Western 1, January 2, 2022 by Construction Equipment Guide

Published Nationally

$3.00

Western Edition

January 2 2022 Vol. XXIII • No. 1

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Granite, NV5 Crews Rebuild Belle Terrace Contractors Make More Than 80 Modifications in Bakersfield, Calif.

Hawthorn Cat Donates Time, Money at Food Drive...8

By Chuck MacDonald

Komatsu Expands Range of Hydraulic Breakers...32

It’s not often that creativity and construction get to show up in the same sentence, yet contractors, utilities and the city of Bakersfield, Calif., teamed up to use creativity and sweat to handle more than 80 modifications to the original plans and successfully complete the Belle Terrace Operational Improvements Project with no citations or claims. The $41 million project was part of the multi-phased Centennial Corridor Interchange, an important section of routes through central California. The improvements on SR 58 and SR 99 included the replacement of two bridges. The work will allow increased traffic volumes and reduce congestion. The project was started in the fall 2018 and completed in March 2021. “Our working relationship remained strong even when ancillary factors had the

Western Star Adds 47X to Its Purpose-Built Lineup...38

Table of Contents ................4 Aggregate & Recycling Section..........................13-19 Attachments & Parts Section ......................................31-36

CEG CORRESPONDENT

see BELLE page 12

Contractors Brace for Boom in Renewable Energy Projects U.S. Energy Sector Primed for Five-Year Growth Spurt

Truck & Trailer Section ........ ......................................38-39

By Lucy Perry

Auction Section ...........42-45

The outlook for energy-related construction is a positive one. The renewable energy sector is preparing for a boom over the next five years and the fossil fuels industry is fighting hard to hold its place in the battle for power. That all bodes well for the construc-

Business Calendar.............44 Advertisers Index ..............46

The $41 million Belle Terrace Operational Improvements Project was part of the multi-phased Centennial Corridor Interchange, an important section of routes through central California.

CEG CORRESPONDENT

tion industry, which will greatly benefit from the expansion, if longstanding pricing and materials acquisition challenges can be overcome. Noting 2021 has been another banner year for wind and solar construction, the International Energy Agency (IEA) is forecasting a five-year sector boom even in the see ENERGY page 45

Solar, hydro and wind generation accounted for all the growth in power generation during 2020, while coal, natural gas and nuclear output declined.

Page 2 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

#92948, 2017 BOMAG BW138AC-5, 1200 HOURS ....................................................$39,500

#93105, 2017 BOBCAT E85, HYD THUMB, 1575 HOURS ..........................................$84,500

#83217, 2015 KOMATSU PC228USLC-10, 2850 HOURS ........................................$159,500

#2021001DM, 2015 KOMATSU D39PX-23, 2400 HOURS............................................$85,000

#92881, 2013 KOMATSU PC390LC-10, 7900 HOURS ........................................$119,500

#92729, 2012 KOMATSU WA380-7, JRB QC. 4000 HOURS..........................................$127,000

#83398, 2014 KOMATSU PC210LC-10, QC, 4200 HOURS ..................................................$104,500

#82380, 2009 KOMATSU PC220 LONG FRONT, 5,950 HOURS ........................................$129,500

#92930, 2011 KOMATSU D51PX-22, 6 WAY BLADE, 3200 HOURS ..........................$127,500

#52030, 2016 KOMATSU PC490LC-11, AUX HYD, #92926, 2013 KOMATSU PC490LC-10, 8750 JRB QC, 5700 HOURS ..........................$192,000 HOURS, AUX HYD, QC ..........................$109,000

#93009, 2015 KOMATSU PC240LC-10, 7,750 HOURS, QC ............................................$79,500

#80768, PC300LC-7 LONG FRONT, 7400 HOURS ................................................................$99,000

#92180, 2012 KOMATSU D65EX-17, RIPPER, SIGMA BLADE, 4700 HOURS ................$149,500

#92983, 2013 KOMATSU D65WX-16, CAB/AC, RIPPER, SIGMA, 6700 HOURS ..............$94,500

#93089,2020 TAKEUCHI TB290, AUX HYD, HYD THUMB, 455 HOURS ............................$104,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 3

"In Business for over 33 Years" www.hendrixmachineryllc.com Se Habla Español

2007 Broderson IC80-2G, Stk#: 12945, 18,000 lbs., 46 ft., 1,147 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

2015 Dynapac CA1500, Stk#: 12526, EROPS, A/C & Heat, AM/FM Radio, 66" Smooth Drum, 267 hrs., 14.9x24R3 Tires, 4 Cyl. Deutz ..$69,500

2018 Cat D6N LGP, Stk#: 12876, EROPS, A/C & Heat, Radio, Sweeps, Rear Screens, 6 Way Blade, 3,647 hrs, 33" Pads, 13'4" Wide ............$179,500

2015 Bomag BW211D-50, Stk#: 12686, 84" Pad 2016 Cat CS54B, Stk#: 12900, OROPS, 84" Pad 2015 Cat 12M3, Stk#: 12898, EROPS, A/C & Drum, 2,026 hrs., 23.1x26R3 Tires, 4 Cyl. Deutz Drum, 2,428 hrs., S70x75x26R3 Tires, 4 Cyl. Cat Heat, Radio, 6,678 hrs., Front, Hyd., 14 ft. M/B, 2015 Freight Liner MZ, Stk#: 12874, 2,000 Gallons, 13,605 Miles, 11Rx22.5 Tires ..$52,500 Eng ........................................................$66,500 Eng.........................................................$89,500 Ripper, 17.5x25 Tires, 90% Tires ........$149,500

2018 Cat 259D3, Stk#: 12950, OROPS, 2,241 hrs., 6' 2" Bucket, 12" Tracks ................$42,500

2019 Case 580N, Stk#: 12627, OROPS, 4WD, 865 hrs., 4&1 Front Bucket, Ext-hoe ......$78,500

2009 Broderson IC80-2H, Stk#: 12456, 18,000 lbs., 46 ft., 1,352 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2017 John Deere 750K LGP, Stk#: 12928, 2015 Volvo SD115, Stk#: 12906, OROPS, 84" EROPS, A/C & Heat, Radio, 6 Way Blade, 80% Vidratory Smooth Drum, 2,489 hrs., 90% Tires, U/C, 4,074 hrs., 34" Pads, 12 ft. Wide $142,500 28.1x26Rx3 Tires, 6 Cyl. Volvo Eng ......$59,500

2015 Bomag BW211D-50, Stk#: 12486, 84" Smooth Drum, 2,230 hrs., TR-387 Tires, 4 Cyl. Deutz Eng...............................................$59,500

2012 Cat CT660S, Stk#: 12785, 2,980 hrs., 2006 Genie GTH842, Stk#: 12986, 8,000 lbs., 2014 Skytrak 6042, Stk#: 12995, 6,000 lbs., 42 6x4WD, 4,000 gal. w/Front & Rear Spray Bars, 42’, 5,231 hrs, 72" Frame, 72" Forks, 13.00x24TG ft., 2,582 hrs., 48" Frame, 96" Forks, 370x75x28 2014 Cat 740B, Stk#: 12968, EROPS, A/C, VIN: 1HSJGTKR6CJ062961 ..................$89,500 Foam Filled Tires, JD 4.5 Eng. ..............$42,500 Foam Filled Tires, Cummins QSB3.3 Eng $49,500 10,777 hrs., 29.5Rx25 Tires ..................$169,500

2016 Rome Disc, Stk#: 11856, 12' 32" Disc Tractor Attachment ................................$15,500

2013 Toyota 7FDV35, Stk#: 12809, 7,000 lbs., 4,026 hrs., 48" Forks 48" Frame, 250-15/7.00 2020 Trojan 35CL, Stk#: 12346, New Hydraulic Hammer, Fits Cat 305, 305.5, 304, Case / Kobelco Front Tires, 7.00x12/5.00 Rear Tires, 6 Cyl. 2017 Cat 259D, Stk#: 12948, OROPS, 1,853 hrs., 72" Bucket, 12" Tracks ..................$42,500 35, Jdeere / Hitachi 35, Sany SY35 ..........$3,850 Diesel Toyota Eng. ................................$12,500

2011 Marooka MST1500VD, Stk#: 12974, EROPS, A/C & Heat, Radio, 4,377 hrs., 28" Rubber Tracks, 225 hp., Cat C6.6 Eng., wt. 20,282 lbs. ............................................$59,500

2018 Cat 259D3, Stk#: 12951, OROPS, 2,075 hrs., 74" Bucket, 14" Tracks ..................$42,500

2018 John Deere 850K WT, Stk#: 12931, EROPS, A/C & Heat, Radio, S/U Blade, 3,463 2003 Rome Disc, Stk#: 12157, 36" Disc ............ 2000 Cat 924F, Stk#: 12113, OROPS, 6,423 hrs., 3 Shank Ripper, 30" Pads, 85% U/C, 10 ft. ..............................................................$14,500 hrs., 94" Bucket, 17.5x25 Tires..............$29,500 Wide ....................................................$198,500

2020 Cat 259D3, Stk#: 13002, EROPS, A/C & Heat, Radio, 322 hrs., 68" Bucket, 12" Rubber Tracks, Two Spd., Quick Attach/Detach..$65,000

2015 Volvo SD115, Stk#: 12906, OROPS, 84" Vidratory Smooth Drum, 2,489 hrs., 90% Tires, 28.1x26Rx3 Tires, 6 Cyl. Volvo Eng ......$59,500

2015 Dynapac CA1500, Stk#: 12526, EROPS, 2018 Cat D6N LGP, Stk#: 12876, EROPS, A/C & A/C & Heat, AM/FM Radio, 66" Smooth Drum, Heat, Radio, Sweeps, Rear Screens, 6 Way Blade, 2013 Laymor 8HC, Stk#: 12935, OROPS, 820 267 hrs., 14.9x24R3 Tires, 4 Cyl. Deutz ..$69,500 3,647 hrs, 33" Pads, 13'4" Wide ............$179,500 hrs., 6' 3" Broom, 3,000 lbs...................$16,500

2018 Cat 259D, Stk#: 12947, OROPS, 1,980 hrs., 74" Bucket, 14" Tracks ..................$42,500

2012 Genie S40, Stk#: 12106, 500 lbs., 40 ft., 3,307 hrs., 12x15.5 Foam-Filled Tires, 3 Cyl. Deutz Eng ..............................................$26,500

2010 Cat 120M, Stk#: 12838, EROPS, A/C & Heat, Radio, 8,378 hrs., 14 ft. M/B, Front Implement Attachment ........................$109,500

2009 Broderson IC80-2H, Stk#: 12449, 18,000 lbs., 46 ft., 1,066 hrs., 10 ft. JIB, 4WD, 4WS, 69 hp., 10.00Rx15 Tires ............................$21,500

2012 Broce KR350, Stk#: 12921, EROPS, A/C & 2016 Cat CS54B, Stk#: 12900, OROPS, 84" Pad Heat, 1,039 hrs., 8 ft. Broom, Water System, Front Blade, LT225x75Rx16 Tires @ 90%, 4 Cyl. Drum, 2,428 hrs., S70x75x26R3 Tires, 4 Cyl. Cat Kubota Eng. ..........................................$26,500 Eng. ..........................................................$89,500

Page 4 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

WESTERN EDITION Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

HAWTHORNE CAT CONDUCTS FOOD DRIVE FOR GOOD CAUSE

Hawthorne Cat is supporting more than 200 food banks and home-delivered meal service to seniors and individuals with disabilities to help meet the sharp rise in hunger across communities throughout the country.

BOOSTING RENEWABLE ENERGY ‘TOP PRIORITY’ IN WESTERN U.S.

IEDA AWARDS SCHOLARSHIPS TO THREE DIESEL TECH STUDENTS

U.S. officials announced approval of two large-scale solar projects in California and moved to open up public lands in other Western states to potential solar power development.

The Independent Equipment Dealers Association’s (IEDA) 2021 President James Rinehart and IEDA Executive Director David Gordon presented $5,000 scholarships to three students Dec. 15, at Western Technical College.

CASE DONATES CTL TO ZAC BROWN’S CAMP SOUTHERN GROUND

WESTERN STAR ADDS TO PURPOSEBUILT LINEUP WITH NEW 47X

Case Construction Equipment donated a TV450B compact track loader and attachments to Camp Southern Ground in Fayetteville, Ga., founded by Grammy Award-winning artist Zac Brown.

Western Star introduced the newest addition to its purpose-built vocational lineup, the all-new Western Star 47X. The truck complements the Western Star 49X to establish the Western Star X-Series and extend the platform’s reach.

COLORADO’S AIR FORCE CHAPEL TO UNDERGO $150M RESTORATION

KENWORTH C500 NOW AVAILABLE WITH BENDIX ESP SYSTEM

The more than $150 million renovation of the Cadet Chapel at the U.S. Air Force Academy in Colorado Springs is going to take months — or perhaps more than a year longer than originally expected.

Kenworth announced the Bendix ESP Electronic Stability Program is now available as an option for the Kenworth C500, the company’s largest workhorse truck with a GCWR up to 500,000 pounds.

CIM DONATES TO WORLD OF CONCRETE AUCTION

NTEA URGES EXCISE TAX REPEAL ON HEAVY TRUCKS, TRAILERS

The Concrete Industry Management program announced the signature item for its auction at World of Concrete is a truck-mounted 38M concrete pump donated by Alliance Concrete Pumps, NORCAL Kenworth and Kenworth Truck Co.

NTEA commends U.S. Senators Todd Young (R-IN) and Ben Cardin (D-MD) for introducing S. 2435, the Modern, Clean and Safe Trucks Act of 2021. This bill would repeal the 12 percent federal excise tax on heavy trucks and trailers.

HUSQVARNA PLANS BLASTRAC, DIAMATIC SURFACE INTEGRATION

RITCHIE BROS. REPORTS LOADER BACKHOE PRICES UP 15 PERCENT

Husqvarna Construction announced plans to further consolidate brands in the surface preparation segment. Over the coming years, Blastrac and Diamatic products, services and solutions will be rebranded as Husqvarna.

Ritchie Bros.’ December Market Trends Report continues to show positive pricing trends across all its equipment indexes, with truck tractor prices up 55 percent in the United States.

KUBOTA TRACTOR PROMOTES HANADA TO PRESIDENT

Kubota Tractor Corporation announced the appointment of Shingo Hanada as the new president and CEO of Kubota Tractor Corporation (KTC) and Kubota North America (KNA), based in Grapevine, Texas, effective Jan. 1, 2022. Founder, Publisher & CEO Western Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Dennis Hogeboom Teddy McKeon Craig Mongeau Robby Chakler Katherine Petrik Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

RUBBLE MASTER RAMPS UP ITS NORTH AMERICAN STRATEGY

METSO OUTOTEC DEBUTS ITS IN-PIT CRUSH, CONVEY SOLUTIONS SERVICE

SANDVIK MOBILE CRUSHING, SCREENING CELEBRATES MILESTONE

DEPARTMENTS 42 44

COMING AUCTIONS BUSINESS CALENDAR

EQUIPMENT 31 32 34

CATERPILLAR H190 S, H215 S Hammers KOMATSU

JMHB-V Hydraulic Breaker Series

TIGERCAT

E-Series Feller Bunchers, Harvesters

Dennis Hogeboom

Kent Hogeboom

Patrick Kiel

Sharon Swanson

• Colorado • Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Idaho • Montana • Oregon • Washington • Wyoming

• Arizona • California • Nevada • Utah

952/353-1770 Cell 612/481-8557 e-mail pkiel@cegltd.com

Cell 760-518-4336 e-mail sswanson@cegltd.com

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

Junttan Oy is helping to ensure a sustainable future with the unveiling of the PMx2e, the world’s first fully battery-powered electric pile driving rig. The rig’s hydraulic system is controlled by a modern electric motor.

