Issuu

State Supplement sponsored by:

THE NEW ENGLAND EDITION

A Supplement to:

201 16 9

1 3

95 3

2 2 7

495

89 4

202

95 2

93 90

95 91

SHIP WITHIN 48 HOURS

495 6

195

395

95 91

October 27 2021 Vol. LIX • No. 22

SAME DAY PARTS AVAILABILITY

24 HOUR TECHNICAL SUPPORT BACKED BY A 75 YEAR BUSINESS Thousands in Service!

“The Nation’s Best Read Construction Newspaper… Founded in 1957.”

Your New England States Connection • Kent Hogeboom 315-866-1423

Affordable Price. Premium Service.

CALL 800-367-4937 *On approved credit • Financing Available

2208 Plainfield Pike • Johnston, RI 02919 401-943-7100 • Fax: 401-647-5041

www.jrvinagrocorp.com info@jrvinagrocorp.com

Specializing in:

Demolition, Portable Crushing, Material Sales, C & D Recycling, Land Clearing, Heavy Hauling & Trucking Call for Pricing

LEED Accredited in Waste Management

2021 EZ-Screen 1200XLS

*Limited time offer. Some restrictions apply. See dealer for details.

LEASE THE EQUIPMENT. OWN THE JOB. 3 MONTH LEASE 36 AS LOW AS

$1,500*/MONTH Authorized Doosan Dealer

Optional 3 Product Conveyor

6’x5’ Double Deck Screenbox Works with 1/2 to 1 3/4 Yd. Loaders, 25 H.P. Kohler Diesel, 24” Conveyor Dumps Screened Product 9’ High, Two (2) Year Warranty! $49,900 plus freight. Other Screeners Available

508-484-5567 (BROCKTON, MA) 978-454-3320 (Dracut, MA) 603-410-5540 (Bow, NH)

Tibbits Equipment Services, Inc. www.tibbitseq.com

248-745-5828

KWIK KLEET ts Traction Clea

Specialty Construction Equipment SALES • RENTALS • HAMMERS Since 1989

• Exhaust Scrubbers • Perkins Engines • Deutz Engines • Twin Disc/Rockford Clutches

www.foleyengines.com 84” Dynapac Roller, 3447 Hrs.....$36,500

• Largest hammer repair facility in North America • Demolition tools and parts for ALL makes and models • Hammer-equipped excavator rentals • Backed by a 75 year family owned business

w Phil (413) 427-7171

CEG CORRESPONDENT

Work on the Hampden Bridge Bundle, a project that involves rebuilding eight bridges and rehabilitating a ninth bridge along a 4-mi. stretch of I95 in Hampden, Maine, is proceeding,

with Cianbro of Pittsfield, Maine, the lead contractor. The eight bridge replacements are happening on the northbound and southbound sides of the interstate at four sites between Exits 174 and 180. Three of these bridge pairs cross the Souadobscook Stream and one pair

crosses Emerson Mill Road and the Central Maine & Quebec Railway. The one bridge rehabilitation is happening at the Exit 180 off-ramp on Cold Brook Road over I-95. The work started in March 2020, when R.F. Jordan of Ellsworth, Maine,

802-479-9696

EZ-SCREEN

www.ez-screen.com

By Ken Liebeskind

CALL YOUR ONE-STOP HAMMER SHOP™ TODAY!!!

CALL 888-81-GORILLA(46745)

see MAINE page 10

Connecticut’s 108-Year-Old East Haddam Swing Bridge to Receive $58M Upgrade Connecticut will launch a two-year, $58.2 million project in the spring of 2022 to overhaul the East Haddam Swing Bridge, which carries Route 82 over the Connecticut River, connecting the town center to neighboring Haddam. Improving the 108-year-old structure is estimated to be complete sometime in the fall of 2024. The bridge totals approxi-

The bridge totals approximately 885 ft. in length. At the time it was built, the movable bridge was believed to be the largest of its kind.

mately 885 ft. in length. At the time it was built, the movable bridge was believed to be the largest of its kind. The state Department of Transportation (CTDOT) initiative is intended to improve safety and access, as well as operations for vehicles, pedestrians and bicyclists traveling on CT 82. CTDOT’s online page dedicated to the East Haddam see UPGRADE page 14

