Southeast 13, June 30, 2021 by Construction Equipment Guide

Published Nationally ®

Southeast Edition

June 30 2021

$3.00

Vol. XXXIII • No. 13

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Tennessee DOT Region 1 photo

Ma gnolia Dredge & Dock Thinks Outside the Box…8

Dobbs R aises Funds for Constr uction A ngels…20

With traffic along East Tennessee’s Alcoa Highway (State Route 115/U.S.129) increasing daily and congestion in the area causing concern for commuter wellbeing, the Tennessee Department of State Transportation (TDOT) embarked upon a highway corridor improvement project in 2016, spanning Blount and Knox counties. The construction zone measures approximately 13 mi., starting at State Route 35/Hall Road in Blount and ending at Cherokee Trail in Knox County. Work entails $300 million in improvements, including reconstruction

By Ruksana Hussain CEG CORRESPONDENT

JM Wood Holds Four-Day Sal e in Montg omer y…72

Table of Contents.............4 Attachment Section ...................................29-35 Aggregate and Recycling Section......................41-51

Filling the Labor Pool Post-Pandemic, Construction Industry Wants Workers to Jump in

Trucks & Trailer Section ...................................53-56

By Lucy Perry

Business Calendar..........60

Emerging from the coronavirus pandemic, contactors are struggling to fill crews. Construction employment dropped by 20,000 from April to May, the third decline in the previous four months. That’s further

Auction Section ........70-73 Advertisers Index...........74

and widening of what TDOT terms an “urban principal arterial roadway” on the National Highway System. Not only does the corridor serve as a major connection between the cities of Knoxville, Alcoa and Maryville, but it also is a frequented route to McGhee Tyson Airport and the Great Smoky Mountains National Park. The heavy flow of traffic comprising local residents and businesses as well as airport commuters has caused rising capacity concerns. The current construction will help address all of that, resulting in

CEG CORRESPONDENT

challenged the industry, which for years has faced a stagnant labor pool. President Joe Biden is pushing two major bills to boost both infrastructure and the supply chain, but some in the industry firmly believe these programs will increase workforce burdens. see LABOR page 57

see ALCOA page 24

Page 2 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Local Dealer Piedmont L Local ld dealer l address dd 864.704.1060 000.000.0000 Columbia www.localdealerweb.xx 803.791.0740 Charleston Local Dealer 843.414.1120 Local dealer address TENNESSEE 000.000.0000 Kno oxville xville www.localdealerweb.xx 865.525.1845 Chattanooga Local Dealer 423.308.7940 Local dealer address 000.000.0000 GEORGIA www.localdealerweb.xx Buford 678.318.9500 Local Dealer Savannah Local dealer address 912.964.8079 000.000.0000 Macon www.localdealerweb.xx 478.200.3300 NORTH DAKOTA TA Local Dealer Local dealer address Williston 000.000.0000 701.577.1249 www.localdealerweb.xx Fargo 701.271.2360 Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx

DEALER LOGO Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx ascendummac ascendummachinery.c y.com . om .c Authoriz ed dealer for Volv Vhiner olvo Construction Equipment q p

UPP HIGH ORR ON T GROUND, THE W HAVE WE VE YOU COVEERED. ERED Volvo high-reach excavators meet the tough demands of demolittion with unprec unprecedented ed po powe er,, prot protection and reach. And with w factory-fitted y fitted guarding and oth her demolition-ready features, our complete crawler lineup c can easily tackle cleanup safely and a efficiently. High or low, all Volvo excavators come with a Lifetime Frame F and Structu ure Warranty, so you can confidently handle whatever tomorrrow throws your way.

Contact local Ascendum location toto Contac ct your yyour our loc al [[Dealer Dealer Name] location tolearn learnmore moretoday! ttoday! oday!!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 3

Page 4 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

To ensure the high level of service that has defined this family-owned business for the past 30 years, DSC Dredge LLC has five key values: Commitment, Quality, Innovation, Service and Customization. This is what the foundation of DSC is built upon, and what this company strives to do each and every day.

JOHN DEERE CELEBRATES 50 YEARS OF BACKHOE LOADER MANUFACTURING

John Deere is celebrating 50 years of backhoe loaders, a history of innovation and excellence that first started with the introduction of the JD310 model in 1971. Today, the 310L, the latest generation of the original model, remains a cornerstone within the John Deere backhoe lineup.

AED FOUNDATION’S LATEST RESEARCH REPORT LOOKS AT BUILDING DIVERSITY

The report looks at the challenges that minority groups face while working within the equipment distribution industry, recommends solutions for recruiting more minorities into the workforce, and examines how the industry can create more opportunities for minority-owned distributors.

Standing behind its versatile heavy haul products and custom trailer innovations, Iowa-based manufacturer XL Specialized Trailers started 2021 on a high note with a new warranty policy and new financing program, both improvements over its own offerings and setting the standards high for the industry overall.

FLORIDA COAST EQUIPMENT TO PURCHASE TWO KUBOTA DEALERSHIPS

Despite national labor and inventory shortages caused by the COVID-19 pandemic, Florida Coast Equipment, a family-owned and operated full service Kubota dealership, will add 35 high-paying jobs as part of its expansion deal to purchase two Gulf Coast Turf & Tractor Kubota dealerships. Founder, Publisher & CEO Southeast Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Contributing Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Richard C. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Eric Olson Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

AGGREGATE PRODUCTION & RECYCLING SECTION

www.constructionequipmentguide.com

Facebook

Twitter

42 44 48

MB CRUSHER HELPS EVERY SITE BECOME RECYCLING CENTERS

EVOQUIP LAUNCHES ITS NEW FALCON 1220, 1230 RANGE IN U.S. CAT MH3250, MH3260 MATERIAL HANDLERS SET NEW STANDARD

POWER MEETS PORTABILITY IN MCCLOSKEY’S I4C IMPACT CRUSHER

50 50

SANDVIK CELEBRATES MYFLEET 1,000TH UNIT MILESTONE

METSO OUTOTEC, AM KING ENTER GLOBAL PARTNERSHIP DEAL

DEPARTMENTS 60 70

BUSINESS CALENDAR COMING AUCTIONS

EQUIPMENT

KUBOTA SCL1000 Stand-On Track Loader Attachments

PRINOTH M450s Mulching Head

32 34 54

KOMATSU New Hydraulic Breakers

ROTOTILT Compact QuickChange Coupler

ZEAL MOTOR INC. Fat Truck Amphibious Vehicle

Kent Hogeboom

Rich Olivier

• North & South Carolina • Tennessee • Virginia

National Sales Manager

• Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida

YouTube

704/553-8888 704/726-1452 rmckeon@cegltd.com

Cell e-mail

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published biweekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial

315/866-1423 518/221-5159 khogeboom@cegltd.com

METSO OUTOTEC EXTENDS EQUIPMENT OFFERING WITH NEW MRM

Richard C. McKeon

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

JM WOOD HOLDS FOUR-DAY AUCTION IN MONTGOMERY, ALA.

JM Wood Auction held a four-day auction at the company’s Montgomery, Ala., headquarters facility on June 15 through the 18. At final bid, there was $52,000,000 plus in gross sales, including more than $21,000,000 in online sales, and more than 3,500 lots sold.

Dobbs Equipment hosted its inaugural charity golf outing benefiting Construction Angels in Boca Raton, Fla., raising more than $140,000. Construction Angels provides financial assistance and grief counseling to the children and spouse left behind when a construction worker has a fatality on the job site.

WARRANTY POLICY, FINANCING GIVES XL SPECIALIZED INDUSTRY EDGE

MCCLUNG-LOGAN TO REPRESENT PRINOTH TRACKED VEHICLES IN MD., VA.

Prinoth, a manufacturer of tracked vehicles, has introduced McClung-Logan of Maryland as its representative of the Panther lineup for the states of Maryland and Virginia. After 80 years in business, McClung-Logan’s mission is to develop true and transparent partnerships with its clients and support them.

DOBBS EQUIPMENT RAISES FUNDS FOR CONSTRUCTION ANGELS

LA. BIZ HIGHLIGHTS DSC DREDGE’S COMMITMENT TO INNOVATION

Circulated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

SOUTHEAST EDITION

Cell e-mail

770/443-3174 404/831-9526 rolivier@cegltd.com

material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 5

LOCATIO T ONS THROUGHO OUT FLORIDA Orlando 407.850.9614 Tampa 813.630.0077 7 Ft. Myers 239.481.8554 4 Davie 954.581.4744 4 Miami 305.477.2442 2

Find us online e at ALTAEQUIPMENT.COM

Lake City 386.758.7444 4 Jacksonville e 904.737 7..6000 0 Tallahassee 844.Go2.Alta

Page 6 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wel e l Rou unded d. www.wiirtgen-group.com/tec chnologies

CLOSE TO OU UR CUSTOMERS

Call y your our L Local Power Bra anch for More Informa nforma ation tion. Chattanooga (423) 894-1870

Kingsport (4 423) 349-6111

Knoxxville (865) 5777-5563

Memphis (901) 346-980 00

Tupelo (662) 869-0283

www.P w.PowerE EquipCo.com

ADVAN NCE OF A

Subject to cred e it approval

WOR RLD LE EADER

IS S COM OMING G!

S tG Smar tGrad dee

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 7

LQWHJ U DWH G P DF KLQ H F R QWUR O IUR P WK H IDF WRU\

Comin ng Soo on

to a Jam mes Riverr Location n Near You! You! www.jamesriverequipment.ccom

John Deere 333G SmartGrad ade

struction the e al for Cons Laandscapers, John Deer 33 Ide and 33G CTL with Sma ar tGrade has Do ozer Mode and Integr a ted Gr ade & R Q W U R O , W ō V W K H Ɠ U V W & R P S D F W 7 U D F N / R D G H U W R I H D W X U H I X O O \

You our Comp pact Solution ST GO ST T SMAR T TER TER. JUS

Page 8 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

As of today, Magnolia’s fleet includes three Barracuda class dredges; one 8-in. Moray class dredge; 10- and 18-in. Shark class dredges; one 16-in. Marlin class dredge; a number of booster pumps and a workboat, which are all transportable allowing the company to service customers throughout the United States.

Magnolia Dredge & Dock LLC does a lot of industrial and environmental dredging maintenance; coastal restoration; cleaning of lakes and pond; coal ash removal; levee construction, deepening and maintaining of waterway access channels.

La. Biz Highlights DSC Dredge’s Commitment to Innovation To ensure the high level of service that has defined this family-owned business for the past 30 years, DSC Dredge LLC has five key values: Commitment, Quality, Innovation, Service and Customization. This is what the foundation of DSC is built upon, and clients who become long-standing business partners and friends only confirms what this company strives to do each and every day. Magnolia Dredge & Dock LLC., headquartered in Mandeville, La., was founded in 2009 through the merging of two companies. According to Michael Johnson, managing member, while the company initially focused on providing hydraulic dredging services, it has since expanded to include dewatering and water treatment, plus heavy civil and marine construction to its portfolio of services. Over the years, and with its primary focus on dredging, this local company continues to service both the private and public sector throughout the United States. “We do a lot of industrial and environmental dredging maintenance, coastal restoration, cleaning of lakes and ponds, coal ash removal, levee construction, deepening and maintaining of waterway access channels to name a few areas of focus,” Johnson said. The spark of a long-term partnership between DSC Dredge LLC and Magnolia Dredge & Dock LLC started well before Magnolia’s inception. “When I was employed by another company, we rented dredges from Dredging Supply Company, which is now known as DSC Dredge. That’s how I got introduced to them and the quality of their product and impeccable service standards.” He said it was “a match made in heaven” for Magnolia, since both companies are located in the greater New Orleans area, and one of DSC’s specialties is customizable dredges, which is key to Magnolia’s service offerings. Johnson recalled Magnolia’s first three dredges, which were all the DSC Barracuda class dredge, came from DSC’s Mississippi based subsidiary, Best Equipment Technologies, and they immediately went to work on a project in

Mississippi, which turned out to be a big success. “Over the years Magnolia has purchased dredges from many other manufacturers, however it’s difficult to find another supplier that has such a high focus on customer service which was, and continues to be, extremely important to us,” said Johnson. “Over the years we have experienced first-hand a performance driven culture with DSC. Their equipment has always performed well, and their customer service is unfaltering both in the field and during the entire purchase/build process. DSC’s expertise, has always been, and will continue

to be, invaluable to Magnolia.” One of the main challenges faced by most service driven dredging companies is that every project has specific requirements, and unlike most manufacturing companies, DSC’s ability to design customizable dredges has allowed Magnolia to stand out against its competitors. Magnolia thinks of its dredge fleet like a “toolbox,” prepared with a wide variety of dredges to meet the needs of its customer. DSC’s ability to customize its equipment has significantly contributed to the diverse business offerings Magnolia can see MAGNOLIA page 60

One of the main challenges faced by most service-driven dredging companies is that every project has specific requirements. DSC has the ability to design customizable dredges.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 9

CUTTTING EDG GE EXCAVA VATTOR TE T CHNOLLOGY Link-Be elt 210 X4

In Sttock!

Call to Sc chedule a Demo Toda o y!

When you need us, where ere you needd us Equipment pment • Parts • Service

www.g gsequipment.net Tampa a 866-586-8956

Orlando 407-859-9160

Talla a hassee 850-5774-0892

Fort Myers 239-334-60663

Ocala 866-586-8956

Jacksonville 904-268-4400

Pompano Beach 9 954-327-8808

Page 10 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE MAX FOR THE WAY YOU WORK. With our MAX-Series machines, we stripped down and reimagined every single detail. From premium 360-degree visibility to our roomiest design yet, these compact track loaders and skid steers are designed with creature comforts that let you work more comfortably for longer periods of time. Plus, every MAX-Series machine is built to lead the industry PU O`KYH\SPJ WLYMVYTHUJL [YHJ[P]L LɈ VY[ \UKLYJHYYPHNL technology, reliability and serviceability, meaning you’ll be able to accomplish more than you ever thought possible.

DISCOVER THE MAX-SERIES LINE-UP AT 1809 Blue Clay Road Wilmington, NC 28405 (910) 782-2477

EXPLORE THE FULL MAX-SERIES LINEUP AT ASVI.COM

10:19 AM

1809 Blue Clay Road Wilmington, NC 28405 (910) 782-2477

www.soundheavymachinery.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 11

0% for up to 60 mo onths on ALL of our NEW Case loaders l You can now order all your parts p online! Shop, check ava ailability, and pay for every part you will ever e need all in one place! http ps://eportal.trekkergroup.com:7745/D Default.aspx

USED EQUIPMENT SPECIALS!

2018 CASE 650L LGP, 21505 2015 CASE 586H, 4WD, 15' 2016 CASE 580SN, STAN2018 CASE TV380, 84'' LOW Hours, 120'' DOZER BLADE, MAST, ROPS, 48" PALLET DARD HOE, ROPS, PILOT PROFILE BUCKET W/ BOE, ET0612....................$67,000 FORKS, 5,015 hours, ET0089 CONT, 2350 hours, ET0530 .. 800 Hours, ET0772 .............. ................................$44,000 ................................$47,000 ................................$50,000

2015 CASE 621F, 3.0 CUYD JRB QC TYPE, CLOSED CAB, JRB 416 STYLE HYD, 3650 Hours, ET0261 ........$92,000

2016 CASE SV212, 284" SINGLE DRUM RIDE-ON ROLLER, 1380 Hours, ET0845....................$57,000

2016 CASE 850M WT, CLOSED CAB A/C, 28" TRACKS, 120 BLADE, 3000 Hours, ET0726 ........$87,000

2016 CASE CX350D, CAB A/C, 13'-3" ARM, STEEL TRACKS, 3500 Hours, ET0715..................$192,000

2015 TEREX TA300, 5500 Hours, ET0970 ......$152,000

2018 CASE CX80C, CLOSED CAB, A/C, RUBBER TRACKS, 650 Hours, ET0769 .............. ................................$90,000

2015 CASE CX210C, 8" ARM, 2017 CASE CX350D, 213' 3'' Equipped with Double Acting ARM, 2700 Hours, ET0738 .. Auxiliary Hydraulics, 5000 ..............................$237,000 Hours, ET0264 ........$92,000

Miami

Jacksonville

West Palm Beach

Tampa

Fort Myers

Orlando

12601 W. Okeechobee Rd Miami, FL 33018 (877) 971-7070

9235 Bush Drive North Jacksonville, FL 32218 (904) 516-5380

1150 Barnett Drive Lake Worth, FL 33461 (561) 296-9710

1504 Tampa East Blvd Tampa, FL 33619 (813) 341-4646

3051 Hanson Street Ft. Myers, FL 33916 (239) 690-0661

9481 Boggy Creek Road Orlando, FL 32824 (407) 888-0024

www.TrekkerGroup.com

Page 12 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AED Foundation’s Latest Research Report Looks at Building Diversity The 310L, the latest generation of the original model, remains a cornerstone within the John Deere backhoe lineup as a result of the continuous improvement to the design and efficient performance.

John Deere Celebrates 50 Years of Backhoe Loader Manufacturing John Deere is celebrating 50 years of backhoe loaders, a history of innovation and excellence that first started with the introduction of the JD310 model in 1971. Today, the 310L, the latest generation of the original model, remains a cornerstone within the John Deere backhoe lineup as a result of the continuous improvement to the design and efficient performance. “This anniversary celebrates half a century of reliability and providing customer value stemming from the introduction of our backhoe lineup in 1971,” said Brian Hennings, product manager, John Deere is celebrating 50 years of backhoe loaders, a hisJohn Deere Construction & Forestry. “We are tory of innovation and excellence that first started with the proud of the advancements we’ve made to our introduction of the JD310 model in 1971. backhoe loader line in the last 50 years and are committed to providing our customers with continued inno- cost of ownership and enhanced uptime. This trajectory has continued for 50 years, with John vation.” Since the 50-hp JD310 entered the market, John Deere has Deere launching many new backhoe loader models over the continued to evolve its backhoe lineup, building upon the past five decades with the customers’ needs in mind. As a commitment to the next generation of backhoe loadoriginal design through new innovations and technologies. Today, additional models, such as the 310SL and 310L EP ers, John Deere has begun joint-testing its first-ever battery electric backhoe loader with National Grid, an electricity, continue to advance to meet changing customer needs. The newly redesigned 310SL machine allows operators to natural gas and clean energy delivery company. Aimed at be 16 percent more productive in trenching applications over lowering its carbon footprint and promoting sustainability, the previous design. Now with pressure-compensated load- the Deere E-Power backhoe loader targets the performance sensing (PCLS) hydraulics, the 310SL provides better mul- of a 100-hp 310L diesel-powered machine, but with zero tifunctioning, smoother machine control and up to 15 per- tailpipe emissions. John Deere is committed to the future of the construction cent greater craning capacity with Lift Mode, collectively providing a distinctive customer experience and enhanced industry, and the 50th anniversary of John Deere backhoe loaders is a testament to the growth and evolution of its machine reliability, according to the manufacturer. Since its introduction in 2012, the 310L EP continues to machines over time, the company said. Helping commemorate the anniversary, John Deere has deliver enhanced value with the redesigned powertrain, which includes a synchromesh manual transmission and a created a replica toy model of the original JD310 backhoe more basic operator station. The 310L EP also features a loader to help customers celebrate the 50th anniversary at Yanmar 3.3L engine that complies with Environmental home. Available for purchase in late summer, at Protection Agency FT4 emissions regulations. With no https://www.johndeerestore.com/, each model will feature a external aftertreatment components needed, the design min- unique 50th anniversary icon to showcase the important imizes machine complexity and the number of parts that milestone. For more information, visit http://www.johndeere.com/  must be maintained by the customer, resulting in lower total

The AED Foundation’s latest commissioned research report, Building Diversity into the Equipment Distribution Industry, provides industry stakeholders with key recommendations to recruit and retain a diverse workforce. The report looks at the challenges that minority groups face while working within the equipment distribution industry, recommends solutions for recruiting more minorities into the workforce, and examines how the industry can create more opportunities for minority-owned distributors. The Foundation provided recommendations based on the report’s findings to promote more diverse workplaces across the equipment industry. Some of these recommendations included implementing mentorship programs and annual diversity training as a requirement for employees. Creating a diverse environment can help ensure employees from all backgrounds feel welcome and respected within the workplace. Diversity also plays a crucial role in the industry’s goals to reduce the workforce shortage. This report reinforces the need to expand the workforce development efforts of The AED Foundation and other like-minded organizations to create a more diverse and robust pipeline of qualified workers. AEDF’s Executive Vice President and COO, Jason Blake, said, “AEDF is proud to provide this report focused on diversity to industry members. Promoting and implementing diverse practices within dealerships is key to gaining satisfied, lasting employees while reducing the workforce shortage in the process.” To view the entire report, visit https://aedfoundation.org For more information, contact The AED Foundation’s Associate Director of Development and Workforce, Marty McCormack, at mmccormack@aednet.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 13

On today’s jobsite, precision is power. John n Deere SmartGrade™ Excavaators include a variety of graade-control options to give you the power of choice. Choose from integrated 2D guidan nce all the way up to SmartGrrade™ 3D grade control and hit h grade fas faster. Operators att every level of OLNH 9LUWXDO H[SHULHQFH ZLOO EH DEOH WR TXLFNO\ DQG FRQƟGHQWO\ DFKLHYH JUDGH ZKLOH DYRLGLQJ FRVWO\ UHZRUN 6PDUW U IH IHDWXUHV D U )HQFH DOHUW U V DQG 2YHUGLJ 3URWHFW KHOS JXDUG WKH PDFKLQH DQG GHVLJQ VX XUID UIDFH IR IRU DGGHG SHDFH RI PLQ QG $QG ZLWK WKH ƠH[LELOLW\ RI -RKQ - 'HHUH JUDGH PDQDJHPHQW VROXWLRQV upgrades are easy and ready when you are. Call C or visit us today to learn n more.