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

JUNTTAN UNVEILS WORLD’S FIRST ELECTRIC PILE DRIVING RIG

AGGREGATE PRODUCTION & RECYCLING SECTION

YouTube

602/679-8759 dennishogeboom@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 5

563-8 872-4 41112

Bellevue (Dubuque), Iowa sales@jjjscheckel.com

2015 CA AT D11T - $1,28 , 85,000

2002 CA AT D11R - $$185,000

2017 CA AT D10T22 - $1,460,000

2005 CA AT D10T D - $388,000

Zero Hour Powertrain i Componen p ts w// 4 yyearr,, 6,000 6 00 hr 7PZ High g Horse series, RRuns andd oper p ates to spec p , 1,800 Hours, 525 at idle, idl 4 Year warrantyy remaining, RJG S#, 1 Owner since new n w,, Low L to midlif idliffee componen p t Bl d SS ipperr,, Good UC. factoryy Cat warrantyy. U Blade, S Rippe U-blade ipp r.. A//C /C, HHeat. Could U blade,, Multi-shank ripp pppperr,, CAT AT Minestar GPS, GPS hours, SS ripper pp r,, U blaade, Tw Twin tilt, Well maintained, i i d bl d w// twin tilt, SSS ripper ld use Excellent hhistory,y, straight b Jan. 2022. paint, otherwise very straight i machine, Like new! Clean, straight, i & clean. Availa ilable i h tracttor from good home. Documentedd history, hi y, Reputa R ation i h and repputable machine. Priced to sell.

RENT OR

BUY!

2019 CA AT D6 LGP - $358,000

Next Gen. A02947. 2,824 Hours, Warrrantyy until 10/2023 or 6,000 hours. GPS readyy, ARO ggrade assist, l ass they come. MS Ripperr,, Documented history. CClean

2019 CA AT D6T LGP VP PA AT - $288,000

2015 Deeere 1050K - $328,000

4,650 hours, SUU Blade, Multi M l i Shank Sh k Ripper pp r,, Top Topcon GX60 Full Auto GPS syst y em comes withh machine. hi Straight, cleann & original i i Midwest dirt machine.

RENT OR

BUY!

2016 CA AT D6T LGP - $$288,000

A02962. 3,960 Total hours. 2 Ye Yearr,, 2,000 hour h warranty A02981. 2,161 Totall hhours, 695 at Idle, dl 1,466 actual remainingg until 9/2023. ARP Accugr g ade GPS readyy,y, operatingg hours, Full 2 year factory f y warrantyy remains, history. Straight S i h bl blade, R winch, history since Goodd U/C, U/C Clean Cl and original with ddocumented hi d Rear i SService hi i new.

2014 CA AT D66T LGP - $198,000

A03003. 6,475 Tota T l hhours, 2,185 2 8 HHours at idle. idl 3,690 Actual oper p atinngg hours. VPAT AT, Allied winch. GPS ready dy,, GGoodd UC UUC. DDocumented history.

2013 CA AT D6T XW - $288,000 ,

A02952. 2,7200 Hours, 744 Idle dl hhours, Only ly 1,976 actual oper p atingg hours. GPS readyy,, Allied W6G Winch, Wi bl d documented history. VPPAAT 66-waay blade,

RENT OR

BUY!

2019 CA AT 374FL - $6188,000

2018 CA AT 320 Next Geen - $159,000 , 2018 CA AT 320 Nexxt Gen - $159,000 ,

2014 CA AT MH3059 M - $348,000 ,

3,663 Hours, 2 Ye Years off factory f y warranttyy remaining. A02946. 2,623 totall hhours, 1,462 of of those h hhours at idle, idl A02915. 2,450 Total hours, 1,593 1 Idle hours. h 2D GGrade d 8,250 Hours, Material handlerr,, as nice as they h y come. Reputa p tion 1 owner machine. 2D Grade Control, 9’6””Stick, Aux Hyydraulic Pkgg in stock. control, Deluxe pack p age g , Facctoryy warranty remaining e . Ground access and hiigh g rise hydraulic li cabb, 325 HPP,, hi Gradee control.l 9’66””Stick, f grapple. 130,000 lbs. 11’10” 0””Stick. ” S i k 4 Ya Yard 60””bucket. Super cleean machine! This machine won’t dissapoint, savve big $$ from new! 24”” Bucket k , 9’6” ” S Auxiliary A ili hydraulics. li 35’ Boom, 29’’ Stick, S i k Setup for

(2)2016 ) Volvo A40G’s - $268,000 , EA. 55,400 400 HHour truccks, Half idle time, Mat M ching hi gr g oupp. Tailga g tes, 1 Ow wnerr,, Excellent condition. Very V y ggoodd B R di tires. Ready Radial R to go. Rent/Lease or Buy.

RENT OR

BUY!

(2)2015 ) Volvo V olvo A25G’s - $2448 48,000 ,000 EA EA. ((2)2014 ) CA AT 730C’s - $$358,000 AT $358 000 EA. EA 33,060 060 HHours, 1,866 Idle hours, Tailgate l es, Mat M ching h Radial tires, Original g ppaint, Documentted history,y, Volvo dealer l iinspected, Very cleean.

Ejec Ej j tor bodies, b di 835 8 & 1,418 Hourrs. 1 Ownerr.. Radial Rd l i Original tires. g pain p t. All maintenaance history.y Super p clean, original, h trucks. Reent/Lease or Buy. i l low l hour B

B POWERTRAIN PLUS REBUILDS

ADES R HOLMES SMOOTH DRUM ROLLERBL

2016 CA AT 980M M - $268,000 $268,000

7,650 Hours, 2,671 in neuutral,l Only ly 4,979 , actual b k Ride workingg hours. Radials, 7.5 Ya Yard GP bucket, R control,l Auto A grease, Dealer maintained, History.

2019 Volvo Volvo LL260H - $288,000 $288,000

7,320 Hours, 2,333 Id Idle d hours, dl h 9.5 Ya Yard GP bucket, b k Ride control, 875 Raddial tires, Dealer maintained, Documentedd history, Super clean.

2018 V Voolvo L180H - $238,000 $238 000

A02916. 6,2500 Hours, H 6.5 Ya Yardd GP bucket b k , 330 HPP,, 62,000 lbs, Auxiillaryy hydaulic controls, Volvo dealer inspected. Clean andd straight, original machine.

RENT OR

BUY!

NEW! Ready to ship!

2014 K-TTEC 1233 - $148,000 , 2007 CA ATT 826H H - $288,000 $ , Holmes 11F - $25,50 , 0 / 16F - $31,500 $ 2011 CA ATT 1400M VHP - $2 $248,000 , 36 Ya Yardd capacit p y ppullll scraper p r,, veryy nice & clean. l CComes 9,800 Hours on Complet pl e Dealer l Rebuild R b ld. Goodd used Verified 735 total hours, 451 Idl dle hhours, Only ly 284 2 Models, 11’or ’ 16’’ cuttingg width. Made in Iowa. 2006 CA ATT D10T Rebuild Inn Process Constr with i h jo j yystick l harness h & hit V l A40. A40 i k conntrols, hi chh ffoor Volvo i tennance & servici e hist compac p tor w// ffullll main hi ory. i idd actuall workking hours h . From state DOTT,, Store S inside. uction gr g ade d , extreme dduty. For haul h l roadd & site - $885,000. Zero hour Powertrain Plus, E i Estimated d 1,,400 hours use. Rear push block. EExcellen e , Cllean cabb, Testedd to OEM specs. ll t feet 14’ Moldboard ldb d, Mid Mid-m d mount Scarafier fi V Ripperr.. Tier 3. lleveling l , compacting & sealing l dir ddi t prior to rain event. OEM CAT AT Warranty. New undercarraigge g , U Blade, M ch/2021 SS Ripperr,, Pre-emissions! Available Mar

visit

c eckel.com JJSch

and watch w our new company viddeo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide. We are easy to work with & will not be beaat on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663-872-4112 63 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us ffoorr daily updates:

Page 6 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

West Abilene Equipment Center abileneequipmentcenter.com Abilene, TX 325-603-1328 Alpine Equipment Repair

Jet City Equip jetcityequipment.com Oak Harbor, WA 360-675-4441 Marysville, WA 360-651-9079 Wenatchee, WA 509-888-8181

*Compact Excavators Only

alpineequipmentrepair.com American Fork, UT 801-874-6061 Cascade Trader, Inc. cascadetrader.net Chehalis, WA 360-748-1182 Cisco Equip cisco-equipment.com Artesia, NM 575-748-1314 Odessa, TX 432-550-9181 Lubbock, TX 806-745-9595 San Angelo, TX 325-653-2121 CSTK cstkequipment.com Kansas City, KS 888-225-2785 Earhart Equip Corp. earhartequipment.com Tucson, AZ 520-889-6396 Four Seasons Equip, Inc. fourseasons-equip.com Houston, TX 800-234-5007 Dallas TX 866-270-1700

hceamericas.com

Mecom Equipment mecomequipment.com Stockton, CA 209-466-5135 Motor City Rentals & Sales motorcityrents.com Phoenix, AZ 602-539-2911 Nueces Power Equip nuecespower.com Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Antonio, TX 210-310-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066 El Paso, TX 915-541-0066 Oregon Tractor oregontractor.com Roseburg, OR 541-679-6211 Portland, OR 503-282-7211 Porter Group Usa portergroupusa.com Corona, CA 951-674-9999 Lakeside, CA 619-390-1197 Pacoima, CA 818-834-0102 Newark, CA 510-713-7368 W Sacramento, CA 916-372-5925 Wildomar, CA 951-678-9902

R&S Industries Inc. rsindinc.com Clovis, NM 575-769-8659 Springdale Tractor Tulsa, OK 918-224-1565 Tri-State Equipment *Compact Excavators Only

tristateequipmentrentals.com Lake Havasu, AZ 928-680-6748 Fort Mohave, AZ 928-704-0101

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 7

THE HARDEST WORKING WARRANTY ON THE JOBSITE.

5 YR 3 YR

With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.

STRUCTURAL

STANDARD

*Limited lifetime warranty on the center pin.

hceamericas.com

Page 8 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hawthorne Cat Conducts Food Drive for Good Cause Hawthorne Cat is supporting more than 200 food banks and home-delivered meal service to seniors and individuals with disabilities to help meet the sharp rise in hunger across communities throughout the country. Hawthorne, through its partnership with Aloha United Way, is donating $50,000, with two of the beneficiaries being Hawaii Food Bank and Hawaii Meals on Wheels for Kupuna to meet the sharp rise in food insecurity.

Launching this fund with Aloha United Way is part of a continuing community benefit effort for Hawthorne Cat. “This time of year should be a time of joy, and the more families, the elderly and those with disabilities we can help put food on the table, the stronger our communities will be,” said Bobby Whitworth, general manager of the Pacific Region of Hawthorne Cat. “We chose to partner with Aloha United Way because we could easily direct resources to their

This is part of a bigger continuing initiative at Hawthorne that it is calling “Hawthorne Kahiau.” It named the company’s ongoing giving initiative Kahiau, because the meaning resonates with its mission, which is “we help our customers build better communities.”

partner agencies who are already serving communities with a statewide presence. The agencies already communicate well between islands, and they can funnel food, information or funds where they will make the most impact.” This is part of a bigger continuing initiative at Hawthorne that it is calling “Hawthorne Kahiau.” It named the company’s ongoing giving initiative Kahiau, because the meaning resonates with its mission, which is, “we help our customers build better communities.” In Hawaiian, Kahiau means to give generously or lavishly with the heart and without expectation of return. Hawthorne Cat hopes its Kahiau initiative will inspire additional funding partners to join the effort and contribute. For more information, visit https://www.hawthornecat.com/kahiau-giving-to-hawaiis-communities/

About Hawthorne Cat Hawthorne Cat is the authorized dealer for Cat construction and power equipment in San Diego, Hawaii, Guam, Saipan and American Samoa. Hawthorne sells, rents, provides parts and service, training and emission solutions to various industries including general building construction, landscaping, marine, paving and power generation. For more information, visit Launching this fund with Aloha United Way is part of a continuing community benefit effort for Hawthorne Cat. https://www.hawthornecat.com/. 

Boosting Renewable Energy ‘Top Priority’ in Western U.S. BILLINGS, Mont. (AP) U.S. officials announced approval of two large-scale solar projects in California and moved to open up public lands in other Western states to potential solar power development, as part of President Biden administration’s effort to counter climate change by shifting from fossil fuels. The Interior Department approved the Arica and Victory Pass solar projects on federal land in Riverside County, east of Los Angeles. Combined they would generate up to 465 megawatts of electricity, or enough to power about 132,000 homes, according to San Francisco-based developer Clearway Energy. The Interior Department also issued a call to nominate land for development within “solar energy zones” in Colorado, Nevada and New Mexico that combined cover approximately 140 sq. mi. The Bureau of Land Management oversees nearly a quarter-billion acres of land, primarily in Western states. Agency Director Tracy Stone-Manning said boosting renewable energy is now one of its top priorities. Forty large-scale solar proposals in the West are under consideration, she said. In December 2021, the agency issued a draft plan to reduce rents and other fees paid

by companies authorized to build wind and rising to 30 percent, said Xiaojing Sun, head owns and manages more than 80 percent of solar projects on public lands. Officials were solar researcher of industry consulting firm the state’s land, large-scale solar projects unable to provide an estimate of how much Wood Mackenzie. have faced opposition from environmentalmoney that could save developers. Incentives for residential-scale solar ists concerned about harm to plants and aniThe invitation to developers comes as would go away completely by 2024, she mals in the sun and windswept deserts. officials under President Biden promote said. Earlier in 2021, developers abandoned renewable wind and solar power on public “It will significantly slow down the plans for what would have been the counlands and offshore to reduce greenhouse gas growth of solar,” Sun said. try’s largest solar panel installation north of emissions that are warming the planet. However, she added that streamlining Las Vegas amid concerns from local resiBiden suffered a huge blow to his climate access to federal land could help the indus- dents. Environmentalists are fighting anothagenda recently, as opposition from West try, as large solar farms on non-federal lands er solar project near the Nevada-California Virginia Democrat Sen. Joe Manchin tanked face growing local opposition and cumber- border that they claim could harm birds and the administration’s centerpiece climate and some zoning laws. desert tortoises. social services legislation. The administraIn Nevada, where the federal government Stone-Manning said solar projects on tion also has been forced to public lands are being sited to resume oil and natural gas take environmental concerns lease sales in the Gulf of into account. Mexico and numerous western The solar development states, after a federal judge zones were first proposed sided with Republican-led under the Obama administrastates that sued when Biden tion, which in 2012 adopted suspended the sales. plans to bring utility-scale “We are rebuilding that solar energy projects to public capacity,” Interior Secretary lands in Arizona, California, Deb Haaland said. Colorado, Nevada, New But without the climate bill, Mexico and Utah. Officials tax incentives to build large- Forty large-scale solar proposals in the West are under consider- have identified almost 1,400 scale solar will drop to 10 per- ation. The Interior Department already has approved the Arica square miles of public land cent of a developer’s total cap- and Victory Pass solar projects on federal land in Riverside for potential leasing for solar ital costs by 2024, instead of County, east of Los Angeles. power. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 9

Page 10 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case Donates CTL to Zac Brown’s Camp Southern Ground Case Construction Equipment donated a TV450B compact track loader (CTL) and numerous attachments to Camp Southern Ground, a multi-missioned nonprofit organization in Fayetteville, Ga., founded by Grammy Awardwinning artist Zac Brown of Zac Brown Band. For the majority of the year, Camp Southern Ground is committed to supporting veteran mental health and wellbeing with two programs that help veterans find community, direction, purpose and healing during — and even long after — their transition back to civilian life. During summer months, Camp Southern Ground is a residential summer camp serving kids from varied backgrounds and abilities. Camp Southern Ground’s inclusive model brings together typically developing children, children with neurodevelopmental differences, children from underserved areas and children from military and veteran families with programs that challenge, educate and

The loader will be used in development and maintenance projects to expand facilities and capabilities at the camp.

inspire. Representatives from Case have previously participated in meetings with veterans at the camp on networking skills and careers in construction. Scott Wine, CEO, CNH Industrial, and Terry Dolan, Case Construction Equipment vice president of North America, delivered the CTL to Zac Brown at the camp on Dec. 2, 2021. The loader will be used in development and maintenance projects

Scott Wine, CEO, CNH Industrial, and Terry Dolan, Case Construction Equipment vice president of North America, delivered the CTL to Zac Brown at the camp on Dec. 2, 2021.

to expand facilities and capabilities at the camp. “Really good things happen at this camp — healing, growth and education — giving veterans the skills to transition to the next stage of their careers, and giving kids the confidence and social skills to excel in their personal relationships,” said Dolan. “At Case, we talk a lot about building communities — and the strongest communities are built on the kind of strength

and character that Camp Southern Ground provides. We’re honored to be partners in this mission together.” “The good we do here is built on the foundation of the work we do with our veterans and our campers, as well as the support of great partners like the team at Case,” said Mike Dobbs, CEO, Camp Southern Ground. “This donation allows us to perform countless site development and

maintenance projects that we’d otherwise have to contract out — saving us considerable time and resources. We can’t thank Case enough for this great new resource.” For more information about Camp Southern Ground, visit CampSouthernGround.org. For more information about CASE and its work in the community, visit CaseCE.com/BuildingCommuniti es. 