Page 2 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Call Mark Doty @ 203-823-2316 2010 WIRTGEN 2100

2013 HAMM HD12VV

2005 WIRTGEN W2000

Cat power, 6'5" 15mm drum, rigid conveyor, 60% bottoms, good belting with grade, stk# 26377 ................................................$145.000

stk# 26021, single & dual vibratory, PSI water system, recent service to engine, new seat assy, 4104 Hrs ....................................$22,500

stk# 26376, 7759 hours, Cat, 6’7” drum, good bottoms, grade controls, serviced & ready for work....................................................$115,000

2004 BOBCAT S750

2019 BOBCAT S740

2015 BOBCAT S650

stk# 26915, c/air, 2 speed, foot controls, 50% rubber, mech coupler ..........................$34,500

stk# 26515, c/air, 2 speed, 12” rubber, 76” bucket, switchable controls, 1240 hrs..$52,500

stk# 26961, c/air, 2 speed 74” bucket .............. ............................................................$42,500

2020 CASE TV450

2017 DEERE 544K-II

2014 DEERE 328E

stk# 26945, c/air, pilots, 2 speed, RC, Hi Flow, hyd coupler, 84” bucket 80% tracks ..$68,500

stk# 26200, c/air, 2 spool, Hi iz coupler and 3 yard bucket ....................................$130,000

stk# 26548, c/air, solid tires, 2 speed .............. ............................................................$23,500

See Our Complete Inventory at www.wiclark.com

Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • October 27, 2021 • Page 3

New 738 8M purpose p p e-built t h tree han ndler is BIG new ws for tree care speecialists SENNEBOGEN’s “game-changing” tree care handlerrs have raised the bar even higher! Thee new 738 M weighs in at twice the size of 718 M and R-HD models with mo models, ore power and more reach to take on bigger jobs! The 738 M, fitted d with a power grapple saw, is attached to a 75 ft. telescoping boom and stick to t quickly fell or prune trees as high as 125 1 ft. to 150 ft. tall. Then it easily cutts, swings and stacks the wood with a single operator to complete the wh hole job.

CUSTOM MENGINE EERED TREE CARE HANDLLERS

PU URPOSE-BUILT

FR ROM THE GR ROUND UP

• Ideal for all tree ser ervice operators • Used for woodlot thinning, harvesting wood fuel to clearing storm debris up to o 48" and up to 125' high • All wheel drive or tracked models • Jobsite safety increased reased with trimming, cutting, g, loading and stacking operation ns as all are done from the con nfines of the SENNEBOGEN elev evating and tilting Maxcab

As big and poweerful as it is, the 738 keeps pace with w the 718 M and 718 R-HD machines with precise handling and fasst cycle times to process up to 150 trees per day. From the roadsid de, on embankments or in heavy wood ds, the 738 M is the new game-changger for all land clearing, right-of-way right of way maintenance and heavy tree care operations.

Get th he details on the high efficienc fficiency solutio l ion for custom tree remo movall

