West 17 August 20, 2017 by Construction Equipment Guide

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Inside

Western Edition

www.constructionequipmentguide.com

August 20, 2017 • Vol. IX • No. 17 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

MDT Makes Improvements on U.S. Highway 212 By Chuck Harvey CEG CORRESPONDENT

ARTBA’s Bridge Report 10 Years After I-35W Collapse...8

Cashman, Kiewit Introduce Cat Detect Safety System...12

Work has rolled into its ninth month on a $23.2 million Montana Department of Transportation (MDT) project to reconstruct about 9.9 mi. of U.S. Highway 212 from Rockvale to south of Laurel. The stretch of highway is located within Carbon and Yellowstone counties. Funding is through state and federal sources.

“The new alignment was necessary due to the many homes, approaches, railroad and environmental impacts along the existing highway.” Lori Ryan

OTC Wrap Up: ShakeCast, Bridge Improvement...18

Table of Contents ................4 Attachment & Parts Section ......................................13-16 Truck & Trailer Section ........ ......................................27-28 Business Calendar ............32 Recycling Section ........33-41 Auction Section ............44-45 Advertisers Index ..............46

MDT

Montana Department of Transportation photo

The project requires excavation of 2.12-million cu. yds. of dirt and includes installation of about 28,000 ft. of various types and sizes of pipe and culvert for drainage.

The project that began in November 2016 and is expected to finish in August 2018, includes construction of a new road alignment. Crews will construct a twolane roadway, with intermittent four-lane segments between RP 42.5 and RP 52.5. The next and final phase will include four lanes, two in each direction, throughout segment. Workers also will construct the earthwork and drainage features

Feds Fund Hawaii Military Projects On July 13, the Senate Appropriations Committee passed the Military Construction and Veterans Affairs appropriations bill for fiscal year 2018. U.S. Sen. Brian Schatz (D-Hawaii), ranking member of the Senate Military Construction and Veterans Affairs Appropriations Subcommittee, worked to include $266.3 million for military construction and upgrade projects across Hawaii and $78.4 billion that will benefit veterans’ programs, including those in Hawaii. see HAWAII page 22

for the ultimate roadway template of a four-lane divided roadway with a depressed median. The itinerary does not include bridge construction. However, two large reinforced concrete box culverts will be installed. Improvements will be made to the road shoulders. Most of the shoulders will be 4-ft.-wide, but 8ft.-wide shoulders will be available in some sections of the road. The project started with grading,

application of gravel. It proceeds with paving and installation of guardrail, fencing, drainage systems, stock pass culvert, rumble strips, seal and pavement markings. Third Phase The first phase, which began in 2014, included the construction of a grade-separated overpass of the BNSF Railway tracks to replace a see MONTANA page 26

U.S. Navy photo by Denise Emsley, NAVFAC Hawaii Public Affairs

A Navy demolition crew removes a 1970’s metal-framed building from Joint Base Pearl Harbor-Hickam facility inventory. Building debris was segregated for recovery of recyclable materials.

Page 2 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • • • • •

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes

2009 Deere 700J XLT, Clean 2006 Deere 200C LC, exceland tight machine. 4721 lent U/C. 1.3 yd bucket, Hours, Stock# 1225 ..$79,500 Stock# 1226..............$46,500

1998 Franklin 170 Grapple Skidder, 80% on rear tires, front 50%. Winch. 5096 Hours, Stock# 1222 ..$23,450

1994 Deere 690E LC, Needs 2012 Case TV380, 1700 right track drive motor. 8506 Hours, Stock# 1215 ..$30,000 hours. U/C good condition, Stock# 1223..............$19,000

2008 Gyro Trac GT25XP, 50 hours on new tracks. 2753 hours, Stock# 1220 ..$93,900

3872 State Hwy 64 W #353 • Tyler TX 75704

844.505.9947 FOUNDATION DRILL RIGS Compact Size - High Level Performance SALES • RENTAL • SERVICE • FINANCING

4 Tool Boxes Available

All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Why GEAX? • Work where others dare not go: Narrow spaces - Slopes Building interiors - Proximity to power lines. • Avoid wasting time and resources with oversized machines. • Ease of use and speed of set up. • Compact machines save on transport, fuel and maintenance. • Optimize every aspect of production by adapting the equipment to meet all job-site needs.

800-656-6766 • www.hennessyinternational.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 3

"In Business for over 33 Years" 2012 John Deere 310J, Stk#: 10678, EROPS, A/C, 4WD, 4,744 hrs., 36" QC Bkt, Extendahoe, Aux. Hyd., Pilot Controls, 305 / 70Dx16.5 Front Tires, 19.5x24 Rear Tires ......................$39,500

www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla 2014 Sullivan 185CFM, Stk#: 10746, 760 hrs., PSI, 2700 RPM, ST 175x80R13 Tires, JD Español 110 Diesel Eng. ..............................................$9,850

2006 John Deere 410G, Stk#: 10860, OROPS, 4WD, 2,216 hrs., 18" QC Bk, Aux. Hyd., Ext-hoe, 2 Stick Control, 12.5x80x18 Front Tires, 21Lx24 Rear Tires, 4 Cyl. JD Eng ......................$29,500

2014 John Deere 450J LGP, Stk#: 10823, EROPS A/C, FM Stereo, 6 Way Blade, 24" Pads, 1,511 hrs., 9' 7" Wide ............................$72,500

2011 John Deere 550J LGP, Stk#: 10815, EROPS, 2013 John Deere 850K LGP, Stk#: 10832, 2013 Kubota RTV1140, Stk#: 10790, OROPS, A/C, 6 Way Blade, 2,977 hrs., 24" Pads, 10' 4" EROPS, A/C, FM Stereo, St./Tilt Blade, 4,576 4WD, 4 Seat, 25x11-12 Front Tires, 25x10.0012 Rear Tires, 3 Cyl. Kubota Eng. ............$7,500 hrs., 36" Pads, 13 ft. Wide ..................$132,500 Wide ........................................................$69,500

2008 Bomag BW145PD-3, Stk#: 10787, 56" Smooth Drum, 1,113 hrs., 340 / 85Rx24 Tires, 4 Cyl. Deutz Eng. ..................................$26,500

2017 Dynapac CA2500PD, Stk#: 10774, EROPS, A/C, 84" Pad Drum, 4 hrs., 23.1x26 Air Tires, 4 Cyl. Cummins Eng. ..................$89,500

2007 John Deere 650J LGP, Stk#: 10749, 2013 John Deere 650K LGP, Stk#: 10839, 2006 Takeuchi TB145, Stk#: 10782, OROPS, EROPS, Sweeps, Rear & Sides Screens, 6 Way EROPS, A/C, FM Stereo, Sweeps, Side & Rear Screen, 6 Way Blade, 1,874 hrs., 28" Pads, 10' Blade, 5,142 hrs., 24" Pads, 10' 10" Wide .......... 2,818 hrs., 18" Quick Connect Bucket, Aux. Hyd., 9" Wide ..................................................$89,500 ..............................................................$56,500 16" Rubber Tracks, 4 Cyl. YanMar. ..........$22,500

2015 John Deere 5065E, Stk#: 10835, EROPS, A/C, 444 hrs., 74" Front End Loader, 4WD, 9.5x24 Front Tires, 16.9x28 Rear Tires..$36,500

2015 Big Tex Dump, Stk#: 10249, 25,900 lbs. GVWR, Net Pay Load 17,340 lbs., 48" Spread Axle, 2010 John Deere 650J LT, Stk#: 10797, OROPS, 20 ft. L / 4 ft. Walls, 7' 9" W, Folding Rear Gate 6 Way Blade, 3,397 hrs., 18" Pads, 9' 7" Wide .... 1999 Sterling, L85, Stk#: 10521, A/C, 331,769 w/Heavy Duty Ramps, D Rings Inside Trailer, ST235/85R16 Ries, Front Tool Box ..........$14,500 ..............................................................$52,500 Miles, 11Rx24.5 Tires ............................$33,500

2013 Cat 236B3, Stk#: 10827, EROPS, A/C, 701 hrs., 74" Bucket, Aux. Hyd., 12x16.5 Tires, 4 Cyl. Cat Eng ..................................................$29,500

2009 Skytrak 10042, Stk#: 10729, 10,000 lbs., 1999 JLG 601S, Stk#: 10612, 500 lbs., 60 ft., 42 ft., 4WD, 4WS, 1 hrs., Hyd. Self Leveling ...... 4x4, 4WD, 6,475 hrs., 14x17.5 Tires, 4 Cyl. ..............................................................$49,500 Deutz Eng...............................................$16,500

2012 Lay-More SM250, Stk#: 10825, EROPS, A/C, 377 hrs., ST225x75Rx15 Tires, 4 Cyl. Kubota Eng ............................................$21,500

1982 John Deere 670A, Stk#: 10700, EROPS, 4,638 hrs., 14 ft. M/B, Front Scarifier, 14.00x24 Tires, 6 Cyl. JD Eng. ................................$21,500

2014 John Deere 35D, Stk#: 10421, EROPS, A/C & Heat, 1,848 hrs., 12" Bucket, Front Blade, 2015 Cat 262D, Stk#: 10800, EROPS, A/C, 527 Aux. Hyd., 12" Rubber Tracks, Quick Coupler, 3 hrs., 72" Bucket, Aux. Hyd., 12x16.5 Tires, 4 Cyl. Cyl. YanMar Eng. ..................................$36,500 Cat Eng. ....................................................$39,500

2005 JLG 800S, Stk#: 10709, 1,000 lbs., 80 ft., 1,909 hrs., 15x625 Tires, 4 Cyl. Deutz Eng. ........ ..............................................................$49,500

2011 Cat D6T XL, Stk#: HR-574, EROPS, A/C, Semi U Tilt Blade, 4,213 hrs., 24" Pads, 10' 7" Wide ....................................................$159,500

2014 Terex TC75, Stk#: 10763, EROPS, 956 hrs., 73 hp., 18" Quick Connect Bucket, Aux. Hyd., 18" Rubber Tracks, 91" Push Blade, 4 Cyl. Deutz Eng ..............................................$52,500

1994 Magna One 425 KW, Stk#: 001G, 2007 Ditch Witch RT40, Stk#: 9990, 1,132 hrs., Synchronove A/C Generator Model 502FDR 3 6" Trench, 26x12.00x12 Tires, 3 Cyl. Deutz Eng .... Phase, 2.7 Field AMPS, 425 KW, 531 KVA With ................................................................$16,500 Kohler Power System, Detroit Diesel ......$6,500

2016 John Deere 650 K, Stk#: HR-788, EROPS, A/C, Heat, 6 Way Blade, 571 hrs., 28” Pads, 95% U/C, 9’ 7” Wide ......................................$139,500

2010 Military Hummer, Stk#: 10792, 1,168 2010 Ditch Witch RT45, Stk#: 10660, 813 hrs., 2008 Skytrak 10054, Stk#: 10707, 10,000 lbs., Miles, 4-Door, 4x4, Auto Trasmission, Power 54 ft., 4WD, 3,544 hrs., 72" Forks, 62" Frame, Steering, 27x12.50Rx16.5L Tires, Certified Rebuilt 12" Trench, Slide Boom, 64" 6 Way Blade, 26 / 14x24 Tires, 4 Cyl. Cummins Eng. ........$59,500 2010 Gov. Title ........................................$29,500 1200x12 Tires, 3 Cyl. Deutz Eng. ..........$18,500

2011 Doosan G25E-5, Stk#: 10455, 4,600 lbs., 7 ft., 42" Forks, 45" Frame, 5,681 hrs., 7.00x15 Front and 6.50x10 Rear Hard Rubber Tires, Doosan DOHC, 16V Gas Eng. ................$14,500

2016 Kobelco SK210LC-9, Stk# HR-701, EROPS, A/C, FM Stereo, 14 hrs., 42" Bucket, 10'6" Wide, 32" Pads ..........................$146,500

2006 John Deere 700J XLT, Stk#: 10716, EROPS, A/C & Heat, Eng. Encl., 6 Way Blade, 9,562 hrs., 70% U/C, 22" Pads, 10 ft. Wide...............$69,500

2014 Terex TC50, Stk#: 10765, EROPS, Heat, 702 hrs., 39 hp., 24" Quick Connect Bucket w/Hyd. Thumb, Aux. Hyd., 16" Rubber Tracks, 78" Push Blade, 4 Cyl. YanMar Eng. ......$39,500

2015 Terex TC37, Stk#: 10773, EROPS, A/C, 32hp., 9 hrs., 18" Bucket, Aux. Hyd., 69" Push Blade, 12" Rubber Tracks, 4 Cyl. Mitsubishi Eng. ..............................................................$46,500

Page 4 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

WESTERN EDITION Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES 7

TEREX HOSTS GOV. FALLIN, REP. RUSSELL TO DISCUSS JOBS

It’s not very common for a governor and a congressman to brave a

manufacturing factory in the middle of summer — especially when

temperatures exceed 100 degrees Fahrenheit — but Oklahoma Gov. Mary Fallin and Rep. Steve Russell did just that on July 21 when they visited the

22 ENTREPRENEUR’S GLOBAL 200 LIST RANKS

Terex facility to talk about manufacturing jobs in America.

BRIDGE REPORT: TEN YEARS AFTER I-35W COLLAPSE

Aug. 1 marked the 10th anniversary of the I-35W bridge collapse in Minneapolis. The bridge was classified as “structurally deficient” and was

PIRTEK AS PREEMINENT WORLD FRANCHISE PIRTEK USA, a leader in fluid transfer solutions, is the 65th most highly rated franchise in the world, according to a recent ranking by Entrepreneur magazine.

How much is your safety worth to you? How much is the safety of your

36 GRINDERCRUSHERSCREEN UNVEILS

The Mack Masters Competition, a biennial event designed to evaluate participants’ knowledge of Mack’s service systems and procedures, has concluded with a new team earning the right to call themselves Mack Masters champions.

Felling Trailers Inc. has recently received ISO 9001:2015 Certification for its quality management system for its Sauk Centre, Minn., and Litchfield, Minn., operations.

EARTHQUAKES

28 TRAIL KING PROMOTES ANDERSON

include a presentation on the Oklahoma Department of Transportation’s new system for inspecting bridges after earthquakes, an update on improving

TO VEEP OF HUMAN RESOURCES

near Keystone Dam in Tulsa County and rehabilitate bridges on SH-117 in

Creek County and U.S.-69 in McIntosh County.

retention and safety improvements.

bridge conditions and approval of contracts to replace a U.S.-412/U.S.-64 bridge

18 SHAKECAST SOFTWARE REFINES BRIDGE INSPECTION State bridge inspectors will be able to provide a faster, more targeted response in ensuring public safety the next time an earthquake rolls

33 URBANIZATION CREATES CHALLENGES IN CRUSHING BUSINESS

Edwin M. McKeon Sr. Dennis Hogeboom Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon

Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Facebook

Twitter

32 BUSINESS CALENDAR 42 CLASSIFIEDS 44 COMING AUCTIONS

13 13 14 16

JOHN DEERE High-Capacity Buckets ARDCO AMT Pipe Trailer Attachment BANDIT Skid Steer Loader Attachments VACUWORX SL 2 Subcompact Vacuum Lifting System

Kent Hogeboom

Dennis Hogeboom

Patrick Kiel

Debbie Hansen

National Sales Manager

• Colorado• Louisiana • Oklahoma • Texas • New Mexico

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

602/679-8759 e-mail dennishogeboom@cegltd.com

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

www.constructionequipmentguide.com

Mobile

DEPARTMENTS

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

WITH ROCK COMMANDER

EQUIPMENT

RECYCLING SECTION

across Oklahoma. Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.

40 JUNJIN AMERICA’S SUCCESS CONTINUES

9001 CERTIFICATION

and age is typically, “Priceless.”

Highlights of the Oklahoma Transportation Commission’s Aug. 7 meeting

PRODUCT REDUCTION TECHNOLOGY

28 FELLING TRAILERS ANNOUNCES ITS ISO

coworkers worth to you? Your employees? Fortunately, the answer in this day

18 OTC: BRIDGES IMPROVING, WITHSTANDING

34 IROCK’S TS-512 OFFERS HASSLE-FREE

27 MACK TRUCKS ANNOUNCES 2017 MACK MASTERS CHAMPIONS

CAT DETECT SYSTEM

MANAGEMENT SOLUTIONS

SETUP, PORTABILITY

undergoing repair at the time.

12 CASHMAN, KIEWIT ENHANCE SAFETY WITH

34 TEREX LAUNCHES AQUACLEAR WATER

YouTube

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

702/239-0348 e-mail dhansen@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 5

> ÊÕ

> ÕÃ ÃÊÌ `>Þ `> >Þ ÞttÊ ÀÀÞ Þ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

www ww w.R .RBused.com

Celeb brating tiing g our 30th Yea Year!!

