Western 9, April 25, 2021 by Construction Equipment Guide

$3.00

Published Nationally ®

Western Edition

April 25 2021 Vol. XXII • No. 9

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Gateway Freeway Pr oject Enters Second Phase...12

Story on page 36

Doubling Recycle Capacity W ith Sennebogen...15

Komatsu Reengineer s XT-5 Feller Buncher s...30

Table of Contents ............4 Aggregate & Recycling Section .....................15-21 Truck & Trailer Section .... ..................................22-23 Attachment & Parts Section ......................27-32 Auction Section ........43-45 Business Calendar ........44 Advertisers Index ..........46

Contractors Now Dealing With Rising Costs Industry Battles Cost, Supply, Labor Issues Amid Construction Boom Gains The good news: Construction project bottlenecks are loosening, work is ramping up and the industry can start to breathe a general sigh of relief. The bad news: The cost of construction materials is going through the roof. A spring survey of civil contractors found that nearly three quarters of respondents have felt the impact of fluctuations in material costs on their projects in the past six months. Even more (76 percent) of those contractors expect cost increases in the next half year, according to the survey by Dodge Data in the latest issue of Civil Quarterly. Dodge chalks up the challenges to the pandemic, the reduction in material backlogs over time and disruptions in material production and distribution.

By Lucy Perry

CEG CORRESPONDENT

see COSTS page 34

A survey of civil contractors found that many are concerned with the rising costs of construction materials, chiefly lumber, steel, concrete and piping.

Page 2 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Eligible Equipm ment: NEW John Deerre Compact Wheel Loaders, Skid Steers, t Compact Trra ack Loaders,, and a Mini Excavators

F E B 1APR 3 30

0% C OMPA C T

CONSTRUCTION

EQUIPMENT

RATES AS LOW AS 0% ON AVAILABLEE NEW JOHN DEERE C OMP A C T C ONS S TRUC TION EQUIPMEN T

www.4riversequipmeent.com 0% rates and terms vary with apprroved oved d crredit edit with John Deerre e Financial. F inancial. Some restrictions applyy.. S See dealer for details. Offfer fer valid 2/1/21-4/ 2/1/21-4/30/21. /30/21.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 3

"In Business for over 33 Years" www.hendrixmachineryllc.com 2019 Case 580N, Stk#: 12627, EROPS, A/C & Heat, 200 hrs., Ext-hoe ............................$78,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla Español

2015 Cat CS544, Stk#: 12622, 66" Smooth Drum, 1,338 hrs., 14.9x24 Tires ......................$69,500

2013 JLG G12-55A, Stk#: 11883, EROPS, 12,000 lbs., 55 ft., 6,362 hrs., 48" Forks, 52" Frame, 4WD, 400/75- 28 Tires, 4 Cyl. Cummins Eng.........................................................$46,500

2012 Skytrak 10054, Stk#: 11990, 10,000 lbs., 2018 Bobcat T870, Stk#: 12511, EROPS, A/C & 54 ft., 7,019 hrs., 60" Forks, 74" Frame, Aux. Heat, 872 hrs., 7 ft. Bucket, 17" Rubber Pads, 2 Hyd., 400x75x28 Foam Filled Tires, Hyd. Self Leveling System, 4 Cyl. Cummins Eng. $38,500 Spd., Aux. Hyd., 4 Cyl. Bobcat Eng. ......$62,500

2016 Komatsu PC210LC-11, Stk#: 12604, EROPS, A/C & Heat, AM/FM Radio, 4,903 hrs., 32" Bucket, 32" Pads, 9' 6" Stick, Aux. Hyd., 80% U/C, 10' 5" Wide ............................$98,500

2012 Cat 420F, Stk#: 12727, EROPS, A/C & Heat, 1,706 hrs., 4WD, GP Front Bucket w/Cutting Edge, 90% Tires ......................$49,500

2013 JLG /Skytrak 10054, Stk#: 11916, 10,000 lbs., 54 ft., 7,616 hrs., 60" Forks, 74" Frame, 400x75x28 Foam Filled Tires, 4 Cyl. Cummins Eng ........................................................$38,500

2018 Doosan DX63-3, Stk#: 11495, EROPS, A/C & Heat, 863 hrs., 36" Quick Connect Bucket, 78" 2017 Multiquip 25KW, Stk#: 12612, 6,604 Hrs., Push Blade, 16" Rubber Tracks, 4 Cyl. YanMar 33 Phese 240/480 Volt, 1 Phese 240/120 Volt, Eng ........................................................$48,500 ST175/80R18 Tires ................................$15,500

2011 Volvo A25E, Stk#: 11745, EROPS, A/C & Heat, 6WD, 11,000 hrs., 25 Ton Cap., 23.5Rx25 Tires ......................................................$76,500

2012 LayMor SM300, Stk#: 12069, OROPS, 8 ft. Broom, 3 Wheel, Water System, ST205x75Rx14 Tires, 4 Cyl. Kubota Eng. ......................$16,500

2009 Broderson IC80-2H, Stk#: 12442, 18,000 lbs., 46 ft., 1,407 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

2014 Cat D6T LGP, Stk#: 12523, EROPS, A/C & Heat, Sweeps, St./Tilt Blade, 4,913 hrs., 36" Pads, 80% U/C, 12' 7" Wide ................$126,500

2014 Cat D5K2 LGP, Stk#: 12659, EROPS, A/C & Heat, AM/FM Radio, Rear Screen, 6 Way Blade, 4,025 hrs., Ripper Ready, 24" Pads, 10 ft. Wide .... ................................................................$89,500

2015 Cat D6T LGP, Stk#: 12024, EROPS, A/C & Heat, Available with St/Tilt, Blade or Hyd. Angle 2009 Broderson IC80-2H, Stk#: 12456, 18,000 Blade, 6,429 hrs., 36" Pads, with Paccar Winch lbs., 46 ft., 1,345 hrs., 10 ft. JIB, 4WD, 4WS, 69 or Ripper..............................................$129,500 hp., 10.00Rx15 Tires................................$21,500

2013 Genie GTH55-19, Stk#: 12435, 5,500 lbs., 19 ft., 2,252 hrs., 4WD, 48" Forks, 48" Frame, 12x16.5 Tires, 4 Cyl. Deutz Eng ............$36,500

2015 Massey Ferguson 593, Stk#: 12557, EROPS, A/C & Heat, 4WD, 4,950 hrs., w/Alamo Hyd. Side Boom, 18.4x34R1 Rear Tires, 14.9x24 Front Tires..............................................$29,500

2014 Cat D6T LGP, Stk#: 12410, EROPS, A/C & Heat, AM/FM Radio, Sweeps, Rear Screens, 2019 JLG 943, Stk#: 12211, New, 9,000 lbs., 43 St./Tilt Blade, 5,071 hrs., 36" Pads, Hyd. PA56 ft., 537 hrs., 60" Forks, 72" Frame, 370/75x28 Winch, 12' 7" Wide ..............................$129,500 Foam Filled Tires..................................$109,500

2019 Sullair 185D, Stk#: 12049, New, 390 hrs., 185CFM @ 100 PSIG, 2700 RPM, 125 PSI, ST226 Tires, 3 Cyl. Kubota Eng. ............$17,500

2015 Doosan G25E5, Stk#: 12280, 15ft., 1,559 Hrs., 40" Forks, 3 Stage Mast, 7.00x15x5.50 Front Tires, 6.50x10 Rear Tires, Duel Fuel Propane/Gas ..........................................$19,500

2006 Broderson IC80-3G, Stk#: 12436, 18,000 lbs., 46 ft., 2,904 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires................................$16,500

2013 Cat D6T LGP, Stk#: 12081, EROPS, A/C & Heat, Sweeps, Rear Screen, Available with St/Tilt 2018 Cat D3K XL, Stk#: 12636, EROPS, A/C & Blade or Hyd. Angle Blade, 6,686 hrs., 36" Pads, Heat, 6 Way Blade, 2,945 hrs., 16" Pads, 80% with Allied Winch or Ripper ................$119,500 U/C, 8' 6" Wide ......................................$89,500

2018 Kobelco SK75SR3, Stk#: 12313, EROPS, A/C, 1,224 hrs., 24" Bucket, 8 ft. Push Blade, 18" Rubber Tracks........................................$66,500

2013 Atlas Copco QAS90, Stk#: 12088, 6,135 hrs., ST205x75Rx15 Tires, JD Eng. ........$19,500

2016 John Deere 210G, Stk#: 12609, EROPS, A/C & Heat, AM/FM Radio, 4,140 hrs., 80% U/C, 32" Pads, 20" Bucket, 9'4" Stick, Aux. Hyd., 10' 6" Wide ..................................................$98,500

2016 Komatsu PC210LC-11, Stk#: 12604, EROPS, A/C & Heat, AM/FM Radio, 4,903 hrs., 32" Bucket, 2010 JLG 600AJ, Stk#: 12136, 500 lbs., 60 ft., 2,928 hrs., 355x55Dx625 Tires, 4 Cyl. Deutz 32" Pads, 9' 6" Stick, Aux. Hyd., 80% U/C, 10' 5" Wide ........................................................$98,500 Eng.........................................................$29,500

2004 Onan DQAF5635024, Stk#: 12519, Cummins Eng., 14,000 lbs. ..................$18,500

2012 Genie S40, Stk#: 12106, 500 lbs., 40 ft., 3,307 hrs., 12x15.5 Foam-Filled Tires, 3 Cyl. Deutz Eng ..............................................$22,500

2016 John Deere 210G, Stk#: 12608, EROPS, A/C & Heat, AM/FM Radio, 3,837 hrs., 32" Pads, 2015Bomag BW211D-50, Stk#: 12486, 84" Smooth Drum, 2,230 hrs., TR-387 Tires, 4 Cyl. 80% U/C, 9' 10" Stick, Hyd. Thumb, Aux. Hyd., 10' 6" Wide ............................................$109,500 Duetz Eng ..............................................$59,500

2018 Cat 420F2, Stk#:12708, OROPS, 4WD, 871 2017 Volvo L70H, Stk#: 12722, EROPS, A/C & hrs., 22" Bucket, Ext-Hoe, Pilot Controls, 19.5Lx24 Heat, 2,600 hrs., Hyd. Quick Connet, Bucket and Rear Tires, 12.5x80x13 Front Tires..........$69,500 Forks ........................................................$98,500

Page 4 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The American Society of Civil Engineers (ASCE) has released its 2021 Report Card for America’s Infrastructure. The report, published once every four years, gave the United States a C- overall grade — up from a D+ in 2017 — marking the first time in two decades that the country has received a grade in the C range.

HYUNDAI WELCOMES NEW DISTRICT SALES MANAGER BROWN

Hyundai Construction Equipment Americas, Inc. announced the addition of Matt Brown to the CE sales team. Brown will be responsible for assisting Hyundai dealers across the Western region of the United States. Brown joins Hyundai with more than 11 years of varied territory sales experience.

HITACHI ENGAGES DISTRIBUTORS IN VIRTUAL DEALER MEETING

While Zoom meetings and Webinars seem to be the preferred method of meetings in the COVID-19 era, Hitachi Construction Machinery Loaders America Inc. (HCMA) decided to step it up and produce a full-on TV production virtual meeting.

AEM LAUDS EFFORTS TO CREATE CHIEF MANUFACTURING OFFICE

Association of Equipment Manufacturers (AEM) President Dennis Slater issued a statement in support of the Office of Manufacturing and Industrial Innovation Policy Act introduced March 29 by U.S. Senators. The legislation creates an Office of Manufacturing and Industrial Innovation Policy.

CREWS BEGIN SECOND PHASE OF GATEWAY FREEWAY PROJECT

The Arizona Department of Transportation’s $77 million Gateway Freeway project, which started just four months ago, will add an interim four-lane divided roadway between Ellsworth Road and Ironwood Drive when it is completed by fall 2022.

CONSTRUCTION COMMENCES FOR PERMANENT FIX ON U.S. 89

In less than 48 hours after heavy rains and flood waters took down a 30-foot section of US 89 north of Flagstaff near Cameron in 2018, ADOT had the highway reopened to traffic. The $1.7 million project is expected to be completed by the fall. Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

ADOT RELEASES ITS FIVE-YEAR CONSTRUCTION PROGRAM: 2022-26

The Arizona Department of Transportation recently released its proposed five-year construction program that is now available for public comment. The 2022-2026 Tentative Five-Year Transportation Facilities Construction Program allocates funding for several projects to widen highways and improve safety.

KENWORTH’S T880S MEET CHALLENGE OF CHARAH SOLUTIONS

When Charah Solutions challenged Kenworth to meet its tough truck application specifications, the result was a success for its operations. Founded in 1987 and based in Louisville, Ky., Charah Solutions is a leading provider of environmental and maintenance services to the power generation industry.

MACK TRUCKS PRODUCES ITS MD SERIES TRUCKS AT VA. FACILITY

Mack Trucks recently began initial production of its all-new Mack MD Series of medium-duty trucks at its Roanoke Valley Operations (RVO) facility in the Roanoke Valley, Va. Full production of the Mack MD Series bean in September 2020.

INTERCOMPWIM DELTA SOFTWARE SIMPLIFIES INVENTORY TRACKING

Intercomp, a manufacturer of portable vehicle weighing and measurement products, has made its IntercompWIM Delta software available to the global industrial scale market. The software is a stand-alone interface for customers to take advantage of Weigh-In-Motion technology.

ALLU ANNOUNCES KEYSTONE DRILL SERVICES INC. AS ITS NEWEST DEALER

ALLU Group Inc. announced Keystone Drill Services Inc., with headquarters in Somerset, Pa., as its newest dealer of the ALLU Processor line. Keystone will provide sales, parts and service for ALLU’s power-mixer attachments to customers primarily in the western United States.

THREE COMPANIES OFFER SEAA/NCCER CRAFT TRAINING PROGRAMS

The Steel Erectors Association of America announced that it has continued to expand its member network of companies which delivers the SEAA/NCCER Ironworker Craft Training and related programs. Since late 2020, three new companies can now offer SEAA/NCCER training and assessments.

AGGREGATE PRODUCTION & RECYCLING SECTION

Description

15 18 20

SUN SERVICES DOUBLES RECYCLING CAPACITY WITH SENNEBOGEN

MCCLOSKEY INTERNATIONAL UNVEILS SF50 FEEDER STACKER WHEN USING RECLAIMED ASPHALT CAN MAKE THE DIFFERENCE

VOLVO EXPANDS MATERIAL HANDLER LINE WITH NEW MODELS

43 44

COMING AUCTIONS BUSINESS CALENDAR

27 30

EPIROC CB 5500, CB7500 Concrete Busters KOMATSU XT-5 Tracked Feller Buncher

DEPARTMENTS EQUIPMENT

Dennis Hogeboom

Kent Hogeboom

Patrick Kiel

Sharon Swanson

• Colorado • Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

952/353-1770 612/481-8557 Cell e-mail pkiel@cegltd.com

760-518-4336 Cell e-mail sswanson@cegltd.com

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

ASCE ‘REPORT CARD’ STATES CALIF. ROADS NEED UPGRADES

Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

WESTERN EDITION

YouTube

602/679-8759 dennishogeboom@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 5

563-8 872-4 4112 112

Bellevue (Dubuque), ubuque), Iowa sales@jjjscheckel.com RENT OR

BUY!

