Southeast_21_2010 by Construction Equipment Guide

Inside

Linder Hosts Open House at New Facility…8

Case Launches New N Series Backhoes…14

Alex Lyon Holds Sale in Atlanta…66

Page 2 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MOBRO MARINE, INC. 606 S. R. 16 East, Green Cove Springs, FL 32043

904-284-9670 Fax: 904-358-8706

Email: ncorrado@mobromarine.com

2003 Hitachi Sumitomo 2007 Kobelco CK1000 HD

2007 Kobelco CK1000

2009 Kobelco CK2500-II

American 5299

American 7250

Link Belt LS98

Cat 375

Barge 607

N35

Amer 5530

Mobro Dredge IMS

Mobro ExNavy Landing Tugs

Mobro Tug 1

Mobro Tug 2

Mobro Tug 3

American 4450

Mobro Doubletime Crewboat

CRANES

2003 Hitachi Sumitomo 240 ton Hydraulic crawler crane – 220’ main boom, 4 sheave block, ball ............................................................................................................................$$1,100,000 2009 Kobelco CK 2500II – low hours, 250 ton crawler crane w/200’ boom, freefall drums, block and ball ............................................................................................................$$1,550,000 2007 Kobelco CK 1000III – low hours, 100 ton crawler crane w/150’ boom, 3 drums, freefall, block and ball ..............................................................................................................$$695,000 2007 Kobelco CK1000III HD – low hrs, 100 ton crawler crane w/150’ boom, 3 drums, freefall, block and ball ..............................................................................................................$$705,000 7250 American 60 ton crawler crane – 100’ boom, block and ball ..............................$$75,000 5530 American truck crane, 75 ton capacity – 150’ boom and 40’ jib, block and ball..$$95,000 4450 American truck crane, 35 ton capacity – 100’ boom, block and ball ..................$$75,000 5299 American 50 ton crawler crane – 100’ boom, block and ball ............................$$150,000 1987 Linkbelt LS 98, 40 ton crawler crane – 70’ boom, block and ball ....................$$140,000

Special Sale:

2009 Kobelco CK2500, Low Hours, 240’ Boom, 3rd Drum ....................Call for Price SALES & RENTALS

EXCAVATOR

1996 Caterpillar 375L Hydaulic Excavator – 3 buckets and quick coupler. Buckets included: Hawco clamshell, 4 yd digging, 2 yd ditching and quick coupler ................................$$185,000

BARGES – TUG BOATS – DREDGE

Tug “Troy” 29’X13’X5’ steel hull w/ twin engine 6v71 Detroit Diesel ......................$$215,000 Ex- Navy LCM landingcraft tugs - Cummins(new engines) ..........................................$$95,000 (Ambush and Gunsmoke) - Detroit(used engines) ........................................................$$85,000 “Doubletime” crewboat 24’X8’ Aluminum hull ............................................................$$35,000 Tug “Scuffy” 23.7’X20’X5.8’ Steel hull w/twin 6v71 Detroit Diesel ..........................$$225,000 Tug “Bogy” 100’X28’X7.8’ Steel hull w/single engine and generators ....................$$575,000 B a r g e “ A l a b a m a ” 140’X65’X9’ Steel hull barge w/two 36” round spudwells ......$$200,000 Barge “Jax III” 120’X40’X8’ Steel hull barge w/ two round spudwells ....................$$150,000 Barge “mobro 910” 135’X44’X8’ Steel hull barge w/two square 24” spudwells ....$$175,000 Barge “Dixie 4409” 195’X35’X10’ Steel hull barge ..................................................$$200,000 Dredge IMS 4010HT 24’X8’ ..........................................................................................$$85,000 Barge FS 27 250’X50’X16’ Steel hull barge ..............................................................$$875,000 Barge “607” 110’X32’X9’ Steel hull barge ................................................................$$150,000 Barge “608” 110’X32’X9’ Steel hull barge ................................................................$$150,000 Barge “609” 110’X32’X9’ Steel hull barge ................................................................$$150,000 Barge “N35” 50’X18’X4’ Steel hull barge ....................................................................$$40,000

NORTH FLORIDA’S NEW KOBELCO CRANE DEALER YOUR “ONE-STOP” SOURCE FOR ALL YOUR MARINE CONSTRUCTION EQUIPMENT

NOW SELLING & SER VICING KOBELCO CRANES

C a l l N e i l C o rr a d o : 8 6 6 - 3 1 3 - 9 6 7 0 o r 9 0 4 - 2 8 4 - 9 6 7 0 • C e l l : 9 0 4 - 5 7 1 - 9 2 7 0

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 3

Your VOLVO dealer in The Carolinas • Georgia • Alabama • East Tennessee ASPHALT/PAVING/CONCRETE EQUIP. 2007 INGERSOLL-RAND PF2181, 1196 Hrs............................................$$225,000 1999 BLAW-KNOX PF161, 9715 Hrs ........................................................$$27,000 2007 VOLVO PF6170, 994 Hrs ................................................................$$255,000

COMPACTION-PADFOOT 2007 BOMAG BW145PDH-3, 157 Hrs ......................................................$$61,000 (2) 2007 BOMAG BW177PDH-3, 130-224 Hrs............................$$72,000-$78,500 2007 BOMAG BW211PD-40, 791 Hrs........................................................$$79,000 2007 BOMAG BW211PD-40, 751 Hrs........................................................$$77,000 2007 INGERSOLL-RAND SD77DX, 168 Hrs ..............................................$$72,500 2006 INGERSOLL-RAND SD122F, 24 Hrs..................................................$$97,000 2007 VOLVO SD45F, 9 Hrs ........................................................................$$69,000 2006 VOLVO L60E, Stk# 1010420T, 2205 Hrs ..........................................$$78,000

WHEEL LOADERS

(2) 2008 VOLVO L20B, 548-649 Hrs ..................................................$$52,000 Ea. 2007 VOLVO L25, 1617 Hrs ......................................................................$$38,000 2005 VOLVO L45B, 4075 Hrs ....................................................................$$42,000 2009 VOLVO L60E, 731 Hrs ....................................................................$$128,000 2009 VOLVO L60F, 1037 Hrs ..................................................................$$115,000 (2) 2005 VOLVO L70E, 6322-14501 Hrs ....................................$$50,000-$85,000 (4) 2009 VOLVO L70F, 675-2186 Hrs ....................................$$132,000-$142,000 2004 VOLVO L90E, 10384 Hrs ..................................................................$$86,000 2006 VOLVO L90E, 10649 Hrs ..................................................................$$82,500 2007 VOLVO L90F, 2180 Hrs ..................................................................$$133,000 2008 VOLVO L90F, 180 Hrs ....................................................................$$168,000 2009 VOLVO L90F, 1488 Hrs ..................................................................$$152,000 2007 VOLVO L110F, 2350 Hrs ................................................................$$130,000 2008 VOLVO L110F, 4756 Hrs ................................................................$$136,000 2009 VOLVO L110F, 2102 Hrs ................................................................$$170,000 2008 VOLVO L120F, 1414 Hrs ................................................................$$215,000 2009 VOLVO L120F, 6 Hrs ......................................................................$$225,000 2010 VOLVO L120F, 229 Hrs ..................................................................$$250,000 2007 VOLVO L150F, 6826 Hrs ................................................................$$167,500 2008 VOLVO L150F, 1752 Hrs ................................................................$$240,000 (2) 2009 VOLVO L150F, 1794-1884 Hrs ................................$$260,000-$270,000 2010 VOLVO L180F, 1052 Hrs ................................................................$$345,000

COMPACTION-SMOOTH DRUM 2007 BOMAG BW124DH-3, 5 Hrs..............................................................$$51,000 2007 BOMAG BW145D-3, 114 Hrs ............................................................$$53,000 2007 BOMAG BW177D-3, 116 Hrs ............................................................$$85,000 2007 BOMAG BW211D-40, 498 Hrs ..........................................................$$87,000 2006 BOMAG BW213DH, 588 Hrs ............................................................$$82,000 2007 HYPAC C815C, 1 Hrs ........................................................................$$52,000 2007 HYPAC C830C, 6 Hrs ........................................................................$$86,000 (2) 2005 HYPAC C840C, 360-1128 Hrs ......................................$$60,000-$67,000 2007 HYPAC C840C, 278 Hrs ....................................................................$$91,000 1999 HYPAC C842C, 1 Hrs ......................................................................$$103,500 2006 HYPAC C766C, 34 Hrs ....................................................................$$101,000 2007 HYPAC C778B, 261 Hrs ..................................................................$$126,000 2005 INGERSOLL-RAND SD122DX, 800 Hrs ............................................$$94,000 2005 INGERSOLL-RAND DD138HFA, 1397 Hrs ........................................$$49,000 2008 VOLVO DD16, 50 Hrs........................................................................$$32,000 2008 VOLVO DD31HF, 1354 Hrs................................................................$$38,000 2008 VOLVO DD90HF, 616 Hrs................................................................$$120,000 2008 VOLVO DD118HF, 763 Hrs..............................................................$$146,000 2008 VOLVO DD138HF, 1288 Hrs............................................................$$128,000 (3) 2007 VOLVO SD77DX, 83-462 Hrs........................................$$66,000-$85,000 (3) 2006 VOLVO SD116DX, 811-1175 Hrs................................$$75,000-$105,000 (4) 2007 VOLVO SD116DX, 286-1054 Hrs..............................$$105,000-$106,000 1999 WACKER RD25, 2497 Hrs ..................................................................$$8,000

2002 VOLVO A30D, Stk# 13101008, 8362 Hrs..........................................$$92,500

OFF HIGHWAY TRUCKS 1999 VOLVO A25C, 10096 Hrs ..................................................................$$65,000 (7) 2007 VOLVO A25D, 2991-4263 Hrs ..................................$$169,000-$290,000 2008 VOLVO A25E, 2357 Hrs ..................................................................$$248,000 2003 VOLVO A30D, 5478 Hrs ..................................................................$$235,000 (7) 2007 VOLVO A30D, 3241-4594 Hrs ..................................$$220,000-$270,000 2004 VOLVO A40D, 11944 Hrs ................................................................$$115,000 (6) 2007 VOLVO A40D, 4746-5789 Hrs ..................................$$305,000-$400,000 (2) 2008 VOLVO A40E, 3110-3633 Hrs ..................................$$490,000-$500,000

BACKHOE LOADERS 2007 VOLVO BL70D, 354 Hrs ....................................................................$$57,000 2007 VOLVO BL70, 1897 Hrs ....................................................................$$56,000

12007 VOLVO EC240CLC, Stk# 11103798, 4154 Hrs................................$$79,500

CRAWLER EXCAVATORS

2008 VOLVO G940, Stk# 14100712, 965 Hrs ..........................................$$150,000

MOTOR GRADERS

2006 VOLVO EC35, Stk# 21100157, 209 Hrs ............................................$$36,000

2007 CHAMPION C86, 320 Hrs ..............................................................$$109,000 2007 VOLVO C80A, 406 Hrs ....................................................................$$102,000 2008 VOLVO C86A, 207 Hrs ....................................................................$$115,000 2008 VOLVO G930, 930 Hrs ....................................................................$$165,000 2009 VOLVO G930, 506 Hrs ....................................................................$$210,000 (4) 2007 VOLVO G940, 357-1396 Hrs ....................................$$168,500-$194,000 (6) 2008 VOLVO G940, 304-1273 Hrs ....................................$$165,000-$215,000

SKID STEERS

2004 CATERPILLAR 247, 2375 Hrs ..........................................................$$17,000 2005 VOLVO MC80, 461 Hrs ....................................................................$$34,000 2006 VOLVO MC70B, 4217 Hrs ................................................................$$24,500 2006 VOLVO MC110B, 311 Hrs ................................................................$$34,000

COMPACTION EQUIPMENT-COMBINATION 2007 INGERSOLL-RAND CR30, 119 Hrs ..........................................$$52,000

MINI EXCAVATORS 2005 VOLVO ECR28, 255 Hrs ....................................................................$$28,000 2006 VOLVO ECR38, 196 Hrs ....................................................................$$38,000 2006 VOLVO ECR28, 32 Hrs ......................................................................$$35,000 2005 VOLVO EC25, 47 Hrs ........................................................................$$34,000 2006 VOLVO EC25, 25 Hrs ........................................................................$$34,000 1998 VOLVO EC35, 763 Hrs ......................................................................$$21,000 2006 VOLVO EC35, 839 Hrs ......................................................................$$27,000 2006 VOLVO EC45B, 83 Hrs ......................................................................$$47,200 2006 VOLVO EC45, 120 Hrs ......................................................................$$53,500 2008 VOLVO EC55B, 1858 Hrs ..................................................................$$48,000 2008 VOLVO EC55B, 1765 Hrs ..................................................................$$48,000

WHEEL EXCAVATORS

Serving You From:

North Carolina: Charlotte, Raleigh, Asheville, Greenville.

South Carolina: Columbia, North Charleston, Piedmont,

SWEEPER / BROOM EQUIPMENT 2009 BROCE KR350, 686 Hrs ..........................................................$$36,000

CRAWLER LOADER

2008 VOLVO EW210C, 609 Hrs ..............................................................$$185,000

Contact: Doug Wilson 704-562-2032 Fax: 704-494-8196 Email: doug.wilson@ascvolvo.com

2002 CATERPILLAR 322C, 8399 Hrs ........................................................$$47,000 2006 DEERE 450D LC, 4156 Hrs ............................................................$$250,000 2005 VOLVO ECR58, 805 Hrs ....................................................................$$45,000 2006 VOLVO ECR58, 722 Hrs ....................................................................$$49,000 (2) 2007 VOLVO ECR58, 43-1795 Hrs ........................................$$39,000-$55,500 2008 VOLVO ECR88, 262 Hrs ....................................................................$$87,000 2005 VOLVO ECR88, 487 Hrs ....................................................................$$68,000 2004 VOLVO EC140B LC, 2429 Hrs ..........................................................$$60,000 2006 VOLVO EC140B LC, 1523 Hrs ..........................................................$$79,000 2007 VOLVO EC210C LC, 777 Hrs ..........................................................$$126,000 2007 VOLVO EC240B LC, 3025 Hrs ........................................................$$132,000 (2) 2008 VOLVO EC240C LR, 2019-2033 Hrs ........................$$180,000-$190,000 (6) 2007 VOLVO EC290B LC, 5-1700 Hrs ..............................$$140,000-$180,000 2005 VOLVO EC330B LC, 3133 Hrs ........................................................$$171,600 2006 VOLVO EC330B LC, 3591 Hrs ........................................................$$140,000 (5) 2007 VOLVO EC330B LC, 942-2352 Hrs ..........................$$160,000-$190,000 2003 VOLVO EC460B LC, 6512 Hrs ........................................................$$149,000

1995 CATERPILLAR 963B, 8447 Hrs................................................$$49,000

Contact: Billy Brice 678-592-1004 (Southeast U.S.) Email: billy.brice@ascvolvo.com Georgia: Acworth, Buford, Forest Park, Savannah

Alabama: Birmingham, Huntsville, Montgomery, Mobile,

Tennessee: Knoxville, Chattanooga

ASC has an expansive Volvo rental fleet. Call for more details. www.ascvolvo.com

Page 4 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SOUTHEAST EDITION Circulated Throughout

IN THIS ISSUE 35

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES… LINDER MACHINERY HOLDS OPEN HOUSE AT NEW FACILITY

Linder is the distributor of Komatsu off-road equipment in Florida, North Carolina, South Carolina and southeast Georgia.

OFFICIALS CELEBRATE BLUE RIDGE PARKWAY’S 75TH BIRTHDAY

MDOT: SIX OF 17 GULF COAST PROJECTS FINISHED FOR 2010

14 8

16 35 14 35

SPECIAL SECTION…

Founder, Publisher & CEO Vice President Emeritus Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

Approximately 17 million people drive on the parkway every year.

Katrina road work has surpassed $1 billion, including more than $600 million just to replace the bridges over St. Louis Bay and Biloxi Bay.

CASE CONSTRUCTION EQUIPMENT LAUNCHES FOUR NEW BACKHOES

Toll Free Fax e-mail Contact

The new Case 580N, 580 Super N, 580 Super N Wide Track and 590 Super N backhoes replace the company’s M Series 3 product line.

LITTLE TALLAHATCHEE BRIDGE TO BE REPLACED IN ALABAMA

The appearance of the bridge fits seamlessly with its rural surroundings on Old Broadwell Mill Road, but it’s soon to become structurally obsolete.

Toll Free Fax e-mail Contact

Edwin M. McKeon Sr. Hal Ewing Richard C. McKeon Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

Richard C. McKeon • North & South Carolina • Tennessee • Virginia 704/366-1342 800/288-4234 704/366-1344 rmckeon@cegltd.com Rich Olivier • Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida Panhandle 770/443-3174 800/409-1479 770/443-3176 rolivier@cegltd.com Jim Van Natta • Florida • Virgin Islands • Puerto Rico

ASC RISES TO CHALLENGE OF MAINTAINING SENNEBOGEN IMAGE

407/365-5720 800/344-3026 407/366-3192 jvannatta@cegltd.com

ASC President Brad Stimmel said the addition of Sennebogen’s green line of material handling machines will work well to complement ASC’s total product offering.

Toll Free Fax

LATE MODEL GROVES GO ON BLOCK AT ALEX LYON ATLANTA SALE

Contact

Dale Agnew • Louisiana

Toll Free Fax

877/877-4997 972/719-2611 dagnew@cegltd.com

The sale included machines from Cyclone Land Development Co. Inc., Atlanta, as well as rental returns from Cowin Equipment and Neff Rentals.

e-mail

• Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

56 BUSINESS CALENDAR 62 CLASSIFIEDS 64 COMING AUCTIONS

EQUIPMENT… 48 AIM Dozer Rakes 54 KOMATSU PC228USLC-8 Hydraulic Excavator

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2010, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 5

Page 6 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2003 Komatsu WA250-3MC, s/n A71869, Good Shape, Bkt Scale Sys. “bkt scale not operating at this time”, 4269 Hrs ..$$48,000

2005 Hamm Model 3307 Smooth Drum Compactor, s/n 1590530, 1545 Hours, Job Ready Condition, No shell kit ........$$28,500

Equipment Available for Sale Art. Trucks

1992 Volvo A25B Off Road Truck ..................................................C CALL

2007 John Deere 50D, s/n 245826, 1819 Hours, Mini Excavator, Cab with AC, Great Shape, Rubber Tracks....................$$40,000

2008 Bandit BEAST 2680, s/n 2248R003073, 1363 Hours, Horizontal Grinder, Pintle Hitch, Tandem Trailer, Work Ready ..................$$135,000

Skid Steers / Track Loaders

1999 Caterpillar 426C-IT, Tool Carrier, Loader Back Hoe w/Bucket & CALL Forks ..............................................................................................C

2002 Caterpillar 246, s/n 5SZ06410, 2581 Hours, Skid Steer, Work ready no problems ....................................................................$$15,000 2007 John Deere CT332, s/n 147985, 1,254 Hours, High Track Skid Steer with Rubber Tracks, Enclosed cab with Air, Nice unit ......$$32,500

2007 Komatsu D39PX-21A, OROPS, Pat Blade, LGP Tracks, Good CALL Shape ..............................................................................................C

2006 Cedar Rapids Model 5048, s/n 52819, 50x48 Horizontal Shaft CALL Impactor..........................................................................................C

2007 John Deere 50D, s/n 245826, 1819 Hours, Mini Excavator, Cab with AC, Great Shape, Rubber Tracks ........................................$$40,000 2007 Volvo EC290B-LC Hyd. Excavator, Manual Thumb, Excellent CALL Shape, Cat Walks, Work Ready ......................................................C 2008 Volvo EC210C-LC Hyd. Excavator, Manual Thumb, Excellent CALL Shape, Cat Walks, Work Ready ......................................................C 2005 Volvo ECR38 Mini Excavator, OROPS, Knock Down Blade, CALL Rubber Tracks, Good Shape............................................................C

2004 Tiger Cat 630C, s/n 6302183, 10,596 Hours, Dual Arch Skidder, Work Ready, Recently Serviced..................................................$$70,000 1997 Prentice 410E, s/n 410P54864, 7065 Hours, Log Loader, Rough Shape, Runs out OK, Needs Engine Enclosures ........................$$18,000

Backhoe Loaders Dozers

Excavators

Hammers

2006 Caterpillar H140, s/n BXB00444, Hydraulic Excavator Hammer, CALL used very little, Fits 330 size excavator ..........................................C

Grinders

2006 Morbark Model 6600, s/n 196-1082, 2792 Hours, Track Horizontal Grinder, 1000HP 3412 Cat Engine, Excellent Cond. Job Ready ......................................................................................$$300,000

Crushers Forestr y

2002 Caterpillar 246, s/n 5SZ06410, 2581 Hours, Skid Steer, Work ready no problems ......................................................$$15,000

1997 John Deere 648G, s/n DW648GX560641, Dual Arch Skidder, Large Tires, Good Shape .......................................................... $20,000 1998 Tigercat 845, s/n 8450452, Track Feller Buncher, New hyd. Pump, Engine has been replaced, Fair Shape ............................$$33,500 2004 Tigercat 640C Clam Bunk Skidder, s/n 640C1602, 5500 Hours, Single wheels, Good shape ......................................................$$105,000 2006 Morbark 27NCL 27” Disk Chip Har vestor, s/n 81, 5300 Hours, 3412 Cat, 750HP, no loader, Woods Ready, Rebuilt at Morbark in 2005 ................................................................................................$$140,000 2004 Morbark Model 4600 Horizontal Grinder, s/n 1841144, 3412E Cat Engine, 750HP, Long Conveyor, Work Ready, 4351 hrs..............$$200,000

Paving / Compaction

2005 Hamm Model 3307 Smooth Drum Compactor, s/n 1590530, 1545 Hours, Job Ready Condition, No shell kit..........................$$28,500 1999 Caterpillar CP-433C, Sheeps Foot Roller w/Hyd. Knock Down CALL Blade ..............................................................................................C 2008 Ingersoll Rand DD-24 Double Drum Asphalt Roller, Roll Bar, CALL Work Light Package, Excellent Shape, Ready to Work....................C

Tr a i l e r s

Financial Federal Credit Inc. 10130 Mallard Creek Road, Suite: 210 Charlotte, NC 28262 704-909-2600 James Jones 704-236-7954

Ph. 770-949-9231 • Fax: 770-947-9916

2006 Interstate 40DLA Trailer Tag along Tr a i l e r, pintle Hitch, 20’ deck, 5’ dove tail w/ramps, dually wheels, Air brakes..........................$$15,000

Wheel Loaders

2003 Komatsu WA250-3MC, s/n A71869, Good Shape, Bucket Scale System “bucket scale is not operating at this time”, 4269 Hrs ..$$48,000 1997 Caterpillar IT-28G, Tool Carrier w/Bucket & Forks, Enclosed Cab, CALL Good Rubber ..................................................................................C

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 7

Page 8 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Linder Machinery Holds Open House at New Facility

Well-cooked ribs and chicken along with sides and dessert made for some good eating. Stuart (L) and Matt Johnson of Stu Import Export Inc., Orlando, Fla., spent a few minutes looking over the Komatsu PC18 excavator.

inder Industrial Machinery Company held an open house on Oct. 7 to announce the relocation of its Orlando operations from South to North Orlando, Fla. Linder is the distributor of Komatsu off-road equipment in Florida, North Carolina, South Carolina and southeast Georgia. The company also represents Wirtgen milling machines, Vogele pavers, Hamm compaction products, Kleeman crushing products, Atlas Copco drill, compressor, generator, and hydraulic attachments, Genesis demolition and scrap attachments, Exodus scrap handlers, Esco, Hensley and Superior Brooms. Central Florida Regional Manager George Carr explained that, “The move into North Orlando came about as part of Linder’s plan to continually offer our customers the best products

and services in the industry. The new Orlando facility is in a modern, standalone building that increases our efficiency by allowing additional parts inventory availability and a central location within the territory. We are now ideally located to serve the entire Orlando market as well as the six surrounding counties, with excellent access to major north and south highways.” In addition to long-term salesmen Matt Aultman and Steve Moore, the new location has excellent product support personnel. Along with four resident technicians on staff, John Bass, parts and service representative, and Gary McDowell, parts manager, bring more than 50 years of experience to the Orlando team. The new facility is located at 2805 Ace Road, Orlando, Fla., 32804. (L-R): George Carr, central Florida regional manager; Alan Nucci, northern Florida regional manager; Michelle Fain, marketing manager; and John Coughlin, president; represented just a few of the Linder people at the open house.

Bruce Cook (L), Allstate Paving, and Bill Trimble, asphalt product specialist, Linder, spend some time chatting about business at the open house. The new Linder Orlando facility is in a modern, stand-alone building that increases the company’s efficiency by allowing additional parts inventory availability and a central location within the territory.

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ October 20, 2010 â€˘ Page 9

Kdakd ^h ndjg XdbeaZiZ gdVY WjâY^c\ gZhdjgXZ# 6 XdbegZ]Zch^kZ gVc\Z d[ eVk^c\! XdbeVXi^dc! \gVY^c\ VcY bâa^c\ bVX]^cZh VcY XdchigjXi^dc ZfjêbZci \^kZh ndj ZkZgni]^c\ ndj cZZY [dg i]Z gdVY V]ZVY#

4(%Ă‰2/!$ !(%!$ )3Ă‰7)$%Ă‰/0%.

