Western 22, October 25, 2020 by Construction Equipment Guide

$3.00

Published Nationally ®

Western Edition

October 25 2020 Vol. IX • No. 22

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Demolition of Molson Coors Coming Soon...8

Paving Best Practices on Display at Speedway...18

Dallas-to-Houston Rail Comes Closer to Reality After receiving federal approval, Texas Central LLC expects to start construction of the high-speed rail connecting Dallas and Houston in 90 minutes in the first half of 2021. The project is expected to take up to six years and cost around $20 billion. The Federal Railroad Administration approved the plans in September, according to Texas Central Railroad. The Webuild Group and its U.S. subsidiary and joint-venture partner Lane Construction are a step closer to starting work on a highspeed railway after the publication of two federal decisions on the historic project that will bring a major boost to the economy and create thousands of jobs. Texas Central LLC awarded the designbuild contract for the early part of construction to Webuild and Lane in September 2019. Texas Central received the Rule of Particular Applicability (RPA) from the U.S.

Texas Central photo

Department of Transportation’s Federal Railroad Administration that sets the safety requirements for the railway’s signal and trainset control, track rolling stock, operating rules and practices, system qualifications and maintenance. It also received the Record of Decision (RoD), completing the environmen-

tal review process and confirming the alignment that the railway will follow between Dallas and Houston. “This latest achievement, with these two decisions, brings us a step closer to the start of construction on the new railway,” said see RAIL page 46

RK Hall Relies on Cat Equipment for U.S. 82 Job Jeff Martin Auctioneers Announce Next Sale...52

RK Hall serves as the general contractor covering approximately 17.8 mi. of construction along U.S. 82 that includes expanding and widening the highway in Red River County.

See story on page 16.

Table of Contents................4 Paving Section..............18-29 Crawler Loaders, Dozers Section..........................30-37 Business Calendar ............48 Auction Section............51-55 Advertisers Index..............54

Page 2 â€˘ October 25, 2020 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

(3) 2012 PTH2500 Rock Crushers 98â€? Working Width, 0 Hours, New Inventory

On ALL A NEW John Deere Construction & Compact ompact Construction n Equipment!

Stock Numbers: B15817, B16545, B15816

Sale Price: $90,500 Contact: Doug Shipp (406) 672-6880 1835 Harnish Boulevard â€˘ Billings, MT 59101

A Higher Leveel of Protec e tion

Step-up the safety on your skid steer with a UL752 Level 1 ballistic door better known as the Defender Ballistic Door. Whethe er you are operating a hammer, auger ger, mower, mulcher, or a log processor you can feel secure in n knowing there is a 3/4â€? bullet resiistant door in place, to help protect your BIGGEST ASSET â€“ YOU! Our products fit Bobcat, Caterrpillar, Kubota, and Komatsu.

2Î? Î?HHU YDOLG RQ TXDOLI\ LII\\LLQJ SXUFKDVHV PDGH EHWZHHQ -XOO\\ 2FWREHU 2Î? Î?HHU LQFOXGHV DOO QHZ -RKQ 'HHUH &RQVWUXFWLRQ DQG &RPSDFW &RQVWUXFWLRQ (TXLLS SPHQW 6XE EMMHFW WR DSSURYHG LQVWDOOPHQW FUHGLW ZLWK -RKQ 'HHUH ))LLQDQFLDO )RU FRPPHUFLDO XVH RQO\\ 'RZQ SD\\P PHQW PD D\\ EH UHTXLUHG 'RZQ $35 LLVV IIR RU PRQWWK KV RQO\\ 77D D[HVV IIUUHLJ JK KWW VHWXS DQG GHOLYHUU\\ FKDUUJ JHV FRXOG LQFUHDVH PRQWWK KOO\\ SD D\\PHQW 6RPH UHVWULFWLRQV DSSO\\ RWKHU VVS SHFLDO UDWHV DQG WHUPV PD D\\ EH DYDLODEOH VR VHH \RXU GHDOHU IIR RU GHWDLOOVV DQG RWKHU Č´QDQFLQJ RSWWLLRQV $YDLODEOH DW SDUWLFLLS SDWLQJ 8 6 GHDOHUUVV 3ULFHV DQG PRGHOOVV PD D\\ YDUU\\ E E\\ GHDOHU

Defender Ballistic Door for Skid Steers

Defender Balllistic Window for Excavator

Made by contractors, for contractors c

208-304-0002 Visit us @ Hearmorr.com

Skeleton Front Door for Skid Steers

Bolt-on Window Screen for Excavator

hea avy equipment

Armor A PRO OTECTION YO OTECTION OU CAN COUNT COUNT ON!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 3

"In Business for over 33 Years" www.hendrixmachineryllc.com 2019 Sullair 185D, Stk#: 12049, New, 390 hrs., 185CFM @ 100 PSIG, 2700 RPM, 125 PSI, ST226 Tires, 3 Cyl. Kubota Eng. ............$17,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2014 Volvo SD115, Stk#: 11874, 84" Smooth Español Drum, 1,251 hrs., 23.1x26 Tires, 4 Cyl. Volvo Eng ..............................................................$56,500

2018 Terex TLB840R, Stk#: 11556, OROPS, 2013 Cat D6T LGP, Stk#: 12411, EROPS, A/C & 4WD, New, 672 hrs., 24" Bucket, Ext-Hoe, Pilot Heat, Sweeps, Rear Screen, St./Tilt Blade, 4,717 Controls, 12x16.5 Front Tires, 500x70x24 Rear hrs., 36" Pads, PA56 Winch, 12' 5" Wide $129,500 Tires, 4 Cyl. Deutz Eng...........................$36,500

2018 Volvo EC250E LR, Stk#: 12298, EROPS, 2014 Bomag BW211D-50, Stk#: 12219, 84" A/C & Heat, AM/FM Radio, 2,025 hrs., 95% U/C, 2014 Cat 316EL, Stk#: 12386, EROPS, A/C & Heat, AM/FM Radio, 4,051 Hrs., 18" Bucket, 10' Smooth Drum, 2,169 hrs., 23.1x26 Tires @ 50%, 60" Bucket, 25 1/2 Stick, Back-Up & Side Camera Deutz Eng...............................................$59,500 ............................................................$129,500 4" Sticks, 28" Pads, Aux. Hyd., 90% U/C$76,500

2012 SullAir 185CFM, Stk#: 12339, 2,772 hrs., 185CFM, 175/80Rx13 Tires, 2" Ball Hitch, 4 Cyl. JD Eng ....................................................$7,500

2006 Broderson IC80-3G, Stk#: 12436, 18,000 lbs., 46 ft., 2,904 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires................................$16,500

2010 Daewoo G25E-3, Stk#: 12047, 6,000 lbs., 15 ft., 4,388 hrs., 40" Forks, 48" Frame, 3 Stage Mast, 7.00x15 Front Tires, 6.50x10 Rear Tires, Propane, wt 9,568 lbs. ............................$9,500

2016 Cat D4K2 LGP, Stk#: 12470, OROPS, 2013 JLG /Skytrak 10054, Stk#: 11916, 10,000 2016 Gehl R260, Stk#: 12092, OROPS, 576 hrs., 2015 Cat 323FL, Stk#: 12366, EROPS, A/C & Sweeps, Rear & Sides Screens, 6 Way Blade, lbs., 54 ft., 7,247 hrs., 60" Forks, 74" Frame, Heat, AM/FM Radio, 3,989 hrs., 50" Bucket, 31" 400x75x28 Foam Filled Tires, 4 Cyl. Cummins Eng 4,619 hrs., 24" Pads, 80% U/C, 9' 4" Wide .......... 6 ft. Bucket, Aux. Hyd., 14x17.5 Tires, 4 Cyl. ..................................................................$38,500 ..............................................................$59,500 YanMar Eng ..........................................$22,500 Pads, 95% U/C, Aux. Hyd. ....................$99,500

2014 John Deere 450J, Stk#: 12400, OROPS, 6 2014 Cat 329EL, Stk#: 12210, EROPS, A/C & Way Blade, 3,840 hrs., 24" Pads, 80% U/C, 9' Heat, FM Radio, 4,768 hrs., 36" Bucket w/Hyd. 10" Wide ................................................$46,500 Thumb, Aux. Hyd., 30" Pads, 9' 6" Stick $96,500

2018 Linkbelt 80X3, Stk#: 12422, EROPS, A/C, 2016 Cat 304E 2CR, Stk#: 12477, OROPS, 1,266 hrs., Front Blade, 22" Bucket, 7' 6" Arm, 18 1,801 hrs., 11" Bucket, 4 Way Blade, 14" Pads, 2009 Broderson IC80-2H, Stk#: 12456, 18,000 " Rubber Tracks, Aux Hyd., Isuzu Eng., 7' 7" Wide 5' 5" Stick, Aux. Hyd., 4 Cyl. Cat Eng., 6' 5" Wide lbs., 46 ft., 1,345 hrs., 10 ft. JIB, 4WD, 4WS, 69 ..............................................................$72,500 ..............................................................$32,500 hp., 10.00Rx15 Tires................................$21,500

2018 Kobelco SK75SR3, Stk#: 12313, EROPS, A/C, 1,224 hrs., 24" Bucket, 8 ft. Push Blade, 18" Rubber Tracks........................................$66,500

2016 Cat 299D2, Stk#: 12415, EROPS, A/C & Heat, 2,046 hrs., Radio, 8ft. Bucket, 2 Speed, Aux. Hyd., 18" Rubber Tracks, Hyd Quick Coupler, Cat. Eng ................................................$46,500

2015 Doosan G25E5, Stk#: 12280, 15ft., 1,559 Hrs., 40" Forks, 3 Stage Mast, 7.00x15x5.50 Front Tires, 6.50x10 Rear Tires, Duel Fuel Propane/Gas ..........................................$19,500

2016 Cat 279D, Stk#: 12416, EROPS, A/C & Heat, 1,266 hrs., 80" Bucket, Electric Quick Coupler, Aux. Hyd., 18" Rubber Traks, 4 Cyl. Cat Eng ........................................................$42,500

2018 Cat 323FL, Stk#: 12314, EROPS, A/C & Heat, AM/FM Radio, 1,730 hrs., 42" Bucket, 36" Pads, Aux. Hyd ......................................$146,500

2014 Hyundai 160D-7E, Stk#: 12174, EROPS, A/C & Heat, 35,274 lbs. Lift, 13 ft., 7,398 hrs., Rear Camera, Side Shift Carriage, 12.00x20 NHS 2008 Broderson IC80-2G, Stk#: 12438, 18,000 lbs., 46 ft. 1,294 hrs., 10 ft. JIB, 4WD, 4WS, 69 Tires @ 80%, Cummins QSB 6.7 Eng., wt. 43,265 lbs..............................................$79,500 hp., 10.00Rx15 Tires ............................$19,500

2011 Volvo A25E, Stk#: 11745, EROPS, A/C & Heat, 6WD, 10,864 hrs. 25 Ton Cap., 23.5Rx25 Tires ......................................................$76,500

2019 Cat 906M, Stk#: 12420, EROPS, Like New, A/C & Heat, Radio, 185 hrs., 74 hp, Aux. Hyd., 2013 Superior DT80C, Stk#: 12089, EROPS, 3rd Valve Hyd., Ride Control, 1.2 Yard Bucket (6 2010 JLG 600AJ, Stk#: 12136, 500 lbs., 60 ft., 5 hrs., 8 ft. Broom, P235/75Rx15 Tires, 4 Way ft.) w/Edge, 340/80Rx18 Radial Rubber Tires, Cat 2,912 hrs., 355x55Dx625 Tires, 4 Cyl. Deutz Eng. 2012 JLG 400S, Stk#: 12161, 500 lbs., 40 ft., Broom, Water System............................$19,500 C3, Tier 4F Diesel Eng............................$79,500 ..............................................................$29,500 3,296 hrs., Foam Filled Tires @ 75% ......$26,500

2012 Laymor SM300, Stk#: 12093, 813 hrs., 8 ft. Broom, 3 Wheel, ST205x75Rx14 Tires, 4 Cyl. Kubota Eng...............................................$14,500

2013 JLG G12-55A, Stk#: 11883, EROPS, 12,000 lbs., 55 ft., 6,362 hrs., 48" Forks, 52" Frame, 4WD, 400/75- 28 Tires, 4 Cyl. Cummins Eng.........................................................$46,500

2013 Atlas Copco QAS90, Stk#: 12088, 6,135 hrs., ST205x75Rx15 Tires, JD Eng. ........$19,500

2012 Skytrak 10054, Stk#: 11990, 10,000 lbs., 2014 Cat 336EL, Stk#: 12421, EROPS, A/C & 54 ft., 7,019 hrs., 60" Forks, 74" Frame, Aux. Heat, 4,438 hrs., 47" Bucket, 10' 6" Stick, 21' 4" Hyd., 400x75x28 Foam Filled Tires, Hyd. Self Leveling System, 4 Cyl. Cummins Eng. $38,500 Boom, 34" Pads, 80% U/C ..................$129,500

2000 Cat 924F, Stk#: 12113, OROPS, 6,423 hrs., 94" Bucket, 17.5x25 Tires..............$22,500

Page 4 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

WESTERN EDITION

DEMOLITION OF MOLSON COORS

COMING SOON IN COLORADO

As part of its corporate farewell to Denver, Molson Coors Beverage Co. vowed last fall to invest hundreds of millions of dollars in the company’s brewing plant in Golden, Colo. Now the scope of that work is coming into focus, and heavy machinery is on the horizon in Jefferson County.

NEW MEXICO UTILITY UNVEILS SOLAR

ARRAY TO POWER FACEBOOK

The largest electric provider in New Mexico has unveiled its latest solar array, a 50-megawatt facility that was built to power Facebook's Los Lunas Data Center with renewable energy. A virtual ribbon cutting ceremony was held on Oct. 7 for the Encino Solar Field, located in Sandoval County west of Rio Rancho.

HOLT VENTURES CONTINUES

INNOVATION WITH AI PLATFORM

TEREX APPOINTS MOZEY AS ITS NEW

REGIONAL SALES MANAGER

Corey Mozey has been appointed regional sales manager — Terex rough terrain cranes and Franna Pick & Carry Cranes based in Colorado. Mozey will assume responsibility for the existing distribution partners in the western states and at the same time seek to appoint new ones where required.

LIEBHERR USA ADDS KLEMOLA AS

MANAGER OF MINING SALES

Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com Advertising e-mail production@cegltd.com

Mobile

Facebook

Twitter

AED GETS APPROVAL TO OVERSEE APPRENTICESHIP PROGRAMS

CONCOURS CLUB SHOWS IMPORTANCE OF SPEEDWAY PAVING

Building a speedway has its own unique set of challenges that make it different from construction jobs on an interstate or state highway. The smoothness of the track is vitally important. A slight bump can create problems for an expensive car hugging the road at high speed.

WORLD OF CONCRETE ANNOUNCES NEW SHOW DATES FOR JUNE 2021

After discussions with key stakeholders and feedback from industry-leading concrete and masonry associations, World of Concrete made the proactive decision to reschedule WOC 2021 from January to June. World of Concrete will adapt the Informa AllSecure Plan.

THUNDER CREEK ADDS LEA AS SALES VICE PRESIDENT

Thunder Creek Equipment and its parent company, LDJ Manufacturing, have hired Larry Lea, former director of sales of Mahindra USA, as the organization’s new vice president of sales. Lea will manage the organization’s decentralized national sales team.

JEFF MARTIN AUCTIONEERS HEADS BACK TO FLORIDA

Jeff Martin Auctioneers Inc. is headed back to the Kissimmee, Fla., auctions for its fourth year, selling from its auction trucks on Feb. 8 to 11, 2021. The auction features heavy construction and farm equipment, trucks, trailers, cranes, vehicles, attachments, support equipment and more.

32 34 36

CRAWLER LOADERS, DOZERS SECTION

CEG’S 2020 CRAWLER LOADER, DOZERS COMPARISON CHART DEERE 700L, 750L DOZERS ENHANCE PRODUCTIVITY, COMFORT

KOMATSU D155PX-8 LGP DOZER IDEAL FOR MANY APPLICATIONS

DEPARTMENTS

48 51

BUSINESS CALENDAR COMING AUCTIONS

EQUIPMENT

22 22

BOMAG 2200/60 Cold Planer WACKER NEUSON

Rammers, Plates, Backpack Vibrator

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

YouTube

Dennis Hogeboom

Kent Hogeboom

Patrick Kiel

• Colorado • Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Idaho • Montana • Oregon • Washington • Wyoming

Cell e-mail

602/679-8759 dennishogeboom@cegltd.com

315/866-1423 518/221-5159 khogeboom@cegltd.com

952/353-1770 612/481-8557 Cell e-mail pkiel@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 5

2020 International CU515 4x4, 66.6L DSL, A/T, A/C, C/C, 19,500GVW, Versalift SST-40-E1H, 45', PW, PDL, PM, Sync, Stk #: 20B0162 ...$117,900

2020 Ford F550 6.7L, A/C, C/C, 19,500GVW, Versalift VST50TN, 55',PW, PD, PM, Sync, Stk #: 20B0175 ...$123,900

2020 Dodge 5500 4x4, 6.7L, A/T, A/C, C/C, 19,500GVW, Versalift SST-40-E1H, 45', PW, PDL, PM, SYNC, 28 mi, Stk #: 20B0161 ...$114,900

2019 Ford F450 V10 Gas, A/T, A/C, C/C, 16,000GVW, Versalift SST36NE, 41', PW, PM, PL SYNC, 19 mi, Stk #: 19B0040 ...$88,900

2013 Freightliner Cascadia 6x4, DD13, 435HP, FR015210C 10SPD, A/C, C/C, 52,000GVW, PW, PM w NEW Roll Off, 336,613 mi, Stk #: 13V9350 ...$75,900

2014 Freightliner M2 Cummins ISB 6.7L, 220HP, Allison 2200RDS A/T, A/C, 26,000GVW, NEW Dump Body, 135,081 mi, Stk #: 14V0013 ...$67,500

2013 Freightliner M211242S DD13, 350HP, FR013210 10spd, A/C, C/C, 33,000GVW, PW, PL, PM *NEW Hard Ox 450 10FT5yd Dump w/ tow pkg, 167,249 mi, Stk #: 13V9396 ...$67900

2014 Freightliner M2 Cummins ISB 6.7L, 220HP, Allison 2200RDS A/T, A/C, C/C, 26,000GVW, 16’L, Contractor 16’ Dump, 162,992 mi, Stk #: 14V0034 ...$67,500

2013 International 7300 Digger, 4X4, A/C, C/C, 33,000GVW, Altec DM47B-TR, 47 Sheave Height, 51,105 mi, Stk #: 13D0083 ...$59,900

2012 Freightliner 12564ST 6x4, DD13, 435HP, FR015210C 10SPD, A/C, C/C, 52,000GVW, w/ NEW 4000 Gal Water Tank, 241,272 mi, Stk #: 12V9228 ...$79,900

2013 FREIGHTLINER M2106 6.7L Cummins, 220HP, Allison 2200RDS A/T, A/C, C/C, 26,000GVW, Water Truck 2000 Gal, 6 Nozzels, Will Draft,, 180,039 mi, Stk #: 13V9262C ...$59,900

2014 International 4300 MAXX Force DT, 215HP, Allison A/T, A/C, C/C, 25,999GVW, *w/ NEW 2,000 gal water tank, hose reel & 5 air valve spray heads, 158,545 mi, Stk #: 14V9056 ...$53,900

2015 Ford F550 6.7L, A/T, A/C, C/C, 19,500GVW, Stellar Crane 5521, 5000lb Cap. Miller Welder/Generator Blue Star 185, Compressor, 167,269 mi, Stk #: 15V0121 ...$67,900

2015 Freightliner M2 Cummins 6.7L, 220HP, Allison 2200RDS A/T, A/C, C/C, 26,000GVW, w/ NEW 18’ Debris Dump, 156,179 mi, Stk #: 15V0017 ...$67,900

2014 International Durastar 4300 MAXX Force DT, 215HP, Allison Auto, A/C, C/C, 25,999GVW, New 18ft Debris Dump w/ Crows Nest, 138,231 mi, Stk #: 14V9057 ...$59,900

2012 Volvo VNL64T300 6x4, D13, 425HP, FR015210C 10SPD, A/C, C/C, 52,000GVW, 22’L, PW, PL, PM *NEW 22FT Flatbed & hitch, 269,095 mi, Stk #: 12V9253 ...$69,900

2021 Dorsey DF53BTR, 80,000GVW, Axle, 38’L, 8’6”W, Drop Deck, Overall 53’, Upperdeck 10’6”, Lower Deck 38’1”, Steel Smooth Plate & Traction Bars, Decking 1-1/8” Apitong, Stk #: 21T0094 ...$33,750 +FET

2021 Dorsey TA20, 47,900GVW, Tagalong 20 ton Capacity, Overall Length-35’, Width-8’6”, Deck Length-24’, Apitong 1-1/2” Deck Flooring, Aluminum Wheels, LED Lights,Hydraulic Ramps, Stk #: 21T0092 ...$26,750 +FET

2021 Dorsey TA10, 25,950GVW Tagalong, Capacity 10 ton, Overall Length 34’, Width 8’, Deck Length 24’, Deck Height 33”, Apitong Flooring 1-1/2”, Loading Ramp Spring Assisted, Stk #: 21T0096 ...$18,900

2021 Dorsey TA10, 25,950GVW, Tagalong, Capacity 10 ton, Overall Length 36’, Width 8’, Deck Length 26’, Deck Height 33”, Apitong Flooring 1-1/2”, Loading Ramp Spring Assisted, Stk #: 21T0098 ...$19,950

Page 6 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 7

www.mustangcat.com Lufkin 936-632-6775 Bryan 979-775-7368 Nederland 409-722-7368 Channelview 281-452-7368 Houston, Bingle 713-838-7368 Houston, SW 713-838-7368 Freeport 979-233-7368 Conroe 936-788-7368

Page 8 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Demolition of Molson Coors Coming Soon in Colorado DENVER (AP) As part of its corporate farewell to Denver, Molson Coors Beverage Co. vowed last fall to invest hundreds of millions of dollars in the company’s brewing plant in Golden, Colo., the second-largest beer-making facility in the world. Now the scope of that work is coming into focus, and heavy machinery is on the horizon in Jefferson County. “Demolition activities will be starting relatively quickly,” Peter J. Coors, son of Molson Coors vice chairman and longtime face of Coors Brewing Pete Coors, told The Denver Post. The younger Coors has been named the director of the G150 project, a name taken from the impending 150-year anniversary of family patriarch Adolph Coors launching a brewing company in Golden with fellow Prussian immigrant Jacob Schueler in 1873. G150, scheduled to stretch into 2024, will completely overhaul the infrastructure between the company’s Golden brewhouse and the packaging facility at the massive plant. New, more-efficient fermenting, aging and filtration facilities will be built. The socalled “government cellars” where beer is stored prior to packaging will also be replaced with a state-of-the-art upgrade, Coors said. That building dates back to the 1950s. “Obviously, we have made capital improvements over the course of the last 50, 60 years, but all of those buildings were of that vintage,” he said. “It means a lot that Molson Coors is putting the money into the Golden brewery to set us up going forward.” The existing fermenting, filtering and storage facilities aren’t being removed as part of the work, Coors said. Instead, they will be abandoned in place. The new tank farms coming as part of the project will be replacing surface parking lots and ponds on

corporate future. For now, the Golden brewery’s upgrade is set up so that it will continue only to produce beers like Coors Banquet Beer, Miller Genuine Lite, Blue Moon Belgian White and 22 other well-known brands, but it will have the capability to be retrofitted to make hard seltzers, Coors said. “Things like Coors seltzer, that technology is not part of this project but it will enable us to add that capability in the future,” Coors said. The plant can make between 11 and 12 million barrels of beer a year, a cap brought Heavy machinery is on the horizon in Jefferson County as demolition activities will on by the capacity of its packaging operabegin relatively quickly, according to Peter J. Coors, son of Molson Coors vice chairman. tion. That will not change after the overhaul is done, Coors said. As for what new, more the property. about the importance of this property, the efficient infrastructure will mean for the The big-time public commitment to importance of Golden and Jefferson County hundreds of people who work in the fabled Coors Brewing’s birthplace, production epi- to our family and to our company,” he said. plant, Coors said that hasn’t come up in center and symbolic home was made as the New facilities will mean much greater internal discussions. parent company, the now-named Molson efficiency, Peter J. Coors said, something he “We have not talked about what labor Coors Beverage Co. was preparing to pull up expects to benefit the business and the envi- needs are going to be going forward even stakes in Denver — and move or eliminate ronment. When it’s all said and done, G150 internally,” Coors said. 300 jobs — and relocate headquarters to should mean 25 percent less beer waste and While the project is underway, Coors Chicago. 15 percent less energy usage on an annual expects between 450 to 500 construction The Coors family was notably absent basis. Water usage at the plant should workers to be on site just about every day. from news releases about the relocation and decrease by 100 million gallons per year. The company has picked Jacksonville, Fla.refused to say much about it in the aftermath. Golden Mayor Laura Weinberg lauded based Haskell as its general contractor, but Peter J. Coors declined to put an exact price the focus on reducing energy and water expects to find most of the subcontractors tag on the project he is leading, sticking with usage at the plant through the project. and materials in state, he said. the “hundreds of millions” figure on the “The city of Golden is committed to a susThat influx of jobs, workers and the record since last year, but he said this work tainable future and its wonderful to know money they are expected to spend in the area should set up the Golden plant, workplace that Molson Coors has that same commit- while on the projects stands to make a big for about 800 of Molson Coors’ 1,600 ment as well,” she said at the groundbreak- impact on Golden and Jefferson County Golden-area employees, for “generations to ing. businesses, particularly after a year in which come.” A big reason Molson Coors relocated to the COVID-19 pandemic has battered those The elder Pete Coors appeared at the Chicago was more abundant marketing tal- businesses and taxes revenues. groundbreaking ceremony. He reflected ent there compared to Colorado, professionPeter J. Coors said the project timing wasback to a time where his childhood home als who specialize in developing new prod- n’t influenced by the pandemic. The Golden stood where the company’s industrial brew- ucts. As reflected by the “beverage compa- brewery was in need of an upgrade. The ing buildings are today. ny” portion of its name, Molson Coors is company decided to invest in new infra“(I have) special thoughts in my mind looking beyond beer when it comes to its structure rather than bolstering old assets. 

New Mexico Utility Unveils 50-MW Solar Facility to Power Facebook RIO RANCHO, N.M. (AP) The largest electric provider in New Mexico has unveiled its latest solar array, a 50-megawatt facility that was built to power Facebook’s Los Lunas Data Center with renewable energy. A virtual ribbon-cutting ceremony was held on Oct. 7 for the Encino Solar Field, located in Sandoval County, N.M., west of Rio Rancho. Public Service Co. of New Mexico and New Mexico Renewable Development LLC entered an agreement last year to build the solar array to provide electricity for Facebook’s data center near Los Lunas.

Construction of the solar plant included around 180,000 solar modules. The utility said it’s committed to its goal of providing emissions-free electricity to customers over the next two decades. Facebook has committed to support its operations with 100 percent renewable energy beginning this year. With the Encino solar array, the utility said its ownership and power purchase agreements equal 287 megawatts of solar and more than 350 megawatts of wind. Additional renewable resources are expected to come online over the next few years. 

A virtual ribbon-cutting ceremony was held on Oct. 7 for the Encino Solar Field, located in Sandoval County, N.M., west of Rio Rancho.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 9

NPK Welcomes

NEW DEALER Oregon & Washington: Triad Machinery

Page 10 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HOLT Ventures Continues Innovation With AI Platform

Adam Handfinger

Joshua Levy

HOLT Ventures, the venture capital arm of HOLT CAT, announced its investment in Document Crunch, an artificial intelligence platform designed specifically for the construction industry. Created by a team with more than 30 years of combined experience in construction law and risk management, Document Crunch enables users to review complex project documents, including contracts, specifications and insurance policies quickly and easily, identifying a curated list of key provisions and providing sample language, insights and rationale, according to the company. “Document Crunch is the first artificial intelligence tool in the construction industry that provides transparency regarding what we believe are the critical risks in important

project documents,” explained Co-Founder and Curator Joshua Levy. “Not only does this save time and money, it helps users identify and contextualize potentially catastrophic issues.” The Document Crunch platform allows users to upload documents on a case-by-case basis, with no minimum requirements, upfront costs or commitments. Within minutes, the artificial intelligence technology, with an algorithm that has been trained by construction industry experts, will identify a curated set of key provisions for the type of document uploaded and provide insight based on the type of provisions found, according to the company. This is critically important as it

Terex Appoints Mozey as Its New Regional Sales Manager Corey Mozey has been appointed to the position of regional sales manager — Terex rough terrain cranes and Franna Pick & Carry Cranes based in Colorado. Mozey will assume responsibility for the existing distribution partners in the western states and at the same time seek to appoint new ones where required. In addition, he also will focus on increasing the diverse

Corey Mozey

end customer base, with a clear focus on growing market share. Mozey brings a successful track record in sales having previously worked in Terex’s utilities business. The U.S. market is of significant strategic importance to Terex and the addition of Mozey further confirms this commitment to this market, according to the manufacturer. 

can help anyone in the construction industry better appreciate major risks that may have otherwise gone unrealized. “HOLT Ventures’ goal is to advance ideas and technologies that are disrupting the industry,” said Meg Paulus, HOLT Ventures partner. “The founders of Document Crunch have a long history in the industry and intimate knowledge of the issues their customers face, which is what makes the product so unique. When speaking to customers, it was evident that nothing like Document Crunch existed, and that it was greatly needed in the market.” Document Crunch recently was named the winner of the Industrial Grade Innovation Conference “Start-Up Battle.” Produced by The Association of Union Constructors (TAUC), the "Start-Up Battle" pits new construction technology firms against each other to pitch their products to a group of seasoned venture capitalists as well as various industry members. “It is exciting to see our idea turn into a solution now being used by the construction industry, and then have that solution get amazing accolades like the ‘Start-Up Battle’ win,” said Adam Handfinger, a Document Crunch co-founder and advisor. “Winning the challenge coincides with our new partnership with HOLT Ventures, which we are equally excited about. We can’t wait to see what the future holds for Document Crunch.” Document Crunch soft launched at the end of 2019, and with the investment from HOLT Ventures, is now in the growth stage, gaining traction throughout the construction

industry with users ranging from a number of leading contractors, to small and medium-sized construction companies across the country. “Many small- to mid-size companies don’t have inhouse lawyers or other risk management professionals, so reviewing long and complex contracts can be costly and time consuming,” explained Levy. “Builders want to build, and operators have no appetite for getting bogged down by all of the small print. Document Crunch unlocks subject matter expertise at a fraction of the cost and allows companies to reap the benefits of AI technology without investing significant time and resources into training their own contract/document review platform.” Construction technology continues to reshape the industry, increasing safety, productivity and profitability. The continued advancement in artificial intelligence and its application in the construction industry is among the newest technologies and tools that inspired HOLT to create HOLT Ventures, the company said. “Innovation was the driving force behind our own company’s evolution, and we are dedicated to supporting innovation for our customers and the industries we serve,” explained Peter J. Holt, CEO of HOLT CAT. The mission of HOLT Ventures is to optimize the service, manufacturing, rental and distribution businesses for the future while adapting to evolving customer demands. HOLT invests in early stage companies, building partnerships and piloting new technologies to help build and scale small business. For more information about HOLT Ventures, , visit holtventures.com. For more information about Document Crunch, visit documentcrunch.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 11

Page 12 â€¢ October 25, 2020 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

7TFI <NIJSJWX

2FYJWNFQ 9WFSXKJW ;JMNHQJX

10â€™ Commercial Pavers Ñ£ (TRRJWNHFQ 5F[JWX

<NYM T[JW ^JFWX TK J]UJWNJSHJ \J XUJHNFQN_J NS GZ^NSL FSI XJQQNSL ZXJI FXUMFQY UF[NSL JVZNURJSY

8â€™ Commercial Pavers Ñ£ (TRRJWNHFQ 5F[JWX

9FSIJR ;NGWFYTW^ 7TQQJWX

WEPIW$GEPZMRKVSYTMRG GSQ \\\ HFQ[NSLWTZUNSH HTR

&XUMFQY )NXYWNGZYTWX

(MNU 8UWJFIJWX

2NQQNSL 2FHMNSJX

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 13

RENTALS

HEAVY EQUIPMENT

Liebherr USA Adds Klemola as Manager of Mining Sales

Serving the Construction & Mining Industries Since 1962

Lincoln Klemola

Former Rental Units for Sale:

Liebherr USA Co. announced Lincoln Klemola as the new manager of field services of its mining sales division in the western United States. Klemola will oversee and manage customer support for Liebherr Mining machines in the United States. He will serve as the primary service contact for Liebherr Mining customers within the United States, lead the entire service and support team and expand on Liebherr’s current growth strategy for the U.S.market. Klemola has more than 20 years experience in the mining industry. Thoughout his career, he has held previous positions such as: technical trainer of large mining equipment; field service technician of large diesel electric mining equipment; and most recently service manager of a large industrial machinery and equipment distributor. His extensive experience and accomplishments encompasses all areas of the supplier business. From increasing profitability of diverse product lines, leading customer service teams and service technicians in service and repair of mining equipment, working with OEM’s and manufacturers to promote products, providing customer solutions, managing maintenance and repair contracts to development of a technician training program, according to Liebherr.

In addition, Lincoln holds certifications in several mobile equipment systems, is a MSHA Qualified Surface Mine Electrician and a member of the Mining Associates of Wyoming. “He is respected in the industry, a great talent for our mining group to attract, and a person that can help build on our strategy to grow the Liebherr Mining business,” said Shane Kuhlmey, divison director of Liebherr USA Co. Mining. “I am very excited to join Liebherr and am looking forward to meeting all of its great people,” said Klemola. “I chose a career with Liebherr because I believe in the vision LUS Mining Division has for growth and I believe in the products we have to offer. “As our business grows throughout the U.S., our service team will also have to grow. I look forward to recruiting talented technicians to Liebherr and building a strong diverse service team that will support our customers, sales staff and equipment groups. This will be an exciting challenge to keepup with equipment sales.” Klemola is based out of the Liebherr USA Co. western operations office for mining sales and service in Gillette, Wyo., and reports to Shane Kuhlmey, division director of mining. For more information, visit www.liebherr.com. 

