West 11 May 24, 2017 by Construction Equipment Guide

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Western Edition

www.constructionequipmentguide.com

May 28, 2017 • Vol. IX • No. 11 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Inside

ART Project Speeds Ahead on Old Route 66 By Chuck Harvey CEG CORRESPONDENT

Ditch W itch of Arizona Reaches Milestone…8

Fir m Adopts Pitbull to Help W ith Aggre gates…33

A $119 million Albuquerque Rapid Transit (ART) project will culminate with an 8.8-mi. electric-powered bus line with 20 stations on Central Avenue, formerly a portion of Route 66 that runs through New Mexico’s largest city. The project is under way and the new rapid transit system is expected to open in fall of this year. The city of Albuquerque and existing bus system ABQ RIDE, operator of Rapid Ride, are heading up the project, which also includes major upgrades to the streetscape and roadway including creation of bus-only lanes. Along with transit, ART will provide a walk-friendly corridor to connect neighborhoods, job centers, schools, entertainment venues and public spaces. Urbanabq.com photo The ART system will feature 18 buses 60 ft. The project is under way and the new in length. rapid transit system is expected to open in Most of the money for the project is from fed- fall of this year. eral sources including $69 million from the Federal Transit Administration’s Small Starts ART photo Capital Grant Program. Local matching funds Shown at right, the ART bus system will covered the remainder of the cost. bring numerous changes to Central Avenue see TRANSIT page 32

Metso Welcomes PacWest t o Dealer Networ k…40

Table of Contents................ 4 Attachment Section.... 11-13 Truck & Trailer Section........ ...................................... 29-31 Recycling Section........ 33-42 Auction Section.......... 45-51 Business Calendar............ 49 Advertisers Index.............. 50

including canopy-covered bus stations.

Houston Set for $3B Water Supply Pipeline By Dylan Baddour HOUSTON CHRONICLE

HOUSTON (AP) Any Houstonian who’s ever stalled out in a rush-hour gully washer, swatted mosquitoes on a humid summer afternoon or hauled soggy carpet to the curb after a neighborhood flash flood will be forgiven for thinking the supply of water is one thing they needn’t worry about. The Houston Chronicle reports indeed, throughout the city’s first century, the settlers and entrepreneurs who settled here tapped into generous underground stores of water to flood rice fields or run refineries. In 1939, government

scientists reassured residents the local water table should be fine even if average pumpage should reach 50 million gal. daily. But the decades kept passing, the city kept growing and the wells kept multiplying. Officials watched the level of the water underground steadily drop as daily pumpage at times exceeded 450 million gal. Regional aquifers were depleted as millions of people and businesses drilled ever deeper. Subsidence problems were documented, and experts came to recognize the supply could not keep pace with demand. Now, after decades of public meetings and engineering consul-

tations, environmental-impact studies and design proposals, a solution is in the works on a massive scale: a $3 billion, three-part chain of infrastructure projects to carry water more than 40 mi. westward from the Trinity River and provide a lifeline to the northern region and burgeoning suburbs from Spring to Tomball to Katy. The undertaking involves moving water 3 mi. over a ridge and into a 23-mi. canal that will feed Lake Houston. Due to a five-fold expansion of the water treatment plant there, the water will be pumped through 17 mi. of pipe large enough to drive a car through.

The construction and related work should employ about 2,500 people, according to estimates from the city and the builder of the canal. “It’s the biggest water project in the country right now,” said Michael Bloom, a manager at R.G. Miller Engineers. “It’s a worldclass project, really visible if you’re in the water sphere.” Other planners said the local project could be the largest water job under way in the world. It is bigger than any other included in a recent report on infrastructure investment authored by the international engineering firm AECOM see PIPELINE page 24

Page 2 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

APA PACIT Y AN NT N TAGE

UP TO

47 %* *

Compared to GMK5150 competition

adius with maximum counterweight

NEW W GMK5150 and GMK5150L

AN NYWHERE. The h strength e h and d mobility bili to handle h dl more jobs. j s. The new w GMK5150 and GMK5150L 150L deliver great ROI due to outstand ding lifting capacitiess and greater jobsite j accessibility.

liftting capacities in oun nterweight configurations GMK5150L High-per -performing boom capable of lifting g 11,6 t with 60 m boom — ideal forr tower crane rigging GMK5150 with 51 m boom

•150 t maximum capacity •Narrow w 2, 2 75 m width on 445/95R25 /95R25 tires •Fuel-effi fficient single -engine d design

Compact p dimensions sions with reduced overall length ength and width

Impressiive lifting, jobsite man neuverability and fuell efficiency help you u achiev hi e greater profi fits. fi

Crane Control System y (CCS) with Boom Configurator ator enhances operator controll and efficiency

Contact your local Grove dealler, or go to www.manitowoccranes.com i m to learn more.

Easy operator access ccess on the crane for secure, fast riigging; especially when working att heights

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

H&E Equipment Services

www.kirby-smith.com

www.wpcrane.com

HE-equipment.com

Oklahoma City, OK 800-375-3339 Tulsa, OK 800-375-3733 Kansas City, KS 877-851-5729 St. Louis, MO 866-279-1392

6720 Arctic Blvd. 8600 Calabash Ave. 19602 60th Avenue NE Anchorage, AK 99518 Arlington, WA 98223 Fontana, CA 92335 855-342-7263 253-254-7950 562-286-6618 3521 Alken Street Fax: 909-356-1340 91-210 Kalaeloa Blvd. Bakersfield, CA 93308 Kapolei, HI 96707 275 W. Larch Road 855-927-2637 808-682-7263 Tracy, CA 95304 209-597-3824

Belgrade, MT 406-388-2308 Billings, MT 406-259-9720 Boise, ID 208-388-3323 Salt Lake City, UT 801-974-0388

St. George, UT 435-674-2994 Las Vegas, NV 702-320-6500 Phoenix, AZ 602-232-0600 Tucson, AZ 520-770-1120

Albuquerque, NM 505-764-8100 Dallas, TX 972-986-0910 Houston, TX 713-433-6411

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 3

"In Business for over 33 Years" 2012 John Deere 310J, Stk#: 10677, EROPS, A/C, 4WD, 3,551 hrs., 24" Quick Connect Bucket, Extendahoe, Aux. Hyd., Pilot Controls, 12x16.5 Front, Tires, 19.5Lx24 Rear Tires.......... $39,500

www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2016 Dynapac CA1500D, Stk#: 10637, EROPS,

Se Habla A/C, 66" Smooth Drum, 4 hrs., Automatic Español Vibration Control, 100hp, Luxury Comfort Cab,

14.9x24 Tires, 4 Cyl. Deutz Eng.............$86,500

2011 John Deere 650J LGP, Stk#: 10712, 2011 John Deere 700J LGP, Stk#: 10424, OROPS, 6 Way Blade, 2,652 hrs., 80% U/C, 5 Pucket 3 Shank JD Ripper, 24" Pads, 10' 6" Wide OROPS, 6 Way Blade, 5,372 hrs., 80% U/C, 30" .............................................................. $66,500 Pads, 11 ft. Wide.................................. $69,500

Cat PA56 E00100E, Stk#: 9202, Winch with fair leads for D6T........................................ $16,500

2012 John Deere 310J, Stk#: 10683, OROPS, 4WD, 3,138 hrs., 24" Quick Connect Bucket, Extendahoe, Aux. Hyd., Pilot Controls, 12x16.5 Front Tires, 19.5Lx24 Front Tires.......... $36,500

OEM Tracks, Stk#: 9762, New Original Excavator Tracks: 28” Pad, 49 Links, 190MM Pitch, Cat, Komatsu, Hitachi, Volvo, Kobelco, Case, Linkbelt and Others........................ $7,500

1997 John Deere 310E, Stk#: 10727, OROPS, 2 WD, 5,693 hrs., 24" Bucket, Aux. Hyd., 2 Stick Controls, 11Lx16 Front Tires, 19.5Lx24R4 Rear Tires...................................................... $18,500

2011 JLG G9-43A, Stk#: 10687, 9,000 lbs., 43 ft., 6,247 hrs., 60" Forks, 74" Frame, Aux. Hyd., 13.00x24 Rubber Tires, 4 Cyl. Cummins Eng...... .............................................................. $36,500

1998 Massey Ferguson 383, Stk#: 10477, EROPS, A/C & Heat, 2,330 hrs., with 74" Bush Hog 2426QT Front End Loader S#12-02853, 2013 John Deere 35D, Stk#: 10651, EROPS, A/C & Heat, 810 hrs., Aux. Hyd., Push Blade...... P235 / 75Rx15 Front Tires, 18.4x30 Rear Tires, .............................................................. $32,500 4 Cyl. Perkins Eng................................. $14,500

1982 John Deere 670A, Stk#: 10700, EROPS, 4,638 hrs., 14 ft. M/B, Front Scarifier, 14.00x24 Tires, 6 Cyl. JD Eng............................... $21,500

2015 Big Tex Dump, Stk#: 10249, 25,900 lbs. GVWR, Net Pay Load 17,340 lbs., 48" Spread Axle, 2007 JLG 450A II, Stk#: 10635, 500 lbs., 45 ft., 20 ft. L / 4 ft. Walls, 7' 9" W, Folding Rear Gate 2,390 hrs., 33x15.50-16.5 Tires, 3 Cyl. Deutz w/Heavy Duty Ramps, D Rings Inside Trailer, ST235/85R16 Ries, Front Tool Box.......... $14,500 Eng.........................................................$21,500

1997 Case 580L, Stk#: 10711, OROPS, 2 WD, 5,297 hrs., 24" Bucket, 3 Stick Controls, 11Lx16.5L-F-3 Front Tires, 19.5Lx24 Rear Tires, 4 Cyl. Case Eng..................................... $17,500

1999 Sterling, L85, Stk#: 10521, A/C, 331,769 Miles, 11Rx24.5 Tires............................ $33,500

2016 Diamond FBS060C, Stk#: 10571, Mower, 60" Skid Steer Forestry Brush Cutter, 30-0524 Motor.................................................... $19,500

2011 Doosan G25E-5, Stk#: 10455, 4,600 lbs., 7 ft., 42" Forks, 45" Frame, 5,681 hrs., 7.00x15 Front and 6.50x10 Rear Hard Rubber Tires, Doosan DOHC, 16V Gas Eng................. $14,500

2015 Dynapac CA2500D, Stk#: HR-529, EROPS, A/C, 798 hrs., 84" Smooth Drum, Automatic Vibation Control, 550/60-22.5 Tires, Cummins Eng........................................................ $79,500

2006 JLG 400S, Stk#: 10288, 1,000 lbs., 40 ft., 2,617 hrs., 4WD, Vortec 4 Cyl. Gas Eng.$18,500

2014 Cat 246D, Stk#: 10639, EROPS, A/C, 312 hrs., 73" Bucket, Aux. Hyd., 12x16.5 Tires, 4 Cyl. Cat Eng........................................... $39,500

2014 John Deere 35D, Stk#: 10421, EROPS, A/C & Heat, 1,671 hrs., 12" Bucket, Front Blade, Aux. Hyd., 12" Rubber Tracks, Quick Coupler, 3 Cyl. YanMar Eng................................... $36,500

2005 Skytrack 6042, Stk#: 10682, 6,000 lbs., 42 ft., 4WD, 3,444 hrs., 48" Forks, 52" Frame, Aux. Hyd., 13.00x24 Foam Filled Tires, 4 Cyl. Cummins Eng....................................... $32,500

2005 JLG 800S, Stk#: 10709, 1,000 lbs., 80 ft., 1,909 hrs., 15x625 Tires, 4 Cyl. Deutz Eng......... .............................................................. $49,500

2011 Cat D6T XL, Stk#: HR-574, EROPS, A/C, Semi U Tilt Blade, 4,213 hrs., 24" Pads, 10' 7" Wide.................................................... $159,500

2008 Cat D6T LGP, Stk#: HR-538, EROPS, A/C, Sweeps, Rear Screen, St./Tilt Blade, 7,565 hrs., 2011 Komatsu D65PX-16, Stk#: HR-658, Paccar Winch S#0801742, 36" Pads, 13' 4" Wide EROPS, A/C, Heat, 3,995 hrs., Straight Blade w/ ............................................................ $129,500 Tilt, Engine Enclosures........................ $119,500

2015 Linkbelt 130LX3, HR-532, Stk#: EROPS, A/C, 1,674 hrs., 36" Digging Bucket, 24" Semi Triple Grouser Tracks, 15' 2" Boom, 8' 2" Standard Arm, Rear View Camera, 8' 6" Wide, 4 Cyl. Izuzu Eng....................................... $89,500

2014 Gyro-Trac GT35, Stk#: 10600, EROPS, A/C & Heat, 595 hrs., 28" Tracks, Gyro-Trac 700HFBBS Head (7' 7") S# E100, Rear Camera, 60% Tracks, 4 Cyl. Cummins Eng....... $129,500

2016 Kobelco SK210LC-9, Stk# HR-701, EROPS, A/C, FM Stereo, 14 hrs., 42" Bucket, 10'6" Wide, 32" Pads.......................... $146,500

2013 John Deere 850K WLT, Stk#: HR-745, EROPS, A/C & Heat, FM Stereo, 6 Way Blade, 5,764 hrs., Vall Ripper, 30" Pads, 13 ft. Wide...... ............................................................ $139,500

2012 John Deere 850K LT, Stk#: 10684, EROPS, 1996 Cat D350D, Stk#: 10703, EROPS, 19,310 1978 Dresta TD7E, Stk#: 10725, OROPS, A/C, FM Stereo, 6 Way Blade, 3,830 hrs., 23" hrs., 6x6, 26.5Rx25 Tires, 11 ft. Height, 40 ft. Sweeps, 6 Way Blade, 4,030 hrs., 17" Pads, 7" Pads, JD Ripper, Draw Bar, 24" Pads, 12' 2' Long, 11 ft. Wide.................................. $22,500 6" Wide.................................................. $16,500 Wide.................................................... $146,500

2008 Skytrak 10054, Stk#: 10707, 10,000 lbs., 2013 John Deere 17DX, Stk#: 10686, OROPS, 54 ft., 4WD, 3,544 hrs., 72" Forks, 62" Frame, 14x24 Tires, 4 Cyl. Cummins Eng......... $59,500 1,071 hrs., Aux. Hyd., Front Blade........ $19,500

2010 Ditch Witch RT45, Stk#: 10660, 813 hrs., 12" Trench, Slide Boom, 64" 6 Way Blade, 26 / 1200x12 Tires, 3 Cyl. Deutz Eng........... $18,500

Page 4 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

WESTERN EDITION Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES 8

DITCH WITCH OF ARIZONA REACHES REMODEL PROJECT MILESTONE

Ditch Witch of Arizona celebrated the completion of Phase 1 of its facility remodel with a customer appreciation event on May 12.

SPAGHETTI BOWL IMPROVEMENTS TO

8 20 KIRBY-SMITH PROMOTES JASON ROGERS TO

MOVE FORWARD The project will include improvements on a total of 10 service interchanges, one system to system interchange, braided/collector distributor systems and multiple local roads.

10 NEW MEXICO’S CONSTRUCTION INDUSTRY

SERVICE MANAGER, PIPELINE SERVICES As service manager of Kirby-Smith’s pipeline division, Rogers will support the needs of the equipment distributor’s customers throughout the United States.

20 KOBELCO EXPANDS DEALER NETWORK SALES TEAM

BOOMING IN 2017 The number of construction jobs statewide in March hit 46,000 — the highest since the middle of 2009.

Kobelco Construction Machinery USA continues to provide personal service through its nationwide dealer network with the addition of Cole Rudder, Southeast district business manager.

10 $400M NORTHERN COLORADO RESERVOIR

33 CONTRACTOR ADOPTS PITBULL TO HELP

The federal government gave final approval for a $400 million dam and reservoir in northern Colorado where 13 cities and water districts will store water from the other side of the Continental Divide.

14 AGING GOLF COURSE LOOKS TO

Wells Excavators is regularly tackling residential and commercial site work projects as well as road building and design build projects for septic systems and ponds.

46 JCB MACHINES PLAY IMPORTANT ROLE IN ‘ALIEN: COVENANT’

REMAIN COMPETITIVE Kaanapali Golf Course on Maui’s west coast has announced it will be modernizing its facilities to remain competitive as a resort destination.

16 SHAHEEN BEAUCHAMP BUILDERS LLC

A fleet of more than 20 JCB machines is playing a starring role in the latest installment of a cult film franchise.

RECYCLING SECTION

CLAIMS TWO SUMMIT AWARDS IN NEV. Shaheen Beauchamp Builders LLC claimed two Summit Awards at the 12th Annual Summit Awards Kentucky Derby Run for the Roses themed event held at Rancharrah in Reno on May 6.

16 VOTERS OVERWHELMINGLY APPROVE Three Montana cities have passed school bonds for construction, including a $125 million bond in Bozeman to build a new high school and remodel the current one.

34 TEREX FINLAY I-140 FEATURES ADVANCED CONTROL SYSTEM

Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Facebook

Twitter

40 SENNEBOGEN 8130 EQ HELPS RECYCLING COMPANY STAY AHEAD

42 FECON’S FTX128R FEATURES ATTACHMENT VERSATILITY

DEPARTMENTS 43 CLASSIFIEDS 48 COMING AUCTIONS 49 BUSINESS CALENDAR

EQUIPMENT 11 MANITOU Brush mower 12 HUSQVARNA Drum cutter

34 IROCK CRUSHERS LAUNCHES TS-518 MOBILE SCREENING PLANT

29 ISUZU FTR truck 30 THUNDER CREEK Diesel/DEF transfer tank

Kent Hogeboom

Dennis Hogeboom

Patrick Kiel

National Sales Manager

• Colorado• Louisiana • California • Oklahoma • Texas • New Mexico • Nevada • Arizona • Utah

• Idaho • Montana • Oregon • Washington • Wyoming

315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

www.constructionequipmentguide.com

Mobile

TO DEALER NETWORK

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

40 METSO WELCOMES PACWEST MACHINERY

11 JOHN DEERE Buckets

SCHOOL BONDS FOR NEW CONSTRUCTION

Edwin M. McKeon Sr. Dennis Hogeboom Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon

EXTERNAL POWER SUPPLY

33 CONTRACTOR ADOPTS PITBULL TO HELP WITH AGGREGATES

YouTube

602/679-8759 e-mail dennishogeboom@cegltd.com

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

38 MOBILE CONE CRUSHER CAN WORK WITH

WITH AGGREGATES

GETS FINAL APPROVAL

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 5

BANE MACHINERY, INC. 2449 Manana Rd. Dallas, TX 75220 214/352-2468 Fax: 214/353-2460 Tyler, TX 903-597-6641 Ft. Worth, TX 817/847-5894 www.banemachinery.com

BEE EQUIPMENT SALES LTD. 2506 Slaton Highway Lubbock, TX 79404 806/745-1511 Fax: 806/455-0543 www.beeequipmentsales.com

C. L. BOYD CO., INC. 4220 West Reno Ave. Oklahoma City, OK 73107 800/OKC-BOYD 405/942-8000 Fax: 405/945-8569 Ardmore, OK 866/720-2693 580/224-2693 Lawton, OK 800/633-2693 580/355-6667 www.clboyd.com

SCOTT EQUIPMENT 14635 Valley Blvd. Fontana, CA 92335 800/316-0327 Fax: 909/822-4850 www.scottequip.com

Page 6 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 40H Excavator w/green bucket, 1:50 Scale - $235

Tadano ATF 160G-5 All Terrain Crane, 1:50 Scale - $215

Caterpillar D400 Articulated Dump Truck, 1:50 Scale - $175

Volvo G690C Motor Grader, 1:50 Scale - $150

JCB 535-140 HiViz Telehandler, 1:50 Scale - $145

Terex TLB890 Backhoe/Loader, 1:50 Scale - $140

Allis Chalmers HD-21 Orange Dozer, 1:50 Scale - $130

Volvo L35G Wheel Loader, 1:50 Scale - $120

Liebherr LR632 Crawler Loader, 1:50 Scale - $120

Case 850C Angle/Tilt Dozer, 1:35 Scale - $100

Case 850B Angle/Tilt Dozer, 1:35 Scale - $100

Komatsu WA600 Wheel Loader, 1:50 Scale - $110

Mack Red,White & Blue Mixer Truck, 1:34 Scale - $100

Mack Red,White & Blue Dump Truck, 1:34 Scale - $100

Caterpillar 225 Crawler Crane w/Clamshell Bucket, 1:50 Scale - $75

Bobcat/Melroe 50th Anniversary Gold Skid Steer Loader, 1:25 Scale - $30

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 7

> ÊÕ

> ÕÃ ÃÊÌ `>Þ `> >Þ ÞttÊ ÀÀÞ Þ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

www ww w.R .RBused.com

Celeb brating tiing g our 30th Yea Year!!