Kdakd gdVY bVX]^cZgn ^h hjeedgiZY lî] ldgaYl^YZ Zc\^cZZg^c\! iZX]cdad\n VcY XjhidbZg hZgk^XZ# I]Z gZhjai/ i]Z ]^\]"eZg[dgbVcXZ ZfjêbZci VcY hjeedgi ndj ZmeZXi [gdb Kdakd# ;dg bdgZ ^c[dgbVi^dc! XdciVXi ndjg adXVa 6H8 8dchigjXi^dc :fjêbZci YZVaZg# L]Zc ndjÂźgZ gZVYn id hiVgi WjâY^c\ gdVYh! i]Z higZc\i] d[ Kdakd ^h dc i]Z gdVY [dg ndj#

-OREĂ‰#ARE Ă‰"UILTĂ‰)N

lll#VhXkdakd#Xdb

Acworth, GA 6h]Zk^aaZ! C8 770-529-5125 -'-"+-,"%+'% Atlanta, GA 770-319-0074 8]VgadiiZ! C8 Buford, GA ,%)"*.+"-'-( 678-318-9500 <VgcZg! C8 Savannah, GA .&."++&"-,&% 912-964-8079

Asheville, NC Greenville, NC Piedmont, SC <gZZck^aaZ! C8 828-687-0620 252-754-5280 E^ZYbdci! H8 864-704-1060 Charlotte, '*'",*)"*'-% NC Cayce, SC -+)",%)"&%+% Chattanooga, TN 704-596-8283 423-308-7940 8VnXZ! H8 803-791-07408]ViiVcdd\V! IC Garner, NC North Charleston, SC Knoxville, TN -%(",.&"%,)% )'("(%-",.)% 919-661-8710 843-414-1120 865-525-1845

Cdgi] 8]VgaZhidc! H8 -)(")&)"&&'%

Southeastern Dealers

@cdmk^aaZ! IC -+*"*'*"&-)*

Page 10 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARE YOUR CREWS TRAINED ACCORDING TO OSHA STANDARDS TO WORK SAFELY IN THE TRENCHES? Training SEMINAR Topics: t *OUSP UP 5SFODI &YDBWBUJPO 4BGFUZ t 5IF 04)" &YDBWBUJPO 4UBOEBSE t 1SPUFDUJWF 4ZTUFNT t 4PJM .FDIBOJDT "OBMZTJT t +PC 1MBOOJOH t $POöOFE 4QBDF *EFOUJöDBUJPO 3FRVJSFNFOU 0WFSWJFX

Location

Asheville, NC Athens, GA Asheville, NC Atlanta, GA Augusta, GA GA Athens, Baltimore, MD* Atlanta, GA

Augusta, GA

October

July

X X 10/20/x 10 TE/CS X x 10/06/x 10 TE/CS

07/28/10

Birmingham, AL Baltimore, MD*X 07/14/10 X Blacksburg, VA Blacksburg, VAX x Boone, NC Boone, 10/19/x 10 TE/CS Bristol, TN NC Bristol, TN 10/14/07/27/10 10 TE/CS Charleston, SC Charleston, SC10/21/07/22/10 10 TE/CS Charlotte, NC Charlotte, VA NC X 07/29/10 Charlottesville, 1VA 0/15/x 10 TE/CS Columbia, SC Charlottesville, Fayetteville, NC SC X Columbia, 07/23/10 10 TE/CS Frederick, MD Fayetteville, NC10/05/07/07/10 10 TE/CS Greensboro, NC MD 10/22/07/13/10 Frederick, Greenville, NC Greenville, NC X x 10/12/10 TE/CS Greenville, SC Greenville, SC X 07/20/10 Hagerstown, MD Greensboro, NC 07/30/10 X Harrisonburg, VA Hagerstown, MD x X Jacksonville, FL Harrisonburg, VA x X Jacksonville, NC Jacksonville, NC x X Knoxville, TN 10 TE/CS Lynchburg, VA TN 10/01/x Knoxville, 10 TE/CS Manassas, VA VA 10/07/07/09/10 Lynchburg,

Manassas, VA

07/15/10

Raleigh, NC

07/08/10

10/13/07/21/10 10 TE/CS Myrtle Beach, SC Myrtle Beach, SC Newport News, VA X Newport News, VA x 10/26/10 TE/CS Norfolk, VA 10/28/07/06/10 10 TE/CS Raleigh, NC VA Norfolk, 10/08/10 TE/CS Richmond, VA

Greensboro, NC 1.866.587.3624

Raleigh, NC 1.888.587.3624

Norfolk, VA 1.866.887.3630

Charleston, SC 1.866.957.3624

Birmingham, AL 1.877.312.1782

Atlanta, GA 1.877.312.1776

Richmond, VA 1.866.887.3630

Baltimore, MD 1.866.951.0809

Greenville, SC 1.877.312.1780

Jacksonville, FL 1.877.312.1783

Charlotte, NC 1.877.587.3624

DC/Northern VA 1.888.387.3624

Myrtle Beach, SC 1.866.586.9404

Knoxville, TN 1.877.312.1781

Training Class TE= Trench & Excavation CS= Confined Space SP= Spanish Training Class x = No Class

Richmond, VA 10/29/07/16/10 10 TE/CS Roanoke, VA Roanoke, x Savannah, GA VA X Staunton, VA Savannah, GA X x Suffolk, VA Staunton, VA X x Virginia Beach, Suffolk, VAVA X x 1VA 0/27/x 10 TE/CS Wilmington, NC Virginia Beach,

ed as no more than a bushwhacked footpath by an engineer for the North Carolina Highway Commission,” said Perdue, according to an advance copy of her remarks. The Sept. 10 ceremony marked the start of a weekend festival celebrating the parkway. Approximately 17 million people drive on the parkway every year, and both Perdue and McDonnell said the highway is an important component of each state’s tourism economy. Among the other dignitaries at the ceremony were North Carolina’s senators, Democrat Kay Hagan and Republican Richard Burr. Along with Virginia’s two senators, Democrats Jim Webb and Mark Warner, Burr and Hagan have introduced a bill that would authorize the National Park Service to acquire up to 50,000 acres of land surrounding the parkway. “This extraordinary roadway is an important part of the western North Carolina landscape, economy and way of life,” Hagan said.

December

August

TE=Trench & Excavation Training, Wilmington, NC xTraining, CS=Confined Space 08/04/10 TE/CS SP=Spanish Training Class and X=No Class

Officials Celebrate Blue Ridge MDOT: Six of 17 Parkway’s 75th Birthday Gulf Coast Projects Finished for 2010

LOW GAP, N.C. (AP) What started as a Depression-era highway project was celebrated Sept. 10 as an economic engine and a landmark to conservation. Dignitaries from North Carolina and Virginia, including the governors of both states, came to Low Gap to celebrate the 75th birthday of the Blue Ridge Parkway, the 469-mi. road that runs from Cherokee, N.C., to Waynesboro, Va. “The Blue Ridge Parkway demonstrates the importance of conservation,” said Virginia’s Republican Gov. Bob McDonnell. McDonnell announced that Virginia Green, a program that promotes environmentally responsible practices among tourism businesses, has added 75 new businesses to mark the anniversary. In prepared remarks, Gov. Perdue saluted the ingenuity that went into building the parkway, which saw construction begin on Sept. 11, 1935, initially employing more than 100 workers near Cumberland Knob. “The Southern edge of the parkway start-

November

X 12/10/10 TE/CS X X 11/17/10 Tx E/CS 12/15/10 TE/CS X X x 11/03/10 T08/25/10 E/CS 12/0 1/10 TE/CS TE/CS 12/29/10 TE/CS TE/CS x X X TE/CS 08/11/10 TE/CS 11/26/10 TE/CS X x 11/12/10 TE/CS X TE/CS 11/16/10 T08/20/10 E/CS 12/1 4/10 TE/CS TE/CS TE/CS 11/11/10 T08/24/10 E/CS 12/0 9/10 TE/CS TE/CS TE/CS 11/18/10 T08/19/10 E/CS 12/1 5/10 TE/CS TE/CS 11/02/10 T08/26/10 E/CS X TE/CS 11/09/10 T08/10/10 E/CS X TE/CS X 12/22/10 TE/CS TE/CS x X 12/28/10 TE/CS TE/CS x 11/19/10 Tx E/CS 12/17/10 TE/CS TE/CS X X x X 12/07/10 TE/CS TE/CS 11/30/10 T08/17/10 E/CS X TE/CS TE/CS 08/27/10 X X TE/CS x X X x X X x X X X X x 11/04/10 Tx E/CS 12/02/10 TE/CS TE/CS 12/3TE/CS 0/10 TE/CS TE/CS 08/12/10 11/10/10 T08/18/10 E/CS 12/0TE/CS 8/10 TE/CS TE/CS X X x 11/23/10 TE/CS 12/21/10 TE/CS 08/03/10 11/24/10 TE/CS 12/2TE/CS 3/10 TE/CS TE/CS 08/31/10 11/05/10 TE/CS 12/0TE/CS 3/10 TE/CS TE/CS 08/05/10 TE/CS 12/31/10 TE/CS TE/CS 08/13/10 X X TE/CS 08/06/10 X X TE/CS X X x X X x X X x X X x

GULFPORT, Miss. (AP) The Mississippi Department of Transportation said workers have completed six of the 17 big projects slated for this year along the Gulf Coast. Kelly Castleberry, MDOT’s district engineer for the southern half of the state, told The Sun Herald that nine of the 11 remaining projects are under construction. The 17 projects cost more than $135 million. Castleberry said work also will be completed within a couple of months on $11.5 million in Hurricane Katrina repairs and rebuilding of city streets overseen and paid for by MDOT. Katrina road work has surpassed $1 billion, including more than $600 million just to replace the bridges over St. Louis Bay and Biloxi Bay.

What’s going on in YOUR COMPANY

We want to know! Give us a call.

Construction Equipment Guide

(800) 523-2200 OR

FAX:

This public service announcement is sponsored by Construction Equipment Guide.

(215) 885-2910

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 11

Page 12 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com Hours Mon.-Fri. 7:30am-5:30pm Sat. 8am-12pm

THE BEST PARTS AND THE BEST TECHNICIANS

$155,000

for your Case Construction skid steer loaders and CTL track machines are at BROOKS SALES. And they’re waiting for YOU. Contact Jimmy for Service appointments and Brian for Parts.

2006 Link-Belt 460, 2099 hours, S/N K7J60898 9 LBX 460 Excavators to choose from!

$129,000 2005 Moxy MT41 articulated truck, 2615 hours, S/N 810064 ........10 MT41 trucks to choose from!

$68,000

704-233-4242 800-443-7569

New 2010 • 55 Ton Models and 2009 Off-Lease Detach Low Boys

2006 Hyundai 140, 640 hours, S/N N406122238

$35,000

L A I C E P S OFFER!

New 2010 Load Lugger models still available discounted and 2009 55 Ton* All High Tensile Models from our lease program coming off lease and available third quarter 2010. All units reconditioned and offered as with new 255R/70 Low Profile Tires, 25’ Load Well, Bucket Well, All Air w/Air Ride Suspensions. All units are set up to add Flip Axle Dolly, or Stinger. Prices for special attachments. Price can be quoted on request. Prices on units FOB, Griffin, GA from $48,750. Liberal sale and lease purchase financing. Terms available for qualified buyers. Reserve a unit now. *Other models can be made available.

2005 Bomag BW-166PDH, 3-roller, 747 hours, S/N 901581561004

Please Contact Us... Call / Mail / Fax for full Details

ASES SERVICES LLC

843-784-3198 • Fax: 843-784-3199 Email: kimquip@aol.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 13

Machine Inspection Special

Only $99

PLUS 10% OFF Labor

for services during the first 30 days after inspection

• Service available 24/7 • Certified, trained technicians • Documented maintenance for warranty assurance • Any brand, any model • Dozers, Articulated Trucks, Excavators, Motor Graders, Utility Equipment, Wheel Loaders, and more

*In-shop inspection only, at all Trekker locations. Inspections may vary with type of equipment.

Perfor mance you can c ount on Equipment • Parts • Service

Locations Miami Corporate Headquarters 12601 W. Okeechobee Road Miami, Florida 33018 Phone: 305-821-2273 Fax: 305-821-8822

Fort Myers 28631 N. Diesel Drive, Unit 105 Bonita Springs, Florida 34135 Phone: 239-949-0100 Fax: 239-949-0108

Tampa 1504 Tampa East Boulevard Tampa, Florida 33619 Phone: 813-341-4646 Fax: 813-341-4647

West Palm Beach 5489 Leeper Drive West Palm Beach, Florida 33407 Phone: 561-296-9710 Fax: 561-296-9712

Customer Care 877-971-7070 www.trekkertractor.com

Page 14 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case Construction Equipment Launches Four New Backhoes Case Construction Equipment Sept. 22 launched a complete update of its loader/backhoe product line, introducing four new N Series loader/backhoe models. The event took place at the company’s Tomahawk Customer Center in Tomahawk, Wis. The new Case 580N, 580 Super N, 580 Super N Wide Track and 590 Super N backhoes replace the company’s M Series 3 product line. The new machines all feature 4.5-L, turbocharged engines, ranging from 79 hp (59 kW) in the 580N to 108 hp (80.5 kW) in the 590SN. “The N Series was engineered from the ground up,” said Rob Marringa, marketing manager, Case Construction Equipment. “We’ve taken the flagship product of the Case lineup and delivered best-in-class performance from back to front. The new N Series really is ‘stronger everywhere.’ The N Series extends a legacy of loader/backhoe leadership that began when Case introduced the industry’s first factory-integrated loader/backhoe in 1957.” Case Power Lift Boosts Backhoe Capacity “One new feature that is a real game-changer on the N Series is Case-exclusive Power Lift,” said Marringa. “Power Lift channels the hydraulic power directly to the boom with

the touch of a button. As a result, our backhoe lifting capabilities outperform competitive models by as much as 39 percent — while running at low engine RPMs.” The increased backhoe strength takes new N Series performance beyond the previous M Series models, according to the manufacturer. A new fabricated boom design increases strength while maintaining the over-center design. Backhoe bucket pins are larger and stronger to accommodate the improved lift capacities. Meanwhile, the N Series continues its maintainability with triple bushings and floating pins. By providing lift capabilities comparable The Case N Series machines feature increased loader breakout and to a 5-ton (4.5 t) excavator, with enhanced lift. The redesigned loader arms are stronger and longer, enabling the dig depths, the N Series loader/backhoes bucket to dump into the center of a truck for more efficient loading. may eliminate the need to trailer an excavator to the job site. “During our extensive R&D process, we enlisted equipment operators throughout North America to test the N Series enhancements,” explained Marringa. “Comments from Dennis Zentner, DRZ Contracting, in Delta, British Columbia, were typical. He told us, ‘The 580SN WT backhoe performed well on grading, trenching, backfilling, heavy lifting, hole-patching and rock-breaking. Its heavy-lifting ability is fantastic. It will save me from using an excavator for lifting.’”

Power Lift delivers backhoe lift capabilities equivalent to a 5.5 ton (5 t) excavator and the dig depth of an 8.2 ton (7.5 t) excavator.

N Series Features Increased Loader Lift, Breakout, Reach The Case N Series machines also deliver more power to the loader, for increased breakout and lift capabilities. The new loader arms are stronger and longer, providing greater loader reach. This lets operators dump material into the center of a truck for faster loading and increased payloads, according to the manufacturer. see CASE page 18

The four new N Series loader/backhoe models, including the 590 Super N, offer increases in backhoe breakout force and lift, along with increased loader breakout force, lift and reach.

Tomahawk Customer Center Provides Demonstrations, Training in North Woods Setting The Tomahawk Customer Center, a 500-acre facility located in Wisconsin’s north woods, provides hands-on product demonstrations and training for more than 2,000 visitors each year and has been serving Case customers, dealers and employees for more than 60 years. The facility stands on the site of the Drott Manufacturing proving grounds, which date back to the early 1900s. The customer center features modern training, a fleet of more than 60 pieces of new equipment to operate and log cabin-style lodges for accommodations. Detailed presentations on Case innovations and technology are provided at the welcome

center and solution center. A customer visit typically includes classroom presentations, machine walk-arounds, hands-on maintenance sessions, customized product demonstrations and equipment operation sessions. A 3,000-sq.-ft. product review center provides a panoramic view to a product demonstration area where visitors can see the full line of Case construction equipment in operation. Presenters inside the product review center are able to communicate directly with Case operators who are running the equipment on the proving grounds. A camera inside the equipment provides a big-

screen display from the operator’s point of view, showing how the operator engages each feature to perform various tasks. Visitors have the opportunity to operate the full range of Case equipment, including excavators, wheel loaders, loader/backhoes, crawler dozers, skid steer loaders, compact track loaders, motorgraders, compaction equipment, articulated trucks, rough-terrain forklifts and loader/tool carriers. The Tomahawk Customer Center is located near the town of Tomahawk, approximately 45 miles north of Wausau, Wis.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 15

VIBRATORY HAMMERS

EXCAVATOR MASTS

ROTARY HEADS/AUGERS

- Compact Hammer Size Permits Additional Sheet Length - Lower Costs While Inreasing Utilization of Excavator - Increases Maneuverability -

- Fits CAT 330 and Larger Excavators - Self Erecting with CFA Tooling - Vibro and Drill Mount -

- Optional Air/Water or Air/Water/Grout Swivels - Torque from 5,525 to 31,655 ft-lbs - Two-speed Operation Available -

IT’S AMAZING WHAT A LITTLE PEACE OF MIND

WILL DO FOR YOUR BOTTOM LINE. John Deere Certified Used equipment is backed by a 90-day, unlimitedhour powertrain warranty.* It’s a customer safety net built into the greatest used machine value in the industry. So what’s our safety net? We ensure durability by putting each Certified Used machine through a rigorous 100-plus-point inspection. Buy yourself some serious peace of mind by asking your dealer about it, or by calling 800-503-3373. Want more for your equipment dollar? We’re on it.™ *See your John Deere dealer for complete warranty details including an up-to-12-month powertrain warranty.

www.JohnDeere.com/Certified

Page 16 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Little Tallahatchee Bridge to Be Replaced in Alabama By Laura Johnson

8515 SR 207 North • Hastings, FL 32145

904-692-3673

THE ANNISTON STAR

www.futchstractordepot.com

0% Financing Available

PRICES REDUCED_

ON ALL WIDE STICK MOUNTED MECHANICAL THUMBS • Rigid A-Frame Design for the Toughest Applica!ons • Same Day Shipping! • Over 1000 Sa!sfied Contractors Across the Country LIMITED TIME OFFER

Call 800-458-3773 NOW! rocklandmfg.com

CEDAR SPRINGS, Ala. It’s not always easy to cross the one-lane pony truss bridge that crosses the Little Tallahatchee Creek near Cedar Springs, but it’s always scenic. The bridge, built of wood beams and steel railing was constructed in the early 1950s to replace a covered bridge that was swept away by a tornado. About 15 ft. below the wooden surface, bream and small turtles tread water just above the soot-covered creek bed. A few yards downstream, water so clear it looks like it was drawn from the tap runs over the crumbled stone remnants of an old mill. The appearance of the bridge fits seamlessly with its rural surroundings on Old Broadwell Mill Road, but it’s soon to become structurally obsolete, according to officials. By next year it will be replaced by a two-lane truss bridge with a paved surface. “It’s structurally deficient because it will not hold up legal loads,’’ said Calhoun County Engineer Brian Rosenbalm. Thirty feet of the 60-ft. bridge is in Calhoun County Commissioner J.D. Hess’ District 4 and the other 30 ft. is in District 5, represented by Commissioner Rudy Abbott. They pooled funds from revenue drawn from a 2-cent sales tax to pay for the truss bridge, which they selected for both its practical and its aesthetic qualities. “It fits in place,’’ said Hess while visiting the bridge site. “We want Calhoun County to be as positive and as beautiful as we can make it.’’ Nearly half a dozen residents stopped to talk to Hess about the bridge reconstruction project Aug 18. All were in favor of it. Residents who live nearby often have to wait to let oncoming traffic pass atop the bridge, causing traffic to back up on either side. It also can become dangerous, some say, because a small hill is situated not far from the bridge on one side, and a blind curve is situated a short distance away in the other direction. “We do find it fairly dangerous,’’ said Billy Brannon, who lives nearby. “We can’t wait to have it redone.’’ It’s not the first truss bridge to be constructed in Calhoun County in recent months, and it likely won’t be the last. Earlier this year District 2 Commissioner Robert Downing replaced a bridge on Rainbow Drive in White Plains with a truss bridge and another on Old Downing Mill Road. Initially Downing received some light-hearted ridicule from other commissioners for his support of the truss bridges, but five years after the construction of the first bridge, they’re coming around. “I don’t mind taking a little ribbing from

the rest of the commission and I’m excited to see that we’re starting to see truss bridges being built throughout the rest of the county,’’ Downing said. He said truss bridges are less disruptive to the environment than some other bridge construction styles. “One of the main advantages of a truss from an environmental standpoint is that there is less damage to the stream underneath, if the bridge is crossing water,’’ Downing said. “I really wanted to construct a truss bridge because it was replacing a truss bridge and that old bridge was really a landmark for the Choccolocco area.’’ Truss bridges are paid for in two phases, in the first phase the pre-fabricated parts of the bridge are purchased. In the second phase a bid is awarded for the piecing together of those parts, and for concrete and paving work that accompanies it. It cost $315,000 to purchase and construct the prefabricated bridge in Downing’s district from U.S. Bridge. Currently, the bridge on Old Broadwell Mill Road has cost $114,000 to purchase its pre-fabricated parts and the county is still receiving bids for the contract work. Rosenbalm said it costs slightly more to build truss bridges, but in turn they’re quicker to install and more attractive once completed. “It’s not an enormous difference,’’ Rosenbalm said. “It’s taxpayer money going right back to what they paid it for.’’ However Downing said he finds the bridges to have a comparable price. He added that the construction of the bridge on Rainbow Drive came in under budget and on time. Now, in Hess’ district alone, at least two more such bridges may be in the works. He would like to construct a truss bridge along Verbon George Road and to put a new truss bridge on Hammonds Bridge if re-elected in November. The bridges are not commonly found in urban settings and local officials don’t expect that to change, but they say the truss bridges fit well in rural communities. “There is a time and a place for it,’’ said Calhoun County bridge inspector Jeffery A. Clendenning of the bridge. He’s been inspecting the existing bridge for 16 years. With a 10-ton (9 t) weight limit, the onelane structure can only accommodate cars and pick-ups, officials said. Buses are forbidden to drive atop it and anyone pulling heavy equipment across it does so illegally and at their own risk. “This bridge is still safe for people to drive on before it gets unsafe, we’re replacing it,’’ Hess said. “This area is beginning to grow and something needs to be done.’’

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 17

Take advantage of low rate financing or cash in lieu of financing on all new JCB products*, including the Safest Skid Steer and the #1 Selling Backhoe in the World!

*Offer subject to credit approval. Valid through December 31, 2010. Not available on all models. JCB reserves the right to change or cancel the program at anytime.

Looking for an

Experienced Replacement?

The RIGHT Equipment is as important as the RIGHT Employee. !

2003 CAT ® 420D Features: OROPS, 4WD, MP Bkt, Std Stick • 937 Hrs.

• $47,500

• #FDP14826

2007 CAT ® 420E Features: OROPS, 4WD, MP Bkt, Std Stick • 3336 Hrs.

• $71,000

• #HLS03328

2008 CAT ®430E IT Features: OROPS, IT, GP Bkt, Forks, Ext Stick • 2451 Hrs.

• $89,500

• #DDT00845

BlanchardMachinery.com • 877.326.6112

Page 18 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

N Series Introduces All-New Transmission Technologies CASE from page 14

Ion Warner, senior director of marketing, North America Case Construction, welcomes the media to Tomahawk, Wis.

Rob Marringa, marketing manager of Case Construction, explains the road course on which the Case N Series backhoe will perform with a full bucket to the media.

George MacIntyre, Case Construction, goes over the improvements that have been made to the boom of the N Series backhoe.

Transmission, Hydraulic System Improvements The Case N Series introduces a new transmission family, the Powershift S-Type, Powershift HType and Powershuttle options. All transmission choices are available on the 580SN, 580SN WT and 590SN. The 580N offers the Powershift SType and Powershuttle transmissions. The two Powershift transmissions include four forward and three reverse gears, and the Powershuttle transmission offers four forward and four reverse gears. The Powershift transmission provides a standard kick-down feature and introduces SmartClutch modulation. The SmartClutch feature lets operators customize the transition from forward to reverse to meet the demands of their specific application. The N Series machines deliver improved cycle times and efficiencies through the new Variable Volume Hydraulic (VVH) System. The VVH System operates at a lower temperature than competitive hydraulic systems. The 580N continues to offer a single gear pump open hydraulic system. A new auxiliary hydraulic system for powering attachments includes flow control as a standard feature, automatically matching hydraulic flow to the needs of the attachments. Additionally, hoses are routed inside of the boom structure to provide greater protection for applications such as demolition. These improvements in hydraulics also help achieve greater fuel efficiency, according to the manufacturer. Marringa added that Case backhoes have always given contractors a solution for excavating, digging, carrying and loading. “A loader/backhoe’s versatility includes the ability to drive to a job site. The Case machines can travel at up to 24 miles per hour – and the over-center backhoe design makes travel smoother.” New Cab Improves Visibility, Airflow, Comfort Several new comfort and safety features in the N Series loader/backhoes boost operator productivity. Floor-to-ceiling windows provide enhanced visibility. New rear-quarter see CASE page 50

Case N Series Extends Backhoe Legacy The introduction of the Case N Series loader/backhoe product line writes the most recent chapter in a 50-plus-year history that began in 1957 with the industry’s first factory-integrated tractor loader/backhoe, the Case 320. While success may have a thousand fathers, the birth of the loader/backhoe can be reasonably credited to one man, Elton Long, a mechanical engineer who joined Case in 1956 as part of the company’s acquisition of American Tractor Corp (ATC). During his 28 years with Case, Long received 46 patents for his work in designing and improving construction equipment. His biggest impact on the company and the industry came soon after the Case-ATC merger, when Long led the team that developed the first fully factory-integrated loader/backhoe. At the 1956 Road Show expo, ATC included in its exhibit a Case 300 crawler loader that featured a backhoe attachment. This one-of-a-kind hybrid attracted enough attention that Case decided to produce a combined loader/backhoe model. The task fell to Elton Long and his team, whose creation was launched as the Case 320 loader/backhoe, with Case shipping the first factory-built unit on Feb. 26, 1957. A new product category was born. Industry Contribution The original Case loader/backhoe provided many advantages over the retrofit approaches of other manufacturers. The integrated loader/backhoe was compact and easy to handle in a variety of applications, including jobs previously done by hand. Its integral design took into account the different types of loading, digging and carrying requirements that the machine would experience, and resulted in a manufactured product tough enough to withstand the combined stresses of these various applications. Prior to the Case loader/backhoe introduction, typical loaders and backhoes of that era were not used in heavy construction. Loaders were mostly used in agriculture, rarely lifting anything heavier than manure or hay bales. Neither loaders nor backhoes had much digging capacity. The integrated loader/backhoe helped contractors reduce costs, increase productivity and handle more work with less equipment.

In addition to being the first machine of its kind, the loader/backhoe featured components that were all Case products, enabling quick design changes and testing, as well as a single warranty to cover the entire machine. Generations of Leadership The Case loader/backhoe history has included a number of important “firsts” — such as the Extendahoe extendible dipper stick, return-to-dig and return-to-travel functionality, ride control, side lighting and the Case trademark over-center boom design. Decades of continuous product development have led to the Case N Series introduction. The Case loader/backhoe evolution includes many milestones: • The Case Construction King backhoes of the mid-1960s added hydrostatic steering, heavy-duty axles and steering cylinders and innovations such as automatic self-leveling and semiautomatic return-to-dig. Also new was the reverse-linkage loader bucket design that greatly enhanced digging power and grading efficiency. • The Case 580CK, launched in 1969, featured a number of advancements, including the hydraulic Extendahoe extendible dipper stick. Also making its first appearance on the 580CK was the “side-shift” backhoe design, still offered on European models, which allowed the backhoe to slide from side to side on the back of the chassis, enabling easier use in close quarters. • The Case B Series loader/backhoes of the early 1970s introduced the “over-center” backhoe design, patented by Case and Elton Long in 1968. This allowed the boom and cylinders to rest forward of the upright position, moving the center of gravity to the front for better stability during roading and trailering. • Also in the early 1970s, Case introduced the 780CK, the first loader/backhoe with a unitized frame. This machine was capable of withstanding higher stress, load and breakout levels. • In the early 1980s, as part of a joint venture, Case began using an advanced generation of diesel engines for its loader/backhoes. The Case Family I engines offered higher fuel see LEGACY page 50

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 19

SAVE TIME SAVE LABOR

SAVE MONEY SAVE OIL

The FlangeLock Tool allows for the simple sealing of open SAE Code 61, 62 & 62 KAT-Style hydraulic flanges without tools. Constructed out of lightweight high tensile strength T2200 anodized aluminum. Easy on, easy off. Offers a leakproof solution to hydraulic system and environmental cleanliness.

Beasley Forest Products, Inc. P O Box 788 Hazlehurst, GA 31539

Crane Mats & Skids BFP Builds Quality Mats Produces over 200 mats per day End Coating to prevent splitting and checking Place stacking sticks between mats to allow drying and prevent decay Minimal Wane Consistent 48” wide mats; no random widths

We can truck or rail crane mats anywhere in the United States.

