Texas 7, March 28, 2021 by Construction Equipment Guide

State Supplement sponsored by:

TEXAS STATE EDITION

A Supplement to:

SHIP WITHIN 48 HOURS SAME DAY PARTS AVAILABILITY

March 28 2021

24 HOUR TECHNICAL SUPPORT BACKED BY A 75 YEAR BUSINESS Thousands in Service!

Vol. VI • No. 7

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”

Affordable Price. Premium Service.

Your Texas Connection • Dennis Hogeboom • 1-877-877-4997 • dennishogeboom@cegltd.com

CALL 800-367-4937 *On approved credit • Financing Available

CONTRACTOR PROFILE: TCH DIRECTIONAL DRILLING

In one of the most competitive construction markets in the country, one contractor has separated itself from many of its competitors by way of diversification. TCH Directional Drilling of Friendswood, Texas, has seen improbable growth over the last

decade under the leadership of Colby Ellis, a second-generation contractor who saw potential in the directional drilling business. When Ellis joined his father Scott’s company straight out of high school in 2004, TCH was primarily involved in telecommu-

nications cable and innerduct installation for AT&T and at NASA facilities around Houston. The young man learned the ropes – as was expected – working cable jobs and whatever else was asked of him. see DRILLING page 6

Heavy Equipment Used and Rebuilt Parts Fast Shipping from Waco, Texas

We Have Parts For: Caterpillar • Komatsu • John Deere • Kobelco Hitachi • Hyundai • LinkBelt • Case

(254) 562-7500 • www.HighTech-parts.com

Page 2 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

HEAVY CONSTRUCTION EQUIPMENT EARTHMOVING, UTILITY, MATERIAL HANDLING, DEMOLITION, SCRAP & RECYCLING

CRUSHING, SCREENING, DRILLING & WASHING MOBILE & STATIONARY EQUIPMENT

Sales - Rentals - Parts - Service

214.819-4100/800.227-6626 www.romco.com

PAVING TEXAS CONCRETE & ASPHALT PAVING EQUIPMENT

YOUR HEAVY DUTY POWER ADVANTAGE COMPRESSORS, GENERATORS, PUMPS & LIGHT TOWERS ENGINE &

HAMMER

Sales - Rentals - Parts - Service

REBUILDS

214.819-4100/800.227-6626 www.romco.com

210.569-7068 / 800.966-4601 www.romco.com

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 3

Agricultural Tractors

Motor Graders

Water Equipment - Trucks

2015 JOHN DEERE 6215R ........................$109,500 (4) 2018/19 JOHN DEERE 6120M......From $77,500 2018 JOHN DEERE 5125R ............................$CALL (2) 2017 JOHN DEERE 5085M ......................$CALL

Dozers - Crawler

2018 CATERPILLAR 18M3 ........................$769,500 2014 CATERPILLAR 140M2 VHP ....................$Call 2014 DEERE 872GP ..................................$129,500

Artic Trucks

Off-Highway Trucks (4) 2009-2011 CATERPILLAR 785D..............$CALL (3) 1997/99 CATERPILLAR 777D ....From $139,500 (2) 1995 CATERPILLAR 777C ......................$CALL (2) 1991 CATERPILLAR 773B............From $59,500

2017 CATERPILLAR 773G ..............................$539,500 2013 CATERPILLAR 740B ..............................$329,500 2017 CATERPILLAR 725C2................................$CALL (5) 2014/15 CATERPILLAR 725C ....From $279,500 2019 FORD F750 ................................................$95,000 (2) 2007/15 FREIGHTLINER M2 ............From $49,500 (20) 2017-20 KENWORTH T370 ........From $89,500 (11) 2018/2020 PETERBILT 348 ......From $159,500 VOLVO A25D ..............................................$139,500

Ripper

Wheel Loaders

2017 CATERPILLAR D10T2, 3456 Hrs......$995,000 2011 CATERPILLAR D10T, 11,778 Hrs ....$575,000 1998 CATERPILLAR D10R ........................$110,000 (4) 1987-1991 CATERPILLAR D10N..From $77,500 2018 CATERPILLAR D9T ..........................$805,000 (2) 2019 CATERPILLAR 745................$465,000 Ea. (3) 2012/18 CATERPILLAR D8T ......From $209,500 (5) 2016-2019 CATERPILLAR 725C2 ........................ 2004 CATERPILLAR D8R II ......................$125,000 ..........................................................From $229,500 (5) 2019/20 CATERPILLAR D6 LGP From $425,000 (2) 2014/15 CATERPILLAR 725C ....From $197,500 (3) 2014/18-19 CATERPILLAR D6T XW .................... ..........................................................From $209,500 (2) 2018 CATERPILLAR D6T XL......From $329,500 CATERPILLAR 740 BED ................................$5,000 2015 CATERPILLAR D6N XL, 3235 Hrs....$164,500 2016 CATERPILLAR D6N LGP ..................$139,500 1996 CATERPILLAR 815F ..........................$95,000 2018 CATERPILLAR D6K2XL....................$185,000 (4) 2013-17 CATERPILLAR CS66B ..From $82,500 (8) 2013-19 CATERPILLAR CP56B ..From $79,500 (4) 2017/18 CATERPILLAR CS56B ..From $64,500 2001 CATERPILLAR 854G ........................$189,500 2015 CATERPILLAR 834K ........................$285,000

Attachments

Compactors - Padfoot/Smooth Drum

Dozers - Wheel

Crawler Carriers

2019 MOROOKA MST4000VD ..................$319,500 (2) 2018 MOROOKA MST3000VD ..From $229,500 (4) 2018/19 MOROOKA MST2200VD ........................ ..........................................................From $179,500 (5) 2019 MOROOKA MST1500VD ..From $159,500 2019 MOROOKA MST1500VDR ................$239,500 (2) MOROOKA MST660VD ..................$109,500 Ea.