2000 KOMATSU PC30MR-1, #5969, CAB/HEAT | BLADE | ROADLINERS | AUX HYD'S | 1,200 HRS ................................................................ $29,500

2008 KOMATSU PC78MR-6, #81717, CAB/AC | ROADLINERS | 8' ARM | HYD THUMB | 2,700 HRS..........................................................$79,500

2014 KOMATSU PC88MR-10, #92381, CAB/AC | 11'2" BOOM | 7' ARM | 18" SHOES | AUX HYD'S | QC| 2,100 HRS........................................ $89,500

2004 KOMATSU PC200 LC-7, #81536, CAB/AC | 31.5" SHOES | 9'7" ARM | HYD THUMB | 5,600 HRS........................................................$126,500

2006 KOMATSU PC220 LC-7, #92023, CAB/AC | 31.5" TRACKS | MECH THUMB | 6,300 HRS........ ................................................................ $79,500

2011 KOMATSU PC308US LC-3E0, #82416, CAB/AC | QC | 33.5" TRACKS | AUX HYD'S KOMTRAX | 4,400 HRS............ CALL FOR PRICE

2012 KOMATSU PC360 LC-10, #82876, CAB/AC | 33.5" TRACKS | 10' ARM | JRB QC | 5,000 HRS .................................................. CALL FOR PRICE

Page 8 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ditch Witch of Arizona Reaches Remodel Project Milestone The complete remodel, including sales and administrative offices, is due to be complete next year.

itch Witch of Arizona celebrated the completion of Phase 1 of its facility remodel with a customer appreciation event on May 12. Phase 1 included the service facility and washbay. The complete remodel is scheduled to be finished in 2018. The event was hosted by David and Beverly Klingaman, owners of Ditch Witch of Arizona. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG see EVENT page 28

Gerry Pierick (L), Ditch Witch of Arizona sales manager, catches up with Bill Coleman of the Coleman Advisor Group.

Longtime friends Larry Cox (L) of Sunstate Equipment and David Klingaman, Ditch Witch of Arizona, catch up during the event.

(L-R): William Smith and Billy Hopper of United Rentals talk with Ditch Witch of Arizona owner, Beverly Klingaman. Next generation? Klingaman grandchildren Lilly (L) and Eli just might have orange in their blood.

Bob Mayer (L) of Ditch Witch of Arizona and Cory Maker (R), Ditch Witch’s regional sales manager of the southwest, answered questions about the new SK850 mini-skid steer from Blooming Desert Landscaping’s K. Ross Oliver.

Gerry Pierick (L), sales manager of Ditch Witch of Arizona, meets up with Jerry Mangone of Sunstate Equipment.

Jerry Adams (C), retired former owner of Valley Rentals, congratulates David (L) and Beverly Klingaman on the completion of Phase 1 of their facility remodel.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 9

Spaghetti Bowl Improvements to Move Forward The Nevada Department of Transportation selected CH2M to provide environmental and preliminary design services to pave the way for reconstruction of the outdated I80/I-580/U.S. 395 system to system interchange in Reno to accommodate future travel demands. The project will include improvements on a total of 10 service interchanges, one system to system interchange, braided/collector distributor systems and multiple local roads. When complete, the improvements will accomplish long-term goals to meet 2040 travel demands, decrease congestion and improve safety. The Nevada Transportation Board, chaired by Gov. Brian Sandoval, along with the Regional Transportation Commission in Washoe County, identified reconstructing the nearly 50-year-old Reno Spaghetti Bowl, which carries more than 300,000 vehicles daily, as high-priority for the state. Due to the rapid growth in the region and the outdated design, the Spaghetti Bowl and adjacent interchanges often become congested, spiking an increase in accidents. To support the accelerated effort to update the interchange, CH2M’s environmental and preliminary design services will help NDOT reach its goals of: • accelerating delivery of the NEPA document for the project in less than three and a half years; • minimizing right-of-way displacements and acquisitions and utility impacts; • identifying project-specific risks; • developing a comprehensive stakeholder and public outreach plan. • improving safety, operations and mobility in Reno and surrounding areas; and • enhancing the aesthetics though the core of the community. “The Reno Spaghetti Bowl reconstruction is regionally significant, politically sensitive and technically complex,” said Susan Martinovich, CH2M North American highways and bridges practice leader. “We understand how to get these types of improvements built because we’re passionate about improving our world. In this case, we’ll not only improve the commute for Nevada drivers and visitors, but also make the environmental and preliminary design process quicker and easier for NDOT.” The I-80/I-580/U.S. 395 interchange reconstruction is not CH2M’s first technically challenging, time-critical NDOT project. Over the last eight years, CH2M played an integral role in expediting the National Environmental Policy Act and design process on Project NEON in Las Vegas, the largest public works project in Nevada history. The firm also is working with NDOT to support the state’s vision to develop a collaborative policy framework for continuing autonomous vehicle and connected vehicle initiatives, and further paving the way for a smooth and safe transportation future in the state. For more information, visit ch2m.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

THE

END IS NEAR

Time is running out. Don’t miss this opportunity to grab a Tier 3 Flex portable air compressor before they’re gone. Tier 3 units are still available from 750 to 1800 cfm, pressures up to 500 psi. In order to secure your Tier 3 Flex machine, orders must be placed prior to September 1st. Order now before it’s too late... All Tier 3 machines must be completed prior to December 31, 2017 LEARN MORE AT:

www.Sullivan-Palatek.com

(219) 874.2497

Page 10 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Mexico’s Construction Industry Booming in 2017 By Bruce Krasnow THE NEW MEXICAN

SANTA FE, N.M. (AP) With work under way on a Facebook data center in Los Lunas, a major rapid transit project in Albuquerque and hospitals and roads in Santa Fe, New Mexico’s construction industry is off to one of its best starts in years. The number of construction jobs statewide in March hit 46,000 — the highest since the middle of 2009. The jump from February employment represents an increase of 3.4 percent, the best gain in the United States, according to the U.S. Bureau of Labor Statistics. That’s nowhere near the peak for the state, which saw 60,000 industry jobs just before the recession in 2007-08, but March numbers are higher than the past few summers and the best in 90 months. With the state budget facing spending cuts, it’s too early to tell whether the trend will be enough to offset shortfalls in areas such as retail or manufacturing, but preliminary data show construction is helping the city of Santa Fe’s bottom line. Constructionrelated payments from the gross receipts tax are up 11 percent in fiscal year 2017 compared with the same period in 2016 — that’s a boost of $780,000. In the village of Los Lunas, construction is well under way on the new data storage

center for Facebook. The work so far is dirt moving, trenching and utility extensions, but this summer the first building of a million square feet will start to take shape, said Ralph Mims, director of economic development of the village. Over the next several years, the site will see anywhere from 200 to 1,000 construction workers a day. “If they go ahead and do all six buildings, we’re looking at nine years of construction,’’ Mims said. In Santa Fe, the city is seeing ongoing work at the new Presbyterian Healthcare medical center in Las Soleras as well as an expansion of Christus St. Vincent Regional Medical Center. Both sites have large cranes, something not seen in Santa Fe since completion of the New Mexico Rail Runner tunnel. Another high-profile project is a retirement center. Houston-based PinPoint Commercial is building The Legacy at Santa Fe with a total of 84 units offering a mix of limited assistance, traditional assisted living and memory care The facility also will house a restaurant, a movie theater, a general store, a gym and a library. The company has other facilities in Texas, Florida and Georgia. Another retirement complex was set to break ground this spring. The Place at Caja del Rio has been given full development approval by county commissioners with

plans to complete it in phases over five years. The initial phase will open in 2021 and, when completed, will have 180 units for independent living, 200 for assisted living, 120 skilled nursing beds and 80 units for memory care, according to information on file with Santa Fe County. The project is being developed by Cauwels & Stuve Construction of Albuquerque. Closer to downtown, Vital Consulting Group is installing concrete beams and approach slabs for the new underpass of the city’s Acequia Trail. The entire project is expected to be complete by the end of September and has its own Facebook page — AcequiaTrailUnderpass. The city also has started work replacing the narrow DeFouri Street bridge over the Santa Fe River. The $500,000 project will replace the span between West Alameda and Alto streets that was built in the late 1930s and reconstructed in 1959. That work continues through the summer and will require some traffic detours around the work zone just west of downtown. Homebuilding also is picking up in Santa Fe, said Kim Shanahan of the Santa Fe Area Home Builders Association. He said a project by the Pulte Group in Las Soleras is advancing quickly and will eventually have 300 homes. Pulte also recently purchased a tract of land for higher-end, single-family homes in Las Campanas, according to

Shanahan. Twilight Homes and Palo Duro are building new homes in Cielo Azul. Also on the south side, the Santa Fe Housing Trust and Homewise have more affordable projects moving forward. “We signed up 15 homes yesterday for the Parade of Homes,’’ Shanahan said of the annual new-home tour in which builders highlight their inventory. He expects if building continues at the current pace, the home tour will be bigger than last year. In Albuquerque, the city’s newest hotel opens next week in Old Town. The Hotel Chaco by Heritage Hotels is 118 rooms and five stories with a price tag of $40 million. Albuquerque also is in the middle of a bus and mass transit redevelopment project known as ART — Albuquerque Rapid Transit. The $120 million project, a headache for drivers and businesses, will include new buses, but construction spending alone is $86 million, said Joanie Griffin, project spokeswoman. “At any given time, there are 350 workers’’ on the project, she said. Many live in Albuquerque and can now work without having to travel, she added. “Everything is local except for the buses. Obviously, we don’t have bus manufacturers here.’’ (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

$400M Northern Colorado Reservoir Gets Final Approval By Dan Elliott ASSOCIATED PRESS

DENVER (AP) The federal government gave final approval for a $400 million dam and reservoir in northern Colorado where 13 cities and water districts will store water from the other side of the Continental Divide. The Army Corps of Engineers issued a permit for construction of the Chimney Hollow Reservoir in the foothills about 50 mi. north of Denver. The corps regulates some of the environmental impacts of big water projects. It is the last approval the reservoir needs, said Brian Werner, a spokesman for the Northern Colorado Water Conservancy District, which oversees the project. Construction could start in early 2019, after the district refines the plans, hires a project manager and awards contracts. Water for the reservoir would be pumped from the Windy Gap Reservoir on the Colorado River near the town of Granby, west of the Continental Divide, through an existing tunnel under the Rocky Mountains to the east side of the divide. The 13 water providers own the rights to the water but have nowhere to store it. The project is formally called the Windy Gap Firming Project because it would firm up the water supply. The Chimney Hollow Reservoir will store up to 90,000 acre-ft. One acre-foot can supply two typical households for a year.

New reservoirs are always contentious in Colorado. Water managers and urban planners argue the state needs more because it does not have the capacity to store all the water it is entitled to under agreements with other states. They also say Colorado needs more water for its growing population. Some conservationists oppose new reservoirs because of their environmental damage and because the state’s rivers are already overtaxed. “The Colorado River is on life support right now,” said Gary Wockner, director of Save the Colorado. “If the patient is bleeding out, you don’t cut open a new artery to try and heal it. Instead, you should work to protect and restore the river, not further drain it.” Wockner said his group will likely challenge the Corps of Engineers permit in court. Trout Unlimited negotiated some environmental improvements in the Colorado River near the Windy Gap Reservoir as part of the project. Mely Whiting, an attorney for the group, said she had not yet seen the final Corps of Engineers permit. Water providers that will pay for and benefit from the Chimney Hollow Reservoir are the cities of Broomfield, Erie, Greeley, Longmont, Louisville, Loveland, Superior, Evans, Lafayette and Fort Lupton, as well as the Central Weld County and Little Thompson water districts. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

SECTION

Attachments Pages 11-13

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

John Deere Loads Up on 30 New Bucket Configurations Designed to enhance productivity and efficiency, John Deere is debuting its enhanced production series buckets for the 744K-II, 824K-II and 844K-III wheel loader models. The enhanced production buckets offer several new features, including an improved bucket profile, integrated narrow spill guards, bushed static bucket pin joints and optional wear plating. “In speaking with wheel loader users in the field, they drove home the fact they wanted a bucket option that would increase production and offer greater efficiency in material retention,” said John Chesterman, product marketing manager, production class four-wheel drive loaders, John Deere Construction & Forestry. “We worked with our engineers to develop 30 configurations that improve loading and visibility; are easier and quicker to repair; and extend bucket life in all types of material.” When updating bucket design, John Deere added curved profile side cutters that improve material retention and allow for better bucket fill of loose material. Integrated narrow spill guards provide better visibility to the load so the operator can see when the bucket is full. This helps reduce loading time, fuel consumption and

number of loads on the machine, and protects wheel loader linkage. The enhanced production series buckets also feature bushed static bucket pin joints — a popular feature on the current 844K and 944K wheel loaders. These pin joints greatly reduce the need for welding and align boring for repair, enable repair in the field and greatly reduce maintenance time overall, according to the manufacturer. John Deere also is offering improved, optional wear plates to extend bucket life. Non-wear plate buckets are available with external cheek plates only and are ideal for non-abrasive materials. Wear plate buckets include external and internal cheek plates and wear liners on the floor. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

John Deere is debuting its enhanced production series buckets for the 744K-II, 824K-II and 844K-III wheel loader models. The enhanced production buckets offer several new features, including an improved bucket profile, integrated narrow spill guards, bushed static bucket pin joints and optional wear plating.

Manitou Unveils Edge Open Face Rotary Brush Mower Manitou Americas Inc. has added an Edge 72-in. (183 cm) open face rotary brush mower to its mower lineup for compact loader attachments. The Edge 72-in. open face rotary brush mower is designed to cut through thick brush and glide over rough terrain with ease. From heavy weeds, undergrowth, brush and small saplings up to 3 in. (7.6 cm) in diameter, the Edge open face rotary brush mower is ideal for clearing trails for horses, snowmobiles, skiing or biking in areas that would normally be inaccessible. The Edge 72-in. open face rotary mower features: • Open face design cuts vegetation before the frame pushes the material over

• Two 1⁄2 by 4 in. (1.3 by 10 cm high strength steel blades • Cut through brush and saplings up to 3 in. (7.6 cm) • Auxiliary hydraulic flow required is 18 to 30 gal. per minute (68 to 114 Lpm) • Balanced stump jumper for smooth operation The Edge 72-in. open face rotary brush mower comes complete with hoses and flat face couplers. This unit features a hydraulic motor requiring 18 to 30 gpm and is available in 72 in. (182.8 cm) for standard flow hydraulic flow systems. (This story also can be found on Construction Equipment Guide’s website at The Edge 72-in. open face rotary brush mower is designed to cut through thick brush and glide over rough terrain with ease. www.constructionequipmentguide.com.)

Page 12 • May 28, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Low Noise, Vibration…

Husqvarna Introduces New Quiet DC 200 Drum Cutter The Husqvarna DC 200 is a versatile attachment made for surface profiling rock or concrete, trenching, excavating frozen soil, soft rock excavation in quarries, demolition and dredging. The 56 tungsten carbidetipped picks on each side of the machine rotate and chip away at the surface material to the desired depth or complete removal. If the material is not completely removed, a smoother, more uniform surface results as well as smaller, finer grain sizes so material can be removed more easily or used as back fill without additional crushing. The DC 200 is suitable for use on restricted job sites and sensitive urban areas due to the low noise and low vibration levels, according to the manufacturer. Main Benefits • Versatile — for trenching, surface removal and profiling in rock, concrete or hard soil • Improved efficiency —software solution enables sufficient flow and pressure for max-

imum working efficiency and mobility • Low noise and vibrations — suitable for use in sensitive areas • Precise — produces an even surface and smaller grains Technical Specifications • Total width cutting head, in. (cm): 20 (50) • Diameter of cutter drum, in. (cm): 9 (24) • Number of picks: 56 • Max cutting force @ 5,075 psi, lbs. (kg): 2,835 (1,286) • Max torque @ 5,075 psi, lbs. (kg): 1,900 (862) • Max rock hardness, psi: 2,900 • Service weight, lbs. (kg): 441 (200) For more information, visit www.husqvarnacp.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 28, 2017 • Page 13

TRANSF F RMER. TM

THE NEW WA WA AY Y TO P PR CESS M MA ATERIAL TERIAL.

AY OU O

LU Group Inc. (800) 939-2558 usa@allu.net

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Page 14 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Why GEAX?

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • • • • •

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available

All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

• To work where others dare not go: narrow spaces, slopes, interiors of buildings, proximity to power lines. • To avoid wasting time and resources with an oversized machine.

• For ease of use and speed of set up. • For the compactness of the machine: saving on transport, fuel, maintanance. • To optimize every aspect of production by adapting the equipment to meet all jobsite needs.

