Southeast 8, April 20, 2022 by Construction Equipment Guide

Published Nationally ®

Southeast Edition

April 20 2022

$3.00

Vol. XXXIV • No. 8

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Kelly Tractor Hosts Cat Operator Challenge in Ft. Myers...14

Florida Department of Transportation photo

Tech Helps Miller’s Construction Complete Range of Projects...20

A critical infrastructure project that will provide a new gateway to Kennedy Space Center and Cape Canaveral Space Force Station is under way in Florida. The $126 million undertaking involves building two highlevel fixed bridges over the Indian River, which links Kennedy Space Center, Merritt Island and Cape Canaveral to Titusville. “Since the original construction of the NASA Causeway Bridge in 1964, travel and transportation across the bridge has significantly increased, which has increased the need for it to be replaced to ensure the structure remains not only safe for travel, but enhanced for mobility and

By Cindy Riley

CEG CORRESPONDENT

Cemen Tech Products, Technology Broaden Opportunities...30

Table of Contents ..............4 Paving Section............35-51 Skid Steers, Compact Track Loaders & Attachments Section ......................53-69 Auction Section ..........79-81 Business Calendar ...........81 Advertisers Index ............82

connectivity as well,” said Suzanne Phillips, Florida Department of Transportation (FDOT) operations engineer. “Additionally, this is a drawbridge, meaning visitors, commuters and workers who depend on the causeway to travel must wait while it rises for large vessels to pass safely underneath. With the new construction, it will be replaced with a taller and wider fixed span causeway, thus eliminating the wait time for drivers for maritime traffic. “The upgrades also include increasing the payload for the bridge, which will allow large loads and transports with heavy machinery to use the see NASA page 26

The Right to Do It Yourself Is Right-to-Repair Order a Sleeper Issue for the Construction Industry? By Lucy Perry CEG CORRESPONDENT

Have you been following the Right-toRepair debate? Though President Joe Biden’s executive order limiting anti-competitive practices was meant to chiefly benefit consumers and farmers, it has implications for

the construction sector. And not everyone is on the do-it-yourself bandwagon. The aim of the right-to-repair order was to allow owners to self-repair personal electronic devices, automobiles and machines. Farmers would benefit from the opportunity to repair the heavy machinery they own, and see DIY page 46

President Joe Biden’s right-to-repair order allows owners to self-repair personal electronic devices, automobiles and machines. It benefits the ag industry and has implications for the construction industry.

Page 2 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

— ALL THE IN NVENTORY YOU O NEED,

GE EORGIA

NORTH CARO OLINA Asheville

Atlanta

828-687-0620

6788 318-9500

Charlotte

Savannah

704-596-8283

912 2-964-8079

Greenville

Ma acon

252-754-5280

4788 200-3300

Raleigh

TE ENNESSEE

919-661-8710

Ch hattanooga 423 3-308-7940

SOUTH CAROLINA

Knox xv ville

Piedmont

865 5-525-1845

Columbia

NO ORTH DAKOT TA A

864-704-1060

Fargo

803-791-0740

Charleston 843-414-1120

7011 271-2360

DOWNLOAD OUR 2022 2 PRODUCT GUIDE

Wiilliston

7011-577-1249

Scan cod de below to discover avaliable inventory nea ar you

ASCENDUM MA M CHINERY IS YOUR O LOCAL DEALE ER FOR NEW, USED USE ED AND RENTA AL EQUIPMENT. www.ascendummachinery.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 3

Page 4 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

SOUTHEAST EDITION

Circulated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana • Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

NCDOT OUTLINES CAPE FEAR MEMORIAL BRIDGE REPLACEMENT

In February, Wilmington, N.C., government officials revisited the city’s alternative funding options for the replacement of the Cape Fear Memorial Bridge, a contentious topic that straddles the line between necessity and unfavorable financing options.

ANALYSIS: STATE GAS TAX CHANGES HAVE LIMITED IMPACT

CEMEN TECH PRODUCTS, TECHNOLOGY BROADEN OPPORTUNITIES

The purchase of Cemen Tech volumetric concrete mixers have been leading to new revenue streams and new retail business for many contractors. The mix design, high quality of concrete pours and the ability to “adjust on the fly” the amount of concretewas just the recipe for Blackjack Paving and Sunbelt Asphalt.

KELLY TRACTOR HOSTS CAT OPERATOR CHALLENGE AT FT. MYERS, FLA., BRANCH

HYUNDAI EXPANDS ITS DEALER NETWORK WITH THREE NEW LOCATIONS

Kelly Tractor kicked off its series of 2022 Cat Global Operator Challenges at its Ft. Myers, Fla., branch on April 9. A large turnout of contestants and their families came out to see some of the best operators in the area compete for an opportunity to take one of the top spots.

Hyundai Construction Equipment Americas, which earlier this year expanded its dealer network with the addition of Taylor Construction Equipment locations, announced the addition of three new Hyundai-authorized Taylor locations, one in Mobile, Ala., and one each in Louisville and Philadelphia, Miss.

STATES MOVE FORWARD ON 16,000 PROJECTS IN FISCAL YEAR 2021

DAVID (D.J.) JACOB HUGHES JR. PASSES AWAY AT AGE 80

States in the Midwest led the way as transportation departments moved forward on more than 16,000 highway and bridge improvement projects in fiscal year 2021, according to a new analysis of Federal Highway Administration data conducted by the American Road & Transportation Builders Association.

David (D.J., Dave) Jacob Hughes Jr. passed away March 26, 2022, in Thomasville, Ga., at the age of 80. Mr. Hughes was the fifth child of eight children born to David Jacob Hughes and Viola Johnson Hughes. Along with his siblings, he grew up in Avery County in the small community of Frank, N.C.

TECH HELPS MILLER’S CONSTRUCTION COMPLETE RANGE OF PROJECTS

$2.7B BRIGHTLINE PLAN INCLUDES NEW RAIL BRIDGE IN JUPITER, FLA.

Third-generation employees Mike and Matt Miller have helped their family’s business, Miller’s Construction Company LLC, weather many storms over the past three decades. Based out of Anderson, S.C., Miller’s Construction primarily partners with repeat customers across upstate South Carolina.

A modern railroad drawbridge is planned to be erected soon spanning the Loxahatchee River in Jupiter, Fla., for Brightline, the company currently building a high-speed rail line to run between Miami and Orlando International Airport. The drawbridge’s construction began April 10.

POWER EQUIPMENT ANNOUNCES NEW GM OF CREDIT, FINANCE

Power Equipment announced the promotion of Tim Hancock to general manager, credit and finance. Hancock replaces Jim McNeillie, who after 40 years has retired from Power Equipment. Hancock will lead the credit and finance department for all Power branches.

Founder Emeritus (1930-2021) Edwin M. McKeon Sr. Southeast Publisher Richard C. McKeon Executive Publisher Teddy McKeon Editor In Chief Craig Mongeau Senior Editor Robby Chakler Editorial Assistant Katherine Petrik Contributing Editor Eric Olson Production Mgr. John Pinkerton Controller Judith Nixon Circulation Mgr. Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

Compass Auctions, located in Chattanooga, Tenn., has had a long history with heavy equipment auctions as “special events” for the company and its clients. The company changed its direction in 2022 and has committed to making heavy equipment part of its monthly auction.

SKID STEER, COMPACT TRACK LOADER SECTION 54

CEG’S SKID STEER AND COMPACT TRACK LOADER CHARTS

CATERPILLAR EXPANDS CAT COMMAND FOR LOADING TO D3 LINE

STAND-ON SKID STEER ATTACHMENTS HELPING BOOST EFFICIENCY

NEW HOLLAND LAUNCHES NEW C362 COMPACT TRACK LOADER

DEPARTMENTS 79 81

COMING AUCTIONS BUSINESS CALENDAR

EQUIPMENT 50

TRIMBLE Horizontal Steering Control for Soil Compactors

Richard C. McKeon

Kent Hogeboom

Rich Olivier

• North & South Carolina • Tennessee • Virginia

National Sales Manager

• Alabama • Arkansas • Georgia • Mississippi • Tennessee • Florida

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

Asphalt paving and aggregates professionals filled in a sold-out Music City Center exhibition floor in Nashville as World of Asphalt’s 20th Anniversary and AGG1 brought the industry back together. Running March 29 to 31, 2022, this year marked the fourth return of World of Asphalt to Nashville.

COMPASS PERFORMS AS HEAVY EQUIPMENT AUCTIONEER

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

WORLD OF ASPHALT, AGG1 BREAK RECORDS AT SHOW

YouTube

704/553-8888 704/726-1452 rmckeon@cegltd.com

Cell e-mail

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published biweekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

770/443-3174 404/831-9526 rolivier@cegltd.com

material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 5

SmartG G ade Gr

IS COM MING G!! G John Deere 333G SmartGrade a ad

Your o r Compa act Solu ution JUST GOT SMAR S TER. Id deal for Constru uction and Land dscapers, the Jo ohn Deere 333G G CTL L with SmartG Grade has Doze er Mode and Inttegrated Grade

Coming Soon n to a Jame es River Location Near N Yo You! www.jamesriverequipment.ccom

Page 6 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 7

Page 8 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NCDOT Outlines Cape Fear Memorial Bridge Replacement In February, Wilmington, N.C., government officials revisited the city’s alternative funding options for the replacement of the Cape Fear Memorial Bridge, a contentious topic that straddles the line between necessity and unfavorable financing options. Despite that, the bridge replacement remains a high priority for various local entities, reported Port City Daily, an online source of Wilmington-area news. The city’s Urban Area Metropolitan Planning Organization (WMPO) passed a resolution at the board meeting to ask the North Carolina Department of Transportation (NCDOT) to explore all options, including tolls and previous proposals, for replacing the 53-year-old structure across the Cape Fear River. In discussing its legislative agenda on March 30, the WMPO board talked of moving the replacement of the bridge to its highest unfunded priority. “It goes to the top, stars, [is] highlighted, [and has] neon signs going toward it,” said Deb Hays, a WMPO board member and New Hanover County vice chairperson. The Port City Times reported also that NCDOT Division 3 Engineer Chad Kimes gave an update to the board and said a committee, comprised of NCDOT staff from both his division and the agency’s Raleigh headquarters, as well WMPO Executive Director Mike Kozlosky, was formed almost immediately after the resolution passed in February to begin exploring possibilities. “We have done a lot in the last few weeks, to be honest,” Kimes explained. “This is rapid-movement research we’re doing here, but we’re trying to uncover every limb we can.” Key Crossing Needs an Upgrade The Cape Fear Memorial Bridge provides a key link for the more than 62,000 vehicles that travel U.S. Highway 17, U.S. 76, and U.S. 421 between Brunswick and New Hanover counties each day, just south of downtown Wilmington. The steel vertical-lift bridge first opened to traffic in 1969 and sports a 408-ft.-long lift span that can be raised 135 ft. to accommodate ships passing underneath. Now, however, NCDOT said the bridge is nearing the end of its usable lifespan. That, along with rising annual maintenance costs, and the difficulty in obtaining replacement parts, makes it imperative that a new bridge needs to be built. Kimes told the WMPO board that the state agency is looking at a three-pronged approach to the river bridge replacement: traditional delivery, conventional toll delivery. and alternative delivery.

Traditional Delivery A traditional design-bid-build project would require the Cape Fear Memorial Bridge to score high on the next round of NCDOT’s State Transportation Improvement Program (STIP), but it did not do well on the last prioritization round, a fact that frustrated local leadership. STIP is a multi-year capital plan for scheduling and funding state projects across the U.S. based on a scoring matrix. The program allows the allocation of federal and state money for such projects. While the STIP is a 10-year plan,

November, should infuse added money to the state. With a major source of STIP funding coming from North Carolina’s gas tax, concerns arose from Jonathan Barfield, a WMPO board member and New Hanover County commissioner, about how the state’s clean energy plan and the increased presence of electric vehicles will affect the tax. “As we see more hybrid and electric vehicles on the road, it’s definitely going to offset money coming in from the gas tax for the state,” he said at the March 30 meeting. “We need to be having this conversation at a local

Port City Daily photo

NCDOT will present its findings from a three-pronged approach for replacing the Cape Fear Memorial Bridge in late summer.

NCDOT updates it every two years to ensure it accurately matches the agency’s financial situation and statewide needs. For the replacement of the Cape Fear Memorial Bridge, NCDOT will update a feasibility study for the span, including cost estimates, to indicate where the project might fall on the next round of STIP prioritization. As of now, though, no funding is available for future projects since NCDOT is over budgeted by about $12 billion, according to the Wilmington news source; however, President Biden’s bipartisan $1.2 trillion Infrastructure Investment and Jobs Act (IIJA), which he signed into law last

level and recognize the dollars are dwindling.” Conventional Toll Delivery Initial discussions around the idea of a toll bridge over the Cape Fear River sprung up in 2021 when NCDOT presented WMPO with an unsolicited bid from a private investor. The company intended to bankroll the construction of a new bridge by instituting tolls for at least 50 years. The proposal came from a team of construction and engineering firms, supported by anonymous financial backers, who would assume the risk involved with design, construction and maintenance of the Cape Fear

bridge project for a time. NCDOT would keep its ownership and oversight for regular inspections, according to Port City Daily. But, after much debate, WMPO voted against it 7-5 last July. At the February 2022 meeting, WMPO officials revisited the discussion after the Wilmington Chamber of Commerce and Brunswick County passed resolutions expressing their support of alternative options for the bridge replacement. The Town of Leland on the west side of the river also passed a resolution asking for the bridge to be included in the STIP. Following that, the WMPO board passed a similar resolution requesting all options be explored. To pursue the feasibility of this route, NCDOT will look to its Toll Project Development Policy, implemented in 2018 with guidelines to “improve the department’s ability to manage a reliable transportation network, address congestion, leverage limited financial resources, and provide more user choice,” according to information on the transportation agency’s website. Alternative Delivery Like the unsolicited bid NCDOT received earlier, alternative options also are in the mix for consideration, the Port City Times noted. “We would send out a request for information to see if there’s any innovative solutions for another approach,” Kimes told the WMPO board. According to NCDOT’s phased-in strategy, innovative solutions could include “buildability concepts and financial alternatives.” As was mentioned at an earlier WMPO meeting, the original proposal is “not the only game in town.” Bids could come from a variety of sources around the nation. NCDOT said proposals will be screened for viability, including technical, environmental, engineering and legal, as well as financial. All screening analysis will be presented to the WMPO board for consideration prior to further pursuit. Kimes told the online Wilmington news site that there are some things NCDOT will not consider for funding a replacement bridge. For instance, he explained that it is not within NCDOT’s authority to request special help or appropriations from the North Carolina General Assembly. Additionally. local funds will not be included in any analysis, the agency noted, unless specifically requested by WMPO. “We hope to have all this wrapped up by late summer to give you our findings,” Kimes told WMPO. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 9

In Stock!

The Peerfect Combina C ation of POW WER, VERRSA RSATILIT ATTILIT T TYY,, & PRRODUCTIVITY V Gradall XL 3300 V wheeled d excavator Precisely position buckets and other attachments using this Gradall XL L’s unique e, innovative 220 degree tilting g, ar boom. Because the entire boom b tilts, there’s no loss of po telescoping, triangula ower, typical with other boom s to work off the front, rear, r or either side without usin ng end tilt machines. Its 4X4 undercarriage provides stability g operation on the toughest te errain. outriggers, facilitating

When you need us, wheere you need us

Schedule a Demo Tod oday!

Equippment • Parts • Service

www.ggsequipment.net Tampa a 866-586-8956

Orlando 407-859-9160

Talla a hassee 850-5774-0892

Fort Myers 239-334-60663

Ocala 866-586-8956

Jacksonville 904-268-4400

Pompano Beach 9 954-327-8808

Page 10 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Analysis: State Gas Tax Changes Have Limited Impact

All Makes Undercarriage Parts Also Carry Bucket Teeth and Cutting Edges Caterpillar® John Deere® Komatsu® Case® Hitachi® Liebherr® Volvo® Kobelco® Kubota® Bobcat® Takeuchi®

Call For a

FREE ESTIMATE!

Tractor Tracs Inc. Undercarriage Specialists 5505 Caterpillar Drive, Apex, NC 27539

919-387-1050 • 888-526-9740 • www.tractortracs.com

Do gas tax holidays automatically result in significantly lower prices and big savings for motorists at the pump? The short answer is “no,” according to new research from the American Road & Transportation Builders Association (ARTBA). The association examined 177 changes in state gasoline tax rates in 34 states between 2013 and 2021 and found that on average, just 18 percent of an increase or decrease was passed on to motorists in the retail price of gasoline in the two weeks after a change took effect. The results come as 24 states have either enacted or are considering a temporary suspension of their gas taxes or other transportation-related user fees. Legislation also has been introduced in the U.S. Senate and House of Representatives to suspend the federal gas tax for the rest of the year. “In the middle of the Russian invasion of Ukraine and record inflation along with high gas prices, efforts by federal and state lawmakers to bring relief to consumers are wellintentioned,” ARTBA Chief Economist Alison Premo Black said. “But they are ineffectual in the short-term and they compromise revenues for transportation improvements in the long-term.” The study, conducted by Black and ARTBA Transportation Investment Advocacy Center Director Carolyn Kramer, used data from the Oil Petroleum Information Service (OPIS) and the U.S. Energy Information Administration (EIA). ARTBA’s conclusions mirror those of other previous academic studies: the price of crude oil is the primary driver of changes in the retail price of gasoline, not gasoline taxes. The report looks specifically at 2021 gas tax rate decreases in New Jersey and Georgia. New Jersey decreased its gas tax rate 8.3 cents-per-gallon on Oct. 1. The per-gallon price of gas stayed constant for three consecutive days, then began to increase with rising crude oil prices. By the end of the month, New Jersey motorists were paying 7 percent more for gasoline. In fact, they paid more for gasoline every day for the rest of 2021. In Georgia, Gov. Brian Kemp on May 10 suspended the state gas tax of 28.7 cents for a month when a computer hack shut down a key pipeline. The price of gas spiked from $2.87 on May 10 to $2.97 on May 14, then settled at $2.91 per gallon on June 2 when the gas tax was reinstated. Despite the reinstatement of the 28.7-cent gas tax, the average price of gasoline remained at $2.91 for the rest of the month. “The New Jersey and Georgia cases highlight the negligible effect changing gas tax rates can have on retail gas prices,” Black said. “That’s why gas tax holidays are not the best policy for rising prices — they take money away from transportation system investment and don’t necessarily stem the pain consumers feel at the pump.” The full analysis is available at www.transportationinvestment.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 11

Page 12 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 13

On today’s jobsite, precision is power. John n Deere SmartGrade™ Excavaators include a variety of graade-control options to give you y the power of choice. Choose from integrated 2D guidannce all the way up to SmartGrrade™ 3D grade control and hit h grade fa faster. Operators att every level of '&%'$#'"!' # ' ' #! " ! " '" ! #' ' $ ' # ' # #" ! $' $ $ $ ' $' # ' #$ $ '"!' '$ $ " '$ # $ '! ' % $ ' ! #"' " ' # " " " # ' '&# # # " $$ !' $ ' %' !' #" ''$' $ ' " ' '" # " upgrades are easy and ready when you are. Call C or visit us today to learn n more.

Adairsville,, GA..............770.773.9857 Albany, GA ...................229.888.1212 Andrews, SC.................843.221.4940 Atlanta, GA ..................404.691.9445 Aynor, SC .....................843.358.5688

Braselton, GA...............770.965.1889 Brunswickk, GA..............912.264.6161 Columbuss, GA ..............706.687.3344 Cuthbert, GA................229.732.2631 Dothan, AL A ..................334.794.8691

FlintEquipCo.com m

Grovetown,, GA.............706.855 G 5.5440 Ladson, SC...................843.572 2.0400 Macon, GA...................478.788 8.1586 Savannah, GA...............912.964 4.7370 Simpsonville, SC ...........864.963 3.5835

Troy, y, AL........................334.566.4181 Valdosta, GA ................229.474.6680 Walterboro, SC.............843.539.1420 West Columbia, SC .......803.794.9340

Page 14 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

On the Load and Go challenge, Leonel Lopez of Quality Enterprises USA, Naples, Fla., uses a Cat 950M wheel loader to load up a Cat 725 articulated truck. Kelly Tractor’s Olivier Duchatellier (L) and Jamie Hoffman discuss the course layout before the contestants arrive.

Plenty of kids came out with their families to see the challenge events, with some of the future operators taking the opportunity to get some “stick time” themselves.

Kelly Tractor Hosts Cat Operator Challenge at Ft. Myers, Fla., Branch

elly Tractor kicked off its series of 2022 Cat Global Operator Challenges at its Ft. Myers, Fla., branch on April 9. A large turnout of contestants and their families came out Brian Martinez of LJ Clark Construction operates a to see some of the best operators in the area compete for an Cat D3 in the “Precision Tracktor” dozer challenge. opportunity to take one of the top spots, compete against other Kelly Tractor top contestants at upcoming challenge events, move on to regional finals and potentially advance to the Global Operator Challenge Finals at ConExpoCon/AGG 2023 in Las Vegas where Caterpillar will crown one operator as World Champion. This is the first of three competitions that will be held by Kelly Tractor; the next challenge will be held on April 30 in Ft. Pierce, Fla., and the final challenge will be held at the company’s headquarters in Miami, Fla., on May 21. The top three contestants at the Ft. Myers Operator Challenge were: John Gomez, LJ Clark Construction Inc; Dylan Reed, Quality Enterprises USA Inc; and Chris Dietrich, Chris Inc.

Jamie Hoffman, one of Kelly Tractor’s certified dealer instructors explained the overall layout of the course. “We have five challenges — a dozer, an excavator, a loader, a compact track loader and a mini excavator competition. We needed to design each challenge to make it as tough as possible for each contestant because we are looking for the absolute best operator to represent south Florida in the North Carolina regional finals.” To ensure the upcoming challenges have the same degree of difficulty as the Ft. Myers event, every possible detail of the overall course is measured and mapped out and will be duplicated at the Ft. Pierce and Miami course locations. “This could not have been done without the team we had helping. These challenge events are not a one or two person show. From marketing to our demo instructors to the company owners, this is a full Kelly Tractor team effort and I appreciate every one of them,” Hoffman said.  CEG (All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.)

Mike Hinz of the U.S. Army Corps of Engineers, based in Clewiston, Fla., operates a Cat 326 excavator with Grade Control to makes a run at the excavator challenge as Archie Justiniano (R) of SITECH waits to check the grade of the final dig.

Chris Dietrich of Chris Inc., Ft. Myers, Fla., had a great run in the compact track loader challenge, which helped to lead him to one of the top three spots in overall scoring.

Making a run at the min-excavator challenge is Kole Truckenmiller of Woods & Wetlands Inc., North Ft. Myers, Fla.

John Gomez of LJ Clark Construction, Moore Haven, Fla., and his three-year-old son Caleb got a little fatherson time playing in the sand in Ft. Myers.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 15

ranes, Boom m Trucks an nd More!

View our used inventory at:

used.R RingPower ingPower.com/C Crane rane

N E W & USE D SAL ES • RENTA LS • P A R T S • S E R V I C E • FLORIDA

US SED CRANES WANTED. ALL BRANDS A B CONSIDERED.

904-494-1418 9 9 904-494-1415

ww ww.RingPowerrCrane.com

GEORGIA A

N. Carolina

St. Augustine (Corp)

P Pompano Beach

TTaamppa/Orlando

Miami (Innt’l Sales)

Union City

Concord

S. Carolina Ladson

904.494.1219

954.971.9440 9

407.8855.6195

305.477..8717

770.774.73000

704.795.3636

843.818.1954

Page 16 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Transportation Improvement...

