energy, productivity and versatility along with low operating costs, according to the manufacturer. These benefits are due to a blend of simple yet efficient two moving parts design and advanced “accumulator free” technology. With Striker hydraulic flow through design is coupled with a cushion chamber design for shock damping, which cushions every blow. The TNB series breakers incorporate a very low backpressure and are not sensitive to system back pressures, which allows for a wide variety of carriers.

Striker has a complete product offering of 17 breakers ranging from 100 to 12,000 ft./lb. class breaker. The TNB series breakers are ideal for applications from primary/secondary breaker, road and bridge construction, demolition, mining, quarry, rental, landscaping and recycling. The TNB mini series breaker bracketing system can be moved from one machine to another with simple pin and bushing changes. A three warranty allows the customer more up-time and control of operation costs. For more information, visit www.toku-america.com.

Page 14 • January 14, 2012 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

CEA’s Edge Concrete Placing Breaker Technology (BTI) Debuts Buckets Work in Small Spots Hydraulic Breaker ‘Powerhouse’ CEAttachments Inc.’s Edge concrete Sizes available are, .5 and .75 cu. yd. (.3 placing bucket is designed to accurately, and .57 cu m) capacities. Standard features quickly and neatly carry and place concrete include a hydraulic gate control and a 30 in. in tight areas or locations that cannot support a cement truck. This specialty bucket precisely places concrete without the mess and is ideal for pouring concrete for backyard patios, pools or into formed columns or walls, according to the manufacturer. The Edge concrete placing bucket features squared-off corners and an easy-to-clean baked-on CEAttachments Inc.’s Edge concrete placing bucket is powder coat finish. It also designed to carry and place concrete in tight areas or locations that cannot support a cement truck. features a hydraulically controlled dispensing door that closes with a (76 cm) chute extension. tight seal for accurate, multiple placements For more information, visit www.ceatfrom the same load. tachments.com.

The BXR150 at 15,000 ft.-lbs., is designed for rugged, continuous duty for use in demanding breaking applications. It offers an extra long stroke design, which improves the power-to-weight ratio of the breaker, providing a wide carrier range (120,000 to 220,000 lbs. [54,431 to 99,790 kg]) and power available. Precise tolerances between the piston and cylinder provide high efficiency, blow rate and power, according to the manufacturer. Large cross section upper and lower shock absorbing isolators reduce vibration feedback to the carrier. BTI’s front head restraint system tightly guides the front head within the housing, reducing loading to the

tie rods and the upper portion of the breaker. A narrow box housing design is well suited to tight trenching conditions. The BXR150 has a working weight of 12,000 lbs. (5,443 kg), which may vary depending on bracket. Tool diameter is 8 in. (20 cm), flow range is 85 to 120 gpm (321 to 454 L) and operating pressure is 2,030 to 2,755 psi. The frequency range is 260 to 425 bpm in long stroke mode (high impact), 340 to 530 in short stroke mode (high frequency) — manually controlled via hydraulic piloted stroke control. For more information, call 951/369-0878 or visit www.rockbreaker.com.

Geo-Boy Brush Cutter Excels in Variety of Conditions

Slab Crab Makes Jobs Easy

The Slab Crab makes removal of concrete slabs and bridge decks a one-man job, according to the manufacturer. The contractor simply saw cuts the concrete into manageable slabs and picks them up. They can then be loaded directly onto the truck bed. A single operator can remove slabs cleanly, without disturbing sub-base. Slab Crab models can accommodate slabs ranging from 4 to 20 in. (10 to 51 cm) thickness. This bucket is available for excavators from 5,000 to 150,000 lbs. (2,268 to 68,039 kg), and models also are available to fit skid steer and backhoe machines. The Slab Crab is available as a direct pin-on or to accept the Kenco WedgeBolt Coupler System. For more information, call 800/653-6069 or visit www.kenco.com.

Jarraff Industries’ Geo-Boy Brush Cutter operates in all types of conditions, including remote access sites and challenging terrain. With the ability to lift the cutter head approximately 11 ft. (3.3 m) high, the Geo-Boy can quickly and effectively clear brush and trees up to 12 in. (30.5 cm) in diameter, according to the manufacturer. With two tier III engine options, 220 to 260 hp (164 to 194 kW), the Geo-Boy is powerful, maneuverable and fuel effecient. The low center of gravity provides a smoother ride and keeps the cutter head properly positioned in uneven territory. The new Geo-Boy also offers a number of safety features including full Lexan, No Mar windows and a rearview camera. For more information, call 800/436-2691 or visit www.geo-boy.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • January 14, 2012 • Page 15

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 1629 Vision Dr. Abilene, TX 79602 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977

3201 E Slaton Rd Lubbock, TX 79404 866/289-6087

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

Page 16 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case Donates Skid Steer to Northwest Iowa College

Roger Solberg (L), heavy equipment operations and maintenance instructor of Northwest Iowa Community College, accepts the donation of a cutaway training model of a Case skid steer loader while presenting a plaque of appreciation to Russ Wadzinski, general manager of the Case Customer Center, Tomahawk, Wis.

Doosan Delivers

PRODUCTIVITY Doosan equipment is a sure thing when you’re working on demanding jobsites. Best-in-class hydraulics deliver ample power to the arm and bucket for digging, loading trucks and more. And its advanced hydraulic pumps deliver fast, profitability-boosting cycle times. If you want to move material faster and more efficiently, DOOSAN DELIVERS. Contact your local Doosan dealer for more information. Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2012 Doosan Infracore Construction Equipment America. All rights reserved. | 1211358

Authorized Doosan Dealers

CALIFORNIA

TEXAS

UTAH

Bejac Corporation

R.B. Everett & Co.

Mesco Inc.

Placentia 714-528-6224

Arlington 817-299-0010 Pasadena 281-991-8161

North Salt Lake ŧşŠǍŨŢťǍŢŧŨş ì ŧşş ŢŨŦǍŠťšŨ

bejac.com

RGW Equipment Sales, LLC Livermore 925-606-2450

rbeverett.com

rgwequipmentsales.com

Texas Timberjack, Inc.

OKLAHOMA

Lufkin 936-634-3365 Jasper 409-384-4611

H & E Equipment Services Tulsa 918-445-2666 Oklahoma City 405-789-7368 he-equipment.com

texastimberjack.com

doosan.mescoequipment.com

Case Construction Equipment recently donated a cutaway training model of a Case skid steer loader to the heavy equipment operation and maintenance program at Northwest Iowa Community College in Sheldon, Iowa. Roger Solberg, heavy equipment operations and maintenance instructor at NWICC, said the program’s 25 students will begin using the machine during the upcoming semester’s studies, including breaking down, re-assembling and re-installing the engine. “We’ll have a new shop next year, and we’re setting up a special area just for the Case machine,” Solberg said. Case had been using the machine for training at its Tomahawk Customer Center in Tomahawk, Wis. Solberg arranged the donation during a three-day visit with his students to the Tomahawk facility earlier this year. “We appreciate the support Case provides to our program. We’re especially grateful to Russ Wadzinski, the general manager at Tomahawk, who offered us the skid steer cutaway. Russ and his team gave us good advice and ideas to incorporate into our facilities and classes. Case provides a great example to our students of how the industry can help prepare the next generation of equipment operators and mechanics,” Solberg said. The Case skid steer is the latest addition to the 30-piece equipment fleet used in the

NWICC heavy equipment program. Solberg, who has directed the program for 12 years, said students learn to operate and maintain construction, agricultural and onhighway equipment, and each graduate of the 18-month program also passes the commercial driver’s license test. “We have a strong record of placing our graduates with big contractors, dealerships and companies with large truck fleets,” Solberg said. “It’s one of the most comprehensive programs available, and we draw students from all over the country, not just Iowa.” Solberg, himself a graduate of the NICC heavy equipment program, also credited Dean Shaw of Titan Machinery, Sioux City, Iowa, for nurturing the relationship between NICC and Case. Titan is a Case dealer with locations in seven midwest and plains states. “We’re happy to do whatever we can to help the NICC program,” Shaw said. “Roger and his staff are helping keep the industry on track for the future.” Wadzinski also commented on the importance of supporting technical training programs such as NICC’s. “It’s important to help develop young mechanics and operators. The graduates of these programs may someday work for Case or our customers,” he said. For more information, call 866/54CASE6 or visit www.casece.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 17

Page 18 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Moving in the Right Direction...

Gilbane Construction Industry Economic Report Foresees Ongoing Challenges Gilbane Building Company has published the Winter 2011 edition of Construction Economics — Market Conditions in Construction. Based on an array of economic data, construction starts and material cost trends, this free report projects that the recovery of the construction market will lag behind the overall economic recovery and will take much longer due to the severity of current conditions. Nevertheless, some critical indicators are illustrating a positive trend. “New construction starts have been strong four of the last five months, construction spending has improved throughout the year and industrial production related to construction materials is up five months in a row,” said Ed Zarenski, the report’s author and a 40-year veteran of the construction industry. “However, we haven’t seen appreciable job growth in six years. In 2011, construction increased by only 50,000 jobs when we need to see job growth of 30,000 per month to get back to previous levels, which will require significant increases in construction spending and overall project volume.” Commenting on the necessity for a realistic assessment of the state of the industry, William Gilbane Jr., president and chief operating officer of Gilbane Building Company said,

“Making good decisions in the construction industry requires the best possible information, especially when facing such a wide range of economic challenges. Construction Economics offers a detailed look at the key market drivers that are influencing our industry. Whether you are a facility owner, a general contractor, a construction management firm or an industry observer, understanding these factors is critical to everyone’s success in an increasingly challenging but exciting industry. We drew on not only the most current market data available but also on our understanding of and experience within the construction industry gained during our almost 140-year history.” Among the topics covered in this comprehensive report are: • Construction Starts, Spending, and Costs • Material Price Movement • Trends and Costs for Structural Steel, Recycling Steel and Copper • Architectural Billings Index • Current Inflation Forecast • ENR Index — BCI History For more information, visit www.gilbaneco.com/construction-economics.

