West 10 May 10, 2017 by Construction Equipment Guide

$3.00

Published Nationally ®

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Inside

Western Edition

www.constructionequipmentguide.com

May 14, 2017 • Vol. IX • No. 10 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Lumber Mill Becomes Mixed-Use Development By Chuck Harvey CEG CORRESPONDENT

Cashman Earns Legacy Award for Corporate HQ...8

Southwest Airlines Updates Terminal at LAX...17

Old Sawmill District of Missoula, Mont., is being converted into a $125 million residential, retail and commercial development that will feature four condominium buildings under the name Polleys Square, and a mixed-use building offering high-end apartments for rent called Cambium Place. Future development in the 46-acre district is expected to bring total construction costs to $250 million at build-out. Additional projects include a 55-unit student housing development called UGlobal, a 150-unit 55-plus active living and learning community and retail and office construction. A parking garage is being discussed adjacent to Ogren Park Allegiance Field. In addition, the developer is in negotiations with restaurant and brewery operators. The name, Old Sawmill District, draws on a lumber mill that once operated there. Its founder, Edgar Polleys, opened Polleys Lumber Company in 1910 and ran it through 1955 when it was sold. Two of the Polley Square condominium buildings have been completed. Crews finsee DEVELOPMENT page 44

Fossils Found During Purple Line Construction...18

Table of Contents.............4 California Section.....17-24

Old Sawmill District photo

Old Sawmill District of Missoula, Mont., is being converted into a $125 million residential, retail and commercial development. Old Sawmill District photo

The developer is in negotiations with restaurant and brewery operators.

Steve Wynn Announces $1.5B Las Vegas Project LAS VEGAS (AP) Casino mogul

and chairman. He told investors that he

reshaping a golf course behind the existing Wynn and Encore resort towers on the Las Vegas Strip into a 38-acre lagoon beside a 1,000-room hotel with a casino, restaurants and nightlife attractions. The Wynn Resorts Ltd. board approved the proposal to build on the former Desert Inn golf course in late April. Wynn is company chief executive

lake that could host daytime water skiing, paddle boarding and parasailing, and fireworks at night. Wynn bought the golf course in 2000. The project is tentatively called Wynn Paradise Park. It might open in 2020 if work starts next year. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Attachment Section..45-56 Steve Wynn wants to spend $1.5 billion envisions white sand beaches around a Paving Section.......... 61-71 Auction Section........ 74-79 Business Calendar..........77 Advertisers Index...........78

Rendering of Steve Wynn’s latest vision, Paradise Park, Las Vegas.

Page 2 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 3

"In Business for over 33 Years" 2012 John Deere 310J, Stk#: 10677, EROPS, A/C, 4WD, 3,551 hrs., 24" Quick Connect Bucket, Extendahoe, Aux. Hyd., Pilot Controls, 12x16.5 Front, Tires, 19.5Lx24 Rear Tires.......... $39,500

www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2016 Dynapac CA1500D, Stk#: 10637, EROPS,

Se Habla A/C, 66" Smooth Drum, 4 hrs., Automatic Español Vibration Control, 100hp, Luxury Comfort Cab,

14.9x24 Tires, 4 Cyl. Deutz Eng.............$86,500

2007 John Deere 450J LGP, Stk#: 10568, 2011 John Deere 700J LGP, Stk#: 10424, EROPS, A/C, FM Stereo, Sweeps, Side & Rear Screens, 6 Way Blade, 6,268 hrs., 24" Pads, 9' 8" OROPS, 6 Way Blade, 5,372 hrs., 80% U/C, 30" Wide...................................................... $46,500 Pads, 11 ft. Wide.................................. $69,500

Cat PA56 E00100E, Stk#: 9202, Winch with fair leads for D6T........................................ $16,500

2012 John Deere 310J, Stk#: 10683, OROPS, 4WD, 3,138 hrs., 24" Quick Connect Bucket, Extendahoe, Aux. Hyd., Pilot Controls, 12x16.5 Front Tires, 19.5Lx24 Front Tires.......... $36,500

OEM Tracks, Stk#: 9762, New Original Excavator Tracks: 28” Pad, 49 Links, 190MM Pitch, Cat, Komatsu, Hitachi, Volvo, Kobelco, Case, Linkbelt and Others........................ $7,500

1997 John Deere 310E, Stk#: 10727, OROPS, 2 WD, 5,693 hrs., 24" Bucket, Aux. Hyd., 2 Stick Controls, 11Lx16 Front Tires, 19.5Lx24R4 Rear Tires...................................................... $18,500

2011 JLG G9-43A, Stk#: 10687, 9,000 lbs., 43 ft., 6,247 hrs., 60" Forks, 74" Frame, Aux. Hyd., 13.00x24 Rubber Tires, 4 Cyl. Cummins Eng...... .............................................................. $36,500

1998 Massey Ferguson 383, Stk#: 10477, EROPS, A/C & Heat, 2,330 hrs., with 74" Bush Hog 2426QT Front End Loader S#12-02853, 2013 John Deere 35D, Stk#: 10651, EROPS, A/C & Heat, 810 hrs., Aux. Hyd., Push Blade...... P235 / 75Rx15 Front Tires, 18.4x30 Rear Tires, .............................................................. $32,500 4 Cyl. Perkins Eng................................. $14,500

1997 Case 580L, Stk#: 10711, OROPS, 2 WD, 5,297 hrs., 24" Bucket, 3 Stick Controls, 11Lx16.5L-F-3 Front Tires, 19.5Lx24 Rear Tires, 4 Cyl. Case Eng..................................... $17,500

2015 Big Tex Dump, Stk#: 10249, 25,900 lbs. GVWR, Net Pay Load 17,340 lbs., 48" Spread Axle, 2007 JLG 450A II, Stk#: 10635, 500 lbs., 45 ft., 2017 Dynapac CA1500D, Stk#: 10715, EROPS, 20 ft. L / 4 ft. Walls, 7' 9" W, Folding Rear Gate 2,390 hrs., 33x15.50-16.5 Tires, 3 Cyl. Deutz A/C, 11 hrs., 66" Smooth Drum,14.9x24R3 Tires, w/Heavy Duty Ramps, D Rings Inside Trailer, 4 Cyl. Deutz Eng................................... $78,500 ST235/85R16 Ries, Front Tool Box.......... $14,500 Eng.........................................................$21,500

1999 Sterling, L85, Stk#: 10521, A/C, 331,769 Miles, 11Rx24.5 Tires............................ $33,500

2016 Diamond FBS060C, Stk#: 10571, Mower, 60" Skid Steer Forestry Brush Cutter, 30-0524 Motor.................................................... $19,500

2012 John Deere 850K LT, Stk#: 10684, EROPS, 2013 Kobelco SK210LC-9, Stk#: 10698, EROPS, 1978 Dresta TD7E, Stk#: 10725, OROPS, A/C, FM Stereo, 6 Way Blade, 3,830 hrs., 23" A/C & Heat, 3,429 hrs., Aux. Hyd., 80% U/C, Sweeps, 6 Way Blade, 4,030 hrs., 17" Pads, 7" Pads, JD Ripper, Draw Bar, 24" Pads, 12' 2' Back-Up Camera.................................... $89,500 6" Wide.................................................. $16,500 Wide.................................................... $146,500

2011 Doosan G25E-5, Stk#: 10455, 4,600 lbs., 7 ft., 42" Forks, 45" Frame, 5,681 hrs., 7.00x15 Front and 6.50x10 Rear Hard Rubber Tires, Doosan DOHC, 16V Gas Eng................. $14,500

2015 Dynapac CA2500D, Stk#: HR-529, EROPS, A/C, 798 hrs., 84" Smooth Drum, Automatic Vibation Control, 550/60-22.5 Tires, Cummins Eng........................................................ $79,500

2006 JLG 400S, Stk#: 10288, 1,000 lbs., 40 ft., 2,617 hrs., 4WD, Vortec 4 Cyl. Gas Eng.$18,500

2014 Cat 246D, Stk#: 10639, EROPS, A/C, 312 hrs., 73" Bucket, Aux. Hyd., 12x16.5 Tires, 4 Cyl. Cat Eng........................................... $39,500

2014 John Deere 35D, Stk#: 10421, EROPS, A/C & Heat, 1,671 hrs., 12" Bucket, Front Blade, Aux. Hyd., 12" Rubber Tracks, Quick Coupler, 3 Cyl. YanMar Eng................................... $36,500

2005 Skytrack 6042, Stk#: 10682, 6,000 lbs., 42 ft., 4WD, 3,444 hrs., 48" Forks, 52" Frame, Aux. Hyd., 13.00x24 Foam Filled Tires, 4 Cyl. Cummins Eng....................................... $32,500

2005 JLG 800S, Stk#: 10709, 1,000 lbs., 80 ft., 1,909 hrs., 15x625 Tires, 4 Cyl. Deutz Eng......... .............................................................. $49,500

2011 Cat D6T XL, Stk#: HR-574, EROPS, A/C, Semi U Tilt Blade, 4,213 hrs., 24" Pads, 10' 7" Wide.................................................... $159,500

2008 Cat D6T LGP, Stk#: HR-538, EROPS, A/C, Sweeps, Rear Screen, St./Tilt Blade, 7,565 hrs., 2011 Komatsu D65PX-16, Stk#: HR-658, Paccar Winch S#0801742, 36" Pads, 13' 4" Wide EROPS, A/C, Heat, 3,995 hrs., Straight Blade w/ ............................................................ $129,500 Tilt, Engine Enclosures........................ $119,500

2015 Linkbelt 130LX3, HR-532, Stk#: EROPS, A/C, 1,674 hrs., 36" Digging Bucket, 24" Semi Triple Grouser Tracks, 15' 2" Boom, 8' 2" Standard Arm, Rear View Camera, 8' 6" Wide, 4 Cyl. Izuzu Eng....................................... $89,500

2014 Gyro-Trac GT35, Stk#: 10600, EROPS, A/C & Heat, 595 hrs., 28" Tracks, Gyro-Trac 700HFBBS Head (7' 7") S# E100, Rear Camera, 60% Tracks, 4 Cyl. Cummins Eng....... $129,500

2016 Kobelco SK210LC-9, Stk# HR-701, EROPS, A/C, FM Stereo, 14 hrs., 42" Bucket, 10'6" Wide, 32" Pads.......................... $146,500

2013 John Deere 850K WLT, Stk#: HR-745, EROPS, A/C & Heat, FM Stereo, 6 Way Blade, 5,764 hrs., Vall Ripper, 30" Pads, 13 ft. Wide...... ............................................................ $139,500

2008 Skytrak 10054, Stk#: 10707, 10,000 lbs., 2013 John Deere 17DX, Stk#: 10686, OROPS, 54 ft., 4WD, 3,544 hrs., 72" Forks, 62" Frame, 14x24 Tires, 4 Cyl. Cummins Eng......... $59,500 1,071 hrs., Aux. Hyd., Front Blade........ $19,500

2010 Ditch Witch RT45, Stk#: 10708, 595 hrs., 12" Trench, Slide Boom, 64" 6 Way Blade, 29x12.50-15 Tires, 3 Cyl. Deutz Eng..... $19,500

Page 4 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

WESTERN EDITION Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES 6

8 17

OFFICIALS OK $36.2M FOR BIKE, WALKING TRAIL AT LAKE TAHOE

Nevada transportation officials have approved $36.2 million to build a bike and walking trail at Lake Tahoe along a busy stretch of highway connecting Incline Village to Sand Harbor State Park.

CASHMAN EQUIPMENT EARNS LEGACY AWARD FOR CORPORATE HQ

In celebration of Earth Day, the U.S. Green Building Council Nevada (USGBC Nevada) and GREEN Alliance honored local leaders who are inspiring immense progress for Nevada, illuminating the best in green building, community engagement and service at the GREENFest Awards Gala.

WYOMING AIRPORT AWARDS $4.8M CONSTRUCTION CONTRACT

The Rock Springs-Sweetwater County Airport Joint Powers Board has awarded a construction contract for the construction of a new General Aviation Terminal & Hangar Facility to A. Pleasant Construction of Green River, Wyo. The awarded contract is valued at $4.8 million.

10 PDC WINS AGC’S BEST BUILDING AWARD FOR UNM RENOVATION

17 SOUTHWEST UPDATES TERMINAL AT LAX

46 EDGE PROVIDES ENHANCED PERFORMANCE

A $509 million construction project is under way to improve and modernize Southwest Airlines’ Terminal 1 at Los Angeles International Airport (LAX).

46 SAF-HOLLAND: SEVERE-DUTY SLIDER FIFTH

17 GAS TAX TO RAISE $52B FOR ROAD REPAIRS California drivers will see gas prices jump in November and will pay more to register their vehicles come January after Gov. Jerry Brown signed into law a tax hike of $5 billion per year to fix the state’s crumbling highways.

20 MORALES STEPS DOWN AS CEO OF HIGH-SPEED RAIL AUTHORITY After five years of service and with the California High-Speed Rail program moving rapidly from concept and planning to full-scale construction, CEO Jeff Morales announced that he will step down from his position early this summer, after the Board of Directors is expected to select a replacement.

Sterling Construction Company Inc. announced that Myers & Sons Construction is the apparent low bidder on a $21.9 million bridge project in Stockton, Calif.

10 CONSTRUCTION SPENDING HITS RECORD

30 WASHOE COUNTY SCHOOLS NAMES NBA

PROJECT IN STOCKTON

LEVELS IN MARCH

12 WYDOT TO COMMIT $250M

34 CDOT CLOSES I-70 AT FALL RIVER ROAD FOR

On May 8, CDOT began rockfall mitigation on I-70 at Fall River Road, just west of Idaho Springs. Work is scheduled to continue through June.

16 THE FUTURE OF THE COAL INDUSTRY RELIES

ATTACHMENTS SECTION

ROCKFALL MITIGATION THROUGH JUNE

ON SEVERAL FACTORS Robert Murray said President Donald Trump’s roll-back of coal industry regulations will bring back thousands of coal jobs. Edwin M. McKeon Sr. Dennis Hogeboom Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon

Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Facebook

Twitter

46 MONTABERT USA LAUNCHES NEW DRILL

MATERIAL HANDLING SOLUTIONS

50 GEITH UNVEILS NEW FEATURE, COMPLETE COUPLER LINEUP

54 JOHN DEERE ROOT RAKES WORK FOR VARIETY OF JOBSITE TASKS

54 HYUNDAI’S HYDRAULIC BREAKER SERIES INCLUDES 14 MODELS

DEPARTMENTS 72 CLASSIFIEDS 74 COMING AUCTIONS 77 BUSINESS CALENDAR

EQUIPMENT 61 WIRTGEN Small Milling Machines 66 ATLAS COPCO Generation VI Rollers

Kent Hogeboom

Dennis Hogeboom

Patrick Kiel

National Sales Manager

• Colorado• Louisiana • California • Oklahoma • Texas • New Mexico • Nevada • Arizona • Utah

• Idaho • Montana • Oregon • Washington • Wyoming

315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

www.constructionequipmentguide.com

50 VACUWORX PROVIDES MID-RANGE

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910

Mobile

STONE CRUSHER

COMMUNITY PARTNERSHIP AWARD WINNER

Construction spending is at record levels for the second straight month in March and is up 4.9 percent for the first three months of year compared to the same period in 2016, despite dipping slightly compared to February, according to an analysis by the Associated General Contractors of America.

Web site

48 SEPPI UNVEILS NEW VERSION OF FOREST,

23 STERLING AWARDED $22 MILLION BRIDGE

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.

WHEEL SYSTEM

YouTube

602/679-8759 e-mail dennishogeboom@cegltd.com

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 5

> ÊÕ

> ÕÃ ÃÊÌ `>Þ `> >Þ ÞttÊ ÀÀÞ Þ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

www ww w.R .RBused.com

Celeb brating tiing g our 30th Yea Year!!

2000 KOMATSU PC30MR-1, #5969, CAB/HEAT | BLADE | ROADLINERS | AUX HYD'S | 1,200 HRS ................................................................ $29,500

2008 KOMATSU PC78MR-6, #81717, CAB/AC | ROADLINERS | 8' ARM | HYD THUMB | 2,700 HRS..........................................................$79,500

2014 KOMATSU PC88MR-10, #92381, CAB/AC | 11'2" BOOM | 7' ARM | 18" SHOES | AUX HYD'S | QC| 2,100 HRS........................................ $89,500

2004 KOMATSU PC200 LC-7, #81536, CAB/AC | 31.5" SHOES | 9'7" ARM | HYD THUMB | 5,600 HRS........................................................$126,500

2006 KOMATSU PC220 LC-7, #92023, CAB/AC | 31.5" TRACKS | MECH THUMB | 6,300 HRS........ ................................................................ $79,500

2011 KOMATSU PC308US LC-3E0, #82416, CAB/AC | QC | 33.5" TRACKS | AUX HYD'S KOMTRAX | 4,400 HRS............ CALL FOR PRICE

2012 KOMATSU PC360 LC-10, #82876, CAB/AC | 33.5" TRACKS | 10' ARM | JRB QC | 5,000 HRS .................................................. CALL FOR PRICE

Page 6 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Lufkin 936-632-6775

Nederland 409-722-7368

Bryan 979-775-7368

Channelview 281-452-7368

www.mustangcat.com

Houston, Bingle 713-838-7368

Freeport 979-233-7368

Houston, SW 713-838-7368

Conroe 936-788-7368

Nevada Transportation... 1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Officials OK $36.2M for Bike, Walking Trail at Lake Tahoe CARSON CITY (AP) Nevada transportation officials have approved $36.2 million to build a bike and walking trail at Lake Tahoe along a busy stretch of highway connecting Incline Village to Sand Harbor State Park. Project manager Nick Johnson told the state transportation board the 3-mi.-long shared use path will improve safety along state Route 28 where a number of accidents occur each year. A pedestrian tunnel will pass beneath the highway near Hidden Beach just north of the popular state park. Parking will be banned along the highway, but pullouts are being created for public buses to drop off beach-goers. The Nevada Appeal reports the work began last year with initial construction of

Parking will be banned along the highway, but pullouts are being created for public buses to drop off beach-goers.

the parking lot and installation of sediment control. Johnson said his goal is to complete the project by the end of next year. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 7

COME OUT AND

PLAY! ICUEE 2017 | Louisville, Kentucky | October 3-5 There’s only one place you can play with all the new toys in the construction and utility industry before you buy them — ICUEE, North America’s Premier Utility Demo Expo. Come get your hands dirty on our 2-mile outdoor test track. Or while exploring 25 acres of exhibits. And learn about the newest technology at our indoor demo stage. Every other year we gather over 950 of the leading manufacturers. So you can come play in our sandbox.

Page 8 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LEED Gold...

Cashman Equipment Earns Legacy Award for Corporate HQ In celebration of Earth Day, the U.S. Green Building Council Nevada (USGBC Nevada) and GREEN Alliance honored local leaders who are inspiring immense progress for Nevada, illuminating the best in green building, community engagement and service at the GREENFest Awards Gala. In a recent award ceremony, Cashman Equipment received the Community Green Building Legacy Award for its Leadership in Energy and Environmental Design (LEED) Gold corporate headquarters in Henderson, Nev. The Community Green Building Legacy Award is for any building constructed, renovated, or operated within the past 10 years that was innovative in sustainable practices and pushed the envelope of sustainability in design and development. Cashman Equipment achieved LEED Gold certification in 2009 through a whole-building

approach to sustainability in all nine buildings of its corporate headquarters, designed by Las Vegas-based SH Architecture. Due to this approach, the company saw a 32 percent overall reduction in energy use, a 43 percent reduction in water use, and 97 percent of construction waste diverted from landfills. “We are honored to accept this award on behalf of Cashman,” said Kate Gallagher, marketing communicator and facility tour guide of the company. “The other honorees’ dedication to sustainability is staggering, and we’re proud to be counted amongst them.” Winners of the 2017 GREENFest Awards are project teams, buildings, companies, organizations and individuals who have demonstrated leadership for a greener Nevada and represent the best and brightest of Nevada’s green building and sustainability movement.

(L-R) are Curt Carlson, principal director of SH Architecture; Kate Gallagher, marketing communicator of Cashman Equipment; David R. Griffin, general manager of equipment solutions of Cashman Equipment; and Daniel McGinnis, senior design associate of SH Architecture.

Additional recipients included Ciara Byrne and Kim MacQuarrie, co-founders of Green Our Planet for GREENFest's Rob Dorinson Environmental Hero Award; the Las Vegas Academy for the Arts for Community Leader in Green Schools, Vinny Spotleson for Community Volunteer Leadership;

and the Zion Community Garden, Conservation District of Southern Nevada, for the Transformers Award. The GREENFest award ceremony at The Orleans in Las Vegas concluded with Pat Mulroy receiving the USGBC Nevada’s Lifetime Achievement Award for her exten-

sive water conservation work throughout her life, including her time as the general manager of the Southern Nevada Water Authority from 1993 until retiring in February 2014 and as the general manager of the Las Vegas Valley Water District from 1989 until her retirement. Currently, there are more than 545 LEED commercial projects in Nevada, totaling more than 325 million sq. ft. across myriad building types and business sectors. Home to 1,281 LEED Professionals and 77 USGBC members, Nevada’s LEED construction will contribute 96,000 jobs, $5.73 billion in labor earnings and $8.55 billion to the GDP between 2015 and 2018. For more information, visit cashmanequipment.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Wyoming Airport Awards $4.8M Construction Contract The Rock Springs-Sweetwater County Airport Joint Powers Board has awarded a construction contract for the construction of a new General Aviation Terminal & Hangar Facility to A. Pleasant Construction of Green River, Wyo. The awarded contract is valued at $4.8 million. The new General Aviation Terminal & Hangar Facility will replace a decades old facility that dates to the 1920s. The existing facility no longer meets the needs of the travelling public and serves as a barrier to economic development in southwest Wyoming. General Aviation accounts for nearly 87 percent of the airport’s operating revenue and has been a focus of the airport board and staff for the last two years as it works towards operational self-sustainability. The total project cost including this contract, design, engineering, project management/inspection, and building permits is expected to be $5.4 million. “With the gracious help of the Wyoming Business Council, Federal Aviation Administration and Wyoming Department of Transportation Aeronautics Division, this project is 100 percent grant funded requiring no local match,” said Devon Brubaker, airport manager. “The airport serves as one of two gateways into our community for

Rock Springs-Sweetwater County Airport rendering

tourism and business. The existing facilities stopped serving the needs of our community decades ago and are severely overdue for replacement.” Demolition of the existing facility is expected to commence immediately with construction of the new facility immediately following. The new hangar will be opera-

tional by December 2017 with the terminal coming online in April 2018. Additional projects associated with this new facility include the construction of a 30 kW solar array that will offset an estimated 50 percent of the new facility’s electrical demand. This solar array is made possible through Rocky Mountain Power’s Blue Sky

Program and its partners. A public ground-breaking will be scheduled in the coming weeks to help the airport celebrate the start of this monumental project. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 9

CASE AUTHORIZED DEALERS Alaska

Oklahoma

YUKON EQUIPMENT Anchorage (907) 277-1541 Fairbanks (907) 457-1541

OCT EQUIPMENT Clinton (580) 323-3422 Oklahoma City (405) 789-6812 Tulsa (918) 437-5085

Arizona BINGHAM EQUIPMENT Casa Grande (520) 836-8700 Parker (928) 669-9271 Yuma (928) 726-4701

EENY.

MINI.

MIGHTY.

WHOA!

TITAN MACHINERY Phoenix (602) 269-3221 Tucson (520) 623-5848

California DIAMOND A EQUIPMENT Oxnard (805) 485-2103 Santa Maria (805) 621-7830 SEQUOIA EQUIPMENT COMPANY Bakersfield (661) 679-1470 Fresno (559) 441-1122 SONSRAY MACHINERY El Cajon (619) 873-0123 Fontana (909) 355-1075 Redding (530) 245-9000 Sacramento (916) 649-0096 San Leandro (510) 562-0653 Santa Fe Springs (562) 903-7377 Stockton (209) 464-9600

Colorado CENTURY EQUIPMENT Clifton (970) 434-7363 Durango (970) 247-0522 TITAN MACHINERY Colorado Springs (719) 596-2924 Henderson (303) 286-7000 Windsor (970) 461-4960

Idaho BURKS TRACTOR Caldwell (208) 466-7875 Twin Falls (208) 733-5543 PIONEER EQUIPMENT American Falls (208) 226-5209 Blackfoot (208) 785-0008 Idaho Falls (208) 523-5455 Rexburg (208) 359-8000

Montana TITAN MACHINERY Billings (406) 259-5500 Great Falls (406) 453-1405 Missoula (406) 543-7782

Nevada

THE ALL-NEW C SERIES MINI EXCAVATORS

SONSRAY MACHINERY N Las Vegas (702) 649-5012 Sparks (775) 358-5000

New Mexico TITAN MACHINERY Albuquerque (505) 342-2566

A full line engineered to provide maximum power, greater versatility and lasting durability. With six models from 1.7 to 6.0 metric tons, there’s nothing mini about what these machines can do. Pick the one for you at CaseCE.com/MiniEx

©2017 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.

Oregon CENTRAL MACHINERY Hermiston (541) 567-2331 SONSRAY MACHINERY Portland (503) 283-2461 Salem (503) 362-1371

Texas ASCO Abilene (325) 698-2726 Amarillo (806) 372-8386 Beaumont (409) 212-8100 Belton (254) 613-1500 Brenham (979) 836-6641 Bryan (979) 779-8942 Euless (817) 283-2844 Houston (North) (281) 987-1990 Houston (South) (713) 649-0940 Lubbock (806) 745-2000 Manor (512) 272-8922 San Angelo (325) 655-5666 San Antonio (210) 333-8000 Sherman (903) 893-7586 Terrell (972) 563-2171 Tyler (903) 593-0201 Wichita Falls (940) 687-2726 NUECES POWER Corpus Christi (361) 289-0066 Laredo (956) 725-0066 San Benito (956) 361-0066 Victoria (361) 576-0066 Vinton (915) 541-0066 PERMIAN TRACTOR Odessa (432) 367-8628

Utah CENTURY EQUIPMENT Cedar City (435) 586-4406 Logan (435) 752-1533 Salt Lake City (801) 262-5761 Springville (801) 794-1463

Washington CENTRAL MACHINERY Moses Lake (509) 765-1257 Pasco (509) 547-9003 Sunnyside (509) 837-3833 SONSRAY MACHINERY Auburn (253) 735-2702 Marysville (360) 651-2171

Wyoming CENTURY EQUIPMENT Rock Springs (307) 382-6570 TITAN MACHINERY Gillette (307) 682-9742

Page 10 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Second Straight Month...

