$3.00
Published Nationally ®
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
Western Edition
www.constructionequipmentguide.com
February 5, 2017 • Vol. IX • No. 3 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910
Inside
Nevada Protects Historic Sites in I-80 Expansion By Jennifer Rupp CEG CORRESPONDENT
AED Brings Construction Industr y Together...6
Volvo EC350E Helps Water Flow in Arid Great Plains...10
The USA Parkway was originally a privately built, 6-mi. (9.6 km)-long road connecting Interstate 80 to the Tahoe Reno Industrial Center east of Sparks. The Nevada Department of Transportation (NDOT) began construction in June 2016 to extend the Parkway by more than 12 mi. (19.3 km) to reach U.S. 50 near Silver Springs. The approximately 18-mi. (29 km)-long, four-lane state roadway between Interstate 80 and U.S. 50 will further link the greater Reno/Sparks and Fernley/Fallon areas with the U.S. 50 Silver Springs corridor, enhancing regional mobility and creating an additional route for commuter, freight and other traffic. The road also will help support regional economic development and serve as another route in the event of emergency or weather-related road closures. NDOT thoroughly assessed five potential roadway see NDOT page 22
Ames crews performing excavation work.
Report Shows $926B Backlog Company Finds New Oil in Alaska
Bunyon Adds ‘The Beast’ to Fleet of Bandit Machines...35
Table of Contents................ 4 Attachment & Parts Section ...................................... 11-15 Truck & Trailer Section........ ...................................... 25-26 Recycling Section........ 35-42 Auction Section............ 45-53 Business Calendar............ 46 Advertisers Index.............. 54
The U.S. Department of Transportation in a new “conditions and performance” report estimates that the backlog of needed highway and transit infrastructure projects has reached $926 billion, and that many billions more will be needed in the next 20 years to keep up with demand. The congressionally mandated biennial report “identifies an $836 billion backlog of unmet capital investment needs for highways and bridges,” the USDOT said, and $90 billion more for transit systems. The Trump administration has described a plan to generate an estimated $1 trillion in overall infrastructure investment over the next decade, much of it by incentivizing much more private spending on projects. However, that total was for varied types of infrastructure and the USDOT report indicates that the backlog for highway and transit projects alone is nearly that great, separate from other transportation modes and from other types of infrastructure needs. Elaine Chao, President Trump’s nominee to be transportation secretary, told senators in her confirmation hearing that a
The U.S. Department of Transportation in a new “conditions and performance” report estimates that the backlog of needed highway and transit infrastructure projects has reached $926 billion.
task force will shape the details of its plan, in concert with members of Congress from both parties. She also indicated support for added direct federal funding as well as private finance. Former U.S. Transportation Secretary Anthony Foxx said the new conditions report shows that “we have an infrastructure system that is fundamental to the nation’s economic health, and it needs greater attention and resources.” see USDOT page 8
ConocoPhillips Alaska has made a new oil discovery in the Greater Mooses Tooth (GMT) Unit located in the northeastern portion of the National Petroleum Reserve–Alaska (NPRA). The Willow discovery wells, Tiŋmiaq 2 and 6, were drilled in early 2016 and encountered 72 ft. and 42 ft. (22 m and 13 m) of net pay, respectively, in the Brookian Nanushuk formation. ConocoPhillips has a 78 percent working interest in the discovery and Anadarko Petroleum holds the remaining 22 percent. The two discovery wells lie about 28 mi. (45 km) west of the Alpine Central Facility, and are approximately 4 mi. (6.4 km) apart. The Tiŋmiaq 2 well was tested and established good reservoir deliverability with a sustained 12-hour test rate of 3,200 bpd of 44degree API oil. Initial technical estimates indicate the discovery could have recoverable resource potential in excess of 300 MMbbl of oil. Appraisal of the discovery will commence in January 2017 with the acquisition of see OIL page 8
Page 2 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
TRI-WEST TRACTOR 6281 Southfront Rd. Livermore, CA 94551 925-455-8200 • Fax: 925-455-8220 www.tri-westtractor.com
BANE MACHINERY, INC. 2449 Manna Rd. Dallas, TX 75520 214-352-2468
Tyler, TX 903-597-6641 Fort Worth, TX 817-847-5894
www.banemachinery.com
Orion Equipment
Scott Equipment
18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com
14635 Valley Blvd. Fontana, CA 92335 909-822-2200 800-316-0327 www.scottequip.com
Farmers Equipment Co. 410 19th St. Lynden, WA 98264 888-855-4981
17893 State Route 20 Burlington, WA 98233 888-855-4982
www.farmersequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 3
"In Business for over 33 Years" www.hendrixmachineryllc.com 1992 Case 580SK, Stk#: 10585, OROPS, 2 WD, 5,556 hrs., 24" Bucket, 3 Stick Controls, 11Lx16 Front Tires, 19.5Lx24 Rear Tires.......... $16,500
1-936-327-5430 • Email: sales@hendrixmachineryllc.com
Se Habla 2014 Bomag BW177D-5, Stk#: 10325, EROPS, Español A/C & Heat, 66" Smooth Drum, 293 hrs., 14.9x24R3 Tires, 4 Cyl. Deutz Eng....... $64,500
2006 Ingersoll-Rand SD100D, Stk#: 10546, 84" Smooth Drum w/Pad Drum Shell Kit, 863 hrs., 8' 6" Push Blade, 23.1x26R3 Tires, 4 Cyl. Cummins Eng....................................... $49,500
2016 Dynapac CA1500D, Stk#: 10623, EROPS, A/C & Heat, 66" Smooth Drum.............. $82,500
2009 Cat D6T XL, Stk#: 10543, EROPS, A/C & Heat, FM Stereo, Sweeps, Rear Screen, Semi U Tilt Blade, 7,252 hrs., 95% U/C, 24" Pads, D62011 John Deere 700J LGP, Stk#: 10424, 2011 John Deere 450J LGP, Stk#: 10312, MS Ripper, Lights All Around, 10' 8" Wide.......... OROPS, 6 Way Blade, 2,409 hrs., 80% U/C, 24" OROPS, 6 Way Blade, 5,372 hrs., 80% U/C, 30" ............................................................ $119,500 Pads, 9' 7" Wide.................................... $49,500 Pads, 11 ft. Wide.................................. $69,500
2013 John Deere 850K WLT, Stk#: 10568, EROPS, A/C & Heat, FM Stereo, 6 Way Blade, 5,764 hrs., Vall Ripper, 30" Pads, 13 ft. Wide...... ............................................................ $129,500
1997 John Deere 450G LT, Stk#: 10596, OROPS, 6 Way Blade, 3,918 hrs., 16" Pads, 4 Cyl. JD Eng., 8 ft. Wide..........................$22,500
2008 Cat D6N LGP, Stk#: 10462, OROPS, 2011 John Deere 650J LGP, Stk#: 10489, Sweeps, Rear Screen, 6 Way Blade, 8,332 hrs., OROPS, Eng. Encl., 6 Way Blade, 95% U/C, 34" Pads, 13' 4" Wide............................ $72,500 2,682 hrs., 24" Pads, 10' 4" Wide.......... $66,500
1997 John Deere 450G LGP, Stk#: 10598, OROPS, 6 Way Blade, 4,083 hrs., 24" Pads, 4 Cyl. JD Eng., 8 ft. Wide..........................$22,500
2006 Cat D5G LGP, Stk#: 10506, EROPS, A/C, Sweeps, Rear and Side Screens, 6 Way Blade, 4,419 hrs., 26" Pads, 10' 8" Wide.......... $63,500
2013 John Deere 850K WLT, Stk#: 10621, 2011 John Deere 650J LGP, Stk#: 10620, 2011 John Deere 650J LGP, Stk#: 10624, EROPS, A/C, FM Stereo, 6 Way Blade, 5,869 OROPS, 6 Way Blade, 3,212 hrs., 28" Pads, 4 hrs., 30" Pads, Vail JD850 Ripper, 13 ft. Wide...... OROPS, 6 Way Blade, 3,621 hrs., 28" Pads, 4 Cyl. JD Eng., 10' 4" Wide...................... $54,500 ............................................................ $139,500 Cyl. JD Eng., 10' 4" Wide...................... $56,500
2012 John Deere 850K LT, Stk#: 10574, EROPS, A/C & Heat, FM Stereo, 3,420 hrs., 80% U/C, Semi U Tilt Blade, Vall, 850 Rear Ripper, 23" Pads, 10' 9" Wide.......................... $139,500
2015 Doosan DX225LC-3, Stk#: 10606, EROPS, A/C, 26 hrs., 44" Bucket, Aux. Hyd., 36" Pads, 6 Cyl. Doosan Eng., 10' 10" Wide.......... $129,500
OEM Tracks, Stk#: 9718, New Original Excavator Tracks: 28” Pad, 49 Links, 190MM Pitch, Cat, 2006 JLG 400S, Stk#: 10288, 500 lbs., 40 ft., Komatsu, Hitachi, Volvo, Kobelco, Case, Linkbelt 2,545 hrs., 4WD, Vortec 4 Cyl. Gas Eng.$18,500 and Others.............................................. $7,500
2012 John Deere 772G, Stk#: 10461, EROPS, A/C & Heat, FM Stereo, 5,646 hrs., 14 ft. M/B, Hyd. Sideshift, TIP Control, Push Block, Ripper, 17.5Rx25 Tires, JD Eng....................... $139,500
2016 Gehl V400, Stk#: 10601, EROPS, A/C, FM Stereo, 107 hrs., 75" Bucket, Aux. Hyd., 14-17.5 / 36Rx7x11 Rubber Tires w/Chains, 4 Cyl. Cummins Eng....................................... $49,500
2014 Cat 257B3, Stk#: 10625, EROPS, A/C, 624 hrs., 79" Bucket w/Teeth, Aux. Hyd., 15" Rubber Tracks, 4 Cyl. Cat Eng........................... $36,500
2014 John Deere 35D, Stk#: 10421, EROPS, A/C & Heat, 1,671 hrs., 12" Bucket, Front Blade, 2013 John Deere 624K, Stk#: 10238, EROPS, Aux. Hyd., 12" Rubber Tracks, Quick Coupler, 3 A/C & Heat, FM Stereo, 1,745 hrs., 8' 8" Bucket, Cyl. YanMar Eng................................... $36,500 20.5Rx25 Tires, 11 ft. Height.............. $132,500
2015 Dynapac CA2500D, Stk#: HR-529, EROPS, A/C, 776 hrs., 84" Smooth Drum, Automatic Vibation Control, 550/60-22.5 Tires, Cummins Eng....................................... $79,500
Ripper for Dozer, Stk# 299, 1EH02480.. $9,500
2014 Doosan DX225LC-3, Stk#: HR-592, 2011 Komatsu D65PX-16, Stk#: HR-658, EROPS, A/C, 1,199 hrs., 42" Bucket, Aux. Hyd., EROPS, A/C, Heat, 3,995 hrs., Straight Blade w/ 24” Pads, 9' 10" Wide, 6 Cyl. Doosan Eng........... Tilt, Engine Enclosures........................ $119,500 .............................................................. $98,500
2015 Doosan DX225LC-3, Stk#: HR-637, EROPS, A/C, 957 hrs., 42" Bucket, Aux. Hyd., 32" Pads, 6 Cyl. Doosan Eng., 10' 6" Wide.......... .............................................................. $99,500
2011 Cat D6T XL, Stk#: HR-574, EROPS, A/C, Semi U Tilt Blade, 4,213 hrs., 24" Pads, 10' 7" Wide.................................................... $159,500
2007 Ditch Witch RT40, Stk#: 9992, OROPS, 2013 Komatsu PC360LC-10, Stk#: HR-660, 1,072 hrs., 64" Push Blade, 6" Trench, EROPS, A/C, FM Stereo, 3,998 hrs., 60" Bucket, 26x12.00x12 Tires, 3 Cyl. Deutz Eng..... $16,500 34" Pads, 85% U/C, 11' 4" Wide.......... $119,500
2013 John Deere 624K, Stk# 10237, EROPS, A/C & Heat, 1,142 hrs., 3.5 Yard Jdeere Bucket w/Bolt on Cutting Edge, Hyd. Quick Coupler, 30.5x25 Bridge Stone Tires @ 80%.... $139,500
2011 Doosan G25E-5, Stk#: 10455, 4,600 lbs., 7 ft., 42" Forks, 45" Frame, 5,681 hrs., 7.00x15 Front and 6.50x10 Rear Hard Rubber Tires, Doosan DOHC, 16V Gas Eng................. $14,500
2012 Komatsu HM300, Stk#: HR-667, EROPS, 1995 Flat Rack 1AA-FRC/X, Stk# 10496, 40' L x A/C, FM Stereo, 7,838 hrs., 23.5Rx25 Tires, 6 Cyl. 8' W........................................................ $4,250 Komatsu Eng., 11'8" Height................ $119,500
Page 4 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
IN THIS ISSUE
WESTERN EDITION Circulated Throughout
• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming
To read these stories and many more, visit www.constructionequipmentguide.com
6
FEATURES 6
10
35
AED BRINGS CONSTRUCTION EQUIPMENT INDUSTRY TOGETHER
This year, the Summit saw many changes and milestones for AED as an organization, which led to an event that was incredibly successful from AED’s and its members’ standpoint.
24 STADIUM AUTHORITY PASSES RESOLUTION 10 VOLVO EC350E HELPS WATER FLOW IN ARID GREAT PLAINS Amarillo, Texas, sits in the crosshairs of America’s Routes 40 and 287, and is a waypoint between Albuquerque, N.M., and Oklahoma City, Okla.
16 NBA NAMES MELISSA CARON PRESIDENT OF
TO CONSTRUCT NEW ALOHA STADIUM
Maximus North America is setting the gold standard for the Mobile Crushing
increases for deferred maintenance toward health and safety repairs in order
& Screening industry by introducing the Irish based Maximus Crushing and
to extend the stadium's current operation.
Screening product line into North America in 2015.
24 JCB’S DEALER NETWORK GROWS WITH ADDITION OF JCB OF LAS VEGAS
20 CASHMAN CORPORATE HQ RECEIVES
Equipment dealer Southwest Material Handling Inc., headquartered in Mira Loma, Calif., has added a new, JCB-dedicated location in Las Vegas, Nev.
Jeff Wimer, Oregon Logging Conference president, has selected Merv George Jr., the forest supervisor of Six Rivers National Forest in northern California, as keynote
22 DEMOCRATS PUSH INFRASTRUCTURE
Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.
Edwin M. McKeon Sr. Dennis Hogeboom Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon Jr.
News-Miner reported.
VETERANS THROUGH ‘THE BOOT CAMPAIGN’ Equify, a Fort Worth, Texas, based equipment finance company, has several ties with the armed forces. As a company, it continuously dedicates time and
Editorial e-mail editorial@cegltd.com
43 CLASSIFIEDS 45 COMING AUCTIONS 46 BUSINESS CALENDAR
effort to supporting the military. However, 2016 showed the heart of the company and its customers in a profound way.
35 BUNYON ADDS ‘THE BEAST’ TO FLEET OF Among his fleet of machines are five Bandit hand-fed chippers and The Beast — a newly acquired model 3680 track that’s the first to combine Bandit’s 30-tooth cuttermill with a 1050-hp Cat diesel.
EQUIPMENT 11 JOHN DEERE Hydraulic Coupler 11 VIRNIG MANUFACTURING V50 Front Brush Cutter 25 KENWORTH T680 Sleeper Advantage Package
Kent Hogeboom
Dennis Hogeboom
Patrick Kiel
National Sales Manager
• Colorado• Louisiana • Oklahoma • Texas • New Mexico
• Idaho • Montana • Oregon • Washington • Wyoming
602/679-8759 e-mail dennishogeboom@cegltd.com
Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com
315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com
Advertising e-mail production@cegltd.com
DEPARTMENTS
32 EQUIFY, CUSTOMERS UNITE TO SPONSOR
For advertising rates Contact
www.constructionequipmentguide.com
Mobile
RECERTIFICATION FOR QUALITY
modest hope that a buyer could resume operations, the Fairbanks Daily
BANDIT MACHINES
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site
38 MB CRUSHER RECEIVES ISO
POLE REFINERY The decision by Flint Hills Resources to tear down refining facilities ends
AS STATE PRIORITY Montana Democrats said their top priority for the legislative session will be pushing Gov. Steve Bullock’s $293 million infrastructure package after a similar proposal was rejected by Republican-led lawmakers two years ago.
36 ATLAS COPCO’S BUCKET CRUSHER
24 DEMOLITION BEGINS ON SHUTTERED NORTH
20 GEORGE SELECTED AS KEYNOTE SPEAKER AT 79TH OREGON LOGGING CONFERENCE
RECYCLING SECTION OFFERS GREATER VERSATILITY
SHARP AWARD FROM NEVADA’S SCATS Cashman Equipment’s corporate headquarters in Henderson, Nev., has been officially recognized by the Safety Consultation and Training Section (SCATS) of the state of Nevada’s Division of Industrial Relations for its successful completion of the Safety and Health Achievement Recognition Program (SHARP).
CRUSHING, SCREENING LINE
The decision comes after a number of studies showed exponential cost
BOARD OF DIRECTORS Melissa Caron, president of A.M. Smith Electric Inc., has been named president of the board of directors of Nevada Builders Alliance. Caron has served on the board since 2014.
36 MAXIMUS ‘STRIKES GOLD’ WITH
YouTube
Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 5
> ÊÕ
> Õà ÃÊÌ `>Þ `> >Þ ÞttÊ ÀÀÞ Þ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ
www ww w.R .RBused.com
Celeb brating tiing g our 30th Yea Year!!
2006 KOMATSU PC78MR-6, #82564, CAB/AC, 11’2” BOOM, 8’10.5” ARM, 17.5” RUBBER TRACKS, AUX HYDS, THUMB, 2400 HRS............ ................................................................ $69,500
2014 KOMATSU PC88MR-10, #92381, CAB/AC, 11’2” BOOM, 7’ ARM, 18” SHOES, AUX HYDS, QC, 1800 HRS..........................................$89,500
2002 KOMATSU PC95R-2, #50051, CAB/HEAT, 20” TRACKS, AUX HYD, BLADE, 1900 HRS.......... ................................................................ $69,500
2012 KOMATSU PC138US LC-8, #82648, CAB, 23.5” SHOES, STEEL TRACKS, BLADE, AUX HYDS, STRICKLAND HYD THUMB, 2200 HRS...... .............................................................. $119,500
2005 KOMATSU PC160 LC-7, #82702, CAB/AC, 16’ BOOM, 8’6” ARM, 23.5” SHOES, 6500 HRS.. ................................................................ $79,500
2009 KOMATSU PC200 LC-8, #81893, CAB/AC, 2014 KOMATSU PC210 LC-10, #92117, CAB/AC, 9’7” ARM, REAR CAMERA, JRB CAMERA, JRB 31.5” TRACKS, 9’7” ARM, HYD THUMB, KOMQC, HYD THUMB, KOMTRAX, 2000 HRS$189,500 TRAX, REAR CAMERA, 900 HRS.......... $197,500
2008 KOMTRAX PC220 LC-8, #82213, CAB/AC, 31.5” TRACKS, QC, HYD THUMB, REAR CAMREA, KOMTRAX, 6400 HRS.................. $124,500
2006 KOMATSU PC228US LC-3, #82164, CAB/AC, 2013 KOMATSU PC240 LC-10, #82717, CAB/AC, JRB QC, HYD THUMB, 5300 HRS..........$139,500 19’ BOOM, 15’ ARM, 31.5” SHOES, AUX HYD, QC, 1500 HRS........................................$199,500
2006 KOMATSU PC270 LC-8LF, #82232, CAB/AC, 2014 KOMATSU PC290 LC-10, #82419, CAB/AC, 33.5” TRACKS, 60’ PIERCE LONG FRONT, KOM31.5” TRACKS, 10’ ARM, AUX HYD, REAR CAMTRAX, 5600 HRS.................................. $154,500 ERA, KOMTRAX, 2100 HRS.................. $249,500
2006 KOMATSU PC300 LC-7EO, #91808, CAB/AC, 33.5” TRACKS, 13’ ARM, AUX HYD, JRB QC, KOMTRAX, 5600 HRS.................... $169,500
2014 KOMATSU PC360 LC-10, #82391, CAB/AC, 33.5” SHOES, 10’6” ARM, REAR CAMERA, KOMTRAX, 1400 HRS.................................. $249,500
2011 KOMATSU PC308US LC-3EO, #82416, CAB/AC, QC, 33.5” SHOES, AUX HYD, KOMTRAX, 4400 HRS.................................................. $CALL
2008 KOMATSU PC400 LC-8, #91887, CAB/AC, 35.5” TRACKS, 13’ ARM, JRB QC, AUX HYD, KOMTRAX, REAR CAMERA, 8300 HRS $169,500
Page 6 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AED Brings Construction Equipment Industry Together
Soosan, one of the largest hammer manufacturers in the world, is looking to expand its dealer network in the United States. Sung Jong Kee (L), director, and Greg Henry, sales manager, both of Soosan.