$570M Crosstown Expressway Project Will Handle 173,000 Vehicles Per Day OPENING from page 1

climate for trade, business growth and job creation.” Eastbound traffic was diverted onto the new stretch of highway shortly after noon Jan. 5. Westbound traffic continued on the old I-40 bridge about five blocks to the north. At 2 mi. (3.2 km) long, the old I40 crosstown is the longest bridge in the state. Built in 1966 to accommodate about 76,000 vehicles each day, it currently carries as many as 125,000 vehicles each day and has been crumbling for years. A crack was discovered in one of its pier beams in 1989, prompting closure of the major thoroughfare for emergency construction. “Our biggest headache has been the bridge deck,” said David Streb, the Oklahoma Department of Transportation’s director of engineering. “More than half the bridge is patch. The deck is just in shambles.” The new crosstown is designed to carry 173,000 vehicles each day,

ODOT officials said. Construction began on the project in 2005. Steel beams between 50 and 80 ft. (15 to 24 m) long that were used in the old I-40 bridge will be inspected after they are removed and made available

boulevard in its place. “We’re very fortunate to be able to design a brand-new street to go right through the heart of downtown, and we intend to make the most of it,” said Oklahoma City Mayor Mick Cornett. “We intend to make it the grandest street this generation has ever seen.” “I think this is going A new convention center and city park — both part of a 10-year conto be the most iconic struction project approved by Oklahoma City voters in 2009 — structure along will be built along the boulevard. Interstate 40, coast Cornett also touted the Skydance Pedestrian Bridge over the new to coast.” Mick Cornett crosstown, an iconic structure with two massive steel “wings” on one Oklahoma City Mayor side designed in the shape of the state bird — the scissortail flycatchfor counties to use in bridge construc- er. tion, Streb said. “I’ve traveled I-40 as much as anyApproximately $570 million has one, and I think this is going to be the been spent so far on the new crosstown, most iconic structure along Interstate which opened more than six months 40, coast to coast,” Cornett said. ahead of schedule. More than $100 “People are going to remember they million will be spent tearing down the were in Oklahoma City when they see old I-40 bridge and constructing a new that beautiful art.”

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK 405-917-9191 Tulsa, OK 918-835-7200 www.oklahomaterritoryequipment.com

BEJAC CORPORATION Placentia, CA Sacramento, CA Redding, CA San Diego, CA www.bejac.com

800-77-BEJAC 888-655-3077 530-378-0881 800-54-BEJAC

APCO EQUIPMENT North Las Vegas, NV 702-871-7474 www.apcoequipment.com

TRI-WEST TRACTOR, INC. Livermore, CA 925-455-8200 www.tri-westtractor.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 19

ASCO SUPPLY CO., INC. Austin, TX San Angelo, TX San Antonio, TX Wichita Falls, TX www.ascoeq.com

512/272-8922 325/655-5666 210/333-8000 940/687-2726

DEALER IMPRINT IMPRINT AREA AREA HI-WAY EQUIPMENT Alvin, TX 281/331-1521 Beaumont, TX 409/212-8100 Brenham, TX 979/836-6641 Bryan, TX 979/779-8942 Houston, TX 713/649-0940 Houston North 281/987-1990 www.hiwayequip.com

ABILENE NEW HOLLAND, LTD. Abilene, TX www.anhltd.com

325/675-0602

AMARILLO MACHINERY CO. Amirillo, TX 806-372-7800 www.amarillomachinery.com

HISTORY NUECES POWER EQUIPMENT Corpus Christi, TX

361-289-0066 800-848-0790 Edinburg, TX 956-702-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton (El Paso) TX 915-541-0066 www.nuecespower.com

BANE MACHINERY INC. Dallas, TX 214-352-2468 Ft. Worth, TX 817-847-5894 Tyler, TX 800-594-2200 www.banemachinery.com

KCMA’s parent company, Kawasaki Heavy Industries, has over 100 years of experience providing technology solutions. Kawasaki Heavy Industries is a global supplier of innovative engineering with a portfolio ranging from jet turbines to bridge design to construction equipment.

TECHNOLOGY Kawasaki is the most experienced manufacturer of articulated wheel loaders in the world. Since introducing our first models in 1962, we have maintained a leadership position in technology, service, and support. Backed by the massive resources of Kawasaki Heavy Industries, KCMA Corporation’s focus on wheel loaders translates into real benefits for you and

your business. Kawasaki articulated wheel loaders incorporate innovative design features coupled with extensive knowledge and experience gained from real-world applications. Kawasaki pioneered Z-Link design to provide unmatched utility, high breakout force and efficiency in its machines.

INNOVATION, Technology in Motion Kawasaki engineers work with end users all over the country to access and review their wheel loader needs. With in-house special application engineers, Kawasaki is capable of responding to new industry demands quickly with comprehensive solutions. Kawasaki operates its own rebuild center. This fully equipped facility is

staffed by skilled technicians with the in-depth knowledge and specialized equipment. Kawasaki provides a totally focused approach to support your business. From carefully designed programs and services to engineered special applications options, your Kawasaki wheel loader is ready to tackle the most demanding applications and environments.

2140 Barrett Park Drive, Suite 101 Kennesaw, Georgia 30144 770-499-7000 www.kawasakiloaders.com

Page 20 â€¢ January 14, 2012 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ January 14, 2012 â€¢ Page 21

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make WKLV WKH PRVW IXHO HIÂ¿FLHQW DQG HQYLURQPHQWDOO\ friendly Link-Belt series ever: Â‡ (QKDQFHG K\GUDXOLFV LQFUHDVH VSHHG DQG HIÂ¿FLHQF\ Â‡ 7KUHH LGOH PRGHV KHOS WR HOLPLQDWH IXHO ZDVWH Â‡ (3$ FHUWLÂ¿HG 7LHU $ FRPSOLDQW ,VX]X HQJLQHV Â‡ (DV\ PDLQWHQDQFH ZLWK JURXQG OHYHO DFFHVV WR DOO Â¿OWHUV Â‡ 6HWXS DQG WUDFN VHUYLFH LQWHUYDO WLPHV RQ GLIIHUHQW LWHPV ZLWK RXU QHZ +' Â´ /(' PRQLWRU Â‡ 6HW DX[LOLDU\ K\GUDXOLF Ã€RZV DQG SUHVVXUHV IURP LQVLGH WKH FDE PRQLWRU IXHO XVDJH DQG REVHUYH WKH QHZ UHDU YLHZ FDPHUD RQ WKH FRORU /(' PRQLWRU Â‡ 2QH SLHFH UHLQIRUFHG WXUQWDEOH EHDULQJ WXE ZHOGHG RQ WKH WRS DQG ERWWRP IRU LQFUHDVHG VWUHQJWK Â‡ 1HZ ODUJHU UHLQIRUFHG 5236 FHUWLÂ¿HG FDE In addition to these improvements, all X3 excavators come with the best standard warranty in the industry.

Visit your Link-Belt excavator dealer today and experience the X Factor for yourself. ; 0DFKLQH 6SHFLÂ¿FDWLRQV 250 X3

250 X3 LF

300 X3

350 X3

Weight: ............................ 55,336 lbs......... 61,950 lbs ......... 65,918 lbs ........ 80,028 lbs Arm:.................................. 9 ft 10 in ............ 26 ft 3 in............ 10 ft 5 in ............ 10 ft 8 in Bucket Weight: ................ 1,790 lbs............. 750 lbs ............. 1,940 lbs .......... 2,580 lbs Horsepower:......................... 177 hp ................. 177 hp ................. 207 hp ................ 266 hp Max. Dig Depth: ............... 22 ft 8 in ............ 47 ft 9 in............ 23 ft 4 in ............ 24 ft 1 in ISO Breakout Force: ....... 29,000 lbf ........... 9,060 lbf........... 34,400 lbf .......... 40,020 lbf Bucket Digging Force: ...... 39,120 lbf .......... 18,570 lbf.......... 42,760 lbf .......... 55,750 lbf Swing Torque: ............... 55,243 lbf-ft ...... 51,482 lbf-ft ....... 68,151 lbf-ft ...... 82,607 lbf-ft Bucket Range: .............. .76 -2.43 yd3 ...... .50 - .86 yd3 ...... .76 - 2.43 yd3 ... 1.08 - 2.93 yd3

Page 22 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” Rasmussen Equipment Co. www.rasmussen equipment.com West Valley City, UT 801/972-5588

Waukesha-Pearce Industries, Inc. Corporate Office: 12320 So. Main • Houston, TX 77035 713/723-1050 • Fax: 713/551-0798 www.wpi.com Tomball, TX 281/351-9016

Edinburg, TX 956/386-0107

Kilgore, TX 903/984-2011

San Antonio, TX 210/648-4444

Port Arthur, TX 409/721-5305 Corpus Christi, TX 361/884-8275

Pflugerville, TX 512/251-0013

Bane Machinery Inc. www.bane machinery.com 2449 Manana Rd. Dallas, TX 75220 214/352-2468 10505 North Fwy. Fort Worth, TX 76177 817/847-5894

Bejac Corporation www.bejac.com 569 S. Van Buren St. Placentia, CA 92870 714/528-6224

1445 Simpson Way Escondido, CA 92029 877/54-BEJAC

6934 Florin-Perkins Rd. Sacramento, CA 95828 888/655-3077

5461 S. Nikita Ave. Fresno, CA 92725 800-77-BEJAC Fax: 559-834-4050

5501 East St. Anderson, CA 96007 530/378-0881

Modern Machinery Spokane, Washington 4428 E Trent Ave. Spokane, WA 99212 800-541-0754 509-535-1654 Fax: 509-534-6741

Rochester, Washington 19444 Ivan Street SW Rochester, WA 98579 800-304-4421 360-273-4284 Fax: 360-273-4290

Eugene, Oregon 4610 Cloudburst Way Eugene, OR 97402 800-826-9811 541-688-7321 Fax: 541-688-2241

Pocatello, Idaho 2666 Garrett Way Pocatello, ID 83201 800-829-4450 208-233-5345 Fax: 208-235-9658

Kalispell, Montana 3155 Highway 93 S Kalispell, MT 59901 800-434-4190 406-755-5540 Fax: 406-756-0006

Kent, Washington 22431 83rd Ave S Kent, WA 98032 800-669-2425 253-872-3500 Fax: 253-872-3519

Portland, Oregon 5241 N.E. 82nd Ave Portland, OR 97220 800-950-7779 971-222-1710 Fax: 503-255-1553

Boise, Idaho 1257 West Amity Boise, ID 83705 800-221-5211 208-336-8570 Fax: 208-336-8616

Missoula, Montana 101 International Dr. Missoula, MT 59808 800-332-1617 406-523-1100 Fax: 406-523-1117

Billings, Montana 7850 S. Frontage Rd Billings, MT 59101 800-735-2589 406-252-2158 Fax: 406-252-1165

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 23

THIS BABY

NorAm

IS READY FOR ACTION

65E

NorAm 65E | 110 HP | 16,800 LBS | 10' or 12' BLADE A workhorse spirit in a built-to-last machine...this grader performs. The NorAm 65E offers standard features such as a 53" Circle with “A” Frame Drawbar, Full Power Shift Transmission with Torque Converter, and Torque Proportioning Rear Differential, making it the highest resale value in its class. The NorAm 65E...Compact Grader with BIG Grader features.

