Issuu

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Western Edition

www.constructionequipmentguide.com

June 11, 2017 • Vol. IX • No. 12 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Inside

Alaska Marks Anniversary of Major Feat

Colorado’s U.S. 34 Project Reaches Half-Way Mar k...10

By Lori Tobias CEG CORRESPONDENT

Changes Are Coming to Santa Barbar a Roads...19

California Department of Water Resources photo

Construction crews in California have begun demolishing the destroyed portion of the main spillway at Oroville Dam as they race to repair the structure in time for the next rainy season.

Repair Work Begins at Dam RES Begins Constr uction of Redbed Plains Wind Far m...38

Table of Contents............ 4 California Section.......19-24 Air Compressors, Generators & Light Towers Section..........39-49 Business Calendar..........56 Paving Section.......... 57-65 Auction Section........ 68-71 Advertisers Index...........72

OROVILLE, Calif. (AP) Construction crews in California have begun demolishing the destroyed portion of the main spillway at Oroville Dam as they race to repair the structure in time for the next rainy season, state water officials and construction managers said. Using heavy equipment and explosives, crews were clearing away sections of concrete and rebar that have not already washed away. They hope to begin pouring fresh concrete in June, starting from the bottom of the 3,000-ft. chute and working their way up. see SPILLWAY page 20

California Department of Water Resources photo

Using heavy equipment and explosives, crews were clearing away sections of concrete and rebar that have not already washed away.

This year marks the 75th anniversary of the Alaska Highway, an engineering marvel that some doubted could be done, and one military officer likened to the biggest and hardest construction job since the Panama Canal. Events are planned throughout the year in both Alaska and Canada to celebrate the feat. But the highway is noted for another milestone in history — the beginning of the end of segregation in the United States military. “This was built primarily by African American regiments, said Casey Woster, architectural historian for Colorado State University’s Center for Environment Management of Military Lands. “At that time, the military was segregated. Their efforts are a huge part of why the military was desegregated.” In 1941 as WWII raged, Alaska was identified as a particularly vulnerable spot and the government knew defenses had to be improved. They looked at several options for building an overland road — including one on the west side of the Rockies and one on the east — the path they ultimately chose. It was during the onset of the Lend Lease Act, a move that allowed the United States to sell, lease, or transfer arms and supplies to any see ALASKA page 18

John Deere Plans to Acquire Wirtgen Group Deere & Company has signed a definitive agreement to acquire the Wirtgen Group, a privately-held international company that is leading manufacturer worldwide of road construction equipment.

The purchase price for the equity is $4.88 billion (EUR 4.357 billion) in an all-cash transaction. The total transaction value is approximately $5.2 billion (EUR 4.6 billion) based on current exchange

rates, including the assumption of net debt and other consideration. The Wirtgen Group had sales of $2.91 billion (EUR 2.6 billion) in the year ending Dec. 31, 2016. Deere expects the transaction to be

accretive to earnings per share and currently expects to fund the acquisition from a combination of cash and new equipment operations debt financing. Detailed financial see DEERE page 38

Page 2 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 3

"In Business for over 33 Years" 2012 John Deere 310J, Stk#: 10678, EROPS, A/C, 4WD, 4,744 hrs., 36" QC Bkt, Extendahoe, Aux. Hyd., Pilot Controls, 305 / 70Dx16.5 Front Tires, 19.5x24 Rear Tires...................... $39,500

www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2016 Dynapac CA1500D, Stk#: 10637, EROPS,

Se Habla A/C, 66" Smooth Drum, 4 hrs., Automatic Español Vibration Control, 100hp, Luxury Comfort Cab,

14.9x24 Tires, 4 Cyl. Deutz Eng.............$86,500

2011 John Deere 650J LGP, Stk#: 10712, 2012 Volvo SD100, Stk#: 10737, 84" Smooth OROPS, 6 Way Blade, 2,652 hrs., 80% U/C, 5 Pucket 3 Shank JD Ripper, 24" Pads, 10' 6" Wide Drum w/Pad Drum Shell Kit, 1,707 hrs., .............................................................. $66,500 23.1x26R3 Tires, 4 Cyl. Cummins Eng.. $59,500

Cat PA56 E00100E, Stk#: 9202, Winch with fair leads for D6T........................................ $16,500

2012 John Deere 310J, Stk#: 10683, OROPS, 4WD, 3,138 hrs., 24" Quick Connect Bucket, Extendahoe, Aux. Hyd., Pilot Controls, 12x16.5 Front Tires, 19.5Lx24 Front Tires.......... $36,500

OEM Tracks, Stk#: 9762, New Original Excavator Tracks: 28” Pad, 49 Links, 190MM Pitch, Cat, Komatsu, Hitachi, Volvo, Kobelco, Case, Linkbelt and Others........................ $7,500

1997 John Deere 310E, Stk#: 10727, OROPS, 2 WD, 5,693 hrs., 24" Bucket, Aux. Hyd., 2 Stick Controls, 11Lx16 Front Tires, 19.5Lx24R4 Rear Tires...................................................... $18,500

2011 JLG G9-43A, Stk#: 10687, 9,000 lbs., 43 ft., 6,247 hrs., 60" Forks, 74" Frame, Aux. Hyd., 13.00x24 Rubber Tires, 4 Cyl. Cummins Eng...... .............................................................. $36,500

2007 John Deere 650J LGP, Stk#: 10611, OROPS, Eng. Encl., Rear Screen, 6 Way Blade, 2006 Cat D4G XL, Stk#: 10622, OROPS, Eng. 4,738 hrs., 28" Pads, 80% U/C, 10'4" Wide........ Encl., 6 Way Blade, 1,636 hrs., 70% U/C, 18" .............................................................. $49,500 Pads, 8' 9" Wide.................................... $34,500

1982 John Deere 670A, Stk#: 10700, EROPS, 4,638 hrs., 14 ft. M/B, Front Scarifier, 14.00x24 Tires, 6 Cyl. JD Eng............................... $21,500

2015 Big Tex Dump, Stk#: 10249, 25,900 lbs. GVWR, Net Pay Load 17,340 lbs., 48" Spread Axle, 2007 JLG 450A II, Stk#: 10635, 500 lbs., 45 ft., 20 ft. L / 4 ft. Walls, 7' 9" W, Folding Rear Gate 2,390 hrs., 33x15.50-16.5 Tires, 3 Cyl. Deutz w/Heavy Duty Ramps, D Rings Inside Trailer, ST235/85R16 Ries, Front Tool Box.......... $14,500 Eng.........................................................$21,500

1999 Sterling, L85, Stk#: 10521, A/C, 331,769 Miles, 11Rx24.5 Tires............................ $33,500

2006 John Deere 700J XLT, Stk#: 10716, EROPS, A/C & Heat, Eng. Encl., 6 Way Blade, 9,562 hrs., 70% U/C, 22" Pads, 10 ft. Wide...............$69,500

2012 John Deere 850K LT, Stk#: 10684, EROPS, A/C, FM Stereo, 6 Way Blade, 3,830 hrs., 23" Pads, JD Ripper, Draw Bar, 24" Pads, 12' 2' Wide.................................................... $146,500

2012 Cat D4K II XL, Stk#: 10742, EROPS, A/C, FM Stereo, Sweeps, Rear Screen, 6 Way Blade, Komatsu D39PX-21A, Stk#: 10760, EROPS, A/C, Sweeps, Rear Screen, 6 Way Blade, 5,091 hrs., 3,953 hrs., 18" Tracks, 70% U/C, Ripper No.3, Cat C4.4 ACERT Eng., 9' 6" Wide.......... $66,500 25" Pads, 10 ft. Wide............................ $39,500

2011 Doosan G25E-5, Stk#: 10455, 4,600 lbs., 7 ft., 42" Forks, 45" Frame, 5,681 hrs., 7.00x15 Front and 6.50x10 Rear Hard Rubber Tires, Doosan DOHC, 16V Gas Eng................. $14,500

2015 Dynapac CA2500D, Stk#: 10716, EROPS, A/C, 798 hrs., 84" Smooth Drum, Automatic Vibation Control, 550/60-22.5 Tires, Cummins Eng........................................................ $79,500

2006 JLG 400S, Stk#: 10288, 1,000 lbs., 40 ft., 2,617 hrs., 4WD, Vortec 4 Cyl. Gas Eng.$18,500

2014 Cat 246D, Stk#: 10639, EROPS, A/C, 312 hrs., 73" Bucket, Aux. Hyd., 12x16.5 Tires, 4 Cyl. Cat Eng........................................... $39,500

2014 John Deere 35D, Stk#: 10421, EROPS, A/C & Heat, 1,671 hrs., 12" Bucket, Front Blade, Aux. Hyd., 12" Rubber Tracks, Quick Coupler, 3 Cyl. YanMar Eng................................... $36,500

2005 Skytrack 6042, Stk#: 10682, 6,000 lbs., 42 ft., 4WD, 3,444 hrs., 48" Forks, 52" Frame, Aux. Hyd., 13.00x24 Foam Filled Tires, 4 Cyl. Cummins Eng....................................... $32,500

2005 JLG 800S, Stk#: 10709, 1,000 lbs., 80 ft., 1,909 hrs., 15x625 Tires, 4 Cyl. Deutz Eng......... .............................................................. $49,500

2011 Cat D6T XL, Stk#: HR-574, EROPS, A/C, Semi U Tilt Blade, 4,213 hrs., 24" Pads, 10' 7" Wide.................................................... $159,500

2014 Terex TC75, Stk#: 10763, EROPS, 956 hrs., 73 hp., 18" Quick Connect Bucket, Aux. Hyd., 18" Rubber Tracks, 91" Push Blade, 4 Cyl. Deutz Eng.............................................. $52,500

2015 Linkbelt 130LX3, HR-532, Stk#: EROPS, A/C, 1,674 hrs., 36" Digging Bucket, 24" Semi 2011 Komatsu D65PX-16, Stk#: HR-658, Triple Grouser Tracks, 15' 2" Boom, 8' 2" EROPS, A/C, Heat, 3,995 hrs., Straight Blade w/ Standard Arm, Rear View Camera, 8' 6" Wide, 4 Tilt, Engine Enclosures........................ $119,500 Cyl. Izuzu Eng....................................... $89,500

2012 Linkbelt 130LX, Stk#: 10768, EROPS, A/C, 5,594 hrs., 36" Bucket w/Hyd. Thumb, 24" Pads, 4 Cyl. Izuzu Eng., 8' 8" Wide..................$49,500

2010 Ditch Witch RT45, Stk#: 10660, 813 hrs., 12" Trench, Slide Boom, 64" 6 Way Blade, 26 / 1200x12 Tires, 3 Cyl. Deutz Eng........... $18,500

2013 John Deere 850K WLT, Stk#: HR-745, EROPS, A/C & Heat, FM Stereo, 6 Way Blade, 5,764 hrs., Vall Ripper, 30" Pads, 13 ft. Wide...... ............................................................ $139,500

2008 Skytrak 10054, Stk#: 10707, 10,000 lbs., 2013 John Deere 17DX, Stk#: 10686, OROPS, 54 ft., 4WD, 3,544 hrs., 72" Forks, 62" Frame, 14x24 Tires, 4 Cyl. Cummins Eng......... $59,500 1,071 hrs., Aux. Hyd., Front Blade........ $19,500

2016 Kobelco SK210LC-9, Stk# HR-701, EROPS, A/C, FM Stereo, 14 hrs., 42" Bucket, 10'6" Wide, 32" Pads.......................... $146,500

1997 Case 580L, Stk#: 10711, OROPS, 2 WD, 5,297 hrs., 24" Bucket, 3 Stick Controls, 11Lx16.5L-F-3 Front Tires, 19.5Lx24 Rear Tires, 4 Cyl. Case Eng..................................... $17,500

Page 4 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

WESTERN EDITION Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

10 U.S. 34 RECONSTRUCTION IN COLORADO HITS HALFWAY MARK The significant amount of work done in the Big Thompson Canyon since last October when U.S. 34 closed to through traffic means the project is not only halfway done, but that the Colorado Department of Transportation and Kiewit Infrastructure Co. reopened the highway to all traffic on May 25.

10 OKLAHOMA’S AVERY DRIVE: THE LONG ROAD TO COMPLETION Cyrus Avery called it his favorite road. To some, it was “the road to nowhere.’’ Still others felt it should never have been built.

12 TAXES, BOND PROPOSALS WOULD INVEST $1.1B IN OKLAHOMA CITY More than $1.1 billion in funding for streets, police, firefighters and other basic needs and an annual injection of $26 million for day-to-day operations are included in sales tax and bond proposals under consideration by the Oklahoma City Council.

14 KIRBY-SMITH ANNOUNCES HIRING OF BAILEY AS VEEP, CRANE DIVISION Kirby-Smith Machinery Inc., an equipment distributor and Manitowoc certified elite dealer, has announced the hiring of Rickey Bailey as vice president, crane division.

14 HAWAII DOT CUTS ENERGY USAGE IN HALF

19 Transportation Commission to construct new express toll lanes on the I-15 freeway.

44 DOOSAN PORTABLE POWER LSC LIGHT TOWERS WORK FOR ROAD ILLUMINATION

30 FLASKA JCB EXPANDS SERVICE WITH SECOND DEALERSHIP IN DENVER, COLO.

44 WACKER NEUSON’S LIGHT TOWERS ADD BIG

Flaska JCB, headquartered in Phoenix, Ariz., has expanded to include another JCB-dedicated dealership in Denver, Colo.

30 REDEVELOPMENT OF HISTORIC MOTEL IN

BENEFITS IN SMALL PACKAGE

45 ALLMAND EXPANDS INTO MOBILE MARKET, INTRODUCES MAXI-POWER GENERATORS

ALBUQUERQUE TO BEGIN SOON Albuquerque-based Construct Southwest was selected last July by the city of Albuquerque to bring the De Anza Motor Lodge back to life. The property has sat vacant for years.

50 RITCHIE BROS. COMPLETES ACQUISITION OF IRONPLANET Ritchie Bros. has completed its acquisition of IronPlanet. Ritchie Bros. acquired IronPlanet for approximately $758.5 million, subject to customary closing adjustments.

46 RENTAL STORE SHEDS LIGHT ON BREAST CANCER AWARENESS

48 A HISTORY OF CHICAGO PNEUMATIC DURING WWII

49 SULLAIR’S POWER STRIPE OFFERS NEW LOOK, BRAND PROMISE

AT 11 AIRPORTS The Hawaii Department of Transportation (HDOT) has entered the second phase of its energy savings performance contract with Johnson Controls to provide high-efficiency lighting at 11 Hawaii airports and solar photovoltaic systems at Honolulu International Airport.

19 CHANGES COMING TO SANTA

AIR COMPRESSORS, GENERATORS & LIGHT TOWERS SECTION

BARBARA ROADS Workers are building two new highway overcrossings as part of California’s $60 million Highway 101, Linden and Casitas Pass Project that includes local circulation improvements and key bridge replacements in preparation for future Highway 101 widening.

23 SKANSKA, AMES TO BUILD CALIFORNIA’S I-15 EXPRESS LANES

Edwin M. McKeon Sr. Dennis Hogeboom Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon

43 ATLAS COPCO UNVEILS COMPLETE HILIGHT

Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Facebook

Twitter

TOWER RANGE

57 WIRTGEN TCM 180i Texture Curing Machine 58 WACKER NEUSON Tandem, Combination Rollers

Kent Hogeboom

Dennis Hogeboom

Patrick Kiel

Debbie Hansen

National Sales Manager

• Colorado• Louisiana • Oklahoma • Texas • New Mexico

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

602/679-8759 e-mail dennishogeboom@cegltd.com

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

www.constructionequipmentguide.com

Mobile

EQUIPMENT

RP12000 E PORTABLE GENERATORS

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

56 BUSINESS CALENDAR 66 CLASSIFIEDS 68 COMING AUCTIONS

42 CATERPILLAR EXPANDS LINE WITH ITS NEW

Skanska announced its joint venture with Ames Construction has been awarded a $243.9 million design-build contract from the Riverside County Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.

DEPARTMENTS

YouTube

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

702/239-0348 e-mail dhansen@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 5

> ÊÕ

> ÕÃ ÃÊÌ `>Þ `> >Þ ÞttÊ ÀÀÞ Þ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

www ww w.R .RBused.com

Celeb brating tiing g our 30th Yea Year!!

2012 KOMATSU D51EX-22, #82389, CAB/AC | PAT BLADE | RIPPER | KOMTRAX | 1,500 HRS.... .............................................................. $184,500

2014 KOMATSU D51PXI-22, #82902, INTELLIGENT MACHINE | CAB/AC | 28" TRACKS | TOPCON 915SS ANTENNA | 2,100 HRS.............. $199,750

2015 KOMATSU PC138US LC-10, #82928, CAB/AC | QC | ROAD LINERS | 8'2" ARM | AUX HYD'S | 1,100 HRS................................$169,500

2006 KOMATSU HM300-1, #92481, CAB | TAILGATE | 8,400 HRS............................ $99,500

2006 KOMATSU HM400-1, #80674, CAB/AC | HEATED BED | TAILGATE | 7,600 HRS.. $269,500

2011 KOMATSU HM400-2, #81725, 40-TON TRUCK | CAB/AC | TAILGATE | KOMTRAX | 6,800 HRS........................................................$239,700

2001 KOMATSU HM400-1, #80336, CAB/AC | TAILGATE | 6,900 HRS.......................... $199,800

2007 KOMATSU WA150-5, #82343, CAB/AC | GP BUCKET | 17.5-25 TIRES | 5,400 HRS.... $74,500

2004 KOMATSU WA250-5, #82198, CAB/AC | QC | BUCKET | 4,200 HRS............................ $87,500

2014 KOMATSU WA320-7, #82327, CAB/AC | QC/BUCKET | KOMTRAX | REAR CAMERA | 800 HRS........................................................$164,500

2007 KOMATSU WA500-6, #81625, CAB/AC | 29.5-25 TIRES | KOMTRAX | 8,500 HRS.............. .............................................................. $229,500

Page 6 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WITHH THEE RIGHT TOOLS TO INVEST STT,, YOU CANN PUT THEE RIGHT TOOLS TO WORK. Volvo olv Financial Services offers 0% for 24-months on select Volv Volvo D-Series excavators and G-Series wheel loaders. Low-interest rates and high-quality equipment create the perfect combination for your business. Contact your local V Volv olvo dealer today to get the right tools for you. Final approved transaction terms are subject to standard VFS credit underwriting guidelines and advance policy. VFS reserves the right to amend or cancel the program at any time without notice. Approvals will state the program terms and any other conditions deemed appropriate by VFS.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 7

ARIZONA Bejac Corporation p www.bejac.com b j PHOENIX (800) 77-BEJAC CALIFORNIA Bejac Corporation p www.bejac.com b j PLACENTIA (800) 77-BEJAC SACRAMENTO (800) 77-BEJAC 77 BEJAC REDDING (800) 77-BEJAC

SAN FRANCISCO (800) 77-BEJAC FRESNO (800) 77-BEJAC 77 BEJAC SAN DIEGO (800) 77-BEJAC

COLORADO Power Screening, g, LLC www.powerscreening.com i HENDERSON (800) 231-5005 MONT TAN ANA Westate Machinery www.westate.com t t BILLINGS 406-373-6010 (800) 999-6676 NEV VAD V AD ADA Liebherr Mining Equipment www.liebherr.us li bh ELKO (775) 738-7386 Bejac Corporation p www.bejac.com b j RENO (800) 77-BEJAC NEW MEXICO Nueces Power Equipment www.nuecespower.com (888) 398-9806 Power Screening, g, LLC www.powerscreening.com i ALBUQUERQUE (505) 345-4467 OREGON Orion Equipment q p www.orion-equip.com i i SEA ATTLE TTLE (800) 280-8124 TEXAS Nueces Power Equipment www.nuecespower.com EDINBURG CORPUS CHRISTI (888) 810-5134 (361) 289-0066 EL LP PASO VICTORIA (888) 645-5479 (361) 433-0672 SAN ANTONIO LAREDO (210) 807-8216 (888) 409-5662 HOUSTON SAN BENITO (713) 481-4718 (888) 810-5134 BANE Machinery y Inc. www.banemachinery.com/ banemachinery co TYLER DALLAS (903) 597-6641 (214) 352- 2468 FT WORTH (817) 847-5894 UT TAH AH Power Equipment q p Company www.power-equip.com power equip com WEST JORDAN (801) 280-4105 WASHINGTON Orion Equipment q p www.orion-equip.com i i SEA ATTLE TTLE & V VANCOUVER ANCOUVER (800) 280-8124 WYOMING Power Equipment q p Company www.power-equip.com i CASPER (800) 883-9275

Page 8 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 40H Excavator w/green bucket, 1:50 Scale - $235

Tadano ATF 160G-5 All Terrain Crane, 1:50 Scale - $215

Caterpillar D400 Articulated Dump Truck, 1:50 Scale - $175

Volvo G690C Motor Grader, 1:50 Scale - $150

JCB 535-140 HiViz Telehandler, 1:50 Scale - $145

Terex TLB890 Backhoe/Loader, 1:50 Scale - $140

Allis Chalmers HD-21 Orange Dozer, 1:50 Scale - $130

Volvo L35G Wheel Loader, 1:50 Scale - $120

Liebherr LR632 Crawler Loader, 1:50 Scale - $120

Case 850C Angle/Tilt Dozer, 1:35 Scale - $100

Case 850B Angle/Tilt Dozer, 1:35 Scale - $100

Komatsu WA600 Wheel Loader, 1:50 Scale - $110

Mack Red,White & Blue Mixer Truck, 1:34 Scale - $100

Mack Red,White & Blue Dump Truck, 1:34 Scale - $100

Caterpillar 225 Crawler Crane w/Clamshell Bucket, 1:50 Scale - $75

Bobcat/Melroe 50th Anniversary Gold Skid Steer Loader, 1:25 Scale - $30

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 9

Contact your local dealer: POWER EQUIPMENT COMPANY www.power-equip.com

Denver, CO 303-288-6801 Fax: 303-288-6809

Grand Junction, CO 970-243-0722 Fax: 970-243-0726

Colorado Springs, CO 719-392-1155 Fax: 719-390-9604

Johnstown, CO 970-669-6209 Fax: 970-669-6280

ARNOLD MACHINERY CO. www.arnoldmachinery.com

Salt Lake City, UT Sparks, NV 801-972-4000 Fax: 801-975-9434

775-356-1511 Fax: 775-356-0517

Idaho Falls, ID

Las Vegas, NV

208-523-0822 Fax: 208-523-9918

702-642-9000 Fax: 702-642-8808

Meridian, ID

Phoenix, AZ

208-887-6000 Fax: 208-887-6013

602-414-1900 Fax: 602-414-1904

Twin Falls, ID

Tucson, AZ

208-733-1715 Fax: 208-734-6924

520-294-7677 Fax: 520-294-7670

SIERRA MACHINERY, INC. www.sierraelpaso.com

El Paso, TX

Artesia, NM

915-772-0613 Fax: 915-772-1964

575-746-6592

ROMCO EQUIPMENT CO. www.romco.com

Austin

Houston

Round Rock, TX 512-388-2529 877-851-1026 Fax: 512-388-1781

Houston, TX 713-937-3005 800-865-6998 Fax: 713-937-7541

Buffalo

Longview

Buffalo, TX 903-322-5602 Fax: 903-322-5605

Longview, TX 903-758-5576 Fax: 903-758-3079

Carmine

Rio Grande Valley

Carmine, TX 979-278-3570 Fax: 979-278-3573

Dallas Dallas, TX 214-819-4100 800-227-6626 Fax: 214-819-4102

Ft. Worth Ft. Worth, TX 817-626-2288 866-966-4602 Fax: 817-626-8983

Mercedes, TX 956-565-0100 Fax: 956-565-1765

San Antonio San Antonio, TX 210-648-4600 800-966-4601 Fax: 210-648-1282

ROL Remote Oilfield Location Three Rivers, TX 361-254-2317

PACWEST MACHINERY www.PacWestMachinery.com

Spokane, WA

Eugene, OR

509-534-5933

541-302-3762

Portland, OR

Kent, WA

503-252-5933

206-762-5933

Some co ompanies have you choose power or fuel efficiency. Yo ou chose e both.

