Published Nationally ®
Southeast Edition $3.00
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
www.constructionequipmentguide.com
May 25, 2016 • Vol. XXIX • No. 11 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
Inside
Spending on Construction Rises in March
ment services. “The demand for on-campus housing has surpassed what we have been able to accommodate, and we’ve had to put students up in hotels for several years.” Originally designed to face McKenzie Arena, the more than 231,000-sq. ft. (21,460 sq m) complex was ultimately positioned in the opposite direction, in order to bring new energy to Vine Street. Located on the corner of Vine and Houston, the project will offer two stories of underground parking beneath the facility, adding 196,000 sq. ft. (18,208 sq
Construction spending increased by 8 percent in March compared to a year earlier and also was up slightly between February and March amid growing demand for many types of construction, as the spending total hit the highest level since October 2007, according to an analysis by the Associated General Contractors of America. Association officials said the growth comes amid strong private-sector demand and new federal investments in surface transportation programs. “Construction should be a significant contributor to economic growth in the remainder of 2016 and beyond,” said Ken Simonson, the association’s chief economist. “Right now the biggest challenge for contractors in many parts of the country is that they are worried about finding enough qualified workers to meet demand.” Construction spending in March totaled $1.138 trillion at a seasonally adjusted annual rate, 0.3 percent higher than the revised February total and 8.0 percent higher than in March 2015, Simonson said. Private residential spending increased by 1.6 percent for the month and 8.5 percent compared to 12 months earlier. Spending on multifamily residential construction jumped 5.6 percent for the month and 34.6 percent year-over-year, while single-family spending was flat compared to February but rose 13.4 percent compared to March 2015.
see UTC page 90
see BUDGET page 87
The Water Campus to Rise on 35 Acres...8
UTC University Relations photo
Construction continues at a steady pace at The University of Tennessee at Chattanooga (UTC), with work under way on new living quarters that will house 600 students. Benchmark Tool & Supply Expands...18
Complex to Meet Demands of Tenn.’s Fastest Growing Campus By Cindy Riley CEG CORRESPONDENT
Top Guns Come Out for James Ri ver Eve nt.. .24
Table of Contents ................4 Truck & Trailer Section ........ ......................................39-42 Attachment & Parts Section ......................................44-49
Construction continues at a steady pace at The University of Tennessee at Chattanooga (UTC), with work under way on new living quarters that will house 600 students. UTC officially broke ground on the $70 million West Campus Housing Complex in November 2015. “For the past decade, UTC has been the fastest growing campus in Tennessee,” said Yancy Freeman, assistant provost of enroll-
Session Sets Stage for Fight on Road Funding
Recycling Section ........53-71 By Andrew DeMillo ASSOCIATED PRESS
Business Calendar ............82 LITTLE ROCK, Ark. (AP) No
Auction Section ............86-97 matter what happens when Advertisers Index ..............98
Arkansas lawmakers meet to take up the governor’s highway funding plan, one thing is clear: This won’t
be the end of the debate over how to pay for the state’s road needs. With time running out to build consensus and an election year climate that makes tax hikes a tough sell, the special session that begins May 19 will likely focus on a shortterm plan to tap into Arkansas’ sur-
plus and general revenue for roads. But it also will offer a preview of the challenges lawmakers face later in trying to come up with a longerterm solution to close the road funding gap. “I know the desire is there,’’ House Speaker Jeremy Gillam
said. “The biggest hurdle we face in the timeframe we’re in right now is there are a lot of ideas out there to reach those goals, but they’re all very complex.’’ Hutchinson hasn’t yet issued the formal proclamation calling lawsee ROADS page 92
Page 2 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
A FULL SO SOLUTIONS LUTIONS PROVIDER PROVIDER F FOR OR TH THE E PAVING INDUSTRY RY PAVING INDUSTR The industry’ ustry’’s leading commercial pavers and street sweepers are now backed with the experience and close customer support of ASC Construction Equipment.
CP75 C P75 A N NEW EW ST STANDARD TA ANDARD F FOR OR C COMMERCIAL OMMERCIAL P PA PAVING AVING ccarlsonpavingproducts.com arlsonpavingproducts.com
ASC is committed to providing quality service and heavy equipment solutions with over 55 years of experience and locations in Georgia, North Carolina, South Carolina, and T Tennessee, ennessee, put them to work for you. Count on ASC Construction Equipment to have the best service and solutions to your unique needs—with a full line of Stewart-Amos mechanical broom regenerative air units and Carlson paving products.
ascvolvo.com as cvolvvo.com EFFECTIVELY EFFECTIVEL ECTIVEL LY SI SIMPLE MPLE *ASC is not the Carlson dealer for NC
stew stewart-amos.com art-amos.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 3
GEORGIA Buford 678.318.9500 Savannah 912.964.8079
SOUTH CAROLINA Nor th Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060
NORTH CAROLINA A sheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710
TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845
You’re serious about getting your bonus. And your crew thanks you. Our line of pavers and compactors sets the standard for reliable asphalt paving. We have a long histor y of proven technology and a reputation for industr y-leading innovation. When it comes to ma ximizing your earnings, these machines deliver. See smar t in action at volvoce.com/smar troads.
ascvolvo.com
Smartt W Smar Works. orks.
Page 4 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
sOuTheAsT edITIOn
In ThIs Issue
®
Circulated Throughout
Founder, Publisher & CEO Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Main office
8
18
62
To r e a d t he s e s t o ri e s a nd ma ny m o re , v is it w w w . co n s t r u ct io ne q uipm e nt g uid e . co m
specIAl secTIOn 53 RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling,
Toll Free Fax Web site Editorial e-mail Advertising e-mail
25 SOUTH CAROLINA HAS SPENT ABOUT $40M SINCE
THE WATER CAMPUS TO RISE ON 35 ACRES ALONG MISSISSIPPI
Toll Free Fax e-mail
32 AFTER DELAYS, NEPAL BEGINS RECONSTRUCTION
Contact
TAX TO PAY FOR ROAD CONSTRUCTION
OF QUAKE-DAMAGED HERITAGE SITES
10 DBIA NAMES VDOT 2016 TRANSPORTATION
34 H&E HOSTS GRAND OPENING AT ITS NEW GREENVILLE BRANCH Nearly 490 customers, manufacturer representatives, employees, neighboring businesses and H&E Equipment Services executives attended H&E’s Greenville, S.C., grand opening celebration.
Toll Free Fax e-mail Contact
Toll Free Fax e-mail Contact
18 BENCHMARK TOOL & SUPPLY MAKES MAJOR EXPANSION INTO VA. A major market expansion is under way for Benchmark Tool & Supply, the North Carolina-based equipment distributor known for its high-quality service to the construction, engineering, surveying and agricultural industries.
62 CAROLINA CAT DEMONSTRATES REBEL CRUSHER’S ABILITY TO PRODUCE FOUR SCREENED PRODUCTS Carolina CAT held a Rebel Crusher product demonstration event on May 10. Approximately 60 people from 25 area contractors attended the event.
Toll Free Fax e-mail
Mobile
20 TEXAS-BASED COMPANY CREATES JOBS, NEW MARKET IN MISS. Texas-based auctioneers Machinery Auctioneers, has completed the renovation and is preparing for its first big auction in Batesville, Miss.
equIpmenT 39 MACK mDRIVE HD transmission 66 KPI-JCI K300/6203CC Crushing and Screening Plant
22 MAY HEAVY EQUIPMENT EXPANDS PRESENCE IN EASTERN NORTH CAROLINA May purchased Tar Heel Machinery, a company that itself had grown to be one of the Raleigh area’s top equipment dealers.
24 TOP GUNS COME OUT FOR JAMES RIVER EQUIPMENT SKEET SHOOT James River Equipment held a customer appreciation skeet shooting event on May 11 at the Hunting Creek Preserve in Harmony, N.C.
www.constructionequipmentguide.com
editorial@cegltd.com production@cegltd.com
A proposed gasoline tax increase to pay for road and bridge construction cleared its first hurdle in the Alabama Legislature on March 17.
Nepal’s prime minister announced on April 25 the start of reconstruction of key heritage sites in and around the capital that were damaged by an earthquake that killed nearly 9,000 people and devastated the country one year ago.
OWNER OF THE YEAR
215/885-2900 800/523-2200 215/885-2910
Kent Hogeboom National Sales Manager 315/866-1423 800/988-1203 315/866-1379 khogeboom@cegltd.com
Construction of the more than 1.5 million sq. ft. (1.2 million sq m) of labs, research facilities and commercial space will allow thousands of researchers to study coastal threats, formulate theories and arrive at solutions that might never be reached by working alone.
The Design Build Institute of America (DBIA) recognized the Virginia Department of Transportation (VDOT) as Transportation Owner of the Year at the DBIA Design-Build in Transportation Conference in Charlotte, N.C.
470 Maryland Drive Fort Washington, PA 19034
Toll Free Fax e-mail
A newspaper reports that South Carolina has paid about $40 million since 2010 to settle road claims and lawsuits against the Transportation Department, with much of that money going to settle cases involving damages caused by potholes.
For advertising rates Contact
32 ALABAMA COMMITTEE APPROVES GAS
8
Edwin M. McKeon Sr. Richard C. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
Richard C. McKeon •North & South Carolina•Tennessee •Virginia 704/553-8888 800/288-4234 704/553-8899 rmckeon@cegltd.com
2010 TO SETTLE ROAD CLAIMS
crushing and screening.
feATures
•Alabama •Arkansas •Florida •Georgia •Louisiana •Mississippi •North Carolina •South Carolina •Tennessee •Virginia •Puerto Rico •Virgin Islands
70 JCB Contractor Breakers
depArTmenTs 82 BUSINESS CALENDAR 84 CLASSIFIEDS 86 COMING AUCTIONS
Rich Olivier •Alabama •Arkansas •Georgia •Mississippi •Tennessee •Florida Panhandle 770/443-3174 800/409-1479 770/443-3176 rolivier@cegltd.com Jim Van Natta •Florida •Virgin Islands •Puerto Rico 407/365-5720 800/344-3026 407/366-3192 jvannatta@cegltd.com Dale Agnew •Louisiana 877/877-4997 972/719-2611 dagnew@cegltd.com
YouTube
Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 5
Page 6 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
HAS YOU COVERED www.powerequipco.com
FROM ASPHALT TO DIRT . . . . . AND EVERYTHING IN BETWEEN.
INTELLIGENT DOZERS
INTELLIGENT EXCAVATORS
First time renter???
Receive a 20% discount!! www.certifiedrental.com
800.997.7530
Etnyre
Fecon
K-Tec Earthmovers
Waratah
Leeboy
Hensley
JRB
Atlas Copco
Broce Broom
Versatile
CSI
Quadco
Rockland
Waldon
Genesis
Doppstadt
Wacker
Komatsu Forest
Kobelco Cranes Montabert
Bateman
Barko
Hultdins
AL-JON Compactors
Hydrema
Rotobec
Young
Knoxville Branch 3300 Alcoa Hwy. Knoxville, TN 37920 865.577.5563
Nashville Branch 1290 Bridgestone Pkwy. LaVergne, TN 37086 615.213.0900
Powerequipmenteer_everythinginbetween_10_13_15_djw
Chattanooga Branch 4295 Bonny Oaks Drive Chattanooga, TN 37406 423.894.1870
Kingsport Branch 1487 Rock Springs Road Kingsport, TN 37664 423.349.6111
Solesbee
Memphis Branch 3050 Ferrell Park Cove Memphis, TN 38116 901.346.9800
Felling Trailers
Saltillo, MS Branch 1545 Highway 45 Saltillo, MS 38866 662.869.0283
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 7
FLORIDA Davie 5210 Reese Rd. Davie, FL 33314 P: 954.581.4744
Ft. Myers 5151 Dr. Mar tin Luther King, Jr. Blvd. F t . M ye r s , F L 3 3 9 0 5 P: 239.481.8554
Jacksonville 8750 Philips Hw y. Jacksonville, FL 32207 P: 904.737.6000
Lake City 5 3 9 S W A r r ow h e a d T Te err. L ake Cit y, FL 32024 P: 3 86.758.7444
Miami (E xpor t s Par t s Facilit y) 6144 NW 74th Ave. Miami, FL 33166-3710 P: 305.477.2442
Orlando 9601 Boggy Creek Rd. Orlando, FL 32824-8728 P: 407.850.9614
Tampa 8418 Palm River Rd. Taampa, FL 33619 P: 813.630.0077
Some companies have you choose power or fuel efficiency. You chose both.
Volvo developed the industr y’s first fuel efficiency guarantee so you never have to compromise on per formance or productivity. And with CareTrack machine monitoring, you can focus your attention on more impor tant things — like growing your business. Get the details aatt volvoce.com/smartfuel.
flaglerce.com
Page 8 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Water Campus to Rise on 35 Acres Along Mississippi By Cindy Riley CEG CORRESPONDENT
Developing over the next decade and beyond, The Water Campus will rise on 35 acres along the Mississippi River, next to downtown Baton Rouge, La. Construction of the more than 1.5 million sq. ft. (1.2 million sq m) of labs, research facilities and commercial space will allow thousands of researchers to study coastal threats, formulate theories and arrive at solutions that might never be reached by working alone. “The Water Campus promotes an environment of shared resources and relationships, creating a new knowledge economy,” said Tina Rance, director of marketing of Commercial Properties Realty Trust. “With a wide range of partners and potential tenants, this collaborative environment will advance the study and applied science of water research for the international community. This presents a unique and compelling opportunity to assert a prominent global role for the city of Baton Rouge, the state of Louisiana and all campus partners in addressing the critical issues that the world faces around water.” The Water Campus is under construction in the Nicholson Corridor, a major artery that is targeted as a growth area under East Baton Rouge’s comprehensive plan. On one end of this corridor is downtown. On the other is Louisiana State University. The boundaries of the campus are from Nicholson Drive to the river and I-10 to Oklahoma Street. A modern tram is now in the pre-development phase, with the anticipated line running from downtown to The Water Campus, and onward to LSU. More than $50 million has been committed by partners, including the state of Louisiana, for developing the first phase of what will be an international destination for leading minds in science, engineering and other specialties. The Water Campus will attract thousands of people, all working together in an effort to understand and better manage the complex relationship between water, land, and people around the globe. Officials are working with local municipalities, as well as the state, on the endeavor. Construction is phased, and infrastructure is crucial. Phase I infrastructure includes street lights, electrical lines, water lines, fiber, railroad crossings and electrical vehicle charging stations, according to Rance. “The first building under construction is the LSU Center for River Studies, which is a $16 million, 90 by 120 foot small scale physical model of the lower Mississippi River. Two hundred computerized panels will simulate water movement along our coastline.
Antunovich Associates Inc. rendering
A rendering of The Water Campus.
The Lemoine Company photo
“There are roughly 1,400 cubic yards of concrete that went into the foundation and slab, along with 205 concrete piles driven to 50 feet below grade,” said Tyler Tramonte, vice-president of estimating of Baton Rouge-based general contractor Stuart and Company.
Scientists from around the world can use the LSU lab to replicate effects on the water bodies of their homelands.” The Center was the first building to begin construction on The Water Campus. At the February groundbreaking, Louisiana Gov. Bobby Jindal told reporters, “We’re taking another step forward in making The Water Campus a reality. This project is a concept we joined together to announce just over a year ago. The creation of the Center for River Studies embodies the principles on which The Water Campus was founded, which are to equip our best and brightest with the skills they need to help us
further our work to protect and restore our coast. “This facility provides a venue for researchers, scientists, engineers and citizens to work together to advance solutions to challenges facing coastal Louisiana. The work conducted at this Center will generate scientific strategies that will protect our coastal communities and help us preserve coastal Louisiana for our children and generations to come.” The Center for River Studies will house the expanded small scale physical model, one of the largest moving bed physical models in the world. The state-of-the-art model is based on exact parameters of the river’s physical and kinetic properties, producing a degree of accuracy never before achieved in lower-river physical modeling. Designed to simulate the Mississippi River’s depth, sediment and flow, the physical model will be used in conjunction with computer modeling to make informed decisions about the best way to sustain coastal Louisiana. The Center also will include an interactive exhibit center focused on the achievements and advancements of the coastal program. According to Tyler Tramonte, vice-president of estimating of Baton Rouge-based general contractor Stuart and Company, one of the biggest construction challenges involves the size of the property. “The building and paving take up the entire property limits. There is also another building going up about 30 feet from our building. The roof, along with the exterior sheathing and waterproofing, are currently going on, as the building is reaching the dried-in stage.” Tramonte, said, “The building structure is
erected, and we are putting on roofing and exterior waterproofing. The interior finishes are still remaining, along with the models and audio/visual systems.” The property consisted of a grass lot with a few trees that had to be removed. The land was previously used for a multifamily complex. Work on the structure began in February of 2015, and is expected to be complete by this summer. The model is reportedly constructed of high-density foam panels that can be reshaped using a computer numerical controlled router. The model is being fabricated by an outside vendor off site, and has to be trucked to the building and set in place and moved with a jib crane and an overhead beam crane. Roughly 8,650 cu. yds. (6,613 cu m) of dirt are being exported and/or imported on the project. “The slab is sitting on roughly 1,900 tons of limestone acting as a capillary barrier to prevent ground water,” said Tramonte. “There are roughly 1,400 cubic yards of concrete that went into the foundation and slab, along with 205 concrete piles driven to 50 feet below grade.” Unfortunately for crews on site, there was an eight-month work stoppage, due to the rising water level of the Mississippi River. As mandated by the Army Corp of Engineers, once the river reaches a certain height, no below grade work — no digging of any sort — can be done within 1,500 ft. (457.2 m) of the levee. “This scenario occurred before we were able to get the building foundation built, preventing the progress of the project and causing the delay until the river level recessed,” said Tramonte. Tramonte said the most time-consuming part of the work will be the exterior façade. “It is very tedious and detailed work, as it has five different types of metal panels, decorative block and decorative exterior sunshades at the large windows.” Tommy Dauzat, AIA, Mougeot Architecture, said the primary concern for the creative team was accurate coordination of the intricate systems required within. “The design of the building not only had to properly facilitate the function of the model, but it also had to account and provide provisions for its delicate installation. Providing a clean separation of public and private realm, while still allowing the patrons the opportunity to view and become part of the research, was an inviting challenge, as well.” The building is primarily a two-story structure clad in a series of panels and burnished block. “The 50,000 square-foot building itself is see WATER page 88
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 9
Link-Belt X4 Excavators
Parts for Any Make, Any Model
Call the location nearest you today! When you need us, where you need us Tampa
Tallahassee
Jacksonville
Orlando
Fort Myers
Pompano Beach
Equipment • Parts • Service
www.gsequipment.com
Page 10 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NEW UNUSED EXCAVATORS
2007 KOMATSU D65PX-15EO, 4843 2004 DYNAPAC CA2502D, 2200 HRS, 2002 KOMATSU PC200LC-7, 8900 HRS, HRS, 70% U/C, CAB, A/C, MULTI 84” SMOOTH, CUMMINS POWER, 36” GP BKT 50% PLUS U/C, GOOD SHANK RIPPER, EXCELLENT VERY GOOD CONDITION..........$33,500 CONDITION. ............................$42,500 CONDITION ............................$102,000 ADDITIONAL EQUIPMENT
COMPLETE SET OF BLS TUF PADS, PART # SF350 FOR CAT D4KXL 85 TO 95% WEAR REMAINING........................ NEW COST $9,000; BLOW OUT $4,000
1978 CAT 120G, REBUILT ENGINE, NEW PAINT, 50% RUBBER, GOOD COND ..................$29,500
Guy Roof 2091 Bishop Rd. • Greensboro, NC 27406
336-382-9715 2015 NEW UNUSED SANY SY135C, AUX. HYD. BLADE, 36” BKT, ISUZU DIESEL. IN STOCK FOR IMMEDIATE DELIVERY, 1 YR 1,500 HR POWER TRAIN & HYD. WARRANTY....................$89,500
2006 Cat 315CL, 8892 HRS 36" CAT BKT & CAT 2008 VOLVO EC210CL, 7750 HRS, 60% PLUS PROGRESSIVE LINK HYD. THUMB 50% PLUS U/C VERY DRY & TIGHT VERY GOOD COND .... U/C, 48” BKT, PROGRESSIVE LINK, HYD. ................................................................$65,000 THUMB, VERY GOOD COND ..................$69,900
cecarolinasinc@aol.com Free Delivery within 200 Miles!
DBIA Names VDOT 2016 Transportation Owner of the Year The Design Build Institute of America (DBIA) recognized the Virginia Department of Transportation (VDOT) as Transportation Owner of the Year at the DBIA Design-Build in Transportation Conference in Charlotte, N.C. “VDOT is a leader in design-build and strives to continue its commitment to the program,” Commissioner Charles Kilpatrick said. “The designbuild process is a means to deliver transportation projects faster and more efficiently than traditional methods, while also contributing to economic growth and development in the commonwealth.” DBIA’s Transportation Owner of the Year Awards recognize transportation industry organizations that have made significant contributions in advancing the awareness, understanding and use of the design-build project delivery method. In the design-build method of project delivery, contractors and design consultants form an integrated team to assume the responsibility for design and construction. This single point of responsibility typically results in increased innovation and faster project delivery than VDOT was named DBIA Transportation Owner of the Year. (L-R, seated) are Garrett Moore PE, chief engineer; Charlie the traditional VDOT-designed and contractor-built Kilpatrick, PE, commissioner; Mohammad Mirshahi, PE, deputy chief engineer. (L-R, standing) are members of VDOT’s Alternate Project Delivery Team: Stephen Kindy, PE; Suril Shah, EIT; Bryan Stevenson, PE; Jeffrey Roby, PE; method. The number of design-build projects has steadily DBIA, Shailendra Patel, PE; DBIA, John Daoulas, PE; Jeff Hetzer, Joseph Clarke, PE, DBIA. increased since VDOT first began using the delivery method in 2004. Currently, there are 29 design-build projects Committee, comprised of design-build professionals and Leadership-Awards.aspx. (This story also can be found on Construction in progress, valued at $1.17 billion, which represents 54 per- industry experts from across the country. For more information, visit Equipment Guide’s Web site at www.constructionequipcent of its total contract value of $2.16 billion. Award winners are selected by DBIA’s Transportation http://www.dbia.org/awards/Pages/Transportation- mentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 11
May Heavy Equipment Get More Done
866-629-3784 Columbia, Charleston, Lexington, NC At May Heavy Equipment, we’ re devoted to helping you get more done. By providing the tools needed for construction, mining and more since 1997, we’ ve grown to become the Southeast’ s reliable source for heavy equipment rentals, sales, parts and service.
FUEL MATTERS • Fleetmatic Remote Management • Powered by Mercedes Benz Diesel Engines • Efficient Allison Automatic Transmissions
Best Fuel Efficiency www.belltrucksamerica.com
Strong Reliable Machines, Strong Reliable Support
866-629-3784 Columbia, Charleston, Lexington & Raleigh
In the Industry!
Page 12 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hyundai Excavators & Wheel Loaders
Built to Perform • Backed by Atlantic Equipment & Supply
Before you buy give Hyunda i a try.
BUILT TO PERFORM
PACKED WITH VALUE
SALES • RENTALS • PARTS • SERVICE
2201 Mingee Dr • Hampton, VA 23661 www.aeandsupply.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 13
CHOOSE A CAT MACHINE. CHOOSE YOUR DEAL. ®
0.9%
FOR SIXTY MONTHS*
$4,800
OR
+
REBATE ON YOUR TRADE-IN** $1,000
MINI EXCAVATOR
COMPACT TRACK LOADER
MULTI TERRAIN LOADER
COMPACT WHEEL LOADER
$12,400
$9,500
$7,900
$12,800
KELLLY TRACTOR CO.
RING POWER CORPORA ORPORA ATION TION®
www.kellytractor.com 305-592-7184 Miami • Davie • West Palm Beach Clewiston • Fort Myers
catrental.ringpower.com 888-748-7464 Jacksonville • St. Augustine • Lake City • Tallahassee • Ocala • Tampa Daytona Beach • Lakeland • Brooksville • Sarasota • Palm Bay • Orlando
THOMPSON TRACTOR CO. www.thompsontractor.com 850-785-4007 Crestview • Panama City • Pensacola
*Offer valid from February 1, 2016 2016 to to June June 30, 30, 2016 2016on onselect selectnew newmodels, models,financed financedby byCat CatFinancial, Financial,manufactured manufacturedby byCaterpillar CaterpillarInc. Inc.Building BuildingConstruction ConstructionProducts ProductsDivision. Division.Offer Offeravailable availableonly onlyatatparticipating participatingCat Catdealer dealers. dealer s. Offer is available to customers in the USA and Canada only and cannot be combined combined with with any any other other offers. offers.Offer Offersubject subjectto tomachine machineavailability availability. availability. Machines sold in Canada by authorized dealers are priced in Canadian dollars and the price may take into account the ex exchange change rate of Canadian dollars to U.S. dollars. Models shown here do not necessarily reflect the exact exact model model and and configuration configuration to towhich whichthe thepromotion promotionapplies. applies.Offer Offertrade traderebates rebatesare arebased basedon onaapredetermined predeterminedamount amountand andmay mayvary varybybymodel. model.Rebate Rebatewill willbebeininaddition additiontoto the the dealer dealer appraised trade-in value. All financed machines are subject to credit approval and rate may differ based based on on creditworthiness. creditworthiness. The The Cat CatFinancial FinancialCommercial CommercialAccount Accountcredit creditapplies appliestotoall allBCP BCPmodels modelsand andisisprovided providedthrough throughCat CatFinancial Financialfor foruse useatatparticipating participatingCat Catdealers. dealers.Prices Pricesdodono not no t include taxes, freight, set-up, delivery delivery,, document fees, inspections, additional options, or attachments. Final machine machine prices prices are are subject subject to tochange. change.Offer Offermay maychange changewithout withoutprior priornotice noticeand andadditional additionalterms termsand andconditions conditionsmay mayapply apply. apply . Contact your Cat dealer for details. © 2016 Caterpillar All rights reserved. CA CAT, T, CA CATERPILLAR, ATERPILLAR, TERPILLAR, their respective logos, “Caterpillar YYellow,” Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpi Caterpillar llar and may not be used without permission. www.cat.com www.cat.com www.caterpillar.com www.caterpillarr.com
Page 14 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 15
The Worldwide Leader in Concrete Paving Technology Announcing Our New Distributor in Arizona
info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347
ARROW EQUIPMENT
BLANCHARD MACHINERY
GREGORY POOLE
Serving Western North Carolina (800) 277-2080 CarolinaCat.com
Serving South Carolina (800) 922-2790 BlanchardMachinery.com
Serving Eastern North Carolina (800) 447-3112 GregoryPoole.com
Page 16 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 17
Page 18 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Benchmark Tool & Supply Makes Major Expansion Into Va. By Eric Olson CEG CORRESPONDENT
A major market expansion is underway for Benchmark Tool & Supply, the North Carolina-based equipment distributor known for its high-quality service to the construction, engineering, surveying and agricultural industries. Benchmark offers a wide range of products in partnerships with several prominent OEMs, such as Caterpillar, Komatsu and John Deere, but is perhaps best known for selling the hugely popular Topcon Positioning Systems portfolio of products. Topcon’s precision devices are prized by contractors everywhere, but coupled with Benchmark’s impeccable sales and service, the dealership’s customers have two highly trusted names on whom they can depend. Broadening Its Market Until recently, Benchmark has served customers throughout North Carolina, upstate South Carolina and a small portion of eastern Virginia. Now, the company has decided to widen its market range to include the entire state of Virginia, according to Chuck Harris Benchmark president. That includes the lucrative and always-growing northern Virginia suburbs of Washington, D.C. Currently, Benchmark is opening locations in Richmond and Chesapeake, with some sub-distribution in the southwestern area of the state. Harris said that his company will bolster its efforts along the I-95 corridor, but will eventually open a full-service dealership in the Roanoke area. “We feel like we are well prepared to enter the Virginia market, with the presence already of several major accounts that we have serviced for the past few years,” he said. “We have a very good infrastructure built within our organization with strong talent. Our plan is to leverage their abilities to propel and really grow the technologies in the Virginia region.” He added that the reasons behind the expansion in the Old Dominion State had a lot to do with the demand for their
Benchmark offers a wide range of products in partnerships with several prominent OEMs, such as Caterpillar, Komatsu and John Deere, but is perhaps best known for selling the hugely popular Topcon Positioning Systems portfolio of products
products and services there. Precision construction, agriculture and civil engineering, as well as every offshoot of those industries, also are seeing big growth in all three states that Benchmark serves. An Innovative Product Line Harris describes Topcon as a very proactive company in the development of precision equipment and sees its product line as essential tools for any successful construction firm in the 21st century. “Time is money in construction and Topcon products have
proven to be very innovative, which increases efficiency,” he said. “And we have been able to show our customers exactly that with these tools.” Harris’ construction customers, for example, will typically have that “Ah-hah!” moment when Benchmark can prove to them the production increase they are getting on a daily basis. “For example, if you double your daily production numbers in an accurate manner, the value of the product becomes pretty evident,” Harris said. “Another way to look at it is see BENCHMARK page 76
“Time is money in construction and Topcon products have proven to be very innovative, which increases efficiency,” said Chuck Harris, Benchmark president.
Both of Jimmy Lewis & Son’s Cat dozers are equipped with Topcon MC² systems.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 19
Page 20 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Apollo Acquires AmQuip Crane Rental, Maxim Crane Works Funds managed by affiliates of Apollo Global Management LLC announced that they signed definitive agreements to acquire AmQuip Crane Rental from affiliates of Clearlake Capital Group L.P. and Maxim Crane Works from affiliates of Platinum Equity. Upon the closing of these transactions, Apollo intends to combine Maxim and AmQuip, creating a premier lifting solutions provider with a modern crane rental fleet comprised of more than 1,950 cranes, a comprehensive set of value-added service capabilities and a broad geographic footprint across North America. The proposed transactions are subject to regulatory approval and customary closing conditions. Financial terms of the transactions were not disclosed. Founded in 1967, AmQuip serves more than 6,600 customers through a network of 13 branch locations across 36 states. AmQuip operates one of the youngest crane fleets in the industry with more than 550 units with lifting capacities ranging from 6 to 716 tons (5.4 to 649.5 t). Founded in 1966, Maxim serves more than 7,500 customers through a network of 31 branch locations throughout the United States. The company operates more than 1,400 cranes and is a leading provider of specialized crane and lifting solutions in North America. The combined company will include senior executives from each company, and both the AmQuip and Maxim brands will contin-
ue as part of the combined organization. Maxim’s chief executive officer, Bryan Carlisle, is expected to serve as Chief Executive Officer of the combined business. AmQuip’s Chief Executive Officer, Al Bove, will continue to run the AmQuip operation, serve on the combined company’s leadership team as well as play a senior role in the integration process. “AmQuip and Maxim share similar cultures and values relating to people, safety and the desire to serve the industry,” said Carlisle. “This combination represents an opportunity for us to build a world class organization with the best people in the crane industry. We intend to run the business in the most effective manner possible, utilizing the best practices of both organizations. This partnership will be mutually beneficial to both of our teams and, most importantly, to the customers we serve by providing an enhanced level of service, expertise, equipment and geographic coverage.” “Our companies know each other well with ties that go back more than 30 years,” said Bove. “The teams on both sides throughout each organization are made up of the most experienced lifting solutions experts in the industry, and the ability to work together going forward is exciting for everyone involved.” Larry Berg and Antoine Munfakh, partners at Apollo Global Management, said, “We are tremendously excited by this unique
opportunity to combine two premier businesses in the North American lifting services market. Both Maxim and AmQuip have built exceptional reputations and customer relationships through the depth of their employee talent and their commitment to providing the highest levels of combined organization can deepen and broaden these relationships and better serve its customers’ critical lifting solutions needs. We see many compelling growth and innovation opportunities in the market, and we look forward to bringing Apollo’s resources to bear in helping Bryan and Al achieve their long-term strategic objectives.” Platinum Equity Partner Louis Samson, who led the acquisition of Maxim, said “We are proud of everything Maxim has achieved during our stewardship. The company today is a fundamentally strong business with great leadership, talented employees, sound business practices and all the tools it needs to help lead the industry for years to come. Maxim has proven its ability to successfully grow organically and through acquisition, and now combining forces with AmQuip is a logical and exciting next step.” “We are pleased to have sponsored AmQuip during a period of significant growth and transformation. AmQuip’s foundation as a leader in the lifting solutions market, plus its top-notch safety record and stellar reputation, position the company well for its new partnership with Maxim,” said
José E. Feliciano, founder and managing partner at Clearlake. “We remain strong believers in AmQuip’s vision, people and the tremendous value they bring to this combination.” Barclays is serving as financial advisor to Apollo, Harris Williams & Co. and Oppenheimer & Co. Inc. are serving as financial advisors to AmQuip and Clearlake, and Goldman, Sachs & Co. is serving as financial advisor to Maxim. Paul, Weiss, Rifkind, Wharton & Garrison LLP is serving as legal advisor to Apollo, Stradling Yocca Carlson & Rauth and Cooley LLP are serving as legal advisors to Clearlake, and Latham & Watkins LLP is serving as legal advisor to Platinum Equity. The debt financing for these transactions is being committed to by J.P. Morgan Chase Bank N.A., Wells Fargo, Barclays, and Jefferies Finance LLC, and Cahill Gordon & Reindel LLP and Otterbourg P.C. are serving as their legal counsel. For more information about Apollo Global Management, visit www.agm.com. For more information about Maxim Crane Works, visit www.maximcrane.com. For more information about AmQuip Crane Rental, visit www.amquip.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Machinery Auctioneers…
Texas-Based Company Creates Jobs, New Market in Miss. Texas-based auctioneers Machinery Auctioneers, has completed the renovation and is preparing for its first big auction in Batesville, Miss. There have been nearly a dozen jobs created by the expansion of the company to Mississippi, and economic stimulation will be not far behind. One auction will provide millions in local revenue, and will bring in visitors from all over the country. “We have grown our business exponentially in the past six years by really caring about our clients and our buyers alike. Our goal is to create a marketplace where fair market prices are paid for high quality machinery, and to have both buyer and seller leave satisfied with the price of the machinery,” said Terry Dickerson, Machinery Auctioneers. The Auction on May 24 featured more than 100 big trucks and trailers as well as construction machinery such as backhoes, dozers and forklifts. Most of the machinery
is coming from the depressed oilfield markets in Oklahoma, Arkansas, Louisiana and Texas. Machinery Auctioneers of Mississippi will be led by JB and Trey Dickerson, Terry Dickerson’s son and nephew. Machinery Auctioneers is a locally owned and operated auction service company in Batesville, Miss. Since 2010, Machinery Auctioneers has been helping depressed businesses mitigate financial loss by liquidating and auctioning off their assets. Since its inception, Machinery Auctioneers has sold more than $100 million of equipment, and is the fastest growing auction company in Texas. For more information, visit, www.machineryauctioneers.com, call Jonathan Bunting at 210/648-2225 or email at jonathan@machineryauctioneers.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 21
Page 22 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The company has recently moved from its location at 5423 U.S. Highway 70 Business in Clayton to its new 33,000 sq. ft. (3,065 sq m) facility on 19 acres at 555 Wise Rd., Clayton, N.C.
