Published Nationally ®
Southeast Edition $3.00
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
www.constructionequipmentguide.com
July 6, 2016 • Vol. XXIX • No. 14 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
Inside
States Fund $15M Study for Southern Port
Monroe Expressway to Improve U.S. 74…8
By Bruce Smith ASSOCIATED PRESS
CLT photos
Jack Christine, deputy aviation director, described the demolition as another milestone in the airport’s development.
Iron Peddlers Meets Its Customers’ Needs…28
Charlotte Airport Sees Dramatic Transformation In North Carolina, a dramatic transformation of Charlotte Douglas International Airport (CLT) is gradually unfolding, as teams prepare for the next stage of the building process. The recent demolition of the rental car structures has paved the way for construction of the airport’s newest gates, with safety a high priority during the tear down. “The site was fenced separately from the airfield and outside the SIDA area,” said Scott Houser, chief CLT airport construction inspector. “Multiple access gates to the site were kept locked, and the contractor used a single point to access. Contractor personnel where posted at the gate to keep records of trucks entering and leaving the site with recycled materials. This person also kept cell phone parkers from entering the site.” Over the last 20 years, CLT has become one of the busiest airports in
By Cindy Riley
CEG CORRESPONDENT
Moder n Wh eel Loa ders Sol ve Probl ems…62
Table of Contents ............4
CHARLESTON, S.C. (AP) South Carolina and Georgia will spend about $15 million during the next three years on studies for a joint $4.5 billion container ship terminal to be built along the state line. The board of the Jasper Ocean Terminal approved a $5 million budget for the fiscal year beginning in July and was told that the same amount will be needed the following two years. The port agencies from the two states are splitsee PORT page 86
the world, and is currently at or near capacity. Recently completed airfield capacity and terminal capacity enhancement studies examined possible and potential passenger growth forecasts, and formed the airport’s master plan. The plan defines the future and long-term airfield and terminal development, while also shaping CLT’s construction and development through 2035. The new concourse is on the site of the former airport car rental facility, north of Concourse A. The vehicles, fueling stations and offices have been moved to the parking deck and a new satellite facility on Wilkinson Boulevard. The concourse is one part of Destination CLT, a $2.5 billion plan that will guide airport expansion into the 2020s. CLT has seen its traffic grow see AIRPORT page 88
Paving Section ..........43-53
Construction Employment Rises in 39 States
Wheel Loaders, Tool Carriers & Attachments Thirty-nine states added con- construction employment levels lack of workers than it does a lack number of new construction jobs Section ......................57-84 struction jobs between May 2015 declined in most states as many of work,” said Ken Simonson, for the past 12 months include and May 2016 while construction
firms appear to be running out of
chief economist of the association.
Florida (29,400 jobs, 6.9 percent),
states between April and May, according to analysis of Labor Department data released June 17 by the Associated General Contractors of America. Association officials said monthly
shortages. “With construction demand remaining high and construction unemployment getting lower, the slowdown in monthly hiring probably has a lot more to do with a
appears robust and as long as most firms can find qualified workers.” California added the most construction jobs (39,600 jobs, 5.5 percent) between May 2015 and May 2016. Other states adding a high
and New York (11,000 jobs, 3.0 percent). Hawaii added the highest percentage of new construction jobs during the past year (19.7 percent, 6,700 jobs), followed by Iowa
Auction Section ......96-105 employment only increased in 19 workers to hire amid growing labor “Overall the construction market Georgia (13,400 jobs, 8.1 percent) Business Calendar ......100 Advertisers Index ........106
see JOBS page 92
Page 2 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GEORGIA Buford 678.318.9500 Saavannah 912.964.8079
SOUTH CA AROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060
NORTH CAR CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710
TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845
NORTH DAK DAK KOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020
Fuel efficiency is the number one thing I look for during a demo. Burning one-third less fuel than the competition —
That’s our Ex Factor. – Stoney Welch, director of HSE, Triple B Services
Williston 701.570.5309
Becoming one of the most successful site prep, excavation, and paving contractors in the state of Texas requires a keen eye on the financials. There’s a reason Stoney has decided to cycle 11 new Volv l o excavators into his fleet over the last two years — they burn a lot less fuel, the financing is predictable and flexible, and they hold their value incredibly well. volvoce.com/ExFactor. Find tips to get the most from your excavator at volvoce.com/ExFactor
ascvolvo.com
Smartt W Smar Works. orks.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 3
GEORGIA Buford 678.318.9500 Savannah 912.964.8079
SOUTH CAROLINA Nor th Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060
You’re serious about getting your bonus. And your crew thanks you.
Our line of pavers and compactors sets the standard for reliable asphalt paving. We have a long h i s to r y o f p r o v e n te c h n o l o g y a n d a r e p u t a t i o n f o r i n d u s t r y - l e a d i n g i n n o v a t i o n . W h e n i t c o m e s to ma ximizing your earnings, these machines deliver.
NORTH CAROLINA A sheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710
Track DENSITY IN REAL TIME. PASS:
4
TEMPERATURE:
250°
D E N S I T Y:
PA S S :
5
TE M P E RATURE :
220°
DENS I T Y:
95.1%
94.2%
TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845
PASS:
2
TEMP ER AT U R E:
270°
DE NSI T Y:
92.6%
Volvo Intelligent Compaction (IC) with Densit y Direct . Volvo has changed the game. Density Direct provides actual density calculations in real time — eliminating guesswork and reducing core sampling. Improve mat quality, do it in less time, get your bonus, and win more contracts with V Vo olvo Density Direct. Learn more at volvoce.com/DensityDirect.
ascvolvo.com
Page 4 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
sOuTheAsT edITIOn
In ThIs Issue
®
Circulated Throughout
Founder, Publisher & CEO Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office
8
28
62
To r e a d t he s e s t o ri e s a nd ma ny m o re , v is it w w w . co n s t r u ct io ne q uipm e nt g uid e . co m
specIAl secTIOn 57 WHEEL LOADERS Be sure to check out this special section! Keep up to date with the latest information on wheel loaders.
62 MODERN WHEEL LOADERS HELP SOLVE AGE-OLD PROBLEM The age-old problem of moving large quantities of material from one place to another had plagued those in the construction industry for centuries.
Toll Free Fax Web site Editorial e-mail Advertising e-mail
8
MONROE EXPRESSWAY TO IMPROVE CAPACITY OF U.S. 74 CORRIDOR
An expressway extending nearly 20 mi. (32 km) is one of the current projects being undertaken by the North Carolina Department of Transportation (NCDOT).
102 EURO AUCTIONS USA HOSTS ANOTHER
22 ARTBA HONORS ANDERSON FOR
Euro Auctions USA held another successful auction at its permanent facility in the Atlanta suburbs of Newnan, Ga., on June 21.
HIS CONTRIBUTIONS
24 ELFA PRESIDENT BLAMES UNCERTAINTY
104 PROXIBID, JOHN DEERE DEALERS
FOR MIXED REPORT The Equipment Leasing and Finance Association’s (ELFA) Monthly Leasing and Finance Index (MLFI-25), which reports economic activity from 25 companies representing a cross section of the $1 trillion equipment finance sector, showed its overall new business volume for April was $7.3 billion, down 12 percent from new business volume in April 2015.
Contact
26 PIRTEK ROCKVILLE EARNS HONORS AS TOP FRANCHISE PIRTEK Rockville in Rockville, Md., has earned top honors as the PIRTEK USA’s National Franchise of the Year for 2015.
28 BRIAN MCCARTY PASSES AWAY Brian David McCarty died June 5. He was 44.
28 IRON PEDDLERS MEETS ITS CUSTOMERS’ NEEDS, RETURNS TO ATLANTA When Iron Peddlers moved out of its branch in Atlanta, Ga., the company’s customers noticed. The company, headquartered in Monroe, N.C., specializes in selling used parts and rebuilt components for heavy equipment. The company also sells, leases and rents all types of construction equipment.
Toll Free Fax e-mail Contact
Toll Free Fax e-mail Contact
105 PURPLE WAVE ANNOUNCES SITE ENHANCEMENTS The new interface offers a guided search with robust technology delivering instant results, with item counts, so users can quickly and easily find what they are looking for, according to the company.
equIpmenT
www.constructionequipmentguide.com
editorial@cegltd.com production@cegltd.com
Toll Free Fax e-mail
TEAM UP TO SYNDICATE SALE ITEMS Proxibid and John Deere announced an agreement that allows John Deere dealers to quickly and easily syndicate equipment for sale to the Proxibid and eBay Marketplaces.
215/885-2900 800/523-2200 215/885-2910
Kent Hogeboom National Sales Manager 315/866-1423 800/988-1203 315/866-1379 khogeboom@cegltd.com
SUCCESSFUL AUCTION
For nearly 30 years, members of the American Road & Transportation Builders Association’s (ARTBA) Traffic Safety Industry Division (TSID) have honored public and private sector professionals with the prestigious “Jake Landen Highway Safety Award.”
470 Maryland Drive Fort Washington, PA 19034
Toll Free Fax e-mail
ATLANTA, GA. More than 2,200 bidders participated online and in person at Ritchie Bros.’ multi-million dollar unreserved public equipment auction in Atlanta, Ga., on June 21.
Edwin M. McKeon Sr. Richard C. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
Richard C. McKeon •North & South Carolina•Tennessee •Virginia 704/553-8888 800/288-4234 704/553-8899 rmckeon@cegltd.com
For advertising rates Contact
98 RITCHIE BROS. HOLDS UNRESERVED AUCTION IN
feATures
•Alabama •Arkansas •Florida •Georgia •Louisiana •Mississippi •North Carolina •South Carolina •Tennessee •Virginia •Puerto Rico •Virgin Islands
Toll Free Fax e-mail
Mobile
Rich Olivier •Alabama •Arkansas •Georgia •Mississippi •Tennessee •Florida Panhandle 770/443-3174 800/409-1479 770/443-3176 rolivier@cegltd.com Jim Van Natta •Florida •Virgin Islands •Puerto Rico 407/365-5720 800/344-3026 407/366-3192 jvannatta@cegltd.com Dale Agnew •Louisiana 877/877-4997 972/719-2611 dagnew@cegltd.com
YouTube
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
43 ATLAS COPCO Dynapac F1200C Compact Tracked Paver
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
50 CHICAGO PNEUMATIC MV 58A Compactor
Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
50 ROADTEC SB-2500e Shuttle Buggy MTV
depArTmenTs 94 CLASSIFIEDS 96 COMING AUCTIONS 100 BUSINESS CALENDAR
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 5
JAMES RIVER EQUIPMENT
WORKSITE PERFORMANCE
PROTECTION AND ABILITY
I
35 locations serving North Carolina, South Carolina and Virginia!
m Jam esRiv erEquip ment.co
Page 6 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact your local dealer: ASC Construction Equipment USA A, Inc.
Flagler Construction Equipment, LLC
Augusta, GA 706.793.4726
Davie, FL 954.581.4744
Buford, GA 678.318.9500
Ft. Myers, FL 239.481.8554
Forest Park, a GA 770.319.0074
Jacksonville, FL 904.737.6000
Savannah, GA 912.964.8079
Lake City, FL 386.758.7444
Charlotte, NC 704.494.8100
Miami, FL 305.477.2442
Charlotte, NC 704.596.8283
Orlando, FL 407.850.9614
Garner, NC 919.661.8710
Orlando, FL 407.659.8700
Greenville, NC 252.754.5280
Tampa, FL 813.630.0077
Mills River, NC 828.687.0620 Bismarck, ND 701.250.4882 Fargo, ND 701.271.2360 Minot, ND 701.839.4020 Cayce, SC 803.791.0740 N. Charleston, SC 843.414.1120 Piedmont, SC 864.704.1060 Chattanooga, TN 423.308.7940 Knoxville, TN 865.525.1845
Scott Equipment Companyy, LLC Alexandria, L A 318.448.1647 Baton Rouge, L A 225.293.3683 Broussard, L A 337.837.2907 Lake Charles, L A 337.433.9811 Monroe, L A 318.388.9300 Shreveport, L A 318.226.9171 St. Rose, L A 504.461.0961 Jackson, MS 601.373.4600
Cowin Equipment Company Inc.
Lavergne, TN 615.793.3888
Birmingham, AL 205.841.6666
Memphis, TN 901.547.8008
Madison, AL 256.350.0006 Mobile, AL 251.633.4020 Montgomery, AL 334.262.6642 Oxford, AL 256.832.5053 Pensacola, FL 850.479.3004
Our Volvo E-Series excavator has allowed us to do things that are just plain amazing.
That’s our Ex Factor. – Jim Whitaker, fleet manager, Whitaker Construction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 7
Whitaker Construction has more than 60 years’ experience in underground construction. As one of the largest utility contractors in their region, region, they ha av ave to operate with a cutting edge. Jim says the EC380E gives them that edge — working up to a 480 class size, while fitting in tighter spaces — allowing them to tackle ckle challenging jobs with more efficiency. Find tips to get the most from your exca avvator at vvolvoce.com/ExFactor olvoce.com/ExFactor.
Page 8 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Monroe Expressway to Improve Capacity of U.S. 74 Corridor By Brenda Ruggiero CEG CorrEspondEnt
An expressway extending nearly 20 mi. (32 km) is one of the current projects being undertaken by the north Carolina department of transportation (nCdot). the road extends from U.s. 74 near I-485 in Mecklenburg County to U.s. 74 between the towns of Wingate and Marshville in Union County. the Monroe Expressway will reportedly improve mobility and capacity in the U.s 74 corridor by allowing for high-speed regional travel while maintaining access to properties along existing U.s. 74. once complete, the Monroe Expressway will be operated by the north Carolina turnpike Authority. Construction is currently on schedule. It started in May 2015, and the project is scheduled to open to traffic in late 2018. the full dollar amount is $731 million, with the contract awarded to Monroe Bypass Constructors LLC. When complete, the road will be north Carolina’s second toll road, with the first being the triangle Expressway in raleigh. It will be the first operational toll road in the Charlotte area, and will eventually be part of a network of express lanes in the greater Charlotte area. “nCdot continues to work with local municipalities, elected officials and the public to help educate them on the scope of the project and how it will improve mobility through the region,” said Jordan-Ashley An expressway extending nearly 20 mi. (32 km) is one of the current projects being Baker, communications offiundertaken by the North Carolina Department of Transportation (NCDOT). cer of nCdot. “As with any new project, there are Mason for reinforcing steel; HrI for grad- are 75 to 150 ton (68 to 136 t) Link-Belt understandably logistical ing, drainage, and bridge work; Lee & sims and American Cranes, and ICE and delmag questions about project operfor drilled shafts; Mountain Creek pile hammers. ations and execution that we Contractors for box culverts; nicky In early June, the Fourth Circuit Court of are happy to help answer.” Construction for jack and bore pipe; penhall Appeals ruled in favor of the nCdot and Major subcontractors Co. for concrete grooving; psI for traffic against several environmental groups, which include A-1 pavement control devices; rCI demolition for build- reaffirmed a district court’s ruling that conMarking for pavement ing demolition; seal Bros. for erosion and struction on the expressway could continue markings; AH Beck for sediment control; southern Concrete as planned. A three-judge panel upheld a drilled shafts; Amec for Construction for concrete barrier wall; state sept. 2015 decision that the environmental geotechnical services; Utility for wet utilities; stay Alert for traffic study is both valid and lawful. Blount sandford for concontrol; rK & K, lead engineer; t & H “I want to thank the Fourth Circuit Court crete barrier wall; Border Electrical, AEt, Its, signals, and signs; tJC of Appeals for this decision today,” said rebar for reinforcing steel; painting for aesthetic painting; tricolor nick tennyson, n.C. transportation BpI-BMI for paving and Construction is currently on schedule. It started in May Construction for MsE Walls; Vecellio & base; Bullington for fence 2015, and the project is scheduled to open to traffic in Grogan for grading and drainage; Watts secretary. “nCdot is eager to move and guardrail; Callis late 2018. Barrier Walls for bridge barrier wall; and beyond litigation and moving forward, focus its efforts on delivering this much-needed Construction for toll buildWEs BEn for clearing and grubbing. ings; Carolina Enviro for erosion and sedi- dellinger Construction for bridge work; According to nCdot, equipment used project to the people of north Carolina.” (This story also can be found on ment control; Catoe Well drilling for envi- diversified Engineering for quality control; on the job is reportedly mostly Caterpillar, ronmental; Cherry Contracting for sound and East Coast drilling for blasting. and includes various dozers, scrapers, articu- Construction Equipment Guide’s website at Also, Es Wagner for grading and lating trucks, quarry trucks, excavators, www.constructionequipmentguide.com.) walls; Curtin trucking for roadway shoulder drains; dane Construction for bridge work; drainage; GML for vegetation; Hiatt & compactors, and motorgraders. there also CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 9
Effectively simple • Efficient—Large hoppers collect more debris to reduce downtime for offloading • Durable—Exclusive 3 shaft elevator eases chain wear and removal of chain links by up to 50% • Productive—Large 42" gutter brooms are spring balanced and apply the right amount of pressure on any surface
Call the location nearest you today! When you need us, where you need us Tampa
Tallahassee
Jacksonville
Orlando
Fort Myers
Pompano Beach
Equipment • Parts • Service
www.gsequipment.com
Page 10 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
OFF YOUR OFF YOUR IDEAS S IFT IDEAS IFT
L L
GROUND GROUND D
THE THE
Step into 2016 right with these great deals!
Celebrates DJI 10TH ANNIVERSAR ANNIVERSARY Y SPECIALS P hantom 3’ ’ss S Phantom 3’s Starting tarting a att just $499!
DJI is C Celebrating elebrating their 10th A Anniversary nniversary prices Phantoms we’ve e’ve nev never er seen! with h pr ice es on P h toms han ms like w
DJI DJ JI Phan P Phantom hanto han tom m3
TOPCON
ADVANCED ADV DV VANCED VANCED ANCED D
RL RL-H4C -H4C A Alkaline lkaline P Package, ackage, 13’’ FFiberglass iberglass Gr Grade ade R Rod, od, A Aluminum luminum T ripod and free free B Tripod Benchmark enchmark Ha Hat! t!
TOPCON
TTP-L5B P-L5B
Was $999.00 99.00 Anniversary sary P Price rice $7 $799.00
PACKAGE P PAC ACKAG AC AGE Only $775.00 5 00
Pipe Laser The industry standard for pipe lasers!
C Call all ffor or Special P Pricing! ricing!
DJI D DJ JI Phanto Ph Phantom P hanto ha om m3
SSTANDARD ST TTAND A AN AND NDA DARD A Wa Wass $799.00 A Anniversary nniversary P Price rice $4 $499.00 499 4
Field Supplies & Accessories Accessories
rr y rr We also ca paint, paint, tripods, tripods, prism prism poles poles,, flags & flagging, flagging, grade grade rods rods & more! more!
D Don’t on’t miss yyour our chanc chance e tto o buy the w world’s orld’s most popular dr drone one aatt these g great reat pr prices! ices!
We carry everything W e car ry ev erything yyou ou need on the job! sure whatt yyou Not sur e wha ou need? Our friendly here O ur fr iendly & ccourteous ourteous staff is her e give tto o help yyou! ou! Just g ive us a call!
866.342.7665
Go Unma
w w w.benchmarksupply.com M Make ake yyour our mar markk with B Benchmark! enchmark!
866.342.7665
AAuthorized uthorized DDealer ealer *All Offers Limited Time Offe er. Valid While Supplies Last.
ool & Supplyy nned is a Division of Benchmark TTo , Inc.
w w w.gounmanned.com
Liftt yyour Lif our ideas off the g ground! round!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 11
FLORIDA Davie 5210 Reese Rd. Davie, FL 33314 P: 954.581.4744
Ft. Myers 5151 Dr. Mar tin Luther King, Jr. Blvd. F t . M ye r s , F L 3 3 9 0 5 P: 239.481.8554
Jacksonville 8750 Philips Hw y. Jacksonville, FL 32207 P: 904.737.6000
Lake City 5 3 9 S W A r r ow h e a d T Te err. L ake Cit y, FL 32024 P: 3 86.758.7444
Miami (E xpor t s Par t s Facilit y) 6144 NW 74th Ave. Miami, FL 33166-3710 P: 305.477.2442
Orlando 9601 Boggy Creek Rd. Orlando, FL 32824-8728 P: 407.850.9614
Tampa 8418 Palm River Rd. Taampa, FL 33619 P: 813.630.0077
Some companies have you choose power or fuel efficiency. You chose both.
Volvo developed the industr y’s first fuel efficiency guarantee so you never have to compromise on per formance or productivity. And with CareTrack machine monitoring, you can focus your attention on more impor tant things — like growing your business. Get the details aatt volvoce.com/smartfuel.
flaglerce.com
Page 12 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
#"/$)"3% 64& % & 26* 1.& /5
#"/$)"3% › ŗš
#M B O D I B S E .B D I J O F S Z D P N 6T F E
New & Pre-Owned Cranes, Boom Trucks and More! V View iew our used in inventory ventory aat: t:
FLORIDA GEORGIA Tampa/Orlando Miami (Int’l Sales) Union City St. Augustine Pompano Beach Tampa/Orlando 407.855.6195 305.477.8717 770.774.7300 904.737.7730 954.971.9440
RingPowerCrane.com R ingPowerCrane.com NORTH CAROLINA Concord 704.795.3636
WA AL NTE LB D 9 RAN : U
WE PE PERFORM ANNU UA A L CR C R A N E INSPEC TIONS! NEW & U US TA P ART S t SER SERVIC S E D SA L E S t R E N T A L S t PARTS VIC E
0 D S 90 4-49 S CO ED 4-4 4- N C 94 141 SID RA -14 8 o ER N 15 r ED ES
used. used.RingPower.com/Crane used R RingPower ingPower.com/C Crane rane
SOUTH CAROLINA Ladson 843.818.1954
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 13
May Heavy Equipment Get More Done
866-629-3784 Columbia, SC, Charleston, SC, Lexington, NC, Raleigh, NC
At May Heavy Equipment, we’ re devoted to helping you get more done. By providing the tools needed for construction, mining and more since 1997, we’ ve grown to become the Southeast’ s reliable source for heavy equipment rentals, sales, parts and service.
866-629-3784 Columbia, SC, Charleston, SC, Lexington, NC
Page 14 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248 SALES • SERVICE • PARTS • RENTALS
When your reputation rests on a single line, you make sure your machines are best-in-class. Period. That’s the focus behind Kawasaki-KCM Z7 Generation Wheel Loaders and Link-Belt® X4 Excavators. Both lines share a laser-sharp dedication to quality, innovation and performance…and deliver daily on that promise at job sites all around the US and Canada.
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA Chesapeake, VA 866-955-6071 800-342-3248
SALES SERVICE PARTS RENTALS
([SHFW ÀH[LEOH ZDUUDQW\ SURJUDPV RSHUDWRU WUDLQLQJ DQG 24/7 telematics tracking & monitoring, backed by exceptional service and parts support from your dealer. They’re built to be the best…so you can be the best on the job. Check out this performance pair at your local dealer.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 15
We Are
The ALL Family of Companies boasts new yards and a constantly updated fleet. But folks don’t choose ALL for what’s new. They choose us for what is the same. Our success is the experience and the work ethic our team brings to every job. This is what makes us unique. It’s what makes us ALL.
800-232-4100 www.allcrane.com
C R A N E R E N TA L
|
SALES
ALL
|
SERVICE
|
PA R T S
Page 16 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
RECEIVE 10%
OFF
your next purc hase of parts * Promotion code
: Parts 4-13
Over 60 Years of Experience Sales
Rentals
Parts
Service
786-507-4543
NEW JACKSONVILLE, FLORIDA
With Multiple Locations in Florida
!
• Over 40 Hyundai models to choose from
• Industry-best warranty
• Complete product support and service
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 17
Mobro Marine Meeting your Marine Needs Since 1962
SPECIAL SALE: Kobelco CK850G
150 ft boom, 2 drums, free fall both drums, block and ball
Call Neil Corrado 904.571.9270 606 S. R. 16 East, Green Cove Springs, FL 32043
904-284-9670 Fax: 904-358-8706 Call Neil Corrado: 888-370-9336 or 904-284-9670 • Cell: 904-571-9270 • Email: ncorrado@mobromarine.com
www.mobromarine.com
MOBRO MARINE, INC.
Page 18 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2010 KOMATSU PC350 LC HYD EXCAVATOR, ID# UT14985, 10231 HRS, CAB, AUX HYDRAULICS, BUCKET, UC @ 10231HRS: 28IN TG SHOES 85%, LINKS 85%, BUSHINGS 85%, IDLERS 80%, SEGMENTS 85%, ROLLERS 65-75%......................................................$95,000
2007 CAT 312CL HYDRAULIC EXCAVATOR, ID# UT14090, CAB, AIR CONDITIONING, RADIO, PATTERN CHANGER, UC @ 12033HRS, 24IN TG SHOES 77-81%, BUSHINGS 18-21% NOT TURNED, LINKS 51%, INTERNAL TRACKS 15%, SEGMENTS 75%, IDLERS 76% ....$60,000 NE
W
RE PR DU ICE CE D
RE PR DU ICE CE D
RE PR DU ICE CE D
2015 CAT 313FL HYDRAULIC EXCAVATOR, ID# UP15222, 8 HRS, AB, A/C, REAR VIEW CAMERA, HYDRAULIC COUPLER, BUCKET, COUNTERWEIGHT, 28” TG SHOES, UC 99% REMAINING............................................$128,000
2004 CAT 314C LCR HYDRAULIC EXCAVATOR, ID# UT13117, AUXILIARY HYDRAULICS, CAB, AIR CONDITIONING, HYD QUICK COUPLER, UC @ 8509HRS, 24IN TRIPLE GROUSER SHOES 63%, IDLERS 80%, ROLLERS 70%, CARRIER ROLLERS 82%, BUSHINGS 70% NOT TURNED, 8509 HRS ................................$87,000
RE PR DU ICE CE D
LIS
TIN
G
2013 CAT 966K WHEEL LOADER, ID# UP14096, 3093 HRS, TIER IV C9.3 ENGINE, EROPS, AIR CONDITIONING, RADIO, STICK STEERING, RETARDER, GP BUCKET, TIRES 68% REM ........ ................................................................$275,000
2011 CAT 825H COMPACTOR, ID# UP14840, 5061 hrs, EROPS, AIR CONDITIONING, STRAIGHT DOZER BLADE, FAST FUEL, FAST OIL, PRODUCT LINK ............................$385,000
2013 CAT 303.5ECR MINI HYD EXCAVATOR, ID# UT14330, CAB, AIR CONDITIONING, PATTERN CHANGER, SWING BOOM, AUX HYDRAULICS, MANUAL QUICK COUPLER, BUCKET, PLUMBED FOR HAMMER USE, 12IN RUBBER SHOES, ROLLERS 90% REM @ 730HRS, 734 HRS................................$43,000
2011 CAT D6T XL TRACK-TYPE TRACTOR, ID# UT14906, 7512 HRS, EROPS, AIR CONDITIONING, DIFF STEERING, ARO READY SU BLADE, SINGLE TILT, MS RIPPER W/ 3 SHANKS, RIPPER CONTROL, STANDARD UC @ 7511HRS:, 24IN SHOES 25% REM ......$155,000 NE
W
2013 CAT 980K WHEEL LOADER, ID# UP14226, 3752 HRS, EROPS, AIR CONDITIONING, COMMAND STEERING, RIDE CONTROL, COLD WEATHER START, GP BUCKET, FAST FILL FUEL SYSTEM, MICHELIN TIRES ........$345,000
2006 CAT 950H WHEEL LOADER, ID# UP15005, 11569 HRS, TIER III C7 ENGINE, EROPS, AIR CONDITIONING, RETARDER, 3-VALVE RIDE CONTROL, HYD HORIZ PIN QUICK COUPLER, GP BUCKET, 23.5R25 TIRES @ 11569HRS:, RF 37%, LF 70%, RR 35%, LR 39%............$121,000
2012 CAT D8T TRACK-TYPE TRACTOR, ID# UT14398, EROPS, AIR CONDITIONING, DIFF STEERING, SINGLE TILT, SS RIPPER, STANDARD SALT UC @ 8566HRS, 24IN SHOES 65%, LINKS 76%, SEGMENTS 50%, IDLERS 84%, BUSHINGS 60% NOT TURNED, ROLLERS 91%, 8607 HRS......................................$370,000
2005 CAT D10T TRACK TYPE TRACTOR, ID# UP12550, 19567 HRS, EROPS, AC, FINGER TIP STEERING, SS RIPPER, UC @ 19567HRS: 28IN SHOES 85%, LINKS 80%, ROLLERS 99%, CARRIERS WORN OUT, ENGINE RECONDITIONED 14,216 HR, TRANSMISSION /TORQUE /FINAL 11,949, UC REPLACED @ 18294HRS ..$740,000
LIS
TIN
G
2014 CAT 908H WHEEL LOADER, ID# UT14929, 600 HRS, TIER IV C3.3B ENGINE, EROPS, AIR CONDITIONING, WHEEL STEERING, AUXILIARY HYDRAULICS, ELECTRICAL CONNECTION, GP BUCKET, FIRESTONE TIRES 90% REM @ 589HRS ......................................$90,000
2008 CAT 963D TRACK-TYPE LOADER, ID# UP14095, 8431 HRS, TIER III C6.6 ENGINE, EROPS, AIR CONDITIONING, GP BUCKET, V-LEVER TRANS CONTROL, TWO LEVER BUCKET CONTROL ..............................$129,000
NE
RE PR DU ICE CE D
RE PR DU ICE CE D
2012 VOLVO A40F ARTICULATED TRUCK, ID# UT14568, 3570 HRS CAB, AIR CONDITIONING, 6X6, ENGINE BRAKE, TAILGATE, YOKOHAMA TIRES @ 3474HRS, RF 80%, LF 82%, RR 83%, RR2 82%, LR 83%, LR2 83% ................$330,000
CAT CB214E ASPHALT COMPACTOR, ID# UT15242, 491 hrs, 39IN VIBRATORY DRUMS, SPRAY SYSTEM ......................................$23,000
2005 CAT 735 ARTICULATED WATER WAGON, ID# UP13431, TIER II 3406 ENGINE, CAB, AIR CONDITIONING, 6X6, TIRES @ 9307HRS: RF 59%, LF 34%, RR1 14%, RR2 28%, LR1 14%, LR2 28%, 7000GAL CURRY WATER TANK, 9307 HRS ........................................................$255,000
2000 CAT 777D OFF-HIGHWAY TRUCK, ID# UT12614, 20605 HRS, CAB, A/C, PMS, 4X6, RETARDER, TRACTION AID, DUAL SLOPE HEATED DUMP BODY, TIRES @ 19455HRS AVG 4570%, WET FRONT BRAKES, EXCHANGE TRANSMISSION 8/29/2011, NEW STD ROD AND MAIN BEARING, ROLLED IN @ 14736HRS ......$560,000
W
LIS
TIN
G
2013 CAT 259B COMPACT TRACK LOADER, ID# UT14482, 1124 HRS, CAB, AIR CONDITIONING, ELEC CONTROL FOR IMPLEMENTS, 2SPEED TRAVEL, LOW FLOW HYDRAULICS, MANUAL QUICK COUPLER, BUCKET, 16IN WIDE TRACKS ........................................$45,000
2015 CAT 272D SKID STEER LOADER, ID# UP15315, 185 hrs, CAB, AIR CONDITIONING, 2SPEED TRAVEL, STANDARD FLOW HYD, PROPORTIONAL HYD, COLD WEATHER PKG, ELECTRIC COUPLER, BUCKET ............$49,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 19
USED PARTS
CATERPILLAR 980C Arm Used 9V6026/3062 CATERPILLAR D6T XW Arm Used 3341767/66973 CATERPILLAR 980G,980G II,980H Arm Rebuilt 1756352/67169 CATERPILLAR 988F I,988F II Arm Used 4E7522/63854 CATERPILLAR 930G Arm Used 2357301/67960 CATERPILLAR 980H Axle Rebuilt 2327558/34667 CATERPILLAR 980G Axle Used 1080060/68119 CATERPILLAR 950G,962G,IT62G Axle Used 1383121/35700 CATERPILLAR D6T XL Blade, Angle Used 3527618/66974 CATERPILLAR D6T XL Blade, Angle Used 3527618/66974 CATERPILLAR D4K XL Blade, Angle Used 2551397/66645 CATERPILLAR D6N Blade, Angle Used 3593410 CATERPILLAR D6N LGP Blade, Angle Used 2236304/38985 CATERPILLAR D4K XL Blade, Angle Used 2551397/66645 CATERPILLAR 257,257B,257B2,257B3,257D Blade, Angle Used 2315275/61395 CATERPILLAR D6T XW Blade, Angle Used 3341764/58556 CATERPILLAR CS-573E Blade, Other New 2238997/65870 CATERPILLAR 314 Blade, Other Used 3387943/51608 CATERPILLAR D8R,D8T Blade, Other Used 2627670/54790 CATERPILLAR D6K Blade, Other Used 2401521/59967 CATERPILLAR 314D LCR Blade, Other Used 2824578/62303 CATERPILLAR D6H,D6H II Blade, S Used 6Y0834/61446 CATERPILLAR D8R,D8T Blade, SU Used 2394170/68135 CATERPILLAR D8R,D8T Blade, SU Used 9U8088/68133 CATERPILLAR D11N Blade, U Rebuilt 9W1993/47321 CATERPILLAR D9L Blade, U Rebuilt 9J7420/42578 CATERPILLAR 311,312 Booms Used 5I3412/54544 CATERPILLAR 305.5,305.5D CR Bucket, Ditch Cleaning Used 700068060/60885 CATERPILLAR 416C,416D,416E,420C,420D,420E,426C Bucket, GP New 1345869/30959 CATERPILLAR 325D Bucket, GP Used 2692657/65113 CATERPILLAR 325D Bucket, GP Used 2692657/65114 CATERPILLAR 325D Bucket, GP Used 2692659.65109 CATERPILLAR 325D Bucket, GP Used 2692645/65110 CATERPILLAR 325D Bucket, GP Used 2692645/65112 CATERPILLAR 930H,930G Bucket, GP New 3483461/63008 CATERPILLAR 365B Bucket, GP Used 1754487/49221 CATERPILLAR 420F Bucket, GP Used 3377388/51594 CATERPILLAR 216,216B,216B2,216B3,226,226B,226B2,226B3,228,232,232 B,232B2,232B3,236,236B,236B2,236B3,236D,242,242B,242 B2,242B3,242D,246,246B,246C,246D,247,247B,247B2,247B 3,248,248B,252,252B,252B2,252B3,256,256C,257,257B,257 B2,257B3,257D,259D,259B,259B3,262,262B Bucket, Other New THSB/56740 CATERPILLAR 992C,992D Bucket, Rock Used 5V5601/60577 CATERPILLAR 988B,988F Bucket, Rock Used 9V0219/60984 CATERPILLAR 988G Cab, EROPS New 1289664/29291 CATERPILLAR D10 Cab, EROPS Used 3T8106/36149 CATERPILLAR 992C,992D,690B Cab, EROPS Used 9V5306/30599 CATERPILLAR 980G Cab, EROPS Used 1097922/47687 CATERPILLAR 992C,992D Cab, EROPS Used 2V5075/46948 CATERPILLAR D9R,D10R,D11R Cab, EROPS Used 1118549/50331 CATERPILLAR D350E Cab, EROPS Used 7U4400/40232 CATERPILLAR 988H Cab, EROPS Used 2273190/69750 CATERPILLAR D6R,D6T,D7R,D8R Cab, EROPS Used 1587694/70507
THE BEST VALUE AND BEST SELECTION OF CAT® PARTS & COMPONENTS
CLEVELAND BROTHERS PROVIDES ALL YOUR USED PARTS AND EQUIPMENT NEEDS
CATERPILLAR 990,990 II,992G Cab, EROPS Used 1237231/70506 CATERPILLAR D9N,D10N,D11N Cab, EROPS Used 8E1085/48556 CATERPILLAR 988G,988H Cab, EROPS Used 1289664/64326 CATERPILLAR 980G Cab, EROPS Used 1097922/65276 CATERPILLAR 972M Counterweight New 3672334/68204 CATERPILLAR 980G Counterweight Used 1108117/65814 CATERPILLAR 980G Counterweight Used 1146030/65810 CATERPILLAR 980H Counterweight Used 2343096/66152 CATERPILLAR 314D LCR Counterweight Used 3374888/62291 CATERPILLAR D10R Counterweight Used 6T3584/62617 CATERPILLAR 972M Counterweight New 3672334 CATERPILLAR 930G,930H Coupler / Quick Coupler Used 2357401/67582 CATERPILLAR 416D,416E,416F,420D,420E,420F,422E,422F,424D,428D,428 E,428F,430D,430E,430F Coupler / Quick Coupler Used 3611100/66394 CATERPILLAR IT62H Coupler / Quick Coupler Used 3109397/68189 CATERPILLAR 938H Coupler / Quick Coupler Used 3109392/68190 CATERPILLAR 329D Coupler / Quick Coupler Used 2924162/57845 CATERPILLAR 924K Coupler / Quick Coupler Used CATERPILLAR 824C Differential Used 4V1073/31078 CATERPILLAR 824C Differential Used 3V4030/31079 CATERPILLAR 980K Differential Used 3880375/58737 CATERPILLAR 740 Differential Used 1540300/37138 CATERPILLAR 836C Differential Rebuilt 1367631/55993 CATERPILLAR 988H Differential Rebuilt 1378851/56074 CATERPILLAR 992C,992D Differential Used 6W7420/59790 CATERPILLAR 980K Differential New 3880373/58489 CATERPILLAR D350E Engine Used 1274527/39865 CATERPILLAR 962G Engine Rebuilt 1168671/34551 CATERPILLAR 769D Engine Rebuilt 1230206/32272 CATERPILLAR 988G Engine Used 1986489/65865 CATERPILLAR D8R II Engine Rebuilt 1577195/66135 CATERPILLAR 314D LCR Engine Used 3244030/65071 CATERPILLAR 330D,330DL Engine Rebuilt 2401861/68290 CATERPILLAR 826H Engine Used 2258923/61095 CATERPILLAR 836C Engine Used 1438336/62237 CATERPILLAR D10N Engine Rebuilt 1056574/55963 CATERPILLAR D11R Engine Used 1008111/62564 CATERPILLAR 345B Engine Used 1422005/69833 CATERPILLAR 992C,992D Engine Rebuilt 1301248/63895 CATERPILLAR D6H,D6H II Engine Rebuilt 7C0501/65537 CATERPILLAR 773D Engine Used 1230198/65632 CATERPILLAR 777C Engine Rebuilt 7E9078/36720 CATERPILLAR 980H Engine Rebuilt 2250992/55693 CATERPILLAR 988F II Engine Used 1430029/63717 CATERPILLAR 637E Engine Used 1W3782/69562 CATERPILLAR 60 KW Engine Used 3147449 CATERPILLAR 345B Engine Used 1382001/37356 CATERPILLAR D11N Equalizer Bars Rebuilt 2072683 CATERPILLAR D11R Equalizer Bars Rebuilt 2072684 CATERPILLAR D7H Equalizer Bars Rebuilt 1414690/28344 CATERPILLAR D6H Equalizer Bars Rebuilt 3W5979/65532 CATERPILLAR D9T Equalizer Bars Rebuilt 1409699/55887
CATERPILLAR D6R Equalizer Bars Core 2012078/38992 CATERPILLAR 980G Final Drive Rebuilt 1605585/8037 CATERPILLAR 773D Final Drive Rebuilt 1376821/66627 CATERPILLAR D11R,D11T Final Drive Rebuilt 3242343/46124 CATERPILLAR D11R,D11T Final Drive Rebuilt 3242343/59220 CATERPILLAR 314D LCR Final Drive Used 3327499/62256 CATERPILLAR 322B,322B LC,322B LR,322BL,322BL LR,322BLN Final Drive Rebuilt 1141488/61170 CATERPILLAR 385C Final Drive Rebuilt 1994661/68239 CATERPILLAR D6H Final Drive Rebuilt 3W6494 CATERPILLAR D8N,D8R,D8T Final Drive Used 1575072/62601 CATERPILLAR 988F,988F I Final Drive Used 4E2664/43974 CATERPILLAR 320 Final Drive Rebuilt 7Y1571/37840 CATERPILLAR 345B Final Drive Rebuilt 1362847 CATERPILLAR D8T,D8T LGP,D8T LGP WDA,D8T II,D8T WDA,D8T XL Ripper Used 2156422/55537 CATERPILLAR D6T,D6T LGP,D6T LGP VP,D6T LGP WDA,D6T XL,D6T XL DS,D6T XLVP,D6T XW,D6T XW LGP,D6T XWVP Ripper Used 3871087/65643 CATERPILLAR 311 Swing Drive Used 7I7761/57080 CATERPILLAR 385,385B,385B ME,385BL,385BL LR,385BL ME,385BL UHD,385C,385C FS,385C LRE,385C ME,385CL,385CL LR,390DL Swing Drive Rebuilt 1484626/57063 CATERPILLAR 824B,836,836C Torque Converters Rebuilt 1431234/56095 CATERPILLAR 988H Torque Converters Rebuilt 1285303/52676 CATERPILLAR 773B Torque Converters Used 6T4674/42945 CATERPILLAR D6N LGP Torque Converters Rebuilt 1880502/44386 CATERPILLAR 970F Torque Converters New 1463329/43970 CATERPILLAR 836G Torque Converters Rebuilt 1457109/52159 CATERPILLAR D10R Torque Converters Rebuilt 1102769/35220 CATERPILLAR D11,D11N Torque Converters Rebuilt 3T9677 CATERPILLAR D11R Torque Converters Used 1210030/47691 CATERPILLAR D8,D8L,D9N Torque Converters Rebuilt 9P4890 CATERPILLAR 988H Torque Converters Rebuilt 1285303/52676 CATERPILLAR D10L,D10 Torque Converters Rebuilt 6P6412/31183 CATERPILLAR D8R,D8R II Track Frame Rebuilt 9W6491 & 9W6492 CATERPILLAR D11,D11N Track Frame Rebuilt 6Y2686/54865 CATERPILLAR D11,D11N Track Frame Rebuilt 6Y2687/54866 CATERPILLAR D11N Track Frame Used 6Y2686 & 6Y2687 CATERPILLAR 988B Transmissions Rebuilt 9W0782/32318 CATERPILLAR 824C Transmissions Used 3P6809/33473 CATERPILLAR D11N Transmissions Rebuilt 7T8168/56623 CATERPILLAR 773D Transmissions Rebuilt 9G9624/56648 CATERPILLAR D8R Transmissions Rebuilt 1058185/66630 CATERPILLAR 988G Transmissions Rebuilt 1922914/66703 CATERPILLAR 930G,938G Transmissions Used 2348866/32134 CATERPILLAR 988H Transmissions Used 2306315/68806 CATERPILLAR 16 Transmissions Used 9M8300/42387 CATERPILLAR D8R Transmissions Used 2192624/47692 CATERPILLAR 980G Transmissions Used 1066452/68237 CATERPILLAR 924G Transmissions Rebuilt 1402772/57646 CATERPILLAR 988F Transmissions Used 6Y6719/64339 CATERPILLAR D8R Transmissions Rebuilt 1058185/66630 CATERPILLAR 992C,992D Transmissions Rebuilt 3P9241/59831 CATERPILLAR D5H Winch Used 08929/51595
WWW.CLEVELANDBROTHERS.COM USED PARTS - 1.855.545.0267 ext. 2
D8T Winch, good used take off Stock # 09074/71769
D6T Winch, good used take off Stock # 09056/71087
D11N Final Drive, Rebuilt Stock # 9W3649/69995
G P Bucket 980K New Surplus Stock # 3304357/69718
Page 20 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CAT CP563, S/N CNT00635 ................................................$66,250 CAT CP563C, S/N 5KN00120 ..............................................$49,500 CAT 953C, S/N 2ZN02093....................................................$42,000 CAT 953C, S/N 2ZN03127....................................................$52,000 CAT 953C, S/N BBX02880....................................................$79,500 CAT D4G, S/N TLX01103 ....................................................$42,500 CAT D5, S/N 96J00825 ........................................................$18,500 CAT D6H, S/N 3ZF00827......................................................$35,000 KOMATSU D41P-6, S/N B40102 ........................................$39,500 CAT 315CL, S/N CJC00868 ................................................ $49,000 CAT 320CL, S/N PAB07076..................................................$68,500 CAT 320CL, S/N PAB07195..................................................$67,500 KOMATSU PC55, S/N 15203................................................$35,000 CAT 12H, S/N 4XM00903 ....................................................$82,500 CAT 420D, S/N FDP04701....................................................$29,000 CAT 725, S/N B1L00360 ......................................................$89,500 CAT 730, S/N B1M00436 ....................................................$92,500 VOLVO A25D, S/N 11933 ....................................................$67,500 SAKAI SV400T, S/N 30162 ..................................................$45,000 CAT 257B, S/N SLK09683....................................................$25,000
THE IRONPEDDLERS 704-289-8591 • 800-438-1933 www.ironpeddlers.com
CAT 953C, S/N 2ZN03127 $52,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 21
Page 22 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Highway Safety Award‌
7
ARTBA Honors Anderson for His Contributions
Ready y. Set. Save on o Kubota’s SVL Series compact track loader s.