Adairsville,, GA..............770.773.9857 Albany, GA ...................229.888.1212 Andrews, SC.................843.221.4940 Atlanta, GA ..................404.691.9445 Aynor, SC .....................843.358.5688

Braselton, GA...............770.965.1889 Brunswickk, GA..............912.264.6161 Columbuss, GA ..............706.687.3344 Cuthbert, GA................229.732.2631 Dothan, AL A ..................334.794.8691

FlintEquipCo.com m

Grovetown,, GA.............706.855 G 5.5440 Ladson, SC...................843.572 2.0400 Macon, GA...................478.788 8.1586 Savannah, GA...............912.964 4.7370 Simpsonville, SC ...........864.963 3.5835

Troy, y, AL.........................334.566.4181 Valdosta, GA .................229.474.6680 Walterboro, SC..............843.539.1420 West Columbia, SC ........803.794.9340

Page 14 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call Drew for Service & Brian for Parts.

704-233-4242 800-443-7569 Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm

3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com

I-85 Exit 74 (Julian Rd. Exit)

Walt Reddick (336) 749-4661 Taylor Johnston (704) 746-1496

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 15

Salisbury, NC (704) 630-4994 (800) 665-6532

2013 International Terrastar 11' Cab and Chassis, Maxxforce 7 Engine, 300 HP, 145K Miles, Automatic Transmission, 158" Wheelbase, 82" Cab to Axle, 19,500 GVW, Non-CDL, Hydraulic Brakes, Cruise, Power Locks & Windows, Power Mirrors, AM/FM CD, AC (#5667)...... ....................................................$17,500

2009 Kalmar Ottawa 4x2 Yard Spotter, w/ DOT Package, ISB Cummins, 73K Miles, Allison Automatic, 200 HP, DOT Package, Raised Roof, 11R 22.5 Tires, #36,000 GVW, Air Brakes, Hydraulic Fifth Wheel, AM/FM, AC (#5714)........ $34,900

2014 Peterbilt 386 Tandem Daycab, ISX Cummins, 450 HP, 312K Miles, 13 Spd, 220” WB #58,000 GVW, 46,000 Rears, Jake, Cruise, Headache Rack, Dual Wet Kit, Air-Ride, Headache Rack, Diff. Lock, Full Locking Diff Forward and Rear Drive Axles, Air-Ride Cab, Susp Dump, Power Windows & Locks, AM/Fm CD, AC (#5726) $74,900

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 350 HP, 200K Miles, 10 Spd, #19,840lb Front Axle, Wood Floor, Cruise, Alum. Outsides, Diff. Lock, Air-Ride, Susp. Dump, Air-Ride Cab, Double Frame, Ramsey Winch, Tool Box, Pintle/Ball Hitch, 4.78, AM/FM CD, AC (#5688) ...................................... $73,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 229K Miles, 350 HP, 10 Spd, Winch, Cruise, Diff. Lock, Air-Ride, Air-Ride Cab, Suspension Dump, Double Frame, Pintle/Ball Hitch, Wood Floor, Alum. Outside Wheels, #19,840 Front Axle, AM/FM CD, AC (#5625) ...................................... $69,900

2013 Mack CXU-613 Tandem Axle Daycab, MP8 Mack, 480K Miles, 415 HP, 10 Spd, Dual Wetline Kit, 194" WB, Aluminum Headache Rack, Jake, Cruise, Air-Ride Susp, Susp Dump, Tilt/Tele, Diff. Lock, ATC, Saddle Box, Aluminum Wheels, AM/FM CD, AC (#5719) ............ $34,900

2003 Moffett M5500 Piggyback Forklift, Kubota 4 Cylinder Diesel Engine, 3,211 Hours, 5,500lb Lift Capacity, 24” Load Center, Stabilizers, Side Shift, Tilt, 48” x 6” Forks, 5,880lb Unladen Weight (#5461) .... .................................................... $14,900

2014 Peterbilt 388 Tandem Daycab, ISX Cummins, 450 HP, 445K Miles, Allison Auto. Trans., Dual Wetline Kit, Headache Rack, Air-Ride, Jake, Cruise, Air-Ride Cab, Dual Breathers, Susp Dump, Diff. Lock, Drive Axle Lock, All Alum. Wheels, 224" WB, AM/FM CD, AC (#5742) .................................................... $79,900

1982 Peterbilt 359 Tandem Axle, Great for a Restoration Project, NTC Cummins, 350 HP, Jake, Corvette Dash, Eaton Fuller Trans., Diff. Lock, Wetline Kit, 220" WB, 128" CA, Dual Vertical Stacks, Air-Ride, LP 24.5 Non Piloted Wheels, AM/FM, AC, Selling As it Sits, Assume Non-Runner (#5702) .................... $9,900

2011 Princeton PBX Piggyback Forklift, Kubota 2403M NA 4 Cylinder Diesel Engine, 2,600 Hours, 5,000lb Capacity, Stabilizers, Side Shift, Traction Lock, Park Brake, Tilt (#5584) .... $24,900

2012 Freightliner M2 28' x 102" Jerrdan Rollback, 253K Miles, 10 Speed, ISC Cummins, 350 HP, #19,840lb Front Axle, Cruise, Tilt/Tele, Diff Lock, AirRide, Air-Ride Cab, Susp Dump, Tool Boxes, Wood Floor Deck, Pintle/Ball Hitch, Ramsey Winch, Double Frame, Aluminum Outside Wheels, AM/FM CD, AC (#5716) .. ....................................................$67,500

2012 Freightliner M2 28' x 102" Ledwell Tandem Rollback, 2ISC Cummins, 350 HP, 208K Miles, Auto. Trans., #18,000 Front Axle, Air-Ride, Wood Floor, Winch, Double Frame, Pintle/Ball Hitch, Cruise, ATC, Susp Dump, Diff. Lock, AM/FM, AC (#5641) ....................$67,500

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 300 HP, 289K Miles, 9 Speed, Winch, Cruise, Inter-Axle Lock, Air-Ride, Susp Dump, Tool Boxes, Pintle Hook, #19,200lb Front Axle, AM/FM CD, AC (#5557) ............ $62,500

2011 Landoll 317 Galvanized 53' x 102" Sliding Axle Trailer, 35 Ton, Air Ride Suspension, Wood Floor, Braden Winch, Conc. Load of 50,000lbs in 10', 8' 8" Top Deck, Crank Landing Gear, LP 17.5 Tires (#5729) .............................. $54,900

2012 Freightliner M2 28' Jerrdan Rollback, ISC Cummins, 300 HP, 247K Miles, 9 Spd, Double Frame, Wood Floor, Ramsey Winch, #19,220 lb Front Axle, Tool Boxes, Cruise, Air-Ride, Air-Ride Cab, Inter-Axle Lock, Susp Dump, AM/FM CD, AC (#5589) ................................ $67,500

2014 Peterbilt 348 28' x 102" Miller Hydraulic Tail Truck, Paccar PX-9 Engine, 350 HP, Allison 3000 RDS Automatic Transmission, #20,000 Front Axle, Warn Winch, #30,000lb Bed Capacity, Wood Floor, Double Frame, 9' Tail, 5' Flip Tail, Exhaust Brake, Cruise, Diff. Lock, Air-Ride, Susp Dump, All Aluminum Wheels, 5.29 Ratio, AM/FM CD, AC (#5684) ................................ $92,500

2012 Trail-King TK70CF-352 35' x 102" Flatbed w/ Piggyback Forklift Setup, Wood Floor, Conc. Load of 50,000lbs in 10', Sliding Ratchets and Straps, Tool Box, Crank Landing Gear, 5' Headboard, 11R 22.5 Tires (#5587)............ .................................................... $19,900

2012 Freightliner M2 28' x 102" Ledwell Rollback, ISC Cummins, 350 HP, 247K Miles, Allison 3000RDS Automatic, Winch, Wood Floor, Cruise, Double Frame, Tool Box, Pintle/Ball Hitch, Cruise, Tilt/Tele, ATC, Diff. Lock, Air-Ride, Susp Dump, #18,000 Front Axle, AM/FM, AC (#5568) ..................................$64,900

2013 Towmaster T-14DT Tilt Deck Gooseneck Trailer, 22' Deck, 18' Tilt Deck, 81" Wide, Wood Floor, 12,000lb Buyers Electric Winch, 30' Total Length, Crank Landing Gear, Aluminum Wheels, Electric Brakes, #19,100 GVW (#5593) ...... ......................................................$5,900

2012 Freightliner M2 28' x 102" Jerrdan Rollback, ISC Cummins, 300 HP, 245K Miles, 9 Spd, Wood Floor, Diff Lock, Air-Ride, Susp Dump, Cruise, Winch, Air-Ride Cab, Double Framed, Reese, Tool Boxes, #19,220 Front Axle, AM/FM CD, AC (#5505) ...................................... $67,500

www.HammerTrucks.com

Page 16 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Southeast Border Rents borderequipment.com Augusta, GA 706-737-7253 Norcross, GA 770-609-8299 Crosby Equip Co., Inc. crosbyequipmentco.com Douglas, GA 912-384-4664 Macon, GA 478-257-8300 Diamond Equip, Inc. diamondequipment.com La Vergne, TN 615-641-1100 Don Allison (Compact Excavator Only)

diamondequipment.com Arley, AL 800-669-6450 Earthmovers Construction Equip earthmoversfl.com Apopka, FL 407-401-8956 Fort Pierce, FL 407-401-8956 Tampa, FL 336-425-5235 First Choice Farm and Lawn firstchoicekubota.com Union City, TN 731-885-1315 Dyersburg, TN 731-882-1855 Savannah, TN 731-925-2141 Mayfield, KY 270-856-4355 Grove River groveriver.com Richmond Hill, GA 912-756-7854

hceamericas.com

Highway Equip Co. highway-equipment.com Troutville, VA 540-992-4150

Southern Lift Trucks southernlift.com Mobile, AL 251-278-2247

Larry Stovesand

Springdale Tractor Springdale, AR 479-361-2513

(Compact Excavator Only)

lsetractor.com Murfreesboro, TN 615-442-6738 May • RHI mayequip.com robshydraulics.com Clayton, NC 919-773-1424 Grimesland, NC 252-752-1500 Lexington, NC 866-629-3784 N Benson, NC 919-243-0631 Rock Hill, SC 919-612-6300 Summerville, SC 843-501-0566 Columbia, SC 803-865-1002 Greenville, SC 866-629-3784 Mid South Machinery gomidsouth.com Gulfport, MS 228-867-1555 Jackson, MS 601-948-6740 Tupelo, MS 662-690-6553

State Machinery statemachineryeq.com Kenner, LA 504-464-0431 Stone Equipment Co., Inc. stoneequipmentco.net Alabaster, AL 844-786-6373 Montgomery, AL 844-786-6373 Van Keppel vankeppel.com North Little Rock, AR 501-945-4594

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 17

THE HARDEST WORKING WARRANTY ON THE JOBSITE

5 YR 3 YR

With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.

STRUCTURAL

STANDARD

*Limited lifetime warranty on the center pin.

hceamericas.com

Page 18 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The W Wor orldwide e Leader in Concrete Paving T Technolo echnology

ww ww.gomaco.com m ❘ info@gomac o co.com GOMACO offers the full range of concrete slipform p pavers, curb and d gutt tter machiness, placer/sp er/spreaders, texture/cure machines and bridge/ idge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+ G ® control system, created in-house by our soffttware engineers from the wants and needs ds of contractors paving in the field. At the heart of GOMACO equip fie pment is our passion for concrete and our commitment to our customers. We look fo forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs.

CAROLINA CAT

BLANCHARD MACHINERY

GREGORY POOLE

Serving Western North Carolina (800) 277-2080 CarolinaCat.com

Serving South Carolina (844) BLANCHARD (252-6242) BlanchardMachinery.com

Serving Eastern North Carolina (800) 447-3112 GregoryPoole.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 19

Page 20 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Dobbs Equipment Raises Funds for Construction Angels

(L-R): Jennifer McCloskey, Construction Angels; Adam Tschetter, Dobbs Equipment; Edward Dobbs, Dobbs Management; and Kristi Gibbs, Construction Angels, at the check presentation. Additional funds that came in after the check presentation raised the total to more than $140,000.

(L-R): Ashley Klein, Jonathan Thiel, Richard Klein and Mark Hooper, all of AK Glazing Contractors Inc., Fort Lauderdale, Fla., came in second place.

(L-R): The winning foursome, of Alpha Wrecking, was made up of Jon Wood, Jeff Grove, Chris Willford and Kyle Lane.

Dobbs Equipment hosted its inaugural charity golf outing benefiting Construction Angels in Boca Raton, Fla. Initially raising $114,300, additional funds that came in after the check presentation raised the total to more than $140,000. “Our customers and vendors knocked it out of the park,” Dobbs said on its website. “We are honored that our first year was such a success and look forward to going bigger and better next year for such a great cause.” “At Dobbs Equipment, our mission has always been to support our customers from end to end in the markets we serve. We realize that this mission provides us a unique opportunity and desire to go above and beyond for the customer. This cause is near and dear to our hearts, as we all know families who have dealt with a tragic loss,” Adam Tschetter, president, said. Construction Angels provides financial assistance and grief counseling to the children and spouse left behind when a construction worker has a fatality on the job site. It offers construction scholarship opportunities to qualified applicants and additional scholarships to surviving children of a fallen worker. “Our vision is to be there for families who have lost a loved one as a result of a work-related accident. Our goal is to be an immediate source of relief, assistance and a conduit for continued support,” Construction Angels said on its website. “Construction Angels wants to make an everlasting impression and impact within the industry, one family at a time while honoring those who have given the ultimate sacrifice.” Construction Angels has six core values: • Ambition: An earnest desire for honorable achievements and the willingness to attain it. • Nurture: Caring, protecting and encouraging the growth of our charity. • Generosity: Virtue of giving without obligation and hope of reward. • Efficient: Acting effectively with minimum of waste, expense and time. • Leadership: The initiative to motivate, lead and work with others to achieve common goals. • Service: Work that provides hope, comfort or assistance to benefit the construction community. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 21

563-8 872-44112 112

Bellevue (Dubuque), ubuque), Iowa sales@jjscheckel.com jscheckel.com RENT OR

BUY!

2002 CA ATT D11R - $1855,000

2009 CA ATT D10T - $468,000 $ ,

2005 CA ATT D10T D10T - $348,000 $ ,

7PZ High g Horse series, Runs R andd oper p ates a to spec p , RJG S#, 1 Owner since new, 8,3000 hours h on $683,000 $ U Blade, SS ripperr,, NNew rodd & main bbearings g installed. bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Documented CAT Dealer Complet d y stockp kpile il machine hi U-blade A/C, HHeaat. Could p e Rebuild, SS ripper pp r,, Track ggroups p near new. Easy E y dut paint, otherwise very straight Twin tilt, tilt Well maintaine i i ed, Clean, Good from multinational i h tractor from good home. U blade, Twin G d U/C. U/C l i i l companny. AAs nice i as they h come!!

RENT OR

2015 Deere 1050K - $328,000

4,650 hours, SU Bladee,, Multi M l Shank Ripper pp r,, Topc p on hi GX60 Full Auto GPS syst sy em comes withh machine. Straight, clean & oriiginal i Midwest dirt machine.

RENT OR

BUY!

6,200 Hours, 2 Year Year factor ffac y warrrantyy remaining, 32.8’ Boom, 14.4’ Stick, 66”” Bu Bucket. 1 Ownerr,, Excellent conditioon.

8,500 Hours, 2,700 700 at a idle. CAT Accugr g ade d , AROO, O, GPS readyy. Erops p , A/C, DDiff steerr,, GGoodd undercarriage g. Original lean machine. machine Rent/Lease or BBuy. i l, super clean

RENT OR

BUY!

2018 CA ATT 390FL,, A02819 - $628,000 , 2017 CA ATT 390FL,, A028991 - $628,000 2006 Komatsu PC800 00LC-8 - $33 $338,000 , 2020 CA ATT 330 Next N Gen - $258,000 ,

5,780 Total Total hhrs, hrs 1,550 at idle. 2 Year Year pa pparrts/labor /l b Cat C Warranty rremains emains. 1 Ownerr.. Super p straig B ight. 27’’ Boom, d li EExxcellent U/C. 14’’ Stick S k, 77”” BBucket, Aux hydraulics,

2012 CA ATT D6T D LGP VP PA AT - $139,000 $ ,

7,200 Original g hrs, Reputa p tion t machine, Straigh g t, clean, original gi l. 11’1 11’10” 10”” SStick, i k 72”” BBucket, Goodd U/C w/ 32”” track d Komatsu deaaler tested & inspected. tr k pads.

1,200 Hours, 2D Grade G de Control, C l Auxiliary A ili y hydraulics, d li Tool control, 10.6’ 6’ Stick, 4 years remaining i CAT AT pre premier warranty.

RENT

2013 CA ATT 329EL - $114,000 A ,

4,700 Hours, New 54”” buck bucket, 10’6” ’ ” SStick, k Fullyy

loaded, Longg and nd Wide UC, Pattern changer g r,, Excellent Ex ll

condition, OOriginal i paint. Rent/L /Lease or Buyy..

BUY!

2014 CA ATT 988K - $338 $338,000 8,000

9,417 Original g hrs, 2 Year Yearr, FFactoryy Powerttrain Warranty remains. Yard spade p noose bucket, i RRide id control. 10 Yar Straight, clean, fully testedd andd readdy d to go!!

2012 CA ATT 980K - $238,000 $ ,

5,200 Total hours, 1,800 Idle dl ho hours in neutral.l Load scale, Original paint, Very nice low hour unit.

(2)2015 ) Volvo A40G G - $$228,000 , EA. Matching M hi g ppairr,, 6,100 Hou H urs, Tailga lg tes, Excellent E ll rubber reputaation trucks with full bb r,, 1 Owner O documentedd history.

RENT OR

2013 CA ATT 740B 7 - $168 $168,,000

12,500 Total frame hoours, 3,810 hours were at idle, Radial tires, Tailgatee, Original ppaint, CAT dealer R /Lease or Buyy.. maintained, Service history. Rent/L

2011 CA ATT 740B - $128,,000

13,890 Hours, Higher g hours but good g reputable truck, Fuullll repair p i hist hi ory,y, GGoodd tires, i di Clean condition.

RENT OR

BUY!

Holmes 30T Dump p Wagon g - $45,000 $ ,

2015 C CA ATT 836K - $458,000 $

2008 C CA ATT C CP5 CP56 56 - $89,000 $ ,

B POWERTRAIN PLUS REBUILDS

HIGH REACH CONVERSIONS

HOLMES SMOOTH DRUM ROLLERBLADES

2018 CA CATT RM RM500B M500B - $580 $580,000

2016 CA CATT 627K - $$478,000

FFabricated b d from f usedd articulatedd ddumpp truckk chassis. h 1 Year Year factory fac y Warranty rremaining emainingg, g 8,275 Totall hours, 84”Vibratoryy ppad foot, 2,585 85 Hrs Hrs, Enclosed l d Cab, A/C, 978 Hours. Remaining 2 year par p ts/service factory 5,070 Hours, Pussh/Pull, Erops, A/C, 33.25+29 Rubberr,, Hyydraulic brakes, Standard bbullll hi hitchh with 360° 2,937 at idle, onlyy 5,338 p ation. Service Front blade option, p i Original g l paint, Veryy well maint’d, Cat Warrantyy. 1 Own 3388 hhours iin oper Original g ppaint,t Full documented history,y, Under O ner machine, hi Universal rotor oscillation, HD Jack stand, Good tires, vvery nice unit. history since new. Excellen feet. Clean, ready tto work. Fully g Rent/L ease or Buyy.. il E ll t feet l ready l SServiced i d & ready d to go. R d l care since new, will not disappoint! dealer for both Asphalt RReclamation or Soil Mixing.