Maui…

Aging Golf Course Looks to Remain Competitive WAILUKU, Hawaii (AP) Kaanapali Golf Course on Maui’s west coast has announced it will be modernizing its facilities to remain competitive as a resort destination. The golf course plans to fix underused buildings that have been in operation since the 1960s, The Maui News reported. The course’s project summary states reduced golf play at the resort has created opportunity for revitalization in other areas. Golf will remain at the core, though. The property currently includes two 18-hole championship golf courses. Developers want to create a 27-hole championship course and a nine-hole, par-3 course. Other plans include constructing a 136room boutique hotel; adding 80,000 sq. ft. (7,432 sq. m) of retail space; developing 56 oceanfront condominiums and 100 to 200 multifamily ocean-view residences; building a new beach club and public signature

restaurant; and upgrading golf holes and a lagoon. The total project area is 164 acres, or more than half of the total 305-acre property that includes some beachfront property near Black Rock. The development will need an amendment to the West Maui Community Plan land use map and a change of zoning. Construction is scheduled between 2020 and 2025. The developer is Lowe Enterprises Investors of Los Angeles. Past upgrades including the construction of Hyatt’s Residence Club and Marriott’s Maui Ocean Club time-share towers have fed into the expansion project as well. For more information, visit mauinews.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 15

Mega Machinery Co. 12215 Highway 67 Lakeside, CA 92040 (888) 883-7618 www.megamachineryco.com

Page 16 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Montana…

Voters Overwhelmingly Approve School Bonds for New Construction BOZEMAN, Mont. (AP) Three Montana cities have passed school bonds for construction, including a $125 million bond in Bozeman to build a new high school and remodel the current one. School districts throughout the state held elections on May 2 to choose school board members and request operating levies. About 65 percent of voters in the Bozeman High School district approved the bond, the largest ever requested of area voters and $45 million more than the $80 million infrastructure bond rejected by the Montana Legislature on the last day of the 2017 session. “I’m excited for the future of our community,” Bozeman Schools Superintendent Rob Watson told the Bozeman Daily Chronicle. “I feel

happy that our voters have placed trust in us to do this work. I’m confident we’re going to do a great job.” Watson said they hope to break ground on the new high school next spring and have it ready to open by the fall of 2020. The current high school has about 2,000 students — making it the largest school in the state — and the city’s population is growing. Six months ago, Bozeman voters rejected a $70 million bond to rebuild and expand the county Law and Justice Center. In Helena, nearly 75 percent of voters approved a $63 million bond to replace three elementary schools just two years after voters rejected a $70 million bond. Helena hasn’t built a new elementary school in 40 years. Superintendent Jack Copps said the margin by which the bond passed sur-

passed his expectations. “As school employees, we need to make sure we provide the best results, the best quality education that’s offered in this state. And we need to make sure that continues to happen,” Copps told the Independent Record. In East Helena, two-thirds of voters approved a $12 million bond for a new school for first- and second-graders and to add five classrooms to the middle school to accommodate increasing enrollment. East Helena Schools Superintendent Ron Whitmoyer has said they hope to break ground on the new elementary school in July and have it ready for students by August 2018. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Shaheen Beauchamp Builders LLC Claims Two Summit Awards in Nev. Shaheen Beauchamp Builders LLC claimed two Summit Awards at the 12th Annual Summit Awards Kentucky Derby Run for the Roses themed event held at Rancharrah in Reno on May 6. “We are honored to have been chosen for two of our outstanding projects in 2016,” Jeff Shaheen, co-owner of Shaheen Beauchamp, said. “Each of these projects contribute in special ways to the community they inhabit.” The company received the 2016 Top Industrial Development Award for the renovation of Carson City’s largest employer, Click Bond, Inc.’s Building 51. Originally serving as the company’s original manufacturing shop, Building 51’s renovation included a unique ground source high efficiency heating and cooling system, Carson City’s first non-geothermal ground source system, designed especially for use of available groundwater on Click Bond’s campus. “Miles of pipes and 75 wells dug 250 to 300 feet down under the tarmac of the Carson City airport circulate water kept a fairly constant 70 degrees underground throughout the building's HVAC system. No gas is used in the building, and all lighting is high efficiency LED, significantly adding to the building’s energy efficiency,” Shaheen said. “Specially designed ducting was built into the arching support beams in the conference space, reflecting the sleek interior of an aircraft and the company’s contribution to the aero-

space industry.” Shaheen Beauchamp also captured the 2016 Public Use Project of the Year for the construction of the William N. Pennington Teen Center on the campus of the Boys & Girls Clubs of Western Nevada in Carson City. Shaheen said the 6,500-sq. ft. center replaced the clubs’ previous Teen Center space of less than 600 sq. ft., enabling the organization to serve a greater number of teens. Membership doubled in the month following the center’s grand opening and has more than doubled since. “The best thing about the Teen Center is Teen Club members worked with the project design team to provide user input to the design and construction,” Shaheen said. “The Teen Center was built onto the original club, where exposed beams and materials bear marks from the original club construction, a big hit with club members, who value the authentic look and feel.” The Summit Awards are sponsored by the Nevada Builders Alliance, the Northern Nevada chapters of Certified Commercial Investment Member Institute, Commercial Real Estate Women, NAIOP, the Commercial Real Estate Development Association and SJS Commercial Real Estate. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. With Komatsu CARE you can: • Lower your cost of ownership • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment

It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

WEST KOMATSU DISTRIBUTORS

Bacon-Universal Company, Inc. www.baconuniversal.com HI Hilo 808-935-8595 • 800-352-3508 Honolulu 808-839-7202 • 800-352-3508 Kailua-Kona 808-326-1212 • 800-352-3508 Kauai (Lihue) 808-245-8472 • 800-352-3508 Wailuku Maui 808-244-9158 • 800-352-3508

Clairemont Equipment Co. www.clairemontequipment.com CA Escondido 760-739-9100 Fontana 909-429-9100 Imperial 760-355-7700 Indio 760-863-5558 San Diego 858-278-8351

Craig Taylor Equipment Company www.craigtaylorequipment.com AK Anchorage 907-276-5050 • 800-279-5051 Fairbanks 907-452-1192 • 800-452-1192 Soldotna 907-262-5977 • 800-254-5977 Wasilla 907-376-3838 • 800-973-2607

Kirby-Smith Machinery Inc. www.kirby-smith.com OK Oklahoma City 405-495-7820 • 800-375-3339 Tulsa 918-438-1700 • 800-375-3733 TX Abilene 325-692-6334 • 877-577-5729 Amarillo 806-373-2826 • 800-283-1247 Dallas 214-371-7777 • 800-753-1247 Ft. Worth 817-378-0600 • 877-851-9977 Lubbock 806-745-2112 • 866-289-6087 Odessa 432-333-7000 • 877-794-1800

Power Motive Corporation www.powermotivecorp.com CO Colorado Springs 719-576-5541 Denver 303-355-5900 Durango 970-259-0455 • 970-259-0456 Grand Junction 970-241-1550 Milliken 970-587-1188 WY Cheyenne 307-634-5149

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 17

Komatsu Equipment Co. www.komatsueq.com NV Elko 775-753-7557 North Las Vegas 702-399-1004 Sparks/Reno 775-356-1334 UT St. George 435-986-1000 Pleasant Valley 435-216-7777 Salt Lake City 801-972-3660 • 1-877-Komatsu South Jordan 801-972-3660 WY Casper 307-682-1445 Gillette 307-682-1445 Rock Springs 307-686-1300

Modern Machinery, Inc. www.modernmachinery.com ID Boise 208-336-8570 • 800-221-5211 Pocatello 208-233-5345 • 800-829-4450 MT Billings 406-252-2158 • 800-735-2589 Kalispell 406-755-5540 • 800-434-4190 Missoula 406-523-1100 • 800-332-1617 OR Eugene 541-688-7321 • 800-826-9811 Portland 971-222-1710 • 800-950-7779 WA Kent 253-872-3500 • 800-669-2425 Rochester 360-273-4284 • 800-304-4421 Spokane 509-353-1654 • 800-541-0754

Road Machinery, LLC www.roadmachinery.com AZ Gilbert 480-545-2400 Phoenix 602-252-7121 Prescott 928-778.5621 Tucson 520-623-8681 • 800-989-8681 CA Bakersfield 661-695-4830 Fremont 510-659-1903 Fresno 916-350-0640 Perris 909-355-3600 Redding 530-229-3820 Pico Rivera 562-699-6767 West Sacramento 916-375-3540

Waukesha-Pearce Industries, Inc. www.wpi.com TX Beaumont/Port Arthur 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275 Edinburg 956-386-0107 Houston 713-723-1050 Kilgore 903-984-2011 Pflugerville 512-251-0013 San Antonio 210-648-4444 Tomball 281-351-9016

www.komatsuamerica.com/komatsu-care

Page 18 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 19

TRI-WEST TRACTOR 6281 Southfront Rd. Livermore, CA 94551 925-455-8200 • Fax: 925-455-8220 www.tri-westtractor.com

BANE MACHINERY, INC. 2449 Manna Rd. Dallas, TX 75520 214-352-2468

Tyler, TX 903-597-6641 Fort Worth, TX 817-847-5894

www.banemachinery.com

Orion Equipment

Scott Equipment

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

14635 Valley Blvd. Fontana, CA 92335 909-822-2200 800-316-0327 www.scottequip.com

Farmers Equipment Co. 410 19th St. Lynden, WA 98264 888-855-4981

17893 State Route 20 Burlington, WA 98233 888-855-4982

www.farmersequip.com

Page 20 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

The SEAL SAVER WILL:

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062 Fax: 770-509-5832

1-800-683-5189

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Kirby-Smith Promotes Jason Rogers to Service Manager, Pipeline Services Kirby-Smith Machinery Inc., a Komatsu distributor, recently promoted Jason Rogers to service manager, pipeline services. He was promoted from his previous role as product service manager in Tulsa. As service manager of KirbySmith’s pipeline division, Rogers will support the needs of the equipment distributor’s customers throughout the United States. He has more than 20 years’ experience in the heavy equipment industry, providing him with hands-on equipment knowledge and product application, as well as experience in the oversight and management of large scale projects. A Komatsu master service tech- Jason Rogers nician, his prior experience as both a supervisor and field technician working with pipeline contractors in puts Rogers in a unique position to pro- the field. vide pipeline contractors with a full“I know the challenges my cusservice solution. tomers face,” said Rogers. “The key is Rogers is excited about the new to keep issues simple and have an open opportunity and has already begun mind in solving them. We are going to

work together to maximize machine uptime and productivity so they can meet their project goals.” Joe Trapani, director of Kirby-Smith pipeline services, believes Rogers will prove to be a significant asset for the pipeline division as he supports KirbySmith’s customers nationwide. “Jason brings an extraordinary skill-set to his new role. He has a stellar reputation in this industry, a wealth of product knowledge and experience, and the willingness to go the extra mile for our customers.” For more information, visit kirby-smith.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

COLORADO

NEW MEXICO

WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora 303-739-3000 Denver 303-433-2727 (Rental) Carbondale 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs 719-390-7316 (Rental) 719-635-1669 Granby 970-328-2080 (Rental) Gypsum 970-328-2080 (Rental) Hayden 970-276-3781 Silverthorne 970-262-3788 (Rental) Fort Collins 970-493-5005 (Rental) Grand Junction 970-245-6546 (Rental) 970-242-2834 Pueblo 719-544-0088 (Rental) 719-544-4433 Steamboat Springs 970-871-1990 (Rental) Windsor 970-278-1750 (Rental) Burlington 719-346-7880 (Rental) (719) 346-5132 Durango 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750

WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista 505-334-5522 (Rental) La Cruces 575-647-9700 Albuquerque 505-938-2000 (Rental) 505-345-8411 Hobbs 575-393-2148 (Rental) 575-393-3665 Clovis 505-235-3294 (Rental) Farmington 505-327-5331

NORTH DAKOTA TRACTOR AND EQUIPMENT Williston • 701-572-8377

NEVADA CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway Henderson, NV 89052 702-649-8777 Fax: 702-633-4699 Elko • 775-738-9871 Reno/Sparks • 775-358-5111

TEXAS ANDERSON MACHINERY CO. www.andersonmachinerytexas.com

Corpus Christi • 361-289-6043 Manor • 512-272-8133 Pharr • 956-781-5995 San Antonio • 210-661-2366 Victoria • 361-575-8111 GEORGE P. BANE, INC. www.banemachinery.com Tyler • 903-597-6641 WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

WASHINGTON N C MACHINERY www.ncmachinery.com 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pasco • 509-547-9541 Spokane • 509-535-1744

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 21

ALASKA NC MACHINERY www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 907-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400

CALIFORNIA HOLT OF CALIFORNIA www.holtca.com Pleasant Grove • 916-921-8969

IDAHO WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Hayden • 208-762-6690 Idaho Falls • 208-552-2287 Lewiston • 208-746-3301 Meridian • 208-888-2287 Pocatello • 208-232-2640 Twin Falls • 208-734-7330

MONTANA TRACTOR AND EQUIPMENT Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Kalispell • 406-752-3030 Missoula • 406-721-4050

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton • 580-323-3422 Oklahoma City • 405-789-6812 Tulsa • 918-437-5085

OREGON WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pendleton • 541-276-5812

WYOMING TRACTOR AND EQUIPMENT Worland • 307-347-4747

Now Available with Tier 4 Final

Page 22 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.

DELIVERING SUCCESS TOGETHER

Contact our distributors and find out how we can help improve your bottom line.

BIGGE CRANE AND RIGGING

SCOTT-MACON EQUIPMENT

RT-T-HC-CC-AT-BT-T www.bigge.com

RT-T-HC/CC-AT-BT www.smequipment.com

San Leandro, CA 888-337-2444 510-638-8100

14925 South Main Street Houston, TX 77035 713-721-7070 Fax: 714-721-0422

San Jose, CA 408-452-1537 La Mirada, CA 714-670-9525 Missoula, MT 888-337-2444 Houston, TX 713-434-0995 Auburn, WA 206-443-8500 Richmond, VA 804-271-9356

Dallas, TX 214-391-4000 Corpus Christi, TX 361-289-2782 Houma, LA 985-851-1118 Baton Rouge, LA 225-753-4111 Lake Charles, LA 337-882-0197 Tulsa, OK 918-224-2000

Authorized Terex Cranes Distributors © Terex Cranes 2017

•

Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.

For Your Local Terex Dealer Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 23

DOOSAN. AN POWERFUL W SOLUTIONS. UTIONS At Doosan, we do more than engineer products. We engineer solutions. Robust compressors that weather her the harshest conditions. Generators and light towers that match innovation with efficiency. Unrivaled service and support, day or night. That’s a the way we’ve operated for over 100 years, and the way we’ll do business for dec d ades to come.

AIR COMPRESSORS / GENERATORS / LIGHT TOWERS Air Compressor Solutions, Inc.

Ditch Witch of Arizona

Ditch Witch of Southern Arizona

Odessa (432) 335-5900

Phoenix (602) 437-0351

Tucson (520) 579-0261

TEXAS

ARIZONA

Sierra Machinery, Inc. www.sierraelpaso.com

TEXAS

El Paso (915) 772-0613

NEW MEXICO Artesia (575) 746-6592

DoosanPortablePower.com | 800.633.5206

Volvo Construction Equipment & Services CALIFORNIA

Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244

San Diego/ Lakeside (619) 441-3690 Corona (951) 277-7620

Papé Material Handling Inc.

OREGON

Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

www.papemh.com

NEVADA

Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386

Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

Page 24 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Largest U.S. Water Project Set to Begin PIPELINE from page 1

for the U.S. Treasury. That you probably haven’t heard about it is no surprise, said Dave Rexing, a member of the American Water Works Association water utility council and development manager of the water authority serving Las Vegas. Such life-giving endeavors often are under-appreciated, he said, no matter that water “is the basis of life.” “The infrastructure has largely become an unnoticed asset,” he said. But this project, financed by the state of Texas’ water fund, is an attention-grabber. Northwest Harris County pumps billions of gallons from underground each year. As wells have sunk deeper, some hit salty water. Others in nearby Montgomery County stretched for nearly a mile into water that came up hot and smelled like sulfur. Drilling so deep is expensive, but the region currently has no alternate source. “There is a finite ability of the Gulf Coast Aquifer to produce water,” said Wayne Klotz, president of the Coastal Water Authority. “Nobody has ever determined what would happen if we pumped it so hard that the water pressure sunk below the aquifer, and nobody wants to find out.” The CWA broke ground in March on the canal, dubbed Luce Bayou for the natural waterway beside it, the first of the segments of the system to begin construction. Lake Houston doesn’t have enough water to wean the entire region off groundwater, so the canal will import water from the Trinity to boost its capacity. The river, in turn, is fed by Lake Livingston, which the city has owned water rights to since the 1960s. Outflows from Lake Livingston will be increased to send water down the new canal. Moving that much water could have environmental consequences along the way to Galveston Bay, although the U.S. Army Corps of Engineers has said it expects them to be “minimal.” The chain of projects, should they go forward and wrap up on schedule, will fundamentally shift how this region gets its water within 10 years. “For a couple of decades they’ve been planning this,” said Jeffrey Benjamin, project director for the five-fold expansion of the Northeast Houston Water Purification Plant expansion project. Local confidence in its water supply was shaken by the late 1970s, when daily groundwater withdrawals in Harris County and northwest Galveston County exceeded 450 million gal. Land along Galveston Bay began sinking as the underground water supplies were depleted. “That’s when people started thinking they’d have to change,” said Mike Turco, general manager of the HarrisGalveston Subsidence District, which formed in 1975 to move the region from dependence on water in the ground to water on the surface, like lakes. With rules in place and new pipelines carrying water from Lake Houston, the southernmost section of the district reduced groundwater pumping from nearly 140 million gallons per day in 1976 to less than 20 million in 1990. The middle section fell from 160 million in 1976 to less than 20 million in 2002. But in the northernmost swath, which includes about half of Harris County, groundwater withdrawals peaked at 280 million gal. per day in 2000, before tapering off to about 175 million in 2015. “There’s not enough water in the ground,” said Al Rendl, president of the North Harris County Regional Water Authority. “All the people, all the businesses, all the factories, all the everything — it needs water.” For Rendl, a retired Exxon Mobil executive, the project to

pipe billions of gallons of water into his region caps a nearly 20-year effort that has put him in front of hundreds of town hall meetings explaining the need. The initially skeptical crowds, he said, better understand the risks today. Folks first drilled the Chicot Aquifer, the shallowest layer, with wells as deep as 500 ft. But the supply there dwindled, so most large wells for municipal utility districts, ranging from 14 to 20 in. in diameter and pumping up to 1,500 gal. per minute, moved on to the deeper Evangeline Aquifer. Water levels there dropped by 200 ft. over 17 years, Rendl said. More recently, wells have tapped the Jasper Aquifer, at around 2,000 ft., even though water there is salty and poor quality. In The Woodlands and in Montgomery County, drillers tapped the Catahoula Aquifer, as deep as 4,000 ft., where water comes up hot. When Rendl started with the water authority in 2000, he was charged with implementing the subsidence district’s mandates to scale back pumping. The substantial reduction in the region’s pumpage happened due to other smaller pipe projects from Lake Houston, including the original Northeast Water Purification Plant in 2005. The authority laid almost 100 mi. of pipe within a decade, and also levied fees on groundwater withdrawals until by 2010 the region got 30 percent of its water from the lake. It aims to get 80 percent by 2030, even as overall demand for water is expected to grow sharply. The water treatment plant will be the largest such project in the nation, with the 27-acre facility expanding by 90 more acres and increasing its daily capacity to 400 million gal. from 80 million. The 108-in.-diameter pipe to carry that water westward will be the widest ever installed in the city of Houston. Mackrena Ramos, senior associate of LAN, an engineering firm that specializes in water infrastructure and is program manager for 11 of the pipeline’s 13 segments, said a major challenge has been clearing the pipeline’s course through urbanized areas, acquiring real estate and planning to divert other utility lines. Where possible, work crews will be drilling underneath roadways to build in public rights of way without disrupting traffic, she said. That pipeline should be completed by 2021. Another 7.5mi. length will carry water to a proposed pumping station on Texas 249. Another 40 mi. of 8-ft.-wide pipe will carry water farther west into Fort Bend County. Work on the water treatment plant expansion is set to begin this summer and be completed by 2024. The Texas Water Development Board has pledged about $3.2 billion in low-interest loans from the State Water Implementation Fund of Texas to finance the combined projects. Costs will be split between the city of Houston and five regional water authorities in Harris and Fort Bend counties in an effort to meet long-term needs. Rendl compares the effort to the acquisition in the 1940s of water rights for what would become Lake Houston. The city had a population of around 400,000 and at the time it seemed excessive to claim almost 12,000 acres of water storage space. But, he said, “If it hadn’t been for those people who bought the property for Lake Houston, we’d be in big trouble.” Rendl guesses Houstonians in the future might say the same about the project getting under way today. For more information, visit houstonchronicle.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

KOMATSU EQUIPMENT COMPANY www.komatsueq.com 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557

1409 East 3850 South St. George, UT 84790 435-986-1000

3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334

10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681 Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 800-989-7121 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540

ROAD MACHINERY

www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383

KOMATSU SOUTHWEST 4520 National Park Hwy Carlsbad, NM 88220 575-628-8301 901 Troy King Road Farmington, NM 87401 505-324-8601 1181 Burgundy Drive El Paso, TX 79907 915-872-1001

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 25

KIRBY-SMITH MACHINERY INC. www.kirby-smith.com 6715 W Reno Avenue Oklahoma City, OK 73137 800-375-3339 405-495-7820 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000

POWER MOTIVE CORPORATION www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Durango, CO 970-259-0455 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188 Cheyenne, WY 307-634-5149

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 S. Main Street Houston, TX 77035 713-723-1050 Buffalo, TX 903-322-7150 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 Kilgore, TX 903-984-2011 Pflugerville, TX 512-251-0013 Port Arthur, TX 409-721-5305 San Antonio, TX 210-648-4444 Tomball, TX 281-351-9016

Page 26 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 27

Page 28 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Company Celebrates Facility Remodeling Milestone

The recently completed service area of Ditch Witch of Arizona sits along busy I-10 with its 250,000 cars per day.