Colorado’s Air Force Chapel to Undergo $150M Restoration COLORADO SPRINGS, Colo. (AP) The Air Force Academy chapel is one of the most distinctive pieces of architecture in Colorado. But few people have caught a glimpse of it for more than a year. That's because the entire building is undergoing an exhaustive restoration inside a 14-story “cocoon.” And it's not likely to emerge any time soon. The more than $150 million renovation of the Cadet Chapel at the U.S. Air Force Academy in Colorado Springs is going to take months — or perhaps more than a year longer than originally expected — as contractors are contending with more asbestos than they expected, as well as other unforeseen challenges. “We knew that there was significant

asbestos in this building,” said Duane Boyle, campus architect of the academy. “We just couldn't get in all the places where asbestos would be to test.” The project began two years ago and has required the construction of a vast white temporary enclosure around the 150-ft.-tall iconic aluminum building. This “cocoon,” as Boyle calls it, enables crews to painstakingly correct the legacy of one frugal design choice from the building's initial construction in the 1950s and early 1960s. The chapel’s architect, Walter Netsch Jr., originally conceived of an elaborate gutter system to drain off rainwater falling onto the chapel. But Boyle said that idea was abandoned in favor of caulking all the seals on the building’s network of interlocking exterior aluminum panels to cut costs.

“We had 32 miles of caulking on this building, which is kind of ridiculous when you start thinking about that,” Boyle said. The caulking did not stand up to the elements of the Pikes Peak region and the chapel has suffered leaks from the time it opened. Extensive water damage over the past six decades led to the restoration, which involves removing every aluminum panel and more than 20-thousand brick-sized stained glass blocks. What is under the temporary building now is just a massive steel skeleton covered in rust-colored primer. Inside, the building is nearly unrecognizable. Fourteen levels of scaffolding fill the main Protestant Chapel. Many of the items that used to be inside, from the pews to the facility’s two massive church organs, also are being fully restored

either due to water damage or disrepair. Boyle said dealing with the additional asbestos contamination found in the chapel will push the project past its original 2023 completion date, though he is not prepared to estimate how much longer it might take. But the plan remains the same: eventually every pew, organ pipe, aluminum panel and stained glass brick will be refinished or meticulously recreated and put back exactly where it was before, with one important addition. Crews are finally installing Netsch’s original drainage system to replace the ineffective miles of caulking. Gazing at all the work around him, Boyle recently offered an assessment of the undertaking he is in charge of. “I think it would compete as one of the most complicated and intensive historic preservation projects of all time,” he said. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 11

Committed to bringing our customers the best in sales, parts and service. “ ASAP has a rock-solid reputation of providing excellent service, support and satisfaction, and will be a great resource for compact excavator customers in the greater College Station area.” - Matt Brown, District Manager Hyundai Construction Equipment Americas

COMPACT EQUIPMENT HYUNDAI DEALER

For more information,

979-690-1106 730 Peach Creek Cutoff College Station, TX 77845 ASAPequip.com

Hyundai Construction Equipment Americas announces the expansion of its North American authorized dealer network with the addition of ASAP equipment. ASAP has been dedicated to its customers in the compact construction and turf industries since it opened its doors. With the addition of this new dealership, Hyundai’s North American network now includes more than 80 dealerships operating in just over 180 locations, offering sales, service, and parts for Hyundai excavators, wheel loaders, compaction rollers and other construction equipment.

www.hceamericas.com

Page 12 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contractors Overcome Many Surprises On Bakersfield Job BELLE from page 1

potential to inundate our ability to deliver a quality project safely and efficiently,” said Bobby Pentorali, civil engineering manager of NV5, construction manager of the city of Bakersfield. “Our honest working relationships allowed us to manage what seemed at times like an overwhelming endeavor. Granite’s team consistently demonstrated an honest and positive culture from the beginning to close-out. The project was a huge success, and we are all proud of what we delivered for our client and the community.” During the course of the project workers removed the reinforced concrete and steel of the original Belle Terrace Bridge in just two nights. The equipment used impacts equivalent to 70,000 1-lb. hammers for the demolition. The demolition and removal of the existing bridge was carried out over SR 99. The freeway had to be closed and active traffic detoured for five-hour windows on two consecutive nights. One of the many “surprises” of the project occurred when workers found asbestos conduits in the existing bridge, originally constructed in 1963. The construction team had to surgically remove concrete segments and conduits containing asbestos by cutting through the deck. The construction team leaned heavily upon Caterpillar equipment during the demolition and excavation phases of the project. The team deployed the Cat 320, 336 and 349 excavators, CatD6N with Trimble earthworks and a Cat 140M3 motor grader. The team also used a Link-Belt RTC8080 crane as well as other equipment during the bridge and retaining wall construction sequences. SR 99 was built on an ancient riverbed and routed in a lowered trench through central Bakersfield. The project called for the freeway to be widened approximately 100 ft. and a retaining wall constructed. The soil nail wall, the retaining wall structure, was 3,400 linear ft. in length, and was more than 30 ft. tall. It utilized six, 5-ft. tall vertical lifts of sequenced construction to build from the top down. The soil nail and retaining walls hold dirt, rock and soil in place, preventing them from collapsing onto the freeway. The construction method for the soil nail wall consisted of drilling holes angled downward from horizontal, into a 5-ft. vertically excavated soil face into the soil, then inserting steel rods and grout, tensioning with a large nut and washer into the holes. This essentially formed a “nail” to support the wall. This cost-effective method quickly fell apart like the sandy soil that need to be secured. The loose, sandy soil would not stand vertically long enough for a five- foot layer to be completed. Granite Construction conferred with the owner’s engineer and construction team to determine a fix.

The improvements on SR 58 and SR 99 included the replacement of two bridges.

Workers used approximately 11,000 tons of Type A hot-mix asphalt for road repairs. The team used 4,300 cu. yds. of continuously reinforced concrete pavement for widening SR 99 and nearly 10,000 cu. yds. of structural concrete for the bridges and retaining walls.

The solution began with the workers excavating a 2-ft.-wide trench, more than 30 ft. deep, then placing slurry that when cured would hold back the earthen materials vertically as lifts were constructed. Some 6,000 nails were inserted into the supported soil as the wall was constructed. Each nail was drilled 20-to-30 ft. deep. The nails, when tensioned, restrain the vertical pressure of the soil. This creative fix required nine months to complete the 3,400-ft. wall and was necessary before new freeway construction could begin. “When problems like this surfaced, the team held to a mindset of trying to find the best solutions,” said Bassett. “When we saw problems, we tried to bring them up early and work as a team to get them fixed.” With the soil nail wall complete, the construction team could make provisions for widening SR 99. Unfortunately, other obstacles also hindered construction. A frontage road along the state route presented new problems. “As we started excavation, we discovered oil lines, water lines and other lines that went nowhere,” said Bassett. “There were also storm drain lines that ran to a nearby detention basin. The storm drain lines had to be taken out for the construction and a pumping system and a temporary basin was constructed for the city until construction was completed.” During excavation, the team also discovered other surprises including such things as 30-ft.-long chunks of concrete that were 4-ft. thick. Throughout the project, Granite emphasized steps that were good for the environment. This surprise was no exception. Workers simply fed the concrete chunks to a crusher located onsite that crushed concrete from the demolished bridges and used as aggregate base for the new asphalt and concrete roadways for both SR 58 and 99. More Surprises With most of the big problems out of the way, the workers could focus their energies on the two bridges that were the heart of the project. The connector bridge for the two freeways had to be built in a new location. The three-span bridge required a new height to accommodate modern traffic conditions and a new location to accommodate the interchange. The overhead clearance reached 18 to 19 ft. Granite’s team recognized that this part of the project had fewer overlapping issues and decided to start this portion of the project earlier than required, shaving months off the schedule. Planned relocation of utilities often conflicted with con-

struction. This can be a serious problem when the utility lines are located where bridge abutments are needed. Relocation of storm drains was another challenge. One of the solutions was that the construction team built the bridge abutment but initially left out the wing walls. This enabled the utility lines to be temporarily rerouted with the wing walls installed later when the final lines were laid. Also, AT&T relocated some of its fiber optics overhead to prevent interference with construction. With many of the problem issues out of the way, Granite workers could address paving, the bread and butter of many Granite projects. Prior to the interchange work, SR 58 ended at SR 99, forcing motorists to travel on surface streets to reach I-5, a major connection for north-south traffic for the West Coast. The completed roadwork will enable commuters and truckers a smoother, quicker traffic flow on the new Centennial Corridor and Westside Parkway. These are vital transportation corridors. Workers used some 11,000 tons of Type A hot-mix asphalt for road repairs. The team used 4,300 cu. yds. of continuously reinforced concrete pavement for widening SR 99 and nearly 10,000 cu. yds. of structural concrete for the bridges and retaining walls. Workers used another 760 cu. yds. of concrete for building sidewalks, curbs and gutters. Teams incorporated Six Sigma Continuous Improvement as they assembled a final element of the project — a cast-inplace concrete retaining wall with an architectural finish resembling decorative rock formation. “Each architectural form set was 100 feet long with 19 different sections needing to be installed to complete the face,” said Bassett. “This involved a lot of repetitive motions and we tried to think if there was a better way to do it,” said Bassett. One simple solution was to convert equipment like drills, skill saws, nail guns and caulking guns to battery power. This meant fewer power lines and less chance of workers getting tangled up with each other. Also, the lighter equipment meant workers could install more elements faster. It greatly improved our productivity.” As the job concluded, a new normal emerged in this central California city. “It was gratifying to see the project completed and see the bridge open again,” said Bassett. “The bridges carry lots of local traffic, pedestrians, school children and local business activity. We were able to listen openly about problems and worked with the city to find solutions.” Darryl Ebel, Granite’s area manager, was pleased by the safety record on this complicated project. “We emphasized safety among our team and the different partners. It required two and a half years to complete the job, some 115,000 manhours. We were able to accomplish this with no lost-time injuries or environmental citations.”  CEG

The soil nail wall, a structure consisting of 3,400 linear ft., averaged 30-ft. tall and utilized six, 5-ft.-tall vertical lifts.

Pages 13-19

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Rubble Master Ramps Up Its North American Strategy After nearly 20 years in the North American market, an Austrian manufacturer of material processing equipment appears poised to step it up a notch. With a new managing director for the Americas and a recently opened retail location in Texas, Rubble Master expects to make waves in the North American crushing and screening space. Jackson McAdam, a former CAT Power Systems executive, was recently hired to head up the company’s sales and operations in the United States and Canada. Strategic Planning After a lengthy COVID-19-related delay in Europe, McAdam arrived in the United States in April. Previously he held positions with Caterpillar and Caterpillar dealers in both New Zealand and Ireland. He also served seven years as Power Systems direcJackson McAdam said, “the RM 70GO! and RM 90GO! are 53,000-lb. and 64,000-lb. machines. They are perfect for the contract crushing market.”

tor of the Cat dealer in the Russian Far East. McAdam said Rubble Master’s current strategy in the United States began taking shape in 2019 when the company purchased Maximus Crushing and Screening. The Maximus’ line (now ) includes a larger class of both crushing and screening machines with the resulting combination allowing Rubble Master, a company previously focused on compact machines, to offer a full line of equipment for the first time. “Once we became a full-line supplier, we needed to look at our distribution,” McAdam said. He added that their analysis showed that Rubble Master had developed a fairly strong distribution network on the East Coast of the United States, had made some progress on the West Coast, but had little or no business in mid-America. “Further analysis showed that Texas was

by far the most active market in the U.S. for both crushing and screening,” he said. “From that, we arrived at Texas being the center of our operations for North America.” The new retail facility, located in Ennis — just outside Dallas — will serve customers in Texas on a direct basis. In addition to this, the company will continue to expand its dealer base throughout the rest of the United States and Canada. Whole New Ballgame “Previously we had a very grassroots approach in terms of distribution. Now, as we have evolved into a strong full-line supplier, we are seeing interest grow from major dealers around the country.” Some of those new “major dealers” that have taken on the Rubble Master line include Century Equipment, a Case dealer in the Rocky Mountain region based in Salt Lake City, and James River Equipment, a John Deere dealer with branches in Virginia and West Virginia. McAdam said he expects the network expansion to be at the rate of about two to three dealers per year. “Word is getting out,” he said. “We are now offering the tools that other major suppliers offer, like floor planning and other dealer incentives.” In addition to an overhaul of the distribution network, the company is focusing on the supply side as part of what the company calls its “localization project.” This means that in addition to the current system where parts are available on an overnight basis from the

Jackson McAdam, a former CAT Power Systems executive, was recently hired to head up the company’s sales and operations in the United States and Canada.

company’s parts hub in Memphis, by mid 2022, key parts will be manufactured in the United States. Putting Waste to Work Part of Rubble Master’s mission is education. McAdam said there are many contractors not currently recycling materials and missing the opportunity to make money in doing so. “There is so much recyclable product out there waiting to be processed,” he said. “In many cases, it is a matter of education. We’ve seen that some contractors have enough material in their yard to justify the cost of a machine. Not only can they then process their own product but they can go on to make more money processing materials for others.”  CEG

With a new managing director for the Americas and a recently opened retail location in Texas, Rubble Master expects to make waves in the North American crushing and screening space.

Page 14 • January 2, 2022 • www.constructionequipmentguide.com • Aggregate Production and Recycling Section • Construction Equipment Guide

New Integrated Solutions...

Metso Outotec Debuts Its In-Pit Crush, Convey Solutions Service Mining operations are impacted by declining head grades. More material needs to be moved from greater depths to maintain concentrated production levels. This affects productivity and energy consumption, which directly correlates to the mine’s profitability and sustainability. To better meet these challenges, Metso Outotec launched in-pit crush and convey (IPCC) solutions. The integrated solutions consist of crushing, conveying and stacking equipment combined with IPCC planning and lifecycle services. The offering has been designed to ensure the highest productivity, energy efficiency and maintainability. “With our team, technology and serv- Metso Outotec launched in-pit crush and convey (IPCC) solutions. ices, we can combine and provide the industry’s strongest building blocks to deliver successful in- work packages that are in line with common study phases pit crush and convey operations,” said Leif Berndt, director, used throughout the industry. The team uses an integrated IPCC of Metso Outotec. “We are excited to launch our solu- methodology to determine the optimal pit shape and mine tions that cater in an exceptional way to our customers’ oper- schedule in alignment with system configurations, that utilize advanced engineering tools to increase the speed of projational and sustainability targets.” ect definition and certainty of outcome. The key technology highlight of the IPCC solution is the Metso Outotec’s IPCC Offering The experience-driven IPCC planning services allow Foresight semi-mobile primary gyratory (SMPG) station, Metso Outotec to support customers with pre-defined study which features the Superior MKIII crusher and SmartStation

for optimal processing, allowing material size control and reduced wear, downtime and plant height. The IPCC solutions are part of the company’s Planet Positive portfolio with their improved energy efficiency. Services are a key part and a proven piece of the Metso Outotec IPCC solutions. Life Cycle Services (LCS) for operational support are available. Connected analytics allows equipment to be better managed by staying connected at all times and by reducing unplanned downtime. The IPCC offering also includes offsite and onsite assembly options. Key benefits of Metso Outotec in-pit crushing and conveying technology include: • Optimal processing with patented SmartStation; • Up to 30 percent higher capacity on the same crusher size and 70 percent reduced downtime with Superior MKIII Primary Gyratory technology; • Up to 30 percent power savings with Energy Savings Idlers (ESI); and • Better maintainability through improved crusher access and plant area isolation. For more information, visit mogroup.com/ipcc. 