BFP Logo stamped into each bold head Maintains large inventory of mats

Phone (912) 375-5174 Fax (912) 375-9541 Email: bfp9541@bellsouth.net

www.beasleyforestproducts.com

• No Tools Required • No Expensive Hardware Needed • No more Rags stuffed into hoses • No more messy Plastic Caps • The Ultimate Contamination Control Tool

• One hand Installation • Eliminate Hydraulic Oil Spills & Clean up • Quick Installation & Ease of Usage • Industry Acclaimed • 100% Made in USA • Safe for Personnel & Environment

For more information contact Mike Pearl

914.980.8890

email: mike@flangelock.com www.flangelock.com

Page 20 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact: Tel: Fax: Email:

Walt Kay 540/309-1709 540/389-6507 walter.kay@RSCrental.com

RSC Equipment Rental BOOM LIFTS

2004 JLG E300AJP-NAR, ART BOOM LIFT-30-34'-2WD DC, S/N 0300079224, UNIT #517940 ........................................$16,875 1999 GENIE Z45/25-DF-4WD, ART BOOM LIFT-45-49'-4WD, S/N Z452511283, UNIT#289324 ..................................$18,565 2005 JLG E400AN-NAR, ART BOOM LIFT-40-44'-2WD DC, S/N 0300081644, UNIT #541391 ........................................$23,287 2002 TEREX TB85-D-4WD, STR BOOM LIFT-85-89'-4WD, S/N 2660012, UNIT #7602108 ............................................$24,731 2000 JLG 660SJ-DF, STR BOOM LIFT-65-69'-4WD, S/N 0300053825, UNIT #350053 .......................................$27,453 2002 GENIE S85-DF-4WD, STR BOOM LIFT-85-89'-4WD, S/N S853354, UNIT #439174 ..............................................$39,253

AIR COMPRESSORS

2006 ATLAS COPCO XAS97JD, AIR COMPRESSOR-DSL-80185 CFM, S/N USA015223, UNIT#612085......................$6,619 2005 ATLAS COPCO XAS186, AIR COMPRESSOR-DSL-250375 CFM, S/N USA013977, UNIT#589291....................$10,862

C O M PA C T I O N

2005 MULTIQUIP MRH800GS, ROLLER-SMOOTH-DD-1500# 26”, S/N N4034, UNIT #588093......................................$5,261 2005 WACKER RT820, W/B ROLLER-PADFOOT-3000#, S/N 5599982, UNIT #585071 ................................................$7,297 2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000#, S/N 5549433, UNIT #548636..................................................$8,558 2005 IR SD45D-COMBO, R/O ROLLER-VIB-SD 5T 54”, S/N 182289, UNIT #555319 ................................................$23,612

540/309-1709

SCISSORS

2004 GENIE GS1930, SCISSOR LIFT-15-19' DC, S/N GS300464946, UNIT #506376........................................$3,057 2005 JLG 2032E2, SCISSOR LIFT-20' DC-30-34", S/N 0200138716, UNIT #580396 ..........................................$4,768 2005 GENIE GS2032, SCISSOR LIFT-20' DC-30-34", S/N GS320576098, UNIT #581686 ................................$4,912 2004 SKYJACK SJIII-3226, SCISSOR LIFT-26' DC-30-32", S/N 272214, UNIT #515905 ..................................................$6,009 2005 GENIE GS2646, SCISSOR LIFT-25-26' DC-46-68", S/N GS460563998, UNIT #564334........................................$6,138 2005 SKYJACK SJIII-4632, SCISSOR LIFT-30-34' DC-46-69", S/N 711485, UNIT #541377............................................$9,284

FORKLIFTS

2005 DAEWOO G25E, IND FORKLIFT-5000 LB, S/N GA00539, UNIT #563670 ................................................................$9,964 2004 DAEWOO D35S, IND FORKLIFT-8000-9000 LB, S/N FZ00026, UNIT #513074 ..............................................$16,596 2004 GEHL RS5, RCH FORKLIFT-6000 LB 20-34', S/N RS5JV1211568, UNIT #539392....................................$20,104 2006 TEREX TX55-19, RCH FORKLIFT-FXD-5000 LB 18-24', S/N TX551913584, UNIT #613578 ...............................$22,037 2004 GEHL RS6, RCH FORKLIFT-6000 LB 35-39',S/N RS6JV0813119, UNIT #528082....................................$23,442 2004 LULL 644E-42, RCH FORKLIFT-6000 LB 40-45', S/N 0160003168, UNIT #484162 ........................................$24,328 2004 GRADALL 534D9-45, RCH FORKLIFT-9000 LB 35-45', S/N 0160003937, UNIT #499455 ........................................$31,025 2005 GEHL DL8L-42-CAB-HTR, RCH FORKLIFT-8000 LB 3545', S/N 8L42JW0135516, UNIT# 541583 ..................$37,351 2004 SKYTRAK 10054, RCH FORKLIFT-10000 LB 40-55, S/N 0160004344, UNIT #508084 ........................................$39,978

2005 BOBCAT S220, SKIDSTEER LOADER-1851-2200 LB, S/N 526215460, UNIT #590851 ........ .................................... $16,426

2004 DEERE 550H-LT CRAWLER DOZER, 75-84HP-STD TRACK, S/N T0550HX937358, UNIT $32,664 #512419........................$

2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000, S/N 5593138, UNIT #581593............ $8,558 ........................................$

2003 DEERE 200CLC, EXCAVATOR-42-48.9K LB-TRACK, S/N FF200CX504633, UNIT #480043 $50,833 ....................................$

2004 JLG G9-43A, RCH FORKLIFT-9000 LB 35-45', S/N 0160003850, UNIT #505796 ...... $30,525 ......................................$

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 21

Page 22 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2005 Komatsu WA200-5

ARTBA Urges Lawmakers to Pass Highway Funding PROJECTS from page 1

3725 hours, Cab w/AC & Heat, GP Bucket, Ride Control, Add’l Counterweight $79,500

Commerce Department’s Regional InputOutput Modeling System (RIMS II), Premo Black found the transportation construction industry’s largest economic impact is in the state of California, where it generates or sustains more than 354,000 jobs. California is followed by New York (286,449), Texas (276,276), Florida (196,087), Pennsylvania (148,669), Illinois (129,014), Georgia (106,658), Ohio (104,310), Washington (100,384) and New Jersey (97,036). Black said transportation construction activity generates $159.3 billion annually in direct and induced U.S. wages. These workers, she said, will contribute an estimated $13.1 billion in federal and state payroll taxes this year. But that is not the end of the story. “What is often overlooked “What is often overlooked is that the is that the work the transconstruction induswork the transportation construction portation try performs results in the longest-lived capital industry performs results in the nation’s assets,” Black pointed out. nation’s longest-lived capital assets. “And transportation inframakes all kinds of And transportation infrastructure structure other economic activity posmakes all kinds of other economic sible.” “Tourism, manufacturing, transportation and warehousactivity possible.” A l i s o n P re m o B l a c k ing, agriculture, forestry, general construction, mining, ARTBA retailing and wholesaling are all wholly dependent on the work done by the U.S. transportation conties and 1.7 million jobs sustained by transportation construction industry employee, struction industry,” Black said. “These, what firm and agency spending throughout the I call dependent industries, employ nearly 80 million American, who collectively earn U.S. economy. She cautioned that thousands of these jobs more than $2.8 trillion each year and pay could be in jeopardy if Congress fails to take over $233 billion in state and federal payroll action soon on a multi-year surface trans- taxes.” Black is an economics doctoral candidate portation program investment bill. The last multi-year transportation law at The George Washington University in the expired a year ago Oct. 1. Federal highway Nation’s Capital. She holds an M.A. in and transit aid to the states has been sus- International Economics and Latin tained over the past year by four short-term American Studies from the Johns Hopkins extensions and economic stimulus funding. School of Advanced International Studies. For more information, visit Utilizing U.S. Census Bureau “County www.artba.org Business Patterns” data and the U.S. The report, “The U.S. Transportation Construction Industry Profile,” released by the Transportation Development Foundation of ARTBA, shows the annual value of domestic transportation construction will surpass $120 billion this year. This ranks it larger than industry sectors like auto repair and maintenance ($116.8 billion), farming ($97.5 billion) and coal mining ($29.8 billion), to name a few. Alison Premo Black, ARTBA senior economist and the report’s author, found transportation construction supports 3.4 million American jobs — 1.7 million directly involved in construction and related activi-

This public service announcement is sponsored by Construction Equipment Guide.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 23

If Your Boom is BENT... We Can Make it RIGHT!

• Hydraulic and Conventional boom repair and manufacture • Rebuilding "telescoping boom" forklifts • ROPS Repairs/Rebuilds Certified to OSHA 29CFR1926.1001/1002

877-300-BOOM (2666) www.certifiedboomrepair.com

Page 24 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Maintenance, Operating Costs Projected to Grow Steadily BILL from page 1

“The likelihood that the House will be controlled by Republicans, bringing a change of dynamics, is pretty high,” said Jason Langford, manager of government affairs at the Washington, D.C., office of the Associated Equipment Distributors (AED). “If the GOP took over the House, and included several Tea Party types, that will generate hostility towards new spending bills or any spending, which is not offset by cuts in other places. It’s purely speculation, but my guess is that, if this happens, then seeing a bill that high ($450 billion) isn’t likely. The funding would probably be close to what was authorized in the previous bill in 2005.” (Appropriations under SAFETEA-LU averaged $42-billion per year. These were supplemented by a separate $27.5 billion for highways under the American Recovery and Reinvestment Act (ARRA) stimulus program begun in 2009.) A c t i o n R e q u i re d Highway and bridge construction has been funded by five short-term extensions since the previous highway and surface transportation act expired. These have continued funding at the previously authorized levels. The last of these extensions expires Dec. 31, 2010, requiring that a new law, or extension, be passed by a “lame duck” session of Congress between the mid-term elections and when the next Congress (the 112th) is sworn in during January. (No serious work on a highway bill is foreseen before the elections, which will occupy the attention of Congress until November.) The lame duck sessions would meet for a week in mid-November and then again in early December. “Congress must do something before the new year,” said Langford. “They could do a short-term extension into early next year, a mid-range extension of about one year, or they could possibly kick it into 2012 in a multi-year extension until after the presidential election. We’re guessing there will be an extension sometime next year.” In a Labor Day speech in Milwaukee, Wis., President Obama proposed spending $50 billion “up front” (probably during the first year of a new six-year bill). In a new twist, he said this would be “fully paid for” by eliminating tax breaks and subsidies for the oil and gas industry. “I don’t think the lame duck Congress would consider a new bill since the Obama Administration hasn’t provided any detail on what they want,” said Ken Simonson, chief economist of the Associated General Contractors of America (AGC) in Arlington, Va. “Usually Congress doesn’t get going [on a new bill] until it has a blueprint from the

Administration. I think it will pass some sort of extension by Dec. 31 and enact a new bill several months after the Administration prints its new budget next February.” E n o rm o u s I n f r a s t ru c t u re N e e d s One thing is certain: Infrastructure needs, and requisite funding, are enormous. Citing the recently released 2008 Department of Transportation report to Congress on the status of roads, bridges and transit, The Road Information Program (TRIP) in Washington, D.C., said in a September, 2010, report on America’s Roughest Rides: “The DOT study estimates that the annual investment needed to maintain urban roads and highways (excluding bridges) in their current condition is $26.6 billion annually — a 90 percent increase in annual funding.” TRIP said the annual investment to significantly improve the condition of these roads is $39 billion annually — a 171 percent increase in annual funding.” “Pavement conditions are likely to worsen under current funding levels,” TRIP said. “Through 2025, the U.S. faces a $189-billion shortfall in the cost to maintain urban roadways in their current condition and a $375-billion shortfall in the cost to make significant improvements to urban roadways.” TRIP research shows that overall vehicle travel increased by 39 percent from 1990 to 2008 and is expected to increase another 35 percent by 2030. Urban roadways carry 78 percent of the approximately 2 trillion miles driven each year in urban America. ARTBA’s Buechner performed a separate analysis of the DOT report in order to determine the funding needed to prevent congestion from worsening, rather than DOT’s target of maintaining user costs. Buechner said the anti-congestion goal “would require an annual investment of $119.5 billion,” adding that federal highway funding in the next highway bill should start at $69.5 billion, at minimum, and grow to $76.3 billion by 2015 just to maintain physical conditions and operating performance. (Buechner’s analysis assumes that the federal highway program continues to cover 42.5 percent of highway and bridge investment.) When costs of potential improvements are factored in, Buechner said federal highway spending would have to grow from $92.3 billion in Fiscal 2010 to $101.3 billion by Fiscal 2015, more than double the current level of federal highway investment. The American Society of Civil Engineers, in its annual “report card,” gives a failed

grade to the nation’s entire infrastructure while The American Association of State Highway and Transportation Officials (AASHTO) lists $80 billion of projects that need to be worked on. “In the last 20 years we’ve seen vehiclemiles double, cars on the road double and available transportation infrastructure capacity increase by (only) six percent,” said ARTBA’s Solsby. “We are choking on our own success. We have a real infrastructurecapacity crisis while India, the European Union and other global competitors are investing king’s ransom money in infrastructure not just for their own betterment but to

greater than any one source is capable of generating,” said Solsby. “All options, including infrastructure banks, need to be on the table. No one will say the gas tax isn’t very effective and very viable in continuing to provide substantial revenue on a year-toyear basis. The challenge is that you see an erosion of purchasing power in that revenue, an increase in the cost of materials, and increase in fuel efficiency, and some inflation. The revenue we’re taking in is far outpaced by the needs — the conditions and performance currently in the system.” Declared ARTBA’s Buechner: “Highway construction is financed by user fees. The problem is that gas tax revenues aren’t enough for continued funding at the current level. If Congress doesn’t enact some kind of user fee, which enhances revenue into the Highway Trust Fund, it doesn’t have a lot of options. One is to cut back on the federal highway program. The other is to dip into the General Fund, which would impact the deficit. It’s not a pretty S o l s b y picture. ARTBA supports the gas tax as the fastest, easiest way to go, ARTBA but, politically, it would be a very difficult way to go. They have to come up with something.” Some economists are saying that, without increasing taxes on both the top and middleincome tax brackets, the deficit could double to $3 trillion by 2020, endangering infrastructure and other programs.

“If we are going to compete in the global economy, we must start to match the investments of our competitors.” J e ff

compete with us. They’re eating our lunch, and likely our breakfast and dinner too. If we are going to compete in the global economy, we must start to match the investments of our competitors. It’s no secret that they have stolen the playbook, which we put together with our development and infrastructure system.” Nick Yaksich, vice president of global public policy at the Washington, D.C., office of the Association of Equipment Manufacturers (AEM), said: “We need a long-term six-year [highway and bridge] investment so that contractors can make proper investment decisions. If they know they have six years of work, they will buy cranes and other equipment to do that work. Equipment manufacturing revenue has declined about 50 percent, from about $120 billion in 2008 to about $60 billion in 2009.” President Obama, in his Labor Day speech, highlighted the need to fix 150,000 miles of roads, lay or rebuild 4,000 miles of railroad track and refurbish some 150 miles of airport runways. R a i s e t h e G a s Ta x ? How would Congress fund a vastly expanded highway and bridge program over the next six years? Many construction industry organizations are calling for increasing the federal tax on gasoline, perhaps by 10 to 13 cents per gallon. “The funding needs, which we have are

I n f r a s t ru c t u re B a n k A p p ro a c h In his Labor Day speech, President Obama backed more infrastructure banks — public/private partnerships, which fund projects with private, rather than federal or state, money. Directed by the federal government, infrastructure banks, under some proposals, would be part of the U.S. Treasury, pooling tax dollars with private investment from institutional investors to fund highway and other infrastructure projects. Proponents say a panel would approve projects on merit, rather than depending on political power in Congress. “It [the bank] will change the way Washington spends your tax dollars,” Obama said in his Milwaukee speech, “reforming the haphazard and patchwork way we fund and maintain our infrastructure to focus less on earmarks and outdated formulas and more on competition and innovation that gives us the best bang for the buck.” Advocates of the infrastructure bank include Gov. Arnold Schwarzenegger (R.see BILL page 48

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 25

AMERICA’S HOME FOR “The safest coupler on the planet!”

I lock in safety for my crews with Wedgelock couplers and buckets

With the I-Lock™ back-up coupling system, Wedgelock couplers add instant safety to my jobsite • I-Lock system instantly engages the front attachment pin, automatically • optimum break-out force with high strength, wearability, light weight • over 45,000 Wedgelock couplers in service worldwide • fit all makes, models and sizes of excavators and attachments • full range of Wedgelock buckets and attachments available

Call or click for “the safest coupler on the planet!” Norco Attachments, LLC • 5850 Padre Island Hwy. • Brownsville, TX 78520

1-877-286-3411 • www.norcoattachments.com

Norco Attachments is the exclusive North American manufacturer of the complete line of Wedgelock buckets & thumbs, grapples, rakes, spades and rippers for any excavator size, make or model from 5,000 to 200,000 lbs. DEALERS! Call Mike Hinson for opportunities in your area: 1-877-286-3411

Page 26 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

All New in Box CALL Toll Free

800-523-2200 Ext. 197

Komatsu 960E Mining Truck ........................................$250

Caterpillar 797F Off-Highway Truck ............................$230 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ..............$70 Bantam C-35 Crawler Backhoe, 1:50 Scale......................$60 Bantam C-35 Crawler Shovel, 1:50 scale ........................$60 Bantam C-35 Dragline, 1:50 Scale ..................................$60 Bobcat A300 Wheel Loader, 1:25 Scale ..........................$30 Bobcat M610 Golden 50th Anniversary Skid Steer Loader .... ..........................................................................................$45 Bobcat S175 Skid Steer Loader, 1:50 Scale ....................$18 Bobcat Tractor/Trailer Set, 1:50 Scale ..............................$80 Caterpillar Vintage Twenty Tractor w/metal tracks, 1:16 Scale ..................................................................................$60 Caterpillar No. 12 Motor Grader, 1:87 Scale....................$25 Caterpillar AP655D Paver, 1:50 Scale ..............................$55 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale ...... ..........................................................................................$40 Caterpillar D6K XL Track Type Tractor, 1:50 Scale ..........$45 Caterpillar D7E Track Type Tractor, 1:50 Scale ................$60 Caterpillar D8R Track Type Tractor, 1:50 Scale................$40 Caterpillar D10T Track Type Tractor, 1:50 Scale ..............$75 Caterpillar D11R Track Type Tractor, 1:50 Scale..............$45 Caterpillar 140H Motor Grader w/ripper & scarifier, 1:50 Scale ..................................................................................$40 Caterpillar 140M Motor Grader, 1:50 Scale ....................$60 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale ...... ..........................................................................................$30 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ........$30 Caterpillar 272C Skid Steer Loader, 1:32 Scale ..............$30 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ..................$35

Bobcat Tractor/Trailer Set ..............................................$75

Caterpillar 323D L Excavator, 1:50 Scale............................$50 Caterpillar 365B Excavator, 1:50 Scale ..............................$40 Caterpillar 365C L Front Shovel, 1:50 w/metal tracks........$65 Caterpillar 420E Backhoe/Loader, 1:50 Scale ..................$45 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale $45 Caterpillar 511OB Excavator, 1:50 Scale..........................$70 Caterpillar 611 Motor Scraper in display case, 1:64 Scale.... ............................................................................................$9 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale ....$35 Caterpillar 725D Articulated Truck, 1:50 Scale ................$30 Caterpillar 777D Off-Highway Truck, 1:50 Scale..............$40 Caterpillar 797F Off-Highway Truck, 1:50 Scale ............$260 Caterpillar 825H Soil Compactor, 1:50 Scale ..................$35 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale ..$35 Caterpillar 950H Wheel Loader, 1:50 Scale........................$45 Caterpillar 963D Track Loader, 1:50 Scale..........................$45 Caterpillar 966A Wheel Loader, 1:50 Scale ....................$45 Caterpillar 977 Traxcavator, 1:50 Scale ..........................$30 Caterpillar 988H Wheel Loader, 1:64 Scale ....................$30 Caterpillar 992G Wheel Loader, 1:50 Scale ....................$50 Set of Four Caterpillar Machines, 1:87 Scale ..................$75 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................................$45 International TD-15 Dozer, 1:87 Scale..............................$40 International TD-24 Ag/Crawler, 1:50 Scale ....................$40 International TD-25 Dozer, 1:87 Scale..............................$40 JCB 3CX Backhoe Loader, 1:50 Scale ..............................$45 JCB 456 ZX Wheel Loader, 1:50 Scale ............................$65 JCB Vibromax VM 115 Soil Compactor, 1:50 Scale ........$35 John Deere MC Crawler Dozer, 1:16 scale ......................$75 John Deere MT Gas Farm Tractor, 1:16 Scale..................$50 Komatsu 960E Mining Truck, 1:50 Scale ........................$275 Komatsu PC300LC-8 Excavator, 1:50 Scale......................$70 Komatsu WA500-6 Wheel Loader, 1:50 Scale..................$60 Komatsu D51 EX Dozer, 1:50 Scale ..................................$60 Komatsu D51 PX Dozer, 1:50 Scale ..................................$55 Komatsu D375 Dozer, 1:50 Scale......................................$70 Komatsu GD655 Motor Grader, 1:50 Scale ......................$60 Komatsu HD605 Off-Highway Truck, 1:50 Scale ..............$70 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ..................................................................................$75 Komatsu PC2000-8 Front Shovel, 1:50 Scale ................$225 Komatsu SK1020 Skid Steer Loader, 1:25 Scale..............$40 Komatsu SK1026 Skid Steer Loader, 1:25 Scale..............$40

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Link-Belt 3200 All Terrain Crane, 1:50 Scale ................$180 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ........$165 LeTourneau Super C Scraper w/Cab, 1:50 Scale..............$80 Set of three Mack Granite Dump Trucks, 1:64 Scale ....$115 Northwest 25-D Backhoe, 1:50 Scale ..............................$90 Northwest 25-D Shovel, 1:50 Scale ..................................$90 Oliver OC-12 Dozer, 1:16 Scale ........................................$50 Volvo SD-122 Soil Compactor, 1:72 Scale ......................$40 Volvo A25C Articulated Truck, 1:50 Scale ........................$30 Volvo BL71 Backhoe Loader, 1:50 Scale ..........................$45 Volvo FH12 Tractor/Trailer w/Volvo L150C, 1:50 Scale....$55 Volvo L90E Wheel Loader, 1:50 Scale ............................$70 Volvo L60E Wheel Loader w/Attachments, 1:50 Scale ....$45 Volvo L150C Wheel Loader, 1:50 Scale ..........................$35 Volvo L350F Wheel Loader, 1:50 Scale............................$80

VINTAGE SPECIALS

Bobcat 225 Mini-Excavator, 1:25 Scale ......................$42.50 Caterpillar 611 Scraper, 1:64 Scale..................................$15 Conexpo 2005 Con/Agg, 1:50 Scale ............................$42.50 International TD20E Dozer, 1:64 Scale ............................$20 JCB 435 Compact Wheel Loader, 1:50 Scale ..................$15 Melroe Bobcat M200 Skid Steer Loader, No Box, 1:25 Scale ..........................................................................................$29 Volvo A25 Articulated Truck, 1:50 Scale ..........................$15 Yanmar B37 Mini-Excavator, 1:32 Scale ..........................$15

LeTorneau Super C Scraper............................................$75

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ October 20, 2010 â€¢ Page 27

COWIN EQUIPMENT COMPANY, INC. 5710 Riverview Road Mableton, GA 30126 404/696-7210

M & L INDUSTRIES INC. Houma, LA 985/876-2280 Broussard, LA 337/837-2763 Baton Rouge, LA 225/355-7716 Metairie, LA 504/885-8932

! ! $ ! ! $ " " " ! ! ! ! $

$ !

$ $ ! # !

Page 28 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Project Contracts, Agreements Represent New Thinking RICHMOND from page 1

The project will provide a direct link to Richmond International Airport from Pocahontas 895 to Airport Drive at Charles City Road. It is expected to shorten the trip to the airport by up to 10 minutes, bypassing four traffic signals and a rail crossing. The new road will be 1.6 miles (2.5 km) long, with two lanes in each direction. In addition, the project will include the construction of three new bridges. One existing bridge will also be widened. A new interchange will be constructed with Pocahontas 895, and intersections will also be created with Seven Hills Boulevard and Charles City Road. “What makes this project unique isn’t the engineering design or the construction method,” explained Mary Ellin Arch, communications and community relations specialist. “The Airport Connector project is unique as a result of the combination of agreements and contracts that control how it is administered. The project is made possible by a federal TIFIAloan. Transurban has put in place a number of specific reporting and review processes — including the hiring of an independent engineer — to meet requirements associated with this innovative federal loan program.” In addition, Arch noted that the Airport Connector project is governed by Transurban’s concession agreement with VDOT. This longterm agreement obligates Transurban to maintain the roadway until 2105 and also allows Transurban to collect tolls. Actual ownership of the Airport Connector, and Pocahontas 895, remains with VDOT at all times. The design and construction are governed by the design-build contract with American Infrastructure. “Project Manager Rich Prezioso balances the needs of a multitude of stakeholders,” Arch said. “These include American Infrastructure, VDOT, FHWA, the Capital Region Airport Commission that manages Richmond International Airport, the county of Henrico utilities and public works departments, the city of Richmond utilities department and the independent engineer and quality assurance manager assigned to the project.” Stakeholders also include the toll system vendor, the CSXT Railroad that passes through the Connector’s route and adjoining landowners including an estate that hopes to build an industrial park on wooded land on either side of the road. “It is exciting to be a part of a project where we are the first to combine many of these features into one project,” Prezioso said. “Often we look for examples of how something was handled in the past on similar projects, and the response we get is that it hasn’t been done before.” Arch noted that the project is currently on schedule, and in fact may reach substantial completion ahead of schedule. Safety is a top priority, and at press time, the project had gone more than 530 days without a lost-time accident. Safety meetings are held regularly to identify specific issues and resolve potential safety concerns. Safety training is mandated. “The project is providing jobs for Virginians during tough economic times,” Arch said. “It uses local subcontractors, including small and disadvantaged businesses. The project will support economic growth in southeastern suburban Richmond.”

Safety is a top priority and at press time the project had gone more than 530 days without a lost-time accident.

Roadwork that took place in the spring.

(91,746 cu. m) of sand backfill, 2,500 cu. yds. (1,911 cu. m) of cast-in-place concrete, 180,000 cu. yds. (13,761 cu. m) of moved earth, and 40,000 tons (36,287 t) of asphalt. Major subcontractors for the project include DW Lyle, Clarksville, Va, for bridges 603 and 605; DW Cary, Richmond, for trucking; Snead Trucking, Richmond, for trucking; McDonough Bolyard Peck, Richmond, for quality assurance; Dewberry, Glen Allen, Va., engineer of record; Lee Hy Paving, Richmond, for paving; Midasco, Ekridge, Md., for signs; A&M Crews at work on one of the three bridges being constructed. Concrete, Dulles, Va., for concrete curb; LS Lee, Richmond, for guardrail; DT Read, Richmond, for reinforcing steel installer; Froehling & Robertson, Richmond, for miscellaneous concrete; and Slurry Paving, Richmond, for calcement/lime stabilization. Major equipment for the job includes a Caterpillar 328 excavator, a Komatsu PC228 excavator, a Caterpillar rubbertired loader, a Caterpillar 430D backhoe, a Caterpillar 60-in. (152 cm) trench roller, Caterpillar D5 and D8 dozers, a Caterpillar grader, a Caterpillar 236B2 skid steer, a Bidwell concrete paver, a 180-ton (163 t) Link-Belt crane and an 80ton (92 t) Grove hydraulic crane. Pocahontas 895 is an 8.8-mile (14.1 km) cash and fully electronic toll road with an elevated bridge crossing the James River. It is located southeast of Richmond, and links Interstate 95 at Chippenham Parkway (Route 150) with Interstate 295 to create a southern bypass of the city. It is the The Airport Connector project is unique as a result of the combination of agreements and contracts that con- only crossing of the James River for 6 mi. (9.6 km) in either direction. trol how it is administered. The Commonwealth of Virginia, which planned and conArch also noted that, although it is still in the very early structed Pocahontas 895, has formed a public-private partplanning stages, the project will include a cultural compo- nership with Transurban, giving it a 99-year lease to manage nent recognizing the significant Civil War history of the area. and maintain the road. According to Gregg Newhouse, senior project manager of The road opened in 2002, and Transurban assumed manAmerican Infrastructure of Virginia, the project presented agement of Pocahontas 895 in June 2006 from VDOT. several challenges. They included timely MSE wall settle- Transurban is a leading international toll road manager with ment, the wet spring weather, maintenance of traffic and traf- offices in the United States and Australia. fic control, efficient subcontractor coordination, consistent (This story also can be found on Construction lime stabilization and continued safety. Equipment Guide’s Web site at www.constructionequipThe project includes 60,000 tons (54,431 t) of stone, mentguide.com.) CEG 131,000 sq. ft. (12,170 sq m) of MSE walls, 120,000 cu. yds.

PROFESSIONAL

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ October 20, 2010 â€˘ Page 29

SHORING & SUPPLY Your Complete Rental Resource!

VWHHO WUHQFK VKLHOG

PDQKROH VKLHOG

VWRQH PL]HUÂŽ

VOLGH UDLO V\VWHP

Top models for great performance JDV PRQLWRUV

EXLOG D ER[ÂŒ PRGXODU

K\GUDXOLF YHUWLFDO VKRUHV

SLSH SOXJV

ORLANDO

11128 Boggy Creek Rd Orlando, FL 32824 2IĂ€FH 407-854-9949 )D[

YOUR COMPLETE RENTAL RESOURCE H K K

H K K

TAMPA

5013 E. Broadway Ave. Tampa, FL 33619 2IĂ€FH )D[ JACKSONVILLE 2750 Imeson Road -DFNVRQYLOOH )/ 2IĂ€FH )D[

â€˘ â€˘ â€˘ â€˘ â€˘ â€˘ â€˘ â€˘

Other Supplies:

road plate DOXPLQXP VKLHOGV SRUWD WDQNÂŒ WULSRG ZLQFK KDUQHVVHV HOHFWULF EORZHU KRVH JDV EORZHU KRVH PDQKROH JXDUG

a keeplow

With powerful Yanmar diesel engines, the 3640E and 4240E models are little giants that maneuver easily in tight spaces and handle tough jobsite challenges. â€˘ &RPSDFW ORZ SURÂżOH GHVLJQ IRU PDQHXYHUDELOLW\ LQ QDUURZ ORZ FOHDUDQFH DUHDV â€˘ All-TachÂŽ DWWDFKPHQW PRXQWLQJ V\VWHP FRPSDWLEOH ZLWK PRVW DWWDFKPHQWV â€˘ ,PSURYHG GULYH FRQWUROV UHTXLUH OHVV HIIRUW DQG UHGXFH RSHUDWRU IDWLJXH â€˘ 6SDFLRXV RSHUDWRUÂśV FRPSDUWPHQW ZLWK FKRLFH RI 7 EDU ÂłKDQGV RQO\Â´ RU KDQG IRRW FRQWUROV

Dealer Imprint

Dynapac is proud to present several new pneumatic tired rollers: the CP224, CP224W and CP274. Dynapacâ€™s pneumatic tired rollers DUH GHVLJQHG WR HQKDQFH HIÂżFLHQF\ VHUYLFHDELOLW\ RSHUDWRU VDIHty and comfort. Exceptional features include a smooth start-stop system when FKDQJLQJ GULYLQJ GLUHFWLRQ ZLGH EDVH WLUHV DLU RQ WKH UXQ DQG D EDFN XS VSULQNOHU V\VWHP Dynapacâ€™s new F1000 series wheeled or tracked asphalt pavers KDYH EHHQ GHVLJQHG HVSHFLDOO\ IRU WKH 1RUWK $PHULFDQ PDUNHW 7KH\ KDYH WKH ORZHVW GHFN KHLJKW LQ WKH LQGXVWU\ DQG IHDWXUH 3/4-inch formed KRSSHU ZLQJV WKDW GHOLYHU DVSKDOW WR D KLJK FDSDFLW\ VODW FRQYH\RU $ KLJK SHUIRUPDQFH RXWERDUG DXJHU GULYH DQG WKH FRQYH\RU GHVLJQ eliminates center line segregation.

2IĂ€FLDO (IĂ€FLHQF\ 3URGXFWLRQ WUHQFK VKLHOGLQJ VKRULQJ HTXLSPHQW GLVWULEXWRU

PROFILE

Great performance from Dynapacâ€™s rollers and pavers

Dynapacâ€™s drum rollers KDYH D SHUIHFW YLHZ RI GUXP HGJHV VXUIDFHV DQG VSULQNOHU QR]]OHV (YHQ WKH ODUJHVW PRGHO OHWV WKH RSHUDWRU VHH DQ REMHFW feet high, at only 3 feet away.

DON ALLISON EQUIPMENT, INC. 233 Melville Road Arley, AL 35541 800-669-6450 205-387-1600 Fax: 205-387-1668

:DQW WR NQRZ PRUH" +DYH D FORVHU ORRN DW dynapac.com.

FLINT EQUIPMENT COMPANY Albany, GA 229/888-1212 Adairsville, GA 770/773-9857 Atlanta, GA 404/691-9445 Grovetown, GA 770/965-1889 Columbus, GA 706/687-3344 Macon, GA 478/788-1586

Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688

TRACTOR & EQUIPMENT CO. Alabaster, AL 205/621-2489 Anniston, AL 256/831-2440 Birmingham, AL 205/591-2131 Decatur, AL 256/355-0305 Dothan, AL 334/678-1832 Grove Hill, AL 334/275-4158

3DUW RI WKH $WODV &RSFR *URXS gehl.com

www.dynapac.com

Mobile, AL 251/457-8991 Montgomery, AL 334/288-6580 Shoals Area, AL 256/383-5666 Tuscaloosa, AL 205/752-0621 Panama City, FL 850/763-4654 Pensacola, FL 850/505-0550

Page 30 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Trucks & Trailers

SECTION

Brake Plan Helps Truck Operators Better Prepare for Winter Each winter, local, state, and provincial highway agencies use liquid de-icers in their battle against snow and ice in an effort to save money and to reduce the impact of sand on air and groundwater quality. The highway agencies spray magnesium chloride and calcium chloride on pavement in advance of a coming storm or they mix the chemicals with salt and sand. “Since these chemicals don’t readily evaporate and are highly soluble in water, chemical de-icers stick around and prevent ice from forming on the roadways, making snow removal easier,” said Jeff Sass, general marketing manager of Paccar Parts. “But those same qualities make it easier for the corrosive chemicals to penetrate truck components like brakes.” “Roadleveler offers new and remanufactured brake components that can last longer and perform more reliably under these corrosive conditions,” Sass said. “In order to eliminate uneven wear allowing for greater stopping power and longer life, each Roadleveler brake shoe is coined,” Sass added. Coining is a form of precision stamping where each Roadleveler brake shoe is stamped like a minted coin in a 1,000-ton hydraulic press. This ensures that the radius and depth of the shoe table is manufactured to OEM tolerances.” Coining also eliminates the gaps between the shoe table and the friction material to prevent water and road chemical de-icers from seeping behind the friction material, Sass said. “A special anti-corrosion hydraplex enamel coating that’s first applied through full immersion sets the Roadleveler product apart,” Sass said. This full immersion doesn’t leave surfaces exposed to possible environmental contaminants like chemical de-icers. Then the enamel coating is baked on at 200 degrees for several cycles to ensure proper adhesion, rather than spraying on a waterbased coating that’s air dried and prone to rust jacking. “Rust jacking, or the build up of rust behind the friction material on brake shoes,

Highway agencies spray magnesium chloride and calcium chloride on pavement in advance of a coming storm or they mix the chemicals with salt and sand to make snow removal easier. These corrosive chemicals can penetrate truck components like brakes.

can cause brake linings to lift and crack, a leading cause of out-of-service violations during brake inspections,” Sass added. According to the Commercial Vehicle Safety Alliance (CVSA), one out of every three trucks inspected during last year’s annual brake inspection was sidelined due to defects with brakes or with their components or adjustments. “Truck operators can be better prepared for the upcoming winter by having Roadleveler brake components installed,” Sass said.

About Roadleveler Roadleveler is a licensed Paccar brand of precision fit replacement parts including brake shoes and hardware kits, ride-control and steering components, including shock absorbers. Roadleveler products are sold exclusively in North America.

In order to eliminate uneven wear allowing for greater stopping power and longer life, each Roadleveler brake shoe is coined, ensuring that the radius and depth of the shoe table is manufactured to OEM tolerances.

All Roadleveler brake products meet or exceed Federal Motor Vehicle Safety Standard 121. Paccar Parts distributes Roadleveler brake products exclusively through Kenworth and Peterbilt dealers in the United States and Canada. For more information, visit www.RoadLevelertruckparts.com.

Page 32 • October 20, 2010 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Standard with the features you want and built with any options you need, we know the most important thing about your detach is the cargo that it is carrying, that’s why each model is custom designed around your wants and needs. • Capacities: 35 ton to 60 ton

• Tru-lock system (patent pending)

• 5-Position Quick Change Load Block - Capable of 15 Positions

• Shear Bolt Protected Top Plate

• T-1 Fully Cambered Tapered Beam

• 2400 PSI Hydraulic Low Pressure Requirements

• True 30” Scraper Neck Design

*X-FORCE Models: Aluminum Wheel Upgrade on outer duals only. Valid on orders processed after 8-1-10. Limited Time Offer.

LB’s Trailer Sales

2904 Harmony Highway • Harmony, NC 28634 (704) 546-2231

UltraShift HV Transmission Available in Ford’s F650, F750 Eaton Corporation’s UltraShift Highway Value (HV) transmission is now available as a data book option for Ford F650 Super Duty and Ford F750 Super Duty series trucks. The UltraShift HV transmission is a fully automated transmission for Class 6 and 7 vehicles with diesel engines in the 195 to 260 hp (145 to 194 kW) range. Tests conducted by an independent firm in accordance with SAE J1526 Joint TMC/SAE Fuel Consumption In-Service Test Procedure, Type III determined that the UltraShift HV transmission delivers better fuel efficiency in a variety of duty cycles than a conventional automatic transmission. “With this latest agreement with Ford, we continue to expand the availability of our medium duty transmissions,” said Dontia M. Warren, medium duty market development manager of Eaton’s truck business. “More and more original equipment manufacturers are selecting the UltraShift HV so they can pass along to their customers the fuel-saving features of an automated transmission.” Todd Kaufmam, F-Super Duty/LCF Chassis Cab marketing manager with Ford, added, “Ford has always been committed to offering our truck customers the best available solutions to reduce operating expenses and thereby help all of them operate profitably. With its fuel-saving, low-maintenance and low-cost of

operation features, we believe the UltraShift HV will go a long way to further reinforce this commitment.” The HV is capable of handling

torque capacities up to 600 ft. lbs. and loads up to 33,000 lbs. (15,000 kg) gross vehicle weight. The UltraShift HV transmission is ideally suited for pickup/delivery, service/utility and recovery applications. Additional key features and benefits of the UltraShift HV transmission include: • No scheduled maintenance: no filters to change feature provides lower maintenance and reduced downtime costs. • Hill assist: automatically minimizes rollback on up to 10 percent grades while the operator makes the transition from the brake pedal to the accelerator, which benefits the driver in both uphill and downhill stop and start situations. • Modular design: provides more rapid service and reduced service costs. • Commonality: electronics modules and shift controls used on other Fuller manual and automated transmissions allow service providers to reduce service parts inventories and speed training and certification of technicians. For more information, call 800/826-HELP or visit www.roadranger.com. The UltraShift HV transmission is a fully automated transmission for Class 6 and 7 vehicles with diesel engines in the 195 to 260 hp. (145 to 194 kW) range.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • October 20, 2010 • Page 33

INDUSTRIAL TRACTOR COMPANY Jacksonville, FL 904-296-5000 www.industrialtractor.com Lake City, FL 386-752-9544 Palatka, FL 386-325-6268 Savannah, GA 912-964-7370 Brunswick, GA 912-264-6161 Andrews, SC 843-221-4940 Ladson (Charleston), SC 843-572-0400 Walterboro, SC 843-539-1420

KELLY TRACTOR Miami, FL 305-592-5360 www.ktccat@kellytractor.com Davie, FL 954-581-8181 Fort Myers, FL 239-693-9233 Clewiston, FL 863-983-8177 West Palm Beach 561-683-1231

TIGER EQUIPMENT www.tigerequipment.com

4181 New Bern Hwy Jacksonville, NC 28546 910-346-1932

805 Old Roberts Rd Benson, NC 27504 919-989-0066

Page 34 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crushing, Screening & Recycling Section ASC Rises to Challenge of Maintaining Sennebogen Image As a mature company servicing a mature market, ASC Construction Equipment USA Inc. is accustomed to creating new opportunities for growth. So when Sennebogen’s former exclusive dealer in North Carolina and South Carolina decided to get out of the equipment business, ASC didn’t hesitate signing a dealership agreement with a manufacturer that shared similar business philosophies. Constantino Lannes, president of Sennebogen LLC, recently announced that ASC Construction Equipment USA Inc. has been appointed as the newest addition to the company’s growing distributor network for Sennebogen. ASC will represent Sennebogen products from eight branches located in North Carolina and South Carolina. Brad Stimmel, president of ASC said that Sennebogen first came to his attention as ASC was refocusing on new markets. “I made a list of the other nontraditional market segments that I felt needed more focus. On top of that list was aggregates, road paving and scrap. When I started to investigate the scrap industry, I saw that there were several good manufacturers. But, after studying the market and the options, Sennebogen became my first choice,” explained Stimmel. “Sennebogen is the market leader and their business philosophy is similar to ours, to become partners with their dealers in order to better serve customers.” Stimmel said the addition of Sennebogen’s green line of material handling machines will work well to complement ASC’s total product offering. “There is some overlap of the customers we serve. We are

(L-R) are Brad Stimmel, Rob Tavenner (in back), Jess Butcher and Patrick Overstreet, all of ASC Construction Equipment USA Inc.

already serving some markets with our current product mix, but the Sennebogen line provides us with the opportunity to meet the needs of the yards where we are not as well established. More importantly, it gives a more rounded and complete line-up for that client so we can go in and talk about their needs for everything from wheel loaders to material handlers and everything in between,” he said. “Essentially, we now offer another tool. There is a lot of synergy between the Sennebogen and the Volvo line and customers who we are already doing business with

will benefit from this.” Stimmel felt that Sennebogen provides ASC with an ideal line to further penetrate markets that it is already serving with its material handling equipment for scrap, C&D, transfer stations, ports, forestry and terminal operations. “Sennebogen offers purposebuilt machines, but it also is a purpose-built company highly focused on the market it serves. During our research, we realized that the other OEMs for material handlers has a less focused approach and are involved with a lot of other businesses,” he said.

“Sennebogen is strictly focused on the material handling business and they are focused on making the best product for that industry with the most complete line.” Raising the Bar Having taken over the Sennebogen line from the previous dealer that had already set a high bar for service support, Stimmel said the challenge for ASC will be to maintain that bar and raise it even higher. “From Sennebogen’s perspective, the company already has a strong presence in the scrap indus-

try so we are going to continue on with that legacy. What we bring to the table is a focus in the forestry, waste, and aggregates industry, as Volvo already has a significant presence in those industries. With Sennebogen in our portfolio, we can now be a one stop shop for our customers.” In order to achieve that objective, Stimmel indicated that ASC has been fortunate to be able to recruit several of the previous dealer’s employees. Additionally, ASC and its entire sales and maintenance staff are undergoing extensive service and sales training on the Sennebogen line. One method used by ASC is to employ segment specialists. These are highly trained and experienced process specialists in a given industry. With advanced knowledge of machines and their applications, the segment specialists act as consultants for their customers who use them as a resource for technical specification on certain machines. “We started this two years ago. The first one is for aggregates, the next one was for road paving, and a third for portable air compressors. We are going to add a material handling specialist also. Having this will allow us to offer a complete solution to many of our customers.” ASC has a number of machines already on order and they will be parked on display at the company’s location in Piedmont, S.C., which is located right on the Interstate Highway. “There is a lot of traffic going up and down that road and these machines will be highly visible,” said Stimmel. “It is important for us that people recognize ASC as a Sennebogen dealer.” see ASC page 42

Page 36 • October 20, 2010 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

PERFORMANCE REDEFINED Kleemann: Combining process knowledge, technology, superior quality and product support. MOBICAT MC 110-Z

Reversible 44” x 28” Jaw crusher Fully independent double-deck pre-screen for highly effective material separation prior to crushing Optional final product screen Gap setting adjusted and set by hydraulics Onboard diagnostic system for remote maintenance Designed for ease of transport and quick set-up

ROAD AND MINERAL TECHNOLOGIES

www.linderco.com

www.wirtgenamerica.com

Asheville, NC 828-681-5172

High Point, NC 336-665-0110

Columbia, SC 803-794-6150

Ft. Myers, FL 239-337-1313

Orlando, FL 407-849-6560

Pembroke Pines, FL 954-433-2800

Charlotte, NC 704-376-7554

Raleigh, NC 919-851-2030

Greer, SC 864-877-8962

Jacksonville, FL 904-786-6710

Plant City, FL 813-754-2727

West Palm Beach, FL 561-863-0570

Greenville, NC 252-695-6200

Wilmington, NC 910-254-2031

North Charleston, SC 843-552-0095

Ocala, FL 352-629-7585

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • October 20, 2010 • Page 37

THE REVOLUTION BEGINS...

EXODUS MACHINES INNOVATIVE

AMERICAN MADE

NO COMPROMISE

JOIN THE REVOLUTION Florida

North Carolina

South Carolina

Ft. Myers • 239-337-1313 Jacksonville • 904-786-6710 Ocala • 352-629-7585 Orlando • 407-849-6560 Pembroke Pines • 954-433-2800 Plant City • 813-754-2727 West Palm Beach • 561-863-0570

Asheville • 828-681-5172 Charlotte • 704-376-7554 Greenville • 252-695-6200 High Point • 336-665-0110 Raleigh • 919-851-2030 Wilmington • 910-254-2031

Columbia • 803-794-6150 Greer • 864-877-8962 North Charleston • 843-552-0095

Page 38 â€¢ October 20, 2010 â€¢ www.constructionequipmentguide.com â€¢ Crushing, Screening & Recycling Section â€¢ Construction Equipment Guide

These Grinders Mean Business.

Visit One of These DuraTech Dealers Today!

5064 Horizontal Grinder 'XUD7HFKÂ·V YHUVDWLOH 1(: +RUL]RQWDO *ULQGHU LV EXLOW WR PHHW DOO \RXU JULQGLQJ QHHGV 1RW RQO\ LV WKH DYDLODEOH RQ HLWKHU D WUDFN RU WUDLOHU EXW \RX FDQ DOVR FKRRVH IURP WKUHH GLIIHUHQW OHYHOV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS NZ WR KS NZ 7KH ODUJH IHHG RSHQLQJ DQG LQ KDPPHUPLOO PD[LPL]H JULQGLQJ FDSDFLW\ DQG PLQLPL]H MRE WLPH 7KLV PLGVL]HG JULQGHU LQFUHDVHV \RXU HIÃ€FLHQF\ DQG PD[LPL]HV \RXU LQYHVWPHQW

CMI Equipment Sales, Inc. 2405 Dickerson Rd. Nashville, TN 37207 615-227-7800 Fax: 615-227-4013 www.cmiequip.com

PO Box 1940 â€¢ Jamestown, ND 58402-1940

REMU Screening Buckets

Even more productive than big trommels!

!":)2"$'-'6;<"+.2,,6'6;<"+,%/2/1'6;<"/,2/1'6;<"%/77'6;",1.= !">)2?+"5,44"5'1&"$)'+1"/67"7'3@.*41"$/1,2'/4+

Screening Buckets & Amphibious Excavators !!!"#$%&"'

()**+,#$$+

-. /// 011+11./+

2%34*"+

&536#$%&"'+

Big Float Amphibious Excavators

!"#$%&'(')*+",-./0/1)2"3)2"+&/44)5"/67"$/2+&4/67+ !"8972/*4'."%)61))6"+12*.1*2,"./6"(,"6/22)5,7"3)2"12/6+%)21/1')6

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • October 20, 2010 • Page 39

www.powerscreencrushingandscreening.com

USED EQUIPMENT FOR SALE Terex Pegson 1412 Trakpactor 54”x48” Hazemag Horizontal Impactor. Hydraulic Release & Hydraulic Adjust Aprons. 2006, Fully Reconditioned ...... Priced to sell $485,000 Powerscreen Warrior 1400, 2005 Model with approx. Priced to sell $114,500 2200 Hours ..........................P

Terex Pegson XR400, 26"x 44" Tracked Jaw Crusher with Hydraulic Release, 2008 Model, Approx. 2000 Priced to sell $325,000 Hours, 3 Months Warranty....P

Terex Pegson Metrotrak, 24" x 36" Tracked Jaw Crusher, 2008 Model, approx. 1250 Hours, like new condition with remaining factory warranty.................. Reduced Price $310,000 $260,000 ..........................R

Powerscreen Horizon 6'x20' 3 Deck Horizontal Track Mounted Screen, 2006 model with approx. 1400 Priced to sell at $245,000 Hours, in good condition ..P

Sales • Service • Parts • Rentals • Financing Serving the Carolinas, Virginia & West Virginia

Page 40 • October 20, 2010 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

Norco Equipment Introduces Its First-Ever Grinder Building on its Dynamic line of Cone-Head chippers, Norco Equipment has introduced its first-ever grinder, the Dynamic 5240 horizontal model. Powered by a fuel-efficient Volvo Tier III 425 hp (317 kW) engine, the Dynamic 5240 grinder will produce up to 200 cu. yd. (153 cu m)/hr from infeed materials of up to 18 in. (45.7 cm) diameter. The grinder operates with a 52 in. (132 cm) wide hammermill and can convert from swing to fixed hammers in as little as 45 minutes. Chuck Dull, senior vice president — sales and marketing at Norco Equipment, said that the 5240 grinder meets Dynamic design goals by providing a simple but rugged machine to help forestry, biomass, and recycling operations spend more time producing at less cost. Designed to serve a wide range of small to medium-sized grinding applications, the Dynamic 5240 will process material including biomass in the woods, slab wood at the sawmill, tree debris from storm clean-up and site clearing projects, and wood scrap from demolition sites. Switching to swing hammers, the 5240 quickly becomes an equally productive regrind station, according to the manufacturer. Sipping fuel at just 12 to 14 gal. (45 to 53 L)/hr at full production, the 5240 grinder also is rugged enough to stand up to demanding, high volume applications with its Transfluid coupler. As a true hydraulic fluid coupler, the Transfluid simplifies service and reduces downtime with no wear parts, and provides anti-jam protection for the hammermill and drive line. The infeed hopper provides a 54 in. by 16 ft. (137 cm by 4.8 m) loading capacity. Processed material is sized through

The 5240 horizontal grinder is ideal for primary and regrinding operations.

Fecon Inc. Enhances Its Web Site Pallets and other urban wood waste are quickly handled by the Dynamic 5240.

Fecon Inc.’s enhanced Web site provides online visitors with improvements in navigation, uniformity and appearance. The new product pages introduce visitors to all that Fecon has to offer and the online visitor has immediate access to the Web site’s major topic areas that allow browsing and searching through information about both products and applications. New features on the Web site include an applications section, a translation option and updated news and events sections. For more information, visit www.fecon.com.

a selection of 1.5 to 5 in. (3.8 to 12.7 cm) screens. Screens can be changed in 15 to 20 minutes. The 36 in. (91 cm) wide belt has a standard discharge height of 15 ft. (4.5 m). Weighing less than 38,000 lbs. (17,236 kg), the wheeled Dynamic 5240 offers operators a horizontal grinder that transports easily and is agile enough to fit into almost any job site. Models with track drive also are available for sites with soft soil conditions or unstable terrain. The Dynamic brand product line covers a growing family of chippers, grinders and screening equipment. Dynamic combined with the Puma line of forwarders, harvesters, firewood processors and attachments, represents a versatile range of one-stop “stump to chip” solutions. Under the Dynamic, Puma, and ADC Custom brands, Norco Equipment’s lineup of products serves specialty markets such as forestry, bioenergy, recycling, solid waste, demolition, material handling and agriculture. For more information, call 803/234-5750 or visit www.norcoequipment.com.

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • October 20, 2010 • Page 41

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” TRACTOR & EQUIPMENT CO.

POWER EQUIPMENT COMPANY

www.tractor-equipment.com

Alabaster, AL 205-621-2489 Anniston, AL 256-831-2440 Birmingham, AL 205-591-2131 Decatur, AL 256-355-0305 Dothan, AL 334-678-1832 Grove Hill, AL 251-275-4158 Mobile, AL 251-457-8991

Montgomery, AL 334-288-6580 Shoals Area, AL 256-383-5666 Tuscaloosa, AL 205-752-0621 Panama City, FL 850-763-4654 Pensacola, FL 850-505-0550 Albany, GA 229-435-0982 Atlanta, GA 404-366-0693

Augusta, GA 706-798-7777 Calhoun, GA 706-879-6200 Columbus, GA 706-562-1801 Hoschton, GA 706-654-9850 Kennesaw, GA 678-354-5533 Macon, GA 478-745-6891 Savannah, GA 912-330-7500

www.powerequipco.com Knoxville, TN 865/577-5563 LaVergne, TN 615/213-0900 Chattanooga, TN 423/894-1870 Kingsport, TN 423-349-6111 Memphis, TN 901-346-9800 Saltillo, MS 662-869-0283

ATLANTIC EQUIPMENT & SUPPLY

www.aeandsupply.com Hampton, VA 23661 757/827-4778 800/325-0461

ASC CONSTRUCTION EQUIPMENT USA, INC. www.ascvolvo.com Asheville, NC 828-687-0620 Charlotte, NC 704-596-8283 Greenville, NC 252-754-5280 Raleigh, NC 919-661-8710 Charleston, SC 843-414-1120 Columbia, SC 803-791-0740 Piedmont, SC 864-704-1060

GS EQUIPMENT INC. www.gsequipment.net Tampa, FL 866-586-8956 Fort Lauderdale, FL 954-327-8808 Fort Myers, FL 239-334-6063 Jacksonville, FL 904-268-4400 Orlando, FL 407-859-9160

LYLE MACHINERY

www.lylemachinery.com Jackson, MS 800-898-4000 Fax: 601-939-8440 Gulfport, MS 228-832-7575 Hattiesburg, MS 601-296-7556 Magnolia, MS 601-783-2111

Page 42 â€˘ October 20, 2010 â€˘ www.constructionequipmentguide.com â€˘ Crushing, Screening & Recycling Section â€˘ Construction Equipment Guide

Get ready to break into a new era of jobsite opportunity. Trade in virtually any brand of hydraulic hammer, and arm yourself with the greater productivity of reconditioned and new hydraulic hammers from Okada. We also have a full line of compactors, shears, crushers and grapples â€“ both new and reconditioned models.

/KADA !MERICA )NC s (AMMERS s 4ROMMEL "UCKETS s 3HEARS s #RUSHERS #OMPACTORS s 'RAPPLES s 0LUMBING +ITS s 0ULVERIZERS

Dealer Inquiries Welcome

Come Visit...

Your Screening Headquarters Value for Money Since 1985

www.sandscience.com See our web page for Surplus Eqt/Specials

Affordable Trommels DEALERS WANTED FOR ULTRA

RENTALS Available

(843) 525-6140

Fax: (843) 525-0537

Frontage Rd, exit 33 on SC I-95 (Beaufort Exit)

Vibrating Screens, Conveyors & Feeders

Good Used Equipment Eliminator 6 x 22 Portable Trommel â€˘ Has 2 Fold-Out Belts Satellite Portable Screener (Mulch-Soil) â€˘ Onboard Belts, Nice $29,000 Starscreen Unit 18â€™ Long at 5/16 Sizing â€˘ Fine Screen for Soil-Compost Royer 5 x 12â€™ Vib Screen Reclaimer â€˘ HD Punchplate Screen Various Portable Box Screeners â€˘ Gas and Diesel Various Used/Rental Conveyors â€˘ From $6,500

ASC, Sennebogen Team Up in North, South Carolina ASC from page 35

Stimmel officially signed the new dealer agreement with Sennebogen during its open house on March 11 at its new North American headquarters in Stanley, N.C. He said that attending the event also gave him some insight about Sennebogen, which positively reinforced his decision to partner with the company. â€œI got a very strong sense of dealer support from Sennebogen, and this company truly exemplifies how to be a partner in the business,â€? said Stimmel. â€œThat message came through loud and clear at their 10th Anniversary and Open House, as they showed dealers and customers that we are all in this together. My sense from Constantino Lannes and his team is that they are always doing something to support the dealer so that we, the dealers, can support our customers. This is more like being a business partner to me and I had a really good feeling that they want to go beyond the traditional dealer/supplier relationship,â€? he said. â€œBeing in this business for 36 years has taught me to have certain expectations from suppliers and Sennebogen has exceeded those expectations.â€? For more information, call 704/347-4910 or visit www.sennebogen-na.com.