EVENT from page 8

(L-R): Cesar Marcus and Sean O’Brien of Vertek chat with Ditch Witch of Arizona’s Bob Mayer at the Customer Appreciation event held on May 12.

David Klingaman (second from R), owner of Ditch Witch of Arizona, welcomes (LR) James Zimmerman, Andrew Lusk, John Lusk and Gary Tedesco, all of Kleven Construction.

Kobelco USA Expands Dealer Network Sales Team; Adds District Business Mgr. Cole Rudder, Southeast district business manager of Kobelco USA.

Kobelco Construction Machinery USA continues to provide personal service through its nationwide dealer network with the addition of Cole Rudder, Southeast district business manager. Rudder will be responsible for providing support and assistance to Kobelco dealers located in the Southeast region of the United States. He will train dealer personnel on the features and benefits of Kobelco products and ensure dealers are provided with the necessary tools to market Kobelco excavators. Rudder will assist dealers in the development and execution of annual business plans, including inventory control and sales strategies, to increase the market share and profitability of his territory. He also will be responsible for continuing to expand Kobelco’s distribution locations through dealer recruitment and development. “The addition of Cole highlights Kobelco’s dedication to provide a nationwide dealer network where each dealership is highly trained on Kobelco excavators — from features and benefits, to service, maintenance and warranty,” stated Randy Hall, vice president of operations at Kobelco USA. “Highly qualified personnel like Cole are essential to our long-term expansion strategy and we are excited to have him as part of the Kobelco USA team.” Helping Rudder succeed in his new role as Southeast district business manager is extensive marketing, management and operations experience within the construction equipment industry. Rudder is well-versed with leading teams that consist of sales, customer service and product support as well as training teams to achieve maximum performance. Kobelco Construction Machinery USA offers industry-leading crawler excavators in the 3,000 lb. to 245,000 lb. classes including zero tail swing, compact, standard, long-reach, mass excavation, and demolition models. Kobelco is committed to producing quality machines with advanced productivity-boosting features and innovative technologies. For more information, call 281/888-8430 or visit www. Kobelco-USA.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

SECTION

Trucks & Trailers Pages 29-31

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

FSS Announces Plan to Acquire TBEI Federal Signal Corporation (FSS) (the company), a leader in environmental and safety solutions, announced the signing of a definitive agreement to acquire Truck Bodies and Equipment International (TBEI), a leading U.S. manufacturer of dump truck bodies and trailers, for $270 million, subject to post-closing adjustments. This represents a multiple of 7.2x TBEI’s EBITDA for the 12-month period ending March 31, 2017, before accounting for synergies. The acquisition will enable the company to strengthen its market position as a specialty vehicle manufacturer in maintenance and infrastructure markets. This transaction also will allow the company to leverage its expertise in building chassis-based vehicles, significantly expand its exposure to higher growth industrial end-markets and balance the mix of revenues it generates from municipal and industrial markets. The transaction is expected to be immediately accretive to the company’s margins and earnings per share (“EPS”), excluding transaction costs and before giving effect to anticipated synergies. Transaction Highlights • TBEI is expected to be combined with the businesses within the company’s environmental solutions group (“ESG”) to create a single platform providing municipal and industrial customers with a complete suite of maintenance and infrastructure equipment and supporting solutions. This platform will expand the company’s leadership position in these markets and will provide a springboard for future organic growth and M&A • The transaction diversifies the company’s current end markets through an expanded focus on infrastructure, construction, waste, rendering and other industrial end markets • The company expects the acquisition to be modestly accretive to EPS in 2017, increasing to an annual run rate of between $0.07$0.12 per share and $0.12-$0.17 per share by the second and third anniversary of the acquisition, respectively • The Company intends to apply its 80/20 principles to TBEI’s operations to further optimize an already strong business • Annual run-rate synergies are anticipated to be between $3-4 million, phased in over three years. Supply chain, cross-selling products from both ESG and the Safety and Security Systems Group through the TBEI distribution channel, leveraging our existing parts and distribution business and sharing of manufacturing best practices will drive the synergies • The company intends to fund the acquisition through a combination of available cash and borrowings available under its existing credit agreement. Upon closing, the Company anticipates a debt to EBITDA ratio of approximately 2.7x • With the healthy combined cash flow from its legacy businesses and TBEI, the company expects a rapid reduction in debt levels TBEI has successfully built a portfolio of strong brands, which see FSS page 31

The 2018 Isuzu FTR is powered by Isuzu’s 4HK1-TC 5.2-L turbocharged four-cylinder diesel engine. It generates 520 lbs.-ft. of torque and 215 hp and carries a B10 durability rating of 375,000 mi.

Isuzu Begins Production of Its New Class 6 Medium-Duty Truck Isuzu Commercial Truck of America Inc. began production of its all-new entry in the Class 6 mediumduty truck segment — the 2018 Isuzu FTR. The truck is being produced at a new 80,000-sq.-ft. Spartan Motors facility in Charlotte, Mich. “We believe that the all-new FTR is the truck of the future,” said Shaun Skinner, president of Isuzu Commercial Truck of America. “This truck’s combination of low-cab-forward design, Class 6 GVWR and four-cylinder diesel engine gives it fantastic maneuverability, the ability to carry more cargo than a conventional Class 6 truck, and outstanding fuel efficiency. “We’re also thrilled to be working with Spartan Motors in Michigan,” Skinner added. “Much of the engineering for this truck was done at the Isuzu Technical Center of America in Plymouth, Michigan, and many of the parts for it are U.S.-sourced. This is a true medium-duty Class 6 truck designed and built for this market, in this market.” The FTR is powered by Isuzu’s 4HK1-TC 5.2-L turbocharged four-cylinder diesel engine — a first in the segment. It generates 520 lbs.-ft. of torque and 215

hp and carries a B10 durability rating of 375,000 mi. — meaning that 90 percent of engines should reach that mileage before requiring an overhaul. The truck has a gross vehicle weight rating of 26,950 lbs. Eight wheelbase lengths, ranging from 152 to 248 in. (386 to 630 cm), accommodate bodies from 14 to 30 ft. (4.2 to 9 m), allowing for a wide variety of body applications. The new truck assembly plant where the FTR is being produced represents a $6.5 million investment and has already brought new jobs to the Michigan workforce. Steve Guillaume, president of Spartan Specialty Vehicles, said, “We value our business relationship with Isuzu, and we’re excited to help bring this groundbreaking new product to the market.” For more information, visit www.isuzucv.com or www.spartanmotors.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 30 • May 28, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

MVP Status…

NTEA Recognizes Companies That ‘Raise the Bar’

This combo tank provides 100 gal. (378.5 L) of diesel and 18 gal. (68 L) of DEF capacity that fits seamlessly into the bed of pickup trucks (half-ton and larger — including goosenecks and fifth wheels) with both pumping systems concealed within its structure — no elements protrude from the tank.

Thunder Creek Equipment Introduces Combo Diesel/DEF Transfer Tank Thunder Creek Equipment introduced a combination diesel and diesel exhaust fluid (DEF) transfer tank for pickup trucks. This combo tank provides 100 gal. (378.5 L) of diesel and 18 gal. (68 L) of DEF capacity that fits seamlessly into the bed of pickup trucks (half-ton and larger — including goosenecks and fifth wheels) with both pumping systems concealed within its structure — no elements protrude from the tank. The sleek design ensures excellent rear visibility by taking up no more than half of the rear window, according to the manufacturer. “We know that many equipment owners are still in the early stages of determining the best way to handle DEF in the field,” said Luke Van Wyk, national sales manager and owner, Thunder Creek Equipment. “This combination tank — which takes up a similar footprint as today’s pickup truck tanks — provides owners with an efficient and contained way of transporting both diesel and DEF out to the field in a design they are familiar with.” The combo tank features a 100-gal. steel diesel tank, and an 18-gal. polyurethane DEF tank that can be substituted with a tank and pumping system for engine or hydraulic oil. Both fill nozzles (available in automatic or

“This combination tank — which takes up a similar footprint as today’s pickup truck tanks — provides owners with an efficient and contained way of transporting both diesel and DEF out to the field in a design they are familiar with.” Luke Van Wyk Thunder Creek Equipment

manual) are located on the driver side of the truck and extend out 10 ft. (3 m) from the tank. An optional thermostatically controlled DEF heating system is available for use in northern climates that ensures that the temperature of the DEF tank, pumps and hoses doesn’t dip below 25F. The 12V Webasto heating system is entirely self-contained and runs off diesel from the tank. Diesel is pumped at 15 gal. (56.7 L) per minute (GPM) via an industrialgrade 12V pump, while DEF is pumped at up to 10 gpm (37.8 Lpm).

Because standards don’t raise themselves, NTEA’s member verification program (MVP) acknowledges the companies leading the industry to excellence. Fleet managers, truck dealers and OEMs know truck equipment manufacturers and distributors with MVP status have implemented specific business and quality standards and comply with federal regulations. New MVP members (as of March 31, 2017) • Glaval Bus Division of Forest River Inc. (Elkhart, Ind.) • Kalida Truck Equipment Inc. (Walbridge, Ohio) • PAFCO Truck Bodies Inc. (East Peoria, Ill.) • Royal Truck Body (Carson, Calif.) Renewals • AmeriDeck (Hadley, Pa.) • Bucks Fabricating (Hadley, Pa.) • Deist Industries Inc. (Hadley, Pa.) • Demountable Concepts (Glassboro, N.J.) • Douglass Truck Bodies Inc. (Bakersfield, Calif.) • Knapheide Truck Equipment–Garner (Garner, N.C.) • Marathon Industries Inc. (Santa Clarita, Calif.) • Metropolitan Truck Center Inc. (Stoughton, Mass.) • O’Reilly Equipment LLC (Newbury, Ohio) • Pacific Truck Colors (Tualatin, Ore.) • Perfection Equipment Co. (Oklahoma City, Okla.) Current NTEA distributor and manufacturer members are encouraged to apply for MVP status at any time. There is no charge — NTEA underwrites the cost of MVP as part of an ongoing effort to enhance the core competencies of its members. Once qualified, companies receive MVP status for a three-year term. To renew, MVP members must again document compliance, ensuring their ongoing commitment to professionalism, industry knowledge and high performance.

New Look NTEA recently made some changes to MVP, refreshing Thunder Creek’s proprietary 2-in-1 the look, according to the association. DEF pumping solution, which pumps Updates include a new look for promotional use; simpliDEF in and out of the tank via a closed fied application materials; and improved communication. system to ensure fluid quality, also is These changes highlight the importance of MVP and available as an option. The entire transfer tank and all of its showcase the benefits of participation. Keep in mind, this is components are concealed within a simply an enhancement — there are no current plans to alter lockable, weather-sealed enclosure, program criteria. If standards are adjusted in the future, MVP and comes with diamond plate alu- member companies would not need to conform until renewminum doors as an option. al. For more information, visit For more information, call 800/441-6832 or visit ThunderCreek.com. ntea.com/mvp. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2017 • Page 31

XL Specialized Trailers Reveals Updated Gooseneck Trailers XL Specialized Trailers has updated its low-profile hydraulic detachable gooseneck trailers, which includes the XL 110 low-profile HDG and XL 120 low-profile HDG. The updates include a new design and additional user-friendly features. The biggest update can be found in the low-profile gooseneck. The gooseneck now features a relief cut out, which provides additional space between the trailer and the truck. The low-profile design continues to provide versatile equipment hauling, even enabling scrapers to load over the top for significant weight savings. XL offers three HDG models, two that include a 24-in. (61 cm) loaded deck height. This includes the XL 110 low-profile HDG, which is rated at 110,000 lbs. (49,895 kg) in 12 ft. (3.6 m); and the XL 120 low-profile HDG rated at 120,000 lbs. (54,431 kg) in 16 ft. (4.8 m) and 110,000 lbs. in 10 ft. (3 m). The third model offers an 18-in. (45.7 cm) deck height with the XL 110 low-profile HDG. It is rated at 110,000 lbs. in 16 ft. This version’s lower deck height helps meet bridge clearance regulations without the need for a drop side or beam deck. To save time while loading and unloading, the trailer’s 13-ft. (3.9 m) long neck is easily removable through the use of a wet kit

or with a power unit. The neck offers a fiveposition ride height. Based on neck position and load, the deck can be leveled as needed with the adjustable wheel area ride height. In addition, a new work light is positioned in the upper deck as an added safety feature for loading and better visibility when checking on the load at night. The main decks on all Low-Profile

XL Specialized Trailers has updated its low-profile hydraulic detachable gooseneck trailers, which includes the XL 110 low-profile HDG and XL 120 low-profile HDG. The updates include a new design and additional user-friendly features.

FSS Intends to Acquire TBEI FSS from page 29

currently occupy premier market share positions in their respective product categories, through a combination of an intense focus on operational excellence, a comprehensive distribution strategy, and continuous attention to its customers’ primary requirements for a high-quality product and short lead times. During the 12-month period ending March 31, 2017, TBEI generated revenues of $206 million and an EBITDA margin of approximately 18 percent. TBEI operates five manufacturing facilities throughout the United States and employs approximately 850 people. “The TBEI business is a strong strategic fit with our ESG businesses and allows us to broaden our focus on maintenance and infrastructure markets. With its large industrial customer base, TBEI will accelerate the achievement of our long-standing objective of balancing the mix of revenue streams between municipal and industrial. This acquisition is consistent with our disciplined capital deployment strategy, which targets the acquisition of high performing businesses that grow and compound our cash flow,” said Jennifer L. Sherman, president and chief executive officer. “TBEI is an outstanding company with clear leadership positions in its end markets, a strong finan-

HDG’s are strong, built with T-1 flange and 80K webs, as well as cross members on 12in. (30.5 cm) centers. All models feature a full 26-ft. (7.9 m) area in the deck before the rear transition. For added durability over the long haul, the trailers include Apitong decking, a wood much stronger than oak. Other features include a toolbox in the front of the main deck to provide a storage

cial profile and a management team that will thrive as part of Federal Signal. This acquisition also represents a significant step towards the attainment of our strategic goal of profitably growing our revenues to over $1 billion.” TBEI’s President and Chief Executive Officer Robert Fines, an executive with more than 35 years of industry experience, including a variety of management positions within General Electric and Avery Dennison, will be joining Federal Signal’s management team. “We are excited to join the Federal Signal family and add TBEI’s six established brands to Federal Signal’s portfolio of market-leading businesses,” said Fines. “There are many similarities between TBEI’s operations and those of Federal Signal and we are confident in our ability to cross-pollinate manufacturing practices, leverage our distribution networks and create a leading platform to serve the needs of our customers.” Pending customary closing conditions and regulatory approvals, the transaction is expected to close within the next 90 days. For more information, visit www.federalsignal.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

area for chains and other items, while the deep bucket well provides an area for an excavator bucket to ride safely without detaching the lower boom section. In addition, the wheel area features an open boom trough to load the excavator arm. All XL low-profile HDG’s come standard with chain slots, D-rings and swing-out outriggers for several different tie down options. In addition, the 24-in. (61 cm) deck height versions have full-depth heavy-duty outriggers. The front ramp also includes T-1 flange reinforcement. The HDG model’s wheel area features bolt-on wheel covers available in both heavy-duty for parking on or medium-duty for driving on. The air tanks also are strategically located in the wheel area to keep them out of the way. To decrease wear on the tires, the third axle airlift can lift up when it is not needed. Finally, the frame of XL LowProfile HDG’s are prepped for flip axles and boosters respectively, allowing extra axles as needed. For more information, visit www.xlspecializedtrailer.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 32 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Albuquerque Project Divided Into 10 City Districts TRANSIT from page 1

One reason a bus rapid transit system was selected rather than light rail, is that light rail is notoriously expensive — to the tune of approximately $150 million to $250 million per mile. Comparatively, bus rapid transit is typically $10 million to $30 million per mile. ART — Some Rail-Like Features Albuquerque Rapid Transit or ART combines many features of rail transit with the flexibility of buses. ART officials determined that the system has the most costeffective technology for Albuquerque’s current population and future ridership estimates. Some key elements of ART include a dedicated road, lane or mixed traffic route, frequent service, prioritized signaling at intersections, pre-boarding ticketing and a boarding platform level with the bus floor. Bradbury Stamm of Albuquerque is general contractor for the ART project. The company specializes in design-build construction, construction management, multi-unit residential projects, general contracting, water and waste water construction and commercial building projects. It serves New Mexico, Colorado and Texas. Previous projects by the builder include Rio Rancho Events Center (also known as Santa Ana Star Center) in Rio Rancho, N.M., and a two-bridge project at Paseo del Norte and 2nd Street in Albuquerque. Bradbury Stamm’s subcontractors for the ART project include Star Paving, TLC Plumbing & Utility and AUI Inc. for roadwork; Bixby Electrical and MWI Inc. for electrical work; Accent Landscaping and Groundskeeper Landscaping for landscaping; San Bar Construction for road striping; Southwest Safety Services for traffic control and Western Technologies for quality control and testing. All of the subcontractors are based in Albuquerque. Project Divided Into 10 City Districts The electric bus line will run along Central Avenue from Coors Boulevard east to Tramway Boulevard and encompass 10 city districts including Old Town and downtown.

This past winter, much of the construction was taking place in the west-central, Old Town, university, Nob Hill and international districts. Some single-lane closures were necessary in each of the districts. In the Old Town area crews were installing a new water line on the east side of Rio Grande Boulevard from south of Merritt Avenue to Alhambra Avenue. The current phase of construction includes reconstruction of the Rio Grande Boulevard-Central Avenue-Lomas Boulevard intersection and new sidewalk installation in East Downtown. ART photo

This past winter, much of the construction took place in the westcentral, Old Town, university, Nob Hill and international districts. Some single-lane closures were necessary in each of the districts.