Scrapers 1993 CATERPILLAR 637EII ......................$139,500 1980 CATERPILLAR 637D ..........................$59,500 2012 CATERPILLAR 627H ........................$459,500

Skid Steers - Track Excavators - Crawlers

2017 CAT 390FL ........................................$479,500 (2) 2017 CATERPILLAR 349FL........From $309,500 2014 CATERPILLAR 349EL ......................$169,500 2019 CATERPILLAR 336............................$289,500 2017 CATERPILLAR 336FL, 2941 Hrs ......$215,000 2014 CATERPILLAR 329EL, 4134 Hrs ......$159,500 (3) 2017-2019 CATERPILLAR 963K .......................... 2015 CATERPILLAR 323FL ......................$139,500 ..........................................................From $265,000 (2) 2018/19 CATERPILLAR 320 ......From $179,500

Crawler Loaders

CATERPILLAR D8SS ..................................$24,500

(3) 2020 CATERPILLAR 299D3 XPS ............$CALL (7) 2014-18 CATERPILLAR 299D2 XPS .................... ............................................................From $59,500 2016 CATERPILLAR 242D ..........................$39,500 2016 CATERPILLAR 236D ..........................$35,500 (2) 2021 JOHN DEERE 333G ........................$CALL

1991 CATERPILLAR 992C ............................$CALL 2019 CATERPILLAR 982M ........................$439,500 2019 CATERPILLAR 966M ........................$318,500 2018 CATERPILLAR 938M ........................$169,500

Winch PACCAR PA110VS245....................................$9,500

Miscelleneous Equipment 2019 ROME TRCW16....................................$56,500 2018 ROME TRCW12....................................$48,500 2019 ROME TACW16 ....................................$36,000 2018 ROME TCW28 ......................................$19,750 2018 ROME TCW32 ......................................$23,000 Authorized dealer for

Water Equipment - Tower/Tanks (2) 2020 KLEIN KPT-120 ........................$54,500 Ea.

Page 4 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

Houston’s 10-Year, $7B Project Put On Hold After Lawsuit HOUSTON (AP) A federal lawsuit was would displace families in more than 1,000 filed to stop a massive $7 billion highway homes and apartments along with 344 busiwidening project in Houston that local offi- nesses, two schools and five places of worship. cials and community advocates say won’t Many of the homes and businesses that improve the area’s traffic congestion and would be torn down to make way for the will disproportionately impact minority resi- expanded interstate are located in historicaldents who would be displaced by the pro- ly Black neighborhoods in Houston such as posed construction. Fifth Ward and Independence Heights that The lawsuit by Harris County (Houston) also have large Latino populations. comes as the Federal Highway Administration previously asked the Texas Department of Transportation to put the project on hold so the federal agency could review civil rights and environmental justice concerns that have been raised about the proThe proposed 10-year construction project would improve 24 mi. along posal. Interstate 45 and several other roadways, with a major remaking of how The proposed 10-year construction these thoroughfares go through downtown Houston. project would improve 24 mi. along Interstate 45 and several other roadbad for our health,” Hidalgo said. along with Houston Mayor Sylvester Turner ways, with a major remaking of how TxDOT Executive Director James and various community groups have said the these thoroughfares go through Bass said in a statement that his state transportation agency has failed to downtown Houston. The lawsuit by Harris County (Houston) comes as agency’s plans on working with offi- incorporate their various concerns into the TxDOT has said the proposal the Federal Highway Administration previously cials, residents and others on refining project’s final plans. would vastly improve a transportation asked the Texas Department of Transportation to the project “may now be in jeopardy “They are supposed to study and incorpocorridor that hasn’t changed in 50 put the project on hold so the federal agency could due to the lawsuit.” rate the feedback from the community years and would provide safer and review civil rights and environmental justice con“We look forward to discussing our before they bulldoze the community into a more efficient travel for area residents cerns that have been raised about the proposal. efforts to mitigate concerns about project that is not appropriate,” Hidalgo said. as well as accommodate the transition implementing the [project’s] vision In a statement issued on how it had comto electric and self-driving vehicles. The Sierra Club’s Houston chapter has for I-45,” Bass said. pleted the environmental review process and But Harris County Judge Lina Hidalgo called the project “a textbook case of enviThe state agency said it’s seeking clarity the project was cleared to proceed, TxDOT and other officials said the project prioritizes ronmental racism where all the environmen- from the Federal Highway Administration said it has made various commitments to offhighways over the ability of residents to get tal damages of ‘progress’ are dumped on the on “what a pause might mean as far as tim- set the concerns that have been raised over around, including through public transporta- poorest, highest-minority communities.” ing is concerned for future contract solicita- the relocation of residents, air quality, floodtion. They argued it would also exacerbate the “This project is bad for traffic. This proj- tion efforts.” ing issues, pedestrian safety and traffic noise. area’s pollution and flooding problems and ect displaces communities and the project is Hidalgo, the county’s top-elected official, 

Deutz Corporation to Add New Power Center Location Deutz Corporation has announced that it will be adding another Deutz Power Center location, this time in the DFW Texas area. The new location will be called Deutz Power Center Mid-America. “We’ve had tremendous success with Deutz Power Center Midwest in north Kansas City, Missouri,” said Dominick A. “Nick” Vermet, general manager of Deutz Power Centers. “The midsection of the country has been a booming area for us, with an economy that's spurring more construction and infrastructure projects. By adding this new Power Center location in DFW, we’ll be able to better support OEMs and end users in this large region by providing top-notch, expert service and parts delivery that keeps their equipment up and running.” Ron Schmidt, service manager of Deutz Power Center Great Lakes will be relocating to serve as the general manager of Deutz Power Center Mid-America. “We’ve been looking for just the right location so that we can officially open this new Deutz Power Center for busi-

ness,” Schmidt said. “I'm excited to take what I’ve learned as the service manager in the Great Lakes region and put it to work for the OEMs and customers we’ll serve from Deutz Power Center MidAmerica. I’ve experienced firsthand the difference that good aftermarket sales and support can make for businesses that depend on power equipment for their livelihoods, and that's what we'll provide from this new location. It's all about enhancing our customers' productivity and profitability.” Like its counterparts throughout the United States, Deutz Power Center Mid-America will have a fully stocked parts counter and provide regularly scheduled and emergency service of Deutz engines, either at the Power Center location or at the customer's site via remotely-located service technicians. Each remote technician, known as a “Man in Van,” is locally based in other cities, such as Houston and MidlandOdessa, allowing them to quickly and efficiently manage customer needs in those areas without extensive travel time.

Deutz Power Center Mid-America also will provide dedicated application engineering and technical sales resources for OEMs that utilize Deutz products in their equipment. Manufacturers can receive custom, value-added production and assembly services that result in the best possible Deutz solutions for their engine specification and configuration needs. Power Center customers also can purchase new Deutz engines, as well as Deutz Xchange remanufactured engines. For more information, visit www.Deutzsupport.com and www.Deutzamericas.com. About Deutz Corporation For more than 150 years, Deutz engines have supplied customized, cost-effective power to a broad array of machine types and market segments. The nine millionth Deutz engine was produced in 2015. From its headquarters in Norcross, Ga., Deutz Corporation, a subsidiary of Deutz Ag, supports a broad range of engines with capacities up to 620 kW that are used in construction equipment, agricultural machinery, material handling equipment, stationary equipment, commercial vehicles, rail vehicles and other applications. 