Volvo olv developed the industry’s first fuel efficiency guarantee so you never haavve to compromise on n performance or productivity. And with CareT Trrack machine monitoring, you caan focus your attention on more important things — like growing your business. Get the details at volvoce.com/smartfuel.

Page 10 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Oklahoma’s Avery Drive: The Long Road to Completion Debbie Jackson TULSA WORLD

TULSA, Okla. (AP) Cyrus Avery called it his favorite road. To some, it was “the road to nowhere.’’ Still others felt it should never have been built. Since 1958, the 3.5-mi., two-lane scenic byway has been known as Avery Drive, named for the man most remembered as the father of the Mother Road, Historic Route 66. It runs from West 21st Street near Chandler Park to Oklahoma 97 in south Sand Springs. “Idyllic Avery Drive, a hilly, winding riverside road embraced by dense woods and foliage,’’ is how Tulsa World reporter Manny Gamallo described it in 1990. “To one side is a steep slope broken by occasional rocky bluffs and inviting trails. On the other side, breaks in the trees offer glimpses of a quietly flowing Arkansas River.’’ The road is popular with bicyclists and rock-climbing enthusiasts. The Tulsa World reported that it has been plagued by numerous landslides and shifting pavement, making it one of Tulsa County’s costliest stretches of road to maintain. In 1990, then-Tulsa County Commissioner John Selph said Avery Drive

should never have been built because of unstable rock formations beneath it, but it will never be shut down. One of the earliest historical accounts of the area was by physician and naturalist Samuel Washington Woodhouse, who accompanied the U.S. Army Corps of Topographical Engineers in 1849 when they were surveying the boundaries of the Creek Nation in Indian Territory. While camped along the Arkansas River with the surveyors, Woodhouse kept a diary in which he sketched the weathered limestone formation, known locally as Lost City, on the south side of the river. Avery said the term “Lost City’’ came from the fact that the massive cliffs looked like buildings. “In the old days, outlaw gangs used the rocks as a hideout,’’ Avery told The Tulsa Tribune in 1956. He said early settlers in wagons had worn trails on either side of the river that were later acquired by the railroads. “When Red Fork was a pretty good cow town and before Tulsa was thought of, travelers used to ferry across the river and take the trails on which the Frisco and Katy railroads are now built,’’ Avery said. Avery was a Tulsa County commissioner

when he began building what was then known as the River Road to link Sand Springs and Tulsa. He brought convicts from the Oklahoma State Penitentiary to begin construction in 1914. They started on the Tulsa end only to be blocked by a rock quarry, and work halted in 1915. Avery left office in 1916, and his successor abandoned the project. For a period, he said, the governor referred to it as the “Whiskey Road’’ because so many Tulsans traveled the route to Keystone for liquor. But Avery didn’t give up. Twenty years later, he resumed work using labor provided by the Works Progress Administration, a New Deal agency that employed millions of people during the Great Depression. This time, he started on the Sand Springs end. Again, work halted over right-of-way issues at the site of the quarry where a large stone-crusher operated. “The road to nowhere,’’ as the Tribune branded the project, was tied up in court for decades because the quarry owner and Tulsa County could not agree on the value of the land. Finally, 40 years after construction started, the two sides reached agreement and 85year-old Cyrus Avery got to see his dream road completed in 1956.

But problems were not over for the scenic road. From 1972 until the early ‘80s, the old rock quarry was used as a landfill, accepting all manner of solid, liquid and sludge waste, including jet fuel, acids, caustics and solvents. In 1973, World reporter Ralph Marler and photographer J.R. Jones visited Avery Drive after the county closed it due to dangerous cracks in the pavement. Torrents of discolored, foamy water cascaded from the landfill site and seeped into the road base, acting as a lubricant, Marler reported, and causing part of the road to slide downhill toward the Frisco tracks and the river. The Environmental Protection Agency in 1988 designated the area as the Compass Industries Superfund site. The EPA completed its cleanup of the site in 1991, delisted it in 2002 and continues monitoring it. In 2011, Tulsa County laid a fresh coat of asphalt on Avery Drive, at a cost of $700,000. “I fully expect it to settle again,’’ said county engineer Tom Rains, “but this fix will hold for a while.’’ (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

U.S. 34 Reconstruction in Colorado Hits Halfway Mark The significant amount of work done in the Big Thompson Canyon since last October when U.S. 34 closed to through traffic means the project is not only halfway done, but that the Colorado Department of Transportation and Kiewit Infrastructure Co. reopened the highway to all traffic on May 25. The highway will remain open to all traffic this summer and close again in early October. “We have remained focused on opening the roadway before the Memorial Day holiday, so to be able to do that and at the same time say we’re halfway there makes this even more significant,” said James Usher, CDOT project director. Since closing the canyon in midOctober, Kiewit has blasted and hauled approximately 380,000 cu. yds. of rock — the same volume as nearly 20,000 concrete mixer trucks. Work also has started at the Horseshoe bridge structure near mile point 78 east of Drake, where the roadway is being realigned to cut through the mountain farther away from the river.

would like to focus on the good ahead and put the past behind, so we are looking forward to having U.S. 34 open all summer to come and go as we please,” said Laura Emerson, Big Thompson Canyon resident.

U.S. 34 Big Thompson Canyon’s roads and bridges were heavily damaged during the 2013 floods.

Despite these gains, project officials are quick to point out that a significant amount of road and river work still needs to be done — including difficult reconstruction work in the space-constrained area known as the “Narrows” on the east end of the canyon. This work will be done during the next clo-

sure scheduled for October 2017 through May 2018. Most of the roadway reconstruction will be finished a year from now, but asphalt paving and milling operations will continue throughout the canyon in the summer of 2018 with minor and intermittent traffic impacts next summer. Project completion

is scheduled for December 2018. For now, though, the focus is on letting people know U.S. 34 is again open for travel between Loveland and Estes Park. “It was a long seven months for residents of the canyon and surrounding towns. When something like this closure ends, most of us

Project Background U.S. 34 Big Thompson Canyon’s roads and bridges were heavily damaged during the 2013 floods with many homes damaged and more than 100 air lifted evacuations. The canyon and its residents also suffered from flooding in 1976. As a result of these two events, CDOT studied the hydraulic flow of the river in the canyon and its impact on the road and bridges along its path while looking for safety improvements and resiliency solutions to prevent/ protect against future flood events. For more information, visit www.codot.gov. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 11

S GHT S olutions

After more than a century of listening to customers, we understand what you need on the job. And we deliver it with every durable, reliable Chicago Pneumatic product we make. See the full range at cp.com

Machine g Monitorin

Handheld Pneumatic & Hydraulic Tools

Light Towers & Generators

Compaction Equipment

. k s i R e c Redu e Uptime. Increas

Rig-Mounted Equipment

PEOPLE. PASSION. PERFORMANCE.

Colorado Springs, CO Fort Collins, CO Frederick, CO Pueblo West, CO

www.

Albuquerque, NM Farmington, NM Hobbs, NM El Paso, TX

4RiversEquipment ent .com

Page 12 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Taxes, Bond Proposals Would Invest $1.1B in Oklahoma City More than $1.1 billion in funding for streets, police, firefighters and other basic needs and an annual injection of $26 million for day-to-day operations are included in sales tax and bond proposals under consideration by the Oklahoma City Council. There are three basic components: a permanent .25 cent sales tax and temporary .75 cent sales tax to replace the expiring MAPS 3 sales tax, and a general obligation bond package to succeed the almost-complete 2007 bond program. The Council set a public hearing on the proposals for June 13, with a Council vote June 20. Pending approval by the Council, a vote for all Oklahoma City voters would follow on Sept. 12.

General Obligation Bond Package The largest component is a $967 million general obligation bond package, which uses property tax revenue to fund basic infrastructure needs. The package would succeed the $835.5 million package approved in 2007, which is almost complete. More than half the funds — about $491 million — are dedicated to building and rebuilding streets across Oklahoma City, including sidewalk and bike lane projects. Streets are perennially a top concern among Oklahoma City residents, which is reflected in the size of the investment included in the bond package. An additional $28 million for traffic control and $27 million for bridges is also included.

A proposed investment of about $138 million for parks and recreation facilities includes new parks and improvements to regional and neighborhood parks across the city. Also proposed is $62 million for drainage control, $60 million in economic and community development funding, $45 million for firefighting facilities and $31 million for police facilities. Rounding out the proposed bond package is $24 million for libraries, $20 million for transit, $20 million for the Civic Center complex, $13 million for city maintenance facilities and $9 million for the downtown arena. Under the proposal, the city millage rate for property taxes would remain the same as it has since the 1980s. Permanent .25 Cent Sales Tax The MAPS 3 penny sales tax expires at the end of the year. Under this proposal, as of Jan. 1, .25 of the expiring penny would be permanently reinvested in the city’s general fund. About two thirds of the general fund goes to public safety services, with the rest paying for other basic services like animal control, parks and transit. Included in the proposal is a statement of intent from the Council to use the funds to pay for hiring additional police officers, staffing two additional fire stations and bringing an idled fire engine back into service. The funds would also allow the Council to reverse the cutbacks to other critical services included in recent budgets. The permanent .25 cent sales tax would add an estimated $26 million per year to the general fund. Because it would replace part of an expiring tax, the city’s sales tax rate wouldn’t go up from the rate it has been since the early 1990s. Temporary .75 Cent Sales Tax The final component would replace the rest of the expiring MAPS 3 sales tax with a temporary .75 cent sales tax to help continue catching up on a complete and safe street network for all Oklahoma City residents. Over 27 months, the temporary sales tax is projected to generate $180 million in revenue for better and safer streets, sidewalks and trails for drivers, pedestrians and cyclists. The proposal calls for $126 million for street resurfacing, plus $18 million for streetscapes, $9 million for trails, $9 million for bicycle infrastructure and $18 million for sidewalks. The debt-free projects will create smooth and safe streets for drivers, on-street amenities for recreational and commuting cyclists, and streetscapes that protect pedestrians and enhance opportunities for economic development. Like the proposed permanent .25 cent sales tax, the .75 cent temporary sales tax would replace part of an expiring tax. Oklahoma City’s sales tax rate wouldn’t go up from where it has been since the early 1990s. Sept. 12 Vote Proposed The Council is scheduled to vote on the proposals June 20, including to set a proposed election date of Sept. 12. All Oklahoma City voters would be eligible to participate in the election. The proposals will be presented on the ballot separately: One item for the .25 cent permanent sales tax, one item for the .75 cent temporary sales tax, and one item for each of the bond projects. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 13

$245,000 FOB RENO (5) CAT 631Gs, Brand New Bridgestone Drive Tires, A/C, Retarder, Clean Units Ready for Work, All Units Almost Identical Cond, Very Nice Tractors...$245,000 EACH

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • • • • •

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available

All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

$388,000 EACH - REDUCED!!! (2) 2015 VOLVO A40Gs, only 865 hrs working time, 900 hrs idle time, warranty, like new condition!

$344,900 REDUCED!!! (2) 2016 CAT 730C2s, big rubber, tailgates, like new, 600 hrs!

$309,000 - REDUCED!!!

$219,500 EACH

2015 VOLVO A30G, only 208 hrs working time! Big rubber, warranty, 1,394 idle hrs, like new cond.

(3) 2006 CAT 773E’s, High Idle Time, Extensive History, VERY GOOD CONDITION

$284,900 UNUSED 2017 HITACHI ZX350LC-6, S/N:HCMDDQ50L00080149, hyd Q/C bkt, aux hyd, shearpiping, camera

$349,900 EACH

$174,900 EACH - REDUCED!!!

$255,000 EACH

(2) UNUSED 2016 CAT 314ELCRs, full specs

(4) UNUSED 2016 CAT 336FLs, full spec!

(2) UNUSED 2016 CAT 950Ms, well spec’d units.

Page 14 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hawaii DOT Cuts Energy Usage in Half at 11 Airports The Hawaii Department of Transportation (HDOT) has entered the second phase of its energy savings performance contract with Johnson Controls to provide high-efficiency lighting at 11 Hawaii airports and solar photovoltaic systems at Honolulu International Airport. The total guaranteed energy savings at Hawaii’s airports is more than $606 million over a 15-year period with the addition of Phase 2. Phase 2 of the contract guarantees $65.5 million in energy savings through the replacement and retrofit of 47,747 existing florescent lamps to light emitting diode (LED) lamps, the application of high-end trim to 8,256 LED fixtures — which customizes the light level for an area in order to prevent using more energy than is necessary — and the installation of 15,683 photovoltaic roof-mounted panels including parking lot canopy systems at the Honolulu International Airport capable of producing 5.3 megawatts of power. Phase 1 and Phase 2 will install more than 98,000 light fixtures and more than 24,400 photovoltaic panels for a total of nearly 8 megawatts of energy savings and power generation. “This initiative’s unprecedented energy and cost savings confirms that going green is good for our local economy. The cost-effec-

tive investments are cutting energy demand and increasing efficiency, which contributes to the reduction of the state’s dependence on fossil fuels. This is an important part of reaching our long-term energy sustainability goals,” said Gov. David Ige. “Installing photovoltaic to help meet the energy needs at the state’s largest airport makes sense,” said Ford Fuchigami, HDOT director. “We are continuing to transform our transportation infrastructure to advance the state’s sustainability and energy efficiency goals.” This initiative aligns with Ige’s Hawaii Clean Energy Initiative sustainability goals and makes a significant contribution to energy efficiency and economic value by further reducing energy usage at state airports by nearly 63 million kilowatt hours per year over the 15-year performance period. That energy savings is equivalent to powering 9,264 homes a year. Over the life of the project the energy saved could power more than 175,000 homes. Construction to implement Phase 2 is scheduled to take place over the next 24 months and is financed by realized energy savings, not taxpayer money. The construction will not impact flight schedules or operations.

Johnson Controls also is working on energy savings performance contracts to improve efficiency for the highways and harbors divisions within HDOT. The total amount of guaranteed savings for airports, highways and harbors divisions projects is more than $776 million over the life of the contracts. Hawaii’s commitment to sustainability is evident in recognition by the Energy Services Coalition (ESC) that the Department of Transportation, Airports Division, performance contract for nearly $209.8 million, is the largest single state contract for energy performance in the nation. ESC is a national nonprofit organization of experts working together to increase energy efficiency and building upgrades through energy performance contracting. The Department of Business, Economic Development and Tourism estimates that over the life of the contract, which ends in 2034, the economic impacts will be $27.3 million in tax revenues (in 2016 dollars), $186.6 million in income to households (in 2016 dollars), and 867 jobs generated or supported each year during the first two years of construction in Phase I with 257 jobs supported each year during Phase II construction and installation and an average of 63

Kirby-Smith Announces Hiring of Rickey Bailey as Vice President, Crane Division Kirby-Smith Machinery Inc., an equipment distributor and Manitowoc certified elite dealer, has announced the hiring of Rickey Bailey as vice president, crane division. Bailey will be responsible for the strategy and oversight of KirbySmith’s crane operations, replacing the recently retired Ben Graham who had led the company’s crane division for more than 16 years. Prior to Kirby-Smith, Bailey served as manager of major accounts of Link-Belt Construction Equipment Company. Bailey has more than 20 years of crane industry experience with management roles at the manufacturer, distributor and end-user level. In addition to Link-Belt Construction Equipment, he also has worked for Link-Belt Mid-Atlantic and Bulldog Erectors Inc. Jeff Weller, executive vice president and chief operating officer of Kirby-Smith, believes Bailey will build upon the foundation that Kirby-Smith has established for its Crane Division. “When choosing a successor for Ben, we needed someone with the right experience who would fit our culture, uphold our expectations for excellence, and be comfortable in Oklahoma — Rickey fits all those criteria,” said Weller. “He is a ‘known commodity’ in this industry, and possesses both a strong work ethic and customer-facing mentality. I trust that he will take great care of our customers and am excited to welcome him to our family at Kirby-Smith.”

Weller also praised the retiring Graham for his role in building Kirby-Smith’s presence in the crane market. “Under Ben Graham’s leadership, our crane division has grown immensely and developed an industry-wide reputation for quality and customer service,” said Weller. “I know he is happy for the opportunity to spend more time with his four grandchildren. I am grateful for everything Ben has done to get us to this level, and wish him the best in his retirement.” Bailey is ready to serve Kirby-Smith’s customers and seize new opportunities for the crane division. “It is an honor to join this great team. Ben and his group have established an incredible division here and I look forward to continuing the great work already being done,” he said. Bailey’s roadmap to success is eerily similar to the one which helped grow Kirby-Smith into a top-10 Manitowoc dealer. “Our expectation is to provide the best service and support in the industry. Kirby-Smith will continue to work hard each day for opportunities to help our customers with their lifting needs,” said Bailey. For more information, call 888/861-0219 or visit kirbysmith.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipRickey Bailey mentguide.com.)

jobs generated or supported each year during the performance period. In addition, the contract supports Hawaii’s commitment to the performance contracting accelerator program, part of the U.S. Department of Energy’s Better Buildings Initiative. Performance contracting implements energy and water efficiency projects using guaranteed energy savings to pay for the projects. State and county agencies face increasing energy costs and the need to replace or upgrade aging, inefficient and obsolete energy and water consuming equipment. Capital improvement and operating budgets have been unable to keep up with the needed upgrades for energy and water efficiency. Performance contracting allows agencies to fund some of these needs and to install energy efficiency retrofits in a timely manner. Performance contracting retrofits can take less than one year to up to three years to install. Therefore, energy savings occur sooner. Capital improvement projects can take from six to 10 years, resulting in missed opportunities for annual energy savings. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 15

CASE AUTHORIZED DEALERS ALERS Alaska

Oklahoma

YUKON EQUIPMENT Anchorage (907) 277-1541 Fairbanks (907) 457-1541

OCTT EQUIPMENT Clinton (580) 323-3422 Oklahoma City (405) 789-6812 Tulsa (918) 437-5085

Arizona

MEET THE HE

TOTAL PACKAGE. A

BINGHAM EQUIPMENT Casa Grande (520) 836-8700 Parker (928) 669-9271 Y Yuma (928) 726-4701 726 4701 TITTA AN MACHINERY Phoenix (602) 269-3221 Tucson (520) 623-5848

California DIAMOND A EQUIPMENT E Oxnard (805) 485-2103 Santa Maria (805) 621-7830 SEQUOIA A EQUIPMENT E T COMP PA ANY Bakersfield (661) 679-1470 Fresno (559) 441-1122 SONSRAY AY MACHINER RY Y El Cajon (619) 873-0123 Fontana (909) 355-1075 Redding (530) 245-9000 Sacramento (916) 649-0096 San Leandro (510) 562-0653 Santa Fe Springs (562) 903-7377 Stockton (209) 464-9600

Colorado CENTURY RY EEQUIPMENT Clifton (970) 434-7363 Durango (970) 247-0522 TITTA AN MACHINERY Colorado Springs (719) 596-2924 Henderson (303) 286-7000 Windsor (970) 461-4960

Idaho BURKS S TRACTOR T Caldwell (208) 466-7875 Twin Falls Tw (208) 733-5543 PIONEER R EQUIPMENT E American Falls (208) 226-5209 Blackfoot (208) 785-0008 Idaho Falls (208) 523-5455 Rexburg (208) 359-8000

Montana THE ALL-NEW

G SE ERIES WITH 360˚ TCO.

• Patented SCR engine solutionn for unmatched fuel efficiency with no diesel particulate filters, no regen and no extreme exhaust temperattures. cycle times. • Improved hydraulics plus fourr power modes for best-in-class breakoout force and faster cyc AC system m to maximize operator opera comfort and • All-new cab with best-in-class visibility and redesigned HVVAC combat operator fatigue. stanndard machine maintenance and proteection coverage in the industry. industry • The most comprehensive standard And that’s just for starters! When it comes to moving more material at the t highest level of uptime, the all-new G SERIES resets the standard for lowest total cost of o ownership. Learn morree about 360° TCO at CaseCE.com/G-Series

©2017 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed too CNH Industrial N.VV.,., its subsidiaries or affiliates.

TITTA AN MACHINERY Billings (406) 259-5500 Great Falls (406) 453-1405 Missoula (406) 543-7782

Nevada SONSRAY AY MACHINER RY Y N Las Vegas (702) 649-5012 Sparks (775) 358-5000

New Mexico TITTA AN MACHINERY Albuquerque (505) 342-2566

Oregon CENTRAL MACHINERY Hermiston (541) 567-2331 SONSRAY AY MACHINER RY Y Portland (503) 283-2461 Salem (503) 362-1371

Texas ASCO Abilene (325) 698-2726 Amarillo (806) 372-8386 Beaumont (409) 212-8100 Belton (254) 613-1500 Brenham (979) 836-6641 Bryan (979) 779-8942 Euless (817) 283-2844 Houston (North) (281) 987 987-1990 1990 Houston (South) (713) 649-0940 Lubbock (806) 745-2000 Manor (512) 272-8922 San Angelo (325) 655-5666 San Antonio (210) 333-8000 Sherman (903) 893-7586 Terrell (972) 563-2171 Tyler Tyl (903) 593-0201 Wichita Falls (940) 687-2726 NUECES S POWER P Corpus Christi (361) 289-0066 Laredo (956) 725-0066 San Benito (956) 361-0066 Victoria (361) 576 576-0066 0066 Vinton (915) 541-0066 PERMIAN TRACTOR Odessa (432) 367-8628

Utah CENTURY RY EQUIPMENT Cedar City (435) 586-4406 Logan (435) 752-1533 Salt Lake City (801) 262-5761 Springville (801) 794-1463

Washington CENTRAL MACHINERY Moses Lake (509) 765-1257 Pasco (509) 547-9003 Sunnyside (509) 837-3833 SONSRAY AY MACHINER RY Y Auburn (253) 735-2702 Marysville (360) 651-2171

Wyoming CENTURY RY EQUIPMENT Rock Springs (307) 382-6570 TITTA AN MACHINERY Gillette (307) 682-9742

Page 16 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 17

KEEP MA M TERIALS MOVING AND PROFITS FLOWING. Steep slopes, deeep ruts, and slippery muck are no match for the 370E,, 410E, and 460E ADTs. With impressive power p and torque for excepptional power-to-weight rattios and fast cycles, these trucks haull more for less cost per ton.. The all-new Deere-designeed cab is sealed and pressurized to keep out dust and noise, and the fully adjustable air-ridee seat makes smooth sailing of any terrrain. Remote park-brake releease, rollover protection, an nd auto horn alerts ensure complianc p ce on the strictest of jobsite j es. And an optional p onboardd-weighing g g system y is calibrated to two-percent accuracy. Haul mo ore for less — call us today.

RDO EQUIPMENT CO.