Construction Equipment Guide • Aggregate Production and Recycling Section • www.constructionequipmentguide.com • January 2, 2022 • Page 15

From Reduction to Shaping Your ability to turn virgin material and waste prroduct into high quality aggregates requires equipment withh unmatche d precision. h d power and From reducing shot rock to sizing and shaping fine sand, we design and manufacture the most versatile and efficient cruushers. Not sure what you need? Let our experts partner with you to applyy the ideal solution.

astecindustries.com

5811 Edith Boulevard NE Albuquerque, NM 87107 505-344-1300 www.thewesterngr g oupsw p .com

12451 Old Highway 95 Boulder Cit y, NV 89006 702-293-7 75 504

280 W W.. Valley Road Rialto, CA 9237 76 6 909-87 74 4-2700

390 N. 2000 West Lindon, UT 84042 801-796-6126

7780 N. Virginia St Reno, NV 77 75 5-971-9124

412 South Jackson Street Amarillo, TX 79101 800-699-1723

12639 W. W. Butler Drive El Mirage, AZ 623-594-5401

102 North Main Street Hereford, TX 79045 806-364-5687

www.goodfellowcorp.com g p

5000 Vasquez Blvd. Denver, CO 80216 303-355-5900

2239 Commercial Blvd. Colorado Springs, CO 80906 719-576-5541

2340 I-70 Fronntage Rd. CO 81505 Grand Junction, C 1550 970-241-1

2600 Center C t Dr D. Milliken, CO 80543 970-587-1188

Cee LLn. Kay C Durango, CO 81301 970-259-0455

7854 Hutchins D. H t hi Dr Cheyenne, WY 82007 307-634-5149

www.powermotivecorp.com p p

4428 East Trent Ave. Spokane, WA WA 99212 800-541-07 75 54

22431 83rd Ave. S. Kent, WA WA 98032 800-669-2425

613 S. 4th Ave Mansfield, TX 76 76063 817-473-2110

#6 West Ind dustrial Circle Odessa, TX 797 76 61 432-333-2887

3871 IH -10 W. Freeway Exit 693 Columbus, TX 78934 979-732-6902

www.texasb bearing.com g

19444 Ivan Street SW 4610 Cloudburst Wa Way Rochester,r, WA WA 98579 Eugene, OR 97 974 402 800-304-4421 800-826-9 9811 1257 We West Amit y Boise, ID 83705 800-221-5211

622 28th Street Lubbock, TX 79404 806-7 74 49-5687

5241 NE 82nd Ave. Portland, OR 97220 800-950-7779

27 73 35C Tucker Ct. Jerome, ID 83338 800-221-5211 www.modernmachineryy.com

101 International Dr D. Missoula, MT 59808 800-332-1617

2666 Garrett Way Pocatello, ID 83201 800-829-4450

3155 Highway 93 S. Kalispell, MT 59901 800-434-4190

7850 S. Frontage Rd. Billings, MT 59101 800-7 73 35-2589

Page 16 • January 2, 2022 • www.constructionequipmentguide.com • Aggregate Production and Recycling Section • Construction Equipment Guide

Construction Equipment Guide • Aggregate Production and Recycling Section • www.constructionequipmentguide.com • January 2, 2022 • Page 17

www.compassequi p q p.com EDCCBA@?>;?B98>7654B32B1B0//.->,,8+B*) ('&%(''%$ %$#CEB1B('&%(''%%CD"&

!!! ?/>4 > 2 45/>8 84 ?. 3323 23 Energy Energy Wa Way />278 ./5+B 940-683-4070

E(E$ E (E E$$B %"& "&B 87 > +B C'&%''$# $#%"""&

!!! 8 >/8%?@5 ?. "$# $#(B B*. 5/ B*, B /B1B 84@+ B) 480-476 76-6004

!!! >? 4., 5>. 44 ?. 800-779-4450 0 EC B 8 845B#"&&B 'ECB . 56B('&&B (&E&B B) ,8 B 5B 56B . 56 8455B > B .>48+ @,5 ,5B @ 8 @ 8B*>5 + *>5 ++B 9 //>?@ 8+ 9 //>?@ 8+B

!!! @?!845 @?6> 8 8/ ?. C#&$B . 56B#"D56B 5 "(( ((&B /-> 7B32 "" # #((B B @ 2 B ,-2

8 5+B ) )

78 8+B03 A./5,@ 2+B03 206--7762-59 5933 (E"%'&# &#%'$D $D# 503-2 -252-5933 '("(B B ,,>-@ B32 @,,8 + +B ) ) . @ 8B @ 509-534-59 5933

www.quinncompan q p ny.com y @ 8/4;8,2+B*) ..56>,,B3@ ?6+B*) * 0 @/2+B*) DD"%' '%(C&& E E %$ %$DC%"$$$ C&(%EC(%# %#"$" +B*) @ ?@458/+ /+B*) *>5 B. B 2 45/ + 3>-8/4>28+B*) 562-46 DD"% E# 633-4000 E#%""$$ ("%DCD%E( ( E(D&B , @/+ /+B*) C"C%$ %$D$%$"$" $"

!!! !@7 8/8 > 8 8 5 ?. "C&&&B >56B32B1B) /./@+B*0B1B30 3 3--7739-3000 /,> 75. + /,> 75. +B*0 *0 9@ 28 +B*0 9@ 28 + *0 @/ > 75. + @/ > 75. +B $" %'ED%$ %$CC&B $& $&%# %#$D $D%'$C $C" (&( &(%'#$% $%(' (''" *.,./@2.B /> 74+B*0 A 8 ,.+B*0 9. 4+B $" %' &%$ %$'"D $(%' '%# %#"EC $" %(EE%EE'' ($( /@ 7.+B*0 @+B*0

,BA@4.+B $& $&%# %#( %#&&" $&%CEC%# %# "" "(%C#"%$ %$D(" /@ 2B ?5>. +B*0 ), 8/ 8+B > 24./+ /+B*0 970-2 70-242-2 42-2834 $& $&%# %#$C $C%"$( $(& &(%'E( E(%CE"" (&(

!!! !845@58 ?. ? 'C& B9! B'"#B1B >,,> 74+ 7 +B B1BC&&% %DD$ D$D

". 0* !.0."+*10/0.-,+/ *11) )(''&%$

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

mogroup.com m

Page 18 • January 2, 2022 • www.constructionequipmentguide.com • Aggregate Production and Recycling Section • Construction Equipment Guide

SAVVE MMONEY ANND TIME CRUSHER BUCKET The crusher buckets for skid steers and backhoe loaders. When installed on your machine, the unit crushes any type of inert material.

REDUCE >> REUSE >> RECYCLE See the whole product range on: MBCRUSHER.COM info@mbcrusher.com

WORLD OF CONCRETEE Silv Sil er Lott Booth S29967

Sandvik Mobile Crushing, Screening Celebrates Milestone Purpose designed to help customers get the very best out of their investment, Sandvik Mobile Crushing and Screening is now offering its premium data subscription on new equipment and retrofit packages complimentary for seven years. This marks the celebration of the 1,000th mobile unit to leave the factory with My Fleet connected. Digitalization has never been more important than it is in today’s climate and it has positively changed the way of working for many people over recent months. Sandvik Mobile crushing and screening have invested heavily into its online distributor portal and My Fleet telematics systems

Marty Waldorf (L), sales representative, and Dan Soley, executive VP sales and marketing, at MillerBradford & Risberg Inc.

over the past two years. Every new machine within the Qand U-440i range of mobile crushers and screens is equipped with a My Fleet telematics device and fully connected the moment it leaves the factory. “It’s an exciting time to hit this major milestone of 1,000 units now connected to My Fleet,” said Jesper Persson, vice president life cycle services. “We are proud of the progress we have made in digitalization and automation, and how the technology supports our customers. This investment will enable them to learn more about their operation and how best to improve it by tracking their fleet and the health of it. Alerts and notifications will proactively help to resolve issues before they become critical, while also enabling remote support wherever possible, saving on time, cost and thereby generating the desired uptime in a sustainable way.” U.S. Distributor Miller-Bradford Take Delivery The unit delivered is a Sandvik QI442 impact crusher and the customer to take ownership in February is the U.S. Distributor in Wisconsin, Miller-Bradford & Risberg Inc. Dan Soley, executive VP sales and marketing said, “We are delighted to hear the news that our QI442 is the 1,000th unit. My Fleet is a really beneficial tool as it gives great insight into machine utilization and location. The ability to offer remote support means we don’t always need to visit the customer to assist them in their operations.” Customers will be able to benefit from enhanced levels of technical support. Whether through Sandvik, or from trained distributor network, technical support specialists will be able

to view the same operational data and view notifications of any alerts or machine faults via the system, and thereby be able to offer remote support without necessarily needing to be on site. This immediate assistance increases uptime, while at the same time providing a safer working operation as the operator doesn’t need to physically climb on the machine, as well as supporting the drive to a more sustainable business, according to Sandvik. Customer benefits include: • Remote access to your fleet 24/7 via a mobile device or PC • Optimize performance through monitoring of operational data • Maximize uptime through planned service and preventative maintenance • Quick and efficient support through remote visibility of machine • Safe and sustainable operation with reduced need to dispatch an engineer to site • Peace of mind through enhanced security with geofencing All Sandvik machines that are already fitted with My Fleet and working out in the field will automatically be granted the extended seven-year data subscription. This includes customers who have purchased the My Fleet retrofit kit. The retrofit kit can be fitted to all Sandvik 1 Series models onwards. For more information, visit www.rocktechnology. sandvik. 

Construction Equipment Guide • Aggregate Production and Recycling Section • www.constructionequipmentguide.com • January 2, 2022 • Page 19

TREES, BRANCHES, LIMBS, AND STUMPS ARE NO MATCH FOR A BANDIT® From roadways to right-of-ways, lot clearing to road clearing, get your work done faster and more efficiently than ever before with Bandit® machinery! Choose from different styles and sizes to suit your needs. Call today to reserve yours or to request a demonstration.

SMALL EQUIPMENT DEALERS

• Cost Effective Processing for Compact Equipment • Unique Portable Star Screening System for onsite projects • Screens without crushing or shredding with the buckets efficient rolling action

(Brush Chippers, Stump Grinders, Skid Steer Attachments)

• Wide Range of Buckets to suit 1 to 25 ton machines bobcatofnorthtexas.com 1302 S Stemmons Fwy. Lewisville, TX 75067 469-586-0000

616 Jealouse Way Cedar Hill, TX 75104 469-575-5339

1820 Mineral Wells Hwy. Weatherford, TX 76088 817-818-1600

2720 N Main Street Paris, TX 75460 903-706-5216

5633 Mark IV Parkway Fort Worth, TX 76131 817-654-2202

6029 N McDonald Melissa, TX 75454 214-307-7350

4612 Texoma Parkway Sherman, TX 75090 903-200-7129

1511 W Marshall Longview, TX 75604 903-758-5547

(602) 295-9645 sales@gyru-starwest.com www.gyru-starwest.com

Page 20 • January 2, 2022 • www.constructionequipmentguide.com • Aggregate Production and Recycling Section • Construction Equipment Guide

POWER MOTIVE CORPORATION www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900 Colorado Springs, CO • 719-576-5541 Durango, CO • 970-259-0455 Grand Junction, CO • 970-241-1550 Milliken, CO • 970-587-1188 Cheyenne, WY • 307-634-5149

ROAD MACHINERY LLC www.roadmachinery.com Phoenix, AZ • 480-545-2400 Phoenix, AZ • 602-252-7121 Prescott, AZ • 928-778-5621 Tucson, AZ • 520-623-8681 Bakersfield, CA • 661-695-4830 Hayward, CA • 510-659-1903 Fresno, CA • 559-834-3149 Mojave, CA • 661-824-2319 Perris, CA • 909-355-3600 Pico Rivera, CA • 562-699-6767 Redding, CA • 530-229-3820 Sacramento, CA • 916-375-3540 Santa Rosa, CA • 707-544-4147

CLAIREMONT EQUIPMENT www.clairemontequipment.com 7651 Ronson Road, San Diego, CA 92111 • 858-278-8351 1330 W Mission Road, Escondido, CA 92029 • 760-739-9100 8520 Cherry Avenue, Fontana, CA 92335 • 909-429-9100 440 West Aten Road, Imperial, CA 92251 • 760-355-7700 81-501 Industrial Place, Indio, CA 92201 • 760-863-5558 4726 Convoy Street, San Diego, CA 92111 • 858-278-8338

KIRBY-SMITH MACHINERY INC. www.kirby-smith.com

6715 W Reno Avenue • Oklahoma City, OK 73137 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

WAUKESHA-PEARCE INDUSTRIES, INC. www.wpi.com

12320 S. Main Street • Houston, TX 77035 • 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

Construction Equipment Guide • Aggregate Production and Recycling Section • www.constructionequipmentguide.com • January 2, 2022 • Page 21

BUILT TO CONNECT

Efficiency and Productivity Designed with safety and operator comfort in mind, the Shuttle Buggy® 3000 material transfer vehicle features adaptive cruise control, bright LED lighting, four-wheel steering for easy transport and ground-level maintenance access for added convenience. Operators can rely on clear sightlines and the ground operator is safely protected inside the structure of the machine. The Roadtec SB-3000 is the perfect blend of traditional craftsmanship and modern technology.

astecindustries.com

www.closner.com San Antonio Main Branch 21910 FM 2252 Schertz, TX 78154 210-732-2131 Dallas/Ft. Worth Branch 6532 East Hwy 114 Rhome, TX 76078 817-708-9108

Austin Area Branch 13800 FM 973 N Manor, TX 78653 512-272-8200

www.goodfellowcorp.com 12451 Old Hwy. 95 Boulder City, NV 89005 702-296-6553 390 N. 2000 W. Lindon, UT 84042 801-669-0388

12639 W. Butler Drive El Mirage, AZ 85335 480-285-8202

www.hermanequipment.com Northern California 9220 Viking PLace Roseville, CA 95747 916-783-9333

Southern California 2711 Lilac Ave. Bloomington, CA 92316 909-877-5597

www.modernmachinery.com Missoula, MT 800-332-1617

Eugene, OR 800-826-9811

Portland, OR 800-950-7779

Billings, MT 800-735-2589

Jarome, ID 800-221-5211

Rochester, WA 800-304-4421

Boise, ID 800-221-5211

Kent, WA 800-869-2425

Spokane, WA 800-541-0754

Columbia Falls, MT 800-434-4190

Pocatello, ID 800-829-4450

www.powermotivecorp.com 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550

Milliken, CO 970-587-1188 Durango, CO 970-259-0455 Cheyenne, WY 307-634-5149

Page 22 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Husqvarna Construction Plans Its Blastrac, Diamatic Surface Integration Husqvarna Construction announced its plans to further consolidate brands in the surface preparation segment. Over the coming years, the recently acquired Blastrac and Diamatic products, services and solutions will be rebranded as Husqvarna and integrated into the global Husqvarna offering. In January 2021, Husqvarna completed the acquisition of Blastrac, a provider of surface preparation equipment and solutions for the global construction and remediation industry. “We have now built one strong team with the commitment to deliver the best possible experience to our broad range of customers. With our combined expertise and our wider offering we are ready to serve our customers and shape the surface preparation industry for tomorrow,” said Stijn Verherstraeten, vice president concrete surfaces & floors, at Husqvarna Construction. The additional offering will considerably enhance the existing Husqvarna surface preparation portfolio by bringing advanced shot-blasting, scraping and scarifying solutions to Husqvarna customers and partners. Blastrac customers and partners will get access to new adjacent products such as compactors, concrete placement equipment, sawing & drilling equipment and demolition robots as well as a wide (digital) service offering. “We really look forward to giving our customers access to

ALASKA NC MACHINERY www.ncmachinery.com 800-478-7000 Anchorage, AK • 907-786-7500 Dutch Harbor, AK • 07-581-1367 Fairbanks, AK • 907-452-7251 Juneau, AK • 907-789-0181 Prudhoe Bay, AK • 907-659-6900 Wasilla, AK • 907-352-3400

the best and broadest surface preparation range in the industry – paired with what is probably the most competent and passionate team and all of this under one strong brand. We will build on the combined surface preparation portfolio and will further invest in innovation leadership over the years to come to make sure our customers can always count on us to complete their work in the most productive, sustainable and safe manner,” said Verherstraeten. The first wave of rebranded Blastrac and Diamatic products will be launched mid-2022 and will further shape and complement the Husqvarna offering for floor grinding, scarifying and scraping. The second wave targeting spring 2023 will include shot-blasting solutions and associated dust extractors. For more information, visit www.husqvarnacp.com. 

CIM Donates to World of Concrete Auction The Concrete Industry Management (CIM) program — a business intensive program that awards students with a four-year Bachelor of Science degree in Concrete Industry Management — announced that the signature item for its annual auction at World of Concrete is a truckmounted 38M concrete pump donated by Alliance Concrete Pumps, NORCAL Kenworth and Kenworth Truck Company.

