Southeast 15 2016 by Construction Equipment Guide

Published Nationally ®

Southeast Edition $3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

www.constructionequipmentguide.com

July 20, 2016 • Vol. XXIX • No. 15 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

New Orleans…

$60M Grant to Fund Road Project

Florida Sees Robust Road, Bridge Construction…8

In Columbia, tenn., officials at Columbia state Community College are looking ahead to a second round of construction on a $42.5 million campus, now that crews have put the finishing touches on the master plan’s phase I. “the old Williamson Campus building had reached its capacity of approximately 1,500 students,” said Janet smith, school president. “there was no room to expand in order to accommodate Williamson County’s rapidly growing population base, and we were unable to offer programs there requiring chemistry and physics, “Columbia state is known as an institution that’s student-centered and committed to student success. the design and quality of the facility — the buildings, the classrooms, the grounds —should support students’

nEW orLEAns (Ap) Louisiana is getting a $60 million federal grant that will allow the state to complete a nearly 15-mi. (24 km) pavement replacement and lane addition project between the Interstate 10 and Interstate 49 interchange and the Atchafalaya Basin Bridge. Gov. John Bel Edwards and state transportation secretary shawn Wilson announced the FAstLAnE funding from the U.s. department of transportation. Edwards submitted the application for funding in April. He and Wilson began working on the application during the governor’s transition last year. the entire project is estimated to cost more than $300 million. Edwards and Wilson said the federal government’s investment enables the state to dedicate available funds to advancing other infrastructure projects. “While we are extremely grateful that the federal government is making this investment in Louisiana, this

see COLUMBIA page 66

see GRANT page 28

Brian McCord, RealtyPictures.com photo

The new campus will generate income, support local jobs, sustain a skilled workforce, increase the lifetime income of students and expand the state’s economic base. Loyal Employee Reaches Milestone…12

Second Round of Construction Begins on $42.5M College By Cindy Riley

CEG CorrEspondEnt Tenn. Contractor Increases Efficiency…18

Table of Contents ................4 Truck & Trailer Section ........ ......................................43-47 Recycling Section ........51-65 Attachment & Parts Section ......................................75-81 Business Calendar ............83 Auction Section ............86-93 Advertisers Index ..............94

Panama Canal Puts Pressure on U.S. Ports In 1914, the opening of the panama Canal forever changed the way cargo was shipped throughout the world. In April, the panama Canal Expansion opened after a $5.2 billion, nine-year project and caused major changes in modern maritime trade. the project included the addition of a third set of locks as well as a new access channel to the pacific, and dredging to improve navigational channels. the new

lock allows vessels with up to 14,000 tEUs to pass through, as opposed to the previous maximum of 5,000 tEUs. the canal’s capacity has doubled, allowing more cargo to go through to north America. With the new ease of access to east coast ports, many cities are being forced to update their facilities in terms of both size and technological advancement. the American

Association of port Authorities (ApAA) is anticipating spending $9 billion each year in port renovations. this will be split into three categories: land-side connection in and out of ports, waterside connections and port facility infrastructure. the land-side connections will be expanding road and rail access to the terminals. Water-side connections include deepening and widening see PORTS page 68

Page 2 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GEORGIA Buford 678.318.9500 Saavannah 912.964.8079

SOUTH CA AROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAR CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

NORTH DAK DAK KOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020

Fuel efficiency is the number one thing I look for during a demo. Burning one-third less fuel than the competition —

That’s our Ex Factor. – Stoney Welch, director of HSE, Triple B Services

Williston 701.570.5309

Becoming one of the most successful site prep, excavation, and paving contractors in the state of Texas requires a keen eye on the financials. There’s a reason Stoney has decided to cycle 11 new Volv l o excavators into his fleet over the last two years — they burn a lot less fuel, the financing is predictable and flexible, and they hold their value incredibly well. volvoce.com/ExFactor. Find tips to get the most from your excavator at volvoce.com/ExFactor

ascvolvo.com

Smartt W Smar Works. orks.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 3

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA Nor th Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

You’re serious about getting your bonus. And your crew thanks you.

Our line of pavers and compactors sets the standard for reliable asphalt paving. We have a long h i s to r y o f p r o v e n te c h n o l o g y a n d a r e p u t a t i o n f o r i n d u s t r y - l e a d i n g i n n o v a t i o n . W h e n i t c o m e s to ma ximizing your earnings, these machines deliver.

NORTH CAROLINA A sheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

Track DENSITY IN REAL TIME. PASS:

TEMPERATURE:

250°

D E N S I T Y:

PA S S :

TE M P E RATURE :

220°

DENS I T Y:

95.1%

94.2%

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

PASS:

TEMP ER AT U R E:

270°

DE NSI T Y:

92.6%

Volvo Intelligent Compaction (IC) with Densit y Direct . Volvo has changed the game. Density Direct provides actual density calculations in real time — eliminating guesswork and reducing core sampling. Improve mat quality, do it in less time, get your bonus, and win more contracts with V Vo olvo Density Direct. Learn more at volvoce.com/DensityDirect.

ascvolvo.com

Page 4 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

sOuTheAsT edITIOn

In ThIs Issue

Circulated Throughout

Founder, Publisher & CEO Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Main office

12 18 To r e a d t he s e s t o ri e s a nd ma ny m o re , v is it w w w . co n s t r u ct io ne q uipm e nt g uid e . co m

specIAl secTIOn

36 U.S. SHORING HOSTS MORE THAN 80

51 RECYCLING, CRUSHING AND SCREENING

U.S. Shoring and Equipment Co., Euless, Texas, hosted more than 80 guests for a demonstration of the new Barbco Inc., TriBor and FlexBor drilling systems.

Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

GUESTS FOR DEMO OF DRILLING SYSTEMS

40 TERRAMAC UNVEILS NEW UNIT AT RT14R TOW &

FLORIDA AGAIN SEEING ROBUST ROAD, BRIDGE CONSTRUCTION

The Great Recession that began in 2008 hit every sector of the American economy, but few states were delivered a body blow as hard as the one inflicted on Florida.

12 LOYAL EMPLOYEE OF GREGORY POOLE REACHES MILESTONE Gregory Poole Equipment Company recently celebrated an important milestone for one of the company’s most valuable employees — Johnny Parker. Parker has been a full-time employee of the company for 50 years.

18 TENN. CONTRACTOR INCREASES EFFICIENCY WITH KOMATSU DOZER Knoxville’s Duracap Asphalt Co., one of eastern Tennessee’s top paving contractors, has always been noted for its hard work and the speed with which it gets projects completed for its clients.

24 INDUSTRY VETERAN CLINT BAILEY RETIRES FROM SCOTT EQUIPMENT Clint Bailey, Scott Equipment Company LLC’s (SEC) Memphis area branch manager, retired at the end of May 2016.

32 KCMA CORPORATION NAMES PITTMAN TRACTOR TO REPRESENT KAWASAKI-KCM KCMA Corporation recently announced that Pittman Tractor Company will be representing Kawasaki-KCM wheel loaders in the southern Alabama market, as well as the Florida panhandle.

Web site Editorial e-mail Advertising e-mail

Liebherr’s first crawler tractor in the 77 ton (70 t) category — the PR 776 — is designed for tough mining and quarry operations.

90 JEFF MARTIN AUCTIONEERS ANNOUNCES NEW VICE PRESIDENT Jeff Martin Auctioneers Inc. announced today that Larry Goff has joined the company as vice president of operations and sales.

92 PACIFIC TRI-STAR INTRODUCES CHINA’S SUNWARD TO U.S. MARKET A major heavy equipment manufacturer based in China is looking to expand westward to the United States — with help from a dealer in Utah.

equIpmenT 43 MACK TRUCKS Mack Omnitracs 62 CAT 816K Landfill Compactor 75 VOLVO Application-Specific Buckets

depArTmenTs 83 BUSINESS CALENDAR 84 CLASSIFIEDS 86 COMING AUCTIONS

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

Toll Free Fax e-mail

Kent Hogeboom National Sales Manager 315/866-1423 800/988-1203 315/866-1379 khogeboom@cegltd.com

82 LIEBHERR DESIGNS CRAWLER TRACTOR FOR MINING, QUARRIES

Edwin M. McKeon Sr. Richard C. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

Richard C. McKeon •North & South Carolina•Tennessee •Virginia 704/553-8888 800/288-4234 704/553-8899 rmckeon@cegltd.com

For advertising rates Contact

SHOW TOUR Terramac, a manufacturer of rubber track crawler carriers, recently wrapped up its successful RT14R Tow & Show.

feATures

Toll Free Fax

•Alabama •Arkansas •Florida •Georgia •Louisiana •Mississippi •North Carolina •South Carolina •Tennessee •Virginia •Puerto Rico •Virgin Islands

Contact

Toll Free Fax e-mail Contact

Toll Free Fax e-mail Contact Toll Free Fax e-mail

Mobile

Rich Olivier •Alabama •Arkansas •Georgia •Mississippi •Tennessee •Florida Panhandle 770/443-3174 800/409-1479 770/443-3176 rolivier@cegltd.com Jim Van Natta •Florida •Virgin Islands •Puerto Rico 407/365-5720 800/344-3026 407/366-3192 jvannatta@cegltd.com Dale Agnew •Louisiana 877/877-4997 972/719-2611 dagnew@cegltd.com

Facebook

Twitter

YouTube

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 5

JAMES RIVER EQUIPMENT

WORKSITE PERFORMANCE

PROTECTION AND ABILITY

35 locations serving North Carolina, South Carolina and Virginia!

m Jam esRiv erEquip ment.co

Page 6 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer: ASC Construction Equipment USA A, Inc.

Flagler Construction Equipment, LLC

Augusta, GA 706.793.4726

Davie, FL 954.581.4744

Buford, GA 678.318.9500

Ft. Myers, FL 239.481.8554

Forest Park, a GA 770.319.0074

Jacksonville, FL 904.737.6000

Savannah, GA 912.964.8079

Lake City, FL 386.758.7444

Charlotte, NC 704.494.8100

Miami, FL 305.477.2442

Charlotte, NC 704.596.8283

Orlando, FL 407.850.9614

Garner, NC 919.661.8710

Orlando, FL 407.659.8700

Greenville, NC 252.754.5280

Tampa, FL 813.630.0077

Mills River, NC 828.687.0620 Bismarck, ND 701.250.4882 Fargo, ND 701.271.2360 Minot, ND 701.839.4020 Cayce, SC 803.791.0740 N. Charleston, SC 843.414.1120 Piedmont, SC 864.704.1060 Chattanooga, TN 423.308.7940 Knoxville, TN 865.525.1845

Scott Equipment Companyy, LLC Alexandria, L A 318.448.1647 Baton Rouge, L A 225.293.3683 Broussard, L A 337.837.2907 Lake Charles, L A 337.433.9811 Monroe, L A 318.388.9300 Shreveport, L A 318.226.9171 St. Rose, L A 504.461.0961 Jackson, MS 601.373.4600

Cowin Equipment Company Inc.

Lavergne, TN 615.793.3888

Birmingham, AL 205.841.6666

Memphis, TN 901.547.8008

Madison, AL 256.350.0006 Mobile, AL 251.633.4020 Montgomery, AL 334.262.6642 Oxford, AL 256.832.5053 Pensacola, FL 850.479.3004

Our Volvo E-Series excavator has allowed us to do things that are just plain amazing.

That’s our Ex Factor. – Jim Whitaker, fleet manager, Whitaker Construction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 7

Whitaker Construction has more than 60 years’ experience in underground construction. As one of the largest utility contractors in their region, region, they ha av ave to operate with a cutting edge. Jim says the EC380E gives them that edge — working up to a 480 class size, while fitting in tighter spaces — allowing them to tackle ckle challenging jobs with more efficiency. Find tips to get the most from your exca avvator at vvolvoce.com/ExFactor olvoce.com/ExFactor.

Page 8 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Florida Again Seeing Robust Road, Bridge Construction while driving from tallahassee to tampa. “With no income tax in Florida, we are highly dependent on sales tax, which means when the economy heads south and people don’t come down here, we suffer. the Great recession that began in 2008 hit every sector “our sales-tax collections are back up and we have a govof the American economy, but few states were delivered a ernor who, since 2010, has adopted the theme of ‘jobs, jobs, body blow as hard as the one inflicted on Florida. jobs.’ We have added a lot of new work and he is a really Because of its tropical climate and the most beachfront strong advocate of infrastructure spending, so not only has and coastline in the continental United states, the sunshine highway construction benefited, but airport and seaport constate has always been heavily dependent on tourism for its struction as well.” revenue. In addition, people migrate to the state from all over one look on the Florida department of transportation’s north and south America to live and work, a major driver (Fdot) website confirms that construction activity is curbehind Florida’s historically robust real estate industry. rently on fire in the state as there are approximately 1,200 so when the recession exploded the housing bubble in active contracts underway this summer. Florida’s most desirable communities, while also discouragscott appointed Jim Boxold to serve as Florida’s secretary ing the normal flocks of tourists from visiting its beaches and of transportation in december 2014 to upgrade the transtheme parks, the sunshine state was draped in one big, dark portation system and help find funding solutions for it. cloud. Boxold said that number of active building contracts is a What all that meant for the construction industry wassbig increase from the previous several years cores of delayed or cancelled projects. when the recession had Florida in an iron thousands of jobs were lost and the money grip. to pay for building projects largely dried up. “I think that you can go back to two or three dot secretaries before me and see A Near-Miraculous Recovery they were actually pushing out and delaying Almost eight years later, though, the state many, many projects,” he said. “I would say is in the middle of an economic comeback that about 1,200 active projects is about that many observers see as something just right, but there are 5,000 to 6,000 different short of miraculous. things that we are working on developing.” one of the architects of that comeback is the result of all this is that now, as the republican Gov. rick scott, a former busistate is welcoming its annual huge influx of nessman who came into office in 2010 with vacationers, vehicle drivers in particular cana promise to run the state like a business, not fail to notice all the road and bridge work while cutting taxes to encourage business going on. development. In addition, he has increased Although there are a few very-high-profunding for education, health care and the file highway projects happening in the urban transportation infrastructure, while promiscenters of Florida, with the biggest being the ing to add 700,000 new jobs in seven years. $2.32 billion I-4 Ultimate in orlando, the fact that the governor is attempting all Burleson said that road and bridge work can of this in a state without an income tax is be found in all parts of the state from Miami being scrutinized closely not only by Florida FDOT photo northwest to tampa and pensacola (where a residents, but by national policy makers and The dirt from the mound is being placed in a nearby field on the $2.32 billion I-4 $500 million bridge job is preparing to bid), Ultimate in Orlando. government leaders as well. see FLORIDA page 70

By Eric Olson

CEG CorrEspondEnt

Construction Industry Rebounds While the fine points of scott’s initiatives are fiercely debated between sunshine state liberals and conservatives, there is no question that transportation needs are getting a large share of attention from tallahassee. to illustrate that, the governor’s 2016 to 17 state budget includes almost $10 billion to improve or build airports and seaports, with the vast majority of the spending set aside for roads and bridges. More than $3 billion is for new construction. Bob Burleson, the president of the Florida transportation Builders Association, which works as a liaison between the state and the construction industry, characterizes road building in the state in 2016 to be in “terrific shape”, which he added was obviously due in large measure to the rebound in the state’s economy. “our contract volume is as much as it has ever been and I think that is even adjusting for inflation,” he said recently

Global Five rendering

FDOT photo

Crews work on the $2.32 billion I-4 Ultimate in Orlando.

A rendering of the completed I-4 Ultimate.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 9

Effectively simple • Efficient—Large hoppers collect more debris to reduce downtime for offloading • Durable—Exclusive 3 shaft elevator eases chain wear and removal of chain links by up to 50% • Productive—Large 42" gutter brooms are spring balanced and apply the right amount of pressure on any surface

Call the location nearest you today! When you need us, where you need us Tampa

Tallahassee

Jacksonville

Orlando

Fort Myers

Pompano Beach

Equipment • Parts • Service

www.gsequipment.com

Page 10 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

I am . . .

ALLEN MORELOCK / KOMATSU MASTER TECHNICIAN / KINGSPORT “Power Equipment has been a “family name” for as long as I can remember. I started with Power Equipment as a helper more than 31 years ago and I guess you could say I’ve grown up in the business, along with other members of my family who have or still do work for Power. A lot has changed over the years, especially in how the machines operate and how they are repaired. Technological advances have created machines that are more efficient and that means technological advances in the way they are repaired. I never thought I would “go back to school” to learn how to repair a machine but it has turned out to be something I enjoy doing and am pleased that I am now a Komatsu Master Technician and that makes me “Power Strong”.

KNOXVILLE 3300 ALCOA HWY. KNOXVILLE, TN 865.577.5563

www.powerequipco.com

NASHVILLE CHATTANOOGA 1290 BRIDGESTONE PKWY. 4295 BONNY OAKS DRIVE LAVERGNE, TN CHATTANOOGA, TN 615.213.0900 423.894.1870

SALTILLO [TUPELO] MS 1545 HIGHWAY 45 SALTILLO, MS 662.869.0283 KINGSPORT MEMPHIS 1487 ROCK SPRINGS ROAD 3050 FERRELL PARK COVE KINGSPORT, TN MEMPHIS, TN 423.349.6111 901.346.9800

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 11

May Heavy Equipment Get More Done

866-629-3784 Columbia, SC, Charleston, SC, Lexington, NC, Raleigh, NC

At May Heavy Equipment, we’ re devoted to helping you get more done. By providing the tools needed for construction, mining and more since 1997, we’ ve grown to become the Southeast’ s reliable source for heavy equipment rentals, sales, parts and service.

866-629-3784 Columbia, SC, Charleston, SC, Lexington, NC

Page 12 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Loyal Employee of Gregory Poole Reaches Milestone

regory Poole Equipment Company recently celebrated an important milestone for one of the company’s most valuable employees — Johnny Parker. Parker has been a full-time employee of the company for 50 years. He started with the company in 1966, in a trainee position, as part of the company’s apprentice program, earning $1.50 an hour. After graduating from Gregory Poole’s first apprentice program, Parker served the company as a technician in various capacities for 19 years, and then moved into a management role. “In today’s world, 19 years is a long time for someone to work for the same company, and he did that as a technician for us,” said Damon Magee, product support sales manager of Gregory Poole in Raleigh. “He served as a technician for what some would consider a full career before he went into management.” His first role in management was the squad leader and supervisor of the company’s rebuild center in Raleigh. He served in that position for a few years before taking over as Greg Poole III (L) welcomes B.G. Jennings, recent (L-R) are Greg Poole III, Johnny Parker and Damon Magee. the parts manager of the Fayetteville, N.C., facility, and then retiree of Barnhill Contracting in Rocky Mount, N.C. as the parts and service manager. He then transitioned to fulltime service/branch manager, and held that position for 22 years. “In January of this year we had a need and a new position that fit him — product support representative for us here supporting the Fayetteville branch,” said Magee. Gregory Poole Equipment Company specializes in product support and supporting its customers, so it makes sense that one of its top employees will be working as a product support representative. It’s another example of how company uses its resources to ensure prompt and effective customer service. “We have more than 200 technicians in the construction division alone in eastern North Carolina. It’s been a great, great asset for us and for our customers. Take for example this facility in Fayetteville — back in the downturn, this facility was one of our busiest, and we were able to move some of those resources from other branches down to work at this facility through those years. We were able to hold on see POOLE page 38

Johnny and Winkey Parker stand with their family.

Guests line up for a fully catered lunch consisting of baked chicken, mac and cheese, green beans, banana pudding and chocolate layer cake.

(L-R): Damon Magee and Greg Poole III present Johnny Parker with a 500-lb. Liberty gun safe in appreciation of his 50 years of loyal and dedicated service to the company.

Richard Akers, director of public works of Fort Bragg, takes a break from his duties to spend the day at the event.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 13

! !

/3).+%,2 )/3)$"2)-, 0"#2-01 -,20"#2-0 22"#(+%,21 %,2"* 0-'0"+ %"1% 0-'0"+ ),",#% 0-'0"+

AG SUPERSTORE QUALITY PRE-OWNED EQUIPMENT

$$)% *"42-, %#*"42-, &*),2%/3).#- #-+

Page 14 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 15

Introducing the GP3, the World’s Most Intelligent Paver Announcing Our New Distributor in Arizona

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347

ARROW EQUIPMENT

BLANCHARD MACHINERY

GREGORY POOLE

Serving Western North Carolina (800) 277-2080 CarolinaCat.com

Serving South Carolina (844) BLANCHARD (252-6242) BlanchardMachinery.com

Serving Eastern North Carolina (800) 447-3112 GregoryPoole.com

Page 16 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

(252-6242)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 17

Page 18 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tenn. Contractor Increases Efficiency With Komatsu Dozer By Eric Olson CEG CorrEspondEnt

Knoxville’s duracap Asphalt Co., one of eastern tennessee’s top paving contractors, has always been noted for its hard work and the speed with which it gets projects completed for its clients. But when it wanted to increase its efficiency and accuracy even more in its grading work, it brought in the professionals with another trusted name in the Volunteer state. duracap turned to Knoxville-based power Equipment Company to help it identify a bulldozer that would make its grading work much more accurate. For years, the companies have worked well together and have kept up a long and prosperous friendship.

two to grade dirt on a project to its exact specifications, but once the 217-hp (162 kW) d65EXi showed duracap what it could accomplish with only one grade, the new machine was a must-have. Earlier this spring, duracap worked on a large series of apartment complexes in the Knoxville area where it needed to move approximately 60,000 yds. (54,864 m) of dirt. Guyton said that having the Komatsu d65EXi was a definite time-saver for his crew. “oh yeah, it improves the work tremendously in that we don’t have to have layout and staking, with a guy running out there

giving us four corners and all that,” he continued. Two Expertly Run Companies the new d65EXi dozer is one of several Komatsu machines in the duracap yard, which includes pC300, pC228 and pC200 excavators. Each was obtained through power Equipment. Guyton said that his company has always been extremely satisfied with the service it has gotten through power Equipment, which also serves customers throughout tennessee. Besides Knoxville, branch locations can be found in Chattanooga, Kingsport, nashville,

Memphis and tupelo, Miss. duracap has been in operation since 1960 and offers a full array of site services that include asphalt paving, curbing, grading and utilities. Additionally, the firm maintains hotmix asphalt plants and can provide recycled aggregates for a particular project. the number of jobs that duracap has done in the area over six decades is seemingly endless. roads, parking lots, municipal buildings, schools, churches, shopping centers and industrial and office parks have all been built due to the site work done by duracap. Guyton points to the company culture of

A Quick, Precise Grader As a result, duracap decided to get a Komatsu d65EXi dozer, in large measure because of the Gps technology that it employs to do quick, precise grading. “We demoed it with power Equipment and immediately saw that it was a much better way of moving dirt quickly and not have to repeat steps in order to do it,” said Camden Guyton, grading superintendent of duracap Asphalt. “We had not really been interested in Gps until we used the Komatsu d65EXi, but once we did, it was a no brainer after that.” He added that it would often take a time or

(L-R) are Cody Smith and Camden Guyton, both of Duracap Asphalt Paving Contractors, and Chase Milam, Power Equipment Company.

getting the job done quickly and efficiently, no matter how many long hours have to be put in to do it, as being a key element in duracap’s historic success. on a more personal level, Guyton characterized his job there as really being part of a family. “I began working here when I was 16 years old,” he remembered. “It is just a tightly-knit company and everybody is real close.” duracap Asphalt is located at 2535 Asbury road in Knoxville, tenn. For more information, visit www.duracapasphaltpaving.com and http://www.powerequip.com/. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) (L-R) are Joe Guyton, Cody Smith and Camden Guyton, all of Duracap Asphalt Paving Contractors.

CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 19

TRIFECTA OF TRENCHLESS TECHNOLOGY

SPECIFICATIONS SPECIFICA CA ATIONS OPERATOR CONTROLS OPERATING SYSTEM TYPE ELECTRICAL SYSTEM HORSE POWER ROTARY HYDRAULIC PUMP MAX ROTARY TORQUE

WIRELESS REMOTE DOCKABLE

TOTAL MACHINE MICRO PROCESSOR CONTROL

12VDC WITH CAN COMMUNICATION

200 HP

250 HP

400 HP

HYDROSTATIC90 SER/130CC, 6000 PSI

HYDROSTATIC(X2) 90 SER/130CC, 5750 PSI

HYDROSTATICSER/130CC, X2

33,741 FT/LBS

60,056 FT/LBS

80,620 FT/LBS

100 RPM, 3 SPEED

84 RPM, 3 SPEED

OPEN LOOP45 SER/100CC, 5000PSI

OPEN LOOP45 SER/130CC, 5000 PSI

OPEN LOOP45 SER/130CC, X2

CYLINDER THRUST FORCE (FWD)

282,743 LBS

500,142 LBS

737,961 LBS

CYLINDER PULL BACK FORCE (REV)

186,532 LBS

375,107 LBS

592,191 LBS

FWD 20.3 FPM REV 30 FPM

FWD 14.2 FPM REV 18.9 FPM

FWD 11.2 FPM REV 14 FPM

MAX ROTARY SPEED THRUST HYDRAULIC PUMP

HORIZONTAL DIRECTIONAL DRILLING AUGER BORING MACHINE GUIDED BORING MACHINE

MAX CYLINDER THRUST SPEED RACK AND PINION THRUST FORCE MAX RACK AND PINION THRUST SPEED BREAKOUT GRIP RANGE BREAKOUT TORQUE

31,104 LBS

60,209 LBS

122,262 LBS

90 FPM INFINITELY VARIABLE

67 FPM INFINITELY VARIABLE

60 FPM INFINITELY VARIABLE

3" TO 7"

4" TO 8"

5" TO 14"

70,000 FT/LBS

114,733 FT/LBS

160,000 FT/LBS

DRILLING FLUID GPM

9 GPM

20 GPM

DRILLING FLUID PSI

750 PSI

1000 PSI

1300 PSI

300 GALLON

300 OR 500 GALLON

9" PROP

6-1/4" MALE SPLINE WITH 3-1/2” IF API

7-7/8" MALE SPLINE WITH 4-1/2” IF API

7-7/8" MALE SPLINE WITH 6-5/8” FH API

MIXING TANK CAPACITY MIXER TYPE SPINDLE INFO SPINDLE ID

2.25"

3.25"

FUEL TANK CAPACITY

100 GALLON

150 GALLON

200 GALLON

HYDRAULIC TANK CAPACITY

175 GALLON

250 GALLON

300 GALLON

DISTRIBUTED BY

1-800-448-8934 • sales@barbco.com Barbco Inc. 315 Pekin Dr. SE • East Canton, OH 44730-9462

MADE IN USA

U.S. Shoring & Equipment Co. ANNOUNCES The All New PitBoss CommandAir30! TRIFECTA OF TRENCHLESS TECHNOLOGY

QuickAttach Attach Adapters Quick Adapters and and Volume Spindle HighHigh Volume Spindle

Robust HoldDowns Downs RobustAdjustable Adjustable Hold

Extendable, Quick Quick Alignment Extendable, Precision Track Alignment Precision Track

3 Modesofof Operation Operation 3 Modes

Dockable, Wireless Remote Dockable, Wireless Remote

The PitGuard & PitBridge are Product Lines of PitBoss And Boast New Aspects of Pit Protection Centerline Jacking Centerline Jacking System System

817-858-0975

usshoringandequipment.com

Page 20 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BRANDYWINE TRUCKS AND EQUIPMENT WE BUY EQUIPMENT!

(301) 372-0083 Shipping & Containerization Available

WE BUY TRUCKS!

WWW.BRANDYWINE-EQP.COM Low Hours New Witzco Lowboys, Customization Available, 3000 Hrs, 35-50 Ton in Stock ......................................................$Call

(2) Available

(6) Available

1988 Champion 710A, EROPS, Scarifier, 12’ Moldboard, Cummins Engine, A/C & Heat ....................................$21,900 Ea.

2012 Volvo EC250D LR, 4624 Hrs, 60’ Reach, 60” Bkt, A/C & Heat, Tier 4, Stock# 719H ..........................$165,000

1998 Cat 963B, EROPS, 98” Bucket, Good U/C, Strong Runner! Stock# 579l ..................................................$27,500

2012 Cat 320EL, 3000 Hrs, Mechanical Thumb, New Chains & Sprockets, Rear Camera, Medium Stick, Stock# 320El .. ................................................$129,900

2013 Deere 450J LGP, 1027 Hrs, OROPS, Factory Warranty Avail., Like New!..........................................$83,500

2007 John Deere 644J, OROPS, 11,500 Hrs, Hyd Q/C, Located in Tampa, FL, Stock# 578l ..............................$58,500

2012 Cat 312EL, Mechanical Thumb, Tier 4, Stock# 749H ........................$124,500

2004 Cat 963C, EROPS w/AC, 8900 Hrs, Nice Machine! Stk #212l ....$72,500

2006 Cat 345C LME, 14,058 Hrs, 72” Bkt, Counterweight Removal Device, 152I..........................................$105,000

CAT CP563, S/N CNT00635 ................................................$66,250 CAT CP563C, S/N 5KN00120 ..............................................$49,500 CAT 953C, S/N 2ZN02093....................................................$42,000 CAT 953C, S/N 2ZN03127....................................................$52,000 CAT 953C, S/N BBX02880....................................................$79,500 CAT D4G, S/N TLX01103 ....................................................$42,500 CAT D5, S/N 96J00825 ........................................................$18,500 CAT D6H, S/N 3ZF00827......................................................$35,000 KOMATSU D41P-6, S/N B40102 ........................................$39,500 CAT 315CL, S/N CJC00868 ................................................ $49,000 CAT 320CL, S/N PAB07076..................................................$68,500 CAT 320CL, S/N PAB07195..................................................$67,500 KOMATSU PC55, S/N 15203................................................$35,000 CAT 12H, S/N 4XM00903 ....................................................$82,500 CAT 420D, S/N FDP04701....................................................$29,000 CAT 725, S/N B1L00360 ......................................................$89,500 CAT 730, S/N B1M00436 ....................................................$92,500 VOLVO A25D, S/N 11933 ....................................................$67,500 SAKAI SV400T, S/N 30162 ..................................................$45,000 CAT 257B, S/N SLK09683....................................................$25,000

2014 Low Hour Bomag BW213D-4, EROPS, 84” Drum, High/Low Frequency, 23.1x26 Rubber................$109,500 Ea.

(2) 2011 Cat 336DL, Both under 4,500 Hrs, Aux Hyd, Hyd Q/C, SBG Pads, Straight Travel, 12’10” & 10’8” Stick, Work Ready! ....................$195,000 Ea.

THE IRONPEDDLERS 704-289-8591 • 800-438-1933 www.ironpeddlers.com

CAT 953C, S/N 2ZN03127 $52,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 21

We Are

The ALL Family of Companies boasts new yards and a constantly updated fleet. But folks don’t choose ALL for what’s new. They choose us for what is the same. Our success is the experience and the work ethic our team brings to every job. This is what makes us unique. It’s what makes us ALL.

800-232-4100 www.allcrane.com

C R A N E R E N TA L

SALES

ALL

SERVICE

PA R T S

Page 22 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW UNUSED EXCAVATORS

SOLD

2007 KOMATSU D65PX-15EO, 4843 HRS, 70% 2006 VOLVO EC160BLC, 2349 HRS 36" BUCKET 2002 KOMATSU PC200LC-7, 8900 HRS, 36” GP U/C, CAB, A/C, MULTI SHANK RIPPER, EXCEL- HYD. THUMB VERY GOOD CONDITION $65,000 BKT 50% PLUS U/C, GOOD CONDITION. ............ LENT CONDITION ................................................ ..............................................................$39,900 ............$89,500 OR $85,000 WITH OUT RIPPER

ADDITIONAL EQUIPMENT

COMPLETE SET OF BLS TUF PADS, PART # SF350 FOR CAT D4KXL 85 TO 95% WEAR REMAINING ........................................................ ..............NEW COST $9,000; BLOW OUT $4,000

1978 CAT 120G, REBUILT ENGINE, NEW PAINT, 50% RUBBER, GOOD COND ..................$29,500 Just Reduced!

$79,500

Guy Roof 2091 Bishop Rd. • Greensboro, NC 27406

336-382-9715 cecarolinasinc@aol.com

Have Pumps, Will Travel

Easy 3rd party financing with great rates for 12-48 months

PRICE REDUCED!