Busbasics.com photo

The electric bus line will run along Central Avenue from Coors Boulevard east to Tramway Boulevard and encompass 10 city districts including Old Town and downtown.

A bike lane will be added near Broadway Avenue and a bike lane will be extended near Montoya Street. Also, six traffic signals and six pedestrian signals will be installed along the route. In developing the system, the city wanted to improve on success of non-electric ABQ RIDE. About 42 percent of all ridership on ABQ RIDE is concentrated on Central Avenue. The city also wanted to take advantage of the opportunities for

development that occur when a transportation system goes into a main corridor. In many cities, business development surges along areas where many people are concentrated. ART will replace two existing ABQ RIDE bus routes on Central Avenue with a timelier service that utilizes a mix of dedicated lanes, bi-directional lanes and reversible lanes to keep buses moving. It will run by each station every seven and a half minutes, without being stuck in regular traffic.

Residents, Businesses File Lawsuit The lawsuit, filed in the 10th Circuit Court, delayed the start of the project, but in August 2016 the 10th Circuit Court of Appeals lifted an injunction that had prevented construction. A three-judge panel rejected legal arguments from project opponents who accused the city and Federal Transit Administration of violating environmental and national historic preservation laws in planning the project. Opponents of ART insisted that creating bus-only lanes would choke traffic along Central Avenue, damage the charm of old Route 66 and hurt businesses along the route. The litigation delayed the project about three months in 2016 from a planned late spring start to an Aug. 30 groundbreaking. “I am pleased that the Appeals Court has allowed construction to

ART photo

The project is expected to encourage transit-oriented development.

begin on this catalytic project,” said Albuquerque Mayor Richard Berry in an Aug. 30 release. “The design team and our community have worked diligently for years to ensure ART is a world-class project that will bring opportunity for Central Avenue and the people of Albuquerque.” Berry said the project will make Albuquerque a more connected and vibrant place to live. And he believes the electric-powered buses will save money and reduce pollution. Traffic Impact Analysis A traffic-impact analysis was performed as part of the e n v i ronment evaluation. The impact to each signalized intersection on Central Avenue between Unser Boulevard and Louisiana Boulevard was assessed using actual traffic counts from morning and afternoon rush hours. The results of the analysis found that all of the intersections would continue to operate in accordance with city of Albuquerque standards. In addition to the intersection-level analysis prepared for the project, the Mid-Region Council of Governments (MRCOG) analyzed potential impacts to parallel routes and found that while some through-traffic shifts to parallel routes, those routes have available capacity to handle the additional traffic and meet the city’s standards. Nationally, studies also have found that focusing development in major transit corridors like see TRANSIT page 45

Pages 33-42

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Contractor Adopts Pitbull to Help With Aggregates What’s in a name? In the case of Wells Excavators, it may not be what you think. The company, according to owner Jim Wells, neither digs wells nor sells excavators. Instead, the company is an excavating contractor. “I still occasionally get phone calls from people asking me to dig their well, and, at times, people wonder if we sell excavators,” Jim said of the company he founded in 1982. Wells Excavators began with the purchase of a small Kubota compact tractor to do some side jobs. Jim added a logging winch to the tractor and did some lot clearing. Some people took notice, the number of jobs grew, and before long, he purchased a 50 hp Kubota tractor loader backhoe and started tackling larger site work projects. Since then, the company has grown: Wells Excavators is regularly tackling residential and commercial site work projects as well as road building and design build projects for septic systems and ponds. He also has gotten involved in doing utility work (water mains and the Wells Excavators is regularly tackling residential and commercial site work like) as well as cell tower site work. projects as well as road building and design build projects for septic systems The area of northern New and ponds. Hampshire where Wells Excavators is located has largely become noted as a “Over the years I have seen many the manner the traditional box screeners vacation and recreational area. Home portable compact screening plants and work, mixed material is dropped into the building on New Hampshire’s many several of the ones that have come on hopper and oversized materials fall from the pristine lakes has become very popular the market recently were really made top of the screen to the side of the plant. The and doing that type of site work takes a for a landscaper and not a material pro- screened material falls through the plant and contractor who is in tune with the variducer,” he said. “The steel and the con- piles up underneath it. After running a few ous environmental needs and regulastruction were not particularly heavy. loads of mixed material into the hopper, you tions that come with it, Jim explained. When you run gravel all day there is a either need to stop feeding the hopper and go From his location in Colebrook, The Pitbull portable screening plant with convey- lot of vibration and I did not feel that remove the screened materials from undermost of his business has developed in or can process 1 cu. yd. (.76 cu m) of material many of these machines would hold up neath the plant or you need to have a second the northern New Hampshire, western under good conditions every 23 seconds. to continuous use.” machine and operator on hand to remove the Maine, and the Northeast Kingdom of Jim said that there are several box processed materials. If you are processing processor to make screened loam or gravel. Vermont. Over time, Jim saw the need and benefit screeners on the market that would hold up with a box screener and one machine in the As his business has grown, Jim has had a to owning his own screening plant to work under this type of work, but for his setup, he plant is simply idling 50 percent of the time, growing need to have ready access to aggre- his gravel pit, but to make the investment, he knew that he wanted a machine with a stack- to me that is costly inefficiency.” gate materials, which led to him establishing set in his mind a stringent criterion that the er. Jim decided that to make the investment his own gravel pit in Colebrook. From this screening plant would need to have for him “It had come to me that by adding a stack- he was considering, the screening plant pit, he excavates materials as needed and to see the full benefit of ownership. er to a small screening plant the end result would need to have a conveying system to from time to time, he brings in a material would be a one operator spread,” he said. “In First, it had to be industrial grade. see PLANT page 36

Page 34 • May 28, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Terex Finlay I-140 Features Advanced Control System The Terex Finlay I-140 direct drive 50 by 48 in. (ø127 by 124 cm) horizontal impact crusher with variable speed gives operators high levels of production in both recycling, mining and quarrying applications. The robust and proven Terex CR032 chamber gives excellent reduction ratios and high consistency of product shape, according to the manufacturer. A significant engineering approach being introduced in this model is the material flow through the plant. The flow of material has been significantly improved by increasing the width of components as the material moves through the machine. The machine features an advanced electronic control system that monitors and controls the speed of the rotor and regulates the heavy duty vibrating feeder (VGF) with integrated pre-screen to maintain a consistent feed of material into the impact chamber for optimal crushing conditions. Material from the integrated pre-screen can be diverted to a stock pile via the optional by-pass conveyor, or it may join the crushed product on the main belt. The standard hopper capacity of 7.5 cu. yds. (6 cu m) places the machine at the forefront in this competitive market sector, according to the manufacturer. “The introduction of the Terex Finlay I-140 represents a significant step change in our family of impact crushers. Our field test results of extensive testing have recorded significant productivity increases depending on the application, over the model that it replaces. The enhanced material flow process of the plant represents a significant step change to our engineering ethos and in due course will be extended to

encompass our range of impact crushers” said Alan Witherow, product manager. Key Features: • The ease of material flow through the machine has greatly improved with each component of the machine increasing in width as the material moves through the machine. • Fully hydraulic apron setting assist provides convenient and efficient adjustment of the aprons

• Heavy duty vibrating feeder (VGF) with integrated prescreen removes dirt fines and sizes bypass material for reprocessing. • Optional under crusher vibratory plate feeder with wear resistant liners aids material discharge flow. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The Terex Finlay I-140 direct drive 50 by 48 in. (ø127 by 124 cm) horizontal impact crusher with variable speed gives operators high levels of production in both recycling, mining and quarrying applications.

IROCK Crushers Launches TS-518 Mobile Screening Plant IROCK Crushers’ new TS-518 mobile tracked screening plant gives medium to large producers a compact, heavy-duty and easy-to-move finishing screen with a high output. IROCK developed the screener with hydraulically powered components, including conveyors, which allow operators to quickly and easily move the machine into place for production in as little as 10 minutes. The TS-518 track screen delivers fast, easy maneuverability around the job site without the need for a trailer, saving time and hassle. The screening plant optimizes productivity with its 12-cu.-yd. (9 cu m) hopper and 129 hp Cat diesel engine. IROCK offers the TS-518 in two- or three-deck models. Both feature heavy-duty, high-energy, two-bearing screen boxes for sorting a wide range of materials, including aggregates, concrete and sand. Contractors can sort as many as three sizes with the two-deck unit and four sizes using the three-deck model. Producers can change out the screen media on each deck for full control over end-product size. The screener’s feed conveyor offers an adjustable speed for efficient and effective material loading into the screen box.

IROCK’s TS-518 tracked screening plant delivers high output in a small, easily maneuverable unit.

Producers can sort and stockpile as many as three different materials at once with the unit’s tail conveyor and two side conveyors. The tail conveyor quickly sorts material into stockpiles as high as 15 ft. 2 in. (4.6 m), while its two side conveyors offer an adjustable speed for fast sorting into stockpiles as high as 16 ft. 8 in. (5 m) — among the highest in the industry. This high stockpile height allows operators to put more material under the belt before moving the screener to the next stockpile. IROCK built the TS-518 to withstand

rugged day-to-day use. It features a solid, heavy-duty steel chassis that provides ultimate durability onsite and during transportation. Maintenance is simple with the TS518’s easy-to-access engine compartment that provides generous room for repairing or replacing components. IROCK offers several additional features to customize the unit for specific applications. An optional remote-controlled livehead effectively sizes and loosens heavy, dirty and sticky debris from product before it enters the hopper. This expedites the screen-

ing process and boosts productivity. Users choose from the standard tethered remote or IROCK’s optional wireless remote for greater flexibility around the site. A crusher chute gives producers the option to directly feed material into the hopper without removing the tipping grid. A single-shaft shredder also is available for topsoil screening. For more information, call 866/240-0201 or visit www.irockcrushers.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2017 • Page 35

PACWEST MACHINERY www.PacWestMachinery.com 8207 South 216th St Kent, WA 98032 206-762-5933 4030 East Trent Ave Spokane, WA 99202 509-534-5933

19255 NE Sandy Blvd Portland, OR 97230 503-252-5933 1550 Irving Rd Eugene, OR 97402 541-302-3762

Metso’s Lokotrack® LT106™ jaw crusher: Meeting your demands for high capacity with maximum efficiency That’s how we make the big difference, the Metso Way.

CUTTING EDGE SUPPLY 234 East O Street • Colton, CA 92324 800-949-9014 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303

COMPASS EQUIPMENT www.compassequip.com 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610

Improve the efficiency and profitability of your crushing operation with the redesigned Lokotrack® LT106™ jaw plant. New features, including a radial side conveyor, high inertia flywheels, and an IC700™ process control system, ensure high productivity, user-friendly operation, and good mobility in tough crushing applications. The LT106 is also available with Metso’s Fleet Management technology, providing remote monitoring of functions, parameters, and location for more efficient operation. Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay

CRISP INDUSTRIES, INC. www.crispindustries.com 323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 Seguin, Texas 78155 • 830-372-1110

WHEELER CRUSHING SYSTEMS www.wheelercat.com/crushing 801-679-4721 info@wheelercat.com 451 North Lund Highway Cedar City, UT 84720 5300 West Wheeler Way Hurricane, UT 84737 239 North 1800 West Lindon, UT 84042 95 North 1000 West Logan, UT 84321 1831 S. Highway 191 Moab, UT 84532

2366 South 1900 West Ogden, UT 84401 1345 South State Street Salina, UT 84654 1345 South 1500 East Vernal, UT 84078 4901 West 2100 South Salt Lake City, UT 84120

WAGNER EQUIPMENT CO. www.wagnerequipment.com 18000 Smith Rd. • Aurora, CO 80011 303-739-3000 Burlington, CO 719-346-7880 Colorado Springs, CO 719-390-7316 Durango, CO 970-259-2001 Grand Junction, CO 970-242-2834 Hayden, CO 970-276-3781 Pueblo, CO 719-544-4433

Windsor, CO 970-278-1750 Yuma, CO 970-848-2911 Albuquerque, NM 505-345-8411 Farmington, NM 505-327-5331 Hobbs, NM 575-393-2148 El Paso, TX 915-821-7651

WESTATE www.westate.com 3809 Hwy. 312 • Billings, MT 59105 800-999-6676

Page 36 • May 28, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

www.everdigm-america.com EVERDIGM TOP-HAMMER Drill Rigs and Concrete Pumps are committed to keep you stronger than ever to perform the jobs by high productivity from ultimate power,environmentally & user friendly, product variety as total solution provider, incomparable durability and systemized service as real manufacturer.

Pitbull’s Plant Meets All Criteria for Wells Excavators PLANT from page 33

remove product from the screening plant and eliminate the need for a second operator. “Without the conveyor, with our type of soil conditions, if we were feeding the screening plant with an excavator, we would need to be continuously running a three-yard loader in order to keep up with the production.” Jim’s final criteria was that whatever machine he purchased would need to be transportable by a tri-axle dump truck. “In the fall of 2015, I heard about the Pitbull screener, a portable screening plant with a conveyor,” he said. “I contacted the manufacturer and they pointed me to their website, which included a video of the Pitbull screener at work. He watched the video on Pitbull’s website and could not believe what he was seeing. “Based on the video, I knew that it met some of my criteria, but a closer inspection would be necessary.” Jim contacted Lance Conley,

Pitbull’s master distributor, and found him to be very knowledgeable — and he was a New Hampshire native. “At this point, 2015 was nearing an end, tax season was approaching, and it was time to make a decision,” Jim said. “The people at Pitbull offered to bring a machine out for me to demo, but I decided that I would like to take a look at their facility first, so I made a trip to western Pennsylvania to check out the factory. I was told ahead of time that the plant was actually shut down for the holidays, but to my surprise when I arrived I was greeted by the owner of the company, its production manager and their master distributor. They showed me their fabrication facility and it quickly became obvious that this was a state-of-the-art steel fabrication plant and these people knew what they were doing. I walked from station to station down the production line and could see first-hand how the machines were built. The Pitbull was manufactured from heavy

“Pitbull offered to let me try out the plant and make some product with the agreement that if the machine did not meet my expectations and I chose not to buy it, I would pay nothing except the trucking to get it to our site and back.” Jim Wells Wells Excavators

high quality steel and that steel is properly reinforced at all of the stress points. It was very rugged looking and I could tell that it was built to last.” Jim added that he saw a wellengineered heavy-duty hydraulic conveying system that looked more than capable of keeping up with the screening plants’ production. The plant appeared to meet all of his criteria, including mobility. “Pitbull offered to let me try out the plant and make some product

with the agreement that if the machine did not meet my expectations and I chose not to buy it, I would pay nothing except the trucking to get it to our site and back,” he said. “As advertised, the Pitbull processed an impressive amount of material, just like Lance told me it would. After we demoed the Pitbull there was no question it was staying in New Hampshire. From our own production testing, we have found when we fed it with one of our 1 cubic yard excavators

we can process a bucket every 23 seconds. Under good conditions, we have been able to process 1,800 yards of material in a twelve-hour day; that’s 150 yards per hour. The conveying system can make for a one-operator, one-machine process. We’ll often run 2 machines when processing, but if I have a man with some idle time during the week I can send him to the pit and process loam or gravel alone.” Wells Excavators has put approximately 600 hours on the Pitbull plant with absolutely no downtime other than maintenance, according to Jim. “At one point we did change out the screens to make different sized product and that was no more than a half hour process.” For more information on Pitbull screener, visit www.pitbullscreeners.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2017 • Page 37

CRUSHING

MA ATERIAL TERIAL HANDLING HAN NDLING

SCREENING

TRACKS

www.modernmachinery y.com

WASHING W ASHING & CLASSIFYING CL LASSIFYING

970-259-0455 970 259 0455 307-634 307 634 4-5149 4 5149 www.powermotivecorp.com p p

The complete source for equipment in th he aggregate, construction and recycling industries. tries. Offering industry-leading brands such as the Piioneer Jaw Crusher, Kodiak® Plus Cone Crusher, SuperS Stacker® ® ® ® Extendable Stacker, ProSizer Mobile Screening g Plant, Combo Screen, Vari-Vibe a High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 0 equipment, Fast Trrax, Global Track and FastPack.

www.k kpijci pijci.com com

Page 38 • May 28, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Crushing plants in the EVO series are characterized by their good transport properties, flexible fields of application, and high performance with low consumption.

Kleemann…

Mobile Cone Crusher Can Work With External Power Supply Kleemann’s MOBICONE MCO 11i PRO mobile cone crusher is designed for tough and demanding quarry applications, is powered by a diesel-electric drive and achieves an output of up to 518 tons (470 t) per hour. The plant also can be equipped with an external power supply for even more efficient operation. As the hydraulics are installed in the lower part of the plant, the MCO 11i PRO has a low center of gravity, and thus more stability, reducing noise and vibrations to a minimum. All plant components can be easily reached from the ground or via spacious work platforms for maintenance work and refueling the plant. Simple Control With SPECTIVE With SPECTIVE, Kleemann presents its new, intuitive control concept for the first time. SPECTIVE is simple to

understand and supports the operator in his or her work. The use of clear symbols makes all plant functions recognizable at a glance. Only the information relevant for the machine operation is displayed. Similar in presentation to a smart phone, the operator is guided by the control system, reducing the potential for operating errors. In addition, data relating to the machine operation can be retrieved via the control system, and the levels of diesel and lube oil, for example, can be viewed in the plant cockpit. SPECTIVE is available initially for the MOBICONE MCO 11i PRO and the latest impact crushers in the MOBIREX MR EVO2 series. Innovative and Versatile: The EVO Series Owing to their compact dimensions, the plants in the EVO series are easy to transport and can be deployed efficiently,

making them an attractive and popular crusher choice for contractors. The MC 110 Zi EVO mobile jaw crusher, the MR 130 Zi EVO2 mobile impact crusher, and the MCO 9 Si EVO mobile cone crusher all have an integrated diesel direct-electric drive concept, which makes possible high performance with economical power consumption at the same time. These crushing plants are equipped with the continuous feed system (CFS) for optimal operation, controlling the speed at which the material is conveyed in relation to the crusher fill level. For more demanding, multistage crushing processes, the plants can be optimally interlinked via the control system, and work very well when combined. For more information, visit www.kleemann.info. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

With the SPECTIVE control concept all plant functions for the crushing plants are recognizable at a glance.

The new mobile cone crusher MOBICONE MCO 11i PRO has a very robust design and impresses with its high performance in quarrying applications.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2017 • Page 39

THIS IS HOW WE CRUSH EVERY JOB, EVERY DAAY! Y!

Screen Machine products are better by design, by manufacture and by performance: • 50+ years in business • American-Made in Columbus, Ohio, USA • Assembled with US-made Grade 80 steel — the strongest g and most durable available! • Patented innovation available nowhere ere else

For your crushing and screening needs, choose the best — Screen Machine — and CRUSH EVER RY Y JOB! Select Dealer Opportunities Avvailable

American-Made Innovation Since 1966 800 837 3344 800-837-3344

7740-927-3464 40 927 34644 40-927-3464

email@screenmachine.com email@screenmachine com

Learn more more at www www.screenmachine.com screenmachine com

Page 40 • May 28, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Welcomes PacWest Machinery to Dealer Network Metso continues to strengthen its North American distributor network with the recent addition of PacWest Machinery based in Seattle, Wash. PacWest Machinery will offer Metso’s crushing and screening products to all customer segments (quarry, contractor and recycle) in eastern Washington, northern Idaho and northeastern Oregon. In addition, PacWest Machinery will offer Metso’s crushing and screening products to contractor and recycle customers in western Oregon and western Washington. Miller Machinery will continue serving the quarry customers in the same western areas. “We are pleased to welcome PacWest Machinery as a new Metso distributor,” said Ben Hansbury, vice president, distribution sales of Metso. “With PacWest Machinery’s industry experience and demonstrated commitment to customer success, we know they can provide Metso equipment users with superior sales, parts, and service support.” “We are excited about the opportunity to represent Metso,” said Jolene Logue, president of PacWest Machinery. “Adding Metso’s crushing and screening equipment complements our offering and, most importantly, will help us continue to provide highquality products and services to our cus-

PacWest Machinery will offer Metso’s crushing and screening products, including the Lokotrack LT106 jaw plant and the LT220D combination cone crusher and screen plant.

tomers.” PacWest Machinery provides sales, rental and aftermarket support for a full line of general production, road machinery, compact

equipment and specialty machines from leading suppliers including Volvo Construction Equipment, Roadtec, GOMACO, Etnyre, Tymco, SDLG, Furukawa,

Genesis and others. PacWest Machinery provides equipment and aftermarket services from four facilities located in Seattle and Spokane, Wash., and Portland and Eugene, Ore., plus responsive support from remote service technicians and an extensive mobile service fleet. PacWest Machinery is owned by the Joshua Green Corporation and company management. Metso is an industrial company serving the mining, aggregates, recycling, oil, gas, pulp, paper and process industries. It helps customers improve their operational efficiency, reduce risks and increase profitability by using its unique knowledge, experienced people and innovative solutions to build new, sustainable ways of growing together. Its products range from mining and aggregates processing equipment and systems to industrial valves and controls. Its customers are supported by a broad scope of services and a global network of more than 80 service centers and about 6,000 services professionals. For more information, visit metso.com and volvoce.com/united-states/enus/pacwest/. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Sennebogen 8130 EQ Helps Recycling Company Stay Ahead Scholz Recycling GmbH & Co. KG is not your grandfather’s scrap yard. Having the most modern and efficient equipment is essential in an industry that now produces the world’s leading recycled material. Every second ton of steel produced in the world today is made from recycled metal. The addition of the new pedestal-mounted Sennebogen 8130 EQ material handler is a leading example of the innovative efficiencies that keep the Scholz Recycling scrap yard one of the largest and most productive in all of Europe. Approximately 44,092 tons (40,000 t) are handled per month at the modern facility.

The Sennebogen 8130 EQ, powered by a 175 hp (130 kW) electric motor, operates both quietly and efficiently as a prime material handler at the Scholz Recycling yard in Espenhain, Germany.

The Entire Package Convinces Scholz The Sennebogen 8130 EQ leverages a sophisticated balance principle which, when combined with the machine’s electric drive, can save up to 75 percent in operating costs compared to traditional material handlers of similar size, according to the manufacturer. Incorporating the equilibrium principle, the 8130 EQ maintains perfect balance and puts all its energy into handling the load. To achieve moving 88 to 110 tons (80 to 100 t) handled per hour the power is provided by a highly efficient, environmentally-friendly 175 hp (130 kW) electric motor. Although already familiar with the equilibrium principle, Scholz Recycling officials admit they required additional reassurance before purchasing such a large-scale machine as the Sennebogen 8130 EQ, which features an 89 ft. (27 m) boom equipped with an orange peel grap-

ple. “Sennebogen finally convinced us with an overall concept. The decision was based on a detailed competitor analysis, visits to customers in Germany and Turkey, and finally a visit to the Sennebogen production facility in Straubing, Germany,” said Mike Sommer, site manager. “The sturdy design, a quick operating speed, high range, as well as good energy balance, were all important factors.” Operators Give Their Thumbs-Up Working in a three-shift operation, the new Sennebogen 8130 EQ loads 22,046 tons (20,000 t) of scrap per month into a large stationary shear that serves as the centerpiece of the Scholz Recycling process. In spite of the high work demands, the comfort of the machine is second to none, reports its operators. “Thanks to the electric motor, this machine has low vibrations and does not require a fuel stop. Additionally, the service intervals are longer than those of diesel machines,” said operator Michael Chiemelski. “In short, the machine is simply more reliable to run and I am able to fully focus on my work.” For the Sennebogen 8130 EQ operators, an optimal view of the work area from the cab is enhanced by the onboard cameras and comprehensive LED lighting system package, notes Sommer. For more information, visit www.sennebogen-na.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2017 • Page 41

CUTTING EDGE SUPPLY 234 East O Street • Colton, CA 92324 800-949-9014 • Fax: 909-825-4569 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303

CRISP INDUSTRIES, INC. www.crispindustries.com 323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 Seguin, Texas 78155 • 830-372-1110

Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.

A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates

COMPASS EQUIPMENT www.compassequip.com 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 • Fax: 530-533-7657

WHEELER CRUSHING SYSTEMS www.wheelercat.com/crushing 801-679-4721 info@wheelercat.com 451 North Lund Highway Cedar City, UT 84720

2366 South 1900 West Ogden, UT 84401

5300 West Wheeler Way Hurricane, UT 84737

1345 South State Street Salina, UT 84654

239 North 1800 West Lindon, UT 84042

1345 South 1500 East Vernal, UT 84078

95 North 1000 West Logan, UT 84321

4901 West 2100 South Salt Lake City, UT 84120

1831 S. Highway 191 Moab, UT 84532

WESTATE www.westate.com 3809 Hwy. 312 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553

#TheMetsoWay

Page 42 • May 28, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

164 S. Michigan St. • Seattle, WA 98108

(206) 264-85651 info@evergreen-tractor.com

www.Evergreen-Tractor.com

Heavy Equipment Sales & Rentals

2016 TEREX FINLAY J1175 P.O.R. 30”x42” Chamber C/W Over Band Magnet, Radio Remote, Bypass Conveyor, Deflector Plate, Rip Stop Belt, hopper Extensions, Hydraulic Raise- Lower of Main Conveyor Telemetry, Tier 4 Final Engine

2017 TEREX FINLAY TC65 P.O.R. 65’ x42’ C/W Hopper Extensions, Impact Rollers, Full Length Skirting, Tier 4 Engine

2016 TEREX FINLAY 893 P.O.R. 6’20’ 2 Deck, hydraulic Tension Bottom Deck, Hydraulic Cleaning Brush, Folding Hopper Extensions, 10mm Abrasion Retain Hopper Plating

2013 TEREX FINLAY C1540 $467,500 L.K.E. Sale 40" Cone Chamber, Metal Detector Tier 4 Engine

2008 CAT 972H $149,900 9499 Hours, C/W 95% 26.5x25R L4 Tires Coupler and Plumbing

2011 MOROOKA MST1500V Sale Price: $86,500 1460 Hours, Enclosed Cab, A/C & Heat QTY 3 Available

2012 CAT D6T XL Sale Price: $194,500 Enclosed Cab, Semi U Dozer, Multi Shank Ripper, U/C 90%, Diff Steer, Hours: 4,267, Serial Number: D296

2015 TEREX FINLAY I110RS P.O.R. Equipped w/ Recirc. System, 5x12 Double Deck, 40" x 40" Tier 4 Engine

Fecon’s FTX128R Features Attachment Versatility Fecon Inc.’s FTX128R rubber-tracked mulcher utilizes a heavy duty bogie roller system and metal imbedded rubber tracks. The FTX128R offers 23 in. (58 cm) of ground clearance, powerful steering, excellent traction, and a psi of 4.5 for responsive handling in soft wet conditions. The FTX128R is ideal for right of way clearing where working on both Fecon Inc.’s FTX128R rubber-tracked mulcher utilizes a sides of the road is neces- heavy-duty bogie roller system and metal imbedded rubsary, or for moving a short ber tracks. distance to the next clearconstruction related attachments to make the ing site. The ride quality is smooth with FTX128R the best choice for mulching, tree excellent performance on or off pavement, shearing, stump grinding and even asphalt according to the manufacturer. milling with wider cold planers. The FTX128R features attachment versaFor more information, call 800/528-3113 tility with a quick attach coupler combined or visit www.fecon.com. with up to 60 gpm of in cab adjustable high (This story also can be found on flow and optional pressure adjustment. Construction Equipment Guide’s website at Fecon also supplies many forestry and www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 43

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 10-11 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 10-11 DH Call McLaren 888-492-4230

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 10-11 DH Call McLaren 888-492-4230

Serving the Construction Industry Since 1989 Trench Shoring - Confined Space - Pipe Plugs Rentals - Sales - Service 10-11 PK 800-828-8505

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

CLASSIFIEDS

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states .............................................................Call

For more information, call Construction Equipment Guide today at

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us

800/523-2200

11-12 TM

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 Call 949-833-3222 Ext 108

EXCAVATORS

LOADERS

TRAILERS

Hydraulic Excavators

Backhoe Loaders

Dump Trailers

Would you like

'05 Komatsu PC160 LC-7 Cab/AC, 16' Boom, 8'6'' Arm, 23.5 Shoes, 6,500 hours........ .................................. $79,500.

1997 Case 580L, OROPS, 2WD, 24'' Bucket, 3 Stick controls, 11 L x 16.5L-F-3 Front tires, 19.5L x 24 Rear tires, 4 Cyl. Case Eng, 5,297 hrs........ .................................. $17,500.

2015 Big Tex Dump, Stk #10249, 25,900 lbs, GVWR, Net Pay Load, 17,340 lbs, 48'' Spread Axle, 20ft L / 4ft Walls, 7'9'' W, folding rear gate, w/ heavy duty ramps, D rings inside trailer, ST235/85R16 Ries, Front tool box.. $14,500.

YOUR COMPANY

'04 Komatsu PC300 LC-7 Cab/AC, 33.5 Tracks, 13' Arm, JRB QC, Aux Hyd, 8,600 hrs.. .................................. $99,500.

Hendrix Machinery, LLC 1-936-327-5430

PARTS

Hendrix Machinery, LLC 1-936-327-5430

Rubber Tracks

TRENCHING EQUIPMENT Trenchers

2013 John Deere 17DX, OROPS, Aux Hyd, Front blade, 1,071 hours.............. $19,500.

OEM Tracks, Stk# 9762, New original excavator tracks, 28'' Pads, 49 Links, 190MM pitch, Cat, Komatsu, Hitachi, Volvo, Kobelco, Case, Link-Belt and others.......................... $7,500.

Hendrix Machinery, LLC 1-936-327-5430

Road Builders Machinery & Supply Co., Inc. 866-485-7180

Mini Excavators

Vermeer Model# V120 Rock Saw with wheel attachment (1,551 hours) Vermeer Model# RTX 1250 Rock Saw with wheel attachment (634 hours)

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 10-11 EB

featured in Construction Equipment Guide? If so, please contact us:

DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?

$40

ONLY

Construction Equipment Guide is THE Place to List It!

2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.

Call 800-523-2200

or go online to place your ad

470 Maryland Drive, Fort Washington, PA 19034

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

Page 44 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: USED PORTABLE ASTEC ASPHALT PLANT YEAR MODEL 2000 OR NEWER ASTEC, 300 TON PORTABLE DRUM MIX ASPHALT PLANT - PORTABLE FIVE BIN COLD FEED SYSTEM - PORTABLE RAP SYSTEM - PORTABLE SELF-ERECTING SILO USED SURGE SYSTEM (ASPHALT SILOS) - 2 -200 TON SILOS - TRAVERSE CONVEYOR - 36’ DRAG SLAT CONVEYOR - 100’ TRUCK SCALES CONTACT: COLLEEN DOUTY (PH: 214-226-6867) EMAIL: CDOUTY@ OVERLANDCORPORATION.COM FAX: 214-226-6867 –––––––––––––––––––––––––––––––– WANTED: NEEDED BÙLLDOZER NEEDED BULLDOZER KOMATSU 275,375,475 ENC CAB WITH RIPPER 2012 USA LOCATION MUST NE UNADVERTISED PLEASE CONTACT: JEAN MAURICE BOUTIN (PH: 450-346-8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 410 BACKHOE CASE 580 BACKHOE 1998 TO 2007 CONTACT: ROGER PH: 810-845-4540 EMAIL: RSTUDLEY@COMCAST.NET FAX: 810-845-4540 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER NEEDED USA LOCATION BULLDOZER KOMASTU 2014 AND UP 155 275 375. 475 ENV WITH RIPPER D10N D10R D10T D11N D11R D11T ENC ÇAB WITH RIPPER OR REPOSSES BANK OR LIEN CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL TD20C DOZER & INTERNATIONAL 250E LOADER RUNNING OR NOT, FOR PARTS! CONTACT: ALBERT HARLOW (PH: 267-738-5984) –––––––––––––––––––––––––––––––– WANTED: FORGING PRESSES LOOKING FOR FORGING PRESSES, 1350 TON, 1600 TON AND 2500 TO 4000 TON ALL MECHANICAL CONTACT: HERB KAISER (PH: 248-680-1000) EMAIL: HERB@GIBBSIND.COM –––––––––––––––––––––––––––––––– WANTED: 2 CATERPILLAR 740B ARTIC TRUCKS LATER MODEL, MAX 5000 HOURS, USA LOCATION CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 615 DIFF LOCK ASSEMBLY 615 PART #9V1761 FOR EVERYTHING, BOLTS TO SIDE OF CARRIER, RING PINION SHAPE DOES NOT MATTER CONTACT: DONNIE CHENEY (PH: 229-881-0751) EMAIL: DONNIECHENEY@YAHOO.COM FAX: 229-849-2191 ––––––––––––––––––––––––––––––––

WANTED: LOOKING FOR LATE MODEL BACKHOE ASAP IN TEXAS I'M LOOKING FOR 2000-2010 COMPLETE BACKHOE ASAP! PLEASE AUCTION PRICES ONLY. I'M A DEALER SO NO RETAIL, I'M LOOKING TO PURCHASE IN QTY IF THE PRICE IS RIGHT. LOOKING FOR UNITS IN THE TEXAS AREA IF POSSIBLE. I HAVE CASH TODAY!! NOTE: CAN BE IN WORKING OR NON WORKING CONDITION. CONTACT: MATTHEW (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 WANTED TO BUY HITACHI EX200, EX200-1, EX270, EX400 AND EX400-1. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 140G, 140H RUNNING OR NON-RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: RUNNING OR NON RUNNING MACHINES!!!! CAT WHEEL LOADER 936, 950, 950B, 950E, 950F, 966D, 966E, 966F AND 966G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM (PH: 713-855-6170) EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: 2002-2005 VERMEER HG 365 GRINDER PARTS UNIT I AM LOOKING FOR A 2002-2005 VERMEER HG 365 GRINDER UNIT FOR PARTS ONLY. I HAVE A COUPLE OF UNITS I'M LOOKING TO PUT TOGETHER. I'M A SERIOUS BUYER AND LOOKING TO ACT FAST. DOESN'T MATTER WHAT'S WRONG, DON'T CARE ABOUT THE HOURS. CONTACT: JAMES (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: GP 7.5 CUBIC YARD BUCKET FOR CAT 980G/H/K WE ARE LOOKING FOR CAT 980G/H/K 7.5 CUBIC YARD GP BUCKET WITH BOE (BUCKET ONLY). OTHER MAKES OF THE SAME SIZE BUCKET ARE ACCEPTABLE. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. CONTACT: ROY FOLLICK (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM ––––––––––––––––––––––––––––––––

WANTED: INTERNATIONAL 260A BACKHOE ANY CONDITION CONTACT: RUDY (PH: 732-921-1314) EMAIL: CRUTILITIES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: HYDRAULIC PUMP FOR 2700 Q LINK BELT CONTACT: TONY STEFFES PH: 414-651-7336 EMAIL: STEFFESANTHONY@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LINKBELT CRANES LINKBELT MODEL 48A OR LS68, LS78, LS 98, OR LS108. OPERATING OR PARTS MACHINES CONTACT: WILLIAM TAYLOR PH: 609-868-0326 EMAIL: TAYLORSCRANESERVICE@GMAIL.COM FAX: 856-468-5742 –––––––––––––––––––––––––––––––– WANTED: FORD BACKHOE 455C I AM LOOKING FOR A TECHNICIAN FAMILIAR WITH THE ENTIRE ELECTRICAL SYSTEM OF A FORD BACKHOE 455C. THE MACHINE IS LOCATED IN CONSHOHOCKEN, 19428 CONTACT: JON NEVE PH: 610-828-9869 EMAIL: JAMESJNEVEINC@GMAIL.COM FAX: 610-828-0382 –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDING TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION, IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: HORIZONTAL DIRECTIONAL DRILLS I AM CURRENTLY LOOKING TO PURCHASE HDD UNITS ASAP! ANYWHERE IN THE U.S. CAN BE WORKING OR BROKEN. MUST HAVE LOW MILES AND RODS AND BASKET MUST BE IN PLACE. I WILL PAY FOR SHIPPING. MUST HAVE FULL SPECS AND PHOTOS READY. CONTACT: MATTHEW STEVENSON PH: 346-230-4485 EMAIL: MATT.TURBOWELDINGSVC@GMAIL.COM FAX: 346-230-4485 ––––––––––––––––––––––––––––––––

WANTED: DRESSER TD 20 G W/EROPS DOZER WITH NO MORE THAN 5000 HRS. SEMI-I BLADE PREFERRED. CONTACT: RANDY MYERS PH: 785-948-2231 EMAIL: RANTAW@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BUCKETS FOR 322/325 CAT EXCAVATORS EXCAVATOR BUCKETS CAT 322/325 WITH 80MM PINS CONTACT: KEN PH: 330-219-1003 EMAIL: KRV8815@MSN.COM –––––––––––––––––––––––––––––––– WANTED: ATTACHMENTS INTERNATIONAL WANTED TO BUY ATTACHMENTS INTERNATIONAL SEVERE SERVICE DEMOLITION GRAPPLES FOR 46-62,000 WEIGHT EXCAVATOR. WOULD CONSIDER LABOUNTY. PHOTO AND PRICE PLEASE. CONTACT: AMIE PH: 218-863-6444 EMAIL: AMIE@ATTACHMENTSINTL.COM –––––––––––––––––––––––––––––––– WANTED: LARGE SAND OR MASS EXCAVATING BUCKETS WANTED TO BUY LARGE SAND OR MASS EXCAVATING BUCKETS. PREFER ATTACHMENTS INTERNATIONAL OR EMPIRE. MUST BE REBUILDABLE. PHOTO AND PRICE PLEASE. CONTACT: SHANA PH: 218-863-6445 EMAIL: SHANA@ATTACHMENTSINTL.COM –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT MANUALS BUYING NEW OR USED CONSTRUCTION AND AGRICULTURE SERVICE, PARTS AND OPERATOR MANUALS. EQUIPMENT DEALERS & PRIVATE COMPANIES, IF YOU HAVE MANUALS JUST SITTING ON THE SHELF AND YOU NO LONGER NEED THEM, PLEASE GIVE ME A CALL OR EMAIL. I BUY LARGE AND SMALL LOTS. JOHN DEERE CAT, KOMATSU, CASE, NEW HOLLAND, VOLVO, DOOSAN AND SO ON. CONTACT: JOHN WHITNEY PH: 530-864-0771 EMAIL: WHITNEYJ65@YAHOO.COM FAX: 530-864-0771 ––––––––––––––––––––––––––––––––