Call Jeremy for Service & Brian for Parts.
704-233-4242 800-443-7569 Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm
3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com
Low Rate Financing Available. Call us for details.
GRZQ $ 3 5 ÂżQDQFLQJ IRRU XS WR PRQWKV RQ SXUFKDVHV RI QHZ .XERWD 69/ 6HULHV HTXLSPHQW LV DYDLODEOH WR TXDOLÂżHG SXUFKDVHUV IURP SDUWLFLSDWLQJ GHDOHUVÂś LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU ÂżQDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH ÂżQDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIIHHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ IHU H[SLUHV 6HH XV IRRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIH IRU PRUH LQIRRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ
kubota.com
Š Kubota Trractor Corporation, 2016
www.kubota.com
Blue Def got you feeling Blue? Why not Factory remanufactured?
Full FACTORY warranties • Call us today for details.
JACKSONVILLE LOCATION
POLK CITY LOCATION
103 BRYAN STREET JACKSONVILLE, FL 32202 904-354-5746 FAX: 904-355-1891
600 N. COMMONWEALTH AVE. POLK CITY, FL 33868 863-984-6262 FAX: 863-984-6363
Watch Video
Turn your old machine
Into a new machine Pinnacle Central Company Inc has Remanufactured machines on stock
RENTALS, SALES, SERVICE, PARTS, COMPRESSORS, GENERATORS, LIGHT TOWERS, ABRASIVE BLASTING EQUIPMENT, DUST COLLECTORS, AIR DRYERS, DEHUMIDIFIERS, MANLIFTS
For nearly 30 years, members of the American Road & Transportation Builders Association’s (ARTBA) Traffic Safety Industry Division (TSID) have honored public and private sector professionals with the prestigious “Jake Landen Highway Safety Award.� The award, which is named after the 3M executive who served as ARTBA chairman in 1976, is presented annually to those who have “made significant and lasting contributions to the safety of our nation’s highways.� The 2015 private sector award winner is Ennis-Flint Chairman Bryce Anderson, whose more than 50 years in the industry are a testament to his life-long commitment to safety on America’s roadways. Anderson began Anderson Striping in 1967 as a parking lot striping contractor and consistently invested in the industry as a contractor and manufacturer and a volunteer for countless industry events. From that small beginning, Anderson has grown his company, Ennis-Flint, into one of the largest traffic safety and pavement marking companies in the world. The 2015 public sector award winner is King W. Gee, the current director of engineering and technical services for the American Association of State Highway & Transportation Officials (AASHTO). Prior to joining AASHTO, Gee had a distinguished 35year career with the Federal Highway Administration (FHWA), guiding oversight of major projects including safer and longer-lasting construction methods and materials. Gee has been recognized with the U.S. Presidential Rank Award for Meritorious Service in 2000 and 2008 as well as the U.S. Department of Transportation’s Gold, Silver and Bronze Medals for Exceptional, Meritorious and Superior Achievement. “Bryce Anderson and King Gee both define the virtues of this award, showing professional integrity, dedication, involvement and a pioneering spirit,� said ARTBA Senior Vice President of Safety and TSID Managing Director Brad Sant. “They serve as examples of those who believe in their work to make America’s roads safer.� The awards were presented at the annual TSID “Summer Social� in early June, held in Savannah, Ga. To be eligible for the Landen award, a person must have been employed, or be retired from, a private business or public agency, made a significant contribution to highway safety and be nominated by an ARTBA TSID member. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 23
HALE HAS IT! Concord, NC 800-438-2250
Jacksonville, FL 800-828-3055
www.haletrailer.com Weight Laws are Changing! Heavy Haulers: we have the axles, jeeps, flip boxes and spreaders you need. IN STOCK
New East Florida Spec Dumps, 24' x 96" x 60" triaxle suspension, electric tarp
New Manac Steel Drop Deck Extendables 53’-71’x102” wide, 34” Deck Height, Tri-Axle Suspension, Air Lift
YOUR DEALER FOR HEAVY HAUL EQUIPMENT NEW Fontaine Steel Flatbeds, 48’x102” Spring Sliding Suspension Winches & Bulkhead Included
NEW 65-Ton Capacity Widespread Available: Talbert, Etnyre, Trail King
New Talbert 20 Ton tags, 21' deck, 6' beaver tail, 17.5 wheels
New East Walking Floor Trailers, 48' long x 102" x 13', spring suspension; Keith walking floor installed.
New Manac Composite Drop Deck Trailers, 48’ x 102”, Air Ride Spread, Sliding Winches, Galvanized Cross Members
New Manac Hardox Steel Dumps, 40’x102”x100”, Single Point Susp, 87 Cu. Yds, Frameless and Frame Type, Also Available w/76” Sides
New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys, 26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available
NEW TALBERT & FONTAINE 5O & 55 TON LOW BOYS, Flat Level Deck & Raised Center, 25’ & 26’ Deck Lengths, (2) King Pin Locations, Automatic 3rd Axle Air Lifts, 275/70R 22.5, 3+1 Capability, In Stock!
Talbert 35 Ton Lowboys 22" Deck Height, Air Ride Suspension
New Landoll Slide Axle Trailers, 50'x102", air ride suspension, 20K winch, wireless remote, PSI system & dock levelers optional
IN STOCK
New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys IN STOCK
New Etnyre Asphalt Tanks 42'x96", Air Ride Suspension, 7500 Gallons, Aluminum Barrel, 375 Degrees, Aluminum Wheels IN STOCK
New Fontaine Velocity Steel Drop Decks, 48’x102”, Air Ride Spread Bulkhead and Winches
New Etnyre 35 Ton & 55 Ton Paver Special Low Boys, Air Ride Suspension, Tandem & Triaxle
Excellent We Rent Lowbeds Financing We Rent Walking Floors Available
View Our Inventory at
www.haletrailer.com
We Rent Lowboys, Blade Trailers, Etc.
Page 24 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15
Made in the USA
The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring
STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:
Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062
1-800-683-5189 Fax: 770-509-5832
Visit
www.sealsaver.com
for more information or contact us at 1-800-683-5189
704-888-1114 • Fax: 704-888-2377 NOW RENTING EQUIPMENT IN THE CHARLOTTE, NC METRO AREA 1334 Hwy 24/27 Midland, North Carolina sales@wilcoxtractor.com • www.wilcoxtractor.com
AGGREGATE EQUIPMENT-SCREEN 2016 GATOR RMS620X3, "UNUSED" 6' X 20' 3 DECK SCREEN WITH WATER SYSTEM, Stock Number: 5249 ..............Call 2006 Komptech Magnum, Portable gold screen plant, 6’x24’ drum, discharge conveyors, 6” CAT DSL pump, 40’ sluice & more ............................................................................................................................................................................Call for Price 2000 MULTITEK 605B, Portable 5’x6’ trammel, JD Diesel, Folding Discharge Conveyors, Good Running Condition$39,500 2003 Re-Tech 832 Olympian II, Portable gold ming trammel, 8’x32’, water sys, sluice boxes, 325CU Meters per hr, 6” pump, 40’x4’ sluice box ............................................................................................................................................................Call 2000 SCREEN USA HM35D2, Portable Screen w/hopper, grissly, shaker screen & Discharge conveyor, JD Diesel Power, portable................................................................................................................................................................................$22,900 COMPACTORS 1996 CAT CS-563C, 84” Vib Smooth Drum, Good Tires, ROPS ....................................................................................$33,900 2007 Ingersoll-Rand SD116DX, EROPS Cab with AC, 84” smooth drum, Good tires ................................................$45,000 LOADERS 1995 CAT 953B LGP, above average, very clean, work ready, 4/1 bkt w/edge guards, ROPS, strong running machine .......... ..............................................................................................................................................................................................$36,500 2007 CAT 966H, EROPS, QC GP Bkt w/Teeth, QC Forks, RC, 26.5x25 ........................................................................$107,500 DOZERS 2006 CAT D9T, EROPS, SU/Tilt Blade, Excellent U/C, Rear C/W, Low Hrs ..................................................................$235,000 2000 CAT D8R, EROPS, Winch, VG U/C, 8U/Tilt............................................................................................................$117,500 2005 DEERE 655C II, EROPS, AC, GP BUCKET WITH TEETH, EXCELLENT U/C, ORIGINAL PAINT, TIGHT AS A DRUM! Stock Number: 3297 ..........................................................................................................................................................$36,500 2005 DEERE 700H LGP, AC, CAB, PAT BLADE, VERY GOOD U/C, EXCELLENT RUNNING MACHINE! Hours: 9,180, Stock Number: 3297 ....................................................................................................................................................................$43,500 2006 Komatsu D65EX-15, EROPS, AC, 3 Tyne Ripper, SU Tilt Blade, Excellent U/C, blade face and cutting edges are excellent, very good running machine ......................................................................................................................................$63,500 EXCAVATORS 2007 Bobcat 442D, EROPS, AC, Dozer Blade, Axillary Hydraulics, low hours, excellent condition..............................$38,500 1993 CASE 9010, 28” TGP, 30” Bucket, good clean, straight machine, runs & operates well ....................................$26,500 2011 CAT 308D CR, AC CAB, AUXILLARY HYDRAULICS, DOZER BLADE, RUBBER TRACKS, EXCELLENT CONDITION! Hours: 2,469, Stock Number: 3304 ..................................................................................................................................$54,500 2011 CAT 308D CR, EROPS, AC, Aux Hyd, 18” TGP, 28” GP, mint condition, Hyd. Thumbs available at extra cost, 2,389 hrs ..............................................................................................................................................................................................$54,500 2011 CAT 308D CR, EROPS, AC, Aux Hyd, 18” TGP, 28” GP, mint condition, Hyd. Thumbs available at extra cost, 2,123 hrs ..............................................................................................................................................................................................$54,500 2008 CAT 312CL, 10’ Stick, Aux Hyd, 24” TGP, GP Bkt, AC............................................................................................$52,500 2003 CAT 330CL, 12’ Stick, 34” Shoes, VG Condition ....................................................................................................$54,500 2003 CAT 330CL, 10’6” stick, aux. hyd., GP Bkt., 34” Shoes, super clean work ready machine ........................Call for Price 2010 DEERE 160D LC, AC, Aux. Hyd., 3-24” TGO, 36” GP Bkt, very tight, strong running machine ..........................$59,500 2013 DEERE 160G LC, AC, Aux Hyd., 36” GP BKT., pattern changer, tight turntable, strong pumps, excellent running condition ......................................................................................................................................................................................$64,500 2012 DEERE 200D LC, HYDRAULIC THUMB, PATTERN CHANGER, AC, 32" TGP, 45" GP, EXCELLENT APPEARANCE, VERY STRONG RUNNING MACHINE, Hours: 5,711, Stock Number: 3295..............................................................................$72,500
2011 DEERE 200D LC, AUXILLARY HYDRAULICS, PATTERN CHANGER, AC, 45" GP W TEETH 32" TGP, SUPER STRAIGHT, EXCELLENT APPEARANCE, EXCELLENT CONDITION! Hours: 4,950, Stock Number: 3296....................$69,500 2005 DEERE 330C LC, 54” GP Bkt w/QA, Tight Turntable, VG U/C ................................................................................$47,500 2002 HITACHI EX160 LC-5, 10'2" STICK, QUICK ATTACH 28" GP W/TEETH, 24' TGP, VERY GOOD RUNNING MACHINE, Stock Number: 3299 ..........................................................................................................................................................$39,500 (2) 2007 Komatsu PC78US-6, EROPS, AC, Dozer Blade, 18” Rubber Tracks, super clean machine ..........................$36,500 2007 Komatsu PC138US LC-8, EROPS,AC, Dozer Blade, Aux, Hyd., 28” TGP, reverse camera, excellent condition $45,000 2004 KOMATSU PC160LC-7, Aux. Hyd, 40” Bkt, 24” TGP..............................................................................................$49,500 2004 Komatsu PC160LC-7, Aux. Hyd., 24” TGP, Quick Attach 42” GP Bkt, very good U/C, tight turntable, very good appearance, very good operating machine........................................................................................................................$42,500 2005 Link-Belt 135LX, EROPS, AC, Dozer Blade, Aux. Hyd., 24” TGP, low hours, clean machine..............................$54,500 2011 Takeuchi TB1140, AC, Dozer blade, swing away boom, 8’5” Stick, Aux Hyd., Check Valves ............................$54,500 FORKLIFTS / LIFTS / OTHER 1999 Genie S40, 4x4, 40’ 2 section boom, Duetz Diesel, power to platform, Hydraulic rotation, excellent working machine ..............................................................................................................................................................................................$13,900 2008 GEHL DL12H40, 12,000# 40’ Lift, Hyd. Leveling....................................................................................................$33,500 2003 I/R RT706H, 3394 Hrs, 6000Lb ..............................................................................................................................$15,900 2006 JLG 1930ES, 500, 19’ lift height, 25’ work height, excellent condition, 2 available................................................$4,900 2005 TEREX AL4060D-4MH, portable diesel 4 light plant/generator, very good condition ............................................$3,500 1999 Thompson 6HT653, 6” portable trash pump, diesel engine, 2100 GPM, 3.0” solids, very good condition ......$12,900 2003 Thompson 8VWDIDS45, 8” Trash Pump, 3100 GPM, 3.25 solids, JD Diesel, skid mounted ............................$12,900 GRADERS 2004 CAT 14H, West Coast Location, Front Push Block, 16’ MB, 20.5x25..................................................................$135,000 2002 CAT 14H, West Coast Location, Front Push Block, 14’ MB, 20.5x25..................................................................$127,500 OFF HIGHWAY TRUCKS 2007 CAT 730, A/C, Retarder, Excellent 750/65R25 Tires, Super Clean ......................................................................$109,501 2006 CAT 730, C11 Eng, 319 HP, Retarder, VG Tires, Excellent....................................................................................$107,500 1999 CAT D25D, VERY STRAIGHT, EXCELLENT 26.5X25 TIRES, EXCELLENT APPEARANCE, VERY GOOD OPERATING MACHINE, Stock Number: 3288........................................................................................................................................$36,500 2000 CAT D250E, AC, Retarder, Very Good Tires ............................................................................................................$49,500 2002 DEERE 250D, AC, Retarder, Tailgate, Super Clean, 23.5Rx25................................................................................$79,500 2003 KOMATSU HM400-1, AC, Retarder, VG 29.5R25 Tires, Excellent ........................................................................$54,500 GENSETS / SKID LOADERS 2013 HIPOWER 310 KVA, JD Diesel, Insulated Cabin ....................................................................................................$59,500 2011 HI-POWER 50KVA, 120/480V 3 Phase, Sound Suppression ................................................................................$12,900 SKID STEERS-TRACK 2006 BOBCAT T190, CAB W AC, AUXILLARY HYDRAULICS, 90% RUBBER TRACKS, GOOD RUNNING MACHINE! Hours: 3,077, Horse Power: 66, Operating Capacity: 1,900 lb ....................................................................................................$24,900 2013 CAT 257B3, LOW HOURS, COMES WITH NEW GP BUCKET, EXCELLENT LIKE NEW CONDITION!! Hours: 770, Horse Power: 71, Stock Number: 3292 ............................................................................................................................$31,900
Ralph Petta…
ELFA President Blames Uncertainty for Mixed Report The Equipment Leasing and Finance Association’s (ELFA) Monthly Leasing and Finance Index (MLFI-25), which reports economic activity from 25 companies representing a cross section of the $1 trillion equipment finance sector, showed its overall new business volume for April was $7.3 billion, down 12 percent from new business volume in April 2015. Volume was down 10 percent from $8.1 billion in March. Year to date, cumulative new business volume decreased 10 percent compared to 2015. Receivables over 30 days were 1.2 percent, unchanged from the previous month and up from 0.89 percent in the same period in 2015. Charge-offs were 0.30 percent, down from 0.5 percent the previous month. Credit approvals totaled 78.2 percent in April, up from 77.7 percent in March. Total headcount for equipment finance companies was up 0.6 percent year over year. Separately, the Equipment Leasing & Finance Foundation’s Monthly Confidence Index (MCI-EFI) for May is 55.1, a decrease from the April index of 59.1. ELFA President and CEO Ralph Petta said, “With April data showing declining originations, mixed portfolio quality, and a lower level of confidence by equipment finance executives, it appears that political uncertainty joins economic uncertainty as one of the reasons businesses are holding off investing in capital equipment at this time. Sluggish activity to begin the second quarter seems to have continued the relatively soft Q1, both in terms of overall equipment finance industry performance and economic activity.” Thomas Partridge, president, Fifth Third Equipment Finance, said, “We continue to see good demand for capital equipment across all of our in-footprint regions, which include the Midwest and Southeast, as well as across the country through our national sales force. The picture remains favorable for those looking to finance capital equipment, as interest rates remain low and credit markets remain very competitive. The recent weakening of the dollar should help those companies focused on exporting goods and services. Given the low price of oil, as well as some of the recent bankruptcy filings, those with ties to the oil industry have a significant opportunity to restructure existing facilities.” For more information, visit www.elfaonline.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 25
Page 26 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PIRTEK Rockville Earns Honors as Top Franchise
ORDER DIRECT
& SAVE
SALESEVENT TIER 3 750-1800 CFM
STILL AVAILABLE
D90PKU
DF900PH3CU
The D90PKU is a 90 CFM\100 psi single tool portable air compressor powered by a Kubota Tier 4 Final Engine.
The DF900PH3CU is a 900 CFM\150 psi Tier 3 Flex engine portable air compressor powered by Cummins.
$13,999* $78,900* *Price does not include shipping, all units are Exworks Michigan City, Indiana
Orders by September 30, 2016
Orders will be delivered through your Sullivan-Palatek distributor
For more details, call us at 219-874-2497
Discover More
Ǻ
www.sullivan-palatek.com
PIRTEK Rockville in Rockville, Md., has earned top honors as the PIRTEK USA’s National Franchise of the Year for 2015. The company presented the award during its annual conference to business owner David Entwistle for his franchise’s outstanding performance, operational excellence, commitment and enthusiasm for the brand. “To be chosen for this award out of all the great PIRTEK franchises around the country says a lot,” Entwistle said. “Our team has worked so hard to make our location function at peak efficiency and quality. This is a nice recognition of all that effort, and we appreciate it.” PIRTEK is the leader in fluid transfer solutions. The company’s annual conference brings together the nearly 60 owners from across the United States to network, enhance their business development opportunities, and discuss and share strategies. Family members also attend, as the event features fun and lively entertainment options. This year’s conference was at the Renaissance Orlando at Sea World in Orlando, Fla. Several other franchisees were honored during the event, including Ken Adair who received PIRTEK USA’s National Top Sales Award for 2015 on behalf of PIRTEK O’Hare in Elk Grove Village, Ill. — one of three company franchises he owns. His PIRTEK McKinley Park in Chicago won the Midwest Regional Franchise of the Year. Other owners who earned recognition for high performance in their geographic regions included the Southeast top performer, Jennifer Prendergast at PIRTEK Space Coast in Rockledge, Fla. Spousal team Jim and Laure Phillips of PIRTEK Jersey Village in Houston earned the Southwest award, and Paul Martin of PIRTEK Long Beach in Signal Hill, Calif., was named the West Coast top performer. Also in attendance during the annual conference was IndyCar driver Matt Brabham, a member of PIRTEK Team Murray, along with the IndyCar he’ll drive for the 100th race of the Indianapolis 500 in May. Conference attendees had an opportunity to see the high performance racing machine up close. “It’s an exciting time for all of us at PIRTEK as we continue this wave of expansion across the United States,” said Glenn Duncan, executive director of PIRTEK International. “All the new service & supply centers, the enhanced product lines and the release of new PIRTEK-branded products, we’re experiencing significant growth. Best of all, we have a wealth of highly motivated and talented business owners successfully leading their franchises.” PIRTEK has launched 11 service & supply centers in the United States since 2014, and has released numerous fluid transfer products bearing the company brand, including hoses, fittings, oils and lubricants. With more than 400 service & supply centers and 2,000 mobile service vehicles in 23 countries around the world, PIRTEK serves the needs of industries including construction, manufacturing, mining, automotive, oil and gas, marine and more. For more information, visit http://www.pirtekusa.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 27
Page 28 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Brian McCarty Passes Away Brian David McCarty died June 5. He was 44. Mr. McCarty is survived by his wife Carolyn DeNoia McCarty and three children. Cameron Ada, William “Miller” and Grayson Wright. Mr. McCarty is survived by his parents William Frank and Rubinette McCarty and his brother and sister-in-law Mark and Lisa McCarty and their two sons Justin and Matthew McCarty. He is also survived by his mother and father-in-law Nancy and Michael DeNoia. He was predeceased by his grandparents Frank and Marian Haywood and Hunter and Katie McCarty. Mr. McCarty was part owner in the family business, White Oak Equipment, along with his brother Mark and his uncle Tom Ficklin. His father started the business 46 years ago. Mr. McCarty loved and was grateful for all the White Oak family. They worked together, laughed together and took care of each other, according to relatives. In a statement, White Oak Equipment officials said, “It is with immeasurable grief that we mourn the loss of Brian McCarty. Brian’s simultaneous roles in the company were shareholder, branch leader, salesper-
son, fellow worker, relative and friend. Outside of work, he was a loving husband and a wonderful father. He filled each of those roles with his kind, gentle nature and warm, affirming spirit. He will be greatly missed.” Mr. McCarty was an involved father to all of his children. He participated in their lives and shared their passions. On the weekends, you would find him in the driveway hitting tennis balls with either of his sons or at gymnastics meet videotaping his daughter. He taught them to play golf, fish and drive a boat. In lieu of flowers, the family asks that donations be made to Commonwealth Autism, c/o The Founders Center, 4108 E. Parham Road, Richmond, VA 23328. Checks should be made to “The Founders Center” and donors should write “in memory of Brian McCarty” in the subject line. Donations also can be made at http://thefounderscenter.org, an organization that is very important to the family. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Iron Peddlers Meets Its Customers’ Needs, Returns to Atlanta When Iron Peddlers moved out of its branch in Atlanta, Ga., the company’s customers noticed. The company, headquartered in Monroe, N.C., specializes in selling used parts and rebuilt components for heavy equipment. The company also sells, leases and rents all types of construction equip-
Mitchel Griffin dyno tests a Caterpillar 3306 engine.
Don Moore, branch manager of the new Iron Peddlers store in Buford, Ga.
Corey McCain stands in Iron Peddlers’ Monroe, N.C. warehouse.
ment. “When we kept our old Atlanta phone number from our old facility we received numerous calls from our repeat customers wanting to come in and pick up parts,” said Anthony Broome, owner of Iron Peddlers. “When they found out there was a branch in Monroe it was too far for them. We really wanted to get reintroduced in the market as soon as possible so we could service our current local customers.” In response to its customers’ demands, Iron Peddlers is now reentering the Atlanta marketplace in Buford, Ga. The
new branch is north of Atlanta and a little south of Greenville/Spartanburg. The branch is a parts location and is selling engines, rebuilt and dyno tested engines and transmissions, different size buckets/teeth, blades, filters and will feature a new and used tire division that spans over all of the company’s branches. According to Broome, dyno testing involves putting a load on the component to make sure that nothing is going to break, and nothing is going to misfire before it gets into a machine. As for the rebuilt engines and see IRON page 104
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 29
goodbye downtime YOU STOP PRODUCTION, YOU LOSE MONEY. It's a challenge to keep things moving when you burn hundreds of gallons of diesel each day. It's even harder if you have to mess with DEF. Add in daily maintenance, and downtime can directly threaten your profits.
THE MOST VERSATILE FUEL AND DEF SOLUTIONS FOR JOB SITE SERVICE / Transport diesel in bulk / Protect Tier 4 machinery with ISO compliant DEF systems / Trailers, totes and bulk solutions available
SCHEDULE YOUR DEMO | ThunderCreek.com
All-In-One Jobsite Service Solutions 800.744.0453 | ThunderCreek.com | ®
Page 30 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hydraulic Breakers Padding Buckets CUT Multi Crushers
Pulverizers Compactors Auto Lube Kits
Learn more about our full line of attachments:
OkadaAmerica.com (800) 270-0600
QUALITY Q UALIT Y USED EQUIPMENT E Q UIPMENT PRICE REDUCED!
$55,000
$90,000
MA21464
EEXCAVATORS XCA V A TORS
S/N ALLY01679 Y01679
»
»
2012 CA ATT 316E DZW00617 MA19759 ............................... $161,500 2012 CA ATT 316EL DZW00300 MA21783 ............................ $157,500 2014 CA ATT 305E XFFA04058 MA22537................................... $70,000 2015 CA ATT 311F RR KCW00234 MA20528 ................................ $150,000
TR AM AC
»
Ř 0RXQW D 7UDPDF 5RFN %UHDNHU DW \RXU SULPDU\ Ř $YRLG JDSV LQ SURGXFWLRQ Ř 5HDFK LQ TXLFNO\ WR EUHDN DQG FOHDU EULGJHG DQG EORFNHG PDWHULDO Ř (QVXUH VDIHW\ ,QFUHDVH SURGXFWLRQ DQG UHOLDELOLW\ Ř 7UDPDF LV D \HDU ROG IDPLO\ RZQHG FRPSDQ\ :H VSHFLDOL]H LQ 5RFN %UHDNHU (QJLQHHULQJ 0DQXIDFWXULQJ 6DOHV DQG 6XSSRUW
WHEEL LOADERS
MA16230
2012 CASE 821F 2745 HRS
TRAMAC
800-526-3837
www.tramac.com
»
2012 CA ATT 950K R4A00487 MB21002 .................................. $175,000 2015 CA AT T 924K PWR04385 MA22022 .................................. $140,000 1996 CA ATT 938F 1KM01738 MA22146 ......................................... $33,000 2012 CA ATT 938K SWL00371 MA21618 ................................... $157,500 2008 KOMA ATSU WA250 A76034 MA20303 ................ $83,500 1994 CA ATT 936F 8AJ01435 MC21543................................ $32,000 2010 DEERE 544K 631818 MA20811.................................. $126,500
$137,500 S/N / NBF213226
VVisit isit ButlerIRON.com Butler IRON .com NO RT H D A KO TTA A | | SO U T H D A KO TTA A
2012 CA ATT 308E 2746 2746 HRS
2008 2010 1998 2004
S/N GBJ00612
TRACK T RACK TY TYPE PE TTRACTORS RACTORS
MOTOR GRADERS
»
2001 CA AT 143H AWD 1AL00879 MK003555....................... $69,000 2009 CA AT 140M B9D01941 MA21112 ................................ $120,000 2005 CA AT 140H APM02461 MA16794 ................................ $115,000 1996 CA AT T 140H 2ZK01480 MB16759 .................................. $76,500 2009 CA AT 140M AWD W B9G00160 MA20714 ............. $130,000 2009 DEERE 770G 625360 MA21115 ......................... $115,000 2007 DEERE 772D 615464 MB13626.................................. $95,000
$92,500
$32,000
MA22539
MC21543
2001 CA AT T 140H
1994 CA AT T 936F
S/N / 2ZK06048
»
CA CAT T D6T XW DJG00324 MA21470 ........................... $154,500 CA AT T D7E MDB00151 MA16776 ................................ $289,000 CA AT T D6R LGP 9PN00794 MA07617 ........................ $57,500 KOMA ATSU TSU D155AX 76067 MA19713 ................. $99,500
»
S/N MDY00160
MA22084
2005 CA AT T D6N LGP 6402 HRS
»
2003 CA AT T 318C 7572 HRS
KEEP YOUR BELTS FULL.
$81,000
MA13913
S/ 8AJ01435 S/N
Call Bill Bauer or Austin Calavera at 888.344.2973 E X P E R I E N C E T HE BUT L E R DI F F E R E N C E
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 31
Hydrema ydrema 912HM. O Off ff Road Road s superior. uperior. Talk T alk tto oY Your our loc local al de dealer aler or visit h hydrema.us ydrema.us
P
www.ringpower.com Locations - FL
www.yanceyrents.com Location - GA
www.thompsonmachinery.com Locations - AL, FL panhandle
www.louisianacat.com Location - LA
www.gregorypoole.com Locations - Eastern NC
www.powerequipco.com Location - TN, East AR
www.puckett-cat.com Locations - MS
www.carolinacat.com Locations - Western NC
www.link-beltmidatlantic.com Location - VA
www.blanchardmachinery.com Location - SC
Page 32 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
YOUR SOURCE FOR
SALES AND RENTALS CRAWLER TRUCKS, STUMP CUTTERS AND FORESTRY MULCHERS
SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM
4 Tool Boxes Available All Include Slugs and O'Rings.
800.392.2686
For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com
www.flangelock.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 33
CLEAR THE W WA AY
FROM OUR SIGNA SIGNATURE ATURE TURE BULL HO HOG, OG, TO TRACKED CAR CARRIERS, RRIERS, TO FORESTR FORESTRY RY A ATT ATTACHMENTS, TTTACHMENTS, W WE HA HAVE AVE VE A RUGGED, DURABLE PRODUCT FOR EVER EVERY Y APPLICA APPLICATION. PPLICA ATION. TION. BUIL BUILT LTT BRUT B BRUTALLY TALL ALLLY TOUGH AND OPERA OPERATOR-FRIENDLY, ATOR-FRIEND TOR-FRIENDL DLLY, SO YOU CAN CLEAR CLEAR THE W WA WAY AY TO A JOB J WELL DONE.