The New 738 M

www.sennebogen ennebogen-na.com | +1-7040 347-4910

251 Shakker Road East Longmeadow, MA 01028 (800) 292-63 6351

1980 Berlin Turnpike Berlin, CT 06037 (800) 352-4473

www.tylerequipment.c t.com

Page 4 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Replacement of Cranston Bridge May Last Until Next Spring Cranston, R.I.’s Park Avenue on “what, historically, we’ve railroad bridge, the city’s pribeen able to get in terms of permary east-west connector for sonnel from Amtrak.” cars and trucks, will likely Representatives for Amtrak remain closed until at least did not immediately respond to spring 2022 due to a shortage of a Journal request for comment. Amtrak workers. Steven Paiva, a spokesperson The crossing was shut down of Cranston Mayor Kenneth J. May 15 with the goal of having Hopkins, told the newspaper it reopen in time for the new that the city had not been school year. The 115-year-old informed that work on the structure, which the Rhode bridge might stretch into next Island Department of spring. Transportation (RIDOT) He said that RIDOT officials deemed structurally deficient “were very vague last time we several years ago, is being spoke to them,” which was in demolished and reconstructed as early September. part of an $11.7-million effort. “We’re not trying to speak ill But the Providence Journal of them at all,” he added. “It’s a reported Sept. 23 that the project that needs to be done. process has been complicated And from what we are underby the fact that the bridge runs stand, Amtrak hasn’t been comover the Amtrak Northeast pletely helpful.” Corridor track. For safety rea- For safety reasons, RIDOT cannot work without the supervision of Amtrak personnel. This, coupled with Alviti said the reason the city sons, Amtrak personnel must be utility work delays, has pushed back the opening date. has not gotten any more recent present whenever construction updates is because “what we control.” Avenue bridge are being prefabricated off- told them still applies.” work is taking place. He added that it is doubtful the bridge site. Like a lot of employers, Amtrak “is feelWhile the bridge remains closed, drivers “We’re doing accelerated bridge con- are being directed to follow a six-to-10ing a pinch in the number of people they will open before the new completion timehave available,” RIDOT Director Peter line, unless Amtrak personnel begin struction, although it doesn’t appear that minute detour along Wellington Avenue Alviti told the Journal. “They’ve been “miraculously” coming back to their jobs in way,” he admitted. and Elmwood Avenue. Even under normal circumstances, conaffording us as much time as they possibly larger numbers. Local officials are making efforts to help tractors would have been required to work people navigate around the Park Avenue can, but it’s not as much as we expected What Work Can Be Done Is around Amtrak’s train schedules. But the bridge closure. pre-pandemic.” Being Done labor shortage in the region has made matAs a result, construction crews have only The Rhode Island Public Transit So far, construction crews have demol- ters even worse, Alviti said. been able to log a few hours of work each Authority (RIPTA) has been operating a ished the old bridge and relocated utilities, day — sometimes as little as 45 minutes. shuttle service for pedestrians, and RIDOT Cranston Anxious Alviti said that it is hard for RIDOT to and have now moved on to the foundation is funding an extra school bus to take stufor Completion predict just when the bridge will be able to work, Alviti disclosed to the Providence dents to Park View Middle School. RIDOT planned the project before the reopen because the availability of Amtrak news source. To speed up the process, he “Obviously, we all want it to be done as workers is “a variable that is not within our noted, substantial portions of the Park pandemic hit, and based its expected finish quickly as possible,” Paiva said. 

Maine’s Darling Marine Center Waterfront Project Under Way University of Maine President Joan Ferrini-Mundy and U.S. Assistant Secretary of Commerce for Economic Development Dana Gartzke recently visited Walpole, Maine, for a tour of the Darling Marine Center (DMC), a waterfront infrastructure improvement project that began earlier this year. The tour, led by DMC Director Heather Leslie and DMC Laboratory Manager Timothy Miller, supplied an overview of the project, which will upgrade the center’s flowing seawater system, renovate its oldest seawater laboratory and replace its 50-yearold main pier. The improvements are funded by an award from the U.S. Economic Development Administration with matching

funds from UMaine and state marine bond funds. The construction will be substantially complete by Jan. 1, 2021, with only a few docks left to be built, according to the DMC. Prock Marine and The Penobscot Company, both Rockport, Maine-based companies, have the primary contracts for the project. Together, the two firms have tapped local electricians and other tradespeople to execute the complex project, which requires installing a flowing seawater system — which acts as the circulatory system of the marine laboratory. This system can sustain thousands or millions of marine organisms, depending on the experiments that DMC scientists and their partners are conducting.

“Amid all the challenges people are facing right now, we’re grateful for the support of the state and federal government to undertake this project,” said Ferrini-Mundy. “These improvements will enable the Darling Marine Center and University of Maine more broadly to better serve the people of Maine.” DMC researchers are helping the state’s marine fisheries and aquaculture sectors adapt, diversify, and grow in response to changing environmental conditions. Scientists and students based at the DMC conduct applied research and work collaboratively with marine industry professionals to develop new value-added marine products and bring them to commercial scale. DMC researchers and industry partners

also provide on-the-job training and experience to university students, the next generation of marine science professionals. When completed, the upgraded infrastructure will benefit faculty, students and the center’s partners: fishermen, aquaculture entrepreneurs, marine industry professionals and community members through collaborative research, workforce development and business incubation programs. “Maine’s fisheries and aquaculture industries depend on healthy coastal and oceans,” said Leslie. “Understanding these connections between people and oceans, and how they are changing is central to our work at the DMC. We thank the U.S. Economic Development Administration and all those who are supporting this important project.” 

Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • October 27, 2021 • Page 5

Page 6 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

The Nice Company, Inc

9 Rosenfeld Drive, Hopedale, M A Toll Free# 508-381-3939 • w w w.theniceco.com

Equipment Sales and Rentals

We sell NICE machines!

2002 CAT D8R, New Engine, 80% UC, Recent Equalizer Bar, Work Ready $169,000 Firm

2011 Volvo L350F, 9700 hours, spade nose, Runs Good, Very Clean Machine Reduced to $219,000!

2014 Vermeer FT300, 2500 hrs., Mulcher, Cab w AC, Industrial 30XL Winch, Rear View Camera $189,000

2016 Volvo EC350EL, 4500 hours, Aux. Plumbing, 12’ stick, 65” bucket $129,000

Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • October 27, 2021 • Page 7

PAYMENTS S AS LOW AS $9 99 A MONTH* THE SNOW LEASE IS BACK. Ma ake higher lease payments in the winter while you’re y turning cold wet snow into cold hard cash. Keep your machine working g year round with lowered payments the other 7 months of the year as low as $99 a month. *All applications are subject to credit review and approval. Security deposit may be requuired based on applicant’s credit. Five (5) “ON-SEASON” (November - March) increased payments and seven (7) “OFF-SEASON” F-SEASON” (April - October) reduced payments per year based on 5-year/5,000 hour lease terms. First payment d in due i advance d andd mustt be b an “ON-SEASON” “ON SEASON” payment.t Minimum Mi i “OFF SEASON” payment is $99 + applicable taxes. Offer valid only on specific models. Offer may change without prior notice, and additional “OFF-SEASON” ti l terms t andd conditions ditions may ma apply. l Call for f complete l t details.

800-Go2-ALT TA A | AltaEquipNE.com

Page 8 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

2021 MCCLOSKEY SDX130: Hours: Serial Number: 90666, New Telescoping Stacker 36"x130' Electric Hydraulic Power WEG 20HP. Standard Hopper, Pivot Point, Hydraulic Landing Gear, Hydraulic Wheel Drive, Remote Greaselines, Walking Beam w/Lift Axle >>>Call

2021 MCCLOSKEY 512R-T: Hours: 11, Serial Number: 91834, Hydraulic Tipping Grid, Safety Beacons, Remote Start/Stop Feeder, CAT 3.4L Tier 4Final 74HP >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY ST80T: Hours: 66, Serial Number: 91768, Hopper Wear Plates, Impact Idlers under Hopper, Upgraded Belt Cleaner/Scraper. CAT 3.4L Tier 4 Final 74HP >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY C3: Hours: 1166, Horsepower: 510 hp, Serial Number: 91189, METSO designed cone, 300 HP Class. Volvo D13 Medium Cone Liner currently installed.>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY R155: Hours: 224, Serial Number: 91711, Extended Tail Conveyor, Twin Drive on Tail, Remote Variable Speed Feeder. CAT Tier 4F 130HP Engine >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY R155: Hours: 342, Serial Number: 91421, Long hopper feeder. Remote stop/start feeder. CAT Tier 4F 130HP >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY S190 3D: Hours: 343, Horsepower: 130 hp, Serial Number: 91405, Tracked Triple Deck Heavy Duty Screener. CAT Tier 4F Engine. 15ft Feeding Hopper. Chevron Belt on Main Conveyor. Remote Machine Shut Off >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY J45: Hours: 522, Serial Number: 91695, Crusher with pre-screen. Volvo D11 Tier 4F 360HP Engine>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY 516R-T: Hours: 116, Serial Number: 91830, Radial Conveyor. Hydraulic Tipping Grid over Hopper. Remote Stop/Start Feeder. Fitted Safety Beacons. CAT 3.4L Tier 4 Final 74HP >>>>>>>>>>>>>>>Call