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 5

Page 6 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

TCH Directional Drilling Leans On Vermeer for Projects DRILLING from page 1

But his vision for the company extended beyond telecom projects. “I always had the desire to be in the pipeline business,” Ellis said, which led him to the decision to purchase the company’s first mid-size directional drill in 2008. “I saw so much potential for growth if we were able to diversify away from just cable work.” Houston, after all, was the epicenter of the pipeline industry in Texas, and horizontal directional drilling was becoming the preferred method of laying pipe in congested metro areas. It was widely accepted that in those areas open trenching was too risky and time consuming. Game Changer While Ellis learned and worked to build TCH’s directional drilling business, he was confronted with a challenge on the equipment side of the enterprise. “We were getting jobs around the state,” Ellis said, “but working with a different dealer for service and parts, depending on where we were, was problematic for us. There was no consistency on parts and service availability, and it was difficult to build relationships as we dealt with a different dealer in each part of the state.” By 2010, the company had several drills, but did not feel it had the “partner” it needed in an equipment supplier. In 2010, at about the time Ellis assumed more control of the business from his father, the decision was made to buy a Vermeer D24x40 drill, followed closely by the purchase of a D20x22, also from Vermeer. Both drills were built for congested urban job sites like those confronted by TCH in Houston, and were appropriate for small-diameter pipe work, but also for the cable jobs that still made up a large part of its business. The machines were right for TCH at the

“I always had the desire to be in the pipeline business. I saw so much potential for growth if we were able to diversify away from just cable work.”

Colby Ellis

TCH Directional Drilling

TCH’s business is made up of approximately 40 percent pipeline work and 40 percent commercial projects, like the Amazon distribution center job it recently completed in the Houston suburb of Richmond.

time, but so was Vermeer of TexasLouisiana’s footprint, which encompassed all of Texas. Working with a single company, regardless of the location of the job, would be a plus. “That was huge for us,” Ellis commented. “Vermeer has 13 branches to draw parts and service from. We work all over the state and

there is always a Vermeer branch nearby.” As the months and years went by, Ellis grew more confident in the Vermeer product and the dealer’s service. “The functionality of Vermeer’s different size rigs is so similar that very little retraining is needed,” Ellis said of the product line. “And their service is amazing. If we need

them on a Sunday morning, or whenever, they are there.” Having found the equipment teammate it was looking for, TCH stepped up to mid-size Vermeer drills with the purchase of a D100x120 in 2012 and its first D100x140 the following year. see DRILLING page 10

At the Amazon distribution center construction site in Richmond, Texas, workers from TCH Directional Drilling (R) feed conduit to a previously drilled horizontal utility hole as a Vermeer D24X40 pulls it all the way through on the other end.

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 7

WE FOCUS ON THE MACHINE SO Y YOU OU CAN WORK. O

Houston, TX 713-247-0066

Corpus Christi, TX

San Benito, TX

El Paso, TX

San Antonio, TX

361-289-0066

956-361-0066

915-541-0066

210-310-0066

Victoria, TX

Laredo, TX

Houston, TX

361-576-0066

956-725-0066

713-247-0066

CLOSE TO OUR CUSTOMERS

For your su uccess uccess. ROAD AND MINERAL TECHNOLOGIES. S. The WIRTGEN GROUP owes its strength to the excellence ence of its product brands – WIRTGEN, VÖGELE, HAMM and KLEEMANN – with their unique que wealth of experience. Put your trust in the WIRTGEN GROUP P.. Find out more: www.wirtgen-gr group.com/america

Corpus Christi, TX San Benito, TX

El Paso, TX

Corpus Christi, TX

San Benito, TX

El Paso, TX

San Antonio, TX

956-361-0066

915-541-0066

361-289-0066

956-361-0066

915-541-0066

210-310-0066

Victoria, TX

Laredo, TX

San Antonio, TX

Victoria, TX

Laredo, TX

Houston, TX

361-576-0066

956-725-0066

210-310-0066

361-576-0066

956-725-0066

713-247-0066

361-289-0066

Page 8 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

TxDOT Praises Contractors for Emergency Response By Irwin Rapoport CEG CORRESPONDENT

The snowstorms and cold weather that gripped Texas in February was not easy for the state, but the Texas Department of Transportation (TxDOT), along with contractors and subcontractors, worked overtime to keep the roads safe and protect motorists. Ryan LaFontaine, part of the TxDOT media relations team, described the situation that faced the Lone Star State and how it impacted road and bridge construction projects. “Parts of Texas saw record snowfall the week of February 15 as some areas got five to eight inches of snow,” he said. “Even parts of the Gulf Coast saw snow. Several parts of Texas saw their coldest temperatures in more than 30 years. Due to power outages, some TxDOT locations operated on backup generators. Work was temporarily halted on many construction projects across the state. ” LaFontaine noted that the delays would not seriously impact project benchmarks and delivery schedules. “Our construction schedules include allowances for weather impacts, so there should be no significant effects on the project schedules,” he said. The agency appreciated the help provide by general contractors and subcontractors in this emergency situation. “Contractors assisted TxDOT throughout this winter weather event,” said LaFontaine. “Their efforts have helped in numerous ways and it underscores the great working relationships TxDOT has with our contractors.” Kal Kincaid, president of the Associated General Contractors of Texas and president of Gulf Coast Construction Company, stressed the gravity of the unexpected and unusual cold weather. “The February winter storm was historic in nature as it produced weather advisories for all 254 Texas counties,” he said. “Most Texas communities lack the resources to deal with large snow accumulations, ice and sustained periods of sub-freezing tempera-

Crews from Eagle Barricade, based in McKinney, Texas, helped in the recovery effort.

tures. These conditions caused extreme hazards on our roads, highways and bridges. The Texas Department of Transportation, as it routinely does in extreme weather events, reached out to the Texas highway contractors for help.” Nor did TxDOT have to wait long for a positive response from the general contracting community. “Highway contractors and their crews quickly answered the call,” said Kincaid. “We supplied approximately 500 pieces of equipment and crews that, in most cases, worked around the clock to help TxDOT clear ice and snow from our highways and bridges. We have a strong working relationship with TxDOT and remain grateful that we can assistant anytime when called to ensure that our roads and bridges remain open and safe for the traveling public during bad weather. We remain focused on helping deliver a safe and efficient system 365 days of the year.” Dean Word, a past AGC of Texas President and a partner in the Dean Word Company based in New Braunfels, Texas,

personally got involved in the snow removal operations. “He had to climb into a motor grader to help clear ice and snow from Texas roads when one of his equipment operators encountered a situation that prevented him from answering the call,” said Gary Scharrer, Associated General Contractors of Texas. Word is well acquainted with New Braunfels-based Dean Word Co. utilized a 140G motor grader to help plow snow in highway infrastructure, with his Cat hard-hit areas of Texas. 120-year-old company founded by his great grandfather and his father being weather events, including hurricanes and a state and national president of the snow and ice.” It was an all-hands-on-deck situation to Associated General Contractors. As the stormy weather was approaching, help with snow removal efforts and to clear TxDOT was able to coordinate with general debris off the roads. “The Texas Forest Service, construction contractors to shut down their projects to open as much road space as possible for contractors and crews from local counties motorists, TxDOT personnel and snow worked together and provided assistance,” said LaFontaine. “Many contractors, counremoval crews and emergency vehicles. “We did coordinate with contractors ties, other agencies and our own resources across the state and began securing work helped us to clear the roads in a reasonable zones prior to the storm’s arrival,” he said. amount of time. Safety is always TxDOT’s “This is a standard procedure used for number one goal.”  CEG

This is what many Texas highways looked like after the snowstorm in February.