800.528.3113
fecon.com
Page 34 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WHATEVER IT TAKES TO GET THE JOB DONE RIGHT MAGNETS • GRAPPLES • SCRAP SHEARS • CLAMSHELL BUCKETS CONCRETE DEMOLITION • ROCK + LOG GRABS • DYNASET ACCESSORIES Magnets
Concrete Demolition
Bucket Crusher for Rock & Concrete
Grapples
Products for the Rail Industry
Clamshell Buckets
Dynaset Hydraulic Accessories Scrap Shears
GENSCO AMERICA, INC. ACROSS USA 800-268-6797 • 5307 Dividend Dr., Decatur, Georgia 30035 • 770-808-8711 • Fax: 770-808-8739
GENSCO EQUIPMENT (1990) Inc. 53 Carlaw Ave., Toronto, Canada M4M 2R6 • 416-465-7521 • Fax: 416-465-4489 • email: info@genscoequip.com • www.genscoequip.com
“Is your stick too short?” Add 6’-30’ of length to your reach with Add-A-Stick. Overall length determined by excavator weight class. Add 4’-12’ to your reach with Add-A-Boot. Overall length also determined by your excavator weight class. Call: 888-504-1679 www.add-a-stick.com Email: sales@bdfabricators.com Add-A-Stick and Add-A-Boot are members of the
fabricators family.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 35
IMAGINE WHAT’S NEXT. Register today to get the ultimate view of where construction is going. Imagine less downtime. Imagine being more efficient. Imagine seeing what’s next from over 2,500 exhibitors spread out over 2,500,000 square feet. Imagination becomes reality in Las Vegas on March 7–11, 2017— and if you make your reservation right now, you can ensure your spot at this huge event... and save!
Get the special $149 rate (and save up to $100) by registering early at www.conexpoconagg.com.
March 7–11, 2017 | Las Vegas Convention Center | Las Vegas, USA
IF IT’S NEW, IT’S HERE.
Co-located with
®
Page 36 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
HARD WORKING MACHINES
NEED HARD WORKING PARTS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 37
• NO TIME LIMIT POWER BOOST
~
• 10% MORE BUCKET BREAKOUT • OPERATOR CONTROLLED UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.
MINI
SHORT RADIUS KOBELCO-USA.COM
CONVENTIONAL
Page 38 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Florida Powerscreen of Florida 5125 Frontage Rd. N. Lakeland, FL 33810 Tel: 863-687-7153 Fax: 863-680-1289 Web: www.powerscreenfla.com
Georgia Powerscreen of Georgia 3402 Grant Rd. Conley, GA 30288 Tel: 404-577-1483
Alabama & Mississippi Powerscreen Crushing & Screening 11901 Westport Rd. Louisville, KY 40245 Tel: 800-227-0534 184 Commercial Ct. Alabaster, AL 35007 Tel: 205-966-9775 Web: www.powerscreensales.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 39
G
T
Bobcat.com/Comfort11
Bo ©
Authorized Bobc at Dealer s
FFLORIDA LO
MISSISSIPPI
Bobcat of D Day tona Beach
Hat tiesburg
704-343-9000
704-9 - 33-2269
86 4-269-3600 • 877-654-3143
386-274-1002
601-296-2546 • 888-836-5537
w w w.bobcatofcharlot te.com
w w w.r sbraswell.com
w w w.bobcatops.com
Bobcat of Jacksonville, LLC
bobcat.equipmentinc.com
Bobcat of Johnston County
Triangle Equipment Co., Inc.
Bobcat of Myrtle Beach
Jacksonville
Bobcat of Jackson
Garner
Morrisville
Myr tle Beach
904-288-9181
Jackson
919-661-1833
919-781-7910 • 8 88-757-5613
843-236- 4499
www.bobcatjax.com
601-948-3272 • 888-836-5537
Bobcat of Monroe
w w w.ncbobcat.com
Bobcat of Spartanburg
Monroe
S SOUTH OUTH CA CAROLINA ROLINA
Spar tanburg
704-289-2200
Bobcat of Charleston
86 4-342-9003 • 877-654-3143
GEORGIA G EORGIA Bobcat of Augusta Augusta
bobcat.equipmentinc.com
N ORTH CA ROLINA NORTH CAROLINA Bobcat of Asheville
706-737-7253
Arden
Bobcat of Savannah
828-684- 4403
Bloomingdale 912-236-5588 • 877-654-3143 w w w.bobcatops.com
w w w.bobcatops.com
w w w.r sbraswell.com
Nor th Charleston
Bobcat of Wilmington
843-725-6330 • 877-654-3143
Wilmington
w w w.bobcatops.com
910-395-2050
Bobcat of Columbia
w w w.bobcatops.com
TTENNESSEE ENNESSEE Bobcat of Nashville La Vergne
Columbia
615-941- 4000
803-933-9996 • 877-654-3143
w w w.bobcatofnashville.com
w w w.bobcatops.com
Page 40 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Central Atlanta Tractor Sales, Inc.
Mashburn Equipment Rentals and Sales
May Heavy Equipment Rental & Sales
Earthmovers Construction Equipment
7330 Delta Circle Austell, GA 30168 770-819-6600
425 Frontage Road Ringgold, GA 30736 706-935-3485
www.centralatlantatractor.com
www.mashburnequipment.com
Raleigh, NC • 866-629-3784 Lexington, NC • 866-629-3784 Charleston, SC • 866-629-3784 Columbia, SC • 866-629-3784
8451 SW Old Kansas Avenue Stuart, FL 34997 407-401-8956 Fax: 407-574-8217
www.mayequip.com
www.constructionequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 41
JAmES RiVER EquipmEnT Ashland, VA 23005 804/358-6776 Asheville, NC 828/667-0176 Burkeville, VA 23922 434/767-5578 Fishersville, VA 540/337-3057 Tazewell, VA 276/596-9440 Asheboro, NC 27203 336/625-2212 Charlotte, NC 704/597-0211 Greensboro, NC 336/668-2762
Matthews, NC 28104 704/821-7399 Mt. Airy, NC 336/352-2240 Mt. Gilead, NC 910/439-5653 Salisbury, NC 28144 704/636-2671 Wilkesboro, NC 28697 336/973-8201 Rock Hill, SC 29730 803/325-1555
Raleigh, NC 919/772-2121 Greenville, NC 252/758-4403 New Bern, NC 252/638-5838 Fayetteville, NC 910/424-1200 Wilmington, NC 910/675-9211 Ahoskie, NC 252/332-5550
FLinT COnSTRuCTiOn & FORESTRY DiViSiOn 1206 Blaylock St, P.O. Box 3329 Albany, GA 31706 229/888-1212 Fax: 229/435-3612 Cuthbert GA 229/732-2631 Dothan, AL 334/794-8691 Troy, AL 334/566-4181 West Columbia, SC 29169 803/794-9340 Aynor, SC 29511 843/358-5688
Atlanta, GA 30336 404/691-9445 Braselton, GA 30517 770/965-1889 Adairsville, GA 30103 770/773-9857 Savannah, GA 912/964-7370 Brunswick, GA 912/264-6161 Ladson, SC 843/572-0400 Walterboro, SC 843/539-1420
COASTAL EquipmEnT www.coastalequipment.net 504 South Military Hwy Virginia Beach, VA 23464 757/424-1900 Yorktown, VA 23692 757/898-1900
Page 42 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
22ND ANNUAL
N.Y.S. HIGHWAY & PUBLIC WORKS
EXPO PRODUCED BY PROFILE PUBLICATIONS
WEDNESDAY, OCTOBER 19, 2016 8:30
Am TO
3:00
Pm
AmERITECH CENTER OF PROGRESS BUILDING • NY STATE FAIRGROUNDS, SYRACUSE, NY
The largest municipal expo in New York State for Town, City, Village, County, State & Other Highway & Public Works Pros! LUNCH SERVED 12:00-2:00pm Admar Supply Advance Auto Parts Air-Flo Manufacturing Co Inc. Akron Brass Company Alamo Industrial Allied Spring & Service Aquaphalt Auctions International Inc. BauVal Inc / Tech-Mix Beam Mack Sales & Service Beck Equipment Inc. Blair Supply Corp. Bobcat of C N Y – Bobcat Bobcat of C N Y - Bandit Bosch Rexroth Canada Buyers Products Company Carpenter Industries Central Petroleum Company Certified Cirus Control Systems Chemung Supply Corp. Cyncon Equipment Inc. D & W Diesel Inc. DEL Hydraulics, Inc. DewEze Manufacturing/Harper DICKEY-john Corp. Dig Safely New York
Call for Exhibit Space Today Join this Growing List of Exhibitors at the Show DSI Recycling Systems Inc. EJ USA Empire Hydraulics & Machine Filtrec Corporation Fire Service Safety Testing Inc. Five Star Equipment Fleetpride Inc. πFluid Power Service a div of Airline
Fort Miller FAB 3 Corp. Franklin Paint Co Inc. GECON Attachments Gillee’s Auto Truck & Marine GovDeals, Inc. Hawk Frame & Axle Helac Corp. Henderson Truck Equipment-NY Hybrid Building Solutions LLC IMUS/ Innovative Surface Solutions J-Tech Inc. J & J Equipment LLC J C Smith Inc. Joe Johnson Equipment (USA) Inc. Kenworth Northeast Kepner Equipment Inc. KH Industries
Lakeland Equipment Corp. Lawson Products Martin Engineering USA McIndoo Assoc/ARI-Phoenix Lifts MDI Truck Midland Asphalt Materials Inc. Milton Cat Inc. Mohawk Lifts Montage Enterprises New Horizons Petroleum Services North American Signal Company Northern Supply Inc. Nu-Look ProFinish Collision & Painting NYSAOTSOH On-Trux Ltd. Onspot Automatic Tire Chains Optronics International QPR Peirce-Eagle Equipment Co. Riccelli Northern LLC RTI Auctions RustKote LLC S&S Atlantic Division/Penn Power S & S Tractor Parts Inc. SealMaster- Buffalo Skanex Pipe Services
Produced by
Contact: Bob Buckley 800-992-7116 or E-Mail: bbuckley@cegltd.com 361 Shoemaker Road, Mohawk, NY 13407 • 800-988-1203
DOZENS OF DOOR PRIZES SMF Inc. Snap-Tite Culvert Liners Spaulding Manufacturing Stadium International Trucks STS Truck Equipment & Trailer Sales Steel Sales Inc. Sunnycrest Inc. TEC Solutions Tenco Industries Inc. The ODB Company Tracey Road Equipment Trius Inc. Traffic Safety Products, a div of Eberl Iron Works, Inc.
Truck-Lite Trux Outfitter Upstate Sweepers & Rentals Utility Auctions Vantage Equipment Viking-Cives USA Whelen Engineering Co Inc. Whites Farm Supply Winter Equipment Company Woodford Brothers Inc.
Paving
SECTION
Pages 43-53
For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.
Dynapac F1200C Compact Tracked Paver Offers Flexibility Atlas Copco’s compact Dynapac F1200C asphalt paver excels on a wide range of paving projects — from cycle paths, sidewalks, repair work, parking garages and sports fields — due to its high flexibility. The F1200C offers road construction contractors this flexibility with interchangeable working widths ranging from 4 to 10 ft. (1.2 to 3 m), high material filling capacity and a high paving capacity of 330 tons (299 t) per hour. The paver’s V-screed ensures excellent paving results with superior compaction and high quality asphalt mat, according to the manufacturer. The F1200C includes multiple features that maximize mat quality. Its Dynapac feed control system, for instance, eliminates material segregation and ensures continuous, uniform material flow through the paver with its four ultrasonic sensors and thin center chain box augers. The four sensors optimize both the auger and conveyor speed by measuring the material height and detecting gaps in the material. The conveyor’s 6-in. (15 cm) wide chain box ensures continuous, uniform material flow to the center of the screed. The paver’s center line drive auger includes 13-in. (33 cm) diameter flights to eliminate centerline segregation by providing optimal material flow. Its divided conveyor with its single drive system makes it possible to guide the material to either the left or right side of the screed for asymmetrical paving. Operators can easily pave close to walls with optional reduction shoes. Customers can choose between a vibration or a tamper & vibration screed that are either electrically or gas heated for precise, easy operation. The gas-heated screed reduces costs, accelerates heat-up time and features a gas bottle holder making it easier to change the small bottles from the side for easy transport. The electric-heated screed offers contractors a quick setup since it heats quickly due to its high capacity generator. Operators can set the screed’s required temperature using the dashboard’s keypad. The temperature control minimizes energy waste and helps the
screed achieve optimal temperature. Atlas Copco designed the F1200C to achieve optimum pre-compaction and has included hydraulic motors for the tamper and vibration in the basic and hydraulic extendable screed sections. The unit’s paving width ranges from 4 to 8 ft. (1.2 to 2.4 m), and with screed extensions, it can achieve a 10-ft. paving width and pave up to 10 in. (25.4
Atlas Copco’s compact Dynapac F1200C asphalt paver has a laying capacity of 330 tons (299 t) per hour.
cm) thick. The F1200C is less than 15 ft. (4.5 m) long and about 7 ft. (2 m) wide, making it easy for paving in narrow areas. It also can operate in areas with minimal overhead clearance, such as parking ramps, since it is less than 7 ft. tall. To maximize time between refilling, Atlas Copco incorporated a 5.5-ton (5 t) hopper into the paver. This helps increase operator productivity, especially while working in cramped worksites where refilling can be challenging. Operators can raise the hopper for tight working areas, yet still buffer a significant amount of material. Every Atlas Copco paver includes ergonomic features to
enhance operator comfort and increase productivity. The F1200C features a backrest that includes a storage compartment. The stand floor is attached with a fixed connection to the tractor and has a non-slip profile for maximum safety and comfort. Operators improve visibility around the machine by extending slideable step extensions in the floor of the operator platform. This allows operators the confidence to see around the paver increasing safety. Atlas Copco arranged the paver’s toggle switches according to function group and operational frequency, so operators can focus on paving and their surroundings. With simple control navigation, operators can ensure they drive in a straight line and improve safety on site. For example, regularly used functions, such as hopper, screed and joystick controls, are close to the driver for easy access. The F1200C offers operators stability, flexibility and fast transport speed with long tracks and powerful hydraulic motors. The paver’s hydraulics ensures that the power of the engine transmits through the tracks and directly to the ground, giving high traction force. The 66-hp hydraulic power pack allows operators to easily pave high quality asphalt mats even under difficult paving conditions like uneven surfaces. With its reliable hydraulic system and hydraulically driven fan, the F1200C offers outstanding fuel efficiency, reduced maintenance and long service intervals. The arrangement of the adjustable crawler rollers gives the machine an improved center of gravity and allow operators a comfortable ride, according to the manufacturer. Atlas Copco builds every paver with high-end components and high wear-resistant parts to give the machine a long service life. Its large side doors gives technicians easy access to components and to complete maintenance. Also, its Tier IV Final engine features a unique layout for easy access to all components to minimize servicing downtime. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 44 • July 6, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
www.mayequip.com 866-629-3784 LEXINGTON, NC
COLUMBIA, SC
RALEIGH, NC
CHARLESTON, SC
FORT MYERS, FL 239-334-3627
POMPANO BEACH PARTS, FL 954-977-9541
MIAMI, FL 305-592-5740
NEW TAMPA, FL 813-995-0841
ORLANDO, FL 407-299-1212
TAMPA PARTS, FL 813-621-4902
WEST PALM BEACH, FL 561-848-6618
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 6, 2016 • Page 45
Page 46 • July 6, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
866-430-7539
www.jfwequipment.com sales@jfwequipment.com
Serving the Asphalt Industry for 25 Years 2004 Rosco Max II distributor, 1950 gallons, EZ-2S computer, 12 ft spray bar, dsl heat, Sterling L7500 w/Cat C7 dsl eng, 6 spd trans (2007 Rosco Max 3 also avail)
POWER EQUIPMENT COMPANY
REYNOLDS-WARREN COMPANY INC
3300 Alcoa Highway Knoxville, TN 37920 (865) 577-5563
1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593
1487 Rock Springs Road Kingsport, TN 37664 (423) 349-6111 4295 Bonny Oaks Drive Chattanooga, TN 37406 (423) 894-1870 1290 Bridgestone Pkwy LaVergne, TN 37086 (615) 213-0900 3050 Ferrell Park Cove Memphis, TN 38116-3502 (901) 346-9800 1545 Highway 45 Saltillo, MS 38866 (662) 869-0283
2008 Cat CB24 double drum 47” vibratory roller, double drum drive, hydrostatic drive, Cat diesel, water system, low hrs
2005 Blaw Knox PF 3200 paver, Omni IIIA 10-18 ½ ft screed w/diesel heat, power crown and slope, Cummins diesel, power auger tunnels
RISH EQUIPMENT COMPANY www.rish.com 917 Cavalier Blvd. Chesapeake, VA 23323 (757) 485-2100 Fax: (757) 485-3616 1410 West Hundred Rd. Chester, VA 23836 (804) 748-6411
1990 Ferguson 8-12B static double drum roller, 54” drums, J.D. diesel engine, water system (2005 Bomag static roller also avail)
2010 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, Cat C7 dsl, self lubing system, power auger tunnels, front wheel assist (2008 yr model also avail)
133 Wise Mountain Rd. NW Coeburn, VA 24230 (276) 395-6901 Fax: (276) 395-3438 10214 Fayettesville Rd. Bealeton, VA 22712 (540) 439-0668 Fax: (540) 439-0719
2012 Volvo DD25W double drum 47” vibratory roller, double drum drive, hydrostatic drive, Kubota diesel, water system, 315 hrs
1999 Ingersoll Rand PT125R 9 wheel rubber tire, J.D. diesel engine, water system (2004 Ferguson rubber tire also avail)
5731 Glenmary Drive Salem, VA 24153 (540) 380-2090 Fax: (540) 380-4858 66 International Lane Suite 102 Staunton, VA 24401 (540) 887-8291 Fax: (540) 887-8295
New Marathon 250 gallon tack distributors, Honda gas eng, 5 ft spray wand w/40 ft hose, (some with spray bar also) hose reel, propane burners, flushing system (also available 115 gallon skid mount unit)
1999 Blaw Knox PF 2181 paver, Omni IA screed 8-13 ft w/diesel heat, Cummins diesel engine, new rear tires
3517 Wayne White Rd., Climax, NC 27233
TRACTOR & EQUIPMENT COMPANY 5336 Messer-Airport Hwy Birmingham, AL (205) 591-2131 3820 Greensboro Ave. Tuscaloosa, AL (205) 752-0621 2100 East I-65 Service Rd. North Mobile, AL (251) 457-8991 800 Church St. N.E. Decatur, AL (256) 355-0305 3285 Selma Highway Montgomery, AL (334) 288-6580 243 South Jackson St. Grove Hill, AL (251) 275-4158 961 Hwy 20 & Elledge Lane Tuscumbia, AL (256) 383-5666 4307 Reeves Street Highway 431 North Dothan, AL (334) 678-1832 309 Hamric Drive West Oxford, AL (256) 831-2440 150 Piper Lane Alabaster, AL (205) 621-2489 3305 Highway 77 Panama City, FL (850) 763-4654 9036 Pine Forest Rd. Pensacola, FL (850) 505-0550
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 6, 2016 • Page 47
The Best Tilt Hopper Paver Just J Got Better
Introducing the 1000G
g 8 - 13 ft LeeBoy Legend Screed System LeeBoy’s Under Auger Cut Off Gates 9” Steel Alloy Segmented Cast Augers Low Deck Configuration Hydrostatic Propulsion Controls Dual Control Stations Steel Track Drive with Automatic Adjustment
www. VT LeeBoyy,, Inc.
500 50 Lincoln County Pkwy Ext., Lincolnton, NC 28092
. com Call Ca all 704.966.3300
or
www ww ww w.LeeBoy .LeeBoyy.com
Page 48 • July 6, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Introducing the GP3, the World’s Most Intelligent Paver Announcing Our New Distributor in Arizona
info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347
COWIN EQUIPMENT CO.
Birmingham, AL 205-841-6666 205-849-0853 (Fax)
Huntsville, AL 256-350-0006 256-355-5250 (Fax)
Mobile, AL 251-633-4020 251-633-9157 (Fax)
Oxford, AL 256-832-5053 256-831-4295 (Fax)
Montgomery, AL 334-262-6642 334-834-2272 (Fax)
Pensacola, FL 850-479-3004 850-474-1602 (Fax)
TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com Forest Park, GA 404-366-0693 404-366-9688 (Fax)
Columbus, GA 706-562-1801 706-562-9897 (Fax)
Albany, GA 229-435-0982 229-435-5259 (Fax)
Calhoun, GA 706-879-6200 706-629-1134 (Fax)
Macon, GA 478-745-6891 478-745-7291 (Fax)
Pooler, GA 912-330-7500 912-330-7490 (Fax)
Hoschton, GA 706-654-9850 706-654-9856 (Fax)
Augusta, GA 706-798-7777 706-798-3237 (Fax)
Kennesaw, GA 678-354-5533 678-354-5577 (Fax)
STOWERS MACHINERY CORPORATION www.gomaco.stowerscat.com
Knoxville, TN (East) 865-546-1414
Tri-Cities, TN 423-323-0400
Knoxville, TN (West) 865-218-8800
Crossville, TN 931-484-4040
Chattanooga, TN 423-698-6943
Sevierville, TN 865-595-3750
FLAGLER CONSTRUCTION EQUIPMENT www.flaglerce.com 5151 Dr. Martin Luther King, Jr. Blvd. Ft. Myers, FL 33905 239-481-8554 239-481-3302 (Fax) 5210 Reese Road Davie, FL 33314 954-581-4744 954-583-0318 (Fax)
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 6, 2016 • Page 49
Heavy Machines, Inc.
May Heavy Equipment
www.heavymachinesinc.com Gray, TN 855/201-7453 Shreveport, LA 800/548-3458 Sorrento, LA 866/716-9307 Covington, GA 844/833-0888
www.mayequip.com Columbia, SC 866/629-3784 Charleston, SC 866/629-3784
(Soil Compaction Products Only)
JAMES RIVER EQUIPMENT Asheville, NC 28806 828/667-0176
Fayetteville, NC 910/424-1200
Charlotte, NC 28269 704/597-0211
New Bern, NC 252/638-5838
Greensboro, NC 27409 336/668-2762
Greenville, NC 252/758-4403
Mt. Gilead, NC 910/439-5653
Ahoskie, NC 252/332-5550
Raleigh, NC 919/772-2121
Wilmington, NC 910/675-9211
Reynolds-Warren Equipment Company www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 800/875-5659 404/361-1593
Page 50 • July 6, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Shuttle Buggy MTV Design Ensures Continuous Paving on Road Projects
The Roadtec SB-2500e Shuttle Buggy MTV (material transfer vehicle) can store and transfer hot-mixed asphalt material from a truck to a paver for continuous paving. Designed to “shuttle” between the asphalt haul truck and paver, the machine features an anti-segregation triple-pitch auger that remixes materials just before they are delivered to the asphalt paver at rates of up to 600 tons (544 t) per hour. The 25-ton (22.6 t) surge capacity of the SB-2500e/ex is sufficient capacity to allow trucks to fully unload material and immediately return to the asphalt plant. The triple-pitch auger flighting design used in the Roadtec Shuttle Buggy is designed to provide uniform remixing across the width of the entire hopper. The triple-pitch auger located in the bottom of the hopper remixes the contents of the storage hopper. The mixing action is designed to equalize temperatures and evenly mixes large and small particles. A slat conveyor runs from the bottom of the hopper and feeds the discharge conveyor. The machine’s front hopper features a steep slope and vibrating bottom plate in the hopper, which is designed to prevent material build-up. Heavy-duty, swiveling support casters under the hopper are said to assure smooth movement. Operators can adjust the hopper position from either of two separate control boxes. They can also adjust the position of the push roller for different truck designs. An optional windrow pickup head is available. The SB-2500e is powered by a 300 hp Tier IV, diesel
find us on
Designed to “shuttle” between the asphalt haul truck and paver, the machine features an anti-segregation triple-pitch auger that remixes materials just before they are delivered to the asphalt paver at rates of up to 600 tons (544 t) per hour.
Cummins QSL 9 engine. The Shuttle Buggy MTV rides on four 21-in. wide by 25-in. (53 by 63.5 cm) high flotation tires. The steering wheel controls the front wheels of the allwheel drive machines. The hydrostatic drive mechanism offers two speed ranges (working and travel) with continuously variable speed. For more information, visit www.roadtec.com.
Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570
South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/552-0095
Ashland, VA • 804/798-6001 Fishersville, VA • 540/337-3057 Manassas, VA • 703/631-8500 Salem, VA • 540/380-2011 Tazewell, VA • 276/596-9440 Winchester, VA • 540/667-9777 www.JamesRiverEquipment.com
(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
A corrosion-free one-gallon water tank features an easy-to-reach flow adjustment valve. To support fast refills, the tank also is easy and quick to remove, according to the manufacturer. “This product has been specifically designed to meet demand from rental companies and contractors,” said Darrell Engle, product manager, light compaction at CP. “It is an ideal
compactor for thin asphalt and small repairs on roads since the plate compactor is lightweight, fast, maneuverable and has a maintenancefree design.” Tr a n s p o r t a t i o n between job sites also has been engineered to be fast and simple. The MV 58A features a compact design and is equipped with an additional option of transport wheels. For more information, visit www.cp.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
The MV 58A forward asphalt plate compactor is the newest compaction machine from Chicago Pneumatic Construction Equipment.
www.facebook.com/linderindustrialmachinery
North Carolina Asheville • 828/681-5172 Charlotte • 704/376-7554 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031
Chicago Pneumatic Expands Its Forward Plate Compactor Lineup Contractors and rental companies now have another option for compaction of thin asphalt layers, small repairs, and road maintenance work. The MV 58A forward asphalt plate compactor is the newest compaction machine from Chicago Pneumatic Construction Equipment (CP). At only 150 lbs. (68 kg), the MV 58A is lightweight, powerful and robust. An integrated, tubeless water distribution system prevents asphalt from sticking to the plate. The machine also leaves zero tread on the asphalt. Additionally, this system eliminates regular plate and pipe cleaning to save operators time. Similar to all CP forward compaction plates, the MV 58A has a durable frame to protect crucial components. One of those components includes a 3-hp Honda engine.
Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283 www.PowerEquipCo.com
Alabama Birmingham • 205/591-2131 Alabaster • 205/621-2489 Anniston • 256/831-2440 Decatur • 256/355-0305 Dothan • 334/678-1832 Mobile • 251/457-8991 Montgomery • 334/288-6580 Shoals Area • 256/383-5666 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Atlanta • 404/366-0693 Albany • 229/435-0982 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500 www.tractor-equipment.com
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 6, 2016 • Page 51
SUSTAINABLE SOLUTIONS!
Two in One: The WR 240i from Wirtgen makes a convincing impression when it comes to soil stabilization and cold recycling. In addition to perfect ergonomics and operation, clever automatic functions and outstanding terrain accessibility, the efficient engine and powerful milling and mixing performance ensure optimal results. You too can benefit from the technology leader‘s solutions.
ROAD AND MINERAL TECHNOLOGIES
www.wirtgenamerica.com
Page 52 • July 6, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
RICHMOND MACHINERY & EQUIPMENT CO., INC. 1701 Roseneath Rd. Richmond, VA 23230 1-800-662-6485
www.tractor-equipment.com
FLORIDA Pensacola, FL 850-505-0550 Panama City, FL 850-763-4654 ALABAMA 5336 Messer Airport Hwy. Birmingham, AL 35212 205-591-2131 Fax: 205-591-8321 Grove Hill, AL 251-275-4158 Tuscumbia, AL 256-383-5666 Dothan, AL 334-678-1832 Mobile, AL 251-457-8991 Decatur, AL 256-355-0305 Alabaster, AL 205-621-2489 Tuscaloosa, AL 205-752-0621 Montgomery, AL 334-288-6580 Oxford, AL 256-831-2440
www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 800-875-5659 • 404-361-1593 Fax: 404-361-1885
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 6, 2016 • Page 53
Contact your local dealer:
COWIN EQUIPMENT CO. INC. Birmingham, AL Oxford, AL 205-841-6666 800-917-7931 Mobile, AL Pensacola, FL 251-633-4020 850-479-3004 Montgomery, AL 334-262-6642 Contact your local Huntsville / Decatur, AL dealer: 256-350-0006
Dealer Name City, ST 123.456.7890
Flagler Construction Equipment City, ST
Ft. Myers, FL Lake City, FL 123.456.7890 386-758-7444 239-481-8554 Tampa, FL Davie, FL 813-630-0077 954-581-4744 City , S T Orlando, FL (Export Parts 407-850-9614 123.456.7890 Facility): Jacksonville, FL Miami, FL 904-737-6000 305-477-2442
City, ST 123.456.7890
Dealer Name RICHMOND MACHINERY & EQUIPMENT City, ST Richmond, VA 123.456.7890 804-359-4048 800-662-6485
City, ST 123.456.7890 City, ST
ASC 123.456.7890 Construction Equipment USA, Inc. City, ST
GEORGIA Buford123.456.7890 Savannah 678-318-9500 912-964-8079 NORTH CAROLINA Dealer Name Asheville Greenville 828-687-0620 252-754-5280 Charlotte Raleigh 704-596-8283 919-661-8710 City, ST
123.456.7890 SOUTH CAROLINA
Piedmont North Charleston 864-704-1060 843-414-1120 City, ST Columbia 803-791-0740 123.456.7890
You’re serious about getting your bonus. And your crew thanks you.
TENNESSEE City, ST Chattanooga Knoxville 423-308-7940 123.456.7890 865-525-1845
Our line of pa avvers and compactors sets the standard for reliable asphalt pa aving. ving. W We e haavve a long history of prov o en technology and a reputation e for industry-leading innovation. When it comes to maximizing your earnings, these machines deliverr. See smart in action at volvoce.com/smartroads.
Page 54 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 55
F FOR OR M MORE ORE P PRODUCTIVITY, RODUCTIVITY,
G GO OG GREEN. REEN.
U TILIGUARD® UTILIGUARD
2550GR
830R/T
Utility Ut ilitty L Locating ocating S Sy System ystem
Ground G round Pe Penetrating netrating R Radar ad a r
Utility Locating System
A Accuracy. ccuracy. R Reliability. eliability. And And u unmatched nmatched c customer ustomer support suppor t a and nd service. service. We We b build uild tthese hese iinto nto e every ver y S Subsite ubsite® pr product oduct sso o you you can can get get m more ore d done, one, a and nd g get et iitt d done one rright. ight. S Safely afely and and e efficiently. fficiently. Talk T Tal alk tto o yyour our llocal ocal ® D Ditch itch W Witch itch d dealer ealer a about bout w what hat m makes akes g green reen tthe he g go-to o-to llocators ocators for for u underground nderground pr professionals. ofessionals.
DITCH WITCH OF ALABAMA Birmingham, AL | 205-663-6794 Mobile, AL | 251-653-0992 DITCH WITCH OF FLORIDA Plant City, FL | 813-704-6828 Ft. Lauderdale, FL | 954-782-3552 Jacksonville, FL | 904-269-6786 DITCH WITCH OF GEORGIA Atlanta, GA | 404-761-0619 Savannah, GA | 912-964-8228 Albany, GA | 229-435-5811
Call Y Your our Dealer Deal For A Free Demo TToday! oday! © 2016 The Charles Machine W Works, orks, Inc.
DITCH WITCH OF LOUISIANA Bossier City, LA | 318-747-0660
DITCH WITCH OF NORTH CAROLINA Garner, NC | 919-772-1214
DITCH WITCH OF SOUTH LOUISIANA Baton Rouge, LA | 225-744-7334
DITCH WITCH OF TENNESSEE Nashville, TN | 615-793-7576 Knoxville, TN | 865-970-2840
DITCH WITCH MID-SOUTH Jackson, MS | 601-939-6037 Memphis, TN | 901-850-8501
Page 54 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 55
F FOR OR M MORE ORE P PRODUCTIVITY, RODUCTIVITY,
G GO OG GREEN. REEN.
U TILIGUARD® UTILIGUARD
2550GR
830R/T
Utility Ut ilitty L Locating ocating S Sy System ystem
Ground G round Pe Penetrating netrating R Radar ad a r
Utility Locating System
A Accuracy. ccuracy. R Reliability. eliability. And And u unmatched nmatched c customer ustomer support suppor t a and nd service. service. We We b build uild tthese hese iinto nto e every ver y S Subsite ubsite® pr product oduct sso o you you can can get get m more ore d done, one, a and nd g get et iitt d done one rright. ight. S Safely afely and and e efficiently. fficiently. Talk T Tal alk tto o yyour our llocal ocal ® D Ditch itch W Witch itch d dealer ealer a about bout w what hat m makes akes g green reen tthe he g go-to o-to llocators ocators for for u underground nderground pr professionals. ofessionals.
DITCH WITCH OF ALABAMA Birmingham, AL | 205-663-6794 Mobile, AL | 251-653-0992 DITCH WITCH OF FLORIDA Plant City, FL | 813-704-6828 Ft. Lauderdale, FL | 954-782-3552 Jacksonville, FL | 904-269-6786 DITCH WITCH OF GEORGIA Atlanta, GA | 404-761-0619 Savannah, GA | 912-964-8228 Albany, GA | 229-435-5811
Call Y Your our Dealer Deal For A Free Demo TToday! oday! © 2016 The Charles Machine W Works, orks, Inc.
DITCH WITCH OF LOUISIANA Bossier City, LA | 318-747-0660
DITCH WITCH OF NORTH CAROLINA Garner, NC | 919-772-1214
DITCH WITCH OF SOUTH LOUISIANA Baton Rouge, LA | 225-744-7334
DITCH WITCH OF TENNESSEE Nashville, TN | 615-793-7576 Knoxville, TN | 865-970-2840
DITCH WITCH MID-SOUTH Jackson, MS | 601-939-6037 Memphis, TN | 901-850-8501
Page 54 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 55
F FOR OR M MORE ORE P PRODUCTIVITY, RODUCTIVITY,
G GO OG GREEN. REEN.
U TILIGUARD® UTILIGUARD
2550GR
830R/T
Utility Ut ilitty L Locating ocating S Sy System ystem
Ground G round Pe Penetrating netrating R Radar ad a r
Utility Locating System
A Accuracy. ccuracy. R Reliability. eliability. And And u unmatched nmatched c customer ustomer support suppor t a and nd service. service. We We b build uild tthese hese iinto nto e every ver y S Subsite ubsite® pr product oduct sso o you you can can get get m more ore d done, one, a and nd g get et iitt d done one rright. ight. S Safely afely and and e efficiently. fficiently. Talk T Tal alk tto o yyour our llocal ocal ® D Ditch itch W Witch itch d dealer ealer a about bout w what hat m makes akes g green reen tthe he g go-to o-to llocators ocators for for u underground nderground pr professionals. ofessionals.
DITCH WITCH OF ALABAMA Birmingham, AL | 205-663-6794 Mobile, AL | 251-653-0992 DITCH WITCH OF FLORIDA Plant City, FL | 813-704-6828 Ft. Lauderdale, FL | 954-782-3552 Jacksonville, FL | 904-269-6786 DITCH WITCH OF GEORGIA Atlanta, GA | 404-761-0619 Savannah, GA | 912-964-8228 Albany, GA | 229-435-5811
Call Y Your our Dealer Deal For A Free Demo TToday! oday! © 2016 The Charles Machine W Works, orks, Inc.
DITCH WITCH OF LOUISIANA Bossier City, LA | 318-747-0660
DITCH WITCH OF NORTH CAROLINA Garner, NC | 919-772-1214
DITCH WITCH OF SOUTH LOUISIANA Baton Rouge, LA | 225-744-7334
DITCH WITCH OF TENNESSEE Nashville, TN | 615-793-7576 Knoxville, TN | 865-970-2840
DITCH WITCH MID-SOUTH Jackson, MS | 601-939-6037 Memphis, TN | 901-850-8501
Page 58 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Komatsu America Corp. Introduces WA320-8 Wheel Loader Komatsu America Corp. introduced the WA320-8 wheel loader. Equipped with an EPA Tier IV Final certified engine, this latest addition to the wheel loader family combines high production with low fuel consumption and improved operator comfort, according to the manufacturer. The WA320-8’s parallel-lift linkage, with auto tilt-in to simulate a Z-bar, can be used in any application from pallet handling to hard digging. Fuel consumption is lower by up to three percent in V-cycle loading and two percent in load and carry applications. “The easy-to-control hydrostatic transmission makes the WA320-8 ideal for agriculture and residential applications, but its size and attachment-friendly quick coupler makes it an all-around performer for almost any worksite,” said Craig McGinnis, product marketing manager, Komatsu America. “It’s a multi-purpose utility knife on four wheels.” Standard features of the new WA320-8 include: Under The Hood/Performance Enhancements • A powerful 6.69 liter, 165 hp, EPA Tier IV Final certified, SAA6D107E-3 engine uses up to 3 percent less fuel than its Tier IV Interim predecessor. • Komatsu diesel particulate filter (KDPF) and other after treatment components are designed in conjunction with the engine for efficiency and long life. • The new SCR system reduces NOx emissions and is designed to last the life of the engine. • More than 98 percent of KDPF regeneration is performed passively, with no action required of the operator and no interference with machine operation. • Proven, fourth generation hydrostatic drivetrain with variable traction control and S-mode provides excellent traction control to reduce wheel slip. S-mode is ideal for snowy, icy or slippery conditions. • Creep mode in first gear is easily controlled via a knob on the RH console. This mode allows the operator to dial in travel speed from one to eight miles an hour. In-Cab Enhancements/Features • New, more comfortable, high-back, heated seat softens machine vibrations for operator comfort. • Pioneering KOMTRAX telematics system and monitor that provides key machine metrics, including KDPF status and DEF-level data, fuel consumption, plus performance information collected and sorted by operator ID. • Komatsu auto idle shutdown to reduce idle time and save fuel. • Auxiliary jack and two 12 volt ports. • Seven inch, LCD color monitor with ecology guidance.
The WA320-8’s parallel-lift linkage, with auto tilt-in to simulate a Z-bar, can be used in any application from pallet handling to hard digging.
• Separate full color rear view monitor standard. Additional Features/Benefits • Swing out, hydraulically-driven cooling fan, with wider fin spacing and autoreversing fan for ease of cleaning. • Gull-wing engine doors provide quick, convenient access for daily checks and service items. • Full rear fenders optional. • DEF tank features a convenient sight
glass to discourage overfilling. The WA320-8 and every other Komatsu Tier IV Final construction-sized machine, whether rented, leased or purchased, is covered by the Komatsu CARE program for the first three years or 2,000 hours, whichever comes first. Komatsu CARE includes limited scheduled factory maintenance, a 50point inspection at each service, and one complimentary Komatsu diesel particulate filter exchange in the first five years. With
select labor, fluids and filters covered by Komatsu over this period, Komatsu CARE lowers ownership costs, raises resale value and improves equipment uptime and availability. For full program details, refer to the Komatsu CARE reimbursement letter. For more information, visit www.komatsuamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 59
ONE FOCUS. COMPLETE
SOLUTIONS.
> > > > >
> > >
Page 60 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Cat Simulator Delivers Authentic Large Wheel Loader Operating Experience With technology from Simformotion LLC — a leader in heavy equipment simulator training solutions — the newly released Cat large wheel loader simulator system creates a realistic training experience for operators. Set in a quarry environment, the large wheel loader simulator system combines original controls with common machine applications to teach the same jobs performed on worksites worldwide. The system also is the first model to offer a threemonitor configuration, giving the operator a more authentic experience by increasing visibility in all directions. The addition of a motion system enhances the experience because the operator feels vibration and movement as the simulated
loader interacts with the quarry terrain. “Time after time our customers tell us that using Cat simulators as part of their training programs contributes to more proficient operators, safer practices and increased productivity,” said Renee Gorrell, vice president. “The features of the new large wheel loader simulator system enhance the training experience and enable a seamless transition from simulator to iron.” The large wheel loader simulator system includes exercises that teach control familiarization, how to perform a walkaround for safety and maintenance, driving, loading and dumping the bucket, truck loading, and dumping into the crusher. two open training modules offer opportunities for addi-
125 Wilsons Mills Rd. Extension Smithfield, NC 27577 855-562-3526 141 Brickyard Rd Lexington, SC 29072 866-262-4181 803-520-0032 www.companywrench.com
Deep South JCB
Cat simulators new large wheel loader simulator system features a three-monitor configuration that increases operator visibility in all directions.
tional practice and skill refinement. Exclusive to Cat simulators is SimU Campus train-
Soft Ride Solid Tires For Skid Steers and Wheel Loaders Extra deep lugs for traction Tough rubber compounding
Company Wrench JCB
Large in stock inventory Backhoe conversions also available
www.advancetires.com • (800) 445-6647 Mention this ad for discounted shipping
ing records management, software that measures, records and reports results of all simulation sessions. Hundreds of benchmarks based on Caterpillar expert data are included, with performance measured against these benchmarks and outcomes recorded to a database. The large wheel loader simulator system also includes companion iPad training and is available in multiple languages. In addition to the new large wheel loader simulator system, Cat simulators are available in articulated truck, M-Series motorgrader, large track type tractor, mining truck, off-highway truck, electric rope shovel, track type tractor, hydraulic excavator, small wheel loader, wheel tractorscraper, FM log loader and track feller buncher. For more information, visit www.catsimulators.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
6851 Greenwood Road Shreveport, LA 71119 318-621-9000 340 Airport Road Jackson, MS 39208 601-939-9655 761 Choctaw Drive Baton Rouge, LA 70805 225-383-6117 4201 Michoud Blvd. New Orleans, LA 70129 504-254-2700
MacKinnon JCB 2230 N US Hwy 301 Tampa, FL 33619 813-621-4671 1915 N Orange Blossom Tr Orlando, FL 32804 877-205-6098 6907 Broadway Ave Jacksonville, FL 32254 877-218-5638 2755 Marshall Dr Tifton, GA 31793 877-462-3250 5566 6th St. W. Lehigh Acres, FL 33971 239-458-5005 www.mackinnonjcb.com
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 61
SEIZE SEI ZE THE T WORKDAY W RKD WO DA AY Y Contact your loccal JCB dealer for details on n zero percent financing and cash back offers!
Don’t just survive the workday—conquer it with the two newest JCB wheel loaders that meet Tier 4 Final legislation on without a costly DPFF. Using only exhaust gas recirculation and selective catalytic reduction methods, saves you time and money on the job, reducing your overall cost of operation. The JCB 427 & 437 Wheel Loaders are two great new options for your material handling needs. To To learn more visit JCBNA.com today.
/JCBNA JCBNA
Valley JCB (a division of Valley Supply & Equipment)
8192 Euclid Ct Manassas Park, VA 20111 703-330-5579 www.valleyjcb.com
@JCBNA JCBNA www ww w.jcbna.com
JCB of Georgia
JCB of Chattanooga
JCB of Alabama
1008 E Hwy 80 Pooler, GA 31322 888-431-0130
1609 Church Rd Chattanooga, TN 37421 423-899-1219
8920 Weaver Ave Leeds, AL 35094 866-480-6125
4008 Mike Padgett Hwy Augusta, GA 30906 888-431-0130
www.jcbofchattanooga.com
791 Anderson Rd Montgomery, AL 36110 866-954-6522
www.jcbofgeorgia.com
www.jcbofalabama.com
4174
Page 62 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Modern Wheel Loaders Help Solve Age-Old Problem The age-old problem of moving large quantities of material from one place to another had plagued those in the construction industry for centuries. Enter the modern wheel loader — the industry’s most versatile workhorse. Its applications include material handling, site prep and road projects, among many others. Looking back, it’s difficult to imagine how those in the industry managed without them. Thankfully, today’s contractors have several manufacturers, sizes and add-ons to choose from, all to make their work a whole lot easier. And it all started with the advent of new farm tractors, diesel engines and bucket attachments. There were several early prototypes of the wheel loader in the 1920s, which were essentially agricultural tractors. These machines included a loader bucket, which was fastened on with wire rope through a clutch-operated winch, and then dumped by gravity
growth for Caterpillar. In 1960, Caterpillar Tractor launched its 2.75 cu. yd. (2.1 cu m) 966 model series with rigid frame. In 1963, it introduced its first articulated wheel loader the Cat 988 with 6 cu. yd. (4.5 cu m) capacity and implemented articulated steering in the 966 series with the 966B. International Harvester Hough Division entered the market in 1964 with the HD 400, which was its first articulated wheel loader. In 1965 Komatsu began production of its line of wheel loaders. In the 1970s, larger wheel loaders with articulated steering, a new type of lift arm system and comfortable cabs were available from Volvo. Other manufacturers also increased their bucket’s capacities to 20 cu. yds. (15.3 cu m), including Caterpillar, Komatsu and LeTourneau. JCB launched The 1960s was a decade of rapid its 400 series wheel loaders growth for Caterpillar. in 1973. Later, in 1986, Kawasaki Heavy Industries Ltd set the bar loader with an attachment bracket. high by developing the largest Volvo acquired AB Bolinder- wheel loader with a 25 cu. yd. (19 Munktell, and through this partner- cu m), for Japan’s Surface Mining ship BM Volvo developed the first Equipment for Coal Technology diesel engine tractor in 1952. In Research Association. 1954, Volvo adapted the engine as Today, wheel loaders are well as transmission components advanced, diverse and versatile. and a new range of tractors to cre- New electrical wheel loaders work ate the world’s first wheel loader much the same way as their diesel with attachment bracket, the H-10. and gasoline-powered counterparts It was a rear-wheel steer machine do. Attachment options such as based on a reversed tractor, pow- forks, grapples and various bucket ered by a three-cylinder diesel options mean that these machines engine with an output of 35 hp and work for any number of applicaa five-speed mechanical gearbox, tions. Hybrid models also have according to the manufacturer. become popular due to new legisThe following decade, manufac- lation and cost savings for contracturers were focused on the strength tors. As wheel loader models conand productivity of the wheel tinue to advance, contractors will loader, and other manufacturers continue to use them as the workwere making their own marks on horses of their fleets. the industry. During the 1960s, (This story also can be found manufacturers aimed to increase on Construction Equipment Earthmovers Magazine photo the payloads and size of their Guide’s website at www.constructionequipmentguide.com.) This is the JCB 413, the smallest machine in the 400 range, which featured four wheel drive and an machines. articulated frame. The 1960s was a decade of rapid CEG through a trip release mechanism. E. Boydell & Co., in Manchester, England, developed small wheel loaders in the 1930s by fastening buckets onto tractors, and invented the first bucket-mounted tractor by mounting a Muir-Hill loader cablecontrolled bucket on a 28 horsepower Fordson tractor. Following these prototypes, there were several advances in wheel loader design, including rigid frame wheel loaders and later, articulated wheel loaders. Frank G. Hough developed the first self-contained, rigid frame, two-wheel drive, rubber-tired loader called the Hough Model HS in 1939. This design included a .33 cubic yard (.25 cu m) gravity-powered bucket. The rigid frame loader design had several flaws, including lack of maneuverability. Improvements to this design led to the articulated wheel loader. World War II resulted in a
surge of technology across multiple sectors, including construction equipment. In 1953, Mixermobile Manufacturers in Portland, Ore., introduced the articulated frame — the Scoopmobile Model LD-5.
This advancement gave the operator more control and maneuverability of not only the wheel loader, but the bucket as well. The following year, the diesel engine tractor and a timely merger resulted in the first modern wheel
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 95
Page 64 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Cat Medium Wheel Loaders Feature Connect Technology Caterpillar has announced the 2016 product update to the Cat M Series medium wheel loader product line (950M, 962M, 966M, 972M, 966M XE, 972M XE, 980M and 982M). These product updates enable Caterpillar to bring new features and product improvements to market more rapidly and with greater frequency than the traditional machine development cycle. The 2016 product updates include all new Cat Connect Technologies, additional safety features and reduced operating costs. Cat Connect Technologies The new Product Link Elite system is now offered as standard equipment providing faster cellular and satellite connection capabilities. In addition, the standard machine is shipped from the factory ready to accept the Cat production measurement system. Version 1.2 of the system now indicates when the linkage is in the weighing range, allowing operators to con-
firm that an accurate scaled weight is being determined. The system also allows operators to manually activate the tip-off feature for those applications in which “auto” tipoff detection is not ideal. The updated Cat production measurement system helps the operator to more easily navigate truck and material identification lists via the monitor. The easy-tocalculate system allows the use of multiple buckets by “zeroing” up to 66.5 percent of the original calibration weight (previously less than 15 percent). In addition, the standard third-party payload interface enables third-party scale systems to be shown on the cab touch screen as well as Cat VisionLink. If the system is installed with a payload printer, the printer can be mounted using pre-drilled/tapped holes on the right front ROPS tube. The Cat object detection system is integrated into the standard display. This radar system increases the operator’s awareness of obsta-
cles up to 52 ft. (16 m) behind the machine. The system utilizes market-leading capability, speed-based zones and provides five proximitywarning levels which increase in intensity and frequency as the “stop zone” warning area approaches. Additional Safety Features New cab steps increase step durability and improve boot contact for increased safety in and out of the cab. Longer-lasting, lower power-consuming LED lights replace the auxiliary halogen-type light option providing four or eight LED work lights at the front and rear of the machine, and two in the rear hood. An optional 4-point seat belt restraint system provides increased protection from frontal collisions. Additionally, a new, easily visible, roof-mounted, seat belt indicator LED light shines green when the seat belt is buckled promoting operator safety. Optional wheel chocks are con-
veniently mounted to the front frame of the machine reducing the opportunity for the machine to roll. Furthermore, additional mounting provisions in the cab allow operators the ability to customize their machine and mount items such as a fire extinguisher or a radio. Other enhancements include: a newly designed right-hand window that makes an emergency exit from the machine faster; additional storage in the base of the cab door that does not impact visibility; repositioned grab rails that provide safe, easy entrance to the cab. Furthermore, operators can grasp a new grab handle below the membrane switch pad while driving over rough terrain or getting in and out of the seat. Reduced Operating Costs The XE models, 966M XE and 972M XE, feature a new economy mode that provides up to 4 percent improved fuel economy during general machine operation and up
The 2016 product updates include all new Cat Connect Technologies, additional safety features and reduced operating costs.
to 8 percent improved fuel economy in aggressive truck-loading applications with essentially no loss in production capability. This reduction in fuel consumption is in addition to the XE models’ basic reduction in fuel consumption, up to 25 percent, compared with comparable torque-converter-equipped models. The economy mode, enabled and disabled via the LCD touch display, automatically lowers engine speed to 1,400 rpm when full power is not required and is transparent to the operator, according to the manufacturer. The variable ground-speed limiter, previously available for only XE models, is now available for all conventional M Series medium wheel loaders. This feature allows site managers to set machine speed limits from 9 to 25 mph (15 to 40 kmh) with independent adjustments for forward and reverse. The settings are protected with the machine service-mode password. An updated touch-screen display now allows operators to select information displayed on the “quad screen,” which can simultaneously display, for example, axle oil temperatures, instant fuel rate, electrical system voltage, and temperatures for fluid in the torque converter and hydraulic system. A newly designed engine hood allows easier routine service and features a new actuator that speeds opening to approximately 35 seconds. The new impact-resistant hood exhibits greater durability during operation as well as improved cooling airflow and enhanced rearward visibility. Optional impact and corrosionresistant, hood-mounted rear roading fenders are now available on all models The newly designed, impact and corrosion-resistant front fenders provide increased coverage to protect the cab from wheel spray. Fender packages for low-profile tires which provide enhanced lateral and fore-aft stability are available for all medium wheel loader models where an additional deflector ensures 100 percent tire coverage. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 65
Contact your local dealer:
ASC CONSTRUCTION EQUIPMENT USA, INC. www.ascvolvo.com Georgia Buford Savannah
678-318-9500 912-964-8079
North Carolina Asheville Charlotte Greenville Raleigh
828-687-0620 704-596-8283 252-754-5280 919-661-8710
South Carolina North Charleston Columbia Piedmont
843-414-1120 803-791-0740 864-704-1060
Tennessee Chattanooga Knoxville
423-308-7940 865-525-1845
COwIN EQUIPMENT CO., INC. Alabama Birmingham Mobile Montgomery Madison Huntsville Oxford Florida Pensacola
800-239-2694 800-223-6755 800-239-6642 256-350-0006 800-239-7368 800-917-7931 800-239-4736 850-479-3004
FLAGLER CONSTRUCTION EQUIPMENT
Florida Ft. Myers 239-481-8554 Tampa 813-630-0077 Orlando 407-850-9614 Jacksonville 904-737-6000 Lake City 386-758-7444 Davie 954-581-4744 (Export Parts Facility): Miami 305-477-2442
MCCLUNG-LOGAN EQUIPMENT COMPANY Virginia Chesapeake Richmond Roanoke Wise Manassas Winchester
757-485-3314 804-266-0000 540-989-3750 276-328-8027 703-393-7344 540-722-3700
Some companies have you choose power or fuel efficiency. You chose both. Volvo developed the industry’s first fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus your attention on more important things — like growing your business. Get the details at volvoce.com/smartfuel.
Page 66 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
MODEL
CASE 21F XT 21F Z Bar 121F XT 121F Z Bar 221F Z Bar 221F HS 321F Z Bat 321F HS 521F 521F XT 521F XR 621F* 621F/XT 621F XR 721F 721F/XT 721F XR 821F 821F XR 921F 921F XR 1021F 1021F XR 1121F 1121F XR 1221F 1221F XR
JCB 407 409 411HT 417HT 427HT 427ZX 437HT 437ZX 457HT 457ZX
ENGINE TYPE
ENGINE POWER HP (KW)
Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Cummins Cummins
r KDI 2504 TCR JCB Diesel by Kohle r KDI 2504 TCR hle Ko JCB Diesel by ax om Ec JCB JCB Ecomax Cummins QSB6.7 Cummins QSB6.8 Cummins QSB6.9 Cummins QSB6.10 MTU 6R1000 MTU 6R1001
10,913 (4,950) 11,272 ( 5,112) 11,023 ( 4,999) 11,618 (5,269) 12,547 (5,670) 12,547 (5,670) 13,303 (6,034) 13,303 (6,034) 22,856 (10,366) 24,585 (11,151) 23,229 (10,536) 26,711 (12,116) 27,538 (12,491) 27,073 (12,280) 31,508 (14,291) 32,567 (14,668) 32,064 (14,544) 38,874 (17,633) 39,716 (18,014) 43,777 (19,857) 44,090 (19,998) 53,791 (24,399) 56,633 (25,688) 59,578 (27,024) 61,263 (27,788) 66,800 (30,299) 68,560(31,100)
55 (41) 55 (41) 60 (45) 60 (45) 70 (52) 70 (52) 70 (52) 70 (52) 131 (98) 131 (98) 131 (98) 162 (121) 162 (121) 162 (121) 178 (133) 178 (133) 178 (133) 212 (158) 212 (158) 225 (168) 225 (168) 296 (221) 296 (221) 320 (238 ) 320 (238 ) 370 (276) 370 (276)
11486 (5210) 13296 (6031) 19154 (8,688) 20779 (9,425) 29500 (13381) 30102 (13654) 32565 (14771) 33583 (15233) 44606 (20233) 43129 (19563)
64 (48) 74 (55) 108 (81) 125 (93) 146 (109) 146 (109) 160 (119) 160 (119) 258 (193) 258 (193)
JOHN DEEREYANMAR 4TNV98 204K 244K 304K 324K 344K 444K 524K 544K 624K 644K 644K Hybrid 724K 744K-II 824K-II 844K-II 944K Hybrid
OPERATING WEIGHT LBS. (KG)
YANMAR 4TNV98C YANMAR 4TNV98 YANMAR 4TNC98CT Deere 4045T werTech PSS 4045 Po ere De S 6068 Deere PowerTech PV 068H E6 ch rTe Deere Powe X 6068 Deere PowerTech PV 6090 X Deere PowerTech PS 6090 X PS ch rTe we Po Deere s 6090H Deere PowerTech Plu 6090 S Deere PowerTech PS 6135 S PS ch rTe we Po ere De S 6135 PS ch rTe we Po Deere 35 61 X PS Deere
59 (44) 64 (48) 64 (48) 70 (52) 97 (72.3) 124 (92) 141 (105) 167 (125) 186(139) 232 (173) 232 (173) 264 (197) 303 (226) 333 (248) 377 (281) 536 (400)
11,806 (5,355) 12,060 (5,470) 12,778 (5,796) 14,087 (6,390) 18,761 (8,510) 24,698 (11,203) 27,928 (12,668) 35,008 (15,879) 34,134 (15,483) 41,188 (18,682) 41,188 (18682) 48,988 (22,200) 55,905 (25,358) 59,260 (26,880) 75,413 (34,207) 117,947 (53,500)
MAX DUMP HEIGHT FT. (M)
BUCKET CAPACITY CU. YD. (CU M)
7.6 (2.3) 7.7 (2.4) 7.6 (2.3) 7.8 (2.4) 8 (2.5) 8 (2.5) 8.2 (2.5) 8.2 (2.5) 9.1 (2.8) 8.2 (2.6) 10.3 (3.1) 9.5 (2.9) 8.10 (2.7) 10.9 (3.3) 9.3 (2.8) 9.6 (2.9) 11.0 (3.4) 9.8 (3) 11.2 (3.4) 9.5 (2.9) 11.0 (3.4) 10.1 (3) 12 (3.7) 10.5 (3.2) 11.9 (3.7) 10.3 (3.1) 11.6 (3.6)
1.44 (1.10) 1.44 (1.10) 1.59 (1.22) 1.59 (1.22) 1.73 (1.32) 1.73 (1.32) 1.87 (1.43) 1.87 (1.43) 2.6 (1.99) 4.0 (3.06) 2.6 (1.99) 4.5 (3.44) 4.5 (3.44) 4.5 (3.44) 5.5 (4.21) 5.5 (4.21) 5.5 (4.21) 4.5 (3.44) 4.5 (3.44) 4.8 (3.67) 4.8 (3.67) 5.5 (4.21) 5.5 (4.21) 6.3 (4.61) 6.3 (4.61) 9.2 (7.03) 9.2 (7.03)
1.3 (1.0) 1.6 (1.2) 1.8 (1.4) 2.1 (1.6) 3.1 (2.4) 3.1 (2.4) 3.5 (2.7) 3.5 (2.7) 4.6 (3.5) 4.6 (3.5)
1.0 (0.8) 1.0 (0.8) 1.0 (0.8) 1.4 (1.1) 2.0 (1.5) 2.5 (1.9) 2.75 (2.1) 4.0 (3.1) 3.5 (2.7) 4.0 (3.1) 4.0 (3.1) 5.0 (3.8) 5.25 (4) 6.0 (4.6) 6.3 (4.8) 8.5 (6.5)
8.9 (2.72) 8.8 (2.68) 8.9 (2.72) 8.8 (2.68) 9.4 (2.87) 9.4 (2.87) 9.5 (2.9) 9.3 (2.85) 9.9 (3.02) 9.3 (2.85)
8.0 (2.4) 8.4 (2.5) 8.7 (2.6) 8.9 (2.7) 9.4 (2.9) 8.9 (2.7) 9.1 (2.8) 9.1 (2.8) 9.5 (2.9) 9.5 (2.9) 9.7 (2.9) 9.7 (2.9) 10 (3) 10.6 (3.2) 10.11(3.3) 12.4 (3.8)
.
EL LOADERS LISTINGS
VISIT WWW.CONSTRU
CTIONEQU
R COMPLETE WHE IPMENTGUIDE.COM FO
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 67
see CHART page 74
ENGINE TYPE
MODEL
CATERPILLAR Cat C4.4 ACERT 910K (LRC) 914K (LRC) 910M 914M 918M 926M 926M High Lift 930M 930M High Lift 938M 938M High Lift 950M 950M High Lift 962M 962M High Lift 966M 966M High Lift 966M XE 966M XE High Lift 972M 972M High Lift 972M XE 972M XE High Lift 980M 980M High Lift 986H 986H High Lift 982M 988K 988K High Lift 990K 990K High Lift 992K 992K High Lift 993K 993K High Lift 994K 994K High Lift
Cat C4.4 ACERT Cat C4.4 ACERT Cat C4.4 ACERT Cat C4.4 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C13 ACERT Cat C13 ACERT Cat C15 ACERT Cat C15 ACERT Cat C13 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C27 ACERT Cat C32 ACERT Cat C32 ACERT Cat C32 ACERT Cat C32 ACERT Cat 3516E Cat 3516E
NEW HOLLAND FPT W50C TC W50C ZB W80C W80C HS
TAKEUCHI TW40 TW65 SERIES 2 TW80 SERIES 2
TEREX TL65 TL80 TL100 TL120 TL160 TL210 TL260 TL310
FPT FPT FPT
Perkins / 403D-15T Deutz / TD2.9L T Deutz / TD2.9L T
ENGINE POWER HP (KW)
OPERATING WEIGHT LBS. (KG)
92 (69) 92 (69) 92 (69) 92 (69) 112 (84) 153 (114) 153 (114) 164 (122) 164 (122) 188 (140) 188 (140) 230 (172) 230 (172) 250 (186) 250 (186) 276 (206) 298 (222) 298 (222) 298 (222) 299 (223) 299 (223) 312 (233) 312 (233) 386 (288) 386 (288) 409 (305) 409 (305) 398 (297) 541 (403) 541 (403) 699 (521) 699 (521) 814 (307) 814 (307) 1,024 (764) 1,024 (764) 1,739 (1,297) 1,739 (1,297)
17,838 (8,091) 19,262 (8,737) 17,838 (8,091) 19,262 (8,737) 20,869 (9,466) 28,770 (13,050) 28,612 (12,978) 30,879 (14,006) 30,553 (13,859) 36,216 (16,427) 35,052 (15,899) 42,357 (19,213) 43,674 (19,810) 44,712 (20,281) 45,884 (20,813) 51,176 (23,213) 54,729 (24,825) 51,176 (23,213) 54,729 (24,825) 54,871 (24,889) 55,057 (24,973) 54,871 (24,889) 55,057 (24,973) 66,337 (30,090) 66,571 (30,196) 93,090 (42,225) 94,677 (42,945) 78,402 (35,563) 112,574 (51,063) 114,359 (51,872) 178,517 (80,974) 188,713 (85,599) 220,089 (99,831) 221,713 (100,567) 292,748 (132,788) 294,878 (133,754) 529,149 (240,018) 530,428 (240,598)
10,913 11,111 13,184 13,184
55 (41) 55 (41) 70 (52) 70 (52)
39.4 (29.4) 73 (54) 73 (54)
7,275 (3,300) 11,354 (5,150) 12,700 (5,760)
Deutz Deutz Deutz Deutz Perkins Cummins Perkins Cummins
50 (36.4) 61 (45) 75 (56) 101 (74.4) 101 (74.5) 162 (119) 174 (128) 200 (149)
9,040 (4,100) 10,800 (4,900) 12,787 (5,800) 15,432 (7,000) 20,280 (9,200) 27,560 (12,500) 31,750 (14,400) 38,800 (17,600)
1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 2.5 - 5.0 (1.9 - 3.8) 2.5 - 5.0 (1.9 - 3.8) 2.7 - 5.5 (2.1 - 4.2) 2.7 - 5.5 (2.1 - 4.2) 3.3 - 6.5 (2.5 - 5.0) 3.3 - 6.5 (2.5 - 5.0) ) 3.3 - 12.0 (2.5 - 9.2 ) 3.3 - 12.0 (2.5 - 9.2 ) 9.2 5 (2. .0 12 3.3 ) 3.3 - 12.0 (2.5 - 9.2 ) 3.3 - 12.0 (2.5 - 9.2 ) 3.3 - 12.0 (2.5 - 9.2 ) 9.2 5 (2. .0 12 3.3 ) 3.3 - 12.0 (2.5 - 9.2 ) 3.8 - 13.0 (2.9 - 9.9 ) 3.8 - 13.0 (2.9 - 9.9 ) 9.9 9 (2. .0 13 3.8 ) 3.8 - 13.0 (2.9 - 9.9 .2) 5.3 - 16.0 (4.1 - 12 .2) 5.3 - 16.0 (4.1 - 12 ) 7.6 4 (5. .0 10 7.0 ) 7.0 - 10.0 (5.4 - 7.6 .1) 6.0 - 15.8 (4.6 - 12 ) 8.3 - 10.0 (6.3 - 7.6 ) 7.6 3 (6. .0 10 8.3 ) 9.9 6 (8. .0 13 11.3 ) 11.3 - 13.0 (8.6 - 9.9 12.2) 14.0 - 16.0 (10.7 12.2) 14.0 - 16.0 (10.7 23.7) .2 (12 .0 16.0 - 31 23.7) 16.0 - 31.0 (12.2 24.5) 25.0 - 32.0 (19.1 24.5) .1 (19 .0 32 .0 25
1.0 (.76) 1.0 (.76) 1.4 (1.1) 1.4 (1.1)
0.66 (.5) 1.05 (.8) 1.3 (1)
) 0.65 to 1.3 (0.5 to 1.0 ) 1.0 to 1.6 (0.8 to 1.2 5) 1.5 0 (1. 3 2.0 1.31 1.8) 1.57 to 2.35 (1.2 to ) 2.0 to 3.4 (1.5 to 2.6 ) 2.6 to 4.6 (2.0 to 3.5 ) 3.3 to 5.9 (2.5 to 4.5 ) 3.9 to 8.5 (3 to 6.5
2.7 (0.8) 2.8 (0.9) 2.7 (0.8) 2.8 (0.9) 3.0 (0.9) 3.3 (1.0) 4.0 (1.2) 3.3 (1.0) 4.4 (1.3) 3.6 (1.1) 4.5 (1.4) 4.7 (1.4) 4.8 (1.5) 4.7 (1.4) 4.8 (1.5) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.8 (1.5) 4.8 (1.5) 6.6 (2.0) 6.2 (1.9) 5.1 (1.6) 6.8 (2.1) 7.0 (2.1) 7.2 (2.2) 8.5 (2.6) 7.8 (2.4) 7.3 (2.2) 8.5 (2.6) 8.9 (2.7) 9.3 (2.8) 8.8 (2.7)
7.8 (2.4) 8 (2.4) 8.9 (2.7) 8.9 (2.7)
7.06 (2,150) 8.1 (2,465) 8.6 (2,605)
8.2 (2.52) 8.3 (2.55) 8.6 (2.64) 9 (2.75) 9.6 (2.93) 9.11 (3.01) 9.3 (2.85) 10.1 (3.07)
.
EL LOADERS LISTINGS
R COMPLETE WHE IPMENTGUIDE.COM FO
CTIONEQU
VISIT WWW.CONSTRU
MAX DUMP HEIGHT FT. (M)
BUCKET CAPACITY CU. YD. (CU M)
Page 68 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Liebherr XPower Wheel Loaders Represent Milestone The latest XPower large wheel loaders with emission Stage IV / Tier 4f represent a milestone in the technological history of Liebherr wheel loaders. Due to the wide range of innovations, such as the power-split driveline installed as standard, Liebherr has subjected its new wheel loader generation to much tougher, more thorough and more extensive testing than ever before. Important main components, such as the XPower driveline and the larger axles, were found to be particularly durable in testing over 70,000 operating hours. The load program in the test phases included traditional back loading as well as customer-specific special operations. Liebherr deployed the XPower test wheel loaders in various quarries, recycling businesses and sawmills. The machines also have been involved in loading slag in a steel plant and coal in a harbor. The positive test results demonstrate that the efforts made by Liebherr to combine fuel efficiency, high performance, durability and comfort in a single wheel loader have achieved their goal over the long term, according to the manufacturer. Unique Efficiency Due to PowerSplit XPower Driveline Liebherr is installing the power-split XPower driveline as standard in its large wheel loader series. This ensures power and efficiency in the new Liebherr large wheel loaders. The XPower power-split transmission performs the same function as the traditional power-split transmission but with a greater level of efficiency. It combines two types of drive: the hydrostatic drive, the most efficient drive in short loading cycles, and the mechanical drive for long distances and driving up gradients. The power-split transmission manages the interaction of the two drive types. It is adjustable and continuously adapts the mixing ratio of the two drive paths without noticeable switching and without interrupting traction power. In this way the power of the wheel loader adapts to the specific requirements of the particular task. A greater hydrostatic element comes into effect during starting and loading and a greater mechanical element is applied when travelling at higher speeds. Together, the two paths always transfer 100 percent of the diesel engine power and only the mix ratio of the two paths changes. With its innovative and efficient drive concepts, Liebherr has achieved a high level of efficiency in all areas where wheel loaders are used. The Liebherr-Power-Efficiency system (LPE) plays a key role in this. Over a test and development phase lasting several years, Liebherr worked continually to perfect the adaptation of all drive-train components. The result is that XPower wheel loaders reduce fuel consumption by up to 30 percent enabling operators to reduce their oper-
ating costs, according to the manufacturer. High Fuel Efficiency Rehandling a wide range of materials is one of the basic tasks for a wheel loader. This is why Liebherr-Werk Bischofshofen GmbH tested several machines in rehandling tasks. For example, a gravel and crushed stone plant tested an L 580 XPower with Z-bar linkage and 7.4 cu yd. (5.7 cu m) bucket. The wet raw material, which the company extracts from a lake using a bucket chain, proved to be a particular challenge. With the strengthened Z lift arms providing up to 20 percent more break-out force, the machine operators lifted the wet material without a problem, and the optimized bucket design offered improved penetration action for the task. The responsiveness of the XPower driveline was impressive when the loading route had an uphill gradient. The machine operator praised the quiet, comfortable handling and the agility of the wheel loader. At approximately 4 gal. (15 L) of diesel per operating hour, the L 580 XPower consumes around 1.3 gal. less than another machine undertaking similar activities in the gravel and crushed stone plant, according to the manufacturer. An L 566 XPower loaded approximately 1,653 ton (1,500 t) of bulk material in a building materials recycling park. The wheel loader coped with the distances across the large site, which were generally much greater. In doing so, the wheel loader consumed between 3.7 and 4.7 gal. (14 and 18 L) of diesel. The machine operator was pleased with the level of performance and the comfort. As a senior employee at the recycling park commented, “The thrust force and acceleration of the L 566 XPower are excellent. The machine is very responsive, but still runs quietly. The large cab is particularly comfortable. The driver’s seat is great. I can adjust the steering wheel in three ways and the control elements are arranged so that all the information is available at a glance.” L 586 XPower Takes Part in an Extended Term Over 13,700 Operating Hours The new large wheel loaders have proved their stability during intensive long-term testing. An L 586 XPower with Z-bar linkage was the front-runner in the endurance test, reliably performing its task of transporting wood chips into a silo for 13,700 operating hours. An L 586 XPower was selected because the thrust force and break-out force — the key requirements for this specific task — were ideally suited, in proportion to the operating weight, to the site requirements. The L 586 XPower also had a 18 cu. yd. (14.0 cu m) light material bucket, which the machine operator was able to use on each
cycle to move large volumes of wood chips. The machine was operating almost constantly under a full load. Despite this, fuel consumption remained low due to the power-split XPower driveline. The test wheel loader required 5.3 gal. (20 L) of diesel per operating hour for the powerintensive task. This equates to a fuel saving of around 30 percent when compared with the already very economical Stage IIIA / Tier III L 586 wheel loader normally used to transport the wood chips. Operations under a full load are where Liebherr customers benefit from the power deployment provided by the interaction of the mechanical and hydrostatic drive paths in the new XPower driveline. The load is divided across the two drive paths and the components have a significantly longer life as a result. Machine operators can work more efficiently and safely with minimal downtime. Full Power at the Quarry Face: Quarry Test for the L 586 XPower An L 586 XPower, fitted with a 7.2 cu. yd. (5.5 cu m) rock bucket with Liebherr tooth system, was tested in the quarrying industry by an international cement manufacturer that used it for extraction. Other standard quarrying equipment options, such as a foldable grill for the windscreen, were included on the machine to prepare it for its work at the rock face. The challenging test operation featured routes of up to 1,312 ft. (400 m) and inclines of up to 30 percent. The benefits of the power-split driveline really came into effect under these conditions. The combination of the hydrostatic and mechanical drive ensures that the wheel loader works efficiently on all operations, even on long routes and up hills. The L 586 XPower proved this to be the case in this special quarrying task. Despite the enormous load, the test loader only used around 5.8 gal. (22 L) of diesel per operating hour. The Toughest Conditions: Robust XPower Wheel Loaders Working With Steel and Coal An L 586 XPower fitted with a 5.9 cu. yd. (4.5 cu m) high-dump bucket, comprehensively reinforced tires and tire chains completed a tough test operation. The wheel loader took on the task of removing solidified steel slag at a steel plant. The L 586 XPower broke into the heavy, bulky and dusty metal slag with full power. The heavy tire chains, which weighed over 3.8 ton (3.5 t), provided the necessary traction. Under this extreme load, the robust axles and the powerful Z lift arm were found to be very durable. The L 586 XPower was in operation for a total of 9,000 hours in the steel works without any damage to the main compo-
nents. Liebherr exposed other test wheel loaders to tough conditions. At a harbor terminal, a L 586 XPower loaded coal using a 13 cu. yd. (10.0 cu m) bucket. One of the challenges in this load-and-carry operation was to spread the partially-wet coal. The Liebherr test wheel loader completed its task reliably for over 7,000 operating hours with minimal fuel consumption. During the test, the L 586 XPower used between 2 and 2.6 gal. (8 and 10 L) less diesel per operating hour than its predecessor, which normally operates in the harbor. Versatile XPower Wheel Loaders Impress in Industrial Applications Liebherr-Werk Bischofshofen GmbH tested the new wheel loader generation in various industrial applications including working in a paper factory. Here the test machine was an L 556 XPower with industrial lift arm, 7.8 cu. yd. (6.0 cu m) light material bucket with undercut blade and numerous Liebherr factory-fitted options, including a coarse meshed cooler net and a lint filter to reduce contamination of the cooling system with dust particles. The test showed that the new Liebherr SCR technology increased operational safety. This simple and extremely effective system for the after-treatment of exhaust gases means that regeneration is no longer necessary and fire risk is reduced to a minimum. This is a significant safety feature in dustintensive environments such as indoor operation in the paper factory. Another L 556 XPower with industrial lift arm worked in aluminium scrap recycling. As part of the test’s 3,500 operating hours, several machine operators worked in a threeshift operation with two different attachment tools, which they changed with the aid of a hydraulic quick hitch. As with the paper factory, the space was confined but, due to the compact design of the XPower wheel loader, the machine operators were able to maneuver efficiently and perform very well in handling. Liebherr-Werk Bischofshofen GmbH deployed other wheel loaders in recycling tasks. An L 556 XPower worked in the disposal of slag waste. For this heavy material, which placed considerable demands on the wheel loader, the test customer used a 5.2 cu. yd. (4.0 cu m) high-dump bucket with undercut blade. The robust wheel loader loaded material, formed heaps and fed crushers for a total of 5,000 operating hours over a two-shift operation. For more information, visit www.liebherr.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 69
Page 70 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
JCB Boosts Mid-Range Wheel Loader Comfort, Visibility JCB is upgrading its mid-range wheel loader range, introducing the proven DNA from its range-topping 457 wheel loader to the 427 and 437 models, along with the smaller 411 and 417 loaders. Key features include: • JCB’s CommandPlus cab delivers class-leading comfort and visibility • Innovative CommandPlus Control system • Tier IV Final/Stage IV compliant engines with no costly diesel particulate filter • Single-piece hood for improved service access • Range of loader arms to suit various industry applications • Optional Wastemaster package available Clean Performance JCB’s new 411 and 417 wheel loaders are powered by the company’s own EcoMAX Tier IV Final/Stage IV compliant diesel engines, delivering 108 hp (81 kW) in the 411 and a powerful 125 hp (108 kW) in the 417. The larger 427 and 437 loaders operate with a Tier IV Final/Stage IV Cummins diesel engine, offering 179 hp (133 kW) and 183 hp (136 kW) respectively. In line with JCB’s overall emissions policy, both of these engines meet the latest emissions standards without the use of a costly diesel particulate filter (DPF), reducing operating costs and complexity for the customer. All Tier IV Final wheel loaders now feature a single-piece engine hood that can be electrically or manually raised to provide improved service access to the engine and cooling pack. The machines drive through automatic powershift transmissions for maximum productivity and efficiency. All four machines feature fine mesh front grills to trap larger particles before the air enters a cyclonic pre-filter. The engine-cooling fan provides a cyclonic scavenge system to remove dust particles from the pre-cleaner, rather than using hotter exhaust gases to deliver the cyclonic action. Wide core cooling packs reduce dust accumulation, cutting the downtime required to blow out radiator cores. The single-piece hood also helps to provide a seal around the engine bay, cutting dust and dirt ingress. A reversible cooling fan is available as an option. Operator Comfort All four of the new wheel loaders will use the JCB CommandPlus cab, first seen last year on the larger 457. This totally new ROPS structure has A pillars that have been moved out to the same width as the rear of the cab, providing a larger interior with a panoramic front windshield. The machines feature JCB’s command driving position with revised pedals, an adjustable steering column and seatmounted hydraulic controls. Switches and auxiliary controls have been repositioned on the right-hand A pillar, providing the operator with a simplified interior and easy access to all machine controls. The loaders have full-color LCD screens that incorporate access to the loader’s operating menus and act as a monitor for a rear view camera. JCB’s CommandPlus Control system allows the operator to adjust auxiliary flow rates on the main screen. It also is possible to use the monitor to adjust SRS boom suspension engagement speeds where fitted and the timing of cooling fan reversal to clean out the cooling pack cores. The screen also offers an operator help system that lists switch functions if required.
JCB’s 417, 427 and 437 wheel loaders have been upgraded with features found on the company’s range-topping 457 wheel loader model.
The cab benefits from increased internal space, as the heating, ventilation and air conditioning system has been repositioned outside the main cab structure. This provides additional storage for the operator, both behind the seat and in pockets in the front and side consoles. The new cab, in combination with on-demand cooling fans and the Tier IV Final engines contribute to a cut in noise and vibration, reducing operator fatigue and boosting productivity, according to the manufacturer. Operators benefit from a range of seat and control options, with electro-hydraulic proportional auxiliary controls now fitted as standard. An electric parking brake is standard on the 427 and 437 and available as an option on the smaller models. The exhaust silencers, and air pre-cleaners are all situated below the hood to provide maximum visibility for the operator.
Job-Specific Design The 411 and 417 loaders come standard with HT loader arms for easy load handling and improved tool-carrier performance. The loader arms are available in parallel- and nonparallel lift for ultimate shovel-handling characteristics. Bucket capacity is 50 cu. ft. (1.4 cu m) for the 411 and 60 cu. ft. (1.7 cu m) for the 417. The larger models can be ordered with a choice of HT or power ZX loader arms, in a range of lengths to suit every industry application. The 427 operates with a 85 cu. ft. (2.4 cu m) bucket while the 437 is equipped with a larger 95 cu. ft. (2.7 cu m) shovel. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 71
YOUR IDEAS.
BROUGHT TO THE SURFACE.
Building your aggregate business together. With input from loader users like you, our K-II Series Loaders are beefed up and back for more. Larger, higher-capacity axles with standard axle coolers DQG Æ&#x;OWUDWLRQ SURYLGH KHDY \ GXW\ RQ WKH Æ \ GLIIHUHQWLDO ORFNV IRU WUDFWLRQ RQ WRXJK WHUUDLQ )LQDO 7LHU HQJLQHV XVH KLJK XSWLPH H[KDXVW Æ&#x;OWHUV DQG VHOHFWLYH FDWDO\WLF UHGXFWLRQ 6&5 WR PHHW HPLVVLRQV UHJXODWLRQV ZLWK QR ORVV RI SRZHU RU HIÆ&#x;FLHQF\ $QG GDWD IURP WKH RSWLRQDO / SD\ORDG VFDOH FDQ EH YLHZHG UHPRWHO\ LQ -'/LQNÆ€ ,WŤV DOO EDFNHG E\ 8OWLPDWH 8SWLPH IHDWXULQJ -RKQ 'HHUH :RUN6LJKWÆ€ RXU FXVWRPL]DEOH VXSSRUW VROXWLRQ /HDUQ PRUH IURP \RXU GHDOHU RU YLVLW RXU ZHEVLWH
FLINT Construction & Forestry Division Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Braselton, GA 770/965-1889 Macon, GA 478/788-1586 Adairsville, GA 770/773-9857 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370
Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Aynor, SC 843/358-5688 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420
JAMES RIVER EQUIPMENT
, ,
www.jamesriverequipment.com , ,
Ashland, VA 804/798-6001 Manassas, VA 703/631-8500 Winchester, VA 540/667-9777 Tazewell, VA 276/596-9440 Fishersville, VA 540/337-3057 Salem, VA 540/380-2011 Asheville, NC 828/667-0176 Charlotte, NC 704/597-0211
Greensboro, NC 336/668-2762 Mt. Gilead, NC 910/439-5653 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Wilmington, NC 910/675-9211 Fayetteville, NC 910/424-1200
u COASTAL EQUIPMENTMo a www.coastalequipment.net
o
e
Virginia Beach, VA 757/424-1900 Yorktown, VA 757/898-1900
9
, NORTRAX 4
Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Miami, FL 305/592-5740 Orlando, FL 407/299-1212 Pompano Beach, FL 954/977-9541 Riverview, FL 813/621-4902 West Palm Beach, FL 561/848-6618
www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 LaVergne, TN (Nashville) 615/501-8600
Page 72 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
John Deere 944K Proves Efficient Solution for Quarries The John Deere 944K hybrid wheel loader is bolstering bottom lines by offering maximized productivity and efficiency through its hybrid-electric drive system designed to lower daily operating costs. Coupled with a 536 hp, PowerTech EPA Interim Tier IV engine (IT4), the 944K hybrid wheel loader can provide significant fuel savings over 9-cu. yd. (6.9 cu m) loaders with conventional drivetrains. The production-class wheel loader’s brushless AC generators and motors, water-cooled brake resistors and solid-state power electronics deliver reliable, long-term performance to quarry and large-load applications, according to the manufacturer. “Today’s wheel loaders demand increased uptime and reliability, and our customers asked for a solution that offers much more,” said John Chesterman, product marketing manager, production class four-wheel drive loaders, John Deere Construction & Forestry. “The highly fuel-efficient 944K hybrid wheel loader delivers quick, smooth and responsive hydraulics, and four modular, independent wheel drives with electronic traction control that provide customers with a complete loader solution built to last through the most rugged conditions.” The 944K’s hybrid-electric drive recaptures energy while slowing the loader when the operator lets off the accelerator, lessening the load on the engine and further reducing fuel consumption. During operation, the engine can run in a limited speed range of 1,200 to 1,800 rpm for maximum fuel efficiency in normal mode or can run at constant speed so boom and bucket functions are powerful, responsive and quick in performance mode. Offering strong pushing power and quick ramp-climbing ability, the 944K hybrid wheel loader helps operators maintain stockpiles and heap hoppers in quarry operations and other production facilities through its bucket width of 12 ft. (3.6 m) and breakout force of 103,388 lbs. No transmission shifting or clutches to engage enable smooth reversals and less spillage. The 944K hybrid wheel loader offers standard traction control that automatically limits torque to any wheel when slippage occurs, increasing machine traction in poor underfoot conditions. With enhanced rimpull control, the loader prevents tire spin and slicing. The 944K also offers coast control to reduce service-brake wear and features such functions as dynamic braking in a hydrostatic transmission, slowing the loader and helping reduce service-brake component wear. Inside the cab, the loader is quieter than other machines on the market. At only 108 decibels, noise is much less noticeable to bystanders, and cab noise is only 72 decibels for the operator. With the largest loader cab
offered by Deere, the 944K offers a commanding view to the bucket, tires and ground hazards through floor-to-ceiling front glass. The machine’s joystick steering delivers smooth, low-effort control for fatigue-beating comfort, according to the manufacturer. “We brought in the 944K hybrid wheel loader to our remote quarry location, and, so far, the uptime has been great,” said Jeff Bremer, MBA, area equipment manager, Cornejo & Sons. “One of the most exciting
things about deploying the 944K is the fuel savings. With the 944K, we’re able to reach the same production as our old machine, and we achieve the same efficiency with less fuel burn, so it actually costs us less. We have really high expectations for our equipment, and John Deere has met our expectations.” Customers looking to get the most out of their 944K hybrid wheel loader can rely on their John Deere dealers to provide Ultimate Uptime featuring John Deere WorkSight. With Ultimate Uptime, owners receive pre-
delivery and follow-up inspections; five years of JDLink Ultimate telematics, machine health prognostics and remote diagnostics, and programming capability; and the ability to add dealer-provided uptime solutions to customize the package to individual needs. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
The 944K’s hybrid-electric drive recaptures energy while slowing the loader when the operator lets off the accelerator, lessening the load on the engine and further reducing fuel consumption.
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 73
RISH EQUIPMENT COMPANY www.rish.com Bluefield, WV • 304/327-5124 Chesapeake, VA • 757/485-2100 Chester, VA • 804/748-6411 Coeburn, VA • 276/395-6901 Opal, VA • 540/439-0668 Salem, VA • 540/380-2090 Staunton, VA • 540/887-8291
POWER EQUIPMENT www.powerequipco.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283
LINDER INDUSTRIAL MACHINERY www.linderco.com find us on www.facebook.com/linderindustrialmachinery
Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570 North Carolina Asheville • 828/681-5172 Charlotte • 704/376-7554 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031 South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/552-0095
MY CUSTOMERS LOVE KOMATSU! P
TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Mobile • 251/457-8991 Montgomery • 334/288-6580 Shoals Area • 256/383-5666 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500
SUPPORTED WITH PRIDE
Page 74 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
CHART from page 67
MODEL
ENGINE TYPE
CORE DOOSAN INFRA ns DL200-5 DL220-5 DL250-5 DL300-5 DL350-5 DL420-5 DL450-5 DL550-5 DL200TC-5 DL250TC-5 DL200HL-5 DL220HL-5 DL250HL-5 DL300HL-5 DL350HL-5 DL420HL-5 DL450HL-5 DL550HL-5
HYUNDAI HL730-9 HL730-9A HL740-9 HL740-9A HL757-9 HL757-9A HL760-9 HL760-9A HL760-9A WH HL770-9 HL770-9A HL780-9 HL780-9A
Perki Doosan Doosan Scania Scania Scania Scania Scania Perkins Doosan Perkins Doosan Doosan Scania Scania Scania Scania Scania
Cummins QSB4.5 Cummins QSB4.5 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSL Cummins QSL9 Cummins QSM11 Cummins QSX11.9
KAWASAKI-KKuCboM ta V2403-MDI 42ZV-2 45ZV-2 135ZV-2 60Z7 62Z7 67Z7 67TM7 70Z7 70TM7 80Z7 80Z7 T4F 85Z7 90Z7 T4F 95Z7 95Z7XT 115Z7 115Z7XT
I Kubota V3307-DI-T Cummins QST30 Deutz TCD36 Isuzu 4HK1 Isuzu 4HK1 Isuzu 4HK1 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSL9 Isuzu 6HK1 Cummins QSL9 Isuzu 6WG1 Isuzu 6WG1 Isuzu 6WG1 Isuzu 6WG1
OPERATING WEIGHT LBS. (KG)
ENGINE POWER HP (KW) TC: tool carrier
HL: high lift
mpliant. chines are Tier 4 co Note: All "dash-5" ma (2.89)
25,794 (11,700) 27,381 (12,419) 30,115 (13,660) 41,844 (18,980) 43,541 (19,750) 50,783 (23,035) 56,868 (25,795) 69,897 (31,705) 26,224 (11,895) 31,115 (14,113) 26,566 (12,050) 28,296 (12,834) 31,130 (14,120) 42,869 (19,445) 44,743 (20,295) 51,919 (23,550) 57,618 (26,135) 71,617 (32,485)
142 (106) 160 (119) 172 (128) 271 (202) 271 (202) 345 (257) 345 (257) 380 (283) 142 (106) 172 (128) 142 (106) 160 (119) 172 (128) 271 (202) 271 (202) 345 (257) 345 (257) 380 (283)
21,600 (9 800) 23,149 (10 500) 26,460 (12 000) 28,000 (12 700) 32,000 (14 500) 32,400 (14 700) 39,460 (17 900) 40,450 (18 350) 40,450 (18 350) 50,930 (23 100) 51,810 (23 500) 66,100 (30 000) 66,800 (30 300)
123 (91.7) 128 (95.4) 143 (106.6) 156 (116.3) 170 (126.8) 197 (146.9) 212 (158.1) 222 (165.5) 222 (165.5) 277 (206.6) 297 (221.4) 344 (256.5) 351 (261.7)
9,250 (4,195) 12,220 (5,540) 180,290 (81,780) 17,900 (8,120) 24,380 (11,060) 26,410 (11,980) 28,065 (12,730) 31,610 (14,340) 35,350 (16,170) 38,540 (17,480) 38,910 (17,650) 45,560 (20,670) 53,310 (24,180) 75,790 (34,380) 79,080 (35,870) 104,230 (47,280) 106,110 (48,130)
45 (34) 61 (45) 720 (537) 95 (71) 152 (113) 152 (113) 152 (113) 168 (125) 168 (125) 193 (145) 193 (144) 243 (181) 275 (205) 388 (289) 388 (289) 531 (396) 531 (396)
MAX DUMP HEIGHT FT. (M)
BUCKET CAPACITY CU. YD. (CU M)
2.6 (2.0) 3.0 (2.3) 3.2 (2.5) 4.2 (3.2) 4.8 (3.7) 5.5 (4.2) 6.3 (4.8) 7.5 (5.7) 2.6 (2.0) 3.4 (2.6) 2.6 (2.0) 2.6 (2.0) 3.4 (2.6) 4.2 (3.2) 4.8 (3.7) 5.5 (4.2) 6.3 (4.8) 7.5 (5.7)
2.5 (1.9) 2.5 (1.9) 3.0 (2.3) 3.0 (2.3) 3.7 (2.8) 3.7 (2.8) 4.3 (3.3) 4.3 (3.3) 4.3 (3.3) 5.5 (4.2) 5.5 (4.2) 7.1 (5.4) 7.1 (5.4)
) 0.78 to 1.0 (0.6 to .76 ) .90 to 6 (.7 1.0 to 1.18 .3) 10 to 25 (8. .5 13 to 10.8 ) 1.8 to 5 (1. 2.0 to 2.4 ) 2.8 to 3.1 (2.1 to 2.4 ) 2.7 to 4 (2. 3.1 to 3.5 ) 2.8 - 3.1 (2.1 to 2.4 ) 3.3 to 4.2 (2.5 to 3.2 ) 3.4 - 3.7 (2.6 to 2.8 ) 3.5 to 4.7 (2.7 to 3.6 ) 3.6 to 7 (2. 4.7 to 3.5 ) 4.0 to 3 (3. 4.3 to 5.2 ) 4.9 to 6.1 (3.7 to 4.7 ) 6.2 to 7 (4. 6.2 to 8.1 ) 9.0 to 9.8 (6.9 to 7.5 ) 6.9 to 6 (5. 7.3 to 9.0 9.15 (7.0)
9.5 9.3 (2.85) 9.2 (2.79) 9.3 (2.85) 10 (3.04) 10.1 (3.07) 10.7 (3.24) 11.2 (3.41) 8.8 (2.69) 9.0 (2.74) 10.9 (3.29) 10.7 (3.25) 10.7 (3.25) 11.2 (3.40) 11.7 (3.59) 11.7 (3.59) 12.3 (3.73) 12.6 (3.83)
8.10 (2.7) 8.10 (2.7) 9.2 (2.8) 9.2 (2.8) 9.4 (2.85) 9.4 (2.85) 9.9 (3.0) 9.9 (3.0) 9.9 (3.0) 10.2 (3.1) 10.2 (3.1) 10.10 (3.3) 10.10 (3.3)
10.3 (3.1) 10.3 (3.1) 19.8 (6.0) 11.6 (3.6) 12.5 (3.8) 12.6 (3.8) 13 (4.0) 12.8 (3.9) 13.5 (4.1) 13.4 (4.1) 13.4 (4.1) 14.0 (4.3) 14.5 (4.4) 15.2 (4.9) 14.5 (4.4) 16.5 (5.1) 15.9 (4.9)a
.
EL LOADERS LISTINGS
VISIT WWW.CONSTRU
CTIONEQU
R COMPLETE WHE IPMENTGUIDE.COM FO
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 75
ENGINE TYPE
MODEL
OPERATING WEIGHT LBS. (KG)
ENGINE POWER HP (KW) P= Parallel Linkage
LIEBHERR L 524 Z L 524 P L 528 Z L 528 P L 538 Z L 538 P L 542 Z L 542 P L 550 Z L 550 Ind. L 556 Z L 556 Ind. L 566 Z L566 Ind. L 580 Z L 580 Ind. L 586 Z
G LIUGGIOII N Z-bar CLG816 CLG835III Z-bar CLG835III TC CLG842III Z-bar CLG842III TC CLG856III Z-bar CLG877III CLG888III
KOMATSU WA200-7 WA270-8 WA320-8 WA380-8 WA470-8 WA500-8 WA600-8 WA800-3 WA900-3 WA1200-6
VOLVO L20F L30G L35G L45G L50G L350F L110H L120H L150H L180H L220H L250H L60H L70H L90H
4045HFL92 4045HFL92 4045HFL93 4045HFL93 4045HFL93 4045HFL93 4045HFL93 4045HFL93 Liebherr D 934 A7 Liebherr D 934 A7 Liebherr D 934 A7 Liebherr D 934 A7 Liebherr D 936 A7 Liebherr D 936 A7 Liebherr D 936 A7 Liebherr D 936 A7 Liebherr D 936L A6
Yanmar 4TNV98 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSM11 Cummins QSM11
SAA4D107E-2 SAA6D107E-3 SAA6D107E-3 SAA6D107E-3 SAA6D125E-7 SAA6D140E-7 SAA6D170E-7 SAA12V140E-3 SAA12V140E-3 SDA16V160E-2
Volvo D3.6D Volvo D3.3D Volvo D3.3D Volvo D4H Volvo D4H Volvo D16E LA E3 D8J D8J D13J D13J D13J D13J D6J D6J D6J
BUCKET CAPACITY CU. YD. (CU M)
ge Ind.= Industrial Linka
Z= Z Linkage
22,930 (10,400) 25,355 (11,500) 24,030 (10,900) 27,115 (12,300) 28,220 (12,800) 29,500 (13,380) 29,540 (13,400) 30,425 (13,800) 38,140 (17,300) 39,350 (17,848) 39,460 (17,900) 40,895 (18,550) 51,035 (23,149) 53,240 (24,149) 55,510 (25,178) 57,450 (26,060) 69,996 (31,749)
121 (90) 121 (90) 134 (100) 134 (100) 154 (115) 154 (115) 161 (120) 161 (120) 173 (129) 173 (129) 188 (140) 188 (140) 255 (190) 255 (190) 288 (215) 288 (215) 335 (250)
12,340 (5,597) 28,440 (12,900) 29,983 (13,600) 33,601 (15,241) 34,923 (15,840) 40,680 (18,452) 56,438 (25,599) 66,139 (30,000)
67 (50) 160 (119) 160 (119) 193 (144) 193 (144) 220 (164) 290 (216) 335 (250)
126 (94) 149 (111) 165 (123) 191 (142) 272 (203) 353 (263) 529 (395) 808 (603) 856 (638) 1,765 (1,316)
,430 - 11,825) 25,199 - 26,070 (11 5 kg - 13,190) ,79 (12 9 28,208 - 29,07 0 - 15,870) ,48 (15 34,128 - 34,987 385 - 19020) (18 2 ,93 40 2 ,53 40 ,200 - 25,210) 53,352 - 55,579 (24 ,880 - 35,315) (34 6 ,85 76,897 - 77 ,400 - 57,460) (55 122,136 - 126,678 1,900 - 104,500) (10 80 0,3 23 50 224,6 ) (107,200 - 107,350 236,340 - 236,670 220,550) 09 6,4 (21 50 6,2 477,100 - 48
9,945 (4,511) 12,125 (5,500) 13,779 (6,250) 19,070 (8,650) 20,790 (9,410) 110,530 (50,136) 40,920 (18,561) 42,830 (19,427) 55,320 (25,093) 61,890 (28,073) 70,440 (31,951) 76,544 (34,720) 25,900 (11,748) 29,200 (13,245) 32,220 (14,615)
50 (37) 71 (53) 71 (53) 98 (73) 114 (85) 528 (394) 258 192) 276 (206) 300 (224) 333 (248) 371 (277) 389 (290) 165 (1231) 170 (127) 184 (137)
2.7 (2.0) 2.4 (1.8) 3.0 (2.2) 2.7 (2.0) 3.4 (2.4) 3.0 (2.3) 3.7 (2.8) 3.3 (2.5) 4.2 (3.2) 3.9 (3.0) 4.7 (3.6) 4.3 (3.3) 5.2 (3.9) 4.6 (3.5) 6.5 (5.0) 5.9 (4.5) 7.9 (6.0)
1 (.7) 2.5 (1.9) 2.5 (1.9) 3.5 (2.7) 3 (2.3) 4.5 (3.4) 5.5 (4.2) 6.8 (5.2)
2.2 - 3.1 (1.7 - 2.4) 2.5 - 3.5 (1.9 - 2.7) 3.0 - 4.2 (2.8 - 3.2) 3.5 - 4.3 (2.7 - 3.3) 5.0 - 5.8 (3.8 - 4.4) 5.9 - 8.2 (5.2 - 6.3) ) 8.4 - 10.2 (6.4 - 7.8 14.0) 13.1 - 18.3 (10.0 .0) 15.0 - 17.0 (11.5 - 13 35.0) .0 (18 .8 45 .5 23
0.9 - 1.4 (.68 - 1.1) 1.2 - 2.0 (.92 - 1.5) 1.3 - 2.0 (.99 - 1.5) 2.0 (1.5) 1.8 - 3.0 (1.4 - 2.3) .7) 8.1 - 16.6 (6.2 - 12 ) 3.2 - 12.4 (2.4 - 9.5 ) 3.2 - 12.4 (2.4 - 9.5 ) 3.5 - 12.4 (2.7 - 9.5 ) 9.5 7 (2. .4 12 3.5 ) 3.5 - 12.4 (2.7 - 9.5 .2) 6.7 - 13.3 (5.1 - 10 2.1 - 6.5 (1.6 - 5) 2.4 - 8.4 (1.8 - 6.4) 2.7 - 9.2 (2.1 - 7)
10.9 (3.3) 11 (3.3) 10.9 (3.3) 11 (3.3) 11.4 (3.5) 11.3 (3.4) 11.4 (3.5) 11.3 (3.4) 11.6 (3.5) 11.6 (3.5) 11.6 (3.5) 11.6 (3.5) 12.9 (3.9) 12.9 (3.9) 13.5 (4.1) 12.9 (3.9) 13.6 (4.1)
7.8 (2.4) 9.6 (2.9) 9.7 (3) 9.8 (3) 9.3 (2.8) 9.8 (3) 10.5 (3.2) 10.8 (3.3)
9.8 (3.0) 9.8 (3.0) 9.4 (2.9) 9.7 (2.9) 10.4 (3.2) 10.8 (3.3) 12.8 (3.9) 15.2 (4.6) 15.3 (4.6) 23.2 (7.1)
8.3 (2.5) 8.4 (2.6) 8.8 (2.7) 9.2 (2.8) 9.4 (2.9) 11.3 (3.4) 9.2 (2.8) 9.5 (2.9) 9.9 (3) 10 (3) 10.3 (3.1) 10.6 (3.1) 9.3 (2.8) 9.2 (2.8) 9.3 (2.8)
.
EL LOADERS LISTINGS
R COMPLETE WHE IPMENTGUIDE.COM FO
CTIONEQU
VISIT WWW.CONSTRU
MAX DUMP HEIGHT FT. (M)
Page 76 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Volvo L45H, L50H Compact Wheel Loaders Deliver High Breakout Torque The H-series wheel loaders from Volvo Construction Equipment (Volvo CE) are powerful assets on every job site and in every application. Equipped with Volvo’s torque parallel (TP) linkage, these machines are built to deliver high breakout torque and excellent parallel movement throughout the entire lifting range. With a new Volvo D4J Tier IV Final engine both the L45H and L50H boast a 15 percent improvement in fuel efficiency versus previous models. The L50H also has an impressive 20 percent improvement in hydraulic pump capacity, leading to 26 percent faster cycle times as compared to previous models, according to the manufacturer. “This is a very versatile size class that can get tough work done in confined spaces,” said John Comrie, product manager of compact wheel loaders at Volvo CE, “and with a laundry list of improvements that make the H-series more fuel efficient, more powerful and more versatile, all while making the operator more comfortable — the L45H and L50H are great choices for any application.” The L45H and L50H feature Volvo’s intelligent load-sensing hydraulic system that drives power to the hydraulic functions according to demand for fast response, shorter cycle times and reduced fuel consumption. An optional boom suspension system (BSS) boosts productivity by up to 20 percent by absorbing shock and reducing bouncing and bucket spillage. Heavy-duty planetary axles ensure long life in the toughest conditions, and the front and rear 100-percent differential locks feature a dog clutch design to improve grip and maintain maximum traction on all terrain. These wheel loaders also feature a hydrostatic transmission that matches power to all operator requirements to provide excellent control in delicate work and full power for more demanding jobs. A Comfortable Control Center The L45H and L50H’s cab is designed for a comfortable, productive work shift. This certified ROPS/FOPS cab features ergonomically placed controls, a superior climate control system, all-around visibility and low internal noise levels. The optional comfort drive control (CDC) function gives the operator the choice to control the machine by a joystick lever mounted to
Cowin Equipment Company, Inc. www.cowin.com Birmingham, AL 205.841.6666 Mobile, AL 251.633.4020 Montgomery, AL 334.262.6642 Oxford, AL 256.832.5053 Pensacola, FL 850.479.3004 Atlanta, GA 404.696.7210 Madison, AL 256.536.9390
Power Equipment www.powerequipco.com Knoxville, TN 865.577.5563 Chattanooga, TN 423.894.1870
With a new Volvo D4J Tier IV Final engine both the L45H and L50H boast a 15 percent improvement in fuel efficiency versus previous models.
Kingsport, TN 423-349-6111 Saltillo, MS 662.869.0283
“This is a very versatile size class that can get tough work done in confined spaces.” John Comrie Volvo CE
the left-hand console. This improves operator comfort, reduces fatigue and ensures better productivity over long working hours. For increased safety, large, anti-slip steps and handrails ensure easy cab entry and exit. Maintenance Made Easy Volvo’s L45H and L50H have been built for easy, hassle-free servicing. Ground-level service points and grouped greasing points ensure easy and quick maintenance. The oscillating rear axle is supported on maintenancefree cradles. Its bearings and bushings are lubricated for life and protected by well-proven seals, saving hours of maintenance time. Through the Volvo CareTrack telematics monitoring system, fleet managers are given real-time visibility into vital machine information. Everything from fuel consumption and idle times to location tracking and service reminders can be monitored to help reduce total cost of ownership and increase profitability throughout the entire life of the machine. Fleet managers also have the option to engage their local Volvo CE dealer in the proactive monitoring and reporting of CareTrack data through
the Volvo ActiveCare program, effectively simplifying fleet management. The L45 and L50H models are offered further support via the Volvo Lifetime Frame and Structure Warranty, which covers the frame, articulation joint and loader arm during the period of initial ownership or the full life of the machine — whichever is less. Get Attached These wheel loaders are designed to work in harmony with a range of Volvo attachments — from forks and buckets, to grapples and material-handling arms — each perfectly matches the link-arm geometry to optimize breakout, rim pull and lifting force. These machines can be factory-fitted with extra hydraulic lines to operate and run a variety of attachment options, and the standard attachment bracket is ISOstandardized for quick and easy interchange of attachments. For more information, call 717/5329181 or visit www.volvo.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
ACT Construction Equipment www.actconstructionequipment.com Charlotte, NC 704.323.7934 Winston-Salem, NC 336.397.5000 Wilmington, NC 910.254.3525
Southern Gulf Equipment Rental & Sales, Inc. www.southerngulfequipment.com 6570 Corporate Park Circle Fort Myers, FL 33966 239.768.1869
Rob’s Hydraulics, Inc. www.robs-hydraulics.com 7765 Pitt St. Grimesland, NC 27837 252.752.1500
CCS Equipment Sales, LLC www.ccsequipment.com Raleigh, Durham, Chapell Hill 5428 Highway 96 • Youngsville, NC 27596 919.556.9110 Fuquay-Holly Springs-Sanford-Fayetteville 836 North Broad St. • Angier, NC 27501 919.935.0505
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 77
Pros P Pr ros r os K Know! Kno no ow! w!
®
Those in the know, know Takeuchi
Tough, Powerful, Dependable
Atlantic Coastal Equipiment Sales & Rentals
Cobb County Tractor
www.acesalesandrentals.com
Marietta, GA 770.427.1348
922 Longwood Drive Richmond Hill, GA 31324 912.459.1155
www.cctractor.com
Bennett Equipment & Supply www.bennettequipment.net
Perimeter Takeuchi Buford, GA 770.614.5730
1403 Piedmont Highway Piedmont, SC 29673 864.277.7272
Flagler Construction Equipment www.flaglerce.com 8418 Palm River Road Tampa, FL 33619 813.630.0077 Fax: 813.630.2233
8750 Phillips Highway Jacksonville, FL 32207 904.737.6000 Fax: 904.737.1260
5210 Reese Road Davie, FL 33314 954.581.4744 Fax: 954.583.0318
9601 Boggy Creek Road Orlando, FL 32824-8728 407.850.9614 Fax: 407.850.0823
539 SW Arrowhead Terrace Lake City, FL 32024 386.758.7444 Fax: 386.758.7744
(Export Parts Facility): 6144 NW 74th Ave. Miami, FL 33166-3710 305.477.2442 Fax: 305.477.3383
< Find out what others know, visit takeuchi-us.com for more info >
Page 78 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
The new Hyundai HL955TM wheel loader is the second Tool Master model to join the HL900 series. These models feature parallel linkage, which is especially effective in fork applications where level lifting is important.
Hyundai Adds HL955TM to Tier IV Final Wheel Loaders Hyundai Construction Equipment Americas introduced the Hyundai HL955TM wheel loader, the newest addition to its HL900 series of Tier IV Finalcompliant wheel loaders. The HL955TM joins a family of six other Hyundai HL900 wheel loader models the company began introducing in 2015 to U.S. and Canadian markets. The HL955TM is the second Tool Master model to join the HL900 series lineup following the recent launch of the HL940TM model. It features Hyundai’s Tool Master boom design, with dual linkage for increased lifting capacity, improved load stability, rapid dumping capability and enhanced visibility. The HL955TM comes equipped with a standard 3.5 cu. yd. (2.7 cu m) bucket, and delivers 28,219 lb. ft. (12,800 kgf) of bucket breakout force. A Cummins QSB6.7 Tier IV Final engine rated at 199 net hp (149 kW) powers the HL955TM.
Accurate Onboard Weighing System Is Standard Like other Hyundai HL900 series wheel loader models, the HL955TM includes Hyundai’s proprietary onboard weighing system, which is accurate to +/- 1 percent. The system has automatic and manual settings for monitoring individual and cumulative bucket load weights. System measurements are displayed on the multi-function screen in the cab, providing reliable loadweight monitoring to support efficient production management. However, there is no onboard printer to facilitate certified load measurements. Productivity and Fuel Economy Among Key Upgrades “The HL955TM provides the power, productivity and ease of operation customers have come to expect from Hyundai,” said Corey Rogers, marketing manager, Hyundai Construction Equipment Americas. “Like the other models in our HL series, the
HL955TM provides an exceptional operator environment, productivity enhancements and operating efficiencies.” The Hyundai HL955TM wheel loader, like other HL900 series models, delivers up to 5-percent greater productivity and 10-percent lower fuel consumption than previous 9A series models. HL900 series loaders achieve greater fuel economy as a result of such features as Hyundai’s Eco Pedal, programmable auto-engine shutdown (available with the smart key option) and Eco Gauge, according to the manufacturer. Improved Cab Design The large, quiet cab on the HL955TM wheel loader includes a 7 in. interactive touch-screen monitor, enhanced climate control, fully adjustable and heated air-ride seat, centralized control switches and significant in-cab sound reduction. The cab has been reconfigured for additional floor space and improved visibility. For added operator comfort, in-cab sound levels were reduced
by 3 dB, making this one of the quietest cabs in the industry. An optional smart start ignition system for password- or Bluetooth keyenabled machine start also is available on the HL900 series machines. Ergonomically positioned operator switches, controls and other features make it easier to quickly access critical functions. An improved rearview camera delivers higher resolution and enhanced nighttime visibility. Industry-Leading Warranties The Hyundai HL955TM is protected by Hyundai’s three-year, 3,000-hour standard warranty and five-year, 5,000-hour structural warranty. Hyundai also includes three years of free access to its Hi-Mate remote management system which provides a variety of remote monitoring and diagnostic services. For more information, visit www.hceamericas.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 79
CASE AUTHORIZED DEALERS Alabama 1 SOURCE Mobile
Mississippi (251) 380-7800
COWIN EQUIPMENT Birmingham (205) 841-6666 Madison (256) 350-0006 Montgomery (334) 262-6642 Oxford (256) 832-5053
LOW TCO AND HIGH ROI ROLLED INTO ONE IMPRESSIVE MACHINE.
ABBY EQUIPMENT Saltillo (662) 869-3439 AYRES-DELTA Leland
(662) 686-2361
JWH EQUIPMENT Jackson (601) 974-8090
Arkansas
LEE TRACTOR CO. Biloxi (228) 392-9922
HEARTLAND EQUIPMENT Jonesboro (870) 932-8383
North Carolina
POTTER EQUIPMENT Harrison (870) 741-8900 SCOTT EQUIPMENT COMPANY Fort Smith (479) 648-1600 Mabelvale (501) 455-5955 Springdale (479) 751-4242 Texarkana (870) 772-0204
Florida TREKKER TRACTOR Fort Myers (239) 690-0661 Hialeah Gardens (305) 821-2273 Lake Worth (561) 845-2273 Orlando (407) 888-0024 Tampa (813) 621-5811
Georgia
HILLS MACHINERY Charlotte (704) 208-5564 Greensboro (336) 308-3045 Greenville (252) 752-7145 Raleigh (919) 746-7938
South Carolina HILLS MACHINERY Columbia (803) 658-0200 North Charleston (843) 225-9377
Tennessee ABBY EQUIPMENT Memphis (901) 365-0060 CONTRACTORS MACHINERY Johnson City (423) 975-9111 Louisville (865) 982-6452
BORDER EQUIPMENT Augusta (706) 737-9191 Conley (770) 322-6960 Pooler (912) 748-2828
DIAMOND EQUIPMENT La Vergne (615) 641-1100
HANEY FARM & RANCH Rockmart (770) 684-7277
LAWRENCE EQUIPMENT Ashland (804) 752-8333 Bridgewater (540) 515-9670 Cloverdale (540) 966-0151 Suffolk (757) 539-0248 Waynesboro (540) 942-2610
WALLACE TRUCK & EQUIPMENT Valdosta (229) 219-7641
Louisiana
Virginia
CLM EQUIPMENT Broussard (337) 837-6693 Sulphur (337) 625-5942 CRAWLER SUPPLY Baton Rouge (225) 357-7515 LEE TRACTOR CO. St. Rose (504) 467-6794 SCOTT EQUIPMENT COMPANY Alexandria (318) 448-1647 Monroe (318) 387-4160 Shreveport (318) 226-9696
Based on actual sales data from the past five years, EquipmentWatch has awarded the CASE 580 Series backhoes the first-ever Highest Retained Value Award. That’s high praise for the quality, performance and longevity of an iconic line that also delivers best breakout force, highest lifting capacity, fastest roading speeds and one of the industry’s quietest cabs. So dig deeper, reach further, load faster—and get more at resale with CASE.
LIMITED TIME ONLY!
3-YR/3000-HR PROTECTION PLAN* WHEN YOU PURCHASE ANY CASE N SERIES BACKHOE LOADER
*CASE Premier Protection Plan limited to 3 years or 3,000 total engine hours, with total coverage including manufacturer’s base warranty of 12 months. Premier coverage with a $0 deductible applies in months 13 through 36 or 3,000 total engine hours, whichever occurs first. Eligible equipment includes all new CASE Backhoe Loaders (580N EP, 580N, 580SN, 580SN WT, 590SN). This literature is descriptive only. The precise protection afforded is subject to the terms, conditions and exclusions of the contract as issued. Program participation is subject to underwriting requirements. Programs may be changed or canceled without notice. All insurance products offered through CNH Industrial Insurance Agency Inc. are underwritten by licensed insurance companies. Capitalized terms used in this literature, unless defined herein, have the meanings assigned to them in the contract as issued. ©2016 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Insurance Agency Inc. is an AmTrust Financial company. The CNH Industrial Insurance logo and “CNH Industrial” name are licensed or sublicensed by CNH Industrial N.V. to AmTrust North America, Inc. for use in its insurance agency business. Any trademarks referred to herein, in association with goods and/or services of companies, other than owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates, are the property of those respective companies.
Page 80 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Case 521F Wheel Loader Meets Tier IV Final Standards Case Construction Equipment’s 521F wheel loader meets federal Tier IV Final emissions standards using selective catalytic reduction (SCR) technology. The new machine delivers 131 net peak horsepower with an FPT Tier IV Final-certified engine that also provides quick throttle response and impressive torque. The 22,948-lb. (10,409 kg) wheel loader has a bucket breakout force of 19,303 lbs. with 2.3-cu.-yd. (1.7 cu m) bucket capacity. The SCR technology allows the machine to handle inconsistent engine loads while running at peak performance without compromising power. This is accomplished with a faster throttle response and acceleration, all while maintaining lower exhaust temperatures and improving fuel efficiency, according to the manufacturer. The Case for SCR With SCR technology, the 521F Tier IV Final wheel loader features 10 percent greater fuel economy over wheel loaders featuring CEGR-DPF solutions. Additional fuel savings are achieved with a standard auto-idle feature that helps minimize excessive fuel burn during operator inactivity by further lowering engine RPM. Standard auto shutdown then shuts down the engine after an operatorselected length of time to further preserve fuel. The SCR-only approach found on the new 521F also contributes to machine uptime by eliminating the need for manual diesel particulate filter (DPF) regeneration and the associated downtime that can occur with wheel loaders that use cooled exhaust gas recirculation (CEGR) technology. As an after-treatment system with minimal components, there also is no need for recirculation equipment or a DPF for lower long-term maintenance costs. Additionally, SCR results in extended time between service intervals as lower ambient exhaust temperatures result in slower degradation of engine components and less demand on the coolant system, according to the manufacturer. With Productivity in Mind Like the rest of the F series line-
Case’s 521F wheel loader delivers 131 net peak horsepower with an FPT Tier IV Final-certified engine that also provides quick throttle response and impressive torque. The 22,948-lb. (10,409 kg) wheel loader has a bucket breakout force of 19,303 lbs. with 2.3-cu.-yd. (1.7 cu m) bucket capacity.
up, the 521F wheel loader incorporates powerful and quick hydraulics in addition to a host of features that further enhance machine efficiency and productivity. Among them are: • Standard limited-slip axles that provide traction on slippery or uneven surfaces, with optional heavy-duty axles with locking front differential to reduce tire wear when operating on hard surfaces. • Available with standard Z-bar linkage for large operating loads; XR linkage for extended reach and dump clearance; and the tool-carrier XT linkage for maximum utility, excellent visibility and parallel lift. • A wide variety of tires, including snow tires. • Buckets available with the 521F feature the optional SmartFit bucket tooth system. These heavy-duty self-sharpening
teeth combine strength and an unmatched ease of installation due to a hammerless fastener system with reusable locking pins. • An expanded selection of attachments, including new buckets, rotary brooms and forks. Optimal Comfort To provide total comfort and help boost the operator experience, the 521F wheel loader features the Case quiet cab. A dual air filtration system, optional heated air-ride seat and insulated cab mounts provide a clean, quiet operating environment while floor-to-ceiling windows, an improved lighting system and optional rearview camera provide visibility all around the machine. The 521F also features an award-winning joystick steering option and an advanced instrument cluster with four selectable power modes (economy, standard, max and auto) for precise, intuitive con-
trol.
the back of the machine.
Innovative Cooling and Easy Service The 521F features the Case midmounted cooling system. Unlike stacked coolers on other machines that transfer hot air to the inner coolers, the Case cooling system is configured like a cube with all coolers facing fresh and cool ambient air. This improves the effectiveness and efficiency of the cooling system — and also makes it easier to clean. Another benefit of the design is that it moves the engine lower and more to the rear of the wheel loader, which improves balance and access to critical daily service points. The 521F features groundlevel fluid gauges and a tilt-up rear hood that provides complete engine access. The lower profile also allows for a sloped rear hood that further improves visibility to
Protecting Your Investment The 521F wheel loader is covered under Case ProCare — an allin-one heavy machine support program. ProCare includes a suite of product assurances that include a three-year Advanced Case SiteWatch telematics subscription, a three-year/3,000-hour fullmachine factory warranty, and a three-year/3,000-hour planned maintenance contract. ProCare allows business owners to invest in new equipment while helping to make owning and operating costs predictable for the first three years of ownership. For more information, visit www.casece.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 81
How to Select the Right Tires for Wheel Loader Applications
Selecting proper wheel loader tires may make a significant difference between underperforming or excelling on job sites. If the correct tire is chosen for the application, it can save time and money down the road.
By Allison McNeal SPECIAL TO CEG
Selecting proper wheel loader tires may make a significant difference between underperforming or excelling on job sites. If the correct tire is chosen for the application, it can save time and money down the road. Tire Types: Radial and Bias One of the first steps wheel loader owners should consider before purchasing tires is to be aware of what tire types are available. Mike Stark, Doosan wheel loader product specialist, said there are two popular tire styles: radial and bias. According to Stark, a radial tire tends to be more expensive; however, the machine’s total cost of ownership may be lower because the tires provide better traction and flotation, and help contribute to lower fuel consumption.
“Radial tires have better control, especially at higher speeds, because the tires don’t flex as much,” Stark said. “Also, a lower rolling resistance allows wheel loader operators to turn easier.” He said the tires also don’t heat up as much when in high-speed applications, extending tire life. Radial tires typically consist of two parts. The first is the casing, composed of one layer of rubber-coated steel cables that arc from one bead to the other. The second is rubber-coated steel plies — made up of steel belts — which are placed under the tread, helping resist cuts and punctures. Radial tires are ideal in applications where traction, tread wear and distance are important factors. Many times the wheel loader tires are operated on surfaces for loading applications. Operators looking for tires that do well on gravel, as well as pit and quarry applications
when cutting sidewall is a possibility, should consider bias tires because of the thicker side walls, Stark said. “Bias tires have thicker sidewalls, which gives them a stable and smooth ride,” Stark said. “The bias tires perform well because they are more repairable and the distances traveled are normally shorter.” According to Stark, Doosan wheel loaders come with standard bias tires, but many Doosan loaders are sold with optional radial tires. He said it depends on what application the tires will be operated in most. In addition to radial and bias tires, there are solid tires, which are normally reserved for wheel loaders working in scrap yard and industrial applications; and flotation tires, which are wider, but are ideal in soft and muddy ground conditions. Multiple Tread Patterns After determining the best tire type for the
application, the next step is to select the tread pattern or tire design. According to Stark, wheel loader tire treads should be tapered to allow material to exit the tires. In wet or muddy conditions, the excess build-up can fall out of the tire grooves, giving operators more traction on job sites. In common wheel loader applications, an L2 or L3 tread design is recommended. With the L2 tire, maximum traction and cleaning ability in sand and soft conditions is favorable. The L3 offers rock resistance in general loader applications. When looking for tire treads in pit and quarry applications, the bigger the tread number, the better. The L5S or L5 offers deeper tread depth and longer tread life. Although the L4 and L5 tires are more expensive than the lower numbered treads, Stark said the cost of ownership comes into play, again. “If the machine is sitting around for a cousee LOADER page 84
Page 82 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Mustang Answers Demand With New Articulated Loaders
The Mustang 608 and 708 articulated loaders lie within the 60 to 80 hp size class. Both models have Tier IV-certified engine emissions technology, with a Yanmar 64.4 hp (48 kW) engine on the 608 and a Deutz 74.3 hp (55 kW) engine powering the 708.
Answering the market demand for large wheel loaders, Mustang developed the 608 and 708 articulated loaders with customer requests and feedback at the forefront of the design process. The Mustang 608 and 708 articulated loaders lie within the 60 to 80 hp size class. Both models have Tier IV-certified engine emissions technology, with a Yanmar 64.4 hp (48 kW) engine on the 608 and a Deutz 74.3 hp (55 kW) engine powering the 708. The Yanmar engine uses a diesel particulate filter after-treating system, while the Deutz uses a diesel oxidation catalyst after treatment system. The 608 and 708 articulated loaders include standard convenience features such as a digital instrumentation display, PowerA-Tach attachment mounting system and a multi-function joystick. Digging and scraping performance is maximized through the highest breakout forces in their respective classes and front and rear locking differentials, according to the manufacturer. A heavy-duty, oscillating articulation joint offers 45-degree turning angles to the left and right and 10 degrees of oscillation in
both directions for optimal traction and maneuverability. The bucket and tires follow a constant turning radius, so the rear tires of the loader follow the path of the front tires. Narrow machine widths allow access to tight, confined spaces that most skid steer loaders with comparable operating capacities cannot access. The “Z” bar-type linkage allows for mechanical self-leveling action in both the up and down directions, excellent bucket dump angles at the mid- and top-ranges of the lift path, mechanical return to dig, as well as outstanding forward reach. Proportional auxiliary hydraulics are standard equipment and are utilized with a roller switch on the joystick. Detent and pressure relief are included to optimize attachment hook-up and performance. Two easily accessible auxiliary hydraulic lines with flat-face couplers power a variety of tools and make attachment changes easy. Additionally, the 608 and 708 are available with three auxiliary circuit options to the front and rear, including high-flow. An open canopy ROPS is standard and a complete cab enclosure option is available,
providing enhanced comfort and safety for day-long operation. Excellent 360-degree visibility is achieved by positioning the operator above the load for safe operation and excellent view of the attachment. A multifunction joystick controls the lift arm, bucket, float, travel direction, differential lock, speed selection and auxiliary hydraulic functions. An inching pedal allows operators to vary ground speed while maintaining a fixed engine speed to optimally run attachments while enabling precise machine speed control. Optional features include, but are not limited to; a Bluetooth “hands free” capable radio, air suspension seat, LED work lights, rotating beacon, high-flow auxiliary hydraulics, rear hydraulic hook-up, rear mount and clevis, Hydraglide Ride Control, and 3-speed transmission with speeds up 19 mph (30 kph). The Mustang 608 and 708 articulated loaders are positioned in the North American market to meet the needs of agriculture, construction, municipalities, landscaping, recycling and rental. “We are seeing more wheel loaders sold into rental applications due to the low cost of
ownership and intuitive controls,” said Nathan Ryan, product manager of Mustang articulated loaders. “Mustang tailored their design to meet the needs of this market through the economical canopy option, centered automotive style controls, multifunction joystick, and real-time fuel consumption monitoring.” “Mustang is committed to being a complete compact equipment solutions provider, and we recognize that wheel loaders have become a crucial piece of equipment in many industries,” said Ryan. “Mustang offers plenty of options to maximize the productivity of the 608 and 708 articulated loaders. Four auxiliary hydraulic and four auxiliary electrical options support nearly every imaginable attachment. Optional 3-speed and a cab enclosure with HVAC allow for efficient year-round use in the harshest environments. Mustang proudly welcomes articulated loaders to its compact equipment family.” For more information, call 262/334-9461 or visit www.mustangmfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 6, 2016 • Page 83
ALABAMA
FLORIDA
GEORGIA
MISSISSIPPI
TENNESSEE
LYLE MACHINERY Mobile, AL 251/338-2555
LYLE MACHINERY Pensacola, FL 850/483-5868
GRovE RIvER Richmond Hill, GA 912/756-7854
MID SoUTH MACHINERY Gulfport, MS 228/867-1555
DIAMoND EQUIPMENT La Vergne, TN 615/641-1100
AMAN CoNSTRUCTIoN EQUIPMENT 2728 Canton Hwy. Cumming, GA 30040 770/888-2832 CRoSBY EQUIPMENT CoMPANY, INC. 1826 South Peterson Ave. Douglas, GA 31535 912/384-4664
Jackson, MS 601/948-6740 Tupelo, MS 662/690-6553
NORTH CAROLINA
SOUTH CAROLINA
MAY HEAvY-EQUIP 5941 NC Hwy 8 Lexington, NC 27292 866/629-3784
MAY HEAvY-EQUIP 1330 Buckner Road Columbia, SC 866/629-3784
RoB’S HYDRAULICS, INC. 7765 Pitt St. Grimesland, NC 27837 252/752-1500 7868 US Hwy. 70 Clayton, NC 27520 919/243-0631 www.robs-hydraulics.com
1050 Drop Off Drive Summerville, SC 29486 866/629-3748
VIRGINIA ATLANTIC EQUIPMENT & SUPPLY www.aeandsupply.com 2201 Mingee Dr. Hampton, VA 23661 757/827-4778
Page 84 • July 6, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide
Camso Launches Two New Wheel Loader Tire Solutions Camso — formerly Camoplast Solideal — added two new wheel loader tire solutions to its line-up: the Camso WHL 775 and the Camso WHL 773. The Camso WHL 775 is a high performance solution built to excel in severe conditions. Developed as a solution for harsh waste, recycling, demolition and scrap yard applications, the Camso WHL 775 has an extra deep L5 lug tread for enhanced durability and protection against flats on extreme mixed and hard surfaces. The contoured lug base promotes material ejection and defends against cracking. Its robust carcass improves stability and with a heavy-duty sidewall construction that resists side impacts and deformation under heavy loads. This bias L5 tire also is especially relevant for those customers looking to flat proof their tires with urethane fill, according to the manufacturer. “We build and offer a wide range of products to operate in numerous niche applications and environments,” said David Fleischhauer, executive direc- Camso added two new wheel loader tire solutions to its line-up: the Camso WHL 775 and the tor, market development — construc- Camso WHL 773.
tion at Camso. “Offering tires that last longer, reduce downtime and enhance productivity helps us bring a lower operating cost solution to our customers’ fleets. These two new wheel loader tires will do just that.” Developed with a solid understanding of construction equipment mobility issues and what’s required to enhance productivity, the Camso WHL 773 excels in the most rigorous and demanding job sites. Its monoblock tread pattern provides optimal performance on hard surfaces and is designed to resist rubber chipping and chunking. A wide footprint ensures excellent stability in rocky abrasive conditions. Designed with a high lugto-void ratio, the Camso WHL 773 provides tremendous durability and increased defense against tread impact, according to the manufacturer. Both the Camso WHL 775 and the Camso WHL 773 are now available from Camso dealers. They were officially launched on Jan. 18, 2016. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Customers Should Consider Tread Pattern of Tires LOADER from page 81
ple of hours each day, the owner might want to look at the up-front cost,” he said. “However, if he’s continually operating the machine, he may want to invest up-front in the right tire to save him money down the road.”
daily maintenance checks, including monitoring tire air pressure, to maximize tire life. “If the operator has low tire air pressure it may put more pressure on the outside of the tire, creating problems later on,” he said. “Owners also have to make sure they don’t have too high of air pressure in the tire, either. If a tire is under- or overinflated it may cause the wheel loader to burn more fuel, which isn’t efficient.” Choosing the proper tire for the application can be Mike Stark confusing; however, with tips from product specialists and Doosan information from an independent dealer, maximum tire longevity can be achieved. For more information, visit DoosanEquipment.com. tires going into a pile could produce more (This story also can be found on tire cuts and also causing the tire to wear Construction Equipment Guide’s website at faster. Stark added that operators should perform www.constructionequipmentguide.com.) crete applications. The way an operator handles his machine also plays a part in the tire’s longevity, Stark said. For instance, operators who spin their
“Radial tires have better control, especially at higher speeds, because the tires don’t flex as much.”
Maximizing Tire Life To maximize the wheel loader tire’s life, customers must first understand that each job site is unique and that some applications may tax the tire more than others. “A typical tire lasts between 2,000 and 3,500 hours, but it all depends on the application,” Stark said. “You have to consider what applications the operator will be using the machine in to determine if your tire will have longevity.” For instance, a tire that is used in rock or quarry applications may have a shorter life span than a tire used in sandy, dirt or con-
3 Tips for Maintaining Wheel Loader Tires 1) Always do a machine walk-around, paying close attention to the tires. No material should be sticking out of the tire. 2) Inspect the sidewall of the tire, making sure there are no solid cuts on the tire. If there is a cut, make sure to get the tire fixed as soon as possible. 3) Monitor tire air pressure on a daily basis.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 85
ALL STAR EQUIPMENT RENTALS & SALES, INC. 11680-B Metro Parkway • Fort Myers, FL 33966 888-459-7147 www.allstareq.com
B&M EQUIPMENT 2208 NW 71st Place • Gainesville, FL 32653 352-336-9800 • Fax: 352-336-6972 7722 SE 126th Place • Belleview, FL 34420 352-245-9800 • Fax: 352-245-4950 324 Dennard Avenue • Jacksonville, FL 32254 904-378-0889 • Fax: 904-378-0886 www.bmequipment.com
AGF MACHINERY 1760 Reeves Street • Dothan, AL 36303 334-699-5100 www.agfmachinery.com
ACTION RENT ALL 27 Center Rd. • Cartersville, GA 30120 770-382-7368 • Fax: 770-382-7433 95 Three Rivers Drive • Rome, GA 30161 706-291-0222 • Fax: 706-291-1062 www.actionrentall.com
SOUTHLAND MACHINERY 8920 Weaver Avenue Leeds, AL 35094 888-791-3173 791 Anderson Road Montgomery, AL 36110 866-954-6522 30 Plunkett Avenue Anniston, AL 36201 256-312-4639
Page 86 • July 6, 2016 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide
Since
1985!
Plans to Include 1,500-Acre Terminal for S.C. Side of River PORT from page 1
NEW, USED & REMAN PARTS • • • • • • • •
Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!
www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com
ting the cost of the studies. The massive 1,500-acre terminal is planned for the South Carolina side of the Savannah River not far downstream from Savannah, Ga., on the other side of the river. The first phase is expected to cost about $2 billion. The plan is to have the terminal come online in the mid-2020s when port capacity in both Charleston and Savannah begins running out. Michael Rieger of consulting firm of Moffat and Nichol told the board that three related studies must be completed to get the required permits to build the terminal. The first, which is under the purview of the Charleston District of the U.S. Army Corps of Engineers, deals with the environmental impact of building the terminal. The consulting firm of Atkins North America will assist the Corps in that review.
Tractor Tracs Inc. Undercarriage Specialists
Ca ll F o r a
F R EE ES T I M AT
E!
Caterpillar® John Deere® Komatsu® Case® Hitachi® Liebherr® Volvo® Samsung® Kobelco® Fiat-Allis® Others... Undercarriage • Tracks • Track Pads • Roller • Idlers • Sprockets • Cutting Edges • Bucket Teeth • Rubber Tracks Also Stock Undercarriage Parts for Bobcat®, Takeuchi®, Gehl®, Mustang® & New Holland® 5505 Caterpillar Drive, Apex, NC 27539
919-387-1050 • 888-526-9740 • www.tractortracs.com
Meanwhile, the Savannah District of the Army Corps of Engineers will review the impact of building the terminal in an area that is now used to dispose of silt dredged from the river’s navigation channel. Another review will deal with how changes made in the river to accommodate the new terminal will affect navigation. During the coming fiscal year, a notice of intent is expected to be issued, formally telling the public of plans by the terminal board to seek permits for the project. That will mean a website will be launched where the public can get information on the project. Planners hope that by this time next year, the Corps of Engineers will be ready to start compiling a preliminary environmental impact statement outlining the environmental impact of the planned terminal. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • July 6, 2016 • Page 87
EMPLOYMENT OPPORTUNITY $3.00
ed Publish Nationally
7.” nded 195 per… Fou n Newspa )!! 0 '%% Constructio
1
ern West n Editio
om uide.c mentg onequip nstructi www.co
rado 0 in Colo -7 I f o n o Porti ll Closes Rock Fa t Read ion’s Bes “The Nat &"+'&
. IX
• Vol 6, 2016 March
)/% &
• • No. 5
)$-! 0
0
0
*#$
+
,""$!)' te 70 in on Intersta l in incident Feb. 15 is stil rock fall A large rn Colorado on edied. nwood este Northw s of being remurred in Gle around ces the pro rock fall occ rfield County,ent of Ga tm in The par is De traffic which Canyon,a.m. Colorado) crews flaggedto clear d OT 2:30 tion (CD as they workein the same day e incident Transporta t night. out the through A second slid9:03 p.m. thased I-70 boulders. occurred at OT fully clo location hour later, CDsafety. was on About anthe canyon for hazards teamn by helthrough y, CDOT’s geoted the locatio s damInitiall also evalua that there wa and ge d and the site They determine ining wall, brid e icopter. roadway, reta ond slid the to sec age orted. ght in the guardrail.i-truck was cauinjuries were rep A sem ed, but no ! ! " abl "! dis ( and % *!! / )!& PONDENT RES CEG COR
!
$
!
!
o ation phot in nt of Transport o Departme nt on I-70 ve/Colorad Tracy Trulo kfall incide
. 15 the Feb ed. ge in vy dama re report ed hea injuries we No i suffer A sem ood Canyon. Glenw
roc
artners ore Seattle Tunnel P Mining M s d e e 99 Nev. N Mine umes SR Time onnd Status Res rfu $ Supe Alaska Spends $4 3M to Upgrade D alton Hwy.
#
Published Nationally
$3.00 quality work and the ed tunnel /ations of avaexc • Updatluding calcul ed d during Western inc plans, l remove has receiv wit Ed Partners resume tun- amount of soitunnel ring. sonnel ith-ion Tunnel Seattle l permission toSR 99 Tunnel tion of each ent of key per gram. pro nm • Vol. IX • No. onaructio on the after Read Const 9• • Realig conditi assurance protocols. ! '-# $ '"+ n Newspaper… mining “susrations . ) Founded 1957.in their qualitylity assurance positions (!"$ )%$ neling opeSTP resumed key lifted themin ing ” • Ne www ! w qua . .construc nel at on. Project.T con ditionally t. hal %##ted ' y rati quipme " ! et- tguid w personing opetione men .• Ne '&&!) WSDO for cause” thaivities in Januar , e.com ..........4 l regtunnel daily tunneling pants / '++ D PRESS by federa hin the tici Contents pension ging-related act idents. ATE dline set e needs more ing wit• Restructurede additional par inc dea lift bar Table of ASSOCI a ety for to saf and stat ons two the ) Facing includ osition diction 11-14 P will be ings that ols. Se following t of the conditi Nev. (AP Sandoval saidlong-held opp ong the n to con se , t ST en NO se, .. tall an RE its cau protoc the decisio As par sion for cau rd and ins ed am end - %'" Attachm.................... , Gov. Bri s. andWSDOT made suspension for evaluwa #- a mine list pen ether to%+ vad tors for .... ring sus wh ula .... nel nel iCEG ide the .... erts tun Ne DENT CORR tun the .. to dec ned ESPON icials not s. mitted totely 25 concretest demonstrate tionally lift of tunneling exp per r Section-27 timeing an abandotaminated site him ency off ADOT&P ima F photo ( "! tion Ag n’t hear from ton’s .25 & Traile hav they mued a number of after its team approx The Protec most con Trucks........................ y did *!! this time, entalDalto conHigh nmnstru nation’s Enviro waycing Yeringfund’s During y have implement Reco thant if the ........ & can safely ction month poscte pla U.S. proje Super 32 pro al lastern $ )$ that the to ensure they nges include: mally oninthe Alask for dar ........ # fied Sandovnorth a has mineunder % &len & # # they’dsever changes ing. These cha s% Ca per $ federal rch-. cop a al Jan. 29,gone Ma modi min Busines nda as e by ficatio ady p n tinu soo asaco a result t asweath eral hel e isnsalre ....33-43 former An y Lisof er-rel ated ught fed era min condi Priorittions. Section Initia War-II n that inbro NationalWo rldwith atiobegun Recycling ignlly a ades ( "! The 2015 $27 ......46-59 nd site, *!! million conSection Superfustruction contra Cruz Constructict awarded to The Dalton High Auction .58 of the project on, the scope is considered way ex ........ Ind encom vital rs passed infrastructure se reconstruction for the Adverti Highway from of the Dalton state. mi. post 401 to that included raisin 414, with impro vements verts and surfac g the grade 7 ft. (2 m), replacing culextended south ing the gravel road. The projec "& ! % increased to $43to mi. post 397 and the contrat was soon #$ "& ! ' % $ as well as repair million to cover the additi ct amount ADOT&PF photo onal roadway s due to flooding. (
# $
$%$ (
!#
Construction Equipment Guide, the industry’s leading trade publication, has an opening for regional sales managers in our Western region (CA, AZ, UT & NV) and our Southeast region (FL). Candidates must have a successful track record in outside sales; experience in both print and digital advertising; and excellent verbal and written communication skills. Knowledge of the heavy equipment industry a plus. Past experience should demonstrate self-starting mentality, strong work ethic and record of high achievement. Bachelor’s degree required.
“The Nation’s Best
May 1, 2016
% & %
Regional Sales Managers
.
Variables consi figuration of dered for breakup and the rate ice in the Sag River;flooding risk include the the snowpack of thaw they amou initiate. ; and spring nt and contemperatures
&
Groups Urge C Address Workeongress to Gov. Fallin OKs r Shortage Com pletion of Cultural Center
Leading const tions are callin ruction industry organizatechnical educag on Congress to make caree
advantage of new
oppor Table of Cont ity. In a letter tion (CTE) a top policy prior-r confronted with a new tunities, they are ents ................ challe to 4 Associated Equiplawmakers coordinated by of skilled technical workers.”nge: a shortage ment Distributor The letter from and delivered s (AED Atachment Secti const on ......11-14 ciations urged on April 18, 23 national asso-) supplier and labor organ ruction, contractor, Senate to swiftlmembers of the House and the stark findings of izations highlighted a Truck & Traile y reauthorize American Indian Cultural progr and improve study sponsored by the recently-released Center & Museum photo ........................r Section ........ work ams designed to help train AED That ..............25-27 ers. technical Colle report, prepared by resear Foundation. chers ge of William The groups and Mary, foundat the Recycling Secti passing transp praised Congress for recently equipment technician the ortati on ........33-42 the shorta difficulty recruion and tax bills but said dealers approximately $2.4 ge is costing in lost revenue ting workers threat billion per year to undermine the Auction Secti and econo ened a lack )! *## ()%'on ..........46-5 of “hard skills” mic activity. Citing “By restoring economic benefits. 5 %$ & as al transportati near-term certainty to feder- nician positions are goingthe top reason techBusiness Calen on unfilled, the study dar ............47 through passage ofprograms and tax policy noted that vacancies at const ruction equip in late 2015, Cong the FAST and PATH Acts ment dealerships remai n open for longe Advertisers Index growth in const ress has set the stage for than three times the nation r ..............54 busin ruction, manu al average. “The Cost work factur overruns led ess purchasing force ing, to political ,” the letter and construction equip challenges facing the and a shift “However, disag said. as companies prepare to take
ment indus unique,” AED President & try aren’t CEO Brian ( &
in priorities reements American India that halted work on the now an empt n Cultural Center and y concrete-a looms over two nd-steel curioMuseum, sity that town Oklahomainterstate highways near downCity.
Sales managers will be working with equipment manufacturers and dealers to create and maintain successful advertising programs. Construction Equipment Guide offers a competitive salary, high commission potential, paid training, health insurance, 401K, and company car. For our Western region, Email resume to DennisHogeboom@cegltd.com For our Southeast region, Email resume to Tmckeon@cegltd.com ®
www.constructionequipmentguide.com
Page 88 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Recent Demolition of Rental Car Structures Paves Way for New Gates AIRPORT from page 1
rapidly, first as the busiest hub for US Airways, and now as the second-busiest for American Airlines. Jack Christine, deputy aviation director, described the demolition as another milestone in the airport’s development. Work began in February 2016 and was completed in mid-April. A total of 12 buildings/garage structures had to be torn down, along with 19 attached/unattached metal canopies. The canopy demolition required an excavator to pull the structures to the ground. Metal sheeting was pulled off and sorted according to material type. The remaining steel canopy structure was sliced into smaller sizes by cutting crews using torches. “The buildings were first remediated of any asbestos,” said Houser. “Demo began with removing the masonry. The operator would typically remove a wall, then reach in the excavator bucket to sweep back and forth to knock down interior walls. Then, he would pull the debris out and sort through it to separate metal, wood and masonry.” Houser said leftover materials such as steel, aluminum, copper and masonry/concrete were dealt with accordingly. “All recyclables were moved to sort piles for haul away. During windy conditions, water would be sprayed on the demo area to keep dust and debris from blowing away.” Two tracked excavators with hydraulic thumb attachments were used on the job, along with a skid steer loader with a broom attachment for cleaning. During the construction, ground water monitoring wells had to be closed, along with fluorescent bulb removal. Crews also had to remove underground fuel tanks and clean the soil to make way for the expansion of Concourse A. “Previous soil borings indicated contaminated soils in the areas of the USTs,” Houser said. “The tank access points would be exposed. A HAZMAT recovery truck would remove any remaining product.” Soil samples were taken in the around the perimeter of the tank. Soil removal would begin in the areas of high contaminate readings. The contamination would be chased by removing the soil until reading dropped to acceptable levels. Sampling was performed by an environmental firm hired by the contractor per the contract specifications and verified by an on-site environmental firm hired by the airport. Officials said the aviation department has worked closely with airline partners and others to develop the plan, and will quantify benefits and costs of additional development and define the phases of development. Destination CLT encompasses the first phase of a recently completed master plan update, a collaborative effort with airline partners and the FAA. It represents a significant capital investment in capacity enhancement projects. Destination CLT projects include an elevated roadway and terminal curb front, Concourse A expansion — Phase I,
East Terminal Expansion — Phase II, terminal renovations, Concourse E expansion — Phase VIII, terminal lobby expansion, fourth parallel runway, Concourse A expansion — Phase II, Concourse C expansion and Concourse B expansion. Construction is under way on the elevated roadway and terminal curb front. Because the airport has experienced so much growth, it has taken a toll on the existing roadway system in front of the terminal. A three-year project, construction began in winter 2015 and should be completed by summer 2018, at a cost of $50 million. Concourse A expansion —Phase I calls for nine gates north of Concourse A to accommodate expanding air service and replace several existing gates. The two-year, $200 million project also includes construction of the concrete ramp and taxi lanes needed to operate the new gate. Work is expected to wrap up in 2018. The East Terminal expansion — Phase II project plans for a three-level addition of approximately 51,000 sq. ft. (4,738 sq m) at Concourses D and E. The addition will provide an area for multiple concessions on the departures/ticketing level and will double the current number of escalators and elevators. It will upgrade passenger circulation to Concourse E. Currently, two escalators, one elevator and a narrow stairway convey passengers from the main terminal to Concourse E. The addition of three escalators, one service elevator and a widened stairway will significantly increase the traffic flow to the concourse. Other components of the expansion include a service dock area for Concourses D and E, a food court, restrooms, a mother’s room and animal relief areas. There will also be approximately 12,000 sq. ft. (1,114 sq m) of office level space for future space requirements of the various tenants. The $29 million, two-year project should be completed by summer 2018. CLT’s terminal building, constructed in 1982, is in need of an update. Improvements will include terrazzo to replace carpet, wall finishes, new ceilings, a new public address system and improved LED lighting. Work will reportedly begin first in Concourses A and B, and move to Concourse C and the atrium. Construction should start in September 2016 at a cost of $55 million, and is expected to last three years. The Concourse E expansion — Phase VIII will create 25,000 sq. ft. (2,322 sq m) of hold room and support space on the north end of Concourse E. At this time, passengers utilize hold room space of other Concourse E gates and walk under temporary canopies to access aircraft hardstand parking. An additional 6,000 sq. ft. (557 sq m) of open ramp space will be enclosed along the east wing of Concourse E at gate E16 to accommodate passengers of hardstand aircraft. The project will shield passengers from the elements, see AIRPORT page 92
And Your Hitachi Dealers
Coastal Equipment www.coastalequipment.net 504 South Military Hwy. 333 Freedom Blvd. Virginia Beach, VA 23464 Yorktown, VA 23692 757/424-1900 757/898-1900
Carolinas’ Division 103 Commercial Ave. Ahoskie, NC 27910 252/332-5550
305 N. Main St. Mt. Gilead, NC 27306 910/439-5653
9550 Statesville Road Charlotte, NC 28269 704/597-0211
3816 Martin Luther King Blvd New Bern, NC 28562 252/638-5838
5039 US 301 South Fayetteville, NC 28348 910/424-1200
380 Anderson Road Highway Rock Hill, SC 29730 803/325-1555
1128 Hwy 70 West Raleigh, NC 27529 919/772-2121
Northside Industrial Park Wilmington, NC 28429 910/675-9211
411 South Regional Road Greensboro, NC 27409 336/668-2762
288 Westgate Drive Wilkesboro, NC 28697 336/973-8201
3604 Highway 264E Greenville, NC 27834 252/758-4403
101 Bruce Road Asheville, NC 28806 828/667-0176
Virginia Division 11047 Leadbetter Rd. Ashland, VA 23005 804/798-6001
287 Victory Road Winchester, VA 22602 540/667-9777
3902 W. Main St. Salem, VA 24153 540/380-2011
9107 Owens Drive Manassas Park, VA 20111 703/631-8500
98 Expo Road Fishersville, VA 22939 540/337-3057
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 89
FLINT Construction & Forestry Division 1206 Blaylock St. Albany, GA 31705 229/888-1212 Fax: 229/435-3612
169 Ross Clark Circle N.E. Dothan, AL 36303 334/794-8691 Fax: 334/794-8696
6446 Joe Frank Harris Parkway Adairsville, GA 30103-2628 770-773-9857 Fax: 770-773-7226
50 Morgan Industrial Blvd. Garden City, GA 31408 912/964-7370 Fax: 912/964-1822
4500 Wendell Dr. SW Atlanta, GA 30336-1627 404/691-9445 Fax: 404/696-1170 5333 BBS Way Braselton, GA 30517-1707 770-965-1889 Fax: 770-965-1894 251 Perry Lane Road Brunswick, GA 31525 912-264-6161 Fax: 912-264-5263 2400 Victory Dr. Columbus, GA 31902-3457 706/687-3344 Fax: 706/682-4738 515 Chamblin Rd. Grovetown, GA 30813-3905 706/855-5440 Fax: 706/855-5447
1220 Henderson HWY Troy, AL 36081 334/566-4181 Fax: 334/566-4361 4900 East Highway 501 Aynor, SC 29511 843/358-5688 Fax: 843/358-2826 116 Corporate Drive Simpsonville, SC 29681 864/963-5835 Fax: 864/963-7405 4717 Jefferies Hwy Walterboro, SC 29488 843/539-1420 Fax: 843/539-1424 3464 Sunset Boulevard West Columbia, SC 29169 803/794-9340 Fax: 803/794-9346 178 Seaboard Road Andrews, SC 29510 843/221-4940 Fax: 843/221-4942
136 Acres Drive Ladson, SC 29546 843/572-0400 Fax: 843/572-7746 4600 Pio Nono Ave Macon, GA 31206-5064 478/788-1586 Fax: 478/781-8591
NORTRAX www.nortrax.com 4333 North John Young 3005 Hanson Street Parkway Fort Myers, FL 33916 Orlando, FL 32804 239/334-3627 407/299-1212 4618 Scarborough Dr. 3933 Martin Luther King Jr. Lutz, FL 33559 Boulevard 813/995-0841 West Palm Beach, FL 33404 561/848-6618 4343 Northwest 77th Avenue Miami, FL 33166 305/592-5740
Page 90 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
LeTourneau Super C Tournapull w/Carryall Scraper, 1:50 Scale - $80
Caterpillar 330D L Excavator, 1:50 Scale - $110
Allis Chalmers HD 21 Dozer, 1:50 Scale - $100
Caterpillar 365C L Front Shovel, 1:50 Scale - $100
Volvo A40G Articulated Hauler, 1:50 Scale - $120
Caterpillar 5110B Excavator, 1:50 Scale - $110
John Deere 470G LC Excavator, 1:50 Scale - $85
Caterpillar M316D Wheel Excavator, 1:50 Scale - $60
Volvo L35G Wheel Loader, 1:50 Scale - $120
Volvo L350F Wheel Loader, 1:50 Scale - $145
Komatsu D275AX-5 Dozer, 1:50 Scale - $120
Caterpillar CT660 Red Cab Dump Truck, 1:50 Scale - $90
Caterpillar D6K XL Track-Type Tractor, 1:50 Scale - $65
Case CX250C Excavator, 1:50 Scale - $175
Grove TM1500 Crane, 1:50 Scale - $150
Volvo L90G Wheel Loader, 1:50 Scale - $115
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Email – bmckeon@cegltd.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 91
RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com
ACT Construction Equipment Charlotte, NC 704-323-7934 Winston-Salem, NC 336-397-5000 Wilmington, NC 910-254-3525 www.actconstructionequipment.com Vermeer Puerto Rico Bayamon, PR 787-640-6334
© 2014 Yanmar Yanmar America Corp.
Ditch Witch of North Carolina, Inc. 329 US Highway 70 East Garner, NC 27529 919-772-1214 www.dwnc.com
Hawkins-Graves, Inc. 13432 Wards Rd. Lynchburg, VA 24501 434-847-7703 866-847-7703 www.hawkinsgraves.com
Vermeer of Texas-Louisiana 8272 Rushing Road Denham Springs, LA 70726 225-665-7900 Fax: 225-665-7979
Rob’s Hydraulics, Inc. 7765 Pitt St. Grimesland, NC 27837 252-752-1500 7868 US Hwy 70 Clayton, NC 27520 919-243-0631 www.robshydraulics.com
Vermeer Southeast Sales & Service, Inc. Orlando, FL Boynton Beach, FL 407-295-2020 561-742-7400 Clearwater, FL 727-299-9207
Pensacola, FL 850-944-8110
Ft. Myers, FL 239-337-5900
Marietta, GA 770-973-8811
Birmingham, AL Jacksonville, FL 205-841-9895 904-262-4400 www.vermeersoutheast.com
Page 92 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Three-Year, $247M Terminal Project to Accommodate Recent Growth AIRPORT from page 88
decongest hold rooms and heighten security and safety with boarding bridge equipped gates. The expansion also will allow larger regional aircraft to utilize the concourse due to the rising elevation on the north end and up-gauging of regional aircraft. Construction starts during the summer of 2016 and should be finalized by 2018, with a price tag of $12 million. The planned terminal lobby will be expanded to the north. The three-year, $247 million project will accommodate the growth CLT has experienced in recent years, which has put a strain on the terminal. Construction should begin in 2018 and be completed by 2020. The air traffic control tower project is under design and will be funded and constructed by the FAA. The new tower, to be in commission in 2020, will be built on the south side of the airfield. When completed the new tower will be 367 ft. (111.8 m) tall, the second tallest in the country. The current FAA tower is 150 ft. (45.7 m) tall. The new tower will provide air traffic controllers with a bird’s-eye view of the airfield. An 850-sq. ft. (78 sq m) cab will sit atop the tower, and a 42,000-sq. ft. (3,901 sq m) base building will house the terminal radar approach control (TRACON). The building also will include training rooms, administrative offices and a power distribution supply system. The new facility also will be equipped with the latest NextGen technology, including Standard Terminal
Automation Replacement System (STARS), Data Communications, Automatic Dependent SurveillanceBroadcast (ADS-B) and Advanced Electronic Flight Strip System (AEFS). Regarding other construction plans, an Environmental Impact Statement (EIS) must be completed prior to design and construction of a fourth parallel runway. The runway will be located 1,200 ft. (365 m) west of Runway 18C/36C and between the existing runways 18R/36L and 18C/36C. It will include two end around taxiways and the relocation of portions of West Boulevard and Old Dowd Road. This fourth parallel runway is anticipated to be 200 ft. (60 m) wide and 12,000 ft. (3,657 m) long making it CLT’s longest runway. Construction should start in 2020, with a completion date of fall 2022The projected cost is $422 million.Concourse A Expansion — Phase II is expected to cost $300 million, starting in spring 2020 and completed by 2022. It will continue expansion of Concourse A to the north for an additional 16 gates, while a planned Concourse C Expansion calls for the design and construction of 10-12 additional gates on Concourse C. The work is expected to take 20 months, beginning in 2022 and ending in 2024, at a cost of $463 million. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Association Officials Say Firms Have Trouble Finding Qualified Workers JOBS from page 1
(13.4 percent, 10,400 jobs), Nevada (10.1 percent, 6,900 jobs) and Idaho (3,400 jobs, 8.9 percent). North Dakota lost the highest percent and total number of construction jobs (minus 10.5 percent, minus 3,700 jobs). Other states that lost jobs for the year include Kansas (minus 3,400 jobs, minus 5.6 percent), Pennsylvania (minus 2,900 jobs, minus 1.2 percent), West Virginia (minus 2,700 jobs, minus 8.0 percent), Alabama (minus 1,300 jobs, minus 1.6 percent) and Wyoming (minus 1,200 jobs, minus 15.2 percent). New Jersey added the most construction jobs between April and May (2,900 jobs, 1.9 percent). Other states adding a high number of construction jobs include Florida (2,500 jobs, 0.6 percent), Oklahoma (1,800 jobs, 2.2 percent), Virginia (1,700 jobs, 0.9 percent) and Washington (1,600 jobs, 0.9 percent). Oklahoma added the highest percentage of construction jobs during the past month, followed by New
Jersey, Alaska (1.8 percent, 300 jobs) and Hawaii (1.8 percent, 700 jobs). Construction employment declined in 30 states and D.C. during the past month and held steady in Indiana. Texas shed more construction jobs than any other state (minus 3,400 jobs, minus 0.5 percent), followed by Wisconsin (minus 3,200 jobs, minus 2.7 percent), Pennsylvania (minus 2,900 jobs, minus 1.2 percent) and California (minus 2,800 jobs, minus 0.4 percent). Vermont lost the highest percentage of construction jobs between April and May (minus 6.1 percent, minus 1,000 jobs), followed by West Virginia (minus 5.8 percent, minus 1,900 jobs), Wisconsin and Missouri (minus 2.3 percent, minus 2,700 jobs). Association officials said that considering the low overall unemployment rate for the sector and continued strong demand for most types of construction activity, the fact a majority of states lost construction jobs for the month likely occurred because many firms are hav-
ing a hard time finding qualified workers to hire. They noted that 70 percent of firms reported earlier this year they are having a hard time finding qualified workers. And they called on elected officials to reform and increase funding for career and technical education, enact immigration reform and take other steps outlined in the association’s Workforce Development Plan. “Now that labor shortages appear to be undermining construction employment, it is only a matter of time before the lack of workers impacts broader economic conditions,” said Stephen E. Sandherr, the association’s chief executive officer. “Public officials need to act now to boost investments in the kind of skills-based education programs that help students succeed in school and land high-paying jobs in fields like construction.” For more information, call 703/5483118 or visit www.agc.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
JONESBORO TRACTOR SALES INC. 5312 Stadium Blvd. Jonesboro, AR 72402 888-931-9151 • 870-935-9151
GREENSBORO TRACTOR www.greensborotractor.com 2820 S. Elm-Eugene Street Greensboro, NC 27406 336-273-3606
CHARLOTTE TRACTOR www.charlottetractor.com 1700 Starita Road Charlotte, NC 28206 704-596-8900
TYLER EQUIPMENT CO., INC. 2613 Main St. Conway, SC 29516 843-248-5294
DITCH WITCH OF TENNESSEE www.ditchwitchtn.com Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576
BALDWIN TRACTOR & EQUIPMENT www.baldwintractor.com 22463 State Highway 59S Robertsdale, AL 36567 251-947-4171
kubota.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 93
MASON TRACTOR CO. www.masontractorco.com 1050 Appalachian Hwy Blue Ridge, GA 30513 706-632-3777 McDonough, GA 30253 770-957-3370
Ready y. Set. Save on o Kubota’s SVL Series Compactt T Track rack Loader Load s. s
Cumming, GA 30040 770-887-6119
COASTAL EQUIPMENT SYSTEMS www.coastalequipment system.com 5287 New Kings Road Jacksonville, FL 32209 904-924-9624
RICHARDS TRACTOR AND IMPLEMENTS www.ritrac.com 1995 N.E. 8th St. Homestead, FL 33033 305-247-8711
FUTCH’S TRACTOR DEPOT www.futchstractordepot.com 8515 SR 207N Hastings, FL 32145 904-692-3673
Miami (Doral), FL (parts only) 305-592-7891
Long Term Low Rate Financing
Customer Instant Rebates going on right now!
CROSBY EQUIPMENT COMPANY, INC. www.crosbyequipmentco.com 1826 South Peterson Ave. Douglas, GA 31535 912-384-4664
FLORIDA COAST EQUIPMENT www.floridacoasteq.com 357 Pike Road West Palm Beach, FL 33411 561-369-0414
631 Electric Rd. Swainsboro, GA 30401 478-237-8372
694 Commercial Blvd. Naples, FL 34104 239-435-1667
GROWERS EQUIPMENT CO. www.growersequipment.com 2695 Davie Rd. Davie, FL 33314 954-916-1020
15900 Westpark Lane Fort Pierce, FL 34945 772-461-1003
kubota.com
© Kubota Trractor Corporation, 2016
Page 94 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $115 • Color $165
CLASSIFIEDS Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034
“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of HighQuality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call
Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 13-14 TM
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 14-15 DH Call McLaren 888-492-4230
2004 Cat 330CL Excavator, 9132 Hrs, 247 HP C9 Diesel, 12’9” Stick, 60” Bkt, Extra CounterWeight for Heavy Lifting, Cab w/Heat & AC, AM/FM and Fresh Epoxy Paint. Above Average Leak Free Machine. A Must See ...Asking $75,000 Call Pieper Inc 319-372-2276 14-15 JM
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 14-15 DH Call McLaren 888-492-4230
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 14-15 DH Call McLaren 888-492-4230
2012 Liebherr L528 2 Plus 1 Loader, 134HP John Deere Diesel, Hyd. Disconnects, 18,740 LB Tipping Point, 28,000 Lb Operating Weight, 3440 Hrs, Super Smooth Machine, Completely Reconditioned, Looks & Operates Like New! SN: VATZ0660AZ301908012........ .......................................................................$105,000 Jerry/Justin 330-878-6630 13-14 EB www.HooversTruck.com
eXCAVAtors
LoADers
Wheel Loaders
Hydraulic excavators
Backhoe Loaders
Kobelco sK140 Excavator, s/n 8425, Hyd. Cab, Generator, Grapple bucket, Runs well $72,500.
2006 Cat 430e, EROPS, 4x4, AC, Tier ll Engine, Pilot Control, Standard Loader, Six Function Manual Coupler, Bucket, 7,036 hours..........................$48,000.
'13 Cat 980K, Command Steering, EROPS, Ride Control, AC, GP Bucket, Fast Fill Fuel System, 3,752 hrs...... ................................$345,000.
gibson Machinery, LLC 440-439-4000
Cleveland Brothers 1-855-545-0267 ext. 1
2008 Case CX50B, Mech Thumb, Above average condition, 2,538 hours........$31,900.
Crawler Loaders 2012 John Deere 850K XLt, Cab w/ AC, 205HP, Tier 4, 12' 3'' 6-way blade, 23.5 pads, Winch rear screen, 1,221 hours ................................$184,500.
tyler equipment Co. 843-248-5600
Cleveland Brothers 1-855-545-0267 ext.1 Doosan DL550-5 Wheel Loader, s/n 10042, 7.5 Cy. Bucket, Runs well! 81 hrs........ ................................$440,600. gibson Machinery, LLC 440-439-4000
LAnDsCAPe eQUIP.
Illinois truck & equipment 815-941-1900
trUCKs
Landscape - Misc.
skid steer Loaders
Articulating trucks
Dynapac CA250. Soil Compaction. Pad Foot Bolt-on Shell Kit 84"", New ....$10,500.
2014 new Holland L220, Canopy, 2-Speed Travel, Manual Quick Coupler, Foot Control, 12x16.5 Galaxy Tires 75% REM, 190 hrs ....$30,000.
Moxy Mt31, s/n 730075, Articulated Dump Truck, Runs well! 2,929 hours ....$174,600.
Cleveland Brothers 1-855-545-0267 ext. 1
gibson Machinery 440-439-4000
Asphalt Care equipment Inc. 215-639-9800
DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL? Construction Equipment Guide is THE Place to List It! 2009 Liugong CLG922 LC, A/C, Heat, UC 60%, Fixed Thumb, Plumbed for Hammer, Installed Reman Hydraulic Pump on 09/24/13, Stock# 568, 3294 Hrs, 155 Horse Power.............................................$47,000 Call Jon 812-282-2800 14-15 EB
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 13-14 EB
see your bargain aD in color. only $50 extra FOR 2 INSERTIONS
ONLY
$40
2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less - $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.
Call 800-523-2200 or go online to place your ad:
www.constructionequipmentguide.com/pages/customer/classifieds.asp and place your ad through our website and we will contact you!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 95
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: FINAL DRIVE, 120B CAT P/N 1R5123 CONTACT: WAYNE PH: 912-682-4536 EMAIL: DRYBRANCHVILLAGE@GMAIL.COM FAX: 912-239-5594 –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D6MXL WITH RIPPER UNDER 6000 HOURS ONLY I NEED 2 NOT ADVERTISED USER NEAR NEW YORK UNDER 25000US NO JUNK CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K WHEEL LOADER 4 YD GENERAL PURPOSE BUCKET CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: NEEDED: CHALLENGER 865 OR 875 UNDER 4000 HRS CONTACT: GREG MARTIN EMAIL: MACHINERYMART@ MIDOHIO.TWCBC.COM –––––––––––––––––––––––––––––––– WANTED: PEGSON XA / XR 400 TRACK JAW CRUSHER LATER MODEL, LOW HOUR EAST COAST LOCATION PREFERED CONTACT: RICHARD 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: KOMATSU HD 1500 NEED FRONT WHEEL LH - RH FOR A KOMATSU HD 1500 OFF HIGHWAY TRUCK. FRONT SUSPENSION/SPINDLE + BRAKE ASSEMBLY + WHEEL HUB ASSEMBLY CONTACT: ORIEL BASTIDA PH: 005114512562 EMAIL: ORIEL@CCI.PE FAX: 005114519923 –––––––––––––––––––––––––––––––– WANTED: YANMAR Y10W OR Y10W-1 ANY CONDITION RUNNING OR NOT RUNNING OR FOR PARTS ONLY. CONTACT: GEORGE VARSHOCK PH: 619-933-7806 EMAIL: GVARSHOCK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: WE ARE LOOKING TO PURCHASE CAT 950 , WELL MAINTAINED ORIGINAL PAINT YEAR 1975-UP IMMEDIATE PURCHASE CONTACT: DAW ELGHABER PH: 407-926-0351 EMAIL: INFO@GCIGROUPLLC.COM FAX: 407-926-0351 ––––––––––––––––––––––––––––––––
WANTED: EXCAVATOR CAT 345CLC BETWEEN 6000 - 7000 HOURS. NO PAST REAL HOURS ON THE FRAME AND METER NEAR NEW YORK. ONLY CONTRACTORS NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADERS AND MOTOR GRADER WE ARE LOOKING TO BUY BELOW MACHINES. CAT WHEEL LOADER 936E, 950B, 950E, 966D, 966F, 966H, 972G AND 970F. CAT MOTOR GRADER: 140G, 140H AND 14H I BUY RUNNING OR NON RUNNING MACHINE. PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA PH: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATOR EX200 AND EX400 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE PH: 713-659-0593 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: WE ARE LOOKING TO BUY DYNAPAC ROLLER CA25 AND CA251 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM SUNESARA PH: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR CAT 637-OR 657 D,E,F...SCRAPERS....NOT COAL HAUERS....REMAINED MACHINES PREFERRED..... CONTACT: DALE PH: 360-551-9778 EMAIL: DALE.SALES.HEH@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: KOMATSU 380 JG-1, 580 OR 550 TRACK JAW CRUSHER LATER MODEL, LOW HOUR, WORK READY USA LOCATION CONTACT: RICHARD PH: 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET ––––––––––––––––––––––––––––––––
WANTED: REQUIRED MACHINES FOR PURCHASE COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: 6" TO 12" L39 KUBOTA BACKHOE BUCKET BUCKET & A HYDRAULIC THUMB FOR L39 BACKHOE CONTACT: RALPH STEWART PH: 662-327-3552 EMAIL: RALPHCSTEWART@ BELLSOUTH.NET FAX: 662-327-3552 –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT WANTED TO BUY WE BUY HEAVY EQUIPMENT AND TRUCKS! LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: FORKLIFTS WE ARE LOOKING TO PURCHASE YOUR WORKING AND NON WORKING 80'S 90'S AND LATE MODELS. ALL MAKES AND MODELS!! CASH ON THE SPOT!!!! CONTACT: JOHN PH: 832-900-5824 EMAIL: JNICHOLAS.NICHOLAS MACHINE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BACK HOE REAR BUCKET REAR BUCKET FOR NEW HOLLAND 555D 1996 MODEL CONTACT: JOHN EMAIL: JRELKHUNT@AOL.COM –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: NEED EXCAVATOR EX 5600 HITACHI WANT TO BUY NOW EXCAVATOR HITACHI EX 5600 «35YARD« BETWEEN 5000 AND 12000 HOURS REAL HOURS ON THE METERS AND FRAME NOT ADVERTISED IN THE WORLD USER ONLY OR REPOSES BANK CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA ––––––––––––––––––––––––––––––––
WANTED: CAT WHEEL LOADERS I AM LOOKING TO BUY RUNNING OR NON RUNNING CAT WHEEL LOADERS , MOTOR GRADER AND DOZER. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: DORNIER LOOMS 30004000MM PREFER MODELS PTV/PTS FOR TECHNICAL TEXTILES. 3 LOOMS NEEDED. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON PHONE: 864-574-0404 EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– NEEDED BULLDOZER D10N AND D11N ENC CAB WITH RIPPER GOOD UNDERWANTED: LOADER FOR 255 MF CARRIAGE, USA WELCOME EUROPE I LIVE IN CENTRAL KY MUST BE GOOD PRICE. I NEED 5 UNIT. CONTACT: HARRY CONTACT: JEAN MAURICE BOUTIN PH: 270-402-5781 PHONE: 1-450-346-8975 OR EMAIL: RICEPRESTON75@YAHOO.COM 1-514-386-8975) –––––––––––––––––––––––––––––––– EMAIL: WANTED: SMALL DOZER JEANMAURICEBOUTIN@VIDEOTRON.CA SMALL USED DOZER WITH 3PT HITCH –––––––––––––––––––––––––––––––– LOOKING FOR 16" RUBBER PADS OR AND 540RPM PTO 16" CLIP ON PADS FOR A CAT 305 MIDI CONTACT: TONY EXCAVATOR - HWJ03223. PH: 217-773-2670 CONTACT: MARCEL EMAIL: TONYMATHEWSON@ PHONE: 519-686-1123 YAHOO.COM EMAIL: –––––––––––––––––––––––––––––––– SALES@MARCELEQUIPMENT.COM WANTED: SKID STEERS AND MINI –––––––––––––––––––––––––––––––– EXCAVATORS. WANTED: WIRTGEN MILLING MACHINE CONTACT: JOE DIRT MACHINERY WE NEED TO BUY WIRTGEN MILLING PHONE: 570-250-5559 MACHINE W2100 AND W2200 2000 AND EMAIL: JOE@JOEDIRTMACHINES.COM UP WITH MOBA CONTROLLER, IF YOU FAX: 570-364-5200 HAVE ANY FOR SALE PLEASE EMAIL –––––––––––––––––––––––––––––––– ME PICTURES AND DETAILS. WANTED: WANT BULLDOZER CONTACT: SAM SUNESARA PHONE: 713-855-6170 WANT TO BUY BULLDOZER D9N ENC CAB WITH RIPPER D9R, ENC CAB WITH EMAIL: SALES@MEGAEQUIPMENTS.COM RIPPER D10R ENC CAB WITH RIPPER FAX: 281-727-0415 KOMASTU 155AX-6 SS RIPPER 2012 –––––––––––––––––––––––––––––––– AND UP NO PAST 4000 HOURS ALL WANTED: KOMATSU D37-P-2 UNIT FROM USER NOT ADVERTISED TRACK CHAINS AND SPROCKETS IN CONTACT: JEAN MAURICE BOUTIN GOOD COND PHONE: 1-450-346-8975 OR CONTACT: TOM 1-514-386-8975 EMAIL: TSDREDGING@MSN.COM EMAIL: JEANMAURICEBOUTIN@ –––––––––––––––––––––––––––––––– VIDEOTRON.CA WANTED: TOOLCAT (USED) MADE BY –––––––––––––––––––––––––––––––– BOBCAT WANTED: WE BUY OILFIELD EQUIPCONTACT: MARC JONES MENT WORKING OR NON WORKING PH: 6086954397 EMAIL: MJOSYENE@GMAIL.COM WE PAY TOP DOLLAR. –––––––––––––––––––––––––––––––– CONTACT: JAMIE MILLER WANTED: BULLDOZER D8T WITH 45000 PHONE: 713-256-6006) HOURS EMAIL: JMILLER.SOUTHERNMANWANT TO BUY USA FROM USER 2 CHINE@GMAIL.COM BULLDOZER D8T ENC CAB SEMI U –––––––––––––––––––––––––––––––– WITH RIPPER WITH 45000 HOURS AND WANTED: DEERE 644K WHEEL UP WITH UNDERCARRIAGE POOR LOADER 4.0 YD. G.P. BUCKET MUST BE ALL PIECES MUST BE CONTACT: FRANK @ GROFF TRACTOR RUNNING I NEED 2 FAST PHONE: 1-800-33-GROFF CONTACT: JEAN MAURICE BOUTIN EMAIL: FRANKHORAN@ PH: 1 450 346 8975 OR 1 514 386 8975 GROFFTRACTOR.COM EMAIL: FAX: 732-780-3618 JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––
WANTED: CAT DRIVE MOTOR-PART # 1390848 CAT DRIVE MOTOR (ALSO CALLED A TRAVEL MOTOR), FOR A CAT EL300B EXCAVATOR. THE CAT PART # IS 1390848. CONTACT: NICK PH: (304) 232-1333 EMAIL: WVCOINC@AOL.COM FAX: (304) 233-1333 –––––––––––––––––––––––––––––––– WANTED: DEERE 644K DEERE 644K 4.25 CUBIC YARD G.P. BUCKET CONTACT: FRANK PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: CAR HAULER TO HAUL 8' WIDE X 20' SHIPPING CONTAINERS LOOKING FOR A CAR HAULER THAT HAS A FLATBED THAT EXTENDS DOWN AND OUT. I USED TO USE ONE OF THESE TO HAUL 8' X 20' MOBILE STORAGE / SHIPPING CONTAINERS. THE THING IS... THE BED HAS TO BE 102" WIDE TO ACCOMODATE THE 96" WIDE SHIPPING CONTAINER! CONTACT: SHANE TERRY PH: 951-219-4210 EMAIL: SHANETERRY27@YAHOO.COM FAX: 951-468-4522 –––––––––––––––––––––––––––––––– WANTED: CEDAR RAPIDS REMIX ASPHALT PAVER CONTACT: JD BENTLEY PH: 660-651-2432 EMAIL: SUSANBENTLEY1962@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: CAT 938G QUICK ATTACH BUCKET CAT 928G QUICK ATTACH BUCKET CONTACT: DEBBIE PH: 4064421399 EMAIL: SLICKROCK08@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: REQUIRED MACHINES FOR PURCHASE DAVIS & FURBER WOOLEN CARD. MUST BE 2500MM (100 INCHES). IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: WALKING DRAGLINE WALKING DRAGLINES OF 50M3 BKT CAPACITY AND BIGGER. CAT,MARION,BE ETC CONTACT: ALEEM BAKSH PH: +64 211263938 EMAIL: GCTLTD@XTRA.CO.NZ ––––––––––––––––––––––––––––––––
Page 96 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Syracuse, NY Sat., July 16, 2016 For: Very Large Late Model Rental Return Auction • Dallas, TX Tues., July 19, 2016 @ 1PM For: RENTALS! Construction Equipment & more • Queretaro, Mexico Fri., July 29, 2016 For: Late Model Construction Equipment & more • Chicago, IL Fri., July 29, 2016 For: Snow Extravaganza Phase 1 • Racine, WI Sat., July 30, 2016 For: Rental Fleet Construction, Logging & Agricultural Equip. • Webster, MA Sat., August 6, 2016 For: Liquidation Construction Equipment • Orlando, FL Wed., August 10, 2016 For: Rental Return of Late Model Construction Equipment • Hagerstown, MD Thurs., August 11, 2016 For: Late Model Construction Equipment & more • Williamsport, PA Fri., August 12, 2016 For: Large Job Completion of Construction Oilfield Equipment • Atlantic City, NJ Sat., August 13, 2016 For: Snow Extravaganza Phase 2 • Watertown, NY Sun., August 14, 2016 For: Estate Auction, Construction Equipment & more • Johnstown, PA Sat., August 20, 2016 For: Late Model Construction Equipment & more • Las Vegas, NV Sat., September 10, 2016 For: Large Job Completion & Rental Returns Auction • Auburn, ME Sat., September 17, 2016 For: Retirement Liquidation, Late Model Construction Equipment • Rochester, NY Sat., October 8, 2016 For: Large Municipal Construction Equipment & more • Houston, TX Fri., October 14, 2016 For: Special Large Construction Equipment & more • Chicago, IL Sat., October 15, 2016 For: Snow Extravaganza Phase 3 RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Kansas City, MO Wed., July 13, 2016 • Gillette, WY Tues., July 19, 2016 • Fort Worth, TX July 20 - 21, 2016
• Los Angeles, CA Fri., July 22, 2016 • Riverside, CA Sat., July 23, 2016 • Manchester, NH Tues., July 26, 2016 • Albuquerque, NM Wed., July 27, 2016 • Elkview, WV Wed., July 27, 2016 • Chicago, IL Thurs., July 28, 2016 • Chehalis, WA Fri., July 29, 2016 • Denver, CO Thurs., August 4, 2016 • Orlando, FL Tues., August 16, 2016 • Springfield, MO Wed., August 17, 2016 • Tipton, CA Wed., August 17, 2016 • Columbus, OH Thurs., August 18, 2016 • Williston, ND Fri., August 18, 2016 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., August 13, 2016 For: Monthly Public Auction • Riverside, CA Sat., August 20, 2016 For: Monthly Public Auction • Portland, OR Thurs., August 25, 2016 For: Public Consignment Auction • Sacramento, CA Sat., September 10, 2016 For: Monthly Public Auction BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY July 6, 2016 • ONLINE ONLY July 13, 2016 • ONLINE ONLY July 20, 2016 • ONLINE ONLY July 27, 2016 • ONLINE ONLY August 3, 2016 DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., September 17, 2016 For: Construction Equipment • Prospect, CT Sat., December 3, 2016 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540 • Philadelphia, MS July 20 - 21, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS September 14 - 15, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS November 16 - 17, 2016 For: Huge 2-Day Public Auction
Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Sealy, TX Thurs., July 14, 2016 For: Heavy Machinery, Equipment & Truck Auction
J. STOUT AUCTIONS www.jstoutauction.com 360-567-8154 • Portland, OR Wed., July 27, 2016 For: Heavy Equipment & Commercial Truck Auction
J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Lansing, MI Sat, July 16, 2016 For: Heavy Vehicles & Equipment • South Beloit, IL Sat, July 23, 2016 For: Heavy Vehicles & HESS AUCTIONEERS Equipment www.hessauctioneers.net 866-511-2493 • Charlotte, NC Thurs., July 28, 2016 • Marietta, PA For: Heavy Vehicles & Fri., August 26, 2016 For: Truck, Trailer & Equipment Equipment • Shrewsbury, MA • Marietta, PA Sat, August 6, 2016 Fri., October 14, 2016 For: Truck, Trailer & Equipment For: Heavy Vehicles & Equipment • Marietta, PA • Philadelphia, PA Fri., December 9, 2016 For: Truck, Trailer & Equipment Sat, July 20, 2016 For: Heavy Vehicles & Equipment • Salt Lake City, UT HOUSBY AUCTIONS Thurs., August 25, 2016 www.housby.com For: Heavy Vehicles & 866-218-6266 Equipment • ONLINE ONLY • Rome, NY July 13, 2016 Sat, July 27, 2016 • ONLINE ONLY For: Heavy Vehicles & July 27, 2016 Equipment • ONLINE ONLY August 10, 2016 JAMES G. MURPHY INC. AUC• ONLINE ONLY TIONEERS August 31, 2016 www.murphyauction.com 800-426-3008 • ONLINE ONLY September 14, 2016 • Kent, WA Thurs., July 7, 2016 • ONLINE ONLY For: Tri-State Construction, Inc. September 28, 2016 • Sutherlin, OR • ONLINE ONLY July 13 - 14, 2016 October 12, 2016 For: Sawmill Equipment & Supplies • ONLINE ONLY October 26, 2016 • Kenmore, WA Sat., July 30, 2016 For: Heavy & Contractors HUNYADY AUCTION COMPANY Equipment & Vehicles www.hunyady.com • Kenmore, WA 800-233-6898 Sat., October 1, 2016 • Souderton, PA For: Heavy & Contractors Wed., July 20, 2016 For: Surplus Liquidation Rorvik Equipment & Vehicles General Contracting, LLC • Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 JEFF MARTIN • Foley, MN AUCTIONEERS, INC. Fri., September 9, 2016 www.jeffmartinauctioneers.com For: Heavy Equipment 601-450-6200 • Foley, MN • Brooklyn, MS Fri., December 2, 2016 August 5 - 6, 2016 For: Heavy Equipment For: Early Fall Public Auction HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA July 28 - 30, 2016 For: Summer Construction, Truck & Farming Equipment
IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Houston, TX Tues., September 20, 2016 For: Unreserved Public Auction
JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Villa Rica, GA Wed., September 21, 2016 For: Heavy Equipment Auction
K-BID www.k-bid.com 866-301-KBID
ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668
• ONLINE ONLY June 30 – July 12, 2016 For: NCS Brown Excavating Liquidation 2016
• Denver, CO Wed., July 13, 2016 For: Construction Equipment
MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Pelzer, SC Thurs., September 29, 2016 For: Construction Equipment, Trucks, Trailers & more McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., July 12, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., August 9, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., September 13, 2016 For: Tractor, Farm & Construction Equipment PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Griswold, CT Fri., July 8, 2016 For: Complete Dispersal Auction P&J Tire and Auto, LLC • North Franklin, CT August 5 - 6, 2016 For: Major Public Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., July 14, 2016 For: Construction Equipment • ONLINE ONLY Thurs., July 21, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., July 28, 2016 For: Construction Equipment QUAKER CITY AUCTIONEERS INC. www.quakercityauction.com 215-426-5300 • ONLINE ONLY July 6 - 15, 2016 For: Multi-Contractor Auction
• Denver, CO Wed., September 14, 2016 For: Construction Equipment • Denver, CO Wed., November 9, 2016 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Seneca Falls, NY August 11 - 12, 2016 For: Trucks, Large Construction Equipment & more STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online Auction July 6 - 13, 2016 For: Ag, Construction Equipment, Trucks & more • Litchfield, MN Tues., July 26, 2016 For: Secured Party Construction Auction • West Fargo, ND Wed., August 3, 2016 For: Aglron West Fargo Event TIM WEAVER AUCTION SERVICE www.auctionzip.com 717-354-9524 • Palm, PA Fri., July 8, 2016 For: Stonewood Contracting Liquidation Auction UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., August 26, 2016 For: Construction, Utility & Forestry Equipment WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., September 17, 2016 For: Construction Equipment, Truck & Trailer Auction • Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990
RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395
• Ashland, KY Thurs., July 7, 2016 For: Construction Equipment
• Lebanon, TN Sat., September 10, 2016 For: Construction Equipment
• Ashland, OH Thurs., September 22, 2016 For: Construction Equipment
• Lebanon, TN Sat., December 3, 2016 For: Construction Equipment
• Darlington, PA Thurs., November 17, 2016 For: Construction Equipment
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 97
JULY JUL L Y 14 77044 044 INTERSTATE INTERSTATE 10 10 . SSEALY, EALY, Y TTXX
S Scan can for for more more iinformation nformation
HEAVY HEAV VY Y MACHINERY, MA MACH CHINERY, EQUIPMENT EQUIPMENT A AND ND TRUCK TRUCK AUCTION AU A UCTION online or in person. Bid
equifyauctions.com equifyauctions.com (979) (979) 987-6205 987-6205 ofc ofc ((979) 979) 32 320-0274 0-0274 fax fax
See current inventory and details at eequifyauctions.com quifyauctions.com T The he d deadline eadline ffor or eequipment quipment d delivery elivery ffor or tthe he aauction uction iiss July July 6. 6. EEarly arly rregistration egistration and and p reviewing o quipment aand nd ttrucks rucks w ill b egin o n July July 8 previewing off eequipment will begin on 8.. T ext EQ UIFY to 25827 25827 for for the the latest latest aauction uction inf ormation. Online Online bid ding Text EQUIFY information. bidding ZLOO DOVR EH RIIHUHG IURP RXU ZHEVLWH 2Q VLWH ½QDQFLQJ RIIHUHG DV ZHOO ZLOO DOVR EH RIIHUHG IURP RXU ZHEVLWH 2Q VLWH ½QDQFLQJ RIIHUHG DV ZHOO W e are are now now accepting accepting quality quality consignments. consignments. P lease m ake plans plans to to We Please make participate. We’d We’d love love to to have have you. you. participate. E EQUIPMENT QUIPMENT A AUCTIONS UCTIONS + COMMERCIAL COMMERCIAL LENDING LENDING + C COMMERCIAL OMMERCIAL IINSURANCE NSURANCE + A APPRAISALS PPRAISALS Jodi Amaya T X LIC 16537
Page 98 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Brett Johnson of Vertical Earth, Cumming, Ga., takes one last spin on this John Deere 650J dozer before the auction.
Nine-year-old Caden Morehead stayed up later than his dad, James of Complete Demolition Services, Carrollton, Ga., researching machines and compiling his own binder of information for the Ritchie Bros. sale.
Stephen Fairley, Fairley Construction, Hattiesburg, Miss., tests out this Komatsu PC210LC excavator.
Ritchie Bros. Holds Unreserved Auction in Atlanta, Ga.
M
ore than 2,200 bidders participated online and in person at Ritchie Bros.’ multi-million dollar unreserved public equipment auction in Atlanta, Ga., on June 21. Bidders came from more than 45 countries, including 47 states. Approximately 67 percent of the equipment in the auction was sold to out-of-state buyers, from as far away as France, Thailand and New Zealand. Online bidders purchased approximately 47 percent of the equipment sold (by dollar value). More than 1,650 equipment items and trucks were sold in the auction, including 45 skid steers, more than 40 excavators, 20 dozers, 140 truck tractors, 130 trailers and more. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Vernon Dorminey (L) and Gary Loudermilk, both farmers based in Carnesville, Ga., look for a bargain on a mid-sized dozer.
CEG
Gary (L) and Kenny Bryant, both of Gary Bryant Enterprises, Burnsville, N.C., operate this John Deere 700J LGP dozer.
Johnny Bateman (L), Bateman Forest Products, Gay, Ga., and Keith Reems of Lanier Equipment, Lula, Ga., look over a late-model John Deere 843K feller buncher.
Craig Zoellner Jr. (L) and Craig Zoellner, both of Piedmont Paving, Newnan, Ga., look over the selection of dozers in the sale.
Zac Shepherd (L) and Dustin Underwood of SHP Mine Group, Alpharetta, Ga., are interested in this Cat 252B skid steer loader.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 99
www.IronPlanet.com 1.888.433.5426
Page 100 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
HUGE 2-DAY PUBLIC AUCTION Selling All Types of Construction Equip., Heavy-duty Trucks, Trailers, Farm Tractors, Logging Equip., Support Equip., Vehicles & More
Wednesday, July 20th & Thursday, July 21th • 9am 1042 Holland Ave • Philadelphia, Mississippi 39350
Phone: 601.656.9768 • Fax: 601.656.0192 10% Buyers Fee on the first $4500 of each lot and then a 1% Buyer Fee on the remaining balance of each lot.
Consignments are Now Being Accepted for this HUGE 2-Day Auction. CALL TODAY !! 2011 Volvo G930
2014 Cat D5K2 LGP Selling on Day 1 B ".;.9+24; %9<,3 %9*,;79: B 6;C4 "97$;*9 %9<,3 %9*,;79 B *,3 )& %9<,3 %9*,;79 B C426.9 7976*-7 $ %9<,3 %9*,;9: B *,3 & %9<,3 %9*,;79 B C426.9 $ %9<,3 %9*,;79: B .6>79;1 % %9<,3 %9*,;79: B *,3 %9<,3 %9*,;79 B ".;.9+24; %9<,3 %9*,;79 B 6;C4 2 %9<,3 %9*,;79: B .6>79;1 ( .*=@ *<4 %92 *?4. %9<,3 %9*,;79: B *,3 %" %92 *?4. <58: B *,3 ' %92 *?4. <58 %9<,3 B 925:76 4*-2*;79 "<58.9 #.:,<. 29. %9<,3: B 9.201;426.9 *9+*0. %93: B <;7,*9 )8.-2;79 () *9+*0. %93: B 6;C4 4*;+.- %9<,3 B %*4+.9; C .;*,1 7>+7@ B ;6@9. 4*,3 *>3 .;*,1 7>+7@ B %9*243260 % $;.8 .,3 %9*24.9 716 ..9. ( %9*,;79 716 ..9. ( %9*,;79 716 ..9. ( %9*,;79: <+7;* ( %9*,;79: 1*44.60.9 % ( %9*,;79 1*44.60.9 % ( %9*,;79 .> 744*6- % $ ( %9*,;79 44 $.44260 ;76 %9<,3: "2,3<8: '.12,4.: %': ;;*,15.6;: 2:,
Selling on Day 2 *; " 7A.9 B 716 ..9. 7A.9 75*;:< " 7A.9 75*;:< " ?,*=*;79 B
75*;:< "
?,*=*;79
75*;:< " ?,*=*;79 7+.4,7 $ ?,*=*;79 B 7+,*; ?,*=*;79 %*3.<,12 % # ?,*=*;79 B 716 ..9. ?,*=*;79 B B
B B B B B B
'74=7 '74=7 *;
7;79 9*-.9 7;79 9*-.9 7;79 9*-.9:
*; 7;79 9*-.9 9.::.9 7;79 9*-.9 1*58276 7;79 9*-.9 '74=7 !// #7*- %9<,3 75*;:< ( 7*-.9 *:. 7*-.9 *:. 7*-.9 716 ..9. ?;.6-*17. *;
$32- $;..9 <4,1.9
B
$' "7:2;9*3 "% $32$;..9 <4,1.9 B 7+,*; % $32- $;..9 B B
7+,*; *;
$32- $;..9 $32- $;..9
(1 of 2) 2007 Mack CTP713 2007 Cat 287C
Phone: 601.656.9768
Fax: 601.656-0192
1042 Holland Ave (PO Box 1248) • Philadelphia, MS 39350 Philadelphia, MS 39350
Auctioneers: Donnie W. Dean, MS Lic. 733 & Wes Dean, MS Lic. 1322
B
2011 Komatsu PC200LC-8 %*3.<,12 % $32- $;..9
B
%*3.<,12 %
B B
2;,1>2;,1 $ (*43 +.126- $32- $;..9 <+7;* & # % 262 ?,*=*;79 '74=7
B
7+,*;
B
*;
B
$32- $;..9
#
262 ?,*=*;79 262 ?,*=*;79
# 262 ?,*=*;79
<+7;* ) 6;.6:<: '
262 ?,*=*;79 '2+9*;79@ 758*,;79
B
*; ' %*6-.5 9<5 #744.9 60.9:744 #*6- $% %*6-.5 9<5 #744.9 B *@ 79 $ 9775 $3@;9*3 %.4.:,782, 79342/; 97-.9:76 *99@ .,3 9*6. B 6;C4 %9*6:;*9 $.9=2,. %9<,3 B 79( .,1*62,: %9<,3: B 267 .,1*62,: %9<,3 B $;.94260 <.4 <+. %9<,3 B $;.94260 (*;.9 %9<,3 B *,3 # $ (*;.9 %9<,3 #.@674-: " 29; "*6: ,76 @*9- 29; "*6
This is only a partial list of highlighted items for the huge 2-day auction. Check our website for a full listing. www.deancoauction.com
John Deere 5085E MFWD
bid live ONLINE
BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.
Construction Association of Michigan (CAM) The mission of Construction Association of Michigan is to provide service, information and assistance to the construction industry. The Association exists to foster growth in the construction industry and encourage networking between members and their publics. CAM will act as a catalyst to promote and enhance profitability, efficiency and integrity within the industry for the benefit of association members. For further information: Website: http://www.cam-online.com; Email: marketing@cam-online.com; Address: 43636 Woodward, Bloomfield Hills, Michigan 48302; Phone: 248/972-1000. Michigan Construction News Coming Events: July 13, Wednesday – Michigan Infrastructure & Transportation Association, 2016 Metro Detroit Golf Outing, Twin Lakes Golf Club, Oakland Township. Contact: MITA, 517/347-8335. July 19, Tuesday – Construction Association of Michigan, Golf Outing, Links of Novi. Contact: CAM, 248/972-1000. July 27-31, Wednesday-Sunday – Michigan Infrastructure & Transportation Association, 2016 Summer Conference, Crystal Mountain Resort, Thompsonville. Contact: MITA, 517/347-8335. August 16, Tuesday – Construction Association of Michigan, Golf Outing, Fieldstone Golf Club, Auburn Hills. Contact: CAM, 248/972-1000. August 20, Saturday – Woodward Dream Cruise, “Cruise Into CAM,” CAM HQ, West Bloomfield. Contact: CAM, 248/972-1000. September 20, Tuesday – CAM Fall Sporting Clays, Hunters Creek Club, Metamora. Contact: CAM, 248/972-1000. AGC Safety & Health Conference Wednesday, July 27, 2016 to Friday, July 29, 2016 District of Columbia OAIMA (Ohio Aggregates & Industrial Minerals Association) The Ohio Aggregates & Industrial Minerals Association is the trade association in Ohio that represents all of the state’s mining operations except coal. OMMEP GOLF OUTING – July 18, 2016 – 9:00 AM to 11:00 AM For more information, please contact OAIMA at 1-800.OH.ROCKS or 614/4287954. Fax: 614/428-7919. STAFDA – Specialty Tools & Fasteners Distributors Association Welcome to STAFDA! STAFDA is an international educational association comprised of distributors, manufacturers, rep agents, and affiliates (trade press) serving the construction/industrial market. We have 2,500 members from across the globe and have been serving the Construction & Industrial Channel since 1976. UPCOMING EVENTS: STAFDA’s 40th Annual Convention & Trade Show Atlanta, GA November 6 – 8, 2016 Georgia World Congress Center Registration materials will be mailed to members the third week of June. You must be a member to attend! STAFDA has a series of training manuals, along with benchmarking surveys, and over 65 different programs to serve your needs! We encourage you to explore our website and learn more! STAFDA 500 Elm Grove Road – Suite 210 – P. O. Box 44 – Elm Grove, Wisconsin 53122 Phone: 800/352-2981 or 262/784-4774 Fax: 262/784-5059 Info@STAFDA.org TDWI Seminar in Boston 2016 Wednesday, July 27, 2016 to Friday, July 29, 2016 Questions? info@tdwi.org Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ July 24-26, 2016 – APTA Sustainability & Public Transportation Workshop The 2016 APTA Sustainability & Public Transportation Workshop is scheduled for July 24-26, 2016, at the Westin Austin Downtown, 310 E. 5th Street, Austin, TX. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ August 14-16, 2016 – State Public Transportation Partnerships/Transit Midwest Conference The 2016 State Public Transportation Partnerships/Transit Midwest Conference is scheduled for August 14-16, 2016, at the Westin Crown Center, 1 E. Pershing Road, Kansas City, MO. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ August 28-31, 2016 – APWA Public Works Expo The 2016 APWA Public Works Expo (PWX) takes place on August 28-31, 2016 at the Minneapolis Convention Center, Minneapolis, MN. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ September 11-14, 2016 – APTA Annual Meeting The 2016 APTA Annual Meeting is scheduled for September 11-14, 2016, at the JW Marriott Los Angeles L.A. Live, 900 W. Olympic Boulevard, Los Angeles, CA. ASSOCIATED TRAINING SERVICES NEW FACILITIES GRAND OPENING DATE: FRIDAY, JULY 15, 2016 TIME: 9 AM to 3 PM FREE LUNCH 11 AM Why Attend This Event? See New Facilities and Training Grounds JCB, Case Construction, Terex Cranes, Manitou, Mazella Sponsored Classrooms Meet ATS Training and Management Staff Talk With Our Business Development Department Establish New Partnerships Ask About Our Specialized Training Options Meet with Equipment Manufacturers and Dealers Equipment Dealers and Manufacturers Will Be On Hand Recruits ATS Graduates For Your Company ATS Students and Graduates Will Be Available ASSOCIATED TRAINING SERVICES – OPEN HOUSE 7132 Elder Lane, Corner of HWY 151 & HWY VV SUN PRAIRIE, WI 53590 Dan Swiggum, 605/354-0721 www.operator-school.com TOWMASTER TRAILERS & TRUCK EQUIPMENT & EDUCATION EXPO Minnesota Municipal & Government Agencies and Plow Contractors Join us for the 2016 TOWMASTER TRAILERS & TRUCK EQUIPMENT & EDUCATION EXPO FREE!!! DATE: TUESDAY, JULY 12, 2016 TIME: 7:30 AM to 2:30 PM Factory Tours; Product Demonstrations; Truck Displays; Indoor Product Displays; Trailer Displays; Equipment Displays; Food & Prizes; Education Sessions: 7:45 AM – Force America SSC5100EX Operation; 8:45 AM - Force America SSC6100 Operation; 9:45 AM – KMI 3 Step Asphalt Repair. Registration required online at towmastertruck.com. TDWI Seminar in Dallas, TX 2016 DATA MINING AND PREDICTIVE ANALYTICS DATES: Monday, JULY 11; Tuesday, JULY 12; Wednesday, JULY 13; Thursday, JULY 14 SEMINAR LOCATION: Renaissance Dallas Hotel 2222 N Stemmons Fwy Dallas, TX 75207 MONDAY, JULY 11: TDWI Analytics Fundamentals TUESDAY, JULY 12: TDWI Predictive Analytics Fundamentals WEDNESDAY, JULY 13: TDWI Data Visualization Fundamentals THURSDAY, JULY 14: Hands-on Data Mining
If you register to become a Premium Member of TDWI at the time of your seminar registration, you can attend at TDWI Premium Member rates. Please contact us at 425/277-9201 or registration@tdwi.org. All non-member registrations for three or more days include a one-year TDWI Premium Membership. You may, however, decline Premium Membership on the registration form. TDWI Seminar in Salt Lake City, UT 2016 BUSINESS ANALYTICS DATES: Monday, JULY 25; Tuesday, JULY 26; Wednesday, JULY 27; Thursday, JULY 28 SEMINAR LOCATION: University Guest House & Conference Center 110 S Fort Douglas Blvd Salt Lake City, UT 84113-5036 MONDAY, JULY 25: TDWI Analytics Fundamentals TUESDAY, JULY 26: TDWI Predictive Analytics Fundamentals WEDNESDAY, JULY 27: TDWI Data Visualization Fundamentals THURSDAY, JULY 28: Data Storytelling: The New Horizon in Business Analytics If you register to become a Premium Member of TDWI at the time of your seminar registration, you can attend at TDWI Premium Member rates. Please contact us at 425/277-9201 or registration @tdwi.org. All non-member registrations for three or more days include a one-year TDWI Premium Membership. You may, however, decline Premium Membership on the registration form. NLICA – The Nebraska Land Improvement Contractors Association NEBRASKA LICA CONSTRUCTION EXPO & FIELD DAY Plan to Attend the 2nd Nebraska LICA Construction Expo and Field Day. DATE: THURSDAY, JULY 28, 2016 TIME: 9:00 AM to 5:00 PM SITE LOCATION: 18060 OLD CHENEY ROAD, WALTON, NE 68461 *Directions from Lincoln, NE: Travel East on US-34 E. Turn Right onto S 148th Street. Turn Left onto Old Cheney Road. THIS EVENT IS FREE TO THE PUBLIC!!! Contractors will have the opportunity to access multiple associates at once, with hands-on testing of equipment and the chance to see the latest innovations and products related to the industry. NLICA associate members are encouraged to participate in this event. For more information on this event, contact Nancy Dvorak, Event Coordinator at 402/693-2517 or nancy@prussexcavation.com. For additional information, you may also visit www.NELICA.org. 2016 National LICA SUMMER MEETING Missouri Land Improvement Contractors (MLICA) is hosting 2016 National LICA Summer Meeting CELEBRATING 75 YEARS OF STEWARDSHIP! DATES: JULY 19-23, 2016 PLACE: INTERCONTINENTAL HOTEL KANSAS CITY at the PLAZA 401 Ward Parkway KANSAS CITY, MO For more information contact 866/856-9717 or go to www.kansascityic.com. APWA PWX CONFERENCE 2016 DATES: AUGUST 28th – 31st, 2016 PLACE: MINNEAPOLIS, MINNESOTA The American Public Works Association (APWA) PWX Conference will be held from August 28th through August 31st, 2016 in Minneapolis. The PWX Conference was formerly known as the APWA Congress. The event is a networking and educational opportunity for public works professionals. If you would like more information on this Conference or if you have a question for the APWA-MN Chapter, kindly contact the APWA-MN Chapter by mail: APWA-MN Chapter, PO Box 27965, Golden Valley, MN 55427; TOLL FREE: 1-888-4072650. Associated General Contractors of Minnesota (AGC of Minnesota) AGC of MINNESOTA SUMMER QUARTERLY MEETING WHEN: WEDNESDAY, JULY 13, 2016 WHERE: KITCHI GAMMI CLUB DULUTH, MINNESOTA CONTACT: Denise Woods dwoods@agcmn.org Phone: 651/796-2186 AGC OF MINNESOTA AGC OF MINNESOTA GOLF TOURNAMENT WHEN: FRIDAY, AUGUST 5, 2016 WHERE: STONEBROOKE GOLF CLUB 2693 CO RD 79 SHAKOPEE, MN 55379 CONTACT: DENISE WOODS DWOODS@AGCMN.ORG 651/796-2186 REGISTRATION IS AVAILABLE JUNE 2016. AGC OF MINNESOTA AGC OF MINNESOTA SPORTING CLAYS FUNDRAISER WHEN: MONDAY, AUGUST 29, 2016 WHERE: MINNESOTA HORSE AND HUNT CLUB 2920 E 220TH STREET PRIOR LAKE, MN 55372 CONTACT: DENISE WOODS DWOODS@AGCMN.ORG 651/796-2189 REGISTRATION IS AVAILABLE JULY 2016. Registration Open for 2016 Offsite Construction Expo SEPTEMBER 21 and 22 in Washington, DC Registration is now open for the 2016 Offsite Construction Expo. There is simply no greater opportunity to reach key partners in the offsite construction industry. The Offsite Construction Expo (OSCE) will feature exhibits from offsite construction contractors, traditional contractors that have integrated offsite methods, offsite factories, transportation companies, architects, engineers, BIM suppliers, materials suppliers, and consultants of all types of offsite construction processes. Additionally, eight case studies will be presented on the hour on the expo floor. Questions about this event??? Event staff can be contacted by phone: 434/202-8180 or e-mail: info@hardimanwilliams.com. Event Location: Walter E. Washington Convention Center, 801 Mt. Vernon Place, NW, Washington, D.C. 20001. Phone: 202/249-3000. SIXTH ANNUAL SHALE INSIGHT TM CONFERENCE 2016 SHALE INSIGHT TM 2016 ENERGIZED WITH REGIONAL OIL & GAS PARTNERSHIP MSC, OOGA, WVONGA partnership advances stronger industry voice and collaboration Pittsburgh, PA / Columbus, OH / Charleston, W.VA. – The Marcellus Shale Coalition (MSC), the Ohio Oil and Gas Association (OOGA) and the West Virginia Oil and Natural Gas Association (WVONGA), are pleased to announce a joint partnership to host the Sixth Annual Shale Insight TM Conference. This industryleading event will take place in the heart of the Marcellus and Utica Shale Gas Plays on September 21 and 22, 2016 at the David L. Lawrence Convention Center in Pittsburgh, PA. In addition to several keynote presentations, the conference will feature daily educational sessions exploring various technical and public affairs-related topics. Registration is now open, offering special member and early bird rates. A variety of sponsorships offering comprehensive entitlements are available, including general session presentations, luncheons, networking events and other branding and marketing opportunities. for more information and to register for the conference, visit shaleinsight.com. WORLD DEMOLITION SUMMIT 2016 . Demolition event moves to the USA for the first time . Online registration is now open for event, taking place on 14 October, 2016 . Deadline for entries to World Demolition Awards is 30 June, 2016 An international line-up of expert speakers has been confirmed for this year’s World Demolition Summit (WDS), which takes place in Miami, Florida on 14 October – its first time in the USA. The Summit, always previously held in Europe, is established as one of the major annual international events for the demolition industry. More information and online registration is available at the conference website: www.khl.com/wds. Companies are also encouraged to enter the 2016 World Demolition Awards, which are the most prestigious awards for the worldwide demolition industry, judged by a panel of independent experts. There are 11 categories and the awards are free to enter. The deadline for entries is Friday, 30 June. The entry forms can be downloaded from the event website at www.khl.com/wds.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 101
Page 102 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Euro Auctions USA Hosts Another Successful Auction
E
Ben Fernandez (L), BenZach Contractors, Marietta, Ga., and Raul Fernandez, Zacscabe Farms, Butler, Ga., look over some of the compactors in the sale lineup.
David Betts (L) of Euro Auctions U.S.A. and Jesus Ramirez of Vesco Tractors, Gadsden, Ala., watch the bidding.
Dean Knuckles of Knuckles Enterprises, Pineville, Ky., intends to buy this Cat 740 articulated truck during the Euro Auctions sale.
uro Auctions USA held another successful auction at its permanent facility in the Atlanta suburbs of Newnan, Ga., on June 21. The sale consisted of a nice variety of construction equipment, including late-model backhoe loaders, asphalt compactors and hydraulic excavators, some of which were unused machines with the seats and controls still wrapped in plastic from the factory. A nice turnout of registered bidders made their way to the sale as well as a substantial presence of bidders online. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
(L-R): Will Eubanks, Cope Equipment, Jasper, Ga.; Ben Hopkins, Ben Hopkins LLC, Jasper, Ga.; Skip Walker, High Hills Equipment, Ellijay, Ga.; and Luke and Gary Copeland, Cope Equipment, talk about the machines about to go on the auction block.
Cindy Baxter (L) and H.C. Hare, both of 157 Hardware, Cullman, Ala., shop the inventory of the mid-sized excavators about to roll across the auction ramp.
Kevin Roberts (L) and Jesse Roberts, Fairburn, Ga., look over a Hitachi EX75UR.
Tom Powell (L), Lowbird Outdoors, Atlanta, Ga., and Brent Beverly, BTM Machinery, Charleston, S.C., are ready for the bidding to begin.
Ed Knight, auctioneer, finds one last bid before dropping the gavel on another piece of equipment.
Ben Hopkins of Ben Hopkins LLC, a site prep and utilities contractor based in Jasper, Ga., tests out a Komatsu PC138US.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 103
Unreserved public equipment auctions Fast, flexible leasing & financing available – up to 100%, $0 down
2007 Caterpillar 972H | Manchester
2011 John Deere 750J LT | Elkview
2011 Case 590SN 4x4 | Manchester
2 of 3 – John Deere 700J LGP | Elkview
2008 Caterpillar 321DLCR | Manchester
2008 Caterpillar 272C XLS 2 Speed | Manchester
Peterbilt 378 4000 Gallon | Elkview
2 – Caterpillar TH350B 6600 Lb | Elkview
Equipment includes
Bid in person or online
wheel loaders, crawler tractors, loader backhoes, crawler pipelayers, hydraulic excavators, skid steers, tanks trucks, telescopic forklifts & much more
▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration
Financing & leasing available Up to 100% financing, with no money down.
Manchester, NH Elkview, WV Jul 26 (Tue) 9 am
Jul 27 (Wed) 9 am
Location
Location
39 Hackett Hill Road, Hooksett, NH
2454 Little Sandy Rd, Elkview WV
More items added daily Call about selling: 603.268.0517
More items added daily Call about selling: 304.965.5815
See complete listings at rbauction.com Auctioneers: Frederick R. Vilsmeier Lic # 6065, Gregory S. Fuqua Lic # 3078, Kevin L. Perry License # 1763, James L. Valentine License # 1764
Page 104 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Iron Peddlers Hopes to Recapture Its Customer Base IRON from page 28
transmissions, they are all rebuilt on site. Although this is a new branch, the company is not new to this type of work. Anthony’s father Tommy Broome, and his business partners, Art Cates and Jim Birchfield founded the company in 1974, and Anthony joined the company in 1995. He pointed to some of the company’s founding principles as the key to its success, including saving customers money, and always following up with customers. “We are hoping to recapture our customer base that we had built over the last 30 years,” said Broome. “We are seeing a lot of growth in Greenville/Spartanburg, and we also
(L-R) are Anthony Broome, Corey McCain and Paul Stokey.
The Iron Peddlers location in Buford, Ga.
are seeing Atlanta come back due to the surge in the construction business. We are a viable source of used equipment parts, used equipment, and this keeps our customers coming back to us.” Broome also said his staff is a major source of the company success. The company has 40 to 50 employees overall. Don Moore is the parts salesman of the Buford branch. He has been in the used parts sales business for many years. “We are fortunate that our people have stayed
with us through the hard times and the good times,” said Broome. “We feel like a family, and I think that is why we have kept all our good people.” Iron Peddlers has parts operations in London, Ky., Savannah Ga., Buford Ga., and the company’s main office is in Monroe, N.C. For more information, visit ironpeddlers.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
New Agreement…
SC&RA Elects 2016-2017 Officers Proxibid, John Deere Dealers During Annual Conference Team Up to Syndicate Sale Items Proxibid and John Deere announced an agreement that allows John Deere dealers to quickly and easily syndicate equipment for sale to the Proxibid and eBay Marketplaces. John Deere dealers leveraging the M.A.X. (Multiple Advertising eXchange) to manage and list inventory across multiple platforms can now share listings to the Proxibid and eBay Marketplaces, allowing dealers to expose their inventory to more than 157 million buyers from 190 countries across the globe who regularly purchase farm and agriculture equipment. This seamless experience gives John Deere dealers a competitive edge when selling their used equipment, according to the company. Proxibid’s online Marketplace offers flexible transaction methods, making it easier than ever for sellers to reach a broad buyer base. In February 2015 the company entered into a partnership with eBay whereby equip-
ment listings in the Proxibid Marketplace are syndicated to the ecommerce giant’s marketplace, making that inventory accessible to its 157 million global buyers. “This partnership is significant for Proxibid, as it makes a substantial volume of high quality equipment available to our buyers,” said Ryan Downs, president and CEO of Proxibid. “We are delighted to be aligned with one of the world’s most trusted and recognized brands, and welcome all John Deere dealers to the Proxibid Marketplace.” More than 2,500 pieces of John Deere equipment are now available for sale in the Proxibid Marketplace, with more added daily. For more information, visit www.proxibid.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
During its 2016 annual conference, April 26 to 30, at the Hilton Bonnet Creek, Orlando, Fla., the Specialized Carriers & Rigging Association (SC&RA) elected John McTyre, McTyre Trucking, Orlando, Fla., as president. Joining McTyre as officers for the 2016-2017 term are: • Chairman Bruce Forster, Rigging Gear Sales, Dixon, Ill. • Vice President: Terry Young, Construction Safety Experts, Cary, N.C. • Treasurer: Delynn Burkhalter, Burkhalter, Columbus, Miss. • Assistant Treasurer: Gary Stang, Anderson Trucking Service, St. Cloud, Minn. Also joining the board are four newly elected group chairs: • Allied Industries Group: Ben Forster, Riggers Manufacturing, Dixon, Ill. • Crane & Rigging Group: Ted Redmond, NCSG Crane & Heavy Haul, Edmonton, Alberta, Canada • Transportation Group: J. Rozum, MSA Delivery Service, Canton, Mich. • Ladies Group: Jeannie Montgomery, Intermountain Rigging & Heavy Haul, Salt Lake City, Utah The newly-elected officers will serve one-year terms that will expire at the association’s next annual conference, to be held April 18 to 22 at the Westin Kierland Resort, Scottsdale, Ariz. Additionally, SC&RA elected the following six new board members to serve three-year terms: • Alan Ashlock, Maxim Crane Works, Orlando, Fla. • Peter Juhren, Morrow Equipment Company, Salem, Ore. • Rob Weiss, Cranes, Inc., Maspeth, N.Y. • Chris Easter, Keen Transport, New Kingstown, Pa. • Ray Morgan, Perkins Specialized Transport, Northfield, Minn. • Dave Wittwer, Hays Companies, Salt Lake City, Utah
(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 105
New Interface…
Purple Wave Announces Site Enhancements Purple Wave Auction announced an improved user experience to its website. The new interface offers a guided search with robust technology delivering instant results, with item counts, so users can quickly and easily find what they are looking for, according to the company. Once they have logged in, users can easily keep track can all the items that they are bidding on, watching or selling. For more information, visit www.purplewave.com or email auction@purplewave.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Visit CEG’s Web Site at www.construction equipmentguide.com
UPCOMING AUCTION 2-DAY MAJOR PUBLIC EQUIPMENT AUCTION With Equipment From
BTB CONSTRUCTION, INC., CREAN EQUIPMENT, INC., JACOR, INC. & OTHER AREA CONTRACTORS, HEAVY EQUIPMENT & TRUCK DEALERS & RENTAL COMPANIES 275 ROUTE 32, NORTH FRANKLIN, CT 06254
FRIDAY, AUGUST 5, 8:30 AM EXCAVATION, CONSTRUCTION, COMPACTION, PAVING, CRUSHING & SCREENING EQUIPMENT, HEAVY & MEDIUM DUTY TRUCKS, TRAILERS, FLEET VEHICLES
SATURDAY, AUGUST 6, 8:30 AM GENERAL & BUILDING CONTRACTOR EQUIPMENT, AG, LANDSCAPE, MANUFACTURING, LAWN & GARDEN, JOBSITE SUPPORT EQUIPMENT, TOOLS & SUPPLIES Currently Accepting Quality Consignments VISIT OUR WEBSITE FOR MORE INFORMATION, TERMS & CONDITIONS ONLINE BIDDING THROUGH EQUIPMENTFACTS Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100 Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888
275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900
www.petrowskyauctioneers.com
To Enter This Giveaway: 1 Click the Register Now banner at www.BuyJMAOnline.com 2 Register online or live for any of our auctions held June 1–August 1, 2016
NEW! w
arranty ith Full W
1-844-450-6200 www.BuyJMAOnline.com MSAL 1255, SC 4283, AL 5287, FL AU4483, TX 17188, LA 1756 NC 9730, VA 2907004240, GA AUNR004103, KYRP3843 See Website For Full Terms and Conditions
Find us on social media!
Page 106 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ADVANCE TIRE ........................................................................................60 ALL ERECTION & CRANE RENTAL..........................................................15 ASC CONSTRUCTION EQUIPMENT USA ............................................2,3 ATI CORPORTATION/LEVEL-BEST ..........................................................33 B & D FABRICATORS ................................................................................34 BAIR ..........................................................................................................36 BARGAINS ................................................................................................94 BELL TRUCKS AMERICA INC ..................................................................40 BENCH MARK TOOL & SUPPLY ..............................................................10 BLANCHARD MACHINERY INC ..........................................................12,87 BOBCAT COMPANY ..................................................................................39 BOMAG ......................................................................................................44 BROOKS SALES INC ................................................................................22 BUTLER MACHINERY ..............................................................................30 CASE CONSTRUCTION ............................................................................79 CEG SCALE MODELS ..............................................................................90 CLASSIFIEDS ............................................................................................94 CLEVELAND BROTHERS EQUIPMENT CO ......................................18,19 COMPANY WRENCH ................................................................................21 CONEXPO..................................................................................................35 CONSTRUCTION EQUIPMENT GUIDE BACKHOES & ATTACHMENTS PROMO ........................................56 WANTED ..........................................................................................95 FELLING EW SLEEPER & MIDCO TESTIMONIAL........................List AUCTION TRIPLE BUY ..................................................................101 DEANCO AUCTION & SALES CO INC PHILADELPHIA MS ........................................................................100 DITCH WITCH SE DEALERS ..............................................................54,55 EMPLOYMENT OPPORTUNITY................................................................87 EQUIFY AUCTIONS LLC SEALY TX..........................................................................................97 FECON ......................................................................................................33 FLAGLER CONSTRUCTION EQUIP LLC..................................................11 FLANGE LOCK ..........................................................................................32 FLUID CONTROL SERVICES....................................................................24 G S EQUIPMENT ........................................................................................9 GENSCO EQUIPMENT LTD ......................................................................34 GOMACO CORP ........................................................................................48 HALE TRAILER BRAKE & WHEEL ..........................................................23 HILLS MACHINERY COMPANY ..............................................................108 HITACHI CONSTRUCTION MACHINERY ............................................88,89 HYDREMA U S INC....................................................................................31 HYUNDAI CONSTRUCTION EQUIPMENT ..............................................83 INTERNATIONAL IRON ............................................................................25 IRONPLANET ............................................................................................99 JCB INC ................................................................................................60,61 JEFF MARTIN AUCTIONEERS INC ........................................................105 JFW EQUIPMENT INC ..............................................................................46 JOHN DEERE ............................................................................................71 JOHN DEERE SKID STEER ......................................................................41 JRE/GEOMETRY GLOBAL ..........................................................................5 KAWASAKI - KCM ......................................................................................59
KOBELCO CONST MACH AMERICA LLC ................................................37 KOMATSU AMERICA CORP ................................................................63,73 KUBOTA SVL ........................................................................................92,93 LAWRENCE EQUIPMENT ......................................................................107 LEEBOY ................................................................................................46,47 LIEBHERR CONSTRUCTION EQUIPMENT ............................................69 LINK-BELT MID ATLANTIC ........................................................................14 MAY HEAVY EQUIPMENT ........................................................................13 MOBRO MARINE INC................................................................................17 MWI PUMPS ..............................................................................................33 NATIONAL ATTACHMENTS ......................................................................30 NPK CONSTRUCTION EQUIPMENT INC ................................................27 OKADA AMERICA ......................................................................................30 PETROWSKY AUCTIONEEERS INC NORTH FRANKLIN CT ..................................................................105 PINNACLE CENTRAL CO..........................................................................22 POWERSCREEN ......................................................................................38 PROFILE PUBLICATIONS ........................................................................42 RANSOME EQUIPMENT SALES LLC/LRH ..............................................95 RAYCO ......................................................................................................32 RING POWER CRANE ..............................................................................12 RITCHIE BROS. AUCTIONEERS MANCHESTER, NH / ELKVIEW, WV ............................................103 ROAD BUILDERS MACHINERY................................................................86 ROADTEC ..................................................................................................45 ROSCO MFG CO ......................................................................................52 SAKAI AMERICA INC ................................................................................49 SDLG ........................................................................................................6,7 SOLESBEES EQUIP & ATTACHMENTS ..................................................20 SULLIVAN PALATEK ..................................................................................26 TAKEUCHI ............................................................................................76,77 THE IRONPEDDLERS ..............................................................................20 THUNDERCREEK......................................................................................29 TRACTOR TRACS INC ..............................................................................86 TRAMAC CORP ........................................................................................30 TREKKER TRACTOR ................................................................................16 TRENCH SHORING SERVICES................................................................36 VOLVO COMPACTION ..............................................................................53 VOLVO CONSTRUCTION EQUIPMENT ..................................................65 WACKER NEUSON....................................................................................85 WILCOX TRACTOR SALES INC ..............................................................24 WIRTGEN AMERICA ............................................................................50,51 YANMAR AMERICA ..................................................................................91 GEORGIA SUPPLEMENT BOBCAT OF ATLANTA ................................................................................9 CENTRAL ATLANTA TRACTOR ..................................................................3 COWIN EQUIPMENT CO INC ....................................................................5 HEAVY MACHINES INC ..............................................................................2 REYNOLDS-WARREN EQUIPMENT CO ..................................................11 TRACTOR & EQUIPMENT CO INC ..........................................................12 YANCEY BROTHERS CO ........................................................................6,7
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 6, 2016 • Page 107
Page 108 • July 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CASE 921F WHEEL LOADER MORE TONS PER TANK. CASE F Series wheel loaders have what it takes to get more done with less. Powerful engines with SCR technology deliver maximum performance while maintaining lower temperatures and improving fuel economy by as much as 20%. See how our efficiency helps your operation at CaseCE.com/FSeries.
Call Today for a Demo. OPERATING WEIGHT: 43,777 lb | 19,857 kg ENGINE POWER: 225 HP | 168 kW
www.hillsmachinery.com
Quality Used Equipment from Hills Machinery
SPECIAL RESIDUAL LEASE PROGRAM ON TEREX | FINLAY SCREENS
SPECIAL FAIR MARKET VALUE LEASE PROGRAM ON BELL ARTICULATED TRUCKS**
2014 B30E’s
2015 B30E’s
As Low As $2,700 Per Month
As Low As $5,200 Per Month
2013 CASE TR320 COMPACT TRACK LOADERS 3 UNITS AVAILABLE W/OROPS, ELECTRIC/HYDRAULIC CONTROLS, BUCKET W/BOE
CT2590, 1015 HRS ........................................$33,020 **Rate based on 1500 hours per year operation with satisfactory credit approval by CT2668, 1070 HRS ........................................$31,830 lessor. Hours shown are subject to change. CT2861, 793 HRS ..........................................$31,740
2014 MODEL 684
2014 MODEL 883
As Low As $3,845 Per Month
As Low As $4,873 Per Month
2015 MODEL 863
2015 MODEL 883
As Low As $3,712 Per Month
As Low As $4,952 Per Month
North Carolina Greenville 415 Belvoir Hwy Greenville, NC 27834 Phone 252-752-7145
PEN!
NOW O
Greensboro 2901 Manufacturers Rd.. Greensboro, NC 27406 Phone 336-308-3045
2014 CASE 921F WHEEL LOADER, 2176 HRS, CAB, A/C, HEAVY DUTY AXLES, 23.5 RADIALS, 4.75 CY 2012 CASE 621F WHEEL LOADER, 2516 HRS, CAB, BUCKET W/BOE, RIDE CONTROL, TELEMATICS .......... A/C, JRB COUPLER, 2.5 CY BUCKET, NEW 20.5X25 TIRES ............................................$104,400 OR RENT ..........................................CALL FOR PRICE OR RENT
PEN!
South Carolina Raleigh 1501 Hedingham Blvd. Raleigh, NC 27604 Phone 919-746-7938
Charlotte 11717 Reames Road Charlotte, NC 28269 Phone 704-208-5564
Columbia 1014 Atlas Way Columbia, SC 29209 Phone 803-658-0200
Charleston 7168B Cross County Road North Charleston, SC 29418 Phone 843-225-9377
NOW O
Greenville 11 Dixie Circle Greenville, SC 29605 Phone 864-546-5208
www.hillsmachinery.com