• Vertical height: 121 ft. 9 in. • Horizontal reach: 108 ft. 7 in. • Unfolding height: 29 ft. 2 in. • 1st Section: 29 ft. 5 in. • 2nd Section: 25 ft. 9 in. • 3rd Section: 26 ft. 1 in.

six-speed automatic transmission • Front Axle: 20,000 lbs. • Rear Axle: 46,000 lbs. Neway air suspension • Base Warranty: 12 month/100,000 mi. Manufacturer’s Suggested Retail Price (MSRP) of the concrete and truck combination: $435,000. “Alliance Concrete Pumps is excited to donate their most popular boom pump model to the CIM auction,” said Clayton General Specifications White, president and CEO, • Pipe Size (ID): 125 mm (5 Alliance Concrete Pumps. “We Alliance Concrete Pumps, Norcal Kenworth and are also very proud to be part of in.) Kenworth Truck Company donated a 38M truck• Boom Control: Proportional mounted concrete pump to the 2022 CIM auction. procuring young and up-and(by HAWE) coming talent for the concrete • Radio Remote: Scanreco wireless • 4th Section: 27 ft. 4 in. industry.” dual transmitter system • Outrigger: X-Style The annual auction will be held Jan. • Vibrator: Standard • Front Spread: 20 ft. 8 in. 19, 2022, in the West Hall Room W106 • Water Pump: Hydraulic Power 20 • Rear Spread: 23 ft. of the Las Vegas Convention Center. bar (290 psi) For a full list of items, visit www.con• Water Tank: 800 L (211 G) Kenworth Conventional cretedegree.com/auction. • Wear Parts: Carbide Chassis Includes: Those interested in donating should • Model: T880 contact CIM Auction Committee Boom Specifications • Wheelbase: 290 in. Chairman Ben Robuck at • Number of booms: four sections • Engine: Paccar MX-13 455HP ben.robuck@cemex.com or 404/456• Folding type: Z Fold • Transmission: Allison 4500RDS 6867. 

CALIFORNIA HOLT OF CALIFORNIA www.holtca.com Pleasant Grove • 916-921-8969

COLORADO WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora • 303-739-3000 Denver • 303-433-2727 (Rental) Carbondale • 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs • 719-635-1669 719-390-7316 (Rental) Granby • 970-328-2080 (Rental) Gypsum • 970-328-2080 (Rental) Hayden • 970-276-3781 Silverthorne • 970-262-3788 (Rental) Fort Collins • 970-493-5005 (Rental) Grand Junction • 970-242-2834 970-245-6546 (Rental) Pueblo • 719-544-4433 719-544-0088 (Rental) Steamboat Springs 970-871-1990 (Rental) Windsor • 970-278-1750 (Rental) Burlington • (719) 346-5132 719-346-7880 (Rental) Durango • 970-259-2001 970-259-2001 (Rental) Windsor • 970-278-1750

IDAHO WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Caldwell • 208-350-6334 Hayden • 208-762-6690 Idaho Falls • 208-552-2287 Lewiston • 208-746-3301 Meridian • 208-888-2287 Pocatello • 208-232-2640 Twin Falls • 208-734-7330

NEVADA CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway, Henderson, NV 89052 • 702-649-8777 Elko • 775-738-9871 Reno/Sparks • 775-358-5111

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 23

NEW MEXICO WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista • 505-334-5522 (Rental) La Cruces • 575-647-9700 Albuquerque • 505-345-8411 505-938-2000 (Rental) Hobbs • 575-393-3665 575-393-2148 (Rental) Clovis • 505-235-3294 (Rental) Farmington • 505-327-5331

NORTH DAKOTA TRACTOR AND EQUIPMENT www.tractorandequipment.com Williston • 701-572-8377

WYOMING TRACTOR AND EQUIPMENT www.tractorandequipment.com Worland • 307-347-4747

MONTANA TRACTOR AND EQUIPMENT www.tractorandequipment.com Billings, MT • 406-656-0202 Billings-Sgt. • 406-245-4426 Bozeman • 406-585-5800 Great Falls • 406-761-7900 Helena • 406-442-2990 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Kalispell • 406-752-3030 Missoula • 406-721-4050

OREGON WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pendleton • 541-276-5812

TEXAS GEORGE P. BANE, INC. www.banemachinery.com Tyler • 903-597-6641 WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

WASHINGTON NC MACHINERY www.ncmachinery.com 800-562-4735 Seattle • 425-251-5800 Chehalis • 360-748-8845 Fife • 253-896-0878 Monroe • 360-805-6000 Mt. Vernon • 360-424-4292 Wenatchee • 509-886-5561 Yakima • 509-248-2371 WESTERN STATES EQUIPMENT COMPANY www.westernstatescat.com Pasco • 509-547-9541 Spokane • 509-535-1744

Page 24 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 25

Larger control valve and electronic controls deliver smooth, precise performance and up to 12% faster cycle times

Bane Machinery 2449 Manana Drive Dallas, TX 75220 800-594-BANE (2263) 10505 North Freeway Fort Worth, TX 76177 800-601-BANE (2263)

Shift-long comfort from a spacious cab, automotive-grade seat and ergonomically-designed, fullyadjustable arm rests

3402 E. NE Loop 323 Tyler, TX 75708 800-594-2200 www.banemachinery.com

Cisco Equipment 1706 S. 1st Street Artesia, NM 88210 800-748-1846 2707 Slaton Hwy. Lubbock, TX 79404 877-745-9595 520 SE Loop 338 Odessa, TX 800-657-3673 620 N. Bell Street San Angelo, TX 76903 800-496-0271 www.cisco-equipment.com

Award-winning Wide Angle Visual Enhancement System (WAVES) provides seamless 270° panoramic view

Ground-level access to routine service points cuts daily maintenance down to just minutes

Oklahoma Territory Construction Equipment 3839 West Reno Ave. Oklahoma City, OK 73107 405-917-9191 866-339-6827 2520 E King Street Tulsa, OK 74110 918-835-7200 866-334-6827 www.oklahomaterritoryequipment.com

Triad Machinery 1601 E. Bay Street Tacoma, WA 98421 253-722-5600 910 N. Thierman Road Spokane Valley, WA 99202 509-534-1900 1210 Dale Lane Mt. Vernon, WA 98274 360-488-3948 4440 SW Airport Road Prineville, OR 97754 888-662-2940 91251 Coburg Industrial Way Coburg, OR 97408 541-342-7700

Tier 4 Final engines deliver up to 12% improved fuel economy…and no DPF to maintain

Robust undercarriage with innovative side-frame design is easier to clean

Nueces Power Equipment 7667 N Sam Houston Parkway Humble, TX 77396 713-247-0066 www.nuecespower.com

18200 NE Riverside Parkway Portland, OR 97230 800-221-8512 www.triadmachinery.com

Page 26 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

John Deere 310SL Backhoe/Loader, 1:50 scale - $75

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $225

Roadtec RX-700 Cold Planner, 1:50 scale - $175

Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160

Allis Chalmers TS300 Cable operated Motor Scraper, 1:50 scale - $110

Vermeer BC1000XL Brush Chipper, 1:50 scale - $60

Caterpillar 769C Quarry Truck, $80

Komatsu PC360LC-11 Excavator, 1:50 scale - $125

Komatsu PC650 Hydraulic Shovel, $75

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $225

International TD-24 Crawler w/Cable Blade, 1:25 scale - $175

Cat D4, 2T Crawler w/Letourneau Push Blade & Hyster Winch, $235

Caterpillar 953 Track Loader, 1:50 scale - $130

Hitachi EH5000ac-3 Quarry Truck, 1:87 scale - $190

Bucyrus Erie 22-B Dragline, 1:50 scale - $290

Allis Chalmers Forty-Five Motor Grader, 1:50 scale - $110

Shipping and Handling Included

Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 27

Page 28 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

KOBELCO-USA.COM

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs.

Westrax Machinery 19618 S. Susana Rd. Rancho Dominguez, CA 90221 800-411-4717

SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

611 N. Golden Key St. Gilbert, AZ 85233 602-397-8173 www.westraxmachinery.net

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

Kubota Tractor Announces Leadership Change, Promotes Hanada to President Kubota Tractor Corporation announced the appointment of Shingo Hanada as the new president and CEO of Kubota Tractor Corporation (KTC) and Kubota North America (KNA), based in Grapevine, Texas, effective Jan. 1, 2022. Hanada is a 32-year Kubota veteran who most recently held the position of executive officer, Kubota Corporation, and president of Kubota Holdings Europe B.V. and Kverneland AS in the Netherlands and has previously spent time in the United States in various roles. In conjunction with this announcement, the current President and CEO Haruyuki (Harry) Yoshida will retire from the role of senior managing executive officer, Kubota Corporation, Japan, and the position of president and CEO of KNA and KTC. Yoshida took the presidency of KNA and KTC in January 2019 and has successfully built and enhanced the regional functions and operations of Kubota North America as the company continues on its high-growth trajectory. “Kubota Tractor Corporation will celebrate 50 years in the U.S. in 2022, and I’m honored to join KTC as we celebrate our history and our 50th anniversary,” said Hanada. “I am eager to continue the tremendous momentum Kubota has experienced over the last several years under Mr. Yoshida’s leadership. We are committed to expanding our product lines and building our infrastructure to better meet the needs of our customers and dealers, and I am confident we will continue to further strengthen the Kubota brand in the U.S. market-

Shingo Hanada

Todd Stucke

place and throughout North America in the process.” The executive leadership announcements include a promotion for Todd Stucke, vice president, sales and marketing, KNA, and senior vice president, marketing, product support & strategic projects, KTC, will be promoted to executive officer of Kubota Corporation, Japan, serving as senior vice president, sales and marketing, KNA, in addition to maintaining his role as senior vice president of KTC. Stucke will be involved in Kubota Corporation’s operations and focus on building a robust business structure for the North American market, as the company continues to invest and grow in the United States and Canada. For more information, visit www.kubotausa.com. 

TRI-WEST TRACTOR 6281 Southfront Rd. Livermore, CA 94551 925-455-8200 www.tri-westtractor.com

APCO Equipment 3432 N 5th Street North Las Vegas, NV 89032 702-871-7474 www.apcoequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 29

Dig More. BUILD MOR RE. DO MOR O E.

EXPECT MORE FROM YOUR EXCAV C VATO T R. '&%$#"! #! # ! #& % " & # "# ! ! # # " & # % # ! # ! %# # anywhere else, KOBELCO excavators are made to get more done each day than you ever %$! $%# ! & " # " #%$ # ""# # #%$ # & # # % # ! %#! #%$ # # " # % ! # & &%# ! #"! "# " #%!# #%$ # ! "#%$ % # & $%# ! # ! # ! # &% #

KOBELCO-USA.COM

21-KO 21-KOBELCO-0642_NewDealer_ OBELCO-0642_NewDealer_ _Ad _Ad2_RUN.indd d2_RUN.indd 1

Scott Equipment 14635 Valley Blvd. Fontana, CA 92335 909-822-2200 • 800-316-0327 www.scottequip.com

7//7/21 7/7/21 7/ 3:17 7 PM

BANE MACHINERY, INC. 2449 Manna Rd. Dallas, TX 75220 214-352-2468

Tyler, TX 903-597-6641 www.banemachinery.com

Fort Worth, TX 817-847-5894

Orion Equipment 18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Page 30 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1090 W 2181 N Salt Lake City, UT 84116 801-322-1300 atlasmachinery.us

6565 Smith Avenue Newark, CA 94560 510-400-5024

1535 SE 25th Street Oklahoma City, OK 73129 405-310-8700 Equipmentshare.com

2035 W Mountain View Road Phoenix, AZ 85021 480-463-4999

IEDAAwards Scholarships to Three Diesel Tech Students The Independent Equipment Dealers Association’s (IEDA) 2021 President James Rinehart and IEDA Executive Director David Gordon presented $5,000 scholarships to three students Dec. 15, at Western Technical College in Lacrosse, Wis., during a short ceremony at the school's heavy diesel program shop. On the eve of its 20-year anniversary celebration in 2022, IEDA created a scholarship program this year for students enrolled in a heavy equipment diesel program who are pursuing careers as construction equipment technicians. Fifteen applications were received. Two $5,000 scholarships funded by the association were presented to David Roberts and Natasha Normand; an additional $5,000 was recently donated by Rick Newman, owner of Newman Tractor, to create a third scholarship, which was awarded to Jacob Evers. “We are keenly aware of the challenges our industry faces in

The Independent Equipment Dealers Association's 2021 President, James Rinehart and Executive Director Dave Gordon traveled to Lacrosse, Wis., to personally award $5,000 scholarships to future equipment technicians studying at Western Technical College. (L-R): Jacob Evers, Dave Gordon, David Roberts, James Rinehart and Natasha Normand.

attracting new talent, which is why IEDA is resolved to show our support in a tangible way to those who want to enter our workforce,” said

Rinehart, who is general manager of Performance Equipment in Erie, Colo. “An IEDA scholarship program has been the hope and goal of

the IEDA board, and we couldn’t be prouder to encourage these hard-working, top students with financial assistance that will make

a difference as they complete their technical education.” Criteria for scholarship selection was based on academic merit, personal character and demonstrated financial need. Roberts currently holds a 3.97 average in the Diesel and Heavy Equipment program at Western Tech. He said he is thrilled to be the first person in his family to graduate with a college degree and hopes to inspire others who choose a similar path. Military veteran Natasha Normand completed the two-year Automotive Technician program with a 4.0 GPA, graduating at the top of her class. She is now enrolled full-time in the diesel program, while working part-time and caring for her three-year-old daughter. Jacob Evers is a self-starter who is putting himself through school — he said he prides himself on a strong work ethic and determination, which IEDA’s scholarship committee believes will be invaluable assets in his career path. 

SECTION

Attachments Pages 31-36

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Caterpillar Introduces New Performance Series Hammers Built for high production on large excavators, the new Cat H190 S and H215 S Performance Series hammers deliver consistent breaking power. Their efficient operation cycle results in less waste from internal heat for more power delivered to the tool, according to the manufacturer. With piston and tool matched in diameter and mass, these new hammers offer increased power transmission frequency. Operators can switch power mode from high frequency/low power to low frequency/high power, giving the ability to fine tune power to the material being broken. While powerful, the new H190 S and H215 S hammers lead in operator comfort and machine protection with their proprietary buffering material that dampens vibration feedback to the carrier. Automatic shut-off that prevents blank firing and hammer damage can be temporarily turned off for horizontal and overhead operation in tunneling and mining applications. The flexible hammers can be configured for joystick or

pedal control to suit the operator’s preference when working in quarry, demolition and general construction applications. Cat Excavator Pairing Advantages Tuned to deliver the highest possible work rates with Cat next gen excavators, the new H190 S hammer is sized for operation on Cat 349 through 374 models, while the larger H215 S is designed for the 374 and 395. Auto Stop instantly terminates hammering when the tool breaks through material, preventing damage to both the carrier and hammer. Next gen excavators automatically recognize the H190 S and H215 S hammers and prompt operators to select the correct tool program. Protecting the cab and keeping the attachment in predefined operating areas at the job site, the new hammer dimensions are included in Cat E-Fence technology. Through the Cat excavators Product Link technology, users can quickly locate the hammer attachment using the Cat App. Hammer pressure and flow rates are viewed on the

With piston and tool matched in diameter and mass, these new hammers offer increased power transmission frequency.

in-cab monitor and can be configured manually or automatically using the touchscreen display.

The flexible hammers can be configured for joystick or pedal control to suit the operator’s preference when working in quarry, demolition and general construction applications.

Minimized Maintenance All daily checks and routine service can be performed without removing the new H190 S and H215 S hammers from the carrier, saving time. Steady internal gas pressure throughout the duration of the annual service interval eliminates the need for frequent charge inspection. The lower bushing’s rotatable design optimizes service life to minimize parts costs, while the bushing can be quickly serviced in the field using hand tools. A standard on-board autolube system provides continual greasing during hammer operation to improve attachment longevity. For operating in extreme environments, an optional wear package protects the hammer housing from damage. For more information, visit www.cat.com. 