2010 KOMATSU D39PX-22, #92323, OROPS | 6-WAY BLADE | 3,800 HRS ....................$62,500

2014 KOMATSU D51PXI-22, #82902, CAB/AC | 28" TRACKS | TOPCON 915SS ANTENNA | 2,100 HRS........................................................$199,750

2003 KOMATSU PC200 LC-7, #92106, CAB/AC | 31.5" TRACKS | 9'7" ARM | AUX HYD'S | 6,200 HRS..........................................................$89,500

2006 KOMATSU WA600-3, #81553, CAB/AC | 8YD SPADE NOSE BKT W/ TEETH | 35/65R33 TIRES | 5,100 HRS ................................$399,500

1996 KOMATSU CD50-1, #82661, CD60-1 PROTOTYPE UNIT W/ TAILGATE | METAL SHOES | 4,800 HRS ..............................................$69,500

2010 KOMATSU GD655-3E0, #82967, CAB/AC | 17.5R25 TIRES | 14' MOLDBOARD | 3,100 HRS .. ..............................................................$159,500

Page 6 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Grove GMK3055 Tri-Axle Mobile Crane, 1:50 scale - $215

Komatsu PC200-8 Excavator, 1:50 scale - $140

Caterpillar 340D L Excavator, 1:50 scale - $115

Allis Chalmers TS-300 Motor Scraper, 1:50 scale - $105

Allis Chalmers 45 Motor Grader, 1:50 scale - $105

Peterbilt 367 Red Dump Truck, 1:50 scale - $100

Samsung SE210LC-3 Excavator, 1:40 scale - $100

Caterpillar 323D Excavator, 1:50 scale - $95

Caterpillar 528 Log Skidder, 1:50 scale - $90

Caterpillar 966A Wheel Loader, 1:50 scale - $80

Hamm 2210-SSD Padfoot Roller, 1:25 scale - $70

Bobcat TL470 Telehandler, 1:32 scale - $70

JLG 60H Boom Lift, 1:40 scale - $50

John Deere 744H Wheel Loader, 1:50 scale - $45

Case CX210 Excavator, 1:50 scale - $45

Bomag BW213D-3 Single Drum Vibratory Roller, 1:50 scale - $45

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 7

Terex Hosts Gov. Fallin, Rep. Russell to Discuss Jobs It’s not very common for a governor and a congressman to brave a manufacturing factory in the middle of summer — especially when temperatures exceed 100 degrees Fahrenheit — but Oklahoma Gov. Mary Fallin and Rep. Steve Russell did just that on July 21 when they visited the Terex facility to talk about manufacturing jobs in America. They were joined by John Garrison, CEO and president of Terex Corporation, and Dennis Slater, president of the Association of Equipment Manufacturers (AEM). The visit was part of an event called “I Make America,” co-sponsored by AEM and Terex. Terex was chosen for this visit because it recently moved a significant portion of its manufacturing operations to its plant in Oklahoma. The facility boasts 700,000 sq.-ft. of operational space. Over the past two years, Terex has invested more than forty-million dollars into the facility, including the renovation of a largescale training center, as well as quality-of-life improvements, like the addition of atmospherically-tuned fans designed to keep team members cool. Terex’s investment has already seen immediate positive results: it is now the only Terex facility in the world capable of producing heavy equipment for all three segments of the company. The three seg- “You know what I ments include Terex cranes, Genie aerial like about this place? work platforms and You don’t just make material processing. “You know what I stuff. You make stuff like about this place?” Rep. Russell said. “You that makes stuff.” don’t just make stuff. Rep. Steve Russell You make stuff that Oklahoma makes stuff.” After the tour of the facility, Gov. Fallin and Rep. Russell attended a rally in the new training center, where they were able to speak to all Terex team members. During the question and answer period, one of the team members asked Gov. Fallin what can be done about workforce readiness in the state of Oklahoma — and beyond. “Manufacturing is not what grandfather’s manufacturing was,” Fallin said. “If you want to go into a nice company like this, you have to have some education and training and some work skills to get a job here.” Fallin said the nation must do a better job in providing the right work skills for today’s jobs. She said the solution is filling the middle skills gap. She explained that the middle skills gap is where a worker needs additional training beyond a high school diploma, but not a full college degree. She stated that by 2025, 77 percent of all American jobs will require additional education beyond high school. Russell said the Terex team members were proving the fact that there are jobs out there for people who want to learn the skills. Terex takes team member training seriously, and it shows. see JOBS page 26

THE

END IS NEAR

Time is running out. Don’t miss this opportunity to grab a Tier 3 Flex portable air compressor before they’re gone. Tier 3 units are still available from 750 to 1800 cfm, pressures up to 500 psi. In order to secure your Tier 3 Flex machine, orders must be placed prior to September 1st. Order now before it’s too late... All Tier 3 machines must be completed prior to December 31, 2017 LEARN MORE AT:

www.Sullivan-Palatek.com

(219) 874.2497

Page 8 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bridge Report: Ten Years After I-35W Collapse Aug. 1 marked the 10th anniversary of the I-35W bridge collapse in Minneapolis. The bridge was classified as “structurally deficient” and was undergoing repair at the time. The American Road & Transportation Builders Association (ARTBA) has looked at federal government data to see what progress has been made in repairing the nation’s bridges in the decade since the collapse. States have devoted significant resources to bridge work, ARTBA said. The value of bridge construction increased 39 percent, from $23.2 billion in 2007 August 1 marked the 10th anniversary of the I-35W bridge collapse. to $32.3 billion in 2016, according to the U.S. Census Bureau. During the Structurally deficient bridges, by state 2007 to 2016 same time period, highway and street Rank 2007 2016 construction activity increased just 8 percent, from $54.6 billion to $59.2 State number of number of number of % change in reduction in number of structurally structurally billion. bridges bridges structurally number of number of structurally deficient deficient deficient structurally structurally deficient bridges as bridges Despite the ramp up in investment, bridges deficient deficient bridges % of total as % of total bridges, bridges, inventory inventory it has not been enough to keep up 2007 to 2016 2007 to 2016 with the nation’s bridge needs. 9 9 Alabama 15,881 1,941 12.2% 16,098 1,229 7.6% In 2016, there were 55,710 struc35 42 Alaska 1,229 165 13.4% 1,488 144 9.7% turally compromised bridges, a 24.5 48 49 Arizona 7,387 187 2.5% 8,154 214 2.6% 26 22 Arkansas 12,534 1,031 8.2% 12,871 811 6.3% percent reduction compared to the 5 2 California 24,189 3,249 13.4% 25,431 1,388 5.5% 73,817 back in 2007, according to 32 31 Colorado 8,374 585 7.0% 8,682 497 5.7% ARTBA’s analysis of the U.S. 38 41 Connecticut 4,175 361 8.6% 4,214 338 8.0% 51 48 Delaware 856 21 2.5% 877 43 4.9% Department of Transportation’s 2 45 District of Columbia 245 25 10.2% 245 9 3.7% National Bridge Inventory database. 30 37 Florida 11,664 307 2.6% 12,313 256 2.1% 12 15 Georgia 14,563 1,048 7.2% 14,835 700 4.7% At current pace, it would take more 6 33 Hawaii 1,117 148 13.2% 1,132 64 5.7% than three decades to replace or repair 49 50 Idaho 4,104 359 8.7% 4,445 411 9.2% 36 18 Illinois 25,998 2,532 9.7% 26,704 2,243 8.4% all of them, according to ARTBA 18 10 Indiana 18,494 2,069 11.2% 19,245 1,533 8.0% Chief Economist Alison Premo 41 20 Iowa 24,776 5,230 21.1% 24,184 4,968 20.5% Black, who conducted the analysis. 17 8 Kansas 25,464 3,007 11.8% 25,013 2,151 8.6% 31 23 Kentucky 13,639 1,370 10.0% 14,265 1,157 8.1% A long-term infrastructure package 44 38 Louisiana 13,342 1,788 13.4% 12,915 1,739 13.5% from Congress and a permanent rev46 46 Maine 2,387 356 14.9% 2,450 352 14.4% 24 32 Maryland 5,128 396 7.7% 5,321 308 5.8% enue solution to the Highway Trust 29 27 Massachusetts 5,019 590 11.8% 5,171 483 9.3% Fund would help states make greater 15 11 Michigan 10,923 1,757 16.1% 11,156 1,234 11.1% progress on fixing the nation’s deteri14 14 Minnesota 13,067 1,158 8.9% 13,355 800 6.0% 13 6 Mississippi 17,007 3,108 18.3% 17,068 2,098 12.3% orating bridges, Black said. Federal 16 5 Missouri 24,071 4,476 18.6% 24,468 3,195 13.1% investment supports over half of all 42 40 Montana 4,982 489 9.8% 5,276 465 8.8% 45 39 Nebraska 15,475 2,396 15.5% 15,334 2,361 15.4% state highway and bridge construc8 43 Nevada 1,705 52 3.0% 1,933 31 1.6% tion programs. 22 30 New Hampshire 2,364 400 16.9% 2,486 304 12.2% 27 26 New Jersey 6,448 757 11.7% 6,730 609 9.0% The challenges will only continue 10 24 New Mexico 3,850 407 10.6% 3,973 258 6.5% to grow in the future. The average age 37 21 New York 17,361 2,161 12.4% 17,462 1,928 11.0% of a structurally deficient bridge in the 25 12 North Carolina 17,783 2,281 12.8% 18,099 1,790 9.9% 34 28 North Dakota 4,458 765 17.2% 4,400 661 15.0% U.S. is 67 years, compared to 39 11 7 Ohio 27,999 2,950 10.5% 28,284 1,942 6.9% years for non-deficient bridges. In 7 1 Oklahoma 23,528 5,928 25.2% 23,053 3,460 15.0% 28 29 Oregon 7,318 531 7.3% 8,118 429 5.3% 2007, the average age of a structurally 21 3 Pennsylvania 22,325 5,972 26.8% 22,791 4,506 19.8% deficient bridge was 60 years, com47 47 Rhode Island 748 171 22.9% 772 192 24.9% pared to 34 years for non-deficient. 19 17 South Carolina 9,221 1,297 14.1% 9,358 964 10.3% 39 34 South Dakota 5,924 1,224 20.7% 5,849 1,147 19.6% To help ensure public safety, bridge 20 16 Tennessee 19,838 1,335 6.7% 20,123 998 5.0% decks and support structures are reg4 4 Texas 50,272 2,250 4.5% 53,488 900 1.7% 3 25 Utah 2,851 244 8.6% 3,039 95 3.1% ularly inspected for deterioration and 1 13 Vermont 2,712 535 19.7% 2,766 155 5.6% remedial action. They are rated on a 23 19 Virginia 13,418 1,214 9.0% 13,892 935 6.7% 43 44 Washington 7,686 410 5.3% 8,178 392 4.8% scale of zero to nine — with nine 50 51 West Virginia 7,007 1,073 15.3% 7,217 1,247 17.3% meaning the bridge is in “excellent” 40 35 Wisconsin 13,798 1,308 9.5% 14,230 1,232 8.7% condition. A bridge is classified as 33 36 Wyoming 3,030 403 13.3% 3,128 344 11.0% structurally deficient and in need of TOTAL 597,734 73,817 12.3% 612,079 55,710 9.1% see ARTBA page 30

ARTBA's latest bridge analysis data.

change in number of structurally deficient bridges -712 -21 27 -220 -1,861 -88 -23 22 -16 -51 -348 -84 52 -289 -536 -262 -856 -213 -49 -4 -88 -107 -523 -358 -1,010 -1,281 -24 -35 -21 -96 -148 -149 -233 -491 -104 -1,008 -2,468 -102 -1,466 21 -333 -77 -337 -1,350 -149 -380 -279 -18 174 -76 -59 -18,107

% change in structurally deficient bridges 2007-2016 -36.7% -12.7% 14.4% -21.3% -57.3% -15.0% -6.4% 104.8% -64.0% -16.6% -33.2% -56.8% 14.5% -11.4% -25.9% -5.0% -28.5% -15.5% -2.7% -1.1% -22.2% -18.1% -29.8% -30.9% -32.5% -28.6% -4.9% -1.5% -40.4% -24.0% -19.6% -36.6% -10.8% -21.5% -13.6% -34.2% -41.6% -19.2% -24.5% 12.3% -25.7% -6.3% -25.2% -60.0% -61.1% -71.0% -23.0% -4.4% 16.2% -5.8% -14.6% -24.5%

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 9

APA PACIT Y AN NT N TAGE

UP TO

47 %* *

Compared to GMK5150 competition

adius with maximum counterweight

NEW W GMK5150 and GMK5150L

AN NYWHERE. The h strength e h and d mobility bili to handle h dl more jobs. j s. The new w GMK5150 and GMK5150L 150L deliver great ROI due to outstand ding lifting capacitiess and greater jobsite j accessibility.

liftting capacities in oun nterweight configurations GMK5150L High-per -performing boom capable of lifting g 11,6 t with 60 m boom — ideal forr tower crane rigging GMK5150 with 51 m boom

•150 t maximum capacity •Narrow w 2, 2 75 m width on 445/95R25 /95R25 tires •Fuel-effi fficient single -engine d design

Compact p dimensions sions with reduced overall length ength and width

Impressiive lifting, jobsite man neuverability and fuell efficiency help you u achiev hi e greater profi fits. fi

Crane Control System y (CCS) with Boom Configurator ator enhances operator controll and efficiency

Contact your local Grove dealler, or go to www.manitowoccranes.com i m to learn more.

Easy operator access ccess on the crane for secure, fast riigging; especially when working att heights

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

H&E Equipment Services

www.kirby-smith.com

www.wpcrane.com

HE-equipment.com

Oklahoma City, OK 800-375-3339 Tulsa, OK 800-375-3733 Kansas City, KS 877-851-5729 St. Louis, MO 866-279-1392

6720 Arctic Blvd. 8600 Calabash Ave. 19602 60th Avenue NE Anchorage, AK 99518 Arlington, WA 98223 Fontana, CA 92335 855-342-7263 253-254-7950 562-286-6618 3521 Alken Street Fax: 909-356-1340 91-210 Kalaeloa Blvd. Bakersfield, CA 93308 Kapolei, HI 96707 275 W. Larch Road 855-927-2637 808-682-7263 Tracy, CA 95304 209-597-3824

Belgrade, MT 406-388-2308 Billings, MT 406-259-9720 Boise, ID 208-388-3323 Salt Lake City, UT 801-974-0388

St. George, UT 435-674-2994 Las Vegas, NV 702-320-6500 Phoenix, AZ 602-232-0600 Tucson, AZ 520-770-1120

Albuquerque, NM 505-764-8100 Dallas, TX 972-986-0910 Houston, TX 713-433-6411

Page 10 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 11

BANE MACHINERY, INC. 2449 Manana Rd. Dallas, TX 75220 214/352-2468 Fax: 214/353-2460 Tyler, TX 903-597-6641 Ft. Worth, TX 817/847-5894 www.banemachinery.com

BEE EQUIPMENT SALES LTD. 2506 Slaton Highway Lubbock, TX 79404 806/745-1511 Fax: 806/455-0543 www.beeequipmentsales.com

C. L. BOYD CO., INC. 4220 West Reno Ave. Oklahoma City, OK 73107 800/OKC-BOYD 405/942-8000 Fax: 405/945-8569 Ardmore, OK 866/720-2693 580/224-2693 Lawton, OK 800/633-2693 580/355-6667 www.clboyd.com

SCOTT EQUIPMENT 14635 Valley Blvd. Fontana, CA 92335 800/316-0327 Fax: 909/822-4850 www.scottequip.com

Page 12 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cashman, Kiewit Enhance Safety With Cat Detect System By Kate Gallagher CASHMAN EQUIPMENT MARKETING COMMUNICATOR

How much is your safety worth to you? How much is the safety of your coworkers worth to you? Your employees? Fortunately, the answer in this day and age is typically, “Priceless.” The wearable technology industry has been placing a price on it, however. Every single day, companies are coming out with new wearable technology that enhances the personal safety of the individual. Just as often, other companies are purchasing that technology to help keep people safe on the job. According to the Occupational Safety and Health Administration (OSHA), “struck-by For companies like Kiewit, a 133-year-old construction, mining and engineering organization, safety objects” is a leading cause is of the utmost importance. of construction-related deaths and is consistently on the job site.” Cooper, Cashman Equipment ble, but audible “tape.” This RFID one of OSHA’s Jones works for the international product support sales representa- proximity detection technology “Construction Fatal Four” Kiewit Corporation in its Las tive, had heard about various tech- provides a real-time warning to every year. Approximately Vegas, Nev., location, which is cur- nologies but wanted to present ground workers who have “ducked 75 percent of struck-by rently the design-build team for Jones with in-depth knowledge so under” that invisible tape and fatalities involve heavy Project NEON, the largest public he sought out Cashman Equipment’s entered the dangerous work zone. equipment such as trucks works project in Nevada history. In condition monitoring analyst. The machine operator and the or cranes. partnership with Nevada “I look at equipment informaground person are then both alerted can stick the RFID stickers inside The desire to prevent “You Department of Transportation tion all day,” the analyst said. that someone has entered an area a hard hat in seconds,” said Kevin such incidents has collided Jones, Kiewit equipment superintend- (NDOT), the Federal Highway “Systems like VisionLink provide that may be in a fixed blind spot with wearable technology ent in Las Vegas. Administration (FHWA) and the electronic data, site conditions, and pose a hazard. advancements. The field city of Las Vegas, Kiewit will inspection information…all the “Safety awareness on the job of wearable technology has grown site. design and build 3.7 mi. of things that let a customer like site has gone up just by installing Cat Detect for Personnel uses Interstate 15 (I-15) between Sahara Kiewit make proactive decisions Cat Detect RFID tags on the hard from its obscure origins in hearing aids and calculator watches to its Radio Frequency Identification Avenue and the “Spaghetti Bowl” about their machine in order to hats,” Cooper stated. more recognizable explosion into (RFID) technology to detect interchange in downtown Las increase machine uptime. Although this specific installathe health and fitness monitoring ground workers in an unsafe area, Vegas. It’s currently the busiest Technology like Cat Detect pro- tion of Cat Detect was the first in area. An obvious offshoot has been typically behind the equipment. stretch of highway in Nevada with vides them with even more data on the state of Nevada, Kiewit recentinto the area of personal safety at RFID tags can easily be placed 300,000 vehicles daily, or one- machine operation, but in the ly purchased five more Cat Detect within personal protective equip- tenth of the state population, seeing realm of hazards.” work. for Personnel kits to be installed on For companies like Kiewit, a ment (PPE), which then communi- 25,000 lane changes an hour. By having a safety fault code in machines working at the Project 133-year-old construction, mining cates with an antenna on the Traffic through the corridor is the system from Cat Detect, Kiewit NEON job site. Kiewit’s Reno and engineering organization, safe- machine. expected to double by 2035. can review the jobsite areas that office also ordered a new 966M If an operator reverses a piece of ty is of the utmost importance. While designing and construct- frequently trigger an alarm or work wheel loader for a Lake Tahoe With a safety motto of Nobody equipment installed with an anten- ing express lanes, exchanges, inter- with employees who are unaware project with Cat Detect for Gets Hurt, the North American- na, they will be alerted inside the changes, flyways and extensions of a particular hazard zone. Cat Personnel on it. The safety of its based company is constantly look- cab with a visual and audible alarm of the I-15 and U.S. 95 highways, Detect lets a customer take correc- employees is such a high priority ing for ways to ensure that there when a ground worker is behind Jones’ office is responsible for 20 tive action before an accident for Kiewit, the company put the are no incidents and no injuries, no them. The loud audible alarm out- different work zones where up to occurs. system on its discussion agenda at side of the cab also alerts the 400 employees work. matter how seemingly minor. “Our goal is to be proactive in its national safety summit in On a busy job site, Kiewit is ground worker of their interference The size of Kiewit and its eliminating hazards” said Jones. Denver and will be evaluating constantly concerned about poten- of the detection zone behind the record-breaking, industry-respect- “Our safety culture isn’t based on a making Cat Detect for Personnel a tial safety incidents involving equipment. ed interest in safety means its regulatory agency — it’s based on requirement for any new equip“You can stick the RFID stickers organization was ideal for the Cat wanting to keep our people safe.” ment. moving heavy equipment. With equipment like the 56-ton Cat inside a hard hat in seconds,” said Detect for Personnel technology. By installing Cat Detect for For more information, visit 966K wheel loader operating at Kevin Jones, Kiewit equipment When Jones was talking to his rep- Personnel, Kiewit has effectively www.cashmanequipment.com. speeds up to 25 mi. per hour, the superintendent in Las Vegas. “The resentative from Cashman created a convenient, trans(This story also can be found potential for a serious injury is high hardware for a machine takes a Equipment, Nevada’s Caterpillar portable, dynamic “dangerous on Construction Equipment if operators are unaware of few hours. It’s something very dealership, he asked about any rel- work zone.” Think red-taped Guide’s website at www.conemployees’ locations on the job easy to do that fights complacency evant safety technology. Roy perimeter demarcated with invisi- structionequipmentguide.com.)

SECTION

Attachments Pages 13-16

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

John Deere High-Capacity Buckets Make Big Impact Designed to take advantage of the improved performance capabilities and boom design of the GSeries skid steers and compact track loaders (CTLs), John Deere now offers a 90-in. (228 cm) light material high-capacity bucket (LM90) as part of the ever-expanding lineup of Worksite Pro attachments. It features a high back for maximum capacity to cut through piles of snow, mulch or other light materials in large quantities, significantly reducing cycle times versus smaller size buckets, according to the manufacturer. “Customer feedback to the new G-Series machines has been extremely positive because they

are powerful and highly productive,” said Gregg Zupancic, product marketing manager, John Deere Construction & Forestry. “When equipped with a light material high-capacity bucket, that productivity is magnified, making these machines capable of working just as hard as a larger piece of construction equipment.” The new 90-in. light material bucket has a heaped capacity of 54 cu. ft. (1.5 cu m) and can carry more material per load than previous John Deere offerings. The increased width and high-back design reduces spillage and provides industry-leading capacity. An integrated step on the back of the

bucket also is included for easy entry and exit from the machine. With the universal, self-cleaning Quik-Tatch easy attachment system found on all John Deere skid steers, CTLs and compact excavators, the machine can easily add and remove the light material highcapacity bucket in seconds. The new attachment series also is backed by John Deere parts, service and warranty coverage. For more information, visit www.johndeere.com. John Deere now offers a 90-in. (228 cm) light material highcapacity bucket (LM90). It features a high back for maximum capacity to cut through piles of snow, mulch or other light materials in large quantities.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

ARDCO AMT 600 Easily Attaches to Truck With Hitch Mount Designed for safe and efficient handling of pipe, ARDCO’s AMT pipe trailer attachment for the articulating multi-purpose truck (AMT) offers adjustable lengths and increased load capacity, making it ideal for off-road transport in pipeline or utility construction applications. Built specifically for the ARDCO AMT 600, the pipe trailer easily attaches to the truck using a supplied hitch mount with conventional fifth wheel connection. The trailer features a flexible-load rear frame with 45-degree swivel capabilities, trailer axles with available braking system, and var-

ious tire options. To protect against damage to pipes or other products, the load surface is constructed of oak timbers and the side pole surface is Teflon-coated. The trailer offers a load capacity of 50,000 lbs. (22,680 kg). Trailer length can be adjusted from a maximum of 35 ft. 8 in. (10.8 m) to a minimum of 22 ft. 2 in. (6.7 m) The pipe trailer is one of many ARDCO attachments compatible with the modular back-end platform of the AMT 600. The AMT 600 is powered by a 250-hp Cummins QSB6.7

Built specifically for the ARDCO AMT 600, the pipe trailer easily attaches to the truck using a supplied hitch mount with conventional fifth wheel connection. The trailer features a flexible-load rear frame with 45-degree swivel capabilities, trailer axles with available braking system, and various tire options.

Tier IV Final diesel engine, features selectable 4- or 6-wheeldrive, and has a top travel speed of 25 miles per hour. The AMT 600 has a 2-person, fully enclosed, all-weather ROPS cab that is sound rated to 68 dB. A 7-in. display in the steering column provides digital gauges with onboard diagnostics, digital manual access and an optional backup camera display. A streamlined front-end angle offers the driver panoramic visibility to enhance safety. Specifically built for off-road travel, the AMT 600 includes a high-strength center pivot trunnion with approximately 20 degrees of oscillation, which allows all the tires to maintain ground contact and traction while travelling over rough terrain. Dual hydraulic cylinders provide 37 degrees of steering each way, and articulating motion allows the tires to slide left or right in wet/muddy terrain to gain traction, according to the manufacturer. The AMT 600 includes a Dana 6-speed powershift transmission with twist grip shifter and AxleTech rigid planetary axles with driver controlled differential lock. Optional accessories include a hydraulically operated front push blade, front-mounted hydraulic winch, heavyduty front bumper/brush guard, and auxiliary hydraulics. The AMT 600 is covered by a limited one-year warranty. For more information, call 800/332-7326 or visit www.ardcomfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 14 • August 20, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

TRANSF F RMER. TM

THE NEW WA WA AY Y TO P PR CESS M MA ATERIAL TERIAL.

AY OU O

LU Group Inc. (800) 939-2558 usa@allu.net

Bandit Expands Skid-Steer Loader Attachment Lineup Bandit Industries Inc. has expanded its line of skid steer loader attachments to include the Model SA-25, a hydraulically powered stump grinder attachment that operates off a loader’s existing high flow hydraulic systems. The SA-25 features a 24.5 in. (62 cm) diameter revolution cutterwheel, the same size cutterwheel found on some of Bandit’s largest self-propelled stump grinders. The Model SA-25 joins Bandit’s lineup of skid steer loader attachments that includes the Bandit stump gun vertical stump grinder and the Model 60FM and Model 72FM forestry mulchers. All Bandit attachments bring the power and productivity of a Bandit to the versatility of a skid-steer loader.

“Adding a Model SA-25 or stump gun stump grinder makes quick work of stump removals in land clearing, rightof-way or construction jobs.” Jason Morey Bandit

“Skid steer loaders are already on the job all over the world,” said Bandit Sales Manager Jason Morey. “Adding a Model SA-25 or stump gun stump grinder makes quick work of stump removals in land clearing, right-of-way or construction jobs. And a Model 60FM or 72FM can turn your skid-steer loader into your most productive mulching machine.” For more information, call 800/952-0178 or visit www.banditchippers.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The SA-25 features a 24.5 in. (62 cm) diameter revolution cutterwheel, the same size cutterwheel found on some of Bandit’s largest self-propelled stump grinders.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • August 20, 2017 • Page 15

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Page 16 • August 20, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Following Debut, Vacuworx Renames Attachment as SL 2

Vacuworx’s SS 2, which debuted in February 2016, has a new name — the SL 2 subcompact vacuum lifting system.

Vacuworx’s SS 2, which debuted in February 2016, has a new name —the SL 2 subcompact vacuum lifting system. This new name is a small change, but the company feels it is best for positioning the product as it continues to gain interest around the world and is being utilized with more diverse host machines. The “ultimate skid steer attachment” was originally developed to meet the needs of a specific road plate application. Since being introduced at World of Concrete, the integrated system has met with widespread interest and enthusiasm in various industries. It was the first product introduced in the growing lineup of compact equipment attachments from Vacuworx. For concrete construction and demolition contractors in particular, the SL 2 is changing the game, offering a solution to common jobsite restrictions such as loud noise, debris and vibration. The vacuum lifting system also has proven effective for work inside buildings, tunnels and mines, according to the manufacturer. The original nomenclature, while synonymous with speed and performance in the United States, could potentially meet with resistance as the company expands its efforts in the European market. According to Vacuworx President and CEO Bill Solomon, “We feel it is prudent to change the name at this early stage in the product life. The performance of the SL 2 is exactly the same [as the SS 2], and for now no alterations have been made to the product itself.”

The Contractor’s MVP Lightweight and versatile, the SL 2 features all-aluminum construction. Weighing just 98 lb. (44 kg) without mounting plate, the vacuum lifting system has a lifting capacity up to 2,700 lb. (1,224 kg). The design features quick-connect hydraulic hoses and a factory pre-set flow control valve to ensure optimal performance. There are two mounting assembly options depending on the host machine: mini/walk behind subcompact equipment or standard skid steer-type machines. The SL 2 also is compatible with small excavators, backhoes and cranes using the clevis hook connection. The SL 2 operates using the auxiliary hydraulics from the host machine (minimum 10 gpm required with maximum 3,000 psi). The vacuum pump maintains a constant vacuum in the pressure reservoir. When activated, the system pulls a vacuum between the integrated 24 by 24 in. (61 by 61 cm) vacuum pad and the object to be lifted, providing a powerful positive seal. Vacuworx Tough Seal pad seal is used on the vacuum pad to cover the material to be lifted and create the necessary suction. The vacuum seal holds until the operator activates the release, even in the event of a power failure, according to the manufacturer. For more information, visit vacuworx.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 17

Mega Machinery Co. 12215 Highway 67 Lakeside, CA 92040 (888) 883-7618 www.megamachineryco.com

Prime Equip Solutions 505 Rankin Road Houston, TX 77073 (281) 443-7667 www.primeequipsolutions.com

Page 18 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OTC: Bridges Improving, Withstanding Earthquakes; Awards $19M in Contracts Oklahoma Department of Transportation photo

KOMATSU EQUIPMENT COMPANY www.komatsueq.com 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

1409 East 3850 South St. George, UT 84790 435-986-1000

3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334

10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

At its Aug. 7 meeting, the Oklahoma Transportation Commission heard that a recent industry report noted Oklahoma has eliminated the most structurally deficient bridges in the nation since 2007. Additional financial resources in the last decade have allowed the Oklahoma Department of Transportation to address scores of structurally deficient bridges, including replacing outdated SH-18 truss bridge over the Arkansas River between Pawnee and Osage counties with a modern structure.

Highlights of the Oklahoma Transportation Commission’s Aug. 7 meeting include a presentation on the Oklahoma Department of Transportation’s new system for inspecting bridges after earthquakes, an update on improving bridge conditions and approval of contracts to replace a U.S.-412/U.S.-64 bridge near Keystone Dam in Tulsa County and rehabilitate bridges on SH-117 in Creek County and U.S.-69 in McIntosh County. Commissioners heard a detailed presentation on ODOT’s implementation of ShakeCast, a software program that uses state bridge and seismic data to help crews perform bridge inspections quickly and efficiently after earthquakes. Previously, ODOT crews were

checking all bridges within a pre-determined radius of an earthquake’s epicenter. Now after an earthquake, ShakeCast will automatically generate a priority order for bridge inspections based on several factors including bridge condition, age and proximity to an earthquake’s epicenter, seismic movement data and magnitude rating. Engineers with ODOT have noted that Oklahoma’s bridge infrastructure has withstood the increased number and severity of earthquakes in the last several years. Cosmetic damage was found after the 5.8-magnitude Pawnee quake in September 2016 and minor damage to U.S.-62 pavement occurred during a 5.6-magnitude earthquake near Prague in 2011.

Mike Patterson, Secretary of Transportation and ODOT executive director, also was encouraged by a recent report from the American Road and Transportation Builders Association that showed Oklahoma leading the nation in eliminating structurally deficient bridges. According to federal data cited by ARTBA, Oklahoma has addressed 2,458 structurally deficient highway and local bridges in the last decade, with California second at 1,861 bridges. The report coincides with the 10th anniversary of the collapse of the I-35 West bridge in Minneapolis, Minn., which called the nation’s attention to the structurally deficient bridge problem. see OTC page 32

www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681 Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 800-989-7121 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540

ROAD MACHINERY

ShakeCast Software Refines Bridge Inspection State bridge inspectors will be able to provide a faster, more targeted response in ensuring public safety the next time an earthquake rolls across Oklahoma. The Oklahoma Department of Transportation is now implementing the use of ShakeCast, a program created by the U.S. Geological Survey. ShakeCast is in the final stage of a twoyear, two-phase, nearly $650,000 contract with Infrastructure Engineers Inc. of Edmond, Okla., to assist the department in developing an earthquake response protocol. Formalizing the plan, providing final training and an additional four years of system maintenance will conclude the contract. The ShakeCast program will enable the nearly 300 trained ODOT employees to quickly determine which bridges to inspect first after an earthquake. If conditions warrant, key

ODOT employees will receive a software-generated inspection priority order based on several factors including ODOT bridge data such as bridge condition, age and proximity to an earthquake’s epicenter, combined with USGS seismic movement data and magnitude rating. Previously ODOT visually inspected all bridges within 5 mi. of any earthquake epicenter between 4.4 to 4.7 magnitude. The inspection radius increased with the earthquake magnitudes. Generally, with a 4- to 5-magnitude earthquake no damage has been found. Going forward with ShakeCast, the inspections will identify only specific bridges susceptible to damage, allowing for a faster and more pinpointed response. “This technology is one of the biggest advances in ensuring see SOFTWARE page 32

www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383

KOMATSU SOUTHWEST 4520 National Park Hwy Carlsbad, NM 88220 575-628-8301 901 Troy King Road Farmington, NM 87401 505-324-8601 1181 Burgundy Drive El Paso, TX 79907 915-872-1001

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 19

KIRBY-SMITH MACHINERY INC. www.kirby-smith.com 6715 W Reno Avenue Oklahoma City, OK 73137 800-375-3339 405-495-7820 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000

POWER MOTIVE CORPORATION www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Durango, CO 970-259-0455 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188 Cheyenne, WY 307-634-5149

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 S. Main Street Houston, TX 77035 713-723-1050 Buffalo, TX 903-322-7150 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 Kilgore, TX 903-984-2011 Pflugerville, TX 512-251-0013 Port Arthur, TX 409-721-5305 San Antonio, TX 210-648-4444 Tomball, TX 281-351-9016

Page 20 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WEDNESDAY, OCTOBER 18, 2017 23rd Annual

Lunch Served from 12:00pm - 1:30pm Center of Progress Building • NY State Fairgrounds, Syracuse, NY Lunch Sponsored By:

Stadium International Trucks • Trux Outfitters • Tracey Road Equipment

Dozens of Door Prizes from Exhibitors WIN TWO GRAND PRIZES FIRST PRIZE

SECOND PRIZE

(2) Grandstand Tickets to NASCAR Watkins Glen Race in August 2018, including (2) Pit Road Passes.

A Pair of Tickets to a Buffalo Bills vs. Miami Dolphins Football Game on Sunday, Dec. 17th, 2017 in the Jim Kelly Club.

Free Registration www.superintendentsprofile.com/attendee-registration.php

Call for Exhibit Space Today! Contact: Bob Buckley 800-992-7116 or E-Mail: bbuckley@cegltd.com

Produced by

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 21

Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.

DELIVERING SUCCESS TOGETHER

Contact our distributors and find out how we can help improve your bottom line.

BIGGE CRANE AND RIGGING

SCOTT-MACON EQUIPMENT

RT-T-HC-CC-AT-BT-T www.bigge.com

RT-T-HC/CC-AT-BT www.smequipment.com

San Leandro, CA 888-337-2444 510-638-8100

14925 South Main Street Houston, TX 77035 713-721-7070 Fax: 714-721-0422

San Jose, CA 408-452-1537 La Mirada, CA 714-670-9525 Missoula, MT 888-337-2444 Houston, TX 713-434-0995 Auburn, WA 206-443-8500 Richmond, VA 804-271-9356

Dallas, TX 214-391-4000 Corpus Christi, TX 361-289-2782 Houma, LA 985-851-1118 Baton Rouge, LA 225-753-4111 Lake Charles, LA 337-882-0197 Tulsa, OK 918-224-2000

Authorized Terex Cranes Distributors © Terex Cranes 2017

•

Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.

For Your Local Terex Dealer Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

Page 22 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hawaii Will Receive $266M in Federal Funding for Various Military Projects HAWAII from page 1

“Our effort to secure more than $266 million in funding for Hawaii is well on its way,” said Schatz, lead Democrat on the Senate Appropriations Subcommittee on Military Construction and Veterans Affairs. “I know how critical this funding is to Hawaii, to the success of our military, and to our national security, which is why I’m glad to see this bill clear this hurdle. I’m also pleased that this bill takes care of our veterans in Hawaii, showing that we can build for the future while also honoring those who made it possible. I look forward to seeing this bill pass the Senate and be signed into law soon.” Funding for Hawaii military construction projects in this bill is approximately $53 million over the enacted FY2017 bill. The bill provides $258.6 million to fully fund all of Hawaii’s military construction projects in the president’s budget. This includes: • $90 million for the Army’s Command and Control Facility at Fort Shafter; • $73.2 million for a sewer lift station and relief sewer line at Joint Base Pearl Harbor-Hickam; • $19.012 million for new MV-22 landing pads at Marine Corps Base Kaneohe Bay; • $65.864 million for a Communication/Crypto facility in Wahiawa; • $5.5 million for a consolidated training facility for the Air Force Reserve at Joint Base Pearl Harbor-Hickam; and • $5 million for the NSA facility at Kunia for improvements to its tunnel entrance. The bill also funds two Energy Resilience and Conservation Investment Program projects to improve ener-

gy security and water conservation at military installations in Hawaii. These projects include: • $6.2 million for HVAC upgrades at Kaneohe Bay; and • $1.4 million for salt water pumping system for the Navy at JBPHH. The legislation also includes a requirement that the Navy develop an investment strategy to improve each of the public shipyards, including Pearl Harbor Naval Shipyard which the Navy has identified has an urgent requirement to extend Dry Dock 3 so that it can maintain fleet readiness in the Pacific. In addition to military construction, the bill provides $78.4 billion to the Department of Veterans Affairs (VA), $4 billion more than what was enacted in fiscal year 2017. In particular, the bill includes: • $110 million to fund VA’s grants for the construction of state extended care facilities, which will make progress toward funding a new 120-bed facility in Honolulu; • an additional $20 million for women veterans’ care, which will help ensure that the more than 13,000 women veterans in Hawaii have access to care; and • a mandate for the VA to develop a better construction plan to replace a Hilo community-based outpatient clinic, which has to be closed because it is in a tsunami risk zone. This bill will now be reported to the full Senate for consideration. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Entrepreneur’s Global 200 List Ranks PIRTEK as Preeminent World Franchise PIRTEK USA, a leader in fluid transfer solutions, is the 65th most highly rated franchise in the world, according to a recent ranking by Entrepreneur magazine. Year after year, PIRTEK has been advancing steadily up the Entrepreneur rankings. In January, the publication announced that PIRTEK had moved up 64 places to the No. 173 spot in its Franchise 500 list. In only two years, the company has soared 249 places. The newly announced rank of 65 is part of Entrepreneur’s most recent Global 200 list. To arrive at the global ranking, the publication takes the Franchise 500 companies and factors in international size and growth, costs and fees, franchise support, stability

and other variables. “We’ve been ascending the rankings very quickly, thanks to the commitment and success of the business owners and team members,” said Glenn Duncan, executive director of PIRTEK USA. “It speaks well of our business model, and our efforts to open franchises that receive excellent training and corporate support. The new ranking also reflects the strong growth mode we’ve been in for the past year, which we plan to continue.” One of the initiatives responsible for PIRTEK’s recent growth is its Tier 2 franchise model, a mobile-only option. Under Tier 2, a franchisee can lease two vehicles and keep the inventory in a storage facility or warehouse. This allows the owner to start up a

PIRTEK location at a much lower point of entry. Tier 2 owners typically grow their franchises to Tier 1 Service Center locations within three years. The only franchise of its kind in the United States, PIRTEK provides hydraulic and industrial hose replacement sales and services. There are 70 PIRTEK franchises and a fleet of mobile service vehicles throughout the United States. Globally, PIRTEK has more than 400 locations and 2,000 mobile service vehicles in 23 countries. For more information, visit pirtekusa.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

ALABAMA COLORADO WAGNER EQUIPMENT CO. THOMPSON www.wagnerequipment.com Aurora TRACTOR 303-739-3000 Denver www.thompsontractor.com 303-433-2727 (Rental) Auburn Carbondale 970-963-7368 (Rental) 334-321-2030 Commerce City Birmingham 303-286-2300 (Rental) Colorado Springs 205-326-0334 719-390-7316 (Rental) Dothan719-635-1669 Granby 334-673-3300 970-328-2080 (Rental) HuntsvilleGypsum 970-328-2080 (Rental) 256-532-3001 Hayden Mobile970-276-3781 Silverthorne 251-452-1180 970-262-3788 (Rental) Fort Collins Montgomery 970-493-5005 (Rental) 334-262-1101 Grand Junction 970-245-6546 (Rental) Oxford/Anniston 970-242-2834 Pueblo 256-835-5737 719-544-0088 (Rental) Shelby 719-544-4433 County Steamboat Springs 205-649-9489 970-871-1990 (Rental) Tuscaloosa Windsor 970-278-1750 (Rental) 205-247-3402

Burlington 719-346-7880 (Rental) (719) 346-5132 NORTH Durango CAROLINA 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750

Fayetteville NEW MEXICO WAGNER EQUIPMENT CO. 910-424-1200 www.wagnerequipment.com Greenville Flora Vista 505-334-5522 (Rental) 252-758-4403 La Cruces New Bern 575-647-9700 Albuquerque 252-638-5838 505-938-2000 (Rental) Raleigh505-345-8411 Hobbs 919-772-2121 575-393-2148 (Rental) Wilmington 575-393-3665 Clovis 910-675-9211 505-235-3294 (Rental) Farmington 505-327-5331

SOUTH CAROLINA TEXAS

MAY HEAVY ANDERSON MACHINERY CO. www.andersonmachinerytexas.com EQUIPMENT Corpus Christi • 361-289-6043 Manor • 512-272-8133 RENTAL & SALES Pharr • 956-781-5995 www.mayequip.com San Antonio • 210-661-2366 Victoria • 361-575-8111 Columbia GEORGE P. BANE, INC. (888) 865-1002 www.banemachinery.com Tyler • 903-597-6641

VIRGINIA WAGNER EQUIPMENT CO. www.wagnerequipment.com JAMES El RIVER Paso 915-493-5005 (Rental) EQUIPMENT 915-821-7651

www.jamesriverequipment.com WASHINGTON

Ashland N CAg MACHINERY www.ncmachinery.com 804-358-6776 800-562-4735 Fisherville Seattle • 425-251-5800 www.jamesriverequipment.com Chehalis • 360-748-8845 540-337-3057 NORTH DAKOTA Fife • 253-896-0878 Asheville TRACTOR AND EQUIPMENT Winchester Monroe • 360-805-6000 Williston • 701-572-8377 Mt. Vernon • 360-424-4292 828-667-0176 540-667-9777 Wenatchee • 509-886-5561

JAMES RIVER EQUIPMENT

CharlotteNEVADA CASHMAN EQUIPMENT 704-597-0211 www.cashmanequipment.com 3300 St. Rose Parkway Wilkesboro Henderson, NV 89052 336-973-8201 702-649-8777 Fax: 702-633-4699 Ahoskie Elko • 775-738-9871 252-332-5550 Reno/Sparks • 775-358-5111

Yakima • 509-248-2371 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pasco • 509-547-9541 Spokane • 509-535-1744

Made in the U.S.A. Since 1949

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 23

MISSISSIPPI

SOUTH CAROLINA

PUCKETT RENTS

MAY HEAVY-

www.puckettrents.com EQUIPMENT Richland RENTAL & SALES ALASKA 601-939-5151 www.mayequip.com NC MACHINERY www.ncmachinery.com Biloxi Columbia 800-478-7000 228-392-2211 Anchorage, AK •866-629-3784 907-786-7500 • 907-581-1367 Hattiesburg Dutch Harbor, AKCharleston Fairbanks, AK • 907-452-7251 601-264-1111 866-629-3784 Juneau, AK • 907-789-0181 Meridian Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400 VIRGINIA 601-703-0116 COASTAL Madison CALIFORNIA EQUIPMENT CORP. HOLT OF CALIFORNIA 601-859-5131 www.holtca.com www.coastalequipment.net Pleasant Grove • 916-921-8969 Virginia Beach NORTH CAROLINA IDAHO 757-424-1900 JAMES RIVER WESTERNYorktown STATES EQUIPMENT EQUIPMENT COMPANY 757-898-1900 www.jamesriverequipment.com www.westernstatescat.com Hayden • 208-762-6690 Asheville Idaho Falls • 208-552-2287 JAMES RIVER 828-667-0176 Lewiston • 208-746-3301 EQUIPMENT Meridian • 208-888-2287 Charlotte Pocatello • 208-232-2640 www.jamesriverequipment.com 704-597-0211 Twin Falls • 208-734-7330 Ashland Ag Wilkesboro 804-358-6776 MONTANA 336-973-8201 TRACTOR ANDFishersville EQUIPMENT Ahoskie Billings, MT • 406-656-0202 540-337-3057 252-332-5550 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Winchester Fayetteville Great Falls • 406-761-7900 540-667-9777 910-424-1200 Helena • 406-442-2990 Greenville WESTERN STATES 252-758-4403 EQUIPMENT COMPANY New Bern www.westernstatescat.com Kalispell • 406-752-3030 252-638-5838 Missoula • 406-721-4050 Raleigh OKLAHOMA 919-772-2121 OCT EQUIPMENT Wilmington www.octequipment.com 910-675-9211 Clinton • 580-323-3422 Oklahoma City • 405-789-6812 Tulsa • 918-437-5085

OREGON WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pendleton • 541-276-5812

WYOMING TRACTOR AND EQUIPMENT Worland • 307-347-4747

Page 24 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 25

APCO Equipment Corporation 3432 North Fifth Street North Las Vegas, NV 89032 702-871-7474 www.apcoequipment.com

Cisco Equipment 1706 S. 1st St. Artesia, NM 88210 800-748-1846 2707 Slaton Hwy. Lubbock, TX 79404 877-745-9595 520 SE Loop 338 Odessa, TX 800-657-3673 620 N. Bell St. San Angelo, TX 76903 800-496-0271 www.cisco-equipment.com

Bane Machinery 2449 Manana Road Dallas, TX 75220 Toll Free 800-594-BANE (2263) 10505 North Freeway Fort Worth, TX 76177 Toll Free 800-601-BANE (2263) 3402 E. Northeast Loop 323 Tyler, TX 75708 Toll Free 800-594-2200 www.banemachinery.com

Oklahoma Territory Construction Equipment 3839 West Reno Ave. Oklahoma City, OK 73107 405-917-9191 866-339-6827 2520 E King Street Tulsa, OK 74110 918-835-7200 866-334-6827 www.oklahomaterritoryequipment.com

B-C Equipment Sales Inc. 809 Corn Product Rd. Corpus Christi, TX 78409 361-289-9314 201 E. EXPWY 83 La Feria, Texas 78559 956-797-0072 1620 S.E. Loop 410 San Antonio, TX 78220 210-447-9314

Triad Machinery 1601 E. Bay Street Tacoma, WA 98421 253-722-5600

www.bcequipment.com 910 N. Thierman Road Spokane Valley, WA 99212 509-534-1900 4440 SW Airport Road Prineville, OR 97754 888-662-2940 91251 Coburg Industrial Way Coburg, OR 97408-9469 541-342-7700 18200 NE Riverside Parkway Portland, OR 97230-4311 800-221-8512 www.triadmachinery.com

Page 26 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Montana Reconstructs U.S. 212 From Rockvale to Laurel Montana Department of Transportation photo

Montana Department of Transportation photo

Crews will construct a two-lane roadway, with intermittent four-lane segments between RP 42.5 and RP 52.5. MONTANA from page 1

railroad underpass, and full reconstruction of the existing substandard two-lane roadway alignment at the northern end of the project corridor. The second phase project included intersection and roadway improvements for the intersection of U.S. 212 and U.S. 310 in Rockvale. The third-phase extends the highway from the railroad overpass to Rockvale. The new highway alignment will be on higher ground, west of the existing highway. “The new alignment was necessary due to the many homes, approaches, railroad and environmental impacts along the existing highway,” said Lori Ryan, public information officer of Montana Department of Transportation. “The intent of the project is

Workers also will construct the earthwork and drainage features for the ultimate roadway template of a four-lane divided roadway with a depressed median.

to provide a highway with increased capacity and built to today’s design standards. Ryan added that the old highway will remain open during and after construction. Nelcon Inc. is contractor for the thirdphase reconstruction work. Nelcon also was contractor for the second-phase U.S. 212 and U.S. 310 intersection work that included asphalt paving, pipe and dirt work. For Phase 3, Nelcon Inc. and its subcontractors have initially focused on grading, culvert installation, irrigation and fence construction. Subcontractors include Poteet Construction of Missoula, Mont.; Triptych Construction of Glide, Ore.; Fusion Technologies of Billings; Pavement Maintenance Solutions of Columbia Falls, Mont.; Kootenai Surveyors of Libby, Mont.;

The project that began in November 2016 and is expected to finish in August 2018, includes construction of a new road alignment.

JCT Construction of Ballantine, Mont. and Highmark Traffic Services of Billings. About 16 workers are on the job each day including six MDT inspectors and supervisors, and 15 workers employed by the prime contractor. Materials and Equipment Crews will apply a total of about 102,540 tons of plant mix concrete. The project requires excavation of 2.12million cu. yds. of dirt and includes installation of about 28,000 ft. of various types and sizes of pipe and culvert for drainage. Equipment at the construction site includes four scrappers, excavators, loaders, motorgraders, rock trucks, rollers, water trucks and bulldozers.

Irrigation System Challenges Crews A vast amount of irrigation work is part of the highway reconstruction project. It includes 25 irrigation structures and more than 11,000 ft. of irrigation pipe. Irrigation work must be done during the off-season between November and April, when much of the water is in the form of ice and snow. But heavy snow and frozen ground can be a challenge for construction crews. The justconcluded winter season was a tough one for irrigation work. It included deep snow and extreme-low temperatures that made it difficult to install irrigation systems. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Officials Discuss Manufacturing Jobs in Oklahoma JOBS from page 7

John Garrison, CEO and president of Terex, echoed these sentiments. “Oklahoma City has really been the beneficiary of our focusing efforts. We’re focusing our portfolio. We’re growing our business here. It’s a very important facility to Terex.” Regarding the event, Garrison applauded the Oklahoma City team members: “Hats off to the OKC team. The congressman said, “this team has got a lot of spirit. You can tell they’re engaged in the work they’re doing. With that kind of attitude and spirit, I’m absolutely confident that our team at OKC will continue to deliver for our customers.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

(L-R) are George Ellis, Kyp Eidburg, both of AEM; Don Anderson; Rep. Steve Russell; Gov. Mary Fallin; John Garrison; Steve Filipov; Dennis Slater of AEM; and James Hooper.

SECTION

Trucks & Trailers Pages 27-28

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Mack Trucks Announces 2017 Mack Masters Champions The Mack Masters Competition, a biennial event designed to evaluate participants’ knowledge of Mack’s service systems and procedures, has concluded with a new team earning the right to call themselves Mack Masters champions. After several rounds of competition, including a comprehensive final challenge, the “Slackers” from CIT Trucks in Rockford, Ill., have been named champions of the second Mack Masters Competition. Team members include Jim Garner, Chris Zahara and father and son Tim Stahl and TJ Stahl. “There’s nothing like competition to make the best even better, especially in today’s world of sophisticated trucks and components” said Jonathan Randall, senior vice president, sales of Mack Trucks North America. “All of the teams demonstrated their commitment to superior service for Mack customers, but the team from CIT Trucks took it to a higher level. Congratulations to Jim, Tim, TJ and Chris on this great accomplishment.” The 2017 Mack Masters Competition kicked off this past January with early rounds of online challenges that tested competitors’ knowledge of Mack’s service systems and procedures. Nearly 2,000 individual participants on 457 teams from 16 coun-

tries took part, an increase of 80 pion. percent compared to the inau“These participants are the gural Mack Masters. After men and women who work tirecompeting in three rounds of lessly every day to keep our online challenges, nine teams of customers’ trucks on the road,” finalists were selected, with one Randall said. “Mack Masters team representing each of not only shines the spotlight on Mack’s regions: Central, their tremendous efforts, but Northeast, Southeast, also gives us a chance to hear Southwest and West for the from them on how we can United States, plus Canada, increase uptime for our cusCentral America, Mexico and tomers by improving our own South America. service processes.” The other finalists were Mack Trucks Academy coor“Bergey’s Bulldogs” from Mack Trucks crowned the “Slackers” from CIT Trucks in dinates the Mack Masters Bergey’s Truck Centers, Rockford, Ill., champions of the 2017 Mack Masters Competition Competition as part of its Souderton, Pa.; “Mack final held at the Mack Customer Center in Allentown, Pa. (L-R) responsibility for developing Madison” from Nextran Truck are Jim Garner, Tim Stahl, TJ Stahl and Chris Zahara. The CIT and implementing Mack servCenter, Madison, Ala.; Trucks team beat out eight others for the title during a compre- ice training and aftermarket “Master Slackers” from hensive, hands-on final challenge designed to test the skills of support programs. The acadeBruckner’s Truck Sales in Mack’s top service technicians. my is accredited by the Dallas, Texas; “BIG MACKS” National Institute for The final round of the competition fea- Automotive Service Excellence (ASE) for from Mountain West Truck Center in Salt Lake City, Utah; “Aftershock” from tured nine hands-on stations designed to Continuing Automotive Service Education Commercial Truck Repair in Ontario, challenge each team with a specific service (CASE). Canada; “Team Shareeza” from Massy situation that had to be completed in just 30 For more information, visit Machinery Limited in Trinidad & Tobago; minutes. Following the completion of a chal- www.macktrucks.com. “Hermosillo” from Tractoremolques Del lenge, teams rotated to the next one until all (This story also can be found on Noroeste in Mexico; and “Dream Team” nine were completed. Team results from all Construction Equipment Guide’s website at stations were tallied to determine the cham- www.constructionequipmentguide.com.) from Mack Peru.

XL Specialized Trailers Launches XL 130 HDG Multi-Axle Trailer XL Specialized Trailers features the new multi-axle XL 130 hydraulic detachable gooseneck (HDG) trailer in its lineup. This lightweight 2+2+2 configuration is capable of scaling 130,000 lbs. (58,967 kg) with a tandem axle set up, ideal for hauling in the southwest. The full multi-axle is 86 ft. 3 in. (26.3 m) long, while the HDG trailer is 57 ft. 3 in. (17.4 m) long. The main deck is prepped for heavy duty hauling at 28 ft. (8.5 m) long, 10 ft. (3 m) wide. Designed for versatile hauling, a 22-in. (55.8 cm) loaded deck height provides a solution for hauling taller equipment. A strong deck features upper flange

reinforcement with 12- and 4-in. (30.5 and 10 cm) junior I-beam cross members. In addition, Apitong decking — a wood stronger than oak — is raised at 1 ¾ in. (4.4 cm) for extra durability. The trailer is equipped with heavyduty swing out outriggers that offer a width of 24-in. (61 cm) to accommodate wide loads and is on 24-in. centers. XL’s 2+2+2 uses a 30,000-lb. (13,607 kg) air ride suspension and 30,000 lb. nominal axles. A detachable wheel area with horizontal pins enables users to add an additional deck section or beam deck for extra length. A bucket well at the rear allows equipment to ride lower,

while the 6-ft. toolbox in the front provides a storage area for chains and other materials. This custom 130 HDG is complete with many other standard features like manual ride height for adjusting the load height in the wheel area and an Air-weigh digital scale. In addition, the unit has a work light for better visibility when tying down at night, as well as several tie down options with D-rings and chain slots throughout. For more information, visit www.xlspecializedtrailer.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

XL Specialized Trailers features the new multi-axle XL 130 hydraulic detachable gooseneck (HDG) trailer in its lineup. This lightweight 2+2+2 configuration is capable of scaling 130,000 lbs. (58,967 kg) with a tandem axle set up, ideal for hauling in the southwest.

Page 28 • August 20, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

For Quality Management…

Trail King Promotes Anderson Felling Trailers Announces to Veep of Human Resources Its ISO 9001 Certification Felling Trailers Inc. has recently received ISO 9001:2015 Certification for its quality management system for its Sauk Centre, Minn., and Litchfield, Minn., operations. In addition to Felling Trailers Inc.’s 40 plus years of exceeding customers’ expectations, the company is now proud to add the ISO 9001:2015 Certification to its credentials. “This is a significant accomplishment for Felling Trailers Inc., and it does not happen with just one person. It took over a year for our company to get to this point with cooperation and teamwork among every team member,” said Brenda Jennissen, CEO of Felling Trailers Inc. “Our ISO journey has just begun. We will continue to work toward better processes and training, which will lead to continued efficiencies and sustainability of our ISO certification and ensuring we exceed customers’ expectations. I am proud of our entire team’s diligence and commitment to achieving this important goal.”

Trail King Industries Inc. has promoted Lee Anderson to vice president of human resources, safety and environmental of Trail King. In his new role, Anderson will be driving high level growth strategies focusing on headcount, retention and safety improvements. Anderson started with Trail King in June of 2012 and has had a major impact on improving the human resource, safety and environmental areas of Trail King in the last five years. “Lee is a very important member of the Trail King leadership team, in addition to contributing in his functional areas, he contributes from a business and market perspective,” said Bruce Yakley, president of Trail King. Prior to coming to Trail King, Anderson served in human resource roles for 15 years in heavy equipment and telecommunications companies. For more information, visit www.trailking.com.

In order to achieve ISO 9001:2015 Certification, companies must demonstrate that they have implemented effective quality management systems, including a strong customer focus and a process of continuous improvement across all areas of the business, including facilities, people, training, services, and equipment. Felling Trailers Inc.’s certification process was carried out in partnership with Transpacific Certification Ltd and included a detailed assessment of the company’s facilities. Interviews were carried out with management and employees, and procedures were reviewed across all functional areas, including operations, training, and development, customer complaint handling, finance and billing. For more information, call 1.800.245.2809 or visit www.felling.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Lee Anderson

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Travis Body & Trailer Expands North American Dealer Network Travis Body & Trailer, Houston, Texas, a manufacturer of aluminum end dump, bottom dump, transfer and specialty dump trailers and bodies, has added Florida Utility Trailers Inc. to its network in North America. Florida Utility Trailers Inc., Apopka, Fla., is a Travis Trailer dealer representing the full Travis Trailer product line. Florida Utility Trailers has been central and south Florida’s complete semi-trailer dealership for 30 years. The company serves customers from its four locations, in Orlando, Lakeland, Tampa and Miami. “The addition of Florida Utility Trailers to the Travis network provides exceptional dealer coverage in a critical market area,” said Greg D. Smith Travis, vice president of sales and marketing. “Our partnership with Florida Utility sends a strong message to our customers that Travis is affiliated with the best dealers in our industry.” The new dealership brings the total num-

ber of Travis dealerships and locations to 43 and 102, respectively. Florida Utility Trailers President Jack Beville said, whether a customer needs a Travis end dump, bottom dump, transfer live floor/tipper or rendering trailer, the company’s expert staff has the resources, experience and technology to exceed expectations. “We are excited to add Travis Trailers to our expanding list of products,” Beville said. “With the help of the Travis sales team, we will create some great new opportunities for our customers and dealership.” For more information about Travis Body & Trailer Inc., visit www.travistrailers.com. For more information about Truck Bodies & Equipment International Inc., visit www.tbei.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 29

TRI-WEST TRACTOR 6281 Southfront Rd. Livermore, CA 94551 925-455-8200 www.tri-westtractor.com

BANE MACHINERY, INC. 2449 Manna Rd. Dallas, TX 75520 214-352-2468

Tyler, TX 903-597-6641 Fort Worth, TX 817-847-5894

www.banemachinery.com

Orion Equipment

Scott Equipment

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

14635 Valley Blvd. Fontana, CA 92335 909-822-2200 800-316-0327 www.scottequip.com

Farmers Equipment Co. 410 19th St. Lynden, WA 98264 888-855-4981

17893 State Route 20 Burlington, WA 98233 888-855-4982

www.farmersequip.com

Page 30 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

The SEAL SAVER WILL:

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062 Fax: 770-509-5832

1-800-683-5189

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

ARTBA Examines Government Data to Track Bridge Repair Progress

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. With Komatsu CARE you can: • Lower your cost of ownership • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment

It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

WEST KOMATSU DISTRIBUTORS

Bacon-Universal Company, Inc. www.baconuniversal.com HI Hilo 808-935-8595 • 800-352-3508 Honolulu 808-839-7202 • 800-352-3508 Kailua-Kona 808-326-1212 • 800-352-3508 Kauai (Lihue) 808-245-8472 • 800-352-3508 Wailuku Maui 808-244-9158 • 800-352-3508

Clairemont Equipment Co. www.clairemontequipment.com CA Escondido 760-739-9100 Fontana 909-429-9100 Imperial 760-355-7700 Indio 760-863-5558 San Diego 858-278-8351

Kirby-Smith Machinery Inc. www.kirby-smith.com OK Oklahoma City 405-495-7820 • 800-375-3339 Tulsa 918-438-1700 • 800-375-3733 TX Abilene 325-692-6334 • 877-577-5729 Amarillo 806-373-2826 • 800-283-1247 Dallas 214-371-7777 • 800-753-1247 Ft. Worth 817-378-0600 • 877-851-9977 Lubbock 806-745-2112 • 866-289-6087 Odessa 432-333-7000 • 877-794-1800

Power Motive Corporation

A 100-foot (30.5 m) section of the Interstate 95 bridge collapsed in Greenwich, Conn. ARTBA from page 8

repair if the rating for a key component is four or below. While these bridges may not be imminently unsafe, they are in need of attention. The states with the biggest decrease in the number of structurally deficient bridges in the last 10 years: Oklahoma (2,458), California (1,861), Pennsylvania (1,466), Texas

(1,350), Missouri (1,282), Mississippi, (1,010), Ohio (1,008), Kansas (856), Alabama (712) and Indiana (536). States with an increased number of deficient bridges include: West Virginia (174), Idaho (52), Arizona (27), Delaware (22) and Rhode Island (21).

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.powermotivecorp.com CO Colorado Springs 719-576-5541 Denver 303-355-5900 Durango 970-259-0455 • 970-259-0456 Grand Junction 970-241-1550 Milliken 970-587-1188 WY Cheyenne 307-634-5149

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 31

Komatsu Equipment Co. www.komatsueq.com NV Elko 775-753-7557 North Las Vegas 702-399-1004 Sparks/Reno 775-356-1334 UT St. George 435-986-1000 Pleasant Valley 435-216-7777 Salt Lake City 801-972-3660 • 1-877-Komatsu South Jordan 801-972-3660 WY Casper 307-682-1445 Gillette 307-682-1445 Rock Springs 307-686-1300

Modern Machinery, Inc. www.modernmachinery.com ID Boise 208-336-8570 • 800-221-5211 Pocatello 208-233-5345 • 800-829-4450 MT Billings 406-252-2158 • 800-735-2589 Kalispell 406-755-5540 • 800-434-4190 Missoula 406-523-1100 • 800-332-1617 OR Eugene 541-688-7321 • 800-826-9811 Portland 971-222-1710 • 800-950-7779 WA Kent 253-872-3500 • 800-669-2425 Rochester 360-273-4284 • 800-304-4421 Spokane 509-353-1654 • 800-541-0754

Road Machinery, LLC www.roadmachinery.com AZ Gilbert 480-545-2400 Kearny 602-252-7121 Prescott 928-778.5621 Tucson 520-623-8681 • 800-989-8681 CA Bakersfield 661-695-4830 Fremont 510-659-1903 Fresno 916-350-0640 Perris 909-355-3600 Redding 530-229-3820 Pico Rivera 562-699-6767 West Sacramento 916-375-3540

Waukesha-Pearce Industries, Inc. www.wpi.com TX Beaumont/Port Arthur 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275 Edinburg 956-386-0107 Houston 713-723-1050 Kilgore 903-984-2011 Pflugerville 512-251-0013 San Antonio 210-648-4444 Tomball 281-351-9016

www.komatsuamerica.com/komatsu-care

Page 32 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OTC Awards Contracts for Bridges, Highway Improvement OTC from page 18

“Ten years ago, we knew that Oklahoma had some of the worst bridges in the nation,” Patterson said. “Additional dedicated state funding for transportation since 2006 and the work ethic of this agency have helped us make huge improvements by replacing or rehabilitating thousands of bridges.” The commission voted to award a $7.5 million contract that includes financial incentives for early completion to replace the U.S.-412/ U.S.-64 bridge over SH-151 near the Keystone Dam in Tulsa County. The structure has required 12 emergency repairs to the bridge deck since 2014. The commission also approved contracts for rehabilitation of several bridges, including SH-117 at Rock Creek in Sapulpa and U.S.-69 at U.S.-266 in Checotah and a county road near Oktaha. Commissioners voted to award 15 contracts totaling more than $19 million to improve highways, roads and bridges in 12 counties. Contracts were awarded for projects in Alfalfa, Beckham, Cherokee, Cleveland, Coal, Creek, Custer, Haskell, Lincoln, McIntosh, Tulsa and Woods counties. A list of all awarded contracts may be found by visiting odot.org/contracts, selecting the July 2017 letting and clicking Go and then Award. The eight-member panel, appointed by the governor to oversee the state’s transportation development, awards project contracts for road and bridge construction every month. Due to the Labor Day holiday, the commission’s meeting is scheduled for 11 a.m. Sept. 5. For more information, visit www.odot.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Associated General Contractors of Minnesota AGC of Minnesota SRI and Lifetime Achievement Awards DATE: October 26, 2017 Is there someone you work with who personifies the attributes of Skill, Responsibility and Integrity? Or whose outstanding contributions to the industry over an extensive career might earn them recognition with the Lifetime Achievement award? Nominations are now being accepted for the 2017 SRI and Lifetime Achievement awards, to be presented at a Recognition Dinner being held at the Saint Paul Hotel, Saint Paul, MN 55102 on October 26th. The deadline for submitting nominations is September 5. For more information on this dinner event, please contact Denise Woods at dwoods@agcmn.org or call AGC of MN at 651/632-8929. NYS WOODSMEN’S FIELD DAYS New York State Woodsmen’s Field Days 118 Main Street Boonville, NY 13309 DATES: AUGUST 18, 2017 to August 20, 2017 TIME: 12:00 AM PHONE: 315/942-4593 Website: www.starinfo.com/woodsmen Tigercat and CJ Logging will display the range of Tigercat Forestry Machines at the New York State Woodsmen’s Field Days in Boonville, NY. There will be over 100 Forest Industry Exhibits – Huge Parade, Fireworks, Craft Show, Beards Contest and Chainsaw Ice Carving. Events include NYS Open Lumberjack Championships, The Annual 10K Foot Race, World’s Open Lumberjill Championships and Horse Skidding to name a few! Rain or Shine! SOUTHWEST FOREST PRODUCTS EXPO 2017/ARK LOGGERS Website: http://arkloggers.com/ Contact us: http://arkloggers.com/contact-us/ Coming August 25 to 26, 2017 to HOT SPRINGS ARKANSAS The ATPA is proud to bring timber harvesters and other logging and forestry professionals its Southwest Forest Products Expo, an amazing indoor equipment and services showcase held at the Hot Springs Civic and Convention Center, Hot Springs, Arkansas. Join us as the partitions in the Convention Center open wide to make room for numerous large-scale equipment exhibitors and vendors from across the country, all under one roof. View lodging options and attractions behind the About Hot Springs tab, and be sure to download or have mailed to you the fantastic Hot Springs Vacation planning guide, courtesy of the Hot Springs Chamber of Commerce. PWA – American Public Works Association 2017 PWX Registration is NOW OPEN! Make plans now to be in Orlando, FL August 27-30, 2017! Come experience all the public works profession has to offer in Orlando at PWX 2017. PWX draws thousands of professionals from all over the world. If you are like many of them, you have limited

Quake Software Allows for Faster Response SOFTWARE from page 18

public safety that I’ve seen in my 30-year career at the department,” said Casey Shell, ODOT chief engineer. “By comparing state bridge data with the severity of an earthquake’s ground motions, ShakeCast will allow us to inspect fewer bridges but with a much greater degree of confidence that we could quickly find any potential damage.” The consultant assisted the department with interfacing ODOT bridge inventory data with the ShakeCast software, developing bridge fragility models and disaster preparation plans, training and implementing the alert system for bridge inspectors. ODOT Bridge Engineer Steve Jacobi noted that Oklahoma transportation infrastructure has withstood the increased number and severity of earthquakes since 2010 with two instances of cosmetic damage found after the 5.8magnitude Pawnee earthquake in September 2016 and minor damage to U.S.-62 pavement after a 5.6-magnitude earthquake near Prague in 2011. “Bridges are designed to national standards, which includes the ability to withstand vibration,” Jacobi said. “Oklahoma’s bridges have weathered the increased seismicity very well, and our data shows that even our oldest state highway bridge designs are safe at the earthquake levels experienced to date. However, the department is committed to visual inspections to ensure public safety after larger magnitude earthquakes. If there is ever even the slightest question about a bridge’s safety, it would be imme-

resources for professional development. PWX 2017 should be at the top of your list if you are looking for OUTSTANDING EDUCATION SESSIONS; a chance to meet with an extensive gathering of EXHIBITORS SHOWCASING THE LATEST PRODUCTS, SERVICES and TECHNOLOGIES; and for OPPORTUNITIES TO NETWORK WITH YOUR PEERS, HONE YOUR LEADERSHIP ABILITIES and LEARN NEW JOB SKILLS! Join nearly 6,000 of your public works colleagues from North America and beyond in Orlando for this exciting event! Register Today! Contact: American Public Works Association 1200 Main Street, Suite 1400 Kansas City, MO 64105-2100 Toll Free: 800/848-2792 Local: 816/472-6100, Fax: 816/472-1610

diately closed until more thorough inspections could be completed.” While seismic activity seems to have lessened in the state, Oklahoma’s chances of earthquake-related bridge damage also are lessened thanks to the replacement of more than 900 structurally deficient bridges statewide since 2004. There remain 251 structurally deficient bridges on the state highway system and the majority of those are scheduled for replacement in the Eight-Year Construction Work Plan by the end of the decade. ODOT has joined nine other earthquake-prone states in a pooled-fund study with the USGS to help further enhance ShakeCast. Some of the states include Texas, Missouri and California and the study information will be used to develop future versions of the software. ODOT is contributing an additional $45,000 to the USGS in a three-year period to the study. The department has taken a lead role in developing response protocols to Oklahoma’s increased earthquake activity by working closely with other state agencies such as the U.S. Army Corps of Engineers, which has 23 bridges on the state highway system. ODOT also shared its recently developed bridge inspection manual with other state agencies as well as local governments and will assist with local bridge inspections during earthquake response events as resources allow. For more information, call 405/521-6000 or visit odot.org.

The Associated General Contractors of America AGC OF AMERICA CONSTRUCTION HR & TRAINING PROFESSIONALS CONFERENCE DATES: SEPTEMBER 11-13, 2017 PLACE: HYATT REGENCY PHOENIX AZ For more information on this Conference, contact Samantha Hamel, Director of Marketing, Sponsorships and Partners. Phone: 703/837-5345. Email: Samantha.hamel@agc.org or Cheyenne Brewbaker, Associate Director of Marketing, Sponsorships and Partners. Phone: 703/837-5352. Email: Cheyenne.brewbaker@agc.org.

Missouri Land Improvement Contractors Association GOLF OUTING & “FUN-RAISER” Associated General Contractors of Minnesota DATE: SEPTEMBER 15, 2017 AGC of Minnesota Lunch at NOON; SHOT-GUN start at 1:00 PM Sporting Clays Fundraiser PLACE: Cameron Veterans’ Memorial Golf Club th Join us for the 18 annual Sporting Clays Fundraiser on Monday, 1000 Park Avenue August 28, at Minnesota Horse and Hunt Club in Prior Lake. Cameron, MO Proceeds from the event benefit scholarships presented by the AGC of For more information on this event, contact Missouri LICA State Office, Minnesota Foundation to students in postsecondary construction- Deb Dickens, Executive Director, 1101 West High Street, Jefferson related programs. For more information, contact the AGC of City, MO 65109. Phone: 573/634-3001. Email: MLICA@aol.com. Minnesota at 651/632-8929; dwoods@agcmn.org; http://www.agcmn.org. 31st KENTUCKY WOOD EXPO Masterson Station Park 14th Annual Old Construction & Mining Equipment Show 3051 Leestown Road Dates: September 9-10, 2017 Lexington, Kentucky 40511 Place: Harrison Coal & Reclamation DATES: SEPTEMBER 15 – 16, 2017 Historical Park Ohio 519, between Kentucky Wood Expo is a 2-day event being held from 15th New Athens, Ohio and U.S. Route 22 September to the 16th September 2017 at the Masterson Station Park just over one (1) mile West of New in Lexington, Kentucky, USA. This event showcases products from Athens, Ohio the furniture industry. The event is dedicated to serving and promot(42500 Stumptown Road, Cadiz, ing the forest products’ industry of Kentucky and is an exclusive gathOhio) ering place for all the wood trade experts. The show will demonstrate www.HCRHP.ORG the latest wood materials, panels and covering products, hardware Old trucks, crawlers, construction, and mining equipment and accessories. The Kentucky Wood Expo will help the attendees Operating equipment digging and moving the earth. to discover a diverse range of fascinating displays related to wood Show hours: Saturday 10 AM to 6 PM; Sunday 9 AM to 4 PM. products. The visitors learn the various brands that are associated Admission: $3.00 with the wood industry. The show will have 1,200 participants For show information contact HCEA-OVC: 740/312-5385 or which will draw in 4,000 visitors from fifteen states. This will prove 330/618-8032. to be a productive platform for the exhibitors to gain new contacts Email: Oldironshow@yahoo.com. www.Facebook.com/OCMES. and expand the network. For more information on this Expo, contact Kentucky Forest Industries Association, 106 Progress Drive, 55th Annual STUMPTOWN STEAM THRESHERS REUNION Frankfort, KY 40601. Phone: 502/695-3979. DATES: SATURDAY/SUNDAY – SEPTEMBER 9th and 10th, 2017 38th ANNUAL NEW ENGLAND PUBLIC WORKS EXPO Location: On SR 519 One Mile West of New Athens, Ohio, DATES: SEPTEMBER 20th and 21st, 2017 between U.S. 11 and SR 9 PLACE: Boxboro Regency Hotel and Conference Center Antique Steam Engines, Gas Engines & Gas Tractors, Threshing 242 Adams Place, Boxborough, MA 01719 Grain, Bailing Straw, Sawing Lumber, Sawing Shingles, Grinding Educational Seminars: Wednesday: 10:00 AM to 12:00 PM Corn into Corn Meal with Stone Burr Mill, Flea Market, Ladies Thursday: 10:00 AM to 12:00 PM Auxiliary Raffle & T-Shirts. We hope you will be joining us this year for an exciting show – and Meals, Lunch Snacks, Open Kettle Cooked Beans & Corn Bread. remember, admission is FREE to all who attend! MARK YOUR CALGRAND PARADE 4:00 PM. ENDARS! Wednesday, September 20th and Thursday, September 21st. Admission $5.00 per day or Membership Card: Membership The 2017 New England Public Works Expo is being held at the $6.00, includes Badge. Alcoholic Beverages prohibited. Not Boxboro Regency Hotel and Conference Center in Boxborough, MA, responsible for Theft, Loss or Accident. ATVs Prohibited. Firearms conveniently located off Route 495. Please note that the location is Prohibited. the same as last year but the name of the hotel has changed. It was formerly called the Holiday Inn. This year will mark the 38th anniverChildren under 12 Free! For general information, contact Kevin sary of the Massachusetts Highway Association’s equipment and Johnson at 740/968-4796.

trade expo, long recognized as one of New England’s largest equipment expos. The show features some of the region’s latest heavy equipment, construction, municipal and highway products & services from top vendors. The show has come a long way since its humble beginnings. It has become the premiere heavy equipment and trade show in New England! Last year’s expo was a sellout with over 160 vendors displaying their products and services. The expo was well attended with over 1,600 visitors passing through the trade center during the two-day show. For more information, contact www.nepublicworksexpo.org. MAPA SPORTING CLAYS EVENT MINNESOTA ASPHALT PAVEMENT ASSOCIATION DATE: MONDAY, SEPTEMBER 25 LOCATION: Wild Marsh Sporting Clays 13481 County Road 3 SE Clear Lake, MN 55319 USA PHONE: 320/743-4960 WEBSITE: www.wildmarshsportingclays.com MAPA will be hosting a sporting clay event for members. Dinner will be provided with signup. There will be two (2) rounds of 50 targets available per person. The groups will consist of four (4) people per team. Some brief instructions will be available when you check in at the clubhouse. You must bring your own shotguns for use. It must be in good working order and be able to hold two (2) shells. You are allowed to share shotguns, but it is recommended you have your own gun. SAFETY IS EVERYONE’S RESPONSIBILITY! Please treat every gun as you would a loaded gun. Keep your actions open on your shotgun until it is your turn to shoot and you are in the shooting station. Alcoholic beverages are prohibited before or during shooting. MAPA reserves the right to cancel and/or reschedule. Station Sponsorship (Coming Soon): $150 to Sponsor a station at MAPA’s Sporting Clay Event…Includes a sign with your company logo. You may send someone from your company to attend the station to give out items. No alcoholic beverages allowed. Proceeds will go for prizes at dinner. 4th ANNUAL FLEXIBLE & COST EFFECTIVE WELL SITE FACILITIES ONSHORE 2017 DATES: 27 September to 28 September, 2017 PLACE: Houston, TX North America’s Only Initiative Dedicated Entirely to Facilities Engine Missouri Land Improvement Contractors Association (MLICA) Competent Person Training Date: September 29, 2017 Time: 1:00 PM to 5:00 PM Place: Bobcat of St. Louis – Columbia 1101 North Lenway Columbia, MO Southeastern Equipment Company, Inc. 60th Anniversary Open House Event. CAMBRIDGE, OHIO 10874 East Pike Road OCTOBER 13, 2017 10:00 AM to 2:00 PM; 5:30 PM to 8:30 PM For more information, contact: Southeastern Equipment Co., Inc., 10874 East Pike Road, Cambridge, OH. Phone: 800/798-5438.

Pages 33-41

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Urbanization Creates Challenges in Crushing Business By Juhamatti Heikkilä SPECIAL TO CEG

Urbanization means faster and more numerous construction projects. This is good news for the crushing business, but it also brings along new challenges. Cost structures are changing, which makes it necessary for crushing to take place closer to the actual construction site. Simultaneously, crushing within cities is becoming more tightly controlled through environmental and safety regulations. We believe that sustainability and operational flexibility should and can be built into the same package. That’s why we made Lokotrack an urban citizen. Our customers have an increasing need for crushing operations close to densely inhabited areas, even in the centers of cities. Especially in fast-growing countries, where cities are quickly expanding and masses of people are moving closer to what would be considered traditional crushing sites, urban crushing is often a necessity. These operations are regulated by environmental permits that vary from country to country. When designing the new Lokotrack Urban, we wanted to simplify the answer to some of these key environmental and operational challenges with a single solution. Challenge 1 — Solving the origin of disturbances The main issues for crushing rock close to communities are noise and dust emissions. Areas with bad air quality have increasingly tight limitations for dust emissions, whereas long-term exposure to loud crushing noise, both for employees on site as well as people living nearby, leads to various health concerns. Solution: Since noise is one of the key issues, we decided to find the root cause that makes crushing noise disturbing. To do so, we collaborated with some of our local authorities, research organizations and private companies operating with acoustics and communal design. Our solution focuses particularly on the reduction of crusher noise, which makes the whole crushing operation less disturbing. Since noise protection mechanisms need to be as air-tight as possible, they also help to manage dust emissions.

The Lokotrack Urban

This is especially the case when combined with other dust prevention features, such as a high-pressure water spraying system. Challenge 2 — Transportability and making operations easy Noise and dust are not the whole story. One common target for most operators is to limit the need for transportation. In the worst-case scenario, demolition waste from construction and rock from quarries are transported back and forth. This leads to hundreds of truckloads, increased transportation costs, more traffic and emissions — and even delays in construction projects. Many quarry operators also work in multiple sites, and equipment may need to be moved several times a week. Solution: A machine designed for shortterm use must be both robust and compact. We decided to utilize proven technology — but to add new noise and dust protection features to build a unique machine. As the base

technology, we chose LT106, one of our most widely used mobile crushing plants in the market. We paid special attention to make it as easy to maintain as possible. If needed, Urban can be “packed up” for transportation in only 15 to 30 minutes. The compact machine is also easy to move around within the same site. Ideally, aggregates can be used in the same location to completely avoid hauling. Challenge 3 — Beating the regulations When operation is planned for a limited period of time, using mobile equipment is often the most ideal choice. With mobile plants, however, it doesn’t make sense to invest in the same added protection mechanisms as with stationary plants. Therefore, it may prove difficult to comply with the environmental permit regulations. Solution: Urban has all the necessary features built in to fulfill these regulations. Feedback we have received from the field

supports the fact that using Urban has a positive impact on the permit process, especially when it comes to getting a short-term permit. Can Urban Crushing Change the Way We Build Infrastructure for Good? Whether crushing closer or farther away from cities, demands will continue to increase for smoother, safer and more sustainable crushing operations. Regulations as well as cost structures are changing, and equipment too must support these developments. We at Metso are ready to take the challenge. Feel free to contact our experts and join the conversation at Metso Lokotrack channel in Facebook. Juhamatti Hiekkilä is manager, product safety of Metso Corporation.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 34 • August 20, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Terex Launches Aquaclear Water Management Solutions Terex Washing Systems (TWS) announced the introduction of Terex AquaClear, water management solutions, as part of TWS product offerings. TWS Director Oliver Donnelly said, “It really is an exciting time for TWS and we are delighted to be able to offer an end-toend solution for washing and water management from TWS, a single supplier. We are launching a full range of water management products to include clarifying tanks, flocculent dosing systems, filter presses and all associated equipment to provide a one stop solution.” Efficient Water Solutions Water Management Solutions are made up from three main components; a floc dosing plant and thickener tank can be used to recycle up to 80 percent of the water used in the washing process. This basic method still involves the use of ponds but on a smaller scale as the sludge sent to the ponds is of a much higher specific gravity (1.5 sg). The next stage is to incorporate a filter press which hydrates this thickened sludge even further, typically down to 25 percent moisture. The filter press eliminates the need for ponds as the sludge is hydrated to a material/cake,

Terex Washing Systems (TWS) announced the introduction of Terex AquaClear, water management solutions, as part of TWS product offerings.

which can be handled by a loading shovel. This cake can be used as a lining or capping material.

alongside Aggregate Machinery Inc. (AMI) which is located in Portland, Ore., with whom they have a strategic alliance.

Raising the Bar TWS is committed to continuous expansion of its product offering and this entry into water management, according to the company. TWS will commence manufacture of the Water Management Solutions in Northern Ireland later this year, working

The Icing on the Cake TWS also is investing in a focused technical team to support the new Terex AquaClear water management offering and to that end is appointing a dedicated team consisting of a product manager, engineers and applications specialists

together with a cutting edge new laboratory specifically designed for material testing and sample pressing. This will ensure optimum equipment selection and specification for its customers, according to the company. For more information, visit www.terex.com/washing.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

IROCK’s TS-512 Offers Hassle-Free Setup, Portability IROCK’s TS-512 tracked screening plant gives small- to medium-sized producers a dependable and easy-to-use machine for sizing and sorting a wide range of materials, including aggregates, coal, concrete, gravel, limestone, sand and topsoil. IROCK Crushers designed the unit for fast and easy setup as well as hassle-free onsite mobility. The TS-512 screener features two high-energy, two-bearing decks; a 12- by 5-ft. (3.6 by 1.5 m)

top deck and a bottom deck that is 10 ft. 4 in. by 5 ft. (3.1 by 1.5 m), giving producers ample screening area of 112 sq. ft. (10.4 sq m). The interchangeable screen media gives producers versatility over end product size. The unit optimizes productivity with its 12-cu.-yd. (9.1 cu m) hopper and 100-hp Cat Tier III engine that enables the screener to process as much as 400 tons (363 t) per hour of material. The TS-512’s three conveyors sort as many as

three sizes of product into stockpiles 16 ft. 5 in. (5 m) high. The TS-512 is the tallest in the industry, which allows operators to put more material under the belt before moving the screener from one stockpile to the next, according to the manufacturer. Users can set up and tear down the screen quickly and easily. Many components, such as the conveyors, are hydraulically powered so operators quickly and simply move them into place for pro-

IROCK’s two-deck TS-512 portable tracked screening plant offers hassle-free setup and portability.

duction or fold them down for transportation. The TS-512 also features intuitive, easy-to-use controls to further enhance efficiency. IROCK built the TS-512 to withstand the rigors of day-to-day use. It features a solid, heavy-duty steel chassis that provides ultimate durability on the site and during transportation. Customers can choose the standard tracked model that optimizes maneuverability around the job site or the wheeled version for fast and easy towing.

Maintenance is simple with the TS-512’s easy-to-access engine compartment that provides generous room for repairing or replacing components. IROCK offers several additional features to customize the unit for specific applications. An optional remote-controlled livehead effectively sizes and loosens heavy, dirty and sticky debris from product before it enters the hopper. This expedites the screening process and boosts productivity. Users choose from the standard tethered remote or IROCK’s optional wireless remote for greater flexibility around the site. A crusher chute gives producers the option to directly feed material into the hopper without removing the tipping grid. A single shaft shredder is also available for proper topsoil screening. For more information, call 866/240-0201 or visit www.irockcrushers.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 20, 2017 • Page 35

www.PacWestMachinery.com

PACWEST MACHINERY 8207 South 216th St Kent, WA 98032 206-762-5933 4030 East Trent Ave Spokane, WA 99202 509-534-5933

19255 NE Sandy Blvd Portland, OR 97230 503-252-5933 1550 Irving Rd Eugene, OR 97402 541-302-3762

Metso’s Lokotrack® LT106™ jaw crusher: Meeting your demands for high capacity with maximum efficiency That’s how we make the big difference, the Metso Way.

234 East O Street • Colton, CA 92324 800-949-9014 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303

CUTTING EDGE SUPPLY

www.compassequip.com 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610

COMPASS EQUIPMENT

Improve the efficiency and profitability of your crushing operation with the redesigned Lokotrack® LT106™ jaw plant. New features, including a radial side conveyor, high inertia flywheels, and an IC700™ process control system, ensure high productivity, user-friendly operation, and good mobility in tough crushing applications. The LT106 is also available with Metso’s Fleet Management technology, providing remote monitoring of functions, parameters, and location for more efficient operation. Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay

www.crispindustries.com 323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 Seguin, Texas 78155 • 830-372-1110

CRISP INDUSTRIES, INC.

www.wheelercat.com/crushing 801-679-4721 info@wheelercat.com

WHEELER CRUSHING SYSTEMS 451 North Lund Highway Cedar City, UT 84720 5300 West Wheeler Way Hurricane, UT 84737 239 North 1800 West Lindon, UT 84042 95 North 1000 West Logan, UT 84321 1831 S. Highway 191 Moab, UT 84532

2366 South 1900 West Ogden, UT 84401 1345 South State Street Salina, UT 84654 1345 South 1500 East Vernal, UT 84078 4901 West 2100 South Salt Lake City, UT 84120 Boise, ID 800-779-4450

www.wagnerequipment.com 18000 Smith Rd. • Aurora, CO 80011 303-739-3000

WAGNER EQUIPMENT CO. Burlington, CO 719-346-7880 Colorado Springs, CO 719-390-7316 Durango, CO 970-259-2001 Grand Junction, CO 970-242-2834 Hayden, CO 970-276-3781 Pueblo, CO 719-544-4433

Windsor, CO 970-278-1750 Yuma, CO 970-848-2911 Albuquerque, NM 505-345-8411 Farmington, NM 505-327-5331 Hobbs, NM 575-393-2148 El Paso, TX 915-821-7651

www.westate.com 3809 Hwy. 312 • Billings, MT 59105 800-999-6676

WESTATE

Page 36 • August 20, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

GrinderCrusherScreen Unveils Product Reduction Technology GrinderCrusherScreen Inc. introduced a unique product reduction technology called “TKV,” short for Tornadic Kinetic Vortex, nicknamed “Tornado in a Can.” This technology has been in existence for years; however, the price has made it out of reach, until now. After much product development, GrinderCrusherScreen is promoting the “TKV” as its choice of technologies for a secondary grinder for many applications where a fine material is needed “TKV” can take bark nuggets to powder, unscreened compost to a fine highly desired material, roofing shingles to a fine grade recycled material, MSW to fluff, glass to sand or powder and manure to fertilizer. Company representatives say that this technology is like having a tornado pass material through an 8’-0 nonagon steel structure with ¾” steel walls. The destruction is vast, and it rivals sticking a tornado inside a nine-sided structure where the devastation is magnified and devastating. The flying material is quickly reduced by hitting each other and by slamming into the nine walls. Unlike traditional grinders where the hammers and tips do the grinding, in this technology the machine is creating vortexes. The result of the vortexes is material reduction. The result is considerably lower operating costs, less wear on the machine and a more economical way to process. GrinderCrusherScreen is promoting the GCS Tornadic Kinetic Pulverizer as a secondary processor able to accept 12 in. minus material. Regardless of the material, GrinderCrusherScreen recommends the use of a shredder with a magnet for primary shredding, and the “TKV” for the finishing work. The “Tornado in a Can” technology gives customers the ability to produce considerably finer material than traditional equipment. For more information, call GrinderCrusherScreen at 770433-2670. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) GrinderCrusherScreen Inc. introduced a unique product reduction technology called “TKV,” short for Tornadic CEG

Kinetic Vortex, nicknamed “Tornado in a Can.”