We put the “Know” in Knowledge when it comes to Compact Motor Graders ARIZONA

COLORADO

EARHART EQUIPMENT www.earhartequipment.com Tucson 520-889-6396

WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora 303-739-3000 Denver 303-433-2727 (Rental) Carbondale 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs 719-390-7316 (Rental) 719-635-1669 Granby 970-328-2080 (Rental) Gypsum 970-328-2080 (Rental)

CALIFORNIA BEJAC CORPORATION www.bejac.com Escondido 877-543-3522 Placentia 714-528-6224

www.noram65.com

Hayden 970-276-3781 Silverhtorne 970-262-3788 (Rental) Fort Collins 970-493-5005 (Rental) Grand Junction 970-245-6546 (Rental) 970-242-2834 Pueblo 719-544-0088 (Rental) 719-544-4433 Steamboat Springs 970-871-1990 (Rental) Windsor 970-278-1750 (Rental) Burlington 719-346-7880 (Rental) (719) 346-5132 Durango 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750

NEVADA

OKLAHOMA

APCO EQUIPMENT www.apcoequipment.com North Las Vegas 702-871-7474

OCT EQUIPMENT www.octequipment.com Clinton 580-323-3422 Oklahoma City 405-789-6812 Tulsa 918-437-5085

NEW MEXICO WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista 505-334-5522 (Rental) La Cruces 575-647-9700 Albuquerque 505-938-2000 (Rental) 505-345-8411 Hobbs 575-393-2148 (Rental) 575-393-3665 Clovis 505-235-3294 (Rental) Farmington 505-327-5331

TEXAS ANDERSON MACHINERY CO. www.andersonmachinerytexas.com Corpus Christi 361-289-6043 Manor 512-272-8133 Pharr 956-781-5995 San Antonio 210-661-2366 Victoria 361-575-8111

WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651 HOLT CAT www.holtcat.com Dallas 214-342-6700 Ft. Worth 817-847-8880 Irving 214-342-6700 Waco 254-662-7377 GEORGE P. BANE, INC. www.banemachinery.com Tyler 903-597-6641

MUSTANG CAT www.mustangcat.com Houston 713-460-2000 Beaumont 409-892-8412 Bryan 979-775-7368 Bryan 979-775-0639 Channelview 281-452-7368 Conroe 936-756-1110 El Campo 979-543-3389 Freeport 979-233-7368 Houston 713-462-9993 Houston 713-228-7368 LaMarque 409-935-7000

Built from a lineage of market leaders for over 60 years

Lufkin 936-639-5551 Lufkin 936-632-6775 Nederland 409-722-7368 YELLOWHOUSE MACHINERY CO. www.yellowhouse.us Abilene 800-592-4468 Amarillo 800-658-9868 Lubbock 800-658-9878 Odessa 800-658-9888 San Angelo 800-658-9130 Wichita Falls 877-658-9877

Made in the USA

Page 24 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Air Compressor Solutions, Inc. Odessa, TX (432) 335-5900

Ditch Witch of Arizona Phoenix, AZ (602) 437-0351 (602) 437-1544 (Fax)

Ditch Witch of Southern Arizona Tucson, AZ (520) 579-0261 (520) 579-0268 (Fax)

Pape Material Handling Inc. /

Volvo Construction Equipment & Services Bakersfield, CA (661) 387-6090 Fresno, CA (559) 834-4420

San Diego/ Lakeside, CA (619) 441-3690

San Leandro, CA (510) 357-9131

Corona, CA (951) 277-7620

Sacramento, CA (916) 388-2244

Arlington, TX (817) 633-1010 Houston, TX (713) 681-9221

7000 SW Sandburg Rd. Portland, OR (503) 639-8910

Bobcat West

www.papemh.com www.bobcatwest.com 9892 40th Avenue South 1224 North California Avenue Seattle, WA Pasco, WA (206) 722-5800 (509) 545-1959

7909 N. Upland Dr. Portland, OR (503) 286-6400

19705 60th Avenue NE, Suite B1 Arlington, WA (360) 474-8461

4890 Contractors Drive Wenatchee, WA (509) 884-2934

29550 Airport Road Eugene, OR (541) 689-7407

1307 54th Avenue East Fife, WA (253) 926-4386

5518 East Broadway Spokane, WA (509) 536-7300

500 Pech Road Medford, OR (541) 779-3444

3896 Irongate Road Bellingham, WA (360) 756-6572

25 Vista Boulevard Sparks, NV (775) 356-9333

909 South 18th Street Yakima, WA (509) 248-5636

Pages 25-28

Crushing, Screening & Recycling Section Raptor Portable Cone Plants Meet Crushing Needs Raptor XL300 and XL400 cone crushers by FLSmidth Pekin LLC are designed not only to meet producers’ stationary crushing needs, but also are fully engineered to enter the portable plant markets, according to the manufacturer. Working with preferred chassis and screen manufacturers, FLSmidth’s engineers can custom-design a portable wheel-mounted plant, based on customers’ unique applications. FLSmidth builds rear-discharge XL300 and XL400 wheeled plant models as stock available for immediate purchase. Wheel-mounted plant options include rear discharge and rear feed-side discharge for both the XL300 and XL400. When combined with a horizontal 6 by 20-ft. (1.8 by 6 m) two- or three-deck screen, the XL300 can be configured into a closed-circuit crushing and screening plant. The XL300 and XL400 cone crushers can both be configured with two- or three-deck horizontal screens that are 6, 7 or 8 ft. by 20 ft. (1.8, 2 or 2.4 m by 6 m), to provide open-circuit crushing and screening plants. Hydraulic run-on jacks also are available as an option to quickly level the plant into operating position after pulling onsite. This option eliminates the time consumption and safety issues created by

The XL300 and XL400 cone crushers can both be configured with two- or three-deck horizontal screens that are 6, 7 or 8 ft. by 20 ft. (1.8, 2 or 2.4 m by 6 m), to provide open-circuit crushing and screening plants.

leveling plants with cribbing timbers, according to the manufacturer. The XL300 and XL400 cone crushers feature a high pivot point and large crushing stroke that offers crushing action throughout the crushing chamber. An active feed opening creates better end product shape for high production of salable material. The crusher line also employs “fail safe” hydraulics through an internal relief valve within the dual-acting tramp release cylinders, which ensures the machines stay protected from mechanical overload should an accumulator bladder fail. Advanced overload sensing technology detects crushing force overload. A simple alarm is activated, or the system can be automated to take corrective action. This same advanced automation system can be used to optimize crusher performance, feed control, setting adjustment and monitoring of all critical lubrication and hydraulic parameters. An additional safety feature standard on all Raptor models is the counterclockwise rotation crushing action that protects the machine if adjustment ring movement is excessive or if the ring gear brake fails. For more information, call 801/871-7000 or visit www.FLSmidth.com/Raptor.

Core Systems Delivers Custom Drive, Tail Pulley Assemblies Superior Industries’s core systems design program offers drive and tail pulley assemblies custom-engineered for a specific application. Core systems creates cost-efficiencies for customers by ensuring that drive components are ideally suited for the particular job specifications, while also making sure that power requirements are met, according to the manufacturer. Each custom-engineered drive assembly is delivered as a pre-assembled package, which eliminates the costly labor involved in onsite assembly and greatly reduces installation time. Plus, the shaft on each assembly is protected by a specially-developed rust prevention treatment. Comprised of key sales, engineering and manufacturing personnel that serve the Superior Industries line of power transmission components, the core systems team employs the latest finite element design practices to translate specs and recommendations into life-like visualizations. Upon

examining each specific application, this technology predicts potential failures and allows the engineer to adjust the design accordingly. Each core systems team member is certified by the American Welding Society and is fully trained in weld inspection and x-ray capabilities. The Superior Industries core systems design program provides quick turnaround times by having most power transmission components stocked or readily available. Assembly drawings and all industry leading brands of power transmission components are available upon request. For more information, call 320/589-7085 or visit www.superiorind.com.

Superior Industries’s core systems design program offers drive and tail pulley assemblies custom-engineered for a specific application.

Page 26 • January 14, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Grasan Mobile Screen Plants Available in Sundry Sizes

Mobile units are designed for high mobility with fast setup, according to the manufacturer.

Grasan mobile screen plants are available up to 8 by 24 ft. (2.4 by 7.3 m) size with inclined screens and up to 7 by 20 ft. (2 by 6 m) size with horizontal screens. Inclined units can be equipped with spray bars and slurry flume for washing applications. Grasan plants can be custom designed to work with varying quarry layouts or existing equipment and optional blending gates and various cross belt configurations are available. Both horizontal and inclined units can be supplied with fold-down feed boxes to minimize setup time.

Mobile units are designed for high mobility with fast setup, according to the manufacturer. The horizontal screen plant is driven into place under the feed conveyor and the legs are blocked. No other setup procedure is required. Optional hydraulic outrigger legs make setup even easier and screens are mounted on single-, tandem- or triple-axle trailers. Standard equipment includes fifth wheel kingpin hitch, dual 11:00 x 22.5 tires, air brakes, signal lights and mud flaps. Units are

Grasan mobile screen plants are available up to 8 by 24 ft. (2.4 by 7.3 m) size with inclined screens and up to 7 by 20 ft. (2 by 6 m) size with horizontal screens.

designed with ample room under the discharge chutes for radial stackers or transfer conveyors. Body frames are fabricated with highstrength wide flange beams, include walkways with access ladders and have fixed or folding support legs. Feed boxes and discharge chutes have wear liners, and the entire chute assembly removes easily in one

piece for maintenance. There is an oversize electric motor for fast start-up in cold weather. The fines-gathering conveyor and reversible side discharge conveyor(s) come complete with discharge chutes and adjustable belt scraper on fines conveyor minimizes clean-up. For more information, call 419/526-4440 or visit www.grasan.com.

Terex Cedarapids Portable Plant Maximizes Production The Terex Cedarapids The high lift screen (HLS) and the cone hopper overflow system CRC380HLS portable crushing and allow a large head of material to build up, force-feeding the screening plant’s unique design cone crusher. allows the cone crusher to be constantly choke fed, maximizing production capability. The high lift screen (HLS) and the cone hopper overflow system allow a large head of material to build up, force-feeding the cone crusher, which increases throughput. The large cone hopper and overflow chute buffer feed variations and prevent material from backing up to the screen, which allows production rates to stay at peak levels with no need to throttle back. A gross throughput of up to 1,200 tons (1,088 t) per hour is possible in sand and gravel, according to the manufacturer. The HLS system also increases uptime by hydraulically moving the screen forward, providing easy access for faster manganese changes. The plant quickly and easily transforms into its operating and transport modes. The CRC380HLS plant incorporates a oval stroke design. A blending gate system reversible product conveyors discharge 44 high efficiency 300 hp (223 kW) MVP380 allows combining center and bottom decks in. (117 cm) beyond the plant frame on ElJay roller bearing cone crusher and a high in 25 percent increments for numerous prod- either side. The 4-axle configuration and a 3+1-axle option provide portability in most performance 6 by 20 ft. (1.8 by 6 m) triple uct variations. Two large 30 in. (76 cm), 7.5 hp (5.6 kW) any location. Optional run-on hydraulic deck TSH6203 horizontal screen with ElJay

jacks, self-cleaning feed conveyor magnet, dust suppression system and zero speed interlocks also are available. For more information, call 319/363-3511 or visit www.terexmps.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2012 • Page 27

102x152 Track Mounted Impact Plant

6x16 2 Deck Screen-It

Rock-It Static Grizzly

Picking Station with Screen-It

Separate-It RWS 2000 Rock/Wood Separator

Page 28 • January 14, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

WHY SETTLE FOR LESS? Midco Offers the Finest in New Hydraulic Hammer and the Highest Quality in Rebuilds! MIDCO Demolition Tool Company Performs a Complete Teardown & Complete Rebuild We are Including: your newly 1 - Remove the head. 2 - Pull the cylinder. 3 - Hot pressure wash the entire unit. 4 - Polish piston & check tolerances. - Rebuild & charge accumulator. - Install all new seals. - Repaint to spec. - Install new chisel & bushing. - All hammers include new hoses, seals, chisel or moil points, paint, OEM decals and final hammer testing.

authorized Chicago Pneumatic dealer. 5 6 7 8 9

U-SCREEN C-36 NEW!