2001 CAT 320CL, Ready to work, 24T HEX 1996 CAT 815F, Excellent, work ready 22 ton with reach boom, med stick, cab, AC, aux soil compactor with OROPS, S-Dozer w/ tilt, hyd. QC, 1000 hrs on new tracks ......$55,000 5200 hrs on rebuilt engine, 0hrs on newly rebuilt trans and 1200hrs on feet ....$149,000

2003 CAT D6R DS LGP, Excellent, series 2, LGP w/ cab, AC, 6S Dozer w/ tilt, drawbar, Almost new tracks w/ 50% 36" flat pads. Fully serviced and work ready ....................$79,000

1997 CAT D6R LGP, CAB, AC, 6S Dozer, 2003 CAT 330C, Work ready 40T HEX with DRAWBAR, 1200 hr on new UC w/ 36" FLAT reach boom, med stick, QC, GP Bucket, fully PADS, 2700 hr on engine rebuild. Runs great, serviced, Tier 2 engine ......................$69,000 former rental unit ..............................$65,000

2003 CAT 14H, Work ready, larger blade, fully equipped with cab, AC, pushblock, ripper, engine doors, 20.5-25 tires in good condition. 1 of 2 available ................................$149,000

1980 CAT 631D, 2000 hrs on CAT dealer re2012 TEREX TA300, Excellent, low hours, power 3408TA, T-2 engine, cab, AC, retarder, 30T 6x6 Artic with retarder, tailgate, backup 37.25x35 tires at 90%F, good rears. Excellent camera, supplemental steering, good tires. Work ready. One of two available ....$139,500 ..........................................................$99,000

2011 DEERE 544K, LOW Hours, cab, AC, QC with GP Bucket and Forks, in excellent condition, work ready ................................$82,500

(714) 340-1025 • Mike Kustura: sales@EccoEquipment.com

www.eccoheavyequipment.com

Santa Ana, CA – HQ (714) 554-4851

Visalia, CA (559) 651-0116

San Diego, CA (619) 205-2026

Coachella, CA (760) 578-1043

Sacramento, CA (916) 997-7492

Bullhead City, AZ (928) 715-0672

Riverside, CA (951) 276-9025

Stockton, CA (510) 516-5567

Phoenix, AZ (602) 276-2040

Las Vegas, NV (702) 877-4302

Salt Lake City, UT (801) 796-7368

Boise, ID (208) 459-3800

Williston, ND (701) 572-8126

Page 14 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.trophytractor.com Dozers - Crawler

2017 CATERPILLAR D10T2, 3456 Hrs ....................................$995,000 2011 CATERPILLAR D10T, 11,778 Hrs ....................................$575,000 1998 CATERPILLAR D10R ......................................................$125,000 (2) 1987/89 CATERPILLAR D10N ........................................$87,500 Ea. 2018 CATERPILLAR D9T ........................................................$805,000 1983 CATERPILLAR D9L................................................................$Call (2) 2012/18 CATERPILLAR D8T ....................................From $229,500 2004 CATERPILLAR D8R II ......................................................$125,000 (9) 2013-2019 CATERPILLAR D6T XW..........................From $145,500 (3) 2011/18 CATERPILLAR D6T XL ..............................From $109,500 2015 CATERPILLAR D6N XL, 3235 Hrs ..................................$164,500 2016 CATERPILLAR D6N LGP ................................................$139,500 (2) 2019/20 CATERPILLAR D6 LGP ..............................................$Call

Attachments

CATERPILLAR 740 BED ..............................................................$5,000

Asphalt / Pavers / Concrete Equipment

2014 CATERPILLAR RM-300 ..................................................$169,500

Excavators - Crawlers

(3) 2017/18 CATERPILLAR 349FL ................................From $289,500 2014 CATERPILLAR 349EL......................................................$169,500 2017 CATERPILLAR 336FL, 2941 Hrs ....................................$215,000 2014 CATERPILLAR 329EL, 4134 Hrs ....................................$159,500 2015 CATERPILLAR 323FL......................................................$139,500 (3) 2018/19 CATERPILLAR 320......................................From $179,500 (3) 2018 SANY SY215C ..................................................................$Call

Dozers - Wheel

2001 CATERPILLAR 854G ......................................................$209,500

Compactors - Padfoot / Smooth Drum

1996 CATERPILLAR 815F ..........................................................$95,000 (7) 2013/14/15/18/19 CATERPILLAR CP56B ..................From $79,500 (4) 2017/18 CATERPILLAR CS56B ..................................From $64,500 (5) 2013/15/17 CATERPILLAR CS66B ............................From $82,500

Motor Graders

2016 CATERPILLAR 140M3 ....................................................$199,500 2014 CATERPILLAR 140M2 VHP ..................................................$Call 2012 CATERPILLAR 16M VHP ................................................$289,500 2018 CATERPILLAR 18M3 ......................................................$769,500 (2) 2013/2015 DEERE 872GP ........................................From $129,500

Ripper

CATERPILLAR D8SS ..................................................................$24,500

Agricultural Tractors

2015 JOHN DEERE 6215R ......................................................$109,500 (4) 2018/19 JOHN DEERE 6120M ....................................From $77,500 2017 JOHN DEERE 5085M ............................................................$Call

Authorized dealer for

Winch

PACCAR PA110VS245 ..................................................................$9,500

Off-Highway Trucks

(6) 2009/11 CATERPILLAR 785D....................................................$Call 2010 CATERPILLAR 777F ........................................................$259,500 (4) 1994/95 CATERPILLAR 777C ....................................From $69,500 2017 CATERPILLAR 773G ................................................................$539,500 (2) 1991 CATERPILLAR 773B ..........................................From $59,500 (2) 2016/17 CATERPILLAR 725C2 ................................From $229,500 (2) 2014/15 CATERPILLAR 725C ..................................From $197,500

Misclleneous Equipment

2019 ROME TRCW16..................................................................$56,500 (2) 2016/18 ROME TRCW12 ............................................From $35,000 2019 ROME TACW16 ..................................................................$36,000 2018 ROME TCW28 ....................................................................$19,750 2018 ROME TCW32 ....................................................................$23,000

Scrapers - Pull

2012 CATERPILLAR 627H........................................................$459,500

Skid Steers - Track

(4) 2020 CATERPILLAR 299D3 XPS ..............................................$Call (2) 2016/18 CATERPILLAR 299D2 XPS ..........................From $59,500 2016 CATERPILLAR 299D2........................................................$65,000 (4) 2014/15/17 CATERPILLAR 299D XPS........................From $59,500 2016 CATERPILLAR 259D..........................................................$42,500 2016 CATERPILLAR 236D..........................................................$35,500

Wheel Loaders

1991 CATERPILLAR 992C ..............................................................$Call 2015 CATERPILLAR 950M, 1222 Hrs ......................................$184,500 2016 CATERPILLAR 938M ......................................................$139,500

Crawler Loaders

2018 963K..................................................................................$264,500

Crawler Carriers

(5) 2019 MOROOKA MST1500VD ..................................From $159,500 2019 MOROOKA MST1500VDR ..............................................$239,500 (4) 2018/19 MOROOKA MST2200VD ............................From $179,500 (2) 2018 MOROOKA MST3000VD ..................................From $229,500 2019 MOROOKA MST4000VD..................................................$319,500 (2) MOROOKA MST660VD ................................................$109,500 Ea.

Artic Truck

(2) 2015/16 CATERPILLAR 725C ..................................From $219,500 2017 CATERPILLAR 725C2......................................................$242,500

Water Equipment - Tower/Tanks

2020 KLEIN KPT-120 ................................................................$154,500

Water Equipment - Trucks

(6) 2014/15 CATERPILLAR 725C ..................................From $279,500 2019 FORD F750 ..................................................................................$95,000 (2) 2007/15 FREIGHTLINER M2 ..............................................From $49,500 (18) 2017/18/19 KENWORTH T370 ..................................From $89,500 (9) 2018/19 PETERBILT 348 ..........................................From $159,500 VOLVO A25D ............................................................................$139,500

AED Gets Approval to Oversee Apprenticeship Programs By Giles Lambertson CEG CORRESPONDENT

After a two-year application process, the AED Foundation has been authorized by the U.S. Department of Labor to create and manage department-approved apprenticeship programs in Associated Equipment Distributor dealerships. The AED Foundation has been designated a “Standards Recognition Entity,” which means the foundation has been certified to oversee development of apprenticeship programs that meet the department’s standards. “It allows our member companies to work with the foundation in setting up apprenticeship programs instead of working with the Department of Labor,” said Brian P. McGuire, AED president and chief executive officer. He noted that some companies had been reluctant to work with the Labor Department because it meant inviting an enforcement agency into the place of business. Members also found the amount of paperwork required by the department to be daunting. “The standards for an apprenticeship program still will be high, but the process will be

less burdensome and when questions or concerns arise, dealers can call the foundation instead of the Department of Labor,” McGuire said. “Our hope is to make it a much easier process.” The foundation sought the certification after the Trump administration directed the department to look for ways third parties could develop apprenticeship opportunities. The department’s response was creation of what it calls “Industry-Recognized Apprenticeship Programs.” In this case, the AED Foundation will officially recognize dealership programs that develop farm equipment mechanics and technicians, bus and truck mechanics, diesel engine specialists and mobile heavy-equipment mechanics. The AED Foundation is one of the first industry associations to be certified. Other types of organizations eligible for the designation include unions, trade groups, nonprofits and state and local governments. The drive for more apprentices comes from the ongoing deficit of skilled workers in trades. Older-generation technicians and skilled labor are retiring and too few younger workers are succeeding them. McGuire said this new program is “not a silver bullet to fix

the skilled labor shortage. But it is another tool in the toolbox. It creates another pathway for a young person to become a technician and gives dealers a more successful pathway to having the techs they need.” AED planners have forecast the need for 70,000 more technicians by 2024 but can only identify how to develop 10,000. McGuire was asked if this new program will help offset the expected shortfall. “Time will tell, but here is my response: It can’t hurt. Whatever new pathways we can create for folks to obtain the skills necessary to be, say, a diesel tech, the better off we’ll be,” McGuire said. The AED Foundation has been accrediting two-year and four-year technical school programs for two decades. That experience plus the existence of 10 AED dealers with successful apprenticeship programs impressed Labor Department personnel. “The certification is a compliment to the AED Foundation and its board of directors,” McGuire said. “They had the foresight to apply and the fortitude to stick it out for two years.” The application process was shepherded by Jason Blake, AED Foundation’s vice-president and chief operating officer, who calls the

successful application “a team effort.” Blake said the pandemic will delay the roll out of the program until January or February. The delay is a matter of safety because setting up the dealerships “is a hands-on process” that will include in-person interviews of a dealer’s human resources people and trainers, an onsite needs assessment, a determination if a dealership needs additional equipment to fulfill program standards and so on. Eventually, the foundation will assign a director to oversee the program, according to McGuire. Until then, responsibility will be shared. Besides actively increasing the number of skilled technicians, the AED Foundation is trying to develop more skilled managers. Its Vision 2024 campaign encourages heavy equipment dealer management to become certified through AED programs. McGuire said more skilled personnel are needed in the industry from top to bottom. “We not only have a shortage of skilled technical workers, we have a shortage of folks to fill all the jobs in dealerships — parts managers, salespeople, other areas of management. We need to have people come into the industry and use our certification program to educate themselves.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 15

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $200

John Deere 850C Dozer, 1:50 scale - $50

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $200

Bobcat 225 Compact Excavator, 1:25 scale - $55

Bobcat 753 Skid Steer Loader, 1:25 scale - $50

Sakai TS150 Asphalt Compactor, 1:40 scale - $50

Liebherr L522 Wheel Loader, 1:50 scale - $50

John Deere Skid Steer Loader, 1:32 scale - $45

Case 850C Track Loader, 1:35 scale - $40

Caterpillar D10 Track-Type Tractor, with Ripper, 1:70 scale - $30

Caterpillar CB-534 Asphalt Compactor, 1:50 scale - $30

Bantam C-35 Dragline, 1:25 scale - $200

Komatsu Mack Granite MP w/Tri-Axle Lowboy Trailer, 1:50 scale - $100

Case 580E Backhoe/Loader, 1:64 scale - $25

Caterpillar 966G Series II Wheel Loader, 1:87 scale - $35

Shipping and Handling Included

Northwest 25-D Cable Shovel, 1:50 scale - $145

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 16 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Expanding, Widening Red River County Highway By Irwin Rapoport CEG CORRESPONDENT

RK Hall LLC started work on the Texas Department of Transportation’s (TxDOT) $14.2 million project to expand and improve U.S. 82 in Red River County in September 2019 and despite rains which had impacted the construction last winter, the general contractor is hopeful to meet the anticipated delivery date of September 2021. The construction zone along U.S. 82 from FM 1159, just east of Clarksville, eastward to the Red River-Bowie County line, covers approximately 17.8 mi. Crews are widening the existing pavement between the Kickapoo Creek bridge and FM 1699, approximately 4.5 mi., to install passing lanes; extend existing cross drainage structures; improve the bridge rail and metal-beam guard fence; install safety end treatments on culverts; and overlay a new pavement surface on the roadway. RK Hall and its crews are rehabilitating portions of the shoulders, approximately 9 ft. of the existing shoulder and 4.5 mi. where the passing lanes are overlapping. Crews already have completed the westbound section of the widening and the extension of the cross culverts in that area, as well the grading of the ditches to acquire better drainage for TxDOT’s right-of-way. All 17.8 mi. will receive a hot mix overlay towards the end of the project. “We are in the middle of working on the eastbound section,” said Zak Moore, RK Hall’s project manager, who noted that the current operations are within a 2-to-3 mi. area. “We did a lot of tree removal at the beginning to make sure no trees were going to compete with the new road that we’re building. That was actually quite a large change order for this job.” Project Challenges Discrepancies in the plans created a challenge. “Once we milled up some of the road, we found a concrete slab,” said Moore. “When this road was originally built, it had a concrete slab under it. We had a couple of problems with that due to the slab extending into where we were rehabilitating the shoulder, but this issue was handled. We have had some utility issues, which we are still fighting in some areas, but most of these issues were headed off early in the project. They were going to be a problem once we got to the eastbound side of the roadway, so we had the utility company go ahead and relocate these conflicting utilities.” Another major challenge was the subgrade on the westbound widening portion of U.S. 82. “It was unexpected,” said Moore. “We

needed a change order to DL Lennon has an on-site cement treat the subgrade mechanic to handle all their day to on that side and we will be day issues with their equipment. If doing the same on the he does not have the necessary eastbound side. The soil tools, someone from their shop was trapping a lot of water will come to fix the equipment. and as we would run In regards to RK Hall’s equipequipment across it, it ment, it rents HAMM and Cat would start pumping pneumatic and steel wheel rollers, water to the top. By and water trucks from dealerships cement treating the subsuch as Holt CAT, Riggs CAT and grade before we built the United Rentals. RK Hall owns its road, it allowed us to own paving equipment, which is bridge over the areas holdsupplied by Roadtec (Astec) such ing water. Ultimately, we as its RP – 190e pavers and its will be building a better shuttle buggies (MTV), which are road for TxDOT. The used for transferring hot mix to the shoulders and edges of the paver. RK Hall also utilizes road are going to hold up Bearcat distributor trucks to spray much better than they Widening operations started with crews milling the shoulder, fol- the tack out in front of the paving would have had we went lowed by making necessary cuts and fills in the subgrade. operations. ahead and built our road “We rented a 2,000 gallon activities that were the hardest to work on top of those waterbed areas.” around with all the rain. Obviously, some of water truck from United Rentals,” said The road widening operations started with the bigger culverts would have a lot of water Moore. “Our rollers, rented from Riggs and crews milling the shoulder, followed by running through them making it impossible Holt CAT, are a mix of HAMM and Cat making necessary cuts and fills in the sub- to extend these culverts. We were able to models. These dealerships are very respongrade. combat this in a few locations by utilizing sive in regards to making sure our equipment “We’re rehabilitating nine feet of existing water pumps, but some areas had too much is properly taken care of.” shoulder where we are adding the passing water. Close to 20,000 cu. yds. of material will lanes,” said Moore, who noted that this was “Another big issue we had to deal with on be excavated on this project. In terms of where the cement treatment paid off. “After this project, which I am sure nearly any other materials being used, there is approximately milling and rehabilitating the nine feet, we construction company can relate to, is the 13,500 cu. yds. of embankment, 18,000 tons added six feet of subgrade to the roadway lack of skilled labor in the construction of flex base, and approximately 80,000 tons and placed our base to build the road even industry. For example, my concrete subcon- of hot mix bid to be laid. more, so we could get back to elevation that tractor relies heavily on work visa programs we needed to be at with the appropriate to bring skilled crews from Mexico to work Timeline materials. We cement treated this flex base, with him during the busy portion of the year. Paving operations are expected to start in added a prime coat and paved directly on top However, he was having issues getting these February and continue into the end of April. of the prime coat with four inches of Type B crews brought in due to the onset of “We will begin with the four inches of hot mix.” COVID-19. Unfortunately, there is not an Type B hot mix on the new eastbound porabundance of skilled concrete crews that are tion of roadway, followed by performing our Equipment not already working for other companies in surface pavement operations throughout the Critical pieces of equipment for the sub- the U.S. On top of this, not many young peo- entire 18 miles of the project,” said Moore. grade and flex base widening have included ple are going into a trade once they leave “We will be working to pave all lanes at one a Bomag sheep’s foot roller; Ferguson pneu- high school. A lot of them are going to col- time through the entire length of the project.” matic rollers; Cat motor graders, roadway lege to pursue management or business Improvement for the bridge rail and mixers and reclaimers; Cat front end loaders; degrees. You could definitely see the effects metal-beam guard fence will be done after Cat 316, 336 and 345 excavators; Cat D4 of this issue throughout this project.” the overlay, when the final roadway elevaand D5 dozers; water trucks for the cement “The majority of the equipment out here tions will be set. treated materials; crash trucks for worker is from the subcontractors,” said Moore. “TxDOT’s specifications require a specifprotection; and haul trucks for materials. “We currently have one sub performing the ic distance between the top of the pavement “They don’t have any steel wheels out dirt work, DL Lennon, and another for the to the center of the guardrail, so we are havhere for the dirt work portion of the widen- culvert extensions, JM Yanez, who has two ing to wait until we lay our final surface to ing even though we do utilize steel wheels excavators here — a Cat 336 and a Cat 316. set the MBGF,” said Moore. for our paving operations,” said Repair and maintenance efforts are minimal The installing of safety end treatments on Moore, “We have quite a lot of equipment for the equipment on this job. The contrac- culverts refers to the reinforced concrete out here on a daily basis.” tors deal with the usual fueling, oil changes pipe in general. Extending existing cross drainage struc- and greasing, but the majority of the time the “We use reinforced concrete top [RCP] to tures were among the first construction maintenance is fairly minimal. The only extend the existing RCP culverts on the projactivities before tearing into the subgrade. three ‘major’ instances I can think of were ect,” said Moore. “Whenever we install safe“We had to get the culvert extensions when a turbo on a sheep’s foot roller went ty end treatments, we put the new pipe up to done, so we could backfill on top of them,” out, injectors had to be replaced on a Cat 345 the existing pipe and pour a concrete collar said Moore. “These culvert extensions are excavator and an idler on a dozer had to be between the two followed by the installation key in carrying the water away from the replaced. Other than those few issues, the of the SET to the RCP using strips of road. The culvert extensions were one of the equipment has held up very well.” Ramnek to seal the pipes together.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 17

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Paving

SECTION

Pages 18-29

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Concours Club Shows Importance of Speedway Paving By Chuck MacDonald CEG CORRESPONDENT

For many people, from teenagers to senior citizens, the idea of tromping the accelerator of a hot car and going as fast as possible is invigorating. Perhaps just going fast is not enough. Showing off your skills might be even better. The best of both worlds is on display at the new speedway at The Concours Club in Miami. Of course, there’s a catch. You must be a member to use the track. Founding Memberships sold out at $350,000 each. The Club is accepting a limited number of membership applications. The initiation fee is $150,000 with $35,000 in annual dues. People who can afford the membership also can probably afford a high-performance car to drive at the track. High-performance driving requires a quality track; that’s why The Concours Club called on Advanced Materials Services (AMS) and Ajax Paving to design and build the track. Brian Prowell, principal engineer of AMS has supervised the construction of more than 30 racetracks, and Ajax Paving in Troy, Mich., has extensive experience in building speedways used by NASCAR. Precision paving was required when the track was built during February and March 2019. The costs of the completed project will be approximately $220 million. The Club called for a 2-plus mi. road course track to be built with multiple configurations. The speedway is similar to the course in Watkins Glen, N.Y., which Ajax also paved. The Concours Club course is not banked, so amateur drivers can test their skills and their vehicles, plus have a lot of fun in the process. Building a speedway has its own unique set of challenges that make it different from construction jobs on an interstate or state highway. “The quality on this job was one of the best of any project we’ve been a part of,” said Prowell. “While a normal freeway job must be concerned with sustaining the weight of trucks [downward forces], speedway paving has to be concerned with the shear [lateral forces] and stickiness of the racecar tires. The high speeds, wide tires and sharp turns demand a hard aggregate to maintain the pavement’s surface characteristics over time.” The smoothness of the track is vitally important. Where a slight bump on the freeway doesn’t matter to a semi or normal passenger car, the same bump can create problems for an expensive car hugging the road at high speed. “Smoothness of the track and uniformity of friction were critically important in the paving process,” said Prowell. “That’s one reason why we required quality granite for the coarse aggregate. Its hardness means that it does not lose friction over time as other aggregates might.”