Page 32 • January 2, 2022 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Komatsu Expands Its Range of Hydraulic Breakers Used in a variety of rock and concrete demolition applications from scaling a tunnel, to running a pedestal-boom on a quarry, or tearing out reinforced concrete abutments, breakers are essential tools. Designed and tested for compatibility with Komatsu excavators from the PC210 up to the PC490, Komatsu’s new JMHB-V breaker series helps customers achieve excellent impact energy and performance in a variety of demolition applications, according to the manufacturer. High Productivity, Efficiency With minimal wasted energy and subsequent higher operating efficiency, Komatsu’s 100 percent hydraulic-fired Vseries breakers modulate their impact force and frequency with up to 16 working positions to match most application’s requirements. Designed to help maximize productivity while helping lower cost per ton, the breakers also are fitted with an innovative energy-saving recovery valve that recuperates energy to drive efficiency. Fully Variable Technology Depending on the application’s hardness, V-series breakers automatically select the best piston stroke length and speed. By adjusting to either hard material, with long

and powerful strokes, or to softer material, with shorter, faster strokes, the breakers can achieve high production output, with little wasted impact energy. Valuable Standard Features To help owners get more from their

investment, Komatsu’s V-series breakers have several valuable standard features, including automatic greasing, advanced blank firing protection, swivel hose couplings and heavy-duty housing. The shockdampening systems in the form of upper and lower suspensions help reduce the risk of

Depending on the application’s hardness, V-series breakers automatically select the best piston stroke length and speed. By adjusting to either hard material, with long and powerful strokes, or to softer material, with shorter, faster strokes, the breakers can achieve high production output, with little wasted impact energy.

cracking excavator booms and breaker housings, while the mounted standard automatic lubrication feature helps guard against contamination caused by dust and debris. Control Vibration, Noise For greater operator comfort, suspensions with rubber/poly components help absorb impact and reduce vibrations through the boom. The completely enclosed sounddampening housings reduce the amount of noise generated when compared to open style breakers, to offer customers a solution to addressing noise ordinances in urban applications. Equipped for Dependability To support regular maintenance of breakers, inspection kits are included with gauges to measure wear on all critical components. Additionally, these breakers are backed by the Komatsu North America Attachment Division, a dedicated hydraulic attachments sales and service team that supports Komatsu distributors. These specialists are factory-trained and experienced with installation, operation, service and rebuilds. For more information, visit www.komatsu.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • January 2, 2022 • Page 33

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engine eered and y that prov p vides safer and feature the Ultralo ok® tooth system easier tooth repla acement. Combined with premium p m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

U a Ultra alok® Tooth o System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades ess™ Cutting Edgess a and Acce essories

KIRBY-SMITH MACHINERY INC. WWW.KIRBY-SMITH.COM ABILENE, TX • 877-577-5729 AMARILLO, TX • 800-283-1247 DALLAS, TX • 800-753-1247 FT. WORTH, TX • 877-851-9977 HEWITT (WACO), TX • 254-261-1370 LUBBOCK, TX • 866-289-6087 MCALESTER, OK • 918-310-1550 ODESSA, TX • 877-794-1800 OKLAHOMA CITY, OK • 800-375-3339 TULSA, OK • 800-375-3733

www.esco.weir

MODERN MACHINERY WWW.MODERNMACHINERY.COM MISSOULA, MT • 800-332-1617 BILLINGS, MT • 800-735-2589 BOISE, ID • 800-221-5211 COLUMBIA FALLS, MT • 800-434-4190 EUGENE, OR • 800-826-9811 JEROME, ID • 800-221-5211 KENT, WA • 800-869-2425 POCATELLO, ID • 800-829-4450 PORTLAND, OR • 800-950-7779 ROCHESTER, WA • 800-304-4421 SPOKANE, WA • 800-541-0754 Copyright ©, WEIR and the WEIR Logo are trademark ks and/or registered trademarks of We eir Engineering Services Ltd.

Page 34 • January 2, 2022 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

Tigercat Releases E-Series 822 Feller Bunchers, Harvesters Tigercat has released the 822E series feller bunchers and harvesters with the latest features and upgrades. The 822E is the most compact track feller buncher and harvester platform in the Tigercat track carrier line-up. The powerful machine is versatile for challenging thinning and final felling applications. Strong lift capacity, tight-tuck ER boom geometry and compact tail-swing make the 822E the perfect choice for selective felling where minimal site impact is important, according to the company. The harvester configuration is available with a fixed or leveling undercarriage. High horsepower and harvester head optimized hydraulics provides responsive control, quick feed speed and powerful delimbing capability for high performance and productivity. The 822E series carriers can be equipped with the Tigercat FPT N67 Non-certified, Tier IVf or Stage V engine, producing 282 hp (210 kW). A redesigned engine enclosure pro-

vides improved roof access for clearing debris. A boom slider also reduces debris build-up in hard-to-reach areas. The clamshell-style enclosure and drop-down side platform allow easy access to all sides of the engine, valves and daily service points. A hot shutdown feature has been added, which allows the turbo to sufficiently cool before stopping the engine, for improved turbo life. A larger, spring-assisted pump cover improves service access to the hydraulic pump area. Hydraulic improvements include quicker anti-stall response, consistent anti-cavitation flow and improved heat rejection. The updated E-series cab includes a new parallel action air ride seat with integrated heating and cooling. The reclining seat is fully adjustable with seat angle and seat extension adjustment and the wider seat cushion and lumbar support provide operator comfort all day long. The full-length front window and narrow side posts give the operator an enhanced view of the tracks and surrounding area. The HVAC controls feature a new infinitely variable fan speed control, which can be adjusted on the control panel, or by the machine control system touchscreen. Additional features include an emergency stop button and multiple storage locations with nets to keep objects in place. For more information, visit www.tigercat.com. 

Strong lift capacity, tight-tuck ER boom geometry and compact tail-swing make the 822E the perfect choice for selective felling where minimal site impact is important, according to the company.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • January 2, 2022 • Page 35

Page 36 • January 2, 2022 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

Modern Machinery

Waukesha-Pearce Industries, Inc.

www.modernmachinery.com

www.wpi.com 12320 South Main Street Houston, TX 77035 713-551-0506 Austin 512-251-0013

Beaumont 409-721-5305 Buffalo 903-322-7150 Corpus Christi 361-884-8275

Edinburg 956-386-0107 Kilgore 903-984-2011 San Antonio 210-648-4444

Tomball 281-351-9016

4610 Cloudburst Way Eugene, OR 97402 800-826-9811 541-688-7321 Portland, OR 971-222-1710

Rochester, WA 360-273-4284 Kent, WA 253-872-3500 Spokane, WA 509-535-1654

Kalispell, MT 406-755-5540 Missoula, MT 406-523-1100 Billings, MT 406-252-2158

Boise, ID 208-336-8570 Jerome, ID 208-324-4522 Pocatello, ID 208-233-5345

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 37

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Powe er on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Air Compressor Solutions, Inc.

Ditch Witch of Arizona

Ditch Witch of Southern Arizona

www.acsir.com

www.ditchwitchaz.com

TEXAS Odessa (432) 335-5900 Amarillo (806) 383-1213

ARIZONA Phoenix (602) 437-0351

ARIZONA Tucson (520) 579-0261

Sierra Machinery, Inc. www.sierraelpaso.com

TEXAS El Paso (915) 772-0613

NEW MEXICO Artesia (575) 746-6592

Volvo Construction Equipment & Services www.vcesvolvo.com

CALIFORNIA Bakersfield (661) 387-6090 Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244

San Diego/ Lakeside (619) 441-3690 Corona (951) 277-7620

MAKE POWER MOVES.

Papé Material Handling Inc. www.papemh.com

OREGON

NEVADA

Portland (503) 639-8910 Portland (503) 286-6400 Eugene (541) 689-7407 Medford (541) 779-3444

Sparks (775) 356-9333

WASHINGTON Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386

Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

Trucks & Trailers

SECTION

Pages 38-39

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Western Star Adds to Purpose-Built Lineup With New 47X Western Star introduced the newest addition to its purpose-built vocational lineup, the all-new Western Star 47X. The truck complements the Western Star 49X to establish the Western Star X-Series and extend the platform’s reach into entirely new vocational applications. With a standard 111.6 in. BBC, the 47X is well-suited to regions or applications that require a shorter overall vehicle length, such as drywall trucks, and for those that need to meet federal or local bridge law requirements, such as mixers or super dumps, an optional 110.8 in. BBC. With the shorter hood and a wheel cut up to 50 degrees, the 47X further optimizes maneuverability for work on construction sites or operation in congested urban environments. “With the 47X and the 49X, we can offer our vocational customers different options that will give them the right tool for their specific job needs,” said David Carson, senior vice president, sales and marketing, Daimler Trucks North America (DTNA). “The vocational segment is a broad segment, covering many different applications, and our Western Star X-Series reflects that reality. Whether their work be heavy-haul, logging and timber operations or construction, we have the right Star for our customers. Lighter Heavyweight Western Star has a long legacy of manufacturing durable, hard-working trucks. With the X-Series, DTNA engineers have evolved that legacy to consider the needs of today’s customers and have completely reimagined the modern vocational truck. “A key priority was to consider how to reduce mass without compromising strength,” said Tracy Mack-Askew, chief engineer of chassis, propulsion and vocational engineering, DTNA. “From the cab to the frame rails, to powertrain and battery configurations, we examined all features to deliver weight savings to our customers for greater productivity and profitability.” The 47X is approximately 200 lbs. lighter than the 49X in like-for-like spec and is best for weight-sensitive applications like mixers and bulk haul. All X-Series trucks have tougher, yet lighter, single-channel frame rail options versus legacy products. The platform offers frame rails with best-inclass RBM (resisting bending moment) of up to 3.8 million inch-lbs. to last longer and return greater payload. A new 9.5mm single channel rail option is available and features comparable strength as today’s 11-mm rail. Standard highstrength aluminum forward, rear and end-of-frame crossmembers further reduce mass, as does a new two-battery option. Cab Fit for Kings The X-Series steel-reinforced aluminum cab further reduces mass by up to 8 percent while offering greater driver comfort with 13 percent more space than competitors. An optional two-person bench seat is available for applications

demanding a large on-site crew, and a new space-optimized, in-cab battery box affords additional legroom to the operator. An optional roof-mounted condenser offers maximum airflow through the radiator for stationary applications like construction and mining while keeping operators comfortable. All X-Series models come standard with operator-centric features such as a wrap-around dash that provides easy access to the driver command center and B-panel. On the Bpanel, a flex panel can be prepped for a tablet or configured

All X-Series models come standard with operator-centric features such as a wrap-around dash that provides easy access to the driver command center and Bpanel.

for an additional 12 switches or 10 gauges. The truck’s interior also includes upscale appointments such as metal accents, while all-metal exterior brightwork is distinctive as well as durable. The 47X’s unique hood offers forward visibility of 24.8 ft. — an 11-in. improvement over the 49X — while its composite construction and ISO Tech suspension system resists bending and cracking by absorbing and dissipating vibrations from road inputs. Real Power Play The 47X comes standard with the Detroit DD13 Gen 5 engine, which features higher compression ratios and a new swirl piston design to further improve combustion and efficiency. ThermoCoasting in the DD13 Gen 5 prevents aftertreatment cool-down during a driving regen to keep the system at its optimum temperature and significantly reduce the need for parked regens. For weight-sensitive applications, the Cummins L9 and X12 engines are available for the 47X. Optional front-engine power take-off (FEPTO) is offered on both Cummins engine offerings and the Detroit DD13 for applications like snow-

plows. Similarly, rectangular fuel tanks and a raised aftertreatment system mounting are offered with Cummins engines for better clearance for belly plows, making them a clear choice for municipalities and customers maintaining critical roadways in the winter months. The 47X is also offered with the all-new DT12-V transmission, which is built on the proven DT12 and has more than 35 million miles of vocational-specific testing. The DT12 includes three work-ready mode applications: Rockfree mode, Off-road mode, and Paver mode for the challenges of specific vocational applications. Standard for any 47X equipped with the DD13 Gen 5, the Detroit Assurance suite of active safety systems brings active safety solutions to the vocational segment, including active brake assist, side guard assist, adaptive cruise control and more to keep operators, workers at the job site, pedestrians and other motorists safe. Ready to Work Faster Western Star partnered with leading truck equipment manufacturers (TEMs) to ensure the X-Series supports fast and efficient upfits. The 47X’s mid-chassis packaging has a number of clear back-of-cab configurations while unobstructed frame rails provide more efficient body integration. The QuickFit Interface System offers ready access to electrical architecture and was designed for easy TEM interface, programming and access to power. The CHEC Tool from DTNA enables TEMs and dealers to view and modify electrical configurations, giving them the power to customize inputs and outputs and change parameters within minutes. “With the power of QuickFit and CHEC, you can take things that were once considered to be complex, expensive or impossible to do and accomplish them more easily and efficiently,” said Carson. A Flex Panel located in the dash B-panel of the truck gives TEMs the ability to mount body controllers, making Western Star the only OEM that doesn’t require compromising space between the seats to do so. The Flex Panel can also accommodate additional gauges, switches, or a RAM Mount prep, depending on customer needs. The 49X remains an unmatched workhorse ideally suited to heavy haul and logging operations. Both models — depending on spec — are also ready to tackle oil field, towing & recovery, bulk haul, crane and dump applications. “With the addition of the 47X to the X-Series line-up, Western Star is offering fresh, modern trucks with purposeful technologies to enable all vocational customer’s success. The wide breadth of segment coverage means that there’s a Star for every need,” Carson said. The all-new 47X is available for order now and delivery to customers begins in early 2022. For more information, visit https://daimler-trucksnorthamerica.com/47x .

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • January 2, 2022 • Page 39

Kenworth C500 Now Available With Bendix ESP System Kenworth recently announced that the Bendix ESP Electronic Stability Program is now available as an option for the Kenworth C500. The Kenworth C500 is Kenworth’s largest workhorse truck with a GCWR up to 500,000 pounds. It can be used for a variety of tough off-road and heavy-haul applications. The Bendix stability system for the Kenworth C500 comes with the Bendix 6S/6M configuration, which has six sensors and six modulators, and includes Bendix Smart ATC Automatic Traction Control and Bendix ESP. The Bendix technology is designed to help stabilize the vehicle during loss of control situations on dry, wet, snow and ice-covered roadways. In addition to using sensors that monitor lateral acceleration, as found on some roll-only systems, the Bendix ESP full-stability system also uses sensors to monitor steering angle and vehicle direction. This allows for detection of a vehicle’s impending loss of stability and automatic intervention through de-throttling of the engine and selective application of tractor steer and drive axle brakes, along with trailer brakes, helping the driver to maintain control of the vehicle in a variety of situations. Bendix noted that its safety technologies complement safe driving practices and are not intended to enable or encourage aggressive driving. No commercial vehicle safety technology replaces a skilled, alert driver exercising safe driving techniques and proactive, comprehensive driver training. Responsibility for the safe operation of the vehicle remains with the driver at all times. For more information, visit www.kenworth.com. 

The Bendix stability system for the Kenworth C500 comes with the Bendix 6S/6M configuration, which has six sensors and six modulators, and includes Bendix Smart ATC Automatic Traction Control and Bendix ESP.

NTEA Urges Excise Tax Repeal On Heavy Trucks, Trailers NTEA commends U.S. Senators Todd Young (R-IN) and Ben Cardin (D-MD) for introducing S. 2435, the Modern, Clean, and Safe Trucks Act of 2021. This bipartisan bill would repeal the 12 percent federal excise tax (FET) on heavy trucks and trailers. NTEA calls on Congress to repeal the FET as a part of any upcoming infrastructure legislation. Eliminating the FET would provide Congress the opportunity to create longterm stability in the Highway Trust Fund by replacing the FET with a funding source not based on annual truck sales. “NTEA is a longstanding advocate of repealing the more than 100-year-old burdensome and complex tax, and is a founding member of the Modernize the Truck Fleet coalition,” said Steve Carey, NTEA’s president and CEO. “We believe repeal will help fleets to replace older and less fuel-efficient heavy-duty trucks with safer and more environmentally friendly new trucks.” Repealing the FET would allow purchasers to more readily integrate cleaner and safer vehicles into their

fleet and will help protect U.S. jobs. Additionally, repeal would clear the way to better alternative funding mechanisms for highway repair and maintenance. Senator Young stated, “Our bipartisan bill will open the floodgates to investment in safer and cleaner trucks and trailers that will benefit our economy and the environment.” The FET, originally created in 1917 to help pay for World War I, is the highest percentage excise tax levied by the federal government. Adding the tax on top of the costs associated with the latest emissions technology for heavy-duty trucks forces many small businesses to delay purchasing a new vehicle. 

Page 40 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

We Deliver Worldwide!