2002 CA ATT D11R - $1855,000

2009 CA ATT D10T - $468,000 $ ,

7PZ High g Horse series, Runs R andd oper p ates a to spec p , RJG S#, 1 Owner since new w,, 8,3000 hours on $683,000 bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Documented CAT Dealer Complet U-blade A/C, HHeaat. Could p e Rebuild, SS ripper pp r,, paint, otherwise very straight i i d, Clean, GGoodd U/C. i h tractor from good home. U blade, Twin tilt, Well maintaine U/C

RENT OR

BUY!

RENT OR

2004 CA ATT D10TT - $$350,000 ,

RJG Series, 23,037 hours, h 4,701 idle dl hours hours, h Single S shank ripper pp r,, U blade with th ttwin Tilt. A/C, Heat. CAT eady to t go. AT dealer d l maintained, Seerviced and rready

RENT OR

BUY!

2013 CA ATT D9T - $618,000

2012 CA ATT D6T D XW VP PA AT - $149,000 $ ,

idle, ARO CAT AT Acc A ugr g ade d GPS Ready. 5,250 Hours, 517 hrs att idle. dl U Blade, l d MS Ripper pp r,, GPS 6,250 Hrs, 1,472 idle l d . Straight S ih Erops, A/C, Diffff Steerr,, VPAT AT 6-w 6-wayy blade l Grade control readyy. Original ppaint, straigh ght & clean. and clean. Rent/Lease e or Buy B y.. Documented maintennance andd oil sample l history.

RENT OR

BUY!

2012 CA ATT D6T LGP VP PA AT - $$139,000 , 2018 CA ATT 390FL,, A02851- $68 $688,,000 2018 CA ATT 390FL, A002819 - $$628,000 , 2019 CA ATT 374FFL,, A02873 - $61 $618,000 2012 Komats atsu t u PC80 PC800LC-8 - $358 $358,000 8,500 Hours, 2,700 at idle. CAT AT Acc A ugr g adde, AROO, O, GPS 3,100 Hrs, 2 Year Year par p ts/labor /l Cat warranty w y. 27’’ Boom, B 5,780 Totall hrs, h 1,550 at idl dle lle. 2 Year Year par p ts/labor /l b Cat C 6”” 8 Yar ight. 27’’ Boom, readyy. Erops p , A/C, Diff steerr,, Good G d unddercarriage g. 11’2”” SStick, 96” Yardd bucket. 1 Ow wnerr.. Excellent Ex U/C. Warrantyy remains. 1 Ownerr.. Super p straigh B Original, Full documented history,y, as nicce as they come. 14’’ SStickk, 77”” Bucket, B Aux hydraulics, i l super clean machine. Rent/Leease or BBuyy.. d li EExcellent U/C.

RENT OR

BUY!

2006 Komatsu PC800LC-8 - $33 $338,000 , 7,200 Original g hrs, Reputa p tion machinne, Straigh g t, 10”” SStick i k, 72”” Bucket, clean, original gi l. 11’1 11’10” B , Goodd U/C w/ trackk ppads. 32”” tr d Komatsu dealer tested & inspected.

RENT

BUY!

2014 C CA ATT 740B - $218 $2188,000 ,

7,600 Hours, 2,483 at idle, Original g pa paint, Service history,y, Oil samples p , Full workk orrder p ed. dder complet Goodd tirres es, Work W k ready. Rent/Leasee or Buy. B

B POWERTRAIN PLUS REBUILDS

RENT OR

2,211 Hours, 2 Year Y remaining e g CAT AT fac factoryy warranty,y, Reputa p tion 1-ow wner machine, Full history since new w,, k , Reputa 00 Total 11’100”” Stick. 13’7”” Stick S , 4.3 yard 67” 6 ” BBucket p tion 1 ownerr.. 10,0,4400 T hrs, SStraigh g t, clean, fresh ppaint.11’ S Hydraulics tooll control equiped. Super clean/straight. Quick couplerr,, 66 66” 6”” Bucket, B k New trackk grroups oups, 36”” pads. pads S

RENT OR

BUY!

RENT OR

BUY!

2013 CA ATT 329EL - $114,000 ,

4,700 Hours, New 54”” bucket, bbuckk 10’6”” SStick, i k Fullyy

loaded, Longg and Wide UC, Patternn changer g r,, Ex Excellent ll

condition, OOriginal paint. Rentt/Lease /L or Buy.

2014 CA ATT 988K K - $338,000 ,

9,417 Original g hrs, 2 Yearr,, FFacctoryy Powertrain i Warranty W remains. Yard spade p nose bucket, i RRide id control. 10 Yar r d to go! Straight, clean, fully tesstedd andd ready

BUY!

((2)2015 ) CA ATT 982M’ 9882M’s - $258,000 , EA.

RENT OR

BUY!

(4)2013-2016 ) C CA ATT 740B’ 740B’s $168 $168 $188 168,,00000 - $188,0 $ ,000 EA.

2015 C CA ATT 836K K - $448,000 $ ,

V RSIONS HIGH REACH CONVE

RUM ROLLERBLADES HOLMES SMOOTH DR

10,900 Total frame hours, h 5,9978 at idle dl , only ly 4,922 of actual “in-oper p ation”” hours. Very goodd feet.. SService vi 11,500 Hours, DDealer maintained, d SService history, h y, Oil O history since new. All systeems testedd to OEM spec. samples, Full work order done. Goood tires, Tailgates.

2015 CA ATT 980M - $258,000 A

77,800 800 Hours, H Agg Aggrega g te t handler dl additions. dditions 1 Ownerr,, Agg ggrega g te handler dler pack p kage g , 6,200 6 200 Hours, H 1 Ownerr,, bbb r,, OOn board scales, Ride control. Goodd radial d l rubb b r,, 7.5 7 5 yardd GP bucket. buck Ride contrrol Good radial rubber bbber ol. Full documented history,y, as nice nic as they come. Full history,y, as nic nice as they h come. Rent/Lease or Buyy..

BUY!

2005 CA CATT 825H 825H8 $248,,000 $248

2008 CA CATT CP56 C - $89,000 $ ,

84”Vibratoryy pad ad ffoot oot, 2,585 Hrs, Enclosed l d CCab, A/C, 15,500 Original fram me hours, Well maintained, p ion, Original g paint, Veryy well maint’d, Excellent feet, Erops, Straigh g t blade w/ tilt, Clean Front blade option, E Fully Serviced & ready d to go. Rent/Lease or Buy. l S i d R machine, Cat Facts ser ervice hi history avail. Rent/Buy.

RENT OR

BUY!

NEW! Ready to ship!

2006 CA ATT D10T Rebuild In n Process - $885,000. Zero hour Powertrain Plus, OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

2017 CA ATT 349FL UHD D - $458,000 ,

Zero hours on custom Ultr Ul a-High H gh RReachh Demolition l Conversion. 96’6” Total reach, u attach boom & h, Quick lines, Hydraulic tilt cab, Highest quality pkg.

visit

Holmes 11F - $23,00 $23,0 ,000 / 16F - $29,000

2016 CA ATT 627K 6 - $478,000 8,000

2018 CA AT RM500B - $580 $580,000

mainingg 2 year parts/service factoryy p , A/C, 33.25+29 25+29 Rubberr,, 978 Hours. Remaining 2 Models, 11’’ or 16’ cutting width. Made in Iowa. 5,070 Hours, Push/Pull, Erops Original paint, Full documented histtory,y, Under h Universall rotor hine Cat Warrantyy. 1 Owner Ow machine, r Construction ggrade, extreemee dduty. For haul h l road & site ddealer l care since new, will not dissappoint! leveling, compacting & sealing dir di t prior to rain event. for both Asphhalt Reclamation or Soil Mixing.

JJSccheckel.com

and w watch our new company vid deo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8TT,, D9TT,, D10TT,, D11T Large Excavators - Cat 374FL, L, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel.com | www. jjsscheckel.com | follow us ffor orr daily updates:

Page 6 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASCE ‘Report Card’ States Calif. Roads Need Upgrades The American Society of Civil Engineers (ASCE) has released its 2021 Report Card for America’s Infrastructure. The report, published once every four years, gave the United States a C- overall grade — up from a D+ in 2017 — marking the first time in two decades that the country has received a grade in the C range. However, the overall grade still means that the nation’s infrastructure is “in mediocre condition, has deficiencies and needs attention.” U.S. Transportation Secretary Pete Buttigieg said that the report card results “tell us something we already know – that we have a long way to go … that we are past the point of allowing Infrastructure Week to be a Washington punchline once again.” ASCE Executive Director Thomas Smith cautioned that “we have not made significant enough investments to maintain infrastructure that in some cases was built more than 50 years ago. As this study shows, we risk significant economic losses, higher costs to consumers, businesses and manufacturers — and our quality of life — if we don’t act urgently.”

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Where does California stand in the rankings? The last ASCE comprehensive assessment of California’s infrastructure awarded the state’s infrastructure systems a C- grade, marking a drop from the C grade previously earned in 2012. The most recent grades, which designated California’s infrastructure as “requiring attention,” varied between C+ [for aviation, ports and wastewater] and D [for roads, inland waterways and levees]. None of California’s infrastructure categories were robust enough to earn an A or a B grade. ASCE called on Congress and the administration to take “big and bold action”on infrastructure quickly and highlighted the role infrastructure investment could play in speeding the nation’s economic recovery. “America’s infrastructure bill is overdue, and we have been ignoring it for years. The COVID-19 pandemic only exacerbates the funding challenge because state and local governments have had to prioritize public health over everything else for the past year,” said ASCE President JeanLouis Briaud.” 

Hyundai Welcomes New District Sales Manager Brown Hyundai Construction Equipment Americas, Inc. announced the addition of Matt Brown to the CE sales team. Brown will be responsible for assisting Hyundai dealers across the Western region of the U.S. Originally from Calhoun, Ga., Brown joins Hyundai Construction Equipment with more than 11 years of varied territory sales experience, most recently working as a regional sales manager of another construction Matt Brown OEM. Brown currently lives in Dallas, Texas, and enjoys working out, playing golf and being outdoors in his spare time. “We are excited to welcome Matt on board with us at Hyundai,” said Mike Ross, HCEA vice president of CE sales. “Matt’s customer focus and sales management skills will make him a significant asset to support our Western district dealers and their customers.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 7

Contact Jamie Gales 10906 NW South River Drive Medley, FL 33178

(305) 851-3963 (305) 851-3670

IMPECO CORPORATION MIAMI MACHINERY

Hundreds of used machines in stock and ready for delivery Construction-Ag-Industrial Sales Trusted Dealer Since 1994

Call or Check out our website for more info: www.miamimachinery.net

2015 John Deere 310SK Hours: 2121 $36,000

2017 Kubota SVL95-2S Hours: 954 $41,600

2017 Caterpillar 289D Hours: 560 $42,800

2015 John Deere 333E Hours: 65 $39,600

2016 Bobcat E45 Hours: 684 $29,100

2015 Bobcat E35 Hours: 538 $24,400

2004 Caterpillar 312C L Excavator Hours: 6,285 $39,800

2005 Caterpillar 950G Hours: 8,167 $59,900

2004 John Deere 544J Hours: 5,350 $50,200

2012 Caterpillar D6T XL VP Hours: 6,525 $77,500

2013 John Deere 6115D MFWD Hours: 1,074 $34,800

2020 John Deere 3039R Hours: 14 $25,500

2013 John Deere 8285R MFWD Hours: 995 $88,400

2010 John Deere 8345R Hours: 5,096 $69,900

2012 John Deere 6125R MFWD Hours: 285 $56,200

2008 John Deere 7830 MFWD Hours: 1,807 $63,900

2010 John Deere 9770 Hours: 2,712 $51,400

2005 John Deere 6420 MFWD Hours: 4,911 $29,200

2008 John Deere 6430 Premium MFWD Hours: 678 $41,400

2010 John Deere 7230 MFWD Hours: 5,028 $34,600

Page 8 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

West Abilene Equipment Center abileneequipmentcenter.com Abilene, TX 325-603-1328 Alpine Equipment Repair Check us out on Facebook Woods Cross, UT 801-874-6061 Cascade Trader, Inc. cascadetrader.net Chehalis, WA 360-748-1182 Cisco Equip cisco-equipment.com Artesia, NM 575-748-1314 Odessa, TX 432-550-9181 Lubbock, TX 806-745-9595 San Angelo, TX 325-653-2121 CSTK cstkequipment.com Kansas City, KS 888-225-2785 Earhart Equip Corp. earhartequipment.com Tucson, AZ 520-889-6396 Four Seasons Equip, Inc. fourseasons-equip.com Houston, TX 800-234-5007 Dallas TX 866-270-1700

hceamericas.com

Jet City Equip jetcityequipment.com Oak Harbor, WA 360-675-4441 Marysville, WA 360-651-9079 Wenatchee, WA 509-888-8181 Mecom Equipment mecomequipment.com Stockton, CA 209-466-5135 Motor City Rentals & Sales motorcityrents.com Phoenix, AZ 602-539-2911 Nueces Power Equip nuecespower.com Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Antonio, TX 210-310-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 El Paso, TX 915-541-0066 Oregon Tractor oregontractor.com Roseburg, OR 541-679-6211 Portland, OR 503-282-7211 Porter Group Usa portergroupusa.com Corona, CA 951-674-9999 Lakeside, CA 619-390-1197 Pacoima, CA 818-834-0102 Newark, CA 510-713-7368 W Sacramento, CA 916-372-5925 Wildomar, CA 951-678-9902

R&S Industries Inc. rsindinc.com Clovis, NM 575-769-8659 Springdale Tractor Tulsa, OK 918-224-1565 Tractor Service tractorserviceonroute66.com Albuquerque, NM 505-345-8443

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 9

THE HARDEST WORKING WARRANTY ON THE JOBSITE.

5 YR 3 YR

With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.

STRUCTURAL

STANDARD

*Limited lifetime warranty on the center pin.

TOMORROWSEDGETODAY.COM

Page 10 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hitachi Engages Distributors in Its First AEM Lauds Efforts TV Production Virtual Dealer Meeting to Create Chief While Zoom meetings and Webinars seem to be the preferred method of meetings in the COVID-19 era, Hitachi Construction Machinery Loaders America Inc. (HCMA) decided to step it up and produce a full-on TV production virtual meeting. With several topics of discussion on the agenda, there was concern over a 3hour virtual meeting and keeping dealer personnel engaged. The solution was to make this meeting top quality, engaging and, most importantly, a platform for dealer personnel to provide input on various topics. “This platform gave us the opportunity to expand our audience. Normally, in face-to-face dealer meetings, dealers are represented by executives tasked with taking the messages back to their team. We chose to expand our audience to include all dealer personnel allowing us to not only reach key personnel, but to encourage input from all members of the dealer team,” said Sam Shelton, marketing manager. “Our meeting theme, Solutions Simplified, symbolizes the overall objective of many of the initiatives presented in this meeting.” The 300-plus attendees participated for the full 3 hours, staying engaged with polls, videos, trivia contests, customer testimonials and Q&A from the field. The topics were a mix of new announcements, product and program launches, and future initiatives mixed with topics suggest by the audience

Al Quinn, managing director, addresses the audience.

Manufacturing Ofc.