PAPE MACHINERY

www.rdoequipment.com

www.papemachinery.com

Flagstaff 5500 East Penstock Ave Flagstaff, AZ 86004 928-526-0639

Chandler 1400 S Maricopa Road Chandler, AZ 85226 602-845-1800

Imperial 3275 Hwy 86 Imperial, CA 92251 760-355-4331

Pflugerville 16415 N IH-35 Pflugerville, TX 78660 512-272-4141

Phoenix 2649 N 29 Ave Phoenix, AZ 85009 602-415-4700

Lakeside 10108 Riverford Road Lakeside, CA 92040 619-443-3758

Irving 3230 East Airport Freeway Irving, TX 75062 972-438-4699

McKinney 2902N. Central Expressway McKinney, TX 75071 214-856-4899

Prescott 1091 Commerce Drive Prescott, AZ 86035 928-776-8300

Riverside 20 Iowa Avenue Riverside, CA 92507 951-778-3700

Fort Worth 5301 Mark IV Parkway Fort Worth, TX 76131 817-232-8094

New Braunfels 19275 N IH-35 New Braunfels, TX 78132 830-632-3100

Tucson 5051 S Outlet Center Drive Tucson, AZ 85706 520-294-5262

Indio 83-300 Avenue 45 Indio, CA 92201 760-342-8900

Hewitt 215 Enterprise Blvd Hewitt, TX 76673 254-666-3900

Laredo 102 Wilcox Road Laredo, TX 78043 956-718-1909

HONNEN EQUIPMENT CO. www.honnen.com

Newark 800-231-2060 510-790-3600 Fax: 510-790-9120

Rohnert Park 800-325-9401 707-584-9161 Fax: 707-584-4786

5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636

Sacramento 800-227-3399 916-922-7181 Fax: 916-922-4532

Gilroy 800-848-4150 408-848-4150 Fax: 408-848-5163

Durango, CO 970-247-4460

French Camp 800-619-6319 209-983-8122 Fax: 209-983-1105

Redding 530-241-4555 Fax: 530-241-0619

Fowler 559-834-4774 Fax: 559-834-4754

Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441

St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

Page 18 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alaska Celebrates 75 Years of Alcan, Soldiers Who Built It ALASKA from page 1

country whose defense was vital to the defense of the United States. “That’s what we focus on here,” said Woster. “The [United States] lent the Soviet Union 7,926 aircraft to fight the Germans. The planes were stationed in Great Falls, Mont., and would come up through Canada, into Fort Wainwright here in Fairbanks, at which point we would take out everything we didn’t want to share with Soviets. They chose this route as a way to connect various Lend Lease airstrips, as well as support troop movements if necessary.” Surveying work began in early 1941. “More than 10,000 soldiers from the United States Army Corps of Engineers were assigned to the project, of which approximately 3,700 were black Soldiers belonging to three all-black regiments — the 93rd, the 95th and the 97th,” said Fort Wainwright Landscape Historian L. Amber Phillippe. History records that the conditions were brutal, the men not treated well. “They worked in some of the most extreme conditions you see on our planet,” Meadow Bailey, public information officer for the Alaska DOT. “The regiments built from Alaska and Canada and worked toward each other. They did a fantastic job.” And they finished the 1,400-mi., $138 million (the equivalent of $2.1 billion in today’s economy) project in what must have seemed record time.

Library of Congress photo

Trucks load up at gravel dump.

“It’s more than 1,000 miles of road they built from May to October,” said Woster. “The first year it was a lot of bushwhacking, clearing a trail, just cut right out of wilderness. A lot of the photographs show trucks and construction equipment just completely bogged down in melted permafrost. There are photos of them stuck halfway up to the doors in mud. It was a herculean effort to get this built.” One solution to keep vehicles from sinking into the mud was an early road construction technique known as corduroy — still used in remote areas and on service roads today, Woster noted. “It’s still a quick and easy way to make a road passable without

Library of Congress photo

This stretch connects Edmonton to Fort Nelson.

Library of Congress photo

Crews use a Caterpillar tractor with grader to widen the roadway in 1942 during construction of the Alcan.

bringing up extra supplies. They cut down the trees — some are very small — and pave the road with horizontal laid trees and that prevents vehicles from sinking in the mud. In the boggy areas, you are literally driving on horizontal trees.” Much of the work was hard physical, manual labor. But they did manage to bring in heavy equipment, as well. According to Historynet.com, “…by train and plane, they dropped into an area that boasted more caribou and moose than humans, and they arrived with what amounted to an armada of heavy equipment: 174 steam shovsee ALASKA page 26

Library of Congress photo

A Caterpillar tractor is used to cut the road through forest.

A bulldozer knocks down trees, cutting the roadway in 1942.

Crescent City

395 139

101 299 89

Burney Eureka 299 Rio Dell

CALIFORNIA STATE SECTION

395

299 44

44 36

101

Leggett

395

Chico

Oroville

Fort Bragg Point Arena 20 1

80 Tahoe City Auburn 50 South Lake Sacramento Tahoe

101

70 5

Santa Rosa

505 80

395 49

680

San Francisco

Sonora

Berkley 580 Oakland 280

120 120

120

Modesto

880

San Jose

140

101 1

395 152

Madera

Santa Cruz Montery

Fresno

180

190

198 1

Death Valley Junction

King City Lucia

198

101 127 46

178 15

San Luis 33 Obispo Santa Maria

Bakersfield

Baker

395

Barstow

101 14

Ventura

Glendale San Bernadino Los Angeles Riverside Santa Monica Santa Ana 10 Palm Springs Long Beach 1

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”

Santa Barbara

101

Oceanside

Your California Connection – Debbie Hansen – 1-702-239-0348 – dhansen@cegltd.com

San Diego 8

Credit Ayars & Associates photo

Workers are building two new highway overcrossings as part of California’s $60 million Highway 101, Linden and Casitas Pass Project.

Changes Coming to Santa Barbara Roads By Chuck Harvey CEG CORRESPONDENT

Workers are building two new highway overcrossings as part of California’s $60 million Highway 101, Linden and Casitas Pass Project that includes local circulation improvements and key bridge replacements in preparation for future Highway 101 widening. Work started in fall of 2016 and will continue through 2020. The project, located in Carpinteria near Santa Barbara, is a partnership between Caltrans, the Santa Barbara County Association of Governments and the city of Carpinteria. Funding is through state and federal tax revenue. The city is working with Caltrans to develop and complete the Linden Avenue and Casitas Pass Road Interchanges Project. Security Paving Co. of Sylmar, Calif. is the contractor. The project consists of replacing both the Linden Avenue and Casitas Pass Road U.S. 101 overcrossings,

reconfiguring the northbound on- and off-ramps at Casitas Pass Road, extending the northbound Linden Avenue onramp, replacing the U.S. 101 freeway bridges over Carpinteria Creek at Via Real, and extending Via Real over Carpinteria Creek to Casitas Pass Road and to Linden Avenue. A total of five bridges are being

replaced. The project also includes removal of four existing bridges. Crews are putting up new retaining walls, sound walls, traffic signals and drainage structures. New bike lanes and sidewalk improvements will make it easier for residents to use local streets for in-town see HIGHWAY page 22

The project local circulation improvements and key bridge replacements in preparation for future Highway 101 widening.

Credit Ayars & Associates photo

Page 20 • June 11, 2017 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Crews Hope to Replace Dam’s Spillway by November

California Department of Water Resources photo

Crews aim to replace the lower portion of the spillway by Nov. 1, when winter rain and snow increase the flow of water into the lake.

California Department of Water Resources photo

SPILLWAY from page 1

“We’re always working to accelerate faster,” said Jeff Petersen, project manager of Kiewit Corp., said in a conference call with reporters. Kiewit, based in Omaha, Neb., was awarded a $275 million contract to complete the massive project. The spillway is the main outlet for Oroville Dam, the country’s tallest. Huge swathes of the spillway’s lower portion began washing away in February. When a second, emergency spillway also began giving way Feb. 12, authorities ordered the temporary evacuation of 188,000 people downstream. Officials described a Herculean operation that includes the construction of miles of access roads, two concrete plants and a maintenance facility for heavy equipment. see SPILLWAY page 24 California Department of Water Resources photo

They hope to begin pouring fresh concrete in June, starting from the bottom of the 3,000ft. chute and working their way up.

California Department of Water Resources photo

The spillway is the main outlet for Oroville Dam, the country’s tallest.

Officials described a Herculean operation that includes the construction of miles of access roads, two concrete plants and a maintenance facility for heavy equipment.

Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • June 11, 2017 • Page 21

14635 Valley Blvd. Fontana, CA 92335

800-316-0327

SOUTHERN CALIFORNIA’S ONE STOP SHOP www.scottequip.com

New and used equipment sales

Full Service Dealership:

Field service capabilities

Experienced parts department

Fully equipped shop

Wide range of equipment rental machines

Page 22 • June 11, 2017 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Overdue Improvement Project Under Way for Highway 101 HIGHWAY from page 19

trips. A new bike way is being constructed along Carpinteria Creek to connect into a new bike path along Via Real. The improvements are part of a bigger plan for Highway 101. “The longer overcrossings, new bridges and safer on and off-ramp connections all prepare for the future addition of a carpool lane on Highway 101 while providing needed improvements for locals,” said Toby Ayars, owner of Ayars & Associates Inc. of Santa Barbara, Calif. Highway 101 is being widened from two to three lanes as part of Phase 4, the next project, Ayars said. The current $60 million project is the third phase of widening Highway 101 between Santa Barbara and Mussel Shoals. Eight of the 16 mi. in this area have already been widened to include three lanes in each direction. The project is needed to address both traffic and safety concerns. Highway 101 in the area has not seen improvements since the 1950s. Since then, traffic has increased considerably. “Safety will be improved through new, longer on and offramps, new traffic signals and additional lanes,” Ayars said. “The local street connections will make it easier to get across town without having to use the freeway.” The new bridges will help address flooding concerns. New roads, bridges, ramps and bikeways will open periodically from 2018 through 2020. Site Prep Started in Late September 2016 Most of the initial work was performed by the prime contractor. Many of the subcontractors are now on site, Ayars said. But KRC Safety Co. Inc. of Goshen, Calif., was on site early for construction of signs and CGO Construction Co. Inc. of Ontario, Calif., has been clearing vegetation. Tipco Engineering of Bellflower, Calif., is conducting pile driving operations. Heavy equipment on site includes excavators, a motor grader, a loader and a skip loader. In terms of materials, crews will

bridges also will help traffic flow smoother. Congestion will be minimized and the highway, ramps and connecting streets.

Highway 101 in the area has not seen improvements since the 1950s.

lay 25,400 tons of asphalt, 12,400 cu. yds., of concrete paving and more than 10,000 cu. yds., of structural concrete during the life of the project. The structural concrete will be used for bridges, footings and sound walls. Only about 1,500 cu. yds. of fill material will be needed for the project. Pavement Removal Crews removed pavement along Highway 101 and asphalt was sealed to prepare for lane shifts as shoulder and median widening work continues. Vegetation has been cleared and freeway lanes restriped as crews move into shoulder widening and roadway improvements.

On Linden Avenue workers prepared for pile tests associated with the new Linden Avenue bridge over Highway 101. Motorists can expect large equipment and test pile deliveries in the future roundabout area. Last October, crews installed construction area signs and fenced off areas near Highway 101, Carpinteria Creek and the future Via Real bike path. They also restriped Highway 101 lanes, shifted traffic and put up a concrete safety barrier in preparation for shoulder work. As the project progresses, highway interchanges at Linden Avenue and Casitas Pass Road will be updated with the new bridges and freeway ramps. Via Real will

Credit Ayars & Associates photo

Work started in fall of 2016 and will continue through 2020.

be connected across Carpinteria Creek through a new roundabout up to Linden Avenue. Crews conducted pile tests for the new freeway overcrossing supports. Large equipment was in the area for about a month. Initial Casitas Pass Road work to prepare the road and the southbound Highway 101 onramp for the widening of the overcrossing, occurred in early 2017. Improving Local Circulation, Freeway Access The highway interchanges at Linden Avenue and Casitas Pass Road will be updated with modern new bridges and freeway ramps and the new roundabout. The new

Local Roads Open During Daytime Construction Nighttime closures will be conducted as needed. Highway 101 will have nighttime closures to allow for safety barrier placement and to prepare for bridge construction and demolition. Linden Avenue will be closed over Hwy 101 for approximately three weeks in 2018. New roads, bridges, ramps and bikeways will open periodically from 2018 through 2020. The City of Carpinteria Will Own Facilities Facilities to be owned by the city include: Via Real extension from the Carpinteria Creek area to Casitas Pass Road, Via Real extension from Vallecito Road to the Ogan Road-Via Real-U.S. 101 northbound onramp roundabout, two traffic signals (three new Traffic Signals will be owned by Caltrans), Via Real Bridge over Carpinteria Creek, the northbound onramp roundabout, storm drains, street lighting, landscaping, vegetated bio-swales and street trees. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • June 11, 2017 • Page 23

562.273.7013 www.coastlinecd.com Headquartered: Long Beach, CA

IN STOCK CALL FOR PRICE! 2017 MANITEX 40124SHL Stk #: 67572 40 Ton

2015 MANITEX 1970C Stk #: 39537 19 Ton - $148,000

IN STOCK CALL FOR PRICE! 2017 ELLIOTT M43R Stk #: 71466 48’ Reach

2006 TADANO TR150 XL-4 Stk #: 1452 15 Ton - $105,000

IN STOCK - CALL FOR PRICE! 2017 MANITEX TM200 Stk #: 67192 22 Ton

2012 SKYJACK ZB20044 Stk #: 35393 $125,000

SALES | RENTAL | PARTS & SERVICE “Your Crane and Boom Truck Headquarters”

2009 TADANO GR300XL-1 Stk #: 1678 30 Ton - $125,000

2014 MANITEX 35124C Stk #: 40899 35 Ton - $272,000

2015 SHUTTLELIFT CD5515-2 Stk #: 41163 15 Ton - $132,500

Skanska, Ames to Build California’s I-15 Express Lanes Skanska announced its joint venture with Ames Construction has been awarded a $243.9 million designbuild contract from the Riverside County Transportation Commission to construct new express toll lanes on the I-15 freeway. Skanska USA Civil will include its $146.3 million portion of the contract in its Q1 2017 order bookings. The project will improve I-15 between Cajalco Road and state Route 60, adding two tolled express lanes in each direction, a distance of 14.6 mi. An enhanced feature of this project is that drivers will be able to access and exit the tolled lanes at multiple locations. Additional project elements include the construction of a series of sound walls along the project corridor as well as widening bridges to accommodate the new tolled express lanes. Construction will begin in 2018 with anticipated completion in mid-2020. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

REXIN EQUIPMENT 2641 East Artesia Boulevard • Long Beach, CA 90805 562-531-4600 Or Call Joe Rexin 714-299-2273 www.rexinequip.com

IN STOCK CALL FOR PRICE! 2017 MANITEX 22101S Stk #: 64603 22 Ton

2014 MANITEX 2892C Stk #: 38051 28 Ton - CALL

PRICED TO SELL! 2016 ELLIOTT L60R Stk #: 41875 62’ Reach

RENTALS

HEAVY EQUIPMENT

Page 24 • June 11, 2017 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Serving the Construction & Mining Industries Since 1962

Former Rental Units for Sale:

1996 CAT 825G, Excellent 35ton soil compactor with cab, AC, S-Dozer with tilt, 700hrs on rebuilt extra tall feet, 100hrs on in-frame engine kit, original paint. Runs great, no problems, Hours: 19,670, Serial Number: 6RN00285, Stock Number: 3821....$180,000

1997 CAT D5M XL, Cab, AC, 6-way PAT dozer, ripper, 50% tracks but needs shoe regrouser and rollers. 6100hrs on trans rebld., Hours: 11,150, Serial Number: 4BR00308, Stock Number: 5306........................ $55,000

2007 CAT 314C LCR, Excellent compact radis with off-set boom, cab, AC, dozer leveling blade, hyd pin-grabber QC, Bucket. Ready to go! A/C, Heater, Operating Weight (lbs): 15,000, Hours: 5,200, Serial Number: PCA01450, Stock Number: 7076...... $69,900

2001 CAT 325BL, Work ready, cab, AC, reach boom, 3.2M stick, aux hydraulics, QC bucket mount, 500 hours on new tracks. CHECK NEW LOW PRICE! Operating Weight (lbs): 60,000, A/C, Hours: 8,070, Serial Number: 7EN00373, Stock Number: 7279...... $59,000

2002 CAT 330CL, Cab, AC, Long UC, reach boom, 3.9M med stick, Wedge-lock QC and QC GP Bkt Ready to work, with 500hrs on tune-up; turbo, HEUI pump, injectors. NEW LOWER PRICE! Operating Weight (lbs): 72,000, A/C, Hours: 10,160, Serial Number: DKY00419, Stock Number: 7352......$69,000

1999 CAT 345BL, Work ready, 100,000lbs class, cab, AC, reach boom, med stick, aux hyd, thumb bracket, wedge-style QC and GP Bucket. Undercarriage almost new; only 10% worn. CAT CTS report is available. A/C, Operating Weight (lbs): 100,000, Hours: 10,700, Serial Number: 4SS01437, Stock Number: 7490.................................. $55,000

2001 CAT 140H, NEW LOWER PRICE! Low profile Cab, AC, 14' Moldboard, Push block, Ripper, 30% 1400x24 Tires. Ready to work, fully serviced and maintained by large rental company, Maintenance records available, Hours: 12,400, Serial Number: 2ZK05933, Stock Number: 4071........................ $89,000

2002 CAT 740, Work ready, 40ton, 6x6 Artic, cab, AC, 95% 29.5R25 Radials, reblt hitch. Excellent running and maintained former rental unit. Could use paint. One of three available. CHECK NEW LOW PRICE! Hours: 15,000, Drive: 6 WD, Capacity: 40 tn, Serial Number: AXM00363........................ $85,000

(888) 361-4454 • Mike Kustura: sales@EccoEquipment.com

Santa Ana, CA – HQ (714) 554-4851

Visalia, CA (559) 651-0116

San Diego, CA (619) 205-2026

Coachella, CA (760) 578-1043

Sacramento, CA (916) 997-7492

Bullhead City, AZ (928) 715-0672

Riverside, CA (951) 276-9025

Stockton, CA (510) 516-5567

Phoenix, AZ (602) 276-2040

Las Vegas, NV (702) 877-4302

Salt Lake City, UT (801) 796-7368

Ditch Witch Completes Asset Purchase of Four Locations Ditch Witch Northwest, a Papé Company, has announced the completed asset purchase of four Ditch Witch locations in California. The acquisition brings Bay Area Trenchers Inc. (Ditch Witch Bay Area, Ditch Witch Central California, Ditch Witch Southern California, and Ditch Witch El Cajon) together with Ditch Witch Northwest’s five other locations, effective June 16, 2017. No terms of the acquisition will be announced. “Customers in the Northwest and California can rest assured that Papé will continue to offer the best selection of new and used Ditch Witch equipment supported by the people they trust,” said Chris Wetle, president of Papé Material Handling, who leads Ditch Witch Northwest for The Papé Group, Inc. “We take pride in providing our new and current customers with consistent, high-quality customer service — the corner-

stone of all Papé companies since our first dealership opened in 1938.” Since 1989, Bay Area Trenchers Inc. has provided the Bay, Southern and Central California with quality trenching equipment. Mike Anderson, president of Bay Area Trenchers Inc., commented, “We’re proud to work with Papé’s Ditch Witch division, a company known in the industry for the same level of service we’ve provided and committed to over the last 28 years.” Papé now serves Ditch Witch customers in Southern and Central California, the Bay Area, Montana, Washington, and Oregon. For more information, visit ditchwitchnw.com and pape.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Crews Clear Debris From Dam’s Spillway Demolition

2000 CAT D8R, Work ready, full dress D8R with EROPS cab, AC, 8SU dozer with tilt, MS Ripper with two shanks, engine side doors, 4200hrs on rebuilt trans, 1700hrs on rebuilt Torq, 50% U/C. Good looking, good running, low hour dozer. NEW LOW PRICE! Hours: 8,350, Serial Number: 7XM04721, Stock Number: 5879................................ $139,000

www.eccoheavyequipment.com

New California Dealers...

Boise, ID (208) 459-3800 Williston, ND (701) 572-8126

Huge swathes of the spillway’s lower portion began washing away in February. SPILLWAY from page 20

By August, 500 employees will be on the site, with work spanning 20 hours a day, six days a week, said Jeanne Kuttel, chief engineer of the project with the California Department of Water Resources. Crews aim to replace the lower portion of the spillway by Nov. 1, when winter rain and snow increase the flow of water into the lake. They’ll reinforce concrete near the top of the

structure, which was not damaged, then tear it out and replace it next year. Plans for the emergency spillway call for drilling 30 to 50 ft. into the ground and building a wall anchored to the bedrock in order to prevent erosion. Next year, crews will reinforce the hillside. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 25

THE LEAD DING SUPPLIER OF HYDR DRAULIC & INDUSTRIALL HOSES, HOSES FITTINGS S, ADA APTERS & MORE!

MINIMIZE EQUIIPMENT

C CUSTOM BUILT

DOWNT IME WITH OUR ET ETA 1 HO OUR 24/7

ON SI ITE HOSE SER RVICE Our trained service techn nicians arrive at your site, remove the fai f led hose, then fabricate and install a new high quality hose on site to ge et you up and running quickly. Phoenix, AZ PIRTEK Sky Harbor 602-414-4673 Tucson, AZ PIRTEK Palo V Verde erde 520-838-0199

Los Angeles, A CA PIRTEKK Commerce South 3223-724-6737 PIRTE EK Long Beach 5662-426-9219 PIRTE EK Inland Valley 9009-773-1700

Lufkin 936-632-6775

Nederland 409-722-7368

Bryan 979-775-7368

Channelview 281-452-7368

H E ASSEMBLIES HOS Equ uipment Managers, make life e easier! We can supply ALL the specialized zed parts you u need, even hard to find mettrics, at our con nvenient service counters. We also offer: f

We B Bring i th the Hose Shop H S to You! o

• Tube Bending Service • Oi O l Filtration Products • Pneumatic P Products • Machine M and Component Rec covery • Preventative Hose Maintenance Programs • Automotive A Products, Brake Lines L , • An A d More!

Oakland, C CA PIRTEK San Leeandro 510-568-5000

San Francisco, CA PIRTEK SFO 650-532-9200

Fort Collins, CO PIRTEK NoCo 844-221-2121

Sacramento o, CA PIRTEK Poweer Inn 916-737-7777

Orange, CA PIRTEK OC 657-216-1600

Denver, CO PIRTEK North V Valley alley 303-487-0573 PIRTEK South Valley 720 377 2171 720-377-2171

www.mustangcat.com

Dallas/Ft. /Ft.Wo orth, TX PIRTE EK Plano South 972-423-1111 PIRTE EK Love Field 2144- 631-8600 PIRTEK Meacham 8177-989-6425

Houston, Bingle 713-838-7368

Freeport 979-233-7368

Houston, SW 713-838-7368

Conroe 936-788-7368

Austin, TX X PIRTEK Riverside side 512-448-0800 00

San Antonio, TX PIRTEK Broadway 210-822-0800

Houston, TX PIRTEK Jersey Village 281-741-2979 79 PIRTEK Gulfgate ate 713-649-3800 00

Seattle, W WA A PIRTEK Kent 253-872-4646 PIRTEK Woodinville 425 486 6653 425-486-6653

Page 26 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alaska Highway Construction in WWII Paves Way for Military Desegregation ALASKA from page 18

Library of

Congress photo els, 374 blade graders, 904 tractors, and more than 5,000 trucks, as well as bulldozers, snowplows, cranes and generators.” When it officially opened in the fall of 1942, it was dubbed the Alaska Canadian Military Highway. In those early years, the road wasn’t paved or even covered with gravel in some places, and it was open only to the military. It opened to tourists in 1948, spawning the hasty construction of garages and road houses, most of which just as quickly disappeared. “You can still see them,” said Woster. “As road improvements hap- This Caterpillar tractor breaks up the ground for grading. pened, vehicles got faster and the road got smoother, the vehicles would just Library of Congress photo pass by and people would go out of business.” Today it is simply the Alaska Highway or to many who’ve driven it, the Alcan. The Alaska Highway Heritage website describes the Highway as crossing five summits ranging from 3,198 to 4,199 ft. “The highway is divided into three distinct sections. In British Columbia, it is known as Highway 97; in the Yukon as Highway 1; and in Alaska as Highway 2. It runs through diverse natural eco-regions, from the Peace River Plains through boreal forests and Crews Grade the Alaska Canadian Highway in 1942. mountain ranges.” The Highway was recognized as an Library of Congress photo event of national historic significance in 1954, and as an International Historic Engineering Landmark by the American Society of Civil Engineers and Canadian Society for Civil Engineering in 1996. “Now it’s a wonderful road, said Woster. “Back then you had all of these problems. It was not completely paved until about 2008. I remember doing it in the ‘90s and I always make sure there is an extra gas can in the truck, always a full spare tire. It’s pretty nice now.” Fort Greely and Delta Junction — recognized as the end of the road — Two motorgraders level the roadbed. recently (June 3) hosted a full day celebration of the 75th anniversary, the work of the segregated regiments. Summit in Canada. It is where the including a guest appearance by “We had a bill passed in the Alaska Canadian American gov. officially Leonard Larkins, one of the African- Legislature designating Oct. 25 as a opened the Alaska Highway.” American soldiers who helped make day of recognition for the African (This story also can be found on the highway happen. Americans who built the road,” said Construction Equipment Guide’s And there are more celebrations to Woster. “The big international celebra- website at www.constructionequipcome, including a day commemorating tion is going to be June 29 at Soldier’s mentguide.com.) CEG

Barnsco, Inc. 2609 Willowbrook Rd. P.O. Box 541087 Dallas, TX 75220 214-352-9091 Hutto, TX 512-354-4970 Fort Worth, TX 817-740-2400 Walled Lake, MI 248-668-1010 www.barnsco.com

ALLWEST UNDERGROUND RENTALS - SALES - SERVICE 799 Valentine Ave SE • Pacific, WA 98047 800-828-8505 • 253-987-7555 Fax: 253-987-7556 4020 NE Buffalo St. Portland, OR 97211 506-546-8875 Fax: 503-445-2020 8419 219th St. SE Woodinville, WA 98702 425-398-2353 Fax: 425-398-9354 www.allwestunderground.com

WAUKESHA PEARCE INDUSTRIES INC. 3106 North Highway 42 • Kilgore, TX 76131 903-984-2011 Fax: 903-984-1596 www.wpi.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 27

A-Z Equipment Rentals & Sales www.a-zequipment.com East Valley/Gilbert 1313 E. Baseline Rd. Gilbert, AZ 85233 480-539-8700 North Phoenix 602-992-1150 West Valley 623-925-0200 Central Phoenix 602-955-5100

Orion Equipment 18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Tejas Equipment 6380 Randolph Blvd. San Antonio, TX 78233 210-590-2445 Fax: 210-590-1432 McAllen, TX 956-682-1312 www.tejasequipment.com

APCO Equipment Corp. 3432 N. 5th Street North Las Vegas, NV 89032 702-871-7474 Fax: 702-368-0871 www.apcoequipment.com

Page 28 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 29

Four Seasons Equipment, Inc. 8111 Mills Rd. Houston, TX 77064 800-234-5007 Dallas, TX 866-270-1700 Lake Charles, LA 866-222-0053 www.fourseasons-equip.com

Heavy Equipment Rental & Sales

Orion Equipment

13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.hers-llc.com

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Page 30 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Covering 12 Counties...