MIDCO Rebuilds Hammers from 200 lbs. to 10,000 lbs. MIDCO Demolition Tool Company... Your “One-stop Shop” for New, Used and Rebuilt Hydraulic Hammers Plus Over 1,300 Hammer Tools and Parts for Sale!

Dealer Inquiries Invited Designed For Skid Steers, Loaders & Excavators •Screen 500 to 600 yards per day •Any Size Screen Available •Stacking Height: 9’ •Width: 5’ 6” •Length: 28” •6’ x5’ Screening Deck

OEM REPAIR FACILITY - DALLAS, TEXAS Call David Spainhour in Dallas,TX

214-688-0444 Fax 214-630-5419

•Easy Change Screens •25 HP Kubota Diesel Power •Hydraulically operated Screen •Hydraulic trailer axle •30” Hydraulic Conveyor Belt •Towed with 1 Ton Vehicle

Email dspainhour@midcosling.com

Authorized Dealer:

www.u-screen.com ΣΑςΕ Α ΛΙΦΕ. ∆ΟΝ∏Τ ∆ΡΙςΕ ΗΟΜΕ ΒΥΖΖΕ∆. ΒΥΖΖΕ∆ ∆ΡΙςΙΝΓ ΙΣ ∆ΡΥΝΚ ∆ΡΙςΙΝΓ.

SALES • SERVICE • PARTS

905 Turnpike Street • Canton, MA 02021

1-866-USCREEN (781) 828-9100 • Fax: (781) 821-8807

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 29

Trucks & Trailers

SECTION

Pages 30-31

Komatsu America Launches HM400-3 Articulated Truck Komatsu leveraged its leadership in technology and innovation — building on its Tier III engine platform — to design a more environmentally friendly engine that increases power while decreasing fuel consumption, according to the manufacturer. Komatsu America Corp.’s HM400-3 articulated truck is powered by a Komatsu SAA6D140E-6 engine with a net horsepower of 469 hp (350 kW) and is EPA Tier IV Interim and EU Stage 3B emissions certified. Komatsu leveraged its leadership in technology and innovation — building on its Tier III engine platform — to design a more environmentally friendly engine that increases power while decreasing fuel consumption, according to the manufacturer. With the introduction of the Komatsu CARE Program, every Komatsu Tier IV Interim construction machine comes standard with complimentary factory scheduled maintenance for 2,000 hours or the first three years (whichever occurs first), and includes two complimentary Komatsu diesel particulate filter (KDPF) exchanges within the first five years. The Komatsu CARE program covers all new Komatsu Tier IV Interim equipment, whether rented, leased or pur-

The HM400-3 features a maximum gross vehicle weight (GVW) of 162,569 lbs. (73,740 kg), hauling up to a 44.1 ton (40 t) payload at its maximum ground speed of 34.7 mph (55.9 kph).

chased. The HM400-3 features a maximum gross vehicle weight (GVW) of 162,569 lbs. (73,740 kg), hauling up to a 44.1 ton (40 t) payload at its maximum ground speed of 34.7 mph (55.9 kph). Improved operating performance, lower fuel consumption, improved operator comfort and enhanced serviceability are features of the HM400-3 that provide increased productivity and lower operating costs. The HM400-3 is equipped with the latest KOMTRAX technology, which sends machine operating information to a secure Web site utilizing wireless technology. Data such as daily fuel consumption, machine utilization, operating hours, location, cautions and maintenance alerts are relayed to the web application for analysis. The KOMTRAX fleet monitoring system increases machine availability, reduces the risk of machine theft, allows for remote diagnosis by the distributor, and provides a wealth of

other information to drive business efficiency and productivity. EPA Tier IV Interim and EU Stage 3B Emissions Certified Engine Built upon Tier III technology, the SAA6D140E-6 engine provides increased horsepower while lowering fuel consumption. The Komatsu Tier IV Interim engine uses an advanced electronic control system to manage airflow rate, fuel injection, combustion parameters and after-treatment functions to enhance performance, reduce emissions and provide advanced diagnostic capability. Komatsu also has developed a hydraulically actuated variable geometry turbocharger (KVGT) and exhaust gas recirculation (EGR) valve, resulting in better precision and air management as well as longer component life. The KDPF filter and regeneration system are integrated so as to not interfere with daily operation but keep the opera-

tor aware of its status. Improved Operation The HM400-3 features the new Komatsu traction control system (K-TCS). The KTCS system automatically provides optimum traction when operating in soft ground conditions. As ground conditions worsen, speed sensors located on four wheels detect tire slippage and automatic application of the inter-axle differential lock occurs. If tire slippage continues to be detected, four independent brakes can be applied to slipping wheels to regain traction. The HM400-3 is enhanced with Komatsu advanced transmission with optimum modulation control system (K-ATOMiCS). KATOMiCS offers a six-speed, fully automatic transmission that uses an advanced electronic system to eliminate shift shock and torque cutoff to aid operator in operating the see KOMATSU page 31

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • January 14, 2012 • Page 31

Features Include New Cab Design KOMATSU from page 30

engine in the most efficient range. The electronic system automatically selects the gear based on vehicle speed, engine speed and the shift position selected, resulting in powerful acceleration, smooth down shifting and synchronized engine speed when climbing slopes. K-ATOMiCS works to minimize operator fatigue and load spillage from the body, thus increasing productivity. A large automatic retarder allows the operator to select the optimum operating speed on downhill travel and fully loaded hauls, thus eliminating effects by inertial acceleration. Increased Payloads Through body design optimization the HM400-3 features increased body capacity and payload. The low 10 ft. 5 in. (3.2 m) loading height easily matches with 40 to 60 ton (36 to 54 t) hydraulic excavators or 5.5 to 7.5 cu. yd. (4.2 to 5.7 cu m) wheel loaders. In addition, the two single-staged body lift cylinders provide a 70-degree dump angle.

Enhanced Operator Environment The new cab design provides a more comfortable and quieter work environment. The ROPS/FOPS Level 2 certified cab features a newly designed rounded front dash panel with easy-toreach switches. The dashboard has been redesigned and the high back, heated air ride seat with three-point seat belt has been relocated to improve visibility. An auxiliary input also has been added to connect an MP3 player or other device along with two 12-volt ports that have been incorporated into the cab. A new high resolution 7 in. LCD monitor features enhanced capabilities and displays information in 25 languages for global support. Using the monitor, the operator can easily modify settings for items such as the auto idle shutdown or the auto-reversing fan; check operational records, such as driving history or fuel consumption; monitor the KDPF or check for when the next maintenance interval is required. The monitor also offers the operator the option of using the ECO guidance function, which provides operational

tips to reduce fuel consumption. A rear view monitor system with a separate 7 in. LCD monitor is standard with every machine and is mounted on the right hand side of the console for operator convenience. Maintenance and Serviceability To reduce costly downtime, the HM400-3 provides easy service access. The new model features a newly designed engine hood for easy access and two standard hydraulically driven auto-reversing fans to help keep the radiator and charge air cooler clean. The truck is equipped with the Komatsu equipment management monitoring system (EMMS) that has enhanced diagnostic features that give the operator and technicians greater monitoring and troubleshooting capabilities. EMMS continually monitors all critical systems, preventive maintenance schedule, and provides troubleshooting assistance to minimize diagnosis and repair time. For more information, visit www.komatsuamerica.com.

Page 32 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days ad runs for 2 (two) insertions - no changes in second insertion.

CLASSIFIEDS

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

2009 Universal R MAG 92, readt to go to work - demo unit!,...........................$29,000.

CRANES Crane Inspections Specializing in Truck Mounted Cranes Modern Equipment Sales & Rental 800/445-4381

GENERATORS

Gehl Skid Steer Loaders, Excavators, Track Loaders, Attachments!

Generators & Gen Sets

Rent or Purchase Norris Sales Company 610/279-5777

EXCAVATORS

NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Modern Equipment Sales & Rental 800/445-4381

Track Loaders

Breakers 2004 NPKE-208, 2500 ft./lb. impact energy, fits 14-21 US ton carriers, good condition ......................................$8,700.

Construction & Industrial Equipment Rentals

Stone, Wacker, MBW, Diamond Products, Honda, IR, AGL, Sky Trak, JLG, JoBox, DeWalt, Stihl, Imer

Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

Rentals, Sales, Service

Each

Amanda Geiger bought these sunglasses to wear on spring break. She wore them only once

Amanda Geiger bought these sunglasses

before she was killed by a drunk driver.

to wear on spring break. She wore them only once Friends Don’tdriver. Let Friends Drive Drunk. before she was killed by a drunk

Block Friends Don’t Let Friends Drive Drunk.

Classified Rates: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction equipment Guide. card member’S name _________________________________________________companY name ___________________________________________________ Street______________________________________________________________________phone no. _________________________________________________

maStercard

american expreSS exp. date

card number

Signature of authorized cardholder

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 maryland drive • fort Washington, pa 19034 email: sales@cegltd.com

Photo by Michael Mazzeo

ViSa

Photo by Michael Mazzeo

check enclosed

Photo by Michael Mazzeo

citY _______________________________________________________________________State ___________________________ zip __________________________

For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

TRUCKS

before shefrom wasthe killed by awhere drunkshe driver. received center helped teens with Norris Sales Company Operator Training drug and alcohol problems. She was wearing it 610/279-5777 Friends Don’t Let when an underage drunkFriends driver tookDrive her life.Drunk. Are your operators compliant Construction & Equpment & with Federal Standards, Supplies the Let Friends Drive Friends for Don’t Drunk. OSHA, ANSI, ISO? "Professionals"

PARTS

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders

TRAINING

to wear on spring She wore them only once This bracelet wasbreak. a gift Amber Apodoca

Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

Norris Sales Company 610/279-5777

Mon-Fri 6:30 am - 5:00 pm Amanda Geiger bought these sunglasses Sat 7:00 am - 12:30 pm

Classified...2 Insertions...95¢ Per Word One Word HEADING (Category to place listing):

Norris Sales Company 610/279-5777

Rental

McAllister Equipment Jim Tracey 708/297-3541

Stone, Wacker, Honda, Gehl, JLG to name a few .....