Behind-the-scenes look at the pop-up studio for the HCMA Virtual Dealer Meeting 2021 “Solutions Simplified.”

through the pre-meeting survey. The result was a mix of informative and educational content. The meeting also set the stage to announce the 2020 MVPs and Dealer Award Winners. Earning the President’s Award, an award based on market share growth, were All Island Equipment, Chappell Tractor Sales Inc., Frank Martin Sons Inc., Link-Belt MidAtlantic Construction Company, Westchester Tractor Inc. and APCO Equipment Corporation. Earning the Chairman’s Award, an award based on market share, growth, and customer engagement, were RECO Equipment Inc., Great Southern Equipment Company and Garton Tractor Inc. Building a pop-up TV studio on campus to host this inaugural venture required participation from several departments, including the IT team. The production team from RIVE, based in Washington, D.C., produced remotely from Washington, D.C.; Brooklyn, N.Y.; Boston, Mass.; and Atlanta, Ga., reaching an audience throughout the United States and Canada. Attendees were treated to a parts facility and remanufacturing plant tour, as well as the Hitachi Construction Machinery primary global parts facility in Japan, and several of the manufacturing facilities world-wide.

“I want to thank our team for facilitating a great program and for our dealer network who had all of their different departments engaged throughout the meeting. This wasn’t designed as a one-way meeting. The technology gave us the opportunity to make everyone feel like they were in the room with us. It was a lot of fun and exceeded my expectations,” said Simon Wilson, senior sales manager. For more information, please visit www.hitachiwheelloaders.us. 

Simon Wilson, senior sales manager, responds to questions from the audience.

Association of Equipment Manufacturers (AEM) President Dennis Slater issued the following statement in support of the Office of Manufacturing and Industrial Innovation Policy Act introduced March 29 by U.S. Senators Amy Klobuchar (D-Minn.); Rob Portman (R-Ohio); Chris Coons (D-Conn.); Roger Wicker (R-Miss.); and U.S. Representatives Marcy Kaptur (D-Ohio); Tim Ryan (ROhio); Brian Fitzpatrick (R-Pa.); and Haley Stevens (DMich.). The legislation creates an Office of Manufacturing and Industrial Innovation Policy (OMII) in the executive office of the President. “A thriving manufacturing sector is not only essential to our national security but also to continued economic growth and job creation, and the Office of Manufacturing and Industrial Innovation will help ensure America’s global leadership in manufacturing,” said Dennis Slater, president of the Association of Equipment Manufacturers. “The Association of Equipment Manufacturers was the first industry group to call for the creation of a chief manufacturing officer and the development and execution of a national manufacturing strategy, and we commend the group of lawmakers in the U.S. Senate and House of Representatives for their leadership in crafting bipartisan legislation that will accomplish both goals. “Equipment manufacturers represent one in eight manufacturing jobs in the United States and support 2.8 familysustaining jobs, and our long-term success depends on the future competitiveness of U.S. manufacturing in the global economy. We urge lawmakers in both parties to support this important legislation and increase our nation’s global manufacturing competitiveness.” Last spring, equipment manufacturers called on the federal government to develop and implement a comprehensive national strategy for manufacturing. In an April 22, 2020, Morning Consult op-ed, Slater wrote, “We hope this can act as a starting point or a broader dialogue about how to ensure the country’s global leadership in manufacturing and guarantee the long-term economic and national security of the United States.” For more information, visit www.aem.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 11

ARIZONA STATE SECTION

“The Nation’s Best Read Construction Newspaper… Founded in 1957.” Your Arizona Connection – Sharon Swanson – 1-760-518-4336 – sswanson@cegltd.com

Crews Begin Second Phase of Gateway Freeway Project A project to add 5 mi. of travel lanes to the Phoenix area’s carry SR 24 over Ellsworth Road in an area close to The first 1-mi.-long stretch of SR 24 between Loop 202 newest freeway is advancing in the southeast Valley with Phoenix-Mesa Gateway Airport. (Santan Freeway) and Ellsworth Road opened to traffic in some of State Route 24’s concrete pavement already in A drainage channel that will run parallel to the SR 24 May 2014. place. extension on the north side of the freeway corridor also is ADOT worked with the Federal Highway Administration The Arizona Department of Transportation’s $77 million under construction. and regional planners to arrange funding for the current SR 24 Gateway Freeway project, which started project as a way to provide drivers with a new just four months ago, will add an interim route to ease local traffic demands — years four-lane divided roadway between ahead of when a full freeway could be built. Ellsworth Road and Ironwood Drive when it is completed by fall 2022. Project Elements A stretch of SR 24 is now paved • Two paved lanes in each direction separatbetween Meridian Road and Ironwood ed by a graded median; Drive, near the boundary between • At-grade intersections at the following Maricopa and Pinal counties. The paving locations: is part of an initial phase to build the Williams Field Road future intersection between SR 24 and Signal Butte Road Ironwood Drive. Current restrictions Meridian Road along Ironwood Drive are scheduled to Ironwood Drive wrap up by early this summer. • Bridges over Ellsworth and Mountain The project also is currently focused roads; on the earthwork and drainage improve• A drainage channel along the north side of ments. A fleet of large trucks and other The Arizona Department of Transportation’s $77 million Gateway Freeway project, the freeway; equipment is being used to haul dirt to which started just four months ago, will add an interim four-lane divided roadway • Signage, traffic signals, lighting and build embankments for bridges that will between Ellsworth Road and Ironwood Drive when it is completed by fall 2022. pavement marking, as necessary. 

Construction Commences for Permanent Fix On U.S. 89 In less than 48 hours after heavy rains and flood waters took down a 30-foot section of US 89 north of Flagstaff near Cameron in 2018, ADOT had the highway reopened to traffic. In order to reopen the highway in less than two days after the flood damage, more than 40 ADOT personnel responding from as far away as Page, Payson and Williams had to thoroughly assess the site, excavate the damaged areas, haul in and compact 500 cubic yards of material to restore the

roadway’s base, and put down 120 tons of asphalt pavement. As well-done as those emergency repairs were, a permanent solution is needed. Now, ADOT is starting a project to do just that for this section of highway. The work consists of reconstructing that segment of US 89, improving the drainage system in the area and removing an old abandoned bridge. During this project ADOT will utilize smart work zone technology to help maintain traffic flow and reduce the

potential for crashes. Portable message boards will be placed ahead of the work zone with real time traffic speed information giving drivers a heads up as they approach. The $1.7 million project is expected to be completed by the fall. In addition to serving local traffic, this stretch of highway is a significant travel corridor for people heading to tourist destinations such as the Grand Canyon, Lake Powell, Monument Valley and other locations. 

Construction Equipment Guide • Arizona Section • www.constructionequipmentguide.com • April 25, 2021 • Page 13

Pros Kno Pros Kno ow! w!

T Those in the know w,, know Takeuchi Take euchi

Takeuchi of o ffers a wide range of compact excavatorss to help you get your tougheest tasks comppleted. PUT A TAKEUCH A HI TO WORK ON O YOUR JOBSITE AN ND EXPERIIENCE THE DIFFEREN NCE!

www.ditchwitchaz.com

4028 S 36th Street Phoenix, AZ 85040 (602) 437-0351 6975 N Camino Martin Tucson, AZ 85741 (520) 579-0261

takeuch hi us.com hi-us.com

ADOT Releases Its Five-Year Construction Program: 2022-26 Quality Used Water We Deliver Worldwide!

The Arizona Department of Transportation (ADOT) recently released its proposed fiveyear construction program that is now available for public comment. The 2022-2026 Tentative Five-Year Transportation Facilities Construction Program allocates funding for several projects to widen highways and improve safety, including: • Adding lanes along I-17 between Anthem Way and Sunset Point, with construction on the $328 million project beginning in 2022; • Replacing the Gila River bridges on I-10 between Phoenix and Casa Grande. Construction for that $83 million project is targeted for 2023; • Constructing the first phase of the I40/U.S. 93 West Kingman interchange. The $70 million project is expected to begin by 2024; • Widening U.S. 93 between Tegner Street and Wickenburg Ranch Way. The $41 million project is scheduled for 2022. Additionally, the tentative plan will invest more than $1 billion in pavement preservation projects across Arizona over five years, upgrading 581 lane miles of pavement from fair and poor condition to good condition. The I-17 and I-10 widening projects are

able to advance through ADOT’s partnership with the Maricopa Association of Governments, the regional planning agency that has committed some of the funds for those improvements. “ADOT and the Maricopa Association of Governments are committed to safely and efficiently move people and freight on these two Key Commerce Corridors that will better connect Arizona to major markets, while helping us better compete for quality jobs, economic growth and prosperity,” ADOT Director John Halikowski said in a statement. “And just as importantly, ADOT is investing in projects that will preserve and maintain our highway system to keep our roads and bridges in good condition.” The 2022-2026 Tentative Five-Year Program also reaches ADOT’s goal of allocating $320 million per year for preservation of bridges and roadways throughout the state highway system. Preservation projects include repaving and repairing highways, along with repairing or reconstructing bridges. The tentative plan includes $407 million over five years for projects that improve highway safety, efficiency, and functionality, such as smart technology or addition of shoulders. 

Trucks & More 2019 International DuraStar 4300 2018 International DuraStar 4300 2018 International DuraStar 4300 Stock # 18G54BX, 24ft Box Stock# 18F24WT, 2K tank Stock# 19F20WT, 2K tank

2015 Peterbilt 337 Stock# 15H43WT, 2K tank

2016 Peterbilt 348 Stock# 16G53WT, 4K tank

Call for Pricing (602) 437-3980

Trade-Ins Accepted Warranty Add-Ons Available

2018 International DuraStar 4300 Stock# 18M51WT, 2K tank

Parts 156 E. Mohave Street Phoenix, AZ 85004

www.SuperiorEquipmentInc.com

Financing Available

Page 14 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Pages 15-21

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Sun Services Doubles Recycling Capacity With Sennebogen In some equipment fleets, preventive maintenance is a periodic afterthought. At Sun Services LLC, it’s a full time job. Averaging 70 tons or more of construction and demolition debris to receive, process and ship every hour of its working day, Sun’s recycling facility can’t spare a minute for downtime. When the Sun Services site was first designed, it was targeted for a capacity of 400 tons per day. To meet customer demand in Washington D.C.’s Beltway district, Brian Shipp, one of the founders, streamlined their receiving bays and upgraded their waste handling machines to double their volume. Same-Day Cycles According to Shipp, “Everything that comes in here has to go out the same day. We only have 250 cu. yards of metal storage onsite and two bunkers for concrete.” Operating a large truck fleet, including roll-offs and large walking floor trailers, the compact facility is now taking on peak traffic of up to 60 trucks in one hour. Their shredder line simply cannot The reach on the machine allows operators to move in for a closer look, allowing them to efficiently sort and work the pile. stop. But the under-roof facility is a hot, dirty, dusty place for equipment to live day, the third unit is getting serviced. hydraulics and agile grapple allow a single machine to preand work in. No machine can be expected to keep up the “Our machines look terrible at the end of a week-long sort material while it keeps the shredder fed and producing. pace without full-time attention. Sun’s loading equipment shift.” Shipp said. “We rotate out one of the machines so it Due to Sun’s efficiency in reclaiming material, the firm is reflects that harsh reality. can get a thorough cleaning. We’ll do two or three rotations able to offer LEED credits for customer projects. Sun started out with a conventional fleet of wheel loaders between scheduled maintenance intervals.” and excavators, but those machines could not keep up with The Sennebogen machines are all equipped with Safe, Productive the growing demand. In early 2019, Shipp acquired his first hydraulic reversing fans. Shipp said they pause a few times The Sennebogen hydraulic Maxcab rises to 18 ft. and purpose-built Sennebogen 818 waste handler from each day to run the fans and clear the cooling system, then gives operators a clear view for fast, efficient loading into the Midlantic Machinery. they dig into the piles once more. shredder and load-out trucks. The cab is comfortable and a After seeing it perform, they added two more 818s later Ongoing Factory Service safe work space in an environment that doesn’t allow them that year. But only two of the new machines are operating at Meanwhile, factory-trained technicians from Midlantic to keep doors open. any given time. That’s the core of Sun’s full-time PM plan. are routinely onsite to maintain and inspect one of the waste “They’re big guys,” said Shipp. “But the cab gives them handlers. the room they need; the AC keeps up with the heat, and Bench Strength “Any gremlins we have had, Midlantic figured it out we’ve seen that it gives them good protection from falling To ensure that each machine gets the service attention it quickly.” debris.” needs to perform on demand, Sun keeps two units on the job, On the next rotation cycle, the technicians apply any With 4,000 hours on the original 818 and about 3,000 with another on the bench. adjustments they made to the other two machines, to prevent hours for the other two, Shipp said Sennebogen was the right “One 818 sits on top of the pile and feeds the shredder. the same problem from coming up again. Sun signed on for choice. While the shredder is processing, the loader can pre-sort Midlantic’s service plans, and Sennebogen’s built-in Sencon “They have been exponentially better than excavators we oversize items out of the stream, such as big concrete, metal, software keeps Midlantic aware of the machines’ service used previously,” Shipp said. “We’re very happy with them. cable, tanker vessels. Another 818 sits at the other end of the needs. When it comes time to open our next plant, we plan to build stream, loading out residual material.” The capabilities of the purpose-built material handlers our fleet with Sennebogen when the time comes.” While two of the 818s handle the workload of the 10-hour also helped Sun to expand its capacity. The 818’s responsive For more information, visit www.sennebogen-na.com. 

Page 16 • April 25, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING

MATERIAL HANDLING

SCREENING

Modern Machinery www.modernmachinery.com 4428 East Trent Ave. Spokane, WA 99212 800-541-0754

22431 83rd Ave. S. Kent, WA 98032 800-669-2425

19444 Ivan Street SW Rochester, WA 98579 800-304-4421

4610 Cloudburst Way Eugene, OR 97402 800-826-9811

TRACKS

5241 NE 82nd Ave. 101 International Dr. 3155 Highway 93 S. 7850 S. Frontage Rd. Portland, OR 97220 Missoula, MT 59808 Kalispell, MT 59901 Billings, MT 59101 800-950-7779 800-332-1617 800-434-4190 800-735-2589 Modern Machinery 4428 East Trent Ave. 22431 83rd Ave. S. 19444 Ivan Street SW 4610 Cloudburst Way 1257 West Amity 2735C Tucker Ct. 2666 Garrett Way Spokane, WA 99212 Kent, WA 98032 Rochester, WA 98579 Eugene, OR 97402 Boise, ID 83705 Jerome, ID 83338 Pocatello, ID 83201 800-541-0754 800-221-5211 800-669-2425 800-221-5211800-304-4421 800-829-4450 800-826-9811 5241 NE 82nd Ave. 101 International Dr. 3155 Highway 93 S. 7850 S. Frontage Rd. Portland, OR 97220 Missoula, MT 59808 Kalispell, MT 59901 Billings, MT 59101 800-950-7779 800-332-1617 800-434-4190 800-735-2589 1257 West Amity 2735C Tucker Ct. 2666 Garrett Way Boise, ID 83705 Jerome, ID 83338 Pocatello, ID 83201 Goodfellow Corporation 800-221-5211 800-221-5211 800-829-4450 goodfellowcorp.com www.modernmachinery.com 280 W. Valley Rd. 12451 Old U.S. 95 7780 N, Virginia St. 390 North 200 West 12639 W. Butler Dr. Rialto, CA 92376 Boulder City, NV Reno, NV 89506 Lindon, UT 84042 El Mirage, AZ 85335 89005 951-992-6698 775-971-9124 801-796-6126 480-285-8202 702-293-7504

WASHING & CLASSIFYING

Power Motive Corp.