GrinderCrusherScreen is promoting the GCS Tornadic Kinetic Pulverizer as a secondary processor able to accept 12 in. minus material.

Company representatives say that this technology is like having a tornado pass material through an 8’-0 nonagon steel structure with ¾” steel walls.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 20, 2017 • Page 37

CRUSHING

MA ATERIAL TERIAL HANDLING HAN NDLING

SCREENING

TRACKS

www.modernmachinery y.com

WASHING W ASHING & CLASSIFYING CL LASSIFYING

970-259-0455 970 259 0455 307-634 307 634 4-5149 4 5149 www.powermotivecorp.com p p

The complete source for equipment in th he aggregate, construction and recycling industries. tries. Offering industry-leading brands such as the Piioneer Jaw Crusher, Kodiak® Plus Cone Crusher, SuperS Stacker® ® ® ® Extendable Stacker, ProSizer Mobile Screening g Plant, Combo Screen, Vari-Vibe a High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 0 equipment, Fast Trrax, Global Track and FastPack.

www.k kpijci pijci.com com

Page 38 • August 20, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

164 S. Michigan St. • Seattle, WA 98108

(206) 264-8551 info@evergreen-tractor.com

www.Evergreen-Tractor.com

Heavy Equipment Sales & Rentals

2016 TEREX FINLAY J1175 P.O.R. 30”x42” Chamber C/W Over Band Magnet, Radio Remote, Bypass Conveyor, Deflector Plate, Rip Stop Belt, hopper Extensions, Hydraulic Raise- Lower of Main Conveyor Telemetry, Tier 4 Final Engine

2017 TEREX FINLAY TC65 $93,900 65’ x42’ C/W Hopper Extensions, Impact Rollers, Tier 4 Engine

2016 TEREX FINLAY 893 P.O.R. 6’20’ 2 Deck, hydraulic Tension Bottom Deck, Hydraulic Cleaning Brush, Folding Hopper Extensions, 10mm Abrasion Retain Hopper Plating

2013 TEREX FINLAY C1540 $465,000 L.K.E. Sale 40" Cone Chamber, Metal Detector Tier 4 Engine

2008 CAT 972H $149,500 9589 Hours, C/W 95%, 26.5x25R L4 Tires, Coupler and Plumbing

2011 MOROOKA MST1500V Sale Price: $85,900 1460 Hours, Enclosed Cab, A/C & Heat QTY 3 Available

2007 KOMATSU PC 200-8 HYDRAULIC EXCAVATOR $61,000 24" Pads C/W Hydraulic Pin Grabber STD Bucket Aux Plumbing

2015 TEREX FINLAY I110RS P.O.R. Equipped w/ Recirc. System, 5x12 Double Deck, 40" x 40" Tier 4 Engine

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 20, 2017 • Page 39

Problem.

Solution.

Result.

CRUSH EVERY JOB

AMERICAN-MADE INNOVATION SINCE 1966

800-837-3344

740-927-3464

email@screenmachine.com

Learn more at www.screenmachine.com

Page 40 • August 20, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Junjin America’s Success Continues With Rock Commander The Rock Commander line of rock drills from Junjin America continues its strong penetration in the North American drilling market. With many units working across the United States, and more units on the way, the Rock Commander line of drills is poised to be a major player in the near future, according to the company. The reliability, ease of maintenance, parts availability and reasonable price make the units easy to own, operate and maintain for anyone, from an owneroperator to a major quarry or construction operation. Industry tested and proven core components make up the heart of the Rock Commander JD1400E. The power is supplied by an 8.3 liter Cummins engine. The Bosch/Rexroth pumps, manufactured to precise specifications, are an industry standard, and customers can rely on the GHH Rand 400 CFM compressor, according to the company. Finally, the industry proven and powerful Yamamoto drifters enable customers to put more holes in the rock while being simple and relatively inexpensive to maintain. The Rock Commander’s design is straightforward and simple. Drilling computers and expensive PLC units are nowhere to be found on the Rock Commander. Its proven systems can be maintained without

the need for technicians with computers and long delays waiting for electronic parts. The customer’s needs are the foremost concern of Junjin America. The JD1400E continues its success with several customers ordering additional units to update their fleets. Options for the JD1400E include water suppression, YH135 or YH80A Drifter and a longer mast length option, which is also being developed for future units. Utilizing these options, customers can tackle just about any drilling job. Early in 2016, the first JD800ENC was introduced to the United States. The JD800ENC provides the same simple and efficient systems found in the JD1400E in a smaller non-cab model of drill. It is powered by a Cummins Power-pack and utilizing the proven YH80A Drifter. This unit is equipped to fill the need for a low-cost, reliable site preparation drill. The standard long mast configuration allows the use of a 20-ft. starter rod followed by additional 12-ft. rods if needed. For more information, call Junjin America or Larmee Equipment at 502/244-0004. (This story also can be found on Construction Equipment Guide’s website at The Rock Commander line of rock drills from Junjin America continues its strong penetration in the North American drilling market. www.constructionequipmentguide.com.)

It only takes a moment to make a moment.

Take time to

be a dad today.

fatherhood.gov

#makeamoment

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 20, 2017 • Page 41

234 East O Street • Colton, CA 92324 800-949-9014 • Fax: 909-825-4569 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303

CUTTING EDGE SUPPLY

www.crispindustries.com 323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 Seguin, Texas 78155 • 830-372-1110

CRISP INDUSTRIES, INC.

www.compassequip.com 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 • Fax: 530-533-7657

COMPASS EQUIPMENT

WHEELER CRUSHING SYSTEMS www.wheelercat.com/crushing 801-679-4721 info@wheelercat.com

451 North Lund Highway Cedar City, UT 84720

2366 South 1900 West Ogden, UT 84401

5300 West Wheeler Way Hurricane, UT 84737

1345 South State Street Salina, UT 84654

95 North 1000 West Logan, UT 84321

4901 West 2100 South Salt Lake City, UT 84120

239 North 1800 West Lindon, UT 84042

1831 S. Highway 191 Moab, UT 84532

1345 South 1500 East Vernal, UT 84078

Boise, ID 800-779-4450

www.westate.com 3809 Hwy. 312 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553

WESTATE

Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.

A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates #TheMetsoWay

Page 42 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 16-17 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 16-17 DH Call McLaren 888-492-4230

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 16-17 DH Call McLaren 888-492-4230

Serving the Construction Industry Since 1989 Trench Shoring - Confined Space - Pipe Plugs Rentals - Sales - Service 16-17 PK 800-828-8505

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

CLASSIFIEDS

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states .............................................................Call

For more information, call Construction Equipment Guide today at

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us

800/523-2200

CRAWLER TRACTORS Crawler Tractors

‘10 John Deere 650J LT Stk #10797, OROPS, 6- Way Blade, 18’’ Pads, 9’7’’ Wide, 3,397 hours ..............$52,500. ‘07 John Deere 650JLGP, Stk #10611, OROPS, Eng. Encl., Rear screen, 6-Way Blade, 28’’ Pads, 80% U/C,10’4’’ Wide, 4,738 hrs ...... ..................................$49,500. Hendrix Machinery, LLC 1-936-327-5430

EXCAVATORS Hydraulic Excavators

17-18 TM

‘06 Komatsu PC300LC - 7E0, #91808, Cab A/C, 33.5’’ Tracks, 13’ Arm, Aux Hyd’s, Thumb, JRB QC, Komtrax, 5,600 hours ................................$169,500. Road Builders Machinery and Supply Co., Inc. 866-485-7180

LOADERS Skid Steer Loaders 2003 Komatsu SK714-5, #50291, OROPS, Aux Hyd’s, Rear lights, 1,200 hours.......... ..................................$25,500. Road Builders Machinery and Supply Co., Inc. 866-485-7180 2015 Cat 262D, Stk #10800, EROPS, A/C, 72’’ Bucket, Aux Hyd, 12x16.5 Tires, 4 Cyl Cat Engine, 527 hrs ........$39,500.

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 16-17 EB

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200

Hendrix Machinery, LLC 1-936-327-5430

RECYCLING EQUIPMENT Crushing 2005 Pegson 1412, Impact Crusher, Cat C-12 Diesel Engine, 54’’ Rotor, Used condition, 4,078 hours ....$155,000.

Komatsu Northeast 908-561-9000

Trenchers

Hendrix Machinery, LLC 1-936-327-5430

$40

ONLY

Construction Equipment Guide is THE Place to List It!

TRENCHING EQUIPMENT

2007 Ditch Witch RT40, Stk #9992, OROPS, 64’’ Push Blade, 6’’ Trench, 26x12.00x12 Tires, 3 Cyl Deutz Eng., 1,181 hours ........................$16,500.

DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL? 2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

Call 800-523-2200

Next Issue Closes August 24th

You must have a classified print ad to do so.

or go online to place your ad

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 43

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted

WANTED: NEEDED BULLDOZER NEEDED BULLDOZER KOMATSU 51PX 23 ENC CAB 28 INCHES AS DES 2016 AND UP UNDER 600 HOURS UNADVERTISED USER USA AND D11T ENC CAB 2016 UNDER 6000 HOURS USER UNADVERTISED OR PAST THANKS CONTACT: JEAN MAURICE BOUTIN PH: 450-346-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: PARTS FOR 15 INTERNATIONAL. TRACKS, SPROCKETS, ROLLS INTERNATIONAL SERIAL #25752 OR JUST TRACKS. PLEASE CALL 716-4858270. CONTACT: JOE BITTINGER PH: 716-485-8270 EMAIL: JOELIND@FAIRPOINT.NET –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER WANT TO BUY BULLDOZER 375A-3, 375A-5 ENC CAB RIPPER D10T D11T ENC CAB RIPPER IN THE WORLD UNADVERTISED 12 MONTHS LOW HOURS CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: AG & CONSTRUCTION MANUALS BUYING NEW OR USED CONSTRUCTION AND AGRICULTURE SERVICE, PARTS AND OPERATOR MANUALS. IF YOU HAVE MANUALS YOU NO LONGER NEED OR PERHAPS YOU NO LONGER HAVE THAT MACHINE FOR THAT CERTAIN MANUAL, PLEASE GIVE ME A CALL. I BUY LARGE AND SMALL LOTS OF MANUALS. CONTACT: JOHN WHITNEY PH: 530-864-0771 EMAIL: WHITNEYJ65@YAHOO.COM FAX: 530-864-0771 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 110 TLB I'M LOOKING FOR A LATE MODEL IN VERY NICE SHAPE UNDER 1K HOURS WITH AUX HYDRAULICS FRONT AND REAR. A 4 IN 1 BUCKET AND A THUMB WOULD EXTRA NICE. CONTACT: KEN FAINT EMAIL: KFAINT@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 544J OR LARGER • 2005-2007 JOHN DEERE 544 J WHEEL LOADER CONTACT: PATRICK J. BUGGY PH: 970-497-8221 EMAIL: PBUGGY@SJCCO.COM –––––––––––––––––––––––––––––––– WANTED: CAT 140G LOOKING FOR CAT 140G. PLEASE EMAIL ME AND SEND DETAILED PICTURES OF AVAILABLE EQUIPMENT. CONTACT: NAQIB KHAN PH: 03-333-298-751 EMAIL: NAQIB_KHAN73@YAHOO.COM ––––––––––––––––––––––––––––––––

WANTED: NEED BULLDOZER WANT TO BUY BULLDOZER KOMASTU 375A 5 OR 375A 6 WITH RIPPER, USA LOCATION FROM USER UNADVERTISED. NEED 3 PLEASE CONTACT: JEAN MAURICE BOUTIN PH: 450 346 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS • WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDED TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: DRESSER 200 TRAC LOADER RUNNING OR NOT - FOR PARTS CONTACT: STANLEY FELLS PH: 785-257-3360 EMAIL: SFELLS@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER NEEDED BULLDOZER D10N WITH RIPPER, KOMASTU 375A 3 WITH RIPPER, 475A 5 WITH RIPPER FOR PIECES OR RUNNING. USA LOCATION CONTACT: JEAN MAURICE BOUTIN PH: 450 346 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: SCRAP/ BROKEN CONSTRUCTION MACHINERY I AM LOOKING FOR SCRAP/ BROKEN CONSTRUCTION MACHINERY. IF YOU HAVE 1 OR 1000 PIECES I WILL PURCHASE AND THE PICKUPS ARE FREE. BACK HOES, LOADERS, EXCAVATORS, FORKLIFTS, CRANES, SKID STEERS, CONVEYORS, PLUS MANY MORE! I WILL PICK UP ANYWHERE IN NORTH AMERICA. ALL I NEED ARE PHOTOS AND DESCRIPTIONS OF YOUR MACHINES. I AM CURRENTLY PAYING $60.00 PER TON ON ALL UNPREPARED STEEL. CONTACT ME ANY TIME. THE BEST WAY TO REACH ME IS BY PHONE; MY EMAIL IS NOT ALWAYS WORKING. CONTACT: ROBERT COOPER PH: 979-341-9006 EMAIL: CONSTRUCTIONEQUIPMENT4LESS@ GMAIL.COM FAX: 979-341-9006 ––––––––––––––––––––––––––––––––

WANTED: REAR AXLE I AM LOOKING FOR A COMPLETE REAR AXLE ASSEMBLY FOR A HYUNDAI HL 757-7 SN LD0110229. IT IS A VOLVO AXLE OEM REAR AXLE PN 81LD-20010 SUPERCEDING # 81LD-20011 DIFFERENTIAL CARRIER PN XKBQ-00476 HOUSING CASTING PN 7126-24100. WOULD BE ALSO OK WITH CONVENTIONAL OR LIMITED SLIP DIFFERENTIAL. PLEASE LET ME KNOW IF YOU HAVE ANY OPTIONS AVAILABLE OR IF THERE IS ANY OTHER INFORMATION YOU MAY NEED. CONTACT: DON L. PH: 585-584-3425 EMAIL: DONL@GEORGEANDSWEDE.COM FAX: 585-584-8290 –––––––––––––––––––––––––––––––– WANTED: CAT D5B LGP CAT D5B LGP MODEL CONTACT: MOLAI PH: 630-379-9175 EMAIL: MANSOOR.MOLAI@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER WANT TO BUY BULLDOZER D10N D10R ENC CAB WITH RIPPER UNADVERTISED NEED KOMATSU 375 A 3 475A 3 FROM BANK REPOS OR FOR PIECES CONTACT: JEAN MAURICE BOUTIN PH: 450-346-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K 4 YD BUCKET DEERE 644K 4.0 YD GP BUCKET CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: STEEL END DUMP TRAILER OLDER MODEL 25 TO 35 FT END DUMP TRAILER STEEL TANDEM OR TRI, USED CONDITION FINE CONTACT: CHRIS BAREFOOT (PH: 919-622-0160) EMAIL: TLCWORKSINC@GMAIL.COM FAX: 919-207-0571 –––––––––––––––––––––––––––––––– WANTED: APE 200-6 APE 200-6 – VIBRATORY HAMMER AND POWERPACK WITH 11’ CASSION BEAM APPROX. WITH DUAL CLAMPS TO INSTALL AND EXTRACT ROUND STEEL CASING CONTACT: COLLEEN DOUTY (PH: 214-226-6867) EMAIL: CDOUTY@OVERLANDCORPORATION.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER WANT TO BUY BULLDOZER- KOMASTU 375A 3 AND 475A 3 WITH RIPPER, 1996 TO 2005 RUN OR PIECES MUST BE UNADVERTISED PLEASE CONTACT: JEAN MAURICE BOUTIN (PH: 450-346 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA ––––––––––––––––––––––––––––––––

