Western 24, November 21, 2021 by Construction Equipment Guide

$3.00

Published Nationally ®

Western Edition

November 21 2021 Vol. XXII • No. 24

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Link-Belt Hosts 2021 CraneFest Event...8

Bobcat of Marble Falls Celebrates Opening...20

The Cave Buttes Dam in Arizona experiences seepage through the embankment, which can cause flooding issues. Crews helped alleviate potential disaster by installing a 60-in. underground pipe by utilizing a 68-in. American Augers rock boring machine; an Akkerman SP400 jacking system and an Akkerman 524 haul unit.

Story on page 67 Topcon 3D-MC With Volvo Control Ups Precision...50

Experts Discuss Tips to Keep the Cash Flowing Contractors Increasingly Adopt Technology in Their Quest to Be Paid in Time, On Time

Table of Contents ................4

By Lucy Perry

Paving Section ............ 31-43 Trailer Section..............51-61 Business Calendar ............68 Auction Section ..........68-73 Advertisers Index ..............74

Cash flow is always an issue in the construction business, but this year it’s magnified by the pandemic, materials prices and supply bottlenecks. This year’s cash flow and payment report from Levelset found that only one in 10 contractors get paid in full. There are ways to reduce the time and effort you put into chasing payments — if you’re ready to adopt technology. That one in 10 represents a 75 percent drop from pre-pandemic payment patterns, according to the Construction Cash Flow & Payment CEG CORRESPONDENT

Third-party payment services can mitigate the bottlenecks in materials procurement and logistics. The sooner the contractor can acquire inventory the cheaper the future project will be.

Report, released annually by Levelset. “The decrease in payment reliability is tightening the financial vise on construction companies,” said the New Orleans-based construction software developer. More than 760 construction professionals were surveyed. The results tie financial risk directly to the construction payment chain. The survey found that general contractors at the top of the chain are four times more likely than subcontractors to get paid within 30 days and 50 percent more likely to get paid in full. see MONEY page 44

Page 2 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

heavy equipment

Armor PROTECTION YOU CAN COUNT ON!

Heavy Equipment Armor is the FIRST and ONLY company dedicated to building ballistic window/ door, top guard, and cab guard products for heavy equipment. Whether your machine is moving dirt with a bucket, lifting materials on the job site, masticating, demolition, or doing a specialized job with an attachment; You can count on HEA ballistic window and cab guards protecting your assets! Our enhanced guarding will be there to help protect the operator and the heavy equipment. Ƥ ǡ ǡ ǡ Ǥ

Our enhanced products like our cab guards for excavators and skid steer armor add another safety protection level for the operator and the machine. A company’s most valuable asset is protected – It’s PEOPLE. This, in turn, reduces injuries which reduce business costs and disruption. Our heavy equipment protection also improves work quality. Insurance claims decrease in safe work environments with Heavy Equipment Armor’s enhanced cab guards and ballistic windows.

TOP PRODUCTS Ballistic Defender Door or Window for Excavators or Skid Steers Bolt on Window Screen for Excavators

Bolt on Skeleton Front Door for Skid Steers Enhanced Guarding for both Excavator and Skid Steer

The 2022 HCEA Calendar Is Available!

Featuring 12 beautifully restored 8”” x 10” black-and-white photographs of construction and m mining machiner y fro the early and mid 20th Centur y. Available

It’s the only calendar of this type oﬀ ﬀer ered! Order yours today!

NOW!

ONL LY Y $10 EACH, POSTAGE G PAID PAID D WITHIN THE US SA* * $4.50 US postage for one calendar to Canada, $8.00 for all other countries. Call for quantity rate

Order onlline i at ht tp:/ // /store.hc hceastore.com/calendars .html, by ma p a y m e n t m a d e t o t h e H C E A a t 1 6 6 2 3 L i b e r t y H i Ro a d , B o w l i n g G r e e n , O h i o 4 3 4 0 2 , o r w i t h yo u r c r e d i t c a r d b y p h o n e a t 4 1 9 - 3 5 2 - 5 6 1 6 .

Dealers! Contractors! Produc cers! Customized for your business Makes a great holiday gift!

Promote your bu usin siness year a -round with your own customized HCEA Calendars! Custom imprints avvail ailable in quan ntities of 50 0 aatt discounted price.

Call us at 419-352-56 616 for details.

THANK YOU FOR YOUR SUPPORT!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 3

"In Business for over 33 Years" www.hendrixmachineryllc.com 2019 Case 580N, Stk#: 12627, OROPS, 4WD, 865 hrs., 4&1 Front Bucket, Ext-hoe ......$78,500

2009 Broderson IC80-2H, Stk#: 12456, 18,000 lbs., 46 ft., 1,352 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla Español

2017 John Deere 750K LGP, Stk#: 12928, 2014 Laymor SM400, Stk#: 12756, EROPS, A/C 2015 Dynapac CA1500, Stk#: 12526, EROPS, A/C & Heat, AM/FM Radio, 66" Smooth Drum, EROPS, A/C & Heat, Radio, 6 Way Blade, 80% & Heat, 567 hrs., Water System, 8 ft. Broom, U/C, 4,074 hrs., 34" Pads, 12 ft. Wide $142,500 225x75Rx15 Tires, 4 Cyl. Kubota Eng ....$29,500 267 hrs., 14.9x24R3 Tires, 4 Cyl. Deutz ..$69,500

2018 John Deere 650K LGP, Stk#: 12883, 2015 Bomag BW211D-50, Stk#: 12686, 84" Pad 2017 Cat 330FL, Stk#: 12879, EROPS, A/C & EROPS, A/C & Heat, Radio, 6 Way Blade, 2,550 Drum, 2,026 hrs., 23.1x26R3 Tires, 4 Cyl. Deutz Heat, Radio, 4,585 hrs., 90% U/C, 34" Bucket, hrs, 80% U/C, 24" Pads, 10' 4" ft. Blade..$99,500 Eng ........................................................$66,500 32" Pads, Aux. Hyd., 11' 2" Wide ........$139,500

2019 Kobelco SK140SRLC-5, Stk#: 12894, EROPS, A/C & Heat, Radio, 3,063 hrs, 80% U/C, 2012 Cat CT660S, Stk#: 12785, 2,980 hrs., 42" Bucket, 24" Pads, Steel Tracks w/Rubber ...... 6x4WD, 4,000 gal. w/Front & Rear Spray Bars, ..............................................................$92,500 VIN: 1HSJGTKR6CJ062961 ..................$89,500

2011 Volvo A25E, Stk#: 11745, EROPS, A/C & Heat, 6WD, 11,000 hrs., 25 Ton Cap., 23.5Rx25 Tires ......................................................$95,500

2009 CAT TL943, Stk#: 12943, 9,000 lbs., 43 ft., 2,706 hrs., 13.00x24x850 Solid Tires........$42,500

2018 Cat D6N LGP, Stk#: 12876, EROPS, A/C & Heat, Radio, Sweeps, Rear Screens, 6 Way Blade, 3,647 hrs, 33" Pads, 13'4" Wide ............$179,500

2018 Cat 259D3, Stk#: 12950, OROPS, 2,241 hrs., 6' 2" Bucket, 12" Tracks ................$42,500

2019 Link Belt 210X4EX, Stk#: 12895, EROPS, 2007 JLG 600A, Stk#: 12144, 500 lbs., 60 ft., A/C & Heat, 3,209 hrs., 80% U/C, 48" Bucket w/Hyd. Thumb, Aux. Hyd., 32" Pads, 12 ft. Stick, 2,394 hrs., 355x55Dx625 Foam Filled Tires, 4 Cyl. 2014 Cat 740B, Stk#: 12968, EROPS, A/C, 10' 6" Wide ..........................................$126,500 Deutz Eng ................................................$22,500 10,777 hrs., 29.5Rx25 Tires ..................$169,500

2013 Toyota 7FDV35, Stk#: 12809, 7,000 lbs., 4,026 hrs., 48" Forks 48" Frame, 250-15/7.00 Front Tires, 7.00x12/5.00 Rear Tires, 6 Cyl. Diesel Toyota Eng. ................................$12,500

2015 Cat 12M3, Stk#: 12898, EROPS, A/C & Heat, Radio, 6,678 hrs., Front, Hyd., 14 ft. M/B, Ripper, 17.5x25 Tires, 90% Tires ........$139,500

2004 Yale GLP060VX, Stk#: 12914, 5,450 lbs., 10 ft., 48" Forks, 44" Frame, 28x9x15 Front Tires, 5.60x10 Rear Tires, Vortec 2400 GM Eng. ..............................................................$12,500

2018 John Deere 850K WT, Stk#: 12931, EROPS, A/C & Heat, Radio, S/U Blade, 3,463 2000 Cat 924F, Stk#: 12113, OROPS, 6,423 hrs., 3 Shank Ripper, 30" Pads, 85% U/C, 10 ft. hrs., 94" Bucket, 17.5x25 Tires..............$29,500 Wide ....................................................$198,500

2010 Cat 120M, Stk#: 12838, EROPS, A/C & Heat, Radio, 8,378 hrs., 14 ft. M/B, Front Implement Attachment ........................$102,500

2015 Volvo SD115, Stk#: 12906, OROPS, 84" Vidratory Smooth Drum, 2,489 hrs., 90% Tires, 28.1x26Rx3 Tires, 6 Cyl. Volvo Eng ......$59,500

2014 Bomag BW211D-50, Stk#: 12214, 84" Smooth Drum, 810 hrs., 23.1x26 Tires @ 50%, Deutz Eng...............................................$59,500

2013 Cat 12M2 AWD, Stk#: 12902, ALL WHEEL 2010 JLG 600AJ, Stk#: 12136, 500 lbs., 60 ft., DRIVE, EROPS, A/C & Heat, Radio, 8,243 hrs., 2,928 hrs., 355x55Dx625 Tires, 4 Cyl. Deutz 14 Ft. M/B, 17.5x25 Tires @ 90%, Front Aux. Hyd. Front Push Block ........................$119,500 Eng.........................................................$29,500

2014 John Deere 650K LGP, Stk#: 12949, EROPS, A/C & Heat, Sweeps, Screens, 6 Way Blade, 2,088 hrs., 80% U/C, 10' 4" Wide..........$82,500

2012 Genie S40, Stk#: 12106, 500 lbs., 40 ft., 3,307 hrs., 12x15.5 Foam-Filled Tires, 3 Cyl. Deutz Eng ..............................................$26,500

2009 Broderson IC80-2H, Stk#: 12449, 18,000 lbs., 46 ft., 1,066 hrs., 10 ft. JIB, 4WD, 4WS, 69 2015 JCB 510-56, Stk#: 12712, 10,000 lbs., 56 ft., 6,130 hrs ............................................$49,500 hp., 10.00Rx15 Tires ............................$21,500

2016 Cat 326FL, Stk#: 12910, 60 ft. Long Reach, EROPS, A/C & Heat, Radio, 4,697 hrs., 90% U/C, 60" Ditching Bkt, 32" Pads, 11' 2" Wide $159,500

2011 Cat D6T XL, Stk#: 12946, EROPS, 8,899 hrs., A/C & Heat, Speakers w/ No Radio Installed, 128" Semi U Tilt Blade, 80% U/C, w/ 2019 Cat 903D, Stk#: 12933, OROPS, 3rd Valve Ripper, 24" Pads ..................................$109,500 Hyd., GP Bucket ....................................$49,500

2018 Cat 259D3, Stk#: 12951, OROPS, 2,075 hrs., 74" Bucket, 14" Tracks ..................$42,500

2012 Broce KR350, Stk#: 12921, EROPS, A/C & Heat, 1,039 hrs., 8 ft. Broom, Water System, Front Blade, LT225x75Rx16 Tires @ 90%, 4 Cyl. Kubota Eng. ................................$26,500

2016 Cat CS54B, Stk#: 12900, OROPS, 84" Pad Drum, 2,428 hrs., S70x75x26R3 Tires, 4 Cyl. Cat Eng. ..........................................................$89,500

Page 4 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FEATURES

IN THIS ISSUE 20

Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

LINK-BELT HOSTS 2021 CRANEFEST AT ITS LEXINGTON, KY., HQ

Link-Belt held CraneFest 2021 at its headquarters in Lexington, Ky., Sept. 27 to Oct. 1. The event was staged in two-day sessions with representatives from the company’s dealer network, rental houses and end users in attendance.

WESTERN EDITION

JOHN DEERE INVESTS IN RENEWABLE FUEL TECHNOLOGY

ARTBA NAMES NATIONAL CONTRACTOR SAFETY AWARD WINNERS

BIZ PLANS TO TRANSFORM FHWA’S CAPITAL PROGRAM MANAGEMENT

John Deere has made an equity investment in ClearFlame Engine Technologies, a start-up dedicated to developing clean engine technology. This solution enables low-carbon fuels to be integrated into compression ignition engines.

Transportation construction companies from three states were recognized for their outstanding employee safety programs during the American Road & Transportation Builders Association’s Annual Convention, held in Pinehurst, N.C.

Aurigo Software announced it had entered into a 10-year contract with the Federal Highway Administration (FHWA) Office of Federal Lands Highway (FLH) to modernize capital roadway construction planning and management.

Hitachi Construction Machinery Co. Ltd. has been renamed Hitachi Construction Machinery Loaders America Inc., the U.S.-based consolidated subsidiary in charge of the manufacturing and sales of Hitachi branded wheel loaders.

Kirby-Smith Machinery Inc. continues to add to its growing used equipment department with the hiring of Jesse Olmeda as remarketing and used equipment manager. Olmeda will be located in Oklahoma City and report to David Mehrtens.

State environmental regulators have cleared the way for work to continue on a multimillion-dollar ventilation shaft at the federal government's underground nuclear waste repository in southern New Mexico.

Compact Construction Equipment LLC, the authorized Bobcat equipment dealer in south, central and west Texas, celebrated the grand opening of its newest branch location in Marble Falls, Texas, on Oct. 29.

LeeBoy recently announced the winners of its 2020 Dealer Awards. Among the categories were top dollar volume dealers; top paver dealer; top tack tank dealer; top product support dealer; and more.

After 49 years in the foundation construction industry, Mike Elliott has announced his decision to retire. Elliott started his construction career with Mississippi Valley Equipment in 1972.

ASV Holdings Inc., a manufacturer of all-purpose and all-season compact track loaders and skid steers, introduced maintenance kits for simple and convenient ASV machine parts purchasing and maintenance.

A 27-year veteran of Hyundai, Park previously held various field and executive-level leadership roles, most recently as the vice president of marketing and dealer development.

The semi-autonomous digging functionality offered by Volvo Active Control on the Dig Assist suite of tools from Volvo CE can now be used with Topcon 3D-MC software on applicable models.

WHEEL LOADER MANUFACTURER TAKES ON NEW COMPANY NAME

KIRBY-SMITH MACHINERY ADDS OLMEDA AS REMARKETING, EQUIP. MANAGER

BOBCAT OF MARBLE FALLS CELEBRATES ITS GRAND OPENING

FOUNDATION CONSTRUCTION INDUSTRY VET RETIRES

HYUNDAI CONSTRUCTION EQUIPMENT WELCOMES PARK AS NEW PRESIDENT

Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Petrik Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

N.M. OFFICIALS APPROVE $100M NUCLEAR WASTE CONSTRUCTION

LEEBOY HANDS OUT HARDWARE AT DEALER AWARD CEREMONY

ASV’S OEM MAINTENANCE KITS PROVIDE CONVENIENT, ALL-IN-ONE SOLUTION

TOPCON 3D-MC WITH VOLVO ACTIVE CONTROL UPS PRECISION

TRAILER SECTION

54 60

CONSTRUCTION EQUIPMENT GUIDE’S 2021 TRAILER CHARTS FACTORS TO CONSIDER WHEN INVESTING IN A RENTAL TRAILER

KEEP THESE BENEFICIAL TRAILER MAINTENANCE TIPS IN MIND

DEPARTMENTS

68 70

BUSINESS CALENDAR

31 34

VOLVO CX01 Single-Drum Asphalt Compactor Concept

COMING AUCTIONS

EQUIPMENT GSSI

PaveScan Asphalt Density Assessment Tool

Dennis Hogeboom

Kent Hogeboom

Patrick Kiel

Sharon Swanson

• Colorado • Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

952/353-1770 612/481-8557 Cell e-mail pkiel@cegltd.com

760-518-4336 Cell e-mail sswanson@cegltd.com

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

BOBCAT, NATIONAL DISASTER SEARCH DOG FOUNDATION PARTNER

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

YouTube

602/679-8759 dennishogeboom@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 5

563-8 872-44112 112

Bellevue (Dubuque), Iowa sales@jjscheckel.com jscheckel.com RENT OR

BUY!

2015 CA ATT D11T - $988 $988,000 8,000

2002 CA ATT D11R - $185,000 $

2005 CA ATT D10TT - $388,000

Zero Hour Powertrain Componen p ts w// 4 yyearr,, 6,000 hr 7PZ High g Horse series, RRuns andd oper p ates to spec p , RJG S#, 1 Owner since new, LLow too midlife dl f componen p t l d SS factoryy Cat warrantyy. U BBlade, S Riippe pperr,, GGood UC. U-blade ipp . A//C /C, HHeat. Could pperr,, U blade, blade Twin Twin w tilt tilt, Well maintained, i i d bl d w// twin tilt, SSS ripper ld use hours, SS ripper Excellent hhistory,y, straight str i & clean. Availa b Jan. 2022. paint, otherwise very straight ilable i h tracttor from good home. Clean, straight, ai h and reputable machine. Priced to sell.

RENT OR

BUY!

2016 CA ATT D6T LGP - $28 $288,000 88,000

2015 Deere 1050K - $328,000 $

2019 CA ATT D D6T LGP VP PA AT - $268,000 $

2019 CA ATT 374FL 3 - $618,000

2019 CA ATT 336 Next Gen - $268,000 ,

4,650 hours, SU Blade, M Multi l Sh Shankk Ripper pp r,, Top opcon A02962. 3,960 Tootal hours. 2 Yeearr,, 2,000 hour h w warranty GX60 Full Auto GPS syst sy em comes withh machine. reemainingg until 9/2023. ARP Accugr g ade GPS readyy, hi Straight, clean & original M dirt machine. Goodd U/C, Clean nd original with doc documented hist history. iiginal i Midwest Cl and

RENT OR

BUY!

2013 CA ATT D6T XW - $288,000 ,

2017 CA ATT 390FL,, A002908 - $628,000

A02981. 2,161 Totall hours, h 695 at Idle, dl 1,466 actual A02952. 2,525 Hours, 744 Idle dl hhours, Only ly 1,781 6,885 Total hrs, 2,755 Idle dl hrss, 2 Year Year fac factoryy warrantyy. 3,663 Hours, 2 Years Years of of fac f factory y warrantyy remaining. 3,800 Hours, 1,367 67 IIdle dle hours, hours Warrantyy untill 9/2023. / i k new UC. C hi Grade control.l operatingg hours, Full 2 year factoryy warrrantyy remains, actual oper p atingg hours. GPS ready e y,y, AAllied W6G W Winch, 32’ Boom, 14’5”” SStick, 66”” 5 Yar Yard bucket, Like Reputa p tion 1 ownner machine. 2D Grade controol. 12’10”” Stick S . 60”” Bucket. B k 1 Ownerr,, S i ht bl Straight blade, histoory since 1 ownerr,, eexcellent conditioon, full documentation. 11’10” 0”” SStick. ti k 4 Yar Yard 60” bucket. buck Super clean machine! Original paint, DDocumented history,y, Clean C machine! d RRear winch, i Service hi i new. VPPAAT 66-way blade, bl d documeented history.

RENT OR

BUY!

2020 CA ATT 330 Next Gen - $$258,000 , 2018 CA ATT 320 Next Gen Geen - $$159,000 ,

1,138 Hours, 626 at idle, dl 2DD GGrade d Cont C trol,l AAuxiliary l y A02915. 2,450 Total Total hours, hours 1,593 Idle hours. h 2DD GGrade d hydraulics, Tool control, 10’6”” SStick,, 4 years remaining e control, Deluxe pack p age g , Factoryy warrantyy remaining. CAT Premier Warranty. Will not dis 24”” BBucket S Auxilia l d appoint!! k , 9’6” ’ ” Stick, l ary hydraulics.

2017 Deere 210G G LC - $$126,000

1,760 Hours, Local trade-inn, 9’6”” Stick S k. 48”” 1.3 Yar Yard bucket. Deluxe cab. Offered wholesale. Compare pricing for saame year and hours.

2014 CA ATT MH3059 M - $348,000 ,

8,250 Hours, Material handlerr,, as nice as they h y come. li cabb, 325 HPP,, Ground access and high g rise hydraulic 35’’ Boom, 29’’ Stick, S k Setup foor grapple. 130,000 lbs.

(4)2016 ) Volvo A40G’s - $268,000 , EA. 55,400 400 Hour H truccks, Half idle time, M Matching h groupp. V y ggoodd Tailga g tes, 1 Ow wnerr,, Excellent Ex condition. Very R d tires. Ready to Radial t go. Rent/Lease or Buy B y..

RENT OR

BUY!

2010 CA ATT 740 - $148,000 000

((2)2014 ) CA ATT 730C’ 730C’s - $358,000 $$358 000 EA. EA

B POWERTRAIN PLUS REBUILDS

ROLLERBLADES HOLMES SMOOTH DRUM R

Special App pplication Haul Truck, B1P Series,10,900 Hrs, Ej Ejec j tor bodies, b di 8835 & 1,418 Hourrs. 1 Owner. RRadial d l light material bodyy with tailgggate, Radial 80 Yar Yard ligh tiri es. Original g pain p t. All maintenaance historyy. Super p tires, wned. clean, original, i 1 Owner prior i municipal i i l ow i l low l hour h trucks. Reent/Lease or Buy. B

2016 CA ATT 980M M - $268,000

7,650 Hours, 2,671 in neutr utral,l Onl nlyy 4,979 , actual buck RRide workingg hours. Radials, 7..5 Yar Yard GP bucket, control,l Auto er main maintained, History. A grease, Dealer

2018 V Volvo olvo L180H - $238,000

A02916. 6,250 HHourrs, 6.5 Yar Yardd GP bucket b k , 330 HPP,, 62,000 lbs, Auxillaryy hydaulic controls, Volvo dealer inspected. Clean andd str straight, original machine.

RENT OR

BUY!

NEW!

2007 CA ATT 826H - $288,000 $ ,

9,800 Hours on Complet pl e DDealer l Rebuild. R b ld Good G d used compac p tor w/ fullll main maintenance & service history. E ll feett, Clean cab, Tested to OEM specs. Excellent

RENT OR

BUY!

Ready to ship!