May Heavy Equipment Expands Presence in Eastern North Carolina By Eric Olson CEG CORRESPONDENT
Since last fall, May Heavy Equipment has enjoyed great success across the whole of North Carolina due to a new acquisition by the highly-respected company. May purchased Tar Heel Machinery, a company that itself had grown to be one of the Raleigh area’s top equipment dealers. With that investment, May was able to expand its market into the Triangle and from there to locales farther east and south of Raleigh. “May was looking for a stronger presence in eastern North Carolina, add some brick-and-mortar locations, as well as some more personnel in this market,” said May’s Scott Woody, general manager of the Clayton location, just outside Raleigh. “They also wanted to be oriented with a company like Tar Heel.” May occupies Tar Heel’s former Clayton dealership, where Woody had been that company’s co-owner and managing member (another Tar Heel store in Reidsville has been closed). Other May locations are in Lexington, N.C. and in Columbia and Summerville, S.C., near Charleston. Besides the Carolinas, May serves customers in Georgia and Virginia, as well. Founded in 1997, the company offers contractors throughout the Southeast every type of earthmoving machinery available. With the purchase of Tar Heel, May currently has approximately 60 employees. May Offers Top-Shelf Lines Part of May’s motivation in acquiring the company,
according to Woody, was because it was looking to add another excavator line and Tar Heel provided that with its inventory of SANY equipment. “A top-shelf excavator line is the basis for any good rental company,” he said. Bringing on the SANY line is part of May’s desire to broaden its inventory and assemble an impressive roster of small, independent manufacturers to offer its customers. That list includes Bell Trucks, Hyundai and Terex Trucks, the dealership’s biggest accounts in the Carolinas. Then there are Bomag compaction equipment, both its line of milling machines and pavers; Kawasaki wheel loaders; and small motorgraders from NorAm. Other smaller equipment makers in May’s yards are IHI, Magnum, Hudson Brothers Trailers, LayMor sweepers and Sakai compaction equipment. Additionally, Terex Trucks’ highly-rated heavy equipment is available to contractors in eastern North Carolina, including its line of articulated trucks. May also carries Link-Belt excavators in 15 counties surrounding Raleigh and Wake County, Woody said. “We can provide anything you would need to rent for any construction project,” Woody said. “There is a large rental fleet here with about 265 machines available right now. We have anything, everything and in large quantities.” He also said he expects to get new Kawasaki loaders, in addition to new Bell Trucks and Terex Truck equipment, delivered to May’s yards in just a few weeks. Happy Customers Are the Key In order to keep his customers satisfied, though, Woody knows the real work on May’s part comes after the deal is done and the contractor takes possession of a piece of equip-
Scott Woody, general manager of the Clayton location, May Heavy Equipment.
ment. “Tar Heel Machinery had always been known for good service, for being personable,” he said. “We had always been a smaller company and that allowed our customers to get to know us on a personal level. Well, May is exactly the same. Even though we are a pretty good-sized corporation now, we aren’t so large that we have lost touch with our customers.” He said May’s customers understand that they are free to see MAY page 87
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 23
7 Ready y. Set. Save on o Kubota’s SVL Series Compactt T Track rack Loader Load s. s
Call Jeremy for Service & Brian for Parts.
704-233-4242 800-443-7569
We Specialize in Quality One Owner & Late Model Machines! REDUCED PRICE
$
Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm
2011 Komatsu WA250-6
3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com
6325 Hrs, ROPS, JRB Q/C with Bucket, Cold A/C
$78,900
0 Down, 0% Financing for 60 6 Months
*
A.P P.R.
2004 Peterbilt 379
Offfer fe ends 6/30/16. GRZQ $ 3 5 ¿QDQFLQJ IRRU XS WR PRQWKV RQ SXUFKDVHV RI QHZ .XERWD 69/ 6HULHV (TXLSPHQW LV DYDLODEOH WR TXDOL¿HG SXUFKDVHUV IUURP SDUWLFLSDWLQJ GHDOHUV¶ LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU ¿QDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH ¿QDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIIHHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ IHU H[SLUHV 6HH XV IRRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZZ NXERWD FRP VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIH IRU PRUH LQIRRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ
kubota.com
© Kubota Trractor rac Corporation, 2016
Cat C15 Engine, 10 Spd Transmission, 40K Rears, 12L Fronts, 11R24.5, Jake Brake, Wet Kit.
$43,900
FAE - 300/SC Stump Cutter
NEW
STUMP CUTTER QUICK SPECS: s #UTTER 7HEEL v X v s #UTTER 7IDTH v s #UTTING $EPTH v s #UTTING (EIGHT v s 1TY #ARBIDE 4EETH s (0 2EQUIREMENT MIN MAX s &LOW '0s 0RESSURE 03) s 7EIGHT LBS TRACTOR QUICK SPECS: s %NGINE *OHN $EERE (& (0 s 5NDERCARRIAGE "ERCO $ OSCILLATING s 4RACK 3HOES ,'0 v s 'ROUND 0RESSURE 03) s (Y 3YSTEM $ANFOSS s 7EIGHT 7 / HEAD )BS
The new 300/SC Stump Cutter is designed and built for prime mover carriers. This powerful attachment tool is equipped with a Danfoss hydraulic motor (51V250) and an aggressive cutting wheel consisting of 36 carbide teeth to power its way through stumps. The frame is designed to operate safely in all environments.
2013 Genie S45 165 Hrs, Deutz Engine. 4WD, Like New Lift. Ready To Work!
$59,900
2005 Sterling Acterra Loaded Down and Ready to work! Cold A/C, Air Brake, Stellar 9620A Crane 8600lbs. 20’ reach, Knapheide Service Bed, Miller Bobcat 250 welder, 115 hrs, Hyd. Outriggers, Hyd. Air Compressor w/Hose Reel
$39,900
2006 GMC Topkick C5500 Duramax, Allison Auto. Trans, 6,000 lbs. Crane, with Wireless Remote, Hyd. Air Comp., Hyd. Outriggers, Good Rubber, Work Ready!
$29,900 FAE USA INC. 2AFE "ANKS $R s /AKWOOD )NDUSTRIAL 0ARK s &LOWERY "RANCH '! 0H s &AX s INFO FAEUSA COM
www.interstateeq.com N. Seymour Dr., Thomson, GA 30824
(706) 595-1550
Page 24 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Top Guns Come Out for James River Equipment Skeet Shoot
(L-R): Steven Warren, Laci McCauley, Nancy Warren, Jerry Warren and Allen Morris, all of C&J Utility in Burlington, N.C., brought their Benelli and Remington 870 and 1100 12-gauge shot guns.
Heading out to the course are Travis DeMetro, T.J. Rademacher, Charles Stuck and Christian Caldwell, all of C.K. Contractors and Development, Kings Mountain, N.C.
James River Equipment held a customer appreciation skeet shooting event on May 11 at the Hunting Creek Preserve in Harmony, N.C. The event was centered around its western North Carolina area customers. The event’s 150 guests were treated to a traditional catered BBQ lunch. The door prizes given away included gift certificates, lawn maintenance equipment, travel bags, coolers and the grand prize was a $900 gift certificate to be used at The Aisle Gun Shop in Mooresville, N.C. The weather was perfect, and everyone enjoyed a pleasant day. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG Taking aim is Mark Ross of Tennoca Construction, see SKEET page 28
Jesse Carpenter (Second from L) of Carolina Grading and Utility, Ashe County, N.C., shows off his shot gun to (L-R) Travis Walters, Carolina Grading and Utility; Jim Roe and Jim Wyatt both of the town of Wilkesboro, N.C.
Enjoying a fun day of shooting (L-R) are Jim Thompson and Steve Bruce, both of Martin Marietta Materials; Paul Ware and Eldon Burgiss, both of James River Equipment; Alec Nations of John Deere; and Scott McEver of NPK.
Asheville, N.C.
Jeff Greene (R) of KRG Utility Inc., Lenoir, N.C., demonstrates the proper technique to score well. His pupils (L-R) are Emerson Crawford, Brian Boyd and Robbie Bald, all of KRG; Greg Beck of James River Equipment; Rob and Marty Greene of KRG; and Allen Felts of James River Equipment.
Part of the day’s activities included a special shooting opportunity, in which almost $2,000 was raised for the Carole M. Archer Memorial Scholarship for Nursing at Appalachian State University. (L-R) are Jeff Fink, James River Equipment; Randy Hall of Eager Beaver Trailers; Marcus Archer, Ronnie Rowe and Mickey Brandle, all of James River Equipment.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 25
704-888-1114 • Fax: 704-888-2377 NOW RENTING EQUIPMENT IN THE CHARLOTTE, NC METRO AREA 1334 Hwy 24/27 Midland, North Carolina sales@wilcoxtractor.com • www.wilcoxtractor.com
1.866.643.1010 ClearSpan.com/ADCEGSE
WE MANUFACTURE t WE INSTALL WE SAVE YOU MONEY BUILDINGS OF 1,000 USES
COMPACTORS
FORKLIFTS / LIFTS / OTHER
2007 IR SD116DX, EROPS, AC/Heat, 84” Smooth Drum, Good Tires..............................$48,500 2007 IR SD116DX, EROPS, AC/Heat, 84” Smooth Drum, Only 393 Hrs ..........................$48,500 1996 CAT CS-563C, 84” Vib Smooth Drum, Good Tires, ROPS ......................................$34,900
2008 GEHL DL12H40, 12,000# 40’ Lift, Hyd. Leveling ....................................................$33,500 2003 I/R RT706H, 3394 Hrs, 6000Lb ..............................................................................$15,900 1995 JCB 505-22S, 5500Lb, 4X4 ....................................................................................$18,500 1999 GENIE S40, 4WD, 40’ Boom....................................................................................$13,900
WHEEL LOADER 2007 CAT 966H, EROPS, QC GP Bkt w/ Teeth, QC Forks, RC, 26.5x25 ..........................$109,500 2004 CAT 966G II, 95% Michelin Radials, GP Bkt or Forks, RC ......................................$79,500
GRADERS 2004 CAT 14H, West Coast Location, Front Push Block, 16’ MB, 20.5x25 ....................$135,000 2002 CAT 14H, West Coast Location, Front Push Block, 14’ MB, 20.5x25 ....................$127,500
DOZERS
OFF HIGHWAY TRUCKS
2006 CAT D9T, EROPS, SU/Tilt Blade, Excellent U/C, Rear C/W, Low Hrs......................$235,000 2000 CAT D8R, EROPS, Winch, VG U/C, 8U/Tilt ............................................................$117,500 2006 KOMATSU D65EX-15, EROPS, AC, Ripper, SU/Tilt, Exc. U/C, Very Good Cond ......$63,500 2005 DEERE 750C LGP II, EROPS, AC, VG U/C, 6 Way, 7753 Hrs ..................................$49,900
2007 CAT 730, A/C, Retarder, Excellent 750/65R25 Tires, Super Clean ........................$117,500 2006 CAT 730, C11 Eng, 319 HP, Retarder, VG Tires, Excellent ....................................$115,000 2000 CAT D250E, AC, Retarder, Very Good Tires ............................................................$49,500 2006 DEERE 300D, Retarder, 6x6, Good Tires, VG Running ADT ....................................$82,500 2005 DEERE 300D, Tailgate, 6x6, Good Tires, Good Runner............................................$79,500 2002 DEERE 250D, AC, Retarder, Tailgate, Super Clean, 23.5Rx25..................................$79,500 2007 VOLVO A30D, AC, Retarder, Tailgate, 23.5Rx25 Tires............................................$112,500 2003 KOMATSU HM400-1, AC, Retarder, VG 29.5R25 Tires, Excellent............................$54,500
EXCAVATORS 2003 CAT 330CL, 10’8 Stick, 34” Shoes, VG Condition ..................................................$54,500 2004 CAT 325CL, 10’8” Stick, 32” Shoes, Good U/C, AC Cab..........................................$49,500 2008 CAT 312CL, 9’6” Stick, Aux Hyd, 24” TGP, GP Bkt, AC............................................$59,500 2005 DEERE 330C LC, 54” GP Bkt w/ QA, Tight Turntable, VG U/C ................................$47,500 2007 DEERE 200C LC, 9’8” Stick, Aux Hyd, 40” GP, 32” TGP..........................................$62,500
Hybrid Buildings
Foundation Solutions
GENSETS / SKID LOADERS 2013 HIPOWER 310 KVA, JD Diesel, Insulated Cabin ......................................................$59,500 2011 HI-POWER 50KVA, 120/480V 3 Phase, Sound Supression ....................................$12,900
South Carolina Has Spent About $40M Since 2010 to Settle Road Claims COLUMBIA, S.C. (AP) A newspaper reports that South Carolina has paid about $40 million since 2010 to settle road claims and lawsuits against the Transportation Department, with much of that money going to settle cases involving damages caused by potholes. The State newspaper in Columbia reported the number of claims has averaged 2,600 over the past two years, up from 1,600 a year on average during the four preceding years. More than half the claims against DOT since 2010 have been for damage caused by potholes. In the 2005-2006 budget year, the state paid $4.3 million to settle claims against the Transportation Department. Costs reached $8.2 million in 2014. Pothole-related claims also are on the rise, accounting for roughly 70 percent of claims against DOT, growing to 1,761 in 2015 from 960 in 2010. Meanwhile, lawmakers are debating how best to fix South Carolina’s crumbling roads and bridges with Gov. Nikki Haley backing a Senate plan to spend $400 million on roads. But that’s not nearly enough money to fix the roads since DOT estimates it would cost an addition $1.2 billion a year for nearly three decades to bring the state’s roads and bridges to excellent condition, said Ted Pitts, president of the S.C. Chamber of Commerce. The Chamber wants the state to spend at least $600 million more a year on roads and bridges. That additional amount — spent yearly over a decade — would eliminate
Fabric Structures
structurally deficient and load-restricted bridges while also improving interstate, primary and secondary road surfaces, according to DOT estimates. According to DOT’s estimates, with a one-year injection of $400 million, “you don’t address one single secondary road bridge,’’ Pitts said. “You don’t change that at all.’’ Transportation Secretary Christy Hall has said the $400 million would be a welcome start. “Any investment in the road network ... would reduce those numbers,’’ said Hall, referring to damages that DOT pays. Besides potholes, drivers and pedestrians also have sought money for damages caused by other issues as well, including objects thrown by mowers, painting and resurfacing, and drainage and shoulder drop offs. State law allows drivers or pedestrians who have accidents or are injured on the state’s roads and bridges to file claims at the DOT maintenance office in their county. The Transportation Department has spent $2.3 million since 2010 settling some of those claims. Larger claims are sent to the S.C. Insurance Reserve Fund, which has spent more than $37 million since 2010 settling cases against DOT. That’s a poor use of state money, Pitts said. “Ask any taxpayer ... they’re going to tell you that’s a waste of taxpayer dollars,’’ he said. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
ZERO PERCENT FINANCINGG AAVAILABLE AVVAILABLE
RESTRICTIONS R ESTTR ICT I ONS MAY MAY APPLY A PPLY
Page 26 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 27
Rockblaster Hammers Brentwood, NY
(800) 999-6044 or (631) 273-1893 Fax: (631) 273-2418
ironhorseequip@msn.com
Equipment • Hammers • Parts Attachments • 24/7 On Job Service Specializing in all your hydraulic hammer needs worldwide
www.ironhorseequip.com
2007 SULLAIR 750H, 4383 Hrs, CAT Diesel C9, 150 psi, Serviced, Job Ready, Stk# H1008 ..............................P.O.R.
1992 INGERSOLL-RAND ECM490 DRILL, Cummins Diesel, 5352 Hrs, Ready to Work, Stk# H1009 ......................P.O.R.
Air Compressors 2000 ATLAS COPCO XAS1100, Stk# H1010..................................................P.O.R. 2008 INGERSOLL RAND 935 CFM, Stk# H1012 ..........................................P.O.R. 1994 INGERSOLL RAND XP750BWCU, Stk# H1023 ....................................P.O.R. 1993 SULLIAR 900Q, 900x150psi, Stk# H1025 ............................................P.O.R. 2007 SULLAIR 750H, Stk# H1008, Stk# 1008 ..............................................P.O.R. Excavators 1997 CAT 320B (2 Available), Stk# S2344-5-6 ............................................P.O.R. 2003 CAT 320CL, Stk# S2333 ......................................................................P.O.R. 2008 CAT 321D, Stk# H1033 ........................................................................P.O.R. 2007 CAT 345CL, Stk# H1002 ......................................................................P.O.R. 1996 KOBELCO SK150 LC III, Stk# H1049....................................................P.O.R. 1988 KOEHRING 6633LC-7, Hammer Available, Stk# H1028........................P.O.R. 2007 KOMATSU PC138-US LC-8, Stk# S2273-2 ..........................................P.O.R. 1996 KOMATSU PC220LC-6LC, Stk# H1034 ................................................P.O.R. Excavators Mini 2013 CAT 302.7 CR, Stk# H1055 ..................................................................P.O.R. Generator Sets 1990 LIBBY MEP007B, Stk# H1044 ..............................................................P.O.R.
2003 INGERSOLL-RAND 1070 CFM, 7000 Hrs, 350 psi, CAT E15, Ready to Work, Stk# H1001 ..................................P.O.R.
Forklifts - Telescopic 1993 INGERSOLL RAND VR90B, Stk# H1016 ..............................................P.O.R. Wheel Loaders 1970 CAT 980B, Stk# H1054 ......................................................................$22,800 1988 CAT 936E (2 Available), Stk# H1056-57..............................................P.O.R. Pile Drivers 2005 APE 20, Stk# H1035 ............................................................................P.O.R. McKIERNA-TERRY 9B3, Stk# H1050-2 ........................................................P.O.R. DELMA FFC VERTICAL TRAVEL FIXED LEADS, Stk# 1050-3........................P.O.R. Drills - Vertical 1985 INGERSOLL-RAND ECM350, Stk# H1022 ............................................P.O.R. 1992 INGERSOLL-RAND ECM370, Stk# H1007 ............................................P.O.R. 1992 INGERSOLL-RAND ECM490, Stk# H1009 ............................................P.O.R. 1998 INGERSOLL-RAND ECM490, Stk# H1021 ............................................P.O.R. 1998 INGERSOLL-RAND ECM490, Stk# H1020 ............................................P.O.R. 1999 INGERSOLL-RAND ECM670, Stk# H1030 ............................................P.O.R. Lowboy Trailers 1981 EAGER BEAVER DETACHABLE TRAILER, Stk# S2116 ........................$7,600
1985 INGERSOLL-RAND ECM350 DRILL, Drifter VL 140, Job Ready, Stk# H1022 ........................................................P.O.R.
Compactors - Smooth Drum 1988 DYNAPAC CA25D, CAT DIESEL, Stk# H1005........................................P.O.R. Crawler Dozers 1986 CAT D3B Z, Stk# S2344-4 ....................................................................P.O.R. Skid Steer Loaders 2002 CAT 262, Stk# S2328 ..........................................................................P.O.R. 2007 KOMATSU SK1020-5N, Stk# H1038 ....................................................P.O.R. Loader Backhoes 2004 CAT 430D, Stk# S2307 ........................................................................P.O.R. 2003 CAT 446B, Stk# S2345 ........................................................................P.O.R. 1998 CAT 446B (2 Available), Stk# S2327 ..................................................P.O.R. 2001 CAT 446B, Stk# 3 S2344-2 ..................................................................P.O.R. 2004 CAT 446D, Stk# S2306 ........................................................................P.O.R. Wheel Excavators 1995 CAT 214BFT, Hammer Available, Stk# H1018 ......................................P.O.R. 2007 CAT M315D, Stk# S2289 ......................................................................P.O.R. 2007 CAT M315D, Stk# S2290 ......................................................................P.O.R. 1997 CAT M318, Stk# S2301 ........................................................................P.O.R.
BRANDYWINE TRUCKS AND EQUIPMENT Only (1) Available! NEW/UNUSED
WE BUY EQUIPMENT!
(301) 372-0083 Shipping & Containerization Available
WE BUY TRUCKS!
WWW.BRANDYWINE-EQP.COM Low Hours New Witzco Lowboys, Customization Available, 3000 Hrs, 35-50 Ton in Stock ......................................................$Call
(2) Available
(6) Available
1988 Champion 710A, EROPS, Scarifier, 12’ Moldboard, Cummins Engine, A/C & Heat ....................................$21,900 Ea.
2012 Volvo EC250D LR, 4624 Hrs, 60’ Reach, 60” Bkt, A/C & Heat, Tier 4, Stock# 719H ..........................$165,000
1998 Cat 963B, EROPS, 98” Bucket, Good U/C, Strong Runner! Stock# 579l ..................................................$27,500
2012 Cat 320EL, 3000 Hrs, Mechanical Thumb, New Chains & Sprockets, Rear Camera, Medium Stick, Stock# 320El .. ................................................$129,900
2013 Deere 450J LGP, 1027 Hrs, OROPS, Factory Warranty Avail., Like New!..........................................$83,500
2007 John Deere 644J, OROPS, 11,500 Hrs, Hyd Q/C, Located in Tampa, FL, Stock# 578l ..............................$58,500
2012 Cat 312EL, Mechanical Thumb, Tier 4, Stock# 749H ........................$124,500
2004 Cat 963C, EROPS w/AC, 8900 Hrs, Nice Machine! Stk #212l ....$72,500
2006 Cat 345C LME, 14,058 Hrs, 72” Bkt, Counterweight Removal Device, 152I..........................................$105,000
2014 Low Hour Bomag BW213D-4, EROPS, 84” Drum, High/Low Frequency, 23.1x26 Rubber................$109,500 Ea.
(2) 2011 Cat 336DL, Both under 4,500 Hrs, Aux Hyd, Hyd Q/C, SBG Pads, Straight Travel, 12’10” & 10’8” Stick, Work Ready! ....................$195,000 Ea.
Page 28 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Event Features Door Prizes Including $900 Gift Certificate SKEET from page 24
(L-R): Ted Doran of James River Equipment learns about Hoopaugh Grading’s latest project from Larry and Melinda Hoopaugh.
A tasty BBQ lunch included banana pudding and refreshing tea.
Jesse Carpenter of Carolinas Grading and Utility, Ashe County, N.C., tests his skills on the John Deere simulator. This machine gives the operator an opportunity to learn how to use excavators, motorgraders and dozers.
Thomas Bruton of Bruton Grading, Mt. Gilead, N.C., obliterated all three clays at this station.
(L-R) are Leo Wambold, James River Equipment; Stephen Pedulla of Pedulla Excavating-Paving Inc., Mooresville, N.C.; and Terry Thomas, James River Equipment.
Representing Granite Contracting of Charlotte, N.C., are (L-R) Shannon Lowman, Brad Whaley, Chris Harrell and Steve Cosper.
Jeff Greene (2nd from R) of KRG Utility, Lenoir, N.C., won the grand prize — a $900 gift certificate to Aisle Gun Shop, Mooresville, N.C. On hand to offer congratulations are (L-R) Marcus Archer, Ronnie Rathbone and Ronnie Rowe.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 29
Have Pumps, Will Travel Finish Faster Faster with with Finish Holland Pump! Pump! Holland
Holland Pump manufactures, sells, rents, repairs Holland Pump manufactures, sells, of rents, repairs and services pumps for a wide range applications and services pumps for a wide range of GPM. applications with capacities from 500-150,000 with capacities from 500-150,000 GPM.
Easy 3rd party financing with great rates for 12-48 months
Ft. Myers, Jacksonville, Pensacola, Orlando, Tampa, Walterboro, West Palm Beach
Customer Service 1-800-451-0769 www.hollandpump.com
TR AM AC
KEEP YOUR BELTS FULL. Ĺ˜ 0RXQW D 7UDPDF 5RFN %UHDNHU DW \RXU SULPDU\ Ĺ˜ $YRLG JDSV LQ SURGXFWLRQ Ĺ˜ 5HDFK LQ TXLFNO\ WR EUHDN DQG FOHDU EULGJHG DQG EORFNHG PDWHULDO Ĺ˜ (QVXUH VDIHW\ ,QFUHDVH SURGXFWLRQ DQG UHOLDELOLW\ Ĺ˜ 7UDPDF LV D \HDU ROG IDPLO\ RZQHG FRPSDQ\ :H VSHFLDOL]H LQ 5RFN %UHDNHU (QJLQHHULQJ 0DQXIDFWXULQJ 6DOHV DQG 6XSSRUW
TRAMAC
800-526-3837
www.tramac.com
SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM
4 Tool Boxes Available All Include Slugs and O'Rings.
For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com
www.flangelock.com
Page 30 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Fecon Hires Kevin Chambers as Atlas Copco Names MECO as Dedicated Mid-South Regional Manager Fecon Inc. announced Kevin Chambers as regional manager, Mid-South region, covering Texas, Louisiana and Oklahoma. Through his 10-plus years of territory management within the industry, Chambers brings to Fecon extensive hands-on experience in development and implementation of sales and marketing strategies, dealer recruitment and development, sales and service training and direct sales. “His skills and qualifications are a strong fit for success in the Mid-South region,” said Dennis Goldbach, vice president of sales, Fecon Inc. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) Kevin Chambers
Service Provider
Atlas Copco Construction announced MECO Miami Inc. as a dedicated service provider for customers near Pompano Beach, Fla. “MECO Miami has a great history of supporting its customers,” said Alan Kurus, Atlas Copco Construction vice president of sales. “Our customers can rest assured that their equipment needs will be met while working with MECO, and I’m confident that MECO will continue representing the Atlas Copco brand well.” MECO is a 43-year-old family-owned company that sells, rents and services a variety of new and used equipment and parts for the agriculture, cranes, heavy lifting, mining and road construction industries in the United States and worldwide. The dealer offers a wide range of Atlas Copco equipment, including air compressors, asphalt rollers, light towers, handheld tools and soil rollers. “We chose to represent Atlas Copco and its equipment because there is an increasing demand for high-quality products in our area,” said Michael Vazquez, MECO Miami owner. “Atlas Copco helps us fill this growing demand.” For more information, call 800/732-6762 or visit www.atlascopco.us (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 31
Page 32 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
By Kim Chandler ASSOCIATED PRESS
MONTGOMERY, Ala. (AP) A proposed gasoline tax increase to pay for road and bridge construction cleared its first hurdle in the Alabama Legislature on March 17. The House Transportation, Utilities and Infrastructure Committee approved the bill, sending it to the full House of Representatives for a vote that could come in early April. The proposal would raise the gasoline tax by 6 cents per gallon, a figure that the bill’s sponsor, Rep. Mac McCutcheon, said would bring Alabama’s fuel tax in line with neighboring states. The tax would then be adjusted every four years to equal the average tax in Alabama’s four border states. McCutcheon, R-Capshaw, said there is a critical need for infrastructure improvements in the state. “We cannot continue in our state to allow the infrastructure to deplete because we are afraid to address this issue, as tough as it is,’’ McCutcheon said. McCutcheon said the state hasn’t raised gas taxes in more than 25 years, while the cost of road and bridge construction has increased. The adjustments every four years would assure there is some “growth’’ in the tax, although lawmakers could reject the increase by passing a joint resolution, he said. The tax would end in 2027, unless lawmakers vote to renew it.
The committee-passed bill also would place an annual fee on vehicles that run solely on alternative fuels, $100 for each private passenger and $150 for commercial vehicles. The committee approved an amendment to the original bill that exempted hybrids from the annual fee. The proposed gas tax increase comes as many lawmakers say there’s no appetite among legislators for tax increases. McCutcheon said it was an investment in Alabama’s future. Rep. Will Ainsworth, R-Guntersville, cast the only no vote against the bill in committee “I’m just not in favor of the hardworking people in Alabama having to pay any more in taxes,’’ Ainsworth said after the committee. “I think there is a legitimate argument that there needs to be something done to obviously fix the infrastructure in the state. My position is there are other things we could do in reforming government to come up with the funding,’’ Ainsworth said. A slightly different gas tax bill was introduced in last year’s special session but never got a floor vote. “Tying it to the southeast average has really helped us in terms of members looking at it and understanding that we are not asking for something outlandish,’’ said Sonny Brasfield, executive director, Association of County Commissions of Alabama. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
After Delays, Nepal Begins Reconstruction of Quake-Damaged Heritage Sites By Binaj Gurubacharya ASSOCIATED PRESS
KATHMANDU, Nepal (AP) Nepal’s prime minister announced on April 25 the start of reconstruction of key heritage sites in and around the capital that were damaged by an earthquake that killed nearly 9,000 people and devastated the country one year ago. Prime Minister Khadga Prasad Oli offered prayers at the 17th century white-walled temple Anantapur, which was damaged in the magnitude 7.8 quake on April 25, 2015, along with more than 600 other historic structures. More than half a million homes also were destroyed, but hardly any have been rebuilt. Nepal has been criticized for delays in reconstruction — largely due to bureaucratic bungling — of its historic structures and residents’ homes despite foreign donors pledging $4.1 billion
toward that end. Aid groups have demanded that authorities speed up the process and change some of the laws that have become obstacles. Oli said that work would begin on rebuilding the temple and three other heritage sites in Kathmandu, including the old palaces and temples at Kathmandu’s Durbar Square and key sites in the nearby cities of Patan and Bhaktapur. Anantpur is one of the small Buddhist temples, stupas and monasteries surrounding the 5th-century hilltop shrine of Swayambhunath that lies in ruins. The site also is called the “monkey shrine’’ for the thousands of monkeys that congregate on the spot at the northwest edge of Kathmandu. It is listed among the UNESCO heritage sites. The prime minister said the work would progress swiftly, adding it was a huge task that would require time. He also said construction of private hous-
es have been initiated in 10 districts to mark the anniversary. According to the International Federation of Red Cross and Red Crescent Societies, an estimated 4 million people are still living in sub-standard temporary shelters in conditions that pose a threat to their health and well-being. Only 661 families have received the first installment of a 200,000-rupee ($1,868) government grant, getting 50,000 rupees ($467) so far. Out of the $4.1 billion pledged, Nepal has so far received just $1.28 billion. The delay in getting the money has been blamed on the government taking months to set up the National Reconstruction Authority, which was done only in December. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. GO WITH KOMAT With Komatsu CARE you can:
>>>>>
Alabama Committee Approves Gas Tax to Pay for Road Construction
TIER 4 INTERIM E
• Lower your cost of ownership MAINTENANCE B • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment
y Komatsu T CARE complim
To learn more e about
It’s just part of our Program Komatsu designed to deliver complete CARE contact your 3 years, plus 2 c service and support solutions to Komatsu customers. Komatsu distributor or scan
thisCARE QR code Komatsu
To learn more about with your contact your Komatsu distributor or scan smart phone. this QR code with your smart phone.
Q
Lower your c
Q
Increase equ
Q
Protect the va
It’s just part of ou solutions to Kom
MIDWEST KOMATSU DISTRIBUTORS
H&E Equipment Services www.he-equipment.com AR Little Rock 501-568-7867 800-632-0577 Springdale 479-927-1672 888-200-6343 LA Alexandria 318-443-7173 800-249-8485 Baton Rouge 225-356-6113 800-872-1305 Bossier City 318-746-5272 800-643-2844 Broussard 337-837-9600 877-463-9914 Kenner 504-467-5906 800-203-1869 Sulphur 337-528-2661 800-258-1614
Linder Industrial Machinery www.linderco.com FL Ft. Myers 239-337-1313 Jacksonville 904-786-6710 Ocala 352-629-7585 Orlando 407-849-6560 Pembroke Pines 954-433-2800 Plant City 813-754-2727 West Palm Beach 561-863-0570 NC Arden 828-681-5172 Charlotte 704-376-7554 Greenville 252-695-6200 Greensboro 336-665-0110 Raleigh 919-851-2030 Wilmington 910-254-2031
W E S T K O M AT S U D I S T R I B U T SC UT Soldotna Bacon-Universal Hurric 907-262-5977 Company,Greer Inc Company, Inc.. 435-9 800-254-5977 864-877-8962 Salt L Wasilla HI 801-9 North Charleston 907-376-3838 Hilo 800-973-2607 South 808-935-8595 843-552-0095 801-9 800-352-3508 Kirb Kirby-Smith y-Smith Mac Machinery hinery Inc Inc.. WY West Columbia Honolulu Gillett 808-839-7202 803-794-6150 307-6 800-352-3508 Kailua-Kona 808-326-1212 800-352-3508
OK
Oklahoma City 405-495-7820 800-375-3339 Tulsa 918-438-1700 800-375-3733
Rock S 307-6
Lyle Machinery Co.Mode
Kauai (Lihue) 808-245-8472 800-352-3508
www.lylemachinery.com MS TX Columbus Abilene 325-692-6334 877-577-5729 662-243-2152 Claremont Clar emontHattiesburg Equipment Co Co.. Amarillo 806-373-2826 .clairemontequipment.com 800-283-1247 601-296-7556 CA Dallas Escondido Jackson 214-371-7777 760-739-9100 800-753-1247 601-939-4000 Imperial Ft Worth Magnolia 760-355-7700 817-378-0600 877-851-9977 San Diego 601-783-2111 858-278-8351 Lubbock Saucier 806-745-2112 Craig Taylor Equipment Cr 866-289-6087 Company 228-832-7575 Wailuku Maui 808-244-9158 800-352-3508
ylorequipment.com AK
Komatsu Equipment Co. Co. tsueq.com
Power Equipment
Anchorage 907-276-5050 800-279-5051
NV
Elko www.powerequipco.com 775-753-7561 North Las Vegas MS 702-399-1004 Saltillo Reno 775-356-1334 662-869-0283 TN Chattanooga 423-894-1870 Kingsport 423-349-6111 Knoxville 865-577-5563 LaVergne 615-213-0900 Memphis 901-346-9800
Fairbanks 907-452-1192 800-452-1192
ID
Boise 208-3 800-2 Pocate 208-2 800-8 MT
Billing 406-2 800-7 Kalisp 406-7 800-4 Misso 406-5 800-3 OR
Eugen 541-6 800-8 Portla 971-2 800-9
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 33
Rish Equipment Company www.rish.com MD Frostburg 301-689-2211 VA Bealton 540-439-0668 Chesapeake 757-485-2100 Chester 804-748-6411 Coeburn 276-395-6901 Salem 540-380-2090 Staunton 540-887-8291 WV Beckley 304-255-4111 Bluefield 304-327-5124 Bridgeport 304-842-3511 Logan 304-752-9313 St. Albans 304-755-3311
Tractor & Equipment Company www.tractor-equipment.com AL Alabaster 205-621-2489 Anniston 256-831-2440 Birmingham 205-591-2131 Decatur 256-355-0305 800-321-6865 Dothan 334-678-1832 Mobile 251-457-8991 800-233-7213 Montgomery 334-288-6580 800-832-9563 Tuscaloosa 205-752-0621 Tuscumbia 251-275-4159 FL Panama City 850-763-4654 Pensacola 850-505-0550 GA Albany 229-435-0982 800-733-0962 Augusta 706-798-7777 800-659-3090 Calhoun 706-879-6200 800-827-3072 Columbus 706-562-1801 877-307-6439 Forest Park 404-366-0693 Hoschton 706-654-9850 888-334-9850 Kennesaw 678-354-5533 Macon 478-745-6891 Savannah 912-330-7500 800-827-1405
www.komatsuamerica.com/komatsu-care
MY CUSTOMERS LOVE KOMATSU!
SUPPORTED WITH PRIDE
Page 34 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
(L-R): Gregg Sigman and Keith Poff, both of H&E, and Ben Criss of Doosan talk about the Doosan excavators, wheel loaders and forestry equipment offered by H&E Equipment Services.
(L-R): David Morice, Jennifer Garrett and Dale McLemore, all of Yanmar, stand by to answer questions about the Yanmar ViO80-6A. It is an 8-ton (7.2 t) unit, featuring zerotail swing and a fuel efficient three-pump engine system, enabling it to use a lower hp engine for improved fuel efficiency.
Lyndon Overholt (L) of Overhalt Grading in Abbeyville, S.C., talks with Matt Caldwell of H&E Equipment Services about the Yanmar T175 track loader he just purchased.
H&E Hosts Grand Opening at Its New Greenville Branch
N Guests enjoy lunch at the new H&E Equipment Services facility.
(L-R): Lance Ledford and Carl Turner, both of Southern Logging in Dacusville, S.C., listen to Jim Hockaday of JCB go over the features of this JCB 3CX backhoe.
(L-R): Deana Totherow, Tami Lund and Jan Burgess, all of H&E Equipment Services, present a door prize to Justin Wilson, Brandon Couch and James Whitesides, all of TBA Construction in Union, S.C.
early 490 customers, manufacturer representatives, employees, neighboring businesses and H&E Equipment Services executives attended H&E’s Greenville, S.C., grand opening celebration. A total of 22 equipment manufacturers participated and displayed/demoed their latest in equipment and innovation, including Doosan, Yanmar, National Crane, JLG, Genie, Skyjack, Multiquip, Wacker and Atlas Copco, among others. Jason Burgess, H&E Greenville branch manager said, “As the Greenville economy returns to pre-recession business levels, and customers demand more from their equipment source, we are excited to open our new and improved facility in Greer, S.C. The timing could not be better for us and our customers as we expand and meet their growing needs. Our new facility is much larger in every area, including rentals, sales, parts and service. It was our pleasure to showcase our expanded capabilities at our grand opening celebration.” The new 19,125 sq. ft. (1,776 sq m) facility sits on five acres, with office space, a parts warehouse, large yard area and an eightbay repair shop that includes two, 5-ton (4.5 t) overhead cranes. The facility is capable of repairing a variety of machines from compact construction equipment to large earthmoving units. H&E offers construction and industrial equipment rentals, along with new and used equipment sales. Its fleet includes 449 units in Greenville, 931 in South Carolina and more than 27,000 nationwide. The company is a full-service dealer for manufacturers including Doosan, National Crane, Yanmar earthmoving, Okada attachments, Genie, JLG, Skyjack aerial lifts, Skytrak forklifts, Atlas Copco, Gehl, Magnum, Miller, Multiquip, Wacker and more. H&E Equipment Services offers the support its service team and can perform minor and major repair for most makes and models. In addition, the company’s branches offer parts for most makes and models with 82,000 line items available. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG
(L-R): Dan Gaither, Dan Williams, Ken Farris and Bryan Kiser, all of H&E Equipment Services; Justin Davis, Davis Erecting in Greenville, S.C.; and Brad Barber, president and COO, H&E Equipment Services, stand in front of this 1400A National crane.
(L-R): Frankie Autrey, H&E Equipment Services and Nathan Torrez, Jason Putnam, Csaba Szaba, Michael Bingham, Lucas Baiz and Antonio Zabala, all of Bonitz Construction in Greenville, S.C., stand in front of the Manitex straight mast rough-terrain forklift.
Greg Stuchel (L), McCrory Construction in Columbia, and Richard Barnhart, H&E Equipment Services, attend the event.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 35
Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.
DELIVERING SUCCESS TOGETHER
Contact our distributors and find out how we can help improve your bottom line.
DOZIER CRANE
ML CRANES & EQUIPMENT
R T- T- HC/CC- AT- B T www.doziercrane.com
R T- T- HC/CC- AT- BT www.mlcranes.com
155 Pine Barren Road Pooler, GA 31322 912-748-2684 Fax: 912-748-5361
VIRGINIA
MARYLAND
160 Kentmere Court Winchester, VA 22603 540-722-3700
4601 Washington Blvd. Baltimore, MD 21227 410-242-6500
1345 Mountain Rd. Glen Allen, VA 23060 804-266-0000
DELAWARE
4112 Holland Blvd. Chesapeake, VA 23323 757-485-3314
17941 Sussex Highway Bridgeville, DE 19933 302-337-3400
8450 Quarry Rd. Manassas, VA 20110 703-393-7344
NORTH CAROLINA
2025 Cook Drive Salem, VA 24153 540-989-3750
For Your Local Terex Dealer Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes
3908 N. Graham St. Charlotte, NC 28206 877-649-7739
808 Norton Rd. Wise, VA 24293 276-328-8027
Authorized Terex Cranes Distributors © Terex Cranes 2016 · Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.
Page 36 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MAY HEAVY EQUIPMENT RENTAL & SALES Raleigh, NC 866-629-3784 www.mayequip.com
EARTHMOVER CONSTRUCTION EQUIPMENT LLC A Division of Advantage Construction Equipment & Parts 8451 SW Old Kansas Ave. Stuart, FL 34997 407-401-8956 www.constructionequip.com
TUFF EQUIPMENT COMPANY 181 Industrial Blvd. LaVergne, TN 37086 615-851-4345 1-877-634-TUFF www.tuffequipco.com
CENTRAL ATLANTA TRACTOR SALES, INC. 7330 Delta Circle Austell, GA 30168 770-819-6600 www.centralatlantatractor.com
MECO MIAMI, INC. 5825 NW 74th Avenue Miami, FL 33166 305-592-4332 www.mecomiami.com
RICHARDSON SERVICE 1991 INC. 2667 U. S. 378, Conway, SC 29527 800-968-0754 www.rs91inc.com
INTERNATIONAL IRON 2325 Clark St Apopka, FL 32703 407-809-5856 F407-347-4664 www.intiron.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 37
PRODUCTIVITY POWERHOUSE. Powered by our 6.8L EPA Final Tier 4 (F T4)/EU Stage IV diesel engine, the 850K Crawler Dozer picks up the pace when it comes to productivit y. Designed to work just as smart as you work hard, it comes packed with detail-oriented features that help you get in, out, and on to the next job. Our purpose-built mainframes optimize blade ratio and center of gravit y for superior balance. So whether you opt for a power/angle/tilt (PAT) or an outside-mount straight or VHPL 8 EODGH \RXŤOO ZDWFK SURĆ&#x;WDELOLW \ VKDSH XS ULJKW EHIRUH \RXU H\HV
FLINT Construction & Forestry Division Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Braselton, GA 770/965-1889 Macon, GA 478/788-1586 Adairsville, GA 770/773-9857 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370
Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Aynor, SC 843/358-5688 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420
JAMES RIVER EQUIPMENT
, ,
www.jamesriverequipment.com , ,
Ashland, VA 804/798-6001 Manassas, VA 703/631-8500 Winchester, VA 540/667-9777 Tazewell, VA 276/596-9440 Fishersville, VA 540/337-3057 Salem, VA 540/380-2011 Asheville, NC 828/667-0176 Charlotte, NC 704/597-0211
Greensboro, NC 336/668-2762 Mt. Gilead, NC 910/439-5653 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Wilmington, NC 910/675-9211 Fayetteville, NC 910/424-1200
u M COASTAL v EQUIPMENT a www.coastalequipment.net
o
e
Virginia Beach, VA 757/424-1900 Yorktown, VA 757/898-1900
, NORTRAX 4 a
5
Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Miami, FL 305/592-5740 Orlando, FL 407/299-1212 Pompano Beach, FL 954/977-9541 Riverview, FL 813/621-4902 West Palm Beach, FL 561/848-6618
www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 LaVergne, TN (Nashville) 615/501-8600
Page 38 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Tilt cab
Superior boom design
Removable outrigger boxes
RT9150E rough-terrain crane
Need Financing?
At Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite. Featured is the RTE – its USt capacity and ft. boom combination provide the best capacity and longest boom in its class.
For more information, visit www.manitowoccranes.com
HE-equipment.com
www.cowin.com Birmingham, AL 205-841-6666 Mobile, AL 36608 251-633-4020 Montgomery, AL 334-262-6642 Pensacola, FL 850-479-3004 Huntsville, AL 256-536-9390 Decatur, AL 256-350-0006 Oxford, AL 256-832-5053
Springdale, AR 479-927-1672 Little Rock, AR 501-568-7867 Shreveport, LA 318-746-5272 Alexandria, LA 318-443-7173 Lafayette, LA 337-837-9600 Lake Charles, LA 337-528-2661
Baton Rouge, LA 225-356-6113 Kenner, LA 504-467-5906 Memphis, TN 901-375-4902 Nashville, TN 615-248-0266 Chattanooga, TN 423-499-7700 Arden, NC 828-684-1692
www.ringpowercrane.com Charlotte, NC 704-504-2870 Raleigh, NC 919-781-9454 Winston-Salem, NC 336-767-6900 Chesapeake, VA 757-295-4944 Ashland, VA 804-798-9740 Roanoke, VA 540-362-3600 Warrenton, VA 540-349-2878
St. Augustine, FL 904-737-7730 Pompano Beach, FL 954-971-9440 Tampa/Orlando, FL 407-855-6195 Miami (Int. Sales) 305-477-8717 Union City, GA 770-774-7300 Concord, NC 704-795-3636 Ladson, SC 843-818-1954
SECTION
Trucks & Trailers Pages 39-42
To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
Mack mDRIVE HD Now Standard on Granite Models In response to increasing customer demand, Mack Trucks announced its Mack mDRIVE HD 13-speed automated manual transmission (AMT) will be standard on Mack Granite models. Featuring a low ratio creeper gear, the mDRIVE HD 13-speed helps boost customer productivity due to improved performance and reduced weight, according to the manufacturer. Mack is the first truck manufacturer in North America to offer low reduction creeper gear ratios in a proprietary automated manual transmission. Since Mack announced the availability of the mDRIVE HD 13-speed in March, customer response has been overwhelmingly positive, encouraging Mack to make the 13-speed AMT standard on the Granite model starting with production of the 2017 MP8 engine. The mDRIVE HD 13-speed also is available on Mack Pinnacle and Titan by Mack models. “Making the mDRIVE HD 13-speed standard on the Granite is a natural evolution of our industry leadership,” said Dennis Slagle, president of Mack Trucks. “Since its introduction, the mDRIVE has become incredibly popular — starting first with highway and more recently with many heavyduty vocational applications. The introduction of the 13- and 14-speed gears expands the range and performance in vocational applications so much so that it is only natural for it to become our standard offering in the Granite model.” Available in direct or overdrive configurations, the new Mack mDRIVE HD 13-speed offers a low reduction creeper gear ratio designed for easier startability on steep grades or when the truck is carrying a heavy load. This improved startability also allows
customers to select a faster rear axle ratio. The faster ratio decreases engine rpm at highway speeds, saving fuel as the truck travels between job sites. The mDRIVE HD 13-speed, like all Mack mDRIVE AMTs, is monitored by Mack GuardDog Connect and serviceable at more than
400 Mack dealers. GuardDog Connect is Mack’s proactive diagnostic and repair planning system. It monitors fault codes that could potentially shut down a truck or lead to an unplanned visit to the dealer. GuardDog Connect enables quick diagnosis of issues, proactive scheduling for repairs and confirmation that needed parts are in stock and ready to install, all while the truck is still on the job. The Mack mDRIVE HD 13-speed shares its architecture with the standard mDRIVE HD, including reinforced internal components and the same gear ratios for the 12 forward speeds. Mack also announced in March the availability of the mDRIVE HD 14-speed. The addition of the two transmissions with creeper gears enables Mack to meet the needs of a
wider range of customer applications with the power and performance that only a fully integrated powertrain can offer. Mack mDRIVE AMTs are available exclusively with Mack MP engines. Due to the new low reduction creeper gears, the mDRIVE HD 13- and 14-speed The Mack mDRIVE HD 13-speed automated manual transmission (AMT) is standard on Mack Granite models.
transmissions not only improve performance in off-road, heavy haul and construction applications, but also for on-highway applications, according to the manufacturer. Mack now offers both new mDRIVE HD variants in Mack Pinnacle models. The addition of the low reduction creeper and multispeed reverse gears is made possible by a short extension added to the front of the transmission case. Despite the additional capabilities, the new mDRIVE HD models are less than 5 in. (12.7 cm) longer and only 90 lbs. (40.8 kg) heavier than the standard mDRIVE HD, maintaining a weight advantage of nearly 150 lbs. (68 kg) compared with automatic transmissions. The Mack mDRIVE HD 14-speed, available only in an overdrive configuration, adds a second ultra-low-speed reduction gear designed for curb pouring applications or
low-speed, heavy-haul maneuvering. Both transmissions offer up to four reverse gear ratios. In addition to the two new models, all Mack mDRIVE transmissions, including the standard mDRIVE and mDRIVE HD, received numerous updates for improved performance and durability. The transmissions are controlled by a redesigned gearbox control unit, while a new clutch with a larger torsional damper helps reduce driveline vibration. Component wear monitors also were added to enable predictive maintenance. “Response to the mDRIVE and mDRIVE HD has been tremendous,” said Roy Horton, director of product strategy. “Currently, mDRIVE penetration for Pinnacle axle back and axle forward models is at approximately 80 percent and 60 percent, respectively, while mDRIVE HD penetration for Granite models is about 20 percent and growing. The penetration level of mDRIVE in all our models has continued to increase since its introduction.” Available in axle forward or axle back configurations, the Mack Granite model delivers the reliability, durability and strength expected of a Mack. The high-performing, fuel-efficient Mack MP7 and MP8 engines range from 325 hp and 1,200 lb.-ft. of torque to up to 505 hp and 1,760 lb.-ft. of torque. Every Granite model is built on Mack’s proven Cornerstone chassis and can be paired with a Mack Camelback suspension, a vocational industry standard, or the Mack mRIDE spring suspension, which delivers higher ground clearance and extreme articulation. The Mack mDRIVE HD 13- and 14speed AMTs are scheduled to go into full production in October. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
Page 40 • May 25, 2016 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
TIGER EQUIPMENT www.tigerequipment.com 4181 New Bern Hwy Jacksonville, NC 28546 910-346-1932
805 Old Roberts Rd Benson, NC 27504 919-989-0066
RING POWER CORP. 500 World Commerce Parkway St. Augustine, FL 32092 904-494-7631 www.ringpower.com Brooksville 352-797-9500
Orlando 407-856-4851
Daytona Beach 386-947-4939
Palm Bay 321-725-6420
Jacksonville 904-714-3517
Sarasota 941-359-6050
Lake City 386-755-3997
Tallahassee 850-514-1958
Lakeland 863-606-0512
Tampa 813-671-3200
Ocala 352-620-0660
800-347-6225
Nextran Truck Center
Fax: 904-354-3807
SPECIAL TRUCK SALE
2015 Low Boy Tractor, 505HP, 13 Speed, Rawhide Package, 14.6 FA, 46 Rears, Room for a Lift Axle
2016 Mack GU532, Cummins ISL Engine 345HP, Allison Auto Trans., 10 Yard Dump Body, 16500 Lb Front Axle, 23000 Lb Rear Axle
2006 Mitsubishi Fuso, 128,000 Miles, 14’ Flat Bed Isuzu NPR-HD with Tool Body, Gas
TBEI Achieves ISO 9001:2015 Certification Truck Bodies & Equipment International Inc. (TBEI) has announced that its Lake Crystal facility has achieved ISO 9001:2015 Certification. The recognition makes the TBEI Lake Crystal facility one of the only dump body manufacturers in the United States to achieve this level of certification. The certification comes just three years after the facility was awarded the ISO 9001:2008 certification. The TBEI Lake Crystal facility manufactures the Crysteel, J-Craft and Ox SuperDump products. “This is truly a significant accomplishment, magnified by the fact that the facility achieved ISO 9001:2008 certification only three years ago,” said Bob Fines, TBEI president and CEO. “To achieve this next level of certification is very impressive. Less than one percent of companies in the United States are ISO certified, and as one of the only dump body manufacturers in the country to obtain this level of certification, we are extremely proud of our Lake Crystal facility and pleased to continue providing our customers with the highest quality products.” The International Organization for Standardization, or ISO, is an independent, non-governmental organization headquartered in Geneva, Switzerland. ISO has members in 161 countries around the world. The ISO 9001:2015 Certification is a quality management certification that ensures that all manufacturing systems are documented, trained to, followed, audited and repeatable. For more information, call 800/533-0494 or visit www.crysteel.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 25, 2016 • Page 41
Ăůů Žƌ ǀŝƐŝƚ ŽŶĞ ŽĨ ŽƵƌ ƐĞǀĞŶ ůŽĐĂƟŽŶƐ ƚŚƌŽƵŐŚŽƵƚ ůĂďĂŵĂ Θ DŝƐƐŝƐƐŝƉƉŝ Žƌ ǀŝƐŝƚ ƵƐ ŽŶůŝŶĞ Ăƚ ǁǁǁ͘dZh <tKZy͘ĐŽŵ͘ Birmingham, AL (205)326-6170
Dothan, AL (334)712-4900
Huntsville, AL (256)308-0162
Montgomery, AL (334)263-3101
Thomasville, AL (334)636-4380
Mobile, AL (251)957-4000
Jackson, MS (601)939-5300
Page 42 • May 25, 2016 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
LB’s Trailer Sales 2904 Harmony Highway Harmony, NC 28634 (704) 546-2231
Bobcat of Charleston
Bobcat of Columbia
Bobcat of Spartanburg
Bobcat of Savannah
(843) 725-6330 (800) 220-6266
(803) 933-9996 (800) 220-6266
(864) 342-9003 (800) 220-6266
(912) 236-5538 www.bobcatops.com
Atlantic Coastal Equipment Sales & Rentals 922 Longwood Drive Richmond Hill, GA 31324 (912) 459-1155 www.acesalesandrentals.com
Kenworth Video Features Its Flagship Vocational Truck Kenworth has released an informative, 7-1/2-minute video on the Kenworth T880 vocational truck. Named the 2015 Truck of the Year by the American Truck Dealers (ATD), the Kenworth T880 exemplifies Kenworth’s long-time core values of quality, innovation and technology in producing The World’s Best trucks. Day in and day out, the durable T880 is a dependable, versatile truck capable of performing the toughest jobs productively and efficiently, according to the manufacturer. The video features T880 dump, mixer, wrecker, heavy hauler, logger and refuse trucks in action going up steep grades, in the rain, and on- and off-road. Watch the video on the T880 section of Kenworth’s website (www.kenworth.com/trucks/t880), and also under the Kenworth YouTube site (www.youtube.com/watch?v=WY 79QlnTUxQ). The T880 is standard with the PACCAR MX-13 engine rated up to 500 hp and 1,850 lb.-ft. of
The video features T880 dump, mixer, wrecker, heavy hauler, logger and refuse trucks in action going up steep grades, in the rain, and on- and off-road.
torque. The PACCAR MX-13 provides a lightweight, fuel-efficient engine for vocational applications, including dumps and heavy haul applications over 100,000 lbs. The T880 also is available with the new PACCAR MX-11 engine with up
to 430 hp and 1,550 lb.-ft. of torque. The 10.8-L engine is 400 lbs. lighter than 13-L engines and provides truck operators with enhanced payload capacity and fuel economy. The video includes information
on the Eaton UltraShift Plus transmission — available on the T880 — which offers Hill Start Aid, creep modes, auto neutral, and engine and clutch over speed protection. UltraShift Plus transmissions employ grade sensing,
weight computation and driver throttle commands for reliability and performance during launch and shift decisions. In addition, the video explores the Kenworth T880’s offering of lightweight, factory-installed lift axles and suspension options. The video also focuses on important driver comfort features. The quiet, 2.1-meter lightweight and robotically assembled aluminum cab provides a spacious 23 in. of room between the seats. The Kenworth proprietary air suspension seats automatically adjust to the driver’s weight. Drivers also benefit from the panoramic windshield, complex reflector headlamps, air-assisted hydraulic clutch, and an ergonomic dash panel that is easy to read and use. In addition to its day cab configuration, the T880 is available with 52- and 76-in. mid-roof sleepers, along with a new 40-in. sleeper. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 43
JCB Produces 200,000th Loadall Telescopic Handler JCB’s Loadall has been one of the world’s most popular telescopic handlers for many years, leading the market with innovative design and engineering excellence. The Loadall has provided materials handling and lifting solutions for construction, agricultural and industrial markets for almost four decades. On April 7 JCB celebrated the production of its 200,000th award-winning Loadall telehandler, a milestone in materials handling history. Launched in 1977 as the JCB 520, the first Loadall was a twowheel drive machine with a 21-ft (6.4 m) lift height and a maximum lift capacity of 2.48 tons. Previously, contractors had lifted materials with rough terrain fork lifts, backhoe loaders and wheel loaders. Over the past 40 years, the JCB Loadall range has expanded to incorporate machines with working heights of up to 65.6 ft (20 m) and maximum lift capacities exceeding 6.61 tons. With every update, JCB has moved the telescopic handler market forward, introducing fourwheel drive, placing the engine to the side of the chassis to allow a lower boom-mounting position and offering multi-mode steering with equal-sized wheels to improve maneuverability. “From very small beginnings, the JCB Loadall has become a very important machine for JCB and for the construction and agricultural industries,” said Lord Anthony Bamford, JCB Chairman. “Revolutionary’ is often a word that is overused, but in the case of the Loadall, it is a perfect description. The way loads are handled on building sites and farms has never been the same since we introduced the Loadall in 1977.” From that early two-wheel-drive 520 model, the range grew rapidly with the addition of the heavierlifting 525 in 1980 and the lighter second-generation 520-2 and 5204 in 1981. The 520-4 introduced four-wheel drive and larger rear wheels for improved traction on construction sites. These models also were notable for the introduction of JCB’s Q-fit implement carriage, which allowed operators to work with a range of buckets and attachments, including pallet forks. Though known worldwide as
Loadalls, it wasn’t until 1982 that JCB adopted this name. At that time, JCB introduced its own slickshifting synchro-shuttle transmissions. Servo control levers were added in 1986 for easier operation, particularly in repetitive handling and loading operations. JCB completely overhauled the
L Dieselmax. In 2006, output was increased further for the engine’s debut in the side-engine Loadall. Two versions of this potent engine powered a purpose-built streamliner to a new diesel land-speed record on Utah’s Bonneville Salt Flats. In response to customer demand
the first compact side-engine Loadall with hydraulic propulsion, this enhanced machine offered a great combination of size, maneuverability, driving ease and loading/handling performance. To meet new emissions standards and performance demands, JCB developed the 4.4-L
Loadall MD Ian Pratt (Far L) and Loadall Operations Director Paul Grys (Far R) join employees (L-R) Ian Vickery, Cliff Ferrie, Mick Smith, Dave Bailey, Nick Miller, Paul Stockley and Richard Jenkinson in celebrating the 200,000th Loadall milestone.
Loadall concept in 1989 with rearengine models incorporating multi-mode steering and equalsized wheels all round for improved travel comfort and maneuverability. In addition to front-end, two-wheel steering that made it easier to drive a Loadall down the road, drivers could enjoy turning in tight circles with allwheel steering or even shuffling sideways in crab-steer mode to get out of an awkward corner or take the bucket edge along the side of a roadway. However, by 1997, JCB discovered that moving the engine to a side-mounted position between the wheels could lead to further improvements. This allowed a greater reduction in the height of the boom pivot for even better visibility over the right-hand side and to the rear three-quarters while providing unmatched service access to the power unit and cooling pack. Power and fuel efficiency benefitted again in 2005 when JCB introduced its own engine, the 4.4-
for increased performance and lower ownership costs, top-end Loadall models featured a highcapacity, variable-flow hydraulics system with oil pumped only as needed up to 140 liters per minute. That same year, the Loadall reached a significant production milestone when it became the first telehandler brand to hit the 100,000 mark. A $9 million investment in manufacturing resources and a second assembly line at the Rocester, UK, headquarters factory brought improved production efficiency and flexibility and substantially increased capacity. Just one year later in 2007, JCB would win the Queen’s Award for its groundbreaking 536-70, 535-140 HiViz and 535-125 HiViz models. These models would be closely followed in 2008 by a completely new side-engine, high-boom design for the North American market. In 2009, JCB built on existing experience with hydrostatic drives in mid-engine compact handlers to develop the 527-58. As
EcoMAX engines further, using only cooled exhaust gas recirculation (EGR) and a variable geometry turbo to meet Tier IV Interim emissions standards. Installed in high-specification versions of mainstream Loadall handlers in 2012, the EcoMAX also featured a more powerful engine control unit that sharpened its responses and helped deliver more torque and better fuel consumption. JCB also introduced a 74 hp (55 kW) EcoMAX engine to meet demand for lower operating costs, CO2 emissions and improved efficiency. This served as a popular choice for customers thanks to the exceptionally strong low-speed torque characteristics normally only seen on higher-powered engines. Also in 2012, JCB launched the heavyweight 550-80, a 26.25-ft. (8 m) lift machine with a 5.5-ton capacity, designed primarily for arduous loading operations with high-capacity buckets in both waste handling and agricultural markets. This would be closely fol-
lowed in 2014 by the 560-80, taking that maximum lift capacity to 6.61 tons. JCB’s highest lifting machine, the five-stage boom 540200, also joined the line-up at that time, providing customers with a stable 65.62-ft .(20 m) lift height. Today, the Loadall engine features a compact exhaust silencer and selective catalytic reduction (SCR) system housed beneath the hood to meet Tier IV Final emissions standards without the added hardware and servicing costs associated with the diesel particulate filter (DPF) needed on several competitive machines. The 74 hp (55 kW) EcoMAX solution really comes into its own as it meets emissions legislation without any requirement for after-treatment, mitigating the need for DEF (AdBlue). Hydraulic performance came under the spotlight in 2014 with the introduction of smart hydraulics across the 550, 560 and Wastemaster range, which includes a unique lift cylinder circuit that permits the boom to lower faster under complete control at low engine revs. This regenerative hydraulics system also added cylinder end-stroke damping, a “bucket shake” feature, automated boom suspension and auxiliary venting. Loading cycles also were 20 percent faster, and the system delivered a 15 percent reduction in fuel consumption. Further evidence of JCB’s experience developing both hydrostatic and powershift transmissions emerged with the 2015 introduction of the ultra-compact Loadall 525-60 HiViz with a hydrostatic transmission, full-sized spacious cab and exceptionally low boom mounting design to maximize visibility. The compact machine is just 6 ft (1.8 m) high and 6 ft. wide. Since its introduction in 1977, it took almost 30 years for JCB to sell the first 100,000 Loadalls, but it has taken less than 10 years to sell the subsequent 100,000 — a testament to the growing importance of the product and JCB’s strength and dedication in this sector. For more information, visit jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
SECTION
Attachments Pages 44-49
For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
For Excavators...
Doosan’s New Power Tilting Coupler Allows for 180 Degrees of Movement The new power tilting coupler is approved for Doosan excavators: the DX63-3 compact model; DX140LC-5 through DX255LC-5 crawler models; and DX140W-5 through DX210W-5 wheel models. Hilti X-Change module (X-CM) core bits can be retipped right on the job site in just a few minutes using only a simple screwdriver.
Hilti X-CM Core Bits Feature Easy Removal
Doosan’s new power tilting coupler, provides increased excavator flexibility, versatility and precision when digging trenches, general excavation applications and final grading tasks. The new power tilting coupler is approved for Doosan excavators: the DX63-3 compact model; DX140LC-5 through DX255LC-5 crawler models; and DX140W-5 through DX210W-5 wheel models. With the new coupler, Doosan excavator operators can angle a trenching or ditching bucket 67 degrees left and right for up to 134 degrees of flexibility. Excavator operators can save time when using the coupler because they will not have to reposition the excavator as frequently while working, or stop to change attachments to perform certain
tasks, according to the manufacturer. The Doosan power tilting coupler provides precision while digging and can work under or around objects, such as an underground pipe, to complete excavating tasks. Additionally, the coupler can eliminate the need for multiple attachments on a job site. This can be most beneficial for operators working in general excavation, underground utility, landscaping and grading, and erosion control applications. In demolition applications, the ability to tilt a breaker attachment can help excavator operators reach concrete without repositioning the machine. For more information, visit DoosanEquipment.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Hilti X-Change module (X-CM) core bits can be re-tipped right on the job site in just a few minutes using only a simple screwdriver. Simply replace a worn X-CM module with a new module instead of replacing the entire core bit. Hilti X-CM core bits offer contractors additional productivity by enabling fast and easy core removal and fast bit removal in the event a bit becomes stuck in the concrete. Contractors will find having one barrel and three X-CM modules is comparable to three complete bits, and since replacing a module is less expensive than buying an entire new bit, it is more cost effective, according to the manufacturer. Also, modules are easier to store and transport than complete bits, giving you the ability to always have a backup. The LCS X-CM module provides best in class speed while wet coring and users can switch to dry hand held coring in un-reinforced masonry easily by changing to the LM module. The LCL X-CM module offers best in class life in wet coring, according to the manufacturer. Available in a wide range of diameters from 2 to 8 in. (5 to 20 cm), the Hilti X-CM module retips, renews and restores core bit life. For more information, call 800/879-8000 or visit www.us.hilti.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • May 25, 2016 • Page 45
Mobro Marine Sells CRANE PARTS You will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directly from the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does this mean we have the part you need in stock, it also saves you money. Because we buy in volume, we can buy for less and pass the savings on to you. We sell high quality genuine OEM parts from the following manufacturers: • Terex • American • Bucyrus-Erie • P&H • Kobelco • Koehring • Lorain • Northwest Crane
THIS MONTH’S SPECIALS 2082500022 - Two turntable bearings for a Komatsu
21400N3354F2P1 - One turntable bearing for a Kobelco
PC400-3. Avon# 2055B3 ................................$7,175 Each
907C or K907C. Avon# 1447B2 ..............................$4,850
2072500022 - Two turntable bearings for a Komatsu
KBB0282 / D28001 - One Link-Belt turntable bearing for
PC300-3. Avon# 1555B3 ................................$4,475 Each
a LS3400C. Avon# 1249B5 ......................................$3,950
2052500021 - Two turntable bearings for a Komatsu
TH103075 - One John Deere turntable bearing for
PC200-3. Avon# 1148B4 ................................$3,450 Each
model 792. Avon# 1556B8 ......................................$3,500
24100N418F1 - One turntable bearing for a Kobelco 909.
TH108810 or AT190766 - One John Deere turntable
Avon# 1551B9 ..........................................................$2,075
bearing model 490D and 495D. Avon# 1143B9 ....$1,100
Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime. We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type.
Please Contact Billy Harper or Tony Cruz at 904-733-1822 Hablamos Español
www.mobromarine.com/parts/php
MOBRO MARINE, INC.
Page 46 • May 25, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide
985! 1 e c n Si
NEW, USED & REMAN PARTS • • • • • • • •
Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!
www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com
Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • May 25, 2016 • Page 47
Page 48 • May 25, 2016 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide
Vacuworx HL Series Lifters Offer Safer Way to Handle Concrete Barriers on Site Designed for use with a variety of equipment, including excavators and backhoes, the HL Series lifters connect easily and work with the host’s hydraulic system. Elastomer grips provide superior performance with full surface contact without damaging material. It is equipped with a hydraulic lock for safety to prevent loss of load if hydraulic pressure is lost.
CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES
ENGINEERED TO PERFORM DURABLE BY DESIGN ypical .200” wall thickness
• Kits to operate most any attachment • Welded tube ends for maximum strength & durability • OEM style ORFS or CD62 4-bolt flange • Higher safety standards • Efficient designs with fewer connections • Conversion and upgrade kits available for OEM factory kits
www.hctkits.com www.hctkits.com • 888.603.0080 • sales@hctkits.com
Highway construction projects can be particularly challenging, especially when space is limited, roadways are crowded and time is short. Time and budget constraints make it necessary to get the work done faster. Traffic-heavy construction locations make safety a priority. To meet these jobsite demands, Vacuworx introduces the new HL Series hydraulic barrier lifters — a smarter way to handle concrete barriers. Vacuworx has always worked closely with customers to identify needs and develop new products to serve them. The traditional method of moving concrete road barriers with slings and chains is slow and lacks control. Having workers walk with the barrier to balance and position it puts them in harm’s way. So Vacuworx listened to customers who wanted a faster, safer way to do the job and created the new HL Series hydraulic barrier lifters. Designed for use with a variety of equipment, including excavators and backhoes, the HL Series lifters connect easily and work with the host’s hydraulic system. Elastomer grips provide superior performance with full surface contact without damaging material. It is equipped with a hydraulic lock for safety to prevent loss of load if hydraulic pressure is lost. With 360 degree rotation, the HL Series is perfect for maneuvering in confined spaces during road, bridge and highway applications. Precision handling capabili-
ties and wireless remote operation from the cab of the host machine makes loading, unloading and installation fast and easy — without the need to have someone guide the barrier on the ground every step of the way. In addition, environmentally friendly Vacuworx hydraulic lifting systems produce near zero noise and air pollution, providing the ideal solution for construction sites within city limits or with strict emission guidelines. The HL B1 is designed to lift concrete road barriers up to 6,000 lb. (2,721 kg) and 12 ft. (3.6 m) long. The HL B2 can handle barriers up to 16,000 lb. (7,257 kg) and 30 ft. (9 m) long. They are the ideal solution for construction contractors, government authorities, security agencies and military personnel tasked with the fast and efficient moves, lifts or installations of concrete road barriers. Quick-couplers are available for virtually all host machines. The Vacuworx commitment to safety ensures that the HL Series hydraulic barrier lifters meet or exceed all global safety and engineering standards, including OSHA, ISO, ASME and CE. For more information, call 918/259-3050 or visit vacuworx.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • May 25, 2016 • Page 49
North American Attachments
800-380-8808 www.excavator-attachments.com
Excavator Attachments
USED PARTS FROM THOMPSON MACHINERY Used Caterpillar® parts from Thompson offer a great value for replacing or repairing industrial heavy machinery. And because the part is made by Caterpillar, you’ll know you’re getting a reliable product that won’t let you down when you need it most.
Compaction Wheels
Ditching Cleaning Bucket Drain Holes Optional
Dual Action Grapples
Hydraulic Thumbs
• Used Parts and Attachments including Cat® cabs, OROPS, buckets, more • Used, Rebuilt, and Exchange Components including final drive parts, pumps, differentials, travel motors, more
• If we don’t have your part in stock, we can locate it with our nationwide Parts Locator Network. We also buy used and salvage equipment.
Ripper Tooth
Call Thompson Machinery at 615.259.5820 (Fax: 615.793.2428) or check out our inventory online at www.thompsonmachinery.com/parts/used-parts
Severe Duty & Rock Excavator Buckets
Tree Stumpers
Pin Grap Couplers
Skidsteer Attachments
Grapple Rakes
Grapple Buckets
Skeleton Buckets
Loader/Backhoe Attachments
Fork Carriages & FORKS
Loader Rake w/Grapples
All Sizes... Manual & Hydraulic Thumbs
Dozer Rakes
General Purpose Loader Buckets
Quality Construction Attachments
Page 50 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 51
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248
Link-BeltŽ Spin AceŽ Excavators are packed with all the power, productivity, DQG IXHO HI¿FLHQF\ \RXœYH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV ‡ 5RRP\ UHGHVLJQHG FDE
QUEST CONSTRUCTION EQUIPMENT, LLC www.questequip.com 10561 Airline Hwy. St. Rose, LA 70087 504-467-7663 Fax: 504-467-3722
HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458 364 Bob Jobe Rd. Gray, TN 37615 855-201-7453 10110 Roberts Way Covington, GA 30014 770-788-0888 7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955
Gonzales, LA 225-450-6425
‡ +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU ‡ &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV ‡ Extended service intervals
BENNETT EQUIPMENT & SUPPLY
‡ )RXU PRGHOV Ć? ĆŽ WR Ć? ĆŽ WDLO VZLQJV
CROSBY EQUIPMENT COMPANY, INC.
‡ 7LHU $ FHUWL¿HG ,VX]X HQJLQHV
www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664
‡ \HDU VXEVFULSWLRQ WR 5HPRWH&$5(ÂŒ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ <RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW
631 Electric Avenue Swainsboro, GA 30401 478-237-8372
MID SOUTH MACHINERY, INC. 3233 Highway 80 West Jackson, MS 39204 601-948-6740
Model #
Operating Weight
Net hp @ rpm
Tail Swing
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
ML CRANES & EQUIPMENT www.mlcranes.com 3908 N. Graham St. Charlotte, NC 28206 877-649-7739
3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553
GS EQUIPMENT INC. 14336 Seaway Road Gulfport, MS 39503 228-867-1555
MAY HEAVY EQUIPMENT www.mayequip.com 5423 US-70 Bus. Clayton (Raleigh), NC 27520 866-629-3784
*75 X3 and 80 X3 engines are Final Tier 4
www.bennettequipment.net 1403 Piedmont Hwy. Piedmont, SC 29673 864-277-7272
www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892
GREAT SOUTHERN CONSTRUCTION EQUIPMENT www.gsequipment.net Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400
Page 50 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 51
LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248
Link-BeltŽ Spin AceŽ Excavators are packed with all the power, productivity, DQG IXHO HI¿FLHQF\ \RXœYH FRPH WR H[SHFW IURP XV DORQJ ZLWK D PLQLPXP VZLQJ UDGLXV GHVLJQ IRU EHWWHU PDQHXYHUDELOLW\ DW VLWHV ZKHUH ZRUN VSDFH LV DW D SUHPLXP 7KRXJKWIXO UHGHVLJQ RI FRXQWHUZHLJKWV DQG ERRP SODFHPHQW PDNHV WKHP LGHDO IRU UHVLGHQWLDO FRQVWUXFWLRQ XWLOLW\ ZRUN DQG VSHFLDOW\ WUHQFKLQJ MREV ‡ 5RRP\ UHGHVLJQHG FDE
QUEST CONSTRUCTION EQUIPMENT, LLC www.questequip.com 10561 Airline Hwy. St. Rose, LA 70087 504-467-7663 Fax: 504-467-3722
HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458 364 Bob Jobe Rd. Gray, TN 37615 855-201-7453 10110 Roberts Way Covington, GA 30014 770-788-0888 7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955
Gonzales, LA 225-450-6425
‡ +LJK GH¿QLWLRQ IXOO FRORU Ǝ /(' PRQLWRU ‡ &RQYHQLHQW JURXQG OHYHO VHUYLFH DQG ÀXLG FKHFNV ‡ Extended service intervals
BENNETT EQUIPMENT & SUPPLY
‡ )RXU PRGHOV Ć? ĆŽ WR Ć? ĆŽ WDLO VZLQJV
CROSBY EQUIPMENT COMPANY, INC.
‡ 7LHU $ FHUWL¿HG ,VX]X HQJLQHV
www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664
‡ \HDU VXEVFULSWLRQ WR 5HPRWH&$5(ÂŒ WHOHPDWLFV $OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ <RXU /LQN %HOW ([FDYDWRU GHDOHU KDV WKH ULJKW 6SLQ $FH IRU \RXU DSSOLFDWLRQ DORQJ ZLWK XQFRPSURPLVLQJ VHUYLFH DQG VXSSRUW WR NHHS WKHP SHUIRUPLQJ DW WKHLU EHVW
631 Electric Avenue Swainsboro, GA 30401 478-237-8372
MID SOUTH MACHINERY, INC. 3233 Highway 80 West Jackson, MS 39204 601-948-6740
Model #
Operating Weight
Net hp @ rpm
Tail Swing
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
; 6SLQ $FH
OEV
KS # USP
Ć? ĆŽ
ML CRANES & EQUIPMENT www.mlcranes.com 3908 N. Graham St. Charlotte, NC 28206 877-649-7739
3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553
GS EQUIPMENT INC. 14336 Seaway Road Gulfport, MS 39503 228-867-1555
MAY HEAVY EQUIPMENT www.mayequip.com 5423 US-70 Bus. Clayton (Raleigh), NC 27520 866-629-3784
*75 X3 and 80 X3 engines are Final Tier 4
www.bennettequipment.net 1403 Piedmont Hwy. Piedmont, SC 29673 864-277-7272
www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892
GREAT SOUTHERN CONSTRUCTION EQUIPMENT www.gsequipment.net Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400
Page 52 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Pages 53-60
Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
FAE USA Holds Its 10th Annual Open House Event
T
he staff of FAE USA Inc. hosted their 10th annual Open House event on April 28 at their North American headquarters in Flowery Branch, Ga. The open house-demo has grown in attendance every year and this year’s turnout was more than 200 guests. The festivities kicked off with breakfast and an opportunity for attendees to leisurely explore the FAE USA headquarters facility. Guests saw various departments and static displays of machines and attachments, both inside and out. After machine demonstrations and presentations, attendees enjoyed a lunch of slow-cooked pulled pork, pulled chicken, Brunswick stew and an array of side dishes catered Enjoying the events of the day (L-R) are Sylvain Benoit, by a local favorite, Pig-N-Chik. FAE USA’s Giorgio Carera presented awards for largeGB Equipment Inc., Quebec, Canada; Alex Musa, SNA Manufacturing, Acworth, Ga.; and Ken Pryzgoda, KP volume dealers, innovators and manufacturers and dealers Sales & Marketing, Greely, Colo. who have consistently supported the annual event. Some of the local dignitaries on hand for the days’ events included Stan Brown, city manager of the city of Oakwood, Ga., and Shelley Davis, Greater Hall Chamber of Commerce. Carera also presented a substantial donation to special guest, combat hero and Wounded Warriors in Action representative John Keeney, who was one of the feature speakers. Machine demonstrations were conducted off site and on the grounds of FAE USA. Several guest speakers had informative presentations of their products and many prize drawings were announced and awarded throughout the day. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
(L-R): Cowin Equipment Company’s Andrew Bell and Ryan Gastley talk with HKX Southeast Regional Manager Terry North about FAE’s excavator attachments.
Special guest, combat hero and Wounded Warriors in Action representative John Keeney (L), joined FAE USA’s president Giorgio Carera at the event. Keeney was one of the featured speakers.
see FAE page 60
Watching the demo event to see how the newest FAE products could benefit their company’s productivity (L-R) are Joe Vail, Miller Group, Morrow, Ga.; Jeff Betcher, Sanders Brothers Construction, Charleston, S.C.; and Doug Myers, Blount Construction, Marietta, Ga.
Opening up and discussing the power plant in the PrimeTech PT-175 are FAE USA’s John DalBianco (L) and Jonathan Cummings of Black Pine Farms, Fairview, Tenn.
(L-R): Looking over the mulching attachments on display are Tennessee’s FAE distributor representatives Chad Morgan, Mark Alardice and Robbie Binkley, all of Tuff Equipment, based in the Nashville area.
Local FAE distributor, Tim Chupp (L) of Mason Tractor, McDonough, Ga., talks with his FAE regional representative, Earl Alsobrook.
Page 54 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
HIGH-QUALITY MACHINES AND PRODUCT SUPPORT
Get high-quality Stowers Machinery Coverage Area for Screen Machine Screen Machine products, plus topnotch parts and service support, from Stowers Machinery Corporation throughout the state of Tennessee and in southeastern Kentuckyy, southwestern Virginia, western North Carolina, northern Georgia, and northeastern Alabama.
Screen Machine Industries Introduces Cone Crusher
Offering equipment made in the USA from Screen Machine Industries is another way that Stowers Machinery helps you acquire the equipment you need. Visit our website at screenmachine.stowerscat.com or call us to learn how Stowers and Screen Machine can add value to your business.
Call toll-free 800.362.9690 © 2016 Stowers Machinery Corporation. All rights reserved. © 2016 Caterpillar. All rights reserved. CA ATT, CA ATERPILLAR, TEERPILLAR, BUILLTT FOR ITT,, their respective logos,“Caterpillar logos,“Caterp pillar Yeellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Screen Machine Industries’ CXT cone crusher is a mid-sized track-mounted unit that boasts a heavy-duty 40 in. (101 cm) high-speed bushing cone with hydraulic adjustment and tramp relief. Creatively designed for both function and efficiency, the CXT offers high production of cubical-shaped material within a compact overall footprint. It is driven by a Caterpillar C-13 415 hp (310 kw) ACERT diesel engine and the wireless remote capability makes it a perfect fit with our other track mounted crushers and screens to form a complete portable system. The unit’s structural frames and fabricated wear components made of Grade 80 steel. For more information, call 800/837-3344 or visit www.screenmachine.com.
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 55
Complete Crushing & Screening Plant • Magnet! • Radio Remote Control! • Burns Less Fuel! • No Transport Permits!
Produces Up To Four Piles! (4) Stock Plus Scrap Steel!
• MAKE YOUR OWN BEAUTIFUL MATERIAL!
• STOP WAITING FOR CRUSHING CONTRACTORS!
• STOP PAYING HIGH RENTAL RATES!
• STOP PAYING HIGH TRUCKING COSTS!
• STOP PAYING “DUMP/ LANDFILL” FEES!
• LOW INTEREST RATES, LOW PAYMENTS!
Page 56 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Purpose-built
from the ground up by Material handlers from SENNEBOGEN – 444,000 4,000 llbs. bs. tto o 75 7750,000 0,000 llbs. bs. Simple S imple design… design… Lift Lift more. morre. Mov Movee faster.. Save Save fuel. fuel. Run Run longer. TRACTOR & EQUIPMENT CO. Alabaster, AL 205-621-2489 Anniston, AL 256-831-2440 Birmingham, AL 205-591-2131 Decatur, AL 256-355-0305 Dothan, AL 334-678-1832 Mobile, AL 251-457-8991 Montgomery, AL 334-288-6580
Shoals Area, AL 256-383-5666 Tuscaloosa, AL 205-752-0621 Panama City, FL 850-763-4654 Pensacola, FL 850-505-0550 Albany, GA 229-435-0982 Atlanta, GA 404-366-0693 Augusta, GA 706-798-7777 www.tractor-equipment.com
Calhoun, GA 706-879-6200 Columbus, GA 706-562-1801 Hoschton, GA 706-654-9850 Kennesaw, GA 678-354-5533 Macon, GA 478-745-6891 Savannah, GA 912-330-7500
POWER EQUIPMENT COMPANY Knoxville, TN 865/577-5563 LaVergne, TN 615/213-0900 Chattanooga, TN 423/894-1870 Kingsport, TN 423-349-6111 Memphis, TN 901-346-9800 Saltillo, MS 662-869-0283 www.powerequipco.com
ATLANTIC EQUIPMENT & SUPPLY Hampton, VA 23661 757/827-4778 800/325-0461 www.aeandsupply.com
ASC CONSTRUCTION EQUIPMENT USA, INC. Asheville, NC 828-687-0620 Charlotte, NC 704-596-8283 Greenville, NC 252-754-5280 Raleigh, NC 919-661-8710 Charleston, SC 843-414-1120 Columbia, SC 803-791-0740 Piedmont, SC 864-704-1060 www.ascvolvo.com
GS EQUIPMENT INC.
LYLE MACHINERY
Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Fort Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892
Jackson, MS 800-898-4000 Fax: 601-939-8440 Gulfport, MS 228-832-7575 Hattiesburg, MS 601-296-7556 Magnolia, MS 601-783-2111 www.lylemachinery.com
GREAT SOUTHERN CONSTRUCTION EQUIPMENT Jacksonville, FL 904-268-4400 Orlando, FL 407-859-9160 www.gsequipment.net
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 57
Terex® Minerals Processing Systems
Terex Cedarapids CRC450X
Game Changing Modular,Portable & Static Powerscreen Mid-Atlantic supply Terex Cedarapids & Terex Simplicity equipment to the Carolinas and Virginias. Contact Your Local Powerscreen Mid-Atlantic Dealer Powerscreen Mid-Atlantic, Inc, PO Box 2505, Kernersville, NC 27285 T: 1-800-797-7276 E: sales@powerscreenmidatl.com W: www.powerscreenmidatl.com
Terex Simplicity M Series
Page 58 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO
MC 110 Zi EVO Continuous Feed System
MC 110 Ri EVO High-tech jaw crusher
Direct drive via fluid clutch
High production, quality product with maximum efficiency, the all new Kleemann EVO jaw crusher.
ROAD AND MINERAL TECHNOLOGIES
www.wirtgenamerica.com
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 59
Page 60 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
CRUSHING PLANTS
We Call It EXPERTISE. You Call It PEACE OF MIND.
SCREENING Plants
IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.
Closed-circuit PLANTS
For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.
Crush. Classify. Profit.
w w w. i r o c k c r u s h e r s . c o m
Event Includes Off-Site Demos of FAE USA Machines FAE from page 53
Discussing the product demonstrations are (L-R) Kyle Fretwell, Mid-State Land Clearing, Nashville, Tenn.; Dallas Zeller, Victor L. Phillips Co., Kansas City, Mo.; Ray Jarman, Forest To Farm Land Clearing, Clinton, N.C.; Bill Bruner, Equipment & Parts, Longview, Texas; and FAE Texas regional representative, Ryan Smith.
(L-R): Fred Choate, Andy May and Troy Hill of Granite Construction, Birmingham, Ala., came to see the machine and attachment demonstrations and how they might be used in their operations.
Chris Wilson (L) of Wilson Excavation & Land Clearing, Nashville, Tenn., and Josh Murphy, American Excavation, also of Nashville were checking out the new Takeuchi TL12V2 compact track loader on display.
FAE USA’s Earl Alsobrook (L) talks to one of his attachment distributors, James Jewell of TriGreen Equipment in Alabama.
Many door prizes were awarded, including this Yeti soft-sided cooler to John Hoffmann (Second from L) of Atlantic & Southern Equipment, Morrow, Ga.
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 61
Page 62 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Carolina CAT Demonstrates Rebel Crusher’s Ability to
C
The Rebel Crusher creates four products at one time: dirt from the grizzly screen, three different aggregate sizes from the dual deck screening system and any metal that is found in the base material is removed via a magnet.
(L-R): Joe DiNinno, Bob Rossi Sr. and Bob Rossi Jr., all of RR Equipment stand ready to answer questions about the Rebel Crusher.
(L-R): Alan Goodman, Mike Henrickson, Jerry Lambert and Keith Wayne, all of Wayne Brothers in Davidson, N.C., listen to Mitch Christenbury of Carolina CAT go over the features of the crusher.
Bob Rossi Jr. (R), RR Equipment, explains the operational benefits of the Rebel Crusher to (L-R) Doug Parton of Carolina CAT; Johnny Pace of Tar Heel Paving in Hendersonville, N.C.; and Bob Rossi Sr., RR Equipment.
(L-R): Paul Carpenter and John Crocker, both of Carolina CAT, look over the 1 ½ inch minus product with Doc McGee of McGee Brothers in Monroe, N.C.
(L-R) are Patrick Tucker, Yadkin Valley Paving in Winston-Salem, N.C.; Wes Bumgardner and Mike Farmer, both of John E Jenkins Inc., Gastonia, N.C.; and Jonathan Law and Mitch Christenburry, both of Carolina CAT.
arolina CAT held a Rebel Crusher product demonstration event on May 10. Approximately 60 people from 25 area contractors attended the event. The Rebel Crusher is able to produce a finished product. The machine has the ability to make up to four screened products at the same time. Rebel’s crushed material can be used in place of quarry crushed stone. Uses also include pipe bedding, driveway bibs, home garages, decorative stone and landscaping applications. A large feed opening reduces material preparation time. The Rebel Crusher produces high quality products without excessive fines. The Rebel Crusher has the ability to swap from a jaw crusher to an impact crusher or vice versa in a matter of hours. Pre-screen and finish screen ensures quality products are produced. The Rebel Crusher can tackle many applications. It has the ability to pre-screen, crush and separate crushed material into four separate stock piles while removing rebar, wire and steel at the same time. The Rebel Crusher can track and crush without stopping. The Rebel can crush and screen asphalt, concrete with or without wire and rebar, brick, block, most rock, sand, clay, glass and more. The Rebel can track into the middle of a city and is inconspicuous. The unique discharge conveyor heights are deliberately lower to minimize dust production. The fuel efficient diesel engine is quiet and is able to power up to three additional conveyors. Variable speed, low feed height, heavy duty feeder, features “mine duty” impact idlers with 4140 oversize steel shafts specifically designed to handle being continuously fed large chunks of material. When dumping, the feeder absorbs the shock load, producing very little dust and reduced noise. Having the feeder on an angle allows the loader operator to see what is in the Feeder/Hopper. No need to build a ramp or have a huge machine to feed the Rebel. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
(L-R): Will Wood and Tony Pennington, both of Carolina CAT, and Wes Bradley of Draw Enterprises in Charlotte, talk about the uses of the product produced by the Rebel Crusher.
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 63
Produce Up to Four Screened Products During Event
(L-R): Chad Payne and Matt Brooks, both of Crowder Construction in Charlotte, talk with Gary Jarvis of Carolina CAT about the different types of material that can be crushed and separated by the Rebel Crusher.
Chip Hill (L) of the town of Pineville, N.C., and Chris Mowbray of Carolina CAT go over the range of products that can be crushed and made into usable products by the Rebel Crusher.
(L-R) Mark Kincer, Carolina CAT; Mark Turner and Michael Smith, both of S.M. Smith & Son Clearing & Grading; Ed Weisiger Sr., Carolina CAT; and John Crocker, Brian Sailers and Paul Carpenter, all of Carolina CAT, attend the event.
The Rebel Crusher features a large feed opening, which can accommodate a load from a Cat 299D compact track loader.
Various sizes of stone, concrete, dirt and rocks are loaded into the Rebel Crusher.
Tony Loftin (L) of T.D.L Construction in Charlotte inspects some of the finished product produced by the Rebel crusher and talks about it with Rusty Lipe of Carolina CAT.
Ed Weisiger Sr. (L), Carolina CAT, welcomes Steve Nearhood (R) of Blythe Construction to the demonstration.
(L-R): David Ferebee, Ferebee Construction Company, and Will Wood and Jonathan Law, both of Carolina CAT., discuss operating the Rebel Crusher via remote control.
Page 64 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Palmetto Recycling Finds Complete Scrap Handling Solution When Palmetto Recycling chose a Sennebogen purpose-built scrap handler, the company went for the complete package deal. John Grant had recently come onboard as general manager of Carolina Salvage, a fullservice automotive recycler near Charlotte, N,C., Grant had plenty of experience with heavy equipment and knew that since the firm had been experiencing difficulties with its existing machines, that it was time to consider a new one. His employer, Neil Morris, is a third-generation recycler. His grandfather first went into the scrap business in 1931, and his family had been operating Carolina Salvage since 2009. The two men got their first look at a Sennebogen scrap handler at a trade show, and agreed to look further into the green machines. “We checked them out online,” said Grant, “and watched a number of videos to see how they run. We could see that these were well-built machines, so we called ASC.” ASC Construction Equipment, Sennebogen’s distributor in the Carolinas, had Rob Jordan, material-handling specialist, follow up with Carolina Salvage. Morris and Grant took delivery of a new purposebuilt Sennebogen 818 M rubber-tired material handler.
grapple. The company feels that the attachment reflects the same quality as the 818 machine. “It’s well built. The cylinders are nice and protected, and the cut-off valves make it easy to work with from a servicing perspective,” they noted. “The handling is very precise, with a good touch on the hydraulics.” After seven months of operation, Grant is convinced that his Sennebogen solution was the right choice for Palmetto Recycling. “With the 818’s automatic shutdown feature and great fuel economy, the fuel savings make the economics very good for us. ASC is a new supplier for us. We’re very pleased with what we’ve seen and we’re now considering ASC for some additional equipment we need.” For more information, call 704/347-4910 or visit www.sennebogen-na.com (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
(L-R) are John Grant, Neil Morris and Robbie Childers, operator, all of Carolina Salvage.
Speed, Strength and Precision “We chose the 818 M because it’s compact enough to maneuver in tight lanes, but it’s big enough and strong enough to do the job,” Grant said. Up to 90 percent of the material handled at Carolina Salvage is cars and trucks. The scrap handler dedicates most of its time to loading cars onto trucks. For the balance of its shifts, the machine moves mixed materials for sorting, separating aluminum, ferrous material and large components, including transmissions and engine blocks. A forklift is used to load cars onto the crusher. “We went with the rubber-tired model. I had tracked machines in the past, but our yard is level and packed down,” said. “We have about 30 acres, and the machine has to travel about 100 yards on each circuit. With wheels, it has the speed to cover the ground pretty quickly. Our operator just loves it moving around the facility. The ‘creature comforts’ and the ergonomics in the cab work for him. It’s very stable, even with the cab fully elevated. On top of that, the dual cameras help to give us a much safer environment for our employees and our customers.” One-Stop Solution To round out the package, ASC equipped its 818 with Sennebogen’s own orange peel
This Green Efficiency 818 M E-Series is used on a Sennebogen grapple to maximize its productivity.
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 65
www.thompsonmachinery.com Camden, TN • 731-584-2732 Clarksville, TN • 931-552-5496 Columbus, MS • 662-327-3083 Cookeville, TN • 931-646-3200 Greenwood, MS • 662-453-5233 Jackson, TN • 731-988-4240 La Vergne, TN • 615-256-2424 Manchester, TN • 931-461-5000 Memphis, TN • 901-332-3051 Tupelo, MS • 662-844-1634
www.thompsontractor.com Birmingham, AL • 205-841-8601 Dothan, AL • 334-671-1040 Huntsville, AL • 256-532-1776 Mobile, AL • 251-626-5100 Montgomery, AL • 334-215-5000 Oxford, Anniston, AL • 256-831-4104 Panama City, FL • 850-785-4007 Pensacola, FL • 850-471-6700 Shelby County, AL • 205-664-4833 Tuscaloosa, AL • 205-247-2800
louisianacat.com Alexandria, LA • 318-443-2577 Bossier City, LA • 318-746-2341 Hammond, LA • 985-340-2820 Lafayette, LA • 337-837-2476 Lake Charles, LA • 337-439-3601 Monroe, LA • 318-323-1345 Prairieville, LA • 225-673-3480 Reserve, LA • 985-536-1211
www.ringpower.com Daytona Beach, FL • 386-947-3363 Gainesville, FL • 352-371-9983 Lake City, FL • 386-755-3997 Lakeland, FL • 863-606-0512 Ocala, FL • 352-732-2800 Orlando, FL • 407-855-6195 Palm Bay, FL • 321-952-3001 Riverview, FL • 813-671-3700 St. Augustine, FL • 904-737-7730 Sarasota, FL • 941-359-6050 Tallahassee, FL • 850-562-2121
COMMITTED TO YOUR
SAFETY Solve safety issues and you’re ready for work—without interruptions. That’s why the new Cat® MH3037 reduces slips, trips and falls with ground-level cab access—whether the cab is in front, behind or to one side of the machine. Combine that with a rear-view camera, sensors that prevent out-of-position operation and other safety features, and you have a machine that’s built for business. Your business.
www.kellytractor.com 8255 NW 58 Street Miami, FL 33166 888-502-8033 • 305-592-5360 Davie, FL • 954-581-8181 West Palm Beach, FL 561-683-1231 Clewiston, FL • 863-983-8177 Fort Myers, FL • 239-693-9233
Cat.com © 2014 Caterpillar • All Rights Reserved • Printed in USA logos, “Caterpillar Yellow,” the “Power Edge”trade dress as well as ATERPILLAR, TERPILLAR, BUILLTT FOR ITT,, their respective resp CAT, CA corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Page 66 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Atlas Copco Introduces New Bucket Crusher Atlas Copco Construction Equipment introduced its new generation of bucket crusher attachments that offer higher output and greater reliability than previous models. The new bucket crushers — the BC 2500 and BC 3700 — process about 80 percent more material due to their hydraulic drive system. The BC 2500 fits 24- to 33-ton carrier weight classes, and the BC 3700 fits 30- to 42-ton carrier weight classes. Atlas Copco debuted the new bucket crushers during bauma 2016 in Munich, Germany. “The new bucket Atlas Copco launched its new generation of hydraulic bucketcrusher attachments during bauma 2016. The new units process as much as 110 tons (98 t) per hour and fit 49,000to 85,200-lb. carriers.
crushers allow contractors to increase the versatility of carriers, especially on demolition, recycling and road construction applications,” said Rich Elliott, Atlas Copco product manager, hydraulic attachments. “The powerful drive systems and high reliability make them an ideal alternative to mobile jaw crushers for cramped worksites. Plus, they can process a wide range of materials, including aggregate, asphalt and concrete.” The attachments feature powerful components that allow carrier operators to crush as much as 110 tons (98 t) of material per hour. The drive system — two hydraulic motors and a timing belt — generates the high torque needed for powering the crushing jaw. The attachments also feature a reverse function to easily remove any blockage by pushing material back through the inlet. Crushing material on site allows contractors to save on transportation costs to a landfill or processing center since they can fit more material in each truck load. They also can reuse the crushed material on site as backfill, which reduces the costs associated with hauling in material. Atlas Copco designed the attachments for high reliability and maximum uptime in challenging worksite conditions. For example, Atlas Copco’s internally mounted drive system eliminates protruding components to minimize the risk of dust entering the hydraulic system and to protect key components from flying debris. Additionally, operators can control the diameter of the crushed materials by easily adjusting the jaw outlet without any special tools. This keeps set-up times to a minimum and allows operators to create varying material sizes, according to the manufacturer. For more information, visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Crushing, Screening Plant Offers Versatility, Portability The portable K300/6203CC is a highly-mobile crushing and screening plant designed to provide application versatility and serve as the perfect rental tool for producers in sand and gravel, quarry or recycle applications, according to the manufacturer. The K300/6203CC combines a heavy-duty, roller bearing Kodiak Plus K300+ cone crusher with a triple-shaft, low-profile horizontal screen. Its modular design offers flexibility for easily converting the plant to meet producer configuration requirements, resulting in a quick turnaround from order to delivery. Engineered with mobility in mind, the K300/6203CC has the axle configurations to fit all of your transportation requirements. In its closed-circuit configuration, the K300/6203CC allows producers to utilize a single chassis to produce up to three finished products or supplement existing demand in a small footprint, reducing the number of auxiliary conveyors required to get the job done. The closed-circuit plant also
The K300/6203CC combines a heavy-duty, roller bearing Kodiak Plus K300+ cone crusher with a triple-shaft, low-profile horizontal screen. Its modular design offers flexibility for easily converting the plant to meet producer configuration requirements.
offers the flexibility to convert to an open-circuit configuration by simply reversing the closed-circuit cross conveyor, according to Ian Pendergrass, product development manager of KPI-JCI and Astec Mobile Screens. “The new modular design
allows customers to easily convert the plant to meet their needs,” Pendergrass said. “For our dealers, we offer the ability to mount either a K200+ or K300+ cone crusher to the same chassis with minimal cone mount modifications and switchgear considerations, provid-
ing added flexibility to their rental fleets.” Multiple axle configurations are available to meet portability needs, making it ideal for producers on the move. Several product discharge chutes or cross conveyor options also are available, as well
as feed conveyor and feed conveyor drive options. For more information, visit kpijci.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 67
CLEAR THE W WA AY
FROM OUR SIGNA SIGNATURE ATURE TURE BULL HO HOG, OG, TO TRACKED CAR CARRIERS, RRIERS, TO FORESTR FORESTRY RY A ATT ATTACHMENTS, TTTACHMENTS, W WE HA HAVE AVE VE A RUGGED, DURABLE PRODUCT FOR EVER EVERY Y APPLICA APPLICATION. PPLICA ATION. TION. BUIL BUILT LTT BRUT B BRUTALLY TALL ALLLY TOUGH AND OPERA OPERATOR-FRIENDLY, ATOR-FRIEND TOR-FRIENDL DLLY, SO YOU CAN CLEAR CLEAR THE W WA WAY AY TO A JOB J WELL DONE.
800.528.3113
fecon.com
Page 68 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Yahara Materials Meets Demand for Clear Stone Products
Unified’s “W” style clean screens are made of straight tension, Wshaped and custom cross wires.
Nick Cady, superintendent of operations at Yahara Materials.
Increasing production and maximizing throughput is nothing new. In fact, next to sizing accuracy, a recent survey shows that throughput is the second largest concern amongst producers, when surveyed to rank the factors most important when selecting screening media. But what happens when external factors such as market growth and adverse weather conditions impact your operation’s ability to meet the increasing demand and capture your market share? Here’s how one producer teamed with his local screening and crushing field specialist. Over the past 15 years, Yahara Materials located in Waunakee, Wisc., has experienced a dramatic increase in demand for clear stone products. These products are widely used for underground pipe and highway bedding to provide proper drainage. The product specifications required clean rock with minimal fines. Yahara Materials needed to find a way to increase its capacity to effec-
Yahara, triple deck portable plant.
tively capture its share of this growing market. “We experienced a 15 percent increase in our production throughput,” Nick Cady stated. Yahara Materials operates seven 6 by 20, triple deck, portable crushing plants that were equipped with slotted, Tri-Lock screens. These slotted screens became very problematic when faced with ever-changing soil conditions found at various locations. Due to increased moisture content present during the winter and spring months they were unable to remove enough fines to get the product within specification. The slotted screens would blind over, halting production and minimizing throughput. Upon the evaluation and recommendation of Rod Skindrud, the local Unified Screening & Crushing Company field service representative, Nick Cady, superintendent of operations at Yahara Materials,
Portable crushing plant.
changed to a stainless steel “W” style screen on the lower two decks, while the top deck remained a hard drawn, high carbon square opening, Unified screen, for cost efficiency. This change greatly increased the flexibility of the screen and increased product flow. The “W” style screen is composed of straight tension wires, “W” shaped wires and custom cross wires. Three different wire sizes are used for a harmonic screening effect. This product allows greater open area and increases throughput with this “harmonic effect.” In addition, the “W” slots perform well during wet and difficult screening conditions. “Blinding and sizing problems can be eliminated. We have experienced a 15 percent increase to production since the change out to the “W”-slots and the “W” slot screens are lasting longer. They are lasting 2 to 3 times longer than anything we used in
this application, in the past,” according to Nick Cady. “The increase has allowed us to increase our capacity to capture our share of the growing demand for clear stone. Plus these clean screens have saved us an investment in a new Wash Plant for our concrete applications. Our production is up, throughput improved, especially in wet conditions, and we’ve saved an additional step in processing materials. It was a win-win decision.” Yahara Materials now uses “W” slotted screens on the bottom two decks of all its 6 by 20, Triple Deck plants. “We have not had to change them out all season,” said Cady. For more information, call 800/328-0225 or visit www.unifiedscreening.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 69
You Des Deser serve the Best. Beest From our most compact stump grinders and hand-fed chippers through our largest whole tree chippers and The Beast® recyclers, Bandit® equipment is built to make you money. We reduce your costs by maximizing fuel efficiency and reducing downtime. And we increase your income by producing the highest quality end product for your market. Bandit builds the best hand-fed chippers, stump grinders, whole tree chippers, The Beast recyclers, track carriers and skid steer attachments in the industry. And equally as important... Bandit Builds Your Bottom Line.
www.banditchippers.com | 1.800.952.0178 | Remus, MI - USA VISIT YOUR NEAREST AUTHORIZED DEALER ER LOCA ATION TION
SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)
STOWERS MACHINERY CORP www.bandit.stowerscat.com
Knoxville, TN (East) Knoxville, TN (West) Chattanooga, TN Kingsport, TN Crossville, TN Sevierville, TN
(865) 546-1414 (865) 218-8800 (423) 698-6943 (423) 323-0400 (931) 484-4040 (865) 595-3750
of Jacksonville
BOBCAT OF JACKSONVILLE www.bobcatjax.com
11657 Phillips Hwy Jacksonville, FL 32256 (904) 288-9181 (904) 288-9182 Fax (877) 213-9408 Toll Free
ACT CONSTRUCTION EQUIPMENT www.actconstructionequipment.com Charlotte, NC Winston-Salem, NC Wilmington, NC
(704) 323-7934 (336) 397-5000 (910) 254-3525
Page 70 • May 25, 2016 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide
Contractor Range Extends JCB’s Hydraulic Breaker Line
JCB’s new line of Contractor breakers includes (L-R) the HM049T, HM033T and HM160T models.
JCB now offers double the number of hydraulic breakers designed to work with its range of excavators, backhoe loaders and compact equipment lines by launching its “Contractor Hammer Range.” Contractor breakers will be available alongside the existing professional line of hydraulic hammers. Both Professional and Contractor breakers will come with a three-year warranty. Contractor breakers offer the following features: • Complete range for 0.9 to 55 ton (0.8 to 50 t) carrier machines • Accumulators to protect carrier machinery from hydraulic pressure spikes • Models above 12.1 tons (11 t) carrier weight equipped with auto greasing systems • Two-speed control valves permit tool speed and stroke customization above 9.9 tons (9 t) • Internal control valves deliver 10 percent efficiency boost Contractor hydraulic hammers have been
specifically designed as a solution for customers working in less arduous conditions. They provide a genuine JCB product for users on a budget who still want a good quality hammer that’s highly productive. Each hammer has been extensively tested and matched to work perfectly with JCB carrier machines, according to the manufacturer. The range includes models from the compact HM012T that tips the scales at just 220.5 lbs. (100 kg) operating weight to suit compact excavators, to models designed to work with the largest JCB excavators currently offered in North America, which fall in to the 22-ton (20 t) category. All models come backed by a three-year manufacturer’s warranty. All Contractor breakers have accumulators to protect the carrier machine from hydraulic pressure spikes, reducing possible wear and tear on the hydraulic system. They also are equipped with auxiliary relief valves to protect the breaker from damage when used with other makes of machinery. Hammers for use with equipment above
12.1 tons in operating weight come as standard with a refillable auto greasing system, ensuring the breaker always receives the correct amount of lubrication throughout the working day. This cuts downtime and boosts productivity for the customer. All breakers feature dust seals to prevent dust ingress and to ensure that lubrication remains inside the hammer body. The heavier models include twin oval tool retaining pins, which deliver double the life of a standard pin, as they can be rotated to wear evenly on both sides. Smaller breakers are equipped with a single tool retainer. Twospeed control valves on models above 9.9 ton carrier weight allow the operator to customize tool speed and stroke length, dependent on the material that is being broken. This increases productivity and reduces the risk of damage to the breaker and the carrier, according to the manufacturer. Internal control valves deliver up to 10 percent higher efficiency against other products with external valves. This results in less maintenance as the oil flow is improved,
reducing heat build-up in the system and protecting internal seals. Heavier models also feature blank firing protection, further cutting the potential for damage to the breaker and wear to the carrier machine. Contractor breakers use a single scaled design with the same maintenance requirements for each model. This ensures that dealer and customer service staff, particularly in a rental operation, can easily work on all hammers in the range. All JCB Compact, Contractor and Professional breakers are delivered ready to work, with the correct mounting brackets and hydraulic hoses to match a wide range of JCB equipment. Compatibility is guaranteed, and the full hydraulic hammer range is backed by JCB’s service network. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • May 25, 2016 • Page 71
CRUSHING
MATERIAL MA ATERIAL HANDLING HAN
SCREENING
TRACKS
www.highway-equipment.com g y q p
www.stoneequipmentco.com q p
WASHING W ASHING & CLASSIFYING CL www.kellytractor.com y
Orlando, FL L 32824-8728 32824 8728 407 850 9614
Jacksonville, FL L 32207 904 737 6000
Lake City, FL 32024 386 758 7444
ZZZ ÀDJOHUFH FRP J
The complete source for equipment in the aggregate, construction and recycling industries. Offering industry-leading brands such as the Vanguard Jaw Crusher, Kodiak® Plus Cone Crusher, SuperStacker® Extendable Stacker, ProSizer® Mobile Screening Plant, Combo® Screen, Vari-Vibe® High-Frequency Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, Global Track and FastPack.
www.kpijci.com
Page 72 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
WE DO MORE THAN DESIGN EQUIPMENT.
WE POWER YOUR SUCCESS.
Whether you are looking for products with the llatest atest ttechnology echnolog y or you want to have your old machine rremanufactured, emanuffactured, Doosan Por table Power can help you achieve success. Focused on ccustomer ustomer ssatisfaction atisffaction and product solutions, our de dealer aler netw network ork is the largest nationwide network in the ind industr y.
CONTTACT YOUR LOCALL DEALER DEAL TODAY. AIR COMPRESSOR SALES GEORGIA 5490 Thomaston Road Macon (478) 474-8460
PINNACLE CENTRAL COMPANY, INC. www.pinnaclecentral.com FLORIDA 103 Bryan Street Jacksonville (904) 354-5746 Polk City (888) 253-2444
ASC CONSTRUCTION EQUIPMENT NORTH CAROLINA 11425 Reames Rd Charlotte (704) 596-8283 Asheville (828) 687-0620 Raleigh (919) 661-8710
SOUTH CAROLINA Columbia (803) 791-0740 Piedmont (864) 704-1060 North Charleston (843) 414-1120
Greenville (252) 754-5280
TENNESSEE Knoxville (865) 525-1845
GEORGIA Savannah (912) 964-8079
Chattanooga (866) 495-3406
DoosanPortablePower.com | 800.633.5206
Sa Sales. les. P Parts. arts. Service. Service. BLANCHARD MACHINERY, INC. www.blanchardmachinery.net FLORIDA 1890 NE 150th St. Miami (305) 949-2581 Fax: (305) 949-0747 Miami (305) 232-2255 West Palm Beach (561) 833-4634
COWIN EQUIPMENT ALABAMA
FLORIDA
2238 Pinson Valley Parkway Birmingham (205) 841-6666
Pensacola (850) 479-3004
Mobile (251) 633-4020
GEORGIA
Montgomery (334) 262-6642
Atlanta (404) 696-7210
Huntsville (256) 350-0006 Oxford (256) 832-5053
LaVergne (704) 280-2762
©2016 Doosan Infracore Portable Power
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 73
UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.
MINI
SHORT RADIUS
CONVENTIONAL
KOBELCO-USA.COM
www.ScottCompanies.com Alexandria, LA 318-448-1647 Shreveport, LA 318-226-9696 Monroe, LA 318-388-9300 Little Rock, AR 501-455-5955
Ft.Smith, AR 479-648-1600 Springdale, AR 479-751-4242 Texarkana, AR 870-772-0204
Memphis, TN 901-547-8008 LaVergne, TN 615-793-3888 Jackson, MS 601-373-4600
Scott Van Keppel Omaha, NE 402-597-0860 Ankeny, IA 515-964-2762 Cedar Rapids, IA 319-365-9155
www.cowin.com
www.companywrench.com 125 Wilson Mills Rd. Smithfield, NC 27577 919-938-8145 Fax: 919-938-9129
Lexington, SC 803-520-0032 Fax: 803-520-7469 Knoxville, TN 865-766-2571 Fax: 865-766-2815
2238 Pinson Valley Pkwy Birmingham, AL 35217 205-841-6666 Mobile, AL 251-633-4020 Montgomery, AL 334-262-6642
Huntsville/Decatur, AL 256-350-0006 (Decatur) 256-536-9390 (Huntsville) Oxford, AL 256-832-5053 Pensacola, FL 850-479-3004 Atlanta, GA 404-696-7210
www.gsequipment.net GS EQUIPMENT Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892
GREAT SOUTHERN CONSTRUCTION EQUIPMENT Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400
Page 74 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Bucyrus Erie 22B Dragline, 1:50 Scale - $275
Caterpillar 330D L Excavator, 1:50 Scale - $110
Bantam Truck Crane, 1:50 Scale - $135
Caterpillar 365C L Front Shovel, 1:50 Scale - $100
John Deere Wheel Loader, 1:16 Scale - $90
Caterpillar 5110B Excavator, 1:50 Scale - $110
John Deere 470G LC Excavator, 1:50 Scale - $85
Caterpillar 769C Off Highway Truck, 1:50 Scale - $100
Allis Chalmers Forty Five Motor Grader, 1:50 Scale - $110
Caterpillar D250E Articulated Truck, 1:50 Scale - $100
Komatsu D375A Dozer, 1:50 Scale - $95
Caterpillar CT660 Dump Truck, 1:50 Scale - $90
Caterpillar D6K XL Track-Type Tractor, 1:50 Scale - $65
Case CX250C Excavator, 1:50 Scale - $175
Grove TM1500 Crane, 1:50 Scale - $150
Bobcat M400 Gold, 1:25 Scale - $30
Shipping and Handling Included
CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034
WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon
800-523-2200
Ext. 197
• 610-506-5961 Cell
Email – bmckeon@cegltd.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 75
Ready y. Set. Save on o Kubota’s U Series Compact Excavators.
$
0 Down, 0% Financing for 60 6 Months
*
A.P P.R.
Offfer fe ends 6/30/16. GROWERS EQUIPMENT CO.
CHARLOTTE TRACTOR
DITCH WITCH OF TENNESSEE
GREENSBORO TRACTOR
FUTCH’S TRACTOR DEPOT, INC.
2695 Davie Road Davie, FL 33314 954-916-1020 www.growers equipment.com
1700 Starita Road Charlotte, NC 28206 704-596-8900 www.charlottetractor.com
Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576 www.ditchwitchtn.com
2820 S. Elm-Eugene Street Greensboro, NC 27406 336-273-3606 www.greensboro tractor.com
8515 SR 207 N. Hastings, FL 32145 904-692-3673 www.futchstractor depot.com
COASTAL EQUIPMENT SYSTEMS 5287 New Kings Road Jacksonville, FL 32209 904-924-9624 www.coastalequipment system.com
CREEL TRACTOR CO. 3771 Palm Beach Blvd. Fort Myers, FL 33916 239-694-2185 Fax: 239-694-6059 www.creeltractor.com
RICHARDS TRACTOR CROSBY EQUIPMENT AND IMPLEMENTS COMPANY, INC. 1995 N.E. 8th St. Homestead, FL 33033 305-247-8711 www.ritrac.com
GRZQ $ 3 5 ¿QDQFLQJ IRU XS WR PRQWKV RQ SXUFKDVHV RI QHZ .XERWD 8 6HULHV (TXLSPHQW LV DYDLODEOH WR TXDOL¿HG SXUFKDVHUV IURP SDUUWWLFLSDWLQJ GHDOHUV¶ LQ VWRFN LQYHQWRU\ WKURXJK ([DPSOH $ PRQWK PRQWKO\ LQVWDOOPHQW UHSD\PHQW WHUP DW $ 3 5 UHTXLUHV SD\PHQWV RI SHU ¿QDQFHG $ 3 5 LQWHUHVW LV DYDLODEOH WR FXVWRPHUV LI QR GHDOHU GRFXPHQWDWLRQ SUHSDUDWLRQ IHH LV FKDUJHG 'HDOHU FKDUJH IRU GRFXPHQW SUHSDUDWLRQ IHH VKDOO EH LQ DFFRUGDQFH ZLWK VWDWH ODZV ,QFOXVLRQ RI LQHOLJLEOH HTXLSPHQW PD\ UHVXOW LQ D KLJKHU EOHQGHG $ 3 5 $ 3 5 DQG ORZ UDWH ¿QDQFLQJ PD\ QRW EH DYDLODEOH ZLWK FXVWRPHU LQVWDQW UHEDWH RIIIIHUV )LQDQFLQJ LV DYDLODEOH WKURXJK .XERWD &UHGLW &RUSRUDWLRQ 8 6 $ 'HO $PR %OYG 7RUUDQFH &$ VXEMHFW WR FUHGLW DSSURYDO 6RPH H[FHSWLRQV DSSO\ 2IIIIHU H[SLUHV 6HH XV IRU GHWDLOV RQ WKHVH DQG RWKHU ORZ UDWH RSWLRQV RU JR WR ZZ ZZ Z NXERWD FRP IRU PRUH LQIRUPDWLRQ 2SWLRQDO HTXLSPHQW PD\ EH VKRZQ
1826 South Peterson Ave. Douglas, GA 31535 915-384-4664
FLORIDA COAST EQUIPMENT 357 Pike Road W. Palm Beach, FL 33411 561-369-0414 694 Commerical Blvd. Naples, FL 34104 239-435-1667
631 Electric Rd. Swainsboro, GA 30401 15900 Westpark Lane 478-237-8372 Fort Pierce, FL 34945 772-461-1003 www.crosby www.floridacoasteq.com equipimentco.com
kubota.com
© Kubota Tractor Corporation, 2016
Page 76 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Topcon Systems Help to Ensure Efficient Compaction in Landfills ALABAMA
VIRGINIA
THOMPSON TRACTOR
COASTAL EQUIPMENT CORP.
www.thompsontractor.com Auburn, AL (334) 321-2030 Birmingham, AL (205) 326-0334 Dothan, AL (334) 673-3300 Huntsville, AL (256) 532-3001 Mobile, AL (251) 452-1180 Montgomery, AL (334) 262-1101 Oxford/Anniston. AL (256) 835-5737 Shelby County, AL (205) 649-9489 Tuscaloosa, AL (205) 247-3402
www.coastalequipment.net Virginia Beach (757) 424-1900 Yorktown (757) 898-1900
JAMES RIVER EQUIPMENT www.jamesriver equipment.com Ashland Ag (804) 358-6776 Fishersville (540) 337-3057 Winchester (540) 667-9777 NORTH CAROLINA
MISSISSIPPI
PUCKETT RENTS “We have been into offering drones for about two years now and to do that right, we have a staff of 12 that focus just on drones in their respective markets,” said Chuck Harris, Benchmark president. BENCHMARK from page 18
when you automate heavy equipment, you are, at a minimum, increasing your productivity 30 to 35 percent. When you can measure your production and fuel savings like that, it really stands out.” Topcon also is noted for implementing easy-to-learn and easy-to-use software and equipment. For instance, on earthmoving equipment, Topcon systems are integrated into the machines so that they will control the blade and the excavator bucket with greatly improved operator performance while decreasing his/her learning curve. “Because Topcon has strived to keep their systems simple, we are really able to capture a lot of market share,” he said. “With this system, you can take an operator that has never been around a 3D System and get that operator up to speed in a minimal amount of time. For a new user, it is by far the easiest system to learn.” Topcon Positioning Systems also are being used to efficiently compact trash in area landfills, Harris said. “In that application, we are trying to control airspace in order to get every piece of trash we can into every square inch of space in that landfill,” he said. “We are able to monitor in real time the compaction in a particular area so that both the operator can see it and the office staff can supervise it remotely. It generates reports at any given point in time with snapshots of the work’s progress in regards to airspace and compaction.” As it relates to all products, Harris said that Topcon has recently released a third-party aftermarket dozer system that includes dual IMUs without a mast that has been operating extremely well. It’s a system that is very smooth and easy to operate, with less components than on past machines.
In addition, Harris hinted that several other unique products for the asphalt and paving markets will soon be launched that he feels will change the way those industries utilize technology, as well. Providing an Eye in the Sky Among the other products Benchmark provides are tools for creating topographic maps and in-house surveying in order to help contractors using GPS systems to set up their controls and get their models in place. That helps them quickly start work, with minimal hurdles, when they get on site. And to prove that Benchmark is on the leading edge of technology, the company is helping its customers keep a helpful eye in the sky. “We have been into offering drones for about two years now and to do that right, we have a staff of 12 that focus just on drones in their respective markets,” he said. “Agricultural is a huge market for aerial platforms and construction is coming on very strong, too, simply because topographic surveys are often needed in a very fast and efficient manner. Plus, we sell them for use in the search-and-rescue and inspection markets.” The implementation of technology can be daunting for many long-time Benchmark customers, but Harris said the company is ready to help them in any way they can. “We are investing in bringing on several specialists to assist and perform services in all the industries we serve,” he said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
www.puckettrents.com Richland (601) 939-5151 Biloxi (228) 392-2211 Hattiesburg (601) 264-1111 Meridian (601) 703-0116 Madison (601) 859-5131 SOUTH CAROLINA
MAY HEAVY EQUIPMENT RENTAL & SALES www.mayequip.com Columbia (866) 629-3784 Charleston 866-629-3784
JAMES RIVER EQUIPMENT www.jamesriver equipment.com Asheville (828) 667-0176 Charlotte (704) 597-0211 Wilkesboro (336) 973-8201 Ahoskie (252) 332-5550 Fayetteville (910) 424-1200 Greenville (252) 758-4403 New Bern (252) 638-5838 Raleigh (919) 772-2121 Wilmington (910) 675-9211
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 77
FLORIDA
NORTRAX www.nortrax.com Fort Myers (239) 334-3627 Lutz (813) 995-0841 Miami (305) 592-5740 Orlando (407) 299-1212 Pompano Beach (954) 977-9541 Riverview (813) 621-4902 West Palm Beach (561) 848-6618
THOMPSON TRACTOR www.thompsontractor.com Pensacola, FL (850) 471-6710 GEORGIA
BORDER EQUIPMENT www.borderequipment.com Augusta (706) 737-9191 Atlanta (770) 322-6960 Savannah (912) 748-2828 LOUISIANA
H&E EQUIPMENT SERVICES www.he-equipment.com Alexandria (318) 443-7173 Baton Rouge (225) 356-6113 Kenner (504) 467-5906 Lafayette (337) 837-9600 Lake Charles (337) 528-2661 Shreveport (318) 746-5272
Now Available with Tier 4 Final
www.noram65.com
Page 78 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
FLINT Construction & Forestry Division Albany, GA 229/888-1212 Adairsville, GA 770/773-9857 Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Macon, GA 478/788-1586 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370
Troy, AL 334/566-4181 Dothan, AL 334/794-8691 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420
Bobcat of Jacksonville
James River Equipment
International Iron
Meco Miami, Inc.
Pittman Tractor Company, Inc.
www.bobcatjax.com 11657 Philips Highway Jacksonville, FL 32256 904/288-9181
Asheville, NC 828/667-0176 Charlotte, NC 704/597-0211 Greensboro, NC 336/668-2762 Mt. Gilead, NC 910/439-5653 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Wilmington, NC 910/675-9211 Fayetteville, NC 910/424-1200
www.intiron.com 2325 Clark Street Apopka, FL 32703 407/809-5856
www.mecomiami.com 5825 N.W. 74th Ave. Miami, FL 33166 305/592-4332
www.pittmantractor.com 9652 Milton Jones Rd. Daphne, AL 36526 251/621-3555
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 79
RISH EQUIPMENT COMPANY www.rish.com Bluefield, WV • 304/327-5124 Chesapeake, VA • 757/485-2100 Chester, VA • 804/748-6411 Coeburn, VA • 276/395-6901 Opal, VA • 540/439-0668 Salem, VA • 540/380-2090 Staunton, VA • 540/887-8291
POWER EQUIPMENT www.powerequipco.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283
LINDER INDUSTRIAL MACHINERY www.linderco.com find us on www.facebook.com/linderindustrialmachinery
Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570 North Carolina Asheville • 828/681-5172 Charlotte • 704/376-7554 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031 South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/552-0095
P
TRACTOR & EQUIPMENT COMPANY www.tractor-equipment.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Mobile • 251/457-8991 Montgomery • 334/288-6580 Shoals Area • 256/383-5666 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500
Page 80 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CCS EQUIPMENT SALES www.ccsequipment.com Raleigh/Durham, NC • 919-556-9110 Angier, NC • 919-935-0505
MAY HEAVY-EQUIP RENTAL & SALES www.mayequip.com Lexington, NC • 866-629-3784 Charleston, SC • 866-629-3784 Columbia, SC • 866-629-3784
Liebherr Organizes Unique Table Tennis Match in Pit of Mining Truck Liebherr organized a special type of table tennis match on April 12 at the bauma exhibition stand in Munich: The German and Austrian national teams battled it out in the pit of the Liebherr mining truck. The German and Austrian men’s national table tennis teams competed against each other again for the first time since the European Championship final in 2015. The venue for the match was not only the world’s largest trade fair for the construction machinery industry — in the pit of the enormous, 182 ton (165 t) Liebherr T 264 mining truck, the top players Timo Boll, Bastian Steger and Patrick Franziska from the German national team engaged in rallies with Werner Schlager, one-time world The family-owned company also supports the Austrian team. champion in 2003, as well as the acting Team Europe champions Chen Weixing and Stefan Fegerl from Austria. The “Match in the Mining Truck” is moderated by ZDF sports commentator Norbert König. The coach of the German national team, and former double world champion Jörg Roßkopf, as well as World Federation President Thomas Weikert and the National Federation Presidents Michael Geiger (DTTB) and Hans Friedinger (ÖTTV), also were involved. The Liebherr Group has been promoting talent for decades — not only on the job, but also in table tennis. For more than 20 years the group has been actively involved in table tennis and is a strong partner of the German Bundesliga team TTF Liebherr Ochsenhausen, as well as the German and Austrian national teams and the International Table Tennis Federation (ITTF). Timo Boll, Bastian Steger and Patrick Franziska from (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
the German national team are competing against Austria at the “Match in the Pit.”
HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 8071 Lee Hwy. • Troutville, VA 24175 540-992-4150
GROVE RIVER www.groveriver.com 902 Longwood Drive Richmond Hill, GA 31324 912-756-7854
PITTMAN TRACTOR COMPANY, INC. www.pittmantractor.com 9652 Milton Jones Rd. Daphne, AL 36526 251-621-3555
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 81
COWIN EQUIPMENT COMPANY, INC. Birmingham, AL • 800-239-2694 Montgomery, AL • 800-239-6642 Madison, AL • 256-350-0006 Huntsville, AL • 800-239-7368 Oxford, AL • 800-917-7931 Pensacola, FL • 800-239-4736 Atlanta, GA • 800-849-3540
CLM EQUIPMENT CO., INC. www.clmequipment.com Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Baton Rouge, LA • 255-677-7838 Biloxi, MS • 228-396-8740 Houston, TX • 281-598-2500
GS EQUIPMENT INC. Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892
ONE FOCUS. COMPLETE SOLUTIONS. GREAT SOUTHERN CONSTRUCTION EQUIPMENT
> >
Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400
> > >
LINK-BELT MID ATLANTIC Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248
www.heavymachinesinc.com Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453
> > >
Page 82 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SCOOP
SUPERIOR
ALL-NEW Z35 GEN:2 COMPACT EXCAVATOR
THE
INDUSTRY PROVEN –
SC
IN
DEMO ONE TODAY
ALL-NEW COMPAC75
758( =(52 7$,/ 6:,1* ±
32:(5 $ 7$&+ 48,&. &283/(5 ±
32
www.donallisonequipment.com 233 Melville Road, Arley, AL 35541 $'9$1&(' +<'5$8/,&6 ± 800-669-6450 205-387-1600 Fax: 205-387-1668
$' IN
DON ALLISON EQUIPMENT, INC.
ECO MODE
75
INTERACTIVE
AUTO DECELERATION
RICHMOND MACHINERY & EQUIPMENT COMPANY
32
www.richmondmachinery.com 1701 Roseneath Road, Richmond, VA 23230 804-359-4048 Fax: 804-359-4179
$'
POWER-A-TACH®
GET VERSATILE
4C_EXC (08-2012)
BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.
Construction Association of Michigan (CAM) The mission of Construction Association of Michigan is to provide service, information and assistance to the construction industry. The Association exists to foster growth in the construction industry and encourage networking between members and their publics. CAM will act as a catalyst to promote and enhance profitability, efficiency and integrity within the industry for the benefit of association members. For further information: Website: http://www.cam-online.com; Email: marketing@cam-online.com; Address: 43636 Woodward , Bloomfield Hills, Michigan 48302; Phone: 248/972-1000. Michigan Construction News Coming Events: May 19 – 21, Thursday to Friday – American Institute of Architects, 2016 AIA Convention, Pennsylvania Convention Center, Philadelphia, Pennsylvania. Contact: AIA, 800/242-3837. May 24 – 26, Tuesday to Thursday – American Association of State Highway & Transportation Officials, 2016 AASHTO Spring Meeting, Des Moines Marriott Downtown, Des Moines, Iowa. Contact: Liz Forman, 850/224-7775. June 13-14, Monday-Tuesday – Associated General Contractors of America, 2016 Financial Issues Committee Meeting, Loews Madison Hotel, Washington, D.C. Contact: AGC of America, 703/837-5352; www.agc.org. June 14, Tuesday – Construction Association of Michigan, Golf Outing, 4C_Z35-GEN:2EXC (12-2012) Bay Pointe Golf Club, Commerce Township, West Bloomfield Township. Contact: CAM, 248/972-1000. June 26-29, Sunday-Wednesday – American Society Of Civil Engineers, International Conference On Transportation & Development, Omni Houston Galleria Hotel, Houston, Texas. Contact: ACEC, 800/5482723; www.asce.org. July 13, Wednesday – Michigan Infrastructure & Transportation Association, 2016 Metro Detroit Golf Outing, Twin Lakes Golf Club, Oakland Township. Contact: MITA, 517/347-8335. July 19, Tuesday – Construction Association of Michigan, Golf Outing, Links of Novi. Contact: CAM, 248/972-1000. July 27-31, Wednesday-Sunday – Michigan Infrastructure & Transportation Association, 2016 Summer Conference, Crystal Mountain Resort, Thompsonville. Contact: MITA, 517/347-8335. August 16, Tuesday – Construction Association of Michigan, Golf Outing, Fieldstone Golf Club, Auburn Hills. Contact: CAM, 248/972-1000. August 20, Saturday – Woodward Dream Cruise, “Cruise Into CAM,” CAM HQ, West Bloomfield. Contact: CAM, 248/972-1000. AGC – The Associated General Contractors of America (AGC) is the leading association for the construction industry. AGC represents more than 26,000 firms, including over 6,500 of America’s leading general contractors, and over 9,000 specialty-contracting firms. More than 10,500 service providers and suppliers are also associated with AGC, all through a nationwide network of chapters. For more information about AGC, please contact AGC directly: 2300 Wilson Boulevard, Suite 300
Arlington, VA 22201 For general inquiries: Phone: 703/548-3118. Fax: 703/548-3119. Email: info@agc.org Events Calendar: 2016 ACI-NA/ACC/AGC Airport Construction Strategy Summit Wednesday, June 8, 2016 to Thursday, June 9, 2016 Atlanta, Georgia Financial Issues Committee Summer Meeting Monday, June 13, 2016 – 10:00 AM to Tuesday, June 14, 2016 – 5:00 PM Washington, District of Columbia AGC Safety & Health Conference Wednesday, July 27, 2016 to Friday, July 29, 2016 District of Columbia THE ASSOCIATED GENERAL CONTRACTORS of NEW YORK STATE LLC JUNE 14, 2016 – Anthony S. Santaro AGC Scholarship Classic Annual Anthony S. Santaro AGC Scholarship Classic Tuesday, June 14, 2016 Turning Stone Casino & Resort, Verona, NY Please mark your calendars. We had a record 350 golfers at the 2015 event and maxed out the two scramble courses. This is the only fundraising event for our scholarship program. We have awarded over $1 million in scholarships to well deserving students. Any questions, please contact Brendan Manning at the AGC at bmanning@agenys.org or at 518/456-1134. McCann Industries WAUCONDA Open House Join us! Open House at Our Wauconda Branch Store Date: Friday, June 10, 2016 Time: 10:00 AM to 2:00 PM Location: McCann Industries Wauconda Branch Store 1360 N. Rand Road Wauconda, Illinois 60084 . Speak With Experts From Takeuchi, Husqvarna, DeWalt and More! . DeWalt, Stihl, Husqvarna and Takeuchi Will Be On Hand For Demonstrations and To Answer Questions… . Hot Lunch and Refreshments Provided…Burgers, Brats, Sides . Machinery Demos Available . There Will Be Some Giveaways For Those Who Attend . Plus Day Only Deals On DeWalt and Husqvarna For more information on this event, go to www.mccannonline.com or contact the Wauconda Branch Store location at 1360 N. Rand Road, Wauconda, IL ; Phone: 847/526-9444. OAIMA (Ohio Aggregates & Industrial Minerals Association) The Ohio Aggregates & Industrial Minerals Association is the trade association in Ohio that represents all of the state’s mining operations except coal. PROJECT STONE – June 20-24, 2016 & June 27 – July 1, 2016 This workshop enables OAIMA producing members to develop partnerships with local schools and give teachers the opportunity to incorporate real-life earth science into inquiry based science lessons. PROJECT STONE is an annual program open to all teachers educating in Ohio’s classrooms. The spacing is limited. For more information about PROJECT STONE, please visit OAIMA.org. You may also call OAIMA at 1.800.OH.ROCKS or 614/428-7954. Fax: 614/428-7919. TDWI – Modern Data Modeling Seminar
4C_EXC (08-2012) San Francisco, CA May 23 – 26, 2016 Monday, May 23 Business Information and Modern BI: Balancing OLAP, Analytics, and Performance Management
For more information, visit the website: www.commercial-trucking-telematics-insurance.com American Business Conference Phone: 800/721-3915
2016 APWA NORTH AMERICAN SNOW CONFERENCE The Premier Event in Snow & Ice Management May 22 – 25, 2016 Connecticut Convention Center Hartford, Connecticut This conference is hosted by the APWA New England Chapter. Website: www.apwa.net/snow The 2016 Snow Conference in Hartford will bring together more than 2,000 snow fighters from every corner of the winter maintenance community. Public, private, rural, metropolitan, domestic, international – they are all sure to be there at the Show for Snow! The 2016 Conference features an exhibit floor packed with the newest equipment and products, quality education programs and technical tours, and opportunities to exchange ideas with manufacturers, distributors, consultants and other public works professionals. It is four days of winter training and netSTAFDA – Specialty Tools & Fasteners Distributors Association working you cannot afford to miss out on! Welcome to STAFDA! STAFDA is an international educational association comprised of distribu- SIMA 19th Annual Snow & Ice Symposium – Snow & Ice Management tors, manufacturers, rep agents, and affiliates (trade press) serving the Association construction/industrial market. We have 2,500 members from across the Dates: June 21, 2016 to June 24, 2016 globe and have been serving the Construction & Industrial Channel since Place: Rhode Island Convention Center 4C_EXC (08-2012) 1976. 1 Sabin Stree UPCOMING EVENTS: Providence, RI 02903 STAFDA’s Congressional Fly-In The conference will cover areas like it is the industry’s largest conference June 8-9, 2016 and trade show and a favorite of snow and ice professionals. Uniquely Washington, D.C. focused on snow and ice, this event brings innovative manufacturers and STAFDA’s 40th Annual Convention & Trade Show suppliers together with contractors for two (2) days of trade show and four Atlanta, GA (4) days of education, networking and fun. There are plenty of opportuniNovember 6 – 8, 2016 ties to get in front of them, including exhibit space, educational sessions to Georgia World Congress Center banquet and reception events, and more. Join SIMA as we help educate Registration materials will be mailed to members the third week of June. each other on the best principles of business management, snow and ice You must be a member to attend! STAFDA has a series of training manu- operations, leadership and more! als, along with benchmarking surveys, and over 65 different programs to About SIMA: SIMA provides resources, leadership and support for snow serve your needs! We encourage you to explore our website and learn removal and management professionals across North America. It is a more! non-profit trade association with a focus on training related to snow plowSTAFDA ing, ice management, and business management. For more information 500 Elm Grove Road – Suite 210 – P. O. Box 44 – Elm Grove, on this event, website is http://www.sima.org. Venue Type: Indoor Wisconsin 53122 Convention Center; Venue Phone: 401/458-6000. Phone: 800/352-2981 or 262/784-4774 Fax: 262/784-5059 Info@STAFDA.org ASSOCIATED TRAINING SERVICES NEW FACILITIES GRAND OPENING Maintenance Design Group DATE: FRIDAY, JULY 15, 2016 http://maintenancedesigngroup.com/perspectives/events/ TIME: 9 AM to 3 PM June 15-19, 2016 – APTA International Rail Rodeo FREE LUNCH 11 AM The 2016 APTA International Rail Rodeo is scheduled for June 15-19, Why Attend This Event? 2016, at the Sheraton Grand Phoenix, 340 N. 3rd Street, Phoenix, AZ. See New Facilities and Training Grounds Maintenance Design Group JCB, Case Construction, Terex Cranes, Manitou, Mazella Sponsored http://maintenancedesigngroup.com/perspectives/events/ Classrooms June 19 – 22, 2016 – APTA Rail Conference The 2016 APTA Rail Conference is scheduled for June 19-22, 2016, at Meet ATS Training and Management Staff the Sheraton Grand Phoenix, 340 N. 3rd Street, Phoenix, AZ. Talk With Our Business Development Department Establish New Partnerships Maintenance Design Group Ask About Our Specialized Training Options http://maintenancedesigngroup.com/perspectives/events/ July 24-26, 2016 – APTA Sustainability & Public Transportation Meet with Equipment Manufacturers and Dealers Workshop Equipment Dealers and Manufacturers Will Be On Hand The 2016 APTA Sustainability & Public Transportation Workshop is scheduled for July 24-26, 2016, at the Westin Austin Downtown, 310 E. Recruits ATS Graduates For Your Company ATS Students and Graduates Will Be Available 5th Street, Austin, TX. ASSOCIATED TRAINING SERVICES – OPEN HOUSE American Business Conference 7132 Elder Lane, Corner of HWY 151 & HWY VV Commercial Trucking Telematics Insurance Congress 2016 SUN PRAIRIE, WI 53590 Spotlight On E-logging and Data Management Dan Swiggum, 605/354-0721 Dates: May 25 & May 26, 2016 www.operator-school.com Place: Chicago, IL Tuesday, May 24 TDWI Dimensional Data Modeling Primer: From Requirements to Business Analysis Wednesday, May 25 Advanced Dimensional Modeling: Techniques for Practitioners Thursday, May 26 Data Modeling in the Age of Big Data Seminar Location: Embassy Suites, San Francisco Airport – Waterfront, 150 Anza Boulevard, Burlingame, CA 94010 For questions or more information on this seminar, contact info@tdwi.org.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 83
Authorized Authorized Doosan Doos an De Dealers aler s
AL ALABAMA ABAMA Heavy Heav y M Machinery achiner y & T Tractor ractor Co. Co. Albertville Alber t ville 2 256-878-1631 56-878-1631 ∙ 866-867-4374 866-867-4374 w www.hmtc.us w w.hmtc.us
A ARKANSAS RK ANSAS A Alma l ma T Tractor ractor & Equipment Equipment Alma Alma 479-632-6300 4 79-632-6300 w www.almatractor.com w w.almatr ac tor.com
FLORIDA FLORIDA B Bobcat obcat o off D Daytona aytona B Beach each Daytona D ay tona B Beach each 3 386-274-1002 86-274-1002
Bo Bobcat bcat o off Ja Jacksonville, cksonville, LLC LLC JJacksonville acksonville 904 904-288-9181 -288-9181 w www.bobcatjax.com w w.bobcatja x .com
Bobcat Bobcat of of Tallahassee Tallahassee M Midway idway 850-222-7444 850 -222-7444
G GEORGIA EORGIA
RUN STRONG.
C Cowin owin Equipment Equipment C Company, ompany, IInc. nc. Mableton Mableton 404-696-7210 404-696-7210 www.cowin.com w w w.cowin.com
LLOUISIANA OUISIANA D Duhon uhon M Machinery achiner y C Co., o., IInc. nc. Scott Scott 3 337-408-4050 37-408-4050
S St. t. Rose Rose 504-466-5495 504-466-5495 ∙ 888-427-6408 888-427-6408 w www.duhonmachinery.com w w.duhonmachiner y.com
MI MISSISSIPPI SSISSIPPI H H&E &E Equipment Equipment Services Ser vices Jackson Jackson 6 601-373-0444 01-373- 0444 H HE-equipment.com E- equipment.com
AROLINA NORTH NORTH C CAROLINA H H&E &E Equipment Equipment Services Ser vices A Arden rden 828-684-1692 828-684-1692
Cha Charlotte rlotte 704-504-2870 704-504-2870
R Raleigh aleigh 9 919-781-9454 19-781-9454
Winston-Salem W inston-Salem 336-767-6900 336-767-6900 H HE-equipment.com E- equipment.com
SOUTH SOUTH CAROLINA CAROLINA H H&E &E Equipment Equipment Services Ser vices Columbia Columbia 803-776-8465 803-776-8465
Greenville Greenville 864-272-2600 864-272-2600 H HE-equipment.com E- equipment.com
T TENNESSEE ENNESSEE Bobcat Bobcat of of Nashville Nashville La La Vergne Vergne 6 615-941-4000 15-941-4000
Want to run strong equipment? Run Doosan.
w www.bobcatofnashville.com w w.bobcatof nashville.com
H H&E &E Equipment Equipment Services Ser vices M Memphis emphis 9 901-375-4902 01-375-4902 H HE-equipment.com E- equipment.com
V VIRGINIA IRGINIA Request FREE product information:
DoosanEquipment.com/Excavator21
H H&E &E Equipment Equipment Services Ser vices A Ashland shland 804-798-9740 804-798-9740
N Norfolk or fo olk 7 757-295-4944 57-295-4944
R Roanoke oanoke 5 540-362-3600 40 -362-3600 Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Infracore Construction Equipment America. All rights reserved. | 49040-2
Warrenton Warrenton 5 540-349-2878 40 -349-2878 H HE-equipment.com E- equipment.com
Page 84 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $115 • Color $165
CLASSIFIEDS Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034
“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of HighQuality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call
Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 11-12 TM
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. 10-11 DH Call McLaren 888-492-4230
eXCAVAtors
skid steer Loaders
Wheel Loaders
Hydraulic excavators
JCB 330 s/n 2196115, Cab/AC, Wheeled 74HP Tier 4, Servo Controls, High Flow Hydraulics, Quick Coupler, 78'' Bkt, 10'5 Hinge Pin Hgt, Roc 3,000 lbs, Low hrs ........................CALL.
'13 Cat 980K, Command Steering, EROPS, Ride Control, AC, GP Bucket, Fast Fill Fuel System, 3,752 hrs...... ................................$345,000.
2008 Case CX50B, Mech Thumb, Above average condition, 2,538 hours........$31,900. tyler equipment Co. 843-248-5600
JCB 280 s/n 2197671, Cab AC, 74 HP Tier 4, Aux Hydraulics, 2 speed trans, Block Heater, Suspension seat, 72'' Bkt, 10'5 Hinge Pin Hgt, Roc 2,800 lbs, Low hrs ........................CALL.
LAnDsCAPe eQUIP.
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. 10-11 DH Call McLaren 888-492-4230
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air SemiPneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. 10-11 DH Call McLaren 888-492-4230
Landscape - Misc. Dynapac CA250. Soil Compaction. Pad Foot Bolt-on Shell Kit 84"", New ....$10,500. Asphalt Care equipment Inc. 215-639-9800
LoADers
JCB 320t s/n 2192378, Tracked Cab/ AC, 17'7 Trks, High Flow Hydraulics, 2 speed trans, Quick Hitch Coupler, Smooth ride, 78'' Bkt, Mint condition..............................CALL. Farm rite equipment 908-625-0697
Backhoe Loaders
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 614-395-4064 11-12 EB
2009 Liugong CLG922 LC, A/C, Heat, UC 60%, Fixed Thumb, Plumbed for Hammer, Installed Reman Hydraulic Pump on 09/24/13, Stock# 568, 3294 Hrs, 155 Horse Power.............................................$47,000 Call Jon 812-282-2800 10-11 EB
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $115 per ad, $50 additional for color.
Cleveland Brothers 1-855-545-0267 ext.1 Doosan DL500HL. S/N 10028, 7 Cy Bucket, Runs well, 2,047 hours........................$253,300. gibson Machinery 440-439-4000
trUCKs Articulating trucks
2006 Cat 430e, EROPS, 4x4, AC, Tier ll Engine, Pilot Control, Standard Loader, Six Function Manual Coupler, Bucket, 7,036 hours..........................$48,000.
2014 new Holland L220, Canopy, 2-Speed Travel, Manual Quick Coupler, Foot Control, 12x16.5 Galaxy Tires 75% REM, 190 hrs ....$30,000.
Moxy Mt31 Articulated Dump Truck, S/N 730075, Runs well, 2,292 hours..............$174,600.
Cleveland Brothers 1-855-545-0267 ext. 1
Cleveland Brothers 1-855-545-0267 ext. 1
gibson Machinery 440-439-4000
DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL? Construction Equipment Guide is THE Place to List It!
• Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 24,273 Construction Equipment Buyers in the Southeast States.
For more information, call Construction Equipment Guide today at
800/523-2200
see your bargain aD in color. only $50 extra FOR 2 INSERTIONS
ONLY
$40
2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less - $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.
Call 800-523-2200 or go online to place your ad:
www.constructionequipmentguide.com/pages/customer/classifieds.asp and place your ad through our website and we will contact you!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 85
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items
If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: KOMATSU 380 JG-1, 580 OR 550 TRACK JAW CRUSHER LATER MODEL, LOW HOUR, WORK READY USA LOCATION CONTACT: RICHARD PH: 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: REQUIRED MACHINES FOR PURCHASE COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: 6" TO 12" L39 KUBOTA BACKHOE BUCKET BUCKET & A HYDRAULIC THUMB FOR L39 BACKHOE CONTACT: RALPH STEWART PH: 662-327-3552 EMAIL: RALPHCSTEWART@ BELLSOUTH.NET FAX: 662-327-3552 –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT WANTED TO BUY WE BUY HEAVY EQUIPMENT AND TRUCKS! LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: FORKLIFTS WE ARE LOOKING TO PURCHASE YOUR WORKING AND NON WORKING 80'S 90'S AND LATE MODELS. ALL MAKES AND MODELS!! CASH ON THE SPOT!!!! CONTACT: JOHN PH: 832-900-5824 EMAIL: JNICHOLAS.NICHOLAS MACHINE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BACK HOE REAR BUCKET REAR BUCKET FOR NEW HOLLAND 555D 1996 MODEL CONTACT: JOHN EMAIL: JRELKHUNT@AOL.COM –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: NEED EXCAVATOR EX 5600 HITACHI WANT TO BUY NOW EXCAVATOR HITACHI EX 5600 «35YARD« BETWEEN 5000 AND 12000 HOURS REAL HOURS ON THE METERS AND FRAME NOT ADVERTISED IN THE WORLD USER ONLY OR REPOSES BANK CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA ––––––––––––––––––––––––––––––––
WANTED: LOADER FOR 255 MF I LIVE IN CENTRAL KY CONTACT: HARRY PH: 270-402-5781 EMAIL: RICEPRESTON75@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: SMALL DOZER SMALL USED DOZER WITH 3PT HITCH AND 540RPM PTO CONTACT: TONY PH: 217-773-2670 EMAIL: TONYMATHEWSON@ YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: SKID STEERS AND MINI EXCAVATORS. CONTACT: JOE DIRT MACHINERY PHONE: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINES.COM FAX: 570-364-5200 –––––––––––––––––––––––––––––––– WANTED: WANT BULLDOZER WANT TO BUY BULLDOZER D9N ENC CAB WITH RIPPER D9R, ENC CAB WITH RIPPER D10R ENC CAB WITH RIPPER KOMASTU 155AX-6 SS RIPPER 2012 AND UP NO PAST 4000 HOURS ALL UNIT FROM USER NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WE BUY OILFIELD EQUIPMENT WORKING OR NON WORKING WE PAY TOP DOLLAR. CONTACT: JAMIE MILLER PHONE: 713-256-6006) EMAIL: JMILLER.SOUTHERNMANCHINE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: DEERE 644K WHEEL LOADER 4.0 YD. G.P. BUCKET CONTACT: FRANK @ GROFF TRACTOR PHONE: 1-800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADERS I AM LOOKING TO BUY RUNNING OR NON RUNNING CAT WHEEL LOADERS , MOTOR GRADER AND DOZER. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: DORNIER LOOMS 30004000MM PREFER MODELS PTV/PTS FOR TECHNICAL TEXTILES. 3 LOOMS NEEDED. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON PHONE: 864-574-0404 EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 ––––––––––––––––––––––––––––––––
NEEDED BULLDOZER D10N AND D11N ENC CAB WITH RIPPER GOOD UNDERCARRIAGE, USA WELCOME EUROPE MUST BE GOOD PRICE. I NEED 5 UNIT. CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR 1-514-386-8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– LOOKING FOR 16" RUBBER PADS OR 16" CLIP ON PADS FOR A CAT 305 MIDI EXCAVATOR - HWJ03223. CONTACT: MARCEL PHONE: 519-686-1123 EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: WIRTGEN MILLING MACHINE WE NEED TO BUY WIRTGEN MILLING MACHINE W2100 AND W2200 2000 AND UP WITH MOBA CONTROLLER, IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM SUNESARA PHONE: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: KOMATSU D37-P-2 TRACK CHAINS AND SPROCKETS IN GOOD COND CONTACT: TOM EMAIL: TSDREDGING@MSN.COM –––––––––––––––––––––––––––––––– WANTED: TOOLCAT (USED) MADE BY BOBCAT CONTACT: MARC JONES PH: 6086954397 EMAIL: MJOSYENE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D8T WITH 45000 HOURS WANT TO BUY USA FROM USER 2 BULLDOZER D8T ENC CAB SEMI U WITH RIPPER WITH 45000 HOURS AND UP WITH UNDERCARRIAGE POOR MUST BE ALL PIECES MUST BE RUNNING I NEED 2 FAST CONTACT: JEAN MAURICE BOUTIN PH: 1 450 346 8975 OR 1 514 386 8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CAT DRIVE MOTOR-PART # 1390848 CAT DRIVE MOTOR (ALSO CALLED A TRAVEL MOTOR), FOR A CAT EL300B EXCAVATOR. THE CAT PART # IS 1390848. CONTACT: NICK PH: (304) 232-1333 EMAIL: WVCOINC@AOL.COM FAX: (304) 233-1333 –––––––––––––––––––––––––––––––– WANTED: DEERE 644K DEERE 644K 4.25 CUBIC YARD G.P. BUCKET CONTACT: FRANK PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 ––––––––––––––––––––––––––––––––
WANTED: WE BUY EQUIPMENT MANUALS | WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES). WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCES PHONE: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING TO BUY NEW OR USED EQUIPMENT MANUALS, SERVICE PARTS OR OPERATOR MANUALS WANTED: CAR HAULER TO HAUL 8' CONTACT: JOHN WHITNEY WIDE X 20' SHIPPING CONTAINERS PHONE: 530-864-0771 LOOKING FOR A CAR HAULER THAT HAS A FLATBED THAT EXTENDS DOWN EMAIL: WHITNEYJ65@YAHOO.COM –––––––––––––––––––––––––––––––– AND OUT. I USED TO USE ONE OF THESE TO HAUL 8' X 20' MOBILE STOR- WANTED: BULLDOZER 12 MONTHS USER 2013 AND UP UNDER 3000 AGE / SHIPPING CONTAINERS. THE HOURS, ENC CAB LOW LOW HOURS THING IS... THE BED HAS TO BE 102" WIDE TO ACCOMODATE THE 96" WIDE USER ONLY , AFTER ONLY USA CONTACT: JEAN MAURICE BOUTIN SHIPPING CONTAINER! PHONE: 1-450-346-8975 OR CONTACT: SHANE TERRY 1-514-386-8975 PH: 951-219-4210 EMAIL: EMAIL: SHANETERRY27@YAHOO.COM JEANMAURICEBOUTIN@VIDEOTRON.CA FAX: 951-468-4522 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: USED JD 35D ATTACHMENTS WANTED: CEDAR RAPIDS REMIX USED 12", 18", 30"-36", AND A 42-48" ASPHALT PAVER GRADING BUCKET. CONTACT: JD BENTLEY CONTACT: BEN PH: 660-651-2432 EMAIL: HARRISSVCS@HOTMAIL.COM EMAIL: –––––––––––––––––––––––––––––––– SUSANBENTLEY1962@YAHOO.COM WANTED: HITACHI WHEEL EXCAVA–––––––––––––––––––––––––––––––– TORS & JOHN DEERE EXCAVATORS WANTED: CAT 938G QUICK ATTACH WHEELED HITACHI EXCAVATOR EX2001 & HITACHI EX400-1. JOHN DEERE BUCKET WHEEL EXCAVATOR 595D CAT 928G QUICK ATTACH BUCKET CONTACT: RIZ CONTACT: DEBBIE PHONE: 832-528-0786 PH: 4064421399 EMAIL: RIZ@MEGAEQUIPMENTS.COM EMAIL: SLICKROCK08@GMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: CLAMSHELL BUCKETS, WANTED: REQUIRED MACHINES FOR DRAG BUCKETS, GRAPPLES, PILE PURCHASE HAMMERS AND HOISTS/WINCHES. DAVIS & FURBER WOOLEN CARD. MUST BE 2500MM (100 INCHES). IF YOU SEND PICTURES AND PRICES. CONTACT: GREG HAVE ANY, PLEASE SEND FULL PHONE 724-228-5560 DETAILS, PICTURES AND PRICE. EMAIL: NEEQUIPDIST@AOL.COM CONTACT: VICTOR LEBRON –––––––––––––––––––––––––––––––– PH: 864-574-0404 WANTED: PC400LC-7, 8 EMAIL: APESALES@AMERICANPLANLOOKING FOR 7500HR MACHINE TANDEQUIPMENT.COM CONTACT: MATT JOHNSON FAX: 864-576-7204 PHONE: 716-218-4946 –––––––––––––––––––––––––––––––– EMAIL: MJOHNSON@HRPARTS.COM WANTED: WALKING DRAGLINE –––––––––––––––––––––––––––––––– WALKING DRAGLINES OF 50M3 BKT WANTED: I WANT A FAIRLY USED CAT CAPACITY AND BIGGER. D8 74,000 POUNDS WEIGHT CATEGORY CAT,MARION,BE ETC CONTACT: KERIAN NNABUIFE CONTACT: ALEEM BAKSH PHONE: 720-327-1847 PH: +64 211263938 EMAIL: EMAIL: GCTLTD@XTRA.CO.NZ KERIAN.NNABUIFE@YAHOO.COM –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––
WANTED: NEW OR REBUILT HYDRAULIC PUMP FOR A JOHN DEERE 270CLC. CONTACT: LLOYD COOPER PHONE: 1-780-723-5051 EMAIL: LLOYD@CONTOUR CONSTRUCTION.COM FAX: 1-780-725-4430 –––––––––––––––––––––––––––––––– WANTED: ACS SERIES 1000 GP LOADER BUCKET. LOOKING FOR A 2.5 YD GENERAL PURPOSE LOADER BUCKET WITH ACS SERIES 1000 SET UP CONTACT: HEIDI EMAIL: JAWSALES1300@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT 988H HIGH LIFT | <10,000 HRS. PLEASE SEND PHOTOS, BEST WHOLESALE PRICE AND LOCATION. CONTACT: DAVID MOORE EMAIL: MOORE9023@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: ROLLED OVER CHIPPERS / ANY EQUIPMENT | LOOKING FOR WRECKED, ROLLED OVER, OR DAMAGED EQUIPMENT. CHIPPERS, STUMP GRINDERS, SKID STEERS, ETC CONTACT: TIM PHONE: 724-640-4396 EMAIL: LEWEQUIP@GMAIL.COM FAX: 724-887-4899 –––––––––––––––––––––––––––––––– WANTED: WANT BULLDOZER CASE 1650KLGP | WANT TO BUY FROM USA USER ONLY BULLDOZER CASE 1650KLGP RUN OR BURN 2005 TO 2009 CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: HFO GENERATOR/WARTSILA OR MAN GENERATOR | HFO = 1.5 MW CAPACITY, 50 TO 60 HZ, VOLTAGE 400/450, PHASE 3. WARTSILA = 2007 OR ABOVE, NET POWER 4MW (PREFERRED 2 GENSET), 50 HZ WITH COMPLETE AUXILIARIES, LESS THAN 50,000 RUNNING HOURS. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PHONE: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 350C | HOOD/ENGINE COVER CONTACT: BRUCE EMAIL: DETAIL1985@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: USED 50 TON HYDRAULIC TRUCK CRANE | SEARCHING FOR 1990 OR ABOVE USED 50 TON HYDRAULIC TRUCK CRANE. UNADVERTISED -SEEN THEM. I WILL TAKE OVERSEAS SO NEED NEAR PORT IF POSSIBLE. THANKS. PICTURES PLEASE. CONTACT: BOB PHONE: 919-896-4782 EMAIL: NCNETWORKBOB@GMAIL.COM ––––––––––––––––––––––––––––––––
Page 86 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944
• Reno, NV Thurs., June 23, 2016
• Long Island, NY Sat., May 28, 2016 For: Late Model Rental Fleet Equipment
• Reno, NV Thurs., June 23, 2016
• Mobile, AL Tues., May 31, 2016 For: Late Model Trucks, Tractors, Construction Equipment • Queretaro, Mexico Fri., June 3, 2016 For: Late Model Earth Moving Equipment & more • Scranton, PA Sat., June 4, 2016 For: Late Model Trucks, Heavy & Lite Construction Equipment • Hagerstown, MD Thurs., June 9, 2016 (PM) For: Late Model Rental Fleet Equipment
• Bottineau, ND Thurs., June 23, 2016
• Kenmare, ND Fri., June 24, 2016 • Raleigh-Durham, NC Tues., June 28, 2016 • Phoenix, AZ Wed., June 29, 2016 • St. Louis, MO Wed., June 29, 2016 • Kansas City, MO Wed., July 13, 2016 • Manchester, NH Tues., July 26, 2016 AARON POSNIK AUCTIONEERS & APPRAISERS www.posnik.com 413-733-5238
• Kenosha, WI Sat., June 11, 2016 For: Liquidation Late Model Construction Equipment
• Ludlow, MA Wed., May 25, 2016 For: Concrete Contractor
• Buffalo, NY Wed., June 15, 2016 For: 90% Liquidation Construction Equipment & more
BIDITUP AUCTIONS WORLDWIDE www.biditup.com 818-508-7034
• San Angelo, TX Thurs., June 16, 2016 For: Large Rental Equipment Auction
• ONLINE ONLY Thurs., June 9, 2016 For: Construction Equipment & more
• Houston, TX Tues., June 21, 2016 For: Late Model Rental Fleet • Atlantic City, NJ Sat., June 25, 2016 For: Large Construction Equipment & more • Syracuse, NY Sat., July 16, 2016 For: Very Large Late Model Rental Return Auction
BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY May 25, 2016 • ONLINE ONLY June 1, 2016 • ONLINE ONLY June 8, 2016
Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768
HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898
AL: 334-693-2540
• Souderton, PA Wed., May 25, 2016 For: Complete Liquidation C&T Associates, Inc.
• Philadelphia, MS May 25 - 26, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS July 20 - 21, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS September 14 - 15, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS November 16 - 17, 2016 For: Huge 2-Day Public Auction EURO AUCTIONS USA www.euroauctions.com 770-683-3883 • Atlanta, GA Tues., June 21, 2016 For: Construction Equipment & more
• ONLINE ONLY June 22, 2016
• Marietta, PA Fri., June 17, 2016 For: Truck, Trailer & Equipment
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631
COCHRAN AUCTIONS www.cochranauctions.com 301-739-0538
• Marietta, PA Fri., August 26, 2016 For: Truck, Trailer & Equipment
• Orlando, FL Wed., May 25, 2016
• Hagerstown, MD June 30 – July 1, 2016 For: Major 2 Day Summer Contractor’s Auction
• Marietta, PA Fri., October 14, 2016 For: Truck, Trailer & Equipment
• Denver, CO Wed., June 8, 2016 • Nashville, TN Thurs., June 9, 2016 • Las Vegas, NV Fri., June 10, 2016 • Wasilla, AK Sat., June 11, 2016 • North East, MD Tues., June 14, 2016 • Sacramento, CA Tues., June 14, 2016 • Columbus, OH Thurs., June 16, 2016 • Minneapolis, MN Fri., June 17, 2016 • Atlanta, GA Tues., June 21, 2016 • Salt Lake City, UT Tues., June 21, 2016 • Houston, TX June 22 - 23, 2016
• ONLINE ONLY May 23 – June 6, 2016 For: Repossessed Commercial Wood Shaving Mill COMMONWEALTH OF PA www.auctionsbygov.com 866-469-7383
HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493
• Marietta, PA Fri., December 9, 2016 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY May 25, 2016 • ONLINE ONLY June 15, 2016
• ONLINE ONLY Tues., June 7, 2016 For: Spring Heavy Equipment Auction
• ONLINE ONLY June 29 2016
DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087
• ONLINE ONLY July 27, 2016
• Prospect, CT Sat., June 18, 2016 For: Construction Equipment • Prospect, CT Sat., September 17, 2016 For: Construction Equipment • Prospect, CT Sat., December 3, 2016 For: Construction Equipment
• Foley, MN Fri., December 2, 2016 For: Heavy Equipment IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426
• ONLINE ONLY May 26, 2016
• ONLINE ONLY June 15, 2016
• El Paso, TX Tues., June 7, 2016
• Foley, MN Fri., September 9, 2016 For: Heavy Equipment
• Livingston, LA July 28 - 30, 2016 For: Summer Construction, Truck & Farming Equipment
• Las Vegas, NV Sat., September 10, 2016 For: Large Job Completion & Rental Returns Auction
COLLAR CITY AUCTIONS www.collarcityauctions.com 518-895-8150
• Foley, MN Fri., June 10, 2016 For: Heavy Equipment
• Ballard, UT Wed., May 25, 2016 For: Unreserved Public Auction
• York, NE Fri., June 10, 2016 For: NPPD Fleet Vehicle & Heavy Equipment Auction
• Chicago, IL Thurs., May 26, 2016
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230
HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252
• Johnstown, PA Sat., July 30, 2016 For: Large Mining and Construction Equipment
• Tipton, CA Thurs., May 26, 2016
• Union Dale, PA Wed., June 8, 2016 For: Surplus Liquidation Barhite Excavating, LLC
• ONLINE ONLY July 13, 2016
• ONLINE ONLY August 10, 2016 • ONLINE ONLY August 31, 2016 • ONLINE ONLY September 14, 2016 • ONLINE ONLY September 28, 2016
• ONLINE ONLY June 2, 2016 • St. Augustine, FL Wed., June 8, 2016 For: Unreserved Public Auction • ONLINE ONLY June 9, 2016 • ONLINE ONLY June 16, 2016 • Edmonton, AB Wed., June 22, 2016 For: Unreserved Public Auction • ONLINE ONLY June 23, 2016 • ONLINE ONLY June 30, 2016 • Houston, TX Tues., September 20, 2016 For: Unreserved Public Auction J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL June 7 - 9, 2016 For: Trucks, Construction & Forestry Auction J. STOUT AUCTIONS www.jstoutauction.com 360-567-8154 • Portland, OR Wed., July 27, 2016 For: Heavy Equipment & Commercial Truck Auction JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Columbia Falls, MT Wed., May 25, 2016 For: Public Auction Quiram Logging
• Kenmore, WA Sat., June 4, 2016 For: Heavy & Contractors Equipment & Vehicles
RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395
• Sutherlin, OH July 13 - 14, 2016 For: Sawmill Equipment & Supplies
• Lebanon, TN Sat., June 11, 2016 For: Heavy Equipment, Trailers, Trucks & Commercial Vehicles
• Kenmore, WA Sat., July 30, 2016 For: Heavy & Contractors Equipment & Vehicles
• Lebanon, TN Sat., September 10, 2016 For: Construction Equipment
• Kenmore, WA Sat., October 1, 2016 For: Heavy & Contractors Equipment & Vehicles • Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Midland, TX Wed., June 15, 2016 For: Absolute Truck & Equipment Public Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • ONLINE ONLY June 6 - 9, 2016 For: Construction Equipment, Trucks, Trailers & more • ONLINE ONLY June 20 - 23, 2016 For: Construction Equipment, Trucks, Trailers & more PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200
• Lebanon, TN Sat., December 3, 2016 For: Construction Equipment ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668 • Denver, CO Wed., July 13, 2016 For: Construction Equipment • Denver, CO Wed., September 14, 2016 For: Construction Equipment • Denver, CO Wed., November 9, 2016 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Tioga Junction, PA Wed., June 8, 2016 For: Halls Equipment Co. Retirement Auction • Watertown, NY Sat., June 18, 2016 For: Jefferson County Area Equipment Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Frazee, MN Wed., June 1, 2016 For: Gemstone Masonry
• Ludlow, MA Fri., June 10, 2016 For: Owners Retiring F&J,Inc.
• Litchfield, MN Wed., June 7, 2016 For: Secured Party Construction Auction
• New Philadelphia, OH Fri., June 17, 2016 For: One Owner Complete Dispersal Auction
• ONLINE ONLY June 1 - 8, 2016 For: June Online Auction
• North Franklin, CT August 5 - 6, 2016 For: Major Public Equipment Auction
UTILITY AUCTIONS www.utilityauctions.net 302-530-9103
PURPLE WAVE AUCTION www.purplewave.com 866-608-9283
• Wilmington, DE Fri., June 24, 2016 For: Construction, Utility & Forestry Equipment
• ONLINE ONLY Thurs., May 26, 2016 For: Construction Equipment • ONLINE ONLY Thurs., June 2, 2016 For: Prairie Ag Business Liquidation Auction • ONLINE ONLY Thurs., June 9, 2016 For: Construction Equipment • ONLINE ONLY Thurs., June 23, 2016 For: Truck & Trailer Auction
WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., June 11, 2016 For: Construction Equipment, Truck & Trailer Auction • Princeton, MN Sat., September 17, 2016 For: Construction Equipment, Truck & Trailer Auction
• ONLINE ONLY Thurs., June 30, 2016 For: Construction Equipment
• Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction
QUARRICK EQUIPMENT & AUCTIONS INC. www.quarrickauction.com 724-439-1621
WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300
• Uniontown, PA Thurs., June 2, 2016 For: Construction & Agricultural Equipment
• Phoenix, AZ Sat., June 11, 2016 For: Construction Equipment, Trucks & more
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 87
May Improves Response Time With Additional Service Trucks MAY from page 22
call its salesmen or service managers directly, even at night, to help them with any equipment problems. “They know our people by name and have their personal numbers,” he said. “If our mechanics need to stay up and work until all hours of the night, then that’s what they will do.”To improve upon its response time to any troubleshooting or repair needs in North Carolina, for instance, May’s service trucks and technicians are spread over a wide area between Lexington in the west and Clayton in the east. Woody said 11 technicians live between those two points and several more are employed in the dealership’s shops. May Here for the Long Term The company has recently moved from its location at 5423 U.S. Highway 70 Business in Clayton to its new 33,000 sq. ft. (3,065 sq m) facility on 19 acres at 555 Wise Rd., Clayton, N.C. “Ultimately, we are going to be here for the long term and we have to prove that to our customer base,” Woody said. Woody said that it is his wish that May
Heavy Equipment be thought of by contractors and other construction people as a company that wants to meld and work with them to make their businesses prosper. “Our goal as a company is to be the best and the largest non-mainline dealer in the mid-Atlantic states,” he said. “We offer multi-lines of equipment from the big manufacturers and of course, May represents many independent manufacturers, too. With that in mind, we also want to give the customer everything or more than the mainline dealers do by our OEM setup.” The philosophy appears to work well for May as it is very popular among construction people in the region. The proof of that can be found in the fact that, among several of the manufacturers it represents, it ranks in the top three across the country in terms of total sales volume. That is quite an accomplishment for a company that is not even two decades old. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
Spending Shows Construction Industry Rapidly Growing BUDGET from page 1
Private nonresidential construction spending increased 0.7 percent for the month and 9.3 percent from a year earlier. Simonson observed that all but one segment increased from 12 months before. The largest private nonresidential segment in March was manufacturing construction, which rose 2.2 percent for the month but dropped 2.0 percent year-over-year. The next-largest segment, power (including oil and gas pipelines), lost 1.8 percent for the month but gained 2.0 percent for the year. Public construction spending dipped 1.9 percent from a month before but is still up 6.7 percent from 12 months earlier. The biggest public segment — highway and street construction — was up 0.4 percent for the month but is up 18.8 percent year-overyear, as new federal surface transportation investments enacted last year began to impact demand, Simonson noted. Association officials said the new construction spending figures reinforce anec-
dotal reports that the industry continues to grow amid robust demand for most types of construction services. But officials warned that labor shortages are likely to become even more severe as construction firms continue to expand unless federal, state and local officials act on the measures outlined in the association’s Workforce Development Plan. “The new spending data, combined with recent employment reports, make it clear that the construction industry is growing faster than the broader U.S. economy,” said Stephen E. Sandherr, the association’s chief executive officer. “But unless firms have enough workers to keep pace with demand, construction schedules are likely to slow as firms are forced to cope with labor shortages.” For more information, visit www.agc.org. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
JOB COMPLETION AUCTION ** MOBILE M ASPHALT PHA T **
LATE MODEL MACK TRI-AXLE DUMP TRUCKS, MACK & PETERBILT TRUCK TRACTORS, LATE MODEL CAT, EARTHMOVING EQUIPMENT, HYDRAULIC EXCAVATORS, LOADER BACKHOES, LOADERS, SKID STEERS
TUESDAY, MAY 31ST @ 10:00 AM MOBILE, ALABAMA ADDRESS ADDRESS:: 1370 US Highway 43 South, Saraland, Alabama 36571 ALEX
LYON & SON
NOTE NOTE:: +DYLQJ ¿QLVKHG VHYHUDO MREV VLGH E\ VLGH ZH ZLOO VHOO the following at auction. EARL EARLY LY HILITES: 5 DUMP TRUCKS: (5) 2012 Mack GU713 (tri), HYDRAULIC EXCAVATOR: EXCA AV VATOR: 2013 Kobelco SK210LC-8, 3 RUBBER TIRED OR LOADER LOADERS: Cat 980H, Cat 972H, (2) 2014 Cat 908H2, 3 TRACT TRACTOR BACKHOES: (3) 2013 Case 580N (4x4), 4 BOOM LIFTS: (2) 2) 2007 JLG 450A A (4x4), 2008-2007 JLG 400S (4x4), TELESCOPIC FORKLIFTS: Skytrack 10054, 5 SKID STEERS: (3) 2016 Case SV280 (cab), (2) 2014 Cat 246D, ASPHALT ASPHALLT ROLLERS: OR: Case (2) 2016 IR DD130, LOADER LANDSCAPE TRACT TRACTOR: ase 580LL w/box, A TTTACHMENTS: Skid Steer: New JBX 4000 48in Pallet Forks, (2) New 12x16.5 ATTACHMENTS: 12PLLY Tires, 45 NEW SUPPORT EQUIPMENT: EQUIPMENT: New Automatic Air Hose Reel 3/8in x 50ft, New Auto Darkening Welding Helmet, New Mustang LF88 Plate Compactor, New Mustang ML80S Rammer, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 Concrete Vibrator, New 2in x 50ft Discharge Water Hose, New 3pc 14in Premium Diamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stififfff Neck Pintle Hitch, New 1in Drive Air Impact Wrench, New Auto Darkening Welding Helmet, New 5gl Steel Fuel Can, New 12V15GPM Diesel Fuel Pump, New 5 Ton Platform Scale.
For For BID ONLINE ONLINE technical technical assistance assistance call call (919) (919) 595-2907 595-2907 SALE SITE PHONE: (251) 510-1538 TERR TERRY Y A AUCTION UCTION LICENSE: 5178 WWW WWW.LYONAUCTION.COM .L LYONAUCTION.COM
ALEX EX L LYON LY YON & SON SO
SALES MAN MANAGERS AGERS & A AUCTIONEERS, UCTIONEERS, INC INC., ., BRIDGEPOR BRIDGEPORT, T, NY 13030 130 Phone: (315) 633-2944 • Fax: (315) 633-8010 Syracuse, NY (Evenings) (315) 637-8912
Page 88 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Building Extending Over River to House Researchers WATER from page 8
partly a pre-engineered metal building and partly framed by structural steel,” said Dauzat. “The south end of the building is the public entryway, and will house an interactive exhibition area intended to indoctrinate patrons on coastal restoration principles and research as it winds them toward the model — the building’s primary focal point in the center portion of the facility. “A perimeter observation deck allows the public full visual access to the working scale model of the lower Mississippi river basin below, continuing the education process, without impeding ongoing research or maintenance below.” Dauzat said, “Pulling back the curtain on the systems behind the scenes, special attention was paid to the building’s geographical orientation, which places the transverse elevations in a direct east/west solar path. External and internal shading measures were taken to limit the model’s interaction with direct sunlight at all times. Spray foam insulated walls and a high performance roofing membrane coupled with efficient and redundant HVAC and lighting systems were incorporated to maintain the model’s required constant temperature, and to help limit energy consumption in the process. “Sustainable design principles were incorporated in all facets of the design.” Garret Graves, chair, Coastal Protection and Restoration Authority (CPRA), has praised the entire Water Campus project, claiming the loss of south Louisiana communities, industry and seafood to hurricanes, floods and erosion is the greatest threat facing the state today. “Some projections put the coast of our state just south of Baton Rouge by 2100. Simply put, that isn’t an option. Today, the investment decision is about whether we want Louisiana to lead the world in proactive efforts to protect communities and restore coastal habitats for fish and wildlife or we want to have flooded homes and businesses with every storm.” The state CPRA led the planning and design effort and is funding construction of the model and facility with $16 million of Coastal Impact Assistance Program funds. Upon completion, the facility will be donated to LSU which will operate the model with funding from CPRA. The Baton Rouge Area Foundation and its real estate entity, Commercial Properties Realty Trust, are the developers of The Water Campus. LSU President F. King Alexander said, “We are pleased to partner with CPRA on this important facility, which serves as a training ground for the next generation of coastal scientists and engineers. As Louisiana’s flagship university, we continue to look for ways that academics and the pub-
The Lemoine Company photo
The Lemoine Company photo
Developing over the next decade and beyond, The Water Campus will rise on 35 acres along the Mississippi River, next to downtown Baton Rouge, La
“The 50,000 square -foot building itself is partly a preengineered metal building and partly framed by structural steel,” said Tommy Dauzat, AIA, Mougeot Architecture.
lic and private sectors can come together on projects that better our state, and helping to solve coastal erosion issues for south Louisiana is one of the most important research endeavors in which our faculty and students can be involved.” The second building to be constructed is The Water Institute of the Gulf (TWIG) , a not-for-profit, independent research institute dedicated to advancing the understanding of coastal, deltaic, river and water resource systems, both within the Gulf Coast and around the world. The mission supports the practical application of innovative science and engineering, providing solutions that benefit society. TWIG will be located on the historic Baton Rouge City Dock that was completed in 1926. In addition to being a research facility, the new building extending over the river will include a deck open to the public. It will be three stories, with offices located on the first two floors and with meeting rooms on the third floor to be used by the institute and other groups. The institute building is being paid for with $10 million from the state CPRA, and $12.4 million in state capital outlay funds. “The Water Institute of the Gulf has 45 employees currently, but that is expected to grow to 55 by the time the building is ready in summer or fall of 2017,” said Chip Groat, president and CEO of the institute.” That number of employees is expected to grow to 80 in the next five years, as the institute branches out its work, and funding opportunities, beyond the state CPRA.” Formed in February 2012, TWIG also was named to receive a portion of RESTORE Act money as a result of the Deepwater Horizon disaster in 2010. About
$4 million of that money will be available soon, and then the institute will receive $22 million over the next 15 years. The institute also is working with the state Department of Natural Resources on water issues across the state, not just in coastal areas. CPRA will occupy the third building. CPRA is the agency responsible for implementing the state of Louisiana’s $50 billion Coastal Master Plan needed to sustain the state’s coastal ecosystem, safeguard coastal populations and protect vital economic and cultural resources. CPRA will have an office on the campus, to house its 165 employees, which consists of administrators, scientists, technicians and office support staff. The estimated building cost is $9 million. Baton Rouge-based The Lemoine Company is responsible for constructing the CPRA and TWIG structures; however, work on TWIG has not begun, due to high river stages and corps permitting requirements. Jason Miranda, The Lemoine Company project manager, said the biggest challenge for crews involves the 12-month schedule. “The project falls within 1,500 feet of the Mississippi River levee, and underground work and excavations can only be done with the river stage below certain levels. Additionally, campus utility infrastructure needs to be coordinated to be online for this project to be completed.” Currently, exterior envelope work continues. Crews are engaged in roofing, waterproofing, curtainwall/glazing and metal wall panel façade. Site storm drainage, site water, site electrical and site paving base work has already been completed, along with below-grade foundations, slab on grade, steel structure
erection, concrete decks, MEP rough-in and wall framing. Tasks yet to be completed include roofing membrane and dry-in, the setting of the rooftop mechanical units and the supplying of chilled water to site for HVAC. Teams also must complete the envelope and hang drywall and finishes. Work on the CPRA building began in early August 2015 and is expected to wrap up by August 1. Equipment being used on the job includes a crane for steel erection and pile driving, an excavator for site and building utilities, a sheepsfoot roller for dirt compaction, a dozer for grading and a stabilizer for lime stabilization. Miranda explained that the property was an old residential area that had been demolished and turned into a greenfield. As for the effects of the elements, “It has been a very wet winter, which has affected the exterior envelope work and the river stage.” Once completed, more than 4,000 scientists, engineers and researchers will work on The Water Campus. Over the next ten years, planners envision the campus will include commercial offices, retail, restaurant and residential buildings. Rance said the work taking place is bringing hope to the region. “The evolution of the campus will be guided by a blueprint created by Urban Design Associates, preeminent among the nation’s urban planning firms. The site and design of the destination were selected to further enrich our cityscape by stimulating new growth downtown, which has already seen more than $2 billion in comeback investments,” said Rance. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 89
CONSTRUCTION & AGRICULTURAL EQUIPMENT AUCTION Thursday, June 2nd, 2016 @ 9:00 AM • Uniontown, PA (724)-439-1621 RT. 119 TO GALLATIN AVE EXIT. TURN WEST ON BUTE RD. – 2 MILES TO SIGN
DOZERS & CRAWLER LOADERS: Case 550H WT orops/PAT blade/2100 hr/nice Cat D4G XL cab/air/PAT blade/ 3500 hrs 07 Cat D5G LGP cab/air/PAT blade/sys 1 U/C/clean 05 Cat D5G LGP cab/air/PAT blade/rear ripper/3600 hrs/nice 07 Cat D5G LGP cab/air/PAT blade/winch/woods package Cat D5M LGP orops/PAT blade/FTC steering Cat D6K XL cab/air/PAT blade/winch/Sys 1 U/C/4100 hrs 13 Cat D6K XL cab/air/PAT blade/winch/980 hr 07 Cat D6N XL cab/air/diff steer/PAT blade/ripper/3770 hrs Cat D6R XL orops/angle blade/diff steer Cat D8H orops/winch/semi-U blade JD 450J LT orops/PAT blade/hy-stat/2100 hr/nice JD 550H LT orops/PAT blade/hy-stat/3440 hrs JD 650G XL orops/PAT blade/limb risers/screens/winch 08 JD 650J LGP cab/air/PAT blade/winch/woods pkg 11 JD 650J LGP cab/air/PAT blade/winch/woods pkg 12 JD 850K LT cab/air/semi-U blade/winch/3100 hr Komatsu D65EX-15 cab/air/angle blade/winch/4200 hrs SKID STEER LOADERS: 13 Bobcat 5600 Toolcat/cab/heat/air/high flow aux hyd/1550 hr Bobcat S130 orops/quick attach/aux hyd outlet 12 Bobcat S150 orops/quick attach/aux hyd outlet Bobcat S175 orops/aux hyd outlet/quick attach 3-Bobcat S185 cab/heat/air/aux hyd outlet/quick attach 2-11 & 12 Bobcat S205 cab/air/aux hyd outlet/quick attach 12 Bobcat S630 orops/aux hyd outlet/quick attach 12 Bobcat S650 orops/aux hyd outlet/quick attach 2-Bobcat T180 cab/heat/aux hyd outlet/quick attach 2-Bobcat T190 cab/air/aux hyd outlet/quick attach 2-Bobcat T190 orops/aux hyd outlet/quick attach Bobcat T250 cab/heat/air/aux hyd outlet/quick attach Bobcat T320 cab/air/high flow/woods package 10 Bobcat T650 orops/aux hyd outlet/quick attach 2-11 Bobcat T650 cab/air/aux hyd outlet/quick attach Bobcat S250 orops/aux hyd outlet/mechanic special Bobcat S250 orops/aux hyd outlet/quick attach/nice 07 Bobcat S300 cab/air/aux hyd outlet/quick attach/2 speed Bobcat A300 orops/2 speed/aux hyd outlet/quick attach Bobcat 773G orops/quick attach/aux hyd outlet Bobcat 843 orops/quick attach/aux hyd outlet/engine issue Case 60XT orops/aux hyd outlet/quick attach Case 1838 orops/aux hyd outlet/quick attach/680 hr Case 1840 orops/aux hyd outlet/quick attach 08 Case 450 orops/quick attach/hyd outlet/new tires Case 450CT cab/air/quick coupler/aux hyd outlet/2000 hr Case 450CT orops/power q-c/aux hyd outlet Case 465 orops/quick attach/aux hyd outlet 12 Case TV380 cab/air/quick attach/aux hyd outlet 12 Cat 236B3 orops/aux hyd outlet/quick attach 09 Cat 216B2 cab/heat/aux hyd outlet/quick attach Cat 226 orops/aux hyd outlet/quick attach 06 Cat 232B orops/aux hyd outlet/quick attach 06 Cat 248 orops/high flow aux hyd outlet/quick attach 07 Cat 257B cab/heat/air/aux hyd outlet/quick attach 14 Cat 279D cab/air/aux hyd outlet/2 speed/890 hrs Cat 287 cab/heat/aux hyd outlet/quick attach Cat 289C cab/air/aux remote/quick attach JD 260 cab/heat/quick attach/aux remote outlet JD 317 orops/quick attach/aux remote 11 JD 318D cab/heat/power q-c 13 JD 323D cab/air/quick attach/aux remote/408 hours 14 JD 329E cab/air/2speed/high flow/power q/c/840 hrs JD 329D orops/quick attach/aux hyd outlet NH LX565 cab/heat/quick attach/aux hyd outlet/1540 hr/nice NH L175 orops/quick attach/aux hyd outlet NH LT185.B cab/air/quick attach/high flow aux hyd outlet Gehl 5640 cab/heat/quick attach/aux hyd outlet/mechanic special 14 Gehl RT210 cab/air/2 speed/aux hyd outlet/quick attach/187 hr 12 Kubota SVL90-2 orops/aux hyd outlet 12 Kubota SVL75 orops/quick coupler/aux hyd outlet 13 Yanmar T175 cab/air/2 speed/power q-c/750 hr 2-ASV SR80 cab/air/quick coupler/aux hyd outlet JCB 190T orops/quick attach/aux hyd outlet New skid steer forks /bale spear/buckets/grapples/backing plates EXCAVATORS: 10 Bobcat E35 orops/3rd valve/hyd thumb/blade Bobcat 322 orops/3rd valve/backfill blade Bobcat 337 orops/3rd valve/coupler/backfill blade Bobcat 337 cab/air/3rd valve/coupler/hyd thumb Bobcat 430 cab/air/3rd valve/hyd thumb/backfill blade 08 Bobcat 435 cab/air/3rd valve/backfill blade/hyd cou-
pler/1640 hr Cat 303CR cab/heat/3rd valve/q/c 11 Cat 303.5 cab/air/3rd valve/hyd thumb/backfill blade 06 Cat 305CR cab/air/3rd valve/thumb/backfill blade Cat 308C cab/air/3rd valve/coupler Cat 311B cab/heat 07 Cat 311C cab/air/3rd valve/backfill blade/coupler Cat 312B cab/heat/3rd valve/mechanical thumb 08 Cat 312DL cab/air/3rd valve/backfill blade/coupler Cat 312DL cab/air/backfill blade/3rd valve 12 Cat 314DL cab/air/3rd valve/backfill blade/1182 hrs 12 Cat 314DL cab/air/3rd valve/backfill blade/1405 hrs Cat 315BL cab/heat/3rd valve/coupler/mechanical thumb/nice 13 Case CX55B cab/air/3rd valve/coupler/hyd thumb/240 hrs 2-Case CX80 cab/air/backfill blade/swing boom/3rd valve 13 Case CX145C cab/air/backfill blade/3rd valve/coupler/2100 hr 13 JD 60G cab/air/3rd valve/coupler/rubber tracks JD 35C cab/heat/3rd valve/hyd thumb/coupler JD 35C orops/3rd valve/rubber track/coupler JD 35D cab/air/3rd valve/hyd thumb/coupler 11 JD 120D cab/air/mechanical thumb/3650 hrs 13 JD 135G cab/air/backfill blade/3rd valve/1780 hr 10 JD 350D cab/air/3rd valve/SBG/5900 hrs/nice 08 Kobelco SK140SRLC cab/air/coupler/hyd thumb/1840 hrs 08 Komatsu PC78MR-6 cab/air/3rd valve/coupler/blade/hyd thumb Komatsu PC120LC-6 cab/heat/3rd valve/coupler Komatsu PC150LC-6 cab/air/coupler/4450 hrs/nice 1 owner Kubota KX41-3 orops/3rd valve/rubber track/blade 14 Kubota KX040-4R3A cab/air/3rd valve/rubber track/hyd thumb 3-Kubota KX71-3 orops/rubber track/3rd valve 2-11 Kubota KX121-3 orops/3rd valve/angle blade/q-c/hyd thumb 13 Kubota KX121-3 orops/3rd valve/6 way blade/q-c/hyd thumb 12 Kubota KX121-3 cab/air/angle blade/hyd thumb 2-Kubota KX121-3 orops/rubber tracks/3rd valve Kubota KX161-3 cab/air/3rd valve/rubber tracks/blade/hyd thumb 13 Kubota KX080-3 cab/air/3rd valve/rubber track/coupler/hyd thumb/1550 hrs/nice Takeuchi TB125 orops/rubber tracks/3rd valve Takeuchi TB135 orops/rubber tracks/coupler/3rd valve 13 Takeuchi TB235 cab/air/3rd valve/hyd thumb/coupler/600 hrs Hitachi EX55UR orops/rubber tracks/backfill blade 06 Hitachi ZX225 cab/air/3rd valve/coupler Hitachi ZW180 rubber tired cab/air/aux hyd/wrist-o-twist bucket 10 Volvo ECR88 cab/air/coupler/hyd thumb/2 buckets/nice Yanmar VIO27-5 orops/3rd valve/backfill blade/coupler Yanmar VIO35 orops/rubber tracks/backfill blade Doosan DX55WK cab/air/3rd valve/hyd thumb Gradall XL4100XL-2 tandem axle rubber tired WHEEL LOADERS: Cat 920 cab/heat/GP bucket Cat 928G cab/heat/air/GP bucket Cat IT28B cab/heat/coupler/bucket Cat IT28G cab/air/3rd valve/coupler/GP bucket Case 321D cab/air/coupler/bucket/forks/3rd valve 07 Case 621D cab/air/GP bucket/2700 hr Case 721D cab/air/coupler/bucket/new tires JD TC44H cab/heat/3rd valve/coupler/side dump bucket 10 JD 444K cab/air/3rd valve/coupler/bucket 12 Doosan DL220 cab/air/3rd valve/bucket/forks/coupler/1400 hrs Daewoo Mega 200 cab/heat/3rd valve/coupler/bucket/forks 06 Kawasaki 60ZV cab/air/coupler/GP bucket/5200 hr 12 Kawasaki 70ZV-2 cab/air/coupler/GP bucket/3rd valve/2100 hr Komatsu WA70-5 cab/air/coupler/bucket/forks/nice Komatsu WA95 orops/coupler/GP bucket 04 Komatsu WA380 cab/air/coupler/bucket/forks Kubota R520 cab/heat/coupler/3rd valve Kubota R420 cab/heat/coupler/backhoe attachment Hyundai HL740-7 cab/heat/GP bucket Wacker Neuson WL30 cab/heat/coupler/GP bucket 05 Yanmar V3-5A cab/heat/coupler/GP bucket/800 hrs 04 TCM L4 cab/heat/coupler/GP bucket/900 hr LOADER BACKHOES: 2-Case 580SM 4wd/cab/heat/extendahoe 8-2010 Case 580SM 4wd/cab/air/pilot controls/front cou-
pler/extendahoe/aux hyd outlet 2- 13 Cat 420F 4wd/cab/air/pilot controls/extendahoe COMPACTION: 2-10 Cat CS56 cab/air/84 in smooth drum vibratory/25003000 hr 3-10 Bomag BW211D-40 cab/heat/air/84 in vibratory Ingersoll Rand SD40 54in padsfoot drum vibratory MISC. CONSTRUCTION EQUIP: Bandit 1900 self propelled chipper w/self loading grapple/winch/steel tracks/cab/heat Cat AP655C asphalt paver (track drive) Fortress Allatt 450P asphalt paver (golf cart trail) 5’ to 8’ screed PSI MG622 compact motor grader w/cab/air/scarfire Champion 780AVHP w/cab/air/push block/rear ripper Volvo G80 orops/front blade-scarfire/10ft moldboard/1765 hr/nice Finn T120 hydroseeder Kubota diesel/spray tower/hose reel Prentice 310E log loader w/trailer/cab/air 3 -ACS 8ft pipe forks w/JRB Q/C mount Morbark SP211MP3 portable wood chipper Vermeer 1600 diesel chipper — Erskine skid steer post driver Magnum XL62 in skid steer mulching head Grouser 6 way 84 in skid steer blade — NH 609X backhoe attach Rockhound 60A skid steer attach — 4– 94” skid steer blades 2-JD 4000 rear winch for 450-700 H/J dozers Cat winch for Cat D3G-D5G dozers Geith 200 exc ditching bucket — Pemberton 5 finger exc grapple 4-unused Magnum gold 4000 hot water pressure washer 2-20ft sea container — Several Kit hopper dumpsters 2– unused 72” skid steer bucket brooms & 1 skid steer angle broom Following items all unused: 6-10ft 20 drawer tool boxes, 110V tire changer, 6– pallets of pallet racking, 50 & 75 ton shop press, 2-20’x20’ Party tent, 4-16’x22’ event tent, 5 storage buildings, 18ft iron driveway gates, 9000 lbs 2 post car lift FORKLIFTS : 13 Cat TL1055C cab/air/outriggers/tilt on forks/nice 13 Merlo P38.13EE cab/air/8300 lbs/41 ft lift/outriggers 13 Cat TH407C cab/air/coupler/aux remote 06 Gehl RS-534 orops/5000 lbs/34 ft lift/1400 hr/nice 08 Gehl RS8-42 orops/solid tires/2600 hrs/nice 06 Gehl RS8-42 cab/heat/like new tires/nice 05 Gehl DL8H44 cab/heat/8000 lbs/44 ft lift 2-12 JCB 527-55 cab/heat/6000 lbs/18 ft lift/nice Manitou 741-120LSU cab/air/coupler/bucket/forks 12 New Holland LM5030 agri lift/cab/air/aux hyd/bucket/1200 hr 06 Gradall G642P cab/heat/6000 lbs/42 ft height/1040 hrs TCM FCG25-3HL mast fork trucks Kalmar DCD120-6 mast fork truck w/cab/air/hyd forks/26000 lbs 08 JLG 400S diesel/telescopic manlift 07 JLG 460 4wd diesel telescopic manlift w/JIB boom JLG 600S 4wd/diesel/telescopic manlift w/generator 3-Genie S60 4wd/telescopic manlifts OFF ROAD TRUCKS & CRAWLER DUMPS: 06 JD 250D articulated 6wd/7200 hrs/clean JD 250D articulated 6wd engine retarder 2-07 Morooka MST2200VD crawler dumper/cab/air/rubber track 08 Morooka MST800VD crawler dumper/cab/heat/air Morooka MST800 orops/dump bed w/side 3-07 & 08 IHI IC45-2 open station 1-cab/heat/rubber track/dumpers ON ROAD TRUCKS & TRAILERS: 10 Ford F250 4wd powerstroke diesel/4 door/long bed 11 GMC 2500 4wd/Duramax/long bed/4 door/auto/81K miles 08 Dodge 5500 4wd/flat bed/manual trans/R title 97 International 9400 T/A truck w/sleeper Western Star day cab semi 03 GMC 5500 Duramax diesel w/dump bed 98 Ford F700 diesel dump 2-05 XL70 48ft tandem axle mechanical RGN trailer Talbert 35 ton hyd RGN tandem axle trailer 4-10 Interstate 12BST tag along lowboy trailers 4-Cross Country 3HD16 tag along lowboy trailers 13 B-Wise 24’ gooseneck nice — International 10 ton tag trailer General 20 ton tag trailer — Rogers 20 ton tag trailer
JOB COMPLETION /RETIREMENT AUCTION FOR LOCAL CONTRACTOR: 12 Cat D6N XL crawler dozer cab/air/diff steer/winch/limb riser/foldable blade/909 hrs/nice 13 Case 621F wheel loader cab/air/3rd valve/coupler/1300 hr/nice 13 Kubota SVL90-2 skid steer cab/air/2 speed/power quick attach 12 Kubota SVL90-2 skid steer cab/air/2 speed/power quick attach Skid steer forks — FFC Skid steer open bottom grapple bucket 2011 Linkbelt 160LX3 excavator/cab/air/3rd valve/hyd thumb/2540 hrs 12 Kubota KX080-3 excavator cab/air/3rd valve/coupler/blade/rubber tracks/coupler/hyd thumb 12 Kubota KX91-3 excavator orops/3rd valve/coupler/hyd thumb 12 Kubota R520S wheel loader cab/heat/coupler/3rd valve Bandit 3200T track drive stump grinder/remote control/290 hrs/nice 10 Canycom S25A crawler dumper w/rotating bed/300 hr 2011 Finn BB302 bark blower w/101 hrs/Kubota diesel powered 14 Kubota M135G tractor4wd/cab/air/power shift/power shuttle/loader valve/280 hrs with HLA 4000 power angle quick attach front snow plow (sells separately) Kubota M126X track drive tractor 4wd/cab/air/power shuttle/power shift/loader valve/788 hrs with HLA 4000 power angle quick attach front snow plow (sells separately) Kubota M126X track drive tractor 4wd/cab/air/power shuttle/power shift/loader valve/2287 hrs with HLA 4000 power angle quick attach front snow plow (sells separately) Kubota B2650 tractor 4wd/cab/air/mid mount mower/hydro/front blade/180 hrs 2012 New Holland T5070 tractor 4wd/cab/air/loader/2200 hr/electric high-low Landpride Commander 4515 15ft batwing rotary mower Vermeer Top Gun self loading bale chopper w/straw cannon cab controls/low use Teagle 808 3pt bale chopper w/blower 2-Oshkosh 4wd truck w/1 year old Salt Dog spreader boxes w/snow plows TRACTORS: JD 110 4wd/loader/backhoe/hydro 4– 2012 JD 1025R 4wd/loader/backhoe/hydro/100 to 300 hrs 72 JD 4020 side console/syncro/dual remotes/just off farm JD 4250 2wd/cab/air/powershift/duals JD 4310 4wd/loader/backhoe/hydro/Curtis cab JD 4320 4wd/cab/air/loader/hydro JD 4500 4wd/loader JD 6120 4wd/cab/air/power quad JD 6110 4wd/loader/power quad 3-JD 6210 2wd/cab/air/power quad/knuckle boom side arm mowers JD 6420 4wd/cab/air/IVT trans/JD 673 loader/nice JD 6430 premium 4wd/cab/air/IVT transmission/3scvs/nice JD 6715 4wd/cab/air/power quad/Tiger knuckle boom side arm mwr JD 1600T 12 ft 4wd wide area mower NH TC33D 4wd/cab/heat/front blade/super steer NH TN75A 4wd/open/loader NH TD95D 4wd/cab/air/shuttle shift NH TL100DT 4wd/cab/air/power shuttle/electric highlow/1900 hr NH TL100 4wd/cab/air/loader/shuttle shift NH TV140 bi-directional/4wd/cab/loader/3pt/pto/scvs on front-rear NH 4630 4wd/loader/shuttle shift/ 2 scvs NH 8160 4wd/cab/air/loader/power shuttle/powershift Ford 7700 2wd/cab/heat Case IH 5140 2wd/cab/air/powershift/ front weights/very nice Case IH 7140 4wd/cab/air/weights/duals Case IH MXU110 4wd/cab/air/powershift Kubota BX1860 4wd/loader/mower Kubota BX2360 & BX2660 4wd/mower/hydro Kubota B1700 4wd/mower/hydro Kubota B2620 4wd/loader/mower/hydro Kubota L5240 4wd/cab/air/hydro/loader/backhoe/nice/low hrs Kubota L5740 4wd/cab/air/hydro 11 Kubota MX4700 4wd/loader/skid steer quick attach/low hrs Kubota M6800 4wd/cab/air/shuttle shift
Kubota M7040 4wd/cab/air/hyd shuttle/loader Kubota M9540 4wd/cab/air/hyd shuttle/loader/290 hrs/nice Massey Ferguson 5465 4wd/cab/air/Alamo knuckle boom mower MF 150 gas — MF 1100 diesel McCormick MC100 2wd/open /power shuttle/power shift/900 hr McCormick CX100 4wd/cab/air/shuttle shift/front weights White 6105 4wd/cab/air/loader/nice JD 850D 4wd utility vehicle 2-Kubota RTV1140 4 seat/4wd utility vehicles Club Car XRT1500 4 seat/4wd diesel utility vehicle/Kubota diesel 2-Kubota RTV900 4wd diesel utility vehicle Scag & Country Clipper gas powered zero turn mower FARM EQUIPMENT & MISCELLANEOUS: Vermeer BP7000 bale processor, NH 472 7ft haybine, 2NH 451 sickle bar mowers, several unused 3pt rototiller 60” to 82”, Pequea HR10 rotary rake, Teagle bale self loading bale chopper w/blower, White 271 20ft rock flex wing disc, NH 355 grinder mixer, JD HX20 20’ batwing rotary mower, 2012 Landpride RC5515 15ft batwing rotary mower, Howse CFX15S 15 ft batwing mower, JD 1018 10ft 3pt rotary mower, JD 100 3pt chisel plow, IH 710 4bt ARS plow, Ford 309 2 row corn planter (restored), IH 2350 front loader attachment, H&S 125 manure spreader, 2-Gravity wagons, Several 3pt miscellaneous attachments.
9:00 am: Misc items, lawn & garden 9:30 am: Large Farm & Construction Equipment & attachments (1 ring) 3:00 pm: At approximately 3:00 p.m. we will split and sell 2 rings, with 2 auction trucks. Internet bidding will be available in both rings!!! Live Internet Bidding is available for this auction hosted by Equipment Facts. Check out their website for details at www.equipmentfacts.com
Good selection of clean equipment!!! Easy to get to, we are 20 min. from I-70, 25 min. from PA turnpike, 20 min from I-68, 30 min from I-79. TERMS AND CONDITIONS: VALID PHOTO ID REQUIRED TO OBTAIN BUYERS NUMBER.PAYMENT MADE IN FULL DAY OF AUCTION VIA CASH, GOOD CHECK, BANK WIRE TRANSFER, OR VISA/MASTER CARD WITH 3% ADMINISTRATION FEE. Note: There will be a buyers fee of $250.00 per item, for items selling for $2,500.00 & up, and a 10% fee per item, for items selling for $2,500.00 & below. ALL ITEMS ARE SOLD AS-IS WHERE IS WITH NO WARRANTIES OR GUARANTEES. WE ARE NOT RESPONSIBLE FOR FOLLOWING: ACCIDENTS ON AUCTION YARD PREMISES; REPRESENTATION OR CONDITION OF ITEMS SOLD; HOURS OF USAGE ON EQUIPMENT SOLD; PRICES OBTAINED BY AUCTION COMPANY; NO SHOWS; PLEASE CALL AHEAD TO BE SURE OF AVAILABILITY OF SPECIFIC ITEMS. ALL ANNOUCEMENTS DAY OF SALE TAKE PRECENDENCE OVER PRINTED MATERIAL. SALES TAX WILL BE COLLECTED WHERE APPLICABLE UNLESS VALID EXPEMPTION IS PROVIDED. ALL OUT OF STATE CHECKS MUST BE ACCOMPANIED BY A BANK LETTER OF GUARANTEE, CALL FOR CHECK PRE-APPROVAL.
Quarrick Equipment & Auctions Inc. PA-RH-194-L If you would like to receive a flyer by E-mail please let us know, E-mail us at info@quarrickauction.com
Visit our website for updated listing! www.quarrickauction.com ATTENTION! Dealers, Farmers & Customers, Thank you for your business!!
Page 90 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Complex to Serve as Connection to Downtown Chattanooga UTC from page 1
m) of space and more than 600 parking spaces “We know that students who live on campus make stronger connections and engage in the life of the campus at higher levels than their commuter counterparts, and so having more students live on campus is a way to improve student success. We want to be able to provide that experience to all students who want to live on campus,” said Freeman. Freeman said the location for the new housing complex is a good fit, in more ways than one. “With the opening of our new library last year, the Vine Street corridor has become increasingly important on our campus. We are seeing more and more pedestrian traffic in this area. Plus, the location allows UTC to make a greater connection with the downtown business district. Our students shop and go to movies and eat downtown already. This location just puts them closer to the action.” For future residents of the building, construction can’t be completed soon enough. “The students can’t wait. Many of them were involved in the planning of this building. They told us what they wanted to see included, so they are ready to move it as soon as it opens.” As for the parking garage and retail space, said Freeman, “Like most college campuses, we have a tremendous need for more parking. This project is sitting on what was one of the biggest parking lots on campus, so we have displaced many cars with this project. From the beginning, we knew that it had to include parking, not only for the new residents, but for others, as well. The retail and dining elements also are expected to promote activity in the area. “Just as we hope this building will connect our students to downtown, we hope it will attract others to come to campus for shopping and eating. We are proud to be Chattanooga’s university, and we want the citizens of Chattanooga to feel at home on our campus,” said Freeman. The Tennis Center included in the plans is another anticipated addition, according to Freeman. “This new facility will be outstanding. We have a very successful intercollegiate tennis program, but we’ve never been able to accommodate having the fans come out and watch the team play. This new facility will allow our tennis players to receive the recognition and support from their fans that they deserve.” While much work remains on the project, Freeman said there have been no significant issues with the new structure, to date. “So far, so good. We’ve had a relatively mild winter that has allowed work to contin-
ue making progress. We’re excited about watching it come up,” said Freeman. The facility on the west side of campus will include a bookstore outlet, a dining facility and a demonstration kitchen to help students transition to apartment living. Each room will be wired for gig service as well as wireless connectivity. The building also will feature a number of classrooms. The structure was designed based on the idea that students who live and work together form closer ties with each other and to the campus. The new complex will focus on fostering a sense of community, with open spaces on each wing and floor and throughout the building and on the grounds. The complex also is intended to serve as a connection point to downtown Chattanooga, encouraging students and faculty to be more involved in downtown through internships and research projects, as well as retail and residential options. Steven Angle, UTC chancellor, and other dignitaries took part in the school’s groundbreaking ceremony, which also featured community partners and officials with Hoar
UTC University Relations photo
There will be approximately 42,000 cu. yds. (32,111 cu m) of dirt excavated from the site.
UTC University Relations photo
“The demand for on-campus housing has surpassed what we have been able to accommodate, and we’ve had to put students up in hotels for several years,” said Yancy Freeman, assistant provost of enrollment services.
Construction, which serves as construction manager and general contractor. Chris Potter, Hoar senior project manager said, “The project site is very tight, with minimal laydown area, so timely deliveries and precise coordination will be a must. This particular area collects a lot of water when it rains, so our water management plan will be critical, especially prior to the slab on grade being placed.” The demolition of the existing racquet center was recently completed and mass
excavation and shoring are currently underway. “So far, we have been fortunate that we have not encountered any setbacks. The project is just starting, so basically everything related to the site, structure, skin and finishes has yet to be completed.” There will be approximately 42,000 cu. yds. (32,111 cu m) of dirt excavated from the site. Some of the main materials required are stone backfill, concrete, rebar, drywall, metal stud framing, conduit and pipe.
Equipment being used on the project includes excavators, bull dozers and a dump truck, all for mass excavation. Crews also will erect a tower crane for materials handling, concrete pumps, rollers, bobcats and backhoes. A parking lot and racquet center were located on the property before work began. Regarding early site work, “Due to site restrictions and depth of the excavation, an engineered shoring system will be required along three sides of the site to ensure the stability of the excavation and safety for all working within the excavation,” Potter said. “The shoring system will be installed in five-foot lifts along the three sides to receive shoring.” The project calls for housing, an underground parking garage and retail space. The parking garage and building are both concrete frames, so the structure will be the most time-consuming scope of work for the project. Hoar also is responsible for the new tennis center and courts. “This will require demolition of the existing courts and regrading of the area where the new courts are being installed,” said Potter. “We will also be responsible for installing underground utilities to serve the new tennis center. “Erosion control procedures will be a main focus for our team. We will perform daily inspections of the SWPPP provisions to ensure they are performing as required.” In 2014, River City Company commissioned a plan to look at the underutilized parcels along Vine Street largely owned by Unum insurance company and UTC, regardsee UTC page 92
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 91
AUCTION JUNE 7th, 8th, 9th, 2016 • MONTGOMERY, AL, USA
(30) 2016 MACK GU713 DUMPS
(4) 2012 CAT 140M2
(5) 2015 MACK CHU613
(4) 2016 MACK GU713 ROLLOFFS
2011 CAT 980K
2013 JOHN DEERE 700K LGP
(1 OF 5) 2012 CAT 740B
(5) 2011 CAT D7E
(1 OF 4) 2015 DEERE 544K
2007 MCCLOSKEY INTERNATIONAL 516
2012 CAT 336EL, HYD THUMB,3825 HOURS
2013 Mack GU433 Water Truck
(2) 2011 DEERE 300 D II
(2) 2011 CAT MT865C
(5) 2012 CAT 740 B
(12) 2007 MACK GRANITE CV713
(2) 2011 DEERE 844K
2011 DEERE 290GLC
(2) 2015 DEERE 650K LGP
2011 DEERE 824K
2007 PETE 335 FUEL & LUBE
(2) 2011 CAT CEPCO TS180
2014 DEERE 450J LGP
2011 DEERE 350D
(2) 2015 DEERE 644K
(13) 2013 SDI SIDE DUMPS
(2) 2011 CAT 349 EL
(2) 2015 DEERE 644K
Page 92 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Crews to Complete Tennis Center by Senate Leaders Say Early ’17, Housing Facility by June 2018 Tax Increase Would Need to Be Offset ROADS from page 1
Hoar Construction photo
The demolition of the existing racquet center was recently completed, and mass excavation and shoring are currently under way. UTC from page 90
ing how to make the area an active connector between the downtown community and the university. Kim White, president and CEO of River City Company, said, “The stateof-the-art student housing facility on Vine Street that broke ground in late 2015 is just the beginning of what we hope will be many substantial projects
along the corridor. “As the economic development engine for downtown Chattanooga, River City Company understands the importance of having a university like UTC in our downtown footprint, and how creating more housing and amenities will only add to the unique sense of place Chattanooga already claims for not only students, but also
UTC University Relations photo
The projected completion date is January 2017 for the Tennis Center, while the housing facility should be finished by June 2018.
Chattanoogans.” The new housing complex, said White, is an important one for the area, in terms of bringing students and community members together. “The Vine Street connection from Georgia Avenue to the heart of UTC’s campus is a flat, three-block walk. Within this stretch, we hope in the near future a density of housing, retail and restaurant options will be available for both student and non-student use. “Knowing how critical having a top school of choice located in our downtown is, it’s exciting for both the UTC community and the Chattanooga community. It’s a fantastic use of the property, and a design that will complement the other potential projects for Vine Street.” White, a UTC alumna, said, “The larger scope of the Vine Street corridor is to create an area that is dense with housing, retail and restaurant options. The idea of the corridor is to be able to connect some of the already booming activity in our Riverfront and City Center districts through additional activity on Vine Street all the way to UTC’s campus.” The projected completion date is January 2017 for the Tennis Center, while the housing facility should be finished by June 2018. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG
makers into session, and it’s unclear whether he’ll craft it in a way that would prevent competing plans from being considered. But the Republican governor and legislative leaders are offering little hope that they see a path forward for any tax increases in the near term. “I’m looking forward to the upcoming special session as we work to address the immediate needs of our state’s highways without raising taxes,’’ Hutchinson tweeted. The ideas that have been floated include raising the state’s motor fuel tax or partially removing the sales tax exemption on fuel. But Senate leaders have said any tax increase would need to be offset by a tax cut elsewhere, a move that would stretch a tight budget even more. The desire for a “revenue neutral’’ approach reflects a majority-Republican Legislature where several members have signed pledges vowing to never raise taxes. That desire also is fueled by an election in less than six months, and several lawmakers from both parties wary of being painted as pro-tax by rivals or outside groups. But Senate President Jonathan Dismang said the desire for a tax increase to be offset by a tax cut will remain even outside of an election year. “At this point I don’t believe there is a bill out there that is revenue neutral,’’ Dismang said. “There’s going to have to be some time taken to develop that and ultimately gain support from the legislative body, which just doesn’t exist’’ at this time. Lawmakers who had been floating the possibility of a tax increase say the sheer size of the state’s highway system — the 12th largest in the nation — shows how badly a longer term fix is needed. “That in itself ought to put it in perspective that we’ve got to figure out some kind of financial vehicle that will take care of all this infrastructure and any type of deferred maintenance,’’ said Republican Sen. Jimmy Hickey. The challenge facing the state’s highways isn’t a new one. State transportation officials have long warned that the current funding system, which relies primarily on gas and diesel taxes, faces a growing gap between revenue and needs. Highway officials say they have $20.4 billion in needs over the next decade, but expect only $3.6 billion in state and federal funding. “At some point this is about the safety and well-being of people driving on our roads,’’ said House Minority Leader Michael John Gray, a Democrat from Augusta. “I just can’t believe there won’t be some long term solutions addressed soon.’’ Hutchinson’s plan is likely to face resistance from Democrats, who are generally opposed to relying on onetime funds and diverting general revenue for the state’s road needs. The top Democrat in the Senate says coming up with a longer term highway plan is going to mean some tough choices for lawmakers. “If we can have a real deep discussion and debate about this and without just a knee jerk reaction of no new taxes, I think that’s the only way we’re going to come up with a comprehensive plan,’’ Senate Minority Leader Keith Ingram, a Democrat from West Memphis, said. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 93
TH S E AV DA E TE
UNRESERVED PUBLIC AUCTION St. Augustine, FL | June 8 Featuring Equipment from Southeastern Dealers
Consign C onsign Equipment Equipment No Now! w! V Visit isit w www.IronPlanet.com ww.IronPlanet.com Ring Power | 500 World Commerce Parkway | St. Augustine, FL 32092
WHY SELL WITH C CAT AT A AUCTION UCTION SER SERVICES VICES Ir IronClad onClad As Assurance® surance® builds buy buyer er c confidence onfidence
Global e exposure xposure tto o thousands of online bidders
Driv Drive e the right buy buyers ers tto o the sale
R Reaching eaching 1.4 MILLION Ir IronPlanet onPlanet users
Higher selling pric prices es
R Reaching eaching thousands of pot potential ential buy buyers ers thr through ough additional adv advertising ertising channels
S Strong trong local participa participation artic a on
exclusive IronClad IronClad Assurance Assurance equipment condition condition certification certification enables buyers buyers Our exclusive to bid with a high degree degree of confidence confidence resulting resulting in better better auction prices prices for for sellers. to
Consign C onsign ttoday oda ay - Please Ple c contact ontact ct your your local loca al rrepr representative eprresentativ ve SALES DIRECT OR - FL ORIDA REGION SALES DIRECTOR FLORIDA TOM FERGUSON ((954) 954) 224-4999 TOM tferguson@IronPlanet.com tferguson@IronPlanet.com
SALES DIRECT OR - SOUTHEA SALES DIRECTOR SOUTHEAST ST REGION GEORGE MA SSEY MASSEY (615) (615) 554-4338 gmassey@IronPlanet.com gmassey@IronPlanet.com
SALES DIRECTOR S ALES DIRECT OR - COASTAL COASTAL REGION RANDY WYNN (704)914-7563 RAND YW YNN (704)914-7563 rwynn@IronPlanet.com rw ynn@IronPlanet.com
GER - FL ORIDA TERRITORY MANAGER FLORIDA SENIOR TERRIT ORY MANA 863) 28 7-6357 SCOTT 287-6357 SCOTT LINDER ((863) slinder@IronPlanet.com slinder@Ir onPlanet.com
Auctioneer’ss license number AU4016. Buyer’s Buyer’ premium: emium: 10% transaction fee for items with a final selling price of $1-$10,000; 3.85% for items with a final selling price of $10,001-$33,500 (min $1,000); and $1,290 for items with a final selling price above $33,500. California nia Auction Company Bond #70259785. Preliminary Preliminary list to date. Equipment subject to change. © 1999-2016 Ir IronPlanet, Inc. All Rights Reserved. IronPlanet onPlanet®, IronClad Assurance® are registered ed service marks of Ir IronPlanet, Inc. All other marks and brands are e the property pr of their respective espective owners. Auction Business License - IronPlanet, IronPlanet, Inc - AB3127; Cat Auction Services - AB3072.
Page 94 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
UPCOMING AUCTIONS 1-OWNER COMPLETE DISPERSAL AUCTION For F&J, INC. (Owners Retiring) ONE OF SOUTHERN MA’S MOST RESPECTED CONTRACTING FIRMS
135 CARMELINA CIRCLE, LUDLOW, MA 01056
HHS Awards $260M to Health Centers to Improve Facilities
FRIDAY, JUNE 10, 9:30 AM INVENTORY OF HEAVY EARTHMOVING, SITE DEVELOPMENT, CRUSHING & SCREENING EQUIPMENT & TRUCKS
1-OWNER COMPLETE DISPERSAL AUCTION for
(Members Retiring) ONE OF THE NATURAL GAS INDUSTRY’S MOST REVERED & EXPERIENCED PLANT & PIPELINE CONST & SERVICE COMPANIES
Location: 2050 REISER AVENUE, NEW PHILADELPHIA, OH 44663
“Providing funding to help health centers renovate their facilities will allow them to provide care to more patients.” Jim Macrae HRSA
FRIDAY, JUNE 17, 9:00 AM ENTIRE INVENTORY OF SITE EXCAVATION, FACILITY & PIPELINE CONSTRUCTION EQUIP, TORQUING & TESTING EQUIP, FLEET VEHICLES, JOBSITE SUPPORT & SHOP EQUIP, TOOLS & SUPPLIES AFS MAIN FACILITY AVAILABLE VIA PRIVATE TREATY: METICULOUSLY MAINTAINED, STRATEGICALLY LOCATED & SECURE PROPERTY & BUILDING
*ATTENTION! AUCTION RESCHEDULED!* NEW DATES DUE TO PRIMARY CONSIGNORS JOB EXTENSIONS
2-DAY MAJOR PUBLIC EQUIPMENT AUCTION With Equipment From
BTB CONSTRUCTION, INC. & OTHER AREA CONTRACTORS, HEAVY EQUIPMENT & TRUCK DEALERS & RENTAL COMPANIES
275 ROUTE 32, NORTH FRANKLIN, CT 06254
FRIDAY, AUGUST 5, 8:30 AM EXCAVATION, CONSTRUCTION, COMPACTION, PAVING, CRUSHING & SCREENING EQUIPMENT, HEAVY & MEDIUM DUTY TRUCKS, TRAILERS, FLEET VEHICLES
SATURDAY, AUGUST 6, 8:30 AM GENERAL & BUILDING CONTRACTOR EQUIPMENT, AG, LANDSCAPE, MANUFACTURING, LAWN & GARDEN, JOBSITE SUPPORT EQUIPMENT, TOOLS & SUPPLIES Ohio License #2002000176, Ohio Firm #2002000177. MA License #AU736
VISIT OUR WEBSITE FOR MORE INFORMATION, TERMS & CONDITIONS ONLINE BIDDING THROUGH EQUIPMENTFACTS Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100 Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888
275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900
www.petrowskyauctioneers.com
HHS Secretary Sylvia M. Burwell announced more than $260 million in funding to 290 health centers in 45 states, the District of Columbia and Puerto Rico for facility renovation, expansion or construction. Health centers will use this funding to increase their patient capacity and to provide additional comprehensive primary and preventive health services to medically underserved populations. “Health centers are cornerstones of the communities they serve,” said Burwell. “Today’s awards will empower health centers to build more capacity and provide needed health care to hundreds of thousands of additional individuals and their families.” These awards will allow health centers to renovate or acquire new health center clinical space to help provide care to over 800,000 new patients nationwide. This investment builds on the nearly $150 million awarded to 160 health centers for construction and/or renovation in September 2015. This funding comes from the Affordable Care Act’s Community Health Center (CHC) Fund, which was extended with bipartisan support in the Medicare Access and CHIP Reauthorization Act (MACRA) of 2015. “Providing funding to help health centers renovate their facilities will allow them to provide care to more patients,” said Jim Macrae, HRSA acting associate administrator. “Perhaps more importantly though, health centers will now be able to provide more health services in one location, better meeting the needs of their communities.” Since the beginning of 2009, health centers have added six million patients; they now serve nearly 23 million people each year. Today, nearly 1,400 health centers operate about 9,800 service delivery sites in every U.S. state, D.C., Puerto Rico, the Virgin Islands and the Pacific Basin. To view a list of the award winners, visit:http://bphc.hrsa.gov/programopportunities/fundingopportunities/hiip/2016awards/. For more information, visit http://bphc.hrsa.gov/about/index.html. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 95
HEAVY H E AV Y EEQUIPMENT Q UIP ME N T | TRAILERS T R A IL E R S | TRUCKS T R U C K S | COMMERCIAL C OMME R C I A L VEHICLES V E HIC L E S
SATURDAY, S AT URDAY, JJUNE UNE 111, 1, 88AM A M CDT CD T LLEBANON, E B A NON, TTN N | BI BID DO ONSITE NSI T E O OR RO ONLINE N L IN E | N NO OA ADDITIONAL DDI T ION A L O ONLINE N L IN E B BUYERS U Y E RS FFEE EE
V IE W T HE F UL L C ATA L O G A ND P R E- R E G IS T E R F OR T HIS S A L E B Y V IS I T ING R I T C H A S ON . C OM
R RITCHASON.COM ITCHASON.COM | 6 615.454.9217 15.454.9217 |
7538 75 3 8 LINWOOD L INWOOD R RD. D. LLEBANON, E B A NON, TTN N 337090 7090
TTN N FIRM F IR M # 22048 04 8
Page 96 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
TH S E AV DA E TE
Q QUARRY, UARRY, AGGREGATE AGGREGATE AND MINING A ND M INING ONLINE AUCTION ONLINE A UCTION
June 16 C CONSIGN O N SI G N E EQUIPMENT Q U IPM E N T N NOW! OW! VISIT WWW.IRONPLANET.COM FOR MORE INFORMATION
WHY W HY SELL SELL WITH WITH IRONPLANET IRONPLANET IronClad Assurance® builds buyer confidence | Drive the right buyers to the sale | Higher selling prices No shipping costs | Global exposure to thousands of online bidders | Reaching thousands of potential buyers through additional advertising channels | Reaching 1.4 MILLION IronPlanet users
EQUIPMENT TO CONSIGN? CONTACT US TODAY!
(866) 954-0397 California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. © 1999-2016 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions You Can Trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 97
Atlanta - Georgia 300 Raymond Hill Road Newnan, Atlanta GA 30265
Tuesday, June 21st 2016 @ 1:00pm
T.
770.683.3883
100% Absolute Auction
2011 CAT 314D
2007 Komatsu PC138US-8
2007 Komatsu PC78US-6 - choice
2006 Hitachi ZX75UR
2003 CAT 305CR
2011 Komatsu PC35MR-3
2003 Kubota U40-3
2006 Hitachi ZX30-2
2008 CAT D4K XL
2007 Terex TA30
2013 CAT 908H2
2012 CAT 906H2
12-13 CAT 416E - choice
03-07 JCB 926 - choice
2011 Terex PT30
2006 JCB Robot 190
07-08 Ditch Witch SK650 - choice
Unused Bomag BW213D-4
2014 Hamm 3411 - choice
06-08 Volvo SD122DX-TF - choice
2005 CAT CP563E - choice
2004 Dynapac CP142
2001 Ingersoll Rand PT-125R - choice
05-08 CAT CB224E - choice
2012 CAT CB14
2006 JLG 450AJ
2012 Morooka MST1500VDL - choice
AM General M1038 Humvee
2006 Chrysler Sebring
Want to add your equipment to this auction? Contact Steve: T. 678.340.5831 E. swatson@euroauctions.com
Contact Nicholas: T. 205.413.3658 E. nstarnes@euroauctions.com
1997 Ford Super Duty Crew Cab
www.euroauctions.com Euro Auctions License Number AUNR003085
Page 98 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SON INC MOBILE AL........................................................................................87 ALLU GROUP ............................................................................................47 ASC CONSTRUCTION EQUIPMENT USA ..............................................2,3 ATI CORPORTATION/LEVEL-BEST ..........................................................46 ATLANTIC EQUIPMENT & SUPPLY INC ..................................................12 BANDIT INDUSTRIES INC ........................................................................69 BARGAINS ................................................................................................84 BRANDYWINE TRUCKS & EQUIPMENT..................................................27 BROOKS SALES INC ................................................................................23 BUTLER MACHINERY ..............................................................................20 CAROLINA CAT ....................................................................................14-17 CATERPILLAR ..........................................................................................65 CATERPILLAR OF FLORIDA ....................................................................13 CEG SCALE MODELS ..............................................................................74 CLASSIFIEDS ............................................................................................84 CLEARSPAN FABRIC STRUCTURES ......................................................25 CON-EQUIPMENT OF THE CAROLINAS ................................................10 CONSTRUCTION EQUIPMENT GUIDE AIR COMPRESSOR PROMO ..........................................................52 NEWSLETTER SELL SHEET ..........................................................26 WANTED ..........................................................................................85 FELLING EW SLEEPER & MIDCO TESTIMONIAL ........................31 DOOSAN INFRACORE AMERICA ............................................................83 DOOSAN PORTABLE POWER..................................................................72 DYNAPAC ..................................................................................................78 EURO AUCTIONS UK LTD ATLANTA GA ....................................................................................97 FAE USA INC ............................................................................................23 FECON ......................................................................................................67 FELLING TRAILERS ..................................................................................42 FLAGLER CONSTRUCTION EQUIP LLC ..................................................7 FLANGE LOCK ..........................................................................................29 FLECO ATTACHMENTS ............................................................................49 G S EQUIPMENT ........................................................................................9 GEHL ..........................................................................................................82 GRINDERCRUSHERSCREEN.COM ........................................................54 GROVE WORLDWIDE ..............................................................................38 HILLS MACHINERY COMPANY ..............................................................100 HOLLAND PUMP MFG ..............................................................................29 HYDRAULICIRCUIT TECHNOLOGY ........................................................48 INTERNATIONAL IRON ............................................................................19 INTERSTATE EQUIPMENT CO ................................................................23 IROCK CRUSHERS ..................................................................................60 IRONHORSE EQUIPMENT INC ................................................................27 IRONPLANET QUARRY AGGREGATE & MINING ..................................................96 SAN AUGUSTINE FL........................................................................93 JM WOOD AUCTION MONTGOMERY AL ..........................................................................91
JOHN DEERE ............................................................................................37 JRE/GEOMETRY GLOBAL ........................................................................21 KAWASAKI CONSTRUCTION MACHINERY........................................80,81 KLEEMAN ..................................................................................................58 KOBELCO ..................................................................................................73 KOMATSU AMERICA CORP............................................................32,33,79 KPI-JCI ......................................................................................................71 KUBOTA EXCAVATOR ..............................................................................75 LAND EQUIPMENT INC ............................................................................25 LAWRENCE EQUIPMENT ........................................................................99 LINDER INDUSTRIAL MACHINERY CO ....................................................5 LINK-BELT EXCAVATORS ....................................................................50,51 MAY HEAVY EQUIPMENT ........................................................................11 MOBRO MARINE INC................................................................................45 NATIONAL ATTACHMENTS ......................................................................48 NEXTRAN OF JACKSONVILLE ................................................................40 NORAM ................................................................................................76,77 NORTH AMERICAN ATTACHMENTS........................................................49 PETROWSKY ............................................................................................94 POWER EQUIPMENT CO ..........................................................................6 POWERSCREEN MID-ATLANTIC ............................................................57 QUARRICK UNIONTOWN, PA ............................................................................89 RANSOME EQUIPMENT SALES LLC/LRH ..............................................85 RITCHASON AUCTIONEERS LEBANON TN ..................................................................................95 ROAD BUILDERS MACHINERY................................................................46 RR EQUIPMENT ........................................................................................55 SANDVIK ....................................................................................................67 SANY AMERICA INC..................................................................................36 SCREEN MACHINE INDUSTRIES INC ....................................................59 SENNEBOGEN ..........................................................................................56 SOLESBEES EQUIP & ATTACHMENTS ..................................................47 STOWERS MACHINERY CORP................................................................54 TEREX CRANES........................................................................................35 TEREX POWERSCREEN ..........................................................................61 THOMPSON MACHINERY USED PARTS ................................................49 TOWMASTER INC ....................................................................................40 TRAMAC CORP ........................................................................................29 TRENCH SHORING SERVICES................................................................30 TRUCKWORX ............................................................................................41 WILCOX TRACTOR SALES INC ..............................................................25 WILSON FINLEY ........................................................................................46 ALABAMA SUPPLEMENT COWIN EQUIPMENT CO INC ....................................................................3 HEAVY MACHINES INC ..............................................................................2 JCB OF ALABAMA ......................................................................................7 THOMPSON TRACTOR CO ....................................................................4,5 TRACTOR & EQUIPMENT CO INC ............................................................8
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 25, 2016 • Page 99
Page 100 • May 25, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CASE 1150M CRAWLER DOZER THE POWER YOU NEED. THE CONTROL YOU WANT. Best-in-class drawbar pull, exclusive SCR technology, maximum visibility, a quieter cab, adjustable operator controls, time-saving servicability features and the premium product support of ProCare make the CASE 1150M the ideal dozer for nearly any job or operator. CaseCE.com/MSeries.
Call Today for a Demo. BLADE WIDTH: 120” | 3048 mm ENGINE POWER: 127 HP | 95 kW
www.hillsmachinery.com
Quality Used Equipment from Hills Machinery SPECIAL FAIR MARKET VALUE LEASE PROGRAM ON BELL ARTICULATED TRUCKS**
2013 CASE TR320 COMPACT TRACK LOADERS 3 UNITS AVAILABLE W/OROPS, ELECTRIC/HYDRAULIC CONTROLS, BUCKET W/BOE
2014 CASE TV380 COMPACT TRACK LOADER, 811 HRS, 2 SPEED ELECTRIC/HYDRAULIC CONTROLS, 84” LOW PROFILE BUCKET W/BOE, NEW TRACKS AND SPROCKETS............................$49,200 OR RENT
CT2590, 1015 HRS ........................................$28,960 CT2668, 1070 HRS ........................................$31,830 CT2861, 793 HRS ..........................................$31,740
2014 B30E’s As Low As $2,900 Per Month
2015 B30E’s As Low As $4,900 Per Month
2013 B35D’s As Low As $3,300 Per Month **Rate based on 1500 hours per year operation with satisfactory credit approval by lessor. Hours shown are subject to change.
North Carolina Greenville 415 Belvoir Hwy Greenville, NC 27834 Phone 252-752-7145
PEN!
NOW O
Greensboro 2901 Manufacturers Rd.. Greensboro, NC 27406 Phone 336-308-3045
2014 CASE 921F WHEEL LOADER, 2176 HRS, CAB, 2014 CASE 850M LGP CRAWLER DOZER, 854 HRS, A/C, HEAVY DUTY AXLES, 23.5 RADIALS, 4.75 CY OROPS, 28” OPEN GROUSERS, 124” PAT BLADE, SCREENS, SWEEPS, TELEMATICS .............................. BKT W/BOE, RIDE CONTROL, TELEMATICS ................ ..........................................CALL FOR PRICE OR RENT ..........................................CALL FOR PRICE OR RENT
PEN!
South Carolina Raleigh 1501 Hedingham Blvd. Raleigh, NC 27604 Phone 919-746-7938
Charlotte 11717 Reames Road Charlotte, NC 28269 Phone 704-208-5564
Columbia 1014 Atlas Way Columbia, SC 29209 Phone 803-658-0200
Charleston 7168B Cross County Road North Charleston, SC 29418 Phone 843-225-9377
NOW O
Greenville 11 Dixie Circle Greenville, SC 29605 Phone 864-546-5208
www.hillsmachinery.com