A
ED’s Summit & CONDEX welcomed attendees to the Windy City for an unforgettable conference from Jan. 10 to 13. This year, the Summit saw many changes and milestones for AED as an organization, which led to an event that was incredibly successful from AED’s and its members’ standpoint. Attendance for this event was at an all-time high for a ConExpo year, and the Summit brought out many old and new faces at the Hyatt Regency Chicago. Attendees benefited from several networking parties, such as the new AED Foundation Fundraising Gala and 10th annual live auction presented by The AED Foundation and Ritchie Bros. that raised record-breaking donations to enhance the success of dealerships for years to come. This year’s event also included professional dealer education sessions on Jan. 10, for the first time. Education sessions, like the ones AED provides
Rene Wagner of Rubble Master is establishing a nationwide dealer network for one of the world leaders in recycling equipment. Geith Attachments are recognized worldwide for their strength and durability. (L-R): Vonda Miller, Bruce Jackson and Paul Schevlin.
during the Summit, create more opportunities and time to learn about issues pertaining to the construction equipment industry. As the only event with education that caters specifically toward dealers, AED wanted to give its attendees as many possibilities to attend sessions that would benefit their growth. These sessions were separated by tracks, including executive leadership development, people management, product support, sales and the customer experience, customer engagement, small dealer and rental, which created an opportunity for attendees to grow develop their skills. The keynote speakers provided different points of view on leadership and success and how these qualities can come in different forms. Richard Picciotto, the highest-ranking New York firefighter to survive the 9/11 attacks, discussed how bravery and courage come into play in careers. Daymond John of ABC’s “Shark
John Arapidis (L), vice president of major accounts, Kirby-Smith Machinery Inc., and Jon Berry, president of Berry Tractor and Equipment Co.
Tank” gave attendees an inside look at what it takes to build a company from the ground up and how to make it successful. Former Vice President Dick Cheney gave an in-depth discussion of climbing the political ladder, starting his career working with Donald Rumsfeld. He shared anecdotes about his time at Yale and working with Rumsfeld that kept the crowd laughing. He also gave insight into running the country during times of devastation as vice president during 9/11, and sharing somber stories Chulick (L), president, and John Paraschak, both about that day, which made everybody Frank of Stewart-Amos Sweeper Co. contemplate a difficult time in American history. AED is already looking forward to the 2018 Summit in Las Vegas at The Mirage, which will run from Jan. 15 to 19. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG see AED page 52
(L-R): Sean Donaghy, Dan Davis and John Patton, all of IROCK Crushers LLC.
Greg Hickman, sales and marketing manager of HydrauliCircuit Technology.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 7
Visit us March 7-11
South Hall #S61328 328
OUR TRUC O CK
www.C Curry Supply pp y.coom | 800.345..2829 One of America’s largest manufaccturers of commercial ser s vice vehicles, since 1932.
Page 8 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ConocoPhillips Finds Oil OIL from page 1
state-of-the-art 3D seismic. Subject to appraisal results and the choice of development scenario, Willow could produce up to 100,000 bopd. Assuming timely permit approvals and competitive project economics, initial commercial production could occur as early as 2023. “This discovery is tremendously exciting not only for ConocoPhillips, but also for the state of Alaska,” said Joe Marushack, president, ConocoPhillips Alaska. “Willow’s proximity to existing infrastructure improves the economic viability of the discovery. Development of Willow, a potential multibillion-dollar investment, could provide thousands of jobs during construction and could generate substantial revenue for the federal government, state, North Slope Borough, and communities in the NPRA.” In a follow-up to the Willow discovery, ConocoPhillips and its bidding partner, Anadarko, were successful in December’s federal lease sale on the western North Slope, winning 65 tracts for a total of 594,972 gross acres. ConocoPhillips independently was successful in December’s state lease sale on the western North Slope, winning 74 tracts for a total of 142,280 gross acres. “The Willow discovery adds to our history of exploration success in the NPRA and is consistent with our focused global exploration strategy,” commented Richard Lunam, president of exploration, business
development and other international for ConocoPhillips. “The acreage acquired in the recent state and federal lease sales gives us running room to test the concepts that led to Willow and other NPRA discoveries.” Besides exploration activities, ConocoPhillips continues to make substantial investments in new projects on the North Slope. In 2016, the company approved additional drilling at CD5, contracted with Doyon Drilling for a new-build extended reach drilling rig, and commissioned two new rigs for the Kuparuk River Unit. This winter, construction will begin at GMT1, a drill site eight miles west of CD5. The cost to develop GMT1 is approximately $900 million gross with peak production estimated at 30,000 bopd gross. First oil is planned for late 2018. In addition, permits have been filed for GMT2, located about 8 mi. (12.8 km) west of GMT1. GMT2 is estimated to cost more than $1 billion gross with peak production estimated at 25,000 to 30,000 bopd gross. A seismic survey over GMT2 and Willow is also planned in the first quarter of 2017. First oil for GMT2 is dependent upon the time to acquire federal permits, but is anticipated to be 2020 or 2021. The GMT Unit is operated by ConocoPhillips Alaska (78 percent interest). Anadarko Petroleum holds a 22 percent interest. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
USDOT Highlights Backlog USDOT from page 1
He added that such investment pays off, since “improving our nation’s roads, bridges, and transit helps create jobs, connects communities and ensures that our nation is equipped for the future.” The report indicated that addressing the growing highway investment backlog while still meeting other needs as they arise over the next two decades will require $142.5 billion annually in combined transportation spending from state, federal and local governments. By comparison, in 2012 — the most recent year in which the report’s data were available, those federal, state and local governments spent a total of $105.2 billion on such infrastructure, the USDOT said, or “35.5 percent less than what is needed to improve highways and bridges.” “The case for more investment in our nation’s transportation system is clear,” said Federal Highway Administrator Gregory Nadeau. “A strong transportation system will make businesses more productive and freight shippers safer and more efficient
while improving America's quality of life.” The report also said $26.4 billion is needed per year to improve the condition of transit rail and bus systems, but said in 2012, total spending to preserve and expand transit systems was $17 billion. “If transit investment is sustained at those levels, overall transit system conditions are expected to decline over the next 20 years, and increasing the transit system preservation backlog from an estimated $89.8 billion to $122 billion,” the announcement said. “This report shows the impact of the lack of investment in infrastructure,” said Carolyn Flowers, acting federal transit administrator. “The results of that neglect can be seen throughout our country as both reliability and safety suffer. We must increase investment in public transportation nationwide, because we must take immediate action to bring our transit infrastructure into a state of good repair and provide the world-class service that Americans deserve.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 9
“This show is massive and a must attend. It has all the latest equipment and the cutting-edge technologies we need to make us even more efficient.”
IMAGINE WHAT’S NEXT. Get the ultimate view of where construction is going. Go hands-on with the new technologies spread out over 2,500,000 square feet of exhibition space. Learn next-gen techniques, tools and ideas from over 140 education sessions. From earthshaking big iron to groundbreaking innovations, CONEXPO-CON/AGG 2017 is where over 130,000 construction industry professionals from around the world go to stay ahead of their competition.
Get the special $149 rate (and save up to $100) by registering early at www.conexpoconagg.com.
IF IT’S NEW, IT’S HERE.
March 7-11, 2017 | Las Vegas Convention Center | Las Vegas, USA
Co-located with ®
Page 10 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo EC350E Helps Water Flow in Arid Great Plains Amarillo, Texas, sits in the crosshairs of America’s Routes 40 and 287, and is a waypoint between Albuquerque, N.M., and Oklahoma City, Okla. The area is rich in cowboy culture and mementos of its Route 66 heyday, best symbolized by the Cadillac Ranch, located just west of the city. But beyond the tourist attractions, the semi-desert region of high plains in which Amarillo is located is the sunbelt of the south. The average annual rainfall is less than 20 in. and the heat is often upwards of 110F (43C). With a number of droughts in recent years, water is in short supply. Lake Meredith, one of the city’s main water sources is dwindling, placing greater demands on the Ogallala aquifer, the vast underground reservoir that supplies Amarillo’s 190,000 residents. As a conservation effort, the city recycles effluent and sells back more than 4 billion gal. (18 billion L) each year to regional electric utilities as cooling water for generators. Recently, the Potter County Wellfield — the first major wellfield since 1956 — was drilled, bringing water to Amarillo to help sustain residential and commercial growth. Great Plans for Great Plains Working for the city is Amarillo Utility Contractors, a water and sewer construction company. Established in 1999 by Monte Taylor, the company has a reputation in the Lone Star state as a wet utilities specialist for many high-profile projects. Recently the company replaced 17,000 ft. (5,181 m) of 30 in. (76 cm) sewer main that was 36 ft. (11 m) deep to serve future expansion west of Amarillo. On average, Amarillo Utility Contractors places more than 2 million ft. (600,000 m) of water and sewer pipe each year. “When I started the company, our projects were relatively small and shallow,” Taylor recalled. “Over time, we’ve taken on more challenging projects.” With more than 1,000 mi. (1,600 km) of wastewater lines and 130 mi. (200 km) of storm water drainage snaking below the city, the company is hard at work to repair, replace and rehabilitate the water and sewer lines — most of which date back to the 1950s.
According to Volvo, the EC350E yields superior digging and breakout forces, making it the ideal moneymaking partner for Amarillo Utility Contractors.
To maintain high performance in the extreme environment, the Volvo EC350E features a hydraulically driven, electronically controlled cooling fan, designed to protect machine vitals.
With a max depth of 25 ft. (7.62 m) and a 303 hp (226 kW) Volvo D13 engine, the EC350E has the strength to get the job done quickly and efficiently, according to the company.
Cloud ‘Nein’ Construction This kind of work is not without its difficulties. Unearthing, removing and replacing the cracked clay mains means cutting into streets and navigating a maze of other pipes and underground infrastructure. To match the deep trenching and large pipe requirements of urban projects, Amarillo Utility Contractors decided that it needed to upgrade its fleet. After attending the 2015 Volvo Days customer event in Shippensburg, Pa., Taylor added three Volvo EC350E crawler excavators to his fleet of 13 machines. The excavators have been supplied by respected local Volvo dealership ASCO Equipment.
Digging Deeper The Volvo excavators are proving popular with Amarillo Utility Contractors. “The EC350E is the right size for 95 percent of all projects,” Taylor said. The crew modified the bucket’s attachment bracket link to allowing excavating at greater depths. “We can now go to depths of 24 ft. and dig within 15 ft. of the machine without compromising trench stability,” explained Mike Nail, company superintendent. As a result, “We’ve reduced excavation time significantly,” he added. “The ability to bolt together parts on the ground and lower them in one piece, versus
placing each individually speeds us up tremendously,” said Nail. Ensuring the machines are working at optimum levels is ASCO Equipment. “They have provided stellar support for the Volvo machines and existing equipment from other manufacturers,” said Taylor. “The daily maintenance is simpler and faster,” said Nail. “The single cabin air filter can be easily accessed and doesn’t require us to remove panels,” he added. In addition to simple servicing, it is important for the operators to enjoy using the using the Volvo machines. Operator Rusty Wilkinson speaks from experience. “I like the Volvo controls because they’re responsive. The cab is also comfortable to sit in for eight to 10 hours a day,” he said. According to the company, the Volvo additions are popular and productive. On average, the Volvo EC350E can trench, place and backfill 1,800 ft. (550 m) of pipe each day. And, since the punishing drought shows no signs of abating, the new infrastructure projects will serve to replenish the parched land and the city of Amarillo. Texas,c may have been built on oil, but water will certain carve its future. For more information, visit www.volvoce.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
SECTION
Attachments Pages 11-15
For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
John Deere Hydraulic Coupler Eases Job of Switching Buckets The hydraulic coupler is designed for 35G, 50G and 60G excavators and is compatible with the ever-expanding lineup of John Deere Worksite Pro attachments.
The Virnig V50 open front brush cutter, is designed to rough-cut dense brush and clear trees up to 4 in. (10 cm) in diameter.
Virnig Manufacturing V50 Open Cutter Clears Dense Brush, Trees Virnig Manufacturing Inc.’s brush cutter attachment, the Virnig V50 open front brush cutter, is designed to rough-cut dense brush and clear trees up to 4 in. (10 cm) in diameter. The three-blade cutting system, mounted to a flywheel ensuring flywheel bounces off stumps rather than catching and damaging the motor. This skid steer brush cutter also features: • Standard dual hydraulic pressure relief valves with dynamic braking to stop the 250 to 275 lb. flywheel in under 10 seconds. • Two standard flow and two high flow Eaton motor configurations ensure optimum performance and longevity. • Tall push bar at the front provides rigidity and helps push over thick brush and trees. • Able to cut down to the ground to limit regrowth. • Double-sided, 5/8 by 5 in. (1.5 by 12.7 cm)
blades can be flipped over to utilize second sharpened edges. • Standard replaceable front skid shoes to increase the mower deck’s wear life. Available in 60 to 78 in. (152 to 198 cm) cut widths with a recommended flow rate of 14 to 42 gpm (53 to 159 Lpm). All Virnig products are backed by a one-year warranty, and the skid steer attachments are USA made and built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson and others. For more information, call 800/648-2408 or visit virnigmfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Switching buckets has never been easier with the new John Deere hydraulic coupler (16GE23) for compact excavators. Operators are no longer required to exit the cab to switch buckets, so site clearing can continue with high productivity and minimal interruptions. The hydraulic coupler is designed for 35G, 50G and 60G excavators, and is compatible with the ever-expanding lineup of John Deere Worksite Pro attachments. The hydraulic coupler offers many key features that help drive additional productivity from an excavator. Most notable is the wedge bar locking system that compensates for wear and keeps the coupler joint tight. The wedge-style bucket pickup enables compact excavators to maintain breakout forces by keeping weight down, and operators can easily switch to other attachments, such as hydraulic hammers, with an adaptive bracket. The coupler is activated using a rocker switch. Once activated, curling the bucket unlocks the coupler. “The hydraulic coupler optimizes job site performance and productivity by simplifying the bucket-switching process, so projects are no longer interrupted by a complicated, manual attachment-changing procedure,” said Mark Wall, excavator product marketing manager, John Deere Construction & Forestry. “This coupler was designed with smart features to quickly change attachments and keep operations up and running without enduring a long-drawn-out process.” The hydraulic coupler works with a variety of Worksite Pro buckets and attachments, and is compatible with most competitive models. For more information, visit www.JohnDeere.com.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 12 • February 5, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Call me toda ayyy,, I’ll be glad to help hellp you! ~ Jason
REPLACE EMENT UNDERCARRIA A GE
» The #1 Sellin ng Rubber TTrrack Brrand an nd In America! »
8 800-365-72 260 » depparts.com m
Morooka,® Bobcat,® Gehl,® Mustang,® TTak akeuchi,® ® CAT 279, 289 & 299
Ashland, VA VA » Jacksonville, FL » Dallas, D TX » Cincinnati, OH H » Portland,OR » Sacram mento, CA » Schenectady y,, NY » Leduc, AB
Vacuworx SS 2 Vacuum Offers Solution for Skid Steers The new Vacuworx SS 2 vacuum lifting system introduces yet another application for your skid steer — vacuum lifting. One of the most versatile construction tools available, skid steers are utilized by contractors of all sizes and across all trades. Now with the SS 2, your skid steer becomes part of a system that can lift steel plate, saw cut concrete, granite and marble slabs, landscape pavers and other materials faster, safer and smarter than ever before, according to the manufacturer. Ultimate Skid Steer Attachment Featuring all-aluminum construction, the SS 2 has a hydraulically driven vacuum pump and can be easily attached to any skid steer. Quick-connect hydraulic hoses and a universal mounting plate makes switching attachments fast and easy so you can maximize productivity. The SS 2 also can be used with a variety of mini-excavators or small cranes using the clevis hook connection.
manufacturer.
Featuring all-aluminum construction, the SS 2 design has a hydraulically driven vacuum pump and can be easily attached to any skid steer.
Productivity in a Small Package The compact design weighs just 98 lb. (44.4 kg), without mounting plate, but has a lifting capacity up to 2,716 lb. (1,232 kg). The SS 2 is
compatible with all skid steer brands and is perfect for floor, sidewalk, driveway, road and landscaping projects. Not only is vacuum lifting a safer alternative than hooks and chains, it also increases
your productivity and allows you to move on to the next job faster. In fact, with the help of the SS 2 you can cut concrete, remove the sections and pour new concrete all in the same day, according to the
How Vacuum Lifting Works The vacuum pump operates using the auxiliary hydraulics from the host machine (minimum 10 gpm [37.8 Lpm] required with maximum 3,000 psi). The vacuum pump maintains a constant vacuum in the pressure reservoir. When activated, the system pulls a vacuum between the integrated 24 by 24 in. (61 by 61 cm) vacuum pad and the object to be lifted, providing a powerful positive seal. Vacuworx Tough Seal pad seal is used on the vacuum pad to cover the material to be lifted and create the necessary suction. The vacuum seal holds until the operator activates the release (even in the event of a power failure). For more information, call 918/259-3050 or visit vacuworx.com.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • February 5, 2017 • Page 13
Visit us at ConExpo in Booth G3749 (gold lot)
1985! e c n i S
NEW, USED & REMAN PARTS • • • • • • • •
Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!
www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com
Page 14 • February 5, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • February 5, 2017 • Page 15
Page 16 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Nevada Builders Alliance...
NBA Names Melissa Caron President of Board of Directors
CONEXPO March 7-11 • Booth C-31727
Melissa Caron, president of A.M. Smith Electric Inc., has been named president of the board of directors of Nevada Builders Alliance.
After more than a century of listening to customers, we understand what you need on the job. And we deliver it with every durable, reliable Chicago Pneumatic product we make. See the full range at cp.com
Handheld Pneumatic & Hydraulic Tools
Portable Compressors
Light Towers & Generators
Compaction Equipment
Articulated Asphalt & Soil Rollers
PEOPLE. PASSION. PERFORMANCE.
Melissa Caron, president of A.M. Smith Electric Inc., has been named president of the board of directors of Nevada Builders Alliance. Caron has served on the board since 2014. “I am very thankful for the opportunity that NBA and my colleagues have afforded me and I fully intend on continuing to build upon the good work of my predecessors,” Caron said. “It is an exciting time for the construction industry in Nevada once again, but the challenges of managing growth responsibly, building a qualified local workforce and creating a stable business cycle for our state still remains at large. I look forward to working with professionals, legislators, contemporaries and competitors alike to face and meet these challenges to help build a robust and resilient future for Nevada.” Aaron West, chief executive officer of Nevada Builders Alliance, said Caron’s appointment is affirmation of the growing diversity and opportunities present in the construction industry. “Melissa Caron’s elevation to this post reflects the respect of her peers and an appreciation of her continued support of the industry and the Nevada Builders Alliance,” said West. The Nevada Builders Alliance is a professional organization representing the construction industry, and all affiliated sectors. With more than 700 member companies representing tens of thousands of Nevadans in every corner of the state, Carson City-based Nevada Builders Alliance serves as the voice of the state’s construction industry. Current executive board members include Rob McFadden of State Street Development LLC as vice-president; Duane Dougherty of Heritage Bank as treasurer; and Larry Peyton of Tahoe Insurance as secretary. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 17
ABILENE EQUIPMENT CENTER Abilene, TX 800/382-9271 www.anhltd.com
BANE MACHINERY INC. Dallas, TX 800/594-2263 Ft. Worth, TX 800/601-2263 Tyler, TX 800/594-2200 www.banemachinery.com
OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK 405/917-9191 Tulsa, OK 918/835-7200 www.oklahomaterritoryequipment.com
APCO EQUIPMENT North Las Vegas, NV 800/574-4089 www.apcoequipment.com
TRI-WEST TRACTOR, INC. Livermore, CA 925/455-8200 www.tri-westtractor.com
CLM EQUIPMENT CO. INC. Lafayette, LA 337/837-6693 Lake Charles, LA 337/625-5942 Baton Rouge, LA 225/677-7838 Houston, TX 281/598-2500 www.clmequipment.com
BEARD EQUIPMENT CO. Midland, TX 432/694-4530 www.beardequipco.com
KCMA A Corporation | 2140 4 Barrett Park Drive, Suite 101 |
Kenne esaw, Georgia 30144
| 770.49 99.7000
Page 18 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WE TESTED THE LATEST MACHINES TO FIND EVERY POSSIBLE ADVANTAGE. THE PROOF IS IN THE PERFORMANCE. SEE THE RESULTS.
SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • • • • • We tested the new M2-Series compact track loader ffrom Bobcat against a variety of comparable mach hines in our latest Bobcat Adva antage ® video series. Which machine delivers more mo ore hydraulic power while multifunctioning? multifunctioning? Watch our test and see for yourself.
Put a Bobcat loader to the test at your local dealership. Bobcat.com/CTLAdvantage
No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM
4 Tool Boxes Available
Authorized Bobc at Dealer s
TEXAS
Bobcat of San Antonio
UTAH
Bobcat of Austin
San Antonio 210-337-6136 www.bobcatcce.com
Intermountain Bobcat
Austin 512-251-3415 www.qualityequipmentco.net
Bobcat of Corpus Christi Corpus Christi 361-887-8499 www.bobcatcc.com
Bobcat of the Rio Grande Valley Alamo 956-782-5580 www.bobcatrgv.com
All Include Slugs and O'Rings.
Orem 801-293-2185 West Haven 801-293-2122 West Valley City 801-262-0208 www.imbobcat.com
Ranchers AT AT V and Tractor Kerrville 830-315-2330
Bobcat is a Doosan company. Doosan is a global leader in construction equipment, power and water solutions, engines, and engineering, proudly serving customers and communities for more than a century. Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries ©2017 Bobcat Company. p y All rights g reserved. | 53663-7
For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com
www.flangelock.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 19
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
John Deere 400D Articulated Truck, 1:50 Scale - $50
White Beavertail Trailer, 1:50 Scale - $60
Red Beavertail Trailer, 1:50 Scale - $60
Komatsu WH613 Telehandler, 1:50 Scale - $65
International TD-25 Dozer w/Umbrella, 1:50 Scale - $70
Caterpillar 140H Motor Grader, 1:50 Scale - $75
Caterpillar 432E Backhoe/Loader, 1:50 Scale - $90
Caterpillar 365C L Front Shovel, 1:50 Scale - $90
Komatsu WA500 Wheel Loader, 1:50 Scale - $90
JCB 467 WLS Articulated Front End Loader, 1:50 Scale - $110
Volvo L90G Wheel Loader, 1:50 Scale - $120
Peterbilt 367 Orange Dump Truck, 1:50 Scale - $120
Mack Granite Silver/Black Dump Truck, 1:50 Scale - $120
Komatsu WA380 Wheel Loader, 1:50 Scale - $135
Vogele MT3000-2i Power Feeder, 1:50 Scale - $140
Caterpillar 390F Excavator, 1:50 Scale - $175
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Email – bmckeon@cegltd.com
Page 20 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
U.S. Forest Service...
George Selected as Keynote Speaker at 79th Oregon Logging Conference
Merv George Jr.
Jeff Wimer, Oregon Logging Conference president, has selected Merv George Jr., the forest supervisor of Six Rivers National Forest in northern California, as keynote speaker at the 79th Annual OLC. The keynote address will be presented on Feb. 23 at 8:30 a.m., in the Wheeler Pavilion at the Lane Events Center and Fairgrounds. George has worked for the U.S. Forest Service since 2008. He has served as forest supervisor for more than two years. Prior to his position as forest supervisor, he was acting forest supervisor in early 2014. George has served the U.S. Forest Service at both the regional and forest levels. His first assignment was serving the Pacific Southwest region as the regional tribal relations pro-
gram manager, a position he held from 2008 to 2011. Prior to joining the Forest Service, George served as the executive director of the California Indian Forest and Fire Management Council, and also served as the administrator for the Klamath River Inter-Tribal Fish & Water Commission. George served four years on the Hoopa Valley tribal council, including two years (1998 and 1999) as tribal chairman. He has spent more than 22 years managing natural resources and in public service. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
LEED Facility...
Cashman Corporate HQ Receives SHARP Award From Nevada’s SCATS Cashman Equipment’s corporate headquarters in Henderson, Nev., has been officially recognized by the Safety Consultation and Training Section (SCATS) of the state of Nevada’s Division of Industrial Relations for its successful completion of the Safety and Health Achievement Recognition Program (SHARP). Cashman Equipment’s Leadership in Energy and Environmental Design (LEED) Gold-certified facility joins the company’s Elko and Winnemucca locations in achieving this important safety designation. “Cashman has been on a safety journey to zero incidents, injuries, etc. for a number of years now,” said Mike Pack, Cashman Equipment president and COO, in the presentation during the company’s annual managers meeting, which focused on safety. “Our goal is to have all of our locations become SHARP certified. This makes number three, after Winnemucca and Elko in November, so we are just going to keep moving forward on this path towards getting all our locations designated as officially self-governing in regards to safety.” Currently, there are less than 50 SHARP-designated businesses in Nevada. Successful SHARP participants are exempt for two years from Occupational Safety and Health Administration’s (OSHA) general schedule inspections.
Also, the no-cost SHARP program helps reduce safety incidents on site and adhere to OSHA regulations through internal safety audits. “It's a very small, elite group of employees who can say they are SHARP certified. It takes upper management commitment and buy in,” said Todd Schultz, chief administrative officer for SCATS. “You also have to have employee buy in. You have to really see commitment from all levels in order for the SHARP program to work, so this is a very big deal, a great accomplishment for Cashman Equipment.” “Our employees’ safety, health, and well-being are of the utmost importance to us as a company and to me personally,” said MaryKaye Cashman, chairman and CEO of Cashman Equipment and a former registered nurse. “As we have said before, there is absolutely nothing more valuable than sending our people home safely, every day. We are very pleased to receive this SHARP award recognizing everyone’s dedication to safety.” Cashman Equipment is also in the process of applying for its SHARP certification for its Reno location. For more information, visit cashmanequipment.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. With Komatsu CARE you can: • Lower your cost of ownership • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.
WEST KOMATSU DISTRIBUTORS
Bacon-Universal Company, Inc. www.baconuniversal.com HI Hilo 808-935-8595 • 800-352-3508 Honolulu 808-839-7202 • 800-352-3508 Kailua-Kona 808-326-1212 • 800-352-3508 Kauai (Lihue) 808-245-8472 • 800-352-3508 Wailuku Maui 808-244-9158 • 800-352-3508
Clairemont Equipment Co. www.clairemontequipment.com CA Escondido 760-739-9100 Fontana 909-429-9100 Imperial 760-355-7700 Indio 760-863-5558 San Diego 858-278-8351
Craig Taylor Equipment Company www.craigtaylorequipment.com AK Anchorage 907-276-5050 • 800-279-5051 Fairbanks 907-452-1192 • 800-452-1192 Soldotna 907-262-5977 • 800-254-5977 Wasilla 907-376-3838 • 800-973-2607
Kirby-Smith Machinery Inc. www.kirby-smith.com OK Oklahoma City 405-495-7820 • 800-375-3339 Tulsa 918-438-1700 • 800-375-3733 TX Abilene 325-692-6334 • 877-577-5729 Amarillo 806-373-2826 • 800-283-1247 Dallas 214-371-7777 • 800-753-1247 Ft. Worth 817-378-0600 • 877-851-9977 Lubbock 806-745-2112 • 866-289-6087 Odessa 432-333-7000 • 877-794-1800
Power Motive Corporation www.powermotivecorp.com CO Colorado Springs 719-576-5541 Denver 303-355-5900 Durango 970-259-0455 • 970-259-0456 Grand Junction 970-241-1550 Milliken 970-587-1188 WY Cheyenne 307-634-5149
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 21
Komatsu Equipment Co. www.komatsueq.com NV Elko 775-753-7557 North Las Vegas 702-399-1004 Sparks/Reno 775-356-1334 UT St. George 435-986-1000 Pleasant Valley 435-216-7777 Salt Lake City 801-972-3660 • 1-877-Komatsu South Jordan 801-972-3660 WY Casper 307-682-1445 Gillette 307-682-1445 Rock Springs 307-686-1300
Modern Machinery, Inc. www.modernmachinery.com ID Boise 208-336-8570 • 800-221-5211 Pocatello 208-233-5345 • 800-829-4450 MT Billings 406-252-2158 • 800-735-2589 Kalispell 406-755-5540 • 800-434-4190 Missoula 406-523-1100 • 800-332-1617 OR Eugene 541-688-7321 • 800-826-9811 Portland 971-222-1710 • 800-950-7779 WA Kent 253-872-3500 • 800-669-2425 Rochester 360-273-4284 • 800-304-4421 Spokane 509-353-1654 • 800-541-0754
Road Machinery, LLC www.roadmachinery.com AZ Gilbert 480-545-2400 Phoenix 602-252-7121 Prescott 928-778.5621 Tucson 520-623-8681 • 800-989-8681 CA Bakersfield 661-695-4830 Fremont 510-659-1903 Fresno 916-350-0640 Perris 909-355-3600 Redding 530-229-3820 Pico Rivera 562-699-6767 West Sacramento 916-375-3540
Waukesha-Pearce Industries, Inc. www.wpi.com TX Beaumont/Port Arthur 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275 Edinburg 956-386-0107 Houston 713-723-1050 Kilgore 903-984-2011 Pflugerville 512-251-0013 San Antonio 210-648-4444 Tomball 281-351-9016
www.komatsuamerica.com/komatsu-care
Page 22 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NDOT Project Extends USA Parkway
Montana...
Democrats Push Infrastructure as State Priority By Matt Volz ASSOCIATED PRESS
Last fall, crews reached approximately 50 percent completion of the major earthwork for the project, with more than 1.3 million cu. yds. (993,921 cu m) of earth already moved to make way for the future freeway. NDOT from page 1
alignments, ultimately selecting one alignment to most comprehensively minimize cultural, community, natural resource, construction and other impacts. The selected roadway alignment was chosen to avoid/minimize impacts to two significant historic resources. The 19th century Overland Trail stagecoach and wagon route, as well as the early-1900s Ramsey town and mine site, were both avoided. “There also is a significant estray/wild horse population in the project area,” noted Meg Ragonese, NDOT public information officer. “Wildlife fencing and two under-crossings will be installed on the new segment of roadway to enhance safety by helping prevent wildlife-vehicle collisions. The under-crossings also will help continue access to roaming lands for wild animals and other native animals.” Ames Construction of Carlin, Nev., was awarded the design/build contract for $75.9 million in 2016. Ames is heading up the earthwork, structural concrete, storm drains and wet utilities. Subcontractors include Granite Construction of Sparks, Nev., for paving; Nevada Barricade & Sign Company, also of Sparks for Traffic control, guardrail and striping; and Par Electrical Contractors of Reno, Nev., for ITS and lighting. Major earthwork is approximately
Granite crews placing asphalt pavement on USA Parkway.
50 percent complete, with nearly 1.3 million cu. yds. (993,921 cu m) of earth already moved to make way for the future freeway. This fall, crews have been busy paving the first segment of future roadway from the end of the existing, paved USA Parkway to the Lyon County line. Construction will continue through late 2017 with: • Continuing earthwork and excavation to create the new roadway alignment, totaling 2.4 million cu. yds. (1.8 million cu m) of earth and 350,000 cu. yds. (267,594 cu m) of rock excavation • Installation of two wildlife undercrossings and roadside animal fencing • Construction of a roundabout at the future USA Parkway/U.S. 50 intersection in Silver Springs • 245,000 tons (222,260 t) of asphalt paving, striping, drainage, signage and guardrail Aesthetic treatments will be added to enhance the project, including decorative rock depicting scenes of emigrants moving west, fur trappers and early
explorers. Artist Kate Raudenbush has been commissioned to create a sculpture for the entry to the Tahoe Reno Industrial Center (TRIC). The future USA Parkway will greatly increase mobility between the I-80 Reno-Sparks corridor and the Silver Springs/Dayton communities located on U.S. 50. In fact, the project is projected to reduce travel times by as much as 38 percent for those traveling between U.S. 50 and I-80. Because most of the project is taking place in an unpopulated area, construction work has minimal impact on mobility: currently, there are minor lane closures on the existing section of USA Parkway. Later this year, minor traffic control will take place on U.S. 50 in Silver Springs as a traffic roundabout is installed connecting the new roadway to U.S. 50. For construction updates, visit www.usaparkway.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
HELENA, Mont. (AP) Montana Democrats said their top priority for the legislative session will be pushing Gov. Steve Bullock’s $293 million infrastructure package after a similar proposal was rejected by Republican-led lawmakers two years ago. This time, the Democrats are framing the package as a jobs bill that would put construction workers and engineers to work. The Democrats are the minority party in both the House and Senate, so their ability to pass legislation is limited. Senate Minority Leader Jon Sesso and House Minority Leader Jenny Eck held a news conference flanked by members of their caucus in an effort to gain public support for the plan involving roads, water systems and buildings. “We intend to be part of the majority working on the best ideas to move Montana forward,” Sesso said. “And the best idea we have right now is to get this infrastructure bill done and get it done right.” Infrastructure funding is particularly important to eastern Montana, which is straining under the population growth brought on by the Bakken oil boom in North Dakota. But funding efforts have failed over the past two legislative sessions: In 2015, the package did not get enough votes to approve state bonds required to pay for many of the projects. Bullock vetoed a bill in 2013. Republicans also have identified infrastructure as a high priority in the session. GOP leaders have said they are working on their own package that focuses on water, sewer and critical transportation projects. Notably missing are building projects that Republican leaders objected to last time, such as renovating Montana State University’s Romney Hall and a new Montana Historical Society building in Helena. Republican spokeswoman Lindsey Singer said there is no immediate timeline for the GOP package to be introduced, and that the budget must be scrutinized first before lawmakers know how much can be spent on infrastructure projects. Rep. Jim Keane, D-Butte, will sponsor the two bills that contain the governor’s infrastructure package, which would be paid for with a mix of cash and bonds. Keane acknowledged that the governor’s package is unlikely to get through the legislative process unchanged. “We have to make compromises, but we’re going to get a good bill out that’s our bill and then turn that back to the governor,” Keane said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 23
BANE MACHINERY, INC. 2449 Manana Rd. Dallas, TX 75220 214/352-2468 Fax: 214/353-2460 Tyler, TX 903-597-6641 Ft. Worth, TX 817/847-5894 www.banemachinery.com
BEE EQUIPMENT SALES LTD. 2506 Slaton Highway Lubbock, TX 79404 806/745-1511 Fax: 806/455-0543 www.beeequipmentsales.com
C. L. BOYD CO., INC. 4220 West Reno Ave. Oklahoma City, OK 73107 800/OKC-BOYD 405/942-8000 Fax: 405/945-8569 Ardmore, OK 866/720-2693 580/224-2693 Lawton, OK 800/633-2693 580/355-6667 www.clboyd.com
SCOTT EQUIPMENT 14635 Valley Blvd. Fontana, CA 92335 800/316-0327 Fax: 909/822-4850 www.scottequip.com
Page 24 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Stadium Authority Passes Resolution Demolition Begins to Construct New Aloha Stadium on Shuttered North Pole Refinery The Stadium Authority has approved a resolution supporting the construction of a new Aloha Stadium.
The Stadium Authority has approved a resolution supporting the construction of a new Aloha Stadium. The decision comes after a number of studies showed exponential cost increases for deferred maintenance toward health and safety repairs in order to extend the stadium's current operation. The Authority states that the new facility could be constructed for a comparable price, as well as provide more opportunities. It’s expected to seat between 30,000 to 40,000. The Stadium Authority is hoping that a new stadium,
along with the proposed rail and transit oriented development, will create opportunities for new types of events. “We are excited for the future but recognize this is just one step in a very long process,” said Scott Chan, stadium manager. “The current stadium is safe to operate and we will continue to host events and welcome guests knowing that it may take a number of years until a new facility is constructed.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
JCB’s Dealer Network Continues to Grow with Addition of JCB of Las Vegas Equipment dealer Southwest Material Handling Inc., headquartered in Mira Loma, Calif., has added a new, JCB-dedicated location in Las Vegas, Nev. The new location, JCB of Las Vegas, will offer JCB’s backhoe loaders and telehandlers, rough terrain forklifts, large and compact excavators, skid steers and compact track loaders with side-entry doors and a single-arm PowerBoom. Founded in 1989, Southwest Material Handling Inc. is a leading Toyota forklift dealer that provides solutions to warehouse and material handling equipment needs. The company is continuously recognized for its innovation and desire to meet and exceed its customers’ needs. “Considering JCB’s dedication to the North American market and worldclass product offering, it made perfect sense to partner with them,” said Kirt
Little, president and CEO, JCB of Las Vegas. “The construction and landscape industries are continuing to grow in Las Vegas, so we’re particularly excited to offer JCB’s compact and mid-range machines. By combining JCB’s reliability and our outstanding service capabilities, we’re certain we’ll earn our customers’ confidence quickly.” In addition to both new and used equipment sales and rental, JCB of Las Vegas includes a fully staffed parts and service department to meet maintenance and repair needs. JCB of Las Vegas has also adopted JCB’s overall look and brand, and will be utilizing advertising and marketing to further communicate the availability of JCB equipment within Clark County and the surrounding area. “Southwest Material Handling Inc. is a great company, and we’re pleased
to work with Kirt Little and his staff to open their new Las Vegas-based JCB facility,” said Christian Baillie, JCB’s vice president of construction equipment dealer sales. “The staff at the new JCB of Las Vegas is ready to get to work. We expect them to make a real impact on their area’s heavy equipment market, and we’re here to support them all the way.” For more information about JCB of Las Vegas, visit http://www.jcboflasvegascom/. To learn more about JCB and its equipment for the construction, agricultural, industrial, waste/recycling, rental and landscaping industries, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
FAIRBANKS, Alaska (AP) The company that owns the shuttered North Pole Refinery has begun its demolition. The decision by Flint Hills Resources to tear down refining facilities ends modest hope that a buyer could resume operations, the Fairbanks Daily News-Miner reported. Flint Hills spokesman, Jeff Cook, in a prepared statement said no buyer was found. “With no parties interested in purchasing and operating the refinery, the prudent step is to demolish the refinery to best protect the site and repurpose the site for productive future use,” he said. The refinery opened in 1977. Flint Hills in 2014 ended refining operations but continued using the property as a storage facility. Flint Hills cited an increasingly difficult market and environmental cleanup costs from a chemical spill under a previous owner for shuttering the plant. The refinery was mothballed so a prospective buyer could resume production.
“It’s unfortunate. It’s a loss to Alaska and a loss to Fairbanks.” Jim Dodson Fairbanks Economic Development Corp.