Denver Headquarters 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900

Power Motive Corporation 2239 Commercial Blvd. 2340 I-70 Frontage Rd. 2600 Center Dr. Colorado Springs, CO 80906 www.powermotivecorp.com Grand Junction, CO 81505 Milliken, CO 80543 2600 719-576-5541 Center Dr. 7854 Hutchins Dr. 970-241-1550 970-587-1188 DENVER HEADQUARTERS Milliken, CO 80543 39 Kay 5000 Vasquez CO Hutchins 80216 Dr. Cheyenne, WY 82007 Cee Ln. Blvd., • Denver, 7854 970-587-1188 Durango, CO 81301 303-355-5900 Cheyenne, WY 82007 307-634-5149 970-259-0455 39 Kay Cee Ln. 307-634-5149 2340 I-70 Frontage Rd. 2239 Commercial Blvd. www.powermotivecorp.com Durango, CO 81301 Grand Junction, CO 81505 Colorado Springs, CO 80906 719-576-5541

970-259-0455

970-241-1550

The complete source for equipment in the aggregate, construction and recycling industries. Offering industry-leading brands such as the Pioneer Jaw Crusher, Kodiak® Plus Cone Crusher, SuperStacker® Extendable Stacker, ProSizer® Mobile Screening Plant, Combo® Screen, Vari-Vibe® High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, Global Track and FastPack.

www.kpijci.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 25, 2021 • Page 17

www.compassequi p q p.com ĽĿŁŁ Ť į Ę ľļĹĝľļļĝŀ ĝŀĻŁĽ į ľļĹĝľļļĝĝŁĿĺĹ

ě ě 323 Energy Wa Way Ę 940-683-4070 ŁĹĹ ļĺľ ĹŁŀĺ ŁĹĹĝļĺľĝĹŁŀĺ

Ę ŁļĹ ļŀĻ ŁļĹĝļ ļŀŀĻĻĝĺĺĺĹ ļŀ ĺĺĺĹ

ě ĝ ě ĺŀĻ ŀĻľ į Ę 480-476-6 76-6004

ě ě 800-779-4450 0 ĽŁłł Łłł ĻĺĹĹ Ļ ĹĹ ļĽŁ ľļĹĹ ľĹĽĹ Ę Ę

Ę Ę Ę

ě ě ŁĻĹŀ ĻĺĿ ĺľľĹ ĺĺłĻ łĻľľ Ę Ę Ę 206--7762-59 2-5933 ľĽĺĝļĹĻ ĹĻĝļŀĿ ŀĿĻ 503-2 -252-5933 ļľĺľ Ę Ę 509-534-5933

www.quinncompan ny.com Ť Ę Ę Ę ĿĿĺĝļłļĝľŁĹĹ łĽł Ľłĝŀ ĝŀĿŁĝĺŀŀŀ ŁĹľĝĽŁľĝĻ ĝĻĺŀĺ Ę Ę Ę Ę Ę 562-46 63-4 3-4000 ĿĿĺĝłĽĻĝĺĺŀŀ łľĺĝĿŁĿĝĽľ ĽľĿĹ Ę ŁĺŁĝŀ ĝŀĿŀĝŀĺŀĺ ŀĺ

ě ě ĺŁĹĹĹ į Ę į 30 3 3--7739-3000 Ę Ę Ę ŀĺłĝļĽĿĝŀŁ ĝŀŁŁĹ łŀĹ ŀĹĝĻ ĝĻŀĿ ŀĿĝļŀŁ ŀŁĺ ľĹľĝļĻŀĝ ŀĝľļļĺ Ę Ę Ę ŀĺłĝļłĹĝŀ ĝŀļĺĿ ŀĺłĝľĽĽĝĽĽļļ ľŀľ ŀľĝļłļĝĻ ĝĻĺĽŁ Ę Ę Ę łŀĹ ŀĹĝĻ ĝĻľłĝĻĹĹĺ łŀĹĝŁĽŁĝĻ ĝĻłĺĺ łĺľĝŁĻĺĝŀ ĝŀĿľĺ

Ę Ę Ę Ę 97070--24242--2834 28 łŀĹ ŀĹĝĻ ĝĻŀŁ ŀŁĝĺŀľ ŀľĹ ľĹľĝļĽľ ĽľĝŁĽĺĺ

ě ě ļŁĹł ļĺĻ į Ę į ŁĹĹ ŁĹĹĝłłłĝĿĿŀ łłł ĿĿŀ ĿŀĿ

Me etso Outotec has delivered dependable solutions for demanding agg gregate applications the past 150 years, including crushers, screens, fee eders, trackmounted and wheelmounted units, stationaryy plants and ě Ť ŏĘ ĺłŁĿĘ stilll in everyday use. Baccked by OEM spare and wear parts, maintenance and repairs, Ę perrsonally. ě ě

mogroup.com

Page 18 • April 25, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

FAE PT LINE: GET USED TO BEST IN CLASS

fae-group.com

(770) 407-2014 - info@faeusa.com

McCloskey International Unveils SF50 Feeder Stacker McCloskey International has introduced a new feeder stacker to its lineup: the SF50. Versatile in its use across industries, the SF50 feeder stackers facilitates the handling and stockpiling of materials including, but not limited to, aggregates, coal, C&D waste, sand and gravel, topsoil and compost. All can be fed into the hopper with large loaders and excavators, combining the efficiency of a high capacity hopper with a stacking conveyor. Variable speed prevents material from building up, allowing for more controlled flow of material, according to the manufacturer. The track mobility of the SF50 ensures the machine is versatile onsite. When moving site-to-site, the SF50 can be compacted for transport on a low loader, or loaded in a 40 ft. cube container, reducing costs and logistics. The SF50 is available in a variety of power options, including dual power, diesel/hydraulic, electric/hydraulic, diesel electric and diesel with genset. Key Features of the SF50 include:

• 50 ft. long main conveyor with 40 in. wide belt •Hydraulic folding heading section for transport, minimizing setup time. • Hydraulically adjustable discharge height up to 6.5 m • 3.5 m tracks for superior maneuvrability and stability • Fuel efficient hydraulics system. • User friendly hydraulic controls • Powered by a Cat 2.8 74 hp (55 kW) engine • Production up to 500 tph The SF50 also offers many options to align the equipment to the requirements of the owner/operator, including: • Hydraulic / manual tipping grid •Two deck vibrating grid with remote tipping • Complete remote functionality • Various hopper liners, including Hardox • Head scraper upgrade • Full skirting on main conveyor • Various belt types available For more information, visit www.mccloskeyinternational.com. 

The SF50 feeder stackers facilitates the handling and stockpiling of materials including, but not limited to, aggregates, coal, C&D waste, sand and gravel, topsoil and compost.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 25, 2021 • Page 19

Continuing Education is FREE!! Adjoining the 100,000 sq. ft. US headquarters just outside Charlotte, North Carolina, is the home of the SENNEBOGEN Training Center.

PURP POSE-BUIILT

FROM THE T GROUND D UP

Here, service tech hnicians, parts personnel and machine operatorss receive expert hands-on and classroom training absolutely free.

The two service level courses are designed to build on each other. Ou ur trainers p provide instruction on proper mainten nance procedures and system troubleshooting. The operator familiarization course was created d to help operators maximize the machine’s cap pabilities using best practices GPS FƌDJFODZ BOE E TBGFUZ 5IF QBSUT USBJOJOH course teaches parts counter teams how to better understand d the parts manuals for their SENNEBOGEN matterial handlers. According to SEN NNEBOGEN, there is no fee for course atten ndance or course material GPS 4&//&#0(&/ / EFBMFST TUBƋ BOE UIFJS customers. “Our objective is to create North America’s best-trrained service network and provide our custom mers with increased machine availability”, said Constantino C Lannes, President of SENNEBOGEN LLLC.

Available T Trainin ng Courses • Serrvic vice Level 1 • Serrvic vice Level 2

See how SENNEBOGEN can purpose-build the right machine m for you

• Parts Training • Operator Familiarization

www.sennebogen s sennebogen -na com | +1-7044-347-4910 -na.c

www.modernmachinery.com Kent, WA 253-872-3500

Pocatello, OR 208-233-5345

Jerome, ID 208-324-4522

Boise, ID 208-336-8570

Billings, MT 406-252-2158

Kalispell, MT 406-755-5540

Missoula, MT 406-523-1100

Eugene, OR 541-688-7321

Portland, OR 971-222-1710

Rochester, WA 360-273-4284

Spokane, WA 509-535-1654

Page 20 • April 25, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

When Using Reclaimed Asphalt Can Make the Difference Anyone with an ongoing road A Chilean company that specialconstruction project knows the ized in road construction services industry’s hurdles on any job scale, used an MB-L200 crusher bucket to from the reconstruction of a main recycle material, which was then road to a small side road. used as a sub-base: new material in The industry faces many chalno time and zero cost. lenges with high hauling and materiIn Brazil, a company used a al disposal costs while also protectBF70.2 crusher bucket to make ing the environment. The same reclaimed asphalt — RAP ready to restrictions also affect those who use on-site. process and distribute bituminous The material processed with MB conglomerates. Crusher equipment creates new busiMain obstacles? The high costs of ness opportunities in a single project, hauling and disposal of removed eliminating downtime, hauling and pavement material and the subsedisposing expenses. The landing quent cost of new aggregate. strips in Reykjavík, the largest airport “Every day that we work on a road in Iceland, were rebuilt by using the rebuilding project, we need to conold asphalt as a base material, due to sider the price of asphalt: once we the use of a BF70.2 crusher bucket. mill the old pavement, we need to Each MB Crusher bucket is haul and dispose of it. This process The landing strips in Reykjavík, the largest airport in Iceland, were rebuilt by using the old designed to adapt to all requirements impacts the overall costs, project asphalt as a base material, due to the use of a BF70.2 crusher bucket. of a job site easily: you can pair it duration, and our impact on the surwith any heavy equipment, it crushes In the words of an experienced foreman: any type of asphalt and hard material, it rounding environment,” a business owner mounted on any brand and sized heavy machinery right there on the job site, accord- Asphalt, bitumen and old sidewalk or city doesn’t require specialized mechanics for its said. Due to MB Crusher’s presence on job ing to the manufacturer. This transforms square pavement has become a valuable maintenance, and it works non-stop, accordsites worldwide, the manufacturer focused equipment into a powerful crusher. Any resource. We can reuse the material right ing to the manufacturer. on this weakness and transformed it into a asphalt can be crushed down to the required there and then, or sell it. With MB’s mobile MB Crusher attachments pave the way to size to be ready for immediate reuse, such as crushers, we increased our job’s margins and a new revenue stream and more attention to new advantage. have new business opportunities.” The secret? MB’s mobile crushers can be base material for a new road. the environment. 

Volvo Expands Material Handler Line With New Models Volvo Construction Equipment has launched the all-new EW200E material handler, aimed at the light waste handling segment. Its bigger brother — the EW240E material handler — is updated with a longer boom. “A dedicated material handler is purposebuilt for these applications, compared with modifying an excavator to fit into these segments,” said Matthew McLean, product manager, excavators, Volvo CE. “Now we’ve added a second machine to our lineup with the EW200E MH, which is perfect for light and medium material handling like plastic, household waste and scrap.” Engineered for Durability, Productivity The EW200E material handler weighs 22.6 tons and is powered by a Volvo D6J 6L Tier IV final engine that provides 173 hp (129 kW). The machine has three boom and arm configurations. The straight boom can be fitted with either a 13-ft. gooseneck arm or an 11-ft. 6-in. sorting arm, giving the EW200E a max reach of 33 ft. and a max lifting capacity of 25,600 lbs. The 26-ton EW240E material handler, introduced in 2018 for medium-duty applications, now has a 23-ft. 9-in. straight boom,

which is more than 2 ft. longer than the previous model. When combined with the existing 16-ft. 5-in. gooseneck arm, the new total reach is more than 39 ft.

ductivity, uptime and operator comfort: • Option of four stabilizers (front blade and rear outrigger as standard) • Cab can be raised more than 16 ft. above the ground • Cab has double-damped mounts to reduce noise

Additional Features The The EW200E MH EW200E shares many compomaterial hannents with the EW240E dler weighs 22.6 MH and other Volvo tons and is powered wheeled excavators. by a Volvo D6J 6-L Tier Hydraulics matched IV final engine that proto the Volvo engine vides 173 hp (129 kW). allows the machines to find the sweet spot between engine speed and hydraulic efficiency. The boom float function and boom cylinder dampening minimize vibration and and vibration hold the grapple in place for increased stabil• Outriggers, blade and cab-raising funcity. The grapple control and soft swing sys- tions can be completed without removing tem work together for instantaneous hands from joysticks response and smooth precision • Factory-installed auxiliary circuits In addition, Volvo material handlers offer enable sorting grabs and orange-peel grapapplication-specific features to increase pro- ples

• Adjustable arm-in and height limitations • Comfort Drive Control provides the ability to drive up to 12 mph using the roller on the joystick • Can be ordered without the steering column, which allows the operator to control the machine using only the joysticks • Auto idle and auto engine shutdown to help to reduce fuel consumption • Optional solid rubber tires • Optional waste package: protective screens and a reversible fan • Optional Smart View feature for bird’s eye view of machine The EW200E MH and EW240E MH are eligible for a free year of ActiveCare Direct, the Volvo telematics service that provides 24/7/365 machine monitoring and fleet utilization reporting directly from Volvo. They also are backed by the Volvo Lifetime Frame and Structure Warranty, which covers the frame, boom and arm for the entirety of the initial ownership period. For more information, visit volvoce.com/na. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 25, 2021 • Page 21

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

THE BEAST 2460XP Trrack Horizontal Grinder

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

MODEL B M BT BTC-300 Trrack Carri rie ier

A To Z Equipment Rentals & Sales www.a-zequipment.com M MODEL 3590XL W Whole Trree Chipper pp

North Valley 15634 N. 32nd Street Phoenix, AZ 85032 602-553-4839

Central Phoenix 4050 E. Indian School Road Phoenix, AZ 85018 602-954-3299

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

East Valley 1313 E. Baseline Road Gilbert, AZ 85233 480-558-0067

West Valley 677500 Millbrook Rd. • Remus, MI M 49340 • 1-800-952-0178 FIN FIND ND US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