Crews from Drewery Construction, based in Nacogdoches, Texas, helped clear snow off highways.

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 9

High productivity - Low maintenance Cedarapids CRH1111R Portable Closed Circuit Impactor/Screen Plant features the TI4143 impact crusher and a 5x16 2-deck inclined screen. With its large screen, wide conveyors, and low maintenance electric driven components, this is a highly productive, high value plant. *optional 20 foot feeder

Crushing•Screening•Conveying•Washing•Recycling•Grinding Systems

Cedarapids CRH1113R Portable Closed Circuit Impactor/Screen Plant features the TI4250 impact crusher and a 6x16 2-deck inclined screen. The crusher is hydraulic clutch driven. All other components are electric driven from the 150kw generator. This one piece towable machine is a great value for processing shot rock as well as concrete and asphalt recycle materials.

SERVING TEXAS, OKLAHOMA, ARKANSAS & LOUISIANA 5680 West State Hwy 71, La Grange, TX 78945 • 800-255-8628 • www.powerscreentx.com

Page 10 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

Contractor’s Growth Spurs New Friendswood Facility DRILLING from page 6

The company’s fleet now includes 12 Vermeer horizontal directional drills, ranging in size from the D10x15 to the D220x300. TCH’s partnership with Vermeer goes beyond equipment, though, according to Ellis. Mark Foulon, a regional manager of Vermeer Texas-Louisiana, has become a valuable asset to TCH. “We can call Mark whenever,” Ellis said. “What makes him so valuable though is that he knows all aspects of the business. He started in the parts department at Vermeer and that really helps him on the sales end. He really knows the equipment and makes a point of understanding our needs.” Growth Spurt By 2015, TCH employed about 75 people and was positioned for growth after huge investments in both people and machines. “I have always strived for steady, sustainable growth,” Ellis said, “but we really began to hit on all cylinders in 2015. It was the diversification that put us in that position.” Today, TCH’s business is made up of approximately 40 percent pipeline work and 40 percent commercial projects, like the Amazon distribution center job it recently completed in the Houston suburb of Richmond. The remaining 20 percent is municipal work, according to Ellis.

The new yard was expanded from 1 acre to more than 4 acres. The shop is approximately 12,000 sq. ft. and the offices nearly tripled in size to 8,000 sq. ft.

“Our new facility is all about operations. We have more yard space and more shop space, but also a very professional feel.”

Colby Ellis

TCH Directional Drilling

He was quick to point out though, that “from the equipment standpoint, I’m most invested in pipeline work.” New Digs The five-year growth spurt that began in 2015 resulted in the company outgrowing both its offices and its yard. “For a while we added trailers for additional office space, but we eventually outgrew those too,” Ellis said. Its new space in Friendswood, on the south side of Houston, more resembles offices of an engineering firm than a drilling contractor. “Our new facility is all about operations,”

Ellis explained. “We have more yard space and more shop space, but also a very professional feel. My wife Kelley was very instrumental in the overall final look.” The yard was expanded from 1 acre to more than 4 acres. The shop is approximately 12,000 sq. ft. and the offices nearly tripled in size to 8,000 sq. ft. A surprisingly large amount of office space is devoted to what Ellis calls the TCH Safety Team. “There are a lot of ways to get hurt in this business,” “After all, safety is absolutely our number one priority,” he pointed out. In recent years, TCH has completed as many as 200 jobs per year, and Ellis sees continued growth on the horizon.

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 11

B O B C AT. C O M

Meet the new Bobcat® R-Series. Completely re-designed from the inside out for tough work in tough conditions. They work harder, faster and are more reliable to help you complete bigger jobs and do more with one machine. Come by your local Bobcat dealership to get the equipment, service and support you deserve. Bobcat of Abilene 325-673-7361 Bobcat of Amarillo 806-622-9593 Bobcat of Austin 512-251-3415

Bobcat of Corpus Christi 361-884-3959

Bobcat of Midland–Odessa 432-685-9298

Bobcat of the Rio Grande Valley 956-425-4300

Bobcat of Waco Elm Mott 254-666-1669

Bobcat of Lubbock 806-745-1322

Bobcat of San Antonio 210-337-6136

Bobcat of Victoria 361-579-0922

Ranchers ATV and Tractor Kerrville 830-315-2330

BobcatCCE.com

Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2020 Bobcat Company. All rights reserved. 12252280

www.bobcat.com

Page 12 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

Lone Star State Construction Projects Austin markings.

U.S. 79: I-35 to East of FM 1460 TxDOT's Austin district is proposing improvements to the U.S. 79 Project, from I-35 to east of FM 1460 (A.W. Grimes) in the city of Round Rock, Williamson County, Texas. The purpose of the project is to improve safety and mobility and accommodate future population growth and land use development in the area. The proposed project includes the following improvements: • Widening the existing U.S. 79 roadway to add a third travel lane in each direction; • Installing a raised median for safety; • Constructing an underpass at the intersection of U.S. 79 and Mays Street, an overpass at the intersection of U.S. 79 and FM 1460 and altering the U.S. 79/I-35 intersection; • Modifying driveways and access points to improve safety and traffic flow; • Installing shared-use paths on both sides of U.S. 79 to provide improved pedestrian and bicycle accommodations.

SH 21: CR 130 to Paint Creek Road TxDOT is developing preliminary plans to expand SH 21 from County Road (CR) 130 to Paint Creek Road in Bastrop County, Texas. SH 21 in eastern Bastrop County functions as both a local thoroughfare and commuter highway. Along the project limits, the existing highway is an undivided highway with alternate passing lanes and includes areas where the roadway is reduced to two lanes southbound and one lane northbound. The preliminary plans would expand the roadway from a four-lane undivided to a fourlane divided. Bastrop County’s rapid growth has increased the need for accommodating projected traffic volumes, improving safety and reducing congestion. Proposed improvements include: • Widening the roadway to create a four-lane divided roadway (two lanes in each direction); • Separating travel lanes by adding a median with crossovers at regular intervals; • Designing the roadway to include 12-ft. lanes, 10-ft. outside shoulders and a 4-ft. inside shoulder; • Constructing two new twin bridges over U.S. 290 along a new alignment.