The demolition is sad but “kind of inevitable,” said North Pole Mayor Bryce Ward. The reduced property value of the plant will have revenue consequences for the city, Ward said. The tax value already had been reduced more than half after refining ended. Until 2014, the plant was producing jet fuel, diesel, gasoline, asphalt and specialty fuels from North Slope oil transported through the trans-Alaska oil pipeline. More than 100 people worked at the refinery. Storage operations will continue, Cook said. Dismantling the site is an unhappy development, said Jim Dodson, executive director of the Fairbanks Economic Development Corp., even though the refinery already was dormant. “It’s unfortunate. It’s a loss to Alaska and a loss to Fairbanks,” Dodson said. “We try to assure that value is added to a raw material before it leaves Alaska, which would create jobs here.” North Pole City Councilman Doug Isaacson, a former mayor and a state legislator, remained hopeful. “It still is zoned for refining,” Isaacson said. “Just because they are taking out old equipment doesn’t mean that someone couldn’t put in new equipment somewhere down the road if the economy called for it.” For more information, visit newsminer.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
SECTION
Trucks & Trailers Pages 25-26
To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
Kenworth T680 Advantage Features Optimized Powertrain Kenworth’s new, fuel-efficient T680 52-in. mid-roof sleeper Advantage Package, for regional haul and less-than truckload operations, is now available for order. The latest Kenworth T680 Advantage configuration features an optimized powertrain with either the PACCAR MX13 or PACCAR MX-11 engine, Eaton Fuller Advantage series 10-speed automated transmission, and the new PACCAR Axle. The 52-in. mid-roof sleeper configuration offers new aerodynamic elements including a front air dam, flared-out fairings, lower sleeper fairing extenders and FlowBelow wheel covers that enhance fuel economy by effectively redirecting airflow around the chassis, sleeper and trailer. Other notable fuel-efficiency features are Kenworth’s predictive cruise control, neutral coast, and driver performance assistant. The T680 Advantage Package provides customers running the 52-in. mid-roof sleeper with up to a 6 percent fuel economy benefit compared to a standard Kenworth T680 52-inch mid-roof sleeper running the previous generation of PACCAR MX-13 engine, Eaton Fuller automated transmission, and standard drive axles, according to the manufacturer. “Regional haul and LTL fleets, as well as other truck oper-
The 52-in. mid-roof sleeper configuration offers new aerodynamic elements including a front air dam, flared-out fairings, lower sleeper fairing extenders and FlowBelow wheel covers that enhance fuel economy by effectively redirecting airflow around the chassis, sleeper and trailer.
ators, can now choose from the Kenworth T680 Advantage’s comprehensive line-up of day cab, 52-inch mid-roof and 76inch sleeper configurations for outstanding aerodynamics and fuel efficiency, resulting in reduced operating costs,”
said Kurt Swihart, Kenworth marketing director. The 52-in. mid-roof sleeper is especially well-suited for regional hauling applications — including tank, bulk, flatbed, heavy haul and lowboy — where drivers may spend just two or three nights on the road during a typical week. The sleeper features a liftable lower bunk and upper storage units on the back wall, with ample space for drivers to hang their clothes and jackets, plus an optional upper bunk for driving teams. For driver retention and recruitment, the T680 Advantage with 52-in. sleeper offers an optional passenger swivel seat that expands the living space into the cab to provide even more comfort for the drivers when parked. The design also provides sufficient head room for a driver or passenger up to 6-ft.-4 to easily stand up between the seats. Drivers appreciate the 7 ft. wide cab, reduced interior noise levels, adjustable advanced suspension seats with climate control, air-assisted hydraulic clutch, ergonomic dash, easy-to-use Driver Performance Center, and LED interior lighting. For more information, visit www.kenworth.com.
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
See the Future of Clean Energy at Green Truck Summit What does “clean energy” mean for work trucks in 2017 and beyond? The answers can be found at the Green Truck Summit 2017, the alternative fuels and advanced technology conference held in conjunction with The Work Truck Show. Fleet managers, truck equipment distributors, upfitters and truck dealers from around the world learn the clean energy developments and decisions shaping the journey toward the goal of zeroemission transportation, and the future of the work truck industry, at this annual conference. Produced by NTEA — The Association for the Work Truck Industry, the Green Truck Summit takes place at the Indiana Convention Center in Indianapolis, Ind. It kicks off March 14 at 8:30 a.m. with opening remarks and a keynote address; followed by general sessions that run through 5
p.m. Lunch and a networking reception are included. The Work Truck Show 2017 runs March 14 to 17. Educational sessions begin March 14, and the exhibit hall is open March 15 to 17. The Green Truck Summit brings together leading truck manufacturers, governmental and regulatory officials, and fleet management decision-makers to share their experiences, visions and outlook on how the industry can make an immediate impact on greenhouse gas and criteria pollutant reduction. The Work Truck Show and Green Truck Summit offer educational registrants the opportunity to attend concurrent sessions led by these experts over three days, March 14 to 16. “The objective of the Green Truck Summit is to bring together the top people who are leading the thinking and decision-making
about clean energy technologies and fuels, so they can share their thoughts with the industry and generate some real dialog that will help to move things forward,” said Doyle Sumrall, NTEA managing director. The Green Truck Summit 2017 kicks off with a keynote address by Wilfried Achenbach, senior vice president of engineering and technology of Daimler Trucks North America. “Dr. Achenbach is Daimler’s leading authority for technology and truck development, so how he sees the truck industry moving over the next couple of decades is going to be enormously insightful,” said Sumrall. Green Truck Summit general sessions will cover key subjects, including: • Government objectives for zero-emission transportation and
outlook on future policies. • Fuel and technology options paving the path to zero-emission commercial vehicles. • The effects of Phase Two greenhouse gas regulations. • Renewable fuels analysis and vehicle life cycle impacts. • New products and technology applications for fuel use and emissions reductions. Attendees can meet industry suppliers and experience the latest advanced technologies and alternative fuel applications by test-driving or riding in the newest commercial vehicles at the Ride-andDrive March 15 and 16. Participation is free and available on a first-come, first-served basis to all registered Work Truck Show 2017 attendees. No Ride-andDrive registration is necessary. Named one of the top 100 trade
shows in the United States, The Work Truck Show features the newest vocational trucks, vans, vehicle components and equipment from more than 500 exhibitors on an exhibit floor covering more than 500,000 square feet. In addition to participating in the educational program, attendees can get their technical and regulatory questions answered by NTEA staff and see the newest efficiencyboosting products in the Truck Productivity and Fuels Pavilion in The Work Truck Show exhibit hall. Registration for the Green Truck Summit and The Work Truck Show 2017 is available at worktruckshow.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 26 • February 5, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Mack mDRIVE Transmissions Gain Performance, Safety Mack Trucks introduced Mack mDRIVE rolling start and auto neutral, two new features designed to improve the jobsite performance and safety of trucks equipped with Mack’s mDRIVE and mDRIVE HD automated manual transmissions. Both features are standard on all Mack mDRIVE and mDRIVE HD transmissions. “Mack’s mDRIVE transmissions serve a wide range of customers, including those with demanding paving and concrete applications,” said Tim Wrinkle, Mack construction product manager. “Now updated with rolling start and auto neutral, mDRIVE transmissions are even better suited to those tasks.” Mack mDRIVE rolling start allows drivers to shift the transmission into drive without pressing the truck’s service brakes. This eliminates the possibility of creating a bump in the paving surface, which is a critical benefit for paving applications. Several construction applications, including concrete mixers, rely on remote throttle controls. By automatically shifting the mDRIVE into neutral when the parking brake is set, Mack mDRIVE auto neutral helps improve jobsite safety by reducing the possibility of the truck moving due to throttle application. Engineered to work exclusively with
Mack’s MP series engines, mDRIVE and way applications, the Mack mDRIVE transThe mDRIVE’s benefits didn’t go unnomDRIVE HD automated manual transmis- mission transformed trucking by eliminating ticed by vocational customers, who sought sions are a key component of the Mack inte- traditional shifting. With no clutch pedal or the efficiency and performance improvegrated powertrain, boosting efficiency, pro- shift lever to work, drivers can remain ments in construction applications. In ductivity and performance. focused on the road ahead. mDRIVE trans- response to their requests, Mack launched “Thanks to the performance, productivity missions monitor multiple driving variables the rugged mDRIVE HD in 2015 and made and fuel efficiency benefits mDRIVE trans- through sophisticated software to deliver it standard in Granite models. With reinforced internal components, the missions deliver, customers are mDRIVE HD can withstand the tough increasingly choosing them for their demands of vocational applications, applications,” Wrinkle said. “In fact, according to the manufacturer. mDRIVE transmissions are now the In 2016, Mack expanded its most popular choice in a Mack.” mDRIVE HD offer with two new verIn 2016, mDRIVE transmissions sions featuring low-ratio creeper were spec’d in a record percentage of gears. The Mack mDRIVE HD 13Mack models, making mDRIVE the speed offers a low reduction gear ratio most dominant transmission across designed for easier starting on steep Mack’s complete lineup of heavy-duty grades or when the truck is under trucks for the first time ever, according heavy load. The Mack mDRIVE HD to the manufacturer. Mack Trucks introduced Mack mDRIVE rolling start Mack mDRIVE and mDRIVE HD and auto neutral, two new features designed to 14-speed, available only in an overpenetration reached record levels in improve the jobsite performance and safety of drive configuration, adds a second reduction gear Mack Pinnacle Axle Back and Mack trucks equipped with Mack’s mDRIVE automated ultra-low-speed designed for curb pouring applications Granite models sold in the United manual transmissions. Both features are standard or low-speed, heavy-haul maneuverStates and Canada, with 80 percent on all Mack mDRIVE transmissions. ing. Both transmissions offer up to and 20 percent penetration respectivefour reverse gear ratios. ly. With the new low-ratio creeper For more information, visit www.mackgears and these new features added, Mack is smooth shifts and automatically select the trucks.com. on track to double mDRIVE HD penetration best gear for conditions. Mack made (This story also can be found on in Granite models in 2017. mDRIVE standard in Pinnacle models in Construction Equipment Guide’s website at Originally introduced in 2010 for high- 2014. www.constructionequipmentguide.com.)
Curry Supply Streamlines Design, Improves Trucks
Curry Supply’s line of water trucks have recently undergone a series of updates as a result of continuous improvement and FEA testing. Significant improvements have been made to the water trucks and also Curry Supply’s water truck tank kits. Water truck tank kits have been enhanced for easier and streamlined installation on job sites. Curry Supply is an ISO 9001 Certified company. For more information, call 800/345-2829 or visit www.currysupply.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 27
Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.
DELIVERING SUCCESS TOGETHER
Contact our distributors and find out how we can help improve your bottom line.
BIGGE CRANE AND RIGGING
SCOTT-MACON EQUIPMENT
RT-T-HC-CC-AT-BT-T www.bigge.com
RT-T-HC/CC-AT-BT www.smequipment.com
San Leandro, CA 888-337-2444 510-638-8100
14925 South Main Street Houston, TX 77035 713-721-7070 Fax: 714-721-0422
San Jose, CA 408-452-1537 La Mirada, CA 714-670-9525 Missoula, MT 888-337-2444 Houston, TX 713-434-0995 Auburn, WA 206-443-8500 Richmond, VA 804-271-9356
Dallas, TX 214-391-4000
For Your Local Terex Dealer Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes
Corpus Christi, TX 361-289-2782 Houma, LA 985-851-1118 Baton Rouge, LA 225-753-4111 Lake Charles, LA 337-882-0197 Tulsa, OK 918-224-2000
Authorized Terex Cranes Distributors © Terex Cranes 2016 · Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.
Page 28 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 29
Larger control valve and electronic controls deliver smooth, precise performance and up to 12% faster cycle times
Shift-long comfort from a spacious cab, automotive-grade seat and ergonomically-designed, fullyadjustable arm rests
Award-winning Wide Angle Visual Enhancement System (WAVES) provides seamless 270° panoramic view
Ground-level access to routine service points cuts daily maintenance down to just minutes
When your reputation relies on a single product line, you need to make sure that it’s the best it can be… all the way down the line. Link-Belt X4 Series Excavators are designed and built to dig, lift, swing and dump quicker than ever, along with better fuel economy and one of the largest, most comfortable cabs in their class. And we deliver all of this productivity and efficiency without the need for a Diesel Particulate Filter! But the most important piece is what happens every day on your job site. That’s why every Link-Belt Excavator is backed by a strong, responsive dealer network that goes the extra mile to keep you up and running no matter what. At the end of the day, that’s what really matters most.
Tier 4 Final engines deliver up to 12% improved fuel economy…and no DPF to maintain
Robust undercarriage with innovative side-frame design is easier to clean
Page 30 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15
Made in the USA
Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring
The SEAL SAVER WILL:
STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:
Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062 Fax: 770-509-5832
1-800-683-5189
Visit
www.sealsaver.com
for more information or contact us at 1-800-683-5189
EVEN TEXTERS AND DRIVERS HATE TEXTERS AND DRIVERS. • To work where others dare not go: narrow spaces, slopes, interiors of buildings, proximity to power lines. • To avoid wasting time and resources with an oversized machine.
Why GEAX?
• For ease of use and speed of set up. • For the compactness of the machine: saving on transport, fuel, maintanance. • To optimize every aspect of production by adapting the equipment to meet all jobsite needs.
STOPTEXTSSTOPWRECKS.ORG
COLORADO
WYOMING
WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora 303-739-3000 Denver 303-433-2727 (Rental) Carbondale 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs 719-390-7316 (Rental) 719-635-1669 Granby 970-328-2080 (Rental) Gypsum 970-328-2080 (Rental) Hayden 970-276-3781 Silverthorne 970-262-3788 (Rental) Fort Collins 970-493-5005 (Rental) Grand Junction 970-245-6546 (Rental) 970-242-2834 Pueblo 719-544-0088 (Rental) 719-544-4433 Steamboat Springs 970-871-1990 (Rental) Windsor 970-278-1750 (Rental) Burlington 719-346-7880 (Rental) (719) 346-5132 Durango 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750
TRACTOR AND EQUIPMENT Worland • 307-347-4747
WASHINGTON N C MACHINERY www.ncmachinery.com 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com 2100 Frontier Loop Pasco, WA 99301 509-547-9541 4625 E. Trent Avenue Spokane, WA 99212 509-535-1744
TEXAS ANDERSON MACHINERY CO. www.andersonmachinerytexas.com
Corpus Christi • 361-289-6043 Manor • 512-272-8133 Pharr • 956-781-5995 San Antonio • 210-661-2366 Victoria • 361-575-8111 GEORGE P. BANE, INC. www.banemachinery.com Tyler • 903-597-6641 WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651
NEW MEXICO WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista 505-334-5522 (Rental) La Cruces 575-647-9700 Albuquerque 505-938-2000 (Rental) 505-345-8411 Hobbs 575-393-2148 (Rental) 575-393-3665 Clovis 505-235-3294 (Rental) Farmington 505-327-5331
IDAHO WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com 500 E. Overland Road Meridian, ID 83642 208-888-2287 10780 N. Highway 95 Hayden, ID 83835 208-762-6690 1200 Foote Drive Idaho Falls, ID 83402 208-552-2287 16772 Hatwai Bypass Road Lewiston, ID 83501 208-746-3301 8403 S. 5th Avenue Pocatello, ID 83204 208-232-2640 3085 E. Kimberly Road Twin Falls, ID 83301 208-734-7330
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 31
ALASKA NC MACHINERY www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 907-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400
CALIFORNIA HAWTHORNE CAT www.hawthornecat.com San Diego • 800-437-4228 Lakeside/Escondido/Chula Vista 800-750-4228 (Rental) HOLT OF CALIFORNIA www.holtca.com Pleasant Grove • 916-921-8969
HAWAII HAWTHORNE CAT www.hawthornecat.com Hilo • 808-961-3437 Kauai • 808-245-4058 Kona • 808-329-4521 Oahu • 808-677-9111 Oahu • 808-676-0227 (Rental) Maui 808-877-6538
MONTANA TRACTOR AND EQUIPMENT Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com 3500 Highway 93 S. Kalispell, MT 59901 406-752-3030 3760 N. Reserve Street Missoula, MT 59808 406-721-4050
NORTH DAKOTA TRACTOR AND EQUIPMENT Williston • 701-572-8377
NEVADA CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway Henderson, NV 89052 702-649-8777 Fax: 702-633-4699 Elko • 775-738-9871 Reno/Sparks • 775-358-5111
OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton • 580-323-3422 Oklahoma City • 405-789-6812 Tulsa • 918-437-5085
OREGON WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com 607 Airport Road Pendleton, OR 97801 541-276-5812
Page 32 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Equify, Customers Unite to Sponsor Veterans Through ‘The Boot Campaign’
KOMATSU EQUIPMENT COMPANY www.komatsueq.com 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660 4460 Pioneer Way Elko, NV 89801 775-753-7557 3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 1409 East 3850 South St. George, UT 84790 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445 405 Jonah Drive Rock Springs, WY 82901 307-686-1300
www.roadmachinery.com Gilbert, AZ 480-545-2400 Phoenix, AZ 602-252-7121 Prescott, AZ 928-778-5621 Tucson, AZ 800-989-8681 Bakersfield, CA 661-695-4830 Fremont, CA 510-659-1903 Fresno, CA 559-834-3215 Mojave, CA 800-989-7121 Perris, CA 909-355-3600 Pico Rivera, CA 562-699-6767 Redding, CA 530-229-3820 Sacramento, CA 916-375-3540
ROAD MACHINERY Equify had hopes of raising money, but managed to surpass all expectations, ultimately raising more than $18,000 through the generous support and donations of its auction customers.
It’s likely you, or someone close to you, has a direct connection with someone in the armed forces. What you may never know is their whole story. Equify, a Fort Worth, Texas, based equipment finance company, has several ties with the armed forces. As a company, it continuously dedicates time and effort to supporting the military. However, 2016 showed the heart of the company and its customers in a profound way. Throughout the year, Equify received several items donated by The Boot Campaign to run through its auction events. Items such as combat boots signed by retired Navy Seal and Lone Survivor author, Marcus Luttrell and combat boots signed by Dallas
Cowboys quarterback Tony Romo. Equify had hopes of raising money, but managed to surpass all expectations, ultimately raising more than $18,000 through the generous support and donations of its auction customers. A Kimber Custom II .45 acp Boot Campaign Edition custom gun was repeatedly bid on, won and re-donated in order to raise more money. This item alone raised nearly all of the final donated amount. The Boot Campaign has assembled a dedicated team of experts, focused on the science of the brain of veterans. The difference with this approach is, they want to get to the root cause of what these veterans are experiencing in order to treat them, not just cover them up.
A Kimber Custom II .45 acp Boot Campaign edition custom gun was repeatedly bid on, won and re-donated in order to raise more money.
Throughout the year, Equify received several items donated by The Boot Campaign to run through its auction events.