The Concours Club speedway is more than 2 mi. of road course built with multiple configurations. The course is not banked, so amateur drivers can test their skills and their vehicles.

Prowell noted that Ajax Paving used a Vogele paver with a tamping bar screed to meet the high standards required for the job. “This paver pre-compacted the asphalt mix and helped the team build a smoother road and meet the high- density requirements,” said Prowell.

A worker adjusts the Vogele paver’s screed to help maximize smoothness for the finished track.

Long Trip From Michigan Ajax Paving trucked its equipment from the Detroit area, a trip of nearly 1,400 mi., because of the team’s confidence that the machines could do the job. The paving team also brought along a full-time mechanic in case of breakdowns. The tracks were constructed adjacent to the Miami-Opa Locka Executive Airport meaning noise restrictions were not a problem and permitting was greatly simplified. “Because smoothness was so important, we used a Weiler material transfer vehicle,” said Tim Hay, project manager of Ajax. “This guaranteed a steady flow of material into the paver and also meant that we would not have any trucks bumping the paver. That helps prevent segregation in the mix.” Ajax tried to keep delays minimized for the paver for days that started at 6 a.m. and ran until 5 p.m. The paving team produced a 20-ft.-wide new road. However, the speedway see CONCOURS page 24

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2020 • Page 19

CALIFORNIA Herrmann Equipment N CA (916) 783-9333 S CA (909) 877-5597 MONTANA/S. IDAHO/NEW MEXICO Roadtec (423) 265-0600

NEVADA/UTAH/ARIZONA Goodfellow (702) 293-7504

TEXAS Closner Equipment (210) 732-2131

OKLAHOMA Van Keppel (844) 499-6363

WYOMING/COLORADO Power Motive (303) 355-5900

Page 20 • October 25, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

www.modernmachinery.com Kent, WA (800) 669-2425

Pocatello, ID (800) 829-4450

Missoula, MT (800) 332-1617

Rochester, WA (800) 304-4421

Billings, MT (800) 735-2589

Eugene, OR (800) 826-9811

Spokane, WA (800) 541-0754

Kalispell, MT (800) 434-4190

Portland, OR (800) 950-7779

Boise, ID (800) 221-5211

Contact your local dealer:

Arnold Machinery Company www.arnoldmachinery.com

2975 West 2100 South Salt Lake City, UT 801-972-4000 Idaho Falls, ID 208-523-0822 Meridian, ID 208-887-6000 Twin Falls, ID 208-733-1715

Elko, NV 801-972-4000 Sparks, NV 775-356-1511 Las Vegas, NV 702-642-9000 Phoenix, AZ 602-414-1900 Tucson, AZ 520-294-7677

Pacwest Machinery www.pacwestmachinery.com

8207 South 216th Street Kent, WA 98032 800-935-5933

19255 NE Sandy Blvd Portland, OR 97230 800-929-5933

3515 N Sullivan Road Spokane Valley, WA 99216 800-938-5933

1550 Irving Road Eugene, OR 97402 866-920-5933

www.cooperequip.com 5210 N Loop 1604 E San Antonio, TX 78247 (210) 657-5151 201 Commerce City Blvd. Georgetown, TX 78626 (512) 930-5151

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2020 • Page 21

POWER MOTIVE CORP. www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 303/355-5900 Grand Junction, CO 970/241-1550 Colorado Springs, CO 719-576-5541

Milliken, CO 970/587-1188 Durango, CO 970/259-0455 Cheyenne, WY 307/634-5149

FOUR SEASONS EQUIPMENT www.fourseasons-equip.com 8111 Mills Road Houston, TX 77064 800-234-5007 281-807-9777

Roads must be built. Worlds must be connected.

5524 West Ledbetter Drive Dallas, TX 75236 866-270-1700 214-388-1700

What began over a century ago... Evolved into a combination of experience and innovation.

CISCO EQUIPMENT www.cisco-equipment.com 1706 S. 1st Street Artesia, NM 88210 800-748-1846

520 SE Loop 338 Odessa, TX 800-657-3673

2707 Slaton Hwy Lubbock, TX 79404 877-745-9595

620 N. Bell St. San Angelo, TX 76903 800-496-0271

WESTRAX MACHINERY www.westraxmachinery.net 19618 S. Susana Road Rancho Dominguez, CA 90221 800-411-4717

611 N. Golden Key Street Gilbert, AZ 85233 602-397-8173

19885 Temescal Canyon Road Corona, CA 92881 800-411-4717

www.sakaiamerica.com (800) 323-0535

Page 22 • October 25, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Enhancing Design…

Bomag Cold Planer Offers Reengineered Milling Chamber

The BM 2200/60 offers an 86.3-in. (220-cm) cutting width and features Bomag’s BMS 15 milling tooth holder system for increased milling productivity and extended service life.

Bomag reintroduced its 600-hp-class (440kW) Bomag 2200/60 cold planer with a Tier IV Final (Stage V) engine and multiple productivity enhancing design advancements. The reengineered milling chamber improves the robustness and design of the front material depressor, resulting in increased performance, lower wear and longer component life, according to the manufacturer. A new inner scraper design and improved compartment seal help to prevent material loss. The BM 2200/60 offers an 86.3-in. (220-cm) cutting width and features Bomag’s BMS 15 milling tooth holder system for increased milling productivity and extended service life by up to 30 percent over other cutting systems. The tapered tooth retainer claw boasts a low-resistance profile that delivers more cutting power with less wear. A quick-change cutting tool design reduces the time required to change a full set of teeth by up to 75 percent over conventional systems. Optimized conveyor roller placement improves material flow on the new BM 2200/60 for more efficient removal of millings from the cutting chamber. Improvements to the 31.5-in. (80-cm) gathering and loading belts help to

increase service life. The system’s new integrated dust extraction system helps to improve the working environment for the operators. New replaceable track pads help to reduce service time and increase milling time in the field. Robust track rollers help to increase drive system durability. An 11.8-in. (30-cm) track width and 67-in. (170-cm) track length provide excellent traction when milling at depths reaching 12.6 in. (32 cm). New hydraulic hose placement and routing improve service life, reduce thermal aging and increase machine uptime. Integration of smart cylinders that provide internal measurements remove external sensors and the inherent risk of damage. An integrated service platform simplifies and significantly reduces the time for daily maintenance procedures, further improving machine uptime. Contractors also can choose the 600-hp (440kW) class Bomag BM 2000/60 model with a 78.7-in. (200-cm) milling width and all the same series design improvements. The new Bomag BM 2200/60 cold planer was unveiled at Bomag Innovation Days, Oct. 21 to 25, 2019, in Ridgeway, S.C. For more information, visit www.bomag.com. 

Wacker Neuson Offers Zero Emission Compaction Solutions Wacker Neuson’s battery-powand provides constant power output ered rammers, plates and backpack over the entire discharge phase, provibrator are real game changers, viding full compaction and consoliaccording to the manufacturer. dation performance from the first to These zero-emission compaction last minute of work. Under typical and concrete consolidation products working conditions, two batteries provide an alternative power source with a charger can fulfill the needs of for indoor applications and job sites a standard working day. Should the with noise and emission guidelines. battery need to be changed, it can be Plus, the same battery system can be easily removed without tools and used to power all seven products replaced with a charged battery withacross the three product lines. in a few simple steps. The heart of the AS50e and Wacker Neuson’s zero emission AS60e rammers, the AP1840e and compaction products are an ideal AP1850e plate series and the ACBe solution for commercial interior backpack vibrator is Wacker construction or renovation projects; Neuson’s BP1000 lithium-ion batfor use in poorly ventilated areas, tery. One system, including battery including trenches and tunnels, or and charger, is designed to easily in sound-sensitive areas such as These zero-emission compaction and concrete consoli- hospitals and schools. As a technoexchange between all products. The BP1000 can be inserted into dation products provide an alternative power source logical leader in the rammer indusany product without the need of spe- for indoor applications and job sites with noise and try, Wacker Neuson was able to cial tools. No cords and no fumes emission guidelines. Plus, the same battery system can take the best performance characmean the operator can move around be used to power all seven products across the three teristics of the rammer, percussion the job site freely and is no longer product lines. system and ramming shoe and exposed to heat, exhaust fumes and adapt it to the AS rammer series, engine noise. The smart-battery technology fuel source to spill during refueling, trans- allowing users to experience similar comis designed to recognize which product it is portation and operation. paction results of the engine powered Wacker Neuson’s BP1000 maintenance- units, but with zero emissions, according to powering, providing for the most efficient operation. Additionally, there is no liquid free battery uses an easy push button start the manufacturer.

The battery-powered AP plate series is available with or without a water tank for soil and asphalt compaction. Like the rammer, the plates offer a new solution for contractors and rental centers looking for a cordless, emission-free plate compactor for a variety of applications. These are the only single-direction plates on the market without a V-belt. The virtually maintenance-free electric motor is mounted directly on the baseplate, which requires fewer wear parts and reduces service time when compared to a gas or diesel engine, contributing to the low total cost of ownership. The battery-powered ACBe is a portable backpack vibration system that is ideal for the consolidation of thick interior concrete slabs with or without reinforcing steel. The three-part modular system consists of the backpack with integrated converter, the removable/replaceable battery and the internal vibrator. The on/off switch is easily accessible on the shaft and will shut off the motor in the head, but not the battery, which allows the operator to pause for 30 minutes during the consolidation process without needing to restart the battery. For more information, visit www.wackerneuson.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2020 • Page 23

KIRBY-SMITH MACHINERY INC.

NUECES POWER EQUIPMENT

MODERN MACHINERY

4RIVERS EQUIPMENT

www.kirby-smith.com

www.nuecespower.com

www.modernmachinery.com

www.4riversequipment.com

6715 W. Reno Oklahoma City, OK 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600

Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Waco, TX 254-261-1370

Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066

Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811

Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589

Fort Collins, CO 970-482-7154 Frederick, CO 800-490-6162 Colorado Springs, CO 800-364-3029 Pueblo West, CO 719-547-3505 Albuquerque, NM 505-884-2900 Farmington, NM 505-326-1101

HONNEN EQUIPMENT CO. www.honnen.com Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441

Ogden, UT 801-627-0049 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

Page 24 • October 25, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years New Marathon TPS250T tack distributor, Honda gas engine, 250 gal, 5 ft spray wand w/50 ft hose, propane burners, flushing system, electric brakes (some with spray bars)- $11,500 $13,600

Ajax paving workers build the course’s challenging hairpin turns.

Precision Paving Illustrates Best Practices Being Utilized CONCOURS from page 18 2005 Rosco Maximizer II distributor, 1950 gallons, EZ-2S computer w/1 ft cut-offs, diesel heat, 12 ft spray bar, 2005 IH 7300 w/DT466 diesel engine, Eaton 6 spd trans - $58,000

2007 Etnyre Centennial II distributor, 2000 gallons, computerized w/1 ft cut-offs, propane heat, 14 ft spray bar, 2007 Ford F750XL, Cat C7 diesel, 6 spd trans, 2 spd axle - $67,000

2010 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, Cat C7 diesel engine, power crown, slope & height, self lubing system, power auger tunnels, front wheel assist – $88,000

2009 Hamm HD70K combination roller, 59” drum on front, 4 tires on back, Deutz diesel engine, water system - $32,000

2001 Blaw Knox PF 5510 paver, Omni IIIA screed 1018 ½ ft w/diesel heat, power crown & slope, Cummins diesel engine, truck hitch - $29,000

New Warren aggregate tailgate spreaders, 8 ft wide maximum spreading, 1 ft gates, operator’s platform, gravity feed, GS84’s and GS87’s - $4300-$4600

New Marathon TPS115S tack distributor, Honda 5.5hp gas engine, 10GPM pump, 115 gallons, 5 ft spray wand w/50ft hose, 4” filler lid, hose reel, propane 2015 Volvo PT125R pneumatic roller, 9 wheels, burner, flushing system - $7,900 Kubota V3600T diesel engine, water system - $43,000

3517 Wayne White Rd., Climax, NC 27233

required a 40-ft.-wide road, almost double the width of two lanes of a traditional freeway. That meant a joint was created where the two new lanes met. Again, smoothness between the two “lanes” was crucial. “We cut into the joint vertically between the two lanes and applied sealer to bind the two lanes together tightly,” said Hay. “A poor joint can allow water to seep into the road and degrade the road over time as well as affect the smoothness.” The circuit was new construction and required approximately 30,000 tons of asphalt. The nearest airport runway was about one-half mi. away, which enabled the Ajax team to construct some unusual safety features. “We built some large run-off areas so that if a driver lost control on a turn, he could slow down safely,” said Hay. The Ajax paving team constructed the road in three stages — the first, a 2-in. base course, the second a 1.5-in. leveling course, the third, a 1.5-in. surface course. The base asphalt mix was the equivalent of a standard Superpave mix used in interstate work. The leveling and surface mixes were a specialty racetrack mix, somewhat similar to an airport mix, but with more polymer and adjusted to increase in-place density. Ajax took another unusual step in grinding down any bumps in the leveling course. “We believed that would help us to make the final course as smooth as possible,” said Hay. “In the end, we were able to meet all the smoothness requirements.” Another challenge for the designers of the speedway was contending with the intense heat generated by the tires’ friction with the road. “We used a mix that had a high polymer

liquid content so the road could handle the heat,” said Hay. With a normal mix, workers can rake loose asphalt into place to fix any imperfections. “That mix is hard to work with because it is so stiff.” For some of the tight turns, all the cars will be braking heavily, then making sharp turns at the same spot. The stiffer mix should prevent ruts from forming and the road deteriorating over time, according to Ajax. The Ajax team put the finishing touches on the road by running one set of rollers close behind the paver with the finish rollers further back. The team’s experience with speedways and outstanding performance from the equipment enabled them to meet all requirements. “Our guys were proud of this project,” said Hay. “It was great to know that we completed a job that not many paving teams are capable of doing.” Transporting Material The paving team relied on the steady production of asphalt from General Asphalt of Miami. The plant that produced the mix was just 10 mi. from the construction site. “The mix required 20 to 25 percent granite, which is not usually required by most Florida operations, so we needed to bring it in from Georgia,” said Albert Lopez of General Asphalt. “We also had to get the polymer required and have it available. We were able to meet the requirements for air voids and volumetric targets as required. “It was fun to be involved in a project like this,” added Lopez. “The amount of testing done was at least five times what is normally done. The experts challenged us, and we were able to deliver a mix to their exacting standards.”  CEG

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2020 • Page 25

BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511 866/796-3211

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 McAlester, OK 918/310-1550 Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729

ROMCO EQUIPMENT CO. www.romco.com Austin, TX 512/388-2529 877/851-1026 Buffalo, TX 903/322-5602 Dallas (Carrollton), TX 214/819-4100 800/227-6626 Ft. Worth, TX 817/626-2288 866/966-4602

Longview, TX 903/758-5576 Midland, TX 432/234-9409 San Antonio, TX 210/648-4600 800/966-4601

Page 26 • October 25, 2020 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Products shown with optional equipment.

MAULDIN Paving g Products... MASTERS S OF THE MA AT! T! Contact your MAULDIN N dealership today to see the newly redesigned M415XT! For more information visit us at www.4aMauldin.com.

Golden Equipment Company www.goldenequipment.com 721 Candelaria Rd NE Albuquerque, NM 87107 (505) 345-7811

1150 Madison Lane Farmington, NM 87401 (505) 326-1413

29268 Hwy 160 Durango, CO 81303 (970) 247-8830

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 25, 2020 • Page 27

ECONOMIZER

TANGO BOMAG OSCILLATION

VARIOCONTROL

ASPHALT MANAGER

www.komatsusw.com

www.komatsueq.com 1486 South Distribution Drive 4715 W. Winnemucca Blvd. Winnemucca, NV 89445 Salt Lake City, UT 84104 775-753-7557 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

1409 E. 3850 S. St. George, UT 84790 435-986-1000

3825 Losee Road North Las Vegas, NV 89030 702-399-1004

10350 S Sandwash Rd. Myton, UT 84052 435-216-7777

900 Marietta Way Sparks, NV 89431 775-356-1334

3460 Salt Creek Rd. Casper, WY 82602 307-223-4660

405 Jonah Drive Rock Springs, WY 82901 307-686-1300

6101 Pan American W Freeway NE Albuquerque, NM 505-345-8383

4520 National Park Hwy Carlsbad, NM 88220 575-628-8301

10790 S. Highway 59 Gillette, WY 82718 307-682-1445

901 Troy King Road Farmington, NM 87401 505-324-8601

1181 Burgundy Drive El Paso, TX 79907 915-872-1001

Page 28 â€˘ October 25, 2020 â€˘ www.constructionequipmentguide.com â€˘ Paving Section â€˘ Construction Equipment Guide

Construction Equipment Guide â€˘ Paving Section â€˘ www.constructionequipmentguide.com â€˘ October 25, 2020 â€˘ Page 29

sÂŽÂŽ Ă?ÂŽĂŁ ĂŠ Ă„Â› ĂŠÂĽ ĂŠ Ă§Ă™ Â—Â›Â›Âƒ s ÂƒÂ˝Â› Ă™Ă? ĂŁĂŁĂŠ ĂŠÂ— Â—Âƒ ÂƒĂšÍŠ

APCO EQUIPMENT MENT APCO EQUIPMENT MENT

www.apcoequipment.com ent.com www.apcoequipment.com ent.com 3432 N 5th Street reet 3432 N 5th Street reet N. Las Vegas, Vegas, NV V 89032 N. Las Vegas, Vegas, NV V 89032 (800) 574-4089 89 (800) 574-4089 89

DYNAPAC SE S ISM I IC TECHNOLOGY â€“ SH AKI NG U P CO MP ACTION

Â„

Â„ Â„ Â„

www.banemachinery ery.com

2449 Manana ery.com Rd. www.banemachinery Dallas, TX 75220 220 2449 Manana Rd. (214) 352-2468 68 Dallas, TX 75220 220 T Tyler yler, TX (214) 352-2468 68 (903) 597-6641 41 Tyler, TX Tyler Ft. Worth, TX X (903) 597-6641 41 (817) 847-5894 94 Ft. Worth, TX X (817) 847-5894 94

BANE MACHINER R RY Y, INC. INC BANE MACHINER R RY Y, INC.

www.cooperequip.com perequip.com www.cooperequip.com perequip.com

ROAD MACHINER RY Y ROAD MACHINER RY Y www.roadm machineryy.com .com www.roadm machineryy.com .com

www.clboyd.com com

COOPER EQUIPMENT QUIPMENT CO. COOPER EQUIPMENT QUIPMENT CO.