Holmes 11F - $25,50 , 0 / 16F - $31,500 $

2011 CA ATT 140M VHP V - $$248,000 , Verified 735 total hours, 4551 Idl dle hhours, Only ly 284 2 Models, 11’ or 16’’ cuttingg width. Made in Iowa. 2006 CA ATT D10T Rebuild Inn Process Constr i id . i g hours h . From m state DOTT,, Store inside uction i grade d , extreme dduty. For haul h l rooadd & siti e actuall workking - $885,000. Zero hour Powertrain Plus, M ldb d, Mid-moun t Scarafier fi V Riipper. Tiier 33. id di t prior lleveling li , compacting i & sealing li ddir i to rain i event. 14’ Moldboar OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

visit

JJSccheckel.com

C 1237 ADT - $198,000 2016 Volvo A40G & 2018 K-T K Tec ec 1237 2018 K-TEC Yard capacit p y ppull scraper p r,, LLess e than h 800 hours. h Scraper p Pkg g - $$500,000 , 5,,906 hours on 37 Yar

il bl b Super M ching Mat hi g ppair airi available, p clean. l Can be truckk. 2 Sets Riigged gg d upp & reeady dy to go g . 37 yard scraper p w/ A4 for o rent/sale V l o A40G / l for f addt’l ddt price. b included. l d d rigged to a Volvo hitch & controlsl kit kit, orig iginal i l ttruckk dump d body included

and watch w our new company viddeo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaders, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com | follow us ffor @jjscheckel.com orr daily updates:

Page 6 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 7

#92948, 2017 BOMAG BW138AC-5, 1200 HOURS ....................................................$39,500

#93105, 2017 BOBCAT E85, HYD THUMB, 1575 HOURS ..........................................$84,500

#83217, 2015 KOMATSU PC228USLC-10, 2850 HOURS ........................................$159,500

#2021001DM, 2015 KOMATSU D39PX-23, 2400 HOURS............................................$85,000

#92881, 2013 KOMATSU PC390LC-10, 7900 HOURS ........................................$119,500

#92729, 2012 KOMATSU WA380-7, JRB QC. 4000 HOURS..........................................$127,000

#83398, 2014 KOMATSU PC210LC-10, QC, 4200 HOURS ..................................................$104,500

#82380, 2009 KOMATSU PC220 LONG FRONT, 5,950 HOURS ........................................$129,500

#92930, 2011 KOMATSU D51PX-22, 6 WAY BLADE, 3200 HOURS ..........................$127,500

#52030, 2016 KOMATSU PC490LC-11, AUX HYD, #92926, 2013 KOMATSU PC490LC-10, 8750 JRB QC, 5700 HOURS ..........................$192,000 HOURS, AUX HYD, QC ..........................$109,000

#93009, 2015 KOMATSU PC240LC-10, 7,750 HOURS, QC ............................................$79,500

#80768, PC300LC-7 LONG FRONT, 7400 HOURS ................................................................$99,000

#92180, 2012 KOMATSU D65EX-17, RIPPER, SIGMA BLADE, 4700 HOURS ................$149,500

#92983, 2013 KOMATSU D65WX-16, CAB/AC, RIPPER, SIGMA, 6700 HOURS ..............$94,500

#93089,2020 TAKEUCHI TB290, AUX HYD, HYD THUMB, 455 HOURS ............................$104,500

Page 8 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt Hosts 2021 CraneFest Event at Its Headquarters

ink-Belt Cranes held CraneFest 2021 at its world headquarters in Lexington, Ky., Sept. 27 to Oct. 1. The event was staged in two-day sessions with representatives from the company’s dealer network, rental houses and end users in attendance to learn about Link-Belt’s historic beginnings, manufacturing capabilities and lineup of world class cranes. On day one, Link-Belt hosted a reception and dinner at the Kentucky Headquarters of North America’s oldest Thoroughbred auction company, Fasig Tipton. The reception and dinner provided an excellent opportunity for attendees to network with peers and spend time with Link-Belt representatives. On day two, the Link-Belt executive team welcomed the group with opening remarks followed by video presentation which outlined Link Belt’s history, development and accomplishments. Attendees were then bussed to the Link-Belt Company world headquarters for a tour of the manufacturing facility. After the tour, attendees were led to

an outdoor staging area for a live presentation of Link-Belt’s product line, a key highlight being the introduction of four new cranes. Link-Belt introduced its new 85-ton (75-t) 85|RT rough-terrain crane. Powered by a Cummins Tier IV final QSB 6.7 270 hp (201 kW) diesel engine, the 85|RT transports under 105,000 lbs. with full counterweight and under 86,000 lbs. without counterweight. The 85|RT comes with a full power, fivesection formed boom 38 to 142 ft. (11.6 to 43.3 m) and an available two-piece LinkBelt SmartFly (35 to 58 ft. [10.7 to 17.7 m]) expands the flexibility and range. The company also introduced the new 65|HT, a 65-ton (55-t) capacity truck crane, which is equipped with a new four-section 36.5 to 115 ft. (11.2 to 35 m) full-power boom reaching a maximum tip height of 125 ft. (38.1 m). For greater maintenance efficiency, the new 65|HT has an all-new formed boom

(L-R): American Industrial Contractors’ Bo Bennington reviews the cranes with LinkBelt’s Gary Rice along with Rudd Equipment Company’s Justin Richardson.

with Link-Belt’s Teflon wear pads, eliminating the need to grease the boom. The 65|HT is powered by an EPA 2021 certified Cummins L9 engine delivering 260 hp (194 kW) at 2,000 rpm. Three optimized boom extend modes and a maximum counterweight of 18,700 lbs. (8,482 kg) offer outstanding capacity on the job site, according to the manufacturer. Link-Belt’s CraneFest also saw the launch of the 120|HT the company’s new 120-ton (110-t) base rated hydraulic truck crane. The four-axle 120|HT incorporates design elements of Link-Belt’s 175|AT all-terrain crane with a wider single occupant cab. Ride quality is a key ingredient for the 120|HT which comes by way of an allnew air ride suspension design, which was the result of Link-Belt’s design collaboration with suspension manufacturer Hendrickson International. The 120|HT’s air disc brakes, which improve performance and reduce maintenance time, are

Link-Belt’s full lineup of world-class cranes were on display at the company’s 2021 CraneFest.

(L-R, front): Paul and Bud Prillaman of Prillaman Crane and Rigging get the thumbs up from Paul’s sons, Paul (L, top) and Page as they reviewed the Link-Belt 100/RT at the event.

Alan Hogan of Superior Cranes speaks with Link-Belt Chief Financial Officer and Vice President of Finance Sandy Hammonds at the 2021 CraneFest.

another new innovation Link-Belt has introduced to the hydraulic truck crane market. Link-Belt Cranes new 55-ton (45-t) TCC550 telescopic crawler crane featuring a fullpower 36.5 to 115 ft. (11 to 35 m) four-section boom with two boom extend modes (EM1 and EM2) equipped with Link-Belt’s Teflon wear pads. Fly options include a 28.5 to 51 ft. (8.7 to 15.6 m) two-piece bi-fold lattice fly, stowable, capable of 2, 20 and 40 degrees offset and with a maximum tip height of 165.5 ft (50.44 m). Following Link-Belt’s presentation of its crane lineup, CraneFest attendees were treated to lunch, after which they had an opportunity to review the cranes up close while spending time with Link-Belt company representatives for a full run down on each of the models.  CEG (All photographs in this article are Copyright 2021 Construction Equipment Guide. All Rights Reserved.)

(L-R): Jon and Mercedes Zemlo of Jon’s Crane and Rigging caught up with Leroy Kane of Dawes Rigging and Crane Rental and Scott Teunissen of KSI Construction Inc. while reviewing the cranes.

(L-R): Link-Belt Cranes’ Andrew Soper and Thomas Trevithick of Nixon-Egli Equipment; Bragg Crane Service’s Steven Paden, Christian Coronel, Ian Johnson and Bill Green; and Nixon-Egli Equipment’s James Nixon review the newest addition to Bragg Crane Service’s fleet.

Link-Belt Crane’s Shawn Quinn (L) discusses design elements of Link-Belt’s HTC8675 hydraulic truck crane with Kurston Dowd of Crane Sales & Service.

Ed Protesto (L) of Pro Crane Rigging and Kelly Tractor Company’s Hugo Verez take in the cranes on display at Link-Belt’s 2021 CraneFest.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 9

MADE FO OR

AMERIC CA SERVIC CE THAT’S TS

LOCAL L SCHEDULE A DEMO O

TODAY Y WITH A LOCAL DEA ALER

Award Winning

SW405K

Page 10 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DISCOVER THE

YANMAR

GENUINE PARTS & SERVICE

ADVANTAGE YANMAR GENUINE PARTS are the only parts manufactured to YANMAR’s strict, leading standards in quality and durability, ensuring your machine continues to work as hard as you do. Contact us now to learn more!

DISCOVER YANMAR EXCAVATORS AT YOUR LOCAL DEALER: AGROLAND EQUIPMENT & SUPPLIES

GLACIER SUPPLY LAND & AG

www.agrolandeands.com Texas

www.glaciersupply.com Montana

512-291-3364

ASAP EQUIPMENT www.asapequip.com Texas

IDAHO IMPLEMENT 979-690-1106

B-C EQUIPMENT SALES www.bcequipment.com Texas

254-855-6242

707-463-1057

DITCH WITCH OF OKLAHOMA AND ARKANSAS www.ditchwitchok.com Oklahoma, Arkansas

405-348-4633

DITCH WITCH SOUTHWEST www.ditchwitchsouthwest.com Texas

www.kellyattachments.com Texas

www.raseq.com Utah www.rgwequipment.com California

936-294-0282

409-948-4497

www.riverbendeq.com Colorado

www.meridianutilityequipmentsales.com 916-880-5776

ROMCO

California

www.romco.com Texas

www.fredraderhawaii.com Hawaii

DITCH WITCH UNDERCON

PACWEST MACHINERY

www.dwundercon.com 800-582-1989 Texas, Kansas, Nebraska, South Dakota

www.pacwestmachinery.com Washington, Oregon

808-836-0881

775-235-4069

www.sherlockequipment.com Washington

360-689-2208

TIME RENTAL 801-972-5588

www.timerentalmt.com Montana

406-543-7136

VAN’S EQUIPMENT RENTAL & SALES 925- 606-2450

970-717-6062

ROCKY MOUNTAIN EQUIPMENT AND RENTAL www.rmerentals.com Wyoming

MERIDIAN

www.shaferequipmentco.com Nevada, Idaho

SHERLOCK EQUIPMENT SALES-RENTAL 575-769-8659

RIVERBEND SALES RENTALS PARTS SERVICE

MPS DISTRIBUTION HAWAII 432-617-8351

www.rsindinc.com New Mexico

RGW EQUIPMENT 210-932-9943

MAINLAND TOOL www.mainlandtool.com Texas

SHAFER EQUIPMENT COMPANY 541-884-0114

RASMUSSEN EQUIPMENT CO 559-733-2982

LONESTAR OUTDOOR POWER EQUIPMENT www.lonestaroutdoorpower.com Texas

DEFATTE EQUIPMENT RENTAL www.defatteequipment.com California

www.kaweahequipment.com California

www.powerpacrentals.com Oregon

R&S INDUSTRIES, INC 208-265-0415

KELLY ATTACHMENTS 800-956-6287

CONSTRUCTION EDGE EQUIPMENT www.construction-edge.com Texas

www.idahoimplement.com Idaho

KAWEAH EQUIPMENT CO 888-874-3940

CLAIREMONT EQUIPMENT www.clairemontequipment.com California

POWER PAC RENTAL & SALES 406-471-4791

307-684-2130

512- 388-2529

www.vansequipmentco.com Washington

360-755-0399

VERMEER SOUTHWEST www.vermeersouthwest.com Arizona

844-830-4193

VERMEER TEXAS-LOUISIANA www.vermeertexas.com Texas, Louisiana

866-898-3763

VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com California

951-277-7620

ROWE’S TRACTOR www.rowestractor.com Washington

509-886-3200

206-763-5933

© 2021 Yanmar America Corporation. YANMAR has a corporate policy of continuous product improvement and development; therefore data, specifications, and warranty are subject to change without any advance notice. There may be differences between the specifications and illustrations contained in this publication and the actual equipment. Equipment components produced by other manufacturers may be shown in photographs in this publication for the purpose of illustration only and is not intended as an endorsement of that particular equipment or its suitability. Inspect equipment before using it and be sure it is operating properly. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual. Before operating a machine, read, understand, and follow all instructions of the manual and on the machine. YANMAR disclaims all representations, express or implied, or any liability from the use of this publication.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 11

Page 12 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 13

Page 14 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

7TFI <NIJSJWX

2FYJWNFQ 9WFSXKJW ;JMNHQJX

10’ Commercial Pavers ѣ (TRRJWNHFQ 5F[JWX

<NYM T[JW ^JFWX TK J]UJWNJSHJ \J XUJHNFQN_J NS GZ^NSL FSI XJQQNSL ZXJI FXUMFQY UF[NSL JVZNURJSY

8’ Commercial Pavers ѣ (TRRJWNHFQ 5F[JWX

9FSIJR ;NGWFYTW^ 7TQQJWX

WEPIW$GEPZMRKVSYTMRG GSQ \\\ HFQ[NSLWTZUNSH HTR

&XUMFQY )NXYWNGZYTWX

(MNU 8UWJFIJWX

2NQQNSL 2FHMNSJX

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 15

WE HAVE YOUR NEXT OFF ROAD TRUCK Niece 8,000 gallon water tanks

installed on 40 ton Articulated Off Highway chassis. This combination is the workhorse of the dust control and water needs for quarries and large construction sites

NWT9500

The NWT9500 950 Gallon water tank mounted on articulated truck. Pictured: Deere 460E with 9,500 gallon tank. Tanks come with 6X5 pumps.

NFL3000

The NFL3000 Off Road, Fuel and Lube Bed offers 3,000 gallons of diesel fuel.

NFL10000

The NFL10000 Fuel & Lube Can be mounted on any 100,000 lb rigid frame truck. Holds 10,000 gallons of diesel. 5 additional fluid tanks. Holds up to 3,000 gallons of oil.

Page 16 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.trophytractor.com Agricultural Tractors

Dozers - Crawler

Off-Highway Trucks

Water Equipment - Trucks

2015 JOHN DEERE 6215R ..........................................................$139,500 (4) 2018/19 JOHN DEERE 6120M ......................................From $79,500 2018 JOHN DEERE 5125R..............................................................$98,500 (2) 2017 JOHN DEERE 5085M ............................................From $59,500

2012 CATERPILLAR D11T ..............................................................$CALL

(3) 2009-2010 CATERPILLAR 785D................................................$CALL

2017 CATERPILLAR D10T2, 3456 Hrs ......................................$995,000

(2) 1995 CATERPILLAR 777C ........................................................$59,500

2018 CATERPILLAR D9T..............................................................$805,000

Motor Graders

Artic Trucks

(3) 2018 CATERPILLAR D8T ............................................From $510,000

2020 CATERPILLAR 150AWD......................................................$407,500

2013 CATERPILLAR 740B ......................................................................$329,500 (3) 2014/15 CATERPILLAR 725C................................................From $249,500 2017 CATERPILLAR 725C2 ....................................................................$339,500 2019 FORD F750 ..........................................................................................$95,000 (2) 2007/15 FREIGHTLINER M2 ..................................................From $49,500 (18) 2018-20 KENWORTH T370 ..........................................From $89,500 (18) 2018-22 PETERBILT 348 ............................................From $119,500 VOLVO A25D ..................................................................................$119,500

(2) 2016 CATERPILLAR 745C ..............................................$309,500 Ea. (2) 2019 CATERPILLAR 745 ..................................................$465,000 Ea. (5) 2016-2019 CATERPILLAR 725C2 ..............................From $199,500 (2) 2014-15 CATERPILLAR 725C..........................................$189,500 Ea.

Compactors - Padfoot/Smooth Drum 2020 CATERPILLAR 815K ..............................................................$CALL 2007 CATERPILLAR 815F 2 ............................................................$CALL (4) 2013-17 CATERPILLAR CS66B ..................................From $129,500 (6) 2013-18 CATERPILLAR CP56B ..................................From $129,500 (4) 2017/18 CATERPILLAR CS56B ....................................From $64,500 2016 BOMAG VW177D-5 ................................................................$58,195 2019 HAMM H7IP..............................................................................$69,500

Crawler Carriers 2019 MOROOKA MST4000VD ....................................................$319,500 (2) 2018 MOROOKA MST3000VD ....................................From $229,500 (3) 2018/19 MOROOKA MST2200VD ..............................From $172,500 (2) 2019 MOROOKA MST1500VD ....................................From $149,500 MOROOKA MST660VD ..................................................................$89,500

2011 CATERPILLAR D10T, 11,778 Hrs ......................................$575,000

2020 CATERPILLAR D6 XL..............................................................$CALL

(2) 2017-19 CATERPILLAR 140M3 ................................................$CALL

(5) 2019/20 CATERPILLAR D6 LGP ................................From $425,000

2019 CATERPILLAR 16M3 ..........................................................$825,000

(4) 2014-19 CATERPILLAR D6T XW ................................From $159,500

2016 CATERPILLAR 14M VHP ....................................................$405,000

2015 CATERPILLAR D6N XL, 3235 Hrs ....................................$164,500

2007 CATERPILLAR 14H..............................................................$155,000

Wheel Loaders

2018 CATERPILLAR D6K 2XL ....................................................$185,000

Scrapers

2012 CATERPILLAR D6K XL ..........................................................$CALL

1980 CATERPILLAR 637D..............................................................$59,500

1991 CATERPILLAR 992C ..............................................................$CALL 2019 CATERPILLAR 982M ..........................................................$439,500 (2) 2018/2019 CATERPILLAR 966M ............................................$318,500 (2) 2018 CATERPILLAR 938M......................................................$169,500 2015 CATERPILLAR 914K..............................................................$69,500

2016 CATERPILLAR D6N LGP ....................................................$139,500

2000 CATERPILLAR 627F................................................................$CALL

Dozers - Wheel 2015 CATERPILLAR 834K............................................................$285,000

Skid Steers - Track (8) 2020-21 JOHN DEERE 333G......................................................$CALL

Excavators - Crawlers

Miscelleneous Equipment

(3) 2020 CATERPILLAR 299D3 XPS ..............................................$CALL

2015 CATERPILLAR 374FL..........................................................$395,000

(3) 2021 CATERPILLAR 299D3 ......................................................$CALL

(2) 2017/21 CATERPILLAR 349FL ....................................From $329,500

(6) 2014-18 CATERPILLAR 299D2 XPS ............................From $49,500

2019 CATERPILLAR 336 ..............................................................$289,500

2016 CATERPILLAR 242D..............................................................$39,500

2021 ROME TRCW16 ........................................................................$CALL 2018 ROME TRCW12 ......................................................................$48,500 2019 ROME TACW16........................................................................$36,000 2018 ROME TCW28..........................................................................$19,750 2018 ROME TCW32..........................................................................$23,000

2017 CATERPILLAR 336FL, 2941 Hrs........................................$215,000 2014 CATERPILLAR 329EL, 4134 Hrs........................................$159,500

Water Equipment - Tower/Tanks

2015 CATERPILLAR 323FL..........................................................$132,500

(4) 2020/21 Klein KPT-120 Water Towers ..........................From $54,500

(2) 2018/19 CATERPILLAR 320 ........................................From $179,500

Crawler Loaders

2017 CATERPILLAR 316FL..........................................................$169,500

Winch

(2) 2017-19 CATERPILLAR 963K......................................From $265,000

(2) 2019 CATERPILLAR 313FL ....................................................$139,500

PACCAR PA110VS245 ......................................................................$7,500

Authorized dealer for

John Deere Invests in Renewable Fuel Technology John Deere has made an equity investment in ClearFlame Engine Technologies, a growing start-up dedicated to the development of clean engine technology. ClearFlame’s solution enables low-carbon fuels like ethanol to be easily integrated into compression ignition engines, offering a more sustainable solution without compromising engine performance. John Deere’s investment is in line with its strategic vision to accelerate and lead the industry in low and zero carbon powertrain technology. John Deere also will supply an engine to use in conceptual testing, which will help validate the technology currently under development by ClearFlame. “We made this investment to stay on the leading edge of developments in renewable fuel technology,” said Pierre Guyot, senior vice president, John Deere Power Systems. “ClearFlame’s compression ignition engine technology has the potential to reduce CO2 emissions while continuing to provide the performance and durability our customers expect from John Deere engines.” “ClearFlame’s mission is to decarbonize

ClearFlame Engine Technologies Co-Founders Julie Blumreiter, chief technology officer; and BJ Johnson, chief executive officer.

the hardest-to-electrify sectors in a rapid and cost-effective way. Expanding our solution from heavy-duty trucking to agriculture and other off-highway markets delivers on that promise, offering significant sustainability and economic benefits that won’t compro-

mise engine performance,” said BJ Johnson, ClearFlame CEO and co-founder. “We look forward to working together with John Deere and supporting its commitment to reducing net CO2 emissions through providing renewable energy solutions.”

Using ethanol in place of petroleum diesel fuel in diesel engines significantly reduces carbon emissions and air quality emissions. In addition, ethanol is widely available and can offer a high-efficiency, liquid alternative fuel option. John Deere understands the importance for renewable fuel options and is committed to exploring new solutions. “Compression ignition engines have a long life ahead — in terms of both the current source of diesel and a wide variety of alternative fuel types,” said Guyot. “John Deere already offers biomass-based diesel compatibility on our engines. These investments are the right thing to do for environmental, economic and rural-development benefits.” Investments like this one are a critical component of John Deere’s vision to integrate smart and sustainable technology innovations with its legacy of manufacturing excellence. For more information, visit www.JohnDeere.com/jdpower and www.clearflameengines.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 17

Hitachi Construction Machinery Co. Ltd. renamed Hitachi Construction Machinery Loaders America Inc., Newnan, Ga., which is the U.S.-based consolidated subsidiary in charge of the manufacturing and sales of Hitachi branded wheel loaders in North America. The new company name is Hitachi Construction Machinery Americas Inc. The implementation of the company name change corresponds with Hitachi Construction Machinery’s plans to expand the functions and authority of Hitachi Construction Machinery Loaders America Inc. throughout the entire North, Central and South American region, and to develop a new promotion structure with group companies in the region. Such efforts are aimed at establishing an independent network of construction machinery sales and parts and services business operations for the entire North, Central and South American region. With the dissolution of the joint venture relationship between the Hitachi Construction Machinery Group and U.S.based Deere & Company starting in March 2022, Hitachi Construction Machinery aims to independently deploy the latest products, technologies and services across the entire North, Central and South American region, including machines equipped with state-ofthe-art hydraulic systems that achieve high efficiency, AERIAL ANGLE technology that improves work site safety and the ConSite OIL service solution. Accordingly, Hitachi Construction Machinery will conduct a thorough review of the organizational structure of Hitachi Construction Machinery Loaders America Inc., which has been in charge of the manufacturing and sales of Hitachi branded wheel loaders. The aim of such a review is to strengthen the position of the company as the regional headquarters handling all Hitachi Construction Machinery products, including wheel loaders, compact and construction-

sized hydraulic excavators, ultra-large mining excavators and mining dump trucks. Specifically, Hitachi Construction Machinery Loaders America will increase the number of staff, in order to significantly strengthen the structure of the sales and service sector functions and to more accurately respond to market needs throughout the entire North, Central and South American region. In the mining business, the company will collaborate with Hitachi Construction Machinery Group companies in the region to further develop the independent network in the North, Central and South American markets. In Japan, Sonosuke Ishii, senior vice president and executive officer, president of mining group, also has served as general manager of America Business Div. from Oct. 1. In America, with the establishment of Hitachi Construction Machinery Americas, Sonosuke Ishii, senior vice president and executive officer, has been also appointed chairman of the company, and Masaaki Hirose, former chairman, has served as vice chairman, working together with Alan Quinn, managing director, to strengthen cooperation between Japan and the America. At the same time, the Americas Business Expansion Support Office has been established to strengthen the North, Central and South America business through the Hitachi Construction Machinery Group. With the “Realizing Tomorrow’s Opportunities 2022” medium-term management plan, Hitachi Construction Machinery aims to strengthen the value chain business, provide enhanced solutions, and form highly flexible corporate structure. Going forward, Hitachi Construction Machinery will promote these management strategies in North, Central and South America, as well as in the rest of the world, in an effort to achieve stable growth. For more information, visit hitachiwheelloaders.us. 

RENTALS

HEAVY EQUIPMENT

Wheel Loader Manufacturer Takes On New Company Name

Serving the Construction & Mining Industries Since 1962

Former Rental Units for Sale:

2001 CAT 320CL, Ready to work, 24T HEX 1996 CAT 815F, Excellent, work ready 22 ton with reach boom, med stick, cab, AC, aux soil compactor with OROPS, S-Dozer w/ tilt, hyd. QC, 1000 hrs on new tracks ......$55,000 5200 hrs on rebuilt engine, 0hrs on newly rebuilt trans and 1200hrs on feet ....$149,000

2003 CAT D6R DS LGP, Excellent, series 2, LGP w/ cab, AC, 6S Dozer w/ tilt, drawbar, Almost new tracks w/ 50% 36" flat pads. Fully serviced and work ready ....................$79,000

1997 CAT D6R LGP, CAB, AC, 6S Dozer, 2003 CAT 330C, Work ready 40T HEX with DRAWBAR, 1200 hr on new UC w/ 36" FLAT reach boom, med stick, QC, GP Bucket, fully PADS, 2700 hr on engine rebuild. Runs great, serviced, Tier 2 engine ......................$69,000 former rental unit ..............................$65,000

2003 CAT 14H, Work ready, larger blade, fully equipped with cab, AC, pushblock, ripper, engine doors, 20.5-25 tires in good condition. 1 of 2 available ................................$149,000

1980 CAT 631D, 2000 hrs on CAT dealer re2012 TEREX TA300, Excellent, low hours, power 3408TA, T-2 engine, cab, AC, retarder, 30T 6x6 Artic with retarder, tailgate, backup 37.25x35 tires at 90%F, good rears. Excellent camera, supplemental steering, good tires. Work ready. One of two available ....$139,500 ..........................................................$99,000

2011 DEERE 544K, LOW Hours, cab, AC, QC with GP Bucket and Forks, in excellent condition, work ready ................................$82,500

(714) 340-1025 • Mike Kustura: sales@EccoEquipment.com

www.eccoheavyequipment.com

Santa Ana, CA – HQ (714) 554-4851

Visalia, CA (559) 651-0116

San Diego, CA (619) 205-2026

Coachella, CA (760) 578-1043

Sacramento, CA (916) 997-7492

Bullhead City, AZ (928) 715-0672

Riverside, CA (951) 276-9025

Stockton, CA (510) 516-5567

Phoenix, AZ (602) 276-2040

Las Vegas, NV (702) 877-4302

Salt Lake City, UT (801) 796-7368

Boise, ID (208) 459-3800

Williston, ND (701) 572-8126

Page 18 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

//DUJH ,QYHQWRU\ RI 3RSXODU DQG DUJH ,QYHQWRU\ RI 3RSXODU DQG 1RW 6R 3RSXODU &RROLQJ 3URGXFWV 1RW 6R 3RSXODU &RROLQJ 3URGXFWV /& t KEΖd , s /d͕ t t/>> D < /d͊ & t KEΖd , s /d͕ t t/>> D < /d͊

x Z / dKZ^ x K/> KK> Z^ $WODQWD &LQFLQQDWL 'DOODV %DOWLPRUH '& +RXVWRQ &KDUORWWH /RV $QJHOHV &KLFDJR

3KLODGHOSKLD 3KRHQL[ 7DPSD 7ROHGR

x , Z' /Z KK> Z^

www.Act tiveRadiator.com

$1,5000 down no payments. no interrest. for 6 months.