2021 MCCLOSKEY ST80TLA: Hours: 51, Serial Number: 91780, 36" x 80' Tracked Stacker with Radial Lift Axles. Wireless Remote. Hopper Wear Plates, Impact Idlers under Hopper, Belt Cleaner/Scraper. Custom Paint - Black>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2018 MCCLOSKEY C44: Hours: 1227, Serial Number: 89103, Metal detector on feeder, twin oil coolers, wired/wireless track remote. Powered by a Tier 4 Volvo D13 Engine. Ready to Run >>>>>>>>>>>>>>$579,500

2021 MCCLOSKEY 621RE: Hours: 159, Serial Number: 91827, Trommel with Aux Drive Circuit. 8' Extended Overs >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MWS 3625T: Serial Number: 20350, Washing 2021 MCCLOSKEY ST100T-LA TRACKED STACKER: Screw Twin 36" Spiral Shaft. Control Panel for Screw Hours: 717, Serial Number: 91551 Cat 3.4B T4F 74HP. and Stacker >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call Hopper Wear Plate, Impact Idlers Under Hopper, Upgraded Belt Cleaner/Scraper, Radial Lift Axle with Wireless Remote >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY C2: Serial Number: 92045, New 2021 C2 Tracked Cone Crusher. Metal Detector on Feeder, Medium Liner, Volvo D11 Tier 4F 360HP >>>>>>>>>>>>>Call

NEW MWS CSP200 COMPACT SAND PLANT, Serial Number: 20349, cost and energy efficient, exceptional performance, 14 x 6 dewatering screen, can produce 1 grade of sand, self regulating sump tank>>Call

NEW ENGLAND’S EXCLUSIVE MCCLOSKY DEALER!!!

Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • October 27, 2021 • Page 9

Wo ork harde der in confined ar a eas. The near-zero reduced tail swing on the DX235LCR-5 excavator lets you work closer to buildings and in confined areas without sacrificing performance. Ideal for working on congested jobsites including roadways and rail lines; it won’t block traffic in the adjacent lane or track. The long carriage track design offers exceptional performance in all operating conditions, including heavy digging operations. Experience the strength of Doosan. Stop in ffo or a demo.

Doosan® and the Doosan logo are reg istered t r ademar k s of Doosan Cor p. in the United S t a t e s a n d v a r i o u s o t h e r c o u n t r i e s a r o u n d t h e w o r l d . 1 8 - D 0 0 3. 8

Au thor ized Doos an De aler

196 Manley St. • Brockton, MA 02301 • 508-484-5567 61 Silva Lane • Dracut, MA 01826 • 978-454-3320 61 SilvRte a La3A ne •• D racutNH , MA• 0603-410-5540 1826 1474 Bow, 978-454-3320 • w w w.equipmenteast.com www.equipmenteast.com

Equipment East

Page 10 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Eight Bridge Replacements Mark Maine I-95 Project

Protective shielding is installed and blocking points are being laid out for the deck formwork at northbound EMR/CMQR bridge. MAINE from page 1

did all the associated earthwork for the permanent and temporary bridges. “We have installed close to 200,000 cubic yards of aggregates to the temporary diversions on the northbound bridges alone,” said Barbara Jordan, an executive at the company. The company used Volvo excavators, a Cat and Komatsu Federal funds are covering 88 percent of the cost of the $44.8 million project, with state funds covering the dozers, Ingersoll and Volvo rollers and remainder. Cat 120M grader on the project. The grader and dozer are equipped with crawler crane. We’ve begun installing Topcon 3DMC Machine Control. The formwork and rebar at our southbound company also has used a Level-Best stream bridge abutments and will be Box Blade with Topcon 3DMC placing concrete at each of those over Machine Control and excavators with the next few weeks. Topcon 3DMC Indicate systems. We will also finish up on the north“The Hampden Bridges team is curbound Emerson Mill Road bridge in the rently working on three southbound coming weeks and will swap traffic on stream bridges and finishing up the to this bridge at the end of September. northbound Emerson Mill Road “We’ve been using the new Link-Belt bridge,” said Andrea Pelletier, commucrane along with an APE D30 diesel nications manager of Cianbro. hammer for driving H-pile,” she added. “We have recently completed and “We’ve also been using an 80-ton swapped traffic on to the three northrough-terrain hydraulic crane and a 30bound stream bridges. We then swapped ton boom truck for various activities southbound traffic on to the temporary around the job site.” diversions and completed demolition of Two of the other subcontractors on the old stream bridges. We’re in the the job are H.B. Fleming of South process of driving H-Pile for the new Portland, Maine, that is performing permanent abutments with a new Link- The eight bridge replacements are happening on the northbound and southbound sides of pile work to support the bridges, and Belt 228 HSL 130-ton lattice boom the interstate at four sites between Exits 174 and 180. see MAINE page 12