NEW! Ready to ship!

2006 CA ATT D10T Rebuild In n Process - $885,000. Zero hour Powertrain Plus, OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

2017 CA ATT 349FL UHD D - $$458,000 , Holmes 11F - $23,00 , 00 / 16F - $29,000 $ 2015 Screen Machine JXTT Crusher 2017 Screen reen Machine 514TS3 Zero hours on custom Ultr Ul a-High H gh Reach R h Demolition l 2 Models, 11’ or 16’’ cuttingg width. Made in Iowa. - $$288,000 , Mobbile Jaw Crusherr,, 1,800 , Hours, H , Spyder py - $$189,000 189,000 , Triple p Deck Mobile Screen Conversion. 96’6” ’ ” Totall reach, u k attachh boom b & h Quick llines, Hyddraulic l tiltl cabb, High H hest qualit l y pkkg.

visit

Construction gr g ade d , extremee dduty. For hhaull road roadd & site 26” 6”” + 45”” JJaw size, 376 HP CAT C9.3 Enggine, Capable p lleveling l , compacting & sealil ng ddir di t prior to rain event. of crushed concrete or rock. As nice ass they h come!!

JJSccheckel.com

and w watch our new company video! deo!

Pl 1,760 hours Plant, urs, produc d es 4 pproduct d sizes, with a 5th scalped oversize prroduc oduct on the loading grizzly.

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FL, L, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel.com | www. jjsscheckel.com scheckel com | follow us for forr daily updates:

Page 22 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 23

EXPERTS SAY YOU CAN ONLY FOCUS ON ONE THING AT A TIME. We chose articulated dump trucks

Contact your local dealer to learn about our great offers. TerexTrucks.com

Page 24 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tennessee DOT Region 1 photo

Considering the size of the project, the area is divided into seven smaller phases — four in Blount County and three in Knox.

The current contract for the three projects under construction was awarded to Charles Blalock & Sons Inc.

Highway Reconstruction Set for Mid-2023 Completion ALCOA from page 1 a steady pace despite the pandemic last year, and consistent increased capacity, improved safety and correction of any updates are being shared on the TDOT timeline as the projother roadway issues. Additional goals included minimizing ect progresses. impacts to environmental resources within the project area This section follows the existing alignment, widening the and improving pedestrian and bicycle connectivity. roadway to six lanes (three in each direction) with a concrete Considering the size of the project, the area is divided into median barrier wall. Interchanges and frontage roads provide seven smaller phases — four in Blount County and three in safe access to other local roads, businesses and neighborKnox. hoods. A new interchange at Montlake Drive; three new The new plans will help separate local traffic from com- bridges to provide connection to the new frontage roads; and muter through-traffic, while allowing access to local busi- three roundabouts were part of the construction. nesses. New interchanges will be constructed for access to A greenway along the southbound section provides a conother areas, including McGhee Tyson Airport, a planned nection between the two counties. The second section under development in Alcoa, and part of Alcoa Highway referred construction in Knox is from north of Little River to south of to as the Motor Mile, along with a new pedestrian greenway. Maloney Road. This stretch of 2.2 mi. will see improveCommuters will see widening of part of the highway to three ments following the existing alignment and consist of lanes in both directions, with 12-ft. shoulders and a concrete widening the existing roadway to six lanes (three in each median barrier wall. direction). Two new interchanges are planned and no left Tracie Widner, the construction supervisor managing the turn movements will be allowed. projects in Knox County, shared there are three projects This redesign provides access to Alcoa Highway via onoverall under construction at the moment and the other four and off-ramps. Four new bridges provide connections to are in some stage of design and right-of-way acquisition. As either access ramps or frontage roads. Special measures will transportation projects are developed in three phases — pre- be taken to minimize impacts to utilities, the railroad, and liminary engineering, right-of-way (ROW) and construction lakes and streams in the area. — each phase of the project is in different stages of work in “Weather was a concern for some of the excavation being progress at this time. done to widen the corridor and several retaining walls were Construction began in April 2016 with an estimated date see ALCOA page 40 of completion for mid-2023. In consideration of the vast area affected by roadwork and the residents impacted as a result, TDOT has hosted public outreach prior and during construction, providing information on plans and upcoming detours so as to not heavily disrupt traffic. Work first commenced on the stretch from Maloney Road to Woodson Drive in Knox County. Wall 8 in that process demanded additional time and attention — a 2,000ft. long, 65-ft. high structure (cost: $18,000,000) with 332 pile (32 to 127 ft.) and 1,151 anchors (average 100 ft.). “There’s also a lot of fast-moving Tennessee DOT Region 1 photo traffic so that certainly has been a chal- Work entails $300 million improvements, including reconstruction and lenge,” said Widner. widening of what TDOT terms an ‘urban principal arterial roadway’ on But it appears work has continued at the National Highway System.

Tennessee DOT Region 1 photo

Equipment used included pickup trucks; concrete mixer trucks; track drills; caisson drills; trackhoes; backhoes; concrete slipform machines; bulldozers; paving machines; chippers; grinders; lifts; cranes; pumps; skid steers; and welding machines, among other machinery.

Tennessee DOT Region 1 photo

Goals of the project include minimizing impacts to environmental resources within the project area and improving pedestrian and bicycle connectivity.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 25

Page 26 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 27

WE’RE RIGHT THERE WITH YOU The work may be under your feet, but you’re looking ahead—to the next challenge and the next deadline. Your local Cat Dealer offers sales, service and support for the full Weiler commercial paving line, including pavers, static compactors, pneumatic rollers and tack distributors. Engineered innovations for the demands of the commercial paving contractor.

BLANCHARD MACHINERY

CAROLINA CAT

GREGORY POOLE EQUIP. CO.

South Carolina 3151 Charleston Hwy West Columbia, SC 29172 844.252.6242 BlanchardMachinery.com/paving

Western North Carolina 6215 Swiggett Road Greensboro, NC 27409 336.323.5375 CarolinaCat.com/paving

Eastern North Carolina 4807 Beryl Road Raleigh, NC 27606 800.451.7278 GregoryPoole.com/paving

Page 28 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Attachments & Parts Pages 29-35

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Kubota Introduces Attachments for Stand-On Track Loader

The compact mount is performance-matched for the BR360 and BR460 breakers for optimum efficiency.

Kubota Tractor Corporation announced a new line of attachments now available for its SCL1000 stand-on track loader, which hit the market itself just this year. The SCL1000 became available earlier this year and comes equipped with wide tracks, narrow body and a rated operating capacity (ROC) of 1,000 lbs. to meet the demands of landscape contractors and rental yards alike. And now, with the new attachment package, contractors will be able to add compact buckets, trenchers, pallet forks, a compact mount for breakers and even a skid auger or power rake to the SCL1000, increasing functionally on a job site. “The SCL1000 was introduced into the marketplace earlier this year with overwhelming excitement and market demand,” said Tim Boulds, Kubota construction equipment product operations manager. “We are thrilled to enter the stand-on loader segment with the SCL1000, and these attachments will further its capabilities to meet a multitude of contractor demands and applications.” Kubota is announcing five new attachments for the SCL1000,

The CTR compact trencher is available in three sizes with 30-, 36- and 48-in. trenching depths, and ranges in chain widths from 4 to 10 in.

The CPF12 pallet fork comes in 36- and 42-in. fork length options and helps contractors and material handlers in a variety of industries efficiently move loads from trailers, flatbeds or racking systems.

including: • Compact Buckets — There are six compact buckets available for the new SCL1000, including both standard and high capacity options. Standard capacity buckets include the CL136L, CL142L, CL236L and the CL242L, which are either standard 36- or 42-in. bucket options and available with bare edge, bolt-on edge or bolt-on teeth. High capacity buckets include the CL148H and CL248H, both of which offer 48-in. bucket options with bare edge, bolt-on edge or bolt-on teeth.

• Compact Pallet Forks — The CPF12 pallet fork comes in 36and 42-in. fork length options and helps contractors and material handlers in a variety of industries efficiently move loads from trailers, flatbeds or racking systems. The pallet fork boasts a 1,200-lb. capacity, Category II hitch and spill guard. The CPF12 has an adjustable fork width with springloaded toggle to lock in place. • Compact Power Rake — A new compact power rake, the CSR10, also is available for the SCL1000 with a 48-in. working

width and heavy-duty Category II hitch for both landscape and construction applications. With its center pivot, it allows narrow width access. Side plates can be added to angle the CSR10, making seedbed prep a breeze. And, the power rake features tubeless tires with sealant and easy, adjustable hydraulic angling. • Compact Trencher — The CTR compact trencher is available in three sizes with 30-, 36- and 48in. trenching depths, and ranges in chain widths from 4 to 10 in. Chain styles are designed for efficient

digging of trenches and ideal for irrigation and utility contractors, making it a popular rental tool. • Compact Skid Auger — The CSA10 compact skid auger has a pendulum mount and features a reversible gearbox with a 2-in. hex output shaft to attach to a variety of augers. Landscapers and contractors will find the CSA10 is a durable tool for digging holes for footings, fences, signs or trees. • Compact Mount for Breakers — The compact mount is performance-matched for the BR360 and BR460 breakers for optimum efficiency. This unit is ideal for demolition of concrete and rock, and as a rental tool where optimum power is required. The SCL1000, and attachments, are available at Kubota authorized dealers now. For more information, visit KubotaUSA.com. 

Page 30 • June 30, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

PLAN. PROVIDE. TRAIN. w w w.osha.gov v//stopfalls

FALLS FROM LADDERS, SCAFFOLDS AND ROOFS CAN BE PREVENTED!

www.osha.go osha.gov

£ nää ÎÓ£ "- ÊÈÇ{Ó®ÊUÊ/ / 9Ê£ nÇÇ nn xÈÓÇ

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 30, 2021 • Page 31

THIS MONTH’S SPECIALS 2082500022 - Two turntable bearings for a Komatsu PC400-3. Avon# 2055B3................................................................................$7,175 Each 2072500022 - Two turntable bearings for a Komatsu PC300-3. Avon# 1555B3................................................................................$4,475 Each 2052500021 - Two turntable bearings for a Komatsu PC200-3. Avon# 1148B4................................................................................$3,450 Each 24100N418F1 - One turntable bearing for a Kobelco 909. Avon# 1551B9 ................................................................................................$2,075 21400N3354F2P1 - One turntable bearing for a Kobelco 907C or K907C. Avon# 1447B2 ......................................................................$4,850 KBB0282 / D28001 - One Link-Belt turntable bearing for a LS3400C. Avon# 1249B5 ..............................................................................$3,950 TH103075 - One John Deere turntable bearing for model 792. Avon# 1556B8 ........................................................................................$3,500 TH108810 or AT190766 - One John Deere turntable bearing model 490D and 495D. Avon# 1143B9 ....................................................$1,100

Mobro Marine Sells CRANE PARTS You will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directly from the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does this mean we have the part you need in stock, it also saves you money. Because we buy in volume, we can buy for less and pass the savings on to you. Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime. We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type.

We sell high quality genuine OEM parts from the following manufacturers: • Terex • American • Bucyrus-Erie • P&H • Kobelco • Koehring • Lorain • Northwest Crane

MOBRO MARINE, INC. Please Contact Billy Harper or Tony Cruz at 904-733-1822 Hablamos Español

www.mobromarine.com/parts/php

Page 32 • June 30, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Komatsu Introduces Range of New Hydraulic Breakers reduce vibration to the excavator, adding to operator comfort. The simple design of the JTHB-G hydraulic breakers translates to reduced maintenance and fewer parts to buy, to help lower equipment-running costs. A one-year warranty comes with all G-series breakers and also applies to breakers used for mining and quarry applications.

Breakers are a flexible and crucial attachment used for a wide variety of jobs, including tunneling, trenching, foundation removal, dredging, bridge demolition, quarry excavation, mining and more. To meet growing demand in North America, Komatsu is expanding its product line of hydraulic breakers. Designed and tested for compatibility with Komatsu excavators from the PC78 up to the PC490, the high-percussion efficiency and unique variable energy technology of these breakers are built to provide high production in multiple applications, according to the manufacturer. To protect the breaker, carrier and operator, Komatsu built in several features and benefits. The breakers have an accumulator that eliminates hydraulic pump cavitation to prevent flow surges back to the carrier hydraulic tank. By recycling high-pressure oil internally, this allows more energy with a lower flow, to reduce hydraulic pressure spikes and protect the carrier’s hydraulic system. JTHB-G Line of Breakers Easy to maintain with only two moving parts, the JTHB-G line utilizes a hybrid design of hydraulic flow and pressure along with a nitrogen-filled chamber that provides striking energy. The tie-rod design is engineered for durability in tough rock and concrete applications. Adding to longevity and durability, blank firing protection is standard and includes a hydraulic cushion at the base of the cylinder, to reduce metal-to-metal contact. Larger models feature special key slot dampers that help

The breakers have an accumulator that eliminates hydraulic pump cavitation to prevent flow surges back to the carrier hydraulic tank. By recycling high-pressure oil internally, this allows more energy with a lower flow, to reduce hydraulic pressure spikes and protect the carrier's hydraulic system.

JMHB-H Line of Breakers Compact yet powerful, the JMHB-H attachments are accumulator-type hydraulic breakers for a variety of rock and concrete demolition applications. Unlike gas-fired breakers, the JMHB-H series does not require a nitrogen recharge. It is equipped with blank firing protection to help prevent piston movement via a hydraulic brake. For consistent impact power in a variety of environments, sound dampening housings help assure compliance with noise ordinances, even in urban applications.The breaker protects itself with a pressure regulator valve to prevent overflow, and its dampening system helps prevent damage to excavator booms and housing cracks. To enable the use of more powerful breakers on smaller excavators, a single powercell eliminates heavy tie rods to provide a better weight-to-power ratio on compact models, while the mounted automatic lubrication feature helps protect against dust and debris. Similar to the G-series, all H-series breakers come with a one-year warranty. For more information, visit komatsuamerica.com. 

Prinoth Announces Updates to M450s Mulching Head Prinoth is well-known for its crawler carriers but also manufactures a wide range of mulching equipment. Through its vegetation management division, Prinoth continuously invests in developing new products, including the latest updates of the M450s mulching head.

A Prinoth M450e-1900 on a Lamtrac skid steer clearing the edge of the forest.

Various Working Widths for All Skid Steers After the successful introduction of the 74.8-in.-wide M450s-1900 in the North American market, the head is now available in a smaller working width of 63 in. (M450s1600) and a larger one with 86 in. (M450s2200), to ensure every customer’s needs are met. Developed for a range of carrier vehicles from 70 to 180 hp and a hydraulic oil flow between 22.5 to 66 gpm, the M450s is a compact and powerful head for a variety of mulching applications. With the feature “Plug & Mulch”, the M450s is ready for simple set up on any skid steer loader, make and model. Hydraulic hoses with standard fittings are included in the package as delivered from the factory. The M450s gets its power from a 115cc Rexroth hydraulic motor with high-pressure variable displacement. For the 74.8-in.-head

a 170cc motor also is available, ideal for a volume flow range from 41.8 to 54.9 gpm. A new cogged belt drive transfers the power to the rotor. Bite Control System The rotor combines the BCS (bite control system) with two types of cutting tools. Whether steel knives or carbide teeth, the BCS-Rotor is perfectly balanced for less wear on bearings and high speed, meaning high productivity and a perfect finish, according to the manufacturer. In order to maintain the machine efficiently, an extensive spare parts network is available to customers in the USA. Furthermore, the operator can train their skills with online tutorials. Visibility is enhanced from the operators’ seat with a good line of sight to the work area, offering safe and productive mulching. The center of gravity is close to the carrier; therefore, it is easier to handle and provides less tipping or risk of roll over. For maximum safety, the M450s is equipped with anti-slip surfaces on the top of the housing and with two steps for a safe access to the carrier. For more information, visit www.prinoth.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 30, 2021 • Page 33

+HDGTXDUWHUUV V 1: WK 6W 0LDPL )/

0LGZHVW /RFDWLRQ 0D\ 5RDG 3HUX ,/

3+ - 7ROO )UHH - )D[ -

VDOHV#WHUDQLQGXVWULHV FRP

ZZZ WHUDQLQGXVWULHV FRP

([FOXVLYH PDQXID IDFWXUHUV RI

DQG

$WWDFKPHQWV

/EdZK h /E' /EdZK h /E' KhZ Z KDW> d >/E K& d dd d ,D Edd^ &KZ d dΠ ϯϳϰͬϯϲϱ ϱ y s s dKZ^ t/d, Ηs Η >/E< ' ^ƉĂĚĞ EŽƐĞ ZŽĐŬ ƵĐŬŬĞƚƐ

ZŝƉƉĞƌƐ

ϰϴΗ ;Ϯ͘ϮϲŵϹͿ͕ ϱϬ͟ ;Ϯ͘ϯŵϹͿ͕ ϳϮ͟ ;ϯ͘ϱϲŵϹͿ͕ ϴϰ͟ ;ϰ͘Ϯ ŵϹͿ͘ tŝƚŚ ^ŝĚĞ WƌŽƚĞĐƚŽƌƐ͕ ,ĞĞů ^ŚƌŽƵĚƐ͕ >ŝƉ WƌŽƚĞĐĐƚŽƌƐ͕ ZĞŝŶĨŽƌĐĞŵĞŶƚ WůĂƚĞƐ͘ ,ĂƌĚŽǆ ϰϬϬ͕ EDϰϬϬ ĂŶĚ YϲϵϬ ďƌĂƐŝǀĞ ZĞƐŝƐƚĂŶƚ ^ƚĞĞů͘

ϱϴ͟ ^ŚĂŶŬ >ĞŶŐƚŚ͘ tŝƚŚ ^ŚĂŶŬ WƌŽƚĞĐƚŽƌ͘ ZĞŝŶĨŽ ŽƌĐĞŵĞŶƚ WůĂƚĞƐ EDϰϬϬ ĂŶĚ YϲϵϬ ďƌĂƐŝǀĞ ZĞƐŝƐƚĂŶƚ ^ƚĞĞů͘

'ƌĂƉƉůĞƐ

^^ŬĞůĞƚŽŶ ƵĐŬĞƚƐ

ϲϲΗ tŝĚĞ y ϳϰ͟ ,ŝŐŚ DĂŶƵĂů 'ƌĂƉƉůĞ ϲϲΗ ǁŝƚŚ :ĂŐŐĞĚ dĞĞƚŚ͕ ZŽĚ ƐƐĞŵďůǇ ĂŶĚ ƌĂĐŬĞƚ͘ EDϰϬϬ ĂŶĚ Ă YϲϵϬ ďƌĂƐŝǀĞ ZĞƐŝƐƚĂĂŶƚ ^ƚĞĞů͘

ϳϴ͟ ;ϰ͘ϬŵϹͿ͕ ϴϰ͟ ;ϰ͘ϯŵϹϹͿ͘ tŝƚŚ ^ŝĚĞ WƌŽƚĞĐƚŽƌƐ͕ , ,ĞĞů ^ŚƌŽƵĚƐ͕ ZĞŝŶͲ ĨŽƌĐĞŵĞŶƚ WůĂƚĞƐ͘ ,ĂƌĚ ĚŽǆ ϰϱϬ ĂŶĚ YϲϵϬ ďƌĂƐŝǀǀĞ ZĞƐŝƐƚĂŶƚ ^ƚĞĞů͘

:( +$9 $9( $ :,'( 5$1*( 2) $7 $77$ 7$&+0(1 176 )25 &$6( &$7 $7(53,//$5 5 -2+1 92/9 '((5( '226$1 +<81'$ $, -&% .2% %(/&2 .20$7 $768 7 /92 (48,30(17 (

The Right Attachme ent ffor or the Right Job at the Righ ht Price® 7KH QDPHV DQG ORJRV &DWHUSLOODU &DWHUSLOODU .RPDWVX .RPDWVX -RKQ 'HHUH 'HHUH 9ROYR RU DQ\ RWKHU RULJLQDO RUULJLQDO HTXLSPHQW PDQXIDFWXUHUV DUH UHJLVWHUHG G WUDGHPDUNV RI WKH UHVSHFWLYH RULJLQDO HTXLSPHQW HTXLSPH HQW PDQXIDFWXUHUV PDQXIDFWXUHUV $OO GHVFULSWLRQV GHVFULSWLRQV QXPEHUV DQ QG V\PEROV DUH XVHG IRU UHIHUHQFH SXUSRVHV RQO\ 7HUD UDQ ,QGXVWU WULHV ,QF LV QRW DIILOLDWHG ZLWK WKH EUDQG PHQWLRQHG DERYH

Page 34 • June 30, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

Fully Automatic…

Rototilt Broadens QuickChange Coupler Program to Include Growing Compact Machine Sector

QuickChange can now be provided on tiltrotator models R3 to R8, as well as on QuickChange machine couplers in the 6.6 to 35.2 ton (6 to 32-t) range.