$55,000

$90,000

MA21464

2003 CA AT T 318C 7572 HRS S/N MDY00160

EEXCAVATORS XCA V A TORS

WHEEL LOADERS

Customer Service 1-800-451-0769 www.hollandpump.com

MA16230

2012 CASE 821F 2745 HRS S/N / NBF213226

VVisit isit ButlerIRON.com Butler IRON .com NO RT H D A KO TTA A | | SO U T H D A KO TTA A

2012 CA ATT 308E 2746 2746 HRS

S/N ALLY01679 Y01679

2012 CA ATT 316E DZW00617 MA19759 ............................... $161,500 2012 CA ATT 316EL DZW00300 MA21783 ............................ $157,500 2014 CA ATT 305E XFFA04058 MA22537................................... $70,000 2015 CA ATT 311F RR KCW00234 MA20528 ................................ $150,000

$137,500

MA22084

2005 CA AT T D6N LGP 6402 HRS

2012 CA ATT 950K R4A00487 MB21002 .................................. $175,000 2015 CA AT T 924K PWR04385 MA22022 .................................. $140,000 1996 CA ATT 938F 1KM01738 MA22146 ......................................... $33,000 2012 CA ATT 938K SWL00371 MA21618 ................................... $157,500 2008 KOMA ATSU WA250 A76034 MA20303 ................ $83,500 1994 CA ATT 936F 8AJ01435 MC21543................................ $32,000 2010 DEERE 544K 631818 MA20811.................................. $126,500

Ft. Myers, Jacksonville, Pensacola, Orlando, Tampa, Walterboro, West Palm Beach

$81,000

MA13913

2008 2010 1998 2004

S/N GBJ00612

TRACK T RACK TY TYPE PE TTRACTORS RACTORS

MOTOR GRADERS

2001 CA AT 143H AWD 1AL00879 MK003555....................... $69,000 2009 CA AT 140M B9D01941 MA21112 ................................ $120,000 2005 CA AT 140H APM02461 MA16794 ................................ $115,000 1996 CA AT T 140H 2ZK01480 MB16759 .................................. $76,500 2009 CA AT 140M AWD W B9G00160 MA20714 ............. $130,000 2009 DEERE 770G 625360 MA21115 ......................... $115,000 2007 DEERE 772D 615464 MB13626.................................. $95,000

$92,500

$32,000

MA22539

MC21543

2001 CA AT T 140H

1994 CA AT T 936F

S/N / 2ZK06048

CA CAT T D6T XW DJG00324 MA21470 ........................... $154,500 CA AT T D7E MDB00151 MA16776 ................................ $289,000 CA AT T D6R LGP 9PN00794 MA07617 ........................ $57,500 KOMA ATSU TSU D155AX 76067 MA19713 ................. $99,500

Holland Pump manufactures, sells, rents, repairs Holland Pump manufactures, sells, of rents, repairs and services pumps for a wide range applications and services pumps for a wide range of applications with capacities from 500-150,000 GPM. with capacities from 500-150,000 GPM.

QUALITY Q UALIT Y USED EQUIPMENT E Q UIPMENT

Finish Faster Faster with with Finish Holland Pump! Pump! Holland

Free Delivery within 200 Miles!

2015 NEW UNUSED SANY SY135C, AUX. HYD. BLADE, ISUZU DIESEL. IN STOCK FOR IMMEDIATE DELIVERY........................................$89,500

2006 Cat 315CL, 8892 HRS 36" CAT BKT & CAT 2008 VOLVO EC210CL, 7750 HRS, 60% PLUS PROGRESSIVE LINK HYD. THUMB 50% PLUS U/C VERY DRY & TIGHT VERY GOOD COND .... U/C, 48” BKT, PROGRESSIVE LINK, HYD. ................................................................$59,900 THUMB, VERY GOOD COND ..................$69,900

S/ 8AJ01435 S/N

Call Bill Bauer or Austin Calavera at 888.344.2973 E X P E R I E N C E T HE BUT L E R DI F F E R E N C E

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ July 20, 2016 â€˘ Page 23

704-888-1114 â€˘ Fax: 704-888-2377 NOW RENTING EQUIPMENT IN THE CHARLOTTE, NC METRO AREA 1334 Hwy 24/27 Midland, North Carolina sales@wilcoxtractor.com â€˘ www.wilcoxtractor.com

AGGREGATE EQUIPMENT-SCREEN 2016 GATOR RMS620X3, "UNUSED" 6' X 20' 3 DECK SCREEN WITH WATER SYSTEM, Stock Number: 5249 ......$19,500 2000 MULTITEK 605B, Portable 5â€™x6â€™ trammel, JD Diesel, Folding Discharge Conveyors, Good Running Condition$39,500 2000 SCREEN USA HM35D2, Portable Screen w/hopper, grissly, shaker screen & Discharge conveyor, JD Diesel Power, portable................................................................................................................................................................................$22,900 COMPACTORS 1996 CAT CS-563C, 84â€? Vib Smooth Drum, Good Tires, ROPS ....................................................................................$33,900 2007 I-R SD116DX, EROPS Cab with AC, 84â€? smooth drum, Good tires......................................................................$44,900 LOADERS 2007 CAT 966H, EROPS, QC GP Bkt w/Teeth, QC Forks, RC, 26.5x25 ........................................................................$107,500 2005 DEERE 655C II, AC, EROPS, 22â€? Shoes, GP Bkt, w/teeth, excellent U/C, Original Paint, Tight as a drum Stk# 3297 .... ..............................................................................................................................................................................................$36,500 DOZERS 2005 CAT D6N XL, 5077 Hrs, EROPS, AC, Pat Blade, Very Good Condition ................................................................$69,500 2005 CAT D6N XL, 10078 Hrs, EROPS, AC, Pat Blade, Very Good Condition ..............................................................$59,500 2006 CAT D9T, EROPS, SU/Tilt Blade, Excellent U/C, Rear C/W, Low Hrs ..................................................................$235,000 2000 CAT D8R, EROPS, Winch, VG U/C, 8U/Tilt............................................................................................................$117,500 2006 KOMATSU D65EX-15, EROPS, AC, 3 Tyne Ripper, SU Tilt Blade, Excellent U/C, blade face and cutting edges are excellent, very good running machine ..............................................................................................................................$63,500 EXCAVATORS 2007 BOBCAT 442D, EROPS, AC, Dozer Blade, Axillary Hydraulics, low hours, excellent condition ..........................$38,500 1993 CASE 9010, 28â€? TGP, 30â€? Bucket, good clean, straight machine, runs & operates well ....................................$26,500 2011 CAT 308D CR, AC CAB, AUXILLARY HYDRAULICS, DOZER BLADE, RUBBER TRACKS, EXCELLENT CONDITION! Hours: 2,469, Stock Number: 3304 ..................................................................................................................................$49,500 2011 CAT 308D CR, EROPS, AC, Aux Hyd, 18â€? TGP, 28â€? GP, mint condition, Hyd. Thumbs available at extra cost, 2,389 hrs ..............................................................................................................................................................................................$49,500 2011 CAT 308D CR, EROPS, AC, Aux Hyd, 18â€? TGP, 28â€? GP, mint condition, Hyd. Thumbs available at extra cost, 2,123 hrs ..............................................................................................................................................................................................$49,500 2008 CAT 312CL, 10â€™ Stick, Aux Hyd, 32â€? TGP, 24â€? GP BKT, AC Cab, Boom/Dipper, Check Valves, Excellent U/C, Super clean & tight machine, Stk#3275 ......................................................................................................................................$50,900 2003 CAT 330 CL, very nice, 12â€?8â€?Stick, 34â€? TGP, tight turntable, excellent U/C, no oil leaks, strong running machine, Stk# 3222 ....................................................................................................................................................................................$59,500 2010 DEERE 160D LC, AC, Aux. Hyd., 3-24â€? TGO, 36â€? GP Bkt, very tight, strong running machine ..........................$59,500 2013 DEERE 160G LC, AC, Aux Hyd., 36â€? GP BKT., pattern changer, tight turntable, strong pumps, excellent running condition ......................................................................................................................................................................................$64,500 2012 DEERE 200D LC, HYDRAULIC THUMB, PATTERN CHANGER, AC, 32" TGP, 45" GP, EXCELLENT APPEARANCE, VERY STRONG RUNNING MACHINE, Hours: 5,711, Stock Number: 3295..............................................................................$74,500 2011 DEERE 200D LC, AUXILLARY HYDRAULICS, PATTERN CHANGER, AC, 45" GP W TEETH 32" TGP, SUPER STRAIGHT, EXCELLENT APPEARANCE, EXCELLENT CONDITION! Hours: 4,950, Stock Number: 3296....................$72,500 2005 DEERE 330C LC, 54â€? GP Bkt w/QA, Tight Turntable, VG U/C ................................................................................$49,500

2002 HITACHI EX160 LC-5, 10'2" STICK, QUICK ATTACH 28" GP W/TEETH, 24' TGP, VERY GOOD RUNNING MACHINE, Stock Number: 3299 ..........................................................................................................................................................$39,500 2007 KOMATSU PC78US-6, EROPS, AC, Dozer Blade, 18â€? Rubber Tracks, super clean machine..............................$36,500 2007 KOMATSU PC78US-6, EROPS, AC, Dozer Blade, 18â€? Rubber Track, Super clean machine, Stk# 3315............$38,500 2007 KOMATSU PC138US LC-8, EROPS,AC, Dozer Blade, Aux, Hyd., 28â€? TGP, reverse camera, excellent condition$48,500 2004 KOMATSU PC160LC-7, Aux. Hyd., 24â€? TGP, Quick Attach 42â€? GP Bkt, very good U/C, tight turntable, very good appearance, very good operating machine........................................................................................................................$43,500 2005 LINK-BELT 135LX, EROPS, AC, Dozer Blade, Aux. Hyd., 24â€? TGP, low hours, clean machine ..........................$54,500 FORKLIFTS / LIFTS / OTHER 1999 Case 585E, low hours, sideshift, 3 stage mast, good running condition, Stk#3317............................................$15,900 1999 GENIE S40, 4x4, 40â€™ 2 section boom, Duetz Diesel, power to platform, Hydraulic rotation, excellent working machine ..............................................................................................................................................................................................$13,900 2008 GEHL DL12H40, 12,000# 40â€™ Lift, Hyd. Leveling....................................................................................................$33,500 2003 I-R RT706H, 3394 Hrs, 6000Lb ..............................................................................................................................$15,900 2006 JLG 1930ES, 500, 19â€™ lift height, 25â€™ work height, excellent condition, 2 available................................................$4,900 2005 TEREX AL4060D-4MH, portable diesel 4 light plant/generator, very good condition ............................................$3,500 GRADERS 2004 CAT 14H, West Coast Location, Front Push Block, 16â€™ MB, 20.5x25..................................................................$135,000 2002 CAT 14H, West Coast Location, Front Push Block, 14â€™ MB, 20.5x25..................................................................$127,500 OFF HIGHWAY TRUCKS 2003 CAT 725, Retarder, AC, Tailgate, Very Good Tires ..................................................................................................$69,500 2007 CAT 730, A/C, Retarder, Excellent 750/65R25 Tires, Super Clean ......................................................................$109,501 2006 CAT 730, C11 Eng, 319 HP, Retarder, VG Tires, Excellent....................................................................................$109,500 1999 CAT D25D, VERY STRAIGHT, EXCELLENT 26.5X25 TIRES, EXCELLENT APPEARANCE, VERY GOOD OPERATING MACHINE, Stock Number: 3288........................................................................................................................................$36,500 2000 CAT D250E, AC, Retarder, Very Good Tires ............................................................................................................$46,500 2002 DEERE 250D, AC, Retarder, Tailgate, Super Clean, 23.5Rx25................................................................................$78,500 2005 DEERE 300D, Tailgate, AC Cab, very good 23.5R25 Tires, Retarder, super clean truck, Stk#3274 ....................$78,500 GENSETS / SKID LOADERS 2013 HI-POWER 310 KVA, JD Diesel, Insulated Cabin....................................................................................................$59,500 2011 HI-POWER 50KVA, 120/480V 3 Phase, Sound Suppression ................................................................................$17,900 SKID STEERS-TRACK 2006 BOBCAT T190, CAB W AC, AUXILLARY HYDRAULICS, 90% RUBBER TRACKS, GOOD RUNNING MACHINE! Hours: 3,077, Horse Power: 66, Operating Capacity: 1,900 lb ....................................................................................................$24,900 2013 CAT 257B3, LOW HOURS, COMES WITH NEW GP BUCKET, EXCELLENT LIKE NEW CONDITION!! Hours: 770, Horse Power: 71, Stock Number: 3292 ............................................................................................................................$31,900

We Specialize in Quality One Owner & Late Model Machines! REDUCED PRICE

2011 Komatsu WA250-6 6325 Hrs, ROPS, JRB Q/C with Bucket, Cold A/C

$78,900

2004 Peterbilt 379 Cat C15 Engine, 10 Spd Transmission, 40K Rears, 12L Fronts, 11R24.5, Jake Brake, Wet Kit.

$43,900

ntoo Sa Savings avvings in Shift Shiff t IInto

KUBOTA KUBO TA A SALES EVENT EV

2013 Genie S45 165 Hrs, Deutz Engine. 4WD, Like New Lift. Ready To Work!

$59,900

2005 Sterling Acterra Call Jeremy for Service & Brian for Parts.

704-233-4242 800-443-7569

Loaded Down and Ready to work! Cold A/C, Air Brake, Stellar 9620A Crane 8600lbs. 20â€™ reach, Knapheide Service Bed, Miller Bobcat 250 welder, 115 hrs, Hyd. Outriggers, Hyd. Air Compressor w/Hose Reel

$39,900 Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm

3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com

2006 GMC Topkick C5500 Duramax, Allison Auto. Trans, 6,000 lbs. Crane, with Wireless Remote, Hyd. Air Comp., Hyd. Outriggers, Good Rubber, Work Ready!

$29,900

Low Rate Financing Available. Call us for details.

GRZQ $ 3 5 ÂżQDQFLQJ IRRU XS WR PRQWKV RQ SXUFKDVHV RI QHZ .XERWD 69/ 6HULHV HTXLSPHQW LV DYDLODEOH WR TXDOLÂżHG SXUFKDVHUV IURP SDUWLFLSDWLQJ GHDOHUVÂś LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU ÂżQDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH ÂżQDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIIHHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ IHU H[SLUHV 6HH XV IRRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIH IRU PRUH LQIRRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ

www.kubota.com

kubota.com

ÂŠ Kubota Trractor Corporation, 2016

www.interstateeq.com N. Seymour Dr., Thomson, GA 30824

(706) 595-1550

Page 24 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Veteran Clint Bailey Retires From Scott Equipment Zac Helms Steps Up After Participating in Training Program

Clint Bailey, Scott Equipment Company LLC’s (SEC) within a SEC store. Once he demonstrated a high level of tomer gets the best service and the best product that we can Memphis area branch manager, retired at the end of May competency in each department, Zac was given the opportu- possibly provide, and the rest takes care of itself. 2016. Zac Helms formerly the branch manager of SEC’s nity to manage and turn around two underperforming stores “I’m looking forward to getting to know the customers stores located in Springdale and Fort Smith, Ark, has stepped in Fort Smith and Springdale, Ark. With guidance from his better in this area. I’m just really excited to be here and to in to grow SEC’s presence in the Memphis market. Division Manager, Jeremy Daniel, Helms managed to turn have the opportunity to step into running an already successBailey was a veteran of the equipment business. His around the operations at these two stores and maximize their ful store.” career began in 1975 when he was hired by Stribling- potential. The two Arkansas stores formerly run by Helms Jeremy Daniel, Senior Vice President, Division Manager Clements, the Caterpillar dealer of north central Mississippi. are in great shape and will continue to grow under the lead- of Scott Equipment based in Monroe, La., said the In the 1980’s Thompson Machinery purchased Stribling- ership of their new branch manager, John Barnes. Management Trainee Program at SEC is directly managed Clements and Bailey was transferred to work in the When reflecting on his first few years with SEC and his and supervised by the executive management team. Memphis location. In 1990, Bailey left Stribling-Clements new opportunity in Memphis, Helms stated, “I found Scott According to Daniel, Scott Cummins, the President of SEC, to become the manager of Davidson Equipment, the Equipment at a career fair at LSU,” Helms said. “I went to was the driving force behind the establishment of the trainee Memphis Volvo dealer. program. Cummins’ goal Soon after arriving at was to prepare SEC for the Davidson Equipment, the future while maintaining the company became part of ideals established by his L.B. Smith. In 2004, LB grandfather and company Smith was purchased by founder, Thomas Scott. The Scott Equipment. best method to insure excelPrior to his retirement, lence in customer service while reflecting on his career while having well trained and changes within the managers to fill current equipment industry, Bailey needs as well as those that indicated the biggest change come as a result of company he has witnessed over the growth, is to develop your years has been the expansion managers from the ground and importance of the rental up. segment to running a suc“Scott Cummins and the cessful construction equipSEC executive management ment company. team, take great pride in the “When I started in the Management Trainee industry, a lot of equipment Program,” said Daniel. “We dealers weren’t focused on bring in trainees and equipment rentals. All of the empower them to make the focus was on whole good most of each opportunity sales,” said Bailey. and excel at their own pace. During his career, Bailey We give them an initial orifocused on developing and (L-R) are Zac Helms, Scott Equipment Memphis branch manager; Clint Bailey, retired branch manager; and entation into the SEC busimaintaining close customer Jeremy Daniel, senior vice president, divisional manager at the Memphis, Tenn., location, Scott Equipment. ness model and how each relationships and achieving successful department is run. excellence in customer service. He attributes these core val- the booth and just started talking to them, and was lucky Once the trainees understand the company from a high level, ues to making him a success. Upon his retirement, Bailey enough to be offered a job as a manager trainee. I went to they are paired with mentors in various departments to learn stressed that customer relationships and customer service are Nashville to train and worked in all of the departments at the the details of how to run a department successfully and proftwo aspects of the industry that have not changed. To reiter- Scott Equipment branch. I worked in parts, service and actu- itably while delivering excellent customer service. As each ate his point, Bailey said, “Some may say it’s just a numbers ally started out for the first month and a half on the wash rack candidate masters a department, they are moved to another game — I say that’s absolutely not true. No matter what you cleaning equipment. After nine months of working in all of area to broaden their knowledge base. Once the trainee do, you still have to have good customer relationships and the departments, I was presented with the opportunity to go shows an aptitude for a specific job, they are then eligible for take care of customers. This combination is a constant in this run two store locations in Springdale and Ft. Smith, Ark. I a permanent position as a department or even branch manbusiness.” did that for two years and then I was offered the opportunity ager within the SEC system.” Now that he’s leaving the industry, Bailey has a few to come to Memphis to replace Clint, and I couldn’t be hap“Any service and multi-layered company is challenged things he’s looking forward to; “I have a vacation home in pier. Clint left me with a great base of business and I see a with getting the right people in the right positions and develMonteagle, Tenn., that my wife and I haven’t been able to ton of potential for growth for SEC in the Memphis market.” oping managers to handle growth. The Management Trainee spend a lot of time at — now we can. I also get to play a fair Helms started at the Memphis branch at the end of April Program gives SEC the opportunity to develop managers amount of golf, as well as more non-profit work that I’m pas- and worked with Bailey until Bailey’s official retirement on over time in a real world environment while maintaining the sionate about and more work at my church.” the last day of May. company’s culture.” Bailey wanted to thank all of the customers he had the “Clint’s done a great job of running this store and creating Also, Daniel stressed, “We look for smart, qualified peopleasure of working with over the past 40 years. “Working a strong brand presence for SEC in this market and I could- ple with specific personality traits. We do not look for peowith people is so special. I’ve been very blessed that many n’t be more thankful for that,” said Helms. “My plan going ple to fill specific positions with specific experience. We of my customers have also become my close friends.” forward is to continue to steadily grow. My personal philos- prefer to teach good people the job and let their talents take Zac Helms has taken over Bailey’s responsibilities as the ophy for both business and life is progression and not per- over.” new Memphis branch manager. After graduating from LSU fection. That’s what I’m looking for every day, every week (This story also can be found on Construction in 2013, Helms started with SEC as a Management Trainee and every month, to be a little bit better than before, and just Equipment Guide’s website at www.constructionequipwhere he learned the details of running each department grow and take care of our customers. Make sure the cus- mentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE โ ข www.constructionequipmentguide.com โ ข July 20, 2016 โ ข Page 25

#6* -% %* ''&3&/5 ล

5. 8 F I O XF T BZ #VJ M E %J ลขFS FOU XF S F U BM LJ OH BCPVU CVJ M EJ OH CFU U FS "OE T NBS U FS

4BOZ "NFS J DB FY DBW BU PS T CPBT U U IF S FM J BCJ M J U Z FลฅDJ FODZ BOE QPXFS PG U IF CJ H CS BOET XJ U IPVU U IF CJ H CS BOE J NQBDU PO U IF CPU U PN M J OF "OE U IBU T T NBS U * OU * S PO DPN 4BM FT !* OU * S PO DPN

"U * OU FS OBU J POBM * S PO XF QBS U OFS XJ U I PVS DVT U PNFS T U P IFM Q U IFN CS FBL PVU PG U IF DPNQM FY XBZT PG EPJ OH CVT J OFT T U P FYQFS J FODF B QBS U OFS T IJ Q U IBU CFHJ OT XJ U I B 5. IBOET IBLF CVU U IBU T K VT U U IF CFHJ OOJ OH -FU T HFU U PHFU IFS BOE #VJ M E %J ลขFS FOU

Page 26 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ST TAY IN THE BLACK. CHOOSE OSE CA ATT YELLOW YE ELLOW W.. ®

NEW CAT LLEASE EASE A N EW C AT M MINI INI EEXCAVATOR XCAVATOR TODAY TODAY FOR FOR JUST JUST

$$300 30 0 U USD SD P PER ER M MONTH ONTH

W WITH ITH ZZERO ERO DO DOWN. WN. WE EVEN THROW IN AN WE’LL EQUIPMENT PROTECTION PLAN.*

www.FloridaCatDealers.com/cce /

SKID STEER LOADER MODEL 226D

COMPACT TRACK LOADER MODEL 239D

BACKHOE LOADER MODEL 415F2

SMALL WHEEL LOADER MODEL 926M

LEASE FOR $406 PER MONTH

LEASE FOR $571 PER MONTH

LEASE FOR $1,031 PER MONTH

LEASE FOR $2,083 PER MONTH

KELLLY TRACTOR CO.

RING POWER CORPORA ORPORA ATION TION

www.kellytractor.com 305-592-7184 Miami • Davie • West Palm Beach Clewiston • Fort Myers

catrental.ringpower.com 888-748-7464 Jacksonville • St. Augustine • Lake City • Tallahassee Ocala • Tampa • Daytona Beach • Lakeland Brooksville • Sarasota • Palm Bay • Orlando

THOMPSON TRACTOR CO. www.thompsontractor.com 850-785-4007 Crestview • Panama City Pensacola

*Offer valid from July 1, 2016 to September 30, 2016 on select new models of machines manufactured by Caterpillar Inc. Building Construction Products Division. Offer available only at participating Cat dealers. Flexible payment terms available. Offer is available to customers in the USA and Canada only and cannot be combined with any other offers. Financing and published rate are subject to credit approval through Cat Financial. Offer subject to machine av availability. ailability. Machines sold in Canada by authorized dealers are priced in Canadian dollars and the price may take into account the ex exchange change rate of Canadian dollars to U.S. dollars. Models shown here do not necessarily reflect the exact model and configuration to which the promotion applies. Payments are based on a finan finance ce lease with 60 monthly payments and $0 down. Payments do not include taxes, freight, set-up, delivery delivery,, document fees, inspections, additional options, or attachments. Final machine prices are subject to change. The Equipment Protection Plan (EPP) applies to select models and is provided through Cat Financial for use at participating Cat dealers. Offer may change without prior notice and additional terms and conditions may apply apply.. Contact your Cat dealer for details. Model and configuration used for promotional lease payment calculation: 300.9D Mini Excavator with cab with canopy,, pattern changer changer,, straight blade, expandable undercarriage and 10” bucket. © 2016 Caterpillar Caterpillar.. All Rights Reserved. CA CAT, ATT, CATERPILLAR, CA ATERPILLAR, TERPILLAR, BUILT BUILLTT FOR IT, ITT,, their respective logos, “Caterpillar Yellow,” YYellow ellow w,” the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ July 20, 2016 â€¢ Page 27

FAE - 300/SC Stump Cutter NEW

STUMP CUTTER QUICK SPECS: s #UTTER 7HEEL v X v s #UTTER 7IDTH v s #UTTING $EPTH v s #UTTING (EIGHT v s 1TY #ARBIDE 4EETH s (0 2EQUIREMENT MIN MAX s &LOW '0s 0RESSURE 03) s 7EIGHT LBS

1.866.643.1010 ClearSpan.com/ADCEGSE

WE MANUFACTURE t WE INSTALL WE SAVE YOU MONEY BUILDINGS OF 1,000 USES

TRACTOR QUICK SPECS: s %NGINE *OHN $EERE (& (0 s 5NDERCARRIAGE "ERCO $ OSCILLATING s 4RACK 3HOES ,'0 v s 'ROUND 0RESSURE 03) s (Y 3YSTEM $ANFOSS s 7EIGHT 7 / HEAD )BS The new 300/SC Stump Cutter is designed and built for prime mover carriers. This powerful attachment tool is equipped with a Danfoss hydraulic motor (51V250) and an aggressive cutting wheel consisting of 36 carbide teeth to power its way through stumps. The frame is designed to operate safely in all environments. FAE USA INC. 2AFE "ANKS $R s /AKWOOD )NDUSTRIAL 0ARK s &LOWERY "RANCH '! 0H s &AX s INFO FAEUSA COM

Fabric Structures

Hybrid Buildings

Foundation Solutions

ZERO PERCENT FINANCINGG AAVAILABLE AVVAILABLE

RESTRICTIONS R ESTTR ICT I ONS MAY MAY APPLY A PPLY

Page 28 â€˘ July 20, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

www.ironhorseequip.com

Brentwood, NY

(800) 999-6044 or (631) 273-1893 Fax: (631) 273-2418

ironhorseequip@msn.com Equipment â€˘ Hammers â€˘ Parts Attachments â€˘ 24/7 On Job Service Specializing in all your hydraulic hammer needs worldwide

2004 CATERPILLAR 430D IT, 7215 HRS, 4WD, 4X1 FRONT BUCKET

2007 CATERPILLAR M315D, 10368 HRS, A/C,HEATER, AUXILIARY

1985 INGERSOLL-RAND ECM350, DRIFTER VL140, READY TO WORK

1992 INGERSOLL-RAND ECM490, 5352 HRS, CUMMINS, READY TO WORK

1988 KOEHRING 6633 LC-7, 19647 HRS, HYD LINE, 10FT 6IN STICK, Q/C

2003 INGERSOLL-RAND 1070 CFM, 7000 HRS, 350 PSI, CAT E15

2013 CAT 302.7D CR, STK #: H1055, 856 HRS, BLADE LEVELING, AUX HYD

1990 INTERNATIONAL KNUCKLEBOOM TRUCK, 20 FT. FLATBED, DUNBAR TICO KNUCKLEBOOM, 40â€™ BOOM, 15,000LBS LIFT CAPACITY, TYPE 1585T, S/N: 150613, 129,313 MILES, EXCELLENT CONDITION

2007 KOMATSU SK1020-5N, 2219 HRS, 72â€? GP BUCKET W/ BOLT-ON CUTTING

2007 KOMATSU PC138US LC-8, 8732 HRS, A/C ,HEAT, Q/C, AUX HYD

Rockblaster Hammers

Projects Include Washington Street Off-Ramp in Baton Rouge

TR AM AC

KEEP YOUR BELTS FULL. Ĺ˜ 0RXQW D 7UDPDF 5RFN %UHDNHU DW \RXU SULPDU\ Ĺ˜ $YRLG JDSV LQ SURGXFWLRQ Ĺ˜ 5HDFK LQ TXLFNO\ WR EUHDN DQG FOHDU EULGJHG DQG EORFNHG PDWHULDO Ĺ˜ (QVXUH VDIHW\ ,QFUHDVH SURGXFWLRQ DQG UHOLDELOLW\ Ĺ˜ 7UDPDF LV D \HDU ROG IDPLO\ RZQHG FRPSDQ\ :H VSHFLDOL]H LQ 5RFN %UHDNHU (QJLQHHULQJ 0DQXIDFWXULQJ 6DOHV DQG 6XSSRUW

TRAMAC

800-526-3837

www.tramac.com

GRANT from page 1 Orleans, and advancing design of the Iaward will make it possible to invest in 20/220 interchange into Barksdale. infrastructure projects across the State of â€œThe entire state stands to benefit from Louisiana,â€™â€™ Edwards said in a statement. this grant,â€™â€™ Edwards said. â€œBy freeing up â€œFrom north Louisiana to south Louisiana state funds for this project, we will be in a â€” east to west â€” position to redirect we have infrastrucresources to other ture needs that have critical infrastrucbeen ignored for ture needs across years. A robust Louisiana. This Louisiana economy was a collaborative is dependent upon a effort between strong infrastrucstate, federal and ture, and I am looklocal stakeholders ing forward to getthat will have sigting projects undernificant impact on way across the our state.â€™â€™ state.â€™â€™ â€œAs we consider Gov. John Bel Edwards ways to invest in Those projects include constructransportation tion of a new infrastructure for Washington Street Louisiana, this off-ramp in Baton Rouge, advancing the grant is a great first step to beginning that design of a reconstructed interchange at process,â€™â€™ Wilson said. Loyola Avenue for the New Orleans Airport, (This story also can be found on improving railroad crossings on the freight- Construction Equipment Guideâ€™s website at rail corridor between Baton Rouge and New www.constructionequipmentguide.com.)

A robust Louisiana economy is dependent upon a strong infrastructureâ€Ś

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 29

FLINT Construction & Forestry Division Albany, GA 229/888-1212 Adairsville, GA 770/773-9857 Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Macon, GA 478/788-1586 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370

Troy, AL 334/566-4181 Dothan, AL 334/794-8691 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420

Bobcat of Jacksonville

James River Equipment

International Iron

Meco Miami, Inc.

Pittman Tractor Company, Inc.

www.bobcatjax.com 11657 Philips Highway Jacksonville, FL 32256 904/288-9181

Asheville, NC 828/667-0176 Charlotte, NC 704/597-0211 Greensboro, NC 336/668-2762 Mt. Gilead, NC 910/439-5653 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Wilmington, NC 910/675-9211 Fayetteville, NC 910/424-1200

www.intiron.com 2325 Clark Street Apopka, FL 32703 407/809-5856

www.mecomiami.com 5825 N.W. 74th Ave. Miami, FL 33166 305/592-4332

www.pittmantractor.com 9652 Milton Jones Rd. Daphne, AL 36526 251/621-3555

Page 30 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

INTERNATIONAL IRON 2325 Clark St Apopka, FL 32703 407-809-5856 F407-347-4664 www.intiron.com

RICHARDSON SERVICE 1991 INC. 2667 U. S. 378, Conway, SC 29527 800-968-0754 www.rs91inc.com

MECO MIAMI, INC. 5825 NW 74th Avenue Miami, FL 33166 305-592-4332 www.mecomiami.com

CENTRAL ATLANTA TRACTOR SALES, INC. 7330 Delta Circle Austell, GA 30168 770-819-6600 www.centralatlantatractor.com

TUFF EQUIPMENT COMPANY 181 Industrial Blvd. LaVergne, TN 37086 615-851-4345 1-877-634-TUFF www.tuffequipco.com

EARTHMOVER CONSTRUCTION EQUIPMENT LLC A Division of Advantage Construction Equipment & Parts 8451 SW Old Kansas Ave. Stuart, FL 34997 407-401-8956 www.constructionequip.com

MAY HEAVY EQUIPMENT RENTAL & SALES Raleigh, NC 866-629-3784 www.mayequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 31

UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.

MINI

SHORT RADIUS

CONVENTIONAL

KOBELCO-USA.COM

Alexandria, LA 318-448-1647 Shreveport, LA 318-226-9696 Monroe, LA 318-388-9300 Little Rock, AR 501-455-5955

www.ScottCompanies.com Memphis, TN Ft.Smith, AR 901-547-8008 479-648-1600 LaVergne, TN Springdale, AR 615-793-3888 479-751-4242 Jackson, MS Texarkana, AR 601-373-4600 870-772-0204

Scott Van Keppel Omaha, NE 402-597-0860 Ankeny, IA 515-964-2762 Cedar Rapids, IA 319-365-9155

www.companywrench.com Lexington, SC 125 Wilson Mills Rd. 803-520-0032 Smithfield, NC 27577 Fax: 803-520-7469 919-938-8145 Knoxville, TN Fax: 919-938-9129 865-766-2571 Fax: 865-766-2815

www.cowin.com Huntsville/Decatur, AL 2238 Pinson Valley Pkwy 256-350-0006 (Decatur) Birmingham, AL 35217 256-536-9390 (Huntsville) 205-841-6666 Oxford, AL Mobile, AL 256-832-5053 251-633-4020 Pensacola, FL Montgomery, AL 850-479-3004 334-262-6642 Atlanta, GA 404-696-7210

www.gsequipment.net GREAT SOUTHERN GS EQUIPMENT CONSTRUCTION Tampa, FL EQUIPMENT 866-586-8956 Orlando, FL Pompano Beach, FL 407-859-9160 954-327-8808 Jacksonville, FL Ft. Myers, FL 904-268-4400 239-334-6063 Tallahassee, FL 850-574-0892

www.highwayequipment.com 8071 Lee Highway Troutville, VA 24175 540-992-4650 Fax: 540-992-3742

Page 32 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. GO WITH KOMAT With Komatsu CARE you can:

>>>>>

KCMA Corporation Names Pittman Tractor to Represent Kawasaki-KCM

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

TIER 4 INTERIM E

• Lower your cost of ownership MAINTENANCE B • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment

y Komatsu T CARE complim

To learn more e about

It’s just part of our Program Komatsu designed to deliver complete CARE contact your 3 years, plus 2 c service and support solutions to Komatsu customers. Komatsu distributor or scan

thisCARE QR code Komatsu

To learn more about with your contact your Komatsu distributor or scan smart phone. this QR code with your smart phone.