Flaska JCB Expands Service With Second Dealership in Denver, Colo. Flaska JCB, headquartered in Phoenix, Ariz., has expanded to include another JCB-dedicated dealership in Denver, Colo. The new location will offer JCB’s full line of construction equipment, including large and compact excavators, telehandlers, wheel loaders, skid steers with sideentry doors and the new Teleskid. The Teleskid is the first skid steer with a telescopic boom for increased versatility, accessibility and the ability to reach farther and dig deeper than any other skid steer on the market, according to the company. The new Flaska JCB location will cover 12 counties in Colorado: Adams, Arapahoe, Boulder, Broomfield, Denver, Douglas, Elbert, El Paso, Jefferson, Larimer, Morgan and Weld. “We have had an excellent business relationship with JCB over the last three years at our Phoenix location and are thrilled to continue to work togeth-

er and promote the JCB brand in the Denver region,” said Bob Cannady, general manager of both Flaska JCB locations. “The Denver marketplace has been growing significantly in the last five years, creating a notable demand for JCB parts and service in the area. We’re excited to fulfill that need and continue to develop our relationship with JCB.” Flaska JCB is an affiliate of Forklift Exchange Inc., which was established in 1980 as a premiere source for used material handling and construction equipment, operating nationwide. The company offers both new and preowned JCB construction equipment for sale or rent, as well as new and preowned forklifts ranging in capacity from 2,000 to 100,000 lbs. In addition, Flaska JCB offers a parts and service department, a variety of financing options and will be utilizing advertising and marketing to fur-

ther communicate the availability of JCB equipment in the Denver marketplace. “Flaska JCB has already been very successful in its first few years at its Phoenix location, and we know the company will continue to provide excellent sales and service support at its new location,” said Christian Baillie, JCB North America’s vice president of construction equipment dealer sales. “The announcement of this new dealership has already been well-received, and we look forward to helping the company meet and exceed customers’ expectations at both locations.” For more information, visit www.flaskajcb.com and www.jcb.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Redevelopment of Historic Motel Along Route 66 in Albuquerque to Begin Soon ALBUQUERQUE, N.M. (AP) Redevelopment of another old motel along historic Route 66 will begin soon. Albuquerque-based Construct Southwest was selected last July by the city of Albuquerque to bring the De Anza Motor Lodge back to life. The property has sat vacant for years. The company tells the Albuquerque Journal that demolition of three buildings at the site is scheduled for June. The redevelopment project is expected to take about a year. It calls for turning the blighted motor court into upscale extendedstay units for business travelers and tourists. The historic signs fronting the roadway and several buildings will be preserved, as well as some rare Zuni Pueblo murals. The city bought the De Anza in 2003 for $891,000. The motel was built in the 1930s. For more information, visit abqjournal.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

7105 Hwy. 59 N. Victoria, TX 77905 361-541-6100 Angleton, TX 979-308-6870 www.hlavinkajcb.com

Lubbock, TX 806-745-2000 Wichita Falls, TX 940-687-2726 Odessa, TX 432-337-2823 Amarillo, TX 806-372-8386 Midland, TX 432-685-9999 Clovis, NM 575-742-2726 www.ascoeq.com

935 E South Loop Stephenville, TX 76401 254-965-6783 877-207-8782 1841 N US Hwy 286 Decatur, TX 76234 940-965-6783 www.hendershotjcb.com

Albuquerque-based Construct Southwest was selected last July by the city of Albuquerque to bring the De Anza Motor Lodge back to life.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 31

CHA ANGIN NG THE E

LA L AND A AN D CAP DSC PE

The one and a only JCB T Teleskid eleskid is changin changing ng the way landscapers work. Whether you y work in landscape design, soil preep, sod and tree installation or nurseriees and gardens, the all new w JCB Teleskid Teleskid offers ultimate versatility versatilittyy.. With a telescopic boom, now you can load pallets of sod into a pickup truck, reach over obstacles like silt fences without doing any dam mage, load dump trucks from m one side and work below grade to kkeep your machine on safe ground. And A as with any JCB machine, the T Teleskid eleskid has the attachments you need to accomplish any job. Contact Conntact your local JCB dealerr to demo this game changing piece o of equipment.

2240 W. Buckeye Rd. Phoenix, AZ 85009 602-761-2525 Fax: 602-454-8899 www.flaskajcb.com

461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON www.proconjcb.com

/JC CBNA

@ @JCBNA

JCBNA

2935 Lincoln Road Las Vegas, NV 89115 702-432-2200 www.jcboflasvegas.com

4541

Page 32 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pr o s K Pro Kno no ow w! w !

Thos Thos se in the se the know know, know know Ta ak akeuchi keuc ke uch ch hii

Tough, To oough ugh, Pow Poow weerfful, w wer ful ul, Dependab ependable ble

Power Motive Corporation

Ditch Witch of East Texas

Ditch Witch of Arizona

www.powermotivecorp.com

www.witchequipment.net 7809 Hwy. 271 Tyler, TX 75708 903-592-6226

www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351

DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

Durango 970-259-0455

Colorado Springs 719-576-5541

Cheyenne 307-634-5149

Grand Junction 970-241-1550

Milliken 970-587-1188

Tucson, AZ 520-579-0261

Tri-West Tractor, Inc. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

Waukesha-Pearce Industries, Inc. www.wpi.com 12320 South Main St. Houston, TX 77035 713-551-0506

Corpus Christi, TX 361-884-8275

Edinburg, TX 956-386-0107

San Antonio, TX 210-648-4444

Austin, TX 512-251-0013

Tomball, TX 281-351-9016

Beaumont, TX 409-721-5305

Buffalo, TX 903-322-7150

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 33

Vermeer Texas-Louisiana

Ditch Witch of Oklahoma/Tulsa

www.vermeertexas.com

www.ditchwitchok.com Edmond, OK 73034 405-348-4633 Tulsa, OK 74116 918-438-1560

Alamo, TX 956-782-5580

Waco (Ross), TX 254-829-9655

Lubbock, TX 806-745-1245

Amarillo, TX 806-622-2407

Irving, TX 972-255-3500

Midland, TX 432-685-9276

Corpus Christi, TX 361-887-8499

Houston (Cypress), TX 281-671-6000

Round Rock, TX 512-244-0505

Denham Springs, LA 225-665-7900

Kilgore, TX 903-988-9868

San Antonio, TX 210-337-7700

Page 34 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

COME OUT AND

PLAY! ICUEE 2017 | Louisville, Kentucky | October 3-5 There’s only one place you can play with all the new toys in the construction and utility industry before you buy them — ICUEE, North America’s Premier Utility Demo Expo. Come get your hands dirty on our 2-mile outdoor test track. Or while exploring 25 acres of exhibits. And learn about the newest technology at our indoor demo stage. Every other year we gather over 950 of the leading manufacturers. So you can come play in our sandbox.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 35

ROMCO EQUIPMENT CO. www.romco.com Austin, TX • (512) 388-2529 • (877) 851-1026 Buffalo, TX • (903) 322-5602 Carmine, TX • (979) 278-3570 Dallas, TX • (214) 819-4100 • (800) 227-6626 Ft. Worth, TX • (817) 626-2288 (866) 966-4602 Houston, TX • (713) 937-3005 (800) 865-6998 Longview, TX • (903) 758-5576 Rio Grande Valley, TX • (956) 565-0100 San Antonio, TX • (210) 648-4600 (800) 966-4601

HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave., Commerce City, CO (303) 287-7506 • (800) 646-6636 Durango, CO • (970) 247-4460 Grand Junction, CO • (970) 243-7090 Ogden, UT • (801) 627-0049 Salt Lake City, UT • (801) 262-7441 St. George, UT • (435) 652-8003 Casper, WY • (307) 266-4474

From the moment you first experience the efficiency, reliability and durability of a Hitachi excavator, you too will become Hitachi To The Core. These machines can help take productivity to the next level and boost your bottom line. So operators can do what they say.

Gillette, WY • (307) 685-4288 Rock Springs, WY • (307) 382-5284 Idaho Falls, ID • (208) 523-9915

HitachiConstruction.com

Page 36 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 37

Witch Equipment Co., Inc. Fort Worth, TX | 817-429-4824 Hewitt, TX | 254-666-3344

Ditch Witch Southwest Lubbock, TX | 806-745-6866 Odessa, TX | 432-617-8351

Ditch Witch of Oklahoma Oklahoma City, OK | 405-348-4633 Tulsa, OK | 918-438-1560

Ditch Witch of Arkansas Benton, AR | 501-316-3200 Springdale, AR | 479-419-9771

Ditch Witch Northwest Portland, OR | 503-286-6400 Tukwila, WA | 206-995-8420 Billings, MT | 406-252-7667

Ditch Witch of New Mexico, Inc. Albuquerque, NM | 505-345-1888

Ditch Witch of Arizona Phoenix, AZ | 602-437-0351 Tucson, AZ | 520-579-0261

Ditch Witch Equipment Co. West Sacramento, CA 916-371-6000

Ditch Witch of East Texas Tyler, TX | 903-592-6226

Ditch Witch of Houston Houston, TX | 713-462-8866

Page 38 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RES Announces Construction of Redbed Plains Wind Farm Renewable Energy Systems (RES), a leader in the development, engineering, and construction of wind, solar, transmission and energy storage projects in the Americas, announces the start of construction on EDP Renewables North America’s (EDPR NA) Redbed Plains Wind Farm in Grady County, Okla., just southwest of Oklahoma City. Redbed Plains Wind Farm will have a capacity of 99.1 MW and consist of 48 Siemens Gamesa turbines. An interconnection agreement for the project has been finalized with American Electric Power (AEP). Nearly 250 jobs will be created during the peak of construction. With the completion of Redbed Plains, RES will have developed and/or constructed more than 1,100 MW of wind energy in Oklahoma. Per the American Wind Energy Association, Oklahoma now ranks third in the United States with more than 6,600 MW of wind power installed. “Redbed Plains marks a significant milestone for RES, as it is our eighth wind project in Oklahoma,” stated Jason Zingerman, senior VP construction for RES. “We look forward to continued work with landowners and major stakeholders to bring the economic benefits of renewable energy to the Sooner State.”

“EDPR NA will expand its footprint to more than 600 MW of operational wind projects in Oklahoma with the completion of the Redbed Plains Wind Farm,” said Phillip

Westerby, executive vice president, technical. “The company remains committed to providing clean, renewable energy throughout North America.”

Blue Canyon, Okla.

RES began construction in April 2017 with completion scheduled for fourth quarter 2017. RES (Renewable Energy Systems) is an independent renewable energy company. At the forefront of renewable energy development for more than 30 years, RES has developed and/or built more than 12GW of renewable energy capacity worldwide. RES’ core activities are onshore wind, offshore wind, solar, energy storage and transmission. RES is headquartered in the United Kingdom and operates across the globe. RES has been active in North America since 1997, and has a renewable energy and storage construction portfolio that exceeds 9,000 MW and more than 100 projects, and has constructed more than 1,000 mi. of overhead and transmission lines. In addition, RES has a robust development pipeline of wind, solar and energy storage projects across North America, and the company currently operates more than 250 MW of renewable energy and storage projects. For more information, visit resgroup.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Deere & Company Signs Agreement to Acquire Wirtgen DEERE from page 1

information concerning the transaction is included in an investor presentation available at www.JohnDeere.com/events-andpresentations. Headquartered in Germany, the Wirtgen Group has five brands across the entire road construction sector spanning milling, processing, mixing, paving, compaction and rehabilitation. Wirtgen’s highly complementary product portfolio enhances Deere’s existing construction equipment offering and establishes Deere as an industry leader in global road construction. The Wirtgen Group has a global footprint with approximately 8,000 employees and sells products in more than 100 countries through a large network of company-owned and independent dealers. “The acquisition of the Wirtgen Group aligns with our long-term strategy to expand in both of John Deere’s global growth businesses of agriculture and construction,” said Samuel R. Allen, Deere &

Company chairman and CEO. “Wirtgen’s superb reputation, strong customer relationships and demonstrated financial performance are attractive as we expand the reach of John Deere construction equipment to more customers, markets and geographies.” Max Guinn, president of Deere’s Worldwide Construction & Forestry Division, said, “This transaction enhances our global distribution options in construction equipment and enhances our capabilities in emerging markets. Spending on road construction and transportation projects has grown at a faster rate than the overall construction industry and tends to be less cyclical. There is recognition globally that infrastructure improvements must be a priority and roads and highways are among the most critical in need of repair and replacement.” Stefan Wirtgen, managing director of Wirtgen, said, “The Wirtgen Group has a legacy of technology and innovation with market-leading products and a strong focus on

“The acquisition of the Wirtgen Group aligns with our long-term strategy to expand…” Samuel R. Allen Deere & Company

the customer. As we looked to the future, we specifically chose Deere as the buyer because of our longheld respect for the organization and our full confidence that Deere is dedicated to the ongoing success of the Wirtgen Group and our employees worldwide.” Jürgen Wirtgen, managing director at Wirtgen, added, “Our company’s strength and success comes from dedicated employees who are focused on helping customers succeed in the road construction industry. We believe this transaction allows the company to be successful well into the future — independent of our family own-

ership.” Deere plans to maintain the Wirtgen Group’s existing brands, management, manufacturing footprint, employees and distribution network. The combined business is expected to benefit from sharing best practices in distribution, customer support, manufacturing and technology as well as in scale and efficiency of operations. The transaction has been approved by Deere’s board of directors. The purchase is subject to regulatory approval in several jurisdictions as well as certain other customary closing conditions. The companies said they

expect to close on the transaction in the first quarter of Deere’s 2018 fiscal year. Transaction advisors included Citigroup as exclusive financial advisor to Deere, Linklaters LLP as deal legal counsel, Kirkland & Ellis LLP as securities legal counsel and EY as accounting and tax advisor. The Boston Consulting Group served as a strategic advisor. The WIRTGEN GROUP (www.wirtgen-group.com) is an internationally operating group of companies in the construction machinery sector incorporating the traditional product brands: Wirtgen, Vögele, Hamm, Kleemann, Benninghoven, and Ciber. The Wirtgen Group offers mobile machine solutions for road construction and road rehabilitation and plants for mining and processing minerals or recycling material and for the production of asphalt. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 40 • June 11, 2017 • www.constructionequipmentguide.com • Air Compressors, Generators and Light Towers Section • Construction Equipment Guide

Model

Generator Setup Hz (kW)

Lights

Boom ft. (m)

Engine

E POWER DOOSAN PORTABL 4 LSC LS L6 L8 BL2000

Kubota D1005BG Kubota D1105 Kubota D1105 Kubota D1105 N/A

30 (9) 30 (9) 30 (9) 30 (9) 24 (7.3)

4 4 4 (optional 6) 2

60 (6) 60 (6) 60 (6) 60 (8) NA

Weight Overall Overall ll era Ov l ica . (kg) ctr lbs Ele dth ft. (m) Hgt. ft. (m) Wi ) (m ft. th ng Le m ste Sy

120 120/ 240 120/240 120/240 110 - 130

49 (124.5) 58 (147.3) 79 (200.7) 79 (200.7)

167.5 (425.5) 175 (444.5) 182 (462.3) 182 (462.3) N/A

N/A

ALLMAND Maxi-Lite II (Metal Halide or LED)

Night-Lite Pro II (Metal Halide or LED)

Night-Lite (Metal Halide or LED)

Kubota D1005 CAT C1.1 CAT C1.5 Turbo Isuzu 4LE1

AL5 AL5L

4 4 4 4

Mitsubishi L3E 29 (8.9) Kubota D1005 29 (8.9) Kubota D1105 29 (8.9) 29 (8.9) Cat C1.1

4 4

Mitsubishi L3E 24.5 (8.2) Kubota D1005 24.5 (8.2)

GENIE/TEREX R L4 AL4 AL4L, Battery AL4L, Generator

4 4 or 6 4 or 6 4 or 6

26.7 (8.1) 27.7 (8.4) 27.7 (8.4) 27.7 (8.4)

Kubota Kubota Kubota Kubota Kubota

30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1)

4 4 4 4 4 4

60 (8) 60 (8) 60 (15) 60 (20)

120/240 120/240 120/240 120/240

60 (6) 60 (7) 60 (8) 60 (8)

120/240 120/240 120/240 120/240

60 (6) 60 (7)

120/240 120/240

60 (6) 60 (6) 60 (6) 60 (6) 60 (8) 60 (8)

120/240 120/240 120/240 120/240 120/240 120/240

VISIT WWW.CONS

6.3 (2.1) 6.3 (2.1) 6.3 (2.1) 6.3 (2.1)

10.6 (3.5) 10.6 (3.5) 10.6 (3.5) 10.6 (3.5) 10.4 (3.4) 10.4 (3.4) 10.4 (3.4) 10.4 (3.4) 9.2 (3) 9.2 (3)

14.2 (4.3) 15.0 (4.6) 14.8 (4.5) 14.8 (4.5) 14.8 (4.5) 14.8 (4.5)

E.COM FOR COMPLETE TRUCTIONEQUIPMENTGUID

5.7 (1.7) 1,569 (711.7) 5.8 (1.8) 1,938 (879) 6.25 (1.9) 2,123 (963) 6.25 (1.9) 2,242 (1,017) 18 (8.2) 7 (2.1)

8.7 (2.9) 8.7 (2.9) 8.7 (2.9) 8.7 (2.9)

2,435 (1,104) 2,435 (1,104) 2,435 (1,104) 2,435 (1,104)

5.6 (1.9) 5.6 (1.9) 5.6 (1.9) 5.6 (1.9)

8.6 (2.9) 8.6 (2.9) 8.6 (2.9) 8.6 (2.9)

1,800 (816) 1,800 (816) 1,800 (816) 1,800 (816)

4.5 (1.5) 4.5 (1.5)

4.6 (1.5) 4.6 (1.5)

1,090 (494) 1,090 (494)

4.5 (1.4) 5.1 (1.6) 5.1 (1.6) 5.1 (1.6) 6.8 (2) 6.8 (2)

5.0 (1.5) 5.5 (1.6) 5.6 (1.7) 5.6 (1.7) 5.8 (1.8) 5.8 (1.8)

LIGHT TOWER LISTINGS.

1,725 (782) 1,950 (885) 1,950 (885) 2,092 (949) 2,239 (1,016) 2,828 (1,283)

Construction Equipment Guide • Air Compressors, Generators and Light Towers Section • www.constructionequipmentguide.com • June 11, 2017 • Page 41

DOOSAN. AN POWERFUL W SOLUTIONS. UTIONS At Doosan, we do more than engineer products. We engineer solutions. Robust compressors that weather her the harshest conditions. Generators and light towers that match innovation with efficiency. Unrivaled service and support, day or night. That’s a the way we’ve operated for over 100 years, and the way we’ll do business for dec d ades to come.

AIR COMPRESSORS / GENERATORS / LIGHT TOWERS Air Compressor Solutions, Inc.

Ditch Witch of Arizona

www.acsir.com

www.ditchwitchaz.com

Odessa (432) 335-5900

Phoenix (602) 437-0351

TEXAS

ARIZONA

Ditch Witch of Southern Arizona

www.ditchwitchaz.com

ARIZONA

Tucson (520) 579-0261

Sierra Machinery, Inc. www.sierraelpaso.com

TEXAS

El Paso (915) 772-0613

NEW MEXICO Artesia (575) 746-6592

DoosanPortablePower.com | 800.633.5206

Volvo Construction Equipment & Services www.vcesvolvo.com

CALIFORNIA

Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244

San Diego/ Lakeside (619) 441-3690 Corona (951) 277-7620

Papé Material Handling Inc.

OREGON

Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

www.papemh.com

NEVADA

Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386

Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

Page 42 • June 11, 2017 • www.constructionequipmentguide.com • Air Compressors, Generators and Light Towers Section • Construction Equipment Guide

Cummins…

New Spark-Ignited Generators Fit Wide Range of Applications

The RP Series is the first prime product designed, engineered and supported by Caterpillar specifically for consumers.

Caterpillar Expands Line With Its New RP12000 E Portable Generators Caterpillar is expanding the Cat RP Series portable generators line with the introduction of the RP12000 E. The new generator fills out the top of the series, delivering 12kW of running power and new features to meet the specific needs of the “pro-sumer” — emergency home back-up, DIY enthusiasts and contractors. The RP Series initially launched in North America in September 2016 with four standard models, ranging from 3.6 to 7.5 kW. The series is the first prime product designed, engineered and supported by Caterpillar specifically for consumers. The generators are now available in the United States and Canada via more than 550 Cat Home & Outdoor Power sales locations, which include regional and local retailers, traditional Cat dealers and online retailers (currently Electric Generators Direct and Amazon). Like the other products in the series, the RP12000 E was designed by Caterpillar engineering teams based in Illinois and the United Kingdom. The team focused on delivering the key design elements customers value most — power output and quality, ease of use, run-time, low noise, overall value and durability — in addition to a collection of premium features to set it apart from other generators in its class. Long Lasting Power The RP12000 E has a new, larger frame to house a larger, powerful 670cc V-Twin engine. The engine has a fully pressurized oil system and delivers up to 15kW of surge power, making it suitable for powering more equipment and heavy loads. The all-copper generator delivers a clean power with less than 5 percent total harmonic distortion, which is suitable for sensitive electronics and tools. Engineers also included a low-idle mode option, which optimizes fuel consumption and noise levels and reduces engine wear. With runtimes over 11 hours (at 50 percent load), customers will be able to work an entire day without needing to refuel.

The Cummins C100N6 is the largest of the 45-kW-to100-kW spark-ignited family of generators.