RENTALS

1990 Cat 953 LGP, OROPS, good running machine, fair condition..........................$22,500.

FORESTRY EQUIPMENT Stump Grinders

Modern Equipment Sales & Rental 800/445-4381

Crawler Loaders

HYDRAULIC HAMMERS

Daily - Weekly - Monthly & Long Term Rentals Available

TEREX PARTS

Misc. Landscape Equip. Heavy Equipment Sales Co. 763-428-2260

For Sale or Rent All Makes and Models

Hydraulic Excavators

Crane Parts

LANDSCAPE EQUIP.

Bucket Trucks ELLIOTT BUCKET TRUCKS Modern Equipment Sales & Rental 800/445-4381

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 33

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. CATERPILLAR, HITACHI, DYANPAC , KOMATSU • REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR STOCK TIME TO TIME) CAT 920.930.950B, E & 966D,E CAT 140G S/N:10,000 UP. DYNAPAC CA251D,CA262D,CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1,EX100WD-1, EX60WD-1,UH07-7,UH083 KOMATSU EXCAVATOR PC 200-6,-7. IF AVAILABLE ANY TIME CONTACT ME. CONTACT: MR KHAN PHONE: +92-300-283-10-78 EMAIL: IUK.IUKCO@LIVE.COM –––––––––––––––––––––––––––––––– NEEDED TO BUY BULLDOZER D9T WITH RIPPER UNDER 7000 HOURS CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– TIRES 295 X 25 • TIRES...TIRES....TIRES 29.5 X 25 CONTACT: MIKE PIEPER PHONE: 319-372-2276 FAX: 319-372-2277 EMAIL: PI2279@YAHOO.COM –––––––––––––––––––––––––––––––– VIBRATORY PILE HAMMERS (ICE, MKT OR APE • I AM SEEKING TO PURCHASE USED VIBRATORY PILE HAMMERS MANUFACTURED BY ICE, MKT OR APE. INTERESTED ONLY IN VIBRATORY MODELS AT WHOLESALE PRICING. SAME DAY PURCHASE AND PAYMENT AVAILABLE. CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– 378 CUMMINS • LOOKING FOR AN ENGINE FOR A HOUGH 60 B PAYLOADER CONTACT: AL PHONE: 402-358-0410 EMAIL: ALAMOFARM@GMAIL.COM –––––––––––––––––––––––––––––––– FLATBED TRAILERS • LOOKING FOR USED 48X102" SPRING RIDE FLATBED TRAILERS. CONTACT: JOE TERRY PHONE: 832-215-6586 FAX: 713-696-8519 EMAIL: JTERRY@ADOBEEQUIPMENT .COM –––––––––––––––––––––––––––––––– AUTOCAR TRUCK AP15 OFFHIGHWAY DUMPEND TRUCK • ANY CONDITION. CONTACT: ARTHUR MELLINGER PHONE: 717-575-3668 EMAIL: ARTMELLINGER@GMAIL.COM –––––––––––––––––––––––––––––––– SEEKING TO SCRAP OLD SAW MILLS, MINING & GRAVEL PLANTS, OR OLD EQUIPMENT | CALIFORNIA ONLY CONTACT: MIKE MURPHY PHONE: 805-929 4604 FAX: 805-929-6485 EMAIL: JSMURPHY2011@HOTMAIL.COM ––––––––––––––––––––––––––––––––

LOOKING FOR EAGLE CRUSHING PLANT 1000CC OR 1200CC PORTABLE CRUSHING PLANT CONTACT: JOE PHONE: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– KOMATSU D53A17 RIPPER • I NEED A USED RIPPER FOR A D53A-17 KOMATSU DOZER CONTACT: JOHN RATLIFF PHONE: 276-608-1507 FAX: 276-591-1239 EMAIL: CMESALES@BVUNET.NET –––––––––––––––––––––––––––––––– KENCO KL9000 BARRIER LIFT CONTACT: MICHAEL GIGLIO PHONE: 708-868-0074 FAX: 708-868-0102 EMAIL: MGIGLIO @CALUMETCITYPLUMBING.COM –––––––––––––––––––––––––––––––– NEEDED BULLDOZER KOMASTU D65E 6 D85 WITH MOTOR KOMASTU ONLY USER? CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– WOULD LIKE TO FIND A CAB FOR A BOBCAT 334 EXCAVATOR, ONE THAT WOULD BE A HARD CAB NOT A VINYL ONE CONTACT: GARY DONARSKI PHONE: 218-874-3171 FAX: 218-874-3172 EMAIL: BDCONSTCO@WIKTEL.COM –––––––––––––––––––––––––––––––– CATERPILLAR WHEEL LOADERS IN USA & EUROPE • URGENT REQUIRED USED CATERPILLAR WHEEL LOADERS MENTIONED MODELS: MODELS 920,926E,930,950, 936E, 950B, 950E, 966D, 966E IF YOU HAVE ANY OF THE MACHINE FROM MY REQUIRED MODELS IN PRESENT OR IN FUTURE PLZ FEEL FREE TO CONTACT US. CONTACT: IKRAM ULLAH KHAN AND COMPANY PHONE: +92-333-55-55-360 EMAIL: IUK.IUKCO@GMAIL.COM –––––––––––––––––––––––––––––––– GEHL 4835 SXT • LOOKING FOR WINDOWS AND DOOR FOR CAB. ALSO HEATER ASSEMBLY. CONTACT: MIKE PHONE: 715-577-7145 EMAIL: MJSCHMM@AOL.COM –––––––––––––––––––––––––––––––– ***WANTED*** CATERPILLAR CHALLENGER BELTS TO BE USED ON 75, 85, AND 95 (SIZE 24 - 36 INCH WIDTH) CONTACT: MIKE PIEPER PHONE: 319-372-2276 FAX: 319-372-2277 EMAIL: PI2279@YAHOO.COM –––––––––––––––––––––––––––––––– SCRAPER TIRES 3325 X 29 | WE ARE LOOKING FOR LOTS OF TIRES IN SIZE 33.25 X 29 CONTACT: MIKE PIEPER PHONE: 319-372-2276 FAX: 319-372-2277 EMAIL: PI2279@YAHOO.COM ––––––––––––––––––––––––––––––––

CX330 USED TRACK CHAINS OR GROUPS | LOOKING FOR USED TRACK CHAINS FOR A CASE CX330, JD 330CLC, AND SK135 CONTACT: MICK PHONE: 352-527-0072 EMAIL: MICK.FIELDS@FIELDCO.BIZ –––––––––––––––––––––––––––––––– BOBCAT SKID STEER LOADERS AND/OR MINI EXCAVATORS ***WANTED*** I AM PAYING CASH FOR YOUR BOBCAT BRAND MACHINERY. ESPECIALLY LOOKING FOR LARGE FRAME SKID STEER LOADERS; S250, S300, T300, T320. PREFER GOLD PACKAGE MACHINES BUT WILL CONSIDER ANY SIZE OR MODEL BOBCAT. **CONTRACTORS ONLY - PLEASE NO DEALERS** CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– HITACHI EXCAVATORS EX200 NEEDED CONTACT: HIDAYAT MASOOD PHONE: +92-345-8818803 EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WE BUY CONSTRUCTION EQUIPMENT IN USA | CATERPILLAR WHEEL LOADERS - CAT 938 G YEAR 2000-2006 - CAT 950 G YEAR 2000-2006 VOLVO WHEEL LOADER - VOLVO L90C YEAR 1996-1999 - VOLVO L90D YEAR 2000-2003 - VOLVO L90E YEAR 2000-2010 - VOLVO L120 C YEAR 1996-1999 - VOLVO L150 C YEAR 1996 TO 1999 CATERPILLAR EXCAVATOR - CAT 325BL YEAR 1996-2000 CATERPILLAR BACKHOE - CAT 420 D YEAR 2003 TO 2007 - CAT 420 D IT YEAR 2003 TO 2007 CATERPILLAR BULLDOZER - CAT D6R XL YEAR 2000 TO 2006 - CAT D6R LGP YEAR 2000 TO 2006 - CAT D6R YEAR 2000 TO 2006 EMAIL: 2CMJ.BUYERS@GMAIL.COM –––––––––––––––––––––––––––––––– OLDER MODEL CAT WHEEL LOADER | USED OLDER MODEL CAT 966 AND 980. ONLY LOOKING FOR MACHINES PRICE AT $20,000 OR UNDER. THANKS MAT CONTACT: MAT OSI PHONE: 510 472 9406 FAX: 415 455 9945 EMAIL: MOSIUHWU123@YAHOO.COM –––––––––––––––––––––––––––––––– WHEEL LOADER WITH HI TIP MULCH BUCKET | OLDER MACHINE IS OK CONTACT: JOHN KELLY PHONE: 512 233 9138 FAX: 512 233 0665 EMAIL: POPPOP0440@YAHOO.COM –––––––––––––––––––––––––––––––– CAT 120 OR 140 | LATE 90 TO EARLY 2000 CONTACT: JACK KELLY PHONE: 512 233 9138 FAX: 512 233 0665 EMAIL: ROCKEQUIPMENT8@HOTMAIL.COM ––––––––––––––––––––––––––––––––

KOMATSU WA250 OR 350 | 40 TO 50K USD RANGE DECENT CONDITION AND HOURS CONTACT: JACK KELLY PHONE: 512 233 9138 FAX: 512 233 0665 EMAIL: JACK0440@HOTMAIL.COM –––––––––––––––––––––––––––––––– USED CONSTRUCTION AND ROAD MACHINES (WE BUY FOR OUR STOCK TIME TO TIME) CAT 950B,E & 966D,F CAT 140G S/N:10,000 UP. DYNAPAC CA251D, CA262D,CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1, EX100WD-1, EX60WD-1, UH07-7, UH083 IF AVAILABLE ANY TIME CONTACT ME. CONTACT: AAAKRAM KHAN PHONE: +92-300-283-10-78 EMAIL: INFO@IUKCO.COM –––––––––––––––––––––––––––––––– BULLDOZER KOMASTU 375A 1 OR 2 3 WITH RIPPER CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– 6 SPOOL CONTROL VALVE FOR FORD BACKHOE | HI, I HAVE AN OLD FORD BACKHOE 755 SERIES, I BELIEVE, WHICH IS ON A 1968 FORD 3500 3 CYL GAS INDUSTRIAL TRACTOR, AND I AM LOOKING FOR A 6 SPOOL VALVE FOR IT; THE ORIGINAL ONE IS MISSING. SOMEONE COBBLED UP 2 SEPARATE 3 SPOOL VALVES IN SERIES ON IT WHICH DOES NOT WORK. IM SURE I COULD FIT A VALVE FROM ANOTHER MAKE OR MODEL IF IT CAME TO THAT. I LIVE AT WADDELL AZ 85355. CONTACT: BARRY HOEY PHONE: 251-504-5587 EMAIL: BARRYHOEY1@GMAIL.COM –––––––––––––––––––––––––––––––– 950B & 950G | NEED 950B, 950G, MODEL 1998, 2000. IF YOU HAVE PLEASE SEND DETAILS & PICTURES. NEED CONTRACTOR OWNED & WHOLESALE PRICES. THANKS CONTACT: MARK EMAIL: AAMARK.SALE@GMAIL.COM –––––––––––––––––––––––––––––––– HITACHI EX200 | WE NEED HITACHI EXCAVATORS EX200,OFFER US & SEND DETAILS, PICTURES & YOUR PRICE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– HEAVY EPT SERVICE MANUALS | WE BUY HEAVY EQUIPMENT SERVICE MANUALS, PARTS MANUALS AND OPERATOR MANUALS. CONTACT: AARON HAYES PHONE: 503-572-4169 FAX: 503-460-0169 EMAIL: BUYINGOEM@GMAIL.COM –––––––––––––––––––––––––––––––– CAT 950F LOADER CONTACT: OUSMAN DIALLO PHONE: 00233[O]244080567 EMAIL: DIALLOOUSMAN@YAHOO.COM ––––––––––––––––––––––––––––––––

EXTEC C10 TRACK JAW | LATE MODEL LOW HOUR WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– CRANE, ROUGH TERRAIN | I AM LOOKING FOR A GROVE ROUGH TERRAIN CRANE 1994 OR NEWER 18 TO 30 TON. WHOLESALE PRICES ONLY PLEASE. CONTACT: TIM HENDRICKS PHONE: 7703137562 EMAIL: TIMOTHY.HENDRICKS@GMAIL.COM –––––––––––––––––––––––––––––––– BUCKETS WANTED !!! WE WOULD LIKE TO PURCHASE IN THE NEXT 30 DAYS A BUCK OF ANY WIDTH FOR A 325 AND/OR A 330. PLEASE CALL IF YOU HAVE ONE. CONTACT: MIKE PIEPER PHONE: 319-372-2276 FAX: 319-372-2277 EMAIL: PI2279@YAHOO.COM –––––––––––––––––––––––––––––––– LOOKING TO PURCHASE A CATERPILLAR 939C CRAWLER LOADER WITH A HYSTAT TRANSMISSION AND A 4-IN-1 MP BUCKET. PREFER MACHINE LOCATED IN S.E. UNITED STATES (FLORIDA AREA) PRICED AT OR UNDER $17,500. CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– WE BUY CONSTRUCTION EQUIPMENT IN USA • CATERPILLAR WHEEL LOADERS - CAT 938 G YEAR 2000-2006 - CAT 950 G YEAR 2000-2006 VOLVO WHEEL LOADER - VOLVO L90C YEAR 1996-1999 - VOLVO L90D YEAR 2000-2003 - VOLVO L90E YEAR 2000-2010 - VOLVO L120 C YEAR 1996-1999 - VOLVO L150 C YEAR 1996 TO 1999 CATERPILLAR EXCAVATOR - CAT 325BL YEAR 1996-2000 CATERPILLAR BACKHOE - CAT 420 D YEAR 2003 TO 2007 - CAT 420 D IT YEAR 2003 TO 2007 CATERPILLAR BULLDOZER - CAT D6R XL YEAR 2000 TO 2006 - CAT D6R LGP YEAR 2000 TO 2006 - CAT D6R YEAR 2000 TO 2006 CONTACT: JULIO URIBE EMAIL: CMJ.IMPORT03@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE NEED HITACHI EXCAVATORS EX200, OFFER US & SEND DETAILS, PICTURES & YOUR PRICE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WE BUY HEAVY EQUIPMENT SERVICE MANUALS, PARTS MANUALS AND OPERATOR MANUALS. CONTACT: AARON HAYES PHONE: 503-572-4169 FAX: 503-460-0169 EMAIL: BUYINGOEM@GMAIL.COM –––––––––––––––––––––––––––––––– CAT 950F LOADER CONTACT: OUSMAN DIALLO PHONE: 00233[O]244080567 EMAIL: DIALLOOUSMAN@YAHOO.COM ––––––––––––––––––––––––––––––––

EXTEC C10 TRACK JAW • LATE MODEL LOW HOUR WORK READY CONTACT: RICHARD PHONE: 603-828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– CAT WHEEL LOADER OLDER MODEL • WE WANT TO BUY USED CAT WHEEL LOADER YEAR MODEL 1976-1990. OFFER US YOUR EQUIPMENT WITH PICTURES, SERIAL NUMBERS CONTACT: MR. MATTO PHONE: 510-472-9406 FAX: 415-455-9945 EMAIL: MOSIUHWU123@YAHOO.COM –––––––––––––––––––––––––––––––– CRANE, ROUGH TERRAIN | I AM LOOKING FOR A GROVE ROUGH TERRAIN CRANE 1994 OR NEWER 18 TO 30 TON. WHOLESALE PRICES ONLY PLEASE. THANKS CONTACT: TIM HENDRICKS PHONE: 770-313-7562 EMAIL: TIMOTHY.HENDRICKS@ GMAIL.COM –––––––––––––––––––––––––––––––– WE NEED THE FOLLOWING USED EQUIPMENT, CAT WHEEL LOADERS 966D, 966E & CAT MOTORGRADERS 14G. CONTACT: HIDAYAT MASOOD PHONE: +92-345-8818803 EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– 900 MM SHOE KOMATSU PART # 20Y32-31330 FOR A PCLC8 CONTACT: ROBERTO J PALACIOS PHONE: 786-287-7056 FAX: 305-573-7038 EMAIL: CARGOAWAYCORP@LIVE.COM –––––––––––––––––––––––––––––––– 2004 CAT BULLDOZER D6R FROM 50,000 USD PHONE: 2540729088788 EMAIL: LUCCINDA20@YAHOO.COM –––––––––––––––––––––––––––––––– WE BUY CONSTRUCTION MACHINERY FROM ANY LOCATIONS OF UNITED STATES (ANYWHERE IN THE UNITED STATES) | CATERPILLAR WHEELLOADERS - CAT 938 G YEAR 2000-2006 - CAT 950 G YEAR 2000-2006 VOLVO WHEEL LOADER - VOLVO L90C YEAR 1996-1999 - VOLVO L90D YEAR 2000-2003 - VOLVO L90E YEAR 2000-2010 - VOLVO L120 C YEAR 1996-1999 - VOLVO L150 C YEAR 1996 TO 1999 CATERPILLAR EXCAVATOR - CAT 325BL YEAR 1996-2000 CATERPILLAR BACKHOE - CAT 420 D YEAR 2003 TO 2007 - CAT 420 D IT YEAR 2003 TO 2007 CATERPILLAR BULLDOZER - CAT D6R XL YEAR 2000 TO 2006 - CAT D6R LGP YEAR 2000 TO 2006 - CAT D6R YEAR 2000 TO 2006 CONTACT: JULIO URIBE PHONE: 511998227207 EMAIL: CMJ.IMPORT@HOTMAIL.COM ––––––––––––––––––––––––––––––––

Page 34 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Portland, OR Thurs., January 12, 2012 For: Major Job Completion Auction of Construction Equipment • Columbus, OH Sat., January 14, 2012 For: Late Model John Deere Rental Returns • Kissimmee, FL Sat.-Sun., Jan 28 – Feb 5, 2012 For: 19th Annual Florida Sale! Rental Returns Construction Equipment, Attachments, Aerials, Support, Trucks and Trailers • Tuscaloosa, AL Sat., March 3, 2012 For: Construction, Logging, Truck Tractors, Support • Dallas, TX Wed., March 7, 2012 For: Construction Equipment, Trucks, Trailers, Attachments, Support • Manchester, NH Sat., March 10, 2012 For: Telescopic Forklifts, Boom/Scissor Lifts, Air Compressors, Skid Steers • Atlantic City, NJ Thurs., March 29 – Sun., April 1, 2012 For: Annual 4 Day Construction, Support, Attachment, Truck & Trailer Auction • Bogota, Columbia Sat./Sun., April 21-22, 2012 For: Late Model Construction & Support Equipment • Buffalo, NY Sat., April 28, 2012 For: Construction Equipment, Support, Tools, Trucks and Trailers • Middletown, NY Sat., May 12, 2012 For: Construction, Support, Trucks and Trailers • Houston, TX DATE TBA For: Construction Equipment, Support, Trucks and Trailers

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Las Vegas, NV January 27, 2012 • Houston, TX February 8-9, 2012 • Orlando, FL February 14-18, 2012 • Tipton, CA February 17, 2012 • Phoenix, AZ February 24, 2012 • Kansas City, MO March 1, 2012 • Los Angeles, CA March 2, 2012 • Springfield, IL March 13, 2012 • Albuquerque, NM March 21, 2012 • Chicago, IL March 15, 2012 • Minneapolis, MN March 21, 2012

• Sacramento, CA March 27, 2012 • Chehalis, WA March 29, 2012 • St. Louis, MO March 30, 2012 • Dickinson, ND April 4, 2012 • Grants Pass, OR April 13, 2012 CANAD A • Saskatoon, SK April 18, 2012 INTERNATIONAL • St. Aubin Sur Gaillon, France March 6, 2012 • Caorso, Italy March 8, 2012 • Panama City, Panama March 9, 2012 • Ocana, Spain March 15-16, 2012 • Brisbane, Australia March 20, 2012 • Geelong, Australia March 22, 2012

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • San Bernardino, CA January 28, 2012 For: Construction Equipment • Sacramento, CA February 11, 2012 For: Construction Equipment • San Bernardino, CA February 25, 2012 For: Construction Equipment • Sacramento, CA March 10, 2012 For: Construction Equipment • San Bernardino, CA March 24, 2012 For: Construction Equipment • Sacramento, CA April 14, 2012 For: Construction Equipment • San Bernardino, CA April 28, 2012 For: Construction Equipment • Sacramento, CA May 12, 2012 For: Construction Equipment • San Bernardino, CA May 26, 2012 For: Construction Equipment • Sacramento, CA June 9, 2012 For: Construction Equipment • San Bernardino, CA June 23, 2012 For: Construction Equipment • Sacramento, CA

Coming Auctions July 14, 2012 For: Construction Equipment • San Bernardino, CA July 28, 2012 For: Construction Equipment • Sacramento, CA August 11, 2012 For: Construction Equipment • San Bernardino, CA August 25, 2012 For: Construction Equipment • Sacramento, CA September 8, 2012 For: Construction Equipment • San Bernardino, CA September 22, 2012 For: Construction Equipment • Sacramento, CA October 13, 2012 For: Construction Equipment • San Bernardino, CA October 27, 2012 For: Construction Equipment • Sacramento, CA November 10, 2012 For: Construction Equipment • San Bernardino, CA November 16, 2012 For: Construction Equipment • Sacramento, CA December 8, 2012 For: Construction Equipment • San Bernardino, CA December 15, 2012 For: Construction Equipment

CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • Albuquerque, NM February 28, 2012 For: Construction Equipment

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087 • Prospect, CT March 10, 2012 For: Construction Equipment • Prospect, CT April 28, 2012 For: Construction Equipment • Prospect, CT June 23, 2012 For: Construction Equipment

• Prospect, CT August 18, 2012 For: Construction Equipment • Prospect, CT October 13, 2012 For: Construction Equipment • Prospect, CT December 8, 2012 For: Construction Equipment

DEANCO AUCTIONS

www.deancoauction.com 601-656-9768 • Philadelphia, MS Wed.-Fri., March 28-30, 2012 For: Huge 3-Day Contractor’s Auction

EQUIPMENT FACTS

www.equipmentfacts.com 908-788-2025 • Kissimmee, FL Mon., February 20, 2012 For: Virtual Auction of Construction Equipment with Digital Pictures and Video in a Clean Indoor Facility. Radisson Resort Orlando-Celebration.

G.W. McGREW AUCTION COMPANY

www.mcgrewequipment.co m 717-428-0922 • ONLINE ONLY Fri., January 20, 2012 For: Construction Equipment and More!

IRAY AUCTIONS

www.iraymn.com 320-968-7230 • ONLINE ONLY Fri., February 3, 2012 • Foley, MN Fri., March 9, 2012 • Foley, MN Fri., June 8, 2012 • ONLINE ONLY Fri., July 27, 2012 • Foley, MN Fri., September 14, 2012 • Foley, MN Fri., November 30, 2012

IRON PLANET AUCTIONS

www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• ONLINE ONLY Wed., January 19, 2012 For: Construction Equipment • ONLINE ONLY Tues., January 25, 2012 For: Construction Equipment • ONLINE ONLY Wed., January 26, 2012 For: Construction Equipment • ONLINE ONLY Thurs., January 27, 2012 For: Construction Equipment • ONLINE ONLY Wed., February 2, 2012 For: Construction Equipment • ONLINE ONLY Tues., February 8, 2012 For: Construction Equipment • ONLINE ONLY Wed., February 9, 2012 For: Construction Equipment • Polk City, FL February 21-24, 2012 For: Construction Equipment • ONLINE ONLY Tues., February 22, 2012 For: Construction Equipment

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL Tues.-Wed., March 14-16, 2012 For: Construction Equipment

KEENAN AUCTION COMPANY www.keenanauction.com 207-885-5100 • Topsham, ME Thurs., January 19, 2012 For: Construction Equipment

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Cortland, NY Wed., January 25, 2012 For: Construction Equipment, Farm Machinery, Trucks and Trailers

• TBA – March 2012 For: 3 Day Spring Auction with 1000’s of lots!

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., January 26, 2012 For: Construction Equipment

STEFFES AUCTIONEERS INC. www.steffesauctioneers.co m 701-237-9173 • Blackduck, MN Wed., January 18, 2012 For: Tractors, Trackhoe, Excavators, Harvest Equipment and Attachments • West Fargo, ND Wed., February 22, 2012 For: Construction Equipment • West Fargo, ND Wed., January 18, 2012 For: Tractors, Trackhoe

VAUGHAN AUCTION GROUP www.vaughanauctiongroup.com 903-873-6777 • Wills Point, TX Thurs., February 2, 2012 For: Winter Contractor’s Public Auction

WESTERN CONSTRUCTION AUCTIONS INC.

www.mmaauction.com 800-763-2728 • Camden, SC Thurs., January 26, 2012 For: Absolute Auction for Cantey Construction

www.wca-online.com 760-731-7760 • Perris, CA Thurs., February 16, 2012 For: Construction Equipment • Perris, CA Thurs., April 12, 2012 For: Construction Equipment

MEEKINS AUCTION COMPANY

YODER & FREY AUCTIONEERS, INC.

MARTIN & MARTIN AUCTIONEERS, INC.

www.meekinsauction.com 800-499-6560 • Greenville, NC Thur., February 23, 2012 For: Construction Equipment and Trucks

www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 6-13, 2012 For: 38th Kissimmee Florida Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 35

BusinessCalendar

TUESDAY, FEBRUARY 21, 2012 – KIRBY-SMITH MACHINERY, INC. PAVING SEMINAR. KIRBY-SMITH MACHINERY, INC. 2012 Annual Paving Seminar 8:00 AM to 3:30 PM (Lunch Provided). (Please note: 7:30 AM Registration.) Seminar will include topics on Milling, Compaction 101, Paving 101, Stabilizers, Advanced Compaction and Advanced Paving. LOCATION is at the Arlington Convention Center, 1200 Ballpark Way, Arlington, TX 76011. Cost is FREE!!! Reservations Required by February 10th. Call Danelle Cochran at 214-371-7777 or 800-753-1247. AGC of America Annual Convention Registration is now open for the AGC of America Annual Convention, being held in Honolulu March 13 – 17.

AGC of AMERICA is pleased to offer a wide variety of meetings, events and seminars for construction professionals that can help you improve every aspect of your business. EVENTS LISTING: 1/18/12 – Webinar “Maximize Mediation Webinar”; Webinar 1/30/12 to 2/1/12 – Conference and Convention Risk Management “2012 Conference on Surety Bonding and Construction Risk Management”; Naples, FL. AGC St. Louis Construction Leadership Council 2012 Mardi Gras Float – “Three Little Pigs” Enjoy the excitement of the Soulard Mardi Gras Parade as you ride on the Construction Leadership Council float on Saturday, February 18th. Cost: $80 per float rider. Price includes beer, beads and a great ride on the CLC float in the famous Soulard Mardi Gras Parade!!! Limited availability on the float. First come, first served. Come out and join us for a great time!!! SAVE THE DATE! The AGC of St. Louis ANNUAL RECEPTION is Thursday, April 12th, 2012 at the St. Louis Union Station Marriott. Details will be available soon! AGC of St. Louis 2011 Chairman of the Year Congratulations to Chris Walker of Guaranatee Electrical Company on being named the 2011 Chairman of the Year! Chris served as the 2011 Construction Leadership Council

Chairman. The AGC of St. Louis would like to thank Chris for his hard work and dedication this past year!

***Are you looking for a special way to say “Thank You” to your staff for a job well done this year, or to a client who has remainded loyal to your services? GiftBridge Cards provide a true means to express your appreciation. More than a “cash” card that the recipient can use for gas or groceries, GiftBridge cards offer you the chance to give a gift that will be remembered by the recipient; an experience, from taking a loved one out to dinner and a movie, to taking a much needed vacation, to pampering themselves at a Spa or on the golf course. They are easily purchased thru AGC of St. Louis’ web portal, http://agcstl.giftbridge.com. You can purchase as many cards with a range of denominations and experience types, then have them delivered to your office. Show thanks to staff or clients and your support of AGC of St. Louis by purchasing these unique experience cards from GiftBridge and give someone something they will remember you by, this holiday season. Illinois Association of Aggregate Producers 1115 S. 2nd Street, Springfield, Illinois 62704 Phone: 217-241-1639 Fax: 217-241-1641 www.iaap-aggregates.org

Northeast Region (IDOT District 1) Tuesday, February 14 Al’s Steak House 1990 West Jefferson Street Joliet, Illinois

rounding states. For more information, please contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers, 1115 S. 2nd Street, Springfield, IL. Telephone: 217-241-1639; Fax: 217-241-1641; Email: shawn@hansoninfosys.com.

Illinois Valley (IDOT District 3) Monday, March 5 Chapin’s Restaurant 701 N. Liberty Street Morris, Illinois

AGGI 2012 Aggregate Forum & Expo AGGI 2012 Aggregate Forum & Expo will be held in Charlotte, NC, March 12 – 15, at the Charlotte Convention Center in conjunction with the NSSGA Annual Convention. AGGI will colocate again with World of Asphalt for the third year. The synergy produced by these two events has been immense, with all who participated in prior events in total agreement about the benefits enjoyed from a natural industry fit between the two shows.

Northwest Region (IDOT District 2) Monday, March 12 Candlelight Restaurant 2200 1st Avenue Rock Falls, Illinois Northeast Region (IDOT District 1) Monday, March 19 Westwood Tavern and Tap 1385 N. Meacham Road Schaumburg, Illinois

2012 – IAAP Grassroots Meetings Please consider attending one or more grassroots meetings in 2012 hosted by the IAAP Legislative Committee. You will also have the opportunity to meet State Senators and Representatives in attendance, as well as local county engineers, and hear about their concerns. Don’t miss these important opportunities! All meetings begin at 4 PM and end at 6 PM. All meetings begin at 4 PM and end at 6 PM on the date and location indicated below:

During each meeting the Illinois Department of Transportation’s regional engineer or senior staff member will provide unique insight regarding local road and bridge building projects as well as challenges facing illinois’ road program. You will also have the opportunity to meet State Senators and Representatives as well as county engineers and others working in the transportation construction industry and learn more about their concerns. For more information, please contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers, 1115 S. 2nd Street, Springfield, IL. Telephone: 217-241-1639; Fax: 217-241-1641; Email: shawn@hansoninfosys.com.

Southern Region (IDOT Region 5) Monday, January 23 Genkota Winery 301 N. 44th Street, Mount Vernon, Illinois

2012 – IAAP Convention – SAVE THE DATE! The IAAP’s 44th Annual Convention is scheduled for Tuesday, May 15, 2012, at the Crowne Plaza Hotel in Springfield, Illinois.

Capitol Region (IDOT Region 4) Monday, January 30 Lake Pointe Grill 1386 Toronto Road, Springfield, Illinois

IAAP Member Spring Thaw Safety Conference, March 6-7, 2012 Upcoming Spring Thaw/State Grants Safety Conference: March 6-7, 2012 at The Chateau Hotel in Bloomington, Illinois Presented by the Mine Safety and Health Administration (MSHA) and Illinois Department of Natural Resources-Office of Mines and Minerals (IDNR-OMM) at a new location in Bloomington, this annual conference promises to be very informative with topics of critical interest to aggregate miners, supervisors and safety professionals in Illinois and sur-

Central Region (IDOT Region 3) Monday, February 6 The Chateau Hotel 1601 Jumer Drive Bloomington, Illinois

Upcoming MSHA Contests MSHA’s North Central District will be staging a mine rescue contest for underground metal and nonmetal mines, and a separate first aid contest for surface and open pit mines, quarries, plants and mills. The mine rescue contest will be held on April 3-5, 2012 at the International Union of Operating Engineers Local 150 Apprenticeship and Skills Improvement Training Facility near Wilmington, IL. This is an indoor, climate controlled facility, and it is one of the finest venues in the country for a regional mine rescue contest. The first aid contest for surface operations will be held in Duluth, MN on May 17, 2012 at a venue to be determined. Our 2011 contest drew nine 2-person teams from six mining operations. We hope to grow the contest in 2012 to include more teams from more mines throughout the Midwest region.

2012 FLORIDA Contractor Associations Meetings Postings: Florida Prestress Concrete Association Winter Meeting, February 8 and 9, 2012, Lake Mary, FL. 2012 FTBA Construction Conference to be held March 20 and 21, 2012 - Double Tree Hotel in Orlando, FL. Location: Doubletree by Hilton at the Entrance to Universal Orlando 5780 Major Boulevard, Orlando, FL 32819. For more information please call 407-351-1000. 2012 Annual Asphalt Contractors Association of Florida Convention, June 21 to 23, 2012 at Orlando World Center Marriott, Orlando, FL. 2012 Annual Asphalt Contractors Association of Florida Convention, July 19 to 21, 2012 at UUCF Convention, The Ritz-Carlton Orlando, Grande Lakes, Orlando, FL.

Page 36 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cranes and excavators are ready to be bought at the December sale.

The supply of excavators is endless.

Ritchie Bros. Holds Sale in Ft. Worth

itchie Bros. held a sale Dec. 8 in Fort Worth, Texas. Highlights from the sale included a pair of 2005 Caterpillar 631G motor scraper that sold for an auction high $375,000 a piece. Also bringing in a high winning bids at the event were a 2001 Kobelco CK1000II 200,000 lb. crawler crane that sold for $310,000 and a 2008 Caterpillar 140M VHP motorgrader that sold for $225,000.

Eugene Dick (L) compares notes with Doug Johnson of Johnson Ag Inc., Litchfield, Minn., about this Skytrak 8042.

Shane Sanger Jr. and Sr. of S&S Ag Service, Milano, Texas, have taken a liking to this Cat D6R dozer to build dirt bike tracks. Weslie Scott of WesScott Inc., Cooper, Texas, is all smiles after taking a close look at this Ingersoll Rand PT240R rubber-tired roller.

Wally Pawlosdki of Wally’s Dozer Service in Corsicana, Texas, stops for a photo op next to this Komatsu 200 LC excavator.

Don Carter of C.N. Construction, Fort Worth, Texas, is on standby to answer all the questions about this FMC LS-518 crane for its owner.

Bill MacMillan, an independent contractor in Lake Worth, Texas, likes what he sees in this John Deere 670 B motorgrader.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 37

Page 38 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALLU GROUP.................................................................11

HYDRAULICIRCUIT TECHNOLOGY ............................15

CEG SCALE MODELS.....................................................9

IRON PLANET................................................................37

CLASSIFIEDS.................................................................32

JAMES G MURPHY CO.................................................35

CLIFFORD POWER SYSTEMS INC...............................8

KAWASAKI CONSTRUCTION MACHINERY................18

CONSTRUCTION EQUIPMENT COMPANY ...............27 CONSTRUCTION EQUIPMENT GUIDE TARGETED EMAIL .................................................29

KOMATSU AMERICA CORP .........................................39 LBX .................................................................................20 MIDCO DEMOLITION TOOL CO...................................28

WANTED .................................................................33 NORAM...........................................................................23 DARR EQUIPMENT CO.................................................11 NPK CONSTRUCTION EQUIPMENT INC....................17 DOOSAN INFRACORE AMERICA CORP ....................16 RECS ................................................................................8 DOOSAN PORTABLE POWER .....................................24 ROAD BUILDERS MACHINERY ..................................7,8 DYNAPAC .......................................................................12 ESCO CORP ..................................................................15 FELLING TRAILERS ......................................................31 FLANGE LOCK.................................................................2

ROAD MACHINERY CO ................................................40 SCHAEFER ENTERPRISES .........................................12 SENNEBOGEN ..............................................................22

FLECO ATTACHMENTS ................................................15

SOLIDA-WERK.................................................................5

FLUID CONTROL SERVICES .........................................6

TOM GROWNEY EQUIPMENT INC ...............................2

GRINDERCRUSHERSCREEN.COM ............................28

TOPCON POSITIONING SYSTEMS...............................6

HENDRIX MACHINERY LLC ...........................................3

U-SCREEN .....................................................................28

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2012 • Page 39

KIRBY-SMITH MACHINERY INC.

TIER 4 INTERIM From Komatsu—The Engine Experts

6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 www.kirby-smith.com

POWER MOTIVE CORPORATION 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Fax: 303-388-9328 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-339-4098

Nonstop Production – Brought to you by the experts who have set the standard for dependability, long life, low operating costs and fuel efficiency. Dependability UÊ >À`Ü>ÀiÊ> `ÊV ÌÀ ÊÃÞÃÌi ÃÊ`iÃ } i`Ê> `ÊLÕ ÌÊLÞÊ >ÌÃÕÊ

Operator EaseÊ Ê

UÊ iÃi Ê*>ÀÌ VÕ >ÌiÊ ÌiÀÊÀi}i iÀ>ÌiÃÊ>ÕÌ >Ì V> ÞÊÜ Ì Ê Ê>VÌ ÊÀiµÕ Ài`ÊLÞÊÌ iÊ «iÀ>Ì À

Ê Ê

UÊ } iÊ>VVi iÀ>Ì Ê ÃÊ Ì Vi>L ÞÊv>ÃÌiÀÊ`ÕiÊÌ Ê >ÌÃÕÊ6>À >L iÊ i iÌÀÞÊ/ÕÀL V >À}iÀ UÊ ÕÌ >Ì VÊi ÃÃ ÊV ÌÀ ÃÊ > Ì> ÊÃ> iÊ«iÀv À > ViÊ iÛi ÃÊ`ÕÀ }ÊÀi}i iÀ>Ì

Ê Ê

Ê Ê Ê

High PerformanceÊÊÊÊ

Robust controlsÊ UÊ Þ`À>Õ VÊ>VÌÕ>Ì ÀÃÊ«À Û `iÊÌÀ ÕL i vÀiiÊ«ÀiV ÃiÊV ÌÀ Ê vÊ Ý >ÕÃÌ ÊÊÊ >ÃÊ,i}i iÀ>Ì Ê> `Ê >ÌÃÕÊ6>À >L iÊ i iÌÀÞÊ/ÕÀL V >À}iÀÊ

Low

Ê Ê Ê

UÊ `i Ì V> Ê`À> Ê ÌiÀÛ> Ã UÊ" ÞÊÌÜ Ê iÜÊ > Ìi > ViÊ Ìi Ã\ÊÊÊ Ãi`Ê À> V>ÃiÊ6i Ì >Ì ÊÊÊ> `Ê >ÌÃÕÊ iÃi Ê*>ÀÌ VÕ >ÌiÊ ÌiÀ

Maintenance Ê

www.komatsuamerica.com

Costs

ROAD MACHINERY LLC 4710A E. Elwood • Suite 6-7 Phoenix, AZ 85040 602-252-7121 Fax: 602-253-9690 Gilbert, AZ 480-545-2400 Tucson, AZ 520-623-8681 Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 El Paso, TX 915-872-1001 Bakersfield, CA 661-695-4830 Perris, CA 909-355-3600 Redding, CA 530-229-3822 Sacramento, CA 916-375-3540 Cananea, Sonora, Mexico 011-52-6453328300

WAUKESHA-PEARCE INDUSTRIES, INC. 12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 www.wpi.com

Page 40 • January 14, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Value Priced • Quality Equipment

Call Gary or Wendy Today

For more details on our used equipment visit www.roadmachinery.com/equipment

866-400-5250

2005 KOMATSU PC200LC-7, Stk# EMD60, 1749 Hrs, Cab with A/C......................................................................................$95,000

2007 KOMATSU WA500-6, Stk# EM7623, ROPS, Cab, 7107 Hrs ........ ..................................................................................................$249,000

2009 KOMATSU D61EX-15E, Stk# EMD267, 1768 Hrs, Cab, PAT Blade, Multi Shank Ripper................................................$149,000

2001 KOMATSU WA320-3MC, Stk# EMD7052, Cab, 6098 Hrs ...... ..........................................................................................$75,000 All certified machines include a minimum of 30 days powertrain warranty. All certified machines include the following financing (OAC). Subject to change without notice. 12 Months - 3.5% • 24 Months - 4.5% • 36 Months - 5.5% • 48 Months - 6.5%

Dozers

Year STK#

Hours

KOMATSU D61EX-15

2007

EMD290 3630

$119,000

KOMATSU D61PX-15

2007

EMD297 2052

$112,000

KOMATSU D65EX-15E

2007

EMD294 1728

$165,000

KOMATSU D61EX-15E

2009

EMD267 1768

$149,000

KOMATSU D51EX-22

2007

EMD7022 2644

$119,000

KOMATSU D61PX-15

2009

EMD7386 2683

$142,000

Excavators Crawlers

Year STK#

Hours

Price

SOLD

Price

KOMATSU PC400LC-7EO 2006

EMD10

3712

$165,000

KOMATSU PC200LC-7

2005

EMD61

2679

$85,000

KOMATSU PC200LC-7

2005

EMD60

1749

$95,000

KOMATSU PC400LC-7E

2007

EMD42

4463

$175,000

KOMATSU PC300LC-7EO 2007

EMD250 2775

$175,000

KOMATSU PC300LC-7EO 2007

EMD251 3259

$175,000

KOMATSU PC200LC-8

2007

EMD229 1365

$142,105

KOMATSU PC220LC-8

2007

EMD66

2616

$135,000

KOMATSU PC220LC-8

2007

EMD67

1528

$149,000

KOMATSU PC220LC-8

2007

EMD80

2432

$129,000

Wheel Loaders

Year STK#

KOMATSU WA320-3MC

2001

EMD7052 6098

$75,000

KOMATSU WA500-6

2007

EMD7623 7107

$249,000

KOMATSU WA500-6

2007

EMD7624 6325

$249,000

Hours

2007 KOMATSU D65EX-15E, Stk# EMD294, 1728 Hrs, ROPS Cab, Straight Blade ..................................................................$165,000

2005 KOMATSU PC220LC-8, Stk# EMD81, 3408 Hrs, Cab w/AC, 19’2” HD Boom, 10’0” HD Arm, 31.5 Triple Grouser Track $129,000

2007 KOMATSU PC300LC-7EO, Stk# EMD250, 2775 Hrs .............. ........................................................................................$175,000

Price

2007 KOMATSU D61PX-15, Stk# EMD297, 2052 hours, Open ROPS Cab, 34” Shoes ......................................................$112,000 Corporate Headquarters

Komatsu Remarketing Certified Used Equipment

Arizona

Used Equipment Inquiries

Komatsu Distributor

www.roadmachinery.com/equipment

Contact

Gary Beal Used Equipment Manager 866-400-5250 gbeal@roadmachinery.com

Wendy Schwertley Sales Administrator 602-256-5189 wschwertley@ roadmachinery.com

For all other inquiries contact your local branch

Gilbert 480-545-2400 Phoenix 602-252-7121 Prescot 928-778-5621 Tucson 520-623-8681

New Mexico Albuquerque 505-345-8383 Farmington 505-324-8601

4710A East Elwood, Suite 6 & 7 • Phoenix, AZ 85040 Phone: 602-252-7121 • Fax: 602-253-9690 www.roadmachinery.com

California Northern California Sacramento 916-375-3540 Redding 530-229-3820

Southern California Los Angeles, Orange, Riverside, San Bernardino and Ventura Counties 909-355-3600 Bakersfield 661-695-4830 Perris 909-355-3600

Texas

El Paso 915-872-1001

Mexico

Cananea, Sonora 011-52-6453328300