MODEL SG-75 Trrackk Stump S p Grinder Gi d

803 E. Van Buren Street Avondale, AZ 85323 623-435-3078

Trucks & Trailers

SECTION

Pages 22-23

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Kenworth’s T880s Meet Challenge of Charah Solutions When Charah Solutions challenged Kenworth to meet its tough truck application specifications, the result was a success for its operations. “We had a wide range and mix of manufacturers’ trucks at different sites. I saw the need to come up with a better solution than anybody else had offered before,” said Gavin Nawrocki, fleet manager of Charah Solutions. “Kenworth advertises that they make the World’s Best trucks and I challenged them to do that.” Founded in 1987 and based in Louisville, Ky., Charah Solutions is a leading provider of environmental and maintenance services to the power generation industry. The company handles millions of tons of ash annually, which dramatically reduces the amount of ash sent to landfills and provides valuable recycled material. Today, Charah Solutions has operations in more than 50 coal-fired and nuclear power generation sites across the United States. “Cookie cutter trucks won’t work on our sites because of the off-road conditions we are faced with every day. We recognized we needed a severe duty, rigid frame truck that you could not just go to the dealer lot and buy. It would have to be engineered for us,” Nawrocki said. “I shopped around at all the different manufacturers and approached our local Kenworth dealer, [Palmer Trucks in Louisville]. We decided on Kenworth because they were the only company willing to engineer a truck specifically for us…for our application and our needs,” he said. “Like everybody else, we want to haul as much as we can. We knew our target goal was 40 tons on these trucks. So, for example, we had to have some super heavy duty rear ends, among other specifications. Kenworth was the only company that could do that at the factory level and not have to go aftermarket with a lot of add-on things,” he said. Today, Charah Solutions operates more than 100 Kenworth trucks. The lineup is led by 50 Kenworth T880 dump trucks — including some with PACCAR MX-13 engines. The T880s also are specified with Allison 4500RDS 5-speed automatic transmissions, PACCAR front axle and Meritor rear axles. The company expects delivery of 23 more T880s this year. The fleet also oper-

“We haul anywhere from 41 tons to about 46 to 48 tons a truck, depending on the weight and whether we are hauling wet or dry material,” said Travis Guillot, a Charah Solutions site supervisor.

ates four Kenworth C500s and a dozen Kenworth T370s. “We haul anywhere from 41 tons to about 46 to 48 tons a truck, depending on the weight and whether we are hauling wet or dry material,” said Travis Guillot, a Charah Solutions site supervisor at the company’s site in Lena, La. “We used to haul at this location with five trucks. It would take us from 15 to 20 loads per truck a day, and we worked six days a week. Since we went to the Kenworth C500,

we’re down here to about 10 loads per truck and operating five days a week, 10 hours a day. It cut down our hauling time big,” Guillot said. “We’re keeping up with the production at the plant, and minimizing the usage of our equipment, too. This material can do some damage when it gets wet and sticky. The C500 has been handling it.” “Absolutely what we wanted and what we needed. The Kenworth T880 and C500 have exceeded our expectations. Our maintenance

costs have been dramatically reduced. Driver retention has gone up. The Kenworths perform,” Nawrocki said. “Kenworth advertises that they make The World’s Best trucks. I challenged them to do that…and they did,” concluded Nawrocki. Charah Solutions is featured in a new video on the Kenworth YouTube site (www.youtube.com/watch?v=POKGRZTi5 Uc). For more information, visit www.kenworth.com. 

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • April 25, 2021 • Page 23

Mack Trucks Produces Its MD Series Trucks at Va. Facility Mack Trucks recently began initial pro- ability for tough urban settings. The MD duction of its all-new Mack MD Series of Series cab design features a short bumper-tomedium-duty trucks at its Roanoke Valley back-of-cab (BBC) measurement of 103 in. Operations (RVO) facility in the Roanoke Mack matched the bold look and styling Valley, Va. of the Mack Anthem, Mack’s highway Full production of the Mack MD Series model, as a basis for the grille and hood bean in September 2020. design found on the MD Series. The Mack Mack announced in January it had invest- MD Series will be supported by Mack’s ed $13 million to establish RVO to produce extensive dealer network. the Mack MD7, a class 7 model with a Gross For more information, visit www.mackVehicle Weight Rating (GVWR) of 33,000 trucks.com.  lbs., and the Mack MD6, a Class 6 model, with a GVWR of 25,995 lbs. Both models are exempt from the 12 percent Federal Excise Tax (FET). The new trucks will meet the needs of trucking applications requiring dry van/refrigerated, stake/flatbed, dump and tank truck vocations. Available in 4x2 configurations, the MD6 and MD7 The MD6 and MD7 models feature a sharp wheel cut models feature a sharp wheel for enhanced maneuverability for tough urban setcut for enhanced maneuver- tings.

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

=PZP[ ^^^ MLSSPUN JVT *,. ,THPS [YHPSLYZ'MLSSPUN JVT *HSS

IntercompWIM Delta Software Simplifies Inventory Tracking Intercomp, a manufacturer of portable vehicle weighing and measurement products, has made its IntercompWIM Delta software available to the global industrial scale market. The software is a stand-alone interface for customers to take advantage of the efficiency and cost-savings of Weigh-InMotion (WIM) technology while more accurately tracking bulk material inventory, in real time. IntercompWIM Delta automates weight collection to compare and calculate Gross/Net weights for vehicles hauling incoming and outgoing goods. IntercompWIM Delta compares records with matching vehicle IDs to calculate net, tare and gross weights. The system utilizes those values to determine the weight of incoming and outgoing materials. This data is then able to be forwarded to a third-party inventory software for real-time tracking or exported to a spreadsheet. Vehicle usage and overweight alerts also are saved and can be recalled or exported for later use. IntercompWIM Delta’s ability to control scales monitoring up to two lanes of traffic — for example, a dedicated inbound and outbound lane — simplifies how WIM scale technology is utilized for daily operations of nearly any type of business. When paired with IntercompWIM scales, the software completes a stand-alone system for small or large facilities. The software is available for purchase through any scale dealer that sells Intercomp’s line of Weigh-In-Motion (WIM) Strip Sensors, LS-WIM and portable LS630-WIM using a PC. IntercompWIM Delta automates weight collection to compare and calculate Gross/Net weights for vehicles hauling incoming and outgoing goods. For more information, visit intercompcompany.com. 

Page 24 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 25

Larger control valve and electronic controls deliver smooth, precise performance and up to 12% faster cycle times

Bane Machinery 2449 Manana Drive Dallas, TX 75220 800-594-BANE (2263) 10505 North Freeway Fort Worth, TX 76177 800-601-BANE (2263)

Shift-long comfort from a spacious cab, automotive-grade seat and ergonomically-designed, fullyadjustable arm rests

3402 E. NE Loop 323 Tyler, TX 75708 800-594-2200 www.banemachinery.com

Cisco Equipment 1706 S. 1st Street Artesia, NM 88210 800-748-1846 2707 Slaton Hwy. Lubbock, TX 79404 877-745-9595 520 SE Loop 338 Odessa, TX 800-657-3673 620 N. Bell Street San Angelo, TX 76903 800-496-0271 www.cisco-equipment.com

Award-winning Wide Angle Visual Enhancement System (WAVES) provides seamless 270° panoramic view

Ground-level access to routine service points cuts daily maintenance down to just minutes

Oklahoma Territory Construction Equipment 3839 West Reno Ave. Oklahoma City, OK 73107 405-917-9191 866-339-6827 2520 E King Street Tulsa, OK 74110 918-835-7200 866-334-6827 www.oklahomaterritoryequipment.com

Triad Machinery 1601 E. Bay Street Tacoma, WA 98421 253-722-5600 910 N. Thierman Road Spokane Valley, WA 99202 509-534-1900 1210 Dale Lane Mt. Vernon, WA 98274 360-488-3948 4440 SW Airport Road Prineville, OR 97754 888-662-2940 91251 Coburg Industrial Way Coburg, OR 97408 541-342-7700

Tier 4 Final engines deliver up to 12% improved fuel economy…and no DPF to maintain

Robust undercarriage with innovative side-frame design is easier to clean

Nueces Power Equipment 7667 N Sam Houston Parkway Humble, TX 77396 713-247-0066 www.nuecespower.com

18200 NE Riverside Parkway Portland, OR 97230 800-221-8512 www.triadmachinery.com

Page 26 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Attachment & Parts Pages 27-32

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Epiroc Adds CB 5500, CB7500 Concrete Busters The new CB 5500 and CB 7500 models offer cracking forces of 165 and 209 tons (150 and 190 t), respectively.

A productive feature on all CB Concrete Busters is 360-degree endless hydraulic rotation, which allows precise handling and optimal positioning.

Epiroc is now adding two new models to its CB Concrete Buster range. The CB 5500 and CB 7500 are designed for carriers in the 50 to 85 tons (45 to 77 t) weight class. Due to their comparatively light weights, CB Concrete Busters are effective choices for use with high reach or long front carriers. For applications with highly abrasive material and low level of visibility of the product in operation. They also are suitable where noise is an issue and they can be used in residential areas where hydraulic breakers are not permitted. As construction and demolition contractors worldwide have discovered, CB Concrete Busters with their wide jaw openings and high cracking forces, are ideal for

demolishing thick foundation walls and they make light work of cracking girders and heavy concrete at extreme heights, according to the manufacturer. Designed With Productivity in Mind CB Concrete Busters are equipped with two powerful hydraulic cylinders, which deliver virtually continuous closing force for maximum productivity. The hydraulic cylinders are fully protected by piston rod guards. An integrated speed valve gives faster working cycles. Offering cracking forces of up to 190 tons (172 t) depending on the model, CB Concrete Busters are equipped with two independently

moving jaws that eliminate displacement force, thus lowering stress levels. Cutting blades are both replaceable and reversible. A productive feature on all CB Concrete Busters is 360-degree endless hydraulic rotation, which allows precise handling and optimal positioning. If the cutter grips the material at an oblique angle a built-in pressure relief valve allows

a “self acting movement” that brings the cutter jaw into the ideal position. This valve effectively protects both the carrier and the cutter from potentially damaging reaction forces. Full Range The new CB 5500 and CB 7500 models offer cracking forces of 165 and 209 tons (150 and 190 t),

respectively. Jaw openings for the two models are 63 and 71 in. (1,600 and 1,800 mm.) The complete CB range now comprises six models with service weights from 705 to 16,314 lb. (320 to 7,400 kg), for carriers weighing from 2.2 to 93.6 tons (2 to 85 t). For more information, visit www.epiroc.com. 

Page 28 • April 25, 2021 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

Power-Mixer Attachments...

ALLU Group Inc. Announces Keystone Drill Services Inc. as Its Newest Dealer ALLU Group Inc. announced Keystone Drill Services Inc., with headquarters in Somerset, Pa., as its newest dealer of the ALLU Processor line. Keystone will provide sales, parts and service for ALLU’s power-mixer attachments to customers primarily in the western United States. The ALLU Processor is a hydraulic power-mixer attachment that converts a conventional excavator into a powerful and versatile mixing tool capable of penetrating and effectively mixing a variety of difficult materials — everything from clay, silt, peat, sludge and sediment, to dredged material and contaminated soil, according to the manufacturer. Applications for this tool include site remediation, soil sta-

bilization and contaminated soil treatment. Founded in 1985, Keystone Drill Services provides products and services to the oil and gas, foundation/construction, elevator shaft, water well, blast hole, ground engineering, industrial power plant, pipeline, horizontal boring and directional drilling industries. With a corporate philosophy of “24/7 service,” Keystone ensures that its customers have the ability to reach a qualified person at any time, according to the company. ALLU Group Inc. Vice President Marketing Edison Rocha said, “The ALLU Processor line is a simple solution for a highly technical application, which requires knowledge of this application to help customers to succeed. We believe Keystone has the experience, knowledge, customer relations reputation and capacity to offer the support these customers need.” “Keystone Drill Services, Inc., is extremely excited to be representing the ALLU Soil Stabilization quality lineup of equipment,” said Scott A. Slater, chief executive officer of Keystone Drill Services Inc. “After meeting the ALLU personnel and seeing their equipment at the 2020 ConExpo-Con/AGG show, we all agreed that this niche product provides new opportunities for our customer base needs, and it coincides perfectly with the support of Keystone.” For more information, visit www.allu.net. 

Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • April 25, 2021 • Page 29

Page 30 • April 25, 2021 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

Komatsu Reengineers XT-5 Family of Tracked Feller Bunchers To better meet customer needs, Komatsu is upgrading its XT-5 family of tracked feller bunchers, adding performance and operator improvements, as well as covering the machines with a special 2-year/5,000-hour warranty program. The XT430-5, XT445L5 and XT465L-5 models were introduced in 2018, and these advancements were made based on customer feedback. Komatsu XT-5 machines let customers travel, operate the swing, arm and tool simultaneously, for maximum usability. To further boost multi-functioning performance for its customers, Komatsu added 7 percent more horsepower (331 hp vs. 310 at launch) to the Cummins QSL9 engine and increased the hydraulic flow, while maintaining excellent fuel efficiency, according to the manufacturer. Travel speed was increased by 25 percent to further improve productivity. The XT445L-5/XT465L-5 models now reach 3.3 mph (5.3 kmh); the XT430-5 model, 3.2 mph (5.1 kmh). Added lighting elements improve nighttime visibility of the right track and when using the rear camera, for a total of 13 LED lights brilliantly illuminating nighttime operations. “Working with, listening to and responding to customers is the cornerstone of our

To further boost multi-functioning performance for its customers, Komatsu added 7 percent more horsepower (331 hp vs. 310 at launch) to the Cummins QSL9 engine and increased the hydraulic flow.

product development process, so when they said that our XT-5 machines would be even better with a boost in speed and multi-functioning performance, we got to work,” said Todd Miyake, vice president, forest division, Komatsu America Corp. “We have also added a special 2-year or 5,000-hour warranty for a limited time period to offer customers an exceptional combi-

nation of performance, efficiency and peace of mind.” The special warranty program covers new XT430-5, XT445L-5 and XT465L-5 tracked feller bunchers purchased through March 31, 2021, as well as those purchased since launch. This coverage is in addition to the standard Komatsu CARE coverage which includes 100-, 500-, 1000-, 1,500-

and 2,000-hour maintenance services for the first three years or 2,000 hours, whichever occurs first. All of these services are performed using genuine Komatsu filters and fluids. The XT430-5, XT445L-5 and XT465L-5 Komatsu tracked feller bunchers were introduced in 2018 and were totally reengineered. Highlights include: • Outstanding serviceability with all service points easily accessible and gull-wing hood engine access • Increased power, torque — even while using up to 5 percent less fuel • Increased lift capacities and the ability of the XT465L-5 to readily operate the Quadco 24-in. (61 cm) cutting capacity disc saw head • Left-positioned modern forestry cab with exceptional visibility and comfort • Customizable operator controls via IQAN-MD4 digital control system • Komtrax remote equipment monitoring and management telematics system, which can improve operator productivity and monitor machine health, a valuable tool for scheduling preventative maintenance and service For more information, visit www.komatsuforest.us. 

Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • April 25, 2021 • Page 31

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

Modern Machinery

Waukesha-Pearce Industries, Inc. www.wpi.com

12320 South Main Street Houston, TX 77035 713-551-0506 Austin 512-251-0013

Beaumont 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275

Edinburg 956-386-0107 Kilgore 903-984-2011 San Antonio 210-648-4444

Tomball 281-351-9016

www.modernmachinery.com 4610 Cloudburst Way Eugene, OR 97402 800-826-9811 541-688-7321 Portland, OR 971-222-1710

Rochester, WA 360-273-4284 Kent, WA 253-872-3500 Spokane, WA 509-535-1654

Kalispell, MT 406-755-5540 Missoula, MT 406-523-1100 Billings, MT 406-252-2158

Boise, ID 208-336-8570 Jerome, ID 208-324-4522 Pocatello, ID 208-233-5345

Page 32 • April 25, 2021 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engine eered and y that p prov vides safer and feature the Ultralo ok® tooth system easier tooth repla acement. Combined with premium p m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

Ultra alok® Tooth o S stem System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades ess™ Cutting Edges s and a Acce essories

KIRBY-SMITH MACHINERY INC. WWW.KIRBY-SMITH.COM ABILENE, TX • 877-577-5729 AMARILLO, TX • 800-283-1247 DALLAS, TX • 800-753-1247 FT. WORTH, TX • 877-851-9977 HEWITT (WACO), TX • 254-261-1370 LUBBOCK, TX • 866-289-6087 MCALESTER, OK • 918-310-1550 ODESSA, TX • 877-794-1800 OKLAHOMA CITY, OK • 800-375-3339 TULSA, OK • 800-375-3733

www.esco.weir

MODERN MACHINERY WWW.MODERNMACHINERY.COM MISSOULA, MT • 800-332-1617 BILLINGS, MT • 800-735-2589 BOISE, ID • 800-221-5211 COLUMBIA FALLS, MT • 800-434-4190 EUGENE, OR • 800-826-9811 JEROME, ID • 800-221-5211 KENT, WA • 800-869-2425 POCATELLO, ID • 800-829-4450 PORTLAND, OR • 800-950-7779 ROCHESTER, WA • 800-304-4421 SPOKANE, WA • 800-541-0754

NORTHWEST PARTS AND EQUIPMENT WWW.NWPARTS.COM COLUMBIA FALLS, MT • 406-892-1778 MISSOULA, MT • 406-543-4800 BUTTE, MT • 406-782-5650

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 33

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com

12320 S. Main Street • Houston, TX 77035 • 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

www.kirby-smith.com

KIRBY-SMITH MACHINERY INC. 6715 W Reno Avenue • Oklahoma City, OK 73137 • 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

AUTOMA MAT TED TO MAKE THE PRODUCTION N YOU NEED

www.clairemontequipment.com

CLAIREMONT EQUIPMENT 7651 Ronson Road, San Diego, CA 92111 • 858-278-8351 1330 W Mission Road, Escondido, CA 92029 • 760-739-9100 8520 Cherry Avenue, Fontana, CA 92335 • 909-429-9100 440 West Aten Road, Imperial, CA 92251 • 760-355-7700 81-501 Industrial Place, Indio, CA 92201 • 760-863-5558 4726 Convoy Street, San Diego, CA 92111 • 858-278-8338

www.roadmachinery.com

ROAD MACHINERY LLC Phoenix, AZ • 480-545-2400 Phoenix, AZ • 602-252-7121 Prescott, AZ • 928-778-5621 Tucson, AZ • 520-623-8681 Bakersfield, CA • 661-695-4830 Hayward, CA • 510-659-1903 Fresno, CA • 559-834-3149 Mojave, CA • 661-824-2319 Perris, CA • 909-355-3600 Pico Rivera, CA • 562-699-6767 Redding, CA • 530-229-3820 Sacramento, CA • 916-375-3540 Santa Rosa, CA • 707-544-4147

POWER MOTIVE CORPORATION

www.powermotivecorp.com

DENVER HEADQUARTERS 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900 Colorado Springs, CO • 719-576-5541 Durango, CO • 970-259-0455 Grand Junction, CO • 970-241-1550 Milliken, CO • 970-587-1188 Cheyenne, WY • 307-634-5149

Want to make your next machine acquisition really count? nt? Komatsu’s lineup of aautomated excavators, including thee all-new PC360LCi-11 and PC490LCi-11 490LCi-11 feature a revolutionary, faactory integrated, machine control system. The exclusive intelligent ligent Machine Control tecchnology lets operators focus on moving oving materials efficiently, without worrying about digging tooo deep or damaging the target surface. Contact your Komatsu distributor tributor to learn how you cann hit pay dirt today with Komatsu innovation. novation.

020

Page 34 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Work Ramping Up, But So Are Costs COSTS from page 1

Of civil contractors who are concerned about cost increases in the next six months, the survey asked which materials they are most concerned about. “By far, steel is the material most frequently selected by contractors,” Civil Quarterly reported. “Nearly half [45 percent] are highly concerned about the possibility of cost increases for steel.” The price of steel was already high after the Trump administration’s 25 percent tariff on foreign shipments. Construction rebirth has sent costs soaring. The survey found there is also concern about the rising cost of pavement, concrete and aggregates as well as lumber and piping. The National Association of Home Builders (NAHB), tracking lumber prices, noted a jump from $500 per thousand board feet in October to more than $1,100 per in April. NAHB reported the average price of a new single-family home to increase by more than $24,000 as a result. Left in the Dust According to the Associated General Contractors (AGC), at the pandemic’s one-year mark, member construction firms were fighting continued project deferrals and cancellations. This in addition to dramatically rising material costs and supply chain headaches, the association reported in March. AGC pushed for the feds to eliminate materials tariffs, address shipping backups and boost funding for new infrastructure. “The survey results make it clear that the construction industry faces challenges that threaten to leave many firms and workers behind,” said Ken Simonson, chief economist of AGC. “Even as some parts of the economy are recovering or even thriving, the pandemic has left the supply chain for key construction components in tatters and undermined demand for a host of private-sector projects.” He noted that 93 percent of an association survey’s respondents report the pandemic has driven up their costs. Four out of five are spending more on personal protective equipment, sanitizers and other health-related expenses. More than half say that projects are taking longer than previously. “Costs and delayed deliveries of materials, parts and supplies are vexing many contractors,” said Simonson. Nearly 85 percent said costs have increased over the past year, and about three-fourths were experiencing project delays and disruptions. They blame shortages of materials, equipment or parts, and nine out of 10 cite backlogs and shutdowns at domestic producers and fabricators. The prevalence of those shortages varies by project type. Approximately six out of 10 building contractors reported shortages of materials, equipment or parts. Five out of 10 firms doing utility infrastructure or federal and heavy construction and four out of 10 highway contractors saw shortages. In contrast, approximately one out of three firms reported any cost savings as a result of the pandemic. Most of those cited reduced travel costs, while only 5 percent cited new or expanded use of jobsite techniques or technologies. Half of the firms also blame backlogs or shutdowns at foreign producers for backlogs and disruptions. More than three-fourths report projects canceled or post-

poned in the past year. That includes more than one out of five with a 2021 project that has been canceled or postponed. Only one-fifth of respondents said they have won new projects or add-ons to existing projects as a result of the pandemic. Approximately a third of firms said business matches or exceeds year-ago levels, while another third said it will take more than six months to reach that mark. One-fifth of respondents to AGC’s survey said they don’t know. Contractors in the northeast are the most pessimistic, followed by firms in the south, reported AGC. In the midwest, respondents are split along the same lines as the full survey, while respondents in the west are more optimistic, on balance. “Contractors from all regions, project types and firm sizes are almost equally bullish about their hiring expectations over the next 12 months,” reported AGC. Roughly three out of five expect to add employees over the coming 12 months. Only 10 to 15 percent of firms in any category expect to reduce their headcount. “Contractors need Washington officials to cut tariffs and address the shipping and supply chain problems driving costs and contributing to project delays,” said Brian Turmail, AGC’s vice president of public affairs. “They also expect the President will keep his word and get significant new infrastructure investments enacted as quickly as possible.” Price Check The AGC is closely tracking material prices and supply chain disruptions to analyze potential threats to construction firms. The association reported that a major producer notified customers of a further $50/ton jump in structural steel prices in mid-April. The producer also posted a $100/ton hike for HHS, pipe, mechanical and piling products the next day, according to the April AGC Data Digest. That same day, a supplier of fiberglass equipment stated that crippling shortages of raw materials were forcing major suppliers to declare “force majeure.” “An unprecedented leap in the price of goods and supplychain disruptions are wreaking hardships on contractors and slowing projects,” noted the association. The AGC lobbied the Biden administration to end tariffs and quotas on imported construction materials to ease the domestic supply chain. “Today’s report documents just some of challenges contractors are experiencing,” said Simonson. Challenges with fast-rising materials costs, lengthening or uncertain delivery times and rationing of key inputs are the issues he cited. “These problems threaten to drive up the cost and completion time for many vital projects and potentially set back the recovery in construction employment.” Simonson noted prices for construction materials and services and contractors’ bids dropped at the pandemic’s start but diverged in the past year. A government measure of the selling price for construction goods jumped 3.5 percent from February to March and 12.9 percent since March 2020. Simonson reported “both the monthly and yearly increases were the highest recorded in the 35-year history of the series.”  CEG

KOBELCO-USA.COM

Westrax Machinery 19618 S. Susana Rd. Rancho Dominguez, CA 90221 800-411-4717 611 N. Golden Key St. Gilbert, AZ 85233 602-397-8173 www.westraxmachinery.net

Orion Equipment 18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

TRI-WEST TRACTOR 6281 Southfront Rd. Livermore, CA 94551 925-455-8200 www.tri-westtractor.com

APCO Equipment 3432 N 5th Street North Las Vegas, NV 89032 702-871-7474 www.apcoequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 35

Scott Equipment 14635 Valley Blvd. Fontana, CA 92335 909-822-2200 • 800-316-0327 www.scottequip.com

BANE MACHINERY, INC. 2449 Manna Rd. Dallas, TX 75220 214-352-2468

Tyler, TX 903-597-6641 www.banemachinery.com

Fort Worth, TX 817-847-5894

Beard Equipment Co., Inc. 4509 I-20 Frontage Midland, TX 79706 432-694-4530 www.beardequipco.com

Page 36 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Officials Allocate Millions in Funding The California Transportation Commission (CTC) recently allocated $491 million to address transportation needs throughout the state. This investment, which includes $273 million generated from Senate Bill (SB) 1, the Road Repair and Accountability Act of 2017, will repair highways and bridges and improve California’s growing network of mass transit, bicycle and pedestrian routes. “These critical investments will help improve California’s transportation infrastructure now and into the future,” said Caltrans Director Toks Omishakin. “This includes improving safety and access for motorists, bicyclists and pedestrians, and planning for the long-term maintenance of these vital assets.” Additionally, Caltrans awarded more than $227 million to fund safety projects designed to reduce traffic deaths and serious injuries on city and county roads. Funding is provided through the federal Highway Safety Improvement Program (HSIP). This brings the total to $718 million for future projects. “A total of 48 safety improvement projects were funded in Los Angeles and Ventura counties,” said Tony Tavares, District 7 director. “Whether you walk, bike, use transit, or drive to work, this significant investment shows our commitment to providing Californians a safer transportation system throughout our local communities.” District 1: Eureka Projects approved include: • Approximately $11.8 million for slide repairs along U.S. 101 in Del Norte County north of the Cushing Creek Viaduct, including the construction of a ground anchor and retaining wall. District 2: Redding No current project updates District 3: Marysville Projects approved include: • Sacramento County: $31.5 million was allocated for various pavement and roadside rehabilitation projects on Interstate 80 (I-80), State Route 51 (Capital City Freeway) and State Route 244 which serves as a connector between I80 and the Capital City Freeway. Improvements also include vegetation control, the construction of maintenance vehicle pullouts and utility box relocation. • Sacramento County: $12.6 million for the American River Bridge Rehabilitation project that will remove, replace and widen the existing concrete bridge deck, and add a bike path from levee to levee. District 4: Bay Area/Oakland No current project updates. District 5: San Luis Obispo/Santa Barbara Projects approved include: • An $11 million allocation to rehabilitate the Garrapata Creek Bridge on Highway 1 in Monterey County with the application of an Electrochemical Chloride Extraction and waterproofing of the structure. • A $6 million allocation to replace two bridges near the Refugio Overcrossing on U.S. 101 in Santa Barbara County. • A $5 million allocation to build a tieback wall, restore the roadway, improve drainage facilities, and install permanent erosion control measures on State Route 236 near Boulder Creek in Santa Cruz County.

District 6: Fresno/Bakersfield Projects approved include: • Roadway Rehabilitation project on State Route 145 in Fresno County: $6.9 million will rehabilitate pavement by grinding roadway and overlaying with rubberized asphalt from Kamm Avenue to Manning Avenue. • Traffic Management Program Repair project in Fresno, Kern, Kings, Madera and Tulare Counties: $4.5 million will repair transportation management system (TMS) elements throughout District 6. This project will help reduce congestion and improve operational efficiency.

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT www.oklahomaterritoryequipment.com Oklahoma City, OK 405-917-9191 Tulsa, OK 918-835-7200

Garton Tractor Inc. www.gartontractor.com

District 7: Los Angeles Projects approved in Los Angeles County include: • Americans with Disabilities Act (ADA) Improvements, $23.5 million: In various cities, from 1.4 mi. west of Sunland Boulevard to Base Line Road; reconstruct curb ramps to meet ADA standards, install accessible pedestrian signals [APS]; and detectable warning surface, and relocate pull boxes and traffic signal poles. District 8: San Bernardino/Riverside Projects approved include: • City of Calimesa/RCTC, County Line Road Transportation Corridor: In the cities of Calimesa and Yucaipa on County Line Road, between Park Avenue and Bryant Street, the project proposes to construct four singlelane and one multi-lane roundabouts, together with street, pedestrian, and bicycle improvements ($3.74 million). District 9: Bishop Projects approved include: • Chain Control Turnout Improvements: In Mono County on U.S. 395 at various locations, and on U.S. 6 at approximately 7 mi. north of Bishop, this project will construct two new chain control turnouts and improve several existing chain control turnouts by widening and lengthening the pavement area and constructing a median cross-over. District 10: Stockton Projects approved include: • A project that will repair or replace damaged and nonfunctioning traffic management system (TMS) elements In San Joaquin, Amador, Calaveras, Merced, Mariposa, Stanislaus and Tuolumne Counties, on Routes 4, 5, 26, 33, 49, 59, 99, 104, 108, 120, 132, 140, 152 and 205 at various locations received nearly $4 million. This project will help reduce congestion and improve operational efficiency. District 11: San Diego Projects approved include: • $36.6 million to Caltrans District 11 and the San Diego Association of Governments for new service utilities, utility relocation and ancillary work as part of construction of the future Otay Mesa East Port of Entry. District 12: Orange County Projects approved include: • I-5 in Anaheim, from 0.2 mile north of Anaheim Boulevard to Santa Ana Street. The purpose of this $2.2 million project is to enhance highway worker safety by upgrading access trails and access gates, relocating facilities away from traffic, and installing features to reduce repetitive maintenance activities. 