= ØÂ ÁÈØ ÈÂ¼¯Â ãʌ ©Èʒd d çÂ Ø Ø ¹ʒ ÈÁʘʘ ©ɷɶɸɷ

THU UNDE ER CREEK Mobilee fUEL & SER ERVICE EQUIPMENT

¼¼ çÜ ãʌ ɾɼɼʒɻɹɻʒɽɼɼɽ

Üö (¯Â Â ¯Â©ʌ ˚ɷʍɻɶɶ ÈôÂ Õ öÁ Âã Ü ÈÂ ÈçØ ¸È Ü¯ã Ø ööʍʍ ɼɿɶʣ© ¼¼ÈÂ Bç¼ã¯ʣdd Â¹ ddØØ ¯¼ Ø Â Õ ã Âã ɷɶɶʣ© ¼¼ÈÂʍ ɸʣ¯Âʣɷ ( ÜöÜã Áʒ ]ç ¸ ã ãÈ ÕÕØÈó ¼ʒ Offer valid until Dec. 31, 20211.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 19

WFH = WO WORK K FO OR HOU URS

Adaptable articulated dumpers by AUSA. Form meets function with exceptional durability and operator safety. Explore the full range of AUSA products at diamon m daequipment.com.

7 locations in Southern California & Southern Nevada

Page 20 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby-Smith Machinery Adds to Growing Network With Olmeda as Remarketing, Equip. Manager

Jesse Olmeda

Kirby-Smith Machinery Inc. (KSM) continues to add to its growing used equipment department with the hiring of Jesse Olmeda as remarketing and used equipment manager. Olmeda will be located in Oklahoma City and report to Director of Remarketing and Used Equipment David Mehrtens. Olmeda will help manage remarketing programs and used equipment operations for the heavy equipment distributor and focus on overall growth and new opportunities for the used side of the business, including the development of an auction program. Mehrtens has bought and sold equipment with Olmeda for decades and knows he will be a huge asset to the company’s operations. “Jesse brings a wealth of knowledge to this position,” Mehrtens said. “When you include the time spent with his father’s business, you could make a real argument that Jesse has been doing this since he was five years old. There is no doubt he knows both his iron and how to work with people. Jesse is going to do great things for Kirby-Smith Machinery, and I’m excited he is on our team.”

Olmeda, who officially started his equipment sales career at 18, has been selling machinery at both the dealer and independent level for the better part of three decades. He is ready for the challenges and excitement of his new position. “We have a lot of opportunity ahead of us,” Olmeda said. “I’m grateful to David for trusting me to be a part of it and look forward to helping the business grow as we expand our offerings and programs. It’s great to be a part of the Kirby-Smith Machinery family.” About Kirby-Smith Machinery Inc. Kirby-Smith Machinery Inc. was established in 1983 and is a new and used heavy construction equipment and crane dealer. Kirby-Smith Machinery has 12 branch locations in Oklahoma, Texas, Kansas and Missouri, as well as a dedicated Energy Services Division. For more information about Kirby-Smith Machinery, call 888/861-0219 or visit kirbysmith.com. 

Bobcat of Marble Falls Celebrates Its Grand Opening Compact Construction Equipment LLC, the authorized Bobcat equipment dealer in south, central and west Texas, celebrated the grand opening of its newest branch location in Marble Falls, Texas, on Oct. 29. The facility, located on the north side of Marble Falls, opened for business in June Attendees to the grand opening were invited to tour the facility, check out the newest Bobcat equipment and enjoy a catered lunch. Factory representatives from Bobcat Company, Virnig Manufacturing, Fecon, as well as team members from Bobcat of Marble Falls, were on hand to answer customer questions and demonstrate its products. The Marble Falls Chamber of Commerce’s team of ambassadors also were present to host the official ribbon-cutting ceremony. Located on Highway 281 at 3413 N U.S. Highway 281, the facility is located on approximately 1.87 acres. The building occupies more than 13,000 sq. ft. and includes a large shop for service, an indoor equipment showroom, expansive parts warehouse and dedicated area for new and used equipment plus rental inventory. “We are really excited to be in Marble Falls,” said Chief Executive Officer Whit Perryman. “This new branch will allow us to better serve our customers west of Austin. With the unprecedented growth the area is experiencing, our Marble Falls location will make it quicker and easier for customers to get the Bobcat equipment, parts and service they need.” 

Located on Highway 281 at 3413 N U.S. Highway 281, the facility is located on approximately 1.87 acres.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 21

www.cpower.com 9200 Liberty Drive Liberty, MO 64068 816-781-8070 Wichita, KS 316-943-1231 Great Bend, KS 620-792-1361 Liberal, KS 620-624-7274 Woodward, OK 580-256-6014 Salina, KS 785-825-8291 Colby, KS 785-462-8211

Springfield, MO 417-865-0505 Joplin, MO 417-726-5373 Riverside, MO 816-415-6787 Wichita, KS 316-789-7370 Yukon, OK 405-324-2330 Maryland Heights, MO 314-427-4911 Liberty, MO 806-415-6700 Tulsa, OK 918-984-6565

Glenn B. Dorning www.gbdorning.com 1744 E. Holt Blvd. Ontario, CA 91761 909-983-2089

Page 22 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WORK YOUR CONNECTIONS.

With John Deere Connected Support™ , your machines are constantly under the watchful eye of both John Deere and your local dealership. Together they can reduce, or even prevent, costly downtime. All of which keeps you up and running, so you can stay connected to your operation and the work you need to do.

JohnDeere.com/Connected

4RIVERS EQUIPMENT

YELLOWHOUSE MACHINERY

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.4riversequipment.com

www.yhmc.com

www.honnen.com

www.doggett.com

Colorado Springs, CO 719.475.1100

Broken Bow, OK 580-584-3222

Amarillo, TX 806-335-1681

Frederick, CO 303.833.5900

Enid, OK 580-233-5000

Dalhart, TX 806-884-4994

Albuquerque, NM 505.884.2900

Tulsa, OK 918-245-5926

Lubbock, TX 806-748-4700

Farmington, NM 505.326.1101

McAlester, OK 918-423-2555

Abilene, TX 325-677-2291

Hobbs, NM 575.392.6923

Midland/Odessa, TX 432-580-3337

El Paso, TX 915.598.1133

San Angelo, TX 325-651-3337

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441

St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001

Victoria, TX 361-570-6666

Lufkin, TX 936-634-8801

Alexandria, LA 318-442-0455

Monroe, LA 318-343-8787

Baton Rouge, LA 225-291-3750

Shreveport, LA 318-631-3090

Broussard, LA 337-837-9481

St. Rose, LA 504-466-5577

Covington, LA 985-893-3005

Tyler, TX 903-592-8900

Longview, TX 903-758-3326

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 23

NED - Texas

Porter Group USA

Orion Equipment

Formerly Four Seasons Equipment

13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.portergroupusa.com

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Houston, TX 800-234-5007 • 281-807-9777 Dallas, TX 866-270-1700 • 214-388-1700 www.nedealers.com

Page 24 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Foundation Construction Industry Vet Retires After 49 years in the foundation construction industry, Mike Elliott has announced his decision to retire. Elliott started his construction career with Mississippi Valley Equipment in 1972. In 1987, he team up with partners Mark Rutland and Dick Nelson to buy out MVE’s Florida operations and established Pile Equipment Inc. When Nelson passed away in 1997, Elliott was named president of PEI. Elliotts’s skills, knowledge and reputation in the foundation industry grew over the years, and the company flourished. When Elliott and Rutland began looking for a succession plan for their business in 2014, ECA stepped in, and the companies merged in 2015. Elliott was immediately named vice president of ECA and branch manager of ECA Jacksonville. “Mike has been a big factor in our expansion into the southeast, as well as a valued leader and mentor to many,” said Roy Kern Jr., ECA president/CEO. Elliott’s retirement is effective Dec. 31, 2021, however he will remain on as a consultant. 

Mike Elliott

CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121

NED - TEXAS (Formerly Four Seasons Equipment) www.NEDealers.com Houston, TX • 800-234-5007 Dallas TX • 866-270-1700

NUECES POWER EQUIPMENT www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-289-0066 Laredo, TX • 956-725-0066 San Antonio, TX • 210-310-0066 San Benito, TX • 956-361-0066 Victoria, TX • 361-576-0066 El Paso, TX • 915-541-0066

PORTER GROUP USA

Hyundai Construction Equipment Americas Welcomes Stan Park as New President Hyundai Construction Equipment Americas Inc. announced the appointment of Stan Park as president of the company. A 27-year veteran of Hyundai, Park previously held various field and executivelevel leadership roles, most recently as the vice president of marketing and dealer development. “Stan is a pillar of HCEA in North America and is well known throughout the organization domestically and abroad,” said Mike Ross, vice president of sales. Ross said Park’s experience and leadership abilities will be essential in driving the success of Hyundai’s brand in North America going forward. “For more than 20 years, I’ve been fortunate enough to grow with Hyundai. Today, I’m excited to have the opportunity to lead the company to the next level,” Park said. For more information, visit www.hceamericas.com. 

www.portergroupusa.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368

MECOM EQUIPMENT www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135

JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181

R & S INDUSTRIES, INC. www.rsindinc.com 951 CR G, Clovis, NM 88101 575-769-8659

Stan Park

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 25

Get an “A” with Hyundai Hyundai Construction Equipment is excited to announce the launching of our new A-series machines. Along with a new look, these machines are packed full of standard new features and benefits to get the job done efficiently. • Cummins Performance Series Engines Stage V emissions compliant engines • EPFC (Electric Positive Flow Control) Reduces daily fuel consumption by 8-11% • EPIC (Electric Pump Independent Control) Improved controllability with reduced RPM drop • Serviceability/Safety Enhanced cab visibility Easy access engine panels

More standard features. More value.

www.hceamericas.com To learn more about the what the new Hyundai A-Series machines can offer your business, contact your Hyundai dealer today.

Page 26 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

ARNOLD MACHINERY CO. www.arnoldmachinery.com

Salt Lake City, UT

Sparks, NV

801-972-4000

775-356-1511

Idaho Falls, ID

Las Vegas, NV

208-523-0822

702-642-9000

Meridian, ID

Phoenix, AZ

208-887-6000

602-414-1900

Twin Falls, ID

Tucson, AZ

208-733-1715

520-294-7677

ASCO EQUIPMENT www.ascoeq.com

Abilene, TX 325-698-2726

Amarillo, TX 806-372-8386

Lubbock, TX 806-745-2000

Perryton, TX 806-435-7773

Clovis, NM 575-742-2726

ARTBA Names Its National Contractor Safety Award Winners Transportation construction companies from three states were recognized for their outstanding employee safety programs during the American Road & Transportation Builders Association’s (ARTBA) Annual Convention, held in Pinehurst, N.C. The annual ARTBA “Contractor Safety Awards” were created to promote worker safety and health as core values of the transportation design and construction industry. The contractor finalists were competitively selected, based upon their accident and injury rates on work sites as reported to the Occupational Safety and Health Administration (OSHA), their Experience Modification Rates (EMRs) as determined by their insurance carriers and their safety programs. Winners were selected based on demonstration of key principles of safety excellence. The awards were presented as follows: • Under 500,000 personnel hours: W-L Construction & Paving Inc., Chilhowie, Va. • 500,001 – 1 million: Barriere Construction Co., Metairie, La. • Over 1 million personnel hours: Aldridge Electric Inc. Libertyville, Ill. For more information, visit www.artba.org. 

SIERRA MACHINERY, INC. www.sierraelpaso.com

El Paso, TX 915-772-0613

Artesia, NM 575-746-6592

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 27

Contact your local dealer:

ROMCO EQUIPMENT CO. www.romco.com

Austin Round Rock, TX

Ft. Worth Ft. Worth, TX

512-388-2529 877-851-1026

817-626-2288 866-966-4602

Buffalo Buffalo, TX

Houston Houston, TX

903-322-5602

713-937-3005 800-865-6998

Carmine Carmine, TX 979-278-3570

Corpus Christi Corpus Christi, TX 361-881-4891 Local Dealer

Longview Longview, TX 903-758-5576

Rio Grande Valley Mercedes, TX 956-565-0100

Dallas Local dealer address Carrollton, TX San Antonio 000.000.0000San Antonio, TX 214-819-4100 800-227-6626 210-648-4600 www.localdealerweb.xx 800-966-4601

Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx PACWEST MACHINERY www.PacWestMachinery.com

Local Dealer address 000.000.0000 Portland, OR 503-252-5933 www.localdealerweb.xx Spokane Valley, WA

Local dealer 509-534-5933

Eugene, OR 541-302-3762

Local Dealer

Kent, WA dealer address Local 206-762-5933

GET IT DONE EFFICIENNTLYY WITH

Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com Local Dealer Bakersfield, CA Local dealer address 661-387-6090 000.000.0000 Corona, CA 951-277-7620 www.localdealerweb.xx

THE PERFE P CT C PAIR A R.

000.000.0000 www.localdealerweb.xx

Fresno, CA 559-834-4420

Sacramento, CA

Th The h new Volvo olv l EC950F crawler l excavator t and d ttried-and-true i d dt A60H articulated ti l t d hauler h l were

916-504-2300

made for each other — and your profits. Together, they decrease loading passes to speed up cycle

Lakeside, CA

times — and they’re both protected by the industry’s best Lifetime Frame and Structure Warranty.

DEALER San Leandro, CA LOGO 619-441-3690 510-357-9131

Turlock, CA 209-410-6710

Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx Authorized dealer for Volvo Construction Equipment

You can move more material faster while lowering your costs. Contact your local [Dealer Name] location to learn how.

Page 28 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bobcat, National Disaster Search Dog Foundation Work to Strengthen Response

ROMCO Equipment www.romco.com 1519 W. Belt Line Road Dallas (Carrollton), TX 75006 214-819-4100 Austin, TX 512-388-2529 Buffalo, TX 903-322-5602 Carmine, TX 979-278-3570 Corpus Christi, TX 361-881-4891 Ft. Worth, TX 817-626-2288 Longview, TX 903-758-5576 Mercedes, TX 956-565-0100 San Antonio, TX 210-648-4600

Facilities Manager Jim Wiggins and one of the canine participants take a break with a Bobcat CTL and excavator.

Bobcat announced a new partnership with the National Disaster Search Dog Foundation (SDF), a nonprofit organization committed to strengthening disaster response in America by training highly skilled canine and handler search teams. The partnership spotlights SDF’s National Training Center in Santa Paula, Calif., where shelter dogs are trained to become rescue dogs through simulated rubble piles and mock disaster sites. Founded in 1996, SDF has trained 180 certified first responder and canine teams that have deployed to 216 disasters and missing person searches. Through this partnership, Bobcat equipment is used to create and maintain realistic onsite training environments at the 125-acre National Training Center, which is designed to simulate conditions in various types of natural and manmade disasters. “We are excited to partner with the Search Dog Foundation and help support their mission to provide search and rescue training for dogs and their handlers,” said Laura Ness Owens, vice president of marketing, communication and public affairs at Doosan Bobcat North America. “The Search Dog Foundation empowers lifesaving work that truly matters to all of us. Bobcat is honored to support these heroic first responders, who act with courage, determination and toughness.” At SDF’s National Training Center, dogs must learn to crawl through tunnels, maneuver on ladders, navigate unstable surfaces and detect human

Over the past 25 years, SDF and its dogs and handlers have worked to save lives in hundreds of disasters, such as Hurricanes Katrina, Harvey and Irma, the Oklahoma City bombing, California mudslides, the World Trade Center attacks and earthquakes in Nepal, Haiti and Japan. For more information, visit Bobcat.com.

At SDF’s National Training Center, dogs must learn to crawl through tunnels, maneuver on ladders, navigate unstable surfaces and detect human scent beneath debris.

scent beneath debris. A Bobcat T750 compact track loader, Bobcat E35 excavator and a variety of Bobcat attachments are used for brush clearing, trenching, road maintenance, moving rubble to create new training courses and learning opportunities, and to modify existing courses for the dogs and their handlers. “This important partnership with Bobcat enables us to train the next generation of search teams by constructing realistic environments and more challenging training scenarios at our campus,” said SDF’s Senior Director of Communications and Handler Operations Denise Sanders. “Bobcat’s support is helping our teams reach the highest skill levels needed for certification and maintain deployment readiness.”

About National Disaster Search Dog Foundation Founded in 1996, Search Dog Foundation (SDF) is a nonprofit, nongovernmental organization based in Santa Paula, Calif. Its mission is to strengthen disaster response in America by rescuing and recruiting dogs and partnering them with first responders to find people buried alive in the wreckage of disasters. SDF pledges to support each of these teams through training and medical coverage for the entire life of each canine, all provided at no cost to their task forces and departments. The organization was founded by Wilma Melville, a retired schoolteacher who was deployed to the Oklahoma City bombing in 1995 with her FEMA-certified search dog, Murphy. Returning from the deployment, she was determined to do something about America’s severe shortage of canine disaster search teams and created SDF to address this problem. Since then, SDF has recruited hundreds of rescued dogs, and trained 180 certified search teams that have deployed to more than 200 disasters and missing person searches. 

Stephenville, TX 817-626-2288

Volvo Construction Equipment & Services www.vcesvolvo.com Bakersfield Bakersfield, CA 661-387-6090 Corona Corona, CA 951-277-7620 Fresno Fresno, CA 559-834-4420 Sacramento Sacramento, CA 916-504-2300 San Diego Lakeside, CA 619-441-3690 San Leandro San Leandro, CA 510-357-9131 Turlock Turlock, CA 209-410-6710

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 29

MORE MAX FOR THE WAY YOU WORK.

With our MAX-Series machines, we stripped down and reimagined every single detail. From premium 360-degree visibility to our roomiest design yet, these compact track loaders and skid steers are designed with creature comforts that let you work more comfortably MVY SVUNLY WLYPVKZ VM [PTL 7S\Z L]LY` 4(? :LYPLZ THJOPUL PZ I\PS[ [V SLHK [OL PUK\Z[Y` PU O`KYH\SPJ WLYMVYTHUJL [YHJ[P]L LɈ VY[ undercarriage technology, reliability and serviceability, meaning you’ll be able to accomplish more than you ever thought possible. EXPLORE THE FULL MAX-SERIES LINEUP AT ASVi.COM

DISCOVER THE MAX-SERIES LINE-UP AT CLM Equipment Co. Inc.

FMI Equipment

Jet City Equipment

www.clmequipment.com

www.fmiequipment.com

www.jetcityequipment.com

3135 US Hwy 90 East Broussard, LA 70518 337-837-6693

11111 E Trent Avenue Spokane, WA 99206 509-927-4071

33345 SR20 Oak Harbor, WA 98277 360-675-4441

4851 E Napoleon Road Sulphur, LA 70663 337-625-5942

1947 Saint Street Richland, WA 99354 509-505-5997

10219 State Avenue Marysville, WA 98271 360-651-9079

2815 N Sam Houston Pkwy E Houston, TX 77032 281-598-2500

2713 Euclid Avenue Wenatchee, WA 98801 509-888-8181

Page 30 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

N.M. Officials Approve $100M Nuclear Waste Construction

Estimated to cost about $100 million, the shaft will be a key part of the repository's revamped ventilation system.

CARLSBAD, N.M. (AP) State environmental regulators have cleared the way for work to continue on a multimillion-dollar ventilation shaft at the federal government's underground nuclear waste repository in southern New Mexico. Ventilation has been an issue since 2014, when a radiation release contaminated parts of the Waste Isolation Pilot Plant and forced an expensive, nearly three-year closure, delayed the federal government's cleanup program and prompted policy changes at national laboratories and defense-related sites across the U.S. The state Environment Department last week approved a permit modification requested by the U.S. Department of Energy to build and use the utility shaft. Temporary authorization previously was granted but work stopped in November 2020 after state officials opted not to renew the authorization, citing a rise in COVID-19 infections among workers at the repository. Estimated to cost about $100 million, the shaft will be a key part of the repository's revamped ventilation system. With more airflow, officials have said more employees can be in the underground space working on mining and waste operations simultaneously. The project is expected to be completed in 2025 and would triple the available air flow, the Carlsbad Current-Argus reported. In the notice of approval, New Mexico Environment Secretary James Kenney said more airflow was needed for the repository to achieve its mission. Donavan Mager, a spokesman for Nuclear Waste Partnership _ the contractor that manages the facility _ said it was unclear when construction would resume.

Subcontractor Harrison Western-Shaft Sinkers was awarded a $75 million contract to build the shaft in 2019. When complete, it will reach a depth of about 2,275 feet (693 meters) and will include two access drifts to connect the shaft with the rest of the WIPP underground. The project saw intense criticism from environmental and government watchdog groups that argued it was part of a larger plan to expand the repository beyond its presently permitted mission, which allows for disposal of 6.2 million cubic feet of waste. Officials have said it would take congressional action to increase the volume of waste permitted at WIPP. The DOE is seeking a separate permit change to allow the mining and use of two additional disposal rooms to replace space that was lost to due contamination in 2014. Still, in public comments submitted to state, opponents voiced concerns that the project could lead to further expansions of the facility. ``We object to NMED's refusal to explain the true purpose of the shaft in their required notification documents for the public,'' wrote Virginia Necochea, executive director at the New Mexico Environmental Law Center. ``In order to provide informed public comments, the public must be able to review DOE's entire plan.'' The project was supported by members of the Carlsbad City Council, the Carlsbad Chamber of Commerce and local business owners. They defended WIPP, a major employer in the community, and argued that the shaft was needed to improve worker safety. 

Paving

SECTION

Pages 31-43

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Volvo CE Unveils CX01 Single-Drum Asphalt Compactor Concept at Utility Expo Designed for autonomous operation and multiunit communication, the CX01 concept is already influencing future Volvo CE machine design.

As a part of its continuous pursuit of ground-breaking machine innovation, Volvo Construction Equipment unveiled its CX01 single-drum asphalt compactor concept at The Utility Expo in Louisville, Ky. The CX01 concept utilizes one vibratory asphalt compactor drum that’s actually two independent halves (called a split-drum) kept upright by a self-balancing control system. Capable of being operated either by remote-control or entirely autonomously, the machine also is fitted with both a diesel engine and an energy storage system, making it a flexible electric hybrid solution. It can be operated in diesel-only, hybrid or fully electric modes. Proving Volvo CE’s capacity for innovation across a variety of segments, this concept machine is the latest in the Concept Lab family of prototype machines that push the boundaries of conventional construction equipment.

“While the CX01 is a conceptual product, the research and development that have gone into it will benefit customers in other ways,” said Justin Zupanc, head of the asphalt compaction development team, Volvo CE. “It’s exciting for our engineers to push themselves to develop new and innovative ideas, and we’ve had personnel from the U.S. and Europe involved in the design, build and test phases of this concept.” Customer-Centered Design The CX01 concept provides an opportunity to fundamentally rethink the paving process to address customer needs, both improving the conditions for the operator and increasing productivity. By redesigning the compactors themselves, the operator is removed from the unit — reducing exposure to vibration, noise, dust and other associated environmental conditions — and

freed up to autonomously control a fleet of CX units working together to compact asphalt surfaces. A fleet of these units deployed on larger jobs could work together and communicate not only between each CX unit but also to other pieces of equipment on the site. The machines could survey the job site, report on the conditions of the mat — things like density, temperature and passes — and determine when and where to compact. Compaction cycles can be streamlined, costs reduced and more agile work patterns set up, due to the machine’s compact design and precise maneuverability. Rolling pattern, weight and number of rollers can all easily be adjusted to match the width, thickness and speed of paving operation — providing a complete paving solution for whatever the job might be, from light infrastructure to highway construction.

The CX01 can be matched with Volvo’s existing co-pilot system so that all work can be handled remotely via a touchscreen interface. In addition, it uses GPS position tracking to monitor job performance and help customers better hit their productivity targets. While the CX01 concept has been purely an exploration, some learnings could be applied to future products. “Remote control and autonomous operations are areas of focus for us in R&D. Also, while the low-friction water reduction coating on the drum shell is theoretical, it could be a huge benefit on larger machines to decrease the amount of water needed,” Zupanc said. “It is exciting to think how the theories showcased on the CX01 could be realized on compaction production units in the future.” For more information, visit www.volvoce.com. 

Page 32 • November 21, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Products shown with optional equipment.

MAULDIN Paving g Products... MASTERS S OF THE MA AT! T! Contact your MAULDIN N dealership today to see the newly redesigned 1860 Commercial Paver For more information visit us at www.4aMauldin.com.

Golden Equipment Company www.goldenequipment.com 721 Candelaria Rd NE 29268 Hwy 160 Albuquerque, NM 87107 Durango, CO 81303 (505) 345-7811 (970) 247-8830

1150 Madison Lane Farmington, NM 87401 (505) 326-1413

Closner Equipment www.closner.com 6532 East Highway 114 13800 FM 973 N Rhome, TX 76078 Manor, TX 78653 (817) 708-9108 (512) 272-8200

21910 FM 2252 Schertz, TX 78154 (210) 732-2131

Tri-State Truck & Equipment, Inc. 5250 Midland Rd. Billings, MT 59101 (406) 245-3188

www.tste.com 1271 N. Derrick Dr. Casper, WY 82604 (307) 472-1818

5024 Tri Hill Frontage Rd. Great Falls, MT 59404 (406) 452-9551 200 Floss Flats Rd. #1 Belgrade, MT 59714 (406) 388-5815

1319 Elk St. Rock Springs, WY 82901 (307) 362-4000

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 21, 2021 • Page 33

KIRBY-SMITH MACHINERY INC.

NUECES POWER EQUIPMENT

www.kirby-smith.com

www.nuecespower.com

6715 W. Reno Oklahoma City, OK 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700

Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600 Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826

Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Waco, TX 254-261-1370

Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066

Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066

HONNEN EQUIPMENT CO. www.honnen.com Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090

Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441 Ogden, UT 801-627-0049 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

Page 34 • November 21, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

GSSI PaveScan RDM 2.0 Tool Gives Density Measurements

PaveScan 2.0 incorporates a new sensor design built specifically for the extremes of the asphalt paving environment, foldable deployment arms with high-visibility for work site safety and has a warm-up time of under one minute when ambient temperature is over 70 F.

GSSI, a leading manufacturer of ground penetrating radar (GPR) equipment, announced PaveScan RDM 2.0 — an asphalt density assessment tool that provides accurate real-time measurements to ensure pavement life and quality. GSSI unveiled PaveScan RDM 2.0 for the United States and Canada at the Transportation Research Board 2020 Conference in January. PaveScan 2.0 incorporates a new sensor design built specifically for the extremes of the asphalt paving environment, foldable deployment arms with high-visibility for work site safety and has a warm-up time of under one minute when ambient temperature is over 70 F. PaveScan RDM is ideal for uncovering problems that occur during the paving process, including poor uniformity and significant variations in density. By avoiding these problems, PaveScan RDM helps avoid such premature failures as road raveling, cracking and deterioration along joints, according to the manufacturer.

This system automatically measures the dielectric value to identify anomalies in realtime. In addition, the dielectric values can be used to as a means to correlate percent voids and density in new pavement. The innovative technology enables users to obtain critical density data for QA/QC of new pavements. Unlike other options, like nuclear density gauges or radioactive alternatives, PaveScan does not result in any site hazards or require closing off work areas. Seamlessly integrating with GPS systems, PaveScan features a flexible, modular design that facilitates easy and efficient operation and data collection. It is offered as a single sensor or a three-sensor cart based configuration. As of April 2019, this pavement density measurement technology is an accepted American Association of State and Highway Transportation Officials (AASHTO) specification, PP 98-19. For more information, visit www.geophysical.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 21, 2021 • Page 35

BUILT TO CONNECT

Efficiency and Productivity Designed with safety and operator comfort in mind, the Shuttle Buggy® 3000 material transfer vehicle features adaptive cruise control, bright LED lighting, four-wheel steering for easy transport and ground-level maintenance access for added convenience. Operators can rely on clear sightlines and the ground operator is safely protected inside the structure of the machine. The Roadtec SB-3000 is the perfect blend of traditional craftsmanship and modern technology.

astecindustries.com ARIZONA/NEVADA/UTAH

CALIFORNIA

OKLAHOMA

OREGON/WASHINGTON/ MONTANA/IDAHO

TEXAS

Goodfellow Corporation www.goodfellowcorp.com (801) 796-6126

Herrmann Equipment www.herrmannequipment.com N CA (916) 783-9333 S CA (909) 877-5597

Van Keppel www.vankeppel.com (844) 499-6363

Modern Machinery www.modernmachinery.com (800) 332-1617

Closner Equipment www.closner.com (210) 732-2131

WYOMING/COLORADO

Power Motive www.powermotivecorp.com (303) 355-5900

Page 36 • November 21, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The work may be under your feet, but you’re looking ahead - to the next challenge and the next deadline. Your local Cat Dealer RœHUV VDOHV VHUYLFH DQG VXSSRUW IRU WKH IXOO :HLOHU FRPPHUFLDO SDYLQJ OLQH LQFOXGLQJ SDYHUV WDFN GLVWULEXWRUV DQG FRPSDFWRUV

Built to Exceed the Demands of the Commercial Paving Contractor

WE’RE RIGHT THERE WITH YOU Cashman Equipment

Holt of California

Quinn CAT

N C Machinery

Tractor & Equipment

cashmanequipment.com

holtca.com

quinncompany.com

ncmachinery.com

tractorandequipment.com

Serving Nevada & the Eastern Sierras 888-CASHMAN (888-227-4626) Henderson/Las Vegas, NV Elko, NV Reno/Sparks, NV Round Mountain, NV Winnemucca, NV

7310 Pacific Avenue Pleasant Grove, CA 95668 916-921-8800 1521 West Charter Way Stockton, CA 95206 209-466-6000 3440 East Pacheco Blvd. Los Banos, CA 93635 209-826-4919

Bakersfield, CA 661-393-5800 Foothill Ranch, CA 949-768-1777 Fresno, CA 559-896-4040 Los Angeles, CA 562-463-4000 Riverside, CA 951-686-4560

Tukwila, WA 425-251-5800 Chehalis, WA 360-748-8845 Fife, WA 253-896-0878 Monroe, WA 360-805-6000 Mount Vernon, WA 360-424-4292 Port Angeles, WA 360-452-9222

East Wenatchee, WA 509-886-5561 Yakima, WA 509-248-2371 Anchorage, AK 907-786-7500 Fairbanks, AK 907-452-7251 Juneau, AK 907-789-0181 Wasilla, AK 907-352-3400

Billings, MT 406-656-0202 Bozeman, MT 406-585-5800 Great Falls, MT 406-761-7900 Helena, MT 406-442-2990 Williston, ND 701-713-2100 Worland, WY 307-347-4747

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 21, 2021 • Page 37

ARNOLD MACHINERY COMPANY www.arnoldmachinery.com Las Vegas, NV 702/642-9000 Phoenix, AZ 602/414-1900 Tucson, AZ 520/294-7677

ASCO EQUIPMENT www.ascoeq.com Beaumont, TX 409/212-8100 Brenham, TX 979/836.6641 (North) Houston, TX 281/987.1990 (South) Houston, TX 713/649.0940

BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511 866/796-3211

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 McAlester, OK 918/310-1550 Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729

ROMCO EQUIPMENT CO. www.romco.com Austin, TX 512/388-2529 877/851-1026 Buffalo, TX 903/322-5602 Dallas (Carrollton), TX 214/819-4100 800/227-6626 Ft. Worth, TX 817/626-2288 866/966-4602

Longview, TX 903/758-5576 Midland, TX 432/234-9409 San Antonio, TX 210/648-4600 800/966-4601

Page 38 • November 21, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 21, 2021 • Page 39

s®Ý®ã ÊÄ Ê¥ ÊçÙ s® ½ ÙÝ ããÊ Ê ù͊

MF25 500CS Feed der APCO EQUIPMENT ENT www.apcoequipment.com nt.com 3432 N 5th Street eet N. Las Vegas, NV 89032 (800) 574-40899

5HGHÀQLQJ WKH WRWDO FRVW RI RZQHUVKLS Challenging the Status Quo — NOW with IMIX two stage mixi

BANE MACHINER RY Y, INC. Y, ZZZ EDQHPDFKLQHU\ U\ FRP 2449 Manana Rd. 'DOODV 7; (214) 352-24688 )W :RUW UWK 7; ; (817) 847-58944 7\OHU 7; 7\ (903) 597-66411

CLAIREMONT EQUIPMENT PMENT ZZZ FODLUHPRQWHTXLSP PHQW FRP 7651 Ronson Road ad San Diego, CA 921111 (858) 278-8351 1330 W Mission Road oad Escondido, CA 92029 029 (760) 739-9100 440 West Aten Road oad ,PSHULDO &$ (760) 355-7700 4726 Convoy Street eet San Diego, CA 921111 (858) 278-8338

&ORVQHU (TXLSPHHQW ZZZ FORVQHU FRP BEE EQUIPMENT SALES ALES LTD. L ZZZ EHHHTXLSPHQWVVDOHV FRP 2506 Slaton Highway way /XEERFN 7; (806) 745-1511

6532 East Highway 114 1 Rhome, TX 76078 78 (817) 708-9108 21910 FM 2252 Schertz, TX 78154 54 (210) 732-2131 13800 FM 973 N Manor, TX 786533 (512) 272-8200

C. L. BOYD CO., INC. ZZZ FOER\G FR RP 4220 West Reno Ave. A 2NODKRPD &LW\ 2. (800) OKC-BOYD • (405)) 942-8000 Ardmore, OK K (866) 720-2693 • (580) 224-2693 Lawton, OK (800) 633-2693 • (580) /355-6667

/ŶƋƵŝƌĞ ĂďŽƵƚ ǇŶĂƉĂĐ͛Ɛ ^ƉĞĐŝĂů &&ŝŝŶĂŶĐŝŶŐ KīĞƌƐ͘

DOGGETT HEA AVY VY Y MACHINER RY Y SERVICES CES www.doggett.com m $OH[DQGULD /$ (318) 442-0455 Baton Rouge, LA (225) 291-3750 Broussard, LA (337) 837-9481 Covington, LA (985) 893-3005 /DNH &KDUOHV /$ (337) 430-3045 Monroe, LA (318) 343-8787 Shreveport, LA (318) 631-3090 St. Rose, LA (504) 466-5577 Beaumont, TX (409) 842-1754 Bryan, TX (979) 823-1905 Corpus Christi, TX X (361) 289-0727 Houston, TX (713) 679-6700 Longview, TX (903) 758-3326 Lufkin, TX (936) 634-8801 San Juan, TX (956) 787-0001 7\OHU 7; 7\ (903) 592-8900 Victoria, TX (361) 570-6666

MODERN MACHINER RY R Y www.modernmachinery..com &RUSRUDWH 2IÀ IÀFH 0LVVRXOD 0RQWDQD (409) 842-1754 Boise, Idaho (208) 336-8670 Jerome, Idaho (208) 324-4522 3RFDWHOOR ,GDKR (800) 829-4450 %LOOLQJV 0RQWDQD (800) 735-2589 &ROXPELD )DOOV 0RQWDQ QD (800) 434-4190 Eugene, Oregon (800) 826-9811 3RUW UWODQG 2UHJRQ (800) 950-7779 Kent, Washington (800) 669-2425 Rochester, Washington g n (800) 304-4421 Spokane, Washington n (800) 541-0754

ROAD MACHINER RY Y www.roadmachinery.com om

COOPER EQUIPMENT NT CO. www.cooperequip.com .com 5210 N Loop 16044 E San Antonio, TX 78247 8247 (210) 657-5151 201 Commerce Blvd. vd. Georgetown, TX 78626 8626 (512) 930-5151

Follow Dyynapac North America

ĞƐŝŐŶ ŶĞĚ ƚŽ ƉĞƌĨ ƌĨŽƌŵ ƌŵ͕ Ƶŝůƚ ƚŽ ůĂƐƚ

dyn napac.us | 800-65 51-0033

902 S. 7th Street Phoenix, AZ 85034 (480) 545-2400 Prescott, AZ (928) 778-5621 Tuscon, AZ (520) 623-8681 %DNHUVÀHOG &$ (661) 695-4830 Perris, CA (909) 355-3600 Pico Riviera, CA (562) 699-6767

Page 40 • November 21, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years New Marathon TPS500PT tack distributor, Honda gas eng, 18GPM pump, 500 gal, 5 ft spray wand w/50 ft hose, hose reel, 6 ft spray bar, operator’s platform, propane burners, flushing system, electric brakes - $23,800

New Marathon TPS250T tack distributor, Honda gas eng, 10GPM pump, 250 gal, 5 ft spray wand w/50 ft hose, propane heat, flushing system, electric brakes $12,200 (also avail w/spray bar)

LeeBoy Hands Out Hardware at Dealer Award Ceremony

eeBoy recently announced the winners of its 2020 Dealer Awards.

Top dollar volume dealers: • Ambrose Equipment • Stephenson Equipment • Reynolds-Warren • Nixon-Egli • Ascendum Machinery Top paver dealer — Ambrose Top tack tank dealer — Nixon-Egli

CEG

1989 Etnyre chip spreader, 12 ft spread hopper, Cummins 5.9L diesel engine, hydrostatic drive, 2WD $18,000

Nixon-Egli

2001 Omni IIIA screed, 10-18 ½ ft diesel heated screed, power crown & slope - $3800

Top broom dealer — Ascendum Machinery Top grader dealer — Ascendum Machinery Top max dealer — Closner Equipment Marketing — Stephenson Equipment Top product support dealer — Reynolds-Warren, Scottie Holcomb 

Ascendum Machinery

New Marathon KERA10 walk behind crack sealer, 10 gallons, full wrap around oil jacket, manual full sweep agitation, 80,000 BTU propane burner w/flame out protection, heated 1" discharge valve, 3” spring loaded squeegee - $6,500 (stock photo)

New Marathon TPS115S tack distributor, Honda gas eng, 10GPM pump, 115 gallons, 5 ft spray wand w/50ft hose, hose reel, 80,000 BTU propane burner, flushing system - $8795

2009 Etnyre Centennial II distributor, 2000 gallons, BT-1 computer, propane burners, 14 ft spray bar, 2009 Sterling L7500 w/Mercedes dsl eng, 6 spd trans, 2 spd axle - $87,000

2015 Laymor Sweepmaster SM400 broom, Kubota diesel engine, water system, 8 ft broom, cab w/heat & a/c, all new tires - $36,000

2012 Broce RJT350 broom, heat & a/c, John Deere 4.5L turbo dsl eng, 8’ broom, hydrostatic drive, water system, broom core 80%, all new tires - $31,000

3517 Wayne White Rd., Climax, NC 27233

Stephenson Equipment

Ambrose Equipment

Reynolds-Warren

Closner Equipment

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 21, 2021 • Page 41

BUILT TO CONNECT

A Workhorse To Depend On The Carlson CP100 II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100hp engine, an array of configurations and the class-leading EZCSS single slide screed, it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paver platforms.

astecindustries.com

www.goodfellowcorp.com www.cooperequip.com 5210 N Loop 1604 E San Antonio, TX 78247 (210) 657-5151 201 Commerce City Blvd. Georgetown, TX 78626 (512) 930-5151

390 North 200 West Lindon, UT 84042 (801) 796-6126 12451 Old U.S. 95 Boulder City, NV 89005 (702) 293-7504

www.modernmachinery.com Kent, WA (800) 669-2425

Billings, MT (800) 735-2589

Rochester, WA (800) 304-4421

Kalispell, MT (800) 434-4190

Spokane, WA (800) 541-0754 Boise, ID (800) 221-5211 Pocatello, ID (800) 829-4450

Missoula, MT (800) 332-1617 Eugene, OR (800) 826-9811 Portland, OR (800) 950-7779

www.herrmannequipment.com

www.closner.com

Northern California 9220 Viking Place Roseville, CA 95747 (916) 783-9333

6532 East Highway 114 Rhome, TX 76078 (817) 708-9108

Southern California 2711 Lilac Ave. Bloomington, CA 92316 (909) 877-5597

21910 FM 2252 Schertz, TX 78154 (210) 732-2131 13800 FM 973 N Manor, TX 78653 (512) 272-8200

Page 42 • November 21, 2021 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Contact your local dealer:

Arnold Machinery Company www.arnoldmachinery.com 2975 West 2100 South Salt Lake City, UT 801-972-4000 Idaho Falls, ID 208-523-0822 Meridian, ID 208-887-6000 Twin Falls, ID 208-733-1715 Elko, NV 801-972-4000 Sparks, NV 775-356-1511 Las Vegas, NV 702-642-9000 Phoenix, AZ 602-414-1900

Peerformmancee you o cann count on. oon

Tucson, AZ 520-294-7677

Local Dealer Local dealer address Pacwest Machinery 000.000.0000 www.pacwestmachinery.com www.localdealerweb.xx 8207 South 216th Street Kent, WA 98032 Local Dealer 800-935-5933

Local dealer address

4030 East Trent Avenue Spokane, 000.000.0000 WA 99202 800-938-5933 www.localdealerweb.xx 19255 NE Sandy Blvd Portland, OR 97230 Local Dealer 800-929-5933

Local 1550 Irving Roaddealer address Eugene, OR 97402 000.000.0000 866-920-5933

www.localdealerweb.xx

Local Dealer Local dealer address Sierra Machinery 000.000.0000 www.sierraelpaso.com www.localdealerweb.xx 939 Hawkins Blvd. El Paso, TX 79915 Local Dealer 915-772-0613

Local dealer address

7179 Roswell Hwy. 000.000.0000 Artesia, NM 88210 575-746-6592 www.localdealerweb.xx

Local Dealer Local dealer address 000.000.0000 Volvo Construction Equipment & Services www.localdealerweb.xx www.vcesvolvo.com Bakersfield, CA 661-387-6090 Corona, CA 951-277-7620 Fresno, CA 559-834-4420 Sacramento, CA 916-504-2300

DEALER LOGO

Lakeside, CA 619-441-3690 San Leandro, CA www.localdealerweb.xx 510-357-9131 Turlock, CA 209-410-6710

At Volvo, we e know that you need reliable, iable, durable dur and capablle paving equipment. pment. That’s why we wo ork to build sustainable, productive a and innovative machines that hat help you y get more done faster. The future is waiting – turrn to your nearest Volvo dealer to lea arn more.

Roads must be built. Worlds must be connected.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 21, 2021 • Page 43

DOUBLE DRUM OSCILLATION & HIGH FREQUENCY

DURABLE EASY TO USE

POWER MOTIVE CORP. www.powermotivecorp.com

5000 Vasquez Blvd. Denver, CO 80216 303/355-5900

Grand Junction, CO 970/241-1550

Colorado Springs, CO 719-576-5541

Milliken, CO 970/587-1188

Durango, CO 970/259-0455

Cheyenne, WY 307/634-5149

NED - Texas www.nedealers.com

Formerly Four Seasons Equipment Houston, TX 800-234-5007 281-807-9777 Dallas, TX 866-270-1700 214-388-1700

CISCO EQUIPMENT www.cisco-equipment.com

1706 S. 1st Street Artesia, NM 88210 800-748-1846

2707 Slaton Hwy Lubbock, TX 79404 877-745-9595

520 SE Loop 338 Odessa, TX 800-657-3673

620 N. Bell St. San Angelo, TX 76903 800-496-0271

WESTRAX MACHINERY www.westraxmachinery.net

19618 S. Susana Road Rancho Dominguez, CA 90221 800-411-4717 19885 Temescal Canyon Road Corona, CA 92881 800-411-4717 611 N. Golden Key Street Gilbert, AZ 85233 602-397-8173

www.sakaiamerica.com (800) 323-0535

Page 44 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Firms Tout Benefits of Utilizing e-Payment Platforms MONEY from page 1

“Subcontractors, suppliers and other sub-tier parties bear the brunt of the financial burden, with one in five regularly waiting beyond 60 days to collect payment,” reported Levelset. “The gap widens even further when it comes to collecting retainage, which 61 percent of all businesses say is ‘very important’ or ‘the most important factor’ for cash flow.” The report reveals that 56 percent of subcontractors wait more than 60 days to collect retained funds, compared to 16 percent of general contractors. Payment speed also correlates strongly to project type, according to the survey. Residential construction companies did better than those in both public and commercial construction, actually three times more likely to collect payment within 30 days. Housing contractors also were five times more likely than those on public projects. And though only one in five homebuilders are consistently paid on time, they outperform those on government projects and commercial jobs. “The pandemic drove financial uncertainty through the roof and put an extra kink in the flow of cash on projects across the country,” said Scott Wolfe Jr., Levelset CEO. “Payment delays throttle a company’s ability to be competitive, take on new projects and grow their business. We are seeing this happen across the industry, with companies further down the pay chain experiencing more of these pains.”

GCPay. “When we speak to general contractors and industry experts about paying via check, we hear the same thing: it’s just how it’s always been done,” said the Portland, Ore., company. “As proponents of construction technology and saving our customers valuable time and money, we believe the time has come where we can no longer ignore the benefits of electronic payment in our industry.” GCPay believes, first of all, electronic payment is more secure. Historically, the construction industry has believed that paper checks were the only means to guarantee the safe transfer of funds. But fraud risk for checks has actually risen, to 78 percent in 2017. “Financial technology has evolved to provide enhanced security for the electronic transfer of funds in nearly every industry. Construction is no different,” said the software company.

“You get a sense of how the slow flow of money depends on multiple check points and a review of work performed,” Kenderov said. “The slow movement of money has hurt the entire chain. And contractors are not getting paid because no cash is flowing.” The contractor, in turn, has to tell his supplier he hasn’t been paid so he can’t pay for materials for three or four weeks. “The supplier says ‘I have inventory, inflation is driving up the cost of materials. I’m not going to hold it for you,’” he added. “The contractor’s relationship with his vendors gets damaged as a result of doing half a job with everything being delayed.” Using a third-party payment system, Orem, Utah, real estate investment company Fox Financial streamlined cash flow issues and delays on closings. As in the past, “the payments to contractors can get delayed and we miss out on savings to get invoices paid early,” said Stuart Fox, CEO. “In the management of vendor payments, we use Plastiq to make sure we can always pay bills on time even if cash flow is slow from the project we are working on at the time.” His company has actually eliminated other options for payment management, preferring instead the simplicity and ease of use of a third-party process, said Fox. Electronic payment platforms like Plastiq allow clients to pay the GC with available credit on credit cards, and delay when they have to pay on the card from 45 to 100 days. “Money is flowing and everybody can pay,” said Kenderov. The concept does not involve new funds, so there’s no applying for a new line of credit. The contractor uses his or her existing credit card product. With a credit card number, the user determines whom he wants to pay and Plastiq sends money via check or wire transfer.

Relieving Headaches The survey found that just past the 40-day point, about a fifth of construction businesses find themselves between a cash-flow negative rock and a hard place: They’ve paid subcontractors, suppliers and other vendors but are still waiting for payment. “Forty-seven percent of companies say payment delays reduce their profit, and one in three turns to Beefing Up Bottom Line loans or other financing to bridge the cash flow gap, Preliminary notices and mechanics liens have become contractors’ favored methods of chasing payments for work they’ve performed. Third-party payment systems are designed to adding interest and other charges,” said Levelset. boost the electronic payment process. As Kenderov Contractors are turning to preliminary notices and Second, electronic payment processing makes the data explained, products such as Plastiq enhance the capabilities mechanics liens in chasing payments for work they’ve performed. The survey found that 51 percent of respondents trail more visible for everyone involved. All contract data, of these already-integrated software programs. “We expand options with ways to pay vendors the way send a preliminary notice on a typical project. That figure is change orders and compliance information is pre-loaded so all of it can be easily applied for payment. they want to be paid. We allow every one of these businesses up from just 29 percent last year. “If there are any disputes or discrepancies, the system will to accept card payments for free, so any one of your clients And, 71 percent of construction businesses filed a lien over non-payment in 2020. That marked a 22 percent notify the subcontractor that changes need to be made,” said to pay you with a credit card.” These payment services also can help mitigate the bottleincrease from the year before. The industry embraces the use GCPay. “All your contract data stays in sync as the electronic necks in materials procurement and logistics, he said. With of liens, according to the survey. In fact, about two in three payment is administered. The company maintains that integrating a payment soft- steel and lumber prices going up, the sooner the contractor businesses would support a subcontractor or supplier if they filed a lien, while 15 percent wouldn’t work with that vendor ware platform actually saves a contractor money in materials can acquire inventory the cheaper the future project. and stamps, yes, but also in time. And, lastly, electronic payThe problem is buyers don’t have access to cash when it’s again. tied up in other projects, said Kenderov. A third-party service Construction companies also are adopting technology in ments help to keep your supply chain running smoothly. That’s a selling point Stoyan Kenderov drives home in can put inventory on the contractor’s existing credit card and their quest to be paid. Today, 83 percent of construction businesses have the ability to accept electronic payments, reports explaining the benefits of a third-party business payment hold it somewhere for 60 and 100 days. Acquiring at present cost means the contractor can accelLevelset. Further, 79 percent of those say it’s helped them get platform such as Plastiq. Chief product and technology officer for the San Francisco company, he believes the biggest erate the purchase of inventory while paying as late as he paid faster. Companies using software for tracking and processing benefit contractors should be able to pay anybody in the would have by waiting. “He’s benefiting from the lower cost of inventory and getting a break on inflation this way,” he payments grew a whopping 113 percent year-over-year. world with a credit card. “In construction, every site is a mini universe,” he said. said. Software for payment paperwork is up 67 percent since With a product like Plastiq, “it’s important for commercial 2019, according to the survey. Just 8 percent of construction “The client, which could be a real estate company, is on the companies say they don’t use software at all. That’s a drop clock. The GC, who employs local contractors for roofing, contractors to realize they, too, can get paid by struggling piping, demolition or painting, is on the clock. They have to clients without having to shed a single cent of the payment,” from 21 percent in 2019. said Kenderov. “They don’t realize how important it’s Despite the integration of electronic payment platforms, turn that property around quickly.” The GC cannot pay the sub until work has been done or become to accept credit cards because nobody has cash.”  most construction accounting teams are still doing business CEG on paper, said payment automation software developer the client has paid the GC.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 45

www.powermotivecorp.com

POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900 Colorado Springs, CO • 719-576-5541 Durango, CO • 970-259-0455 Grand Junction, CO • 970-241-1550 Milliken, CO • 970-587-1188 Cheyenne, WY • 307-634-5149

www.roadmachinery.com

ROAD MACHINERY LLC Phoenix, AZ • 480-545-2400 Phoenix, AZ • 602-252-7121 Prescott, AZ • 928-778-5621 Tucson, AZ • 520-623-8681 Bakersfield, CA • 661-695-4830 Hayward, CA • 510-659-1903 Fresno, CA • 559-834-3149 Mojave, CA • 661-824-2319 Perris, CA • 909-355-3600 Pico Rivera, CA • 562-699-6767 Redding, CA • 530-229-3820 Sacramento, CA • 916-375-3540 Santa Rosa, CA • 707-544-4147

www.clairemontequipment.com

CLAIREMONT EQUIPMENT 7651 Ronson Road, San Diego, CA 92111 • 858-278-8351 1330 W Mission Road, Escondido, CA 92029 • 760-739-9100 8520 Cherry Avenue, Fontana, CA 92335 • 909-429-9100 440 West Aten Road, Imperial, CA 92251 • 760-355-7700 81-501 Industrial Place, Indio, CA 92201 • 760-863-5558 4726 Convoy Street, San Diego, CA 92111 • 858-278-8338

www.kirby-smith.com

KIRBY-SMITH MACHINERY INC. 6715 W Reno Avenue • Oklahoma City, OK 73137 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

“BUILDIN NG FOR THE FUTURE.” THREE G GENERATIONS. T “At Selge Constrruction, we’re a family business. ss. My son-in-law and even grandson andson are involved and interested in thiss great occupation. I’ve built a good name in our marketplacee with a reputation for quality work and integrity in the way we do business. And I choose Komatsu because se they match my values. Their excavatorss help my crews and family carry rry on our goals: to provide thee best job for an honest price. It’s these and maany other reasons why Komatssu works for us!”