Lower your c

Increase equ

Protect the va

It’s just part of ou solutions to Kom

MIDWEST KOMATSU DISTRIBUTORS

H&E Equipment Services

KCMA Corporation recently announced that Pittman Tractor Company will be representing Kawasaki-KCM wheel loaders in the southern Alabama market, as well as the Florida panhandle.

KCMA Corporation recently announced that Pittman Tractor Company will be representing Kawasaki-KCM wheel loaders in the southern Alabama market, as well as the Florida panhandle. Since 1988 Pittman Tractor has been providing this market products in the construction, road building and equipment rental markets. Headquartered in Daphne, Ala., Pittman will represent Kawasaki-KCM wheel loaders in addition to its current offerings of Dynapac, Carlson, and an extensive rental equipment fleet. Trip Pittman is an industry veteran who grew up around the equipment business and remains passionate about the industry. The Pittman staff consists of industry veterans. Billy Deese, parts and service manager has more than 30 years in the industry, and their sales staff averages 30 to 40 years in the industry. Gary Bell, KCMA vice president, general manager said, “Pittman Tractor Company will be a welcome to our distribution network bringing their expertise in sales and service in the construction equipment industry to the South Alabama and Florida Panhandle markets.” “We are excited to represent a quality wheel loader line of equipment in Kawasaki-KCM, the most durable and dependable loader on the market,” said Trip Pittman, president. For more information on Pittman Tractor, visit www.pittmantractor.com. For more information on Kawasaki and KCMA, visit trykawasakiloaders.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.he-equipment.com AR Little Rock 501-568-7867 800-632-0577 Springdale 479-927-1672 888-200-6343 LA Alexandria 318-443-7173 800-249-8485 Baton Rouge 225-356-6113 800-872-1305 Bossier City 318-746-5272 800-643-2844 Broussard 337-837-9600 877-463-9914 Kenner 504-467-5906 800-203-1869 Sulphur 337-528-2661 800-258-1614

Linder Industrial Machinery www.linderco.com FL Ft. Myers 239-337-1313 Jacksonville 904-786-6710 Ocala 352-629-7585 Orlando 407-849-6560 Pembroke Pines 954-433-2800 Plant City 813-754-2727 West Palm Beach 561-863-0570 NC Arden 828-681-5172 Charlotte 704-376-7554 Greenville 252-695-6200 Greensboro 336-665-0110 Raleigh 919-851-2030 Wilmington 910-254-2031

W E S T K O M AT S U D I S T R I B U T SC UT Soldotna Bacon-Universal Hurric 907-262-5977 Company,Greer Inc Company, Inc.. 435-9 800-254-5977 864-877-8962 Salt L Wasilla HI 801-9 North Charleston 907-376-3838 Hilo 800-973-2607 South 808-935-8595 843-552-0095 801-9 800-352-3508 Kirb Kirby-Smith y-Smith Mac Machinery hinery Inc Inc.. WY West Columbia Honolulu Gillett 808-839-7202 803-794-6150 307-6 800-352-3508 Kailua-Kona 808-326-1212 800-352-3508

Oklahoma City 405-495-7820 800-375-3339 Tulsa 918-438-1700 800-375-3733

Rock S 307-6

Lyle Machinery Co.Mode

Kauai (Lihue) 808-245-8472 800-352-3508

www.lylemachinery.com MS TX Columbus Abilene 325-692-6334 877-577-5729 662-243-2152 Claremont Clar emontHattiesburg Equipment Co Co.. Amarillo 806-373-2826 .clairemontequipment.com 800-283-1247 601-296-7556 CA Dallas Escondido Jackson 214-371-7777 760-739-9100 800-753-1247 601-939-4000 Imperial Ft Worth Magnolia 760-355-7700 817-378-0600 877-851-9977 San Diego 601-783-2111 858-278-8351 Lubbock Saucier 806-745-2112 Craig Taylor Equipment Cr 866-289-6087 Company 228-832-7575 Wailuku Maui 808-244-9158 800-352-3508

ylorequipment.com AK

Komatsu Equipment Co. Co. tsueq.com

Power Equipment

Anchorage 907-276-5050 800-279-5051

Elko www.powerequipco.com 775-753-7561 North Las Vegas MS 702-399-1004 Saltillo Reno 775-356-1334 662-869-0283 TN Chattanooga 423-894-1870 Kingsport 423-349-6111 Knoxville 865-577-5563 LaVergne 615-213-0900 Memphis 901-346-9800

Fairbanks 907-452-1192 800-452-1192

Boise 208-3 800-2 Pocate 208-2 800-8 MT

Billing 406-2 800-7 Kalisp 406-7 800-4 Misso 406-5 800-3 OR

Eugen 541-6 800-8 Portla 971-2 800-9

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ July 20, 2016 â€¢ Page 33

Rish Equipment Company www.rish.com MD Frostburg 301-689-2211 VA Bealton 540-439-0668 Chesapeake 757-485-2100 Chester 804-748-6411 Coeburn 276-395-6901 Salem 540-380-2090 Staunton 540-887-8291 WV Beckley 304-255-4111 Bluefield 304-327-5124 Bridgeport 304-842-3511 Logan 304-752-9313 St. Albans 304-755-3311

INTELLIGENT MACHINE CONTROL t 'JSTU UP MBTU QBTT HSBEJOH UFDIOPMPHZ t 3FWPMVUJPOBSZ USBDL TMJQ DPOUSPM t &YUFSOBM TUSPLF TFOTJOH IZESBVMJD DZMJOEFST t /FX 5JFS 'JOBM UFDIOPMPHZ

Tractor & Equipment Company www.tractor-equipment.com AL Alabaster 205-621-2489 Anniston 256-831-2440 Birmingham 205-591-2131 Decatur 256-355-0305 800-321-6865 Dothan 334-678-1832 Mobile 251-457-8991 800-233-7213 Montgomery 334-288-6580 800-832-9563 Tuscaloosa 205-752-0621 Tuscumbia 251-275-4159 FL Panama City 850-763-4654 Pensacola 850-505-0550 GA Albany 229-435-0982 800-733-0962 Augusta 706-798-7777 800-659-3090 Calhoun 706-879-6200 800-827-3072 Columbus 706-562-1801 877-307-6439 Forest Park 404-366-0693 Hoschton 706-654-9850 888-334-9850 Kennesaw 678-354-5533 Macon 478-745-6891 Savannah 912-330-7500 800-827-1405

www.komatsuamerica.com/komatsu-care

i'SPN mOBODJOH UP QSPEVDU RVBMJUZ UP TVQQPSU BOE USBJOJOH BGUFS UIF TBMF ,PNBUTV EFMJWFST FWFSZUIJOH NZ DVTUPNFST EFNBOE * WF CFFO TFMMJOH UIFJS GVMM MJOF JODMVEJOH UIF 19J BOE &9J TFSJFT EP[FST GPS ZFBST *OOPWBUJPO BOE UIF FYDMVTJWF JOUFMMJHFOU .BDIJOF $POUSPM TFU UIFN BQBSU GSPN UIF PUIFST "OE UIBU T XIZ * ". ,0."546 w

SUPPORTED WITH PRIDE

Page 34 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tilt cab

Superior boom design

Removable outrigger boxes

RT9150E rough-terrain crane

Need Financing?

At Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With  rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite. Featured is the RTE – its  USt capacity and  ft. boom combination provide the best capacity and longest boom in its class.

For more information, visit www.manitowoccranes.com

HE-equipment.com

www.cowin.com Birmingham, AL 205-841-6666 Mobile, AL 36608 251-633-4020 Montgomery, AL 334-262-6642 Pensacola, FL 850-479-3004 Huntsville, AL 256-536-9390 Decatur, AL 256-350-0006 Oxford, AL 256-832-5053

Springdale, AR 479-927-1672 Little Rock, AR 501-568-7867 Shreveport, LA 318-746-5272 Alexandria, LA 318-443-7173 Lafayette, LA 337-837-9600 Lake Charles, LA 337-528-2661

Baton Rouge, LA 225-356-6113 Kenner, LA 504-467-5906 Memphis, TN 901-375-4902 Nashville, TN 615-248-0266 Chattanooga, TN 423-499-7700 Arden, NC 828-684-1692

www.ringpowercrane.com Charlotte, NC 704-504-2870 Raleigh, NC 919-781-9454 Winston-Salem, NC 336-767-6900 Chesapeake, VA 757-295-4944 Ashland, VA 804-798-9740 Roanoke, VA 540-362-3600 Warrenton, VA 540-349-2878

St. Augustine, FL 904-737-7730 Pompano Beach, FL 954-971-9440 Tampa/Orlando, FL 407-855-6195 Miami (Int. Sales) 305-477-8717 Union City, GA 770-774-7300 Concord, NC 704-795-3636 Ladson, SC 843-818-1954

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 35

WE DO MORE THAN DESIGN EQUIPMENT.

WE POWER YOUR SUCCESS.

Whether you are looking for products with the llatest atest ttechnology echnolog y or you want to have your old machine rremanufactured, emanuffactured, Doosan Por table Power can help you achieve success. Focused on ccustomer ustomer ssatisfaction atisffaction and product solutions, our de dealer aler netw network ork is the largest nationwide network in the ind industr y.

CONTTACT YOUR LOCALL DEALER DEAL TODAY. AIR COMPRESSOR SALES ASC CONSTRUCTION EQUIPMENT GEORGIA 5490 Thomaston Road Macon (478) 474-8460

PINNACLE CENTRAL COMPANY, INC. www.pinnaclecentral.com FLORIDA 103 Bryan Street Jacksonville (904) 354-5746 Polk City (888) 253-2444

NORTH CAROLINA 11425 Reames Rd Charlotte (704) 596-8283 Asheville (828) 687-0620 Raleigh (919) 661-8710

SOUTH CAROLINA Columbia (803) 791-0740 Piedmont (864) 704-1060 North Charleston (843) 414-1120

Greenville (252) 754-5280

TENNESSEE Knoxville (865) 525-1845

GEORGIA Savannah (912) 964-8079

Chattanooga (866) 495-3406

DoosanPortablePower.com | 800.633.5206

Sa Sales. les. P Parts. arts. Service. Service. BLANCHARD MACHINERY, INC. www.blanchardmachinery.net FLORIDA 1890 NE 150th St. Miami (305) 949-2581 Fax: (305) 949-0747

COWIN EQUIPMENT ALABAMA

FLORIDA

2238 Pinson Valley Parkway Birmingham (205) 841-6666

Pensacola (850) 479-3004

Mobile (251) 633-4020

Miami (305) 232-2255

Montgomery (334) 262-6642

West Palm Beach (561) 833-4634

Huntsville (256) 350-0006

RICHMOND MACHINERY VIRGINIA 1701 Roseneath Road Richmond (804) 359-4048

GEORGIA Atlanta (404) 696-7210

Oxford (256) 832-5053

LaVergne (704) 280-2762

Page 36 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

U.S. Shoring Hosts More Than 80 Guests for Demo of Drilling Systems

.S. Shoring and Equipment Co., Euless, Texas, hosted more than 80 guests for a demonstration of the new Barbco Inc., TriBor and FlexBor drilling systems. Attendees came from 27 companies from all over the United States to the first-time event. Chad Pendley, national sales representative of U.S. Shoring and Equipment, welcomed guests to Texas and introduced Tony Barbera, vice president of Barbco Inc., and inventor of the TriBor system. Also introduced was Derik Engle, inventor and developer of the FlexBor system. All three men were on hand to guide the attendees through the processes that were being demonstrated and to answer questions. The new TriBor system is one machine that can do auger bores, pilot shots, HDD drilling and jacking. All of these tasks can now be performed from a bore pit that is as small as 16 ft. (4 m) in length. The TriBor system also allows for wireless, remote-controlled operation from ground level, keeping the operator out of the pit, as well as being able to operate the tethered power packs on-board mud pump. The FlexBor system demonstrated the ease of performing HDD (horizontal directional drilling) that virtually eliminates the threat of inadvertent returns and in most cases, eliminates the need and costs associated with drilling fluids inherent to conventional HDD methods. Benefits of the FlexBor system include the elimination of slip threats on steep side-hill applications; reduced/eliminated cuttings and bentonite disposal fees; more shallow and serviceable installations; and easier permitting in environmentally sensitive

CCS EQUIPMENT SALES www.ccsequipment.com Raleigh/Durham, NC • 919-556-9110 Angier, NC • 919-935-0505

MAY HEAVY-EQUIP RENTAL & SALES

(L-R): Matt Wolf, Scott Fisher, Tony Barbera, vice president of Barbco, give David O’Leary, Directional Road Boring Inc., of Metairie, La., specs on the new 60/1.2M Barbco auger/boring machine (ABM).

www.mayequip.com Lexington, NC • 866-629-3784 Charleston, SC • 866-629-3784 Columbia, SC • 866-629-3784

HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 8071 Lee Hwy. • Troutville, VA 24175 540-992-4150

(L-R): Arturo and Robert Rubio of Qro Mex Construction Co., Granite Shoals, Texas, pose with Chad Pendley, national sales representative of U.S. Shoring & Equipment Co., Euless, Texas, and the 60/1.2M Barbco auger/boring machine (ABM).

areas. Barbera said that efficient operation; lowering overall cost; and adhering to all the rules for being environmentally friendly were the driving factors behind these advances. Guests were impressed with the two systems, claiming that both were the most innovative systems they had seen

in years and that the demonstration was very informative — being able to see first-hand how the products actually worked was extremely beneficial, they said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

GROVE RIVER www.groveriver.com 902 Longwood Drive Richmond Hill, GA 31324 912-756-7854

PITTMAN TRACTOR COMPANY, INC. www.pittmantractor.com 9652 Milton Jones Rd. Daphne, AL 36526 251-621-3555

The crowd watches the demonstration of the wireless remote control feature, which keeps the operator out of the pit and as well as in control of the material handling crane.

Guests had a chance to see Barbco’s wireless 30 in. (76.2 cm) cradle boring machine 30CBM and the power unit for the TriBor, including the mud pump and tank. The demonstration included the operational benefits of the TriBor and FlexBor.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 37

COWIN EQUIPMENT COMPANY, INC. Birmingham, AL • 800-239-2694 Montgomery, AL • 800-239-6642 Madison, AL • 256-350-0006 Huntsville, AL • 800-239-7368 Oxford, AL • 800-917-7931 Pensacola, FL • 800-239-4736 Atlanta, GA • 800-849-3540

CLM EQUIPMENT CO., INC. www.clmequipment.com Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Baton Rouge, LA • 255-677-7838 Biloxi, MS • 228-396-8740 Houston, TX • 281-598-2500

GS EQUIPMENT INC. Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892

ONE FOCUS. COMPLETE SOLUTIONS. GREAT SOUTHERN CONSTRUCTION EQUIPMENT

> >

Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400

> > >

LINK-BELT MID ATLANTIC Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248

www.heavymachinesinc.com Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453

> > >

Page 38 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Michael Lindsay (L) and C.M. Lindsay Jr (R), both with C.M. Lindsay & Sons in Lumberton, N.C., congratulate Johnny Parker for his 50 years of service

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

Johnny Parker Celebrates 50 Years With Gregory Poole POOLE from page 12

to our technician force during that time. The investment in our technicians alone is a huge investment in how we try to serve our customers.” This investment in the company’s technicians has paid off in the form of great employees like Parker. Greg Poole, president of Gregory Poole Equipment Company, said this is an important milestone for Parker and for his company. “We’re here to celebrate Johnny Parker’s 50th anniversary with us, which is a huge milestone. In fact, he’s the first employee to

reach full-time status for 50 years. The things that come to mind when I think about Johnny is commitment, loyalty to this company, his trustworthiness and his integrity, and all of those happen to be the core values of this company. That’s why we have been in business for 65 years, and its what keeps us going everyday. It’s been quite a journey for Johnny and quite a journey for us too.” For more information, visit www.gregorypoole.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com The service technicians take a break to enjoy lunch.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 39

A Authorized uthorized Doosan Doos an Dealers Dealer s

A ARKANSAS RK ANSAS A Alma l ma T Tractor ractor & Equipment Equipment Alma A l ma 4 479-632-6300 79-632-6300 w www.almatractor.com w w.almatr ac tor.com

RUN STRONG.

FLORIDA FLORIDA Bobcat off D Daytona Beach Bobcat o aytona B each Daytona Beach D ay tona B each 3 386-274-1002 86-274-1002

Bobcat of Tallahassee Tallahassee Bobcat of M idway Midway 850-222-7444 850 -222-7444

G GEORGIA EORGIA Cowin Cowin Equipment Equipment C Company, ompany, IInc. nc. Mableton Mableton 404-696-7210 404-696-7210 www.cowin.com w w w.cowin.com

MI MISSISSIPPI SSISSIPPI H H&E &E Equipment Equipment S Services er vices JJackson ackson 6 601-373-0444 01-373- 0444 HE-equipment.com H E- equipment.com

NORTH NORTH CAROLINA CAROLINA H H&E &E Equipment Equipment Services Ser vices A Arden rden 828-684-1692 828-684-1692

Cha Charlotte rlotte 704-504-2870 704-504-2870

Raleigh Raleigh 9 919-781-9454 19-781-9454

Winston-Salem W inston-Salem 336-767-6900 336-767-6900 HE-equipment.com H E- equipment.com

SOUTH SOUTH CAROLINA C AROLINA H H&E &E Equipment Equipment Services Ser vices C Columbia olumbia 803-776-8465 803-776-8465

Gr Greenville eenville 864-272-2600 864-272-2600 HE-equipment.com H E- equipment.com

T TENNESSEE ENNESSEE H H&E &E Equipment Equipment Services Ser vices Memphis Memphis 9 901-375-4902 01-375-4902

Want to run strong equipment? Run Doosan.

HE-equipment.com H E- equipment.com

V VIRGINIA IRGINIA H H&E &E E Equipment quipment S Services er vices A Ashland shland 804-798-9740 804-798-9740

Request FREE product information:

DoosanEquipment.com/RunStrong21

N Norfolk or fo olk 7 757-295-4944 57-295-4944

R Roanoke oanoke 5 540-362-3600 40 -362-3600

W Warrenton arrenton Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Infracore Construction Equipment America. All rights reserved. | 49040-2

5 540-349-2878 40 -349-2878 HE-equipment.com H E- equipment.com

Page 40 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Terramac Unveils New Unit at RT14R Tow & Show Tour Terramac, a manufacturer of rubber track crawler carriers, recently wrapped up its successful RT14R Tow & Show. Terramac partnered with its North American dealer network for the one-of-a-kind event to showcase its new 360-degree rotating unit to current customers and prospects throughout the United States and Canada. During the eight-week tour, the RT14R made its debut at nine dealer locations, one expo and several private end-user demos. Each event was attended by contractors from a variety of industries, including: pipeline, utility, railroad, municipal, paving, environmental, logging and general construction. Attendees were educated by Terramac representatives on the RT14R’s features and benefits, given complete walk-arounds of the new model and participated in live demonstrations. “The RT14R Tow & Show enabled us to introduce our rotating crawler carrier to hun-

Groff Tractor showcased the Terramac RT14R to customers in Mechanicsburg, Pa., which was one of three events hosted over the course of the week-long tow and show event.

beneficial for reducing cycle times in various applications. “The time saved adds up quickly when you factor in Shafer Equipment provided a demo of the Terramac RT14R in how many loads are a confined space at its tow and show event in Clendenin, W.Va. being hauled on a daily basis,” said Jesse Whittaker, Terramac regional sales dreds of end-users within a short period of manager. “Users at the tow and show events time,” said Matt Slater, director of sales at loaded and unloaded the unit at various Terramac. “Experienced operators expressed dumping angles to experience its benefits enthusiasm for having a rotating carrier first-hand. Discussions about rentals and available to the market, while others were purchases are under way which proves the intrigued by RT14R’s additional capabilities RT14R is in high demand.” and innovative design.” Manufactured in the USA, the RT14R is “We took full advantage of the RT14R built with a rotating upper frame. The Tow & Show by hosting three events for our Terramac RT14R can carry and dump up to customers,” explained Mike Lester, vice 28,000-lb. of material at any position, allowpresident at Groff Tractor. “Dozens of end ing it to offload materials faster than a stanusers showed up at each event, eager to see dard straight frame unit, according to the the new RT14R in action. Contractors from manufacturer. numerous industries were instantly Equipped with tracks that don’t need to be enthralled by the unit’s capabilities and have counter rotated the RT14R dumps material already begun planning for how they intend without tearing up the ground, reducing to incorporate Terramac’s RT14R on environmental damage and land restoration upcoming projects.” costs. The 40,000-lb. machine also is powFurthermore, attendees were impressed ered by a QSL9.0 320-hp Tier IV Final by the RT14R’s durability, power and techCummins diesel engine to boost jobsite pronological advancements and found the ductivity while remaining highly fuel effimodel’s 360-degree rotating upper frame

cient. And, its minimal 7.9-psi ground pressure while fully-loaded enables it to conquer soft or wet ground conditions and mountainous terrain. In addition, Terramac’s new unit provides users with increased safety and easy maintenance. The RT14R boasts full cab visibility and eliminates the time operators spend in reverse, enhancing jobsite safety. Downtime

is reduced with easy access to maintenance checks and track wear is significantly less as the unit can spin, resulting in reduced expenses for repairs. For more information, call 630/365-4800 or visit www.terramac.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Terramac dealer Bobcat of St. Louis put the RT14R crawler carrier to the test at its Valley Park, Mo., tow and show event.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 41

GROWERS EQUIPMENT CO.

CHARLOTTE TRACTOR

DITCH WITCH OF TENNESSEE

GREENSBORO TRACTOR

FUTCH’S TRACTOR DEPOT, INC.

2695 Davie Road Davie, FL 33314 954-916-1020 www.growers equipment.com

1700 Starita Road Charlotte, NC 28206 704-596-8900 www.charlottetractor.com

Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576 www.ditchwitchtn.com

2820 S. Elm-Eugene Street Greensboro, NC 27406 336-273-3606 www.greensboro tractor.com

8515 SR 207 N. Hastings, FL 32145 904-692-3673 www.futchstractor depot.com

COASTAL EQUIPMENT SYSTEMS 5287 New Kings Road Jacksonville, FL 32209 904-924-9624 www.coastalequipment system.com

CREEL TRACTOR CO. 3771 Palm Beach Blvd. Fort Myers, FL 33916 239-694-2185 Fax: 239-694-6059 www.creeltractor.com

RICHARDS TRACTOR CROSBY EQUIPMENT AND IMPLEMENTS COMPANY, INC. 1995 N.E. 8th St. Homestead, FL 33033 305-247-8711 www.ritrac.com

1826 South Peterson Ave. Douglas, GA 31535 915-384-4664

FLORIDA COAST EQUIPMENT 357 Pike Road W. Palm Beach, FL 33411 561-369-0414 694 Commerical Blvd. Naples, FL 34104 239-435-1667

631 Electric Rd. Swainsboro, GA 30401 15900 Westpark Lane 478-237-8372 Fort Pierce, FL 34945 772-461-1003 www.crosby www.floridacoasteq.com equipimentco.com

Page 42 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

LeTourneau Super C Tournapull w/Carryall Scraper, 1:50 Scale - $80

Caterpillar 330D L Excavator, 1:50 Scale - $110

Allis Chalmers HD 21 Dozer, 1:50 Scale - $100

Caterpillar D4 Tractor with 4S Bulldozer, 1:16 Scale - $200

Volvo A40G Articulated Hauler, 1:50 Scale - $120

Caterpillar 5110B Excavator, 1:50 Scale - $110

John Deere 470G LC Excavator, 1:50 Scale - $85

Caterpillar M316D Wheel Excavator, 1:50 Scale - $60

Volvo L35G Wheel Loader, 1:50 Scale - $120

Volvo L350F Wheel Loader, 1:50 Scale - $145

Komatsu D275AX-5 Dozer, 1:50 Scale - $120

International Red, White & Blue Mack Granite Mixer Truck, 1:34 Scale - $125

Caterpillar D6K XL Track-Type Tractor, 1:50 Scale - $65

Case CX250C Excavator, 1:50 Scale - $175

Grove TM1500 Crane, 1:50 Scale - $150

International Red, White & Blue Mack Granite Dump Truck, 1:34 Scale - $125

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

SECTION

Trucks & Trailers Pages 43-47

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Mack Trucks Increases Productivity, Safety With Omnitracs Mack Trucks announced an expansion of its fleet management services with the addition of Mack Omnitracs Integrated Telematics. Powered by Omnitracs LLC, a global pioneer of fleet management solutions for transportation and logistics companies, Mack Omnitracs Integrated Telematics utilizes Mack’s factory-installed telematics hardware to help boost productivity and safety by providing real-time GPS location information, as well as driver performance data. “Mack Omnitracs Integrated Telematics gives our customers a new look into their operations, enabling them to more easily see where and how their truck assets are being utilized,” said David Pardue, Mack vice president of connected vehicle & uptime services. “Applying that knowledge helps increase productivity, while also improving the safety of their drivers.” Mack Omnitracs Integrated Telematics uses Mack’s fully integrated GuardDog Connect telematics hardware to capture and relay information such as relative road speed and idling duration

and cost. In addition, the system is capable of providing analyses of driver performance based on the data and GPS information captured from the truck. Real-time email or text messages can alert customers to potential issues. “With no additional hardware required, Mack Omnitracs Integrated Telematics provides detailed fleet management data without the need to add to or modify equipment,” said Rich Glasmann, vice president of OEM strategy, sales, and marketing at Omnitracs. “This allows customers to gain even greater value from their existing hardware through data analytics.” Mack Omnitracs Integrated Telematics subscriptions are available for all new Mack Pinnacle, Granite, TerraPro and Titan by Mack models. Subscriptions for current customer vehicles also may be available. For more information, visit www.omnitracs.com/mack or Mack Trucks launched Mack Omnitracs Integrated Telematics as an expansion of its Mack www.macktrucks.com. Fleet Management Services. Powered by Omnitracs LLC, Mack Omnitracs Integrated Telematics uses Mack’s factory-installed telematics hardware to help boost productivity and safety by providing real-time GPS location information, as well as driver performance data.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Kenworth T880 Available With Allison Transmission Further enhancing Kenworth’s support of customers operating in demanding vocational applications, Kenworth has announced the availability of the 7-speed Allison 4700 Rugged Duty Series fully automatic transmission with the 116.5-in. (296 cm) BBC Kenworth T880 short hood. The Allison 4700 RDS is available with the PACCAR MX-13 engine as well as the PACCAR MX-11, which provides a 400-lb. (181 kg) weight savings over 13-L engines. The transmission improves drivability, allowing truck operators to creep slowly and perform other low-speed maneuvers. This level of control makes

the Allison 4700 RDS ideal for ready-mix applications where drivers require a truck with maximum speed control for job site maneuverability in steep and difficult terrain, or with mixer trucks that move slowly while pouring concrete for street curbs, driveways or other projects in confined spaces, according to the manufacturer. “With the Allison 4700 RDS, customers can spec a highly maneuverable mixer of any type and benefit from greater precision of concrete delivery with no shifting required, enabling ready-mix drivers to focus on the road ahead and the job site around them,” said Kurt Swihart, Kenworth marketing

director. “By coupling the Allison those equipped with dump and 4700 RDS with the PACCAR refuse bodies as well as cranes.” MX-11 and the T880 short hood, A lower first gear ratio and an truck operaoptional second “deep reverse” tors get a make the truck even more truck with maneuverable particua lighter larly on steep gross comgrades and in bination tight settings. weight and The rugged an additional and durable 6 inches of body space on Kenworth has the chassis for announced the more payload. It’s availability of the 7a great choice for other speed Allison 4700 customers who need trucks Rugged Duty Series fully automatwith increased overall ic transmission with the 116.5-in. (296 transmission ratios, such as cm) BBC Kenworth T880 short hood.

Allison transmission also features no-power interrupts, providing full power shifts and allowing full use of the engine’s horsepower. “Spec’ing an automatic transmission for tough vocational applications can also help make a Kenworth truck even more driver friendly and comfortable to operate. The Allison 4700 RDS is an important option to consider for retaining and recruiting drivers,” said Swihart. For more information, visit www.kenworth.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 44 • July 20, 2016 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Isuzu Marks 30,000th N-Series Truck Produced by Spartan Isuzu Commercial Truck of America Inc., announced that the 30,000th gasoline-powered Isuzu N-Series truck has been produced at the Spartan Motors Inc. facility in Charlotte, Mich. The truck rolled off the line on June 10, 2016. “Last April, we announced that our partners at Spartan Motors had produced their 20,000th gas-powered Isuzu truck in only four years. Now, only a year later, we celebrate another 10,000 trucks produced,” said Shaun Skinner, president of Isuzu Commercial Truck of America. “The demand for gasoline-engine low-cab-forward trucks is growing, and we’re the only brand able to meet that need. But we couldn’t do it without the performance and reliability of our Isuzu NGas truck and the tremendous build quality of the finished product, thanks to Spartan.” Assembly of Isuzu N-Series gas trucks began at Spartan in April 2011. Isuzu N-Series gas trucks are powered by a Vortec 6.0-L small-block V8 engine that produces 297 hp at 4,300 rpm and generates 372 lbs.-ft. of torque at 4,000 rpm. The powerplant is mated to a six-speed automatic transmission with double overdrive and lock-up torque converter for enhanced fuel economy and performance. An optional version of the engine is capable of being converted to run on compressed natural gas (CNG) or liquefied petroleum gas (LPG, or propane). A full range of gasoline-powered models is available: • NPR (12,000-lb. GVWR) • Single Cab in wheelbases of 109, 132.5, 150 and 176 in. (276.8, 336.5, 381 and 447 cm) • Crew Cab in wheelbases of 150 and 176 in. • NPR-HD (14,500-lb. GVWR) • Single Cab in wheelbases on 109, 132.5, 150 and 176 in. • Crew Cab in wheelbases of 150 and 176 in. “We not only offer the best gas-powered LCF truck in North America, we offer it in a wide range of configurations to meet our customers’ needs,” Skinner said. “So we expect to announce many more production milestones in the future.” For more information about Isuzu, call 866/441-9638 or visit www.isuzucv.com. For more information about Spartan Motors, visit www.spartanmotors.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The 30,000th gasoline-powered Isuzu N-Series truck has been produced at the Spartan Motors Inc. facility in Charlotte, Mich. The truck rolled off the line on June 10, 2016.

Mike Wolff, Warren Weber Join Felling Trailers Team Felling Trailers Inc., an industrial and commercial trailer manufacturer, announced Mike Wolff and Warren Weber recently joined its organization. Wolff now serves as a trailer parts sales coordinator of Felling Trailers’ parts sales & service department. Wolff comes to the company with more than a decade of related business-to-business sales and support experience. He previously worked in an AG based business as a parts manager and route specialist where he worked with business owners to implement system upgrades and repairs along with maintaining their parts and supply needs. Now with Felling Trailers’ parts & service team, Wolff provides internal and external customer support for parts, service and repair. Along with this, Wolff plays a part in maintaining Felling Trailers’ online Parts Store (http://store.felling.com/) with product updates and order fulfillment. “I had been looking for a pro-

Mike Wolff

gressive company with a team orientated atmosphere. I’ve been here now for a little over 3 months and definitely feel part of a team and am looking foward to my future with Felling Trailers,” said Wolff.