The ability to treat each veteran as an individual gives them a better chance at surviving. Through the combined efforts of The Boot Campaign, Equify and its customer base, a veteran has now been sponsored and will soon receive diagnostics and brain treatment to combat TBI, PTSD, insomnia, pain and addiction. No story of a veteran is the same, therefore no treatment plan is the same. Equify continues to raise money and awareness through involvement in programs like ReBoot and the Boot Campaign. The goal for 2017 is to sponsor a second veteran. If you have items you wish to donate to have them auctioned off through Equify, contact katydabbert@equifyllc.com. For more information, visit bootcampaign.org and equifyllc.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
www.komatsusw.com 6101 Pan American W Freeway NE Albuquerque, NM 87109 505-345-8383
KOMATSU SOUTHWEST
901 Troy King Road Farmington, NM 87401 505-324-8601
4520 National Park Hwy Carlsbad, NM 88220 575-628-8301 1181 Burgundy Drive El Paso, TX 79907 915-872-1001
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 33
KIRBY-SMITH MACHINERY INC. www.kirby-smith.com 6715 W Reno Avenue Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334 Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000
POWER MOTIVE CORPORATION www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-587-1188 Durango, CO 970-259-0455 Cheyenne, WY 307-634-5149
WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com 12320 S. Main Street Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275 Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013 Buffalo, TX 903-322-7150
Page 34 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Pages 35-42
Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
Bunyon Adds ‘The Beast’ to Fleet of Bandit Machines “If you order it like this you save $9,” said Ron Rinell as he maneuvered his breakfast of eggs, ham and a side of hollandaise sauce into position to create a delectable dish of eggs benedict. He was very happy with the meal, especially since his daughter was home from college to share the breakfast with him. But he’s also very keen about getting his money’s worth, and while the eggs benedict breakfast at the worldfamous Madonna Inn is delicious,
something of a reputation for being the happiest town in America. Back in 1990 this was the first city in the world to ban smoking in public buildings. The downtown area is structured to promote pedestrian and bicycle traffic; a nod to the numerous biking and hiking trails in the area. All drivethru restaurants are banned in the city, and in 2010 the smoking ban was extended to all public outdoor areas as well. Outside the city limits, there’s the Pacific Ocean to the
Among the fleet of machines are five Bandit hand-fed chippers and The Beast.
removals to land clearing, stump grinding, pruning, disease treatment, firewood, crane service and more. Among his fleet of machines are five Bandit hand-fed chippers and The Beast — a newly acquired model 3680 track that’s the first to combine Bandit’s 30-tooth cuttermill with a 1050-hp Cat diesel. With The Beast dialed in, he’s running chipper knives on knife cutterbodies to produce specifically sized chips for a major nation-
The newly acquired model 3680 track.
having that extra $9 in your pocket makes the “self-assembled” version taste even better. Ron could certainly afford the eggs benedict if he wanted it. He’s the owner of Bunyon Bros. Tree Service, headquartered in San Luis Obispo and serving the entire San Luis Obispo County. Tucked neatly between Los Angeles and San Francisco on California’s picturesque Central Coast, San Luis Obispo (or SLO to the locals) has
west, mountains to the east, and vineyards all around. The local population of 44,000 love it, and the floods of tourists who visit each year seem to love it as well. Watching Ron enjoy his breakfast while sharing stories of surfing and travel, it’s pretty easy to see he loves SLO as much as anyone. It’s certainly a great place to build an all-encompassing tree care business — Ron and his 30 employees handle everything from
The model 3680 track combines Bandit’s 30-tooth cuttermill with a 1050-hp Cat diesel engine.
wide company specializing in playground material. Starting with whole trees, he makes the precise product his client needs in a single pass. And when other clients come calling for mulch, swapping the knives for cutting or grinding teeth is barely a 15-minute operation on the 30-tooth cuttermill. “They want us to make chips for them, for playground use,” explained Rinell. “We are their source to make chips with The Beast to distribute throughout California. They want to purchase 20,000 to 30,000 yards right now, and it’s a really good, specific chip they need. This project alone was good justification to get The Beast because it would finance the machine, never mind all the clearing projects I had to turn away. We have new screens and baffles going into The Beast to make the certified chip they need, and Bandit has really helped us with the configuration to make just the right product.” And that’s the “new” big project Bunyon Bros. is taking on. The company recently picked up a job for a local military base, clearing see BANDIT page 38
Page 36 • February 5, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Atlas Copco’s Bucket Crusher Offers Greater Versatility
(L-R) are Dave Turin and Darlene and Stu Gamble.
Maximus ‘Strikes Gold’ With Crushing, Screening Line Maximus North America is setting the gold standard for the Mobile Crushing & Screening industry by introducing the Irish based Maximus Crushing and Screening product line into North America in 2015. This statement proved to be true and ironic when one of the stars of the Discovery Channel’s hit TV show “Gold Rush” noticed the bright red Maximus MXJ-1000 Jaw Crusher at an industry trade show in 2016. Dave Turin, who oversees mining and production for 316 Mining LLC, otherwise known as The Hoffman Team, stopped by the Maximus North America stand as he was leaving the trade show because the quality, fit and finish of the machine caught his attention and he was interested to see whether there might be any synergies between the 316 Mining Team and the Maximus brand. Stu Gamble, president of Maximus North America, and a few of the MNA dealers struck up a conversation with Turin about the product line and it was discovered that Maximus did indeed have a machine in its product line that could fit in the gold mining operation. The 316 Mining Team’s set up at the time included a trommel screen that could separate material but did not have a hopper which would allow material to be fed into it. Maximus builds a TFC-80 360 degree swivel feed hopper stacker that would have the capability of remotely operating on a 90 degree angle. This technology would allow
The Hoffman Team to feed pay dirt directly into the hopper on any terrain angle, which then would feed directly into the trommel that the team was using to separate the rocks from the fines of the pay dirt. The Maximus TFC-80 not only increased the team’s production ability but also was used to return the dredged land back to its original condition after the gold was mined, which is something that the mining team holds as a top priority. In the world of gold-mining, there are very few things that are predictable. Adverse weather conditions, rough terrain, the threat of wild animals always very real and present, and the hurdle of mounting expenses with no guarantee of a pay out, all could very well turn away the average miner to give up their dream of finding real gold. The 316 Mining Team’s tenacity and determination, coupled with the dependability of the high-performance, high-quality Maximus machine turned out to be a winning gold standard combination. Maximus North America welcomes the 316 Mining Team to its booth at ConExpo 2017 in Las Vegas and would like to invite everyone to stop by for autographs and conversation with Turin to speak with him about his experiences with the Maximus product line. The TFC-80 Stacker will be displayed on Silver Lot 1 #S-5007. For more information, call 941/735-8585.
Atlas Copco’s new bucket crushers process as much as 110 tons (100 t) per hour and fit 49,000- to 85,200-lb. (22,226 to 38,646 kg) carriers.
Atlas Copco Construction Equipment’s new generation of bucket crusher attachments offer higher output and greater reliability than previous models. The new bucket crushers — the BC 2500 and BC 3700 — process about 80 percent more material due to their hydraulic drive system. The BC 2500 fits 24- to 33-ton (21.7 to 30 t) carrier weight classes, and the BC 3700 fits 30- to 42-ton (27 to 38 t) carrier weight classes. “The new bucket crushers allow contractors to increase the versatility of carriers, especially on demolition, recycling and road construction applications,” said Rich Elliott, Atlas Copco product manager, hydraulic attachments. “The powerful drive systems and high reliability make them an ideal alternative to mobile jaw crushers for cramped worksites. Plus, they can process a wide range of materials, including aggregate, asphalt and concrete.” The attachments feature powerful components that allow carrier operators to crush as much as 110 tons of material per hour. The drive system — two hydraulic motors and a timing belt — generates the high torque needed for powering the crushing jaw. The attachments also feature a reverse
function to easily remove any blockage by pushing material back through the inlet. Crushing material on site allows contractors to save on transportation costs to a landfill or processing center since they can fit more material in each truck load. They also can reuse the crushed material on site as backfill, which reduces the costs associated with hauling in material. Atlas Copco designed the attachments for high reliability and maximum uptime in challenging worksite conditions. For example, Atlas Copco’s internally mounted drive system eliminates protruding components to minimize the risk of dust entering the hydraulic system and to protect key components from flying debris. Additionally, operators can control the diameter of the crushed materials by easily adjusting the jaw outlet without any special tools. This keeps set-up times to a minimum and allows operators to create varying material sizes. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 5, 2017 • Page 37
234 East O Street • Colton, CA 92324 800-949-9014 • Fax: 909-825-4569 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303
CUTTING EDGE SUPPLY
www.crispindustries.com 323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 Seguin, Texas 78155 • 830-372-1110
CRISP INDUSTRIES, INC.
Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.
A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates
www.compassequip.com 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 • Fax: 530-533-7657
COMPASS EQUIPMENT
WHEELER CRUSHING SYSTEMS www.wheelercat.com/crushing 801-679-4721 info@wheelercat.com
451 North Lund Highway Cedar City, UT 84720
2366 South 1900 West Ogden, UT 84401
5300 West Wheeler Way Hurricane, UT 84737
1345 South State Street Salina, UT 84654
95 North 1000 West Logan, UT 84321
4901 West 2100 South Salt Lake City, UT 84120
239 North 1800 West Lindon, UT 84042
1831 S. Highway 191 Moab, UT 84532
1345 South 1500 East Vernal, UT 84078
www.westate.com 3809 Hwy. 312 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553
WESTATE
#TheMetsoWay
Page 38 • February 5, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Bunyon Bros. Tree Service Relies on Bandit for Its Business BANDIT from page 35
1000 trees in two weeks that he’ll also be tackling with The Beast. That’s in addition to daily removals and trimming projects, not to mention their work for both the city and the county — everything from parks to roadways. They are also contracted to the city which puts them on-call 24 hours a day in case of emergencies. As a result, Bunyon Bros. is the largest tree service operation in the area. And they’re always busy. “The drought is what’s driving the business right now,” said Rinell. “It’s killing trees all over the place. We didn’t get five inches of rain all last year, and now with El Nino, people are thinking they should get the big trees over their homes taken down before the storms do, but they want it done right now. We’re backed up a month; they’re almost angry because they have to wait. But the El Nino, it seems to be hitting up north and down to the south, but it’s missing us.”
The drought is certainly bad, but business is good for Ron and his company. He’s continually added employees over the last few years, growing Bunyon Bros. into a multi-million-dollar company. Part of that success is certainly due to his eye for efficiency and getting the most from his investments. He only employs the best of the best, and his philosophy for purchases is that he should be making ten times the investment of the machine. That alone says something about The Beast’s earning potential for companies like Bunyon Bros Tree Service. But the real key to Ron’s success is the same kind of determination that separates those who work to get by, versus those who work to get ahead. That’s easy to understand once you hear the two-part origin story of Bunyon Bros., because it’s really something. I really like the support team from Bandit; the customer service is great — the designs are great too.
“I had a friend who had 7000 acres, and his father wanted us to clear it so we started cutting trees,” said Rinell. “He was a professional bull rider and his friend was also a bull rider, and I was a jock and I had a friend who basically drank beer and cut trees. We were all sitting around the barbeque one evening just bragging it up, comparing ourselves to ‘our brother’ Paul Bunyan and arguing about where he was originally from. We’d had a few drinks and were really getting steamed with each other when one of the guys said ‘you each say you’re Paul Bunyan’s brother? I guess that makes you the Bunyan brothers.’ And that’s when Bunyon [with an O] Brothers Tree Service was born.” As neat as that story is, the Bunyon Bros. of today stems from a very different set of circumstances. “I was young and dumb; the guys and I dissipated for a while and I got in some trouble,” said
Rinell of his early days. “I turned it around, went to school, got a degree in international business, but when companies found out about my past, I couldn’t get a job. I’d sold all the tree equipment I’d had and I swore I wasn’t going back, but I bought the equipment back and opened my own business. I got a contractor license and went legit with the company in 2000. At that point I was basically homeless, but I had nothing else.” Working as the sole person behind the company, Ron gradually built Bunyon Bros. to the company it is today. For the longest time, he ran chippers from a different manufacturer until one of his climbers talked up the benefits of Bandit. Ron bought his first Bandit chipper four years ago, and he’s bought one every year since. “I really like the support team from Bandit; the customer service is great,” he said. “The designs are great too. We had problems on the other chippers with the throat being too large; there was too
much space between the feed wheels and the drum and the brush wouldn’t feed right. I also like the four knives on the model 1590 as opposed to the two-knife setup on others. And I love my Model 1890 — it grabs material right away, and it has 225 hp on a single axle with dual wheels. For transporting around these parts, double-axle machines are just too long. That makes a big difference in towing.” With his breakfast cravings satisfied and a few phone calls answered, Ron headed off to work at a company he didn’t expect to build, in a field he didn’t want to be a part of. But in his words, it all turned out to be a blessing in disguise. “Here I am 15 years later, living in the happiest place in the nation with a wonder multi-million dollar business and an awesome daughter. Life is good!” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
MB Crusher Receives ISO Recertification for Quality MB Crusher recently went through an ISO 9001 recertification audit, in which the company’s product quality and production management was considered. At the end of the evaluation, MB received a score of 5 out of 5 for the ISO 9001:2008 recertification. The ISO 9001:2008 has several requirements an organization or company must have in order to receive this certification. The lead auditor evaluates the quality of the company’s management system and ability to consistently produce quality products to meet the needs of customer satisfaction and requirements. With the ISO 9001:2008 certification, MB’s products are shown to have the highest quality system management in producing its machines for its customers. The company’s production method is so advanced that the company can warrant the highest quality of its products. The certification reassures customers are receiving the best quality products. “We are very excited to receive a 5 out of 5 score on the ISO 9001:2008 recertification,” said Miriano “Max” Ravazzolo, CEO of MB Crusher America. “We have men-
tioned before that our products are produced at the highest quality. Now after this audit, there is no doubt about it. Customers can be certain they have the best machines.” MB offers crushing and screening attachments, 360-degree rotation grapples and dual head rotary drum cutters for a wide scope of work, which includes demolition and excavation, road work, quarries, mining, pipeline work and environmental reclamation projects. MB’s attachments use the hydraulic system on excavators, skid loaders and backhoes, and allow contractors the flexibility to work in tight areas, difficult access locations, steep slopes and urban areas. Contractors will be able to reuse materials immediately at the job site and provide a greener option in recycling waste materials. By reusing the materials, contractors and businesses can begin saving time and money in reducing waste and trucking costs. For more information, call 855/622-7874 or visit www.mbamerica.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 5, 2017 • Page 39
MAKING NOISE AT CONEXPO 2017!
4043TR Recirculating Impact Crusher
JXT Tracked Portable Jaw Crusher
Visit us at Booth #C32313 and see how we help you CRUSH EVERY JOB! TM
Spyder 514TS Portable ortable Screen Plant
American-Made Innovation Since 1966 800-837-3344
7440-927-3464
email@screenmachine.com
See them now at www.screenmachine.com
Page 40 • February 5, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
EXHIBITOR AT Silver Lot 1 S-5007
The Gold Standard in Mobile Crushing and Screening
Come meet the Stars of the hit TV Show “Gold Rush” and see the MAXIMUS machine that is used on the show!
www.MaximusNorthAmerica.com Aggregate Materials AR & OK 866.558.0822 aggmat.com
AggregateMining Products CA 951.277.1267 aggmp.com
Aggwood Northeast Inc NY, CT & RI 508.241.9044
Construction, Crane & Tractor NJ 732.752.2828 constructioncraneandtractor.com
EESSCO ME, VT, NH & MA 781.294.8888 eessco.com
Riley & Associates NC, SC & TN 800.768.8246 rileyminingeq.com
Screen Services DE, MD, VA, WV, PA 888.717.2211 screenservicesllc.net
TK Equipment Sales & Service MN & WI 763.742.0203
T-K-O Equip Co TX 800.477.1036 tkoequipment.com
Viking Aggregate Equipment ND, SD & IA 952-652-2046 vikingaggregate equipment.simdif.com
Porta-Max Systèmes Inc Eastern Canada 888.841.0957
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 5, 2017 • Page 41
CRUSHING
MA ATERIAL TERIAL HANDLING HAN NDLING
SCREENING
TRACKS
www.modernmachinery y.com
WASHING W ASHING & CLASSIFYING CL LASSIFYING
.
970-259-0455 970 259 0455 307-634 307 634 4-5149 4 5149 www.powermotivecorp.com p p
The complete source for equipment in th he aggregate, construction and recycling industries. tries. Offering industry-leading brands such as the Piioneer Jaw Crusher, Kodiak® Plus Cone Crusher, SuperS Stacker® ® ® ® Extendable Stacker, ProSizer Mobile Screening g Plant, Combo Screen, Vari-Vibe a High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 0 equipment, Fast Trrax, Global Track and FastPack.
www.k kpijci pijci.com com
Page 42 • February 5, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
234 East O Street • Colton, CA 92324 800-949-9014 • Fax: 909-825-4569 Phoenix, AZ • 800-729-1473 N. Las Vegas, NV • 702-649-1303
CUTTING EDGE SUPPLY
Metso’s Lokotrack® LT106™ jaw crusher: Meeting your demands for high capacity with maximum efficiency That’s how we make the big difference, the Metso Way.
www.compassequip.com 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 • Fax: 530-533-7657
COMPASS EQUIPMENT
www.crispindustries.com 323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 Seguin, Texas 78155 • 830-372-1110
CRISP INDUSTRIES, INC.
www.wheelercat.com/crushing 801-679-4721 info@wheelercat.com
WHEELER CRUSHING SYSTEMS 451 North Lund Highway Cedar City, UT 84720 5300 West Wheeler Way Hurricane, UT 84737 239 North 1800 West Lindon, UT 84042 95 North 1000 West Logan, UT 84321 1831 S. Highway 191 Moab, UT 84532
2366 South 1900 West Ogden, UT 84401 1345 South State Street Salina, UT 84654 1345 South 1500 East Vernal, UT 84078 4901 West 2100 South Salt Lake City, UT 84120
www.wagnerequipment.com 18000 Smith Rd. • Aurora, CO 80011 303-739-3000 • Fax: 303-739-3191
WAGNER EQUIPMENT CO. Burlington, CO 719-346-7880 Colorado Springs, CO 719-390-7316 Durango, CO 970-259-2001 Grand Junction, CO 970-242-2834 Hayden, CO 970-276-3781 Pueblo, CO 719-544-4433
Windsor, CO 970-278-1750 Yuma, CO 970-848-2911 Albuquerque, NM 505-345-8411 Farmington, NM 505-327-5331 Hobbs, NM 575-393-2148 El Paso, TX 915-821-7651
www.westate.com 3809 Hwy. 312 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553
WESTATE
Improve the efficiency and profitability of your crushing operation with the redesigned Lokotrack® LT106™ jaw plant. New features, including a radial side conveyor, high inertia flywheels, and an IC700™ process control system, ensure high productivity, user-friendly operation, and good mobility in tough crushing applications. The LT106 is also available with Metso’s Fleet Management technology, providing remote monitoring of functions, parameters, and location for more efficient operation. Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 43
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 2-3 DH Call McLaren 888-492-4230
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 2-3 DH Call McLaren 888-492-4230
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 2-3 DH Call McLaren 888-492-4230
Serving the Construction Industry Since 1989 Trench Shoring - Confined Space - Pipe Plugs Rentals - Sales - Service 2-3 PK 800-828-8505
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.
CLASSIFIEDS
Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.
“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states .............................................................Call
For more information, call Construction Equipment Guide today at
Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us
800/523-2200
EXCAVATORS
Hydraulic Excavators 2013 JCB JS160, 38,000 lbs. Operating Weight, Inventory bucket, Used condition, 3,800
3-4 TM
Mini Excavators
Skid Steer Loaders
2014 John Deere 35D, EROPS, Cab w/ A/C & Heat, 12’’ bucket, Front blade, Aux. Hyd, 12’’ Rubber tracks, Quick coupler, 3 Cycle Yanmar engine, 1,671 hours.. $36,500.
2015 CAT 272D, EROPS, A/C, 74’’ bucket, Aux. Hyd, 12x16.5 tires, 4 Cycle Cat engine, 316 hours........................ $46,500.
hours........................ $59,900. Casey Equipment 224-200-4211 2006
Komatsu
PC160-7,
Hendrix Machinery, LLC 1-936-327-5430
LOADERS Backhoe Loaders
2014 CAT 262D, EROPS, A/C, 72’’ bucket, Aux. Hyd, 12x16.5 tires, 4 Cycle Cat engine, 471 hours........................ $39,500.
nect bucket, 32’’ Pads, 4 Cyl. Komatsu engine, 9’2’’ Wide, 4,521 hours.............. $49,500. Hendrix Machinery, LLC 1-936-327-5430
Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 TRENCHING EQUIPMENT 2010 Ditch Witch RT45, OROPS, 6’’ Trench, Slide boom, 64’’ Tilt Blade, 3 Cycle Deutz engine, 732 hours........ .................................. $17,500. Hendrix Machinery, LLC 1-936-327-5430
Hendrix Machinery, LLC 1-936-327-5430
MATERIAL HANDLERS
Like
EROPS, A/C, 36’’ Quick con2005 CAT 420D Backhoe Loader, Front Clam Bucket, 18’’ Rear Bucket, Breaker attachment, 4,755 hrs........ $34,900.
‘04 Sennebogen 825M-D, Hyd. cab, 825.0.1255, 45’ reach, mag box (15RW), Fair condition, 9,000 hours............ ................................ $160,000.
Casey Equipment 224-200-4211
Gibson Machinery, LLC 440-439-4000
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 2-3 EB
®
DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?
$40
ONLY
Construction Equipment Guide is THE Place to List It!
2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.
Call 800-523-2200
or go online to place your ad
on
www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!
Page 44 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted
WANTED: JOHN DEERE EXCAVATOR & LOADER I HAVE AN IMMEDIATE NEED FOR AN EXCAVATOR AND POSSIBLY A LOADER IF THE PACKAGE IS PRICED RIGHT. PLEASE ONLY OFFER MACHINES THAT FIT REQUIREMENTS. COULD BE ANY OF THESE MODELS ZERO TAIL OR TRADITIONAL WITH THE FOLLOWING OPTIONS: DEERE 225D OR 245G, 240D OR 250G, 270D OR 290G. UNDER 3500 HRS, LONG STICK, HYD THUMB, HYD COUPLER, BEST PRICE. DEERE 644K OR 724K. UNDER 4000 HRS, HYD COUPLER, RIDE CONTROL, BEST PRICE. PERFER WESTERN OR MIDWEST US FREIGHT LOCATION. CONTACT: CALEB COLBORN PH: 208-757-3564 EMAIL: CALEB@DOUBLEEDGE EQUIPMENT.COM FAX: 208-403-0363 –––––––––––––––––––––––––––––––– WANTED: CASE 1150C DOZER 34X6 PYRAMID SHOES NEED 2 SOME CALL THEM ATEX SHOES. CONTACT: DAVID RESTER PH: 901-490-8888 EMAIL: HIGHFLYR@BELLSOUTH.NET FAX: 731-635-3366 –––––––––––––––––––––––––––––––– WANTED: CAT 950, 950B, 950F AND 950E WANTED TO BUY CAT WHEEL LOADER 950, 950B, 950E, 950F, 966D AND 966F IF YOU HAVE ANY PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESAERA PH: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: KOMATSU EXCAVATOR PC300-5 & PC300-6 CONTACT: ABDAL PH: 415-687-0337 EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT 950 B AND 950 E I AM LOOKING FOR 950 B AND 950E CONTACT: ALI PH: 206-802-5306 EMAIL: PIGL_PK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: WANTED TO BUY CATERPILLAR 140G, 140H RUNNING OR NON RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ PH: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: USED 12G MOTOR GRADER WITH RIPPER WANTED TO BUY CAT 12G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM PH: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 ––––––––––––––––––––––––––––––––
WANTED: CATERPILLAR MOTOR GRADER 140G I AM LOOKING FOR CATERPILLAR 140G MOTOR GRADER CONTACT: ILYAS KHAN PH: +923322489350 EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: GRAPPLE TELEX TXC340 2 INTO 3 TINE GENERAL PURPOSE GRAPPLE FOR TEREX TXC340 CONTACT: BRYAN WICKSON PH: 603-548-2037 EMAIL: BTWICKSON@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT E70B PART LOOKING FOR COMPLETE DOOR FOR CAT E70B EXCAVATOR CONTACT: BRIAN PH: 715-216-0138 EMAIL: BRIANBOLDER48@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: JD 350B TRANS PTO SHAFT WANTED JOHN DEERE 350B DOZER TRANS PTO SHAFT TO MOUNT JD3315 WINCH. PART NO. T21346 CONTACT: ROGER PH: 570-639-3058 EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED: WASTE HANDLER WHEEL LOADER NEED A WASTE HANDLER WHEEL LOADER FOR A TRANSFER STATION. MUST BE A WASTE HANDLER SPEC AND MUST HAVE LESS THAN 2000 HOURS. ACCEPTABLE UNITS ARE: CAT 938H, CAT 930, CAT 926, DEERE 544, DEERE 624, VOLVO L70 AND VOLVO L90 WASTE HANDLER WHEEL LOADERS. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. CONTACT: JOHN STEWART PH: 519-686-1123 EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 595D WANTED TO BUY JOHN DEERE 595D WHEEL EXCAVATOR IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: STEVE PH: 713-659-0593 EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: WANTED TO BUY EQUIPMENT WANTED TO BUY OR SELL WE BUY SELL AND AUCTION HEAVY EQUIPMENT AND TRUCKS! LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: USED BACKHOE LOADER A USED BACKHOE LOADER TO USE ON FARM CONTACT: RONALD EMAIL: JUNKMASTER844@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED: AIR COMPRESSOR WANT TO BUY: USED OR REBUILT AIR COMPRESSOR FOR ATLAS COPCO ROC L8 DRILL EQUIPPED WITH A CAT C13 ENGINE. ATLAS COPCO PART NUMBER: 9822199555 CONTACT: STRICKLAND EQUIPMENT CO. PH: 972-713-0208 EMAIL: MIKEBERRY@ STRICKLANDEQUIPMENT.COM FAX: 972-713-6206 –––––––––––––––––––––––––––––––– WANTED: SWEEPS FOR CASE 1150E SET OF SWEEPS FOR CASE 1150E CONTACT: JOHN RATLIFF PH: 276-608-1507 EMAIL: CMESALES@BVU.NET FAX: 276-591-1239 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE EQUIPMENT JOHN DEERE 544K OR J. UNDER 5000 HRS. MUST HAVE HYDRAULIC COUPLER. JOHN DEERE 700K LT OR XLT. UNDER 1000 HRS. PAT BLADE. RIPPER OPTIONAL. PLEASE SEND PICTURES, BEST PRICE AND LOCATION FOR FREIGHT. THANKS IN ADVANCE. CONTACT: CALEB COLBORN PH: 208-757-3564 EMAIL: CALEB@DOUBLEEDGE EQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: GENERATOR (SCRAPPED OR SOLD FOR PARTS) LOOKING TO HAVE OUR GENERATOR SCRAPPED OR SOLD FOR PARTS. PHILADELPHIA, PA CONTACT: TED MCKEON PH: 215-885-2900 EMAIL: WEB@CEGLTD.COM –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA1100 NEED 4 KOMATSU WA1100'S THAT ARE 3-5 YEARS OLD WITH LESS THAN 10,000 HOURS CONTACT: KEATON CABLE PH: 864-295-7907 EMAIL: KEATON.CABLE@AMECO.COM –––––––––––––––––––––––––––––––– WANTED: NATURAL GAS GENERATOR NATURAL GAS GENERATOR 2 MW 50HZ, QUANTITY 1. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON (PH: 864-574-0404) EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 892E LC EXCAVATOR WITH THUMB CONTACT: TIM BAGWELL (PH: 334-735-2464) EMAIL: BCSLLC3125@GMAIL.COM FAX: 334-735-5402 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 330BL WANTED TO BUY CAT EXCAVATOR 330BL 1997 TO 2001 MODEL. IF YOU HAVE ANY FOR SALE, PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESAERA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 281-727-0415 ––––––––––––––––––––––––––––––––
WANTED: NEEDED TRUCK 830 E KOMATSU 2011 AND UP 5 TRUCK 793D CORE 40000 HOURS AND UP BUDGET 215000.00US NOT MORE AFTER NEEDED TRUCK KOMATSU I NEED 10 TRUCK 830E 2011 AND UP UNDER 12000 HOURS BUDGET 615000.00US EACH FROM USA ONLY NOT ADVERTISED ONLY DIRECTLY NO SALEMAN NO INTERNET OR PAST MINING ONLY CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WANTED:DEERE ENGINE CORES NEED DEERE 6414 AND 6068 ENGINE CORES AND PARTS ENGINES WITH VEE BELT DRIVE CONTACT: SANDY LAKE DIESEL (PH: 724 253 3450) EMAIL: WANTED: LOOKING TO BUY DOOSAN SANDYLAKEDIESEL@GMAIL.COM DAEWOO 140WV FAX: 724 253 4394 LOOKING FOR DOOSAN DX140W YEAR –––––––––––––––––––––––––––––––– 2002-2006, DAEWOO SOLAR 130WV, WANTED: KOMATSU HD605-7 140WV, 180WV, 160WV, 170W-III. IF YOU WANT TO BUY 5 KOMATSU HD605-7 HAVE ANY ONE OF THESE THEN 2008 AND UP MODEL WITH LOW HOURS IF YOU HAVE ANY PLEASE PLEASE CONTACT ME. EMAIL ME PICTURES AND DETAILS. CONTACT: HAMMAD KHAN WHOLESALE PRICE ONLY!!! (PH: 3149984807) CONTACT: ABDAL HAJI SALEEM EMAIL: (PH: 415-687-0337) SALES.INTLBROKERS@GMAIL.COM EMAIL: FAX: 3149984807 HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANU- WANTED: WANT TO BUY CONSTRUCALS. WE ARE LOOKING TO PURCHASE TION MACHINE NEW OR USED SERVICE, SHOP, PARTS, IF YOU HAVE ANY KIND OF MACHINE OPERATOR’S OR OTHER MANUALS PLEASE OFFER ME. DOOSAN DX14W FOR EQUIPMENT OF ALL SORTS (NOT VOLVO 135W, 145W HITACHI EX100WDDAEWOO SOLAR S130W, S140W, SAMINCLUDED TRUCKS AND VEHICLES) . SUNG MX135 DYNAPAC, 251D,252D, WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE 301D, 302D CONTACT: EJAZ AHMAD OR PARTS OPERATION AND YOU HAVE (PH: 3008859412) EMAIL: GEOIMPEX.EJAZ@GMAIL.COM BOOKS OR MANUALS YOU NO FAX: 3008859412 LONGER NEED, OR INVENTORIES YOU –––––––––––––––––––––––––––––––– HAVE NOT SOLD. PERHAPS AS A DISWANTED: CAT MOTOR GRADER 140G CONTINUED PRODUCT LINE. WE WILL I AM LOOKING TO BUY CAT MOTOR PURCHASE IN ANY USEABLE CONDIGRADERS 140G.IF YOU HAVE FOR TION IN ANY AMOUNT YOU HAVE. SALE. PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: GRACE FRANCES CONTACT: NAQIB KHAN PH: 270-849-2270 (PH: 03458818803) EMAIL: TRITOWN1@MSN.COM EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: KOEHRING 505 BACKHOE WANTED: BULLDOZER D10T LOOKING FOR KOEHRING 505 BACKBULLDOZER D10T ENC CAB WITH RIPHOE FOR PARTS, RUNNING OR NOT, PER UNDER 3000 HOURS USA ONLY ALSO INTERESTED IN OLD PARTS AFTER I HAVE BULLDOZER D11T 2010 INVENTORY FOR 505. WITH UNDER 3000 HOURS I NEED CONTACT: ALBERT HARLOW 620,000.00NEG (PH: 267-738-5984) CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: HARLOWCONTRACTING@YAHOO.COM EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: MEDIUM DUTY TRUCK WANTED: GRAPPLE VOLVO 360 FREIGHTLINER M2 26K GROSS VEHIEXCAVATOR CLE WEIGHT AUTOMATIC TRANSMISGRAPPLE FOR VOLVO 360 THAT SION AIR BRAKES HOOKS TO VOLVO S2 QUICK COUPLER CONTACT: KEVIN MANGANARO CONTACT: KEVIN SANSALONE (PH: 302 225 7276) (PH: 856 692-0027) EMAIL: EMAIL: KEVIN@SANSALONEEXCAVATKMANGANARO@BAYSHORETRUCKS.COM ING.COM FAX: 302 652 5358 –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––
WANTED: KOMATSU WA320-5 CLEAN WORK READY MACHINE WITH 5000 OR LESS HOURS DASH 5 ONLY MACHINE CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: SMALLER ENCLOSED TRAILER NEED A SMALLER ENCLOSED UTILITY/SPORT TRAILER 1000- 1500 LB. CAPACITY TOTAL CONTACT: DIANE LAMBRO (PH: 973-875-7181) EMAIL: DIANE@STANDARDELEVATORCORP.COM FAX: 973-340-8458 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 330BL CAT EXCAVATOR 330BL IF YOU HAVE ANY PLEASE SEND PHOTOS & DETAILS. CONTACT: ABDAL HAJI SALEEM (PH: 415-687-0337) EMAIL: HAJICONSTRUCTEST@GMAIL.COM FAX: 96663312326 –––––––––––––––––––––––––––––––– WANTED: CELLULOSE FIBER MANUFACTURER BLOWER COOL MACHINE AND BAGGER AND PLANT CONTACT: GARRY EMAIL: GARRY@ECOFIBRA.NET –––––––––––––––––––––––––––––––– WANTED: DOOR FOR 161 KUBOTA MINI EXCAVATOR NEED COMPLETE DOOR FOR 2008 161 KUBOTA MINI EXCAVATOR. CONTACT: ROBERT (PH: 828-837-8986) EMAIL: TFREALTY@DNET.NET –––––––––––––––––––––––––––––––– WANTED: SNOW WING FOR JOHN DEERE 772G OR 872G MOTORGRADER WE ARE LOOKING FOR A SNOW WING FOR A JOHN DEERE 772G OR 872G MOTORGRADER. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. CONTACT: MARK OR JOHN (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– \WANTED: BOMAG BW24R PARTS PLEASE CONTACT ME BY MY EMAIL. WE HAVE A BOMAG BW24R PARTS NEED TO PURCHASE. PLEASE CONTACT ME AS SOON AS POSSIBLE. THANKS. CONTACT: HONGYA (PH: 15901559975) EMAIL: JLW0001@126.COM FAX: 010-69297410 –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 I AM LOOKING TO BUY HITACHI EX400 AND EX200 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 ––––––––––––––––––––––––––––––––
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 45
ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944
• Toronto, ON February 27 - 28, 2017
• Winter Garden, FL January 28 – February 5, 2017 For: 24th Annual 9-Day Florida Auction
• Las Vegas, NV March 9 - 10, 2017
• Las Vegas, NV Wed., March 8, 2017 For: Late Model Rental Fleet Construction Equipment • San Angelo, TX Sat., March 11, 2017 For: Rental Fleet Construction Equipment & more
• Denver, CO March 2, 2017
• Chehalis, WA March 14, 2017 • Fort Worth, TX March 15 - 16, 2017 BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO
• Dallas (Ft. Worth), TX Tues., March 14, 2017 For: Rentals! Construction Equipment & more
• ONLINE ONLY Thurs., February 9, 2017
• Parkersburg, WV Sat., March 18, 2017 For: Complete Liquidation, Fine Construction Equipment & more
• ONLINE ONLY Thurs., February 23, 2017
• Atlanta, GA Thurs., March 23, 2017 For: Very Large Rental Fleet Equipment • Cleveland, OH Fri., March 24, 2017 For: Retirement Complete Liquidation • Middletown, NY Sat., March 25, 2017 For: Rental Fleet Construction Equipment & support • Toronto, Canada Mon., March 27, 2017 For: Very Late Model Ag & Construction Equipment • Atlantic City, NJ March 30 – April 1, 2017 For: Annual 3-Day Contractors Auction
• ONLINE ONLY Thurs., February 16, 2017
• ONLINE ONLY Thurs., March 2, 2017 • ONLINE ONLY Thurs., March 9, 2017 • ONLINE ONLY Thurs., March 16, 2017 • ONLINE ONLY Thurs., March 23, 2017 • ONLINE ONLY Thurs., March 30, 2017
• Syracuse, NY Sat., May 20, 2017 For: Complete Liquidation Construction Equipment • Canastota, NY Sun., May 21, 2017 For: Annual Landscape & Lawn & Garden Equipment RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Phoenix, AZ Thurs., February 9, 2017 • Houston, TX February 15 – 16, 2017 • Tipton, CA Fri., February 17, 2017 • Orlando, FL February 20 – 24, 2017
• Philadelphia, MS March 22 - 24, 2017 For: Huge 3-Day Public Auction • Philadelphia, MS May 24 - 25, 2017 For: Huge 2-Day Public Auction • Philadelphia, MS July 19 - 20, 2017 For: Huge 2-Day Public Auction • Philadelphia, MS September 12 - 13, 2017 For: Huge 2-Day Public Auction • Philadelphia, MS November 15 - 16, 2017 For: Huge 2-Day Public Auction EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218
BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY February 8, 2017
• ONLINE ONLY March 1, 2017
• Auburn, ME Fri., May 5, 2017 For: Late Model Construction Equipment & more
AL: 334-693-2540
• Wills Point, TX Tues., March 21, 2017 For: Heavy Equipment Auction
• Dighton, MA Thurs., April 13, 2017 For: Estate Auction, Construction Equipment
• Racine, WI Sat., April 29, 2017 For: Rentals! Late Model Construction Equipment
DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768
• Sealy, TX Tues., February 14, 2017 For: Heavy Equipment Auction
• ONLINE ONLY February 15, 2017
• Gray, ME Fri., April 28, 2017 For: Late Model Construction Equipment & more
To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• ONLINE ONLY Thurs., April 6, 2017
• Richmond, VA Fri., April 7, 2017 For: Large Paving & General Contractor auction
• Clarksburg, WV April 20 - 21, 2017 For: Complete Liquidation Retirement Auction
Coming Auctions
• ONLINE ONLY February 22, 2017
• ONLINE ONLY March 8, 2017 • ONLINE ONLY March 15, 2017 BLACKMON AUCTIONS, INC. www.blackmonauctions.com 501-664-4526 • Portland, OR Thurs., February 9, 2017 For: Portland Open • Clinton & Sweetwater, OK February 14 - 15, 2017 For: Truck & Trailer Auction • Stuttgart, AR February 20 - 25, 2017 For: World Famous Backgate Auction • Muskogee, OK Wed., March 22, 2017 For: Construction Open • Little Rock, AR April 18 - 20, 2017 For: 3 Day Contractor’s Auction DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., April 22, 2017 For: Construction Equipment • Prospect, CT Sat., June 24, 2017 For: Construction Equipment
• Cisco, TX Tues., April 11, 2017 For: Heavy Equipment Auction GOODRICH AUCTION SERVICE, INC. www.goodrichauctionservice.com 607-642-3293 • Newark Valley, NY February 17 - 18, 2017 For: Large 2-Day Public Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., February 17, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., April 21, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., June 16, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., August 18, 2017 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY February 8, 2017 • ONLINE ONLY February 22, 2017 • ONLINE ONLY March 8, 2017 • ONLINE ONLY March 29, 2017 • ONLINE ONLY April 12, 2017 • ONLINE ONLY April 26, 2017 • ONLINE ONLY
May 10, 2017 • ONLINE ONLY May 31, 2017 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Perkasie, PA Wed., February 22, 2017 For: Absolute Auction Complete Liquidation Charles J. McCans & Sons Paving • Chalfont, PA Wed., March 1, 2017 For: Absolute Auction Complete Liquidation S&H Landscaping Contractors • Reading, PA Wed., March 15, 2017 For: Morris Kreitz & Sons, Inc. I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., March 3, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., June 9, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction
• Ocala, FL Thurs., February 16, 2017 For: FL Equipment Auction • ONLINE ONLY Fri., February 17, 2017 For: Timed Online • Concord, NC Thurs., February 23, 2017 For: Public Auction • ONLINE ONLY Wed., March 1, 2017 For: Timed Online J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL March 14 - 17, 2017 For: Huge 4 Day Public Auction JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kenmore, WA Sat., February 11, 2017 For: Heavy Equipment and more JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200
• Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Kissimmee, FL February 13 – 17, 2017 For: Unreserved Public Auction – Biggest Auction of the Year! • Las Vegas, NV Mon., March 13, 2017 For: Unreserved Public Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Verona, KY Thurs., February 9, 2017 For: KY Equipment Auction
• ONLINE ONLY Thurs., February 23, 2017 For: Truck & Trailer Auction • ONLINE ONLY Thurs., February 23, 2017 For: Vontz Paving Inventory Reduction Auction • ONLINE ONLY Thurs., March 2, 2017 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • NETAUCTION February 7 - 14 2017 For: Construction Equipment
• Lebanon, TN Sat., March 11, 2017 For: Construction Equipment
JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Blairsville, GA Sat., March 18, 2017 For: Early Spring Fleet Auction
• Carrollton, GA Wed., April 26, 2017 For: Contractors Auction
• Sebring, FL Sat., September 9, 2017 For: Construction & Agricultural
• ONLINE ONLY Thurs., February 16, 2017 For: Construction Equipment
• Brooklyn, MS February 24 - 25, 2017 For: Early Spring Public Auction
INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225
• Sebring, FL Sat., July 15, 2017 For: Construction & Agricultural
• ONLINE ONLY Thurs., February 9, 2017 For: Truck & Trailer Auction
RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395
• Savannah, GA Fri., March 24, 2017 For: New/Used Heavy Equipment Auction
• Sebring, FL Sat., May 13, 2017 For: Construction & Agricultural
PURPLE WAVE AUCTION www.purplewave.com 866-608-9283
• ONLINE ONLY February 8 - 15, 2017 For: Absolute Van Trailer Inventory Reduction Public Auction
• Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction
• Sebring, FL Sat., March 11, 2017 For: Construction & Agricultural
Sat., February 11, 2017 For: Major Heavy Equipment & Truck Sale
MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Midway, FL Wed., February 15, 2017 For: Fleet Reduction: Construction Equipment, Dump Trucks & Support • Pelzer, SC Thurs., March 30, 2017 For: Annual Spring Construction Equipment/Truck Auction McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., February 14, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., March 14, 2017 For: Tractor, Farm & Construction Equipment • Great Mills, MD March 24 - 25, 2017 For: Tractor, Farm & Construction Equipment NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322 • Wrentham, MA
• Lebanon, TN Sat., June 10, 2017 For: Construction Equipment SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., May 6, 2017 For: 8th Annual Spring Auction WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., March 11, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., June 10, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers WILSON’S AUCTION SALES, INC. www.wilsonsauction.com 302-422-3454 • Harrington, DE Sat., March 18, 2017 For: Mid-Atlantic Equipment Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 6 – 11, 2017 For: 43rd Annual 6-Day Heavy Equipment, Trucks & Trailer Auction
J Page 46 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LIQUIDATION AUCTION - P R O H A U L T R A N S P O R T S FEBRUARY 14 & 15
IN
CLINTON & SWEETWATER, OKLAHOMA
OVER (100) TRUCKS
K ILL T RUCKS & (100) T ANKERS
M ACKS , K ENWORTHS , P ETES , V OLVOS , W ESTERN S TARS , D AY C ABS , P ICKUPS , S ERVICE T RUCKS , V AC T RUCKS , H EATER /O IL T RAILERS , M ORE !
BLACKMON AUCTIONS, INC.
List, Photos & Videos at www.blackmonauctions.com
BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. NASTT’s No-Dig Show & ISTT’s 35th International No-Dig DATES: April 9 thru 13, 2017 EVENT LOCATION: Gaylord National Hotel & Convention Center 201 Waterfront Street National Harbor, MD 20745 Phone: 301/965-4000 Who is NASTT? Founded in June 1990, the North American Society for Trenchless Technology (NASTT) is a not-for-profit, educational and technical society dedicated to promoting the benefits of trenchless technology for public awareness through education, training and research. NASTT is North America’s definitive resource for trenchless solutions to aging underground infrastructure and the applications of trenchless technologies. What is No-Dig? Do you know how trenchless technologies can help you find and repair leaks before they become major breaks? Attend NASTT’s No-Dig Show and learn the proactive trenchless technologies that will help prevent this from happening in your city. NASTT’s No-Dig Show is the largest trenchless technology conference in North America, where professionals attend to learn new techniques that will save money and improve infrastructure. Who Should Attend? The overall No-Dig program is focused on one objective: To help you maximize your investment in trenchless technologies, services, and applications. Owners, utilities and municipalities can immediately benefit! For more information on this event, go to http://nodigshow.com/event-overview/
Washington, District of Columbia 20001, USA Planner: Monica Russell MEETING VENUE and HOTEL INFORMATION: Phone: 202/628-2100 Washingtoncourthotel.com (reserve your room today!)
WEDNESDAY, MARCH 1 and THURSDAY, MARCH 2, 2017 PLACE: Saint Paul RiverCentre, Saint Paul, Minnesota March 1st and 2nd are the dates for Minnesota’s Transportation Conference, our state’s largest transportation event. Once again, the Conference will be at Saint Paul RiverCentre. Conference presentations will highlight innovative and emerging topics and trends. Hundreds of people from across the state and all areas of the transportation community will attend. MnDOT, the Metropolitan Council, local governments, contractors and suppliers, and consulting engineering firms, as well as advocates and policymakers, will be represented. Conference sponsorship opportunities are now available. Details are available. For more information or with questions about sponsorship benefits, contact Maddie Grover at 612/624-4938 or cceconf5@umn.edu.
2017 NATIONAL LICA WINTER CONVENTION PLACE: Harrah’s Hotel, Las Vegas, Nevada DATES: SATURDAY, MARCH 4th thru MONDAY, MARCH, 6th March 6, 2017 – 6:00 PM CNA Reception March 6, 2017 – 7:00 PM Caterpillar Awards Banquet For more information on the above event, contact Land Improvement Contractors of America (LICA) (telephone: 908/996-0050).
Missouri Land Improvement Contractors Midwest Construction Safety Conference & Expo DATES: THURSDAY, MARCH 2 and FRIDAY, MARCH 3, 2017 PLACE: ADAMS POINTE CONFERENCE CENTER BLUE SPRINGS, MISSOURI For more information on this Conference & Expo, please go to: http://mlica.org/events/ or contact Deb Dickens, Executive Director, Missouri LICA State Office at Phone: 573/634-3001; Email: MLICA@aol.com.
CONEXPO-CON/AGG, LAS VEGAS, NV, Association of Equipment Manufacturers (AEM) DATES: MARCH 7 thru MARCH 11, 2017 WHERE: LAS VEGAS CONVENTION CENTER, LAS VEGAS, NEVADA Las Vegas welcomes CONEXPO-CON/AGG 2017 to the Las Vegas Convention Center on March 7 thru 11, 2017. Every major construction industry is represented amongst 2,400 exhibitors, including asphalt, aggregates, concrete, earthmoving, lifting, mining, utilities and more. For more information, SALES: 1-866/627-6246; SUPPORT: 1-866/689-5687 or go to http://www.oncenter.com/events/ 2017 Specialized Transportation Symposium details/conexpo-con-agg-2017. Scheduled for February 14 – 17 in Orlando, Florida The Specialized Carriers & Rigging Association (SC&RA) will host the 2017 OREGON LOGGING CONFERENCE Specialized Transportation Symposium, February 14-17, 2017 at the PLACE: LANE COUNTY EVENTS CENTER and FAIRGROUNDS Hilton Orlando Lake Buena Vista in Orlando, Florida. Attendance at EUGENE, OREGON this annual event increases every year, and the 2017 Symposium is DATES: FEBRUARY 23, 24, and 25, 2017 expected to attract 500 specialized carriers, state and federal governWHY SHOULD YOU ATTEND? ment officials, researchers, manufacturers & suppliers to the industry. Two Days of Business Sessions The Specialized Carriers & Rigging Association (SC&RA) is an interOver 26 Quality Speakers national trade association of more than 1,300 members from 46 18 Industry Related Topics nations. Members are involved in specialized transportation, Earn Pro Logger and SAF Credits machinery moving and erecting, industrial maintenance, millwrightEnjoy Social Events ing and crane and rigging operations, manufacturing and rental. For Saturday Fun Family Activities more information, contact the Specialized Carriers & Rigging Members Competitions Association at 5870 Trinity Parkway, Suite 200, Centreville, VA CALL 541/686-9191 FOR MORE INFORMATION! 20120. Phone: 703/698-0291. Fax: 703/698-0297. Email: AASHTO (American Association of State Highway and info@scranet.org. Transportation Officials) GENERAL CONTRACTORS Mark your calendars to join us for the AASHTO 2017 Washington ASSOCIATED AGC’s 98th ANNUAL CONVENTION Briefing! DATES: Tues., MARCH 7, 2017 to Thurs., MARCH 9, 2017 ABOUT THE MEETING The Washington Briefing is an excellent opportunity to collaborate LOCATION: Las Vegas, Nevada with State Departments of Transportation leaders and industry exec- Cultivate, Innovate, Accelerate – Register Now & Save, Early 30, 2016. utives on pressing policy matters. Highlighting legislative develop- Registration Deadline: November ments in all modes of transportation, the 2017 edition of this long- Make your plans to attend the 98th Annual AGC Convention and seize standing forum will focus on the new Presidential administration and your opportunity to cultivate new ideas and partners, see and hear Congress, infrastructure investments opportunities, continued imple- about the latest in construction innovation, and leave with the tools mentation of the Fixing Americaís Surface Transportation Act, and dis- to accelerate your business to the next level. The 2017 Convention cussion of pending and proposed regulatory activities. Given the features a packed program focused on sharing solutions from expeclose partnerships necessary to best serve the traveling public and rienced contractors and industry experts on key construction issues, businesses around the country, the conference will feature key stake- networking events structured so you can make valuable new connecholder groups including Congressional members and staff, federal tions, and opportunities to shape the future of the construction industry and the association. The AGC Annual Convention is your best executive branch leaders, trade associations and media. WHEN: Tuesday, FEBRUARY 28, 2017 to Friday, MARCH 3, 2017 opportunity to enhance your business and advance your career. For more information, contact AGC of America at 703/548-3118; WHERE: The Washington Court Hotel 525 New Jersey Avenue, NW communications@agc.org; www.AGC.org.
DATES:
NATIONAL LICA WINTER CONVENTION 2017 DATES: SATURDAY, MARCH 4 to MONDAY, MARCH 6, 2017 VENUE: HARRAH’S, LAS VEGAS NEVADA ORGANIZER: LAND IMPROVEMENT CONTRACTORS of AMERICA (LICA) WEBSITE: www.licanational.com DESCRIPTION: The Land Improvement Contractors of America (LICA) is a national association dedicated to encourage high standards of workmanship in resource management, land improvement practices and to promote enterprises in the area of land improvement contractCONSTRUCTION TRADES CAREER FAIR FOR WOMEN ing. Men and women with determination, commitment, skills and TIME: 2:00 PM to 4:00 PM (EST) ability to adapt to the constantly changing business environment built PLACE: WYNN BOSTON HARBOR CONSTRUCTION OFFICE LICA’s solid foundation. A committee of past presidents, present offi3 CHARLTON STREET cers and volunteer members meet and revise the Strategic Plan makEVERETT, MA ing changes to meet the future needs of the association. For more The Massachusetts Girls in Trades will hold a Construction Trades information, contact Elaine Levy at Telephone: 630/548-1984 or Career Fair for Women on Wednesday, February 8, 2017 at the Email: NLICA@aol.com. Wynn Boston Harbor Construction Office, 3 Charlton, Street, Everett, MA from 2:00 PM to 4:00 PM (EST). Admission and Parking are MISSOURI LAND IMPROVEMENT CONTRACTORS free! Light refreshments will be served. This event is sponsored by Wynn Boston Harbor and Suffolk CONFERENCE & EXPO MIDWEST CONSTRUCTION SAFETY, CONFERENCE & EXPO Construction. TUESDAY, MARCH 7 to SATURDAY, MARCH 11, 2017 The building trades are actively seeking women who are graduates DATES: LAS VEGAS, NEVADA of career and technical (vocational) programs in areas such as car- PLACE: Professional Growth – Join your peers to share and learn new ideas pentry, bricklaying, floor covering, painting, iron working and many others. This career fair is an excellent opportunity to explore high- while growing your professional network. Benefit Auctions – To connect Military Veterans with industry jobs wage, high-skill careers in union construction. Experts such as union apprenticeship representatives, contractors, and working with the support of the Call of Duty Endowment. Who Attends? – Contractors, dealers and producers…executives, tradeswomen will be present to talk with attendees. Space is limited, so please register by JAN 30 by going to: fleet managers, foremen and more. In other words, your competitors! See Who’s Exhibiting! – Over 2,500 exhibitors in all major construchttps:www.surveymonkey.com/r/r6jnln8. For questions, contact tion industries including asphalt, aggregates, concrete, earthmoving, Jennie Peterson at jennie.peterson@wynnresorts.com. lifting, mining, utilities and more. For more information, you may contact the Missouri LICA State AGC of MINNESOTA (ASSOCIATED GENERAL CONTRACTORS OF MINNESOTA) Office at 573/634-3001 or go to: MINNESOTA’s TRANSPORTATION CONFERENCE http://www.conexpoconagg.com/request-information/
2017 NATIONAL LICA WINTER CONVENTION PLACE: Harrah’s Hotel, Las Vegas, Nevada DATES: SATURDAY, MARCH 4th thru MONDAY, MARCH, 6th March 6, 2017 – 6:00 PM CNA Reception March 6, 2017 – 7:00 PM Caterpillar Awards Banquet For more information on the above event, contact Land Improvement Contractors of America (LICA) (telephone: 908/996-0050).
Concrete Sawing & Drilling Association (CSDA) to Meet in Puerto Rico for the First Time CSDA is heading to beautiful Puerto Rico for the association’s 45th Annual Convention & Tech Fair. Dates: March 14-18, 2017 Puerto Rico is an ideal location for industry professionals to meet, network and relax – a tropical island paradise that remains part of the U.S. and is easily accessible for American and international travelers. CSDA has chosen the luxurious Gran Melia Resort as the convention venue – a highly sophisticated architectural gem nestled on Puerto Rico’s northeastern coast in Coco Beach, Rio Grande. The CSDA Annual Convention is attended by owners, managers and operators from concrete cutting, polishing and imaging companies as well as representatives from manufacturers and distributors who support the industry with products and services. Anyone who falls into these categories should join CSDA for this important networking event. Registration opens September. For more information, visit www.csda.org/convention, call 727/577-5004 or email info@csda.org.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 47
REN REN NTTALS N LS R RENT ENTALS LS R RENT ENTALS LS CONSTR TRUCT UCTION ON EQUIPMENT, TELE TELESCOPIC FORKLIFT LIFTS, B M&S BOO SCISSOR L LIFT TS S, TRUCKS, T TR RAILE LERS, S SU UPP PP PORT EQUIPMENT AHER ERN RENT RENTAL TAL ALS HERC HERC C RENT RENTA TA AL LS NEFF RE NEFF EN NT TA T ALS TH W EDNESDAY, MA WEDNESDA MA ARCH RCH 8TH @ 110 0:00AM 0 :00A M LAS L AS V VEGA EG AS , NEV NE VA DA DA
ADDRES SS: 1800 West Bonanzza Road, Las Vegas, Nevada 89106
SALES MANAGERS & AUCTIONEERS
NOTE: Selling S lli will ill bbe LLate t M Model d l Rental Fleet Equipment that will suit anybody, anyplace, anytime.
HILITES INCLUDE: 276 SCISSOR LIFTS: (18)Genie GS-4390RT, (3)Genie GS3384RT, Genie GS-3268RT, Skyjack SJ9250, (2)Skyjack SJ8850, (23)Skyjack SJ8243, (5) Skyjack SJ7135, (6)Skyjack SJ6832RT, Skyjack SJ6826RT, (8)Skyjack SJIII4632, Skyjack SJ4632, (12)Skyjack SJIII4626, (10)Skyjack SJIII3226, (19)Skyjack SJ3226, (13)Skyjack SJIIIE3219, 219, (117)Skyjack SJ3219, (16)Hybrid brid HB-1430, (11)Hybrid HB-1030,, (3)Genie IWP-30S, Genie IWP-25S, 2007-2006 JLG 20MVL, 2007 JLG 1230ES, 75 BOOM LIFTS: (2)JLG 800S, (3)JLG 8000A, ((7)JLG ) 660SJ, ((13)JLG ) 600SJ, J, ((2)2008-(3)2005 ) ( ) JLG 600AJN, (6)JLG ) 600S, 2008-(4)2005 ( ) JLG 450AJ, JLG 450AJ Series-2, (2)2008-(2)2007-2006 JLG 400S(4x4), (7)JLG 400S, (4)JLG E400AN, 400AN, 2007-(8)2006-(3)2005 JLG G E300AJ, Genie S125, 2014 Genie ie TZ50, (3)Genie Z-34/22, 15 TELESCOPIC FORKLIFTS: (3)Skytrak 10054, (3)Skytrak 8042, (5)Skytrak 6042, (4)Skytrak 6036, 36, 18 HYDRAULIC EXCAVA AVVAATTORS: 2012 Komatsu PC200LC-8, Cat 345BL, Cat 312CL, Kubota KX080, Hitachi EX330LC-5, Hitachi EX200LC-5, 2008 Case CX210B, (5)New TTerex erex TC35-2R, 20155 JD 17G, (2)2009 Bobcat 425ZTS, S, Bobcat 324, 2008 Kubota KX41VR, VR, 2008 Kubota K008T4, 3 EXCAVA AVVAATTOR BUCKETS: Hensley 24in., Hensley 36in., 24in. Digging Bucket, 3 RUBBER TIRED LOADERS: (2)2016 Cat 926M, 2006 Case ase 821E, 2 CRAWLER TRACTORS:: 2011 JD 850KLT LT, 2007 JD 850J, 33 TRACTOR LOADER BACKHOES: (12)2011-(3)2010-(2)2007 JD 310J(4x4), 2007 JD 310G,, (6)2007-(5)2006 Case 580M Series ies 2, (4)2015 Case 580 Super-N, 2 SOIL COMPPAACTORS: (2) Cat 826, 3 ASPHALLTT ROLLERS: Dynapac CA250D, Ammann AV26E, Ammann AV16E, AV16E, 3 VIBRAATTORY O ROLLERS: 2007 Dynapac CA250PD, 2006 Sakai SV201TB, Amm mann AC40P4B, 3 TRENCH ROLLERS: 2009 Multiquip P33HHMR, 2008-2005 Dynapac LP8500, 16 SKID STEERS: 2011 JD 3226D, (4)2011 JD 318D, (3)2010 Bobcat obcat S250, (2)2010-2009 Bobcat S175, (3)Bobcat S70, Case 410 Series-2, Case 420 Series-2, 21 TRENCHERS: (19)Barreto E1624D4, 2008 Barreto E1324D, Ditch Witch 1330HE, ROUGH TERRA RAIN FORKLIFT: 2006 Harlo HP5000(4x4), 0(4x4), 3 FORKLIFTS: 2008 Hyster H360HD, 2006 Hyster H70FT, 2007 Komatsu FG25T16, 5 AIR COMPRESSORS: 2007 IR XP P825WCU, 2007 IR P250WJD, (2)2007 2007 IR P90WIR, Atlas Copco XAS S186JD, 29 GENERAATTORS: 2006 Multiquip DCA400SS, (5)Multiquip DCA100SS, (7)Multiquip DCA70SS, (2)Multiquip DCA45SS, S, (11)Multiquip DCA25SS, Baldor TS25-T T , Wacker G125, 2007 Magnum m MMG100, 28 WELDERS: (5)2008 Multiquip DLW400ES SA, 2007 Multiquip DLW400ES, (4))2005 Multiquip BLW400SS, (2)Multiquip ltiquip TLW300SS, (3)Multiquip SDW225, DW225, 2007 Multiquip GAW180HE E, (2)2006 Lincoln V Vantage antage 500, (9)2006 Lincoln Vantage 400, Miller 42amp, 3 WELDING ACC CESSORIES: 2008 Miller E Wire Feed ed Attachment, (2)2007 Lincoln V275S, 75S, 14 LIGHT PLANTS: (11)Allmandd Nite Lite Pro, (2)Multiquip LLT12D, T12D, Wacker LLTC4L, TC4L, 2 ARR ROW/MESSAGE BOARDS: (2)Wancoo, 3 LOADER LANDSCAPE TRACTOR RS: (2)2007 Case 570MXT Series-1, 2007 JD 210L, 9 CONCRETE EQUIIPMENT: (5)Miller S MB16FF,, Multiquip MC94, (2)2008 Cartt-Away CMT100 Concrete Drum Traailers, 2011 Tooker MM10-8H, WAATER TEER TOWER: 2007 Klein KPT120, 5 SWEEPERS: GMC T7500, (4)Laymor or 8HC, 2 WAATER TER TRUCKS: 2006 Freightliner M2-106, Ford F650, 13 STTAKE AKE TRUCKS: (3)2006 Ford F650, (2)2007-(3)2006 Ford F550, 2008 Ford F450, 2006 Ford F450, 2001 IH 4700, 2008-2002 IH 4300, 2 FLAATTBED TRUCKS: 2007 Ford F650, 2008 IH 43000, 2 VVAN AN TRUCKS: 2007 Mitsubishi FE180, F 2006 Mitsubishi FM260, 2 CAB & CHASSIS: Peterbilt 330, 20077 Ford F550, 4 DUMP TRUCKS: (2)2008 2008 IH 4300, (2)Ford F650, TRUCK TRACTOR: Freightlinerr FLD 120, 5 PICKUP TRUCKS: 20099 Ford F250, Chevy 2500, 2008 Ford F150, 2001 Ford F150, 2004 TToyota oyyota TTacoma, acoma, 5 DETTAACHABLE GOOSENECK SENECK TRAILERS: (5)New Witzco RG50, 47 UTILIT Y TRAAILERS: 2006 Best Trail CP5X10HD D, (2)2005 Best Trail CR85X15MD, ((3)Best Trail 5X10US, (2)Best Trail 4X6US, 4 (2)Best Trail UP4X6T, 2008-(6)2007-(3)2006-(15)2005 8-(6)2007-(3)2006-(15)2005 Barreto E4X6TBT, (3)Barreto E E4X5DGT, 2008-(3)2007-2002 Barrreto E3X4TBT, 2008 Carry-On Trenccher, 2008 Kawasaki, (2)Ryan Sod Cutter Trailer, 23 UTILIT Y VEHICLES: S: 2008 Club Car XRT1550, 2009 Kubota RTV114, (2)20088 Kubota RTV900, (2)2007-(9)20066 JD TX Gator, 2008-2007 Kawasaki ki 3010(4x4), (2)2008 Kawasaki 600, 0, 2007 TTaylor-Dun aylor-Dun MX600, (2)20066 TTaylor-Dun aylor-Dun SS5-36, 2006 Taaylor-Dun aylor Dun B2 B2-10, 10 GOLF CART: 2012 Amersport LM48V, 8 SCRAPP RECYCLING EQUIPMENT: (3)New w 2-Y 2 Yard Stackable Self-Dumping Self Dumping Hooppers, (2)New 1.5 15Y Yard ard Stackable Self-Dumping Self Dumping Hoppers, Hoppers (3) New 1-Y Yard ard Stackable Self-Du Self-Dumping umping Hoppers, 2 TRUCK PPAR ARTS & ACCESSORIES: Rack, TTool ool Box, 3 WHEELS: (40)19.5x5.75, (20)19.5x6.00, 5x6.00, 5 HEAATING TING EQUIPMENT: 2008 008 Heatstar PH40LP, 2007 Heatstar HS400 (3)Scheu 1500Fast, 12 PRESSURE W WASHERS: ASHERS: (44)New Easy Kleen Magnum Gold, MI-T-M CW-3504, (5)MI-T-M CW-25505, MI-T-M JCW-2003, Alto For BID ONLINE t echnica l assis ta nce WS3000GHS, 30 AATT TTTAACHMEN NTS, 53 NEW SUPPORT EQUIPMEN NT, 70 SUPPORT EQUIPMENT. ca ll (919) 595-2907
NEV VAD ADA PERMIT T #: TCP-40806 SALE SITE PHON NE: (770) 537-7386 Eddie America’ss Auction Compan America’ nyy.. Big enough for the industr y leaders, yet perrsonal sonal enoug enough gh for America’s ’s farmer f r..
ALEX LY LY YON O & SON ON
SALES MANAGERS G & AUCTIONEE ERS, INC., BRIDGEPO ORT T,, NY 13030 Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Eveniings) (315) 637-8912 Go to WWW.LY LYON LY YON O AUCTION.COM UCTION COM for a Complete C List, Descriptions, ons and Pictures ons,
Page 48 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 49
. PEERIOD.
FLO ORIDA 2017 2
F FEBRUAR Y 13-17
ww ww.IronPlanet.com/Fllorida
Page 50 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Unrreserv rvved ed public equipment auctions No payments ffor or 120 d days ys – off ffer er eext xtended throug gh March 2017!*
Caterpillar 613C Series II Elevating | Phoenix
Powerscreen Chieffttain 1800 6 x 16 Ft 2 Deck | Phoenix
2014 John Deere 310SK 4x4 Tier 4 Interim | Tipton
1 of 5 – Unused – Caterpillar 320FL | Orlando
Unused – 2015 Vo Volvo A A40G Golden Hauler 50th Anniversary EEdition | Orlando
2013 Caterpillar D6N LGP | Orlando
2010 Tere Terex CS45KM 50 Ton Ton R Reach Stacker | Houston
2008 Ter Terex HC230 230 Ton Ton | Houston Hou
3 of 5 – 2008 Ter Terex R RT555-1 T555-1 55 Ton Ton 4x4x4 | Hou Houston
30,300+ items in 120+ auctions including Phoenix, AZ Houston, TX Tipton, CA Orlando, FL Denver, CO
Feb 9 Feb FFeb eb 15–16 Feb 17 Feb 1 Feb 20–24 Feb 20–2 Mar 2
Las Vegas, NV Chehalis, W WA A
Mar 9–10 Mar 14
Financing & leasing available Up to 100% financing, with no money down.
Auction Company License # 1981, Motor Vehicle Dealer License #1539, Auction Firm #2389, Auctioneer Eddie R. Graham #2237, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Motor Vehicle Dealer License #DLR25867, Auctioneer John L. Korrey # 7016005, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889 OAC. Terms & conditions apply. See rbauction.com
Bid in person or online ▸ No minimum bids or reserve prices ▸ Te Testt and inspectt on-site on▸ Open to the public, free registration
More items added daily Call about selling: 1.800.211.3983
See fu full auction & equipment listing gss at rbauction.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 51
Unreserved public equipment auction No payments for 120 days – offer extended through March 2017!*
2015 Mack GU713 w/McNeilus 11 Yard – Low Mileage
1 of 3 – 2011 Caterpillar 775F
2012 Kawasaki 65ZV-2
Caterpillar D7R
2011 Cemco 2752D 180 Cu Yd/Hr
2007 Terex Pegson 1000MXT Cone
Unused –2016 Dakota 60 In. x 24 Ft Rip Rap Plant
2014 Caterpillar CT660 4000 Gallon
Mack MR688S w/Schwing KVM S47SX
Las Vegas, NV
March 9–10 (Thu–Fri) 8 am
Equipment includes
On-site inspection hours
Location
Mixer trucks, concrete pump trucks, jaw crushers, screening plants, wheel loaders, truck tractors, crawler tractors, hydraulic excavators & much more
Mon–Fri, 8 am–5 pm
10500 Clark Petersen Blvd, Las Vegas
Bid in person or online
More items added daily
▸ No minimum bids or reserves ▸ Test and inspect on-site ▸ Open to the public, free registration
Call about selling: 702.644.2468
See complete listings at rbauction.com/las-vegas
Page 52 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
RENTAL FLEET RENT FLEET AUCT AUCTION TION I CAT, JOHN DEERE RE, CASE CONST STRUCTION EQUIPMENT, VEHICLES, AT ATTACHMENTS NTS, TOOLS
S AT URDA URDAY, MARCH M A RCH 11 1 1 @ 110:00 0:00 AM AM SA SAN S AN A N ANGELO, ANGELO A NGELO TTEEEXAS XA XAS AS S TH H
SALES MANAGERS & AUCTIONEERS
Daymond John, Dick Cheney on Hand at AED Summit AED from page 6
ADDRESS: 808 Strawn S Road, San Angelo, TTexas, exas, 766904
Hyundai Construction Equipment Americas honored seven of its top dealers for 2016 during a meeting of its North American dealers at the AED Summit in Chicago. Hyundai awarded its top honor of Dealer of the Year to Rob’s Hydraulics Inc. of Grimesland, N.C., and for the first time, named a Rookie Dealer of the Year, with RECO Equipment, of Belmont, Ohio, earning that title. Selected as top performing Hyundai construction equipment dealers of 2016 were CIMI Inc., Levis, Quebec; Chappell Tractor Sales Inc., Milford, N.H.; Four Seasons Equipment Inc., Houston; Modern Group Ltd., Bristol, Pa.; and Rueter’s, Carroll, Iowa.
HILITES INCLUD DE: 19 HYDRAULIC EXCAVA AVVAATTORS: O (3)2013 JD 75D, 2015 JD 60G, 60G (2)2015 JJD 35G, (3)2015 JD 26G, (2)2015 015 Hitachi 35G, 35G 2015 Hitachi 26G, 2015 Hitachhi 17G, 2010 Bobcat E42, 20100 Bobcat E32, (4)New TTerex erex TC35-2R, RUBBER R TIRED LOADER: Case 521D,, 9 TRACTOR LOADER BACKHOES: 2015 Case 580 Super N(4x4), (3)2011-(2)20110 JD 310J(4x4), (2) JD 310J(4x4), 2014 JD 4520, 0, RUBBER TRACKED SKID STEEER: 2014 Cat 259D, 11 SKID STEERS: Cat 272D, 2016-2014 Cat 262D, Cat 259D,, 2012 Cat 226B3, 2014 JD 332E, (4)2010 Bobcat at S175, 2010 Bobcat S70, AGR RICULLTURAL TURAL TRACTOR: 2015 JD 3032E, TRACTOR O LOADER: 2013 Kubota B33500HDSC 4x4, SCISSOR LIFT: Genie GS2619, 2 STTAKE AKE TRUCKS: (2)2007 Ford F550, PICKUP TRUCK: 2008 Ford F150, 2 UTILIIT Y VEHICLES: ((2)2010 ) Bobcat 2200S, 5 GENERAATTOR ACCESSORIES: (5)New Generac Mac 150kva Trailers, 8 SCRAP RECYCLING EQUIPMENT: (3)New 2-Y Yard Stackable Self-Dumping Hoppers, (2)New 1.5 Yard Stackable Self-Dumping Hoppers, (3)New 1-Yard Stackable S Self-Dumping Hoppers, ATTTAACHMENTS: S (17)Skid Steer: New 3/4cu.ydd. Concrete Placement Bucket, (6)New Fork Exteensions, (8)New Attach Framess, New JBX 4000 48in. Pallet Forks, New 12x16.55 12-ply Tires, 52 NEW SUPPOR RT EQUIPMENT.
Felling Trailers has a track record of innovation that has set them apart in trailer manufacturing.
For BID ONLINE technical assistance call (919) 595-2907
SALE SITE E PHONE: Mike Blake (315) 378-5037 TEXAS LICENSE: 15791 Jack H. Lyon
ALE EX LY YON ON & SO ON
SALES MANAGERS & AUCTIONE EERS, INC., BRIIDGEPORT T,, NY 13030 1303 30 Phone: (315) 633-2944 • Fax: (315) 633-8010 6 Syracu use, NY (Evenings) (315) 6377-8912 Go to WWW.LY LY YONA ONAUCTION.COM for a Complete List, Deescriptions, and Pictures
Handling booth duty for Doosan Infracore Construction Equipment America is Chad Roehrich.
The Rototilt fully rotational coupling system has set a new standard of excellence and versatility.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 53
SA AVE VE THE DA ATE TE
Un nreserved Public A uction GREA ATER TER LAS VEGAS VEGAS, S, NEV VADA ADA | MARCH 13 1 TH CONS SIGN EQUIPMENT AND TRU UCKS NOW FEATTURED SELLERS
WH HY SELL WITH CA CAT T AUCTION SERVICES S IronClad Assurancce builds buyer confiddence Drivve the right buyers too the sale | Higher seelling prices Strong local participation p | Globaal exposure to 1.7 MILLLION IronPlanet userrs Our exclusive IronClad Assuurance® equipment conditionn certification enables buyerss to bid with a high degree of confidence dence resulting in better auction ction prices for sellers. Consign todaay - Please contact your loocal representative VP - SOUTHWESTT REGION CHAD WEIDEMANN (612) 418-9988 cweidemann@IroonPlanet.com
MANAGING SALES DIRECTTOR - CANADA SUE MCGREGOR (780) 238-1560 smcgregor@IronPlanet.com m
CENTRAL & SOUTHERN CALIFORNIA NIA MARK COGBURN (559) 805-4749 05-4749 mcogburn@IronPlanet.com
VP - NORTHWESTT REGION KEITH SPICER (801) 889-7658 kespicer@IronPlaanet.com
COLORADO MIKE FARGHER FARGHER (303) 396-5117 mfargher@IronPlanet.com
UTTAH BRIAN MILNE bmilne@IronPlanet.com
SALES DIRECTOR R - SOUTHWEST REGION PHIL HA AWKINS WKINS (405) 657-9925 phawkins@IronPllanet.com
NEV VAD ADA STEVEN GREEN (503) 341-6485 slgreen@IronPlanet.com
SALES DIRECTOR R - MOUNTTAIN AIN REGION JIM ABBOTT (970) 631-5422 jabbott@IronPlanet.com
ARIZONA KEITH RICHARDS (480) 456-6699 krichard@IronPlanet.com
www.IrronPlanet.com//LasVegas
(801) 719-7724 7
Cat Auction Servicces an IronPlanet Marketplace ace
California Auction Company Bond ##70259785. Preliminary list to date. Equipment subject to change. © 1999-2016 IronPlanet, Inc. All Rights Reser Reserved. IronPlanet® and IronClad Assurance® are registered stered ser service marks of IronPlanet, Inc. All other markss and brands are the property of their respective owne o ers.
Page 54 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SONS INC
LINK-BELT EXCAVATORS................................................................. 28,29
LAS VEGAS NV 3/8....................................................................... 47
MAXIMUS NORTH AMERICA.................................................................40
SAN ANGELO TX 3/11..................................................................52
METSO MINERAL SCREENING............................................................ 37
ALLU GROUP.......................................................................................... 13
METSO MINERALS CRUSHING ........................................................... 42
ARTIC SNOW & ICE CONTROL PRODUCTS.......................................15
MINNICH MANUFACTURING...................................................................8
ATI CORPORATION/LEVEL-BEST.........................................................15 BARGAINS...............................................................................................43 BLACKMON AUCTIONS CLINTON & SWEETWATER OK 02/14-15................................... 46 BOBCAT COMPANY................................................................................18 CEG SCALE MODELS............................................................................ 19 CEG WANTED......................................................................................... 44
NORAM............................................................................................... 30,31 RANSOME EQUIPMENT SALES LLC/LRH........................................... 44 RITCHIE BROS. AUCTIONEERS UNRESERVED PUBLIC AUCTIONS............................................ 50 LAS VEGAS NV 3/9-10..................................................................51 ROAD BUILDERS MACHINERY & SUPPLY.......................................5,13
CHICAGO PNEUMATIC.......................................................................... 16
TEREX CRANE........................................................................................27
CLASSIFIEDS.......................................................................................... 43
THE SCREEN MACHINE........................................................................ 39
CONEXPO................................................................................................. 9 CONSTRUCTION EQUIPMENT GUIDE ..................................... 14,34,48
ARIZONA SUPPLEMENT
CURRY SUPPLY CO................................................................................. 7
CONSTRUCTION EQUIPMENT GUIDE ................................................11
DOMINION EQUIPMENT PARTS........................................................... 12
DITCH WITCH OF ARIZONA...............................................................3,10
DOOSAN PORTABLE POWER.............................................................. 56
FLASKA JCB.............................................................................................. 7
DYNAPAC................................................................................................ 23
RED MOUNTAIN RENTALS......................................................................5
FELLING TRAILERS................................................................................26
WSM AUCTIONEERS............................................................................. 12
FLANGE LOCK........................................................................................ 18 FLECO ATTACHMENTS..........................................................................13 FLUID CONTROL SERVICES.................................................................30 GRINDERCRUSHERSCREEN.COM......................................................38 GROVE CRANE CO-OP......................................................................... 55 HENDRIX MACHINERY LLC.................................................................... 3 HENNESSY INTERNATIONAL............................................................... 30
TEXAS SUPPLEMENT BANE MACHINERY.................................................................................16 CONSTRUCTION EQUIPMENT GUIDE................................................ 15 DITCH WITCH WEST................................................................................9 EAGER BEAVER TRAILERS.................................................................... 3 FECON..................................................................................................... 11
IRONPLANET KISSIMMEE FL 02/13-17...............................................................49
KUBOTA SVL........................................................................................... 11
LAS VEGAS NV 3/13....................................................................53
MCCOURT & SONS................................................................................ 13
KCM ........................................................................................................ 17
ROMCO EQUIPMENT CO........................................................................ 2
KOBELCO.................................................................................................. 2
TROPHY TRACTOR..................................................................................7
KOMATSU AMERICA CORP................................................... 20,21,32,33
VERMEER OF TEXAS-LOUISIANA..........................................................5
KPI-JCI..................................................................................................... 41
WAUKESHA-PEARCE INDUSTRIES INC .............................................11
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 5, 2017 • Page 55
APA PACIT Y AN NT N TAGE
UP TO
47 %* *
L
MORE
Compared to GMK5150 competition
adius with maximum counterweight
NEW W GMK5150 and GMK5150L
AN NYWHERE. The h strength e h and d mobility bili to handle h dl more jobs. j s. The new w GMK5150 and GMK5150L 150L deliver great ROI due to outstand ding lifting capacitiess and greater jobsite j accessibility.
liftting capacities in oun nterweight configurations GMK5150L High-per -performing boom capable of lifting g 11,6 t with 60 m boom — ideal forr tower crane rigging GMK5150 with 51 m boom
•150 t maximum capacity •Narrow w 2, 2 75 m width on 445/95R25 /95R25 tires •Fuel-effi fficient single -engine d design
Compact p dimensions sions with reduced overall length ength and width
Impressiive lifting, jobsite man neuverability and fuell efficiency help you u achiev hi e greater profi fits. fi
Crane Control System y (CCS) with Boom Configurator ator enhances operator controll and efficiency
Contact your local Grove dealler, or go to www.manitowoccranes.com i m to learn more.
Easy operator access ccess on the crane for secure, fast riigging; especially when working att heights
Kirby-Smith Machinery, Inc.
Western Pacific Crane & Equipment
H&E Equipment Services
www.kirby-smith.com
www.wpcrane.com
HE-equipment.com
Oklahoma City, OK 800-375-3339 Tulsa, OK 800-375-3733 Kansas City, KS 877-851-5729 St. Louis, MO 866-279-1392
6720 Arctic Blvd. 8600 Calabash Ave. 19602 60th Avenue NE Anchorage, AK 99518 Arlington, WA 98223 Fontana, CA 92335 855-342-7263 253-254-7950 562-286-6618 3521 Alken Street Fax: 909-356-1340 91-210 Kalaeloa Blvd. Bakersfield, CA 93308 Kapolei, HI 96707 275 W. Larch Road 855-927-2637 808-682-7263 Tracy, CA 95304 209-597-3824
Belgrade, MT 406-388-2308 Billings, MT 406-259-9720 Boise, ID 208-388-3323 Salt Lake City, UT 801-974-0388
St. George, UT 435-674-2994 Las Vegas, NV 702-320-6500 Phoenix, AZ 602-232-0600 Tucson, AZ 520-770-1120
Albuquerque, NM 505-764-8100 Dallas, TX 972-986-0910 Houston, TX 713-433-6411
Page 56 • February 5, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
DOOSAN. AN POWERFUL W SOLUTIONS. UTIONS At Doosan, we do more than engineer products. We engineer solutions. Robust compressors that weather her the harshest conditions. Generators and light towers that match innovation with efficiency. Unrivaled service and support, day or night. That’s a the way we’ve operated for over 100 years, and the way we’ll do business for dec d ades to come.
AIR COMPRESSORS / GENERATORS / LIGHT TOWERS Air Compressor Solutions, Inc. TEXAS
Odessa (432) 335-5900
Ditch Witch of Arizona ARIZONA
Phoenix (602) 437-0351
Ditch Witch of Southern Arizona ARIZONA
Tucson (520) 579-0261
Sierra Machinery, Inc. www.sierraelpaso.com
TEXAS
El Paso (915) 772-0613
NEW MEXICO Artesia (575) 746-6592
DoosanPortablePower.com | 800.633.5206
Volvo Construction Equipment & Services CALIFORNIA
Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244
San Diego/ Lakeside (619) 441-3690 Corona (951) 277-7620
Papé Material Handling Inc.
OREGON
Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444
www.papemh.com
NEVADA
Sparks (775) 356-9333
WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386
©2017 Doosan Infracore Portable Power
Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300