The

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • October 20, 2010 • Page 43

Construction Equipment Co. 18650 SW Pacific Highway Tualatin, Oregon 97062 ID[ www.ceccrushers.com

The PRODUCT you want.... The PRODUCTION you need.... 102x115 Track Mounted Impactor

6x16 Screen-It

Crushing Screening Washing Conveyors 6x16 Wash Plant

26x42 Track Mounted Jaw Crusher

....At a PRICE you can afford Ring Power Corp. Birmingham, AL 2238 Pinson Valley Parkway Birmingham, AL 35202 205-841-6666 205-849-0853 (fax) Huntsville/Decatur, AL 15101 AL Hwy. 20 Madison, AL 35758 256-536-9390 256-355-5250 (fax)

Mobile, AL 35 Schillinger Road, North Mobile, AL 36601 251-633-4020 251-639-0461 (fax)

Oxford, AL 1501 Highway 78 East Oxford, AL 36203 256-832-5053 256-831-4295 (fax)

Montgomery, AL 3120 Old Hayneville Road Montgomery, AL 36108 334-262-6642 334-834-2272 (fax)

Pensacola, FL 7950 Pittman Avenue Pensacola, FL 32534 850-479-3004 850-474-1602 (fax)

Atlanta, GA 5710 Riverview Road Atlanta, GA 30126 404-696-7210 404-699-1679 (fax)

500 World Commerce Parkway St. Augustine, FL 32092 904-737-7730 904-281-9110 (fax) www.ringpower.com

Pompano 407-466-5509

Lakeland 407-466-5509

Palm Bay 407-466-5509

Brooksville 407-466-5509

Lake City 407-466-5509

Sarasota 407-466-5509

Ocala 407-466-5509

Daytona 407-466-5509

Page 44 • October 20, 2010 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

Morbark Quick Switch Kit Turns Peterson 4300 Drum Chipper Units Into Wood Chippers Features Sloped Feed Deck

Peterson’s new drum chipper model is suited for high volume biomass producers. The 4300 model is powered by a C18 Caterpillar engine available in three power ratings, 630, 700 and 765 hp (470, 522 and 570 kW). The chipper utilizes a 36 in. (91.4 cm) diameter by 40 in. (10.2 cm) wide drum. It will be available with optional material sizing bars and a chip accelerator to minimize oversize twigs and branches in the chips. Other key features include a sloped feed deck for ease of feeding the chipper, and an adaptive feed control to maintain chip quality and engine RPM. Production 4300 drum chippers will be available 2010. For more information, visit www.petersoncorp.com

With the Morbark quick switch conversion kit, it is now possible for Morbark horizontal grinder owners to convert their unit into a wood chipper, which can produce biomass chips by simply modifying the hammermill of their Morbark horizontal grinder. The quick switch conversion kit is a series of components, which convert a grinding hammermill into a smooth skinned drum with full sized chipping knives. The design makes the conversion possible in the field, without a crane, according to the manufacturer. For more information, call 800/831-0042, or visit www.morbark.com.

NDA Survey Reveals Positive Change in Project Opportunities A recent survey of the member companies of the National Demolition Association, a trade organization representing the global demolition industry, revealed that the companies are experiencing a slow improvement in the dynamics of the demolition industry. In answer to the question, “Are you seeing any change in the volume of demolition project opportunities, jobs to bid, in your market?” 41 percent of the respondents said “yes.” Approximately 25 percent said “no,” while 35 percent said they are still not sure. In response to the question “Has the federal government’s stimulus program, $787 billion approved last year, had any effect on the market of demolition services in your area?” a full one-third of the respondents

said “yes,” while 44 percent said “no,” and 20 percent were not sure. “These numbers are no surprise,” said Michael R. Taylor, executive director of the National Demolition Association. ”So much of our work flows from activity in the construction industry and takes a little more time for us to benefit from an upturn in that industry. McGraw-Hill Construction reported that new construction starts in May climbed 3 percent from the previous month and that non-residential building showed improvement in May, as well. We’re optimistic that we’ll steadily feel the improvement as the year progresses.” For more information, visit www.demolitionassociation.com.

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • October 20, 2010 • Page 45

Using a mobile conveyor to stockpile material has many benefits: • Reduced operating costs (fuel and labor) as the loader operator does not need to be continuously moving material from under the conveyor (sometimes the need for a second loader is totally removed) • Greater operating efficiency - less rehandling of product and more focus on feeding the processing plant and loading trucks • Natural stockpile capacity increased • No contamination of product - often caused through re-handling • More environmentally friendly than a loader • Easy to move around work site

There are many reasons why more companies are buying mobile conveyors from Anaconda Conveyors USA: • Exceptional build quality - robust and reliable with features designed with the end user in mind • Excellent value for money - typical payback period of less than 6 months! • Competitively priced against all other conveyor manufacturers • Quick set up time on all products • Extensive range offering conveyors capable of handling up to 880 tons per hour • Dedicated customer support

Page 46 • October 20, 2010 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

Multiple Options...

Hultdins Grapples Offer Choices for Mini-Excavators Hultdins offers a range of multi-use grapples that can be used for handling logs, brush, stone, pipe or other materials. Very popular in the forest industry on forwarders and self loaders, these by-pass type grapples have a wide opening as well as a very small closing dimension. Hultdins grapples are robotically welded from high strength Weldox steel and feature a tapered pin design that ensures pin joints stay tight, according to the manufacturer. All Hultdins grapples are equipped with high load capacity Indexator rotators with continuous rotation. The rotator link can be supplied to be direct pinned to the boom or to suit most quick couplers. For more information, call 519/754-0044 or visit www.hultdins.com. Hultdins grapples can be used for handling logs, brush, stone, pipe or other materials.

Hultdins grapples are robotically welded from Weldox steel.

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • October 20, 2010 • Page 47

ONLY YO U C A N P R E V E N T W I L D FI R E S. www.smokeybear.com

Page 48 • October 20, 2010 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

Keep Up With All the Industry News Subscribe to

Construction Equipment Guide Today! Toll Free

800/523-2200

SPECIAL SALE

GATORBACK TRACKS

877-748-7299

www.gatorbacktracksandequipment.com

AIM Dozer Moldboard Rakes Infrastructure Bank Approach Produce Little Ground Resistance Backed by President Obama AIM dozer moldboard rakes offer AR400 steel tines engineered with a curved design to produce minimum ground resistance. The tines have been welded to a heavy wall steel tube and each AR400 steel tine is reinforced with dual gussets for added stability. Moldboard rakes can be used in land clearing without stripping topsoils, simplifying the removal of roots, limbs, brush, and debris. The pin-on universal design makes the installation and removal of the rake an easy task. AIM moldboard rakes come in several sizes ranging from 96 to 144 in. (244 to 366 cm) for all sizes of machines. For more information, call 800/803-3365 or visit www.aimattachments.com.

BILL from page 24

Calif.), Gov. Edward Rendell (D- Pa.) and Michael Bloomberg, the independent mayor of New York. Completed projects might charge fees, taxes or tolls. “Keep in mind that the federal government provides about 40 percent of highway funding nationwide, the other sources being a match from state and local governments or some combination thereof,” said Solsby. “We’re going to have to dig a deep well to go back to and that will require a lot of sources. Some smaller examples [of the bank] are in place at the state and local level, but nothing has been assembled at this larger federal level. However, to put this into perspective, the total availability of private money for transportation infrastructure would only meet about 15 percent of the total need.” Commented AEM’s Yaksich: “The infra-

AIM dozer moldboard rakes can be used in land clearing without stripping topsoil.

structure bank would be a significant change, taking some of the decision-making away from Congress and putting it into the bankers’ hands. I don’t think Congress is going to be inclined to support that. Ultimately, it’s still deficit spending, collecting some user fees, paying back into the bank, but not paying back as much as you’re taking out.” High Stakes The construction industry has been hardhit by the recession, which ended in June of last year. Unemployment in the industry has averaged 18 percent. Recovery has been slow. In 2009, the construction equipment industry had lost 40 percent of its workforce from 2006 levels. A new well funded highway and surface transportation bill will be a positive step forward.

Wo u l d y o u l i k e y o u r c o m p a n y f e a t u re d i n C o n s t ru c t i o n E q u i p m e n t G u i d e? If so, please contact us at:

editorial@cegltd.com

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • October 20, 2010 • Page 49

Kawasaki Seeks Entries for ‘Loader Legend Contest’

KCMA Corporation, formerly known as Kawasaki Construction Machinery Corp. of America, is conducting a “Loader Legend Contest.” The contest was announced Sept. 1 and will run through Jan. 15, 2011. Kawasaki is looking for older, operational Kawasaki wheel loaders that have become a legend in their own right. What makes a Kawasaki loader a Legend? The performance, the challenging environment, its age, number of hours, or extraordinary application. Perhaps the loader participated in a historic event. Every loader has a story, and Kawasaki is interested in hearing all about it. Based on the submitted entries Kawasaki will select five of the most legendary stories as semi-finalists. Each storyteller, and wheel loader owner, will win $100 gift cards for the Kawasaki online store. Each of the semi-finalists will be interviewed for the Loader Legends issue of FOCUS Magazine, and from them a winner will be determined. The owner, and the storyteller of the most legendary Kawasaki wheel loader, will each win $1,000. For more information, visit www.kawasakiloaders.com/LoaderLegendsContest.

Can’t Find Parts?

We have 100’s of Dismantled Machines in the Yard

SOUTHERN TRACTOR SERVICE AND SALVAGE Toll Free: 877-672-5824 or: 863-419-0191 search new & used parts www.findtractorparts.com

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

Page 50 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

N Series Cab Upgrades Enhance Operator Efficiency, Comfort

The Case 580 Super N backhoe demonstrates its lifting capabilities at the product review center in Tomahawk, Wis.

Case offers a range of attachments for the N Series loader/backhoes, including hydraulic hammers, augers and other devices. CASE from page 18

windows provide easy communication to the back of the machine and improve cross-ventilation comfort. A new side lighting package helps illuminate the entire perimeter of the N Series machine, greatly enhancing operator and job site safety, and boosting productivity. The new lighting package improves performance by 28 percent, providing enhanced visibility and overlapping field coverage, according to the manufacturer. The new, “easy flex” side lights offer 45 degree rotation to deliver extra lighting where it’s needed most. “The new N Series machines light up the entire perimeter of the machine,” said Marringa. “This means the entire sideto-side range of backhoe movement — and beyond — is illuminated. This not only gives the operator a better sense of control; it also boosts productivity at any time of day or night.” As in previous models, the N Series backhoes include comfortable, adjustable operator seats and ergonomically placed controls along with all-season heating and air conditioning systems for increased operator comfort. The N Series cabs also are quiet — at 72 decibels — providing an environment in which the operator can concentrate on the task at hand. Attachments Add Value Case also offers a range of attachments for the N Series backhoes, including hydraulic hammers, brooms, forks, augers and rakes. Case leads the industry in providing the only cab-activated hydraulic backhoe quick-coupler, handheld hydraulics and loader quick-coupler options. For more information, visit www.casece.com.

Side lighting on the new N Series loader/backhoes boosts safety and productivity in low-light conditions. Exterior lighting on the N Series machines includes two 55W halogen front driving lights, along with three sets of two adjustable 55W halogen work lights on the left side, right side and backhoe side of the cab canopy.

Case N Series Extends Backhoe Legacy LEGACY from page 18

economy, lower emissions, simpler design and advances such as automatic belt-tensioning. • Case L Series 2 loader/backhoes introduced in the late 1990s included such improvements as ride control for vastly improved load retention and roading of the machines, and a hydraulic quick coupler for the loader bucket that enabled the operator to engage and disengage attachments without leaving the seat. • Case M Series loader/backhoes, introduced in the past decade, featured a completely redesigned cab for enhanced operator comfort, safety and efficiency. Another M Series advancement was the backhoe pro control system, which combined antirebound swing with improvements in boom and dipper control. This translated into faster, more accurate trenching with greater operator comfort.

And Your Hitachi Dealers

Virginia Division Ashland, VA 804/798-6001 Chester, VA 804/748-9324 Burkeville, VA 434/767-5578 Salem, VA 540/380-2011 Fishersville, VA 540/337-3057 Winchester, VA 540/667-9777 Manassas Park, VA 703/631-8500 Danville, VA 434/822-6110 Fredericksburg, VA 540/898-8933

Carolinas’ Division Charlotte, NC 704/597-0211 Greensboro, NC 336/668-2762 Wilkesboro, NC 336/973-8201 Mt. Gilead, NC 910/439-5653 Rock Hill, SC 803/325-1555 Hickory, NC 828/322-4300 Asheboro, NC 336/625-2212 Matthews, NC 704/821-7399 Salisbury, NC 704/636-2671 Asheville, NC 828/667-0176

1206 Blaylock St. P.O. Box 3329 Albany, GA 31706 229/888-1212 Cuthbert, GA 229/732-2631 Atlanta, GA 30336 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Braselton, GA 770/965-1889 Macon, GA 478/788-1586

Adairsville, GA 770/773-9857 Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 51

Your wish is its command. Think it, then do it, with the precise hydraulics of a new Zaxis Dash-3 Excavator. Low-effort, short-throw pilot levers, balanced engine performance and hydraulic flow, best-in-class metering, and smooth multifunction operation make good operators great, and great ones unbelievable. These utility-sized Dash-3s also deliver increased swing torque, faster arm roll-in, and faster boom lower/arm movement for faster cycle times. Bonus. Tired of jerky, wandering controls that have a mind of their own? Make a smooth move to new Hitachi Dash-3 Excavators. www.hitachiconstruction.com

6870 Phillips Hwy. Jacksonville, FL 32245 904/296-5000 Lake City, FL 386/752-9544

Palatka, FL 386/325-6268 Savannah, GA 912/964-7370 Brunswick, GA 912/264-6161

Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420

Raleigh, NC 919/772-2121 Greenville, NC 252/758-4403

New Bern, NC 252/638-5838 Fayetteville, NC 910/424-1200 Wilmington, NC 910/675-9211 Ahoskie, NC 252/332-5550

Page 52 â€˘ October 20, 2010 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

CASE AUTHORIZED DEALERS

# 35 !&'+#/5 / !1,/ , Albertville (256) 878-1631

/ '+ / !1,/ .2'-*#+1 Columbia (601) 736-4527

2+103'))# / !1,/ .2'-*#+1 Huntsville (256) 837-6767

/1'+ /2!( / !1,/ ,*- +5 Columbus (662) 328-5341

,# ,+#5 !&'+#/5 Birmingham (205) 841-7000

'" ,21& !&'+#/5 Gulfport (601) 867-1555 Jackson (601) 948-6740

)* / !1,/ .2'-*#+1 Alma (479) 632-6300

'" ,21& %/'!2)12/ ) .2'-*#+1 Byhalia (866) 492-1075

)16 .2'-*#+1 ,*- +5 Jonesboro (870) 972-5522

4'+ '15 / !1,/ .2'-*#+1 Alexander (501) 847-3310 Russellville (501) 834-9999 Sherwood (501) 834-9999 #+12/# .2'-*#+1 Searcy (501) 268-4206 '))' *0 / !1,/ Fayetteville (479) 442-8284

-'1 ) ,+01/2!1',+ .2'-*#+1 Tallahassee (850) 575-8655

/,4#/0 .2'-*#+1 ,*- +5 Davie (954) 916-1020 West Palm Beach (561) 965-0100 '+%)'+# .2'-*#+1 Cantonment (850) 937-9693

1) +1'! , 01 ) .2'-*#+1 Richmond Hill (912) 459-1155 , ,2+15 / !1,/ ,*- +5 Marietta (770) 427-1348 0&3'))# / !1,/ Nashville (229) 686-2071 Valdosta (229) 242-9900 '#"*,+1 / !1,/ +" .2'-*#+1 Gainesville (770) 534-5000 "# / !1,/ .2'-*#+1 Griffin (770) 227-2011

Go to www.newholland.com/snowcentral for details or contact your local dealer.

LEASE AN L185 FOR

799

/##+0 ,/, / !1,/ Greensboro (336) 273-3606

PER MONTH OCTOBER 2010 THROUGH MAY

& /),11# / !1,/ ,*- +5 Charlotte (704) 596-8900

AND

PER MONTH DURING THE SUMMER SEASON Advertised Lease (June through September)

'+#0 .2'-*#+1 ,*- +5 Rocky Mount (252) 446-0333 #+1#/ / !1,/ ,*- +5 Raleigh (919) 779-0922 '+01,+ / !1,/ ,*- +5 Winston-Salem (336) 744-7000

)1* + / !1,/ .2'-*#+1 Conway (843) 347-4664 Florence (843) 662-0151 '/7#)" / !1,/ ,*- +5 Columbia (803) 799-6001

/##+3'))# / !1,/ ,*- +5 Greenville (864) 232-2463

& 11 +,,% / !1,/ .2'-*#+1 Chattanooga (423) 892-5725 0&3'))# / !1,/ +" .2'-*#+1 Nashville (615) 865-7800

ADD A 96â€? HEAVY-DUTY SNOW BUCKET

#01 '))0 / !1,/ Jonesborough (423) 753-4621

$71 PER MONTH

)" ,*'+',+ / !1,/ .2'-*#+1 Richmond (804) 329-5387 2""#/ / !1,/ ,*- +5 Danville (434) 792-0515

#)) ,+ +! Lake Charles (337) 433-1434 Welsh (337) 734-2222

1 $$,/" Cloverdale

& 23'+ /,0 ,+01/2!1',+ .2'- Belle Chasse (504) 394-1095

1#3#+0,+ / !1,/ Chesapeake (757) 420-4220

(540) 992-4650

REAP THE TAX BENEFITS Make your purchase by December 31, 2010!â€ www.depreciationbonus.org

ADD A 72â€? SNOW BLOWER (STANDARD FLOW)

$204 PER MONTH

" ! ! ! LOCATE A DEALER NEAR YOU AT WWW.NEWHOLLAND.COM OR CALL 1-888-365-6423 TOLL FREE.

â€ CNH Capital and New Holland Construction dealerships do not provide tax, legal or accounting advice. Customers are strongly encouraged to seek their own professional advice on the proper treatment of these transactions. *For commercial use only. Customer participation subject to credit qualification and approval by CNH Capital America LLC. See your New Holland Construction Dealer for details and eligibility requirements. Payment based on a 31-month lease of a New Holland L185 skid steer with skip payments, 400 hours/year, year-round. $4,647 U.S. due at closing which includes a $1,000 security deposit. This offer does not reflect actual sales price. Offer good through December 31, 2010. Not all customers or applicants may qualify for this rate or term. CNH Capital America LLC standard terms and conditions will apply. Taxes, freight, set-up, delivery, additional options or attachments not included in payment example above. Offer subject to change or cancellation. ÂŠ 2010 CNH America LLC. All rights reserved. CNH Capital is a registered trademark of CNH America LLC. New Holland is a trademark of CNH America LLC.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 53

RELY On Expertise Air Compressors Generators Light Towers Light Compaction

AIR COMPRESSOR SALES 5490 Thomaston Road Macon, GA 31220 (478) 474-8460

ASC

CONSTRUCTION EQUIPMENT

BLANCHARD MACHINERY, INC.

COWIN EQUIPMENT

NORTH CAROLINA 11425 Reames Rd Charlotte (704) 596-8283 Asheville (828) 687-0620 Raleigh (919) 661-8710 Greenville (252) 754-5280 SOUTH CAROLINA Columbia (803) 791-0740 Piedmont (864) 704-1060 North Charleston (843) 414-1120

www.blanchardmachinery.net 14301 NE 19th Avenue Miami, FL 33181 (305) 949-2581 Fax: (305) 949-0747 Miami, FL (305) 232-2255 West Palm Beach, FL (561) 833-4634

2238 Pinson Valley Parkway Birmingham, AL 35217 (205) 841-6666 Mobile, AL (251) 633-4020 Montgomery, AL (334) 262-6642 Huntsville, AL (256) 350-0006 Pensacola, FL (850) 479-3004 Oxford, AL (256) 832-5053 Atlanta, GA (404) 696-7210

PINNACLE CENTRAL COMPANY, INC. www.pinnaclecentral.com 103 Bryan Street Jacksonville, FL 32202 (904) 354-5746 Polk City, FL (888) 253-2444

Page 54 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu Launches PC228USLC-8 Hydraulic Excavator Komatsu’s PC228USLC-8 hydraulic excavator, with an operating weight of 53,195 to 54,405 lbs. (24,129 to 24,677 kg), is powered by a Komatsu SAA6D107E-1 engine. The electronically controlled HPCR (High Pressure Common Rail) fuel injection system is EPA Tier III emissions certified, provides low noise operation, and remains fuel efficient while delivering power and productivity. The PC228USLC-8 is equipped with KOMTRAX technology, which sends machine operating information to a secure Web site utilizing wireless technology. Data such as operating hours, machine location, maintenance notifications, out of area notifications, machine utilization, and residual fuel levels are just a few of the features that are relayed to the web application for analysis. The KOMTRAX fleet monitoring system monitors machine availability, reduces the risk of machine theft and provides a wealth of other information to drive business efficiency. Special features of the new PC228USLC-8 include: • Short Tail Swing Radius and Round Cab Design The PC228USLC-8 tail is more compact than a conventional excavator, which allows the machine to work in confined areas for road, bridge, and urban applications. The boom foot position and raising angle is higher than on the PC200LC-8, giving the machine a shorter swing radius for the work equipment. The round cab design allows the cab to swing within the same turning radius as the counterweight, further enhancing the versatility of this model in tight working conditions. • Increased Lift Capacity and Stability The PC228USLC-8 features 2,865 lbs. (1,300 kg) of additional counterweight. With this additional counterweight mass, the lift capacity over the front and side of the machine is increased providing higher machine performance when heavy lifting is required. • Hydraulic System Enhancements Using a Closed Center Load Sensing (CLSS) system, the hydraulic system of the PC228USLC-8 has been enhanced

Komatsu’s PC228USLC-8 hydraulic excavator is powered by a Komatsu SAA6D107E-1 engine.

to increase efficiency, lower hydraulic loss, and lower fuel consumption. The excavator features “variable speed matching,” a highly efficient matching technique that optimizes the performance of both the engine and hydraulic systems, giving the operator power on demand when needed. Increasing the piping size on the bucket circuit and adding a new quick return valve have also reduced hydraulic loss. These hydraulic system enhancements have increased speed and productivity, yet reduced fuel consumption. • New Large Multi-Color Monitor The easy-to-view 7 in. LCD monitor enables accurate smooth work and displays data in 12 languages for global support. There are five modes of operation that may be selected through the monitor panel: power mode, economy mode, lifting mode, breaker mode and attachment mode. The monitor panel also displays the automatic air conditioner, machine mainte-

nance tracking, and the image from the standard, counterweightmounted rearview camera system. • Enhanced Operating Efficiency Through Ease of Maintenance and Serviceability In order to reduce costly downtime, the PC228USLC-8 provides access for ease of service and maintenance. The radiator, hydraulic oil cooler, and charge air cooler are mounted side by side, making it simple to maintain and service these components when required. The machine is equipped with the Komatsu EMMS (equipment management monitoring system), which performs three main functions that are displayed on the large LCD color monitor. EMMS continually monitors all critical excavator systems, alerting and guiding the operator should an abnormality occur, which can help keep a small problem from becoming a major service issue, thereby contributing to reduced-operation costs. EMMS also tracks the preventative main-

tenance schedule, provides onboard tracking, and advises current required maintenance. In addition, the system provides error codes and troubleshooting assistance to mechanics in order to minimize diagnosis and repair time. • Built for Durability and Reliability All major components on the new PC228USLC-8 including the engine, hydraulic pumps, motors, and control valves are exclusively designed and produced by Komatsu. The boom and arms exhibit long-term durability and are highly resistant to bending and torsional stress due to large crosssectional structures, high tensile strength steel, interior partition walls, and large one-piece castings. Electronic components such as controllers, connectors, sensors, and wiring have undergone extensive testing to ensure reliability in harsh conditions. The electronic connectors are DT-type and seal against dirt and moisture. For additional reliability, metal guard rings

protect all hydraulic cylinders. Hydraulic hoses are equipped with O-ring seals versus conventional taper seals to help prevent leaks. Long replacement intervals for hydraulic oil, engine oil, and filters keep the machine up and running for increased hours on the job. • Versatility to Match Different Job Applications The PC228USLC-8 is equipped with five working modes and Power Max control. These modes are designed to match engine speed, pump flow, and system pressure to specific application requirements, providing the operator with the flexibility to match equipment performance to the job at hand. Since many excavators operate a wide variety of working attachments, the PC228USLC-8 is equipped with breaker mode (single action circuit) and attachment mode (double action circuit), allowing the operator to adjust hydraulic flow directly from the cab through the large monitor panel. The attachment flow control has been improved and is more flexible for effortless attachment adjustments. In hard digging applications, a one-touch Power Max Function increases digging force by 8 percent for 8.5 seconds, creating a noticeable difference in digging performance. • Cab Enhancements Provide Comfortable Working Environment A wide spacious cab with a high back operator seat provides support and comfort for reduced fatigue and higher productivity. The highly pressurized cab minimizes the amount of dust that enters the operator’s compartment, while its rigid frame offers wide visibility and has excellent sound absorption. The multi-layer viscous cab mounting system incorporates longer stroke and the addition of a spring. Combined with a high rigidity deck, the new cab damper mounting reduces noise and vibration levels at the operator seat. A high capacity automatic heater/defroster/air conditioning system is incorporated into the new monitor panel and is provided as standard equipment. For more information, visit www.komatsuamerica.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 55

CASE AUTHORIZED DEALERS

ALABAMA

Cowin Equipment Company Got enough power to get the job done? Anything less than an L Series Crawler Dozer is a complete pushover. We combined high horsepower, best-in-class maximum drawbar pull, and a hefty operating weight to level the entire playing field. And when it comes to blade angle force and ease of serviceability, you’ll find other dozers sleeping on the job. Get to your Case dealer, climb in the cab and start pushing your way to productivity.

Birmingham Madison Montgomery Oxford

(205) 841-6666 (256) 350-0006 (334) 262-6642 (256) 832-5053

Broussard Sulphur

Baton Rouge St. Rose

Scott Equipment Company

Houma*

Harrison

(870) 741-8900

(479) 648-1600 (501) 455-5955 (479) 751-4242 (870) 772-0204

Jonesboro

(870) 932-8383

Bonita Springs Hialeah Gardens Tampa West Palm Beach

Augusta Decatur Pooler

(239) 949-0100 (305) 821-2273 (813) 621-5811 (561) 296-9710

Alexandria Monroe Shreveport

(504) 467-6794 (985) 876-2280 (318) 448-1647 (318) 387-4160 (318) 226-9696

MISSISSIPPI Hood Equipment Batesville*

(662) 686-2361 (662) 563-4546

Lee Tractor Company, Inc. Biloxi

(228) 392-9922

Stringer’s International Clarksdale* (706) 737-9191 (770) 322-6960 (912) 748-2828

Central Georgia Equipment Byron

Scott Equipment

Leland*

GEORGIA

Border Equipment

M & L Industries

(225) 357-7515

Ayres Delta Implement

FLORIDA

Trekker Tractor

(337) 837-6694 (337) 625-5942

Crawler Supply Company, Inc.

Potter Equipment Company

Town and Country International

(478) 956-3833

(662) 624-4305

Tubb Equipment & Rental Hattiesburg Jackson

(601) 268-1010 (601) 932-3900

TENNESSEE

Contractors Machinery Inc.

Haney Farm & Ranch

Johnson City Louisville

Vaughters Tractor Co.

Diamond Equipment

Wallace Truck & Equipment

Liles Brothers

Rockmart*

Gainesville Valdosta

(770) 684-7277 (770) 536-1455 (229) 219-7641

VIRGINIA

Lawrence Equipment Ashland Cloverdale Waynesboro

(804) 752-8333 (540) 966-0151 (540) 942-2610

Vernon E. Stup Company Clear Brook

(540) 662-8266

U.S. ECONOMIC INCENTIV

Maximize your Depreciation EXTENDED! Deduction. Consult your tax advisor reg arding the NEW $500,000 Section 17 9 expens first-year 50% bonus deprec ing and iation. Make your purchase by De cember 31, 2010!† www.depreciationbonus.o rg

www.casece.com • 866-54CASE6 CNH Capital and Case dealerships do not provide tax, legal or accounting advice. Customers are strongly encouraged to seek their own professional advice on the proper treatment of these transactions. *These dealers carry only the 650L model. ©2010 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC.

†

CLM Equipment Company, Inc.

Lee Tractor Co. Inc.

ARKANSAS Fort Smith Mabelvale Springdale Texarkana

REAP THE TAX BENEFITS

LOUISIANA

La Vergne Jackson

(423) 975-9111 (865) 982-6452

(615) 641-1100

(731) 423-1637

Page 56 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

COWIN EQUIPMENT COMPANY, INC.

Birmingham, AL 205/841-6666 • 800/239-2694 Fax: 205/849-0853 Mobile, AL 251/633-4020 • 800/223-6755 Fax: 251/639-0461 Madison, AL 256/350-0006

INTERSTATE EQUIPMENT CO. www.interstateco.com

P.O. Box 868 Statesville, NC 704/873-9048

West Columbia, SC

803/794-7400 Raleigh, NC 919/467-1801

October 20, 2010 – DBE Requirements Meeting. Understanding DBE Requirements Meeting by AGC of Minnesota. Do you find federal and state DBE requirements confusing? Have you lost a project, or been fined, for failing to comply? On this date, anyone who has responsibility for DBE compliance is invited to attend a FREE lunch and learn presentation. Contact AGC of Minnesota, telephone 651-632-8929 or 800552-7670; fax: 651-62-8928; email: info@agcmn.org. October 21, 2010 – Training. AGC’s Construction Leadership Council (CLC) will sponsor a presentation by Matt Norman of Dale Carnegie Training. It’s All About Relationships! How are your networking skills? Everyone needs a little fine tuning for maximum results! Please call Jane Sanem at 651-796-2187 or jsanem@agcmn.org for questions. October 25-26, 2010 – Construction Conferences. Associated Owners & Developers 2010 National Conferences. AOD’s 14th Annual Industry Conference, a 1-1/2 Day Program featuring leading experts who will focus on today’s construction market strategies for continued success, where our industry is headed, and how best to get there in the years to come. September Conference to be held at the W. Atlanta Midtown Hotel, Atlanta, GA and October Conference at LePavilion Hotel, New Orleans, LA. For further information, please go to www.constructionchannel.net under “Mark Your Calendar.” Also, contact Andrew at Associated Owners & Developers (AOD) Telephone: (703) 734-2397. October 26-28 and November 2-4, 2010 – Safety Training. AGC of Minnesota will host OSHA 10 Hour and 30 Hour Safety Training Courses. Please contact Dan Hannan at 651-796-2192 or dhannan@agcmn.org for more information. *AGC St. Louis, Glow Ball Golf Tournament a Huge Success! This past Construction Leadership Council’s Glow Ball Tournament event was a sellout and complete success. The tournament raised over $1,700 to benefit the foundation. Thanks to Stephanie Neff, chair of the golf committee, and thanks to her assistants! *St. Louis Blues Club Seats Available! It’s time to catch Blues action! Single games sales are available for this year’s St. Louis Blues Hockey games. The AGC of St. Louis purchased 10 premium games (4 tickets per game) for the 2010-2011 Blues season. Seats are located behind the goal and in the middle section. This perfect view of the ice is ideal for watching plays unfold. If you are interested in purchasing a game(s), please contact Donna Pigg at 314-781-2356, ext. 108 or by email at dpigg@agcstl.org. Mining New Members. Everyone knows word-of-mouth advertising from satisfied customers brings more business to your company. As an

B C usiness

alendar

IAAP member, you have experienced valuable benefits from membership in this Association and along the way maybe you have talked with others in the industry about joining the IAAP. Your efforts are now being rewarded through a new member recruitment program called “Mining New Members.” For more information, please contact IAAP Outreach Manager Shawn McKinney at (217) 241-1639 or shawn@hansoninfosys.com. DONATION - HELP Support IAAP’s Political Activities – The IAAP Political Action Committee (PAC) was created in order to provide financial support for our allies in the Illinois General Assembly. Whether from Chicago or Downstate Illinois, Democrat or Republican, these legislators all have one thing in common – they support bills that help the Illinois aggregates industry and oppose bills that hurt our interests. As the cost of political campaigns continues to rise, we want to ensure that legislators who support this industry can compete and continue to do good work. For that reason, supporting the IAAP PAC is critically important to the future of our industry, your company, and your Association’s political activities. Please consider sending a donation, payable to the IAAP, to: John Henriksen, Secretary/Treasurer, IAAP PAC, 1115 S. 2nd Street, Springfield, Illinois 62704. INFORMATION - AGC of St. Louis Governmental Affairs Legislative Update: Legislative Alert – New Illinois Law Could have Significant Effect on Contractors. The AGC of St. Louis has become aware of a new Illinois law passed that could have a dramatic effect on our members who perform work in Illinois. On June 16, Illinois Governor Pat Quinn signed House Bill 6349 into law which enhances the Illinois Workers on Public Works Act. From: AGC of St. Louis Governmental Affairs (mail to: agccom@agcstl.org). INFORMATION - The Transportation for Illinois Coalition (TFIC) has published and electronic version of it’s most recent white paper, an analysis of the 2009 capital program. To download a copy of this document, go to the TFIC website: http://www.tficillinois.org, click on publications and open the file entitled Capital Funding for Transportation. Questions? Please feel free to contact John Henriksen, Illinois Association of Aggregate Producers, 1115 South 2nd Street, Springfield, IL 62704. Office: (217) 241-1639. Cell: (217) 899-7389. Fax: (217) 241-1641. AGC Volunteer Appreciation - The AGC of St. Louis is grateful for the many members who serve on committees. The time devoted by these individuals and the knowledge they share with the industry in very important to

Montgomery, AL 334/262-6642 • 800/239-6642 Fax: 334/834-2272 Huntsville, AL 256/536-9390 • 800/239-7368 Fax: 256/355-5250 Oxford, AL 256/832-5053 • 800/917-7931 Fax: 256/831-4295

Pensacola, FL 850/479-3004 • 800/239-4736 Fax: 850/474-1602 Atlanta, GA 404/696-7210 • 800/849-3540 Fax: 404/699-1250

STAFFORD

www.staffordequipment.com

Charlotte, NC 704/333-0786 • 800/687-1672 Raleigh, NC 919/657-0070 • 800/687-1672 West Columbia, SC 803/796-4060 • 800/687-1672 Valdosta, GA 2 2 9 / 2 4 7 - 4 4 95 • 8 0 0 / 2 8 3 - 2 5 7 6

Tifton, GA 229/382-4400 • 800/255-4401 Douglas, GA 912/384-4400 • 800/559-4019 Ashland, VA 8 0 4 / 7 9 8 - 4 5 0 0 • 8 8 8 / 2 8 5 - 62 0 0 Roanoke, VA 540/992-4650 • 800/992-4650

the success of the AGC. November 1 thru 5, 2010 – Build St. Louis Week. In recognition of the AGC of St. Louis members’ hard work and dedication to continue growth in our metropolitan area, we invite you to show your industry support. We hope that you and your company’s employees participation in Build St. Louis Week by conveying the “WE BUILD ST. LOUIS” message. November 4, 2010 – Economist Meeting. How Will Your Company Fare in 2011? McGraw-Hill’s Chief Economist, Cliff Brewis, will guide us through our regional market. What’s in store for 2010 and 2011? Join Cliff and your industry counterparts as we learn more, and make decisions for our future! Contact AGC of Minnesota, telephone 651-6328929 or 800-552-7670, for more information. November 16, 2010 – Seminar. IAAP Member, prepare yourself for the next MSHA Inspection at the President Abraham Lincoln Hotel & Conference Center 701 East Adams, Springfield, Illinois. One of the top mine safety and health attorneys in America will bring you into a discussion covering what mine operators can and should do before, during and after MSHA inspections to protect themselves from liability and avoid costly citations. The seminar begins at 8 AM with a continental breakfast. The evening of Monday, November 15th, the IAAP will host a welcoming reception for participants beginning at 6 PM in the hotel. You may contact John Henriksen, Executive Director, Illinois Association of Aggregate Producers: office, 217-241-1639; cell, 217-899-7389, fax, 217-2411641, email, iaap@hansoninfosys.com.

***SAVE THE DATE: Thursday, December 2nd, 2010 BUILD ST. LOUIS EXPO January 12-16, 2011 – Convention. Early Reservations Now Being Accepted for the Riviera Maya this January, 2011. Network with Decision Makers and Build Your Business! ASA Chicago wants you to join us for the Annual Convention in the Riviera Maya on January 12 to 16, 2011. You’ll stay at the El Dorado Royale, an adults-only destination that provides the ultimate in service in the ultimate setting and is a Conde Nast Traveler Readers’ Top 100 Hotels in the World and a AAA Four Diamond Resort. Contact ASA Chicago, 2200 E. Devon Avenue, Suite 261, Des Plaines, IL 60018 at 847-827-8336 or email info@asachicago.org.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 57

Dozier Crane Pooler, GA 31322 912-748-2684 Fax: 912-748-5361

M.D. Moody & Sons Jacksonville, FL 32207 904-737-4401 Fax: 904-636-0532

Stafford www.staffordequipment.com Ashland, VA 23005 804-798-4500 • 888-285-6200 Roanoke, VA 24077 540-992-4650 • 800-992-4650 Charlotte, NC 28206 704-333-0786 • 800-687-1672 Raleigh, NC 27607 919-657-0070 • 800-687-1672 West Columbia, SC 29169 803-796-4060 • 800-687-1672 Atlanta, GA 30045 770-822-9050 • 866-358-3299 Valdosta, GA 31602 229-247-4495 • 800-283-2576

Tough and rugged, the Terex® RT 130 is the crane of choice for the most demanding rough terrain applications. Other Terex® Cranes Products: Telescopic Truck Cranes Boom Trucks All Terrain Cranes Crawler Cranes

Tifton, GA 31793 229-382-4400 • 800-255-4401 Douglas, GA 31533 912-384-4400 • 800-559-4019 Mobile, AL 36582 251-338-8909 • 800-687-1672

Lattice Boom Truck Cranes Tower Cranes Rough Terrain Cranes

Terex Cranes Waverly Waverly, IA Tel 319 352 3920 • Fax 319-352-5727 www.terex-cranes.com inquire@terexwaverly.com © 2008 Terex Corporation • Terex is a registered trademark of Terex Corporation in the United States of America and many other countries.

For Your Local Terex Dealer, Please Contact: Waverly Operations 106 12th Street S.E. Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: inquire@terexwaverly.com web: http://www.terex-cranes.com

Page 58 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Minnich’s Dust Collection System Benefits Operator, Environment Minnich Manufacturing, a manufacturer of dowel pin drills, concrete paving vibrators and vibrating monitoring systems recently submitted its dust collection system for testing by the National Institute for Occupational Safety and Health, (NIOSH), the testing division of OSHA. The dust collection system is designed to work with any Minnich’s dowel pin drills to greatly reduce the operators exposure to concrete dust in the air. When used in conjunction with the company’s wireless remote control system it further reduces the operators exposure to harmful silica dust. According to Minnich Sales Representative Todd Jurjevic, when NIOSH approached them, the company welcomed the opportunity to be the first and only manufacturer of this type of equipment to be tested. Jurjevic said they were pleased to make available a solution to a job-site problem with a product backed by government testing. Along with their line of concrete paving vibrators and vibrator monitoring systems, Minnich began building dowel pin drill units in 1985. The units, available in both single and multi-gang units, are powered pneumatically or hydraulically and can be manual, self-propelled or mounted on backhoes, skid steer loaders and various other pieces of equipment. The drilling process for the units creates silica dust that can be harmful to breathe and may create visibility concerns in high traffic areas. Simple solutions, such as water kits designed to suppress the dust with water spray, creates a slurry that becomes a collection hazard and also is hard on drill units. Minnich’s dust collection system is comprised of a vacuum that hooks into the side of the drill rod guide, collecting dust before it escapes into the air, and depositing it into a five-gallon pail. Minnich elected to use the pails because they are not subject to tearing like plastic bags and because the readily available pails can be handled and transported by one person. In addition, pails are easy to seal for proper disposal. In addition to its dust collection unit, Minnich also introduced a remote control system in January of 2009. The remote control unit offers further protection from exposure to the harmful silica dust. The dust collection system was initially tested by NIOSH in July 2008 at Minnich’s Manufacturing facility. The evaluation was conducted over several days to determine and document the system’s effectiveness at reducing dust emissions generated by a dowel pin drilling machine. After the testing NIOSH reported that when compared to drilling concrete without a system, the Minnich dust collection system reduced respirable dust concentrations by 89 percent.

To test the dust collection system, a Minnich A-5SCW dowel pin drill equipped with the dust collection system is placed in a tent with air quality monitors set up at various intervals around the machine.

NIOSH returned to Minnich for testing in June of this year. This new round of testing was set up to help the organization establish standardized testing procedures that take into account operator exposure based on proximity to the work area. During the testing, the Minnich dowel pin drill equipped with the dust collection unit was set up in a tent with air quality monitors positioned where the operator would be. Tests also were conducted on the amount of suction at the drilling surface and at the collection receptacle to determine the amount of suction loss. Additional testing at an actual job site is also being pursued by the agency. The results of the testing, originally expected to be available in late August, have been delayed due demands on NIOSH regarding he Gulf oil spill. Jurjevic explained that Minnich initially offered the dust collection systems when a customer requested it, however, now it includes it, as an option, on every one of its

proposals so the customer understands there is a system available for the unit. The system can be retrofitted to any Minnich dowel pin drill unit and can be fitted to competitive units as well. According to Jurjevic, approximately 80 percent of Minnich’s larger units are sold with remote controls and 50 percent of the big units are fitted with their dust collection system. Those numbers are likely to increase as local and federal standards regulating safety and emissions are tightened. According to Tom Held of Fabick CAT, Minnich dowel pin drills equipped with the dust collection system have been well received by its customers. Held noted that one company put the system on an I-70 road project to protect their workers, but found an added benefit was the system eliminated the clouds of dust that can pose a traffic hazard. Another customer working on a runway contract uses the system to meet the airport’s strict dust requirements. Held said the system is easy to maintain and Minnich is a very good company to

NIOSH’s Ken Mead (L) and Alan Echt check the air quality monitors during the dust control system testing.

work with. Fabick CAT has been doing business with Minnich Manufacturing since 1984 and they’ve found that they are always very accommodating in customizing the systems to meet the needs of Fabick CAT’s customers. Held went on to say that Minnich is good at listening to their needs and is always quick to respond. Held also explained that although Fabick CAT has two Minnich rigs that they rent, one has the dust collection system and the other doesn’t. Their customers definitely prefer the machine with the dust collection system.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 59

Faster cycles. Higher productivity Don’t be fooled by imitators. Thirty-plus years’ experience building the best hydrostatic dozers makes John Deere the brand for you. Innovations, like Total Machine Control (TMC), allow operators to customize machine response and operation to their personal preferences. J-Series Dozers deliver unsurpassed productivity and uptime, along with the lowest possible daily operating costs. And that’ just for starters. To learn all about John Deere J-Series Dozers, give us a call.

FLINT EQUIPMENT COMPANY Albany, GA Troy, AL 229/888-1212 334/566-4181 Perry, FL Atlanta, GA 850/584-9200 404/691-9445 Tallahassee, FL Braselton, GA 850/575-5600 770/965-1889 West Columbia, SC Adairsville, GA 770/773-9857 803/794-9340 Aynor, SC Dothan, AL 334/794-8691 843/358-5688 Simpsonville, SC Columbus, GA 864/963-5835 706/687-3344 Grovetown, GA Macon, GA 706/855-5440 478/788-1586

R.W. MOORE EQUIP. CO. Main Office Garner, NC 919/772-2121 Ahoskie, NC 252/332-5550 Hope Mills, NC 910/424-1200 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Castle Hayne, NC 910/675-9211

JAMES RIVER EQUIPMENT INC. Ashland, VA 804/798-6001 Manassas Park, VA 703/631-8500 Winchester, VA 540/667-9777 Charlotte, NC 704/597-0211 800/532-6797 Greensboro, NC 336/668-2762 800/632-0376 Salem, VA 540/380-2011 Asheville, NC 828/667-0176 Mt. Gilead, NC 910/439-5653

INDUSTRIAL TRACTOR CO. Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Brunswick, GA 912/264-6161 Ladson, SC 843/572-0400 Savannah, GA 912/964-7370 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420

Page 60 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RISH EQUIPMENT COMPANY www.rish.com Bluefield, WV • 304/327-5124 Chesapeake, VA • 757/485-2100 Chester, VA • 804/748-6411 Coeburn, VA • 276/395-6901 Opal, VA • 540/439-0668 Salem, VA • 540/380-2090 Staunton, VA • 540/887-8291 POWER EQUIPMENT www.powerequipco.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283 LINDER INDUSTRIAL MACHINERY www.linderco.com Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570

100%

North Carolina Asheville • 828/681-5172 Charlotte • 704/376-7554 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031

South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/552-0095

(the LOGICAL CHOICE for your next excavator)

TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com

Komatsu excavators have set the standards for productivity, operator comfort and reliability over the years. And, with the introduction of our mid-sized –8 series, the standards have been raised yet again. • Tier-3 engines deliver reduced emissions without sacrificing power or productivity. • Electronics, engine and hydraulics are optimized for maximum efficiency and minimum fuel consumption (10% reduction compared to –7 models). • Multi-function LCD monitor provides critical operating information at a glance (and it can do this in 10 languages). From enhanced safety features to extended maintenance intervals, the PC200LC-8, PC220LC-8 and PC270LC-8 show what happens when the best engineers put the latest technology to work. The results are always…

100% Komatsu.

866.513.5778

www.komatsuamerica.com

Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Grove Hill • 251/275-4158 Mobile • 251/457-8991 Montgomery • 334/288-6580 Shoals Area • 256/383-5666 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 61

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. NEED TO BUY 2 D8L OPEN ROPS OR CAB WITH RIPPER GOOD UNIT USER ONLY Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@bulldozerjm.com –––––––––––––––––––––––––––––––– KOMATSU WA3805 | MAX 5000 HOURS CLEAN WORK READY Contact: RICHARD Phone: 603 828-6100 Email: cmisold@comcast.net –––––––––––––––––––––––––––––––– USED CAT ENGINE Contact: JASON GREENE Phone: 585-328-6849 OR 585-261-0804 Email: jayru9804@yahoo.com –––––––––––––––––––––––––––––––– CEMENT/LIME POWDER SPREADER | SEMI TRAILER TYPE CEMENT/LIME SPREADER FOR ROAD WORKS APPROX 20 TONNE CAPACITY Contact: TIM CAMPBELL Phone: 0749823863 Fax: SAME Email: timjulie@bigpond.net.au –––––––––––––––––––––––––––––––– KAWASAKI WHEEL LOADER 80ZA Contact: HAKIM Phone: 97148818035 Fax: 97148817638 Email: dakhanfz@eim.ae –––––––––––––––––––––––––––––––– HAMM 3410 UNDER 1000 HOURS Contact: DAVID LIGHT Phone: 512-961-2431 Email: david@dclenterpriese.net –––––––––––––––––––––––––––––––– SOMERO POWER RAKE | LOW HOUR POWER RAKE 2.0 Contact: TOM NACEY Phone: 651-214-1694 Email: nstarassets@gmail.com –––––––––––––––––––––––––––––––– TURBO FOR SK450 LC 1995 Contact: BOB COSMOS Phone: 321-228-3766 Email: bobcosmos@peceofmind.com –––––––––––––––––––––––––––––––– ZX 200 Contact: HAKIM Phone: 971 48818035 Fax: 97148817638 Email: dakhanfz@eim.ae –––––––––––––––––––––––––––––––– COSTRUCTION / MATERIAL HANDLING | LOOKING FOR LOADERS, EXCAVATORS, DOZERS, ROLLERS, FORKLIFTS, AND FORESTRY EQUIPMENT. Contact: PAUL MADSEN Phone: 407-468-1070 Fax: 407-850-3914 Email: cflresale@gmail.com –––––––––––––––––––––––––––––––– LOWBOY Contact: STEVE ALLEN Phone: 915-222-6894 Fax: 972-451-4523 Email: spartannmllc@aol.com –––––––––––––––––––––––––––––––– KUBOTA LA463 LOADER | NEED A COMPLETE LOADER FOR A 3400 KUBOTA LA-463 Contact: ARNOLD KLEIN Phone: 217-456-8711 Email: kaj4243@frontier.com ––––––––––––––––––––––––––––––––

NEED TO BUY 3 D10T UNDER 300 HOURS Contact: JEAN MAURICE BOUTIN Phone: 1-450-346-8975 Email: jeanmauriceboutin@bulldozerjm.com –––––––––––––––––––––––––––––––– JOHN DEERE 760 OR 760A Contact: MIKE MILLER Phone: 651-983-7978 Email: allie-cat10@msn.com –––––––––––––––––––––––––––––––– HYUNDAI 7807A WHEEL LOADER | MUST BE A HYUNDAI 780-7A WITH LESS THAN 5000 HOURS. Contact: BEAUFORD MULLINS Phone: 260 497 0500 Fax: 260 490 8217 Email: beauford@kortebros.com –––––––––––––––––––––––––––––––– BOBCAT T190 WITH JOYSTICK CONTROLS (SJC) WITH LOW HOURS Contact: RONALD PEREDO Phone: (239) 334-4987 Fax: (239) 334-7965 Email: rperedo@wejohnson-fl.com –––––––––––––––––––––––––––––––– 2 CRADLE 7082L06630 | HAVE TO BE NEW OEM KOMATSU Contact: ROBERTO J PALACIOS Phone: 786-287-7056 Fax: 305-573-7038 Email: cargoawaycorp@live.com –––––––––––––––––––––––––––––––– KOMATSU BR380JG1 TRACK CRUSHER • CLEAN LOW HOUR-BUYING FOR RESALE Contact: RICHARD Phone: 603 828-6100 Email: cmiequip@yahoo.com –––––––––––––––––––––––––––––––– NEED CATERPILLAR 320DL • HAS TO BE UNDER 3,000 HOURS AND HAVE A MEDIUM STICK WITH A/C AND BE LOCATED CLOSE TO GA, PRICE NO MORE THAN $125,000 NON ADVERTISED Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– THOMAS SKID STEER PARTS • I AM LOOKING FOR A RIGHT REAR AXLE FOR MY T133 SKID STEER PREFERABLY USED AS I CANT AFFORD A NEW ONE. THANKS G. LINTON Contact: GORD LINTON Phone: 613-227-1454 Email: gcl@rogers.com –––––––––––––––––––––––––––––––– LOOKING TO BUY KOMATSU D65EX15 | WE ARE LOOKING TO BUY KOMATSU BULLDOZER D65EX-15 WITH RIPPER. PLEASE OFFER WITH PICS, DETAILS AND WHOLESALE PRICES. OCEAN FREIGHT CHARGES TO KARACHI PORT, QUOTED SEPARATELY WOULD BE APPRECIATED. THANKS Contact: ATHER SIDDIQUI Phone: 00923332240692 Email: ather.cat@gmail.com –––––––––––––––––––––––––––––––– 850B CASE DOZER | Contact: RICH OR KATE Phone: 724-459-7060 ––––––––––––––––––––––––––––––––

KOMATSU D85EX15 • WE ARE SEARCHING FOR BOTH ENGINE ENCLOSURES FOR A KOMATSU D85EX-15. THE KOMATSU PART NUMBERS ARE: 154-54-72121 AND 154-54-74780 Contact: WENDELL CAIN Phone: 770-381-8984 Fax: 770-381-6977 Email: wendell@cainandtodd.com –––––––––––––––––––––––––––––––– GENIE AND JLG AERIAL LIFTS • LOOKING TO PURCHASE ANY JLG OR GENIE AERIAL LIFTS AND SCISSOR LIFTS. 2000 YEAR TO 2010 YEAR WHOLESALE IN RENTAL READY CONDITION Contact: SUE URBAN Phone: 330 304 4024 Fax: 330 319 8052 Email: sue@urbanaerial.net –––––––––––––––––––––––––––––––– BULLDOZER KOMASTU 375A 1 375A 2 375A 3 375A 5 WITH RIPPER Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@bulldozerjm.com –––––––––––––––––––––––––––––––– MINNIE DIGGER DERRICK SKY LIFT • SKY LIFT MINNIE33 Contact: BRET KREIS Phone: 561-214-0893 Fax: 561-745-0613 Email: bretkreis@aol.com –––––––––––––––––––––––––––––––– SERVICE PARTS AND OPERATION MANUALS • WE BUY MANUALSSERVICE PARTS AND OPERATION MANUALS. CALL AARON @ 503-5724169 FOR MORE INFORMATION. Contact: AARON HAYES Phone: 503-572-4169 Email: buyingoem@gmail.com –––––––––––––––––––––––––––––––– 4X4 BACKHOE W/ EXTENDA HOE Contact: CRAIG MOFFITT Phone: 585 755 8821 Email: craigm590@hotmail.com –––––––––––––––––––––––––––––––– USED 30" BUCKET FOR CASE 9045B Contact: K SANSALONE Phone: 856-297-4758 Email: kevin@sansaloneexcavating.com –––––––––––––––––––––––––––––––– BRUSH CHIPPER W/GRAPPLE Contact: JOHN CUMBERLEDGE Email: jtcledge@yahoo.com –––––––––––––––––––––––––––––––– BOMAG TAMPER,AND VIBRATORY PLATE Contact: JOHN R Phone: 918-246-2593 Fax: 918-246-2594 Email: jlratliff@cityofsandspringsok.com –––––––––––––––––––––––––––––––– NEED TO BUY PAIMENT OUT BULL D8 D9 D10 155 355 375 ENC CAB RIPPER NO JUNK Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@bulldozerjm.com –––––––––––––––––––––––––––––––– NEED TO BUY ALL THE TIME FROM USER D8 D9 D10 155 355 375 ENC CAB RIPPER Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmuriceboutin@bulldozerjm.com ––––––––––––––––––––––––––––––––

NEED TO BUY BULLDOZER 275A 5 KOMATSU Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER D8 D9 D10 155 355 375 ENC CAB WITH RIPPER USER NO SALESMAN Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– NEED TO BUY D8H WITH RIPPER FROM BANK OR CONTRACTOR USER ONLY Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@bulldozerjm.com –––––––––––––––––––––––––––––––– CAT 14G | NEED TO BUY 14G WITH RIPPER FROM 1980 ONWARDS Contact: NATACHA AUBIN Phone: 0033-698-174-467 Fax: 0033-486-556-091 Email: natacha@abnequipment.com –––––––––––––––––––––––––––––––– CAT D7G | NEED TO BUY CAT D7G WITH RIPPER CLOSE TO THE EAST COAST Contact: NATACHA AUBIN Phone: 0033-698-174-467 Fax: 0033-486-556-091 Email: natacha@abnequipment.com –––––––––––––––––––––––––––––––– KOMATSU POCLAIN | KOMATSU POCLAIN 200 EXCAVATOR Contact: PRAMOD MIRANI Phone: 982-223-3807 Email: pramodmirani@yahoo.com –––––––––––––––––––––––––––––––– ASPHALT PLANER/MILL FOR SKID STEER | WANT PLANER/MILL ANY SIZE Contact: JAMES MANN Phone: 404-273-9424 Fax: 770-306-2962 Email: james2525@msn.com –––––––––––––––––––––––––––––––– TELSMITH SCREEN VIBRATING UNIT | WE NEED A 28H, 280H, 280 VHF OR 220 VIBRATING UNIT FOR A TELSMITH SCREEN. IF THE PRICE IS RIGHT WE MIGHT BUY AN ENTIRE SCREEN IF IT HAS A WORKING UNIT ON IT. URGENT Contact: BEARCAT Phone: 406-677-2344 Email: jrceq@blackfoot.net –––––––––––––––––––––––––––––––– NEED TO BUY BULLDOZER D10T OR D10R ENC CAB RIPPER NOW LOW HOURS USER Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@bulldozerjm.com –––––––––––––––––––––––––––––––– BUCKET FOR TAKEUCHI TB016 | 12 INCH OR SMALLER BUCKET FOR A TAKEUCHI TB-016 MINI EXCAVATOR. Contact: ED FOSTER Phone: 828-859-6570 Email: boomlift1969@yahoo.com –––––––––––––––––––––––––––––––– LOADER BACKHOE LIKE TERRAMITE, ALLMAND AND ALSO MINI SKID STEERS LIKE TORO DINGO, DITCH WITCH, ETC. I WANT TO BUY IT IN WHOLESALE PRICES Contact: DAVE FRANCES Phone: 270-849-2270 Email: tritown1@msn.com ––––––––––––––––––––––––––––––––