The Cummins C100N6 is the largest of the 45-kW-to100-kW spark-ignited family of generators and offers a wide range of features that enable it to fit a wide range of applications. The unit runs on either natural gas or propane without any additional hardware changes. It can be switched on the In addition to the low idle mode, engineers designed a cus- fly using software control, providing more flexibility to contom muffler and positioned the extra-large steel fuel tank on tractors and customers while reducing complexity in the top of the engine (versus the side like most competitive mod- installation process, according to the manufacturer. els) to further minimize noise levels. The design also pre“These new products are powered by Cummins QSJ5.9G vents damage from vibration. engine, which is based on the legendary Cummins 6B5.9 engine, using spark-ignited lean-burn technology. It meets Ease of Use exhaust emissions requirements without the need for Like other models in the series, the RP12000 E was aftertreatment,” said Mark Westphal, technical project leader. The generators come with a wide range of features, designed for simple, safe, fuss-free operation. It includes a lighted, single side-operator’s station, enabling the user to including the Cummins user-friendly PowerCommand 1.1 start and operate the generator without having to walk control, which offers current and power metering; an exercisaround or move it. The panel houses 9 receptacles including er function, for improved dependability; and electronic overa 50A 240V outlet, which is unique to this model and current protection for enhanced reliability. They also offer 100 percent-rated LSI circuit breakers and required for many heavy-duty tools. The RP12000 E also includes a removable lifting eye and handle, and is designed an optional third generator-mounted breaker, reducing the with a balanced center of gravity, which test users noted project cost by fully utilizing the breaker capacity. These models also are compatible with the Cummins makes it surprisingly easy to push and pull around. The PowerCommand 500 and 550 remote monitoring solutions, whole unit is deftly packed into a compact, visually appealing frame — easy to store and a show piece on any show- offering remote monitoring, diagnostics, troubleshooting and email notifications. That allows customers to remotely monroom floor. itor up to 12 devices, including the generator and transfer switch. They also have the Cummins brushless alternator, Durability with an available full single-phase reconnectable option, The RP 12000 E is constructed of solid 32 mm steel, reducing the complexity of configurations and providing which is treated and coated to prevent corrosion and rust. more flexibility. The large metal wheels include integrated bearings for long Another key feature of the new design is the aluminum life and high-quality solid rubber tires. The RP12000 E enclosure. These new models have an advanced aluminum comes with a 2-year warranty (extended to 3 years when the sound-attenuated enclosure that has been designed in an product is registered), which includes parts and service for acoustical testing center. These enclosures have been the entire warranty term, and all RP Series products are designed to be quiet, and have been tested to a 180-mph wind backed by Caterpillar’s 24/7 customer support. rating, providing protection against extreme weather and For more information,visit: http://www.cat.com/home- environmental conditions. andoutdoorpower. For more information, visit power.cummins.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Air Compressors, Generators and Light Towers Section • www.constructionequipmentguide.com • June 11, 2017 • Page 43

Atlas Copco Unveils Complete HiLight Tower Range

THE

END IS NEAR

Atlas Copco’s complete HiLight light tower range includes LED, metal halide and electric models.

Atlas Copco has expanded its range of HiLight towers to seven models, including four advanced LED solutions. The comprehensive HiLight range gives users a variety of choices when it comes to sourcing safe and efficient light towers for multiple applications and industries, including construction, outdoor events and industrial applications. The HiLight range includes the H5+, B5+, V5+ and E3+ LED light towers, plus the V4, H4 and E2 metal halide variants. Atlas Copco’s latest LED light towers feature a fully directional optic lens that maximizes practical light coverage while minimizing dark spots. A single HiLight LED light tower, depending on the model, can illuminate large areas with an average brightness of 20 lux. They also can run as long as 260 hours before needing to be refueled and consume less than 0.25 gal. of fuel per hour. Atlas Copco achieved this operational savings by designing the LED HiLight towers with dedicated power packs that optimize power output. The power packs also minimize the risk of under-loading the engine, which enhances efficiency and improves power pack longevity, according to the manufacturer. The LED lamps are designed for portability and performance with heavy-duty floodlights that offer high ingress protection (IP) and impact protection (IK) ratings. The LED lamps also offer extreme durability without deterioration in lux level while providing instant light. The HiLights’ LED bulbs withstand rugged construction sites, minimizing the see ATLAS page 45

Time is running out. Don’t miss this opportunity to grab a Tier 3 Flex portable air compressor before they’re gone. Tier 3 units are still available from 750 to 1800 cfm, pressures up to 500 psi. In order to secure your Tier 3 Flex machine, orders must be placed prior to September 1st. Order now before it’s too late... All Tier 3 machines must be completed prior to December 31, 2017 LEARN MORE AT:

www.Sullivan-Palatek.com

(219) 874.2497

Page 44 • June 11, 2017 • www.constructionequipmentguide.com • Air Compressors, Generators and Light Towers Section • Construction Equipment Guide

Wacker Neuson’s Light Towers Add Big Benefits in Small Package Wacker Neuson’s new line of light towers offer big benefits in a smaller package. The LTV series features a compact-body design and vertical mast that allows for more units to be transported on a single trailer; 18 units will fit on a 48 ft. flatbed truck. But don’t let the size fool you. These light towers are designed for long hours of lighting and industry leading 750 hour service intervals. The LTVs provide plenty of light for general job sites, site prep, concrete pours, special events, parking lots and road/bridge work, according to the manufacturer. Designed for productivity, versatility and convenience, the LTV6 and LTV8 models can be set up quickly and run for more than 95 hours of lighting time due to the 45 gal. (170.3 L) fuel tank. The adjustable vertical mast extends 23 ft. (7 m) and can rotate 360 degrees for optimum lighting flexibility. The ground level mast rotator provides for faster light positioning. Three models are available. The LTV6 is offered with the choice of a 12.2 hp Kohler engine or a 13.1 hp Kubota engine. Both units are available with a 6 kW Mecc Alte generator. The LTV8 is powered by a 15.4 hp Kubota engine and has a Mecc Alte 8 kW generator.

Service intervals for Wacker Neuson’s light towers is extended to 750 hours, optimizing performance and lowering the total cost of ownership. When the machines are ready for service, it’s fast and straightforward with easy access to all service components, including the ballasts that are located in the control box, according to the manufacturer. The LTVs are stable. When the mast is fully extended, the units can withstand winds up to 65 mph. The wheel base remains wide to provide stability needed for towing. But, lower the mast, fold up the tongue and these LTVs transform into a compact package for transportation and storage. The LTVs are the perfect fit to optimize deployment to job sites and take up less space while in storage or during operation. Additional benefits for the Wacker Neuson LTV series includes a DOT approved trailer with 13-in. tires. Forklift pockets and a central lifting eye provides for multiple lifting options. The Kubota powered models offer an optional auto start for increased fleet startup management. Manual double handle or electric winch options are available.

Designed for productivity, versatility and convenience, the LTV6 and LTV8 models can be set up quickly and run for more than 95 hours of lighting time due to the 45 gal. (170.3 L) fuel tank.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Doosan Portable Power LSC Light Towers Work for Road Illumination

Designed for reliability and durability, the LSC light tower is ideal for illumination of road and bridge construction, emergency and disaster relief, oil and gas drilling, mining, general construction and special events.

The Doosan Portable Power LSC light tower incorporates features that make it easy to own, use and maintain. Designed for reliability and durability, the LSC light tower is ideal for illumination of road and bridge construction, emergency and disaster relief, oil and gas drilling, mining, general construction and special events, according to the manufacturer. The LSC portable light tower features a Kubota D1005 engine. This 1,800-rpm water-cooled diesel engine meets EPA Tier IV-Final emission regulations. The power rating of the LSC is 6 kW with the utilization of a high output alternator. This voltage allows operators to illuminate the unit’s four 1,000-watt metal halide floodlights or light emitting diode (LED) lamps and utilize the receptacle power function simultaneously. With the Kubota engine, the LSC has an extended service interval of 750 hours. Integrated hinges on the street-side provide easy access to the control panel and all interior general maintenance components. The LSC also features a large fuel tank for an extended runtime of 55 hours. The LSC portable light tower is available with standard metal halide floodlights or optional LED lamps. Both fixture options provide optimal light distribution over a wide spread area and a small footprint for reduced wind load resistance. The LSC mast has been redesigned with custom-molded

plastic guides to improve tower extension and retraction. The exterior and interior of the mast have been fully coated to prevent rust and corrosion. The heavy-duty steel mast extends from 12 to 30 ft. (3.6 to 9 m). The mast is raised by dual, hand-operated winches and features an automatic safety brake. At full mast and with all four outriggers/jacks secured, the unit will withstand winds of 65 mph. The telescoping, rotating tower locks into position for precise aiming of floodlights. For traveling and storage, an automatic locking system holds the tower into place when in the stowed travel position. The compact frame design maximizes truckload shipping with the ability to accommodate 12 fully-assembled LSC units on a standard flatbed trailer for more cost-effective transportation. The LSC light tower is backed by a factory warranty providing 2-year / 2,000-hour bumper-to-bumper coverage. Options available for the LSC include LED fixtures, a block heater and a combination hitch with a 2½-in. (6.3 cm) pintle eye and a 2-in. (5 cm) ball. For more information, visit doosanportablepower.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Air Compressors, Generators and Light Towers Section • www.constructionequipmentguide.com • June 11, 2017 • Page 45

LED Light Towers Allmand Expands Into Mobile Market, Maximize Practical Introduces Maxi-Power Generators Light Coverage ATLAS from page 43

need for replacements. The bulbs also require minimal fuel, which reduces CO2 emissions by 70 percent on each model. Atlas Copco’s HiLight H5+ is ideal for large construction sites where workers are constantly on the move. The unit offers low fuel consumption and each of its four LED lamps project 350 watts of light for a 5,900-sq.-yd. illumination area. The H5+ is compact and easy to transport; contractors can fit as many as 10 units on a 42-ft. trailer. The HiLight B5+ is recommended for applications including music and sporting events, residential construction, road construction, temporary public lighting and oil and gas. Demonstrating Atlas Copco’s latest LED technology, the lamps offer exceptional durability without any loss in lux levels. The vertical hydraulic mast provides maximum safety for workers by illuminating an area as large as 5,900 sq. yds. The B5+ model features a compact box-unit design, which makes it ideal for mass transportation and easy installation. Consuming less than 0.25 gal. of fuel per hour, the B5+ can run as long as 260 hours before needing to be refueled. Ideal for general construction and tough mining conditions, the HiLight V5+ also can illuminate a 5,900-sq.-yd. area while saving as much as 60 percent in fuel compared to the typical fuel consumption of a 6-kilowatt metal halide solution. The LED lamps in the V5+ are designed for both portability and performance. Heavy-duty floodlights benefit from high ingress protection (IP) and impact protection (IK) ratings. The HiLight V4 is a leading solution within the 4,000-watt metal-halide light tower segment and can illuminate an area of 4,700 sq. yds. What’s more, the HiLight V4 and V5+ models boast the most compact footprint within the manual mast segment, enabling users to load as many as 20 units per truck. The models also integrate a number of important features, including a spillage-free frame and the HardHat polyethylene canopy. The canopy withstands corrosion, dents and fading, providing ongoing protection of the engine and overall unit while keeping the resale value high. Unlike ABS canopies, the HardHat canopy will not crack on impact with debris or other materials, according to the manufacturer. The HiLight V4’s metal halide sibling, the HiLight H4, has a heavy-duty galvanized steel canopy, hydraulic mast and can illuminate an area of 4,700 sq. yds. Completing the expanded range, the new HiLight E2 and E3+ are electric models with exceptional plug-and-light capabilities. Users simply connect to any power source, including auxiliary power, an electrical generator or directly into the grid, which helps deliver superior levels of energy efficiency. The E2 covers about 2,300 sq. yds. and the E3+, which benefits from the latest LED technology, can illuminate a 3,500-sq.-yd. area. The light towers can be used for a variety of applications, including events, urban construction, road construction and temporary public lighting. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Allmand Bros. Inc., a subsidiary of Briggs & Stratton All fluids are plumbed to the curbside edge of the generaCorporation and long-time manufacturer of high-perfor- tor’s enclosure for easy maintenance access. Likewise, all mance portable equipment, expands its product offerings lugs and receptacles are on the machine’s curbside or rear to with the introduction of Maxi-Power mobile generators. The improve operator safety during maintenance checks. Bolt-on line includes seven easily maneuverable generators ranging steel fenders allow for convenient in-field servicing, elimiin output from 25 to 150 kilovolt amps to accommodate a nating the need for welding. For added convenience, a 120variety of applications. volt GFCI receptacle can be used in any voltage setting while “Our Maxi-Power generators are designed with reliable oversized electrical lugs provide a wide range of conperformance and convenience in mind — hallmarks of all of nectability options. our Allmand equipment,” said Brian Northway, Allmand Durable 15-in. tires provide long wear life and easy towproduct manager. “We know our customers require high pro- ing. In addition, an adjustable coupler channel enhances towductivity, so our generators incorporate features that con- ing ease by allowing the trailer to be towed level to the tribute to exceptional efficiency and minimal maintenance. ground. Plus, like all Allmand equipment, it’s easy to transport.” Each generator features a power-maximizing diesel A heavy-duty, oversized alternator with separate excita- engine. The smallest unit in the Maxi-Power line, the MP25, tion winding provides the capacity to easily start large uses a 33.3-hp engine and provides 20 kW of prime power. motors and seamlessly handle variable loads. The automatic The next smallest, the MP40, has a 27-hp engine for 30 kW voltage regulator quickly adjusts to provide stable and con- of prime power. The MP45 runs on a 59-hp engine, providsistent voltage for powering even the most sensitive equipment. For flexibility on any job site, Maxi-Power generators easily switch between 50- and 60-Hertz frequencies. All models adjust between 120, 240 and 277 volts in single-phase power and 208, 240, 415 or 480 volts in three-phase. An electronic governor maintains engine speed independent of the load to provide consistent power. The Maxi-Power series features programmable start and stop capabilities for use as a standby system, allowing ease of mind and operatorfree starting. Maxi-Power generators are designed for worry-free operation. A large capacity fuel tank allows for more For flexibility on any job site, Maxi-Power generators easily switch between 50than 24 hours of operation and 60-Hertz frequencies. All models adjust between 120, 240 and 277 volts in sinbefore refueling. gle-phase power and 208, 240, 415 or 480 volts in three-phase. Additionally, external fuel connections extend operational time by allowing the unit to ing 36 kW of prime power. run off outside fuel. Should a Maxi-Power generator run out The mid-range models are the MP65-8B1 and MP65of diesel, the electric fuel primer and air-bleed (EFPA) pump 8C1, which feature 98- and 76-hp engines, respectively, and allow for easy restarting without requiring service for prim- each produce 50 kW of prime power. The MP125, which is ing. A high-capacity cold start battery provides extra amps only available in Canada, features a 152-hp engine for 100 for reliable starting in any climate or condition. kW of prime power. The largest unit, the MP150, uses a 190Maxi-Power generators feature design elements that hp engine and produces 120 kW of prime power. reduce maintenance and protect the equipment, operators Allmand backs its Maxi-Power portable generators with a and job site. A dual filtration system, protected in an acrylic two-year or 2,000-hour product and engine Limited filter housing, removes fine contaminants to enhance protecWarranty. Complete warranty details available in the operation and prolong engine life. Designed for 110 percent fullfluid containment, the unit captures all leakage in an internal tor’s manual or at www.allmand.com. For more information, call 800/562-1373 or visit reservoir to avoid site contamination. Additionally, a lockable switch voltage selector protects the engine by prevent- http://www.allmand.com. (This story also can be found on Construction Equipment ing the operator from switching voltage while the engine is running. Guide’s website at www.constructionequipmentguide.com.)

Page 46 • June 11, 2017 • www.constructionequipmentguide.com • Air Compressors, Generators and Light Towers Section • Construction Equipment Guide

Rental Store Sheds Light on Breast Cancer Awareness

Since starting out in 1945 as a mom-and-pop shop in Sunnyvale, Calif., A Tool Shed Equipment Rentals has built up its brand over the decades. While the family-owned store is now on its third generation and much larger than it was when the company originated, one thing has stayed consistent throughout: the drive to help out local charities. The rental store now has seven locations throughout Northern California. Originally opened by Robert MacArdell as a surplus store, “The White Elephant” after World War II, the rental stores are now under the leadership of MacArdell’s grandson, Robert Pedersen, who is the president and CEO. The company mostly concentrates on renting out construction equipment, general tool and industrial. It targets customers who are mostly small contractors in landscaping, remodeling and home building, but also serves industrial customers and some larger contractors who perform roadwork. Giving back to the community has always been at the forefront for A Tool Shed. This year, a big initiative for the rental store was supporting local breast cancer charity walks. Pedersen and his team like to involve their equipment and this year donated generators, lights and power cords for the walks. Recently, they bought four Chicago Pneumatic (CP) generators and decided to have one of the generators painted pink. The pink CP generator was featured at all of the local breast cancer awareness walks. Now, A Tool Shed will rent out the generator with part of the proceeds going to the Breast Cancer Awareness Foundation. “This was a two-fold idea — for one, the Breast Cancer Awareness Foundation will receive proceeds from the rental of the pink CP generator, but also the generator will continuously promote awareness around the area while being utilized on several different job sites,” said Pedersen. “The proceeds are ongoing, so as long as the CP generator is being rented by our customers, we’ll continue to keep donating.” A lot has changed in the 70-plus years that A Tool Shed has been around. However, two things have stayed consistent in the company: family ownership and generosity to the community around them. While the store plans its next big local initiative for 2017, one big pink CP generator will continue to generate proceeds for a good cause well into the New Year. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Isuzu d delivers s reliable e, tec chnolog gically a advance ed

11.8 - 23.9 9 HP 8.8 - 17.8 8 kW Tier 4 Fin nal .99L 99L - 1. 1 6L

40 - 66 HP 30 - 49 kW Tier 4 Final 2 2L 2.2L

70 - 113 HP 52 - 84 kW Tier 4 Final 3 0L 3.0L

173 - 188 HP 129 - 140 kW Tie er 4 Final 5 2L 5.2L

282 HP 130 - 210 kW Tier 4 Fina al 7 8L 7.8L

We design desig gn power sour sources to m meet the many applications tions you have or may be planning g to have...with Tier IV and beyond emission requirements r built-in for or cleaner p power and proven relia able with over 25 million on engines worldwide. Engines and Power Units engineered to meet your exact xact needs and fine-tuned uned for each application. Contact us or your local Isuzu Distributor and see how w many sizes we can bu uild for you today!

Construction Equipment Guide • Air Compressors, Generators and Light Towers Section • www.constructionequipmentguide.com • June 11, 2017 • Page 47

Jenny Products…

Compressor Features Eco-frien E Eco frien ndly, du urable a and Powerful Gas Engine, High-Capacity Pump p power in n many sizes...

362 HP 170 - 270 kW Tier 4 Final 9 8L 9.8L

512 HP 250 - 382 kW W Tier 4 Final 15 1 5.7L 7L

Isuzu Motors America, LLC :: 46401 Com mmerce Center Drive, Plymouth MI 48170 :: 734.582.9470 :: www.IsuzzuREDT Tech.com

The W11HGB-30P is equipped with an 11-hp Honda GX-Series engine with electric start. It includes a 30gal. (113.5 L), ASME-certified air tank with a durable powder coat. The compressor produces 21 CFM at 100 psi or 17.6 CFM at 175 psi.

Jenny Products Inc. offers the W11HGB-30P in its line of two-stage wheeled-portable air compressors. Featuring a powerful gas engine and high-capacity “W” pump, the compressor offers the highest air volume in its class, according to the manufacturer. The W11HGB-30P is equipped with an 11-hp Honda GXSeries engine with electric start. It includes a 30-gal. (113.5 L), ASME-certified air tank with a durable powder coat. The compressor produces 21 CFM at 100 psi or 17.6 CFM at 175 psi. Built to withstand tough operating conditions, the compressor includes several features to reduce maintenance and maximize uptime. Splash lubrication with Jenny “Ultimate Blue” compressor-pump oil offers contractor-duty protection of the pistons, crankshaft, bearings, rings and cylinders. Additionally, the W11HGB-30P is belt driven with a large flywheel and special unloading valves for easy start-ups and extra cooling, and a directional air shroud helps further reduce pump temperatures. The unit also is equipped with a totally enclosed belt guard, protectively mounted fittings, a stainless steel braided discharge hose and a large canister intake filter with replaceable filter elements for further protection. For easy maneuvering and positioning around the job site, the W11HGB-30P includes two fully pneumatic tires and convenient lifting handles. Other standard features include a manual tank drain, pressure relief safety valve, high-quality pilot valve, pneumatic throttle idle control, anti-vibration feet, and tank, regulator and outlet pressure gauges. Options include an oil sight glass, air line filter and lubricator. Additionally, different engines and pressure outputs are available upon request. For more information, call 814/445-3400 or visit www.jennyproductsinc.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 48 • June 11, 2017 • www.constructionequipmentguide.com • Air Compressors, Generators and Light Towers Section • Construction Equipment Guide

A History of Chicago Pneumatic During WWII World War II was one of the most significant events in the history of the world. While war is always tragic, the global situation sparked a new mindset of resourcefulness and innovation back home across a number of industries to help support the war effort. Chicago Pneumatic (CP), a 115 year-old company, was already an established tool manufacturer at the time, and when the country called for help, CP answered. Specifically, early on CP assisted in the war effort by developing the “hot dimpling machine” in response to airplane and military vehicle production demands. The machine was a device that heated up rivets to 1,000F and was used for dimpling, riveting and brake riverting operations. Later, in 1943, CP provided generators to the U.S. Navy’s Advance Base Sectional Docks (ABSD). The ABSD were more commonly referred to as floating dry docks. These floating dry docks were used to tow bases and follow fleets to help tend to crippled boats throughout the South Pacific. They became increasingly more important in the success of Navy affairs. The capabilities of the units improved tremendously within a year. The total capacity of a Navy floating dry dock grew immensely from 108,000 tons in 1942 to 723,000 tons by the end of 1943. It was here on these dry docks that the Chicago Pneumatic generators essentially provided all the power necessary to keep the dry docks running. It also was during WWII when Rosie the Riveter became a cultural icon of the United States, representing the American women who worked in factories and shipyards. The campaign inspired a social movement that increased the number of working American women from 12 million to 20 million by 1944 — a 57 percent increase from 1940. On Memorial Day, 1943, The Saturday Evening Post featured a cover illustration of Rosie the Riveter. The image was of a woman taking her lunch break with a CP rivet buster on her lap. It was one of Norman Rockwell’s most recognizable

After the war ended, John F. Nutt used the generator on his citrus farm.

works. More recently, a piece of Chicago Pneumatic history ended up in the hands of Chris Lyons, a compressor salesman at Gen-Tech in Glendale, Ariz. Lyons found himself in possession of a 1943 Chicago Pneumatic diesel generator

This 1943 Chicago Pneumatic diesel generator was used on floating dry docks in World War II.

that was actually used on floating dry docks in WWII. “It ended up in our lot, so I got involved and I was really intrigued by the generator’s history,” said Lyons, whose company is in the power generation business. “It is really cool to have something that was instrumental in the war and has a ton of history behind it.” CP generators were a critical part of the war effort both at home and at sea. While floating dry docks are an impressive part of history, the generators themselves are just as intriguing. The diesel generators were originally capable of producing 150 kW of power to the floating dry docks, but through the technological advances of the time, increased to 600 kW. While researching, Lyons also found pictures of equipment warehouses that were powered by these popular generators. Lyons uncovered more information about his historical generator, and learned that after the war ended, a man named John F. Nutt purchased the generator when it was sold as surplus. Nutt then utilized the generator on his 2,500-acre citrus farm in Mesa, Ariz. After his death, his widow, Eileen, presented it to a local museum where it stayed on display for a time before eventually ending up in Lyon’s hands. “It’s a storyteller in it’s own, that’s what’s amazing about it,” said Lyons. CP has an extensive history and this generator shows just how reliable their products are. From the war to warehouses to the farm, this generator has powered through a lot. It can now rest easy.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Air Compressors, Generators and Light Towers Section • www.constructionequipmentguide.com • June 11, 2017 • Page 49

Portable Air Compressor...