Crews pave the top lift of roadway surface at the northbound East Bridge.

Concrete deck placement using a Terex Bid-Well deck finishing machine at northbound East Bridge.

Crews pave the base HMA at northbound Center Souadabscook Stream bridge.

Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • October 27, 2021 • Page 11

ROCK SOLID SERVICEžWE CRUSH YOUR ROCKS

140 Nutmeg Road South South Windsor, CT 06074 51 Veterans Drive Loudon, NH 03307 LARGEST DEALER IN NEW ENGLAND

THE MOST MATERIAL HANDLING MACHINES IN NEW ENGLAND SCREENING CRUSHING CONES IMPACTORS CONVEYORS TROMMELS WASHING RECYCLING

SCREENING

I M PAC T O R S

TROMMELS

USED AND NEW MACHINERY RENTALS AND FINANCING AVAILABLE

CONVEYORS

CRUSHING

1-800-53 CRUSH

Over 100 Machines in Stock

CALL TODAY! 1-800-53-CRUSH

W W W. P O W E R S C R E E N - N E . C O M Family Owned and

Operated for over 20 years

Call for Parts Today

ROCK SOLID SERVICEžWE CRUSH YOUR ROCKS

Page 12 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Monroe Tractor Names Parts Manager for Conn. Location Mike Uricchio has been promoted to parts manager of Monroe Tractor’s South Windsor, Conn. Uricchio has previous experience as a service technician at a local equipment dealership. Shortly after, in 2018, he accepted a parts counter position at Monroe Tractor’s Connecticut store and recently was promoted to parts manager. Uricchio will continue to work closely with customers and vendors providing customers with over-the-counter parts assistance. “I am excited to expand on what we have built here in Connecticut,” said Uricchio. “I pride myself on providing a first-class experience for our customers and look forward to my new role as parts manager.” “I am very pleased that Mike has stepped into this management position,” said Chris Reseska, branch manager. “He has proved time and time again that hard work and a positive attitude always pays off. And as Connecticut’s only Case dealer, we know Mike will be there to help keep our customers working.” With 14 locations across New York State, Massachusetts, Rhode Island, Connecticut,

Mike Uricchio

and Vermont, Monroe Tractor offers a full line of Case construction equipment as well as demolition attachments. It also is a Women’s Business Enterprise. For more information, visit www.monroetractor.com. 

Cianbro Leads Hampden Bridge Bundle Project in Maine MAINE from page 10

Eurovia-Northeast Paving/Bangor, Maine, which is performing pavement work. The Hampden bridges are approximately 60 years old and approaching the end of their useful lives. The new structures will include non-corrosive materials to reduce future maintenance needs and the bridges over the Souadabscook Stream will be single-span structures to eliminate the need for piers in the water, accord- Hot rubberized coated stone is added ing to the Maine Department of over the rubber and steel plates. This Transportation. type of joint is called an Asphaltic Plug Temporary diversion roadways Joint and allows up to 2-in. of movement and bridges will be constructed in for the bridge at each end due to loadthe median of I-95 to maintain two ing and thermal cycling. travel lanes in each direction throughout the majority of this project, roadway while construction apply hydroseeding to the slopes at according to Maine DOT. After the diver- occurs on the southbound bridges. Workers bridge prior to opening. sions have been constructed, the north- Once the southbound bridges are bound traffic will be moved to the median complete, southbound traffic will roadway while the northbound bridges are move onto the new bridges, and removal of Most of the northbound bridge work will be under construction. Once the new north- the median roadways and bridges will completed in 2021, and southbound bridge work will be completed in 2022. bound bridges are complete, northbound begin. Median work started in February 2020 Construction will be complete by November traffic will move onto the new bridges, and southbound traffic will move to the median and continued through the rest of the year. 2022.

northbound East Souadabscook Stream

Federal funds are covering 88 percent of the cost of the $44.8 million project, with state funds covering the remainder, according to Maine DOT spokesperson Paul Merrill.  CEG

Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • October 27, 2021 • Page 13

Get an “A” with Hyundai

Hyundai Construction Equipment is excited to announce the launching of our new A-series machines. Along with a new look, these machines are packed full of standard new features and benefits to get the job done efficiently. • Cummins Performance Series Engines Stage V emissions compliant engines • No EGR (Exhaust Gas Recirculation) Improved fuel consumption • Smart Power Mode 3-5% fuel savings in high load work • New engine hood design Enhanced visibility to rear of machine

More standard features. More value.

www.hceamericas.com To learn more about the what the new Hyundai A-Series machines can offer your business, contact your Hyundai dealer today. Chappell Tractor 251 NH-125 Brentwood, NH 03833 603/642-5666

454 RTE 13 Milford, NH 03055 603/673-2640

www.chappelltractor.com

391 Loudon Rd. Concord, NH 03301 603/225-3361

Kahn Tractor & Equipment, Inc.

Lorusso Heavy Equipment, LLC

Quality Fleet Service, Inc.

520 Pond Road North Franklin, CT 06254 860/642-7596 www.kahntractor.com

160 Elm Street Walpole, MA 02801 508/660-7600 www.lhequip.com

548 New Ludlow Road South Hadley, MA 01075 413/213-0632 www.qualityfleetservice.com

Whited Equipment Co. 2160 Hotel Road Auburn, ME 04210 207/346-0279

837 Portland Road Saco, ME 04072 844/430-6810

www.whitedtruck.com

Page 14 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

NEW ENGLAND SUPPLEMENT ADVERTISER INDEX ALTA EQUIPMENT COMPANY/NITCO LL ......................7 ARGUS INDUSTRIAL COMPANY ....................................1 BARRY EQUIPMENT CO. INC. ......................................16 BOSTON FREIGHTLINER/NEW ENGLAND....................5 EQUIPMENT EAST ........................................................1,9 FOLEY INC - WORCESTER ............................................1 GORILLA HAMMERS........................................................1 HYUNDAI CONSTRUCTION EQUIPMENT....................13 J R VINAGRO CORPORATION........................................1 M G EQUIPMENT ............................................................1 POWERSCREEN NEW ENGLAND ................................11 ROCK & RECYCLING EQUIPMENT LLC ........................8 ROGERS BROTHERS CORPORATION ........................15 SHAWMUT EQUIPMENT CO INC ..................................12 T-QUIP SALES & RENTAL INC ........................................6 THE N.I.C.E. COMPANY ..................................................6 THE W. I. CLARK COMPANY ..........................................2 TIBBITS EQUIPMENT SERVICES INC ............................1 TYLER EQUIPMENT CORPORATION ............................3 The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

Built in 1913, East Haddam Swing Bridge to Receive Overhaul UPGRADE from page 1

Bridge overhaul noted that the work will “include a major rehabilitation of the bridge to extend service life, improve roadway rideability for traveling public and improve swing span operation reliability.” The bridge was built in 1913 and rehabilitated in 1988, 1998, 1999 and again in 2007. Due to significant swing span operation problems, an emergency repair project was completed in 2016. Inspections by CTDOT’s Bridge Safety and Evaluation unit have determined that the bridge is in poor condition, primarily due to the deterioration of its superstructure, CTDOT noted on the structure’s project page at the agency’s website. When completed, the rehabilitated bridge will maintain a safe crossing of the river for vehicular and pedestrian traffic. The overall project’s limits begin on the west side of the Connecticut River at Little Meadow Road, continue over the bridge, and end west of the Goodspeed Opera House in East Haddam. The Middletown Press reported that CTDOT Supervising Engineer Derick Lessard said in an August meeting of the Middletown County Chamber of Commerce Haddam & East Haddam Division that the transportation department is taking into consideration surrounding businesses that will be affected by the work. He told the newspaper that a residential driveway at Little Meadow Road and CT 82 will be used for equipment staging, with another to be built on the southern part of the same homeowner’s property. Part of the bridge overhaul will be conducted during peak boating season, Lessard said, but noted that CTDOT will always provide passage for boats to go underneath the structure. That includes smaller vessels that

can fit under the span without the bridge needing to pivot. Boat traffic presently flows under Span Three of the East Haddam Bridge, but he said that “there are times during this process when the navigation channel will have to be closed,” which will temporarily redirect vessels traveling on the river to cross under Span Four. The project calls for floor beam and deck replacements on its first two spans, as well as bearing and joint replacements, substructure repairs, a full replacement of the electrical system and upgrading the mechanical system, which will make the swing operation “more viable,” Lessard said. In addition, a 6-ft. sidewalk will be added on the southern side of the bridge. Lessard anticipates there will be a 20 percent reduction in the swing span “cycle” time once construction is complete, the Middletown News reported. “There will be some hang-ups and problems,” Chamber President Larry McHugh said at the August meeting, but added, “we will work those problems out.” He described the East Haddam Bridge upgrade as a “very, very important” project, the Middletown news source said. Signs will be posted in the surrounding area warning motorists of the bridge project in advance of the project next year, including at the intersection of CT 151/82 and the crossing at CT 82/54, according to CTDOT. At least a 14-day closure notice will be posted for any construction, explained Lessard. Like work on the Arrigoni Bridge, the next span upstream in Middletown, there will be alternating one-way traffic 24 hours a day during the project timeline, he noted, adding that the East Haddam construction will continue throughout the year, even during the winter. 

Chadwick-BaRoss Announces Acquisition of J.F. McDermott Chadwick-BaRoss Inc. (CBR), has completed the acquisition of J.F. McDermott Corp. (McDermott), a Whitman, Mass.based distributor of equipment to the water and waste water industries. Under the announced deal, all of McDermott’s employees will be joining CBR, under the leadership of CBR President Jim Maxwell. Financial terms of the deal were not disclosed. “We are pleased to be able to welcome J. F. McDermott’s staff and lines of business as they join the CBR team, becoming our ninth location in New England,” said

Maxwell. “McDermott’s business and expertise, as well as their long tradition of excellence in customer service, will be an outstanding complement to CBR’s existing operations and growth strategy as a leader in heavy equipment sales, leasing, renting, and servicing in the New England market. We’re excited about the possibilities and relationships we can build upon for McDermott’s customers, and look forward to continue serving them in an expanded fashion.” For more information about ChadwickBaRoss, visit www.chadwick-baross.com. 

Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • October 27, 2021 • Page 15

TRAILERS TO MEET EVERY HAULING CHALLENGE! Committed to building superior quality, reliability and durability into every trailer.

ROGERS BROTHERS CORPORATION ALBION, PA

The Ultimate in Trailers®

Tyler Equipment 251 Shaker Road East Longmeadow, MA 01028 (413) 525-6351 • (800) 292-6351 Parts: (877) 255-6351

1980 Berlin Turnpike Berlin, CT 06037 (860) 356-0840 • (800) 352-4473 Parts: (860) 356-0848

C.N. Wood Co., Inc. 200 Merrimac St. Woburn, MA 01801 (781) 935-1919

140 Wales Ave. Avon, MA 02322 (508) 584-8484

60 Shun Pike Johnston, RI 02919 (401) 942-9191

www.cn-wood.com

www.tylerequipment.com

For more than 110 years, ROGERS® trailers have stood above the rest in rugged durability, unsurpassed quality and superior design. Contact your local dealer for a quote today.

Page 16 • October 27, 2021 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

SOLD NEAR N YOU.

Your Y our local D Doosan® dealer is you ur source ffor or sales, par a ts and service.

Learn more at doosanequipment.c . om

Doosan® and the Doosan a logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2021 Doosan Infracore North America, LLC. All rights reserved.