C L. C. L BOYD CO.,., INC. INC C. L. BOYD CO.,., INC.

4220 West Reno o Ave. www.clboyd.com com Oklahoma City, OK K 73107 4220 West Renoo Ave. (800) OKC-BOYD â€˘ (405) 5) 942-8000 Oklahoma City, OK K 73107 Ardmore, OK K (800) OKC-BOYD â€˘ (405) 5) 942-8000 (866) 720-2693 â€˘ (580)) 224-2693 Ardmore, OK K Lawton, OK K) 224-2693 (866) 720-2693 â€˘ (580) (800) 633-2693 â€˘ (580)) /355-6667 Lawton, OK K -2693 â€˘ (580)) /355-6667

902 S.. 7th Street 902 S.. 7th Street Phoenix, x, AZ 85034 Phoenix, x, AZ 85034 (480) 545-2400 (480) 545-2400 Tuscon, con, AZ Tuscon, con, AZ (520) 623-8681 (520) 623-8681 Prescott, scott, AZ Prescott, scott, AZ (928) 778-5621 (928) 778-5621 %DNHUUVĂ€HOG &$ %DNHUUVĂ€HOG &$ (661) 695-4830 (661) 695-4830 Perris, rris, CA Perris, rris, CA (909) 355-3600 (909) 355-3600 Pico Riviera, CA Pico Riviera, CA (562) 699-6767 (562) 699-6767

DOGGETT OGGETT HEA AVY VY MACHINER RY Y SERVICES DOGGETT OGGETT HEA AVY VY MACHINER RY Y SERVICES www.doggett.com www.doggett.com

9111 North Freeway Texas Houston, ton, TX 77037 (713) B3) 493-7396 Beaumont Beaumont, aumont, TX (409) 9) 842-1754 (409) 9)Bryan 600-9290 B9) 823-1905 Bryan, TX (979) (979) 9) 213-5985 Cor rpus Christi Corpus us289-0727 Christi, TX (361) 1) (361) H1) 371-8166 Houston Longview ngview, TX (713) 3) 679-6700 (903) L3) 470-7195 Longview L3)ufkin, TX (903) 758-3326 (936) 6)Lufkin 465-9743 San n Juan, TX (936) 6) 634-8801 (956) S6) 329-6024 San Juan Tyler, Tyler TX (956) 6) 787-0001 (903) 3)Tyler T707-8085 yler Vi3)ctoria, TX (903) 592-8900 (361) 1) V 433-5017 Victoria (361) 1) 570-6666

Alexandria, ria, LA Louisiana ana (318) 319-0394 9-0394 Baton Rouge, uge, Alexandria dria LA (225) 442-0455 330-8266 0-8266 (318) 2-0455 Broussard, rd, LA Baton Rouge (337) 291-3750 443-2517 3-2517 (225) -3750 Covington, on, LA Broussard sard (985) 837-9481 807-1393 7-1393 (337) 7-9481 Lake Charles, rles, LA Covington gton (337) 893-3005 405-7535 (985) 35-7535 3-3005 3005 Monroe, e,arles LA Lake Charles (318) 460-7480 0-7480 (337) 430-3045 0-3045 Shreveport, ort, LA Monroe oe (318) 532-6234 2-6234 (318) 343-8787 3-8787 St. Rose, e, LA Shreveport port (504) 507/1923 7/1923 (318) 631-3090 -3090 St. Rose ose (504) 466-5577 6-5577

dĹšÄž ĆŒĹ˝Ä‚Äš ĆŒ ĆšĹ˝ Ć?ĆľÄ?Ä?ÄžĆ?Ć? Ć?ĆšÄ‚ĆŒĆšĆ? Ç Ĺ?ĆšĹš ĆšĹšÄž ĆŒĹ?Ĺ?ĹšĆš Ć‰Ä‚ĆŒĆŒĆšĹśÄžĆŒĆ?ÍŠ The rroad to success starts with the right parrtners! Ĺ˝ĹśÍ›ĆšĆš ĹŻÄžĆš ÄšĹ˝Ç ĹśĆ&#x;ĹľÄž ĹŹÄžÄžĆ‰ Ç‡Ĺ˝Ćľ Ä¨ĆŒĹ˝Ĺľ Ĺ?ÄžĆšĆšĹ?ĹśĹ? ĆšĹšÄž Ćš ĹŠĹ˝Ä? Ĺ˝ĹśÍ›ĆšĆš ĹŻÄžĆš ÄšĹ˝Ç ĹśĆ&#x;ĹľÄž ĹŹÄžÄžĆ‰ Ç‡Ĺ˝Ćľ Ä¨ĆŒĹ˝Ĺľ Ĺ?ÄžĆšĆšĹ?ĹśĹ? ĆšĹšÄž Ćš ĹŠĹ˝Ä? ÄšĹ˝ĹśÄžÄžÍ˜ WÄ‚ĆŒĆšĹśÄžĆŒ Ç Ĺ?ĆšĹš Ä‚ Ä?Ĺ˝ĹľĆ‰Ä‚ĹśÇ‡ Ç ĹšĹ˝ Ç Ĺ?ĹŻĹŻ Ç Ĺ˝ ĆŒĹŹ Ä‚Ć? ÄšĹ˝ĹśÄžÄžÍ˜ WÄ‚ĆŒĆšĹśÄžĆŒ Ç Ĺ?ĆšĹš Ä‚ Ä?Ĺ˝ĹľĆ‰Ä‚ĹśÇ‡ Ç ĹšĹ˝ Ç Ĺ?ĹŻĹŻ Ç Ĺ˝ ĆŒĹŹ Ä‚Ć? ĹšÄ‚ĆŒÄš Ä‚Ć? Ç‡Ĺ˝Ćľ ÄšĹ˝Í• Ĺ?ÄžĆŤĹśĹ? Ç‡Ĺ˝Ćľ ĆšĹšÄž Ć‰Ä‚ĆŒĆšĆ? Ç‡Ĺ˝Ćľ ĹśÄžÄžÄš Ç Ĺ?ĆšĹšĹ?Ĺś ĹšÄ‚ĆŒÄš Ä‚Ć? Ç‡Ĺ˝Ćľ ÄšĹ˝Í• Ĺ?ÄžĆŤĹśĹ? Ç‡Ĺ˝Ćľ ĆšĹšÄž Ć‰Ä‚ĆŒĆšĆ? Ç‡Ĺ˝Ćľ ĹśÄžÄžÄš Ç Ĺ?ĆšĹšĹ?Ĺś ĎŽĎ°Í˛ĹšĹ˝ Ĺ˝ĆľĆŒĆ?ÎŽÍ˜ Guaranteed. d. ĎŽĎ°Í˛ĹšĹ˝ Ĺ˝ĆľĆŒĆ?ÎŽÍ˜ Guaranteed. d. ÎŽ'ĆľÄ‚ĆŒĆŒÄ‚ĹśĆšÄžÄž Ä‚Ć‰Ć‰ĹŻĹ?ÄžĆ? ĆšĹ˝ Ä?ĆŒÄžÄ‚ĹŹÄšĹ˝Ç Ĺś Ĺ˝ĆŒÄšÄžĆŒĆ? Ć‰ĹŻÄ‚Ä?ÄžÄš Ä‚Ä?Ä?Ĺ˝ Ĺ˝ĆŒÄšĹ?ĹśĹ? ÎŽ'ĆľÄ‚ĆŒ Ä‚Ć‰Ć‰ĹŻĹ?ÄžĆ? ĆšĹ˝ 'ĆľÄ‚ĆŒÄ‚ĹśĆšÄžÄž Ä?ĆŒÄžÄ‚ĹŹÄšĹ˝Ç Ĺś ĆšÄžĆŒĹľĆ? Ĺ˝ĆŒÄšÄžĆŒĆ? Ć‰ĹŻÄ‚Ä?ÄžÄš Ä‚Ä?Ä?Ĺ˝ Ĺ˝ĆŒÄšĹ?ĹśĹ? ĆšĹ˝ ĆšĹšĆŒÄ‚ĹśĆšÄžÄž Äž ĎŽĎ° ,Ĺ˝ĆľĆŒ WÄ‚ĆŒĆšĆ? Ä‚ĹśÄš Ä?Ĺ˝ĹśÄšĹ?Ć&#x;Ĺ˝Ĺś ĹśĆ?Í˜ ĆšĹ˝ ĆšĹšÄž ĎŽĎ° ,Ĺ˝ĆľĆŒ WÄ‚ĆŒĆšĆ? 'ĆľÄ‚ĆŒÄ‚ĹśĆšÄžÄž ĆšÄžĆŒĹľĆ? Ä‚ĹśÄš Ä?Ĺ˝ĹśÄšĹ?Ć&#x;Ĺ˝Ĺś ĹśĆ?Í˜

Visit dynapac.us/partsguarantee for detaails. Visit dynapac.us/partsguarantee for detaails.

Your Pa Partner on thee Road R Ahea ad

Follow Dyynapac North America

dynapaac.us | 800 -651- 00 033

Ćľ ĹšĹśĹ˝ĹŻĹ˝ ĆŒ Äž Äž ĹśĆš Ć? Ĺ? Ä‚ĹľÄ‚Ĺ?Äž Ä?ĹšĹ?ĹśÄžÍ˜

7651 Ronson onson Road 7651 Ronson onson Road San Diego, go, CA 92111 San Diego, go, CA 92111 (858) 278-8351 (858) 278-8351 1330 W Mission Road 1330 W Mission Road Escondido, do, CA A 92029 Escondido, do, CA A 92029 (760) 739-9100 (760) 739-9100 440 West st Aten Road 440 West st Aten Road Imperial, al, CA 92251 Imperial, al, CA 92251 (760) 355-7700 (760) 355-7700 4726 Convoy onvoy Street 4726 Convoy onvoy Street San Diego, go, CA 92111 San Diego, go, CA 92111 (858) 278-8338 (858) 278-8338

2506 Slaton Highway hway www.beeequipmentsales.com tsales.com Lubbock, TX 79404 9404 2506 Slaton Highway hway (806) 745-15111 Lubbock, TX 79404 9404 (806) 745-15111

www.clairemontequipment.com ontequipment.com www.clairemontequipment.com ontequipment.com

17474 Judson udson Road 5210 Loop 1604 17474NJudson RoadE San Antonio, TX 78247 San Antonio, TX 78247 (210) 657-5151 (210) 657-5151 201 Commerce mmerce Blvd. 201 Commerce mmerce Blvd. Georgetown, own, TX 78626 Georgetown, own, TX 78626 (512) 930-5151 (512) 930-5151

BEE EQUIPMENT SALES ALES LTD. L www.beeequipmentsales.com tsales.com BEE EQUIPMENT SALES ALES LTD. L

CLAIREMONT NT EQUIPMENT CLAIREMONT NT EQUIPMENT

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2020 • Page 31

From 78 to 536 Horsepower, you’ll find the most superior performing line of T4F dozers to meet the needs of the most demanding jobsite. You’ll find lower initial acquisition costs, and a lower overall total cost of ownership. You’ll find the industry’s best total coverage warranty. And you’ll also find a rapidly growing US Dealer network – with complete parts and service support. Go ahead and search for a better value in the market. You won’t find one. Period.

Our Dozers are Engineered for your Business: + High Productivity + High Drawbar Pull + Stability + Precise Control + Excellent Visibility & Maximum Operator Comfort + Move More Material in Less Time + Optimum Owning & Operating Costs + Versatility Across A Wide Range of Applications + Durability You Can Depend On

Contact a Sales Rep about Competitive Financing Available! Mega Machinery Co. 12215 Highway 67 • Lakeside, CA 92040 (888) 883-7618

www.megamachineryco.com

ENGINEERED FOR YOUR BUSINESS.

Page 32 • October 25, 2020 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

see CHART page 36

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

D1 LGP D1 Mulcher LGP D2 LGP D3 LGP D5K2 LGP D5 LGP D6K2 LGP (Tier 4F) D6 LGP (30 in.) D6 XE LGP (30 in.) D6 WH LGP (30 in.) D6 XE WH LGP (30 in.) D6 LGP (36 in.) D6 XE LGP (36 in.) D6 WH LGP (36 in.) D6 XE WH LGP (36 in.) D7 LGP D8T LGP D8T WH LGP

80 (60) 104 (78) 92 (69) 104 (78) 104 (78) 170 (127) 132 (98) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 215 (160) 265 (198) 354 (264) 354 (264)

18,839 (8,545) 24,698 (11,203) 19,066 (8,648) 21,810 (9,893) 20,992 (9,522) 42,263 (19,170) 30,664 (13,909) 50,130 (22,739) 50,130 (22,739) 52,751 (23,928) 52,751 (23,928) 52,751 (23,928) 52,751 (23,928) 55,674 (25,253) 55,674 (25,253) 63,220 (28,676) 83,200 (37,739) 92,300 (41,867)

Cat C3.6 Cat C3.6 Cat C3.6 Cat C3.6 Cat C4.4 ACERT Cat C7.1 Cat C4.4 ACERT Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C15 ACERT Cat C15 ACERT

D1 XL D2 XL D3 XL D5 D6 D6 XE D6 WH D6 XE WH D6K2 XL (Tier 4F) D7 D7 WH D8T D8T WH D9T D9T WH D9T (Tier 4F) D9T WH (Tier 4F) D10T2 D11 D11T CD

80 (60) 92 (69) 104 (78) 170 (127) 215 (160) 215 (160) 215 (160) 215 (160) 132 (98) 265 (198) 265 (198) 354 (264) 354 (264) 410 (306) 410 (306) 436 (325) 436 (325) 600 (447) 850 (634) 850 (634)

17,855 (8,099) 18,382 (8,338) 20,640 (9,362) 37,875 (17,180) 48,500 (21,999) 48,500 (21,999) 52,166 (23,662) 52,166 (23,662) 29,258 (13,271) 65,644 (29,776) 62,035 (28,139) 87,600 (39,735) 87,600 (39,735) 94,265 (42,758) 109,705 (49,761) 95,917 (43,507) 110,471 (50,109) 139,010 (63,054) 229,800 (104,236) 220,385 (99,965)

Cat C3.6 Cat C3.6 Cat C3.6 Cat C7.1 Cat C9.3B Cat C9.3B Cat C9.3B Cat C9.3B Cat C4.4 ACERT Cat C9.3B Cat C9.3B Cat C15 ACERT Cat C15 ACERT Cat C18 ACERT Cat C18 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C32 Cat C32 ACERT

Crawler Dozers Non LGP

MODEL

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

LIEBHERR Loaders

LR 626 LR 636

141 (105) 181 (135)

35,561 - 41,006 (16,130 - 18,600) 45,327 - 50,305 (20,746 - 22,694)

PR 716 PR 726 PR 736 PR 746 PR 756 PR 766 PR 776

125 (93) 168 (125) 214 (160) 254 (190) 349 (260) 416 (310) 757 (565)

29,100 - 33,510 (13,200 - 15,200) 38,581 - 45,856 (17,500 - 20,800) 46,738 - 56,218 (21,200 - 25,500) 57,100 - 69,446 ( 25,900 - 31,500) 78,044 - 94,799 ( 35,400 - 43,000) 101,909 - 119,462 (46,225 - 54,187) 142,743 - 161,354 (71,800 - 73,189)

Dozers

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

TD-8S LGP TD-9S LGP TD-15R/Ex LGP

94 (70) 113 (84) 209 (156)

22,707 (10,300) 24,912 (11,300) 46,451 (21,070)

Cummins QSF 3.8 Cummins QSF 3.8 Cummins QSB 6.7

TD-8S LT TD-9S LT TD-15R/Ex (Semi-U) TD-15R/Ex (Angle) TD-15R/Ex LT (Semi-U) TD-15R/Ex LT (Angle) TD-15R/Ex WT (Semi-U) TD-15R/Ex WT (6-way PAT) TD-15R/Ex LGP (Semi-U) TD-25R/Ex (Semi-U 13' 3") TD-25R/Ex (Full-U) TD-25R/Ex (Angle) TD-25R/Ex (Coal blade)

94 (70) 113 (84) 206 (154) 206 (154) 206 (154) 206 (154) 206 (154) 206 (154) 206 (154) 330 (246) 330 (246) 330 (246) 330 (246)

22,046 (10,000) 24,251 (11,000) 45,767 (20,760) 45,857 (20,800) 46,098 (20,910) 46,188 (20,950) 47,211 (21,415) 46,611 (21,142) 47,884 (21,720) 90,940 (41,250) 92,989 (42,179) 91,194 (41,365) 96,177 (41,365)

Cummins QSF 3.8 Cummins QSB 3.3 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSB 6.7 Cummins QSX 15 Cummins QSX 15 Cummins QSX 15 Cummins QSX 15

DRESSTA

CATERPILLAR Crawler Dozers LGP

MODEL

D 924 A7 D 934 A7 D924 A7 D 934 A7 D 934 EVO D 936 A7 D 946 A7 D 9508 A7-04 D 9512 A7

Crawler Dozers LGP

Crawler Dozers Non LGP

MODEL

KOMATSU D37EX-24 D37PX-24 D39EX-24 D39EXi-24 D39PX-24 D39PXi-24 D51PX-24 D51EX-24 D51EXi-24 D51PXi-24 D61EX-24 D61EXi-24 D61PX-24 D61PXi-24 D65EX-18 D65WX-18 D65PX-18 D65EXi-18 D65PXi-18 D65EX-18 WH D65WX-18 WH D65PX-18 WH D85EX-18 D85PX-18 D85EXi-18 D85PXi-18 D85EX-18 WH D85PX-18 WH D155AX-8 D155AX-8 LGP D155AXi-8 D155AX-8 WH D375A-8 D475A-5E0

ENGINE POWER HP (KW)

WEIGHT LBS. (KG)

ENGINE TYPE

89 (66) 89 (66) 105 (78) 105 (78) 105 (78) 105 (78) 131 (98) 131 (98) 131 (98) 131 (98) 168 (125) 168 (125) 168 (125) 168 (125) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 217 (162) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 264 (197) 354 (264) 354 (264) 354 (264) 354 (264) 609 (455) 890 (664 )

19,842 (9,000) 20,503 (9,300) 21,891 (9,930) 21,848 (9,910) 22,817 (10,350) 22,774 (10,330) 31,438 (14,269) 30,821 (13,980) 30,380 (13,780) 31,504 (14,190) 40,830 (18,520) 41,094 (18,640) 42,904 (19,460) 43,167 (19,580) 48,796 (22,180) 51,529 (23,373) 51,960 (23,659) 45,780 (20810) 50,420 (22960) 51,065 (23165) 57,035 (25,873) 53,468 (24,225) 68,165 (30920) 63,800 (28940) 67,439 (30,590) 65,080 (29,520) 68,445 (31050) 64,080 (29070) 89,300 (40500) 92,800 (42100) 90,610 (41100) 91,515 (41510) 163,340 (74,090) 238,960 (108,390)

Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D95LE-7 Komatsu SAA4D107E-3 Komatsu SAA4D107E-3 Komatsu SAA4D107E-3 Komatsu SAA4D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D107E-3 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D114E-6 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D125E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D140E-7 Komatsu SAA6D170E-7 Komatsu SAA12V140E-3

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2020 • Page 33

MORRE Conntra ctors c s RELYY ON US We e’re pro oud that D Rubber Tracks are

#1 Seellin rubbber tr brand in America.