Sullair’s Power Stripe Offers New Look, Brand Promise Sullair’s portable air compressors will customers often use to describe Sullair air now feature a bold new look — “The Sullair compressors—in particular, the signature air Power Stripe” — which represents a com- end. Customers have come to expect their mitment and recommitment to three things: Sullair compressors will perform day in and reliability, durability and performance. day out, year after year. “The Sullair Power Stripe symbolizes Sullair understands its customers’ days what the company stands for today,” said depend on the performance of their comRussell Warner, vice president, rental & pressors. Uptime is critical, and for that reainfrastructure at Sullair. “The logo, which son, runtime was a critical element taken into represents our heritage, remains the same, consideration as Sullair resigned its units for while the new stripe embodies our bold Tier IV Final compliance. For instance, the vision for the future and 185 and 375 Tier our objective to remain IV Final units focused on our three were designed for brand pillars: reliability, fuel efficiency durability and perform- “The Sullair Power Stripe with oversized ance.” tanks, allowsymbolizes what the fuel The new Sullair ing for up to 10 Power Stripe will be company stands for today.” hours of run-time. prominently featured The 375 family on both sides of each Russell Warner has a 5-7 percent compressor. The Sullair improvement in Sullair logo will be featured fuel consumption prominently within the at full load comblack stripe, which is pared to previous flanked against the traditional Sullair green models, according to the manufacturer. color customers are accustomed to seeing. Sullair also introduced its new “Core Reliability can be seen in many of the Offering” bundles for Tier IV Final units in company’s Tier IV Final adaptations. Just the United States. The company is making one example is a 7-inch touch screen on the many previously optional features standard, 1600H Tier IV Final portable air compressor. without raising the price, giving the cusCustomers can rely on the advanced touch tomers more for their money. New standard screen for accurate, timely information features on small portables include low-fuel regarding the machine’s performance, shutdown; CDT gauge; air filter mainteaccording to the manufacturer. nance indicators; LED tail lights; and a 5Durability is what Sullair has long been year warranty on the air end. Larger portable known for. “Bulletproof” is but one word units have forklift pockets and cold weather features as standard. For more information, visit www.sullair.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The new Sullair Power Stripe will be prominently featured on both sides of each compressor. The Sullair logo will be featured prominently within the black stripe, which is flanked against the traditional Sullair green color customers are accustomed to seeing.

Page 50 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Completes Acquisition of IronPlanet for Approximately $758.5M Ritchie Bros. has completed its acquisition of IronPlanet. Ritchie Bros. acquired IronPlanet for approximately $758.5 million, subject to customary closing adjustments. The acquisition was financed through a combination of Ritchie Bros.’ previously announced senior note offering and secured term loan facility. The transaction is expected to be earnings accretive within the first year, excluding acquisition related costs. The acquisition of IronPlanet accelerates Ritchie Bros.’ strategy of becoming a one-stop, multichannel company where customers can buy, sell or list equipment, when, how and where they choose — both onsite and online. Later this year, Ritchie Bros. will combine its online EquipmentOne brand with the IronPlanet DailyMarketplace, creating a harmonized brand offering called Marketplace E that gives customers more ways to set reserve pricing. Ritchie Bros. also gains expanded growth capabilities in the oil and gas and government sectors. The company will be combining the Ritchie Bros. and IronPlanet sales forces in the United States, Canada and Europe, in line with its strategy to provide customers a onestop, multichannel experience. Territory and strategic account managers will be positioned as solution sellers and offer customers three main product offerings: RBA integrated unreserved onsite auctions; IronPlanet weekly featured auctions and Marketplace E, an IronPlanet solution. Mascus, Kruse Energy and GovPlanet will continue to remain as stand-alone businesses. As a part of this acquisition, Ritchie Bros. also enters into an initial five-year strategic alliance with Caterpillar, which is expected to strengthen its relationship with Caterpillar’s independent dealers around the world by providing them enhanced and continued access to a global auction marketplace to sell their used equipment. The company also will continue to coordinate and manage Cat auctions in respective Cat dealer geographies. “We are pleased that the acquisition of IronPlanet has been completed and I am delighted to welcome IronPlanet employees to the Ritchie Bros. family. Our shared passion for serving customers is loud and clear and it will continue to be our guiding light in the unified company,” said Ravi Saligram, Ritchie Bros. CEO. Saligram has designed his new organizational structure to maximize growth outcomes. Operational Leaders • Greg Owens, former CEO of IronPlanet, is named group president, new sectors & ventures and will oversee all aspects of the Cat Strategic Alliance, GovPlanet and Kruse Energy. He also will explore ventures to enter new sectors and businesses, both organically and through acquisitions. • Jim Barr, group president, multichannel products & technologies will lead all aspects of digital product development, online operations, digital marketing and provide strategic oversight to the technology group. • Jeff Jeter, former president IronPlanet is named president, sales U.S. and will lead the combined field and strategic accounts sales force. • Brian Glenn is named SVP & head of sales, Canada, and will lead both Western and Eastern Canadian field sales

teams. • Karl Werner will continue in his role as president, international and Jeroen Rijk will continue in his role as SVP & MD, Europe, with expanded responsibility for IronPlanet offerings. Functional Leaders • Sharon Driscoll, CFO; Todd Wohler, CHRO; Darren Watt, SVP & general counsel; and Doug Olive, SVP, pricing & valuations will continue in their roles with added responsibilities for the combined company. • Becky Alseth will assume the role of SVP, brands & innovation and focus on the evolution of all RB brands, value propositions, generating insights and leading marketing services, field marketing and seller marketing. Importantly, she will jump start a comprehensive innovation program throughout the company, initially focused on live auctions. • Doug Feick will assume the role of SVP, corporate development and integration optimization. Feick will lead M&A initiatives and in the near-term will lead on-going integration efforts. • Kieran Holm, SVP, operations excellence & efficiencies will focus on the acceleration of structural cost savings and efficiencies and proactively optimizing the site network. He also will assume added responsibility as the Synergies champion for the IP acquisition to ensure that synergy targets are achieved. • Frank Roth will assume the role of SVP, sales effectiveness and will focus on enabling the sales force to drive solution selling, create operational rigor on the use of sales analytics and sales management tools and develop programs to drive growth and increase sales productivity. • Marianne Marck, chief information technology officer, reporting to Barr, will assume responsibility for leading and overseeing the technology and engineering teams across all of Ritchie Bros. including RBA, IronPlanet, Mascus, Xcira and RBFS. She will drive overall data and technology strategy to make IT a significant competitive advantage for the company. Jeff Barca-Hall will partner with Marck as SVP & chief technology officer and will lead efforts to build future state, cutting-edge Marketplace technologies and the consolidation of current platforms and offerings. • Matt Ackley, SVP, product management and digital marketing, reporting to Barr, will be responsible for on-line demand generation, buyer product marketing, product management, inside sales and on-line auction management. • Randy Berry, SVP, digital operations, reporting to Barr, will continue to lead IP Inspections, operations and asset appraisal services and assume responsibility for RBA online operations and the customer service group. Ritchie Bros. will maintain its global headquarters and technology presence in Vancouver BC, and confirmed that Pleasanton, Calif., IronPlanet’s headquarters, also will be one of its key technology hubs. The company will optimize its U.S. office network over the next few years and establish a small commercial hub in the western suburbs of Chicago in the fall of 2017. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CASCADE TRADER, INC. www.cascadetrader.net 1380 NW State Avenue • Chehalis, WA 98532 360-748-1182

CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121

FOUR SEASONS EQUIPMENT, INC. www.fourseasons-equip.com 8111 Mills Rd., Houston, TX 77064 • 800-234-5007 Dallas TX • 866-270-1700

HEAVY EQUIPMENT RENTAL & SALES www.hers-llc.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368

JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181

NUECES POWER EQUIPMENT www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-687-2284 Laredo, TX • 956-267-1495 San Antonio, TX • 210-807-8216 San Benito, TX • 956-361-0066 Victoria, TX • 361-433-0672 El Paso, TX • 915-201-4115

www.hceamericas.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 51

Safety Is Priceless, Not Expensive Hyundai HX series excavators are packed with standard safety features that help your operators work more efficiently. All cabs are ROPS/FOPS certified A rearview camera, which can be viewed from the 8-inch touchscreen monitor, is standard Large grab rails and guard rails and Hyundai’s proprietary anti-slip surfaces help avoid falls while working on the outside of the machine Automatic travel backup alarm is standard

Hyundai’s exclusive All-Around View Monitoring option provides unprecedented visibility to the worksite.

More standard features. More value.

www.hceamericas.com To learn more about the safety features built into HX series excavators, contact your Hyundai dealer today.

MECOM EQUIPMENT www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135

MESCO INC. MOTOR CITY RENTS www.motorcityrents.com 8707 N 77th Drive, Peoria, AZ 85345 623-463-6842

www.mescoequipment.com 295 S Redwood Road, North Salt Lake, UT 84054 888-388-9114

Page 52 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ditch Witch of Arizona ditchwitchaz.com Phoenix, AZ 602-437-0351 Tucson, AZ 520-579-0261

Honnen Equipment www.honnen.com Denver, CO 303-287-7506 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com 6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 12035 Interstate 20 W Abilene, TX 79601 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977 3201 E Slaton Hwy. Lubbock, TX 79404 866/289-6087 7301 East I-20 Odessa, TX 877/794-1800 432/333-7000 © 2008 ESCO Corporation.

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ June 11, 2017 â€¢ Page 53

A BIGGER TIPPIN NG LOAD IS ONLY THEE BEGINNING. With up to 75% m more bucket breakout force than the leading competito or models â€” plus XS WR PRUH YLVLELOLW\ Y PRUH K\GUDXOLFF Æ RZ PRUH RSHUDWLQJ FDSDFLW\ F DQG PRUH KRUVHSRZHU WKDQ SUHYLRXV PRGHOV Å D QHZ * RU * 6NLG 6WWHHU U RU * RU * &RPSDFW S 7UUDFN /RDGHU LV VXUH WR PDNHH \\RXU ELJJHVW JJ MMREV ORRN D OR RW PRUH PDQDJHDEOH J /HDUQ PRUH DERXW KRZ WKHVH PDFKLQHV FDQ KHOS VKDSH XS \RXU RSHUDWLRQ Å FDOO XV WRGD\

Irving, TX 972/438-4699 Fort Worth, TX 817/232-8094 Hewitt, TX 254/666-3900 Pflugerville, TX 512/272-4141 New Braunfels, TX 830/632-3100 Laredo, TX 956/718-1909

RDO EQUIPMENT CO.

HONNEN EQUIPMENT CO.

www.rdoequipment.com

www.honnen.com

McKinney, TX 214-856-4899 Chandler, AZ 602/845-1800 Flagstaff, AZ 928/526-0639 Phoenix, AZ 602/415-4700 Prescott, AZ 928/776-8300

Tucson, AZ 520/294-5262 Lakeside, CA 619/443-3758 Riverside, CA 951/778-3700 Indio, CA 760/342-8900 Imperial, CA 760/355-4331

5055 East 72nd Ave. Commerce City, CO 80022 303/287-7506 Fax: 303/288-2215 Durango, CO 970/247-4460 Grand Junction, CO 970/243-7090

Ogden, UT 801/627-0049 Salt Lake City, UT 801/262-7441 St. George, UT 435/652-8003 Casper, WY 307/266-4474

Gillette, WY 307/685-4288 Rock Springs, WY 307/382-5284 Idaho Falls, ID 208/523-9915

Page 54 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sandia Awards 14 N.M. Construction Companies $135M in New Contracts Fourteen New Mexico companies, most of them small businesses, have been chosen to provide about $135 million in general, electrical, mechanical and civil construction work at Sandia National Laboratories. The companies are subcontractors for the labs and will compete for individual construction projects as they occur, said Krista Smith, senior manager of Sandia’s procurement operations department. The general construction subcontracts run five years and the civil, mechanical and electrical three years. In New Mexico, Sandia for years has completed construction work through construction partnership agreements, bundled together by discipline. “Having a pre-qualified group of subcontractors allows for competitive prices and a quick turnaround, and allows suppliers to gain experience and know-how with Sandia’s facilities requirements,” Smith said. “Construction partnerships also have improved Sandia’s construction safety performance over the past decade.” The subcontractors selected for general construction projects are Applied Construction Technologies 2; Engineering Constructors Inc.; H+P Construction Services; SDV Construction; Summit Construction Co.; and TEF Construction. The electrical contractors are Applied Construction Technologies 2; Del Rio Enterprises Inc.; Enterprise Electrical Services; and U.S. Electrical Corp. The mechanical contractors are HDL&M Construction Services; H+P Construction Services; Rupert Plumbing and Heating Co.; and Scoggin Mechanical Industries Inc. The civil contractors are RMCI Inc.; Summit Construction Co.; and TLC Plumbing and Utility. All the companies are New Mexicobased and all but two, RMCI and TLC, are small businesses. “These awards show Sandia is dedicated to finding and using diverse, highly qualified, small business suppliers to help the laboratories achieve its national security mission,” Smith said. “These construction partnership agreements demonstrate and reinforce our commitment to New Mexico’s small business community.” Sandia’s reviewers informed suppliers in the community last year about

KOMATSU EQUIPMENT COMPANY www.komatsueq.com 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

1409 East 3850 South St. George, UT 84790 435-986-1000

3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334

10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681 Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 800-989-7121 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540

ROAD MACHINERY

Fourteen New Mexico companies, most of them small businesses, have been chosen to provide about $135 million in general, electrical, mechanical and civil construction work at Sandia National Laboratories.

the re-bidding of the construction partnership agreements through a variety of outreach efforts, Smith said. The selected companies were among 25 firms that submitted bids. More than 70 companies expressed interest in the agreements. The bidders underwent a competitive and rigorous selection process that included meeting minimum mandatory requirements, providing information about their qualifications and technical skills, undergoing a review by a sixmember technical and safety team at Sandia and completing multiple reviews by the National Nuclear Security Administration, said Devin DeMenno, a subcontract manager in Sandia’s Infrastructure Operations Procurement Department. “All the partners are pre-qualified for facility clearances, safety, quality and technical capability to allow for us to safely and effectively execute mission requirements,” he said. The minimum requirements included being in business for at least five years, being licensed for the applicable construction discipline and having a safety record that meets certain

Occupational Safety and Health Administration requirements, DeMenno said. While much of the construction at Sandia falls under the partnership agreements, there are many other types of construction work that companies can bid on, often found on the labs’ business opportunities website. Such projects include maintenance, demolition and large-scale construction projects. Partnership subcontractors are listed on Sandia’s website and may be contacted for potential subcontracting opportunities. “The construction partnerships are a strategic sourcing plan to ensure that construction projects at Sandia will be procured and executed as quickly, efficiently and safely as possible,” Smith said. “We also want to ensure there are as many opportunities as possible for companies that want to work with Sandia.” For more information, visit www.sandia.gov. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383

KOMATSU SOUTHWEST 4520 National Park Hwy Carlsbad, NM 88220 575-628-8301 901 Troy King Road Farmington, NM 87401 505-324-8601 1181 Burgundy Drive El Paso, TX 79907 915-872-1001

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 55

KIRBY-SMITH MACHINERY INC. www.kirby-smith.com 6715 W Reno Avenue Oklahoma City, OK 73137 800-375-3339 405-495-7820 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000

POWER MOTIVE CORPORATION www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Durango, CO 970-259-0455 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188 Cheyenne, WY 307-634-5149

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 S. Main Street Houston, TX 77035 713-723-1050 Buffalo, TX 903-322-7150 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 Kilgore, TX 903-984-2011 Pflugerville, TX 512-251-0013 Port Arthur, TX 409-721-5305 San Antonio, TX 210-648-4444 Tomball, TX 281-351-9016

Page 56 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Michigan Occupational Safety and Health Administration (MIOSHA) Coffee with MIOSHA MIOSHA invited employer and employees to share a cup of coffee and learn about the importance of workplace safety and health of Michigan workers. The Coffee with MIOSHA events will provide an informal opportunity for employers and employees to meet with MIOSHA representatives (Consultative, Enforcement & Radiation) and ask questions, obtain information on program services and resources, learn about MIOSHA Training Institute (MTI) opportunities, and establish rapport. 2017 DEMING LOGGING SHOW DATES: SATURDAY and SUNDAY, JUNE 10th and 11th, 2017 PLACE: 3295 Cedarville Road, Bellingham, WA 98226 Welcome to the Deming Logging Show. Originally established in 1963, our show was inspired by the need to financially assist loggers who were injured in the woods in Whatcom County. Our grounds come alive the second full weekend in June each year for our annual Deming Logging Show with events and exhibitions to display the skills, tools and technology used in the logging industry. The history of logging runs deep in the roots of our community. Deming is proud to be the home of the breathtakingly beautiful Deming Logging Show grounds celebrating our area’s rich history and community. Camping is full for the 2017 Deming Logging Show. For more information to be placed on the Waitlist, contact Marcy Poortinga at 360/815-5461 or email: Info@DemingLoggingShow.com. Forest Products Machinery & Equipment Exposition DATES: WEDNESDAY, JUNE 14 to FRIDAY, JUNE 16, 2017 Since 1950, the Southern Forest Products Association (SFPA) has sponsored the Forest Products Machinery & Equipment Exposition – the premiere venue for equipment manufacturers to display their products and services to the wood processing industry. Every two (2) years, an international audience gathers to experience the latest technological advances serving the forest products industries. VENUE: Georgia World Congress Center (GWCC) Atlanta, Georgia, USA The SFPA Expo 2017 will showcase a wide range of products and services related to forestry sector from the leading exhibitors, for example, bandsaws, grinders, saw guides, bioenergy, hammermills, sawblades, boilers and combustion, knives, sawmill machinery, brushcutters, lasers, scanning, carriages, marking and grading, screens, chippers, material handling equipment, site preparation equipment, consulting and engineering, metal detectors, sorters, control systems, moisture meters, sprockets, conveyors, optimizers, stackers, debarkers, planers, strapping, dry kilns, plywood and panel, trailers, dust collection, recycling, trimmers, edgers, resaws, unscramblers, fans, rip saws, veneer machinery, feeders, saw filing, wrapping. Over 180 exhibitors are expected at this event to showcase

their products and service. The event will accommodate approximately 55,000 square feet of exhibit space. For more information on this Expo, contact Forest Products Machinery & Equipment Exposition, Metairie, LA. Telephone: (504/443-4464). CAM (Construction Association of Michigan) The Mid-Year Economic Forecast and State of the Industry Breakfast Date: Thursday, June 15, 2017 Table top displays will open at 7:30 AM and the Breakfast Program will follow from 9:00 AM to 10:30 AM Join the Construction Association of Michigan (CAM), the Home Builders Association of Southeastern Michigan (HBA), the American Institute of Architects (AIA), and Southeastern Michigan Council of Governments (SEMCOG), as we assess the national and regional perspectives of our economy and how it is affecting our industry. Please contact Mary Carabott at CAM (248) 972-1000 for more information. 4th ANNUAL FLEXIBLE & COST EFFECTIVE WELL SITE FACILITIES ONSHORE 2017 DATES: 27 September to 28 September, 2017 PLACE: Houston, TX North America’s Only Initiative Dedicated Entirely to Facilities Engine The Associated General Contractors of America. For more information, contact AGC main office at 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201. Phone: 703/548-3118. Fax: 703/548-3119. Email: Info@agc.org. AGC – The Associated General Contractors of America Financial Issues Committee – Join us in the Twin Cities in June 2017 DATES: June 27 – 28, 2017 PLACE: Loews Minneapolis, Minneapolis, MN The two-day meeting is filled with interactive sessions, covering the latest industry issues and their financial implications. Get the Latest Info On: Audits & Accounting Methods; Cost and Cash Flow Analysis; Estate & Succession Planning; Management and Internal Controls; Tax Planning & Preparation; Federal Reporting Requirements; Legislative Proposals and Updates. If you have not registered, here are three (3) quick reasons why you should. 1. Get Up-to-Date Information that Could Affect Your Company. 2. Reach out to the Policy-Makers. 3. Network with your Peers. For more information on this meeting, contact AGC at 703/5483118. AGC – The Associated General Contractors of America AGC Safety & Health Conference Wednesday, July 19, 2017 to Friday, July 21, 2017 Denver, Colorado AGC of Minnesota 2017 – 2018 Scholarships AGC of Minnesota is pleased to announce that the 2017 – 2018 student scholarship application form is now available. The completed form and required information is to be submitted no later than MAY 26. Questions can be directed to Merry Beckmann at mbeckmann@agcmn.org or call 651/796-2187.

AGC of Minnesota – Technical School and Craft Training Scholarships The AGC of America Education and Research Foundation offers Workforce Development Scholarships to students enrolled in accredited technical schools or craft training programs in any discipline of commercial construction. Students in technical or approved craft training programs will have until JUNE 1 to apply for $1,000 scholarships (renewable for up to two years). For more information, contact: Associated General Contractors of Minnesota. Phone: 651/632-8929. Denise Woods at dwoods@agcmn.org or website: http://www.agcmn.org.

Sponsorship & Exhibition Opportunities Available – Following two (2) consecutive years of sold-out exhibition, this is the only one-stop shop for North American E&Ps looking for the most innovative products, services and technologies in this space. If having your company aligned with powerhouses in the industry is an important part of your strategy, this event gives you enormous opportunities to capitalize on. There is really no other event in the region that will give you the chance to meet all the active operators with the right purchasing job titles. Please contact the ABC team at sponsorship@american-business-conferences.com or CALL: 800/721-3915.

MN ASPHALT PAVEMENT ASSOCIATION MAPA 4th ANNUAL GOLF EVENT DATE: MONDAY, AUGUST 14, 2017 PLACE: 12800 BUNKER PRAIRIE ROAD NW, COON RAPIDS, MN

Darby Logger Days Logger Day Grounds, Darby, Montana DATES: JULY 21, 2017 to JULY 22, 2017 Join us July 21 to July 22, 2017 in Darby, Montana for the 16th Annual Darby Logger Days celebrating the skill and bravery of those who work in the time-honored tradition of logging. The Bitterroot Valley of Western Montana comes alive with a timber sports event you don’t want to miss! There are seventeen (17) traditional logging competitions including axe throwing, pole climbing, log roll and cross-cut sawing. A family event is featuring expert competitors performing skills of days gone by. Look for plenty of activities for your little Lumberjacks, some of which are free, and many with cash prizes and gift certificates. There will be tricycle races, tug of war competitions, three (3) legged races, firewood stacking competitions, a sawdust pile treasure hunt and much more. At the end of Saturday’s competitions lucky kids win new bicycles. Entry fees for the weekend: $30.00. For more information, contact Darby Logger Days, PO Box 410, Darby, MT 59829. Email: loggers@darbyloggerdays.com.

PWA – American Public Works Association 2017 PWX Registration is NOW OPEN! Make plans now to be in Orlando, FL August 27-30, 2017! Come experience all the public works profession has to offer in Orlando at PWX 2017. PWX draws thousands of professionals from all over the world. If you are like many of them, you have limited resources for professional development. PWX 2017 should be at the top of your list if you are looking for OUTSTANDING EDUCATION SESSIONS; a chance to meet with an extensive gathering of EXHIBITORS SHOWCASING THE LATEST PRODUCTS, SERVICES and TECHNOLOGIES; and for OPPORTUNITIES TO NETWORK WITH YOUR PEERS, HONE YOUR LEADERSHIP ABILITIES and LEARN NEW JOB SKILLS! Join nearly 6,000 of your public works colleagues from North America and beyond in Orlando for this exciting event! Register Today! Contact: American Public Works Association 1200 Main Street, Suite 1400 Kansas City, MO 64105-2100 Toll Free: 800/848-2792 Local: 816/472-6100 Fax: 816/472-1610 APWA SUMMER CONFERENCE – State Championship Backhoe Rodeo is TUESDAY, JULY 11, 2017 Charleston Convention Center, North Charleston, SC Backhoe needs to be delivered by 2:00 PM. Rodeo to begin at 4:00 PM and the family dinner is 6:30 PM. For more information, contact: John Myers, Chairman, SC APWA Backhoe Rodeo at 843/670-0382 3rd ANNUAL PRODUCTION CHEMICALS OPTIMIZATION UNCONVENTIONAL OIL & GAS 2017 DATES: JUNE 27, 28 & 29, 2017 LOCATION: HOUSTON, TEXAS If you are spending millions of dollars a year on production chemicals, you need to make sure your program performs. Save the dates and reserve your place early for the 3rd Annual Production Chemical Optimization 2017 Congress, the number one production chemicals optimization event in North America returning to Houston, TX on June 27, 28 and 29, 2017. The 2017 conference will not only deliver brand new E&P success stories, new technologies and innovative ways of operating chemical programs to efficiently reduce lease operating expenses, but also give you the added option of attending specially designed pre-conference workshops to explore ways to implement the latest tools to market within a practical context.