2400 N Golden State Blvd. • Turlock, CA 95382 209-632-3931 Fairfield, CA • 707-425-9545 Merced, CA • 209-726-4600 Modesto, CA 95356 • 209-538-0911 Newman, CA • 209-862-3760 Santa Rosa, CA • 707-586-1790 Stockton, CA 95206 • 209-948-5401 Tulare, CA 93274 • 559-686-0054 Ukiah, CA 95482 • 707-468-5880

CLM EQUIPMENT CO. INC. www.clmequipment.com Lafayette, LA 337-837-6693 Lake Charles, LA 337-625-5942 Houston, TX 281-598-2500

BANE MACHINERY INC. www.banemachinery.com Dallas, TX 800-594-2263 Ft. Worth, TX 800-601-2263 Tyler, TX 800-594-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 37

Hitachi’s after sales solutions provide you with all the tools you need to manage your total cost of ownership quickly and easily, whenever and wherever you are. Utilize Hitachi’s Technology Programs and Apps to: ࠮ ,_[LUK LX\PWTLU[ SPML ࠮ 4HUHNL WYL]LU[H[P]L THPU[LUHUJL THJOPUL LɉJPLUJ` HUK VWLYH[VY WYVK\J[P]P[`

࠮ 4HUHNL `V\Y VWLYH[PUN JVZ[Z M\LS JVUZ\TW[PVU HUK VWLYH[VY LɉJPLUJ` PU [OL ÄLSK

*VU[HJ[ `V\Y SVJHS /P[HJOP ÔLLS SVHKLY KLHSLY VY ]PZP[ \Z H[ OP[HJOPÔLLSSVHKLYZ \Z `V\Y[VVSZ [V SLHYU TVYL HIV\[ [OL MVJ\ZLK /P[HJOP HWWYVHJO [V Z\WWVY[PUN `V\ `V\Y I\ZPULZZ HUK `V\Y /P[HJOP ÔLLS SVHKLYZ

Cooper Equipment Co. www.cooperequip.com 201 Commerce Blvd. Georgetown, TX 78626 512-930-5151

REPUTATIONS ARE BUILT ON IT

TRI-WEST TRACTOR, INC. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

A FULL LINE OF WHEEL LOADERS

• 14 Models • 25 HP – 520 HP

Hitachi Construction Machinery Loaders America Inc. hitachiwheelloaders.us/yourtools

Westrax Machinery www.westraxmachinery.net

Shafer Equipment Company, Inc.

19618 S. Susana Rd. Rancho Dominguez, CA 90221 800-411-4717

www.shaferequipmentco.com

Dealer Imprint Area

955 Greg Street • Sparks, NV 89431 775-235-4069

19885 Temescal Canyon Rd Corona, CA 92881 800-411-4717

APCO EQUIPMENT www.apcoequipment.com 3432 N 5th Street North Las Vegas, NV 89032 800-574-4089

BEARD EQUIPMENT CO. www.beardequipco.com 4509 I-20 • Midland, TX 79706 432-694-4530

611 N. Golden Key St. Gilbert, AZ 85233 602-397-8173

Rasmussen Equipment Co. www.raseq.com 3333 West 2100 South West Valley City, UT 84119 801-972-5588

Page 38 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Air Compressor Solutions, Inc.

Ditch Witch of Arizona

Ditch Witch of Southern Arizona

www.acsir.com

www.ditchwitchaz.com

Odessa (432) 335-5900 Amarillo (806) 383-1213

Phoenix (602) 437-0351

Tucson (520) 579-0261

TEXAS

ARIZONA

Sierra Machinery, Inc. www.sierraelpaso.com

TEXAS

El Paso (915) 772-0613

NEW MEXICO Artesia (575) 746-6592

Volvo Construction Equipment & Services www.vcesvolvo.com

CALIFORNIA

Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244

San Diego/ Lakeside (619) 441-3690 Corona (951) 277-7620

MAKE POWER MOVES.

Papé Material Handling Inc.

OREGON

Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

www.papemh.com

NEVADA

Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386

Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 39

A FULL LINE OF EQUIPMENT & PRODUCT SUPPORT SOLUTIONS FOR ALL YOUR ROAD BUILDING NEEDS. We don’t build roads. We make the equipment so you can cost-effectively build and maintain the world’s roads. With the Roadtec heavy-duty design, we are able to keep your machine working longer while lowering maintenance and operating costs. We also make your operators more comfortable and confident with our user-friendly design and our customization for special projects.

www.goodfellowcorp.com

www.roadtec.com

www.powermotivecorp.com

280 W. Valley Rd. Rialto, CA 92376 951-992-6698

390 N. 2000 W. Lindon, UT 84042 801-669-0388

5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

12451 Old Hwy. 95 Boulder City, NV 89005 702-296-6553

12639 W. Butler Drive El Mirage, AZ 85335 480-285-8202

Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550

1.800.272.7100

+1.423.265.0600

www.modernmachinery.com

Milliken, CO 970-587-1188

Missoula, MT 800-332-1617

Eugene, OR 800-826-9811

Portland, OR 800-950-7779

Durango, CO 970-259-0455

Billings, MT 800-735-2589

Jarome, ID 800-221-5211

Rochester, WA 800-304-4421

Cheyenne, WY 307-634-5149

Boise, ID 800-221-5211

Kent, WA 800-869-2425

Spokane, WA 800-541-0754

Columbia Falls, MT 800-434-4190

Pocatello, ID 800-829-4450

Page 40 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Three New Companies Now Offering SEAA/NCCER Craft Training Programs The Steel Erectors Association of America announced that it has continued to expand its member network of companies which delivers the SEAA/NCCER Ironworker Craft Training and related programs. Since late 2020, three new companies can now offer SEAA/NCCER training and assessments. These companies are Wennersten Construction Inc., Mesa, Ariz.; SCW Contracting Corp., Fallbrook, Calif.; and Hamilton Tree Service Inc., Martinez, Calif. “The SEAA/NCCER training program affords companies access to premium training and workforce development tools that otherwise might be out of reach for small and medium sized contractors,” said Tim

The SEAA/NCCER training program affords companies access to premium training and workforce development tools that otherwise might be out of reach for small and medium sized contractors.

Eldridge, president of Education Services Unlimited and SEAA’s Craft Training and Assessment administrator. While many SEAA members utilize the ironworker curriculum, others also employ NCCER’s crane operator and rigger programs. “Training units and

assessment sites are not limited to a single craft area. More than 60 crafts are available through NCCER,” said Eldridge. “The assessment and evaluation program enables us to determine the individual level of trade knowledge and skill each team member has so we can focus on the areas where we

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

SEE YOUR BARGAIN AD IN COLOR.

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 9-10 EB

ONLY $60 EXTRA FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

can provide additional training and educational support,” said Kirt Bjoin of SCW Contracting. Chase Wennersten, owner of Wennersten Construction, said that participation in the program does more than just qualify employees. “This takes it to the next level, by enabling our employees to get certified,” he said. “To encourage members to establish SEAA/NCCER craft training, the Safety & Education Committee funds grants for the start up of new programs. Since 2014, approximately $27,000 have been awarded to companies,” said Bryan McClure, chairman of the Safety & Education Committee. The network now includes 26 active accredited training units and assessment sites. An additional $17,000 has been earmarked for the development of supplemental training videos. Financial support for grants are primarily funded through an annual golf tournament. The 2021 Dave Schulz Memorial Golf Tournament, supporting safety, training and education, will be held Oct. 12 in Orlando, Fla. For more information on the craft training program or grants, visit https://www.seaa.net/crafttraining.html. 

ALASKA

IDAHO

NC MACHINERY www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 07-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400

WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Caldwell • 208-350-6334 Hayden • 208-762-6690 Idaho Falls • 208-552-2287 Lewiston • 208-746-3301 Meridian • 208-888-2287 Pocatello • 208-232-2640 Twin Falls • 208-734-7330

CALIFORNIA HOLT OF CALIFORNIA www.holtca.com Pleasant Grove • 916-921-8969

COLORADO WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora • 303-739-3000 Denver • 303-433-2727 (Rental) Carbondale • 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs • 719-635-1669 719-390-7316 (Rental) Granby • 970-328-2080 (Rental) Gypsum • 970-328-2080 (Rental) Hayden • 970-276-3781 Silverthorne • 970-262-3788 (Rental) Fort Collins • 970-493-5005 (Rental) Grand Junction • 970-242-2834 970-245-6546 (Rental) Pueblo • 719-544-4433 719-544-0088 (Rental) Steamboat Springs 970-871-1990 (Rental) Windsor • 970-278-1750 (Rental) Burlington • (719) 346-5132 719-346-7880 (Rental) Durango • 970-259-2001 970-259-2001 (Rental) Windsor • 970-278-1750

NEVADA CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway Henderson, NV 89052 702-649-8777 Elko • 775-738-9871 Reno/Sparks • 775-358-5111

NORTH DAKOTA TRACTOR AND EQUIPMENT www.tractorandequipment.com Williston • 701-572-8377

MONTANA TRACTOR AND EQUIPMENT www.tractorandequipment.com Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Kalispell • 406-752-3030 Missoula • 406-721-4050

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 41

NEW MEXICO WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista • 505-334-5522 (Rental) La Cruces • 575-647-9700 Albuquerque • 505-345-8411 505-938-2000 (Rental) Hobbs • 575-393-3665 575-393-2148 (Rental) Clovis • 505-235-3294 (Rental) Farmington • 505-327-5331

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton • 580-323-3422 Oklahoma City • 405-789-6812 Tulsa • 918-437-5085

OREGON WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pendleton • 541-276-5812

TEXAS GEORGE P. BANE, INC. www.banemachinery.com Tyler • 903-597-6641 WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

WASHINGTON NC MACHINERY www.ncmachinery.com 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pasco • 509-547-9541 Spokane • 509-535-1744

WYOMING TRACTOR AND EQUIPMENT www.tractorandequipment.com Worland • 307-347-4747

Page 42 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING FOR USED HITACHI EXCAVATORS LIKE EX200, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER &

TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. KINDLY SEND US YOUR OFFERS IF ANY AVAILABLE. THANKS. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. IF YOU HAVE ANY UNITS AVAILABLE PLEASE LET ME KNOW. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): CAT 966F & CAT 966F II. IF ANY ONE HAS ONE AVAILABLE PLEASE LET ME KNOW. THANK YOU. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03350237541 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 ––––––––––––––––––––––––––––––––

WANTED (US): JOHN DEERE BULLDOZER 700JXLTT OR 700JLGP UNDER 900 HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA; PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS; I AM LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODLES BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S3 OFF-HIGHWAY TRUCKS - LOOKING FOR REAR END DIFFERENTIAL FOR 30TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (US): NEED CAT 966F WHEEL LOADER ANY CONDITION IS PREFERABLE. OFFER US ANY CONDITION YOU HAVE AVAILABLE. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 ––––––––––––––––––––––––––––––––

WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR 966F II WHEEL LOADER; LOOKING TO BUY CAT 966F 2 ANY CONDITION. EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR EXCAVATORS – WHEEL LOADERS, GRADERS, ALL MODELS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR EXCAVATORS, ALL MODELS. LOOKING TO BUY USED CONTRACTION WITH WHOLESALE. EMAIL: HUJIJIENTERPRISES@GMAIL.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 43

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Queretaro, Mexico April 29, 2021 For: Late Model Cat, Case, John Deere, Volvo Construction Equipment • Salem, NH April 30, 2021 For: Construction and Bridge Equipment • Dallas, TX May 5, 2021 For: Rental Fleet Construction Equipment, Trucks, Trailers • Athens, TN May 8, 2021 For: Four Prime Commercial Properties and Construction Equipment RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Edmonton, AB May 3-7, 2021 • Toronto, ON May 11-13, 2021 • Fort Worth, TX May 18-19, 2021 • Tipton, CA May 19, 2021 • Orlando, FL May 20, 2021 • Chilliwack, BC May 25-26, 2021 • Montreal, QC May 26-27, 2021 • Rocky Mtn Regional Event May 26-27, 2021 • Williston, ND June 2, 2021 • Phoenix, AZ June 4, 2021 • Saskatoon, SK June 8-9, 2021 • Sacramento, CA June 9, 2021 • Las Vegas, NV June 11, 2021 • Houston, TX June 15-16, 2021 • Great Plains Regional Event June 17, 2021 • Northeast Regional Event June 22-23, 2021 • Great Lakes Regional Event June 24-25, 2021 • Los Angeles, CA June 25, 2021 • Southeast Regional Event June 29, 2021 • Chehalis, WA June 29, 2021 ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • ONLINE ONLY April 15 - 26, 2021 • ONLINE ONLY April 15 - 27, 2021

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY April 27, 2021 • ONLINE ONLY May 4, 2021 • ONLINE ONLY May 11, 2021 • ONLINE ONLY May 18, 2021 • ONLINE ONLY May 25, 2021 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY April 28, 2021 • ONLINE ONLY May 5, 2021 DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., May 8, 2021 For: Construction Auction DEANCO AUCTIONEERS www.deancoauction.com 601-656-9768 • Philadelphia, MS May 26 - 27, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS July 21 - 22, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Sept. 15 - 16, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Nov. 17 - 18, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Crawfordsville, IN April 27, 2021 For: INDOT Spring Auction • Crown Point, IN April 29, 2021 DBS Construction Absolute Auction • Madison, IN May 4, 2021 INDOT Spring Auction • Fort Wayne, IN May 11, 2021 INDOT Spring Auction • Winamac, IN May 18, 2021 INDOT Spring Auction • Pendleton, IN May 18, 2021 29th Annual Summer Auction • Pendleton, IN September 17, 2021 29th Annual Fall Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

• Stoutsville, OH May 8, 2021 For: Spring Columbus Heavy Equipment Truck & Trailer Auction

• ONLINE April 27, 2021 For: Heavy Equipment Trucks and Vehicles

FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Sparta, WI April 22 - 28, 2021 For: Earthmoving, Quarry & Asphalt Paving Equipment • Archbold, OH May 21, 2021 For: NW Ohio Contractors Auction HENDERSON AUCTIONS www.hendersonauctions.com 800-850-2252 • Canton, MS Thurs., April 22, 2021 For: Public Contractor’s Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 11, 2021 For: Truck, Trailer & Equipment Auction • Marietta, PA Fri., August 13, 2021 For: Truck, Trailer & Equipment Auction HUNYADY AUCTION COMPANY www.Hunyady.com 215-361-9099 • Meadville, PA Wed., April 28, 2021 For: Live, Virtual Absolute Auction Pipeline Systems Surplus Liquidation • Glenville, PA Wed., May 19, 2021 For: Buffalo Construction Absolute Auction Virtual/Live Broadcast • Boonsboro, MD Thurs., June 3, 2021 For: Virtual/Live Broadcast for David M. Merchant, Inc.

• Plymouth Meeting, PA April 28, 2021 For: Heavy Equipment Trucks and Vehicles J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864 • ONLINE Thurs., May 27, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More • ONLINE Thurs., June 24, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • ONLINE ONLY June 3 - 10, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE ONLY August 5 – 12, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE ONLY September 30 – October 7, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE ONLY December 2 - 9, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Hamilton, OH May 11, 2021 For: Ohio Construction & Transportation Equipment Public Auction

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Brooklyn, MS May 21 - 22, 2021 For: Construction & Transportation Equipment Public Auction – Live & Online Bidding

• ONLINE ONLY Wed., May 19, 2021 For: Heavy Equipment, Truck & Trailer Auction

• Newton, NH June 5, 2021 For: Northeast US Live & Online Public Auction

• Gillsville, GA June 8, 2021 For: Contractor Inventory Reduction Public AuctionSimpson & Simpson, LLC, and Others, Live & Online • Kissimmee, FL June 12, 2021 For: Late Spring Construction & Transportation Public Auction MEEKINS AUCTION COMPANY www.meekinsauction.com 910-739-0547 • Raleigh, NC Thurs., May 20, 2021 For: Absolute Auction – Currin Brothers Retiring NITKE AUCTIONS www.nitkeauctions.com 715-539-6295 • Wausau, WI April 29-30, 2021 For: 2-Day WI Contractors Spring Auction PROXIBID www.proxibid.com 877-505-7770 • ONLINE Tues., April 27, 2021 For: Truck, Trailer & Heavy Equipment • ONLINE Tues., April 27, 2021 For: Faber Truck Services • ONLINE Wed., April 28, 2021 For: Live Virtual Absolute • ONLINE Thurs., April 29, 2021 For: Live Truck & Trailer • ONLINE Thurs., April 29, 2021 For: 2-Ring Public Live Online • ONLINE Sat., May 1, 2021 For: Absolute Equipment • ONLINE Tues., May 11, 2021 For: Oilfield, Trucks & Construction Equipment • ONLINE Fri., May 14, 2021 For: Heavy Equipment & Trucks PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE Tues., April 27, 2021 For: Government Auction • ONLINE Wed., April 28, 2021 For: Ag Equipment Auction • ONLINE Thurs., April 29, 2021 For: Truck & Trailer Auction ROSEN & COMPANY, INC. www.rosenandcompany.com 216-990-1831 • Cleveland, OH Fri., May 28, 2021 For: Spring Construction Auction

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • ONLINE ONLY – DAY 1 Thurs., April 30, 2021 For: 12th Annual Spring Auction • Windsor Locks, CT – DAY 2 Sat., May 1, 2021 For: 12th Annual Spring Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Sioux Falls, SD April 23 - 30, 2021 For: Spring Consignment Auction, Various locations near Sioux Falls • ONLINE May 7 - 12, 2021 For: Upper Midwest Locations • Keene, ND May 12 - 19, 2021 For: Rink Construction Retirement Auction • Alexander, ND May 18 - 25, 2021 For: Lupine Construction Inc. Equipment Reduction Auction • Litchfield, MN June 8 - 16, 2021 For: Litchfield Farm Equipment Auction VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • ONLINE ONLY Sat., May 22, 2021 For: Heavy Construction Equipment, Trucks & Trailers WAUSAU ACTIONEERS www.wausauauctioneers.com 800-432-1922 • Coloma, WI Thurs., May 13, 2021 For: Dehling Construction, LLC Land Clearing Contractors WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • ONLINE ONLY Sat., May 8, 2021 For: Public Auction • ONLINE ONLY Sat., June 12, 2021 For: Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • US Locations May 6, 2021 For: Various US Locations • Kissimmee, FL May 19, 2021 For: Heavy Equipment Auction

Page 44 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. APRIL/MAY 2021 CRANE SAFETY COURSES April 26 – April 27, 2021 Aerial Work Platform Operator & Inspector Training, Orlando, FL April 28 – April 29, 2021 Qualified Signal Person Training, Orlando, FL May 3 – May 7, 2021 Qualified Rigger & Signal Person Training, Houston, TX May 4 – May 7, 2021 Overhead Crane Train The Trainer, Cincinnati, OH May 5 – May 6, 2021 Forklift Operator & Inspector Training, Orlando, FL May 11 – May 12, 2021 Overhead Crane Operator Training, Houston, TX May 11 – May 14, 2021 Overhead Crane Inspector Training, Cincinnati, OH May 12 – May 14, 2021 Aerial Work Platform Train The Trainer, Orlando, FL May 17 – May 20, 2021 Overhead Hoist Maintenance Training, Cincinnati, OH May 17 – May 21, 2021 Mobile Crane Train The Trainer, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

ABC Users Summit 2021 Dates: May 12–14, 2021 Location: The Ritz-Carlton, Dallas 2121 McKinney Avenue, Dallas, Texas 75201 Description: For ABC members who want to excel at the highest levels of health care and industrial construction performance, this is a must-attend event. The exclusive ABC Users Summit brings together top construction users and merit shop contractors for interactive discussions about how to collaboratively improve upon the planning and delivery of high-quality construction projects. From automation and technology to contracting strategies, safety performance and the latest economic outlook, this event creates an environment where you can refine your skills and engage in open discussions with your peers. Registration pricing is $650 for contractor members. The deadline to register is Monday, April 19. Plus, registration is complimentary for health care and industrial users and developers. Visit http://userssummit.abc.org// for more information and to register for this event. For questions, email meetings@abc.org. ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) 2021 AED Summit (Virtually AND In-Person) Dates: May 24–May 26, 2021 NEW DATES! Location: The Mirage Hotel, Las Vegas, NV Description: AED is bringing the 2021 Summit to the lively city of Las Vegas, where the sky is the limit! Summit is the industry’s safest interactive and innovative equipment distribution event in North America. The health and safety of our members, employees and partners are AED’s highest priority. We have securely designed three full days of education, featured presentations, meeting spaces and networking opportunities specifically with our dealers in mind. 2020 was a learning curve for us all, but you do not have to figure it all out on your own. Find out where the industry is headed so you can be at the forefront by attending the AED Summit. The AED Summit is your annual opportunity to come together with professionals across the heavy equipment industry spectrum to improve yourself and your team and to build meaningful connections. Attendees can choose how they would like to attend this year; that’s right, you have options! We are offering an in-person or virtual registration to accommodate our members’ needs for the same price. Regardless if you choose to join us in Las Vegas or to view from the comfort of your office Regular registration ends on May 22, 2021. Late registration starts on May 23, 2021. Room blocks for the new dates of 2021 AED Summit are available. Attendees can choose to change their in-person registration to a virtual registration at any time. If you wish to do so, please email help@aednet.org to inform the AED team. For more information and to register for this event, please visit https://aednet.org/events/summit. If you need assistance registering, please call 800-388-0650.

LIFESAVERS 2021 VIRTUAL Lifesavers National Conference on Highway Safety Priorities Dates: April 26-28, 2021 Description: Last year, an estimated 36,096 people died in motor vehicle crashes in the U.S. Lifesavers is recognized as the premiere conference to learn about the latest highway safety research, best practices, and cutting-edge initiatives; and to explore innovative technology and strategies used to combat risky driving behaviors and save lives. The Lifesavers Conference is also historically the world’s largest gathering of leaders and advocates in traffic safety. The 2021 Lifesavers Virtual Conference will provide a global platform with 70 virtual workshops in nine tracks, plenary sessions, peer exchange discussion groups, and an extensive interactive exhibit hall. The learning environment is designed to engage federal, state and local government; law enforcement; public health; injury prevention; advocacy and non-profit organization professional in an exchange of ideas, strategies, and programs to reduce preventable injuries and deaths. Registration is now open. Visit https://lifesaversconference.org/ for more information and to WORLD OF CONCRETE (WOC) register for this event. World of Concrete 2021 Dates: June 8-10, 2021 Education: June 7-10, 2021 NATIONAL ASPHALT PAVEMENT ASSOCIATION (NAPA) Times: 9:30 am - 5:00 pm Beyond the Basics: Milling for Quality Webinar Location: Las Vegas Convention Center Dates: April 29, 2021 Description: World of Concrete is the commercial construction Times: 2:00 - 3:30 PM Eastern Time (US and Canada) industry’s largest annual international event for concrete and Speaker: Tom Chastain, Milling Product Manager, Wirtgen America Inc. masonry professionals and puts these kinds of immersive opportuDescription: Milling is the removal of often distressed asphalt mix- nities at your fingertips—join your community here and experience tures from a pavement structure. While some just see milling as the real, tangible results. Hands down, the best decision you'll make. process of generating reclaimed asphalt pavement (RAP) which can EXHIBITS: Original equipment manufacturers from around the world be used in future projects, milling can also positively or negatively impact the quality of rehabilitation efforts. 1.5 PDH Hour Available. and exclusive U.S. distributors of equipment, tools, products and services for the commercial construction, concrete and masonry The participants will: industries. 1. Learn the different types of cutting drums 2. Understand how different cutting drums impact RAP and the qual- WHO ATTENDS WOC? More than 60,000 industry professionals from all around the world, representing all segments of the construcity of the milled surface 3. Identify milling best practices for ensure the paving crew has the tion industry: Commercial Contractors, Concrete Contractors, best chance of placing and compacting a dense, smooth surface Concrete Pumpers, Construction Managers, Dealers/Distributors, Cost: NAPA Members, Government Officials and Academia - free Decorative Concrete Contractors, Designers and Specifiers, General • Non-Members - $29.00 Contractors, Block/Segmental Unit Producers Masonry Contractors, To register and for more information, please visit Architects, Engineers, Block Producers, Ready Mix Producers, https://www.asphaltpavement.org/programs/napa-webinars. Rental Equipment Centers, Repair Contractors, Residential Contractors, Specialty Concrete Contractors, Precast, Pipe and Block ENGINEERING NEWS-RECORD (ENR) Producers, Precast/Prestressed Producers, and more. Groundbreaking Women In Construction 2021 Virtual Event NEW FOR 2021! Cement Production Pavilion (North Hall): Dates: May 4–6, 2021 Description: ENR’s 2021 Groundbreaking Women in Features the leaders of the equipment and support services used in Construction’(GWIC)—our 18th!—will again be fully virtual, on an cement processing: kilns, separators, mills, dryers, silos, bagging, enhanced platform with even more opportunities to connect to peers automation & instrumentation. Supporting this pavilion is the and industry leaders alike. International Cement Seminar, premier conference for cement indusGWIC is much more than just a conference—it serves as a catalyst that helps women expand their presence, influence and career suc- try professionals, produced by Semco Publishing, parent company cess in an ever shifting industry—and to share, learn, challenge and of Cement Americas, Rock Products and Concrete Products magainspire in their organizations. It also has grown into the leading tal- zines. World of Concrete attendees can purchase the International ent development and networking event for construction industry pro- Cement Seminar Package to join cement industry thought leaders in a focused series of presentations on best practices in cement professionals! Attendees will have access to all of valuable content GWIC is known duction, equipment selection, materials, quality and environment for, with an enhanced attendee experience. A single-login, user- control technologies. friendly platform will enable seeing who is present in the virtual Registration for WOC 2021 is now open. space, the ability to IM and swap business cards with other atten- PLEASE BE ADVISED: There will be no onsite registration this year dees, and easy access to all presentations and handouts. due to new COVID safety protocols. You MUST REGISTER ONLINE Registration is now open. For registration questions please contact ENR Events Registration before coming to the show. Visit www.worldofconcrete.com for more information and registraServices at (844) 644-7449 or enr@executivevents.com. tion. Registration questions? Call Registration at 866.860.1983 or email Registration@WorldofConcrete.com. ASSOCIATED BUILDERS AND CONTRACTORS, INC. (ABC)

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 45

Page 46 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com 4 RIVERS EQUIPMENT....................................................................2 ALEX LYON & SON INC .................................................................44 AMULET .....................................................................................28,30 BANDIT INDUSTRIES INC .............................................................21 BARGAINS ......................................................................................40 BOMAG AMERICAS INC ..................................................................2 CONSTRUCTION EQUIPMENT GUIDE..............................26,42,45 DITCH WITCH OF ARIZONA .........................................................13 DOOSAN PORTABLE POWER......................................................38 ESCO CORP ...................................................................................32 FAE USA INC...................................................................................18 FELLING TRAILERS .......................................................................23 FISHER TOOLS ..............................................................................12 FLANGE LOCK................................................................................11 FLUID CONTROL SERVICES ..........................................................6 FRONT PAGE-WE.............................................................................1 HENDRIX MACHINERY LLC............................................................3 HITACHI CONSTRUCTION MACHINERY ...............................36,37 HYUNDAI CONSTRUCTION EQUIPMENT ..................................8,9 JJ SCHECKEL CORP .......................................................................5 KIRBY-SMITH MACHINERY INC....................................................48 KOBELCO CONSTRUCTION MACHINERY ............................34,35 KOMATSU AMERICA CORP ..........................................................33 KPI-JCI.............................................................................................16 LABOUNTY MANUFACTURING INC.............................................31 LINK-BELT EXCAVATORS.........................................................24,25 MAGELLAN CONSTRUCTION.......................................................14 MANITOWOC CRANE GROUP .....................................................47 METSO OUTOTEC .........................................................................17 MIAMI MACHINERY..........................................................................7 NATIONAL ATTACHMENTS ...........................................................28 NORAM.......................................................................................40,41 ROADTEC INC................................................................................39 SCHAEFER ENTERPRISES ..........................................................28 SENNEBOGEN ...............................................................................19 SMH GROUP-US.............................................................................11

SUMMIT SUPPLY LLC......................................................................6 SUPERIOR EQUIPMENT ...............................................................13 TERAN INDUSTRIES INC ..............................................................29 TEXAS SUPPLEMENT BANE MACHINERY ........................................................................24 BEE EQUIPMENT SALES LTD ........................................................8 BOTTOMLINE EQUIPMENT LLC...................................................18 COMPACT CONSTRUCTION EQUIPMENT ...................................5 CONSTRUCTION EQUIPMENT GUIDE ........................................10 GOMACO CORP.............................................................................23 GORILLA HAMMERS........................................................................1 HIGH TECH INDUSTRIES................................................................1 J & B PAVELKA INC........................................................................18 KIRBY-SMITH MACHINERY INC....................................................13 MCCOURT EQUIPMENT INC ..........................................................9 NIECE EQUIPMENT .......................................................................11 NUECES POWER EQUIPMENT...............................................12,17 POWERSCREEN TEXAS ...............................................................15 ROMCO EQUIPMENT CO................................................................2 SMITHCO ........................................................................................21 TEREX TRUCKS/VOLVO ...............................................................19 TROPHY TRACTOR .........................................................................7 VERMEER OF TEXAS-LOUISIANA .................................................3 WAUKESHA-PEARCE INDUSTRIES INC .......................................8 UTAH SUPPLEMENT CENTURY EQUIPMENT...................................................................7 CONSTRUCTION EQUIPMENT GUIDE ..........................................2 HONNEN EQUIPMENT CO..............................................................7 HOWE RENTAL & SALES ................................................................2 PIRTEK ..............................................................................................2 RASMUSSEN EQUIPMENT CO ......................................................5 SANDVIK MINING & CONSTRUCTION...........................................3 UTAH TRACK AND WELDING .........................................................1 WHEELER CAT .................................................................................8

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 25, 2021 • Page 47

REACCH NEW W

HE EIGH T TS IN PRRODUCTTIVI Manitowoc crawler c cranes are built to unsurpassed productivity and value on challenging jobsites. j Manitowoc delivers: d > Cranes ranging from 73 t (80 ( U USt)) to 23 > Capacity-enhancing VPC-MAX X® techno attachmen nts > Optional lo ong-reach booms, fixed fi jibs, extended u upper boom points > Optional 3..5 m wide boom inse erts for M

nitowoc.com n woc.com

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

www.kirby-smith.com Oklahoma City, OK 800-375-3339

Kansas City, KS 877-851-5729

McAlester, OK 918-310-1550

St. Louis, MO 866-279-1392

Tulsa, OK 800-375-3733

www.wpcrane.com 8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 275 W. Larch Road Tracy, CA 95304 209-597-3824

19602 60th Avenue NE Arlington, WA 98223 253-254-7950

6720 Arctic Blvd. Anchorage, AK 99518 855-342-7263

91-210 Kalaeloa Blvd. Kapolei, HI 96707 808-682-7263

3521 Alken Street Bakersfield, CA 93308 855-927-2637

8912 NE Vancouver Way Portland, OR 97211 971-202-4002

Page 48 • April 25, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE