In Chattanooga, Tenn., the second phase of construction on the I75/ I-24 interchange improvement project is on track for a spring 2026 completion. The Tennessee Department of Transportation (TDOT) is overseeing the design-build effort, with the cost of Phase II work estimated at $162 million.
“The original plan was to reconstruct the entire interchange in a single project,” Jeff Blevins, TDOT Region 2 manager of alternative delivery, told Construction Equipment Guide. “However, due to funding limitations, it was divided into two phases. Phase II fulfills the remaining objectives of the initial design, ensuring that the full scope of improvements is realized.”
TDOT photo
THIS ISSUE
SOUTHEAST EDITION
8 AMAZON INVESTS $12B TO BUILD DATA CENTER CAMPUSES IN LA.
Amazon announced a $12 billion investment to construct data center campuses across Caddo and Bossier parishes. The multisite development marks one of the largest construction projects in the region and is designed to support long-term cloud computing needs.
8 NEW LANE ON FLA. TURNPIKE OPENS NEARLY THREE YEARS EARLY
The Lane Construction Corporation, the United States subsidiary of Webuild Group, has advanced construction activities on Florida’s Turnpike/State Road 91 in Minneola to expedite the opening of a third southbound lane — nearly three years early (1,020 days ahead of schedule).
12 CONSTRUCTION EQUIPMENT GUIDE HONORS WOMEN IN CONSTRUCTION
Construction Equipment Guide (CEG) celebrates Women in Construction (WIC) this March by highlighting three talented women who presented at ConExpo-Con/AGG 2026 earlier this month as part of the EmpowerHER Workshop during the show.
16 DYNAPAC NAMES JENNIFER BISHOP DIRECTOR OF PRODUCT MARKETING
Dynapac North America announced the appointment of Jennifer Bishop as director, product marketing and customer experience. In this expanded leadership role, Bishop will be responsible for shaping and executing Dynapac’s product marketing strategy across North America.
20 BRIAN HAYDEN WINS CAT’S GLOBAL OPERATOR CHALLENG
Brian Hayden, operator of Hayden Excavating and Welding in Wells, Maine, proved he was the best of the best after taking on three demanding challenges and eight other finalists at Caterpillar’s Global Operator Challenge, held during ConExpo-Con/AGG 2026.
30 SKANSKA SIGNS $77M CONTRACT TO REBUILD SCHOOL IN TAMPA, FLA.
The project includes the demolition and rebuilding of Stewart Middle Magnet School and the development of a modernized, shared campus that supports both the middle and elementary school students. The new facility will encompass more than 135,000 sq. ft. of educational space.
32 HYUNDAI ANNOUNCES MIKE ROSS AS ITS NEW CHIEF OPERATING OFFICER
HD Construction Equipment Hyundai North America announced that it recently promoted Michael Ross to chief operating officer, where he will oversee daily operations, as well as support Hyundai North America’s president and CEO, Stan Park, in overseeing the organization’s operational strategy.
34 NEW SMYRNA BEACH, FLA., BEGINS WATER TREATMENT EXPANSION
New Smyrna Beach Utilities joined with city officials and project partners, PC Construction and Stantec, to break ground on the Glencoe Water Treatment Plant Pellet Softening Expansion. The project marks a historic milestone as the largest application of this advanced treatment technology in Florida.
37 RPC INC. ANNOUNCES INVESTMENT IN TOPCON SOLUTIONS STORES
The agreement marks a milestone for the Topcon organization and its impact on the construction technology market in the United States. The investment will strengthen TSS’s continued commitment to help more contractors modernize their job sites through its technology solutions, according to the company.
38 CAT ANNOUNCES ACQUISITION OF RPMGLOBAL HOLDINGS LIMITED
Caterpillar Inc. has acquired RPMGlobal Holdings Limited, an Australian-based mining software company. The acquisition expands Caterpillar’s portfolio of data-driven mining technology and software solutions that help customers plan, operate and manage their sites more efficiently.
38 GREENVILLE, S.C., BRIDGE MARKS
CONSTRUCTION HALFWAY POINT
SCDOT continues rehabilitation work on the Church Street bridge over East Broad Street in downtown Greenville. Nearly a year into the renovation, crews have replaced the bridge’s bearings and are constructing new sidewalks. Work is progressing on the west side, in phase three of four total phases.
New Lane On Fla. Turnpike Opens Nearly Three Years Early
Significant congestion relief has come sooner than expected for motorists traveling along Florida’s Turnpike (SR 91) between Hancock Road and U.S. 27, due to an accelerated construction effort on the widening project.
The Lane Construction Corporation, the United States subsidiary of Webuild Group, has advanced construction activities on Florida’s Turnpike/State Road 91 in Minneola to expedite the opening of a third southbound lane — nearly three years early (1,020 days ahead of schedule).
This fast-tracked schedule will ease congestion along one of Florida’s busiest corridors, improving connectivity, reliability and safety for commuters and travelers. The 7-mi. project from Minneola Interchange to north of O’Brien Road adds multiple lanes in both directions, two new ramp movements at U.S. 27 and enhances operational efficiency. This milestone is part of Florida’s Turnpike Enterprise’s broader mainline widening initiative, a critical investment to enhance capacity along a vital freight and hurricane evacuation corridor serving residents and more than 100 million visitors annually.
This achievement highlights Lane’s ability to deliver complex infrastructure ahead of schedule through innovation and collaboration. Building on this momentum, Lane completed the I-275 Section 7 phase 1 project in Tampa early last year. From major highway expansions to advanced mobility solutions, Lane consistently sets the benchmark for performance and reliability — helping communities travel safer, faster and smarter.
For more information, visit laneconstruct.com.
Amazon Invests $12B to Build Data Center Campuses in La.
Amazon announced a $12 billion investment to construct data center campuses across Caddo and Bossier parishes. The multisite development marks one of the largest construction projects in the region and is designed to support long-term cloud computing needs.
Amazon is partnering with STACK Infrastructure to lead construction and development. STACK expects the project to support up to 1,500 construction jobs, creating significant opportunities for local contractors, skilled trades and suppliers throughout northwest Louisiana.
“STACK is proud to partner with Amazon, the state of Louisiana and local stakeholders to responsibly develop the digital infrastructure supporting this significant expansion,” said Matt VanderZanden, CEO of STACK Americas. “This development reflects our commitment to investing at scale in ways that support long-term operations, strengthen local systems and contribute to sustained regional growth.”
will create long-term benefits for the region.
“Amazon’s $12 billion investment in northwest Louisiana will build next generation data center campuses to support AI and cloud computing, ensuring opportunities for local communities,” he said. “We're creating hundreds of high paying jobs and making substantial investments in local infrastructure to serve customers. We're grateful for our strong partnerships with local leaders and proud to deepen our commitment to Louisiana.”
Local economic leaders say the construction phase alone represents a major milestone for the region.
State leaders say Amazon’s buildout will strengthen the region’s position as an emerging technology hub.
“Amazon is making a long-term commitment to Louisiana because our state delivers — prime sites, strong infrastructure and a skilled hardworking workforce ready to support the next generation of technological innovation,” Louisiana Gov. Jeff Landry said. “Investments of this magnitude put Louisiana at the center of operations relied on across the country and connect our communities to jobs that power how Americans live, work and do business.”
In addition to construction activity,
Amazon will fully fund all new energy infrastructure required to power the campuses through its work with Southwestern Electric Power Company. The company is also investing up to $400 million in public water and sewer improvements to support the sites and enhance system resilience. The facilities will use only verified surplus water for cooling and will rely on outside air for most of the year to reduce electricity demand.
David Zapolsky, Amazon’s chief global affairs and legal officer, said the investment
“Amazon’s continued investment in northwest Louisiana, alongside STACK Infrastructure, is transformational, building upon our region’s strength as a destination for innovation and technology,” said Justyn Dixon, economic development director of the North Louisiana Economic Development Partnership. “Now we are bringing hundreds of high paying jobs, millions in tax revenue for our schools and proof that northwest Louisiana competes on the global stage.”
Lane Construction photo
The Lane Construction Corporation has advanced construction activities on Florida’s Turnpike/State Road 91 in Minneola to expedite the opening of a third southbound lane — nearly three years early.
Amazon photo
Amazon is partnering with STACK Infrastructure to lead $12 billion construction and development of new data center campuses in northwest Louisiana.
Construction Equipment Guide Honors Women in Construction
By Brittney Christopher CEG CORRESPONDENT
Construction Equipment Guide (CEG) celebrates Women in Construction (WIC) this March by highlighting three talented women who presented at ConExpo-Con/AGG 2026 earlier this month.
One of the sessions hosted by ConExpo-Con/AGG 2026, known as the EmpowerHER Workshop, highlighted six women working in and advancing the construction field. Construction Equipment Guide spoke to three of them to share their successes, insights and advice to women in the field or looking to expand into the construction field.
Amy Henningfield, director of workforce development of Superior Construction Henningfield, who began her career as an administrative assistant, now boasts more than 30 years of heavy civil construction experience and a director’s title with Superior Construction, a prominent fourth-generation family-owned and -operated heavy civil contractor based in Portage, Ind. Along the way, she earned both her bachelor’s degree and MBA (in recent years), while building a career in one of the most demanding industries in the country.
Henningfield serves as an active committee and board member of several groups including Construction Advancement Foundation (CAF) Women in Construction, Indiana Constructor’s Inc.’s (ICI) Women in Roads, Northwest Indiana Influential Women Association (NWIIWA) and holds a steering committee role in Superior’s Women in Construction (SWiC). In recent years, Henningfield has been recognized as Mentor of the Year, named Outstanding Women in Construction and received a Women in Construction PACER (Pavement, Asphalt, Concrete, Equipment, Rental) Award.
Driven by a belief that “you can’t be what you don’t see,” coupled with a commitment to educate and encourage young women to enter the construction field, Henningfield also contributed to the development of the very first girls’ summer camp for ICI Women in Roads. Altogether, she strives to create opportunities for women within the construction field.
In the EmpowerHER Workshop, Henningfield focuses her message on the importance of ownership, not just opportunity.
“Confidence doesn’t come first — action does,” she said. “You build confidence by stepping into rooms before you feel fully ready. You build credibility by raising your hand. You build influence by delivering results consistently.”
“You don’t have to ‘fit’ into construction,” she added. “Construction is not an industry where you have to know everything before you start. It’s an industry where you grow by doing. Do not wait until you feel ready — because you never will be. Please take that step. This industry needs you."
She urges women interested in the field to find mentors, network and explore local apprenticeship programs and career fairs. She emphasized the need for women in the industry and believes the industry offers massive opportunity, with the ability to lead and empower others.
“This industry needs more problem-solvers, leaders, builders, and innovators — and women bring that,” she said. “There is space here, and there is a real impact to be made here.”
Katie Kelleher, technical publications and careers manager of Construction Plant-Hire Association (CPA) and technical and development of KatieCranes
From the very start of her career in the construction industry, Kelleher has made a lasting impact and continues to break down stereotypical gender barriers. Beginning in 2014, she became the very first woman to join the Lifting Technician Apprenticeship program with Select Plant Hire/Laing O’Rourke, an international construction and engineering company based in Dartford, U.K., with no prior construction experience. Despite that, she found a passion for the field and continued her career the past 12 years with the company, initially operating cranes on major infrastructure projects and now leading training and safety initiatives.
When she’s not providing technical guidance or developing training programs, Kelleher actively shares industry insights on her podcast, blog and social channels while regularly speaking at major conferences, colleges, career fairs and more.
By sharing her career and experience as a woman in the construction field, Kelleher landed a spot on the Top 100 Women in Construction list, Construction News and the Women in Trade Association Powerlist. Additionally, the Earthmovers Magazine, Plant Planet and television series Impossible Engineering featured Kelleher and her accomplishments.
Kelleher’s advice to women is to “try something completely different.” She told Construction Equipment Guide, “There isn’t one mold. If you’re willing to learn and work hard, there is space for you and it’s genuinely a space where
Katie Kelleher photo
Katie Kelleher, technical publications and careers manager of the Construction Plant-Hire Association (CPA) and technical and development of KatieCranes, recently spoke at the EmpowerHER Workshop at 2026 ConExpo-Con/AGG.
Jennifer Todd photo
Jennifer Todd, executive director of A Greener Tomorrow, has received prestigious awards from the Top 20 Under 40 and was named a finalist for CBO Outstanding Women in Construction and an honoree for the South Florida Business Journal Diverse Voice.
Amy Henningfield photo
Amy Henningfield, director of workforce development of Superior Construction, recently spoke at the EmpowerHER Workshop at 2026 ConExpo-Con/AGG.
POWER FOR EVERY JOB. FINANCING THAT WORKS.
Get the CASE equipment you need with limited-time 0% financing, backed by CASE Power & Equipment’s trusted support.
+ 0% for 60 months on the DL550 dozer.
+ 0% for 48 months on mini and mid excavators, CTLs, skid steers and heavy excavators.
+ 0% for 36 months on heavy wheel loaders.
Dynapac Promotes Bishop to Product Marketing Director
Dynapac North America announced the appointment of Jennifer Bishop as director, product marketing and customer experience.
In this expanded leadership role, Bishop will be responsible for shaping and executing Dynapac’s product marketing strategy across North America, including product positioning, messaging, go-to-market effectiveness and strengthening customer engagement across distribution channels, rental partners and end users.
Bishop brings more than 22 years of industry experience to this role, including a long and successful tenure with Dynapac and most recently serving as dealer sales manager of the Southeast region.
Throughout her career with Dynapac, she has held several key roles in aftermarket product support, marketing and communications, inside sales, customer service and regional sales leadership, developing deep insights into customer needs and market dynamics.
In her new position, Bishop will coordinate product strategy and messaging with global and local market requirements, lead new product launches, drive demand through targeted campaigns and ensure consistent and impactful brand representation throughout the region.
“I am incredibly excited to step into this new role to ensure our products and technologies are aligned with what helps our customers grow and succeed,” Bishop said. “Understanding our customers’ businesses and challenges first-hand equips us to deliver solutions that truly fit their needs and strengthen their competitiveness.”
“Jennifer’s deep industry experience, entrepreneurial spirit and focus on customer success make her the ideal leader to drive our product marketing and customer engagement strategy across North America,” said Yann Monnet, president and general manager of Dynapac North America. “In this role, Jennifer will be instrumental in defining how Dynapac’s products and technologies meet market demands and support our distribution and rental partners, while strengthening relationships with end-users. Her commitment to customers and passion for continuous improvement will help advance our mission of delivering the right portfolio for the North American market.”
For more information, visit
Dynapac photo
Jennifer Bishop
Brian Hayden Wins Cat’s Global Operator Challenge
By Craig Mongeau CEG EDITOR IN CHIEF
Brian Hayden, operator of Hayden Excavating and Welding in Wells, Maine, proved he was the best of the best after taking on three demanding challenges and eight other finalists at Caterpillar’s Global Operator Challenge, held during ConExpo-Con/AGG 2026.
Each test pushed finalists to their limits, demanding technical mastery and total machine control. In the end, Hayden delivered when it mattered most.
The stakes were significant. The winner receives a $10,000 prize — either cash or a first-class trip for two to any Caterpillar facility worldwide (depending on local laws) — along with global recognition.
Contestants competed in three events designed to test skill, precision and versatility.
Ace of Loaders Challenge: Operators tested speed and control by loading a truck, switching to forks, transporting and placing a pipe. Smooth tool transitions were key to winning this event.
Street Gambler Challenge: This urban-inspired challenge showcased the finesse and power of excavator operators as they tackled a series of precision tasks.
Centennial Push Challenge: This dozer challenge combined tire pushing, fine grading and pipe placement to honor a century of earthmoving. Blade control and precision were critical to success.
Hayden earned first place in the Street Gambler and Centennial Push challenges, while Gunter Dewit of Belgium won the Ace of Loaders challenge.
Global Field of Finalists
In addition to Hayden, whose Cat dealer sponsor was Milton CAT, eight operators from around the world competed in the finals:
• Sebastian Behr, Reuen Tief- und Straßenbau GmbH, Germany — Dealer sponsor: Zeppelin GmbH
Built for the Job
Hayden, 24, built his skills on the job while growing up in his family’s business, Hayden Excavating and Welding, which was founded in 1999. The company handles residential and smaller commercial projects primarily in southern Maine.
With the support of dealer Milton CAT, Hayden advanced through local qualifiers and semifinals to reach the global stage at Operator Stadium.
Winning two of the three individual challenges helped secure his title as Global Operator Challenge Champion.
“I’ve been operating equipment since before I could walk when I was in my dad’s lap in an operator’s cab,” Hayden told Construction Equipment Guide. “And then, ever since I was probably five years old, when I could reach the pedals by myself. I was off on my own after that.”
Hayden said he entered the competition almost on a whim.
“I got an e-mail from my local dealer, Milton CAT, saying the Global Operator Challenge was coming back around,” he said. “I figured I’d throw my hat in the ring and see how I could do at the local dealer level. I didn’t even think it would go anywhere. And here we are.”
His victory marks a milestone: Hayden is the first United States-based champion of the Cat Global Operator Challenge.
“It feels great to be able to win representing the United States,” he said.
Competing on a global stage in front of a crowd easily in the thousands brought its share of pressure, Hayden admitted.
“Oh, I could feel it — there was a lot of pressure,” he said. “But once I got in the machine and the door closed, it was just me and what I needed to do. I tried not to look at the crowd, not to think about anything else, and just focus on what I had to do to win.”
For Hayden, the victory is both personal and professional recognition.
“It’s a great honor and accomplishment to be recognized for what I’ve been doing my whole life,” he said. CEG
Milton CAT photo
Brian Hayden built his skills on the job while growing up in his family’s business, Hayden Excavating and Welding.
Brian Hayden, operator of Hayden Excavating and Welding in Wells, Maine, won the Cat Global Operator Challenge at ConExpo-Con/AGG 2026.
been operating equipment since before I could walk when I was in my dad’s lap in an operator’s cab,” Brian Hayden said.
CEG photo
Hayden Excavating and Welding photo
Brian Hayden (L) and his family’s company, Hayden Excavating and Welding, handles residential and smaller commercial projects primarily in southern Maine.
Milton CAT photo
Alabama Heavy Machines Inc.
www.heavymachinesllc.com
THEODORE (251) 653-5955
BIRMINGHAM (205) 323-6108
DECATUR (256) 898-0550
Lift Truck Service Center, Inc.
Arkansas LiftTruckServiceCenterInc
www.lifttruckservicecenterinc.com
LITTLE ROCK (501) 568-3330
Florida Heavy Machines Inc.
www.heavymachinesllc.com
PENSACOLA (888) 366-9028
Great Southern Equipment, LLC. www.gsequipment.net
State Machinery & Equipment Sales, Inc. www.statemachineryco.com
KENNER (504) 464-0431
North Carolina
Liebherr r Equipment Source libh www.liebherr.com
RALEIGH (919) 329-0080
RECO Equipment, Inc. www.recoequip.com
CHARLOTTE (704) 399-7555
Tennessee Heavy Machines Inc. www.heavymachinesllc.com
MEMPHIS (901) 260-2200
RECO Equipment, Inc. www.recoequip.com
LaVERGNE (615) 610-7326
VIRGINIA Liebherr r Equipment Source www.liebherr.com
MANASSAS (703) 392-0111
(757) 240-4250 LOUDON (865) 686-8686
material handling equipment and technology in th components are developed and manufactured in-h or in close collaboration with our partners to ensu possible quality standards.These components inc drive and controltechnology, diesel engines, and a components for hydraulics, gearboxes and electro Reach out to your local Liebherr distribution partne nformation.
e USA Main ouse by Liebherr re the highest lude the entire variety of nic systems. rfor more
ConExpo-Con/AGG 2026 Attracts More Than 140,000
ConExpo-Con/AGG 2026 attracted more than 140,000 construction professionals from 128 countries from around the world to Las Vegas, where attendees gathered to buy equipment, conduct business and explore the latest technology shaping the future of the industry.
Held March 3-7, 2026, the show brought together contractors, manufacturers, technology leaders and workforce advocates to showcase new equipment, emerging technologies and solutions designed to help the construction sector build more efficiently, safely and sustainably while maintaining strong industry momentum.
Spanning more than 3 million sq. ft. of exhibit space, ConExpoCon/AGG 2026 featured more than 2,000 exhibitors showcasing the latest equipment, technology and services across every major construction sector.
From massive earthmoving machines, towering cranes and next generation paving equipment to digital jobsite solutions, automation, sustainability and advancements, the show floor offered attendees the opportunity to see equipment up close, connect directly with manufacturers and make informed purchasing decisions that will shape projects and businesses in the years ahead.
Worldwide representatives from Sakai attended ConExpo, including (L-R) Masahiro Tokita, managing executive officer and general manager — International Business Headquarters; Chris Takara, executive officer, GM of corporate strategy; Ichiro Sakai, president, SAKAI Heavy Industries; and Yasunori Azumi, president, SAKAI America.
compact radius design and shares the same engine platform with other Cat compact models.
Caterpillar brought its ensemble of mini-excavators, including the new 301 CR micro mini-excavator, which features a
Brittyn Heisker (L), executive director, and Stefani Martella, board member, of Women of Asphalt, represented women in the industry at ConExpo.
Bobcat had the Robocop-type future concept machine at ConExpo-Con/AGG. No scheduled release date on this machine was available.
Powerscreen products were on display.
In the Central Hall, NPK’s expansive exhibit showcased the company’s wide range of attachments, including breakers, shears, compactors and more.
Aaron McKee, founder and president of Purple Wave Auction met up with Tom Richards of Kirby-Smith Machinery, Fort Worth, Texas, during ConExpo-Con/AGG 2026 in Las Vegas.
Some Georgia boys stop to chat about what’s happening back home including (L-R) Mitchell Gross and Billy Brice Jr. of Ascendum Machinery; and Tim Houchens of SITECH South.
Geith bucket was
Day.
Komatsu’s WA700 mining-class wheel loader was poised to dump material into a HD605 rigid frame off-highway dump truck at the company’s display.
Mauldin had a variety of machines on display, including this 1560 asphalt paver.
“ConExpo-Con/AGG is where the construction industry comes to see what’s next,” said Dana Wuesthoff, show director, ConExpo-Con/AGG. “This week demonstrated the resilience and ingenuity of our industry. From advanced machinery to digital tools that help crews work safer and smarter, the innovations unveiled here will shape jobsites for years to come.”
The energy on the show floor translated into real business opportunities for show attendees who traveled to Las Vegas to evaluate new machines and connect with manufacturers. For many at the show, ConExpo-Con/AGG provides a rare opportunity to see equipment firsthand, compare solutions and make purchasing decisions that will shape their operations for years to come.
“We’ve actually made deals here, met clients and connected with new partners,” said Ryan Ford of F&G Trucking Crane. “It’s one of the best places to bring the industry together and move business forward.”
see CONEXPO page 24
During ConExpo-Con/AGG, Case announced three new motor grader models. The new GR Series grader models are a result of a new collaboration formed between CNH and Bell Equipment. Under the agreement, CNH's Case Construction Equipment brand will have exclusive distribution across the United States and Canada for the motor grader models, manufactured at Bell facilities. (L-R) are Humayun Chishti, president of CNH Construction; Stephen Jones, director of market, dealer and business development of Bell Equipment; Ashley Bell, CEO of Bell Equipment; Gerrit Marx, CEO of CNH; Eric Zieser, product strategy and strategic alliances of CNH; Franco Invernizzi, vice president, global head of strategy, business, network development and strategic alliances of CNH; and Leandro Lecheta, head of CNH Construction, Americas.
Teddy McKeon, executive publisher of Construction Equipment Guide, calls attention to the free custom Dirty Graphix give away at CEG’s booth at ConExpo-Con/AGG 2026.
Volvo CE showcased a wide variety of equipment at its Festival Lot exhibit.
Hyundai unveiled the new HX400 excavator at ConExpo on March 3, 2026. Wacker Neuson’s display included mini-excavators, dumpers and more.
This
dressed to celebrate St. Paddy’s
Industry Gathers in Las Vegas to ‘See What’s Next’ at
Navin Baliga (L) and David Perry (C) talk with show attendees about the products and services provided by their company, HydrauliCircuit Technology, based in McDonough, Ga.
CONEXPO from page 23
Defining Next Jobsites
Across the show floor, manufacturers unveiled technologies and equipment designed to define the next generation of construction jobsites.
Komatsu highlighted advancements in intelligent machine control and automation, including its PC220LCi-12 intelligent excavator, which uses integrated sensors and 3D design data to help operators excavate to grade with greater precision and reduce rework. Komatsu also introduced the all-new HM4606 46-ton articulated truck, the largest in its lineup.
LiuGong showcased a range of advanced machines including the 870 HE loader, 952F excavator and 924 FE electric excavator underscoring the industry’s growing investment in electrification and lower-emissions equipment.
“We’ve seen a lot of equipment that we’re looking to purchase in the near future,” said Thomas Coyne of Donjon Marine. “Being able to put your hands on the machines and talk directly with manufacturers makes ConExpo-Con/AGG a great show for companies like ours.”
Technology across the show floor also demonstrated how digital solutions are transforming construction workflows.
Topcon Positioning Systems 3D-MC Edge is a new feature within the 3D-MC environment engineered to focus directly on a machine’s cutting edge for enhanced accuracy and responsiveness.
Lots
The Menzi Much M220 walking excavator is equipped with a 75 hp 4-cylinder turbo diesel engine and can be dismantled for easy transport.
of enthusiasm buzzed around the Hitachi display as the company segues from the Hitachi name to LANDCROS in the next 12 months.
John Deere spokespeople Lauren Meyer and Matt Costello describe the operator advantages of the Smart Grade 772P grader.
In one of the many conferences at ConExpo 2026, Jae-young Moon, president and CEO of HD Construction Equipment, addresses the international press corps.
(L-R): Rod Shurman, construction industries group president; Jaime Mineart, chief technology officer; and Ogi Redzig, chief digital officer, all of Caterpillar, discussed safety, technology and more on the Ground Breakers Stage at ConExpo.
Terry Dolan of CNH addresses the trade media during Case’s press conference March 3, 2026, at ConExpoCon/AGG.
Samsara showcased connected operations technology that enables contractors to monitor equipment utilization, safety and fleet performance across jobsites.
Doka demonstrated advanced formwork and digital job site solutions designed to improve efficiency and safety on complex infrastructure and building projects.
Compact equipment leader Bobcat also showcased technology focused on the future of compact construction, highlighting advances in AI, electrification, autonomy and connectivity, including its Bobcat Jobsite Companion, an AI-enabled system designed to help operators work more efficiently with realtime machine insights and jobsite guidance.
Innovation across the industry was further recognized through the Next Level Awards, which honor breakthrough technologies transforming how construction projects are built and managed. The awards spotlight equipment and technology innovations that improve productivity, sustainability and jobsite safety, reinforcing ConExpo-Con/AGG’s role as the global stage where the construction industry unveils ideas and machines shaping its future.
ConExpo-Con/AGG announced the winners of its Next Level Awards program on March 6 during a special event on the Ground Breakers Stage. After three days of voting, show attendees selected Husco’s GenSteer as the ConExpo-Con/AGG Contractors’ Choice for best equipment and Gravis Robotic’s Gravis Rack as the ConExpo-Con/AGG Contractors’ Choice for best technology.
The SENNEBOGEN 830 E is a multifunctional machine with a number of configurations that make it a good solution for many different industries.
Hitachi COO, Simon Wilson (third from R) welcomes dealer representatives of Cowin Equipment Company to an evening event, including (L-R) Tom Powell, Andrew Bell, James Chafin, Jamie Cowin, (Wilson), Will Bice and Russ Huber.
The North American IMT dealer, Kelly Tractor of Miami, Fla., had another great ConExpo exhibit of IMT hydraulic drilling rigs.
Kioti cleverly built this transformer — aka its mascot, a coyote.
Jay Allen (L) and Daniel Allen — second and third generation of Allen Engineering ownership — were in their element and thoroughly enjoying their time promoting their products at the show.
(L-R): FAE USA CEO, Giorgio Carera; Diego Scanzoni, FAE Group president; and Davide Baratta, FAE sales manager, brought an array of products to the show that was a must-see exhibit.
At the Historical Construction Equipment Association (HCEA) are Larry Kotkowski of Lakeside Sand & Gravel Inc., and Brandi Daniels, HCEA. On display at the booth is a model of a Bucyrus-Erie 60-S loader.
When the desert sun got hot and feet grew tired from all the walking, SANY had a perfect place to relax and listen to some country music.
The world’s first compact track loader, the Takeuchi TL 10, was on display for its 40th anniversary at the center of the Takeuchi exhibit.
ConExpo’s Ground Breakers Stage Is Hub for Discussion
(L-R): Chad Norton, Richard Gatlin, Blaine Stanley, Brian Marsh and Mike Harrison, all of Ford Construction Company, Dyersburg, Tenn., and Darrell Thompson of Power Equipment, Nashville, Tenn., with the newest addition to Vögele’s lineup — the Super 2003-5 paver.
CONEXPO from page 25
“Autonomy and retrofit technology are changing the game,” said Federik Filz-Reiterdank of Crewline. “The ability to upgrade existing machines with sensors and automation is accelerating adoption across the industry.”
“ConExpo-Con/AGG highlights the innovation pipeline that keeps construction moving forward,” said Eric Sauvage, president and CEO of LBX Company and ConExpo-Con/AGG 2026 show chair. “The technologies introduced this week are not concepts. They are real-world solutions contractors can adopt now to build faster, safer and more sustainably.”
Ground Breakers Stage Delivers Industry Thought Leadership
The Ground Breakers Stage served as a hub for forwardlooking conversations, drawing strong attendance for sessions on artificial intelligence, workforce development, infrastructure investment, sustainability and the evolving role of data across construction operations.
Industry leaders and technology experts explored how digital transformation, manufacturing advancements and collaborative partnerships are reshaping the sector and helping companies navigate changing market dynamics.
The momentum continues beyond the show floor as the Ground Breakers Stage sessions are now available to stream on demand, where they have already generated thousands of online views, extending the conversation around the technologies and ideas transforming construction.
and
machines, placer/spreaders and more.
Dynapac and Bluelight Machines teamed up to showcase autonomous compact solutions. This Dynapac CA2500D seismic roller operates in Bluelight Machines’ live autonomous demo.
GOMACO’s huge display included concrete slipform pavers, curb
gutter
John Deere welcomed attendees to its outdoor display at ConExpoCon/AGG 2026.
The outdoor exhibits ConExpo-Con/AGG 2026 were a sight to behold.
(L-R) are Shannon Seymour, LeeBoy; Jean-Claude Fayat, Fayat Group president; Kristi Randolph, LeeBoy; and Bryce Davis, LeeBoy.
Neil Suitor, vice president of engineering of McCloskey International, displays the new J5 jaw crusher, which he described as the company’s most heavy-duty machine that can be transported easily.
The Hitachi After Hours event at ConExpo was a big hit. On hand (L-R) are Russ Huber Cowin Equipment, Birmingham, Ala.; Aaron Reicherts, Mid Country Machinery, Fort Dodge, Iowa; Bob Edwards, Mid Country Machinery; and Mike Dixon, Hitachi Construction Machinery Americas, Newnan, Ga.
Case
An attempt to set a new world’s record for most people wearing high-visibility vests was thwarted by everyone’s enthusiasm to get into the show. They’ll try again in three years.
G65
Morooka’s MST110CR carrier can carry everything from employees to material on a job site. It also
At the Felling exhibit in the Platinum Lot, attendees could enter to win $500. Here, a Gladiator G30 drill rests atop of a 60,000-lb. Felling trailer. The drill is from Wolf Machinery Supply in Four Oaks, N.C.
Global Gathering Focus On Building Future
ConExpo-Con/AGG 2026 reinforced construction’s role as a driver of economic development, supporting infrastructure modernization, energy expansion, manufacturing growth and resilient communities. The show created opportunities for contractors and manufacturers to connect directly, exchange ideas and accelerate adoption of technologies that improve project outcomes.
“The value of coming here is almost impossible to quantify,” said Justin Herle or Datloff Bros. Construction. “You meet vendors, learn how others are solving problems and discover new ways of doing things that you can take back to your business.”
In addition to exhibits, attendees participated in 150 comprehensive education sessions, live demonstrations and peer-topeer discussions designed to deliver actionable insights for businesses of every size.
Classroom education is a cornerstone of the ConExpoCon/AGG experience, delivering an all-encompassing lineup of panels, workshops, and keynote conversations designed to help attendees stay ahead of a rapidly evolving construction landscape. From hands-on equipment insights to forward-looking discussions on artificial intelligence, sustainability, and workforce innovation, ConExpo-Con/AGG provided learning opportunities for every role and career stage.
New weekend workshops for 2026 brought together hundreds of women in construction, small business owners and maintenance professionals for peer driven learning at the show.
see CONEXPO page 78
This
TV620B compact track loader was decked out in its red, white and blue.
This
grader features a 53-in. circle with “A” frame drawbar, giving big grader performance in a compact package, according to Weiler.
LeeBoy presented a Rosco NB15 three-wheeled sweeper.
(L-R): Huddig Inc.’s Hans Bergqvist; Brian Licata, sales; Paul Barlow, president; Amanda Fredlund, marketing; and Daniel Myrgren, debut Huddig’s versatile Swedish “tool belt” machines that serve the purpose of a loader, excavator, crane and backhoe in one machine.
Mike Rowe, former host of Dirty Jobs and founder of the mikeroweWORKS foundation, stopped by AEM’s I Make America booth at ConExpo. I Make America tours the United States to promote companies who manufacture products in America.
can be used as a haul truck for dumping.
Guests could try out a simulator featuring a boom and hydraulic breaker at the Montabert/Tramac booth.
Skanska Signs $77M Contract to Rebuild School in Tampa, Fla.
The integrated campus will feature shared amenities, including a cafeteria and a media center designed to support collaboration and efficient use of space.
Skanska, a leading construction firm, has signed a $77 million contract with Hillsborough County Public Schools to rebuild Stewart Middle Magnet School, designed as a combined campus with the adjacent Just Elementary School. This project marks a significant milestone in revitalizing educational facilities to meet the educational needs of Tampa’s rising student population.
The project includes the demolition and rebuilding of Stewart Middle Magnet School and the development of a modernized, shared campus that supports both the middle and elementary school students. Designed by FleischmanGarciaMaslowski Architecture, the new facility will encompass more than 135,000 sq. ft. of educational space. Stewart Middle Magnet School will provide capacity for more than 1,000 student stations, while Just Elementary School will serve more than 530 students.
The integrated campus will feature shared amenities, including a cafeteria and a media center designed to support collaboration and efficient use of space. The existing gymnasium at Stewart Middle Magnet School will remain on campus and will receive new lighting installations and code upgrades as part of the school campus redevelopment project.
“As Hillsborough County Public Schools continues to invest in modern educational facilities, this project will deliver a thoughtfully designed learning environment that supports both academic success and community needs,” said Daniel Abou-Jaoude, vice president of Skanska. “Our construction team brings extensive experience delivering K-12 schools across Florida, and we are proud to partner with the school district to build a modernized campus that will serve students for generations to come.”
Construction of the two schools is expected to be completed in the first quarter of 2028.
Skanska is leading approximately $400 million worth of work on various educational projects throughout Florida in Osceola, Hillsborough, Pasco, Pinellas, Manatee, Marion and Lee Counties.
Skanska photo
Skanska photo
Construction of the two schools is expected to be completed in the first quarter of 2028.
Satisfaction Guaranteed!
Hyundai Announces Mike Ross as Its New Chief Operating Officer
HD Construction Equipment
Hyundai North America announced that it recently promoted Michael Ross to chief operating officer, where he will oversee daily operations, as well as support Hyundai North America’s president and CEO, Stan Park, in overseeing the organization’s operational strategy.
Ross joined Hyundai in February of 2020 as vice president of CE sales, following 24 years working for other construction equipment manufacturers, working his way up from territory sales manager to director of product and operations. Prior to that he served six years in the Army.
Ross worked with Park to help the company navigate through COVID, grow its dealer network and expand its product and parts support operations. Most recently, Ross served as senior vice president over sales, service, product and marketing, before being promoted to COO.
“At a time when almost every organization is experiencing rapid change due to the application of AI to existing and new technologies and processes, I am excited to be working with Hyundai, a company that embraces what’s next,” Ross said. “I am looking forward to working closely with Stan Park, our entire North American team and our dealers to help ensure that Hyundai North America runs efficiently and effectively to drive growth, productivity and continued success for our business and, in turn, our dealers and the customers who use Hyundai equipment.”
For more information, visit hd-hyundaice.com.
Hyundai CE photo Mike Ross
New Smyrna Beach, Fla., Begins Water Treatment Expansion
On Feb. 6, 2026, New Smyrna Beach Utilities (NSBU) joined with city officials and project partners, PC Construction and Stantec, to officially break ground on the Glencoe Water Treatment Plant Pellet Softening Expansion. The project marks a historic milestone as the largest application of this advanced treatment technology in Florida.
The upgrades will improve reliability and capacity, reduce operating costs and preserve Florida’s natural resources. By replacing aging 1970s-era lime softening reactor clarifiers with this modern system, NSBU will extend the life of the existing plant by at least 30 years and significantly delay the need for a costly reverse osmosis facility.
The project offers significant strategic benefits:
• Cost efficiency: The new system utilizes 45 percent fewer chemicals and consumes 50 percent less energy than the current lime softening treatment process.
• Environmental stewardship: The process eliminates lime sludge disposal and reduces byproduct waste by 80 percent.
• Increased capacity: The upgrades will boost plant
capacity to 8.7 million gal. per day (mgd), with provisions for future expansion up to 11.6 mgd to meet demand.
• Resource preservation: By treating water from the Floridan aquifer more efficiently, NSBU maintains its commitment to providing high-quality potable water without increasing withdrawal limits.
The progressive designbuild team of PC Construction and Stantec are partnering with NSBU to complete the design and construction of the facility expansion. This project also included extensive pilot testing of the pellet softening system to ensure the new technology will best meet NSBU’s goals.
“New Smyrna Beach Utilities is excited to bring this industry-leading water softening project to our water treatment plant,” said Efren Chavez, NSBU general manager/CEO. “We spent the better part of the past five years evaluating the technology and its benefits for our community. Not only will it be instrumental in providing a sustainable, high-quality water source for our customers for the foreseeable future, but it will also save significant money in our
water rates for the long term through cost avoidance of building alternative water processing facilities now, such as a reverse osmosis treatment plant.”
“We are proud to partner with NSBU on this exciting project,” said John Yesalonia, construction executive of PC Construction. “This facility is a shining example of how improving aging infrastructure can keep a growing community sustainable and vibrant. By incorporating state-of-the-art pellet softening technology, we’re not only reducing operating costs and enhancing environmental stewardship but also ensuring that New Smyrna Beach Utilities continues to deliver safe, highquality water to its residents for generations to come.”
The expansion includes the new 8,500-sq.-ft. pellet softening facility, administrative spaces, advanced electrical infrastructure and improved site utilities. Completion is expected by late 2027.
New Smyrna Beach photo
(L-R): Dana Hale, Water Resources director; Darren Phegley, project engineer; James Smith, NSBU Commission assistant treasurer-secretary; Efren Chavez, NSBU general manager/CEO; Lillian Conrad, NSBU Commission treasurer-secretary; Jeffrey Devine, NSBU commissioner; Larry Kelly, NSBU vice chairman; and Mike Cardell, water plant manager.
RPC Inc. Announces Investment in Topcon Solutions Stores
Topcon Positioning Systems has announced a significant strategic investment in its United States retail network — Topcon Solutions Stores (TSS) — by RPC Inc.
The agreement marks a major milestone for the Topcon organization and its impact on the construction technology market in the United States. The investment will strengthen TSS’s continued commitment to help more contractors modernize their job sites through its technology solutions, according to the company.
Long-term structural trends in the United States construction market — including housing shortages, infrastructure investment and modernization of aging assets continue to drive demand. Yet the sector has historically lagged in digital adoption, creating substantial opportunity for techenabled retailers to lead the next phase of industry transformation. RPC Inc. sees this moment as a pivotal opportunity to support Topcon Solutions Stores in their journey to drive technology adoption.
“We see tremendous opportunity in the U.S. construction sector, particularly as contractors accelerate their projects through digital transformation,” said David Alban, RPC Inc. board member and CEO and president of Ring Power Corporation. “Topcon is a global leader in positioning technology, and Topcon Solutions Stores have earned the trust of thousands of end users across the country. By investing in TSS, we are supporting a business that is positioned to modernize a massive, essential industry and deliver real value to the professionals who build America’s infrastructure.”
Ivan Di Federico, president and CEO of Topcon Positioning Systems, said, “RPC Inc.’s investment reflects
the growing recognition that positioning technology and job site automation are essential to the future of construction. Topcon Solutions Stores play a critical role in delivering that technology directly to the field, backed by training, service and trusted local support. RPC Inc.’s commitment reinforces the long-term potential of the North American market and the value of our retail network.”
“RPC Inc.’s investment is a strong endorsement of the work our TSS team does to support contractors as they adopt digital workflows, automation tools and
Lodge, executive vice president of construction of Topcon. “The construction industry is changing rapidly, and this investment strengthens the push toward improved productivity and performance.”
“Topcon Solutions Stores currently operates in 14 retail locations and serves 22 states. We are a strong organization that will become stronger with the growth potential this investment brings,” said Mark Contino, vice president of Topcon North American retail distribution, TSS. “As a direct Topcon distributor and an Autodesk platinum partner, we
Cat Announces Acquisition of RPMGlobal Holdings Limited
Caterpillar Inc. has acquired RPMGlobal Holdings Limited, an Australian-based mining software company.
The acquisition expands Caterpillar’s portfolio of data-driven mining technology and software solutions that help customers plan, operate and manage their sites more efficiently.
Headquartered in Brisbane, Australia, RPMGlobal has deep domain expertise in mining technology enablement, providing customers with data-driven software solutions across the mining value chain. Caterpillar announced an agreement to acquire RPMGlobal in October 2025, which was previously reported on Construction Equipment Guide.
“Acquiring RPMGlobal is a notable milestone supporting our strategy to solve the challenges our mining customers face every day,” said Denise Johnson, group president, Caterpillar Resource Industries.
“By combining RPMGlobal’s software
capabilities with Caterpillar’s proven equipment and technology solutions, we will unlock new opportunities to help customers improve mine site performance, while advancing the future of mining technology in a way that is practical, scalable and grounded in their needs.”
“Given the complementary nature of the two companies’ technology offerings, Caterpillar is an ideal home for both our people and our software products,” said Richard Mathews, CEO of RPMGlobal.
“By deeply integrating our solution sets, we will be able to better solve the most difficult challenges mining companies grapple with daily. The team and I are looking forward to working with the Caterpillar team for the benefit of our customers.”
RPMGlobal will continue to offer products and services under the RPMGlobal brand.
For more information, visit caterpillar.com and rpmglobal.com.
Greenville, S.C., Bridge Marks Construction Halfway Point
SCDOT continues rehabilitation work on the Church Street bridge over East Broad Street in downtown Greenville. Nearly a year into the renovation, crews have replaced the bridge’s bearings and are constructing new sidewalks. Work is progressing on the west side, in phase three of four total phases.
To accommodate increased traffic in the area due to the 2026 NCAA March Madness tournament, construction will pause and the bridge will temporarily fully reopen for full traffic access. After the tournament, construction will resume.
Beginning May 1, the bridge will close completely for six weeks. During this closure, crews will resurface the deck using hydro demolition, install new lighting and complete pedestrian improvements, including a 9-ft.-wide side-
SCDOT photo
SCDOT continues rehabilitation work on the Church Street bridge over East Broad Street in downtown Greenville.
CLM EQUIPMENT CO., INC. www.clmequipment.com
Lafayette, LA • 337-837-6693
Lake Charles, LA • 337-625-5942
New Orleans, LA • 504-499-7999
Houston, TX • 281-598-2500
www.hillsmachinery.com
Charlotte, NC • 704-208-5564
Mills River, NC • 828-820-5265
Greensboro, NC • 336-308-3045
Raleigh, NC • 919-746-7938
Greenville, NC • 252-752-7145
Leland, NC • 910-800-2070
Columbia, SC • 803-658-0200
North Charleston, SC • 843-225-9377
Greenville, SC • 864-546-5208
Savannah, GA • 866-830-7577
Ashland, VA • 804-964-1900
Chesapeake, VA • 757-317-0494
Wise, VA • 276-268-4601
www.link-beltmidatlantic.com
Ashland, VA • 866-955-6071
Chesapeake, VA • 800-342-3248
www.lylemachinery.com
Prattville (Montgomery), AL 334-717-2175
Wright Brothers Works to Improve Tennessee Interchange
The previous interchange featured a left-hand exit ramp from I-75 north to I-24 west, which did not comply with current design standards. Phase I relocated the exit to the right and enhanced the I-75 north entrance ramp from Ringgold Road. These changes eliminated problematic weaving patterns and increased overall capacity with additional lanes on I-75.
“Phase II adds lanes to I-24 between the core of the interchange and Germantown Road and reconfigures entrance and exit ramps in both directions at Moore Road, eliminating weaving issues on I-24,” said Blevins. “It also extends the new lanes on I-75 from Phase I to the East Brainerd Road exit, further improving traffic flow.
According to Blevins, the Hamilton County interchange serves as a critical junction for both passenger and commercial traffic traveling between Nashville, Knoxville and Atlanta. It’s one of the region’s most heavily used corridors.
Phase II work began in 2023. Wright Brothers Construction Company of Charleston serves as general contractor for the ongoing project, where completion of the center lanes on the I-75 bridge over the railroad and the concrete approach lanes is pending. Blevins said work has progressed smoothly, especially considering the scale and complexity of the work involved.
Phase II lane closures have been strategically scheduled during nighttime hours and select weekends to minimize disruption. Motorists have experienced minor delays during peak travel times and have generally been supportive.
“They will benefit from increased capacity, reduced weaving conflicts, streamlined entrance and exit ramps and improved overall traffic efficiency throughout the corridor,” said Blevins.
Blevins also noted that construction access has been one of Phase II’s biggest challenges.
TDOT photo
The Tennessee Department of Transportation (TDOT) is overseeing the design-build effort, with the cost of Phase II work estimated at $162 million.
“This has affected employees, dump trucks, material deliveries, etc. as far as difficulties with ingress/egress of certain areas. Joint lines — matching tie-in points from Phase I — also have been an issue. Some construction limits do not overlap into Phase I, and an in-depth survey is required beyond what is originally provided to ensure a smooth transition between phases.”
Blevins said I-24 bridges, retaining walls, noise barrier walls and drainage are complete. I-24 surface paving, texture coating and I-75 bridge Phase II continue.
Regarding the widening of I-24 from Germantown Road to Spring Creek Road, “This involved multiple traffic phases, in order to construct soldier pile/soil nail walls to retain the tight vicinity of North and South Terraces. This also required enhanced drainage features to direct storm runoff from the widened asphalt surface,” said Blevins.
Other tasks included removing concrete pavement and replacing it with asphalt, replacing the South Moore and McBrien Road bridges and constructing noise barrier walls that line nearly the entire length from Germantown to Spring Creek.
Reconfiguring the entrance and exit ramps to the North and South Terraces involved in-depth studies into the effectiveness of the established traffic control plans to allow for the safety of workers and the traveling public. Closing both entrance and exit ramps between Belvoir and Moore allowed expedited construction and has resulted in a higher quality product, without multiple phase joints in the area.
Roughly 150,000 cu. yds. of dirt are being moved during Phase II. As part of excavation efforts, much of the material excavated was unsuitable to use as borrow in other areas of the project.
TDOT from page 1
Aggregate, concrete, asphalt, pipe, reinforcing steel, steel piles and concrete beams are among the chief materials required to complete the work.
TDOT photo
Wright Brothers Construction Company of Charleston serves as general contractor for the ongoing project.
TDOT photo
NEW! Next Gen Crawler Excavators
Get Bigger Payoffs with Hyundai Next Generation HX Excavators
Powered by Hyundai engines, these new Next Generation HX excavators deliver 22% higher power output than previous versions. This performance is matched by a significant reduction in operating costs, offering up to 9% improved fuel efficiency. Let’s put smarter productivity to work. Talk with a Hyundai dealer near you about performance gains and fuel savings.
See the Hyundai difference yourself at your local dealer or na.hd-hyundaice.com
www.nedealers.com
Apopka-Orlando, FL 407-401-8956
Ft. Pierce, FL 772-212-4043 Tampa, FL 813-940-4405
R.S. Braswell Company Kannapolis 704-933-2269 www.rsbraswell.com
Triangle Equipment Company Morrisville 919-596-1995 www.bobcatgdn.com
Bobcat of Wilson Wilson 252-206-0733 www.whitesequipmentco.com
Bobcat of New Bern New Bern 252-636-1837 www.whitesequipmentco.com
Bobcat of Winterville Winterville 252-756-4055 www.whitesequipmentco.com
Bobcat of Jacksonville Jacksonville 910-347-1646 www.whitesequipmentco.com
TENNESSEE
Bobcat of Dickson Dickson 615-239-0800 www.bobcatgdn.com
Bobcat of Wilson County Lebanon 615-257-5999 www.bobcatgdn.com
Bobcat of Knoxville Knoxville 865-588-8115 www.bobcatgdn.com
Bobcat of Chattanooga Chattanooga 432-698-4679 www.bobcatgdn.com
SOUTH CAROLINA
Bobcat of Columbia Columbia 803-933-9996
www.bobcatgdn.com
Bobcat of Charleston North Charleston 843-725-6330
www.bobcatgdn.com
Bobcat of Greenville Piedmont 864-269-3600 www.bobcatgdn.com
Bobcat of Spartanburg Spartanburg 864-342-9003 www.bobcatgdn.com
Bobcat of Rock Hill Rock Hill 803-670-2003 www.BobcatofRockHill.com
Bobcat of Myrtle Beach Myrtle Beach 843-236-4499 www.bobcatgdn.com
Bobcat of Seneca Seneca 864-408-8400 www.bobcatgdn.com
Bobcat of Florence Florence 843-277-0200 www.bobcatgdn.com
VIRGINIA
Bobcat of Lynchburg Concord 434-352-2401 www.curtis-lane.com
Bobcat of Roanoke Valley Roanoke 540-366-3469 www.curtis-lane.com
Dynapac, Bluelight Drive Innovation at ConExpo 2026
Dynapac North America and Bluelight Machines showcased autonomous compaction solutions to contractors across North America.
The technology was be demonstrated at ConExpo 2026, where Dynapac’s 84-in., 11ton CA2500D Seismic Soil Roller operated in Bluelight Machines’ live autonomous equipment demonstration.
The live demonstration took place in the Festival Lot at Booth F13040, where attendees saw firsthand how Bluelight’s autonomy platform integrates seamlessly with Dynapac compaction equipment in a realworld job site environment.
“Contractors are under intense pressure from workforce shortages, tighter project timelines and rising utilization demands,” said Dick Zhang, president of Bluelight Machines and software co-developer. “By combining Bluelight’s go-to-market-ready autonomy platform with Dynapac’s proven compaction equipment, we’re delivering a practical, scalable solution that is already performing on active job sites today.”
Bluelight Machines’ autonomy platform is currently deployed on active job sites across the United States and internationally, with approximately 75 percent of installations operating in compaction applications.
Dynapac CA2500D seismic roller equipped with the Bluelight autonomous kit at the Scout Plant in Blythewood, S.C.
The company offers retrofit kit options for compaction equipment and haul trucks, supported by a growing distribution network.
“Having Bluelight autonomy available for Dynapac rollers is a major step forward for our customers,” said Jennifer Bishop, director — product marketing and customer
experience of Dynapac North America. “By combining Bluelight’s autonomy platform with Dynapac’s Seismic technology, contractors gain a fully integrated, market-ready autonomous compaction solution that delivers exceptional precision, consistency and performance. Backed by our Dyn@link
telematics platform, we’re seeing engaged contractors improve utilization on soil rollers and realize efficiency gains and increased production. That’s truly game-changing technology!”
For more information, visit dynapac.com/us-en/.
Bluelight photo
DYNAPAC
BOMAG
CATERPILLAR
see CHART page 56
SAKAI Adds TS160-4 Static Pneumatic Tire Roller to Asphalt Compaction Line
To maintain a high-quality mat finish, it is equipped with “superflat” tires, a triple-filtered water system with all-metal spray nozzles and a 43.6-gal. water tank.
Sakai America Inc. announced the availability of the TS160-4, a dedicated 3-ton class static pneumatic tire roller (PTR).
Engineered for precision and maneuverability, the TS1604 is designed to achieve a smooth, uniform asphalt mat and tighten joints during finish rolling. While already in global markets, this model now brings its capabilities to North American job sites.
“The TS160-4 is a welcomed addition to our lineup that fills a practical niche for our customers,” said Brad Belvin, manager of sales and marketing of Sakai America. “It pro vides a truly competitive alternative for contractors looking for a small static tire roller, an area where North American market choices have been relatively limited.”
“Our customers have come to expect market-leading reli ability and performance when they see the SAKAI name,” said Wes Shepherd, vice president of operations of Sakai America. “The TS160-4 will deliver the same high level of quality our users have come to expect from our entire product line.”
This specialized asphalt roller is suitable for smaller paving jobs such as driveways, parking lots, light chip seal duty and municipal asphalt paving. It features a 51-in. compaction width across seven tires and is powered by a 21 hp Kubota diesel engine.
Built for straightforward operation and durability, the compactor uses a mechanical design that requires no DPF, DEF or ECM, paired with analog controls to ensure reliability on the job site and a long life with easy maintenance, according to Sakai.
To maintain a high-quality mat finish, it is equipped with “superflat” tires, a triple-filtered water system with
all-metal spray nozzles and a 43.6-gal. water tank. For ease of use, the roller offers superior maneuverability via rear steering and visibility from a wide bench seat with ambidextrous FNR levers.
This model is built in Japan and is backed by Sakai’s 3year or 3,000-hour warranty with United States-based parts and support in Georgia.
For more information, visit sakaiamerica.com.
www.richmondmachinery.com 2350 Greystone Ct. Rockville, VA 23146 (804) 359-4048
www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 • (404) 361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 (912) 445-2880 708 Gil Harbin Industrial Blvd. Valdosta, GA 31601 (229) 554-3660
2015 Etnyre Centennial II distributor, 2000 gal, BT-1 computer, 12 ft spray bar, propane burners,PTO pump, Ford F750XL, Cummins 6.7L dsl eng, auto trans, 2 spd axle $120,000
Backhoe Road NE Leland, NC 28451 910-371-6301
1245 Bridgestone Blvd. LaVergne, TN 615-256-2424 4545 Columbia Pike Thompson’s Station, TN 615-744-7850 541 Alfred Thun Rd. Clarksville, TN 931-552-5496 667 Horace Lewis Rd. Cookeville, TN 931-646-3200 3565 New Tullahoma Hwy. Manchester, TN 931-461-5000 1291 Corporate Ave. Memphis, TN 901-332-3051
761 HWY 6 West Oxford, MS 662-371-4440 421 Wallace Dr Belden, MS 662-680-8948
3199 S Frontage Rd. Columbus, MS 901-401-7011
500 World Commerce Pkwy St. Augustine, FL 904-737-7730
14300 Ponce De Leon Blvd Brooksville, FL 352-796-4978
401 N Tomoka Farms Rd Daytona Beach, FL 386-947-3363
4900 N Main St Gainesville, FL 352-371-9983
330 Pecan Park Road Jacksonville, FL 904-714-2600
390 SW Ring Ct Lake City, FL 386-755-3997 3425 Reynolds Rd Lakeland, FL 863-606-0512
2887 South Street Leesburg, FL 352-321-3100
6969 US-31 Tanner, AL 256-353-7721 118 Vulcan Way Dothan, AL 334-671-1040
Pinson Valley Pkwy Tarrant, AL 205-841-8601
5749 John Givens Rd Crestview, FL 850-682-6510
6200 North US 301/441 Ocala, FL 352-732-2800 9901 Ringhaver Dr, Orlando, FL 407-855-6195
415 Community College Pkwy SE Palm Bay, FL 321-952-3001
7500 26th Ct E Sarasota, FL 941-359-6000
32000 Blue Star Hwy Tallahassee, FL 850-562-2121 10421 Fern Hill Dr Tampa, FL 813-671-3700
6307 Co Rd 490 Hanceville,
RAISSING THE STANDARD IIN
CHART from page 57
* c= combination ** o=oscillation ***p = padfoot
WACKER NEUSON
BLAW-KNOX
BOMAG
Track Asphalt Pavers
CATERPILLAR
DYNAPAC
ROADTEC
New Volvo SD70 Soil Compactor Brings
Premium Performance in Value Package
Volvo Construction Equipment (Volvo CE) announced the launch of the new SD70 soil compactor, the latest addition to its soil compaction range, at ConExpo-Con/AGG 2026.
Volvo Construction Equipment (Volvo CE) announced the launch of the new SD70 soil compactor, the latest addition to its soil compaction range, at ConExpo-Con/AGG 2026.
Designed to deliver premium performance at a value price, the SD70 is a solution for contractors and rental fleets seeking performance without compromise, according to Volvo.
The SD70 is a 66-in., 7-ton roller that delivers the same drum performance as the SD75, but with a streamlined design for optimal cost efficiency, according to Volvo.
“The market spoke and we listened. The SD70 is the perfect blend of Volvo quality and smart design for operations where every dollar counts,” said Justin Zupanc, compaction product manager of Volvo CE. “With simplified features, low fuel consumption and strong residual value, the SD70 keeps costs down and uptime high. Durable, reliable and easy to service — all backed up by our Volvo standard life time frame guarantee — this is a solid investment for valuedriven operations.”
Boosting Performance, Efficiency
With a drum design shared by the SD75, the SD70 pro vides the same performance that Volvo compactors have built their name on for more than 50 years. The advanced drum control system offers multiple frequencies, dual ampli tudes and optimized centrifugal force for consistent, highquality results across a variety of job conditions.
Under the hood is a 74-hp Volvo Tier IV Final engine that provides torque at low rpm, ensuring performance with low fuel consumption. The engine’s passive regeneration feature enhances productivity by cleaning filters automatically with out impacting performance or requiring operator input.
www.dobbsequipment.com
Supporting Reliability, Uptime
Durability is a central feature of the SD70’s design. The compactor shares heavy-duty components across the Volvo soil compaction range — including the drum, engine, axle and motors — ensuring reliability and performance in demanding environments, according to Volvo.
Ground-level service access simplifies routine maintenance, maximizing uptime and productivity. The lifetime frame guarantee reaffirms Volvo’s commitment to long-term value and quality and provides added peace of mind.
With CareTrack standard telematics or ActiveCare Direct advanced telematics, owners can rely on 24/7 machine monitoring from Volvo’s Uptime Center. Both systems provide weekly performance reports and proactive maintenance alerts to help prevent downtime and reduce repair costs.
For more information, visit volvoce.com/united-states/ en-us/products/compactors/.
The ergonomically designed operator’s platform provides a safe, comfortable and productive working environment with excellent all-around visibility, according to Volvo. With an optional canopy sunshade, fleets can configure the operator environment according to their requirements.
The ergonomically designed operator’s platform provides a safe, comfortable and productive working environment with excellent all-around visibility, according to Volvo.
Dothan, AL • 334-678-1832 Huntsville, AL • 256-851-2222 Mobile, AL • 251-457-8991
www.tec1943.com
Hoschton, GA • 706-654-9850
Kennesaw, GA • 678-354-5533
Macon, GA • 478-745-6891 Savannah, GA • 912-330-7500
AL • 334-288-6580 Tuscaloosa, AL • 205-752-0621 Panama City, FL • 850-763-4654 Pensacola, FL • 850-505-0550 Atlanta, GA • 404-366-0693 Albany, GA • 229-435-0982 Augusta, GA • 706-798-7777 Calhoun, GA • 706-879-6200 Columbus, GA • 706-562-1801
GOMACO Introduces Its New Polymer Paver for Ultra-Thin Overlay Market
GOMACO introduced the polymer paver for the ultra-thin overlay market.