YANMAR MODEL 55R TRACK CARRIER/DUMP -LOOKING FOR A MACHINE FOR PARTS -CAN BE BURNT OR WRECKED. CONTACT: TIM LEWANDOWSKI (PH: 724-640-4396) EMAIL: LEWEQUIP.BRANDON@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LATE MODEL TANDEM AXLE MACK DUMP CONTACT: CHRIS MCPHILLIPS (PH: 610-8647529) EMAIL: MCPHILLIPSCJ@AOL.COM FAX: 610-7893076 –––––––––––––––––––––––––––––––– WANTED: AT 422 GROVE CRANE TRANSMISSION CONVERTER AND TRANSMISSION CASE (COMPLETE WITH ALL GEARS) FOR A 1989 GROVE AT-422 CRANE. SERIAL #69502, MODEL 4425 G CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 –––––––––––––––––––––––––––––––– WANTED: USED SWINGER 200/220 REAR AXLE USED SWINGER 200/220 REAR AXLE. DANA MODEL 60 OR 70 TRAC LOCK AXLE CONTACT: GERRY (PH: 218-863-6445) EMAIL: ATTINTL@LORETEL.NET –––––––––––––––––––––––––––––––– WANTED: BOBCAT 863 LOOKING FOR A LOW HOURS MACHINE, HYD STABILIZER A PLUS. CONTACT: WILLIAM TEETERS PH: 715-563-7162 EMAIL: BILLT_54726@YAHOO.COM FAX: 715-563-7162 –––––––––––––––––––––––––––––––– WANTED: TRIAXLE ROAD TRACTOR DAY CAB TRIAXLE ROAD TRACTOR FOR HEAVY HAUL 240-250INCH WHEELBASE DOUBLE FRAME 500PLUS HP 18 SPEED DAY CAB 20K PUSHER NEWER NO RUST CONTACT: JOE PH: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED: 785 SKID STEER LOADER, NEW HOLLAND STOLEN FROM HARLAN MIDDLEBROOKS IN 2013 IN FLINTSTONE, GA. SERIAL NO. 820904. 1992 YR. HAD CLAM BUCKET ON IT. REWARD FOR INFORMATION. MAY BE IN TN, GA, OR KY. PLEASE HELP. THANK YOU. CONTACT: PAUL MIDDLEBROOKS PH: 423-580-5078 EMAIL: PAULMIDDLEBROOKS@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: RADIATOR FOR A LINKBELT 40 TON CRANE NEEDED, RADIATOR FOR A 1980 40 TON LINKBELT RT CRANE. MODEL # HSP8040 CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 ––––––––––––––––––––––––––––––––

WANTED: TWIN 44 WASH PLANT, SAND LOOKING TO BUY USED TWIN 44 WASH PLANT FOR SAND. EMAIL PICTURES, DETAILS, PRICE AND LOCATION. CONTACT: MICHAEL BUHLER PH: 814-637-5599 EMAIL: NORTHSTARAGG@ WINDSTREAM.NET FAX: 814-637-5598 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADER 140G LOOKING FOR USED CONSTRUCTION EQUIPMENT IF YOU HAVE ANY OF THESE IN YOUR INVENTORY PLEASE CONTACT ME THROUGH EMAIL OR MY PERSONAL CELL NUMBER. BELOW IS MY REQUIRED MACHINERY LIST. WHEEL LOADER (CATERPILLAR), ROLLERS (DYNAPAC), MOTOR GRADERS (CATERPILLAR), EXCAVATORS (HITACHI). MODEL1. 930 2. 950B 3. 950E 4. 966F 5. 966F(II) 1. CA301 2. CA251 3. CA262 4. CA602 5. CA362 CONTACT: ILYAS KHAN PH: +923322489350 EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: JCB ROPS/FOPS CONTACT: ROBT. EMAIL: DEN_AYE@YAHOO.COM FAX: 215-757-3665 –––––––––––––––––––––––––––––––– WANTED: CASE 1150C DOZER 34X6 PYRAMID SHOES NEED 2 SOME CALL THEM ATEX SHOES. CONTACT: DAVID RESTER PH: 901-490-8888 EMAIL: HIGHFLYR@BELLSOUTH.NET FAX: 731-635-3366 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE EXCAVATOR & LOADER I HAVE AN IMMEDIATE NEED FOR AN EXCAVATOR AND POSSIBLY A LOADER IF THE PACKAGE IS PRICED RIGHT. PLEASE ONLY OFFER MACHINES THAT FIT REQUIREMENTS. COULD BE ANY OF THESE MODELS ZERO TAIL OR TRADITIONAL WITH THE FOLLOWING OPTIONS: DEERE 225D OR 245G, 240D OR 250G, 270D OR 290G. UNDER 3500 HRS, LONG STICK, HYD THUMB, HYD COUPLER, BEST PRICE. DEERE 644K OR 724K. UNDER 4000 HRS, HYD COUPLER, RIDE CONTROL, BEST PRICE. PERFER WESTERN OR MIDWEST US FREIGHT LOCATION. CONTACT: CALEB COLBORN PH: 208-757-3564 EMAIL: CALEB@DOUBLEEDGE EQUIPMENT.COM FAX: 208-403-0363 –––––––––––––––––––––––––––––––– WANTED: KOMATSU EXCAVATOR PC300-5 & PC300-6 WANTED TO BUY KOMATSU EXCAVATOR PC300-6 CONTACT: ABDAL PH: 415-687-0337 EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT 950B AND 950E I AM LOOKING FOR 950 B AND 950E CONTACT: ALI PH: 206-802-5306 EMAIL: PIGL_PK@YAHOO.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 45

City Eyes Boost to Local Economy With ART Project

CONST RUCTION N EQUIP PMENT

AU UCT TIO ON

TRANSIT from page 32

THURSDA AY, JUNE 8 | 10 a.m. CDT

Central Avenue puts a significant dent in future congestion because it enables more people to use transit or other modes of transportation, including walking. Zero Emissions Buses Each ART bus will have seating for 40 to 50 people, depending on the number of wheelchair positions and bikeholding positions. The buses are constructed by BYD Motors Inc. of Los Angeles. The company’s motor factory is in Lancaster, Calif. BYD Motors is maker of ZeroEmissions Battery Buses. ART planners determined that the Central Avenue corridor has the ridership, population density, land uses and activity centers to support a successful bus rapid transit line. They point to successful similar corridors with successful bus lines in Ft. Collins, Colo., and in Cleveland. The current Central Avenue bus line is hampered by traffic and delays at busy intersections as well as slow boarding times. The ART bus system will bring numerous changes to Central Avenue including canopy-covered bus stations with ticket machines and seating, a new roadway surface from curb to curb, wider sidewalks in some areas, improved sidewalk lighting, station lighting, security cameras, emergency call boxes, public art, new trees and landscaping, narrower streets and slower car traffic. The narrower streets help to provide space for outdoor café seating. ART Could Help Real Estate, Jobs Market Albuquerque Rapid Transit is expected to provide a boost to the local economy. A NAIOP (National Association for Industrial and Office Parks) study determined that development along the ART route could increase demand for housing in the area. New jobs would also be created, according to the findings. The study shows potential for $900 million in new development and 5,000 new jobs as the result of ART. The project is expected to encourage transit-oriented development. A transit-oriented development is a mixed-use area located within close proximity to a transit stop or line, normally with a core commercial area that is pedestrian-friendly. Transit oriented development often focuses on a half-mile area, which is generally considered to be walking distance around a transit station. Businesses to Remain Open During Construction Meanwhile, businesses along Central Avenue face the inconvenience of a major construction project. ART officials report that one lane will be open in each direction at all times in front of businesses. ART also will be working with business owners to ensure consumers know that the businesses are open. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

4 SELLING!

DB3936 ‘07 Case 580 Super M Series II backhoe

DB3939 ‘95 Galion 850B motor grader

DH9289 ‘94 Caterpillar D4C Series III dozer

DA3482 ‘08 Skyli D M Mini-Derrick 33 digger

DB3938 ‘87 Bomag BW213PD compactor

CC9186 Cedarapids CR461 Greyhound paver

DA0686 ‘00 Load King 403/4DFPR trailer

DA6164 ‘02 International D F F4900 dump truck

DB0156 ‘95 Caterpillar 980G wheel loader

DM9602 Baraga SS636 telehandler

L3126 Cedarapids jaw crushing plant

140+ ITEMS SEL LL REGARDLESS OF THE PRICE!

Including: ding: TRENCHERS: ‘01 Ditch Witch 3700, Ditch Witch 4010DD EXCA E AVATORS: ‘04 IHI 30NX-2 compact, act, ‘01 Komatsu PC200LC, PC200L Komatsu PC138USL PC138USLC TELEHANDLER: Baraga SS636 SKID STEER: ‘00 John Deere 260 LOADER: ‘95 Cateerpillar 980G TRAILERS: ‘15 Load Trail T dump, ‘95 CZ Engineering C218KT equipment DUMP TRUCKS: ‘97 Mack CH613, ‘94 Internatio onal 8100 SERVICE TRUCK: ‘99 International ternational 8100. 10% buy buyers premium applies. Aaron McKee TX X Lic #16401. 866.608.9283

purplewave e com e.com

Page 46 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Jobs…

Employment Increases in 224 Out of 358 Metro Areas Construction employment increased in 224 out of 358 Charles, La. (21 percent, 4,000 jobs); Redding, Calif. (19 cent). The largest percentage decreases for the year were in metro areas between March 2016 and March 2017, declined percent, 500 jobs); Gary, Ind. (17 percent and 2,400 jobs) Danville, Ill. (minus 20 percent, minus 100 jobs); Casper, Wyo. (minus 19 percent, minus 600 jobs); Gulfport-Biloxiin 92 and stagnated in 42, according to a new analysis of fed- and Santa Cruz-Watsonville, Calif. (17 percent, 700 jobs). The largest job losses from March 2016 to March 2017 Pascagoula, Miss. and Charleston, W.V. (minus 17 percent, eral employment data released May 2 by the Associated minus 1,300 jobs). General Contractors of America. Association officials Association officials said the Trump administranoted that a recent proposal by the Trump administration’s new proposed tax reform principles could help tion to reform the tax code for businesses, including boost demand for construction and employment in the pass-through entities, should help boost demand for new construction and make it easier for firms to expand “Reforming the tax code should help sector. The association has long called for reforms not just to the corporate tax rate, but also to the rate passpayrolls in the future “Reforming the tax code should help boost demand boost demand for construction by through entities, including the majority of construction for construction by freeing up significant amounts of freeing up significant amounts of firms, pay. The Trump administration’s proposal to cut the rate all businesses pay will help free up privateprivate sector capital to finance new projects,” said Stephen E. Sandherr, the association’s chief executive private sector capital to finance sector capital for new construction projects, and provide firms with additional resources they need to officer. “Moreover, reducing the tax burden on conexpand payrolls, the officials added. struction employers will make it easier for them to add new projects.” “While there are a lot of questions that need to be new staff to keep up with growing demand for their Stephen E. Sandherr answered, the President has initiated what should be a services.” Associated General Contractors of America robust and productive debate about the best way to Riverside-San Bernardino-Ontario, Calif. (12,200 reform our dated tax code,” Sandherr said. “As an jobs, 14 percent) added the most construction jobs durindustry that pays among the highest effective tax rates ing the past year, followed by Atlanta-Sandy Springsin the country, the construction sector welcomes any Roswell, Ga. (9,400 jobs, 8 percent); Tampa-St. Petersburg-Clearwater, Fla. (8,600 jobs, 13 percent); were in Pittsburgh, Pa. (minus 2,900 jobs, minus 6 percent), effort to make taxes on employers more equitable and more Portland-Vancouver-Hillsboro, Ore.-Wash. (6,300 jobs, 11 followed by Boston-Cambridge-Newton, Mass. (minus reasonable.” For more information, visit www.agc.org. percent) and Dallas-Plano-Irving, Texas (6,000 jobs, 5 per- 2,300 jobs, minus 4 percent); Middlesex-Monmouth-Ocean, cent). The largest percentage gains occurred in the Lewiston, N.J. (minus 2,100 jobs, minus 6 percent) and Gulfport(This story also can be found on Construction Equipment Idaho-Wash. metro area (25 percent, 300 jobs); Lake Biloxi-Pascagoula, Miss. (minus 1,800 jobs, minus 19 per- Guide’s website at www.constructionequipmentguide.com.)

JCB Machines Play Important Role in ‘Alien: Covenant’ A fleet of more than 20 JCB machines is playing a starring role in the latest installment of a cult film franchise. JCB skid steer loaders, Loadall telescopic handlers and JS excavators were supplied to 20th Century Fox for the making of the new film “Alien: Covenant,” which was released in the United States on May 19. Starring alongside actors Michael Fassbender and Katherine Waterston, the machines are wrapped in stunning gold to give “This is one of the them a futuristic look — the idea of British film director and producer Ridley Scott. highest-profile film “This is one of the highest-profile film projects in JCB’s history, involving approximately projects in JCB’s $1.3 million worth of machines,” said Michael Plummer, JCB’s worldwide marketing director. history, involving “Ridley Scott’s idea to wrap the machines in approximately gold delivered a stunning result and is certainly an eye-catching addition to a film which will be $1.3 million worth seen by millions of people around the world.” The machines — which appear in the film's of machines.” finale — arrived at the movie set in Sydney with the help of JCB dealer Construction Equipment Michael Plummer Australia. The dealer also provided film makers JCB with six JCB generators for additional onsite power. The equipment is used in the so-called “terraforming bay,” an area which alters the environment to make it capable of supporting terrestrial life. “Alien: Covenant” is set almost 100 years in the future and is the sixth film in the popular “Alien” franchise. For more information, visit www.jcb.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

20th Century Fox photo

JCB machines star in the film “Alien: Covenant,” which hit cinema screens on May 19.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 47

JAMES G. MURPHY H CO.

NO MINIM MUMS - NO RES R ERVES V

PU UBL LI LIC C A AUC UC CT CTIO ON 9AM 9A 9 M - SA SA SATURD ATURD TTURD URD DAY DA AY A Y - JU JJUNE UNE U NE 10T 10TTH KENMO KENMO ORE RE H HEA EA AVY A V E VY EQU EQUIPMENT QUIIPMENT PMENT, CLES CONTTRA ACTO CTORS EQU CT EQU UIPMENT IPMENT & V VEH EHIIC ICLES 18 1 82 8 226 2 26 68T 68T 8TTH HA AVE. AV VE VE. V E. N NE NE, E, K KEN KENMORE, EN NMORE NMORE, MORE, WA WA

FOR MOR RE INFORMATIO ON GO TO MURP PHYAUCTION.C COM • PHONE 42 25-486-1246

Page 48 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Richmond, VA Wed., May 31, 2017 For: Liquidation. Crane, Construction Equipment & more • Buffalo, NY Sat., June 3, 2017 For: Job Completion, Construction Equipment & more • Lexington, KY Wed., June 7, 2017 For: Liquidation. Crane, Construction Equipment & more • Cleveland, OH Thurs., June 8, 2017 For: Complete Liquidation Ag & Construction Equipment • Parkersburg, WV Fri., June 9, 2017 For: Rental Return & Job Completion • Parkersburg, WV Sat., June 10, 2017 For: Classic Cars • Las Vegas, NV Sat., June 17, 2017 For: Very Large Rental Fleet Auction • Houston, TX Tues., June 20, 2017 For: Rental Fleet Construction Equipment & more • Atlantic City, NJ Sat., June 24, 2017 For: Very Late Model Rental Returns • Queretaro, Mexico Fri., June 30, 2017 For: Late Model Earthmoving Equipment & more • Detroit, MI Sat., July 8, 2017 For: Retirement Auction • Syracuse, NY Sat., July 15, 2017 For: Very Large Late Model Cat Rental Returns • Rutland, VT Sat., July 29, 2017 For: Complete Liquidation Retirement Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

June 23, 2017 • Salt Lake City, UT June 27, 2017 • Albuquerque, NM June 28, 2017 • St. Louis, MO June 29, 2017 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat, June 10, 2017 For: Monthly Public Auction • Riverside, CA Sat, June 17, 2017 For: Monthly Public Auction • Portland, OR Fri., June 30, 2017 For: Monthly Public Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Prospect, CT Sat., June 24, 2017 For: Construction Equipment

• Foley, MN Fri., June 9, 2017 For: Heavy Equipment, Truck & Trailer Auction

DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540

• Sacramento, CA Sat., July 8, 2017 For: Monthly Public Auction

• Philadelphia, MS July 19 - 20, 2017 For: Huge 2-Day Public Auction

BAY AREA AUCTION SERVICES www.bayareaauctionservices.com 800-452-3905

• Philadelphia, MS September 12 - 13, 2017 For: Huge 2-Day Public Auction

• Gibsonton, FL Tues., June 6, 2017 For: Bankruptcy Auction Patriot Metals BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Dallas (Anna), TX Fri., June 9, 2017 For: Construction Equipment BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY Thurs., June 1, 2017 • ONLINE ONLY Thurs., June 8, 2017 • ONLINE ONLY Thurs., June 15, 2017 • ONLINE ONLY Thurs., June 22, 2017 • ONLINE ONLY Thurs., June 29, 2017

• Philadelphia, MS November 15 - 16, 2017 For: Huge 2-Day Public Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 16, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., August 18, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., October 20, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., December 8, 2017 For: Truck, Trailer & Equipment

• Denver, CO June 1, 2017

• ONLINE ONLY Thurs., July 13, 2017

• Sacramento, CA June 6, 2017 • North East, MD June 6, 2017

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• Manassas, VA June 8, 2017

• ONLINE ONLY May 31, 2017

• Las Vegas, NV June 9, 2017

• ONLINE ONLY June 7, 2017

• Wasilla, AK June 10, 2017

• ONLINE ONLY June 14, 2017

• Atlanta, GA June 13, 2017

• ONLINE ONLY June 21, 2017

• Columbus, OH June 15, 2017

• ONLINE ONLY June 28, 2017

• Minneapolis, MN June 16, 2017

• ONLINE ONLY July 5, 2017

• Lewis Run, PA Thurs., June 1, 2017 For: Complete Liquidation Eastern Industrial

• Phoenix, AZ June 20, 2017

COMMOMWEALTH OF PA www.auctionsbygov.com 866-469-7383 • Harrisburg, PA Tues., June 6, 2017 For: Spring Heavy Equipment Auction

• Nashville, TN June 22, 2017 • Kansas City, MO

• ONLINE ONLY July 12, 2017 • ONLINE ONLY July 26, 2017 • ONLINE ONLY August 9, 2017

• Stanton, TX Wed., June 21, 2017 For: Permian Basin Absolute Public Auction

INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225 • Sebring, FL Sat., July 15, 2017 For: Construction & Agricultural

• Summerville, WV Tues., June 6, 2017 For: Fleet Reduction Auction

• Sebring, FL Sat., September 9, 2017 For: Construction & Agricultural

• Pelzer, SC Thurs., June 22, 2017 For: Summer Contractors Auction

• Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Shrewsbury, MA Sat., June 3, 2017 For: Utility & Construction Equipment

• Waxahachie, TX Thurs., June 15, 2017 For: Construction, Power line & Utility Fleet

• ONLINE ONLY June 28, 2017

• Semmes, AL Sat., June 10, 2017 For: Seized Vehicle & Equipment Public Auction

• Midland, NC Thurs., June 1, 2017 For: Construction Equipment, Trucks, Trailers & more

• ONLINE ONLY May 31, 2017

• ONLINE ONLY Thurs., July 6, 2017

• ONLINE ONLY June 1 - 13, 2017 For: Monthly Government Public Auction

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888

• Portland, OR Thurs., June 8, 2017 For: Construction, Power line & Utility Fleet

• ONLINE ONLY June 14, 2017

• ONLINE ONLY June 1 - 7, 2017 For: Absolute Van Trailer Public Auction

• Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction

HOUSBY AUCTIONS www.housby.com 866-218-6266

• Lexington, KY May 31, 2017

• Houston, TX June 21-22, 2017

• Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

• ONLINE ONLY May 20 – June 16,, 2017 For: Construction, Power line & Utility Fleet & Equipment • Riviera Beach, FL Sat., June 17, 2017 For: Construction, Power line & Utility Fleet & Equipment

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., June 13, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., July 11, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., August 8, 2017 For: Tractor, Farm & Construction Equipment MOTLEYS ASSET DISPOSITION GROUP www.motleys.com 1-877-MOTLEYS • Richmond, VA Tues., June 13, 2017 For: Construction Equipment & Truck Auction

• ONLINE ONLY Thurs., June 15, 2017 For: Truck & Trailer Auction • ONLINE ONLY Thurs., June 22, 2017 For: Construction Equipment • ONLINE ONLY Thurs., June 29, 2017 For: Truck & Trailer Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., June 10, 2017 For: Construction Equipment • ONLINE ONLY Sat., July 15, 2017 For: Construction Equipment • Lebanon, TN Sat., September 9, 2017 For: Construction Equipment SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • South Windsor, CT Sat., June 17, 2017 For: JDC Enterprises Liquidation Auction SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-676-9800 • ONLINE ONLY Tues., June 6, 2017 For: The Pete Clark Estate RTI AUCTIONS www.teitsworth.com 585-243-1563 • Arkport, NY Thurs., June 8, 2017 For: Liquidation: Covered Wagon Train Inc. WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., June 10, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers

• Plymouth Meeting, PA Thurs., June 24, 2017 For: Construction Equipment & Utility Fleet

NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322

J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085

• Wrentham, MA Sat., June 10, 2017 For: Major Heavy Equipment & Truck Sale

• Montgomery, AL June 13 - 15, 2017 For: 3 Day Trucks, Construction and Forestry

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Summersville, WV Wed., June 21, 2017 For: Complete Liquidation Mountain State Bridge Co. Inc.

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008

• ONLINE ONLY Thurs., June 1, 2017 For: Truck & Trailer Auction

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990

• Tamaqua, PA Wed., June 28, 2017 For: Surplus Liquidation Ankiewica Enterprises, Inc.

• Kenmore, WA Sat., June 10, 2017 For: Heavy & Construction Equipment & Vehicles

• ONLINE ONLY Thurs., June 8, 2017 For: Construction Equipment

• Saugatuck, MI Wed., May 31, 2017 For: Heavy Equipment Auction

• ONLINE ONLY Tues., June 13, 2017 For: Paving Retirement Auction

• Atlanta, GA Thurs., June 8, 2017 For: Heavy Equipment Auction

• ONLINE ONLY August 30, 2017 • ONLINE ONLY September 13, 2017 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., June 10, 2017 For: Construction Equipment & more

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 49

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Michigan Occupational Safety and Health Administration (MIOSHA) Coffee with MIOSHA MIOSHA invited employer and employees to share a cup of coffee and learn about the importance of workplace safety and health of Michigan workers. The Coffee with MIOSHA events will provide an informal opportunity for employers and employees to meet with MIOSHA representatives (Consultative, Enforcement & Radiation) and ask questions, obtain information on program services and resources, learn about MIOSHA Training Institute (MTI) opportunities, and establish rapport. Upcoming Dates & Locations: MAY 24, 2017 (GI & GS) American Society of Safety Engineers (ASSE) TBD Ann Arbor, MI JUNE 7, 2017 (GI) Michigan Safety Conference 333 W. Michigan Avenue Lansing, MI 48933 GI = General Industry Safety and Health focus CS = Construction Safety and Health focus Northeastern Forest Products Equipment Expo 2017 Show Start Date: 19 May 2017 Show End Date: 20 May 2017 Open To: Trade Visitors Location: Cross Insurance Center 515 Main Street Bangor, Maine 04401 Event Profile: Northeast Forest Products Equipment Expo 2017 is the premier logging, saw-milling and pallet equipment show. Northeastern Forest Products Equipment Expo 2017 to be held on 19-20 May 2017. The 2017 Expo features new exhibit space around the Cross Insurance Center, with a familiar layout of the parking area where the outside component of the Expo has traditionally been set up. This event showcases products from the Agriculture & Forestry Industry. The Show will exhibit forest products, wood, timber products, forestry service, lumber, plywood, panel and pallet manufacturing, treating, laminating, and processing machinery, processing equipment and supplies. Visitor Profile: Visitors such as manufacturers, suppliers, traders, distributors, retailers, key decision makers and much more. For more information on this Expo, contact: Pam Leach, Show Project Manager, Northeast Loggers Association, Inc., P. O. Box 69, Old Forge, Old Forge, New York 13420. Phone: 315/369-3078. Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL Show Start Date: 26 May 2017 Show End Date: 29 May 2017 Open To: Trade Visitors and General Public Location: Broward County Convention Center Fort Lauderdale, FL 33316 Event Profile: Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL is a home design exhibition. Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL is going to be held on 26-29 May 2017 at Broward County Convention Center, Fort Lauderdale, Florida. The Home Design and Remodeling Shows have a long-standing history in Miami and Fort Lauderdale for bringing the industry together with interested consumers of home improvements, interior design and remodeling. Meet face to face, with industry and retail customers ready to buy. For more information on this Expo, contact: Steve Plotkin, Show Project Manager. Home Show Management Corporation, 1450 Madruga Avenue, Suite 301, Coral Gables 33146. Phone: 305/6679299. 4th ANNUAL FLEXIBLE & COST EFFECTIVE WELL SITE FACILITIES ONSHORE 2017 DATES: 27 September to 28 September, 2017 PLACE: Houston, TX North America’s Only Initiative Dedicated Entirely to Facilities Engine Construction Association of Michigan CAM/HBA/AIA/SEMCOG Economic Forecast – June 15, 2017 The Mid-Year Economic Forecast and State of the Industry Breakfast 2017 Join the Construction Association of Michigan (CAM), the Home Builders Associatin of Southeastern Michigan (HBA), the American Institute of Architects (AIA), and Southeastern Michigan Council of Governments (SEMCOG), as we assess the national and regional perspectives of our economy and how it is affecting our industry. On THURSDAY, JUNE 15, 2017, these organizations will present the Sixth Annual Mid-Year Economic Forecast and State of the Industry Breakfast, at the Suburban Collection Showcase in Novi, Michigan. Tabletop displays will open at 7:30 AM and the breakfast program will follow from 9:00 to 10:30 AM. Contact Mary Carabott at CAM (248) 972-1000 for registration information. Registration deadline is Wednesday, June 8. The Associated General Contractors of America. For more information, contact AGC main office at 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201. Phone: 703/548-3118. Fax: 703/548-3119. Email: Info@agc.org. AGC – The Associated General Contractors of America AGC Safety & Health Conference Wednesday, July 19, 2017 to Friday, July 21, 2017 Denver, Colorado AGC of Minnesota 2017 – 2018 Scholarships AGC of Minnesota is pleased to announce that the 2017 – 2018 student scholarship application form is now available. The completed form and required information is to be submitted no later than MAY 26. Questions can be directed to Merry Beckmann at mbeckmann@agcmn.org or call 651/796-2187. AGC of Minnesota – Technical School and Craft Training Scholarships The AGC of America Education and Research Foundation offers Workforce Development Scholarships to students enrolled in accredited

technical schools or craft training programs in any discipline of commercial construction. Students in technical or approved craft training programs will have until JUNE 1 to apply for $1,000 scholarships (renewable for up to two years). For more information, contact: Associated General Contractors of Minnesota. Phone: 651/632-8929. Denise Woods at dwoods@agcmn.org or website: http://www.agcmn.org. MN ASPHALT PAVEMENT ASSOCIATION MAPA 4th ANNUAL GOLF EVENT DATE: MONDAY, AUGUST 14, 2017 PLACE: 12800 BUNKER PRAIRIE ROAD NW COON RAPIDS, MN PWA – American Public Works Association 2017 PWX Registration is NOW OPEN! Make plans now to be in Orlando, FL August 27-30, 2017! Come experience all the public works profession has to offer in Orlando at PWX 2017. PWX draws thousands of professionals from all over the world. If you are like many of them, you have limited resources for professional development. PWX 2017 should be at the top of your list if you are looking for OUTSTANDING EDUCATION SESSIONS; a chance to meet with an extensive gathering of EXHIBITORS SHOWCASING THE LATEST PRODUCTS, SERVICES and TECHNOLOGIES; and for OPPORTUNITIES TO NETWORK WITH YOUR PEERS, HONE YOUR LEADERSHIP ABILITIES and LEARN NEW JOB SKILLS! Join nearly 6,000 of your public works colleagues from North America and beyond in Orlando for this exciting event! Register Today! Contact: American Public Works Association 1200 Main Street, Suite 1400 Kansas City, MO 64105-2100 Toll Free: 800/848-2792 Local: 816/472-6100 Fax: 816/472-1610 BACKHOE RODEO 2017 The South Carolina Chapter of the American Public Works Association (APWA) is proud to announce the 33rd Annual Backhoe competition. The branch competition will be held the week of May 15 thru 21 in conjunction with the observance of National Public Works Week. This is an excellent opportunity for your operators to show off their skills and get a little of the attention they deserve. Please encourage employees to participate. This is a fun and morale building family event. The 2017 SC APWA Rodeo is sponsored by Company Wrench Company. Upstate Branch, Spartanburg, Tuesday, May 23rd Contact: Travis Brown 864/706-9439 Peedee Branch, Conway, Wednesday, May 24th Contact: David Gilreath 843/915-5410 Lowcountry Branch, Georgetown, Thursday, May 25th Contact: Ray Funnye 843/545-3325 Midlands Branch, Columbia, Friday, May 26th Contact: Robert Sweatt 803/545-3790 APWA SUMMER CONFERENCE – State Championship Backhoe Rodeo is TUESDAY, JULY 11, 2017 Charleston Convention Center, North Charleston, SC Backhoe needs to be delivered by 2:00 PM. Rodeo to begin at 4:00 PM and the family dinner is 6:30 PM. For more information, contact: John Myers, Chairman, SC APWA Backhoe Rodeo at 843/670-0382 3rd ANNUAL PRODUCTION CHEMICALS OPTIMIZATION UNCONVENTIONAL OIL & GAS 2017 DATES: JUNE 27, 28 & 29, 2017 LOCATION: HOUSTON, TEXAS If you are spending millions of dollars a year on production chemicals, you need to make sure your program performs. Save the dates and reserve your place early for the 3rd Annual Production Chemical Optimization 2017 Congress, the number one production chemicals optimization event in North America returning to Houston, TX on June 27, 28 and 29, 2017. The 2017 conference will not only deliver brand new E&P success stories, new technologies and innovative ways of operating chemical programs to efficiently reduce lease operating expenses, but also give you the added option of attending specially designed pre-conference workshops to explore ways to implement the latest tools to market within a practical context. Sponsorship & Exhibition Opportunities Available – Following two (2) consecutive years of sold-out exhibition, this is the only one-stop shop for North American E&Ps looking for the most innovative products, services and technologies in this space. If having your company aligned with powerhouses in the industry is an important part of your strategy, this event gives you enormous opportunities to capitalize on. There is really no other event in the region that will give you the chance to meet all the active operators with the right purchasing job titles. Please contact the ABC team at sponsorship@american-business-conferences.com or CALL: 800/721-3915. BONNELL EQUIPMENT EXPO 2017 BONNELL INDUSTRIES, INC. TRUCK & ROAD EQUIPMENT CLEAR THE WAY FOR…JUNE 7 or JUNE 8, 2017 Dates: June 7 and June 8, 2017 Place: 1385 Franklin Grove Road, Dixon, IL 61021 DEMONSTRATIONS – DOOR PRIZES – FREE LUNCH – NEW & OLD EQUIPMENT - PICK ONE DAY TO ATTEND THE EXPO! EACH CUSTOMER WILL GET ONE (1) FREE LUNCH TICKET FOR ONE DAY OF THE EXPO. Quality products, people and food is what Bonnell Industries Equipment Expos are known for. Step into our manufacturing facility all while viewing our vendors’ latest advancements in products. RSVP by JUNE 1, 2017 CALL: 815/315-2617 or EMAIL: marketing@bonnell.com or contact your sales representative. IOWA LAND IMPROVEMENT CONTRACTORS ASSOCIATION (IALICA) Dedicated to Professional Conservation of Soil and Water 2017 NATIONAL SUMMER MEETING WHEN: JULY 11, 2017 to JULY 16, 2017 (all-day) WHERE: ELEGANTE HOTEL, COLORADO SPRINGS, CO (USA) For more information on the 2017 National Summer Meeting you may contact National LICA: Telephone: 630/548-1984 Fax: 630/548-9189 Email: NLICA@aol.com

Page 50 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SON INC

LINK-BELT EXCAVATORS...................................................................... 26

LAS VEGAS NV............................................................................. 49

METSO MINERAL CRUSHING...............................................................35

ALLU GROUP.......................................................................................... 13

METSO MINERALS SCREENING..........................................................41

ARTIC SNOW & ICE CONTROL............................................................ 12

NORAM.................................................................................................... 20

ATI CORPORATION................................................................................ 12

PURPLE WAVE........................................................................................45

BARGAINS...............................................................................................43

RANSOME EQUIPMENT SALES LLC/LRH........................................... 44

CEG SCALE MODELS.............................................................................. 6

RITCHIE BROS. AUCTIONEERS........................................................... 51

CLASSIFIEDS..........................................................................................43

ROAD BUILDERS MACHINERY......................................................... 7,13

CONSTRUCTION EQUIPMENT GUIDE

SCREEN MACHINE INDUSTRIES......................................................... 39

AIR COMP PROMO.......................................................................18 WANTED........................................................................................ 44

SULLIVAN PALATEK................................................................................. 9 TEREX CRANES..................................................................................... 22

DOOSAN PORTABLE POWER.............................................................. 23

ARIZONA SUPPLEMENT DRESSTA.................................................................................................15 DYNAPAC.................................................................................................. 5 EVERDIGM AMERICA.............................................................................36 EVERGREEN TRACTOR LLC................................................................ 42

DITCH WITCH OF ARIZONA.................................................................3,6 EMPIRE MACHINERY...............................................................................4 FLASKA JCB..............................................................................................5 WSM AUCTIONEERS............................................................................... 8

FELLING TRAILERS............................................................................... 31 FLANGE LOCK........................................................................................ 14 FLECO ATTACHMENTS..........................................................................13 FLUID CONTROL SERVICES.................................................................20 GRINDERCRUSHERSCREEN.COM......................................................42

TEXAS SUPPLEMENT BANE MACHINERY.................................................................................16 CONSTRUCTION EQUIPMENT GUIDE................................................ 15 DITCH WITCH WEST..............................................................................11

GROVE WORLDWIDE.............................................................................. 2

EAGER BEAVER TRAILERS.................................................................... 9

HENDRIX MACHINERY LLC.................................................................... 3

FECON....................................................................................................... 3

HENNESSY INTERNATIONAL............................................................... 14

KIRBY-SMITH/TAKEUCHI....................................................................... 12

JAMES G MURPHY CO

MCCOURT & SONS EQUIPMENT......................................................... 13

KENMORE WA...............................................................................47

ROMCO EQUIPMENT CO........................................................................ 2

KCM ........................................................................................................ 52

SIMPSON AND SONS TRADING............................................................. 3

KOBELCO................................................................................................ 19

TROPHY TRACTOR..................................................................................7

KOMATSU AMERICA CORP..............................................................16,24

VERMEER OF TEXAS-LOUISIANA......................................................... 5

KPI-JCI..................................................................................................... 37

WAUKESHA-PEARCE INDUSTRIES INC..............................................12

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2017 • Page 51

Unrreserv rvved ed public equipment auctions Fast, fleexxible financing fi avai vailable – up to 100%, 0%, $0 down do

1 of 2 – 2011 & 2008 Caterpillar D8T | Denver

1 of 4 – Caterpillarr 627G | Denver

2013 Wolffe e 8000 – Low L meter hours | Denver

3 – Unused – Grove R RT540E T540E 40 Ton Ton & 2 of 3 – Unu Unused – Grove R RT5 T530E-2 30 Ton Ton 4x4x4 | Hou Houston

2014 Caterpillar MH H3059 | Houston

Komats om u WA500-3L WA500-3L | Sacramento

2013 Caterpillar 980K | Wa Wasilla

Caterpillar 14H | Las Ve Vega gas

2 – 2012 Vo Volvo L90G | Phoenix

45,500+ items in 125+ auctions including Denver, CO Sacrament ramento, CA Norrth East, E MD Manassas, VA VA Las Veg Vegas, NV Wasilla, AK Atlanta, GA

Jun 1 Jun 6 Jun 6 Jun 8 Jun 9 Jun 10 *Jun 13

Columbus, OH Minneapolis, MN Phoenix, AZ Houston, TX Nashville, TN Kansas City, MO Saltt Lak Lake City, UT

Jun 15 Jun 16 Jun 20 Jun 21-22 Jun 22 Jun 23 Jun 27

Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Firm #2389, Auctioneer Eddie R. Graham #2237, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Motor Vehicle Dealer License #DLR25867, Auctioneer John L. Korrey # 7016005, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889 OAC. Terms & conditions apply. See rbauction.com

Bid in person or online ▸ No minimum bids or reserve prices ▸ Te Testt and inspectt on-site on▸ Open to the public, free registration

More items added daily Call about selling: 1.800.211.3983

See fu full auction & equipment listing gss at rbauction.com

Page 52 • May 28, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABILENE EQUIPMENT CENTER Abilene, TX 800/382-9271 www.anhltd.com

BANE MACHINERY INC. Dallas, TX 800/594-2263 Ft. Worth, TX 800/601-2263 Tyler, TX 800/594-2200 www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK 405/917-9191 Tulsa, OK 918/835-7200 www.oklahomaterritoryequipment.com

APCO EQUIPMENT North Las Vegas, NV 800/574-4089 www.apcoequipment.com

TRI-WEST TRACTOR, INC. Livermore, CA 925/455-8200 www.tri-westtractor.com

P Promi sees Keppt

CLM EQUIPMENT CO. INC. Lafayette, LA 337/837-6693 Lake Charles, LA 337/625-5942 Baton Rouge, LA 225/677-7838 Houston, TX 281/598-2500 www.clmequipment.com

BEARD EQUIPMENT CO. Midland, TX 432/694-4530 www.beardequipco.com

KCMA Corporation | 770.499.7000 | KCMCORP.COM 2140 Barrett Park Drive,, Suite 101 | Kennesaw, GA 30144 2