Construction Spending Hits Record Levels in March Construction spending is at record levels January through March 2017, compared tial segment in March was power construcfor the second straight month in March and with the same months of 2016, shows tion (including oil and gas pipelines), which is up 4.9 percent for the first three months of demand for construction continues to expe- fell by 0.6 percent for the month but is up 8.2 year compared to the same period in percent year-to-date. The next2016, despite dipping slightly comlargest segment, manufacturing, pared to February, according to an expanded by 0.5 percent for the analysis by the Associated General “If Washington officials can find month but is down 9.8 percent yearContractors of America. Association to-date. Commercial (retail, wareofficials said many firms are eager to a way to enact significant new house and farm) construction see details of the President's pending dropped by 3.2 percent in March but infrastructure plan, which should infrastructure funding, we are climbed 12.7 percent year-to-date. boost construction demand. Private office construction decreased “Construction spending totals dur- likely to see even higher record by 2.6 percent for the month but ing the past two months are at the levels of construction spending grew by 17.7 percent year-to-date. highest levels we have ever seen,” Private residential construction said Stephen E. Sandherr, the associ- for the forseeable future.” spending edged up by 1.2 percent ation’s chief executive officer. “If the between February and March 2017, winter weather hadn't been so mild in and was up 7.5 percent year-to-date. much of the country, we would have Stephen E. Sandherr Spending on multifamily residential seen less growth in February and a construction increased by 2.0 percent Associated General Contractors of America higher rate of growth in March, but for the month and is up 7.4 percent overall demand remains quite year-to-date, while single-family robust.” spending inched up 0.3 percent from Construction spending in March totaled rience robust growth. February to March and is up 4.7 percent $1.218 trillion at a seasonally adjusted annuThe construction official noted that pri- year-to-date. al rate, essentially unchanged from the vate nonresidential spending declined by 1.3 Public construction spending declined 0.9 month before, Sandherr said. He added that percent for the month and is up 6.4 percent percent from a month before and is now the year-to-date increase of 4.9 percent for year-to-date. The largest private nonresiden- down by 6.5 percent for the first three

months of 2017. The biggest public segment — highway and street construction — increased by 0.5 percent for the month but is down 2.4 percent year-to-date. The other major public category — educational construction — fell by 2.0 percent in March and by 2.6 percent for the combined JanuaryMarch period. Association officials said that the decline in public construction spending highlights the need for new infrastructure proposals like the one being developed by the Trump administration. They added that many firms are eager for the administration to release details about the new plan. And they said significant new investments in infrastructure will help boost overall economic activity and support greater demand for construction services. “If Washington officials can find a way to enact significant new infrastructure funding, we are likely to see even higher record levels of construction spending for the foreseeable future,” said Sandherr. For more information, visit www.agc.org.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

PDC Wins AGC’s Best Building Award for UNM Renovation By Rachel Stone UNM NEWSROOM

The Association of General Contractors (AGC) of New Mexico announced that The University of New Mexico’s Chemistry building renovation, completed last year, was deserving of the best “Construction Management-at-Risk” award for 2017. This $16.5 million project included major HVAC (heating, ventilation, and air conditioning) and electrical infrastructure upgrades, with renovated laboratories, common gathering areas and office spaces. “This is the 27th year we’ve recognized and awarded member submitted projects based upon the complexity and challenges of the construction process. The Best Buildings Awards celebration honors the best in commercial construction and is attended by the industry’s top construction professionals, public and private owners, dignitaries and business communi-

UNM Newsroom photo

UNM Chemistry building renovation award winners.

ty leaders,” said Patrick Thomas, the current AGC president. Renovating an occupied building proves challenging because normal, everyday activities must

continue such as research and teaching. Michael Reid, group manager with Planning, Design & Construction (PDC), is wellversed in executing these large

projects on the campus where safety and efficiency are the top priority. He explained that collaboration is key with the building occupants during all phases of the project

from beginning to end. “This project was very complex, and we had a strong, positive relationship with the construction company and the building occupants. We were all successful because of the total commitment from everyone involved in this project,” Reid said. Because of this investment, UNM students and faculty can now collaborate in modern labs that are both energy efficient and comfortable. A ventilation system was installed to greatly improve the air quality and efficiency in the lab spaces, and LED lighting can now be found throughout the building. Flexible gathering spaces were designed to promote collaboration between students, staff and faculty — a trend that can be found in all of PDC’s new construction and renovation work on campus. For more information, visit news.unm.edu. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 11

ARIZONA Bejac Corporation p www.bejac.com b j PHOENIX (800) 77-BEJAC CALIFORNIA Bejac Corporation p www.bejac.com b j PLACENTIA (800) 77-BEJAC SACRAMENTO ((800)) 77-BEJAC REDDING (800) 77-BEJAC

SAN FRANCISCO (800) 77-BEJAC FRESNO (800) 77-BEJAC SAN DIEGO (800) 77-BEJAC

COLORADO Power Screening, g, LLC www.powerscreening.com i HENDERSON (800) 231-5005 NEV VAD ADA Liebherr Mining Equipment www.liebherr.us li bh ELKO (775) 738-7386 Bejac Corporation p www.bejac.com b j RENO (800) 77-BEJAC NEW MEXICO Nueces Power Equipment www.nuecespower.com (888) 398-9806 Power Screening, g, LLC www.powerscreening.com i ALBUQUERQUE (505) 345-4467 OREGON Orion Equipment q p www.orion-equip.com i i VANCOUVER VANCOUVER (800) 280-8124 TEXAS Nueces Power Equipment www.nuecespower.com CORPUS CHRISTI EDINBURG (888) 810-5134 (361) 289-0066 VICTORIA EL PASO (361) 433-0672 (888) 645-5479 LAREDO SAN ANTONIO (888) 409-5662 (210) 807-8216 HOUSTON SAN BENITO (713) 481-4718 (888) 810-5134 810 5134 BANE Machinery y Inc. www.banemachinery.com/ b hi DALLAS TYLER (214) 352- 2468 (903) 597-6641 FT WORTH (817) 847-5894 UT TAH AH Power Equipment q p Company www.power-equip.com i WEST JORDAN (801) 280-4105 WASHINGTON Oi Orion Eq ip Equipment t www.orion-equip.com i i SEATTLE & VANCOUVER VANCOUVER (800) 280-8124 WYOMING Power Equipment q p Company www.power-equip.com i CASPER (800) 883-9275

Page 12 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WYDOT to Commit $250M

$219,500 EACH (3) CAT 773Es, High Idle Time, Extensive History, VERY GOOD COND

$418,000 EACH (2) 2015 VOLVO A40Gs, only 865 hrs working time, 900 hrs idle time, warranty, like new condition!

$189,500 EACH (2) 2011 CAT 740Bs, High Idle Time, Extensive History, VERY GOOD COND

$349,900 EACH (4) UNUSED 2016 CAT 336FLs, full spec!

$255,000 EACH (2) UNUSED 2016 CAT 950Ms, well spec’d units.

$365,000 $385,000 EACH (2) 2016 CAT 730C2s, big rubber, tailgates, like new, 600 hrs!

$335,000 2015 VOLVO A30G, only 208 hrs working time! Big rubber, warranty, 1,394 idle hrs, like new cond.

$138,000 EACH (2) CAT 725s, 5,137/4,377 working hrs, 5,464/5,572 hrs idle time, very nice trucks.

$182,500 EACH (2) UNUSED CAT 314ELCRs, full specs

$158,500 2013 CAT 321DLCR, HYD Q/C BKT, AUD HYD, HYD THUMB, EXC COND, 2315 HRS

Work continues on North Sheridan Interchange. Construction crews will soon start working on several projects throughout the state, which will improve the condition of the state’s roadways and bridges and enhance safety and traffic flow. Motorists will see crews working on pavement repairs and resurfacing, bridge rehabilitation, rockfall mitigation and other projects on Wyoming’s highways. The Transportation Commission is expected to award about $259 million in contracts by September. Construction crews will be working on more than 120 WYDOT projects. “In Wyoming, our highway construction season is very short, and motorists will encounter many construction sites as they travel throughout our state,” said Gregg Fredrick, WYDOT chief engineer. “It is important to slow down, be alert, expect the unexpected and drive safely through these work zones.” In the northeastern part of the state, WYDOT will continue work on the $46.4 million North Sheridan Interchange project, which includes constructing a new interchange on Interstate 90, realignment and work on several streets in Sheridan. The Wyoming Transportation Commission awarded the contract in June 2016. Crews completed phase one in 2016, which included grading and dirt work for the new interchange and Decker Road. During phase two this year, crews will continue the interchange construction and construct new alignments on North Main Street, Yellowtail Drive, Industrial Road and Decker Road in Sheridan. On another section of I-90, crews will work on a 6-mi. pavement project between Buffalo and Gillette that also includes bridge deck repairs. The project is expected to be awarded in April. On the western side of the state, crews will work on a $14.7 million 10-mi. overlay project on the east and west bound lanes of Interstate 80 between Lyman and Granger Junction, where they will remove the top portion of the road and replace it with new material. Crews also will work on a $7 million 12-mi. overlay project on I-80 westbound between Rock Springs and Rawlins, which includes work on four bridges. On the eastern side of the state, crews will work on a $9.2 million 7-mi. paving and rehabilitation project on I-80 near Otto Road, west of Cheyenne. Crews also will make minor repairs to eight bridges in that area. On another section of I-80, crews will start work on an $8 million reconstruction project of three bridges near Pine Bluffs, which also will include a pavement overlay. WYDOT is replacing the bridges because of their age and condition. On I-25, construction will take place on 4 mi. west of Douglas that will repair cracked pavement and widen the shoulders. The

project is expected to be awarded in July. Non-interstate projects WYDOT recently started the $23.5 million Harney Street viaduct and road project in Laramie. The work includes replacing the 53-year-old Clark Street viaduct, which has physical deterioration, connecting traffic from Snowy Range Road (WYO 230) to downtown Laramie and widening the Laramie River Bridge to four lanes. Vehicle, pedestrian and bicycle traffic will be accommodated as part of this reconstruction project. The project is expected to be completed by July 31, 2019. In the northwestern part of the state, crews will overlay 11 mi. of WYO 120 between Meeteetse and Cody. The $3.6 million project will be paid for with 10-cent fuel revenue. Crews also will start rockfall mitigation work on U.S. 14-16-20 between Yellowstone and Cody, which includes removing loose rock and installing rock bolts, mesh and attenuators. On WYO 296, the Chief Joseph Highway, crews will replace old rockfall mesh with new mesh. On the eastern side of the state, crews will work on a $3.4 million overlay project on 12 mi. of WYO 94 near Douglas. In the north central part of the state, crews will smooth the pavement surface on 9 mi. of road on U.S. 16 between Ten Sleep and Buffalo. The $3.3 million project will be paid for with 10cent fuel tax revenue. WYDOT also will repair the intersection of WYO 22 and U.S. 26-89-189-191-287 in Jackson (The Y Intersection) to remove rutting, and relieve traffic congestion. Paving fiber strands will be incorporated into the new pavement for additional strength and rut resistance. The work also will include modifying the intersection to add a left turn off U.S. 26-89-191 onto WYO 22, removing the separate free right turns on and off WYO 22 and limiting movement into the intersection from Buffalo Way to a right turn only. The commission also will award contracts for several other projects on non-interstate roads this summer. Several of the projects will use cost-effective repair methods by recycling the existing surface. On WYO 136 east of Riverton, crews will repair 12 mi. of road by removing 3 in. of pavement, mixing it with oil and resurfacing the road with the same material. In Rock Springs on 1-mi. sections of Elk Street (U.S. 191) and Dewar Drive (I-80/U.S. 30 Business), crews also will remove the top section of road, mix it with an oil and resurface the road. Crews will complete a similar process on 8 mi. of WYO 91 between Torrington and Huntley, but they will use a cement slurry instead of an oil. *Reprinted from Wyoming RoadWork Guide, April 2017 (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 13

WITHH THEE RIGHT TOOLS TO INVEST STT,, YOU CANN PUT THEE RIGHT TOOLS TO WORK. Volv olvo Financial Services offers 0% for 24-months on select Volv Volvo D-Series excaavvators and G-Series wheel loaders. Low-interest rates and high-quality equipment create the perfect combination for your business. Contact your local V Volv olvo dealer today to get the right tools for you. Final approved transaction terms are subject to standard VFS credit underwriting guidelines and advance policy. VFS reserves the right to amend or cancel the program at any time without notice. Approvals will state the program terms and any other conditions deemed appropriate by VFS.

Page 14 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 40H Excavator w/green bucket, 1:50 Scale - $235

Tadano ATF 160G-5 All Terrain Crane, 1:50 Scale - $215

Caterpillar D400 Articulated Dump Truck, 1:50 Scale - $175

Volvo G690C Motor Grader, 1:50 Scale - $150

JCB 535-140 HiViz Telehandler, 1:50 Scale - $145

Terex TLB890 Backhoe/Loader, 1:50 Scale - $140

Allis Chalmers HD-21 Orange Dozer, 1:50 Scale - $130

Volvo L35G Wheel Loader, 1:50 Scale - $120

Liebherr LR632 Crawler Loader, 1:50 Scale - $120

Case 850C Angle/Tilt Dozer, 1:35 Scale - $100

Case 850B Angle/Tilt Dozer, 1:35 Scale - $100

Komatsu WA600 Wheel Loader, 1:50 Scale - $110

Mack Red,White & Blue Mixer Truck, 1:34 Scale - $100

Mack Red,White & Blue Dump Truck, 1:34 Scale - $100

Caterpillar 225 Crawler Crane w/Clamshell Bucket, 1:50 Scale - $75

Bobcat/Melroe 50th Anniversary Gold Skid Steer Loader, 1:25 Scale - $30

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 15

Supporting Professionals...

FleetPros, NJPA Partner to Provide Industry Support

THE

END IS NEAR

Scott Carr (L), NJPA contract administrator, and Wayne Corum, chairman of Fleet Pros’ National Board.

In an effort to continue to provide the best possible service to its members in the fleet industry, National Joint Powers Alliance has signed on as an official partner of FleetPros, a nonprofit association that supports fleet management professionals. “We see FleetPros as an organization that mirrors our commitment to service, innovation, and continuous improvement,” said Scott Carr, NJPA contract administrator. “With its national tradeshow, Fleetcon, quarterly chapter meetings, and educational programs, it is very effective in providing valuable tools to current and next-generation fleet professionals.” FleetPros supports industry professionals through education, professional development, and networking. It promotes open exchanges of information on experiences, ideas, and methods, and keeps its members updated on legislation and environmental matters. The association has been in operation since 1976 and currently has five chapters (Arizona, Colorado, Nevada, Texas, and Utah). “The FleetPros Board of Directors is very pleased to have a partner such as NJPA,” said Wayne Corum, chairman of the board. “Its commitment and service to the fleet industry is a natural fit for our association. We look forward to working with Scott Carr and NJPA in serving and growing our membership." With the partnership, Carr will serve on the associate committee of FleetPros’ National Board. NJPA will also provide support for the association’s training and mentorship programs, guest speaker grants, membership fee grants, and Fleetcon’s education sessions and awards ceremony. For more information, visit njpa.co/FleetPros. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Time is running out. Don’t miss this opportunity to grab a Tier 3 Flex portable air compressor before they’re gone. Tier 3 units are still available from 750 to 1800 cfm, pressures up to 500 psi. In order to secure your Tier 3 Flex machine, orders must be placed prior to September 1st. Order now before it’s too late... All Tier 3 machines must be completed prior to December 31, 2017 LEARN MORE AT:

www.Sullivan-Palatek.com

(219) 874.2497

Page 16 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Future of the Coal Industry Relies on Several Factors By Giles Lambertson CEG CORRESPONDENT

Robert Murray said President Donald Trump’s roll-back of coal industry regulations will bring back thousands of coal jobs. While he could be right, his view is not exactly unbiased. Murray is CEO of Murray Energy, which is billed as the largest coal mining company in the United States, employing 6,000 people and mining 65 million tons of the energy commodity each year. Yes, with fewer regulations, coal might regain its footing as a viable domestic energy source and a reliable employer of tens of thousands of people. It might do so with minimal damage to America’s air and water resources. But the situation is not as simple as that. The coal industry is unlikely to reclaim its ascendant role in energy production nor recover all the jobs lost in recent years. Several determining factors will tell how much bounce actually occurs. Regulations and Rules — Some History The real argument about regulating coal production is about the role of regulations. Strict regulation of American coal mining is argued as necessary for the safety of coalminers and of the environment. There is little dispute about that. However, opponents of the industry’s regulations argue that some rules are not protective — they are, in fact, punitive and designed to destroy the industry. Rules and regulations imposed since the recession have been both. A prime example is the Interior Department Stream Protection Rule announced just last December, a month before the Obama administration turned over its rule-making authority. The rules required coal companies to “avoid mining practices that permanently pollute streams, destroy drinking water sources, increase flood risk and threaten forests.” Companies were told to monitor any stream that could be affected by a mine “before, during and after operations.” The administration called it a “modern and balanced approach” to protecting streams. West Virginia Democratic Sen. Joe

The coal industry is unlikely to reclaim its ascendant role in energy production nor recover all the jobs lost in recent years. Several determining factors will tell how much bounce actually occurs. Manchin III begged to differ. He called the 1,648-page rule “very alarming in its scope,” and said the methodology of the rule-making was “flawed and lacked transparency.” Manchin has coal-mining constituents, of course, but he was not the only critic of the regulation: This year, the House and Senate employed the Congressional Review Act for only the second time in history to rescind the rule. The stream protection regulation was part of what came to be called President Obama’s “war on coal.” The term was first used in 2009 and, by 2012, had become part of the presidential election campaign: Days before the 2012 vote, the Republican House passed a Stop The War On Coal Act, with the help of 19 Democrats. The Democratic-controlled Senate ignored it. It is interesting that President Obama entered the White House popularly seen as a friend of the coal industry. “This is America,” he said at a 2008 election rally in Virginia. “We figured out how to put a man on the moon in 10 years. You can’t tell me we can’t figure out how to burn coal that we mine right here in the United States of America and make it work.” Ultimately, his administration apparently concluded that not burning the stuff was the best option of all. Cap-and-trade auctions were announced in 2009 — the process by which limits on coal-burning smokestack emissions are imposed, bartered among industries, and systematically tightened. Then the EPA made its Clean Water Act more stringent for areas near mines. Not far behind these regulations were a cross-state air pollution rule banning pollution of areas downwind from a plant and

reduced limits on mercury and carbon dioxide emissions. It is noteworthy that not all of these ideas originated in the Obama administration. The administration’s clean air interstate rule was another iteration of a regulation authored by the George W. Bush administration and shot down by courts, which ordered a new one. The Bush rule, in turn, was a successor to one enacted during the presidency of Bill Clinton. Similar genealogy of rulemaking is evident for other Obama-era rules, most of them originating in clean air and EPA thresholds established in the 1970s. Ideology and Coal The difference was that Barack Obama was ideologically receptive to imposing stricter limits on coal mining operations and did so with few evident qualms about the impact of the rules on local economies. The Trump administration is less ideologically pure. The new president seems to prefer a more pragmatic — and populist — response to coal mining, aiming to incorporate it into the country’s energy future rather than to eliminate it. This mindset naturally is heartening to the coal industry — and to industries that serve it, including heavy machinery manufacturers. Caterpillar, which is reputed to be the largest manufacturer of mining machinery in the world, has struggled in recent years because of a slowdown in mining investments worldwide. But its stock jumped two percent recently on the strength of its management’s focus on getting a better return on its investments and its “exposure to under-invested machinery markets in the early stages of recovery.” For similar reasons, Komatsu America just completed acquisi-

tion of Joy Global, the maker of P&H and Joy products for surface and underground mining. The mining equipment market clearly is strengthening around the world. Yet the only reason the new administration can boldly roll back executive orders and agency edicts — notably few anti-carbon standards in recent years have been legislated — without thunderous political disapproval from Main Street America is because latest generation rules seem to have nebulous effects on the environment. They are sweeping and costly, yet produce negligible environmental results. A center-right non-profit called American Action Forum toted up the cost of the Obama administration’s Clean Power Plan that pressures states to shut down coal plants: $1 trillion in lost productivity, 125,000 lost jobs, and dramatic increases in the cost of electricity. Meanwhile much of the rest of the world — including, of course, China — would push ahead economically, more than offsetting cleaner air produced by straitened industries in the United States. Here’s corollary evidence from another segment of the energy industry: An SMU professor testified to Congress last year that methane emissions from domestic oil and gas have dropped 15 percent over the last 25 years, though production has skyrocketed. In other words, the industry is becoming dramatically more efficient. Nonetheless, the EPA asked for more stringent rules. Then there is climate change. Alarmists say computer-generated data prove the ocean is rising due to man-made pollution, while less alarmed observers point to scientific measurements that largely dispute an envisioned catastrophe. To non-ideological policymakers and business leaders — including coal mining executives — the sound and fury of the strident debate is not helpful. Natural Gas — the Rival Fossil Fuel At least as threatening to coal mines as government regulations is natural gas. It is the coal’s rival for generation of industrial power. Its dramatic increase in availability comes from mushrooming frack-

ing activity around the country over the last decade. The underground cracking open of oil deposits and horizontal drilling techniques that reduce the surface footprint of wells have created new pools of recoverable oil and gas, which have only begun to be tapped. That industry leaders have proven to be fast learners of best practices and cost-effective procedures ensures production will continue for many years to come. This is the chief reason the share of electricity produced by coal has fallen over the decade from 50 percent to 33 percent. PeaBody Energy declared bankruptcy last year. So did four other U.S. coal companies. The burdensome regulatory regime certainly is one reason for the business failures; fracking is the other. Renewable energy sources like solar also are a factor, but a relatively minor one. So even if the regulatory outlook for coal mines is suddenly brighter, abundant supplies of natural gas still will compete with coal for market share. While fracking operations have environmental threats hanging over them, too, especially in respect to ground water, the problems seem more easily remedied. Coal companies surely cannot count on environmentalists shutting down fracking. The wild card in all this is technology. In 2015, a power plant in Canada announced it was capturing 90 percent of the carbon that otherwise would have exited its smokestacks during burning of coal and repurposing it as fuel. Hundreds of thousands of metric tons of carbon dioxide were being captured. The Boundary Dam power plant is powered by brown coal, however, not the more energy-rich black bituminous coal that U.S. producers mine. Even so, the technology may be adaptable to coal burned in this country. On another front, a coal company called Ramaco Carbon is opening a new mine in Wyoming, which is either an act of faith in the future or a foolish move. What makes the opening interesting is that Ramaco also is building a research center to develop new and better products for mined coal. “We’re trying to come up with, frankly, a different idea that will see COAL page 60

Crescent City

395 139

101 299 89

Burney Eureka 299 Rio Dell

CALIFORNIA STATE SECTION

395

299 44

44 36

101

Leggett

395

Chico

Oroville

Fort Bragg Point Arena 20 1

80 Tahoe City Auburn 50 South Lake Sacramento Tahoe

101

70 5

Santa Rosa

505 80

395 49

680

San Francisco

Sonora

Berkley 580 Oakland 280

120 120

120

Modesto

880

San Jose

140

101 1

395 152

Madera

Santa Cruz Montery

Fresno

180

190

198

Death Valley Junction

King City

Lucia

198

101 127 46

178 15

San Luis 33 Obispo Santa Maria

Bakersfield

Baker

395

Barstow

101

Santa Barbara

Ventura

Glendale San Bernadino Los Angeles Riverside Santa Monica Santa Ana 10 Palm Springs Long Beach 1

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”

101

Oceanside

Your California Connection – Dennis Hogeboom – 1-877-7CEGLTD – dennishogeboom@cegltd.com

San Diego 8

Southwest Updates Terminal at LAX By Chuck Harvey CEG CORRESPONDENT

A $509 million construction project is under way to improve and modernize Southwest Airlines’ Terminal 1 at Los Angeles International Airport (LAX). The airline is undertaking a renovation program for Terminal 1 to improve the terminal interior, the outdoor aircraft parking ramp area and the traffic flow around the Central Terminal Area. Southwest Airlines will provide the upfront funding of the project, but will be reimbursed by Los Angeles World Airports (LAWA) as components of the project are completed. Terminal 1 opened in 1984 and is in need of modernization to accommodate the needs of a technology-rich, post-911 world. More than 8.6 million passengers used the terminal in 2015, the latest year for Terminal 1 passenger statistics. Because building systems are nearing the end of their useful life in the space, construction crews will replace them with more efficient, environmentally-friendly equipment. The upgrades include: a new consolidated security screening checkpoint, a fully automat-

AvAirPros photo

A $509 million construction project is under way to improve and modernize Southwest Airlines’ Terminal 1 at Los Angeles International Airport (LAX).

ed checked baggage inspection and sorting system, an integrated passenger waiting room and concessions program, refurbished arrival and baggage claim area, replacement of the passenger boarding bridges, renovations to airline support office space, relocation of the main entrances towards the west

end of the building to ease traffic congestion, new ramp pavement and hydrant fuel system improvements. Construction began in summer of 2014 and is expected to conclude in spring of 2018. Construction manager and prime see LAX page 22

Gas Tax to Raise $52B for Road Repairs By Jonathan J. Cooper and Sophia Bollag ASSOCIATED PRESS

SACRAMENTO, Calif. (AP) California drivers will see gas prices jump in November and will pay more to register their vehicles come January after Gov. Jerry Brown signed into law a tax hike of $5 billion per year to fix the state’s crumbling highways. But drivers will have to wait months before crews begin repaving neglected roads with the fruits of their higher taxes. State transportation officials have not begun the engineering work, environmental assessments and other necessary preparations before construction workers can begin tearing

up pavement. Brown and his legislative allies said the money was badly needed to fill potholes and repair rutted roads that lengthen commutes and damage vehicles. “Safe and smooth roads make California a better place to live and strengthen our economy,” Brown said in a statement. “This legislation will put thousands of people to work.” In the bill, SB1, the money is split roughly evenly between state highways and local roads. Specific projects haven’t been determined, said Mark Dinger, a spokesman for Caltrans. The California Transportation Commission, appointed mostly by Brown, see GAS page 24

Page 18 • May 14, 2017 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Fossils Unearthed During Metro Purple Line Construction Excavation crews working on the Purple Line subway extension at Wilshire Boulevard and La Brea Avenue in Los Angeles have unearthed a pair of fossils from the Ice Age, marking the second time the project has led to the discovery of ancient remains, Metro officials said. Crews found a camel bone and a bone from a mammoth or mastodon while digging out the future subway station on April 12 and 13, according to Metro. Once the bones were found, the onsite paleontologist diverted digging operations away from the site to preserve the area. The bones were removed and taken to a lab in Riverside to be identified. The camel bone was later identified as a roughly 20-in.-

LA Metro photo

Cogstone workers place an ancient elephant bone in a plaster cast to safely remove it from the Wilshire/La Brea subway station excavation.

long radioulna, or combination of forearm bones, from an extinct Camelops hesternus. “Camel bones are quite rare in the fossil record of our area,” said Ashley Leger, paleontological field director for Cogstone Resource Management, which is providing paleontologist services at the construction site. “We are very excited about what we might discover next in this fossil-rich area.” The second fossil is believed to be a femur of an Ice Age elephant, either a mastodon or mammoth. The bone is about 36 in. long. In November, excavation crews working on the subway project in roughly the same area found a tusk, tooth fragments and a nearly complete mastodon skull. All fossils found at the site will eventually be turned over to the Natural History Museum of LA Metro photo Los Angeles County. The Ice Age femur bone, most likely from a mastodon or mammoth, measures (This story also can be found on Construction Equipment Guide’s website at www.conapproximately 36 in. in length. structionequipmentguide.com.)