The polymer paver can pave overlays on bridge decks and flat slabs in widths from 6 to 30 ft. The all-welded steel frame sections feature bolted connections, allowing easy width changes. The welded polymer paving pan sections are available in widths to match the frame sections.
Vibration is provided by sectional rotary eccentrics supported by ball bearings. The vibration is coordinated to start and stop with the machine movement. A dual-drive 9 in. variable speed auger spreads the material ahead of the paving pan.
The polymer paver’s power is provided by a 74 hp diesel engine, which eliminates the inconvenience and expense of diesel exhaust fluid (DEF). Four tracks allow for easy operation and loading/unloading. A four-bogie option allows for paving up against a barrier wall.
The polymer paver features the G+
photo The Polymer Paver made its world debut at ConExpo-Con/AGG 2026 in Las Vegas, Nev.
control system for grade and steering. A 10-in. full-color display provides the operator with control over all paving machine functions. The control system is multi-lingual and can toggle between metric and imperial settings. The tethered control display is magnetically mounted and can be positioned where the operator prefers for optimal operator visibility.
The polymer paver made its world debut at ConExpo-Con/AGG 2026 in Las Vegas, Nev., in booth C30282. It was be part of GOMACO’s display of 13 pieces of equipment showcasing the company’s full line of concrete paving and support equipment.
For more information, visit gomaco.com.
Trimble Announces GSSI for Real-Time
Asphalt Compaction Quality Control
Trimble announced that the Trimble Roadworks paving control platform for asphalt compactors will now integrate with Geophysical Survey Systems Inc’s (GSSI) ground penetrating radar sensor, PaveScan RS, providing asphalt compaction metrics with every pass.
With this announcement, Trimble, and its SITECH dealer network, will serve as a key global aftermarket reseller of GSSI’s density profiling sensors (DPS), allowing broader access to DPS across the paving industry.
The integration of high-speed ground penetrating radar with Trimble Roadworks gives asphalt paving contractors a solution for mapping the dielectric profile — or percentage of air voids — throughout the asphalt compaction process rather than by testing core samples after the completion of a project.
This functionality can transform asphalt paving projects by delivering real-time quality control metrics on
every pass, according to The National Center for Asphalt Technology. As a result, contractors can accelerate project timelines and optimize resources to help ensure safer, more profitable and more sustainable outcomes for highways agencies.
“Giving asphalt compactor operators the ability to monitor compaction quality as they go can significantly improve compaction workflows,” said Kevin Garcia, general manager of civil specialty solutions of Trimble. “Now, an operator can ensure that the asphalt density is correct before they leave the area, rather than waiting until the job is done and then drilling holes in the asphalt to test the density.”
The ability to monitor quality throughout the project in real time takes the guesswork out of roller patterns and can significantly reduce the likelihood of rework or fines for work that doesn’t meet compaction specifications. The result is construction of longer-lasting, more sustainable roads
that require less maintenance. In addition, by eliminating the need for coring at the end of the project, this solution means improved on-the-job safety for road crews.
“Until now, the only reliable way to determine the compaction quality of asphalt paving is by cutting cores next to live traffic the following day,” said Curt Turgeon, paving engineer of the Minnesota Department of Transportation, which has been piloting the new Trimble and GSSI integration.
GSSI’s ground penetrating radar technology is known for its accuracy, durability and ability to provide subsurface inspection data non-destructively.
GSSI PaveScan RS sensors for Trimble Roadworks will be available to order through Trimble’s worldwide dealer channel beginning March 2026.
For more information, visit civilconstruction.trimble.com/en/products/mac hine-control-and-guidance/roadworks.
GOMACO
150 Piper Lane Alabaster, AL 35007 (205) 621-2489
5336 Messer-Airport Hwy Birmingham, AL 35212 (205) 591-2131
800 Church St. N.E. Decatur, AL 35601 (256) 355-0305
4307 Reeves Street Highway 431 North Dothan, AL 36303 (334) 678-1832
www.tec1943.com (844) 4 MY DOBBS www.dobbsequipment.com
243 South Jackson St. Grove Hill, AL 36451 (251) 275-4158
108 Skylab Drive NW Huntsville, AL 35806 (256) 851-2222
2100 East I-65 Service Rd. North Mobile, AL 36617 (251) 457-8991
3285 Selma Highway Montgomery, AL 36108 (334) 288-6580
309 Hamric Drive West Oxford, AL 36203 (256) 831-2440
3820 Greensboro Ave. Tuscaloosa, AL 35405 (205) 752-0621
3305 Highway 77 Panama City, FL 32405 (850) 763-4654
9036 Pine Forest Rd. Pensacola, FL 32534 (850) 505-0550
FL 33166 (305) 592-5740 3933 Martin Luther King, Jr. Blvd West Palm Beach, FL 33404 (561) 848-6618 4333 North John Young Pkwy Orlando, FL 32804 (407) 299-1212
3005 Hanson Street Fort Myers, FL 33916 (239) 334-3627 4618 Scarborough Drive Lutz, FL 33559 (813) 995-0841
1730 N. Nova Road Holly Hill, FL 32117 (407) 299-1212 1705 Columbia Lane Melbourne, FL 32904 (321) 234-3344
2710 Falkenburg Road Riverview, FL 33578 (813) 621-4902 - Parts 1751 Copans Road, Unit 8 Pompano Beach, FL 33064 (954) 977-9541 - Parts
6265 E Sawgrass Road Sarasota, FL 34240 (941) 960-2004 - Parts
CHART from page 61
HEM PAVING EQUIPMENT
POWER CURBERS
GOMACO
WIRTGEN
BOMAG
CATERPILLAR
WIRTGEN
5710 Riverview Road SE Atlanta, GA 30126 (404) 696-7210
2238 Pinson Valley Parkway Birmingham, AL 35217 (205) 841-6666
STONE EQUIPMENT CO., INC. www.stoneequipmentco.com 210 West Boulevard Montgomery, AL 36108 844-786-6373 334-625-6585
1800 Culver Road Tuscaloosa, AL 35401 (205) 848-4147
The Carlson CP100 II sets the standard for versatility, component lifecycle and mat quality. With a powerful 100hp engine, an array of configurations and the class-leading EZCSS single slide screed, it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paver platforms.
LINDER TURF & TRACTOR
www.lindertt.com
4737 McConnell Center Drive Greensboro, NC 27405 336-792-3412
1530 Middle River Loop Fayetteville, NC 28312 910-483-3692
1501 N. Memorial Drive
Greenville, NC 27834 252-695-6200
5504 15th Street E Bradenton, FL 34203 941-755-5722
505 US Hwy 82 West Leesburg, GA 31763 229-435-2212
1205 Veterans Pkwy North Moultrie, GA 31788 229-985-3882
2902 US Hwy 84 West Valdosta, GA 31601 229-588-8100
RJV KUBOTA
www.rjvequipment.com Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576 Knoxville 3356 Rudy Street Knoxville, TN 37921 865-970-2840
CREEL TRACTOR CO.
www.creeltractor.com
3771 Palm Beach Blvd. Fort Myers, FL 33916
239-694-2185
Scale Models for Sale
Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays,
Grove ATS540 Tri-Axle Truck Crane, 1:50 scale - $215
6691 Mobile Highway Pensacola, FL 32526 850-944-8110
65 Chandler Street Richmond Hill, GA 31324 912-238-1300 VermeerSoutheast.com
9709 Atlee Commons Dr. Ashland, VA 23005 804-798-2290
2506 S. Military Highway Chesapeake, VA 23320 757-485-4485 5263 Agro Dr., Ste 101 Frederick, MD 21703 301-732-7800
335 Airport Rd., Unit B New Castle, DE 19720 302-501-6900 linkbeltma.com
Women Supporting Women: Sharing Experiences, Advice
you can progress. Talk to people already doing the job, explore hands-on training, stay curious and challenge assumptions — including your own.”
“Accept that the first few months might feel uncomfortable,” she added. “That doesn’t mean you don’t belong. If you walk onto site and you’re the only woman there, don’t shrink yourself. You deserve to be there as much as anyone else and you are as trained and competent as anyone else.”
At the ConExpo-Con/AGG EmpowerHER workshop, she emphasized the importance of bringing women into the field and keeping them in the field.
“We’ve made some progress getting women into construction, but we haven’t made the same progress keeping them here,” she said. “Recruitment is only half the story — retention is where the real work is. It shouldn’t only be on women to be braver. The industry has a responsibility to make itself a place worth stepping into.”
While she acknowledged there’s no single solution to a culture shift, she believes creating supportive cultures, promoting women role models, increasing visibility, addressing fundamental simple issues — such as site facilities available to women,
PPE sized appropriately for women as well as flexible working arrangements — and bridging the “health and safety” gap can help break down the intimidation and barriers women face entering into the field.
Jennifer Todd, executive director of A Greener Tomorrow
Jennifer Todd, an accoladed founder and executive director for a nonprofit known as A Greener Tomorrow, has devoted her career to advancing equity, workforce development and representation in the construction field. With nearly two decades in the field, she offers extensive knowledge in federal disaster recovery, strategic planning and workforce development.
Todd recently received prestigious awards from the Top 20 Under 40 and was named a finalist for CBO Outstanding Women in Construction and an honoree for the South Florida Business Journal Diverse Voice.
When Todd isn’t leading her nonprofit, speaking at events, or producing her docuseries known as “Breaking Barriers: Women at Work,” Todd serves on numerous advisory groups and organizations, including the American Society of Civil Engineers, National Association of Black Women in Construction, John Deere and
CREW Collaborative.
At the ConExpo-Con/AGG EmpowerHER Workshop, Todd shared many insights, including a framework she developed known as the “Doubt Tax.” Rather than battling internal challenges, such as imposter syndrome, while working in the field, Todd explained in the construction world women mostly face external challenges.
She told Construction Equipment Guide, “The ‘Doubt Tax’ is an external cost women in male-dominated industries pay in environments that were not originally designed with them in mind. It’s not about individual resilience; it’s about structural retention.”
She noted that although “construction is one of the most opportunity-rich industries in the country right now … less than 14 percent of women represent the workforce,” and calls for companies to perform leadership audits, in efforts to mitigate the workforce shortage and challenges women face in the field.
Despite the “Doubt Tax,” Todd strongly advocates women to enter into the field. To young women aspiring to kickstart their career in the construction industry, she encourages them to explore trade programs, apprenticeships and to join local contractor
associations.
To the women looking to shift industries, she said, “Construction needs leaders with transferable skills: operations, finance, project management, communications, technology, strategy. If you can lead under pressure, manage risk, solve complex problems, or build systems you already have currency here.”
Lastly, Todd advised, “Do not assume you must assimilate to succeed. The future of this industry depends on new perspectives, not smaller versions of the same ones.”
Industry of Growth, Change
These three determined leaders have committed their careers to empowering other women to enter into and grow in a challenging but rewarding field. The EmpowerHER Workshop this year at ConExpo-Con/AGG gave these women a platform to network, collaborate and share best practices and insights. Overall, these efforts work toward fostering a more inclusive environment for women to work, lead and innovate in the field — all while shaping the future of the construction industry. CEG
Crews Need to Match Phase I Tie-Ins to Phase II Work
“A portion of the project required borrow material and riprap as fill in areas that retained subsurface water,” said Blevins. “Due to heavy traffic, excavation areas were sequenced to maintain production, as many areas were unavailable at any given time with the current traffic phasing.”
As for the widening of I-75 from west of the CSX Railroad overpass to the East Brainerd Road interchange, demolition and reconstruction of the bridge over CSX Railroad was necessary to accommodate a fifth lane in each direction and new vertical clearances over the railroad. Placement of concrete pavement to allow the fifth lane and match the new vertical alignment was also necessary, as was realignment of the East Brainerd entrance ramp to I-75 southbound.
Replacing the I-75 bridge over the CSX railroad involved shifting traffic to the median and constricting I-75 to three lanes in each direction. Crews had to demo the
existing bridge outside of traffic and shift vehicles to the newly constructed portion of the bridge in both directions. Work also included demolishing and reconstructing the interior portion of the bridge and tying into the recently constructed first phase.
Blevins stressed that rubblization was a major factor in the expedited delivery of the project.
“This alternative allowed the existing concrete to serve as a base layer for the new asphalt in fill areas. Rubblization had minimal impact on noise and eliminated the need for excavation in several areas. In addition, barrier walls play a key role in reducing the noise of the remaining construction activities.”
Heavy equipment used during
Phase II includes excavators, dozers, motor graders, dump trucks, rollers, loaders, skid steers, cranes, manlifts, pile drivers, drills, concrete screeds, bucket trucks, guardrail post drivers, trenchers, boring machines, brooms, asphalt pavers and shuttle buggies.
Aggregate, concrete, asphalt, pipe, reinforcing steel, steel piles and concrete beams are among the
chief materials required to complete the work.
Blevins also remarked that the elements can have a drastic effect on construction.
“Grading, asphalt paving and concrete placement are greatly weather-dependent. Most items of work can be completed during the winter months, whilst keeping in mind temperature constraints on concrete placement and asphalt paving surface layers. Production is impacted by heavy frosts and winter weather. Lower temperatures do not allow moisture on the ground to deplete as quickly as other seasons of work.”
As crews head into the final stretch, Blevins said it’s rewarding to witness the amount of progress made on the project.
“We take tremendous pride in knowing we are serving hundreds of thousands of commuters every day. Allowing the public to travel safer and quicker to their destination than when we first mobilized is a large accomplishment.”
CEG
TDOT from page 40
Joint lines — matching tie-in points from Phase I — have been an issue. TDOT photo
1241 Salem Park Court Murfreesboro, TN 37129 615-809-3377
www.tristarjcb.com
WesPro JCB
1501 Atlanta Industrial Drive Atlanta, GA 30331 678-402-6867
www.wesprojcb.com
Dobbs Equipment
www.dobbsequipment.com
Dothan, AL
334/794-8691
Troy, AL
334/566-4181
Riverview, FL (HQ)
813/620-1000
Miami, FL
305/592-5740
West Palm Beach, FL
561/848-6618
Orlando, FL
407/299-1212
Fort Myers, FL
239/334-3627
Lutz, FL
813/995-0841
Daytona, FL
407/299-1212
Riverview, FL
813/621-4902
Pompano Beach, FL
954/977-9541
Sarasota, FL
941/960-2004
Melbourne, FL
321/234-3344
Adairsville, GA
770/773-9857
Albany, GA
229/888-1212
Atlanta, GA
404/691-9445
Braselton, GA
770/965-1889
Brunswick, GA
912/264-6161
Columbus, GA
706/687-3344
Grovetown, GA
706/855-5440
Macon, GA
478/788-1586
Savannah, GA
912/964-7370
Valdosta, GA
229/474-6680
Andrews, SC
843/221-4940
Aynor, SC
843/358-5688
Ladson, SC
843/572-0400
Simpsonville, SC
864/963-5835
Walterboro, SC
843/539-1420
West Columbia, SC
803/794-9340
BOOST EFFICIENCY — NOT EFFORT
TN 615/501-8600
Latest Equipment, Technology On Display at ConExpo
DEVELON, Suwanee, Ga., debuted its new DX400LC-9 excavator — the largest of DEVELON’s next-gen lineup. Unveiled at ConExpo 2026, it is a 95,000-lb., 340.6 gross hp machine.
CONEXPO from page 27
The expanded lineup helps industry professionals connect with others who understand their daily challenges and opportunities.
• Shop Talks & Walks: Hands-on training focused on preventive maintenance, fleet efficiency, and real-world equipment solutions.
• EmpowerHER Workshop: Held in celebration of Women in Construction Week 2026, these sessions connected women industrywide for mentorship and inspiration.
• Small Business Workshop: Dedicated to helping small business owners and family-run firms strengthen operations and build partnerships.
“This show brings people together to learn about the latest equipment and technology while also sharing ideas on how to recruit and train the next generation of workers,” said Adonis Smith of IUOE Local 478.
Looking Ahead
As the industry continues to evolve, ConExpo-Con/AGG remains the premier destination for discovering solutions, building partnerships and preparing for the demands of tomorrow’s jobsites.
The next ConExpo-Con/AGG will return March 13-17, 2029, continuing its tradition of bringing the global construction industry together to drive progress.
For more information, visit conexpoconagg.com.
(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)
Twenty new or completely re-engineered product offerings were on full display at the SANY exhibit including a couple of exiting new crane models.
Kinney (L) of Pemberton Attachments, Longwood, Fla., had a busy week promoting the complete line-up of
This new Vögele Super 2003-5 paver was launched at ConExpo 2026. This model features laydown rates of up to 1.54 tons per hour and are designed for high-speed paving, according to the company.
Rototilt offers a range of tiltrotators to fit a variety of excavator sizes from 1.5 to 43 tons.
The calm before the big competition. On the day before the Cat Global Operator Challenge finals, equipment stands ready for the world’s best operators to ply their skills.
John
Pemberton products.
Peter Ovrebo of Yanmar Compact Equipment North America, Grand Rapids, Minn., was ready to introduce the ASV TL25 RP compact track loader.
LINDER INDUSTRIAL MACHINERY
www.linder.com
Florida
Bradenton • 941/755-5722
Ft. Myers • 239/337-1313
Jacksonville • 904/786-6710
Ocala • 352/629-7585
Orlando • 407/849-6560
Pembroke Pines • 954/433-2800
Plant City • 813/754-2727
West Palm Beach • 561/863-0570
North Carolina
Asheville • 828/681-5172
Charlotte • 980/777-8345
Fayetteville • 910/483-3892
Greensboro • 363/792-3412
Greenville • 252/695-6200
Raleigh • 919/851-2030
Wilmington • 910/254-2031
South Carolina
Columbia • 803/794-6150
Greer • 864/877-8962
Myrtle Beach • 843/486-8090
North Charleston • 843/486-8080
Virginia
Bealeton • 540/439-0668
Chesapeake • 757/485-2100
Chester • 804/748-6411
Fishersville • 540/887-8291
Salem • 540/380-2090
POWER EQUIPMENT
www.powerequipco.com
Chattanooga, TN • 423/894-1870
Kingsport, TN • 423/349-6111
Knoxville, TN • 865/577-5563
LaVergne, TN • 615/213-0900
Memphis, TN • 901/346-9800
Saltillo, MS • 662/869-0283
Little Rock, AR • 501/823-4400
Springdale, AR • 479/927-1672 TRACTOR &
www.tec1943.com
Alabama
Alabaster • 205/621-2489
Anniston • 256/831-2440
Birmingham • 205/591-2131
Decatur • 256/355-0305
Dothan • 334/678-1832
Huntsville • 256/851-2222
Mobile • 251/457-8991
Montgomery • 334/288-6580
Tuscaloosa • 205/752-0621
Florida
Panama City • 850/763-4654
Pensacola • 850/505-0550
Georgia
Albany • 229/435-0982
Atlanta • 404-366-0693
Augusta • 706/798-7777
Calhoun • 706/879-6200
Columbus • 706/562-1801
Hoschton • 706/654-9850
Kennesaw • 678/354-5533
Macon • 478/745-6891
Savannah • 912/330-7500
www.wpi.com
Louisiana
Alexandria • 318/408-3099
Baton Rouge • 225/800-3711
Kenner • 504/467-5906
Broussard • 337/362-4331
Bossier City • 318/746-5272
Sulphur • 337/287-9455
dynamicequipmentgroup.com
Daytona Beach, FL
386-274-1002
Fort Myers, FL
239-334-4987
Lakeland, FL
863-250-8762
Miami, FL
305-362-6632
Orlando, FL
407-273-7383
Sarasota, FL 941-248-3040
Stuart, FL 561-264-3287
Tampa, FL 813-626-3470
equipmentinc.com
Mobile, AL
251-443-5533
Hattiesburg, MS
601-296-2546
Richland, MS 601-948-3272
Alexandria, LA
318-491-8414
Shreveport, LA 318-674-8824
Texarkana, TX 903-838-4508
Serving Arkansas
ironpeddlers.com 201 West Frieght Road Florence, SC 29501 843-236-2226
209 E. Victor Rd. Duncan (Greenville), SC 29334 864-409-1143
3300 Dozer Lane • Knoxville, TN 37920 865-577-5563 4295 Bonny Oaks Dr. • Chattanooga, TN 37406 423-894-1870 1487 Rock Springs Rd. • Kingsport, TN 37664 423-349-6111 3050 Ferrell Park Cove • Memphis, TN 38116-3502 901-346-9800 1545 Highway 45 • Saltillo, MS 38866 662-869-0283
2801 W 65th Street • Little Rock, AR 72209 501-823-4400
781 E Randall Wobbe Lane • Springdale, AR 72764 479-927-1672
Durham, Chapel Hill 5428 Highway 96 • Youngsville, NC 27596 919-556-9110 Fuquay-Holly Springs-Sanford-Fayetteville 836 North Broad St. • Angier, NC 27501 919-935-0505 5886 Ernest Taylor Rd. • Ayden, NC 28513 252-712-1033
Attention Contractors!
Post Your Wanted To Buy Listings FREE!
Here’s How!
List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.constructionequipmentguide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted
WANTED: JOHN DEERE 850K LGP
CRAWLER DOZER, SIX WAY ENC CAB WITH WINCH UNDER REAL HOURS METER AND FRAME 3000 HOURS OR 850JLGP SAME WAY WITH WINCH UNDER $95000 CDN YEAR 2009 – 2018.
WANTED: LARGE PORTABLE OR STATIONARY GENERATORS IN ANY CONDITION. ALL MODELS: CAT, CUMMINS, DETROIT, MTU, PERKINS, VOLVO (DIESEL OR NATURAL GAS). CAN REMOVE IF NEEDED.
WANTED: JOHN DEERE 850J LGP CRAWLER DOZERS. WANT TO BUY BULLDOZER 850JLGP SIX WAY ENC CAB WITH WINCH 2005 AT 2012 REAL HOURS UNDER 900. THANKS, YOU HAVE MY EMAIL FOR PICTURE. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA
WANTED: PART FOR CATERPILLAR CRAWLER DOZER - 943 CAT SPRING FOR TRACK ADJUSTER PART# 7P1675, SERIAL # 19Z00380. PETE 631-774-1905
EMAIL: LIEARTH3@AOL.COM; PHONE: PETE @ 631-774-1905.
WANTED (WORLDWIDE): LIEBHERR WHEEL LOADER.
EMAIL: MABAT_560@YAHOO.CO.UK
WANTED (WA): CATERPILLAR BACKHOE LOADERS+. LOOKING TO BUY USED EQUIPMENT IN THE FOLLOWING CATEGORIES: KOMATSU LOADERS
WA200, WA270 WITH QUICK COUPLERS, LOW HOURS, GOOD PRICE; KOMATSU EXCAVATORS 138-8+ AND CAT 320 CL/DL/EL (ANY HOURS, ANY CONDITION; CAT GRADERS 140G/140H (1990 OR NEWER); CAT BACKHOES C/D/E/F SERIES; CASE BACKHOES - JD 310G – SG; OTHER CAT LOADERS, GRADERS, AND EXCAVATORS. PLEASE PROVIDE YEAR, HOURS, CONDITION, LOCATION, AND PRICE.
WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. WANT TO BUY KOMATSU BULLDOZER 475A-5 OR 475A-8 WITH BIG BLADE TO PUSH WOOD. UNDER 6000 HOURS, REAL HOURS METER AND FRAME. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 450-346-8975
WANTED (US): BOMAG PADFOOT COMPACTORS, ALL MODELS. LOOKING TO BUY FOR AN EROPS 84'' PADFOOT COMPACTOR (ANY MAJOR BRAND). EMAIL: EQUIPMENTDESTINY@GMAIL.COM
WANTED (WORLDWIDE): WESTERN RETEK CRUSHERS, ALL MODELS; LOOKING FOR ANY SPARE PARTS FOR A 2006 WESTERN RETEK IMPACT CRUSHER 1310I.
WANTED (WORLDWIDE): CATERPILLAR 140K MOTOR GRADER. EMAIL: MBUSIINGE@YAHOO.COM; PHONE: 077-791-2153
WANTED (OH): CASE 580SM2 BACKHOE LOADERS. EMAIL:JERRY@VIOXEXCAVATING.COM ; PHONE: 513-460-3315
WANTED (WORLDWIDE): VERMEER RTX 750 / RTX8550 EQUIPPED WITH A LARGE CUTTING WHEEL.