800-36 65-7260

CALL US TODA O Y TO GET THE E BEST PRICE ON RUBBER TRA RACKS, YANMAR A PARTS A & U UNDERC AR RRIAGE PART A S

depparts.c ts com ts.c

Ashland, VA VA » Jacksonville, FL » Dallas, TX T » Cincinnati, OH » Portland,OR » Sacrament ento, CA » Schenectady,, NY » Leduc, AB

Page 34 • October 25, 2020 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

New Deere 700L, 750L Dozers Enhance Productivity, Reliability, Comfort in Cab Addressing the needs of the modern operator, the new John Deere 700L and 750L dozers feature improvements to productivity, reliability and operator comfort. Inspired by customer feedback, the updates include an all-new operator station, increased power levels, low-effort electrohydraulic (EH) controls and a suite of factory grade control solutions. “When developing the 700L and 750L, we leveraged feedback from contractors around the world. These next generation dozers are the most productive, reliable and easiest to operate yet,” said Nathan Horstman, product marketing manager, crawlers, John Deere Construction & Forestry. “These new models merge power and technology to deliver an easy-to-use, comfortable dozer that is built to run all day.” The 700L and 750L deliver more power than the previous K-Series models, boasting 135 hp(101 kW) and 175 hp (131 kW), respectively. As a result, both models have more power than any dozer in their respective size class, according to the manufacturer. The new crawler dozers are equipped with a six-cylinder, 6.8-L John Deere engine. Additionally, the 750L operating weight is increased by 750 lbs., providing more tractive effort and better balance to improve machine performance. The dozers are available with new, wider blade options, including a 161-in. option, the widest blade offered in the 750-size class. Integrated spill sheets on the 700L machine further increase blade capacity. Both dozers can be equipped with a new factory-installed slope control offering. Slope control makes grading easy by automatically maintaining the blade angle without the need for an external laser or GPS reference. This enables novice operators to be more accurate and veteran operators to hold grade with less effort. The slope control machines are also SmartGrade-ready, creating an easy upgrade path to a full 3D mastless system in the field. The new operator station is a ground-up redesign with a focus on visibility and operator comfort. Featuring 15 percent more volume and 14 percent larger door openings, the

new operator station is spacious and easy to access, and it offers better visibility to the blade. Standard ergonomically designed EH controls reduce operator fatigue and allow for effortless grade control installation in the field. Other comfort-boosting machine options include a premium heated and ventilated seat, rear camera and automatic temperature control, keeping operators comfortable even during long days. A new, 7-inch color monitor can interchange to show grade control information as well. Operator comfort is further improved through lower cabin sound levels on both models, including a 50 percent reduction in noise on the 700L versus the previous model. To increase uptime, these next generation dozers have optimized hydraulic hose and electrical harness routings to reduce the possibility of rub points. Additionally, hydraulic and hydrostatic oil change intervals are extended to 4,000 hours, reducing operating cost. For more information, visit www.JohnDeere.com. 

www.roadmachinery.com Phoenix, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 520-623-8681 Bakersfield, CA 661-695-4830 Hayward, CA 510-659-1903 Fresno, CA 559-834-3149 Mojave, CA 661-824-2319 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540 Santa Rosa, CA 707-544-4147

ROAD MACHINERY LLC

www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Durango, CO 970-259-0455 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188

POWER MOTIVE CORPORATION

The 700L and 750L deliver more power than the previous K-Series models, boasting 135 hp (101 kW) and 175 hp (131 kW), respectively.

Cheyenne, WY 307-634-5149

www.komatsueq.com 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

1409 East 3850 South St. George, UT 84790 435-986-1000

3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334

10790 South Highway 59 Gillette, WY 82718 307-682-1445

Both dozers can be equipped with a new factory-installed slope control offering. Slope control makes grading easy by automatically maintaining the blade angle without the need for an external laser or GPS reference.

405 Jonah Drive Rock Springs, WY 82901 307-686-1300

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2020 • Page 35

WAUKESHA-PEARCE INDUSTRIES, INC.

www.wpi.com 12320 S. Main Street • Houston, TX 77035 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

www.kirby-smith.com 6715 W Reno Avenue • Oklahoma City, OK 73137 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

KIRBY-SMITH MACHINERY INC.

www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383

4520 National Park Hwy • Carlsbad, NM 88220 575-628-8301 901 Troy King Road • Farmington, NM 87401 505-324-8601 1181 Burgundy Drive • El Paso, TX 79907 915-872-1001

www.clairemontequipment.com 7651 Ronson Road • San Diego, CA 92111 858-278-8351

CLAIREMONT EQUIPMENT 1330 W Mission Road • Escondido, CA 92029 760-739-9100 8520 Cherry Avenue • Fontana, CA 92335 909-429-9100 440 West Aten Road • Imperial, CA 92251 760-355-7700

“WE PU USH EVERYT THING TO O THE LIM MORE RELLIABLE. “How does Komatsuu work for our construction business? First it’ their reliable, qualityy designed and built equipment. W afford downtime, and nd Komatsu’s products a in our book. The support pport we receive from our dealer is outstanding as well. Trraining, parts, financing have experienced p the he best personal p care with Komatsu. They just work best for us!”

Hunter and Clint Shackelford Shackelford Construction truction / Yaazoo City,

81-501 Industrial Place • Indio, CA 92201 760-863-5558

4726 Convoy Street • San Diego, CA 92111 858-278-8338

That t’s s why hy y I am K Koma ma komattsuamerica.com

Page 36 • October 25, 2020 • www.constructionequipmentguide.com • Crawler Loaders, Dozers, Undercarriages & Parts Section • Construction Equipment Guide

Komatsu D155PX-8 LGP Dozer Ideal for Many Applications Komatsu America’s 354 hp low ground extreme service shoes, angle blade, and tow- angle blade, higher capacity 12.9 cu. yd. The ground contact area is increased by 72 pressure dozer, the D155PX-8, incorporates ing winch, the D155PX-8 has a higher oper- bushed semi-u dual tilt and pitch semi-u percent from the standard model for the Komatsu technology used in the ating weight compared to competitors for blades are available. improved floatation in soft ground, and the D155AX-8, enhanced with two blade increased useable drawbar pull with a powDespite its heavier weight, the D155PX- long and wide undercarriage provides better options and more track on the ground. erful towing winch.” 8’s longer and wider track maintains a low stability on slopes and excellent machine With 12 percent wider track gauge, 9 perFor applications that don’t require an ground pressure of only 7.7 psi (53 KPa). balance. The eight fixed mounted track cent longer track on ground and 47 rollers per side distribute the percent lower ground pressure than machine weight. the standard model, the D155PX-8 The ROPS cab provides nearly offers improved performance, unobstructed visibility to both sides floatation and stability, according to of the machine and there are no the manufacturer. external ROPS posts to block the Compared to the standard model, operator’s view. Komatsu’s the D155PX-8’s 8-roller undercarergonomically designed Palm riage provides greater traction and Command Control System (PCCS) optimum balance, while significantgives operators maximum control, ly reducing ground pressure. offering a relaxed posture and Equipped with either large capacity superb fine control, according to the semi-u blade or an angle blade, the manufacturer. D155PX-8 can move large amounts Optional rear attachments include of material, while the wider cutting a counterweight with rigid drawbar edge reduces the number of passes (7,860 lbs.), a hydraulic winch and needed when grading. long drawbar. “The D155PX-8 is excellent for Whether rented, leased or purapplications that require lower chased, the D155PX-8 is covered by ground pressure and can be espeKomatsu CARE for the first three cially useful for energy and pipeline years or 2,000 hours, whichever work,” said Chuck Murawski, prodcomes first. Compared to the standard model, the D155PX-8’s 8-roller undercarriage provides greater traction uct manager, Komatsu America. For more information, visit “When equipped with 38 in. and optimum balance, while significantly reducing ground pressure. www.komatsuamerica.com. 

CHART from page 32

MODEL

CASE

650M LGP 650M LT 650M WT 750M LGP 750M WT 750M LT 850M LGP 850M WT 850M LT 1150M LGP 1150M WT 1150M LT 1650M LGP 1650M WT 1650M XLT 2050M LGP 2050M WT 2050M XLT 2050M LT

ENGINE POWER HP (KW) 68 (50) 68 (50) 68 (50) 92 (66) 92 (66) 92 (66) 112 (84) 112 (84) 112 (84) 127 (95) 127 (95) 127 (95) 150 (112) 150 (112) 150 (112) 214 (160) 214 (160) 214 (160) 214 (160)

WEIGHT LBS. (KG) 16,839 (7,638) 15,803 (7,168) 16,405 (7,441) 21,180 (9,607) 20,679 (9,379) 20,040 (9,089) 22,830 (10,355) 22,330 (10,129) 21,560 (9,779) 32,637 (14,804) 32,174 (14,594) 31,134 (14,122) 39,550 (17,939) 38,650 (17,531) 37,750 (17,123) 48,773 (22,123) 46,891 (21,269) 45,414 (20,599) 44,563 (20,213)

ENGINE TYPE FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5C F5HFL463D*G003 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F5HFL413J*A002 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE413P*A008 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE613F*A002 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE6132 FPT F4HFE613J FPT F4HFE613J FPT F4HFE613J FPT F4HFE613J

MODEL

ENGINE POWER HP (KW)

JOHN DEERE Loaders

655K 655K WH 755K 755K WH

Dozers

450K 550K 650K 700L 700L SG 750L 750L SG 850L 850L SG 850L WH 950K

155 (116) 155 (116) 194 (145) 194 (145)

80 (60) 92 (69) 104 (78) 135 (101) 135 (101) 175 (131) 175 (131) [add] 225 (168) 225 (168) 225 (168) 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 950K SG 280 (209) w/ PAT blade 950K WH 265 (198) w/ OSD blade / 280 (209) w/ PAT blade 1050K 350 (261) 1050K WH 350 (261)

WEIGHT LBS. (KG)

SG: SmartGrade

ENGINE TYPE WH: Waste Handler

40,614 (18,422) 42,120 (19 104) 45,178 (20,492) 50,675 (22 985)

Deere PowerTech PVS 6068 Deere PowerTech PVS 6068 Deere PowerTech PVS 6068 Deere PowerTech PVS 6068

17,510-18,752 (7,959-8,522) 19,758-21,000 (8,981-9,544) 21,320-22,343 (9,691-10,156) 30,900–32,088 (14 016–14 555) 30,900–32,088 (14 016–14 555) 37,569–40,040 (17 041–18 162) 37,569–40,040 (17 041–18 162) 47,578–51,365 (21 581–23 299) 47,578–51,365 (21 581–23 299) 54,086–54,353 (24 533–24 654)

Deere PowerTech PWS 4045 Deere PowerTech PWS 4045 Deere PowerTech PWS 4045 Deere PowerTech PVS 6068 Deere PowerTech PVS 6068 Deere PowerTech PVS 6068 Deere PowerTech PVS 6068 Deere PowerTech PSS 6090 Deere PowerTech PSS 6090 Deere PowerTech PSS 6090

71,250–75,150 (32 325–34 100) 94,300-95,000 (42,800-43,100) 102,700–103,300 (46 600–46 850)

Deere PowerTech PSS 6090 Deere PowerTech PSS 6135 Deere PowerTech PSS 6135

65,300–73,700 (29,606–33,431) 73,700 (33,431)

Deere PowerTech PSS 6090 Deere PowerTech PSS 6090

Construction Equipment Guide • Crawler Loaders, Dozers, Undercarriages & Parts Section • www.constructionequipmentguide.com • October 25, 2020 • Page 37

IN YOU OUR WORLD,

BIG JO OBS NEED BIG MACHINES. E Expect big things ffrom the John Deere 850L Do ozer. Larger and more powerful than the previous K-Series model, m the 850L gives you 10-ppercent more horsepower andd 23-percent more torque for mass eaarthmoving. And with state-off-the-art controls, the usual D Deere arsenal of production-boosting hydrostatic advantages, a SmartGrade™ fully integratedd grade-control option, p and the choice of a Power-Angle-Tilt g (PA AT) or o Outside Dozer (OSD) blaade, yyou’ll have the precision and performance you need to Run Y Your our World. W Stop by or call us today.

PAPÉ MACHINERY

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.papemachinery.com

www.honnen.com

www.doggett.com

Newark 510-790-3600

Rohnert Park 707-584-9161

Sacramento 916-922-7181

Gilroy 408-848-4150

French Camp 209-983-8122

Redding 530-241-4555

Fowler 559-834-4774

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441

St. George, UT 435-652-8003 Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001

Victoria, TX 361-570-6666

Longview, TX 903-758-3326

Alexandria, LA 318-442-0455

Lufkin, TX 936-634-8801

Baton Rouge, LA 225-291-3750

Monroe, LA 318-343-8787

Broussard, LA 337-837-9481

Shreveport, LA 318-631-3090

Covington, LA 985-893-3005

St. Rose, LA 504-466-5577

Lake Charles, LA 337-430-3045

Tyler, TX 903-592-8900

Page 38 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WIN A 1-YEAR LEASE ON AN ALL-NEW MAX-SERIES LOADER ™

When you complete a walkaround of an ASV loader with us, you’ll have a chance to enter to win. Contact us today to schedule an appointment.

Bee Equipment Sales Ltd.

CLM Equipment Co. Inc.

FMI Equipment

www.beeequipmentsales.com

www.clmequipment.com

www.fmiequipment.com

2506 Slaton Highway Lubbock, TX 79404 806-745-1511

3135 US Hwy 90 East Broussard, LA 70518 337-837-6693

4851 E Napoleon Road Sulphur, LA 70663 337-625-5942

2815 N Sam Houston Pkwy E Houston, TX 77032 281-598-2500

11111 E Trent Avenue Spokane, WA 99206 509-927-4071

NO PURCHASE NECESSARY. The Chance to Win an ASV Max-Series Lease Sweepstakes is open to residents of the 50 U.S. & D.C. & Canada, excluding Quebec, who are the age of majority or older and who are owners or operators of businesses in the agricultural, construction and landscaping industries. Void where prohibited. Starts at 12:00:00 AM CT on 8/1/20 and ends at 11:59:59 PM CT on 5/31/21. Odds of winning depend on number of eligible entries received. For how to enter and a copy of the official rules at www.asvi.com/winamax. Sponsor: ASV Holdings, Inc., 840 Lily Lane, Grand Rapids, MN, 55744 © 2020 ASV Holdings, Inc. For more information, visit ASVI.COM.

HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave., Commerce City, CO (303) 287-7506 • (800) 646-6636 Durango, CO • (970) 247-4460 Grand Junction, CO • (970) 243-7090 Ogden, UT • (801) 627-0049 Salt Lake City, UT • (801) 262-7441 St. George, UT • (435) 652-8003 Casper, WY • (307) 266-4474 Cheyenne, WY • (307) 316-9800 Gillette, WY • (307) 685-4288 Rock Springs, WY • (307) 382-5284 Idaho Falls, ID • (208) 523-9915

MORE EEFFICIENT. MORE POWERFUL. Exclusive, three-pump hydraulic c technology for incredibly fast cycle times. Reduced tail swing with a full-sized cab. Ye eah. That’s the ZX345. HitachiCon nstruction.com

TTHIS IRRON W WILL WORK O SMARRTER.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 39

SALES • SERVICE • PARTS • RENTALS

Kaweah Equipment Co. www.kaweahequipment.com 10725 W. Goshen Ave. Visalia, CA 93291 559-733-2982

www.cpower.com 9200 Liberty Drive Liberty, MO 64068 816-781-8070 Wichita, KS 316-943-1231 Great Bend, KS 620-792-1364 Liberal, KS 620-624-7274 Woodward, OK 580-256-6014 Salina, KS 785-825-8291 Colby, KS 785-462-8286

Springfield, MO 417-865-0505 Joplin, MO 417-726-5373 Riverside, MO 816-415-6787 Wichita, KS 316-789-7370 Yukon, OK 405-324-2330 Maryland Heights, MO 314-427-4911 Liberty, MO 806-415-6700

Page 40 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.honnen.com

www.doggett.com

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727 San Juan, TX 956-787-0001 Victoria, TX 361-570-6666

Alexandria, LA 318-442-0455

Lufkin, TX 936-634-8801

Baton Rouge, LA 225-291-3750

Monroe, LA 318-343-8787

Broussard, LA 337-837-9481

Shreveport, LA 318-631-3090

Covington, LA 985-893-3005

St. Rose, LA 504-466-5577

Lake Charles, LA 337-430-3045

Tyler, TX 903-592-8900

Longview, TX 903-758-3326

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 41

Four Seasons Equipment

Porter Group USA

Orion Equipment

8111 Mills Rd. Houston, TX 77064 800-234-5007 Dallas, TX 866-270-1700 www.fourseasons-equip.com

13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.portergroupusa.com

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Page 42 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

World of Concrete Announces New Show Dates for June 2021 Event in Las Vegas After discussions with key stakeholders and feedback at its June 2021 event. AllSecure is Informa’s approach to from industry-leading concrete and masonry associations, ensuring the highest standards of safety, hygiene, cleanliness World of Concrete made the proactive decision to reschedule and quality for operating events for all exhibitors, attendees, WOC 2021 from January to June. speakers and press. “The decision to move the dates back several months was In addition to the safety protocols in place for WOC 2021, not easily reached; however, we felt it was the right choice The Las Vegas Convention Center (LVCC) has been awardfor all involved. WOC will now take place June 8 to 10; edu- ed the Global Biorisk Advisory Council (GBAC) STAR cational offerings June 7 to facility accreditation by 10, at the Las Vegas ISSA, the Worldwide Convention Center,” accordCleaning Industry ing to the organizers. Association. The GBAC “We have a commitment to “We have a commitment program is considered the to our exhibitors and atten- our exhibitors and attendees to gold standard for safe dees to provide a valuable facilities, and was and productive face-to-face provide a valuable and productive designed to control the experience at WOC each risks associated with year,” said Jackie James, face-to-face experience at infectious agents, includgroup director, World of WOC each year.” ing COVID-19. Concrete. World of Concrete also “This is the first time in is one of the first largeJackie James our 46-year history we have scale events to occupy The World of Concrete been faced with circumLas Vegas Convention stances that have caused us Center’s $980 million to reschedule the event. We West Hall expansion in feel the new June dates will provide everyone with the nec- June, which will add 1.4 million sq. ft. of space to the existessary time to plan effectively, and allows us to reimagine ing 3.2 million sq. ft. campus. In addition to the exhibit hall, WOC for a different time of the year. Moving the event from the expansion will feature a striking outdoor plaza, a grand Winter to late Spring this year will allow for additional out- atrium and modern design and technology. door activities everyone can enjoy in the great city of Las World of Concrete will continue to post updates on its Vegas, including top-notch exhibits, new product demos and website over the next few months. Registration for WOC exciting spectator events.” 2021 will open online in early 2021. World of Concrete will adapt the Informa AllSecure Plan For more information, visit www.worldofconcrete.com. 