Development continues for Rototilt’s fully automatic quick coupler system QuickChange. Rototilt is expanding its line of next-generation quick coupler systems with three additional new sizes: QC45-4, QC45-5 and QC60-4, with delivery beginning May 2021. QuickChange can now be provided on tiltrotator models R3 to R8, as well as on QuickChange machine couplers in the 6.6 to 35.2 ton (6 to 32-t) range. And with the award-winning SecureLock safety solution as standard, the risk of accidents associated with improperly coupled quick couplers is reduced due to continuous monitoring of the quick coupler locking function in the machine coupler and tiltrotator. “We’re seeing a clear increase in interest among users of compact machines in using fully automatic quick coupler systems. We can now offer the latest technology for these

machines too, with the launch of QC45-4 and QC45-5,” said Sven-Roger Ekström, product manager. With Rototilt QuickChange for machine couplers, tiltrotators and tools, hydraulic and electronic tools can be changed without even leaving the cab. QuickChange is based on the S standard, which is compact and very robust. QuickChange is part of the common Open-S standard, which ensures compatibility between different manufacturers for the hydraulic interface between machine couplers, tiltrotators and tools. With Rototilt QuickChange, users can quickly disconnect the tiltrotator when the job doesn’t require tiltrotator functionality. The excavator becomes a full-fledged tool carrier that lets users work faster, smarter and with more precision, according to the manufacturer. For more information, visit rototilt.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 30, 2021 • Page 35

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

STONE EQUIPMENTCO., INC. www.stoneequipmentco.com

COMPANY WRENCH www.companywrench.com Lakeland, FL 863-937-6829 866-262-4181 Charlotte, NC 908-859-4680

Smithfield (Raleigh) NC 919-938-8145 855-562-3526

Lexington (Columbia) SC 803-520-0032 855-562-3526 Knoxville, TN 865-766-2571

Montgomery, AL 334-430-8431

Alabaster (Birmingham), AL 844-786-6373

Villa Rica, GA 678-367-6504

Page 36 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

mhl 375 F -SERIES

Company Wrench www.companywrench.com 3729 N Frontage Road Lakeland, FL 33810 863-937-6829 11301 Reames Road Charlotte, NC 28269 980-859-4680 125 Wilsons Mills Road Ext Smithfield, NC 27577 919-938-8145

STRONG. RELIABLE. E EFFICIENT.

141 Brickyard Road Lexington, SC 29072 803-520-0032

Discover Morre Fuchs World- Class Material Handlers

Highway Equipment Company www.highwayequipment.com Roanoke Location 8071 Lee Highway Troutville, VA 24175 540-992-4150

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 37

www.companywrench.com

www.ScottCompanies.com Alexandria, LA 318-448-1647 Shreveport, LA 318-226-9696 Monroe, LA 318-388-9300

Little Rock, AR 501-455-5955 Ft.Smith, AR 479-648-1600

Springdale, AR 479-751-4242 Texarkana, AR 870-772-0204

Memphis, TN 901-547-8008 LaVergne, TN 615-793-3888 Jackson, MS 601-373-4600

3729 Frontage Road Lakeland, FL 33810 866-294-6103 863-937-6829

125 Wilson Mills Rd. Extension Smithfield, NC 27577 855-562-3526

141 Brickyard Rd. Lexington, SC 29072 866-262-4181 803-520-0032

11301 Reames Rd. Charlotte, NC 28269 980-859-4680

6325 Central Avenue Pike Knoxville, TN 37912 865-766-2571

www.highway-equipment.com 8071 Lee Highway Troutville, VA 24175 540-992-4650

Page 38 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 39

Larger control valve and electronic controls deliver smooth, precise performance and up to 12% faster cycle times

Shift-long comfort from a spacious cab, automotive-grade seat and ergonomically-designed, fullyadjustable arm rests

Award-winning Wide Angle Visual Enhancement System (WAVES) provides seamless 270° panoramic view

Ground-level access to routine service points cuts daily maintenance down to just minutes

LINK-BELT MID ATLANTIC www.link-beltmidatlantic.com Ashland, VA 866-955-6071 Chesapeake, VA 800-342-3248 Frederick, MD 833-546-5235

Robust undercarriage with innovative side-frame design is easier to clean

2115 N. Thompson Lane Murfreesboro, TN 37129 877-200-5654 5200 Hollywood Ave. Shreveport, LA 71109 800-548-3458

CROSBY EQUIPMENT COMPANY, INC. www.crosbyequipmentco.com 1826 South Peterson Avenue Douglas, GA 31535 912-384-4664 5368 Hawkinsville Rd. Macon, GA 31216 478-257-8300

364 Bob Jobe Rd. Gray, TN 37615 855-201-7453 10110 Roberts Way Covington, GA 30014 770-788-0888 7651 Theodore Dawes Rd. Theodore, AL 36582 251-653-5955 825 31st Street North Birmingham, AL 35203 205-323-6108

MID SOUTH MACHINERY, INC. www.gomidsouth.com 3233 Highway 80 West Jackson, MS 39204 601-948-6740 3145 Cliff Gookin Blvd. Tupelo, MS 38801 662-690-6553 14336 Seaway Road Gulfport, MS 39503 228-867-1555

Tier 4 Final engines deliver up to 12% improved fuel economy…and no DPF to maintain

HEAVY MACHINES, INC. www.heavymachinesinc.com 3930 East Raines Road Memphis, TN 38118 800-432-8902

EQUIPMENTSHARE www.equipmentshare.com 10179 US-78 Ladson, SC 29456 843-709-2458 145 Thunderbird Dr. Richmond Hill, GA 31324 912-400-0752 2919 E. Napolean St. Sulphur, LA 70663 337-284-9804

www.gsequipment.net Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Ft. Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892 Orlando, FL 407-859-9160 Jacksonville, FL 904-268-4400

Page 40 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alcoa Highway Undergoes Extensive Reconstruction ALCOA from page 24

being installed,” said Widner, when asked about any obstacles to progress. The current contract for the three projects under construction was awarded to Charles Blalock & Sons Inc. in charge of everything from asphalt and paving, and building materials and supplies, to concrete, road construction, trucking and utility installation. As general contractor, they performed all road, bridge and retaining wall construction and related grading, as well as providing pumping, rock slinger services, precast panels for retaining walls and some concrete. Equipment used included pickup trucks; concrete mixer trucks; track drills; caisson drills; trackhoes; backhoes; concrete slipform machines; bulldozers; paving machines; chippers; grinders; lifts; cranes; pumps; skid steers; and welding machines, among other machinery. Multiple subcontractors have been recruited to work on paving, excavation, signs, striping, guardrail, hauling and other related work activities. Temporary shoulder and lane closures, lane shifts and reduced speed limits were implemented to ensure safety for workers and commuters. In Blount County, the stretch from Hall Road to an interchange proposed at Tyson Boulevard includes realignment and reconstruction for 1.5 mi. This includes an overpass at the Hunt Road junction, where the bridge structure has been deteriorating from serving almost 10,000 vehicles daily. The old bridge is a 280-ft.long concrete and steel structure, but the new bridge will be a pre-cast, prestressed bulb-tee concrete superstructure with a concrete deck that is 493 ft. 6 in. in length and nearly 74 ft. in width. The new alignment will be a four-lane, controlledaccess facility, allowing for two lanes in each direction with no signals or intersections. Stacy Weaver, TDOT region 1 project development manager overseeing the roadway projects in Blount County shared that the completion of the entire project depended on

Tennessee DOT Region 1 photo

With traffic along East Tennessee’s Alcoa Highway increasing, TDOT embarked upon a highway corridor improvement project in 2016, spanning Blount and Knox counties.

state and federal funding for each phase. Speaking on the environmental impact to Blount County, he said, “There were some major impacts to the Russell Branch tributary, other wetland impacts, and some from a noise aspect in certain sections of Alcoa Highway to accommodate but we study that as part of the environmental process and mitigate it as we go.” When all construction work associated with the Alcoa Highway, originally built in the 1960s, is finally completed in a few years, the entire stretch will experience a streamlined flow of traffic on a roadway that can handle the capacity demanded of it accompanied by updated infrastructure. Until then, the TDOT teams and contractors are hard at work to ensure the project progresses in a timely manner while ensuring safety for all.  CEG

Tennessee DOT Region 1 photo

Four new bridges provide connections to either access ramps or frontage roads. Special measures will be taken to minimize impacts to utilities, the railroad, and lakes and streams in the area.

The current construction will help result in increased capacity, improved safety and correction of any other roadway issues.

Pages 41-51

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

MB Crusher Helps Every Site Become Recycling Centers Produce your building material, using your heavy equipment, wherever the job site is located. This is the easiest solution for many companies now that procurement is becoming more complex, expensive and it takes longer. And it is also the practical solution when the construction sites are located in areas where heavy vehicles have a hard time reaching it, where there aren’t connecting roads or in historical centres with traffic restrictions. For example, in Bulgaria, a company had to demolish an old house and had limited When a landslide damaged the Santo Spirito bridge in Italy, an MB crusher and screening bucket helped the contractor exceed standards. space. They installed an MB-L160 crusher bucket on the Case backIn France, a company constructing hoe loader they already had on-site, making 745 housing units used an MB-S18 it quick and easy to load the debris, crush it screening bucket to select the fine materials. on site and obtain quality material that they could reuse as the foundation for the new homes. They saved time and reduced their expenses: they didn’t need to process the material further by transporting it and repurchase it from the recycling centre or a quarry. The result? A material that all companies can obtain on-site at no extra cost. This applies to those who work on large In Bulgaria, a company installed an MB-L160 crusher or small urban redevelopment sites or those bucket on a Case backhoe loader to demolish an old house. often involved in road works, bridge demolitions, or road construction, and those who disposal fees and material purchasing fees. also work in quarries. Materials can be Thierry Bastide, manager of Société Travaux Publics reused to create internal roads, fill holes and Bastide, the company in charge of the contract, said, “the reduce management costs by half. advantage is that you put back the materials that you have With MB Crusher’s equipment, you set extracted.” up an actual recycling center on-site, with The advantages don’t stop at reducing transportation fees the following advantages: independence and the cost of treating or disposing of waste but extend to from other suppliers, reduced processing the material’s quality. A recent example is when the Santo times, eliminating transportation costs, Spirito bridge in Puglia, Italy, was damaged by a landslide ready-to-use quality material. and needed to be demolished. The company used MB’s In Nimes, France, a company constructThey recycled all of the material: the MB-S18 screening crusher and screening bucket to crush and reduce the mateing 745 housing units needed to redevelop an old farm road for inter-district service and excavate and create a drainage bucket selected the fine materials, while the BF80.3 crusher rial they obtained down to their desired output size. They acquired material that exceeds the standards to be network for rainwater. In this context, where you need to bucket processed the larger rocks. The aggregates they excavate and produce a large amount of inert waste, the nec- obtained were reused immediately by laying them over the reused on the job site to create the road substrate that they drainage network trench, avoiding all logistical and material needed to reconstruct the bridge.  essary choice was MB Crusher’s equipment.

Page 42 • June 30, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

EvoQuip Launches Its New Falcon 1220, 1230 Range in U.S.

With their enhanced screen angle range, EvoQuip’s Falcons provide efficient classification of fines and are ideal for multiple applications and processing materials including sand and gravel, crushed stone, coal, topsoil and demolition waste, according to the manufacturer.

5064 FE ATURES )HDWXUHV DQ HQFORVHG HQJLQH FRPSDU WPHQW /DUJH IHHG RSHQLQJ DQG LQFK KDPPHUPLOO ZLWK D VHOI FOHDQLQJ DLU LQWDNH V\VWHP 2VFLOODWLQJ VWDFNLQJ FRQYH\RU $YDLODEOH RQ &$7 7UDFN 6\VWHP RU DV D $OVR PDQXIDFWXUHV D ZLGH YDULHW \ RI TXDOLW \ ¿I WK ZKHHO WUDLOHU W X E J U L Q G H U V 7KUHH GLI IHUHQW OHYHO RSWLRQV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS N Z WR KS N Z

action

cts in View produ Tech D e on th ura l! channe

TC-12 FE ATURES 7KLV SRZHU IXO FKLSSHU FDQ JULQG ORJV XS WR LQFKHV LQ GLDPHWHU DQG LV FRPSDFW VR LW FDQ EH HDVLO\ WRZHG WR D MRE VLWH KS N Z &$7 & GLHVHO HQJLQH 37 7HFK FOXWFK )HDWXUHV D VSULQJ ORDGHG IHHG ZKHHO ZLWK DGMXVWDEOH GRZQ SUHVVXUH

2SWLRQDO KHLJKW VHQVRU WKDW DXWRPDWLFDOO\ DGMXVWV WKH IHHG UROOHU WR PDWHULDO VL]H 2SWLRQDO K\GUDXOLF JDWKHULQJ ZLQFK ,QQRYDWLYH KRSSHU VDIHW \ OLJKW EDUV ZLWK HDV\ DQG LQVWDQW VKXW GRZQ $YDLODEOH ZLWK SLQWOH RU EDOO KLWFK

EvoQuip has launched the Falcon range of finishing screens to its product portfolio. The Falcon range consists of the Falcon 1220 and Falcon 1230, providing a solution for scalping, screening and stockpiling in self-contained units. With their enhanced screen angle range, EvoQuip’s Falcons provide efficient classification of fines and are ideal for multiple applications and processing materials including sand and gravel, crushed stone, coal, topsoil and demolition waste, according to the manufacturer. Andy Lawrence, EvoQuip sales director, North America, said, “This enhances the EvoQuip product offering and results in us having a more comprehensive product portfolio that will improve our versatility and make us more competitive in the marketplace. We have already seen these highly aggressive finishing screens opening up new opportunities for EvoQuip.” The first of the Falcons has landed in the United States with EvoQuip distributor Midwest Crushing and Screening. Midwest Crushing and Screening has been serving the Illinois and Wisconsin areas since 2008, providing world class mobile materials process-

ing equipment for rental and sale. Tim Scannell, president, said, “We are excited to be the first distributor in the U.S. to get the Falcon 1220. We have over 20 crushers, screeners and conveyors from EvoQuip operating across Illinois and Wisconsin and are delighted that the Falcon is now also part of our fleet.” In keeping with the EvoQuip range, the EvoQuip Falcon 1220 is a compact, easily transported machine that offers operators rapid set up and tear down times. The Falcon 1220 features a 12 by 5 ft. double deck incline screen with remote tipping reject grid, hydraulic screen tensioning of bottom deck and three on board hydraulic folding conveyors as standard, with the added option of a hydraulic shredder. The Falcons come with T-Link telemetry system fitted as standard, providing the customer with real-time information on the performance of their machine, meaning effective machine management and maximizing uptime. For more information, visit Midwest Crushing and Screening at www.midwestcrushandscreen.com, or call 866.52.CRUSH or visit www.terex.com/evoquip/en/. 

Environmental Products Group www.myepg.com 2525 Clarcona Road Apopka, FL 32703 407-798-0004

4410 Wendell Dr. SW Atlanta, GA 30336 404-693-9700

w w w.duratechindustries.net 6$9( $ /,)( '21·7 '5,9( +20( %8==(' %8==(' '5,9,1* ,6 '581. '5,9,1*

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 30, 2021 • Page 43

Mark Keenan 336-858-0186

North Carolina a • South Carolina Virginia • West Virginia

Special Inventory Sale

1-800-797-7276 • www.POWERSCREENMIDATL.com • Kernersville, N.C. • Leland N.C.

NEW, UNUSED, CEDARAPIDS PORTABLE PLANTS CRJ3750

BOTH UNUSED!

Including Run on Jacks, Extended Conveyor, Hydraulic Fold down Electrical Panel, Hydraulic legs under feeder/Hopper assembly

MUST SELL!!!

CRC380XHLS

Including Run on Jacks

HEAVILY DISCOUNTED CALL FOR BEST PRICE READY TO SHIP!

Call Mark Keenan 336-858-0186

Page 44 • June 30, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Cat MH3250, MH3260 Material Handlers Set New Standard The new Cat MH3250 and MH3260 models deliver high efficiency in demanding material handling applications. Replacing the historical Cat 330D MH and 345 C MH models respectively, the Next Generation MH3250 and MH3260 tracked material handlers boast longer maintenance intervals and improved fuel efficiency to decrease owning and operating costs up to 20 percent. An entirely new cab concept elevates operator comfort throughout the shift to increase productivity. Both models feature new mechanical variable-gauge undercarriages that flexibly improve machine transportation without sacrificing lifting performance. Track gauge retracts to 10-ft. 7-in. to lower transport costs and make moving the material handlers more efficient. When at the yard, gauge extends to 12-ft. 2-in. wide to increase stability and maximize lift capacities. The MH3250 and MH3260 deliver impressive capacities when working at their respective Replacing the historical Cat 330D MH and 345 C MH models, respectively, the Next Generation MH3250 and MH3260 tracked material 52-ft. 6-in. and 59-ft. 1-in. maxi- handlers boast longer maintenance intervals and improved fuel efficiency to decrease owning and operating costs up to 20 percent. mum reach, reducing the number ing to the manufacturer. of times the material handler has to be repoThe MH3250 and MH3260 deliver A range of attachments and reach options impressive capacities when sitioned at the yard to increase productivity. are available for varied applications to working at their respective 52-ft. increase operating flexibility. Increasing the 6-in. and 59-ft. 1-in. maximum Raising the Bar On Performance MH3250’s versatility, it can be equipped reach, reducing the number of Three different power modes — Power, with the ex-factory 25 kW generator for times the material handler has Smart and Eco — fine-tune power requireto be repositioned at the yard to magnet operation. Customers can choose ments to the job, so the new MH3250 and increase productivity. from a range of Cat Work Tool attachments MH3260 use less fuel than their predecesin different sizes to meet the site’s material sors without sacrificing machine performhandling and production needs. ance. Smart Mode automatically matches Work in Comfort engine and hydraulic power to working conFeaturing sound suppression for interior ditions to reduce fuel consumption, while noise reduction and rubber cab mounts to Power Mode provides maximum power to reduce vibration feedback, the all-new Next optimize productivity. The machines’ new Generation cab advances operating ease, fuel-efficient engines meet stringent U.S. comfort and productivity. All controls are EPA Tier IV Final emission standards and conveniently positioned in front of and withcan run up to B20 biodiesel. in easy reach of the operator to avoid unnecThese material handlers operate at up to essary movements. The left-hand console 8,530-ft. above sea level without derating tilts up to offer easy cab entry and exit. and offer standard high-ambient temperature Maintaining operator comfort throughout capability of 125 F (52 C) and cold-start the entire shift in a variety of climates, the capability of minus 25 F (minus 32 C). premium air-suspension seat is heated and New valve priority automatically places ventilated. hydraulic pressure and flow where it’s A large, 10-in. high-resolution touchrequired to increase material handling effiscreen monitor with jog-dial offers easy navciency. Their advanced electrohydraulic sysigation of the intuitive operator controls. tem provides the optimum balance of power, Using the new Operator ID function, differefficiency and load control. Auto warm-up ent machine operators can store their specific reduces the time it takes for hydraulic oil joystick and preferred power mode settings, warming in cold temperatures and helps prosee CATERPILLAR page 46 long the life of system components, accord-

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 30, 2021 • Page 45

A WIRTGEN GROUP COMPANY

T WO O POWERFUL PR RODUCTS. ONE GREAT RESULT. KLEEMANN CRUSHING AND SCREENING G PL ANTS

PERFORMANCE AND EFFICIENCY Y.. KLEEMANN crushing and screening plants can be optimally combined to create a quality end-produc t. An extensive selec tion of mobile jaw, impac t and cone crushers and screening plants, available as scalping and classif ying screens, open up the most diverse applications. With KLEEMANN plants, you’ll achieve the best results – in natural stone, recycling and mining. www.wirtgen e -group.com

WIRTGEN AMERIC A , INC . · 6030 Dana Way · Antioch, TN 37013 · Tel: (615) 501- 0600 · Fax: (615) 501- 0691

Florida, North & South Carolina 1-888-LINDER8 www.linder.com www.facebook.com/ linderindustrialmachinery

TRACTOR & EQUIPMENT COMPANY

Alabama, Florida (Panhandle) & Georgia 205-591-2131 www.tec1943.com

Kentucky, Indiana & Tennessee 877-538-3221 www.bramcomps.com

For Screens, Crushers, Shredders & Conveyors

Page 46 • June 30, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Roto-Screen 454 Portable Trommel Screen

Barford TR8048M Track Stacker w/ Mulch Auger

Barford R6536TS Track Radial Stacker

LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

2021 Barford 750J Compact Jaw Crusher

www.bobcatofstl.com

Bobcat of Clarksville 960 Alfred Thun Road • Clarksville, TN 37040 931-436-9555 Revolver RT508 Compact Portable Trommel

Turn Your Waste Into Profit Sand Science Can Show You How Cell: (843) 410-8334 sales@sandscience.com Barford S104 Track Incline Screener

149 Industrial Blvd • La Vergne, TN 37086 615-941-4000

LARGE & SMALL EQUIPMENT DEALERS

www.SandScience.com Barford SR124 Portable Track Scalping Screener

Bobcat of Nashville

Kafka Stacking Conveyor – 100’ x 36”

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers, Brush Chippers, Stump Grinders, Skid Steer Attachments) Kafka Hopper/Feeder – Various Sizes Available

TraxPlus

www.traxplus.com

9800 Hwy 503 • Hickory, MS 39332 601-635-5543

Caterpillar Material Handlers’ New Cab Enhancements Offer Safer Operation CATERPILLAR from page 44

and the machine automatically recalls the settings based on the ID. Improving highwall trailer loading/unloading and shredder loading efficiency, the hydraulically controlled cab rises to a maximum elevation of 19-ft. 9-in. Safety in Mind Smaller cab pillars, combined with large tempered windows and a flat engine hood, deliver enhanced allaround visibility for the operator, increasing safety. With video feed displayed on the large touchscreen monitor, standard rearview and sideview cameras improve work area visibility. The cab design includes thick, impactresistant safety laminated windshields that meet P5A standards, while operators are protected from falling and flying debris by the standard Falling Object Guard System (FOGS). An upper-level service platform with access steps constructed of antiskid punch plate provides easy, safe and quick access to machine service items.