Missouri Land Improvement Contractors Association 1101 West High Street Jefferson City, MO 65109 Phone: 573/634-3001 Email: MLICA@aol.com Web: www.MLICA.org 2017 FIELD DAY DETAILS DATES: AUGUST 3 thru AUGUST 10, 2017 PLACE: GRACE GREENLEY FARM NOVELTY/LEONARD, MISSOURI This summer, Missouri LICA is partnering with the University of Missouri on a large Field Day at the Grace Greenley Farm between Novelty and Leonard, MO. We will be installing a 13-acre retention pond, four (4) replicated drainage test plots, a bio-reactor and buffer strip, and approximately five (5) acres of drainage which will feed into the bio-reactor and buffer strip. This will be Greenley Research Center’s 40th Annual Field Day. In previous years, 300 – 400 landowners have toured the site to learn about the latest research results. With the addition of the new construction practices, we are hoping that this year’s event will draw even more! Thanks for your support! Please feel free to contact any of the people below, if you have any questions or suggestions: Co-Chair: Jim Bledsoe (816/244-0958). Co-Chair: Charles Krumpelman (660-227-1292). Committee Member: Jeff Lance (816/387-3000). MLICA Office: Debbie (573/634-3001). IOWA LAND IMPROVEMENT CONTRACTORS ASSOCIATION (IALICA) Dedicated to Professional Conservation of Soil and Water 2017 NATIONAL SUMMER MEETING WHEN: JULY 11, 2017 to JULY 16, 2017 (all-day) WHERE: ELEGANTE HOTEL, COLORADO SPRINGS, CO (USA) For more information on the 2017 National Summer Meeting you may contact National LICA: Telephone: 630/548-1984 Fax: 630/548-9189 Email: NLICA@aol.com

Wyoming...

Grand Teton’s Jenny Lake in Final Year of $18M Renovation

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

The “It’s Only Another Beer” Black and Tan 8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients. Add 1 totalled vehicle. Never underestimate ‘just a few.’ Buzzed driving is drunk driving.

JACKSON, Wyo. (AP) This year marks the final summer of construction at one of the most popular destinations in Grand Teton National Park in northwest Wyoming. Grand Teton spokesman Andrew White said this season’s work at Jenny Lake is the fourth and final major construction phase on an $18 million renovation project. White tells the Jackson Hole News & Guide that all the visitor services are open at the lake but visitors might encounter altered access routes. A temporary visitor center will be in place this summer with information on alternative routes to the lakeshore, trailhead and east shore boat dock. Parking will be extremely limited, especially for buses, recreational vehicles and trailers. White recommends arriving either before 9 a.m. or after 4 p.m. to avoid crowds. For more information, visit jhnewsandguide.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Paving

SECTION

Pages 57-65

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Wirtgen TCM 180i Texture Curing Machine Boosts Quality As soon as concrete has been paved by the slipform paver, it must be protected without delay to prevent curing moisture from evaporating, as this causes tension which, in turn, leads to cracks. When paving concrete, the curing unit, with its automatic spraying and brooming system, follows directly behind the slipform paver to produce the desired surface texture. Finally, the spraying system applies a coating to the fresh concrete to retard evaporation of curing moisture. The TCM 180i, Wirtgen Group’s new texture curing unit, further improves the pavement quality achieved with Wirtgen slipform equipment. Its modular design permits working widths between 13 ft. 1 in. (4 m) and 59 ft. 1 in. (18 m). A new engine unit means that the TCM 180i now has the most eco-friendly engine technology in compliance with emission level EU Stage 4 / US Tier IV Final. The engine also can be equipped with an additional diesel particulate filter (DPF). With its new operating concept, the curing unit can now be operated intuitively, just like the Wirtgen slipform pavers of the SP 90 and SP 60 series. In addition to a more modern and clearer arrangement, the operator’s console also features a number of new service and control functions, optimizing the work process. Its new hydraulic concept has a positive impact on the work process, for the traction drive can now be switched at different speeds, for example, between working and transport mode. Proportional control supports precision height adjustment to meet every requirement. Additionally, Wirtgen has enlarged its range of different surface textures to cater to the diverse wishes of its customers around the world. In addition to the established functions of transverse brooming and spraying, longitudinal brooming and spraying — and even the application of a diagonal finish — will be possible in the future. The machine also can be fitted with mounts for a burlap or synthetic turf. A film unwinding device (known as a Polyroll) helps to protect the concrete quickly and effectively from the negative effects of sudden rain. Traveling in reverse gear directly behind the slipform paver, the machine spreads plastic sheeting to protect the concrete from rain. For more information, visit www.wirtgengroup.com/america. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The modular design makes the self-propelled TCM 180i texture curing machine suitable for working widths from 13 ft. 1 in. (4 m) to 59 ft. 1 in. (18 m). Available in numerous equipment versions, the TCM 180i can be used to produce all manner of surface textures.

If desired by the customer, the TCM 180i also can be fitted with a film unwinder (Polyroll). Plastic sheeting unwinds in the opposite direction to the direction of travel and protects the fresh concrete from sudden rain.

Dispersion of curing moisture evaporation barrier is applied to the concrete in precisely metered quantities by the spraying unit on the transverse drive, preventing the concrete from drying prematurely. The desired surface texture is achieved by a broom unit, which also is mounted on the transverse drive.

Page 58 • June 11, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Wacker Neuson Expands Compaction Equipment Line Wacker Neuson has expanded its compaction equipment product offering with a line of tandem and combination rollers. The comprehensive line offers 15 models with operating weights ranging from 1.8 to 4.5 tons (1.6 to 4 t). Designed to increase productivity, while offering operator comfort and convenience, these rollers feature maneuverability, safety, optional configurations and Tier IV Final engines. The RD series of ride-on rollers deliver quality results in demanding conditions. With the large selection of models, contractors can easily choose the best roller for their application. The product range includes 10 tandem (double-drum) rollers with either vibration drums or oscillation drums and five combination rollers for applications on uneven ground conditions and on steeper grades. The vibration drums are ideal for traditional compaction work such as sub base for a variety of applications and asphalt repair and finish layers. Rollers with an oscillation drum compact extremely efficiently, since the drums maintain permanent contact with the ground. These rollers are an excellent choice for urban areas with sound restrictions and vibration-sensitive areas such as on bridges, according to the manufacturer. The smallest model in Wacker Neuson’s new line is the RD18, 1.8-ton, which is available in two drum widths, 31.5-in. (80 cm) and 39.4-in. (100 cm). With the unilateral drum support, users have clear sided curb clearance that allows flush rolling on both sides and flush vibration close to walls or curbs. The RD24, 2.4-ton (2 t), model offers a drum width of 39.4-in. (100 cm), and the 2.8-ton (2.5 t), RD28 has a 47.2-in. (120 cm) wide drum. The RD24 and RD28 are offered in three versions: Tandem-axle roller with two vibrating drums; combination roller with vibrating front drum and pneumatic rear tires; vibrating front drum with oscillating rear drum. These models feature an offset drum design that allows for easy maneuvering when compact-

ing along walls. In addition, the offset drum design increases productivity by reducing cut marks. In the 4-ton (3.6 t) class, contractors can choose the RD40 with its 51.2-in. (130 cm) drum width and the 4.5-ton RD45 with a 54.4-in. (140) wide drum. These models also are available as traditional tandem rollers, tandem rollers with oscillation drum or combination rollers. The RD40 and RD45 have high centrifugal forces that can tackle the most demanding compaction tasks as well as the offset drum design for enhanced maneuverability and production. Large fuel and water tanks extend operation time and central drainage means water can be drained in one simple step. The RD40 and RD45 come standard with a fold-down roll-over protective structure (ROPS). All of Wacker Neuson’s ride-on rollers feature a three-point articulated pendulum joint that ensures uniform weight distribution on the front and rear drums at all times. This also improves maneuverability and stability when turning. Due to the specially tapered design, the operator maintains an enhanced view of the drum edges and the area being compacted. The ergonomic operators’ platform with reduced vibration and ample legroom and adjustable seat all contribute to comfortable operating conditions. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 11, 2017 • Page 59

AUTHENTIC. PROVEN. REFINED.

THE ORIGINAL IS STILL THE BEST The Roadtec “Shutttle Buggy” material transfer fer vehicle (MTV) provides un nequaled perfor formance to other o MTVs and is require ed extensively by government road departments worrldwide to achieve consistently high quality asphallt pavement. Pavement life fespan tests have shown thatt a temperature differential of less than seven deg grees Celsius in the mat behind the paver is key to eve en compaction and paveme ent durability. WITH H SHUTTLE BUGGY

Infrared imaging behind the Shuttle Buggy Buggy™ MTV M in tests conducted in the U.S. U S as well as in Europe e has shown that the machine easily and consistenttly remixes to achieve temp perature differential below the seven degree Celsius threshold. This proven per p formance has led not on nly to the machine’s populaarity all over the world, butt also allows contractors to earn maximum smoothnesss bonuses and win qualityy awards, while improving prroduction. WITHOUT SHUTTLE BUGGY

ACHIEVE YOU R BEST QUALITY TO ODA AY - VISIT ROADT EC.COM

1 800 272 7100 1.800.272.

+1 423 265 0600 +1.423.265.0600

Page 60 • June 11, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Introducing 12 tons of stress relief

BOMAG introduces the new standard for affordable, user-friendly 12-ton soil compactors. The new BW211-40 series is loaded with ergonomic features to reduce operator fatigue. Plus it delivers over 53,000 lbs. of centrifugal force (nearly 62,000 lbs. for pad foot roller) over its massive 84-in working width. Other benefits include: •Redesigned, vibration-isolated operator’s platform with easy to use controls and improved sight lines •Shorter stop to stop steering input for less fatigue, 12-degree oscillation and 35-degree steering angle for optimum maneuverability •Easy open, no tool hood for better engine access •EPA-compliant Tier 3 diesel engines For detailed specs and full list of features and benefits on BOMAG 40-series rollers, visit

www.bomag-americas.com

THE COMPACTION EXPERTS

ASMUSSEN EQUIPMENT COMANY www.raseq.com

www.power-equip.com 500 E. 62nd Ave. Denver, CO 80216 303-288-6801 Fax: 303-288-6809

2940 E. Las Vegas St. Colorado Springs, CO 80906 719-392-1155 Fax: 719-390-9604

100 Barr Ave. SE Albuquerque, NM 87105 505-344-9466 Fax: 505-345-4715

2329 River Road Grand Junction, CO 81505 970-243-0722 Fax: 970-243-0726

8806 E. US Hwy. 34 Johnstown, CO 80534 970-669-6209 Fax: 970-669-6280

3251 MJB Road Casper, WY 82601 307-577-9700 Fax: 307-577-9703

3333 W. 2100 S. Salt Lake City, UT 84119 801-972-5588 Fax: 801-972-2215

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 11, 2017 • Page 61

A WIRTGEN GROUP COMPANY

Brand New Highway Class Paver SUPER 2000-3i.

CLOSE TO OUR CUSTOMERS TECHNICAL HIGHLIGHTS > High-performance paver for use in highway

> Ergo Plus 3 for easy paver operation > Daily maintenance-free paver with large fuel tank

construction and large-scale commercial applications

for a day’s work or more

> Multiple screed options including front or rear extensions or a high-compaction screed for placing stiff mixes and base materials

www.wirtgen-group.com/america

WIRTGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · Telephone: 615-501-0600 KIRBY-SMITH MACHINERY INC. www.kirby-smith.com

NUECES POWER EQUIPMENT

MODERN MACHINERY www.modernmachinery.com

www.nuecespower.com

6715 W. Reno Oklahoma City, OK 800-375-3339 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600

Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000

Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066 Houston, TX 713-247-0066

KOMATSU SOUTHWEST

HONNEN EQUIPMENT CO. www.honnen.com

ROAD MACHINERY www.roadmachinery.com

www.komatsusw.com Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811

Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589

6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383 Farmington, NM 505-324-8601 Carlsbad, NM 575-628-8301 El Paso, TX 915-872-1001

5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441

Ogden, UT 801-627-0049 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681

Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 661-824-2319

Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540

Page 62 • June 11, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years 2005 Blaw Knox PF 3200 paver, Omni IIIA 10-18 ½ ft screed w/diesel heat, power crown and slope, Cummins 5.9L diesel engine, power auger tunnels

2012 Volvo DD25W double drum 47” vibratory roller, double drum drive, hydrostatic drive, Kubota diesel engine, water system

2005 Rosco Maximizer 3 distributor, 1750 gallons, EZ-3S computer w/1 ft cut-offs, propane heat, 8-16 ft extending spray bar, Freightliner FC-80 Cargo cabover, Cummins diesel engine, auto trans

2011 Laymor 8HC broom, tow hitch, Kubota diesel engine, 8 ft broom, 820 hrs

2009 Hamm HD120HV double drum 78” high frequency vibratory roller, J.D. diesel engine, water system

New Marathon TPS250T tack distributor, Honda 5.5hp gas engine, 10GPM pump, 250 gallons, 5 ft spray wand New Warren rock tailgate spreader, 8 ft wide max w/40 ft hose, 10" filler lid, hose reel, propane burners, spreading with 1 ft gates, gravity feed, operator’s flushing system, electric brakes (some w/spray bars) platform

TEXTING AND DRIVING MAKES GOOD PEOPLE LOOK BAD. STOPTEXTSSTOPWRECKS.ORG

2010 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, Cat C7 diesel engine, power crown, New Marathon HEPR36 infrared heater, 3 ft x 3 ft walk slope & height, spray down hose & reel, self lubing behind, propane heat system, power auger tunnels, front wheel assist

3517 Wayne White Rd., Climax, NC 27233

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 11, 2017 • Page 63

MT-300

690-G

1550-D

Products shown with optional equipment.

MAULDIN Paving Products is dedicated to developing products that exceed expectations. See for yourself what makes the industry’s heaviest screed lay down the Superior mats your company desires. With over 10 years under the belt of proven results, the Silver-16 Screed is better than ever.

MAULDIN Paving Products... MASTERS OF THE MAT! Contact your MAULDIN dealership today and review all the choices available from the MAULDIN 1750-C 2I¿ FLDO &DWDORJ WR VSHF RXW D & WKDW SHUIHFWO\ PDWFKHV \RXU SDYLQJ SUHIHUHQFHV

Golden Equipment Company www.goldenequipment.com 721 Candelaria Rd NE Albuquerque, NM 87107 (505) 345-7811

1150 Madison Lane Farmington, NM 87401 (505) 326-1413

29268 Hwy 160 Durango, CO 81303 (970) 247-8830

Page 64 • June 11, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511 866/796-3211

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 Tulsa, OK 800/375-3733

C o m m i t t e d t o Q u a l i t y . C o m m i t t e d t o Yo u .

Kansas City, KS 877/851-5729

Th roug h out th e w orld , th e L e e Boy b r a n d r epr es en t s qu a lit y a n d d epen d a b le e q uip me nt th at c ontinue s to m a xim iz e pr od u ct iv it y , d eliv er pr ofit a b ilit y a n d p rovid e assuranc nc e to our d e aler s a n d en d u s er s a lik e .

ROMCO EQUIPMENT CO.

A SPHALT PA PAVERS S

www.romco.com Austin, TX 512/388-2529 877/851-1026 Buffalo, TX 903/322-5602

1000

5300

6150

7000 0

8500

8510 510

8 8515

8520

861 6

8816

Dallas, TX 214/819-4100 800/227-6626 Ft. Worth, TX 817/626-2288 866/966-4602

FORCE FEED LOADER

MOTOR GRADERS S

ROLL ERS

Longview, TX 903/758-5576 San Antonio, TX 210/648-4600 800/966-4601

685

695

3000

TACK TANKS

400 0

420

MAINT TAINER

For more information, visit sit

www.LeeBoy.com Manufactured in the USA SA

150

250

500

1200 0

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • June 11, 2017 • Page 65

RDO EQUIPMENT CO. www.rdoequipment.com Riverside, CA 800/494-4863

New Braunfels, TX 800/880-0880

Indio, CA 760/342-8900

Chandler, AZ 602/845-1800

Imperial, CA 800/464-4331

Ehrenberg, AZ 928/923-9611

Lakeside, CA 619/270-4300

Flagstaff, AZ 928/526-0639

Fort Worth, TX 800/551-4905

Phoenix, AZ 602/415-4700

Hewitt, TX 800/551-8258

Prescott, AZ 928/776-8300

Irving, TX 800/437-6342

Tucson, AZ 520/294-5262

Laredo, TX 956/718-1909

Wellton, AZ 928/785-4276

McKinney, TX 214/856-4899

Yuma, AZ 928/341-7100

Pflugerville, TX 512/272-4141

POWER MOTIVE CORP. www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 303/355-5900 Grand Junction, CO 970/241-1550 Colorado Springs, CO 719-576-5541

Milliken, CO 970/587-1188 Durango, CO 970/259-0455 Cheyenne, WY 307/634-5149

KOMATSU EQUIPMENT CO. www.komatsueq.com 1486 S. Distribution Drive Salt Lake City, UT 84104 801/972-3660 Fax: 801/954-0936 4460 Pioneer Way Elko, NV 89801 775/753-7557 3825 Losee Road North Las Vegas, NV 89030 702/399-1004

900 Marietta Way Sparks, NV 89431 775/356-1334 1409 East 3850 South St. George, UT 84790 435/986-1000 405 Jonah Drive Rock Springs, WY 82901 307/686-1300

FOUR SEASONS EQUIPMENT www.fourseasons-equip.com 8111 Mills Road Houston, TX 77064 800-234-5007 281-807-9777

5524 West Ledbetter Drive Dallas, TX 75236 866-270-1700 214-388-1700

www.sakaiamerica.com (800) 323-0535

Page 66 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 12-13 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 12-13 DH Call McLaren 888-492-4230

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 12-13 DH Call McLaren 888-492-4230

Serving the Construction Industry Since 1989 Trench Shoring - Confined Space - Pipe Plugs Rentals - Sales - Service 12-13 PK 800-828-8505

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

CLASSIFIEDS

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states .............................................................Call

For more information, call Construction Equipment Guide today at

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us

800/523-2200

11-12 TM

eXCAVAtors

LoADers

trAILers

'05 Komatsu PC160 LC-7 Cab/AC, 16' Boom, 8'6'' Arm, 23.5 Shoes, 6,500 hours........ .................................. $79,500.

1997 Case 580L, OROPS, 2WD, 24'' Bucket, 3 Stick controls, 11 L x 16.5L-F-3 Front tires, 19.5L x 24 Rear tires, 4 Cyl. Case Eng, 5,297 hrs........ .................................. $17,500.

'04 Komatsu PC300 LC-7 Cab/AC, 33.5 Tracks, 13' Arm, JRB QC, Aux Hyd, 8,600 hrs.. .................................. $99,500.

2015 Big Tex Dump, Stk #10249, 25,900 lbs, GVWR, Net Pay Load, 17,340 lbs, 48'' Spread Axle, 20ft L / 4ft Walls, 7'9'' W, folding rear gate, w/ heavy duty ramps, D rings inside trailer, ST235/85R16 Ries, Front tool box.. $14,500.

Hendrix Machinery, LLC 1-936-327-5430

Hydraulic excavators

trenCHIng eQUIPMent Vermeer Model# V120 Rock Saw with wheel attachment (1,551 hours)

2013 John Deere 17DX, OROPS, Aux Hyd, Front blade, 1,071 hours.............. $19,500.

OEM Tracks, Stk# 9762, New original excavator tracks, 28'' Pads, 49 Links, 190MM pitch, Cat, Komatsu, Hitachi, Volvo, Kobelco, Case, Link-Belt and others.......................... $7,500.

Hendrix Machinery, LLC 1-936-327-5430

Call 949-833-3222 Ext 108

Mini excavators

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 ®

Next Issue Closes June 11th DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?

Vermeer Model# RTX 1250 Rock Saw with wheel attachment (634 hours)

$40

ONLY

Construction Equipment Guide is THE Place to List It!

Hendrix Machinery, LLC 1-936-327-5430

rUBBer trACKs

Road Builders Machinery & Supply Co., Inc. 866-485-7180

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 12-13 EB

2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.

Call 800-523-2200

or go online to place your ad

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 67

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: STEEL END DUMP TRAILER OLDER MODEL 25 TO 35 FT END DUMP TRAILER STEEL TANDEM OR TRI, USED CONDITION FINE CONTACT: CHRIS BAREFOOT (PH: 919-622-0160) EMAIL: TLCWORKSINC@GMAIL.COM FAX: 919-207-0571 –––––––––––––––––––––––––––––––– WANTED: APE 200-6 APE 200-6 – VIBRATORY HAMMER AND POWERPACK WITH 11’ CASSION BEAM APPROX. WITH DUAL CLAMPS TO INSTALL AND EXTRACT ROUND STEEL CASING CONTACT: COLLEEN DOUTY (PH: 214-226-6867) EMAIL: CDOUTY@OVERLANDCORPORATION.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER WANT TO BUY BULLDOZER- KOMASTU 375A 3 AND 475A 3 WITH RIPPER, 1996 TO 2005 RUN OR PIECES MUST BE UNADVERTISED PLEASE CONTACT: JEAN MAURICE BOUTIN (PH: 450-346 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: USED PORTABLE ASTEC ASPHALT PLANT YEAR MODEL 2000 OR NEWER ASTEC, 300 TON PORTABLE DRUM MIX ASPHALT PLANT - PORTABLE FIVE BIN COLD FEED SYSTEM - PORTABLE RAP SYSTEM - PORTABLE SELF-ERECTING SILO USED SURGE SYSTEM (ASPHALT SILOS) - 2 -200 TON SILOS - TRAVERSE CONVEYOR - 36’ DRAG SLAT CONVEYOR - 100’ TRUCK SCALES CONTACT: COLLEEN DOUTY (PH: 214-226-6867) EMAIL: CDOUTY@ OVERLANDCORPORATION.COM FAX: 214-226-6867 –––––––––––––––––––––––––––––––– WANTED: NEEDED BÙLLDOZER NEEDED BULLDOZER KOMATSU 275,375,475 ENC CAB WITH RIPPER 2012 USA LOCATION MUST NE UNADVERTISED PLEASE CONTACT: JEAN MAURICE BOUTIN (PH: 450-346-8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 410 BACKHOE CASE 580 BACKHOE 1998 TO 2007 CONTACT: ROGER PH: 810-845-4540 EMAIL: RSTUDLEY@COMCAST.NET FAX: 810-845-4540 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER NEEDED USA LOCATION BULLDOZER KOMASTU 2014 AND UP 155 275 375. 475 ENV WITH RIPPER D10N D10R D10T D11N D11R D11T ENC ÇAB WITH RIPPER OR REPOSSES BANK OR LIEN CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA ––––––––––––––––––––––––––––––––

WANTED: INTERNATIONAL TD20C DOZER & INTERNATIONAL 250E LOADER RUNNING OR NOT, FOR PARTS! CONTACT: ALBERT HARLOW (PH: 267-738-5984) –––––––––––––––––––––––––––––––– WANTED: FORGING PRESSES LOOKING FOR FORGING PRESSES, 1350 TON, 1600 TON AND 2500 TO 4000 TON ALL MECHANICAL CONTACT: HERB KAISER (PH: 248-680-1000) EMAIL: HERB@GIBBSIND.COM –––––––––––––––––––––––––––––––– WANTED: 2 CATERPILLAR 740B ARTIC TRUCKS LATER MODEL, MAX 5000 HOURS, USA LOCATION CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 615 DIFF LOCK ASSEMBLY 615 PART #9V1761 FOR EVERYTHING, BOLTS TO SIDE OF CARRIER, RING PINION SHAPE DOES NOT MATTER CONTACT: DONNIE CHENEY (PH: 229-881-0751) EMAIL: DONNIECHENEY@YAHOO.COM FAX: 229-849-2191 –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR LATE MODEL BACKHOE ASAP IN TEXAS I'M LOOKING FOR 2000-2010 COMPLETE BACKHOE ASAP! PLEASE AUCTION PRICES ONLY. I'M A DEALER SO NO RETAIL, I'M LOOKING TO PURCHASE IN QTY IF THE PRICE IS RIGHT. LOOKING FOR UNITS IN THE TEXAS AREA IF POSSIBLE. I HAVE CASH TODAY!! NOTE: CAN BE IN WORKING OR NON WORKING CONDITION. CONTACT: MATTHEW (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 WANTED TO BUY HITACHI EX200, EX200-1, EX270, EX400 AND EX400-1. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 140G, 140H RUNNING OR NON-RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: RUNNING OR NON RUNNING MACHINES!!!! CAT WHEEL LOADER 936, 950, 950B, 950E, 950F, 966D, 966E, 966F AND 966G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM (PH: 713-855-6170) EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 ––––––––––––––––––––––––––––––––