KUBOTA D722 ENGINE NEEDED IN CT Contact: SAM SALES Phone: 860-729-1875 Email: samsales@salesauctioncompany.com –––––––––––––––––––––––––––––––– THOMAS PT35 EXCAVATOR BUCKET TEETH | LOOKING TO BUY 4 BOLT ON EXCAVATOR TEETH FOR A THOMAS MINI EXCAVATOR PT35. DOUBLE BOLT ON TYPE WITH 2 1/2 INCH SPACING BETWEEN BOLT CENTERS AND 5 1/8 INCH SLOT FITTING. PART NUMBER ME95266001 Contact: JAMES SLOAN Phone: 315-677-9960 Email: jsloan50@aol.com –––––––––––––––––––––––––––––––– CASE 580 LOADER BACKHOES Contact: FRANK HORAN TRICO EQUIPMENT Phone: 1-800-654-USED (8733) Email: fhoran@tricoequipment.com –––––––––––––––––––––––––––––––– CAT 950E WE ARE AN EGYPTIAN CO. INTERESTED IN IMPORTING A CAT 950E Contact: MOHAMED NEGM Phone: 0020113931932 Fax: 0020224186156 Email: alnegmgroup@yahoo.com –––––––––––––––––––––––––––––––– PLUMBING KIT FOR HYDRAULIC ON CAT E70B AND JD 160LC Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Email: lewequip@gmail.com –––––––––––––––––––––––––––––––– CONSTRUCTION EQUIPMENT / MATERIAL HANDLING WE BUY ALL TYPES OF CONSTRUCTION AND MATERIAL HANDLING EQUIPMENT. WE ARE LOCATED IN THE SOUTHEAST, USA. CALL TODAY: CENTRAL FLORIDA RESALE. Contact: PAUL MADSEN Phone: 407-468-1070 Email: cflresale@gmail.com –––––––––––––––––––––––––––––––– ASPHALT TRAILER 6500 GLS 95 TO 2 MODEL. 2000 YEAR 6 TO 7000 GALS. ETNYRE, FRU, HEIL,TRAIL,POLAR OK. Contact: DELIO Phone: 919 536 9687 Email: america2030@gmail.com –––––––––––––––––––––––––––––––– SERVICE AND PARTS BOOKS FOR 2002 CASE 590 SUPER M Contact: K SANSALONE Phone: 856-297-4758 Fax: 856-362-5602 Email: kevin@sansaloneexcavating.com –––––––––––––––––––––––––––––––– TOPCON GPS EQUIPMENT WANTED TO BUY USED TOPCON GPS EQUIPMENT. Contact: MIKE PIEPER Phone: 319-372-2276 Fax: 319-372-2277 Email: pi2279@yahoo.com –––––––––––––––––––––––––––––––– MORBARK 13 OR 15 PTO CHIPPER • USED MORBARK 13 OR 15 PTO DRIVEN CHIPPER Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Email: lewequip@gmail.com ––––––––––––––––––––––––––––––––

KOMATSU BG380 JG TRACK CONE • LOW HOUR WORK READY WHOLESALE PRICE Contact: RICHARD Phone: 603 828-6100 Email: cmiequip@yahoo.com –––––––––––––––––––––––––––––––– LOOKING FOR A 950F BALDERSON GP BUCKET Contact: MIKE SMITH Phone: 585-538-4395 Fax: 585-538-2467 Email: msmith@caledoniadiesel.com –––––––––––––––––––––––––––––––– LOOKING FOR A CAT 980C ENGINE GOOD CONDITION Contact: WILLIAM KYEREME Phone: 413-657-8096 Fax: 413-543-0748 Email: bill.chereme@gmail.com –––––––––––––––––––––––––––––––– GP BUCKET WANTED TO FIT JRB 418 SERIES COUPLER ON A DEERE 644H. NEEDS TO BE IN GOOD CONDITION APROX. 114" WIDE. Contact: ROGER BAKKER Phone: 902-626-6217 Fax: 902-964-3062 Email: excellcarriers@aol.com –––––––––––––––––––––––––––––––– CONCRETE PULVERIZER FOR CAT 325 Contact: SCOTT CORNELL Phone: 215-343-1830 Fax: 215-343-1564 Email: scornell@ahcornell.com –––––––––––––––––––––––––––––––– BOBCAT S130 • WE WOULD LIKE TO BUY 10 UNITS OF BOBCAT S130. MACHINES MUST BE READY TO RUN, GOOD LOOKING, AND IN GOOD CONDITION. PLEASE E-MAIL US WITH PHOTOS, PRICE AND LOCATION. Contact: AIMN Phone: +971504814823 Fax: +97165355291 Email: aimn@alwafaequipment.com –––––––––––––––––––––––––––––––– HIGH FLOW SKIDLOADER | 2-RUBBER TRACK SKIDLOADER 85 MIN HP-- HIGH FLOW CAB, A/C, HEAT , RIDE CONTROL, PILOT CONTROLS-- UNDER 1000 HRS AND IN GOOD SHAPE Contact: LARRY LEISTIKOW Phone: 608-655-1300 Email: lleistikow@yahoo.com –––––––––––––––––––––––––––––––– WE ARE BUYING EQUIPMENT! • CAT, KOMATSU, VOLVO, KAWASAKI, CALL US! • WE WANT TO BUY YOUR EQUIPMENT! | WE BUY CAT, KOMATSU WHEEL LOADERS, EXCAVATORS MOTOR GRADERS & DOZERS • WE ARE LOOKING FOR ALL SIZES OF CAT & KOMATSU WHEEL LOADERS ANY YEAR OR MODEL. WE ALSO BUY CAT & KOMATSU MOTOR GRADER, EXCAVATORS AND DOZERS. WE ALSO BUY ANY/ALL PARTS MACHINES. CALL SCHEER BROTHERS, LLC ASK FOR RHONDA OR DAVE Contact: RHONDA OR DAVID SCHEER Phone: 610-544-3399 Email: rhonda@scheerbrothers.com ––––––––––––––––––––––––––––––––

Page 62 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS AERIAL LIFTS Manlifts All Makes & Models Rental, Parts, Service, Training Modern Equipment Sales & Rental 800/445-4381

Sales, service, rebuilt units. Bursters, Rammers, Compact Geothermal Drills, Shop Training National Distributor Fagan’s Lehigh Equipment 609/476-3481 800/458-5238 faganslehigh@comcast.net www.terra-trenchless.com

BUCKETS

AIR COMPRESSORS

Excavator Bucket

Compressors

HUNDREDS OF NEW & USED BUCKETS, Nationwide Locator service, Sample “New Bucket” prices ...

Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

ASPHALT EQUIPMENT Asphalt Pavers Leeboy 8000, s/n 473, 8’-13’ conveyor paver, good condition, 3390 hours....................$9,900. Leeboy 1000B, s/n 1855, 8’-13’ gravoty paver, Hatz diesel, good condition, 1256 hours...........................$12,500. Casey Equipment 847-437-8686

Asphalt Rollers 2004 Cat CB534DXW, 832 hours ...........................$75,000 2005 Cat CS563E, 287 hours .....................................$75,000 2005 Cat CS563E, 1,778 hours .....................................$75,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

ATTACHMENTS

Excavators (30,000-40,000 lb) 24” $2,200, 30” - $2,400, 42” $2,600, 48” - $2,900 Excavators (40,000-55,000 lb) 24” $2,400, 30” - $2,600, 42” $2,900, 48” - $3,100 Excavators (55,000-65,000 lb) 24” $2,600, 30” - $2,800, 42” $3,100, 48” - $3,300 Call the Grappler at 856/778-4070

COMPACTION EQUIP. Pneumatic Rollers 1995 Leeboy 400, vibrates on rear drum, diesel engine, good condition.......................$5,500. 1988 Ferguson 8-12B Static Roller, JD diesel, 8-12 ton, good condition, 8490 hours ......................................$7,500. JFW Equipment, Inc. 336-685-4998

Misc. Compaction Equip. 2004 CAT 836G, 7159 hours ...................................$355,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Hammers

CRANES

2003 Cat H160............$55,000 2004 Cat H160............$55,000

Crane Inspections

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

BORING EQUIPMENT Trenchless Technology TERRA PIERCING TOOLS, DIRECTIONAL DRILLS

ALL TYPES OF CRANES INSPECTED AND CERTIFIED

Accredited by the US Dept. of Labor Under 29CFR Part 1919 and Accredited by CALOSHA Call 800-841-6189

Atlantic Crane Inpection Services Visit us at www.atlanticcrane.com

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 CRAWLER TRACTORS

EXCAVATORS

Crawler Tractor

Hydraulic Excavators

1997 John Deere 550G, LGP, open ROPS, PAT blade, new paint, average condition, 6724 hours...................$25,000

2006 Cat 303.5CCR, 698 hours.....................$39,900 2005 Cat 330CL, 2,366 hours................$199,000 2003 Cat 345BL, 4,941 hours................$199,000

Industrial Tractor Co. Inc. 904-296-5000 2004 4551 2004 3406

Cat D6RXLII, hours................$139,000 Cat D8RII, hours................$369,300 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

2007 John Deere 450J, LGP, ROPS, hydro trans., 124’’ 6way blade, very good condition, 1072 hours .................$57,375. 2005 John Deere 650J, LGP, ROPS, hydro trans., 128’’ screen and sweeps, good condition, 1806.................$57,800. Industrial Tractor Co. Inc. 843-572-0400

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2003 John Deere 330CLC, Lemac bucket with thumb, good condition, 11,468 hours...........................$85,000. 2005 Hitachi ZX330LC, 48’’ bucket, good condition, 4488 hours...........................$80,000. 919-329-0080

2007 JCB 8040, canopy, bidirectional hyd., rubber tracks, dozer blade, bucket, excellent condition, 275 hours ....................................$34,900. Casey Equipment 847-437-8686

FORESTRY EQUIPMENT Logging Equipment 1996 Caterpillar 320L stroke delimber, 31” pads, Balderson attachment, good condition, 7157 hours ...............$92,000 Five Star Equipment Inc. 607/775-2006

FORKLIFTS Industrial Forklifts Gradall/Lull Sales, Service, Training Modern Equipment Sales & Rental 800/445-4381

2001 John Deere 700H, 30” pads, lube rails, 132” 6-way blade, limb risers, rear & side screens, excellent factory warranty, 1500 hrs ...$121,000

2005 JCB JS130, cab, A/C, bidirectional hyd., 42’’ bucket and mechanical thumb, very good condition, 2000 hours ....................................$36,750.

Industrial Tractor Co. Inc. 843/572-0400

Casey Equipment 847-437-8686

2003 Deere 750C, LGP, PAT blade, open ROPS, screen, sweeps, hang in rake, good condition, 4560...........$64,000. 2004 Deere 700H, LGP, cab with A/C, 132’’ PAT blade, 30’’ pads, sweeps, screens, new hang on rake, good ocndition, 5244 hours..................$62,000.

2007 John Deere 120C, #17395, 28’’ pads, cab with A/C, 9’11’’ arm, aux. hyd., 36’’ Helac bucket, very good condition, 1099 hours ....................................$76.900. Industrial Tractor Co. Inc. 904-296-5000

305-949-2581

Industrial Tractor Co. Inc. 904-296-5000

Mini Excavators

LANDSCAPE EQUIP.

NH Construction Equipment New & Used Parts & Service

Misc. Landscape Equip.

NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

EMPLOYMENT WANTED Employment WORK WANTED SOUTHEAST Equipment operator with 30 years experience from the Northeast, looking to relocate to Southeast. NC, SC, GA or FL areas. All types of equipment. Call Jay 802-775-9675

Modern Equipment Sales & Rental 800-445-4381 Sell Your Bobcat to Us We Buy Used Bobcat Equipment Loader Services & Equipment 205/320-1000 2005 Deere 50D, 36’’ bucket, rubber tracks, push blade, very good condition, 1040 hours ..............................$32,000. Industrial Tractor Co. Inc. 904-296-5000

2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24’’ bucket, very good condition, 71 hours...........................$58,635. 2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24’’ BH bucket, very good condition, 55 hours...........................$57,200. 2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24’’ BH bucket, excellent condition, 38 hours. ....................................$73,700. 2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24’’ BH bucket, excellent condition, 384 hours...........$57,300. 2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24’’ BH bucket, good condition, 2862 hours..................$39,500. Industrial Tractor Co. Inc. 843-572-0400 1989 John Deere 410C, open ROPS, 2 wheel drive, 24’’ bucket, GP loader bucket, fair condition, 2600 hours ....................................$13,875.

GENERATORS

Industrial Tractor Co. Inc. 904-296-5000

Generators & Gen Sets

Skid Steer Loaders

For Sale or Rent All Makes & Models

Sell Your Bobcat to Us

Modern Equipment Sales & Rental 800/227-2525 2008 Ingersoll Rand G290 Portable Generator, , trailer mounted, NEW...........$57,000.

2004 Kubota L3430, open ROPS, rear hitch, AWD, 540 PTO, good condition, 1158 hours....................$18,500 Industrial Tractor Co. Inc. 904-296-5000

Track Loaders Backhoe Loaders 2005 JCB 214, cab, 4WD, Xdig, bucket of choice, very good condition, 1250 hours ....................................$48,500. Casey Equipment 847-437-8686

We Buy Used Bobcat Equipment Loader Services & Equipment 205/320-1000

Wheel Loaders NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2006 Cat 904B, 3,456 hours .....................................$29,000 2005 928GZ, 2519 hours .....................................$87,300 2006 Cat 972H, 3,180 hours ...................................$229,000 1998 Cat 990.............$599,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Track Loaders 2006 Libherr 632B, GP bucket, cab, air, very good condition, 2842 hours.........................Call

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 63

2003 Libherr 632B, front aux. hyd., cab, air, GP bucket, very good condition, 3462 hrs...Call 1999 Liebherr LR632, front aux. hyd., cab, GP bucket, good condition, 4660 hrs...Call 1999 Liebherr 622, cab, GP bucket, new U/C, good condition 6855 hrs..............$40,000. 919-329-0080 2006 Cat 953C, 1004 hours ...................................$135,000 Cat 953C, 3577 hours ...................................$115,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Call 1-800-753-2879 For Best Prices

OIL SPILL CLEAN-UP

Oil Eating Bacteria, Remediates water, soil “in place.” Use in fueling areas, shop floors, hydraulic hose breaks. OSHA and DEP preferred method.

Service We Service What We Sell! Warranty, Maintenance and More!

BOBCAT MULCHING ATTACHMENT SALE! Land Clearing Mulcher Sale Like New! Loader Services & Equipment Call 1-800-753-2879

Fagans’ Lehigh Equipment 609/476-3481 800/458-5238 faganslehigh@comcast.net

RECYCLING EQUIPMENT

PARTS

Screening Equipment

Miscellaneous Parts

MISCELLANEOUS

Loader Services & Equipment 205/320-1000

Oil Spills

JOHN DEERE USED PARTS All Makes In Stock! Nationwide Availability 1-800-344-3205 Industrial Tractor Co., Inc. Jacksonville, FL VISA/MC BOBCAT PARTS New and Used, Low Hour Equipment

Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors

Loader Services & Equipment Call 1-800-753-2879

Norris Sales Company 610/279-5777

BOBCAT - All Models New and Used Bobcat Parts Shipped to Your Door!

BEST DEALS Bohringer portable impactor ...................................$129,000 Finlay 393 3-in-1 screener ... .....................................$99,000 8 x 4 Shop Built portable screener. .....................$44,500 Portable Simplicity 6 x 20 Triple Deck .................$95,000 Portable Cedarapids 2540 Jaw, excllent .............$166,000 Portable 6 x 4 Mark II..$38,500 Various conveyors, stackers & idlers ...........................$6,000+ Mixing Plant with 28 x 6 drum .....................................$12,500 Sand/Gravel washing plant ..........................................POR SAND SCIENCE INC. 843/525-6140

RENTALS

Daily - Weekly - Monthly & Long Term Rentals Available

Rental

Stone, Wacker, Honda, Gehl, JLG to name a few .....

Construction Equipment Rentals

Norris Sales Company 610/279-5777

Modern Equipment Sales & Rental 800/445-4381 www.norrissales.com Daily - Weekly - Monthly Competitive Rates Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

SCRAPERS Motor Scrapers 1998 Cat 627F, 9,740 hours. ...................................$299,000 1998 Cat 627F, 10,307 hours ...................................$299,000

Now in PA & NJ Norris Sales Company 800/547-RENT (7368) 610/279-5777 Construction & Industrial Equipment Rentals Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping Norris Sales Company 610/279-5777 Construction & Equpment & Supplies for the “Professionals”

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

TRAINING Operator Training

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO? MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

TRUCKS Misc Trucks

All trainers NCCCO Certified

2004 Cat 735, 4,035 hours ...................................$249,000 2005 Cat 735, 3,738 hours ...................................$269,000 2006 Cat 740, 3,320 hours ...................................$305,000 1994 Cat D350D, 20,412 hours ...........................$49,000

Call 800-841-6189 Atlantic Crane Inpection Services Visit us at www.atlanticcrane.com

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

NCCCO Crane Operator Training Tower, Rigger and Signal Person. Trained at our location in PA or NJ or your location.

Classified...2 Insertions...95¢ Per Word

Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

Each

Block

CLASSIFIED RATES: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction Equipment Guide. CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________

STREET______________________________________________________________________PHONE NO. _________________________________________________ CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________ Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS EXP. DATE

CARD NUMBER

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE 1-800/523-2200 FAX 215/885-2910

470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

EZ Screen 550, Works with 1 Yard Loader or 96” Bucket, Excellent 5’x4’ Vibratory Screenbox! Ideal for site cleanups. One man = 50 yards a day+. Talk to the folks that own them. 2 Year warranty. This will be the fastest payback of ANY machine you’ve ever bought. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEW $9,500 plus freight. Other Screens Available 21 EB www.ez-screen.com • 866-745-5828

The 2010 EZ Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 20 Horsepower Deutz Diesel Engine ............................... .....................................................$39,500 plus freight Other Screens Available 21 EB www.ez-screen.com • 866/745-5828

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. For more information, call Construction Equipment Guide today at

800/523-2200

2009 IROCK Crusher RDS-15 Closed Circuit Crushing and Screening Plant. For more information call Sean Donaghy at 330/931-9595 21-22 EB

Page 64 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com Phone: 315-633-2944 • San Bernardino, CA Thurs., October 21, 2010 For: Rental Fleet Equipment, Cat, John Deere, Komatsu Construction Equipment, Aerials, Forklifts, Trucks and Trailers • Syracuse, NY Fri., October 22, 2010 For: Late Model Construction Equipment, Dump Trucks, Truck Tractors, Aggregate & Support Equipment

• Greenwich, NY Wed., December 29, 2010 For: Construction, Support Equipment, Attachments, Tools, Trucks, Equipment and Dump Trailers • Dallas, TX DATE TBA For: Construction and Support Equipment, Trucks, Trailers, Attachments and More! • Ledyard, CT (Foxwood Casino) DATE TBA For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers

• Albany, NY Sat., October 23, 2010 For: Complete Liquidation of John Deere, Case Construction Equipment, Support, Trucks and Trailers

RITCHIE BROS. AUCTIONEERS www.rbauction.com Phone: 402-421-2631

• Westminster, VT Sun., October 24, 2010 For: Probably the Finest Toy Train Collections East of the Mississippi

• Edmonton, AB, CAN October 27-28, 2010

• Orlando, FL Tues., October, 26, 2010 For: Construction and Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers • Syracuse, NY Sat., October 30, 2010 For: Late Model Cat, John Deere Earthmoving Equipment, Aerials, Forklifts, Trucks & Trailers • Houston, TX Tues., November 2, 2010 For: Late Model Rental Returns of Construction Equipment, Aerial Lifts, Forklifts, Trucks and Trailers • Queretaro, Mexico Fri., November 5, 2010 For: Construction and Support Equipment, Trucks and Trailers • Racine, WI Sat., November 6, 2010 For: Rental Fleet Construction, Aerial, Forklifts, Support Equipment, Truck and Trailers • Buffalo, NY Sat., November 13, 2010 For: Late Model Construction Equipment, Support, Trucks & Trailers • Manassas, VA Fri., November 19, 2010 For: Late Model Construction Support, Aerial Lifts, Trucks & Trailers • Rochester, NY Sat., November 20, 2010 For: Late Model Dump Trucks, Truck Tractors, Equipment Trailers, Construction Equipment, Aerials & Forklifts • Columbus, OH Fri., December 3, 2010 For: Truck Tractors, Van Trailers, Construction, Support Equipment • Allentown, PA Sat., December 4, 2010 For: Complete Liquidation of Automotive Dismantling Operation • Atlantic City, NJ Sat., December 18, 2010 For: Construction, Support Equipment, Attachments, Aerials, Trucks Tractors, Dump Trucks and Trailers

• South Bend, IN October 26, 2010

• Orlando, FL October 27, 2010 • Narita, Japan October 28, 2010 • Moncofa, Spain October 28-29, 2010 • Lethbridge, AB, CAN November 2, 2010 • Chilliwack, BC, CAN November 3, 2010 • Regina, SK, CAN November 3, 2010 • Houston, TX November 3-4, 2010 • Big River, SK, CAN November 5, 2010 • Las Vegas, NV November 5, 2010 • Albuquerque, NM November 9, 2010 • Avignon, France November 10, 2010 • Detroit, MI November 10, 2010 • Pittsburgh, PA November 11, 2010 • Bozeman, MT November 12, 2010 • London, KY November 16, 2010 • Spokane, WA November 16, 2010 • Hartford, CT November 17, 2010 • Phoenix, AZ November 18, 2010 • Meppen, Germany November 18, 2010 • Ocana, Spain November 18-19, 2010 • Tipton, CA November 19, 2010 • Brisbane, Australia November 23, 2010 • Grand Prairie, AB, CAN November 23-24, 2010 • Moerdijk, The Netherlands November 24-26, 2010 • Geelong, Australia November 25, 2010 • Truro, NS, CAN November 30, 2010

Coming Auctions • Saskatoon, SK, CAN December 1, 2010 • Fort Worth, TX December 1-2, 2010 • Caorso, Italy December 2, 2010 • Montreal, QC, CAN December 2-3, 2010 • Omaha, NE December 3, 2010 • Polotitlan, Mexico December 3, 2010 • Salt Lake City, UT December 3, 2010 • Toronto, ONT, CAN December 7, 2010 • Statesville, NC December 7, 2010 • Istanbul, Turkey December 8, 2010 • Columbus, OH December 8, 2010 • Dubai, UAE December 13-15, 2010 • Sacramento, CA December 14, 2010 BAR NONE AUCTION www.barnoneauction.com Phone: 866-372-1700 • San Bernardino, CA Fri., October 22, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Thurs.-Sat. November 11-13, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., November 19, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., December 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., December 17, 2010 For: Commercial Truck and Heavy Equipment Auction CAT AUCTION SERVICES www.catauctions.com Phone: 866-750-9432 • Baytown, TX Wed., October 27, 2010 For: Construction Equipment CHUCK YARBRO AUCTIONEERS, LLC www.yarbro.com Phone: 509-765-6869 ONLINE AUCTION Fri., October 22, 2010—10AM (PT) For: Large Machinery and Vehicle Auction DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com Phone: 800-433-6670 • Harrison, MI Thurs., October 21, 2010 For: Annual Fall Contractors Auction

HUNYADY AUCTION COMPANY www.hunyady.com Phone: 800-233-6898 • Elysburg, PA Fri., October 22, 2010 For: CRT Forklifts, Trucks and Concrete Equipment • Brimfield, OH Thurs., November 4, 2010 For: Construction Equipment. Trucks and Trailers IRAY AUCTIONS www.iraymn.com Phone: 320-968-7230 • Portage, WI Fri., October 29, 2010 • Lime Springs, IA Fri., November 19, 2010 • Foley, MN Fri., December 3, 2010 IRON PLANET AUCTIONS www.ironplanet.com Phone: 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • Thurs., October 21, 2010 For: North America Auction • Fri., October 22, 2010 For: North America Auction • Wed., October 27, 2010 For: Auto and Powersport Auction • Thurs., October 28, 2010 For: North America Auction • Thurs., November 4, 2010 For: Construction Equipment • Thurs., November 11, 2010 For: Construction Equipment • Thurs., November 18, 2010 For: Construction Equipment JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com Phone: 800-426-3008 • Kenmore, WA Sat., October 23, 2010 For: Contractors Equipment, Heavy Trucks and Trailers J.M. WOOD AUCTION COMPANY www.jmwood.com Phone: 800-447-7085 • West Columbia, SC Thurs., October 21, 2010 For: Gigantic Construction Equipment Auction • Montgomery, AL Fri., October 29, 2010 For: Alabama Dept. of Transportation • Montgomery, AL Thurs., November 4, 2010 For: Absolute Waterfront Property Auction

JOSEPH FINN CO. AUCTIONEERS & APPRAISERS www.delpeterson.com Phone: 617-964-1886 • Lexington, MA Tues., October 26, 2010 For: Vehicles, Skid Steer, Tools MEEKINS AUCTION COMPANY www.meekinsauction.com Phone: 800-499-6560 • Lumberton, NC Tues., December 28, 2010 For: 16th Annual December Contractors Auction NITKE AUCTIONS www.nitkeauctions.com Phone: 715-362-6162 • Wausau, WI Fri.-Sat, October 22-23, 2010 For: 2-Day Construction Equipment, Truck & Trailer Auction PURPLE WAVE AUCTION www.purplewave.com Phone: 866-608-9283 • INTERNET ONLY AUCTION Bidding Starts to Close Thurs., October 28 at 10:00 For: Construction Equipment RDO AUCTIONS www.rdoauctions.com Phone: 866-536-5189 • ONLINE ONLY AUCTION October 20-27, 2010 For: Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com Phone: 800-806-3395 • Lebanon, TN Sat., December 11, 2010 RYAN AUCTION SALES www.ryanauctionsales.com Phone: 603-491-6159 ¥ Tues., October 26, 2010 @ 9:00 am Virtual Equipment & Truck Auction ¥ Tues., Nov. 30, 2010 @10:00 am Virtual Equipment & Truck Auction ¥ Thurs., Dec. 16, 2010 @10:00 am Virtual Equipment & Truck Auction SALES AUCTION COMPANY, LLC www.salesauctioncompany.com Phone: 860-627-7506 • Windsor Locks, CT Sat., October 23, 2010 For: Earthmoving and Heavy Equipment, Trucks and Trailers STOCK AUCTION COMPANY www.stockra.com Phone: 800-937-3558 • TIMED INTERNET ONLY AUCTION Wed., October 27, 2010 www.bigiron.com • Fullerton, NE Thurs., October 28, 2010 For: Farm Machinery Auction

• Tecumseh, KS Thurs., November 4, 2010 For: Farm Machinery Auction • TIMED INTERNET ONLY AUCTION Wed., November 10, 2010 www.bigiron.com • Waco, NE Tues., November 16, 2010 For: Farm Machinery Auction • Great Bend, KS Thurs., November 18, 2010 For: Farm Machinery and Harvest Equipment • TIMED INTERNET ONLY AUCTION Wed., November 24, 2010 www.bigiron.com • Casper, WY Thurs., December 2, 2010 For: John Deere Farm Equipment • TIMED INTERNET ONLY AUCTION Wed., December 8, 2010 www.bigiron.com • Columbus, NE Thurs., December 9, 2010 For: Behlen Mfg. Co. Winter Auction • TIMED INTERNET ONLY AUCTION Wed., December 22, 2010 www.bigiron.com TAMPA MACHINERY AUCTION, INC. www.tmauction.com Phone: 813-986-2485 • Tampa, FL Sat., November 13, 2010 • Tampa, FL Sat., December 11, 2010 UTILITY AUCTIONS www.utilityauctions.net Phone: 302-530-9103 • Wilmington, DE Fri., October 22, 2010 For: Public Auction Construction and Utility Equipment VAUGHAN AUCTION GROUP www.vaughanauctiongroup.com Phone: 903-873-6777 • Wills Point, TX Fri., October 29, 2010 For: Fall Contractor s Auction WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com Phone: 800-443-9580 • York Springs, PA Fri., October 29, 2010 For: Southern PA Contractors Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com Phone: 419-865-3990 • Darlington, PA Thurs., October 21, 2010 For: Construction Equipment, Trucks and Trailers • Bow, NH Thurs., November 18, 2010 For: Construction Equipment, Trucks and Trailers • Kissimmee, FL February 7-15, 2011 For: Construction Equipment, Trucks and Trailers

Twenty-Five States, District of Columbia Add Jobs in August Construction jobs were added in half the states in August, while the number of states with year-over-year job gains rose to 10 from just six in July, the Associated General Contractors reported in an analysis of state employment data released Sept. 21 by the Labor Department. The number of states that increased construction employment over 12 months was the largest since October 2008. “National construction employment has been flat since March, and more areas have seen an upturn in employment, while job losses in the remaining states are less severe than previously,” said Ken Simonson, chief economist of the construction trade association. “But the gains may be fleeting unless Congress and the Administration enact long-term infrastructure funding bills before the current stimulus funds are exhausted.” Simonson noted that the largest yearover-year increase was in New Hampshire, where construction employment rose 9.6 percent (2,100 jobs), followed by Oklahoma (9.5 percent, 6,300 jobs); Kansas (4,600 jobs, 8.1 percent); District of Columbia (3.7 percent, 400 jobs); and Arkansas (3.5 percent, 1,800 jobs).

The largest percentage job decrease compared to August 2009 was in Nevada, 19.6 percent (14,700 jobs), followed by Vermont (14.1 percent; 1,900 jobs); Idaho (13.1 percent, 4,300 jobs); and Colorado (12.2 percent, 15,300 jobs). California again lost the most jobs since August 2009 (44,700 or 7.6 percent), and also over the last month, losing 3,900 jobs, a 0.7 percent decline. Illinois gained the most jobs in August with 14,200 new jobs, or a 7.7 percent increase, due in part to the end of a strike. Illinois gains were followed by Rhode Island (900 jobs, or 5.6 percent increase); and Oklahoma (2,700 jobs, 3.8 percent increase). Meanwhile, Alaska had the largest monthly decline, losing 1,100 jobs, or 6.7 percent, followed by New Mexico (1,700 jobs, 3.8 percent) and Minnesota (2,500, 3.0 percent). “AGC urges Congress and the White House to finish work on long-term transportation and water infrastructure spending bills, and keep income tax rates from soaring to help the construction industry employment recover from millions of lost jobs,” said Stephen E. Sandherr, the association’s chief executive officer.

Surf the Internet

The News, Equipment and all the information you need to keep up with the Construction industry @

www.construction equipmentguide.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 65

RENTAL FLEET AUCTION Construction, Support Equipment, Aerial Lifts, Forklifts, Trucks & Trailers. RSC NEFF RENTALS TUESDAY, OCTOBER 26 @ 9:30 A.M. KISSIMMEE, (WINTER GARDEN) FLORIDA DIRECTIONS: From Tampa: I-4E to Rte. 27N for 6.5 miles to Rt. 192E for 1 mile. Left on Avalon Rd. for 3 miles to sale site on left. From Orlando: I-4W to Rt. 192W for 5.5 miles, turn right on Avalon Rd. to sale site. Address: 12601 State Rd. 545 North (Avalon Rd.), Winter Garden, FL 34787. NOTE: Selling will be late model rental fleet equipment from several large Florida Rental Fleets in excellent condition. HILITES: 4 ARTICULATED HAUL TRUCKS: (4) Cat D400E, 30 HYDRAULIC EXCAVATORS: Unused Volvo EC240BLC, 2004 Volvo EC210LC, Cat 330L, 2006-2005 Cat 320CL, 2005-2004 Case CX330LC, 2004-2003 Case CX240LC, 2004 Case CX210LC, Case CX210LC, 2005-2004-2003 Kobelco SK330LC, Kobelco SK300LC, IR ZX125, Bobcat 325G, 2005 Bobcat 322, 2004-2003 IHI 80NX, (3) IHI 35NX, 2004 IHI 35N, 2005(5) IHI 28N, 2005 IHI 9NX, RUBBER TIRED EXCAVATOR: 2008 Hitachi ZX180, MOTOR GRADERS: 2002 Cat 140HVHP, PULL PAN: Michigan 24 yard, 9 RUBBER TIRED LOADERS: (2) 2004 JD 544J, JD 544E, (2) 2004 Komatsu WA250, Cat 928F, (2) Kawasaki 80Z Series II, Volvo L35BZD, 10 CRAWLER TRACTORS: 2002 Cat D6R, Cat D6RLGP, Cat D5M, , 2005 JD 750JLGP, 2004 JD 700H, (2) 2004 JD 650H, 2004 JD 450HLGP, 2006 Case 1150KWT, 2006 Case 650K, 10 TRACTOR LOADER BACKHOES: Unused 2010 JCB 3CX (4x4), (2) 2004 JCB 214E (4X4), 2007 JD 310J (4x4), (2) JD 310 Super G (4x4), JD 710C (4x4), 2006 Case 580M-II (4x4), Case 580 Super L (4x4), Case 580K (4x4), SOIL COMPACTORS: Cat 825B, LANDFILL COMPACTORS: Rex 355B, ASPHALT ROLLERS: Hyster C627B, 6 VIBRATORY ROLLERS: IR SD100F, 2007 IR SD100D, 2007-2004 IR SD70D, 2005 Hamm 3307, 2005 Wacker RT82, 2 RUBBER TRACKED SKID STEERS: 2005 Bobcat T250, 2006 Bobcat T190, 2 SKID STEERS: (2) 2006 Bobcat S175, 2 TRENCHERS: 2005 Ditch Witch RT40, 2005 Ditch Witch 1330, 6 TELESCOPIC FORKLIFTS: 2001 Skytrak 10054, (2) 2001 Lull 1044C-54, Lull 844C-42, 2004 Gehl RS8, JCB 508, 2 ROUGH TERRAIN FORKLIFTS: 2004 IR RT706, Taylor TYEB-160S, 3 PIGGY BACK FORKLIFTS: (3) Moffett M5000, 10 FORKLIFTS: Cat V250B, Cat DP70, Komatsu FD40ZT-5, Toyota 5FD7V, Hyster H135XL, (2) Hyster H110XL, Hyster H100XL, Clark 6500Y50, Linde H300, 16 BOOM LIFTS: Snorkel Pro126, Snorkel TBA80, (5) Snorkel TB60, (4)Snorkel TBA60, (5) Snorkel TB42, 13 SCISSOR LIFTS: 2001 JLG 400CRT, JLG 33RTS, (2) 2005 Skyjack SJ7127, Genie GS2646, (7) 2005 Genie GS1930, MEC 33RT, GENERATORS: Cat 15kw, WELDER: G Walker GW WE250 250amp, 5 LIGHT PLANTS: (3) 2005 Amida AL4060D4MH, 2005 Lincoln SAE400, 2005 Magnum MLT3060, 6 PUMPS: 2003 Myers Seth SPHA10SE 4in., Myers Seth SPHOY0SE 4in., (4) 5.5hp 2in., 6 BOOM TRUCKS: (5) 1999 Int’l. 4700 (s/a), 1999 GMC C7H042 (s/a), TRUCK TRACTORS: 1999 Kenworth T800 (t/a),WATER TRUCK: 2000 GMC C7H042, DUMP TRUCKS: 2003 Mack CV713 (tri.), 3 DETACHABLE GOOSENECK TRAILERS: (2) 2011 Witzco 50T (tri.), 2011 Witzco 35T (t/a), EQUIPMENT TRAILERS: 1987 Trailking 35 ton (t/a), 17 ROLLOFF CONTAINERS, ATTACHMENTS: Skid Steers: Pallet Forks, Stump Buckets, Hay Spears, Mount Plates, Low Profile & Smooth Buckets, Tree Booms, Backhoes, Forks, Thumbs, Snow & Mulch Buckets, Forklifts: (6) Forks, (2) Cascade Fork Positioners, SUPPORT EQUIPMENT: Bench Drill Press,14 tin Rake, 2,000lb. Winch, Fans, (2) 2010 Easy Kleen Magnum 4000 Pressure Washer, Plate Compactors, Jumping Jacks, Blades, Pintle Hitches, Cargo Straps, Air Spray Gun Kits, Air Hose, Impact Wrenches., Chop Saws, Straps, Floor Jacks, Winches, Bottle Jacks, Hose Reels, Trailer Jacks, Chainsaws, Weedeaters, Grinders, Grills, Wagons, Tricycles, Battery Chargers, Air Conditioners, Light Stands, Tool Kits. FLORIDA AUCTIONEER LICENSE: #AU 0001548, FLORIDA LICENSE: #AB-1091. SALE SITE PHONE: (407) 239-2700, (770) 537-7386, FAX: (407) 239-0068.

Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com The Complete Auction And Appraisal Service

ALEX LY N & SON SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

Page 66 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Late Model Groves Go on Block at Alex Lyon Atlanta Sale

Attending the sale with a primary interest in bidding on the late model cranes are (L-R) Shaune Rados and Michael Liptak, both of ALL Erection & Crane Rental, Cleveland; Kris Foster, Wells Fargo, Louisville, Ky.; and Larry Freckmann, ALL Crane Rental, Atlanta.

Checking the fluids and engine wear on a Komatsu D65EX dozer is Ken Geiger, TRAX Trading, Atlanta.

lex Lyon & Son Auctioneers held an auction west of Atlanta in Bremen, Ga., on Oct. 7. The sale included machines from Cyclone Land Development Co. Inc., Atlanta, as well as rental returns from Cowin Equipment and Neff Rentals and featured a nice package of late model, low-hour Grove rough-terrain cranes.

After test operating a Cat 621G scraper, Billy Seals, Thompson Tractor, Birmingham, Ala., jots a few noteworthy items about the machine. Keeping an eye on the pricing of the scrapers in the auction line-up are Mark Dyer (L), MEGA Machinery, Knoxville, Tenn.; and Lee Mashburn, Mashburn Equipment Sales & Rentals, Ringgold, Ga.

As the auction is underway, Terry Barksdale (L), Alex Lyon & Son; and Dick Tabb, Tabb Equipment Sales, Roswell, Ga.; discuss some of the machines being sold.

A Grove RT880E, the first of the seven late-model Grove rough-terrain cranes to sell at this auction, rolled out at a final bid of $455,000.

“You in or you out,” says Jack Lyon of Alex Lyon and Son Auctioneers as he auctions off some of the excavators at the Bremen, Ga., sale.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 67

HOUSTON OCTOBER 27, 2010

2003 CAT 320C

2005 CAT 963C

FOLLOW THE

NEW LEADER

OCTOBER 27

9LOCAL A.M TIME

2000 CAT 140H

Houston Raceway Park 2525 FM565 South // Baytown, Texas

UNRESERVED PUBLIC AUCTION

Our auctions offer a wide variety of equipment makes and models, as well as premium services from the Cat name you already know and trust. Search the full equipment listing and register to bid online at:

www.catauctions.com /october2010 Auction Administered by Taylor & Martin, Inc. - TX Auction License Nos.: Robert Kent Petersen 12298, Wilson Clem 15625, Joel W. Marreel 14019. Titled motor vehicles and equipment will be sold by Cat Auction Services, Texas Dealer License P109513.

Follow the new leader.™ www.catauctions.com

CAT AUCTION SERVICES 8050 County Road 101 East Shakopee, MN 55379 866.750.9432 info@catauctions.com

2003 CAT 416D *Equipment subject to change ©2010 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 68 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2 UPCOMIING AUCTIONS JDPS Earns Certifications AUCTION 1

ALABAMA D.O.T. Absolute Public Auction Alabama Dept. of Transportation Friday, Oct. 29, 2010 @ 9AM Montgomery, AL (ALDOT Facility)

AUCTION 2

Absolute Waterfront Property Auction Over 20 Homesites! Thurs., Nov. 4, 2010 @ 2PM • Montgomery, AL • Lake Woodruff on the Alabama River • World Class Golf Just Downstream Year Round Sportsman's Paradise! • Private Gated Community 12,000 Acres of Public Hunting w/in 25 min • Boat Ramp. • 10 min. Boat Ride from Downtown Montgomery Entertainment District

3475 Ashley Road • Montgomery, AL 36108

Phone: 1-800-447-7085 • Fax: 334-269-6990 GO TO: www.jmwood.com FOR COMPLETE LISTING AND COLOR PICTURES Bryant Wood Avant broker 66103 Wood Alabama License #1137 • Greg Avant

for PowerTech 6.8L Engines

John Deere Power Systems’ (JDPS) PowerTech PVX 6.8L above 174 hp (130 kW) and its PowerTech PSX 6.8L engines have been certified by the Environmental Protection Agency (EPA) and European Union (EU) as compliant with the Interim Tier IV and Stage III B regulations. The PowerTech PSX and PVX 6.8L engines join the certified 9.0L engine models. John Deere’s PowerTech PVX and PSX 9.0L engine models were the first engines to receive EPA and EU Interim Tier 4/Stage III B certification early this year. “The EPA and EU certification of our 9.0L engines was a tremendous milestone for JDPS, and now with the 6.8L engines certified we believe it clearly demonstrates our commitment to offer the right technology at the right time,” said Doug Laudick, product planning manager of JDPS. “We also remain committed to ensuring that our Interim Tier 4/Stage III B engines deliver performance, reliability, durability and low operating costs that OEMs and customers have come to depend upon. Our certified Interim Tier IV engine lineup provides OEMs with emission reduction technologies that are paying off for the environment and their customers.” Interim Tier IV/Stage III B emissions regulations begin Jan. 1, 2011, for 174 hp (130 kW) and above engines and require a 90 percent reduction in diesel particulate matter (PM) and a 50 percent reduction in nitrogen oxide (NOx) from previous Tier III/Stage III A requirements. John Deere met the challenge of Interim Tier IV/Stage III B regulations by starting with its PowerTech Plus Tier III/Stage III A engine platform — which includes cooled exhaust gas recirculation (EGR) for NOx control — and adding an exhaust filter for reducing PM. These engines will feature full-authority electronic controls, a 4-valve cylinder head, a high-pressure fuel system, single variable geometry or series turbocharging and an air-to-air aftercooling system. “The Interim Tier IV/Stage III B certification of our 6.8L models confirms our validation processes. Our field and lab testing continues to ensure the final product will meet the unique requirements expected from offhighway diesel engines,” Laudick said. “We have received very positive feedback from

John Deere Power Systems’ PowerTech PVX 6.8L above 174 hp (130 kW) and its PowerTech PSX 6.8L engines have been certified by the Environmental Protection Agency and European Union as compliant with the Interim Tier IV and Stage III B regulations.

customers testing our Interim Tier IV/Stage III B powered machines in the field. And, we remain committed to ensuring our engines withstand the extreme vibration, temperatures and duty cycles found in those applications.” In choosing a solution for Interim Tier IV/Stage III B, John Deere elected not to use selective catalytic reduction (SCR). John Deere’s cooled EGR and exhaust filter approach provides OEMs and end users a proven solution with the best total fluid economy. The single-fluid approach of cooled EGR means owners and operators won’t have to incur the cost of diesel fuel plus the additional cost for diesel exhaust fluid (DEF) required by SCR systems. “For Interim Tier IV/Stage III B, we’re not only looking at fuel economy, we’re taking into consideration total fluid consumption,” said Brian Brown, manager of worldwide marketing support for JDPS. The certified PowerTech PVX 6.8L offers a power range of 185 to 250 hp (138 to 187 kW), while the PowerTech PSX 6.8L offers 225 to 300 hp (168 to 224 kW).

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ October 20, 2010 â€¢ Page 69

Complete Liquidation Thursday, October 28 Featuring equipment in SC

&$7 '/ ([FDYDWRU

'HHUH - /*3 'R]HU

&$7 % 6NLG 6WHHU

&$7 + *UDGHU

0DFN &+ /XEH 7UXFN

&$7 ' 0/*3 'R]HU

&$7 ) 6FUDSHU

1997 CAT 815F Compactor

&$7 ) 6FUDSHU

AIR COMPRESSORS Ingersoll-Rand 2475F12.5G Compressor, Lot of (2) Ingersoll-Rand Portable ATTACHMENTS â€“ CONSTRUCTION American &RPSDFWLRQ :KHHO &RPSDFWLRQ :KHHO &DWHUSLOODU %XFNHW Â¿WV % ([FDYDWRU &DWHUSLOODU %XFNHW Â¿WV % ([FDYDWRU &DWHUSLOODU %XFNHW Â¿WV & ([FDYDWRU &DWHUSLOODU &RPSDFWLRQ :KHHO Â¿WV %/ ([FDYDWRU &DWHUSLOODU %XFNHW Â¿WV &DW ([FDYDWRU %XFNHW &DWHUSLOODU ' 5RRW 5DNH %ODGH 0RXQW 7\SH &DWHUSLOODU ' 5 6ZHHSV &DWHUSLOODU ' 1 5236 6WUXFWXUH )HOFR Â´ &RPSDFWLRQ :KHHO %XFNHW Â¿WV &DW )OHFR ' 5RRW 5DNH %ODGH 0RXQW W\SH /RDGHU 5RRW 5DNH Â¿WV &DW ,7 1RUWK $PHULFDQ &RPSDFWLRQ :KHHO BACKHOES Case 580E Backhoe Loader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aterpillar IT28G Integrated Tool Carrier OTHER /RW RI 3LFN 8S %R[HV -RE %R[ /RW RI [ 0RWRU *UDGHU 7LUHV /RW RI 5 7LUHV /RW RI $VVRUWHG +RVHV /RW RI $VVRUWHG 3LSHOLQH 6XSSOLHV /RW RI &RQWUDFWRU 6XSSOLHV 3UHFLVLRQ 6RODU )/ :) SCRAPERS &DWHUSLOODU ) &DWHUSLOODU ) &DWHUSLOODU % (OHYDWLQJ SKID-STEERS 1HZ +ROODQG /; 6NLG 6WHHU /RDGHU &DWHUSLOODU % TOOLS Apache, Model 2 Pipe Laser, &RUHGULOO Z 9DULRXV 'ULOO %LWV /RW RI 6WLKO 76 3LSH 6DZV /RW RI $VVRUWHG /HYHOV 7ULSRGV /RW RI $VVRUWHG 7RROV 3LSH 7HVW 8QLW Z $VVRUWHG 3LSH 3OXJV 5HVFXH +RLVW Z 7ULSRG TRAFFIC CONTROL /RW RI 3ODVWLF 6DIHW\ %DUUHOV /RW RI 6DIHW\ 6LJQV %UDFNHWV 3UHFLVLRQ 6RODU )/ :) 3URWHFWLRQ 6HUYLFH 7UDLOHU 0WG 6RODU 0HVVDJH %RDUG TRUCKS â€“ DUMP 0DFN '0 6 7UL $ TRUCKS â€“ FUEL/LUBE 0DFN &+ 7 $ TRUCKS â€“ SERVICE/MECHANIC )RUG ) 6HUYLFH 7UXFN WATER RELATED EQUIPMENT /RW RI 6XEPHUVLEOH 3XPSV 2SHUDEOH 3DUWV

Inspected and Guaranteed www.ironplanet.com s 888-433-5426 Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Page 70 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SON INC KISSIMMEE FL ......................................................................65 ALLU GROUP ................................................................................25 ANACONDA CONVEYORS USA INC ............................................45 ASC CONSTRUCTION EQUIPMENT USA ..................................3,9 ASE SERVICES LLC ......................................................................12 BARGAINS......................................................................................63 BEASLEY FOREST PRODUCTS ..................................................19 BLANCHARD MACHINERY USED PARTS ..............................17,49 BROOKS SALES INC ....................................................................12 CASE CONSTRUCTION ................................................................55 CAT AUCTION SERVICES HOUSTON TX ........................................................................67 CATERPILLAR INC ........................................................................21 CEG SCALE MODELS ..................................................................26 CERTIFIED BOOM REPAIR SERVICE ..........................................23 CLASSIFIEDS ............................................................................62,63 COBLE TRENCH SAFETY ............................................................10 CONSTRUCTION EQUIPMENT CO ..............................................43 CONSTRUCTION EQUIPMENT GUIDE WANTED ................................................................................61 TRAILER PROMO SUPPLEMENT ........................................34 D & E MFG......................................................................................20 DOOSAN HYDRAULIC BREAKERS ..............................................46 DOOSAN INFRACORE AMERICA CORP ......................................27 DOOSAN PORTABLE POWER ......................................................53 DURATECH ....................................................................................38 DYNAPAC ......................................................................................29 EFFICIENCY PRODUCTIONS ......................................................29 FELLING TRAILERS ......................................................................32 FINANCIAL FEDERAL CREDIT........................................................6 FLANGE LOCK ..............................................................................19 FLECO ATTACHMENTS ................................................................22 FUTCHS TRACTOR DEPOT ..........................................................16 GATORBACK TRACKS & EQUIPMENT ........................................48 GEHL ..............................................................................................29 HILLS MACHINERY COMPANY ....................................................72 HITACHI CONSTRUCTION MACHINERY ................................50,51 HYDREMA U S INC ..........................................................................9

INDECO NORTH AMERICA ..........................................................47 INTERNATIONAL CONSTRUCTION ..............................................15 IROCK CRUSHERS........................................................................42 IRON PLANET ONLINE AUCTION ................................................................69 JCB OF FLORIDA AND SOUTH GEORGIA ..................................17 JM WOOD AUCTION ALABAMA D.O.T.....................................................................68 JOHN DEERE ............................................................................15,59 KAWASAKI CONSTRUCTION MACHINERY ................................56 KMP USA LTD ................................................................................48 KOMATSU AMERICA CORP ..........................................................60 LINDER INDUSTRIAL MACHINERY CO................................7,36,37 MOBRO MARINE INC ......................................................................2 MR MANHOLE SYSTEMS..............................................................11 MWI CORP ....................................................................................23 NEW HOLLAND CONSTRUCTION................................................52 NORCO ATTACHMENTS................................................................25 NPK CONSTRUCTION EQUIPMENT INC ....................................30 OKADA AMERICA ..........................................................................42 PILE EQUIPMENT INC ..................................................................19 POWERSCREEN MID-ATLANTIC..................................................39 REMU SCREENING TECHNOLOGY ............................................38 RITCHIE BROS. AUCTIONEERS AUCTION CALENDAR ..........................................................71 ROAD BUILDERS MACHINERY ....................................................22 ROCKLAND MFG CO ....................................................................16 RSC EQUIPMENT RENTAL ..........................................................20 SAND SCIENCE ............................................................................42 SCHAEFER ENTERPRISES ..........................................................48 SENNEBOGEN ..............................................................................41 SOLESBEES EQUIP & ATTACHMENTS..........................................6 SOUTHERN TRACTOR SERVICE ................................................49 STAFFORD ..................................................................................5,12 TEREX CRANES ............................................................................57 THOMPSON MACHINERY USED PARTS ....................................49 TOWMASTER INC..........................................................................33 TREKKER TRACTOR ....................................................................13 TRENCH SHORING SERVICES ....................................................23

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 20, 2010 • Page 71

EVERYTHING SELLS TO THE HIGHEST BIDDER

Auction Update NORTH EAST, MD, USA PICTON, ON, CAN SAN ANTONIO, TX, USA PRINCE GEORGE, BC, CAN SOUTH BEND, IN, USA EDMONTON, AB, CAN ORLANDO, FL, USA NARITA, JAPAN MONCOFA, SPAIN LETHBRIDGE, AB, CAN CHILLIWACK, BC, CAN REGINA, SK, CAN HOUSTON, TX, USA BIG RIVER, SK, CAN LAS VEGAS, NV, USA ALBUQUERQUE, NM, USA AVIGNON, FRANCE DETROIT, MI, USA PITTSBURGH, PA, USA BOZEMAN, MT, USA LONDON, KY, USA SPOKANE, WA, USA

410.287.4330 800.357.0659 210.662.8906 250.963.8491 815.941.6400 780.955.2486 863.420.9919 +81.476.49081 +34.964.580.559 780.955.2486 604.823.2700 306.776.2397 713.455.5200 306.933.9333 702.644.2468 505.836.0738 +31.168.392.200 734.587.3200 724.947.7240 360.956.1500 615.453.4549 360.956.1500

* *

OCT 19 OCT 19 OCT 19 OCT 20 OCT 26 OCT 27 & 28 OCT 27 OCT 28 OCT 28 & 29 NOV 2 NOV 3 NOV 3 NOV 3 & 4 NOV 5 NOV 5 NOV 9 NOV 10 NOV 10 NOV 11 NOV 12 NOV 16 NOV 16

Upcoming Unreserved Public Auctions

HARTFORD, CT, USA TONDELA, PORTUGAL PHOENIX, AZ, USA MEPPEN, GERMANY OCANA, SPAIN TIPTON, CA, USA BRISBANE, AUSTRALIA GRANDE PRAIRIE, AB, CAN MOERDIJK, THE NETHERLANDS GEELONG, AUSTRALIA TRURO, NS, CAN SASKATOON, SK, CAN FORT WORTH, TX, USA CAORSO, ITALY MONTREAL, QC, CAN OMAHA, NE, USA POLOTITLAN, MEXICO SALT LAKE CITY, UT, USA TORONTO, ON, CAN STATESVILLE, NC, USA ISTANBUL, TURKEY COLUMBUS, OH, USA

410.287.4330 +34.925.157580 602.269.5631 +49.541.98.1330 +34.925.157.580 559.752.3343 +61.7.3382.4444 780.538.1100 +31.168.392.200 +61.3.5245.3333 902.895.3700 306.933.9333 817.237.6544 +39.0523.818801 450.464.2888 816.633.4096 +52.427.266.0909 801.250.1836 905.857.2422 +90.216.3945465 937.568.9500

NOV 17 NOV 18 NOV 18 NOV 18 & 19 NOV 18 & 19 NOV 19 NOV 23 NOV 23 & 24 NOV 24 - 26 NOV 25 NOV 30 DEC 1 DEC 1 & 2 DEC 2 DEC 2 & 3 DEC 3 DEC 3 * DEC 3 DEC 7 DEC 7 * DEC 8 DEC 8

*NOTE NEW DATE - Dates are subject to change

Can't make it to the auction? Place your bids over the Internet at rbauction.com. Submit proxy bids in advance of any auction, or place real-time bids through our live auction broadcasts. Click rbauctionBid on the Ritchie Bros. web site for details.

CALL FOR A FREE BROCHURE

800.211.3983

For information on upcoming auctions, visit our web site at rbauction.com

Page 72 • October 20, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

YOUR NEW DESTINATION FOR PARTS & SERVICE HILLS MACHINERY IS PROUD TO ANNOUNCE THAT WE NOW SELL AND SERVICE CASE CONSTRUCTION EQUIPMENT. This also means we offer quality, original equipment parts and service from qualified technicians who know your Case equipment best. Contact us today see how we can help your business!

Hills Machinery Company offers reliable and trustworthy equipment, rentals, service, and employment in the southeast United States. Hills Machinery Company was founded with a focus on the service side of the business, providing fair and competitive prices for our customers. Our fleet is comprehensive enough to provide the major earthmoving, clearing, compaction, and material handling equipment to supply a project from the beginning to the end. Our service personnel are dedicated and take our customer’s needs personally. If a customer has a problem, we help them solve it correctly and quickly.

Visit us at our NEW CHARLESTON, SC Location!!! 1014 ATLAS WAY COLUMBIA, SC 29209 (888) 830-5939 (803) 658-0200 www.hillsmachinery.com

7168B CROSS COUNTY ROAD N. CHARLESTON, SC 29418 (866) 830-7577 (843) 225-9377 Fax: (843) 225-9378