Warren Weber

Weber joined Felling Trailers as production manager, overseeing both of Felling Trailers’ manufacturing facilities in Sauk Centre and Litchfield, Minn. Weber comes to the company with

more than 20 years in product production and fulfillment experience. Previously, he worked with a major printing, imaging, and supply chain company where he worked to develop and implement

processes to improve department efficiencies in quality and production. With Weber now part of the Felling Trailers team, he will provide management and direction and coordinate production objectives and production personnel. Weber will play a key role in Felling Trailers’ target objectives as a whole to continually research and implement new technologies to reduce lead-time and increase production in the manufacturing facilities. “Mike and Warren are great additions to our team,” said Patrick Jennissen, vice president of sales and marketing at Felling Trailers. “They have both proven to be valuable team members, and we look forward to their continued growth.” For more information, call 800/245-2809 or visit www.felling.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • July 20, 2016 • Page 45

TIGER EQUIPMENT www.tigerequipment.com 4181 New Bern Hwy Jacksonville, NC 28546 910-346-1932

805 Old Roberts Rd Benson, NC 27504 919-989-0066

RING POWER CORP. 500 World Commerce Parkway St. Augustine, FL 32092 904-494-7631 www.ringpower.com Brooksville 352-797-9500

Orlando 407-856-4851

Daytona Beach 386-947-4939

Palm Bay 321-725-6420

Jacksonville 904-714-3517

Sarasota 941-359-6050

Lake City 386-755-3997

Tallahassee 850-514-1958

Lakeland 863-606-0512

Tampa 813-671-3200

Ocala 352-620-0660

800-347-6225

Nextran Truck Center

Fax: 904-354-3807

SPECIAL TRUCK SALE

2015 Low Boy Tractor, 505HP, 13 Speed, Rawhide Package, 14.6 FA, 46 Rears, Room for a Lift Axle

2016 Mack GU532, Cummins ISL Engine 345HP, Allison Auto Trans., 10 Yard Dump Body, 16500 Lb Front Axle, 23000 Lb Rear Axle

2006 Mitsubishi Fuso, 128,000 Miles, 14’ Flat Bed Isuzu NPR-HD with Tool Body, Gas

Page 46 • July 20, 2016 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • July 20, 2016 • Page 47

Power Equipment Co. 3300 Alcoa Hwy Knoxville, TN 37920 865-577-5563

1290 Bridgestone Pkwy LaVergne, TN 37086 615-213-0900

4295 Bonny Oaks Drive 1487 Rock Spring Road Chattanooga, TN 37046 Kingsport, TN 37664 423-894-1870 423-349-6111

3050 Ferrell Park Cove Memphis, TN 38116 901-346-9800

www.powerequipco.com

1545 Highway 45 Saltillo, MS 38866 662-869-0283

Atlantic Coastal Equipment Sales & Rentals 922 Longwood Drive Richmond Hill, GA 31324 912-459-1155 www.acesalesandrentals.com

Richmond Machinery 1701 Roseneath Road Richmond, VA 23230 804-359-4048 www.richmondmachinery.com

XL 80 Mini-Deck HDG Lowboy Uses 3-Beam Design XL Specialized Trailers features the XL 80 mini-deck hydraulic detachable gooseneck (HDG) lowboy in its lineup, which uses a 3-beam design to provide users with the ultimate in versatility. Featuring a loaded deck height of 12 in. (30.5 cm) with 4 in. (10 cm) of ground clearance and an empty weight that easily allows scaling to maximum payload, the XL MiniDeck HDG is now available with a capacity rating of 80,000 lbs. (36,287 kg) overall and 80,000 lbs. in 16 ft. (4.8 m) concentrated. The trailer, which is comprised of T-1 flange and 80K web, features an 11-ft. (3.3 m) long full-width platform with a low-profile hydraulic neck. This platform provides additional loading or storage space. Equipped with a Honda Power 13-hp unit, it allows the user to raise and lower the neck into one of the five ride height positions with ease. A 36-in. (91.4 cm) flip neck extension is for using a four-axle truck. The mini-deck meets bridge clearance laws without sacrificing strength. XL’s 3beam design uses a center box beam, resulting in a lighter yet strong main deck, which is only 8 in. (20 cm) tall. 4-in. (10 cm) junior I-beams on 18-in. (45.7 cm) centers join the box beam and the side rails. The design

Featuring a loaded deck height of 12 in. (30.5 cm) with 4 in. (10 cm) of ground clearance and an empty weight that easily allows scaling to maximum payload, the XL Mini-Deck HDG is now available with a capacity rating of 80,000 lbs. (36,287 kg) overall and 80,000 lbs. in 16 ft. (4.8 m) concentrated.

has steel over the center deck and apitong decking in the outer bays for added traction when loading. The 48-ft. (14.6 m) long trailer offers 28 ft. (8.5 m) in the well for maximum loading area. This trailer is equipped with customerfriendly features: 10 bent D-rings per side on the main deck plus two per side on both the upper and rear deck and two in the tail channel. It also has 4-in. tapered front

ramps, manual ride height control, LED lighting with an amber strobe, a liquid-filled air gauge, and an Air-Weigh digital scale. The XL Mini-deck is prepped for a flip axle, to add additional axles when needed to meet various regulations. “The 60 mini-decks, which we launched last year, have been very popular,” said Rodney Crim, vice president of sales at XL Specialized Trailers. “So we know building

more mini-deck solutions would also be useful for our customers. The versatility our mini-decks offer really allows them to do a lot with one trailer.” For more information, visit xlspecializedtrailer.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 48 â€˘ July 20, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ July 20, 2016 â€˘ Page 49

LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248

Link-BeltÂŽ Spin AceÂŽ Excavators are packed with all the power, productivity, DQG IXHO HIÂżFLHQF\ \RXÂśYH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV Â‡ 5RRP\ UHGHVLJQHG FDE

QUEST CONSTRUCTION EQUIPMENT, LLC www.questequip.com 10561 Airline Hwy. St. Rose, LA 70087 504-467-7663 Fax: 504-467-3722

HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458 364 Bob Jobe Rd. Gray, TN 37615 855-201-7453 10110 Roberts Way Covington, GA 30014 770-788-0888 7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955

Gonzales, LA 225-450-6425

Â‡ +LJK GHÂżQLWLRQ IXOO FRORU ĆŽ /(' PRQLWRU Â‡ &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG Ă€XLG FKHFNV Â‡ Extended service intervals

BENNETT EQUIPMENT & SUPPLY

Â‡ )RXU PRGHOV Ć? ĆŽ WR Ć? ĆŽ WDLO VZLQJV

CROSBY EQUIPMENT COMPANY, INC.

Â‡ 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV

www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664

Â‡ \HDU VXEVFULSWLRQ WR 5HPRWH&$5(ÂŒ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ <RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW

631 Electric Avenue Swainsboro, GA 30401 478-237-8372

MID SOUTH MACHINERY, INC. 3233 Highway 80 West Jackson, MS 39204 601-948-6740

Model #

Operating Weight

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

ML CRANES & EQUIPMENT www.mlcranes.com 3908 N. Graham St. Charlotte, NC 28206 877-649-7739

3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553

GS EQUIPMENT INC. 14336 Seaway Road Gulfport, MS 39503 228-867-1555

MAY HEAVY EQUIPMENT www.mayequip.com 5423 US-70 Bus. Clayton (Raleigh), NC 27520 866-629-3784

*75 X3 and 80 X3 engines are Final Tier 4

www.bennettequipment.net 1403 Piedmont Hwy. Piedmont, SC 29673 864-277-7272

www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892

GREAT SOUTHERN CONSTRUCTION EQUIPMENT www.gsequipment.net Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400

Page 48 â€˘ July 20, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ July 20, 2016 â€˘ Page 49

LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248

QUEST CONSTRUCTION EQUIPMENT, LLC www.questequip.com 10561 Airline Hwy. St. Rose, LA 70087 504-467-7663 Fax: 504-467-3722

Gonzales, LA 225-450-6425

Â‡ +LJK GHÂżQLWLRQ IXOO FRORU ĆŽ /(' PRQLWRU Â‡ &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG Ă€XLG FKHFNV Â‡ Extended service intervals

BENNETT EQUIPMENT & SUPPLY

Â‡ )RXU PRGHOV Ć? ĆŽ WR Ć? ĆŽ WDLO VZLQJV

CROSBY EQUIPMENT COMPANY, INC.

Â‡ 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV

www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664

631 Electric Avenue Swainsboro, GA 30401 478-237-8372

MID SOUTH MACHINERY, INC. 3233 Highway 80 West Jackson, MS 39204 601-948-6740

Model #

Operating Weight

Net hp @ rpm

Tail Swing

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

; 6SLQ $FH

OEV

KS # USP

Ć? ĆŽ

ML CRANES & EQUIPMENT www.mlcranes.com 3908 N. Graham St. Charlotte, NC 28206 877-649-7739

3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553

GS EQUIPMENT INC. 14336 Seaway Road Gulfport, MS 39503 228-867-1555

MAY HEAVY EQUIPMENT www.mayequip.com 5423 US-70 Bus. Clayton (Raleigh), NC 27520 866-629-3784

*75 X3 and 80 X3 engines are Final Tier 4

www.bennettequipment.net 1403 Piedmont Hwy. Piedmont, SC 29673 864-277-7272

www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892

GREAT SOUTHERN CONSTRUCTION EQUIPMENT www.gsequipment.net Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400

Page 50 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pages 51-65

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Powerscreen Marks Half Century of Serving Industry In 2016 Powerscreen marks half a century of serving the crushing and screening industry around the world. Established in 1966, Powerscreen has achieved its fivedecade legacy through industry leadership, customer input and innovation. Powerscreen was founded in 1966 under the name of Ulster Plant in Country Tyrone, Northern Ireland and today that is where the research, development and manufacturing of products continue. By the 1970’s the Powerscreen name was born. When the founders set up Powerscreen in 1966 they pioneered the concept of mobile screening, taking the machines to Powerscreen hosted a world dealer conference in Florida in 2014. A selection of dealers and customers from around the world who attended flank the “brand in the sand.”

“From Ulster Plant to serving customers around the world today, Powerscreen is the story of teamwork.” Colin Clements Powerscreen

Colin Clements, global product line director, beside a 1966 MK1 screening machine. This was the sixth machine built and remains a permanent feature at the front of the Dungannon plant.

the quarry face rather than the expensive process of moving the material to the machine. In 1969 Powerscreen exported its first machine to Sweden. Today Powerscreen has a true global presence, operating in worldwide scale in more than 80 countries. In 1966 Powerscreen employed eight people, now that figure has risen to 600 people producing a range of more than 30 machines. Powerscreen started out from mobile machines in a sand pit to

machine designs now serving quarry, mining, C&D and recycling industries globally. Powerscreen not only pioneered the mobile machine concept but also set new standards for many products and technologies that have become widely adopted in the industry, including the Chieftain and Warrior ranges of mobile screens. In 2015 Powerscreen launched the Warrior 600, making the Warriors the most comprehensive range of mobile scalping units in the industry, according to the manufacturer. “From Ulster Plant to serving customers around the world today, Powerscreen is the story of teamwork. Our customers have trusted us and helped us to build and define the industry, as well as creating ways for people to work safely. It is through teamwork that we will continue to find new solutions and opportunities” said Colin Clements, Powerscreen product line director. In the last 50 years, Powerscreen has gone above and beyond in its

product development efforts, focusing on what customers need to be successful in their industries and applications — Powerscreen innovations are changing the market and setting the industry standard for quality, reliability and safety in crushing and screening equipment, according to the manufacturer. Key to the success of the Powerscreen brand is the global distribution network — there are more than 120 distributors operating globally providing local service and support service to end users. Pat McGeary, Blue Group chairman, said “Powerscreen is in my blood, I joined in 1968 when it was just a little local factory and today its part of my family’s life. I am proud to have been part of the success story and to see the passion and dedication that was there when I joined is still there today.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 52 • July 20, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CLEAR THE W WA AY

FROM OUR SIGNA SIGNATURE ATURE TURE BULL HO HOG, OG, TO TRACKED CAR CARRIERS, RRIERS, TO FORESTR FORESTRY RY A ATT ATTACHMENTS, TTTACHMENTS, W WE HA HAVE AVE VE A RUGGED, DURABLE PRODUCT FOR EVER EVERY Y APPLICA APPLICATION. PPLICA ATION. TION. BUIL BUILT LTT BRUT B BRUTALLY TALL ALLLY TOUGH AND OPERA OPERATOR-FRIENDLY, ATOR-FRIEND TOR-FRIENDL DLLY, SO YOU CAN CLEAR CLEAR THE W WA WAY AY TO A JOB J WELL DONE.

800.528.3113

fecon.com

CRUSHING PLANTS

We Call It EXPERTISE. You Call It PEACE OF MIND.

SCREENING Plants

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers. For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w. i r o c k c r u s h e r s . c o m

Closed-circuit PLANTS

Crush. Classify. Profit.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 20, 2016 • Page 53

What Difference Does 6 6”” TONS! ON NS! Make? In A Word ...... TON

On a good day, you crank out a couple thousand tons of crushed product. But what if the crusher jams? Shutting down the entire operation to remove lodged material takes at least an hour. That’s more than 10% of your output for the day with each occurrence.

Patented Crusher Relief System™

Only Screen Machine Crushers rushers offfer fer our patented Crusher Relief System.™ It lets you raise the crusher lid and aprons up to 6” while the machine is operr-ating. The result? Fewer jams, less downtime and more productivity. It’s just another way Screen Machine products help you Crush Every Job.™

™

5256T T Crusher

CST T Crusher

JHT T Crusher

516T T Spyder

514TS Spyder

107T T Scalper

American-Made Innovation Since 1966

800-83 800-837-3344 7-3344

7740-927-3464 40-927-3464

email@screenmachine.com

See how it works at www.screenmachine. www.screenmachine.com com

Page 54 • July 20, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Screen Machine Celebrates 50th Anniversary in a Big Way

hen it’s time to celebrate a 50th Anniversary, you do it in a big way. At Screen Machine, that means debuting about 75 tons of new machinery and welcoming nearly 700 guests for the day. On June 23, Screen Machine invited dealers, suppliers, local, state and federal officials, families of employees and other special guests to its 125,000-sq. ft. facility in Etna, Ohio. It was a day to celebrate a great American success story, and to look ahead to a bright future. “Fifty years is a long time,” said President Steve Cohen. “Screen Machine Industries not only survived but prospered through many recessions and wars. A business must adjust to survive.” In testament to the company’s plans to not only survive, but thrive, in the years to come, Screen Machine debuted two new machines at the 50th anniversary celebration: • 4043TR recirculating impact crusher — featuring a two-deck screen fed directly from the crusher, the 4043TR delivers sized product directly from the fines (front) conveyor. Meanwhile a return overs conveyor delivers larger product back to the crusher hopper. • 514TS3 Spyder — A triple-deck screen that delivers up to four products simulta-

neously — fines, small mids, large mids and overs. “These machines are all about efficiency,” said Doug Cohen, vice president of operations. “The 4043TR allows the operator to produce crushed and sized product from a single machine. The return conveyor ensures the product keeps recirculating until it is reduced to the desired size. The 514TS3 adds an additional deck to our mid-priced screening plant.” In addition to seeing these two new machines, 50th anniversary attendees enjoyed factory tours led by Screen Machine engineers, were able to “drive a Screen Machine” scalper, had a chance to run a hoist, could visit the “I Make America” interactive game and had an opportunity to view a crushing and screening demonstration. A barbeque lunch also was provided. During a brief lunchtime presentation, Screen Machine Founder Bernard Cohen recalled that his accountant told him 50 years ago that nine out of 10 business failed in their first three years. “I wonder what he would say today about our Jason Clark (L) of ICS Materials company,” said Cohen. came in from Naples, Fla., to

(L-R): Murrysville Machinery Company’s Will Sutter, Pat McBroom, Denny Burt and Doug Caylor, along with Screen Machine’s Tim Miller and Murrysville Machinery Company’s Rod McMahon and Sam Stimmel, enjoyed the 50th anniversary celebration.

(This story also can be found on Construction join his brother, Brett Clark of Equipment Guide’s website at www.construc- Green Lighting Wholesale, for the event. tionequipmentguide.com.)

Live equipment demonstrations were conducted throughout the day during the event.

The Association of Equipment Manufacturer’s Kip Eideberg was on hand with the assocation’s traveling interactive educational game trailer to promote the “I Make America” campaign.

(L-R): Mike Thurman of Screen Machine Industries discusses the 5256T portable Impact Crusher with Paul Ford, Keith Hensel and Zane Luttrell of Power Equipment Company.

Screen Machine Industries President Steve Cohen (L) and Vice President of Operations Doug Cohen (R) are congratulated by Treasurer of Ohio Josh Mandel.

Screen Machine’s Wayne Ellison (2nd from L) demonstrates the remote control capabilities of this 612T portable trommel screen for (L-R) Ohio Manufacturers’ Association’s Daniel Noreen and Eric Burkland; Ohio CAT’s Tony Skaggs; and Caterpillar’s Allison Pepper.

Screen Machine models produced with a 3D printer were on display at the event.

(L-R): Ohio CAT’s Ned Herald joined Tory Williams and Dennis Howard of RDO Equipment at the event.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 20, 2016 • Page 55

www.thompsonmachinery.com Camden, TN • 731-584-2732 Clarksville, TN • 931-552-5496 Columbus, MS • 662-327-3083 Cookeville, TN • 931-646-3200 Greenwood, MS • 662-453-5233 Jackson, TN • 731-988-4240 La Vergne, TN • 615-256-2424 Manchester, TN • 931-461-5000 Memphis, TN • 901-332-3051 Tupelo, MS • 662-844-1634

INVESTED IN THE SUCCESS O YOUR OF UR BUS BUSINESS. SINESS

www.thompsontractor.com Birmingham, AL • 205-841-8601 Dothan, AL • 334-671-1040 Huntsville, AL • 256-532-1776 Mobile, AL • 251-626-5100 Montgomery, AL • 334-215-5000 Oxford, Anniston, AL • 256-831-4104 Panama City, FL • 850-785-4007 Pensacola, FL • 850-471-6700 Shelby County, AL • 205-664-4833 Tuscaloosa, AL • 205-247-2800

louisianacat.com Alexandria, LA • 318-443-2577 Bossier City, LA • 318-746-2341 Hammond, LA • 985-340-2820 Lafayette, LA • 337-837-2476 Lake Charles, LA • 337-439-3601 Monroe, LA • 318-323-1345 Prairieville, LA • 225-673-3480 Reserve, LA • 985-536-1211

www.ringpower.com Daytona Beach, FL • 386-947-3363 Gainesville, FL • 352-371-9983 Lake City, FL • 386-755-3997 Lakeland, FL • 863-606-0512 Ocala, FL • 352-732-2800 Orlando, FL • 407-855-6195 Palm Bay, FL • 321-952-3001 Riverview, FL • 813-671-3700 St. Augustine, FL • 904-737-7730 Sarasota, FL • 941-359-6050 Tallahassee, FL • 850-562-2121

A DEEP CONNECTION TO THE SUCCESS OF YOUR BUSINESS. www.kellytractor.com 8255 NW 58 Street Miami, FL 33166 888-502-8033 • 305-592-5360 Davie, FL • 954-581-8181 West Palm Beach, FL 561-683-1231 Clewiston, FL • 863-983-8177 Fort Myers, FL • 239-693-9233

For more information visit Cat.com

© 2016 Caterpillar • All Rights Reserved • Printed in USA CA AT, CATERPILLAR, BUILLT T FOR IT T,, their respective logos, s, “Caterpillar YYellow ellow,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 56 • July 20, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Expands New 6204QF Four-Deck Screen Offerings With N Raises Production at Lower Cost Series Products Metso has expanded its offering for the scrap metal recycling industry with the new Metso N Series products. With this expanded range of products, Metso aims to satisfy the requirements of small, medium and larger processors in the industry. The N Series products include shears and balers, which are solidly engineered, robust, cost efficient, production and maintenance friendly and which have been field proven in the scrap industry, according to the manufacturer. All equipment features remote access to expedite customer assistance when needed. The whole product range is backed by a full scope of services from Metso. “The ever-changing demands of the scrap processing industry require a bigger choice of solutions capable of meeting specific capacity needs, and we are responding by introducing the N-Series. Our new product range offers reliable technology, efficiency and safety, yet all the features necessary to meet processing needs at competitive price levels. Regardless of the size of our customer’s business, big or small, we strive to be at the forefront in providing the technology and services needed to ensure success,” said Daniel Zeiler, vice president technology and capital equipment, metal recycling, Metso. Compact Equipment Range Backed By Services The N Series consists of NIS inclined shears, NCS shearbaler-loggers, NLB lid balers and NTB triple compression balers, which can be complemented with customized service agreements. The NIS inclined shear is a gravity feed shear that can accept long material and large bulky scrap; it is available with cutting forces from 661 to 1,378 tons (600 to 1,250 t). The NIS is a self-contained unit and easy to install. The NCS shear-baler-logger has a true clamshell chargebox design with high compression forces for faster trapping and folding. The multi-use machine is available with cutting forces from 661 to 1,102 tons (600 to 1,000 t). The NCS is a self-contained unit that offers diesel drives and lifting jacks as options for transportable models. The NLB lid baler is a compact baler for small to mid-size metal baling requirements, producing no. 1 bales in 11.8 by 11.8 in. (300 by 300 mm), 15.7 by 15.7 in. (400 by 400 mm) and 23.6 by 23.6 in. (600 by 600 mm). The NTB triple compression baler is a high production baler that produces no. 1 bales from diverse feed materials. Bale sizes are available at 11.8 by 11.8 in. and 15.7 by 15.7 in.“The new N Series product portfolio is fully backed by Metso’s worldwide service network. The service contact is locally available to our customers so that they have efficient direct support when required. The Metso service team is available for onsite assistance for installation, trouble-shooting, training and other customer requirements. All Metso equipment features remote access to the PLC control systems to expedite customer assistance when necessary,” said Claude Lovrinovic, product manager, metal recycling, Metso. For more information, visit www.metso.com/metal-recycling.

The 6204QF Screen is the latest addition to the Q Series of four-deck screens that is designed to increase production at a lower cost. Developed for a variety of wet and dry applications, including sand and gravel, shot rock and recycle, the 6204QF screen provides the same aggressive and efficient screening action as KPI-JCI and Astec Mobile Screens’ triple-shaft horizontal screen. The new portable screen offers 33 percent more screening area than a standard 6203LP screen, allowing for increased production at a lower cost when compared to adding additional screens and support equipment, according to Ian Pendergrass, product development manager of KPI-JCI and Astec Mobile Screens. Additionally, the screen is capable of making additional products or adding efficiencies by load-relieving the product-sizing decks in the same footprint. “We couldn’t be more excited about the launch of our new four-deck product line,” Pendergrass said. “A four-deck horizontal screen is a unique tool for the industry and we believe it fulfills a void in the industry.” The 6204QF features an adjustable stroke length of 7/16 to ½ in. (1.1 to 1.2 cm), adjustable stroke angle of 30 to 60 degrees, and an adjustable speed range of 675 to 975 rpm. The screen offers a maximum top deck opening of 2 ½ in. (6.3 cm) and maximum feed size of 8 in. (20 cm).

Developed for a variety of wet and dry applications, including sand and gravel, shot rock and recycle, the 6204QF screen provides the same aggressive and efficient screening action as KPI-JCI and Astec Mobile Screens’ triple-shaft horizontal screen.

In addition to the 6204QF, KPI-JCI and Astec Mobile Screens also offers the 8244Q as part of the Q Series. For more information, visit kpijci.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Bandit Industries Welcomes John Mocny as Chief Executive Officer

Bandit Industries has hired John Mocny to serve as the company’s chief executive officer. Mocny joined the Bandit team in February 2016, bringing decades of engineering and management experience from previous leadership roles with General Motors and Caterpillar. Bandit owners Mike Morey Sr., Dianne Morey and Jerry Morey remain involved with the operations and management of the company. Jerry Morey continues to serve as president of Bandit Industries. “We decided to bring in a CEO to take better advantage of the opportunities before us, and to help take Bandit to another level,” said Jerry Morey. “It was important for us to find someone with exceptional leadership experience, but also someone who understands the manufacturing side and can relate to our customers. John is also a Michigan native, and he shares the pride we have in our community (This story also can be found on Construction Equipment and our state. He’s a down-to-earth leader and with him on-board, Bandit Guide’s Web site at www.constructionequipmentguide.com.)

Bandit Industries has hired John Mocny to serve as the company’s chief executive officer.

is poised to have our best year ever in 2016.” “The Morey family has built something special with Bandit Industries,” said Mocny. “The company culture and pride that exists here is incredible, and it’s infectious. It’s easy to see why owners and crews are proud of their Bandit equipment, and I’m grateful to

be a part of it all. Building on Bandit’s success will be a continuing journey of sustainable growth. It’s a journey I’m looking forward to taking.” For more information, visit www.banditchippers.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 20, 2016 • Page 57

GROUND UP

PURPOSE-BUILT FROM THE

What if your purpose for a purpose-built scrap handler isn’t quite the same as the other guy’s purpose? Only SENNEBOGEN scrap handlers are purpose-built one machine at a time to meet your goals.

Maximum Throughput • Built-in Safety

• Diesel and electric-drive machines from 44,000 to 750,000 lbs. • Full range of rubber tired, tracked and stationary models with customized boom & stick configurations.

Think of the possibilities! See how SENNEBOGEN can purpose-build the right machine for you at www.sennebogen-na.com/scrap

www.sennebogen-na.com | +1-704-347-4910

TRACTOR & EQUIPMENT CO. Alabaster, AL 205-621-2489 Anniston, AL 256-831-2440 Birmingham, AL 205-591-2131 Decatur, AL 256-355-0305 Dothan, AL 334-678-1832 Mobile, AL 251-457-8991 Montgomery, AL 334-288-6580

Shoals Area, AL 256-383-5666 Tuscaloosa, AL 205-752-0621 Panama City, FL 850-763-4654 Pensacola, FL 850-505-0550 Albany, GA 229-435-0982 Atlanta, GA 404-366-0693 Augusta, GA 706-798-7777 www.tractor-equipment.com

Calhoun, GA 706-879-6200 Columbus, GA 706-562-1801 Hoschton, GA 706-654-9850 Kennesaw, GA 678-354-5533 Macon, GA 478-745-6891 Savannah, GA 912-330-7500

POWER EQUIPMENT COMPANY Knoxville, TN 865/577-5563 LaVergne, TN 615/213-0900 Chattanooga, TN 423/894-1870 Kingsport, TN 423-349-6111 Memphis, TN 901-346-9800 Saltillo, MS 662-869-0283 www.powerequipco.com

ATLANTIC EQUIPMENT & SUPPLY Hampton, VA 23661 757/827-4778 800/325-0461 www.aeandsupply.com

ASC CONSTRUCTION EQUIPMENT USA, INC. Asheville, NC 828-687-0620 Charlotte, NC 704-596-8283 Greenville, NC 252-754-5280 Raleigh, NC 919-661-8710 Charleston, SC 843-414-1120 Columbia, SC 803-791-0740 Piedmont, SC 864-704-1060 www.ascvolvo.com

GS EQUIPMENT INC.

LYLE MACHINERY

Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Fort Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892

Jackson, MS 800-898-4000 Fax: 601-939-8440 Gulfport, MS 228-832-7575 Hattiesburg, MS 601-296-7556 Magnolia, MS 601-783-2111 www.lylemachinery.com

GREAT SOUTHERN CONSTRUCTION EQUIPMENT Jacksonville, FL 904-268-4400 Orlando, FL 407-859-9160 www.gsequipment.net

Page 58 • July 20, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

HIGH-QUALITY MACHINES AND PRODUCT SUPPORT

Get high-quality Stowers Machinery Coverage Area for Screen Machine Screen Machine products, plus topnotch parts and service support, from Stowers Machinery Corporation throughout the state of Tennessee and in southeastern Kentuckyy, southwestern Virginia, western North Carolina, northern Georgia, and northeastern Alabama. Offering equipment made in the USA from Screen Machine Industries is another way that Stowers Machinery helps you acquire the equipment you need. Visit our website at screenmachine.stowerscat.com or call us to learn how Stowers and Screen Machine can add value to your business.

Call toll-free 800.362.9690 © 2016 Stowers Machinery Corporation. All rights reserved. © 2016 Caterpillar. All rights reserved. CA ATT, CA ATERPILLAR, TEERPILLAR, BUILLTT FOR ITT,, their respective logos,“Caterpillar logos,“Caterp pillar Yeellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

RTEX Breakers Boast Less Air, Fuel Consumption Atlas Copco’s RTEX pneumatic breaker offers rental centers and contractors a cost effective and powerful solution for a variety of demolition projects. The RTEX requires just 37 cfm to operate, about 50 percent less air energy than conventional breakers in the same weight class. This gives contractors the option to run multiple breakers off a compact air compressor, resulting in greater efficiency and a high return on investment, according to the manufacturer. “Contractors will notice the RTEX difference after one use. Since the RTEX air consumption is essentially cut in half, contractors are able to run two 60-pound RTEX breakers off a 90-cfm compressor,” said Gus Armbruster, Atlas Copco handheld construction tools product manager. “This not only saves on rental or ownership costs on a small compressor, but also on fuel consumption without sacrificing breaking power.” The RTEX has the breaking capacity of a 66-lb. (30 kg) breaker or greater, but weighs only 55 lbs. (25 kg). Its Sofstart two-step trigger lets the operator start the breaker slowly for full control over the chisel’s starting position and placement. The RTEX operates with a constant pressure control that features improved energy transfer from the breaker to the new RHEX power chisel. The RHEX chisel generates a powerful breaking force and features a concave tip profile to significantly reduce jamming and promote operator productivity. The constant pressure chamber sits at the top of the breaker and serves as an advanced pneumatic suspension, which minimizes vibrations. Since the constant pressure chamber sits at the top of the breaker there is no need for ergonomic handles — vibration values are

Atlas Copco’s RTEX pneumatic breaker offers rental centers and contractors a cost effective and powerful solution for demolition, maintenance and renovation projects.

comparable to a conventional breaker with flexible and vibration-reducing handles. This enhances operator comfort and allows the operator to work as much as eight times longer than with conventional breakers, according to the manufacturer. The breaker’s minimal vibrations also minimize stress on its internal components, which means fewer spare parts replacements and less maintenance. The RTEX features a long piston design that delivers double the interaction time — 100 milliseconds — of the tool with the surface than conventional pistons. This results in higher impact energy per blow and faster results than what can be achieved with conventional breakers in the 60-lb. weight class. In a conventional breaker, air discharges each time the acting piston moves up or down. In the RTEX breaker, the air discharges only once — on the piston’s return stroke, in which the constant pressure from the chamber pushes the piston down. Minimum valuable air is consumed, contributing to the high efficiency of the stroke mechanism. For more information, call 800/7326762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 20, 2016 • Page 59

THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO

MC 110 Zi EVO Continuous Feed System

MC 110 Ri EVO High-tech jaw crusher

Direct drive via fluid clutch

High production, quality product with maximum efficiency, the all new Kleemann EVO jaw crusher.

ROAD AND MINERAL TECHNOLOGIES

www.wirtgenamerica.com

Page 60 • July 20, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Maximized Uptime…

Terex Cedarapids CRH1313R Screen Plant Proves Versatile The Terex Cedarapids CRH1313R delivers big production and has the versatility to handle rock crushing, concrete recycling and asphalt recycling. The highly mobile plant is a complete stand-alone closed-circuit unit with three product capability, and features a high production Cedarapids IP1313 impactor with a 3 or 4 bar 50 in. (127 cm) rotor powered by a Tier IV, 450 hp (335 kW) diesel engine, direct drive to crusher, and 200 hp (150 kW) generator. Uptime is maximized with a heavy-duty undercrusher pan feeder that protects the conveyor belt from damage by absorbing the high velocity discharge from the crusher. More capacity is possible because of the 5 by 16 ft. (1.5 by 4.8 m) dual-slope 2-deck screen, which handles heavier loads. In addition, the capability to return both screen deck products to the crusher maximizes production. A rugged 48 in. by 16 ft. (122 cm by 4.8 m) highstroke Cedarapids “Advantage” feeder with 60 in. (152.5 cm) grizzly bar or optional stepped tine style grizzly section feeds the impactor. The CRH1313R portable impactor/screen plant is simple to operate, quick to set up, and easy to transport. For more information, visit www.terexmps.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The Terex Cedarapids CRH1313R plant is a complete stand-alone closed-circuit unit with three product capability, and features a high production Cedarapids IP1313 impactor with a 3 or 4 bar 50 in. (127 cm) rotor powered by a Tier IV, 450 hp (335 kW) diesel engine, direct drive to crusher, and 200 hp (150 kW) generator.

Keep Your Finger on the Pulse Geith Announces GT Series With Powerscreen’s Digital Tools Technology is driving improvements in all aspects of our lives. With Powerscreen Pulse, Powerscreen is continuing this revolution by bringing new digital tools to help improve crushing and screening operations. David Gunn, commercial service manager at John Gunn and Sons Ltd, said “Powerscreen Pulse is extremely user friendly, easy to access and a very valuable management tool for the quarrying industry. With the Pulse system I can monitor the location of machines and check the hours on the machines. The system also always me to see live information and monitor urea levels, CSS, tramps, feeder starts, fault codes and any warnings.” “No matter where you are in the world, Pulse lets you stay on top of production by giving you accurate up to date information direct to your PC, tablet or smartphone. We’ve taken a lot of time to get the system to perform exactly as customers want; so that this robust platform will generate massive cost and time savings for equipment owners and operators alike,” said Powerscreen Product Line Director Colin Clements.

Powerscreen Pulse allows you to: • View accurate information on production tonnages, fuel usage and fuel costs per ton • Receive alerts for alarms, for rapid response to production issues • Check at a glance the status and key information of all machines in your fleet • Identify cost savings using in depth stats and analytics • Optimize your fleet planning based on idle/working time information • Track engine hours to plan servicing to minimize downtime • Monitor wear rates to anticipate replacement parts • Track machine locations anywhere in the world • Receive alerts when your machine is operated outside of set hours or locations For more information, visit www.powerscreen.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Geith GT Series concrete crushers process concrete and cut rebar without requiring additional hydraulics — ideal for safe, quiet and controlled demolition of roads, buildings, bridges and foundations, according to the manufacturer. The GT Series consists of seven concrete crusher models designed with abrasionresistant, high-tensile strength steel and wear-resistant alloy pivot bearings for an extended service life. Fitted with replaceable shear blades for cutting rebar and pin-on jaws, the GT Series concrete crushers deliver enhanced durability and performance in severe applications. Geith GT Series concrete crushers are available with additional base plates for mounting on various machines weighing between 14,000 and 180,000 lbs. (6,350 and 81,647 kg). For more information, visit www.geith.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 20, 2016 • Page 61

Terex® Minerals Processing Systems

Terex Cedarapids CRC450X

Game Changing Modular,Portable & Static Powerscreen Mid-Atlantic supply Terex Cedarapids & Terex Simplicity equipment to the Carolinas and Virginias. Contact Your Local Powerscreen Mid-Atlantic Dealer Powerscreen Mid-Atlantic, Inc, PO Box 2505, Kernersville, NC 27285 T: 1-800-797-7276 E: sales@powerscreenmidatl.com W: www.powerscreenmidatl.com

Terex Simplicity M Series

Page 62 • July 20, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Cat 816K Landfill Compactor Features C7.1 ACERT Engine The Cat 816K landfill compactor builds on the established performance, durability and reliability that the model 816 has demonstrated since 1972. The new K Series model, designed with heavy-duty main structures that support multiple life cycles, features a fuel-efficient Cat C7.1 ACERT engine, single-lever steering, pressurized cab and wheel/tip options that provide extended service life. Available Cat Compact Technologies, such as compaction control, further enhance compaction performance and consistency by providing accurate compaction values and 3D mapping, according to the manufacturer. Structures/Guarding/Wheels/Tips The foundation of the 816K’s purposebuilt design is its massive, robotically welded main structures, featuring a full box-section rear frame that resists torsional shock and twisting forces, heavy-duty steering cylinder mounts to efficiently transmit steering loads into the frame, and an axle-mounting design that is optimized for increased structural integrity. Three new wheel and tip configurations allow matching the 816K to the application. The paddle tip reduces weight and provides high performance with reduced fuel burn.

The left pedal serves as a brake, transmission neutralizer, and decelerator that overrides the engine-speed setting. The operator’s environment is kept clean via filtered air that pressurizes the cab, and temperature is maintained with an automatic climate-control system. The cab is isolationmounted to reduce vibration, and operator comfort is enhanced with an air-suspension seat or the available Cat Comfort Series III seat. Back-lighted membrane switches have LED indicators and ISO identification, and a standard rearview camera system enhances operator awareness. The new K Series model, designed with heavy-duty main structures that support multiple life cycles, features a fuel-efficient Cat C7.1 ACERT engine, single-lever steering, pressurized cab and wheel/tip options that provide extended service life.

The plus tip provides increased side-slope stability, and the combination tip provides an effective compromise of performance, fuel economy and side-slope stability. In addition, specialized guarding protects components from damage, debris accumulation, chemicals and premature wear, including axle guarding that prevents material from wrapping and binding around the axles. The transmission oil tube is guarded and the fuel tank is positioned away from debris in the front frame. A screened air inlet

for the radiator is placed high at the rear of the machine to prevent debris from blocking airflow, and the grille’s design allows trash to fall away. Striker bars are designed to keep wheels free of debris and optional cleaner fingers are available for use in cohesive soils and in material that packs between tips. Power Train The C7.1 ACERT engine meets U.S. EPA Tier IV Final/EU Stage IV emissions standards with advanced technologies that do not interrupt the machine’s work cycle. (A Tier III/Stage IIIA equivalent configuration is available in certain areas.) The Cat Next Generation high-pressure/common-rail fuel system delivers fuel in a precise series of micro-bursts during each cycle, providing extremely efficient combustion, and control systems lower the engine’s average working speed for reduced heat loads and added fuel efficiency. An engine-idle-shutdown system saves fuel by eliminating excess idling. The 816K’s Caterpillar built planetary power-shift transmission features special metallurgy and gear heat-treating to ensure long-term durability. The transmission’s advanced productivity electronic control system (APECS) is designed to improve transmission shifting performance, provide a higher level of operator comfort, and increase production. Heavy-duty planetary axles complete the power train, the front is fixed and the rear oscillates ± 6 degrees. Operator’s Environment The 816K’s Cat STIC steering and transmission integrated control combines steering and transmission control (directional and gear selection) into a single lever. Simple side-to-side movements of the low-effort lever provide precise steering maneuvers through 42 degrees of articulation right and left. Electro-hydraulic implement controls use soft detents, and cylinders use electronically controlled stops for smooth operation.

Serviceability and Sustainability Routine service points for the 816K, including grease fittings, are grouped for convenience and reached from ground level via swing-out doors or from non-slip platforms. A ground-level service panel includes a master disconnect switch with integrated lock-out/tag-out, DEF purge lamp for Tier IV Final/Stage IV machines, circuit breakers, fuel-shutoff switch, and jump-start receptacle. Ecology drains help prevent spills and side doors facilitate cleaning of the cooling system. The 816K is designed for multiple machine lives and component rebuilds utilizing Caterpillar sustainable options such as the Reman and Certified Rebuild programs. These options could save a customer up to 70 percent of purchasing a new comparable machine by reusing components or replacing with manufactured components, according to the manufacturer. Cat Connect Technology The Cat vital information management system (VIMS) notifies operators and technicians about potential problems, allowing issues to be resolved quickly, preventing unscheduled downtime. In addition, Cat LINK technologies wirelessly provide equipment managers with critical information, via the VisionLink interface, including machine location, hours, fuel usage, idle time and event codes. Cat Compact technologies combine advanced compaction measurement, in-cab guidance, and reporting capabilities to help consistently meet compaction targets, uniformly, in fewer passes, saving rework time and fuel. The factory-installed Cat compaction control system measures compaction values and provides 3D pass-mapping guidance that indicates when layers have reached optimum density. Mapping helps eliminate voids, optimizes cell space, and documents results. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 20, 2016 • Page 63

CRUSHING

MATERIAL MA ATERIAL HANDLING HAN

SCREENING

TRACKS

www.highway-equipment.com g y q p

www.stoneequipmentco.com q p

WASHING W ASHING & CLASSIFYING CL www.kellytractor.com y

Orlando, FL L 32824-8728 32824 8728 407 850 9614

Jacksonville, FL L 32207 904 737 6000

Lake City, FL 32024 386 758 7444

ZZZ ÀDJOHUFH FRP J

The complete source for equipment in the aggregate, construction and recycling industries. Offering industry-leading brands such as the Vanguard Jaw Crusher, Kodiak® Plus Cone Crusher, SuperStacker® Extendable Stacker, ProSizer® Mobile Screening Plant, Combo® Screen, Vari-Vibe® High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, Global Track and FastPack.

www.kpijci.com

Page 64 • July 20, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Sennebogen 821 M Electric Material Handler Offers Mobility The advantages of an electric material handler combined with the flexibility of a mobile machine is what the Sennebogen 821 offers with its integrated powerpack. At first glance, the Sennebogen 821 M “E” appears to be an ordinary material handler. However, as soon as the operator turns the key, you hear the difference. Or, rather, you don’t — the quiet 90 kW electric motor starts up and goes to work. It’s only then you notice the cable plugged into the undercarriage. Since the Sennebogen 821 now working at the MEAB waste recycling center is primarily used indoors, the site’s decision-makers had quickly opted for electric drive. In addition to low operating and service costs, the electric machine eliminates any need for exhaust treatment and particulate filters in the work zone. The electrical power itself is environmentally friendly, generated just a Sennebogen’s new 821 mobile electric material handler combines an enerfew meters away using landfill gas. gy-saving electric drive with extreme flexibility and mobility. A diesel

warm welcome from American waste-processing facilities. “Electric drive machines are increasingly popular throughout the industry,” he said. “But many centers require the versatility of a mobile machine to support operations in different areas of the facility — loading trucks at one time, sorting piles or feeding grinders at another. With an integrated powerpack, the 821 Electric increases the utilization of the machine, which increases the ROI.” This concept that combines the greatest mobility with the advantages of an electric drive was developed by Sennebogen. Instead of a counterweight, the rear of the material handler contains a powerful diesel powerpack. This provides the power to the motor. As well, it has been designed to allow all of the hydraulic functions to be operated when on the powerpack mode. With just a few steps, the electric machine can be driven anywhere without having to worry about being tethpowerpack in the rear ballast supplies power to the electric motor when ered to its power supply. On-Board Powerpack: Due to the integration of the powerpack into the the 821 is disengaged from its electrical cable to travel independently. Just Unplug and Go counterweight, the 821 remains exceptionally The advantages of electric drive are widely maneuverable and compact, and fully utilizes its known, but the next notable feature of this unit is more of a Then he just switches the motor to diesel mode and the waste strengths as an expert recycler, according to the manufactursurprise. MEAB requires the machine to be driven quickly handler is ready to roll. er. out of the recycling bay and relocated for other duties. When For more information on the full line of Sennebogen green A Better Return on Recycling Investment it’s time to move, the operator simply removes the large line material handlers, visit www.sennebogen-na.com. According to the President of Sennebogen LLC, (This story also can be found on Construction Equipment plug, rolls the power cable up on the drum and starts the diesel powerpack that’s built into the 821’s counterweight. Constantino Lannes, the plug-in 821 can look forward to a Guide’s Web site at www.constructionequipmentguide.com.)

ISRI Attendees Get First-Look at Future Fuchs Cab Design ISRI delegates were among the first to see the future oper- and give the cab a more spacious feel. The roof’s substan- grouped on the right- and left-hand joysticks, control cab eleator control center for Fuchs material handlers. The sleek tially larger glass viewing area provides improved visibility vation, grapple slewing, slewing brake, magnet and turn signew cab design incorporates more glass to advance visibili- of the load through the top of the cab. nal, among other functions. Proportional control of the main ty, new steering control for improved maneuverability and The dual joystick machine controls inside the cab are attachment function — open, close and turning — delivers revised interior for more space and greater operator comfort. designed specifically for material handling functions to precise handling of the load to increase productivity. The The new cab design will begin to make its appearance on advance operator efficiency. Fingertip buttons, conveniently main 7-in. multi-function touchscreen display provides simFuchs material handlers starting in the fourth ple, intuitive handler operation, while a secquarter of 2016. ond color display shows video captured by Similar to the machines, the new cab is the rear- and side-view night vision cameras. specially designed for the harsh scrap, recyExtra creature comforts designed into the cling, logging, waste and port applications new Fuchs cab further advance operator faced by Fuchs purpose-built handlers. A sigcomfort and productivity over extended nificant departure from all previous cab shifts. Standard heating and air-conditioning designs, the new Fuchs cabin boasts joystick help keep the operator comfortable inside of steering control that delivers improved steerthe cab regardless of ambient conditions. ing responsiveness for enhanced maneuverThe heated and air-cushioned operator comability. This removes the steering wheel and fort seat features integrated headrest, seat console from in front of the operator to vastbelt, lumbar support, multi-purpose seat ly improve visibility in front of the machine adjustment options and armrests. The and increase leg room for greater operator advanced design of the new cab makes this comfort. Should a customer want the steerone of the quietest Fuchs cabs ever proing wheel, it can be added as an option. duced. Cab configuration also includes mulThe Fuchs cab of tomorrow incorporates tiple cup holders and a cooled storage comsignificantly more glass surface area into the partment for lunch, beverages and medicine. front, top and sides of the structure for For more information, visit www.tereximproved viewing of the work area. A sliding fuchs.com. glass door affords easy entry to the cab for (This story also can be found on operators. Built with triple-layer glass and a The sleek new cab design incorporates more glass to advance visibility, new steerprotective film, the front window features a ing control for improved maneuverability and revised interior for more space and Construction Equipment Guide’s Web site at negative angle slope to improve visibility greater operator comfort. www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 20, 2016 • Page 65

You Des Deser serve the Best. Beest From our most compact stump grinders and hand-fed chippers through our largest whole tree chippers and The Beast® recyclers, Bandit® equipment is built to make you money. We reduce your costs by maximizing fuel efficiency and reducing downtime. And we increase your income by producing the highest quality end product for your market. Bandit builds the best hand-fed chippers, stump grinders, whole tree chippers, The Beast recyclers, track carriers and skid steer attachments in the industry. And equally as important... Bandit Builds Your Bottom Line.

www.banditchippers.com | 1.800.952.0178 | Remus, MI - USA VISIT YOUR NEAREST AUTHORIZED DEALER ER LOCA ATION TION

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

STOWERS MACHINERY CORP www.bandit.stowerscat.com

Knoxville, TN (East) Knoxville, TN (West) Chattanooga, TN Kingsport, TN Crossville, TN Sevierville, TN

(865) 546-1414 (865) 218-8800 (423) 698-6943 (423) 323-0400 (931) 484-4040 (865) 595-3750

of Jacksonville

BOBCAT OF JACKSONVILLE www.bobcatjax.com

11657 Phillips Hwy Jacksonville, FL 32256 (904) 288-9181 (904) 288-9182 Fax (877) 213-9408 Toll Free

ACT CONSTRUCTION EQUIPMENT www.actconstructionequipment.com Charlotte, NC Winston-Salem, NC Wilmington, NC

(704) 323-7934 (336) 397-5000 (910) 254-3525

Page 66 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hoar Construction Serves as General Contractor on Phase I COLUMBIA from page 1

success and encourage engagement. The old campus was a worn out building in which quality teaching was occurring. The community, while proud of the success in education occurring at Columbia State, was not proud of the image projected by the old facility. The students, the faculty, the college and the community deserved better. Smith said the new campus will generate income, support local jobs, sustain a skilled workforce, increase the lifetime income of students and expand the state’s economic base. “Columbia State offers associate degrees and technical certificates. Through the programs offered at this new campus, students will graduate with degrees that allow them to enter the workforce or continue their studies at a university. As we open the doors, we will be providing education and training for students seeking to be nurses, IT professionals, film crew technicians, or interested in commercial entertainment. All of these are professions in which jobs exist in our service area and that are in high demand. “Because of this new campus, we seek to offer an anesthesia technology program and a hospitality certificate — both are programs that have been requested by businesses and organizations and ones in which they are involved in development. As it pertains to those seeking a transfer degree, the state-ofthe-art science labs allows the college to offer the courses needed to obtain an associate of science degree without traveling to another campus.” The campus has been supported by state, community and college funds. Phase II construction will take place once the planning and funding is in place, and the design is initiated, assuming appropriation of construction funding in the following fiscal year’s budget. The building process will involve site work, including adjacent parking, followed by construction of the first building in Phase II. Hoar Construction served as the general contractor of Phase I. According to project manager Ripley Bickerstaff, this initial phase includes more than 110,000 sq. ft. (10,219 sq m) spread among three buildings and nearly 500 parking spaces. “These buildings are the first step in developing a central campus mall aimed at creating an outdoor space for faculty and students alike. The project also includes an extension of the southern portion of Knolltop Lane connecting Liberty Pike to the Ovation development currently under construction increasing connectivity with the community.” Navigating the public/private partnerships and relationship with the city of Franklin was among the biggest challenges.

Brian McCord, RealtyPictures.com photo

In Columbia, Tenn., officials at Columbia State Community College are looking ahead to a second round of construction on a $42.5 million campus, now that crews have put the finishing touches on the master plan’s Phase I.

“The negotiations for this property were complicated, due to an existing Planned Unit Development [PUD] that needed to be broken prior to closing. That process included countless meetings with the Mayor, Franklin Planning Department and adjacent land owners to agree upon the terms. A key component of the negotiations was the completion of Knoll Top Lane, a connector street that will serve future developments as well as the new campus. The costs for this road

were shared among the college, the city and adjacent developers. While this is an uncommon arrangement, the collaborative partnership of these entities enabled an agreement that met the needs of each party while providing an effective use of funds. Through these efforts and last minute funding from the state, Columbia State closed on the property at the end of 2012 and entered into the design and construction phases of the project.

Brian McCord, RealtyPictures.com photo

Hoar Construction served as the general contractor of Phase I.

“The previous relationships with the city and developers continued to be important during the design and construction phases. As a state-owned property, the city of Franklin had minimal authority to govern the use of the property although both the state and Columbia State were sensitive to this relationship. During design, both the college and design team worked tirelessly to meet the requests of the city while not impacting the needs of the college. This involved several meetings across all departments at the city. Compromises were reached on items such as landscape requirements and storm water management. These relationships continue to this day as the buildings and site improvements are reviewed and inspected by the city of Franklin.” The project site was a former phosphate strip mine. The strip mining process left several with unsuitable soil and created several sinkholes that were remediated as part of the site preparation. Additionally, a substantial amount of rock blasting and removal was required in order to excavate the site and construct the building pads. The pads themselves were over excavated 5 ft. (1.5 m) and back filled with clean shot rock. The elements also were an issue during construction. “The project experienced 57 days lost to weather above and beyond the NOAA fiveyear average. Weather included a combination of rain, snow and ice. ” A total of 116,500 cu. yds. (89,070 cu m) of dirt/materials was moved during construction. Equipment used on the job included articulated dump trucks for earth moving, vibratory rollers for earth compaction, excavators for site excavation, drill rigs for rock blasting/geothermal well installation, a crawler crane for steel erection and mast climbers for masonry and limestone installation. Scissor lifts, forklifts, D6 and D8 dozers, welding machines, a rock crusher and a chipper for mulching trees also were used. Some of the main materials required included 9,000 sq. yds. (7,525 sq m) of heavy-duty paving, 14,500 sq. yds. (1,347 sq m) of light-duty paving, 70,000 sq. ft. (6,503 sq m) of brick veneer, 11,500 sq. ft. (1,068 sq m ) of limestone veneer, 680 tons (616 t) of structural steel and 1,260 squares of steel deck. The most time-consuming part of the project involved coordinating additional work requests throughout construction. “Our team worked tirelessly to incorporate changes in the most cost effective manner while not holding up overall project progress,” said Bickerstaff. “Many of these revisions were needed to provide the most see COLUMBIA page 72

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ July 20, 2016 â€¢ Page 67

PRODUCTIVITY POWERHOUSE. Powered by our 6.8L EPA Final Tier 4 (F T4)/EU Stage IV diesel engine, the 850K Crawler Dozer picks up the pace when it comes to productivit y. Designed to work just as smart as you work hard, it comes packed with detail-oriented features that help you get in, out, and on to the next job. Our purpose-built mainframes optimize blade ratio and center of gravit y for superior balance. So whether you opt for a power/angle/tilt (PAT) or an outside-mount straight or VHPL 8 EODGH \RXÅ¤OO ZDWFK SURÆ&#x;WDELOLW \ VKDSH XS ULJKW EHIRUH \RXU H\HV

FLINT Construction &â€ˆForestry Division Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Braselton, GA 770/965-1889 Macon, GA 478/788-1586 Adairsville, GA 770/773-9857 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370

Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Aynor, SC 843/358-5688 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420

JAMES RIVER EQUIPMENT

, ,

www.jamesriverequipment.com , ,

Ashland, VA 804/798-6001 Manassas, VA 703/631-8500 Winchester, VA 540/667-9777 Tazewell, VA 276/596-9440 Fishersville, VA 540/337-3057 Salem, VA 540/380-2011 Asheville, NC 828/667-0176 Charlotte, NC 704/597-0211

Greensboro, NC 336/668-2762 Mt. Gilead, NC 910/439-5653 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Wilmington, NC 910/675-9211 Fayetteville, NC 910/424-1200

u COASTAL EQUIPMENTMo a www.coastalequipment.net

Virginia Beach, VA 757/424-1900 Yorktown, VA 757/898-1900

, NORTRAX 4

Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Miami, FL 305/592-5740 Orlando, FL 407/299-1212 Pompano Beach, FL 954/977-9541 Riverview, FL 813/621-4902 West Palm Beach, FL 561/848-6618

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 LaVergne, TN (Nashville) 615/501-8600

Page 68 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

E UP T O D ST EE R,, AN D RE CE IVE TR AD E YOU R CU RR EN T SK ID

DEMO ONE TODAY

DON ALLISON EQUIPMENT, INC.

WH EN YOU SW IT CH T O GE HL BY JULY 31, 201 6

2,6 2,600 lbs. capacity ca

Rebates and Competitive TTrade rade of offer ffer fer expires 7/31/2016. AAvailable vailablee at eligible and participating authorized Gehl dealers ffer fer not available to government accounts, national accounts, and municipal/utility in the United States and Canada. Of Offer rade Rebate requires a trade-in of a competitive skid loader brand bid customers. Some restrictions apply apply.. Competitive TTrade fer valid only on qualify.. Of Offer to qualify ffer o purchases of a Gehl R260 or Gehl V270 GEN:2. See dealer for more details. Manitou Americas, Inc. reserves the right to extend or discontinue any of these programs at any time without notice.

2,700 lbs. capacity

www.donallisonequipment.com 233 Melville Road, Arley, AL 35541 800-669-6450 205-387-1600 Fax: 205-387-1668

RICHMOND MACHINERY & EQUIPMENT COMPANY www.richmondmachinery.com 1701 Roseneath Road, Richmond, VA 23230 804-359-4048 Fax: 804-359-4179

gehl.com

CALL Y YOUR OUR L LOCAL OCAL GEHL DEALER FOR MORE DET DETAILS! AILS!

Port of Savannah Recently Docks Largest Ship to Date PORTS from page 1

A $706 million project began last fall in the Port of Savannah to deepen the Savannah River, but the river is still too shallow to allow the largest possible ships.

certain ports to allow for larger ships to gain access. Both Jacksonville, Fla., and Savannah, Ga., are in the process of creating more depth in their harbors. A $706 million project began last fall in the Port of Savannah to deepen the Savannah River, but the river is still too shallow to allow the largest possible ships. The project is around 15 percent complete. With these limitations aside, the Port of Savannah has become the fourth largest port in total TEU volume. The Port of Savannah recently docked its largest ship yet, the MOL Benefactor, a ship with a 10,000 container capacity. The port authority of New York and New Jersey is in the process of raising the Bayonne Bridge from 151 ft. (46 m) to 215 ft. (65.5 m) to allow for the passage of cargo vessels below it. Other cities on the east coast, such as Miami, Charleston, Baltimore and Fort Lauderdale, also are in the process of renovations to their facilities to accommodate the ships coming in from the Panama Canal. The improvements to the canal are not only creating business for the ports, but also some inland cities on the east coast. Greenville is one of many east coast cities creating warehouses and industrial parks. With more cargo coming in for a cheaper rate from Asia, there need be more facilities build to house it. There are now more than 6 million ft. (1.8 million m) of warehouse space under construction in the Greenville region. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 69

RISH EQUIPMENT COMPANY www.rish.com Bluefield, WV • 304/327-5124 Chesapeake, VA • 757/485-2100 Chester, VA • 804/748-6411 Coeburn, VA • 276/395-6901 Opal, VA • 540/439-0668 Salem, VA • 540/380-2090 Staunton, VA • 540/887-8291

POWER EQUIPMENT www.powerequipco.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283

LINDER INDUSTRIAL MACHINERY www.linderco.com find us on www.facebook.com/linderindustrialmachinery

Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570 North Carolina Asheville • 828/681-5172 Charlotte • 704/376-7554 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031 South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/552-0095

TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Mobile • 251/457-8991 Montgomery • 334/288-6580 Shoals Area • 256/383-5666 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500

Page 70 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Road, Bridge Projects Under Way From Miami to Tampa, Pensacola FLORIDA from page 8

then east to Jacksonville and back south again along heavily traveled I-95 on the east coast and I-75 further inland. Burleson said that most of the interstate work involves improving, rehabbing and widening the existing highway, with some express-lane addition, all of which he considers normal maintenance. “Florida is maybe a little unusual in that state law requires that before the FDOT can spend money on capacity they have to meet certain standards on all the roads and that is particularly those measurements that have to do with bridge safety and pavement conditions,” he said. “Back during the recession, FDOT was really just the Department of Maintenance, but now the rehab includes a lot of capacity improvement.” Even with 350,000 new residents coming into Florida last year and an estimated overall 2016 population of 20.2 million, Burleson said that he didn’t foresee many new-location roads being built in the state, other than streets for new subdivisions. Rather, there will be an abundance of new lanes added to the current highway system. Within the FDOT budget, safety projects and priority maintenance construction jobs are funded off the top, Boxold said, but after that a formula is employed to distribute funds to different regions of the state for road work. That formula takes into consideration population and gas-tax revenue that reflects where people are and where they are driving, he said. “On top of that, we have a significant amount of money in what we call our Strategic Intermodal System for projects that have a statewide benefit,” Boxold said. “That is money that we move around to different parts of the state to get priority projects done. We also utilize the public-private partnership (P3) model pretty extensively. We’re trying to being very strategic about where we use those investments.” Is Florida’s Plan Sustainable? But just how is Florida able to budget $10 billion for its transportation improvements, not just for the 2016-17 fiscal year, but for the last three years in a row, without an income tax to fall back on? Although many are skeptical Florida’s method can be sustainable over a long period, Boxold is more than happy to explain how it can be done. “We have a very diversified revenue stream for FDOT’s trust fund in that we rely on gas taxes, motor vehicle registration fees and, until recently, some documentary stamp taxes, which are taxes on real estate transactions,” he said. “Part of the reason our trust fund is so healthy, sort of like a well-planned retirement, is we are not stuck with only one source of funding and don’t have to rely on the rise and fall of the gas tax. But a lot of it, too, is powered by Florida’s economic turnaround.” Just a few years ago, Boxold said, Florida was plagued with an unemployment figure at more than 11 percent. “Today, we are down around 5 percent unemployed,” Boxold said. “We have record tourism now, too. I think we had around 100 million visitors last year and that adds up to a significant amount of revenue and tourism dollars coming into the state. “We also do very well in construction, and I think that

Florida has been outperforming most other states and probably the national average in terms of that growth, so the rebound has been quite significant.” Better, Faster, Cheaper Just this past April, the FDOT’s efforts got another boost when Scott signed into law HB 7027, a piece of legislation designed to deliver transportation improvements quicker and more efficiently. The bill is made up of two main initiatives. The first gives FDOT the authority to assume duties generally held by the federal government to get state transportation projects going under the National Environmental Policy Act (NEPA). The upshot of that is Florida would be able to use what was federal authority to review or approve any highway project within its borders under any federal environmental law. The second initiative in HB 7027 created the FDOT Financing Corporation, which means to keep costs low on large-scale projects by encouraging more competitive bidding and doing so through lower interest rates. With respect to the NEPA portion of the bill, Boxold said that all of the state’s road projects have had to go through a NEPA review, coordinated by the Federal Highway Administration (FHA), “so we spend an awful lot of time coordinating with FHA,” which, he said, slows down the development process. “California and Texas have similar legislation in place and because of that have been able to get through project development a third quicker, which is pretty outstanding,” he said. “Time is money everywhere and particularly here since we rely on consultants on a significant amount of project development, so in the first two years after the delegation is in place we expect to save $44 million, monies that can be reinvested in other projects. It sort of double-downs on itself.” Boxold said that, like other states, Florida has bonds for various types of projects such as right-of-way acquisition and bridge construction, but it doesn’t have an easy way to finance what he termed an individual “priority project.” “To do that, we have relied on the private sector, so what the finance corporation would do is allow us to get shortterm bank loans and commercial paper or bonds in order to deliver a specific project. If you look at the I-4 Ultimate in Orlando or the I-395 project down in South Florida where we have got them four or five years out in our work program, the effectiveness of having this initiative is apparent. Again, you save time and money because the estimate is that material and labor costs will rise in the next few years. With this measure, we are getting these projects done at today’s cost and getting them out for the traveling public quicker. “This is what HB 7027 wants to do: get projects done better, faster and cheaper.” Boxold said that Florida is fortunate to have Gov. Scott as its top executive because he understands the value of sound transportation infrastructure. “It doesn’t matter if you are talking about jobs, education or health care, you can have the best in the world but if you don’t have a way to get to those things easily they do you little good.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

ALABAMA

VIRGINIA

THOMPSON TRACTOR

COASTAL EQUIPMENT CORP.

www.thompsontractor.com Auburn, AL (334) 321-2030 Birmingham, AL (205) 326-0334 Dothan, AL (334) 673-3300 Huntsville, AL (256) 532-3001 Mobile, AL (251) 452-1180 Montgomery, AL (334) 262-1101 Oxford/Anniston. AL (256) 835-5737 Shelby County, AL (205) 649-9489 Tuscaloosa, AL (205) 247-3402

www.coastalequipment.net Virginia Beach (757) 424-1900 Yorktown (757) 898-1900

JAMES RIVER EQUIPMENT www.jamesriver equipment.com Ashland Ag (804) 358-6776 Fishersville (540) 337-3057 Winchester (540) 667-9777 NORTH CAROLINA

MISSISSIPPI

PUCKETT RENTS www.puckettrents.com Richland (601) 939-5151 Biloxi (228) 392-2211 Hattiesburg (601) 264-1111 Meridian (601) 703-0116 Madison (601) 859-5131 SOUTH CAROLINA

MAY HEAVY EQUIPMENT RENTAL & SALES www.mayequip.com Columbia (866) 629-3784 Charleston 866-629-3784

JAMES RIVER EQUIPMENT www.jamesriver equipment.com Asheville (828) 667-0176 Charlotte (704) 597-0211 Wilkesboro (336) 973-8201 Ahoskie (252) 332-5550 Fayetteville (910) 424-1200 Greenville (252) 758-4403 New Bern (252) 638-5838 Raleigh (919) 772-2121 Wilmington (910) 675-9211

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 71

FLORIDA

NORTRAX www.nortrax.com Fort Myers (239) 334-3627 Lutz (813) 995-0841 Miami (305) 592-5740 Orlando (407) 299-1212 Pompano Beach (954) 977-9541 Riverview (813) 621-4902 West Palm Beach (561) 848-6618

THOMPSON TRACTOR www.thompsontractor.com Pensacola, FL (850) 471-6710 GEORGIA

BORDER EQUIPMENT www.borderequipment.com Augusta (706) 737-9191 Atlanta (770) 322-6960 Savannah (912) 748-2828 LOUISIANA

H&E EQUIPMENT SERVICES www.he-equipment.com Alexandria (318) 443-7173 Baton Rouge (225) 356-6113 Kenner (504) 467-5906 Lafayette (337) 837-9600 Lake Charles (337) 528-2661 Shreveport (318) 746-5272

Now Available with Tier 4 Final

Page 72 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Poor Weather Conditions Prove Challenging for Crews COLUMBIA from page 66

functional space for Columbia State.” Each of the three buildings incorporates multiple programmatic areas to maximize educational offerings for Columbia State. The Arts & Humanities building houses the commercial entertainment program, the film crew technology program, dance studio, computer labs, the majority of general purpose classrooms and half of the faculty offices. This required sound proof construction in studios, a cyclorama wall in the film studio, a cushioned dance floor and extensive low-voltage cabling. The Science/Technology/Engineering/ Mathematics (STEM) building includes the science and nursing programs, chemistry, biology and physics labs, computer labs and the remaining half of the faculty offices. This required special lab construction including exhaust systems and hoods, gas connections, eye wash stations and acid resistant counter tops. The student services and administration building includes the employment workforce development program, the dean’s suite, a conference suite, the reading/library area and testing and tutoring spaces all with high-end finishes. As for sustainable construction, the project utilizes a geothermal loop system that includes more than 130 500-ft. (152 m) deep wells, with mechanical systems, including 31 energy-efficient heat pumps. “The existing cherry trees were harvested on site, and used to build over twenty benches located throughout each building,” Bickerstaff said. “Low-flow plumbing fixtures, hydration stations, automated dispensers and energy-efficient lighting were specified to reduce life cycle costs and environmental impact. “Construction waste was diverted throughout the building process to recycle wood, cardboard and metal. The new campus encourages alternative transportation options including trolly stations, electric vehicle charging stations, bike racks, shower facilities and a multi-modal trail connecting the campus to adjacent communities.” The layout for the new campus was a creative challenge for the design team. “The main vision for this project was to give Columbia State’s Williamson County campus a specific identity intrinsically tied to its location,” said J. Garry Askew, BAUER ASKEW Architecture. “The design intent was to create an inviting campus atmosphere that encourages connection and community fostering a healthy learning environment, not just another commuter satellite location.” Askew said in addition to being located on the side of a hill, the site itself was a concern in that it was an abandoned phosphate mining site.

Brian McCord, RealtyPictures.com photo

The Science/Technology/Engineering/Mathematics (STEM) building includes the science and nursing programs, chemistry, biology and physics labs, computer labs and the remaining half of the faculty offices.

“The design essentially carved the campus into the terrain, which required remediation of mining sinkholes, as well as a large amount of earth work. In addition to addressing the existing conditions, the campus was designed to be accessible for all students, therefore minimizing the effect of significant grade changes was a critical challenge. The design and construction teams worked together to create premier educational environment out of a challenging

site.” The most rewarding aspect of the project, Askew said, was the collaboration with the client to create a physical manifestation of their dreams and vision for this campus. “The design team met with all levels of campus faculty and staff to identify specific needs and worked with the construction team to ensure those needs were met.” Askew also said sustainability was an integral part of the design process.

Brian McCord, RealtyPictures.com photo

The campus has been supported by state, community and college funds.