RDO Equipment Co. Names Adam Spade as Lakeside GM Adam Spade has been named general manager of the RDO Equipment Co. — Lakeside, Calif., store. Effective immediately, Spade is responsible for leadership in all areas of store operations, working with departments to ensure satisfaction of customers, and upholding the core values, vision, and mission of RDO Equipment Co. Spade most recently served as the general manager of RDO Equipment Co. stores in Flagstaff and Prescott, Ariz. His background in the equipment industry spans nearly a decade. After starting out at Hertz Equipment Rental, Spade took a sales role with RSC Rentals (now United Rentals) in 2009. Beginning in 2010, he held branch manager roles for RSC Rentals in both Cave Creek and Sierra Vista, Ariz., before joining RDO Equipment Co. in 2014. Dennis Howard, vice president of the southwest construction region of RDO Equipment Co. said, “Adam has done a tremendous job leading our Northern Arizona locations. I have no doubt he will continue to build upon the hard work of the Lakeside team and keep driving our business forward.” “I feel fortunate to have worked with such a great group of people in Flagstaff and Prescott, and look forward to working more closely with the team in Lakeside,” Spade said. For more information, visit rdoequipment.com. (This story also can be found on Construction Equipment Guide’s website at Adam Spade has been named general manager of the RDO Equipment Co. — Lakeside, www.constructionequipmentguide.com.) Calif., store.

Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • May 14, 2017 • Page 19

714.323.8845 Expect more with Rush Truck Centers

We keep Crane trucks in stock at all times, and we can meet all of your commercial truck needs.

Rush Truck Center- Whittier, Ca.

Andrew Vivilacqua • vivilacquaa@rushenterprises.com

RENTALS

HEAVY EQUIPMENT

Page 20 • May 14, 2017 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Serving the Construction & Mining Industries Since 1962

Former Rental Units for Sale:

1996 CAT 825G, Excellent 35ton soil compactor with cab, AC, S-Dozer with tilt, 700hrs on rebuilt extra tall feet, 100hrs on in-frame engine kit, original paint. Runs great, no problems, Hours: 19,670, Serial Number: 6RN00285, Stock Number: 3821....$180,000

2000 CAT D8R, Work ready, full dress D8R with EROPS cab, AC, 8SU dozer with tilt, MS Ripper with two shanks, engine side doors, 4200hrs on rebuilt trans, 1700hrs on rebuilt Torq, 50% U/C. Good looking, good running, low hour dozer. NEW LOW PRICE! Hours: 8,350, Serial Number: 7XM04721, Stock Number: 5879................................ $139,000

1997 CAT D5M XL, Cab, AC, 6-way PAT dozer, ripper, 50% tracks but needs shoe regrouser and rollers. 6100hrs on trans rebld., Hours: 11,150, Serial Number: 4BR00308, Stock Number: 5306........................ $55,000

2007 CAT 314C LCR, Excellent compact radis with off-set boom, cab, AC, dozer leveling blade, hyd pin-grabber QC, Bucket. Ready to go! A/C, Heater, Operating Weight (lbs): 15,000, Hours: 5,200, Serial Number: PCA01450, Stock Number: 7076...... $69,900

2001 CAT 325BL, Work ready, cab, AC, reach boom, 3.2M stick, aux hydraulics, QC bucket mount, 500 hours on new tracks. CHECK NEW LOW PRICE! Operating Weight (lbs): 60,000, A/C, Hours: 8,070, Serial Number: 7EN00373, Stock Number: 7279...... $59,000

2002 CAT 330CL, Cab, AC, Long UC, reach boom, 3.9M med stick, Wedge-lock QC and QC GP Bkt Ready to work, with 500hrs on tune-up; turbo, HEUI pump, injectors. NEW LOWER PRICE! Operating Weight (lbs): 72,000, A/C, Hours: 10,160, Serial Number: DKY00419, Stock Number: 7352......$69,000

1999 CAT 345BL, Work ready, 100,000lbs class, cab, AC, reach boom, med stick, aux hyd, thumb bracket, wedge-style QC and GP Bucket. Undercarriage almost new; only 10% worn. CAT CTS report is available. A/C, Operating Weight (lbs): 100,000, Hours: 10,700, Serial Number: 4SS01437, Stock Number: 7490.................................. $55,000

2001 CAT 140H, NEW LOWER PRICE! Low profile Cab, AC, 14' Moldboard, Push block, Ripper, 30% 1400x24 Tires. Ready to work, fully serviced and maintained by large rental company, Maintenance records available, Hours: 12,400, Serial Number: 2ZK05933, Stock Number: 4071........................ $89,000

2002 CAT 740, Work ready, 40ton, 6x6 Artic, cab, AC, 95% 29.5R25 Radials, reblt hitch. Excellent running and maintained former rental unit. Could use paint. One of three available. CHECK NEW LOW PRICE! Hours: 15,000, Drive: 6 WD, Capacity: 40 tn, Serial Number: AXM00363........................ $85,000

(888) 361-4454 • Mike Kustura: sales@EccoEquipment.com

www.eccoheavyequipment.com

Santa Ana, CA – HQ (714) 554-4851

Visalia, CA (559) 651-0116

San Diego, CA (619) 205-2026

Coachella, CA (760) 578-1043

Sacramento, CA (916) 997-7492

Bullhead City, AZ (928) 715-0672

Riverside, CA (951) 276-9025

Stockton, CA (510) 516-5567

Phoenix, AZ (602) 276-2040

Las Vegas, NV (702) 877-4302

Salt Lake City, UT (801) 796-7368

Boise, ID (208) 459-3800 Williston, ND (701) 572-8126

Morales Steps Down as CEO of High-Speed Rail Authority After five years of service and with the California High-Speed Rail program moving rapidly from concept and planning to full-scale construction, CEO Jeff Morales announced that he will step down from his position early this summer, after the Board of Directors is expected to select a replacement. “It has been a true honor to be a part of this important and historic program. I am very proud of the progress we have made in advancing the nation’s first high-speed rail system, against the odds and in spite of all the obstacles,” said Morales in a letter sent today to Gov. Jerry Brown and the California HighSpeed Rail Authority’s staff and Board of Directors. “We have 119 miles of construction under way through three major design-build contracts. To date, the project has supported thousands of jobs, put almost a thousand tradesmen and women to work, and Jeff Morales injected upwards of $4 billion into California’s economy.” “Jeff was instrumental at a crucial point in time and led California’s High-Speed Rail project through a very challenging period,” said Brown. “His dedicated and skillful leadership is exactly what was needed.” Morales was named chief executive officer in May 2012 and will work closely with the Authority’s Board to ensure the smooth transition of a successor. The Authority’s Board of Directors is expected to meet in the coming weeks to consider candidates before Morales officially departs on June 2, 2017. “Jeff has successfully built the organization over the past five years and we’re grateful for his leadership. He moved the HighSpeed Rail project from the planning phase into construction, laying the groundwork for commercial operation,” said Dan Richard, Chairman of the Authority’s Board of Directors. Under Morales’ leadership, the Authority has: • Injected upwards of $4 billion into California’s economy. • Supported thousands of jobs in areas that have suffered chronic unemployment and put almost a thousand tradesmen and women to work. • Engaged more than 300 California small and disadvantaged businesses.

• Grown from just over a dozen employees to more than 200 employees. • Managed three successful procurement bids totaling more than $3 billion in contracts for 119 mi. of construction, with each bid coming in hundreds of millions of dollars below engineers’ estimates. • Advanced the unprecedented environmental approval of the remaining segments. • Secured approval of the “d” plan for expenditure of bond funds, with first bond sales occurring in the past couple of weeks. • Improved the right-of-way acquisition process, recovering from early delays. • Reached agreements with railroads and utilities on critical alignment issues. • Initiated the process to bring an early operator onboard this summer, signaling the shift towards commercial operations. • Negotiated a landmark agreement with the Madera and Merced Farm Bureaus that resolved many agricultural issues and now serves as a template for agricultural land mitigation system-wide. Before serving as chief executive officer of the Authority, Morales was senior vice president of Parsons Brinckerhoff, where he worked with transportation agencies across the United States and internationally to develop and implement major capital programs. He also previously served as executive vice president of the Chicago Transit Authority where he spearheaded major reforms at the nation’s second-largest transit agency, and as director of the California Department of Transportation, where he managed a $10 billion program and more than 23,000 employees working to build, maintain and operate the largest state transportation system in the United States. His experience at the federal level includes serving as a member of PresidentElect Obama’s transition team focusing on transportation; Vice President Al Gore’s National Performance Review; the White House Commission on Aviation Safety and Security; the U.S. Department of Transportation; and as U.S. Senate staff. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • May 14, 2017 • Page 21

14635 Valley Blvd. Fontana, CA 92335

800-316-0327

SOUTHERN CALIFORNIA’S ONE STOP SHOP www.scottequip.com

New and used equipment sales

Full Service Dealership:

Field service capabilities

Experienced parts department

Fully equipped shop

Wide range of equipment rental machines

Page 22 • May 14, 2017 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

$509M Project Will Modernize Southwest’s Terminal at LAX

AvAirPros photo

As they work, construction crews must be careful not to interfere with an operational terminal.

The airline is undertaking a renovation program for Terminal 1 to improve the terminal interior, the outdoor aircraft parking ramp area and the traffic flow around the Central Terminal Area.

LAX from page 17

contractor for the project is Hensel Phelps Construction Co. of Adelanto, Calif. Hensel Phelps Construction Co. is one of the largest general contractors and construction managers in the United States. Program manager is AvAirPros of Atlanta. Design Manager is ODEMCO of Los Angeles and PGAL of Los Angeles is in charge of design and engineering. Project Features 35 Subcontractors Major subcontractors include Morrow Meadows Corp. in City of Industry, Calif.; Murray Company Mechanical Contractors of Rancho Dominguez, Calif.; Critchfield Mechanical Inc. of Irvine, Calif.; Griffith Co. of Brea, Calif.; and Performance Contracting Inc. of Anaheim, Calif. The project features 19 union trades working under a local project labor agreement. About 270 crafts workers are on the job each day. Heavy equipment currently at the Terminal 1 site includes a crane, drill rig, excavator, skip loader, concrete pump, scrapper and forklift. Some special equipment is being used as well including a vacuum truck and GPR scanning equipment. The two items are used to prevent disruption of underground utilities. Workers will lay about 33,000 cu. yds. of concrete over the course of the project. As they work, construction crews must be careful not to interfere with an operational terminal. Crews are not only working with concrete and steel, they are installing a considerable amount of glass. Construction of larger window areas is part of the Terminal 1 project.

AvAirPros photo

Southwest Airlines will provide the upfront funding of the project, but will be reimbursed by Los Angeles World Airports (LAWA) as components of the project are completed.

Terminal 1 opened in 1984 and is in need of modernization to accommodate the needs of a technology-rich, post-9-11 world.

“The project will increase the glass around the terminal by 80 percent,” said Matt Barakat, project manager of Los Angeles World Airports. Multiple Benefits for Travelers Passengers will benefit from a brightened ticketing lobby with additional windows allowing more natural light. In the TSA screening area, new, more efficient screening systems are expected to save time and shorten lines. The project includes a new 12-lane security screening checkpoint and a fully automated checked-baggage inspection and sortation system. Once past the security screening checkpoint, passengers will experience a modernized concourse that includes redesigned waiting areas with additional seating, larger see LAX page 24

AvAirPros photo

Workers will lay about 33,000 cu. yds. of concrete over the course of the project.

Construction Equipment Guide • California State Section • www.constructionequipmentguide.com • May 14, 2017 • Page 23

562.273.7013 www.coastlinecd.com Headquartered: Long Beach, CA

SALES | RENTAL | PARTS & SERVICE “Your Crane and Boom Truck Headquarters”

2012 TADANO GR350XL-2 Stk #: 36450 35 Ton - $240,000

2009 TADANO GR300XL-1 Stk #: 1678 30 Ton - $125,000

2006 TADANO TR150 XL-4 Stk #: 1452 15 Ton - $105,000

PRICED TO SELL CALL NOW!

2016 MANITEX TC450 Stk #: 43376 45 Ton Loc: Santa Ana, CA

2017 MANITEX 22101S Stk #: 64548 Loc: Santa Ana, CA

2017 MANITEX TM200 - 22 Ton Stk #: 67192 Loc: Sacramento, CA

2017 MANITEX 1970C - 19 Ton Stk #: 67574 Loc: Sacramento, CA

2017 ELLIOTT V60F Stk #: 70938 63’ Reach - CALL

2017 ELLIOTT M43R - 48” Reach Stk #: 71466 Available Now!

2012 SKYJACK ZB20044 Stk #: 35393 $125,000

2014 SHUTTLELIFT CD3339 Stk #: 41162 9 Ton - $122,000

2012 TADANO GR550XL-2 Stk #: 35948 55 Ton - $340,000

PRICED TO SELL CALL NOW!

Sterling Awarded $22 Million Bridge Project in Stockton Sterling Construction Company Inc. announced that Myers & Sons Construction is the apparent low bidder on a $21.9 million bridge project in Stockton, Calif. The McHenry Avenue Corridor Improvements project consists of the replacement of an existing two lane bridge that spans the Stanislaus River with a new 1,138 ft. (347 m), 78.5-ft. (24 m)-wide, five-frame bridge with 17,000 linear ft. (5,182 m) of stone column ground improvements. The project is scheduled to begin in April 2017, and is expected to be completed by mid-2020. Paul J. Varello, Sterling’s chief executive officer, commented, “We are pleased to have been selected by the County of San Joaquin to replace the existing bridge on McHenry Avenue. The McHenry Avenue Corridor Improvements project will significantly improve traffic circulation, safety, and air quality in Stockton, Calif. This award exemplifies our unique capabilities in bridge work, and we believe we are well positioned to add similar attractive, profitable opportunities to our backlog during 2017.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

REXIN EQUIPMENT 2641 East Artesia Boulevard • Long Beach, CA 90805 562-531-4600 Or Call Joe Rexin 714-299-2273 www.rexinequip.com

Page 24 • May 14, 2017 • www.constructionequipmentguide.com • California State Section • Construction Equipment Guide

Terminal 1 Updates at LAX Will Improve Traveler Experience LAX from page 22

restrooms and an updated mix of concession offerings. Concessions will be open and inviting with seating that allows a visual connection to the gates and flight information displays. Two full-service restaurants are planned for the space along with a variety of quick-service restaurants, grab and go food offerings, as well as retail stores and gift shops. Concessions also are planned on the arrivals level near the new-and-improved baggage claim to serve the needs of arriving passengers and those meeting and greeting them. Ramp Area Improvements The terminal will accommodate 13 Boeing 737-sized aircraft. Improvements to the ramp area include, new passenger boarding bridges, pavement replacement, a modernized hydrant fuel system and electric vehicle chargers to support an electric ground service equipment program. The terminal’s renovation also will address a condition that impacts the experience of all LAX users, congestion at the intersection of World Way and Sky Way. By reorganizing the interior uses of the

building and shifting the skycap, ticketing lobby and main entrances to the west end of the building, additional roadway distance is created for merging traffic to maneuver to the curb after the intersection. The reorganization also creates additional curb length to accommodate curbside passenger drop-off and pick-up and takes pressure off the intersection to ease congestion. Timing Reduces Construction Impacts Southwest Airlines is working to mitigate construction impacts to passengers by conducting most of the work during off-peak hours. Passengers will notice construction barriers and may hear some work-related noise. The construction team asks that travelers pardon its dust during the renovation process. Construction also means some changes at Terminal 1. Portions of the drop-off lane on the upper-departures level in front of Terminal 1 were closed until March of this year. The entire drop-off lane is closed weeknights from 10 p.m. to 4 a.m. while a canopy is constructed over the sidewalk. “We’ve worked closely with our LAX

AvAirPros photo

More than 8.6 million passengers used the terminal in 2015, the latest year for Terminal 1 passenger statistics.

Station Leadership Team and LAWA throughout the Terminal 1 modernization with construction happening in a phased approach,” said Michelle Agnew, a spokeswoman of Southwest Airlines. That allows for continued operation of about 120 daily

Southwest Airlines flights out of LAX, she said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Brown Signs Bill to Raise Gas Tax, Vehicle Fees to Fix Roads GAS from page 17

will prioritize projects for the funding, he said, and the first construction work will likely begin work in the summer of 2018. A few projects are known, however, including an extension of a commuter rail line between the Central Valley and Silicon Valley, a parkway linking the University of California, Merced to a major state highway and highway expansion in Riverside County. Those projects were promised to undecided lawmakers to win their support for the legislation. Brown also signed the legislation authorizing those projects, SB132, and a bill by state Sen. Anthony Cannella to shield architects, engineers and land surveyors from liability in certain circumstances, SB 496. Cannella was the only Republican in the Legislature who voted for the gas tax increase. He won funding for transportation projects in his Central Valley district as part of the deal.

Most of the money from SB1 will go into Caltrans’ budget for major maintenance projects. More than filling potholes and making spot repairs, the crews will completely rebuild roads in particularly damaged areas, Dinger said. Potential projects include major commuting corridors near Sacramento, Highway 101 in Sonoma County, Interstate 580 in the East Bay and a variety of bridge and pavement projects in the Los Angeles area. The plan aims to address a $59 billion backlog in deferred maintenance on state highways and $78 billion on local streets and roads. It raises gas taxes by 12 cents per gallon in November, rising to a 19.5-cent increase by 2020. Diesel taxes will rise by 20 cents per gallon and diesel sales taxes by 4 percent. Drivers will pay a new vehicle registration fee ranging from $25 to $175 depending on value of their vehicles. The fees and taxes will all rise annually with inflation in perpetuity, raising an estimated $52 bil-

lion over the next 10 years. The measure passed the Legislature on April 6 with support from nearly all Democrats and one Republican. Critics said the tax hikes will hurt people struggling to make ends meet in a state that already has a high tax burden. A conservative talk-radio host has organized an attempt to recall Sen. Josh Newman, a freshman Democrat who narrowly won his Orange County seat last year and voted for the gas tax hike. Senate minority leader Patricia Bates said Brown and Democratic lawmakers should have embraced a plan to fund road repairs that did not increase taxes. “Californians got a lemon of a gas and car tax hike today,” the Laguna Niguel Republican said in a statement. “This tax hike particularly hurts Californians struggling to make ends meet.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

California Road Repair Deal SACRAMENTO, Calif. (AP) Fuel taxes and vehicle fees will increase for California residents after state lawmakers passed a major transportation funding deal that aims to raise $52.4 billion over 10 years to fix a massive backlog in road and bridge repairs. Here’s where the money would come from: • $24.4 billion by raising gasoline excise taxes. In November, the tax will increase 12 cents per gallon, or 43 percent above the current rate of 27.8 cents, and it will continue to rise over the next few years. The total California gas tax is projected to be 46.7 cents in July 2018 and 47.3 cents in July 2019. Starting in 2020, the tax will change with inflation. • $7.3 billion by raising the current 16-cent-a-gallon diesel excise tax by 20 cents. • $3.5 billion by increasing the state diesel sales tax from 9 percent to 13 percent. • $16.3 billion from an annual transportation improvement fee based on a vehicle’s value. The fees range from $25 for vehicles valued at less than $5,000 to $175 for vehicles topping $60,000. • $200 million from a new $100 annual fee, starting in 2020, on zero-emission vehicles. • $706 million in repayments of transportation funds previously loaned to the state’s General Fund. The money would be split between state and local governments: • The local share includes $15 billion to fix potholes, $7.5 billion for public transportation and $1 billion for walking and biking trails. • The state share includes $15 billion for highway repairs, $4 billion for bridge and culvert repairs, $2.5 billion to reduce traffic on major commuter routes. Sources: Governor's office, Department of Finance, Board of Equalization.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 25

Page 26 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 27

S GHT S olutions

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • • • • •

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

Machine g Monitorin

. k s i R e c Redu e Uptime. Increas

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available

All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Colorado Springs, CO Fort Collins, CO Frederick, CO Pueblo West, CO

www.

Albuquerque, NM Farmington, NM Hobbs, NM El Paso, TX

4RiversEquipment ent .com

Page 28 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pros K Pro Kno no ow w! w !

Thos se in the know ow, know o know T Take ak a ke euc uch chi

Tough, To oough ugh, Pow Pow ower weerffuull,, Dependab w ependabble le

POWER MOTIVE CORPORATION

DITCH WITCH OF EAST TEXAS

DITCH WITCH OF ARIZONA

www.powermotivecorp.com

www.witchequipment.net 7809 Hwy. 271 Tyler, TX 75708 903-592-6226 Fax: 903-535-9768

www.ditchwitchaz.com 4028 S. 36th St. Phoenix, AZ 85040 602-437-0351

DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

Milliken 970-587-1188

Colorado Springs 719-576-5541

Cheyenne 307-634-5149

Grand Junction 970-241-1550

Durango 970-259-0455

Tucson, AZ 520-579-0261

TRI-WEST TRACTOR www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200 Fax: 925-455-8220

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 South Main St. Houston, TX 77035 713-551-0506 Fax: 713-551-0798

Corpus Christi, TX 361-884-8275

Edinburg, TX 956-386-0107

San Antonio, TX 210-648-4444

Austin, TX 512-251-0013

Tomball, TX 281-351-9016

Beaumont, TX 409-721-5305

Buffalo, TX 903-322-7150

< Find out what others know, visit takeuchi-u us.com for more info >

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 29

GET MORE DONE WITH ON NE. Why run two macchines when one will do? Whether W you’re loading trucks, busting up blacktop, placing pipe, digging trenches, or moving materials, an LL-Series Backhoe is more than up to the task. By listening and reesponding to our customerss, these versatile machines feature f improved hydraulic systems for additional lifft capability and supeerb multifunction performan nce. And rugged EPA Final Tier 4/EU Stage IV V diesel engines* meet rigid emission regulations, enabling work in nonattainment areas. The result: our most versatile backhoess ever. Ta Take advantage g of un nrivaled capability. p y *Interim Tier 4/Stage IIIB on the 310L EP.

RDO EQUIPMENT CO.

PAPE MACHINERY

www.rdoequipment.com

www.papemachinery.com

Flagstaff 5500 East Penstock Ave Flagstaff, AZ 86004 928-526-0639

Chandler 1400 S Maricopa Road Chandler, AZ 85226 602-845-1800

Imperial 3275 Hwy 86 Imperial, CA 92251 760-355-4331

Pflugerville 16415 N IH-35 Pflugerville, TX 78660 512-272-4141

Phoenix 2649 N 29 Ave Phoenix, AZ 85009 602-415-4700

Lakeside 10108 Riverford Road Lakeside, CA 92040 619-443-3758

Irving 3230 East Airport Freeway Irving, TX 75062 972-438-4699

McKinney 2902N. Central Expressway McKinney, TX 75071 214-856-4899

Prescott 1091 Commerce Drive Prescott, AZ 86035 928-776-8300

Riverside 20 Iowa Avenue Riverside, CA 92507 951-778-3700

Fort Worth 5301 Mark IV Parkway Fort Worth, TX 76131 817-232-8094

New Braunfels 19275 N IH-35 New Braunfels, TX 78132 830-632-3100

Tucson 5051 S Outlet Center Drive Tucson, AZ 85706 520-294-5262

Indio 83-300 Avenue 45 Indio, CA 92201 760-342-8900

Hewitt 215 Enterprise Blvd Hewitt, TX 76673 254-666-3900

Laredo 102 Wilcox Road Laredo, TX 78043 956-718-1909

HONNEN EQUIPMENT CO. www.honnen.com

Newark 800-231-2060 510-790-3600 Fax: 510-790-9120

Rohnert Park 800-325-9401 707-584-9161 Fax: 707-584-4786

5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636

Sacramento 800-227-3399 916-922-7181 Fax: 916-922-4532

Gilroy 800-848-4150 408-848-4150 Fax: 408-848-5163

Durango, CO 970-247-4460

French Camp 800-619-6319 209-983-8122 Fax: 209-983-1105

Redding 530-241-4555 Fax: 530-241-0619

Fowler 559-834-4774 Fax: 559-834-4754

Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441

St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284 Idaho Falls, ID 208-523-9915

Page 30 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Washoe County Schools Names NBA Community Partnership Award Winner

Hlavinka JCB 7105 Hwy. 59 N. Victoria, TX 77905 361-541-6100 Angleton, TX 979-308-6870 www.hlavinkajcb.com

WCSD students learn about heavy equipment at Construction Career-Day.

Nevada Builders Alliance has been chosen to receive one of three Outstanding Community Partnership Awards for 2016-17 by Washoe County School District’s Signature Academies & Career and Technical Education during “Salute to Signatures & CTE,” the program’s annual showcase. “Nevada Builders Alliance has been an incredible partner with Washoe County School District, helping to promote opportunities in the building trades industry for all students, elementary through high school,” Dana Ryan, director of Washoe County School District Signatures & CTE, said. Ryan said one of the best collaborative efforts between Signatures & CTE and Nevada Builders Alliance was the development of the annual Construction Career Day held in October. “During the 2016 event, nearly 500 students, teachers and counselors got to try their skill at wiring, plumbing, framing a wall and maneuvering with large equipment,” Ryan said. “Local employers allowed students the opportunity to experience the industry through interactive, hands-on activities.” Aaron West, CEO of Nevada Builders Alliance, said workforce development is a main focus for the organization, as the booming Nevada economy will require 92,000 skilled trades workers by 2019. Last year, Nevada Builders, in partnership with the Nevada Construction Collaborative, launched BuildNV.org, a website for employers to post openings and job seekers to post resumes along with information about occupations and education in the skilled trades. “Nevada is attracting new businesses and industries,” he said. “With the influx of employers comes the need for commercial buildings, infrastructure and workforce housing to support the employees who are flocking to the area.” West said educating youth about existing opportunities and developing the programs to get people job-site ready are

key to ensuring Nevada’s ability to continue to support unprecedented growth and economically strong communities. “The demand for skilled craft trades workers is reaching critical mass where tens of thousands of construction jobs are begging to be filled,” he said. “We are pleased to partner with Washoe County School District’s Signatures & CTE programs to promote construction as a viable, good-paying career choice. We are accepting this award on behalf of our industry partners who made Construction Career Day such a success.” Ryan said the collaboration between Nevada Builders and Signatures & CTE has impacted hundreds of students and teachers in the Washoe County School District by promoting career pathways in construction and related careers through events, publications and advocacy such as Construction Career Day, “Constructing the New Nevada” magazine, and serving on state and local committees to promote certification, training and employment opportunities. “We are so honored to work with Nevada Builders to improve understanding of building trades and the excellent career opportunities in this field,” she said. “We look forward to continuing to expand and reinforce the message about opportunities to prepare for and excel in building trades careers.” The Nevada Builders Alliance is a professional organization representing the construction industry, and all affiliated sectors. With more than 730 member companies representing tens of thousands of hard-working Nevadans in every corner of the state, Nevada Builders is the voice of the construction industry. For more information, visit nevadabuilders.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Lubbock, TX 806-745-2000 Wichita Falls, TX 940-687-2726 Odessa, TX 432-337-2823 Amarillo, TX 806-372-8386 Midland, TX 432-685-9999 Clovis, NM 575-742-2726 www.ascoeq.com

Hendershot JCB 935 E South Loop Stephenville, TX 76401 254-965-6783 877-207-8782 1841 N US Hwy 286 Decatur, TX 76234 940-965-6783 www.hendershotjcb.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 31

CHA ANGIN NG THE E

LA L AND A AN D CAP DSC PE

The one and a only JCB T Teleskid eleskid is changin changing ng the way landscapers work. Whether you y work in landscape design, soil preep, sod and tree installation or nurseriees and gardens, the all new w JCB Teleskid Teleskid offers ultimate versatility versatilittyy.. With a telescopic boom, now you can load pallets of sod into a pickup truck, reach over obstacles like silt fences without doing any dam mage, load dump trucks from m one side and work below grade to kkeep your machine on safe ground. And A as with any JCB machine, the T Teleskid eleskid has the attachments you need to accomplish any job. Contact Conntact your local JCB dealerr to demo this game changing piece o of equipment.

2240 W. Buckeye Rd. Phoenix, AZ 85009 602-761-2525 Fax: 602-454-8899 www.flaskajcb.com

ProCon JCB 461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON www.procon-supply.com

/JC CBNA

@ @JCBNA

JCBNA

2935 Lincoln Road Las Vegas, NV 89115 702-432-2200 www.jcboflasvegas.com

4541

Page 32 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Four Seasons Equipment, Inc. 8111 Mills Rd. Houston, TX 77064 800-234-5007 Dallas, TX 866-270-1700 Lake Charles, LA 866-222-0053 www.fourseasons-equip.com

Heavy Equipment Rentals & Sales

Orion Equipment

13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.hers-llc.com

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 33

Vermeer Texas-Louisiana

Ditch Witch of Oklahoma/Tulsa

www.vermeertexas.com

www.ditchwitchok.com Edmond, OK 73034 405-348-4633 Tulsa, OK 74116 918-438-1560

Alamo, TX 956-782-5580

Waco (Ross), TX 254-829-9655

Lubbock, TX 806-745-1245

Amarillo, TX 806-622-2407

Irving, TX 972-255-3500

Midland, TX 432-685-9276

Corpus Christi, TX 361-887-8499

Houston (Cypress), TX 281-671-6000

Round Rock, TX 512-244-0505

Denham Springs, LA 225-665-7900

Kilgore, TX 903-988-9868

San Antonio, TX 210-337-7700

Page 34 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Drilling, Blasting...

CDOT Closes I-70 at Fall River Road for Rockfall Mitigation Through June On May 8, CDOT began rockfall mitigation on I-70 at Fall River Road, just west of Idaho Springs. Work is scheduled to continue through June. Crews will be drilling the rock face from 7 a.m. to 7 p.m., Monday through Friday, to release air pockets and loosen rock. This work, which will allow for a more productive blast, will not require a lane closure and is safe for the traveling public to drive past. Travel Impacts • Once a week, crews will need to blast the rock face to release loose rock, which will require a 20-minute full closure of eastbound and westbound I-70 from Fall River Road to Dumont to protect the safety of motorists and CDOT crews. • Crews will blast from 11 a.m. - 3 p.m., between Mondays and Thursdays, though they have not set specific dates as it's difficult to know when the rock face will be ready for detonation. • The full closure could result in 45-plus-minute traf-

fic delays. If urgently needed, crews may need to blast the rock face more than once a week for motorists' safety. • CDOT also will close the frontage roads near the blasting site for additional safety precautions; these holds should be only 15 minutes or shorter. • Crews will know at least the night before when blasting will occur, and variable message signs along the interstate will be changed to reflect the upcoming closures. • Crews will not work the Friday before or the Monday after Memorial Day. CDOT is conducting mitigation work in response to a minor rockslide that occurred on westbound I-70 at Fall River Road in early April. CDOT's geohazards team inspected the slide and determined that mitigation work is necessary to reduce the risk of a slide in the same area in the future. For more information, visit codot.gov. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Montana House Approves Scaled-Down Measure to Boost Road Project Funding The Montana House of Representatives completed the Legislature’s approval of a measure that would raise motor fuel taxes to generate about $30 million a year more for state and local transportation projects. Lawmakers sent to Gov. Steve Bullock a bill that is less than half the size of one the House initially approved in March. That version would have hiked gasoline taxes by 8 cents a gallon and diesel by 7.25 cents this year to generate more than $61 million in the 2018 fiscal year that starts July 1. But the Senate sharply trimmed the tax increases and phased them in over several years. It approved an initial 4.5cent hike for gas and 1.5 cents for diesel, with those increases eventually reaching 6 cents for gas and 2 cents for diesel by 2023, news agencies reported. As a result, once the House accepted the Senate’s changes a state fiscal

The Montana House of Representatives completed the Legislature’s approval of a measure that would raise motor fuel taxes to generate about $30 million a year more for state and local transportation projects. analysis projected that the measure would generate nearly $27.5 million in its first year for state and local roads — after estimating a tribal governments’ revenue share of about $859,000. The fiscal note estimated that $12.5 million in the first year would go to the Montana Department of Transportation and almost $15 million would go to local governments for their transportation needs. Lawmakers also reportedly expected that the measure would allow the state DOT to qualify for the full amount of federal funding the state could receive from the Highway Trust

Fund, to effectively leverage the MDT’s share to generate a much larger federal match. The fiscal note projected that the extra revenue from this measure would grow moderately in coming years as drivers use more fuel and the additional per-gallon taxes kick in. It estimated the measure would let the MDT and local governments split about $27.8 million more in fiscal 2019 and almost $31.6 million in extra funding in 2021. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CASCADE TRADER, INC. www.cascadetrader.net 1380 NW State Avenue • Chehalis, WA 98532 360-748-1182

CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121

FOUR SEASONS EQUIPMENT, INC. www.fourseasons-equip.com 8111 Mills Rd., Houston, TX 77064 • 800-234-5007 Dallas TX • 866-270-1700

HEAVY EQUIPMENT RENTALS & SALES www.hers-llc.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368

JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181

NUECES POWER EQUIPMENT www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-687-2284 Laredo, TX • 956-267-1495 San Antonio, TX • 210-807-8216 San Benito, TX • 956-361-0066 Victoria, TX • 361-433-0672 El Paso, TX • 915-201-4115

www.hceamericas.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 35

The Standard for Safety wheel loaders are very “Hyundai safe machines. Good mirror placement for visibility. The backup camera is a great feature. Getting in and out of the cab is very safe – the door, the steps, the handles all contribute to a safe design for the operator. And once you’re in the cab, it’s very comfortable, no matter what size you are.

”

Toby Vanderpool – President/Owner Vanderpool Construction

More standard features. More value.

www.hceamericas.com To learn more about the safety features built into HL900 series wheel loaders, contact your Hyundai dealer today.

MECOM EQUIPMENT www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135

MESCO INC. MOTOR CITY RENTS www.motorcityrents.com 8707 N 77th Drive, Peoria, AZ 85345 623-463-6842

www.mescoequipment.com 295 S Redwood Road, North Salt Lake, UT 84054 888-388-9114

Page 36 â€¢ May 14, 2017 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

A BIGGER TIPPIN NG LOAD IS ONLY THEE BEGINNING. With up to 75% m more bucket breakout force than the leading competito or models â€” plus XS WR PRUH YLVLELOLW\ Y PRUH K\GUDXOLFF Æ RZ PRUH RSHUDWLQJ FDSDFLW\ F DQG PRUH KRUVHSRZHU WKDQ SUHYLRXV PRGHOV Å D QHZ * RU * 6NLG 6WWHHU U RU * RU * &RPSDFW S 7UUDFN /RDGHU LV VXUH WR PDNHH \\RXU ELJJHVW JJ MMREV ORRN D OR RW PRUH PDQDJHDEOH J /HDUQ PRUH DERXW KRZ WKHVH PDFKLQHV FDQ KHOS VKDSH XS \RXU RSHUDWLRQ Å FDOO XV WRGD\

Irving, TX 972/438-4699 Fort Worth, TX 817/232-8094 Hewitt, TX 254/666-3900 Pflugerville, TX 512/272-4141 New Braunfels, TX 830/632-3100 Laredo, TX 956/718-1909

RDO EQUIPMENT CO.

HONNEN EQUIPMENT CO.

www.rdoequipment.com

www.honnen.com

McKinney, TX 214-856-4899 Chandler, AZ 602/845-1800 Flagstaff, AZ 928/526-0639 Phoenix, AZ 602/415-4700 Prescott, AZ 928/776-8300

Tucson, AZ 520/294-5262 Lakeside, CA 619/443-3758 Riverside, CA 951/778-3700 Indio, CA 760/342-8900 Imperial, CA 760/355-4331

5055 East 72nd Ave. Commerce City, CO 80022 303/287-7506 Fax: 303/288-2215 Durango, CO 970/247-4460 Grand Junction, CO 970/243-7090

Ogden, UT 801/627-0049 Salt Lake City, UT 801/262-7441 St. George, UT 435/652-8003 Casper, WY 307/266-4474

Gillette, WY 307/685-4288 Rock Springs, WY 307/382-5284 Idaho Falls, ID 208/523-9915

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 37

Contact your local dealer: POWER EQUIPMENT COMPANY www.power-equip.com

Denver, CO 303-288-6801 Fax: 303-288-6809

Grand Junction, CO 970-243-0722 Fax: 970-243-0726

Colorado Springs, CO 719-392-1155 Fax: 719-390-9604

Johnstown, CO 970-669-6209 Fax: 970-669-6280

ARNOLD MACHINERY CO. www.arnoldmachinery.com

Salt Lake City, UT Sparks, NV 801-972-4000 Fax: 801-975-9434

775-356-1511 Fax: 775-356-0517

Idaho Falls, ID

Las Vegas, NV

208-523-0822 Fax: 208-523-9918

702-642-9000 Fax: 702-642-8808

Meridian, ID

Phoenix, AZ

208-887-6000 Fax: 208-887-6013

602-414-1900 Fax: 602-414-1904

Twin Falls, ID

Tucson, AZ

208-733-1715 Fax: 208-734-6924

520-294-7677 Fax: 520-294-7670

SIERRA MACHINERY, INC. www.sierraelpaso.com

El Paso, TX

Artesia, NM

915-772-0613 Fax: 915-772-1964

575-746-6592

ROMCO EQUIPMENT CO. www.romco.com

Austin

Houston

Round Rock, TX 512-388-2529 877-851-1026 Fax: 512-388-1781

Houston, TX 713-937-3005 800-865-6998 Fax: 713-937-7541

Buffalo

Longview

Buffalo, TX 903-322-5602 Fax: 903-322-5605

Longview, TX 903-758-5576 Fax: 903-758-3079

Carmine

Rio Grande Valley

Carmine, TX 979-278-3570 Fax: 979-278-3573

Dallas Dallas, TX 214-819-4100 800-227-6626 Fax: 214-819-4102

Ft. Worth Ft. Worth, TX 817-626-2288 866-966-4602 Fax: 817-626-8983

Mercedes, TX 956-565-0100 Fax: 956-565-1765

San Antonio San Antonio, TX 210-648-4600 800-966-4601 Fax: 210-648-1282

ROL Remote Oilfield Location Three Rivers, TX 361-254-2317

PACWEST MACHINERY www.PacWestMachinery.com

Spokane, WA

Eugene, OR

509-534-5933

541-302-3762

Portland, OR

Kent, WA

503-252-5933

206-762-5933

Some companies have you choose power or fuel efficienc cy. Yo ou chose both.

Volvo olv developed the industry’s first fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Trrack machine monitoring, you can focus your attention on more important things — like growing your business. Get the details at volvoce.com/smartfuel.

Page 38 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IEDA Names New President, Four to Board of Directors at Annual Expo The Independent Equipment Dealers Association (IEDA) welcomed incoming President Kevin Fox of Dewitt Equipment Co., in Barrie, ON; and new Board Members Luke Brenner of Heavy Equipment Co. in Austin, Texas; Kenneth Tysinger of May Heavy Equipment in Lexington, N.C.; and Chris Lohman of South Mountain Tractor in Tempe, Ariz.; as well as Treasurer, Kristin Waldie, BBA of CapStone Accounting in Minesing, ON. IEDA’s new president and board members were announced during the Association’s Annual Meeting and Vendor Expo in Orlando, Fla., this past February. Members of the IEDA board of directors serve a maximum of two consecutive years and are responsible for establishing industry best practices and quality used equipment standards.

Outgoing board members include David Williams of International Construction Equipment (ICE), Lakewood Ranch, Fla.; Tanna Trout of Trout Machinery Inc., Casper, Wyo.; Rick Trout of Trout Machinery Inc., Casper, Wyo.; Burt Cunningham of Global Tractor Company, Colleyville, Texas; and Maurice Matson of Matson Machinery Company, Scott Depot, W.Va. During the annual meeting, all four retiring board members were presented with the IEDA Leadership Award, which is given to outgoing board members annually for their contribution to the organization. For more information, visit www.iedagroup.com.

The Independent Equipment Dealers Association (IEDA) welcomed incoming President Kevin Fox of Dewitt Equipment Co., in Barrie, ON.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Barnsco, Inc. 2609 Willowbrook Rd. P.O. Box 541087 Dallas, TX 75220 214-352-9091 Hutto, TX 512-354-4970 Fort Worth, TX 817-740-2400 Walled Lake, MI 248-668-1010 www.barnsco.com

ALLWEST UNDERGROUND RENTALS - SALES - SERVICE 799 Valentine Ave SE • Pacific, WA 98047 800-828-8505 • 253-987-7555 Fax: 253-987-7556 4020 NE Buffalo St. Portland, OR 97211 506-546-8875 Fax: 503-445-2020 8419 219th St. SE Woodinville, WA 98702 425-398-2353 Fax: 425-398-9354 www.allwestunderground.com

ODOT Looks at Suspending Construction, Defers Award on New Highway Contracts At its May 1 meeting, the Oklahoma Transportation Commission took unprecedented action on new construction projects due to the ongoing state budget crisis. The Oklahoma Department of Transportation also updated commissioners on proposals being considered by the legislature that would affect transportation funding and the impacts to construction already underway. Due to the uncertainty of state funding to pay current obligations, Mike Patterson, ODOT executive director, reported to commissioners that the department had asked several construction contractors not to start work on 12 projects that were awarded in previous months. Additionally, Patterson has asked the eight field division engineers to prepare a plan of how to safely and responsibly suspend work on more than 80 road and bridge projects already under construction in the event that the deteriorating state funding trends continue. “Suspending current highway construction due to a proposed reduction in state funding is not something ODOT has ever been faced with, but we are preparing for it now,” Patterson said. “Without a reliable stream of revenue coming in, it wouldn’t be fiscally responsible to keep incurring construction expenses that we have an obligation to pay.” A fuel tax increase is a revenue replacement proposal under consideration by the legislature that would partially offset the proposed cuts. Patterson also noted that issuing new bonds to offset budget cuts is not a fiscally viable option, as in previous years. The agency has more than $485 million in outstand-

ing bond debt, which costs about $57 million annually in debt service. Since 2010, the legislature has authorized several ODOT bond issues to help offset funding diverted from transportation. Now, the agency’s cash balance has been depleted to the point that ODOT is no longer able to cover the required payments up front necessary to receive bond proceeds. Citing funding concerns, the commission voted to defer award of new highway construction contracts for this month, approving contracts financed with only federal and county funds. Highway projects deferred include bridge work on Shields Blvd. over I-35 in Moore and I-35 over US-77 near Davis as well as pavement rehabilitation on SH-11 in Grant County and SH-45 and SH-132 in Garfield County. Commissioners did award 11 contracts totaling $18 million to improve county roads and bridges in nine counties. Contracts were awarded for projects in Beaver, Caddo, Choctaw, Coal, Garfield, Johnston, Kingfisher, Nowata and Pawnee counties. The eight-member panel, appointed by the governor to oversee the state’s transportation development, awards project contracts for road and bridge construction every month. The next meeting is scheduled for 11 a.m. June 5. For more information, visit www.odot.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

WAUKESHA PEARCE INDUSTRIES INC. 3106 North Highway 42 • Kilgore, TX 76131 903-984-2011 Fax: 903-984-1596 www.wpi.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 39

A-Z Equipment Rentals & Sales www.a-zequipment.com East Valley/Gilbert 1313 E. Baseline Rd. Gilbert, AZ 85233 480-539-8700 North Phoenix 602-992-1150 West Valley 623-925-0200 Central Phoenix 602-955-5100

Orion Equipment 18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Tejas Equipment 6380 Randolph Blvd. San Antonio, TX 78233 210-590-2445 Fax: 210-590-1432 McAllen, TX 956-682-1312 www.tejasequipment.com

APCO Equipment Corp. 3432 N. 5th Street North Las Vegas, NV 89032 702-871-7474 Fax: 702-368-0871 www.apcoequipment.com

Page 40 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 41

Witch Equipment Co., Inc. Fort Worth, TX | 817-429-4824 Hewitt, TX | 254-666-3344

Ditch Witch Southwest Lubbock, TX | 806-745-6866 Odessa, TX | 432-617-8351

Ditch Witch of Oklahoma Oklahoma City, OK | 405-348-4633 Tulsa, OK | 918-438-1560

Ditch Witch of Arkansas Benton, AR | 501-316-3200 Springdale, AR | 479-419-9771

Ditch Witch Northwest Portland, OR | 503-286-6400 Tukwila, WA | 206-995-8420 Billings, MT | 406-252-7667

Ditch Witch of New Mexico, Inc. Albuquerque, NM | 505-345-1888

Ditch Witch of Arizona Phoenix, AZ | 602-437-0351 Tucson, AZ | 520-579-0261

Ditch Witch Equipment Co. West Sacramento, CA 916-371-6000

Ditch Witch of East Texas Tyler, TX | 903-592-6226

Ditch Witch of Houston Houston, TX | 713-462-8866

Page 42 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ditch Witch of Arizona ditchwitchaz.com Phoenix, AZ 602-437-0351 Tucson, AZ 520-579-0261

Honnen Equipment www.honnen.com Denver, CO 303-287-7506 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Ogden, UT 801-627-0049 Salt Lake City, UT 801-262-7441 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

CDOT’s 6th Avenue Improvements Under Way in Aurora The Colorado Department of Transportation and contractor partner, Martin Marietta Construction, began work to repair 2 mi. of roadway surface on 6th Avenue (CO 30), from Potomac Street to North Airport Boulevard in Aurora. Two bridges within the corridor also will be repaired and 49 curb ramps will be upgraded. “Both CDOT and Martin Marietta are pleased to get this project under way,” said Paul Jesaitis, CDOT Region 1 transportation director. “This section of roadway has met its lifespan expectancy and is showing signs of failure. It is important to CDOT to get roads like this back into a state that will improve overall safety and comfort for motorists travelling through the corridor.” The goal of this project is to ensure that the impact on the traveling public is minimal. Traffic Impacts The majority of work will be performed at night, between the hours of 7 p.m. to 7 a.m., Sunday through Thursday. Concrete curb and gutter work will be performed during the day. Some weekend work may be necessary. This project consists of removing and replacing 2.5 in. of asphalt on 6th Avenue, from North Airport Boulevard to Potomac

Street, in both directions. After milling is complete, areas of the road in need of full depth restoration will be identified by field personnel. Damaged areas will then be excavated to a depth of 6 in. below the asphalt and reconstructed with 6 in. of road-base and a layer of asphalt. In addition, 6th Avenue will receive new roadway markings and signage. Structural improvements will occur at the 6th Avenue box culvert over High Line

Canal and the 6th Avenue bridge over Toll Gate Creek. Both structures will be milled down to the bare deck and inspected for concrete in need of repair. Weakened concrete will be removed and patching materials will be applied. The structures will then be waterproofed and paved with asphalt. These repairs are necessary in order to prevent corrosion and degradation of the structures’ concrete. Additionally, 49 existing curb ramps will

be reconstructed and brought into compliance with the Americans with Disabilities Act (ADA). Project completion is expected by the end of summer 2017. All work is weather dependent and schedules are subject to change. For more information, visit codot.gov. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 43

MORE POOWER. LESS FUEL. With KOBELCO excavators, you get best-in-class ^m]d ][gfgeq ]n]jq lae] qgm Új] mh l`] ]f_af] no matter how tough the job. With our latest ?]f]jYlagf )( eY[àf]k$ o] j] lYcaf_ l`Yl ]^Ú[a]f[q lg Y o`gd] f]o d]n]d& L`]k] f]o eY[àf]k fgo ZgYkl mh lg Y / af[j]Yk] af ogjc ngdme] h]j `gmj oàd] Ydkg hjgna\af_ mh lg Y )( af[j]Yk] af ^m]d ]^Ú[a]f[q af K % eg\] Yf\ Yf Y\\alagfYd . af =;G % eg\]& Hml gf] lg ogjc gf qgmj f]pl bgZ Yf\ Y\\ kge] k]jagmk hgo]j to your bottom linne.

MINI

SHORT RADIUS

CONV N ENTIONAL KOBELCO-USA.COM

Page 44 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Montana’s First Urban Mixed-Use Development Progresses DEVELOPMENT from page 1

Old Sawmill District photo

ished Polleys Square building A in August of 2016 and B in January of this year. Along with condos, building A has two commercial spaces. Polleys Square Units C and D are currently under construction and are scheduled to open in 2018. There will be a total of 73 condos when all four buildings are completed. Cambium Place, a mixed-use building with a neighborhood market, fitness center, office space, underground parking and 65 apartments is currently under construction. It will stand just west of the Polleys Square condominium cluster south of Wyoming Street. Completion is slated for June 2018. Polleys Square will stand three- and fourstories tall. Cambium Place is a four-story building. “Cambium Place is a separate project from Polleys Square, but is being built by the same developers,” said Linnea Stanhope, a spokeswoman of Old Sawmill District. Quality Construction is Contractor Developer for the projects is OSD Development LLC and contractor is Quality Construction, both of Missoula. Quality Construction’s previous projects include University of Montana Law School and Grizzly Stadium, both in Missoula. Architect for Polleys Square is MMW Architects of Missoula. Kephart Architects of Denver is architect for Cambium Place. Old Sawmill Concept Much of the design work is based on the old sawmill concept. “We have tried to keep the sawmill district look and feel incorporated into the neighborhood,” Stanhope said. “You can see the use

Old concrete foundations were dug out and crushed, then used to fill excavated log ponds along with other fill material from the site.

of the black iron features and industrial look of Polleys Square. The sinker logs and corrugated metal from the mill site were used to construct the pavilion and picnic shelter in Silver Park.” Ready for Revitalization Old Sawmill District runs along the Clark Fork River. The property long known as the “mill site” has sat vacant since the early 1990s — unused and unsightly, but considered rich with potential. As Old Sawmill District it will be a lively urban neighborhood where people live, work, shop and play. Along the river, Missoula will gain a 14-acre city park that

extends the beautiful Clark Fork trail system. The 46-acre district has been cleaned up and made ready for an urban, multi-use, residential and commercial neighborhood. The Old Sawmill District site is adjacent to the downtown core and established residential neighborhoods. High-End Apartments in Demand Interviewed in Missoula Current, Ed Wetherbee, founder and developer of Old Sawmill District, said that while the demand for high-end apartments exists in Missoula, the market is short on supply. He added that although the high-end rental concept exists in other parts of the country, it is still new to

Missoula. Demand for condominiums also is said to exceed supply. “Yes, demand is there and justified by the number of sales we have already seen in Polleys Square,” Stanhope said. “People love our location and close proximity to the hub of the Missoula trail system and short distance from downtown and the University of Montana.” Preparing Old Mill District for Construction After nearly 100 years as a lumber mill, the 46-acre site was cleaned up and made see DEVELOPMENT page 58

Old Sawmill District photo

After nearly 100 years as a lumber mill, the 46-acre site was cleaned up and made ready for an urban, multi-use, residential and commercial neighborhood.

Future development in the 46-acre district is expected to bring total construction costs to $250 million at build-out.

Page 46 • May 14, 2017 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Montabert USA Launches New Drill The Montabert CPA 295 rock drill use of a quick coupler,” said Gaetan company’s reliable, longstanding repuattachment is an excavator-mounted Julien, product drilling specialist of tation in the market,” said Giroudon. rock drill attachment aimed to match Montabert. “You can go from digging, Montabert invented the world’s first or exceed the production rate of con- ripping rock or breaking rock, and then hydraulic drifter in the 1960’s, and has ventional drill rigs currently in the mar- be drilling again minutes later. The been working ever since to innovate ket. Its versatile options allow contrac- excavator’s quick coupler, standard and improve its original technology. tors to drill holes from 3 to 4 in. (7.6 to auxiliary hydraulic plumbing and a “Today, miners and contractors 10 cm) in diameter, up to 72often refer to our drifters as ft. (22 m) deep, decreasing the ‘gold standard.’ We typical costs while increasachieve this status by maxiing application potential. mizing performances, low The diverse application posrunning cost and uptime for sibilities include everything customers.” from a quarry or pipeline Other features of the CPA project to a demolition or 295 include an efficient development site. hydraulic dust control sysMontabert General tem, rod carrousel and a Manager Stephane radio remote control, makGiroudon said the CPA 295 ing it easy to operate the drill fills a void in the market. attachment from anywhere, “Before the CPA 295, and Montabert’s legacy and growing demand and cost The Montabert CPA 295 rock drill attachment allows advanced Intelsense conconcerns were calling for contractors to drill holes from 3 to 4 in. (7.6 to 10 cm) troller system. This system bigger drilling attachments in diameter, up to 72-ft. (22 m) deep. automatically detects and with larger hole diameter analyzes various rock layand depth options, at greater speeds. 24VDC power supply suffice for the outs to best optimize the drifter striking This attachment’s versatility and capa- installation. It not only saves our cus- frequency and energy, also improving bility meet those needs.” tomers on acquisition and operating operating costs, uptime and ease of The attachment can be mounted on costs, but also limits downtime.” maintenance, according to the manuany excavator weighing more than 25 “The CPA 295 outperforms compet- facturer. tons (22.6 t), does not require any ing products in both power and effiFor more information, visit major modifications to the machine, ciency thanks to its patented controls, www.montabertusa.com. (This story also can be found on and is very easy to connect and install. and it is equipped with the latest gener“It can be mounted on and off an ation of Montabert’s hydraulic drifters, Construction Equipment Guide’s website at excavator in about ten minutes with the the HC95, that have contributed to the www.constructionequipmentguide.com.)

Designed to work with Holland FW35, FW33 and FW0070 fifth wheel models, inboard and outboard mounting systems are adaptable to all fifth wheel configurations.

SAF-HOLLAND: Severe-Duty Slider Fifth Wheel System

SAF-HOLLAND, a global manufacturer of trailer suspension and axle systems, truck suspensions, fifth wheels, landing gear and coupling products, introduced its new severeduty slider system for Holland fifth wheels for heavy and severe-duty hauling operations. The Holland severe-duty slider system has 80,000-lb. (36,287 kg) vertical load and 200,000-lb. (90,918 kg) drawbar pull capacity. Designed to work with Holland FW35, FW33 and FW0070 fifth wheel models, inboard and outboard mounting systems are adaptable to all fifth wheel configurations including Holland Kompensator and no-tilt wheels. Kompensator mounting systems provide fifth wheel top plate side-to-side cradle movement on uneven terrain, relieving torsional stress and twist for high CG rigid trailers. Notors and rental houses. It provides enhanced performance in milling applications, material pickup, parking lot, road main- Tilt mounting systems provide for seamless conversion to a tenance and job-site cleanup, according to the manufacturer. rigid No-Tilt fifth wheel for applications where articulation is This unit works well for indoor application cleanup, as it fea- provided on the trailer. tures a “waterless” dust abatement system. The severe-duty slider’s modular, service-friendly design The pickup/ hopper broom with a waterless dust abate- allows fifth wheel heights to be easily changed. Available ment system features: bracket-mounting heights range from 8- to 11-in. (20 to 28 • A large industrial filter, eliminating potentially large dust cm), and can be easily changed to meet all OEM and heavyclouds • 12 volt shaker dislodges loose debris from the filter haul customer configurations. The severe-duty slider system provides slide travels — 12, 24-, 36-, 48-, 60-, and 72-in. directly into the hopper • A slotted brush assembly allowing the brush to move (30.5, 61, 91, 122, 152 and 183 cm) to accommodate a wide vertically for ease of operation range of weight distribution and clearance needs. Two-in. (5 • A hydraulic cylinder that drops the bucket floor when cm) slide increments enable versatile positioning to meet any dumping dirt and debris • Two caster wheels mounted on the side toward the front payload distribution requirement. New visual plunger lock indicators are located toward the of the broom to prevent the user from rolling too far forward, front of the slide bracket for easy visibility so drivers can preventing damage to the skirting and the frame The EDGE pickup/hopper broom with a waterless dust quickly ensure that the slide bracket is securely locked in abatement system comes complete with hoses and couplers place. In addition, the in-cab air slide release control allows as well as a bolt-on cutting edge to fit most compact loaders. This unit is available in 60, 72 and 84 in. (152, 182 and 213 drivers to easily reposition the fifth wheel when required. For more information, visit www.Safholland.com. cm) widths.

EDGE Provides Enhanced Performance Manitou Americas Inc. announced the EDGE pickup/hopper broom with waterless dust abatement system to their broom lineup for compact loader attachments. The EDGE pickup/hopper broom with a waterless dust abatement system is a cost-effective investment for contrac-

The EDGE pickup/hopper broom with a waterless dust abatement system comes complete with hoses and couplers as well as a bolt-on cutting edge to fit most compact loaders. This unit is available in 60, 72 and 84 in. (152, 182 and 213 cm) widths.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 14, 2017 • Page 47

PLEASE CONT TA ACT YOUR LOCAL DEALER D ALASKA TYLER RENTAL A , INC. Juneau • 907-780-2210 0 Ketchikan • 907-225-6 6069

YUKON EQUIPMENT, IN NC. Anchorage • 907-277-154 1 1

ARIZONA ARNOLD MACHINERY COMPANY Phoenix • 602-414-190 00 Tuscon • 520-294-7677

CALIFORNIA CENCAL MACHINERY CO., INC. Fresno • 559-233-3836

MISSION VALLEY A TRACTOR & EQUIPMEN NT San Jose • 408-933-23 300

NOBLE RENTS, INC. Ventura • 805-201-1488

RDO EQUIPMENT CO. Riverside • 951-682-53 353

RDO EQUIPMENT CO. (WISE) Lakeside • 619-270-43 300

SO CAL TURF AND TRA ACTOR Sun Valley • 818-252-19 900

SONSRAY Y MACHINERY LLC El Cajon •619-873-0123 3 Fontana • 909-355-1075 7 Los Angeles • 562-903 3-7377 Redding • 530-245-9000 Sacramento • 916-649-0096 San Leandro • 510-562 2-0653

TRI-WEST TRACTORS, INC. Livermore • 925-455-8200 8

COLORADO POWER EQUIPMENT CO C . Colorado Springs • 888 8-690-8292 Denver • 800-883-928 84 Grand Junction • 800-898 8 -7319 Johnstown • 970-669--6209

WORLDWIDE RENTAL A SERVICES Aurora • 303-341-5555 5

HAW WAII A HERTZ EQUIPMENT RE ENTAL A (9777) Kapolei • 808-682-820 00

HERTZ EQUIPMENT RE ENTAL A (9779) Kailua Kona • 808-331331-1304

IDAHO ARNOLD MACHINERY COMPANY Boise • 208-887-6000 Idaho Falls • 208-523-0822 Tw win Falls • 208-733-17 715

MODERN MACHINERY CO., INC.

Since 1942, 42, Allied® hydr d aulic attachments have consisten ntly stepped u up to meet challenges from o contrac a tors and municipali alities who need stronger o r equipment with more reliabili e ty and operating efficienc cy. Our Rammer® and Allied hydr d aulic hammers, as well e l as our Ho-Pac® and Skid-P -Pac® compactors, are designed to actually ve erify and improve e yo our carrier ROI decisions. Proving a again and again that nobody body knows how to de elive er hydr d aulic produc o tiv vity under pressure like Allied. Fo or details, visi isit an Allied dis stributor or call 800-321-1046.

T THERE’ ’S S NO S SUBSTITUTE FOR F OR E EXP PERIENCE ERIENCE

ALLIEDCP DCP.com | 800.321.1046

Boise • 800-221-5211

MONTANA A MODERN MACHINERY CO., INC. Missoula • 800-332-16 617

TITAN A MACHINERY Billings • 406-259-550 00 Great Falls • 800 800-332-9818 Missoula •888-976-7782

NEVAD A A ARNOLD MACHINERY COMPANY Elko • 775-738-4443 Las Vegas • 702-642-9000 9 Sparks • 775-356-1511

SHAFER EQUIPMENT CO., INC. Sparks • 888-578-548 81

OKLAHOMA G.W. VAN A KEPPEL COMPANY Oklahoma City • 40 05-495-0606 Tulsa • 918-836-885 8 1

OREGON MODERN MACHIN NERY CO., INC. Eugene • 800-826 6-9811 Portland • 800-95 50-7779

MOEN MACHINER RY CO. Gresham • 866-66 66-9159

NEW MEXICO

TEXAS

GOLDEN EQUIPMENT COMPANY

2-C EQUIPMENT, LL L C

Albuquerque • 505-345 5-7811 Farmington • 866-293-523 7

POWER EQUIPMENT CO C . Albuquerque • 505-3444 9466

WORLDWIDE RENTAL A SERVICES Albuquerque • 505-897-5929

Jarrell • 512-746 4 -2350 2

BANE MACHINERY, INC. Dallas • 800-594--2263 Fort Worth • 817-84 8 7-5894

GEORGE P. BANE, INC. Ty yler • 800-594-2200 2

WASHIN NGTON H&V EQUIPMENT Corpus Chris sti • 888-598-5663 San Antonio • 800-933-5623 Progreso • 956 56-565-3788

NOBLE IRON, INC. Houston • 85 55-767-4424

YELLOWHOUSE MACHINERY CO. Abilene • 800-592 0-592-4468 Odessa • 800-658 0-658-9888 San Angelo • 800-658-9130

UTAH A ARNOLD MACHINER C Y COMPANY A Salt Lake City • 801-972-4000

WORLDWIDE RENTAL A SERVICES Salt Lake City • 8011 978-3300

CENTRAL L MACHINERY SALES, INC. Moses Lake • 800-572-0430 Pasco • 888-547-9003

FARMERS RS EQUIPMENT COMPANY Lynden • 844-303-3575

KITSAP TRA T CTOR & EQUIPMENT Silverda ale • 888-988-6767

MODERN N MACHINERY CO., INC. Kent • 8 800-669-2425 Spokane ne • 800-541-0754

SONSRAY MACHINERY LLC Auburn • 253-735-2702

STAR A RE ENTAL A S & SALES, INC. Seattle • 206-622-7880

TYLER RENT R A , INC. AL Chehalis s • 360-748 4 -3440

VAL ALLEY TRACTOR AND EQU UIPMENT Wenatchee • 800-461-5539

WYOMING POWER W EQUIPMENT CO. Ca asper • 307-577-9700

TITAN A MACHINERY Gillette • 800-697-3006

Page 48 • May 14, 2017 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

COUNT ON OKADA. Carriers prefer demolition attachments made by Okada America. Okada’s demolition attachments expand the versatility of the excavator, mini-excavator, loader/backhoe, skid-steer and track loader carriers. Okada has a wide variety of attachments. Breakers. Demolition Shears. Crushers. Pulverizers. Processors. Grapples. Compactors. Screening Buckets. These attachments are precision-engineered, productive and dependable. You can Count on Okada. Call 1-800-270-0600 for the name of the Okada America, Inc. Distributor nearest you.

12950 SE Highway 212 Clackamas, Oregon 97015

904 Medina Road Medina, Ohio 44256

115 Commerce Boulevard Cleburne, Texas 76033

www.okadaamerica.com

SEPPI Unveils New Version of Forest, Stone Crusher Some years ago SEPPI M. began its series of universal mulchers, to let a single device perform several tasks. This versatility enables each of them to mulch bushes, wood or thick roots and to crush stones, even below ground. The Multiforst, Starsoil and Maxisoil, for big tractors of 200 to 450 hp, are similar already. The new model — Midisoil dt — is one of the smallest of its kind and is meant for tractors of 100 to 170 hp. Due to key functional enhancements, this model eases the workload and lets many customers economize, even those with small forestry companies or contractors from various fields, according to the manufacturer. This versatile tiller is available in several working widths, ranging from 69 to 98 in. (175 to 250 cm). It has a new drive system, which makes work even simpler and more efficient. It tills the soil to a depth of 9.8 in. (25 cm), breaks stones up to 9.8 in., and wood up to 9.8 in. The working speed, according to the materials and nature of the soil, ranges from 0 to 1.2 mph (0 to 2 kmh), a tractor with CVT/IVT transmission is recommended. The Midisoil dt differs from classical wood mulchers or stone crushers in that it has a new gearbox with 2SPEED transmission. This makes it possible to use a higher

rotor speed for wood and a slower speed for rocks and soil. It works very simply: By mechanically switching a lever on the main transmission, the operator can lessen the rotor’s speed from about 1,000 to 540 rpm, whereby the speed of the tractor’s PTO remains set at 1,000 rpm. This provides more torque and ensures better work with a lesser consumption of power, whether mulching wood (at a higher speed) or crushing stones and soil (at a lower speed), according to the manufacturer. This versatility is achieved by using a new spur gear. The main gearbox of the Midisoil dt in 2SPEED, as well as the double drive with parallel gear transmission, is fitted with an integrated cooling circuit. This can be switched on easily from the tractor cabin by using the control unit supplied, and the temperature can be checked continually on a dial. This eliminates the risk of overheating the drive while continuously working in stones and soil. A further safety-measure is the integrated torque-limitation in the drive system. The drive with the spur gear has been designed to

be especially narrow and space-saving, so the difference between the whole width and the effective working width is minimal. Further features are: • lightweight construction — housing

with replaceable Hardox wearplates • high performance with minimal power consumption, due to lightweight construction (1,700 to 2,600 kg, according to the working width and equipment) • a rotor of the new generation with an efficient combination of new tools; Super Mono Protect and Super Mono Extreme with additional tungsten carbide inserts on the wearpoints, while an easier and faster

exchange of hammers minimizes downtime • a hydraulically adjustable hood • an adjustable breaking bar and crushing grid for determining the degree of crushing • ISO three-point rear linkage category 3, central fixed • the innovative gear-tilt system ADAM (opt.) for optimal groundcontour following; this “angle-compensation” protects the PTO shaft and the PTO of the tractor from needless exposure to uneven surfaces • a hydraulic compacting roller (opt.) with a very robust roller-bearing and toothed rings (which can be used as a pressure device too) with roller scraper (especially important in moist soil) When tilling waste land and rocky farmland, renewing forest roads and ski-slopes, renewing farmland and other green areas, cleaning the forest after harvesting, maintaining gas and electricity lines, preparing building sites and much more, Midisoil dt can be an efficient tool if used with a suitable tractor, according to the manufacturer. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 14, 2017 • Page 49

MDR24

BC285.5

BACK-FILLER

BRUSH CUTTER

MDR24

ST7

COMPOSTER

SNOW THROWER

• Rotate bucket up to 180% • Increase productivity up to 50% • Eliminate extra equipment on jobsite Videos and more at

experiencethetilt.com

Page 50 • May 14, 2017 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Vacuworx Provides Mid-Range Material Handling Solutions With a lighter weight, smaller size and brand new attachment options, the AMC Series Lifting Systems can truly go where no other vacuum lifters have gone before. The AMC 6 and AMC 4 models operate in conjunction with compact to mid-sized excavators, as well as with truck mounted articulating cranes, using the hydraulic power from the host machine without a significant reduction in the equipment’s overall lifting capacity, according to the manufacturer. Small But Mighty Suited for steel, poly or concrete pipe, as well as trench plate and concrete slabs, the AMC Series was designed to offer versatility and functionality to contractors and rental companies who often work in congested street applications or other tight areas. In these situations, the host equipment must be able to maneuver in relatively small or busy spaces, which means the attachment must be as small as possible without sacrificing power and reliability. With mounting options for both traditional excavators and truck cranes, the AMC Series is able to load and unload materials while maintaining a compact overall footprint. In addition, the lightweight, self-contained design is hydraulically powered to eliminate fuel costs, emissions

The AMC 6 and AMC 4 models operate in conjunction with compact to mid-sized excavators, as well as with truck mounted articulating cranes, using the hydraulic power from the host machine without a significant reduction in the equipment’s overall lifting capacity.

and noise, making it the perfect solution for work in urban areas. The AMC 6 has a lift capacity of 13,200 lb. (5.987 kg) and comes standard with a pin adapter to mount on an excavator. The AMC 4 features a hydraulic quick change adapter for truck crane applications and has a lift capacity of 8,800 lb. (3,991 kg). Both models can accommodate single or double vacuum pad arrangements, depending on the material to be lifted. Integrated legs provide stability and protect the bottom of the pad(s) during storage; they rotate up and lock when the lifter is in use. Vacuum lifting is a safer and more efficient alternative to traditional lifting methods such as anchors, hooks, slings and chains. Especially important in high traffic areas, 360 degree rotation and wireless remote operation provides precise placement of materials without the need for tag line operators on the ground. In addition, vacuum lifting will not damage delicate materials or bonded coatings, and it eliminates the need for costly cribbing or spacers, according to the manufacturer. For more information, call 918/259-3050 or visit vacuworx.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Geith Unveils New Feature, Complete Coupler Lineup Geith displayed a new crusher feature and a wide range of couplers at this year’s ConExpo. The featured coupler options include Geith’s manual quick coupler, tilting coupler and hydraulic quick coupler, all designed to maximize safety, performance and reliability for end-users. Geith’s manual quick coupler will be featured as part of the company’s new concrete crusher unit. “This is the very first time the Geith crusher is available with manual coupler capability,” said Geith Sales Manager Adrian Kelly. “This unit illustrates how Montabert continues to create high-performance, reliable solutions for our customers as their needs and applications evolve.” The GT Series concrete crushers are designed for use with excavators weighing between 14,000 and 180,000 lbs. (6,350 to 81,646 kg) in recycling and demolition applications. The series utilizes the excavator’s hydraulic forces to crush concrete and cut rebar without requiring any additional hydraulics. The crushers are made

The GT Series concrete crushers are designed for use with excavators weighing between 14,000 and 180,000 lbs. (6,350 to 81,646 kg) in recycling and demolition applications.

of high strength, abrasion resistant steel and wear resistant alloy pivot bearings. Geith’s corresponding manual quick couplers are reversible and allow easy installation, all manufactured to match or exceed specific OEM specifications.

Geith’s tilting quick coupler on display featured a Geith bucket, and is designed for use with excavators, mini-excavators and backhoe loaders weighing between 6 and 26 tons (5.4 to 23.5 t). It is operated entirely from the inside of

the cab and saves time and money for operators by providing up to 180 degrees of side-to-side rotation to dramatically increase versatility and productivity. The tilting quick coupler has a “curl to release” control system and four independent

locking components to meet all current and proposed safety standards (ISO/DIS 13031), as well as an internal relief valve for overload protection and a variable pin center design to accommodate a wide variety of OEM attachments. The hydraulic quick coupler was featured as part of the Geith package display with a heavy-duty bucket and hydraulic thumb. All Geith hydraulic couplers are recognized for their safety, reliability and performance, and comply with applicable international standards and regulations. They feature front and rear safety locks, a safe release curl to open option, and low maintenance compared to competitors. They are light-weight but durable, and save users about 25 percent in operational time due to their high performance, according to the manufacturer. For more information, visit www.geith.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 14, 2017 • Page 51

TObyUtheGH TO BUCKETFUL. Geith® attachments are made stronger, designed to work harder, and engineered to f it per fec tly on your excavator. There are buckets, and then there are Geith b buckets. Se e wha t we ’re m a d e o f a t G e it h .c o m 2905 Shawnee Industrial Way, Suwanee, GA 30024 T. 866 -563-5890 E. ussales@geith.com Geith® and the Geith logo are trademark s of Geith International Limited.

Page 52 • May 14, 2017 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

6, 7 and 8 Foot Models

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 14, 2017 • Page 53

Page 54 • May 14, 2017 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

John Deere Root Rakes Work for Variety of Jobsite Tasks The toughest land-clearing and ground-leveling jobs are no match for the new John Deere Root Rakes (RR72, RR78 and RR84), the latest additions to the everexpanding lineup of Worksite Pro attachments. Optimized to work with John Deere G- and E-Series skid steers and compact track loaders (CTLs), and K-Series compact wheel loaders, these attachments get the job done quickly and can be a more economical option over dozer blades, according to the manufacturer. The root rakes are ideal for land clearing, ground leveling and moving materials away from buildings and obstructions. These attachments were designed to easily gather rocks and debris, while allowing soil to sift through, for minimal site and landscape disturbance and maximum efficiency. Built with alloy-steel construction, replaceable pin-on teeth and zincplated, pivot pins with protected Zerks, these attachments can ruggedly resist impact that any ground materials provide. Another

These attachments were designed to easily gather rocks and debris, while allowing soil to sift through, for minimal site and landscape disturbance and maximum efficiency.

key feature is a weld-on “D” ring that expands the list of job site tasks these root rakes can tackle, such as pulling brush in forestry applications or scrap on a job site.

“The root rakes are exceptional additions to our line of Worksite Pro attachments that increase the productivity of any compact machine being used in job site prep

applications,” said Gregg Zupancic, product marketing manager, John Deere Construction & Forestry. “We designed this line of root rakes to be a tough solution,

ready to take on any terrain in its path.” The root rakes are available in 72-in. (183 cm), 78-in. (198 cm) and 84-in. (213 cm) width — the RR72, RR78 and RR84 respectively — for maximum productivity. The height and width of the root rakes also help shield the fronts of the machines, protecting against damage from large piles of brush or jagged scrap. With the universal, self-cleaning Quik-Tatch easy attachment system found on all John Deere skid steers, CTLs and compact wheel loaders, the machine can easily add and remove the root rake in no time. The new attachment also is backed by John Deere parts, service and warranty coverage. Like all Worksite Pro attachments, the root rake is also compatible with many competitive models. For more information, visit www.johndeere.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

HDB Series…

Hyundai’s Hydraulic Breaker Series Includes 14 Models The HDB series of hydraulic breakers from Hyundai Construction Equipment Americas Inc. includes 14 different models to fit multiple machine sizes and applications. Hyundai breakers have a large chisel diameter, which increases the strength and durability of the chisel. Four chisel options are available. Hyundai small breakers are suited to fit compact excavators ranging from 1.7 to 8 tons (1.5 to 7.2 t). Midsized HDB breakers are designed to fit excavators ranging from 14 to 25 tons (12.7 to 22.6 t). Large model HDB breakers fit excavators ranging from 30 to 80 tons (27 to 72.5 t). For use on a Hyundai excavator, standard equipped mounting brackets match up perfectly with the Hyundai linkage. When used on other excavator brands, Hyundai dealers can fit custom mounting brackets for any machine. The HDB breakers offer a large diameter tie bolt for high performance and optimum durability. Hoses connecting the inlet/outlet ports use a new adapter type that avoids bolt breakage and oil leakage. An auto-greasing feature protects moving parts from undue wear. For more information, visit www.hceamericas.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The four mid-sized models in the Hyundai HDB series of hydraulic breakers are designed for use on excavators in the 14- to 25-ton (12.7 to 22.6 t) range.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • May 14, 2017 • Page 55

GET POWERFUL L PRODUCTIVITY WITH BTI A ATT TACHMENTS ACHMENTS & ROCKBRE EAKER SYSTEMS 1-8 800-567-8267 I www.r . ockbreaker.com

Includes Spill Guard...

Skid-Lift Scissor Lift Side Tilt Esco Offers General Purpose Feature Levels Platform

Buckets for Wheel Loaders Esco now offers a competitive line of general purpose (GP) buckets for wheel loaders. The offering ranges from 2.0 to 9.0 cu. yd. (1.5 to 6.9 cu m) capacities for WL20 to WL80 class wheel loaders. The buckets feature curved side reinforcement plates to reduce spillage and AR400 wear protection in

high wear areas. All Esco general purpose loader buckets come standard with a spill guard, bolt-on skid shoes, replaceable bolt-on edge, and are available with direct-pin or quick coupler connections. Esco GP buckets are precision manufactured with premium materials for long, reliable service, reducing maintenance requirements for greater site safety. The bucket was developed to provide more production with lower fuel consumption than conventional loader bucket designs. For more information, visit www.escocorp.com.

The Skid-Lift scissor lift attachment is made specifically to mate with a skid steer. It utilizes the power and hydraulic functionality of the skid steer to position and operate the Skid-Lift. The Skid-Lift goes to a height of 20 ft. (6 m) to the bottom of the platform so working height (chest level) is 26 ft. (7.9 m). The lift features two attach points on the side and end of the unit. This allows for The Skid-Lift goes to a height of 20 ft. (6 m) to the great flexibility and makes getting bottom of the platform so working height (chest into awkward locations possible. level) is 26 ft. (7.9 m). The Skid-Lift also includes a side tilt feature for leveling the platform or hydraulic pumps. steerable axles, wheels, allowing the operator to get closer to the tires, electrical sensors, etc. This unit also improves ground clearance work area without reaching out over railings. Users feel secure in this unit compared to tra- and gives you the ability to go where ever ditional lifts as they are always tied directly your skid steer goes. It also has the ability to to the skid steer, according to the manufac- straddle ledges or curbs, something wheeled units just can’t do. turer. For more information, visit www.skidThis unit has no electrical or self contained hydraulics, which eliminates mainte- lift.com. (This story also can be found on nance issues associated with self powered lifts. Maintenance costs are reduced through Construction Equipment Guide’s website at the elimination of battery packs or engines, www.constructionequipmentguide.com.)

Page 56 • May 14, 2017 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com

Maximize Production with ESCO

6715 W. Reno Oklahoma City, OK 73137 800/375-3339 Fax: 405/787-5973 12321 E. Pine St. Tulsa, OK 74116 800/375-3733 Fax: 918/437-7065 12035 Interstate 20 W Abilene, TX 79601 877/577-5729 3922 I-40 East Amarillo, TX 79103 800/283-1247 8505 So Central Expwy Dallas, TX 75241 800/753-1247 1450 NE Loop 820 Fort Worth, TX 76106 877/851-9977

The Ultralok Tooth System offers a hammerless lock that is integrated into the point - coupled with ESCO excavator buckets, it maximizes penetration, reduces fuel costs, and increases productivity.

3201 E Slaton Hwy. Lubbock, TX 79404 866/289-6087 7301 East I-20 Odessa, TX 877/794-1800 432/333-7000

Tungsten carbide tips hammers SUPER MONO PROTECTTM - the best tool for o for o est recultivation with big and hard stones

Looking fo or professional al MULCHERS and CRUSHERS? S? Yo ou are right here! FORESTRY MULCHER S :: STUM MP GRINDER S :: STONE CRUSHER S

Watch it run! www.youtube..com/seppimulcher s Call Ben: 763-2238-6584 or Call Craig: 513-265-7 3 504

71 -13 1 8 m 0-6 pi.co 8 p : e l Cal sa@s com u pi.

ep w.s w w

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 57

ROMCO EQUIPMENT CO. www.romco.com Austin, TX • (512) 388-2529 • (877) 851-1026 Buffalo, TX • (903) 322-5602 Carmine, TX • (979) 278-3570 Dallas, TX • (214) 819-4100 • (800) 227-6626 Ft. Worth, TX • (817) 626-2288 (866) 966-4602 Houston, TX • (713) 937-3005 (800) 865-6998 Longview, TX • (903) 758-5576 Rio Grande Valley, TX • (956) 565-0100 San Antonio, TX • (210) 648-4600 (800) 966-4601

HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave., Commerce City, CO (303) 287-7506 • (800) 646-6636 Durango, CO • (970) 247-4460 Grand Junction, CO • (970) 243-7090 Ogden, UT • (801) 627-0049 Salt Lake City, UT • (801) 262-7441 St. George, UT • (435) 652-8003 Casper, WY • (307) 266-4474

From the moment you first experience the efficiency, reliability and durability of a Hitachi excavator, you too will become Hitachi To The Core. These machines can help take productivity to the next level and boost your bottom line. So operators can do what they say.

Gillette, WY • (307) 685-4288 Rock Springs, WY • (307) 382-5284 Idaho Falls, ID • (208) 523-9915

HitachiConstruction.com

Page 58 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Site Clean Up, Removal Part of Plan for Old Sawmill District Development DEVELOPMENT from page 44

ready for an urban, multi-use, residential and commercial neighborhood. Cleaning up the district was made possible through the Voluntary Cleanup Plan, or VCP. The plan, developed in coordination with the Montana Department of Environmental Quality, called for the removal and disposal of the site’s contaminated soils. “Work under that plan has been completed and the mill site is ready for its long-awaited renewal,” Stanhope said. Nearly all of the materials that had to be removed from the mill site have been salvaged for other uses, most of which will be reused on the mill site. About 15,000 tons of wood waste has been removed from the site and will be composted and reused in city parks. Old concrete foundations were dug out and crushed, then used to fill excavated log ponds along with other fill material from the site. Abandoned buildings were deconstructed and materials used to build shelters in Silver Park. Positive Impact on Missoula Area “The project is causing surrounding property values to increase,” Stanhope said. “This site had been abandoned for about 25 years. Homeless camps had sprung up in the old abandoned buildings. With the new development, this has once again become a safe, vibrant area in the center of Missoula.” Also traffic calming devices were integrated into the plans. The development has opened up a new east-west arterial in the city of Missoula that has helped take pressure off of other major roads. No roads were closed because of the project. Old Mill District will be the first urban mixed-use development in Montana. “The residential and commercial building are all class A projects with a level of building styles and finishes not seen in the multi-family housing industry in Montana on this scale,” Stanhope said. She added that the 700 residential units and 150,000 sq. ft. of commercial space will provide a boost to the local economy. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

KOMATSU EQUIPMENT COMPANY www.komatsueq.com 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557 3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 1409 East 3850 South St. George, UT 84790 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300

Old Sawmill District photo

Polleys Square will stand three- and four-stories tall. Cambium Place is a four-story building.

www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681 Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 800-989-7121 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540

ROAD MACHINERY

Old Sawmill District photo

Nearly all of the materials that had to be removed from the mill site have been salvaged for other uses, most of which will be reused on the mill site. Old Sawmill District photo

www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383

KOMATSU SOUTHWEST

901 Troy King Road Farmington, NM 87401 505-324-8601

4520 National Park Hwy Carlsbad, NM 88220 575-628-8301

The name, Old Sawmill District, draws on a lumber mill that once operated there.

1181 Burgundy Drive El Paso, TX 79907 915-872-1001

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 59

KIRBY-SMITH MACHINERY INC. www.kirby-smith.com 6715 W Reno Avenue Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000

POWER MOTIVE CORPORATION www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188 Durango, CO 970-259-0455 Cheyenne, WY 307-634-5149

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 S. Main Street Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-7150

Page 60 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AGC Reports Employment Up in 39 States Over Last Year Thirty-nine states added construction jobs between March 2016 and March 2017 while 17 states added construction jobs between February and March, according to an analysis by the Associated General Contractors of America of Labor Department data. Association officials noted that contractors in most states remain busy for now but worry about not being able to find enough workers to complete projects in the future. “Construction job gains were much less widespread in March after unseasonably mild weather boosted hiring in more states than usual in February,” said Ken Simonson, chief economist of the association. “Only Massachusetts and Texas set new records for construction employment in March, following a month in which construction employment reached all-time highs in five states.” California added the most construction jobs (42,200 jobs, 5.5 percent) during the past year. Other states adding a high number of new construction jobs for the past 12 months include Florida (36,500 jobs, 7.9 percent); Texas (18,900 jobs, 2.7 percent); and Washington (12,200 jobs, 6.7 percent). Oregon added the highest percentage of new construction jobs during the past year (9.2 percent, 8,200 jobs), followed by Nevada (8.3 percent, 6,200 jobs), Rhode Island (8.2

percent, 1,500 jobs) and Florida. Ten states and the District of Columbia shed construction jobs between March 2016 and March 2017. Employment was unchanged in Montana. Illinois lost the highest number of construction jobs (minus 4,900 jobs, minus 2.2 percent), followed by Mississippi (minus 4,800 jobs, minus 10.4 percent) and Iowa (minus 2,000 jobs, minus 2.4 percent). Mississippi lost the highest percentage for the year, followed by D.C. (minus 9.3 percent, minus 1,500 jobs) and Alaska (minus 6.6 percent, minus 1,100 jobs). California added the most construction jobs between February and March (18,900 jobs, 2.4 percent). Other states adding a high number of construction jobs include Georgia (4,700 jobs, 2.6 percent); Texas (4,000 jobs, 0.6 percent); Virginia (2,100 jobs, 1.1 percent) and Florida (1,900 jobs, 0.4 percent). New Mexico added the highest percentage of construction jobs during the past month (3.4 percent, 1,500 jobs), followed by Georgia; California; Maine (2.0 percent, 600 jobs) and Nevada. Construction employment declined in 30

states and D.C. during the past month and was unchanged in Montana, North Dakota and Wisconsin. Illinois shed more construc-

February and March (minus 4.9 percent, minus 800 jobs); followed by Louisiana and Missouri (minus 2.9 percent, minus 3,600 jobs). Association officials said that more contractors are quoting longer completion times or passing up opportunities to bid on new projects as ways of coping with shortages of available qualified workers. The association urged federal, state and local officials to act promptly on measures outlined in the association’s Workforce Development plan to open up more career and technical education opportunities, especially for high school students. “More high school students should know that construction offers Ken Simonson above-average starting pay, steady Associated General Contractors of America work and good career advancement,” said Stephen E. Sandherr, the association’s chief executive officer. “Increasingly, workers get to use cuttion jobs than any other state (minus 7,100 ting-edge technology such as drones, virtualjobs, minus 3.2 percent), followed by or mixed-reality devices and GPS- or laserLouisiana (minus 6,700 jobs, minus 4.4 per- guided tools.” cent); and Maryland (minus 4,500 jobs, (This story also can be found on minus 2.7 percent). Alaska lost the highest Construction Equipment Guide’s website at percentage of construction jobs between www.constructionequipmentguide.com.)

“Construction job gains were much less widespread in March after unseasonably mild weather boosted hiring in more states than usual in February.”

AEM Lauds Firms for Data Reporting Fewer Regulations The Association of Equipment Manufacturers (AEM) has presented Statistics Outstanding Merit Awards to 36 companies for their exemplary performance in AEM data reporting programs. The awards recognize member companies for timely and accurate data submission, meeting attendance and timely response to ballots, audits and surveys during the 2016 calendar year. “These winners enhance our ability to provide meaningful equipment-specific market trend and benchmarking data to assist members’ business planning,” said Rex Sprietsma, AEM director, statistics and market information. AEM statistics activities encompass more than 200 unique product programs covering information from county-level retail sales data in North America to shipments data on a global basis. Winning companies have received a cumulative performance rating of 90 percent or better based on corporatewide performance. AEM presented the awards during its recent spring statistics conference in Fort Lauderdale, Fla. The annual con-

ference featured a general session, in addition to the meetings of several AEM statistical committees, where members review product programs’ reporting requirements, and vote on member proposals, all of which help ensure the association statistics provide members with optimum value. AEM recognized the following 36 companies as 2016 “Statistics Outstanding Merit Award” winners: * Indicates a 100-percent score • AGCO Corporation * • Alamo Group Inc. • Allen Engineering Corporation • Altec Industries Inc. • Amerequip Corporation • Caterpillar Inc. * • Charles Machine Works • CNH Industrial • Deere & Company * • Haulotte Group BilJax • Hyundai Construction Equipment Americas Inc. • INDECO North America Inc. • JLG Industries Inc. * • KCM Corporation • Kobelco Construction Machinery USA • Komatsu America Corp.*

• Krone NA Inc. • Kuhn North America Inc. • Lemken Canada Inc. • Link-Belt Construction Equipment Company • MacDon Industries Ltd • Manitex International • Manitowoc Cranes Inc. • Sellick Equipment Limited • Skyjack • Sullair LLC • Superior Industries • Tadano America Corporation • Takeuchi • Thompson Pump & Manufacturing Inc. • Tigercat Industries Inc. • The Toro Company • Vac-Con Inc. • Vermeer Corporation • Volvo Construction Equipment North America LLC • Wirtgen America Inc. For more information, visit www.aem.org in the Market Data/Statistics section.

Support Coal Industry Growth COAL from page 16

ultimately result in an alternative use for coal, which would not necessarily burn it,” said Ramaco CEO Randall Atkins. The first alternative product the company research team will focus on is coal-derived carbon fiber for use in construction of lightweight cars. A new mine also is opening in Pennsylvania, but for a different reason. Corsa Coal Corporation’s new mine will produce 400,000 tons of metallurgic coal. That is, its production will go to the manufacturing of steel, whereas 95 percent of coal mined in the United States is thermal coal, which is burned for energy. This is the point: Corsa is opening the mine to take advantage of the Trump administration’s declared intent to increase infrastructure projects, which means an increase in steel production for bridge components and rebar. Coal mining seems to have a future. Just what that future is isn’t exactly clear. As Murray predicts, tens of thousands (This story also can be found on of coal workers may report back for work in the next few Construction Equipment Guide’s web- years, but surely not all of them. site at www.constructionequipmentguide.com.)

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Paving

SECTION

Pages 61-71

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Wirtgen Small Milling Machines Operate Uniformly The new generation of Wirtgen small milling machines — with the W 35 Ri as the smallest member, the 20-in. (50 cm) W 50 Ri and W 60 Ri, and the 3 ft. 3 in. (1.0 m) W 100 Ri and W 120 Ri machines — have a uniform operating concept centered on the ergonomically designed multifunctional armrest. With it, the operator can call up all the important information he needs to see on the color display, including the acquisition and visualization of all job data. Four “favorites” buttons integrated in the armrest can be programmed with any of 20 different functions. The operator also can intuitively control the height of the machine from the multifunctional armrest. Innovative Control Concept: Optimum Workflows A variety of additional automated functions result in significantly faster workflows. For example, the Level Pro Plus leveling feature has been fully integrated into the machine control system. Fewer interfaces mean shorter signal paths in the controller systems, faster reactions between them, and an efficient and precise leveling process. Automated height adjustment of the crawler units also supports the leveling and milling process. For example, the machine operator can activate the automatic lowering function to precisely position the machine in a milled cut. When the milling drum assembly reaches the surface which is to be milled, the lowering speed is reduced, and the milling drum slowly penetrates the material down to the set depth. The height of the crawler units also can be adjusted in steps of 0.04 in. (1 mm) or 0.2 in. (5 mm) increments using a new millimeter height function to precisely set the milling depth. The most frequently used height settings are automatically stored in three height-adjustment memories, and called up quickly at any time at the press of a button. Automated milling functions promote maximum efficiency for the milling process. For instance, a load limiting controller integrated in the machine control system keeps the machine within an optimum performance range at all times. An anti-stall system prevents the engine from shutting off in the event of sudden overloads by automatically releasing the clutch in a fraction of a second. And the amount of water required to cool the cutting tools and control dust also is reg-

The RAP loading systems on the Wirtgen W 50 Ri has been enhanced for maximum performance and functionality. A large swivel angle, practical quick release coupling and hydraulic collapsible belt simplify workflows tremendously.

ulated automatically as a function of the engine load, in order to enable long productive periods while reducing water consumption. New Generation of Small Milling Machines Boasts Practical Solutions Wirtgen also sets standards with its solutions for milling and material transfer for small mills. One example is the hydraulic function for collapsing the discharge conveyor on the W 50 Ri, which can measure as much as 18 ft. 4 in. (5.60 m) long and 14 in. (35 cm) wide. This function helps to quickly adapt the conveyor for use on confined job sites or prepare it for transport. Assembly and disassembly of the discharge conveyor is greatly facilitated by the compact quick-change coupling for the hydraulic connections. For driving and steering, Wirtgen's small milling machines have a very generous steering angle to both sides, resulting in extremely small turning radii that make working on confined job sites much easier. The automatic tracking function of the right rear wheel on the W 50 Ri when folded in additionally increases maneuverability, according to the manufacturer. For more information, visit www.wirtgengroup.com/america. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Wirtgen’s class of small milling machines integrates the uniform operating concept. Now an operator can, for instance, store up to three standard milling depths for each side using the ergonomic multifunctional armrest.

Page 62 • May 14, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Terex Bid-Well Partners With Terex Materials Processing Now part of the Terex Materials Processing Systems (Terex MPS), Terex Bid-Well announced a strategic alliance with Terex MPS sales and support to grow its equipment sales and service beyond the U.S. market. The concrete paving equipment manufacturer will leverage synergies with the Terex MPS sales and certain distributor locations to significantly expand Terex Bid-Well’s global customer sales and support capabilities. “We are excited to work with the Terex MPS sales and distribution network, so we can offer a deeper level of customer sales and service for our versatile concrete paver design,” said Christal Dietzenbach, site director of Terex Bid-Well. “The experienced Terex MPS team already sells equipment that produces the material used to make the concrete paved by our equipment. We see many advantages for our customers by striking this relationship.” The partnership includes the full line of Terex Bid-Well concrete paving and placing equipment used for paving flatwork, overlays, parking lots, city streets, bridge decks, highways, airports, slopes and canals. Terex MPS representatives have completed extensive factory training covering the equipment’s design, features, capabilities and significant advantages. These representatives will work directly with paving contractors and Terex Bid-Well technicians to help customers select the right equipment to efficiently fit their needs. “Customers in many global markets can benefit from the quality increases and efficiency gains offered by the flexible Terex BidWell paver design. Contractors manually hand-pouring flatwork and bridge deck projects can substantially improve ride smoothness while significantly reducing labor costs and time requirements by using Terex Bid-Well pavers,” Simon Croker, global product line director, Terex MPS said. “Additionally, our paver can complete many applications historically paved by concrete slipform pavers, but at a fraction of the acquisition cost to lower long-term operating costs. Plus the Terex Bid-Well paver offers on-the-fly paving-width changes, which slip-

The partnership includes the full line of Terex Bid-Well concrete paving and placing equipment used for paving flatwork, overlays, parking lots, city streets, bridge decks, highways, airports, slopes and canals.

form pavers do not.” Inventor, Innovator of Flexible Concrete Paving Equipment More than 55 years ago, Terex Bid-Well invented the transverse bridge deck paver design that included an oscillating strike-off pan riding along a 48-in (1219mm) deep truss frame. As bridge designs evolved over the years, so too did the paver design. The floating strike-off pan was replaced by a single and then double roller strike-off configuration. Terex BidWell also developed the patented Rota-Vibe system to improve concrete density and uniformity of consolidation. The Terex paving equipment offering includes the Terex BidWell 2450, 3600 and 4800 pavers. Configurable with a range of options so virtually any bridge deck design can be paved fullwidth, the paver’s carriage can be

equipped with an internal vibration system so the machine can pave flatwork applications such as parking lots, city streets and county highways. The 2450 paver offers standard paving widths from 9 to 56 ft. (2.4 to 17.1 m), while the 3600 can pave standard widths reaching 96 ft. (26.2 m). The flagship 4800 paver features standard variable paving widths from 9 to 116 ft. (2.4 to 35.4 m), while available transition inserts increase truss depth at the center to allow for paving widths to expand up to 190 ft. (54.9 m). At a significantly lower purchase price than slipform pavers, the Terex Bid-Well 5000 and 6000 airport and highway pavers are built with the weight and frame rigidity to deliver high-production flatwork paving. Pin-connected frame inserts offer fast paving width changes from 12 to 68 ft. (3.6 to 20.7 m), increasing paver uptime for more paving days in a

season. Featuring leg end segments that offer on-the-fly, variable-width paving, the 5000 and 6500 pavers deliver cost-efficient paving of flared, parabolic and radius slabs up to 24 in. (61 cm) deep, according to the manufacturer. The flexible frame design of the Terex Bid-Well 7000 pavers allow for paving full- and half-width trapezoidal canals and straight slopes reaching 45 degrees. With a base machine length of 30 ft. (9.1 m), the pavers can be quickly expanded to meet up to 84-ft. (25.6 m) paving widths. The power console and power unit on the paving carriage tilt to remain level during operation. All Terex Bid-Well pavers feature a robust paving carriage that includes the Rota-Vibe system. This exclusive Terex Bid-Well feature imparts up to 5,000 vpm (83.3 Hz) over the roller’s entire length to consolidate the top 2.5 in. (6.3

cm) of concrete, delivering a denser and more uniformly consolidated concrete surface, according to the manufacturer. The Terex Bid-Well product offering also includes standard, heavy-duty and super heavy-duty workbridge models that follow the paver to bridge fresh concrete, allowing workers to finish the surface. Fully adjustable features on Terex Bid-Well texturing/curing machines perform both longitudinal and transverse texturing/curing as well as transverse texturing and longitudinal curing. The Terex Bid-Well CP240 Placer distributes concrete ahead of the paver at maximum widths reaching 60 ft. (18.3 m) and variable speeds of up to 700 fpm (213 mpm). For more information, visit www.terex.com/construction.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • May 14, 2017 • Page 63

AUTHENTIC. PROVEN. REFINED.

THE ORIGINAL IS STILL THE BEST The Roadtec “Shutttle Buggy” material transfer fer vehicle (MTV) provides un nequaled perfor formance to other o MTVs and is require ed extensively by government road departments worrldwide to achieve consistently high quality asphallt pavement. Pavement life fespan tests have shown thatt a temperature differential of less than seven deg grees Celsius in the mat behind the paver is key to eve en compaction and paveme ent durability. WITH H SHUTTLE BUGGY

Infrared imaging behind the Shuttle Buggy Buggy™ MTV M in tests conducted in the U.S. U S as well as in Europe e has shown that the machine easily and consistenttly remixes to achieve temp perature differential below the seven degree Celsius threshold. This proven per p formance has led not on nly to the machine’s populaarity all over the world, butt also allows contractors to earn maximum smoothnesss bonuses and win qualityy awards, while improving prroduction. WITHOUT SHUTTLE BUGGY

ACHIEVE YOU R BEST QUALITY TO ODA AY - VISIT ROADT EC.COM

1 800 272 7100 1.800.272.

+1 423 265 0600 +1.423.265.0600

Page 64 • May 14, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Introducing 12 tons of stress relief

BOMAG introduces the new standard for affordable, user-friendly 12-ton soil compactors. The new BW211-40 series is loaded with ergonomic features to reduce operator fatigue. Plus it delivers over 53,000 lbs. of centrifugal force (nearly 62,000 lbs. for pad foot roller) over its massive 84-in working width. Other benefits include: •Redesigned, vibration-isolated operator’s platform with easy to use controls and improved sight lines •Shorter stop to stop steering input for less fatigue, 12-degree oscillation and 35-degree steering angle for optimum maneuverability •Easy open, no tool hood for better engine access •EPA-compliant Tier 3 diesel engines For detailed specs and full list of features and benefits on BOMAG 40-series rollers, visit

www.bomag-americas.com

THE COMPACTION EXPERTS

ASMUSSEN EQUIPMENT COMANY www.raseq.com

www.power-equip.com 500 E. 62nd Ave. Denver, CO 80216 303-288-6801 Fax: 303-288-6809

2940 E. Las Vegas St. Colorado Springs, CO 80906 719-392-1155 Fax: 719-390-9604

100 Barr Ave. SE Albuquerque, NM 87105 505-344-9466 Fax: 505-345-4715

2329 River Road Grand Junction, CO 81505 970-243-0722 Fax: 970-243-0726

8806 E. US Hwy. 34 Johnstown, CO 80534 970-669-6209 Fax: 970-669-6280

3251 MJB Road Casper, WY 82601 307-577-9700 Fax: 307-577-9703

3333 W. 2100 S. Salt Lake City, UT 84119 801-972-5588 Fax: 801-972-2215

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • May 14, 2017 • Page 65

Golden Equipment Company www.goldenequipment.com 721 Candelaria Rd NE Albuquerque, NM 87107 (505) 345-7811

1150 Madison Lane Farmington, NM 87401 (505) 326-1413

29268 Hwy 160 Durango, CO 81303 (970) 247-8830

Page 66 • May 14, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Atlas Copco Introduces Its Generation VI Asphalt Rollers The Atlas Copco CC4200VI, CC5200VI and CC6200VI articulated tandem rollers feature LED lights and temperature sensors on the front and rear rollers so operators can better manage temperature drop while compacting.

Atlas Copco has introduced its Generation VI rollers — the CC4200VI, CC5200VI and CC6200VI. The new articulated tandem rollers feature temperature sensors on the front and rear rollers so operators can better manage temperature drop while compacting. Atlas Copco also offers the units with a 3year package to its telematics system, FleetLink Advanced. The system allows users to optimize fleet usage, reduce maintenance costs and save time and money The Dynapac CC4200VI, CC5200VI and CC6200VI feature Tier IV engines and are available with Atlas Copco’s optional ECO Mode system. ECO Mode is an rpm-management system that delivers to the rollers only the amount of power that is necessary to operate at any given time. This system can reduce fuel consumption by as much as 20 percent, according to the manufacturer. Atlas Copco has redesigned the big double drum rollers for generation VI with long lasting LED lights to enhance the rollers’ simple maintenance, and service points that are fast and easy to access. This includes positioning the engine on the rear module and incorporating large, easy to-open engine hoods. Servicing information displays directly on the driver’s 7-in. LCD touch screen and also indicates what servicing needs to be completed. All rollers feature a lubrication-free steering hitch and steering cylinder. The units’ FleetLink Advanced system records the location of the equipment and working hours while allowing users to monitor each machine’s parameters and performance every minute. It also includes a tool to

set one or more geo-fences for a single machine or a group of machines. The FleetLink package includes a hardware module, access to an online fleet management portal, and a monthly connection package subscription, which customers can extend after the three years. The double drum rollers also feature a corrosion-free water tank and sprinkler tubes, in combination with easily accessible filters for enhanced reliability and easy maintenance. Contractors can replace hydraulic hoses in individual segments, saving from the hassle and costs associated with replacing full lengths of the hoses. The rollers enhance productivity by maximizing operator visibility and comfort. They feature a sideways-sliding seat and steering module that also rotate with the operator, which helps improve visibility for optimal control and compaction. And since the engine is located at the back of the roller there is less heat and noise affecting the operator. The Dynapac CC4200VI is available with a Combi module placed at the rear of the unit and offset steering to further improve top layer texture. The Atlas Copco Dynapac CC4200VI, CC5200VI and CC6200VI are built with parts similar to other Atlas Copco equipment. This means less inventory for dealers and parts that are readily available for fast turnaround times and less downtime. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • May 14, 2017 • Page 67

A WIRTGEN GROUP COMPANY

Brand New Highway Class Paver SUPER 2000-3i.

CLOSE TO OUR CUSTOMERS TECHNICAL HIGHLIGHTS > High-performance paver for use in highway

> Ergo Plus 3 for easy paver operation > Daily maintenance-free paver with large fuel tank

construction and large-scale commercial applications

for a day’s work or more

> Multiple screed options including front or rear extensions or a high-compaction screed for placing stiff mixes and base materials

www.wirtgen-group.com/america

WIRTGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · Telephone: 615-501-0600 KIRBY-SMITH MACHINERY INC. www.kirby-smith.com

6715 W. Reno Oklahoma City, OK 800-375-3339 Tulsa, OK 918-438-1700 Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600

Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826 Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000

NUECES POWER EQUIPMENT www.nuecespower.com Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 Vinton, TX 915-541-0066 Houston, TX 713-247-0066

MODERN MACHINERY www.modernmachinery.com Spokane, WA 800-541-0754 Kent, WA 800-669-2425 Rochester, WA 800-304-4421 Portland, OR 800-950-7779 Eugene, OR 800-826-9811

Boise, ID 800-221-5211 Pocatello, ID 800-829-4450 Missoula, MT 800-332-1617 Kalispell, MT 800-434-4190 Billings, MT 800-735-2589

KOMATSU SOUTHWEST www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383 Farmington, NM 505-324-8601 Carlsbad, NM 575-628-8301 El Paso, TX 915-872-1001

HONNEN EQUIPMENT CO. www.honnen.com 5055 E. 72nd Ave. Commerce City, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441

Ogden, UT 801-627-0049 St. George, UT 435-652-8003 Casper, WY 307-266-4474 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

ROAD MACHINERY www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681

Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 661-824-2319

Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540

Page 68 • May 14, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years 1995 Etnyre S-2000 distributor, 2000 gallons, computer w/1 ft cut-offs, propane heat, 12 ft spray bar, Ford F800 w/Cummins 5.9L diesel engine, 5 spd, 2 spd

2007 Etnyre Quad chip spreader, 10-20 ft extending spread hopper, computerized w/individual gates, 4 wheel drive, Cummins 6.7L diesel engine 240 hp, folding rear hopper

2010 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, Cat C7 diesel engine, power crown, slope & height, spray down hose & reel, self lubing system, power auger tunnels, front wheel assist

2005 Broce CR350 broom, heat & a/c, 8 ft broom, Cat diesel engine, water system

New Marathon KERA10 walk behind crack sealer, 10 gallon material vat, full wrap around oil jacket, manual full sweep agitation, propane burner, heated 1" discharge valve

www.rdoequipment.com Leeboy L250S tack distributor, 250 gal, spray wand & 2005 Blaw Knox PF 3200 paver, Omni IIIA 10-18 ½ ft screed w/diesel heat, power crown and slope, Cummins hose, propane heat, Honda gas engine, flushing system, hose reel 5.9L diesel engine, power auger tunnels

Minnesota Brooklyn Park Bloomington Burnsville Mankato Marshall Moorhead Rochester Sauk Rapids

763-316-6162 952-948-1604 952-890-8880 507-387-1836 507-532-0994 701-526-2200 507-282-8888 320-259-6222

Montana 1997 Rosco SPRH chip spreader, 10 ft spread hopper, Cummins 5.9L diesel engine, manual transmission, manual controls

2011 Volvo DD16 double drum 39” vibratory roller, Kubota 3 cylinder diesel engine, double drum drive, water system

3517 Wayne White Rd., Climax, NC 27233

Billings Bozeman Great Falls Kalispell Missoula

406-259-5536 406-388-8353 406-452-8521 406-752-2828 406-549-4171

North Dakota Bismark Dickinson Grand Forks Minot Williston

701-223-5798 701-483-0115 701-772-4842 701-852-3962 701-577-0736

South Dakota Aberdeen Rapid City Sioux Falls

605-225-6716 605-348-1566 605-336-2730

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • May 14, 2017 • Page 69

RDO EQUIPMENT CO. www.rdoequipment.com Riverside, CA 800/494-4863

New Braunfels, TX 800/880-0880

Indio, CA 760/342-8900

Chandler, AZ 602/845-1800

Imperial, CA 800/464-4331

Ehrenberg, AZ 928/923-9611

Lakeside, CA 619/270-4300

Flagstaff, AZ 928/526-0639

Fort Worth, TX 800/551-4905

Phoenix, AZ 602/415-4700

Hewitt, TX 800/551-8258

Prescott, AZ 928/776-8300

Irving, TX 800/437-6342

Tucson, AZ 520/294-5262

Laredo, TX 956/718-1909

Wellton, AZ 928/785-4276

McKinney, TX 214/856-4899

Yuma, AZ 928/341-7100

Pflugerville, TX 512/272-4141

POWER MOTIVE CORP. www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 303/355-5900 Grand Junction, CO 970/241-1550 Colorado Springs, CO 719-576-5541

Milliken, CO 970/587-1188 Durango, CO 970/259-0455 Cheyenne, WY 307/634-5149

KOMATSU EQUIPMENT CO. www.komatsueq.com 1486 S. Distribution Drive Salt Lake City, UT 84104 801/972-3660 Fax: 801/954-0936 4460 Pioneer Way Elko, NV 89801 775/753-7557 3825 Losee Road North Las Vegas, NV 89030 702/399-1004

900 Marietta Way Sparks, NV 89431 775/356-1334 1409 East 3850 South St. George, UT 84790 435/986-1000 405 Jonah Drive Rock Springs, WY 82901 307/686-1300

www.sakaiamerica.com (800) 323-0535

Page 70 • May 14, 2017 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • May 14, 2017 • Page 71

BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729

C o m m i t t e d t o Q u a l i t y . C o m m i t t e d t o Yo u . Th roug h out th e w orld , th e L e e Boy b r a n d r epr es en t s qu a lit y a n d d epen d a b le e q uip me nt th at c ontinue s to m a xim iz e pr od u ct iv it y , d eliv er pr ofit a b ilit y a n d p rovid e assuranc nc e to our d e aler s a n d en d u s er s a lik e .

ROMCO EQUIPMENT CO. www.romco.com Austin 512/388-2529 877/851-1026 Buffalo 903/322-5602

A SPHALT PA PAVERS S

1000

5300

6150

7000 0

8500

8510 510

8 8515

8520

861 6

8816

Dallas, TX 214/819-4100 800/227-6626 Ft. Worth 817/626-2288 866/966-4602

FORCE FEED LOADER

MOTOR GRADERS S

ROLL ERS

Longview 903/758-5576 San Antonio 210/648-4600 800/966-4601

685

695

3000

TACK TANKS

400 0

420

MAINT TAINER

For more information, visit sit

www.LeeBoy.com Manufactured in the USA SA

150

250

500

1200 0

Page 72 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 10-11 DH Call McLaren 888-492-4230

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 10-11 DH Call McLaren 888-492-4230

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 10-11 DH Call McLaren 888-492-4230

Serving the Construction Industry Since 1989 Trench Shoring - Confined Space - Pipe Plugs Rentals - Sales - Service 10-11 PK 800-828-8505

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

CLASSIFIEDS

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states .............................................................Call

For more information, call Construction Equipment Guide today at

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us

800/523-2200

AERIAL LIFTS Platform Lifts

2004 JLG 600S, Stk #10674, 500 lbs., 60 ft, 4x4, 15 x 19.5 tires, 4 Cyl., Deitz Eng., 6,384 hours........................ $32,500.

9-10 TM

Wheel Loaders

Mini Excavators

Hendrix Machinery, LLC 936-327-5430

LOADERS Skid Steer Loaders

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 ®

Hendrix Machinery, LLC 936-327-5430

EXCAVATORS

2013 John Deere 17DX, Stk# 10686, 1,071 hours.. $19,500.

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

2014 CAT 259D, Stk# 10589, OROPS, 73'' Bucket, 12'' Rubber tracks, Aux Hyd, 4 Cyl Cat Engine 1,426 hrs $34,500.

2012 John Deere 310J, Stk #10677, EROPS, A/C, 4WD, 24'' Quick connect bucket, Extendahoe, Aux. Hyd, Pilot controls, 12 x 16.5 front, 19.5L x 24 rear tires, 3,551 hrs........ .................................. $39,500.

Hendrix Machinery, LLC 936-327-5430

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 10-11 EB

TRENCHING EQUIPMENT Trenchers Vermeer Model# V120 Rock Saw with wheel attachment (1,551 hours) Vermeer Model# RTX 1250 Rock Saw with wheel attachment (634 hours).............. Call 949-833-3222 Ext 108

DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?

$40

ONLY

Construction Equipment Guide is THE Place to List It!

2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

Call 800-523-2200

You must have a classified print ad to do so.

or go online to place your ad

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 73

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: JOHN DEERE 410 BACKHOE CASE 580 BACKHOE 1998 TO 2007 CONTACT: ROGER PH: 810-845-4540 EMAIL: RSTUDLEY@COMCAST.NET FAX: 810-845-4540 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER NEEDED USA LOCATION BULLDOZER KOMASTU 2014 AND UP 155 275 375. 475 ENV WITH RIPPER D10N D10R D10T D11N D11R D11T ENC ÇAB WITH RIPPER OR REPOSSES BANK OR LIEN CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL TD20C DOZER & INTERNATIONAL 250E LOADER RUNNING OR NOT, FOR PARTS! CONTACT: ALBERT HARLOW (PH: 267-738-5984) –––––––––––––––––––––––––––––––– WANTED: FORGING PRESSES LOOKING FOR FORGING PRESSES, 1350 TON, 1600 TON AND 2500 TO 4000 TON ALL MECHANICAL CONTACT: HERB KAISER (PH: 248-680-1000) EMAIL: HERB@GIBBSIND.COM –––––––––––––––––––––––––––––––– WANTED: 2 CATERPILLAR 740B ARTIC TRUCKS LATER MODEL, MAX 5000 HOURS, USA LOCATION CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR LATE MODEL BACKHOE ASAP IN TEXAS I'M LOOKING FOR 2000-2010 COMPLETE BACKHOE ASAP! PLEASE AUCTION PRICES ONLY. I'M A DEALER SO NO RETAIL, I'M LOOKING TO PURCHASE IN QTY IF THE PRICE IS RIGHT. LOOKING FOR UNITS IN THE TEXAS AREA IF POSSIBLE. I HAVE CASH TODAY!! NOTE: CAN BE IN WORKING OR NON WORKING CONDITION. CONTACT: MATTHEW (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 615 DIFF LOCK ASSEMBLY 615 PART #9V1761 FOR EVERYTHING, BOLTS TO SIDE OF CARRIER, RING PINION SHAPE DOES NOT MATTER CONTACT: DONNIE CHENEY (PH: 229-881-0751) EMAIL: DONNIECHENEY@YAHOO.COM FAX: 229-849-2191 –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 WANTED TO BUY HITACHI EX200, EX200-1, EX270, EX400 AND EX400-1. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 ––––––––––––––––––––––––––––––––

WANTED: CATERPILLAR 140G, 140H RUNNING OR NON-RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: RUNNING OR NON RUNNING MACHINES!!!! CAT WHEEL LOADER 936, 950, 950B, 950E, 950F, 966D, 966E, 966F AND 966G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM (PH: 713-855-6170) EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: 2002-2005 VERMEER HG 365 GRINDER PARTS UNIT I AM LOOKING FOR A 2002-2005 VERMEER HG 365 GRINDER UNIT FOR PARTS ONLY. I HAVE A COUPLE OF UNITS I'M LOOKING TO PUT TOGETHER. I'M A SERIOUS BUYER AND LOOKING TO ACT FAST. DOESN'T MATTER WHAT'S WRONG, DON'T CARE ABOUT THE HOURS. CONTACT: JAMES (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL 260A BACKHOE ANY CONDITION CONTACT: RUDY (PH: 732-921-1314) EMAIL: CRUTILITIES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: GP 7.5 CUBIC YARD BUCKET FOR CAT 980G/H/K WE ARE LOOKING FOR CAT 980G/H/K 7.5 CUBIC YARD GP BUCKET WITH BOE (BUCKET ONLY). OTHER MAKES OF THE SAME SIZE BUCKET ARE ACCEPTABLE. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. CONTACT: ROY FOLLICK (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: HYDRAULIC PUMP FOR 2700 Q LINK BELT CONTACT: TONY STEFFES PH: 414-651-7336 EMAIL: STEFFESANTHONY@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LINKBELT CRANES LINKBELT MODEL 48A OR LS68, LS78, LS 98, OR LS108. OPERATING OR PARTS MACHINES CONTACT: WILLIAM TAYLOR PH: 609-868-0326 EMAIL: TAYLORSCRANESERVICE@GMAIL.COM FAX: 856-468-5742 ––––––––––––––––––––––––––––––––

WANTED: FORD BACKHOE 455C I AM LOOKING FOR A TECHNICIAN FAMILIAR WITH THE ENTIRE ELECTRICAL SYSTEM OF A FORD BACKHOE 455C. THE MACHINE IS LOCATED IN CONSHOHOCKEN, 19428 CONTACT: JON NEVE PH: 610-828-9869 EMAIL: JAMESJNEVEINC@GMAIL.COM FAX: 610-828-0382 –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDING TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION, IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: HORIZONTAL DIRECTIONAL DRILLS I AM CURRENTLY LOOKING TO PURCHASE HDD UNITS ASAP! ANYWHERE IN THE U.S. CAN BE WORKING OR BROKEN. MUST HAVE LOW MILES AND RODS AND BASKET MUST BE IN PLACE. I WILL PAY FOR SHIPPING. MUST HAVE FULL SPECS AND PHOTOS READY. CONTACT: MATTHEW STEVENSON PH: 346-230-4485 EMAIL: MATT.TURBOWELDINGSVC@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: DRESSER TD 20 G W/EROPS DOZER WITH NO MORE THAN 5000 HRS. SEMI-I BLADE PREFERRED. CONTACT: RANDY MYERS PH: 785-948-2231 EMAIL: RANTAW@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BUCKETS FOR 322/325 CAT EXCAVATORS EXCAVATOR BUCKETS CAT 322/325 WITH 80MM PINS CONTACT: KEN PH: 330-219-1003 EMAIL: KRV8815@MSN.COM –––––––––––––––––––––––––––––––– WANTED: ATTACHMENTS INTERNATIONAL WANTED TO BUY ATTACHMENTS INTERNATIONAL SEVERE SERVICE DEMOLITION GRAPPLES FOR 46-62,000 WEIGHT EXCAVATOR. WOULD CONSIDER LABOUNTY. PHOTO AND PRICE PLEASE. CONTACT: AMIE PH: 218-863-6444 EMAIL: AMIE@ATTACHMENTSINTL.COM ––––––––––––––––––––––––––––––––

CASE (COMPLETE WITH ALL GEARS) FOR A 1989 GROVE AT-422 CRANE. SERIAL #69502, MODEL 4425 G CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 –––––––––––––––––––––––––––––––– WANTED: USED SWINGER 200/220 REAR AXLE USED SWINGER 200/220 REAR AXLE. DANA MODEL 60 OR 70 TRAC LOCK AXLE CONTACT: GERRY (PH: 218-863-6445) EMAIL: ATTINTL@LORETEL.NET –––––––––––––––––––––––––––––––– WANTED: BOBCAT 863 LOOKING FOR A LOW HOURS MACHINE, HYD STABILIZER A PLUS. CONTACT: WILLIAM TEETERS PH: 715-563-7162 EMAIL: BILLT_54726@YAHOO.COM WANTED: LARGE SAND OR MASS FAX: 715-563-7162 EXCAVATING BUCKETS –––––––––––––––––––––––––––––––– WANTED TO BUY LARGE SAND OR MASS EXCAVATING BUCKETS. PREFER WANTED: TRIAXLE ROAD TRACTOR DAY CAB ATTACHMENTS INTERNATIONAL OR TRIAXLE ROAD TRACTOR FOR HEAVY EMPIRE. MUST BE REBUILDABLE. HAUL 240-250INCH WHEELBASE DOUPHOTO AND PRICE PLEASE. BLE FRAME 500PLUS HP 18 SPEED CONTACT: SHANA DAY CAB 20K PUSHER NEWER NO PH: 218-863-6445 RUST EMAIL: CONTACT: JOE SHANA@ATTACHMENTSINTL.COM PH: 724-944-5569 –––––––––––––––––––––––––––––––– EMAIL: FJS-1@ATT.NET WANTED: EQUIPMENT MANUALS –––––––––––––––––––––––––––––––– BUYING NEW OR USED CONSTRUCWANTED: 785 SKID STEER LOADER, TION AND AGRICULTURE SERVICE, NEW HOLLAND PARTS AND OPERATOR MANUALS. EQUIPMENT DEALERS & PRIVATE COM- STOLEN FROM HARLAN MIDDLEPANIES, IF YOU HAVE MANUALS JUST BROOKS IN 2013 IN FLINTSTONE, GA. SERIAL NO. 820904. 1992 YR. HAD SITTING ON THE SHELF AND YOU NO CLAM BUCKET ON IT. REWARD FOR LONGER NEED THEM, PLEASE GIVE INFORMATION. MAY BE IN TN, GA, OR ME A CALL OR EMAIL. I BUY LARGE KY. PLEASE HELP. THANK YOU. AND SMALL LOTS. JOHN DEERE CAT, CONTACT: PAUL MIDDLEBROOKS KOMATSU, CASE, NEW HOLLAND, PH: 423-580-5078 VOLVO, DOOSAN AND SO ON. EMAIL: CONTACT: JOHN WHITNEY PAULMIDDLEBROOKS@YAHOO.COM PH: 530-864-0771 –––––––––––––––––––––––––––––––– EMAIL: WHITNEYJ65@YAHOO.COM WANTED: RADIATOR FOR A LINKBELT FAX: 530-864-0771 40 TON CRANE –––––––––––––––––––––––––––––––– NEEDED, RADIATOR FOR A 1980 40 WANTED: YANMAR MODEL 55R TON LINKBELT RT CRANE. MODEL # YANMAR MODEL 55R TRACK CARRIHSP8040 ER/DUMP -LOOKING FOR A MACHINE CONTACT: JAMES ARNETT JR FOR PARTS -CAN BE BURNT OR (PH: 937-277-8080) WRECKED. EMAIL: JARNETTJR@ORBITSDO.COM CONTACT: TIM LEWANDOWSKI FAX: 937-277-3951 (PH: 724-640-4396) –––––––––––––––––––––––––––––––– EMAIL: WANTED: TWIN 44 WASH PLANT, SAND LEWEQUIP.BRANDON@GMAIL.COM LOOKING TO BUY USED TWIN 44 WASH –––––––––––––––––––––––––––––––– WANTED: LATE MODEL TANDEM AXLE PLANT FOR SAND. PLEASE EMAIL ME PICTURES, DETAILS, PRICE AND LOCAMACK DUMP TION. CONTACT: CHRIS MCPHILLIPS CONTACT: MICHAEL BUHLER (PH: 610-8647529) PH: 814-637-5599 EMAIL: MCPHILLIPSCJ@AOL.COM EMAIL: NORTHSTARAGG@ FAX: 610-7893076 WINDSTREAM.NET –––––––––––––––––––––––––––––––– FAX: 814-637-5598 WANTED: JCB ROPS/FOPS –––––––––––––––––––––––––––––––– CONTACT: ROBT. WANTED: CATERPILAR MOTOR EMAIL: DEN_AYE@YAHOO.COM GRADER 140G FAX: 215-757-3665 LOOKING FOR USED CONSTRUCTION –––––––––––––––––––––––––––––––– EQUIPMENT IF YOU HAVE ANY OF WANTED: AT 422 GROVE CRANE THESE IN YOUR INVENTORY PLEASE TRANSMISSION CONTACT ME THROUGH EMAIL OR MY CONVERTER AND TRANSMISSION

PERSONAL CELL NUMBER. BELOW IS MY REQUIRED MACHINERY LIST. WHEEL LOADER (CATERPILLAR), ROLLERS (DYNAPAC), MOTOR GRADERS (CATERPILLAR), EXCAVATORS (HITACHI). MODEL1. 930 2. 950B 3. 950E 4. 966F 5. 966F(II) 1. CA301 2. CA251 3. CA262 4. CA602 5. CA362 CONTACT: ILYAS KHAN PH: +923322489350 EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CASE 1150C DOZER 34X6 PYRAMID SHOES NEED 2 SOME CALL THEM ATEX SHOES. CONTACT: DAVID RESTER PH: 901-490-8888 EMAIL: HIGHFLYR@BELLSOUTH.NET FAX: 731-635-3366 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE EXCAVATOR & LOADER I HAVE AN IMMEDIATE NEED FOR AN EXCAVATOR AND POSSIBLY A LOADER IF THE PACKAGE IS PRICED RIGHT. PLEASE ONLY OFFER MACHINES THAT FIT REQUIREMENTS. COULD BE ANY OF THESE MODELS ZERO TAIL OR TRADITIONAL WITH THE FOLLOWING OPTIONS: DEERE 225D OR 245G, 240D OR 250G, 270D OR 290G. UNDER 3500 HRS, LONG STICK, HYD THUMB, HYD COUPLER, BEST PRICE. DEERE 644K OR 724K. UNDER 4000 HRS, HYD COUPLER, RIDE CONTROL, BEST PRICE. PERFER WESTERN OR MIDWEST US FREIGHT LOCATION. CONTACT: CALEB COLBORN PH: 208-757-3564 EMAIL: CALEB@DOUBLEEDGE EQUIPMENT.COM FAX: 208-403-0363 –––––––––––––––––––––––––––––––– WANTED: KOMATSU EXCAVATOR PC300-5 & PC300-6 WANTED TO BUY KOMATSU EXCAVATOR PC300-6 CONTACT: ABDAL PH: 415-687-0337 EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT 950B AND 950E I AM LOOKING FOR 950 B AND 950E CONTACT: ALI PH: 206-802-5306 EMAIL: PIGL_PK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: USED 12G MOTOR GRADER WITH RIPPER WANTED TO BUY CAT 12G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM PH: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: GRAPPLE TELEX TXC340 2 INTO 3 TINE GENERAL PURPOSE GRAPPLE FOR TEREX TXC340 CONTACT: BRYAN WICKSON PH: 603-548-2037 EMAIL: BTWICKSON@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 74 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

• Dallas, TX Tues., May 16, 2017 For: Rentals! Construction Equipment & more

• St. John’s, NL, CAN May 16, 2017

• San Angelo, TX Thurs., May 18, 2017 For: Late Model Rental Returns • Syracuse, NY Sat., May 20, 2017 For: Complete Liquidation Construction Equipment

• Williston, ND May 16, 2017

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• Fort Worth, TX May 17 - 18, 2017

• ONLINE ONLY Thurs., June 8, 2017

July 19 - 20, 2017 For: Huge 2-Day Public Auction

• Pittsburgh, PA May 18, 2017

• ONLINE ONLY Thurs., June 15, 2017

• Lethbridge, AB May 18, 2017

• ONLINE ONLY Thurs., June 22, 2017

• Philadelphia, MS September 12 - 13, 2017 For: Huge 2-Day Public Auction

• Canastota, NY Sun., May 21, 2017 For: Annual Landscape/Lawn & Garden Equipment

• Los Angeles, CA May 19, 2017

• ONLINE ONLY Thurs., June 29, 2017

• Chehalis, WA May 23, 2017

• ONLINE ONLY Thurs., July 6, 2017

• Kissimmee, FL Mon., May 22, 2017 ForLate Model Rental Fleet Construction Equipment & more

• Orlando, FL May 23, 2017

• ONLINE ONLY Thurs., July 13, 2017

• Long Island, NY Sat., May 27, 2017 For: Rental Fleet Auction

• Tipton, CA May 25, 2017 • Downtown Columbus, OH May 25, 2017

• Richmond, VA Wed., May 31, 2017 For: Liquidation. Crane, Construction Equipment & more

• Chicago, IL May 26, 2017

• Buffalo, NY Sat., June 3, 2017 For: Job Completion, Construction Equipment & more

• Denver, CO June 1, 2017

• Lexington, KY Wed., June 7, 2017 For: Liquidation. Crane, Construction Equipment & more • Cleveland, OH Thurs., June 8, 2017 For: Complete Liquidation Ag & Construction Equipment • Parkersburg, WV Fri., June 9, 2017 For: Rental Return & Job Completion • Parkersburg, WV Sat., June 10, 2017 For: Classic Cars • Las Vegas, NV Sat., June 17, 2017 For: Very Large Rental Fleet Auction • Houston, TX Tues., June 20, 2017 For: Rental Fleet Construction Equipment & more • Atlantic City, NJ Sat., June 24, 2017 For: Very Late Model Rental Returns • Queretaro, Mexico Fri., June 30, 2017 For: Late Model Earthmoving Equipment & more • Detroit, MI Sat., July 8, 2017 For: Retirement Auction • Syracuse, NY Sat., July 15, 2017 For: Very Large Late Model Cat Rental Returns • Rutland, VT Sat., July 29, 2017 For: Complete Liquidation Retirement Auction

• Lexington, KY May 31, 2017

• Atlanta, GA June 13, 2017 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Portland, OR Fri., May 26, 2017 For: Monthly Public Auction • Sacramento, CA Sat, June 10, 2017 For: Monthly Public Auction • Riverside, CA Sat, June 17, 2017 For: Monthly Public Auction • Portland, OR Fri., June 30, 2017 For: Monthly Public Auction • Sacramento, CA Sat., July 8, 2017 For: Monthly Public Auction BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Midland, TX Fri., May 19, 2017 For: Construction Equipment • Dallas (Anna), TX Fri., June 9, 2017 For: Construction Equipment BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY Thurs., May 18, 2017 • ONLINE ONLY Thurs., May 25, 2017 • ONLINE ONLY Thurs., June 1, 2017

BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY May 17, 2017 • ONLINE ONLY May 24, 2017 • ONLINE ONLY May 31, 2017 • ONLINE ONLY June 7, 2017 • ONLINE ONLY June 14, 2017 • ONLINE ONLY June 21, 2017 COMMOMWEALTH OF PA www.auctionsbygov.com 866-469-7383 • Harrisburg, PA Tues., June 6, 2017 For: Spring Heavy Equipment Auction DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670 • Harrison, MI Thurs., May 18, 2017 For: Annual Spring Contractors Auction DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., June 24, 2017 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540

• Philadelphia, MS May 24 - 25, 2017 For: Huge 2-Day Public Auction • Philadelphia, MS

• Philadelphia, MS November 15 - 16, 2017 For: Huge 2-Day Public Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 16, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., August 18, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., October 20, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., December 8, 2017 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY May 31, 2017 • ONLINE ONLY June 14, 2017 • ONLINE ONLY June 28, 2017 • ONLINE ONLY July 12, 2017 • ONLINE ONLY July 26, 2017 • ONLINE ONLY August 9, 2017 • ONLINE ONLY August 30, 2017 • ONLINE ONLY September 13, 2017

• Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225 • Sebring, FL Sat., July 15, 2017 For: Construction & Agricultural • Sebring, FL Sat., September 9, 2017 For: Construction & Agricultural • Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Gary, IN Sat., June 10, 2017 For: Heavy & Construction Equipment & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Stanton, TX Wed., June 21, 2017 For: Permian Basin Absolute Public Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Princeton, WV Tues., May 23, 2017 For: Construction Equipment & more • Summerville, WV Tues., June 6, 2017 For: Fleet Reduction Auction • Pelzer, SC Thurs., June 22, 2017 For: Summer Contractors Auction McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Seven Valleys, PA Tues., June 13, 2017 For: Tractor, Farm & Construction Equipment

• Lewis Run, PA Thurs., June 1, 2017 For: Complete Liquidation Eastern Industrial

• Seven Valleys, PA Tues., July 11, 2017 For: Tractor, Farm & Construction Equipment

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Seven Valleys, PA Tues., August 8, 2017 For: Tractor, Farm & Construction Equipment

• Foley, MN Fri., June 9, 2017 For: Heavy Equipment, Truck & Trailer Auction

NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322

• Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction

• Wrentham, MA Sat., June 10, 2017 For: Major Heavy Equipment & Truck Sale

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., May 18, 2017 For: Truck & Trailer Auction • ONLINE ONLY Tues., May 23, 2017 For: Sharpe Rentals Inventory Reduction Auction • ONLINE ONLY Thurs., May 25, 2017 For: Construction Equipment • ONLINE ONLY Thurs., June 1, 2017 For: Truck & Trailer Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., June 10, 2017 For: Construction Equipment • ONLINE ONLY Sat., July 15, 2017 For: Construction Equipment • Lebanon, TN Sat., September 9, 2017 For: Construction Equipment SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • South Windsor, CT Sat., June 17, 2017 For: JDC Enterprises Liquidation Auction SHETRON AUCTIONS www.shetronequipment.com 717-532-8828 • Rockaway, NJ Fri., May 19, 2017 For: Crane Auction WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., June 10, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL Wed., May 24, 2017 For: Heavy Equipment Auction • Saugatuck, MI Wed., May 31, 2017 For: Heavy Equipment Auction • Atlanta, GA Thurs., June 8, 2017 For: Heavy Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 75

JAMES G. MURPHY H CO.

NO MINIM MUMS - NO RES R ERVES V

PU UBL LI LIC C A AUC UC CT CTIO ON 9 M-S 9AM 9A SATURD SA ATURD A TTURD URD DA DAY DA AY Y - JJU JUNE UNE U NE 10T 10TTH KENMO KENMO ORE RE HEA HE EA AVY A V EQU VY E EQUIPMENT QUIIPMENT PMENT, CLES CONTTRAC TRA AC CTTTO CTO ORS RS EQU EQU UIPMENT IPMENT & V VEH EHIICLES IC S 18 82 226 2 26 6 68T 8TTTH HA AV AVE. VE. V E. N NE, E, K KEN KENMORE, ENMORE, NMORE, WA WA

FOR MOR RE INFORMATIO ON GO TO MURP PHYAUCTION.C COM • PHONE 42 25-486-1246

Page 76 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 77

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Michigan Occupational Safety and Health Administration (MIOSHA) Coffee with MIOSHA MIOSHA invited employer and employees to share a cup of coffee and learn about the importance of workplace safety and health of Michigan workers. The Coffee with MIOSHA events will provide an informal opportunity for employers and employees to meet with MIOSHA representatives (Consultative, Enforcement & Radiation) and ask questions, obtain information on program services and resources, learn about MIOSHA Training Institute (MTI) opportunities, and establish rapport. Upcoming Dates & Locations: MAY 24, 2017 (GI & GS) American Society of Safety Engineers (ASSE) TBD Ann Arbor, MI JUNE 7, 2017 (GI) Michigan Safety Conference 333 W. Michigan Avenue Lansing, MI 48933 GI = General Industry Safety and Health focus CS = Construction Safety and Health focus Northeastern Forest Products Equipment Expo 2017 Show Start Date: 19 May 2017 Show End Date: 20 May 2017 Open To: Trade Visitors Location: Cross Insurance Center 515 Main Street Bangor, Maine 04401 Event Profile: Northeast Forest Products Equipment Expo 2017 is the premier logging, saw-milling and pallet equipment show. Northeastern Forest Products Equipment Expo 2017 to be held on 19-20 May 2017. The 2017 Expo features new exhibit space around the Cross Insurance Center, with a familiar layout of the parking area where the outside component of the Expo has traditionally been set up. This event showcases products from the Agriculture & Forestry Industry. The Show will exhibit forest products, wood, timber products, forestry service, lumber, plywood, panel and pallet manufacturing, treating, laminating, and processing machinery, processing equipment and supplies. Visitor Profile: Visitors such as manufacturers, suppliers, traders, distributors, retailers, key decision makers and much more. For more information on this Expo, contact: Pam Leach, Show Project Manager, Northeast Loggers Association, Inc., P. O. Box 69, Old Forge, Old Forge, New York 13420. Phone: 315/369-3078. Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL Show Start Date: 26 May 2017 Show End Date: 29 May 2017 Open To: Trade Visitors and General Public Location: Broward County Convention Center Fort Lauderdale, FL 33316 Event Profile: Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL is a home design exhibition. Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL is going to be held on 26-29 May 2017 at Broward County Convention Center, Fort Lauderdale, Florida. The Home Design and Remodeling Shows have a long-standing history in Miami and Fort Lauderdale for bringing the industry together with interested consumers of home improvements, interior design and remodeling. Meet face to face, with industry and retail customers ready to buy. For more information on this Expo, contact: Steve Plotkin, Show Project Manager. Home Show Management Corporation, 1450 Madruga Avenue, Suite 301, Coral Gables 33146. Phone: 305/667-9299. Construction Technology Event MAY 17th – 12:00 PM to 2:00 PM Washington Marriott Metro Center in the London Ballroom 775 12th Street NW Washington, DC 20005 Light fare and RAFFLE prizes! For more information, Media Relations Contact: Samantha Bosely, RPG Squarefoot Solutions Telephone: 301/498-3225 4th ANNUAL FLEXIBLE & COST EFFECTIVE WELL SITE FACILITIES ONSHORE 2017 DATES: 27 September to 28 September, 2017 PLACE: Houston, TX North America’s Only Initiative Dedicated Entirely to Facilities Engineers & Project Management Professionals For more information, visit the event website: www.facilities-designonshore.com The Associated General Contractors of America. For more information, contact AGC main office at 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201. Phone: 703/548-3118. Fax: 703/548-3119. Email: Info@agc.org. AGC – The Associated General Contractors of America TCC Fly-In 2017 Wednesday, May 17, 2017 to Thursday, May 18, 2017 Washington, District of Columbia Division and Committee Meetings AGC – The Associated General Contractors of America 2017 ACI-NA/ACC/AGC Airport Construction Strategy Summit Tuesday, May 23, 2017 to Wednesday, May 24, 2017 Los Angeles, California AGC – The Associated General Contractors of America WebEd: Key Tips for General Contractors & Subcontractors to Unlock Subcontract Negotiations Wednesday, May 24, 2017 – 2:00 PM to 3:00 PM Contracts and Construction Law All AGC WebEds are scheduled in Eastern Standard Time (EST). AGC – The Associated General Contractors of America AGC Safety & Health Conference Wednesday, July 19, 2017 to Friday, July 21, 2017 Denver, Colorado

AGC of Minnesota 2017 – 2018 Scholarships AGC of Minnesota is pleased to announce that the 2017 – 2018 student scholarship application form is now available. The completed form and required information is to be submitted no later than MAY 26. Questions can be directed to Merry Beckmann at mbeckmann@agcmn.org or call 651/796-2187. AGC of Minnesota – Technical School and Craft Training Scholarships The AGC of America Education and Research Foundation offers Workforce Development Scholarships to students enrolled in accredited technical schools or craft training programs in any discipline of commercial construction. Students in technical or approved craft training programs will have until JUNE 1 to apply for $1,000 scholarships (renewable for up to two years). For more information, contact: Associated General Contractors of Minnesota. Phone: 651/632-8929. Denise Woods at dwoods@agcmn.org or website: http://www.agcmn.org. MN ASPHALT PAVEMENT ASSOCIATION MAPA 4th ANNUAL GOLF EVENT DATE: MONDAY, AUGUST 14, 2017 PLACE: 12800 BUNKER PRAIRIE ROAD NW COON RAPIDS, MN PWA – American Public Works Association 2017 PWX Registration is NOW OPEN! Make plans now to be in Orlando, FL August 27-30, 2017! Come experience all the public works profession has to offer in Orlando at PWX 2017. PWX draws thousands of professionals from all over the world. If you are like many of them, you have limited resources for professional development. PWX 2017 should be at the top of your list if you are looking for OUTSTANDING EDUCATION SESSIONS; a chance to meet with an extensive gathering of EXHIBITORS SHOWCASING THE LATEST PRODUCTS, SERVICES and TECHNOLOGIES; and for OPPORTUNITIES TO NETWORK WITH YOUR PEERS, HONE YOUR LEADERSHIP ABILITIES and LEARN NEW JOB SKILLS! Join nearly 6,000 of your public works colleagues from North America and beyond in Orlando for this exciting event! Register Today! Contact: American Public Works Association 1200 Main Street, Suite 1400 Kansas City, MO 64105-2100 Toll Free: 800/848-2792 Local: 816/472-6100 Fax: 816/472-1610 BACKHOE RODEO 2017 The South Carolina Chapter of the American Public Works Association (APWA) is proud to announce the 33rd Annual Backhoe competition. The branch competition will be held the week of May 15 thru 21 in conjunction with the observance of National Public Works Week. This is an excellent opportunity for your operators to show off their skills and get a little of the attention they deserve. Please encourage employees to participate. This is a fun and morale building family event. The 2017 SC APWA Rodeo is sponsored by Company Wrench Company. Upstate Branch, Spartanburg, Tuesday, May 23rd Contact: Travis Brown 864/706-9439 Peedee Branch, Conway, Wednesday, May 24th Contact: David Gilreath 843/915-5410 Lowcountry Branch, Georgetown, Thursday, May 25th Contact: Ray Funnye 843/545-3325 Midlands Branch, Columbia, Friday, May 26th Contact: Robert Sweatt 803/545-3790 APWA SUMMER CONFERENCE – State Championship Backhoe Rodeo is TUESDAY, JULY 11, 2017 Charleston Convention Center, North Charleston, SC Backhoe needs to be delivered by 2:00 PM. Rodeo to begin at 4:00 PM and the family dinner is 6:30 PM. For more information, contact: John Myers, Chairman, SC APWA Backhoe Rodeo at 843/670-0382 3rd ANNUAL PRODUCTION CHEMICALS OPTIMIZATION UNCONVENTIONAL OIL & GAS 2017 DATES: JUNE 27, 28 & 29, 2017 LOCATION: HOUSTON, TEXAS If you are spending millions of dollars a year on production chemicals, you need to make sure your program performs. Save the dates and reserve your place early for the 3rd Annual Production Chemical Optimization 2017 Congress, the number one production chemicals optimization event in North America returning to Houston, TX on June 27, 28 and 29, 2017. The 2017 conference will not only deliver brand new E&P success stories, new technologies and innovative ways of operating chemical programs to efficiently reduce lease operating expenses, but also give you the added option of attending specially designed pre-conference workshops to explore ways to implement the latest tools to market within a practical context. Sponsorship & Exhibition Opportunities Available – Following two (2) consecutive years of sold-out exhibition, this is the only one-stop shop for North American E&Ps looking for the most innovative products, services and technologies in this space. If having your company aligned with powerhouses in the industry is an important part of your strategy, this event gives you enormous opportunities to capitalize on. There is really no other event in the region that will give you the chance to meet all the active operators with the right purchasing job titles. Please contact the ABC team at sponsorship@american-business-conferences.com or CALL: 800/721-3915. BONNELL EQUIPMENT EXPO 2017 BONNELL INDUSTRIES, INC. TRUCK & ROAD EQUIPMENT CLEAR THE WAY FOR…JUNE 7 or JUNE 8, 2017 Dates: June 7 and June 8, 2017 Place: 1385 Franklin Grove Road, Dixon, IL 61021 DEMONSTRATIONS – DOOR PRIZES – FREE LUNCH – NEW & OLD EQUIPMENT - PICK ONE DAY TO ATTEND THE EXPO! EACH CUSTOMER WILL GET ONE (1) FREE LUNCH TICKET FOR ONE DAY OF THE EXPO. Quality products, people and food is what Bonnell Industries Equipment Expos are known for. Step into our manufacturing facility all while viewing our vendors’ latest advancements in products. RSVP by JUNE 1, 2017 CALL: 815/315-2617 or EMAIL: marketing@bonnell.com or contact your sales representative. IOWA LAND IMPROVEMENT CONTRACTORS ASSOCIATION (IALICA) Dedicated to Professional Conservation of Soil and Water 2017 NATIONAL SUMMER MEETING WHEN: JULY 11, 2017 to JULY 16, 2017 (all-day) WHERE: ELEGANTE HOTEL, COLORADO SPRINGS, CO (USA) For more information on the 2017 National Summer Meeting you may contact National LICA: Telephone: 630/548-1984 Fax: 630/548-9189 Email: NLICA@aol.com

VVERY ERY LARGE LARGEE RENT RENTAL FLEET FLEET AUCTION AUCTION

~A AHERN HERN RENT RENTALS LS ~ Larrge Quan La Quanti nti tity ty o off Boo Boom & S Scissor Lif L f t s, AlT Al Ty ypes of of F Fork ork o kllifts, Welders, Ge Gener erator t rs, Li to L ght Plant nts, Trucks ks, T Trrailers, At Attachmen ment ents & Su Suppo porr t Equipment por TH SA S AT URDA DAY, JUNE JUNE 17 1 7 TH 9:30 9 :30 • LLA LAS AS V VEGAS, EG AS , N NEV E VA DA DA

SALES MANAGERS & AUCTIONEERS

ADDRESS: 1800 West Bonanza Road, Las V Vegas, egas, Nevada N 89106

HILITES INCLUDE: 35 BOOM LIFTS: JLG 600S, 2007 JLG LG 400S, 2006-(6)2005 JLG 400S 4x4, 2006 JLG E400AN, 2006 JLG E300AJ, (3)2008-2007 Skyjack kyjack SJ45T, 100 SCISSOR LIFTS: (8)2007 Genie GS4390R 0RT, (2)2006 Genie GS3384RT, 2006 Genie GS3268RT, 2009 Genie AWP-30S, (3)2006 Genie nie GS2668RT, 2006 Skyjack SJ9250, (5)2008 Skyjack SJ8850, (2)2007 Skyjack SJ8243, (2)2007 2)2007 Skyjack SJ6826RT, 2007 Skyjack SJ4632, (2)2006 SJIII4626, (3)2006-2005 Skyjack jack SJ3226, 2008-(12)2006-(2)2005 005 Skyjack SJ3219, 2007 JLG 30AM, 2006 JLG 20MVL, L JLG 1930ES, L, 1930ES (2)Upright (2)U i ht MX19 MX19, (10)2008 Hybrid H b id HB-1430, (10)2008-2007 Hybrid HB-1030, 30, 10 TELESCOPIC FORKLIFTS: 20114 Genie GTH-5519S, 2005 Skytrak 6042, 2006 Skytrak 6036, 6 6 HYDRAULIC EXCAVA AVVAATTORS: Hitachi EX330LC-5, 2008 Case CX210B, 2013 TTerex erex TC37, TC C37, 3 RUBBER TIRED LOADERS: Cat 980H, Cat 980G, 2016 Cat 926M, 6 TRACTOR LOADER BACKHOES: (3)2007 Case 580M Series 2, 15 SKID STEERS: Bobcat & Cat, FORKLIFT: Hyster, AIR COMPRESSOR: 2007 Ingersoll Rand P250WJD, 6 GENERAATTORS: 2006 Multiquip quip DCA220SSVC, 2005 Multiquip uip DCA100SSVUC, 2007 Multiquip DCA70SSIUC, (2)2005 2005 Multiquip DCA45SSI3C, 2005 05 Multiquip DCA45SSI2C, 2 WELDERS: 2007 Multiquip DLW400ES, 2005 Multiquip TLW3300SS, 26 LIGHT PLANTS: (15)2006 Allmand Nite Lite Pro, o, (11)2006 Multiquip LLT12D, T12D, VVAN AN TR RUCK: Chevy C6500, STTAKE AKE TRUCKS: International 4700, 3 WAATER TER TRUCKS: (3)2004 Ford F650, 50 3 DUMP TRUCKS: 200550, 2004-2003 Ford F650, 5 DETTAACHABLE C GOOSENECK TRAILERS: (55)New Witzco RG50, WAATER TER TOWER: 2007 Klein KPT120, 13 UTILIT Y VEHICLES: 2016 Kubota ota RTV-X900W-H, (3)2012 Kawasaki 4010T, 2007 JD TX Gator, 2007 JD TS Gator, 2007 Cluub Car XRT1200, 2007 Club Car XRT850, Bobcat 2200D, (2)2006 Taaylor-Dunn B2-10, (2)2006 006 Taaylor-Dunn SS5-36, 6 SCRAP RECYCLING EQUIPMENT E , 114 WHEELS: (69)16.5x9.75, (45)16.5x8.25, 45)16.5x8.25, 2 PRESSURE WASHERS: W ASHERS: 2013 MI-T-M HS-33504-3MGR 3500PSI, 2008 MI-T-M M HS-3505-0MGH 3500PSI, 3 HEAATING TING EQUIPMENT: 2006 06 Heatstar HS170FAVT, Scheu 1550Fast, Scheu 170Fast, 20 ATTTAACHMENTS: (16)Skid Steer eer, 187 NEW SUPPORT For BID ONLINE technical assistance EQUIPMENT, 138 SUPPORT EQUIPMENT E . call (919) 595-2907

SALE E SITE PHONE: (770) 537-7386 PERMIT #: TCP-40806

AL LEX LY LYON & SON

SALES MAN NAGERS & AUCTIONEERS, ERS, INC., BR RIDGEPORT T,, NY 13030 0 Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY Y (Evenings) (315) 637-8912 G to Go t WWW.LY LY YON ONAUCTION N COM ffor N.COM or a Complete C l t List, Li t Descriptions, D scriptions, i tions, and Pictures America’’ss Auction Companyy.. Big enough ough for the industry industr leaderrss, yet perrsonal sonal onal enough for America’s ’s farmer f r..

Page 78 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT......................................................................................27 ALEX LYON & SON INC LAS VEGAS NV........................................................................................ 77 ALLIED CONSTRUCTION PRODUCTS............................................................ 47 ATI CORPORATION............................................................................................ 56 BARGAINS...........................................................................................................72 BELL TRUCKS AMERICA INC............................................................................32 BLANCHARD MACHINERY INC........................................................................ 25 BOMAG................................................................................................................ 64 BREAKER TECHNOLOGY INC..........................................................................55 BROWN BEAR CORP.........................................................................................49 CALDER BROTHERS CORPORATION.............................................................65 CASE CONSTRUCTION....................................................................................... 9 CEG SCALE MODELS........................................................................................14 CLASSIFIEDS......................................................................................................72 COASTLINE EQUIPMENT/CRANE.................................................................... 23 CONSTRUCTION EQUIPMENT GUIDE CEG 360....................................................................................................70 AIR COMP PROMO..................................................................................26 WANTED................................................................................................... 73 AUCTION TRIPLE BUY............................................................................76 DITCH WITCH WEST.................................................................................... 40,41 DUAL DOZER...................................................................................................... 52 ECCO EQUIPMENT............................................................................................ 20 ESCO CORP........................................................................................................56 FLANGE LOCK....................................................................................................27 GEITH...................................................................................................................51 GENSCO EQUIPMENT CO LTD........................................................................ 52 HANDY HITCH.....................................................................................................68 HELAC INC.......................................................................................................... 49 HENDRIX MACHINERY LLC................................................................................ 3 HITACHI CONSTRUCTION MACHINERY......................................................... 57 HORST WELDING /HLA ATTACHMENTS..........................................................51 HYDREMA US INC................................................................................................6 HYUNDAI CONSTRUCTION EQUIPMENT.................................................. 34,35 ICUEE - ASSOC OF EQUIPMENT MFRS............................................................7 JAMES G MURPHY CO KENMORE WA..........................................................................................75 JCB INC.......................................................................................................... 30,31 JFW EQUIPMENT INC........................................................................................68 JOHN DEERE......................................................................................................29 JOHN DEERE SKID STEER...............................................................................36 KIRBY-SMITH MACHINERY INC........................................................................80 KOBELCO CONST MACH AMER LLC...............................................................43 KOMATSU AMERICA CORP......................................................................... 58,59 LEEBOY............................................................................................................... 71 LIEBHERR CONSTRUCTION EQUIPMENT......................................................11 MB AMERICA INC............................................................................................... 49

MINNICH MANUFACTURING.............................................................................66 NATIONAL ATTACHMENTS................................................................................52 NPK CONSTRUCTION EQUIPMENT INC......................................................... 53 OKADA AMERICA............................................................................................... 48 ON THE ROAD TRUCKING................................................................................17 PIRTEK USA........................................................................................................25 RANSOME EQUIPMENT SALES LLC/LRH.......................................................73 RITCHIE BROS. AUCTIONEERS....................................................................... 79 ROAD BUILDERS MACHINERY....................................................................... 5,6 ROAD MACHINERY CO....................................................................................... 2 ROADTEC............................................................................................................63 RUSH TRUCK CENTER..................................................................................... 19 SAKAI AMERICA INC.......................................................................................... 69 SANY AMERICA INC...........................................................................................23 SCOTT EQUIPMENT.......................................................................................... 21 SEC EQUIPMENT CORP................................................................................... 51 SEPPI...................................................................................................................56 SIMPSON AND SONS TRADING.......................................................................12 SULLIVAN PALATEK........................................................................................... 15 TAKEUCHI........................................................................................................... 28 TOWMASTER INC............................................................................................. 42 VOLVO................................................................................................................. 13 VOLVO CONSTRUCTION EQUIPMENT........................................................... 37 WACKER NEUSON........................................................................................38,39 WIRTGEN AMERICA...........................................................................................67 YANMAR AMERICA CORP................................................................................. 33

PACIFIC NORTHWEST SUPPLEMENT ASV ..................................................................................................................... 2 CASCADE ENGINE...............................................................................................7 CONSTRUCTION EQUIPMENT GUIDE.............................................................11 FEENAUGHTY MACHINERY COMPANY............................................................ 9 MODERN MACHINERY........................................................................................ 3 ORION EQUIPMENT...........................................................................................12 PACWEST MACHINERY.......................................................................................5 TRIAD MACHINERY..............................................................................................2

UTAH SUPPLEMENT CENTURY EQUIPMENT....................................................................................... 3 CONSTRUCTION EQUIPMENT GUIDE.............................................................11 HONNEN EQUIPMENT CO.................................................................................. 6 HOWE RENTAL & SALES...................................................................................11 INTERMOUNTAIN BOBCAT................................................................................. 9 KOMATSU EQUIPMENT CO................................................................................ 2 MESCO.................................................................................................................. 5 RASMUSSEN EQUIPMENT CO...........................................................................7 WHEELER CAT................................................................................................... 12

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 14, 2017 • Page 79

Unrreserv rvved ed public equipment auctions

WH EE LL OA DE RS

CR AW LE RT RA CT OR S

59 0+

31 5+

Fast, fleexxible financing fi avai vailable – up to 100%, 0%, $0 down do

1 of 2 – 2012 Vermeer Vermeer D60X90 D60 0X90 Series II | Williston

2014 Caterpillar 966M XE | Fort Worth

2 – 2011 Case CX210B | Pittsburgh

2 – Caterpillar D5N N XL | Pittsburgh

2012 Vo Volvvo o EC480DL E w/LaBounty MSD4000R & 2012 Vo Volvvo o EC340DL w/LaBounty MSD2500R R | LLos Ang gele eles

2009 Caterpillar 140M | Los An Ange geles

2011 Caterpillar D6T LGP | Denve ver

2009 John Deere 872D | Chehalis

MO TO RG RA DE RS

13 0+

65 0+

HY DR AU LIC EX CA VA TO RS

2014 John Deerre e 650K LGP L | Williston

36,500+ items in 115+ auctions including Williston, ND Freepor reeporrt, BHS Forrtt Worth, TX Pittsburgh, rgh, PA PA Los Angeles, CA Chehalis, WA WA Orlando, FL

Mayy 16 Mayy 117 May 17–18 Mayy 18 Mayy 19 May 23 Mayy 2 23

Tipton, CA Mayy 25 Downtown Columbus, OH Mayy 25 Chicago, IL Mayy 26 Lexington, KY KY Mayy 3 31 Denver, CO Jun 1 Sacramento, CA Jun 6 North East, MD Jun 6

Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Firm #2389, Auctioneer Eddie R. Graham #2237, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Motor Vehicle Dealer License #DLR25867, Auctioneer John L. Korrey # 7016005, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889 OAC. Terms & conditions apply. See rbauction.com

Bid in person or online ▸ No minimum bids or reserve prices ▸ Te Testt and inspectt on-site on▸ Open to the public, free registration

More items added daily Call about selling: 1.800.211.3983

See fu full auction & equipment listing gss at rbauction.com

Page 80 • May 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sales • Rentals • Parts • Service • Financing

2008 Komatsu D61EX-15E0 KM08720D $96,450

2012 Komatsu PC360LC-10 KM12957D $149,500

2011 Komatsu D65EX-17 KM12901D $133,000

2012 Komatsu D65EX-17 KM12185D $145,000

2012 Manitou MT12042 MT12038 $56,000

2009 Komatsu PC138 KM09167D $79,500

2011 Komatsu PC138USLC-8 KM11527D $71,000

2012 Komatsu PC200LC-8 KM12303D $86,500

2012 Komatsu PC490LC-10 KM12086X $178,900

2016 Komatsu WA320-7 KM16475M $159,900

2012 Deere 310KEP JD12110J $53,500

2016 Komatsu WA270-7 KM16472M $137,900

2011 Komatsu WA320-6 KM11435D $79,900

2012 Kleeman MS16Z KL12016X $137,000

2010 Hamm HD+140VO HA10045 $66,000

2007 Komatsu GD655-3E0 KMU07509 $83,500

2011 Komatsu HM300-2 KM11481D $145,000

2010 Komatsu HM400-2 KM10346D $150,000

2013 LeeBoy 8515 LB13012X $110,000

2013 Rosco DS4000 RS13004 $99,500

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • Odessa • Oklahoma City • St. Louis • Tulsa

Contact Rick Nielsen for details and pricing.

800.375.3339