Marv Selge (with with Noah & Justin) / Selge Construction, Construction, Inc. / Niles, MI

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com

12320 S. Main Street • Houston, TX 77035 • 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

That t’s s why y I am Komats t u tsu komaatsuamerica.com

Page 46 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Barber-Greene BG-260C Paver, 1:50 scale - $195

Hitachi 470 LCH-5 Excavator, 1:50 scale - $190

Roadtec RX-700 Cold Planner, 1:50 scale - $175

Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160

Allis Chalmers TS300 Cable operated Motor Scraper, 1:50 scale - $110

Caterpillar 12G Motor Grader, 1:50 scale - $80

Caterpillar 769C Quarry Truck, $80

Hyundai Robex 290LC-3 Excavator, 1:50 scale - $75

Komatsu PC650 Hydraulic Shovel, $75

Dynapac CA512 Vibratory Roller, 1:35 scale - $50

Dynapac F30 CR Paver, 1:35 scale - $50

Caterpillar 226B2 Skid Steer Loader, 1:32 scale - $50

Caterpillar 953 Track Loader, 1:50 scale - $130

Hitachi EH5000ac-3 Quarry Truck, 1:87 scale - $190

Bucyrus Erie 22-B Dragline, 1:50 scale - $290

JCB 217S Backhoe/Loader, 1:50 scale - $75

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 47

457 | WHEEL LOADER

www.ProConJCB.com 461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON 5050 East 58 Avenue Commerce City, CO 80022 1-844-JCB-IRON 2240 W. Buckeye Road Phoenix, AZ 85009 1-844-JCB-IRON

www.swjcb.com 2935 Lincoln Road Las Vegas, NV 89115 702-432-2200

Cisco Equipment www.cisco-equipment.com 620 N. Bell Street San Angelo, TX 76903 800-496-0271 2707 Slaton Hwy Lubbock, TX 79404 806-745-9595 1706 S 1st Street Artesia, NM 88210 575-748-1314

JCB wheel w loaders are fully loaded with innovate vate features.

520 SE Loop 338 Odessa, TX 79762 432-367-9181

JCB wheel el loaders deliver the power power, r,, to torque, orque, and payload capacity youu need for real-world d applications. With an engine that requires no DPF F,, and easy service accessibility with a sing gle piece hood, the JCB wheell loader range saves you time and nd money, moneyy,, making it single a must must-have have ave on any job-site. job site. more Learn mo ore about JCB wheel loaders at www.jcb.com www.jcb.com or contact yourr local dealer today. todayy..

YOUR FAMILY OF LOCAL L JCB DEALERS

/JCBNA

@JCBNA

JCBN JCBNA 4740

Page 48 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASV Holdings’ OEM Maintenance Kits Provide Convenient, All-In-One Solution ASV Holdings Inc., a manufacturer of all-purpose and all-season compact track loaders and skid steers, introduced maintenance kits for simple and convenient ASV machine parts purchasing and maintenance. The kits include replacement filters for service intervals. All parts included are OEM. “We want our customers to have the best performance from their machines,” said Buck Storlie, ASV product line manager. “These kits make it easy and convenient for them to achieve that through proper upkeep combined with OEM parts designed to keep the machine simplicity of having all of the required filters in one package speeds up performing long term while The regular maintenance tasks and allows operators to get to work sooner. avoiding costly repairs.” The ASV maintenance kits include hydraulic filter(s), an engine oil filter, fuel filter(s) allow operators to do more work in more places. “Whether you’re a contractor completing a job or a and air filters. The packaged kits remove the guesswork from the process of replacing filters by including all required com- landowner tending your property, you don’t want to waste ponents in one package. This simplicity speeds up regular time hunting down the proper filters for your machine. With maintenance tasks and allows operators to get to work soon- the kits, you have everything you need in one place. Just er. Additionally, the kits include labeling with instructions for open the box and go,” Storlie said. “Plus, the added convenASV’s ELITE line of high-performance, heavy-duty lubri- ience means you’re less likely to procrastinate your filter cants. The engine oil, hydraulic oil and grease products are changes, helping ensure the long-term health of your extensively tested for use in optimizing ASV equipment and machine.” ASV maintenance kits are available through ASV’s dealer network. They are compatible with all current machines as well as many older models. For more information, visit www.asvi.com. 

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT www.oklahomaterritoryequipment.com Oklahoma City, OK 405-917-9191 Tulsa, OK 918-835-7200

Garton Tractor Inc. www.gartontractor.com 2400 N Golden State Blvd. • Turlock, CA 95382 209-632-3931 Fairfield, CA • 707-425-9545 Merced, CA • 209-726-4600 Modesto, CA 95356 • 209-538-0911 Newman, CA • 209-862-3760 Santa Rosa, CA • 707-586-1790 Stockton, CA 95206 • 209-948-5401 Tulare, CA 93274 • 559-686-0054 Ukiah, CA 95482 • 707-468-5880

CLM EQUIPMENT CO. INC. www.clmequipment.com Lafayette, LA 337-837-6693 Lake Charles, LA 337-625-5942 Houston, TX 281-598-2500

BANE MACHINERY INC. www.banemachinery.com Dallas, TX 800-594-2263 Ft. Worth, TX 800-601-2263 Tyler, TX 800-594-2200

COLUMBIA WESTERN MACHINERY Columbiawesternmachinery.com 11125 SW Tonquin Road Sherwood, OR 97140 503-454-0902

The maintenance kits include replacement filters for service intervals. All parts included are OEM. The ASV maintenance kits include hydraulic filter(s), an engine oil filter, fuel filter(s) and air filters. The packaged kits remove the guesswork from the process of replacing filters by including all required components in one package.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 49

www.cooperequip.com

Cooper Equipment Co. 201 Commerce Blvd. Georgetown, TX 78626 512-930-5151

www.apcoequipment.com

APCO EQUIPMENT

3432 N 5th Street North Las Vegas, NV 89032 800-574-4089

www.tri-westtractor.com

TRI-WEST TRACTOR, INC. 6281 Southfront Road Livermore, CA 94551 925-455-8200

www.beardequipco.com

www.westraxmachinery.net

Westrax Machinery

Dealer Im mprint Area19618 S. Susana Rd.

BEARD EQUIPMENT CO. 4509 I-20 • Midland, TX 79706 432-694-4530

Rancho Dominguez, CA 90221 800-411-4717 19885 Temescal Canyon Rd Corona, CA 92881 800-411-4717 611 N. Golden Key St. Gilbert, AZ 85233 602-397-8173

www.shaferequipmentco.com

Shafer Equipment Company, Inc. 955 Greg Street • Sparks, NV 89431 775-235-4069

www.raseq.com

Rasmussen Equipment Co. 3333 West 2100 South West Valley City, UT 84119 801-972-5588

Page 50 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

THE TORO® DINGO® TXL 2000 DOES THE WORK OF SEVERAL MACHINES IN ONE. Dig below grade, reach over obstacles and extend your workiing range with the powerful telescoping arms. Enjoy

FMI Equipment

360˚ visibility from the stand-on

www.fmiequipment.com

operator platform. You can even use most skid steer and compact track

Toro® Dingo® TXL 2000

loader attachments with the universal

WITH TELESCOPING ARMS

mounting plate. Call 1-800-344-8676, option 1, to find a dealer near you.

OUT. T STANDING.

11111 E Trent Avenue Spokane, WA 99206 509-927-4071 1947 Saint Street Richland, WA 99354 509-505-5997

Topcon 3D-MC With Volvo Active Control Ups Precision The semi-autonomous digging functionality offered by Volvo Active Control on the Dig Assist suite of tools from Volvo CE can now be used with Topcon 3D-MC software on applicable models. Delivering excavation accuracy in a fraction of the normal time and automating the digging process, Topcon and Volvo have raised the bar in excavation works, according to the manufacturers. Excavating to grade to produce the same uniform results day after day will always be a task for skilled operators, but there are tools available to help improve performance and streamline the process. Volvo Active Control helps operators of all skill levels by automating the digging process and now, due to integration with Topcon 3D-MC, an abundance of new and more complex projects will be possible. Seamless Integration Topcon’s easy-to-use software seamlessly integrates with the Volvo Active Control menus, allowing operators to quickly customize how they want “Autos” to function. Whether digging trenches, grading slopes, or creating site profiles, the partnering of Topcon 3D-MC with Volvo Active Control will help operators produce perfect results,

and automated back grading. Introduced in 2019, this steer-by-wire machine control system guides the operator through functions to automate the digging process, producing perfect results, up to 45 percent faster than traditional grading. When using the Boundary Limits package, operators can automatically stop the swing motion at a set angle to assist in digging and truck loading. And if working in a tight space, operators can pre-set boom and bucket elevation and swing to avoid side or overhead obstacles.

For Volvo customers in North America, Volvo Active Control currently is available the EC220E, EC250E and EC300E.

quickly and efficiently, time after time. Better Visibility, Enhanced Control 3D software is the ideal choice for complex and larger infrastructure projects, providing more detailed, realistic visualizations and helping to improve efficiency and reduce costly errors. The latest updates to Topcon 3D-MC for Volvo include over-the-

air access to Sitelink3D, support for LandXML files, a refreshed graphical user interface and an over-the-air remote support function. Efficiency, Accuracy Benefits The latest version of Volvo Active Control software supports auto-tilt feature for tilt buckets and Steelwrist tiltrotators, as well as a return-to-dig feature called Bucket Recall,

Applicable Models For Volvo customers in Europe, Oceania and Asia, Volvo Active Control currently is available on the Volvo EC220E, EC250E, EC300E and EC350E Crawler Excavators. For customers in North America, it is offered on three models, the EC220E, EC250E and EC300E. Volvo Active Control will be extended to additional models in 2022. As a fully integrated and factory-fitted Volvo system, all the components, hardware and software of Volvo Active Control are supported by Volvo dealers. For more information, visit www.volvoce.com. 

Page 52 • November 21, 2021 • www.constructionequipmentguide.com • Trailer Section • Construction Equipment Guide

see CHART page 55

MFG/ MODEL

FELLING

FT-10 CL FT-12 CL FT-6 CL FT-3 Mini FT-10 (E,L,P) FT-10 I FT-10 WD FT-12 (E,L,P) FT-12 I FT-12 WD FT-14 (E,L,P) FT-14 I FT-14 WD FT-16 (E,P) FT-16 I FT-16 WD FT-20 I FT-20 WD FT-24 I FT-20-3 WD FT-24-3 (E) FT-30-3 I FT-3 FT-5 FT-10 IT-E FT-10 IT-I FT-10 T PAN TILT FT-12 IT-E FT-12 IT-I FT-12 T PAN TILT FT-14 IT-E FT-14 IT-I FT-14 T PAN TILT FT-16 IT-E FT-16 IT-I FT-16 T PAN TILT FT-20 IT-I FT-3 T PAN TILT FT-6 T PAN TILT FT-7 T-1 PAN TILT FT-5 EZ-T FT-7 EZ-T FT-12 EZ-T FT-10-2 FT-12-2 FT-14-2 FT-16-2 FT-18-2 FT-18-3 FT-20-2 / LP FT-20-3 FT-24-2 / LP FT-24-3 FT-30-2 / LP FT-30-3 FT-36-3 / LP FT-40-2 / LP FT-45-2 / LP Limited FT-45-2 / LP FT-45-3 / LP FT-50-3 / LP Limited FT-50-3 / LP FT-60-3 / LP FT-60-4 / LP FT-14-2T (TILT) FT-16-2T (TILT) FT-20-2T (TILT) FT-24-2T (TILT) FT-30-2T (TILT) FT-40-2T (TILT) FT-50-3T (TILT) FT-20-2 TA (AIR TILT) FT-24-2 TA (AIR TILT) FT-30-2 TA (Air Tilt) FT-40-2 TA (Air Tilt) FT-45-2 TA (Air Tilt) FT-50-3 TA (Air Tilt) FT-6 DT (Dump) FT-10 DT (Dump) FT-12-2 DT (Dump) FT-12 DT HD (Dump) FT-14-2 DT (Dump)

WEIGHT CAP. LBS. (KG)

EQUIP. WEIGHT EMPTY LBS. (KG)

7,480 (3,393) 11,100 (5,340) 5,000 (2,267) 2,330 (1,056) 7,480 (3,393) 7,000 (3,175) 7,380 (3,348) 11,100 (5,340) 11,520 (5,225) 11,000 (4,999) 12,900 (5,851) 12,500 (5,670) 12,900 (5,851) 14,800 (6,713) 14,400 (6,532) 14,700 (6,667) 18,400 (8,346) 19,000 (8,618) 21,080 (9,561) 17,100 (7756) 23,100 (10,477) 27,000 (12,247) 1,800 (816) 4,900 (2,223) 7,380 (3,348) 6,580 (2,985) 7,380 (3,348) 10,600 (4,808) 11,100 (5,035) 10,600 (4,808) 12,650 (5,737) 12,100 (5,488) 12,650 (5,737) 14,800 (6,713) 14,200 (6,441) 14,800 (6,713) 17,720 (8037) 1,800 (816) 5,350 (2,427) 6,200 (2,812) 4,550 (2,064) 5,600 (2,540) 10,300 (4,672) 6,180 (2,803) 8,900 (4,036) 10,900 (4,944) 12,600 (5,715) 14,900 (6,758) 14,900 (6,758) 20,000 (9,072) 17,000 (7,711) 24,000 (10,886) 24,000 (10,886) 30,000 (13,608) 29,700 (13,472) 36,000 (16,329) 36,320 (16,474) 45,000 (20,411) 45,000 (20,412) 45,000 (20,412) 50,000 (22,680) 50,000 (22,680) 60,000 (27,216) 60,000 (27,216) 10,700 (4,853) 12,800 (5,806) 19,500 (8,845) 24,000 (10,886) 30,000 (13,608) 36,320 (16,475) 50,000 (22,680) 19,700 (8,936) 24,000 (10,886) 30,000 (13,608) 36,320 (16,475) 45,000 (20,411) 50,000 (22,680) 4,500 (2,041) 7,000 (3,175) 10,000 (4,535) 9,900 (4,490) 11,700 (5,307)

2,500 (1,134) 2,900 (1,315) 1,900 (862) 660 (299) 2,500 (1,134) 2,980 (1,352) 2,600 (1,179) 2,700 (1,225) 2,980 (1,352) 2,800 (1,270) 3,200 (1,452) 3,600 (1,633) 3,200 (1,452) 3,600 (1,633) 4,000 (1,814) 3,700 (1,678) 4,600 (2,086) 4000 (1,814) 4,900 (2,222) 5,900 (2,676) 4,500 (2,041) 6,850 (3,107) 1,100 (499) 1,200 (544) 2,600 (1,179) 3,400 (1,542) 2,600 (1,179) 3,200 (1,452) 3,400 (1,542) 3,200 (1,452) 3,450 (1,565) 4,000 (1,814) 3,450 (1,565) 3,600 (1,633) 4,200 (1,905) 3,600 (1,633) 5,280 (2394) 1,100 (499) 1,650 (748) 1,800 (816) 1,550 (703) 1,750 (794) 3,500 (1,588) 3,800 (1,724) 4,900 (2,222) 5,200 (2,359) 5,800 (2,631) 5,800 (2,631) 5,800 (2,631) 5,900 (2,676) 5,900 (2,676) 6,500 (2,948) 6,100 (2,767) 7,300 (3,311) 7,600 (3,447) 8,250 (3,742) 8,600 (3,900) 9,400 (4,264) 8,900 (4,037) 9,900 (4,491) 11,000 (4,990) 10,700 (4,853) 11,400 (5,171) 12,700 (5,760) 5,400 (2,450) 5,600 (2,540) 6,400 (2,903) 7,300 (3,311) 8,300 (3,765) 9,200 (4,173) 11,200 (5,080) 6,200 (2,812) 8,500 (3,855) 9,200 (4,173) 9,200 (4,173) 9,200 (4,173) 11,200 (5,080) 2,500 (1,134) 2,980 (1,352) 4,000 (1,814) 3,900 (1,769) 4,400 (1,996)

DECK SIZE FT. (M) 14 (4.3) 14 (4.3) 10 (3) 8 (2.4) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 18 (5.5) 18 (5.5) 16 (4.9) 20 (6.1) 20 (6.1) 20 (6.1) 18 (5.5) 20 (6.1) 22 (6.7) 10 (3) 12 (3.7) 16 (4.9) 16 (4.9) 12 (3.7) 16 (4.9) 16 (4.9) 14 (4.3) 16 (4.9) 16 (4.9) 14 (4.3) 16 (4.9) 16 (4.9) 16 (4.9) 24 (7.3) 10 (3) 12 (3.7) 14 (4.3) 8.5 (4) 11.5 (5.2) 18.5 (8.4) 16+5 18+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+6 20+5 24+5 24+6 24+5 24+6 28+5 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24+6 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 8 (2.4) 10 (3) 12 (3.7) 12 (3.7) 12 (3.7)

MFG/ MODEL

WEIGHT CAP. LBS. (KG)

FELLING CONT. FT-14 DT HD (Dump) FT-16-2 DT (Dump) FT-16 DT HD (Dump) FT-20-2 DT (Dump) FT-24-2 DT (Dump) FT-30-2 DT (Dump) FT-12E SD(Side Dump) FT-14E SD(Side Dump) FT-16E SD(Side Dump) FT-3GEN (Generator) FT-6GEN (Generator) FT-7GEN (Generator) FT-7-1GEN (Generator) FT-10GEN (Generator) FT-12GEN (Generator) FT-14GEN (Generator) FT-16GEN (Generator) FT-20GEN (Generator) FT-24GEN (Generator) FT-3 Coil FT-6 Coil FT-10 UPT (Pole) FT-12 UPT (Pole) FT-15 UPT (Pole) FT-20 UPT (Pole) FT-24 UPT (Pole) FT-30 UPT (Pole) FT-40 UPT (Pole) FT-12 UPT-C (Pole/Cargo) FT-14 UPT-C (Pole/Cargo) FT-16 UPT-C (Pole/Cargo) FT-20 UPT-C (Pole/Cargo) FT-14 PCD (Pole Cargo Dump) FT-16 PCD (Pole Cargo Dump) FT-20 PCD (Pole Cargo Dump) FT-3 R (Reel) FT-6 R (Reel) FT-8 R (Reel) FT-10 R (Reel) FT-14-2 R (Reel) FT-14-2 R Turret (Reel) FT-14-2 R Double Reel FT-50-2 MX (Semi) FT-70-2 MX (L,H) (Semi) FT-80-2 MX (L,H) (Semi) FT-80-3 MX (L,H) (Semi) FT-100-3 MX (L,H) (Semi) FT-100-4 MX (L,H) (Semi) FT-70-2 NN-HX (Semi) FT-70-2 NN-LX (Semi) FT-80-3 NN-HX (Semi) FT-80-3 NN-LX (Semi) FT-100-3 NN-HX (Semi) FT-100-3 NN-LX (Semi) FT-70-2 PH-HT (Semi) FT-70-2 PL-HT (Semi) FT-80-2 PH-HT (Semi) FT-80-2 PL-HT (Semi) FT-80-3 PH-HT (Semi) FT-80-3 PL-HT (Semi) FT-100-3 PH-HT (Semi) FT-100-3 PL-HT (Semi) FT-70-2 HX (Semi) FT-80-2 HX (Semi) FT-80-3 HX (Semi) FT-100-3 HX (Semi) FT-70-2 OTR-L (Semi) FT-80-2 OTR-L (Semi) FT-80-3 OTR-L (Semi) FT-100-3 OTR-L (Semi) FT-70-2 OTR-H (Semi0 FT-80-2 OTR-H (Semi) FT-80-3 OTR-H (Semi) FT-100-3 OTR-H (Semi) FT-24 S (Sprayer) FT-30 S (Sprayer) FT-40 S (Sprayer) FT-24 WT FT-30 WT FT-40 WT FT-24 TS FT-30 TS

11,900 (5,397) 13,100 (5,942) 13,600 (6,168) 17,100 (7,756) 20,200 (9,163) 26,500 (12,020) 10,300 (4,672) 12,100 (5,488) 14,400 (6,531) 2,850 (1,293) 5,300 (2,404) 6,100 (2,767) 6,350 (2880) 7,480 (3,393) 10,300 (4,672) 12,400 (5,624) 14,400 (6,532) 18,000 (8,165) 22,400 (10,160) 1,800 (816) 6,000 (2,721) 7,980 (3,620) 10,250 (4,649) 13,675 (6,203) 18,550 (8,414) 23,100 (10,478) 29,950 (13,585) 36,658 (16,628) 8,600 (3,900) 10,700 (4,853) 12,800 (5,805) 17,100 (7,756) 10,100 (4,581) 12,800 (5,805) 17,100 (7,756) 1,890 (857) 6,080 (2,758) 7,200 (3,266) 9,400 (4,263) 13,200 (5,987) 16,100 (7,302) 12,800 (5,806) 50,000 (22,680) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 79,700 (36,151) 80,000 (36,287) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 24,000 (10,886) 36,320 (16,474) 36,320 (16,474) 24,000 (10,886) 30,000 (13,608) 36,320 (16,474) 24,000 (10,886) 30,000 (13,608)

EQUIP. WEIGHT EMPTY LBS. (KG)

DECK SIZE FT. (M)

4,200 (1,905) 12 (3.7) 5,300 (2,404) 14 (4.3) 4,800 (2,177) 12 (3.7) 5,900 (2,676) 14 (4.3) 7,400 (3,357) 14 (4.3) 8,000 (3,629) 14 (4.3) 3,500 (1,588) 14+5 4,000 (1,814) 14+5 4,000 (1,814) 18+5 1,000 (454) 6 (1.8) 1,300 (590) 8 (2.4) 1,600 (725) 10 (3) 1,350 (612) 10 (3) 2,500 (1,134) 12 (3.7) 2,900 (1,315) 12 (3.7) 3,000 (1,361) 12 (3.7) 3,200 (1,452) 14 (4.3) 4,000 (1,814) 18 (5.5) 4,000 (1,814) 18 (5.5) 1,100 (499) 8 (2.4) 1,500 (680) 8 (2.4) 3,520 (1,597) 20-30 (6-9) Opt. 24-40 (7-12) 3,550 (1,610) 20-30 (6-9) Opt. 24-40 (7-12) 3,575 (1,622) 20-30 (6-9) Opt. 24-40 (7-12) 4,450 (2,018) 24-40 (7-12) Opt. 29-46 (9-14) 4,500 (2,041) 24-40 (7-12) Opt. 29-46 (9-14) 4,550 (2,041) 24-40 (7-12) Opt. 29-46 (9-14) 5,110 (2,317) 29-46 (13 - 21) 5,200 (2,359) 20-30 (6-9) Cargo 10 (3) 5,400 (2,449) 20-30 (6-9) Cargo 10 (3) 5,600 (2,540) 20-30 (6-9) Cargo 10 (3) 5,900 (2,676) 20-30 (6-9) Cargo 10 (3) 5,800 (2,631) 24-40 (7-12) Cargo 12 (3.7) 6,000 (2,722) 24-40 (7-12) Cargo 12 (3.7) 6,500 (2,948) 24-40 (7-12) Cargo 12 (3.7) 1,100 (499) 12 (3.7) 1,920 (871) 12 (3.7) 2,000 (907) 12 (3.7) 2,100 (953) 12 (3.7) 2,900 (1,315) 15 (4.5) 3,000 (1,361) 15 (4.5) 3,300 (1,497) 23 (7.5) 12,000 (5,443) 34 (10.4) 12,500 (5,670) 38 (11.6) 12,800 (5,806) 38 (11.6) 15,900 (7,212) 38 (11.6) 17,300 (7,847) 38 (11.6) 19,500 (8,845) 38 (11.6) 10,500 (4,763) 39 (11.9) 10,500 (4,763) 39 (11.9) 12,500 (5,670) 44 (13.4) 12,500 (5,670) 44 (13.4) 13,500 (6,123) 44 (13.4) 13,500 (6,123) 44 (13.4) 16,000 (7,257) 45 (13.7) 17,000 (7,711) 45 (13.7) 17,000 (7,711) 45 (13.7) 17,000 (7,711) 45 (13.7) 20,500 (9,299) 45 (13.7) 20,500 (9,299) 45 (13.7) 21,500 (9,752) 45 (13.7) 21,000 (9,525) 45 (13.7) 12,500 (5,669) 48 (14.6) 12,800 (5,806) 48 (14.6) 14,250 (6,464) 48 (14.6) 14,700 (6,668) 48 (14.6) 12,500 (5,669) 48 (14.6) 12,500 (5,669) 48 (14.6) 15,000 (6,804) 48 (14.6) 16,500 (7,484) 48 (14.6) 12,500 (5,669) 48 (14.6) 12,900 (5,851) 48 (14.6) 15,000 (6,804) 48 (14.6) 16,500 (7,484) 48 (14.6) 6,600 (2,994) 20 (6.1) 8,100 (3,674) 22 (6.7) 8,100 (3,674) 22 (6.7) 6,600 (2,994) 20 (6.1) 7,300 (3,311) 22 (6.7) 8,100 (3,674) 22 (6.7) 6,600 (2,994) 20 (6.1) 7,300 (3,311) 20 (6.1)

Construction Equipment Guide • Trailer Section • www.constructionequipmentguide.com • November 21, 2021 • Page 53

4VYL 4VKLSZ -VY 4VYL 4HYRL[Z

0; 0 :LYPLZ

0UK\Z[YPHS ;PS[

,A ;PS[

*(33 c =PZP[ ^^^ -LSSPUN JVT *,. c [YHPSLYZ'MLSSPUN JVT

0:6 *LY[PMPLK 8\HSP[` 4HUHNLTLU[ :`Z[LT ࠮ >),5* *LY[PMPLK >), ࠮ ,X\HS 6WWVY[\UP[` ,TWSV`LY

Page 54 • November 21, 2021 • www.constructionequipmentguide.com • Trailer Section • Construction Equipment Guide

Factors to Consider When Investing in a Rental Trailer

As a rental company responsible for maintaining units, durability and reliability are the most important factors.