Dallas markings. Irving Interchange The $301 million Irving Interchange project will include the reconstruction of interchanges at SH 183, SH 114, Loop 12 and Spur 482. Loop 12 will be reconstructed and widened from six to eight lanes for a length of 1.2 mi. that begins on the south end of Union Bower Road to the north of Texas Plaza Drive. The project will also include the widening of SH 114 from Loop 12 to SH 183 and Spur 482 with direct connectors. Spur 482 will be reconstructed from west of Century Center Boulevard to the interchange and will tie into SH 183 with direct connectors. This is a Texas Clear Lanes project. The overall length of the project is about 9.6 mi. including bridges and direct connectors.

Current construction avtivities include: • Several bridges over Loop 12, SH 183 and Spur 482 are currently under construction; • Detour pavement and excavation/embankment construction is ongoing along Loop 12; • Retaining wall construction continues along SH 114 and Spur 482; • Installation of drainage structures – inlets, manholes, pipes and culverts continues along Loop 12, Spur 482 and SH 183; • Roadway subgrade activity continues along SPUR 482 under SH 114; • Installation of temporary ITS (Intelligent Traffic Systems) throughout the project is ongoing; • City of Irving waterline and waste waterline work continues on northbound Loop 12 as well as westbound Spur 482.

Fortmarkings. Worth SH 26 Colleyville The SH 26 Phase II reconstruction project in Colleyville from John McCain Road to Brown Trail began in 2016. The 4-mi. TxDOT project will widen the roadway to three lanes in each direction and includes raised curb medians to enhance safety. The $38 million project reached substantial completion in November 2020. The SH 26 Phase I reconstruction in Colleyville from Brumlow Avenue/Pool Road to John McCain Road reached final completion in early 2016. The $11.4 million SH 26 Phase I project widened the roadway to three lanes in each direction with raised curb medians and left-turn bays. The SH 26 project from Interstate 820 to Brown Trail in North Richland Hills and Hurst is in development and is currently unfunded.

I-35W I-35W is a north-south corridor through Fort Worth, Haslet and Burleson. At its apex in downtown Fort Worth, it carries more than 165,000 vehicles per day. A major national trade corridor, the interstate has daily truck volumes averaging 11 percent. Multiple expansion projects are either planned or underway to improve safety and mobility along 26 mi. of I-35W in Tarrant County. TxDOT has environmentally cleared I-35W from I-30 to Eagle Parkway to ultimately widen the corridor up to eight mainlanes plus up to six TEXpress Lanes for future traffic volumes. Construction began in September 2020 on the secondphase of I-35W from U.S. 81/287 to Eagle Parkway. The public-private project will rebuild 6.7 mi. of I-35W and add four TEXpress Lanes, auxiliary lanes and some frontage roads. Anticipated substantial completion is late 2023.

SH 199 Project TxDOT is developing a 17-mi. section of the State Highway 199 corridor in Tarrant County from Western Center Boulevard to White Settlement Road. The corridor will be addressed through the construction of four projects within the 17-mi. section. The total construction cost for the corridor is approximately $580 million. Currently, one project is complete, one project is under construction and the other two projects are under development.

Houston FM 523 from SH 332 to FM 1495 The Texas Department of Transportation (TxDOT) is proposing to reconstruct and widen FM 523 from SH 332 to FM 1495 in Brazoria County, Texas. The proposed project is expected to improve traffic congestion, roadway deficiencies and safety, as well as accommodate the truck traffic accessing the Port of Freeport and industrial facilities in the surrounding area. Currently, FM 523 consists of two 11-ft.-wide travel lanes with a continuous 14-ft. left-turn lane with variable shoulder widths. The existing right-of-way varies between 120 to 200 ft. wide, with the widest areas occurring at the end of the project (FM 1495). Proposed improvements include • Widening FM 523 from a two-lane to a four-lane roadway; • Four 12-ft.-wide travel lanes, a continuous 16-ft.-wide turn lane and 10-ft.-wide shoulders • Addition of a 12-ft. turn lane to FM 1495.

FM 646 from I-45 to Bayshore Boulevard The scope of this study is 6.5 mi. of Farm-to-Market (FM) 646 from Interstate Highway (IH) 45 to Bayshore Boulevard in Dickinson. The FM 646 project received environmental clearance in May 2011. The approved project included widening FM 646 from two to four lanes, constructing a raised median, sidewalks and curb-and-gutter drainage from I-45 to Bayshore Boulevard, a total distance of approximately 9 mi. This project is in Galveston County, Texas Proposed improvements include: • Add one travel lane in each direction; • Increase the shoulder width from a varying 7 to 10 ft. to a uniform 12 ft.; • Construct a 16-ft. raised center median; • Construct an overpass at the Union Pacific railroad, with the current at-grade crossing remaining to maintain access to adjacent properties; • Convert the existing open ditch to curb-and-gutter (in some sections).

San Antonio FM 471 from SH 211 to Old FM 471 The Texas Department of Transportation is proposing improvements to FM 471, from SH 211 to Old FM 471, in Bexar, and Medina County, Texas. The proposed project would expand the existing FM 471 (Culebra Road) from SH 211 to Old FM 471 from a two-lane undivided roadway to a four-lane divided roadway with turn lanes and raised medians, a total distance of approximately 3 mi. The proposed improvements would include drainage improvements, bicycle and pedestrian accommodations and an overpass at SH 211 over FM 471, to connect existing SH 211 north of FM 471 to the proposed SH 211 extension south of FM 471 (project managed by Bexar County). The proposed FM 471 typical section would consist of four 11- and 12-ft. travel lanes (two in each direction), a 16-ft. median, 5-ft.-wide dedicated bike lanes, and 6-ft-wide sidewalks within a right-of-way (ROW) of 120 ft. on FM 471. The purpose of the proposed project is to improve mobility, reduce traffic delays and improve safety conditions along the corridor. 

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 13

Page 14 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

Quarry Boosts Contractor’s Production With Loader Tech Since 2017, Central Texas Stone and Aggregate LLC has been on a mission to increase its production of rock and aggregate to support construction jobs throughout central and southern Texas under the guidance of General Manager Cole Bland. Bland recalls that just three years ago, approximately 70 percent of the quarry materials were used by the family-owned construction business, Joe Bland Construction L.P. “The other 30 percent was sold to other construction companies. I believed we were missing out on a huge opportunity to increase our material capacity and build our customer base,” he said. Bland set out to double the quarry production from its current 600,000 tons and introduce operational efficiencies with help from modern equipment and advanced technology. Material Demand Central Texas Stone and Aggregate quarry crews relied on one wheel loader to load customer trucks and another loader to feed the crusher. The quarry was operating much the same as it had since the 1990s — one shift, 200 to 250 tons an hour, producing about 600,000 tons annually. In 2018, under Bland’s expansion plan, the company needed a second wheel loader to keep up with demand. Bland called the president of Venture Drilling Supply, Colt McCarthy, about ways to increase productivity. McCarthy recommended a Doosan DL550-5 wheel loader with a 7.5-cu. yd. bucket capacity. The DL550-5 is a workhorse with impressive power, tipping capacity and breakout force. It’s uniquely well suited to material handling in quarries such as Central Texas Stone and Aggregate. Venture Drilling Supply also was able to customize the DL550-5 loader by pairing it with a larger bucket and counterweights. That adjustment allowed the quarry crew to fill trucks with 20-plus tons of gravel in just two passes. Increased sales of materials placed more stress on wheel loader operators to load trucks with speed and accuracy. Payload Precision In 2019, Central Texas Stone and Aggregate averaged about 190 trucks per day. On its busiest days, there were 50 to 60 trucks and trailers waiting in line for materials — and the pressure on the wheel loader operator is huge. “Not all haul capacities are the same,” Bland said. “Typically, wheel loader operators visually estimate the total based on scoop counts. But not all trucks and trailers are the same size.”

The DL550-5 is uniquely well suited to material handling in quarries such as Central Texas Stone and Aggregate.

Two similar-looking trucks could have different capacities because of different addons and trimming. One could be 18 tons and the other 16 tons while trailers can range from 21 to 24 tons. “If the truck is sold by the load, drivers might not be too picky if weight is a little more or less than, say, 23 tons,” Bland said. “But some drivers are paid by weight. So when a truck is under- or overloaded, the driver has to return to the pit to adjust the load appropriately. When there are 50 to 60 trucks in line, chaos quickly ensues.” Looking to improve accuracy and reduce the chance of over/under weights, Bland once again called McCarthy, to talk about a technology that he had seen at a recent aggregates conference. Specifically, he wanted to know more about the Trimble LOADRITE L3180 SmartScale for wheel loaders. The Trimble LOADRITE L3180 SmartScale is offered as an option by Doosan through its dealers such as McCarthy’s Venture Drilling. The L3180 SmartScale is an onboard weighing system designed to optimize loadout, track productivity and prevent overloading. It measures load weight lifted by the wheel loader bucket using multi-axis inertial measurement unit (IMU) sensors, transducers, Wi-Fi and GPS. The sensors and hydraulic pressure transducers are installed on the loader’s lifting arm mechanism of the

bucket and send information to the LOADRITE indicator in the cab, which converts the data to a digital weight reading. The operator has instant evidence that his estimates are close. In the cab, the operator can see production metrics using a 5.7-inch color touch screen. An added bonus is that an eTicket feature sends load tickets via The L3180 SmartScale is an onboard weighing system designed to optimize loadout, track productivity and prevent overloading.

email to drivers. The system is able to deliver precise data — even in rough terrain — technique and machine movement using proprietary weighing techniques. “It took a day or so to install and calibrate the SmartScale on the Doosan loader and we were ready to go,” Bland said. “Our lead loader operator loves the system. It’s given him greater confidence that he’s loading trucks with accuracy and speed — regardless of truck bed size or material.” Scaled to Efficiency Since implementing the SmartScale, the team at Central Texas Stone and Aggregate has cut over/under loads from 8 in 100 to fewer than 1 in 100. Bland said he’s seeing many benefits from

the technology. “On a busy day, having trucks returning to the pile to adjust loads is costly in both time and customer satisfaction,” he said. “Without the SmartScale, it could potentially cost me hundreds of dollars a day in time and fuel. With this new system, our customers are much happier with the efficiency that we can get them loaded and on the road to their jobs.” The L3180 has also provided some checks and balances to the quarry operations. Bland said that one day recently, his crew was getting fluctuating weights on its truck scale compared to the SmartScale weights. “When we checked the truck scale versus the weight shown on the SmartScale, we confirmed there was an issue with the truck scale,” Bland said. “After more investigation, we found a hydraulic leak.” The Central Texas Stone and Aggregate quarry continues to grow, adding another 250-plus acres in 2019. The total quarry is more than 500 acres. In 2019, the quarry produced 1.3 million tons operating at 350 tons per hour. “Higher production and technology have helped us expand our customer base and be more competitive, which was exactly the goal we were hoping to achieve,” Bland said. “I strongly believe that quarry owners would benefit greatly by utilizing the SmartScale for loading trucks. It gives loader operators confidence, minimizes customer turnaround time and drives productivity.” Investing in technology significantly increased Central Texas Stone and Aggregate’s productivity. See the company’s Doosan wheel loader at work: na.DoosanEquipment.com/CentralTexas.  (This story was reprinted with permission from Doosan’s DoMore Magazine, Winter 2021 Issue.)

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 15

NPT1200

Niece Water Towers deliver reliability and durability when you need fast mobile water service. With a 12” discharge tube it fills your tanks at a rate of over 1,000 gallons per minute. Offers removable power pack for security, fifth wheel tow hitch, professionally engineered and constructed. It features (8) legs for stability . 5th wheel set up for quick “tow and go.”

FUEL AND LUBE TRUCKS

OFF ROAD WATER TRUCKS OVER THE ROAD WATER TRUCKS

FUELER TRUCKS

Page 16 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

K-Tec Earthmovers builds industry leading scrapers and accessories for construction and mining sites around the world. At K-Tec™ we ensure you get the best return for your investment. Use our cost analysis tool to see for yourself at ktec.com. Gain a Massive Advantage by incorporating K-Tec™ equipment on your jobsite.

www.ktec.com Austin, TX (512) 388-2529

Carmine, TX (979) 278-3570

Toll Free: 1-866-496-7561

Fort Worth, TX (817) 626-2288

Longview, TX (903) 758-5576

San Antonio, TX (210) 648-4600

Buffalo, TX (903) 322-5602

Corpus Christi, TX (361) 881-4891

Carrollton, TX (214) 819-4100

Houston, TX (713) 937-3005

Mercedes, TX (956) 565-0100

www.romco.com

French Firm Agrees to Buy ASCO, Case Launch ReNew Three Texas Solar Projects Centers in Dallas-Fort Worth France’s oil and gas supermajor, Total, is buying four large-scale solar power projects plus battery storage assets in Texas, with which it plans to meet the electricity demand of all its industrial sites in the United States, including the Port Arthur refining and petrochemicals platform and La Porte and Carville petrochemical sites. The French oil major, which has been boosting its renewable electricity portfolio and has been signing lots of power purchase agreements [PPAs] for green energy in recent months, is buying the four solar projects for a total of 2.2 gigawatts [GW] plus 600 MW of battery storage assets from SunChase Power and private energy investment firm MAP RE/ES. All projects, each with co-located battery energy storage systems [BESS], are in industrial areas near Houston with high electricity demand and are expected to come online between 2023 and 2024, Total said in a statement. The oil major will commit to a 1-GW corporate PPA sourced from this solar power and energy storage portfolio to cover all the electricity consumption of its operated industrial sites in the United States, including those

in Port Arthur, La Porte and Carville, Texas. “With this latest acquisition, Total is now developing close to 4 GW of renewable power capacity in the U.S., thus contributing to our objective to reach close to 35 GW of renewable generation capacity by 2025,” Total’s Chairman and Chief Executive Patrick Pouyanné said in a statement. At the end of 2020, Total’s gross power generation capacity worldwide was approximately 12 GW, including nearly 7 GW of renewable energy. Total was the second-largest corporate buyer of clean energy globally in 2020, after Amazon, research by BloombergNEF [BNEF] showed in January. Total signed 3 GW of PPAs last year. Total has acquired the largest renewable energy portfolio among European oil supermajors since Big Oil started announcing last year net-zero targets and pledging significantly increased investments in renewables, according to Bloomberg data. Since announcing its new strategy and net-zero goals in September 2020, Total has bought as much as 8.8 GW of renewable electricity capacity, either operational or in construction or development phases. 

Case Construction Equipment and Associated Supply Company Inc. (ASCO) and have launched one of the first Case ReNew Centers at the dealer’s Dallas-Fort Worth location (Euless). The Case ReNew Center will inspect, service and recondition Case lease returns and/or other used Case equipment which will then be sold through Case dealers in highly populated equipment markets. Case ReNew Centers also feature the highest level of certified technicians in the network and will offer reconditioning services for used equipment — Case as well as other brands. “This partnership with ASCO is among the first of several Case ReNew Centers that will appear in high-volume used equipment markets across the U.S. and Canada,” said Terry Dolan, head of Case Construction Equipment — North America. “We’re offering equipment buyers a range of used equipment reconditioning services and purchase price points to best fit their needs and investment strategies. Equipment buyers can also have faith that ReNew badged used equipment has been properly cared for, inspected and serviced compared to equipment purchased in private sales.” Case now offers three levels of used

equipment: • Standard: Basic sale/trade-in (includes all competitive equipment). This category is ideal for price-driven buyers who prefer ‘as-is’ transactions and repairing their own equipment. • Case ReNew: Case used or lease return equipment — all product lines — that has been serviced and repaired to retailready condition, functionality and performance. It has also been inspected by a Casecertified technician. • Case Certified Used (where available): Certified Used equipment undergoes a 100+ point inspection, including extensive fluid testing and repair by a Level 2 Casecertified technician, use of Case Genuine or REMAN Parts, and features an extended warranty and competitive financing. Case Certified Used equipment availability varies by dealer and currently includes only Case skid steers and compact track loaders. The program is slated to expand to other product lines in 2021. “As service is paramount for our family of dealerships, we have invested in hiring and training Case-certified technicians to staff the new Case ReNew Center immediately,” said Brax Wright, CEO of ASCO. 

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 17

Page 18 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

Bigge Opens in Gulf Coast After five years of searching, acquiring, designing and building, Bigge Crane and Rigging Co. has announced the grand opening of its new Gulf Coast facility with a 130,000-sq.-ft. shop set on 25 acres in Houston, Texas.

Located at 8300 McHard Rd., this crane maintenance facility boasts features including: • 130,000-sq.-ft. shop set on 25 acres; • 12 overhead cranes, ranging from 10 to 30 tons; • 35 high-tech workstation bays; • 20,000 sq. ft. of sandblasting and painting space;

• 10,000 sq. ft. of newly renovated office space. For more than 100 years, Bigge has been committed to providing customers with exceptional value and the highest quality crane service by investing in its people, the Perfect Fleet, maintenance facilities and implementing innovative technology, according to the company. These investments sustain Bigge’s time-honored tradition. “You can’t maintain the Perfect Fleet without the perfect facility,” said Bigge Crane President and CEO Weston Settlemier. “For 105 years, Bigge has continually reinvested into the business, and our latest investment into this Gulf Coast crane facility is yet another example of our commitment to providing the best service level in the industry.” This facility will help Bigge continue to attract industry talent to maintain its fleet and support its customers. Customers can request a private tour of the new facility through the contact form on the company’s website. For more information, visit www.bigge.com. 

Atlas Helps Texas Water Relief Effort

Houston, TX 713-247-0066

San Antonio, TX 210-310-0066

www.nuecespower.com

Atlas Copco USA’s employee-driven Water for All program, in partnership with Can’d Aid, has announced it will provide support to the state of Texas with fresh, clean drinking water. This support responds to the recent ice and snowstorms causing widespread power outages, resulting in resident’s inability to obtain heat, water, food and medicine. Can’d Aid will use the $13,000 Atlas Copco donation to send 50,400 cans to Texans in need within the Houston and Austin areas. The truckload of cans will support nearly 8,400 individuals or approximately 2,100 families. “We have hundreds of colleagues, their families, and multiple locations across Texas,” said Aaron Prato, vice president of Atlas Copco North America LLC. “We see the devastation, and our hearts go out to everybody affected. This is just one way we will play a part in the work to get the area back on its feet.” Through the dedicated and passionate work of Atlas Copco volunteers, Water for All funds projects worldwide, providing access to clean drinking water, sanitation and hygiene. For every dollar an employee donates, the company adds another two dollars, making a double match. Since 2010, Atlas Copco USA has donated nearly 2 million dollars to clean-water drinking projects, including three projects directly related to Covid-19 emergency relief in the United States. For more information on the Atlas Copco Water for All community initiative, visit https://www.atlascopcogroup.com/ en/about-us/water-for-all. 

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 19

Kirby-Smith Machinery has one of the largest and most diverse rental fleets in the region. UÊ >À}iÊ iiÌÊ vÊVÕÀÀi ÌÊ `i ÊiµÕ « i Ì UÊ,i Ì> ÃÊ>Û> >L iÊLÞÊÌ iÊÜii ]Ê Ì Ê ÀÊ }iÀ UÊ ÜÊÜii ÞÊ> `Ê Ì ÞÊÀ>ÌiÃ

UÊ6>À iÌÞÊ vÊ «Ì Ã\Ê,i Ì]Ê,i ÌÊÌ Ê*ÕÀV >Ãi]Ê ÕÞÊ ÀÊ i>Ãi UÊ ÜÊw > ViÊÀ>ÌiÃÊ>Û> >L iÊÜ Ì Ê >ÌÃÕÊ > V > UÊ iÜÊ> `Ê1Ãi`ÊiµÕ « i ÌÊv ÀÊÃ> i Follow us on

www.kirby-smith.com

888.861.0219

Abilene

Amarillo

Dallas

Ft. Worth

Lubbock

Odessa

325.692.6334

806.373.2826

214.371.7777

817.378.0600

806.745.2112

432.333.7000 Follow us

Waco

Oklahoma City

Tulsa

McAlester

Kansas City

St. Louis

254.261.1370

405.495.7820

918.438.1700

918.310.1550

913.850.6300

314.729.0125

South Texas’ one stop truck and trailer source!