In the event of a hydraulic service interruption, the cab can be safely lowered via one of two emergency cab lowering valves, located inside the cab as well as outside of the machine. Check valves on the boom and stick prevent reverse hydraulic oil flow, to maintain the position of the front linkage should the hydraulic system experience an unexpected loss in pressure. Service Simplified Synchronized service intervals and extended filter replacement schedules reduce maintenance time and costs for the new Cat MH3250 and MH3260 material handlers. All fuel filters feature a coordinated 1,000-operatinghour change interval, and the new air intake filter with precleaner lasts up to 1,000 hours to reduce maintenance requirements. A new hydraulic oil filter improves filtration and increases change intervals to 3,000 operating hours, a 50 percent longer service life than previous filter designs. New anti-drain valves keep the hydraulic oil clean during filter

replacement to improve system longevity. Operators conveniently track filter life and maintenance intervals on the in-cab high-resolution monitor. Eliminating the need for operator interaction, the high-efficiency cooling fan features an automatic reverse function to keep the cores clean, maximizing machine uptime. Conveniently located Cat S·O·S ports allow for quick fluid sample extraction for analysis, simplifying maintenance. New remote services capabilities for the MH3250 and MH3260 increase service efficiency and potentially save trips to the job site. Remote Flash works around the production schedule to conveniently assure the machine operates with the most current version of on-board software, so it delivers high performance with minimum downtime. The Cat App conveniently helps to manage fleet location, hours and maintenance schedules and provides alerts for required maintenance needs. 

2891 S. Frontage Road • Columbus, MS 39701 662-368-3300 5122 Highway 98 • Summit, MS 39666 601-600-7202

www.companywrench.com

Company Wrench 3729 N. Frontage Road • Lakeland, FL 33810 866-294-6103

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 30, 2021 • Page 47

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

THE BEAST 2460XP Trrack Horizontal Grinder

Mason Tractor Company www.masontractor.com 5038 Buford Hwy. Norcross, GA 30071 770-582-0377 Blue Ridge, GA 706-632-3777 Cumming, GA 770-887-6119 McDonough, GA 770-957-3370 Villa Rica, GA 678-952-2037

MODEL B M BT BTC-300 Trrack Carri rie ier

M MODEL 3590XL W Whole Trree Chipper pp

www.bobcatops.com

Bobcat of Charleston

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

North Charleston 843-725-6330

Bobcat of Columbia Columbia 803-933-9996

Bobcat of Greenville Piedmont 864-269-3600

Bobcat of Spartanburg 677500 Millbrook Rd. • Remus, MI M 49340 • 1-800-952-0178 FIN FIND ND US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

Spartanburg 864-342-9003 MODEL SG-75 Trrackk Stump S p Grinder Gi d

Bobcat of Savannah Bloomingdale 912-236-5588

Page 48 • June 30, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Power Meets Portability in McCloskey’s Minimizing Risk… New I4C Compact Impact Crusher Metso Outotec Extends Mill Reline Equipment Offering With New MRM

The 44-in. impact crusher has been designed with a deeper chamber, creating greater tramp release space. With an aggressive blow bar and apron design, four-bar variable speed rotor and three crush zones with an optional fourth strike, the I4C can be set up as a primary or secondary crusher in some of the toughest materials.

McCloskey International has unveiled the I4C, the latest entry into McCloskey’s impact crusher line. In a class of its own, it brings the power and productivity of an 44.3 in. (112.5 cm) impactor to a compact footprint for maximum maneuverability. Taking the original impact crusher design and transforming it into a heavy duty compact product that is even more flexible and productive, the new mobile crushers maximize the efficiency of any project site, according to the manufacturer. Built to the same high standards as full-size crushers, the new I4C delivers additional convenience and choice to suit every customer’s needs. McCloskey engineers have adapted the design to meet the evolving requirements of today’s projects and operations by developing more compact products while maintaining the same high standard of McCloskey durability, reliability and quality. The I4C compact impact crushers have a number of features that enhance their operation. The 44 in. impact crusher has been designed with a deeper chamber, creating greater tramp release space. With an aggressive blow bar and apron design, four-bar variable speed rotor and three crush zones with an optional fourth strike, the I4C can be set up as a primary or secondary crusher in some of the toughest materials. A new asymmetric feeder reduces bridging that can occur in some applications and, combined with the single unit feeder-hopper construction, delivers better motion and vibration for the material as it moves into the impact chamber. Maximum efficiency of material flow is delivered end-toend with the I4C — from the feeder to the new curved belt on the main conveyor that better manages material delivered to its 4m high stockpile. With quick release and ground level access, the conveyor belt also is easy to maintain and service. As with all McCloskey equipment, safety is paramount,

and the I4C is equipped with a number of features to ensure the workplace and the operator are secure. A chamber door safety sensor, built in safety shutdown functions, chamber safety arm and an innovative platform for changing blow bars all contribute to the safe operation and maintenance of the equipment. Simplicity is key, with ease-of-use and safety considerations built into the low voltage electrical system, hydraulics and control panel. Higher engine power delivers cost efficiency by delivering maximum production levels and is, size-for-size, McCloskey’s most powerful impact crusher, according to the manufacturer. “Listening to our customers is a core element of our design engineering across all product lines. We are bringing to the I4C to market to respond to the demand for a heavy duty, high production impact crusher with high mobility and enriched safety features. The I4C is an exciting entrant to the category, and we look forward to working with our global dealer network to fulfill the demand for these products,” said Toni Laaksonen, senior vice president, McCloskey International. For maintenance ease the vast majority of components are identical between models to simplify spare parts. Ground level access allows for quick service and maintenance, reducing the downtime for the operation. These compact, mobile crushers are suited particularly to construction and demolition recycling, asphalt recycling and aggregates. The new impactors deliver high performance and expanded versatility in a highly mobile lineup to customers around the world. With their fast set-up time and ability to nimbly move around in tight spaces, the crusher’s small footprint is uniquely suited to heavy duty applications where mobility and high production are key. For more information, visit www.mccloskey international.com. 

The new robust MRM has a capacity of 4,000 kg, enabling easy and safe replacement of steel lining systems inside even the largest grinding mills, according to the manufacturer.

Metso Outotec is extending its mill reline equipment offering with a high-capacity mill reline machine (MRM). The new robust MRM has a capacity of 4,000 kg, enabling easy and safe replacement of steel lining systems inside even the largest grinding mills, according to the manufacturer. “Replacing steel lining systems inside the confined space of grinding mills is a time-consuming and demanding job requiring strict safety measures and highly reliable equipment. With the addition of the high-capacity MRM, Metso Outotec now provides a comprehensive range of mill reline machines designed to ISO and IEC standards. The new MRM is designed for heavy-duty lining replacement tasks, with safety and efficiency as our top priorities,” said Jared Le Cras, senior manager, mill reline equipment at Metso Outotec. Benefits of Metso Outotec Mill Reline Machine • Efficient mill relining enabled by unique mechanical design features • Maximized reliability, due to easy data access and spares replacement • Minimized risk, due to safety features • Comprehensive service support via Metso Outotec’s global service network In addition to mill reline machines, Metso Outotec’s mill reline equipment offering includes feed chute transporters, Tube MRMs and bolt hammers. For more information, visit www.mogroup.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 30, 2021 • Page 49

Continuing Education is FREE!! Adjoining the 100,000 sq. ft. US headquarters just outside Charlotte, North Carolina, is the home of the SENNEBOGEN Training Center.

PURP POSE-BUIILT

FROM THE T GROUND D UP

Here, service tech hnicians, parts personnel and machine operatorss receive expert hands-on and classroom training absolutely free.

The two service level courses are designed to build on each other. Ou ur trainers p provide instruction on proper mainten nance procedures and system troubleshooting. The operator familiarization course was created d to help operators maximize the machine’s cap pabilities using best practices GPS FƌDJFODZ BOE E TBGFUZ 5IF QBSUT USBJOJOH course teaches parts counter teams how to better understand d the parts manuals for their SENNEBOGEN matterial handlers. According to SEN NNEBOGEN, there is no fee for course atten ndance or course material GPS 4&//&#0(&/ / EFBMFST TUBƋ BOE UIFJS customers. “Our objective is to create North America’s best-trrained service network and provide our custom mers with increased machine availability”, said Constantino C Lannes, President of SENNEBOGEN LLLC.

Available T Trainin ng Courses • Serrvic vice Level 1 • Serrvic vice Level 2

See how SENNEBOGEN can purpose-build the right machine m for you

• Parts Training • Operator Familiarization

www.sennebogen s sennebogen -na com | +1-7044-347-4910 -na.c

TRACTOR & EQUIPMENT COMPANY Alabaster, AL 205-621-2489 Anniston, AL 256-831-2440 Birmingham, AL 205-591-2131 Decatur, AL 256-355-0305 Dothan, AL 334-678-1832 Huntsville, AL 256-851-2222 Mobile, AL 251-457-8991

Montgomery, AL 334-288-6580 Tuscaloosa, AL 205-752-0621 Panama City, FL 850-763-4654 Pensacola, FL 850-505-0550 Albany, GA 229-435-0982 Atlanta, GA 404-366-0693 Augusta, GA 706-798-7777 www.tec1943.com

Calhoun, GA 706-879-6200 Columbus, GA 706-562-1801 Hoschton, GA 706-654-9850 Kennesaw, GA 678-354-5533 Macon, GA 478-745-6891 Savannah, GA 912-330-7500

POWER EQUIPMENT COMPANY Knoxville, TN 865/577-5563 LaVergne, TN 615/213-0900 Chattanooga, TN 423/894-1870 Kingsport, TN 423-349-6111 Memphis, TN 901-346-9800 Saltillo, MS 662-869-0283 www.powerequipco.com

GSE GREAT SOUTHERN EQUIPMENT COMPANY Tampa, FL 866-586-8956 Pompano Beach, FL 954-327-8808 Fort Myers, FL 239-334-6063 Tallahassee, FL 850-574-0892 Jacksonville, FL 904-268-4400 Orlando, FL 407-859-9160 www.gsequipment.net

Page 50 • June 30, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Sandvik Mobile Crushing, Screening Celebrates MyFleet 1,000th Unit Milestone

Metso Outotec and AM King, a leading marketplace for surplus mining and processing equipment globally, have entered into a global partnership agreement covering spares, wears, repairs and field service recommendations for AM King brokered mill and crusher sales, irrespective of the OEM.

Marty Waldorf (L), sales representative, and Dan Soley, executive VP sales and marketing, at Miller-Bradford & Risberg Inc.

Purpose designed to help customers get the very best out of their investment, Sandvik Mobile Crushing and Screening is now offering its premium data subscription on new equipment and retrofit packages complimentary for seven years. This marks the celebration of the 1,000th mobile unit to leave the factory with My Fleet connected. Digitalization has never been more important than it is in today’s climate and it has positively changed the way of working for many people over recent months. Sandvik Mobile crushing and screening have invested heavily into its online distributor portal and My Fleet telematics systems over the past two years. Every new machine within the Qand U-440i range of mobile crushers and screens is equipped with a My Fleet telematics device and fully connected the moment it leaves the factory. “It’s an exciting time to hit this major milestone of 1,000 units now connected to My Fleet,” said Jesper Persson, vice president life cycle services. “We are proud of the progress we have made in digitalization and automation, and how the technology supports our customers. This investment will enable them to learn more about their operation and how best to improve it by tracking their fleet and the health of it. Alerts and notifications will proactively help to resolve issues before they become critical, while also enabling remote support wherever possible, saving on time, cost and thereby generating the desired uptime in a sustainable way.” U.S. Distributor Miller-Bradford Take Delivery The unit delivered is a Sandvik QI442 impact crusher and the customer to take ownership in February is the U.S. Distributor in Wisconsin, Miller-Bradford & Risberg Inc. Dan Soley, executive VP sales and marketing said, “We are delighted to hear the news that our QI442 is the 1,000th unit. My Fleet is a really beneficial tool as it gives great

insight into machine utilization and location. The ability to offer remote support means we don’t always need to visit the customer to assist them in their operations.” Customers will be able to benefit from enhanced levels of technical support. Whether through Sandvik, or from trained distributor network, technical support specialists will be able to view the same operational data and view notifications of any alerts or machine faults via the system, and thereby be able to offer remote support without necessarily needing to be on site. This immediate assistance increases uptime, while at the same time providing a safer working operation as the operator doesn’t need to physically climb on the machine, as well as supporting the drive to a more sustainable business, according to Sandvik. Customer benefits include: • Remote access to your fleet 24/7 via a mobile device or PC • Optimize performance through monitoring of operational data • Maximize uptime through planned service and preventative maintenance • Quick and efficient support through remote visibility of machine • Safe and sustainable operation with reduced need to dispatch an engineer to site • Peace of mind through enhanced security with geofencing All Sandvik machines that are already fitted with My Fleet and working out in the field will automatically be granted the extended seven-year data subscription. This includes customers who have purchased the My Fleet retrofit kit. The retrofit kit can be fitted to all Sandvik 1 Series models onwards. For more information, visit www.rocktechnology. sandvik. 

Metso Outotec, AM King Enter Global Partnership Deal Metso Outotec and AM King, a leading marketplace for surplus mining and processing equipment globally, have entered into a global partnership agreement covering spares, wears, repairs and field service recommendations for AM King brokered mill and crusher sales, irrespective of the OEM. Metso Outotec will provide competitive aftermarket solutions for optimized performance, higher reliability and increased profitability, covering solution packages on certified inspections and warranty, maintenance services and optimization services. “We are very excited to partner with AM King. Through our comprehensive service portfolio, customers can maximize the performance of used or un-used surplus equipment. Metso Outotec’s extensive aftermarket offering combined with our unique field service expertise bring many sustainable options to expand the equipment life cycle. “This is a concrete action to contribute to circular economy targets which are increasingly important for all companies,” said Sami Takaluoma, president, services business area at Metso Outotec. Metso Outotec has an extensive footprint of more than 3,000 field service professionals and additional support resources close to customer operations. Today, Metso Outotec has 140 service centers around the world. “Partnering with Metso Outotec will further enhance the promise we make to all customers interested in surplus assets by providing a faster time to production, lower capital costs and a more sustainable future for the mining industry,” said Albert King, a member of the management team at AMK. For more information about AM King, visit amking.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 30, 2021 • Page 51

Yo Y our Florida dealer for Metso Outotec crushing g and screening g equipment As your Metso Outotec dealer in Florida, Kelly Tractor provides premium quality equipment to ensure high quality end products. We carr y the complete line of Metso Outotec crushing and screening solutions, ranging from mobile conveyors, crushers and crushing plants to feeders, screens, OEM parts and more. Ť construction solution for you.

metso.com/aggr /aggreg egates

Miami, FLL | kellytractorr..com (305) 59 922-5360

FAE PT LINE: GET USED TO BEST IN CLASS

(770) 407-2014 - info@faeusa.com

fae-group.com

Page 52 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 22-B Dragline, 1:50 scale - $290

Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160

Caterpillar D6H Track-Type Tractor, 1:50 scale - $150

Allis Chalmers TS300 Cable operated Motor Scraper, 1:50 scale - $110

Caterpillar 245 Hydraulic Shovel, 1:50 scale - $80

Caterpillar D8R,Series II Track-Type Tractor, 1:50 scale - $75

Cedarapids Grayhound Track Paver, 1:50 scale - $75

Caterpillar 627 Motor Scraper, 1:50 scale - $75

JCB 217S Backhoe/Loader, 1:50 scale - $75

Caterpillar 245 Excavator, 1:50 scale - $75

Case 20C Wheel Loader, 1:35 scale - $75

Caterpillar AP600D Asphalt Paver, 1:50 scale - $65

Caterpillar 825B Landfill Compactor, 1:50 scale - $50

Caterpillar D350D Articulated Dump Truck, 1:50 scale - $50

Caterpillar 226B 2 Skid Steer Loader, 1:32 scale - $50

Komatsu D355A Dozer w/Ripper, 1:50 scale - $75

Shipping and Handling Included

Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

610-506-5961 Email – bmckeon9@gmail.com

Trucks & Trailers

SECTION

Pages 53-56

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

New Warranty Policy, Financing Program Gives XL Specialized Industry Edge XL Specialized’s 120 lowprofile HDG trailer.

Standing behind its versatile many others for the construction, commercial, agricultural, heavy haul products and custom wind energy, oil and gas, infrastructure and custom trailer trailer innovations, Iowa-based markets. manufacturer XL Specialized Trailers started 2021 on a high Founded in 1995 by George Wall, the company has been note with a new warranty policy and new financing program, in business for 26 years, during which it has steadily grown both improvements over its own offerings and setting the from its original facility in Oelwein to its current headquarstandards high for the industry overall. ters in Manchester, expanding from 75,000 sq. ft. in 2006 to President and CEO Stuart Sleper is upbeat on these latest 130,000 sq. ft. of manufacturing space today, and with developments of 2021. another expansion project now adding another 50,000 sq. ft. “In the last three years, our product quality has improved This will bring XL to almost 200,000 sq. ft. of manufacturdramatically,” he said. “We know this because our warranty ing space and updated offices. expense is a fraction of what it used to be, so we felt comTo be completed by year-end, the expansion will help add fortable coming out with a brand-new warranty program that capacity in key areas of XL’s manufacturing process to covers our trailers for an extended time period.” reduce lead times and see a more satisfied customer base, The new 5-3-1 warranty policy features full five-year resulting in larger market share. structural coverage, full three-year paint coverage and full “The last three years we’ve seen record performance one-year coverage on parts and components. The new XL Specialized Capital financing program for trailer buyers is a solution for XL’s nationwide network of dealers to get trailers to customers quickly and affordably, with online credit approvals completed within hours and flexible payment plans. “The financing program is another tool for our dealerships to help an end user that has trouble coming up with the full amount to spread those payments and make that purchase much more feasible,” said Sleper. XL offers a wide range of trailer models including hydraulic detachable gooseneck (HDGs) and mechanical full-width gooseXL Specialized’s mini-deck trailer. neck (MFGs) lowboys, extendables and By Ruksana Hussain CEG CORRESPONDENT

across the board, from safety to topline growth to customer satisfaction … With the expansion project, we are looking to add more people, and grow by another 30 percent,” said Sleper, who brings manufacturing expertise spanning more than 25 years, having held leadership roles with General Motors, Honeywell, Goodyear Tire and Parker Hannifin. That growth is attributed in large part to XL’s workforce and new leadership team, with company culture being the driving force behind the improvement. “Our employee turnover three years ago was 85 percent and today is below 20 percent, that’s a business metric we watch closely,” said Sleper. “It’s very important to be plugged in to our team members. If we take care of our team, they in turn, will take good care of our customers. It’s been a transformational change for XL.” Where finding and retaining labor has been a major pain point for the industry, and was true for XL until 2018, an improved employee benefits package with a bonus tied to company earnings, created by the new leadership team, has seen XL realize its goal of becoming an employer of choice in northeast Iowa. “We have an awesome team at XL, and they deserve all the credit for our recent success,” said Sleper. While competitors offer a standardized product line, and so does XL, Sleper explained that customization always drew customers in. A highly engineered, customercentric, process-oriented approach, customization at XL involves voice of the cussee XL page 56

Page 54 • June 30, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 @V\ RUV^ ^OH[ `V\ ULLK [V OH\S -LSSPUN OHZ [OL [YHPSLY [V NL[ P[ [OLYL >P[O V]LY `LHYZ JVTIPULK PUK\Z[Y` ZHSLZ L_WLYPLUJL ^L OH]L [OL HUZ^LYZ [V `V\Y ZWLJPHSPaLK [YHPSLY ULLKZ

5,> 46+,3 7*+

-; 7*+ 7VSL *HYNV +\TW

)LQG 8V DW %RRWK

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

Richmond Machinery 1701 Roseneath Road Richmond, VA 23230 804-359-4048 www.richmondmachinery.com

Fat Truck Amphibious Vehicle Revolutionizes Power Line Work Zeal Motor Inc. announced the official launch of its new high speed capstan drive mounted on the Fat Truck. The high-speed capstan drive integrated on the back of an amphibious vehicle redefines the safety standards and the productivity level when working in harsh terrain on powerlines, according to the manufacturer. High-speed capstan drives are usually mounted on much larger equipment. Before today, it was not possible to work efficiently with a high-speed capstan drive with smaller and more affordable equipment. The integrated solution mounted on the back of a Fat Truck answers the market’s need of working in safer conditions and being more productive in harsh terrains, the manufacturer said. “By diverting the high flow hydraulic of the Fat Truck we were able to achieve a significant gain of productivity and improve the lifting capacity to install / change insulators, transformers or any other lifting requirements at the pole,” said Amine Khimjee, vice president of sales and marketing at Zeal Motor Inc. The Fat Truck integrated solution with the high-speed capstan drive offers a lifting “This new option is totally integrated on capacity of up to 1,900 lb., a maximum speed of up to 300 ft./minutes and can han- the vehicle and was designed with the dle angles from minus 30 degree to 45 degrees. expertise of the linemen. The utilities now

have the capacity of the larger equipment, the lower cost of operation and mobility of the smaller ATV’s. “This integrated option on the Fat Truck will give the opportunity to work where conventional equipment usually get stuck. We are talking about major cost savings on operations and on vehicle transportations.” The synergy of having the utility companies involved in the project was key to have the right tool at the right moment for the right job. The Fat Truck integrated solution with the high-speed capstan drive offers a lifting capacity of up to 1,900 lb., a maximum speed of up to 300 ft./minutes and can handle angles from minus 30 degree to 45 degrees. “We are dedicated to provide the optimal tool vehicle by listening to our customers and developing the best solutions for the utilities,” said Maxim O’Shaughnessy, president of Zeal Motor Inc.” Zeal Motor, based in Bromont, Quebec, Canada, manufactures industrial utility vehicles that provide solutions to companies working in infrastructure such as powerlines, pipelines, mining exploration and first responder vehicles. For more information, visit www.FATTRUCK.com. 

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • June 30, 2021 • Page 55

What can you haul in a side dump trailer? Nearly anything.

Superior Stability

Faster Cycle Times

Easier Unloading

With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com

Page 56 • June 30, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

NOT A ALL TRAILERS ARE BUIL B T THE E SAME SOME ARE E STRONGER TH HAN OTHERS

COMPANY WRENCH www.companywrench.com

2XU WUDLOHUV VWDUW RXW WRXJK DQG VWD\ WRXJK VR WKH\ FDQ VDIHO\ KDXO \RXU HTXLSPHQW GD\ DIIWWHU GD\\ \HDU DIIWWHU \HDUU

3729 N. Frontage Road Lakeland, FL 33810 866-294-6103 11301 Reames Road Charlotte, NC 28269 980-859-4680 125 Wilsons Mills Rd. Extension Smithfield (Raleigh), NC 27577 919-938-8145

Learn more: towmaster towmaster.com/more .com/more

141 Brickyard Rd. Lexington (Columbia), SC 29072 803-520-0032 6325 Central Avenue Pike Knoxville, TN 37912 865-766-2571

'URS 'HFN

RING POWER CORP. www.ringpower.com

7LOW 'HFN

/RZER\

+\GUDXOLF 7DLO

AMERICA A’S A ’S BEST BUIL LT T TR TRAILERS RAILERS FOR PRO OFESSIONAL HA AULERS

MOR RE MODELS • MORE OPTIONS ONS • MORE CHOICES

Call 800-462-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH

500 World Commerce Parkway St. Augustine, FL 32092 904-494-7631

Lake City 386-755-3997

Sarasota 941-359-6050

Lakeland 863-606-0512

Tallahassee 850-514-1958

Brooksville 352-797-9500

Ocala 352-620-0660

Tampa 813-671-3200

Daytona Beach 386-947-4939

Orlando 407-856-4851

Jacksonville 904-714-3517

Palm Bay 321-725-6420

YANCEY BROS. CO. www.yanceybros.com 330 Lee Industrial Blvd. Austell, GA 30168 800-282-1562

Albany 800-768-2892

Calhoun 800-752-9804

Dacula 800-545-2945

Macon 800-633-5180

Savannah 800-755-8382

Valdosta 800-755-6841

Augusta 800-446-5131

Columbus 800-633-5240

Kennesaw 844-962-7368

McDonough 855-901-0100

Statesboro 888-764-6506

Washington 888-678-3211

Waycross 888-948-2443

XL Specialized Continues to Seek ‘Next Big Thing’ in Trailers XL from page 53

tomer, market study, a lot of analytics and a 10-person leadership team that sits on the panel evaluating new products as they come through. A prototype unit is made and goes into the field for testing. “We have a large engineering team; they are experts regarding all the different factors and variations that go into heavy haul trailer manufacturing,” said Sleper. “Every state has different regulations and laws governing transportation of loads over the highway, so our engineering team must be up to date and knowledgeable about all those state laws and regulations, different bridge laws for example, and all the requirements that go into a heavy haul. It’s that engineering expertise that our founder, George Wall, realized was needed and he built the company around it. The differentiator back then and today being customized engineering services and products, that’s our secret sauce. That’s what sets us apart.” Wall sold the company in 2007 to a private equity group, that then sold the company in 2016 to London-based Caparo Bull Moose, an industrial conglomerate owning manufacturing companies around the world. Through it all, XL has continued to strengthen its dealer network, team of skilled employees and add to its product offerings. Training is provided twice a year where dealers, customers, suppliers and new employees are invited to learn more about the company and products. The two-day sessions include hands-on time with trailers, understanding how each different model works and performs. XL has a complete parts department that handles incom-

ing calls daily and their own parts warehouse. Trailers get serviced at XL’s dedicated service center housed in a separate building across the street from the main facility with its own expert staff. “The biggest challenge for us now is trying to meet the demand of our customer base; it has exploded over the last four months so the timing of the expansion project has been good for us and will enable us to better meet that demand,” said Sleper. “The other challenge is the supply chain; there is unprecedented raw material inflation going on in the market right now. We’re doing the best we can managing through this commodity surge. Our customers and dealers have been excellent partners through this challenging environment, and

we’d like to thank them for their support.” On plans for 2021 and beyond, Sleper said, “Every market sector is unique and involves product development and new features to trailers. Because most of our orders are custom work, each trailer is almost like a new product. We have a new product development team that is working all the time with our customers to develop the next big thing in the trailer industry. We are number one in the innovation space, and we come out with three to five new trailers every year. Our company is growing fast, and we have ambitions to double in size in the next three to five years. We are very excited for the future and what’s in store for the heavy haul trailer industry.”  CEG XL Specialized’s HDE (hydraulic detachable extendable) trailer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 57

Labor Shortages Could Bedevil New Infrastructure Plan LABOR from page 1

In a labor report, the Associated General Contractors (AGC) noted that BLS statistics put worker numbers at 225,000 below the pre-pandemic peak of February 2020. Nonresidential construction employment shrank by 21,800 in May and was 260,000 below the February 2020 level, reported AGC chief economist Ken Simonson. “A total of 642,000 former construction workers were unemployed in May, a sharp decline from May 2020 but the second-highest May level since 2014,” he wrote. The industry’s unemployment rate in May was 6.7 percent, compared to 12.7 percent in May 2020. For total construction, hourly earnings in April averaged $32.59, 8 percent more than the average for the nonfarm private sector. But over the past two years this premium shrank by 2.2 percentage points from 10.2 percent in April 2019. This implies that “the financial attractiveness of construction may be diminishing as other sectors that are expanding faster raise pay to attract more workers,” said Simonson. The premium diminished the most for employees of heavy and civil engineering construction firms (minus 4.5 points, from 16 percent above the private-sector average in April 2019 to 11.5 percent in April 2021). Residential building firms (from an 8.8 percent premium to 6 percent), specialty trade contractors (6.1 percent to 5 percent), and nonresidential building firms (25.4 percent to 24.5 percent) followed. Citing BLS data, the AGC reported there were 357,000 job openings in construction, seasonally adjusted, at the end of April. Hires in April totaled 335,000 or 4.5 of the employment total for the month. “Apart from the pandemic-depressed 3.1 percent rate in 2020, the rate was the lowest for April in the 21-year history of the series,” said Simonson. The job openings rate (4.6 percent) was the second-highest total for any month since the series began in December 2000, he added. Recruiting Headaches Recruiting construction workers can be more expensive than keeping them on the job. “Many young employees know little about the industry,” said Blair Chenault, CEO of construction software provider Flashtract. In a blog on his company’s website, Chenault wrote that long-term workers have been the backbone of the industry. “As these workers reach retirement age in droves, younger workers aren’t stepping in to fill the available positions.” Younger workers believe the construction industry is unstable, he said.

Another big reason: The encouragement to seek higher education equals discouragement from manual jobs like construction. Plus, construction comes with safety hazards that make proper training a vital part of the industry, he wrote. “Training long-term employees is well worth the cost and time, but new employees can be unpredictable,” said Chenault. “Losing trained employees is expensive and leaves fellow workers carrying an extra burden on the job site.” Presidential Pains The White House’s plan to alleviate supply-chain disruptions could create other burdens. While boosting labor numbers and training, the proposal would increase the cost of doing construction business, believes the AGC. Association officials want the Biden administration to address rising materials costs and growing labor shortages. Stephen E. Sandherr, the association’s CEO, said Biden’s supplychain program “would limit the ability of workers and employers to fill needed construction positions.” He believes that imposing mandated hiring percentages, inflexible labor agreements and artificially high pay rates will cut the number of firms and workers available for infrastructure and other construction programs. “The construction industry is experiencing widespread and growing problems with the cost and supply of materials,” said Sandherr. “These challenges will make it more costly and difficult to achieve the administration’s goals for infrastructure, renewable energy and affordable housing.” The president could provide immediate relief from soaring lumber, steel and aluminum prices by removing tariffs and quotas, he said. “Unfortunately, the president’s recommendations ignore that quick and effective approach,” Sandherr said. AGC also wants an end to unemployment insurance supplements they believe are encouraging qualified workers to stay off the job. “Washington’s tariffs are making materials more expensive while its unemployment supplements are making workers more hesitant to return to payrolls,” said Sandherr. And national nonprofit newsroom The Hechinger Report noted that Biden’s ambitious infrastructure plan runs up against a potential construction labor shortage. It attributes the shortage to “a years-long failure to train the kinds of workers needed to do it.”

Biden’s plan would beef up U.S. highways, bridges, water facilities, power plants and the country’s electrical grid. The industry’s ongoing struggle with labor shortages will make it tough to catch up to the demand created by the national infrastructure push. One, it takes months, and sometimes years, to train a trades worker to be proficient at his or her profession. Two, the “silver tsunami” of retirees among the construction labor pool has the industry worried about filling jobs. The Brookings Institution estimates about 10 percent, or about 1.5 million people, will

leave their infrastructure jobs every year over the next decade, noted Hechinger. In the Classroom Staffing shortfalls differ among industries. Those sectors growing the fastest are likely to have the most difficulties, according to the article. Geographically, some regions will suffer more severe labor shortages than others. Hechinger noted that Omaha, Neb., companies can’t find enough plumbers, electricians and mechanics, and the region’s colleges can’t keep up with the demand for skilled trades workers. Traditionally, community colleges have braced the nation’s workforce and more than 40 percent of undergraduate students, are enrolled in them. Many have chosen vocational fields responsible for keeping the country’s infrastructure running. “But those colleges are chronically underfunded and often unable to match privatesector salaries or train students using modern technology,” noted the Hechinger article. “These challenges have been compounded by huge enrollment declines during the pandemic.” But the biggest challenge is affording qualified instructors and cutting-edge equipment.

Solutions to Stay Afloat Baywork, a San Francisco area coalition of water agencies, has created apprenticeship programs to get students that experience while they’re in school, reported Hechinger. “Utility managers believe this approach will solve some staffing problems.” Some agencies in the area have agreed to hold community college classes at their plants. It cuts down on students’ commute times and provides practical experience. Oakland’s Dublin San Ramon Services District is offering plant tours and job fairs to boost interest in water jobs. “We have to market these jobs and make sure high-school kids who are smart consider it,” said Levi Fuller, district wastewater operations superintendent. Gender and diversity, as well, plague construction sectors. Brookings found that more than 82 percent of power plant workers are white. And, 82 percent of infrastructure workers are men. “A more diverse workforce would help fill jobs, but it will take broader steps to complete the slew of infrastructure projects proposed by the administration,” wrote Hechinger. A “few relatively easy fixes” the article lists include allowing Pell grants to pay for short-term college vocational programs. Investing in childcare to help older students get the training they need to change jobs is also on the list. Finally, as basic as it sounds, computer skills would dramatically change the industry, believes the National Skills Coalition. Katie Spiker, director of government affairs, said some 48 million Americans don’t have these skills and will be unable to operate software or machinery at a job site. “If you don’t have the ability to log on to a computer, then it just takes that much more training,” Spiker told Hechinger. “The United States has not invested in the kind of support that allows workers to access those skills.” Recruiting Tips Chenault of Flashtract warns that all industries will vie for the attention of transitioning job seekers. Companies in the construction industry will need new techniques for recruiting and retaining. Here are his tips: • Expand recruitment tactics and meet potential employees where their job search exists. “As people return to the job market, they may not even consider construction without see LABOR page 64

Page 58 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Florida Coast Equipment to Purchase Two Turf & Tractor Kubota Dealerships

BROOKS SALES, INC. www.brookssales.com 3144 Hwy 74 East • Monroe, NC 28112 704-233-4242

CREEL TRACTOR CO. www.creeltractor.com

Despite national labor and inventory shortages caused by the COVID-19 pandemic, Florida Coast Equipment, a family-owned and operated full service Kubota dealership, will add 35 high paying jobs in just the first 12 months as part of its expansion deal to purchase two Gulf Coast Turf & Tractor Kubota dealerships. The move brings Gulf Coast Turf & Tractor dealerships in Land O’Lakes and Plant City to the Florida Coast family, making Florida Coast Equipment the largest Kubota dealership in the southeast region and one of the top five largest

Kubota dealerships in the nation. Florida Coast Equipment President Todd Bachman noted that while the business is growing, it would remain committed to its family-focused, community driven approach that has made the company Florida’s premier Kubota dealership. “We are excited to grow and bring new jobs to the great state of Florida,” said Bachman. “But no matter how much we grow, it’s our tradition of delivering impeccable customer service and unrivaled product support that makes us who we are and that will never change.” Florida Coast Equipment said that it would be hiring new drivers, technicians, sales positions and other high paying positions as well as contracting major facility improvements as part of the expansion. Founded in 1985, Florida Coast Equipment has grown from a single dealership with two employees to locations in West Palm Beach, Naples, Mims and Fort Pierce. This announcement will bring the total to six locations by adding Land O’Lakes and Plant City. 

Panther Lineup…

3771 Palm Beach Blvd. • Fort Myers, FL 33916 239-694-2185 • Fax: 239-694-6059

CROSBY EQUIPMENT COMPANY, INC. www.crosbyequipimentco.com 1826 South Peterson Ave. • Douglas, GA 31535 915-384-4664

RJV KUBOTA www.rjvequipment.com Nashville 140 Charter Place • LaVergne, TN 37086 615-793-7576 Knoxville 3356 Rudy Street • Knoxville, TN 37921 865-970-2840

LINDER TURF & TRACTOR www.lindertt.com 250 North Church Street • Burlington, NC 27212 336-792-3412 1501 N. Memorial Drive • Greenville, NC 27834 252-695-6200 5504 15th Street E • Bradenton, FL 34203 941-755-5722

GROWERS EQUIPMENT CO. www.growersequipment.com 2695 Davie Road • Davie, FL 33314 954-916-1020

McClung-Logan to Represent Prinoth Tracked Vehicles in Maryland, Virginia

4801 NW 77th Avenue • Miami, FL 33166 305-592-7890

MASON TRACTOR COMPANY www.masontractor.com 1050 Appalachian Hwy • Blue Ridge, GA 30513 706-632-3777 2510 Dahlonega Hwy • Cumming, GA 30040 770-887-6119 395 Industrial Blvd. • McDonough, GA 30253 770-957-3370 5038 Buford Hwy. • Norcross, GA 30071 770-582-0377 1275 Carrollton Villa Rica Hwy. • Villa Rica, GA 30180 678-952-2037

RICHARDS TRACTOR AND IMPLEMENTS www.ritrac.com

Prinoth, a manufacturer of tracked vehicles, has introduced McClungLogan of Maryland as its representative of the Panther lineup for the states of Maryland and Virginia. What Prinoth and McClung-Logan have in common is the desire to provide customers with top quality construction equipment, exceptional service and the best solutions to maximize productivity, according to the companies. After 80 years in business, McClung-Logan’s mission is to devel-

op true and transparent partnerships with its clients and support them beyond their expectations in every way. Its fleet of heavy construction equipment is made up of safe, reliable and versatile products from wellknown and trusted manufacturing companies. With a diversified range of construction equipment vehicles, it offers machines built for any job site application. With the addition of the Prinoth Panther T7R and T14R vehicles, it has solidified its position within the

dumper market with products perfect in many projects, including those of restoration near water, the company said. McClung-Logan has been selling and renting construction equipment in its region since 1939 and currently is operating 10 full-service locations throughout Maryland and Virginia. It offers expertise in equipment sales, parts, rentals and services, which has put it among the top leaders of the distribution network of heavy construction equipment in its region. 

1995 N.E. 8th St. • Homestead, FL 33033 305-247-8711

COASTAL MACHINERY COMPANY www.coastalmachinery.com 6701 Mobile Highway • Pensacola, FL 32526 850-944-2002 • 800-476-1130

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 59

Page 60 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Magnolia Thinks Outside the Box With Its Dredge ‘Toolbox’ MAGNOLIA from page 8

provide. As of today, Magnolia’s fleet includes three Barracuda class dredges; one 8-in. Moray class dredge; 10and 18-in. Shark class dredges; one 16-in. Marlin class dredge; a number of booster pumps and a workboat, which are all transportable allowing the company to service customers throughout the United States. In addition, DSC is currently constructing a traveling spud carriage barge with an integrated booster pump. This barge will be coupled to Magnolia’s 18 in. Shark class dredge. The only dredge not currently on its manifesto is the SHARKUDA class dredge; however, Johnson noted “that may change in the near future.” “Our customers’ success is also our success. DSC focuses on providing both the dredging equipment and the support services to help ensure that happens,” said Bob Wetta, DSC co-owner, president and chief executive officer. “The equipment we manufacture lasts over 25 years, so we need to take advantage of the opportunities when they arise. If we miss a dredge sale, we may not have the opportunity to sell to that client again for a long time. DSC has been fortunate to have a high level of repeat sales to our client base, which is particularly of interest in growing companies like Magnolia. “We believe it is the overall experience and relationships we build with our clients. We listen to their challenges and we try to create solutions. Open minded clients such as Magnolia keep us on our toes to look for the next best thing we can dream up and build together.” Johnson went on to share some of their success stories and

the importance of having the right equipment. He talked about a project they worked on in Florida where the conditions were extreme, causing the flooding of homes and many other issues. He noted that with the use of a DSC dredge, they were able to go in and quickly improve the community drainage, their water quality and clarity, and ultimately it increased recreational use for the area. Another project shared was one located in Houma, La., in Bayou Terrabonne, where the numerous bridges and excessive traffic in the area presented multiple challenges. The only dredge that could complete this critical work had to have enough power to move the sediment along but also was easy to move. The Barracuda class dredge was perfect for this style of dredging, he said. As DSC continues to lead the industry with innovative technology, such as DSC Vision (a user-friendly bottom visualization system that provides dredge operators and managers with ability to stop “dredging in the dark”) and Dredge Rx (which allows dredge owners and operators to monitor and maintain their dredge fleet in real time, while on the dredge or while working remotely), Magnolia knew it had to add this to its already existing “toolbox”. According to Johnson, by the addition of these features, it helps Magnolia stay at the forefront of dredging trends enabling it to continue delivering exceptional project performance and thus ensuring the success of its clients and projects. Magnolia has already pre-purchased these upgrades for some of its dredge fleet and is now eagerly waiting for their installation. “Being able to see below the water while dredging is a

• Factoring safety, health and environmental concerns into projects • Expanding your knowledge and skills Unlike physical conferences where you can end up sitting through content you just don't need, AGC's Construction Safety, Health & Environmental Virtual Conference is delivered entirely online. Dip in and watch the specific sessions you would like to participate in or catch them all. It’s up to you! Registration is now open. Member Price: $350 | Non Member Price: $450 For more information visit https://shec.agc.org

Business Calendar

NATIONAL ASSOCIATION OF WOMEN IN CONSTRUCTION (NAWIC) 2021 NAWIC 66th Annual Conference Dates: August 11-14, 2021 Location: Embassy Suites Charlotte Concord Golf Resort & Spa JUNE/JULY 2021 CRANE SAFETY COURSES 5400 John Q Hammons Drive, NW June 30 – July 1, 2021 Concord, NC 28027 Critical Lift Planning & Lift Director Training, Houston, TX Description: The 2021 Annual Conference is focused on connecting July 6 – July 8, 2021 with peers, collaborating with other women in the industry, and conForklift Operator Train The Trainer, Orlando, FL structing a better future for all women in construction. The 3-day conJuly 6 – July 9, 2021 ference has two amazing keynotes, many educational breakout sesMobile Crane Inspector Training, Houston, TX sions, on-site training and certifications, and networking opportunities. July 7 – July 9, 2021 Who’s ready to Connect-Collaborate-Construct with other NAWIC Qualified Rigger Level 2 Training, Cincinnati, OH members and partners across the country? This year’s conference July 13 – July 14, 2021 will be in-person with a virtual component. The virtual component Qualified Signal Person Training, Orlando, FL will include live streaming and recordings of all general sessions, July 13 – July 15, 2021 keynotes, the installation luncheon and awards gala. As we continue Boom Truck Operator Train The Trainer, Houston, TX to receive support from our annual conference sponsors, we may be July 13 – July 15, 2021 able to record some or all of the breakout sessions to provide both Aerial Work Platform Train The Trainer, Cincinnati, OH in-person and virtual attendees the opportunity to see a session they July 15 – July 16, 2021 missed or want to see again. Critical Lift Planning & Lift Director Training, Orlando, FL This year’s Annual Conference offers a variety of sessions that will July 20 – July 23, 2021 focus on your professional development, industry education, and Overhead Crane Train The Trainer, Orlando, FL personal development, as well as NAWIC-focused sessions. Gain July 21 – July 23, 2021 new insight and perspectives from numerous speakers, expand your Rigging Inspector Training, Houston, TX network, and find new ways to strengthen and ampify your career. To register and for more information, please call or email Tiffany Our diverse topics offer something for every woman in every facet of Alston. Telephone: 800/654-5640, extension 238. our industry. Direct: 321/710-4641. Email: talston@cranesafe.com Registration is now open. For more information and to register, please visit ASSOCIATON GENERAL CONTRACTORS OF AMERICA (AGC) 2021 AGC Construction Safety, Health & Environmental Virtual https://www.nawic.org/nawic/Annual_Conference.asp. Additional questions on our Conference? Email us nawic@nawic.org. Conference Dates: July 20 – 22, 2021 AGC’s Construction Safety, Health & Environmental Conference is the ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) industry’s foremost annual conference to hone in on the most critical 2021 Leadership Conference August 16 – August 18, 2021 safety, health and environmental compliance and risk issues impact- Dates: Disney's Yacht & Beach Club Resort ing the business of construction. Whether your goal is protecting the Location: safety and health of the men and women working in construction or 1700 Epcot Resorts Blvd protecting the environment during the construction process – this is Lake Buena Vista, FL 328303 the conference for you. The conference provides educational options Description: Business relationships between employees and cusfor attendees through a mixture of plenary and breakout sessions tomers thrive when you have an effective and diverse leadership team which cover issues in three broad categories: in all areas of operation – from the branch level to the corner office. • Managing safety, health and environmental requirements and risk Cultivating those leaders requires education and networking opportu-

To view our Business Calendar online, go to www.constructionequipmentguide.com.

great feature that will allow our operators to be more efficient and productive. Cave-ins after dredging a particular area is common in the industry and being able to see this and correct it immediately will be a game changer,” Johnson said. “Magnolia Dredge & Dock LLC has a solid history of winning high-quality projects across the United States and we are honored that DSC’s dredges can be part of their story as they continue to build upon their historical successes, and expand DSC’s geographical footprint,” said Bill Wetta, DSC co-owner and chief technology officer. “Magnolia is very excited about our long-time collaboration with DSC,” Johnson said. “We view them as a strategic partner for both the growth and operation of our business. We have always been very pleased with their products, customer service and equipment performance and the personal relationships built over the years is incomparable to any other. One of the many things that stands out about DSC is DSC’s receptiveness and openness to create innovative solutions for any project Magnolia may need support on.” “We consider ourselves a leader in new technology for the dredging industry and we are always open to challenges,” said Wetta. “We have enjoyed the projects and challenges that Magnolia has brought to DSC. Both Magnolia and DSC share a common vision in technology and thinking outside of the box. I couldn’t be happier with the relationship DSC has earned with Magnolia Dredge & Dock.” For more information about DSC, visit www.dscdredge.com. 

nities. As the equipment distribution industry becomes increasingly competitive, it is more important than ever before to invest in leadership development for the future of the business. Take the opportunity to set up the new and future leaders in your dealership for success by sending them to the AED Leadership Conference. No other event will give you more focused expertise on building and optimizing leaders in your dealership. Attending will enable professionals to grow by delivering actionable content on leadership principles, the most relevant industry information, technology updates, and a platform to grow their professional networks and to learn from their peers. The Leadership Conference is one of the most highly anticipated industry events of the year across North America. There are many reasons attendees return year after year, including preparing for a promotion, inspiration for improving and motivating the team, and the overall quality of the program. Regular registration starts on June 21, 2021 and ends on July 25, 2021. Late registration starts on July 26, 2021. For more information and to register for this event, please visit https://aednet.org/events/leadership-conference. If you need assistance, please email help@aednet.org. HISTORICAL CONSTRUCTION EQUIPMENT ASSOCIATION (HCEA) 35th Annual International Convention & Old Equipment Exposition Dates: August 27 – 29, 2021 Location: Kocher Farm, 1151 Hawk Road, Glasco (south of Concordia), Kansas The Historical Construction Equipment Association International Convention and Old Equipment Exposition 35th Annual The Big Dig, hosted by Prairie Plowing Days, Concordia KS welcomes you! This is a working show! There will be dirt moving equipment; working scrapers, haul trucks, shovels ,cranes-both drag-line and Clam shell buckets, steam traction engines, prairie tractors, pull graders, motor graders, elevating grader, dozers , wheel loaders, perhaps the best way to imagine the demonstrations is if you could go back in time to the 1950’s and drop in on a major highway construction project. You will see nearly every type of equipment that would have been working on that job. There will be a rock crushing plant, a “Bin-A -Batch ready mix plant from the 1950’s and a host of other sites. There will also be a variety of static displays, cars, trucks, old crawlers and wheeled tractors, as well as vendors on site. Steam and prairie tractor plowing demonstrations. Questions? Please contact Cloud County Tourism at 785-243-4303, Kurt Kocher at 785-243-0083 or Brad Smith at 785-243-0067. Visit http://www.cloudcountytourism.com and click on “The Big Dig” for additional information. ASSOCIATON GENERAL CONTRACTORS OF AMERICA (AGC) AGC Annual Convention 2021 Dates: September 21 – 23, 2021 Location: Marriott World Center, Orlando, FL The AGC Annual Convention provides contractors of all sizes the opportunity to gain business-critical insights into the issues most

affecting their operations. From risk management to safety on the jobsite to the latest in project management solutions, AGC brings together experts from across the industry to share their knowledge and help prepare contractors to meet the challenges of today and tomorrow. And no time is better than now to prepare your company for the challenges (and opportunities) facing our industry as we collectively emerge from the pandemic, grapple with economic uncertainty, and navigate the legislative and regulatory policies of the new administration. Experience for yourself how the AGC Annual Convention provides contractors of all sizes and markets the opportunity to gain a competitive advantage, to help protect key business interests, make important industry connections, and to prepare for industry disruptions. Bring Your Team to the AGC Equipment, Technology & Construction Solutions Expo: The AGC Annual Convention is the place for construction superintendents, project managers, senior executives, and owners to hone their knowledge as contractors, and the AGC Equipment, Technology & Construction Solutions Expo provides a one-of-a-kind opportunity for your whole team to meet with more than 100 leading industry suppliers showcasing the latest tools, solutions and equipment to power your construction business. Registration is now open! For more information visit https://convention.agc.org/ ASSOCIATON OF EQUIPMENT MANUFACTURERS (AEM) The Utility Expo (FORMERLY ICUEE) Dates: September 28 – 30, 2021 Location: Kentucky Exposition Center 937 Philips Lane Louisville, KY 40209 We are excited to announce ICUEE has a new name: The Utility Expo. This all-inclusive name better reflects The Utility Expo experience – a place where professionals from all utilities come together to share new equipment, new ideas, and new solutions. Covering more than 30 acres, The Utility Expo is the largest event for utility professionals and construction contractors seeking the latest industry technologies, innovations, and trends. Top five Reasons to Attend The Utility Expo 2021: • See, touch and experience 30+ acres of new equipment, safety products, and technology • Network with 19,000+ industry peers from all utility sectors • Test-drive and compare the latest equipment before you buy or rent • Attend education right on the show floor to learn about the latest best practices from industry experts • Talk to product experts from over 800+ manufacturers and hear first-hand how to get the most out of your equipment Tickets for The Utility Expo 2021 are now available. The earlier you register, the more you save! To register, visit https://www.theutilityexpo.com/. For more conference information please contact 508-743-8531 or email us at TheUtilityExpo@Xpressreg.net.

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 61

LINDER INDUSTRIAL MACHINERY www.linder.com Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570 North Carolina Asheville • 828/681-5172 Charlotte • 980-777-8345 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031 South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/486-8080

POWER EQUIPMENT www.powerequipco.com Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283

TRACTOR & EQUIPMENT COMPANY www.tec1943.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Huntsville • 256/851-2222 Mobile • 251/457-8991 Montgomery • 334/288-6580 Tuscaloosa • 205/752-0621 Florida Panama City • 850/763-4654 Pensacola • 850/505-0550 Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500

OUR CUSTO OMER DEMANDS S BETTER QU UALITY AND PERFFORMANCE. The WA A600-8 is a top op performer in quarries acrosss North America. The powerful Komatsu engine, enhancedd torque converter and Smart Loader Logic allow the WA6000-8 to achieve low fuel consumption and high travel speeds. eds. A newly designed easy fill 9.2 cubic yard bucket retains material aterial better and provides better visibility, which contributes to significant improvements in machine efficiency and productivity vity.

• Integrated load ad meter and auto dig function • Increased tip loads for greater stability • Up to 13% better tter fuel consumption • New easy fill bucket design

Page 62 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

AIR COMPRESSOR SALES

PINNACLE CENTRAL COMPANY, INC.

RICHMOND MACHINERY

www.aircompsales.com GEORGIA 5490 Thomaston Road Macon (478) 474-8460

www.pinnaclecentral.com FLORIDA 103 Bryan Street Jacksonville (904) 354-5746 Polk City (888) 253-2444

www.richmondmachinery.com VIRGINIA 1701 Roseneath Road Richmond (804) 359-4048

MAKE POWER MOVES.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 63

Hitachi’s after sales solutions provide you with all the tools you need to manage your total cost of ownership quickly and easily, whenever and wherever you are. Utilize Hitachi’s Technology Programs and Apps to: ࠮ ,_[LUK LX\PWTLU[ SPML ࠮ 4HUHNL WYL]LU[H[P]L THPU[LUHUJL THJOPUL LɉJPLUJ` HUK VWLYH[VY WYVK\J[P]P[`

࠮ 4HUHNL `V\Y VWLYH[PUN JVZ[Z M\LS JVUZ\TW[PVU HUK VWLYH[VY LɉJPLUJ` PU [OL ÄLSK

*VU[HJ[ `V\Y SVJHS /P[HJOP ÔLLS SVHKLY KLHSLY VY ]PZP[ \Z H[ OP[HJOPÔLLSSVHKLYZ \Z `V\Y[VVSZ [V SLHYU TVYL HIV\[ [OL MVJ\ZLK /P[HJOP HWWYVHJO [V Z\WWVY[PUN `V\ `V\Y I\ZPULZZ HUK `V\Y /P[HJOP ÔLLS SVHKLYZ

CCS EQUIPMENT SALES

CLM EQUIPMENT CO., INC.

www.ccsequipment.com

www.clmequipment.com

Raleigh/Durham, NC • 919-556-9110 Angier, NC • 919-935-0505 Greenville, NC • 252-712-1033

Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Houston, TX • 281-598-2500

GSE GREAT SOUTHERN EQUIPMENT COMPANY www.gsequipment.com

Dealer Imprint Area Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892 Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400

REPUTATIONS ARE BUILT ON IT A FULL LINE OF WHEEL LOADERS

• 14 Models • 25 HP – 520 HP

Hitachi Construction Machinery Loaders America Inc. hitachiwheelloaders.us/yourtools

HEAVY MACHINES INC.

LINK-BELT MID ATLANTIC

www.heavymachinesinc.com

www.link-beltmidatlantic.com

Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453 825 31st Street North Birmingham, AL 205-323-6108 • 844-344-8658

Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248

Page 64 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EMPLOYMENT OPPORTUNITIES H E L P

WA N T E D

Crane Mechanics for American and Kobelco models

We have MULTIPLE positions available for the following:

Pinnacle Cranes, a leading Link-Belt Crane & Manitex dealer based in Charlotte, NC, is currently seeking Service Manager, to drive operational excellence within the division. The Service Manager will play a vital role in our strategy for improvement, growth, and will lead multiple continuous improvement initiatives. Candidate must be highly motivated to lead a team in exceptional customer service Candidates must have 10+ years of product support experience, including three years of management experience, preferably in the Crane industry. Email resume to: Jim Mackinson jmackinson@pinnaclecranes.com

Certified Boom Lacing Welders

Machinery Painters Each position should have at least 2 yrs. experience. For more information, please contact Service Manager Tim Shaheen: Office: 904-284-9670 • Cell: 904-759-0500 tshaheen@mobromarine.com www.mobromarine.com

MOBRO MARINE, INC.

Construction Software Company Offers Tips to Recruit, Retain Industry Workers LABOR from page 57

prompting,” he wrote. “Job seekers comparing industries will be eager to learn about income opportunities, as well as benefits and advancement opportunities.” The use of technology will be expected by job seekers, especially younger employees who have the potential to become career employees. Ensure employees are confident in your ability to use technology for communication and convenience in the field. • Improve conditions for current employees, the window into what the work experience is like within a construction company. “Now is the time to reduce cumbersome job tasks and eliminate slow payment issues that have been known to plague the industry,” said Chenault. Create open streams of communication with employees to ensure you’re doing everything you can to make your

employees feel connected and appreciated. “Happy employees serve as brand ambassadors to job seekers around them, he wrote. • Recognize difficulties for employees returning to the job market who may be working through a tough time financially as they emerge from the pandemic. “Employers will face a different situation when it comes to reaching payment agreements for new employees,” said Chenault. “Take time to reexamine your company budget to allocate funds to attracting and retaining long-term employees to the company.” Consider, as well, how the payment of new employees affects your staffers who have been sharing the load for years. “Consider using cash bonuses for certain achievements and long-term incentives to make all employees feel welcome and appreciated.”

• Express advancement opportunities for both current and new employees. “Without advancement opportunities, your employees could soon be seeking greener pastures,” Chenault said. “Investing in training programs and clearly communicating opportunities to advance shows employees they’ll be rewarded for their education efforts and hard work.” Providing these opportunities for all employees will help avoid the risks of competitors poaching your employees after they’ve received the proper training, too, he continued. “Take the time to occasionally meet one-on-one with your employees. Learn of their goals for the future and interests in advancing within the company,” he suggested. “A personalized approach is a great strategy for retaining construction employees.”  CEG

FLORIDA KELLY TRACTOR

LOUISIANA LOUISIANA CAT

www.kellytractor.com Miami 305-592-5360 Davie 954-581-8181 West Palm Beach 561-683-1231 Clewiston 863-983-8177 Ft. Myers 239-693-9233

www.louisianacat.com Alexandria 318-443-2577 Baton Rouge 225-296-0020 Belle Chase 504-433-1350 Bossier City 318-746-2341 Hammond 985-340-2820 Lafayette 337-837-2476 Lake Charles 337-439-3601 Monroe 318-323-1345 Praireville 225-673-3480 Reserve 985-536-1121 St. Rose 504-904-7421

RING POWER www.ringpower.com St. Augustine 904-737-7730 Brooksville 352-796-4978 Daytona Beach 386-947-3363 Gainesville 352-371-9983 Jacksonville 904-714-2600 Lake City 386-755-3997 Lakeland 863-606-0512 Ocala 352-732-2800 Orlando 407-855-6195 Palm Bay 321-952-3001 Sarasota 941-359-6000 Tallahassee 850-562-2121 Tampa 813-671-3700

MISSISSIPPI THE CAT RENTAL STORE AT THOMPSON MACHINERY TMRents.com Columbus 622-244-4610 Greenwood 662-459-7210 Belden 622-842-4322

NORTH CAROLINA CAROLINA CAT Serving Western North Carolina 800-277-2080 www.carolinacat.com Greensboro 336-294-5240 Charlotte - Main 704-596-6700 Charlotte - North 704-921-1178 Charlotte - South 704-401-5635 Monroe 704-292-1555 Hickory 828-464-7045 Asheville 828-251-2500

GREGORY POOLE EQUIPMENT COMPANY www.gregorypoole.com Raleigh 919-828-0641 Mebane 919-568-7500 Washington 252-946-1081 Fayetteville 910-424-4400 Wilmington 910-371-6301

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 65

SOUTH CAROLINA BLANCHARD MACHINERY www.blanchardmachinery.com West Columbia 803-791-7100 Simpsonville 864-963-3645 Rock Hill 803-324-9600 Florence 843-678-8520 Summerville 843-871-2001 Myrtle Beach 843-399-2074 Hilton Head 843-784-6766

TENNESSEE THE CAT RENTAL STORE AT THOMPSON MACHINERY TMRents.com Nashville 615-291-5444 Memphis 901-362-8883 Clarksville 931-905-3902 Jackson 731-988-4259

GEORGIA YANCEY BROS. CO. www.yanceybros.com Austell 800-282-1562 Albany 800-768-2892 Augusta 800-446-5131 Bloomingdale 800-482-1144 Brunswick 800-299-5010 Calhoun 800-752-9804 Columbus 800-633-5240 Dacula 800-545-2945 Macon 800-633-5180 McDonough 888-926-2392 Savannah 800-755-8382 Statesboro 888-764-6506 Valdosta 800-755-6841 Washington 888-678-3211 Waycross 888-948-2443

Page 66 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 67

MADE FO OR

AMERIC CA

SERVICE THAT’S T

LOCAL L SCHEDULLE A DEMO O

TODAY Y WITH A LOCAL DEALER Compact Radius

sanyamerica.co om

SY155U

THE IRONPEDDLERS 3504 N. Rocky River Road Monroe, NC 28110 800-438-1933 704-289-8591 30 Stoddard Garden Ct. Fountain Inn, SC 29644 864-409-1143 www.ironpeddlers.com

MECO MIAMI, INC. 5825 NW 74th Avenue Miami, FL 33166 305-592-4332 www.mecomiami.com

CENTRAL ATLANTA TRACTOR SALES, INC. 4240 Martin Luther King Jr Drive SW Atlanta, GA 30336 770-819-6600 www.centralatlantatractor.com

RICHARDSON SERVICE 1991 INC. 2667 U. S. 378, Conway, SC 29527 800-968-0754 www.rs91inc.com

TRAXPLUS 9800 Highway 503 Hickory, MS 39332 601-635-5543 www.traxplus.com

ATLANTIC COASTAL EQUIPMENT SALES & RENTAL 922 Longwood Drive Richmond Hill, GA 31324 912-459-1155 www.acesalesandrentals.com

EQUIPMENTSHARE 6575 Blanding Blvd. Jacksonville, FL 32244 904-654-2602 4235 Murfreesboro Pike La Vergne, TN 37086 615-488-4068 www.equipmentshare.com

Page 68 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE LOOKING FOR CAT 966F, CAT 980C, CAT 980F AND CAT 966E/D. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS, MODEL 580SK, 580L, 580LII, 580SL, 580SLII, 580M, 580MII, 580MIII 580SMII, 580SMIII, 580SMIII EMAIL: FRANKHORAN@GROFFTRACTOR.COM; PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY USED HITACHI EXCAVATORS EX200LC, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODELS. I NEED TO BUY CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET ––––––––––––––––––––––––––––––––

WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): MOXY MT30S-3 OFF-HIGHWAY TRUCKS LOOKING FOR REAR END DIFFERENTIAL FOR 30 TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 –––––––––––––––––––––––––––––––– WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPIONSERVICESFL.COM PHONE: 407-947-1355 ––––––––––––––––––––––––––––––––

WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT 777 F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– \WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 69

LLO OAD OA AD D UPUP U TO T

Operating Cappacity 1,050 to 4,2000 lbs.

w Rate Finance 0% Low Options Available

35 - 120 hp options

17 Loaders

CONTTACT A YOUR LOCAL GEHL ACT GEH HL DEALER R TODA AY! Y!

DELIVERING PERFORMANCE AND VERSATILITY Reliability, value and industry-leading performance are yours with our complete portfolio of mobile telescopic cranes.

Grove products are available in: > All-terrain models Capacities from 50 t (55 USt) to 450 t (550 USt)

> Rough-terrain models DON ALLISON EQUIPMENT, INC. www.donallisonequipment.com 233 Melville Road, Arley, AL 35541 800-669-6450 • 205-387-1600

Capacities from 30 t (30 USt) to 150 t (165 USt)

> Truck-mounted models Capacities from 36.3 t (40 USt) to 100 t (115 USt)

> Telescoping crawler models Capacities from 30 t (30 USt) to 127 t (140 USt) *AT PARTICIPATING DEALERS. EXPIRES .3 .21

SOLID DESIGN SOLID DES SIGN

> Industrial models Capacities from 8.1 t (9 USt) to 22 t (25 USt)

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 13-14 EB Call 866-294-6103

SPECIAL APPLICATION BUCKETS FOR ALL EXTREME APPLICATIONS. Hundreds in Stock. For ALL Excavator Models www.attachmentsintl.com • attintl@loretel.net or Call Us @ (218) 863-6444 12-13 AP

www.manitowoc.com

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color.

www.ringpowercrane.com

• Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

St. Augustine, FL 904-737-7730 Pompano Beach, FL 954-971-9440

Orlando, FL 407-855-6195 Tampa, FL 813-671-3700

Miami (Int. Sales) 305-477-8717 Union City, GA 770-774-7300

Concord, NC 704-795-3636 Ladson, SC 843-818-1954

Page 70 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Syracuse, NY July 15, 2021 For: Construction Equipment Dispersal & Real Estate • Cortland (Syracuse), NY July 16, 2021 For: Very Large Job Completion of Several Major Jobs • Canastota, NY July 17, 2021 For: Fanciest Late Model Construction Equipment & Alex Lyon & Son Barbecue • Cicero, NY July 18, 2021 For: Estate Auction • Dallas, TX July 28, 2021 For: Rentals! Late Model Construction Equipment & more • Cleveland, OH July 30, 2021 For: Job Completion Auction • Albany, NY July 31, 2021 For: Construction Equipment & more Retirement Auction • Pompey (Syracuse), NY August 4, 2021 For: Late Model Construction & Agricultural Equipment • Timed Online August 5, 2021 For: Late Model Construction & Agricultural Equipment • Racine, WI August 6, 2021 For: Very Late Model Snow & Construction Equipment & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Montreal, QC July 7-8, 2021 • Toronto, ON July 13-15, 2021 • CA Dealer Dismantler, CA July 16, 2021 • Wasilla, AK July 17, 2021 • Fort Worth, TX July 20-21, 2021 • Weston, WV July 22, 2021 • Dickinson, ND July 30, 2021

• Phoenix, AZ September 1, 2021 • Sacramento, CA September 22, 2021 ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • ONLINE June 15 – July 1, 2021 For: Town of Pleasant Valley NY Surplus Auction AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401 June 28 – July 4, 2021 • ONLINE July 5 - 11, 2021 • ONLINE July 12 - 18, 2021 • ONLINE July 19 - 25, 2021 • ONLINE July 26 – August 1, 2021 • ONLINE August 2 - 8, 2021 BAR NONE AUCTION www.barnoneauction.com 866-372-1700

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • ONLINE July 21, 2021 • ONLINE July 28, 2021 • ONLINE August 4, 2021

DEANCO AUCTIONEERS www.deancoauction.com 601-656-9768 • Philadelphia, MS July 21 - 22, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Sept. 15 - 16, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Nov. 17 - 18, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction

• ONLINE Sat., July 10, 2021 For: Sacramento Equipment Auction

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• ONLINE Fri., July 30, 2021 For: Woodburn Equipment Auction

• Pendleton, IN Fri., September 17, 2021 29th Annual Fall Auction

• ONLINE Sat., August 14, 2021 For: Sacramento Equipment Auction • ONLINE Fri., August 27, 2021 For: Woodburn Equipment Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE July 6, 2021 • ONLINE July 13, 2021 • ONLINE July 20, 2021 • ONLINE July 27, 2021 • ONLINE August 3, 2021

• Rocky Mountain Regional Event August 4, 2021

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• Tipton, CA August 11, 2021

• ONLINE June 30, 2021

• Houston, TX August 24-25, 2021

• ONLINE July 7, 2021

• Orlando, FL August 26, 2021

• ONLINE July 14, 2021

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE Thurs., August 4, 2021 For: Truck, Trailer & Attachment Auction IRON AUCTION GROUP www.ironauctiongroup.com 864-546-1216 • Acworth, GA Wed., June 30, 2021 For: Retirement Auction for Total Development, Inc. J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Timed Auction Tues., July 6, 2021 For: Online Only • Timed Auction Tues., July 13, 2021 For: Online Only

• Butler, PA Wed., July 14, 2021 For: Virtual/Live Broadcast John D. Clark Trucking, Inc. Complete Liquidation

• Online Only July 29, 2021 For: Wenco Energy Equipment & Materials Online Liquidation JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Atlanta, GA Wed., July 28, 2021 For: Jackson Paving Co. PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE Wed., June 30, 2021 For: Vehicles & Equipment Auction • ONLINE Thurs., July 1, 2021 For: Construction Equipment • ONLINE Wed., July 7, 2021 For: Ag Equipment

• Timed Online July 2 - 7, 2021 For: Steffes Auction, Upper Midwest Locations • Timed Online July 8 - 15, 2021 For: Antique Equipment Auction • Timed Online July 12 - 20, 2021 For: Multi-Party Construction Auction • Timed Online July 12 - 21, 2021 For: Tire, Track & Attachment Auction • Timed Online July 16 - 21, 2021 For: Steffes Auction, Upper Midwest Locations • West Fargo, ND Wed., July 28, 2021 For: AgIron West Fargo Event • Timed Online August 6 - 11, 2021 For: Steffes Auction, Upper Midwest Locations

• Fremont, NE Thurs., September 2, 2021 Large Late Model Truck, Trailer, Construction & Farm No Reserve Auction

• ONLINE Tues., July 13, 2021 For: Government Auction

• Mt. Pleasant, IA Wed., August 25, 2021 For: AgIron Mt. Pleasant Event

• ONLINE July 8 - 15, 2021 For: King Construction Co., Inc Public Auction

HUNYADY AUCTION COMPANY www.hunyady.com 215-361-9099

• Timed Online July 1 - 8, 2021 For: Gopher Excavating Retirement Auction

• Timed Online August 20 - 25, 2021 For: Steffes Auction, Upper Midwest Locations

• ONLINE Closes July 6, 2021 For: PennDOT Annual Heavy Equipment Auction

• Marietta, PA Fri., October 15, 2021 For: Truck, Trailer & Equipment Auction

• Stanton, TX July 14, 2021 For: Featuring Oilfield, Construction Equipment & much more

• ONLINE Thurs., July 8, 2021 For: Truck & Trailer Auction

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

• Marietta, PA Fri., August 13, 2021 For: Truck, Trailer & Equipment Auction

• Timed Online June 23 - 30, 2021 For: Bud’s Welding & Machine Shop Estate Auction

JACK NITZ & ASSSOCIATES nitzauctions.com 402-727-8800

GOVPLANET an IronPlanet Solution www.govplanet.com 844-225-8799

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• ONLINE July 1 - 20, 2021 For: Wenco Energy Equipment & Materials Liquidation Auction

• ONLINE Wed., July 14, 2021 For: Vehicles & Equipment Auction • ONLINE Thurs., July 15, 2021 For: Construction Equipment Auction • ONLINE Wed., July 21, 2021 For: Ag Equipment Auction

• ONLINE August 5 – 12, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

• ONLINE Thurs., July 22, 2021 For: Truck & Trailer Auction

• ONLINE September 30 – October 7, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506

• ONLINE December 2 - 9, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE June 30 – July 6, 2021 For: Vistra/Luminant Power Plants & Other

• Tolland, CT Sat., July 10, 2021 For: John Olender Corporation Retirement Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online June 23 - 30, 2021 For: Bud’s Welding & Machine Shop Estate Auction (ND) • Timed Online June 23 - 30, 2021 For: Steffes Construction Consignment Auction, Upper Midwest Location

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Online Only Fri., August 6, 2021 Public Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., July 10, 2021 Public Auction • Virtual Online Sat., August 14, 2021 Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Online Only Thurs., July 22, 2021 For: Ohio & Tennessee Auction • Kissimmee, FL Thurs., September 2, 2021 For: Florida Auction • Online Only Thurs., September 16, 2021 For: Multi State Auction • Findlay, OH Fri., September 24, 2021 For: Ohio Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 71

Public Auction held the 2nd Saturday of every month. Preview Every Monday - Friday 7am - 4pm Consignments Welcome Western Sales Management, Inc 1616 S 67th Ave. Phoenix, AZ 85043

623-936-3300 wsmauctioneers.com wsmauctionbiz@yahoo.com

Next Auction July 10, 2021

File Photo

Page 72 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JM Wood Holds Four-Day Auction in Montgomery, Ala.,

M Wood Auction held a four-day auction at the company’s Montgomery, Ala., headquarters facility on June 15 through the 18. At final bid, there was $52,000,000 plus in gross sales, including more than $21,000,000 in online sales, and more than 3,500 lots sold. Featured items included hundreds of late model Cat rental fleet machines and more than 100 Mack and Kenworth county owned dump trucks. Featured sellers included: Alabama Power Company; Gibbons Creek Power Plant; B & G Equipment and Supply; Flint Equipment; The Scott Bridge Company; ST Bunn Construction; and more than 300 other sellers. “This was the strongest summer sale in recent memory. Huge crowds were onsite and near record online attendance as well. Contractors are busy and they like coming to this Montgomery auction because of the quality and variety of the trucks and equipment we have here,” said Russ Wood.  CEG

Central Atlanta Tractor’s Chuck Spooner (L) and JM Wood’s Russ Wood discuss some the machines going on the block on day two of the sale.

This 91-year-old timberman from Southern Timber Company, Enterprise, Ala., attended the JM Wood Montgomery, Ala., sale site for first time. He specifically came to the auction looking for a smaller sized Cat dozer. Test operating a Takeuchi TB230 mini-excavator is Skip Walker, High Hills Equipment, Smyrna, Ga.

A couple of equipment dealers down from Tennessee to see what bargains could be found were Bill Woods (L), Woods Equipment, Nashville, Tenn., and Jason Snider, Snider Equipment, Jackson, Tenn.

JM Wood’s Wheeler Johnson (L) and his son, future third-generation auction man, Wheeler Johnson Jr., work the auction together for a couple of days.

Long-time friends Paul Fazzio (L) of Frank J. Fazzio & Sons, Pitman, N.J., and JD Gray of JM Wood Auction Co. watch as the machines roll across the ramp.

Test operating a Komatsu D39PX is Stephen Harnage of WH Pollard Excavation, Sebring, Fla.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 73

Featuring Hundreds of Late-Model Cat Rental Iron, More

Opening up a Kubota KX057-4 mini-excavator of interest is James Knight of Knight Timber Company, Whigham, Ga.

Looking over some of the dozers before sale time are Caleb Phillips (L) and James King of Granite Mountain Machinery, Conyers, Ga.

The early morning rush for machine inspection on day two, which was construction equipment sale day.

This Cat 320F was the main machine that Doris Stone and Joseph McConnell of JM Farms, Athens, Ala., came to auction to buy. Another fantastic selection of hydraulic excavators at this sale.

There are always some unique pieces at the JM Wood sale, including this pair of low-houred KATO iC120 crawler carriers.

JB Dunn (L) and Chris Benefield of Landworks, Heflin, Ala., were interested in some of the dozers about to go on the auction block.

Page 74 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALTA EQUIPMENT COMPANY (TAMPA)..........................................5

LAND EQUIPMENT INC ................................................................14

AMULET ....................................................................................30,34

LINK-BELT EXCAVATORS ........................................................38,39

ASCENDUM MACHINERY INC ........................................................2

M.T. KAYE STEEL LLC....................................................................22

BANDIT INDUSTRIES INC ........................................................46,47

MAGELLAN CONSTRUCTION ......................................................66

BARGAINS ......................................................................................69

MAY - RHI........................................................................................14

BOMAG AMERICAS INC ................................................................22

METSO OUTOTEC ........................................................................51

BRIGGS JCB ..................................................................................25

MOBRO MARINE INC................................................................31,64

BROOKS SALES INC ....................................................................14

NORAM ......................................................................................64,65

CAROLINA CAT..........................................................................18,27

PINNACLE CRANES ......................................................................64

CEG SCALE MODELS....................................................................52

POWER EQUIPMENT CO ................................................................6

COMPANY WRENCH......................................................................19

POWERSCREEN MID-ATLANTIC ..................................................43

CONSTRUCTION EQUIPMENT GUIDE ....................................28,68 DOOSAN PORTABLE POWER ......................................................62 DURA TECH INDUSTRIES ............................................................42 EQUIPMENT CORP OF AMERICA ................................................26 FAE USA INC ..................................................................................51 FELLING TRAILERS ......................................................................54 FLANGE LOCK................................................................................25 FLINT EQUIPMENT COMPANY ....................................................13 GEHL ..............................................................................................69 GROVE WORLDWIDE ....................................................................69 GSE GREAT SOUTH EQUIPMENT COMPANY ..............................9 HAMMER TRUCK SALES ..............................................................15 HEAVY MACHINES INC....................................................................3

SAND SCIENCE..............................................................................46 SANY AMERICA INC ......................................................................67 SCHAEFER ENTERPRISES ..........................................................30 SELECT CRANE SALES ................................................................14 SENNEBOGEN ..............................................................................49 SMH GROUP-US ............................................................................26 SMITHCO ........................................................................................55 SOUND HEAVY MACHINERY ........................................................10 SUMMIT SUPPLY LLC ....................................................................22 TERAN INDUSTRIES INC ..............................................................33 TEREX FUCHS ..............................................................................36 TEREX TRUCKS/VOLVO................................................................23

HILLS MACHINERY COMPANY LLC..............................................76

THOMPSON MACHINERY USED PARTS......................................30

HITACHI CONSTRUCTION MACHINERY ....................................63

TOWMASTER INC. ........................................................................56

HYUNDAI CONSTRUCTION EQUIPMENT ..............................16,17

TREKKER GROUP..........................................................................11

JAMES RIVER EQUIPMENT ............................................................7

WSM AUCTIONEERS ....................................................................71

JJ SCHECKEL CORP ....................................................................21 JOHN DEERE..................................................................................75

ALABAMA SUPPLEMENT

KLEEMANN ....................................................................................45

COWIN EQUIPMENT CO INC ..........................................................3

KOBELCO CONSTRUCTION MACHINERY ..................................37

GORILLA HAMMERS ........................................................................1

KOMATSU AMERICA CORP ..........................................................61

STONE EQUIPMENT CO INC ..........................................................7

KUBOTA EXCAVATOR ..............................................................58,59

THOMPSON TRACTOR CO ..........................................................4,5

LABOUNTY MANUFACTURING INC..............................................35

TRACTOR & EQUIPMENT CO INC..................................................8

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 30, 2021 • Page 75

+OHN%EERE COM %OZERS

DEADLINES? LET ‘EM EAT DUST. With the most horsepower in its class pushing a 161” available blade, the all-new 750L delivers deadline-crushing EF CIENCY /OT TO MENTION MONEY MAKING ACCURACY THANKS TO OPTIONAL SLOPE CONTROL WHICH CAN EASILY BE UPGRADED TO OUR FULLY INTEGRATED 4MART(RADEs % GRADE CONTROL SYSTEM 4O OPERATORS CAN HOLD GRADE WITH LESS EFFORT THE JOB IS DONE FASTER AND YOU MOVE ON TO THE NEXT ONE )EY IF YOUlRE GOING TO RUN YOUR WORLD THEN run.

Beard Equipment Company

Dobbs Equipment

Mobile, AL 251/456-1993 Pensacola, FL 850/476-0277 Freeport, FL 850/835-3337 Panama City, FL 850/769-4844 Tallahassee, FL 850/575-5600 Perry, FL 850/584-9200 Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Ocala, FL 352/732-4646

Riverview, FL (Main Office) 813/620-1000 Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Miami, FL 305/592-5740 Orlando, FL 407/299-1212 Pompano Beach Parts, FL 954/977-9541 Riverview Parts, FL 813/621-4902 Sarasota Parts, FL 941/960-2004 West Palm Beach, FL 561/848-6618

www.beardequipment.com

www.dobbsequipment.com

MOST HP IN ITS CLASS

161” BLADE

GRADE CONTROL OPTIONS

FLINT

www.flintequipco.com Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Adairsville, GA 770/773-9857 Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Braselton, GA 770/965-1889 Brunswick, GA 912/264-6161 Columbus, GA 706/687-3344 Grovetown, GA 706/855-5440

Macon, GA 478/788-1586 Savannah, GA 912/964-7370 Valdosta, GA 229/474-6680 Andrews, SC 843/221-4940 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Simpsonville, SC 864/963-5835 Walterboro, SC 843/539-1420 West Columbia, SC 803/794-9340

Page 76 • June 30, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2017 CASE CX60C, MX9766, BUCKET AND 2017 CASE 850M, DO5355, 1708 HOURS, THUMB, DOZER BLADE, NEW RUBBER WARRANTY THRU 3/28/22 OR 6500 TRACKS, 1230 HOURS ................$58,000 HOURS ........................................$90,000

2018 CASE CX145D, EX4102, BUCKET AND THUMB, DOZER BLADE, RUBBER TACKS, 2670 HOURS ................$119,000

2013 CASE 580SN, LB0603, 4WD, 1895 HOURS ........................................$47,500