WANTED: FORGING PRESSES LOOKING FOR FORGING PRESSES, 1350 TON, 1600 TON AND 2500 TO 4000 TON ALL MECHANICAL CONTACT: HERB KAISER (PH: 248-680-1000) EMAIL: HERB@GIBBSIND.COM –––––––––––––––––––––––––––––––– WANTED: 2 CATERPILLAR 740B ARTIC TRUCKS LATER MODEL, MAX 5000 HOURS, USA LOCATION CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR LATE MODEL BACKHOE ASAP IN TEXAS I'M LOOKING FOR 2000-2010 COMPLETE BACKHOE ASAP! PLEASE AUCTION PRICES ONLY. I'M A DEALER WANTED: USED PORTABLE ASTEC SO NO RETAIL, I'M LOOKING TO PURASPHALT PLANT CHASE IN QTY IF THE PRICE IS RIGHT. YEAR MODEL 2000 OR NEWER ASTEC, LOOKING FOR UNITS IN THE TEXAS 300 TON PORTABLE DRUM MIX AREA IF POSSIBLE. I HAVE CASH ASPHALT PLANT - PORTABLE FIVE BIN TODAY!! NOTE: CAN BE IN WORKING COLD FEED SYSTEM - PORTABLE RAP OR NON WORKING CONDITION. SYSTEM - PORTABLE SELF-ERECTING CONTACT: MATTHEW SILO USED SURGE SYSTEM (ASPHALT (PH: 346-230-4485) SILOS) - 2 -200 TON SILOS - TRAVERSE EMAIL: SALES.AMERICANCONVEYOR - 36’ DRAG SLAT CONVEYPUMPANGEAR@GMAIL.COM OR - 100’ TRUCK SCALES –––––––––––––––––––––––––––––––– CONTACT: COLLEEN DOUTY WANTED: HITACHI EX200 AND EX400 (PH: 214-226-6867) WANTED TO BUY HITACHI EX200, EMAIL: CDOUTY@ EX200-1, EX270, EX400 AND EX400-1. OVERLANDCORPORATION.COM IF YOU HAVE ANY FOR SALE PLEASE FAX: 214-226-6867 EMAIL ME PICTURES AND DETAILS. –––––––––––––––––––––––––––––––– CONTACT: RIZ SUNESARA WANTED: NEEDED BÙLLDOZER (PH: 832-528-0786) NEEDED BULLDOZER KOMATSU EMAIL: RIZ@MEGAEQUIPMENTS.COM 275,375,475 ENC CAB WITH RIPPER FAX: 2817270415 2012 USA LOCATION MUST NE UNADVERTISED PLEASE –––––––––––––––––––––––––––––––– CONTACT: JEAN MAURICE BOUTIN WANTED: CATERPILLAR 140G, 140H (PH: 450-346-8975) RUNNING OR NON-RUNNING!!!!!! EMAIL: WANTED TO BUY CAT MOTOR GRADER JEANMAURICEBOUTIN@VIDEOTRON.CA 140G AND 140H. IF YOU HAVE ANY –––––––––––––––––––––––––––––––– FOR SALE PLEASE EMAIL ME PICWANTED: JOHN DEERE 410 BACKHOE TURES AND DETAILS. CASE 580 BACKHOE 1998 TO 2007 CONTACT: STEVE CONTACT: ROGER (PH: 713-659-0593) PH: 810-845-4540 EMAIL: STEVE@MEGAEQUIPMENTS.COM EMAIL: RSTUDLEY@COMCAST.NET FAX: 281-727-0415 FAX: 810-845-4540 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: RUNNING OR NON RUNNING WANTED: NEEDED BULLDOZER MACHINES!!!! NEEDED USA LOCATION BULLDOZER CAT WHEEL LOADER 936, 950, 950B, KOMASTU 2014 AND UP 155 275 375. 475 ENV WITH RIPPER D10N D10R D10T 950E, 950F, 966D, 966E, 966F AND 966G. IF YOU HAVE ANY FOR SALE PLEASE D11N D11R D11T ENC ÇAB WITH RIPEMAIL ME PICTURES AND DETAILS. PER OR REPOSSES BANK OR LIEN CONTACT: SAM CONTACT: JEAN MAURICE BOUTIN (PH: 713-855-6170) (PH: 1 450 346 8975) EMAIL: SALES@MEGAEQUIPMENTS.COM EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA FAX: 281-727-0415 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL 260A WANTED: INTERNATIONAL TD20C BACKHOE DOZER & INTERNATIONAL 250E ANY CONDITION LOADER CONTACT: RUDY RUNNING OR NOT, FOR PARTS! (PH: 732-921-1314) CONTACT: ALBERT HARLOW EMAIL: CRUTILITIES@GMAIL.COM (PH: 267-738-5984) –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: 2002-2005 VERMEER HG 365 GRINDER PARTS UNIT I AM LOOKING FOR A 2002-2005 VERMEER HG 365 GRINDER UNIT FOR PARTS ONLY. I HAVE A COUPLE OF UNITS I'M LOOKING TO PUT TOGETHER. I'M A SERIOUS BUYER AND LOOKING TO ACT FAST. DOESN'T MATTER WHAT'S WRONG, DON'T CARE ABOUT THE HOURS. CONTACT: JAMES (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: GP 7.5 CUBIC YARD BUCKET FOR CAT 980G/H/K WE ARE LOOKING FOR CAT 980G/H/K 7.5 CUBIC YARD GP BUCKET WITH BOE (BUCKET ONLY). OTHER MAKES OF THE SAME SIZE BUCKET ARE ACCEPTABLE. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. CONTACT: ROY FOLLICK (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: HYDRAULIC PUMP FOR 2700 Q LINK BELT CONTACT: TONY STEFFES PH: 414-651-7336 EMAIL: STEFFESANTHONY@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LINKBELT CRANES LINKBELT MODEL 48A OR LS68, LS78, LS 98, OR LS108. OPERATING OR PARTS MACHINES CONTACT: WILLIAM TAYLOR PH: 609-868-0326 EMAIL: TAYLORSCRANESERVICE@GMAIL.COM FAX: 856-468-5742 –––––––––––––––––––––––––––––––– WANTED: FORD BACKHOE 455C I AM LOOKING FOR A TECHNICIAN FAMILIAR WITH THE ENTIRE ELECTRICAL SYSTEM OF A FORD BACKHOE 455C. THE MACHINE IS LOCATED IN CONSHOHOCKEN, 19428 CONTACT: JON NEVE PH: 610-828-9869 EMAIL: JAMESJNEVEINC@GMAIL.COM FAX: 610-828-0382 –––––––––––––––––––––––––––––––– WANTED: HORIZONTAL DIRECTIONAL DRILLS I AM CURRENTLY LOOKING TO PURCHASE HDD UNITS ASAP! ANYWHERE IN THE U.S. CAN BE WORKING OR BROKEN. MUST HAVE LOW MILES AND RODS AND BASKET MUST BE IN PLACE. I WILL PAY FOR SHIPPING. MUST HAVE FULL SPECS AND PHOTOS READY. CONTACT: MATTHEW STEVENSON PH: 346-230-4485 EMAIL: MATT.TURBOWELDINGSVC@GMAIL.COM FAX: 346-230-4485 ––––––––––––––––––––––––––––––––

Page 44 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Houston, TX Tues., August 22, 2017 For: Rental Fleet Construction Equipment & more • Jamestown, NY Thurs., August 24, 2017 For: Rolloff Trucks, Containers and more • Queretaro, Mexico Fri., August 25, 2017 For: Late Model Earthmoving Equipment & more • Scranton, PA Sat., August 26, 2017 For: Job Completion: Cranes, Boom Trucks & more • Pensacola, FL Thurs., September 7, 2017 For: Late Model Construction Equipment Auction • Parkersburg, WV Sat., September 9, 2017 For: Large Late Model Construction Equipment Auction • Youngstown, OH Sat., September 16, 2017 For: Rolloff Trucks & Boxes, Dump Trucks and more • Nashville (Cookeville), TN Wed., September 20, 2017 For: Earthmoving Equipment & more • Atlantic City, NJ Sat., September 23, 2017 For: Very Late Model Rental Returns Auction • Oneida, NY Sun., September 24, 2017 For: Estate Auction • Dallas (Ft. Worth), TX Tues., September 24, 2017 For: Rentals! Construction Equipment & more • San Angelo, TX Thurs., September 28, 2017 For: Rental Returns of Late Model Earthmoving Equipment & more • Exeter, RI Fri., October 6, 2017 For: Acquisition Auction, Construction Equipment & more • Sacramento, CA Fri., October 13, 2017 For: Large Late Model Rental Return Construction Equipment • Cape Cod, MA Sat., October 14, 2017 For: Snow & Construction Equipment • Spartanburg, SC October 19 - 20, 2017 For: 2-Day Complete Liquidation Construction Equipment • Montreal, Quebec, Canada Sat., October 21, 2017

For: Rentals! Late Model Construction Equipment & more • Auburn, MA Fri., October 27, 2017 For: Late Model Construction, Ag, Snow Equipment & more • New York Sat., October 28, 2017 For: 1 Owner Retirement Paving & Construction Auction • Middletown, NY Fri., November 3, 2017 For: Job Completion Auction • Middletown, NY Sat., November 4, 2017 For: Late Model Rental Returns Construction Equipment & more • Rochester (Dansville), NY Sat., November 11, 2017 For: Late Model Municipal & Rental Return Auction • Mt. Hope, OH November 16 - 17, 2017 For: Famous Amish Forestry & Sawmill, Generator, Heavy Construction Equipment Auction • Torrington, CT Sat., November 18, 2017 For: Very Large Job Completion Construction Equipment & more • Woodstock, Ontario, Canada November 20 - 21, 2017 For: Very Late Model Agricultural Equipment & more • Buffalo, NY Sat., December 2, 2017 For: Job Completion Earthmoving Equipment & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Houston, TX August 23 - 24, 2017 • North East, MD August 29, 2017 • Williston, ND August 31, 2017 • Edmonton, AB September 6 - 8, 2017 • Atlanta, GA September 12, 2017 • Phoenix, AZ September 13, 2017 • Columbus, OH September 14, 2017 • Las Vegas, NV September 15, 2017 • Minneapolis, MN September 15, 2017 • Nashville, TN September 19, 2017 • Sacramento, CA

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com September 20, 2017 • Raleigh-Durham, NC September 21, 2017 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Portland, OR Fri., August 25, 2017 For: Monthly Public Auction • Sacramento, CA Sat., September 9, 2017 For: Monthly Public Auction • Portland, OR Fri., September 29, 2017 For: Monthly Public Auction • Sacramento, CA Fri., October 13, 2017 For: Monthly Public Auction • Portland, OR Fri., October 27, 2017 For: Monthly Public Auction • Sacramento, CA Sat., November 11, 2017 For: Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY Thurs., August 24, 2017 • ONLINE ONLY Thurs., August 31, 2017 • ONLINE ONLY Thurs., September 7, 2017 • ONLINE ONLY Thurs., September 14, 2017 • ONLINE ONLY Thurs., September 21, 2017 • ONLINE ONLY Thurs., September 28, 2017 • ONLINE ONLY Thurs., September 28, 2017 • ONLINE ONLY Thurs., October 5, 2017 • ONLINE ONLY Thurs., October 12, 2017 • ONLINE ONLY Thurs., October 19, 2017 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY August 23, 2017 • ONLINE ONLY August 30, 2017 • ONLINE ONLY September 6, 2017 • ONLINE ONLY September 13, 2017

DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540

• Philadelphia, MS September 12 - 13, 2017 For: Huge 2-Day Public Auction EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Wills Point, TX Tues., August 29, 2017 For: Absolute Heavy Equipment Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., October 20, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., December 8, 2017 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY August 30, 2017 • ONLINE ONLY September 13, 2017 • ONLINE ONLY September 27, 2017 • ONLINE ONLY October 11, 2017 • ONLINE ONLY October 25, 2017 • ONLINE ONLY November 8, 2017 • ONLINE ONLY November 29, 2017 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225 • Sebring, FL Sat., September 9, 2017 For: Construction & Agricultural • Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Rome, NY Sat., August 26, 2017 For: Public Auction • Ocala, FL Thurs., September 14, 2017 For: Public Auction JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Stanton, TX Wed., September 13, 2017 For: Permian Basin Absolute Public Auction

• Pelzer, SC Tues., September 26, 2017 For: Fall Construction Equipment/Trucks Auction • Pelzer, SC Thurs., December 7, 2017 For: Winter Construction Equipment/Trucks Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., August 24, 2017 For: Truck and Trailer Auction • ONLINE ONLY Thurs., August 31, 2017 For: Construction Equipment • ONLINE ONLY Thurs., September 7, 2017 For: Truck and Trailer Auction • ONLINE ONLY Thurs., September 7, 2017 For: Kevitt Excavating Equipment • ONLINE ONLY Thurs., September 14, 2017 For: Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., September 9, 2017 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563

JOEY MARTIN AUCTIONEERS • Geneseo, NY www.joeymartinauctioneers.com September 5 - 12, 2017 For: NetAuction 864-940-4800 • Bogart (Athens), GA Wed., August 23, 2017 For: One Owner Liquidation • Alpharetta, GA Wed., August 30, 2017 For: One Owner Complete Liquidation • Carrollton, GA Wed., September 13, 2017 For: Construction and Forestry Equipment Auction • Blairsville, GA Sat., October 21, 2017 For: Early winter Equipment Auction

• Westover, PA MARTIN & MARTIN Thurs., August 24, 2017 AUCTIONEERS, INC. For: Oldaker Salvage LLC www.mmaauction.com Complete Liquidation Auction. 864-947-7888 • Berlin Center, OH • Princeton, WV Wed., September 13, 2017 Wed., August 30, 2017 For: Complete Liquidation For: Trucks, Trailers & Equipment Becdir Construction Co.

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers WILSON’S AUCTION SALES, INC. www.wilsonsauction.com 302-422-3454 • Harrington, DE Sat., September 16, 2017 For: Mid-Atlantic Fall Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 45

Page 46 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALLU GROUP ..........................................................................................14

PRIME SOURCE .....................................................................................15

ATI CORPORATION ................................................................................16

PROFILE PUBLICATIONS ......................................................................20

BARGAINS...............................................................................................42

RANSOME EQUIPMENT SALES LLC/LRH ...........................................43

CEG SCALE MODELS ..............................................................................6

ROAD BUILDERS MACHINERY & SUPPLY.......................................5,15

CLASSIFIEDS ..........................................................................................42

SCHAEFER ENTERPRISES...................................................................14

CLOVERFIELD MACHINERY ...................................................................2

SCREEN MACHINE INDUSTRIES .........................................................39

CONSTRUCTION EQUIPMENT GUIDE

SULLIVAN PALATEK .................................................................................7

UNDERGROUND UTILITY PROMO.............................................10

TEREX CRANES .....................................................................................21

CEG WANTED ...............................................................................43 AUCTION TRIPLE BUY .................................................................45 DOOSAN PORTABLE POWER ..............................................................47 DRESSTA NORTH AMERICA .................................................................17 DYNAPAC.................................................................................................11 EVERGREEN TRACTOR LLC ................................................................38

ARIZONA SUPPLEMENT CONSTRUCTION EQUIPMENT GUIDE...................................................5 DITCH WITCH OF ARIZONA .................................................................3,7 EMPIRE MACHINERY...............................................................................5 WSM AUCTIONEERS ...............................................................................8

FAE USA INC ...........................................................................................40 FELLING TRAILERS................................................................................28 FLANGE LOCK ..........................................................................................2 FLECO ATTACHMENTS..........................................................................16

TEXAS SUPPLEMENT BANE MACHINERY.................................................................................20

FLUID CONTROL SERVICES.................................................................30

CONSTRUCTION EQUIPMENT GUIDE ................................................18

GROVE WORLDWIDE ..............................................................................9

DITCH WITCH WESTERN DEALERS....................................................11

HENDRIX MACHINERY LLC ....................................................................3

EAGER BEAVER TRAILERS ....................................................................9

HENNESSY INTERNATIONAL .................................................................2

FECON .....................................................................................................10

KCM ........................................................................................................48

GOMACO CORP .....................................................................................19

KOBELCO CONSTRUCTION MACHINERY .........................................29

HOLLAND PUMP MFG ...........................................................................10

KOMATSU AMERICA CORP ...................................................18,19,30,31

KIRBY-SMITH MACHINERY INC ..............................................................3

KPI-JCI .....................................................................................................37

LIUGONG CONSTRUCTION MACHINERY ..........................................17

LARMEE EQUIPMENT & SUPPLY.........................................................38

MCCOURT & SONS EQUIPMENT .........................................................13

LINK-BELT EXCAVATORS .................................................................24,25

ROMCO EQUIPMENT CO ........................................................................2

METSO MINERAL CRUSHING...............................................................35

SIMPSON AND SONS TRADING .............................................................3

METSO MINERALS SCREENING..........................................................41

TROPHY TRACTOR..................................................................................7

NATIONAL ATTACHMENTS....................................................................15

VERMEER OF TEXAS-LOUISIANA..........................................................5

NORAM ...............................................................................................22,23

WAUKESHA-PEARCE INDUSTRIES INC..............................................10

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 20, 2017 • Page 47

DOOSAN. AN POWERFUL W SOLUTIONS. UTIONS At Doosan, we do more than engineer products. We engineer solutions. Robust compressors that weather her the harshest conditions. Generators and light towers that match innovation with efficiency. Unrivaled service and support, day or night. That’s a the way we’ve operated for over 100 years, and the way we’ll do business for dec d ades to come.

AIR COMPRESSORS / GENERATORS / LIGHT TOWERS Air Compressor Solutions, Inc. www.acsir.com

TEXAS

Odessa (432) 335-5900

Ditch Witch of Arizona

www.ditchwitchaz.com

ARIZONA

Phoenix (602) 437-0351

Ditch Witch of Southern Arizona

www.ditchwitchaz.com

ARIZONA

Tucson (520) 579-0261

DoosanPortablePower.com | 800.633.5206

Sierra Machinery, Inc. www.sierraelpaso.com

TEXAS

El Paso (915) 772-0613

NEW MEXICO Artesia (575) 746-6592

Volvo Construction Equipment & Services www.vcesvolvo.com

CALIFORNIA

Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244

San Diego/ Lakeside (619) 441-3690 Corona (951) 277-7620

Papé Material Handling Inc.

OREGON

Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

www.papemh.com

NEVADA

Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386

Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

Page 48 • August 20, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABILENE EQUIPMENT CENTER Abilene, TX 800/382-9271 www.anhltd.com

BANE MACHINERY INC. Dallas, TX 800/594-2263 Ft. Worth, TX 800/601-2263 Tyler, TX 800/594-2200 www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK 405/917-9191 Tulsa, OK 918/835-7200 www.oklahomaterritoryequipment.com

APCO EQUIPMENT North Las Vegas, NV 800/574-4089 www.apcoequipment.com

TRI-WEST TRACTOR, INC. Livermore, CA 925/455-8200 www.tri-westtractor.com

P Promi sees Keppt

CLM EQUIPMENT CO. INC. Lafayette, LA 337/837-6693 Lake Charles, LA 337/625-5942 Baton Rouge, LA 225/677-7838 Houston, TX 281/598-2500 www.clmequipment.com

BEARD EQUIPMENT CO. Midland, TX 432/694-4530 www.beardequipco.com

KCMA Corporation | 770.499.7000 | KCMCORP.COM 2140 Barrett Park Drive,, Suite 101 | Kennesaw, GA 30144 2