Page 20 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

Used Truck & New/Used Trailer Sales/Parts/Service

Trailer Service (Light up to Heavy duty) Truck Maintenance (Medium & Heavy Duty)

Laser alignments on truck and trailers (unlimited axles) Texas DOT inspection station Our New Location in...

Robstown, TX

Robstown 3205 Highway 44 Robstown,TX 78380

361-387-5010 Houston 11113 Wallisville RD Houston,TX 77013

713-670-0733 www.jbpavelkainc.com

Full rigging shop Full fabrication shop

Reflooring Truck frame modifications

Tarp system repair/installation Field Service

Conversions Custom builds

BigShots Golf Begins Its Construction of Bryan Facility BigShots Golf, ClubCorp’s tech-driven entertainment and culinary experience offering fun for all ages and skill levels, puts its brand growth into overdrive in 2021 beginning with the start of construction at its Bryan, Texas, location. And BigShots Golf franchisee O’Reilly Hospitality Management is slated to open its Fort Worth, Texas, location this spring. By the end of 2021, the company will have four venues open, including the original location in Vero Beach, Fla. “We see 2021 as the year we'll begin real-

izing our vision for expanding the ClubCorp brand with BigShots Golf,” said ClubCorp CEO David Pillsbury. “Using our extensive expertise as the largest owner-operators of some of the world's most extraordinary golf courses and clubs, we will bring the sport to families and “We see 2021 as the year we’ll begin realizing our children through an elevated vision for expanding the ClubCorp brand with ‘eatertainment’ experience BigShots Golf,” said ClubCorp CEO David Pillsbury. that is unlike any other.

BigShots Golf is also a great way to introduce newcomers to the game in a fun, casual experience.” BigShots Golf features game bays where novice players, families and children can play interactive games such as Knockout and Pinball. In addition, avid golfers can play full rounds on virtual golf courses from all over the world, with Doppler radar technology providing data on swing, speed and distance to give a more authentic golfing experience. In addition to golfing bays, BigShots Golf

will include a private event space, an outdoor patio with fire pits, yard games, mini golf and kids’ activity areas. A key element of the brand is its next-level dining. Each venue will feature a full scratch kitchen serving bold and unexpected menu items, such as the PB & Jam Burger, plus sports bars that offer signature cocktails and local craft beers. The company is teaming with local investors to bring its brand of “eatertainment” to each community. In Bryan, it partnered with local residents Jim and Allyson Butler to help bring the 40,000-sq.-ft. entertainment venue to the city's new Travis Bryan Midtown Park, just minutes away from Texas A&M University. BigShots Golf Aggieland is just the beginning, as the company continues to plan future locations and partnerships across the nation. “Partnerships like we have with the Butlers, who share our strong vision for BigShots Golf, are driving our momentum in 2021,” said Randall Cousins, senior vice president of BigShots Golf. “We will continue pursuing new market opportunities across the country to expand our brand and bring the BigShots Golf experience to more communities.” 

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 21

CONNECTING TEXANS WHO HAVE IT WITH THOSE WHO NEED IT. Now, it is easier than ever for you to get your work done. Whether you need to find dirt or aggregate, or need to move it, Soil Connect has the right product for you.

Find out for yourself just how easy it is. Visit SoilConnect.com CONNECT NOW

Page 22 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

More contractors read Construction Equipment Guide! That’s right.

CEG has more subscribers in Texas than any other industry publication. Want proof? Give us a call. We’d love to talk about it. 877-877-4997 Or

602-679-8759

We’ve got a free gift for you when you call.

Join all the leading equipment brands that use CEG to reach their contractor audience.

Both in print and online! CAT • Deere • Komatsu • Volvo • Bobcat • Vermeer • Powerscreen • Case • Wirtgen • Liebherr Gomaco • McCloskey • Link-Belt • Hyundai • Dynapac • LeeBoy • Bell Trucks • Niece • Takeuchi

www.ConstructionEquipmentGuide.com

Construction Equipment Guide • Texas State Supplement • www.constructionequipmentguide.com • March 28, 2021 • Page 23

The W Wor orldwide e Leader in Concrete Paving T Technolo echnology

ww ww.gomaco.com m ❘ inffo@gomac o@gomacco.com GOMACO offers the full range of concrete slipform p pavers, curb and d gutt tter machiness, placer/sp er/spreaders, texture/cure machines and bridge/ idge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+ G ® control system, created in-house by our soffttware engineers from the wants and needs of contractors paving in the field. At the heart of GOMACO equip fie pment is our passion for concrete and our commitment to our customers. We look ffo orward to visiting with you about your upcoming paving projects and your concrete paving equipment needs.

ROMCO Equipment Co.

Sierra Machinery, Inc.

www.romco.com

www.sierraelpaso.com

Buffalo, TX 903-322-5602

Ft. Worth, TX 817-626-2288

Longview, TX 903-758-5576

Carrollton, TX 214-819-4100

Houston, TX 713-937-3005

Midland, TX 432-234-9409

939 Hawkins Boulevard El Paso, TX 79915 915-772-0613

Closner Equipment Company Inc. www.closner.com San Antonio Main Branch 21910 FM 2252 Schertz, TX 78154 210-732-2131

Austin Branch 13800 FM 973 N Manor, TX 78653 512-272-8200

Page 24 • March 28, 2021 • www.constructionequipmentguide.com • Texas State Supplement • Construction Equipment Guide

True Power. At Bane Machinery, we offer Liebherr machines that are custom-engineered to perform efficiently. And we stand behind them with full service. Count on us for original parts, factorytrained technicians, and an extensive inventory of machines for your toughest jobs. We can also service your equipment to OEM standards in the shop or the field. We haven’t compromised on anything; why should you?

DALLAS 2449 Manana Dr. Dallas, TX 75220 Ph: (214) 352-2468

FORT WORTH 10505 North Freeway Fort Worth, TX 76177 Ph: P (817) 847-5894

TYLER 3402 N. NE Loop 323 Tyler, TX 75708 Ph: (903) 597-6641