“The decision was made early in the design process for the entire campus to utilize geothermal mechanical systems. These are served by 144 wells each at 500 ft. deep. The fields are located beneath the parking lots and the main commons space for the campus. “In addition, the project focused on sustainability in several other ways. One specific example was the design team’s approach to existing trees. The site originally had a number of new growth trees at this former mining site that were removed to accommodate the campus. Of those, cherry trees were specifically identified, salvaged, milled, finished and eventually returned to the site in the form of benches that line the corridors of the academic buildings. The team made special efforts to use a local mill and labor force for the entire process from start to finish.” Described as contemporary collegiate gothic, the design acknowledges the college’s request for timeless buildings. “It alludes to historical references with rhythm and richness of material, but is also distinctly crafted with current technology,” said Askew. “One of the most exciting features of the campus is the strong connection between interior and exterior spaces on campus. Early in the design process, there were significant efforts to divide the desired program into three separate buildings in order to achieve a campus atmosphere. Through the use of expansive windows and main entries opening to a central quadrangle, the design team fostered transparency between the various buildings on campus, focusing visual connections and physical interactions on the main outdoor quadrangle.” Smith said, “Providing students with skills and knowledge that is validated by a degree or certificate provides for a career and an income after graduation. Working with the community, businesses and organizations to identify and develop courses and programs such as the hospitality certificate provides a workforce to meet the skilled needs of the area. Expanding educational opportunities for completion of degrees builds an educated citizenry. The higher the education level of the citizenry, the greater the state’s economic base.” Now that Phase I work has concluded with a formal ribbon cutting, said Smith, “There are not words to describe the feeling. It is surreal in a very good way. It’s very gratifying to know that the biggest reward will be lives being touched for the better because the campus exists and that those lives will touch others that will make a difference. The impact is immense.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 73

Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.

DELIVERING SUCCESS TOGETHER

Contact our distributors and find out how we can help improve your bottom line.

DOZIER CRANE R T- T- HC/CC- AT- B T www.doziercrane.com

ML CRANES & EQUIPMENT R T- T- HC/CC- AT- BT www.mlcranes.com

155 Pine Barren Road Pooler, GA 31322 912-748-2684 Fax: 912-748-5361

VIRGINIA

MARYLAND

160 Kentmere Court Winchester, VA 22603 540-722-3700

4601 Washington Blvd. Baltimore, MD 21227 410-242-6500

BIGGE CRANE AND RIGGING

1345 Mountain Rd. Glen Allen, VA 23060 804-266-0000

DELAWARE

RT- T- HC- CC- AT- B T- T www.bigge.com

4112 Holland Blvd. Chesapeake, VA 23323 757-485-3314

17941 Sussex Highway Bridgeville, DE 19933 302-337-3400

2400 Maury Street Richmond, VA 23224 804-271-9356

8450 Quarry Rd. Manassas, VA 20110 703-393-7344

NORTH CAROLINA

101 Big Crane Lane Aiken, SC 29801 843-834-9103

2025 Cook Drive Salem, VA 24153 540-989-3750

10604 Airline Highway Gonzales, LA 70737 504-421-9774

808 Norton Rd. Wise, VA 24293 276-328-8027

For Your Local Terex Dealer Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

3908 N. Graham St. Charlotte, NC 28206 877-649-7739

Authorized Terex Cranes Distributors © Terex Cranes 2016 · Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.

Page 74 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Attachments Pages 75-81

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Volvo Launches Range of Application-Specific Buckets Specifically designed to fit Volvo L110-L350 wheel loaders, the Volvo sand bucket, Volvo rehandling flat floor bucket and Volvo rehandling bucket enable operators to reduce cycle times through more efficient material handling and increased material capacity — reducing fuel consumption by up to 10 percent, depending on application, according to the manufacturer. “One of the best ways to increase production and limit fuel costs is to efficiently match the bucket to the job site,” said Stefan Salomonsson, product manager, wheel loaders at Volvo Construction Equipment. “These new buckets allow for larger material capacity and keep a clean and level work area, so operators can move more in less time. Plus, they’re specifically matched for a variety of ground conditions, so operators have an easier time capturing and delivering material.” Shaped to Perform The intelligently designed buckets are

easy to fill, due to the bucket shape, balanced floor back ratio and countersunk holes. Spill guards are designed to deflect materials and protect the linkage, while convex side plates provide excellent retainment of material. To prevent different material grades from mixing, the buckets also feature minimized pockets. More Profit in Every Bucket Perfectly matched for transporting aggregate, the Volvo rehandling bucket allows operators to do the same tasks while using less fuel, resulting in more material in the bucket and faster cycles. For handling, stockpiling and loading processed materials such as sand, gravel and aggregate, the Volvo rehandling flat floor bucket is the perfect fit. For applications on sand or other soft terrain, the bucket maximizes traction and penetration. When operating in very soft ground conditions where tire traction is compromised, the Volvo sand bucket is the ideal

choice. Designed for handling sand or aggregate, the long bucket floor maximizes penetration for improved fill-factor, while its flat design helps to maintain a clear and level work area. Made by Volvo, for Volvo As with all Volvo attachments, the latest additions have undergone extensive testing to ensure the highest standard of productivity and durability across any application. High-tensile steel and wearresistant parts are positioned in critical areas, minimizing unscheduled downtime. The two-piece mid-section features a bolt-on cutting edge for easier replacement. All three buckets are available for both torque parallel and Z-Bar linkage on Volvo wheel loaders. For more information, call 717/532- The three newest additions to the comprehen9181 or visit www.volvo.com. sive range of wheel loader buckets from Volvo (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

are redesigned with increased capacity and spillage protection for faster cycles at a lower operating cost.

Digga’s Auger Drives Deliver Powerful Performance

The Model 1MDS2 auger drive is designed for simple applications with single axis 2-way swing capabilities (FWD-REV), and the Model 1MDS4 is designed for those applications where dual axis 4-way swing capabilities (FWD-REV-LFT-RGT) are required.

With a maximum theoretical output torque of 2,119 ft-lbs, the new Digga mini-loader auger drives, manufactured by Iowa-based Digga North America, deliver more powerful performance than comparable units for increased overall productivity. The result of more than 30 years of experience in the design and manufacture of planetary gearboxes and drives, the Digga 1MDS2 and 1MDS4 auger drives are engineered for use on mini-loaders and compact tool carriers. The new planetary gearbox-driven auger drives will work effectively on auxiliary flows of between 6 to 16 gpm (22.7 to 60.5 Lpm) to accommodate the wide range of units on the market today, and come complete with a unit-specific mounting plate for easy installation and set-up, according to the

manufacturer. The Model 1MDS2 auger drive is designed for simple applications with single axis 2-way swing capabilities (FWD-REV), and the Model 1MDS4 is designed for those applications where dual axis 4-way swing capabilities (FWD-REV-LFT-RGT) are required. Offering both designs ensures that the exact job requirements are considered without purchasing more than is needed for the application. In addition to the unique design characteristics of these mini-loader units, they carry an additional advantage as well. Digga drilling drives are covered by a 5-year warranty on the planetary gearbox and a 3-year warranty on the hydraulic motor, with lifetime shaft pull-out warranty for extra protection.

Digga is a leading global manufacturer of planetary gearboxes for machinery attachments, serving the construction and earthmoving industries since 1981. With world headquarters in Yatala, Queensland, Australia, and operating from five manufacturing facilities across three continents, Digga produces one of the largest ranges of high-torque planetary drives in the anchor/foundation and drilling attachment markets. Digga’s North American Operations is centrally located in Dyersville, Iowa. For more information, call 563/875-7915 or visit www.diggausa.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 76 • July 20, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

USED PARTS FROM THOMPSON MACHINERY Used Caterpillar® parts from Thompson offer a great value for replacing or repairing industrial heavy machinery. And because the part is made by Caterpillar, you’ll know you’re getting a reliable product that won’t let you down when you need it most. • Used Parts and Attachments including Cat® cabs, OROPS, buckets, more • Used, Rebuilt, and Exchange Components including final drive parts, pumps, differentials, travel motors, more

• If we don’t have your part in stock, we can locate it with our nationwide Parts Locator Network. We also buy used and salvage equipment. Call Thompson Machinery at 615.259.5820 (Fax: 615.793.2428) or check out our inventory online at www.thompsonmachinery.com/parts/used-parts

Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • July 20, 2016 • Page 77

GOT BRUSH? Six USA mad de e skid stteer br b ush cutters for any applic ation.

Dec Deck ck Styles y S E R I E S

ų 2SHQ )URQW ų 2SHQ )URQW ų &ORVHG )URQW ų &ORVHG )URQW

Deck Styles y S E R I E S

ų 2SHQ )URQW ų 2SHQ )URQW ų &ORVHG )URQW ų &ORVHG )URQW ų )ORDWLQJ &ORVHG )URQW ų )ORDWLQJ &ORVHG )URQW

Deck ck Styles y S E R I E S

ų 2SHQ )URQW 2QO\ ų 2SHQ )URQW 2QO\

(Shown in action pic above)

9,51,*0)* &20 ų 9,51,*0)* &20 ų 800-648-2408

Alabama

www.tractor-equipment.com

Alabaster 205-621-2489 Anniston 256-831-2440 Birmingham 205-591-2131 Decatur 256-355-0305 Dothan 334-678-1832

Mobile 251-457-8991 Montgomery 334-288-6580 Shoals Area 256-383-5666 Tuscaloosa 205-752-0621

Florida Panama City 850-763-4654 Pensacola 850-505-0550

Georgia Albany 229-435-0982 Atlanta 404-366-0693 Augusta 706-798-7777 Calhoun 706-879-6200 Columbus 706-562-1801

Hoschton 706-654-9850 Kennesaw 678-354-5533 Macon 478-745-6891 Savannah 912-330-7500

Page 78 • July 20, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

Made in the USA…

Virnig’s Tree Puller Attachment Works for Small Jobs Virnig Manufacturing Inc.’s tree puller is designed to pull out small trees and fence posts. The two rows of serrated teeth lock onto the base of the tree, then pry or pull roots and all from the ground, shake the dirt out of the roots, and then transport the removed tree or shrub. The jaws open to 11.5 in. (29 cm) and the hard stop at the tip keeps a small space between teeth when fully closed. This allows even small trees to be pulled without shearing them off. The single hydraulic cylinder is protected from debris and other objects. The corrosion, dent and flake resistant NitroSteel cylinder rod is made in the USA. All Virnig products are backed by a one-year warranty, and the skid steer attachments are USA made and built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson and others. For more information, call 800/648-2408 or visit virnigmfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Case Introduces New Line of Sectional Snow Pushers Virnig Manufacturing’s tree puller is designed to pull out small trees and fence posts.

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Case Construction Equipment has a new line of six heavy- and light-duty sectional snow pushers compatible with both current and older model wheel loaders, skid steers, compact track loaders and backhoes. The independent moldboard sections move independently, allowing each section to shift up and down in response to uneven pavement or obstacles. The light-duty models, designed for compact equipment and backhoes, feature pushers up to 13-ft. (4 m) wide. The heavy-duty line offers pushers up to 17-ft. (5 m) wide for full-sized wheel loaders. The Case pushers also are compatible with competitive equipment and allow a snow removal contractor to standardize on a single type/style of pusher across their fleet, according to the manufacturer. Each pusher features a Hardox 450 steel cutting edge that scrapes cleanly down the pavement and, if obstacles are encountered, only a single section of the pusher is lifted off the ground. This ensures that the other sections of the pusher remain flush with the ground and more snow is removed on the first pass than traditional snow pushers and snowplows. The new pushers also provide additional advantages that help snow contractors keep operating costs down: • Plowing an area cleanly on the first pass

helps reduce the need for secondary passes, ultimately allowing the work to be done faster and with less wear and tear on the machine/pusher. • The ability for the leading edge of the pusher to “trip” over obstacles helps prevent equipment damage, and can also help reduce instances of property damage. • Removing more snow and ice on the

first pass also can significantly reduce salt use, saving additional costs in labor and resources. • If a section becomes damaged, that single modular section can be replaced instead of replacing the whole pusher, a significant cost savings. For more information, visit CaseCE.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • July 20, 2016 • Page 79

Mobro Marine Sells CRANE PARTS You will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directly from the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does this mean we have the part you need in stock, it also saves you money. Because we buy in volume, we can buy for less and pass the savings on to you. We sell high quality genuine OEM parts from the following manufacturers: • Terex • American • Bucyrus-Erie • P&H • Kobelco • Koehring • Lorain • Northwest Crane

THIS MONTH’S SPECIALS 2082500022 - Two turntable bearings for a Komatsu

21400N3354F2P1 - One turntable bearing for a Kobelco

PC400-3. Avon# 2055B3 ................................$7,175 Each

907C or K907C. Avon# 1447B2 ..............................$4,850

2072500022 - Two turntable bearings for a Komatsu

KBB0282 / D28001 - One Link-Belt turntable bearing for

PC300-3. Avon# 1555B3 ................................$4,475 Each

a LS3400C. Avon# 1249B5 ......................................$3,950

2052500021 - Two turntable bearings for a Komatsu

TH103075 - One John Deere turntable bearing for

PC200-3. Avon# 1148B4 ................................$3,450 Each

model 792. Avon# 1556B8 ......................................$3,500

24100N418F1 - One turntable bearing for a Kobelco 909.

TH108810 or AT190766 - One John Deere turntable

Avon# 1551B9 ..........................................................$2,075

bearing model 490D and 495D. Avon# 1143B9 ....$1,100

Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime. We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type.

Please Contact Billy Harper or Tony Cruz at 904-733-1822 Hablamos Español

www.mobromarine.com/parts/php

MOBRO MARINE, INC.

Page 80 • July 20, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

North American Attachments

800-380-8808 www.excavator-attachments.com

Virnig Manufacturing Inc.’s value-priced dirt bucket attachment, the Virnig V40 low profile dirt bucket, has a low profile design and extended

Excavator Attachments

Compaction Wheels

Ripper Tooth

Ditching Cleaning Bucket Drain Holes Optional

Severe Duty & Rock Excavator Buckets

Dual Action Grapples

Tree Stumpers

Hydraulic Thumbs

Pin Grap Couplers

Skidsteer Attachments

Grapple Rakes

Grapple Buckets

Skeleton Buckets

Loader/Backhoe Attachments

Fork Carriages & FORKS

Loader Rake w/Grapples

All Sizes... Manual & Hydraulic Thumbs

Virnig Launches New V40 Low Profile Dirt Bucket Attachment

Dozer Rakes

General Purpose Loader Buckets

Quality Construction Attachments

bottom for better visibility of the cutting edge. The shell and side plates are made from 3/16 in. Grade 50 steel plate and the ½ by 3 in. (1.3 by 7.6 cm) structural wear bars underneath add rigidity and increase the life-span.

An optional bolt-on edge and serrated edge can be added to standard ¾ by 6 in. (1.9 by 15 cm) weld-on edge to extend the overall life of the bucket. It comes in five different models that are 5 to 7 ft. (1.5 to 2 m) wide and weigh 405-515 lbs. (183.7 to 233.6 kg). All Virnig products are backed by a one-year warranty, and the skid steer attachments are USA made and built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, WackerNeuson and others. For more information, call 800/648-2408 or visit virnigmfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • July 20, 2016 • Page 81

CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES

ENGINEERED TO PERFORM DURABLE BY DESIGN ypicall .200” wall thickness

• Kits to operate most any attachment • Welded tube ends for maximum strength & durability • OEM style ORFS or CD62 4-bolt flange • Higher safety standards • Efficient designs with fewer connections • Conversion and upgrade kits available for OEM factory kits

www.hctkits.com www.hctkits.com • 888.603.0080 • sales@hctkits.com

Page 82 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Liebherr Designs Crawler Tractor for Mining, Quarries Liebherr’s first crawler tractor in the 77 ton (70 t) category — the PR 776 — is designed for tough mining and quarry operations. The new PR 776 is powered by a Liebherr 12-cylinder diesel engine developing 762.7 hp (565 kW). The PR 776 has a maximum operating weight of 81.6 ton (74 t) and is equipped with blade capacities of 23.5 cu. yd. (18 cu m) (semiU blade) or 28.8 cu. yd. (22 cu m) (U blade). Efficiency and Performance: Modern, Infinitely Variable Drive Concept The modern drive concept of the new PR 776 offers efficient and safe operation to customers. A new feature in this machine class is the infinitely variable hydrostatic travel drive, which is used for all crawler tractors from Liebherr Another advantage of the modern drive concept is the optimization of pressure flow. Hydraulic servo pressure is based on demand according to the task. If, for example, the full feed of pressure supply is not required when operating, this is automatically returned. The ECO function is standard for all Liebherr Generation 6 crawler tractors — including the new PR 776. It allows operators to choose between high performance and maximum efficiency. The ECO control system enables greater travel drive efficiency in light to medium operations, and also provides greater fuel savings. The proactive power control is another innovation of the 6th generation crawler tractors. Internal engine and external machine parameters are recorded, such as the current deflection of the joystick. If required, the engine power is automatically increased for a brief period based on the current requirement. As well as responding more rapidly, the machines offer a significant increase in performance potential and pulling power and a higher reverse speed, according to the manufacturer. Liebherr custom-engineers integral equipment solutions. The intelligent Liebherr engine management system combined with the Liebherr power efficiency system and the hydrostatic driveline allows Liebherr to master and opti-

mize all equipment systems and processes to maintain constant engine speed, increase overall machine efficiency and reduce fuel consumption of the PR 776. Differentiating Liebherr’s travel drive concept from other drive concepts available on the market, with which the engine speed fluctuates sharply during operation. All of these measures lead to significantly lower fuel consumption than the industry standard with similar pushing performance. Another key advantage of hydrostatically powered crawlers when working in restricted spaces is the maneuverability with continuous power to both tracks. With an optional GPS navigation system, the work progress and the surrounding area can be visualized. increasing machine productivity and minimizing operator stress and strain. Pendulum-mounted guide wheels and track rollers ensure enhanced chain traction and significantly reduce equipment vibration. Operator Comfort: Intuitive Operation The operator quickly finds his bearings in the new PR 776 platform developed especially for this machine class. A focal point for development was the simple and safe operation of the crawler tractor. The multifunction joystick houses all operating and steering movements at the palm of the operator’s hand with only one electronic input element. This intuitive operating concept was subject to rigorous testing at Liebherr and is an important innovation for the 77 ton crawler tractor’s category, particularly in mining applications. The modern and spacious workstation in the PR 776 ensures excellent environment for greater performance and relaxed working conditions. The cab is purposely designed and all instruments and operating controls are carefully organized for easy reach. All key functions and machine settings can be adjusted by the operator via the touchscreen display. ECO function parameters, automatic engine speed reduction, travel drive response, steering as well as standard safety functions such as the rear view camera can be all be

The new Liebherr crawler tractor PR 776 is suitable for mining and quarry operations.

accessed through the intuitive touchscreen display. Operators can conveniently adjust multiple machine settings including travel drive, blade and rear ripper to their needs. Ergonomically shaped joysticks ensure operator’s comfort. An automatic air-sprung seat detects and adjusts to the operator and deactivates the machine when exiting the cab without a safety lever having to be actuated.

and operating fluids. Another safety factor is the newly developed illuminated safety ladders. For optimal illumination of the working area, high performance LEDs are used depending on the chosen equipment level. The modular lighting concept is an element of the new machine design and makes it possible for the lighting to be adapted optimally to the respective use.

Maximum Safety With Excellent View of Equipment and Surrounding Area The modern design of the new Liebherr PR 776 offers all-round visibility for safe and efficient dayto-day operation. Safety is enhanced by the visibility of the work site, the blade and rear ripper which is assured by the larger panoramic windows and downward slopes on the PR 776. A new feature in this class is the ROPS / FOPS protection integrated directly in the cab structure as standard for Liebherr crawler tractors. Forward visibility is completely unobstructed as the exhaust system and lifting rams have been positioned behind the A-pillars. Also the side view of the working area is clear and unobstructed by the extended work platform. This allows access to the cab, service points and filler necks for auxiliary

Reliability: Robust Components Manufactured In-House Liebherr diesel engines have powered construction machinery around the world for decades. Developed for tough conditions, they guarantee maximum operational safety, reliability and a long service life due to the robust design and modern technology. With the tried-and-tested hydrostatic Liebherr travel drive, components with high wear such as multi-speed gearboxes, steering clutches or service brake are not installed. Instead, the high-quality hydraulic pumps and engines work practically wear-free and are particularly reliable, according to the manufacturer. Liebherr also has custom-developed different configuration packages in-house for extreme applications such as desserts where extreme climates and low temperatures are common.

Optimal Service Accessibility and Long Change Intervals Centrally located maintenance points, access flaps and engine compartment doors that open to a wide angle, a tilting cab as standard equipment and, as an option, a radiator fan that can be swung out for cleaning are all features that speed up and simplify servicing work on the new Liebherr crawler tractor. The new PR 776 has exceptionally long change intervals for operating fluids such as hydraulic or engine oil. Depending on the nature of the work, and provided that regular checks are performed, the change interval for Liebherrplus oils can be as long as 8,000 hours of operation. The standard Liebherr fleet management system LiDAT provides an accurate, efficient overview of essential servicing work, warning messages, the machine’s position and actual consumption data and filling levels. Depending on the agreement with the customer, the data is updated several times a day and can be called up whenever needed via the Internet. For more information, visit www.liebherr.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 83

BusinessCalendar

Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ July 24-26, 2016 – APTA Sustainability & Public Transportation Workshop The 2016 APTA Sustainability & Public Transportation Workshop is scheduled for July 24-26, 2016, at the Westin Austin Downtown, 310 E. 5th Street, Austin, TX. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ August 14-16, 2016 – State Public Transportation Partnerships/Transit Midwest Conference The 2016 State Public Transportation Partnerships/Transit Midwest Conference is scheduled for August 14-16, 2016, at the Westin Crown Center, 1 E. Pershing Road, Kansas City, MO.

To view our Business Calendar online, go to www.constructionequipmentguide.com.

Construction Association of Michigan (CAM) The mission of Construction Association of Michigan is to provide service, information and assistance to the construction industry. The Association exists to foster growth in the construction industry and encourage networking between members and their publics. CAM will act as a catalyst to promote and enhance profitability, efficiency and integrity within the industry for the benefit of association members. For further information: Website: http://www.cam-online.com; Email: marketing@cam-online.com; Address: 43636 Woodward, Bloomfield Hills, Michigan 48302; Phone: 248/972-1000. Michigan Construction News Coming Events: July 19, Tuesday – Construction Association of Michigan, Golf Outing, Links of Novi. Contact: CAM, 248/972-1000. July 27-31, Wednesday-Sunday – Michigan Infrastructure & Transportation Association, 2016 Summer Conference, Crystal Mountain Resort, Thompsonville. Contact: MITA, 517/347-8335. August 16, Tuesday – Construction Association of Michigan, Golf Outing, Fieldstone Golf Club, Auburn Hills. Contact: CAM, 248/972-1000. August 20, Saturday – Woodward Dream Cruise, “Cruise Into CAM,” CAM HQ, West Bloomfield. Contact: CAM, 248/972-1000. September 20, Tuesday – CAM Fall Sporting Clays, Hunters Creek Club, Metamora. Contact: CAM, 248/972-1000.

Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ August 28-31, 2016 – APWA Public Works Expo The 2016 APWA Public Works Expo (PWX) takes place on August 28-31, 2016 at the Minneapolis Convention Center, Minneapolis, MN. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ September 11-14, 2016 – APTA Annual Meeting The 2016 APTA Annual Meeting is scheduled for September 11-14, 2016, at the JW Marriott Los Angeles L.A. Live, 900 W. Olympic Boulevard, Los Angeles, CA. MISSOURI LAND IMPROVEMENT CONTRACTORS OF AMERICA 2016 NATIONAL LICA SUMMER MEETING INTERCONTINENTAL KANSAS CITY AT THE PLAZA KANSAS CITY, MISSOURI DATES: JULY 18-23, 2016 CALL 866/856-9717 (LICA SUMMER MEETING) OR VISIT WWW.KANSASCITYIC.COM. GROUP CODE IS LIC. Missouri Land Improvement Contractors of America Construction Equipment Operation Safety – NRCS and OSHA Policy WEBINAR – ONE HOUR Date: JULY 26, 2016 For more information, contact Deb Dickens at 573/634-3001 or email: MLICA@aol.com.

AGC Safety & Health Conference Wednesday, July 27, 2016 to Friday, July 29, 2016 District of Columbia OAIMA (Ohio Aggregates & Industrial Minerals Association) The Ohio Aggregates & Industrial Minerals Association is the trade association in Ohio that represents all of the state’s mining operations except coal. OMMEP GOLF OUTING – July 18, 2016 – 9:00 AM to 11:00 AM For more information, please contact OAIMA at 1-800.OH.ROCKS or 614/4287954. Fax: 614/428-7919.

Missouri Land Improvement Contractors of America 10th International Drainage Symposium The Commons Hotel Minneapolis, MN Dates: September 7-9, 2016 For more information, contact Deb Dickens at 573/634-3001 or email: MLICA@aol.com.

STAFDA – Specialty Tools & Fasteners Distributors Association Welcome to STAFDA! STAFDA is an international educational association comprised of distributors, manufacturers, rep agents, and affiliates (trade press) serving the construction/industrial market. We have 2,500 members from across the globe and have been serving the Construction & Industrial Channel since 1976. UPCOMING EVENTS: STAFDA’s 40th Annual Convention & Trade Show Atlanta, GA November 6 – 8, 2016 Georgia World Congress Center Registration materials will be mailed to members the third week of June. You must be a member to attend! STAFDA has a series of training manuals, along with benchmarking surveys, and over 65 different programs to serve your needs! We encourage you to explore our website and learn more! STAFDA 500 Elm Grove Road – Suite 210 – P. O. Box 44 – Elm Grove, Wisconsin 53122 Phone: 800/352-2981 or 262/784-4774 Fax: 262/784-5059 Info@STAFDA.org

Missouri Land Improvement Contractors of America 2016 GOLF OUTING and “FUN-RAISER” Hail Ridge Golf Course Boonville, MO Date: SEPTEMBER 16, 2016 For more information, contact Deb Dickens at 573/634-3001 or email: MLICA@aol.com. Iowa Land Improvement Contractors Association (LICA) 2016 Golf Outing FRIDAY, AUGUST 5, 2016 Beaver Creek Golf Course Grimes, Iowa Iowa LICA Four Person Best Ball Tournament Shotgun start is at 12:00 Noon. Please arrive by 11:00 AM for “rules” of the game. Don’t be late! Lunch is on your own. The golf course has food available. You can put your own foursome together or you can come and a foursome will be made at the course. This is open to men, women, and children who want to play. $90.00 per person which includes: golf fees, cart, prizes and grilled steak dinner. Send check and registration form to: Iowa LICA, 1310 8th Avenue, NE, Independence, IA 50644. Call Dan at 319/240-2420 with questions.

TDWI Seminar in Boston 2016 Wednesday, July 27, 2016 to Friday, July 29, 2016 Questions? info@tdwi.org

TDWI Seminar in Salt Lake City, UT 2016 BUSINESS ANALYTICS DATES: Monday, JULY 25; Tuesday, JULY 26;

SEMINAR LOCATION:

Wednesday, JULY 27; Thursday, JULY 28 University Guest House & Conference Center 110 S Fort Douglas Blvd Salt Lake City, UT 84113-5036 TDWI Analytics Fundamentals TDWI Predictive Analytics Fundamentals TDWI Data Visualization Fundamentals Data Storytelling: The New Horizon in Business

MONDAY, JULY 25: TUESDAY, JULY 26: WEDNESDAY, JULY 27: THURSDAY, JULY 28: Analytics If you register to become a Premium Member of TDWI at the time of your seminar registration, you can attend at TDWI Premium Member rates. Please contact us at 425/277-9201 or registration @tdwi.org. All non-member registrations for three or more days include a one-year TDWI Premium Membership. You may, however, decline Premium Membership on the registration form. TDWI Seminar in Washington D.C. 2016 BUSINESS INTELLIGENCE FUNDAMENTALS DATA QUALITY and GOVERNANCE Dates: Monday, Se ptember 19; Tuesday, Septembe r 20; Wednesday, September 21; Thursday, September 22 SEMINAR LOCATION: Embassy Suites Crystal City National Airport 1300 Jefferson Davis Hwy Arlington, VA 22202 Register by August 26 for Early Bird Discount…Save up to $300! If you register to become a Premium Member of TDWI at the time of your seminar registration, you can attend at TDWI Premium Member rates. Premium Membership is $275 for one year. Teams of three or more can also receive an additional 10% discount on registration fees. Please contact us at 425/2779201 or registration@tdwi.org to receive your priority code. All non-member registrations for three or more days include a one-year TDWI Premium Membership. You may decline Premium Membership on the registration form. NLICA – The Nebraska Land Improvement Contractors Association NEBRASKA LICA CONSTRUCTION EXPO & FIELD DAY Plan to Attend the 2nd Nebraska LICA Construction Expo and Field Day. DATE: THURSDAY, JULY 28, 2016 TIME: 9:00 AM to 5:00 PM SITE LOCATION: 18060 OLD CHENEY ROAD, WALTON, NE 68461 *Directions from Lincoln, NE: Travel East on US-34 E. Turn Right onto S 148th Street. Turn Left onto Old Cheney Road. THIS EVENT IS FREE TO THE PUBLIC!!! Contractors will have the opportunity to access multiple associates at once, with hands-on testing of equipment and the chance to see the latest innovations and products related to the industry. NLICA associate members are encouraged to participate in this event. For more information on this event, contact Nancy Dvorak, Event Coordinator at 402/693-2517 or nancy@prussexcavation.com. For additional information, you may also visit www.NELICA.org. 2016 National LICA SUMMER MEETING Missouri Land Improvement Contractors (MLICA) is hosting 2016 National LICA Summer Meeting CELEBRATING 75 YEARS OF STEWARDSHIP! DATES: JULY 19-23, 2016 PLACE: INTERCONTINENTAL HOTEL KANSAS CITY at the PLAZA 401 Ward Parkway KANSAS CITY, MO For more information contact 866/856-9717 or go to www.kansascityic.com. APWA PWX CONFERENCE 2016 DATES: AUGUST 28th – 31st, 2016 PLACE: MINNEAPOLIS, MINNESOTA The American Public Works Association (APWA) PWX Conference will be held from August 28th through August 31st, 2016 in Minneapolis. The PWX Conference was formerly known as the APWA Congress. The event is a networking and educational opportunity for public works professionals. If you would like more information on this Conference or if you have a question for the APWA-MN Chapter, kindly contact the APWA-MN Chapter by mail: APWA-MN Chapter, PO Box 27965, Golden Valley, MN 55427; TOLL FREE: 1-888-407-2650. AGC OF MINNESOTA AGC OF MINNESOTA GOLF TOURNAMENT WHEN: FRIDAY, AUGUST 5, 2016 WHERE: STONEBROOKE GOLF CLUB

2693 CO RD 79 SHAKOPEE, MN 55379 DENISE WOODS DWOODS@AGCMN.ORG 651/796-2186 REGISTRATION IS AVAILABLE JUNE 2016. CONTACT:

AGC OF MINNESOTA AGC OF MINNESOTA SPORTING CLAYS FUNDRAISER WHEN: MONDAY, AUGUST 29, 2016 WHERE: MINNESOTA HORSE AND HUNT CLUB 2920 E 220TH STREET PRIOR LAKE, MN 55372 CONTACT: DENISE WOODS DWOODS@AGCMN.ORG 651/796-2189 REGISTRATION IS AVAILABLE JULY 2016. Registration Open for 2016 Offsite Construction Expo SEPTEMBER 21 and 22 in Washington, DC Registration is now open for the 2016 Offsite Construction Expo. There is simply no greater opportunity to reach key partners in the offsite construction industry. The Offsite Construction Expo (OSCE) will feature exhibits from offsite construction contractors, traditional contractors that have integrated offsite methods, offsite factories, transportation companies, architects, engineers, BIM suppliers, materials suppliers, and consultants of all types of offsite construction processes. Additionally, eight case studies will be presented on the hour on the expo floor. Questions about this event??? Event staff can be contacted by phone: 434/2028180 or e-mail: info@hardimanwilliams.com. Event Location: Walter E. Washington Convention Center, 801 Mt. Vernon Place, NW, Washington, D.C. 20001. Phone: 202/249-3000. SIXTH ANNUAL SHALE INSIGHT TM CONFERENCE 2016 SHALE INSIGHT TM 2016 ENERGIZED WITH REGIONAL OIL & GAS PARTNERSHIP MSC, OOGA, WVONGA partnership advances stronger industry voice and collaboration Pittsburgh, PA / Columbus, OH / Charleston, W.VA. – The Marcellus Shale Coalition (MSC), the Ohio Oil and Gas Association (OOGA) and the West Virginia Oil and Natural Gas Association (WVONGA), are pleased to announce a joint partnership to host the Sixth Annual Shale Insight TM Conference. This industry-leading event will take place in the heart of the Marcellus and Utica Shale Gas Plays on September 21 and 22, 2016 at the David L. Lawrence Convention Center in Pittsburgh, PA. In addition to several keynote presentations, the conference will feature daily educational sessions exploring various technical and public affairsrelated topics. Registration is now open, offering special member and early bird rates. A variety of sponsorships offering comprehensive entitlements are available, including general session presentations, luncheons, networking events and other branding and marketing opportunities. for more information and to register for the conference, visit shaleinsight.com. WORLD DEMOLITION SUMMIT 2016 . Demolition event moves to the USA for the first time . Online registration is now open for event, taking place on 14 October, 2016 . Deadline for entries to World Demolition Awards is 30 June, 2016 An international line-up of expert speakers has been confirmed for this year’s World Demolition Summit (WDS), which takes place in Miami, Florida on 14 October – its first time in the USA. The Summit, always previously held in Europe, is established as one of the major annual international events for the demolition industry. More information and online registration is available at the conference website: www.khl.com/wds. Companies are also encouraged to enter the 2016 World Demolition Awards, which are the most prestigious awards for the worldwide demolition industry, judged by a panel of independent experts. There are 11 categories and the awards are free to enter. The deadline for entries is Friday, 30 June. The entry forms can be downloaded from the event website at www.khl.com/wds.

EMPLOYMENT OPPORTUNITY $3.00

ed Publish Nationally

d 1957.” … Founde Newspaper )!! struction 0 '%% t Read Con 0 ion’s Bes “The Nat &"+'&

Regional Sales Manager - Western Edition

ern West n Editio

om uide.c mentg onequip nstructi www.co

rado 0 in Colo -7 I f o n o Porti ll Closes Rock Fa . IX

• Vol 6, 2016 March

)/% &

• • No. 5

*#$

+ )$-! 0

,""$!)' te 70 in on Intersta l in incident Feb. 15 is stil rock fall A large rn Colorado on edied. nwood este Northw s of being remurred in Gle around ces the pro rock fall occ rfield County,ent of Ga tm in The par is De traffic which Canyon,a.m. Colorado) crews flaggedto clear d OT 2:30 tion (CD as they workein the same day e incident Transporta t night. out the through A second slid9:03 p.m. thased I-70 boulders. occurred at OT fully clo location hour later, CDsafety. was on About anthe canyon for hazards teamn by helthrough y, CDOT’s geoted the locatio s damInitiall also evalua that there wa and ge d and the site They determine ining wall, brid e icopter. roadway, reta ond slid the to sec age orted. ght in the guardrail.i-truck was cauinjuries were rep A sem ed, but no ! ! " abl "! dis ( and % *!! / )!& PONDENT RES CEG COR

o ation phot in nt of Transport o Departme nt on I-70 ve/Colorad Tracy Trulo kfall incide

. 15 the Feb ed. ge in vy dama re report ed hea injuries we No i suffer A sem ood Canyon. Glenw

roc

artners ore Seattle Tunnel P Mining M s d e e 99 Nev. N Mine umes SR Time onnd Status Res rfu $ Supe Alaska Spends $4 3M to Upgrade D alton Hwy.

Published Nationally

$3.00 quality work and the ed tunnel /ations of avaexc • Updatluding calcul ed d during Western inc plans, l remove has receiv wit Ed Partners resume tun- amount of soitunnel ring. sonnel ith-ion Tunnel Seattle l permission toSR 99 Tunnel tion of each ent of key per gram. pro nm • Vol. IX • No. onaructio on the after Read Const 9• • Realig conditi assurance protocols. ! '-# $ '"+ n Newspaper… mining “susrations . ) Founded 1957.in their qualitylity assurance positions (!"$ )%$ neling opeSTP resumed key lifted themin ing ” • Ne www ! w qua . .construc nel at on. Project.T con ditionally t. hal %##ted ' y rati quipme " ! et- tguid w personing opetione men .• Ne '&&!) WSDO for cause” thaivities in Januar , e.com ..........4 l regtunnel daily tunneling pants / '++ D PRESS by federa hin the tici Contents pension ging-related act idents. ATE dline set e needs more ing wit• Restructurede additional par inc dea lift bar Table of ASSOCI a ety for to saf and stat ons two the ) Facing includ osition diction 11-14 P will be ings that ols. Se following t of the conditi Nev. (AP Sandoval saidlong-held opp ong the n to con se , t ST en NO se, .. tall an RE its cau protoc the decisio As par sion for cau rd and ins ed am end - %'" Attachm.................... , Gov. Bri s. andWSDOT made suspension for evaluwa #- a mine list pen ether to%+ vad tors for .... ring sus wh ula .... nel nel iCEG ide the .... erts tun Ne DENT CORR tun the .. to dec ned ESPON icials not s. mitted totely 25 concretest demonstrate tionally lift of tunneling exp per r Section-27 timeing an abandotaminated site him ency off ADOT&P ima F photo ( "! tion Ag n’t hear from ton’s .25 & Traile hav they mued a number of after its team approx The Protec most con Trucks........................ y did *!! this time, entalDalto conHigh nmnstru nation’s Enviro waycing Yeringfund’s During y have implement Reco thant if the ........ & can safely ction month poscte pla U.S. proje Super 32 pro al lastern $ )$ that the to ensure they nges include: mally oninthe Alask for dar ........ # fied Sandovnorth a has mineunder % &len & # # they’dsever changes ing. These cha s% Ca per $ federal rch-. cop a al Jan. 29,gone Ma modi min Busines nda as e by ficatio ady p n tinu soo asaco a result t asweath eral hel e isnsalre ....33-43 former An y Lisof er-rel ated ught fed era min condi Priorittions. Section Initia War-II n that inbro NationalWo rldwith atiobegun Recycling ignlly a ades ( "! The 2015 $27 ......46-59 nd site, *!! million conSection Superfustruction contra Cruz Constructict awarded to The Dalton High Auction .58 of the project on, the scope is considered way ex ........ Ind encom vital rs passed infrastructure se reconstruction for the Adverti Highway from of the Dalton state. mi. post 401 to that included raisin 414, with impro vements verts and surfac g the grade 7 ft. (2 m), replacing culextended south ing the gravel road. The projec "& ! % increased to $43to mi. post 397 and the contrat was soon #$ "& ! ' % $ as well as repair million to cover the additi ct amount ADOT&PF photo onal roadway s due to flooding.

“The Nation’s Best

May 1, 2016

(

% & %

# $

$%$ (

Variables consi figuration of dered for breakup and the rate ice in the Sag River;flooding risk include the the snowpack of thaw they amou initiate. ; and spring nt and contemperatures

Groups Urge C Address Workeongress to Gov. Fallin OKs r Shortage Com pletion of Cultural Center

Leading const tions are callin ruction industry organizatechnical educag on Congress to make caree

advantage of new

oppor Table of Cont ity. In a letter tion (CTE) a top policy prior-r confronted with a new tunities, they are ents ................ challe to 4 Associated Equiplawmakers coordinated by of skilled technical workers.”nge: a shortage ment Distributor The letter from and delivered s (AED Atachment Secti const on ......11-14 ciations urged on April 18, 23 national asso-) supplier and labor organ ruction, contractor, Senate to swiftlmembers of the House and the stark findings of izations highlighted a Truck & Traile y reauthorize American Indian Cultural progr and improve study sponsored by the recently-released Center & Museum photo ........................r Section ........ work ams designed to help train AED That ..............25-27 ers. technical Colle report, prepared by resear Foundation. chers ge of William The groups and Mary, foundat the Recycling Secti passing transp praised Congress for recently equipment technician the ortati on ........33-42 the shorta difficulty recruion and tax bills but said dealers approximately $2.4 ge is costing in lost revenue ting workers threat billion per year to undermine the Auction Secti and econo ened a lack )! *## ()%'on ..........46-5 of “hard skills” mic activity. Citing “By restoring economic benefits. 5 %$ & as al transportati near-term certainty to feder- nician positions are goingthe top reason techBusiness Calen on unfilled, the study dar ............47 through passage ofprograms and tax policy noted that vacancies at const ruction equip in late 2015, Cong the FAST and PATH Acts ment dealerships remai n open for longe Advertisers Index growth in const ress has set the stage for than three times the nation r ..............54 busin ruction, manu al average. “The Cost work factur overruns led ess purchasing force ing, to political ,” the letter and construction equip challenges facing the and a shift “However, disag said. as companies prepare to take

ment indus unique,” AED President & try aren’t CEO Brian ( &

in priorities reements American India that halted work on the now an empt n Cultural Center and y concrete-a looms over two nd-steel curioMuseum, sity that town Oklahomainterstate highways near downCity.

Construction Equipment Guide, the industry’s leading trade publication, has an opening for a regional sales manager for our Western Edition. The qualified candidate will be working with equipment manufacturers and dealers in southern California, Arizona, Utah and Nevada to create and maintain successful digital and print advertising programs, as well as assisting customers with executing dynamic public relations campaigns.

Regional Sales Manager - Southeast Edition Construction Equipment Guide also has an opening for a regional sales manager for our Southeast Edition. The qualified candidate will be working with equipment manufacturers and dealers in Florida to create and maintain successful digital and print advertising programs, as well as assisting customers with executing dynamic public relations campaigns Candidates for both positions must have a successful track record in outside sales, and excellent verbal and written communication skills. Knowledge of the heavy equipment industry a plus. Past experience should demonstrate self-starting mentality, strong work ethic and record of high achievement. Construction Equipment Guide offers a competitive salary, high commission potential, paid training, health insurance, 401K, and company car. Email resume to tmckeonjr@cegltd.com ®

www.constructionequipmentguide.com

Page 84 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $115 • Color $165

CLASSIFIEDS Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 15-16 TM

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034 MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 14-15 DH

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 2011 JCB JS260, Cab Heat/AC, Quick coupler, 3,205 hours, Good-Rental Ready condition ....................$86,900.

EXCAVATORS Hydraulic Excavators Kobelco SK140 Excavator, s/n 8425, Hyd. Cab, Generator, Grapple bucket, Runs well ...... ..................................$72,500.

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 14-15 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 14-15 DH Call McLaren 888-492-4230

REDUCED PRICE

Gibson Machinery, LLC 440-439-4000 2012 JCB JS160, Hydraulic Excavator, 4,010 hours .......... ..................................$74,900. Casey Equipment Company 224-200-4211

LOADERS Crawler Loaders

Casey Equipment Company 847-437-8686

2012 John Deere 850K XLT,

Mini Excavators

3’’ 6-way blade, 23.5 pads,

Cab w/ AC, 205HP, Tier 4, 12’

Doosan DX63 Excavator, s/n 1189, Runs well, 45 hours $89,900.

Winch rear screen, 1,221 hours

Gibson Machinery LLC 440-439-4000

Illinois Truck & Equipment

................................$184,500.

815-941-1900

2004 Cat 330CL Excavator, 9132 Hrs, 247 HP C9 Diesel, 12’9” Stick, 60” Bkt, Extra CounterWeight for Heavy Lifting, Cab w/Heat & AC, AM/FM and Fresh Epoxy Paint. Above Average Leak Free Machine. A Must See ...Asking $75,000 Call Pieper Inc 319-372-2276 14-15 JM

2009 Liugong CLG922 LC, A/C, Heat, UC 60%, Fixed Thumb, Plumbed for Hammer, Installed Reman Hydraulic Pump on 09/24/13, Stock# 568, 3294 Hrs, 155 Horse Power.............................................$47,000 Call Jon 812-282-2800 14-15 EB

see your bargain aD in color.

only $50 extra FOR 2 INSERTIONS

2012 Liebherr L528 2 Plus 1 Loader, 134HP John Deere Diesel, Hyd. Disconnects, 18,740 LB Tipping Point, 28,000 Lb Operating Weight, 3440 Hrs, Super Smooth Machine, Completely Reconditioned, Looks & Operates Like New! SN: VATZ0660AZ301908012....... .........................................................................$92,500 Jerry/Justin 330-878-6630 15-16 EB www.HooversTruck.com

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 15-16 EB 614-395-4064

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL? Construction Equipment Guide is THE Place to List It!

ONLY 2012 Vac-Tron HTV 1850 Skid Mounted Vacuum Excavator, Ready to ubolt to a 52,000 GVWR truck. Self contained unit. 1800-gallon debris tank, 2400 CFM, hydraulic lift rear door, 400 gal water tank, 6 way hydraulic boom, wireless remote.......... ....................................................................$45,000 Call Brian at 352-728-2222 15-16 JV

$40

2 InSERTIOnS In OnE REGIOn (northeast, Southeast, Midwest, West) 30 words or less - $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.

Call 800-523-2200 or go online to place your ad:

www.constructionequipmentguide.com/pages/customer/classifieds.asp and place your ad through our website and we will contact you!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 85

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: CONSTRUCTION & AG MANUALS NEW OR USED BUYING NEW OR USED CONSTRUCTION AND AGRICULTURE SERVICE, PARTS AND OPERATOR MANUALS. EQUIPMENT DEALERS & PRIVATE COMPANIES, IF YOU HAVE MANUALS JUST SITTING ON THE SHELF, AND YOU NO LONGER NEED THEM PLEASE GIVE ME A CALL OR EMAIL. I BUY LARGE AND SMALL LOTS. JOHN DEERE, CAT, KOMATSU, CASE, NEW HOLLAND, VOLVO, DOOSAN AND SO ON. CONTACT: JOHN WHITNEY PH: 5308640771 EMAIL: WHITNEYJ65@YAHOO.COM FAX: 5308640771 –––––––––––––––––––––––––––––––– WANTED: CASE 850D LOOKING FOR LOW HRS.CASE 850D PREFERABLY WITH A WINCH CONTACT: JAMES HOPKINS EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: ENCLOSED CAB FOR GALION 503L I AM LOOKING FOR AN ENCLOSED CAB FOR GALION 503L ROAD GRADER, THAT I CAN INSTALL AIR CONDITIONING IN CONTACT: RICHARD PH: 817-219-2521 LEAVE MESSAGE EMAIL: LINDALOUK@HUGHES.NET –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER D11T BULLDOZER D11T ENC CAB WITH RIPPER BETWEEN 2000 AND 3000 HOURS. CONTACT: JEAN MAURICE BOUTIN PH: 1 450 346 8975 OR 1 514 386 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: FINAL DRIVE, 120B CAT P/N 1R5123 CONTACT: WAYNE PH: 912-682-4536 EMAIL: DRYBRANCHVILLAGE@GMAIL.COM FAX: 912-239-5594 –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D6MXL WITH RIPPER UNDER 6000 HOURS ONLY I NEED 2 NOT ADVERTISED USER NEAR NEW YORK UNDER 25000US NO JUNK CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K WHEEL LOADER 4 YD GENERAL PURPOSE BUCKET CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: NEEDED: CHALLENGER 865 OR 875 UNDER 4000 HRS CONTACT: GREG MARTIN EMAIL: MACHINERYMART@ MIDOHIO.TWCBC.COM ––––––––––––––––––––––––––––––––

WANTED: PEGSON XA / XR 400 TRACK JAW CRUSHER LATER MODEL, LOW HOUR EAST COAST LOCATION PREFERED CONTACT: RICHARD 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: KOMATSU HD 1500 NEED FRONT WHEEL LH - RH FOR A KOMATSU HD 1500 OFF HIGHWAY TRUCK. FRONT SUSPENSION/SPINDLE + BRAKE ASSEMBLY + WHEEL HUB ASSEMBLY CONTACT: ORIEL BASTIDA PH: 005114512562 EMAIL: ORIEL@CCI.PE FAX: 005114519923 –––––––––––––––––––––––––––––––– WANTED: YANMAR Y10W OR Y10W-1 ANY CONDITION RUNNING OR NOT RUNNING OR FOR PARTS ONLY. CONTACT: GEORGE VARSHOCK PH: 619-933-7806 EMAIL: GVARSHOCK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: WE ARE LOOKING TO PURCHASE CAT 950 , WELL MAINTAINED ORIGINAL PAINT YEAR 1975-UP IMMEDIATE PURCHASE CONTACT: DAW ELGHABER PH: 407-926-0351 EMAIL: INFO@GCIGROUPLLC.COM FAX: 407-926-0351 –––––––––––––––––––––––––––––––– WANTED: EXCAVATOR CAT 345CLC BETWEEN 6000 - 7000 HOURS. NO PAST REAL HOURS ON THE FRAME AND METER NEAR NEW YORK. ONLY CONTRACTORS NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADERS AND MOTOR GRADER WE ARE LOOKING TO BUY BELOW MACHINES. CAT WHEEL LOADER 936E, 950B, 950E, 966D, 966F, 966H, 972G AND 970F. CAT MOTOR GRADER: 140G, 140H AND 14H I BUY RUNNING OR NON RUNNING MACHINE. PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA PH: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM ––––––––––––––––––––––––––––––––

WANTED: COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATOR EX200 AND EX400 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE PH: 713-659-0593 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: WE ARE LOOKING TO BUY DYNAPAC ROLLER CA25 AND CA251 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM SUNESARA PH: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR CAT 637-OR 657 D,E,F...SCRAPERS....NOT COAL HAUERS....REMAINED MACHINES PREFERRED..... CONTACT: DALE PH: 360-551-9778 EMAIL: DALE.SALES.HEH@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: KOMATSU 380 JG-1, 580 OR 550 TRACK JAW CRUSHER LATER MODEL, LOW HOUR, WORK READY USA LOCATION CONTACT: RICHARD PH: 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: REQUIRED MACHINES FOR PURCHASE COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: 6" TO 12" L39 KUBOTA BACKHOE BUCKET BUCKET & A HYDRAULIC THUMB FOR L39 BACKHOE CONTACT: RALPH STEWART PH: 662-327-3552 EMAIL: RALPHCSTEWART@ BELLSOUTH.NET FAX: 662-327-3552 –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT WANTED TO BUY WE BUY HEAVY EQUIPMENT AND TRUCKS! LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM ––––––––––––––––––––––––––––––––

WANTED: SKID STEERS AND MINI EXCAVATORS. CONTACT: JOE DIRT MACHINERY PHONE: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINES.COM FAX: 570-364-5200 –––––––––––––––––––––––––––––––– WANTED: WANT BULLDOZER WANT TO BUY BULLDOZER D9N ENC CAB WITH RIPPER D9R, ENC CAB WITH RIPPER D10R ENC CAB WITH RIPPER KOMASTU 155AX-6 SS RIPPER 2012 AND UP NO PAST 4000 HOURS ALL UNIT FROM USER NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WE BUY OILFIELD EQUIPMENT WORKING OR NON WORKING WANTED: FORKLIFTS WE PAY TOP DOLLAR. WE ARE LOOKING TO PURCHASE CONTACT: JAMIE MILLER YOUR WORKING AND NON WORKING PHONE: 713-256-6006) 80'S 90'S AND LATE MODELS. ALL EMAIL: JMILLER.SOUTHERNMANMAKES AND MODELS!! CASH ON THE CHINE@GMAIL.COM SPOT!!!! –––––––––––––––––––––––––––––––– CONTACT: JOHN WANTED: DEERE 644K WHEEL PH: 832-900-5824 LOADER 4.0 YD. G.P. BUCKET EMAIL: JNICHOLAS.NICHOLAS CONTACT: FRANK @ GROFF TRACTOR MACHINE@GMAIL.COM PHONE: 1-800-33-GROFF –––––––––––––––––––––––––––––––– EMAIL: FRANKHORAN@ WANTED: BACK HOE REAR BUCKET GROFFTRACTOR.COM REAR BUCKET FOR NEW HOLLAND FAX: 732-780-3618 555D 1996 MODEL –––––––––––––––––––––––––––––––– CONTACT: JOHN WANTED: CAT WHEEL LOADERS EMAIL: JRELKHUNT@AOL.COM I AM LOOKING TO BUY RUNNING OR –––––––––––––––––––––––––––––––– NON RUNNING CAT WHEEL LOADERS , WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND MOTOR GRADER AND DOZER. CONTACT: RIZ SUNESARA FORKS CONTACT: FRANK @ GROFF TRACTOR PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM PH: 800-33-GROFF FAX: 832-528-0786 EMAIL: FRANKHORAN@ –––––––––––––––––––––––––––––––– GROFFTRACTOR.COM WANTED: DORNIER LOOMS 3000FAX: 732-780-3618 4000MM –––––––––––––––––––––––––––––––– PREFER MODELS PTV/PTS FOR TECHWANTED: NEED EXCAVATOR EX 5600 NICAL TEXTILES. 3 LOOMS NEEDED. IF HITACHI YOU HAVE ANY, PLEASE SEND FULL WANT TO BUY NOW EXCAVATOR DETAILS, PICTURES AND PRICE. HITACHI EX 5600 «35YARD« BETWEEN CONTACT: VICTOR LEBRON 5000 AND 12000 HOURS REAL HOURS PHONE: 864-574-0404 ON THE METERS AND FRAME NOT EMAIL: APESALES@AMERICANPLANADVERTISED IN THE WORLD USER TANDEQUIPMENT.COM ONLY OR REPOSES BANK FAX: 864-576-7204 CONTACT: JEAN MAURICE BOUTIN –––––––––––––––––––––––––––––––– PH: 1-450-346-8975 OR 1-514-386-8975 NEEDED BULLDOZER D10N AND D11N EMAIL: JEANMAURICEBOUTIN@ ENC CAB WITH RIPPER GOOD UNDERVIDEOTRON.CA CARRIAGE, USA WELCOME EUROPE –––––––––––––––––––––––––––––––– MUST BE GOOD PRICE. I NEED 5 UNIT. WANTED: LOADER FOR 255 MF CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR I LIVE IN CENTRAL KY 1-514-386-8975) CONTACT: HARRY EMAIL: PH: 270-402-5781 EMAIL: RICEPRESTON75@YAHOO.COM JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– LOOKING FOR 16" RUBBER PADS OR WANTED: SMALL DOZER 16" CLIP ON PADS FOR A CAT 305 MIDI SMALL USED DOZER WITH 3PT HITCH EXCAVATOR - HWJ03223. AND 540RPM PTO CONTACT: MARCEL CONTACT: TONY PHONE: 519-686-1123 PH: 217-773-2670 EMAIL: EMAIL: TONYMATHEWSON@YAHOO.COM SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: WIRTGEN MILLING MACHINE WE NEED TO BUY WIRTGEN MILLING MACHINE W2100 AND W2200 2000 AND UP WITH MOBA CONTROLLER, IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM SUNESARA PHONE: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: KOMATSU D37-P-2 TRACK CHAINS AND SPROCKETS IN GOOD COND CONTACT: TOM EMAIL: TSDREDGING@MSN.COM –––––––––––––––––––––––––––––––– WANTED: TOOLCAT (USED) MADE BY BOBCAT CONTACT: MARC JONES PH: 6086954397 EMAIL: MJOSYENE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D8T WITH 45000 HOURS WANT TO BUY USA FROM USER 2 BULLDOZER D8T ENC CAB SEMI U WITH RIPPER WITH 45000 HOURS AND UP WITH UNDERCARRIAGE POOR MUST BE ALL PIECES MUST BE RUNNING I NEED 2 FAST CONTACT: JEAN MAURICE BOUTIN PH: 1 450 346 8975 OR 1 514 386 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CAT DRIVE MOTOR-PART # 1390848 CAT DRIVE MOTOR (ALSO CALLED A TRAVEL MOTOR), FOR A CAT EL300B EXCAVATOR. THE CAT PART # IS 1390848. CONTACT: NICK PH: (304) 232-1333 EMAIL: WVCOINC@AOL.COM FAX: (304) 233-1333 –––––––––––––––––––––––––––––––– WANTED: DEERE 644K DEERE 644K 4.25 CUBIC YARD G.P. BUCKET CONTACT: FRANK PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: CAR HAULER TO HAUL 8' WIDE X 20' SHIPPING CONTAINERS LOOKING FOR A CAR HAULER THAT HAS A FLATBED THAT EXTENDS DOWN AND OUT. I USED TO USE ONE OF THESE TO HAUL 8' X 20' MOBILE STORAGE / SHIPPING CONTAINERS. THE THING IS... THE BED HAS TO BE 102" WIDE TO ACCOMODATE THE 96" WIDE SHIPPING CONTAINER! CONTACT: SHANE TERRY PH: 951-219-4210 EMAIL: SHANETERRY27@YAHOO.COM FAX: 951-468-4522 ––––––––––––––––––––––––––––––––

Page 86 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Queretaro, Mexico Fri., July 29, 2016 For: Late Model Construction Equipment & more • Chicago, IL Fri., July 29, 2016 For: Snow Extravaganza Phase 1 • Racine, WI Sat., July 30, 2016 For: Rental Fleet Construction, Logging & Agricultural Equip. • Webster, MA Sat., August 6, 2016 For: Liquidation Construction Equipment • Hagerstown, MD Thurs., August 11, 2016 For: Late Model Construction Equipment & more • Williamsport, PA Fri., August 12, 2016 For: Large Job Completion of Construction Oilfield Equipment • Atlantic City, NJ Sat., August 13, 2016 For: Snow Extravaganza Phase 2 • Watertown, NY Sun., August 14, 2016 For: Estate Auction, Construction Equipment & more • Orlando, FL Wed., August 17, 2016 For: Rental Return of Late Model Construction Equipment • Buffalo, NY Sat., August 20, 2016 For: Complete Liquidation construction equipment • Las Vegas, NV Sat., September 10, 2016 For: Large Job Completion & Rental Returns Auction • Auburn, ME Fri., September 16, 2016 For: Retirement Liquidation, Late Model Construction Equipment • Marietta, OH Sat., September 17, 2016 For: Late Model Construction Equipment & more

• Riverside, CA Sat., July 23, 2016 • Manchester, NH Tues., July 26, 2016 • Albuquerque, NM Wed., July 27, 2016 • Chicago, IL Thurs., July 28, 2016 • Chehalis, WA Fri., July 29, 2016 • Denver, CO Thurs., August 4, 2016 • Orlando, FL Tues., August 16, 2016 • Tipton, CA Wed., August 17, 2016 • Columbus, OH Thurs., August 18, 2016 • Williston, ND Thurs., August 18, 2016 • Houston, TX August 24 - 25, 2016 • North East, MD Thurs., August 25, 2016 • Atlanta, GA Thurs., September 15, 2016 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Riverside, CA Sat., July 16, 2016 For: Monthly Public Auction • Sacramento, CA Sat., August 13, 2016 For: Monthly Public Auction • Riverside, CA Sat., August 20, 2016 For: Monthly Public Auction • Portland, OR Thurs., August 25, 2016 For: Public Consignment Auction • Sacramento, CA Sat., September 10, 2016 For: Monthly Public Auction BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY July 20, 2016

• Atlantic City, NJ Sat., September 24, 2016 For: Rentals! Construction Equipment & more

• ONLINE ONLY July 27, 2016

• Rochester, NY Sat., October 8, 2016 For: Large Municipal Construction Equipment & more

• ONLINE ONLY August 10, 2016

• Houston, TX Fri., October 14, 2016 For: Special Large Construction Equipment & more • Chicago, IL Sat., October 15, 2016 For: Snow Extravaganza Phase 3 RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Fort Worth, TX July 20 - 21, 2016 • Los Angeles, CA Fri., July 22, 2016

• ONLINE ONLY August 3, 2016

DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., September 17, 2016 For: Construction Equipment • Prospect, CT Sat., December 3, 2016 For: Construction Equipment

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Philadelphia, MS September 14 - 15, 2016 For: Huge 2-Day Public Auction

J. STOUT AUCTIONS www.jstoutauction.com 360-567-8154

• Philadelphia, MS November 16 - 17, 2016 For: Huge 2-Day Public Auction

• Portland, OR Wed., July 27, 2016 For: Heavy Equipment & Commercial Truck Auction

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA July 28 - 30, 2016 For: Summer Construction, Truck & Farming Equipment HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • South Beloit, IL Sat, July 23, 2016 For: Heavy Vehicles & Equipment • Charlotte, NC Thurs., July 28, 2016 For: Heavy Vehicles & Equipment

• Marietta, PA Fri., August 26, 2016 • Shrewsbury, MA For: Truck, Trailer & Equipment Sat, August 6, 2016 For: Heavy Vehicles & • Marietta, PA Equipment Fri., October 14, 2016 For: Truck, Trailer & Equipment • Philadelphia, PA Sat, July 20, 2016 • Marietta, PA For: Heavy Vehicles & Fri., December 9, 2016 For: Truck, Trailer & Equipment Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY July 27, 2016 • ONLINE ONLY August 10, 2016 • ONLINE ONLY August 31, 2016 • ONLINE ONLY September 14, 2016 • ONLINE ONLY September 28, 2016 • ONLINE ONLY October 12, 2016 • ONLINE ONLY October 26, 2016 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Souderton, PA Wed., July 20, 2016 For: Surplus Liquidation Rorvik General Contracting, LLC I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., September 9, 2016 For: Heavy Equipment

• Salt Lake City, UT Thurs., August 25, 2016 For: Heavy Vehicles & Equipment • Rome, NY Sat, July 27, 2016 For: Heavy Vehicles & Equipment JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kenmore, WA Sat., July 30, 2016 For: Heavy & Contractors Equipment & Vehicles • Kenmore, WA Sat., October 1, 2016 For: Heavy & Contractors Equipment & Vehicles • Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY August 3 - 10, 2016 For: Absolute South Central US Office & Housing Trailer Auction

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Princeton, WV Tues., July 26, 2016 For: One Owner Fleet Reduction • ONLINE ONLY July 28 – August 2, 2016 For: Construction Equipment, Trucks, Trailers & related items • Pelzer, SC Thurs., August 4, 2016 For: One Owner Absolute Truck/Trailer Auction • ONLINE ONLY August 8 - 11, 2016 For: Construction Equipment, Trucks, Trailers & Related items • Augusta, GA Thurs., August 18, 2016 For: One Owner Absolute Retirement Auction • ONLINE ONLY August 22 - 25, 2016 For: Construction Equipment, Trucks, Trailers & Related items • Pelzer, SC Thurs., September 29, 2016 For: Construction Equipment, Trucks, Trailers & more McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., August 9, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., September 13, 2016 For: Tractor, Farm & Construction Equipment PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT August 5 - 6, 2016 For: Major Public Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., July 21, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., July 28, 2016 For: Construction Equipment • ONLINE ONLY Thurs., August 11, 2016 For: Construction Equipment • ONLINE ONLY Thurs., August 18, 2016 For: Truck & Trailer Auction

ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., September 14, 2016 For: Construction Equipment • Denver, CO Wed., November 9, 2016 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Seneca Falls, NY August 11 - 12, 2016 For: Trucks, Large Construction Equipment & more STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Litchfield, MN Tues., July 26, 2016 For: Secured Party Construction Auction • ONLINE ONLY August 3 - 10, 2016 For: Construction Equipment, Ag, Trucks & more • West Fargo, ND Wed., August 3, 2016 For: Aglron West Fargo Event • Boone, IA Thurs., September 1, 2016 For: Construction Equipment & more TRAIMAN REAL ESTATE AUCTION COMPANY www.traiman.com 215-799-0655 • Berks County, PA Thurs., July 28, 2016 For: Real Estate Auction UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., August 26, 2016 For: Construction, Utility & Forestry Equipment WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., September 17, 2016 For: Construction Equipment, Truck & Trailer Auction • Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction

• Brooklyn, MS August 5 - 6, 2016 For: Early Fall Public Auction

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990

AL: 334-693-2540

IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426

JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800

• Lebanon, TN Sat., September 10, 2016 For: Construction Equipment

• Ashland, OH Thurs., September 22, 2016 For: Construction Equipment

• Philadelphia, MS July 20 - 21, 2016 For: Huge 2-Day Public Auction

• Houston, TX Tues., September 20, 2016 For: Unreserved Public Auction

• Villa Rica, GA Wed., September 21, 2016 For: Heavy Equipment Auction

• Lebanon, TN Sat., December 3, 2016 For: Construction Equipment

• Darlington, PA Thurs., November 17, 2016 For: Construction Equipment

DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768

• Foley, MN Fri., December 2, 2016 For: Heavy Equipment

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 87

WEEKLY ONLINE AUCTIONS

EVERY THURSDAY www.IronPlanet.com

2012 Cat D5K XL Crawler Tractor

WE DO THE HEAVY LIFTING

2012 Cat TL1055 Telehandler

Front-end loaders move tons of weight. At IronPlanet®, we’re used to moving weight like that, too. We do the heavy lifting of helping sellers reach buyers from around the world. Once together, they make big transactions on their heavy-duty equipment.

2007 Cat 320CL Track Excavator

2012 Volvo BL60B 4x4 Backhoe Loader

2004 Cat CB-534D Vibratory Double Drum Compactor

www.IronPlanet.com | 866-954-0397 Download IronPlanet’s Mobile App Follow Us Cat 980C Wheel Loader

Page 88 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 89

Unreserved Unr reserrved p public ublic equipment auctions FFast, ast, fle flexible exxible le leasing asing and fin financing ancing aavailable vailable – u up p tto o 100%, $0 do down wn

2008 Caterpillar 321DLCR | Manchester

2011 Case 590SN 4x4 | Manchester

2009 Mantis 3612 18 Ton | Chicag go

2008 Caterpillar 272C XPS 2 Speed | Manchester

2007 Caterpillar 972H | Manchester

Caterpillar D4G XL | Manchester

2012 Watson EDT-5 w/2012 John Deere 350G | Chicag go

2013 Case 721F | Orlando

32,975+ 32,975+ items items in 70+ auctions inc including luding Manchester, NH Albuquerque, NM Chicago, IL Chehalis, W WA A Denver, CO Orlando, FL

Jul 26 Jul 27 Jul 28 Jul 29 Aug 4 Aug 16

Tipton, CA Williston, ND Columbus, OH Houston, TX North East, MD Atlanta, GA

Aug 17 * Aug 18 Aug 18 Aug 24–25 Aug 25 Sep 15

Auctioneer Auctioneer Fr Frederick ederick R. VVilsmeier ilsmeier Lic # 6065, Auctioneer Auctioneer Gregory Gregory S. S. Fuqua Fuqua Lic # 3078, Kevin Kevvin L. Perry Perry License # 1763, James L. Valentine Valentine License # 1764, Auction Auction Firm License # 444.000193, Auctioneer Au ctioneer Gr Greg eg M. Highsmith Highsmith # 441.000865, Au Auction ction CCompany ompany License # 1981, Motor Motor Ve Vehicle ehicle Dealer Dealer License #1539, Auction Auction Business Business License #AB303, Au Auctioneer ctioneer Gregory Gregory S. S. Fuqua Fuqua # AU2824, AU2824, Auction Auction CCompany ompany Bond #0470724, Au Auctioneer ctioneer Greg Greg Highsmith Highsmith Bond # 0470728, Ritchie Ritchie Bros. Bros. Auctioneers Auctioneers (America) (America) Inc. Inc. Auction Auction Clerk Clerk License #225, Auctioneer Auctioneer Gregory Gregory M. Highsmith Highsmith # 701, Au Auction ction Firm # 2008000166, Au Auctioneer ctioneer Frederick Frederick R. VVilsmeier ilsmeier # 2004000137, Auctioneer Auctioneer Chad Chad M. Johnson # 17668 *O *OAC. *OAC. Te Terms erms & cconditions onditions ap apply. ply..

Bid in person or online

Financing & leasing available

▸ No minimum bids or reserve prices ▸ Test and inspectt on-site ▸ Open to the public, free registration

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

rbauction.com See full auction & equipment listing gs at rbauction.com

Page 90 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

To Enter This Giveaway: 1 Click the Register Now banner at www.BuyJMAOnline.com 2 Register online or live for any of our auctions held June 1–August 1, 2016

NEW! with Full

1-844-450-6200 www.BuyJMAOnline.com

Warranty

MSAL 1255, SC 4283, AL 5287, FL AU4483, TX 17188, LA 1756 NC 9730, VA 2907004240, GA AUNR004103, KYRP3843 See Website For Full Terms and Conditions

Find us on social media!

Jeff Martin Auctioneers Announces New Vice President Jeff Martin Auctioneers Inc. announced today that Larry Goff has joined the company as vice president of operations and sales. Goff comes to Jeff Martin Auctioneers with extensive experience within the construction equipment industry, having spent the last 30 years working in multiple roles related to the retail and remarketing of construction equipment. Most recently he served as regional sales manager for one of North America’s largest Caterpillar dealerships. Prior to that, he worked for six years for IronPlanet and Cat Auction Services where he served as national accounts manager and director of national accounts. Goff will now be using his considerable knowledge and relationships within the heavy equipment and auction industries to help sustain the growth that Jeff Martin Auctioneers Inc. has enjoyed over the past several years, according to the company. Goff will be involved in the strategic planning and execution of operations at Jeff Martin Auctioneers as the company looks forward to continuing its recent success providing remarketing services to many large corporations and local contractors all over America in an efficient and professional manner. “I'm honored to be a part of the management team, and I look forward to contributing to the growth, history and legacy of JMA. With an expanded sales and management team, onsite, online and a daily auction venues JMA is positioned to serve buyers and sellers from around the globe,” Goff said. Jeff Martin, president/ CEO said, “I am thoroughly excited that Larry has decided to join our team. I am proud of

“I'm honored to be a part of the management team, and I look forward to contributing to the growth, history and legacy of JMA.” Larry Goff Jeff Martin Auctioneers Inc.

what we’ve been able to accomplish over the past seven years and wanted to make sure that whoever we hired would strive for the same level of quality that has become synonymous with the Jeff Martin name. We spent the last several months evaluating numerous candidates for this position and found a true professional to help guide this company. Larry recognized our commitment to quality and integrity when he decided to come on board, and we are thrilled that he chose to be part of the Jeff Martin Auctioneers family. His experience and professionalism will be instrumental in our continued growth as a company as we expand our presence within the market. ” For more information, visit www.jeffmartinauctioneers.com. Larry Goff has joined the company as vice president of operations and sales.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 91

2-DAY MAJOR PUBLIC EQUIPMENT & TRUCK AUCTION With Equipment From

BTB CONSTRUCTION, INC., CREAN EQUIPMENT, INC., JACOR, INC., OTHER AREA CONTRACTORS, HEAVY EQUIPMENT & TRUCK DEALERS & RENTAL COMPANIES 275 ROUTE 32, NORTH FRANKLIN, CT 06254

FRIDAY, AUGUST 5, 8:30 AM PARTIAL LISTING: EXCAVATORS: 2011 Cat 311D; 2009 Cat 311DRR; 2009 Cat 336DL; Cat M320 Wheeled; Cat M318 Wheeled; 2006 Cat 307C SB; 2005 Cat 313C; 2005 Cat 314CCR; 2003 Cat 314C; 2002 Cat 325C; 1998 Cat 345BL; 1998 Cat 311; 1998 Cat 315BL; 1994 Cat 325L; 1989 Cat E120B; 2008 Komatsu PC138USLC-8; 2007 Komatsu PC138USLC; 2008 Komatsu PC78US-6N0; 2007 Komatsu PC78MR; 2006 Komatsu PC300LC-7E0; 2003 Volvo EC55; 2002 Volvo EW170 Wheeled; 2004 Volvo 283; 2007 Deere 270DLC; 2001 Deere 230LC; 1994 Hitachi EX120-2; 1997 Hitachi EX100-3; 2007 Hitachi ZX75US-A; 2010 Hyundai Robex 55W-9 Wheeled; 2005 Kobelco SK250LC; 2004 Yanmar VI075-A; Mitsubishi MIS300LC-8; COMPACT EXCAVATORS: 2010 Cat 304CCR; 2014 Yanmar V1035-6A; 2005 Yanmar VI035; 1999 Airman AX35U; CRAWLER TRACTORS & LOADERS: 2004 Cat D5NXL Crawler Tractor; 1998 Cat D5M XL Crawler Tractor; Cat D6H Crawler Tractor; 2004 Komatsu D65PX Crawler Tractor; 2010 Deere 450J Crawler Tractor; 1987 Case 850D Crawler Tractor; 1984 Dresser TD20E Crawler Tractor; Dresser TD25G; Dresser TD15C Crawler Tractor; RUBBER TIRED LOADERS: 2011 Cat 930H; 2008 Cat 908H; 2003 Cat 902; 1998 Cat 938G; 1996 Cat 950F; 1991 Cat 966F; 1991 Cat 950F; 1987 Cat IT28; Cat 988B (Sold Offsite, FOB Pittsford, VT); 1985 Komatsu WA350-1; 2008 Volvo L60F; 1997 Deere 544H; Trojan 2500; Trojan 2000; Trojan 550C (Sold Offsite, FOB Pittsford, VT); TRACTOR LOADER BACKHOES: 2013 Cat 420F ST; 2012 Cat 420EIT; 2011 Cat 420EIT; 2011 Cat 420EIT; 2011 Cat 420EIT; 2008 Cat 420EIT; 2006 Cat 420EIT; 2005 Komatsu WB140; 1995 Deere 710D; 1984 Deere 710B; 2013 Case 580 Super N; 2006 Case 590 Super M; 2005 Case 580 M Series 2; 2005 Case 580M; 2001 New Holland LB115A; 1999 New Holland 575E; 1975 Ford 755; SKID STEERS: 2014 Cat 262D; 2014 Cat 259D; 2014 Cat 246D; 2007 Cat 272C; 2008 Bobcat 5250; 2008 Bobcat 5250; 2013 Volvo MC110C; 2007 Deere 332; 2005 New Holland LS170; 2005 Mustang 2054; 2003 Case 90XT; Gehl 5635SX Series II; COMPACT TRACK LOADERS: 2014 Cat 257D; 2013 Kubota SVL75; 150+ SKID STEER BUCKETS & ATTACHMENTS: Including Tomahawk GP, Grapple, Roc, & Stump Bkts; Fork Attachments, Mounting Plates, Hay Spears, Other MFG GP & MP Bkts, Rotary Mowers, Backhoe Attachments, Snow Pusher Blades, Sweepers, Augers; PAVING EQUIPMENT: Blaw Knox PF180H Paver; Powerbox T-450D Paver; Portable Asphalt Tank; CRUSHING & SCREENING: 2007 Pegson XR400 Premiertrac; 2006 Pegson XR400 Premiertrac; 2003 Pegson Premiertrac 1100X800 Jaw Crusher; Screener w/Conveyor; 24”x42” Stacking Conveyor; TUB GRINDERS: 1990 Farmhand 6650 S/A; LARGE GENSETS: 2006 Kohler 60REQ2JB; (2) Marathon 40kW; 1989 Multiquip 60 kW; Multiquip DCA70SSJLL; Multiquip DCA25SSIU; COMPACTORS & ROLLERS: 2013 Bomag BMP8500 Trench Compactor; 2013 Bomag BMP8500 Trench Compactor; 2009 Hamm 3205 Vib Roller; 2008 JCB VM1500 Trench Compactor; 2005 Cat CB-224E Dbl Drum Roller; Ingersoll Rand Vib Smooth Drum Roller; Hamm 3205 Vib Compactor; 1998 Benford TV1200DPR Tandem Vib Smooth Drum Roller; Western R2000 Roller Compactor; Stothert & Pitt Vib Roller; CRANES: 2001 Terex RT230 30 Ton Rough Terrain; BOOM LIFTS: 2005 Genie Z60-34; ROUGH TERRAIN FORKLIFTS: Sky Trak 8042; Case 580; MOTOR GRADERS: 1994 Dresser Galion 850; 1967 Austin Western Pacer; ARTICULATED & RIDGID FRAME END DUMPS: 2003 Cat 730 Artic; 1990 Volvo A35 Artic; Volvo A35 Artic; OVER 150+ HEAVY EQUIPMENT BUCKETS & ATTACHMENTS: Hyd & Mech Thumbs, Digging & Grading Bkts (Some Hyd Tilting), Quick Couplers, Frost Ripper Tooth For Excavator, GP Loader Bkts w/Teeth & BOCE, Kent, Rockblaster & MKB Hyd Hammers, Fork Attachments, Lifting Boom, Snow Plows & Much More; DMF Hi-Rail Gear; NPK Hyd Hammers, Fits Case Backhoes; SHEARS & GRAPPLES: Including Grapples (For Up To 60 Ton Class Machines), (2) 2015 Cat 349 5 Finger, 3 Over 2 Grapple; Genesis GDP900 Pro Rotating Shear w/Steel Jaws & Concrete Cruncher; TRUCK TRACTORS: 2010 Kenworth T800 T/A; 2010 Kenworth T800 T/A; 2009 Freightliner Cascadia; (2) 2007 Mack CXN; 1997 Freightliner FL106 T/A; 1984 Int’l S2200 S/A; 1982 Mack R688ST T/A; 1974 Ford L9000 S/A; Oshkosh T/A; TRI/A & T/A DUMPS: 2006 Mack CV713 Tri/A; 2006 Mack CV713 Tri/A; 2006 Mack CV713 Tri/A; 2006 Mack CV713 Tri/A; 2006 Mack CV713 Tri/A; 2005 Mack CV713 Tri/A; (2) 1991 Mack RD688S Tri/A; 1988 Mack R T/A; 1987 Freightliner Tri/A; 1986 Ford 9000 Tri/A; 1986 Mack RD6865X T/A; 1978 Mack DM685SX T/A; S/A DUMPS: 2002 Ford F450; 1999 Freightliner FL60; 1997 Volvo WG42T; 1993 Int’l 2554 4x2; 1993 GMC Topkick; Chevy 3500 Mason Dump; 2005 Dodge Ram 3500 Mason Dump; ROLLOFF TRUCKS: 2005 Kenworth T800; 2002 Mack RD6885; MIXER TRUCKS: 1989 Oshkosh Front Discharge Mixer; BUCKET & BOOM TRUCKS: 2003 Int’l 4400 S/A Boom Truck; DETACHABLE & LOWBED TRAILERS: 1988 Hyster 40 Ton Trl; DUMP TRAILERS: 2007 Montone Trl; 1985 Dorsey Trl; 1986 Fruehauf T/A 26’ Dump Trl; VAN, FLATBED & SGL DROP TRAILERS: 1994 Stoughton T/A 53' Van Body Sold w/Container Chassis; 1992 Great Dane Van Trl; TAG-ALONG & OTHER H.D. EQUIPMENT TRAILERS: 2005 Hudson Brothers T/A Tag Along Trl; 1999 Towmaster T-120D T/A Tag Along Trl; 1999 Evaco Tri/A Tag Along Trl; 1993 Interstate 20DTA Tag Along Equip Trl; 1985 Hudson Brothers Tri/A Tag Along Trl; 1973 Boone T/A 10 Ton Tag Along Trl; T/A Fixed Gooseneck 5th Wheel Trl; TANK LIVE BOTTOM TRAILERS: 1977 Fruehauf T/A; TRAILERS: 1995 Heil T/A 9500 Gallon Tank Trl; REEFER TRAILERS: Walsh W2RDT-20-40 T/A 40’ Trl; SERVICE & UTILITY TRUCKS: 2004 Chevy 2500HD Utility Truck; 2003 Ford F350 S/A Utility Truck; 2003 Mitsubishi Fuso 640 S/A Utility Truck; 2003 Mitsubishi Fuso FE145 S/A Utility Truck; 2002 Subaru Forester; 2000 Ford F550 Service Truck; 1999 Ford 450 Utility Truck w/Stahl Body & Heil Dump Insert; FLATBED & VAN BODY TRUCKS: 2007 Ford F550 S/A Flatbed Truck; 2007 Mitsubishi Fuso FM260 S/A Box Truck; 2006 Ford F550 Flatbed Truck; 2006 Ford F550 Flatbed Truck; 2003 Ford F750 S/A Box Truck; 2003 GMC Sierra 3500 S/A; 2000 GMC Sierra 3500SL S/A Flatbed Truck; 2000 GMC Sierra 3500SL S/A Flatbed Truck; 2000 Isuzu S/A Box Truck; 1999 Isuzu S/A Van Body Truck; 1998 Chevy 2500 Express Van; 1993 Int’l 4600 S/A Flatbed Truck; 1993 Dodge 350 Flatbed Truck; 1990 Chevy 3500 S/A Flatbed Truck w/250 Hydroseeder; 1990 Int’l 4900 S/A Flatbed Truck; Ford 600 Flatbed Truck; 1979 FWD BXU S/A Flatbed Truck; CAB & CHASSIS: 2002 Chevy T6500 S/A; 1994 Ford F700 S/A; 1990 Chevy C6500 S/A; 1986 Int’l 1900; REFUSE TRUCKS: 2003 Peterbilt 320 T/A; FLEET VEHICLES: 2015 Chevy Silverado 1500; 2014 Chevy Silverado 1500; 2009 Ford Crown Victoria Police Interceptor; 2008 Chevy 1500 Pickup; 2008 Chevy Silverado 1500 Pickup; (2) 2008 Ford F250; 2008 Ford Crown Victoria Police Interceptor; 2008 Dodge 2500HD Pickup; 2008 Dodge Grand Caravan; 2006 Ford F450; 2005 GMC 2500HD Pickup; 2005 GMC 3500 Tradesman Van; 2005 Dodge Dakota; 2003 GMC 2500HD Pickup; 2003 Ford F350 Pickup; 2003 Ford F150 Pickup; 2003 Ford Focus; 2003 Dodge Dakota Pickup; 2002 Chevy S10 Pickup; 2002 Ford Focus Wagon; 2000 Ford Ranger XLT Pickup; 2000 Chevy 2500 Pickup; 1999 Isuzu Trooper; 1997 BMW Z40 IL; 1997 GMC 3500HD; 1992 Ford F150 XLT; 1991 Ford F250 Pickup; 1974 Volkswagon Beetle; MOTORCYCLES: 1983 Kawasaki LTD250; BUSES: 1988 Silver Eagle 45’ Tour Bus; COLLECTOR VEHICLES: 1953 Ford F-750 Big Job S/A; SWEEPER & VAC TRUCKS: 1994 Ford L8000 T/A Vac Truck; Mobil 7200 Sweeper; Mobil 323C Sweeper; LARGE AIR COMPRESSORS: 2002 Ingersoll Rand 365; 2003 Atlas Copco XAS 96; 2004 Atlas Copco XAS 96; Atlas Copco XAS 186; Atlas Copco; SEA & STORAGE CONTAINERS: (20) 20’ & 40’ Storage Containers; EQUIPMENT & TRUCK PARTS & COMPONENTS: Including Excavator Booms, Sticks & Cylinders, Vandal Curtains, Tires, Dump & Utility Bodies, Engines, Transmissions, Lift Axles, Rims, Seats & Much More!

SATURDAY, AUGUST 6, 8:30 AM With Equipment From PRIME POWER EQUIPMENT & OTHERS PARTIAL LISTING: COMPRESSORS: WELDERS: LIGHT TOWERS: SCISSOR & PERSONNEL LIFTS: INDUSTRIAL FORKLIFTS: RECREATIONAL VEHICLES & GOLF CARTS: BOATS: CAMPERS: AG & UTILITY TRACTORS: AG IMPLEMENTS: ANTIQUE EQUIPMENT: OVER 30 LOTS OF ANTIQUE MARINE EQUIPMENT: UTILITY VEHICLES: SAWMILLS: WOOD CHIPPERS: COMMERCIAL LANDSCAPE & GROUNDS CARE EQUIPMENT: SEA & STORAGE CONTAINERS: UTILITY & LANDSCAPE TRAILERS: THREE PT HITCH ATTACHMENTS: LAWN & GARDEN: GARDEN CENTER: EQUIPMENT & TRUCK PARTS & COMPONENTS: WOODWORKING EQUIPMENT: METAL WORKING EQUIPMENT: JOB MATERIAL OVERUNS: SUPPORT EQUIPMENT: OUTBUILDINGS & TENTS: MISC: AND MORE!

Currently Accepting Quality Consignments CALL FOR INFORMATION AND PICTURE BROCHURES

ONLINE BIDDING THROUGH EQUIPMENTFACTS

Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100

275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900

www.petrowskyauctioneers.com

Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888

Page 92 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pacific Tri-Star Introduces China’s Sunward to U.S. Market A major heavy equipment manRob Gibb (L), president and founder of Pacific Tri-Star, and ufacturer based in China is looking Jun Wang, director of Sunward N.A., stand in the equipment to expand westward to the United yard in Farr West, Utah. States — with help from a dealer in Utah. Sunward Equipment Group, based in Changsha City, China, had been considering establishing a presence in the United States for several years, but momentum for the expansion picked up in 2015, when it began talking with Pacific Tri-Star of Ogden, Utah. “Sunward [Equipment] started looking at the North American market seriously in 2015, and they’d begun looking for dealer locations in the south and southeast, with intentions of setting up a North America distribution system,” said Robert Gibb, Gibb said some cus- recognizable brand components in president and founder of tomers already knew the the machines. Pacific Tri-Star. “Sunward Sunward brand, while “The Kubota engine is on the ultimately came to us in others did not. skid steer, and we also have a Utah because we’d had a “Probably one-third to Kubota engine on the mini 4-ton relationship with them half of them were aware excavators,” he added. “The larger since 2008, and that’s why of the Sunward name machines have the Isuzu engine, they decided to launch the over the years, having like the 15-ton excavator and the product from Utah for seen them at ConExpo,” 21-ton excavator. The SWE40 has their North America operhe said. “The others were a Kubota, but everything else ations.” seeing the equipment for under the 15-ton will be the Pacific Tri-Star had visthe first time in our yard Yanmar.” ited the Sunward Sunward Equipment manufacturers a wide here.” All the machines are either Tier Equipment factory several array of drilling rigs. Pacific Tri-Star’s new IV Interim or Tier IV Final. times in 2007 and 2008 Sunward customers have The customers, Gibb added, and the founder of Sunward, He pretty well ready for the market. liked what they’ve seen so far. also are confident that Sunward Qinghua, made a trip at that time to The impression I had was that they “They like quality of the will back their equipment here in Utah to do some research, to deter- are going after the export market machines and their competitive the United States. mine if the state would be a good seriously, and they know they have pricing,” said Gibb. “When they “They know that Sunward to have the performance, the saw the price, it got their attention North America will be here for entrance into the U.S. market. “We ordered some product at appearance. And they have it. and it got them in the door. Then, support, parts and back-up, and “Now, we have about 50 they saw the machines and operat- that’s made a very big difference,” that time,” said Gibb. “But then, after the economy crashed, we Sunward machines here, with ed them. They see the Yanmar and he said. “They know that the comkind of just held dormant at that about that many more machines Kubota engines, the KYB pany will be here, rather than havtime. We didn’t pursue the distrib- coming in” said Gibb. hydraulics, so they also saw the ing to deal with them overseas.” In its distributorship agreement, utorship. We just maintained.” The parts and service Sunward’s export success start- Pacific Tri-Star will cover Utah. infrastructure also is well Sunward also is active itself, ed in 2004, having sold 6,000 units under way to support to date to the European market. with Jun Wang, the general Sunward customers. Sunward continued to think about manager of Sunward N.A.LLC, “We have some parts on the American market and just this having visited Chicago, Florida, hand here, but the bulk of the past fall, it reached back out to Texas, Canada and the parts are still being shipped,” Pacific Tri-Star and a deal was set Northwest to start seeking dealGibb said. “Right now, the ers. in motion. parts availability is substanSo far, in its territory, Pacific “Even though they are kind of a tial, with the goal being 90 to young company [Sunward was Tri-Star has sold a combination 100 percent parts availability, founded in 1999], they are very of approximately 16 Sunward down the road. As the aggressive and to see their prod- skid steers and mini-excavators. machines are arriving, we are “We are just kind of getting ucts compared to the other factoformulating the popular ries I visited in China, you see the started,” said Gibb. “We sold model numbers and getting workmanship,” said Gibb. “I saw the 3220 skid steer and then we the parts inventoried accordtheir skid steers being built from sold the SWE30U, SWE50, Sunward Equipment Founder He ingly.” the ground up and when they came SWE60, SWE80 mini-excava- Qinghua (L) and Jun Wang, general Pacific Tri-Star has two manager of Sunward N.A.LLC. off their production line, they were tors.” Sunward-dedicated techni-

cians and one service truck, which, Gibb said, is sufficient for what is needed for right now. “I’m impressed with their founder, their managers, their engineering and their desire to accommodate the requests from the American buyer. They listen to us,” Gibb said. About Sunward China Sunward’s core value is “Cultivating virtue with great effort, managing the businesses carefully and benefiting the society,” according to the company’s website. The company manufactures large piling machineries, a full series of excavators, modern rock drilling equipment, industrial vehicles, mining outfits, hoisting machineries, pavement construction machineries, hydraulic components, military machineries, general aviation equipment and yachts. For more information, visit http://en.sunward.com.cn// About Sunward N.A.LLC Sunward N.A.LLC, located in Ogden, Utah, has been owned by Sunward Intelligent Equipment Co. Ltd, and operated by Jun Wang (Joe) since 2015. Its equipment yard is located right off Interstate I15 north of Salt Lake City, Utah, where the company warehouse and spare parts center for full products of Sunward, and the mission of Sunward N.A is to oversee all sales and service, and seek out, and set up new dealers in north America. For more information, call 656188400 or email wangjun@sunward.cc or visit www.sunwardusa.com. About Pacific Tri-Star Pacific Tri Star Inc., located in Ogden, Utah, has been owned and operated by Robert and Kathy Gibb since 1991. Its equipment yard is located right off Interstate I15 north of Salt Lake City, Utah, where the company sells, services and rents a wide variety of new and used construction, agricultural, and mining equipment. For more information, call 888/782-1424 or visit www.pacifictristar.net. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 93

DAY D DA AY A Y ON ONE: CONSTRUCTION TRUCTION EQUIPMENT, HEAV E AV VY Y TRUC T KS, HEAV AVY A VY TRA AILERS, ATT AT TT TA TA AC C CHMENTS NT T S, AND REL LAT ATED D ITEMS DAY AY TWO: FAR FA AR RM EQUIPMENT, T, FAR F AR ARM ATT AT TT TA TA AC CHMEN NTS, VEHICLE ES, AND REL LAT ATED D ITEMS

online

onsite e

2 DAY AY YS S: Augustt 5 & 6 att 10A 10 0AM CDT

MSAL 1255, SCAUC4283, AL 5287, FL AU4483, TX 17188, LA 1756, NC 9730, VA 2907004240, GA AUNR004103, KYRP3843

online

ons site

CONSIGNME ENT NT DEADLINES DEA ES: S:

R lling Stock Ro k, Attt At tta achments s, Implementts s July 30 at 4PM Misc cellane eous Ite ems July 22 2 at 4PM

1--8444-4450--6200 w www ww ww w.Jef .J ffMart ff tinA nAuct cttioneers rss.com .

Page 94 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SON INC KISSIMMEE FL 08/17/2016 ..............................................................93 ALL ERECTION & CRANE RENTAL..........................................................21 ALLU GROUP ............................................................................................76 ASC CONSTRUCTION EQUIPMENT USA ..............................................2,3 ATI CORPORTATION/LEVEL-BEST ..........................................................81 ATTACHMENT COVER ..............................................................................75 BANDIT INDUSTRIES INC ........................................................................65 BARGAINS ................................................................................................84 BRANDYWINE TRUCKS & EQUIPMENT CO ..........................................20 BROOKS SALES INC ................................................................................23 BUTLER MACHINERY ..............................................................................22 CAROLINA CAT ..........................................................................14,15,16,17 CATERPILLAR ..........................................................................................55 CATERPILLAR OF FLORIDA ....................................................................26 CLASSIFIED ..............................................................................................84 CLEARSPAN FABRIC STRUCTURES ......................................................27 CON-EQUIPMENT OF THE CAROLINAS ................................................22 CONSTRUCTION EQUIPMENT GUIDE BACKHOES & ATTACHMENTS PROMO ........................................46 CEG GEO TARGETED EMAIL ........................................................74 CEG SCALE MODELS ....................................................................42 CEG WANTED ..................................................................................85 ONE BUY NATIONAL COVERAGE ..................................................50 DOOSAN INFRACORE AMERICA ............................................................39 DOOSAN PORTABLE POWER..................................................................35 DYNAPAC ..................................................................................................29 EMPLOYMENT OPPORTUNITY REGIONAL SALES MANAGER ........................................................83 FAE USA INC ............................................................................................27 FECON ......................................................................................................52 FELLING TRAILERS ..................................................................................47 FLANGE LOCK ........................................................................................38 FLECO ATTACHMENTS ............................................................................76 FLINT EQUIPMENT COMPANY ................................................................13 G S EQUIPMENT ........................................................................................9 GEHL ..........................................................................................................68 GRINDERCRUSHERSCREEN.COM ........................................................62 GROVE WORLDWIDE (CRANE) ..............................................................34 HILLS MACHINERY COMPANY ................................................................96 HOLLAND PUMP MFG ..............................................................................22 HYDRAULICIRCUIT TECHNOLOGY ........................................................81 INTERNATIONAL IRON ............................................................................25 INTERSTATE EQUIPMENT CO ................................................................23 IROCK CRUSHERS ..................................................................................52 IRONHORSE EQUIPMENT INC ................................................................28 IRONPLANET ............................................................................................87 JEFF MARTIN AUCTIONEERS INC BROOKLYN MS 08/05/2016 ............................................................93 WIN THIS UTV OR 10000 CASH ....................................................90

JOHN DEERE ............................................................................................67 JRE/GEOMETRY GLOBAL ..........................................................................5 KAWASAKI - KCM ................................................................................36,37 KLEEMAN ..................................................................................................59 KOBELCO ..................................................................................................31 KOMATSU AMERICA CORP ..........................................................32,33,69 KPI-JCI ......................................................................................................63 KUBOTA EXCAVATOR ..............................................................................41 LAND EQUIPMENT INC ............................................................................32 LAWRENCE EQUIPMENT ........................................................................95 LINK-BELT EXCAVATORS ....................................................................48,49 MAY HEAVY EQUIPMENT ........................................................................11 MOBRO MARINE INC................................................................................79 MOTLEY’S AUCTION & REALTY GROUP RICHMOND VA 08/02/2016 ..............................................................88 NEXTRAN OF JACKSONVILLE ................................................................45 NORAM ................................................................................................70,71 NORTH AMERICAN ATTACHMENTS........................................................80 PETROWSKY AUCTIONEEERS INC NORTH FRANKLIN CT 08/05-06/2016 ............................................91 POWER EQUIPMENT CO ........................................................................10 POWERSCREEN MID-ATLANTIC ............................................................61 RANSOME EQUIPMENT SALES LLC/LRH ..............................................85 RITCHIE BROS. AUCTIONEERS UNRESERVED PUBLIC AUCTION ..................................................89 ROAD BUILDERS MACHINERY & SUPPLY ............................................78 SANY AMERICA INC..................................................................................30 SCREEN MACHINE INDUSTRIES INC ....................................................53 SENNEBOGEN ..........................................................................................57 SOLESBEES EQUIP & ATTACHMENTS ..................................................81 STOWERS MACHINERY CORP................................................................58 TEREX CRANES........................................................................................73 THE IRONPEDDLERS ..............................................................................20 THOMPSON MACHINERY USED PARTS ................................................76 TOWMASTER INC ....................................................................................45 TRAMAC CORP ........................................................................................28 TRENCH SHORING SERVICES................................................................27 US SHORING & EQUIPMENT CO ............................................................19 VIRNIG ATTACHMENTS ............................................................................77 VOLVO ......................................................................................................6,7 WILCOX TRACTOR SALES INC ..............................................................23 ALABAMA SUPPLEMENT COWIN EQUIPMENT CO INC ....................................................................3 HEAVY MACHINES INC ..............................................................................7 JCB OF ALABAMA ......................................................................................2 THOMPSON TRACTOR CO ....................................................................4,5 TRACTOR & EQUIPMENT CO INC ............................................................8

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 20, 2016 • Page 95

Page 96 • July 20, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CASE 1150M CRAWLER DOZER THE POWER YOU NEED. THE CONTROL YOU WANT. Best-in-class drawbar pull, exclusive SCR technology, maximum visibility, a quieter cab, adjustable operator controls, time-saving servicability features and the premium product support of ProCare make the CASE 1150M the ideal dozer for nearly any job or operator. CaseCE.com/MSeries.

Call Today for a Demo. BLADE WIDTH: 120” | 3048 mm ENGINE POWER: 127 HP | 95 kW

www.hillsmachinery.com

Quality Used Equipment from Hills Machinery

SPECIAL RESIDUAL LEASE PROGRAM ON TEREX | FINLAY SCREENS

SPECIAL FAIR MARKET VALUE LEASE PROGRAM ON BELL ARTICULATED TRUCKS**

2014 B30E’s

2015 B30E’s

As Low As $2,700 Per Month

As Low As $5,200 Per Month

2013 CASE TR320 COMPACT TRACK LOADERS 3 UNITS AVAILABLE W/OROPS, ELECTRIC/HYDRAULIC CONTROLS, BUCKET W/BOE

CT2590, 1015 HRS ........................................$33,020 **Rate based on 1500 hours per year operation with satisfactory credit approval by CT2668, 1070 HRS ........................................$31,830 lessor. Hours shown are subject to change. CT2861, 793 HRS ..........................................$31,740

2014 MODEL 684

2014 MODEL 883

As Low As $3,845 Per Month

As Low As $4,873 Per Month

2015 MODEL 863

2015 MODEL 883

As Low As $3,712 Per Month

As Low As $4,952 Per Month

North Carolina Greenville 415 Belvoir Hwy Greenville, NC 27834 Phone 252-752-7145

PEN!

NOW O

Greensboro 2901 Manufacturers Rd.. Greensboro, NC 27406 Phone 336-308-3045

2015 CASE 1650M CRAWLER DOZER, 2809 HRS, 2012 CASE 621FXT WHEEL LOADER, 2809 HRS, WIDE TRACK, 28” OPEN GROUSERS, PAT BLADE, TOOL CARRIER, CAB, A/C, 3 SPOOL VALVE, NEW CAB, A/C, SWEEPS, TELEMATICS, MAINTENANCE 20.5X25 TIRES, 2.5 CY BUCKET, JRB COUPLER ........ PLAN ................................CALL FOR PRICE OR RENT ........................................................$99,900 OR RENT

PEN!

South Carolina Raleigh 1501 Hedingham Blvd. Raleigh, NC 27604 Phone 919-746-7938

Charlotte 11717 Reames Road Charlotte, NC 28269 Phone 704-208-5564

Columbia 1014 Atlas Way Columbia, SC 29209 Phone 803-658-0200

Charleston 7168B Cross County Road North Charleston, SC 29418 Phone 843-225-9377

NOW O

Greenville 11 Dixie Circle Greenville, SC 29605 Phone 864-546-5208