Thunder Creek Adds Lea as Sales Veep Thunder Creek Equipment and its parent company, LDJ Manufacturing, have hired Larry Lea, the former director of sales of Mahindra USA, as the organization’s new vice president of sales. Lea, who has spent his entire career in the agriculture and heavy equipment sales market, will manage the organization’s decentralized national sales team, while also working with the company’s product, production and engineering teams to help lead strategic product development and growth. During his time with Mahindra, Lea managed a team of nearly 30 sales leaders across North America accounting for $500 million in revenue. In addition to working closely with the team to reach sales and growth goals, Lea also was integral in launching inventory process improvement programs and developing various incentive programs for wholesale customers.

Larry Lea

“We’re excited to welcome Larry to the Thunder Creek team, where he can apply his extensive industry experience to strengthen both our sales team and our dealer network,” said Loren Van Wyk, owner and chief executive officer

of Thunder Creek. “He’s a proven winner who is motivated to use his competitive nature to drive us forward in both the agricultural, construction and commercial markets.” Lea will work directly with Thunder Creek’s sales team and dealer network to broaden Thunder Creek’s market penetration across the industries where its products are used. “I think my experience and competitive nature will make what is already a strong sales team even stronger and more strategic,” Lea said. “The reality is that when the sales team wins, the entire company wins, and so do our customers. I’m ready to do a whole lot of winning at Thunder Creek long into the future.” Lea will remain based in Houston, Texas. For more information, visit www.ThunderCreek.com. 

CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121

FOUR SEASONS EQUIPMENT, INC. www.fourseasons-equip.com 8111 Mills Rd., Houston, TX 77064 • 800-234-5007 Dallas TX • 866-270-1700

NUECES POWER EQUIPMENT www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-289-0066 Laredo, TX • 956-725-0066 San Antonio, TX • 210-310-0066 San Benito, TX • 956-361-0066 Victoria, TX • 361-576-0066 El Paso, TX • 915-541-0066

PORTER GROUP USA www.portergroupusa.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368

MECOM EQUIPMENT www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135

JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181

R & S INDUSTRIES, INC. www.rsindinc.com 951 CR G, Clovis, NM 88101 575-769-8659

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 43

The Right Measure Of Performance And Value Built for heavy-duty applications, Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and unmatched value. Up to 5% greater productivity* Up to 10% more fuel-efficiency* 3-year or 3,000-hour warranty

Get the EDGE Lease on a 4.3 yd3 HL960 for as low as

$2,510 per month†

High-performance bucket Wider opening, curved side plates and enhanced spill guard ensure maximum capacity and reduced material loss.

Standard onboard weighing system Accurate load-weight monitoring improves production management.

Hyundai’s Hi-Mate® telematics Track and monitor your new Hyundai loader free for five years.

More standard features. More value.

www.hceamericas.com

*Compared to Hyundai 9A series. †Payment based on 1,000-hours, 60-month Edge Lease for standard configuration HL960. Payments may vary based on option selection and final invoice total.

Page 44 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer: ARNOLD MACHINERY CO. www.arnoldmachinery.com

Salt Lake City, UT

Sparks, NV

801-972-4000

775-356-1511

Idaho Falls, ID

Las Vegas, NV

208-523-0822

702-642-9000

Meridian, ID

Phoenix, AZ

208-887-6000

602-414-1900

Twin Falls, ID

Tucson, AZ

208-733-1715

520-294-7677

SIERRA MACHINERY, INC. www.sierraelpaso.com

El Paso, TX

Artesia, NM

915-772-0613

575-746-6592

ROMCO EQUIPMENT CO. www.romco.com

Austin

Ft. Worth

Round Rock, TX 512-388-2529 877-851-1026

Ft. Worth, TX 817-626-2288 866-966-4602

Buffalo

Houston

Buffalo, TX 903-322-5602

Houston, TX 713-937-3005 800-865-6998

Carmine Carmine, TX 979-278-3570

Corpus Christi

Longview Longview, TX 903-758-5576

Corpus Christi, TX 361-881-4891

Rio Grande Valley

Dallas

Mercedes, TX 956-565-0100

Carrollton, TX 214-819-4100 800-227-6626

San Antonio San Antonio, TX 210-648-4600 800-966-4601

PACWEST MACHINERY www.PacWestMachinery.com

Spokane Valley, WA 509-534-5933

Portland, OR

Eugene, OR 541-302-3762

Kent, WA 206-762-5933

503-252-5933

VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com

Bakersfield, CA 661-387-6090

Corona, CA 951-277-7620

Fresno, CA 559-834-4420

Sacramento, CA 916-504-2300

Lakeside, CA 619-441-3690

San Leandro, CA 510-357-9131

Turlock, CA 209-410-6710

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 45

WORLD’S SMALLEST BACKHOE NOW WITH TRACKS – JCB-1CXT

Max Dig Depth: 10 ft 1 in / Gross Engine Power 49 HP / Loader Bucket Breakout: 1,466 lb JCB 1 CXT, a TRACKED BACKHOE is a versatile machine, offering skid-steer and mini excavator performance in one package. The 1CXT provides superior maneuverability, an optional handheld tool auxiliary, as well as a universal quick hitch that is compatible with most of your skid steer attachments. Standard full cab with integrated heating & air-conditioning. Due to its compact size and under 10,000 lbs weight, the 1 CXT is easy to tow in a trailer without a CDL (where local regulations allow). NO DPF / DEF AFTERTREATMENT. Operators environment friendly with easy to use controls and all daily checks and greasing can be carried out at ground level on a JCB backhoe. To learn more about JCB 1CXT, visit www.jcb.com/en-us/products/backhoe-loaders/1cxt

935 E South Loop Stephenville, TX 76401 254-965-6783 877-207-8782 1841 N US Hwy 286 Decatur, TX 76234 940-965-6783 www.hendershotjcb.com

461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON 5050 East 58 Avenue Commerce City, CO 80022 720-386-6038 www.ProConJCB.com

/ /JCBNA

2935 Lincoln Road Las Vegas, NV 89115 702-432-2200 www.swjcb.com

@JCBNA

2240 W. Buckeye Road Phoenix, AZ 85009 602-761-2525 www.flaskajcb.com

w w.jcb.com .jcb.com JCBNA www

Cisco Equipment 620 N. Bell Street San Angelo, TX 76903 800-496-0271 www.cisco-equipment.com

Terms & Conditions: Pictures shown with optional accessories. For towing policy please consult with your local state transportation office. Offers may change without notice and may not be combined. Additional terms and conditions may apply, please contact your local JCB dealer for details. JCB dealer reserves the right to withdraw, alter or decline any product from sale or any offer without prior notice. Price, if shown, does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected.

Page 46 • October 25, 2020 • www.constructionequipmentguide.com • cOnSTRUcTIOn eQUIPmenT gUIDe

Federal Approval Gives Texas Central High-Speed Rail Life, $20B Price Tag RAIL from page 1

Kirby-Smith Machinery www.kirby-smith.com

Webuild Chief Executive Pietro Salini. “Webuild's unique track record, especially in high-speed rail, will see us apply our expertise to this project that is important for sustainable mobility. As leaders of the design and build work, we are honored to have been given this unique opportunity to build a highspeed railway in Texas.” The two decisions are a crucial milestone for the start of work on the project, whose total investment is approximately $20 billion — an estimated $14 billion of which is for the civil works — will prove to be very important for Texas, especially in job creation. It is forecast to bring an estimated $36 billion in economic benefits during the next 25 years. The immediate impact is estimated to be more than $10 billion in the U.S. Construction, which Texas Central aims to start as soon as possible to help with the economic recovery following the COVID-19 crisis, and will lead to the creation of 17,000 direct jobs during the first six years of construction and more than 20,000 indirect jobs. Webuild brings its expertise in building megaprojects throughout the world with a track record of 8,473 mi. of rail and metro lines gained over the span of 114 years. The civil engineering work on the new high-speed railway between

Dallas and Houston includes the design and construction of the viaduct and embankment sections along the entire route, the installation of the track system and the alignment and construction of all the buildings and services that will house maintenance and other equipment. The railway, which will be 235.5 mi. long, will transform mobility between the two cities. It will be based on Central Japan Railway's Tokaido Shinkansen system, one of the world's safest mass transportation systems. It will carry travelers between Dallas and Houston — with a stop at Brazos Valley near the Texas A&M University — in 90 minutes, with departures every 30 minutes during peak hours and every hour during off-peak times. It is expected to be 90 minutes faster than car travel and one hour faster than air travel. Texas Central and its partners are committed to the Business and Workforce Opportunity programs, created to ensure a highly skilled workforce and promote the growth of small, rural, minority, woman, veteran and disabled individual-owned businesses in Texas by offering fair and competitive opportunities to bid and participate in building and operating the railway. 

6715 W. Reno Ave Oklahoma City, OK 73127 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 800-375-3733

Amarillo, TX 800-283-1247 Lubbock, TX 866-289-6087 Odessa, TX 877-794-1800

Abilene, TX 877-577-5729

Tri-West Tractor, Inc. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

Ditch Witch of East Texas The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! call company Wrench for Sizes & Pricing 21-22 EB call 866-294-6103

OVERSTOCK CAnCEllEd lARgE OVERSEAS ORdER. BLOW OUT, SeLLIng BeLOW mAnUfAcTURIng cOSTS! WAS $2,990 nOW $1,990 SEVERE SERVICE ASPHAlT CUTTER Attachments International call 218-863-6444 21-22 AP

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

www.witchequipment.net 7717 Highway 69 Tyler, TX 75706 903-592-6226

Ditch Witch of Arizona www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351 Tucson, AZ 520-579-0261

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 47

Waukesha-Pearce Industries, Inc.

Garton Tractor Inc.

Power MotiveCorporation

www.wpi.com

www.gartontractor.com

www.powermotivecorp.com

12320 South Main St. Houston, TX 77035 713-551-0506 Tomball, TX 281-351-9016 Corpus Christi, TX 361-884-8275 San Antonio, TX 210-648-4444

Beaumont, TX 409-721-5305 Edinburg, TX 956-386-0107 Austin, TX 512-251-0013 Buffalo, TX 903-322-7150

4088 Russell Road Fairfield, CA 94534 707-425-9545 Santa Rosa, CA 707-586-1790 Ukiah, CA 95482 707-468-5880

DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

Milliken 970-587-1188

Colorado Springs 719-576-5541

Cheyenne 307-634-5149

Grand Junction 970-241-1550

Durango 970-259-0455

Nueces Power Equipment www.nuecespower.com 4697 FM 1516 N Converse, TX 78109 210-310-0066 7667 N Sam Houston Pkwy Humble, TX 77396 713-247-0066

Page 48 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FMI Equipment www.fmiequipment.com 11111 E Trent Avenue Spokane, WA 99206 509-927-4071

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. OCTOBER/NOVEMBER 2020 CRANE SAFETY COURSES NEW LOCATIONS! REGISTER TODAY! October 26 – October 30, 2020 Mobile Crane Train The Trainer, Orlando, FL October 26 – October 30, 2020 Overhead Hoist Maintenance Training, Houston, TX November 2 – November 5, 2020 Mobile Crane Inspector Training, Las Vegas, NV November 3 – November 6, 2020 Overhead Crane Inspector Training, Atlanta, GA November 3 – November 6, 2020 Overhead Crane Train The Trainer, Orlando, FL November 9 – November 13, 2020 INSPECTOR CERTIFICATION COMBOS (Combo A), Orlando, FL November 10 – November 12, 2020 Boom Truck Operator Train The Trainer, Cincinnati, OH November 16 – November 17, 2020 Qualified Signal Person Training, Orlando, FL November 16 – November 20, 2020 INSPECTOR CERTIFICATION COMBOS (Combo A), Houston, TX November 18 – November 19, 2020 Critical Lift Planning & Lift Director Training, Orlando, FL November 23 – November 25, 2020 Aerial Work Platform Train The Trainer, Houston, TX To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE) ASCE 2020 Virtual Convention Dates: October 28–30, 2020 Times: 11:00 a.m. – 5:00 p.m. ET Description: The American Society of Civil Engineers’ (ASCE) Convention is the Society’s premiere membership event. It is the single annual opportunity where the entire Society joins together reflecting the diversity that ASCE encompasses. The Convention program is designed to have integrated, multi-disciplinary, technical, and educational components to meet the needs of the profession. Top Reasons to Attend ASCE 2020 Convention: • Learn from top leaders in the industry through special plenary sessions, panels, and technical sessions. • Learn about ASCE's new initiative, Future World Vision; why it was created and what the plans are for its future. • Earn Professional Development Hours (PDHs) to maintain your professional licensure while gaining relevant focused knowledge. • Visit virtual exhibitors to find the latest tools and techniques. • Enjoy ASCE Convention 2020 from the comfort of your own desk. To learn more about this event or to register, visit https://convention.asce.org/registration. For questions contact registrations@asce.org, or call +1 (800) 548-2723 or +1 (703) 295-6300 and ask to speak with a registration ASCE Customer Service representative.

weather is not only protected from damage from freezing temperatures, but also meets or exceeds durability requirements for the intended service conditions. We will discuss ways to ensure concrete placed during cold weather achieves the desired strength in a short timeframe while also minimizing the extra costs associated with cold-weather concreting using some simple and inexpensive tools. Citing real-world examples, topics such as heated aggregates, embedded temperature and maturity sensors, protection measures, and air-entrainment will be explored, all with a focus on durability. As well as understanding what you have to do to place non-air-entrained concrete and the risks involved. ACI webinars are delivered by industry experts and feature popular concrete topics. The webinars and attendance certificates are administered through ACI University. They are also recorded for viewing at a later date. Both live and recorded versions offer continuing education credit. For additional information contact Bob Hogston, American Concrete Institute, 38800 Country Club Dr Farmington Hills 48331. http://www.concrete.org Email: bob.hogston@concrete.org Phone: (248) 848-3831 Fax: (248) 848-3701

ASSOCIATED GENERAL CONTRACTORS (AGC) AGC Joint Contractors Virtual Conference Dates: November 10–12, 2020 Description: The AGC Joint Contractors Conference brings together AGC’s Highway and Utility Contractors Conference and Buildcon virtually. Each conference will have its own education sessions AMERICAN CONCRETE INSTITUTE (ACI) Webinar: Creating Durable Concrete in Cold Weather but several keynote sessions will include participation from all three AGC Contractor Divisions – Highway & Dates: November 3, 2020 Transportation, Utility Infrastructure, and Building. This Dates: 1:00 PM EST - 2:00 PM EST Description: For decades, the Cold Weather committee is an opportunity to learn about issues in your own marat ACI has been focused on creating guidelines for con- ket areas but also to network with contractors involved tractors to employ so that concrete placed during cold in other markets.

Member Rate: $350 Non-member Rate: $450 Registration is open for this event at https://agc-jointcontractors-virtual-conference.heysummit.com/. For registration information or questions contact Associated General Contractors of America at, www.agc.com or (703) 548-3118. AUTODESK Autodesk University 2020 Virtual Conference Dates: November 17–20, 2020 Description: Join us starting November 17 for a global digital event that brings together innovators from around the world—designers, engineers, builders, creators—to explore new ways of imagining, designing, and making. At AU 2020, you’ll learn alongside your peers in architecture, engineering, construction, manufacturing, and media and entertainment as you discover emerging technologies and trends to help you achieve your new possible. You’ll have full access to a wide variety of session types, including expert-led classes, class Q&As, roundtables, and more. AU 2020 is a multi-day interactive digital experience kicking off with eight hours of continuous live programming on Day One. For the rest of the week, join your community for live and on-demand classes, events, and activities. AU 2020 is a FREE digital event, and while registration is required, class enrollment isn’t necessary. Class attendance is limited only for roundtables, which are firstcome, first-served. To learn more about this event or to register, visit https://www.autodesk.com/autodesk-university/conference/overview. For information about AU 2020, including opportunities for speakers and sponsors, contact us! Phone: 650-416-8692, Fax: 512-813-2402 or Email: au.info@autodeskuniversity.com.