Partners Vs. Vendors Rental businesses have a unique position in the market and for long-term ROI on equipment, it’s best to foster a long-term relationship with a trusted partner. A simple one-time interaction with a vendor may get rental agencies through in a bind, but modern rental companies need to invest time and communication in strategic relationships with vendors. Make sure when you’re investing in a new trailer or work truck for your rental company, that the manufacturer is willing to invest their time in you and your success.

By Chris Pokornowski SPECIAL TO CEG

Across the country, contracting professionals rely on renting trucks, trailers and equipment to complete jobs that are outside their normal scope of work, are large in scope, have unique requests or require specialized equipment. Rental companies are responsible for finding and maintaining a large variety of trailers, trucks and other equipment that help their customers work their projects with ease. The experts at Towmaster Trailers put together a guide for rental companies on how to help you identify the best trailers to invest that offer long term ROI and durability, despite rigorous use. Rental Trailers Experience High Impact Work Not all people who rent trailers, trucks or other equipment take care of it as they would their own. That means over time rented resources go through a lot of heavy use without necessarily the same concern or care as an owned trailer or piece of equipment. As a rental company responsible for maintaining units, durability and reliability are the most important factors. Particularly when trailers have to last through a variety of rigorous tasks without compromising dependability. Ensure Your Rental Trailer Is Up To Task Renters tend to rely on two specific types of trailers: dump and utility trailers. Dump trailers are excellent for general contracting and landscaping projects because they can move volumes of bricks, dirt, mulch, debris and even small equip-

Renters tend to rely on two specific types of trailers: dump and utility trailers.

ment when needed. The additional benefit is the ability to dump the load when feasible rather than manually unloading it. A utility trailer is another great option for most contracting projects. Utility trailers can be used to haul lawn care or power equipment, haul supplies like pavers and bricks, and move construction or landscaping debris, or other materials. There are several considerations to make when investing in a rental trailer. You have to ensure it’s a sound investment for your company and will lead to long term ROI. That likely means investing in carefully crafted trailers made of durable materials. Another consideration to make is how to support your customers, the renters, in reaching their own goals and successfully accomplishing their projects. Here are some features to look for when when making those considerations on your rental trailer investments:

• High gauge steel floor • Minimal amount of seams in the trailer bed • Smart charging system that indicates how much life is left in the battery • Dump trailer ramps for easy maneuvering and access • Safety feature module that confirms the circuit is reaching the trailer brakes • Hand held remote for dumping to ease operation and keep users safe • Scissor hoist system to provide durability during dumping • Rolling tarp • Electric or Hydraulic surge free-backing brakes that allow for reversing without the trailer locking • LED lights for visibility • Protected wiring systems • High quality paint finish • A manufacturer that stands behind their product and service

What’s Your Warranty Rented trailers go through dozens of different users a year, so a clear and comprehensive warranty becomes all the more important. When investing in a new trailer for your rental company, compare warranties to ensure you’re well covered to avoid costly repairs and work orders. Building the Best Towmaster Trailers has partnered with rental companies across the country to provide resilient, versatile trailers that offer long term ROI, even through rigorous rental usage. If you want to know more about how to make equipment investments that will last for years, reach out to the Towmaster Trailers team today. Chris Pokornowski is the director of sales at Towmaster Trailer Division and has served in various sales and leadership positions since 1995. He is responsible for developing impactful sales strategies, keeping atop industry trends and insights, and leading the training and development of the sales team. 

Construction Equipment Guide • Trailer Section • www.constructionequipmentguide.com • November 21, 2021 • Page 55

CHART from page 52

MFG/ MODEL

see CHART page 56

WEIGHT CAP. LBS. (KG)

FELLING CONT. FT-40 TS FT-12-2 TT (Tender) FT-14-2 TT (Tender) FT-16-2 TT (Tender) FT-18-2 TT (Tender) FT-20-2 TT (Tender) FT-24-2 TT (Tender) FT-30-2 TT (Tender) FT-40-2 TT (Tender) FT-45-2 TT (Tender) FT-45-3 TT (Tender) FT-50-2 (NN) TT (Tender) FT-70-2 (NN) TT (Tender) FT-75-2 (NN) TT (Tender) FT-80-3 (NN) TT (Tender) FT-100-4 (NN) TT (Tender) XF-70-2 HDG XF-80-2 HDG XF-80-3 HDG XF-100-2 HDG XF-100-3 HDG XF-110-2 HDG XF-110-3 HDG XF-120-3 HDG XF-70-2 HDG-L XF-80-2 HDG-L XF-100-2 HDG-L XF-100-3 HDG-L XF-110-3 HDG-L XF-120-3 HDG-L XF-HD-100-3 HDG XF-HD-110-3 HDG XF-HD-120-3 HDG XF-100-3 HDG-SL XF-110-3 HDG-SL XF-120-3 HDG-SL XF-AG-70-2 HDG XF-AG-100-2 HDG XF-AG-100-3 HDG XF-AG-110-3 HDG XF-AG-70-2 HDG-L XF-AG-80-3 HDG-L XF-AG-100-3 HDG-L XF-AG-110-3 HDG-L XF-Flip 20-1 XF-Jeep 80-2 FT-50-2 RGT-L FT-70-3 RGT-L

MFG/ MODEL

36,320 (16,474) 14,000 (6,350) 14,000 (6,350) 16,000 (7,257) 18,000 (8,165) 20,000 (9,072) 24,000 (10,886) 30,000 (13,608) 36,320 (16,474) 45,000 (20,411) 45,000 (20,411) 50,000 (22,680) 70,000 (31,752) 75,000 (34,019) 80,000 (36,287) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431) 70,000 (31,752) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 70,000 (31,751) 80,000 (36,287) 100,000 (45,359) 110,000 (49,895) 20,000 (9,071) 80,000 (36,287) 50,000 (22,680) 70,000 (31,752)

TRAILER TYPE

ROGERS BROTHERS TAG21XL TAG21XL-Air Ramps TAG21XXL TAG21XXL-Air Ramps TAG25XL TAG25XL-AL TAG25XXL TAG25XXL-AL TAG25XXL-AL-Air Ramps TVT25 TVT35 MH25 MH35 PT35 CR40PL CR40PL-R3 CR35GR CY50PL SP55PL SP55GR CN55PL CN55GR

Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Tag-Along Fixed Gooseneck Fixed Gooseneck Fixed Gooseneck Fixed Gooseneck Fixed Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck Detachable Gooseneck

EQUIP. WEIGHT EMPTY LBS. (KG) 8,100 (3,674) 3,200 (1,451) 2,600 (1,179) 2,800 (1,270) 3,200 (1,451) 5,900 (2,676) 7,300 (3,311) 4,500 (2,041) 6,400 (2,903) 6,800 (3,084) 6,800 (3,084) 7,500 (3,402) 10,000 (4,536) 11,000 (4,990) 12,000 (5,443) 18,000 (8,165) 14,500 (6,577) 15,500 (7,031) 18,200 (8,255) 16,200 (7,348) 18,200 (8,255) 15,500 (7,031) 18,500 (8,391) 19,500 (8,845) 15,300 (6,940) 16,000 (7,257) 17,000 (7,711) 18,700 (8,482) 19,000 (8,618) 20,000 (9,072) 18,700 (8,482) 19,000 (8,618) 20,000 (9,072) 18,900 (8,573) 19,500 (8,845) 20,500 (9,299) 16,500 (7,484) 22,700 (10,296) 23,200 (10,523) 23,000 (10,432) 17,200 (7,801) 23,200 (10,523) 23,800 (10,795) 23,200 (10,523) 2,500 (1,133) 7,500 (3,401) 14,300 (6,486) 16,600 (7,530)

WEIGHT CAP. LBS. (KG) 42,000 (19,051) 42,000 (19,051) 42,000 (19,051) 42,000 (19,051) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 70,000 (31,751) 50,000 (22,680) 70,000 (31,751) 70,000 (31,751) 80,000 (36,287) 80,000 (36,287) 70,000 (31,751) 100,000 (45,359) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431)

DECK SIZE FT. (M) 20 (6.1) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 16 (4.9) 16 (4.9) 16 (4.9) 24 (7.3) 33 (10.1) 38 (11.6) 38 (11.6) 42 (12.8) 48 (14.6) 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 38 (11.6) 40 (12.2)

MFG/ MODEL

LANDOLL 440B-48 440B-50 440B-53 455B-48 455B-50 455B-53 835-23-43 835-27-47 835-30-50 835-32-52 835-23-44 835-27-48 835-30-51 835-32-53 855-53 855-53 (10'9"N) 855-54 860 930E-45-12 930E-48-12 930E-48-15 930E-51-15 950E-48-12 950E-48-15 950E-51-15 950E-52-14 950E-53-15

MFG/ MODEL

WEIGHT CAP. LBS. (KG)

EQUIP. WEIGHT EMPTY LBS. (KG)

80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359)

18,200 (8,255) 19,400 (8,800) 19,900 (9,026) 20,190 (9,158) 22,870 (10,374) 24,060 (10,913) Consult Factory Consult Factory 17,740 (8046) Consult Factory Consult Factory Consult Factory 17,740 (8046) Consult Factory 23,900 (10,840) Consult Factory Consult Factory 25,400 (11,521) 17,265 (7,831) 17,660 (8,010) 18,770 (8,513) 19,250 (8,731) 20,413 (9,259) 21,419 (9,738) 21,560 (9,779) 21,780 (9,879) 21,900 (9,933)

WEIGHT CAP. LBS. (KG)

EQUIP. WEIGHT EMPTY LBS. (KG)

80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 90,000 (40,823) 96,000 (43,545) 105,500 (47,854) 50,000 (22,680) 56,000 (25,401)

15,500 (7,031) 15,500 (7,031) 17,500 (7,938) 19,500 (8,845) 21,500 (9,752) 23,000 (10,433) 14,000 (6,350) 14,750 (6,690)

DECK SIZE FT. (M) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 23x8.5 (7.01x2.6) 27x8.5 (9.64x2.6) 30x8.5 (16.6x2.6) 32x8.5 (9.75x2.6 23x8.5 (7.01x2.6) 27x8.5 (8.22x2.6) 30x8.5 (9.14x2.6) 32x8.5 (9.75x2.6 26x8.5 (7.9x2.6) 27x8.5 (9.64x2.6) 27x8.5 (9.64x2.6) 26x8.5 (7.9x2.6) 45x8.5 (13.7 x 2.6) 48x8.5 (14.6x2.6) 48x8.5 (14.6x2.6) 51x8.5 (15.5x2.6) 48x8.5 (14.6x2.6) 48x8.5 (14.6x2.6) 51x8.5 (15.5x2.6) 52x8.5 (15.5x2.6) 53x8.5 (15.5x2.6)

DECK SIZE FT. (M)

SIDUMPR SDR240-49 SDR240-73 SDR342.49 SDR348-4986 SDR449-4971 SDR550-6049 SDR231.49AG SDR235.49AG

EQUIP. WEIGHT EMPTY LBS. (KG)

DECK SIZE FT. (M)

SUSPENSION TYPE

NO. OF AXLES

8,910 (4,042) 9,750 (4,423) 9,410 (4,268) 10,100 (4,581) 10,880 (4,935) 10,800 (4,898) 11,940 (5,416) 11,860 (5,380) 12,740 (5,779) 10,630 (4,822) 12,500 (5,670) 12,490 (5,665) 14,700 (6,668) 16,550 (7,507) 15,480 (7,022) 16,955 (7,691) 18,300 (8,301) 19,020 (8,627) 21,070 (9,557) 26,400 (11,975) 25,590 (11,607) 26,140 (11,857)

22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 18x8.5 (5.5x2.6) 20x8.5 (6.1x2.6) 22x8.5 (6.7x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 26x8.5 (7.9x2.6) 24x8.5 (7.3x2.6)

Spring Spring Spring Spring Spring Spring / Air (w/lift) Spring / Air (w/lift) Spring / Air (w/lift) Spring / Air (w/lift) Spring Spring Spring Spring Air Air Air Air Air Air (w/3rd axle lift) Air (w/3rd axle lift) Air (w/3rd axle lift) Air (w/3rd axle lift)

2 2 2 2 3 3 3 3 3 2 2 2 2 2 2 3 2 3 3 3 3 3

36 (11) Tub 36 (11) Tub 36 (11) Tub 36/38 (11/12) Tub 38/40 (12/12.2)Tub 38/40 (12/12.2)Tub 28 (8.5) Tub 24 (7.3) Tub

FEATURE

Air Ramps

Air Ramps Air Ramps

Full Width GN Full Width GN Air Ramps Gentle Riser Gentle Riser

Gentle Riser

Page 56 • November 21, 2021 • www.constructionequipmentguide.com • Trailer Section • Construction Equipment Guide

CHART from page 55

MFG/ MODEL

see CHART page 58

WEIGHT CAP. LBS. (KG)

EAGER BEAVER SK5 SK6 SK7 SK8 SK9 B6DOW B8DOW B9DOW 10HDB-PT 10HA-PT 12HDB-PT 12HA-PT 15HDB-PT 20XPT 25XPT 25XPL 25GLB 35GLB 35GSL/S4S 35GSL/S 35GSL/BR 35GSL-PT 50GLB 50GSL/3 50GSL/BR 50GSL-PT 55GSL/3 55GSL/PT 60GSL/3 60GSL/PT 65GSL/3 70GSL/3 50GLB/OF (Oil Field) 60GLB/4-OF (Oil Field) 70GLB/5-OF (Oil Field)

MFG/ MODEL

SMITHCO. SX1-2317 SX2-3024 SX2-3327 SX2-4034 SX3-3734 SX3-4234 SX3-4436 SX3-4636 SX3-4936 SX4-3734 SX4-4636 SX4-4936 SX5-3734 SX5-4636 SX5-4936 S2-4034-MHVSR S2-4236-MHVSR S3-4234-MHVSR S3-4436-MHVSR S3-4636-MHVSR S2-4034-SHV S2-4236-SHV S3-4234-SHV S3-4436-SHV S3-4636-SHV CP-20 CP-30 50 Ton Mine Series 60 Ton Mine Series 70 Ton Mine Series 80 Ton Mine Series 90 Ton Mine Series 100 Ton Mine Series

10,000 (4,536) 12,000 (5,442) 14,000 (6,350) 16,000 (7,257) 18,000 (8,165) 12,000 (5,442) 16,000 (7,257) 18,000 (8,163) 20,000 (9,070) 20,000 (9,070) 24,000 (10,884) 24,000 (10,884) 30,000 (13,605) 40,000 (18,140) 50,000 (22,675) 50,000 (22,675) 50,000 (22,675) 70,000 (31,745) 70,000 (31,745) in 12 ft. 70,000 (31,745) in 12 ft. 70,000 (31,745) in 12 ft. 70,000 (31,745) in 16 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 16 ft. 110,000 (49,885) in 12 ft. 110,000 (49,885) in 16 ft. 120,000 (54,420) in 12 ft. 120,000 (54,420) in 16 ft. 130,000 (58,967) in 12 ft. 140,000 (63,503) in 12 ft. 100,000 (45,350) in 12 ft. 120,000 (54,420) in 12 ft. 140,000 (63,500) in 16 ft.

EQUIP. WEIGHT EMPTY LBS. (KG)

SUSPENSION TYPE

3,250 (1,474) 3,370 (1,529) 3,570 (1,619) 3,700 (1,678) 4,100 (1,860) 4,200 (1,905) 4,800 (2,177) 4,600 (2,086) 5,800 (2,630) 5,880 (2,667) 6,450 (2,925) 6,530 (2,961) 8,100 (3,673) 8,380 (3,800) 11,720 (5,315) 11,720 (5,315) 11,600 (5,261) 13,900 (6,304) 15,500 (7,029) 15,900 (7,211) 17,100 (7,755) 18,200 (8,253) 23,000 (10,432) 20,500 (9,297) 21,600 (9,795) 22,700 (10,297) 22,500 (10,206) 23,425 (10,625) 22,750 (10,773) 24,500 (11,115) 26,500 (12,020) 27,790 (12,605) 21,600 (9,797) 25,120 (11,393) 28,600 (12,972)

Torflex Torflex Torflex Torflex Torflex Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Spring/Lift Axle Leaf Spring Single Point Spring Leaf Spring Single Point Spring Single Point Spring Air Ride Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle

DECK SIZE WxL FT. (M)

NO. OF AXLES

14 (4.3) 14 (4.3) 16 (4.9) 16 (4.9) 16 (4.9) 20x8 (6.1x2.4) 20x8 (6.1x2.4) 20x8 (6.1x2.4) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 28x8.5 (8.5x2.6) 28x8.5 (8.5x2.6) 18x8.5 (5.5x2.6) 18x8.5 (5.5x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 39x8.5 (17.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 40x8.5 (12.2x2.6) 43x8.5 (13.1x2.6) 43.5x8.5 (13.2x2.6)

WEIGHT CAP. LBS. (KG)

EQUIP. WEIGHT EMPTY LBS. (KG)

DECK SIZE FT. (M)

50,000 (22,680) 60,000 (27,216) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 40,000 (18,144) 60,000 (27,216) 100,000 (45,359) 120,000 (54,431) 140,000 (63,503) 160,000 (72,575) 180,000 (86,183) 200,000 (90,718)

10,500 (4,743) 12,400 (5,625) 13,100 (5,942) 14,100 (6,396) 16,300 (7,394) 16,700 (7,575) 17,100 (,7756) 17,500 (7,938) 17,800 (8,074) 19,500 (8,845) 19,800 (8,981) 20,050 (9,095) 20,700 (9,389) 21,000 (9,525) 21,300 (9,662) 14,400 (6,532) 14,700 (6,668) 17,200 (7,802) 17,400 (7,893) 17,600 (7,983) 14,600 (6,622) 14,800 (6,713) 17,600 (7,983) 17,900 (8,119) 18,100 (8,210) 17,000 (7,711) 18,500 (8,391) Varies due to options Varies due to options Varies due to options Varies due to options Varies due to options Varies due to options

17 (5.2) 24 (7.3) 27 (8.2) 34 (10.4) 34 (10.4) 34 (10.4) 36 (11) 36 (11) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 34 (10.4) 36 (11) 36 (11) 24 (7.3) 22 (6.7) Built to Order Built to Order Built to Order Built to Order Built to Order Built to Order

2 2 2 2 2 2 2 3 2 2 2 2 2 2 3 3 2 2 2 2 2 2 3 3 3 3 3 or 4 3 or 4 3 or 4 3 or 4 3 to 7 3 to 7 3 4 5

NO. OF AXLES 1 2 2 2 3 3 3 3 3 4 4 4 5 5 5 2 2 3 3 3 2 2 3 3 3 2 2 3 3-4 3-4 3-4 3-4 3-4

SPEED RATING MPH (KPH) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104)

SPEED RATING MPH (KPH) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 20 (32) 20 (32) 45 (72) 45 (72) 45 (72) 45 (72) 45 (72) 45 (72)

Construction Equipment Guide • Trailer Section • www.constructionequipmentguide.com • November 21, 2021 • Page 57

Page 58 • November 21, 2021 • www.constructionequipmentguide.com • Trailer Section • Construction Equipment Guide

CHART from page 56

MFG/ MODEL

BAUER SDT36 SDT27

WEIGHT CAP. LBS. (KG)

EQUIP. WEIGHT EMPTY LBS. (KG)

SUSPENSION TYPE

DECK SIZE FT. (M)

NO. OF AXLES

SPEED RATING MPH (KPH)

80,000 (36,287) 60,000 (27,216)

30,000 (13,608) 22,500 (10,206)

Hydraulic Hydraulic

24 (7.3) 18 (5.5)

3 2

20 (32.2) 20 (32.2)

STANDARD DECK LENGTH FT. (M)

LOADED DECK LENGTH FT. (M)

MFG/ MODEL

FONTAINE HH

WEIGHT CAP. LBS. (KG)

(a) - Extendable Trailer - Rating In fully retracted position

Fontaine Heavy-Haul Renegade N12 Fontaine Heavy-Haul Renegade 14 Fontaine Heavy-Haul Renegade N14 Fontaine Heavy-Haul Renegade 18 Fontaine Heavy-Haul Renegade N18 Fontaine Heavy-Haul Renegade 20 Fontaine Heavy-Haul Renegade N20 Fontaine Heavy-Haul Renegade 20C Fontaine Heavy-Haul Renegade X20 Fontaine Heavy-Haul Renegade XN20 Fontaine Heavy-Haul Renegade X20C Fontaine Heavy-Haul Workhorse 50 Fontaine Heavy-Haul Workhorse 51 Fontaine Heavy-Haul Workhorse 55LCC Fontaine Heavy-Haul Workhorse 55PVR Fontaine Heavy-Haul Magnitude 55H FLD Fontaine Heavy-Haul Magnitude 55H DSR Fontaine Heavy-Haul Magnitude 55L Plus Fontaine Heavy-Haul Magnitude 60LCC Fontaine Heavy-Haul Magnitude 60DRS Fontaine Heavy-Haul Magnitude 55H MFLD Fontaine Heavy-Haul Magnitude 55H MDSR Fontaine Heavy-Haul Magnitude 55H MBMD Fontaine Heavy-Haul Magnitude 55MX Fontaine Heavy-Haul Magnitude 60 MFLD (3+1) Fontaine Heavy-Haul Magnitude 60 MDSR (3+1) Fontaine Heavy-Haul Magnitude 60 MBMD (3+1) Fontaine Heavy-Haul Magnitude 60HD MFLD (3+2) Fontaine Heavy-Haul Magnitude 60HD MDSR (3+2) Fontaine Heavy-Haul Magnitude 60HD MBMD (3+2) Fontaine Heavy-Haul Magnitude 65 MFLD Fontaine Heavy-Haul Magnitude 65 MDSR Fontaine Heavy-Haul Magnitude 65 MBMD Fontaine Heavy-Haul Magnitude 75 MFLD Fontaine Heavy-Haul Magnitude 75 MDSR Fontaine Heavy-Haul Magnitude 75 MBMD Fontaine Heavy-Haul Magnitude 80 MFLD Fontaine Heavy-Haul Magnitude 80 MDSR Fontaine Heavy-Haul Magnitude 80 MBMD Fontaine Heavy-Haul Xcalibur 4880 Fontaine Heavy-Haul Xcalibur 5390 Fontaine Heavy-Haul TraverseHT

MFG/ MODEL

EQUIP. WEIGHT EMPTY LBS. (KG)

XL 80 Low-Profile HDG XL 110 Low-Profile HDG XL 110 Low-Profile HDG: 18" Deck XL 110 Low-Profile HDG: 15" Deck XL 120 Low-Profile HDG XL 110 Cheater HDG XL 80 SDE (Step Deck Extendable) XL 120 SDE (Step Deck Extendable) XL 70 MFG (Mechanical Full-width Gooseneck) XL 100 HFG (Hydraulic Folding Gooseneck) XL 70 MDE (Mechanical Detachable Extendable) XL 80 MDE (Mechanical Detachable Extendable) XL 90 MDE (Mechanical Detachable Extendable) XL 80 HDE (Hydraulic Detachable Extendable) XL 90 HDE (Hydraulic Detachable Extendable) XL 100 HDE (Hydraulic Detachable Extendable) XL 110 HDE (Hydraulic Detachable Extendable) XL 120 HDE (Hydraulic Detachable Extendable) XL 80 Power Tail

60,000 (27,216) in 16 ft. (4.9) 60,000 (27,216) in 16 ft. (4.9) 60,000 (27,216) in 16 ft. (4.9) 80,000 (36,287) distributed 80,000 (36,287) distributed 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 80,000 (36,287) in 16 ft. (4.9) (a) 100,000 (45,359) in 12 ft. (3.7) 102,000 (46,266) in 12 ft. (3.7) 110,000 (49,895) in 13 ft. (4.0) 110,000 (49,895) in 16 ft. (4.9) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 120,000 (54,431) in 12 ft. (3.7) 120,000 (54,431) in 13 ft. (4.0) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 12 ft. (3.7) 110,000 (49,895) in 16 ft. (4.9) (a) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 120,000 (54,431) in 12 ft. (3.7) Up to 140,000 (63,503) in 12 ft. (3.7) Up to 140,000 (63,503) in 12 ft. (3.7) Up to 140,000 (63,503) in 12 ft. (3.7) Up to 150,000 (63,503) in 12 ft. (3.7) Up to 150,000 (63,503) in 12 ft. (3.7) Up to 150,000 (63,503) in 12 ft. (3.7) Up to 180,000 (81,647) in 16 ft. (4.9) Up to 180,000 (81,647) in 16 ft. (4.9) Up to 180,000 (81,647) in 16 ft. (4.9) 80,000 (36,287) distributed (a) 80,000 (36,287) distributed (a) 80,000 (36,287) distributed

WEIGHT CAP. LBS. (KG) 80,000 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431) 110,000 (49,895) 80,000 (36,287) 120,000 (54,431) 70,000 (31,751) 100,000 (45,359) 70,000 (31,751) 80,000 (36,287) 90,000 (40,823) 80,000 (36,287) 90,000 (40,823) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 80,000 (36,287)

(b) - Modular bogie connection

20,525 (9,310) 18,390 (8,348) 19,215 (8,723) 15,340 (7,321) 16,165 (7,820) 15,340 (7,203) 16,165 (7,332) 15,340 (6,965) 20,040 (9,376) 20,865 (9,464) 20,040 (9,097) 18,720 (8,677) 20,200 (9,235) 22,040 (9,997) 23,480 (10,650) 21,640 (9,816) 22,635 (10,267) 22,960 (10,414) 24,260 (11,004) 24,993 (11,337) 21,940 (9,952) 22,935 (10,403) 20,635 (9,237) 27,110 (12,297) 24,990 (11,335) 25,190 (11,426) 22,410 (10,165) 28,960 (13,136) 29,160 (13,227) 26,020 (11,802) 32,400 (14,698) 32,646 (14,808) 27,501 (12,474) 34,914 (15,837) 35,160 (15,948) 30,015 (13,615) 37,620 (17,064) 38,860 (17,627) 36,860 (16,719) 16,190 (7,344) 17,380 (7,883) 17,700 (8,029)

32.91 (10.0) 29.2 (8.9) 29.2 (8.9) 29 (8.8) 29 (8.8) 29 (8.8) 29 (8.8) 27.6 (8.4) 29 - 50 (8.8 - 15.2) 29 - 50 (8.8 - 15.2) 27.6 - 47.2 (8.4 - 14.4) 24 (7.1) 25 (7.6) 26 (7.9) 24 (7.3) 25, 26, 27 (7.6, 7.9, 8.2) 26 (7.9) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26, 27 (7.6, 7.9, 8.2) 26 (7.9) 26 (7.9) 29 - 50 (8.8 - 15.2) 25, 26 (7.6, 7.9) 25, 26 (7.6, 7.9) 25, 26 (7.6, 7.9) 26 (7.9) 26 (7.9) 26 (7.9) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 48 - 80 (14.6 - 24.4) 53 - 90 (16.2 - 27.4) 38.1 (11.6)

NO. OF SPEED RATING GOOSENECK AXLES MPH (KPH) STYLE

(c) - Axle count includes trailer & booster; does not include optional jeep 12 (30.5) 14 (35.6) 14 (35.6) 18 (45.7) 18 (45.7) 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8) 24 (60.9) 22 (55.9) 18 (45.7) 22 (55.9) 22 (55.9) 14.5 (36.8) @ Drop Side (b) 18 (45.7) 18 (45.7) 14.5 (36.8) @ Drop Side 22 (55.9) (b) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 20 (50.8) (b) 22 (55.9) (b) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 22 (55.9) (b) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 24 (61) (b) 14.75 @ Drop Side (b) Beam/Rail Deck (b) 24 (61) (b) 15.0 (38.1) @ Drop Side (b) Beam/Rail Deck (b) 24 (61) (b) 16.0 (40.6) @ Drop Side (b) Beam/Rail Deck (b) 59 (149.9) 60 (152.4) 35 (88.9)

2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 2 to 3 3 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 4 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 5 (c) 3 to 6 (c) 3 to 6 (c) 3 to 6 (c) 2 or 3 2 or 3 2

55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5)

Hydraulic Mechanical Hydraulic Mechanical Hydraulic Mechanical Hydraulic Mechanical Mechanical Hydraulic Mechanical Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Flatbed Flatbed Stepdeck

CONCENTRATED WEIGHT LBS. (KG)

DECK SIZE FT. (M)

80,000 in 10 ft. (3 m) 110,000 (49,895) in 12 ft. (3 m) 100,000 (45,359) in 12 ft. (4.8) 110,000 (49,895) in 12 ft. (3 m) 110,000 (49,895) in 10 ft. (3 m) 110,000 (49,895) in 10 ft. (3 m) 60,000 (27,215) in 10 ft. (3 m) closed 100,000 (45,359) in 10 ft. (3 m) closed 70,000 (31,751) in 16 ft. (4.8 m) 100,000 (45,359) in 10 ft. (3 m) 50,000 (22,680) in 10 ft. (3 m) closed 60,000 (27,215) in 10 ft. (3 m) closed 70,000 (31,751) in 10 ft. (3 m) closed 60,000 (27,215) in 10 ft. (3 m) closed 70,000 (31,751) in 10 ft. (3 m) closed 80,000 (36,287) in 10 ft. (3 m) closed 90,000 (40,823) in 10 ft. (3 m) closed 100,000 (45,359) in 10 ft. (3 m) closed 50,000 (22,680) in 10 ft. (3 m)

26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 24x8.5 (7.32x2.59) 38 to 62.8x8.5 (11.5 to 19.14x2.59) 38 to 57.8x8.5 (11.58 to 17.61x2.59) 29x8.5 (8.84x2.59) 23.5x8.5 (7.16x2.59) 29x8.5 (8.84x2.59) 29x50.33 (8.8x15.34) 29x50.34 (8.8x15.34) 28.58 to 49.92x8.5 (8.71 to 15.21x2.59) 28.58 to 49.92x8.5 (8.71 to 15.21x2.59) 24.08 to 49.42x8.5 (7.33 to 15.06x2.59) 24.08 to 49.42x8.5 (7.33 to 15.06x2.59) 27.08 to 46.42x8.5 (8.25 to 14.14x2.59) 39 x 8.5 ft. (11.9x2.59)

Construction Equipment Guide • Trailer Section • www.constructionequipmentguide.com • November 21, 2021 • Page 59

MFG/ MODEL

TOWMASTER TC-10D TC-12D TC-12D TC-12D TC-12D TC-14D TC-14D TC-14D T-12D T-12D T-12D T-12D T-14D T-14D T-14D T-16D T-16D T-16D T-18D T-18D T-18D T-20D T-20D T-20D T-3DT T-6DT T-6DT T-12DT T-12DT T-12DT T-14DT T-14DT T-16DT T-16DT T-14T T-16T T-20T T-24T T-30T T-40T T-50T T-40TA T-50TA TC-14 T-14 T-16 T-20 T-20LP T-24 T-24LP T-30 T-40 T-40LP T-50 T-50LP T-50RG T-70RG T-70DTG T-100DTG T-110DTG T-120DTG T-80J T-70HT T-70HT T-70HT T-70HT T-80HT T-80HT T-80HT T-80HT T-110HT T-110HT T-110HT T-110HT

WEIGHT CAP. LBS. (KG)

EQUIP. WEIGHT EMPTY LBS. (KG)

10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 16,000 (7,250) 16,000 (7,250) 18,000 (8,100) 18,000 (8,100) 18,000 (8,100) 20,000 (9,072) 20,000 (9,072) 20,000 (9,072) 3,000 (1,360) 5,000 (2,260) 5,000 (2,260) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 16,000 (7,250) 14,000 (6,350) 16,000 (7,250) 17,300 (7,847) 24,000 (10,880) 30,000 (13,608) 40,000 (18,100) 50,000 (22,600) 40,000 (18,100) 50,000 (22,600) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 19,000 (8,618) 19,000 (8,618) 24,000 (10,880) 24,000 (10,880) 30,000 (13,600) 18,000 (8,100) 40,000 (18,100) 50,000 (22,600) 50,000 (22,600) 50,000 (22,600) 70,000 (31,750) 70,000 (31,750) 100,000 (45,350) 110,000 (49,900) 120,000 (54,400) 80,000 (36,287) 70,000 (31,750) 70,000 (31,750) 70,000 (31,750) 70,000 (31,750) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 110,000 (49,900) 110,000 (49,900) 110,000 (49,900) 110,000 (49,900)

2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 3,400 (1,542) 3,400 (1,542) 3,400 (1,542) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 4,200 (1,905) 4,200 (1,905) 4,200 (1,905) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 1,100 (500) 2,000 (907) 2,000 (907) 3,900 (1,769) 3,900 (1,769) 3,900 (1,769) 4,400 (1,995) 4,400 (1,995) 4,500 (2,041) 4,500 (2,041) 5,560 (2,521) 6,460 (2,930) 8,600 (3,900) 8,600 (3,900) 9,800 (4,445) 10,500 (4,763) 12,000 (5,443) 12,100 (5,488) 12,600 (5,715) 6,400 (2,903) 6,400 (2,903) 5,900 (2,676) 6,900 (3,130) 6,900 (3,130) 6,900 (3,130) 6,900 (3,130) 8,300 (3,765) 8,800 (3,992) 8,600 (3,901) 10,700 (4,853) 10,600 (4,808) 11,300 (5,125) 12,600 (5,715) 15,200 (6,895) 18,800 (8,528) 19,100 (8,664) 20,000 (9,072) 7,500 (3,402) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 22,800 (10,342) 22,800 (10,342) 22,800 (10,342) 22,800 (10,342)

SUSPENSION TYPE Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Torflex Torflex Torflex Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell Ridewell

DECK SIZE FT. (M)

NO. OF AXLES

SPEED RATING MPH (KPH)

6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 7x16 (2x4.8) 7x18 (2x5.4) 7x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 4.5x10 (1.3x3) 6.4x12 (1.9x3.6) 6.4x14 (1.9x4.2) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x26 (2.5x7.9) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x16 (2.4x4.8) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x22 (2.5x6.7) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x22 (2.5x6.7) 8.5x25.6 (2.5x7.8) 8.5x26.6 (2.5x8.1) 8.5x27.6 (2.5x8.4) 8.5x29.6 (2.5x9.0) 8.5x25.6 (2.5x7.8) 8.5x26.6 (2.5x8.1) 8.5x27.6 (2.5x8.4) 8.5x29.6 (2.5x9.0) 8.5x25.6 (2.5x7.8) 8.5x26.6 (2.5x8.1) 8.5x27.6 (2.5x8.4) 8.5x29.6 (2.5x9.0)

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 3 2 3 2 2 2 2 2 2 2 2 2 2 3 3 2 2 2 3 3 3 2 2 2 2 2 2 2 2 2 3 3 3 3

55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88)

Page 60 • November 21, 2021 • www.constructionequipmentguide.com • Trailer Section • Construction Equipment Guide

Keep These Beneficial Trailer Maintenance Tips in Mind Trailers play a key role in the construction industry — whether they’re moving equipment or materials, no work gets accomplished on the job site until trailers are called into service. As with all construction equipment, a trailer must properly perform to help keep work on schedule … and maintenance is the key to accomplish this. However, there are two factors that can contribute to trailer maintenance being overlooked or neglected. First, compared with other types of construction equipment, trailers are relatively simple in design and as such, can often be an afterthought when keeping up with inspections. And second, machine operators in the cab of equipment, such as a dozer or excavator, receive constant feedback on the condition of the equipment. Instrument panel alerts or an odd noise coming from the engine will be noticed immediately and acted upon. In the case of trailers, however, the truck driver is isolated from the trailers, so issues such as a bad bearing can go unnoticed. According to Tri-State Trailer Sales Director of Service Greg Brown, prevention is the solution to keeping trailers operating safely and profitably. It sounds pretty obvious, but the key to maintenance is proper inspections,” he said. Brown urged that inspections should be a regular part of the routine every time prior to a trailer leaving the equipment yard. A complete inspection form is available from the U.S. Department of Transportation; however, the primary areas of concern for daily inspections include a look at every functional point of the trailer. A review should be done to ensure there are no issues with the running gears and tires should be checked for wear. Hub oil levels, lights and brakes also should be checked. A walk-

A cracked brake drum (seen here) is a good example of a problem a driver can catch on a pre-trip inspection.

around of the trailer to look for signs of structural damage also is important. Brown also recommends that spot checks by qualified service personnel be conducted regularly to confirm that the driver is performing thorough inspections. Brown advises that maintaining a regular, professionally conducted preventive maintenance schedule at three-month intervals or a

Shown here are a new air bag, new brake chamber and a new brake drum.

Seen here is the bottom of the coupler plate on a trailer with a relatively new FHWA inspection. It was most likely not unhooked from the tractor during the inspection.

set number of miles based on usage should also be implemented. “Staying on top of maintenance and keeping the trailer in good condition is much less expensive than paying for safety violations or having an accident,” Brown said. These inspections can save a lot of money on repair service, as well, Brown added. “Catching the fact that a hub is low on oil allows the owner to address the issue before it leads to bigger problems.” The preventive maintenance schedule should review the following primary components of a trailer that may not be immediately apparent during daily inspections: • braking system, including the anti-lock braking system; • bearings; • suspension (axle, shocks, airbags); • main frame, including cross members; • electrical system; and • tires An annual Federal Highway Administration (FHWA) inspection, conducted by a qualified inspector is required for all commercial vehicle fleets. Brown cautioned that it is crucial to use a reputable technician for these inspections. “Unfortunately, we see a lot of FHWA stickers on trailers that should not have passed inspection,” he said. “At Tri-State Trailers Sales, we approach every inspection and service we perform as though that trailer will be traveling on the road next to our family car.”  CEG

Construction Equipment Guide • Trailer Section • www.constructionequipmentguide.com • November 21, 2021 • Page 61

What can you haul in a side dump trailer? Nearly anything.

Superior Stability

Faster Cycle Times

Easier Unloading

With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com

Page 62 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 63

PERFORMANCE WHERE IT COU C NTS TS

www.andersonmachinerytexas.com

FINANCING

A LOW AS AS

Austin, TX

Odessa, TX

(512) 272-8133

(432) 561-8933

Corpus Christi, TX

San Antonio, TX

(361) 289-6043

(210) 661-2366

Pharr, TX

Victoria, TX

(956) 781-5995

(361) 575-8111

Page 64 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby-Smith Machinery www.kirby-smith.com 6715 W. Reno Ave Oklahoma City, OK 73127 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 800-375-3733

Amarillo, TX 800-283-1247 Lubbock, TX 866-289-6087 Odessa, TX 877-794-1800

Abilene, TX 877-577-5729

Tri-West Tractor, Inc. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

Balaji Sreenivasan, CEO and founder of Aurigo software.

Biz Plans to Transform Federal Highway Admin.’s Capital Program Management Aurigo Software, a leading provider of capital planning and construction management solutions for public and private owners, announced it had entered into a 10-year contract with the Federal Highway Administration (FHWA) Office of Federal Lands Highway (FLH) to modernize capital roadway construction planning and management. “Getting selected by the Federal Highway Administration as its construction technology platform is a monumental step in Aurigo’s journey of building a better tomorrow. We are thrilled that the FHWA has chosen Aurigo Masterworks to streamline their delivery of critical infrastructure,” said Balaji Sreenivasan, CEO and founder of Aurigo software. “The U.S. Federal Government spends more than $20 billion annually on roads, bridges, dams, and that number is about to get much bigger when the bipartisan infrastructure bill is passed. Aurigo is excited to be at the forefront along with FHWA in helping America build a better tomorrow.” The Office of Federal Lands Highway (FLH) operates in all 50 states and provides engineering and construction expertise that supports more than 500,000 mi. of roadway, 8,500 bridges, 35,000 trails, and more than 400 transit systems for federallyowned transportation facilities. FLH is distinctive in FHWA as the agency which directly delivers projects similar to the state DOTs and local public agencies. FLH undertakes many unique programs and projects that are geographically and environmentally complex. FLH sought to replace old construction management systems with a single-platform, interoperable solution that would offer seamless integration across the capital planning and management lifecycle, and support workers in the field with mobile capabili-

ties. Masterworks 2021 will enable FHWA’s internal staff of more than 500 employees as well as hundreds of external vendors to collaborate over the same, cloud-based platform. The system will make offline mobile updates possible at remote project locations, improve document management, replace existing cost estimating systems and facilitate electronic bidding and construction administration workflows. Aurigo’s Masterworks product suite has been available on the Federal Risk and Authorization Management Program (FedRAMP) marketplace since late 2020, meeting the stringent security and compliance standards required by federal agencies. FHWA joins Aurigo’s growing customer list of major U.S. capital owners, including Utah and Nevada’s Departments of Transportation, and the cities of Houston, Seattle and Las Vegas. About Aurigo Software Aurigo provides modern, cloud-based solutions for capital infrastructure and private owners to help them plan with confidence, build with quality and maintain their assets efficiently. With more than $300b of capital programs under management, Aurigo’s solutions are trusted by over 300 customers in transportation, water and utilities, healthcare, higher education, and the government on over 40,000 projects across North America. Aurigo helps capital program executives make better decisions based on proprietary artificial intelligence and machine learning technology. Aurigo is a privately held U.S. corporation headquartered in Austin, Texas, with global offices in Canada and India. For more information, visit www.aurigo.com. 

Ditch Witch of East Texas www.witchequipment.net 7717 Highway 69 Tyler, TX 75706 903-592-6226

Ditch Witch of Arizona www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351 Tucson, AZ 520-579-0261

Equipment Share www.equipmentshare.com 295 S Redwood Rd North Salt Lake, UT 84054 385-229-2560 • 385-377-3074

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 65

Waukesha-Pearce Industries, Inc.

Garton Tractor Inc.

Power MotiveCorporation

www.wpi.com

www.gartontractor.com

www.powermotivecorp.com

12320 South Main St. Houston, TX 77035 713-551-0506 Tomball, TX 281-351-9016 Corpus Christi, TX 361-884-8275 San Antonio, TX 210-648-4444

Beaumont, TX 409-721-5305 Edinburg, TX 956-386-0107 Austin, TX 512-251-0013 Buffalo, TX 903-322-7150

4088 Russell Road Fairfield, CA 94534 707-425-9545 Santa Rosa, CA 707-586-1790 Ukiah, CA 95482 707-468-5880

DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

Milliken 970-587-1188

Colorado Springs 719-576-5541

Cheyenne 307-634-5149

Grand Junction 970-241-1550

Durango 970-259-0455

Nueces Power Equipment www.nuecespower.com 4697 FM 1516 N Converse, TX 78109 210-310-0066 7667 N Sam Houston Pkwy Humble, TX 77396 713-247-0066

Page 66 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings

on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted

WANTED (US): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI EX 400 AND 450 SIZES EXCAVATORS. EMAIL: IUKANDCO@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CAT WHEEL LOADERS - WE NEED CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS HITACHI EXCAVATORS – WE NEED TO BUY HITACHI EXCAVATORS ZX 200-1, ZX 330, ZX 450, ZX 650, ZX 850 EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. ALSO KOMATSU EXCAVATORS PC400, KOMATSU PC 450-6, KOMATSU PC 7506. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW, THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADERS - LOOKING TO BUY THESE MODELS OF USED CATERPILLAR WHEEL LOADER 950B, 950E, 966E, 966F ,966F-II. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA-600-3, WA-600-6, WA-30, WA-40, WA 50. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE INTERESTED IN BUYING JOHN DEERE EXCAVATORS 790, 495 & 595 AND HITACHI EXCAVATORS EX 270-1, EX 270-5, EX 300-1, EX 400-1 AND EX 450-5. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE INTERESTED TO BUY CAT USED WHEEL LOADER 916, 926, 936, 950B/E, 966E/D/F, 970F, 980C, 980F. IF AVAILABLE PLEASE EMAIL US: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE LOOKING TO BUY A COUPLE OF UNITS OF HITACHI EXCAVATORS EX 330-5 & EX 450-5. IF YOU HAVE ANY OF THEM AVAILABLE PLEASE LET ME KNOW THROUGH EMAIL EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR MOTOR GRADERS - WE ARE INTERESTED TO BUY CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS. WE ARE LOOKING TO BUY CAT 966F, CAT 966FII, CAT 980C, AND CAT 980F. EMAIL: AHMED@IUKANDCO.COM: PHONE: 300-369-5360 –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE.. MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VWERIZON.NETR; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 –––––––––––––––––––––––––––––––– WANTED (WV): NELSON 6000 WELDERS - LOOKING FOR NELSON DUAL GUN SYSTEM WITH GEN SET AND TRAILER, AND/OR PRO-WELD DUAL GUN ARC 3000 MACHINE. EMAIL: WEH@TRIANGLEINCORPORATED.COM; PHONE: 304-562-6282 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CHALLENGER 85C TRACTORS - I AM IN NEED OF A USED SET OF TRACKS FOR ANY OF THE CAT CHALLENGER 65, 75 OR 85C. EMAIL: PI2279@YAHOO.COM; PHONE: 319-470-8388 –––––––––––––––––––––––––––––––– WANTED (MA): ALL MODELS CATERPILLAR EXCAVATORS - LOWER SUPPORT RAIL GOES FRONT TO BACK RIGHT SIDE AND TOOL BOX RH SIDE LOWER RAIL THAT GOES FRONT TO BACK SUPPORTING TOOL BOX. EMAIL: BILLD@TDICENZO.COM; PHONE: 207-214-9610 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX270,EX300,EX330,EX400,EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE LOOKING FOR CAT 966F, CAT 980C, CAT 980F AND CAT 966E/D. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS, MODEL 580SK, 580L, 580LII, 580SL, 580SLII, 580M, 580MII, 580MIII 580SMII, 580SMIII, 580SMIII EMAIL: FRANKHORAN@GROFFTRACTOR.COM; PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY USED HITACHI EXCAVATORS EX200LC, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODELS. I NEED TO BUY CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 ––––––––––––––––––––––––––––––––

WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S-3 OFF-HIGHWAY TRUCKS LOOKING FOR REAR END DIFFERENTIAL FOR 30 TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 67

Crews Install Underground Pipeline to Avert Disasters By Chuck MacDonald CEG CORRESPONDENCE

Cave Buttes Dam is an earthen flood control dam built on Cave Creek Wash in northern Phoenix, Ariz. The dam was constructed by the U.S. Army Corps of Engineers in 1980 with the Flood Control District of Maricopa County serving as the local sponsor. The structure protects thousands of homes and businesses and more than 1 million people from potential flash floods like the ones that devastated the city in the early 1900s. Since the dam’s construction, seepage through the embankment has been observed twice during significant flood pool impoundments, representing a potential dam safety issue for the downstream population and infrastructure. The District decided to take action before a potential threat became a disaster, creating a plan to reduce dam safety risk for downstream residents by constructing an auxiliary outlet for the dam. The District engaged a joint venture of SSC Underground and Coffman Specialties to construct a tunnel under the dam that would reduce the time it takes for the dam to drain after a large flood event. Once complete, the underground pipeline would act as a safety valve to release controlled amounts of water into Cave Creek Wash where water has naturally flowed for many years. The steel pipeline extended a distance of nearly 1,000 ft., burrowing 50 ft. underneath the dam. The construction process took 20 months to complete. The 60-in. diameter pipeline was encased in grout. The construction was completed at a cost of $14.3 million. Launching Tunnel Boring Machine The first phase of the job was to create a pit 20-ft. deep to launch the tunnel boring machine (TBM). Components of the tunnel boring project included a 68-in. American Augers rock boring machine; an Akkerman SP400 jacking system and an Akkerman 524 haul unit. Once they had room to operate, workers could begin boring and inserting the pipeline in 20-ft.-long sections. They did, however, quickly encountered problems. “The condition of the ground was constantly changing,” said Michelle Walker, vice president of SSC Underground and one of the project managers. “The TBM bored through soft dirt, then through rock, then harder rock and sometimes through clay. Our progress varied widely. The best day was 40 feet, and the worst day was two feet.” The head of the boring device had to be changed because the original head was not ideal for the mixed conditions. “Some of the rock was so hard that we burned up the cutters trying to get through one foot,” said Walker. “Then it could all change again within five feet.” The team at SSC Underground succeeded in drilling a 68in.-diameter tunnel to accommodate a 60-in. pipe with holes every 10 ft. that served as ports to pump grout through. This grout became a concrete sleeve around the pipe to prevent water from flowing through the space between the pipe and surrounding earth. Finishing the grouting process required one month after the pipe was inserted. Monitors placed inside the pipe kept the crews informed that the pipe did not float or move during grouting. “The rock and dirt we dug out was stockpiled by the county for future use on access roads and for maintenance around the dam,” said Walker. Once the pipe was in place, Coffman Specialties began building intake and outlet structures and installing the gate

on the north end in the intake structure. The concrete and steel structure at the north end included a metal cage covering to prevent debris from entering the pipe and clogging it. Coffman also built a hydraulically operated gate that could be opened to allow water to flow through the tube when necessary to relieve pressure on the dam. “Before this project, there was just one pipe underneath the dam,” said Walker. “Now there are two pipes, and the new one can be used for a controlled discharge of water when needed.” The construction team used cranes to lower the TBM into the pit and excavators to lower the pipes into the pit. Workers used Cat front-end loaders to move the spoils to stockpile locations and move the pipe around the site. The planning, design, permitting and approval process for the new auxiliary outlet consumed nearly 10 years. “Now that the project is complete, our team feels a huge sense of accomplishment,” said Walker. “We were able to complete it on budget and on schedule. In addition, homes and businesses located less than a mile from the dam now have a new level of safety from flooding.”  CEG Cranes were used to set shore boxes to create a safe work environment for the bore pit.

The inlet structure under construction.

Page 68 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Buying or Selling? Call any of these professional auction companies

Why Use Iron Bound? That’s easy... It’s SIMPLE and EFFECTIVE! We’ll market and sell your equipment, get top dollar for you and we’ll take the hassle out of the process.

THE T TIME IS NOW W

A Strategic As sset Managemen nt Full Service e Auction House

Conveniently located for sellers in the Permian Basin, West Texas, the Panhandle & New Mexico.

Address: Iron Bound Solutions LLC 750 US HWY 180 Seminole, TX 79360

vantageauctions.c com

Phone: 432-209-5112

951.228.90040

Location:

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. NOVEMBER/DECEMBER 2021 CRANE SAFETY COURSES November 22, 2021 Qualified Rigger Level 1 Training, Houston, TX November 22 – November 23, 2021 Forklift Operator & Inspector Training, Orlando, FL November 29 – November 30, 2021 Qualified Signal Person Training, Houston, TX November 29 – December 3, 2021 Mobile Crane Train The Trainer, Cincinnati, OH November 30 – December 3, 2021 Overhead Crane Train The Trainer, Orlando, FL December 1 – December 2, 2021 Critical Lift Planning & Lift Director Training, Houston, TX December 6 – December 9, 2021 Overhead Hoist Maintenance Training, Cincinnati, OH December 6 – December 10, 2021 Mobile Crane Operator Training, Orlando, FL December 7 – December 9, 2021 Aerial Work Platform Train The Trainer, Houston, TX December 13 – December 16, 2021 Mobile Crane Inspector Training, Houston, TX December 14 – December 17, 2021 Overhead Crane Inspector Training, Houston, TX December 15 – December 17, 2021 Rigging Inspector Training, Orlando, FL December 20 – December 21, 2021 Aerial Work Platform Operator & Inspector Training, Houston, TX December 20 – December 23, 2021 Overhead Hoist Maintenance Training, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com MINNESOTA ASPHALT PAVEMENT ASSOCIATION (MAPA) 2021 Minnesota Asphalt Conference Date: December 2, 2021

Minneapolis Marriott Northwest (formerly Northland) 7025 Northland Dr. North, Minneapolis, MN 55428 Description: MAPA members are committed to the state and its overall quality of life. The industry is comprised of companies ranging from small driveway – paving operations to diverse larger construction companies that produce and/or place asphalt pavement on roads, airports, parking lots, recreational facilities, etc. It is MAPA's mission to serve our members by advancing the technology of asphalt pavement to their customers. We strive to accomplish this mission with our staff of Professional Engineers by providing technical assistance, training, and consultation. Join us at the Minneapolis Marriott Northwest to hear from our expert speakers on topics you don't want to miss! Registration is now open. Online registration is open through December 2. For more information, please visit https://asphaltisbest.com/. Contact MAPA Staff at info@mnapa.org. AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE) International Conference on Sustainable Infrastructure Dates: December 6 – 10, 2021 Given the global implications of burgeoning urbanization and the stewardship of existing and new public infrastructure, ICSI 2021 will focus on how to leverage sustainable infrastructure to help plan resilient communities, while preparing communities for the unknown. To lean into ASCE’s sustainability efforts to mitigate environmental effects and use resources wisely, ICSI 2021 will be held as a virtual event. Registration is now open! Join civil engineers, architects, policymakers, planners, financiers, and technologists to: • Discuss innovative and emerging trends • Share lessons learned in community-based resiliency • Demonstrate the value of sustainable infrastructure Key topics include: • Equitable and inclusive community infrastructure • Resilient recovery efforts • Technology and smart communities in infrastructure For more information about the virtual event, please visit www.icsiconference.org/about ASSOCIATED GENERAL CONTRACTORS OF MINNESOTA (AGCMN) 2022 Minnesota Construction Summit Date: January 11-12, 2022 Location: St. Paul RiverCentre 175 Kellogg Blvd. West St. Paul, Minnesota Description: The 2022 Minnesota Construction Summit is the event of the year for the Minnesota construction industry! Featuring inspirational keynote presentations, educational sessions on topics that

impact real life in our industry, exhibitors with relevant and vital products and services, and fantastic networking opportunities, this is an industry event not to be missed! Come and be a part of the 2022 Minnesota Construction Summit - Building Together Again. Registration is now open. Price: $200 For more information and to register, visit https://www.agcmn.org/events/constructionsummit./

Description: The AED Summit is your annual opportunity to come together with professionals across the heavy equipment industry spectrum to improve yourself and your team and to build meaningful connections. Companies travel from all over the world to attend Summit; don’t miss your chance to meet with like-minded industry professionals! Registration is now open! Visit https://aednet.org/events/summit for more information.

WORLD OF CONCRETE (WOC) World of Concrete 2022 Dates: January 18-20, 2022 (EXHIBITS) January 17-20, 2022 (EDUCATION) Location: Las Vegas Convention Center 3150 Paradise Road, Las Vegas, Nevada Description: When the world stopped, you kept going. Adapting. Giving a master class in resilience and being an essential worker. Now, celebrate how far you’ve come and discover the innovation helping our community evolve, endure, and thrive at WOC 2022. Part knowledge, part equipment, part connections—World of Concrete is 100% of what you need to keep grinding it out through disruptions to the supply chain, safety and beyond. Get your hands on advanced technology and machinery, access the newest training and techniques in concrete and masonry, and build momentum for another unstoppable year. EXHIBITS: Original equipment manufacturers from around the world and exclusive U.S. distributors of equipment, tools, products and services for the commercial construction, concrete and masonry industries. WOC attracts approximately 1,500 exhibiting companies and occupies more than 700,000 square feet of indoor and outdoor exhibit space. WHO ATTENDS WOC? More than 60,000 industry professionals from all around the world, representing all segments of the construction industry: Commercial Contractors, Concrete Contractors, Concrete Pumpers, Construction Managers, Dealers/Distributors, Decorative Concrete Contractors, Designers and Specifiers, General Contractors, Block/Segmental Unit Producers Masonry Contractors, Architects, Engineers, Block Producers, Ready Mix Producers, Rental Equipment Centers, Repair Contractors, Residential Contractors, Specialty Concrete Contractors, Precast, Pipe and Block Producers, Precast/Prestressed Producers, and more. Registration is now open! PLEASE BE ADVISED: You must register online prior to WOC 2022, as there will be NO onsite registration. Visit www.worldofconcrete.com for more information.

INDEPENDENT EQUIPMENT DEALERS ASSOCIATION (IEDA) 2022 Annual Meeting Dates: February 11–13, 2022 Location: Reunion Resort Kissimmee, FL Description: T'S OUR 20TH ANNIVERSARY SO WE'RE WHOOPING IT UP BIG! IEDA Is Growing – Which Means The 2022 Annual Meeting Will Be Exploding With The Best and The Brightest of the Industry More independent equipment companies than ever now recognize the stature IEDA membership brings to their reputation and the immense value membership pours into their daily business growth 52 weeks of the year. And when this booming group gathers in person for 60 supercharged hours, the collective, best-of-the-best brain power is electrifying. Registration is now open. For more information and to register, visit https://www.iedagroup.com/2022-annual-meeting/

ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) 2022 AED Summit Dates: January 17-19, 2022 Location: Disney’s Coronado Springs Resort Orlando, Florida

NATIONAL PAVEMENT EXPO (NPE) 2022 National Pavement Expo & Conference Dates: February 23-26, 2022 (Conference) February 23-25, 2022 (Expo) Location: Charlotte Convention Center Charlotte, NC Description: National Pavement Expo brings vendors and contractors together who make their living from asphalt and concrete paving, sealcoating, striping, sweeping, crack repair, pavement repair, and snow removal to network with other paving professionals and attend industry workshops. In addition to hosting 200+ leading brands from the paving and pavement maintenance industry, National Pavement Expo delivers more than 50 conference sessions over a 4-day span. Whether you want to increase industry knowledge, sharpen your skills, improve efficiency, or learn about the latest and greatest products, you can do it all here! The program design of the conference allows ample opportunity to meet and network with leading contractors in the paving industry. Registration is now open. For more information and to register, visit https://nationalpavementexpo.com

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 69

PUBLIC PUB LIC O ONLINE NLINE A AUCTION UCTI U CTION

James G. Murrphy Co. 4 425.486.1246 murphyauctio on.com

VEHICLES

-BID O ONLINENLIN NENO MINIMU UMS U MS NO RESERVES V

urphy Co. y

W/SIDE BO BOOM OM MO O MOWER WER (1 OF 2)

4,022 HRS

2008 KOMATSU W WA500-6

2000 KOMATSU K WA320

1991 CAT 140G G

2012 JOHN HN DEERE 6430 W/SIDE BO O MO OM WER BOOM MOWER (2 OF 2)

2002 PETERBILT 330

2005 KENWORTH T800B

2000 CAT D6RX XL

2012 JOHN HN DEERE 6430

Previe ew Updated Daily At Murphyauction.com MILE S 74,788 MILES

CAT 312CL

(1 OF 2)

2003 KENWORTH T800B ADDITIONAL ITEMS: •(3) WHEEL LOADERS •MOTOR GRADER •(3) CRAWLER DOZERS

4,936 HRS

2012 INTERNATIONAL 7400

2006 CAT T 257B

2009 KU UBOTA KX161-3

2005 5 KOMATSU D39EX-21

(2 OF 2)

2003 KENWORTH T800B •(5) EXCAVA AV VA AT TORS •SKIDSTEER LOADERS •(3) FORKLIFTS •(3) DUMP TRUCKS

2001 KENWORTH T800B •(3) TRACTOR TRUCKS •(19) TRAILERS AND MUCH MORE

THE WEBSITE IS UPDATED ATED DAIL LY! Y!

2007 GROVE RT6 600E

Page 70 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Online Wed., November 24, 2021 For: Late Model Construction Equipment (Mexico) • Buffalo, NY Sat., November 27, 2021 For: Construction, Utility, Ag Equipment, Trucks & more • Middletown, NY Tues., November 30, 2021 For: 52 Acres Sand & Gravel Operations plus Construction & Utility Equipment • Long Island, NY Thurs., December 2, 2021 For: Job Completion, Rental Returns & Utility Co. Auction • Newark, NJ Fri., December 3, 2021 For: Retirement Auction, Late Model Construction & Paving Equipment • Bushnell, FL February 5 - 13, 2022 For: Annual Florida Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Las Vegas, NV November 23, 2021 • Rocky Mountain Regional Event December 1, 2021 • Southeast Regional Event December 3, 2021 • Toronto, ON December 6 - 8, 2021 • Fort Worth, TX December 7 - 9, 2021 • Phoenix, AZ December 8, 2021 • Sacramento, CA December 8, 2021 • Great Plains Regional Event December 9, 2021 • Los Angeles, CA December 10, 2021 • Montreal, QC December 14 - 15, 2021 • Northeast Regional Event December 14 - 16, 2021 • Chehalis, WA December 15, 2021 • Great Lakes Regional Event December 16 - 17, 2021 • Truro, NS December 17, 2021 • Orlando, FL February 21 - 26, 2022 For: Annual Florida Auction

ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • Online Ends November 21, 2021 For: Sullivan County, NY Surplus Vehicle & Equipment Auction AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401 • ONLINE November 15 - 21, 2021 • ONLINE November 22 - 28, 2021 • ONLINE Nov. 29 – Dec. 5, 2021 • ONLINE December 6 – 12, 2021 • ONLINE December 13 - 19, 2021 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., December 11, 2021 For: Live & Online Monthly Public Auction • Woodburn, OR Fri., December 17, 21 For: Live & Online Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE November 23, 2021 • ONLINE November 30, 2021 • ONLINE December 7, 2021 • ONLINE December 14, 2021 • ONLINE December 21, 2021 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE November 24, 2021 • ONLINE December 1, 2021 • ONLINE December 8, 2021 • ONLINE December 15, 2021 • ONLINE December 22, 2021 BLACK STAR ACA www.blackstaraca.com 800-610-2192 • Live Virtual Thurs., December 9, 2021 For: Auctioneer-led Online Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com BUNCH BROTHERS AUCTIONEERS www.bunchbrothersauctioneers.com 270-376-2992 • Louisville, KY December 7 - 8, 2021 For: 2 Day Fall Louisville Auction DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., December 11, 2021 For: Consignment Sale DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Pendleton, IN Fri., December 10, 2021 For: 29th Annual Snowball Auction • Franklin, IN Fri., December 17, 2021 For: Brusco, LLC DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853 • Stoutsville, OH Sat., December 11, 2021 For: 2021 Winter Columbus Heavy Equipment Auction FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Englewood, OH Fri., December 3, 2021 For: Equipment Rental Store Auction • Holland, OH Thurs., December 16, 2021 For: Busch Inc. Retirement Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., December 10, 2021 For: Truck, Trailer & Equipment Auction I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Online Only Wed., December 1, 2021 For: Heavy Equipment, Truck, Trailer Auction

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Online Only – Timed Tues., November 23, 2021 For: Public Auction • Online Only – Timed Tues., November 30, 2021 For: Public Auction J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL December 7 - 8 2021 For: Trucks, Construction & Forestry Auction JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • Online December 2 - 9 2021 For: Kenmore Heavy Equipment, Contractors Equipment & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Online November 30, 2021 For: Farm Liquidation Online Auction • Online December 7, 2021 For: Government Surplus Online Auction • Pelzer, SC December 9, 2021 For: East Coast Construction & Transportation Public Auction • Kissimmee, FL February 14 - 16, 2022 For: Annual Florida Auction LlOYD MEEKINS & SONS AUCTION CO. www.meekinsauction.com 910-739-0547 • Lumberton, NC Tues., December 28, 2021 For: 27th Annual Construction, Truck, Farm Auction

MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311 • Online Auction Closes December 8, 2021 For: D&D Power • Chesapeake, VA Thurs., December 9, 2021 For: Webcast Only Skanska USA Auction

• Timed Online Nov. 24 – Dec. 3, 2021 For: Bell Energy Equipment Realignment Auction

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE Tues., November 30, 2021 For: Government Auction • ONLINE Wed., December 1, 2021 For: Vehicle & Equipment Auction • ONLINE Thurs., December 2, 2021 For: Construction Equipment Auction • ONLINE Thurs., December 2, 2021 For: Dolese Bros. Co. Equipment Auction • ONLINE Tues., December 7, 2021 For: Government Auction • ONLINE Wed., December 8, 2021 For: Ag Equipment Auction • ONLINE Thurs., December 9, 2021 For: Truck & Trailer Auction

• West Fargo, ND Wed., December 1, 2021 For: AgIron West Fargo Event

RES AUCTION SERVICES www.RES.bid 833-SOLD-RES • Wooster, OH Sat., December 11, 2021 For: Construction & Ag Equipment Auction

• Mt. Pleasant, IA December 16, 2021 For: AgIron Mt. Pleasant Event

SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-676-9800 • ONLINE Tues., November 30, 2021 For: Louie’s Tree Service Inventory Reduction Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online November 19 - 24, 2021 For: Online Steffes Auction Upper Midwest Locations • Timed Online Nov. 22 – Dec. 1, 2021 For: Steve Wentworth Sr Estate Auction • Timed Online Nov. 24 – Dec. 2, 2021 For: Ruach Resource Equipment Realignment Auction

• Timed Online Nov. 29 – Dec. 8, 2021 For: Brian Paumen Estate Auction • Timed Online Nov. 29 – Dec. 9, 2021 For: Arnold Companies, Inc. Auction

• West Fargo, ND December 1 - 8, 2021 For: Larry Woitalla Estate Logging Equipment Auction • Timed Online December 3 – 8, 2021 For: Online Steffes – Upper Midwest Locations • Timed Online December 6 - 16, 2021 For: AgIron Litchfield Event • Timed Online December 8 – 15, 2021 For: Steffes Construction Consignment Auction • Timed Online December 14 - 21, 2021 For: Steffes Truck & Transportation Auction • Timed Online December 14 - 21, 2021 For: Mulit-Party Construction Equipment Auction

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Online Fri., December 3, 2021 For: Online & Absentee Bidding Only WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., December 11, 2021 For: Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Findlay, OH Thurs., December 9, 2021 For: Unreserved Public Auction • Kissimmee, FL February 16 – 19, 2022 For: Annual Florida Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 71

ONLINE AUCTION

Page 72 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SURPLUS TO CONTINUING OPERATIONS

D&D POWER

4818 SINCLAIR ROAD in SAN ANTONIO, TEXAS 78222

TIMED, ONLINE ONLY AUCTION - BIDDING CLOSES:

WEDNESDAY, DECEMBER 8th at 11 AM CT Inspection: Day prior to auction from 9AM - 4PM

WELL-MAINTAINED RENTAL EQUIPMENT IN GOOD WORKING ORDER (30) 2013 - 2016 HIPOWER & MMD G E N E R AT O R S - ( 8 ) 2 3 0 k VA N a t u r a l Gas/LPG - Parallel, (9) 230 kVA Natural Gas/LPG, (10) 165 kVA Natural Gas/LPG Parallel, (3) 100 kVA Diesel (14) 2014 i-LINE Genset Panels, 600 AMP • (2) 2015 i-LINE Mini Panels, 400 AMP • (2) 2015 Air Compressors, 23.5 CFM • (1) 2015 LED Light Tower, 8 kW • (100) Cable Ramps • New Filters & Parts

18% Buyer's Premium with Proxibid.com | TX Auction Lic. # - Thomas C. Bowling - 18407 see MyronBowling.com for complete details | NO ON-SITE BIDDING

513/738-3311 | MyronBowling.com

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

SEE YOUR BARGAIN AD IN COLOR.

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 24-25 EB

ONLY $60 EXTRA FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 73

Page 74 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT....................................................................2 ACTIVE HEAVY DUTY COOLING..................................................18 AFE ...................................................................................................2 ALEX LYON & SON AUCTIONEERS LAS VEGAS NV 12/11/2021 ..................................................72 SPIRIT LAKE IA 12/7/2021 FORT WORTH TX 12/9/2021 ...71 ASTEC/CARLSON PAVING PRODUCTS ......................................41 ASTEC/ROADTEC ..........................................................................35 ASV ...........................................................................................28,29 AUCTION BLOCK ...........................................................................68 BARGAINS ......................................................................................72 BELL TRUCKS AMERICA INC .......................................................23 BOMAG AMERICAS INC ................................................................34 CALVIN GROUP INC ......................................................................14 CEG SCALE MODELS....................................................................46 CONDUIT SEARCH GROUP............................................................6 CONSTRUCTION EQUIPMENT GUIDE.........................26,62,66,73 DIAMOND A EQUIPMENT..............................................................19 DYNAPAC...................................................................................38,39 ECCO EQUIPMENT........................................................................17 FELLING TRAILERS .......................................................................53 FLANGE LOCK................................................................................12 HENDRIX MACHINERY LLC ............................................................3 HISTORICAL CONSTRUCTION EQUIPMENT ASSOCIATION ......2 HITACHI CONSTRUCTION MACHINERY ...............................48,49 HYUNDAI CONSTRUCTION EQUIPMENT ..............................24,25 IEDA.................................................................................................13 IRON BOUND AUCTIONS..............................................................68 JAMES G MURPHY CO KENMORE HEAVY EQUIPMENT AUCTION 12/2/2021.......69 JCB INC ...........................................................................................47 JFW EQUIPMENT INC ...................................................................40 JJ SCHECKEL CORP .......................................................................5 JOHN DEERE..................................................................................22 JOHN DEERE SKID STEER...........................................................75 KIRBY-SMITH MACHINERY INC....................................................76 KOMATSU AMERICA CORP ..........................................................45 LEEBOY...........................................................................................37 LIUGONG CONSTRUCTION MACHINERY .................................63 MAULDIN PAVING PRODUCTS.....................................................32 MYRON BOWLING AUCTIONEERS INC SAN ANTONIO TX 12/8/2021 ONLINE ONLY.......................72

NATIONAL ATTACHMENTS ...........................................................26 NIECE EQUIPMENT .......................................................................15 NPK CONSTRUCTION EQUIPMENT INC .....................................11 ROAD BUILDERS MACHINERY & SUPPLY ...................................7 SAKAI AMERICA INC......................................................................43 SANY AMERICA INC.........................................................................9 SIDUMP’R........................................................................................57 SMITHCO ........................................................................................61 TAKEUCHI ..................................................................................64,65 THUNDER CREEK..........................................................................18 TORO...............................................................................................50 TROPHY TRACTOR .......................................................................16 VANTAGE AUCTIONS ....................................................................68 VOLVO COMPACTION ...................................................................42 VOLVO CONSTRUCTION EQUIPMENT-NA ............................26,27 WACKER NEUSON ........................................................................21 WAINROY ........................................................................................30 WEILER PRODUCTS......................................................................36 WIRTGEN AMERICA ......................................................................33 YANMAR AMERICA CORP.............................................................10 CALIFORNIA SUPPLEMENT BAR NONE AUCTION.......................................................................1 CALIFORNIA CAT GROUP...............................................................3 GARTON TRACTOR INC..................................................................9 JCB CALIFORNIA ...........................................................................12 MEGA MACHINERY CO .................................................................11 PIRTEK CALIFORNIA .......................................................................5 SCOTT EQUIPMENT - FONTANA ...................................................2 SOUTHERN CALIFORNIA CONTRACTORS.................................11 VOLVO CONST EQUIP & SVCS...................................................6,7 WESTERN RENTALS .....................................................................11 PACIFIC NORTHWEST SUPPLEMENT CONSTRUCTION EQUIPMENT GUIDE ........................................11 JET CITY EQUIPMENT.....................................................................5 MODERN MACHINERY....................................................................2 ORION EQUIPMENT ......................................................................12 PACWEST MACHINERY ..................................................................3 PAPE MACHINERY...........................................................................7 TRIAD MACHINERY .......................................................................10

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 21, 2021 • Page 75

TOUGH TASKS SEEM SMALL FROM HERE. The G-Series Skid Steers and Compact Track Loader are majorly tough customers, because tough customers like you helped design them. With your input, we were able to push the limits of durability, engine power, and fuel capacity in all the ways our customers need. And with fewer grease zerks and extended oil-change intervals compared to earlier models, servicing is even simpler than before. Available in three models, including a radial-lift machine, the G-Series can take down the biggest jobs — and your operating costs — all at the same time. To learn more, call or visit us today.

4RIVERS EQUIPMENT

YELLOWHOUSE MACHINERY

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.4riversequipment.com

www.yhmc.com

www.honnen.com

www.doggett.com

Colorado Springs, CO 719.475.1100 Frederick, CO 303.833.5900 Albuquerque, NM 505.884.2900 Farmington, NM 505.326.1101 Hobbs, NM 575.392.6923 El Paso, TX 915.598.1133

Broken Bow, OK 580-584-3222 Enid, OK 580-233-5000 Tulsa, OK 918-245-5926 McAlester, OK 918-423-2555

Amarillo, TX 806-335-1681 Dalhart, TX 806-884-4994 Lubbock, TX 806-748-4700 Abilene, TX 325-677-2291 Midland/Odessa, TX 432-580-3337 San Angelo, TX 325-651-3337

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001

Victoria, TX 361-570-6666

Lufkin, TX 936-634-8801

Alexandria, LA 318-442-0455

Monroe, LA 318-343-8787

Baton Rouge, LA 225-291-3750

Shreveport, LA 318-631-3090

Broussard, LA 337-837-9481

St. Rose, LA 504-466-5577

Covington, LA 985-893-3005

Tyler, TX 903-592-8900

Longview, TX 903-758-3326

Page 76 • November 21, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2017 Komatsu PC490LC-11 2015 Wirtgen WR200 XLI

2018 KOMATSU D61EXI-24 KM18431X 3,235 hrs.

KM17155M $269,500 3,189 hrs.

WR15021 $357,500 1,950 hrs.

2006 Komatsu WA200-5L

2017 Komatsu D85EX-18

2014 Komatsu D39PX-23

2012 Komatsu PC360LC10

KM06305U $61,500 8,343 hrs.

KM16523M $399,500 2,059 hrs.

KM14199X

$117,500 2,972 hrs.

KM12252D $118,500 6,700 hrs.

2013 KOMATSU D65EX-17

2006 Komatsu WA200-5L

2016 KOMATSU WA270-7

2016 Komatsu PC240LC-11

2017 Deere 644K

KM13113X $129,150 5,669 hrs.

KM06305U $61,500 8,343 hrs.

KM16471M $107,500 2600 hrs.

KM16519X $157,500 3,383hrs.

$109,250 7,109 hrs.

2008 Caterpillar 963D

2018 Komatsu D65EX-18

2017 John Deere 310LEP

2014 LeeBoy 8510C

CT08803X $139,500 7,139 hrs.

KM18352X $209,500 3,600 hrs.

JD17004J $79,500 1,550 hrs.

LB14006X $79,500 2,219 hrs.

$249,500

2015 Komatsu PC138USLC-10 KM15152X 4,400 hrs.

$109,500

JD17003X

2015 Komatsu HM400-5 KM15268M 10,500 hrs.

$459,500

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • McAlester • Odessa • Waco • Oklahoma City • St. Louis • Tulsa

Contact Terry Lyness for details and pricing.

877.549.7501