WANTED: 2002-2005 VERMEER HG 365 GRINDER PARTS UNIT I AM LOOKING FOR A 2002-2005 VERMEER HG 365 GRINDER UNIT FOR PARTS ONLY. I HAVE A COUPLE OF UNITS I'M LOOKING TO PUT TOGETHER. I'M A SERIOUS BUYER AND LOOKING TO ACT FAST. DOESN'T MATTER WHAT'S WRONG, DON'T CARE ABOUT THE HOURS. CONTACT: JAMES (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: GP 7.5 CUBIC YARD BUCKET FOR CAT 980G/H/K WE ARE LOOKING FOR CAT 980G/H/K 7.5 CUBIC YARD GP BUCKET WITH BOE (BUCKET ONLY). OTHER MAKES OF THE SAME SIZE BUCKET ARE ACCEPTABLE. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. CONTACT: ROY FOLLICK (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL 260A BACKHOE ANY CONDITION CONTACT: RUDY (PH: 732-921-1314) EMAIL: CRUTILITIES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: HYDRAULIC PUMP FOR 2700 Q LINK BELT CONTACT: TONY STEFFES PH: 414-651-7336 EMAIL: STEFFESANTHONY@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LINKBELT CRANES LINKBELT MODEL 48A OR LS68, LS78, LS 98, OR LS108. OPERATING OR PARTS MACHINES CONTACT: WILLIAM TAYLOR PH: 609-868-0326 EMAIL: TAYLORSCRANESERVICE@GMAIL.COM FAX: 856-468-5742 –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDING TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION, IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM ––––––––––––––––––––––––––––––––

WANTED: FORD BACKHOE 455C I AM LOOKING FOR A TECHNICIAN FAMILIAR WITH THE ENTIRE ELECTRICAL SYSTEM OF A FORD BACKHOE 455C. THE MACHINE IS LOCATED IN CONSHOHOCKEN, 19428 CONTACT: JON NEVE PH: 610-828-9869 EMAIL: JAMESJNEVEINC@GMAIL.COM FAX: 610-828-0382 –––––––––––––––––––––––––––––––– WANTED: HORIZONTAL DIRECTIONAL DRILLS I AM CURRENTLY LOOKING TO PURCHASE HDD UNITS ASAP! ANYWHERE IN THE U.S. CAN BE WORKING OR BROKEN. MUST HAVE LOW MILES AND RODS AND BASKET MUST BE IN PLACE. I WILL PAY FOR SHIPPING. MUST HAVE FULL SPECS AND PHOTOS READY. CONTACT: MATTHEW STEVENSON PH: 346-230-4485 EMAIL: MATT.TURBOWELDINGSVC@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: DRESSER TD 20 G W/EROPS DOZER WITH NO MORE THAN 5000 HRS. SEMI-I BLADE PREFERRED. CONTACT: RANDY MYERS PH: 785-948-2231 EMAIL: RANTAW@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BUCKETS FOR 322/325 CAT EXCAVATORS EXCAVATOR BUCKETS CAT 322/325 WITH 80MM PINS CONTACT: KEN PH: 330-219-1003 EMAIL: KRV8815@MSN.COM –––––––––––––––––––––––––––––––– WANTED: ATTACHMENTS INTERNATIONAL WANTED TO BUY ATTACHMENTS INTERNATIONAL SEVERE SERVICE DEMOLITION GRAPPLES FOR 46-62,000 WEIGHT EXCAVATOR. WOULD CONSIDER LABOUNTY. PHOTO AND PRICE PLEASE. CONTACT: AMIE PH: 218-863-6444 EMAIL: AMIE@ATTACHMENTSINTL.COM ––––––––––––––––––––––––––––––––

WANTED: LARGE SAND OR MASS EXCAVATING BUCKETS WANTED TO BUY LARGE SAND OR MASS EXCAVATING BUCKETS. PREFER ATTACHMENTS INTERNATIONAL OR EMPIRE. MUST BE REBUILDABLE. PHOTO AND PRICE PLEASE. CONTACT: SHANA PH: 218-863-6445 EMAIL: SHANA@ATTACHMENTSINTL.COM –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT MANUALS BUYING NEW OR USED CONSTRUCTION AND AGRICULTURE SERVICE, PARTS AND OPERATOR MANUALS. EQUIPMENT DEALERS & PRIVATE COMPANIES, IF YOU HAVE MANUALS JUST SITTING ON THE SHELF AND YOU NO LONGER NEED THEM, PLEASE GIVE ME A CALL OR EMAIL. I BUY LARGE AND SMALL LOTS. JOHN DEERE CAT, KOMATSU, CASE, NEW HOLLAND, VOLVO, DOOSAN AND SO ON. CONTACT: JOHN WHITNEY PH: 530-864-0771 EMAIL: WHITNEYJ65@YAHOO.COM FAX: 530-864-0771 –––––––––––––––––––––––––––––––– YANMAR MODEL 55R TRACK CARRIER/DUMP -LOOKING FOR A MACHINE FOR PARTS -CAN BE BURNT OR WRECKED. CONTACT: TIM LEWANDOWSKI (PH: 724-640-4396) EMAIL: LEWEQUIP.BRANDON@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LATE MODEL TANDEM AXLE MACK DUMP CONTACT: CHRIS MCPHILLIPS (PH: 610-8647529) EMAIL: MCPHILLIPSCJ@AOL.COM FAX: 610-7893076 –––––––––––––––––––––––––––––––– WANTED: AT 422 GROVE CRANE TRANSMISSION CONVERTER AND TRANSMISSION CASE (COMPLETE WITH ALL GEARS) FOR A 1989 GROVE AT-422 CRANE. SERIAL #69502, MODEL 4425 G CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 –––––––––––––––––––––––––––––––– WANTED: USED SWINGER 200/220 REAR AXLE USED SWINGER 200/220 REAR AXLE. DANA MODEL 60 OR 70 TRAC LOCK AXLE CONTACT: GERRY (PH: 218-863-6445) EMAIL: ATTINTL@LORETEL.NET –––––––––––––––––––––––––––––––– WANTED: BOBCAT 863 LOOKING FOR A LOW HOURS MACHINE, HYD STABILIZER A PLUS. CONTACT: WILLIAM TEETERS PH: 715-563-7162 EMAIL: BILLT_54726@YAHOO.COM FAX: 715-563-7162 –––––––––––––––––––––––––––––––– WANTED: CASE 1150C DOZER 34X6 PYRAMID SHOES NEED 2 SOME CALL THEM ATEX SHOES. CONTACT: DAVID RESTER PH: 901-490-8888 EMAIL: HIGHFLYR@BELLSOUTH.NET FAX: 731-635-3366 ––––––––––––––––––––––––––––––––

WANTED: TRIAXLE ROAD TRACTOR DAY CAB TRIAXLE ROAD TRACTOR FOR HEAVY HAUL 240-250INCH WHEELBASE DOUBLE FRAME 500PLUS HP 18 SPEED DAY CAB 20K PUSHER NEWER NO RUST CONTACT: JOE PH: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED: 785 SKID STEER LOADER, NEW HOLLAND STOLEN FROM HARLAN MIDDLEBROOKS IN 2013 IN FLINTSTONE, GA. SERIAL NO. 820904. 1992 YR. HAD CLAM BUCKET ON IT. REWARD FOR INFORMATION. MAY BE IN TN, GA, OR KY. PLEASE HELP. THANK YOU. CONTACT: PAUL MIDDLEBROOKS PH: 423-580-5078 EMAIL: PAULMIDDLEBROOKS@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: RADIATOR FOR A LINKBELT 40 TON CRANE NEEDED, RADIATOR FOR A 1980 40 TON LINKBELT RT CRANE. MODEL # HSP8040 CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 –––––––––––––––––––––––––––––––– WANTED: TWIN 44 WASH PLANT, SAND LOOKING TO BUY USED TWIN 44 WASH PLANT FOR SAND. EMAIL PICTURES, DETAILS, PRICE AND LOCATION. CONTACT: MICHAEL BUHLER PH: 814-637-5599 EMAIL: NORTHSTARAGG@ WINDSTREAM.NET FAX: 814-637-5598 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADER 140G LOOKING FOR USED CONSTRUCTION EQUIPMENT IF YOU HAVE ANY OF THESE IN YOUR INVENTORY PLEASE CONTACT ME THROUGH EMAIL OR MY PERSONAL CELL NUMBER. BELOW IS MY REQUIRED MACHINERY LIST. WHEEL LOADER (CATERPILLAR), ROLLERS (DYNAPAC), MOTOR GRADERS (CATERPILLAR), EXCAVATORS (HITACHI). MODEL1. 930 2. 950B 3. 950E 4. 966F 5. 966F(II) 1. CA301 2. CA251 3. CA262 4. CA602 5. CA362 CONTACT: ILYAS KHAN PH: +923322489350 EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: JCB ROPS/FOPS CONTACT: ROBT. EMAIL: DEN_AYE@YAHOO.COM FAX: 215-757-3665 –––––––––––––––––––––––––––––––– WANTED: KOMATSU EXCAVATOR PC300-5 & PC300-6 WANTED TO BUY KOMATSU EXCAVATOR PC300-6 CONTACT: ABDAL PH: 415-687-0337 EMAIL: HAJICONSTRUCTEST@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 68 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Lexington, KY Wed., June 7, 2017 For: Liquidation. Crane, Construction Equipment & more • Cleveland, OH Thurs., June 8, 2017 For: Complete Liquidation Ag & Construction Equipment

BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat, June 10, 2017 For: Monthly Public Auction • Riverside, CA Fri, June 16, 2017 For: Monthly Public Auction • Portland, OR Fri, June 23, 2017 For: Monthly Public Auction

• Parkersburg, WV Sat., June 10, 2017 For: Rental Returns & Job Completion

• Sacramento, CA Sat., July 8, 2017 For: Monthly Public Auction

• Las Vegas, NV Sat., June 17, 2017 For: Very Large Rental Fleet Auction

• Portland, OR Sat., July 28, 2017 For: Monthly Public Auction

• Houston, TX Tues., June 20, 2017 For: Rental Fleet Construction Equipment & more

• Sacramento, CA Sat., August 12, 2017 For: Monthly Public Auction

• Lake Orion, MI Fri., June 23, 2017 For: Job Completion. Paving, Construction & more • Atlantic City, NJ Sat., June 24, 2017 For: Very Late Model Rental Returns • Queretaro, Mexico Fri., June 30, 2017 For: Late Model Earthmoving Equipment & more • Syracuse, NY Sat., July 15, 2017 For: Very Large Late Model Cat Rental Returns • Detroit, MI Sat., July 22, 2017 For: Retirement Auction • Rutland, VT Sat., July 29, 2017 For: Complete Liquidation Retirement Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Manassas, VA June 8, 2017 • Las Vegas, NV June 9, 2017 • Wasilla, AK June 10, 2017 • Atlanta, GA June 13, 2017 • Columbus, OH June 15, 2017 • Minneapolis, MN June 16, 2017 • Phoenix, AZ June 20, 2017 • Houston, TX June 21-22, 2017 • Nashville, TN June 22, 2017 • Kansas City, MO June 23, 2017 • Salt Lake City, UT June 27, 2017 • Raleigh-Durham, NC June 27, 2017 • Minneapolis, MN June 28, 2017 • Albuquerque, NM June 28, 2017 • St. Louis, MO June 29, 2017 • North Franklin, CT July 14, 2017 • Kansas City, MO July 18, 2017 • Fort Worth, TX July 19 - 20, 2017 • Albuquerque, NM July 25, 2017

• Portland, OR Fri., August 25, 2017 For: Monthly Public Auction BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Dallas (Anna), TX Fri., June 9, 2017 For: Construction Equipment BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY Thurs., June 8, 2017 • ONLINE ONLY Thurs., June 15, 2017 • ONLINE ONLY Thurs., June 22, 2017 • ONLINE ONLY Thurs., June 29, 2017 • ONLINE ONLY Thurs., July 6, 2017 • ONLINE ONLY Thurs., July 13, 2017 • ONLINE ONLY Thurs., August 3, 2017 • ONLINE ONLY Thurs., August 10, 2017 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY June 7, 2017 • ONLINE ONLY June 14, 2017 • ONLINE ONLY June 21, 2017 • ONLINE ONLY June 28, 2017 • ONLINE ONLY July 5, 2017 • ONLINE ONLY July 12, 2017 DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., June 24, 2017 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540

• Philadelphia, MS July 19 - 20, 2017 For: Huge 2-Day Public Auction • Philadelphia, MS September 12 - 13, 2017 For: Huge 2-Day Public Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Philadelphia, MS November 15 - 16, 2017 For: Huge 2-Day Public Auction DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Pendleton, IN Fri., June 16, 2017 For: 25th Annual Summer Auction EQUIPMENT MARKETERS & APPRAISERS www.equipmentmarketers.com 319-266-3578 • ONLINE ONLY Bids close June 20, 2017 For: Youngblut Contracting, Inc. HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 16, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., August 18, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., October 20, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., December 8, 2017 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY June 14, 2017 • ONLINE ONLY June 28, 2017 • ONLINE ONLY July 12, 2017 • ONLINE ONLY July 26, 2017 • ONLINE ONLY August 9, 2017 • ONLINE ONLY August 30, 2017 • ONLINE ONLY September 13, 2017 • ONLINE ONLY September 27, 2017 • ONLINE ONLY October 11, 2017 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Summersville, WV Wed., June 21, 2017 For: Complete Liquidation Mountain State Bridge Co. Inc. • Tamaqua, PA Wed., June 28, 2017 For: Surplus Liquidation Ankiewica Enterprises, Inc.

• Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225 • Sebring, FL Sat., July 15, 2017 For: Construction & Agricultural • Sebring, FL Sat., September 9, 2017 For: Construction & Agricultural • Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Portland, OR Thurs., June 8, 2017 For: Construction, Power line & Utility Fleet • Waxahachie, TX Thurs., June 15, 2017 For: Construction, Power line & Utility Fleet • ONLINE ONLY May 20 – June 16,, 2017 For: Construction, Power line & Utility Fleet & Equipment • Riviera Beach, FL Sat., June 17, 2017 For: Construction, Power line & Utility Fleet & Equipment • Plymouth Meeting, PA Thurs., June 24, 2017 For: Construction Equipment & Utility Fleet J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL June 13 - 15, 2017 For: 3 Day Trucks, Construction and Forestry JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kenmore, WA Sat., June 10, 2017 For: Heavy & Construction Equipment & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY June 1 - 7, 2017 For: Absolute Van Trailer Public Auction

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• ONLINE ONLY June 1 - 13, 2017 For: Monthly Government Public Auction

• Foley, MN Fri., June 9, 2017 For: Heavy Equipment, Truck & Trailer Auction

• Semmes, AL Sat., June 10, 2017 For: Seized Vehicle & Equipment Public Auction

• Stanton, TX Wed., June 21, 2017 For: Permian Basin Absolute Public Auction

• ONLINE ONLY Thurs., June 29, 2017 For: Truck & Trailer Auction

• ONLINE ONLY July 3 - 11, 2017 For: Monthly Government Public Auction

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

JENNINGS AUCTION GROUP www.jenningsauction.com 717-268-0020 • ONLINE ONLY Closes Weds, June 21, 2017 For: Spahr Retirement Auction, Electrical Contractor LLOYD MEEKINS & SONS AUCTION COMPANY www.meekinsauction.com 800-499-6560

• Lebanon, TN Sat., June 10, 2017 For: Construction Equipment • ONLINE ONLY Sat., July 15, 2017 For: Construction Equipment • Lebanon, TN Sat., September 9, 2017 For: Construction Equipment SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506

• Lumberton, NC Tues., June 20, 2017 For: Annual Summer Contractors Auction

• South Windsor, CT Sat., June 17, 2017 For: JDC Enterprises Liquidation Auction

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

• Pelzer, SC Thurs., June 22, 2017 For: Summer Contractors Auction

• West Fargo, ND Wed., July 26, 2017 For: Aglron West Fargo Multi Ring Event

McGREW EQUIPMENTCOMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., June 13, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., July 11, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., August 8, 2017 For: Tractor, Farm & Construction Equipment MOTLEYS ASSET DISPOSITION GROUP www.motleys.com 1-877-MOTLEYS • Richmond, VA Tues., June 13, 2017 For: Construction Equipment & Truck Auction NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322 • Wrentham, MA Sat., June 10, 2017 For: Major Heavy Equipment & Truck Sale PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., June 8, 2017 For: Construction Equipment • ONLINE ONLY Tues., June 13, 2017 For: Paving Retirement Auction • ONLINE ONLY Thurs., June 15, 2017 For: Truck & Trailer Auction • ONLINE ONLY Tues., June 20, 2017 For: OK Department of Wildlife Conservation Auction • ONLINE ONLY Thurs., June 22, 2017 For: Construction Equipment • ONLINE ONLY Tues., June 27, 2017 For: Primoris Aevenia Equipment Auction

RTI AUCTIONS www.teitsworth.com 585-243-1563 • NETAUCTION June 6 - 13, 2017 For: Equipment & Vehicles from municipalities, companies, etc. • Arkport, NY Thurs., June 8, 2017 For: Liquidation: Covered Wagon Train Inc. WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., June 10, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580 • York Springs, PA Fri., June 23, 2017 For: Southern PA Contractors Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., June 10, 2017 For: Construction Equipment & more YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Atlanta, GA Thurs., June 8, 2017 For: Heavy Equipment Auction • Ashland, OH Wed., June 21, 2017 For: Heavy Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 69

Page 70 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT.......................................................................... 11 ALLMAND BROTHERS INC................................................................... 39 AMULET...................................................................................................12 ATI CORPORATION................................................................................ 16 BARGAINS...............................................................................................66 BELL TRUCKS AMERICA INC................................................................29 BLANCHARD MACHINERY INC.............................................................16 BOMAG.................................................................................................... 60 CALDER BROTHERS CORPORATION................................................. 63 CASE CONSTRUCTION......................................................................... 15 CEG SCALE MODELS.............................................................................. 8 CEG WANTED.........................................................................................67 CHICAGO PNEUMATIC.......................................................................... 11 CLASSIFIEDS..........................................................................................66 COASTLINE EQUIPMENT...................................................................... 23 CONSTRUCTION EQUIPMENT GUIDE........................................... 69,28 DITCH WITCH WEST.........................................................................36,37 DOOSAN PORTABLE POWER.............................................................. 41 ECCO EQUIPMENT................................................................................ 24 ESCO CORP............................................................................................52 FLANGE LOCK........................................................................................ 13 HENDRIX MACHINERY LLC.................................................................... 3 HITACHI CONSTRUCTION MACHINERY............................................. 35 HYDREMA US INC.................................................................................. 25 HYUNDAI CONSTRUCTION EQUIPMENT...................................... 50,51 ICUEE - ASSOC OF EQUIPMENT MFRS..............................................34 IMPACT ROLLER TECHNOLOGY INC.................................................. 62 ISUZU DIESEL....................................................................................46,47 JCB INC.............................................................................................. 30,31 JFW EQUIPMENT INC............................................................................62 JOHN DEERE.......................................................................................... 17 JOHN DEERE SKID STEER...................................................................53 KOMATSU AMERICA CORP..............................................................54,55 LEEBOY................................................................................................... 64 LIEBHERR................................................................................................. 7 MINNICH MANUFACTURING.................................................................58 NPK CONSTRUCTION EQUIPMENT INC............................................. 72 ON THE ROAD TRUCKING....................................................................19 PIRTEK USA............................................................................................25

RANSOME EQUIPMENT SALES LLC/LRH........................................... 67 RITCHIE BROS. AUCTIONEERS........................................................... 71 ROAD BUILDERS MACHINERY & SUPPLY.......................................5,56 ROAD MACHINERY CO (PHOENIX)....................................................... 2 ROADTEC................................................................................................59 SAKAI AMERICA INC.............................................................................. 65 SANY AMERICA INC............................................................................... 23 SCOTT EQUIPMENT.............................................................................. 21 SEC EQUIPMENT CORP........................................................................16 SIMPSON AND SONS TRADING........................................................... 13 SULLAIR...................................................................................................49 SULLIVAN PALATEK............................................................................... 43 TAKEUCHI............................................................................................... 32 TOWMASTER INC................................................................................. 52 VOLVO CONSTRUCTION EQUIPMENT-NA............................................9 VOLVO FINANCIAL SERVICES................................................................6 WACKER NEUSON............................................................................26,27 WIRTGEN AMERICA...............................................................................61 YANMAR AMERICA CORP..................................................................... 33

PACIFIC NORTHWEST SUPPLEMENT ASV .......................................................................................................... 9 CASCADE ENGINE...................................................................................5 CONSTRUCTION EQUIPMENT GUIDE................................................ 10 FEENAUGHTY MACHINERY COMPANY.............................................. 11 MODERN MACHINERY............................................................................ 2 ORION EQUIPMENT...............................................................................12 PACWEST MACHINERY........................................................................3,7 TRIAD MACHINERY..................................................................................9

UTAH SUPPLEMENT CENTURY EQUIPMENT........................................................................... 3 CONSTRUCTION EQUIPMENT GUIDE.................................................11 HOWE RENTAL & SALES.......................................................................11 INTERMOUNTAIN BOBCAT..................................................................... 7 KOMATSU EQUIPMENT CO.................................................................... 2 MESCO...................................................................................................... 5 RASMUSSEN EQUIPMENT CO...............................................................9 WHEELER CAT....................................................................................... 12

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 11, 2017 • Page 71

Unrreserv rvved ed public equipment auctions

CR AN ES

Fast, fleexxible financing fi avai vailable – up to 100%, 0%, $0 down do

2013 Manitowoc 16000 440 Ton Ton Self-Erecting | Houston

2012 Vo Volvo G94 40B | Houston

2012 Caterpillar D5K2 XL | Houston

2013 Vo Volvo EC220DL | Phoenix

Volvo G730B B|P Phoenix

2 – 2012 Vo Volvvo o L90G | Phoenix

4 – Caterpillar 345BL | Salt Lake City

2013 Vo Volvo EC220DL | Salt Lake City

Caterpillar D6M LGP | Salt Lake City

42,100+ items in 120+ auctions including Atlanta, GA Columbus, OH Phoenix, AZ Houston, TX Nashville, TN Kansas City, MO Saltt Lak Lake City, UT

*Jun 13 Jun 15 Jun 20 Jun 21–22 Jun 22 Jun 23 Jun 27

Raleigh-Durham, NC Minneapolis, MN St. Louis, MO North Fran ranklin, CT Kansas City, MO Albuquerque, NM

Jun 27 Jun 28 Jun 29 Jul 14 Jul 18 *Jul 25

*Dates subjectt tto change

Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Firm #2389, Auctioneer Eddie R. Graham #2237, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Motor Vehicle Dealer License #DLR25867, Auctioneer John L. Korrey # 7016005, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889 OAC. Terms & conditions apply. See rbauction.com

Bid in person or online ▸ No minimum bids or reserve prices ▸ Te Testt and inspectt on-site on▸ Open to the public, free registration

More items added daily Call about selling: 1.800.211.3983

See fu full auction & equipment listing gss at rbauction.com

Page 72 • June 11, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE