Southeast #3, 2010 - CEG by Construction Equipment Guide

Published Nationally ®

Southeast Edition

February 10 2010

$3.00

Vol. XXIII • No.3

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

Test piles are an important part of the project, which, according to project manager Eric Eliason, is basically being built in the middle of a lake.

Turbid Terrain Tests Crews on Fla.’s SR 26 By Kerry Lynn Kirby CEG CORRESPONDENT

It has been wet work, much wetter than expected. But now that north-central Florida has entered its “dry season,” work on a new overpass to carry Fla. 26 over U.S. 301 and the CSX railroad line in Alachua County is getting more productive, said Southland Construction Inc. project manager Eric Eliason. The Apopka, Fla.-based firm was awarded the $9.96 million contract for the job, which covers 1.75 mi. (2.8 km) and entails a realignment of Fla. 26 and construction of an overpass across the CSX railroad tracks and U.S. 301/Fla. 200 in Orange Heights, Eliason said.

AED Holds Annual C o n v e n t i o n , C O N D E X… 1 0

Bidders Vie for Surplus Equipment in Tampa…44

Briggs Equipment Iron Goes on the Block…56

Table of Contents ............4

Be Cleared March 31 NASHVILLE,

Parts Section ................40 Business Calendar ........42 Auction Section..52-57,59 Advertisers Index ..........58

see SOUTHLAND page 22

AEM Leader: Infrastructure TDOT: Rock Slide to Investment Equals Jobs Tenn.

Truck & Trailer Section .... (AP) Tennessee highway ..................................26-29 officials expect to finish Crushing, Screening & Recycling Section ....33-39

The project is intended to ease traffic and improve safety at the crossroads by allowing motorists on Fla. 26 to travel unobstructed across U.S. 301 and the adjacent, parallel CSX railroad via the roughly 25-ft.-high (7.6 m) overpass, he said. Work began on the project July 2, with a contract time of 625 days, Eliason said. “Our initial schedule called for a completion date of November 2009, but revisions to the workflow due to the wetland conditions have pushed our current completion date back to February 2010,” he said, noting that the geotechnicals that the Florida Department of Transportation had used

clearing debris from a November rock slide on U.S. Highway 64 in Polk County by March 31. A statement from the state Department of Transportation said crews have removed about 6,000 cu. yds. of debris and have been working to stabilize the adjacent mountainside as of Jan. 8. see TDOT page 14

The assembly of the giant Terex crane took eight people (including two from Dozier Crane & Machinery who came to assist) three days.

Speaking at a press conference following an invitation-only meeting of key U.S. senators, Dennis Slater, president of the Association of Equipment Manufacturers (AEM), forcibly relayed the direct connection between infrastructure investment and job creation for the construction industry and entire manufacturing sector. The meeting and conference were held to highlight the importance of infrastructure investment to putting Americans back to work. Slater was selected to attend as the sole representative of the manufacturing sector, in recognition of AEM’s leadership role in support of critical infrastructure investment and the Start Us Up USA campaign, which advocates timely passage of multi-year transportation legislation. AEM also is active in advocating for adequate water infrastructure investment. “The single best way to bring back

hundreds of thousands of good-paying, sustainable manufacturing jobs in the U.S. is to pass major long-term investments in our critical national infrastructure,” Slater noted. Senators at the meeting are working on a new “jobs creation” package of legislation, and they recognize that a central piece of that effort will be rebuilding America’s infrastructure to create jobs, grow the economy and maintain and improve our nation’s safety, environment and international competitiveness, Slater noted. The meeting in the U.S. Senate was co-chaired by Senate Majority Leader Harry Reid (D-NV); Senator Debbie Stabenow (D-MI), chair of the Senate Democratic Steering and Outreach Committee; and Senator Patty Murray (D-WA), chair of the Transportation Appropriations Subcommittee. In addition, 19 Senators attended, see INFRASTRUCTURE page 14

Page 2 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MOBRO MARINE, INC. 606 S. R. 16 East, Green Cove Springs, FL 32043

904-284-9670 Fax: 904-358-8706

Email: ncorrado@mobromarine.com

2003 Hitachi Sumitomo 2007 Kobelco CK1000 HD

2007 Kobelco CK1000

2009 Kobelco CK2500-II

American 5299

American 7250

Link Belt LS98

Cat 375

Barge 607

N35

Amer 5530

Mobro Dredge IMS

Mobro ExNavy Landing Tugs

Mobro Tug 1

Mobro Tug 2

Mobro Tug 3

American 4450

Mobro Doubletime Crewboat

CRANES 2003 Hitachi Sumitomo 240 ton Hydraulic crawler crane – 220’ main boom, 4 sheave block, ball ..................$$1,100,000 2009 Kobelco CK 2500II – low hours, 250 ton crawler crane w/200’ boom, freefall drums, block and ball ........$$1,550,000 2007 Kobelco CK 1000III – low hours, 100 ton crawler crane w/150’ boom, 3 drums, freefall, block and ball ........$$695,000 2007 Kobelco CK1000III HD – low hrs, 100 ton crawler crane w/150’ boom, 3 drums, freefall, block and ball ........$$705,000 7250 American 60 ton crawler crane – 100’ boom, block and ball ..............................................................................$$75,000 5530 American truck crane, 75 ton capacity – 150’ boom and 40’ jib, block and ball ..........................................$$95,000 4450 American truck crane, 35 ton capacity – 100’ boom, block and ball..............................................................$$75,000 5299 American 50 ton crawler crane – 100’ boom, block and ball ............................................................................$$150,000

SALES & RENTALS

1987 Linkbelt LS 98, 40 ton crawler crane – 70’ boom, block and ball............................................................$$140,000

EXCAVATOR 1996 Caterpillar 375L Hydaulic Excavator – 3 buckets and quick coupler. Buckets included: Hawco clamshell, 4 yd digging, 2 yd ditching and quick coupler ......................$$185,000

BARGES – TUG BOATS – DREDGE Tug “Troy” 29’X13’X5’ steel hull w/ twin engine 6v71 Detroit Diesel ..........................................................$$215,000 Ex- Navy LCM landingcraft tugs - Cummins(new engines) .... ....................................................................................$$95,000 (Ambush and Gunsmoke) - Detroit(used engines) ....$$85,000 “Doubletime” crewboat 24’X8’ Aluminum hull ........$$35,000 Tug “Scuffy” 23.7’X20’X5.8’ Steel hull w/twin 6v71 Detroit D i e s e l ......................................................................$$225,000

Tug “Bogy” 100’X28’X7.8’ Steel hull w/single engine and generators ................................................................$$575,000 B a r g e “ A l a b a m a ” 140’X65’X9’ Steel hull barge w/two 36” round spudwells ................................................$$200,000 Barge “Jax III” 120’X40’X8’ Steel hull barge w/ two round spudwells ................................................................$$150,000 Barge “mobro 910” 135’X44’X8’ Steel hull barge w/two square 24” spudwells ..............................................$$175,000 B a r g e “ D i x i e 4 4 0 9 ” 1 9 5 ’ X 3 5 ’ X 1 0 ’ S t e e l h u l l b a r g e $200,000 Dredge IMS 4010HT 24’X8’ ......................................$$85,000 Barge FS 27 250’X50’X16’ Steel hull barge ..........$$875,000 Barge “607” 110’X32’X9’ Steel hull barge ............$$150,000 Barge “608” 110’X32’X9’ Steel hull barge ............$$150,000 Barge “609” 110’X32’X9’ Steel hull barge ............$$150,000 Barge “N35” 50’X18’X4’ Steel hull barge ................$$40,000

NORTH FLORIDA’S NEW KOBELCO CRANE DEALER YOUR “ONE-STOP” SOURCE FOR ALL YOUR MARINE CONSTRUCTION EQUIPMENT

NOW SELLING & SER VICING KOBELCO CRANES

C a l l N e i l C o rr a d o : 8 6 6 - 3 1 3 - 9 6 7 0 o r 9 0 4 - 2 8 4 - 9 6 7 0 • C e l l : 9 0 4 - 5 7 1 - 9 2 7 0

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 3

Your VOLVO dealer in The Carolinas • Georgia • Alabama • East Tennessee

CRAWLER EXCAVATORS

MOTOR GRADERS

(2) 2004 Volvo EC140BLC, 1169-2360 Hrs........................$$60,000-$64,000 (5) 2006 Volvo EC140BLC, 807-1946 Hrs..........................$$45,000-$95,000 2006 Volvo EC160BLC, S/N 11100775, 951 Hrs ..............................$$90,000 (3) 2004 Volvo EC210BLC, 2321-5074 Hrs........................$$47,000-$95,000 2006 Volvo EC210BLC, S/N 11100985, 1539 Hrs ............................$$95,000 (4) 2007 Volvo EC210CLC, 602- 2779 Hrs ......................$$82,500-$126,000 2006 Volvo EC240BLC, S/N 11102327, 1874 Hrs ............................$$70,000 2007 Volvo EC240BLC, S/N 11103018, 1991 Hrs ..........................$$132,000 (3) 2008 Volvo EC240CLR, 1228-1443 Hrs ..................$$180,000-$190,000 2006 Volvo EC290BLC, S/N 11102217, 2043 Hrs ..........................$$140,000 $140,000-$156,000 (2) 2007 Volvo EC290BLC, 1340-1772 Hrs....................$ 2005 Volvo EC330BLC, S/N 11101357, 2268 Hrs ..........................$$171,600 (2) 2006 Volvo EC330BLC, 1800-3168 Hrs....................$$115,000-$140,000 (6) 2007 Volvo EC330BLC, 675-1605 Hrs ....................$$160,000-$202,800 2008 Volvo EC330BLC, S/N 11103374, 1025 Hrs ..........................$$195,000 2008 Volvo EC330CLC, S/N 11103459, 1248 Hrs ..........................$$205,000 2005 Volvo EC360BLC, S/N 11101440, 1876 Hrs ..........................$$170,000 2006 Volvo EC360BLC, S/N 11101452, 3481 Hrs ..........................$$118,000 2007 Volvo EC360BLC, S/N 11103200, 1129 Hrs ..........................$$165,000 2003 Volvo EC460BLC, S/N 11101497, 5996 Hrs ..........................$$149,000 (3) 2007 Volvo EC460BLC, 523-2745 Hrs......................$$235,000-$296,400 2007 Volvo EC460CLC, S/N 11103709, 2981 Hrs ..........................$$190,000 2008 Volvo EC460CLC, S/N 11103401, 635 Hrs ............................$$375,000 2002 Cat 320CL, S/N JP01LG, 4006 Hrs ........................................$$110,000 2007 Cat 328DHG, S/N 11103611, 1052 Hrs ................................$$218,000 2003 Cat 330CL, S/N JP02LG, 4590 Hrs ........................................$$148,000 2006 J.Deere 450D, S/N 11103612, 3365 Hrs ..............................$$250,000

WHEEL EXCAVATORS 2006 Volvo EW160B, S/N 12100016, 1125 Hrs..............................$$110,000 2008 Volvo EW210C, S/N 12100086, 181 Hrs................................$$185,000

COMPACT EXCAVATORS 2002 Volvo EC35, S/N 21100272, 1629 Hrs ....................................$$22,000 (2) 2006 Volvo EC35, 761-812 Hrs ....................................$$21,000-$22,000 (2) 2006 Volvo EC35A, 400-808 Hrs..................................$$23,000-$27,000 (3) 2008 Volvo EC55B, 1491-1575 Hrs..............................$$42,000-$48,000 2005 Volvo ECR28, S/N 21100166, 21 Hrs ......................................$$27,000 2005 Volvo ECR88, S/N 21100162, 1340 Hrs ..................................$$65,000 2006 Takeuchi TB175, S/N 80101095, 1341 Hrs..............................$$54,000

2004 Volvo G710B, S/N 14100308, 1751 Hrs ..................................$$80,000 (3) 2007 Volvo G940, 1183-1365 Hrs............................$$168,500-$171,500 (6) 2008 Volvo G940, 784-1203 Hrs..............................$$165,000-$195,000

COMPACT MOTOR GRADER 2007 Champion C86, S/N 24100020, 853 Hrs ................................$$85,000

WHEEL LOADERS 2006 Volvo L60E, S/N 10102770, 3264 Hrs ....................................$$76,000 2005 Volvo L70E, S/N 10101420, 5980 Hrs ....................................$$85,000 2004 Volvo L90E, S/N 10101900, 10367 Hrs ..................................$$86,000 2006 Volvo L90E, S/N 10102024, 10600 Hrs ..................................$$82,500 (2) 2007 Volvo L110F, 1521-1771 Hrs ..........................$$162,500-$165,000 2008 Volvo L120F, S/N 10103539, 1270 Hrs..................................$$195,000 2007 Volvo L150E, S/N 10103386, 1159 Hrs ................................$$245,000 $128,000 2006 Volvo L180E, S/N 10104003, 7185 Hrs ................................$ 2008 Volvo L220F, S/N 10103636, 1524 Hrs..................................$$330,000 1996 CAT IT24F, S/N 10104031, 9107 Hrs ......................................$$28,000 1995 CAT 963B, S/N 10103639, 8447 Hrs........................................$$49,000 1996 J.Deere 444G, S/N 10104030, 15062 Hrs ..............................$$20,000

COMPACT WHEEL LOADERS 2005 Volvo L45B, S/N 20100062, 4070 Hrs ....................................$$42,000 2007 Volvo L30B, S/N 20103151, 595 Hrs ......................................$$53,000 2007 Volvo L25, S/N 10103646, 1617 Hrs ......................................$$38,000

COMPACTION 2008 VRM DD16, S/N 30101733, 34 Hrs ........................................$$32,000 2008 VRM DD-31HF, S/N 30101684, 1051 Hrs ................................$$38,000 (3) 2006 VRM SD116DX, 809-1036 Hrs ..........................$$75,000-$105,000 2007 VRM SD116DX, S/N 30100816, 542 Hrs ................................$$80,000 2003 VRM SD122DX, S/N 30101906, 5834 Hrs ..............................$$37,500 (2) 2005 VRM SD122DX, 741-800 Hrs ..............................$$94,000-$97,000 2006 VRM SD122F, S/N 30101584, 24 Hrs ......................................$$97,000 1999 Wacker RD25, S/N 30101725, 2498 Hrs ..................................$$8,000 2002 Hypac C784, S/N 30100527, 614 Hrs ......................................$$55,000 2005 Hypac C832C, S/N 30101817, 1300 Hrs..................................$$30,000

MOTOR SCRAPER 2005 Euclid S12, S/N 80100142, 0 Hrs ..............................................$$3,000

ARTICULATED HAULERS (2) 1998 Volvo A25C, 12427-14091 Hrs............................$$38,000-$63,000 (2) 1999 Volvo A25C, 10064-11723 Hrs............................$$65,000-$74,000 2000 Volvo A25C, S/N 13100403, 11522 Hrs ..................................$$74,000 2003 Volvo A25D, S/N 13100713, 9221 Hrs ..................................$$138,000 2004 Volvo A25D, S/N 13102453, 3580 Hrs ..................................$$144,000 2006 Volvo A25D, S/N 13102307, 1877 Hrs ..................................$$208,000 (9) 2007 Volvo A25D, 1648-3429 Hrs............................$$169,000-$220,000 (2) 2008 Volvo A25E, 1343-2206 Hrs ............................$$230,000-$248,000 2002 Volvo A30D, S/N 13101012, 9104 Hrs ..................................$$135,000 2003 Volvo A30D, S/N 13100937, 4900 Hrs ..................................$$235,000 2004 Volvo A30D, S/N 13100966, 7040 Hrs ..................................$$185,000 (2) 2005 Volvo A30D, 4837-4841 Hrs......................................$$125,000 Ea. (3) 2006 Volvo A30D, 712-2487 Hrs ............................$$170,000-$220,000 (3) 2007 Volvo A30D, 1658-2636 Hrs ..........................$$190,000-$270,000 (3) 2008 Volvo A30E, 1053-2619 Hrs ............................$$220,000-$325,000 (2) 2006 Volvo A35D, 2883-3951 Hrs ..........................$$250,000-$275,000 (2) 2007 Volvo A35D, 1493-2176 Hrs ..........................$$245,000-$275,000 2002 Volvo A40D, S/N 13102209, 5990 Hrs ..................................$$160,000 (5) 2004 Volvo A40D, 8998-11231 Hrs....................................$$115,000 Ea. 2005 Volvo A40D, S/N 13102207, 4204 Hrs ..................................$$205,000 (2) 2006 Volvo A40D, 4070-6854 Hrs............................$$155,000-$225,000 (6) 2007 Volvo A40D, 3012-4248 Hrs............................$$260,000-$400,000 (6) 2008 Volvo A40E, 2328-4239 Hrs ............................$$345,000-$490,000

BACKHOE LOADERS 1998 New Holland 555E, S/N 10104055, 615 Hrs ..........................$$16,000 2007 Volvo BL704ROS, S/N 22100328, 1734 Hrs............................$$47,000 2007 Volvo BL704CAS, S/N 22100331, 1768 Hrs ............................$$56,000

SKIDSTEERS 2004 ASV RC85, S/N 23100182, 781 Hrs ........................................$$23,000 2004 CAT 247, S/N 23100320, 2400 Hrs ..........................................$$16,500

PAVERS 1999 VRM PF-161, S/N 31102149, 9711 Hrs ..................................$$27,000

WATER TRUCK 1994 CAT 613C, S/N 80101141, 15000 Hrs......................................$$47,000

TRACK PAVER 2005 Lee-Boy 8500T, S/N 80101217, 1256 Hrs ..............................$$60,000

Contact: Doug Wilson 704-562-2032 Fax: 704-494-8196 Email: doug.wilson@ascvolvo.com www.ascvolvo.com Billy Brice - Southeast U.S. - 678-592-1004 Email: billy.brice@ascvolvo.com ASC has an expansive Volvo rental fleet. Call for more details.

Serving You From North Carolina: Charlotte, Raleigh, Asheville, Greenville. South Carolina: Columbia, North Charleston, Piedmont, Georgia: Acworth, Buford, Forest Park, Savannah Alabama: Birmingham, Huntsville, Montgomery, Mobile, Tennessee: Knoxville, Chattanooga

Page 4 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SOUTHEAST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING

Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

COBLE TRENCH SAFETY OPENS 10TH BRANCH IN ATLANTA

Specializing in the rental and sales of trench safety equipment, Coble also offers OSHA-compliant training classes, and traffic safety equipment rental and sales.

SAN ANTONIO HOSTS ANNUAL AED CONVENTION,CONDEX

In an effort to show Congress’s attention to the economic consequences that failure to renew the Federal highway program will cause for Texas as well as the rest of the United States, a rally was held on the opening day of the convention.

12 12

U.S. TRANSPORTATION SECRETARY ANNOUNCES FEDERAL ROAD PROJECTS

Sixty-eight road projects in 31 states will receive $93.9 million in Public Lands Highways grant funds to improve access to public lands.

$75M IN STIMULUS CASH BENEFIT GEORGIA HIGHWAYS

Federal stimulus dollars have been awarded for road widening and resurfacing.

SE EQUIPMENT INC. EXPANDS ADDING TWO NEW DEALERSHIPS

SE Equipment plans to continue expanding in contiguous territory to be able to increase its coverage to represent the Bobcat line.

YODER & FREY HOLDS SALE FOR FLATIRON-TIDEWATER SKANSKA

A combined surplus liquidation auction in Tampa, Fla. featured surplus iron from recently completed projects near the Tampa airport.

ALEX LYON & SON HOLDS PRE-FLORIDA AUCTIONS SALE IN TAMPA

Founder, Publisher & CEO Vice President Emeritus Southeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

Toll Free Fax e-mail Contact

• Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands Edwin M. McKeon Sr. Hal Ewing Richard C. McKeon Craig Mongeau Peter Suanlarm Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910

www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

Richard C. McKeon • North & South Carolina • Tennessee • Virginia 704/366-1342 800/288-4234 704/366-1344 rmckeon@cegltd.com Rich Olivier • Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida Panhandle 770/443-3174 800/409-1479 770/443-3176 rolivier@cegltd.com Jim Van Natta • Florida • Virgin Islands • Puerto Rico

Toll Free Fax e-mail

407/365-5720 800/344-3026 407/366-3192 jvannatta@cegltd.com

Contact

Dale Agnew • Louisiana

Toll Free Fax

877/877-4997 972/719-2611 dagnew@cegltd.com

e-mail

The sale was billed as a “complete liquidation auction for Briggs Equipment” and featured a wide array of Case Equipment.

42 BUSINESS CALENDAR 50 CLASSIFIEDS 54 COMING AUCTIONS

EQUIPMENT… 53 AIM HDT40 Universal Mechanical Thumb

Construction Equipment Guide Southeast Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2009, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 5

Gatorback Tracks & Equipment LLC St. Augustine, FL Jacksonville, FL 877-748-7299 904-622-7141

New and Used Equipment Sales • Rubber Tracks and Undercarriage Parts

New Mustang Equipment Available

MTL316 Stone Pallet

MTL325 Gravel

2109 Dump

MTL320 Hay Bale

1999 Bobcat 763, 2500 Hrs ......$$7,900

2009 Mustang MTL312, Enclosed Cab, 2003 John Deere 450HLGP, 2320 A/C............................................$$28,500 Hrs, OROPS, 80% U/C ........$$29,900

2006 Big Tex Pintle Hitch Tr a i l e r, Elec. Brakes, 22500GVWR ....$$4,500

2005 John Deere 650J LGP, 1000 Hrs, One Owner ................................$$54,900

2002 JD 624H, Cab, A/C, Quick Tach w/Root Rake, One Owner......$$59,900

1989 Volvo A25, 5000 Gallon Water Truck ....................................$$18,500

2005 Gehl CTL80, 1190 Hours, New Tracks and Sprockets ..........$$19,900

1996 Komatsu CD50, Steel w/Rubber Pads, 360˚ Rotating Dumper ....$$39,900

2006 Gehl RS6-42, 700 Hrs $29,900

Woods Batwing Mower ........$$1,950

Hyster High Lift Container Handler H1050E, 4300 Hrs ................$$199,900

1978 Cat 245, Located in Indiana, 20k in Recent Repairs ......................$$29,900

2006 Mustang MTL25, Cab, A/C, 190 Hrs ................................$$37,500

1995 Komatsu CD50, New Chains and Sprockets, New Roadliner Pads..$$44,900

2009 Gehl CTL55 Standard ROPS, New Machine ........................$$24,500

2008 Mustang 1503, 95 Hrs, Aux. Hydraulics, 3 Buckets ..........$$17,900

2007 Kaufman Gooseneck 24k lb Tr a i l e r, 36ft ............................$$7,900

2006 Nissan 8000lb Forklift, 60” Forks, 5000 Hrs, Pneumatic Tires ........$$5,995

Alitec MG747 Grader, 300 Hrs ........ ............................................$$19,900

SPECIAL SALE - GATORBACK TRACKS

2007 Gehl 373, Rubber Tracks, only 150 hours ..................................$$22,900

Undercarriage Parts

www.gatorbacktracksandequipment.com

1996 Mack with Demo Trailer .............. ....................................................$$24,900

Page 6 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CCS Equipment Sales CCS Equipment Sales Offering Takeuchi Special Financing! 5428 Highway 96 • Youngsville, NC 27596 Raleigh • Durham

919/556-9110

2.9% Financing for 60 Months

INTRODUCING the all-new TL250 High Flow...Great for Cutter Head Attachments. They are engineered with the power and strength of a track loader in an agile and maneuverable size. 2007 Takeuchi TB1140 (31,878 lbs.) excavator 1100 hrs, hydraulic thumb, rubber pads, blade, independent boom swing ................................................................................................$$81,000 2006 Takeuchi TB175CR (17,230 lbs.) excavator 1350 hrs, quick coupler, hydraulic thumb, rubber tracks, blade ........................................................................................................$$41,900 2006 Takeuchi TB145R (10,562 lbs.) excavator 1670 hrs, rubber tracks, blade ..........$$24,500 2007 Takeuchi TL150CR rubber track loader 710 hrs, cab, A/C, heat, straight bucket, forks, 40% tracks ......................................................................................................................$$34,900 2005 Takeuchi TL140R rubber track loader 2075 hrs, 80% tracks, 4N1 bucket............$$18,500 2007 Takeuchi TL-130R, 371 hrs, 4n1 bucket, “LIKE NEW” ..........................................$$23,500 2006 Takeuchi TL-140R, Cab, A/C, Heat, 1000 hrs, GP bucket ......................................$$24,500

Your Central North Carolina Link-Belt Dealer 5428 Highway 96 • Youngsville, NC 27596 Raleigh • Durham

0% Financing

919/556-9110

for 36 Months Spin-Ace® Series Excavators LBX Company’s Spin-Ace® excavators feature a minimum swing radius so you can get in and out of the tightest job sites.

2006 Link-Belt 130LX 2400 hrs, 24” bucket, Mechanical thumb, 24” pads ....$$49,900 2006 Link-Belt 160LX, 1600 hrs, hydraulic thumb, Esco bkt, 24” pads, A/C ..$$62,500 2005 Link-Belt 240LX 3200 hrs, hydraulic thumb, 42” bucket ........................$$75,000 1998 LInk-Belt 2650 Quantum, 5700 hrs, 10’ arm, 24” pads, excellent condition ...... ........................................................................................................................$$24,500 1997 Link-Belt 2800Q 7300 hrs, 36” bucket, 9’10” Stick ................................$$29,500 1995 Link-Belt 2800Q 6200 hrs, 42” bucket....................................................$$24,500

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 7

Used Specials from May Heavy Equipment Columbia, SC • Lexington, NC

For Your Best Deal, Call Will Blackerby 336-239-6555

2006 Cat D5G LGP, S/N RKG02157, 2639 hrs, EROPS, A/C, Heat, Hystat, Pat Blade, Sweeps, Draw Bar ..............$$60,000

2006 Cat D6R LGP, S/N WRG00373, 5002 hrs, EROPS, Joy Stick Controls, SU Blade, 80% U/C ........................$$137,500

2002 Cat 312CL, S/N CBA00473, 3393 hrs, A/C, Heat, VGC, Thumb........................................................................$$51,000

2002 Komatsu PC200LC-7, S/N 201021, 5193 hrs, A/C, Heat, Wide Pads, 48" Bucket ......................................$$61,500

2006 Komatsu PC200LC-8, S/N C60104, 2113 hrs, A/C, Heat, Radio, Wide Pads, 42" Bkt, Very Good Condition .......... ..................................................................................$$79,000

2005 Volvo EC290, S/N V12760, 4394 hrs, A/C, Heat, Wide Pads, 60' Long Reach ................................................$$92,500

1999 Fiat FG65C, S/N 85S05328, 1884 hrs, Canopy, Artic., 10' Blade, Front Blade Scafire ....................................$$38,000

2003 Cat CP433E, S/N CFK00200, 1460 hrs, Canopy, 66" Pad Foot ....................................................................$$43,000

2001 Cat 613C, S/N 8LJ02185, 4500 hrs, EROPS, A/C, Heat, VGC Condition............................................................$$57,500

www.mayequip.com

Page 8 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Power Equipment

2006 Bomag BC1172RB

Used & Rental Fleet Quality at Auction Prices Most Machines carry a 6 month / 500 hour powertrain warranty. Komatsu PC200LC-7, #C5188, 2004, 3,750 Hrs, Plumbed, 6 Month/ 500 hrs $61,600

Komatsu D65PX-15, C0397, 2005, 3,490 Hrs, 6 Month/ 500 hrs $77,000

ROLLERS/COMPACTION Ingersoll Rand SD77DX, #C0354, 2004, 1,100 Hrs, Padfoot/Shell Kit ..........................................$$33,000 Ingersoll Rand SD77DX, #C0436, 2005, 1,100 Hrs, Padfoot/Shell Kit ..........................................$$33,000 Hamm 3410, #C0561, 2008, 650 Hrs, 6 Month/500 hrs ................................................................$$66,000 Hamm 3410, #C5504, 2008, 520 Hrs, 6 Month/500 hrs ................................................................$$66,000 Hamm 3410, #C5508, 2008, 950 Hrs, 6 Month/500 hrs ................................................................$$60,500 DOZERS Komatsu D31EX-21A, #C5435, 2007, 300 Hrs, 6 Month/500 hrs ..............................................$$38,500 Komatsu D39EX-21A, #C0385, 2005, 2,270 Hrs, 6 Month/500 hrs ..............................................$$35,200 Komatsu D39EX-21A, #C0381, 2005, 2,330 Hrs, 6 Month/500 hrs ..............................................$$35,200 Komatsu D41EX-6C, #C0497, 2007, 1,000 Hrs ........ ......................................................................$$53,900 Komatsu D61PX-15, #C0392, 2005, 3,870 Hrs, 6 Month/500 hrs ..............................................$$71,500 Komatsu D65EX-15, #C5152, 2004, 3,140 Hrs, 6 Month/500 hrs ..............................................$$77,000 Komatsu D65EX-15, #C0396, 2005, 4,010 Hrs, 6 Month/500 hrs ..............................................$$71,500 Komatsu D65PX-15,C0397, 2005, 3,490 Hrs, 6 Month/500 hrs ..............................................$$77,000 Komatsu D155AX-5B, #C0457, 2006, 2,210 Hrs, 6 Month/500 hrs ............................................$$231,000 Komatsu D275AX-5, #C0539, 2002, 12,460 Hrs ...... ....................................................................$$209,000 EXCAVATORS Komatsu PC138USLC-2, #C5162, 2004, 2,690 Hrs, 6 Month/500 hrs ..........................................$$46,200 Komatsu PC138USLC-2, #C5163, 2004, 2,790 Hrs, 6 Month/500 hrs ..........................................$$46,200 Komatsu PC200LC-7, #C0226, 2004, 3,170 Hrs, 6 Month/500 hrs ..............................................$$61,600 Komatsu PC200LC-7, #C5175-T, 2004, 3,240 Hrs, Thumb, 6 Month/500 hrs..............................$$63,800 Komatsu PC200LC-7, #C5185, 2004, 3,240 Hrs, Plumbed, 6 Month/500 hrs ..........................$$63,800 Komatsu PC200LC-7, #C0261, 2004, 3,600 Hrs, Plumbed, 6 Month/500 hrs ..........................$$61,600

Komatsu PC200LC-7, #C5188, 2004, 3,750 Hrs, Plumbed, 6 Month/500 hrs ..........................$$61,600 Komatsu PC200LC-7, #C0413, 2005, 3,340 Hrs, 6 Month/500 hrs ..............................................$$63,800 Komatsu PC220LC-7, #C5196, 2004, 3,700 Hrs, 6 Month/500 hrs ..............................................$$70,400 Komatsu PC220LC-7, #C5261-T, 2004, 4,140 Hrs, Thumb, 6 Month/500 hrs..............................$$70,400 Komatsu PC220LC-7, #C5201, 2004, 4,700 Hrs, Long Reach, Bkt., 6 Month/500 hrs..............$$82,500 Komatsu PC300LC-7, #C5205, 2004, 4,990 Hrs, 6 Month/500 hrs ..............................................$$82,500 Komatsu PC400LC-6M, #C5304, 2004, 3,540 Hrs, 6 Month/500 hrs ..............................................$$99,000 Komatsu PC400LC-6M, #C5303, 2004, 4,090 Hrs, 6 Month/500 hrs ..............................................$$99,000 Komatsu PC400LC-7, #C5218, 2004, 4,720 Hrs, 6 Month/500 hrs ..............................................$$93,500 Komatsu PC400LC-7, #C5220, 2004, 5,130 Hrs........ ......................................................................$$88,000 Komatsu PC600LC-8, #BP8614, 2006, 4,500 Hrs, 6 Month/500 hrs ............................................$$231,000 EXCAVATORS WITH ATTACHMENTS Komatsu PC300LC-7/GXP500R, #C5207-S/BP8002, 2004, 5,190 Hrs, Genesis Shear ................$$242,000 Komatsu PC300LC-7/GMS700, #C0238-S/BP8506, 2004, 5,350 Hrs, Genesis Shear ................$$242,000 WHEEL LOADER Komatsu WA320-5L, #C0535, 2007, 1,800 Hrs, 6 Month/500 hrs ..............................................$$88,000 ARTIC TRUCKS Komatsu HM300-1, #C0353, 2005, 3,990 Hrs, 6 Month/500 hrs ............................................$$104,500 Komatsu HM300-1, #C5300, 2005, 5,000 Hrs .......... ......................................................................$$88,000 Komatsu HM300-1, #C5327, 2005, 5,630 Hrs .......... ......................................................................$$82,500 ATTACHMENTS Tramac V1200, #C5486, 2007 ..........................C CALL Tramac V1200, #C5487, 2007 ..........................C CALL Tramac V1600, #C5491, 2007 ..........................C CALL

Call John Noble

Knoxville, TN 865-579-7346

Trash Compactor, Dealer Serviced & Maintained Ready to go to Work, $339,000

PLEASE CALL DOUG MEHNER OR DAVID MEHRTENS (913) 371-3822

Coble Trench Safety Opens 10th Branch in Atlanta, Ga. Coble Trench Safety Inc. (CTS), a Greensboro-based company specializing in the rental and sales of trench safety equipment, as well as OSHA-compliant training classes, and the rental and sales of traffic safety equipment has opened a new branch in Atlanta, Ga., which will service the Atlanta metropolitan area and surrounding area in Alabama, Georgia and Tennessee. “We are very excited about our new Atlanta operation,” said Tom Coble, president of CTS. “The Atlanta branch is our seventh expansion outside the state of North Carolina, and will be the tenth fully-staffed operation of Coble Trench Safety in the United States.” The new branch will be managed by Matt Pace with Coble Trench Safety’s Vice President — Operations, Matt Coble, help-

ing to develop the initial branch presence for the company. Matt Coble has many years of direct successful experience in the equipment rental industry in a variety of positions. Pace and Coble will be responsible for the Atlanta market for CTS. “We are fortunate to have Matt Coble and Matt Pace heading up our new Atlanta location,” said Coble. “Their successful track record and specific industry experience will truly be an asset to Coble Trench Safety and our customers in the Atlanta market.” In maintaining the objective of building a network of trench and traffic safety branches, CTS plans to open at least one to two other new branch operations in the coming year with additional branches to follow. For more information, visit www.cobletrenchsafety.com.

Keep Up With All the Industry News Subscribe to Kingsport, TN • Chattanooga, TN • Nashville, TN Knoxville, TN • Memphis, TN • Tupelo, MS

Construction Equipment Guide Today! Toll Free

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ February 10, 2010 â€˘ Page 9

Kdakd ^h ndjg XdbeaZiZ gdVY WjâY^c\ gZhdjgXZ# 6 XdbegZ]Zch^kZ gVc\Z d[ eVk^c\! XdbeVXi^dc! \gVY^c\ VcY bâa^c\ bVX]^cZh VcY XdchigjXi^dc ZfjêbZci \^kZh ndj ZkZgni]^c\ ndj cZZY [dg i]Z gdVY V]ZVY#

4(%Ă‰2/!$ !(%!$ )3Ă‰7)$%Ă‰/0%.

Kdakd gdVY bVX]^cZgn ^h hjeedgiZY lî] ldgaYl^YZ Zc\^cZZg^c\! iZX]cdad\n VcY XjhidbZg hZgk^XZ# I]Z gZhjai/ i]Z ]^\]"eZg[dgbVcXZ ZfjêbZci VcY hjeedgi ndj ZmeZXi [gdb Kdakd# ;dg bdgZ ^c[dgbVi^dc! XdciVXi ndjg adXVa 6H8 8dchigjXi^dc :fjêbZci YZVaZg# L]Zc ndjÂźgZ gZVYn id hiVgi WjâY^c\ gdVYh! i]Z higZc\i] d[ Kdakd ^h dc i]Z gdVY [dg ndj#

-OREĂ‰#ARE Ă‰"UILTĂ‰)N Acworth, GA 6h]Zk^aaZ! C8 770-529-5125 -'-"+-,"%+'% Atlanta, GA 770-319-0074 8]VgadiiZ! C8 Buford, GA ,%)"*.+"-'-( 678-318-9500 <VgcZg! C8 Savannah, GA .&."++&"-,&% 912-964-8079

lll#VhXkdakd#Xdb

ATLANTIC CAPITAL COMPANIES, INC.

DEALER

10429 Success Street, Ashland, VA 23005 Phone: (804) 798-8840 Fax: (804) 798-9505 info@accranes.com www.ACC-Capital.com

Asheville, NC Greenville, NC Piedmont, SC <gZZck^aaZ! C8 828-687-0620 252-754-5280 E^ZYbdci! H8 864-704-1060 Charlotte, '*'",*)"*'-% NC Cayce, SC -+)",%)"&%+% Chattanooga, TN 704-596-8283 423-308-7940 8VnXZ! H8 803-791-07408]ViiVcdd\V! IC Garner, NC North Charleston, SC Knoxville, TN -%(",.&"%,)% )'("(%-",.)% 919-661-8710 843-414-1120 865-525-1845

Cdgi] 8]VgaZhidc! H8 -)(")&)"&&'%

@cdmk^aaZ! IC -+*"*'*"&-)*

USED CRANES 2001 1996 1998 2002 2000 1997 1999 1998 1990 2003

American Link-Belt Link-Belt Liebherr Liebherr Liebherr Manitex Terex Grove Grove

HC80 LS218H HTC8670 LR 1400/2 1080-1 (New Engine) 1120 M22101S T340 RT528C (New Paint) GMK5240

80t Crawler 100t Crawler 70t TC 450t Crawler 100t AT 165t AT 22t BT 40t TC 28t RT 240t AT

$295,000 $395,000 $250,000 Please Call $425,000 $650,000 $99,500 $95,000 $65,000 $1,199,000

WINDMILL / PLANT CRANES - OUR SPECIALTY! New 2009 2000 2007

Demag Demag Demag

AC700SSL CC2800-1 (Low Hours) CC2400

800mt AT 600mt Crawler 400mt Crawler

Please Call Please Call Please Call

200t AT 600t AT 600mt Crawler

Please Call Please Call Please Call

200t AT 250t AT

$1,475,000 Please Call

NEW & USED DEMAG CRANES New 2009 2009 2006

Demag Demag Demag

AC160-2 (In Stock) AC500-2 CC2800-1 (Low Hours)

NEW TADANO CRANES CC2400

RT528C

New Tadano Mantis Crane dealer for Virginia, Maryland, D.C. & Delaware Call Wally Jones or Scott McDougle wally@acc-capital.com / scott@acc-capital.com

New 2009 New 2009

Tadano Tadano

ATF160G-5 ATF220G-5

NEW & USED TADANO MANTIS CRANES 2000 2010 2010

Mantis Mantis Mantis

14010 14010 20010

70t Crawler 70t Crawler 100t Crawler

$325,000 Please Call Please Cal

CALL JUSTIN OR STEVE FOR YOUR CRANE PARTS, BOOM & ACCESSORIES!

Page 10 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

(L-R): Richard O’Connell and Chuck Roberson of IronPlanet have been discussing the convention with Corky Underwood, RECS Rental Equipment, Prosper, Texas.

Hyundai Construction Equipment showed off its new line of excavators, wheel loaders and skid steer loaders

San Antonio Hosts Annual AED Convention, CONDEX

he Associated Equipment Distributors (AED) held its annual convention and CONDEX in San Antonio Jan. 20 to 22. Attendees enjoyed the hospitality of the San Antonio Marriott Rivercenter Hotel for accommodations, open suites for use during the event and social events. The Henry B. González Convention Center hosted CONDEX as well as a number of conferences, meetings and catered meals for attendees. Michael Marks, moderator of AED Summit 2010, was the event’s host, presiding over all the convention activities throughout the three days. In an effort to draw Congress’s attention to the economic consequences that failure to renew the federal highway program will cause for Texas as well as the rest of the United States, a rally was held on the first day of the convention. “Start Us Up USA!” was sponsored jointly by AED and the Association of Equipment Manufacturers. The rally was followed by a caravan of Dennis Slater, president of AEM, speaks to the trucks carrying unused construction equipment draped crowd at the Start Us Up USA! rally, sponsored by in banners winding its way through the streets of San AEM and AED. Antonio, representing the large amount of jobs lost and equipment left idle by the industry depression. see AED page 18

Pat Hicks of Ritchie Bros. Auctioneers starts the bidding for the Ritchie Bros.’ “Blue Moon Auction.”

Toby Mack, president & CEO of AED, addresses the crowd at the Start Us Up USA! rally.

The Alizma Triplets stopped by the Industrial Seats Co. booth to play for (L-R) Bill Wickert, product manager; Scott Radtke, vice president; and Paul Monfardini, president, all of United Group Inc., Lake Forest, Ill.

The Convention Center and tourist area of San Antonio is accented by the beautiful and serene Riverwalk.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 11

LIKE NEW LOADERS AT LESS THAN HALF THE PRICE!!! $78,000 Complete Factory Remanufacture in 2001, Marine Corps Contract. Everything was gone through (engines, axles, transmissions, pivots, etc.) at that time and the units have very low hours since the remanufacture process. Erb is putting on new paint, new air conditioning units, new 4 yard buckets. Units vary in hours and pricing. Pricing for a unit with less than 1,500 hours with new paint, air conditioning, hydraulic quick coupler, new bucket and good rubber: $78,000

JD 400D, New 8000 Gallon Water Kobelco SK 220LC, with 2nd Tank, U9435 ..................$215,000 member UP50 rotating shear, bucket & stick, U9984 ....$95,000 5 SHEAR UNITS SET UP

JD 772D, Trimble GPS, Ripper/Scarifier, 1540 hrs, PT + HYD warranty 7/2014, U9083 ...... ......................................$209,000

Link-Belt LS6400, with 2nd member shear, cab riser, 140,000 LB weight, 5 Shear Units Set Up, U9469 ..............................$97,000

Hitachi ZX800, 6951 Cat D6H, Orops, Winch, Cat 324DL, with 60 foot JD 350D, with new 60 foot Cat 120H, low cab, aux valve, 2891 hours, govt. hours, U8604 ......$189,000 long reach, 1663 hours, Sweeps, Semi U w/tilt, long reach, 2158 hours, U9474 ................$149,000 warranty, U9751..$219,000 tractor, U9632 ......$99,000 U9985 ..................$69,000

ERB EQUIPMENT CO., INC. Sales, Rental, Parts & Services Of: John Deere, Liebherr, Bomag, NPK & Trail King

Call Industrial Sales At (636) 349-0200 Toll Free (866) 372-7368 Email: Mattheisel@erbequipment.com

VIEW COMPLETE INVENTORY (OVER 300 UNITS)

8 Locations To Serve You Fenton, MO Wentzville, MO

Mt. Vernon, IL Cape Girardeau, MO

Paducah, KY Cuba, MO

Owensboro, KY Evansville, IN

Page 12 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARE YOUR CREWS TRAINED ACCORDING TO OSHA STANDARDS TO WORK SAFELY IN THE TRENCHES? Location

Februar y

Asheville, NC Athens, GA Location Atlanta, GA VA* Alexandria, Augusta, GA MD* Annapolis, Baltimore, MD* Asheville, NC Blacksburg, Baltimore,VAMD* Boone, NC Blacksburg, VA Boone, Bristol, TNNC Bowie, MD* Charleston, SC Charleston, Charlotte, NC SC Charlottesville, Charlotte, NCVA Columbia, SC Charlottesville, VA Fayetteville, NC Columbia, SC Frederick, MD Cumberland. MD Greensboro, NC VA Falls Church, Greenville, NC NC Fayetteville, Greenville, SCMD Frederick,

X X November x02/10/10 TE/CS xX x02/24/10 TE/CS xX xX xX x02/04/10 TE/CS 08/06/07 02/11/10 TTE E/CS 02/23/10 TTE E/CS 08/23/07 02/05/10 TE/CS x X x xX x02/12/10 TE/CS xX x02/02/10 TE/CS

March

Fredericksburg, VA*

X X December x 03/10/10 TE/CS x X x 03/24/10 TE/CS x 03/19/10 TE/CS 03/05/TE 10 TE/CS 09/26/07 x X x 03/04/10 TE/CS 09/04/07 03/11/TE 10 TE/CS 09/19/07 CS X 09/20/07 TE X 09/11/07 TE X 09/18/07 TE x X x 03/11/10 TE/CS x 03/17/10 TE/CS x 03/02/10 TE/CS x 03/30/10 TE/CS x 03/23/10 TE/CS x X x X 09/27/07 03/09/TE 10 TE/CS x X x X x 03/25/10 TE/CS x 03/03/10 TE/CS 09/10/07 TE 0 3/31/TE 10 TE/CS 09/05/07 x X 03/16/TE 10 TE/CS 09/12/07 03/18/10 TE/CS 09/06/07 TE 03/26/10 TE/CS X 09/13/07 TE X x X x X x X x X

x xX xX 08/22/07 TE X 08/21/07 02/09/T0 TTE E/CS 08/28/07 TE X xX x02/25/10 TE/CS 08/02/07 TE 02/03/10 TE/CS Manassas, VA 08/13/07 TE Myrtle Beach, SC 08/07/07 TE X Newport News, VA VA Newport News, 08/15/07 TE Norfolk, VA Norfolk, VA x02/16/10 TE/CS 02/18/10 TCS E/CS Raleigh, NC 08/08/07 Raleigh, NC 02/26/10 TTE E/CS Richmond, VA 08/09/07 08/14/07 02/19/10 TTE E/CS Roanoke, VA Richmond, VA 08/16/07 CS X Savannah, GA Roanoke, 08/29/07 TE X Staunton, VA VA Staunton, 08/01/07 TE X Suffolk, VA VA Suffolk, VA VA xX Virginia Beach, Virginia Beach, VA x02/17/10 TE/CS Wilmington, NC Wilmington, NC x x TE=Trench CSCS= Training, =Confined Space Training, TE= Trench&&Excavation Excavation Training, Confined Space Training, SP=Spanish andx X==No Class SP= SpanishTraining TrainingClass Class, No Class Hagerstown, MD MD Gaithersburg, Greenville, NC Harrisonburg, VA Greenville,NC SC Jacksonville, Greensboro, Knoxville, TN NC Harrisonburg, Laurinburg, NC VA Jacksonville, Lynchburg, VA NC Knoxville, TN Manassas, VA Lynchburg, VA Myrtle Beach, SC

SEMINAR Topics: • Intro to Trench & Excavation Safety • The OSHA Excavation Standard • Protective Systems • Soil Mechanics & Analysis • Job Planning Requirement Overview

the authority in underground equipment and training rentals

sales

supplies

training

Greensboro, NC 1.866.587.3624

DC/Northern VA 1.888.387.3624

Greenville, SC 1.866.957.3624

Atlanta, GA 1.877.587.3624

Norfolk, VA 1.866.887.3630

Knoxville, TN 1.866.999.8344

Charlotte, NC 1.877.587.3624

Baltimore, MD 1.866.951.0809

Birmingham, AL 1.877.587.3624

Raleigh, NC 1.888.587.3624

Myrtle Beach, SC 1.866.586.9404

Jacksonville, FL 1.866.957.3624

Richmond, VA 1.866.887.3630

Charleston, SC 1.866.957.3624

www.CobleTrenchSafety.com

Transportation Secretary Announces $94M for Federal Lands Road Projects Sixty-eight road projects in 31 states will receive $93.9 million in Public Lands Highways grant funds to improve access to public lands, U.S. Secretary of Transportation Ray LaHood announced Jan. 13. “The roads that carry America to and through its national parks, tribal lands or any of the other federal lands need help, just like the rest of the national highway system,” said LaHood. “These funds will help protect the roads for the many who depend on them and improve the quality of life for communities served by these unique places.” The funds will improve and increase accessibility on the lands of 15 Native American tribes, 11 military bases, 19 national park units, 10 national forests and four national wildlife refuges. Unlike most of the nation’s public roads, which are managed by state

departments of transportation, federal lands roads are maintained by various tribal and federal agencies. Funds from the Public Lands Highways grant program supplement their existing infrastructure programs. They also can be used for cities and counties that are responsible for the roads providing access to federal and tribal lands. Examples of this year’s grant recipients include: • More than $4 million will be used to help improve road access to the Flight 93 National Memorial in Stonycreek Township, Pa. • Nearly $3 million will be used for road improvements near the forthcoming American Veterans Disabled For Life Memorial in Washington, D.C., between I-395 and the U.S. Capitol. The memorial is anticipated to be completed by 2012. • Nearly $2 million will be used to make tribal road improvements on the

HAROLD HOWELL Construction Equipment Co. 1996 CATERPILLAR MODEL 12-H MOTOR GRADER Serial #4XM00756, 1996,14' Moldboard, Open Cab, Scarifier, 7352 Hours, 17.5 – 25 tires. Good - Clean - Strong Machine SPECIAL PRICE: F.O.B. West Palm Beach, Florida ............$79,500 CATERPILLAR MODEL D5M LGP CRAWLER DOZER Serial #3CR00370, 1997, 60% + undercarriage, 30” pads, Open ROPS, excellent powertrain, good looking, clean, straight dozer SPECIAL PRICE WAS: F.O.B. West Palm Beach, Florida ..$45,000 REDUCED PRICE TO $29,500 1995 CATERPILLAR 938F FRONT END LOADER Serial #1KM1001, 1995, enclosed cab, large-wide 550/65 R25 tires, cranked and ran without assist, power train good – forward/back good, pins and bushings good, good brakes. REDUCED PRICE ......$38,500

Call Harold Howell at 561-744-5091 Email: hh@haroldhowell.com www.haroldhowell.com

Standing Rock Sioux reservation in North Dakota. • Nearly $1 million will be used for alternative transportation improvements around the Fort Baker area in the Golden Gate National Recreation Area in California. This work includes pedestrian connection improvements, upgrades to National Park Service shuttle buses, planning for bio-diesel refueling capacity, and installation of signs, bicycle racks, benches and other related equipment. • More than $1 million will be used to complete construction of the SR 101/t3ba’das Parkway on the Skokomish Indian Reservation, Washington. This is the largest amount of grant funding awarded to public lands roads since 2002, and the second largest in the 79-year history of the Federal Highway Administration’s Public Lands Highways program.

Georgia Highways Benefit From $75M in Stimulus Cash ATLANTA (AP) Some $75 million in federal stimulus dollars have been awarded to road widening and resurfacing projects throughout Georgia. State Transportation Commissioner Vance Smith said 72 projects have received the cash. Smith said with the new projects awarded in December, the Georgia Department of Transportation has now funded more than 200 stimulus projects valued at nearly $600 million.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 13

QUALITY USED BOBCAT EQUIPMENT COMPACT TRACK LOADERS 2001 Bobcat 331, 1620 hours ............ ..............................................$15,500

2005 Bobcat 331, 787 hours .............. ..............................................$17,900

2007 Bobcat T140, 330 hours, s/n 11011........................................................................................................................$24,900 2003 Bobcat T190, 3312 hours, s/n 15610......................................................................................................................$$13,900 2007 Bobcat T190, 695 hours, s/n 12454 ...................................................................................................................... $25,900 2007 Bobcat T190, 1100 hours, cab, heat, air, wide track, combo bucket, keyless, s/n 18068 ..........................................$$22,900 2004 Bobcat T250, 1700 hours, s/n 12623......................................................................................................................$$17,900 2004 Bobcat T250, 1950 hours, s/n 12068......................................................................................................................$$16,900 2007 Bobcat T300, 780 hours, s/n 12654........................................................................................................................$$28,900

COMPACT EXCAVATORS 2004 Bobcat S250 with 24” hi flow planer, 1100 hours..................$27,900

2007 Bobcat T300, sjc controls, keyless, 775 hours........................$27,500

1998 Bobcat 331, 1640 hours, s/n 15752........................................................................................................................$$12,900 2007 Bobcat 329, 266 hours, s/n 11054..........................................................................................................................$$27,500 2007 Bobcat 331, 725 hours, s/n 13954..........................................................................................................................$$23,900 2007 Bobcat 337, 675 hours, s/n 13765..........................................................................................................................$$41,900 2004 Bobcat 341, 1950 hours, s/n 12651........................................................................................................................$$26,500 2007 Bobcat 435, 400 hours, s/n 12709..........................................................................................................................$$34,900

SKID-STEER LOADERS

2008 Bobcat T300, acs controls, keyless, 730 hours........................$28,500

2007 Bobcat T300, cab, heat, air, keyless, power bobtach, combo bucket, 190 hours ..............................$38,500

2007 Bobcat S175, 410 hours, factory warranty, s/n 15797 ............................................................................................$$18,500 2008 Bobcat S175, 280 hours, factory warranty, s/n 17412 ............................................................................................$$19,500 2007 Bobcat S185, 155 hours, s/n 19342 ......................................................................................................................$$18,900 2008 Bobcat S250, 360 hours, factory warranty, s/n 17057 ............................................................................................$$26,900 2007 Bobcat S300, 1100 hours, factory warranty, s/n 13572 ..........................................................................................$$21,900

For Your Best Deal Call Steve Thigpen

704-201-3917 • bobcat@rsbraswell.com BOBCAT OF CHARLOTTE • BOBCAT OF MONROE • R.S. BRASWELL COMPANY, INC.

Page 14 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AEM Leader Urges T A U.S. Senate to Invest O B H S U P in Infrastructure INFRASTRUCTURE from page 1

New never used 2009 push boat with two 115HP total 230 HP Evenrude engines, 24’x8’x3’ constructed of A36 1/4 steel. Includes New tri axle trailer. $48,000

including — in addition to Reid, Stabenow and Murray — Senator Barbara Boxer (D-CA), chair of the Senate Environment and Public Works Committee, which has jurisdiction over the federal surface transportation and water infrastructure programs. Also attending were leaders of business and labor organizations, local and state government officials, and representatives of the rural, education and minority business communities. At the press conference, Slater spoke alongside Senators Boxer and Bob Casey (D-PA) and two representatives of national labor organizations. Slater stated, “What we heard today was not only a commitment to a near-term jobs creation package, but a commitment from Senator Boxer to write a multi-year highway bill this year, and to start that process in March. We fully support this commitment and look forward to working with Senator Boxer and her colleagues as they write this critical legislation.” He added, “We know many thorny policy issues have to be resolved before the House and Senate can come to agreement on a new multi-year highway bill, and that in the meantime — right now — Congress needs to pass some measures that can help to create jobs for Americans in the nearer term. We respect and support this. But as soon as that work is done, we hope that our lawmakers will turn to our nation’s long-term infrastructure investment needs. We must have a multi-year funding commitment to provide market certainty, so planners can plan, and business can invest. This is how the private sector creates jobs.”

A Hard Number Look at the Need for Infrastructure Investment Dennis Slater, president of the Association of Equipment Manufacturers recently spoke before a meeting of senators about the state of the construction industry. He had the following to report: • 1.25 million. That’s how many jobs the construction equipment industry supported in 2008. • 550,000. That’s how many jobs the construction equipment industry has lost in this recession. • 50 percent. That’s how much employment in the construction equipment manufacturing sector alone has declined since 2006. • 22,000 deaths annually are related to deficient roadway conditions. • Commuters in major urban areas waste 4.2 billion hours every year stuck in traffic — costing another $87 billion to the economy in lost productivity and wasted fuel. • At least 33 percent of our nation’s major roads are in poor or mediocre condition and 26 percent of bridges are structurally deficient or functionally obsolete. • $225 billion. According to the Surface Transportation Policy and Revenue Study Commission, the U.S. needs to spend $225 billion annually for the next 50 years to upgrade our surface transportation system. We are spending less than 40 percent of this amount today. • $350. That’s how much wealth is returned to the economy for every $100 invested in infrastructure, according to a University of Maryland study. • 35,000. According to the Department of Labor, 35,000 jobs are created for every $1 billion spent on infrastructure.

E P Crews Employ Cranes to Install Bolts I P E G D DRE on Crumbling Rock Face Along U.S. 64 TDOT from page 1

3000 feet of Barley used 18” 17SDR pipe 40’ and 50’ sections, Used 18”x40’ rubber line for dredge, and 2000 feet of New 12” 17SDR pipe capped on both ends.

(973) 725-0334

A $2.1 million emergency contract was awarded to Charles Blalock & Sons of Sevierville and highway officials had said after the Nov. 10 slide that the cleanup would take at least two months. According to TDOT’s Web site, by the end of January crews were assembling a new 150-ton crane to be used to install the bolts along the rock face. Approximately 200 bolts, with a 2-in. (5 cm) diameter, ranging from 10 to 25 ft. (3 to 7.6 m) long will be driven into the mountainside. The contractor was planning to remove debris that was generated by recent blasting from the roadway so that a crane pad could be constructed for the new crane. TDOT Commissioner Gerald Nicely said in a statement that the slide has been a major inconvenience for residents of Copperhill and Ducktown and everything is being done to get the highway reopened as quickly as possible.

Smaller cranes on site are being used for a variety of jobs, including lifting and turning the delivery trucks around because there is no space on the site for the trucks to turn.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 15

Contact: Tel: Fax: Email:

Walt Kay 540/309-1709 540/389-6507 walter.kay@RSCrental.com

RSC Equipment Rental SCISSORS

C O M PA C T I O N

2004 GENIE GS1930, SCISSOR LIFT-15-19' DC, S/N GS300465147, UNIT #509416........................................$3,800 2004 JLG 2030ES, SCISSOR LIFT-20' DC-30-34", S/N 0200122797, UNIT #519485....................................$4,130 2004 SKYJACK SJIII-3226, SCISSOR LIFT-26' DC-30-32", S/N 272214, UNIT #515905 ..................................................$5,371 2004 JLG 2646ES, SCISSOR LIFT-25-26' DC-46-68", S/N 0200122777, UNIT #516754 ..........................................$6,050 2005 SKYJACK SJIII-4632, SCISSOR LIFT-30-34' DC-46-69", S/N 711485, UNIT #541377..........................................$11,192

2004 MULTIQUIP MRH800GS, W/B ROLLER-SMOOTH-DD1500# 26", S/N M3646, UNIT #509442 ..........................$3,806 2005 WACKER RT56-SC, W/B ROLLER-PADFOOT-3000#, S/N 5569442, UNIT #565640 ................................................$9,201 2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000#, S/N 5549433, UNIT #548636................................................$10,640 2005 IR SD45D-COMBO, R/O ROLLER-VIB-SD 5T 54” S/N 182289, UNIT #555319..................................................$23,866 2005 IR SD70D, R/O ROLLER-VIB-SD 8T 66” S/N 182142, UNIT #557622 ..............................................................$32,404

BOOM LIFTS

FORKLIFTS

G E N E R AT O R S 2005 MULTIQUIP DCA10SPX3, GENERATOR-10-14 KW, S/N 3763449, UNIT #584432 ................................................$5,192 2004 MULTIQUIP DCA45USIC, GENERATOR-30-39 KW, S/N 8200424, UNIT #529066 ................................................$5,764

2005 DAEWOO G25E-NM, IND FORKLIFT-5000 LB, S/N GA00397, UNIT #551736..............................................$10,795 2004 DAEWOO D35S, IND FORKLIFT-8000-9000 LB, S/N FZ00026, UNIT #513074 ..............................................$16,380 2004 GEHL RS5, RCH FORKLIFT-6000 LB 20-34', S/N RS5JV0311221, UNIT#494403 ....................................$20,670 2005 TEREX TX55-19, RCH FORKLIFT-FXD-5000 LB 18-24', S/N TX551911553, UNIT #552263 ..............................$21,413 2003 JLG G9-43A, RCH FORKLIFT-9,000 LB 35-45', S/N 0160002173, UNIT #473963..................................$21,843 2004 GEHL RS6, RCH FORKLIFT-6000 LB 35-39',S/N RS6JV0213064, UNIT #489226....................................$24,335 2004 LULL 644E-42, RCH FORKLIFT-6000 LB 40-45', S/N 0160003168, UNIT #484162 ........................................$25,350 2002 LULL 844C-42, RCH FORKLIFT-8000 LB 35-45', S/N 16161, UNIT #412448 ..................................................$27,264 2004 SKYTRAK 10054, RCH FORKLIFT-10000 LB 40-55, S/N 0160004344, UNIT #508084 ........................................$47,501

2005 BOBCAT S220, SKIDSTEER LOADER-1851-2200 LB, S/N 526215460, UNIT #590851 ........ .................................... $17,034

2004 DEERE 550H-LT CRAWLER DOZER, 75-84HP-STD TRACK, S/N T0550HX937358, UNIT $37,026 #512419........................$

2005 WACKER RT82-SC, W/B ROLLER-PADFOOT-3000#, S/N 5593138, UNIT #581593............ $10,640 ......................................$

2004 DEERE 710G BACKHOE4WD 23’ EXT, S/N T0710GX941793, UNIT #531117 $58,068 ....................................$

2004 JLG G9-43A, RCH FORKLIFT-9000 LB 35-45', S/N 0160003850, UNIT #505796 ...... $27,769 ......................................$

e rv ic

What goes around comes around.

ic e s s e rvi ce s erv s e ss rv

The best measure of a crane company is how they stand behind their promises ... to their customers, their suppliers, and their manufacturers. At ALL, we stand behind every piece of equipment with timely support, service, and parts. We continually invest in our people, our ﬂeet of equipment, and training. And with branches throughout North America, we’re there when you need us. Because that’s what you expect from a leader.

ce s

1999 GENIE Z45/25-DF-4WD, ART BOOM LIFT-45-49'-4WD, S/N Z452511256, UNIT #286953..................................$17,565 1998 JLG 601S-D-4WD, STR BOOM LIFT-60-64'-4WD, S/N 0300037612, UNIT#248700..........................................$19,703 2005 JLG E300AJ-NAR, ART BOOM LIFT-30-34'-2WD DC, S/N 0300087886, UNIT #581382 ........................................$21,709 2002 TEREX TB85-D-4WD, STR BOOM LIFT-85-89'-4WD, S/N 2660012, UNIT #7602108 ............................................$23,731 2005 JLG E400AN-NAR, ART BOOM LIFT-40-44'-2WD DC, S/N 0300081644, UNIT #541391 ........................................$26,082 2002 GENIE S85-DF-4WD, STR BOOM LIFT-85-89'-4WD, S/N S853354, UNIT #439174 ..............................................$35,897

540/309-1709

We have a yard nearby. Call 800-232-4100 or go to:

www.allcrane.com/Locations.aspx © ALL Erection & Crane Rental Corp., an Equal Opportunity Employer

Page 16 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Beasley Forest Products, Inc. P O Box 788 Hazlehurst, GA 31539

Crane Mats & Skids BFP Builds Quality Mats Produces over 200 mats per day End Coating to prevent splitting and checking Place stacking sticks between mats to allow drying and prevent decay Minimal Wane Consistent 48” wide mats; no random widths

We can truck or rail crane mats anywhere in the United States.

BFP Logo stamped into each bold head Maintains large inventory of mats

Phone (912) 375-5174 Fax (912) 375-9541 Email: bfp9541@bellsouth.net

www.beasleyforestproducts.com

Fundamental Fixes Equal Less Spending, Longer Tool Life Today’s economic realities now demand using every trick of the trade in order to make equipment last longer while squeezing every excess expense – including constantly purchasing new tools – out of the balance sheet. Jerry R. Fifer, technical support manager southeast of Tramac said maintenance gaffes that cost companies both in tool wear and big money for replacements come down to four basics: • All grease is the same, right? The Fault: Breaker tools or points become extremely hot (as high as 400 F or more) when in use. At those temperatures, standard lube grease will liquefy and run off the tool or actually burn up entirely, leaving a shorter lifespan for tools’bushings and broken tools. The Fix: Good grease. Breaker grease should be, at minimum, No. 2 lithium-based grease containing 3 percent molybdenum. It should be rated to work at temperatures of at least 500 F or more). Why is the molybdenum a “must have”? It helps the grease stick to the tool and not run off.

• Where do I grease it? The Fault: Failing to put enough grease on and applying it in the wrong way can be just as bad as using low-quality product. The Fix: Start with a quick examination. When the breaker is raised vertically off the ground, the tool will drop down and expose the portion that is in contact with the lower tool bushing. The condition of this exposed portion is indicative of the condition of the upper, unexposed sections. The exposed portion should be thoroughly covered with grease. But how to apply it? Use an automatic greaser (if available) and set it to apply grease only when the breaker is operating. If the automatic greaser runs while the breaker tool has dropped down (see above) grease will be deposited on the top of the tool. Then the next time the breaker is used the grease (now trapped between the top of the breaker tool and the bottom of the strike piston) will be forced through the lower piston seals and damage them. If applying lubricant manually, the tool must be pushed upward into the breaker before greasing. This is easy to do by

lowering the breaker vertically and pressing the tool against the ground. The bottom line: using the proper amount of high-quality grease and putting it on in the right way greatly reduces the friction wear on the tool and tool bushings. • When is it time to inspect? The Fault: Tool tops not checked regularly lead to more damage overall. The Fix: The top of the tool takes a tremendous beating from the strike piston. Eventually, the tool top’s surface will mushroom just like the top of a mechanic’s cold chisel or punch. It is important that the mushrooming areas be filed off before they become so large that they break off. Broken pieces of the tool can get trapped between the tool and the strike piston, resulting in piston damage. Also be sure to check for damage on the areas of the tool that strike the tool retainers. Any mushrooming or other faults must be filed off at regularly. An important reminder: different types of breaker applications will result in more or less tool damage. Inspect and service the tool once a week until experience teaches you

how long your service intervals can be. • When do I replace the bushings? The Fault: Wear limits on bushings are routinely misjudged, resulting in piston damage and shortened lifespan on other parts. The Fix: All breaker tool bushings have a specified inner diameter wear limit. When this limit is reached, most bushings appear to have plenty of material left to wear off and are usually not replaced as recommended. But the key is to remember that the wear limit is not based on how much material is left but on the possible angle of engagement between the tool and strike piston. The lower bushing will be the first to wear out. If it is allowed to wear past the limit, the tool can be at such an angle to the piston that the piston only hits the tool on the edge of the strike surface. Continuing to operate the breaker in this way will damage the strike piston. In addition, wear on the upper bushing is accelerated when the lower bushing is worn out. The lifespan of the upper bushing can be extended by replacing the lower bushing when the wear limit is reached.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 17

Page 18 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Manufacturers Expand Contacts by Connecting With Equipment Dealers AED from page 10

Bill Brenoel (L), regional sales manager and Mark Kulyk, president, Rogers Brothers Corp., Albion, Pa., take time to relax during the show.

AED provides a forum for manufacturers looking to expand their distribution network to make contact with equipment dealers who are open to handling new lines of construction equipment. After the rally, a parade of disused equipment, left idle by the downturn in the industry, rode through the streets of San Antonio.

The 2010 AED Summit included a rally to bring the plight of the construction industry in Texas, as well as the rest of the United States, to the attention of Congress.

Don Etnyre (L), vice president of sales, and Kelly Durham, regional manager, get ready to greet visitors to the E.D. Etnyre, Oregon, Ill., booth.

Magnum Attachments, Etobicoke, Ontario, Canada, representatives Tony Kaiser (L) and Robert Grisson were well prepared to answer questions about their products.

Standing in front of a Hydrema 912 HM articulated truck (L-R) are Kris Binder, executive vice president; Kevin O'Donnell, national sales manager; and Jan Werner Jensen, CEO; all of Hydrema US Inc., Roswell, Ga.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 19

Page 20 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

STAFFORD

COWIN EQUIPMENT COMPANY, INC. Birmingham, AL 205/841-6666 • 800/239-2694 Fax: 205/849-0853 Mobile, AL 251/633-4020 • 800/223-6755 Fax: 251/639-0461 Madison, AL 256/350-0006

Montgomery, AL 334/262-6642 • 800/239-6642 Fax: 334/834-2272 Huntsville, AL 2 5 6 / 5 3 6 - 9 3 90 • 8 0 0 / 2 3 9 - 7 3 6 8 Fax: 256/355-5250 Oxford, AL 256/832-5053 • 800/917-7931 Fax: 256/831-4295

Pensacola, FL 8 5 0 / 4 7 9 - 3 0 0 4 • 8 00 / 2 3 9 - 4 7 3 6 Fax: 850/474-1602 Atlanta, GA 404/696-7210 • 800/849-3540 Fax: 404/699-1250 Albany, GA 2 2 9 / 8 8 8 - 6 2 4 7 • 8 0 0 / 9 6 9 -6 2 8 7 Fax: 229/888-9062

www.staffordequipment.com

Charlotte, NC 704/333-0786 • 800/687-1672 Raleigh, NC 919/657-0070 • 800/687-1672 West Columbia, SC 803/796-4060 • 800/687-1672 Valdosta, GA 229/247-4495 • 800/283-2576

Tifton, GA 229/382-4400 • 800/255-4401 Douglas, GA 912/384-4400 • 800/559-4019 Ashland, VA 804/798-4500 • 888/285-6200 Roanoke, VA 540/992-4650 • 800/992-4650

INTERSTATE EQUIPMENT CO.

P.O. Box 868 Statesville, NC 704/873-9048

www.interstateco.com West Columbia, SC

803/794-7400

Raleigh, NC 919/467-1801

SE Equipment Inc. Expands With Two New Dealerships

Mike Gardiner has joined the sales team at the new Bobcat of Charleston location.

By Jennifer Hetrick CEG CORRESPONDENT

SE Equipment Inc. recently expanded into two new areas, bringing the number of Bobcat dealerships in the group up from three to five. Bobcat of Charleston, S.C.’s new location

The Bobcat of Charleston, which is now under the management of Todd Owens.

is being managed by Todd Owens and will have three new employees, David Adams in parts, Mike Gardiner in sales and Martin Moran in field service. SE Equipment Inc. also added Bobcat of Savannah, Ga., to the organization. Steve Duncan, who had worked at SE’s Greenville location since 2005, has relocated to Savannah to lead that

branch. According to John Hopper, general manager, SE Equipment, the decision to expand in difficult times was really a matter of keeping to the company’s standards. “While the economy is tough it brings about opportunity and our strategy hasn’t changed. We still want to acquire Bobcat stores in a contigu-

The new Bobcat of Charleston welcomed new employee David Adams, parts department.

ous territory to allow us to better serve our customers,” Hopper said. The expansion, continued Hopper, “provides a consistent experience for our customers. We offer the highest level of service and by being able to operate anywhere in the region, we are able to have our customers see BOBCAT page 42

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 21

Page 22 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Southland Surmounts Sodden Soil for Road, Bridge Work SOUTHLAND from page 1

for the bidding information showed wetlands but, based on borings, didn’t indicate standing water. ”We’re basically building the job in the middle of a lake.” They didn’t have an approved erosion-control plan, just a generic plan, when they were given the job, he said. They hadn’t yet physically gone through the wetlands when they submitted the plan for a general notice of intent. “We have had to work with the DOT and water management district on developing a plan to work through the standing water,” Eliason said. “These conditions require daily monitoring of the site conditions and construction process to determine if any adjustments or corrections to the proposed plan are needed.” There are creeks and lakes all around the project, and turbidity is an ongoing concern, requiring daily monitoring, he said. The plan includes isolating the job with berms and then coming back to remove the trapped water so they can build to grade, Eliason said. The two-lane overpass is being constructed about 700 ft. (213 m) south of the existing roadway and will have 12-ft. (3.6 m) travel lanes and 10-ft. (3 m) shoulders, according to FDOT. The road will tie back into Fla. 26 about three-quarters of a mi. east and west of the existing intersection, with connector roads being constructed to access the current at-grade intersection and local businesses, Eliason said. The scope of the contract includes approximately 450,000 cu. yds. (344,049 cu. m) of embankment, 71,600 sq. yds. (59,866 sq. m) stabilization, 52,000 sq. yds. (43,478 sq. m) of base, the construction of a new storm drainage system and box culvert as well as the new bridge, he said. Track excavators, bulldozers, wheel loaders, vibratory rollers, motorgraders, cranes and a rubbertire hoe are working on the job, Eliason said. It’s a mixture of owned and rented equipment, he said. The motorgraders are all Caterpillars, and all the excavators

in the company except for a Hitachi 450 are Komatsus, Eliason said. Most of the dozers are John Deeres, including a John Deere 750 dozer being used to push fill and a John Deere 650 dozer being used to do fine grading on the embankment. “We’ve got a lot of embankment on the project,” he said, noting the company hopes to have all the embankment in place by the time the rainy season rolls around again, usually July. The company will be renting a

A Komatsu PC 400 excavator toiling in the unexpectedly wet soil at the project site.

Approximately 400,000 cu. yds. (305,821 cu m) of fill is being imported from surrounding fill sources to augment the approximately 50,000 cu. yd. (38,228 cu m) of fill on site from the pond construction.

“Southland was attracted to the balanced mix of roadwork and bridge construction in the scope. We believe that our roadwork and pipe experience is second to none, and this project also allowed us to continue to develop our burgeoning bridge division.” Eric Eliason Southland Construction Inc.

crane, but the deal hasn’t been finalized, Eliason said. Southland currently services most of its equipment in-house, but Neff Rental and Linder Industrial Machinery Company handle the service on the company’s newer equipment and rentals, he said. The project will involve a substantial amount of borrow.

“We are importing approximately 400,000 cubic yards of fill from surrounding fill sources,“ Eliason said. “We will have approximately 50,000 cubic yards of fill on site from the pond construction.” The job will entail nearly 1,100 cu. yds. (841 cu m) of concrete and 12,000 tons (10,886 t) of asphalt, he said.

The concrete bridge will require 787.30 cu. yds. (601.89 cu m) of concrete, with the box culvert having 300 cu. yds. (229 cu m) of concrete, Eliason said. As for the asphalt, the project calls for 7,400 tons (6,713 t) for structural and 4,600 tons (4,173 t) for friction, he said. The project will entail the use of two pipe crews, two earthwork crews, two grade crews and a bridge crew, Eliason said. “These crews will be phased in and off the project, so the project will probably maintain a level of around 20 employees on any given day,” he said. “Currently, our schedule only necessitates daytime work Monday through Friday.” Subcontractors working on the project include Ed Smith Construction Company of Atlanta, box culvert; Steven Counts Inc. of Ocala, Fla., asphalt base, structural paving and friction; JVD Construction Inc. of Altamonte Springs, Fla., barrier wall; Infinity Reinforcing Inc. of Palm Coast, Fla., rebar; RES Construction of Orlando, MSE wall; W&S, shoulder gutter; Belcorp Inc., sod; Geotechnical Foundations, pile driving; A-1 Sod, erosion control; Protection Services Inc., traffic management; and PSI, quality control. The project isn’t adding much to the traffic headaches at the intersection beyond some minor lane closures on U.S. 301 to accommodate the bridge construction, Eliason said. “Most of the project is outside of

the existing roadway footprint,“ he said. “We will have minor traffic reconfigurations and detours when we tie in the road in the final project phases.“ The job is on the eastern edge of Alachua County, roughly a dozen miles from Gainesville, Fla., where it is called University Avenue, Eliason said. “State Road 26 is a major eastwest artery for Gainesville,” he said, “and traffic tends to build up at the intersection during commuting hours in the morning and afternoon … The project is also going to alleviate some of the safety issues concerning the junction of these two major roadways and the railroad in a relatively rural area.” According to FDOT, more than 9,500 vehicles travel daily on Fla. 26 and more than 11,000 travel daily on U.S. 301. And the numbers increase during University of Florida home football games when fans travel to the school on those roads. Meanwhile, rail traffic is forecast to increase substantially on the line, meaning more trains to back up Fla. 26 traffic waiting to cross the tracks, Eliason said. It also could mean more dangerous situations for Fla. 26 traffic backed up at the tracks waiting to travel through the U.S. 301 intersection, he said, noting that the overpass will thin Fla. 26 traffic through the intersection and thus improve safety there. Southland was attracted to the low-bid contract for several reasons, Eliason said. “The project was an opportunity to expand our region to DOT District 2, said Eliason, noting the company did work in District 2 several years ago but has not had a large presence in the District recently. “Southland was attracted to the balanced mix of roadwork and bridge construction in the scope,” he said. “We believe that our roadwork and pipe experience is second to none, and this project also allowed us to continue to develop our burgeoning bridge division.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 23

FLINT EQUIPMENT COMPANY Albany, GA 229/888-1212 Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688

STAFFORD Ashland, VA 804/798-4500 Roanoke, VA 540/992-4650

TRACTOR & EQUIPMENT CO. Alabaster, AL 205/621-2489 Anniston, AL 256/831-2440 Birmingham, AL 205/591-2131 Decatur, AL 256/355-0305 Dothan, AL 334/678-1832 Grove Hill, AL 334/275-4158 Mobile, AL 251/457-8991 Montgomery, AL 334/288-6580 Shoals Area, AL 256/383-5666 Tuscaloosa, AL 205/752-0621 Panama City, FL 850/763-4654 Pensacola, FL 850/505-0550

A firm believer in strong foundations Are you responsible for meeting tight deadlines without compromising on quality? At Dynapac, we put all our knowledge and many years of experience into the making of high performance compaction and concrete equipment. We offer an extensive range of large and small construction equipment that are user friendly, rugged and flexible to your needs. We stand behind you all the way with service and spare parts to ensure your project runs smoothly. Check with us first, when you need heavy duty compaction and concrete equipment that won’t let you down.

www.dynapac.com

Page 24 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CALL ree Toll F

-2200 3 2 5 800 7 9 Ext. 1

Caterpillar 797F Off-Highway Truck, 1:50 Scale ....................................................$250

Oshkosh Front Discharge Mixer Truck, 1:34 scale ............................................................$70

Caterpillar 977 Traxcavator, 1:50 Scale ........................................................$25

Bobcat Tractor/Trailer Set, 1:50 Scale ............................................................$80

All New in Box Allis-Chalmers HD41 Crawler Dozer, 1:25 Scale ..............................................................$190 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ..................................................................$80 Bantam C-35 Crawler Backhoe, 1:50 Scale ........................................................................$70 Bell B40D Articulated Truck, 1:50 Scale..............................................................................$50 Bobcat A300 Wheel Loader, 1:25 Scale ..............................................................................$55 Bobcat S175 Skid Steer Loader, 1:50 Scale ........................................................................$18 Bobcat M610 Golden 50th Anniversary Skid Steer Loaer ..................................................$50 Bobcat Tractor/Trailer Set, 1:50 Scale ................................................................................$80 Caterpillar No. 12 Motor Grader, 1:87 Scale ......................................................................$25 Caterpillar 140H Motor Grader w/ripper & scarifier, 1:50 Scale ........................................$40 Caterpillar CS-563 Soil Compactor, 1:87 Scale ..................................................................$25 Caterpillar 825 Soil Compactor, 1:50 Scale ........................................................................$35 Caterpillar 420E Backhoe/Loader, 1:50 Scale ....................................................................$45 Caterpillar D6K XL Track Type Tractor, 1:50 Scale..............................................................$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ................................................................$75 Caterpillar D11R Track Type Tractor, 1:50 Scale ................................................................$45 Caterpillar D11T Track Type Tractor, 1:50 Scale ................................................................$70 Caterpillar 950H Wheel Loader, 1:50 Scale ........................................................................$45 Caterpillar 980G Wheel Loader, 1:50 Scale ........................................................................$35 Caterpillar 992 Wheel Loader, 1:50 Scale ..........................................................................$50 Caterpillar 994F Wheel Loader, 1:50 Scale ........................................................................$95 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale ..................................................$30 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale....................................................$40 Caterpillar D5G XL Track Type Tractor, 1:50 Scale ............................................................$55 Caterpillar D8R Track Type Tractor, 1:50 Scale ..................................................................$40 Caterpillar Vintage Twenty Tractor w/metal tracks, 1:16 Scale..........................................$70 Caterpillar 302.5 Mini-Excavator, 1:32 Scale......................................................................$30 Caterpillar 320C Excavator, 1:50 Scale ..............................................................................$35 Caterpillar 330D L Excavator, 1:50 Scale............................................................................$70 Caterpillar 511 OB Excavator, 1:50 Scale............................................................................$65 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ..........................................................$30 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale ....................................................$40 Caterpillar 365C L Front Shovel, 1:50 w/metal tracks............................................................$70 Caterpillar 963D Track Loader, 1:50 Scale ..............................................................................$45 Caterpillar 977 Traxcavator, 1:50 Scale ..............................................................................$25 Caterpillar 611 Motor Scraper in display case, 1:64 Scale ................................................$25 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale ......................................................$45 Caterpillar 725D Articulated Truck, 1:50 Scale ..................................................................$30 Caterpillar 775E Off-Highway Truck in display case, 1:64 Scale........................................$25

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Caterpillar 777D Off-Highway Truck, 1:50 Scale ................................................................$40 Caterpillar "O" Gauge Complete Train Set ............................................................................$190 Hitachi LX70 Wheel Loader, 1:40 Scale ..............................................................................$65 International TD-24 Military Dozer, 1:50 Scale ..................................................................$50 JCB 3CX Backhoe Loader, 1:50 Scale..................................................................................$50 JCB 456 Loader Waste Master, 1:50 Scale ........................................................................$60 JCB 456 ZX Wheel Loader, 1:50 Scale ................................................................................$65 JCB Vibromax VM 115 Soil Compactor, 1:50 Scale ............................................................$45 John Deere 320 Skid Steer Loader, 1:16 Scale ..................................................................$45 John Deere 850J Dozer, 1:50 Scale ....................................................................................$40 Komatsu 960E Mining Truck, 1:50 Scale ..........................................................................$275 Komatsu PC300LC-8 Excavator, 1:50 Scale ........................................................................$70 Komatsu WA500-6 Wheel Loader, 1:50 Scale ....................................................................$60 Komatsu D51 EX Dozer, 1:50 Scale ....................................................................................$60 Komatsu D51 PX Dozer, 1:50 Scale ....................................................................................$55 Komatsu D375 Dozer, 1:50 Scale ........................................................................................$75 Komatsu GD655 Motor Grader, 1:50 Scale..........................................................................$60 Komatsu WB146 Backhoe Loader w/tools, 1:50 Scale ......................................................$45 Link-Belt 210 X2 Excavator, 1:40 Scale ..............................................................................$65 Northwest 25-D Shovel, 1:50 Scale ..................................................................................$100 Oshkosh Front Discharge Mixer Truck, 1:34 scale ......................................................................$70

Peterbilt Tractor/Trailer w/Caterpillar D8R, 1:50 Scale ....................................................$100 Volvo G970 Motor Grader, 1:50 Scale ................................................................................$65 Volvo SD-122 Soil Compactor, 1:72 Scale ..........................................................................$45 Volvo A25C Articulated Truck, 1:50 Scale ..........................................................................$30 Volvo A25D Articulated Truck, 1:50 Scale ..........................................................................$45 Volvo A40D Articulated Hauler, 1:50 Scale ........................................................................$50 Volvo BL71 Backhoe Loader, 1:50 Scale ............................................................................$45 Volvo EC 210 Excavator, 1:50 Scale ....................................................................................$45 Volvo EC210C Excavator, 1:50 Scale ..................................................................................$60 Volvo EC240B Excavator, 1:50 Scale ..................................................................................$45 Volvo EC280 Excavator, 1:50 Scale......................................................................................$25 Volvo EC700 Excavator, 1:50 Scale......................................................................................$80 Volvo FH12 Tractor/Trailer w/Volvo L150C, 1:50 Scale ......................................................$60 Volvo L90E Wheel Loader, 1:50 Scale ................................................................................$65 Volvo L60E Wheel Loader w/Attachments, 1:50 Scale ......................................................$65 Volvo L35B Wheel Loader, 1:50 Scale ................................................................................$45 Volvo L350F Wheel Loader, 1:50 Scale ..............................................................................$80

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 25

ASC CONSTRUCTION EQUIPMENT NORTH CAROLINA 11425 Reames Rd Charlotte (704) 596-8283 Asheville (828) 687-0620 Raleigh (919) 661-8710 Greenville (252) 754-5280 SOUTH CAROLINA Columbia (803) 791-0740 Piedmont (864) 704-1060 North Charleston (843) 414-1120

BLANCHARD MACHINERY, INC. 14301 NE 19th Avenue Miami, FL 33181 (305) 949-2581 Fax: (305) 949-0747 www.blanchardmachinery.net Miami, FL (305) 232-2255 West Palm Beach, FL (561) 833-4634

COWIN EQUIPMENT 2238 Pinson Valley Parkway Birmingham, AL 35217 (205) 841-6666 Mobile, AL (251) 633-4020 Montgomery, AL (334) 262-6642 Huntsville, AL (256) 350-0006 Pensacola, FL (850) 479-3004 Oxford, AL (256) 832-5053 Atlanta, GA (404) 696-7210

PINNACLE CENTRAL COMPANY, INC. 103 Bryan Street Jacksonville, FL 32202 (904) 354-5746 www.pinnaclecentral.com Polk City, FL (888) 253-2444

Trucks & Trailers

SECTION

Moore Truck & Equipment to Carry XLSpecialized Trailers XL Specialized Trailers Inc. has signed a new representation agreement with Moore Truck & Equipment Co. Moore Truck & Equipment Company, out of Shreveport, La., has serviced the oilfield industry for more than 30 years. In addition to its multiple lines of oilfield trailers, Moore Truck offers heavy haul trailers for specialized loads. Moore Truck services North America and exports extensively worldwide. “Moore Truck will be another key distributor for XL, helping us gain market share in the U.S.,” said Scott Wall, president and CEO of XL. “Having a new dealer with such a strong presence in the oilfield market reinforces the message to haulers that we are working with our dealer partners to strengthen our brand and make the best trailers for any application.”

The XL team.

Scott Wall is president and CEO of XL.

XL has specialized in designing and building commercial, construction, agriculture, wind and oil energy, forestry and custom style trailers since 1995.

About XL XL has specialized in designing and building commercial, construction, agriculture, wind and oil energy, forestry and custom style trailers since 1995. Every XL trailer is backed by its limited warranty.

Eaton Launches Hydraulic Hybrid Retrofit Program Eaton Corporation will begin offering retrofit versions of its Hydraulic Launch Assist — HLA hybrid power system for refuse trucks later this year. The Refuse Retrofit Program will be offered through select qualified partners and installers. Eaton is currently seeking partners for the program. “By retrofitting existing trucks, Eaton is giving our customers a best-of-both-worlds scenario,” said Seth Deutsch, manager — Hybrid Market Planning. “Until now, our refuse market customers in North America have been frustrated in their efforts to improve fuel efficiency and reduce emissions in fleets of newer trucks with many years of service left in them. They have been asking for a hybrid solution that does not require the purchase of a new truck, and we’re

pleased to deliver the retrofit option.” The Eaton Hydraulic Launch Assist (HLA) system is a parallel hybrid system, in which the conventional powertrain is supplemented by the addition of the hydraulic system that propels the truck forward and helps slow it down. The system is best suited for vehicles that operate in stop and go duty cycles such as refuse trucks. Benefits of the system include 20 to 30 percent improvement in fuel economy, longer brake life, and increased productivity due to the extra power the HLA system provides. Eaton hybrid electric, plug-in hybrid electric and two hybrid hydraulic power systems, parallel and series, are available or in development on truck models

Eaton will begin offering retrofit versions of its Hydraulic Launch Assist hybrid power system for refuse trucks.

including International, Peterbilt, Kenworth, Freightliner, Iveco, DAF, Daimler, and Ford and on

bus models from Foton, Zhongtong, Yutong, JNP, King Long, Shen Long, Heng Tong, BCI

and Solaris. Eaton hybrid power systems have accumulated more than 30 million miles of road-tested service around the world. Companies such as FedEx, UPS, Coca-Cola Enterprises, PepsiCo and Wal-Mart are using delivery vehicles with the Eaton system. Work trucks with Eaton hybrid power also are in service at Florida Power and Light and many utility and telecom companies across North America. Benefits of the existing Eaton hybrid systems include fuel savings up to 35 percent, with similar percentages in emission reductions, extended brake life and idle time reductions of up to 87 percent during work site operations. For more information, visit www.eaton.com.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • February 10, 2010 • Page 27

INDUSTRIAL TRACTOR COMPANY Jacksonville, FL 904-296-5000 www.industrialtractor.com Lake City, FL 386-752-9544 Palatka, FL 386-325-6268 Savannah, GA 912-964-7370 Brunswick, GA 912-264-6161 Andrews, SC 843-221-4940 Ladson (Charleston), SC 843-572-0400 Walterboro, SC 843-539-1420

KELLY TRACTOR Miami, FL 305-592-5360 www.ktccat@kellytractor.com Davie, FL 954-581-8181 Fort Myers, FL 239-693-9233 Clewiston, FL 863-983-8177 West Palm Beach 561-683-1231

TIGER EQUIPMENT www.tigerequipment.com 4181 New Bern Hwy Jacksonville, NC 28546 910-346-1932

805 Old Roberts Rd Benson, NC 27504 919-989-0066

Page 28 • February 10, 2010 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

McNeilus Truck Offers Commercial CNG Concrete Mixer McNeilus Truck and Manufacturing, an Oshkosh important to have natural gas vehicles for all applications, fident we will deliver the same quality and reliability on Corporation company and manufacturer of refuse truck bod- including heavy-duty construction equipment. This is a great which McNeilus has built its reputation to our concrete cusies and concrete mixers, introduced a compressed natural gas example of how clean fuel technology is spreading to all tomers.” (CNG) concrete mixer. The McNeilus CNG-powered mixer kinds of vehicles.” The CNG concrete mixers will be fitted with 6-cylinder, meets the U.S. Environmental Protection Agency 8.9L Cummins ISL G engines developed by (EPA) 2010 heavy-duty engine emission standards Cummins Westport of Canada. Cummins’ ISL G for nitrogen oxides (NOx) and particulate matter engine features cooled exhaust gas recirculation (PM). (EGR) and electronic engine controls resulting in a The McNeilus CNG-powered concrete mixers high performance, clean-running and reliable engine offer a clean fuel technology solution to the heavythat meets EPA 2010 heavy-duty engine emissions duty truck market and will help make the construcstandards. McNeilus first plans to offer both tion industry more environmentally friendly. When Bridgemaster and Standard mixers on either the compared to their diesel engine counterparts, CNGKenworth W900 or T800 chassis. Other chassis powered mixers offer lower fuel costs, reduced noise manufacturers’ CNG platforms are pending. pollution and are six times cleaner, making them both Wuest noted that McNeilus spent several years more economical to run and environmentally friendresearching and working to understand ways to ly than diesel-powered mixers, according to the manobtain state and federal grants for alternative-fueled ufacturer. vehicles, as well as tax rebate programs associated McNeilus applied for a grant with the California with CNG-powered vehicles and fueling stations. South Coast Air Quality Management District The McNeilus CNG-powered mixer meets the U.S. Environmental McNeilus grant specialists help customers learn (SCAQMD), the governing agency on air pollution Protection Agency 2010 heavy-duty engine emission standards for more about the benefits of CNG and assist in identifor the Los Angeles South Coast Air Basin, to modi- nitrogen oxides (NOX) and particulate matter (PM). fying and securing funding for CNG fleet converfy its prototype truck so it can be commercialized and sion. sold. The project includes creating and conducting a six“Our experience as the only in-house manufacturer of “Our CNG-powered concrete mixers demonstrate the month testing program, and developing documentation for CNG-powered refuse trucks made us the best company to company’s pioneering environmentally sustainable vehicle the truck’s maintenance and operational use. work with SCAQMD in the development and commercial- solutions and continued commitment to innovation that con“We are looking forward to making this type of clean- ization of a CNG concrete mixer,” said Mike Wuest, sumers can depend on to meet their heavy-duty vehicle fueled truck widely available to construction companies Oshkosh Corporation executive vice president and commer- needs,” added Wuest. interested in promoting clean energy,” said William A. cial group president. “With our proven success in developing For more information, visit Burke, governing board chairman of the SCAQMD. “It’s CNG turnkey solutions for refuse haulers, McNeilus is con- www.mcneiluscompanies.com.

Doran, DriverTech Offer Real-Time Tire Pressure Monitoring Doran Manufacturing and DriverTech have reached a collaborative development agreement to integrate the Doran 360 tire pressure monitoring systems with DriverTech’s Windows Embedded onboard computing and mobile communications system for truck and trailer fleets. By seamlessly integrating the tire pressure monitoring capability into the DriverTech TruckPC, tire pressures for tractors and trailers can now be monitored in both the truck cab and at fleet headquarters in real-time. While tire pressure was previously the sole domain of the driver, now the responsibility can be shared for improved management of fleet assets. Control of tire-related problems is a major concern for fleets of all sizes, because low tire pressures reduce fuel efficiency, and significantly shorten the service life of tires. In addition to saving maintenance and operating costs, real-time monitoring of tire pressures allows drivers and fleet managers to

coordinate scheduled repairs to avoid costly (and potentially catastrophic) roadside breakdowns and improve the overall safety of the fleet. “We are excited to offer the capability to communicate tire pressure information and critical low pressure warnings to both the driver and fleet managers” said Doran General Manager Jim Samocki. “We are proud to be working with a high-caliber company like DriverTech, to expand their capabilities into tire pressure monitoring.” “Doran’s core operating principles, commitment to the customer and high-energy team made it an easy decision for us when reviewing tire pressure monitoring companies. We have been very impressed with the performance and reliability of the systems and the quality of the team at Doran,” said Mark Haslam — chief executive officer at DriverTech. “The ability to monitor tire pressures and

deliver real-time warnings to both the drivers and fleet managers is a unique capability that we are making available to the trucking industry,” Haslam said. “The combination of our software and Doran’s tire pressure monitoring systems will help fleets improve their efficiency and reduce operating costs.” About Doran Cincinnati-based Doran has been providing transportation safety products for RVs, school buses and commercial trucks for more than 35 years. In addition to tire pressure monitoring systems, the company provides terminals and terminal boards, LED and incandescent exterior light monitors, Sleeping Child Check monitors, emergency exit monitors and a full range of LED lighting products for the school bus market. For more in formation on Doran 360, call 866/816-SAFE or visit www.doranmfg.com.

About DriverTech Headquartered in Salt Lake City, Utah, DriverTech offers the transportation industry’s an onboard computing system utilizing three modes of communications. Using a Windows Embedded platform, DriverTech’s DT4000 TruckPC allows for a wide range of application choices including integrated invehicle scanning, electronic logs and videobased driver training. Atrue “Tri-Mode” system, the TruckPC has the ability to connect satellite, cellular and Wi-Fi wireless networks to automatically route data via the lowest-cost communication option. Used in both government and commercial applications, the system is built to military specifications and will withstand the heat, cold, moisture and vibration typical of a vehicle environment. For more information on DriverTech, call 866/331-8785 or visit www.drivertech.com.

Visit CEG’s Web Site at www.constructionequipmentguide.com

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • February 10, 2010 • Page 29

LB’s Trailer Sales 2904 Harmony Highway • Harmony, NC 28634 (704) 546-2231

Hydraulic Machinery, Inc 5024 N. 56th Street Tampa, Florida 33610

800-683-5438

You Can Now Order Parts Online at: www.craneworx.com

Winter Sale! 2006 Pettibone T8044 Telescopic Forklifts 2006 JCB 520 Forklifts 2006 JCB 506CT-HL 2007 JCB 506CT

New 2007 Sterling LT7501 Terex or Elliot Cranes-17 ton to 40 ton on New Sterling LT7501

330hp Caterpillar, Eaton Fuller 8 sp Trans, 60,000 GVW, A/C, AM/FM, Cruise, 2-50 gal alum. fuel tanks, 192" CA, 120" AF, 261" WB

Sales • Rental • Service • Parts • Financing Available

Page 30 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 31

USED SPECIALS TOUGH THEN.

2005 Moxy MT41 Offroad Truck, 1899 Hrs, #810064 ..................................................$159,000

NEW 2006 Liebherr LR622B Crawler Loader, 10 Hrs, #3928546 ..........................................$91,000

TOUGHER NOW. 2008 Manitex 40124S Boom Truck, 711 Hrs, #148375 ..................................................$244,000

2006 Link-Belt 460LX, 1750 Hrs, #K7J60898 ...... ................................................................$173,000

Call Tim Tomberlin 229-386-9472 or Cell: 229-300-9266

We Provide One Stop Complete Parts and Service Solutions. Quality Products...Quality People

Pioneer Engineering Works built their first rock crusher, the Pioneer No.12 Jaw Crusher, in 1928. And although the company name has changed over the years, the dedication to designing and building the world’s toughest, most reliable aggregate processing and recycling equipment has never waivered. That tradition continues today through our branding with other Astec companies; Johnson Crushers and Astec Mobile Screens. With our full line of washing and classifying, rock crushing, horizontal screening, high frequency screening, material handling and aggregate-related products.

We were tough then… and we’re even tougher now.

www.kpijci.com

www.staffordequipment.com

Roanoke, VA 540-992-4650 800-992-4650

Ashland, VA 804-798-4500 888-285-6200

Raleigh, NC 919-657-0070 800-687-1672

Charlotte, NC 704-333-0786 800-687-1672

West Columbia, SC 803-796-4060 800-687-1672

Valdosta, GA 229-247-4495 800-283-2576

Atlanta, GA 770-822-9050 866-358-3299

Tifton, GA 229-382-4400 800-255-4401

Douglas, GA 912-384-4400 800-559-4019

Page 30 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 31

USED SPECIALS TOUGH THEN.

2005 Moxy MT41 Offroad Truck, 1899 Hrs, #810064 ..................................................$159,000

NEW 2006 Liebherr LR622B Crawler Loader, 10 Hrs, #3928546 ..........................................$91,000

TOUGHER NOW. 2008 Manitex 40124S Boom Truck, 711 Hrs, #148375 ..................................................$244,000

2006 Link-Belt 460LX, 1750 Hrs, #K7J60898 ...... ................................................................$173,000

Call Tim Tomberlin 229-386-9472 or Cell: 229-300-9266

We Provide One Stop Complete Parts and Service Solutions. Quality Products...Quality People

We were tough then… and we’re even tougher now.

www.kpijci.com

www.staffordequipment.com

Roanoke, VA 540-992-4650 800-992-4650

Ashland, VA 804-798-4500 888-285-6200

Raleigh, NC 919-657-0070 800-687-1672

Charlotte, NC 704-333-0786 800-687-1672

West Columbia, SC 803-796-4060 800-687-1672

Valdosta, GA 229-247-4495 800-283-2576

Atlanta, GA 770-822-9050 866-358-3299

Tifton, GA 229-382-4400 800-255-4401

Douglas, GA 912-384-4400 800-559-4019

Page 32 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Coming in Issue #4… Construction Equipment Guide’s

Annual Excavators & Attachments Special Supplement The advertising deadline to place your ad in this special supplement is February 15. Contact your Regional Sales Manager to place your ad today!

Don’t miss out on an excellent opportunity to be a part of our Special Supplement featuring EXCAVATORS & ATTACHMENTS In addition to placing your ad, Construction Equipment Guide continues to provide editorial coverage of the latest industry news.

Richard McKeon Southern Virginia, Eastern Tennessee, North and South Carolina Toll Free 800/288-4234 Cell: 704/726-1452 E-mail rmckeon@cegltd.com Jim VanNatta Florida, Puerto Rico, Virgin Islands, Oregon, Washington Toll Free 800/344-3026 Cell: 321/262-9426 E-mail jvannatta@cegltd.com Rich Olivier Florida Panhandle, Georgia, Arkansas, Alabama, Mississippi, Central and Western Tennessee Toll Free 800/409-1479 Cell: 404/831-9526 E-mail rolivier@cegltd.com

Crushing, Screening & Recycling Section Material Handler’s Double-Duty Ups Landfill Efficiency

Primarily used to sort debris at the landfill, operators appreciate the visibility that the elevating cab gives them.

The D Series – Sennebogen’s Fourth Generation of Material Handlers Sennebogen was among the first manufacturers to offer the scrap and recycling industries a line of purpose-built material handling equipment in place of excavators retrofitted for unique lifting applications. Today, Sennebogen offers a wide range of material handlers with operating weights ranging from 48,000 to 350,000 lbs. (21,772 to 158,757 kg) in rubber tired, crawler and pedestal versions. The company’s D-Series models are Sennebogen’s fourth generation of material handling machines to America. On the D Series machines, the safety features are centered around the cab. • A sliding door combined with the adjacent catwalk provides an easy and safe way for the operator to step into and out of the cab without the awkwardness of a swinging door hitting the catwalk rail. • Getting to and from the cab is easier with a cab position that provides easy access for the operator via a small set of stairs. • Upgraded climate control systems in the cab create a comfortable atmosphere that keeps operators alert, attentive and undistracted. • Improved access to maintenance areas, such as a centralized undercarriage greasing point, makes maintenance easier and safer. • Tier III emissions-compliant engines.

Gary Brouillette, general manager of the landfill division of Samsula Waste Inc., was shopping around for a dependable material handler to replace the company’s existing machine. After looking over the competition, he chose to purchase a Sennebogen 825 M D Series machine with its Cummins engine, 47 ft. (14.3 m) of reach and enhanced safety features. “In the end, we decided to go with the reliability and dependability of the purpose-built Sennebogen material handler, which is tailor made for our waste, recycling and landfill needs,” said Brouillette. “In the nine months we’ve had our new 825 M, we’ve had absolutely no problems with it — it just runs and runs. All we’ve done so far is routine maintenance. That’s the kind of uptime and productivity we expect and require of our equipment.” Samsula Landfill is one of the four divisions of the parent compa-

The 825 D Series, with a sliding door and an adjacent catwalk, provides operators with increased comfort and safety.

ny Samsula Waste Inc., which was founded in 1980 by company President Yancey McDonald. Spread out over approximately 67 acres, the landfill division employs 30 people and serves the counties of Volusia, Flagler and Brevard in mid-eastern Florida. The experienced team at Samsula Landfill provides service to residential, commercial and industrial customers, including construction and waste companies and general contractors. Sennebogen 825 M Does Double-Duty at Samsula Fitted with a Gensco five-tine grapple with a magnet, the Sennebogen 825 M D Series is being used primarily to separate construction and demolition debris at the landfill site. It also is used to feed a horizontal wood grinder. Samsula went with a rubber-tired machine to enable operators to get around the yard quickly and effi-

ciently. The cab on the 825 D Series is loaded with new features designed to increase operator efficiency, comfort and productivity, including a sliding door combined with the adjacent catwalk, improved access to maintenance areas, and upgraded climate control systems, according to the company. Moving up to the bigger machine with its Tier III emissions-compliant 204 hp (152 kW) Cummins engine has increased the site’s productivity, according to Brouillette. “Since we took possession of it , more often than not we’ve been running the Sennebogen 825 M ten hours a day, six days a week and we haven’t had to do one thing to it,” said Brouillette. “The Cummins engine in the 825 M makes a world of difference. And, of course, the 47 feet of reach on the machine is a real bonus.”

Page 34 • February 10, 2010 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

These Grinders Mean Business CMI Equipment Sales, Inc.

2009 Tub Grinder

3010T Tub Grinder with Track System

Power up your productivity with the impressive ﬂeet of grinders from DuraTech. All DuraTech grinders feature enclosed engine compartments with self-cleaning rotary screens on the air intake and HPTO microprocessor-controlled clutches. They are equipped with CAT diesel engines ranging from 325hp to 950hp. DuraTech takes on heavy-duty jobs with the highest level of efﬁciency.

l a e

recycling without limits E M patented duplex system CO L E sW e ri i qu

2405 Dickerson Rd. Nashville, TN 37207 615-227-7800 Fax: 615-227-4013 www.cmiequip.com

Blue Diamond’s Stump Grinder Maximizes Flow

one machine - unlimited possibilities

impact or jaw choice is yours office@rocksternorthamerica.com

www.rocksternorthamerica.com

1-514-909-2200

The Blue Diamond stump grinder maximizes hydraulic flow by focusing it all directly to the cutting wheel. This grinder operates on low speed but high torque and uses the face of the wheel to cut. This allows the grinder to cut up to 8 in. (20 cm) per pass and the chips are kept in a smaller area. Three models are available depending on the flow of the machine and they come with a 2 year warranty.

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • February 10, 2010 • Page 35

www.powerscreencrushingandscreening.com

USED EQUIPMENT FOR SALE MUST SELL

Terex Pegson XA400, 2008 Model, Approx 1650 Hours, Excellent Condition, 3 months warranty ...................Priced to Sell $335,000

Pegson 428 Trakpactor, (42”x42” HSI), 2006 Model, Approx. 1700 Hrs, Fully Reconditioned...........Priced to Sell $255,000

Powerscreen Horizon 6’x20’ 3 Deck Horizontal Screen on Tracks, 2006 Model, Low Hours, Very Good Condition ...........$295,000 Reduced $249,000

Pegson Metrotrak, 2008 Model, Only 400 Hours, New Condition..................................... .................................Priced to Sell $325,000

• Sales • Service • Parts

No Reasonable Offer Refused

• Rentals • Financing

Powerscreen 511 Trommel, 2002 Model, in Good Working Order, Only 1143 Hrs .............. ...................................Priced to Sell $45,000

Serving the Carolinas, Virginia & West Virginia

Page 36 • February 10, 2010 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

U-SCREEN C-36

NEW!

Dealer Inquiries Invited Designed For Skid Steers, Loaders & Excavators • Screen 500 to 600 yards per day • Any Size Screen Available • Stacking Height: 9’ • Width: 5’6” • Length: 28” • 6’x5’ Screening Deck

• Easy Change Screens • 25 HP Kubota Diesel Power • Hydraulically operated Screen • Hydraulic trailer axle • 30” Hydraulic Conveyor Belt • Towed with 1 Ton Vehicle

www.u-screen.com 905 Turnpike Street • Canton, MA 02021

1-866-USCREEN (781) 828-9100 • Fax: (781) 821-8807

Vermeer Compost Turner Does More With Less Space Vermeer Corporation has introduced a self-propelled compost turner with elevating-face technology. The CT1010TX compost turner can be used on compost sites with either continuous-stack or windrow configurations and provides minimal unwanted degradation to the organic material. The CT1010TX helps compost sites make the best use of their space. By utilizing the optional conveyor, compost sites can create a continuous stack configuration, eliminating the need for open space between the windrows. This allows for three to four times more material to be placed in the same space as conventional windrow composting, according to the manufacturer. “Space is a premium in composting sites,” said Chris Nichols, environmental sales manager of Vermeer Corporation. “The CT1010TX allows compost sites to stack more material in less space. But the unit also works well in windrow configurations.” Powered by a 215 hp (160 kW) Cummins QSB 6.7 L engine, the CT1010TX can process up to 2,500 to 4,000 cu. yds. (1,911 to 3,058 cu m) of compost per hour, depending on the type of material and moisture content. The CT1010TX turns a stack 10 ft. (3 m) wide and 9 ft. (2.7 m) high.

The unit is propelled by a dual steel track system, which helps increase traction over wheeled units and produces less ground pressure when working in nonpaved compost sites. Amaximum speed of 0 to 3.2 mph (0 to 5.1 kmh) in the high range helps with transport and cycle times, while the 0 to 6.5 fpm (0 to 2.0 mpm) in low range provides enhanced control in wet and heavy material. SmartTrack, an advanced control system, monitors elevating-face pressure and will slow or stop the ground drive when the elevating-face pressure reaches a pre- Vermeer’s CT1010TX self-propelled compost determined level. This feature has the turner with elevating-face technology can be potential to increase machine and job site used on compost sites with either continuproductivity by reducing operator inter- ous-stack or windrow configurations. face. “Our elevating-face technology features a tact with contaminants, such as rocks and combination of paddles and teeth that lift and metals. The grade 8 bolt will retain the tooth tumble the compost material up the face of to the machine, so it is not lost in the pile, the compost turner and discharge the materi- reducing repair costs and service time. An optional 48-in. (122 cm) wide V-cleat al at the rear of the machine,” said Nichols. “This innovative process does not degrade discharge conveyor moves the compost the compost material and introduces more away from the machine and allows customers to create a continuous stack of comoxygen into the compost pile.” The elevating face features hardened cup- post. The 24-ft. (7.3 m) conveyor extends style teeth held in place using grade 5 and approximately 8 ft. (2.6 m) beyond the left grade 8 bolts. The grade 5 bolt acts as a shear side of the machine and can be adjusted point for the tooth should teeth come in con- between 10.5 and 13.5 ft. (3 and 4 m) dis-

charge height for loading material into a transport vehicle. The CT1010TX cab includes a variety of features designed for operator convenience and comfort, including a fully adjustable seat, cab pressurization with self-adjusting climate controls, 12 volt accessory plug-ins, AM/FM/CD sound system and large windows with front and side wiper/washer systems. An active-carbon cab air filtration system aids in removing odors and fumes, as well as dust and dirt particles. The elevating face, optional conveyor and ground drive functions are all controlled with comfortable ergonomic dual joystick controls, minimizing operator movements and reducing fatigue. A single switch staggers the start and stop functions of the conveyor and elevating face. This feature helps prevent operator error that could result in potential plugging of the conveyor, according to the manufacturer. Separate reversible hydrostatic pumps control the dual tracks, elevating face and optional conveyor providing the operator complete and independent control of the primary machine functions. For more information, visit www.vermeer.com.

The

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • February 10, 2010 • Page 37

Construction Equipment Co. 18650 SW Pacific Highway Tualatin, Oregon 97062 ID[ www.ceccrushers.com

The PRODUCT you want.... The PRODUCTION you need.... 102x115 Track Mounted Impactor

6x16 Screen-It

Crushing Screening Washing Conveyors 6x16 Wash Plant

26x42 Track Mounted Jaw Crusher

....At a PRICE you can afford Ring Power Corp. Birmingham, AL 2238 Pinson Valley Parkway Birmingham, AL 35202 205-841-6666 205-849-0853 (fax) Huntsville/Decatur, AL 15101 AL Hwy. 20 Madison, AL 35758 256-536-9390 256-355-5250 (fax)

Mobile, AL 35 Schillinger Road, North Mobile, AL 36601 251-633-4020 251-639-0461 (fax)

Oxford, AL 1501 Highway 78 East Oxford, AL 36203 256-832-5053 256-831-4295 (fax)

Atlanta, GA 5710 Riverview Road Atlanta, GA 30126 404-696-7210 404-699-1679 (fax)

500 World Commerce Parkway St. Augustine, FL 32092 904-737-7730 904-281-9110 (fax) www.ringpower.com

Pompano 407-466-5509

Montgomery, AL 3120 Old Hayneville Road Montgomery, AL 36108 334-262-6642 334-834-2272 (fax)

Pensacola, FL 7950 Pittman Avenue Pensacola, FL 32534 850-479-3004 850-474-1602 (fax)

Albany, GA 1819 West Oakridge Drive Albany, GA 31707 229-888-6247 229-888-9062 (fax)

Lakeland 407-466-5509

Palm Bay 407-466-5509

Brooksville 407-466-5509

Lake City 407-466-5509

Sarasota 407-466-5509

Ocala 407-466-5509

Daytona 407-466-5509

Page 38 • February 10, 2010 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

Large Grinder a Perfect Fit for Disaster Recovery Firm The recent devastating ice storms in Kentucky and Arkansas once again raised awareness of nature’s power and how helpless man is against it. Events like those, however, also spotlight the valuable role played by companies who come in during the recovery effort to help an area restore some semblance of normalcy. Last year, one such firm, Bamaco Inc., headed to the Houston suburb of Baytown to tackle the cleanup from the onslaught of Hurricane Ike. While its primary goal was, obviously, the recovery effort, the firm also chose the Baytown site as an opportunity to modify its approach to processing the nearly one million cubic yards of wood waste it encountered. At the center of that modification was the replacement of a pair of 1,000 hp (745 kW) grinders with a single, 1,200 hp (894.5 kW) Morbark Model 1600 tub — the largest tub grinder in the manufacturer’s line. By project’s end, Bamaco had not only upped production, it also had improved onsite efficiency and safety, and lowered operating costs. It also found itself facing another huge challenge, one it hadn’t foreseen: finding a way to keep the new grinder fed. What’s in a Name? Despite the fact that all the family members who head up Bamaco hail from Alabama, the company name has a totally different significance, said Jeff Mitchell, Bamaco’s assistant vice president. “The name is actually an acronym for ‘Beverly and Mike and Company’ — Beverly being my mom and Mike being my father” — said Mitchell. “My dad has better than 30 years experience doing this type of work throughout the southeast, so he’s no stranger to disaster recovery. However, in 2002, he decided to incorporate under the Bamaco name and bring my brother Jason and myself on board.” Today the Bunnell, Fla.-based firm operates nationwide, tackling a broad range of projects including hurricane clean-up; debris removal from other “events” such as ice storms, tornadoes, etc.; hazardous materials removal; demolition; beach restoration; canal restoration and more.

“We are almost constantly on the road,” said Mitchell. “Down south during hurricane season, up north when the ice storms hit, you name it. We have a huge number of pre-positioned contracts in place that allow us to come into an area quickly after a storm hits. In fact, we were in Baytown the day after Ike went through the area. Getting these areas cleaned up and getting people back on their feet is our primary goal; having those contracts in place streamlines the process and gets us working toward that goal.” Unbelievable Volumes Having worked all the major hurricanes in recent memory, Bamaco was no stranger to largescale cleanups. Nevertheless, upon arrival at Baytown, it was still astounded at the volume of material they were facing. “We were in charge of about six separate collection sites around Baytown and some of them were just filled to capacity, with more debris being picked up daily,” said Mitchell. “To make a real dent in the volume, we subcontracted out to several other grinding firms who owned their own machines. Their challenge was to try to grind it and haul it out as fast as it was coming in. Unfortunately, that was rarely the case. Their grinders were pushed to the max but just couldn’t keep up with the inflow of material.” Mitchell said that, despite pushing the pair of 1,000 hp units Bamaco owned to the limit, they were struggling to keep up with volumes at the main Baytown site at which they were processing. A different approach was needed and a mutual friend of the Mitchells had what they thought just might be the answer. Supersizing It The potential solution to which the Mitchells referred was a Morbark Model 1600, a 1,200 hp tub grinder that the friend in question had seen work firsthand in Florida. “He saw he 1600 in action and said that it was just an unbelievable piece of equipment,” said Mitchell. “He swore that anyone using it would need more than a couple of medium-sized excavators to keep

up with its production. We, of course, were a bit skeptical, but wanted to see what it could do. So we called John Dale, the Morbark sales rep for this area and within 24 hours he had it down here for a demo.” The demo apparently put to rest any suspicion that Mitchell’s friend had overstated the 1600’s potential. “We couldn’t believe what it could do in terms of production,” said Mitchell. “Morbark told us the

“In our business, we mostly have to work with the hand we are dealt. Often, that can mean smallacreage lots, and debris coming in at a 50,000 yard-a-day clip. In order to get it ground up and hauled off as fast as it’s coming in, we’ve needed a minimum of three machines grinding and at least that many other loaders feeding them. The Model 1600 has allowed us to actually increase production while reducing the equipment and man-

“There’s no doubt in our minds that, over one busy hurricane season in Florida, the Morbark will pay for itself many times over.”

Jason Mitchell Bamaco Inc.

machine is rated for as much as 1,400 cubic yards an hour — we feel that’s a really conservative estimate. We bought the unit just a couple days after the demo and since then it has exceeded our expectations on almost every count.” Command Performance Given the successful results of the test, the 1600 had to be extremely impressive onsite to make any more of an impact on the Mitchells — and it was. Jason Mitchell said the unit was put to the test immediately upon going into service and more than met the challenge. “We had a stockpile built up at the large site that was probably in excess of 100,000 cubic yards. We knew from working another location that was similarly backlogged, that a trio of 1,000 hp horizontals had to work round-the clock for four days to get that material processed. We came in here with just the 1600 and — working only a single shift each day — did the same volume in three days. That won us over in a hurry.” Jason said the benefits provided by the larger machine go much further that simply how much material comes off the discharge conveyor each hour.

power needed. That’s a huge benefit to us: having fewer machines means a better ability to control onsite traffic flow, improved safety, lower operating costs, and so on. It’s really made a big impact on the way we operate.” Bigger Iron Ahead With throughputs at higher levels than it had ever experienced, Bamaco’s new dilemma was finding the best method possible to keep it fed. Though it made do with the pair of mid-sized excavators — a Cat 320 and a Hitachi Zaxis 200 — it found them anything but efficient for loading the new grinder. “There’s no doubt that on future projects we will have larger machines — probably a pair of 90,000 lb. machines like a Cat 330 or something similar,” said Jason. “The smaller machines were constantly struggling to keep the 1600 fed and we were only running the grinder at 42 percent of its maximum power.” According to Jason, there was one occasion where they ran the unit at full power — just to see what it could do. He said the tub was empty after only three or four revolutions. “We backed it down and never ran it full out on that job again. So,

essentially we ran the grinder at less than half power for the length of the project and it still easily outperformed three horizontals. That to me says it was more than worth the investment.” The Name Says It All Bamaco is a strong proponent of customer service and demands the same from its equipment suppliers. Jeff said they were impressed with the support they received from Morbark from the outset and continue to be so even today, well after the sale. “First of all, the grinder itself is designed to be user-friendly and minimize maintenance concerns. We run the machine for four hours, shut it down to do regular preventive maintenance such as greasing, air filter blow-outs, and so on, and resume for another four hours. Morbark, as a company, however, is equally impressive. They were right out here when we needed them for a demo; they stayed on to make sure we were running without any issues; and they made a service technician available to use throughout the time we were doing the Baytown job. That kind of service is invaluable.” Moving up to the larger grinder does, of course, entail additional expenditure. When pressed whether those costs will prove justifiable, both Jeff and Jason Mitchell are hard-pressed to hold back their enthusiasm. “There’s no doubt in our minds that, over one busy hurricane season in Florida, the Morbark will pay for itself many times over. As a matter of fact, we probably did better than 900,000 yards at Baytown, more than half of which went through the Model 1600. There’s a good chance it might have come close to paying for itself on that job alone. Our business is centered around finding ways to get the job done in the safest, fastest, most efficient manner possible. While we initially chose the 1600 based on the impressive volumes of material it could handle, we’ve since come to find that the benefits of adding the machine run far deeper than that — and that’s a really nice plus for us.”

Construction Equipment Guide â€˘ Crushing, Screening & Recycling Section â€˘ www.constructionequipmentguide.com â€˘ February 10, 2010 â€˘ Page 39

REMU Screening Buckets Even more productive than big trommels!

Â‡ )RU PL[LQJ VFUHHQLQJ VHSDUDWLQJ DHUDWLQJ SDGGLQJ HWF Â‡ :RUNV ZHOO ZLWK PRLVW DQG GLIÂżFXOW PDWHULDOV

Screening Buckets & Amphibious Excavators ZZZ UHPX Âż

7ROO )UHH

(PDLO

XVD#UHPX Âż

Big Float Amphibious Excavators

Â‡ $PSKLELRXV H[FDYDWRU IRU VKDOORZ DQG PDUVKODQGV Â‡ +\GUDXOLF SRQWRRQ VWUXFWXUH FDQ EH QDUURZHG IRU WUDQVSRUWDWLRQ

Indecoâ€™s Multi 1000 Razes the Bar on Large-Scale Jobs Indecoâ€™s Multi 1000 increases the range of its â€œnon-impactâ€? products. Designed to meet the needs of the American market, where large-size equipment is more popular, the Multi 1000 is the ideal tool for large-scale demolition work and can be mounted on carriers from 79,500 to 132,500 lbs. (36,060 to 60,101 kg).

V i s i t C E G â€™s We b S i t e a t www.constructionequipmentguide.com

Come Visit...

Your Screening Headquarters Value for Money Since 1985

(843) 525-6140

www.sandscience.com See our web page for Special Deals

Affordable Trommels

RENTALS Available

Fax: (843) 525-0537 Frontage Rd, exit 33 on SC I-95 (Beaufort Exit)

Vibrating Screens

Conveyors & Feeders

Page 40 • February 10, 2010 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

Hyundai Construction Equipment Announces Americas Expansion For the past 15 years Hyundai Construction Equipment U.S.A. Inc has been marketing Hyundai construction equipment and forklifts through its dealer network solely in North America. In an effort to tailor operations to meet today’s market needs Hyundai Construction Equipment U.S.A. Inc. (HCEUSA) and parent company Hyundai Heavy Industries (HHI) in South Korea have decided to expand the HCEUSA’s operational reach to cover all of North, Central and South America. Under this new business arrangement effective Jan. 1, 2010, HCEUSA will be responsible for all the sales, service and parts business in Central and South America in both construction equipment (CE) and forklift (FL). HCEUSA will be adding the current Central and South American dealer network and its many opportunities for expansion to its already expansive network of CE and FL dealers in North America. Hyundai Construction Equipment U.S.A. Inc. will continue its current business model of marketing, selling and servicing its construction

TRACTOR TRACS, INC. Undercarriage Specialists

Rollers

RubberTracks

Track Chain Assemblies

Sprockets

Front Idlers and Tension Devices

Undercarriage • Tracks • Rollers • Idlers • Sprockets Cutting Edges • Teeth • Rubber Tracks

equipment and forklifts through its dealer network and providing additional sales, service and parts support through the home office in Elk Grove Village, Ill. “With the current market conditions being what they are we’ve had to look at all aspects of our business. We feel that by consolidating the resources we have here and in Korea under one roof covering all of the Americas we can provide our dealers and ultimately our customers with the highest level of quality and support possible. It’s important to us that when our customers think of product quality and support that they think of Hyundai,” said John Lim, president of Hyundai Construction Equipment U.S.A. Inc. A corporate name change for Hyundai Construction Equipment U.S.A. Inc. to reflect its operational expansion covering all of the Americas is anticipated; though no timeline for that change has been announced. For more information, visit www.hceusa.com.

Two Taxes Floated to Pay for Road Repairs in Ark. LITTLE ROCK, Ark. (AP) Two taxes are emerging as a way to raise money to pay for road repairs in Arkansas. But a spokesman for the governor said any tax increase will be a tough sell in the Legislature during a recession. A subcommittee of the Arkansas Blue Ribbon Committee on Highway Finance is discussing an excise tax on the wholesale cost of fuel and indexing taxes on diesel and gasoline to highway construction costs. Members of the subcommittee say the two taxes would raise at least an additional $200 million a year for the Arkansas Highway and Transportation Department (AHTD). AHTD said it will have $4.1 billion for construction over the next decade but has needs totaling $19.1 billion. Each tax would require a three-fourths majority vote in the Legislature to pass.

5505 Caterpillar Drive • Apex, NC 27539

Visit CEG’s Web Site at

919-387-1050 888-526-9740 www.tractortracs.com

www.construction equipmentguide.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 41

Page 42 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

B C usiness

alendar

February 24-25, 2010 – EXPO. Chicago, IL Construction Expo to be held at the Schaumburg Convention Center, Schaumburg, IL. For tickets and further information please contact Sheila Kirby (800-523-2200) or Bob Buckley (800-9927116) at Construction Equipment Guide, Fort Washington, PA. February 25, 2010 – BANQUET. AGC Club of St. Louis, MO is holding it’s Forty-First Annual Safety Banquet from 4:00 to 8:00 P.M. Orlando Gardens, Hoffmeister, Road, St. Louis, MO. For more information, contact Mary Jobe at 314781-2356 or email: mjobe@agcstl.org February 27 to March 3, 2010 – International Hardware Fair. International Hardware Fair Cologne 2010, Cologne, Germany. For more information regarding this event contact Chris Beavers, Koelnmesse, Inc. at 773-326-9928. February/March/April 2010 – Meetings. IAAP Grassroots Meetings in Your Region include Grassroots meetings hosted by the IAAP Legislative Committee and the Transportation for Illinois Coalition provide a chance to catch up with old friends and meet new ones interested in state transportation issues. Please sign up for one or more in your area: Capitol Region Grassroots Meeting (IDOT Region 4), Monday, February 15 at 6:00 p.m., Lake Pointe Grill, 1386 Toronto Road in Springfield, Illinois. Southern Region Grassroots Meeting (IDOT Region 5), Monday, February 22 at 6:00 p.m, Holiday Inn, 222 Potomac Boulevard in Mt. Vernon, Illinois. Central Region Grassroots Meeting (IDOT Region 3), Monday March 1 at 6:00 p.m., The Chateau Hotel, 1601 Jumer Drive in Bloomington, Illinois. Northeast Region Grassroots Meeting (IDOT District 1), Monday March 8 at 6:00 p.m., Bluestone Bar & Grill, 2387 E. Joliet Highway in New Lenox, Illinois. Contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers for more information: Office: 217-241-1639; Cell: 217-899-5125; Fax: 217-241-1641; Email: shawn@hansoninfosys.com March 2-3, 2010 – Conference. The 19th annual Spring Thaw/State Grants Safety Conference will be held at the Starved Rock Lodge in Utica, Illinois. This conference is co-sponsored by the Mne Safety and Health Administration and the Illinois Department of Natural Resources, Office of Mines and Minerals State Grants Program. The Conference is free; however, if you wish to partake of the food and refreshments there is a $30.00 fee. Conference check-in begins at noon on Tuesday, March 2nd, with the opening session beginning at 1:00 p.m. Tuesday’s program will conclude with a complimentary evening reception sponsored by the IAAP. For more information, contact Mike Falter, IDNR/Office of Mines and Minerals, at: 217-785-9019 or Michael.falter@illinois.gov. March 9-10, 2010 – EXPO. Philadelphia Construction EXPO to be held at the Greater Philadelphia Expo Center, Oaks, PA. For ticket and further information, please contact Sheila Kirby (800523-2200) or Bob Buckley (800-992-7116) at Construction Equipment Guide, Ft. Washington, PA. March 17-20, 2010 – CONVENTION ‘10. Mark your calendar! AGC’s 91st Annual Convention will be held at the Marriott Orlando World Center in Orlando, FL. More information will be posted as soon as it is available. March 18-19, 2010 – EXPO. Midwest Construction Expo to be held at the Minneapolis Convention Center, Minneapolis, MN. For tickets and further information please contact Sheila Kirby (800-523-2200) or Bob Buckley (800-9927116) at Construction Equipment Guide, Fort Washington, PA. March 24, 2010 – Breakfast. The IAAP Legislative Breakfast is scheduled from 7:00 to 9:00 a.m. at the Sangamo Club in Springfield Illinois. The IAAP actively works for legislation that helps the aggregates industry and fights legislation that hurts aggregate producers and the companies selling goods and services to this industry. To be successful, these efforts require face to face contacts with members of the Illinois General Assembly. You can be an active and effective part of these lobbying efforts by attending. For more information, call Glenda Schoening, IAAP Office Manager at 217-241-1639. April 26, 2010 – Meeting. Illinois Valley Region (IDOT District 3) is holding a gathering at 6:00 p.m., Morris, Illinois with the Transportation for Illinois Coalition to extend invitations to its members made up of statewide and regional business, organized labor, governmental and not-for-profit organizations. For more information you may call Glenda Schoening at 217-241-1639. May 11, 2010 – Convention. The IAAP’s 42nd Annual Convention is scheduled at the Crowne Plaza Hotel in Springfield, Illinois. The Illinois Association of Aggregate Producers is putting together another fine Convention program, all we need is you! Save the Date!!! June 1-5, 2010 – EXPO. ConExpo Russia 2010, Crocus International Exhibition Center, Moscow, Russia. ConExpo Russia is a new construction exhibition supported by the Russian government, Russian contractor groups, and the manufacturers who exhibit. It is the gathering place of the construction, utility and forestry industries in Russia and surrounding states, featuring the latest in equipment technologies and education. The Russian construction industry is booming. With continued growth potential and infrastructure projects in the nonresidential construction, forestry and utility industries, companies are looking to the Russian market to expand their enterprise. For more information visit: www.conexporussia.com and email: info@conexporussia.com and phone: 800-867-6060. March 22-26, 2011 – EXPO. CONEXPO-CON/AGG, Las Vegas, Nevada, U.S.A. CONEXPO-CON/AGG will be the world’s largest international gathering place in 2011 for the construction and construction materials industries, showcasing the latest equipment, services and technologies. For more information, visit: www.conexpoconagg.com; E-mail: info@conexpoconagg.com or phone: 800-867-6060. March 22-26, 2011 – International Exposition. Las Vegas, Nevada, U.S.A. IFPE 2011 - the International Exposition for Power Transmission is the leading international exposition and technical conference for hydraulic, pneumatic, electrical and mechanical power transmission components, systems and controls. For information visit: www.ifpe.com; E-mail: info@ifpe.com or phone 800-867-6060. DONATION - HELP Support IAAP’s Political Activities – The IAAP Political Action Committee (PAC)was created in order to provide financial support for our allies in the Illinois General Assembly. Whether from Chicago or Downstate Illinois, Democrat or Republican, these legislators all have one thing in common – they support bills that help the Illinois aggregates industry and oppose bills that hurt our interests. As the cost of political campaigns continues to rise, we want to ensure that legislators who support this industry can compete and continue to do good work. For that reason, supporting the IAAP PAC is critically important to the future of our industry, your company, and your Association’s political activities. Please consider sending a donation, payable to the IAAP, to: John Henriksen, Secretary/Treasurer, IAAP PAC, 1115 S. 2nd Street, Springfield, Illinois 62704.

SE Equipment Inc. Grows; Adds Ga., S.C. Dealerships

Steve Duncan, who has relocated from SE Equipment’s Bobcat of Greenville location, is now manager of Bobcat of Savannah. BOBCAT from page 20

deal with the same people no matter what part of the region they’re in.” In the future, SE Equipment plans to continue expanding in “contiguous territory to be able to increase our coverage to represent the Bobcat line. Our strategy is to grow our business and number of operations. Adding these new facilities to the three we already had, Spartanburg, Greenville and Columbia, has been a big step for us. We especially want to recognize the management team for their efforts in making this move happen seamlessly,” Hopper concluded.

The Bobcat of Savannah facility.

And Your Hitachi Dealers

Virginia Division Ashland, VA 804/798-6001 Chester, VA 804/748-9324 Burkeville, VA 434/767-5578 Salem, VA 540/380-2011 Fishersville, VA 540/337-3057 Winchester, VA 540/667-9777 Manassas Park, VA 703/631-8500 Danville, VA 434/822-6110 Fredericksburg, VA 540/898-8933

Carolinas’ Division Charlotte, NC 704/597-0211 Greensboro, NC 336/668-2762 Wilkesboro, NC 336/973-8201 Mt. Gilead, NC 910/439-5653 Rock Hill, SC 803/325-1555 Hickory, NC 828/322-4300 Asheboro, NC 336/625-2212 Matthews, NC 704/821-7399 Salisbury, NC 704/636-2671

1206 Blaylock St. P.O. Box 3329 Albany, GA 31706 229/888-1212 Cuthbert, GA 229/732-2631 Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600 West Columbia, SC 803/794-9340 Asheville, NC 828/667-0176 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688

Raleigh, NC 919/772-2121 Greenville, NC 252/758-4403 New Bern, NC 252/638-5838 Fayetteville, NC 910/424-1200 Wilmington, NC 910/675-9211 Ahoskie, NC 252/332-5550

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 43

Your wish is its command. Think it, then do it, with the precise hydraulics of a new Zaxis Dash-3 Excavator. Low-effort, short-throw pilot levers, balanced engine performance and hydraulic ﬂow, best-in-class metering, and smooth multifunction operation make good operators great, and great ones unbelievable. These utility-sized Dash-3s also deliver increased swing torque, faster arm roll-in, and faster boom lower/arm movement for faster cycle times. Bonus. Tired of jerky, wandering controls that have a mind of their own? Make a smooth move to new Hitachi Dash-3 Excavators. www.hitachiconstruction.com

6870 Phillips Hwy. Jacksonville, FL 32245 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Savannah, GA 912/964-7370

Brunswick, GA 912/264-6161 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420

4500 Wendell Dr., SW Atlanta, GA 30336 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344

Braselton, GA 770/965-1889 Macon, GA 478/788-1586 Adairsville, GA 770/773-9857

Page 44 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Yoder & Frey Holds Sale for Flatiron-Tidewater Skanska

ood weather and good pricing combined at a surplus liquidation auction Jan. 29 in Tampa, Fla. The sale featured surplus iron from Flatiron-Tidewater Skanska, which recently completed projects near the Tampa airport.

Bob Jones helps a friend (not pictured) look over some equipment, including this Cat D3G. Mike Scott, president of Mascott Inc., inspects this Caterpillar 135H before the crowd gathers around to bid on it.

Carlton Calfee, president of Certified Crane, is really interested in this Terex BT 4400.

Andrew Geurink, A & D Farms, Mich., takes a hard look at some of the compaction equipment available, including this Ingersoll Rand SD-70D.

This 2003 Cat CP 563D went to the bidder offering $59,000.

Dave Hall of All Sunshine Crane Rental was interested in two Terex RT 450s, one of which he tries out here.

Vernon Roller of Roller Construction came all the way from Briston, Tenn., to see what was available, including this Cat 315 CL.

Bidders gather around the rollers up for bid at Yoder & Frey’s Jan. 29 auction in Tampa, Fla.

Dale Soinski (L) and Russ Fair of Soughting Materials in Ohio are interested in some of the compaction equipment available at the auction.

(L-R): John Helton and J. W. Fulwood of Tractor World in Plant City, Fla., chat with Colin Kelley.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 45

Dozier Crane

Ready for Action

Pooler, GA 31322 912-748-2684 Fax: 912-748-5361

Whatever you’re planning, we’re there for you. M.D. Moody & Sons Jacksonville, FL 32207 904-737-4401 Fax: 904-636-0532

Stafford www.staffordequipment.com Ashland, VA 23005 804-798-4500 • 888-285-6200 Roanoke, VA 24077 540-992-4650 • 800-992-4650 Charlotte, NC 28206 704-333-0786 • 800-687-1672 Raleigh, NC 27607 919-657-0070 • 800-687-1672 West Columbia, SC 29169 803-796-4060 • 800-687-1672 Atlanta, GA 30045 770-822-9050 • 866-358-3299 Valdosta, GA 31602 229-247-4495 • 800-283-2576 Tifton, GA 31793 229-382-4400 • 800-255-4401

Tough and rugged, the Terex® RT 1120 is the crane of choice for the most demanding rough terrain applications. What makes the Terex RT 1120 so valuable for you: ®

Other Terex Cranes Products: ®

• Telescopic Truck Cranes

• 155 ft. of full power, 3-mode boom which telescopes under load • 30 to 56 ft. bi-fold jib with two 26 ft. inserts provide 271 ft. tip height

• Boom Trucks

• Crawler Cranes

• Electro-proportional joystick controls

• Lattice Boom Truck Cranes

• 300 horsepower engine

• Tower Cranes • Rough Terrain Cranes

Mobile, AL 36582 251-338-8909 • 800-687-1672

• All Terrain Cranes

• Hydraulic self-removing counterweight for easy transportation

Terex Cranes Waverly Waverly, IA Tel 319 352 3920 • Fax 319-352-5727 www.terex-cranes.com inquire@terexwaverly.com

Douglas, GA 31533 912-384-4400 • 800-559-4019

For Your Local Terex Dealer, Please Contact: Waverly Operations 106 12th Street S.E. Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: inquire@terexwaverly.com web: http://www.terex-cranes.com

Page 46 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 47

These workmates putHigher more work within reach. Faster cycles. productivity Name the job and there’s a 310SJ or 410J Backhoe Loader to help you get Don’t be fooled by imitators. Thirty-plus it done. You’ll benefit from uptimeyears’ experience building best enhancing features such asthe advanced hydrostatic dozers makes John diagnostic monitors, solid-state Deere the brandand for you. Innovations,cooling like Total electronics, an improved Machine Control (TMC), allow operators system. Other advantages include to customize machine response ground-level service points, low and operation to their personal maintenance costs, smoothpreferences. and J-Serieshydraulics, Dozers deliver unsurpassed responsive and best-in-class productivity and uptime, along with the resale value. Go for the Total Machine lowest possible costs. Control (TMC) anddaily tooloperating carrier options And that’s just for starters. and take on even more work. To put 310SJ or 410J Loader Toalearn all about JohnBackhoe Deere J-Series to work for you, give us a call. Dozers, give us a call.

METRAC Main Office SW Atlanta, GA 404/691-9445 Grovetown, GA 706/855-5440 Columbus, GA 706/687-3344 Braselton, GA 770/965-1889 Macon, GA 478/788-1586 Adairsville, GA 770/773-9857

KS1CUFF0012N -00218353

R.W. MOORE EQUIP. CO. Main Office Raleigh, NC 919/772-2121 Ahoskie, NC 252/332-5550 Fayetteville, NC 910/424-1200 New Bern, NC 252/638-5838 Greenville, NC 252/758-4403 Wilmington, NC 910/675-9211

STAFFORD www.staffordequipment.com Tifton, GA 229/382-4400 800/255-4401 Douglas, GA 912/384-4400 800/559-4019 Valdosta, GA 229/247-4495 800/283-2576

JAMES RIVER EQUIPMENT INC. Ashland, VA 804/798-6001 Fredericksburg, VA 540/898-8933 Manassas Park, VA 703/631-8500 Winchester, VA 540/667-9777 Charlotte, NC 704/597-0211 800/532-6797 Greensboro, NC 336/668-2762 800/632-0376 Mt. Gilead, NC 910/439-5653 800/692-9175 Salem, VA 540/380-2011

FLINT EQUIPMENT COMPANY Albany, GA 229/888-1212 Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Perry, FL 850/584-9200 Tallahassee, FL 850/575-5600 West Columbia, SC 803/794-9340 Simpsonville, SC 864/963-5835 Aynor, SC 843/358-5688 Asheville, NC 828/667-0176

INDUSTRIAL TRACTOR CO. Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Brunswick, GA 912/264-6161 Savannah, GA 912/964-7370 Ladson, SC 843/572-0400 Andrews, SC 843/221-4940 Walterboro, SC 843/539-1420

Page 48 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ce , a p s l l a m S

PROFESSIONAL

SHORING & SUPPLY Your Complete Rental Resource!

The Gehl 1640E Skid Loader was designed with quality in mind. There are few tasks this loader cannot handle.

BIG JOB

Rated capacity of 850 pounds and lift height up to 96 inches Super-compact 36-inch width with 5.70 x 12 tire option, or 42-inches with 8.50 x 12 KHDY\ GXW\ ÀRWDWLRQ WLUH RSWLRQ

steel trench shield

manhole shield

stone mizer

slide rail system

DON ALLISON EQUIPMENT, INC.

Power-view® lift arm provides strength, durability and excellent view of the tires and sides of the loader Universal quick-attach system speeds attachment changes SAHR (spring-applied, hydraulic-release) brake system responds quickly, holding the loader on any grade

xlap™ aluminum shield

build-a-box™ modular

hydraulic vertical shores

porta-tank™

ORLANDO Atlas Commerce Park Building 12 11128 Boggy Creek Rd Orlando, FL 32824 Office: 407-854-9949 Fax: 407-854-9917 Toll Free: 888-777-8307

233 Melville Road Arley, AL 35541 800-669-6450 205-387-1600 Fax: 205-387-1668

Other Supplies:

your complete rental resource p s s

p s s

TAMPA 5013 E. Broadway Ave. Tampa, FL 33619 Office: 813-248-2495 Fax: 813-248-2489 Toll Free: 888-777-8307

• • • • • • • •

road plate barrier walls pipe plugs tripod & winch harnesses electric blower/hose gas blower/hose manhole guard

Official Efficiency Production trench shielding & shoring equipment distributor

gehl.com

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

SEE YOUR BARGAIN AD IN COLOR.

The 2010 EZ Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 20 Horsepower Deutz Diesel Engine ............................... .....................................................$39,500 plus freight Other Screens Available 3-4 EB www.ez-screen.com • 866/745-5828

2009 IROCK Crusher RDS-15 Closed Circuit Crushing and Screening Plant. For more information Call Sean Donaghy at 330/931-9595 3-4

1990 Grove RT528C-28 Ton Rough Terrain Crane, Approx. 9159 Hrs, 28’-70’ Boom, Cummins Engine, PAT DS350G Load Moment Indicator Newly Painted, Richmond, VA........$$65,000 3 RM Atlantic Capital Companies, Inc. • 804/798-8840

ONLY $50 EXTRA FOR 2 INSERTIONS

Here ' s how the BARGAIN ADS Work: • Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum 17 word description plus contact and phone number. • Send Check for $95 with copy to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • The ad will run for two consecutive issues.

For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 49

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. BARBER GREEN BG210B • LOOKING FOR BARBER GREEN BG210B AND DBG245B ASPHALT PAVER Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– CAT 330CL 2003 2006 TO 4000 HRS 12/10 STICK AUX HYDS Contact: RICHARD Phone: 603 828-6100 Email: cmisold@myfairpoint.net –––––––––––––––––––––––––––––––– TORQUE CONVERTER REVERSER • WANTED:TORQUE CONVERTER REVERSER FOR A JOHN DEERE 310D WITH 4 X 4 TURBO Contact: RICHARD PIENDAK Phone: 302-328-5828 Fax: 302-328-5949 Email: richpaving@aol.com –––––––––––––––––––––––––––––––– CAT 14M MOTORGRADER Contact: SCOTT HAWSEY Phone: 770.652.1443 Fax: 678.941.1210 Email: scott.nasser@yahoo.com –––––––––––––––––––––––––––––––– CATERPILLAR 120H MOTORGRADER • WE HAVE AN IMMEDIATE NEED FOR ONE CAT 120H, 135H, 12H OR 140H MOTORGRADER. THE MACHINE MUST BE ORIGINAL PAINT AND LOCATED IN THE USA OR CANADA!!!! THE MACHINE REALLY NEEDS TO HAVE AN EROPS CAB ALONG WITH A SCARIFIER OR REAR RIPPER HOWEVER WE WOULD LISTEN TO AN OFFER FOR A MACHINE WITH NO PLOW AND MIGHT CONSIDER A MACHINE WITH A CANOPY. OUR PRICE LIMIT OF $70,000. DEPENDS ON THE SIZE OF THE MACHINE, THE YEAR MODEL AND HOURS. PLEASE OFFER WHAT YOU HAVE. Contact: WENDELL CAIN Phone: 770-381-8984 Fax: 770-381-6977 Email: wendell@cainandtodd.com –––––––––––––––––––––––––––––––– KOMATSU OR CATERPILLAR MOTOR GRADER Contact: MATT STRINGER Phone: 403-327-3681 Email: matt@hwequipment.com –––––––––––––––––––––––––––––––– (2) JCB 550 TELEHANDLERS Contact: FRANK W. FORST Phone: 402-330-0555 Fax: 402-333-4021 Email: fwforst@gmail.com –––––––––––––––––––––––––––––––– TRI AXLE ROAD TRACTOR • PREFERABLY 10 YR OLD PETE,MACK REASONABLE MILAGE FOR AGE Contact: PAT MCLAUGHLIN Phone: 804 513 1960 Fax: 800 405 9991 Email: pmclaughlin@harbordredge.com ––––––––––––––––––––––––––––––––

CONCRETE SAW • 2 LARGE CONCRETE SAWS, ABLE TO CUT 10" OF CONCRETE FLATWORK Contact: FRANK Phone: 909-229-3600 Fax: 951-845-6997 Email: forthncons@verizon.net –––––––––––––––––––––––––––––––– LOOKING FOR CAT 140G GRADERS • PLEASE SEND YOUR OFFERS WITH SERIAL NO, PICTURES, DETAILS OF 140GS WITH 14 BLADE AND REAR RIPPERS. THANKS Contact: ATHER A. SIDDIQUI Phone: +92-333-2240692 Email: ather.cat@gmail.com –––––––––––––––––––––––––––––––– CAT WHEEL LOADER WHOLESALE ONLY PLEASE! • WE ARE LOOKING FOR WHOLESALE CAT WHEEL LOADERS. WE HAVE A BUYER THAT HAS ASKED TO PURCHASE AN EXTENSIVE AMOUNT OF EQUIPMENT FOR THEM, BUT MUST BE IN LINE WITH TODAY WHOLESALE PRICING Contact: ROB LEWIS Phone: 813-842-3781 Email: roblewis78@yahoo.com –––––––––––––––––––––––––––––––– LOOKING FOR GOOD USED 14G Contact: MARK Phone: 336-215-5388 Email: mark_snow34@yahoo.com –––––––––––––––––––––––––––––––– TRANSFER TRAILERS • 45 HEAVY DUTY WALKING FLOOR TRAILERS IN GOOD CONDITION, NEED TWENTY MORE OR LESS ALIKE. Contact: PAUL LEAS Phone: 803-920-0693 Email: pdleas@gmail.com –––––––––––––––––––––––––––––––– CAT M318 OR M320 WHEEL EXCAVATOR • LATE MODEL UNIT MUST BE IN GOOD CONDITION WITH AUXILIARY HYDRAULIC. PLEASE FAX OR E-MAIL INFORMATION / DETAILS / PRICING. Contact: VINCENT Phone: 860-664-8042 Fax: 860-664-9175 Email: vneri@occllc.com –––––––––––––––––––––––––––––––– STICK FOR CX210 CASE EXCAVATOR Contact: DON Phone: 573-380-7700 Fax: 573-683-2600 Email: dmedlin@medlineq.com –––––––––––––––––––––––––––––––– BHL CAT 420D 4X4 • WANTED TO BUY BHL - CAT 420D 4X4, CAB, E-STICK, 2,000-4,000HRS. IN GOOD CONDITION Contact: ERIC Email: gotdirt627@yahoo.com –––––––––––––––––––––––––––––––– CATERPILLAR 994 Contact: HERCO EQUIPMENT Phone: 229-344-4235 Email: hercoeq@bellsouth.net –––––––––––––––––––––––––––––––– NEED WHOLESALE CAT WHEEL LOADERS AND MOTORGRADERS Contact: DAVE SCHEER Phone: 610-544-3399 Email: dave@scheerbrothers.com ––––––––––––––––––––––––––––––––

TOW BEHIND VIBRATORY PADFOOT ROLLER Contact: BILL | Phone: 612-812-1714 Email: bpdeutsch@aol.com –––––––––––––––––––––––––––––––– 2 TAILGATES FOR VOLVO A25 OR A30 Contact: DAVE WILD Phone: 770-966-9056 Fax: 770-966-9035 Email: dave@globalequipmentexporters.com –––––––––––––––––––––––––––––––– TAILGATE FOR JD250C OR BELL ADT • MECHANICAL TAILGATE ASSEMBLY FOR JD 250C OR BELL ADT. PART OR COMPLETE IN GOOD CONDITION. Contact: PHIL SHAFFER Phone: 724 331 9102 Fax: 724 995 8028 Email: pshaffer324@comcast.net –––––––––––––––––––––––––––––––– NEED 1 1996 TO 1999 CAT 14H Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– 2005 D6R LGP 5000 HOURS OR LESS LOW PRICE Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– EXCAVATOR Contact: RICHARD Phone: 603 828-6100 Fax: 603 430-2119 Email: cmisold@mtfairpoint.net –––––––––––––––––––––––––––––––– VOLVO L90 & L120 C,D AND E MODELS Contact: IAN RITCHIE Phone: 00441592 202918 Email: ian.j.ritchie@googlemail.com –––––––––––––––––––––––––––––––– 3054 ENGINE Contact: KEN ELIA Phone: 215-852-9704 Fax: 215-535-5973 Email: elia2045@comcast.net –––––––––––––––––––––––––––––––– D9L WITH RIPPER CONTRACTOR ONLY Contact: JEAN MAURICE BOUTIN Phone: 1-450-346-8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– TEREX DOZER 8220B • NEED TWO GOOD SPROCKETS Contact: JIM ROWE Phone: 518-651-6006 Email: skywolf371@yahoo.com –––––––––––––––––––––––––––––––– CAT 966F GP BUCKET • GENERAL PURPOSE BUCKET FOR A CAT 966F. Contact: PAMELA Phone: 229 924.0035 Email: pamela@dozers.com ––––––––––––––––––––––––––––––––

CAT 330CL DITCHING OR GRADING BUCKET • WIDE DITCHING BUCKET FOR A 330CL. THE WIDER THE BETTER. ANYTHING CONSIDERED FROM 8 TO 10. Contact: KEVIN Phone: 989-646-0009 Fax: 989-876-8656 Email: lynchexcavating@chartermi.net –––––––––––––––––––––––––––––––– MUFFLER Contact: G MATTHEWS Phone & Fax: 907 883 5684 Email: mbmining@aptalaska.net –––––––––––––––––––––––––––––––– I AM LOOKING FOR A USED FRONT END LOADER FOR A ZETOR TRACTOR 60 HORSE. Contact: SMITH Phone: 575-513-0417 Email: longlivecowboys.jackson4@yahoo.com –––––––––––––––––––––––––––––––– HITACHI EX50URG • FINAL DRIVE Contact: DAVID SMITH Phone: 636-359-6346 Fax: 573-684-2285 Email: tammee@socket.net –––––––––––––––––––––––––––––––– KUBOTA BX25 Contact: BILL Phone: 630-554-9068 just e-mail w/pictures please Email: wjkeck@att.net –––––––––––––––––––––––––––––––– WOOD CHIPPER DIESEL • WOOD CHIPPER BANDIT 250 USED IN WA 98245 Contact: VICTOR BOEDE Phone: 360-376-5078 Email: victorboede@hotmail.com –––––––––––––––––––––––––––––––– SKID STEER | MIN 60 HP SKID STEER WHEEL OR TRACK, CAB, HEAT, SUSPENSION SEAT, HIGH FLOW, 1000HRS. OR LESS 2007,2008,2009 MODELS Contact: DON BRENENGEN Email: don@brenengen.com –––––––––––––––––––––––––––––––– LIMA 2400 OR MANITOWAC 4600 CRAWLER CRANE Contact: BILL CYFORD Phone: 410-355-2222 Fax: 410-355-2936 Email: bcyford@mcleancont.com –––––––––––––––––––––––––––––––– CAT 966H Contact: STEVE Phone: 18194496154 Email: info@stosik.ca –––––––––––––––––––––––––––––––– CAT 325BL966H Contact: STEVE STOSIK Phone: 18194496154 Fax: 1-819-449-3676 Email: info@stosik.ca –––––––––––––––––––––––––––––––– 446D OR CASE 590 SUPER M | Contact: MICK FIELDS Phone: 352-527-0072 Email: solutions@fieldco.biz ––––––––––––––––––––––––––––––––

950B, 950E WHEEL LOADER • WHEEL LOADER CAT SHOULD BE IN GOOD SHAPE AND IN WHOLE SALE PRICE Contact: JUNADI Phone: 00971508075025 Fax: 0097165439227 Email: findiron@gmail.com –––––––––––––––––––––––––––––––– CAT 140G/YEAR 1975 TO 1995 • PLEASE EMAIL ME DETAILS, PRICE HOURS,CONDITION & PHOTOS. Contact: HOWARD YOUNG Phone: (626)688-9499 Fax: (626)574-5001 Email: chatreeyoung@gmail.com –––––––––––––––––––––––––––––––– FORKLIFT Contact: JAMES E. MCCORMICK Phone: 615-828-3221 Fax: 615-865-7800 Email: jemnte@comcast.net –––––––––––––––––––––––––––––––– KOMATSU MOTOR GRADER GD 511 Contact: ANIL TODI Phone: 919810017750 Fax: 919810017750 Email: anilkhazana7777@yahoo.com –––––––––––––––––––––––––––––––– CAT IT38 W/3RD VALVE 19981999 Contact: GENE Phone: 302-836-0414 Fax: 302-836-6977 Email: ggiuliani@jjid.com –––––––––––––––––––––––––––––––– D7G GROUSER PADS Contact: ROB MITCHELL Phone: 417-258-2212 Email: robs.girl25@hotmail.com –––––––––––––––––––––––––––––––– USES DITCH WITCH 752 LOCATOR OR SIMILAR Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Fax: 724-887-4899 Email: lewequip@gmail.com –––––––––––––––––––––––––––––––– NEED TO BUY BULL 375A5 2000 OR 2001 Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– CEMENT PIG Contact: JOHNS AG SERVICE Phone: 515-332-1883 Fax: 515-332-5855 Email: johnsag@goldfieldaccess.net –––––––––––––––––––––––––––––––– 4IN1 LOADER BUCKET Contact: MIKE GAUSDEN Phone: 602-225- 9500 Fax: 602-231-8590 Email: mgausden@huntconstructiongroup.com –––––––––––––––––––––––––––––––– NEED TO BUY LOADER 821B CASE RUN OR NOT Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– ROUGH TERRAIN FORK LIFT Contact: DAVE KING Phone: 615-789-0062 Fax: 615-789-0007 Email: hilltopstructures@emypeople.net ––––––––––––––––––––––––––––––––

KOMATSU OR KOBELCO PC300 IN THE LOW 20S Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– EAGLE 1200 CLOSED CIRCUIT CRUSHING PLANT, NO DEALERS Phone: 724-944-5569 –––––––––––––––––––––––––––––––– COMPRESSED EARTH BLOCK MACHINE Contact: RON LEMON Phone: 1-417-818-3121 Email: lemonacres@gmail.com –––––––––––––––––––––––––––––––– WHEEL LOADER WA30 OR WA40 (KOMATSU) Contact: HAMED AHMED SHAWKY MAKRAM Phone: 0020123240580 Fax: 002034297060(107) Email: darelhandasa@live.com –––––––––––––––––––––––––––––––– HAMMER Phone: 914-494-6478 Fax: 845-207-9067 Email: apexdorian@hotmail.com –––––––––––––––––––––––––––––––– CASE 586G WANTED 2 WHEEL DRIVE, OROPS Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– 330CL DITCH CLEAN OUT BUCKET • 84" TO 96" WIDE CLEAN OUT BUCKET FOR CAT 330CL Contact: KEVIN Phone: 989-646-0009 Fax: 989-876-8656 Email: lynchexcavating@chartermi.net –––––––––––––––––––––––––––––––– USED DREDGE • USED DREDGE FOR SAND AND GRAVEL. 300-400 TPH 70 DEEP GOOD CONDITION Contact: BEAUFORD MULLINS Phone: 260-497-0500 Fax: 260-490-8217 Email: beauford@kortebros.com –––––––––––––––––––––––––––––––– I AM LOOKING TO BUY D9N WITH RIPPER CONTRA Contact: JEAN MAURICE BOUTIN Phone: 1-450-346-8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– ATLAS COPCO XAS75 COMPRESSOR, NEED MOTOR COUPLER HAS DUETZ ENGINE Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Fax: 724-887-4899 Email: lewequip@gmail.com –––––––––––––––––––––––––––––––– CAT 140G • ANY YEAR BETWEEN 1980 TO 1995. PLEASE EMAIL ME DETAILS INCLUDING HOURS WITH PHOTOS. Contact: PAMELA STEPP Phone: 229.924.0035 Email: pamela@dozers.com ––––––––––––––––––––––––––––––––

Page 50 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS AERIAL LIFTS

BUCKETS

Manlifts

Excavator Bucket

All Makes & Models Rental, Parts, Service, Training

HUNDREDS OF NEW & USED BUCKETS, Nationwide Locator service, Sample “New Bucket” prices ...

Modern Equipment Sales & Rental 800/445-4381

AIR COMPRESSORS Compressors Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

Excavators (30,000-40,000 lb) 24” $2,200, 30” - $2,400, 42” $2,600, 48” - $2,900 Excavators (40,000-55,000 lb) 24” $2,400, 30” - $2,600, 42” $2,900, 48” - $3,100 Excavators (55,000-65,000 lb) 24” $2,600, 30” - $2,800, 42” $3,100, 48” - $3,300

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 2005 John Deere 850J LGP, #17478, push beams with Rockland rake, sweeps and screens, good condition, 3632 hours.........................$142,300. Industrial Tractor Co. Inc. 904-296-5000 2001 John Deere 700H, 30” pads, lube rails, 132” 6-way blade, limb risers, rear & side screens, excellent factory warranty, 1500 hrs ...$121,000 Industrial Tractor Co. Inc. 843/572-0400 NH Construction Equipment New & Used Parts & Service

Call the Grappler at 856/778-4070

Modern Equipment Sales & Rental 800-445-4381

COMPACTION EQUIP. ASPHALT EQUIPMENT Misc. Compaction Equip. Asphalt Rollers 2005 Cat CB224E, 160 hours .....................................$22,900 2004 Cat CB224E, 946 hours .....................................$19,900 2004 Cat CB534DXW, 832 hours ..........................$75,000 2005 Cat CS563E, 287 hours .....................................$75,000 2005 Cat CS563E, 1,778 hours .....................................$75,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

ATTACHMENTS Hammers 2003 Cat H160............$55,000 2004 Cat H160............$55,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

BORING EQUIPMENT Trenchless Technology TERRA PIERCING TOOLS, DIRECTIONAL DRILLS Sales, service, rebuilt units. 26 years a dealer. Fagan’s Lehigh Equipment 610/759-6829 800/458-5238

2004 CAT 836G, 7159 hours ...................................$355,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

CONCRETE EQUIPMENT Misc Concrete Equipment CONNCRETE SLIP FORM PAVER CMI 250 Slip Form Machine Very Clean! $40,000 Call 318-346-4385

CRAWLER TRACTORS Crawler Tractor 1997 John Deere 550G, LGP, open ROPS, PAT blade, new paint, average condition, 6724 hours...................$25,000

2004 4551 2004 3406

Cat D6RXLII, hours.................$139,000 Cat D8RII, hours.................$369,300 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

2003 Deere 750C, LGP, PAT blade, open ROPS, screen, sweeps, hang in rake, good condition, 4560............$64,000. 2004 Deere 700H, LGP, cab with A/C, 132’’ PAT blade, 30’’ pads, sweeps, screens, new hang on rake, good ocndition, 5244 hours..................$62,000. Industrial Tractor Co. Inc. 904-296-5000 2006, John Deere 4320, 43 hp, 4wd, sunc shuttle trans, R-4 tires, 400CX JD loader w/AT bucket, excellent condition, 150 hours...........................$23,900. Bobcat of Lenoir 888/758-5506

EXCAVATORS

NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2007 Takeuchi TB1140, s/n 51400893, 32,000 #, 18’ dig depth, cab, heat, A/C, quick attach, bucjet, 885 hours.......... ....................................$97,500. 2007 Mustang ME3803ZT, s/n AE02237, 7700#, 11’ dig depth, cab, heat, A/C, counterweight, bucket, 681 hours........$34,995.

FORESTRY EQUIPMENT

Skid Steer Loaders

Logging Equipment

2007 JCB 180T, canopy model with Servo Controls, GP bucket, set of forks/ frame 48’’. Pictures available, mint condition, 10 hours...................$32,000.

1996 Caterpillar 320L stroke delimber, 31” pads, Balderson attachment, good condition, 7157 hours ...............$92,000 Five Star Equipment Inc. 607/775-2006

FORKLIFTS Industrial Forklifts Gradall/Lull Sales, Service, Training

Call Erik Star Equipment 800-791-9318

Modern Equipment Sales & Rental 800/445-4381

2006 Cat 303.5CCR, 698 hours.....................$39,900 2003 Cat 325CL, 2,998 hours................$108,300 2005 Cat 330CL, 2,366 hours................$199,000 2003 Cat 345BL, 4,941 hours................$199,000

GENERATORS

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Mini Excavators NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 Sell Your Bobcat to Us We Buy Used Bobcat Equipment Loader Services & Equipment 205/320-1000

Industrial Tractor Co. Inc. 904-296-5000

Hydraulic Excavators

1996 John Deere 650G LGP, #15401, sweeps, rear screen, 120’’ blade, fair condition, 7596 hours...........................$37,500. 2006 John Deere 650J LGP, #17302, full forestry package, sweeps, screens, root rake, 121’’ blade, good condition, 1317 hours.................$73,500.

2007 John Deere 120C, #17395, 28’’ pads, cab with A/C, 9’11’’ arm, aux. hyd., 36’’ Helac bucket, very good condition, 1099 hours ....................................$76.900.

2005 Deere 50D, 36’’ bucket, rubber tracks, push blade, very good condition, 1040 hours ..............................$32,000.

Industrial Tractor Co. Inc. 904-296-5000

Generators & Gen Sets For Sale or Rent All Makes & Models Modern Equipment Sales & Rental 800/227-2525

LANDSCAPE EQUIP. Misc. Landscape Equip. 2004 Kubota L3430, open ROPS, rear hitch, AWD, 540 PTO, good condition, 1158 hours....................$18,500 Industrial Tractor Co. Inc. 904-296-5000

Track Loaders Backhoe Loaders 2005 Cat 420D, 972 hours .....................................$49,000 2006 Cat 420EIT, 773 hours .....................................$65,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729 1989 John Deere 410C, open ROPS, 2 wheel drive, 24’’ bucket, GP loader bucket, fair condition, 2600 hours .........$13,875. Industrial Tractor Co. Inc. 904-296-5000

Farm-Rite Inc. 908/625-0697 Cat 287B, s/n ZSA00581, 1141 total hours...................$22,000. S S & B Construction 770-866-7086 alito77@yahoo.com Serious Inquiries Only Please Sell Your Bobcat to Us We Buy Used Bobcat Equipment Loader Services & Equipment 205/320-1000 2003 Bobcat S185, s/n 519036163, 56 hp Kubota engine, 1850# cap., hand/foot controls, 67’’ tooth bucket, 1382 hours...........................$15,995.

Call Erik Star Equipment 800-791-9318

Wheel Loaders NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2006 Cat 904B, 3,456 hours .....................................$29,000 2005 928GZ, 2519 hours .....................................$87,300 2006 Cat 938GII, 2,552 hours ...................................$119,000 2006 Cat 938GII, 441 hours ...................................$129,000 2006 Cat 972H, 3,180 hours ...................................$229,000 2003 Cat 980G, 7251 hours ...................................$199,000 1998 Cat 990.............$599,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 51

2003 JCB 407B Compact, cab, heat, A/C, radial tires, limited slip trans with 1.0 cu yd GP bucket and set of F/F.Good condition Pictures available, 2600 hrs......................$31,500. Farm-Rite Inc. 908/625-0697

Track Loaders 2005 Mustang MTL25, s/n 21501849, 110 HP, cab, heat, A/C, 1200 hours..........$34,500.

Call Erik Star Equipment 800-369-2215 2006 Cat 953C, 1004 hours ...................................$135,000 Cat 953C, 3577 hours ...................................$115,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

MISCELLANEOUS Misc NEW PARTS Hyundai - Mustang Okada - Sakai Yanmar Call: John Stevens or Jeff Brooks G & H Services, Inc. 973/383-3370 Fax: 373/383-5756

Service We Service What We Sell! Warranty, Maintenance and More! Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors Norris Sales Company 610/279-5777

OIL SPILL CLEAN-UP Oil Spills Oil Eating Bacteria, Remediates water, soil “in place.” Use in fueling areas, shop floors, hydraulic hose breaks. OSHA and DEP preferred method. Fagans’ Lehigh Equipment 800/458-5238

PARTS Tractor Parts NEED CASE DOZER TRANSMISSION PARTS?

We supply new & used transmission and differential parts for Terrtrac GT, 200, 300 Series. Case 310, 350. SERVICES AVAILABLE: Transmission rebuilding, steering band relining. Full line of Oliver-Cletrac parts stocked. Zimmerman Oliver-Cletrac Ephrata, PA 717-738-2573 Fax: 717-733-3520 www.olivercletrac.com

Undercarriages

JOHN DEERE USED PARTS All Makes In Stock! Nationwide Availability 1-800-344-3205 Industrial Tractor Co., Inc. Jacksonville, FL VISA/MC BOBCAT - All Models New and Used Bobcat Parts Shipped to Your Door! Call 1-800-753-2879 For Best Prices

Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

BOBCAT PARTS New and Used, Low Hour Equipment Loader Services & Equipment Call 1-800-753-2879

FREE QUOTES Norris Sales Company

RECYCLING EQUIPMENT

Additional Services Available

800/547-RENT (7368) CAROLINA TRACTOR 2690 Salisbury Highway Statesville, NC 28677 800-277-1212 Ext 3500

610/279-5777 Construction

SCRAPERS Motor Scrapers

Sales & Rental 800/445-4381 Construction & Industrial Equipment Rentals Compaction, Excavating, Safety, Loaders, Landscaping

6S8800MT Link Assy., (2), 36 section, dry, master pin, 9/16’’ bolt........................$849.00 Ea. 6S605MT Link Assy., (4), 36 section, dry, split master, 9/16’’ bolt........................$874.00 Ea. 6S9066MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt ...........$1,099.00 Ea. 6Y1339MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt ...........$1,105.00 Ea. 3T6705MT Link Assy., (2), 37 section, SALT, split master, 9/16’’ bolt............$1,150.00 Ea.

Komatsu D30A, D31A, D31B, D37E, D31S, D31P... 6.0126 Pitch TR1103211292 Track Pad, (118), 14’’ single grouser, 14mm bolt................$7.39. Ea. TR1113000260 Top Roller (2), complete w/shaft....$82.00. Ea. TR1113000281 Bottom Roller (9), double flange.......... .............................$103.00. Ea.

BEST DEALS Bohringer portable impactor ...................................$129,000 Finlay 393 3-in-1 screener ... .....................................$99,000 8 x 4 Shop Built portable screener. .....................$44,500 Portable Simplicity 6 x 20 Triple Deck .................$95,000 Portable Cedarapids 2540 Jaw, excllent .............$166,000 Portable 6 x 4 Mark II..$38,500 Various conveyors, stackers & idlers ...........................$6,000+ Mixing Plant with 28 x 6 drum .....................................$12,500 Sand/Gravel washing plant ..........................................POR

610/279-5777

Operator Training

SANDBLASTING & PAINTING

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Classified...2 Insertions...95¢ Per Word Use the form below to place a classified ad in the Construction Equipment Guide. It could bring the inquiry for which you are looking.

One Word HEADING (Category to place listing):

Each

Block

RENTALS Rental Construction & Equpment & Supplies for the “Professionals”

CLASSIFIED RATES: 95¢ Per Word. Minimum $30.00 (30 words or less). Ad runs for two insertions - no changes in second insertion. Initials count as separate words. Telephone numbers including Area Code count as one word. Please indicate the appropriate heading you wish your ad to be listed under. Payment must be made in full for your ad to run. For just an additional $20 your ad can be posted on our online searchable database for 30 days - use your credit card or send payment to Construction Equipment Guide. CARD MEMBER’S NAME _________________________________________________COMPANY NAME ___________________________________________________

Daily - Weekly - Monthly & Long Term Rentals Available

Miscellaneous Parts

Stone, Wacker, Honda, Gehl, JLG to name a few .....

Loader Services & Equipment Call 1-800-753-2879

TRAINING

SAND SCIENCE INC. 843/525-6140

G & H Services, Inc. 973/383-3370 973/390-7394 Cell Fax: 373/383-5756

BOBCAT MULCHING ATTACHMENT SALE! Land Clearing Mulcher Sale Like New!

Misc Trucks 2004 Cat 735, 4,035 hours ...................................$249,000 2005 Cat 735, 3,738 hours ...................................$269,000 2006 Cat 740, 3,320 hours ...................................$305,000 1994 Cat D350D, 20,412 hours ...........................$49,000

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Norris Sales Company

Sandblasting/Painting

TRUCKS

1998 Cat 627F, 9,740 hours. ...................................$299,000 1998 Cat 627F, 10,307 hours ...................................$299,000

Screening Equipment Caterpillar D3, D3B, D3C, D4C, 931...6.125 Pitch

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

Modern Equipment

High Lifts, Traffic Control, NEW UNDERCARRIAGE PARTS

Equipment Sandblasting, Painting & Refinishing

Now in PA & NJ

Equipment Rentals Loader Services & Equipment 205/320-1000

WE’RE HERE TO MAKE THE OLD LOOK NEW AGAIN!

STREET______________________________________________________________________PHONE NO. _________________________________________________ CITY _______________________________________________________________________STATE ___________________________ ZIP __________________________

Norris Sales Company 610/279-5777 www.norrissales.com Daily - Weekly - Monthly Competitive Rates

Check Enclosed

VISA

MASTERCARD

AMERICAN EXPRESS EXP. DATE

CARD NUMBER

SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE 1-800/523-2200 FAX 215/885-2910 470 Maryland Drive • Fort Washington, PA 19034 Email: sales@cegltd.com

Page 52 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ February 10, 2010 â€˘ Page 53

Manheim Imperial Lakeland, FL 800-494-7253 Manheim-Imperial.com Next Sale Feb. 19th

Manheim Harrisonburg Harrisonburg, VA 540-434-5991 Manheim-Harrisonburg.com Next Sale Feb. 27th

Open to Business Owner

877-704-*/'0 t .BOIFJN)FBWZ5SVDL"VDUJPOT DPN

AIMâ€™s HDT40 Universal Mechanical Thumbs Waste No Motion

For more information, call 800/803-3365 or visit www.aimattachments.com.

AIM Attachmentsâ€™s HDT40 universal mechanical excavator thumb features a tough, AR400 steel structure built for a tight fit to work in coordination with any bucket â€” without wasted motion. AIM HDT48 thumbs are 12 in. (30.5 cm) wide and 40 in. (101.6 cm) long and are designed to fit backhoes loaders and excavators. Standard features include oversized alloy steel pins, specially designed AR400 steel tines with serrated edges, and a mounting bracket with three working positions. HDT48 thumbs have been engineered to fold up tight and make storing a fast and simple process.

â€œAuctionâ€? Tampa Machinery Auction, Inc. Monthly Auctions the second Saturday of each month. Specializing in government surplus items. Tampa, Florida February 13th, 2010, March 13th, 2010, and April 10th, 2010. Items Available for Preview Monday Through Friday 8am to 5pm.

Featuring Items from State of Florida Division of Forestry

Preview complete auction inventory, with pictures and descriptions, at our website:

www.tmauction.com Call us today for more information! (813) 986-2485 Tampa Machinery Auction, Inc.

11720 U.S. Hwy 301 N. Thonotosassa, FL 33592 E-Mail: info@tmauction.com

AB135/AU871

Page 54 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com Phone: 315-633-2944 • Dallas, TX Wed., February 24, 2010 For: Late Model Construction, Aerial, Forklifts, Support Equipment, Trucks & Trailers • Greensboro, NC Fri., February 26, 2010 For: Very Large Complete Liquidation Earthmoving, Support Equipment, Trucks & Trailers • Syracuse, NY Thurs., March 4, 2010 For: Complete Liquidation of Major Trucking Company. Truck Tractors, Trailers, Support Equipment • Queretero, Mexico Fri., March 5, 2010 For: Large Construction, Aerial Equipment, Support Equipment & More. • Sacramento (Galt), CA Sat., March 6, 2010 For: Large Rental Return Auction of Late Model Bobcat, Takeuchi, JCB Compact Construction and Support Equipment • Cleveland, OH Sat, March 13, 2010 For: Complete Liquidation Dump Trucks, Truck Tractors, Support and Construction Equipment • Atlanta, GA Fri, March 19, 2010 For: Large Rental Return Auction of Large Quantity of JCB Hyd. Excavators, Telescopics, Aerial Lifts, Backhoes & Support Equipment • Houston, TX Wed., March 24, 2010 For: Rental Fleet Construction, Support, Aerials, Forklifts, Trucks & Trailers • Atlantic City, NJ Thurs.-Sat, March 25-27, 2010 For: Annual 3 Day Construction, Aerial, Forklift, Support, Truck & Trailer Auction • Monterey, Mexico Fri., April 9, 2010 For: Large Complete Liquidation of Construction, Aerial Equipment, Support and More • Scranton, PA Sun., April 11, 2010 For: Late Model Truck Wreckers, Truck Tractors, Van Trailers, Enormous Amounts of Take Out Engines, etc • Manassas, VA Fri., April 16, 2010 For: Late Model Cat & John Deere Earthmoving Equipment, Trucks & Trailers • Bangor, ME Fri., April 23, 2010 For: Late Model Construction, Aerial Lift, Forklift, Truck & Trailer Auction

• Aguascalientes, Mexico Fri., April 23, 2010 For: Large Construction, Aerial Equipment, Support Equipment & More Auction. • Canastota, NY Sun., May 9, 2010 For: Large Compact, Utility, Support Equipment, Plus Construction, Aerials & Forklifts, Support Equipment Auction • Newark, NJ DATE TBA For: Rental Fleet Construction Equipment, Aerial Lifts, Trucks & Trailers

Coming Auctions • Geelong, VIC, Australia March 18, 2010 • Caorso, Italy March 18, 2010 • Montreal, QC, CAN March 18-19, 2010 • Minneapolis, MN March 19, 2010 • Albuquerque, NM March 23, 2010

• Middletown (Florida), NY DATE TBA For: Rental Fleet Construction Equipment, Support, Aerial Lifts, Trucks & Trailers

• Statesville, NC March 23, 2010

• Detroit, MI DATE TBA For: Complete Liquidation of Construction and Support Equipment.

• Hartford, CT March 24, 2010

RITCHIE BROS. AUCTIONEERS www.rbauction.com Phone: 402-421-2631 • Tipton, CA February 12, 2010 • Rome, Italy February 13, 2010 • Orlando, FL February 15-20, 2010 Annual Florida Auction • Moerdijk, The Netherlands February 24-26, 2010 • Ft. Worth, TX February 25-26, 2010 • Los Angeles, CA March 1-2, 2010 • Dubai, UAE March 1-3, 2010 • Toronto, ONT, CAN March 2-3, 2010 • Olympia, WA March 4-5, 2010 • Polotitlan, Mexico March 5, 2010 • St. Aubin Sur Gallion, France March 5, 2010 • Sacramento, CA March 8-9, 2010 • Edmonton, AB, CAN March 10-12, 2010 • Ocana, Spain March 11-12, 2010 • Chicago, IL March 11-12, 2010 • Brisbane, QLD, Australia March 16, 2010

• Chilliwack, BC, CAN March 24, 2010

• Houston, TX March 24, 2010 • London, ONT, CAN March 25, 2010 • Atlanta, GA March 25-26, 2010 • Jackson, MS March 29, 2010 • Kansas City, MO March 30, 2010 • Regina, SK, CAN March 30, 2010 • Grand Cayman Islands March 30, 2010 • Northeast, MD March 30-31, 2010 • Boise, ID April 13, 2010 • Grand Prairie, AB, CAB April 14-15, 2010

INSIGHT AUCTIONEERS www.insightauction.com Phone: 863-386-1225 • Sebring, FL Saturday, March 13, 2010 • Sebring, FL Saturday, May 15, 2010 • Sebring, FL Saturday, July 17, 2010 • Sebring, FL Saturday, September 18, 2010 JOSEPH FINN CO., INC. www.josephfinn.com Phone: 617-964-1886 • Holbrook, MA Thurs., February 25, 2010 For: Loaders, Boom Crane, Grader, Excavator, Dump Trucks, Trailers, Plows, Skid Steer GLOBAL FORCE AUCTION GROUP www.gforceauction.com Phone: 877-631-0650 ¥ West Friendship, MD Sat., February 27, 2010 For: Maryland Contractor and Truck Auction IRAY AUCTIONS www.iraymn.com Phone: 320-968-7230

• Moncofa, Spain April 15, 2010

• Foley, MN Fri., March 5, 2010

• Istanbul, Turkey April 17, 2010

• Portage, WI Fri., April 16, 2010

• Salt Lake City, UT April 22, 2010

• Foley, MN Fri., June 4, 2010

• Detroit, MI May 5, 2010

• Portage, WI Fri., July 16, 2010

• Pittsburgh, PA May 20, 2010

• Foley, MN Fri., September 17, 2010

• Meppen, Germany June 8, 2010 BLACK WARRIOR AUCTION www.blackwarrioreq.com Phone: 205-752-7800 • Tuscaloosa, AL Sat., March 6, 2010 For: Construction Equipment

• Nashville, TN March 16, 2010

DEANCO AUCTIONS www.deancoauction.com Phone: 601-656-9768

• Denver, C March 16-17, 2010

¥ Philadelphia, MS Wed. - Fri., March 24-26, 2010

• Columbus, OH March 17, 2010

¥ Philadelphia, MS Wed. - Thurs., May 26-27, 2010

• St. Louis, MO March 18, 2010

¥ Philadelphia, MS Thurs., July 15, 2010

• Portage, WI Fri., October 15, 2010 • Foley, MN Fri., December 3, 2010 IRON PLANET AUCTIONS www.ironplanet.com Phone: 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • Thurs. February 11, 2010 For: Construction Equipment • Thurs.-Fri. February 25-26, 2010 For: Construction Equipment

LONE STAR AUCTIONS www.lonestaronline.com Phone: 817-740-9400 • Austin, TX Sat., February 20, 2010 For: State of Texas: Heavy Equipment & Vehicles MANHEIM HEAVY TRUCK & EQUIPMENT AUCTIONS www.manheimheavy truckauctions.com Phone: 800-856-6107

• Tampa, FL Sat., June 12, 2010 • Tampa, FL Sat., July 10, 2010 • Tampa, FL Sat., August 14, 2010 • Tampa, FL Sat., September 11, 2010 • Tampa, FL Sat., October 9, 2010 • Tampa, FL Sat., November 13, 2010

• Lakeland, FL Fri., February 19, 2010 For: Late Model Construction Equipment, Trucks & Trailers

• Tampa, FL Sat., December 11, 2010

• Harrisonburg, VA Sat., February 27, 2010 For: Late Model Construction Equipment, Trucks & Trailers

THOMPSON AUCTIONEERS wwwthompsonauctioneers.com Phone: 937-426-8446

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com Phone: 860-642-4200 • Franklin, CT Thurs. — Sat., February 8-10, 2010 For: Trucks, Trailers, Construction & Earthmoving Equipment, Crushing & Screening, Support Equipment

• Piqua, OH Thurs., February 11, 2010 For: Lavy Concrete Construction UTILITY AUCTIONS www.utilityauctions.net Phone: 302-530-9103 ¥ Wilmington, DE Fri., February 26, 2010 For: Construction, Utility & Forestry Auction

RITCHASON AUCTIONEERS INC. www.ritchason.com Phone: 800-806-3395

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com Phone: 760-731-7760

• Lebanon, TN Sat., March 13, 2010 For: 21st Annual Spring Auction

¥ Perris, CA Fri., February 12, 2010 For: Construction Equipment

• Lebanon, TN Sat., June 19, 2010 • Lebanon, TN Sat., September 18, 2010 • Lebanon, TN Sat., December 11, 2010 SAPERSTEIN CO. AUCTIONEERS & APPRAISERS www.pesco.com Phone: 800-660-6553 • Holbrook, MA Thurs., February 25, 2010 For: Construction Equipment, Trucks & Trailers TAMPA MACHINERY AUCTION, INC. www.tmauction.com Phone: 813-986-2485 • Tampa, FL Sat., February 13, 2010 • Tampa, FL Sat., March 13, 2010 • Tampa, FL Sat., April 10, 2010 • Tampa, FL Sat., May 8, 2010

¥ Larchwood, IA Sat., March 27, 2010 For: Construction Equipment WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com Phone: 800-443-9580 ¥ Romney, W VA Fri., March 6, 2010 For: South Branch Construction ¥ York Springs, PA Fri., March 12, 2010 For: Southern PA Contractors Auction ¥ New Freedom, PA Fri., March 18, 2010 For: Farm Equip Auction ¥ Frederick, MD Fri., April 23, 2010 For: MidAtlantic Contractors Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com Phone: 419-865-3990 ¥ Kissimmee, FL Feb 8 —Feb. 16, 2010 36th Annual Kissimmee, FL Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 55

www.ironplanet.com

Online Auctions. February 25 & 26

Featuring equipment from

2008 CAT 950H

2007 PETERBILT MODEL 335 4900

2007 CAT CS54

2007 CAT 12H

2006 LULL MODEL 1044C-54

2006 CAT MODEL 740

2006 CAT 312CL

Equipment from Ring Power and many other sellers...

2004 CAT D8R

73 Backhoes

21 Graders

86 Compactors

101 Skid-Steers

93 Dozers

62 Water Related Equipment

193 Excavators

And much more.....

79 Forklifts

Auctions you can trust Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Go to www.ironplanet.com to view the complete auction schedule, guaranteed inspection reports, and place your bids.

Page 56 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alex Lyon & Son Holds Pre-Florida Auctions Sale in Tampa

Looking over some of the soil compactors is Ken Lillycrop of Bryans Equipment, Toronto, Canada.

The father and son team of Mike Serafini Sr. (L) and J.R. Serafini, Buffalo, N.Y., picked a good time of year to get out of Upstate New York and enjoy the Sunshine State while taking in an auction or two.

Coming all the way from Quebec City, Canada, are Claude Brochu (L) and Jacques Dumais.

Rick Phillips of Phillips & Son Heavy Haulers, Fort Worth, Texas, came to haul in some business at the Tampa sale.

lex Lyon & Son held an auction Jan. 30 in Tampa, Fla.

The sale, billed as a “complete liquidation auction for Briggs Equipment,” featured a wide array of Case Equipment as a well as sundry service and utility trucks and attachments.

Roger McHugh, president of Brookside Equipment, makes another deal via cell phone.

Test operating this Case CX50B miniexcavator is Tim Tracy of Southern Truck & Tractor.

(L-R): Prior to the start of the auction, Heath Murdock, Briggs Equipment; Colin Kelley, E.R. Chase; and James Hill of Hill's Dirt Pit talk about some of the iron that will go on the block.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 57

Tuscaloosa, AL,

1 of 7 Demo Unused 2008 Forestry ASV PT100’s

March 6, 2010 - 9:30 am

Black Warrior Auction will be conducting a Late model Construction Equipment, Logging Equipment, Truck and Trailer Auction Saturday March 6th, 2010 in Tuscaloosa, AL. Sale will start at 9:30 a.m. Black Warrior Auction will be selling equipment for: GE Commercial Finance, Wells Fargo Financial, First National Bank, Central Leasing, Peoples Bank, plus many local area contractors and Finance Companies.

Skid Steers 2008 ASV PT100 s/n PTJ04078, forestry model, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTJ04079, forestry model, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTJ04080, forestry model, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTJ04081, forestry model, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTJ04082, forestry model, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTJ04083, forestry model, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTJ04085, forestry model, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTD03965, cab with air conditioning, rubber tracks, aux hydraulics, unused 2008 ASV PT100 s/n PTD03966, cab with air conditioning, rubber tracks, aux hydraulics, unused 2004 ASV RC100 s/n RSD01051, cab with air conditioning, rubber tracks, aux hydraulics 2005 ASV RCV s/n RSG00306, orops, rubber tracks, aux hydraulics 2004 ASV RC85 s/n RSF00453, orops, rubber tracks, aux hydraulics 2008 ASV PT80 s/n PTI01273, orops, rubber tracks, aux hydraulics, unused 2008 ASV PT80 s/n PTI01274, orops, rubber tracks, aux hydraulics, unused 2008 ASV PT80 s/n PTI01286, orops, rubber tracks, aux hydraulics, unused 2008 ASV PT70 s/n PTH00697, orops, rubber tracks, aux hydraulics, unused 2008 ASV PT70 s/n PTH00698, orops, rubber tracks, aux hydraulics, unused 2008 ASV PT70 s/n PTH00699, orops, rubber tracks, aux hydraulics, unused 2008 ASV PT60 s/n PTE02460, orops, rubber tracks, aux hydraulics, unused 2005 ASV RC60 s/n RSE01434, orops, rubber tracks, aux hydraulics 2005 ASV RC50 s/n RSC01801, orops, rubber tracks, aux hydraulics Trenchers 1997 Vermeer V8550 s/n 1000538, 4x4, ride on trencher 1999 Vermeer V4150 s/n 1VRF0820851000718, 4x4, ride on trencher w/ back hoe attachment, 524 hours 2003 Vermeer RT100 s/n 1VRX051F331000689, walk behind trencher Barreto s/n 1B9USO614XL280274, walk behind trencher w/ trailer Man Lifts 1995 Snorkelift UNO41G s/n 9534671295, 4x4, dual fuel Fork Lifts 2007 JLG 8042 s/n 0160025786, shooting boom, 4x4, diesel engine, 8000lb, 42ft reach Taylor Y24BWO s/n 5369828, cab, 24000lb straight mast, s/s, Detroit diesel engine Special Auctioneer’s note: All bidders who register on sale day with their bank letter of guaranty will be entered in a $2,500.00 cash drawing to be given away during the auction, also all registered bidders will receive a free lunch!!! Make your plans today for this great opportunity to buy some great late model equipment.

2009 Club Car XRT850 s/n JY0917-018970, electric, w/ charger, lift kit 1994 Harley Davidson s/n 1HD1BKL17RY042869, Soft Tail Heritage

Backhoes 1995 John Deere 710D s/n 806733, orops, gp bucket Compactors 2004 IngersollRand SD45D TF s/n 178597, canopy, 54” smooth drum w/ padfoot shell kit, 254 hours Motor Graders 2008 Sany PQ160IIIA s/n 08PY00590112, c/a, 12ft sliding mold board, 85 hours 2004 Caterpillar 140H s/n CCA00644, c/a, 12ft sliding mold board, scarifier, 4,387 hours Crawler Tractors 1997 Caterpillar D5C s/n 7PS0406, orops, 6way blade Excavators 1999 Kobelco SK400LC s/n YSU0491, c/a, 52” bucket 2004 Kobelco SK330LC s/n YC07U0873, c/a, 48” bucket 1995 Komatsu PC300LC-5 s/n A30170 , cab, 48” bucket Hitachi EX270LC s/n 1586001, cab, 42” bucket 2007 Terex TC48 s/n TC00480236, canopy, 18” bucket, 3rd valve, rubber tracks, backfill blade, 388 hours 2007 Terex TC35E s/n TC035E0195, canopy, 15” bucket, 3rd valve, rubber tracks, backfill blade, 9 hours 2007 Terex TC35E s/n TC035E0192, canopy, 15” bucket, 3rd valve, rubber tracks, backfill blade, 6 hours 2007 Terex TC16 s/n TC00160433, canopy, 12” bucket, 3rd valve, rubber tracks, backfill blade, 4 hours Shaker Screens 2008 Astec ProSizer 2612V s/n 082940, mobile screening plant, dual deck vari-vibe high frequency screen, horizontal shaft impactor crusher 2007 Screen Machine Spyder 516T s/n JG1993, self propelled, Cummins diesel engine, 5x16 double deck two bearing system, 48” wide impact bed belt feeder 2006 Screen Machine 107T s/n JF1976, self propelled, Cummins diesel engine, dual 7ft shaker screens 2006 Screen Machine 107D s/n JF1072, towable, Caterpillar diesel engine, dual 7ft shaker screens 2007 Tiger Screen 55D s/n JG1986, pintle hitch, Yanmar diesel engine, 5ft x 5ft double deck shaker screen, 32 hours 2007 Tiger Screen 55D s/n JG1987, pintle hitch, Yanmar diesel engine, 5ft x 5ft double deck shaker screen, 19 hours 2007 Screen Machine Might II s/n JG2111, pintle hitch, shredder/trommel screen, Yanmar diesel engine, 3ft x 4ft trommel screen, 15 hours

Rock Crushers 2009 KPI-JCI FT4250 s/n 409560, impact crusher, self propelled, 440hp Caterpillar diesel engine, 42”x50” feed opening, overload protection system, vibrating grizzly feeder 2008 KPI-JCI FT2650 s/n 408783, self propelled, 300hp Caterpillar diesel engine, 26”x50” feed opening, vanguard jaw, overload protection system, vibrating grizzly feeder Conveyers 2007 Screen Machine CH40 s/n JG2128, belt conveyor, 40ft w/ 24” belt 2007 Screen Machine CH30 s/n JG2086, belt conveyor, 30ft w/ 18” belt Vac Tr a i l e r s Vermeer PMD555DT s/n 81210, pintle hitch, t/a, Yanmar diesel engine, 550CFM vacuum pump, 500 gallon debris tank Vermeer FM350DT s/n 87106, pintle hitch, t/a, Yanmar diesel engine, hydraulically driven valve exerciser, 300 gallon debris tank Dump Trucks 2006 IHC 5900i s/n 1HTXRAPT26J288166, tri-axle, 475 Cummins engine, 10sp Fuller trans, 20k front, 46k rear, Hendrickson susp, 16ft 21yd hard Ox Body dump, electric tarp, air lift 3rd axle, double frame, engine brake, 117k miles 2006 IHC 5900i s/n 1HTXRAPTX6J262883, tri-axle, 475 Cummins engine, 10sp Fuller trans, 20k front, 46k rear, Hendrickson susp, 16ft 21yd hard Ox Body dump, electric tarp, air lift 3rd axle, double frame, engine brake, 118k miles Specialty Trucks 1994 Kenworth T800 s/n 1XKDDE9X8RJ636244, water truck, t/a, 2500gal tank, front and rear spray Capacity s/n 3958, spotter truck, s/a, diesel engine Skidders 2006 John Deere 648GIII s/n 606805, c/a, d/f grapple, winch, 30.5 tires 2000 John Deere 648GIII s/n 577343, c/a, s/f grapple, winch, 30.5 tires Feller Bunchers 2004 John Deere 843H s/n 882310, c/a, Waratah FD22 saw head, 28L tires 2001 John Deere 843H s/n 880195, c/a, Waratah FD22 saw head Golf Carts and Motorcycles 2009 Club Car XRT1550 s/n SX0842-971285, 4x4, 2 seater, gas engine, manual dump bed, lift kit, 62 hours 2009 Club Car XRT950 s/n KZ0918-019941, 4x4, gas engine, manual dump bed, lift kit, 15 hours 2009 Club Car XRT850 s/n JZ0917-019382, gas engine, lift kit, 15 hours

Pickups and Autos 1988 Jeep Wrangler s/n 2BCHV81JXJB515003, 4cyl gas engine, 4x4 GMC C30 s/n CCL337V139734, gas engine, flat bed Tr a i l e r s 2006 Fontaine s/n 13N24830661837284, step deck, 48x102, aluminum composition, spread axle 1999 Fontaine s/n 13N248307X1585022, step deck, 48x102, spread axle, dove tail 2006 Big Tex s/n 16VLX202262E12804, t/a car hauler w/warn winch Monon s/n 1NNVA5321PM178954, 53ft van trailer Farm Tractors 2007 Tafe 5040 s/n 278053, 4x4, diesel engine, w/ loader, gp bucket, 3pt hitch, 60 hours Attachments and Misc. (4) Gyro Trac Toma-ax 500 HF grinding heads to fit skid steers (4) Construction attachments grinding heads to fit skid steers Varning 78” gp skid steer bucket (11) Varning 72” gp skid steer buckets (6) Varning 67” gp skid steer buckets (2) Varning 72” grapple rock buckets to fit skid steer Varning 66” grapple rock bucket to fit skid steer Varning 78” grapple bucket to fit skid steer (2) Varning 72” grapple buckets to fit skid steer (2) Varning 66” grapple buckets to fit skid steer (3) Constructio n attachments 4in1 buckets to fit skid steer (4) Varning pallet forks to fit skid steers (3) push blades to fit skid steers Edge rock picker to fit skid steer (2) Lowe trenchers to fit skid steer Mclaughlin backfill auger Implemax silt fence plow Bradco backfill auger Vermeer backfill auger Varning auger attachment to fit skid steer Terra stump grinder to fit skid steer Amerequip backhoe attachment to fit skid steer Vermeer grapple (4) new 30.5 skidder tires (4) new 28L skidder tires (4) used 28L sidder tires (8) new 11R24.5 truck tires (8) new 11R22.5 truck tires Cushman Truckster s/n 2156, utility cart, gas engine, 4sp trans, manual dump bed Cushman SprayTek s/n 788, spray rig, gas engine, 6ft boom, spray tank IngersollRand L6 s/n 450403130, light plant Whitco 4-300H s/n 203-118, pressure washer, mounted on t/a trailer, w/ 200gal water supply tank CAE saw mill (2) 2006 Gulf Stream FEMA camper, unused, queen bed, bunk beds, full size refrigerator, stove, holding tank WMI 4826D 42” sod installer

This is a partial listing only, if you are interested in a particular piece of equipment please call and make sure that it will be available on sale day.

Online bidding provided by Equipmentfacts

www.blackwarriorauction.com 1-866-770-3855 or 1-205-752-7800

Auctioneer Mark White • 205-454-4646 • AL# 1808. 5% buyer’s premium & a 2% Internet fee for this sale.

Page 58 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALL ERECTION & CRANE RENTAL..............................................15

HITACHI CONSTRUCTION MACHINERY ....................................42

ALLU GROUP.................................................................................19

HYDRAULIC MACHINERY INC .....................................................29

ASC CONSTRUCTION EQUIPMENT USA .............................3,9,60

IROCK CRUSHERS .......................................................................36

ATLANTIC CAPITAL COMPANIES...................................................9

IRON PLANET

BARGAINS .....................................................................................48

ONLINE AUCTION......................................................................55

BEASLEY FOREST PRODUCTS...................................................16

JOHN DEERE.................................................................................47

BLACK WARRIOR AUCTION

KAWASAKI CONSTRUCTION MACHINERY.................................20

TUSCALOOSA AL.......................................................................57

MANHEIM AUCTION ......................................................................53

CCS EQUIPMENT ............................................................................6

MAY HEAVY EQUIPMENT ...............................................................7

CEG SCALE MODELS ...................................................................24

MOBRO MARINE INC ......................................................................2

CLASSIFIEDS............................................................................50,51

POWER EQUIPMENT CO................................................................8

COBLE TRENCH SAFETY.............................................................12

POWERSCREEN MID-ATLANTIC .................................................35

CONSTRUCTION EQUIPMENT CO ..............................................37

R S BRASWELL CO INC................................................................13

CONSTRUCTION EQUIPMENT GUIDE

REMU SCREENING TECHNOLOGY.............................................39

CEG AUCTION BANNER PROMO.............................................52 CEG WEB VALUE ADDED .........................................................41 EXCAVATORS & ATTACHMENTS PROMO ...............................32

RITCHASON AUCTIONEERS LEBANON TN .............................................................................56 RITCHIE BROS. AUCTIONEERS

WE DO TRADE SHOWS ............................................................46

AUCTION CALENDAR ...............................................................59

SHOPPING FOR USED EQUIPMENT .......................................17

ROAD BUILDERS MACHINERY ......................................................8

FELLING EW SLEEPER & MIDCO TESTIMONIALS.................21

ROCKSTER NORTH AMERICA .....................................................34

CEG WANTED ............................................................................49

RSC EQUIPMENT RENTAL ...........................................................15

DOOSAN PORTABLE POWER......................................................25

SAND SCIENCE .............................................................................39

DURATECH ....................................................................................34

STAFFORD ................................................................................30,31

DYNAPAC .......................................................................................23

TAMPA MACHINERY AUCTION

EASTERN MATERIAL ....................................................................14

TAMPA FL ...................................................................................53

EFFICIENCY PRODUCTIONS .......................................................48

TEREX CRANES ............................................................................45

ERB EQUIPMENT CO ....................................................................11

THOMPSON MACHINERY USED PARTS.....................................40

FELLING TRAILERS ......................................................................29

TOPCON POSITIONING SYSTEMS..............................................19

FLECO ATTACHMENTS.................................................................16

TOWMASTER INC .........................................................................27

GATORBACK TRACKS & EQUIPMENT ..........................................5

TRACTOR TRACS INC ..................................................................40

GEHL ..............................................................................................48

TRENCH SHORING SERVICES ....................................................13

GEITH INC........................................................................................6

U-SCREEN .....................................................................................36

HAROLD HOWELL CONSTRUCTION...........................................12

WTM (WINSTON TRAILERS) ........................................................29

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 10, 2010 • Page 59

EVERYTHING SELLS TO THE HIGHEST BIDDER

Auction Update TIPTON, CA, USA 559.752.3343 FIANO ROMANO (ROME), ITALY +39.052.381.8801 ORLANDO, FL, USA 863.420.9919 MOERDIJK, THE NETHERLANDS +31.168.392200 FORT WORTH, TX, USA 817.237.6544 LOS ANGELES, CA, USA 951.940.9441 DUBAI, UNITED ARAB EMIRATES +971.4.812.0600 TORONTO, ON, CAN 905.857.2422 OLYMPIA, WA, USA 360.956.1500 POLOTITLÁN, MEXICO +52.427.266.0909 ST AUBIN SUR GAILLON, FRANCE +33.23.277.8610 SACRAMENTO, CA, USA 530.724.3900 EDMONTON, AB, CAN 780.955.2486 OCANA, SPAIN +34.925.595.460 CHICAGO, IL, USA 815.941.6400 BRISBANE, QLD, AUSTRALIA +61.7.3382.4444 NASHVILLE, TN, USA 615.453.4549 DENVER, CO, USA 970.535.6700 COLUMBUS, OH, USA 937.568.9500 ST LOUIS, MO, USA 636.931.0090 GEELONG, VIC, AUSTRALIA +61.3.5245.3333 CAORSO, ITALY +39.052.381.8801

FEB 12 FEB 13 *FEB 15 - 19 FEB 24 - 26 FEB 25 & 26 MAR 1 & 2 MAR 1 - 3 MAR 2 & 3 MAR 4 & 5 MAR 5 MAR 5 * MAR 9 & 10 MAR 10 - 12 MAR 11 & 12 MAR 11 & 12 MAR 16 MAR 16 MAR 16 & 17 * MAR 17 MAR 18 MAR 18 MAR 18

Upcoming Unreserved Public Auctions

MONTRÉAL, QC, CAN MINNEAPOLIS, MN, USA ALBUQUERQUE, NM, USA STATESVILLE, NC, USA CHILLIWACK, BC, CAN HARTFORD, CT, USA HOUSTON, TX, USA LONDON, ON, CAN ATLANTA, GA, USA JACKSON, MS, USA KANSAS CITY, MO, USA REGINA, SK, CAN GRAND CAYMAN ISLANDS NORTH EAST, MD, USA BOISE, ID, USA GRANDE PRAIRIE, AB, CAN MONCOFA, SPAIN ISTANBUL, TURKEY SALT LAKE CITY, UT, USA DETROIT, MI, USA PITTSBURGH, PA, USA MEPPEN, GERMANY

450.464.2888 507.774.5050 505.836.0738 704.873.6633 604.823.2700 860.684.1055 713.455.5200 519.425.4321 770.304.3355 601.939.2258 816.633.4096 360.776.2397 778.331.5427 410.287.4330 1.208.344.0350 780.538.1100 +34.964.580.559 +90.216.366.03.00 435.843.4260 734.587.3200 724.947.7240 49.593.5705560

MAR 18 & 19 MAR 19 MAR 23 MAR 23 MAR 24 MAR 24 MAR 24 & 25 MAR 25 MAR 25 & 26 MAR 29 MAR 30 MAR 30 MAR 30 MAR 30 & 31 APRIL 13 *APR 14 & 15 APR 15 APR 17 *APR 22 MAY 5 MAY 20 JUNE 8

*NOTE NEW DATE - Dates are subject to change

Can't make it to the auction? Place your bids over the Internet at rbauction.com. Submit proxy bids in advance of any auction, or place real-time bids through our live auction broadcasts. Click rbauctionBid on the Ritchie Bros. web site for details.

CALL FOR A FREE BROCHURE

800.211.3983 For information on upcoming auctions, visit our web site at rbauction.com

Page 60 • February 10, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEED A BIGGER DIGGER ? GET A VOLVO.

More Care. Built In.

If you have a lot of Mother Earth to move there is no better equipment than Volvo Excavators and Volvo Articulated Haulers. From boom to counterweight, every Volvo Excavator is simply built better. They are aggressive, rugged, powerful and balanced. Volvo Articulated Haulers come with a heritage of superior load capacity, fast work cycles and powerful dump hydraulics. When combined with low fuel consumption and long service intervals, you can be assured of high productivity and low cost. So, if you need a bigger digger and a tougher hauler, this Volvo combination can’t be beat. Visit ASC Construction Equipment now and get your Volvo.

www.ascvolvo.com

Birmingham, AL 205-856-4008

Acworth, GA 770-529-5125

Asheville, NC 828-687-0620

Charleston, SC 843-414-1120

Huntsville, AL 256-261-1200

Atlanta, GA 770-319-0074

Charlotte, NC 704-596-8283

Columbia, SC 803-791-0740

Mobile, AL 251-473-8222

Buford, GA 678-318-9500

Greenville, NC 252-754-5280

Piedmont, SC 864-704-1060

Montgomery, AL 334-269-1522

Savannah, GA 912-964-8079

Raleigh, NC 919-661-8710

Chattanooga, TN 423-308-7940 Knoxville, TN 865-525-1845