GOOD BUYS ON

NEW & USED IRON SOLD 2021 CAT 908M 745 HRS, SKID STEER STYLE COUPLER BUCKET AND FORKS, LIKE NEW COND $110,000

2017 KOMATSU D39PX-23

2008 HITACHI ZX270LC-3

2001 KUBOTA KX41-2

11,922 HRS 60 TO 70% U/C, 48" BUCKET W/ MAIN PIN HYD. THUMB, PATTERN 1531 HOURS, LIKE NEW CONDITION, 75 & PLUS U/C CHANGER OVERALL VERY DRY & TIGHT. V.GOOD COND $59,500 $125,000

3105 HRS, 50% PLUS U/C, OVERALL GOOD CONDITION

$12,000

Guy Roof 2036 Bishop Rd. Greensboro, NC 27406

2000 CAT D6MXL

2007 FORD F750

CAT CERTIFIED REBUILD. ( WITH DOCUMENTATION) REBUILT IN 2016 HAS 1538 HOURS SINCE REBUILD. U/C 75 TO 80% LIKE NEW COND. COMES W/TOPCON GPS

169,600 MILES CAT C7 DIESEL, EATON 6SP, 33K GVW, STELLAR 20K HOIST, DONAVAN HITOWER TARP SYSTEM, VERY GOOD COND.

$99,500

$39,500

336-382-9715 cecarolinasinc@aol.com Free Delivery within 200 Miles!

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER KOMATSU D65EX-15

Made in the USA

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com

for more information or contact us at 1-800-683-5189

States Move Forward On 16,000 Projects in Fiscal Year 2021 States in the Midwest led the way as transportation departments moved forward on more than 16,000 highway and bridge improvement projects in fiscal year 2021, according to a new analysis of Federal Highway Administration (FHWA) data conducted by the American Road & Transportation Builders Association (ARTBA). The association’s “Federal Highway Investment Benefits by State” dashboard, compiled by Chief Economist Alison Premo Black, shows that states leveraged $31.4 billion in federal funds with their own funds to advance nearly $57 billion in projects. The top five states with the most projects are: • Missouri: 1,040 projects • Michigan: 903 projects • Ohio: 796 projects • Indiana: 731 projects • Tennessee: 663 projects Nearly half of the projects — 43 percent — were for repair or reconstruction work. An additional 20 percent was used for adding capacity, such as a new lane or major widening, to an existing roadway. Six percent of funds were invested in new roads or bridges. A map allows visitors to see how each state deployed federal funds and the top projects that received federal support. The five largest projects nationally that include a mix of federal, state, local, and private funds, are: • Georgia — SR 400 North Springs Marta Station to McFarland Road Express Lane ($3.8 billion) • Arizona — I-17 Split ($899 million) • Texas — Construct new roadway lanes/reconstruct existing roadway on IH 35E ($715 million) • Nebraska — 20th St., Missouri River Omaha ($607 million) • Louisiana — LA 1: Leeville to Golden Meadow, Phase 2 ($524 million) “One of the most attractive benefits of major public investments in transportation infrastructure is they foster immediate economic growth and create tangible capital assets that are long-lived,” Black said. “We expect to see even more projects in the coming year as states work to obligate the record increase in FY 2022 federal funding available through the Infrastructure Investment and Jobs Act (IIJA) that was approved by Congress,” Black added. The dashboard aims to provide U.S. taxpayers, elected officials, news media and the public with greater transparency about how federal highway program funds are invested annually. It allows users to see how each state annually deployed federal funds and features the top projects dating back to 1950. Black populates the dashboard using the data states submit to FHWA’s Fiscal Management Information System (FMIS). For more information, visit www.artba.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 17

Page 18 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLEVEELAND BROTHER RS USED EQUIPM MENT

2014 CATERPILLAR 328DLCR

2018 CATERPILLAR 330FL

2019 CATERPILLAR D8T

2015 Caterpillar 335FLCR

$153,000

$184,000

$745,000

HRS $235,000 2,777 ID# UP17104

5,548 HRS ID# UP19596

4,149 HRS ID# UP19597

SOLD

2,604 HRS ID# UP 19602

2017 CATERPILLAR 325FLCR

2011 CATERPILLAR D6T

2012 Caterpillar 390DL

2017 Caterpillar CS66B

$200,000

$257,250

$410,000

HRS $139,000 974 ID# UP19055

3,851 HRS ID# UP19595

3062 HRS ID# UP19430

For our FULL IN NVENTORY Y,, please click or call

www.Cleve elandBrothers.ccom/Used | 866-9956-8733

13,490 HRS ID# UT16949

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 19

USED PAR ARTS

THE BEST VAL ALUE AND BEEST SELECTION OF CAT® PA ARTS & CO OMPONENT TS

CLEVELAND BR ROTHERS PROVIDES ALL YOUR Y USED PARTS AND EQUIPMENT NEEDS

D6T & D8T Winches Available

• Good used inspected • Rebuilt • Repaired • All winches are inspected and tested

WWW.CLEVELANDBROTHERS.COM USED PARTS - 1.877.544.3155

Page 20 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tech Helps Miller’s Construction Complete Range of Projects Third-generation employees Mike and Matt Miller have helped their family’s business, Miller’s Construction Company LLC, weather many storms over the past three decades. The brothers grew up learning the business inside and out. “Our grandfather, Coy Miller Jr., founded the company in 1950,” said Mike. “He worked together with our dad, Waymon, and they built houses and laid sewer and water lines. When our grandfather’s health deteriorated in the ‘80s, our dad took over the company. Although Dad’s now retired, he remains an active part of the business. “We’ve been growing since 1985,” said Mike. “We were residential- and commercial-based primarily, but as times have changed and technology has improved, we’ve transitioned to more commercial and industrial work. Those projects can range from the restaurant you’re having lunch at to the gas station down the road or the school your kids go to.” Based out of Anderson, S.C., Miller’s Construction primarily partners with repeat customers across upstate South Carolina. “We’ve worked with a lot of the same customers since I joined the company a little over 35 years ago,” said Mike. “We’re around 50 employees currently, but depending on the season, we can more than double that number. One of the main reasons for our growth is that our customers trust that we will do the job right the first time.” GPS Technology Transforms Production According to Matt, the Great Recession forced the company to work smarter. “Before the economic downturn, we were up over 120 employees,” said Matt. “To sur-

Mike Miller, vice president of operations/project manager

Matt Miller, project manager

A Komatsu PC360LCi-11 iMC excavator operator for Miller’s Construction cuts a slope directly to grade and places the material into the bed of a Komatsu HM300 articulated truck.

(L-R): Tyler Halbert, Linder sales representative; Jay Thomason, Linder project support representative; Buck Sisk, superintendent; Mike Miller, vice president of operations/project manager; Matt Miller, project manager; and Brady Miller, junior project manager, work together to efficiently complete projects. Miller’s Construction trusts Tyler and Linder to take care of its equipment needs.

Brady Miller, junior project manager

vive, we had to find ways to work more efficiently than our competition. In about 2016, we started using GPS technology.” “It was challenging at first to justify spending extra money for the equipment because it was completely new to us, and we were unfamiliar with its capabilities,” said Mike. “As we’ve moved forward and learned, it has become clear that GPS technology is the future of the industry. We’re at the point now where most of our equipment utilizes technology.” Today, Miller’s Construction has five Komatsu intelligent Machine Control (iMC) machines: a PC360LCi-11 excavator, two D51PXi-24 dozers and two D61PXi-24 dozers. The company’s fleet also includes see MILLER page 32

At a school job site, a Miller’s Construction operator primarily uses the Komatsu PC138USLC excavator for tasks related to utilities.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 21

Page 22 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

563-8 872-4 41112

Bellevue (Dubuque), Iowa sales@jjjscheckel.com RENT OR

RENT OR

BUY!

2016 CA AT D11T Rebuild - $$1,485,000 ,

2015 CA AT D11T - $1,285,000 $ ,

In Process. Zero Z Hourr,, CAT CAT certified ifi d PPow wertrain rebuild b ild Zero Hourr,, CAT certified ifi d PPowertrain rebuild b ild w// 4 yearr,, pp r,, Good G d UC. U w/ 4 yearr,, 6,000 hr warranty.y U Blade, SSS Ripper pp r,, 100% 6,000 hour warranty. U Blade, SS Riipper il now! Excellent history,y, straight & cleaan. AAvailable N UC. Excellent history. Available Suummer 22022. New

2012 CA AT D10TT - $788,000 ,

2013 CA AT D66T LGP - $198,000

2013 CA ATT D6T LGP - $198,000

5,500 Hours on certified ifi d componen p t rebuild. b ild CAT AT dealer serviced and maintaained. l , MS ripperr,, i d U BBlade Hydraulic ladderr,, Like new undercarriage. i

A03003. 6,475 Tota T all hhours, 2,185 2 185 HHours at idle. idl

3,690 Actual oper p atiingg hours. VPPAAT,T, Allied winch. GPS reeady dy,, GGoodd UC UC. DDocumented history.

A03004. 7,0666 To Totall hhours, 2,368 2 368 HHours at idle. idl 4,698 Actual operatingg hours. VPPAAT,T, Allied winch. l DDocumented history. Good UC, UC Ve Very clean,

2019 CA AT 336 Next Geen - $288,000 ,

2018 CA AT M3188F - $$238,000 ,

(3)2015 CA ATT MH H3059’s - $$348,000 , EA.

2019 Volvo o L260H - $288,000 ,

2019 CA AT 745 - $4488,000 ,

2018 CA AT 7455 - $358,000 ,

((2)2016 ) CA ATT 7225C’s - $248/268,000 ,

2018 Voolvo A25G - $$298,000 ,

2015 CA AT 836K - $4588,000

2007 CA AT 826H - $288,000 $ ,

2012 CA ATT 16M VHP P Plus - $888,000 ,

2011 CA AT 1400M VHP - $248,000 ,

B POWERTRAIN PLUS REBUILDS

ADES R HOLMES SMOOTH DRUM ROLLERBL

2015 CA AT 390FL - $6988,000

6,300 Hours, 1 Ye Year reemainingg CAT AT Po P wertrain + y warrantyy, 11’2””Mass ” Hydraulics stick, Removable counterweight, Straight and clean.

2016 CA AT 980M - $268,,000 ,

7,570 To Total frame hours, 3,167 Hours H att idle. dl Onlyy 4,403 Actual workingg hours. Radial tires, e 7.5 Ya Yardd k Ride GP bucket, Rid control.

Wheeled excavatorr,, 475 total hours, Aux A hy hydraulics, d 3,700 Total hours, 1,486 Idle hours, h A l y Auxiliary M i l handlers, Material h 1 10,500 Hours, high h gh idle dl hours h . 7,320 Hours, 2,,333 Idle Idl hours, h 9.5 Ya Yardd GP bucket, b k Variable adjustable ” Hy tilt Ground access high hydraulics, 2D Grade control. 10’66”” Stick, 54””Bucket, j boom,, 8’6”” Stick, 60””Hyd g risee cab, 325 HPP,, 35’Boom, 29’ S 29’Stick, Ride control, 8875 Radial tires, Dealer maintained, 35’ B bucket, k Outriggers, O i P h bl Push blaade, d Super S clean machine. Setup for grapple l or magnet. 130,000 lbs. History. Documented history, Very clean machine. Docum mented history,y, Super clean.

3,160 Total frame hours, 1,380 Idle dl hours, h 1,780 8,640 Total frame hours, h 3 3,303 Idl hours, Idle h 5,337 66,400-7,850 400 7 850 Total T fram me hours, ≈ 3,000 Idle Idl hours, h Actual workingg hours. Good tires, Original g condition, Actual working hours. 85% plu p us Tires, Original g condition, 3,896-4,643 Actual oper p atingg hours. Good tires, Factory tailgate, il hi d aler hi hi pairi available. Full servvice history. All service performed f d by b de l w/ fullll history avail. Original condition di i n, M Matching

4,350 Hours, Exceellent radials, Tailgate, Original g l paint, Dealer insspec p ted and pr p essure tested, d l as they come. as gooodd andd clean

2014 Case IH Steiger g 580 Quadtrac Q

K-TTec e 12333 Scraper PkgS Pkg $588,000 $588 000 1 Ye Year factoryy Warranty remaining e g, 8,2755 Total T l hours, 9,800 Hours on Complet pl e Dealer D l RRebuild. b ld Good G d used Verified 3,150 total hours, 1,196 Idle Idl hours, h Only ly 1,953 , Verified 735 total hours, 451 Idle Idl hours, h Only ly 284 & K 2,275 Hours H on the h QQuadtrac, d Riigged gg d andd ready dy to ggo. p attion. Service compac p tor w/ fullll maintenance & service history. actual working hours. 16’’M Moldboard, Ripper pp r,, Grade 2,937 at idle, onlyy 5,338 3388 hhours iin oper i G d actual workingg hours. From state DOT,T, Store inside. i id i i d E clean andd wellll maintained. history since new. Excellen E ll t ffeeet. Clean, Cl rready to work. E ll feet, Clean cab, Testeed to OEM specs. Excellent Control Arrangement, A 1 Ownerr,, Fulll hi history. 14’Moldboard, dM Mid-m id mount Scarafier V Ripperr.. Tier 3. 33 YYaard scraperr,, Extremely

RENT OR

B UY !

NEW! Ready to ship!

( ) (2)2017 John Deeere 9520RX & 2014 K-TEC C 1233 - $1448,000 , (3)2014 ) XQ300 Generators - $$24,000 , Ea. p y ppullll scraper p r,, very nicce & clean. l 7 500 HHours, 300 KW, Bothh single 7,500 i l & 3 Phase Ph po p werr,, 2 Models, 11’or ’ 16’’ cutting i g width. Made in i Iowa. 2412DE 12DE Scraper S p Pk kg’s- $488,000 kg’ $488,000 Ea. 36 YYaard capacity 2006 CA ATT D10T Rebuild Inn Process Construction iithh jjoystick Comes with y tii k controlsl , harness h s & hitchh ffoor 50 HP CAT AT Di Diessell engine gi , Wea W ther thh & soundd pr p ooff i grade d , extreme dduty. For haul h l roadd & siti e 44,400 400 HHrs, 24 YYaard scraper p r,, Ex Extremely ly clean l andd wellll. - $998,000. Zero hour Powertrain Plus, l o A40 A40. EEstima tii tedd 11,400 400 hhrs use. RReaar push block. enclosure, Trailer mounted, d Maintained i d bby CA CAT dealer d r.. lleveling li , compacting i & sealing li di dirt prior i to rain i event. maintainedd. Dealer h ory. Volv l testedd & inspectedd w// full f ll hist hi Holmes 11F - $28,50 , 0 / 16F - $34,500

OEM CAT AT Warranty. New undercarraigge g , U Blade, M ch/2021 SS Ripperr,, Pre-emissions! Available Mar

visit

c eckel.com JJSch

and watch w our new company viddeo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide. We are easy to work with & will not be beaat on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663-872-4112 63 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us ffoorr daily updates:

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 23

www.link-beltmidatlantic.com Ashland, VA 800-552-3837 Chesapeake, VA 800-342-3248 Frederick, MD 833-546-5235 SALES SERVICE PARTS RENTALS

Page 24 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FUEL EFFICIENT PUMPS FOR SALE & RENT

WEE HAVE PUMPS IN STOCKK!

Self-Priming Tr Trash Pump

aflo™ Submersible Hydraulic Tr Trash Pump

Rotary Wellpoint, Wellpoint Se Self lff--Prriming Dewatering & Hydraulically-Driven Bypass B Trash Pumps

Rotoflo R Rot oflo™ Wellpoint Dewatering

Call for f a FREE Project Revie ew: 772-770-0004

Big Pumps with Flows fro om 5-1M GPM

Paull@mwipumps.com

Turn-key & Cost-Effective e Solutions

mwip pumps.com

Fast Response, Expert Se ervice & Repair The Power to Move ve W Wa ater® Since 1926 | mwipumps.com

Power Equipment Announces New GM of Credit, Finance Power Equipment announced the promotion of Tim Hancock to general manager, credit and finance. Hancock replaces Jim McNeillie, who after 40 years has retired from Power Equipment. Hancock will lead the credit and finance department for all Power branches. “Tim has been with Power Equipment for 13 years serving in the credit department. Tim’s patient and courteous approach with our customers will certainly be an asset for our company. Tim is a great leader and I look forward to working with him as our company continues to grow,” said Andy Moon, president of Power Equipment. “I have enjoyed and appreciated all the advantages Power has provided to me during my tenure,” Hancock said. “The stability of our company and the team atmosphere makes this a great place to work. “Moving forward, my aim is to create a more seamless partnership with our sales department, which in turn will help our customers.” Prior to this new role, Hancock served as the general manager of credit for Power. He worked for a number of years prior to Power in the banking industry. For more information, visit powerequipco.com. 

Tim Hancock

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 25

0% FOOR 60 MONTTHS

WITH $0 DOWN*

U P T O $ 1 , 0 0 0 U S D T O W A R D S A P R O T E C T I O N PA C K A G E *

Unlike the qqualittyy and dependability p y of Cat C ® equipment, q p , this offer won’t last a lifetime. It’ss high g time yyou connect with yyour local Cat dealer for huge savings and an n unbeatable Protection Package. Good things co ome to those who wait. act now .

Serving South Carolina 3151 Charleston Hwy West Columbia, SC 1.844.252.6242

Serving Western North Carolina 9000 Statesville Rd Charlottte, NC 1.800.277.1212

Seerving Eastern North Carolina 4807 Beryl Rd Raleigh, NC 1.919.836.4462

*Offer valid from January 1, 2022 through June 30, 2022 on new compact Cat® machines sold by participatting Cat dealers to customers in the USA or Canada. Purchase must m occur during offer period. Offer subject to machine availabbility and credit approval by Cat Financial. Not all customers will qualify. Payments based on 60-month loan. The credit of up to $1,000 USD can only be applied toward the purchase of a Cat Customer Value Agreeement (CVA) and Equipment Protection Plan (EPP) that includess a minimum 2 maintenance parts kits; TA1 equipment inspectionn; Product Link®; EPP coverage; and final drive oil only for compact track loaders and mini excavators. The maintenance parts cover the first 1,000 hours (estimated 2 years) of machine utilization. The kit contaiins one set of parts for regular planned maintenance under norm mal operating conditions. In some severe applications where maaintenance parts need to be replaced more frequently, additiona al parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, S∙O∙SSM and fluids. Payments do noot include taxes, freight, set-up, deliveryy, document fees, inspections, additional options, or attachments. Offer may change without prior notice and cannot be combined with any other offerss. Additional terms and conditions may apply. Contact your Cat dealer for details. without permission. ©2022 Caterpillar. All Rights Reserved. Reserved CA ATT, CA AT TERPILLAR, ERPILLAR LET LET’S S DO THE WORK, WORK their respective logos, logos “C C Caterpillar Corporate Yeellow w,” the “Power w, Power Edge” Edge and Cat “Mode Modern ern Hex Hex” trade dress, dress as well as corporate and product identity uused herein herein, are trademarks of Caterpillar and may not be used w

Page 26 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pile Driving Under Way for New NASA Causeway Bridge Florida Department of Transportation photo

Florida Department of Transportation photo

The new bridges will create a free-flowing environment where maritime motorists will have ample space to travel the intercoastal waterway and will create a safe passageway for the transport of rockets destined for launch.

The project will prepare Florida for future growth, and also boost economic productivity and global competitiveness.

NASA from page 1

causeway, as previously drivers had to find access to their destinations in other ways. Upgrading this bridge is significant, as it solidifies central Florida as a leader in the space industry.” Interest in space exploration has continued over the past decades, and with that growth comes a need for safe and reliable access for anyone who drives on the bridge. “Replacing this bridge will support future growth and improve public and commercial mobility. Additionally, it’s more cost- effective to replace the bridge now than maintaining the bridge for another ten years and then replacing it.” According to Phillips, the new bridges will create a freeflowing environment where maritime motorists will have ample space to travel the intercoastal waterway. They will create a safe passageway for the transport of rockets destined for launch. The project will prepare Florida for future growth, and also boost economic productivity and global competitiveness. “Cape Canaveral has long been looked to as the hub of space exploration, so improvements to the payload and accessibility at the NASA Causeway helps prepare Florida for the potential of all that the space industry has to offer,” said Phillips. “As different entities seek to further the idea of space travel, FDOT is preparing Florida roads and bridges to expand and improve access to the area. “This project takes place in the heart of a tourist destination, and has had careful planning and coordination to aid both residents and visitors of this area to enjoy the benefits for generations.” To mark the start of construction, a special ceremony took place on the NASA Causeway Bridge in December 2021. “As a symbolic groundbreaking, dignitaries were invited to make a handprint in a concrete slab and sign the wet concrete with a nail,” said Phillips. “It was great for these partners to kick off construction together in an interactive and

Florida Department of Transportation photo

“During construction, we estimate that more than 95,000 cubic yards of fill materials will be brought in, and more than 53,000 cubic yards of excavation materials will be removed,” said Suzanne Phillips, FDOT operations engineer.

well-received manner. It was extra special that Lieutenant Governor Jeanette Nuñez and other elected leaders who represent this area were able to join the ceremony, as well. “Breaking ground on a project of this scale was incredibly rewarding, especially for one as innovative as this, which has so many stakeholders impacted by it. It’s an honor to be working with so many partners on a project that has ties to historic significance, and it’s even more humbling to know this project will help further our state in the new era of space exploration. “ To date, traffic shifts have been minimal to avoid creating traffic backups or congestion along the causeway. Additionally, FDOT aims to lessen impacts for motorists during construction through efforts such as working overnight and coordinating with partners, so events are planned accordingly. Phillips also noted that major projects require large amounts of material and coordination with suppliers. “Many variables affect the supply chain and can, in turn, affect the flow of the project schedule. Our teams work hard to be proactive in planning ahead, so we’re prepared for any-

thing.” Currently, pile driving is taking place, with debris and seawall removal continuing to prepare for new bridge structures. Test piles are nearly completed, and production piles have begun for the southern bridge. Demolition of the current causeway will be necessary for completion of the northern bridge. “Demolition work will involve processes like separation and removal, using heavy machinery,” said Phillips. “Due to the delicate ecosystem where the work is taking place, the contractor will use several methods to remove the existing structure and minimize debris. For separation, the contractor will employ concrete saw cutting to break down large roadway areas into pieces that can be then removed with large machinery. The demolition is scheduled to take place after the southern bridge is completed and open to the public; however, schedules are subject to change. We are still developing plans evaluating the estimated time of the demolition period.” All work being done on site is monitored closely by several teams to ensure safety of workers and motorists. Lane closures are needed to maintain a safe work environment, and traffic shifts have not created congestion or safety concerns. Required closures are closely coordinated with stakeholders, and consideration for special events is also taken into account to ensure mobility through the work zone, even during construction. There have been minimal impacts from weather, so far. However, things can change quickly, especially during hurricane season. With this long-term project, the team will remain vigilant, and adjust to any issues accordingly. Orion Marine Construction Inc. serves as the contractor for the project, which is anything but routine. “There’s a lot involved with building these bridges,” said Phillips. “Specifically, there’s planning, purchasing, coordisee NASA page 48

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 27

MADE FOR R

AMERICA A SERVICE THAT’S T

LOCAL SCHEDULE E A DEMO

TODAY

WITH A LOCAL DEALER R

Award Winning

SW405K

Page 28 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TAK AKING CONSTRUCCTION

TO THHE NEXT LEVEL. L 2.7M square feet of exhibitss / 130,000 attendees / 1,800 exhiibitors / 150 education sessions

MARCH 14-18 / 2023 / LAS VEGAS / NEVVAADA

No matter what sector of construction you’re in, you’ll leave CONEXPO-CON//A AGG with new ideas, new relationships, and new opportunities to grow your business, and your place within the industryy.. yo This isn’t just North America’s largest construction trade show w,, it’’ss taking construction to the ne ex xt le evvel.

LEARN MORE AT CONEXPOCONAGG.COM

2020 Attenddeee Missy ssy Sc Scherber e ber,, T. Scherberr Demolition & Excavatingg T.

AD CEG-04/22 - Photo credits: Sémaphore - No binding document

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 29

YUP IT’S AN

EXCAVATOR… AND A WHOLE LOT MORE!

MAKE YOUR MOVE TO MECALAC WWW.MECALAC.COM

Virginia 410-242-6500 www.mcclung-logan.com

Greater Chattanooga, Tennessee 423-541-5900 www.kubotaofchattanooga.com

Georgia 800-875-5659 www.reynoldswarren.com

Florida 813-341-4646 www.cpequipment.com

Page 30 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A Blackjack Concrete Cemen Tech “rig” pulls into another south Atlanta job site.

Cemen Tech concrete technology works well for large scale pours.

Cemen Tech Products, Technology Broaden Opportunities The purchase and use of Cemen Tech volumetric concrete mixers have been leading to new revenue streams and new retail business for many contractors. The mix design, high quality of concrete pours and the ability to “adjust on the fly” the amount of concrete used on any given project was just the recipe for Atlanta based contractors’ Blackjack Paving and Sunbelt Asphalt. The time and money savings of having a driver of a truck with a pre-determined volume and mix for each job site provides effective tracking of every single yard of concrete poured and detailed access to production data. Online scheduling and real-time dispatch communication technology of the driver helps improve the overall process. Rather than the traditional means of having a concrete mixer transport material in a rotating barrel that may be getting hot or drying while sitting in traffic, the Cemen Tech process provides concrete “on demand or on the fly.” From the psi of the pour all the way to the overall mix, all aspects of final composition and pour can be changed at any time. From the fiber to the concrete coloration to the moisture level, it’s all completely on demand, with zero waste and the customer gets exactly what they pay for — fresh, brand new concrete. Once the Cemen Tech trucks are purchased, stockpiling essentials, including 67 stone (or 89’s if needed), sand, additives, chemicals, hardeners and siloing cement dust, is the first order of business for concrete production. Blackjack Paving and Sunbelt Asphalt both utilize the Cemen Tech Accu Pour system that feeds all jobsite info directly from their offices into a driver’s iPad. The driver goes to the site, creates the mix and the quantity, and makes the pour without having to check in with anyone. At Sunbelt Asphalt based in Auburn, Ga.,

(L-R) are Blackjack Concrete’s Brad Kaufman and Jay Herzog, with the president of Reynolds Warren Equipment, Steve Meissen — their Cemen Tech dealer.

Spencer McCroskey and Mark Edgar have been using Cemen Tech products for just over three years. The need and demand for concrete pushed the purchase. Sunbelt was ordering cement two weeks in advance and just hoping it would arrive, according to McCroskey and Edgar. The decision was made to take care of themselves and produce their own cement through the purchase of Cemen Tech trucks. With its ability to produce its own concrete, the demand from other contractors pushed Sunbelt’s concrete production to more than 90 percent going to other contractors and led

to the start of one of its newest companies: Sunbelt Site-Mix. “We have three trucks, and mostly one truck stays with us while the other two go to supply our customers for outside sales. The competitive advantage is that we can easily move from area to area on a job site or from customer to customer and create a unique mix at each stop,” said Edgar. “On cold days, we can add a little more calcium or a little less water than a concrete plant for our needs at the site to compensate for weather conditions. So rather than waitsee CEMEN TECH page 34

Volumetric concrete production is perfect for quality curbing and sidewalk pours.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 31

JACKSONVILLE LOCATION

POLK CITY LOCATION

103 BRYAN STREET JACKSONVILLE, FL 32202 904-354-5746 • FAX: 904-355-1891

600 N. COMMONWEALTH AVE. POLK CITY, FL 33868 863-984-6262 • FAX: 863-984-6363

EVOLUTION SERIES Dual Pressure Model 185 CFM @ 100 PSI or 150 CFM @ 150 PSI In conjunction with the expansion of Hyundai Construction Equipment Americas’ dealer network to include three more Taylor Construction Equipment locations, Tim Gerbus (R), Taylor’s product and sales manager, joined Shaun Galligan, Hyundai CE Americas district manager – Southeast, in supporting Hyundai’s presence at World of Asphalt.

Hyundai Expands Its Dealer Network With Three New Locations Hyundai Construction Equipment Americas, which earlier this year expanded its dealer network with the addition of Taylor Construction Equipment locations in White House and Maryville, Tenn., announced the addition of three new Hyundai-authorized Taylor locations, one in Mobile, Ala., and one each in the Mississippi towns of Louisville and Philadelphia. “We are pleased to offer customers in the greater Mobile area and east central Mississippi access to Hyundai equipment through these locations,” said Shaun Galligan, Hyundai CE Americas district manager — Southeast. “Taylor is a solid leader in construction equipment, forklifts and material handling products, and they’ve already demonstrated their commitment to providing top-caliber products and ultra-responsive service.” “Taylor Construction Equipment is excited to add Hyundai Construction Equipment to our portfolio of products in our home state of Mississippi and nearby Alabama,” said Robert Taylor, president, and COO of the Taylor Group of Companies. “Hyundai Construction is a world-class brand known for its quality products and aftermarket support. When you combine Hyundai’s aftermarket support with Taylor Construction Equipment, you have a winning combination that is a true win-win for the customer.” These new locations will offer the full line of Hyundai Construction Equipment, including the compact and fullsized excavators, wheel loaders, hydraulic breakers, scraphandling solutions and other construction and specialized equipment. Taylor Construction Equipment is part of the Taylor Group of Companies, which celebrates its 95th anniversary this year. For more information, visit www.hceamericas.com. 

Electronic Inlet Valve No Regulators Adjust Pressure From Control Panel

FINANCING AVAILABLE ZERO INTEREST 12 MONTHS RENTALS, SALES, SERVICE, PARTS, COMPRESSORS, GENERATORS, LIGHT TOWERS, ABRASIVE BLASTING EQUIPMENT, DUST COLLECTORS, AIR DRYERS, DEHUMIDIFIERS, MANLIFTS

An offer e built to he elp you tak ke on the h job j bsite.

Construction Lineup

D abl Dur able Kubot b ta engine i es

U Upgr aded d d tech & feattures

Call Drew for Service & Brian for Parts.

704-233-4242 800-443-7569

Stop by fo or big savings on Kubota construction c equipment, in ncluding skid steers, track k loaders, wheel w loaders and the wo orld’s #1 selling compact e excavator for 18 years.*

DOWN

APR

FOR UP TO

Mon.-Fri. 7:30am-5:00pm Sat. 8:00am-12:00pm

MONT HS

3144 Hwy 74 East Monroe, NC 28112 www.brookssales.com

OR SA AV VE UP TO

$3,000*** VISIT US TOD DA AY A Y FOR THIS LIMITED-TIME OFFFER

KubotaUSA.com *According to 2021 data from Off-Highway Research including all Kubota Group brand sales. **Based on the 2021 Equipment Watch Awards for Highest Retained Value and 5-year residual value – Large Skid Steer Loaders. © Kubota Tr Tractor Corporation, 2022. ***$0 Down, 0% A.PP..R. financing for up to 48 months or a customer instant rebate of $3,000 is available on purchases of new Kubota SVL97-2, R640 and $2,700 on KX057 equipment from participating dealers’ in-stock inventory. Promotional rate available to qualified purchasers through Kubota Credit Corporation, U.S.A.; subject to credit approval. Example: 48 monthly payments of $20.83 per $1,000 financed. Rebates not available with 0% A.PP..R. or other promotional financing. Some exceptions apply. Offers expire 6/30/22. Terms subject to change. This material is for descriptive purposes only. Kubota disclaims all representations and warranties, express or implied, or any liability from the use of this material. For complete warranty, disclaimer, safety, incentive offer and product information, consult your Dealer or KubotaUSA.com. 2KBB03930_CE_Port_KX057_F1_4-1_0304

Page 32 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

David (D.J.) Jacob Hughes Jr. Passes Away at Age 80 David (D.J., Dave) Jacob Hughes Jr. passed away March inducted into the Mars Hill University Athletic Hall of Fame 26, 2022, in Thomasville, Ga., at the age of 80. in 2003. Mr. Hughes was the fifth child of eight children born to During his college years, a summer job cleaning service David Jacob Hughes and Viola Johnson Hughes. Along with bays for EF Craven Company (at the time the state’s oldest his siblings, he grew up in Avery County heavy equipment construction dealerin the small community of Frank, N.C. ship) led to a change in his planned career After being a single parent and attenpath of coaching and teaching. tive father for several years to his daughImmediately after graduation, he was ters, Monique and Angie, he married his hired by EF Craven Company and began high school girlfriend and love, Norma a highly successful career in sales and Ann Buchanan Hughes (aka “Pete”), to management. From 1964 to 1988, he whom he was married 31 years, and worked for EF Craven in Asheville, became father to Lisa, Fritz and Daisy. Greensboro and Knoxville. In 1988, he Mr. Hughes was a 1959 graduate of became the Asheville branch manager of Cranberry High School where he LB Smith Company and when LB Smith excelled in academics and sports. Under was acquired by ASC Volvo, he continthe mentorship of his basketball coach ued to work for them until his eventual David Odom, he earned many awards retirement in 2013. during his high school career and was During his professional career, he awarded a basketball scholarship to Mars David (D.J., Dave) Jacob Hughes cherished the numerous friends he made. Hill College (now University). He started Jr., passed away March 26, Mr. Hughes’s reputation as a businessevery basketball game for four years. 2022, in Thomasville, Ga., at the man and supervisor was best described During his junior and senior years, he age of 80. by his co-workers and clients. “D.J. was was chosen as captain and was the team’s one of a kind, a class act, a giant among leading scorer. industry associates, a wonderful friend, great mentor and a Mr. Hughes served as the very first senior class president fine man who created excellent customer service, a family in Mars Hill’s history when it transitioned from a junior col- working environment and was respected and loved by both lege to a senior institution. A Dean’s List student, he earned colleagues and customers.” a B.S. degree in Physical Education in 1964, was selected for In addition to his parents, he was predeceased by a brothWho’s Who in American Colleges and Universities and was er, Jack Hughes (Lois) and a sister, Sandra Kay Phillips

Immediately after graduation from college, Mr. Hughes was hired by EF Craven Company and began a highly successful career in sales and management.

(Clinton). He is survived by his wife, Norma Ann; children, Monique Worley (Brian), Angie Hughes, Lisa Hamm (Jeff), Fritz Roberts (Conley) and Daisy Anthony; siblings, Louise Buchanan (Vance, dec.), Mary Helen Henley (Pete), Betty Robbins (Doran), John Wayne Hughes (Jackie) and Lynda Hodges (Pat); 18 grandchildren, five great-grandchildren and a multitude of nieces and nephews. In lieu of flowers, memorial contributions may be made to the Alzheimer’s Association on the “DJ Hughes Tribute” page on Facebook, or a check may be made out to the Lions Athletic Club, Office for Institutional Advancement, Mars Hill University, P.O. Box 6792, Mars Hill, NC 28754 or online https://www.mhu.edu/athletics/lions-athletic-clubjoin/. 

Great Recession Forces Miller’s Construction to Work Smarter MILLER from page 20

PC138USLC, PC210LC, PC290LC and PC360LC excavators; four HM300 articulated trucks; and a WA270 wheel loader. Mike notes that the iMC equipment helps the company save time and money throughout the lifespan of a job. “If you’re not running an intelligent machine then you’re paying a surveyor to go out and do all of the work the machine does for you,” said Mike. “One of the most effective areas we’re able to utilize the iMC machines is creating water retention ponds. Almost every job requires one, and they’re always uniquely designed with strict tolerances. We can use the 360 to contour a slope and cut a pond to grade without over- or under-diggings. We use the 61s for mass earthmoving and getting within a couple tenths of grade. We use the 51 to dress up behind the 61s and take a job to final grade. The 51 is just as good as a motorgrader, and I say that as a longtime motorgrader operator. Together, the iMC machines can bring a pond to grade on the first try. “We’re wrapping up on 30 months at a school job site, and the ponds that we built at the beginning of the project are still exactly where they need to be,” said Mike. “We’re so confident and comfortable with the

process that we were able to hydroseed and net the pond ahead of schedule.” The Komatsu iMC equipment is also helping Miller’s Construction combat its newest challenge: a labor shortage. “A lot of our older operators have either

retired or are nearing retirement, and there aren’t many young kids with experience to replace them,” said Matt. “With the iMC machines, I can take someone without any operating experience, put them on a dozer, and they can grade as well as the retiring

Miller’s Construction Company LLC uses a fleet of Komatsu equipment to complete its projects, including a PC360LC excavator, a PC290LC excavator and an HM300 articulated truck.

operator within a couple weeks.” Finding Solutions, Not Excuses Linder Industrial Machinery Company and sales representative Tyler Halbert work closely with Mike and Matt to help Miller’s Construction find the right machines for its jobs. Mike notes that during the COVID-19 pandemic, dealer support has been key to the company’s success. “COVID has created lots of supply chain problems where it’s challenging to find parts,” said Mike. “Linder and Tyler didn’t make any excuses — they found solutions to keep us running. “Product support is important to any organization, and Linder’s support of our company beats anybody else out there,” said Matt. “We know that we can call our sales rep and he will answer the phone or get back to us quickly. I’ve called him at 8 at night, and he always responds.” Miller’s Construction relies on Linder’s technicians to service its Komatsu Tier IV equipment through Komatsu Care, a factoryscheduled maintenance program for three years or 2,000 hours. “The technicians notify us when a machine is due for maintenance and plan see MILLER page 70

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 33

$2.7B Brightline Plan Includes New Rail Bridge in Jupiter, Fla. A modern railroad drawbridge is planned to be erected soon spanning the Loxahatchee River in Jupiter, Fla., for Brightline, the company currently building a high-speed rail line to run between Miami and Orlando International Airport. The drawbridge’s construction is to begin April 10, and when work is finished on placing its components in late May, a critical piece of Brightline’s $2.7 billion Orlando expansion will be completed, the company said in an April 5 press release. The new structure will replace the current drawbridge, built in 1926, and provide improved reliability and efficiency to the crossing, which carries trains across a popular navigation channel in Palm Beach County. An Important Brightline Crossing Point As one of two movable bridge structures on Brightline’s Orlando expansion project, the Jupiter drawbridge is a key connection between south Florida and central Florida. Due to the type of construction work and necessary safety precautions, installation of the new drawbridge will require a temporary closure of the river channel, located just west of the Atlantic Ocean, and limiting boats

from traveling freely between the river and to prepare it for high-speed passenger rail. finished by the end of 2022, the company the Jupiter Inlet and Intracoastal Waterway This new structure is another important told the Palm Beach Post, with passenger rail over a seven-week period in April and May. example of the significant investment service projected to start in early 2023. In addition, Brightline also is rehabbing Brightline is making to improve Florida’s the entire 583-ft.-long Loxahatchee River transportation infrastructure.” Bridge Components to Be bridge with full replacement of its Floated to Work Site electrical system and operating Building the new Loxahatchee machinery as well as installing a River drawbridge will require multiple second track. barges and cranes in the navigation Once the bridge is completed, channel, Brightline said in its release. boaters will see the benefits it is “The Loxahatchee River bridge Plans call for the structure’s pieces to designed to provide, Brightline be loaded onto barges and floated into noted in its release, including represents one of the more place, blocking the waterway from improved dependability of bridge boat traffic. openings and closings, and added complex construction projects At the beginning and end of the 52clearance for small watercraft. For along our Orlando extension.” day project, no boat traffic will be instance, at its south end, the bridge allowed to pass, and freight traffic will is to get a new small-craft navigabe briefly suspended. During the sixtion span that will increase its verMichael Cegelis week work period in between, the temtical clearance by 14 ft. and allow porary span for the railroad bridge will Brightline more vessels to pass without the be lifted out twice daily to accommoneed to open the drawbridge. date the busy waterway and let boats “The Loxahatchee River bridge pass. represents one of the more comBrightline’s bridge work is being plex construction projects along coordinated with the U.S. Coast Guard our Orlando extension,” explained Michael Scott Bridge Company, headquartered in (USCG), the Jupiter Inlet District, the Cegelis, executive vice president of Rail Opelika, Ala., was selected as the contractor Florida East Coast Railway, and local Infrastructure and Development for for the drawbridge replacement project. municipalities. The clearance improvement Brightline. “Considerable work was Brightline’s expansion of higher speed project also is made in collaboration with the required on the nearly 100-year-old structure trains between Miami and Orlando will be Jupiter Inlet District. 

Page 34 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Blackjack Paving, Sunbelt Asphalt Rely On Cemen Tech CEMEN TECH from page 30

ing hours and hours for concrete to dry, we can adjust the drying time by changing the contents of the mixture,” McCroskey said. “If one of our local counties or municipalities needs a couple yards for a night job. We can easily accommodate them by going to a site without them having to fire up a concrete plant in the middle of the night for an emergency concrete job,” Edgar added. “We’re paving people. It only took a couple of months [but] with these trucks now we’re concrete people too. It’s the easiest business to get into. It doesn’t require a lot of extra employees and is profitable in a short amount of time. These trucks pretty much paid for themselves within the first year of ownership,” Edgar said. At Blackjack Paving based in Fairburn, Ga., Brad Kaufman and Jay Herzog have been quite successful with their Cemen Tech purchases. So much so, that they now own four Cemen Tech trucks and have created a subsidiary company, Blackjack Concrete — all in less than one year. “The true benefit of the volumetric truck is that it makes the exact amount of concrete you need,” Kaufman said. “Let’s say you need an extra yard or two that wasn’t in the original order; we can make it while we’re there. When most contractors need 3 yards of concrete sent in a conventional concrete truck, to ensure they have enough for the job they’re ordering as much as 4 to 7 yards. They’re paying for the extra amount that probably won’t be used.” “These trucks are essentially a concrete plant on wheels,” Herzog said. “For larger pours, if we do something like an entire sub-

Blackjack’s Joseph Trautner sets the mix and begins the pour.

division or anything on a larger scale, we stockpile the aggregate, the sand, have a water source, bring a mobile cement silo onsite. So, in essence, we can do a constant pour with a couple trucks and just constantly keep feeding it material for a continuous creation of concrete. “With this process, we can easily be set in place for the needs of a building contractor where we could do six to eight driveways a day for subdivision construction.”

Changing the mix “on the fly” at a job site is Sunbelt Site-Mix’s John Kaufman.

“In the past, we would have to locate and source the concrete we needed and hope that the concrete would show up when and where we requested delivery. With Cemen Tech, we control the process from start to finish,” Kaufman said. “Dealer support from Reynolds Warren has been fabulous. We decided to move forward with these purchases because of their support and then these products sold themselves,” Herzog said. “We did this because

Two Cemen Tech trucks work in tandem at a huge job site in Barrow County, Georgia.

of the Sunbelt Asphalt team. They’ve always been kind of a business partner of ours. They’re on the north side of Atlanta, we’re on the south side and we help each other out. We support each other through information sharing and logistical support in our service areas. They’ve been running Cemen Tech trucks for several years and they motivated us by showing how great of a revenue stream this can be for us. It was just a good business decision.”  CEG

Sunbelt Site-Mix’s Mark Edgar (L) and Spencer McCroskey oversee a massive job site in the northeast Atlanta suburbs.

Paving

SECTION

Pages 35-51

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

World of Asphalt, AGG1 Break Records at Show

The Hyundai booth featured the HL 980A wheel loader and HX220AL excavator. (L-R) are Tyler Anderson, Susan Philpott and Shawn Galligan, all of Hyundai, and Tim Gerbus of Taylor Construction Equipment.

(L-R): Marco Trentini, Valter Carlesso, Filippo D’Addato, Rick Cohen and Frederica Vanti, all of CAMS.

sphalt paving and aggregates professionals filled in a sold-out Music City Center exhibition floor in Nashville as World of Asphalt’s 20th Anniversary and AGG1 brought the industry back together. Organizations from across the country to view specialized exhibits and product unveilings, take in the latest education offerings, learn about the latest innovations in the asphalt and aggregates industries and make purchasing decisions. Running March 29 to 31, 2022, this year marked the fourth return of World of Asphalt to Nashville, and the largest iteration of the

Wirtgen introduced this W120Fi milling machine. It features excellent comfort and visibility and in the automatic mode, the Mill Assist machine control system always selects the operating strategy with the best balance between performance and costs.

(L-R): Brodie Hutchins of Wirtgen Group in Antioch, Tenn., catches up with Mark Romer and Terry Thomas, both of James River Equipment, which recently expanded its coverage of Wirtgen products to include North Carolina.

Mauldin Paving Products displayed its M415XT Maintainer, which features a 10-ft. moldboard, 3/4 cu.yd. bucket, an 840-in. scarifier and more. (L-R) are Zach Lincolnhol of Calder Brothers and Cooper and Sam Patterson of Sam Patterson Inc.

show in the Music City ever, with more than 440 companies spread across more than 193,000 net sq. ft. of the Music City Center. “We’re so proud of the teams that came together to put this event together after the longest hiatus in its history,” said Brittany Weltcheff, show manager of World of Asphalt. “As a result, we were able to bring together more than a record-breaking 11,400 asphalt paving and aggregates professionals to learn, experience everything that’s new and important in our industries and make more than 30,000 connections.” Audrey Copeland, president and CEO of NAPA, majority-owner of

World of Asphalt, echoed Weltcheff’s comments. “The last time World of Asphalt and AGG1 came to Nashville, in 2016, we sold approximately 150,000 net square feet of space in the Music City Center,” said Copeland. “The fact that we were able to use every single square foot of exhibit space the Music City Center had to offer this time, while safely bringing the manufacturers and end users together, speaks volumes about the strength of the asphalt paving industry.” “The record-breaking attendance at this AGG1 Academy & Expo and the co-located World of see ASPHALT page 38

(L-R): Visiting the LeeBoy display with the 8520B paver are Giles Poulson and Bill Smith, both of Faris Machinery in Commerce City, Colo.; and Jim Harkins, Brian Bieler and Bryce Davis, all of LeeBoy in Lincolnton, N.C.

Page 36 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Products shown with optional equipment.

MAULDIN Paving g Products... MASTERS S OF THE MA AT T! Contact your MAULDIN N dealership today to see the newly redesigned M415XT! For more information visit us at www.4aMauldin.com.

Richmond Machinery & Equipment Company

Hills Machinery www.hillsmachinery.com

www.richmondmachinery.com

NORTH CAROLINA 2901 Manufacturers Rd. Greensboro, NC 27406 (336) 308-3045 (888) 436-5088

415 Belvoir Hwy. Greenville, NC 27834 (252) 752-7145

1501 Hedingham Blvd. Raleigh, NC 27604 (919) 746-7938

11717 Reames Road Charlotte, NC 28269 (704) 208-5564

SOUTH CAROLINA 1014 Atlas Way Columbia, SC 29209 (803) 658-0200

7168B Cross County Road North Charleston, SC 29418 (843) 225-9377

11 Dixie Circle Greenville, SC 29605 (864) 546-5208

5481 Old Haywood Rd. Mills River, NC 28759 (828) 820-5265

1701 Roseneath Road Richmond, VA 23230 (804) 359-4048

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 37

Roads must be built. Worlds must be connected. DOUBLE DRUM OSCILLATION & HIGH FREQUENCY

DURABLE EASY TO USE

GSE - Great Southern Equipment Company www.gsequipment.net

Tampa, FL 866/586-8956 Pompano Beach, FL 954/327-8808 Ft. Myers, FL 239/334-6063

Tallahassee, FL 850/574-0892 Orlando, FL 407/859-9160 Jacksonville, FL 904/268-4400

Reynolds-Warren Equipment Company www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 800/875-5659 404/361-1593

www.sakaiamerica.com (800) 323-0535

Page 38 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Asphalt Paving, Aggregate Industries Meet in Nashville for Sold-Out Event ASPHALT from page 35

Asphalt shows the enthusiasm of the aggregates industry to be back in-person again,” said National Stone, Sand and Gravel Association President & CEO Michael Johnson. “Each day, the tradeshow floor and educational opportunities have been fully attended. We are thrilled to provide this top-notch experience for our exhibitors and attendees as we return to fully in-person events.” Education at both World of Asphalt’s People, Plants and Paving Conference and the AGG1 Academy broke records as well. The two most popular sessions were “Compaction 101: Doing the Right Things the Right Way” and “Best

Practices for Residential and Commercial Paving.” “The networking opportunities at World of Asphalt are invaluable for attendees and fellow exhibitors,” said Kevin Kelly, NAPA lifetime member and 2022 chair of World of Asphalt. “We pride ourselves on being able to provide the kinds of connections to our members that help them grow their businesses and careers, and those connections can only come at events like World of Asphalt.” Bill Stanley of Danbury, Conn.based American Pavement Specialists, and one of the producers of the Raised on Blacktop social media world, said meeting people in the industry and discovering new products and ideas are

the best things about World of Asphalt. “World of Asphalt is the largest network tool you can find in the pavement industry,” said Stanley. “If anyone wants to learn about asphalt, or wants to grow their paving company, whether you’re talking asphalt, roads, dirt, or you’re talking about finding a chemical that works for you, this show pays for itself.” World of Asphalt will return to Nashville and the Music City Center March 25-27, 2024.  CEG (All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.) see ASPHALT page 40

Blanchard Machinery blanchardMachinery.com/paving Columbia,SC 803-791-7100 Florence,SC 843-678-8520 Rock Hill,SC 803-324-9600 Simpsonville,SC 864-963-3645 Myrtle Beach,SC 843-399-2074 Summerville,SC 843-871-2000 Hilton Head,SC 843-784-6766

Kelly Tractor kellytractor.com Miami, FL 305-592-5360 Davie, FL 954-581-8181 West Palm Beach, FL 561-683-1231 Clewiston, FL 863-983-8177 Ft. Myers, FL 239-693-9233

Gregory Poole Equipment Company gregorypoole.com Fayetteville, NC 910-424-4400 Mebane, NC 919-568-7500 Raleigh, NC 919-828-0641 Washington, NC 252-946-1081 Wilmington, NC 910-371-6301

Weiler and Caterpillar had big displays at World of Asphalt.

Kyle Neisen (L) of Astec and Brad Pitlik of Pitlik & Wick Inc. in Eagle River, Wis., stand with the Astec Shuttle Buggy 3000 material transfer vehicle (MTV).

Carolina Cat carolinacat.com Charlotte, NC 704-596-6700 Asheville, NC 828-251-2500 Greensboro, NC 336-294-5240 Hickory, NC 828-464-7045 Monroe, NC 704-292-1555 Boone, NC 828-268-9992

The Bomag CR1030T paver features an improved operator experience. The Bomag 10-ft. tracked pavers now include an upgraded platform and better sound insulation for a better operator experience. Dual, swingout operator stations feature the Bomag SIDEVIEW innovation so the seat and console both swivel outward at four differing angles for unobstructed views.

Volvo had several of its excavator, wheel loader and artic hauler simulators on hand for guests to try out.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 39

The work may be under your feet, but you’re looking ahead - to the next challenge and the next deadline. Your local Cat Dealer

Built to Exceed the Demands of the Commercial Paving Contractor

WE’RE RIGHT THERE WITH YOU Ring Power

Yancey Bros. Co.

Thompson Tractor Company

ringpower.com

yanceybros.com

thompsontractor.com

St. Augustine, FL 904-737-7730 Brooksville, FL 352-796-4978 Daytona Beach, FL 386-947-3363 Gainesville, FL 352-371-9983 Jacksonville, FL 904-714-2600 Lake City, FL 386-755-3997 Lakeland, FL 863-606-0512

Ocala, FL 352-732-2800 Orlando, FL 407-855-6195 Palm Bay, FL 321-952-3001 Sarasota, FL 941-359-6000 Tallahassee, FL 850-562-2121 Tampa, FL 813-671-3700

Austell, GA 800-282-1562 Albany, GA 800-768-2892 Augusta, GA 800-446-5131 Bloomingdale, GA 800-482-1144 Brunswick, GA 800-299-5010 Calhoun, GA 800-752-9804

Columbus, GA 800-633-5240 Dacula, GA 800-545-2945 Macon, GA 800-633-5180 McDonough, GA 888-926-2392 Savannah, GA 800-755-8382 Statesboro, GA 888-764-6506

Valdosta, GA 800-755-6841 Washington, GA 888-678-3211 Waycross, GA 888-948-2443

Alabaster, AL 205-664-4833 Attalla, AL 256-570-1100 Tarrant, AL 205-841-8601 Crestview, FL 850-682-6510 Tanner, AL 256-353-7721 Dothan, AL 334-671-1040

Hanceville, AL 205-283-0128 Huntsville, AL 256-532-1776 Spanish Fort, AL 251-626-5100 Montgomery, AL 334-215-5000 Opelika, AL 334-749-3359 Oxford, AL 256-831-4104

Panama City, FL 850-785-4007 Pensacola, FL 850-471-6700 Thomasville, AL 334-636-0420 Tuscaloosa, AL 205-247-2800 Tuscumbia, AL 256-381-2771

Page 40 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Compaction, Best Practices Sessions Invaluable to World of Asphalt Attendees ASPHALT from page 38

see ASPHALT page 44

Stopping by the Construction Equipment Guide (CEG) booth with Teddy McKeon (C) of CEG, (L-R) are Rick and Richard Sowers of Sowers Construction Company in Mt. Airy, N.C.; and Richard Luck and John Legore, both of Luck Companies in Richmond, Va.

Sue Sasse represented Nouryon, which is a provider of optimized local solutions to the asphalt industry worldwide.

The Dynapac D30T paver with “Patriot Package” is a highway class paver featuring low cost of ownership and high quality results. (L-R) are Tito Alvarado and Jennifer Bishop, both of Dynapac in Fort Mill, S.C.; Jake Dupree and James Kelly, both of CW Matthews in Atlanta; and Adam Cope of Reynolds Warren in Atlanta.

(844) 4 MY DOBBS www.dobbsequipment.com 2730 Falkenburg Road HQ Riverview, FL 33578 (813) 620-1000 4343 Northwest 77th Ave Miami, FL 33166 (305) 592-5740 3933 Martin Luther King, Jr. Blvd West Palm Beach, FL 33404 (561) 848-6618 4333 North John Young Pkwy Orlando, FL 32804 (407) 299-1212 3005 Hanson Street Fort Myers, FL 33916 (239) 334-3627 4618 Scarborough Drive Lutz, FL 33559 (813) 995-0841 1730 N. Nova Road Holly Hill, FL 32117 (407) 299-1212 2710 Falkenburg Road Riverview, FL 33578 (813) 621-4902 - Parts 1751 Copans Road, Unit 8 Pompano Beach, FL 33064 (954) 977-9541 - Parts 6265 E Sawgrass Road Sarasota, FL 34240 (941) 960-2004 - Parts

www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 (912) 445-2880

www.richmondmachinery.com 1701 Roseneath Rd. Richmond, VA 23230 (804) 359-4048

Merrick Lane of Pine Bluff Sand & Gravel in Nashville, Tenn., checked out the Liebherr excavators and wheel loaders.

Dena Jenkins of Bomag explains her company’s partnership with Construction Angels, an organization that helps families who lost a family member due to a construction site fatality. For more information, visit www.ConstructionAngles.US.

Eric Booth, product training and marketing manager of Sakai, Adairsville, Ga., is ready to discuss the newest safety features from Sakai inclusing the auto brake assist system and Guardman safety system.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 41

Pa aving the way for “the nexxt gen neration t ”

Introducing th he LeeBoy 8520 Raised on Blacktop Special Edition Paver a . Equipped with an extensive x list of custom features. Learn More: LeeBoy.com/Raise edonBlacktop8520

Avvailable in USA & Canada. Mock-up model sh hown.

www.powerequipco.com

www.tec1943.com 150 Piper Lane Alabaster, AL 35007 (205) 621-2489

243 South Jackson St. Grove Hill, AL 36451 (251) 275-4158

309 Hamric Drive West Oxford, AL 36203 (256) 831-2440

5336 Messer-Airport Hwy Birmingham, AL 35212 (205) 591-2131

108 Skylab Drive NW Huntsville, AL 35806 (256) 851-2222

3820 Greensboro Ave. Tuscaloosa, AL 35405 (205) 752-0621

800 Church St. N.E. Decatur, AL 35601 (256) 355-0305

2100 East I-65 Service Rd. North Mobile, AL 36617 (251) 457-8991

3305 Highway 77 Panama City, FL 32405 (850) 763-4654

4307 Reeves Street Highway 431 North Dothan, AL 36303 (334) 678-1832

3285 Selma Highway Montgomery, AL 36108 (334) 288-6580

9036 Pine Forest Rd. Pensacola, FL 32534 (850) 505-0550

3300 Dozer Lane Knoxville, TN 37920 (HQ) (865) 577-5563

beardequipment.com 7566 W. Tennessee St. Tallahassee, FL 32304 (850) 575-5600

4295 Bonny Oaks Drive Chattanooga, TN 37406 (423) 894-1870

3033 US Hwy 27 E. Perry, FL 32348 (850) 584-9200

1487 Rock Springs Road Kingsport, TN 37664 (423) 349-6111

2578 SE Baya Drive Lake City, FL 32025 (386) 752-9544

320 Waldron Rd. LaVergne, TN 37086 (615) 213-0900

6870 Phillips Highway Jacksonville, FL 32216 (904) 296-5000

3050 Ferrell Park Cove Memphis, TN 38116-3502 (901) 346-9800

356 N. Hwy 17 Palatka, FL 32177 (386) 326-6268

1545 Highway 45 Saltillo, MS 38866 (662) 869-0283

4539 NW 44th Avenue Ocala, FL 34482 (352) 732-4646

Page 42 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

MECO PALM BEACH 1449 Jupiter Park Drive Suite 22 Jupiter, FL (561) 877-0513

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 43

/.-,+*)('&%$#-."! $$# &% $ #% # #" # # # # #

South Carolina 844.25 52.6242 Blanch hardMachinery.com/paving

Southern Flo orida 305.592.536 305 592 536 60 KellyTractorr.com

Western North Carrolina 336.323.5375 paving CarolinaCat.com/p

Eastern North Carolina 800.451.7278 GregoryPoole.com/paving

North and Central Florida 904 904.737.7730 737 7730 RingPower.com/paving

Page 44 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Latest Equipment, Newest Technology On Display at World of Asphalt, AGG1 ASPHALT from page 40

beardequipment.com 7566 W. Tennessee St. Tallahassee, FL 32304 (850) 575-5600 3033 US Hwy 27 E. Perry, FL 32348 (850) 584-9200 2578 SE Baya Drive Lake City, FL 32025 (386) 752-9544 6870 Phillips Highway Jacksonville, FL 32216 (904) 296-5000 356 N. Hwy 17 Palatka, FL 32177 (386) 326-6268 4539 NW 44th Avenue Ocala, FL 34482 (352) 732-4646

At the show, John Keeney discussed the new FAE USA STC/SSL stone crushers for skid steer loaders. Nathaniel Waldschmidt (in operator’s seat), product manager-excavators, and Rob Manthei, both of Case, discuss the DV45E E Series compact DV vibratory rollers. www.reynoldswarren.com 1945 Forest Parkway Lake City, GA 30260 (800) 875-5659 (404) 361-1593 180 Thunderbird Drive Richmond Hill, GA 31324 (912) 445-2880

Representing Thor Global and its line of telescopic Radial Stackers are Glenn Bowles and Chanelle Pinto. Jeff Martin Auctioneers had Keith Willette (L), territory sales representative, and Robbie Angel, national account sales manager, work the show.

Casin Swann (L) and Caleb Swann of Pavement Restorations Inc. in Milan, Tenn., check out a Cummins engine.

(L-R): Clayton Michael-Butler, Beau Waldrup and Cole Walker, all of Thunder Creek, Pella Iowa, stand aside the MTT 690, which is a 690-gal. fuel and service trailer that can be towed by anyone with a standard driver’s license.

www.richmondmachinery.com 1701 Roseneath Rd. Richmond, VA 23230 (804) 359-4048

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 45

(844) 4 MY DOBBS www.dobbsequipment.com

www.tec1943.com 150 Piper Lane Alabaster, AL 35007 (205) 621-2489

243 South Jackson St. Grove Hill, AL 36451 (251) 275-4158

309 Hamric Drive West Oxford, AL 36203 (256) 831-2440

5336 Messer-Airport Hwy Birmingham, AL 35212 (205) 591-2131

108 Skylab Drive NW Huntsville, AL 35806 (256) 851-2222

3820 Greensboro Ave. Tuscaloosa, AL 35405 (205) 752-0621

800 Church St. N.E. Decatur, AL 35601 (256) 355-0305

2100 East I-65 Service Rd. North Mobile, AL 36617 (251) 457-8991

3305 Highway 77 Panama City, FL 32405 (850) 763-4654

4307 Reeves Street Highway 431 North Dothan, AL 36303 (334) 678-1832

3285 Selma Highway Montgomery, AL 36108 (334) 288-6580

9036 Pine Forest Rd. Pensacola, FL 32534 (850) 505-0550

2730 Falkenburg Road HQ Riverview, FL 33578 (813) 620-1000 4343 Northwest 77th Ave Miami, FL 33166 (305) 592-5740 3933 Martin Luther King, Jr. Blvd West Palm Beach, FL 33404 (561) 848-6618 4333 North John Young Pkwy Orlando, FL 32804 (407) 299-1212 3005 Hanson Street Fort Myers, FL 33916 (239) 334-3627

4618 Scarborough Drive Lutz, FL 33559 (813) 995-0841 1730 N. Nova Road Holly Hill, FL 32117 (407) 299-1212 2710 Falkenburg Road Riverview, FL 33578 (813) 621-4902 - Parts 1751 Copans Road, Unit 8 Pompano Beach, FL 33064 (954) 977-9541 - Parts 6265 E Sawgrass Road Sarasota, FL 34240 (941) 960-2004 - Parts

Page 46 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Do-It-Yourself Repair Order Could Benefit Industry Machinery manufacturers beg to differ.

DIY from page 1

by extension so would construction equipment owners. The order has met with some opposition from equipment manufacturers and distributors. Specifically, it urges the Federal Trade Commission to exercise statutory rulemaking authority to address anti-competitive restrictions on third-party repair or selfrepair of items, “such as the restrictions imposed by powerful manufacturers that prevent farmers from repairing their own equipment.” Biden believes that more often than not if you own a product, from a smartphone to a tractor, these days “you don’t have the freedom to choose how or where to repair that item you purchased.” At least two members of Congress feel the same. The Agricultural Right to Repair act, introduced by Senator Jon Tester of Montana, would give farmers the right to DIY. Under it, parts, tools, software and documents would be made available to machine owners to repair, diagnose and maintain their equipment. It was written with two guarantees: that parts are replaceable with commonly available tools or that special tools are provided to owners under fair and reasonable terms. Permission to DIY Under Tester’s proposal, copyrights and patents would be part of the public domain once a manufacturer ceases to produce documentation, parts, software or tools for a particular machine. Tester, a farmer himself, claimed to have seen firsthand “the unfair practices” of equipment manufacturers that “make it harder and harder for folks to work on their tractors themselves — forcing them to go to an authorized mechanic and pay an arm and a leg for necessary repairs.” He believes manufacturers have prevent-

The FTC will enforce policy limiting anti-competitive practices which it believes can significantly raise costs for consumers.

ed producers from fixing their own machines in order to bolster corporate profits. “They’ve done it at the expense of family farmers and ranchers, who work hard every day to harvest the food that feeds families across the country,” he said. “Farmers operate in tight windows and on tight margins, and they simply can’t afford to waste time or money bringing their equipment to dealer-authorized mechanics in the middle of a season. They need to be able to repair their own equipment, and this legislation will secure them that right.” Congressman Bobby Rush of Illinois introduced the Right to Equitable and Professional Auto Industry Repair (REPAIR) Act. Similar to Tester’s bill, it targets the automotive industry on behalf of consumers. While the issue affects many equipment sectors, it is believed the ag industry has faced a hardship from an increasingly con-

Heavy machinery manufacturers are concerned that with the right to repair end users and third-party repair shops would have access to back-end source code and the ability to reset safety features, reprogram controls or change emission and safety settings.

centrated, less competitive — and more expensive market. The White House believes heavy machinery manufacturers have developed such sophisticated repair tools, software and diagnostics that farmers and construction equipment owners are prevented from repairing their own equipment. These proprietary elements force owners to pay dealer rates for repairs the end user or a third party could do the work much cheaper, believes the Biden team. The FTC voted last summer to adopt the order, saying it would target repair restrictions that violate antitrust laws. “These types of restrictions can significantly raise costs for consumers, stifle innovation,” aid Lina M. Khan, FTC chair. They also “close off business opportunity for independent repair shops, create unnecessary electronic waste, delay timely repairs and undermine resiliency.”

Equipment manufacturers believe the ability to modify heavy equipment creates safety and environmental violations that pose an inherent risk to those who operate, repair and sell it.

The Perils of DIY The Association of Equipment Manufacturers (AEM) maintains that its members and their dealers already work to maximize productivity and reduce downtime for machinery. “Overly-broad ‘Right-to-Repair’ legislation is not only unnecessary, it would risk the safety, durability and environmental sustainability of equipment,” according to AEM. The concern by manufacturers, such as John Deere, is that end users and third-party repair shops would have access to back-end source code “which can be used to reset safety features, reprogram control units or change settings that affect emissions and safety compliance.” The Associated Equipment Distributors (AED) issued a statement in response to Biden’s order. Brian P. McGuire, association president, said that the right-to-repair directive “is a solution in search of a problem.” He said consumers of heavy equipment can already diagnose and repair their machinery and tractors. However, they cannot alter the safety, security and environmental protections on the equipment. “AED strongly urges the FTC to consider the significant differences between repairing heavy machinery and modifying or tampering with it, as the agency ponders future action.” AED believes that because the FTC is an independent agency, the president cannot compel it to act. “Despite the executive order, it’s unclear what steps the FTC will take or even which actions the agency has the statutory authority to commence without congressional authorization,” said McGuire. AED represents companies that sell, rent, service and manufacture equipment for construction, mining, farm, energy, forestry and industrial applications. “The equipment distributed by our member companies contains sophisticated technology with complex safety and emissions features,” Daniel Fisher, AED vice president of government and external affairs, said in addressing the commission prior to the agency announcing its enforcement plans. “AED is concerned with the FTC’s plans to adopt a policy statement supporting ‘right to repair’ initiatives and the possibility of subsequent regulations as contemplated by President Biden’s recent executive order.” AED believes that a primary basis for applying these policies to the equipment industry is based on a false narrative. The claim that customers are unable to fix their machinery is misleading, the association maintains. see DIY page 70

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 47

Richmond Machinery The Paving Equipment Professionals

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 30 Years New Marathon TPS250T tack distributor, Honda gas eng, 18GPM pump, 250 gal, 5 ft spray wand w/50 ft hose, 6 ft spray bar, operator’s platform, propane burners, flushing system, electric brakes $17,950

New Marathon TPS115S tack distributor, Honda gas eng, 10GPM pump, 115 gallons, 5 ft spray wand w/50ft hose, hose reel, 80,000 BTU propane burner, flushing system - $10,300

New Marathon walk behind infrared heater, 3 ft x 3ft, 3 individual 1 ft sections, heats up very quickly, 360,000 BTU propane burner - $6,950

New Marathon KERA10 oil jacketed walk behind crack sealer, 10 gallons, full sweep agitation, propane burner with flame out protection, heated 1" discharge valve, 3” 2016 Volvo DD25B double drum vibratory roller, spring loaded squeegee - $6,900 Volvo diesel eng, 47” drums, water system - $32,000

2015 Superior DT80-K broom, Kubota diesel eng, 8 ft broom, heat & a/c, water system - $36,000

2015 Laymor Sweepmaster SM400 broom, Kubota diesel engine, water system, 8 ft broom, cab w/heat & a/c, all new tires - $36,000

2009 Warren GS84 tailgate spreader, 8 ft wide max spreading with 1 ft gates, gravity flow, operator’s platform - $3900

2007 Cat PS150C pneumatic 9 wheel roller, Cat 3054C diesel eng, hydrostatic drive, water systems - $37,000

3517 Wayne White Rd., Climax, NC 27233

1701 Roseneath Road • Richmond, VA 23230 (804) 359-4048 • www.richmondmachinery.com

Page 48 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Crews Put Six Cranes, Eight Barges to Work On NASA Causeway Bridge

Columbia, SC 803-791-7100 Florence, SC 843.678.8520

NASA from page 26

nating, constructing and executing all aspects of the project, including pile driving, concrete, steel, asphalt, striping, drainage, lighting, embankment and excavation, rubble rip rap, MSE walls, material testing and acceptance.” Utility relocations also must be considered, along with permitting, erosion control, dealing with endangered species and maintenance of traffic. Phillips said crews are excavating only where necessary, taking special care to ensure environmental needs are being met. “During construction, we estimate that more than 95,000 cubic yards of fill materials will be brought in, and more than 53,000 cubic yards of excavation materials will be removed. “Also, we estimate that more than 45,000 cubic yards of concrete will be delivered by truck, and in excess of 48,000 linear feet of beams and more than 121,000 linear feet of pile will be delivered either by truck or barge.” Equipment on the job includes a pile driving hammer capable of delivering 180,000 ft.-lbs. of energy. There also will be six cranes — four on the water and two on land, which range from 165 tons to 330 tons. Other heavy machinery includes eight barges — four for the cranes and four for material delivery and storage. A tugboat will move the barges into position, and several boats will be used to move workers and materials. Concrete and steel will be used for bridge construction. Piles and beams are manufactured off-site and shipped or trucked to the project. The new bridges should be operational by the end of

BLANCHARD MACHINERY www.blanchardmachinery.com/paving

Rock Hill, SC 803.324.9600 Simpsonville, SC 864.963.3645 Myrtle Beach, SC 843-399-2074 Summerville, SC 843.871.2001 Hilton Head, SC 843-784-6766

Florida Department of Transportation photo

Concrete and steel will be used for bridge construction. Piles and beams are manufactured off-site and shipped or trucked to the project.

2025. Phillips said watching the project slowly come to life is inspiring. “A collaboration effort is always rewarding to see, especially with projects that involve several big agencies. It will be even more exciting when the project is complete, and all agencies involved can present residents, workers and visitors with an enhanced and more reliable access route for transportation.”  CEG

GREGORY POOLE EQUIPMENT COMPANY www.gregorypoole.com Fayetteville, NC 910-424-4400 Mebane, NC 919-568-7500 Raleigh, NC 919-828-0641 Washington, NC 252-946-1081 Wilmington, NC 4910-371-6301

CAROLINA CAT www.carolinacat.com Charlotte, NC 704-596-6700 Asheville, NC 828-251-2500 Greensboro, NC 336-294-5240 Hickory, NC 828-464-7045 Monroe, NC 704-292-1555 Boone, NC 828-268-9992

Florida Department of Transportation photo

Equipment includes six cranes — four on the water and two on land, which range from 165 tons to 330 tons. Other heavy machinery includes eight barges — four for the cranes and four for material delivery and storage.

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 49

The Worldwide Leader in Concrete Paving Technology

www.gomaco.com ❘ info@gomaco.com GOMACO offers the full range of concrete slipform pavers, curb and gutter machines, trimmers, placer/spreaders, texture/cure machines and bridge/canal finishing equipment. GOMACO equipment features our exclusive and proprietary G+® control system, created in-house by our software engineers from the wants and needs of contractors paving in the field. At the heart of GOMACO equipment is our passion for concrete and our commitment to our customers. We look forward to visiting with you about your upcoming paving projects and your concrete paving equipment needs. Our worldwide distributor network and our corporate team always stand ready to serve and assist you.

STOWERS MACHINERY CORPORATION www.stowerscat.com/gomaco

YANCEY BROS. CO. www.yanceybros.com

RING POWER www.ringpower.com

Chattanooga, TN 423-698-6943

Knoxville, TN (West) 865-218-8800

Austell, GA 800-282-1562

Calhoun, GA 800-752-9804

Macon, GA 800-633-5180

Valdosta, GA 800-755-6841

St. Augustine, FL 904-737-7730

Jacksonville, FL 904-714-2600

Crossville, TN 931-484-4040

Sevierville, TN 865-595-3750

Albany, GA 800-768-2892

Columbus, GA 800-633-5240

McDonough, GA 855-901-0100

Washington, GA 888-678-3211

Brooksville, FL 352-796-4978

Lake City, FL 386-755-3997

Knoxville, TN (East) 865-546-1414

Tri-Cities, TN 423-323-0400

Augusta, GA 800-446-5131

Dacula, GA 800-545-2945

Savannah, GA 800-755-8382

Waycross, GA 888-948-2443

Daytona Beach, FL 386-947-3363

Lakeland, FL 863-606-0512

Brunswick, GA 800-299-5010

Kennesaw, GA 487-788-1773

Statesboro, GA 888-764-6506

Gainesville, FL 352-371-9983

Ocala, FL 352-732-2800

Orlando, FL 407-855-6195 Palm Bay, FL 321-952-3001 Sarasota, FL 941-359-6000

Tallahassee, FL 850-562-2121 Tampa, FL 813-671-3700

Page 50 • April 20, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

RICHMOND MACHINERY & EQUIPMENT www.richmondmachinery.com Richmond, VA 804-359-4048 800-662-6485

r o l l w i th th e l e ad a er s . When y p g q y p ,y g y all jobs big and small. Industry-ex y clusive technologies lik ke our 8-amplitude drums and the real-time density vallues of Compact Assist s with Density Direct™ mak m e remarkable precision an a everyday occurrence. Contact your nearest Volvo Construction Equipment de ealer location and start boostting your productivity and pro ofits today.

Trimble Offers Horizontal Steering Control for Compactors Trimble announced horizontal steersafety and deliver a higher quality, ing control functionality on the more consistent surface.” Earthworks Grade Control Platform for soil compactors, an automatic steering Trimble Automatic control solution for soil compactors — Steering Technology and the next step towards Trimble’s Trimble Earthworks uses the autonomous vision. NavController III steering technology Horizontal steering control helps from the Trimble agriculture division, operators achieve higher quality surleveraging the company’s 20 years of faces and consistent compaction. steering technology and applying it to Compatibility with all soil compactor civil construction applications. In 2020, makes and models enables contractors Trimble also introduced horizontal with mixed fleets to achieve a faster steering control as part of the Trimble return on investment. Earthworks Grade Control Platform for Trimble Earthwork’s horizontal dozers. steering control automatically steers a Horizontal steering control for dozsoil compactor using a 3D model or ers automatically controls the machine compaction pass line. This helps to to follow any horizontal alignment such improve compaction productivity and as the back of a curb, breakline, roadquality for operators of all skill levels way centerline or bottom of slope withby precisely controlling overlap out operator assistance. between passes. Trimble Earthwork’s horizontal steering control automatically steers a soil compactor using Auto steering helps reduce operator a 3D model or compaction pass line. This helps to improve compaction productivity and Availability fatigue while also minimizing over- quality for operators of all skill levels by precisely controlling overlap between passes. Trimble Earthworks Grade Control and under-compaction, providing a Platform for soil compactors with horimore consistent sub surface for a higher needs no matter where they are on their jour- materials and less durable surfaces,” said zontal steering control is available now globquality, longer lasting finished product, ney to autonomy, both now and in the future. Scott Crozier, general manager of Trimble ally through the worldwide SITECH distriIt’s difficult to steer a soil compactor with Civil Construction. according to the manufacturer. bution channel. “Horizontal steering control allows oper“We’re committed to innovation and accuracy and consistency, but over- or For more information, visit heavyindusbuilding solutions to meet our customers’ under-compaction leads to wasted time and ators to focus on machine performance and try.trimble.com/earthworks. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • April 20, 2022 • Page 51

www.PowerEquipCo.com Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283

www.tec1943.com Birmingham, AL • 205/591-2131 Pensacola, FL • 850/505-0550 Alabaster, AL • 205/621-2489 Atlanta, GA • 404/366-0693 Anniston, AL • 256/831-2440 Albany, GA • 229/435-0982 Decatur, AL • 256/355-0305 Augusta, GA • 706/798-7777 Dothan, AL • 334/678-1832 Calhoun, GA • 706/879-6200 Huntsville, AL • 256/851-2222 Columbus, GA • 706/562-1801 Mobile, AL • 251/457-8991 Hoschton, GA • 706/654-9850 Montgomery, AL • 334/288-6580 Kennesaw, GA • 678/354-5533 Tuscaloosa, AL • 205/752-0621 Macon, GA • 478/745-6891 Panama City, FL • 850/763-4654 Savannah, GA • 912/330-7500

www.dobbsequipment.com Riverview, FL (HQ) • 813-620-1000 Miami, FL • 305-592-5740 West Palm Beach, FL • 561-848-6618 Orlando, FL • 407-299-1212 Fort Myers, FL • 239-334-3627 Lutz, FL • 813-995-0841 Daytona, FL • 407-299-1212 Riverview, FL • 813-621-4902 Pompano Beach, FL • 954-977-9541 Sarasota, FL • 941-960-2004

beardequipment.com Jacksonville, FL • 904-296-5000 Palatka, FL • 386-325-6268 Lake City, FL • 386-752-9544 Ocala, FL • 352-732-4646 Perry, FL • 850-584-9200 Tallahassee, FL • 850-575-5600

Page 52 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 54 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

see CHART page 56

AMODEL

RATED OPERATING CAPACITY LBS. (KG)

CATERPILLAR

ENGINE POWER HP (KW)

OPERATING WIDTH IN. (CM)

MODEL

1,550 (705) 1,900 (865) 1,800 (820) 2,200 (1,000) 2,200 (1,000) 2,700 (1,225) 3,450 (1,570) 3,700 (1,680) 1,530 (695) 1,740 (790) 2,010 (915) 2,220 (1,010) 2,890 (1,315) 3,480 (1,580) 3,560 (1,615) 4,340 (1,969)

67 (50) 67 (50) 74 (55) 74 (55) 74 (55) 74 (55) 98 (73) 110 (82)

59 59 60 61 66 66 66 74

(150) (150) (152) (152) (168) (168) (168) (188)

/ / / / / / / /

66 66 66 66 72 72 72 76

R105 R135 GEN:2 R165 R190 R220 R260 V270 GEN:2 V330 GEN:2

(168) (168) (168) (168) (183) (183) (183) (193)

67 (50) 67 (50) 74 (55) 74 (55) 74 (55) 98 (73) 110 (82) 110 (82)

RT105 RT135 RT165 RT185 RT215 RT255 VT320

66 (168) / 69 (176) 66 (168) / 69 (176) 66 (168) / 69 (176) 78 (198) 78 (198) 76 (193) / 78 (198) 76 (193) / 78 (198) 76 (193) / 78 (198)

49 (124.5) 54 (137.2) 62 (157.5) 64 (163) 66 (168) 67 (170.2) 67 (170.2) 72 (182.9)

1,050 (476) 1,350 (614) 1,650 (748) 1,850 (839) 2,150 (975) 2,550 (1,157) 3,200 (1,452)

31.8 (23.4) 46 (34) 68.4 (50.3) 68.4 (50.3) 70.7 (52) 70.7 (52) 108 (79.4)

51 (130) 57 (145) 68 (173) 64 (163) 69 (175.3) 69 (175.3) 70 (177.8)

SKID STEERS (Rated Operating Capacity 50%) SW20 SW21 SW28 SW32

1,950 (885) 2,690 (1,220)

64 (47.7) 74.3 (55.4)

66.5 (168.9) 71.8 (182.3)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%)

MODEL

31.8 (23.4) 44.5 (33) 68.4 (50.3) 68.4 (50.3) 70.7 (52) 70.7 (52) 70.7 (52) 70.7 (52)

WACKER NEUSON

SKID STEERS (Rated Operating Capacity 50%)

SVL65-2 SVL75-2 SVL97-2

1,050 (476) 1,350 (612) 1,650 (748) 1,900 (862) 2,200 (998) 2,600 (1,179) 2,700 (1,225) 3,300 (1,497)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%)

KUBOTA SSV65 SSV75

OPERATING WIDTH IN. (CM)

SKID STEERS (Rated Operating Capacity 50%)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%) 239D3 249D3 259D3 279D3 289D3 299D3 299D3 XE 299D3 XE LM

ENGINE POWER HP (KW)

GEHL

LM = Land Management

SKID STEERS (Rated Operating Capacity 50%) 226D3 232D3 236D3 242D3 246D3 262D3 272D3 272D3 XE

RATED OPERATING CAPACITY LBS. (KG)

2,100 (953) 2,300 (1,043) 3,200 (1,451)

RATED OPERATING CAPACITY LBS. (KG)

68.4 (51) 74.3 (55.4) 96.4 (72)

ENGINE POWER HP (KW)

2,000 (907) 2,100 (952) 2,800 (1,270) 3,200 (1,451)

56 (42) 74 (55) 74 (55) 100 (75)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%)

65.2 (165.6) 65.9 (167.3) 77.2 (196)

ST31 ST45 ST50

2,170 (984) 3,150 (1,432) 3,500 (1,588)

74 (55) 74 (55) 100 (75)

65.9 (167) 65.9 (167) 72 (183) 72 (183) 67.1 (170) 78 (198) 78 (198)

OPERATING WIDTH IN. (CM)

BOBCAT SKID STEERS (Rated Operating Capacity 50%) S70 S450 S510 S590 S62 S64 S66 S76 S740 S770 S850

760 (345) 1,370 (621) 1,790 (812) 2,000 (907) 2,100 (953) 2,300 (1,043) 2,400 (1.089) 2,900 (1,315) 3,100 (1,406) 3,350 (1,520) 3,950 (1,792)

23.5 (17.5) 49 (36.5) 55 (41) 68 (50.7) 68 (50.7) 68 (50.7) 74 (55.2) 74 (55.2) 74 (55.2) 92 (68.6) 100 (74.6)

35.5 (90.2) 58.6 (148.8) 64.7 (164.3) 65.2 (165.6) 64.6 (164.1) 64.6 (164.1) 64.6 (164.1) 72.1 (183.1) 72.1 (183.1) 72.1 (183.1) 79 (200.6)

NARROW TRACK

COMPACT TRACK LOADERS (Rated Operating Capacity 35%) T450 T550 T595 T62 T64 T66 T76 T740 T770 T870 (Torsion)

1,490 (676) 2,027 (919) 2,280 (1.034) 2.150 (975) 2,300 (1,043) 2,450 (1,111) 2,900 (1.315) 3,200 (1,452) 3,475 (1.576) NA

55 (41) 68 (50.7) 70 (52.2) 68 (50.7) 68 (50.7) 74 (55.2) 74 (55.2) 74 (55.2) 92 (68.6) 100 (74.6)

OPERATING WIDTH IN. (CM) 55 (139.7) 67 (170.2) 67 (170.2) 67 (170.2) 67 (170.2) 67 (170.2) 72.9 (185.2) NA NA NA

OPERATING WIDTH IN. (CM) ROLLER OR TORSION SUSPENSION NA NA NA 72.4 (183.9) 72.4 (183.9) 72.4 (183.9) 74.3 (88.7) NA NA NA

WIDE TRACK

OPERATING WIDTH IN. (CM) NA NA NA 70.2 (178.3) 70.2 (178.3) 70.2 (178.3) 78 (198.1) 78 (198.1) 78 (198.1) NA

OPERATING WIDTH IN. (CM) ROLLER OR TORSION SUSPENSION NA NA NA 73.4 (186.4) 73.4 (186.4) 73.4 (186.4) 78 (198.1) 78 (198.1) 78 (198.1) 82.8 (210.3)

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 55

Authorized Bobcat Dealers BO BC A ATT.C O M

FLORIDA Bobcat of Jacksonville, LLC Jacksonville 904-288-9181 www.bobcatjax.com Bobcat of Palm Beach West Palm Beach 561-689-9880 www.sbequipment.com Bobcat of Broward Pompano Beach 954-763-9880 www.sbequipment.com West Palm Beach 561-689-9880 www.sbequipment.com Bobcat of Treasure Coast Fort Pierce 772-460-9998 www.sbequipment.com

GEORGIA Bobcat of Savannah Bloomingdale 912-236-5588 www.bobcatops.com

NORTH CAROLINA Bobcat of Asheville Arden 828-684-4403 www.bobcatops.com

R.S. Braswell Company Kannapolis 704-933-2269 www.rsbraswell.com

UP FOR WHA WHATE W T VER YOU’RE R UP AG GAINST

Bobcat of Charlotte Charlotte 704-343-9000 www.bobcatofcharlotte.com Bobcat of Monroe Monroe 704-289-2200 www.bobcatofmonroe.com Triangle Equipment Co., Inc. Morrisville 919-781-7910 www.ncbobcat.com Bobcat of Johnston County Garner 919-661-1833 www.ncbobcat.com Bobcat of Wilmington Wilmington 910-395-2050 www.ncbobcat.com

B o b c a t C o m p a n y i s a m e m b e r o f t h e D o o s a n G r o u p . D o o s a n i s a g l o b a l l e a d e r i n c o n s t r u c t i o n , g r o u n d s m a i n t e n a n c e a n d m a t e r i a l h a n d l i n g e q u i p m e n t , p o w e r a n d w a t e r s o l u t i o n s , a n d e n g i n e e r i n g t h a t h a s p r o u d l y s e r v e d c u s t o m e r s a n d c o mm u n i t i e s for more than a centur y. Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat C ompany in the United S tates and various other countries. ©2022 Bobcat C ompany. A ll rights reser ved. | 15 0 4

TENNESSEE

Bobcat of Clarksville Clarksville 931-436-9555 Bobcat of Nashville La Vergne 615-941-4000 www.bobcatofnashville.com

SOUTH CAROLINA Bobcat of Charleston North Charleston 843-725-6330 www.bobcatops.com Bobcat of Columbia Columbia 803-933-9996 www.bobcatops.com

Bobcat of Greenville Piedmont 864-269-3600 800-220-6266 www.bobcatops.com Bobcat of Spartanburg Spartanburg 864-342-9003 www.bobcatops.com

Bobcat of Myrtle Beach Myrtle Beach 843-236-4499 www.ncbobcat.com Bobcat of Rock Hill Rock Hill 803-670-2003 www.BobcatofRockHill.com

Page 56 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

CHART from page 54

MODEL

RATED OPERATING CAPACITY LBS. (KG)

ENGINE POWER OPERATING HP (KW) WIDTH IN. (CM)

JOHN DEERE 1,550 (704) 1,760 (799) 1,750 (795) 1,945 (883) 2,190 (994) 2,690 (1,221) 3,000 (1,362) 3,600 (1,634) 2,125 (965) 2,590 (1,176) 3,100 (1,407) 3,700 (1,680)

62.9 (1.60) 62.9 (1.60) 62.9 (1.60) 62.9 (1.60) 67 (1.70) 67 (1.70) 78 (1.98) 78.4 (1.99)

65 (48.5) 74 (54.8) 91.2 (68) 100 (74.6)

65.1 71.5 78.9 80.7

(1.65) (1.82) (20.0) (20.5)

2,300 (1,045)

72 (53)

73 (185)

MANITOU SKID STEERS (Rated Operating Capacity 50%) R R R R R R V V

1,050 (476) 1,350 (612) 1,650 (748) 1,900 (862) 2,200 (998) 2,600 (1,179) 2,700 (1,225) 3,300 (1,497)

33.1 (24.3) 44.5 (33) 68.4 (50.3) 68.4 (50.3) 70.7 (52) 70.7 (52) 70.7 (52) 70.7 (52)

48 (122) 54 (137.2) 61 (155) 64 (163) 66 (168) 66 (168) 69 (175.3) 72 (182.9)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%) 1050 1350 1650 1850 2150 2550 3200

RT RT RT RT RT RT VT

1,050 (476) 1,350 (612) 1,650 (748) 1,850 (839) 2,150 (975) 2,550 (1,157) 3,200 (1,452)

31.8 (23.4) 46 (34) 68.4 (50.3) 68.4 (50.3) 70.7 (52) 70.7 (52) 108 (79.4)

51 (130) 57 (145) 66 (168) 64 (163) 69 (175.3) 69 (175.3) 70 (177.8)

SKID STEERS (Rated Operating Capacity 50%) 1,600 (725) 1,800 (818) 2,000 (905) 2,100 (905) 2,800 (1,020) 3,400 (1,542)

60 60 67 74 74 90

(45) (45) (50) (55) (55) (67)

59.8 (151.8) 66.1 (167.8) 69.1 (175.5) 69.1 (175.5) 69.6 (176.8) 76 (193.0)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%) C327 C332 C334 C337 C345 C362

74.2 (55.3) 74.2 (55.3)

72 (182.9) 72 (182.9)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%) RT-25 RT-40 RT-50 RT-65 MAX-Series VT-70HO MAX-Series RT-75 MAX-Series RT-75HD MAX-Series RT-135 RT-135 Forestry

665 (302) 931 (422) 1400 (635) 1925 (873) 2,328 (1,056) 2,750 (1,247.4) 2,800 (1,270.1) 3,500 (1,588) 4,150 (1,882)

24.7 (18.4) 38.2 (28.5) 53.8 (40.1) 67 (49.9) 74.3 (55.4) 74 (55.2) 74 (55.2) 132 (98.4) 132 (98.4)

48 (121.9) 48.3 (122.7) 58.5 (148.6) 66 (167.6) 65.6 (166.6) 70 (177.8) 70 (177.8) 76 (193) 78 (198.1)

1,890 (857) 2,240 (1,016) 2,380 (1,079) 2,590 (1174) 3,150 (1428) 4,340 (1968)

SR160B SR175B SV185B SR210B SR240B SR270B SV280B SV340B

1,600 (726) 1,750 (790) 1,850 (840) 2,100 (953) 2,400 (1,008) 2,700 (1,224) 2,800 (1,270) 3,400 (1,545)

60 (44.7) 67 (50) 60 (44.7) 74 (55) 74 (55) 90 (67) 74 (55) 90 (67)

59.8 (151.89) 64.6 (164) 64.6 (164) 69.1 (175.5) 69.6 (176.7) 69.6 (176.7) 69.6 (176.7) 69.6 (176.7)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%) TR270B TR310B TR340B TV370B TV450B TV620B

1,890 (860) 2,170 (984) 2,380 (1,079) 2,590 (1,178) 3,150 (1,432) 4,340 (1,969)

74 (55) 74 (55) 90 (67) 74 (55) 90 (67) 114 (85)

65.9 74.3 76.0 76.0 76.0 78.3

(1.68) (1.89) (1.93) (1.93) (1.93) (1.99)

JCB SKID STEERS (Rated Operating Capacity 50%) 215 270 300 Teleskid 3TS-8W

2112 (958) 2,723 (1,235) 3,186 (1,445) 3,208 (1,455)

74 74 74 74

(55) (55) (55) (55)

66 75 75 73

(167) (190) (190) (185)

66 75 75 75 77 71

(167) (190) (190) (190) (195) (180)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%)

NEW HOLLAND L316 L318 L320 L321 L328 L334

2,600 (1,179) 3,500 (1,587)

SKID STEERS (Rated Operating Capacity 50%)

1050 1350 1650 1900 2200 2600 2700 3300

RS-75 MAX-Series VS-75 MAX-Series

CASE

LIUGONG 385B

ENGINE POWER OPERATING HP (KW) WIDTH IN. (CM)

SKID STEERS (Rated Operating Capacity 50%)

51 (37.8) 51 (37.8) 65 (48.5) 65 (48.5) 69 (51.7) 74 (55) 91 (68) 100 (74.6)

COMPACT TRACK LOADERS (Rated Operating Capacity 35%) 317G 325G 331G 333G

RATED OPERATING CAPACITY LBS. (KG)

ASV

SKID STEERS (SAE Rated Operating Capacity 50%) 312GR 314G 316GR 318G 320G 324G 330G 332G

MODEL

74 (55) 74 (55) 90 (67) 74 (55) 90 (67) 114 (85)

65.9 (167.6) 76 (193.0) 76 (193.0) 76 (193.0) 76 (193.0) 78.3 (199)

215T 270T 300T 325T Teleskid 3TS-8T Teleskid 2TS-7T

2,105 (955) 2,723 (1,235) 3,000 (1361) 3,201 (1,452) 3,695 (1,676) 2,096 (951)

74 74 74 74 74 74

(55) (55) (55) (55) (55) (55)

TAKEUCHI COMPACT TRACK LOADERS (Rated Operating Capacity 35%) TL6R TL8R2 TL10V2 TL12R2 TL12V2

1,841 (835) 2,116 (960) 2,522 (1,144) 2,975 (1,349) 4,107 (1,863)

65.2 (48.6) 74.3 (55.4) 74.3 (55.4) 111.3 (83) 111.3 (83)

60.2 (153) 65.4 (166.1) 68.5 (1740) 77.2 (196.1) 77.2 (196.1)

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 57

Alta Equipment Company www.altaequipment.com Lake City, FL 386-758-7444

THE TORO® DINGO® TXL 2000 DOES THE WORK OF SEVERAL MACHINES IN ONE. Dig below grade, reach over obstacles and extend your workiing range with the powerful telescoping arms. Enjoy 360˚ visibility from the stand-on operator platform. You can even use

Toro® Dingo® TXL 2000 WITH TELESCOPING ARMS

most skid steer and compact track loader attachments with the universal

Jacksonville, FL 904-737-6000 Tampa, FL 813-630-0077 Orlando, FL 407-850-9614 Fort Myers, FL 239-481-8554 Davie, FL 954-581-4744 Miami, FL 305-477-2442

mounting plate. Call 1-800-344-8676, option 1, to ﬁnd a dealer near you.

CCS Equipment Sales, LLC www.ccsequipment.com Raleigh - Durham 5428 Highway 96 Youngsville, NC 27596 919-375-7129 • 877-469-3471 Fuquay - Varina Angier, NC 919-935-0505 Greenville, NC Ayden, NC 28513 252-712-1033

Page 58 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 59

ALL STAR EQUIPMENT RENTALS & SALES, INC. Serving Southwest Florida 11680 Metro Parkway Fort Myers, FL 33966 888-459-7147 www.allstareq.com

B&M Equipment Rentals & Sales 2208 NW 71st Place Gainesville, FL 32653 352-336-9800 7722 SE 126th Place Belleview, FL 34420 352-245-9800 www.bmequipment.com

Lowery True Value 26407 Cortez Blvd. Brooksville, FL 34602 352-793-9083 1305 W C 48 Bushnell, FL 33513 352-793-9083 www.lowerytruevalue.com

Page 60 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

Company Wrench JCB 125 Wilsons Mills Rd. Extension Smithfield, NC 27577 855-562-3526 141 Brickyard Rd Lexington, SC 29072 866-262-4181 803-520-0032 11301 Reames Rd. Charlotte, NC 28269 980-859-4680 www.companywrench.com

Low Country JCB 1008 E Hwy 80 Pooler, GA 31322 888-431-0130 4008 Mike Padgett Hwy Augusta, GA 30906 888-431-0130 www.lowcountryjcb.com

JCB of Chattanooga 1609 Church Rd Chattanooga, TN 37421 423-899-1219 www.jcbofchattanooga.com

Deep South JCB 6851 Greenwood Road Shreveport, LA 71119 318-621-9000 340 Airport Road Jackson, MS 39208 601-939-9655 761 Choctaw Drive Baton Rouge, LA 70805 225-383-6117 8489 West Oaklawn Road Biloxi, MS 39532 888-838-5485 www.deepsouthjcb.com

Briggs JCB 2230 N US Hwy 301 Tampa, FL 33619 813-621-4671

3TS - 8W | ROC: 3,208 lb

2TS -7T | RO R C: 2,096 lb

3TS - 8T | ROC: 3,695 lb

Unique machines with endless possibilities. JC B T Teeleskids are the only skid steers and compact track loaders with a telescopic boom, allowing you to lifftt higherr,, reach ffaar ther and dig deeper than ever beffo ore. With three models to choose from, with rated operating capacities from 2,10 0 lbs to 3,70 0 lbs, you can complete tasks and access areas you wouldn’t haavve thought possible ... until now. For more inffo ormation, visit w w w.jcb.com//tteleskid or contact your local JCB dealerr.. L JCB DEALERS YOUR FAMILY OF LOCAL

1915 N Orange Blossom Tr Orlando, FL 32804 877-205-6098 6907 Broadway Ave Jacksonville, FL 32254 877-218-5638 2755 Marshall Dr Tifton, GA 31793 877-462-3250 5566 6th St. W. Lehigh Acres, FL 33971 239-458-5005 www.briggsjcb.com

/JCBNA

@J @JCBNA

JCBNA 4740

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 61

BROOKS SALES, INC. www.brookssales.com 3144 Hwy 74 East Monroe, NC 28112 704-233-4242

GROWERS EQUIPMENT CO.

LINDER TURF & TRACTOR

www.growersequipment.com

www.lindertt.com 250 North Church Street Burlington, NC 27217 336-792-3412 1501 N. Memorial Drive Greenville, NC 27834 252-695-6200 5504 15th Street E Bradenton, FL 34203 941-755-5722

2695 Davie Rd. Davie, FL 33314 954-916-1020 4801 NW 77th Avenue Miami, FL 33166 305-592-7890

MASON TRACTOR CO.

RJV KUBOTA

www.masontractorco.com 1050 Appalachian Hwy Blue Ridge, GA 30513 706-632-3777 McDonough, GA 30253 770-957-3370

www.rjvequipment.com Nashville 140 Charter Place LaVergne, TN 37086 615-793-7576 Knoxville 3356 Rudy Street Knoxville, TN 37921 865-970-2840

Cumming, GA 30040 770-887-6119 Norcross, GA 30071 770-582-0377 Villa Rica, GA 30180 678-952-2037

CROSBY EQUIPMENT JONESBORO COMPANY, INC. TRACTOR SALES INC.

TYLER EQUIPMENT CO., INC.

www.crosbyequipmentco.com www.jonesboro-tractor.com

www.tylerequipment company.com 2613 Main St. Conway, SC 29516 843-248-5294

1826 South Peterson Ave. Douglas, GA 31535 912-384-4664

5312 Stadium Blvd. Jonesboro, AR 72402 888-931-9151 870-935-9151

Page 62 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

Caterpillar Expands Cat Command for Loading to D3 Line Caterpillar announced the expansion of Cat Command for Loading to its D3-series skid steer and compact track loader line. Removing the operator from the machine, Command provides joystick-controlled remote operation of the skid steer and compact track loader models to increase safety and productivity when operating in challenging and potentially hazardous environments. Cat Command for Loading for skid steer and compact track loaders will be available in two configurations — lineof-sight operation via a lightweight console and non-line-ofsight operation via a remote Command station. By allowing the user to comfortably control the machine from a safe location, Command maintains high machine productivity in difficult operating environments such as stevedoring, industrial and waste, demolition, and site decommissioning, according to the manufacturer. A dealer-installed field kit makes any Cat D3 skid steer or compact track loader model Command-ready. The line-ofsight system includes indicator lights, wireless receiver, and antennas installed on the cabin roof with the command activation switch mounted behind a lockable door with groundlevel access. The non-line-of-sight system adds front, rear, and side cameras for 360-degree viewing and a microphone for A dealer-installed field kit makes any Cat D3 skid steer or compact track loader model Command-ready. The linesound. Since Command controls are integrated with of-sight system includes indicator lights, wireless receiver, and antennas installed on the cabin roof with the command activation switch machine electronics, users experimounted behind a lockable ence the same control response as Non line-of-sight operating is door with ground-level access. available via a remote station they would operating inside the cab, allowing for productivity to be located off-site. maintained from a distance. tions users in a familiar and comfortable seated position that simuFlexible Remote lates traditional machine control. Configurations — Console One user can connect to multiple Line-of-sight Command for machines from a single station, Loading operation comes complete controlling one machine at a time. with a lightweight, compact control The station also is compatible with console supported by a comfortother Command offerings for Cat able shoulder harness. Machine equipment, such as excavators, controls such as machine dozers and small wheel loaders. startup/shutdown, bucket Station components include rack/dump and lift/lower, rpm, machine joystick and foot pedal horn, creep control, and auxiliary controls for all the company’s hydraulic functionality are easily Command technology capable accessed through the ergonomic machines. A touchscreen mount is Command console control layout. incorporated in the station design Two different line-of-sight confor machine control, while universoles will be available to meet cussal screen mounts are included for tomer need, each providing differcamera displays of the skid steer or ent levels of functionality and concompact track loader. trol with complex hydromechaniAn emergency remote shutdown cal attachments. Operating range switch is located on the Command for both line-of-sight Command station to quickly halt all machine consoles extend up to 1,312 ft. to movements. At the job site, an allow for convenient remote operaoptional remote A-stop (all-stop) tion. switch control is available for site To ensure the user maintains personnel working around nonmachine control at all times, inteline-of-sight Command skid steer grated Cat electronics activate sevor compact track loaders. eral features to stop all machine Projected availability of movements if: the A-stop (all-stop) Command for Loading for Cat D3 switch is pressed; command stop is series skid steer and compact track loaders is third quarter of activated; wireless communication is lost; a severe fault is Customized Command Station detected; or the Command console is tilted more than 45 The non-line-of-sight Command for Loading solution 2022. For more information, visit www.cat.com.  degrees from normal operating position. includes a modular, customized Command station that posi-

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 63

Page 64 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

Stand-On Skid Steer Attachments Helping Boost Efficiency By Brant Kukuk SPECIAL TO CEG

to move the branch in one trip. Without a grapple bucket and a large skid steer, the crew would need to take time to cut the branch up into smaller pieces that could be carried by hand or pieces that would fit into a standard bucket.

Hardscape, landscape and tree care professionals are feeling the heat, and it is not because of the warmer months approaching. Trencher The increased demand for work, While dedicated trenchers are incredtighter deadlines and the industry’s ibly popular and certainly have a place ongoing labor shortage are issues many in underground construction, trencher contractors face. In fact, according to attachments offer an efficient alternathe 2021 Green Industry Benchmark tive. Report, attracting and retaining employTrencher attachments for stand-on ees is the most frequently cited issue for skid steers are typically available in 4-, landscapers with 70 percent of respon6- and 8-in. widths and are ideal for dents reporting difficulties in finding installing everything from irrigation and workers. drainage systems to utilities and fiber. While the labor shortage is enough to The biggest benefit of a trencher make any contractor sweat, many are attachment is that it eliminates the need looking to their equipment to help them for a second machine on a job site, do more with less workers. which benefits contractors dealing with One machine that is alleviating a labor shortage in two ways. First, by some of the pressure is the stand-on eliminating time needed for mainteskid steer. With its increased power, nance or transportation of a second easy maneuverability and maximum versatility, these machines are helping A grapple bucket is similar to the standard bucket, but with hydraulic clamps, so it can be machine and giving the crew valuable smaller crews stay productive, meet used to hold unstable materials such as tree branches, stumps, large boulders, unstable minutes back in their day. And second, by cutting back on training time needed deadlines and boost jobsite efficiency. bricks and other landscape materials. to learn multiple machines, which And, with the ability to effortlessly grapple bucket. enables new employees to start contributing switch out a variety of attachments, conGrapple Bucket A grapple bucket is similar to the standard to the jobsite immediately. tractors can ensure their smaller crews stay The bucket attachment is the bread and successful. butter of attachments for most stand-on skid bucket, but with hydraulic clamps, so it can Hydraulic Power Fork But with a plethora of attachments to steer operators and is the ideal attachment be used to hold unstable materials such as A hydraulic power fork is an essential choose from, it can be hard for contractors to for smaller crews. It helps operators safely tree branches, stumps, large boulders, unstaattachment for loading and unloading mateknow which attachments will maximize lift and carry large piles of material that need ble bricks and other landscape materials. For example, if a contractor needed to rial from a trailer or truck bed and moving it their ROI. Here are three stand-on skid steer to be relocated or disposed of on a job site. attachments that will help contractors mitiThere are a variety of bucket types to move a heavy tree branch across a job site, a across tricky terrain. It’s useful when movgate the pressures of the industry’s labor choose from depending on the application, grapple attachment equipped with a large ing materials like sod, bricks, trees and shortage. including a dirt bucket, 4-in-1 bucket and stand-on skid steer would allow the operator see EFFICIENCY page 66

Trencher attachments for stand-on skid steers are typically available in 4-, 6- and 8-in. widths and are ideal for installing everything from irrigation and drainage systems to utilities and fiber.

The bucket attachment helps operators safely lift and carry large piles of material that need to be relocated or disposed of on a job site.

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 65

DEMOLITION ATTACHMENTS For your Skid Steers, Compact Track Loaders & Mini Excavators deliver optimum productivity & reliability to get the job done!

HYDRAULIC HAMMERS

DEMOLITION SHEARS

NPK Welcomes New Dealer: ALL ROADS EQUIPMENT - Virginia

PLEASE CONTACT YOUR LOCAL DEALER: jamesriverequipment.com

striblingequipment.com

NORTH CAROLINA

ARKANSAS

beardequipment.com

dobbsequipment.com

Ahoskie: 252-332-5550 Asheville: 828-667-0176 Charlotte: 704-597-0211 Elizabeth City: 252-679-7590 Fayetteville: 910-424-1200 Greensboro: 336-668-2762 Greenville: 252-758-4403 Monroe: 704-220-2575 Mt. Gilead: 910-439-5653 New Bern: 252-638-5838 Raleigh: 919-772-2121 Statesville: 704-872-6411 Wilkesboro: 336-973-8201 Wilmington: 910-675-9211

ALABAMA

FLORIDA

SOUTH CAROLINA

Mobile: 800-848-8563

Fort Myers: 239-334-3627 Lutz (New Tampa): 813-995-0841 Miami: 305-592-5740 Orlando: 407-299-1212 West Palm Beach: 561-848-6618 PARTS ONLY: Pompano Beach: 954-977-9541 Riverview: 813-621-4902 Sarasota: 941-960-2004

Rock Hill: 803-325-1555

allroadsequipment.com

VIRGINIA Bealeton: 540 439-0668 Chesapeake: 540-485-2100 Chester: 804-748-6411 Fishersville: 540-887-8291 Salem: 540-380-2090

FLORIDA Freeport: 850-835-3337 Jacksonville: 904-296-5000 Lake City: 386-752-9544 Ocala: 352-732-4646 Palatka: 386-325-6268 Panama City: 850-769-4844 Pensacola: 850-476-0277 Perry: 850-584-9200 Tallahassee: 850-575-5600

borderequipment.com

flintequipco.com

GEORGIA

ALABAMA

Atlanta: 770-322-6960 Augusta: 706-737-9191 Norcross: 770-447-6622 Savannah: 912-748-2828

Dothan: 334-794-8691 Troy: 334-566-4181

SOUTH CAROLINA Andrews: 843-221-4940 Aynor: 843-358-5688 Ladson: 843-572-0400 Simpsonville: 864-963-5835 Walterboro: 843-539-1420 West Columbia: 803-794-9340

Arkadelphia: 870-246-8678 Camden: 870-574-0290 Fort Smith: 479-646-838 Jonesboro: 870-268-9900 Little Rock: 501-455-2540 Monticello: 870-367-3496 Springdale: 479-756-9779 Texarkana: 870-772-9321

MISSISSIPPI Biloxi: 228-396-2300 Brookhaven: 601-835-4400 Columbus: 662-328-0820 Hattiesburg: 601-544-3000 Jackson: 601-939-1000 Meridian: 601-482-5575 Natchez: 601-442-3613 Philadelphia: 601-656-1997 Tupelo: 662-844-3212 Winona: 662-453-7556

Tractor and Equipment

warriortractor.com

ALABAMA Graysville: 205-675-9045 Madison: 256-233-1914 Monroeville: 251-575-7111 Montgomery: 334-277-7260 Northport: 205-339-0300 Oxford: 256-831-0921 Pelham: 205-988-4474

TENNESSEE Jackson: 731-422-2542 Memphis: 901-345-5294

meadetractor.com

TENNESSEE Chattanooga: 423-855-0633 Kingsport: 423-349-5001 Knoxville: 865-546-3207 Nashville: 615-501-8600

NPK MANUFACTURES AND MARKETS THE GREATEST SELECTION OF: 0 1 5

! " # $

% & ''(')*

'( # +''!, -.-* /!!

Page 66 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

DON ALLISON EQUIPMENT, INC. www.donallisonequipment.com 233 Melville Road, Arley, AL 35541 800-669-6450 • 205-387-1600

Amid Labor Woes, Attachments Can Help Do More With Less EFFICIENCY from page 64

ornamental garden boulders. One key benefit of a hydraulic power fork for smaller crews is that operators can adjust the tines with intuitive controls on the machine, rather than having to adjust them manually. This eliminates the need for crews to get on and off the machine to adjust the tines, helping them save time and ultimately helping contractors maximize staff productivity and move from one job to the next more quickly. Attachments Up, Running Staying efficient with smaller crews means having to increasingly rely on your machines to help you stay productive. That’s why contractors are turning to stand-on skid steer attachments to help them alleviate the challenges brought on by the labor shortage. In one example, Justin Moseley, project manager of Nelson Landscaping, a landscape company based in Oklahoma City, Okla., attributes attachments as the reason why stand-on skid steers have become so invaluable to their operation. In fact, every Nelson Landscaping crew has a bucket, fork

and/or a trencher attachment on the job site. “That’s what we use on a daily basis,” Moseley said. “It’s easy to use all different attachments that we need to have. Most of our places that we go to, we’re installing the sprinkler system, we’re doing the landscaping, we’re installing these big boulders [and] decent-sized trees.” Additionally, when it comes to labor, Moseley credits the stand-on skid steer for making his crew much more productive and why it feels like they have additional crew support on the job site. “It’s doubling your work power, essentially,” he said. “It takes our labor force needs, and it almost cuts it in half.” Nelson Landscaping is just one example of an operation that is leaning on their equipment to help boost jobsite efficiency and fill staffing gaps. While the grapple bucket, trencher attachment and hydraulic fork are three of the most popular attachments to help maximize productivity, there are a variety of attachments that can help operators improve the bottom line. From rakes and backhoes to augers and microtrenchers, finding the right attachments will be imperative to keeping smaller crews successful and efficient. 

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 67

Beard Equipment Company

Dobbs Equipment

beardequipment.com

www.dobbsequipment.com

Mobile, AL 36617 251/456-1993 Pensacola, FL 32534 850/476-0277 Freeport, FL 32439 850/835-3337 Panama City, FL 32404 850/769-4844 Tallahassee, FL 32304 850/575-5600

Perry, FL 32348 850/584-9200 Jacksonville, FL 32216 904/296-5000 Lake City, FL 32025 386/752-9544 Palatka, FL 32177 386/325-6268 Ocala, FL 34482 352/732-4646

Riverview, FL (HQ) 813/620-1000

Lutz, FL 813/995-0841

Miami, FL 305/592-5740

Daytona, FL 407/299-1212

West Palm Beach, FL 561/848-6618 Orlando, FL 407/299-1212

Riverview, FL 813/621-4902 Pompano Beach, FL 954/977-9541

Fort Myers, FL 239/334-3627

Sarasota, FL 941/960-2004

Flint www.flintequipco.com 1206 Blaylock St, Albany, GA 31706 229/888-1212 Fax: 229/435-3612 Dothan, AL 36303 334/794-8691 Troy, AL 36081 334/566-4181 Adairsville, GA 30103 770/773-9857 Atlanta, GA 30336 404/691-9445

Braselton, GA 30517 770/965-1889 Brunswick, GA 31525 912/264-6161 Cuthbert GA 39840 229/732-2631 Macon, GA 31216 478/788-1586 Savannah, GA 31408 912/964-7370 Valdosta, GA 31606 229/474-6680

Aynor, SC 29511 843/358-5688 Ladson, SC 29546 843/572-0400 Walterboro, SC 29488 843/539-1420 West Columbia, SC 29169 803/794-9340

Page 68 • April 20, 2022 • www.constructionequipmentguide.com • Skid Steers, Compact Track Loaders & Attachments Section • Construction Equipment Guide

New Holland Marks 50 Years of Innovation With New C362 CTL Skid steer and track loaders have become an essential tool and necessary investment for everyday chores for many farms, landscapers and construction operations. It is also is a key part of New Holland’s brand DNA, and this year the company recognizes 50 years of innovation and leadership in this sector. To further support customer needs, New Holland Construction launches the C362, its largest and most powerful compact track loader. With 114 gross hp, a rated operating capacity of 6,200 lbs., and a breakout force of 12,900 lbs., the C362 is ready to tackle any project. “New Holland has never built a loader — wheel or track — this large or powerful, or with so much capacity as the new C362 compact track loader,” said Tyler Mills, director of New Holland Construction. “This machine redefines best-in-class performance in key areas, giving you the confidence to tackle jobs you hadn’t considered before. Customers can do more and operate longer thanks to the C362’s power, strength and stability.” Starting from the outside, the C362’s new frame design is built to last with a heavy-duty steel rear door and rear hood. Bucket cylinders are mounted on the front of the boom arms to increase ingress clearance and add even more pounds of bucket breakout force. The New Holland Super Boom vertical lift design optimizes the C362 for lift-and-carry operations. With greater dump reach and height, customers can easily load high-sided truck boxes or hoppers. Full 360-degree visibility comes with the C362’s low-profile Super Boom arm and shoulder design, an integrated rear camera, and new LED front work lights. Operators can see even more with the C362’s large glass door, lower front-door threshold and see-through area on the cab roof. No matter the job, the C362 provides maximum efficiency and safety. The low-profile undercarriage design eases cleanout, reduces noise, and increase durability. It also provides an extended track life and smoother ride due to the steel-embedded tracks rolling on the rubber instead of steel. The in-cab 8-in. LCD display gives operators a quick look at engine settings and performance information. The EZ EH custom screen settings allows for easy navigation and quick operation adjustments. The display also provides greater visibility to the rear of the loader for an efficient, safer operation. The C362 also is built with electro-hydraulic controls featuring multiple speed and sensitivity settings, including creep mode and automatic straight-line tracking. Creep mode, a slow-speed option, gives the operator greater control for slow-speed operations such as trenching and cold-planing with speed thresholds of one to 100 increments. Automatic straight-line tracking improves productivity and precision as it keeps a straight working and traveling path in uneven terrain. For regular service or maintenance, the C362 allows for easy access to the engine. The rear door and hood provide quick service entry for daily and periodic maintenance. All major service points can be accessed by tilting the cab forward. For more information, visit newholland.com. 

Construction Equipment Guide • Skid Steers, Compact Track Loaders & Attachments Section • www.constructionequipmentguide.com • April 20, 2022 • Page 69

Alta Equipment Company

Power Equipment

www.altaequipment.com

www.powerequipco.com

CCS Equipment Sales, LLC

539 SW Arrowhead Terrace • Lake City, FL 32024 386.758.7444

3300 Dozer Lane • Knoxville, TN 37920 865.577.5563

www.ccsequipment.com

www.parmantractor.com

Raleigh, Durham, Chapel Hill

8750 Philips Hwy • Jacksonville, FL 32256 904.737.6000

4295 Bonny Oaks Dr. • Chattanooga, TN 37406 423.894.1870

5428 Highway 96 • Youngsville, NC 27596 919.556.9110

3570 Dickerson Pike • Nashville, TN 37207 615.685.7800

8418 Palm River Road • Tampa, FL 33619 813.630.0077

1487 Rock Springs Rd. • Kingsport, TN 37664 423.349.6111

Fuquay-Holly Springs-Sanford-Fayetteville

9601 Boggy Creek Road • Orlando, FL 32824 407.850.9614

3050 Ferrell Park Cove • Memphis, TN 38116-3502 901.346.9800

5151 Martin Luther King Blvd. • Fort Myers, FL 33905 239.481.8554

1545 Highway 45 • Saltillo, MS 38866 662.869.0283

5210 Reese Road • Davie, FL 33314 954.581.4744

2801 W 65th Street • Little Rock, AR 72209 501-823-4400

Parman Tractor & Equipment

836 North Broad St. • Angier, NC 27501 919.935.0505 5886 Ernest Taylor Rd. • Ayden, NC 28513 252.712.1033

Atlantic Coastal Equipment Sales & Rentals

781 E Randall Wobbe Lane • Springdale, AR 72764 479-927-1672

www.acesalesandrentals.com

Ditch Witch www.ditchwitchga.com 1807 West Oakridge Drive • Albany, GA 31707 229.435-5811

922 Longwood Drive • Richmond Hill, GA 31324 912.459.1155

Page 70 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Some Firms Question If DIY Order Is Really Necessary DIY from page 46

“To the contrary, equipment manufacturers and distributors make available diagnostic tools, repair information and parts. However, consumers do not have the ability to modify the complex environmental and safety protections on the equipment,” said Fisher. AED requested that policymakers “refrain from mandating this type of unfettered access.” The association believes a broad mandate applied to the equipment industry will be detrimental to both safety and environmental compliance. “Indeed, given that customers are already able to repair their own equipment, the primary reason someone would want the ability to access and alter source code is to override emission controls and safety mechanisms to increase performance,” Fisher pointed out. “This is not fixing equipment; this is modifying it,” he added. The equipment industry has invested time and resources to meet the EPA’s Tier IV diesel emissions standards, and the right-torepair order “threatens these gains,” said Fisher, because the public could circumvent environmental protections to boost perform-

ance. Here’s another area where the order has implications for the construction industry: Modern heavy equipment has safety features to protect both equipment operators and the public while machinery is in use. “Granting access to override safety features poses undue risk on operators and bystanders while equipment is in use,” he said. AED wants policymakers to recognize that there’s a big difference between a cellphone and a backhoe. “Heavy machinery has a significantly longer life cycle that may be jeopardized by granting unfettered access to source code,” said Fisher. Equipment will often be sold to a customer, then traded-in, resold or rented when a new model is purchased. Modifications to a machine can jeopardize its durability, negatively impacting the environment when it’s considered unusable and has to be junked. “Allowing for modification would subject AED members to significant, unnecessary legal liability issues due to an end-user’s ability to tamper with machinery source code,” said Fisher. The bottom line, he said, is that end users already have the parts and info they need to

repair their machines. “The only reason for greater access contemplated by right-to-repair policies is to circumvent safety and emissions standards or to access proprietary intellectual property,” he said. The association urged the FTC “to refrain from adopting a policy statement in favor of right-to-repair, recognizing that the equipment industry’s customers do not need any additional resources to fix their machinery.” The issue is not a new one. For several years now, industry associations working together have successfully kept right-torepair mandates at the state level at bay. The Equipment Dealers Association (EDA) is also fighting the legislation on behalf of its members. “These very broad bills have been introduced in 30-plus U.S. states and lump ag and construction equipment in with consumer electronics in an effort to give end-users the right to modify equipment,” maintains the association. “Unlike cell phones, modifying heavy equipment creates safety and environmental violations that pose an inherent risk to those who operate, repair and sell it.” Deere & Co. announced in March it will make expanded repair software available to

customers. This is considered a major win for farmers who have lobbied for years for the ability to do their own mechanical work. “For more than 180 years, John Deere has empowered customers to maintain their equipment to keep it running right and minimize downtime,” the company said in announcing the software availability. “As part of that long-standing tradition, we are proud to announce that we’re enhancing the capabilities of our existing diagnostic tools and expanding their availability.” Starting in May, the diagnostic service tool, Customer Service Advisor, will be made available directly to customers and independent repair shops through JohnDeereStore.com. The tool will continue to be available through John Deere dealerships. “In 2023, we will roll out an enhanced customer solution that includes a mobile device interface, and the ability to download secure software updates directly to embedded controllers on select John Deere equipment with 4G connections.” The software unlocks “deeper system levels” to allow those with the expertise and desire to make more advanced repairs themselves, said Deere.  CEG

Miller’s Finds Solutions With Fleet of Komatsu Machines MILLER from page 32

service around our schedule,” said Mike. “That means we keep our machines in great condition and allow our mechanics to focus on other equipment. “We’re not the largest grading contractor in the area, but Linder treats us the same as somebody three times our size,” said Mike. “Linder bends over backwards to provide the support we need, and I couldn’t ask for anything more than what they offer.” Next Generation Matt’s son, Brady, is currently a junior project manager at Miller’s Construction. Brady has wanted to work for the family business since he was a kid. “I’ve seen how hard my dad and uncle work and feel like I owe it to them to keep growing the company,” said Brady. “I have a brother that’s nine years younger than me, and I hope he takes an interest in the business so that we can have the similar experience to my father and uncle working together. As I become more involved with the decision-making process, I see us moving towards more turnkey jobs and continuing to implement technology into everything we do.” “I hope to live to be my dad’s age so that I can see where Brady takes the business,” said Mike. “He has the ideas, resources and drive to grow the company. I’m excited to see where we go over the next couple of decades.” (Reprinted with permission from Construction Publications Inc. (CPI)-Linder Link Magazine.) 

A Miller’s Construction operator cuts to grade with a Komatsu D51PXi-24 intelligent Machine Control (iMC) dozer. “A lot of our older operators have either retired or are nearing retirement, and there aren’t many young kids with experience to replace them,” said Matt Miller, project manager. “With the iMC machines, I can take someone without any operating experience, put them on a dozer, and they can grade as well as the retiring operator within a couple weeks.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 71

CCS EQUIPMENT SALES

CLM EQUIPMENT CO., INC.

www.ccsequipment.com

www.clmequipment.com

Raleigh/Durham, NC • 919-556-9110 Angier, NC • 919-935-0505 Greenville, NC • 252-712-1033

Lafayette, LA • 337-837-6693 Lake Charles, LA • 337-625-5942 Houston, TX • 281-598-2500

GSE GREATImprint SOUTHERN Dealer Arrea EQUIPMENT COMPANY www.gsequipment.com Tampa, FL • 866-586-8956 Pompano Beach, FL • 954-327-8808 Ft. Myers, FL • 239-334-6063 Tallahassee, FL • 850-574-0892 Orlando, FL • 407-859-9160 Jacksonville, FL • 904-268-4400

HEAVY MACHINES INC.

LINK-BELT MID ATLANTIC

www.heavymachinesinc.com

www.link-beltmidatlantic.com

Memphis, TN • 800-432-8902 Shreveport, LA • 800-548-3458 Gray, TN • 855-201-7453 825 31st Street North Birmingham, AL 205-323-6108 • 844-344-8658

Ashland, VA • 866-955-6071 Chesapeake, VA • 800-342-3248

Page 72 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar D9G Track-Type Tractor, 1:50 scale - $225

Link Belt 490X4 Excavator, 1:50 scale - $225

Terex 33-07 Off-Highway Truck, 1:40 scale - $215

Caterpillar 983 Traxcavator, 1:50 scale - $175

Caterpillar 528 Log Skidder, 1:50 scale - $150

Poclain 160 Excavator, 1:50 scale - $140

Caterpillar 245 Excavator, 1:50 scale - $125

Caterpillar 953 Traxcavator, 1:50 scale - $125

Caterpillar 215 Excavator, 1:50 scale - $100

Caterpillar 416 Backhoe/Loader, 1:50 scale - $90

Caterpillar D4E Track-Type Tractor, 1:50 scale - $90

Case 580D Silver Backhoe/Loader, 1:35 scale - $75

Case 850D Angle Dozer, 1:35 scale - $65

Case 850B Track Loader, 1:35 scale - $65

New Holland L-555 Skid Steer Loader, 1:35 scale - $60

Caterpillar 631D Tilt Trailer, 1:70 scale - $45

Shipping and Handling Included

Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 73

bridge the technology gap guidance and payload monitoring — tools to drive accuracy and smartconstruction.mykomatsu.komatsu

LINDER INDUSTRIAL MACHINERY www.linder.com Florida Ft. Myers • 239/337-1313 Jacksonville • 904/786-6710 Ocala • 352/629-7585 Orlando • 407/849-6560 Pembroke Pines • 954/433-2800 Plant City • 813/754-2727 West Palm Beach • 561/863-0570

North Carolina Asheville • 828/681-5172 Charlotte • 980-777-8345 Greenville • 252/695-6200 High Point • 336/665-0110 Raleigh • 919/851-2030 Wilmington • 910/254-2031

South Carolina Columbia • 803/794-6150 Greer • 864/877-8962 North Charleston • 843/486-8080

POWER EQUIPMENT www.powerequipco.com Chattanooga, TN • 423/894-1870 Kingsport, TN • 423/349-6111 Knoxville, TN • 865/577-5563 LaVergne, TN • 615/213-0900 Memphis, TN • 901/346-9800 Saltillo, MS • 662/869-0283 Little Rock, AR • 501/823-4400 Springdale, AR • 479/927-1672

TRACTOR & EQUIPMENT COMPANY www.tec1943.com Alabama Alabaster • 205/621-2489 Anniston • 256/831-2440 Birmingham • 205/591-2131 Decatur • 256/355-0305 Dothan • 334/678-1832 Huntsville • 256/851-2222 Mobile • 251/457-8991 Montgomery • 334/288-6580 Tuscaloosa • 205/752-0621

Florida Panama City • 850/763-4654 Pensacola • 850/505-0550

Georgia Albany • 229/435-0982 Atlanta • 404-366-0693 Augusta • 706/798-7777 Calhoun • 706/879-6200 Columbus • 706/562-1801 Hoschton • 706/654-9850 Kennesaw • 678/354-5533 Macon • 478/745-6891 Savannah • 912/330-7500

Page 74 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALABAMA

Stone Equipment Co., Inc. 1797-A Fulton Spring Rd. Alabaster, AL 35007 844-786-6373 210 West Blvd. Montgomery, AL 36108 844-786-6373 www.stoneequipmentco.com

GEORGIA

Crosby Equipment Company, Inc. 1826 South Peterson Ave. Douglas, GA 31535 912-384-4664 5368 Hawkinsville Rd. Macon, GA 31216 478-257-8300 www.crosbyequipmentco.com

Taylor Construction Equipment 5640 Commerce Blvd. East Mobile, AL 36619 251-666-2924 www.taylorconstructionequipment.com

NED Georgia Richmond Hill-Savannah, GA 912-756-7854 www.nedealers.com

CAROLINAS

MISSISSIPPI

Formerly Grove River Machinery

North Carolina, South Carolina, Virginia, West Virginia

Powerscreen Mid-Atlantic, Inc. PO Box 2505 • Kernersville, NC 27285 Tel: 800-797-7276 Web: www.powerscreenmidatl.com

NED - Carolinas Formerly MAY-RHI, Richardson Service 1991, Inc

The Easy Way To Advertise Your Equipment

Run In Two Consecutive Issues – Black & White $135 • Color $195

SEE YOUR BARGAIN AD IN COLOR.

ONLY $60 EXTRA Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 7-8 EB Call 866-294-6103

Charlotte, NC 704-228-0455 Clayton-Raleigh, NC 886-629-3784 Grimesland, NC 252-752-1500 Lexington, NC 866-629-3784 Columbia, SC 888-865-1002 Conway-Myrtle Beach, SC 800-968-0754 Piedmont-Greenville, SC 864-434-1154 Summerville-Charleston, SC 843-501-0566 www.nedealers.com

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 21,969 Construction Equipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

Taylor Construction Equipment 3637 N. Church Avenue Louisville, MS 39339 833-773-3421 103 Industrial Park Road Philadelphia, MS 39350 833-773-3421 www.taylorconstructionequipment.com TENNESSE

FLORIDA

FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work:

Mid South Machinery 3233 Hwy. 80 W. Jackson, MS 39204 601-948-6740 www.gomidsouth.com

NED - Florida Formerly Earthmovers Construction Equipment Apopka-Orlando, FL 407-401-8956 Ft. Pierce, FL 772-212-4043 Tampa, FL 813-940-4405 www.nedealers.com

Taylor Construction Equipment 104 Brickmill Commercial Dr. Maryville, TN 37801 865-444-0883 132 Industrial Dr. White House, TN 37188 615-392-4803 www.taylorconstructionequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 75

Safety Get an Is “A” Priceless, with Hyundai Not Expensive Hyundai Construction Equipment is excited to announce the launching of our new A-series machines. Along with a new look, these machines are packed of standard new Hyundai HXfull series excavators are features packed and benefits to get the job done with standard safety features that help efficiently. your operators work more efﬁciently.

All cabs are ROPS/FOPS certiﬁed • ACummins Performance rearview camera, whichSeries can beEngines Stage V emissions compliant engines viewed from the 8-inch touchscreen monitor, is standard • EPFC (Electric Positive Flow Control) Large grab rails and guard rails and Reduces daily fuel consumption by 8-11% Hyundai’s proprietary anti-slip surfaces help avoid falls while working on the • EPIC (Electric Pump Independent Control) outside of the machine Improved controllability with reduced Automatic RPM drop travel backup alarm is standard • Serviceability/Safety Enhanced cab visibility Easy access engine panels

Hyundai’s exclusive All-Around View Monitoring option provides unprecedented visibility to the worksite.

More standard standard features. features. More More value. value. More

www.hceamericas.com www.hceamericas.com To learn more about about the what the new Hyundai A-Series machines can offer your business, contact yourHyundai Hyundai dealer today. To learn more the safety features built into HX series excavators, contact your dealer today.

Page 76 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 77

Central Atlanta Tractor Sales, Inc.

Highway Equipment Company

Stone Equipment Co., Inc.

4240 Martin Luther King Jr Drive SW Atlanta, GA 30336 770-819-6600 www.centralatlantatractor.com

Roanoke Location 8071 Lee Highway Troutville, VA 24175 540-992-4150 www.highway-equipment.com

210 West Boulevard 1797-A Fulton Springs Rd Montgomery, AL 36108 Alabaster, AL 35007 844-786-6373 844-786-6373 334-625-6585 www.stoneequipmentco.com

Taylor Construction Equipment 3637 N Church Avenue Louisville, MS 39339 833-773-3421

104 Brickmill Commercial Dr Maryville, TN 37801 865-444-0883 www.taylorconstructionequipment.com

132 Industrial Dr White House, TN 37188 615-392-4803

Page 78 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (WORLDWIDE): CATERPILLAR 966F WHEEL LOADERS – NEED TO BUY USED CAT WHEEL LOADERS 966F, 966-F-II, 980C, AND CAT 970F. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CONCRETE PUMPS: SCHWING, PUTZMEISTER, ALLIANCE, ELBA, CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS, & SIZES, OLD OR NEW! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED AND PARTS & PUMPS NEEDING REPAIRS. INSTANT PAYMENT GUARANTEED. EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 140G MOTOR GRADERS – CAT USED MOTOR GRADER 140G AND 140H FOR OWN STOCK. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX330-5 EXCAVATORS – WE ARE LOOKING TO BUY A COUPLE OF UNITS OF HITACHI EXCAVATORS EX 330-5 & EX 450-5. IF YOU HAVE ANY OF THEM AVAILABLE, PLEASE LET ME KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988B WHEEL LOADER– WE NEED TO BUY A CAT USED WHEEL LOADER 936, 988B/F & 950B. IF YOU HAVE AVAILABLE, PLEASE DO LET US KNOW. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.CO M –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 992D EXCAVATORS – NEED TO LOCATE JOHN DEERE'S EXCAVATORS SIZES 190E, 200, 210, 230, 270, 300, 400. EMAIL: USEDEQUIPMENTS TRADINGLLC@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): EZ SCREEN 1200XLS SCREENING – ANYTHING THAT WOULD BE LIKE A 1200 OR1200 XLS. EMAIL: MAIERLANDSCAPING@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR BACKHOE LOADERS, ALL MODELS – NEED TO BUY USED CAT WHEEL LOADERS, BACKHOES, EXCAVATORS, HIGHWAY TRUCK. EMAIL: SEARCHT930@GMAIL.COM PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED: CHAINS AND SPROCKETS FOR KOBELCO 400IV OR 480 EXCAVATOR, NEW OR USED. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 ––––––––––––––––––––––––––––––––

WANTED: BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE BUCKETS, ALL MODELS; LOOKING FOR BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR DUMP TRUCKS - CAT 725-745'S 10,000 HOURS OR LESS, WILL BUY IN GROUPS. EMAIL: ANDREWL@BLACKSTARACA.COM; PHONE: 312-898-5355 –––––––––––––––––––––––––––––––– WANTED (US); TEREX BUCKET TRUCKS, ALL MODELS - 55 FT & 60 FT 4-5 YEARS OLD, PREFERABLY PREFER TEREX 5TC-55 & ALTEC AA55E PREFER FREIGHTLINER CHASSIS. EMAIL: ZACHZ@BLACKSTARACA.COM; PHONE: 815-575-6797 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS; RUNNING OR NONRUNNING UNITS REQUIRED. EMAIL: IMPERIALMACHINERYTRADER@GMAIL.COM; PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADERS EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS: 580SK, 580L, 580SL, 580LII, 580SLII, 580M, 580MII, 580MIII, 580SM, 580SM+, 580SMII, 580SMIII, 580N EP, 580N, 580SN, 580SN WT EMAIL: FRANKHORAN@ GROFFTRACTOR.COM PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR MOTOR GRADERS, ALL MODELS LOOKING TO BUY USED CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H AND 14M. PLEASE SEND ME A PICTURE OF WHAT YOU HAVE WITH DETAIL AND YOUR ASKING PRICE. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI / JOHN DEERE EXCAVATORS 400 AND 450 SIZES. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +92-333-5555-360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS - URGENTLY NEED CAT 916, 926, 966F AND 970F WHEEL LOADER, ALSO HITACHI EXCAVATORS EX 270, EX 400 AND 450. EMAIL: IUKANDCO@GMAIL.COM; PHONE: +923335555360 ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI EXCAVATORS, ALL MODELS; WE ARE INTERESTED IN BUYING HITACHI EXCAVATORS (DIGGERS) 450, 400, 270, 300, 200 SIZE. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): INTERNATIONAL MODEL FUEL / LUBE TRUCKS, ALL MODELS. LOOKING FOR 1 OR 2 FUEL TRUCKS. THEY WOULD NEED TO BE: AUTOMATIC TRANSMISSION -DECENT MILES, ENGINE HOURS -PREFERABLY MULTIPLE COMPARTMENTS -PREFERABLY INTERNATIONAL, BUT NOT A MUST -NO DPF, OR MAXXFORCE ENGINES. ONE WOULD BE MAXIMUM $40,000 RANGE, AND THE OTHER AS CHEAP AS POSSIBLE. THANK YOU. EMAIL: MANAGER@ COMMERCIALFLEETSUPPLY.COM; PHONE: 347-489-4474 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 LC-5 EXCAVATORS. WE ARE LOOKING FOR USED HEAVY CONSTRUCTION MACHINES. PLEASE OFFER US FOLLOWING MENTION MACHINES & EMAIL US DETAILS WITH PICTURES CATERPILLAR MOTOR GRADERS 140G CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966FII, 970F, 980F HITACHI EXCAVATORS EX200, EX200LC, EX270LC, EX400, EX400LC, EX300LC, EX330LC-5, EX450LC-5, EX400-5, EX60WD, EX100WD. JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM PHONE: +923332316587 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 950B WHEEL LOADERS - LOOKING TO BUY CAT WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. EMAIL: NAQIB_KHAN73@YAHOO.COM PHONE: +923333298751 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR EXCAVATORS, ALL MODELS; LOOKING FOR SEVERAL CAT 330DL, 336DL, 336EL EXCAVATORS UNDER 10,000 HOURS AND WHOLESALE PRICED. EMAIL: LJEQUIPMENT3@GMAIL.COM; PHONE: 1-3309873508 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; LOOKING FOR OLDER HITACHI EXCAVATORS AND CAT WHEEL LOADERS, IN GOOD RUNNING CONDITION OR NON-RUNNING MACHINES. EMAIL US TO DISCUSS. EMAIL: IKCEQUIPMENTS@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI EX 400 AND 450 SIZES EXCAVATORS. EMAIL: IUKANDCO@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS HITACHI EXCAVATORS – WE NEED TO BUY HITACHI EXCAVATORS ZX 200-1, ZX 330, ZX 450, ZX 650, ZX 850 EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. ALSO KOMATSU EXCAVATORS PC400, KOMATSU PC 450-6, KOMATSU PC 7506. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW, THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA-600-3, WA-600-6, WA-30, WA-40, WA 50. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE INTERESTED IN BUYING JOHN DEERE EXCAVATORS 790, 495 & 595 AND HITACHI EXCAVATORS EX 270-1, EX 270-5, EX 300-1, EX 400-1 AND EX 450-5. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE.. MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VERIZON.NET; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 ––––––––––––––––––––––––––––––––

WANTED (WV): NELSON 6000 WELDERS - LOOKING FOR NELSON DUAL GUN SYSTEM WITH GEN SET AND TRAILER, AND/OR PRO-WELD DUAL GUN ARC 3000 MACHINE. EMAIL: WEH@ TRIANGLEINCORPORATED.COM; PHONE: 304-562-6282 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CHALLENGER 85C TRACTORS - I AM IN NEED OF A USED SET OF TRACKS FOR ANY OF THE CAT CHALLENGER 65, 75 OR 85C. EMAIL: PI2279@YAHOO.COM; PHONE: 319-470-8388 –––––––––––––––––––––––––––––––– WANTED (MA): ALL MODELS CATERPILLAR EXCAVATORS - LOWER SUPPORT RAIL GOES FRONT TO BACK RIGHT SIDE AND TOOL BOX RH SIDE LOWER RAIL THAT GOES FRONT TO BACK SUPPORTING TOOL BOX. EMAIL: BILLD@TDICENZO.COM; PHONE: 207-214-9610 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 79

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS ABSOLUTE AUCTION & REALTY, INC. www.lyonauction.com 315-633-2944 www.AARauctions.com 800-243-0061 • Houston, TX Thurs., April 21, 2022 For: Complete Liquidation Construction Division • Manchester, NH Fri., April 22, 2022 For: Late Model Rental Fleet Equipment • Dubois, PA Thurs., April 28, 2022 For: Retirement. Coal Mine & Excavating Company • Online Thurs., April 28, 2022 For: Late Model Construction Equipment & more (Mexico)

• Online Ends April 20, 2022 For: Dover Plains, NY Equipment Auction BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Live Online Fri., April 29, 2022 For: Woodburn, OR Monthly Public Auction • Live Online Sat., May 14, 2022 For: Sacramento, CA Monthly Public Auction

• Youngstown, OH Fri., April 29, 2022 For: Complete Liquidation Major • Live Online Bridge Contractor Fri., May 27, 2022 For: Woodburn, OR Monthly • Howe Cavern, NY Public Auction Fri., April 29, 2022 For: 1 Owner Ag & Construction Equipment & more BIDADOO AUCTIONS • Timed Online www.bidadoo.com April 29 – May 11, 2022 1-877-BIDADOO For: Central New York • Online • Youngstown, OH April 26, 2022 Sat., April 30, 2022 • Online For: Large One Owner Construction Equipment & more May 3, 2022 • Syracuse, NY Wed., May 4, 2022 For: Fun Charity Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Sacramento, CA April 22, 2022 • Edmonton, AB May 2 - 6, 2022 • Toronto, ON May 10 - 12, 2022 • Winnipeg, MB May 11 - 12, 2022 • Los Angeles May 13, 2022 • Fort Worth, TX May 17 - 19, 2022 • Montreal, QC May 18 - 20, 2022 • Orlando, FL May 19, 2022 • Tipton, CA May 19, 2022 • Chilliwack, BC May 24 - 25, 2022 • Rocky Mountain Regional May 25 - 26, 2022 • Atlantic Canada Regional May 26, 2022

BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • Online April 20, 2022 • Online April 27, 2022 • Online May 4, 2022 BLACK STAR ACA www.blackstaraca.com 800-610-2192 • Live Virtual Thurs., April 21, 2022 For: Unreserved Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Sellersburg, IN Fri., April 22, 2022 For: Absolute Equipment Auction • Winamac, IN Tues., April 26, 2022 For: Spring INDOT Absolute Auction DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853 • Stoutsville, OH Sat., May 14, 2022 For: Spring Columbus Heavy Equipment Truck & Trailer Auction GEYER AUCTION COMPANIES www.geyerauctions.com 484-239-3273 • Ephrata, PA Thurs., April 28, 2022 For: Excavating Contractor Complete Liquidation Auction HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012

IRON AUCTION GROUP www.ironauctiongroup.com 864-546-1216 • Midland, NC Tues., April 26, 2022 For: Unreserved Public Heavy Truck & Equipment Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Timed Online Tues., April 26, 2022 For: Online Only Auction J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Canal Fulton, OH Thurs., April 28, 2022 For: Construction Retirement Auction

• Online Only Wed., May 18, 2022 For: Heavy Equipment, Semi, Truck, Trailer Consignment Auction

• Glencoe, MN Sat., April 30, 2022 For: Farm Equipment Auction • Online Only Tues., May 3, 2022 • Akron, OH Sat., May 7, 2022 For: Live & Online • Stanton, TX Sat., May 14, 2022 For: Live & Online • Orangeburg, SC Tues., May 24, 2022 For: Live & Online • Holland, OH Thurs., May 26, 2022 For: Live & Online

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Timed Online Fri., May 6, 2022 For: 13th Annual Spring Auction

NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

• Dighton, MA May 6 - 7, 2022 For: Annual Spring Auction

• Online Thurs., April 21, 2022 For: Construction Equipment Auction

• Gillsville, GA Tues., April 26, 2022 For: Inventory Reduction Auction

• Geneseo, NY Sat., April 30, 2022 For: NY Favorite Consignment Auction

• Windsor Locks, CT Sat., May 7, 2022 For: 13th Annual Spring Auction

• Online June 7 - 14, 2022 For: Public Online Logging & Mill Equipment Auction

• Marietta, PA Fri., June 10, 2022 For: Truck, Trailer & Equipment Auction

RTI AUCTIONS www.teitsworth.com 585-243-1563

• Gaylord, MI Sat., May 7, 2022 For: Spring Equipment Auction

• Online Wed., April 20, 2022 For: Vehicles & Equipment Auction

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• Online Thurs., April 28, 2022 For: Surplus Oil & Gas Equipment Webcast Auction

LEIST AUCTIONEERS michiganauction.com 833-323-2243

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

• Robbinsville, NC Thurs., April 21, 2022 For: Inventory Reduction Auction

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Carrollton, GA Fri., May 27, 2022 For: West Georgia Heavy Equipment Public Auction

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

CINCINNATI INDUSTRIAL AUCTIONEERS www.cia-auction.com 513-241-9701

• Cope, SC Sat., May 14, 2022 For: Low Country Heavy Equipment Public Auction

• Live Online April 28 - 29, 2022 For: Public Live Online Only Auction

• Mosinee, WI April 28 - 29, 2022 For: Nitke Spring 2-Day Contractor Auction

BUNCH BROTHERS • Virtual Live AUCTIONEERS www.bunchbrothersauctioneers.com Wed., April 27, 2022 For: Complete Liquidation 270-376-2992 Rochelle Contracting Co., Inc. • Louisville, KY • Virtual Live April 26 - 27, 2022 Wed., May 11, 2022 For: Surplus Liquidation R&R For: Spring Louisville Auction Construction Co., Inc.

JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800

• Online Tues., April 26, 2022 For: Government Auction • Online Wed., April 27, 2022 For: Ag Equipment Auction • Online Thurs., April 28, 2022 For: Truck & Trailer Auction • Online Wed., May 4, 2022 For: Vehicles & Equipment Auction • Online Thurs., May 5, 2022 For: Monarch Cement Surplus Equipment & Inventory Auction • Online Tues., May 10, 2022 For: Government Auction • Online Wed., May 11, 2022 For: Ag Equipment Auction

• Timed Online April 15 - 20, 2022 For: Online Steffes Auction, Midwest Locations • Timed Online April 21 - 28, 2022 For: Richard’s Inc. Trucking Auction • Timed Online May 3 - 10, 2022 For: City of Fargo Fleet Equipment Auction • Timed Online May 6 - 11, 2022 For: Steffes Auction –Midwest Locations • Timed Online May 10 - 17, 2022 For: S&H Construction Retirement Auction • Timed Online May 11, 2022 For: Bard Materials Construction Equipment

SULLIVAN AUCTIONEERS www.sullivanauctioneers.com 844-847-2161 • Timed Online Closes: Thurs., April 21, 2022 For: No Reserve Inventory Reduction Auction

• Online Thurs., May 12, 2022 For: Truck & Trailer Auction

YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990

RES AUCTION SERVICES www.RES.bid 833-SOLD-RES

• Kissimmee, FL Wed., May 18, 2022 For: Florida Auction

• Wooster, OH Sat., May 14, 2022 For: Construction Equipment Consignment Auction

• Findlay, OH Thurs., June 2, 2022 For: Ohio Auction

Page 80 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Compass Performs as Heavy Equipment Auctioneer

C In the case where there were conditional sales opportunities, Compass brokered agreements to complete the sale and achieved an 89 percent success rate.

Included in the sale lineup was a 1998 Komatsu dozer.

Compass featured “yellow iron” at this sale, including a 2012 Kobelco excavator.

A 2016 New Holland mini-excavator E55BX was on the auction block at Compass’ February sale.

ompass Auctions, located in Chattanooga, Tenn., has had a long history with heavy equipment auctions as “special events” for the company and its clients. The company changed its direction in 2022 and has committed to making heavy equipment part of its monthly auction and will offer a selection of “yellow iron” — including Caterpillar, Komatsu, Kobelco and New Holland — in an extensive catalog including industrial and construction surplus, vehicles and more. For the month of February, Compass featured Cat equipment being sold on reserve. Compass achieved a sale price of 14 to 48 percent higher than the reserve. The highest bid was on a 2018 Caterpillar excavator 336FL, which sold for $285,000. Compass currently is offering 25 to 30 pieces of equipment in any given month. “Realistically, our auctions help people to move surplus quicker,” Chris Wood, general sales manager, said. “People and companies who are out there searching for heavy equipment usually have to wait for what they need with current supply chain issues. We have connections that want to move equipment now. We try to offer a popular selection, and our bidders have the ability to buy sooner than they would at a lot of other places. “Our team is committed to customer satisfaction. In the case where there were conditional sales opportunities, Compass brokered agreements to complete the sale and achieved an 89 percent success rate.” Compass is searching for new consignment partners desiring to work with an auction company that is squarely focused on client satisfaction and is an innovator in its approach to auction marketing and sales, the company said. The heavy equipment auction items can be found in the Monthly Day 1 auctions held on the last Wednesday of the month. “We are open to special sale opportunities as well,” said Wood, “and we also have the ability to hold auction sales in place. Meaning you don’t have to transport the equipment or other items to our facility to be included in an auction. We find this is a huge time and cost saving to our partners.” For more information, call 800/7296466 or email cwood@SoldOnCompass.com.  CEG

The sale catalog includes high-demand Cat equipment manufactured in 2018, including this dozer.

Compass Auction’s February auction included Cat equipment with fewer than 400 hours, including this 2018 front end loader.

The Compass Auction team is committed to customer satisfaction, according to Chris Wood, general sales manager.

A 2018 Caterpillar excavator 336FL, which sold for $285,000, was the highest bid item of the day.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 81

669 Marina Drive, B-2 Charleston, SC 29492 (864) 546-1216

NC AL# 10270

Unreserved Unreserved Public Heavy He eavy Eq p Au uction Truck and Equipment Auction

April 26, 2 2022 | 10 AM EST EST 3820 Garmon Milll Road | Midland, NC N 28107

This aucttion features late model day cab and sleeper ro oad tractors, trailers, quality construcction equipment and mo ore!

Accepting Consignments through April 21sst at 3PM.

Live and Online Bidd ding g Text “iron” to 888-4 401-2999 to subscribe to our te ext alerts.

Online bidding pro ovided by

PLEASE NOTE: Masks and PL d social distancing required for onsit o e guests. To cons nsign your items, conttact: Matt McGaf Gaffee | (276) 451-8 8921 matt@irona nauctiongroup.co om Terry McGaffee e | (276) 608-3 3787 terry@ironauction y iongroup.co g p om

Jared McGaffee | (2 276) 202-6800 jared@ironauctiongroup.com Sam Ingram | (770) 312-1432 sam@ironauction i i ngroup.com

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. APRIL/MAY 2022 CRANE SAFETY COURSES April 19 – April 20, 2022 Forklift Operator & Inspector, Cincinnati, OH April 19 – April 21, 2022 Forklift Operator Train the Trainer, Orlando, FL April 19 – April 22, 2022 Mobile Crane Inspector, Houston, TX April 25 – April 26, 2022 Aerial-Work-Platform-Operator-Inspector, Orlando, FL April 25 – April 29, 2022 Mobile Crane Train the Trainer, Houston, TX April 27 – April 28, 2022 Qualiﬁed Signal Person, Orlando, FL April 27 – April 29, 2022 Tower Crane Operator & Inspector, Cincinnati, OH May 2 – May 6, 2022 Qualiﬁed Rigger and Signal Person, Houston, TX May 3 – May 6, 2022 Overhead Crane Train the Trainer, Cincinnati, OH May 4 – May 5, 2022 Forklift Operator & Inspector, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

For morre information and item descriptions, visit IronA AuctionGroup.com. p

SOLD OUT! Virtual AGC BIM Education Program Date: Monday, May 9, 2022 (5:00 PM) Training/Professional Development 2022 ACI-NA/ACC/AGC Airport Construction Strategy Summit Date: Tuesday, May 10, 2022 (8:00 AM) Location: Orlando, Florida Training/Professional Development Transportation Construction Coalition Legislative Fly-In and Brieﬁng Date: Monday, May 16, 2022 (8:00 AM) Location: Washington, DC, District of Columbia Other Transportation Construction Coalition Legislative Fly-In and Brieﬁng Date: Wednesday, May 18, 2022 (5:00 PM) Location: Washington, DC, District of Columbia Other AGC’s Virtual Lean Construction Education Program Date: Thursday, May 19, 2022 (10:00 AM) Training/Professional Development For further information, contact AGC: Phone: 703/548-3118 Fax: 240/396-2470 Email: info@agc.org

ASSOCIATED GENERAL CONTRACTORS (AGC) Virtual BIM Education Program Dates: April 14, 2022 – April 28, 2022 Times: 11:00 AM to 3:00 PM EDT Description: AGC’s Two Part Virtual BIM Workshop for Advanced Practitioners: BIM has become a competitive advantage among the professionals of the industry. But there are challenges. In Design-Build projects the builder’s design manager and the designer’s BIM manager can have confused roles creating duplication and gaps in management. Too many “cooks” can create conflicts and clashes which waste time. Good, clear processes overcome these and other challenges. These workshops clarify questions occurring in every BIM-centric project process and offer best practices for truly Lean, productive design-build teams. In which aspects is BIM beneficial? ASSOCIATED GENERAL CONTRACTORS (AGC) Transparency – Collaborative work enables the participation of all playAGC) EVENTS CALENDAR: ers, who have access to all the information and details available for all AGC Safety Management Training Course (SMTC) areas of the work. Date: Wednesday, April 20, 2022, 8:00 AM Real-time data update – Technology combined with collaborative work Safety and Health (https://www.agc.org/learn/education-training/safety-training/safety- allows you to integrate and change drawings and details automaticalmanagement-training-course) ly. Virtual Construction Supervision Fundamentals (CSF) Course Unique language for all – BIM enables integrated communication Date: Tuesday, May 3, 2022, 9:00 AM between all parties involved. Training/Professional Development Intelligent drawing – The drawings have detailed information, for exam(https://www.agc.org/learn/education-training/events/virtual-construc- ple, calculations can be done automatically, and information is added tion-supervision-fundamentals-csf-course-0) simultaneously to the graphic part of the project.

Geographical evaluation of the project location - BIM allows an analysis of the geographic and social impacts of the structure to see the viability of the construction work in the given location. More effective execution – By virtually representing the project and still counting on the collaborative work of all the parties involved, BIM makes it possible to predict errors and avoid unforeseen events, as well as verify the feasibility of the construction site, which makes the project more efficient, reducing time and cost overruns. Precise timeline – BIM is present throughout all phases of the project’s life cycle, and when associated with a schedule of activities, it enables all space requirements, work resources, materials, and deliverables to be transmitted. Personal, company and country marketing - BIM has become a competitive advantage among the professionals of the industry: for architectural and engineering offices and construction companies alike. At the same time, BIM has also the potential to bring better results to governmental management. Courses will be offered online via Zoom platform, webcam required for participation. Earn 8 CM-Lean CE Hours towards CM-BIM and CM-Lean Renewals For more information on this program, contact AGC: Phone: 703/548-3118. Fax: 703/548-3119. Website: www.agc.org/contact-us or Email info@agc.org.

OLYMPIC LOGGING CONFERENCE 75th Annual Olympic Logging Conference Dates: April 27-29, 2022 Location: Fairmont Empress Hotel, Victoria, BC Description: Honoring the Past, Focusing on the Future: A Tradition of Relevance The Olympic Logging Conference brings together people who are involved in the forest products industry of Western Washington State. Roughly 275 people attend the conference, all having various industry backgrounds: timber purchasers and sellers, log conversion representatives, logging and log trucking contractors and private and public landowners. The attendees come from both the private and public sectors. The conference offers a forum where people within the industry can network with one another. Spouses or significant others are encouraged to attend the conference. A variety of receptions, dinners, entertainment venues plus a golf tournament are hosted by the Olympic Logging Conference during the 3 day event. Online registration is now open! For more information, visit www.olympicloggingconference.com/ or email: info@olcnw.com

Occupational Safety and Health Administration (OSHA) OSHA 30 for Construction Dates: May 10 – 13, 2022 Associated Equipment Distributors (AED) This course is recommended for employees with a responsibility for 2022 Financial/HR Symposium site safety. It covers OSHA policies, procedures, and standards, as well Dates: April 20, 2022 (5:00 PM) to April 22, 2022 (12:30 as construction safety and health principles. Upon completion of the PM) course, students receive an OSHA construction safety and health 30Location: Hyatt Regency Boston, Boston, MA Hour course completion card. Event Description: 2022 Financial/HR Symposium Register Now! Phone: 248/972-1000 Email: cam@buildwithCam.com Learn from industry experts on both the ﬁnance and HR side about the most pressing topics impacting equipment distributors. Bring back Construction Association of Michigan (CAM) tools and solutions to the issues that are affecting your dealership. In Formerly Builders Exchange of Detroit and Michigan. CAM is a profesaddition to hearing new ideas and learning about best practices and sional association of design and construction professionals which proreceiving regulatory and legal updates, attendees will have several vides service, information, and assistance to the construction industry. opportunities to brainstorm and network with like-minded dealership Members include architects, engineers, suppliers, manufacturers, and professionals. contractors. Who Should Attend? For more information on the events listed below, contact CAM: Finance Managers, Directors of Finance , Controllers, HR Phone: 248/972-1000 Fax: 248/972-1001 Directors/Managers, Technical Recruiters, CFOs, Account Leaders, Email: cam@buildwithCAM.com Training Managers, Vice Presidents of Finance, E-Commerce Managers, Directors of Accounting, HR Generalists, Education Construction Association of Michigan 2022 Golf Season – Registration is Open! Coordinators This year’s schedule features four value-packed outings at remarkable Is your Job Title listed above? If yes, register today! For further information, contact Associated Equipment Distributors prices. These outings are perfect opportunities to bring your staff and clients (AED) out for a great afternoon of golf! Phone: 630/574-0650 Email: help@aednet.org

Events are subject to change, check websites for updates

Page 82 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ASCENDUM MACHINERY INC ........................................................2 ASV ................................................................................................63 BARGAINS ......................................................................................74 BELL TRUCKS AMERICA INC ........................................................77 BERGMANN AMERICA ..................................................................24 BOBCAT COMPANY ......................................................................55 BROOKS SALES INC ....................................................................31 CAROLINA CAT ..............................................................................25 CEG SCALE MODELS ....................................................................72 CLEVELAND BROTHERS EQUIPMENT CO ............................18,19 COMPANY WRENCH......................................................................12 CON-EQUIP LLC ............................................................................16 CONDUIT SEARCH GROUP ..........................................................76 CONEXPO-CON/AGG 2023............................................................28 CONSTRUCTION EQUIPMENT GUIDE ....................................52,78 DOMINION EQUIPMENT PARTS ..................................................58 DYNAPAC........................................................................................42 E D ETNYRE & CO ........................................................................43 FAE USA INC ..................................................................................10 FLANGE LOCK................................................................................21 FLINT EQUIPMENT COMPANY - VMLY ........................................13 FLUID CONTROL SERVICES ........................................................16 GEHL ..............................................................................................66 GOMACO CORP ........................................................................48,49 GSE GREAT SOUTH EQUIPMENT COMPANY ..............................9 HEAVY MACHINES INC....................................................................3 HILLS MACHINERY COMPANY LLC..............................................84 HITACHI CONSTRUCTION MACHINERY ....................................71 HYUNDAI CONSTRUCTION EQUIPMENT ..............................74,75 IRON AUCTION GROUP ................................................................81 JAMES RIVER EQUIPMENT ............................................................5 JCB INC ..........................................................................................60 JFW EQUIPMENT INC....................................................................47 JJ SCHECKEL CORP ....................................................................22 JOHN DEERE..................................................................................83 JOHN DEERE SKID STEER ..........................................................67 KOMATSU AMERICA CORP ..........................................................73 KUBOTA SVL ..................................................................................61

LEEBOY ....................................................................................40,41 LINK-BELT MID ATLANTIC ............................................................23 MAULDIN PAVING PRODUCTS ....................................................36 MECALAC NORTH AMERICA LLC ................................................29 MOBRO MARINE INC ......................................................................6 MONTABERT ..................................................................................68 MWI PUMPS....................................................................................24 NATIONAL EQUIPMENT DEALERS ..............................................68 NPK CONSTRUCTION EQUIPMENT INC......................................65 OKADA AMERICA INC ....................................................................57 PINNACLE CENTRAL CO ..............................................................31 PINNACLE CRANES ......................................................................17 POWER EQUIPMENT CO ................................................................7 POWERSCREEN ............................................................................74 RICHMOND MACHINERY & EQUIPMENT ....................................47 RING POWER CRANE ..................................................................15 ROSCO MANUFACTURING ......................................................44,45 SAKAI AMERICA INC ......................................................................37 SANY AMERICA INC ......................................................................27 SMH GROUP-US ............................................................................15 SOUND HEAVY MACHINERY ........................................................11 TAKEUCHI ......................................................................................69 THUNDER CREEK - PKA ..............................................................33 TORO ..............................................................................................57 TRACTOR TRACS INC ..................................................................10 VOLVO COMPACTION ..................................................................50 WACKER NEUSON AMERICA CORPORATION ............................59 WAINROY........................................................................................66 WEILER PRODUCTS ................................................................38,39 WIRTGEN AMERICA ......................................................................51 GEORGIA SUPPLEMENT CENTRAL ATLANTA TRACTOR ......................................................7 COWIN EQUIPMENT CO INC ..........................................................2 GORILLA HAMMERS ........................................................................1 REYNOLDS-WARREN EQUIPMENT CO INC..................................3 TRACTOR & EQUIPMENT CO INC..................................................8 YANCEY BROTHERS CO ................................................................5

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 20, 2022 • Page 83

THE POWER OF CHOICE

JUST GOT BIGGER. Expect big things from the John Deere 850L Dozer. Larger and more powerful than the previous K-Series model, the 850L gives you 10% more horsepower and 23% more torque for mass earthmoving. And with state-of-the-art controls, the usual Deere arsenal of production-boosting hydrostatic advantages, a SmartGrade™ fully integrated grade-control option, and the choice of a Power-Angle-Tilt (PAT) or Outside Dozer (OSD) blade, you’ll have the precision and performance you need to step it up. Stop by or call us today.

Dobbs Equipment

FLINT

www.beardequipment.com

www.dobbsequipment.com

www.flintequipco.com

Mobile, AL 251/456-1993 Pensacola, FL 850/476-0277 Freeport, FL 850/835-3337 Panama City, FL 850/769-4844 Tallahassee, FL 850/575-5600 Perry, FL 850/584-9200 Jacksonville, FL 904/296-5000 Lake City, FL 386/752-9544 Palatka, FL 386/325-6268 Ocala, FL 352/732-4646

Riverview, FL (HQ) 813/620-1000 Miami, FL 305/592-5740 West Palm Beach, FL 561/848-6618 Orlando, FL 407/299-1212 Fort Myers, FL 239/334-3627 Lutz, FL 813/995-0841 Daytona, FL 407/299-1212 Riverview, FL 813/621-4902 Pompano Beach, FL 954/977-9541 Sarasota, FL 941/960-2004

Beard Equipment Company

Dothan, AL 334/794-8691 Troy, AL 334/566-4181 Adairsville, GA 770/773-9857 Albany, GA 229/888-1212 Atlanta, GA 404/691-9445 Braselton, GA 770/965-1889 Brunswick, GA 912/264-6161 Columbus, GA 706/687-3344 Grovetown, GA 706/855-5440

Macon, GA 478/788-1586 Savannah, GA 912/964-7370 Valdosta, GA 229/474-6680 Andrews, SC 843/221-4940 Aynor, SC 843/358-5688 Ladson, SC 843/572-0400 Simpsonville, SC 864/963-5835 Walterboro, SC 843/539-1420 West Columbia, SC 803/794-9340

Page 84 • April 20, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GET OUTSIDE & GET IT DONE With warm weather coming just around the corner and projects beginning to spring up, make sure you’re prepared for the work ahead. The largest skid steer from CASE, the SV340B, is your all-around solution for fast and efﬁcient earthmoving. Reach h out to our team to secure this machine for your upcoming jobs.

Grow Your Business with Hills Machiner y.

QUALITY USED U EQUIPMENT FROM HILL LS MACHINERY

O P F

O P F 2012 Case SV212 84” smooth drum roller, EROPS, 2373 hours. RO7248 ..............$64,000 2017 TA300, AT5414, 4000 HOURS, 48 MONTHS / 6000 HOUR WARRANTY ............ ..........................................................$240,000

2015 Casee CX210C 2 way auxiliary hydraulics, hydraulic tthumb. Fresh service, including new 2018 SV212D, RO5092, 2590 HOURS, EX2865.................$105,000 pins and bbushings. 84” SMOOTH DRUM ROLLER ............$97,000

O P F

2016 Terex Finlay 883+ 9.16 CY hopper, 48” conveyor, 32” middle graade conveyor, 2018 TR310, CT5334, 1399...............$217,700 HOURS, CAB ........ 32” ﬁnes conveyor. CS6573. ............................................................$44,000

2016 Edge TRM622 Trommel 48” feeder belt, 2018 586H, FL4122, 4493 HOURS, 4WD, 60” collectiion belt, 42” oversize belt, 42” radiall 15’ MAST, 3,490 HOURS, JUST SERVICED. ﬁnes belt, 77/8 function radio remote control. WARRANTY THOUGH 6/2022 OR 5,000 HOUR .. CS0276 ..............................................$202,8800 ............................................................$60,000

North Carolina Asheville 828-820-5265 828 820 5265

Charlotte 704-208-5564 704 208 5564

South Carolina Greensboro 336-308-3045 336 308 304 45

Greenville 252-752-7145 252 752 7145

Raleigh 919-746-7938 919 746 7938

Wilmington 910-800-2070 910 800 2070

Columbia 803 803-658-0200 658 0200

Charle eston 843 22 843-22 25-9377

Greenville 864-546-5208