Quality Used Water Trucks & More 2013 Ford F750 2019 International DuraStar 4300 $51,900 Stock# 19F20WT, 2K tank Stock# 13K49WT, stick shift, 8800

2007 F750 $45,000 Stock# 07G44WT, 2K W/T.

2015 Peterbilt 337 $49,900 2016 Peterbilt 348 Stock# 15H43WT, air sprays, 6.7 Stock# 16C20WT, 4K tank engine, A/T

2019 IHC Box Truck $46,900 Stock# 19A08CC, Cummins, A/T,

Trade-Ins Accepted Call for Pricing (602) 437-3980

Warranty Add-Ons Available

156 E. Mohave Street Phoenix, AZ 85004

Parts

www.SuperiorEquipmentInc.com

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

SEE YOUR BARGAIN AD IN COLOR.

ONLY $60 EXTRA Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 1-2 EB

FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

Ritchie Bros. Reports Loader Backhoe Prices Up 15 Percent Ritchie Bros.’ December Market Trends Report continues to show positive pricing trends across all its equipment indexes, with truck tractor prices up 55 percent in the United States, while medium earthmoving equipment and vocational trucks are up 43 percent and 41 percent respectively (for the three months ending November 30, 2021). With this month’s report, Ritchie Bros. has included a special focus on loader backhoe sales in the United States and Canada. According to Ritchie Bros.’ Market Trends tool, median backhoe pricing is up approximately 15 percent in the United States. The free December report is available for download at: rbassetsolutions.com/market-trends-report. “Loader backhoe volumes have declined while demand has strengthened, resulting in strong pricing for the incredibly versatile machine,” said Doug Olive, senior vice president (pricing), Ritchie Bros. “In 2016 we sold close to 3,000 backhoes in the United States. Through 11 months in 2021 we’ve only sold 1,815, but the median price has increased 15 percent.” Doug Rusch, managing director of Rouse

Sales, added, “Retail values continue to climb, having increased more than 16 percent since the beginning of 2021, reflecting a strong pricing environment for sellers. Transaction volumes in the retail space are also healthy and auction values have increased 3.2 percent in November. All signs point to strong end-market demand for machines right now.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 41

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): INTERNATIONAL MODEL FUEL / LUBE TRUCKS, ALL MODELS. LOOKING FOR 1 OR 2 FUEL TRUCKS. THEY WOULD NEED TO BE: AUTOMATIC TRANSMISSION -DECENT MILES, ENGINE HOURS -PREFERABLY MULTIPLE COMPARTMENTS -PREFERABLY INTERNATIONAL, BUT NOT A MUST -NO DPF, OR MAXXFORCE ENGINES. ONE WOULD BE MAXIMUM $40,000 RANGE, AND THE OTHER AS CHEAP AS POSSIBLE. THANK YOU. EMAIL: MANAGER@ COMMERCIALFLEETSUPPLY.COM; PHONE: 347-489-4474 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 LC-5 EXCAVATORS. WE ARE LOOKING FOR USED HEAVY CONSTRUCTION MACHINES. PLEASE OFFER US FOLLOWING MENTION MACHINES & EMAIL US DETAILS WITH PICTURES CATERPILLAR MOTOR GRADERS 140G CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966FII, 970F, 980F HITACHI EXCAVATORS EX200, EX200LC, EX270LC, EX400, EX400LC, EX300LC, EX330LC-5, EX450LC-5, EX400-5, EX60WD, EX100WD. JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM PHONE: +923332316587 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 950B WHEEL LOADERS - LOOKING TO BUY CAT WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. EMAIL: NAQIB_KHAN73@YAHOO.COM PHONE: +923333298751 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE ARE INTERESTED IN BUYING CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADER 140G AND 140H. (RUNNING OR NONRUNNING MACHINES). EMAIL: AHMED@IUKANDCO.COM PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR EXCAVATORS, ALL MODELS; LOOKING FOR SEVERAL CAT 330DL, 336DL, 336EL EXCAVATORS UNDER 10,000 HOURS AND WHOLESALE PRICED. EMAIL: LJEQUIPMENT3@GMAIL.COM; PHONE: 1-3309873508 ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI EXCAVATORS, ALL MODELS; LOOKING FOR OLDER HITACHI EXCAVATORS AND CAT WHEEL LOADERS, IN GOOD RUNNING CONDITION OR NON-RUNNING MACHINES. EMAIL US TO DISCUSS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI EX 400 AND 450 SIZES EXCAVATORS. EMAIL: IUKANDCO@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CAT WHEEL LOADERS - WE NEED CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS HITACHI EXCAVATORS – WE NEED TO BUY HITACHI EXCAVATORS ZX 200-1, ZX 330, ZX 450, ZX 650, ZX 850 EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. ALSO KOMATSU EXCAVATORS PC400, KOMATSU PC 450-6, KOMATSU PC 7506. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW, THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING TO BUY THESE MODELS OF USED CATERPILLAR WHEEL LOADER 950B, 950E, 966E, 966F ,966F-II. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA-600-3, WA-600-6, WA-30, WA-40, WA 50. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE INTERESTED IN BUYING JOHN DEERE EXCAVATORS 790, 495 & 595 AND HITACHI EXCAVATORS EX 270-1, EX 270-5, EX 300-1, EX 400-1 AND EX 450-5. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE INTERESTED TO BUY CAT USED WHEEL LOADER 916, 926, 936, 950B/E, 966E/D/F, 970F, 980C, 980F. IF AVAILABLE PLEASE EMAIL US: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 ––––––––––––––––––––––––––––––––

WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR MOTOR GRADERS - WE ARE INTERESTED TO BUY CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE.. MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VWERIZON.NETR; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 –––––––––––––––––––––––––––––––– WANTED (WV): NELSON 6000 WELDERS - LOOKING FOR NELSON DUAL GUN SYSTEM WITH GEN SET AND TRAILER, AND/OR PRO-WELD DUAL GUN ARC 3000 MACHINE. EMAIL: WEH@ TRIANGLEINCORPORATED.COM; PHONE: 304-562-6282 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CHALLENGER 85C TRACTORS - I AM IN NEED OF A USED SET OF TRACKS FOR ANY OF THE CAT CHALLENGER 65, 75 OR 85C. EMAIL: PI2279@YAHOO.COM; PHONE: 319-470-8388 –––––––––––––––––––––––––––––––– WANTED (MA): ALL MODELS CATERPILLAR EXCAVATORS - LOWER SUPPORT RAIL GOES FRONT TO BACK RIGHT SIDE AND TOOL BOX RH SIDE LOWER RAIL THAT GOES FRONT TO BACK SUPPORTING TOOL BOX. EMAIL: BILLD@TDICENZO.COM; PHONE: 207-214-9610 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS, MODEL 580SK, 580L, 580LII, 580SL, 580SLII, 580M, 580MII, 580MIII 580SMII, 580SMIII, 580SMIII EMAIL: FRANKHORAN@GROFFTRACTOR.COM; PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY USED HITACHI EXCAVATORS EX200LC, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODELS. I NEED TO BUY CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 ––––––––––––––––––––––––––––––––

WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 ––––––––––––––––––––––––––––––––

Page 42 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Online Timed January 15 - 22, 2022 For: Rental Fleet Construction Equipment & more • Online Timed Jan. 19 – Feb. 2, 2022 For: Multiple Pennsylvania Locations • Youngstown, OH Fri., January 28, 2022 For: Retirement, Complete Liquidation Trucking & Construction Company • Columbus, OH Sat., January 29, 2022 For: Very Late Model Construction Equipment & more • Bushnell, FL February 5 - 13, 2022 For: Annual Florida Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• Marietta, PA Fri., February 11, 2022 For: Truck, Trailer & Equipment For: January 2022 Tools & Auction Business Equipment

BAR NONE AUCTION www.barnoneauction.com 866-372-1700

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Live & Online Bidding Fri., January 21, 2022 For: Thompson Services Retirement Auction

• Virtual Live Wed., January 12, 2022 For: Nestlerode Contracting Co., Inc. Surplus Liquidation

• Kissimmee, FL February 14 - 16, 2022 For: Annual Florida Auction

• Online Fri., January 28, 2022 For: Woodburn, OR Monthly Public Auction

• Western New York Fri., February 25, 2022 For: Retirement, Complete Liquidation, Trucking Company BIDADOO AUCTIONS www.bidadoo.com • Middletown, NY 1-877-BIDADOO Sat., March 5, 2022 For: Two Retirements, • Online Construction Equipment & January 4, 2022 Truck/Trailer Auction • Online January 11, 2022 RITCHIE BROS. • Online AUCTIONEERS January 18, 2022 www.rbauction.com 402-421-3631 BIG IRON AUCTIONS All our auctions are www.bigiron.com now online bidding only! 800-937-3558 • Houston, TX • Online February 15 – 16, 2022 December 29, 2021 • Orlando, FL • Online February 21 - 26, 2022 January 5, 2022 For: Annual Florida Auction • Online January 12, 2022

AUCTIONS INTERNATIONAL www.auctionsinternational.com • Online 800-536-1401 January 19, 2022 • Online Dec.27 – Jan. 2, 2022 HANSEN AUCTION GROUP • Online www.hansenauctiongroup.com January 3 – 9, 2022 920-383-1012 • Online • Online January 10 - 16, 2022 Ends January 11, 2022 For: Flannery Trucking Fleet • Online Replacement Auction January 17 - 23, 2022

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Online Only Wed., January 12, 2022 For: Heavy Equipment, Semi, Truck, Trailer Consignment Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Timed Online Ends January 6, 2022 For: Public Auction • Timed Online Ends January 11, 2022 For: Public Auction • Timed Online Ends January 11, 2022 For: Surplus & Forfeiture Auction • Timed Online Ends January 13, 2022 For: Surplus & Forfeiture Auction • Timed Online Ends January 18, 2022 For: Public Auction

• Online January 4 - 11, 2022 For: January NetAuction Edition 1

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 STEFFES GROUP INC. www.steffesgroup.com • Online Only 701-237-9173 Ends January 12, 2022

• Online Ends January 5, 2022 For: Rye, NY Commercial Surplus Vehicle Auction

• Online Sat., January 8, 2022 For: Sacramento, CA Monthly Public Auction

RTI AUCTIONS www.teitsworth.com 585-243-1563

• Timed Online January 7 – 12, 2022 For: Steffes Auction – Upper Midwest Locations • Timed Online January 12 - 19, 2022 For: City of Fargo Street Sweeper Auction • Timed Online January 21 - 26, 2022 For: Steffes Auction – Upper Midwest Locations

MIDEAST EQUIPMENT AUCTIONS • Timed Online www.mideastequip.com February 4 - 9, 2022 860-370-9993 For: Steffes Auction – Upper • Live Online Midwest Locations Tues., January 25, 2022 • Timed Online For: H&K 2nd Annual Truck & March 23 - 30, 2022 Equipment Auction For: Steffes Auction – Upper Midwest Locations PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • Online Tues., January 11, 2022 For: Government Auction • Online Wed., January 12, 2022 For: Vehicle & Equipment Auction • Online Thurs., January 13, 2022 For: Construction Equipment ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668

VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Lake Elsinore, CA Sat., January 22, 2022 For: Heavy Construction Equipment & more WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., January 8, 2022 For: Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990

• Online Begins Closing January 19, 2022 • Kissimmee, FL For: Construction & February 16 – 19, 2022 Contracting Equipment Auction For: Annual Florida Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 43

Public Auction held the 2nd Saturday of every month. Preview Every Monday - Friday 7am - 4pm Consignments Welcome Western Sales Management, Inc 1616 S 67th Ave. Phoenix, AZ 85043

623-936-3300 wsmauctioneers.com wsmauctionbiz@yahoo.com

Next Online Virtual Auction January 8, 2022

Page 44 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Junttan Unveils World’s First Electric Pile Driving Rig Junttan Oy is helping to ensure a sustainable future with the unveiling of the PMx2e, the world’s first fully batterypowered electric pile driving rig. The rig’s hydraulic system is controlled by a modern electric motor that generates power from a battery pack, which has replaced the counterweight. Junttan designed the PMx2e to mimic the use, efficiency and power of its diesel-powered PMx22 as closely as possible. The PMx2e offers the same robust structure and usability as the PMx22, but consumes less energy per pile, reduces noise, and delivers more power and instant torque, according to the company. Junttan’s PMx2e is equipped with two detachable 396 kWh battery packs to allow for 8 to 13 hours of continuous pile driving. An external quick charging unit allows the batteries to be fully charged overnight or during the day if needed. “This new electric pile driving rig demonstrates Junttan’s commitment to helping our customers build a more sustainable future around the world,” said Junttan Oy CEO Pasi Poranen. “After four years of research and develop-

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. JANUARY 2022 CRANE SAFETY COURSES January 3 – January 7, 2022 Mobile Crane Operator Training, Orlando, FL January 4 – January 7, 2022 Overhead Crane Inspector Training, Houston, TX January 4 – January 7, 2022 Mobile Crane Inspector Training, Cincinnati, OH January 10 – January 11, 2022 Qualified Signal Person Training, Orlando, FL January 10 – January 14, 2022 Mobile Crane Train the Trainer, Houston, TX January 11 – January 14, 2022 Overhead Crane Inspector Training, Cincinnati, OH January 12 – January 14, 2022 Qualified Rigger Level 2 Training, Orlando, FL January 17 – January 19, 2022 Rigging Inspector Training, Cincinnati, OH January 17 – January 20, 2022 Overhead Hoist Maintenance Training, Houston, TX January 19 – January 21, 2022 Aerial Work Platform Train the Trainer, Orlando, FL January 24 – January 25, 2022 Crane Assembly/Disassembly Director Training, Houston, TX January 25 – January 28, 2022 Overhead Crane Train the Trainer, Cincinnati, OH January 26 – January 27, 2022 Critical Lift Planning/Lift Director Training, Houston, TX January 27 – January 28, 2022 Forklift Operator/Inspector Training, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

Understanding the power of an alliance between manufacturer and end-user, Junttan and Aarsleff formed an alliance from day one known as “Junttan X Aarsleff.” Both had a shared vision of the future of driven piling. Junttan and Aarsleff saw an opportunity to write a new chapter in the playbook on sustainability. The companies combined their respective strengths and 119 years of combined expertise to improve sustainability without restrictions in performance or application. Junttan’s introduction of the world’s first electric pile driving rig will support Aarsleff’s mission to reduce the carbon dioxide emissions that originate from fossil fuels. “The biggest challenge to finding alternatives to diesel-powered machines is the lack of large, powerful electric construction equipment, but machine manufacturers are working hard to solve this,” said Lars Dithmer, head of sustainability at Per Aarsleff A/S. “The future is beginning to look brighter for more environmentally friendly construction sites.” For more information, visit www.junttan.com. 

Junttan designed the PMx2e to mimic the use, efficiency and power of its diesel-powered PMx22 as closely as possible.

ment, we are bringing a viable alternative to the diesel-powered deep foundation machine to the market. PMx2e will empower our clients by massively reducing their CO2 emissions and environmental footprint.”

The world’s first electric pile driving rig was commissioned in Sweden in late October 2021 by one of Europe’s premier contracting firms, Per Aarsleff, A/S and its Swedish subsidiary Aarsleff Ground Engineering AB.

ASSOCIATED GENERAL CONTRACTORS OF MINNESOTA (AGCMN) 2022 Minnesota Construction Summit Date: January 11-12, 2022 Location: St. Paul RiverCentre 175 Kellogg Blvd. West St. Paul, Minnesota Description: The 2022 Minnesota Construction Summit is the event of the year for the Minnesota construction industry! Featuring inspirational keynote presentations, educational sessions on topics that impact real life in our industry, exhibitors with relevant and vital products and services, and fantastic networking opportunities, this is an industry event not to be missed! Come and be a part of the 2022 Minnesota Construction Summit - Building Together Again. Registration is now open. Price: $200 For more information and to register, visit https://www.agcmn.org/events/constructionsummit./

machinery, access the newest training and techniques in concrete and masonry, and build momentum for another unstoppable year. EXHIBITS: Original equipment manufacturers from around the world and exclusive U.S. distributors of equipment, tools, products and services for the commercial construction, concrete and masonry industries. WOC attracts approximately 1,500 exhibiting companies and occupies more than 700,000 square feet of indoor and outdoor exhibit space. WHO ATTENDS WOC? More than 60,000 industry professionals from all around the world, representing all segments of the construction industry: Commercial Contractors, Concrete Contractors, Concrete Pumpers, Construction Managers, Dealers/Distributors, Decorative Concrete Contractors, Designers and Specifiers, General Contractors, Block/Segmental Unit Producers Masonry Contractors, Architects, Engineers, Block Producers, Ready Mix Producers, Rental Equipment Centers, Repair Contractors, Residential Contractors, Specialty Concrete Contractors, Precast, Pipe and Block Producers, Precast/Prestressed Producers, and more. Registration is now open! PLEASE BE ADVISED: You must register online prior to WOC 2022, as there will be NO onsite registration. Visit www.worldofconcrete.com for more information.

ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) 2022 AED Summit Dates: January 17-19, 2022 Location: Disney’s Coronado Springs Resort Orlando, Florida Description: The AED Summit is your annual opportunity to come together with professionals across the heavy equipment industry spectrum to improve yourself and your team and to build meaningful connections. Companies travel from all over the world to attend Summit; don’t miss your chance to meet with like-minded industry professionals! Registration is now open! Visit https://aednet.org/events/summit for more information. WORLD OF CONCRETE (WOC) World of Concrete 2022 Dates: January 18-20, 2022 (EXHIBITS) January 17-20, 2022 (EDUCATION) Location: Las Vegas Convention Center 3150 Paradise Road, Las Vegas, Nevada Description: When the world stopped, you kept going. Adapting. Giving a master class in resilience and being an essential worker. Now, celebrate how far you’ve come and discover the innovation helping our community evolve, endure, and thrive at WOC 2022. Part knowledge, part equipment, part connections—World of Concrete is 100% of what you need to keep grinding it out through disruptions to the supply chain, safety and beyond. Get your hands on advanced technology and

NATIONAL ASPHALT PAVEMENT ASSOCIATION (NAPA) 2022 NAPA Annual Meeting Dates: January 23-26, 2022 Location: The Phoenician 6000 E. Camelback Road, Scottsdale, AZ 85251 Description: The NAPA Annual Meeting is in person once again! Following a safe and successful Midyear Meeting, we invite you to join us for our 2022 Annual Meeting to participate in industry-wide networking, gain practical knowledge in asphalt pavement engineering and application, and steer the industry’s future. Open your world to: • 1,000 executives, engineers, estimators, advocacy proponents, business development gurus, health and safety professionals, and industry partners • 4 general sessions • 4 educational workshops • 4 networking opportunities • 1 awards program, celebrating the best in asphalt pavement • 1 exciting and beautiful destination • 1 day on the links Registration is now open!

Visit https://www.asphaltpavement.org/pavement for more information and registration. INDEPENDENT EQUIPMENT DEALERS ASSOCIATION (IEDA) 2022 Annual Meeting Dates: February 11–13, 2022 Location: Reunion Resort Kissimmee, FL Description: T'S OUR 20TH ANNIVERSARY SO WE'RE WHOOPING IT UP BIG! IEDA Is Growing – Which Means The 2022 Annual Meeting Will Be Exploding With The Best and The Brightest of the Industry More independent equipment companies than ever now recognize the stature IEDA membership brings to their reputation and the immense value membership pours into their daily business growth 52 weeks of the year. And when this booming group gathers in person for 60 supercharged hours, the collective, best-of-the-best brain power is electrifying. Registration is now open. For more information and to register, visit https://www.iedagroup.com/2022-annual-meeting/ NATIONAL PAVEMENT EXPO (NPE) 2022 National Pavement Expo & Conference Dates: February 23-26, 2022 (Conference) February 23-25, 2022 (Expo) Location: Charlotte Convention Center Charlotte, NC Description: National Pavement Expo brings vendors and contractors together who make their living from asphalt and concrete paving, sealcoating, striping, sweeping, crack repair, pavement repair, and snow removal to network with other paving professionals and attend industry workshops. In addition to hosting 200+ leading brands from the paving and pavement maintenance industry, National Pavement Expo delivers more than 50 conference sessions over a 4-day span. Whether you want to increase industry knowledge, sharpen your skills, improve efficiency, or learn about the latest and greatest products, you can do it all here! The program design of the conference allows ample opportunity to meet and network with leading contractors in the paving industry. Registration is now open. For more information and to register, visit https://nationalpavementexpo.com

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 45

Wind, Solar Construction Projects Thriving This Past Year

The IIJA extends DOE incentives for improvements to hydro facilities that increase its efficiency by at least 3 percent. Incentives for improvements to existing hydroelectric facilities that support capital improvements also are included. ENERGY from page 1

face of supply chain issues, materials costs and COVID-19 restrictions. According to MIT Technology Review, renewables will make up 95 percent of overall capacity growth in the power sector over the next five years. Demand for energy is growing in general, so fossil fuels cannot be counted out of the mix. “It still remains to be seen how quickly carbon-free sources will become the dominant source of electricity globally and begin rapidly supplanting coal, natural gas and other polluting sources,” according to MIT. The decline in electricity generation from coal has opened up opportunities for other power sources. BloombergNEF reports that solar, hydro and wind generation accounted for all the growth in power generation last year. This while coal, natural gas and nuclear output declined. Citing improved economics, increased national emissions reduction commitments and domestic policy, the IEA revised its renewables estimates for 2026 upward more than 40 percent higher than 2020 numbers. “China, Europe, the U.S. and India will account for nearly 80 percent of the added renewable capacity,” reported the IEA. To meet the global 2050 goal of a net-zero energy sector build, average annual renewables additions will need to double over the IEA’s five-year expectations. More aggressive climate policies and goals; cheaper carbon-free sources; and fast-happening technologies to balance out fluctuating renewables on the grid will all be necessary, said MIT. The industry must overcome several “policy uncertainties and implementation challenges,” noted the energy agency. Everything from permitting and financing to grid integration and social acceptance could create challenges. “Current increases in commodity prices have put upward pressure on investment costs, while the availability of raw materials and rising electricity prices in some markets pose additional challenges,” said the IEA, adding it expects those challenges will not be impossible to overcome. Feds Are Here to Help The Infrastructure Investment and Jobs Act (IIJA) includes major programs that bode well for construction contractors working in the energy sector, from support for electrification of the transportation system to building out the transmission grid and renewable power. “The IIJA creates major new investments programs,

The United States has experienced another banner year in wind and solar construction and the International Energy Agency forecasts a five-year boom in wind and solar, despite supply-chain issues, materials costs and COVID-19 restrictions.

touching nearly every aspect of the energy industry,” wrote Beveridge & Diamond environmental law firm. “Companies should pay close attention to these programs, both as a potential source of grants or other financial support, and for the systemic impacts programs of this size are likely to have on the industry.” Contractors should take notice, too. “The IIJA’s energy and climate-related provisions are numerous, and the details for implementation will be important going forward,” wrote the law firm in detailing those provisions. The bill appropriates $7.5 billion to support construction of electric vehicle charging infrastructure, hydrogen and natural gas fueling infrastructure and propane fueling infrastructure for medium- and heavy-duty trucks. The IIJA aims to address climate change by improving infrastructure resiliency or mitigating the adverse effects of climate change. The act promotes construction of new electric transmission and easing regulatory barriers to transmission development, earmarking $65 billion for these purposes. Specific provisions include a $5 billion grant program to support hardening the grid against extreme weather, wildfires and similar hazards. Grants may be used for a variety of measures, such as undergrounding or relocating electric lines and constructing microgrids and electricity storage systems. The legislation clarifies that federal disaster assistance can be used to fund repairs to wildfire-damaged electric systems and that repairs may include undergrounding or adding fireresistant equipment, according to Beveridge & Diamond. It also authorizes the construction of transmission facilities to increase the transfer of renewable power between Canada and the United States under the Columbia River Treaty. The IIJA includes a grant program to support utilization of captured carbon in new products, loan guarantees and grants to expand pipelines that transport captured carbon to sites where it can be utilized, a new program aimed at supporting large-scale commercialization of carbon capture technologies, and amendments to the permitting process for carbon sequestration projects. The legislation expands federal support for the use of hydrogen as an energy source, said Beveridge & Diamond. It also includes federal support for developing at least four clean hydrogen hubs that would promote new technology and commercialization of that technology. Hydroelectric power, chiefly the installation of new generation on existing dams or improving the safety and envi-

ronmental performance of existing dams, is included in the legislation. The new bill revives a DOE program that encourages new small hydro generation on existing dams and conduits such as irrigation canals. It includes the addition of new generators to an existing dam or conduit or the addition of a small generator to a FERC-licensed dams in areas that lacks grid access, has frequent outages or high electricity prices. The new bill extends an existing DOE program providing incentives for improvements to hydro facilities that increase their efficiency by at least 3 percent. Incentives for improvements to existing hydroelectric facilities that would support capital improvements also are included. Programs designed to reduce the economic effects of shuttered and abandoned fossil fuel facilities are a part of the IIJA. One specifically targets demonstration projects for construction of renewable energy facilities on abandoned mine sites. In addition to expanded energy construction included in the IIJA, President Biden’s proposed federal tax credits extension in the Build Back Better bill and national and corporate efforts to meet EU emissions targets are factors in the IEA forecast revision. The law firm of McDermott Will & Emery (MWE) noted that with the federal government’s procurement power the executive order to meet the 2050 carbon-neutral target could “transform clean energy markets while achieving ambitious climate goals.” Those goals include 100 percent carbon pollution-free electricity by 2030; zero-emission vehicle acquisitions by 2035; net zero emissions from federal procurement no later than 2050; and a similar building portfolio by 2045. “The executive order and the administration’s procurement plans are a potential bonanza for clean energy and electric vehicle companies,” said MWE. “The federal government buys $650 billion in goods and services annually in addition to a real estate portfolio of more than 300,000 buildings and a fleet of more than 600,000 cars and trucks.” To achieve the 100-percent carbon pollution-free electricity goal, MWE said the federal government will buy power directly from utilities, enter into power purchase agreements with generators and develop onsite generation on federal real property. “Meeting this goal will spur the development of more than 10 gigawatts of new clean electricity production by 2030.”  CEG

Page 46 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AMULET .....................................................................................32,34 ASAP EQUIPMENT .........................................................................11 ASTEC KPI-JCI ...............................................................................15 ASTEC/ROADTEC ..........................................................................21 AU EQUIPMENT LLC......................................................................19 BANDIT INDUSTRIES INC .............................................................19 BARGAINS ......................................................................................40 CEG SCALE MODELS....................................................................26 CONDUIT SEARCH GROUP............................................................9 CONSTRUCTION EQUIPMENT GUIDE ........................................41 DOOSAN PORTABLE POWER ......................................................37 ESCO CORP ...................................................................................33 FAE USA INC...................................................................................14 FELLING TRAILERS .......................................................................39 FISHER TOOLS ..............................................................................10 FLANGE LOCK................................................................................27 FLUID CONTROL SERVICES ........................................................28 GROVE WORLDWIDE....................................................................47 HENDRIX MACHINERY LLC ............................................................3 HYUNDAI CONSTRUCTION EQUIPMENT ..................................6,7 JJ SCHECKEL CORP .......................................................................5 KIRBY SMITH MACHINERY...........................................................48 KOBELCO CONSTRUCTION MACHINERY ............................28,29 KOMATSU AMERICA CORP ..........................................................20 LABOUNTY MANUFACTURING INC .............................................36 LINK-BELT EXCAVATORS.........................................................24,25 MB AMERICA INC ...........................................................................18 METSO OUTOTEC .........................................................................17 NORAM.......................................................................................22,23 ROAD BUILDERS MACHINERY & SUPPLY ...................................2 SANY AMERICA INC.......................................................................30 SCHAEFER ENTERPRISES ..........................................................34 SENNEBOGEN ...............................................................................16 SUMMIT SUPPLY GROUP .............................................................40 SUPERIOR EQUIPMENT ...............................................................40 TERAN INDUSTRIES INC ..............................................................35 WSM AUCTIONEERS ONLINE VIRTUAL AUCTION 1/8/2022..................................43

TEXAS SUPPLEMENT AIR COMPRESSOR SOLUTIONS INC..........................................24 BANE MACHINERY ........................................................................28 BEE EQUIPMENT SALES LTD ......................................................24 BOTTOMLINE EQUIPMENT LLC...................................................14 CLOSNER EQUIPMENT CO INC...................................................26 COMPACT CONSTRUCTION EQUIPMENT ................................21 CONSTRUCTION EQUIPMENT GUIDE ........................................27 GOMACO CORP.............................................................................17 GORILLA HAMMERS........................................................................1 HIGH TECH INDUSTRIES................................................................1 J & B PAVELKA INC........................................................................18 JCB INC .............................................................................................7 KIRBY-SMITH MACHINERY INC ..............................................15,19 MCCOURT EQUIPMENT INC ........................................................25 NED .................................................................................................22 NIECE EQUIPMENT .......................................................................13 NUECES POWER EQUIPMENT .................................................9,22 POWERSCREEN TEXAS ...............................................................11 ROMCO EQUIPMENT CO...........................................................2,26 SMH GROUP-US ............................................................................23 TROPHY TRACTOR .........................................................................3 VERMEER OF TEXAS-LOUISIANA .................................................5 WAUKESHA-PEARCE INDUSTRIES INC .....................................14 UTAH SUPPLEMENT CENTURY EQUIPMENT...................................................................5 CONSTRUCTION EQUIPMENT GUIDE ..........................................7 HOWE RENTAL & SALES ................................................................7 RASMUSSEN EQUIPMENT CO.......................................................3 UTAH TRACK AND WELDING .........................................................1 WHEELER CAT .................................................................................8

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 2, 2022 • Page 47

DELIVERIING PERF ORM MANCE AND VERSSATILITY T Reliability, value and indusstry-leading performance are yo ours with our comple ete portfolio of mobile m telescopiic cranes. Grove products are available in n:

> All-terrain models m with capacitie es from 50 t (55 USt) to t 450 t (550 USt) > Rough-terraain models with capacities from 30 t (30 USt) U to 150 t (165 USt) > Truck-moun 40 USt) to 100 t (115 USt) nted models with capacities from 36.3 t (4 > Telescoping crawler models with capacities from 30 t (30 USt) to 127 t (140 USt) > Industrial m o 22 t (25 USt) models with capacities from 8.1 t (9 USt) to

www.m manitowoc.com

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

www.kirby-smith.com Oklahoma City, OK 800-375-3339

Kansas City, KS 877-851-5729

McAlester, OK 918-310-1550

St. Louis, MO 866-279-1392

Tulsa, OK 800-375-3733

www.wpcrane.com 8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 1500 Madruga Road Lathrop, CA 95330 855-927-2637

19602 60th Avenue NE Arlington, WA 98223 253-254-7950

6720 Arctic Blvd. Anchorage, AK 99518 855-342-7263

91-210 Kalaeloa Blvd. Kapolei, HI 96707 808-682-7263

3521 Alken Street Bakersfield, CA 93308 855-927-2637

8912 NE Vancouver Way Portland, OR 97211 971-202-4002

Page 48 • January 2, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2017 Komatsu PC490LC-11 2015 Wirtgen WR200 XLI

2018 KOMATSU D61EXI-24 KM18431X 3,500 hrs.

KM17155M $239,500 3,189 hrs.

WR15021 $357,500 1,950 hrs.

2006 Komatsu WA200-5L

2017 Komatsu D85EX-18

2014 Komatsu D39PX-23

2012 Komatsu PC360LC10

KM06305U $61,500 8,343 hrs.

KM16523M $399,500 2,059 hrs.

KM14199X

$117,500 2,972 hrs.

KM12252D $118,500 6,700 hrs.

2016 KOMATSU WA270-7

2016 Komatsu PC240LC-11

2017 Deere 644K

KM16519X $157,500 3,383hrs.

$109,250 7,109 hrs.

2013 KOMATSU D65EX-17 2015 KOMATSU WA270-7

$249,500

KM13113X $129,150 5,669 hrs.

KM15353M $124,500 3,000 hrs.

KM16471M $107,500 2600 hrs.

2008 Caterpillar 963D

2018 Komatsu D65EX-18

2017 John Deere 310LEP

2014 LeeBoy 8510C

CT08803X $139,500 7,139 hrs.

KM18352X $209,500 3,600 hrs.

JD17004J $79,500 1,550 hrs.

LB14006X $79,500 2,219 hrs.

2015 Komatsu PC138USLC-10 KM15152X 4,400 hrs.

$109,500

JD17003X

2015 Komatsu HM400-5 KM15268M 10,500 hrs.

$459,500

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • McAlester • Odessa • Waco • Oklahoma City • St. Louis • Tulsa

Contact Terry Lyness for details and pricing.

877.549.7501