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 49

/ 8 -0 0,0, /& &8 -0 4 ".& .& ( 3& "& 5 25 6" -* 5: 4 " ( 3 " 2 6 "-* 5:

Ditch Witch of Oklahoma/Tulsa

Vermeer Texas-Louisiana

www.ditchwitchok.com

www.vermeertexas.com

Oklahoma City, OK 73034 405-348-4633

Baton Rouge, LA 225-665-7900

Houston (Cypress), TX 281-671-6000

Tulsa, OK 74116 918-438-1560

Irving, TX 972-255-3500

Kilgore, TX 903-988-9868

Page 50 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@EQUIPMENT-ANDPARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F PLEASE. EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADER; LOOKING TO BUY CAT 966F 2 ANY CONDITION, LET ME KNOW. EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS PLEASE QUOTE ME, IF YOU HAVE ANY SURPLUS EQUIPMENT. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR EXCAVATORS – WHEEL LOADERS, GRADERS, ALL MODELS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. ––––––––––––––––––––––––––––––––

WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLARAME EXCAVATORS, ALL MODELS. LOOKING TO BUY USED CONTRACTION WITH WHOLESALE. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU EXCAVATORS, ALL MODELS. LOOKING TO PURCHASE ANY HEAVY EQUIPMENT OR TRUCKS! EMAIL: JDLANDWORXEQ@GMAIL.COM; PHONE: 910-585-1608 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAS AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS. ALSO WE BUY OLD CAT MACHINES. EMAIL: USA@GCESEQUIPMENT.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 988A WHEEL LOADER. I SEEK TO PURCHASE A CAT 988A THAT IS IN WORKING ORDER, WITH GOOD TIRES AND A BUCKET WITH TEETH. EMAIL JIMTHORNTON@STNY.RR.COM OR CALL 607-483-2383. ––––––––––––––––––––––––––––––––

WANTED (PA): FORD F250 SUPER DUTY PICKUP TRUCK, WITH 6.4 DIESEL, ANY CONDITION. EMAIL HARLOWCONTRACTING@YAHOO.COM OR CALL 267-738-5984. –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS OF CATERPILLAR CRAWLER LOADERS OR ANY USED CONSTRUCTION EQUIPMENT WITH WHOLE SALE PRICE. EMAIL AMERICAUSEDEQUIPMENT@ GMAIL.COM OR CALL 657-236-7504. –––––––––––––––––––––––––––––––– WANTED (PA); GARWOOD 75B CRANE, ANY CONDITION OR ANY ATTACHMENTS. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): KOEHRING 1066 EXCAVATOR, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE 860 SCRAPER TRANSMISSION, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): AKERMAN MOTOR GRADERS, ALL MODELS. PLEASE LET US KNOW IF YOU HAVE ANY MACHINE LIKE THIS (WORKING OR NON). EMAIL: HIEEQUIPMENT@GMAIL.COM; PHONE: 775-235-8837 –––––––––––––––––––––––––––––––– WANTED: 3-AXLE, HEAVY DUTY LOW BOY TRAILER FOR HAULING A CAT 963. EMAIL: BENHOOVER@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CT): CASE 1455B CRAWLER LOADER. EMAIL: HENRYINDUSTRIES@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (IL): NEED MANUALS AND PARTS FOR 1970 BARBER-GREENE TF-30 DRAINAGE TRENCHER (TILING MACHINE). EMAIL: JL.FOMAC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 ––––––––––––––––––––––––––––––––

WANTED (CA): BOBCAT T550 COMPACT TRACK LOADER. EMAIL: CINDYLARK4@MSN.COM –––––––––––––––––––––––––––––––– WANTED (PA): REXWORKS INC MAXIGRIND 425 GRINDER. EMAIL: HENRYINDUSTRIES@YAHOO.COM; PHONE: 814-371-8010 –––––––––––––––––––––––––––––––– WANTED (PA): FORD F700 HOOK LIFT TRUCKS - WORM GEAR AND SHAFT ASSEMBLY FOR COMPACT MODEL H-L SIDE-O-MATIC BOOM UNLOADER COMPACT 2 7-63-5C DICO CONTINUOUS SERIES. EMAIL: INFO@LESNEYCONCRETE.COM PHONE: (724) 224-8703 –––––––––––––––––––––––––––––––– WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR D8R CRAWLER DOZER. LOOKING FOR ORIGINAL 2018 D8R CATERPILLAR BULLDOZER. EMAIL: ARABHURUR@GMAIL.COM; PHONE: +251-911513133 –––––––––––––––––––––––––––––––– WANTED (SC): ALL MODELS BRADCO TRENCHING / BORING / CABLE PLOWS; LOOKING FOR 3 PT HITCH 3 OR 4 FOOT TRENCHER 6" WIDE FOR REAR KUBOTA EMAIL: PEPPERJACKPM@YAHOO.COM; PHONE: 803-460-2600 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR EXCAVATORS. LOOKING FOR USED AMPHIBIOUS EXCAVATORS, MARSH BUGGIES AND MARSH MASTERS - ANY BRAND. ALSO LOOKING FOR BROKEN/DAMAGED LR BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): INGERSOLL RAND AIR COMPRESSOR, MODEL 125 CFM. NEED EXHAUST/INTAKE MANIFOLD FOR A CONTINENTAL G193A GAS ENGINE WHICH IS IN THE I/R GYRO FLOW 125 COMPRESSOR. EMAIL: HFINCHTTD@FONTIERNET.NET ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 51

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

• Great Lakes Regional Event December 15 - 16, 2020

• Syracuse, NY Wed., October 28, 2020 For: Real Estate/Construction Accessories

• Northeast Regional Event December 16 - 17, 2020

• ONLINE ONLY Thurs., October 29, 2020 For: Late Model Construction Equipment (Mexico) • Parkersburg, WV Fri., October 30, 2020 For: Year End Late Model Construction Equipment • TIMED AUCTION Oct. 31 – Nov. 5, 2020 For: Year End Late Model Construction Equipment (NY) • Baton Rouge, LA Oct. 31 – Nov. 6, 2020 For: Late Model Rental Fleet Equipment Timed Auction • Attleboro, MA Sat., November 7, 2020 For: Large Auction, Bucket & Digger Trucks and more • Spencer, IA Sat., November 14, 2020 For: Retirement Auction, Construction & Farming RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

• Chehalis, WA December 16, 2020

• Great Plains Regional Event December 17 - 18, 2020 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Online/Sacramento, CA Sat., November 14, 2020 For: Monthly Public Auction • Online/Woodburn, OR Fri., November 20, 2020 For: Monthly Public Auction

• Rocky Mountain Regional Event December 2 - 3, 2020

• ONLINE ONLY October 27, 2020

• ONLINE ONLY October 26 - 28, 2020 For: Truck & Construction Auction

• ONLINE ONLY November 3, 2020 • ONLINE ONLY November 10, 2020 • ONLINE ONLY November 17, 2020 • ONLINE ONLY November 24, 2020

BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY October 28, 2020 • ONLINE ONLY November 4, 2020 • ONLINE ONLY November 11, 2020 • ONLINE ONLY November 18, 2020

• Atlanta, GA December 3, 2020 • Edmonton, AB December 7 - 8, 2020 • Fort Worth, TX December 8 - 9, 2020 • Sacramento, CA December 9, 2020 • Williston, ND December 10, 2020 • Southwest Regional Event December 10 - 11, 2020 • Montreal, QC December 10 - 11, 2020 • Nashville, TN December 11, 2020

FREY & SONS, INC. www.freyandsons.com 419-455-3739

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252

• ONLINE ONLY December 8, 2020

• Grande Prairie, AB November 23 - 25, 2020

• Madison, IN Tues., October 27, 2020 For: 2020 Fall INDOT Auction

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• Houston, TX November 10 - 11, 2020

• Tipton, CA November 20, 2020

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• New Paris, IN Thurs., October 29, 2020 For: Retirement Auction for McKibbin Excavating LLC

• ONLINE ONLY December 1, 2020

• Phoenix, AZ November 18, 2020

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• Online/Sacramento, CA Sat., December 12, 2020 For: Monthly Public Auction

All our auctions are now online bidding only!

• Orlando, FL November 12, 2020

Coming Auctions

BUNCH BROTHERS AUCTIONEERS www.bunchbrothersauctioneers.com 270-376-2992

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., December 11, 2020 For: Trucks, Trailers & Equipment Consignment Auction I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE ONLY Wed., October 28, 2020 For: Heavy Equipment, Trucks, Trailer & Misc. Auction IRON AUCTION GROUP www.ironauctiongroup.com 864-546-1216 • Princeton, WV Tues., October 27, 2020 For: Unreserved Construction Equipment & Truck Auction J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163

• Caneyville, KY October 29 - 30, 2020 For: 2-Day Absolute Estate Auction

• TIMED ONLINE ONLY October 23 - 28, 2020 For: Online Auction for Shrewsbury, MA

COMMOMWEALTH OF PA govplanet.com 855-464-4842

• TIMED ONLINE ONLY Oct. 30 – November 4, 2020 For: Online Auction for Plymouth Meeting, PA

• ONLINE ONLY Wed., November 4, 2020 For: PennDOT Annual Heavy Equipment Auction

• Concord, NC November 11 - 12, 2020 For: Live 2-Day Event w/ Online Bidding

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

• ONLINE ONLY Tues., October 27, 2020 For: Virtual Live Farm & Construction Equipment

• TIMED ONLINE ONLY November 6 - 11, 2020 For: Upper Midwest Locations • TIMED ONLINE ONLY November 20 - 25, 2020 For: Upper Midwest Locations

• TIMED ONLINE ONLY Wed., December 2, 2020 For: Online Auction for Riviera Beach, FL

• ONLINE ONLY Tues., November 3, 2020 For: Virtual Live Farm & Construction Equipment

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311

• ONLINE ONLY December 3 - 10, 2020 For: Steffes Construction Consignment Auction

• ONLINE ONLY October 21 - 28, 2020 For: Anderson Rock & Demolition Pit Auction

• ONLINE ONLY Tues., November 10, 2020 For: All City Equipment, Inc Auction

• ONLINE ONLY December 4 - 9, 2020 For: Timed Online Upper Midwest Locations

• ONLINE ONLY October 22 - 29, 2020 For: Decorative Bark Products, Inc & Grit Equipment LLC • ONLINE ONLY December 9 - 16, 2020 For: Construction Equipment, Log Home Mfg. & Rolling Stock JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY October 21 - 27, 2020 For: Absolute Farm Liquidation Auction – Monroe, GA

NITKE AUCTION CENTER (A Hanson Auction Group Company) www.nitkeauctions.com 715-693-4447 • Mosinee, WI October 30 - 31, 2020 For: Wisconsin Contractors 2-Day Fall Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Tues., October 27, 2020 For: Kansas DOT Auction

• ONLINE ONLY Wed., October 28, 2020 For: Industrial Auction

• ONLINE ONLY Wed., October 28, 2020 For: Vehicles & Equipment Auction

• ONLINE ONLY Oct. 28 – November 3, 2020 For: Aviation Online Auction

• ONLINE ONLY Thurs., October 29, 2020 For: Construction Equipment

• Cincinnati, OH Thurs., October 29, 2020 For: Southern OH Heavy Construction, Aggregate & Truck Sale

• ONLINE ONLY Thurs., October 29, 2020 For: Panhandle Construction Services Inc Retirement Auction

• ONLINE ONLY Tues., November 17, 2020 For: Farm Estate Liquidation Auction • Brooklyn, MS November 13 – 14, 2020 For: Two Day Construction & Transportation Public Auction • Taylor, MI Thurs., November 5, 2020 For: Absolute Retirement Auction Gary’s Trucking Inc. & others • ONLINE ONLY Tues., December 1, 2020 For: Job Site Housing Auction

• ONLINE ONLY Tues., November 3, 2020 For: Government Auction • ONLINE ONLY Tues., November 10, 2020 For: Northline Construction Retirement Auction RTI AUCTIONS www.teitsworth.com 585-243-1563 • ONLINE ONLY October 23 - 27, 2020 For: Steuben County NY Municipal Surplus NetAuction

• Ashland, OH Wed., December 2, 2020 For: NE Ohio Contractor Auction

STEEVES & COMPANY www.steevesco.com 585-381-1710

• Pelzer, SC Thurs., December 10, 2020 For: East Coast Winter Public Auction

• ONLINE ONLY October 27 - 29, 2020 For: Patrick Concrete Constructors, Inc. Public Auction

• West Fargo, ND Wed., December 2, 2020 For: AgIron Event

• Mt. Pleasant, IA Wed., December 16, 2020 For: AgIron Event • ONLINE ONLY December 18 - 23, 2020 For: Timed Online Upper Midwest Locations VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Live Virtual Auction Sat., November 14, 2020 For: November 2020 Auction • Live Virtual Auction Sat., January 23, 2021 For: January 2021 Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Only & Absentee Only Fri., December 11, 2020 For: Public Construction Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., November 14, 2020 For: Live Public Auction • Virtual Online Sat., December 12, 2020 For: Live Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Houston, TX Wed., October 28, 2020 For: Heavy Equipment Auction • Kissimmee, FL Thurs., November 12, 2020 For: Heavy Equipment Auction • Elizabeth, PA Thurs., November 19, 2020 For: Retirement Auction EESI

Page 52 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Buying or Selling? Call any of these professional auction companies

Why Use Iron Bound? That’s easy... It’s SIMPLE and EFFECTIVE! We’ll market and sell your equipment, get top dollar for you and we’ll take the hassle out of the process. A Strategic As sset Managemen nt Full Service e Auction House vantageauctions.c com

951.228.90040

THE T TIME IS NOW W

Conveniently located for sellers in the Permian Basin, West Texas, the Panhandle & New Mexico.

Address: Iron Bound Solutions LLC 750 US HWY 180 Seminole, TX 79360 Phone: 432-209-5112

Jeff Martin Auctioneers Heads to Florida for Truck Sale Jeff Martin Auctioneers Inc. is headed back to the Kissimmee, Fla., auctions for its fourth year, selling from its auction trucks on Feb. 8 to 11, 2021. The auction features heavy construction and farm equipment, trucks, trailers, cranes, vehicles, attachments, support equipment and more. “We have an experienced sales team that will help you navigate the selling process, and Jeff Martin Auctioneers has several selling options that we can tailor to your needs,” the company said. “We strive to make everything as simple as possible for our clients. List your items now for maximum marketing exposure. We have ready and able buyers from all 50 states and 46 foreign countries. “We look forward to seeing you in person or online at our 2021 Kissimmee, Fla., auction.” For more information on Jeff Martin Auctioneers, visit jeffmartinauctioneers.com/. 

Jeff Martin Auctioneers has an experienced sales team that will help you navigate the selling process.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 53

Page 54 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT....................................................................2

NPK CONSTRUCTION EQUIPMENT INC.......................................9

AFE ...................................................................................................2

RITCHIE BROS. AUCTIONEERS...................................................55

ASV .................................................................................................38

ROADTEC INC................................................................................19

BARGAINS ......................................................................................46

SAKAI AMERICA INC......................................................................21

BELL TRUCKS AMERICA INC .......................................................41

TAKEUCHI ..................................................................................46,47

BOMAG AMERICAS INC ................................................................27

TORO...............................................................................................48

CALVIN GROUP INC ......................................................................12

TROPHY TRACTOR .......................................................................14

CARLSON PAVING PRODUCTS INC............................................20

VANTAGE AUCTIONS ....................................................................52

CEG AUCTION................................................................................52

VOLVO COMPACTION ...................................................................20

CEG SCALE MODELS....................................................................15

VOLVO CONSTRUCTION EQUIPMENT .......................................44

COMMERCE TRUCK & EQUIPMENT SALE...................................5

WACKER NEUSON ........................................................................39

CONSTRUCTION EQUIPMENT GUIDE................................6,50,53

WIRTGEN AMERICA ......................................................................23

DOMINION EQUIPMENT PARTS...................................................33

YANMAR AMERICA CORP.............................................................49

DRESSTA NORTH AMERICA.........................................................31 DYNAPAC...................................................................................28,29

CALIFORNIA SUPPLEMENT

ECCO EQUIPMENT........................................................................13

BAR NONE AUCTION.......................................................................1

FLANGE LOCK..................................................................................7

CALIFORNIA CAT GROUP...............................................................3

HENDRIX MACHINERY LLC............................................................3

CONSTRUCTION EQUIPMENT GUIDE ..........................................7

HITACHI EXCAVATOR ....................................................................38

GARTON TRACTOR INC..................................................................9

HYDREMA US INC............................................................................7

JCB CALIFORNIA ...........................................................................12

HYUNDAI CONSTRUCTION EQUIPMENT ..............................42,43

PIRTEK CALIFORNIA .....................................................................11

IEDA .................................................................................................11

SCOTT EQUIPMENT - FONTANA ...................................................2

IRON BOUND AUCTIONS..............................................................52

WESTERN RENTALS .......................................................................9

JCB INC ...........................................................................................45 JFW EQUIPMENT INC ...................................................................24

PACIFIC NORTHWEST SUPPLEMENT

JOHN DEERE..................................................................................37

CASCADE TRADER........................................................................11

JOHN DEERE SKID STEER ..........................................................40

CONSTRUCTION EQUIPMENT GUIDE ..........................................9

KIRBY-SMITH MACHINERY INC....................................................56

JAMES G MURPHY CO....................................................................1

KOMATSU AMERICA CORP .....................................................34,35

LANDMARK EQUIPMENT ................................................................7

LEEBOY...........................................................................................25

MODERN MACHINERY....................................................................5

MAGELLAN CONSTRUCTION.......................................................17

OREGON TRACTOR ........................................................................3

MAULDIN PAVING PRODUCTS.....................................................26

ORION EQUIPMENT ......................................................................12

N C MACHINERY..............................................................................2

TRIAD MACHINERY .........................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 25, 2020 • Page 55

Unreserved public equipment auctions

Equipment Financing by equipment experts.

2 – 2011 Grove RT700E 60 Ton | Houston

2 – Komatsu HM300-2 | Houston

2011 Mack GU713 | Houston

Mantis 14010 70 Ton | Orlando

2 – Caterpillar D8T | Houston

3 of 5 – 2014 Komatsu PC360LC-10 | Houston

Terex HC275 275 Ton | Houston

2014 Link-Belt HTC8675 75 Ton 8x4x4 | Tipton

1 of 3 – 2017 Sany SY215 | Orlando

45,975+ items in 115+ auctions including Houston, TX Nov 10–11 Orlando, FL Nov 12 Phoenix, AZ Nov 18 Tipton, CA Nov 20 Rocky Mountain Regional Event Dec 2–3 Atlanta, GA Dec 3 Fort Worth, TX Dec 8–9

Sacramento, CA Williston, ND Southwest Regional Event Nashville, TN Great Lakes Regional Event Northeast Regional Event Great Plains Regional Event

Dec 9 Dec 10 Dec 10–11 Dec 11 Dec 15–16 Dec 16–17 Dec 17–18

IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only. For the most up-to-date information visit rbauction.com/covid-19

Financing & leasing available

Online bidding information

Up to 100% financing, with no money down.

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

More items added daily Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com

Auction Company License # 1981, Motor Vehicle Dealer License #1539, Motor Vehicle Dealer License #DLR25867, Auctioneer Steve A Seykora # 74-19-006, Auction Firm # 2008000166, Auctioneer Kevin L. Perry # 2002000227, Auctioneer Chad M. Johnson # 17668, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Auctioneer James L. Valentine #5623, Auctioneer Kevin L. Perry # 2763, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865

Page 56 • October 25, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE