Western 21, October 10, 2021 by Construction Equipment Guide

$3.00

Published Nationally ®

Western Edition

October 10 2021 Vol. XXII • No. 21

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Contractor Crews Clean Up Trai l Derailment...8

Intel Br eaks Ground On $20B Ariz. Factor y...11

Coverage on page 46 Flatiron Construction is the general contractor for the Caltrans $480 million project — known as Fix50 — in Sacramento County.

AUSA Grows U.S. Market for Unique Compact Equipment..32

Table of Contents ................4 Aggregate & Recycling Section..........................21-28

Net-Zero Arrives: e-Revolution Picks Up Steam Off-Highway Manufacturers Are Adopting New Technology for Greener, Carbon-Free Job Sites

Attachments & Parts Section ......................................35-41

By Lucy Perry CEG CORRESPONDENT

Truck & Trailer Section ........ ......................................51-53 Auction Section ..........56-57 Business Calendar ............57 Advertisers Index ..............58

Long before President Joe Biden made a nationwide goal of 100 percent clean energy and net-zero emissions by the year 2050, construction equipment manufacturers were Industry partnerships are bringing hydrogen fuel technology to earth work, mining and other off-high applications.

doing their part. So were project owners, specifying eco-friendly machines on job sites. Contractors stocked electric and hybrid machines and hired operators to run them. But Biden’s edict aside, the industry is driving closer toward mainstreaming of zeroemission construction equipment. In fact, The Bellona Foundation, a global non-profit fighting climate challenges, has see EMISSIONS page 50

Page 2 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 3

"In Business for over 33 Years" www.hendrixmachineryllc.com 2019 Case 580N, Stk#: 12627, OROPS, 4WD, 865 hrs., 4&1 Front Bucket, Ext-hoe ......$78,500

2009 Broderson IC80-2H, Stk#: 12456, 18,000 lbs., 46 ft., 1,352 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

Se Habla Español

2016 Dynapac CA1500P, Stk#: 12777, OROPS, 66" Pad Drum, 2,070 hrs., 14.9x24R3 Tires, Duetz Eng ..............................................$46,500

2018 John Deere 700K, Stk#: 12826, EROPS, 2014 Laymor SM400, Stk#: 12756, EROPS, A/C 2015 Dynapac CA1500, Stk#: 12526, EROPS, A/C & Heat, AM/FM Radio, 66" Smooth Drum, A/C & Heat, Radio, 6 Way Blade, 1,432 hrs., & Heat, 567 hrs., Water System, 8 ft. Broom, 90% U/C, 22" Pads ..............................$139,500 225x75Rx15 Tires, 4 Cyl. Kubota Eng ....$29,500 267 hrs., 14.9x24R3 Tires, 4 Cyl. Detuz ..$69,500

2018 Cat D6N LGP, Stk#: 12876, EROPS, A/C & Heat, Radio, Sweeps, Rear Screens, 6 Way Blade, 3,647 hrs, 33" Pads, 13'4" Wide ............$179,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2013 Komatsu D21P-8E0, Stk#: 12908, OROPS, 2017 Cat 330FL, Stk#: 12879, EROPS, A/C & 2018 John Deere 650K LGP, Stk#: 12883, Heat, Radio, 4,585 hrs., 90% U/C, 34" Bucket, EROPS, A/C & Heat, Radio, 6 Way Blade, 2,550 6 Way Blade, 2,984 hrs., 90% U/C, 20" Rubber hrs, 80% U/C, 24" Pads, 10' 4" ft. Blade$99,500 Tracks, 8' 6" Wide ..................................$42,500 32" Pads, Aux. Hyd., 11' 2" Wide ........$139,500

2019 Kobelco SK140SRLC-5, Stk#: 12894, EROPS, A/C & Heat, Radio, 3,063 hrs, 80% U/C, 2019 Sullair 185D, Stk#: 12049, New, 390 hrs., 42" Bucket, 24" Pads, Steel Tracks w/Rubber ...... 185CFM @ 100 PSIG, 2700 RPM, 125 PSI, ..............................................................$92,500 ST226 Tires, 3 Cyl. Kubota Eng ............$17,500

2011 Volvo A25E, Stk#: 11745, EROPS, A/C & Heat, 6WD, 11,000 hrs., 25 Ton Cap., 23.5Rx25 Tires ......................................................$95,500

2017 Cat 323FL, Stk#: 12880, EROPS, A/C & Heat, Radio, 2,739 hrs., Aux. Hyd., 34" Bucket, 32" Pads, 10' 6" Wide ..........................$149,500

2018 Cat 315FL CR, Stk#: 12867, EROPS, A/C & Heat, 3,014 hrs., 36" Bucket w/Krypto Klaw Thumb, Steel racks w/Rubber Pads, Cat Hyd. 2019 Link Belt 210X4EX, Stk#: 12895, EROPS, Quick Coupler, 2007 JLG 600A, Stk#: 12144, 500 lbs., 60 ft., A/C & Heat, 3,209 hrs., 80% U/C, 48" Bucket 2 Way Hyd. w/Hyd. Thumb, Aux. Hyd., 32" Pads, 12 ft. Stick, 2,394 hrs., 355x55Dx625 Foam Filled Tires, 4 Cyl. $136,500 10' 6" Wide ..........................................$126,500 Deutz Eng ................................................$22,500

2016 Cat 326FL, Stk#: 12910, 60 ft. Long Reach, EROPS, A/C & Heat, Radio, 4,697 hrs., 90% U/C, 60" Ditching Bkt, 32" Pads, 11' 2" Wide $159,500

2013 Toyota 7FDV35, Stk#: 12809, 7,000 lbs., 4,026 hrs., 48" Forks 48" Frame, 250-15/7.00 2016 Dynapac CA1500, Stk#: 12778, OROPS, 66" Smooth Drum, 2,107 hrs., 14.9x24R3 Tires 2014 Genie GTH1056, Stk#: 12719, 10,000 lbs., Front Tires, 7.00x12/5.00 Rear Tires, 6 Cyl. @90%, 4 Cyl. Deutz Eng. ......................$46,500 54 ft., 5,272 hrs ....................................$49,500 Diesel Toyota Eng. ................................$12,500

2015 Cat 12M3, Stk#: 12898, EROPS, A/C & Heat, Radio, 6,579 hrs, Front, Hyd., 14 ft. M/B, Ripper, 17.5x25, Tires, 90% Tires ......$139,500

2019 Linkbelt 245X4, Stk#: 12843, EROPS, A/C & Heat, Radio, 3,885 hrs., 31 1/2" Pads, 24" Bucket..................................................$129,500

2004 Yale GLP060VX, Stk#: 12914, 5,450 lbs., 10 ft., 48" Forks, 44" Frame, 28x9x15 Front Tires, 5.60x10 Rear Tires, Vortec 2400 GM Eng. ..............................................................$12,500

2017 John Deere 60G, Stk#: 12915, EROPS, 2017 John Deere 35G, Stk#: 12918, OROPS, A/C & Heat, Radio, 1,044 hrs., 80% U/C, 18" Bucket, Aux. Hyd., 16" Rubber Tracks, 80" Front 952 hrs., 80% U/C, 12" Bucket, 12" Rubber Blade, 6' 8" Wide....................................$62,500 Tracks, 68" Front Blade, Aux. Hyd. ........$34,500

2010 Cat 120M, Stk#: 12838, EROPS, A/C & Heat, Radio, 8,378 hrs., 14 ft. M/B, Front Implement Attachment ........................$102,500

2010 Cat 140M, Stk#: 12901, EROPS, A/C & 2014 Bomag BW211D-50, Stk#: 12214, 84" Heat, Radio, 7,547 hrs., 14 ft. M/B, 17.5x25 Tires Smooth Drum, 810 hrs., 23.1x26 Tires @ 50%, @ 60% to 70%, Front Aux. Hyd...........$107,500 Deutz Eng...............................................$59,500

2013 Cat 12M2 AWD, Stk#: 12902, ALL WHEEL 2010 JLG 600AJ, Stk#: 12136, 500 lbs., 60 ft., DRIVE, EROPS, A/C & Heat, Radio, 8,243 hrs., 2,928 hrs., 355x55Dx625 Tires, 4 Cyl. Deutz 14 Ft. M/B, 17.5x25 Tires @ 90%, Front Aux. Hyd. Front Push Block ........................$119,500 Eng.........................................................$29,500

2018 Cat 299D2 XHP, Stk#: 12897, EROPS, A/C & Heat, 3,525 hrs., Aux. Hyd., 84" Bucket, 18" Rubber Tracks, 90% U/C ......................$58,500

2010 Volvo EW210C, Stk#:12909, EROPS, A/C & Heat, Radio, 3,544 hrs., 42" Bucket w/Rockland Hyd. Thumb, Geith Hydraulic Quick Connect Coupler, 10.00x20 Dual Tires ..................$79,500

2016 Cat CS54B, Stk#: 12900, OROPS, 84" Pad Drum, 2,428 hrs., S70x75x26R3 Tires, 4 Cyl. Cat Eng. ..........................................................$89,500

2012 Genie S40, Stk#: 12106, 500 lbs., 40 ft., 3,307 hrs., 12x15.5 Foam-Filled Tires, 3 Cyl. Deutz Eng ..............................................$26,500

2017 Cat 279D CTL, Stk#: 12926, EROPS, A/C & 2009 Broderson IC80-2H, Stk#: 12449, 18,000 Heat, Radio, 2,658 hrs., 18" Rubber Tracks, 48" lbs., 46 ft., 1,066 hrs., 10 ft. JIB, 4WD, 4WS, 69 Forks, 46" Frame ......................................$46,500 hp., 10.00Rx15 Tires ............................$21,500

Page 4 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONTRACTOR CREWS COME TOGETHER AFTER TRAIN DERAILMENT

With the help of Volvo, John Deere and Komatsu excavators, emergency responders were able to remove the train cars and other debris caused by the accident.

CDOT DEMOLISHES 57-YEAR-OLD AGING VIADUCT ON I-70

Crews from the Colorado Department of Transportation’s Central 70 Project successfully demolished the 2-mi.-long Interstate 70 viaduct between Colorado and Brighton boulevards in four months, one month ahead of schedule.

SMH ADDS KIRBY-SMITH MACHINERY AS NEW DEALER

The Atlas brand of material handlers will make an excellent addition to Kirby-Smith's already large and diverse fleet offering, according to the company. Tom Hickson, general manager of the SMH Group, said, “We are excited to add such a major dealer to the network.”

INTEL BREAKS GROUND ON $20B, 670,000-SQ.-FT. CHIP FACTORY

Once complete, the Ocotillo campus will house a total of six fabrication factories. This new project is said to create 3,000 new Intel jobs, 3,000 construction jobs and indirectly support 15,000 additional jobs in the state.

FLAGSTAFF BRIDGE PROJECT EARNS NATIONAL AWARD RECOGNITION

After the old bridge was demolished, crews used hydraulic jacks to “slide” the new bridge into place. The method cut an estimated two months off of construction time and saved nearly $7 million over traditional bridge construction methods.

PLANNING FOR FUTURE — EXPERT OFFERS 2021-2022 CONSTRUCTION ECONOMIC FORECAST

The pandemic effectively ended the longest period of expansion in the U.S. economy since World War II and is negatively affecting many industries, weakening the economy, decreasing GDP and causing a lot of uncertainty in the markets. Everyone wants a recovery in 2021. And, according to Alex Carrick, chief economist, ConstructConnect, there will be a recovery in 2021, but it will be uneven. Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Petrik Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

VOLVO CE RECOGNIZES ASCENDUM MACHINERY WITH ITS FIRST-EVER WARRANTY AWARD

The Ascendum warranty team has committed to holding their service managers more accountable for all warranty claims, treating them similar to customer work orders.

MANITOWOC COMPANY TO ACQUIRE CRANE BUSINESS OF H&E EQUIPMENT SERVICES

Under the terms of the agreement, Manitowoc is expected to pay approximately $130 million funded by a combination of cash on hand and existing debt availability. The transaction is expected to close in the fourth quarter of 2021 and is subject to customary closing conditions and regulatory approvals.

CONSTRUCTION TECH START-UP DEBUTS ITS ESTIMATING PRODUCT

Following months of beta testing and sampling by more than two dozen general contractors and trade partners, Togal offers software that revolutionizes the estimating process in construction, according to the company.

AUSA GROWS U.S. MARKET FOR ITS UNIQUE COMPACT EQUIPMENT

AUSA has become a global manufacturer of compact industrial vehicles for moving materials and road maintenance. From its headquarters outside Barcelona, Spain, the equipment maker now produces a line of 16 different dumpers as well as forklift and telehandler models.

KENWORTH T680 FCEV CLIMBS TO PIKES PEAK SUMMIT

Kenworth became the first company to reach the summit of “America’s Mountain” with a Class 8 fuel cell electric vehicle. The milestone occurred during a Kenworth T680 FCEV zero emissions performance demonstration

FONTAINE RELEASES XCALIBUR EXTENDABLE PLATFORM TRAILERS

The four new Xcalibur extendable models are 53 ft. in the closed position and 90 ft. fully opened.

CURRY, VERSATRAN CONTINUE PARTNERSHIP WITH 6T RETRIEVER

The 6T Retriever brings to the table all the features of its predecessors, the 15T and 20T Retrievers, but does not require drivers to possess CDL licenses.

AGGREGATE PRODUCTION & RECYCLING SECTION

21 24 28

EVOQUIP CELEBRATES FIVE YEARS OF ‘CRUSHING IT’

KEESTRACK FINDS ‘PERFECT FIT’ WITH GOLDONI ACQUISITION METSO OUTOTEC DEBUTS NEW IDENTITY ACROSS WHOLE OFFERING

DEPARTMENTS

56 57

COMING AUCTIONS BUSINESS CALENDAR

35 38

MB CRUSHER Sorting Grapples ENGCON, TAKEUCHI Tiltrotators

EQUIPMENT

Dennis Hogeboom

Kent Hogeboom

Patrick Kiel

Sharon Swanson

• Colorado • Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

952/353-1770 612/481-8557 Cell e-mail pkiel@cegltd.com

760-518-4336 Cell e-mail sswanson@cegltd.com

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

WESTERN EDITION

YouTube

602/679-8759 dennishogeboom@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 5

563-8 872-44112 112

Bellevue (Dubuque), Iowa sales@jjscheckel.com jscheckel.com RENT OR

RENT OR

BUY!

2002 CA ATT D11R - $1855,000

7PZ High g Horse series, RRuns andd oper p ates a to spec p , bl d w// twin tilt, SSS ripper ipp r.. A/C ld use U-blade A/C, HHeaat. Could paint, otherwise very straight m good home. i h tractor from

2015 Deere 1050K - $$328,000

BUY!

2019 CA ATT D6T LGP VP PA AT - $268,000 $

2013 CA ATT D6 D6T 6T XW - $288,000 ,

2017 CA ATT 3390FL,, A02891 - $628,000

Yearr,, 2,000 hhour warranty A02952. 2,525 HHours, 744 IIdle dl hours, h Only ly 1,781 4,650 hours, SU Blade, M Multi l Sh Shaankk Ripper pp r,, Topc Topc p on A02962. 3,960 Total hours. 2 Ye 6,200 Hours, 2 Year Year factory fac y warranty remainingg, remainingg until 9/2023. ARRP Accugr g ade GPS readyy,y, actual oper p atingg hourss. GPS ready, Allied W6G W Winch, i hi GX60 Full Auto GPS syst y em comes withh machine. 32’’ Boom, 14‘5”” Stick S , 66”” 5 Ya Yardd Bucket. Lik Like L new U/C. U/C, CClean documented hi history. VPAT 6-w bla d documented history. l and original with doc VPAATT 66-way bl de, Straight, clean & original west dirt machine. Goodd U/C i i Midw 1 Ownerr,, Ex Excellent condition. Full documentation.

RENT OR

BUY!

2017 CA ATT 390FL,, A02908 - $628,000

2019 CA ATT 374FL - $$618,000

2020 CA ATT 330 Nextt Gen - $258,000 ,

Years off ffactory fac y warranty a y remaining. 1,138 Hours, 626 at idl 6,885 Total hrs, 22,755 755 IIdle dl hrs, 2 Yeear facttoryy warrantyy. 3,663 Hours, 2 Years idle, 2DD Grade G d Control, C l AAuxiliary ili y Reputa p tion 1 owner machine. hi Grade control.l k new UC. C 32’’ Boom, 14’5”” Stick S , 66”” 5 Yar Yard bucket,, Like hydraulics, Tool control, 10’6”” Stick S , 4 years remaining 0”” SStick. i k 4 Yar Yard 60”” buck bucket. Super clean machine! 1 ownerr,, excellent e condition, full docuumentation. 11’10” CAT AT Premier P Warranty. Will not disappoint! di i !

2013 CA ATT 329EL 3 - $114,000 ,

4,700 Hours, New 554”” bucket bbuckk , 10’6”” SStick, i k Fullyy

loaded, Longg and Widee UC, PPattern changer g r,, Excellent Ex ll

condition, o Original O ppaint. Rent/Lease /L or Buy.

2018 CA ATT 320 Next Gen - $159,000 ,

A02915. 2,450 Tootal hours, 1,593 Idle hours hours. 2D Grade G d control, Deluxe pack package g , Factoryy warranty remaining e . k 9’6” 9’66”” Stick, iliar hydraulics. 24”” BBucket, S Auxiliary lics

RENT OR

BUY!

2018 CA ATT 320 Next Gen - $159,000 $ ,

2017 Deere 210G LC - $126,000

A02946. 2,623 totall hhours, 1,462 off thos h se hours h at idle, dl 1,760 Hours, Local trade-in, 9’6”” Stickk. 48”” 1.3 Yar Yard 2D Grade Control, 9’6”” Stick, S Aux Hydraulic Pkgg in stock. bucket. Deluxe cab. Offereedd wholesale. This machine won’t dissapoint, save big $$ from new! Compare pricing for same yeear and hours.

2014 CA ATT MH3059 MH30059 - $348,000 ,

8,250 Hours, Material handler err,, as nice as they h y come. li cabb, 325 HPP,, Ground access and high g risee hydraulic 9’’ SStick, i k Setup S 35’ Boom, 29’ foor grapple. 130,000 lbs.

) CA AT 730C’s AT 730C’ - $358,000 $ EA. (4)2016 ) Volvo A A40G’s - $268,000 , EA. ((2)2014 55,400 400 Hour H trucks, Haalf idle time, Ma Matching h ggroupp. V y goodd Tailga g tes, 1 Ownerr,, Excellent EEx condition. Very e or Buy. B R di tires. Ready to Radial t go. Rent/Lease

Ejec Ej j tor bodies, b di 835 & 1,418 Hours. H 1 Owner. Radial R di l i Original tires. g ppain aint. All maintenance historyy. Super p clean, original, i l, low hhour trucks. Rent/Lease or Buy. B

RENT OR

BUY!

((6)2015 ) CA ATT 740C’s 740C’ - $228 $ 8,000 , EA.

Ejec Ej j tors, 99,000 000 HHour range g , Half idle dl tim me. 1 ownerr.. AAllll maintenance historyy. RRadial tires. Original r g paint. k Rent/Lease or B y.. Super clean trucks. o Buy

B POWERTRAIN PLUS REBUILDS

2017 CA ATT 986H, A029114 - $388 $388,,000

2011 Volvo L220G 0G - $169,000 $ ,

2018 Volvo LL180H - $$238,000

10,100 Total hours, 2,927 Idle hours,, 2 Year/2,000 hr h CAT AT 8,900 Total frame hhours, 4,,157 HHours off idle dl time, A02916. 6,250 HHourrs, 6.5 Yar Yardd GP bucket b k , 330 HHPP,, Powertrain Warrantyy remainingg. Aggggrega g te handler pk p g, 7 Yar Yard GP bucket, 367 HPP,, 72,000 72,0000 lbs lbs. Original condition. 62,000 lbs, Auxillaryy hydaulic controls, Volvo dealer Ride control, 11 Yar Yardd GP k w// edge, ed Excellent G bbucket E ll tires. i Volvo Dealer Inspected, verified & pressure tested. inspected. Clean andd straight, str original machine.

ROLLERBLADES HOLMES SMOOTH DRUM R

200 CA 2007 ATT 826H - $$288,000 ,

9,800 Hours on Complet pl e DDealer l RRebuild. b ld Good G d used compac p tor w/ fullll main maintenance & service history. i Ex ll t feett, Clean cab, Tested to OEM specs. Excellen

RENT OR

NEW! BUY!

Ready to ship!

Holmes 11F - $25,50 , 0 / 16F - $31,500 $ 2018 CA ATT RM50 RM500B 0B - $$580 580,000 2017 Screenn Machine 514TS3 2018 K-TEC C 1237 ADT - $198,000 37 Yard Yard capacit p y ppull scraper p r,, Less Le than h 800 hours. h 2 Models, 11’ or 16’’ cuttingg widtth. Made in Iowa. 978 Hours. Remainingg 2 year pparts/service factory Spyder py - $189,000 $ ,000 Triple p Deck Mobile Screen S 2006 CA ATT D10T Rebuild Inn Process Constr M ching Mat hi g ppair airi available, ilable p clean. l Can be l bbl Super uction ggrade d , extreme dduty. For haul h l roadd & site Cat Warranty. 1 Owner maachine hi , Universal rotor Plant, 11,760 Pl ,760 hhours, pr p ooduces 4 pproduc d t sizes, with a - $885,000. Zero hour Powertrain Plus, V l o A40G for / l for ddt price. o rent/sale for addt addt’l lleveling l , compacting & sealing l ddi dirrt prior to rain event. 5th scalped oversize pproduct on the loaading grizzly. rigged to a Volvo for both Asphalt Reclam mation or Soil Mixing. OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

visit

JJSccheckel.com

and watch w our new company vid deo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaders, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com | follow us ffor @jjscheckel.com orr daily updates:

Page 6 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLIMB TO TH HE TOP

Durable articulated dumpers by AUSA. Created e to maneuver on uneven terrains and in tight areas with ease. Explore the full range of AUSA A products at diamon m daequipment.com.

7 locations in Southern California & Southern Nevada

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 7

#92948 | 2017 BOMAG BW138AC-5, 1200 HOURS ....................................................$39,500

#93032 | 2007 KOMATSU CK30, CAB/AC | 2525 HOURS ....................................................$27,500

#93013 | 2013 TAKEUCHI TL12, CAB/AC | 2805 HOURS ..................................................$36,500

#2021001DM | 2015 KOMATSU D39PX-23, 2400 HOURS ....................................................$85,000

#C003JM | CAT 963C, CAB/AC | GP BUCKET | 7100 HOURS ..........................................$99,500

#92729 | 2012 KOMATSU WA380-7, JRB QC. 4000 HOURS ........................................$127,000

#83398 | 2014 KOMATSU PC210LC-10, QC | 4200 HOURS ........................................$104,500

#82380 | 2009 KOMATSU PC220 LONG FRONT, 5950 HOURS ........................................$129,500

#92930 | 2011 KOMATSU D51PX-22, 6 WAY BLADE | 3200 HOURS ..........................$127,500

#92145 | 2006 KOMATSU PC300LC-7E0, JRB QC, #92926 | 2013 KOMATSU PC490LC-10, 8750 6900 HOURS ..........................................$69,500 HOURS | AUX HYD | QC ......................$109,000

#93009 | 2015 KOMATSU PC240LC-10, 7,750 HOURS, QC ............................................$79,500

#80768 | KOMATSU PC300LC-7 LONG FRONT, 7400 HOURS ..........................................$99,000

#92180 | 2012 KOMATSU D65EX-17, RIPPER | SIGMA BLADE | 4700 HOURS ..............$149,500

#92983 | 2013 KOMATSU D65WX-16, CAB/AC | RIPPER | SIGMA | 6700 HOURS ............$94,500

#C2021004BMG | 2005 KOMATSU D65EX-15, 13,399 HOURS | NEW ENGINE 11,000 HOURS .... ................................................................$55,000

Page 8 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contractor Crews Come Together After Train Derailment Volunteer emergency responders, firefighters, law enforcement, medical providers, contractor crews and regular citizens all worked together to help those whose trip was so suddenly and violently interrupted by the derailment of an Amtrak train on Sept. 25 in Montana. With the help of Volvo, John Deere and Komatsu excavators, emergency responders were able to remove the train cars and other debris caused by the accident. Investigators do not know the cause of the accident, but they are studying video from the train and another locomotive that went over the same track a little over an hour earlier, National Transportation Safety Board Vice Chairman Bruce Landsberg said. Sometimes rail lines can become deformed by heat, creating buckles in the tracks known as sun kinks, according to officials. That was the cause of a derailment in northern Montana in August 1988, when an Empire Builder train veered off the tracks about 170 mi. east in the tiny town of Saco. The NTSB concluded that an inspection failed to catch a problem in the track, and officials did not warn trains to slow down on that stretch. The crew saw the track had shifted, but the train was going full speed and could not stop before derailing. “We have experts that are studying the camera footage frame by frame to make sure that we see exactly what the engineer saw — or maybe didn’t see,” Landsberg said. The train derailed before a switch in the line, where one set of tracks turned into two, on a stretch of track that had been inspected just two days before, he said. The westbound Empire Builder was traveling from

less serious injuries. Sarah Robbin, the Disaster and Emergency Services coordinator, said the response across the Hi-Line was “fantastic.” “We can’t thank our partners enough, who came from everywhere and did what they needed to do, and it’s just going to be one of those things that I don’t know that we’ll ever be able to repay, but know that when they put out the call, we will be there for them,” she said. The derailment was approximately 150 mi. northeast of the capital of Helena and about 30 mi. from the Canadian border. The tracks cut through vast, golden brown wheat fields that were recently harvested and roughly parallel to U.S. Highway 2.  The derailment was approximately 150 mi. northeast of the capital of Helena and about 30 mi. from the Canadian border.

Chicago to Seattle when it left the tracks near Joplin, a town of about 200. The train, carrying 141 passengers and 16 crew members, had two locomotives and 10 cars, eight of which derailed, with some tipping onto their sides. Trevor Fossen, a farmer who just so happened to be on the scene at the time, stopped to help local crews. Fossen and at least nine other people called 911, setting off a chain reaction of help from residents in the nearby towns of Joplin and Chester as people jumped into action to get people off the train and care for injured passengers and those who were stunned and had suffered bumps, bruises and other

With the help of Volvo, John Deere and Komatsu excavators, emergency responders were able to remove the train cars and other debris caused by the accident.

CDOT Demolishes 57-Year-Old Aging Viaduct On I-70 Crews from the Colorado Department of Transportation’s Central 70 Project successfully demolished the 2-mi.-long Interstate 70 viaduct between Colorado and Brighton boulevards in four months, one month ahead of schedule. “Safe, successful and timely demolition has been our priority since day one,” said

Bob Hays, CDOT's Central 70 project director. “The intricacies of conducting demolition in such a confined area close to homes and businesses were a challenge. But from careful planning and execution, the team completed another major project milestone and Denver’s I-70 viaduct is now a thing of the past.”

The Central 70 Project will reconstruct a 10-mi. stretch of I-70, add one new Express Lane in each direction, remove the aging 57-year-old viaduct and lower the interstate between Brighton and Colorado boulevards.

Since May, demolition statistics include: • More than 45,000 hours worked to complete demolition; • 18 excavators used in tandem to carefully remove sections of the viaduct at a time; • A total of 52,000 cu. yds. of concrete and 1,025 tons of steel removed and recycled; • More than 4,500 dump truck loads of debris removed. “With the viaduct demolition happening just feet away from some of these businesses, we wanted to help encourage customers to continue to frequent these local shops and

restaurants,” said Central 70 Communications Manager Stacia Sellers. “In addition, Kiewit offered businesses cleaning services to combat dust, which is inevitable with any demolition activities.” With viaduct demolition now complete, crews will continue excavating for the future eastbound lanes of I-70 between Brighton and Colorado boulevards, which will mirror the current lanes motorists are traveling on today. During the construction of these future eastbound lanes, traffic on I-70 through the lowered section will remain as is, with three lanes of traffic open in each direction of I-70 during peak travel times. The future eastbound I-70 lanes are on track to open in 2022. At that time, four lanes of traffic (three general-purpose lanes and one express lane) will be open in each direction. About Central 70 Project The Central 70 Project will reconstruct a 10-mi. stretch of I-70, add one new express lane in each direction, remove the aging 57year-old viaduct and lower the interstate between Brighton and Colorado boulevards. For more information, visit central70.codot.gov. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 9

Page 10 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SMH Adds Kirby-Smith Machinery as New Dealer

KOMATSU D65EX-15

Made in the USA

The SMH Group US has added Kirby-Smith Machinery Inc. to its dealer network for Atlas material handlers. The Atlas brand of material handlers will make an excellent addition to Kirby-Smith's already large and diverse fleet offering, according to the company. Tom Hickson, general manager of the SMH Group, said, “We are excited to add such a major dealer to the network.” Kirby-Smith Machinery Inc. was established in 1983 and is recognized as one of the premier new and used heavy construction equipment and crane dealers in the country. KirbySmith Machinery and its hundreds of dedicated professional employees are committed to providing reliable new and used equipment for sale and equipment rentals, as well as responsive service and equipment parts for multiple makes and models. Kirby-Smith Machinery has 12 branch locations in Oklahoma, Texas, Kansas and Missouri. “The addition of Atlas material handlers for our territory in Oklahoma, Kansas, Missouri and Illinois will allow us to provide additional value to existing customers and increase our opportunities to partner with port businesses and scrap processors,” said Jeff Weller, chief operating office and executive vice president of Kirby-Smith Machinery Inc. Headquartered in Northern Germany, Atlas has been manufacturing equipment for more than 100 years. Its material handlers include mobile industrial machines and industrial tracked machines, which work on applications such as scrap, wood, bulky goods, recycling, port applications and vacuum operations. SMH Group US is a leader in specialized equipment solutions for port solutions, recycling, scrap metal, demolition, waste and much more. Kirby-Smith Machinery joins a growing network of SMH Group US distributors throughout North America including Linder Industrial Machinery for Florida, North and South Carolina plus coastal Georgia; New Millennium Rentals for New Jersey, Delaware and Maryland; ROMCO Equipment for Texas; 5-R Enterprises for northern Illinois and northwest Indiana; Cowin Satisfaction Equipment for Alabama and western Georgia; and Chadwick-BaRoss for New England. These dealers provide Guaranteed! top-notch support, ongoing maintenance, repairs, parts, and service of Atlas Material Handling machines. SEAL SAVER PROTECTIVE For more information, contact Andrew Clouse at CYLINDER COVER aclouse@kirby-smith.com.  The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

The Atlas brand of material handlers will make an excellent addition to Kirby-Smith's already large and diverse fleet offering, according to the company.

ARIZONA STATE SECTION

“The Nation’s Best Read Construction Newspaper… Founded in 1957.” Your Arizona Connection – Sharon Swanson – 1-760-518-4336 – sswanson@cegltd.com

Intel Breaks Ground On $20B, 670,000-Sq.-Ft. Chip Factory Construction is now under way on the largest private sector investment in Arizona’s history. Intel broke ground on its new $20 billion project on its Ocotillo campus “This builds on 40 years that Intel has been in Arizona,” Intel CEO Patrick Gelsinger said. Intel once again is investing in Arizona with its two new leading-edge chip factories. The project spans 670,000 sq. ft. “If you want to get an indication of how big it is, if you look at this [current] facility, our new facility is three times larger,” said Dominic Greensmith, director of construction.

“They're going to go down about 60 feet in the middle and then we’re pouring about 400,000 cubic yards of concrete, 40,000 tons of structural steel going in. That’s about eight Eiffel towers so it’s phenomenal size, but inside the building, we’ll have hundreds of miles of cable and pipe. These are the most advanced buildings in the world.” Once complete, the Ocotillo campus will house a total of six fabrication factories. This new project is said to create 3,000 new Intel jobs, 3,000 construction jobs and indirectly support 15,000 additional jobs in the state. “For every job Intel creates, there’s five additional jobs

Construction of the new facility is expected to be complete by 2024.

Intel broke ground on Sept. 25 on its new $20 billion project on its Ocotillo campus, the largest private sector investment in Arizona’s history.

from distribution to vendors to supply chain,” Gov. Doug Ducey said. “It’s a good day for Arizona. We’re breaking out nationally and internationally as the place to fabricate semiconductors.” With this new addition, minimizing their environmental footprint was top of mind. “The factory that you see here and that we’re building is powered by 100 percent renewable energy,” said Todd Brady, director of public affairs and sustainability of Intel. “So all of the power we use is renewable. In addition, we just built a massive water reclaim facility. Water from our factory goes to the facility, where it can be treated and cleaned and then reused at Intel. That's up to 9 million gallons of water a day we can do that with.” Construction is said to be complete by 2024. 

Page 12 • October 10, 2021 • www.constructionequipmentguide.com • Arizona State Section • Construction Equipment Guide

Pros Kno Pros Kno ow! w!

T Those in the know w,, know Takeuchi Take euchi

Takeuchi of o ffers a wide range of compact excavatorss to help you get your tougheest tasks comppleted. PUT A TAKEUCH A HI TO WORK ON O YOUR JOBSITE AN ND EXPERIIENCE THE DIFFEREN NCE!

www.ditchwitchaz.com

4028 S 36th Street Phoenix, AZ 85040 (602) 437-0351 6975 N Camino Martin Tucson, AZ 85741 (520) 579-0261

takeuch hi us.com hi-us.com

Flagstaff Bridge Project Earns Quality Used Water National Award Recognition We Deliver Worldwide!

Trucks & More 2019 International DuraStar 4300 2018 International DuraStar 4300 2018 International DuraStar 4300 Stock # 18G54BX, 24ft Box Stock# 18F24WT, 2K tank Stock# 19F20WT, 2K tank

2015 Peterbilt 337 Stock# 15H43WT, 2K tank

2016 Peterbilt 348 Stock# 16C20WT, 4K tank

2018 International DuraStar 4300 Stock# 18M51WT, 2K tank

Trade-Ins Accepted Call for Pricing (602) 437-3980

Warranty Add-Ons Available

156 E. Mohave Street Phoenix, AZ 85004

www.SuperiorEquipmentInc.com

The Arizona Department of Transportation’s Fourth Street Bridge replacement project in Flagstaff is receiving national recognition. The project is among a list of 12 in line for national awards from the American Association of State Highway and Transportation Officials (AASHTO). The innovative bridge project has already won western regional recognition. For the national award, the three highest-scoring projects from each regional competition earn a place on a “Top 12” list of projects competing for the national Grand Prize — selected by an independent panel of industry judges — and the People’s Choice Award, chosen by the public through online voting. In addition, those top national winners each receive $10,000 in cash awards to be donated to a charity or scholarship of the state DOT’s choosing. “This project has provided improved access to our campus for our students and families. It also has created safe and healthy alternatives for students who want to walk to school or ride their bikes,” said David Lykins, superintendent at Northland Preparatory Academy, a charter school locat-

ed near the southern end of the Fourth Street Bridge. The new, wider bridge not only benefits the academy, helping students get safely to and from school, but also boosts economic development in the area with better traffic flow and more mobility options. ADOT State Engineer Dallas Hammit explained the innovative bridge-slide method utilized for the project: “We used a slide technique where the new bridge was built, just east of the old one. That allowed us to move the new structure into place in about two weeks. This greatly decreased the inconvenience to the traveling public.” After the old bridge was demolished, crews used hydraulic jacks to “slide” the new bridge into place. The method cut an estimated two months off of construction time and saved nearly $7 million over traditional bridge construction methods. This reduced the impact to the local community during construction as well as creating a wider bridge that allows vehicles and pedestrians to safely cross. View a time-lapse video of crews moving the new bridge into place at vimeo.com/442491601. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 13

ADVAN ANCING THE E EQUIPME ENT DISTRIBUTION UTION IN NDUSTRY THROUGH O NETWORKING,, EDUCATIO T ON, & LEAD DERSHIP

DISNEY’S S CORONA ADO SPRIN NGS RESOR RT JANUARY 17 - 19, 20 022 THE ONL O Y EVENT ST TRICTLY

EXPA AND - YOUR O DISTRIBUTION ON NETWORK

DEDICATED T TO THE EQ QUIPMENT

NETWORK - WITH W DECISION MAKERS

DIST TRIBUTION IND DUSTRY Y.

INTRODUCE - YOUR O NEW PRODUCTS & SERVICES V ES

WHAT IS TH HE AED SUMMIT T?

More inf M i for ormation tion on the 2022 AED Summit ummit visit us at:

The Summit is i the only industry event that brings to ogether equipment distributors, man m ufacturers and ser s vice providers under one roof.

bit.ly/20 y 022Summit

'HDOHUV DWWHQG WR ÀQG QHZ SURGXFWV WR GLVWULEXWH OHDUQ ZKDW·V QHZ WKDW FDQ KHOS WKHLU EXVLQHVVHV DQG QHWZRUN ZLWK LQGXVWU\ SHHUV 0DQXIDFWXUHUV DWWHQG WR PHHW ZLWK WKHLU H[LVWLQJ GHDOHUV DQG ZLWK QHZ

Page 14 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

West Abilene Equipment Center abileneequipmentcenter.com Abilene, TX 325-603-1328 Alpine Equipment Repair

Jet City Equip jetcityequipment.com Oak Harbor, WA 360-675-4441 Marysville, WA 360-651-9079 Wenatchee, WA 509-888-8181

*Compact Excavators Only

alpineequipmentrepair.com American Fork, UT 801-874-6061 Cascade Trader, Inc. cascadetrader.net Chehalis, WA 360-748-1182 Cisco Equip cisco-equipment.com Artesia, NM 575-748-1314 Odessa, TX 432-550-9181 Lubbock, TX 806-745-9595 San Angelo, TX 325-653-2121 CSTK cstkequipment.com Kansas City, KS 888-225-2785 Earhart Equip Corp. earhartequipment.com Tucson, AZ 520-889-6396 Four Seasons Equip, Inc. fourseasons-equip.com Houston, TX 800-234-5007 Dallas TX 866-270-1700

hceamericas.com

Mecom Equipment mecomequipment.com Stockton, CA 209-466-5135 Motor City Rentals & Sales motorcityrents.com Phoenix, AZ 602-539-2911 Nueces Power Equip nuecespower.com Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Antonio, TX 210-310-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 El Paso, TX 915-541-0066 Oregon Tractor oregontractor.com Roseburg, OR 541-679-6211 Portland, OR 503-282-7211 Porter Group Usa portergroupusa.com Corona, CA 951-674-9999 Lakeside, CA 619-390-1197 Pacoima, CA 818-834-0102 Newark, CA 510-713-7368 W Sacramento, CA 916-372-5925 Wildomar, CA 951-678-9902

R&S Industries Inc. rsindinc.com Clovis, NM 575-769-8659 Springdale Tractor Tulsa, OK 918-224-1565 Tri-State Equipment *Compact Excavators Only

tristateequipmentrentals.com Lake Havasu, AZ 928-680-6748 Fort Mohave, AZ 928-704-0101

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 15

THE HARDEST WORKING WARRANTY ON THE JOBSITE.

5 YR 3 YR

With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.

STRUCTURAL

STANDARD

*Limited lifetime warranty on the center pin.

hceamericas.com

Page 16 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Planning for Future — Expert Offers Volvo CE Recognizes 2021-2022 Construction Economic Forecast Ascendum Machinery The pandemic effectively ended the longest period of expansion in the U.S. economy since World War II and is negatively affecting many industries, weakening the economy, decreasing GDP and causing a lot of uncertainty in the markets. It can be difficult to be confident in your plans for your company in 2021 and 2022 when you’re not sure how larger macro-economic forces will impact your business. Looking for Upswing Everyone wants a recovery in 2021. And, according to Alex Carrick, chief economist, ConstructConnect, there will be a recovery in 2021, but it will be uneven. For example, travel and tourism will not see a recovery. “The airline sector is tumbling further,” said Carrick. “Tourism and business travel are far below normal. Security clearances at airports are down by 70 percent. Disney Inc. is reducing employment at its theme parks by the tens of thousands.” However, technology and entertainment has grown through the pandemic. “High-tech has come to the rescue of the economy through the pandemic,” said Carrick. “’Big Data’ management and video conferencing have saved the day for many corporations. But Zoom is now being valued by investors at a figure higher than the combined worth of America’s four largest airlines. Is that justified? Apparently, a lot of people think so.”

and COVID-19 outbreaks are causing delays. Many of the mega-projects that were slated prior to the pandemic were rapid transit projects and airport expansions, however, 2019 levels of commuting and flight will not return until 2022. Institutional construction also will see decreases in 2021 compared to 2019. Health care starts, for example, are off by nearly half YOY. “But this is a category of construction where pent-up demand will play an important role post-pandemic,” said Carrick. “Normal visits to the doctor and many elective surgeries are being postponed in favor of dealing with COVID-

“High-tech has come to the rescue of the economy through the pandemic.”

Money Spent The Federal Reserve insists it will keep nominal interest rates near zero until 2023 but they may change course as debt rating agencies begin to downgrade some public sector debt. According to the US CBO (Congressional Budget Office), consumer spending in the fourth quarter of 2021 will increase by just 1.2 percent year over year (YOY) after decreasing by 4.0 percent since the fourth quarter of 2019. And, business fixed investment (BFI), which is the purchase of new equipment, structures, and intellectual property products, is expected to increase 13.4 percent in 2021 after decreasing by 15.8 percent in 2020, says the CBO. If true, the 2021 figure will be 4.5 percent lower than the same period in 2019. U.S. exports are expected to grow at a rate of 7.6 percent in 2021 after a 40-percent gain in the second half and a 21percent loss in the second quarter of 2020, said the CBO. This growth, however, will still put real exports in the fourth quarter of 2021 at 1.2 percent lower than their value in the fourth quarter of 2019. CBO expects labor market conditions will improve in 2021, and the unemployment rate will reach 8.6 percent by the fourth quarter of 2021, which is about 5 percentage points higher than it was in the fourth quarter of 2019. All Things Construction In 2020, nearly all construction sectors are down by onefifth. Although construction has remained an essential service, contractors have reported project postponements and cancellations by owners, while new social distancing guidelines

Alex Carrick ConstructConnect

With Its First-Ever Warranty Award

Ascendum recently was named the Volvo CE Uptime Dealer of the Year in North America. (L-R) are Tim Hudspeth, Sandy Loudermilk, Dana Griffin, Ditrius Medley, Greg Hicks and Justin Glass.

Volvo CE dealer Ascendum Machinery has been recognized with the 2020 Best Performing Warranty Administration Team Award from Volvo — the first awarded in North America. Warranty reviews happen on a periodic basis, covering all the processes within Volvo’s warranty program — everything from on-time submissions, claim quality, parts returns and more. Data is entered into a scoring model, and North Carolina-based Ascendum scored not only the highest in North America, but the highest globally. “Ascendum has a great centralized warranty team with years and years of experience,” said Rhys Eastham, head of uptime and technical services of Volvo CE North America. “They do a great job sharing company best practices among their branches to ensure warranties are done consistently across their network.” The Ascendum warranty team has committed to holding their service managers more accountable for all warranty claims, treating them similar to customer work orders. That commitment means Ascendum and Volvo can Amazon Effect process claims faster, ultimately increasing uptime for Warehouse construction is the other category that didn’t their customers. see large losses; it was up 2.7 percent. “Our warranty team constantly strives to support our serv“As more people shop online, retailers’ needs for ware- ice branch personnel so that they have all the requirements to houses increases. Plus, there’s a move afoot to locate smaller diagnose, document and repair machines per Volvo’s warrandistribution centers closer to customers. City officials want to ty guidelines,” said Greg Hicks, Ascendum warranty managboast about residents having access to nearly everything er. “This makes us better partners with Volvo as well as prowithin a minimal time frame. Paris, France, for example, is vides a higher level of service to our customers, ensuring aiming to become a ‘15-minute’ city,” said Carrick. Retail construction, however, saw a loss of 30 percent in they have the manufacturer’s recommended repair covered actual starts, said Carrick. In 2021 and 2022, empty retail by warranty. We would like to thank our warranty team and spaces can hamper other types of construction, including service branches for their continued commitment to warranty warehouse, since companies will move into the empty retail training, and we share this award with our entire service space instead of constructing a new building. team.” Overall, GDP is expected to improve in 2021 but will Ascendum, which was recently named the Volvo CE remain below 2019’s numbers. So, expect more positivity Uptime Dealer of the Year in North America, has 15 locaand certainty in the markets in 2021 and 2022, but COVID- tions in the Carolinas, Georgia, Tennessee and North Dakota. 19 will have lingering detrimental effects for years.   19 as the top priority. Eventually, after reliable vaccines have been developed and disseminated, the dam will burst on the demand for traditional medical procedures.” Schools, especially higher education, are seeing decreased enrolment, primarily due to decreased foreign students, and more people learning online, which decreases the demand for repairs, upgrades and expansions of physical properties. Residential construction has been lifted by ultra-low interest rates and increased mobility. “A move back towards ‘old-time’ commuting and sitting at a corporate desk is already being led by real estate development firms and energy companies, however, the outlook for office space construction will remain uncertain, at best, for a couple of years,” said Carrick. However, more single-family housing implies support for roadbuilding, said Carrick, and “roadworks starts” is one of two construction categories that didn’t see big losses in 2020 (only -2.8 percent YOY).

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 17

4-YEAR 4,000-HOUR

WARRANTY

ON ALL YANMAR EXCAVATORS VIEW OUR FULL LINE OF EXCAVATORS, WHEEL LOADERS AND TRACKED CARRIERS AT

YANMAR.COM/US For more than 100 years, Yanmar has crafted powerful, fuel-efficient engines. Our eight excavators, six with true zero tail swing, are also put through rigorous testing to ensure that they possess that legendary Yanmar quality that allows you to overcome challenging conditions without sacrificing any of the larger-than-life power that you need to get the job done.

DISCOVER YANMAR EXCAVATORS AT YOUR LOCAL DEALER: AGROLAND EQUIPMENT & SUPPLIES

GLACIER SUPPLY LAND & AG

www.agrolandeands.com Texas

www.glaciersupply.com Montana

512-291-3364

ASAP EQUIPMENT www.asapequip.com Texas

IDAHO IMPLEMENT 979-690-1106

B-C EQUIPMENT SALES www.bcequipment.com Texas

254-855-6242

707-463-1057

DITCH WITCH OF OKLAHOMA AND ARKANSAS www.ditchwitchok.com Oklahoma, Arkansas

405-348-4633

DITCH WITCH SOUTHWEST www.ditchwitchsouthwest.com Texas

www.kellyattachments.com Texas

www.raseq.com Utah www.rgwequipment.com California

936-294-0282

409-948-4497

www.riverbendeq.com Colorado

www.meridianutilityequipmentsales.com 916-880-5776

ROMCO

California

www.romco.com Texas

www.fredraderhawaii.com Hawaii

DITCH WITCH UNDERCON

PACWEST MACHINERY

www.dwundercon.com 806-353-6683 Texas, Kansas, Nebraska, South Dakota

www.pacwestmachinery.com Washington, Oregon

808-836-0881

775-235-4069

www.sherlockequipment.com Washington

360-689-2208

TIME RENTAL 801-972-5588

www.timerentalmt.com Montana

406-543-7136

VAN’S EQUIPMENT RENTAL & SALES 925- 606-2450

970-717-6062

ROCKY MOUNTAIN EQUIPMENT AND RENTAL www.rmerentals.com Wyoming

MERIDIAN

www.shaferequipmentco.com Nevada, Idaho

SHERLOCK EQUIPMENT SALES-RENTAL 575-769-8659

RIVERBEND SALES RENTALS PARTS SERVICE

MPS DISTRIBUTION HAWAII 432-617-8351

www.rsindinc.com New Mexico

RGW EQUIPMENT 210-932-9943

MAINLAND TOOL www.mainlandtool.com Texas

SHAFER EQUIPMENT COMPANY 541-884-0114

RASMUSSEN EQUIPMENT CO 559-733-2982

LONESTAR OUTDOOR POWER EQUIPMENT www.lonestaroutdoorpower.com Texas

DEFATTE EQUIPMENT RENTAL www.defatteequipment.com California

www.kaweahequipment.com California

www.powerpacrentals.com Oregon

R&S INDUSTRIES, INC 208-265-0415

KELLY ATTACHMENTS 800-956-6287

CONSTRUCTION EDGE EQUIPMENT www.construction-edge.com Texas

www.idahoimplement.com Idaho

KAWEAH EQUIPMENT CO 888-874-3940

CLAIREMONT EQUIPMENT www.clairemontequipment.com California

POWER PAC RENTAL & SALES 406-471-4791

307-684-2130

512- 388-2529

www.vansequipmentco.com Washington

360-755-0399

VERMEER SOUTHWEST www.vermeersouthwest.com Arizona

844-830-4193

VERMEER TEXAS-LOUISIANA www.vermeertexas.com Texas, Louisiana

866-898-3763

VOLVO CONSTRUCTION EQUIPMENT & SERVICES www.vcesvolvo.com California

951-277-7620

ROWE’S TRACTOR www.rowestractor.com Washington

509-886-3200

206-763-5933

© 2021 Yanmar America Corporation. YANMAR has a corporate policy of continuous product improvement and development; therefore data, specifications, and warranty are subject to change without any advance notice. There may be differences between the specifications and illustrations contained in this publication and the actual equipment. Equipment components produced by other manufacturers may be shown in photographs in this publication for the purpose of illustration only and is not intended as an endorsement of that particular equipment or its suitability. Inspect equipment before using it and be sure it is operating properly. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual. Before operating a machine, read, understand, and follow all instructions of the manual and on the machine. YANMAR disclaims all representations, express or implied, or any liability from the use of this publication.

Page 18 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 19

Page 20 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Manitowoc Company to Acquire Crane Togal… Business of H&E Equipment Services Construction Tech Start-Up Debuts Its Estimating Product

The acquisition of H&E’s crane business will expand Manitowoc’s ability to provide rentals, new sales, used sales, aftermarket parts and service to a variety of end market customers.

The Manitowoc Company Inc., a global manufacturer of cranes and lifting solutions, announced that it has entered into a definitive agreement to acquire the crane business of H&E Equipment Services Inc., one of the largest rental equipment companies in the United States. The wholly owned Manitowoc subsidiary will be called “MGX Equipment Services LLC.” “We believe this acquisition will allow us to better understand and respond to the market needs, and to more effectively deliver solutions that positively support the customers’ business,” said Ion Warner, VP, marketing and investor relations, Manitowoc. “For Manitowoc, there is also the benefit of a recurring revenue stream in aftermarket services, new & used equipment sales, in addition to rentals [bare rental]. With this new business, we plan to continue improving these services by investing in best-in-class sales and technical support in the assigned territories." Under the terms of the agreement, Manitowoc is expected to pay approximately $130 million funded by a combination of cash on hand and existing debt availability. The transaction is expected to close in the fourth quarter of 2021 and is subject to customary closing conditions and regulatory approvals. The acquisition of H&E’s crane business will expand Manitowoc’s ability to provide rentals, new sales, used sales, aftermarket parts and service to a variety of end market customers. H&E’s crane business operates with 11 full-service branch locations. “Over the past few quarters, we have communicated that our intent is to grow through four strategic priorities, one of which is acquisitions focused on aftermarket. The purchase of H&E’s crane business is the next step in our journey to grow the less cyclical part of our business. H&E has a long history and excellent reputation for serving the lifting industry, and we look forward to welcoming the H&E crane team

to Manitowoc,” said Aaron H. Ravenscroft, president and chief executive officer of The Manitowoc Company Inc. Brad Barber, chief executive officer of H&E Equipment Services Inc. said, “H&E has become one of the largest rental equipment companies in the U.S. by maintaining a commitment to growth. The sale of our crane business to Manitowoc represents a transformative event in H&E’s continued efforts to increase its focus in the equipment rental business, while positioning us for future growth opportunities. “We believe Manitowoc will provide further career opportunities for our crane employees and will also continue to offer first-class service to existing crane customers.” Manitowoc will acquire 11 full-service crane facilities and operations in nine states and will continue to provide product support in the customers' local markets. These locations are: • Norfolk, Va. • Baltimore, Md. • Winston Salem, N.C. • Birmingham, Ala. • Baton Rouge, La. • Belle Chasse, La. • Houston, Texas • Dallas, Texas • Nashville, Tenn. • Phoenix, Ariz. • Salt Lake City, Utah While H&E’s crane business is transitioning with the acquisition, the day-to-day relationships will not change. The new distribution organization will be led by Cary Burr, H&E’s current SVP of Cranes. Burr will report directly to Les Middleton, EVP Mobile Cranes. “Initially acquisition will help make Manitowoc a stronger and more agile company, even during cyclical downturns, which is a positive for all of us,” Warner said. For more information, visit www.manitowoc.com. 

Artificial Intelligence construction technology start-up Togal.ai has announced it will enter the marketplace in September. Following months of beta testing and sampling by more than two dozen general contractors and trade partners, Togal offers software that revolutionizes the estimating process in construction, according to the company. “We are compressing weeks of work into seconds, and nobody has focused on this space yet,” said Togal CEO Patrick Murphy. “This is something every construction company needs, especially now. With construction delays and labor shortages due to the pandemic, the industry is under even more pressure to innovate.” Togal recently was featured on Cafecito Talk with Miami Mayor Francis Suarez. During the interview Murphy discussed how Togal and artificial intelligence could revolutionize the construction world. “I’m so proud of the progress that Togal.ai has made,” Suarez said following the interview. “It is so great to see a Miami born and Miami based tech company launch and grow successfully. The use of AI in construction will revolutionize the industry and I’m excited to see what the future holds for them.” Togal automates the estimating process, which includes measuring the size of each room’s square footage to accurately price the cost of construction. Typically, estimators do this manually with rollers and rulers, or with a click and drag of a computer mouse. Plans for major projects can be hundreds of pages, taking weeks to complete. Togal can finish those jobs in mere seconds. “Togal is faster than an experienced estimator, more accurate and a fraction of the cost. I haven’t talked with a construction company that wouldn’t use this. It makes them all more efficient,” Togal co-founder Patrick Hughes said. The goal isn’t to replace humans, but to allow estimators to spend more time helping their clients save money and build better jobs, thus increase their win rate. The Engineering and Construction sector is ripe for disruption. The $10 trillion industry has grown labor-productivity just 1 percent in the past 20 years, compared to 3.6 percent for manufacturing, according to a McKinsey Global Institute study. This is no secret to Murphy. When the former U.S. Congressman joined Miami-based Coastal Construction Group as executive vice president, he was struck by the lack of machine learning and technology used across the industry. So Murphy enlisted the help of various PhD’s in mathematics and AI experts to look for ways to improve production with technology. The estimating department stood out as the clear frontrunner because the work is repetitive and time consuming. For more information, visit www.togal.ai. 

Pages 21-28

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

EvoQuip Celebrates Five Years of ‘Crushing It’ EvoQuip, a compact crushing and screening brand with products that focus on simplicity, easy maintenance, fuel efficiency and ease of transport, recently celebrated five successful years in business via a virtual hour-long celebration attended by almost 100 distributors around the world. Launched in 2016 to bring a simplified range of equipment to the crushing and screening industry, EvoQuip has grown from strength to strength to become one of the top three compact crushing and screening brands in the world. Starting out with the Bison 35 crusher, capable of outputting up to 33 tons per hour, EvoQuip continued to introduce innovative products with the Cobra 290R now being the biggest crusher in its range, capable of outputting 320 tons. On the screening side, EvoQuip’s products have evolved to encompass the Harrier 220, a small yet robust machine designed for recycling, composting, topsoil, landscaping and contract building industries, capable of outputting 90 tons, to the highly aggressive scalping screen Colt 1600, which was built upon the features which have made the Colt 1000 a global success. The Colt 1600 is the largest screen in the EvoQuip range and can process up to 661 tons, depending on application. EvoQuip’s range also has developed to include tracked mobile conveyors, high- and low-level feeders and radial stockpilers, designed to work alongside its range of crushing and screening equipment. More recently, hybrid offerings, designed to give customers alternative energy options to operate their equipment and digital solutions, such as T-Link telemetry providing customers with real-time information on the performance of their machine,

have been at the forefront of EvoQuip’s evolution to address emerging industry needs. A strong leader in the compact crushing and screening industry, EvoQuip would not be the success it is without its loyal dealers and customers. While the brand started off in 2016 with just five dealers, this has since grown to 44 dealers from around the globe. This growing distribution network alongside attendance at exhibitions such as ConExpo, bauma, World of

The Colt 1600 is the largest screen in the EvoQuip range and can process up to 661 tons, depending on application.

The Cobra 290R is now the biggest crusher in its range, capable of outputting 320 tons.

Concrete and Hillhead continued to strengthen the brand, showcasing its offering to global audiences. Due to the COVID-19 pandemic, EvoQuip had to change initial celebratory plans for this milestone from an in-person event to a virtual one. Hosted by Northern Irish actor and comedian Tim McGarry, dealers were treated to a personalized EvoQuip song, a timeline of the last five years, a live quiz where some of the team members’ knowledge was put to the test, a raffle and the first ever EvoQuip Dealer Awards. The EvoQuip Dealer Awards included several categories such as Global Leader in Industry Growth,

Customer Support and Rental Business Growth, to name a few. Among the winners were Mobile Screening and Crushing (MSC) from New Zealand who won Global Dealer of the Year. MSC is a strong dealer in all areas and engage extremely well with the EvoQuip team. It achieves sales targets, has a strong online presence and is wholly invested in the EvoQuip brand. It is a partnership that will continue to flourish and grow, according to the company. Speaking of the last five years, Barry O’Hare, business line director, EvoQuip said, “EvoQuip brings value to customers by providing intuitive equipment that is

The Bison 35 crusher is capable of outputting up to 33 tons per hour.

simple to operate and maintain, fuel efficient and easy to transport. User friendliness is at the heart of our brand and as new products have been developed, the focus has always been on simplicity and entry level customers. “Since joining EvoQuip over two years ago, I have seen the business grow from strength to strength and we couldn’t do that without our global distribution network. It is with the dedication of the EvoQuip team and the relationships we have built with our dealers that has enabled us to grow and

maintain our place at the forefront of the compact crushing and screening world. “I’d like to thank our dealers and customers for their support over the last five years and together we look forward to the future. There are some really exciting, innovative products in the pipeline and with the help and expertise of our distribution network, we will continue to grow and dominate the global compact crushing, screening and conveying market.” For more information, visit www.terex.com/evoquip/en/. 

Page 22 • October 10, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

www.sennebogen-na.com | +1-704-347-4910

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 10, 2021 • Page 23

From Reduction to Shaping Yo our ability to turn virgin material and waste prod duct into high quality aggregates requires equipment with unmatched power p and precision. From reducing shot rock to sizing and shaping finee sand, we design and manufacture the most versatile and efficient crusheers. Not sure what you need? Let our experts partner with you to apply thhe ideal solution.

astecindustries.com

4428 East Trent Ave. Spokane, WA WA 99212 800-541-07 75 54

22431 83rd Ave. S. Kent, W WA A 98032 800-669-2425

5241 NE 82nd Ave. Portland, OR 97220 800-950-7779

101 International Dr. Missoula, MT 59808 800-332-1617

1257 West Amity Boise, ID 83705 800-221-5211

19444 Ivan Street SW 4610 Cloudburst Way Way Rochester,r, W WA A 98579 Eugene, OR 97 7402 402 2 800-304-4421 800-826-9811 3155 Highway 93 S. Kalispell, MT 59901 800-434-4190

27 73 35C Tucker Ct. Jerome, ID 83338 800-221-5211 www.modernmachineryy.com

7850 S. Frontage Rd. Billings, MT 59101 800-735-2589

2666 Garrett W Way ay Pocatello, ID 83201 800-829-4450

12451 Old Highway 95 Boulder City, NV 89006 702-293-750 5 4 390 N. 2000 West 7780 N. Virginia St Lindon, UT 84042 Reno, NV V 801-796-6126 77 75-9 5-971-9124 280 W. Valley Road Rialto, CA 9237 76 6 909-87 74-2 4-2700

12639 W. Butler er Drive El Mirage, AZ 623-594-54 401

www.goodfellowcorp.com g p

5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

Kay Cee Ln. Durango, CO 81301 970-259-0455

412 South Jackson Street Amarillo, TX 79101 800-699-1723

#6 West Industrial Circle Odessa, TX 797 76 61 432-333-2887

2600 Center Dr. Milliken, CO 80543 970-587-1188

2340 I-70 Frontage Rd. Grand Junction, CO 81505 970-241-1550

102 North Main Street Hereford, TX 790 045 806-364-5687

613 S. 4th Ave Mansfield, TX 76063 76063 817-473-2 3 110

2239 Commercial Blvd. Colorado Springs, CO 80906 719-576-5541 71

7854 Hutchins Dr. Cheyenne, WY 82007 307-634-5149

622 28th Streeet Lubbock, TX 7940 4 4 806-7 74 49-5687

www.powermotivecorp.com p p

3871 IH -10 W. Freeway Exit 693 Columbus, TX 78934 979 9-7 7 73 32 2-6902 6902 www.texasbearing.com g

Page 24 • October 10, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Keestrack Finds ‘Perfect Fit’ With Goldoni Acquisition Keestrack R3e mobile impact crusher for aggregates and recycling applications with advanced innovative diesel/electric drive with plug-in functionality.

The Hoogendoorn family, founders and 2nd generation owners of the Keestrack Group.

Keestrack, a major manufacturer in mining, recycling and construction equipment found a perfect fit with Goldoni, who specializes in agricultural machinery, to enter the agricultural market and to grow even more in the construction segment. “After decades of organic growth, we’re glad to continue our growth by expanding our business into the agricultural segment” said Kees Hoogendoorn, president of the Keestrack group. “After analysing many opportunities we felt personally drawn to Goldoni for its rich traditional family values which are very close to ours. Our goal is to keep this historic brand alive supporting the local economy and employment rates.” “We see a lot of synergy between the current businesses,

such as production systems, suppliers and dealer network, which will leverage the Goldoni business to bring success to the company,” said Peter Hoogendoorn, vice president of operations of the Keestrack Group operating its own Italian factory for crushers in Ponzano Veneto. Keestrack already has a clear strategy to restart the Goldoni tractors production as soon as possible, focusing on making the best specialized tractors, transcars and motor cultivators, using Goldoni’s tradition with Keestrack’s innovation. Keestrack has a strong drive to innovate and is preparing for industry 4.0. “The product portfolio will meet the customer’s requirements. We look to the future and want to introduce the K-

series open field tractors in the near future. The Goldoni dealer network, in synergy with Keestrack’s, will be the key to make the orange Goldoni tractors strong on the fields again,” said Roberto Lopes, Keestrack Italy CEO. Goldoni, a brand which has existed since 1926, stands for a high technology level with care for the environment, Italian traditions and passion for design, according to the company. From moto cultivators to specialized tractors like 4WD and Equal Wheels dedicated to orchards and vineyards, the Goldoni range is developed to help agricultural operators manage the entire agronomic cycle more effective and sustainable. For more information, visit www.keestrack.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 10, 2021 • Page 25

Page 26 • October 10, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

SAVVE MONEY M ANND TIME CRUSHER BUCKET The crusher bucket for your excavator. When installed on your excavator, it crushes any type of inert material.

REDUCE >> REUSE >> RECYCLE See the whole product range on: MBCRUSHER.COM info@mbcrusher.com

NEW BL4/EX/VT LIMITLESS PRODUCTIVITY

fae-group.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 10, 2021 • Page 27

CRUSHING & SCREENIN NG EQUIPMEN NT

THA AT WORKS IN STOCK K & RE EADY TO T RU UN!

SALES SER RVICE PAR RTS RENTALS S

Mobile Crushe ers

CENTURYEQ.COM

Scalping Scrreens

I li Sc Incline Screens

801-262-5761

Tracked S Stackers

RUBBLEMASTER.COM

Page 28 • October 10, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Outotec Debuts New Identity Across Whole Offering To harmonize the visual identity of the existing offering with the Metso Outotec organizational brand and to create a strong, unified and easily identifiable look for the new era, Metso Outotec will update the industrial branding of its whole product and service portfolio. The new identity will clearly differentiate Metso Outotec’s offering by combining modern design with the powerful Metso Outotec brand colors and typography. Standalone brands in the aggregates business like McCloskey, Shaorui and Jonsson make an exception and will continue with the existing branding. High customer value, sustainability and safety features are among the key criteria behind Metso Outotec’s industrial design and product branding choices. Metso Outotec’s Planet Positive-thinking also will be visible on the products: the more than 100 products already identified to have sustainability features relating to water or energy efficiency, reduction of emissions, circularity or safety will have a Planet Positive label attached to them.

TREES, BRANCHES, LIMBS, AND STUMPS ARE NO MATCH FOR A BANDIT® From roadways to right-of-ways, lot clearing to road clearing, get your work done faster and more efficiently than ever before with Bandit® machinery! Choose from different styles and sizes to suit your needs. Call today to reserve yours or to request a demonstration.

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

bobcatofnorthtexas.com 1302 S Stemmons Fwy. Lewisville, TX 75067 469-586-0000

616 Jealouse Way Cedar Hill, TX 75104 469-575-5339

1820 Mineral Wells Hwy. Weatherford, TX 76088 817-818-1600

2720 N Main Street Paris, TX 75460 903-706-5216

5633 Mark IV Parkway Fort Worth, TX 76131 817-654-2202

6029 N McDonald Melissa, TX 75454 214-307-7350

4612 Texoma Parkway Sherman, TX 75090 903-200-7129

1511 W Marshall Longview, TX 75604 903-758-5547

Implementation of Product Branding in Phases The main color of the Metso Outotec products will be light grey, replacing the previous industrial product branding of both companies. A darker grey shade will be used as an accent color to bring contrast. The strong and recognizable black and orange brand colors and the Metso Outotec logo will always be visible on the products. Additionally, product names will be visible, marked with an orange stripe. The new color scheme will be applied in a phased manner throughout all Metso Outotec products, starting with the new product launches in 2021. “The development of our new industrial brand design derives from our desire to present a strong, harmonized and consistent image towards our customers throughout all touchpoints. With an updated and appealing identity, we can strengthen our image as a leader in our customer industries and the enabler of sustainable modern life,” said

The main color of the Metso Outotec products will be light grey, replacing the previous industrial product branding of both companies. A darker grey shade will be used as an accent color to bring contrast.

Helena Marjaranta, vice president of communications and brand at Metso Outotec. “We are particularly proud of our Planet Positive labeling, which we will implement in our products hand in hand with the new branding. It is a strong proof of our commitment to sustainable business.” For more information, visit www.mogroup.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 29

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Terex RH30E Mining Shovel, 1:50 scale - $150

Grove RT760 Military Mobile Crane, 1:55 scale - $125

Vogele Super 204 Asphalt Paver, 1:50 scale - $120

Komatsu D475A Dozer with Ripper, 1:50 scale - $100

Caterpillar 615 Elevating Scraper, 1:50 scale - $100

Caterpillar 438C Backhoe/Loader, 1:50 scale - $75

John Deere 200LC Excavator, 1:50 scale - $70

Link Belt 210Lx Excavator, 1:50 scale - $70

Komatsu WA30 Compact Wheel Loader, 1:25 scale - $75

Komatsu HD785 Off-Highway Dump Truck, 1:45 scale - $70

Caterpillar 225 Excavator, 1:50 scale - $50

Caterpillar 631E Motor Scraper, 1:50 scale - $50

Caterpillar D6H Track-Type Tractor, 1:50 scale - $150

Komatsu PC100 Excavator, 1:48 scale - $70

Bobcat 225 Compact Excavator, 1:25 scale - $50

Caterpillar V-50D Lift Truck, 1:25 scale - $50

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 30 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 31

Larger control valve and electronic controls deliver smooth, precise performance and up to 12% faster cycle times

Bane Machinery 2449 Manana Drive Dallas, TX 75220 800-594-BANE (2263) 10505 North Freeway Fort Worth, TX 76177 800-601-BANE (2263)

Shift-long comfort from a spacious cab, automotive-grade seat and ergonomically-designed, fullyadjustable arm rests

3402 E. NE Loop 323 Tyler, TX 75708 800-594-2200 www.banemachinery.com

Cisco Equipment 1706 S. 1st Street Artesia, NM 88210 800-748-1846 2707 Slaton Hwy. Lubbock, TX 79404 877-745-9595 520 SE Loop 338 Odessa, TX 800-657-3673 620 N. Bell Street San Angelo, TX 76903 800-496-0271 www.cisco-equipment.com

Award-winning Wide Angle Visual Enhancement System (WAVES) provides seamless 270° panoramic view

Ground-level access to routine service points cuts daily maintenance down to just minutes

Oklahoma Territory Construction Equipment 3839 West Reno Ave. Oklahoma City, OK 73107 405-917-9191 866-339-6827 2520 E King Street Tulsa, OK 74110 918-835-7200 866-334-6827 www.oklahomaterritoryequipment.com

Triad Machinery 1601 E. Bay Street Tacoma, WA 98421 253-722-5600 910 N. Thierman Road Spokane Valley, WA 99202 509-534-1900 1210 Dale Lane Mt. Vernon, WA 98274 360-488-3948 4440 SW Airport Road Prineville, OR 97754 888-662-2940 91251 Coburg Industrial Way Coburg, OR 97408 541-342-7700

Tier 4 Final engines deliver up to 12% improved fuel economy…and no DPF to maintain

Robust undercarriage with innovative side-frame design is easier to clean

Nueces Power Equipment 7667 N Sam Houston Parkway Humble, TX 77396 713-247-0066 www.nuecespower.com

18200 NE Riverside Parkway Portland, OR 97230 800-221-8512 www.triadmachinery.com

Page 32 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AUSA Grows U.S. Market for Its Unique Compact Equipment

AUSA has become a global manufacturer of compact industrial vehicles for moving materials and road maintenance.

By Eric Olson CEG CONTRIBUTING EDITOR

In 1956, four friends in Spain came together to form a company to design and build microcars for the European market. Their business, Automóviles Utilitarios Sociedad Anónima (AUSA), only produced the diminutive automobiles for five years, but the cars were noted for their comfort and the quality of their workmanship. Then, AUSA abruptly shifted its focus in 1961 to make small dumpers for the construction sector. Although more commonly used in Europe, dumpers are different from dump trucks in that they are designed to be open four-wheeled vehicles with the load skip in front of the driver. In contrast, most dump trucks are larger and have their cab mounted in front of the load. A dumper gets its name from the fact its skip can tip to dump the load. Sixty years later, AUSA has become a global manufacturer of compact industrial vehicles for moving materials and road maintenance. From its headquarters outside Barcelona, Spain, the equipment maker now produces a line of 16 different dumpers as well as forklift and telehandler models. But it has only been since 2015 that AUSA has had a market presence in the United States, after the Spanish company decided to take a crack at America’s lucrative construction equipment business. “AUSA hired me in 2014 because of my expertise in the U.S. market and knowledge of how to create distribution networks in this country,” said Ignasi Moner, CEO of AUSA US Corp., from the company’s American offices just outside Charleston, S.C. “AUSA asked if I was ready to create a U.S. corporation and do state-by-state growth. I did so and we opened our American subsidiary in December 2014.” He noted that AUSA chose Charleston because of its desire to be on the mid-Atlantic coast where the time difference between South Carolina and the AUSA factory in Barcelona is a relatively short six hours. Its U.S. warehouse in Houston, Texas, is only one additional time zone behind

(L-R): AUSA’s Anthony Buccini, Sam Terrell and Ignasi Moner.

the Mediterranean port city. With much of AUSA’s equipment and parts being transported via ocean vessels, establishing facilities in key shipping port cities like Houston, Charleston and Baltimore was a logical step. Dumpers Have Become AUSA’s Top Sellers Of the three machine types that AUSA makes and sells, Moner characterized its compact dumpers as the company’s most popular line, although that was certainly not the case when he arrived in the United States. “It started with our forklifts because we saw a real need for the rough terrain models, but now I would certainly say

it is the AUSA dumpers,” he said. “On my visits to construction sites around the world, it is common to see dumpers at work. When AUSA came here, we were among the top three dumper manufacturers in the world, but not only did I not see our dumpers in America, I could hardly see dumpers at all.” Moner noted, though, that after beginning its American operations, the product promotion that AUSA did at large industry events, like the annual Golf Industry Show and the World of Concrete convention, began to pay off for the manufacturer. “We also worked with golf course builders and general construction contractors, and since then, more contractors have come to see the benefit of using dumpers,” he said. see AUSA page 42

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 33

8904 Fairbanks N Houston Road • Houston, TX 77064

281-598-0378 www.boyereq.com

BOYER EQUIPMENT, LLC CONSTRUCTION EQUIPMENT RENTAL & SALES

Page 34 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Attachments Pages 35-41

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

MB Crusher Presents Three New Sorting Grapple Models Pythagoras once said that three is a perfect number. To satisfy many construction sites, MB Crusher manufactured three new grapples designed and built with the company’s philosophy in mind: to simplify the work on-site, reduce the time spent processing material and save on operational costs. It ensured the grapples could work in multiple application areas: handling logs, stones, debris, poles, positioning stones for drywall, clearing branches, etc. The Irish Twins: The Two Small Grapples for Mini and Midi Excavators The new models are designed for smaller excavators: the MB-G350 and the MB-G450. The former weighs 187.4 lbs. and is compatible with mini excavators weighing from 2,600 to 5,200 lbs. The latter weighs 644 lbs. and can be installed on midi excavators weighing 6,000 to 12,000 lbs. Small and compact, versatile and safe, agile and precise, both grapples have a wider opening than any of the other grapples on the market, according to the manufacturer. Despite being small, they can still pick up and handle large materials and are equipped with a fall prevention valve, guaranteeing safety on the job site. The parts prone to wear are made of Hardox steel. Both models are designed to have an electrical kit installed for dual-acting hydraulics: this way, the two grapples can utilize 360-degree rotation even with mini excavators that only have two hoses. Like the larger models, the MB-G450 sorting grapple comes with interchangeable blades, which can be flipped around, extending the life of the blades. Finally, both units have two versions: with or without a rotation turret. Both grapples can have accessories installed to simplify managing materials: the clamshell kit is perfect when collecting and handling small material, picking up soil, gravel and sand. The multi-purpose blade kit helps pick up oddly shaped materials. For the MB-G450 sorting grapple, users can install the tilting lift rubber protection kit to manage angular blocks and delicate material. MG-G1000, for Excavators Weighing From 36,000 to 50,000 Lbs. Weighing at 3560.47 lbs. and a load capacity of 0.44 m3 /440L for versatile, compact and reliable equipment: the new MB-G1000 grapple was explicitly designed for heavy work. Due to the work, the unit has been reinforced without losing its agility and ease of use. There are two new features that are now the standard: the dual motor, which allows for greater rotation and closing force, and the balancing valves installed on the hydraulic cylinder, allowing the unit to be more precise when handling materials. This new model also comes with an inclined plate, allow-

Like the larger models, the MB-G450 sorting grapple comes with interchangeable blades, which can be flipped around, extending the life of the blades. Finally, both units have two versions: with or without a rotation turret.

ing the unit to work regardless of the angle, and has the 360degree hydraulic rotation, allowing the grapple to pick up materials in all working conditions efficiently. It’s also equipped with a safety valve, preventing accidental openings if the excavator’s pressure drops. There’s also a silent block, allowing the unit to work in areas where you need to be mindful of the noise. Depending on the work, the MB-G1000 model can be equipped with various accessories: the grip improvement kit

for the blades, allowing the unit to handle materials with a better grip and greater control, perfect for materials of particular weight and shapes. The multi-purpose blade kit consists of a double blade: one side has teeth while the other is smooth. Another accessory is the tilted lift rubber protection kit, which handles angular block or delicate material. Lastly, there’s the clamshell kit to collect and handle small materials. For more information, visit www.mbcrusher.com. 

Page 36 • October 10, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

-2 2))( 3* 6)40%')1)28 69&&)6 86%'/7#

'%00 97 83(%= 83 +)8 8,) &)78 46-') 32 69&&)6 86%'/7 =%21%6 4%687 %2( 92()6'%66 92()6'%66-%+) 4%687

;IƅVI TVSYH XLEX (SQMRMSR 6YFFIV 8VEGOW EVI XLI

7)00-2+ 69&&)6 86%'/ FVERH MR %QIVMGE %WLPERH :% "" .EGOWSRZMPPI *0 "" 'MRGMRREXM 3, "" 4SVXPERH 36 "" 7GLIRIGXEH] 2= "" (EPPEW 8<

ZZZ GHSSDUWV FRP

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 10, 2021 • Page 37

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

Modern Machinery

Waukesha-Pearce Industries, Inc. www.wpi.com

12320 South Main Street Houston, TX 77035 713-551-0506 Austin 512-251-0013

Beaumont 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275

Edinburg 956-386-0107 Kilgore 903-984-2011 San Antonio 210-648-4444

Tomball 281-351-9016

www.modernmachinery.com 4610 Cloudburst Way Eugene, OR 97402 800-826-9811 541-688-7321 Portland, OR 971-222-1710

Rochester, WA 360-273-4284 Kent, WA 253-872-3500 Spokane, WA 509-535-1654

Kalispell, MT 406-755-5540 Missoula, MT 406-523-1100 Billings, MT 406-252-2158

Boise, ID 208-336-8570 Jerome, ID 208-324-4522 Pocatello, ID 208-233-5345

Page 38 • October 10, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Engcon, Takeuchi Prepare Excavators for Tiltrotators Japanese excavator manufacturer Takeuchi has improved lead times for its dealers by introducing an Engcon Ready option for the TB295W excavator. This is the start of an expanded collaboration between Takeuchi and Engcon — with the goal of offering factory-installed and integrated solutions. Engcon’s tiltrotator, intelligent control systems and automatic machine couplers can increase the flexibility, efficiency and safety of smaller excavators at a time where there is great interest in these products, the manufacturer said. Simultaneously as interest and demand for Engcon products increases, so does the demand for shorter lead times. So, minimizing the time equipment stands at the dealer and providing customers quicker access to their machines is becoming increasingly important in times like these, where “time is money”.

The Engcon Ready option for the TB295W is the result of a collaboration between Engcon and Takeuchi to enable plug and play installations, reducing the installation times for Engcon products. This in turn works to the advantage of common customers. TB295W — The First Machine With an Engcon Ready Option The launch of this Engcon Ready option is the first step in an expanded collaboration with Takeuchi with the goal of offering factory-installed and integrated solutions. “The TB295W is the first machine to have Engcon Ready as a factory installed option. A smart choice as we see in many markets excavators equipped with an Engcon tiltrotator,” said Fredrik Eklind, product owner at Engcon Control Systems. Eklind explained that the factory installation of Engcon’s proportional control system, ergonomic handles and a locking system for safe tool changes, reduces the time it takes to get the machine ready at the dealer. “The only thing missing when the machine reaches the dealer’s workshop is an Engcon machine coupler and a tiltrotator for the configuration to be complete,” Eklind said. A Fully Integrated Solution With Benefits In addition to a faster lead time, being factory-installed has

additional benefits compared to the traditional process where the dealer undertakes installation. The factory-prepared Engcon Ready solution has the components of the Engcon control system fully integrated as a part of the machine. The Engcon Ready option for the TB295W means that the machine is delivered with Takeuchi-labeled Engcon handles, machine-adapted cable gland and a hydraulic locking solution that is adapted for Engcon’s fully automatic machine couplers that connect tools, hydraulics and electronics without the driver having to leave the cab. Engcon Ready has been specially developed in collaboration with Takeuchi, installed at the Takeuchi Nagano factory in Japan and is covered by the same factory warranty as the rest of the machine. Production of the TB295W installed with the Engcon Ready solution started in August 2021 and the first units will be delivered shortly to selected markets in Europe. It will then be launched globally. “The collaboration with Takeuchi provides benefits to everyone involved and enables customers to experience the harmony created by Takeuchi TB295W and the range of compatible Engcon products, control systems, tiltrotators and automatic machine couplers,” said Eklind. For more information, visit www.engcon.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 10, 2021 • Page 39

Page 40 • October 10, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 10, 2021 • Page 41

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engine eered and y that p prov vides safer and feature the Ultralo ok® tooth system easier tooth repla acement. Combined with premium p m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

Ultra alok® Tooth o S stem System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades ess™ Cutting Edges s and a Acce essories

KIRBY-SMITH MACHINERY INC. WWW.KIRBY-SMITH.COM ABILENE, TX • 877-577-5729 AMARILLO, TX • 800-283-1247 DALLAS, TX • 800-753-1247 FT. WORTH, TX • 877-851-9977 HEWITT (WACO), TX • 254-261-1370 LUBBOCK, TX • 866-289-6087 MCALESTER, OK • 918-310-1550 ODESSA, TX • 877-794-1800 OKLAHOMA CITY, OK • 800-375-3339 TULSA, OK • 800-375-3733

www.esco.weir

MODERN MACHINERY WWW.MODERNMACHINERY.COM MISSOULA, MT • 800-332-1617 BILLINGS, MT • 800-735-2589 BOISE, ID • 800-221-5211 COLUMBIA FALLS, MT • 800-434-4190 EUGENE, OR • 800-826-9811 JEROME, ID • 800-221-5211 KENT, WA • 800-869-2425 POCATELLO, ID • 800-829-4450 PORTLAND, OR • 800-950-7779 ROCHESTER, WA • 800-304-4421 SPOKANE, WA • 800-541-0754 Copyright ©, WEIR and the WEIR Logo are trademarks ks and/or registered trademarks of We eir Engineering Services Ltd.

Page 42 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AUSA Looks to Increase Its Number of Distributors Across the Country AUSA from page 32

AUSA is today a proud member of the GCBAA Golf Course Builders Association of America, Golf Course Superintendents Association of America, and the American Rental Association, to name just a few of its affiliations. The list of AUSA’s most popular dumpers, according to Moner, begins with the D601A, of which there are three different models, each featuring slight variations from the others, and all with payload capacities of 13,200 lbs., or 4.1 cu. yds. Behind that model is AUSA’s D350AHG, which can haul up to 7,700 lbs., or 2.75 cu. yds. “Contractors also like our more compact models — the D100A, D120A and D150A dumpers — because we realized a need from customers using small concrete buggies who wanted seats behind the skip,” Moner said. “We can also offer them with seatbelts, giving customers more safety, and extra capacity ranging from 2,200 to 3,300 pounds. Each of these are articulated dumpers.” Moner insisted there is no real comparison to be made between AUSA’s compact dumpers and larger dump trucks as the scale of the projects they take on are so different, he said. Still, he noted, “Ours is a smaller, more maneuverable machine that is centrally articulated with a 180-degree swiveling skip. They are built to go up and down hills and over rough terrain with ease. “The contractors that use AUSA dumpers save more money because ours are more efficient,” he said. “For instance, you will often see skid-steers and front-end loaders at a site moving earth to where crew members spread the dirt. With AUSA’s line of dumpers, excavators dig the dirt, put it into our dumpers, which can then better spread the dirt because of the 180-degree swiveling skip. As a result, AUSA’s dumpers work very well in applications like landscaping, smaller earthmoving jobs and projects involving concrete. “What you usually see on those jobs are flat dumpers, which cannot swivel and don’t work well on rough terrain. Why? Because there has not been a tradition to use compact dumpers,” he said. “I see that in other construction work in the U.S. Once builders see the benefits of products where they save money, gain more efficiency, help the environment and make workers safer, they will usually use those machines. Moner is proud of AUSA’s ability to build its dumpers to have such power, safety, efficiency and cost-effectiveness. Available for only a relatively brief amount of time in the United States, the product stands out because of its unique attributes, he said. “Now, I think dumpers are the most demanded products in this country,” he said. Forklifts, Telehandlers Also Excel in Tough Spots AUSA’s line of rough-terrain 4x4 forklifts, like the dumpers, are compact, powerful and versatile, according to Moner. Their reduced size and small turning radii give them excellent maneuverability on even the steepest hillsides. The company’s six forklift models also can handle heavy load capacities, ranging from 3,000 to 11,000 lbs., and have proven ideal in moving a large volume of hefty payloads.

Moner listed the C251H and C401H forklifts, able to transport 5,000- and 8,000-lb. loads, respectively, as being AUSA’s best-selling among that line. Each of the forklifts have a maximum lift of 17.88 ft. The manufacturer’s three compact 4x4 telehandler models utilize a telescopic boom that provides better handling despite the machine’s smaller dimensions in terms of width. It is positioned on the right side of the machine to provide the operator with improved visibility and increased safety while loading and unloading materials. Growing U.S. Market Now a Priority for AUSA When asked in July how many distributors AUSA had in the United States, Moner prefaced his answer by saying that the number was still trending upward. “Currently, we have 20 dealers and 48 points of sale, since some dealers have multiple branches,” he said. “By the end of 2021, we plan to raise that total to 25 dealers and 50 locations that sell AUSA products. There are still states where we

KOBELCO-USA.COM

Westrax Machinery 19618 S. Susana Rd. Rancho Dominguez, CA 90221 800-411-4717 611 N. Golden Key St. Gilbert, AZ 85233 602-397-8173 www.westraxmachinery.net

Orion Equipment 18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

TRI-WEST TRACTOR 6281 Southfront Rd. Livermore, CA 94551 925-455-8200 www.tri-westtractor.com

Ignasi Moner is CEO of AUSA US Corp.

want to offer our machines.” With its product availability spanning five continents, and with subsidiaries in Germany, France, the United Kingdom and China, Moner said expansion in the American market has now become a priority. To boost the number of distributors across the country, he said the manufacturer has designed an attractive dealer program to assist with marketing, service and parts for AUSA machines. “We want them to become more of a partner and not simply a place to stock and sell AUSA equipment,” Moner said. “I don’t think we are very demanding — we just want them to succeed. Although many dealers know now who we are, for other dealers we are a new name, and we have a new line of products, like our dumpers. We want to help them locate customers for those machines. “And we also know that people that own AUSA products love their equipment,” he added. “We offer a very solid collection of products.”  CEG

APCO Equipment 3432 N 5th Street North Las Vegas, NV 89032 702-871-7474 www.apcoequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 43

Dig More. r BUILD D MOR O E. DO MORE.

EXPECT MORE FROM YOUR EXCAV C VATO T R. Pbma ehZ]l h_ ihp^k% bg]nlmkr&e^Z]bg` _nê ^\hghfr Zg] ^q\enlbo^ _^Zmnk^l rhn phg m Ûg] anywhere else, KOBELCO excavators are made to get more done each day than you ever mahnàm ihllb[e^' Ienl% ma^r k^ Zee [Z\d^] [r ma^ l^kob\^ Zg] iZkml lniihkm h_ ma^ DH;>E<H ]^Ze^k g^mphkd' Oblbm rhnk eh\Ze DH;>E<H ]^Ze^k mh Ûg] ma^ fh]ê [nbem mh e^m rhn Do More.

KOBELCO-USA.COM

21-K 21 KO KOBELCO BELCO-0 0642 642 2_N NewDea ew wDealer er_Ad1 Ad d1_RUN.indd RUN.indd 1

Scott Equipment 14635 Valley Blvd. Fontana, CA 92335 909-822-2200 • 800-316-0327 www.scottequip.com

7/7/21 7/21 /21 21 3:16 PM

BANE MACHINERY, INC. 2449 Manna Rd. Dallas, TX 75220 214-352-2468

Tyler, TX 903-597-6641 www.banemachinery.com

Fort Worth, TX 817-847-5894

Beard Equipment Co., Inc. 4509 I-20 Frontage Midland, TX 79706 432-694-4530 www.beardequipco.com

Page 44 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION Required by 19 USC 3685 Title of publication: CONSTRUCTION EQUIPMENT GUIDE WESTERN EDITION; Publication Number: 2330-9792; Date of filing: Sept. 21, 2021; Frequency: Bi-weekly, 26 issues annually; Annual Subscription price: $65.00; Complete mailing address of known office of publication: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s general business office: 470 Maryland Dr., Ft. Washington, PA 19034; Publisher’s name and address: Edwin M. McKeon, Jr. 470 Maryland Dr., Ft. Washington, PA 19034; Editor in Chief: Craig Mongeau, 470 Maryland Dr., Ft. Washington, PA 19034; Owner: CONSTRUCTION EQUIPMENT GUIDE WESTERN EDITION, 470 Maryland Dr., Ft. Washington, PA 19034; Edwin M. McKeon Jr., 470 Maryland Dr., Ft. Washington, PA 19034; Joseph McKeon, 5875 N. Lincoln Ave. Suite 227, Chicago, IL 60659; Richard McKeon, 3307 Indian Meadows Ln, Charlotte N.C. 28210; Known bondholders, mortgages, and other security holders: None, Issue date for circulation data below 09/26/21; Extent of circulation (Average number of copies during preceding 12 months): Net press run 17,890; paid circulation through agents 0; through mail subscription 17,780; free distribution 0; total distribution 17,780; copies not distributed 110; return from news agents 0; Total 17,890; Percent Paid and/or Requested Circulation 100%; Actual number of copies for issue published nearest to filing date: Net press run 21,343; paid circulation through agents 0; through mail subscription 21,237; free distribution 0; total distribution, 21,237; copies not distributed 106; return from news agents, 0; Total, 21,343; Percent Paid and/or Requested Circulation 100%. I certify that the above statements made by me are correct and complete. /s/ Edwin M. McKeon, Jr., President/CEO

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 45

REACCH NEW W

HE EIGH T TS IN PRRODUCTTIVI Manitowoc crawler c cranes are built to unsurpassed productivity and value on challenging jobsites. j Manitowoc delivers: d > Cranes ranging from 73 t (80 ( U USt)) to 23 > Capacity-enhancing VPC-MAX X® techno attachmen nts > Optional lo ong-reach booms, fixed fi jibs, extended u upper boom points > Optional 3..5 m wide boom inse erts for M

nitowoc.com n woc.com

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

www.kirby-smith.com Oklahoma City, OK 800-375-3339

Kansas City, KS 877-851-5729

McAlester, OK 918-310-1550

St. Louis, MO 866-279-1392

Tulsa, OK 800-375-3733

www.wpcrane.com 8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 1500 Madruga Road Lathrop, CA 95330 855-927-2637

19602 60th Avenue NE Arlington, WA 98223 253-254-7950

6720 Arctic Blvd. Anchorage, AK 99518 855-342-7263

91-210 Kalaeloa Blvd. Kapolei, HI 96707 808-682-7263

3521 Alken Street Bakersfield, CA 93308 855-927-2637

8912 NE Vancouver Way Portland, OR 97211 971-202-4002

Page 46 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Crews Performing $480M Upgrade On Fix50 Project in Sacramento By Irwin Rapoport CEG CORRESPONDENT

Construction crews from Flatiron are embarking on one of the largest highway construction projects in the California region. Overseen by the California Department of Transportation (Caltrans), the $480 million Fix50 project will see a longawaited upgrade of the busy section of Highway 50, a key corridor in mid-town and East Sacramento (Sacramento County), with the addition of high-occupancy vehicle lanes; widening of 12 bridges; and newly-built retaining walls. “This is one of the largest projects in the Sacramento region, one of the largest projects we've seen in a very long time,” said Angela DaPrato, public information officer of Caltrans District 3. One main purpose of this massive project is to replace the existing Portland Cement Concrete (PCC) pavement, reduce maintenance expenditures and reduce congestion. The existing PCC pavement was built between 1967 and 1971 and has reached the end of its service life. It is deteriorated and has a poor ride quality that requires annual maintenance to repair and maintain. A recent pavement condition survey conveyed that there is severe slab cracking and faulting in the third and fourth lanes in both directions and minor slab cracking in the first and second lanes in both directions. A portion of Highway 50, between W and X streets, is comprised of elevated bridges. Flatiron Construction will be tasked with building and connecting a third bridge between the east and westbound sides of the freeway to make room for the new HOV lanes. The project also includes the restoration of other roadway elements such as drainage, lighting and intelligent transportation systems. “In addition to widening 12 bridges and adding three miles of retaining walls, crews will replace all lanes with new concrete pavement and long-life asphalt,” said Flatiron Construction. “The project also includes adding a sound wall on the south side of the highway in the Elmhurst neighborhood, between Stockton Boulevard and 65th Street. [This is] an innovative project to serve the expanding needs of the Sacramento community. The U.S. 50 Multimodal Corridor Enhancement and Rehabilitation project will add seven miles of new carpool lanes in each direction to complete the U.S. 50 carpool system from the eastern Foothill communities into downtown Sacramento. “The sound walls are designed to be 8-to-14 feet tall and will make a total of 10,400 feet in length,” said Flatiron Construction. “The team applied masonry aesthetics best used in neighboring communities and anti-graffiti clear coating to minimize future maintenance costs. The sound walls, once complete, will provide a significant improvement to lessen highway noise in neighborhoods south of U.S.-50 between Stockton Ave and 65th Ave.” Construction Progress Currently, Flatiron crews are working along and on U.S.50 from the I-5 Interchange to Watt Avenue around the clock. Nighttime demolition work is taking place in the Elmhurst area. The median section is being demolished to provide space for the new lanes. According to Flatiron, in order to improve clearance for truck traffic, the highway will be lowered at seven overpass-

es. The project also includes rehabilitation of three pumping plants that move groundwater away from the highway as well as upgrading all signs, ramp metering and intelligent transportation systems. K-rail installation also is underway to complete the traffic split on eastbound U.S 50 from Howe Avenue to Watt Avenue. "I know the residents in the Elmhurst and South Park area are very excited about the sound wall that’s going to be extending from U.S. 50 from Stockton Boulevard all the way down to 65th Street,” said DaPrato. Light rail riders also will see some improvements with the addition of a second track along the Gold Line between Sunrise Boulevard and downtown Folsom. Additionally, crews continue to perform piledriving and other construction activities on/under U.S. Highway 50 between W & X Streets from 6th Street to 26th Street in Sacramento. Currently, the California Highway Patrol is performing rolling breaks and lane closures in both directions of U.S. 50 between Howe and Watt avenues for utility work with the Sacramento Municipal Utility District replacing power lines. Overall, the project also proposes to: • Allow connectivity and consistency with the planned HOV system in the Sacramento Region; • Enhance mobility and provide incentives for ride sharing during peak period travel; • Achieve the goals of the current SACOG MTP by promoting ride sharing; • Provide an option for reliable peak period travel time; • Use the highway facilities as efficiently as possible; • Improve general traffic operations by reducing congestion and travel time; • Improve bicycle and pedestrian access. Project Background The project is being funded by the State Highway Operations and Protection Program (SHOPP), Roadway Rehabilitation Program, Solutions for Congested Corridors Program (SCCP) by the State of California’s Senate Bill (SB) 1 – Road Repair and Accountability Act of 2017 and Sacramento Measure A Transportation Sales Tax Program managed by the Sacramento Transportation Authority (STA). The estimated capital cost is $398 million and the estimated support cost is $62 million. “This project will also increase the deficient vertical clearance at seven over crossing structures in the project limits as identified in the District 3 Goods and Movement Study,” DaPrato said. “This increased vertical clearance will reduce the frequency of ‘high load’ hits, reduce maintenance worker exposure to traffic, and improve freight mobility in this corridor.” The design-build initiative, which received project and environmental approval in May 2017, strives to deal with many inter-connected issues. CHP is designing the new lanes and highway infrastructure. Flatiron secured the design-build contract in the fall of 2020 and between November 2020 and last January, crews were removing debris and trees on the south side of US 50, from Stockton Blvd. to 65th Street to prep the sit for the construction of a sound wall.  CEG

ALASKA

NORTH DAKOTA

NC MACHINERY www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 07-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400

TRACTOR AND EQUIPMENT www.tractorandequipment.com Williston • 701-572-8377

CALIFORNIA HOLT OF CALIFORNIA www.holtca.com Pleasant Grove • 916-921-8969

COLORADO WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora • 303-739-3000 Denver • 303-433-2727 (Rental) Carbondale • 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs • 719-635-1669 719-390-7316 (Rental) Granby • 970-328-2080 (Rental) Gypsum • 970-328-2080 (Rental) Hayden • 970-276-3781 Silverthorne • 970-262-3788 (Rental) Fort Collins • 970-493-5005 (Rental) Grand Junction • 970-242-2834 970-245-6546 (Rental) Pueblo • 719-544-4433 719-544-0088 (Rental) Steamboat Springs 970-871-1990 (Rental) Windsor • 970-278-1750 (Rental) Burlington • (719) 346-5132 719-346-7880 (Rental) Durango • 970-259-2001 970-259-2001 (Rental) Windsor • 970-278-1750

IDAHO WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Caldwell • 208-350-6334 Hayden • 208-762-6690 Idaho Falls • 208-552-2287 Lewiston • 208-746-3301 Meridian • 208-888-2287 Pocatello • 208-232-2640 Twin Falls • 208-734-7330

NEVADA CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway Henderson, NV 89052 702-649-8777 Elko • 775-738-9871 Reno/Sparks • 775-358-5111

NEW MEXICO WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista • 505-334-5522 (Rental) La Cruces • 575-647-9700 Albuquerque • 505-345-8411 505-938-2000 (Rental) Hobbs • 575-393-3665 575-393-2148 (Rental) Clovis • 505-235-3294 (Rental) Farmington • 505-327-5331

MONTANA TRACTOR AND EQUIPMENT www.tractorandequipment.com Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Kalispell • 406-752-3030 Missoula • 406-721-4050

WYOMING TRACTOR AND EQUIPMENT www.tractorandequipment.com Worland • 307-347-4747

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton • 580-323-3422 Oklahoma City • 405-789-6812 Tulsa • 918-437-5085

OREGON WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pendleton • 541-276-5812

TEXAS GEORGE P. BANE, INC. www.banemachinery.com Tyler • 903-597-6641 WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

WASHINGTON NC MACHINERY www.ncmachinery.com 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pasco • 509-547-9541 Spokane • 509-535-1744

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 47

Page 48 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Air Compressor Solutions, Inc.

Ditch Witch of Arizona

Ditch Witch of Southern Arizona

www.acsir.com

www.ditchwitchaz.com

Odessa (432) 335-5900 Amarillo (806) 383-1213

Phoenix (602) 437-0351

Tucson (520) 579-0261

TEXAS

ARIZONA

Sierra Machinery, Inc. www.sierraelpaso.com

TEXAS

El Paso (915) 772-0613

NEW MEXICO Artesia (575) 746-6592

Volvo Construction Equipment & Services www.vcesvolvo.com

CALIFORNIA

Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244

San Diego/ Lakeside (619) 441-3690 Corona (951) 277-7620

MAKE POWER MOVES.

Papé Material Handling Inc.

OREGON

Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

www.papemh.com

NEVADA

Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386

Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 49

www.powermotivecorp.com

POWER MOTIVE CORPORATION DENVER HEADQUARTERS 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900 Colorado Springs, CO • 719-576-5541 Durango, CO • 970-259-0455 Grand Junction, CO • 970-241-1550 Milliken, CO • 970-587-1188 Cheyenne, WY • 307-634-5149

www.roadmachinery.com

ROAD MACHINERY LLC Phoenix, AZ • 480-545-2400 Phoenix, AZ • 602-252-7121 Prescott, AZ • 928-778-5621 Tucson, AZ • 520-623-8681 Bakersfield, CA • 661-695-4830 Hayward, CA • 510-659-1903 Fresno, CA • 559-834-3149 Mojave, CA • 661-824-2319 Perris, CA • 909-355-3600 Pico Rivera, CA • 562-699-6767 Redding, CA • 530-229-3820 Sacramento, CA • 916-375-3540 Santa Rosa, CA • 707-544-4147

www.clairemontequipment.com

CLAIREMONT EQUIPMENT 7651 Ronson Road, San Diego, CA 92111 • 858-278-8351 1330 W Mission Road, Escondido, CA 92029 • 760-739-9100 8520 Cherry Avenue, Fontana, CA 92335 • 909-429-9100 440 West Aten Road, Imperial, CA 92251 • 760-355-7700 81-501 Industrial Place, Indio, CA 92201 • 760-863-5558 4726 Convoy Street, San Diego, CA 92111 • 858-278-8338

www.kirby-smith.com

KIRBY-SMITH MACHINERY INC. 6715 W Reno Avenue • Oklahoma City, OK 73137 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com

12320 S. Main Street • Houston, TX 77035 • 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

&RQQHFWHG WR \RXU VXFFHVV 1RZ \RX FDQ VWD\ FRQQHFWHG WR \RXU pHHW DQG \RXU EXVLQHVV q LQVWDQWO\ )URP D FHOO SKRQH ODSWRS WDEOHW VLPSO\ ORJ RQ WR 0\ .RPDWVX \RXU IUHH RQOLQH SRUWDO IRU UHPRWH pHHW PDQDJHPHQW SDUWV RUGHULQJ DQG WUDFNLQJ SDUWV DQG VHUYLFH QHZV DQG RWKHU UHDO WLPH FXVWRPL]HG LQIRUPDWLRQ P\NRPDWVX NRPDWVX

Page 50 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

At Least 18 Manufacturers Lead Way for e-Revolution EMISSIONS from page 1

found that there is currently an electric alternative for at least seven different types of construction machines. Bellona started tracking the manufacture of zero-emission construction equipment, establishing a database that “combines all the available electric construction machinery and equipment that can help eliminate emissions and reduce noise from the job site.” Getting the Word Out The organization has found that at least 18 manufacturers offer equipment and components to support the electric revolution. These companies are cranking out eco-friendly excavators, wheel loaders, dumpers, vibratory plates, slew and track drives and cement mixers. And that’s just what Bellona has logged. Other manufacturers are joining the cause. “Even though there is already a good selection of products available on the market today, it seems like potential buyers are not informed well enough about the availability and the specifications of electric construction equipment,” the organization said. Bellona added that due to these advances in the market sector, contractors now have the opportunity to make an active choice for construction equipment that neither harms the surrounding environment nor the local community while still doing the job. “For the market there is only room to grow,” the organization said. The Association of Equipment Manufacturers (AEM) wants its members to stay informed as they grow with the market. The newly-formed Engine Emissions Strategy Task Force (EESTF) has a goal of helping guide AEM’s efforts to keep members and the off-road industry up to date on equipment emissions regulations. EESTF will work to educate professionals on potential future emissions requirements, changes to power trains, the impact on equipment design and cost implications, according to AEM. Another potential goal is to help others understand that a different technology solution for different applications and machine types may exist. Alternative Technology Solutions Different eco-friendly technology solutions have existed and continue to launch each year. Electric and hybrid small machines have been used in indoor construction and maintenance for years now. But, as Volvo put it, “quietly in the background, electric vehicles have been heading off the road and onto construction job sites.” Heavy equipment manufacturers were out in front, putting lower-emission engines in their machines over the years, adding features that reduce fuel consumption and

developing telematics systems to help operators reduce fuel usage and idling time. But heavy equipment like excavators and wheel loaders are just now becoming available in electric options, ushering in a new era of electromobility. “Electric machines are going to build the roads, bridges and utility lines of tomorrow, and they’re going to do it without producing greenhouse gas emissions,” said Ray Gallant, head of product management and productivity of Volvo CE. “There are already early adopters successfully using electric construction equipment, and they’re finding that they can lower their carbon footprint while keeping their performance high.” He believes the industry has come a long way in reducing emissions, and there is still room for improvement but “we’re at a point where most of the benefits have been realized. New technologies like electric machines are the next frontier in emissions reductions.” The challenges in bringing electromobility to the construction industry include building out the charging infrastructure. Manufacturers are finding work-arounds. Volvo’s electric excavator and wheel loader, coming to the United States this year, can be charged in a 220/240-volt electrical socket. They also are available with fastcharge options, getting them close to peak charge in a couple of hours. The company believes that with fast-moving development the industry will soon see options such as mobile power banks for charging in remote locations. “Our customers will not notice a difference between the power and performance of the electric machines versus the diesel models,” said Lars Arnold, Volvo CE electromobility product manager. “In fact, they’ll enjoy several benefits with the electric machines thanks to the lack of a diesel engine, including lower noise, less machine vibration and no exhaust fumes.” Power and performance are being generated through natural gas and hydrogen cell technology, both of which are gaining ground in the zero-emission front. Representatives from the California Natural Gas Vehicle Partnership (CNGVP) recently reported that fleets are increasingly turning to near-zero emission natural gas vehicles and carbon-negative renewable natural gas. Today, fleets across California and the nation are investing in commercially available and proven natural gas vehicles, said Ashley Remillard, vice chair of CNGVP. Fleet owners are “choosing sustainable

technology that meets their wide ranging and intensive operational needs while keeping an eye on future opportunities to incorporate electric trucks,” she added. At the same time, research and development of hydrogen and fuel cells for construction applications is g r o w i n g . Hydrogen is considered a good fuel source for the on-highway sector, but several manufacturers are combining forces to bring the technology to earth work, mining and other off-high applications. Hydrogen fuel cells are no-combustion technology that requires a constant source of fuel and oxygen to create electricity and emits only water. Hydrogen tanks on a fuel cell electric car or truck can be refilled in about the same amount of time as liquid fuel tanks, eliminating the lengthy recharging times required by battery-dependent electric vehicles. Hydrogen is available today from a variety of carbon-free and low carbon sources, providing low or even negative total carbon emissions from transport fleets, and zero smog-forming pollutants. How Feasible Is It? The vehicle group of power technology manufacturer Eaton announced a partnership with Ballard Fuel Cell Systems and the National Renewable Energy Lab to develop heavy-duty truck fuel cell technology using hydrogen fuel cells. The Green Car Congress reports that Eaton received a grant from the US. Department of Energy to develop highly efficient fuel cells capable of powering heavyduty machinery. Eaton’s Twin Vortices Series (TVS) technology is at the heart of the partnership, according to Karl Sievertsen, vice president and CTO of Eaton’s Vehicle Group. “Our TVS supercharger technology provides fuel cell manufacturers with a precise amount of controlled air to increase power and efficiency,” he said. “The efficiency of competitive fuel cells is lower because most hydrogen fuel cells use simple fans for air flow, which produces less pressure and is not controllable.” ABB, Zurich, Switzerland, has signed an agreement with MEDATech of Ontario, Canada, to explore net-zero emission technology in the mining industry. The goal is to explore solutions to decarbonize mining operations through charging solutions and optimized electric drive systems in battery electric vehicles for heavy-

duty applications. Electric vehicles and matching charging infrastructure must meet demanding requirements for mining customers, including high power, automated and safe operations and ruggedized design for harsh environmental conditions. “The mining sector has set clear and ambitious targets to decarbonize operations for a more sustainable future,” said Nic Beutler, ABB’s global product manager power system & charging solutions. An agreement between Caterpillar and Nouveau Monde to develop zero-emissions mining equipment was announced this summer. Nouveau Monde hopes to become the exclusive supplier of all electric mining equipment at Matawinie Mine in Quebec, Canada, by 2028. Cat will work with the company to incorporate the customer’s voice throughout the development, and for testing of the zeroemission fleet and infrastructure prior to commercial production. Meanwhile, back at ACT Expo, a sustainably focused hybrid truck powertrain offering reduced weight and simplified installation, service and operation was on display this year. Newcomer Hyliion, based in Cedar Park, Texas, produces electrified powertrain systems to augment or replace traditional dieselor natural gas-fueled powertrains. This enhanced version of the company’s Hybrid powertrain is aimed at Class 8 diesel and CNG commercial trucks. Deliveries are planned for late this year. Thomas Healy, Hyliion founder, said the company expects the improvements “to make the system easier for fleets to adopt while also helping them achieve their emissions targets.” Also at the expo in Long Beach, Calif., was a Class 6 and 7 fuel-cell electric truck powered by Hexagon Purus of Norway and Ballard Power Systems of Canada. Hexagon Purus’ turnkey electric drivetrain and hydrogen storage system was combined with Ballard’s fuel cell module. The partners said the truck will provide a range of more than 400 mi. and refueling times comparable to conventional trucks. They’re marketing it as a zero-emission solution for fleet owners with demanding operations, moving goods through the ‘middle miles,’ without the need to expand their fleet. This truck should land on California’s hybrid and zero-emission voucher incentive program list in 2022. First fleet deployments are planned for the Los Angeles Basin area. “Fuel cell and hydrogen technologies will enable the decarbonization of the heavy-duty transportation sector with long range and quick vehicle refueling, without compromising on payload,” said Nicolas Pocard, vicepresident marketing of Ballard Power.  CEG

Trucks & Trailers

SECTION

Pages 51-53

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Kenworth T680 FCEV Climbs to Pikes Peak Summit A new Kenworth video features the zero emissions Kenworth T680 fuel cell electric vehicle (FCEV) on the road to the 14,115-foot summit of Pikes Peak in Colorado. Kenworth became the first company to reach the summit of “America’s Mountain” with a Class 8 fuel cell electric vehicle. The milestone occurred during a Kenworth T680 FCEV zero emissions performance demonstration. Kenworth and Toyota Motor North America R&D worked closely together on the successful summit attempt. The Kenworth T680 FCEV features a Toyota hydrogen fuel cell electric powertrain offering 470 hp, along with a 350-mi. range with a 15-minute refill time. “While the average gradient on the 4,700-foot elevation gain to the summit is just over seven percent, there are long sections at 10 percent or more. The Kenworth T680 FCEV had plenty of power on the hill climb, performed well at extreme altitude and exhibited excellent drivability through

California Climate Investments, a statewide initiative that puts billions of Cap-and-Trade dollars to work reducing greenhouse gas emissions, strengthening the economy and improving public health and the environment — particularly in disadvantaged communities. Additional funding for the Shore to Store program includes a grant from the South Coast Air Quality Management District (South Coast AQMD). “We’ve built five of the 10 T680 FCEVs, and these initial units are transporting loads for our customers at the Port of Los Angeles. The remaining five FCEVs are in the process of being built, and will enter into service early this year,” said Lindgren. “Kenworth appreciates the efforts of California Climate Investments, California Air Resources Board and Port of Los Angeles to provide significant grant funds to support this important Kenworth and Toyota zero emissions program.” “The road to the top of Pikes Peak is a long and steady

Kenworth and Toyota Motor North America are collaborating on a program to develop a total of 10 zero emissions Kenworth T680 FCEVs with the Toyota hydrogen fuel cell electric powertrain for service with customers at the Port of Los Angeles.

the 156 twisting turns and switchbacks,” Brian Lindgren, Kenworth research and development director said. Kenworth and Toyota Motor North America are collaborating on a program to develop a total of 10 zero emissions Kenworth T680 FCEVs with the Toyota hydrogen fuel cell electric powertrain for service with customers at the Port of Los Angeles. The effort is part of a $41 million Zero and Near-Zero Emissions Freight Facilities (ZANZEFF) grant awarded by the California Air Resources Board (CARB) for the Port of Los Angeles Shore to Store project. The Shore to Store project administered by the Port of Los Angeles is part of

climb, so we were glad to see the Toyota-powered Kenworth T680 truck confirm our expectations and climb to the summit while delivering excellent performance and drivability,” said Andy Lund, chief engineer, Toyota Motor North America Research and Development. “It’s another example of the capability of Toyota’s fuel cell electric drive system and we look forward to continuing our work with Kenworth to get Class 8 fuel cell trucks on the road.” The comprehensive Kenworth zero emissions EV program also features the new Class 8 Kenworth T680E battery electric and medium duty Kenworth K270E and K370 battery-electric vehicles, which are all available for order. The vehicles are designed for local pickup and delivery, drayage, and short regional haul applications. The overall program has recorded more than 100,000 mi. of on-the-road testing and operation. For more information, visit www.kenworth.com. 

Page 52 • October 10, 2021 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • October 10, 2021 • Page 53

Fontaine Releases Xcalibur Extendable Platform Trailers Fontaine Heavy-Haul, a leader and innovator in the lowbed and extendable trailer industries, has introduced 53 ft. Xcalibur extendable trailers that are California legal. “We listened to our customers and responded with four 53 ft. California legal models offering a choice of spring or air suspension with tandem or tridem axles,” explained Todd Anderson, VP sales and marketing. “All Xcalibur trailers are easy to operate, extraordinarily versatile and now legal on California roads.” The four new Xcalibur extendable models are 53 ft. in the closed position and 90 ft. fully opened. When the trailers are closed and the sliding axles are in their most forward position, the distance between the kingpin and the rear axle center is less than 40 ft., making these trailers legal to operate in the state of California. Xcalibur is designed for maximum uptime, according to the manufacturer. A cable management system helps protect telescoping air and electrical lines from damage and sliding axles are attached to the trailer in a “Slider Box” so they move together as a unit. For greater strength and durability steel IBeam crossmembers are welded on 12 in. centers. Steel reinforced mainbeams, structural steel siderails and steel front and rear skirts complete the heavyduty design. For more information, call 800/633-6551 x826 or visit www.fontainetrailer.com 

The four new Xcalibur extendable models are 53 ft. in the closed position and 90 ft. fully opened.

Curry, Versatran Continue Partnership With 6T Retriever As soon as Versatran launched its new 6T Retriever, its partner and one of the largest commercial truck manufacturers in the United States, Curry Supply, announced that the product would be included in its own offering as well. The 6T Retriever brings to the table all the features of its predecessors, the 15T and 20T Retrievers, but does not require drivers to possess CDL licenses. Curry Supply currently is taking preorders for the 6T from customers across the country. For customers across the nation looking to save time and money on hauling and delivery of equipment and materials and maintenance of vehicles, the Retriever line has been the all-in-one solution, according to the manufacturer. It has a high degree of flexibility and a nimble design that features an air-operated curved platform, a low center of gravity and shallow loading angle. These features translate directly into enhanced hauling capacity, rapid cycle times, swift deck and ramp deployment, and idle-free system operation.

All these benefits used to be reserved exclusively for customers with CDL licenses, but not anymore. With its hauling capacity of up to 12,000 lbs. of payload, the nonCDL 6T takes things to the next level, the manufacturer said. As Jeff Shaw, vice president of sales and marketing, of Curry Supply put it: “We are excited to announce that our offer of Versatran products has been upgraded to include its latest product, the non-CDL 6T. This expansion of the Retriever pack enables us to help a larger and more diverse base of clients achieve higher ROI while taking advantage of the latest developments in the industry, as epitomized by Versatran’s entire Retriever line. “We have excellent shipping capabilities and customers who order their Retriever from us now can expect delivery as early as late summer.” For more information, call 800/345-2829, email sales@currysupply.com or visit www.currysupply.com. 

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV 7KDQN <RX WR DOO ZKR YLVLWHG RXU %RRWK .

5,> :39 :LSM 3VHKPUN 9LLS )7 6/5

5,> 7*+ 7VSL *HYNV +\TW )7 3&'

=PZP[ ^^^ MLSSPUN JVT *,. ,THPS [YHPSLYZ'MLSSPUN JVT *HSS

Page 54 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 55

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (WORLDWIDE): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE INTERESTED TO BUY CAT USED WHEEL LOADER 916, 926, 936, 950B/E, 966E/D/F, 970F, 980C, 980F. IF AVAILABLE PLEASE EMAIL US: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE LOOKING TO BUY A COUPLE OF UNITS OF HITACHI EXCAVATORS EX 330-5 & EX 450-5. IF YOU HAVE ANY OF THEM AVAILABLE PLEASE LET ME KNOW THROUGH EMAIL EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR MOTOR GRADERS - WE ARE INTERESTED TO BUY CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS. WE ARE LOOKING TO BUY CAT 966F, CAT 966FII, CAT 980C, AND CAT 980F. EMAIL: AHMED@IUKANDCO.COM: PHONE: 300-369-5360 –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE.. MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VWERIZON.NETR; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 ––––––––––––––––––––––––––––––––

WANTED (WV): NELSON 6000 WELDERS - LOOKING FOR NELSON DUAL GUN SYSTEM WITH GEN SET AND TRAILER, AND/OR PRO-WELD DUAL GUN ARC 3000 MACHINE. EMAIL: WEH@TRIANGLEINCORPORATED.COM; PHONE: 304-562-6282 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CHALLENGER 85C TRACTORS - I AM IN NEED OF A USED SET OF TRACKS FOR ANY OF THE CAT CHALLENGER 65, 75 OR 85C. EMAIL: PI2279@YAHOO.COM; PHONE: 319-470-8388 –––––––––––––––––––––––––––––––– WANTED (MA): ALL MODELS CATERPILLAR EXCAVATORS - LOWER SUPPORT RAIL GOES FRONT TO BACK RIGHT SIDE AND TOOL BOX RH SIDE LOWER RAIL THAT GOES FRONT TO BACK SUPPORTING TOOL BOX. EMAIL: BILLD@TDICENZO.COM; PHONE: 207-214-9610 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX270,EX300,EX330,EX400,EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE LOOKING FOR CAT 966F, CAT 980C, CAT 980F AND CAT 966E/D. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS, MODEL 580SK, 580L, 580LII, 580SL, 580SLII, 580M, 580MII, 580MIII 580SMII, 580SMIII, 580SMIII EMAIL: FRANKHORAN@GROFFTRACTOR.COM; PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY USED HITACHI EXCAVATORS EX200LC, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODELS. I NEED TO BUY CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH ––––––––––––––––––––––––––––––––

WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 ––––––––––––––––––––––––––––––––

WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S-3 OFF-HIGHWAY TRUCKS LOOKING FOR REAR END DIFFERENTIAL FOR 30 TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 ––––––––––––––––––––––––––––––––

Page 56 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Timed Online October 16 - 21, 2021 For: Real Estate & Light Construction • Syracuse, NY Thurs., October 21, 2021 For: Real Estate • Plymouth, MA Sat., October 23, 2021 For: Snow, Construction, Utility Equipment & more • Online Thurs., October 28, 2021 For: Late Model Construction Equipment & more (Mexico) • Newport, VT Fri., October 29, 2021 For: 1-Owner Very Good Construction Equipment • Edison, NJ Sat., October 30, 2021 For: Paving, Construction & Utility Equipment & more • Syracuse, NY Fri., November 5, 2021 For: Construction & Utility Equipment & more • Syracuse, NY Sat., November 6, 2021 For: Large Rental Return Construction Equipment & more • Palermo, NY Sun., November 7, 2021 For: Construction & Utility Equipment & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Saskatoon, SK October 19, 2021 • Upton, MA October 19, 2021 • Decatur, AL November 3, 2021 • Orlando, FL November 4, 2021 • Houston, TX November 9-11, 2021 • Orlando, FL November 17-18, 2021 • Tipton, CA November 19, 2021 • Las Vegas, NV November 23, 2021 • Southeast Regional Event December 3, 2021 • Fort Worth, TX December 7-8, 2021 • Phoenix, AZ December 8, 2021 • Sacramento, CA December 8, 2021 • Great Plains Regional Event December 9, 2021 • Northeast Regional Event December 14-15, 2021

ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • ONLINE Ending October 12, 2021 For: Town of Wallkill, NY Surplus Auction • ONLINE Ending October 19, 2021 For: Town of Rhinebeck, NY Surplus Auction AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401 • ONLINE October 4 - 10, 2021 • ONLINE October 11 - 17, 2021 • ONLINE October 18 - 24, 2021 • ONLINE October 25 - 31, 2021 • ONLINE November 1 - 7, 2021 • ONLINE November 8 - 14, 2021 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • ONLINE Fri., October 22, 2021 For: Woodburn Equipment Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE October 12, 2021 • ONLINE October 19, 2021 • ONLINE October 26, 2021 • ONLINE November 2, 2021 • ONLINE November 9, 2021 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE October 13, 2021 • ONLINE October 20, 2021 • ONLINE October 27, 2021 • ONLINE November 3, 2021 • ONLINE November 10, 2021 BLACK STAR ACA www.blackstaraca.com 800-610-2192 • Live Virtual October 22, 2021 • Live Virtual October 27, 2021

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DEANCO AUCTIONEERS www.deancoauction.com 601-656-9768 • Philadelphia, MS November 17 - 18, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction FREY & SONS, INC. www.freyandsons.com 419-455-3739 • ONLINE October 5 - 13, 2021 For: Asphalt Equipment, Ready-Mix Trucks & More! HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., October 15, 2021 For: Truck, Trailer & Equipment Auction • Marietta, PA Fri., December 10, 2021 For: Truck, Trailer & Equipment Auction HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Fairview, PA Wed., October 13, 2021 For: Surplus Liquidation, Network Company. No Onsite Bidding I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Online Only Wed., October 27, 2021 For: Truck, Trailer & Attachment Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Online Only – Timed Tues., October 12, 2021 For: Public Equipment Auction • Online Only – Timed Wed., October 13, 2021 For: Public Equipment Auction • Online Only – Timed Thurs., October 14, 2021 For: Ken Porter Auction • Online Only – Timed Tues., October 19, 2021 For: Public Equipment Auction • Online Only – Timed Tues., October 26, 2021 For: Public Equipment Auction

• Online Only – Timed Thurs., October 28, 2021 For: First Capital J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864 • Live Virtual Online October 21, 2021 For: Heavy Equipment • Live Virtual Online November 18, 2021 For: Heavy Equipment JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • Online Only December 2 - 9, 2021 For: Kenmore Heavy Equipment, Contractors Equipment, Trucks & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE Tues., October 12, 2021 For: Performance Drilling Public Online Auction • Stanton, TX Wed., October 13, 2021 For: Fall West Texas Unreserved Construction & Transportation Auction • Gillsville, GA Tues., October 26, 2021 For: Contractor Inventory Reduction Auction JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Greenville, SC Sat., October 23, 2021 For: Roddy Farms • Carrollton, GA Sat., November 6, 2021 For: William Garrett Retirement Auction • Douglasville, GA Wed., November 10, 2021 For: Atlantis Commercial Group Inc Fleet Realignment Auction KING AUCTION & REALTY CO. www.bidkingauctions.com 800-359-5608 • Burnsville, NC Sat., October 23, 2021 For: Total Liquidation of Westside Equipment Rental

LlOYD MEEKINS & SONS AUCTION CO. www.meekinsauction.com 910-739-0547 • Lumberton, NC Tues., December 28, 2021 For: 27th Annual Construction, Truck, Farm Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE Tues., October 12, 2021 For: Government Auction • ONLINE Tues., October 12, 2021 For: Kansas Turnpike Authority Auction • ONLINE Wed., October 13, 2021 For: Ag Equipment Auction • ONLINE Wed., October 13, 2021 For: Gutsch Farms Retirement Auction • ONLINE Thurs., October 14, 2021 For: Truck & Trailer Auction • ONLINE Tues., October 19, 2021 For: Kansas Department of Transportation Auction • ONLINE Wed., October 20, 2021 For: Vehicle & Equipment Auction • ONLINE Thurs., October 21, 2021 For: Construction Equipment Auction • ONLINE Tues., October 26, 2021 For: Government Auction

• Timed Online October 6 - 13, 2021 For: Badlands Power Fuels Inventory Reduction Auction • Timed Online October 6 - 13, 2021 For: Haugen Masonry Retirement Auction • Timed Online October 14 - 21, 2021 For: Aluminum Concrete Forms Auction • Timed Online October 15 - 20, 2021 For: Online Steffes Auction • Timed Online October 19 - 26, 2021 For: Jerome Trucking Equipment Reduction Auction • Timed Online October 21 - 28, 2021 For: Dirt Dynamics Inventory Update Auction • Timed Online November 5 - 10, 2021 For: Online Steffes Auction Upper Midwest Locations • Timed Online November 19 - 24, 2021 For: Online Steffes Auction Upper Midwest Locations VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Lake Elsinore, CA Sat., November 13, 2021 For: Heavy Construction Equipment and more WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760

ROSEN & COMPANY, INC. www.rosenandcompany.com 216-990-1831 • North Randall, OH Thurs., October 21, 2021 For: T&M Of Northern Ohio Inc., Retirement Auction

• Online Fri., December 3, 2021 For: Online & Absentee Bidding Only

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Bloomfield, CT Thurs., November 4, 2021 For: King Construction Inc. Complete Dispersal Retirement Auction

• Virtual Online Sat., November 13, 2021 For: Public Auction

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online October 5 - 12, 2021 For: Multi-Party Construction Auction • Timed Online October 5 - 12, 2021 For: Steffes Truck & Transportation Auction

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300

YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Online Only Thurs., October 21, 2021 For: Kentucky Timed Online Parts Auction • Kissimmee, FL Thurs., November 3, 2021 For: Unreserved Public Auction • Mt. Sterling, KY Thurs., November 11, 2021 For: Fall Kentucky Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 57

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. OCTOBER/NOVEMBER 2021 CRANE SAFETY COURSES October 11 – October 15, 2021 Qualified Rigger & Signal Person Training, Houston, TX October 12 – October 14, 2021 Forklift Train the Trainer, Orlando, FL October 12 – October 15, 2021 Overhead Crane Inspector Training, Cincinnati, OH October 18 – October 21, 2021 Overhead Crane Train The Trainer, Houston, TX October 20 – October 22, 2021 Tower Crane Operator & Inspector Training, Orlando, FL October 20 – October 22, 2021 Qualified Rigger Level 2 Training, Cincinnati, OH October 25 – October 29, 2021 Mobile Crane Train The Trainer, Orlando, FL October 26 – October 28, 2021 Rigging Inspector Training, Cincinnati, OH October 26 – October 29, 2021 Mobile Crane Inspector Training, Houston, TX November 1 – November 5, 2021 Overhead Hoist Maintenance Training, Orlando, FL November 2 – November 5, 2021 Overhead Crane Inspector Training, Cincinnati, OH November 8 – November 12, 2021 Mobile Crane Train The Trainer, Houston, TX November 8 – November 12, 2021 Mobile Crane Inspector Training, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com COMMON GROUND ALLIANCE (CGA) 2021 Common Ground Alliance Conference & Expo Dates: October 12 – 15, 2021 Location: Renaissance Orlando at SeaWorld 6677 Sea Harbor Drive, Orlando, FL 32821 Description: The 2021 CGA Conference & Expo is the premier event for damage prevention stakeholders to network, gain knowledge, and learn about the latest industry data and technology. The conference, to be held at the Renaissance Orlando at SeaWorld® October 12-15, 2021, will foster the education and networking needs of all attendees in the damage prevention industry. The event will feature integrated committee meetings, industry-leading speakers, carefully curated breakout sessions and discussion groups, an interactive exhibit hall, and networking events and opportunities. Most importantly, this event will facilitate the development of concrete actions the industry can use to help reduce damages. Registration is now open. For more information on the 2021 CGA Conference & Expo, please visit https://cgaconference.com/. For questions regarding your registration, please contact Customer Service by email: CGARegistration@CompleteReg.com or phone: 571-384-2922. ASSOCIATON GENERAL CONTRACTORS OF AMERICA (AGC) National Construction Industry Workforce Summit Date: October 13, 2021 Location: St. Louis, MO Description: AGC of America’s inaugural National Construction Industry Workforce Summit is designed to bring together leaders in the construction and workforce development community to focus on establishing solutions to chronic worker shortages in the industry. During this day-long summit, construction and workforce development professionals will learn about successful programs that are helping recruit, develop and retain high-quality construction professionals. Attendees will work together to address specific workforce challenges, like crafting a message for caregivers that construction careers are the right choice for their children and attracting more women into the industry. The goals of the summit are to identify a more consistent approach that industry should take to improve the workforce pipeline, leverage existing strategies proven successful, and make connections that provide support and resources to attendees to continue addressing workforce development issues long after the summit ends. Who Should Attend: General and specialty contractor staff involved in workforce development; construction industry association leaders and other professionals involved in workforce; construction educators. Why Attend: The inaugural National Construction Industry Workforce Summit offers a unique opportunity to learn about successful workforce development efforts, network with contractors, association leaders and educators who are involved in workforce development and help develop new nationwide solutions to chronic construction labor shortages. Registration is now open. Registration Fee: $150 For more information visit https://hrted.agc.org/workforce-summit/.

SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION (SMACNA) 2021 SMACNA Annual Conference Dates: Octoberr 24 – 27, 2021 Location: Marriott World Center, Maui, Hawaii The 2021 SMACNA Annual Convention is being held in person October 24-27, 2021 in Maui, Hawaii. This year will be different in many respects, yet we will find comfort in the high-quality networking and educational experience members have come to expect. Almost all differences experienced this year will be a result of a higher focus on safety in accordance with hotel, local and state mandated policies. Registration is now open! SMACNA exists to address issues common to member firms that impact the industry nationally and internationally. The association serves members' needs to improve their business environment through industry education, labor relations, standards, industry representation and business studies. For more information and to register, visit http://www.smacna.org/. ASSOCIATON GENERAL CONTRACTORS OF AMERICA (AGC) Federal Contractors Conference: Part 2 (In-Person) Date: November 8-9, 2021 Location: Ritz-Carlton Hotel Washington, DC Description: AGC is excited to announce that we will be hosting the 2021 Federal Contractors Conference November 8 - 9, 2021 in Washington, D.C. at The Ritz-Carlton. Our primary focus is the health and safety of our conference participants. We greatly appreciate your support of this conference. The latest project forecasts, expert insight on upcoming regulatory hurdles, and ample networking opportunities with agency decision makers are critical to being competitive in the federal construction market. Unlike other events, the AGC Federal Contractors Conference brings federal agencies directly to the table alongside attendees to generate more candid dialogue and fewer generic presentations. In addition to agency budget and policy overviews, the conference focuses on addressing specific issues facing the construction industry and particular agencies from public-private partnerships to source selection; multiple award contracts to small business; and design-build to bonding. The conference is not a “one and done” event. It serves as part of an ongoing dialogue that AGC members and federal agency personnel continue throughout the year. Attendees are encouraged to take part in that dialogue with AGC. Registration is now open. Price (Members): $525 // Price (Non-Members): $685 (Students – Please contact meetings@agc.org to take advantage of the student discount and register for $100) For more information and to register, visit https://fedcon.agc.org/ ASSOCIATION OF EQUIPMENT MANUFACTURERS (AEM) 2021 AEM Annual Conference Dates: November 10-12, 2021 Location: JW Marriott Phoenix Desert Ridge Resort & Spa 5350 E Marriott Dr, Phoenix, AZ 85054 The Association of Equipment Manufacturers (AEM) 2021 Annual Conference delivers a single place for you to gather with your peers to examine what this transformational decade will mean for your organization and the equipment manufacturing industry. Top reasons to attend: Networking and direct conversations • As always, there will be opportunities for crucial networking, but also discussions with suppliers, peers and subject matter experts that help us prepare for the new landscape our industry faces. • Feedback from your customers This year, we are offering roundtable discussions with OEMs and end-users. In these roundtables, we will address the most important and relevant data on the future of the industry in a space where customers can provide honest input and exchange ideas for improvement and action. • Industry perspectives on today and tomorrow A full schedule of insightful sessions, small-group roundtables, and candid conversations with CEOs who are shaping the equipment manufacturing industry right now and in the future. Topics will include culture, sustainability, corporate responsibility, leadership and the post-covid workforce, just to name a few. Registration is now open! Please contact Carla Mann at cmann@aem.org or (414) 2984162 if you have any questions.. For additional information and to register, visit https://www.aem.org/events/conferences-and-webinars/annualconference. MINNESOTA ASPHALT PAVEMENT ASSOCIATION (MAPA) 2021 Minnesota Asphalt Conference Date: December 2, 2021 Location: Minneapolis Marriott Northwest (formerly Northland) 7025 Northland Dr. North, Minneapolis, MN 55428 Description: MAPA members are committed to the state and its overall quality of life. The industry is comprised of companies ranging from small driveway – paving operations to diverse larger construction companies that produce and/or place asphalt pavement on roads, airports, parking lots, recreational facilities, etc. It is MAPA's mission to serve our members by advancing the technology of asphalt pavement to their customers. We strive to accomplish this mission with our staff of Professional Engineers by providing technical assistance, training, and consultation. Join us at the Minneapolis Marriott Northwest to hear from our expert speakers on topics you don't want to miss! Registration to open SOON. For more information, please visit https://asphaltisbest.com/. Contact MAPA Staff at info@mnapa.org.

Events are subject to change, check websites for updates

The 2022 HCEA Calendar Is Available!

Featuring 12 beautifully restored 8”” x 10” black-and-white photographs of construction and m mining machiner y fro the early and mid 20th Centur y. Available

It’s the only calendar of this type oﬀ ﬀer ered! Order yours today!

NOW!

ONL LY Y $10 EACH, POSTAGE G PAID PAID WITHIN THE US SA* * $4.50 US postage for one calendar to Canada, $8.00 for all other countries. Call for quantity rate

Order onlline i at ht tp:/ // /store.hc hceastore.com/calendars .html, by ma p a y m e n t m a d e t o t h e H C E A a t 1 6 6 2 3 L i b e r t y H i Ro a d , B o w l i n g G r e e n , O h i o 4 3 4 0 2 , o r w i t h yo u r c r e d i t c a r d b y p h o n e a t 4 1 9 - 3 5 2 - 5 6 1 6 .

Dealers! Contractors! Produc cers! Customized for your business

Promote your bu usin siness year a -round with your own customized HCEA Calendars! Custom imprints avvail ailable in quan ntities of 50 0 aatt discounted price.

Call us at 419-352-56 616 for details.

Makes a great holiday gift!

THANK YOU FOR YOUR SUPPORT!

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

SEE YOUR BARGAIN AD IN COLOR.

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 21-22 EB

ONLY $60 EXTRA FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

Page 58 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT....................................................................2 AED SUMMIT/CONDEX .................................................................13 AMULET .....................................................................................36,38 ASTEC KPI-JCI ...............................................................................23 ASTEC/ROADTEC ..........................................................................59 BANDIT INDUSTRIES INC .............................................................28 BARGAINS ......................................................................................57 BOMAG AMERICAS INC ..................................................................2 BOYER EQUIPMENT......................................................................33 CEG SCALE MODELS....................................................................29 CENTURY EQUIPMENT.................................................................27 CONSTRUCTION EQUIPMENT GUIDE....................34,40,44,52,55 DIAMOND A EQUIPMENT................................................................6 DITCH WITCH OF ARIZONA..........................................................12 DOMINION EQUIPMENT PARTS...................................................36 DOOSAN ....................................................................................18,19 DOOSAN PORTABLE POWER ......................................................48 ESCO CORP ...................................................................................41 FAE USA INC...................................................................................26 FELLING TRAILERS .......................................................................53 FISHER TOOLS...............................................................................11 FLANGE LOCK..................................................................................9 FLUID CONTROL SERVICES ........................................................10 HCEA ...............................................................................................57 HENDRIX MACHINERY LLC ............................................................3 HYUNDAI CONSTRUCTION EQUIPMENT ..............................14,15 JJ SCHECKEL CORP .......................................................................5 KIRBY-SMITH MACHINERY INC....................................................60 KOBELCO CONSTRUCTION MACHINERY ............................42,43 KOMATSU AMERICA CORP ..........................................................49 LABOUNTY MANUFACTURING INC .............................................37 LINK-BELT EXCAVATORS.........................................................30,31 MAGELLAN CONSTRUCTION.......................................................54 MANITOWOC CRANE GROUP .....................................................45 MB AMERICA INC ...........................................................................26 METSO OUTOTEC .........................................................................25 NORAM.......................................................................................46,47 ROAD BUILDERS MACHINERY ......................................................7 SCHAEFER ENTERPRISES ..........................................................38

SENNEBOGEN ...............................................................................22 SMH GROUP-US ............................................................................24 SUMMIT SUPPLY LLC....................................................................10 SUPERIOR EQUIPMENT ...............................................................12 TERAN INDUSTRIES INC ..............................................................39 YANMAR AMERICA CORP.............................................................17 YOUNG CORPORATION................................................................44 TEXAS SUPPLEMENT BANE MACHINERY ........................................................................24 BEE EQUIPMENT SALES LTD ......................................................16 BOTTOMLINE EQUIPMENT LLC...................................................12 CLOSNER EQUIPMENT CO INC...................................................20 COMPACT CONSTRUCTION EQUIPMENT ................................13 CONSTRUCTION EQUIPMENT GUIDE ........................................21 GOMACO CORP.............................................................................23 GORILLA HAMMERS........................................................................1 HIGH TECH INDUSTRIES................................................................1 J & B PAVELKA INC........................................................................12 JCB INC .............................................................................................7 KIRBY-SMITH MACHINERY INC....................................................19 MCCOURT EQUIPMENT INC ..........................................................9 NIECE EQUIPMENT .......................................................................15 NUECES POWER EQUIPMENT ...............................................11,16 POWERSCREEN TEXAS ...............................................................17 ROMCO EQUIPMENT CO................................................................2 TROPHY TRACTOR .........................................................................3 VERMEER OF TEXAS-LOUISIANA .................................................5 WAUKESHA-PEARCE INDUSTRIES INC .......................................6 UTAH SUPPLEMENT CENTURY EQUIPMENT...................................................................2 CONSTRUCTION EQUIPMENT GUIDE ..........................................7 HONNEN EQUIPMENT CO..............................................................5 HOWE RENTAL & SALES ................................................................5 PIRTEK ..............................................................................................5 RASMUSSEN EQUIPMENT CO.......................................................3 UTAH TRACK AND WELDING .........................................................1 WHEELER CAT .................................................................................8

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 10, 2021 • Page 59

BUILT TO CONNECT

Efficiency and Productivity Designed with safety and operator comfort in mind, the Shuttle Buggy® SB-3000 material transfer vehicle features adaptive cruise control, bright LED lighting, four-wheel steering for easy transport and ground-level maintenance access for added convenience. Operators can rely on clear sightlines and the ground operator is safely protected inside the structure of the machine. The Roadtec SB-3000 is the perfect blend of traditional craftsmanship and modern technology.

astecindustries.com

www.goodfellowcorp.com 12451 Old Hwy. 95 Boulder City, NV 89005 702-296-6553 390 N. 2000 W. Lindon, UT 84042 801-669-0388

12639 W. Butler Drive El Mirage, AZ 85335 480-285-8202

www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550

www.modernmachinery.com

Milliken, CO 970-587-1188

Missoula, MT 800-332-1617

Eugene, OR 800-826-9811

Portland, OR 800-950-7779

Durango, CO 970-259-0455

Billings, MT 800-735-2589

Jarome, ID 800-221-5211

Rochester, WA 800-304-4421

Cheyenne, WY 307-634-5149

Boise, ID 800-221-5211

Kent, WA 800-869-2425

Spokane, WA 800-541-0754

Columbia Falls, MT 800-434-4190

Pocatello, ID 800-829-4450

www.closner.com San Antonio Main Branch 21910 FM 2252 Schertz, TX 78154 210-732-2131 Dallas/Ft. Worth Branch 6532 East Hwy 114 Rhome, TX 76078 817-708-9108

Austin Area Branch 13800 FM 973 N Manor, TX 78653 512-272-8200

Page 60 • October 10, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2017 Komatsu PC490LC-11 2015 Wirtgen WR200 XLI

2014 Caterpillar D6T XW CT14025X 2,540 hrs.

KM17155M $269,500 3,189 hrs.

WR15021 $357,500 1,800 hrs.

2006 Komatsu WA200-5L

2017 Komatsu D85EX-18

2014 Komatsu D39PX-23

2012 Komatsu PC360LC10

KM06305U $61,500 8,343 hrs.

KM16523M $399,500 2,059 hrs.

KM14199X

$117,500 2,972 hrs.

KM12252D $118,500 6,700 hrs.

2015 Caterpillar D9T

$219,750

2015 Komatsu PC138USLC-10 KM15152X 4,200 hrs.

$109,500

2006 Komatsu WA200-5L

2016 Komatsu WA470-8

2016 Komatsu PC240LC-11

2017 Deere 644K

CT15767X $569,500 8,364 hrs.

KM06305U $61,500 8,343 hrs.

KM16433X $143,500 7,504 hrs.

KM16519X $157,500 3,383hrs.

$109,250 7,109 hrs.

2008 Caterpillar 963D

2018 Komatsu D65EX-18

2017 John Deere 310LEP

2014 LeeBoy 8510C

CT08803X $139,500 7,139 hrs.

KM18352X $209,500 3,500 hrs.

JD17004J $79,500 1,550 hrs.

LB14006X $79,500 2,219 hrs.

JD17003X

2015 Komatsu HM400-5 KM15268M 10,500 hrs.

$459,500

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • McAlester • Odessa • Waco • Oklahoma City • St. Louis • Tulsa

Contact Terry Lyness for details and pricing.

877.549.7501