EMAIL:
RENATO.NASCIMENTO@ELEBBRE.COM
PHONE: +55 11 994602266
WANTED (US): CATERPILLAR 140G MOTOR GRADERS, LOOKING TO PURCHASE A RANGE OF HEAVY CONSTRUCTION EQUIPMENT AND WOULD APPRECIATE RECEIVING YOUR BEST OFFERS FOR THE FOLLOWING MODELS, RUNNING OR NON-RUNNING: CAT WHEEL LOADERS: 950B 950E 966E 966F HITACHI EXCAVATORS: EX200LC EX270LC EX300LC EX330LC EX400LC EX450LC-5 JOHN DEERE WHEELED EXCAVATORS: 495D 595D CAT MOTOR GRADER: 140G CAT AND CASE BACKHOES VÖGELE PAVERS: S1800 S1900 CEDARAPIDS ROLLERS/PAVERS. EMAIL: ILYAS.MTCPK@GMAIL.COM
PHONE: 0923322489350
WANTED (US): JOHN DEERE 850K SMARTGRADE CRAWLER DOZERS, BULLDOZER 850KLGP JOHN DEERE SMART GRADE «3D« ENC CAB WITH WINCH 36 INCHES SIX WAY UNDER 1200 HOURS REAL HOURS METER AND FRAME NO JUNK NO WEB MUST BE USER«CONTRACTOR« OR PAYMENT OUT« OR SUCCESSION.
EMAIL:
JEANMAURICEBOUTIN@VIDEOTRON.C A PHONE: 450-346-8975
WANTED (WA): CATERPILLAR EXCAVATORS, MODELS 320C, 320D, AND 320E.
EMAIL:
JAN@GOLDENHORSEMACHINERY.CO MPHONE: 425-217-6188
WANTED (US): CATERPILLAR D8K CRAWLER DOZERS. TRYING TO LOCATE D8K DOZER WITH SPACER PLATE ENGINE, RIPPER AND PUSH BLADE.
EMAIL: IUKANDCO@GMAIL.COM
WANTED (US): CATERPILLAR TH62 TELEHANDLER. LOOKING FOR A BROKEN, NON-RUNNING CATERPILLAR TH62 TELEHANDLER. I HAVE ONE AND WOULD LIKE TO BUY ONE FOR PARTS.
EMAIL: CRAIGBERENS944@GMAIL.COM
PHONE: (6I6) 8I3-3642
WANTED (KS): VERMEER TRACK TRENCHER.
EMAIL:
STATELINEDIG@DIODECOM.NET
PHONE: 402-806-0073
WANTED (US): KOMATSU D475A-5, CRAWLER DOZER. NEED BULLDOZER 475A 5 WITH RIPPER OR SS RIPPER 2016 AND UP.
EMAIL:
JEANMAURICEBOUTIN@VIDEOTRON.CA
PHONE: 1-450-346-8975
WANTED (US): CASE BACKHOE LOADERS, 580 SUPER M AND SUPER L MODELS.
EMAIL: FRANKHORAN@GTMIDATLANTIC.COM
PHONE: 1-800-654-USED
WANTED (VT): CASE 650L LGP
CRAWLER DOZER. ENC. CAB, UNDER 900 HOURS, 27.5 INCH PADS.
EMAIL:
JEANMAURICEBOUTIN@VIDEOTRON.CA
PHONE: 450-346-8975
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number.
• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $140 per ad, $65 additional for color.
• Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By
ALEX LYON & SON AUCTIONEERS
www.lyonauction.com
Auctions are subject to change, please check Auctioneers websites for details Coming Auctions
For: East Coast Construction & Transportation Auction
• Methuen, MA
Sat., March 28, 2026
For: George Cairns & Sons, Inc Retirement Auction
For: Ag Equipment Auction
• Online
Thurs., March 19, 2026
For: Truck & Trailer Auction
• Online
Tues., March 24, 2026
For: Kansas Department of Transportation Auction
• Online
Wed., March 25, 2026
For: Vehicles & Equipment Auction
• Online
Thurs., March 26, 2026
For: Construction Equipment Auction
• Online
Tues., March 31, 2026
For: Government Auction
SHERIDAN REALTY & AUCTION COMPANY
www.sheridanauctionservice.com 517-676-9800
• Online Only
Tues., March 24, 2026
For: Russell Pelham Retirement Auction
SHETRON AUCTION & EQUIPMENT LLC
www.shetronequipment.com 717-532-8828
• Shippensburg, PA Wed., March 25, 2026
For: Construction & Farm Equipment Auction
VANTAGE AUCTIONS
www.vantageauctions.com 951-228-9040
• Elsinore, CA Sat., March 21, 2026
For: Heavy Equipment, Commercial Truck & Trailer Auction
YODER & FREY
PURPLE WAVE AUCTION
www.purplewave.com 866-608-9283
• Online
Wed., March 18, 2026
HEAVY EQUIPMENT AUCTIONS
www.yoderandfrey.com 419-865-3990
• Atlanta, GA
Thurs., March 19, 2026
For: Heavy Equipment Auction
ASSOCIATED GENERAL CONTRACTORS (AGC)
AGC Events Calendar:
All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.
• AGC EDGE Building Information Modeling Education Program, 3rd Edition
Start Date: Monday, April 6, 2026 (9:00 AM)
End Date: Thursday, April 9, 2026 (5:00 PM)
Online Virtual
Training/Professional Development
• AGC’s Construction Project Manager Course
Start Date: Sunday, April 12, 2026 (4:00 PM)
End Date: Friday, April 17, 2026 (2:00 PM) Atlanta, GA
Training/Professional Development
• Focused Topics in Construction (FTC)
Start Date: Mon, April 13, 2026 (7:30 AM)
End Date: Thurs, April 16, 2026 (5:00 PM)
Arlington, VA
Safety and Health
• AGC Mental Health & Suicide Prevention Forum
Date: Wednesday, April 15, 2026 (2:00 PM – 3:00 PM)
Safety and Health
• AGC EDGE Blueprint Reading Basics
Start Date: Wednesday, April 15, 2026 (2:00 PM)
End Date: Thursday, April 23, 2026 (5:30 PM)
Online, Virtual
Training/Professional Development
ASSOCIATED GENERAL CONTRACTORS OF AMERICA (AGC)
AGC ANNUAL CONVENTION 2026
Start Date: Monday March 23, 2026
End Date: Thursday, March 26, 2026
Location: Hyatt Regency Orlando 9801 International Drive Orlando, FL 32819
Phone: 407/284-1234
The Associated General Contractors of America (AGC) is the leading association for the construction industry, representing over 33,000 member firms, including general contractors, specialty contractors, and service providers.
AGC provides a full range of services to its members, aiming to improve the quality of construction and protect the public interest.
The AGC Florida Annual Convention 2026 is scheduled to take place from March 23 to March 26, 2026. This event will be held at the Hyatt Regency Orlando, Orlando, Florida.
This event is expected to attract over 1,800 attendees and 60+ exhibitors. The convention will feature a variety of activities, including keynote speakers, breakout sessions, and networking opportunities. It is a significant gathering for contractors of all sizes and markets, providing an excellent platform for industry connections and knowledge building.
For more information:
Associated General Contractors of America (AGC)
Phone: 703/548-3118
Fax: 703/842-8817 Website: https://www.agc.org
AMERICAN CONCRETE INSTITUTE (ACI)
ACI CONCRETE CONVENTION
Start Date: SUNDAY, MARCH 29, 2026
End Date: WEDNESDAY, APRIL 1, 2026
Place: HYATT REGENCY O’HARE
9300 Bryn Mawr Avenue, Rosemont, IL 60018
Phone: 833/372-2616
The World’s Gathering Place For Advancing Concrete! About ACI:
The American Concrete Institute (ACI) is a leading authority and resource worldwide for the development, distribution and adop-
tion of consensus-based standards, technical resources, educational programs, and proven expertise for individuals and organizations involved in concrete design, construction, and materials, who share a commitment to pursuing the best use of concrete.
Registration is open for the Spring 2026 ACI Concrete Convention.
Discounted rates are available until March 27, 2026. The convention boasts a comprehensive schedule with 300+ committee meetings, 60+ technical sessions, an industry trade exhibition, networking events, and much more!
Educators – Explore this area of the website to learn about the numerous resources and programs ACI offers.
Engineers – From membership to continuing education to some of the industry’s most-used publications, ACI has resources for engineers around the world.
Students – Learn about how ACI can impact your career and the industry, with free or discounted access for students to ACI resources and services.
For more information about the ACI Concrete Convention and to register, visit www.aciconvention.org
WEST VIRGINIA COAL ASSOCIATION
2026 WEST VIRGINIA COAL SHOW
Start Date: Tuesday, March 31, 2026
End Date: Wednesday, April 1, 2026
Location: Charleston Coliseum & Convention Center 200 Civic Center Drive, Charleston, WV 25301
Phone: 304/345-1500
Building a truly great coal show in the heart of America’s coal country.
The coal country is changing and now is the time for coal shows to change, too!
This event is a significant gathering for the coal industry, offering exhibitors and attendees a platform to network, team and showcase their products to all mining professionals.
Additionally, the event will include the Annual Mountaineer Guardian Safety Awards and Environmental Excellence Awards Luncheons and Hall of Fame Induction Ceremony.
The West Virginia Coal Show 2026 is offering exhibitors better
prices, better attendance, a better marketing plan, and great service.
The future of coal is being decided now, and the West Virginia Coal Show is a crucial event to attend. For more information: West Virginia Coal Association Phone: 304/342-4153. Website: https://www.wvcoal.com
HAYDEN-MURPHY EQUIPMENT COMPANY
Paving & Compaction Training
Join Hayden-Murphy for this in-depth training session covering the latest technology and standards in the paving and compaction industry.
Our expert instructors will provide actionable insight into machine calibration, thermal integration, mastering optimal mat smoothness and more!
LOCATIONS: DULUTH, MN
Date: Tuesday, March 31, 2026
Time: 9:00 AM – 3:00 PM
Place: Hampton Inn Duluth – Canal Park 310 Canal park Drive, Duluth, MN 55802
BLOOMINGTON, MN
Date: Wednesday, April 1, 2026
Time: 9:00 AM – 3:00 PM
Place: Renaissance Minneapolis Bloomington Hotel 5500 American Blvd West, Bloomington, MN 55437
Date: Thursday, April 2, 2026
Time: 9:00 AM – 3:00 PM
Place: Renaissance Minneapolis Bloomington Hotel 5500 American Blvd West, Bloomington,
ADVERTISER INDEX
Dothan, AL
334/794-8691
Troy, AL
334/566-4181
Riverview, FL (HQ)
813/620-1000
Miami, FL
305/592-5740
West Palm Beach, FL
561/848-6618
Orlando, FL
407/299-1212
Fort Myers, FL
239/334-3627
Lutz, FL
813/995-0841
Daytona, FL
407/299-1212
Riverview, FL
813/621-4902
Pompano Beach, FL
954/977-9541
Sarasota, FL
941/960-2004
Melbourne, FL
321/234-3344
Adairsville, GA
770/773-9857
Albany, GA
229/888-1212
Atlanta, GA
404/691-9445
Braselton, GA
770/965-1889
Brunswick, GA
912/264-6161
Columbus, GA
706/687-3344
Grovetown, GA
706/855-5440
Macon, GA
478/788-1586
Savannah, GA 912/964-7370
Valdosta, GA
229/474-6680
Andrews, SC
843/221-4940
Aynor, SC
843/358-5688
Ladson, SC
843/572-0400
Simpsonville, SC
864/963-5835
Walterboro, SC
843/539-1420
West Columbia, SC
803/794-9340
HELPING YOU CRUSH IT
JohnDeere.com/Loaders
Freeport,
Ocala,
Pensacola,
Start the year with new Hitachi construction equipment from Hills Machinery — where contractors get tough, production-focused machines backed by Hills Uptime Services, standard on all new equipment. Get real-time machine monitoring, proactive preventive maintenance alerts, and downtime prevention alerts that keep your fleet running and your crews on schedule and on budget. Only at Hills. Call your local Hills or visit hillsmachinery.com.
