Northeast 11, May 26, 2021 by Construction Equipment Guide

Published Nationally Northeast Edition

® May 26 2021 Vol. LXIII • No. 11

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Century-Old Bridge Over Passaic River Set to Be Razed Sen. Graham Visits Mauldin Paving…8

Students Tour Robert H. Finke & Sons Facility…18

Construction crews in Paterson, N.J., have begun work to replace a more than 100-year-old structure that’s carried thousands of vehicles per day.

By Cindy Riley CEG CORRESPONDENT

Volvo Delivers ‘Factory for Tomorrow’…26

Construction crews in Paterson, N.J., have begun work to replace a more than 100-year-old structure that’s carried thousands of vehicles per day. Fair Lawn Avenue Bridge has served the

Truck & Trailer Section 79-86 Attachments Section ..87-94

Holes On Job Sites Can Sometimes Be Overlooked Safety Hazards By Lucy Perry CEG CORRESPONDENT

Business Calendar ............98 Auction Section ......100-109 Advertisers Index ............110

The existing structure, also known as the Fifth Avenue Bridge, has served two narrow lanes of traffic over the Passaic River at the border between the borough of Fair Lawn in Bergen County and the city of Paterson in Passaic County. see BRIDGE page 48

Falling Through the Cracks

Table of Contents ................4 Aggregate and Recycling Section ..........................59-78

community well, but time has run out for the aging, outdated overpass. “The existing bridge was structurally deficient and functionally obsolete,” said Neela Mahbuba, public information officer of Passaic County. “The bridge was load posted for three tons.”

Deaths from falls lead fatalities in construction. Construction workers just as often die from fall-through hazards as they do from work at elevations. In 2018, OSHA logged the pre-

ventable deaths of 320 workers. This year OSHA’s National Safety StandDown to Prevent Falls in Construction showcases the critical need for safety precautions both around holes and at height. see CRACKS page 34

Page 2 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

QUALITY USED EQUIPMENT VALUE V ALUE & PERFORMANCE ASSURED

2018 CATERPILLAR 982M, 5749 HRS, S/N: K1Y01756........$367,000

2018 CATERPILLAR 982M, 6554 HRS, S/N: K1Y01748........$333,500

2017 CATERPILLAR 336FLXETCG, 2092 HRS, S/N: DFY10016..$250,000

2015 CATERPILLAR 988K, 19,751 HRS, S/N: TWX00615 ......$239,000

2015 CATERPILLAR M320F, 1490 HRS, S/N: F2W00327 ......$183,500

2016 CATERPILLAR 335FLCR, 4795 HRS, S/N: KNE00435 ......$165,000

2019 CATERPILLAR CB13, 1027 HRS, S/N: PWP00221 ......$129,000

2015 CATERPILLAR CB54B, 1114 HRS, S/N: RJN00186 ......$100,000

2018 CATERPILLAR 246D, 165 HRS, S/N: BYF04597 ................$43,500

2019 CATERPILLAR 262D, 152 HRS, S/N: DTB09831 ................$42,500

Used Parts • Quality Parts • Attachments Are you looking for a reliable source for quality used components and parts? Outback Parts is linked nationwide with three used parts networks, so finding dependable parts fast and conveniently is never a problem. Outback Parts also supplies replacement parts for Non-Cat® machines. So when you’re needing parts, call or visit us on-line. 2019 CATERPILLAR 262D, 370 HRS, S/N: DTB09827 ................$42,500

2017 CATERPILLAR 236D, 572 HRS, S/N: BGZ03700 ................$33,500

2006 CATERPILLAR CB434D, 1017 HRS, S/N: CNH00515 ........$23,500

Call: 732/885-3005 Fax: 908/995-7522 jmeyer@foleyinc.com

www.outbackparts.com

ASK ABOUT OUR FLEET RESTRUCTURING OPTIONS. WE CAN HELP WITH ONE MACHINE OR THE ENTIRE FLEETT..

Visit our Used Equipment Center! 74 Route 33 East Monroe Township, NJ 732-417-7040

732-417-7109 Piscataway, NJ; Hammonton, NJ; Bensalem, PA; Whitehall, PA; Bearr,, DE WWW.FOLEYINC.COM/USED

JOE VILLA International & Domestic Used Equipment Sales & Purchasing

JVILLA@FOLEYINC.COM 267-990-8161

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 3

IT’S THE DOWN-T W O-EARTH APPRO A ACH. Yo ou’ll find everything you n need at JESCO - the equipment, the parts, the service and the people who can answer yourr questions and make things work.

Integrity. Commitment. Honnesty. Expertise. JESCO strives to bee everything you’re looking for in a company. Yo ou can depend on us. Whether yoour job is to construct, d demolish, li h pave or grade, d JEESCO delivers d li wha h t you need. d

www.jesco.us

800-241-7070

Page 4 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SEN. LINDSEY GRAHAM VISITS MAULDIN PAVING PRODUCTS

CONSTRUCTION INDUSTRY VETERAN DUDLEY SUTTON DIES AT 80

Dudley Sutton, 80, of Clay, N.Y., died April 25, 2021. He worked almost his entire career in the construction equipment industry. He started in the 1970s with The Dow Company in western New York State.

BOEING TO GIVE VIRGINIA TECH $50M GIFT TO BUILD NEW CAMPUS

NEW AEM INITIATIVE TO HARNESS POWER OF GRASSROOTS SUPPORTERS

The AEM launched a new Action Hub to help its tens of thousands of grassroots supporters share the industry’s story with lawmakers and positively influence legislation that impacts the equipment manufacturing industry.

DOOSAN BOBCAT DEVELOPS NEW MOBILE TRAINING LAB

To meet the growing demand for skilled welding professionals, Doosan Bobcat has developed a mobile training lab, currently based in Litchfield, Minn. It will be traveling throughout Doosan Bobcat’s North America factory locations.

Among the biggest challenges the industry faces is a severe shortage of technicians, specifically an extremely low number of young people willing to train to fill the positions that are open.

JCB is looking for talented and ambitious team members who have achieved or are currently pursuing their diesel mechanic certificate to join its diesel mechanic apprenticeship program.

CAPITAL REGION BOCES TOURS ROBERT H. FINKE & SONS FACILITY

LAS VEGAS RAIDERS SELECT CONTRACTOR’S SON IN NFL DRAFT

EXCAVATION COMPLETE ON NEBT PROJECT IN WASHINGTON, D.C.

Excavation of the Northeast Boundary Tunnel (NEBT) in Washington, D.C., a joint-venture project valued at $580 million being constructed by The Lane Construction Corporation and its parent company, Webuild Group is complete.

VOLVO CE DELIVERS ITS VERSION OF ‘FACTORY 4 TOMORROW’

Founder, Publisher & CEO Northeast Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

TRANSPORTATION BIZ BRINGS 30-YEAR EXPERTISE TO NICHE SERVICE

ITEMS AT AUCTION IN PA.

Quarrick Equipment & Auctions held an auction May 6 at its Uniontown, Pa., auction facility and equipment yard. The auction attracted a large crowd of onsite attendees from Pennsylvania and surrounding states.

AGGREGATE PRODUCTION & RECYCLING SECTION

68 68 76

MB CRUSHER HELPS EVERY SITE BECOME RECYCLING CENTERS

POWER MEETS PORTABILITY IN MCCLOSKEY’S NEW I4C CRUSHER CAT MH3250, MH3260 MATERIAL HANDLERS SET NEW STANDARD

METSO OUTOTEC DEBUTS NEW IDENTITY ACROSS WHOLE OFFERING METSO OUTOTEC LAUNCHES HORIZONTAL GRINDING MILLS

POWERSCREEN RESPONDS TO DECARBONIZATION CHALLENGE

DEPARTMENTS

98 BUSINESS CALENDAR 100 COMING AUCTIONS

EQUIPMENT

87 94

RIDE-ON Trencher Attachments KOMATSU Hydraulic Breakers

Edwin M. McKeon Jr.

Kent Hogeboom

Ed Bryden

Joshua Phillips

• New Jersey • Eastern Pennsylvania • Northern Maryland • Delaware

• New York • New England • Northern Pennsylvania

• West Virginia • Western Pennsylvania

• National • Central Pennsylvania

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

JCB ANNOUNCES DIESEL MECHANIC APPRENTICESHIP PROGRAM

104 QUARRICK SELLS THOUSANDS OF

The Fourth Industrial Revolution is occurring at a speed that has never been seen before. For Volvo Construction Equipment, it’s an opportunity not only for digital transformation, but to build a future that we all want to live and work in.

Virginia Tech will receive $50 million from Boeing, the world’s largest aerospace company, to go toward financial aid to build and diversify the graduate technology campus the university is developing in Alexandria, Va.

Circulated Throughout • New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

IN THIS ISSUE

NORTHEAST EDITION

YouTube

215/885-2900 215/760-6641 tmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from

Cell e-mail

315/725-5726 jphillips@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 5

YOUR NEEDS. UNE N ARTHED. Building your con nstruction business togeth her. Our G-Series Compact Excavators E may be VPDOO EXW WKH\ŤUH IXOO RI ELJ LGHDV IURP FRQWUUDFWRUV DQG ƠHHW PDQDJHUV OLNH \RX )RU H[DPSOH D ZLGHU HQWU\ZD\\ ,PSURYHG YLVLELOLW\ $ WKLUG VHUYLFH GRRU IRU HDVLHU PDLQWHQDQFH DQG FRROHU FOHDQLQJ $QG D GHSHQGDEOH QR IXVV )LQDO 7LLHU HQJLQH <R <RX DVNHG IRU PDFKLQHV WKDW DUH RSHUDWRU IULHQGO\ S \ GHSHQGDEOH S DQG HDV\\ WR PDLQWDLQ P :H PDGH VXUH WKHH * 6HULHV GHOLYHUV 6HH IRU \RXUVHOI DW \RXU GHDOHU RU DW -RKQ'HHHUH FRP H[FDYDWRUV

:( 2))(5 )/(;,%/( 5(17$/ 385&+$6( 7(506 DYDLODEOH WKURXJK -RKQ 'HHUH )LQDQFLDO

."$)* /&4 "7"* -"#-& '03 %"* : 8&&,: "/% .0/5): 3&/5 "-4 "%54 #"$,)0&4 $3"8-&3 %0;&34 $3"8-&3 0"%&34 &9$"7"5034 0/( 3&"$) &9$"7"5034 .* /* &9$"7"5034 4,* % 45&&34 8)&&- 0"%&34 "/% .65* 1-& "55 "$).&/54

/(%$121 3$

( &80%(5/$1' 67

%(7+/(+(0 3$

6(//(569,//( 3$ 67$7( 5'

3/$67(5(5 (48,30(17 &2 ,1& ZZZ SODVWHUHU FRP

672.( 3$5. 5'

/(:,6%(55< 3$ /2:7+(5 5'

Page 6 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 7

HITACHI ZW30

A FULL LINE OF WHEEL LOADERS • 14 Models • 25 HP – 512 HP HITACHI ZW120-6

REPUTATIONS ARE BUILT ON IT

HITACHI ZW80

IN STOCKd! an at All Isl HITACHI ZW370-6

Hitachi Construction Machinery Loaders America Inc. | HitachiCM.us

HITACHI ZW250-6

631/643-2605 www.allislandequipment.com follow us on Instagram

Serving Nassau, Suffolk and the Five Boroughs

STILL FAMILY OWNED & OPERATED SINCE 1970

Page 8 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sen. Lindsey Graham Visits Mauldin Paving Products “…construction has to be the meat and potatoes of any infrastructure bill.” Lindsey Graham U.S. Senator (S.C.)

By Eric Olson CEG CONTRIBUTING EDITOR

South Carolina Republican Sen. Lindsey Graham visited the Mauldin Paving Products manufacturing facility in Greenville, S.C., on May 17 to discuss President Biden’s proposed $2.1 infrastructure bill designed to, among other things, build better, safer roads and bridges nationwide. After discussing the issue with company owners and other South Carolina members of the Association of Equipment Manufacturers (AEM), Graham was given a tour of the plant before making brief remarks on the factory floor to Mauldin Paving employees and members of the media. “I have met with some Democratic colleagues, and I don’t think we can pass a $2 billion bill, but an $800 million to $900 million package that is tailored toward construc- South Carolina Republican Sen. Lindsey Graham visited the Mauldin Paving Products manufacturing facility in Greenville, S.C., tion,” he said. “I am all for building up our on May 17 to discuss President Biden’s proposed $2.1 trilhigh-speed internet capabilities, but con- lion infrastructure bill designed to, among other things, struction has to be the meat and potatoes of build better, safer roads and bridges nationwide. any infrastructure bill.” Graham added that he was “hopeful” Congress tory floor. The long-time U.S. senator from South would pass the infrastructure bill in the next 60 to 90 Carolina, one of the most powerful politicians in days. His belief is that it would generate a lot of eco- Congress, also asked questions during the meeting nomic activity for the United States and help the and listened to Calder’s concerns. The company has been a member of AEM for 30 years. country continue to recover from COVID-19. Glen Calder, vice president of operations of “If it does pass, it will be done on a bipartisan basis and if it does not, it would be a great missed opportu- Mauldin Paving, explained to Graham that Mauldin nity,” he remarked. “There are enough Republicans Paving produces a range of asphalt pavers, road mainwilling to work with Democrats to get this done if tainers, asphalt rollers, motor graders, truck mounted President Biden will sit down and work through the tank products and trailer mounted liquid asphalt/emulsion tanks from its expansive new facilidetails. He elicited cheers from the Mauldin Paving factory ty in Greenville. “We start with raw steel, then cut, bend, weld, paint workers, many of whom are machine assemblers and welders, when he said, “if we can pass an infrastrucsee MAULDIN page 96 ture bill, get ready for overtime.” AEM Members Discuss Issues With Graham The AEM has been working with Graham to put construction at the heart of President Biden’s infrastructure bill. Graham was invited to discuss the proposed legislation with executives at Calder Brothers Corp., the owner of Mauldin Paving, prior to his talk on the fac-

After discussing the issue with company owners and other South Carolina members of the Association of Equipment Manufacturers (AEM), South Carolina Republican Sen. Lindsey Graham was given a tour of the Mauldin Paving plant before making brief remarks on the factory floor to employees and members of the media.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 9

are ar re en now AL LTA EQUIPMENT COMP OMP PANY ANY IS ONE OF THE BIGGEST T,, F FASTEST ASTE EST GROWING EQ QUIPMENT DEALERS S in the United States. Choose fro om a gre eater variety of quality eq quipment manufacturers, e rest e assured with morre experienced and knowledgeable se ervice techs, and enjoy superior parts availability ty with a support network that re esults in more uptime for your business. W We e look forward to growing o with you and being there for yo ou every step of the way. WE ARE AL LT TA EQUIPMENT UIPMENT COMP PANY ANY Y. SY YRACUSE

ALBANY

BATA AV V IA

59885 Court Street Road Syrracuse, NY 13206 8333-NY--ALLTTA-1 8333-692-5821

17 Northway Lane Latham, NY 12110 833-NY-ALLTTA-2 833-692-5822

4554 West Saile Drive ve Batavia, NY 14020 833-NYY-AL -ALLTA-3 833-692-5823

Call us at 833-Go2-ALT LTA or visit us online at AltaEquipNY Y..com

Page 10 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MOVING RIGHT ALONG No interruptions, no hiccups – it’s business as usual for you, with compressor rentals from Milton CAT. • Contractor, high-pressure and instrument-quality models. • Range from 2 hp to 500 hp. • Portable models from 185 cfm to 1,600 cfm; up to 500 psi. • Diesel and electric models. • Meeting all emission requirements. • After-cooler, sound-attenuated enclosures available. • Prices to fit all budgets. • Expert service and support.

Generators, Compressors, Chillers

800-821-6412

Construction Lineup L Durable Kubota engines

Upgraded tech & features

POWERFULL. DEPEND DABLE. ABLE. RELIABLE. NOW THA AT’S T’S A HARD-WORK HARD-W KING CREW W.. Stop by for a closer look at our complete com construction lineup. Ma^ phke] l * lêebg` \hfiZ\m \ ^q\ZoZmhk _hk ho^k *. r^Z Zkl# • Powerful,, comfortable new SVL97-2 track loader FZg^no^kZ[e^% abà&obllb[bebmr% abà i^k_hkfZg\^% g^p K/-) pa^ê ehZ]^k

*Accordingg to 2019 data from Off-Highway Research includingg all Kubota Groupp brand sales. © Kubota Tractor Corpporation, 202 021. This material is for descriptiv p e ppurpposes only. Kubota disclaims allll representations and warranties, express or implied, l ed, d, or any liability l y ffrom the use of this material. For complete l warrranty, safety and product information, f consultl your local Kubota dealer. For the complete disclaimer, go to KubotaUSA.ccom/disclaimers /d l andd see the posted disclaimer.

Serving MA, RI, NH, ME, VT and Upstate NY.

www.miltoncat.com

71789BENDERS 6 -70 -SVILLE 0 2 WWW W.MESSICKS.COM ABBOTTSTOWN CARLISLE ELIZABETHT BETHTOWN HALIFAX

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 11

ROGERS 60 TON 4-AXLE DROPSIDE

135 Lincoln Avenue • Prospect Park, PA (Philadelphia) • 19076 John Conner - 800-220-4033 • 610-534-0700 796 Unionville Road • Prospect, PA (Butler) • 16052 Ryan Alles - 888-806-0643 • 724-636-9986

IN STOCK! 8’6” X 27’ DECK

Air Lift 3rd & 4th Axles

New Rogers 55 ton, No-Foot Neck, 25' deck, Deep Well Stick Pocket Reinforced wheelcovers, 275's on Aluminum, Air lift 3rd, Air lift flip 4th Night Lights, Strobes, Black Paint.. ..............IN STOCK!

Rogers 55 ton CobraNeck, 26' deck, 18" ride ht, Bucket Pocket, Depressed Crossmembers, Air lift 3rd, Air Lift Flip 4th. Reinforced Wheel covers, Night Lights, Strobes, 275's, Aluminum Outers. Black Paint. .. ..............IN STOCK!

Rogers 35 ton, Gentle Riser, 24' deck, 275's Aluminum, Night Lights & Strobes. Rogers Red and Black Paint ........IN STOCK!

Rogers CY50GR, 50 Ton Gentle Riser, Paver Ramps, 275’s, Aluminum Wheels, Air Lift 3rd, Night Lights, Strobes, Black and Red Paint .. ................IN STOCK!

Rogers Custom 50 Ton No-Foot, 24' deck, pin-on flip 3rd axle, air lift, 275's, Aluminum .................... ..............IN STOCK!

Rogers Custom PT35L, 35 ton Rear Loader, Air Ride, Air Ramps, 235's, Aluminum, Red or Black Paint................ ..............IN STOCK!

Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint, 22' and 24' deck, 8’ Air Ramps.. ................IN STOCK!

Felling 25 Ton, Air Tilt, Air Ramps, 24’ Deck + 6’ Tail ...... ................IN STOCK!

ASK ME ABOUT AIR RAMPS!

Page 12 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bobcat® T590 Compact Trac a k Loader

0.9% 0% FINANCING FOR UP TO

Boobcat® E35 Coompact Exca c vator

FINANCING FOR UP TO

60 MOS 60 MOS P LU S G PLUS GET ET

OR IIN OR NL LIEU IE U O OF FF FINANCING, INANCING, G GET ET

REBATES REBATES UP T UP TO O

UP T UP TO O

4,000 $4,000

ON SELECT SELECT NEW NEW BOBCAT BOBCAT TRACK LOADERS TRACK LOADERS

ON SELECT SELECT NEW NEW BOBCAT BOBCAT COMPACT EXCA COMPACT E XCA AV VATORS VATORS

f /31/2021 a tici ligib ff ti e tt 31/2021. Offers available on new equipment in US and Canada only. Some restrictions apply. Length of contract may vary. Prior purchases not eligible. See dealer for details. Financing provided on approva edit by authorized Bobcat finance providers too well-qualified buyers. Not all customers will qualify for delayed payment promotion. Administrative fees may apply. Offer not available to government accoun tional accounts and municipal /utility bid customers. Non-commercial customers may not be eligible for low rate financing. Bobcat Company reserves the right to exten

f 1 a ici li b ff 31/2021. Offers available on new equipment in US and Canada only. Some restrictions apply. Length of contract may vary. Prior purchases not eligible. See dealer for details. Financing provided on approva edit by authorized Bobcat finance providers to well-qualified buyers. Not all customers will qualify for delayed payment promotion. Administrative fees may apply. Offer not available to government accoun tional accounts and municipal /utility bid customers. Non commercial customers may not be eligible for low rate financing. Bobcat Company reserves the right to exten

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509

845/278-7766 Fax: 845/278-4431 E-mail: dan@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT EXCAVATORS:

TRACTORS:

2015 DOOSAN DX350LC-5, FULL CAB, QUICK COUPLER, 738 HOURS, 2 WAY PIPING ..........$225,000 2014 KUBOTA M108 “OVER THE RAIL” BOOM MOWER, CAB, 4WD, 2150 HRS, ROTARY HEAD..$79,995 2015 KOBELCO SK85SR, 2572 HRS, 36” BKT, HYD THUMB, KUBOTA STYLE COUPLER, PATTERN

CHIPPERS:

CHANGER, RUBBER TRACKS ....................................................................................................$79,995

2013 RAYCO RC1220 12” CHIPPPER, 1880 HRS, AUTO FEED, NEW DRUM BEARINGS, WINCH, 100 2005 KOBELCO SK210LC, CAB, HVAC, HYD THUMB JUST SERVICED, HOURS UNKNOWN ....$59,995 HP KUBOTA ENGINE ..................................................................................................................$24,995 2017 NEW HOLLAND E30B, CAB W/HEAT/AC, 300 HOURS, MANUAL COUPLER, 4 WAY BLADE, 24” BKT & 48” GRADING BUCKET....................................................................................................$41,995

SCREENERS:

2018 VIBROSCREEN SCM40C BOX SCREENER W/CONVEYOR, 123 HOURS ..........................$129,000 SKID STEER LOADERS: 2018 VIBROSCREEN SCM40 BOX SCREENER, 200 HRS, NO DPF, NO DEF................................$54,995 2017 NEW HOLLAND L220, 130 HRS, CAB, HVAC, 2 SPEED, PILOT CONTROLS ......................$37,995 NEW VIBROSCREEN SCM75C BOX SCREEN W/CONVEYOR, TIER 3 ENGINE ..........................$165,000 2012 NEW HOLLAND L223, 2 SPEED, PILOT CONTROLS, CAB HVAC, 2525 HRS ....................$32,995 NEW VIBROSCREEN SCM115T TROMMEL, NO DPF, NO DEF ....................................................$150,000 2016 KUBOTA SSV75, 300 HRS, CAB HVAC, HIGH FLOW, HYD COUPLER, PILOT CONTROLS $34,995 2018 VIBROSCREEN SCM115T TROMMEL, 400 HOURS, NO DPF, NO DEF ..............................$123,500 2015 NEW HOLLAND L230, 501 HRS, 2 SPEED, CAB HVAC, HIGH FLOW, HYD COUPLER, PILOT CONTROLS ................................................................................................................................$36,995 2017 NEW HOLLAND L234, 270 HRS, 2 SPEED, CAB HVAC, HYD COUPLER, PILOT CONTROLS ........ ..................................................................................................................................................$39,995 2017 NEW HOLLAND L218, 161 HRS, CAB HVAC, PILOT CONTROLS, HYD COUPLER ............$34,995 2019 KUBOTA SSV65, 88 HRS, CAB HVAC, FOOT CONTROLS, HIGH FLOW..............................$41,995

DOOSAN PC200

MISCELLANEOUS: 2003 BOBCAT 5600 TOOLCAT, 3025 HRS, JUST SERVICED, CAB HVAC, HYD DUMP, INCLUDES TOW HITCH PLATE (NO BUCKET INCLUDED) ....................................................................................$29,995 2017 BOMAG BW213D-4, CAB W/HEAT/AC, VIBRATORY ROLLER, 84” DRUM ROLLER, 64 HOURS .... ................................................................................................................................................$106,800 2014 DOOSAN DXB260 BREAKER, 8500 LBS, FOR DX350, HAMMER TOP FOR PIN GRABBER ..$35,000

See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

AT WWW.WTRACTOR.COM

VIBROSCREEN SCM40

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 13

For more information contact: Skip Letcher or Jesse Weller used@traceyroad.com | (800)872-2390 TRACEYROAD.COM – EVERYTHING YOU NEED TO GET THE JOB DONE SALE PRICE: $52,900

LOCATION: BINGHAMTON, NY 2006 SAKAI SV505D • INV#131242CEG • 2,720 HOURS SALE PRICE: $81,500

LOCATION: SYRACUSE, NY 2012 KOBELCO SK210LC-9 • INV#151312CEG • 3,042 HOURS SALE PRICE: $104,320

LOCATION: SYRACUSE, NY • 2014 LIEBHERR L528 • INV#80442CEG • 1,064 HOURS

SALE PRICE: $139,000

LOCATION: SYRACUSE, NY 2017 JOHN DEERE 544K-II • INV#155600CEG • 3,569 HOURS SALE PRICE: $105,000

LOCATION: SYRACUSE, NY 2016 CARLSON CP100 • INV#148981CEG • 2,385 HOURS SALE PRICE: $339,000

LOCATION: SYRACUSE, NY 2015 RUBBLE MASTER RM100GO! • INV#83484CEG • 1,609 HOURS

SALE PRICE: $72,900

LOCATION: SYRACUSE, NY 2012 KAWASAKI 65TMV-2 • INV#146698CEG • 5,300 HOURS

SALE PRICE: $59,900

LOCATION: SYRACUSE, NY 2006 NEW HOLLAND TS6.115 • INV#156980CEG • W/ AX22 - 22’ BOOM MOWER

SALE PRICE: $178,320

LOCATION: KIRKWOOD, NY 2018 HYUNDAI HL965 • INV#111970CEG • 1,600 HOURS

SALE PRICE: $279,900

LOCATION: SYRACUSE, NY 2013 SANDVIK QJ341 MOBILE CRUSHER • INV#152490CEG • 2,399 HOURS

SALE PRICE: $181,920

LOCATION: SYRACUSE, NY 2014 BELL B30E HAUL TRUCK • INV#79244CEG • 3,800 HOURS

SALE PRICE: $205,920

LOCATION: SYRACUSE, NY 2019 HYUNDAI HX300LR • INV#124010CEG • 800 HOURS

ALBANY BINGHAMTON QUEENSBURY ROCHESTER SYRACUSE UTICA WATERTOWN

TRACEY TRUCK PARTS HAS YOU COVERED, NO MATTER WHAT YOU’RE LOOKING FOR.

Page 14 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Industry Veteran Dudley Sutton Dies at 80

Dudley Sutton

Dudley Sutton, 80, of Clay, N.Y., died peacefully at his home on April 25, 2021. Mr. Sutton worked almost his entire career in the construction equipment industry. He started in the 1970s with The Dow Company, an International Harvester and Lorain Crane distributor in western New York State. From there, he and his wife, Leola, moved for a short time to Davenport, Iowa, to run the Case Power factory store. After a brief time they moved to Long Island, N.Y., where the Case distributor, T.J. Burke, had gone out of business and Case was opening up a factory store to replace the distributorship; Mr. Sutton was moved there to manage that dealership. From there the Suttons moved back to the Syracuse, N.Y., area to work for Monroe Tractor. In 1992 he left Monroe Tractor to join L.B. Smith, which eventually became Vantage Equipment and just recently purchased by Alta Equipment, the Volvo dealership that he ended his career with. Mr. Sutton was still working with customers of Alta Equipment three days before his passing. He was dedicated to serving the needs of his customers and was known for being detail oriented. According to his wife, Mr. Sutton never had any desire to

stop working; his customers were his friends. For the last few years he had theoretically moved to a part-time position, however, he was still going in to the office each and every day. “I recently found myself in the unfortunate position of traveling around and notifying Dudley’s customers of his passing,” said Todd Kaley, Mr. Sutton’s supervisor at Alta Equipment. “What really struck me was that each and every one of these customers considered themselves Dudley’s friend. In fact, Dudley’s circle of friends were his customers and he took special care of his customers because they were his friends. “We always knew that Dudley was a great stickler for details; we always assumed that was because he was a detailoriented person. I am now convinced that the real reason is that because they were his friends Dudley wanted to make sure that every single detail of the transaction went exactly as it should. He wanted to be able to look his friends in the eye and know that things happened as expected. Dudley was also know for always helping his customers out in areas outside of the work environment. There was an example of a customer’s child that Dudley helped get into

the university that the child had their sight set on. Those were the types of things that Dudley found great satisfaction in doing.” Mr. Sutton looked forward to family trips and had a passion for golf, which was fulfilled at Beaver Meadows Golf Club, where he was a member for 25 years. He especially enjoyed reading and watching Antiques Road Show, and went to many auctions with his wife to collect unique antique items. In addition to Leola, whom he married in 1972, Mr. Sutton leaves behind children Melissa Gable Saccento (the late Rocco); Robin Sutton Sheppick (Kyle); Steve (Pam); grandchildren Taylor Sheppick, Emily, Lauren and Grant Sutton. He was predeceased by his parents Gordon and Marjorie, brothers Gordon (Faye) and Neil (Chris). Mr. Sutton’s greatest joy was to come home and pet his fur babies “Lily” and “Sparkles”. In lieu of flowers, donations may be sent to an animal sanctuary or rescue group, or consider adopting your own animal to love. His final resting place will be Butler Center Cemetery in Wayne County. A private Memorial Service will be held at a later date. 

Boeing to Give Virginia Tech $50M Gift to Build New Campus Virginia Tech will receive navirus pandemic, the Post SmithGroup photo $50 million from Boeing, the reported. world’s largest aerospace comThe new Virginia Tech campany, to go toward financial aid pus will occupy a 3.5-acre site to build and diversify the graduin the Potomac Yard neighborate technology campus the unihood south of Alexandria’s Four versity is developing in Mile Run. The first academic Alexandria, Va. building is slated to be 11 stories The multi-year donation to tall with 300,000 sq. ft. of floor Virginia Tech from the 105space and is on track for a year-old American aerospace groundbreaking as early as and defense contractor was September. Two more buildings announced May 4 and matches also are planned that will each the largest ever corporate gift to encompass about 150,000 sq. ft. the university, based in Boeing’s largess reflects the Blacksburg, Va. interest companies are showing Construction of the Virginia The compact, four-acre campus will eventually comprise three in an educational project in Tech Innovation Campus in academic buildings. northern Virginia near the site of Alexandria is expected to get the new Amazon East Coast under way this fall. If all goes to plan, the to help establish the greater Washington, headquarters. northern Virginia campus’ first building will D.C., area as the world’s next major tech David Calhoun, Boeing’s chief executive open in 2024 with a focus on research and hub,” Timothy Sands, president of Virginia and a 1979 graduate of Virginia Tech, told graduate education in computer science and Tech, said in a statement. the Post that the gift is meant to promote a The university has approximately 36,000 skilled and diverse workforce. He said computer engineering. According to the Washington Post, the students, most of them on its main campus in Boeing has eyed the campus closely in the university’s goal for the campus is to grow to Blacksburg. years since it emerged as a venture to boost The first 79 Innovation Campus master’s Virginia’s successful bid for the new approximately 750 master’s degree students students are based at a Falls Church, Va., Amazon headquarters. and 200 doctoral students. “This is a milestone moment in our uni- location. In 2020, they began taking classes “We want to be one of the early players on versity’s history, and it will propel our work online for this academic year due to the coro- the campus,” Calhoun said in a videoconfer-

ence interview with the newspaper. “Its location, next to policymakers, is going to matter.” The Boeing gift also will support several other initiatives, according to Virginia Tech, including scholarships to “attract, retain and propel a diverse cohort” of master’s students and doctoral fellowships to attract a “highly skilled and diverse cohort of researchers.” Monies also will be used to enhance student recruiting, academic support and programs to encourage military veterans and other nontraditional students to enroll, reported the Post. Additionally, there are plans to collaborate with local public schools to build interest among younger students in science, technology, engineering and mathematics. “The gift is immensely important,” noted Lance R. Collins, who started with Virginia Tech last August as vice president and executive director of the Innovation Campus. “I want this to be the most diverse graduate tech program in the country. This is going to make that possible.” He said that he wants to draw various underrepresented groups, including women, African Americans, Native Americans and Latinos, to the Alexandria campus, according to the Post. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 15

H.O. Penn Renting g Made M Eassyy

Web

Mobile

888-REENTT--CAT AT www.ho openn.com

Phone

Page 16 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.GroffTractor.com

Used Equipment

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... $121,053

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053 2012 CASE 580SN, EQ46102, SN:

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours .................... ................................... $121,053 NCC564232, 4,112 hours ...... $41,900

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... $121,053

Genuine CASE Parts for Your Equipment Available to Order 24/7 https://ePortal.GroffTractor.com 2012 CASE 621F, STK # 652, cab w/ heat & air,

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053 $121 053

3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... $121,053 $121 053

For Parts Parts & & Service 800-33-GROFF(47 (47633) For Service Call CCall800-33-GROFF 7633)

Call today! 800 0-33-GROFF(476 633)

Call For Price See Our Website for a Comple ete Listing of Used Equipment for Sale S M E M B E R

w www.grof ftractorr.com .com www.GroffTractor.com

www.casece.com

©2015 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States HUK THU` V[OLY JV\U[YPLZ V^UL LK I` VY SPJLUZLK [V *5/ 0UK\Z[YPHS 5 = = P[Z Z\IZPKPHYPLZ VY HɉSPH[LZ

35 West Route 70 Marlton, NJ 08053

856-983-0111 www.cherryvalleytractor.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 17

Proven worldd-class Tele-craw e wlers LER TELE CRAW TH ORT N NO

1LIINNE UP

CA!! R CA MEER AAM

ft | 68m main boom 223 348 ft | 105m max tip height full attachment with Superior capacities winch design Ultra-wide Vision package - 4 cameras!

Ver e mont 802-658-1700 Massachusetts etts 508-499-1950 Pennsylvania ia 717-795-0700 New Yoork 315-676-2008 www.woodsscrw.com

250 t | 230 mt TELESCOPIC CRAWLER

Lexington, Kentucky, USA SA | www.linkbelt.com

HIGHEST CAPACITY A AVAIL A ABLE IN THE MARKET!

B U Y

•

L E A S E

•

R E N T

Page 18 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Capital Region BOCES Tours Robert H. Finke & Sons Facility

Bob Rowe, parts manager of Robert H. Finke & Sons, welcomes students from Capital Region BOCES to Finke’s training center facilities in Selkirk, N.Y.

mong the biggest challenges the industry faces is a severe shortage of technicians, specifically an Students got a kick out of this 1970s vintage Autocar extremely low number of young people willing to truck being restored as a project for the owner of Robert H. Finke & Sons. It will eventually sit in the deal- train to fill the positions that are open. Equipment dealerships ership’s showroom, which already features a couple across the country openly state that one of the biggest challenges they face in the future of their operations is being of vintage vehicles. properly staffed with heavy equipment technicians. Capital Region BOCES Career and Technical School located in Schoharie, N.Y., offers high school students educational opportunities in a wide variety of vocational areas, some of which would build a basic foundation for work in an equipment dealership. Some of these vocational areas include heavy equipment operation, auto body collision and repair, diesel mechanics, welding and metal fabrication. Robert H. Finke & Sons in Selkirk, N.Y., works closely with organizations like BOCES and colleges in the SUNY

Students are given the opportunity to view cutting-edge earthmoving technology like this Kobelco SK210HLC hybrid excavator. The idea that the same type of technology that was being used in hybrid cars is already showing up in earthmoving equipment impressed the group of students.

system like Cobleskill and Morrisville that offer vocational programs to get students exposed to the type of positions available at its dealership. On April 30, 2021, a group of students from Capital Region BOCES spent the morning getting a guided tour of the Robert H. Finke & Sons facility, along with a detailed explanation of the bright future and benefits offered by choosing a career in the heavy construction equipment industry. CEG

Students enjoyed an up-close look at the latest Western Star truck added to Finke’s already extensive fleet. These trucks are used with lowboy trailers to deliver equipment to Finke’s customers across New York State and western New England.

Bob Rowe explains to students the wide variety of tasks that a mechanic at Robert H. Finke & Sons could face during the course of a day, using the Vogele paver in the background as an example. Finke technicians, as he explained, are not typically tasked to working on a specific make or model of machine day in and day out. They could be working on a Vogele paver in the morning and a Bobcat skid steer in the afternoon.

For individuals whose interest migrated more toward smaller machines, time was spent with the Bobcat compact equipment line.

Students interested in vehicle body repair were awed by the paint booth, which is the largest of its type in New York State.

A demonstration of line boring, a process that would typically be used when buckets aren’t quite fitting the way they should, is performed for the attending students.

Finke employee Alex Giebitz, who is demonstrating various bolt thread types, was once a student at Capital Region BOCES and is now an on-road diesel mechanic. After attending Capital Region BOCES, he then went to Alfred State University, where he received a degree in heavy equipment repair.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 19

2021 USED DOOSAN EQUIPMENT SALE

2014 Doosan DX180LC-3, 3310 Hrs, s/n SR2979 ..............$59,900

2014 Doosan DX180LC-3, 4250 Hrs, s/n SR3001 ..............$75,750

2014 Doosan DX180LC-3, 3375 Hrs, s/n SR2992 ..............$65,900

2014 Doosan DX180LC-3, 2680 Hrs, s/n SR3047 ..............$72,500

2014 Doosan DX180LC-3, 2310 Hrs, s/n SR3048 ..............$79,900

2014 Doosan DX180LC-3, 2610 Hrs, s/n SR2978 ..............$75,500

2013 Doosan DX210W, 2420 Hrs, s/n SR2821 ....................$104,500

2014 Doosan DL350-3, 4350 Hrs, s/n SR2994 ....................$102,500

2013 Doosan DX140LCR-3, 3095 Hrs, s/n SR2816 ..............$72,500

Doosan DX190W-3, 2420 Hrs, s/n SR3153 ....................$105,900

2015 Doosan DL250-3, 2075 Hrs, s/n SR3223 ......................$89,900

2013 Doosan DX210W, 2420 Hrs, s/n SR2821 ....................$104,500

1569 US Route 9W • Selkirk, NY 12158 (518) 767-9331

www.finkeequipment.com

Page 20 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 21

ShoorQuip Suupply,y, Inc.

Trench Shielding & Shoring

Call Us For F All Your TTrench rennch Shoring Ne Needs eeds | We Carry 11” Steel Road ad Plate Familyy owned and operated pperated since 2010

ShorQuip Suppply, Inc. Is Proud to Be a Certified Womeen’s Business Enterprise (WBE).

For Rentals/Salees Contact: r yan@shoorquip.com or davejr@shor @shorquip.com

Manhole Box

1302 Conshohoocken Rd Conshohocken, PA PA 19428

Slide Rail

Aluminum Build-A-Box uild-A-Box

Aluminum Hydraulic Shoring

610 . 239 2 .6234 • ww ww shorquip com ww.shorquip.co

Steel Trench r Box

Authorized Dealer aler for

Efficiency Production

Page 22 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Foundation Equipment

Sales

Rentals

Parts & Service

More than machines.

SOLUTIONS.

Pittsburgh 412 264 4480

Jacksonville 904 284 1779

Toronto 800 760 0925

Philadelphia 610 626 2200

Boston 508 821 4450

Greensboro 336 854 1220

Washington, D.C. 301 599 1300

NY/NJ 732 528 5477

Milwaukee 262 345 5715

1 800 PILE USA / ecanet.com

Hiring Remains Big Business Challenge for Steel Erectors

3:24 PM

In January, the Steel Erectors Association of America surveyed its members regarding the business challenges they face. More than 40 percent of those responding said that hiring issues are currently their biggest challenge and 37 percent of them believe hiring will continue to be a problem over the next three years. Closely related to this issue is business growth, which is hindered by the inability to hire enough people with the right skills. More than 18 percent of member respondents currently face business growth challenges with that number expected to increase over the next three years. Meanwhile, having craft training in place to support new and existing personnel is the third biggest concern, although SEAA members feel their craft training needs will improve by 2024. “SEAA has successfully been growing its Ironworker Craft Training program over the last eight years. We currently have nearly 30 members participating in the program with more joining all the time,” said Geoff Kress, president of SEAA. “In addition, we have launched an aggressive video production schedule to create about 20 short training videos by the end of the year. These videos align with the SEAA/NCCER ironworker training curriculum.” In addition to SEAA’s job board, which is free for members but available to anyone, SEAA will explore additional resources to assist members with hiring challenges, added Kress. One noteworthy result of the survey — a whopping 74 percent of members who responded say they would recommend SEAA to a friend or colleague. “SEAA provides critical networking and training resources for both open shop and union erectors, fabricators, and general contractors,” said Jack Nix, membership committee chairman. For more information, visit www.seaa.net. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

Page 24 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Excavation Complete On NEBT Project in Washington, D.C. Excavation of the Northeast Boundary Tunnel (NEBT) in Washington, D.C., a joint-venture project valued at $580 million being constructed by The Lane Construction Corporation and its parent company, Webuild Group (formerly Salini Impregilo), is complete. The Earth Pressure Balance Tunnel Boring Machine (TBM) “Chris” has completed the combined sewer outflow (CSO) tunnel being built to improve the water quality of the Anacostia River in Washington, D.C. The 23-ft. inside diameter tunnel was successfully completed with about 27,700 ft. excavated and 4,442 rings installed. The tunnel starts at RFK Stadium and ends at R Street, NW near downtown D.C. The April 2021 hole-through milestone at the R Street shaft comes almost one year after Chris reached the W Street shaft, the first and only in-line shaft that the TBM crossed during its 26,700-ft.long drive beneath Washington, D.C. The project is the largest component of the Clean Rivers Project, a greater initiative being led by DC Water, which will provide a complete system where The Earth Pressure Balance Tunnel Boring Machine (TBM) “Chris” has completed the sanitary and storm water from local juris- combined sewer outflow (CSO) tunnel being built to improve the water quality of the dictions is treated before being dis- Anacostia River in Washington, D.C.

charged into the Anacostia and Potomac rivers. Once the project is fully completed, the NEBT will increase the capacity of the existing sewer system to help manage flooding due to weather events, a problem the District has been experiencing for decades. The Anacostia River Tunnel project, the first component of the Clean Rivers Project, also was constructed by the Lane-Salini Impregilo joint-venture team. In early May, Lane lowered TBM “MudHoney” into a shaft in Seattle to start excavating the storage tunnel for the Ship Canal Water Quality Project in Washington. It’s another project currently being developed by Lane in the clean water sector that, too, will prevent millions of gallons of polluted stormwater and sewage from entering the local water resources each year. Webuild, a global leader in the clean water sector, and Lane are committed to providing solutions for the sustainable management of water, such as treatment and desalination plants, and hydraulic tunnels. For more information, visit www.laneconstruct.com. 

Las Vegas Raiders Select Contractor’s Son in NFL Draft “He’s a guy who was in first, out last.” Kenny Pickett Pitt Quarterback

It was only five years ago that Jimmy Morrissey was a walk-on at the University of Pittsburgh, just hoping to earn a scholarship. Now, due to his tenacity and work ethic, he’s in the National Football League. Morrissey was chosen by the Las Vegas Raiders in the seventh round of the NFL draft on May 1 after an All-ACC career at Pitt where he started at center for the Panthers for four seasons. His teammates respected his leadership and fierce line play so much that they chose him to be a co-captain in 2019 and 2020. The 6 ft. 3 in. Philadelphia native is the son of Jim Morrissey, a contractor whose

Jimmy Morrissey.

multi-generational family construction business, James D. Morrissey Inc., is respected and successful in the Delaware Valley. Before the NFL Draft, Pitt head coach Pat Narduzzi described Morrissey in glowing terms to TribLive — a message that may have resonated with Raiders coach Jon Gruden, a former Pitt assistant.

“What makes Jimmy such a great football player and a leader is his ability to gather people together and everyone will want to play for him,” Narduzzi said to the Pittsburgh newspaper. “He’s tough, athletic, smart.” Aside from the Burlsworth Trophy awarded to him as the nation’s top player

who began as a walk-on, Morrissey also carried a 3.46 grade-point average when he left Pitt. Although not initially invited to the Senior Bowl in January, where players show off their talents for NFL scouts and executives, he received a call the day before and drove from Pensacola Beach, Fla., (where he was training), to Mobile, Ala., studied the playbook overnight and played in the game. Pitt quarterback Kenny Pickett noticed that type of determination repeatedly during their time together at Pitt. “He’s a guy who was in first, out last,” Pickett told TribLive. The only difference now is he’ll get paid for it. The elder Morrissey also owns Eureka Stone Quarry Inc. and JDM Materials Co., and together, the three Philadelphia-based family businesses have helped construct almost every road and development in eastern Pennsylvania. Their menu of services includes heavy and highway construction, commercial and industrial building, concrete and asphalt paving, engineering and the sales of crushed stone, sand and gravel, and asphalt of the highest quality sourced directly from their own operations. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 25

Page 26 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Volvo CE Delivers Its Version of ‘Factory 4 Tomorrow’

Across 14 sites around the world, smart factory teams have been set up, tasked with looking for ways to innovate and impact the business.

The Fourth Industrial Revolution is occurring at a speed that has never been seen before. It has the potential to change everything. For Volvo Construction Equipment (Volvo CE), it’s an opportunity not only for digital transformation, but to build a future that we all want to live and work in. The Fourth Industrial Revolution, or Industry 4.0 — which was first identified by Klaus Schwab, founder and executive chairman of the World Economic Forum in his book of the same name — is revolutionizing the way companies manufacture, improve and distribute their products. Volvo CE is embracing the change and putting the power for innovation directly in the hands of its employees with a vision of the future it’s calling Factory 4 Tomorrow (F4T). Explaining the company’s approach, Lina Stålberg, manufacturing technology development and governance at Volvo CE, said, “For us, Factory 4 Tomorrow is about far more than just introducing new technologies, there’s a far higher purpose behind it. It’s about building a world we want to live in and workplaces we want to work in.” Across 14 sites around the world, smart factory teams have been set up, tasked with looking for ways to innovate and impact the business. Working closely with others at the site,

these teams are actively seeking ways to solve everyday business problems and challenges with the help of exciting new technologies, such as IoT, AI and machine learning. They will be experimenting and testing to generate new ideas and ways of working. It will be a complete overhaul of every production detail and the innovations that are explored could very well become a reality on the factory floor in the coming years. Automation in the factories and offices, for example, will reduce the need for employees to engage in repetitive tasks, creating a safer and more ergonomic work environment. Lina added: “To be successful, it’s critical to create the right culture for change. We want our people to be excited by the possibilities new technologies can deliver and the solutions they can provide to real problems they might face in their day-to-day jobs and lives. That’s why our approach is collaborative and very much bottom-up. We’re empowering our employees to help enact change.” Brunno Muller, head of advanced manufacturing engineering and research at Volvo CE, said, “Our role is very much to facilitate good dialogue and collaboration and provide

Factory 4 Tomorrow will explore new technologies and ways of working to make manufacturing more sustainable.

coaching and mentoring to help guide the site teams on their journeys. We hold the big picture, but it is up to the individual sites to identify areas for change. It’s very inspiring to see how engagement in Factory 4 Tomorrow is growing across the entire organization, from employees all the way up to leaders. And with it, we are all developing

new skills and competencies.” As well as creating an attractive workplace, Factory 4 Tomorrow will transform manufacturing processes at Volvo CE, delivering significant benefits for customers, many of whom are demanding more customization and more individualized products. Due to globalization and new technologies, flexibility and speed of change are becoming ever more important. A digital transformation will accelerate Volvo CE’s lean journey towards operational excellence. Optimized manufacturing also will bring sustainability benefits, helping to reduce Volvo CE’s industrial footprint. “At Volvo CE, our mindset is very much based on collaboration, both internally between teams and across sites, as well as externally with customers, suppliers and partners. We cannot build the future we want by ourselves. We need to step away from silo thinking and consider how we do this endto-end, joining forces with partners and sharing experiences,” Muller said. For more information, visit www.volvoce.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 27

ab Se H

la Es

Se H

l año

abl a

Espa

ñol

2009 CAT 450E, STK# 21E001

2017 CAT 315FL, STK#21E013

EXCAVATORS

19E071 – 2015 DOOSAN DL250-5, EROPS W/AC, HYD QC, GP BKT, RIDE CONTROL, HEATED MIRRORS, 20.5R 25 TIRES ..........$89,000 21E021 – 2004 CAT 950G-II, EROPS W/AC, HYD QC, AUX HYDRAULICS, GP BUCKET, RIDE CONTROL, 23.5X25 TIRES $64,000 21E023 – 2008 CAT 966H, EROPS W/AC, GP BUCKET, RIDE CONTROL, 26.5R25 TIRES ............................................................$94,000 21E025 – 2008 CAT 950H, EROPS W/AC, SCALE, GP BUCKET, AUXILIARY HYDRAULICS, RIDE CONTROL, 23.5X25 TIRES ........$72,000 21E026 – 1997 CAT 950F-II, EROPS W/AC, HYD QC, AUX HYDRAULICS, SIDE DUMP BUCKET, 23.5X25 TIRES ............$38,000

20E058 – 2008 CAT 320DL, EROPS W/AC, 9’.6” STICK, 31’.5” PADS, HYD Q/C, 42” BUCKET ............................................................$78,000 19E007 – 2010 CAT 336DL, EROPS W/AC, 10’.6” STICK, 33’.5” PADS, AUX HYD, BKT..............................................................$98,000 21E013 – 2017 CAT 315FL, EROPS W/AC, BACKUP CAMERA , 8’.6” PUSH BLADE, 23’.5” PADS, 9’.10” STICK, DUAL FUNCTION, AUXILIARY HYD, HYDRAULIC THUMB, HYD QC, 58” BKT, 24” BKT $98,000 21E016 – 2012 CAT 336EL, EROPS W/AC, 10’.6” STICK, HYD QC, 33’.5” PADS, AUXILIARY HYD ..............................................$102,000 21E024 – 2017 CAT 308ECR-2, EROPS W/AC, BACKUP CAMERA, PUSH BLADE, 18” PADS W/RUBBER INSERTS, 7’.3” STICK DUAL FUNCTION AUX HYD, HYD THUMB, HYD QC, 18” BUCKET ....$58,000 21E029 – 2012 CAT 328DL CR, EROPS W/AC, 33’.5” PADS, 10’.6” STICK, AUXILIARY HYD W/4TH FUNCTION, HYD Q/C, 36” BKT $POR 21E034 – 2013 CAT 321DL CR, EROPS W/AC, 31’.5” PADS, AUXILIARY HYD, HYD Q/C ....................................................................$POR

RUBBER TIRE LOADERS / WHEEL LOADERS 19E068 – 2013 CAT 924K, EROPS W/AC, HYD. FUSION QC, GP BKT, RIDE CONTROL, TRACTION CONTROL, POWER AND HEATED MIRRORS, 20.5 X 25 TIRES ..........................................................$89,000 19E078 – 2012 CAT 930K, EROPS W/AC, HYD FUSION Q/C, AUX HYD, GP BUCKET, RIDE CONTROL, TRACTION CONTROL, POWER AND HEATED MIRRORS, REARVIEW CAMERA, 20.5X25 TIRES ......$92,000 21E005 – 2013 CAT 950K, EROPS W/AC, GP BUCKET, RIDE CONTROL, BACKUP CAMERA, SCALE, AUTO GREASER, POWER AND HEATED MIRRORS, ROADING PACKAGE, 23.5X25 TIRES......$95,000

DOZERS 19E058 – 2017 CAT D6K-II LGP, EROPS W/AC, STRAIGHT 6-WAY BLADE, RIPPER CONTROLS, GRADE CONTROL, NEW UC, 30" SHOES ..............................................................................................$135,000 20E004 – 2015 CAT D5K-II LGP, EROPS W/AC, 10'.4" STRAIGHT 6WAY BLADE, RIPPER CONTROLS, GRADE CONTROL, 26" SHOES $82,500 21E015 – 2006 KOMATSU D85PX-15EO, EROPS W/AC, 14’ SEMI-UBLADE W/T, RIPPER CONTROLS, 36” SHOES, DRAW BAR ......$78,000

LOADER BACKHOES 21E001 – 2009 CAT 450E, EROPS, W/AC, 4X4, POWERSHIFT W/AUTO, RIDE CONTROL, 4-IN-1 BUCKET, FRONT AND REAR AUXILIARY HYD, EXT-HOE, PATTERN CHANGER, 24” BUCKET........$69,000 21E022 – 2005 CASE 580SM-II, EROPS W/AC, 4X4, GP BUCKET, EXT-HOE, 24” BUCKET ............................................................$38,000 21E028 – 2006 CAT 430D, EROPS W/AC, 4X4, FRONT Q/C, GP BUCKET, EXT-HOE, PATTERN CHANGER, 24” BUCKET ....................$40,000

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

Used E ipment Equ

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053 2019 Case 650M WT, stk # EQ0035853,

Cab w/Heat & AC, Deluxe Air Seat, 10' P.A.T. 6-Way Blade, 24" Max Life U/C, Sweeps & Rear Screen, CWT., Draw Bar, Premier Warranty, 452 Hrs..........................$92,500

w/Heat & AC, Ride Control, 4F/3R Powershift, 26Rx25 Michelin XHA2 6.1 yd3 Bucket, Op. Wt 59,192 Lb., 8,030. Hrs ...... ....................................................$142,500

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2018 Case CX210D Narrow, stk # EQ0033054, Cab w/Heat & AC, Long Arm 9'8", 24" TBG Pads (8'6" Overall Width), Multi-Function Aux. Hydr., QC, Hydr. Thumb, 42" HD Bkt, 1,025 Hrs ....$169,500

2017 Case CX250D, stk # EQ0047907, Cab w/Heat & AC, 9'10" Arm, 32" TBG Pads, Multi-Function Aux. Hydr., Hydr. QC, 48" Bkt, 3,927 Hrs ..............................$129,500

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2006 Case 621D, stk # EQ0045623, Cab w/ 2012 CASE 621F, STK # 652, cab w/ heat & air, Heat & JRB QC, GPtires, Bucket, 3rd spoolAC, valve, cwt,Hydraulic ride control, radial 307 20.5 25 Tires, 10,469 Hrs ..........$39,500 hoursx....................................................... $121,053

2019 Case CX250D Long Reach w/ 60' Reach, Cab w/ Heat & AC, Long U/C, Long Reach Boom, 26'3"621F Arm,, STK 32"#TBG 2012 CASE 652,Pads, cab w/60" heaDitching t & air, Bkt., Halogen Remaining Premier 3rd spool valve,Lights, cwt, ride control, radial tires, 307 Warranty & Pro-Care, 1050 Hrs ......$172,500 hours ....................................................... $121,053

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

1999-2005 Heil Dry Bulk Trailers Prices range from $10,000-$20,000

1986 Stephens 12yd Batch Plant 24” Feed Conveyor with 2 Feed Bins 36” Batch Belt. All Beams are available

Call today! (800) 737-0049

M E M B E R

Price $145,000 Please contact Tim Kurz for questions or pricing: 267-566-1802 or tkurz@silvi.com

Silvi Group Companies Fairless Hills, Pennsylvania

www.silvi.com

See Our Website for a Complete Listing of Used Equipment for Sale

www.gtmidatlantic.com ©2019 GT Mid Atlantic. All rights reserved. CASE is a trademark registered in the United States HUK THU` V[OLY JV\U[YPLZ V^ULK I` VY SPJLUZLK [V *5/ 0UK\Z[YPHS 5 = = P[Z Z\IZPKPHYPLZ VY HɉSPH[LZ

Page 28 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Macy’s Plans to Spend $235M to Build K-Tec, Soil Connect New Skyscraper, Improve Herald Square Partner to Promote Efficient Earthmoving

Macy’s revealed new renderings on FXCollaborative rendering May 10 that illustrate its plans to build a new office tower over its midtown Manhattan, N.Y., flagship location in Herald Square. Two years after its initial announcement to build the skyscraper atop its landmark department store, the retailer also said that it will invest $235 million in the surrounding neighborhood — including new subway entrances and more pedestrian space. The New York Post reported the multimillion plans could help get the skyscraper plans approved by easing “the project’s way through the Uniform Land Use Review Procedure, the city’s often contentious approval process. The tower needs City Hall’s green light for a zoning Rendering of the proposed skyscraper on top of Macy’s. change for its size and height — 1 .5 million square feet of • Lighten pedestrian access office space and between 750 at Broadway and 34th Street and 900 feet tall, according to while also creating new and plans shown earlier.” efficient transit entrances to In a statement about the the Herald Square Station project, Macy’s said that the near Penn Station; Herald Square store will • Building a significantly remain open during construcupgraded gateway entrance to tion and that its plans will not the Herald Square Station at “impact various classic and Greeley Square; celebrated features at the • Adding ADA-accessible store, including the wooden elevators at the subway staescalators that pioneered the tions at 7th Avenue and 34th technology when they were Street, and at 35th Street and built in the 1920s.” Broadway, while also creatReleased to both the Post ing additional pedestrian and to Gothamist, the statespace on the northern edge of ment said that Macy’s is betPenn Station. ting on creating its huge, new Macy’s noted in its press office tower because it “envirelease to the Post and sions a Herald Square that Gothamist that these plans thrives long beyond New will be implemented only York City’s current recovery after it confers with the local from the global pandemic. As community board and other a leading center of interna- Macy’s proposed changes for the neighborhoods. concerned groups. tional commerce, New York is The retailer expects that its forecasting a significant amount of new office jobs in 2021, expecting a return to pre- multi-million-dollar “renewal plan” will generate an estimatpandemic office employment levels by the fourth quarter and ed $269 million in new annual tax revenue and support recouping office jobs lost at the outset of the pandemic. In 16,290 annual jobs, while fueling $4.29 billion in annual addition, improved access to mass transit at this major cross- economic output. “Macy’s Herald Square is one of New York City’s most roads for the city will be a significant investment in the iconic institutions and, as we plan for the future, we are doufuture.” bling down on our commitment to New York by reinvesting in our flagship location while committing $235 million in Currently, Macy’s Plans Include: • Transforming Herald Square and Broadway Plaza into a private investment to upgrade the Herald Square neighbormodern, car-free pedestrian-friendly urban space for New hood through our tower project,” said Jeff Gennette, CEO of Yorkers and visitors to gather and enjoy one of the city’s Macy’s, in the company statement. “We are proud to make this leadership investment in New most storied locations with upgraded connections to public transportation and substantial improvements to the Herald York’s recovery and are excited to welcome visitors back to Herald Square not only today, but for generations to come.”  Square Subway Station;

Soil Connect and K-Tec Earthmovers are working together to promote responsible and efficient earthmoving and material transportation practices across the United States. In order to bring awareness to the common pitfalls and inefficiencies faced by today’s dirt movers, the companies have agreed to work together to educate the earthmoving industry through multiple cross-promotional channels about new technologies and best practices. The companies also have discussed the integration of Soil Connect’s eTickets system into K-Tec’s new scraper telematics portal dashboard. “K-Tec is a heavy equipment manufacturer that is constantly on the cutting edge of technology,” said Cliff Fetner, founder and CEO of Soil Connect. “I see many parallels between our businesses, as we are often working with the same contractors that move lots of dirt, have excess dirt, or need more dirt on their job sites. Our marketplace is able to connect these hardworking professionals to make their lives easier.” “Soil Connect continues to develop revolutionary technology that is disrupting the dirt world and challenging old, inefficient methods of daily tasks,” said Mike Palitsky, president and CEO or K-Tec Earthmovers Inc. “Likewise, K-Tec’s scrapers have proven to be more efficient than traditional forms of earthmoving. We believe that working together progresses our mutual goal to advance earthmoving technology in the USA, which will benefit both of our organizations — as well as the entire industry — now and for the foreseeable future.” For more information on Soil Connect, visit www.soilconnect.com. For more information on K-Tec Earthmovers, visit www.ktec.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 29

We’re Your CALL US S Used Equipment TODAY DAY Y Headquarters! CONTACT CONT C ONT TA ACT CT TIM JIM DELANY TIRONE , USED EQUIPMENT USED EQUIPMENT MANAGER, MANAGE ER, FOR LOW-RATE FINANCING FOR LOW-RAT TE FINANCING G

5315-744-2899 70-499-9170 J TTDELANY@FIVESTAREQUIPMENT.COM I R O N E @ F I V E S TA R E Q U I P M E N T. C O M

FIVESTAREQUIPMENT.COM F I V E S T A R E Q U I P M E N T. C O M DUNMORE, PA

KIRKWOOD, NY

WA ATERF T ORD, PA

ORCHARD PAR ARK, NY

WILLIAMSPORT, PA

ROCHESTER,, NY

2016 JOHN DEERE 160G LC $

150,000

Stk# 23466, 1232 Hrs, Cab w/ AC, Cntrl Pattern Select, 24" Pads

2013 JOHN DEERE 250G LC $

90,000

2015 JOHN DEERE 130G

125,000

Stk# 23395, 6202 Hrs, 32" PADS11'10" ARM-PLBG-PC-NOBK

Stk# 23653, 731 Hrs, Cab w/ AC, Long Arm, 28" Pads, 36" Bucket

2014 JOHN DEERE 700K

2016 HITACHI ZX300LC-6

SYRACUSE, NY

WE PROUDLY REPRESENT THESE BRANDS AND MORE!

2015 JOHN DEERE 85G

90,000

120,000

Stk# 23718, 1974 Hrs, Cab w/ AC, Rubber Pads, 18" Pads

Stk# 23666, 1859 Hrs, ROPS, 30" Pads, Power-Angle-Tilt Blades

Stk# 31276, 4956 Hrs, Cab w/ AC, Long Arm, 32" Pads, Aux Hydraulics

2016 HITACHI ZX380LC-6

2018 HITACHI 350ZX

2015 JOHN DEERE 318E $

RENT BIG IRON. THE BIGGER THE IRON, THE MORE YOU O SAVE

140,000

47,500

245,000

250,000

Stk# 15447, 57 Hrs, Aux Hydraulics, Beefy Baby Tires, 60" Bucket

Stk# 31275, 2911 Hrs, Cab w/ AC, Long Arm, 32" Pads

Stk# 70912, 1460 Hrs, Cab w/ AC, Long Arm, Long Track, 28" Pads

2017 JOHN DEERE 624K-II

2015 JOHN DEERE 944K

2012 JOHN DEERE 750K

WE ’ R E YO U R R E N TA L HEADQUARTERS

190,000

Stk# 23564, 860 Hrs, Cab w/ AC, Quick Coupler, 20.5 Tires

760,000

Stk# 23906, 1455 Hrs, Cab w/ AC, Joy Stick Steer

105,000

Stk# 24021, 6434 Hrs, Cab w/ AC, Long Track, 22" Pads

Page 30 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Work Begins On $950M Clean Energy Case to Host Live Project Running From Maine to Canada Virtual Event On By Lori Tobias CEG CORRESPONDENT

Work on a $950 million project to bring clean energy to New England began three months ago and crews have already set a handful of the nearly 1,000 structures involved. The New England Clean Energy Connect (NECEC) project runs 145 mi. from Maine to Canada and is expected to reduce carbon emissions in Maine and New England by 3.6 million metric tons annually as hydropower replaces fossil fuels to provide power to homes across the region. Thorn Dickinson, president and CEO of NECEC Transmission, has been envisioning the day for at least a decade. “The project started with three engineers sitting around a table in Maine trying to find a way and the options to bring clean energy from Quebec into New England,” said Dickinson. “I think it is a fascinating story. In particular, what I find very interesting is that the majority of people in the country agree on the way forward, particularly on projects like this, where there are so clearly massive benefits of reduced carbon, but also economic benefits. This project is critical for Maine and for the region because it has such substantial environmental benefits in the reduction of greenhouse gases and such a big economic boost at a time when Maine really needs it.” The project includes 53 mi. of new transmission corridor from West Forks, Maine, to Canada, which Dickinson said will run through a logging area. The remainder of the corridor is existing. “What we did in studying the transmission system and how we might bring power in is we prioritized using existing corridors,” he said. “Two-thirds is along lines that have existed for decades. It was land we had acquired. On the new part, we had to figure out how to get from the existing corridor to Quebec. We studied the land, looked at lands that were conserved, lands that were higher impacted, tourism … we landed on a corridor to Quebec that for generations that has been heavily logged, and bought the land from two large logging companies.” The project also includes a significant upgrade to 26.5 mi. of new 345 kV transmission line between Coopers Mills substation in Windsor, Maine, and the Maine Yankees substation in Wiscasset. Additional upgrades are planned in Pownal, Sabattus and Lewiston. In July, Maine Gov. Janet Mills OK’d a deal with HydroQuebec ensuring that Maine benefits from the power generated by the NECEC. Under the agreement, Hydro-Quebec will provide up to 500,000 megawatt hours of electricity a year to the state based on a 1,200-megawatt capacity of the proposed New England Clean Energy Connect. “I have heard people say that the NECEC will deliver

power directly to Massachusetts but not to Maine,” Mills said. “With this new commitment, we ensure that Maine consumers access power directly from the line at a discounted price.” Hydro-Quebec also pledged to speed up disbursement of about $170 million in benefits for the state that were already promised in a deal with the state last year, including ratepayer relief and incentives for broadband expansion, electric vehicle charging stations and heat pumps, Dickinson said. The project calls for a total of 829 self-weathering structures, including 723 monopole structures and 106 twopole structures. During the peak season of construction,1,600 union and nonunion workers will be hired for the project with a preference given to Maine residents. In 2020, more than $320 million in contracts in connection with the project were awarded, Dickinson said. That includes $20 million in timber mat contacts split among seven Maine companies in reviewing 2020. “The timber mats are required by the permitting agencies to cross wetlands, streams and other sensitive areas,” said spokesman Ted Varipatis. “The timber mats prevent those crossings from getting rutted up and soil from being disturbed. Once the mats are in place, that gives us a travel way for both track equipment and some rubber tire equipment. Contractors will use both for this type of project. Typical equipment being used is cranes, excavators, large drills, bucket trucks, tracked dump trucks, loaders, hot saws, pulp trucks and pickups.” Major contractors are Cianbro, Northern Clearing, Irby and Sargeant Electric, all using a combination of leased and owned equipment from dealers including: Anderson Equipment Company, Nortrax Inc. and United Rentals of Maine and Enterprise Fleet Management of Missouri. Other contracts totaling $300 million were awarded to companies building and upgrading the line that will run from Quebec to Lewiston. In addition to the reduction in carbon emissions, other benefits include: • 500,000 megawatts directly to Maine at below market price; • an anticipated $18 million increase in property taxes annually in the communities the corridor will run through; • $15 million in broadband infrastructure to improve broadband access in western Maine; • $6 million in educational funds to provide for vocational and training programs in Franklin and Somerset counties, as well as for scholarships, internships and research at the University of Maine; and • $2.5M for decarbonization and Maine energy resource planning studies The transmission corridor is expected to be online in 2023.  CEG Workers set a pole for the Clean Energy Corridor project.

Proper Inspection

In this virtual event, Case experts will demonstrate the best practices in pre- and post-operation equipment inspection and why it is important to the overall health and performance of construction equipment.

Case Construction Equipment has announced the next installment of Case LIVE: The Daily Equipment Walkaround, which will be held on May 26 at 10 a.m. Central. In this virtual event, Case experts will demonstrate the best practices in pre- and post-operation equipment inspection and why it is important to the overall health and performance of construction equipment. It will be followed by a live Q&A between the audience and presenters. The webcast will be hosted by Brad Stemper, director of compact equipment, and Ted Polzer, director of product and customer support, Case Construction Equipment. “We talk a lot about Total Cost of Ownership, and one way to ensure that you are getting the most uptime and performance out of your equipment is to take a few extra minutes at the beginning and end of each day to really look over your equipment and identify any possible elements that may cause downtime,” said Stemper. “We’ll show people what we think is a great process for this, and provide them resources to help them in their work.” Case LIVE is a new virtual event platform with live events and educational sessions delivering topics that include equipment fleet management, acquisition strategies, new technologies, operational tips and new product launches. For more information on Case, visit CaseCE.com. For a full schedule of upcoming webcasts and events, visit Visit CaseCE.com/LIVE. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 31

2013 Cat 420F

2014 JD 310SK

2017 JD 410L

2000 Peterbuilt 357

2 Units Available, 4X4 E Stick, MP Loader Bucket Joy Stick Controls Ride Control App. 10K Hrs. ......................................................Call

4X4 E Stick 4-1 Loader Bucket W/Coupler, Joy Stick Controls App. 7000 Hrs ......................Call

4X4 , E Stick, 4-1 Loader Bucket W/coupler, Joy Stick Controls App. 4500 Hrs ....................$Call

W/ 18000# Knuckle Boom, 20 Ft. Dump Body 90K ORIGINAL MILES ..........................$28,500

(6) 2002 IR 185 CFM Compressors

(3) 1998 IR 525CFM Compressor

Call or E-mail Mike Pearl

914-980-8890 equipmart@aol.com Mounted on IH 4700 Trucks ......Call for Prices

EQUIPMENT WANTED

Mounted on 1998 Ford Truck ....Call for Prices

Page 32 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA

New Morbark 3400XT Wood Hog CAT 800HP engine. Call for Price and More Details! Exclusive Morbark and Rayco Dealer

Visit: www.deaconequipment.com 208 Holland Road Brimfield, MA 01010

Sales Contact: R.J. Poirier rjpoirier@rjpoirier.com 413-245-3882

Baschmann Services Names Kirsch to Represent Aggregate, Rolling Stock Peter Baschmann, president of Baschmann Services in Elma, N.Y., announced the addition of Bill Kirsch to its sales staff. Kirsch will be representing both the aggregate and rolling stock divisions of Baschmann Services, with manufacturers including Kobelco, ASV, Anaconda, Hitachi, Carlton, McLanahan and TCI. His area of responsibilities will include the counties of Orleans, Genesee, Wyoming and Alleghany. Kirsch has 10 years of experience in the medical device industry in training, sales and the sales support side of the industry. He has a strong background in machinery operation, including agricultural and construction equipment and continues today to be involved in his family’s farm. 

Bob Tracey (L), Baschmann Services sales manager, and Bill Kirsch, Baschmann Services sales representative of the counties of Orleans, Genesee, Wyoming and Alleghany.

ARTBA: Federal Investment Advanced 22K in Improvement Projects in 2020

Fax: 413-245-3522

www.rjpoirier.com

2010 CAT 773F, Good Tires, Dual Slope......................CALL (2) 2015 CAT 988K, 9 Yd, High Lift, 50% Tires ..........CALL (2) 2016 CAT 980M, Agg Handler, GP, Low Hrs ..........CALL 2011 CAT D8T, 8U w/Twin Tilt, S/S Ripper ................SOLD 2015 CAT 938M, w/Coupler ........................................CALL 2013 CAT 980K, GP, 80% L-5’s ..................................CALL

State governments leveraged $29 billion in federal funds to advance $70 billion in highway improvements during fiscal year (FY) 2020, according to new federal data. An interactive dashboard created by the American Road & Transportation Builders Association (ARTBA) provides U.S. taxpayers, elected officials, news media and the public with a clear look at how and where all 50 states use their federal highway program funds. The Federal Highway Administration (FHWA) data compiled by ARTBA’s Chief Economist Alison Premo Black displays information on more than 22,000 projects that moved forward last year. “This dashboard is chock-full of projects that are realworld outcomes of the federal highway program,” Black said. “We encourage members of Congress, their staffs and Biden administration officials to tap this valuable resource as they continue working on a robustly funded surface transportation infrastructure bill.” Nationally, 47 percent of project funds were dedicated to major repair or reconstruction work on existing highways. Adding capacity (19 percent of funds), planning, design and construction engineering (13 percent), new construction (6 percent), planning, environmental, and research and administration (3 percent) are among the other featured categories. The top five projects that moved forward nationwide in 2020 include a mix of federal, state, local and private funds.

Each project uses advance construction funds, which means that additional federal funds will be dedicated to the project in future years. Those projects are: 1) Virginia I-64 Hampton Roads Bridge Tunnel Expansion Project ($3.9 billion) 2) Indiana PR 69 New Road Construction Marion County Segment ($725 million) 3) Arkansas I-530, Highway 67 Widening and Reconstruction ($631.7 million) 4) Louisiana I-10 ($592 million) 5) Texas U.S. 290 ($556 million) The top five states with the most projects (including advance construction) are: 1) Texas: 1,249 projects 2) Ohio: 1,222 projects 3) California 1,120 projects 4) Michigan: 1,100 projects 5) Indiana: 1,041 projects The dashboard allows users to see how each state annually deployed federal funds and features the top projects dating back to 1950. ARTBA’s Black populates the dashboard using the data states submit to FHWA’s Fiscal Management Information System (FMIS). For more information, visit artbahighwaydashboard.org. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 33

F I N A N C I N G AVA I L A B L E 286 Central Ave., South Kearny, New Jersey 07032

800-255-5512 Phone 973-589-4100 • Fax 973-589-4811

E-mail: info@tes-inc.net • Website: www.tes-inc.net

2001 Link-Belt RTC 8040 SII, 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator.... ..........................................P.O.R.

2020 Talbert Hydraulic Trailer, 55 ton, 48’ x 102”, 37’ lower deck, 20,000 # winch, Aluminum wheels, Dock levelers, Remote controls P.O.R.

2015 Manitou MT625, 5,500 lb. maximum lift capacity, 19’ 2” lift height, semi enclosed cab, 60” shaft type carriage, diesel engine, F.O.B. New Jersey ..............................P.O.R.

2006 Manitou MT 8044XT, S/N: 318157, 8,000 lbs. capacity, 44’ max lift height, 3 speed powershift transmission, 4 wheel drive, F.O.B. New Jersey ......................P.O.R.

2008 Link-Belt RTC 8090, 90ton, 140’ main boom, 35’ – 58’ jib, 2 winches ..................P.O.R.

2006 Link-Belt 218 Hylab HSL, 110 ton, 140’ main boom, Tier 3 diesel engine, “ABC” ctwts, side frame ctwts, F.O.B. New Jersey ........ ..........................................P.O.R.

2015 Manitou MRT 2150P+, 11,000 lbs. capacity, 67’7” max lift height, Enclosed cab w/ heater & AC, F.O.B. New Jersey ..............................P.O.R.

2009 Shuttlelift 3340B, S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock ..............P.O.R.

2013 Manitou MT10055, 10,000 lbs. capacity, 55’ lift height, open cab, 4 speed forward/reverse, F.O.B. New Jersey ..............................P.O.R.

2007 Kalmar DCE 140-6, 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks .. ..........................................P.O.R.

2000 Manitowoc 2250, 300ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051 ....................P.O.R.

1980 Manitowoc 4100W SII, 230-ton, S/N: 41649, 150' boom ................................P.O.R.

Authorized Dealer

Page 34 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Focuses On Crucial Need for Safety Precautions CRACKS from page 1

and Demolition Operations addresses the hazards as well. Holes are defined by OSHA as gaps or spaces in a floor, roof, horiGardner believes both “are helpful zontal walking-working surface, or in defining the standard-of-care for similar surface at least 2 in. at its managing holes on construction smallest dimension. sites.” “Safety is a cornerstone of any In a Simplified Safety blog post, good business in the construction he offered a summary of industry industry,” wrote crane service comsafety regulations and standards for pany Crane Repair, Englewood, prevention of fall-through injuries. Colo. “A construction manager’s • If you make a hole, guard it. commitment to ensure safety for Before cutting the hole, barricade the everyone who steps foot on a site is work area to keep people out. essential.” • If the hole must be open, and the In a blog on its website the compafall distance is more than 6 ft., ny offers tips for preventing fallemployees must be protected by use through incidents and injuries on the of a fall arrest system, guardrails or job. covers. Noting many places a worker can • Any fall arrest system must meet fall through on a construction site, the OSHA criteria established in 1926, crane repair company said that tripping hazards often cause fallSubpart M. throughs. • A guardrail must be a minimum “Another hazard is any place on of 42 in. high, have a mid-rail and be site with excessive noise,” the comcapable of withstanding a 200-lb. pany said. “Excessive noise can make Regardless of fall distance employees be protected from tripping or stepping into holes. If a hole load. “Toe boards are recommended it hard for a worker to hear verbal is big enough to fall through, it must be covered, guarded or fall protection measures utilized. at all times; they are required for warnings about a safety hazard from work under the hole,” wrote Gardner. co-workers.” • If the hole is not guarded, it must be covCrane Repair believes the first step to preered. The cover must support at least a 200venting falls on a job site is a thorough safety lb. load. The cover must be larger than the hazard inspection. That’s where OSHA comes opening, secured against displacement and in. properly labeled or identified, such as “Floor The agency offers guidelines for inspecOpening Do Not Remove.” “If you have a tions, including identifying load limits for choice,” said Gardner, “make both the hole each job site area, potential tripping hazards, and cover round. An oversized round cover unprotected edges and areas of excessive cannot fall through a smaller round hole.” noise. • Never cover a hole with any type of non“Another critical factor in workplace safety substantial or non-weight bearing material(s) is worker training,” the company said. such as paper, cardboard or plastic. “Workers need to be kept up to date on OSHA • Industry standards require that, regardless safety requirements and your company’s poliof fall distance, employees be protected from cies regarding fall prevention.” tripping or stepping into holes by covering The proper use of fall arrest systems must the openings. be taught to ensure that if a fall does happen, “In layman’s terms, if a hole is big enough the system will stop it before the worker hits to fall through, then it must be either be covthe ground. ered, guarded or fall protection measures utiCrane Repair offers tips for preventing falls lized,” wrote Gardner. from hazardous hotspots across a construction “If it is a small hole that presents only a After creating a hole, workers should immediately cover it or put up rope around site, including unprotected edges. “An opening in a wall or a hole in the floor it. The area should be kept off limits, and coverings must support twice the weight tripping hazard for example a 4-inch diameter hole for a pipe, cover it regardless of the fall can be a falling hazard if left unprotected.” To of a worker, tools and materials. distance below the hole.” prevent a fall from an unprotected edge: Beyond Manholes • After creating an unprotected edge, immediately cover it The Contractor’s Role Open manholes aren’t the only fall-through hazard on a or put up rope to protect it; It is the general contractor’s (GC) responsibility to assure job site, according to David Gardner, construction safety • Keep areas with holes off limits; all parties properly communicate with one another, and • Hole coverings must be able to support twice the weight consultant of Simplified Safety. potential safety hazards are brought forth and discussed. “If Unprotected holes in a floor, deck or roof can result in of a worker and their tools or materials; • Do not carry materials that are big enough to block your serious injuries as well if workers are unaware of or choose you see something — say something.” Safety materials provider WeeklySafety.com notes that vision. If you must do so, be sure your fall arrest system is to ignore them. OSHA covers the rules for fall-through protection in 29 holes are one hazard area in which many workers forget to securely in place; and protect themselves and co-workers “or at minimum throw • Keep the work area clean of clutter that could cause a trip. CFR 1926 Construction Industry Regulations, Subpart M. “Falls are a risk for every construction worker. But workANSI volume A10.18 Safety Requirements for some caution tape up and call it good.” ing to prevent them in these ways can minimize the chance of Temporary Roof and Floor Holes, Wall Openings, see CRACKS page 52 them happening on your job site,” said Crane Repair. Stairways, and Other Unprotected Edges in Construction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 35

Four locations serve Maryland, Delaware, Washington, D.C. and parts of Virginia, New Jersey, and Pennsylvania Elliott & Frantz can show you the latest Gradall models, including Series IV excavators with highway speed travel capability. Featuring AutoDrive™, these models integrate a 6-speed automatic transmission and a new transfer case for efficient, simplified travel as well as convenient jobsite repositioning from the upper cab. Gradall excavators also feature the job-proven telescoping, tilting boom that enables you to do more different jobs with just one machine – even under bridges and trees.

WWW.ELLIOTTFRANTZ.COM

Delmar, DE 302-846-3033 Jessup, MD 410-792-9134 King of Prussia, PA 610-279-5200 Manassas, VA 703-257-2381

Page 36 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

• We can provide you with the world’s largest or smallest trench box or sh shoring horing system. system • Get high produ uction numbers while keeping yyour workers safe. • We will show you y how with our on-site supervission. • Contact us for the t world’s very besst shoring • We will deliver on time,

We’ll e bring it with our fleet of truckswhere you want it, when you want it. • We are told by our customers that “No one beats our service”... So don’t take our word for it, it just ask the peo ople who use our pro oduct.

RENT REN TALS T TA A LS S S A LES SALES S ER VICE SERVICE E R EP REP PAIRS P A IRS IR S • See our Entire Linee • Call for Catalogs Including: ding: Rock Boxes • Road Plaates • MightyLite® • • Hydraulic Shoring •

Fa Factory & Corporate Office: 20 07 LAKE STREET (Route (Ro te 32 32) 2) NEWBURGH, NY, 12550

1 1.845.562.4477 7

Calll us for local Metropolitan New Yor ork, Neew Jersey and Connecticut Inquiries. s.

Factory Direct Stores: Fo New England: Maine, Vermont, For e Neew Hampshire p and Weestern NY Statte Slide System with Portable Safety Rail Installed

Call our Boston area location n: 283 E Cherry Street Sh e sb , MA 01545 Shrewsbury

1.508.842.2822 Foor the Mid- Atlantic Region: Eastern Pa, So. Jersey,, Delaware, Maryland and Virginia i nia

Calll our Baltimore area locatioon: 506 Pulaski Highway Joppa, MD 21085

1.443.313.3461 O Phone Pho on ne uss Or Toll T oll Free oll FFr Fre reee from ffr fro ro om anywhere: aanyywh wh h heere re: e:

1-8 8 800 00 0 0-4 -4 407 07 7-4 -4 4674 4674 www w.americanshoring.ccom E-M Mail i us at: il t: ssaless@americanshorring.ccom o

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 37

WORK SMART FROM THE GROUND UP

Looking to maximize your day-to-day operations? New pressure-compensated loadsensing (PCLS) hydraulics on the new John Deere 310SL Backhoe Loader smoothly increase your cycle times with 16% greater rear backhoe trenching productivity* and 10% more craning capacity.** Along with John Deere Connected Support™, you can elevate your underground operation above expectations and Run Your World. JohnDeere.com/backhoes

*Based on rear backhoe trenching productivity study, compared to previous model. / **With Lift Mode enabled, compared to previous model.

CONNECTICUT

MAINE

NEW JERSEY

NEW YORK

The W.I. Clark Company

Nortrax

JESCO, Inc.

Five Star Equipment, Inc.

Nortrax

Hermon, ME 207-947-6786

118 St. Nicholas Ave. South Plainfield, NJ 908/753-8080 800/241-7070

60 Paul Rd. Rochester, NY 585/235-3011

Clifton Park, NY 518-371-5111

Wallingford, CT 203/265-6781 Danbury, CT 203/775-1203 Plainfield, CT 860/546-4808 www.wiclark.com

DELAWARE JESCO, Inc. Middletown, DE 302/376-0784

MARYLAND JESCO, Inc.

Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 District Heights, MD 301/909-7799 Waldorf, MD 301/861-2323

Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777

MASSACHUSETTS Schmidt Equipment, Inc. North Oxford, MA 508/987-8786 North Billerica, MA 978/667-4345 Plymouth, MA 508/830-9997 No. Swansea, MA 508/379-9810 Springfield, MA 413/543-5595 www.schmidtequipment.com

1275 Bloomfield Ave. Fairfield, NJ 973/227-2221 800/321-8080 1790 Route 38 Lumberton, NJ 609/267-2020 888/217-0600 www.jesco.us

1653 NY Route 11 Kirkwood, NY 607/775-2006 284 Ellicott Rd. Orchard Park, NY 716/662-2191 6500 E Taft Road Syracuse, NY 315/452-4560

Gouverneur, NY 315-287-0703

NEW HAMPSHIRE Nortrax Pembroke, NH 603-225-2769

VERMONT Nortrax

JESCO, Inc. 497 Fishkill Avenue Beacon, NY 845/831-1800 800/724-0725 110 East Jefryn Blvd. Deer Park, NY 844-482-0910

Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com

PENNSYLVANIA Five Star Equipment, Inc. 1300 East Dunham Dr. Dunmore, PA 570/346-1701 46 Route 97 Waterford, PA 814/796-2663 2585 Lycoming Creek Rd. Williamsport, PA 570/494-4030 www.fivestarequipment.com

Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com

Page 38 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABLE Equipment Rental Welcomes Action Hub… New AEM Initiative Customers to Demo Days in Pa., N.Y., N.J.

to Harness Power of Grassroots Supporters

ABLE hosted two days of demonstrations at three of its locations, including West Chester, Pa.

ABLE Equipment Rental recently welcomed customers to three of its locations for Magni Rotators Demo Days. During March and April, ABLE’s West Chester, Pa., South Plainfield, N.J., and Deer Park, N.Y., branches each hosted two days of demonstrations highlighting Magni rotating telehandlers along with the attachments that operate with these machines. The event was led by Philippe Bisson, ABLE’s business development director of rotators and tele-

Philippe Bisson led a demonstration at ABLE’s Deer Park, N.Y., location.

Customers had an opportunity to talk about their equipment needs, sit in the cab and use the remote controller to get an actual feel for the rotators at ABLE’s South Plainfield, N.J., location.

handlers, along with several of ABLE’s trainers who demonstrated the equipment. The two-day format allowed customers unfamiliar with Magni rotators to set-up pre-arranged appointments with the ABLE team for an up-close demonstration. The hands-on product demos gave customers the opportunity to test drive the Magni equipment. Customers had an opportunity to talk about their equipment needs, sit in the cab and use the remote controller to get an actual feel for the rotators. The event’s attendance was robust with 63 people representing 39 companies over the 6 days. 

The ABLE Magni Demo Days team included Philippe Bisson, ABLE’s business development director of rotators and telehandlers, and several of ABLE’s trainers.

The Association of Equipment Manufacturers (AEM) launched a new Action Hub to help its tens of thousands of grassroots supporters share the industry’s story with lawmakers and positively influence legislation that impacts the equipment manufacturing industry. The new Action Hub is part of AEM’s Year of Action, a groundbreaking initiative designed to mobilize the 2.8 million men and women of the industry through virtual and inperson activities in support of pro-manufacturing policies. The Year of Action initiative comes at a time when lawmakers across the country are considering legislation that will have a lasting impact on the equipment manufacturing industry, from considerable investments in infrastructure, workforce and rural communities to changes to the tax code and trade policy. It has never been more important for equipment manufacturers to come together and speak with one voice about the policies that are critical to the industry’s longterm growth and prosperity, AEM said. “Manufacturing is the backbone of the U.S. economy and we need our elected officials in Washington and in state capitals across the country to champion bipartisan policies that will have a positive impact on our industry and our country,” said Kip Eideberg, AEM’s senior vice president of government and industry relations. “The 2.8 million men and women of the equipment manufacturing industry work hard every day to build a better and brighter future for themselves and their communities, and the Association of Equipment Manufacturers is making sure that their voices are heard.” The Action Hub provides supporters with easy-to-use tools and resources while its gamification creates a unique advocacy experience. In addition to working together for a stronger equipment manufacturing industry, supporters will have the opportunity to engage in friendly competition as they take a series of actions and assemble their ActionTron: a manufacturing-inspired avatar. The Action Hub comes loaded with videos, graphics and educational materials to help supporters understand how decisions made by lawmakers impact their jobs, families and communities and empower them to advocate on behalf of the equipment manufacturing industry. The Year of Action is built around the Action Hub but also will feature several online campaigns in support of the industry’s key policy priorities, in-person events with lawmakers at equipment manufacturing facilities, regional “Tailgate Tours,” and both virtual and in-person fly-ins. AEM will release additional information and details about the various components of the Year of Action in the coming weeks and months. Campaign information and interactive features can be found at https://hub.imakeamerica.com/. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 39

563-8 872-44112 112

Bellevue (Dubuque), ubuque), Iowa sales@jjscheckel.com jscheckel.com

2002 CA ATT D11R - $1855,000

2009 CA ATT D10T - $468,000 $ ,

2005 CA ATT D10 D10TT - $348,000 $ ,

7PZ High g Horse series, Runs R andd oper p ates a to spec p , RJG S#, 1 Owner since new w,, 8,3000 hours h on $683,000 $ U Blade, SS ripperr,, NNew rodd & main bbearings g installed. bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Documented CAT kpile il machine hi U-blade A/C, HHeaat. Could AT Dealer D Complet p e Rebuild, SS ripper pp r,, Track ggroups p near new. Easy E y dduty stockp paint, otherwise very straight Twin tilt, tilt Well maintaine i i ed, Clean, Good frrom om multina multinational i h tractor from good home. U blade, Twin G d U/C. U/C l i i l ccompanny. AAs nice i as they h come!!

RENT OR

BUY!

2019 CA ATT D6 LGP - $348,000 $3448,000 ,

2,400 Hours, Next GGen, Warranty, W y, GPS GGrade d AAssist, d n. Ripperr,, Excellent Ex condition

RENT OR

BUY!

2014 C CA ATT 740B - $218 $2188,000 ,

7,600 Hours, 2,483 at idle, Original g pa paint, Service history,y, Oil samples p , Full workk order p ed. d complet Goodd tires, Work W k ready. Rent/Leasee or Buy. B

B POWERTRAIN PLUS REBUILDS

2013 CA ATT D9T - $618,000

5,250 Hours, 517 hrs aat idle. dl U Blade, l d MS Ripper pp r,, GPS Grade control reaadyy. Original paint, straigh ght & clean. Documented main maintenancee andd oil sample l history.

RENT OR

BUY!

2018 CA ATT D6T LGP VP PA AT - $298,000 2012 CA ATT D6T XW VP PA AT - $149,000 , 2012 CA ATT D6T LGP L VP PA AT - $139,000 , 2018 CA ATT 39 390FL, 90FL, A02819 - $628,000 , 2,690 Hrs, 3 Year Year po p wertrain waarranty remaining. Accugr g ade AROO GPS ready readyy, 100% % New N trackk ggroups p being installed. As nice as they coome. Rent or Buyy.. i

RENT OR

BUY!

6,250 Hrs, 1,472 idle, ARO CCAT AT Acc A ugr g ade d GPS Ready. 8,500 Hours, 2,700 att idle. CAT Accugr g ade, d ARO, ARO GPS 5,780 Totall hhrs, 1,550 at idle idle. 2 Year Year pparts/labor /labor CCat bll d . Straight S ih ight. 27’ Boom, Erops, A/C, Diff Steerr,, VPPAAT 6-wayy blade readyy. Erops p , A/C, Diiff steerr,, Goodd underrccarriage g . Warrantyy remainss. 1 Ownerr.. Super p straigh and clean. Rent//Lease or Buy. Original, machine. Rent/Lease or BBuy. 14’ Stickk, 77”” Bu Bucket, Aux hydraulics, B i l super clean m d li EExcellent U/C.

RENT OR

BUY!

Reputa p tion 1-owner machine, Full histoory since new w,, 7,200 Original g hrs, Reputa p tion machine, m Straigh g t, 00 Total 11’10” 0” Stick. 10”” SStick i k, 72”” Bucket, 10,0,4400 T hrs, Straigh g t, clean, fresh ppaiint.11’ S clean, original gi l. 11’1 11’10” B Goodd U/C w/ Quick coupler p r,, 66”” Bucket, B k New trackk grooups, 36”” pads. pads 32”” tr trackk pads. d Komatsu dealer teested & inspected.

BUY!

RENT OR

BUY!

2012 Komats atsu PC800LC-8 - $358 $358,000 2006 Ko Komat atsu PC800LC C-8 - $33 $338,000 ,

RENT OR

2004 CA ATT D10T D - $350,000 $ ,

RJG Series, 23,037 hours ours, 4,701 idle dl hours, h Single S shank ripper pp r,, U blade de with ttwin Tilt. A/C, Heat. CAT AATT dealer main ned, Serviced and ready to go. d l maintain

2013 CA ATT 329EL 329EEL - $114,000 ,

4,700 Hours, New 54”” bu bbuck ucket k , 10’6”” Stick, S i k Fullyy

loaded, Longg and Wide UC, PPattern changer g , Excellent ll

condition, o O Original paint.. Rent/Lease /L or Buy.

2014 CA ATT 988K 9 - $338,000 ,

9,417 Original g hrs, 2 Ye Yearr,, FFactoryy Powertrain i Warranty W remains. Yard spade p nose bucket, i RRide id controol. 10 Yar r d to go! Straight, clean, fuully testedd andd ready

RENT OR

(2)2015 ) Voolvo A40G - $228,000 , EA. Matching M hi g pairr,r, 6,100 00 Hours, H Tailga ilg tes, Excellent Ex llen bb r,, 1 Ow Owner reputation trucks k with full rubber d documented d history.

RENT OR

BUY!

(3)2011-2014 ) C CA ATT 740B’ 740B’s $$168, 168,00000 - $178, $178,000 EA.

2015 C CA ATT 836K K - $448,000 $ ,

HIGH REACH CONVERSIONS

HOLMES SMOOTH DRUM ROLLERBLADES

2015 C CA ATT 836K 8 - $458,000

2008 CA CATT CP56 C - $89,000 $ ,

l d Cab, A/C, 10,900 Total frame hours, h 5,978 978 aat idle dl , only ly 4,922 of 1 Year Year factory fac y Warrantyy remainingg, 8,275 Totall hours, 84”Vibratoryy ppad foot, 2,585 Hrs, Enclosed p ion, Original g paint, Veryy well maint’d, p ation”” hourss. Very goodd feet.. SService 2,937 at idle, onlyy 5,338 p ation. Service Front blade option, i 3 8 hhours in oper 338 11,500 Hours, Dealer D maintained, i i d, Service S hi history,y Oil actual “in-oper Fully Serviced & r ready d to go. Rent/L ease or Buyy.. l S i d R d . E ll f C l history since new. All syste ems tested to OEM spec. history since new. Exce ellent feet. Clean, ready to work. samples, Full work order done. Goood tires, Tailgates.

RENT OR

BUY!

NEW! Ready to ship!

2006 CA ATT D10T Rebuild In n Process - $885,000. Zero hour Powertrain Plus, OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

2017 CA ATT 349FL UHD D - $458,000 ,

Zero hours on custom Ultr Ul a-High H gh RReachh Demolition l Conversion. 96’6” Total reach, u attach boom & h, Quick lines, Hydraulic tilt cab, Highest quality pkg.

visit

Holmes 11F - $23,00 $23,0 ,000 / 16F - $29,000

2016 CA ATT 627K 6 - $478,000 8,000

2018 CA AT RM500B - $580 $580,000

mainingg 2 year parts/service factoryy p , A/C, 33.25+29 25+29 Rubberr,, 978 Hours. Remaining 2 Models, 11’’ or 16’ cutting width. Made in Iowa. 5,070 Hours, Push/Pulll, Erops Original paint, Full documented histtory,y, Under h Universall rotor Cat Warrantyy. 1 Owner Ow machine, Construction ggrade, extreemee dduty. For haul h l road & site ddealer l care since new, will not disappoin sappoint! leveling, compacting & sealing dir di t prior to rain event. for both AAsphhalt Reclamation or Soil Mixing. for

JJSccheckel.com

and w watch our new company video! deo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8TT,, D9TT,, D10TT,, D11T Large Excavators - Cat 374FL, L, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel.com | www. jjsscheckel.com scheckel com | follow us for forr daily updates:

Page 40 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Northeast A. Montano amontanoco.com Saugerties, NY 845-247-0206

Lorusso Heavy Equip, LLC lhequip.com Walpole, MA 508-660-7600

TB Equip & Rental tbequipment.net Bangor, ME 207-262-0014

All Island Equip Corp allislandequipment.com West Babylon, NY 631-643-2605

Modern Group Ltd. moderngroup.com Bristol, PA 800-866-3376 Allentown, PA 610-398-1101 York, PA 800-866-3376 Edison, NJ 800-866-3376 Hasbrouck Heights, NJ 201-288-1441

Tracey Road Equip, Inc. traceyroad.com Watertown, NY 315-788-0200 Albany, NY 518-438-1100 Binghamton, NY 607-775-5010 Syracuse, NY 315-437-1471

Butler Equip butlerequip.com West Hartford, CT 860-233-5439 Chappell Tractor chappelltractor.com Milford, NH 603-673-2640 Brentwood, NH 800-616-5666 Concord, NH 800-358-6007 Correlli, Inc. Dundalk, MD 443-503-5641 George & Swede georgeandswede.co Pavillion, NY 585-584-3425 Highway Equip Co. highway-equipment.com Zelienople (Pittsburgh), PA 724-452-7800 Dubois, PA 814-371-3600 Millstone TWP, NJ 732-446-7600 Kahn Tractor & Equip Inc. kahntractor.com N Franklin, CT 860-642-7596 hceamericas.com

Pete’s Equip Sales & Rentals Inc. petesequipmentvt.com Morrisville, VT 802-888-5138 Quality Fleet Service, Inc. qualityfleetservice.com South Hadley, MA 413-213-0632 Seaview Equipment seaviewequipment.com Bridgeport, CT 203-330-0130

West Virginia Tractor Co. wvtractor.com Charleston, WV 304-346-5301 Whited Equipment whitedtruck.com Auburn, ME 207-786-3673 Presque Isle, ME 207-764-7300 Saco, ME 207-391-6250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 41

READY TO OUT-WEIGH THE COMPETITION

Hyundai wheel loaders come standard with an auto-weighing system that weighs accurately to within plus or minus 1%. With better payload management, you can operate more efficiently and maximize profitability.

hceamericas.com

Page 42 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Canyon Springs Landscaping Relies On Alta Equipment

Ryan Thrasher’s JCB 409 compact loader is an important part of the fleet.

When Ryan Thrasher left the Army, he started a landscaping business in San Antonio, Texas. Five years later, he packed up his family and moved from San Antonio to Canyon Springs’ JCB 48Z mini-excavator manipulates a stone pile while on the site of an indoor horse-riding Maine, where his business, Canyon Springs arena in southern Maine. Landscaping, has matured and diversified. speed axle so it can really zip The company’s goal according to Thrasher around. It’s definitely boosted prois “to change the status quo of landscaping duction on this project by quite a providers by offering intuitive, industry-leadbit. The JCB 48Z excavator has ing solutions, and ensuring that all projects been another great addition to our are completed to the highest industry stanfleet. It’s surprisingly strong for its dards with customer service as a top priority size. We use it on every job we go and dedicated to the promise of quality.” to and it certainly saves us an awful The firm does a wide variety of services, lot of shoveling.” including landscaping, hardscaping, water Thrasher also appreciates the features, road and path building, and aquasJCB’s operator comfort and reputacaping. tion for safety. “We pride ourselves on being a one-stop “We use these machines for winshop,” Thrasher said. tertime plowing. After a big storm, Being a one-stop shop requires a wide we can spend as much as 20 or 30 variety of equipment, and Thrasher’s brand hours at a time sitting in the cab of of choice is JCB. a skid steer or loader, so comfort is On the site of a recent project — constructkey. Anytime added safety measing an indoor horse-riding arena, including a ures come into play it’s a big gravel roadway, in southern Maine — bonus, particularly the way the skid Canyon Springs Landscaping had an assortsteer is designed with the sidement of JCB earthmoving equipment, entry cab.” including a 48Z excavator, a 409 loader, a 260T tracked skid steer and a model 190 Canyon Springs Landscaping moves material with its JCB 260T tracked loader. Dealer Support Key wheeled skid steer. Canyon Springs Landscaping’s JCB dealer is Alta “I’m a big fan of JCB,” Thrasher said. Equipment Company, and Thrasher doesn’t hesitate to “They are by far the best machines I have refer the dealer — and his sales rep — to his associates, run, and I have run a lot of machines. In my including other landscaping contractors. opinion they can’t be beat. We use them in “The people behind the dealership are very important our snow removal operation; there’s no to us. Our rep from Alta Equipment Company is worry about slippage or tipping over or Richard Loabe and he’s been incredibly helpful to us. issues with attachments, which is very He regularly goes above and beyond to help us out. He important. The way their system is designed will go pick up parts for us and or get us in touch with I never have to crawl under a bucket. The cab the right people when we need support. And it’s not just offers better visibility, which is always a plus. Ryan Thrasher Richard. Alta’s service department has been great. We “The JCB 409 wheel loader is also an Canyon Springs Landscaping important part of our fleet. It’s got the highsee CANYON page 101

“After a big storm, we can spend as much as 20 or 30 hours at a time sitting in the cab of a skid steer or loader, so comfort is key.”

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 43

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Page 44 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doosan Bobcat Develops New Mobile Training Lab

The lab comes equipped with a climate-controlled classroom style learning area with welding bays for up to six students at a time.

In order to meet the growing demand for skilled welding professionals, Doosan Bobcat has developed a mobile training lab. The lab is currently based in Litchfield, Minn., and will be traveling throughout Doosan Bobcat’s North America factory locations later in 2021 to bring comprehensive weld training to new and existing employees. As an economical, consistent and efficient solution, the lab provides innovative opportunities to cultivate the next generation of skilled labor professionals. The lab comes equipped with a climatecontrolled classroom style learning area with welding bays for up to six students at a time. The welding equipment mirrors the same units that Bobcat uses at its production facilities. Steve Morlock, manufacturing trainer at

Doosan Bobcat, used his deep welding leadership experience to standardize the training curriculum across the company’s production facilities. “The training lab allows us as an organization to be more flexible when planning skills for operational needs. We can now provide a better training experience to every employee without distractions from the production floor, along with the flexibility to go directly from a classroom environment to hands-on training in seconds. In addition, being able to pack up and move from location to location as needs arrive is a businesscentered and agile approach to training,” Morlock said. Novice to advanced training programs are provided, and to date 160 Doosan Bobcat employees have be trained. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 45

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Absolute Equipment

www.absoluteequip.com PENNSYLVANIA Pittsburgh (412) 931-6655 (866) 931-6655

Hoffman Equipment www.hoffmanequip.com NEW JERSEY Piscataway (732) 752-3600

Deptford (856) 227-6400 NEW YORK Bronx (718) 822-1180

Marlboro (854) 236-3000 Medford (631) 207-2900

Highway Equipment & Supply Co. www.hwyequip.com PENNSYLVANIA Drums (570) 788-1127 Harrisburg (717) 564-3031 Ephrata (717) 859-3132 Lock Haven (570) 769-1070

Tyler Equipment Corporation

www.tylerequipment.com

Walter S. Pratt & Son

CONNECTICUT Berlin (800) 352-4473 Parts: (860) 356-0848 Fax: (860) 828-6727 MASSACHUSETTS East Longmeadow (800) 292-6351 Parts: (877) 255-6351 Fax: (413) 525-6840

PENNSYLVANIA (610) 363-9200

MAKE POWER MOVES.

www.prattandsons.com NEW YORK Rensselaer (Albany) (518) 465-1549

Washington Air Compressor Rental Co. www.washair.net MARYLAND Frederick (301) 662-7711

Hyattsville (301) 277-1300

DISTRICT OF COLUMBIA Washington (202) 635-1500 VIRGINIA Chantilly (703) 742-6200

Page 46 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Grove TM9120 White Truck Crane, 1:50 scale - $175

Grove TM1500 Truck Crane with Lattice Boom, 1:55 scale - $125

Schwing Truck Mounted Concrete Pump, 1:50 scale - $110

Hyundai 290LC-3 Excavator, 1:50 scale - $100

Komatsu D475A Dozer w/ripper, 1:50 scale - $100

Komatsu PC650 Hydraulic Shovel, 1:50 scale - $100

Volvo BM A25B Articulated Truck, 1:50 scale - $100

Caterpillar 988B Wheel Loader, 1:50 scale - $85

Caterpillar 12G Motor Grader, 1:50 scale - $75

Conexpo 2008 Silver Edition AEM Wheel Loader, 1:50 scale - $75

Caterpillar 215 Excavator, 1:50 scale - $75

Grove MZ 76 Manlift, 1:50 scale - $75

Liebherr 921 Wheeled Excavator w/clamshell bucket, 1:50 scale - $60

Caterpillar 416 Backhoe/Loader, 1:50 scale - $60

John Deere 850J Dozer w/ripper, $50

Caterpillar 953 Traxcavator, 1:50 scale - $60

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 47

Abele Tractor & Equipment Co., Inc. www.abeletractor.com Albany, NY 12205 518/438-4444 Cherry Valley Tractor www.cherryvalleytractor.com Marlton, NJ 08053 856/983-0111 Erb & Henry Equip., Inc. www.erbhenry.com New Berlinville, PA 19545 610/367-2169

ADMAR Construction Equipment & Supplies www.admarsupply.com Vestal, NY 13850 607/798-0333 Tonawanda, NY 14217 716/873-8000 Canandaigua, NY 14424 585/396-0031 Rochester, NY 14623 585/272-9390 Cicero, NY 13039 315/433-5000

F&W Equipment www.fwequip.com Orange, CT 06477 203/795-0591

Marshall Machinery, Inc. www.marshall-machinery.com Honesdale, PA 18431 570/729-7117 Tannersville, PA 18372 570/895-4884 Middletown, NY 10940 845/343-6683 South Abington Township, PA 18411 570/489-3642

Reading Tractor and Equipment www.readingtractor.com 5538 Pottsville Pike Leesport, PA 19533 610/926-2441

Westchester Tractor Inc. www.wtractor.com Brewster, NY 10509 845/278-7766

Eagle Power & Equipment Company www.eaglepowerandequipment.com West Chester, PA 19380 610/458-7054 Doylestown, PA 18901 215/348-9041

Chappell Tractor www.chappelltractor.com 454 Route 13 South Milford, NH 03055 603/673-2640 ABLE Equipment Rental www.ableequipment.com Deer Park, NY 11729 866/468-2666 631/841-3333 Highway Equipment Company www.highway-equipment.com Millstone Township, NJ 08535 732/446-7600

Page 48 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Anselmi & DeCicco Contends With Limited Staging Area BRIDGE from page 1

The bridge, which had been eligible for the National Register of Historic Places, is a two-span pin-connected pratt through truss with a skew, which is not common. It also features a lattice railing. Constructed in 1905 following the 1903 flood event, which carried away the existing bridge, it was reduced to only one lane several years ago. The bridge is being completely replaced. The superstructure was designed so that the lowest point of the bridge will be above the 100-year flood elevation. The contract was awarded to Anselmi & DeCicco of Maplewood, N.J., for a contract amount of $12.3 million. The project is making use of a federal grant administered through the New Jersey Department of Transportation (NJDOT). “The biggest challenge is the limited staging area due to site constraints,” said Mahbuba. “At one end is the intersection with Route 20, and at the other The bridge is being completely replaced. The superstructure was Fair Lawn Avenue Bridge has served the comend is a residential area.” Currently, the contractor is starting to clear the designed so that the lowest point of the bridge will be above the 100- munity well, but time has run out for the aging, outdated overpass. site, and preparing for the takedown of the bridge. year flood elevation. Already, crews have performed some early work on removal of the concrete sidewalk on the bridge. The new bridge will feature steel plate girders with reinforced concrete deck supported on reinforced concrete abutments and pier. The bridge is now closed, with motorists being detoured for the duration of the project. The structure has been shut down to eastbound traffic since 2016 and will remain so during construction. The long-awaited demolition involves the removal of the existing superstructure. This includes trusses, sidewalk, bridge railing, deck, stringers and floor beams, as well as substructure, which involves abutments, pier, foundations and retaining walls. According to Mahbuba, completely replacing the bridge is a major undertaking that required a great deal of planning and cooperation. “This involves the removal of the entire bridge structure and construction of a new bridge on the same alignment.” According to County Engineer Jonathan Pera, excavators, front loaders, backhoes and cranes will be the main equipment needed to complete the work. Main materials required on the project include steel and reinforced conThe existing structure, also known as the Fifth Avenue Bridge, has served two narrow lanes of traffic over the crete. It’s estimated that approximately 2,300 cu. yds. of mate- Passaic River at the border between the borough of Fair Lawn in Bergen County and the city of Paterson in Passaic County. rial will be excavated during construction. The new bridge will include a sidewalk on the upstream side of the bridge, two full travel lanes, widening at the Bridge is the only example of its type in the county and is “In August 1886, the Bergen County Freeholders passed a intersection of Route 20 to improve truck access, traffic sig- significant in that it marks the transition from pinned to riv- resolution about completely rebuilding the bridge. nal improvements on Fair Lawn Avenue and localized eted field connections. Located in an urban area, it has Presumably, they wanted to replace the 1872 structure. The drainage improvements. endured from a time when load and traffic needs were much Passaic County Freeholders didn’t want to rebuild the “The width of the new bridge will accommodate for two different than they are today. It serves as a prime example of bridge, instead opting to repair it. Cost factors must have figlanes of thru traffic, one left turning lane and one six-foot its truss type and fabrication technology. ured in their decision. The Bergen Freeholders, apparently sidewalk,” said Mahbuba. E. A. Smyk, Passaic County historian, noted, “Erecting a more than disappointed, retaliated by closing off the entire In early 2019, officials held a public information meeting structure at this location was discussed between the Passaic bridge without telling their Passaic counterparts. The where they shared interactive presentations, graphic displays and Bergen County Freeholders in 1872, as a joint venture. response probably triggered some sort of ruckus in the halls of the project information, and questions and answers ses- From what I gather, this was the first county bridge to occu- of government.” sions to those affected by the eventual construction. The py that specific location. In September of that year, the Dewberry, a professional services firm headquartered in bridge is being replaced with a wider two-lane, two-way Paterson Daily Press reported how the Bergen County Fairfax, Va., was chosen to design the replacement bridge. bridge constructed at approximately the same location. Freeholders visited the site and agreed to build the bridge in Construction on the project began in early March 2021 and According to bridgehunters.org, the Fair Lawn Avenue conjunction with the Passaic Freeholder Board. is expected to be completed by November 2023.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 49

www.andersonequip.com NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822

PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-5311 Somerset, PA 814/443-2867

NEW HAMPSHIRE Lancaster, NH 603/788-6595 Manchester, NH 603/627-7696

VERMONT East Montpelier, VT 802/223-9689

MAINE Bangor, ME 207/942-0177 Gorham, ME 207/591-5482

www.cn-wood.com Avon, MA 508/584-8484 Woburn, MA 781/935-1919

Whately, MA 413/665-7009 Johnston, RI 401/942-9191

“THEY JUS ST WORK BETTER! W A TRUSTEED NAME.

Danbury, CT 203/743-0088 Newington, CT 860/665-7470 Laurel, DE 302/715-5382 Baltimore, MD 410/247-2100 South Plainfield, NJ 908/561-9000 Winslow Township, NJ 856/767-5900 Holbrook, NY 631/563-7600 Holmes, NY 845/878-4004

New York City, NY 718/626-3331 Pine Bush, NY 845/744-2006 Yonkers, NY 914/738-5100 Frackville, PA 570/874-6140 Harrisburg, PA 717/652-3190 Hatfield, PA 215/822-0145 State College, PA 814/308-5660 Wilkes-Barre, PA 570/824-9891

“At Selge Constrruction, we’re a family business. s. We’ve a wide range of pprojects, built on a foundation of integrity knowledge and qquality workmanship. Selge hass gained respect throughout the Midwest for the highest quality work built in the safest way possiible. Komatsu builds a quality product that performs as prom mised and helps us get the job done. Th why Komatsu woorks for me!”

Marv Selge ge / Selge Construction, Inc. / Niles, MI

That’s t s why hy I am K Koma matsu ts komatsuamerica.com

Page 50 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Above. Ahead. Always.

Visit demagmobilecranes.com to find your local distributor. 7021 Performance Drive N. Syracuse, NY 13212 800-342-7575

12 Mear Road Holbrook, MA 02343 508-868-7734

9 Finderne Avenue, Ste 7 Bridgewater, NJ 08807 908-203-0400

www.empirecrane.com

Authorized Cranes Distributor © Tadano Demag GmbH 2019. Demag is a trademark of Demag IP Holdings GmbH.

12:49

JCB Announces Diesel Mechanic Apprenticeship Program

A JCB is looking for talented and ambitious team members who have achieved or are currently pursuing their diesel mechanic certificate to join its diesel mechanic apprenticeship program.

JCB North America announced the creation of a diesel mechanic apprenticeship program that comes with a $2,000 signing bonus for eligible new hires. As part of JCB North America’s continued commitment to workforce development in the Coastal Region and following the success of the current manufacturing apprenticeship program, JCB is looking for talented and ambitious team members who have achieved or are currently pursuing their diesel mechanic certificate to join its diesel mechanic apprenticeship program. JCB North America manufactures skid steer loaders, compact track loaders and defense equipment, and markets a range of more than 300 machines via a network of more than 320 dealer locations throughout the United States and Canada. “JCB is excited to announce the formalization of our new diesel mechanic apprenticeship program,” said Tonya Poole, vice president of human resources of JCB North America. “As our business continues to grow in all areas, so has our need for specialized team members, and with the addition of the signing bonus, we feel JCB is demonstrating that commitment to hiring and retaining the very best talent in our area to provide our customers with the highest quality product in the industry.” JCB also will provide selected team members pathways within manufacturing to include design, testing and product support teams as the business continues to grow. The $2,000 signing bonus will be provided to team members that possess a diesel mechanic certificate upon hire and agree to an 18month employment contract. JCB offers competitive compensation and comprehensive benefits packages and is an equal opportunity employer and a drug free workplace. Applicants are required to submit to standard pre-employment screening. Interested applicants should send current resumes to jcbnaresumes@jcb.com and include Diesel Tech Apprenticeship in the subject line. For more information, visit www.jcb.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 51

Cat® small excavators are engineered with more re digging and lifting capability that make large jobs in tight spaces possible at a low cost per hour. That means more productive and more profitab ble jobs. And now, you can take advantage of the latest offer for or these machines and get big savings — a low financing rate to lower your payments and free up cash. Small excavators. Big savings. Exactly the right size for you.

CURRENT OFFER INCLUDES: • 0.99% for 36 Months • 3yr/3,000hr Powertrain + Hydraulics + Technology • 3yr VisionLink®-DAILY

• 3yr/1,500hr Preventive Maintennance Kit (no fluids) • Extended Protection Plan

This special financing rate is available on eligib ble new models through June 30, 2021. Stop in for more detailss and to see a list of eligible models dels or visit NECatDealers com/GCI. NECatDealers.com/GCI

T MILTOONN CCAAAT Since 1923

SINCE 1948 Cleveland Brothers

SINCE 1957 Foley, Incorporrated

SINCE 1923 H.O. Penn Machinery

SINCE 1960 Milton CAT

www.clevelandbrothers.com Serving Pennsylvania and northern West Virginia 844-720-4CAT

www.foleyinc.com m Serving New Jerssey, eastern Pennsylvania, norrthern Delaware and Staten Island 732-885-5555

www.hopenn.com Serving Connecticut and southern New York o 844-CAT-1923

www.miltoncaat.com Serving Masssachusetts, Maine, New Hampshire, Vermont, Rhode Island, and Upstate New York o 866-385-85388

CAT ON CA TON MILLTO

N PENNN H OO. PE H.

AD EVEELAN CLLEEV OLEEEYY, INNCCC.. FOL BROTTHHHEEERRSS FO

3 CONV

Offer valid from January 1, 2021, to June 30, 2021, on eligible new Cat machines. Financing and published rate are subject to credit approval through Cat Financial. Not all customers m may qualify. Offer available only at participating Cat dealers. Flexible payment terms and lease products available to those who qualify. Offer is available to custome ers in the USA and Canada only. Offer may change without prior notice and additional terms and conditions ions may apply. Please see your participating Cat dealer for details. © 2021 Caterpillar.. All Rights Reserved. CAT T, CATERPILLAR, LET’S DO THE WOR RK, their respective logos, “Caterpillar Corporate Yellow”, the “Power Edge” and Cat “Modern Hex” trade de dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.cat.com / www.cateerpillar.com .

Page 52 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Company Makes Recommendations to Reduce Extreme Injury From Falls

ANDERSON EQUIPMENT CO. 1000 Washington Pike, Bridgeville, PA 15017 412-343-2300 Pleasant Valley, WV 304-366-3075 South Charleston, WV 304-756-2800 www.andersonequip.com

TRACEY ROAD EQUIPMENT East Syracuse, NY 315-437-1471 Kirkwood, NY 607-775-5010 Henrietta, NY 585-334-5120 Adams Center, NY 315-788-0200 Utica, NY 315-765-8746 • 800-872-2390 www.traceyroad.com

Tripping hazards often cause fall-throughs, as does excessive noise. Noise can make it difficult for workers to hear verbal warnings from co-workers. CRACKS from page 34

OSHA General Industry Standard 1910.28 states employees are to be protected from tripping or stepping into or through any hole less than 4 ft. above a lower level by covers or guardrail systems. Floor holes can be guarded or protected by guardrails, covers and other conventional fall protection methods, according to WeeklySafety. • Walking and working areas and rooftops should be inspected for potential floor holes, including skylights. • Guardrails used around floor holes must meet specific construction guidelines to prevent falls to lower levels and erected on all unprotected sides or edges. • Body belts are prohibited and may not be used as part of a fall protection system. OSHA Construction Standard 1926.502(b) Guardrail Systems states that guardrails must have a top rail 42 in. high and strong enough to withstand 200 lbs. of force. Mid rails must be 21 in. high and strong enough to withstand 150 lbs. of force, and guardrail systems used at holes must be erected on all unprotected sides or edges of the hole. “When used to protect employees, hole covers must be able to support two times the weight of the employees, equipment and materials,” according to a WeeklySafety.com blog. Hole covers must be color coded or marked with the word “Hole” or “Cover.” OSHA Standard 1926.501 says that each employee on a walking/working surface must be protected from falling

through and tripping in or stepping into or through holes. • Hatchways and chute floors are also considered floor holes and must have protection. • A hinged door may be used to prevent accidents involving hatches and chutes that may be located on industrial floors or roofs. • Removable railings should stay in place, even when the opening is not in use. • When materials are going into a floor chute, protection must be provided to prevent falls through the opening. “Never assume everyone will see the hole and step around it, or think that caution tape is enough,” said WeeklySafety. “A slip or trip near the hole can result in a serious injury or worse. Proper covers, guardrails and signage must be utilized on and near floor hole hazards.” When Fall-Throughs Happen When falls do happen, steps can be taken to decrease the possibility of extreme injury. Here are Crane Repair’s suggestions: • Cap all exposed steel rebar to minimize injury if a worker should fall onto it. • Require helmets at all times to protect against traumatic head injury • Use fall arrest systems to stop a fall in progress To further increase safety on your site, stay informed about the latest in worker safety, including OSHA’s resources for safety training. “Establishing and following thorough safety protocol helps keep everyone safe.”  CEG

HIGHWAY EQUIPMENT COMPANY Zelienople, PA 724-452-7800 Dubois, PA 814-371-3600 McKean, PA 814-476-7755 Millstone Township, NJ 732-446-7600 www.highway-equipment.com

ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631-643-2605 www.allislandequipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 53

WESTCHESTER TRACTOR

BASCHMANN SERVICES, INC.

COMPANY WRENCH, LTD.

ROBERT H. FINKE AND SONS, INC.

Brewster, NY 845-278-7766 www.wtractor.com

Elma, NY 888-655-1101 www.baschmann.com

Williamstown, NJ 856-404-9618 www.companywrench.com

Selkirk, NY 518-767-9331 www.finkeequipment.com

Page 54 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MILTON CAT

CLEVELAND BROTHERS

www.miltoncat.com Milford, MA 508-634-3400 Wareham, MA 508-291-1200

Cranston, RI 401-946-6350 Richmond, VT 802-434-4228

Scarborough, ME 207-883-9586 Brewer, ME 207-989-1890 Londonderry, NH 603-665-4500 Clifton Park, NY 518-877-8000

Syracuse, NY 315-476-9981 Batavia, NY 585-815-6200 Binghamton, NY 607-772-6500 North Reading, MA 978-276-2400

Murrysvile, PA 888-232-2016 Harrisburg, PA 717-564-2121 Clearfield, PA 814-765-1611 Ephrata/Lancaster, PA 717-859-4905

www.clevelandbrothers.com Mansfield, PA Erie, PA 570-662-7171 814-898-3388 Mount Pleasant, PA Frackville, PA 724-696-4080 570-874-3560 Pittston, PA Indiana, PA 570-883-1044 724-463-8743 Somerset, PA Kane, PA 814-445-7915 814-778-5250

State College, PA 814-237-8338 Turbotville, PA 570-538-2551 Wilkes-Barre, PA 570-822-8141

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 55

LLO OAD OA AD DU UP TO UPT

Operating Cappacity 1,050 to 4,2000 lbs.

w Rate Finance 0% Low Opttions Available 17 Loaders

35 - 120 hp options

CONTTACT A YOUR LOCAL GEHL ACT HL DEALER R TODA AY! Y!

sales@admarsupply.com www.admarsupply.com

www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631/643-2605

www.NorrisSales.com

878 Old Albany Shaker Road Latham, NY 12110 518/690-0750

1394 Military Road Tonawanda, NY 14217 716/873-8000

3001 West 17th Street Erie, PA 16505 814/833-7761

7800 Brewerton Road Cicero, NY 13039 315/433-5000

449 Commerce Road Vestal, NY 13850 607/798-0333

2390 Rochester Road Canandaigua, NY 14424 585/396-0031

1950 Brighton Henrietta Town Line Road Rochester, NY 14623 585/272-9390

121 Armstrong Road Pittston, PA 18640 570/299-5505

*AT PARTICIPATING DEALERS. EXPIRES .3 .21

SOLID DESIGN SOLID DES SIGN

1010 Conshohocken Rd. Conshohocken, PA 19428 610/279-5777 1-800/457-RENT (7368)

668 Berlin Cross Keys Road Sicklerville, NJ 08081 856/740-1400 866/80-TOOLS (86657)

Page 56 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 57

Contact your local dealer:

Highway Equipment & Supply Co. www.hwyequip.com Harrisburg, PA 717.564.3031 Drums, PA 570.788.1127 Ephrata, PA 717.859.3132 Lock Haven, PA 570.769.1070

Hoffman Equipment www.hoffmanequip.com Corporate Headquarters Piscataway, NJ 732.752.3600 Deptford, NJ 856.227.6400 Lionville, PA 610.363.9200 Bronx, NY 718.822.1180 Local Dealer Medford, NY 631.207.2900

Local dealer address 000.000.0000 www.localdealerweb.xx

Rudd

Local Dealer Local dealer address Pittsburgh, PA 412.741.1731 000.000.0000 Clearfield, PA 814.765.8500 Louisville, www.localdealerweb.xx KY 502.456.4050 www.ruddequipment.com

Charleston, WV 304.755.7788

Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx Tyler Equipment www.tylerequipment.com Local Dealer East Longmeadow, MA address 413.525.6351 Local dealer Berlin, CT 000.000.0000 860.356.0840 www.localdealerweb.xx

Raw efficiency and the lowest cost of ownership.

THAT’S the volvo EX FACTOR.

Local Dealer AltaEquipNY.com Local dealer address Syracuse, 000.000.0000 NY 833-NY-ALTA-1 Albany, NYwww.localdealerweb.xx 833-NY-ALTA-2 Batavia, NY 833-NY-ALTA-3

Local Dealer Local dealer address 000.000.0000 Woodcowww.localdealerweb.xx Machinery www.woodcomachinery.com Headquarters Woburn, MA 781.935.1919 Avon, MA 508.584.8484 Johnston, RI 401.942.9191

DEALER LOGO

Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx Authorized dealer for Volvo Construction Equipment

You’re not just building something new, you’re also building a business. That means running a fleet that is designed from the ground up to maximize every dollar you spend and hold its value over time. Add an EC200E with a great low rate and confidently tackle the challenges of tomorrow with purpose-built efficiency from Volvo. Contact your local [Dealer Name] location to learn more today!

Page 58 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pages 59-78

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

MB Crusher Helps Every Site Become Recycling Centers Produce your building material, using your heavy equipment, wherever the job site is located. This is the easiest solution for many companies now that procurement is becoming more complex, expensive and it takes longer. And it is also the practical solution when the construction sites are located in areas where heavy vehicles have a hard time reaching it, where there aren’t connecting roads or in historical centres with traffic restrictions. For example, in Bulgaria, a company had to demolish an old house and had limited When a landslide damaged the Santo Spirito bridge in Italy, an MB crusher and screening bucket helped the contractor exceed standards. space. They installed an MB-L160 crusher bucket on the Case backIn France, a company constructing hoe loader they already had on-site, making 745 housing units used an MB-S18 screening bucket to select the fine it quick and easy to load the debris, crush it materials. on site and obtain quality material that they could reuse as the foundation for the new homes. They saved time and reduced their expenses: they didn’t need to process the material further by transporting it and repurchase it from the recycling centre or a quarry. The result? A material that all companies can obtain on-site at no extra cost. This applies to those who work on large In Bulgaria, a company installed an MB-L160 crusher or small urban redevelopment sites or those bucket on a Case backhoe loader to demolish an old house. often involved in road works, bridge demolitions, or road construction, and those who disposal fees and material purchasing fees. also work in quarries. Materials can be Thierry Bastide, manager of Société Travaux Publics reused to create internal roads, fill holes and Bastide, the company in charge of the contract, said, “the reduce management costs by half. advantage is that you put back the materials that you have With MB Crusher’s equipment, you set extracted.” up an actual recycling center on-site, with The advantages don’t stop at reducing transportation fees the following advantages: independence and the cost of treating or disposing of waste but extend to from other suppliers, reduced processing the material’s quality. A recent example is when the Santo times, eliminating transportation costs, Spirito bridge in Puglia, Italy, was damaged by a landslide ready-to-use quality material. and needed to be demolished. The company used MB’s In Nimes, France, a company constructThey recycled all of the material: the MB-S18 screening crusher and screening bucket to crush and reduce the mateing 745 housing units needed to redevelop an old farm road for inter-district service and excavate and create a drainage bucket selected the fine materials, while the BF80.3 crusher rial they obtained down to their desired output size. They acquired material that exceeds the standards to be network for rainwater. In this context, where you need to bucket processed the larger rocks. The aggregates they excavate and produce a large amount of inert waste, the nec- obtained were reused immediately by laying them over the reused on the job site to create the road substrate that they drainage network trench, avoiding all logistical and material needed to reconstruct the bridge.  essary choice was MB Crusher’s equipment.

Page 60 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Power Meets Portability in McCloskey’s New I4C Compact Impact Crusher

HAND-FED EQUIPMENT/ SKID STEER ATTACHMENT DEALERS (Brush Chippers, Stump Grinders)

Stephenson Equipment, Inc. www.stephensonequipment.com Butler, PA 724-865-9221 Ebensburg, PA 814-886-5191 Harrisburg, PA (HQ) 800-325-6455 Wilkes-Barre, PA 866-667-6756

Robert H. Finke & Sons, Inc. www.finkeequipment.com 1569 US Route 9W Selkirk, NY 12158 518-767-9331

The 44-in. impact crusher has been designed with a deeper chamber, creating greater tramp release space. With an aggressive blow bar and apron design, four-bar variable speed rotor and three crush zones with an optional fourth strike, the I4C can be set up as a primary or secondary crusher in some of the toughest materials.

of Saratoga

Bobcat of Saratoga McCloskey International has unveiled the I4C, the latest entry into McCloskey’s impact crusher line. In a class of its own, it brings the power and productivity of an 44.3 in. (112.5 cm) impactor to a compact footprint for maximum maneuverability. Taking the original impact crusher design and transforming it into a heavy duty compact product that is even more flexible and productive, the new mobile crushers maximize the efficiency of any project site, according to the manufacturer. Built to the same high standards as full-size crushers, the new I4C delivers additional convenience and choice to suit every customer’s needs. McCloskey engineers have adapted the design to meet the evolving requirements of today’s projects and operations by developing more compact products while maintaining the same high standard of McCloskey durability, reliability and quality. The I4C compact impact crushers have a number of features that enhance their operation. The 44 in. impact crusher has been designed with a deeper chamber, creating greater tramp release space. With an aggressive blow bar and apron design, four-bar variable speed rotor and three crush zones with an optional fourth strike, the I4C can be set up as a primary or secondary crusher in some of the toughest materials. A new asymmetric feeder reduces bridging that can occur in some applications and, combined with the single unit feeder-hopper construction, delivers better motion and vibration for the material as it moves into the impact chamber. Maximum efficiency of material flow is delivered end-toend with the I4C — from the feeder to the new curved belt on the main conveyor that better manages material delivered to its 4m high stockpile. With quick release and ground level access, the conveyor belt also is easy to maintain and service. As with all McCloskey equipment, safety is paramount,

and the I4C is equipped with a number of features to ensure the workplace and the operator are secure. A chamber door safety sensor, built in safety shutdown functions, chamber safety arm and an innovative platform for changing blow bars all contribute to the safe operation and maintenance of the equipment. Simplicity is key, with ease-of-use and safety considerations built into the low voltage electrical system, hydraulics and control panel. Higher engine power delivers cost efficiency by delivering maximum production levels and is, size-for-size, McCloskey’s most powerful impact crusher, according to the manufacturer. “Listening to our customers is a core element of our design engineering across all product lines. We are bringing to the I4C to market to respond to the demand for a heavy duty, high production impact crusher with high mobility and enriched safety features. The I4C is an exciting entrant to the category, and we look forward to working with our global dealer network to fulfill the demand for these products,” said Toni Laaksonen, senior vice president, McCloskey International. For maintenance ease the vast majority of components are identical between models to simplify spare parts. Ground level access allows for quick service and maintenance, reducing the downtime for the operation. These compact, mobile crushers are suited particularly to construction and demolition recycling, asphalt recycling and aggregates. The new impactors deliver high performance and expanded versatility in a highly mobile lineup to customers around the world. With their fast set-up time and ability to nimbly move around in tight spaces, the crusher’s small footprint is uniquely suited to heavy duty applications where mobility and high production are key. For more information, visit www.mccloskey international.com. 

www.bobcatofsaratoga.com 1279 Route 9 Gansevoort, NY 12831 518-798-9283

Westchester Tractor, Inc. Westchester Tractor, Inc. www.wtractor.com

60 International Blvd Brewster, NY 10509 845-278-7766

EMPLOYEEE-OWNED EMPLOYEE-OWNED

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 61

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

LARGE EQUIPMENT DEALER THE BEAST 2460XP Trrack Horizontal Grinder

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Leslie Equipment Company www.lec1.com

MODEL BTC-300 M BT B Trrack Carri rie ier

6248 Webster Rd. Cowen, WV 26206 304-226-3299 Fax: 304-226-3067 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818

Norton, WV 304-636-6421 Ashland, KY 606-327-1709 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255

Fairmont, WV 304-534-5454

M MODEL 3590XL W Whole Trree Chipper pp

Stephenson Equipment, Inc. www.stephensonequipment.com Butler, PA 724-865-9221 Ebensburg, PA 814-886-5191

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

Harrisburg, PA (HQ) 800-325-6455 Philadelphia, PA 800-220-4033 Wilkes-Barre, PA 866-667-6756

Quality Fleet Service, Inc. 677500 Millbrook Rd. • Remus, MI M 49340 • 1-800-952-0178 FIN FIND ND US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

www.qualityfleetservice.com

MODEL SG-75 Trrack kS Stump pG Grinder i d

548 New Ludlow Road South Hadley, MA 01075 413-213-0632

Page 62 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Cat MH3250, MH3260 Material Handlers Set New Standard The new Cat MH3250 and MH3260 models deliver high efficiency in demanding material handling applications. Replacing the historical Cat 330D MH and 345 C MH models respectively, the Next Generation MH3250 and MH3260 tracked material handlers boast longer maintenance intervals and improved fuel efficiency to decrease owning and operating costs up to 20 percent. An entirely new cab concept elevates operator comfort throughout the shift to increase productivity. Both models feature new mechanical variable-gauge undercarriages that flexibly improve machine transportation without sacrificing lifting performance. Track gauge retracts to 10-ft. 7-in. to lower transport costs and make moving the material handlers more efficient. When at the yard, gauge extends to 12-ft. 2-in. wide to increase stability and maximize lift capacities. The MH3250 and MH3260 deliver impressive capacities Replacing the historical Cat 330D MH and 345 C MH models, respectively, the Next Generation MH3250 and MH3260 tracked material when working at their respective handlers boast longer maintenance intervals and improved fuel efficiency to decrease owning and operating costs up to 20 percent. 52-ft. 6-in. and 59-ft. 1-in. maxiWork in Comfort mum reach, reducing the number of times Featuring sound suppression for the material handler has to be repositioned at interior noise reduction and rubber the yard to increase productivity. cab mounts to reduce vibration feedback, the all-new Next Generation Raising the Bar On Performance cab advances operating ease, comThree different power modes — Power, fort and productivity. All controls are Smart and Eco — fine-tune power requireconveniently positioned in front of ments to the job, so the new MH3250 and and within easy reach of the operator MH3260 use less fuel than their predecesto avoid unnecessary movements. sors without sacrificing machine performThe left-hand console tilts up to offer ance. easy cab entry and exit. Maintaining Smart Mode automatically matches operator comfort throughout the engine and hydraulic power to working conentire shift in a variety of climates, ditions to reduce fuel consumption, while the premium air-suspension seat is Power Mode provides maximum power to heated and ventilated. optimize productivity. The machines’ new A large, 10-in. high-resolution fuel-efficient engines meet stringent U.S. touchscreen monitor with jog-dial EPA Tier IV Final emission standards and offers easy navigation of the intucan run up to B20 biodiesel. itive operator controls. Using the These material handlers operate at up to new Operator ID function, different 8,530-ft. above sea level without derating and offer standard high-ambient temperature The MH3250 and MH3260 deliver impressive capacities when working at their respective machine operators can store their capability of 125 F (52 C) and cold-start 52-ft. 6-in. and 59-ft. 1-in. maximum reach, reducing the number of times the material han- specific joystick and preferred dler has to be repositioned at the yard to increase productivity. power mode settings, and the capability of minus 25 F (minus 32 C). machine automatically recalls the New valve priority automatically places settings based on the ID. hydraulic pressure and flow where it’s warming in cold temperatures and helps pro- MH3250’s versatility, it can be equipped Improving highwall trailer required to increase material handling effi- long the life of system components, accord- with the ex-factory 25 kW generator for loading/unloading and shredder loading efficiency. Their advanced electrohydraulic sys- ing to the manufacturer. magnet operation. Customers can choose tem provides the optimum balance of power, A range of attachments and reach options from a range of Cat Work Tool attachments ciency, the hydraulically controlled cab rises efficiency and load control. Auto warm-up are available for varied applications to in different sizes to meet the site’s material to a maximum elevation of 19-ft. 9-in. see CATERPILLAR page 64 reduces the time it takes for hydraulic oil increase operating flexibility. Increasing the handling and production needs.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 63

2020 MCCLOSKEY 512R-T: Hours: 441, Horsepower: 74 hp, Serial Number: 91173, CAT 3.4L Engine. Hydraulic Tipping Grid Over Hopper>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2019 MCCLOSKEY ST80: Hours: 335, Serial Number: 90362, Self contained unit with hydraulic fold, raise/lower, and landing legs, and air brakes. Powered by a Kubota Tier 4 Diesel Engine, With Beltway Belt Scale >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY 621REG: Hours: 417, Serial Number: 91419, Fifth wheel kingpin connection with hydraulic landing gear. CAT Tier 4F C4.4 175HP. Hydraulic tipping grid over hopper - includes spill plate >>>Call

2020 MCCLOSKEY C3: Hours: 781, Horsepower: 510 hp, Serial Number: 91189, Brand new METSO designed cone, 300 HP Class. Volvo D13 Medium Cone Liner currently installed. Currently available >>>>>>>>>>>>>Call

2021 MCCLOSKEY R155: Hours: 15, Serial Number: 91711, Extended Tail Conveyor, Twin Drive on Tail, Remote Variable Speed Feeder. CAT Tier 4F 130HP Engine >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY R155: Hours: 30, Serial Number: 91421, Long hopper feeder. Remote stop/start feeder. CAT Tier 4F 130HP >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY S190 3D: Hours: 17, Horsepower: 130 hp, Serial Number: 91405, Tracked Triple Deck Heavy Duty Screener. CAT Tier 4F Engine. 15ft Feeding Hopper. Chevron Belt on Main Conveyor. Remote Machine Shut Off >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY J45: Hours: 112, Serial Number: 91695, Crusher with pre-screen. Volvo D11 Tier 4F 360HP Engine>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY J50V2 with Pre-Screen: Hours: 104, 2018 MCCLOSKEY 516RE: Hours: 1,700, Remote radial Brand New. Just Arrived. Serial Number: 91696, Volvo fines conveyor and tailings conveyor. 5’ diameter 16’ D11 Tier 4F 360HP Engine >>>>>>>>>>>>>>>>>>>>>>>>>>>>Call long drum >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>$175,000

2018 MCCLOSKEY C44: Hours: 913, Serial Number: 89103, Metal detector on feeder, twin oil coolers, wired/wireless track remote. Powered by a Tier 4 Volvo D13 Engine. Ready to Run >>>>>>>>>>>>>>$579,500

2018 MCCLOSKEY J45: Hours: 2,706, Serial Number: 88782, Heavy Duty Jaw Crusher, 45” x 27” jaw, Volvo D11 Diesel Engine. Hydraulic V-Belt driven jaws allow rotation forward and reverse. Rental Return>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>$419,500

MCCLOSKEY J50V2: Hours: 2,903, Serial Number: 89268, Returned from an extended rental period. Powered by a CAT 9.3 Diesel. Hydraulic V-Belt drive jaw allows jaw to move forward and reverse >>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>$495,850

2021 MCCLOSKEY ST100T-LA TRACKED STACKER: Hours: 246, Serial Number: 91551 Cat 3.4B T4F 74HP. Hopper Wear Plate, Impact Idlers Under Hopper, Upgraded Belt Cleaner/Scraper, Radial Lift Axle with Wireless Remote >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2021 MCCLOSKEY ST80TLA: Serial Number: 91715, Stacker with Hopper Wear Plates, Impact Idlers under Hopper, Radial Lift Axle with wireless remote, Upgraded Belt Cleaner/Scraper. CAT 3.4L Tier4 Final 74 HP >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2019 MCCLOSKEY R105: Hours: 285, Serial Number: 89823, Screen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

NEW ENGLAND’S EXCLUSIVE MCCLOSKY DEALER!!!

Page 64 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Material Handlers’ Cab Design Deliver Safer Operation

THE GEAR G TO CLEAR

CATERPILLAR from page 62

Safety in Mind Smaller cab pillars, combined with large tempered windows and a flat engine hood, deliver enhanced all-around visibility for the operator, increasing safety. With video feed displayed on the large touchscreen monitor, standard rearview and sideview cameras improve work area visibility. The cab design includes thick, impact-resistant safety laminated windshields that meet P5A standards, while operators are protected from falling and flying debris by the standard Falling Object Guard System (FOGS). An upper-level service platform with access steps constructed of antiskid punch plate provides easy, safe and quick access to machine service items. In the event of a hydraulic service interruption, the cab can be safely lowered via one of two emergency cab lowering valves, located inside the cab as well as outside of the machine. Check valves on the boom and stick prevent reverse hydraulic oil flow, to maintain the position of the front linkage should the hydraulic system experience an unexpected loss in pressure.

MANY MODE ELS, ENDLESS APPLICATIONS ATIONS High volume land cle earing operations know that when it co omes to creating the highest volume products p at th lowest the l t costt per tto on, P Peterson t horizontal grinders and chippers off ffer er bett better fracturing g, more accurate product sizing, and more m throughput than any machine on n the market.

Since 1981, Peterson’s P attention to detail and drive to build the highest quality, y, highest highe est vvolume producing machines hi maake k a Peterson P t a sure investment. Want to t see what w a Peterson can do?

Give us a call at 800.269.6520 8 or visit us at ww ww.petersoncorp.com

New England & New York www.barryequipmennt.com

Blower Trucks

•

Pennsylvania New England && West Virginia New York www.clevelandbrothers.co www.barryequipmen nt.comom

Chippers

•

Groff Tractor Pennsylvania New Virginia Jersey & West www.grofffftr tractor.comom www.clevelandbrothers.co

G Grinders

•

Screens Screens

Maryland, Delaware, NE Virginia, West Virginia www.albancat.com

•

Stacking tacking tack ki Conveyors C

Service Simplified Synchronized service intervals and extended filter replacement schedules reduce maintenance time and costs for the new Cat MH3250 and MH3260 material handlers. All fuel filters feature a coordinated 1,000-operating-hour change interval, and the new air intake filter with precleaner lasts up to 1,000 hours to reduce maintenance requirements. A new hydraulic oil filter improves filtration and increases change intervals to 3,000 operating hours, a 50 percent longer service life than previous filter designs. New antidrain valves keep the hydraulic oil clean during filter replacement to improve system longevity. Operators conveniently track filter life and maintenance intervals on the in-cab high-resolution monitor. Eliminating the need for operator interaction, the high-efficiency cooling fan features an automatic reverse function to keep the cores clean, maximizing machine uptime. Conveniently located Cat S·O·S ports allow for quick fluid sample extraction for analysis, simplifying maintenance. New remote services capabilities for the MH3250 and MH3260 increase service efficiency and potentially save trips to the job site. Remote Flash works around the production schedule to conveniently assure the machine operates with the most current version of on-board software, so it delivers high performance with minimum downtime. The Cat App conveniently helps to manage fleet location, hours and maintenance schedules and provides alerts for required maintenance needs. For more information, visit www.cat.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 65

• Dealer and manufacturer working together for your full satisfaction • Customized ordering process ensures cone matches application • Meeting and exceeding your individual production goals • Tailor ailor-made terms, conditions, warranties and service • Decades of application experience to help improve your crushing/screening circuits

• Enhanced countershaft rotationn • Fewer accumulators for less maintenance • Inverted tramp relief cylinders pprotected from dust • Chamber design accepts more feed • One-piece cast main frame witth carbon steel bowl • Inspection ports improve mainttenance • Recondition seating surface 3XX in the field • Replaceable seat liners • In-house automaation program

Page 66 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Dediicated tteam. Deedicateed equip D pment. With the entire Wirtgen Group and expeert support, youu won’t need annother dealer.

We understan nd your business and nd sense of urgency. Call today! Tom Rizzo, Wirtgen Product Tom oduct Sales Specialist c: 585-3303-2179 o: 585-334-3867 67 e: trizzo@monroetractor or.com E i Equipment, t rental, t l parts p t and d serpment, vice i aavvailable il ble ble parts att 6 locations landtisersvice Ylocations ork k SSt State – oughout monroetr tNew actto tor rork Equipment, rental, availableNew at 6York ionst throughout YYork State .com Equip v throughout ocations Yor.com o.com St – monroetractorr.com

Now Your Kleemann Dealer for Eastern New York State!

1569 US Route 9W • Selkirk, NY 12158 (518) 767-9331

www.finkeequipment.com

EVOLUTION OF INNOVATION Innovative details, safety of the operator, simple handling - with optimal performance values at the same time. This is what KLEEMANN crushing and screening plants represent. The technical know-how and detailed knowledge of the technology is transferred directly to production when working together as a team.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 67

ROCK SOLID SERVICEžWE CRUSH YOUR ROCKS

140 Nutmeg Road South South Windsor, CT 06074 51 Veterans Drive Loudon, NH 03307 LARGEST DEALER IN NEW ENGLAND

THE MOST MATERIAL HANDLING MACHINES IN NEW ENGLAND SCREENING CRUSHING CONES IMPACTORS CONVEYORS TROMMELS WASHING RECYCLING

SCREENING

I M PAC T O R S

TROMMELS

USED AND NEW MACHINERY RENTALS AND FINANCING AVAILABLE

CONVEYORS

CRUSHING

1-800-53 CRUSH

Over 100 Machines in Stock

CALL TODAY! 1-800-53-CRUSH

W W W. P O W E R S C R E E N - N E . C O M Family Owned and

Operated for over 20 years

Call for Parts Today

ROCK SOLID SERVICEžWE CRUSH YOUR ROCKS

Page 68 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Outotec Debuts New Identity Across Whole Offering To harmonize the visual identity of the existing offering with the Metso Outotec organizational brand and to create a strong, unified and easily identifiable look for the new era, Metso Outotec will update the industrial branding of its whole product and service portfolio. The new identity will clearly differentiate Metso Outotec’s offering by combining modern design with the powerful Metso Outotec brand colors and typography. Standalone brands in the aggregates business like McCloskey, Shaorui and Jonsson make an exception and will continue with the existing branding. High customer value, sustainability and safety features are among the key criteria behind Metso Outotec’s industrial design and product branding choices. Metso Outotec’s Planet Positive-thinking also will be visible on the products: the more than 100 products already identified to have sustainability features relating to water or energy efficiency, reduction of emissions, circularity or safety will have a Planet Positive label attached to them. Implementation of Product Branding in Phases The main color of the Metso Outotec products will be light grey, replacing the previous industrial product branding of both companies. A darker grey shade will be used as an accent color to bring contrast. The strong and recognizable black and orange brand colors and the Metso Outotec logo will always be visible on the products. Additionally, product names will be visible, marked with an orange stripe. The new color scheme will be applied in a phased manner throughout all Metso Outotec products, starting with the new product launches in 2021. “The development of our new industrial brand design derives from our desire to present a strong, harmonized and consistent image towards our customers throughout all touchpoints. With an updated and appealing identity, we can strengthen our image as a leader in our customer industries and the

The main color of the Metso Outotec products will be light grey, replacing the previous industrial product branding of both companies. A darker grey shade will be used as an accent color to bring contrast.

The Premier and Select horizontal grinding mills are designed for different customer segments and markets, and they have distinctly different features and benefits. In both lines, there are various mill solutions available for a wide range of applications.

Metso Outotec Launches Horizontal Grinding Mills Every mining operation has a unique grinding process that requires versatile grinding equipment. During the last six months, Metso Outotec has extensively reviewed the combined horizontal mill product offering from the legacy Metso and Outotec companies. As a result, it has unveiled the harmonized Metso Outotec horizontal mill product lines that represent the best of both legacy companies: Metso Outotec Premier horizontal grinding mills and Select horizontal grinding mills. “With the introduction of the Premier and Select horizontal grinding mills, Metso Outotec continues its over 100-year legacy in grinding. Both lines have their own differences and benefits, but share the concepts and expertise that have made us an industry leader time and time again,” said Christoph Hoetzel, head of grinding business line at Metso Outotec. “As a combined company we have consistently led the way in grinding mill innovation. We’ve continuously pushed mill technology in the next size increment. Currently, we have the largest operating mills in the world, and we want to lean on that legacy in enabler of sustainable modern life,” said taking the next steps in mill size. In addition, Helena Marjaranta, vice president of com- it is important for us to continue to be a frontrunner in the development of a more robust munications and brand at Metso Outotec. “We are particularly proud of our Planet suite of horizontal mill technologies, providPositive labeling, which we will implement ing desirable options for customers looking in our products hand in hand with the new for quick execution with reliable technolobranding. It is a strong proof of our commit- gy.” ment to sustainable business.” For more information, visit Two Lines With Different Features The Premier and Select horizontal grindwww.mogroup.com.  ing mills are designed for different customer

segments and markets, and they have distinctly different features and benefits. In both lines, there are various mill solutions available for a wide range of applications. The Premier horizontal grinding mills are completely customizable solutions built on modern grinding mill technology, process expertise and design capability. The Premier horizontal grinding mills are engineered to excel and create vast possibilities for customers and applications, according to the manufacturer. The Select horizontal grinding mills are a range of pre-engineered solutions that allow simple mill selection, simplified proposal preparation, and a streamlined order execution process. Select horizontal grinding mills feature a robust suite of technologies and conservative design parameters that meet or exceed operational goals. Select horizontal grinding mill sizes are available for applications up to 7.8 MW for both the SAG and Ball mills. Rod mills are available up to Ø4.60 m X 6.10 m EGL. Metso Outotec’s offering also includes modern reline equipment — the most recent launch being the high-capacity Mill Reline Machine (MRM) with a capacity of 4,000 kg — as well as a broad selection of liner options, including the Megaliner. Metso Outotec Services are available to provide horizontal mill inspections programs, full Life Cycle Services (LCS) contracts for planned shutdowns and maintenance, and a full range of spare and wear parts. For more information, visit www.mogroup.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 69

PRO OVEN UPTIME WITH UPTIME K KITS

PURP POSE-BUIILT

FROM THE T GROUND D UP

SENNEBOGEN, in keeping with their philosophy to maaximize uptime, uptime has created UPTIME Kits. W Whether you are a service technician in-house or on the road, these kits have everything you y need for every service, maintenance and PM task in one place. They were created to save you time and money. Managing hundreeds of related service parts, from belts and nuts to O-Rings and special tools becomes eassy with a single part number to order and stockk.

They are: • Easy to order an nd easy to stock Ţ 1BDLFE XJUI KPC C TQFDJŻD components an nd tools • Ideal for stockin ng service shops and trucks Choose from the following f kits: • Central lubricattion system kits • Preventive main ntenance service kits • O-Ring kits • Electrical servicce kits • Hydraulic servicce kits And the best thing is that these kits, in stock and ready to go, are custom-built to match your machine mo odel and series. Count on 4&//&#0(&/ UP NFFU ZPVS OFFET JO UIF ŻFME or in-house. For m more information on UPTIME Kits scan the QR code. Kits, code

See how SENNEBOGEN ENNEBOGEN can purpose-build the right maachine for you

www.seennebogen-na.com | +1-704--347-4910

ANDERSON EQUIPMENT CO.

TYLER EQUIPMENT CORP.

Pleasant Valley, WV 304-366-3075

Manchester, NH 603-627-7696

Henrietta, NY 585-334-6770

Watertown, NY 315-788-5512

Gorham, ME 207-591-5482

South Charleston, WV 304-756-2800

East Montpelier, VT 802-223-9689

Syracuse, NY 315-463-8673

Endicott, NY 607-748-3400

Bangor, ME 207-942-0177

Lancaster, NH 603-788-5591

Tonawanda, NY 717-877-1992

Latham, NY 518-785-4500

Allegany, NY 716-372-8822

www.andersonequip.com

East Longmeadow, MA 413-525-6351 Berlin, CT 860-356-0840

www.tylerequipment.com

Page 70 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Get the big picture Whether you are looking for portable track-mounted jaw crusherrs, s, cone crush hers or screenerrs, s, Whitney & Son in partnership with Metso Outotec has the products and experience you o are looking for. Since ĺłĿĽĘ Ō Ť ě Aggregate producers call Whitney & Son for products like the Metso Lokotrack® LT1 LT106™ jaw crusher and LT200HP™ cone crusher. The only track-mounted crusher on the market that is road legal. LT2 Contact Whitney & Son for the Me etso Outotec solution that is right for you, or learn more at metso.com/ /aggr aggregates.

mogroup.com

955 Kelley A 9 Avvenue Fitchburg, MA 04120 800--2245-547 47722 info@whitneyandsson.com

Whitney & Son is a Metso Outotec distributor serving all of New England. Lok o otrack® is a registered trade emark of Metso Outotec Corrporation.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 71

FAE PT LINE: GET USED TO BEST IN CLASS

fae-group.com

(770) 407-2014 - info@faeusa.com

EVO O 10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361

38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383

450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM

Page 72 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Mark Keenan 336-858-0186

North Carolina a • South Carolina Virginia • West Virginia

Special Inventory Sale

1-800-797-7276 • www.POWERSCREENMIDATL.com • Kernersville, N.C. • Leland N.C.

NEW, UNUSED, CEDARAPIDS PORTABLE PLANTS CRJ3750

BOTH UNUSED!

Including Run on Jacks, Extended Conveyor, Hydraulic Fold down Electrical Panel, Hydraulic legs under feeder/Hopper assembly

MUST SELL!!!

CRC380XHLS

Including Run on Jacks

HEAVILY DISCOUNTED CALL FOR BEST PRICE READY TO SHIP!

Call Mark Keenan 336-858-0186

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 73

W.I. Clark Company www.wiclark.com 17 Eagle Road Danbury, CT 06810 203-775-1203 • 866-675-2120 80 Pratt Road Plainfield, CT 06374 860-546-4808 30 Barnes Industrial Park Road Wallingford, CT 06492 203-265-6781

Company Wrench www.companywrench.com 2636 S Black Horse Pike Williamstown, NJ 08094 855-562-3526 • 856-404-9618

Highway Equipment Company www.highway-equipment.com

mhl 375 F -SERIES

STRONG. RELIABLE. E EFFICIENT.

4690 Route 219 DuBois, PA 15801 814-371-3600 • 877-888-4326 5846 West Road McKean, PA 16426 814-476-7755 • 866-476-7755 22035 Perry Highway Zelienople, PA 16063 724-452-7800 • 800-222-8798

Discover Morre Fuchs World- Class Material Handlers

C.N. Wood Co., Inc. www.cn-wood.com 200 Merrimac Street Woburn, MA 01801 781-935-1919 140 Wales Ave. Avon, MA 02322 508-584-8484 102 State Road Whately, MA 01093 413-665-7009 60 Shun Pike Johnston, RI 02919 401-942-9191 25a Bernhard Road New Haven, CT 06513 203-848-6735 84B Warren Ave Westbrook, ME 04092 207-854-0615

All Island Equipment www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631-643-2605

Page 74 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Compact Sennebogen 825 Deftly, Nimbly Works on Urban Demolition Projects The days are past when fleets of specialized cranes, excavators and loaders can converge on the demolition sites in busy cities. Safety and economics are driving a clear trend towards optimized equipment planning that allows contractors to streamline operations, minimize downtimes and reduce traffic interruptions, while making the best use of time with skilled operators. Densely populated inner cities can’t afford the space for machines to sit idle and safety standards can’t afford the hazards of jockeying machines around in cramped work zones. Simply, demolition contractors need machines that can do more, with less. One-Stop Solution With customers demanding maximum productivity in a compact package, Sennebogen mobile demolition solutions are emerging as a family of one-stop, onsite demolition machines that “do it all” in urban locations. These models, ranging in size from 17 to 30 tons, combine a small footprint and powerful tool handling with increased flexibility to adapt to multiple roles. At the upper end of this series is the 825 R-HD E-Series machine mounted on an expandable crawler undercarriage and able to reach up to 45 ft. (14 m) with a full range of interchangeable hydraulic attachments. Purpose-built for rough working environments, such as scrap yards and waste handling facilities, these machines are built to last in the most demanding demolition applications, according to the manufacturer. The boom of the 825 R-HD features a fully hydraulic quick-change coupler allowing the operator to switch easily to the best tool for the job at hand. Comfortably settled into Sennebogen’s Maxcab, a single operator can take on every step of the tear-down: targeted deconstruction and sorting of building components, crushing material with a concrete pulverizer, cutting and sizing with demolition shears, and finally loading recyclable material and waste into trucks or bins with a choice of buckets and grapples. Compact, Flexible, Easy to Transport Flexible mobility and transportability also are key factors in the profitabil-

JESCO Inc. New Jersey & New York 118 St. Nicholas Ave. • South Plainfield, NJ 08070 (908) 753-8080 1790 Route 38 • Lumberton, NJ 08048 (609) 267-2020 1275 Bloomfield Ave. • Fairfield, NJ 07004 (973) 227-2221 • (800) 321-8080 497 Fishkill Ave. • Beacon, NY 12508 (845) 831-1800 • (800) 724-0725 110 East Jefryn Blvd. • Deer Park, NY 11729 (844) 482-0910 www.jesco.us

MONROE TRACTOR The elevated cab on the 825 M allows the operator on a demolition site a clear view of the deconstruction process.

ity of a demolition machine. The 825 travels with a compact footprint that allows it to quickly self-load onto a flatbed and move on to the next job site. No transit preparation is required, so the machine is shipped with its counterweight and boom in place, ready to work. On arrival at the work zone, the 825 drives off the truck. Then, its crawler tracks can telescope out for a wider stance, providing a stable working platform on uneven and broken terrain. As work progresses, the machine maneuvers easily to each new position. Like all Sennebogen material handlers, the 825’s boom can safely handle its maximum load capacity through 360 degrees of rotation with a minimal tail swing. This allows operators to get to work quickly in any direction. Demolition operators are often extending the boom and attachments up to significant heights, so they appreciate Sennebogen’s optional tiltable cab. The tilting Maxcab can be adjusted to look upward by as much as 30 degrees, so the operator can sit comfortably in their seat and avoid fatigue through a long shift, according to the manufacturer. The Maxcab also can elevate smoothly up to an eye-level of 18 ft. (5.7 m) to provide an ideal view into trucks for loading quickly and safely. Safe, Efficient Cost-Savings While the stability and versatility of the 825 make demolition sites safer for everyone, the Sennebogen Maxcab provides additional safety features to protect operators.

Ground-to-cab railings and handholds are standard equipment, along with Sennebogen’s catwalk and sliding door entry. Bulletproof glass on the windshield and the skylight protects the operator. Demolition models also are available with extra protective steel grilles on the roof and front window. Generous window space affords a clear unobstructed view of the entire work area from the elevated cab, augmented by cameras mounted on the right side (boom side) and rear of the carriage, displayed on a monitor inside the cab. The monitor also is able to receive feeds from additional optional cameras, such as one mounted on the stick for a closeup view near the working attachment. Sennebogen’s package of energysaving "Green Efficiency" technologies allow its diesel-powered machines to operate with low emissions, low wear and tear and low fuel cost. EcoMode, automatic idle and automatic stop, reduce diesel consumption to a minimum and further reduce fuel consumption and emissions by up to 25 percent. Sennebogen is known for relying on hydraulic engineering, instead of “black box” electronics to achieve its goals for power and efficiency. Largescale valves and hoses allow the hydraulic system to keep oil flowing smoothly according to the demand for lifting or attachment tasks. This lowpressure circuit results in a reduction in wear on pressure-sensitive hydraulic components, according to the manufacturer. For more information, visit www.sennebogen-na.com. 

New York 1001 Lehigh Station Road • Henrietta, NY 14467 (585) 334-3867 • (866) 683-5338 5035 Genesee Street • Buffalo, NY 14225 (716) 681-7100 • (800) 834-9606 7300 Eastman Road • N. Syracuse, NY 13212 (315) 452-0000 • (800) 287-5286 8194 State Route 415 • Campbell, NY 14821 (607) 739-8741 • (800) 866-8912 6 Equipment Drive • Bingamton, NY 13904 (607) 754-6570 • (866) 321-4277 www.monroetractor.com

NORTRAX 98 Sheep Davis Road • Pembroke, NH 03275 (603) 225-2769 300 Clinton Street • Springfield, VT 05156 (802) 885-6840 www.nortrax.com

ROBERT H. FINKE AND SONS Western VT & Upstate NY 1569 US Route 9W Selkirk, NY 12158 (518) 767-9331 www.finkeequipment.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 75

A WIRTGEN GROUP COMPANY

T WO O POWERFUL PR RODUCTS. ONE GREAT RESULT. KLEEMANN CRUSHING AND SCREENING G PL ANTS

PERFORMANCE AND EFFICIENCY Y.. KLEEMANN crushing and screening plants can be optimally combined to create a quality end-produc t. An extensive selec tion of mobile jaw, impac t and cone crushers and screening plants, available as scalping and classif ying screens, open up the most diverse applications. With KLEEMANN plants, you’ll achieve the best results – in natural stone, recycling and mining. www.wirtgen e -group.com

WIRTGEN AMERIC A , INC . · 6030 Dana Way · Antioch, TN 37013 · Tel: (615) 501- 0600 · Fax: (615) 501- 0691

CENTRAL EQUIPMENT COMPANY Maine 45 Dempsey Graves Stillwater, ME 04489 (888) 927-8762 (207) 827-6193 www.centralequipmentco.com

ELLIOTT & FRANTZ, INC.

W. I. CLARK COMPANY

SCHMIDT EQUIPMENT INC.

DE, MD, VA & Southeast PA 450 East Church Road King of Prussia, PA 19406 (800) 220-3025 (610) 279-5200 www.elliottfrantz.com

Connecticut 30 Barnes Industrial Park Road S. Wallingford, CT 06492 (866) 675-2120 (203) 265-6781 www.wiclark.com

New England 80 Southbridge Road Rt. 20 North Oxford, MA 01537 (508) 987-8786 www.schmidtequipment.com

Page 76 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Powerscreen Responds to Decarbonization Challenge

Powerscreen, a leading provider of mobile crushing and screening equipment, is responding to the industry’s decarbonization challenge by providing solutions that work toward minimized environmental impact and greater sustainability. Powerscreen’s decarbonization story begins with the introduction of the concept of mobile crushing and screening, has evolved to increase fuel efficiency and looks to the future with Powerscreen’s electrification strategy, including an exciting, brandnew concept for the future of crushing and screening — the Eco-Warrior battery powered screener. Neil Robinson, Powerscreen product and applications manager said, “Some may view this topic as a recent trend, but for Powerscreen, decarbonization is multifaceted and has always been at our core. The Powerscreen mobile concept has always contributed towards decreasing the carbon footprint per ton of material produced. “This is done by reducing unnecessary material handling of hauling and loading material to static plants in aggregate production or in the ability to recycle and reuse material at point of use, for example in roadbuilding projects where sub-base material is produced in situ. Using stockpiling conveyors as part of a track mobile set-up is another perfect example of how-to cut-out unnecessary double handling, reducing fuel consumption and therefore carbon production.” Powerscreen has evolved its product range to reduce environmental impact by

making its crushing and screening equipment as fuel efficient as possible, using direct drive systems for its crushing range and improving engine capabilities and driveline design for its screening range. “Direct drive systems are proven to be 13 to 18 percent more fuel efficient when compared with hydrostatic, resulting in significantly less carbon emissions, while improvements to our screening range has reduced engine speeds from 2,200 rpm to 1,800 rpm, which not only means cleaner engines with less emissions, but also reduced fuel usage and therefore carbon produced,” said Robinson. “For example, a typical mid-size screener running at 1,000 hours per year, has a fuel usage reduction of approximately 450 litres, which equates to 1.2 tonnes less of carbon produced annually.” Another important tool for fuel efficiency is Powerscreen Pulse, in-depth machine telematics that helps customers see how and where their machines are being operated, understand fuel consumption and carry out fault-finding activities to ensure optimized performance. “Powerscreen was the first mobile crushing and screening manufacturer to offer indepth machine telematics with the launch of Powerscreen Pulse in 2013. In the early days, it generated a large volume of data, but now our system has been refined to deliver actionable information with customized reports and suggested actions for more fuelefficient operation,” Robinson said.

Electrification is currently a key focus of the Powerscreen decarbonization strategy. The Powerscreen Hybrid range, designed to give customers alternative energy options to operate their range of crushing, screening and conveying equipment, has been dramatically enhanced to include more fully electric crushers and screeners as well as models powered by innovative combinations of diesel and electricity. These options enable customers to choose which fuel to use, depending on cost, location and availability, and are of particular benefit to customers who operate in an area where electricity is more cost effective than diesel fuel, where diesel engine noise is unwanted or on sites where electricity is the preferred energy source. “Customers using Powerscreen Hybrid units powered off the grid have been able to reduce onsite carbon emissions by 57 percent per tonne of material produced. While our hybrid customers have traditionally been in environmentally conscious countries and states, where legislation or financial incentives are more focused on green energy, we are witnessing a significant uptake in nontraditional locations, as customers prepare to comply with increased government drives for carbon neutrality.” Powerscreen continues to spearhead the industry’s drive for decarbonization and a clear demonstration of this is a brand-new concept for the future of crushing and screening — the Eco-Warrior battery powered screener. Working closely with automo-

tive technology and using top of the range, hyper efficient drives and intelligent control systems, the Eco-Warrior battery powered screener has been designed to deliver on the powerful screening action that Powerscreen machines are famous for, while being a selfcharging, or plug-in, model that features a simple, quiet engine with no after-treatment requirements, according to the manufacturer. The required engine size has been cut in half compared with the diesel hydraulic unit and the battery pack can mean emission-free running or give a power boost. “To the best of our knowledge this is the first battery powered screener in the world and has been clocking up testing hours since it was built in 2019. It still delivers on the powerful screening action that Powerscreen machines are famous for and we are now exploring taking it from concept to mainstream. “This isn’t a publicity stunt; the drive for decarbonization is real, with the UK, and other governments ruling that carbon emissions have to be reduced by 80 percent by 2050. It’s critical that we dramatically reduce our carbon footprint and Powerscreen has many solutions available today in support of this. However, we’re not stopping there — we’re taking it to the next level, continuing to be the pioneers in adopting technology that supports the industry in meeting the requirements of government decarbonization laws — this is the future.” For more information, visit www. powerscreen.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 26, 2021 • Page 77

Con-Agg A Division of Cleveland Brothers

www.cbconagg.com

2009 State Rd • Camp Hill, PA 888-725-4903 • 717-561-3339 Ō Łŀł Ť Ę

11 Progress Dr ĽļĻĿ ěĘ Ę ļłľĹ Ę

ĽĽĺ ļĺľ Ę

ĺĽľ

ļĺĹľ Ļĺł Ę

ĺĿŁ Ę Ļłľľ Ę

ľĽ Ō ĺŁĹ İ ľı ĺľĹĹ Ŀ Ę Ę Ť Ę ľļĹĹ ļĹł Wilkes-Barre Twp. Blvd Ę ĝ Ę Ę ĽľĿľ Ę

www.foleyinc.com Łľľ ĿľĹ Ļłŀľ Piscataway, NJ Ę Ę ŀļĻĝŁŁľĝľľľľ ĿĹłĝľĿĺĝĹļĹŁ ĻĺľĝĿļłĝĽļĹĹ ľĺĹĻ ŀĻĹ Ę Bear, DE ĿĺĹĝĻĿĺĝĽŁŁŀ ļĹĻĝļĻŁĝĽĺļĺ

www.hopenn.com ĺĻĻ Ŀłł ŀŁļ Poughkeepsie, NY Bronx, NY Bloomingburg, NY ŀĺŁĝŁĿļĝļŁĹĹ ŁĽľĝŀļļĝĿĽĹĹ ŁĽľĝĽľĻĝĺĻĹĹ ĿĿĹ ĻĻľ Ę Ę ĿļĺĝŀľŁĝŀľĹĹ ŁĿĹĝĿĿĿĝŁĽĹĺ In CT • Scott Gilligan, 860-461-6534 In NY • Kevin Kretschmer, 646-315-2284

MILTON CAT www.miltoncat.com 100 Quarry Dr ĻĘ Ę Ę ľĹŁĝĿļĽĝļĽĹĹ ŁĹĻĝĽļĽĝĽĻĻŁ ŁĽ 30 Industrial Dr Ę Ę łŀŁĝĻŀĿĝĻĽĹĹ ĿĹļĝĿĿľĝĽľĹĹ ĺĽ ŀł Wareham Ind. Park Brewer, ME Ę ĻĹŀĝłŁłĝĺŁłĹ ľĹŁĝĻłĺĝĺĻĹĹ ĺĿ ĻĺľŁ Ť Ę ŶĺĹ ĻĹŀĝŁŁļĝłľŁĿ Ę

ĽĹĺĝłĽĿĝĿļľĹ

ĽĿĺĹ Batavia, NY ľŁľĝŁĺľĝĿĻĹĹ 55 Industrial Park Dr Binghamton, NY ĿĹŀĝŀŀĻĝĿľĹĹ ľĹĹ Ę ľĺŁĝŁŀŀĝŁĹĹĹ ĻłĽ Ę ļĺľĝĽŀĿĝłłŁĺ

www.whitneyandson.com 95 Kelley Ave • Fitchburg, MA 01420 800-245-5472 • 978-343-6353 info@whitneyandson.com

Good work deserves good tools The Lokotrack® ST2.3™ mobile screen The Lokotrack® ST2.3™ mobile screen provides dependable screening power and the best screening performance in its weight class. Wide screening area, aggressive stroke and large screening angle make ST2.3 ideal tool for screening multiple different materials like top-soil, crushed concrete and fine aggregates. With a partner like Lokotrack ST2.3 by your side, you’ll be able to say ”yes” to a lot more customers – and get the job done. Find your closest Metso Outotec or distributor sales contact at mogroup.com/lokotrack

Partner for positive change mogroup.com

Page 78 • May 26, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CRUSHING

MA ATERIAL TERIAL HANDLING

SCREENING G

TRACKS

ZZZ KRႇPDQHTXLS FRP

WASHING W ASHING & CLASSIFYING

ZZZ WUDFH\URDG FRP

ZZZ PXUU\VYLOOHPDFKLQHU\ FRP

ZZZ WKRPSVRQUROHF FRP

The complete source for equipment in the aggregate, construction and recycling industries. dustries. Offering industry-leading brands such as the Pioneer Jaw Crusher, Kodiak® Plus Cone Crusher, Su uperStacker® ® ® ® Extendable Stacker, ProSizer Mobile Screening e Plant, Combo Screen, Vari-Vibe a High-Frequenc cy Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, r Global Trrack and FastPack. k.

www.kpijci.com

Trucks & Trailers

SECTION

Pages 79-86

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Transportation Biz Brings 30-Year Expertise to Niche Service By Ruksana Hussain CEG CORRESPONDENT

When Brad Grafe, owner and president of Valley Transportation Service Inc., established the company in 1989, he observed a vital niche: providing transportation services to manufacturers and shippers countrywide. From his Grand Meadow, Minn.-based offices, his network of company-owned, lease-purchase and owner-operator trucks provides a much-needed solution to clients across the United States, moving primarily construction and agricultural equipment. From only two trucks, two drivers and two office staff, Valley has grown tremendously in the past three decades, with 60 staff at the main office location, 200 drivers and four outside sales crew and more than 200 trucks. Previously a fertilizer and chemical sales representative for an agricultural equipment cooperative, Grafe managed a trucking company for four years where he learned the business before venturing out on his own in 1989. The scope of services has remained the same at Valley. “The size of the equipment that we haul and the amount of stuff we can put on a trailer has drastically been reduced just because

From only two trucks, two drivers and two office staff, Valley has grown tremendously in the past three decades, with 60 staff at the main office location, 200 drivers, four outside sales crew and more than 200 trucks.

see VALLEY page 84

Valley Transportation Service Inc. provides a much-needed solution to clients across the United States, moving primarily construction and agricultural equipment.

Valley works with a team of owner operators and company drivers to support its expanding reach.

Page 80 • May 26, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Curry, Versatran Continue Partnership With 6T Retriever

Cleveland Brothers 4565 William Penn Highway Murrysville, PA 15668 866-551-4602

Milton CAT 100 Quarry Dr Milford, MA 01757 508-634-3400

Erie 3950 Depot Road Erie, PA 16510 814-898-3388

84 Concord St North Reading, MA 01864 978-276-2400 978-276-2410 Parts

Somerset 168 Industrial Park Road Somerset, PA 15501 814-445-7915

14 Kendrick Rd Wareham, MA 02571 508-291-1200

Clearfield 1307 S Second Street Clearfield, PA 16830 814-765-1611 Mansfield 18512 Route 6 Mansfield, PA 16933 570-662-7171 Lantz Corners 3105 Route 219 Kane, PA 16735 814-778-5250 Mount Pleasant 309 Foothills Lane Mt. Pleasant, PA 15666 724-696-4080 Turbotville 190 Cleveland Brothers Road Watsontown, PA 17777 570-538-2551

The 6T Retriever brings to the table all the features of its predecessors, the 15T and 20T Retrievers, but does not require drivers to possess CDL licenses.

As soon as Versatran launched its new 6T Retriever, its partner and one of the largest commercial truck manufacturers in the United States, Curry Supply, announced that the product would be included in its own offering as well. The 6T Retriever brings to the table all the features of its predecessors, the 15T and 20T Retrievers, but does not require drivers to possess CDL licenses. Curry Supply currently is taking pre-orders for the 6T from customers across the country. For customers across the nation looking to save time and money on hauling and delivery of equipment and materials and maintenance of vehicles, the Retriever line has been the all-in-one solution, according to the manufacturer. It has a high degree of flexibility and a nimble design that features an air-operated curved platform, a low center of gravity and shallow loading angle. These features translate directly into enhanced hauling capacity, rapid cycle times, swift deck and ramp deployment, and idle-free system

operation. All these benefits used to be reserved exclusively for customers with CDL licenses, but not anymore. With its hauling capacity of up to 12,000 lbs. of payload, the non-CDL 6T takes things to the next level, the manufacturer said. As Jeff Shaw, vice president of sales and marketing, of Curry Supply put it: “We are excited to announce that our offer of Versatran products has been upgraded to include its latest product, the non-CDL 6T. This expansion of the Retriever pack enables us to help a larger and more diverse base of clients achieve higher ROI while taking advantage of the latest developments in the industry, as epitomized by Versatran’s entire Retriever line. “We have excellent shipping capabilities and customers who order their Retriever from us now can expect delivery as early as late summer.” For more information, call 800/3452829, email sales@currysupply.com or visit www.currysupply.com. 

Lancaster 4326 Oregon Pike Ephrata, PA 17522 717-859-4905 State College 2955 Stewart Dr. State College, PA 16801 814-237-8338 Harrisburg 5210 Paxton Street Harrisburg, PA 17111 717-564-0598 Wilkes-Barre 970 Wilkes Barre Twp. Rd. Wilkes-Barre, PA 18702 570-822-8141 Clarksburg 6286 West Veterans Memorial Highway Bridgeport, WV 26330 304-842-2222 Shinnston 5541 Benedum Drive Shinnston, WV 26431 304-592-5855 www.clevelandbrothers.com

4610 E Saile Dr Batavia, NY 14020 585-815-6200 585-815-6250 Parts 500 Commerce Dr Clifton Park, NY 12065 518-877-8000 518-877-6860 Parts 55 Industrial Park Dr Binghamton, NY 13904 607-772-6500 607-251-6550 Parts 294 Ainsley Dr Syracuse, NY 13210 315-476-9981 315-703-7042 Parts 79 Robertson Blvd Brewer, ME 04412 207-989-1890 207-991-3130 Parts 16 Pleasant Hill Rd Scarborough, ME 04074 207-883-9586 207-885-8045 Parts 30 Industrial Dr Londonderry, NH 03053 603-665-4500 603-665-4510 Parts 150 Cat Lane Richmond, VT 05477 802-434-4228 802-434-7810 Parts 2158 Plainfield Pike Cranston, RI 02920 401-946-6350 www.miltoncat.com

Bobcat of North Jersey 201 Maltese Dr. Totowa, NJ 07512 973-774-9500 www.njbobcat.com

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2021 • Page 81

NO OT ALL T TRAILERS S ARE BU UILT THE E SAME SOM ME ARE STRO ONGER THAN N OTHERS

Our ttrrailers start out tough gh and stay tough so theyy can safelyy haul yyour equipment q p day after t day, year after year. Learn more: towmaster ster.com/more .

Hyd Dump D Drop-De eck

Tilt-Deck

AMER RICA A’S ’S BEST B BUIL LT T TRAILE TRAILERS ERS FOR R PROFESSIONAL HAULER RS

Hyd draulic Tail a

Lowboy

M MORE MODELS • MORE OPTIONS PTIONS • MORE CHOICES

Call 800-462 2-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH

Asphalt Care Equipment Inc. 2765 Galloway Rd. Bensalem, PA 19020 215-639-9800 www.asphaltcare.com

Douglas Equipment & Supply Co. 7100 Kreidler Rd. York, PA 17403 717-428-1517 www.douglasequip.com

Metro Bobcat, Inc. 8250 Beechcraft Ave. Gaithersburg, MD 20879 301-840-9300 33 West Old Liberty Rd. Eldersburg, MD 21784 410-795-1500

FOLEY Inc. 855 Centennial Avenue Piscataway, NJ 08854 732-885-5555

Bobcat of Connecticut, Inc. 54 Alna Lane E. Hartford, CT 06108 860-282-2648

650 S. Egg Harbor Road Hammonton, NJ 08037 609-561-0308

Bobcat of Stratford 821 Woodend Road Stratford, CT 06615 203-380-2300

2975 Galloway Road Bensalem, PA 19020 215-639-4300 5102 Beckmantown Road Whitehall, PA 18052 610-261-4887 720 Pulaski Highway Bear, DE 19701 302-328-4131 www.foleyinc.com

Bobcat of Greater Springfield 181 Wayside Ave. West Springfield, MA 01089 413-746-4647 www.bobcatct.com

Company Wrench 2636 S. Black Horse Pike Williamstown, NJ 08094 856-404-9618 www.companywrench.com

11000 Pulaski Hwy White Marsh, MD 21162 410-483-0600 7002 Marlboro Pike, Forestville, MD 20747 301-568-1104 www.metrobobcat.com

Monroe Tractor & Implement 1001 Lehigh Station Rd Henrietta, NY 14467 585-334-3867 6 Equipment Dr Binghamton, NY 13904 607-754-6570 5035 Genesee St Buffalo, NY 14225 716-681-7100 8194 State Route 415 Campbell, NY 14821 607-739-8741 423 Old Loudon Rd Latham, NY 12110 518-785-8013

Robert H. Finke & Son, Inc. 1569 Route 9W Selkirk, NY 12158 518-767-9331 www.finkeequipment.com

Ditch Witch Mid-States 3660 Interchange Road Columbus, OH 43204 614-443-9751 888-DITCHWITCH 9052 Marshall Road Cranberry Township, PA 16066 724-742-2844 888-DITCHWITCH www.ditchwitchmidstates.com

H.A. DeHart & Son 311 Crown Point Rd. Thorofare, NJ 08086 856-845-2800 www.hadehart.com

7300 Eastman Rd N Syracuse, NY 13212 315-452-0000 www.monroetractor.com A. Montano Company 571 NY 212 Suagerties, NY 12477 845-247-0206 www.amontanoco.com

Page 82 • May 26, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Pittsburgh, PA Lancaster, PA Hubbard, OH Cincinnati, OH

(412) 747-7777 (717) 569-4531 (330) 534-0082 (513) 874-4880

Daily RENTALS & Long-Term LEASING! (412) 747-7777

New & Used Trailer Sales • Rental / Leasing • Financing • Service • Parts

• 140 — 2015 Reitnouer 48'x102" Maxmiser Flatbeds $25,950 (In Stock) MECHANICAL DETACHABLES Unit # 4644

Qty 4 - New Eager Beaver Pavers, 35 GSL-PT Hydraulic Detachable Lowboys, 35-Ton, 24’ Deck, Air Ride.

Unit # 4641

Qty 1 - New 35 GSL-BR, 35-Ton, 24’ Deck, Beaver Tail.

2016 XL Specialized 35-Ton, 29’ in Well. 2012 Trail King 35-Ton, 29’ in Well. (Pictured)

*XL SPECIALIZED MINI-DECKS* Qty 4 – New 53’x102” 40-Ton Minideck, Hydraulic Classic Neck, 33’7” Clear Deck, 12” Loaded Deck Height, Accepts Both Flip Box and Flip Axle, Both Narrow Neck (Pictured) and Full Width Necks Available. ALL Tri-State Locations

FONTAINE DOUBLE DROP EXTENDABLES

Spec’s/ Features: • • • • •

2014 Fontaine LXTN-Extendable 29’-50’ in Well, 2014 Fontaine Flip Axle. Unit #’s 4451 & 4452

Qty 2 – New Fontaine LXT-40, 53’-74’x102”, 34’ Well - Closed, 60’ Well - Open, 40-Ton, Mechanical Detach. (Pictured)

ONLY

9,300lb +/-

48’x102” Front Axle Lift Aluminum Wheels LP22.5 Tires Winch Track on Both Sides of the Trailer • +HQGULFNVRQ 7LUH ,QÀ DWLRQ System

Qty 2 – New 53’x102” 25-Ton LOW CAMBER Minidecks, Hydraulic Classic Neck with Full Width Top Deck, 33’7” Clear Deck, 12” Loaded Deck Height, Pony Motor, Accepts Flip Axle.

MATCHED GROUP

Qty 14 - 2018 & 2019 Fontaine 48’x102” Steel Flats, Spring Slider, Winch Track. Unit #’s 4625-4638

Qty 1 – New Fontaine LXTN-40, 50’-71’x102”, 29’ Well - Closed, 50’ Well - Open, 40-Ton, Hydraulic Detach. Qty 1 – New Fontaine 55MXT, 55’-76’x102”, 29’ Well – Closed, 50’ Well - Open, 55-Ton, Hydraulic Detach. Qty 1 – New XL Specialized 45-Ton, Single Drop Stretch, 30” Deck Height, Deck 42’ Closed/65’4” Open.

2018 Fontaine Magnitude 55L Plus, 26’ in the Well, 18” Deck Height. Unit # 4234 2013 Entyre 55-Ton Paver, 24’ in the Well. (Not Pictured) Unit # 4536 2019 Manac Extendable 48’-80’x102”. Unit # 4411

2013 Sunbelt Pole Trailer, 48’/65’x102”, S/R. Unit# 4031

ip s Fl oxe e v B Ha Flip e W s& le Ax

2014 Talbert 51-Ton, 25’ in Well. (Not Pictured)

Unit # 4502

2017 Talbert 55-Ton, 25’6” in Well. (Not Pictured)

Unit # 4609

2012 Trail King 55-Ton, 26’ in Well w/2020 Trail King Flip Axle. (Not Pictured) Unit #’s 4605 & 4606

55-Ton 15” Deck Height Qty 8 – New XL Specialized 55-Ton Hydraulic Detachable Lowboys, 15” Deck Height, 26’ Deck, Rear Lift Axle, Available w/Both Standard and Hydraulic Flip Axles. Red, Black and Galvanized in Stock.

NEW MANAC S-T-R-E-T-C-H FLATBEDS

Qty 6 – New Fontaine Workhorse 55LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Rear Lift Axle, Some w/ Wheel Covers. Qty 1 – New Fontaine Magnitude 55-Ton Drop Side Rail, Rear Lift Axle, o/s Alum Wheels. Qty 1 – New Fontaine Magnitude 60LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Front Ramps, Rear Lift Axle.

Qty 1 – New Fontaine EQI Hydraulic Spreader. Qty 1 – New Fontaine Magnitude 60-Ton Beam Trailer, 28’ Beam, Modular Connection at Rear. Qty 1 – New Fontaine 55-Ton Paver, 24’ Well.

EAGER BEAVER TAGS Qty 6 – New 20XPT, 20-Ton, 21’ Flat Deck, Air Brakes with Spring Ramps (Qty 2 – with Hydraulic Ramps). Qty 1 – New 25XPL, 25-Ton with Hydraulic Ramps.

Qty 7 - 48’-80’x102”, Air Slider & Spring Slider. All with Winch Track and Galvanized Winches.

We Rent & Lease all types of Hydraulic Detachable’s, Drop-decks, Flatbeds, Sliding Axles, Extendable (flatbeds & double drops) Dry Freight Vans and more!

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2021 • Page 83

Lowboys That Load Front & Rear... The Ultimate In Versatility!

%H SUHSDUHG IRU DQ\ ORDGLQJ VLWXDWLRQ ZLWK RXU GSL/BR VHULHV RI ORZER\V

35 GSL/BR

&$3$&,7< OEV

35 Ton Detachable Gooseneck Wetline, Dual Axle Single Point Suspension, W/Beavertail and Ramp (Optional Air Ride)

50 GSL/BR

&$3$&,7< OEV

50 Ton Detachable Gooseneck, Three Axle Air Ride, W/Beavertail and Ramp

Lowest Loading Angle Available!

35 GSL/PT &$3$&,7< OEV

35 Ton Detachable Gooseneck Wetline, Dual Axle Air Ride Suspension, with 4' Rear Riser, Wheel Covers,Taper Beam Design

50 GSL/PT Lowest Loading Angle Available

&$3$&,7< OEV

50 Ton Detachable Gooseneck Wetline, Tri Axle Air Ride Suspension, with 4' Rear Riser, Wheel Covers, Taper Beam Design

ANNIVERSARY Visit our web site at EagerBeaverTrailers.com and you're a "click" away from getting all the information you need from our nearest dealer, or call 1-800-257-8163

1946-2016 >> EagerBeaverTrailers.com

Page 84 • May 26, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Valley Transportation Continues Its Significant Growth years. Our drivers are out typically three weeks at a time, so it gets difof the size of the equipment,” said ficult to find that type of person that Grafe. “We do a great deal of backwants to be away for long.” haul stuff, such as large air condiTo address the workforce chaltioner and refrigeration units, used lenge, aside from competitive pay farm and agricultural equipment, and bonus, Valley rewards “Driver auction items … anything that will of the Month” and “Driver of the go on a lowboy or specialized trailYear” recognition and the business er, we’ll sure try to tackle it and has created a new drivers’ lounge in move it for you.” the new shop providing breakfast A big change he has witnessed in and lunch. It also has a bunk house the industry in that time is equipoutside of town built for drivers so ment store mergers. they get their own hotel room they “We went from equipment dealcan stay in when their trucks are in ers that were hauling to one locathe shop. tion that now have 40 locations, so Valley also has stayed ahead of a lot of our growth was in just keepthe curve with computer and teching up with the customers and the Valley Transportation Service Inc. was founded to provide transportation services to manufacturers nology upgrades, including using demand they had from buying and shippers countrywide. PeopleNet fleet management softstores. We kept gaining more and ware in its semi-tractors to track more accounts that helped spur our growth.” the business outside the realm of a regular earned by the company in recent years where vehicles are any time of day. Grafe Valley typically works with Peterbilt and trucking company. This includes crane load, proves the value placed on safety for staff said he is considering forward-facing and Kenworth trucks, XL Specialized, Manac drive-on and drive-off loading, etc. While working at Valley. Online training is provid- side-view facing cameras to capture acciand Trail King Industries trailers, hauling Valley has fared well on the equipment front, ed to all drivers, with instructional videos dents as well, as he anticipates steady growth equipment across most of the Midwest, “We are running into some problems right and hands-on driver testing. A weekly driv- in the future. now with COVID-19 and the issues of being ers’ meeting is held where all the drivers Arizona, California, Texas and Florida. “We try to add 10 to 15 trucks a year right Located in a smaller building in down- able to get trucks finished and delivered to present that day meet with the safety team to now, so we try to get that growth scheduled review different topics and address the ever- and along with that comes the challenges of town Grand Meadow until 2006, Grafe us,” said Grafe. “We buy new trucks every year on a trade changing regulations in the industry. moved Valley to its current location on a 16the driver issue, so we are trying to battle that Valley works with a team of owner oper- and keep our growth up, too.” acre space, with an additional 40 acres cycle and some of them are getting a little attached, offering plenty of expansion room tougher to get. One of the bigger challenges ators and company drivers to support its Business is finally picking up this year for future growth. Where the company start- is all the emissions on the engines over the expanding reach. Approximately 130 trucks after a terrible second quarter last year, said ed out at 6,000 sq. ft., Grafe added another years. It started in 2008 and 2009 when the are company-owned and operated by com- Grafe. 6,000 onto it in 2013 and supplemented that emissions portion first came out. We had a pany drivers. Another 45 are leased, where “Our mission statement is ‘Our Goal is to with a new shop this past winter, which is a lot of trouble with engines, so just getting the Valley offers a lease-purchase program for Help You Reach Yours,’ so we are here to full-service center, “where we do everything problems worked out and keeping the the drivers so they can buy the trucks from make sure that the customer is taken care of from engine overhauls to brake jobs and oil motors running over the years has been chal- the company. and they get their customer taken care of … “The workforce is the biggest challenge we push that pretty hard with our staff and changes on all of our equipment,” said lenging.” Alongside, working with drivers means that we face every day, not so much with the we try to make it smooth and easy for the Grafe. Among specialized services offered at safety is a top priority at Valley and the safe- office and shop staff, but the driver situation customer because we know they’ve got one Valley are large equipment — up to 20 ft. ty director ensures everyone is well-trained that has always been a problem,” said Grafe. on the other end that they are trying to satiswide, 16 ft. tall and 200,000 lbs. — placing on that front. A string of safety awards “But today it seems worse than the prior fy.”  CEG VALLEY from page 79

Among specialized services offered at Valley are large equipment — up to 20-ft. wide, 16-ft. tall and 200,000 lbs. — placing the business outside the realm of a regular trucking company. This includes crane load, drive-on and drive-off loading, etc.

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • May 26, 2021 • Page 85

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

-; 37 +YPSS :LYPLZ VKRZQ ZLWK RSWLRQDO RQH SLHFH EROW RQ WULSOH UHHO UDFN DVVHPEO\

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

Chappell Tractor

Stephenson Equipment, Inc.

Tracey Road Equipment

Vermeer All Roads

www.chappelltractor.com

www.stephensonequipment.com

www.traceyroad.com

www.vermeerallroads.com

454 Route 13 South Milford, NH 03055 800-698-2640

Trailer Sales Contact John Connor 302-521-2601

6803 Manlius Center Road East Syracuse, NY 13057 315-437-1471 • 800-872-2390

251 Route 125 Brentwood, NH 03833 800-616-5666

135 Lincoln Avenue Prospect Park, PA 800-220-4033 • 610-534-0700

1523 Route 11 North Kirkwood, NY 13795 607-775-5010 • 800-370-9488

391 Loudon Rd. Concord, NH 03301 800-358-6007

Harrisburg, PA Pittsburgh, PA Butler, PA Ebensburg, PA Wilkes-Barre, PA Albany, NY

300 Middle Road. Henrietta, NY 14467 585-334-5120 • 866-950-6210

19598 Cady Road (Exit 44 - Watertown Center - off I-81) Adams Center, NY 13606 315-788-0200 • 888-335-0200

8830 Corridor Rd. Annapolis Junction, MD 20701 301-498-5200 • 800-492-1274

115 Railroad Ave. Ext. Albany, NY 12205-0306 518-438-1100 • 866-740-8853

Ashland, VA 800-552-2074

9598 River Road Marcy, NY 13403 315-765-8746 • 800-872-2390

Manassas, VA 877-661-6566

Page 86 • May 26, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

SECTION

Attachments Pages 87-94

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Getting Connected to Ride-On Trencher Attachments By Brant Kukuk SPECIAL TO CEG

Ride-on trenchers are one of the most efficient pieces of equipment for underground construction projects. From digging a trench for utility installation to a variety of landscape, hardscape and construction-grade tasks, ride-on machines are the easiest and most affordable solution to help underground construction professionals get the job done. And, with a growing number of available attachments, operators can turn one machine into many and get even more ROI from their trencher. Here are some of the attachments that can increase uptime and help operators quickly move from one project to the next. Standard Trencher The standard trencher attachment is a staple for any ride-on trencher machine. It generally comes pre-installed on a ride-on trencher. The standard trencher attachment will dig approximately 4 to 5 ft. into the ground and create a trench 6 to 12 in. wide, although different manufacturers will offer varying size options. With standard trencher attachments, contractors can efficiently create trenches to install irrigation lines, fiber or cable. The most popular trencher attachments will come equipped with a combination chain that is fitted with both shark tooth and cup tooth chains to cut through a variety of soil conditions. When using a standard trencher attachment, it’s important to always let the trencher work at its own pace. Forcing a trencher to cut faster can lead to broken chains and downtime for repairs. It’s also advised to inspect a chain at the start of every job to ensure that the chain has the proper tension. A good rule of thumb for determining this is to follow the two-finger rule — when inspecting chain tension, two fingers should fit between the chain and the lowest part of the boom when the boom is parallel to the ground. Contractors also should check to ensure there are no broken teeth on the trencher attachment. Both poor chain tension and

With a growing number of available attachments, operators can turn one machine into many and get even more ROI from their trencher.

broken teeth can reduce the effectiveness of the attachment. Backhoe Unlike most other ride-on trencher attachments, a trencher-backhoe attachment is most often stationed at the front of a machine so that it can operate in conjunction with another attachment. The primary function of a backhoe attachment is to start and finish a trench — similar to an entry-pit and an exit pit in HDD. A backhoe attachment is beneficial especially on job sites in which the start and end of a trench are in close proximity to urban hazards like fencing or existing landscape structures. A backhoe attachment also is used in rehabilitation and repair projects because it allows for more precise digging than a standard trencher attachment. The typical backhoe attachment starts with a 6-ft. digging depth and has a bucket width of 12 in. As machine size increases so too does backhoe size.

Saw A saw attachment — also known as a rock saw — is a circular blade that is similar in appearance to a microtrencher. This attachment is used to cut through difficult and rocky terrain. The most common saw attachments will dig down to a depth of 16 to 48 in. and typically use a conical bit blade with carbide. As a result, it’s important to consistently check the blade for wear. As saws are constantly used in rocky conditions, their bits will wear down faster than standard trencher teeth. Microtrencher Microtrenching is paving the way as a cost-effective solution that can help operators cut time, minimize disruptions and increase their overall ROI. Most commonly used for fiber installation, microtrenching attachments allow for a narrower trench to be created than with a standard trenching attachment. For

instance, a microtrencher will cut a trench ½ to 3 in. wide. This narrower trench saves contractors backfilling time and cost since less backfill will be needed. Microtrenching is typically done in the gutter pan that parallels the road where the asphalt meets concrete of the curb. By cutting a narrower trench when cross cutting and trenching on the side of the road, contractors don’t need to stop traffic, saving on traffic redirection headaches and associated costs. There are two typical blades that most microtrenching attachments will use. The first is a conical style bit that rotates in a holder and functions like a traditional rock saw. The second is a PDC blade, which is composed of diamond with carbide. The conical bits are generally the more affordable option between the two, but diamond PDC blades are growing in popularity due to its cleaner cut and longer lifespan. While a conical bit will be effective through around 4,000 ft. — meaning that contractors will likely need to replace bits daily — a diamond PDC blade will last around 20,0000 ft. before it needs to be replaced. Vibratory Plow A plow attachment is most commonly used to bury flexible pipe, conduit and cable. The plow is an attractive option in these applications as it offers the ability to install the application as the machine drives. Plows also create less ground disturbance than a standard trencher because they do not create an open trench. However, plows may be difficult to operate in hard or rocky ground conditions. There are two different styles of plow blades: a pull blade and a feed blade. A pull blade does what its name implies and will pull a cable, conduit or fiber behind the blade to install it underground. A feed blade will have a feeding chute on the attachment to allow conduit to be fed down through the attachment and into the ground. see TRENCHERS page 94

Page 88 • May 26, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engineered eered and y that prov p vides safer afer and feature the Ultralo ok® tooth system easier tooth repla acement. Combined with premium m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

Ultra alok® Tooth o System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades es s™ Cutting Edgess and Accessories essories

ANDERSON EQUIPMENT COMPANY C.N. WOOD CO., INC.

JORDAN EQUIPMENT CO.

200 Merrimac Street Woburn, MA 01801

18 Blackstrap Road Falmouth, ME 04105

1000 Washington Pike Bridgeville, PA 15017

2007 Ruskin Drive Pleasant Valley, WV 26554

912 Albany Shaker Road Latham, NY 12210

18 Gorham Industrial Pkwy Gorham, ME 04038

412/343-2300

302/366-3075

518/785-4500

207/591-5482

7550 Clearfield Curwensville Hwy Clearfield, PA 16830

2140 Military Road Tonawanda, NY 14150

22607 Murrock Circle Watertown, NY 13601

142 Target Industrial Circle Bangor, ME 04401

Whately, MA

814/765-5311

717/877-1992

315/788-5512

207/942-0177

413/665-7009

20561 Paint Blvd. Shippenville, PA 16254

115 Middle Road Henrietta, NY 14467

720 E Franklin Street Endicott, NY 13760

1645 Candia Road Manchester, NH 03109

401/942-9191

814/226-4100

585/334-6770

607/748-3400

603/627-7696

436 Riggs Road Somerset, PA 15501

6317 Thompson Road Syracuse, NY 13206

4176 Route 417 Allegany, NY 14706

151 Packard Road East Montpelier, VT 05651

508/584-8484

315/463-8673

716/372-8822

802/223-9689

www.cn-wood.com

781/935-1919

814/443-2867

207/797-2240 35 Daves Way Hermon, ME 04401

207/848-9036 Johnston, RI Avon, MA

744 Clough Mill Road Pembroke, NH 03275

603/228-3377

www.jordanequipment.com

www.andersonequip.com www.esco.weir

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 26, 2021 • Page 89

www.eaglepowerandequipment.com 953 Bethlehem Pike Montgomeryville, PA 18936 215/699-5871 2211 N. Dupont Highway New Castle, DE 19720 302/652-3028 1416 Phoenixville Pike Suite 200 West Chester, PA 19380 610/458-7054

Maximize your ROI www.contractorssales.com 121 Karner Road Albany, NY 12212-2010 518/456-1445 1283 Dolsontown Road Middletown, NY 10940 845/956-0222

To get your best possible return on investment, highest productivity and longest equipment life, it’s important to use the right carrier with the right tool. www.highway-equipment.com 22035 Perry Highway Zelienople, PA 16063 724/452-7800 5846 West Road McKean, PA 16426 814/476-7755 4690 Route 219 Dubois, PA 15801 814/371-3600

www.tylerequipment.com 251 Shaker Rd. East Longmeadow, MA 01028 800/292-6351 1980 Berlin Turnpike Berlin, CT 06037 800/352-4473

www.traceyroad.com 6803 Manlius Center Road East Syracuse, NY 13057 800/872-2390 1523 Route 11 North Kirkwood, NY 13795 800/370-9488 19598 Cady Road Exit 44-Watertown Center off Adams Center, NY 13606 888/335-0200 9598 River Road Marcy, NY 13403 800/872-2390

Before you buy or rent, rely on people you can trust. Allied Construction Products, with 78 years of experience, can guide you to the right hydraulic breakers – including our new Excellence and Performance Series models – and the right Ho-Pac® and Skid-Pac® compactor drivers. Because nobody delivers the right power, or the right features, like Allied.

Scott Scholz

Jeff Sharp

Rich Steinbrenner

ALLIEDCP.COM | 800-321-1046

THERE’s NO SUBSTITUTE FOR EXPERIENCE

Page 90 • May 26, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

FIXED MOUNT MG SUPERGRIP GRAPPLES For use with XR Rotators and Tiltrotator applications. – 6 to 25 tonne Excavators

HULTDINS.COM | 519-754-0044

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 26, 2021 • Page 91

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

TRACEY ROAD EQUIPMENT COMPANY WRENCH

www.traceyroad.com 6803 Manlius Center Road East Syracuse, NY 13057 315-437-1471 800-872-2390

Albany, NY 518-438-1100 866-740-8853

Queensbury, NY 518-793-9688 833-817-2917

Utica, NY 315-765-8746 800-872-2390

Kirkwood, NY 607-775-5010 800-370-9488

Henrietta, NY 585-334-5120 866-950-6210

Adams Center, NY 315-788-0200 888-335-0200

www.companywrench.com 2636 S Black Horse Pike Williamstown, NJ 08094 856-404-9618 855-562-3526

Page 92 • May 26, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

Wheel Loaders Ad Closing Date Publishing Date

ISSUE

Backhoes Ad Closing Date Publishing Date

ISSUE

August 19, 2021 September 1, 2021

20 Off-Road Trucks Ad Closing Date Publishing Date

ISSUE

July 22, 2021 August 4, 2021

Utility Equipment Ad Closing Date Publishing Date

ISSUE

June 24, 2021 July 7, 2021

September 16, 2021 September 29, 2021

22 Crawler Loaders, Dozers Ad Closing Date Publishing Date

October 14, 2021 October 27, 2021

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 26, 2021 • Page 93

Visit our website for more attachments!

www.nationalattachments.com

We have an Extensive Used Inventory!

Page 94 • May 26, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Komatsu Introduces Range of New Hydraulic Breakers reduce vibration to the excavator, adding to operator comfort. The simple design of the JTHB-G hydraulic breakers translates to reduced maintenance and fewer parts to buy, to help lower equipment-running costs. A one-year warranty comes with all G-series breakers and also applies to breakers used for mining and quarry applications.

Breakers are a flexible and crucial attachment used for a wide variety of jobs, including tunneling, trenching, foundation removal, dredging, bridge demolition, quarry excavation, mining and more. To meet growing demand in North America, Komatsu is expanding its product line of hydraulic breakers. Designed and tested for compatibility with Komatsu excavators from the PC78 up to the PC490, the high-percussion efficiency and unique variable energy technology of these breakers are built to provide high production in multiple applications, according to the manufacturer. To protect the breaker, carrier and operator, Komatsu built in several features and benefits. The breakers have an accumulator that eliminates hydraulic pump cavitation to prevent flow surges back to the carrier hydraulic tank. By recycling high-pressure oil internally, this allows more energy with a lower flow, to reduce hydraulic pressure spikes and protect the carrier’s hydraulic system. JTHB-G Line of Breakers Easy to maintain with only two moving parts, the JTHB-G line utilizes a hybrid design of hydraulic flow and pressure along with a nitrogen-filled chamber that provides striking energy. The tie-rod design is engineered for durability in tough rock and concrete applications. Adding to longevity and durability, blank firing protection is standard and includes a hydraulic cushion at the base of the cylinder, to reduce metal-to-metal contact. Larger models feature special key slot dampers that help

The breakers have an accumulator that eliminates hydraulic pump cavitation to prevent flow surges back to the carrier hydraulic tank. By recycling high-pressure oil internally, this allows more energy with a lower flow, to reduce hydraulic pressure spikes and protect the carrier's hydraulic system.

JMHB-H Line of Breakers Compact yet powerful, the JMHB-H attachments are accumulator-type hydraulic breakers for a variety of rock and concrete demolition applications. Unlike gas-fired breakers, the JMHB-H series does not require a nitrogen recharge. It is equipped with blank firing protection to help prevent piston movement via a hydraulic brake. For consistent impact power in a variety of environments, sound dampening housings help assure compliance with noise ordinances, even in urban applications.The breaker protects itself with a pressure regulator valve to prevent overflow, and its dampening system helps prevent damage to excavator booms and housing cracks. To enable the use of more powerful breakers on smaller excavators, a single powercell eliminates heavy tie rods to provide a better weight-to-power ratio on compact models, while the mounted automatic lubrication feature helps protect against dust and debris. Similar to the G-series, all H-series breakers come with a one-year warranty. For more information, visit komatsuamerica.com. 

Ride-On Trencher Attachments Help Increase Uptime TRENCHERS from page 87

Safety Best Practices As with any machine or attachment, it’s always important to read the operator’s manual before boots hit the ground. Remember that anytime crews are digging into the ground, they should always call 811 to get a job site located. Understanding where existing utilities are located is one of the most important steps in mitigating damage and reducing the chance of costly strikes. Additionally, it’s important to take precautions when installing attachments. While attachments are built to have the ability to be changed out, we always recommended that users contact a local equipment dealer when looking to remove or install attachments. Personnel at a dealership have been trained and have access to the proper equipment to ensure a safe attachment exchange. Trenching for Efficiency Ride-on trenchers are consistently one of the most popular machines in underground construction. Now, with the growing number of attachments available, operators can customize their machine to meet almost any job site need, maximizing uptime, improving job performance and increasing ROI. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 95

DELIVERIING PERF ORM MANCE AND VERSSATILITY T Reliability, value and indusstry-leading performance are yo ours with our comple ete portfolio of mobile m telescopiic cranes. Grove products are available in n:

> All-terrain m models with capacitie es from 50 t (55 USt) tto 450 t (550 USt) > Rough-terraain models with capacities from 30 t (30 USt) to 150 t (165 USt) > Truck-moun nted models with capacities from 36.3 t (40 40 USt) to 100 t (115 USt) > Telescoping cra crawler models with capacities from 30 t (30 USt) to 127 t (140 USt) > Industrial models m with capacities from 8.1 t (9 USt) to o 22 t (25 USt)

www.m manitowoc.com

www.hoffmanequip.com

300 South Randolphville Rd. at Route 287 Piscataway, NJ 08854 800-446-3362 22 Peconic Ave. Medford, NY 11763 631-207-2900 1144 Zerega Ave Bronx, NY 10462 718-822-1180

www.shawmutequipment.com

1330 Hurffville Rd. Deptford, NJ 08096 856-227-6400

20 Tolland Turnpike Manchester, CT 06042 800-829-4161

1440 Route 9W Marlboro, NY 12542 845-236-3000

136 Eastman St. South Easton, MA 02375 877-526-9213

120 Gordon Drive Lionville, PA 19341 610-363-9200

Shawmut Equipment of Canada, Inc. 318 Park Road Elmsdale, NS B2S 0G2 902-883-7450

www.stephensonequipment.com

Philadelphia, PA 800-220-4033

Pittsburgh, PA 800-692-7600

Harrisburg, PA 800-325-6455

Syracuse, NY 800-368-6455

Wilkes-Barre, PA 866-667-6756

Albany, NY 518-357-2200

Page 96 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sen. Lindsey Graham Says Construction Will Be Heart of Infrastructure Bill

All Island Equipment 39 Jersey St. • West Babylon, NY 11704 631-643-2605 www.allislandequipment.com

MAULDIN from page 8

and then assemble and sell these products,” Calder noted. “Most of our equipment is designed for the small commercial work that is done all over the U.S. and Canada. Ninety percent of asphalt manufactured is used to build roads and bridges.” “Your company is in the high-end of the food chain as far as skilled labor, then,” Graham asked. “Yes, our industry pays 35 percent above the national average,” Calder responded. “A trained welder, for instance, will make $23 to (L-R) are Cameron Calder; Glen Calder; Wayne Calder; Sen. Lindsey $25 an hour and we offer a full host of health Graham; David Calder; Johan “Kip” Eideberg, AEM; Brian Bieller, and retirement benefits. Our top hourly pay Dynapac. is $28 per hour.” The senator was impressed in hearing that, saying, “Those schools for their career days. We also have a standing policy that if a kid wants to try welding or machining, they can are good jobs.” When Graham inquired about how existing U.S. steel tar- spend a day here to learn a bit about those professions.” iffs have affected Mauldin and other AEM-member compaGraham, AEM Ready for nies, Calder answered by saying, “My steel pricing has gone Economic Jump-Start from 33 cents a pound to over 90 cents a pound. We are Later, in his public remarks in the Mauldin factory, understanding that this latest price increase has more to do with the uncertainties over whether the current tariffs will Graham said that in discussing the infrastructure bill with the continue or not. The steel producers are unwilling to load up asphalt equipment maker and the AEM he better understands on inventory that could be on the wrong side of the tariff if it the ramifications of passing a legislation that is properly funded to overhaul the American road, bridge, port and rail goes away. Calder also said that the equipment manufacturing busi- systems. “The AEM and its members have told me that if Congress ness was robust before the pandemic hit in early 2020. “It was very steady and solid and increasing every year can pass an infrastructure bill it would do more to jump-start until COVID-19,” he told the senator. “An infrastructure bill this part of the economy than any other single thing,” he would help our industry directly and all manufacturers in remarked. “That is what we are trying to push for the coungeneral for us to be more competitive globally. To pay the try. It would be a big benefit to the employees in this busiwages that we pay, a world-class infrastructure should ness.” Graham said the demand will go up for all of Mauldin accompany those wages to compete against countries with Paving’s equipment to fix and repave, not only South much lower wages.” Carolina’s roads and bridges, which are badly in need of repair, but also those across the country. Finding Workers — an Industry Headache In answer to a reporter’s question about bolstering the The AEM also hoped that provisions for job training for people wanting to work in its industries would be included in country’s cyber security in the wake of the Colonial Pipeline ransomware attack earlier in May, which caused long lines the comprehensive infrastructure bill. If that were to happen, Calder believed it would help solve and shutdowns for consumers at the gas pumps, Graham a daily worry about the shortage of qualified factory workers, acknowledged that the attack exposed the need to diversify the pipelines and strengthen their protections. such as machinists and welders. Such measures could possibly be accomplished within the “We currently recruit from all over [Upstate South Carolina] and from the technical schools,” he noted. “We are infrastructure bill. “Clearly, a single source is not good. It proves a cyber– partnering with them on welder training to get more employees. Mauldin Paving has 75 employees now, back to where Pearl Harbor could happen, a massive attack on multiple we were prior to when the 2008 recession hit, when we laid fronts that could shut us down as a nation,” the senator said. off about half our workforce. But we still need to find people “The best way to prevent that is to be strong and to let other to hire. I could hire about five welders and five assemblers countries know, like Russia, who allow these criminals to operate with impunity, that we will hold them accountable right now.” He added that several of his workers attended a machine for the next cyber-attack coming from Russian soil. Without trade school and have become invaluable to the manufactur- that, these attacks will keep continuing.” In closing, Graham remarked, “So, my hope is that someer. “So, are we including all the paths to success, not just col- time this year, Republicans and Democrats can do something lege, when they get out of high school?” he said to Graham. other than yell at each other and find a way to help the econ“Are we encouraging them along a path to become machin- omy grow. Now is not the time to raise taxes, people have ists and welders? I find, in our experience, that they get lost been hurting for the last year or so, so let’s get folks back to for several years before they wake up one day and decide work again and show the world that the best place to do busiwhat they want to do. Mauldin has sent welders to the high ness is still in America.”  CEG

ATS Equipment, Inc. 33 Locust Street • Boston, MA 02125 617-825-3600 487 Washington Street, Route 20 • Auburn, MA 01501 508-832-8500 51 Fall River Avenue • Rehoboth, MA 02769 508-379-6200 ww.atsequipment.com

Baschmann Services Inc. 1101 Maple Road • Elma, NY 14509 888-655-1101 www.baschmann.com

Chappell Tractor 454 Route 13 South • Milford, NH 03055 800-698-2640 251 Route 125 • Brentwood, NH 03833 800-616-5666 391 Loudon Rd. • Concord, NH 03301 800-358-6007 www.chappelltractor.com

Highway Equipment Company 615 State Route 33 • Millstone Township, NJ 08535 732-446-7600 www.highway-equipment.com

Westchester Tractor 60 International Blvd. • Brewster, NY 10509 845-278-7766 www.wtractor.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 97

Hitachi’s after sales solutions provide you with all the tools you need to manage your total cost of ownership quickly and easily, whenever and wherever you are. Utilize Hitachi’s Technology Programs and Apps to: ࠮ ,_[LUK LX\PWTLU[ SPML ࠮ 4HUHNL WYL]LU[H[P]L THPU[LUHUJL THJOPUL LɉJPLUJ` HUK VWLYH[VY WYVK\J[P]P[`

࠮ 4HUHNL `V\Y VWLYH[PUN JVZ[Z M\LS JVUZ\TW[PVU HUK VWLYH[VY LɉJPLUJ` PU [OL ÄLSK

*VU[HJ[ `V\Y SVJHS /P[HJOP ÔLLS SVHKLY KLHSLY VY ]PZP[ \Z H[ OP[HJOPÔLLSSVHKLYZ \Z `V\Y[VVSZ [V SLHYU TVYL HIV\[ [OL MVJ\ZLK /P[HJOP HWWYVHJO [V Z\WWVY[PUN `V\ `V\Y I\ZPULZZ HUK `V\Y /P[HJOP ÔLLS SVHKLYZ

Contractors Sales Co. Inc. 121 Karner Road Albany, NY 12212-2010 888-468-5479 1283 Dolsontown Road Middletown, NY 10940 845-956-0222 www.contractorssales.com

Elliott & Frantz, Inc. 450 E. Church Rd. King of Prussia, PA 19406 610-279-5200 Jessup, MD 410-792-9134 Hagerstown, MD 301-733-8100 Harrisburg, PA 717-652-5430 Delmar, DE 302-846-3033 www.elliottfrantz.com

Medico Construction Equipment Inc. 1500 Highway 315 Wilkes-Barre, PA 18702 570-825-7711 3647 Shafers Schoolhouse Road Stroudsburg, PA 18360 Dealer Imprint Area 570-420-0877 www.medicoce.com

REPUTATIONS ARE BUILT ON IT A FULL LINE OF WHEEL LOADERS

• 14 Models • 25 HP – 520 HP

Hitachi Construction Machinery Loaders America Inc. hitachiwheelloaders.us/yourtools

Tracey Road Equipment, Inc. 6803 Manlius Center Road 19598 Cady Road East Syracuse, NY 13057 (Exit 44-Watertown Center off I-81) 800-872-2390 Syracuse Adams Center, NY 13606 888-335-0200 Watertown 1523 Route 11 North Kirkwood, NY 13795 9598 River Road • Marcy, NY 13403 800-370-9488 Binghamton 800-872-2390 300 Middle Road • Henrietta, NY 14467 866-950-6210 Rochester www.traceyroad.com

Page 98 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Efficient High Capacity Cobra Screening Bucket model K15 for 16 21 ton excavators, Effectively Screen Soil, Compost, Millings, Demo Waste / save on hauling / dumping costs Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

11-12 AP

NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE Joseph Fazzio Inc.com • 856-881-3185 N.J.

BUCKETSBOX: GRAVEL, BEDDING BOXES DUMP HOPPERS SKID STEER ATTACHMENTS

11-12 TM

EXCAVATOR, MINI EXCAVATOR & BACKHOE BUCKETS ALL FULLY DRESSED W/ PINS & SIDE CUTTERS

Joseph Fazzio Inc.com • 856-881-3185

11-12 TM

SEVERE SERVICE ASPHALT CUTTERS (15 Models Available) Starting @ $1450.00 www.attachmentsintl.com attintl@loretel.net or Call Us @ (218) 863-6444 10-11 AP

888-280-1710 11-12 JP

96” X 240” & LARGER ALL THICKNESSES - PREMIUM GRADE A570-50 ALSO - LARGE STEEL ANGLES JFISTEEL.COM • 856-881-3185 11-12 TM

PLATE

Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 11-12 TM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 11-12 EB 866-294-6103

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine(one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. Additional $25 to place online • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Construction Equipment Guide today at

800/523-2200

MAY/JUNE 2021 CRANE SAFETY COURSES May 25 – May 28, 2021 Mobile Crane Inspector Training, Cincinnati, OH May 26 – May 28, 2021 Rigging Inspector Training, Orlando, FL June 1 – June 4, 2021 Overhead Crane Inspector Training, Orlando, FL June 8 – June 10, 2021 Forklift Operator Train The Trainer, Orlando, FL June 8 – June 10, 2021 Aerial Work Platform Train The Trainer, Houston, TX June 14 – June 17, 2021 Overhead Hoist Maintenance Training, Houston, TX June 15 – June 18, 2021 Mobile Crane Inspector Training, Orlando, FL June 21 – June 25, 2021 Mobile Crane Train The Trainer, Houston, TX June 22 – June 24, 2021 Rigging Inspector Training, Cincinnati, OH June 22 – June 25, 2021 Overhead Crane Train The Trainer, Orlando, FL June 28 – June 29, 2021 Qualified Signal Person Training, Houston, TX June 28 – June 29, 2021 Crane Assembly & Disassembly Director Training, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

NEW FOR 2021! Cement Production Pavilion (North Hall): Features the leaders of the equipment and support services used in cement processing: kilns, separators, mills, dryers, silos, bagging, automation & instrumentation. Registration for WOC 2021 is now open. PLEASE BE ADVISED: There will be no onsite registration this year due to new COVID safety protocols. You MUST REGISTER ONLINE before coming to the show. Visit www.worldofconcrete.com for more information and registration. Registration questions? Call Registration at 866.860.1983 or email Registration@WorldofConcrete.com. HOUSTON BUILD EXPO (HBE) 2021 Houston Build Expo Dates: June 9-10, 2021 Times: Exhibit Hours: 10:00 a.m. to 3:00 p.m. Classes Start at 9:30 a.m. Each Day Location: NRG Park Center (Hall A1), Houston, TX Description: Houston Build Expo has gained success by providing invaluable networking and educational opportunities. It brings with it the chance to meet with exhibitors, check out new developments and keep a close eye on the existing competition. In addition, one can try out new products, attend demonstrations and compare features and prices. This event displays products like buildings, Construction materials, Tiles and paving stones, Building components and structural elements, Building machinery, building equipment, tools, scaffolds, and formwork, Domestic and building services control technology in the Building Construction industry. Registration is now open. Exhibit Floor & Classes are complimentary for all industry professionals. To register, visit http://buildexpousa.com/houston-build-expo/ Need Help? Call 877.219.3976.

ASSOCIATED BUILDERS AND CONTRACTORS (ABC) 2021 Inclusion, Diversity and Equity Summit - Virtual Event Dates: June 14, 2021 Times: 11:00AM - 6:00PM EST Speaker: Doug Harris CEO of the Kaleidoscope Group Description: ABC's virtual Inclusion, Diversity and Equity Summit will explore the complexity of IDE in today's world and evaluate its historical journey and sustainable future in the construction indusASSOCIATED EQUIPMENT DISTRIBUTORS (AED) try. 2021 AED Summit (Virtually AND In-Person) Doug Harris, CEO of the Kaleidoscope Group, will lead attendees in Dates: May 24–May 26, 2021 NEW DATES! an interactive, and virtual discussion on fostering inclusion and ultiLocation: The Mirage Hotel, Las Vegas, NV Description: AED is bringing the 2021 Summit to the lively city of mately achieving exceptional business outcomes. Las Vegas, where the sky is the limit! Summit is the industry’s safest Registration is now open. interactive and innovative equipment distribution event in North America. The health and safety of our members, employees and ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) partners are AED’s highest priority. We have securely designed three Financial/HR Symposium June 28 – June 30, 2021 full days of education, featured presentations, meeting spaces and Dates: Location: Napa Valley Marriott Hotel & Spa networking opportunities specifically with our dealers in mind. 3425 Solano Avenue, Napa, CA 94558 2020 was a learning curve for us all, but you do not have to figure it all out on your own. Find out where the industry is headed so you Description: Learn from industry experts on both the finance and HR side about the most pressing topics impacting equipment distribucan be at the forefront by attending the AED Summit. The AED Summit is your annual opportunity to come together with tors. Bring back tools and solutions to the issues that are affecting professionals across the heavy equipment industry spectrum to your dealership. In addition to hearing new ideas, learning about improve yourself and your team and to build meaningful connections. best practices, and receiving regulatory and legal updates, attenAttendees can choose how they would like to attend this year; that’s dees will have several opportunities to brainstorm and network with right, you have options! We are offering an in-person or virtual reg- like-minded dealership professionals. istration to accommodate our members’ needs for the same The Financial/HR Symposium is an ideal event for all finance and price. Regardless if you choose to join us in Las Vegas or to view HR professionals, whether new or seasoned. Are you planning on bringing a spouse, family member, or guest to from the comfort of your office Napa with you? If they would like to join us for meals and evening Regular registration ends on May 22, 2021. receptions, but not participate in the conference, please register Late registration starts on May 23, 2021. Room blocks for the new dates of 2021 AED Summit are avail- them as a guest at the rate of $300. Early registration ends on May 26, 2021. able. Attendees can choose to change their in-person registration to a Regular registration starts on May 27, 2021 and ends on virtual registration at any time. If you wish to do so, please email June 22, 2021. Late registration starts on June 23, 2021. help@aednet.org to inform the AED team. For more information and to register for this event, please visit For more information and to register for this event, please visit https://aednet.org/events/financial-hr-symposium. https://aednet.org/events/summit. If you need assistance registering, please call 800-388-0650. If you need assistance registering, please call 800-388-0650. WORLD OF CONCRETE (WOC) World of Concrete 2021 Dates: June 8-10, 2021 Education: June 7-10, 2021 Times: 9:30 am - 5:00 pm Location: Las Vegas Convention Center Description: World of Concrete is the commercial construction industry’s largest annual international event for concrete and masonry professionals and puts these kinds of immersive opportunities at your fingertips—join your community here and experience real, tangible results. Hands down, the best decision you'll make. EXHIBITS: Original equipment manufacturers from around the world and exclusive U.S. distributors of equipment, tools, products and services for the commercial construction, concrete and masonry industries. WOC attracts approximately 1,500 exhibiting companies and occupies more than 700,000 square feet of indoor and outdoor exhibit space. WHO ATTENDS WOC? More than 60,000 industry professionals from all around the world, representing all segments of the construction industry: Commercial Contractors, Concrete Contractors, Concrete Pumpers, Construction Managers, Dealers/Distributors, Decorative Concrete Contractors, Designers and Specifiers, General Contractors, Block/Segmental Unit Producers Masonry Contractors, Architects, Engineers, Block Producers, Ready Mix Producers, Rental Equipment Centers, Repair Contractors, Residential Contractors, Specialty Concrete Contractors, Precast, Pipe and Block Producers, Precast/Prestressed Producers, and more.

ASSOCIATON GENERAL CONTRACTORS OF AMERICA (AGC) 2021 Construction Safety, Health & Environmental Conference Dates: July 20 – 22, 2021 Location: Washington DC AGC’s Construction Safety, Health & Environmental Conference is the industry’s foremost annual conference to hone in on the most critical safety, health and environmental compliance and risk issues impacting the business of construction. Whether your goal is protecting the safety and health of the men and women working in construction or protecting the environment during the construction process – this is the conference for you. The conference provides educational options for attendees through a mixture of plenary and breakout sessions which cover issues in three broad categories: • Managing safety, health and environmental requirements and risk • Factoring safety, health and environmental concerns into projects • Expanding your knowledge and skills Who Attends? Corporate, regional, and project safety and health and/or environmental staff representing construction firms of all sizes and who perform various types of construction work. Organizations that offer safety and health and/or environmental services and supplies to the construction industry also benefit from attending. Attendance ranges around 300 participants each year. Registration COMING SOON. For more information visit https://shec.agc.org

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 99

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODLES. I NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). REGARDS AHMED, SALES/PURCHASE MANAGER WWW.IUKANDCO.COM EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING FOR USED HITACHI EXCAVATORS LIKE EX200, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 ––––––––––––––––––––––––––––––––

WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. KINDLY SEND US YOUR OFFERS IF ANY AVAILABLE. THANKS. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. IF YOU HAVE ANY UNITS AVAILABLE PLEASE LET ME KNOW. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET ––––––––––––––––––––––––––––––––

WANTED (US): CAT 966F & CAT 966F II. IF ANY ONE HAS ONE AVAILABLE PLEASE LET ME KNOW. THANK YOU. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03350237541 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODLES BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S3 OFF-HIGHWAY TRUCKS - LOOKING FOR REAR END DIFFERENTIAL FOR 30TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) ––––––––––––––––––––––––––––––––

WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 –––––––––––––––––––––––––––––––– WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– \WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. ––––––––––––––––––––––––––––––––

Page 100 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS

• Los Angeles, CA June 25, 2021

www.lyonauction.com 315-633-2944

• Truro, NS June 28, 2021

• Brewerton, NY May 26, 2021 For: Turnkey Restaurant & Bar, Generators & Lawnmowers • Online Auction May 27, 2021 For: Late Model Construction Equipment & more (Mexico) • Limestone, ME May 29, 2021 For: Construction Equipment & more • Rochester, NY June 5, 2021 For: Retirement Auction, Finest Masonry Contractor in NE

• Southeast Regional Event June 29, 2021

DEANCO AUCTIONEERS

• Wasilla, AK July 17, 2021

www.deancoauction.com 601-656-9768

AUCTIONS INTERNATIONAL

• Philadelphia, MS May 26, 2021 For: Huge Equipment, Truck & Trailer Auction

www.auctionsinternational.com 800-536-1401 • ONLINE ONLY May 24 - 30, 2021 • ONLINE ONLY May 31 – June 6, 2021 • ONLINE ONLY June 7 - 13 2021

• Passaic, NY June 10, 2021 For: Retirement, Complete Liquidation, Mack Trucks, Trailers & more

www.barnoneauction.com 866-372-1700

• Philadelphia, MS July 21 - 22, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction

• Acworth, GA Wed., June 30, 2021 For: Retirement Auction for Total Development, Inc.

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • ONLINE ONLY May 27, 2021 For: First Capital Premier Timed Auction

• Philadelphia, MS Sept. 15 - 16, 2021 For: Huge 2-Day Equipment, Truck J.M. WOOD & Trailer Auction

AUCTION COMPANY

BAR NONE AUCTION

• Philadelphia, MS www.jmwood.com Nov. 17 - 18, 2021 800-447-7085 For: Huge 2-Day Equipment, Truck • Montgomery, AL & Trailer Auction June 15 - 18, 2021 For: 48th Annual Summer Auction

• Online Only Fri., May 28, 2021 For: Woodburn Equipment Auction DON SMOCK

• Middletown, NY • Online Only June 11, 2021 For: Very Major Job Completion of Sat., June 12, 2021 For: Sacramento Equipment Amusement Park Auction • Las Vegas, NV • Online Only June 12, 2021 Fri., June 25, 2021 For: Late Model Rental For: Woodburn Equipment Auction Construction Equipment & more

• Timed Online June 12 - 17, 2021 For: Retirement Construction & more Auction (Canada)

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• Chehalis, WA June 29, 2021

• Plainfield, CT June 9, 2021 For: Late Model Construction & Ag Equipment and more

• Athens (Knoxville), TN June 12, 2021 For: Commercial Properties & Construction Equipment

Coming Auctions

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY June 1, 2021 • ONLINE ONLY June 8, 2021

RITCHIE BROS. AUCTIONEERS

• ONLINE ONLY June 15, 2021

www.rbauction.com 402-421-3631

• ONLINE ONLY June 22, 2021

All our auctions are now online bidding only!

• ONLINE ONLY June 29, 2021

• Chilliwack, BC May 25-26, 2021

BIG IRON AUCTIONS

• Rocky Mtn Regional Event May 26-27, 2021

www.bigiron.com 800-937-3558

• Williston, ND June 2, 2021

• ONLINE ONLY May 26, 2021

• Phoenix, AZ June 4, 2021

• ONLINE ONLY June 2, 2021

• Saskatoon, SK June 8-9, 2021

• ONLINE ONLY June 9, 2021

• Sacramento, CA June 9, 2021

• ONLINE ONLY June 16, 2021

• Las Vegas, NV June 11, 2021

• ONLINE ONLY June 23, 2021

AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Pendleton, IN June 18, 2021 29th Annual Summer Auction • Pendleton, IN September 17, 2021 29th Annual Fall Auction

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 11, 2021 For: Truck, Trailer & Equipment Auction • Marietta, PA Fri., August 13, 2021 For: Truck, Trailer & Equipment Auction

J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864 • ONLINE Thurs., May 27, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More • ONLINE Thurs., June 24, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More

• Boonsboro, MD Thurs., June 3, 2021 For: Virtual/Live Broadcast for David M. Merchant, Inc.

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE ONLY Wed., June 23, 2021 For: Heavy Equipment, Truck & Trailer Auction

• Houston, TX June 15-16, 2021

BLACK STAR ACA

• Great Plains Regional Event June 17, 2021

www.blackstaraca.com 800-610-2192

IRON AUCTION GROUP

• Northeast Regional Event June 22-23, 2021

• ONLINE ONLY June 9, 2021

• Great Lakes Regional Event June 24-25, 2021

• ONLINE ONLY June 23, 2021

• Princeton, WV Wed., June 9, 2021 For: Unreserved Bankruptcy & Consignment Auction

www.ironauctiongroup.com 864-546-1216

• ONLINE Thurs., June 10, 2021 For: RK&R Dozer Surplus Equipment Auction

• Kissimmee, FL June 12, 2021 For: Late Spring Construction & Transportation Public Auction

• ONLINE Wed., June 16, 2021 For: Vehicles & Equipment Auction

• Morganton, NC June 22, 2021 For: Public Inventory Reduction Auction

ROSEN & COMPANY, INC.

• Pelzer, SC June 24, 2021 For: East Coast Spring Construction & Transportation Public Auction

• Cleveland, OH Fri., May 28, 2021 For: Spring Construction Auction

• Stanton, TX July 14, 2021 For: Featuring Oilfield, Construction Equipment & much more

STEFFES GROUP INC.

• Online Only July 29, 2021 For: Wenco Energy Equipment & Materials Online Liquidation

JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Blairsville, GA Wed., May 26, 2021 For: ASC Paving Co. Complete Liquidation Public Auction • Decatur, TX Thurs., June 24, 2021 For: Fleet Reduction & Rental Return Public Auction • Atlanta, GA Wed., July 28, 2021 For: Jackson Paving Co.

MYRON BOWLING AUCTIONEERS, INC. JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • ONLINE ONLY June 3 - 10, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

HUNYADY AUCTION COMPANY • ONLINE ONLY www.hunyady.com 215-361-9099

For: Contractor Inventory Reduction Public Auction-Simpson & Simpson, LLC, and Others, Live & Online

www.myronbowling.com 513-738-3311 • WEBCAST ONLY May 28, 2021 For: Marine Builders, Inc Liquidation Webcast Auction

AUCTIONEERS, INC.

• Newton, NH June 5, 2021 For: Northeast US Live & Online Public Auction • Gillsville, GA June 8, 2021

www.steffesgroup.com 701-237-9173 • Timed Online May 21 - 26, 2021 For: Steffes Upper Midwest Location • Timed Online June 4 - 9, 2021 For: Upper Midwest Location • Timed Online June 8 - 15, 2021 For: Steffes Truck & Transportation Auction • Timed Online June 8 - 16, 2021 For: Litchfield Farm Equipment Auction • Timed Online June 18 - 23, 2021 For: Steffes Construction Consignment Auction, Upper Midwest Location • Timed Online June 23 - 30, 2021 For: Bud’s Welding & Machine Shop Estate Auction (ND) • Timed Online June 23 - 30, 2021 For: Steffes Construction Consignment Auction, Upper Midwest Location

PURPLE WAVE AUCTION

www.purplewave.com August 5 – 12, 2021 866-608-9283 For: Heavy Equipment, Contractors • ONLINE Equipment, Trucks & Vehicles Wed., May 26, 2021 • ONLINE ONLY For: Ag Equipment September 30 – October 7, 2021 For: Heavy Equipment, Contractors • ONLINE Thurs., May 27, 2021 Equipment, Trucks & Vehicles For: Truck & Trailer Auction • ONLINE ONLY • ONLINE December 2 - 9, 2021 For: Heavy Equipment, Contractors Wed., June 2, 2021 For: Vehicles & Equipment Auction Equipment, Trucks & Vehicles • ONLINE Thurs., June 3, 2021 JEFF MARTIN For: Construction Equipment www.jeffmartinauctioneers.com 601-450-6200

www.rosenandcompany.com 216-990-1831

• ONLINE Tues., June 8, 2021 For: Government Auction • ONLINE Wed., June 9, 2021 For: Ag Equipment • ONLINE Thurs., June 10, 2021 For: Truck & Trailer Auction

WEEKS FARM MACHINERY AUCTIONS, INC. weeksfarmmachinery.com 229-985-5048 • ONLINE ONLY June 12, 2021

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • ONLINE ONLY Sat., June 12, 2021 For: Public Auction

YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Findlay, OH June 3, 2021 For: Heavy Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 101

JCB Helps Canyon Springs Landscaping ‘Change Status Quo’

Important Auctions

315.633.2944 • www.lyonauction.com • www.lyonauctionlive.com

AUCTION CALENDAR

us on

@Lyo nAuc tion!

Go to WWW.LYONAUCTION.COM for START-STOP times on TIMED / VIRTUAL AUCTIONS 1.

Loading material with the JCB 409 rubber-tired loader. CANYON from page 42

had a difficult situation in the middle of the night when we were plowing, and Alta’s service department was able to respond to us within a half an hour at our site. “Parts are typically readily available to us; the longest I’ve ever had to wait for a part was three days and that is by far the exception to the rule.” For more information about Canyon Springs Landscaping, visit www.canyonspringslandscaping.com. For more information about Alta Equipment, visit www.altaequipment.com. 

LIVE: Wednesday, May 26: BREWERTON, NEW YORK: TurnKey Restaurant & Bar, Generators, Lawnmowers. 2. ONLINE AUCTION: Thursday, May 27: QUERETARO, MEXICO: Late Model Cat, Case, John Deere, Volvo Construction Equipment, Aerial Lifts, Forklifts, Trucks and Trailers, Large Quantity Attachments & Support Equipment. 3. LIVE: Saturday, May 29: LIMESTONE, MAINE: PHASE II. Former Loring Air Force Base. Construction Equipment, Aerials, Attachments New & Used Support, All Types of Trucks and Trailers. 4. LIVE: Saturday, June 5: ROCHESTER, NEW YORK: Retirement Auction, 1 Owner Complete Liquidation. One of the Finest Masonry Contractors in the Northeast, The Best of the Best Equipment, Vehicles and Especially the Support and Attachments. HIGHLIGHTS: Genie S-85, Genie 65' Manlift, Genie 45' Manlift, Genie 40' Boom Lift, Genie Rough Terrain Forklift, Komatsu Warehouse Forklift, Gehl Skid Steer, IR Air Compressor, Kaeser Air Compressor, Rough Terrain Scissor Lift, JLG Electric Scissor Lift, Electric Scissor Lift, Kubota Mini Excavator, Dump Truck, 2015 GMC, 2018 Isuzu Stake Body, 2008 GMC, P&J 22' Flatbed Trailer, Dump Trailer, Water Trailer, Covenant 24' Trailer, Royal 12' Trailer, 60W Standby Generator. 5. LIVE: Wednesday, June 9: PLAINFIELD, CONNECTICUT: Property is Sold. Late Model Construction and Aggregate Equipment, Trucks and Trailers, Attachments, Support. The Best of The Best of The Best. 6. LIVE: Thursday, June 10: PASSAIC, NEW JERSEY: Retirement, Complete Liquidation. Mack Trucks, Trailers, Support, Shop Equipment, Parts. 7. LIVE: Friday, June 11: MIDDLETOWN, NEW YORK: Very Major Job Completion of a Major Local Amusement Park. HIGHLIGHTS: 18 Motor Scrapers: (4)2011 Cat 621G, Cat 637D, (2)Cat 631E, (3)Cat 621F, (2)Cat 621E, (3)Cat 621B, (3)Cat 627B, Vermeer 175 Commander, Vermeer Navigator D36X50, Cat 980C, Cat D11N, (2)Cat D9N, Cat D9G, (2)Cat D9L, Cat D8N, Cat D8L, (2)Cat 365BL, (2)Cat 345CL, Cat 330CL, PLUS: all Types Support Including Tractor Loader Backhoes, Skid Steers, Telescopic Forklifts, Boom & Scissor Lifts, Generators, Air Compressors, All Types Trucks and Trailers, Support and Attachments. 8. LIVE: Saturday, June 12: LAS VEGAS, NEVADA: Late Model Rental Construction, Utility Equipment, Telescopic & Warehouse Forklifts, Large Quantity Boom & Scissor Lifts, Light Plants, Generators, Welders, Air Compressors, Pickups, Trailers and Support Equipment. 9. LIVE: Saturday, June 12: ATHENS (Knoxville), TENNESSEE: Four Prime Commercial Properties and Construction Equipment. 10. TIMED: Saturday, June 12 through Thursday, June 17: MONTREAL, CANADA: Retirement Auction Construction Equipment, Tractor Loader Backhoes, Skid Steers, Dump Trucks, Truck Tractors, Service Trucks, Excavator Buckets, Hydraulic Hammers. 11. LIVE: Sunday, June 13: MAHWAH, NEW JERSEY: Very Large Stone Wholesale Business. Over 600 Pallets of the Finest Stone. 12. LIVE: Monday, June 14: CICERO, NEW YORK: Retirement Auction. Vintage Farm Machinery and Support, Horse Equipment, Several Buildings and more. 13. LIVE: Wednesday, June 16: HOUSTON, TEXAS: Late Model Construction Utility Equipment, All Types of Forklifts, Aerial Lifts, Truck Tractors, Pickups, Cab & Chassis, Attachments and Support Equipment. 14. LIVE: Friday, June 18: PARKERSBURG, WEST VIRGINIA: Late Model Rental Returns Primarily Cat, John Deere, Komatsu, JLG. (2)Cat 725C, (5)JLG 12,000& 10,000 Telescopic, (10)JLG Boom Lifts, (10)JLG Scissor Lifts, Cat D6T, Cat D6N, Cat 320F, Cat 313F, Cat 308 and more. 15. LIVE: Saturday, June 19: ATLANTIC CITY, NEW JERSEY: Very Late Model Construction, Utility, Rental Fleet Equipment, Aerial Lifts, Boom & Scissor Lifts, All Types of Forklifts, Attachments, Support, Truck Tractors, Dump Trucks, Service & Utility Trucks, Water Trucks, Pickups, Garbage Trucks and more. 16. LIVE: Thursday, June 24: SYRACUSE, NEW YORK: Construction Equipment Dispersal and Real Estate Including 4 Apartments, Single Family Home and New Multi Storage Unit. 17. LIVE: Saturday, June 26: YOUNGSTOWN, OHIO: Retirement Auction. Major Bridge Contractor. Cranes, Forklifts, Construction Equipment, All Types of Fords and Beams, Vehicles, Plus Real Estate Including the Shop & Office set up for any type of business.

18.

LIVE: Saturday, July 10: PROVIDENCE, RHODE ISLAND: Large Quantity of Utility, Pickups, Vans, Bucket and Digger Derrick Trucks, Construction Equipment, Aerial Lifts, Support & Attachments. 19. LIVE: Friday, July 16: SYRACUSE, NEW YORK: 1-Owner, Very Large Job Completion of Several Major Jobs in the area. HIGHLIGHTS: All Types of Construction & Paving Equipment, Utility Equipment, Truck Tractors, Dump Trucks, Service & Pick Up Trucks, Various Types of Equipment Trailers Large and Small. 20. LIVE: Saturday, July 17: CANASTOTA (Syracuse), NEW YORK: In Conjunction with The Famous Alex Lyon & Son Haycamp & Barbecue. The Fanciest Late Model Construction Equipment, Aerial Lifts, Telescopics, Attachments, Support, Truck Tractors, Dump Trucks, All Types of Trailers. The Fanciest & Best Equipment Ever Assembled for Public Auction. 21. LIVE: Saturday, July 31: ALBANY, NEW YORK: Retirement Auction. Large Quantity of Everything-Construction Equipment, All Types of Trucks, Garbage Trucks and Large Amount of Support Equipment. 22-23. LIVE: Wednesday, August 4 & TIMED: Thursday, August 5: SYRACUSE (Pompey), NEW YORK: In Conjunction with Lee Publications & Empire State Farm Show. Late Model Agricultural & Construction Equipment, Trucks(all types), Trailers, Attachments, Large Quantity Support Equipment. 24. LIVE: Saturday, August 14: HARTFORD, CONNECTICUT: Retirement Auction. Complete Liquidation. Over 51 Years in Business. Construction Equipment, Aggregate, Aerial Lifts, Forklifts, Demolition Equipment, Truck Tractors, Dump Trucks, Service, Utility and Pickup Trucks, Attachments, Support, Shop Equipment. 25. LIVE: Friday, September 10: PITTSBURGH, PENNSYLVANIA: Late Model Cat, John Deere, Komatsu Earthmoving Equipment, Attachments, Support, All Types of Trucks & Trailers. 26. LIVE: Wednesday, September 22: MONTREAL, CANADA: Phase 2 Retirement Auction. Late Model Rental Returns, Utility Equipment, Aerials, Trucks, Trailers, Support Equipment. 27. LIVE: Thursday, October 7: PITTSBURGH, PENNSYLVANIA: Rental Fleet Construction & Earthmoving Equipment, Forklifts, Aerial Lifts, Attachments, Trucks, Trailers and Support Equipment.

NEW DATES TO BE ANNOUNCED 28.

PARKERSBURG, WEST VIRGINIA: Complete Retirement Auction. Approximately 100 Antique Collectible Cars and Trucks Plus Truck Tractors and Trailers, that were used to Transport the Collectibles Properly. Small Amount of Late Model Skid Steers, Mini & Midi Excavators. 29. CLEVELAND, OHIO: Large Job Completion Auction. Large Quantity Construction Equipment Including: Cat D10R, Cat D6RLGP, JD, 650H, Cat 950F, Takeuchi TB260, Takeuchi TB250, Takeuchi TB180, Cat 320DL, Cat 245B, (3)JD 350G, Takeuchi TL10, Takeuchi TL8, Special Wirtgen 2500, Trucks(all types), Trailers, Support, Attachments. 30. NEW ENGLAND: Retirement Auction (over 70 years of collecting only the best). One of the Finest Collections of Antique Construction Equipment: Cat, Holt, JD, IH. Ag Equipment, Truck Tractors, Dump Trucks (Everything is Beautiful and Operating), Collectible Toys, Dolls, Large Quantity of Parts. Never Before has there been a Sale Like This. 31. LINCOLN, MAINE: Two Major Job Completions. 1 Very Large Forestry Featuring All Types of Logging Equipment and Trucks, and 1 Large Construction Equipment Spread of Later Model Cat, Komatsu, John Deere, New Holland Earthmoving Equipment, Forklifts, Aerials, Generators, Air Compressors and more.. 32. PORTLAND (Auburn), MAINE: Retirement Auction. Late Model Cat, Komatsu, Case, Volvo Construction Equipment, Plus Telehandlers, Generators, Boom & Scissor Lifts, Trucks, Trailers and Support. 33. FAYETTEVILLE, ARKANSAS: Late Model Construction, Utility, Compact Equipment, Agricultural Tractors & Farm Implements, Large Quantity Landscape Equipment 0° Radius Movement, Utility Vehicles, 4-Wheelers and more. 34. TORONTO, CANADA: Late Model Rentals of Agricultural Equipment, Construction Equipment, Attachments, Tools, Support, Various Trucks and Trailers. 35. WESTMINSTER, VERMONT: Former Estate, Real Estate Auction. 2 Parcels 1) 1.63+ Nice House 3,000± sq.ft.and Motel Consists of 13 Units, 2) 7.12± Adjacent Parcel.

www.lyonauction.com $ISTRACTIONSÀ#AUSEÀ$ESTRUCTION $ISTRACTION GOV

Page 102 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2 Up pcomiing Auctions in June 2021

669 Marina Drive, B-2 Charleston, SC 29492 (864) 546-1216

WV AL# 2399 GA AL# AU-C003126

AUCTION 1: Unrese erved Bankrupttcy and Con nsignment Aucttion

AUCTIION 2: Retire ement Auction for Total Development, Inc.

June e 9, 2021 | 9 AM M EST

June 30 0, 2021 | 10 AM M EST

974 Greasyy Ridge Road | Princeton n, WV 24739

4185 Cantrell Road NW | Acworth, GA G 30101

To consign your items, con ntact: Matt McGaffee | (276) 451-8921 matt@ironauctiongroup.ccom m Jared d McGaffee | (276) 202 2-6800 jared@ d@ironauctiongroup.com

Live and Online Bidding g

Text “iro on” to 888-401-2999 to subscrribe to our text alerts.

These e auctions will feature construction onstruction equipment,, trucks, trailers, support equipment, pment, and much more!!

Terry McGa Gaffee | (276) 608 8-3787 terry@irona i auctiongroup. i com Sam Ingram | (7 (770) 312-1 1432 sam@ironauctio sam@ironauction i iongroup.c ongroup ccom

For more e information and item descriptions, visit IronA AuctionGroup.com. p PLEASE NOTTE: Masks and d social distancing cing required for o onsite guests ests.

Absolute Auction Virtual/Live Broadcast David M. Merchant, Inc. Thurs., June 3, 2021 – 9:00AM Boonsboro, Maryland (Hagerstown/Frederick Area) Notice: Due to the untimely death of David M. Merchant, a well-respected excavating contractor and member of his community, the heirs of the estate have decided to cease operations of his excavating business and liquidate all assets at public, absolute auction. All items in the auction are owned by David M. Merchant, Inc. and will sell to the highest bidder without minimums or reserves via a virtual, live-broadcast absolute auction. Auctioneer’s Note: David Merchant has an outstanding reputation for quality workmanship, quality equipment and top-notch maintenance. The majority of this equipment had been purchased new and has been routinely maintained by local dealerships and in-house preventative maintenance programs. Items Include: Hydraulic Excavators and Attachments • Crawler Loaders • Articulated End Dump • Tractor Loader Backhoes and Attachments • Vibratory Compactor • Tri-Axle and Single Axle Dump Trucks • Truck Tractors and Lowboy Trailers PLUS: Air Compressor • RAMMAX Trench Compactor • STOW Concrete Saw • Electric Mortar Mixer • Blasting Magazine Boxes • 8x16 Trench Box • Stone Box • Road Plate • 8x20 Storage Container • (2) Storage Van Trailers • Road Signs And Safety Cones • ABS, PVC And Galvanized Pipe • Contractor Equipment And Shop Tools

Call (800) BID-N-BUY or Email sales@hunyady.com For Complete Descriptive Brochure! www.Hunyady.com PA Auction License No: AY000281 While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Deere Announces 2021 ‘Own It’ Low Monthly Payment Program John Deere unveiled its 2021 “Own It” low monthly payment program, available for customers who want to own John Deere compact and mid-size equipment. Customers can utilize the low monthly payment program to get on the path to equipment ownership for a variety of compact and mid-size equipment models, including the 316GR and 324G skid steer loaders; the 317G compact track loader; the 26G, 75G and 85G excavators; and the 204L compact wheel loader with specific factory-installed configurations. “Each year, our low monthly payment program helps us support our customers and empower them to become machine owners as they grow their businesses,” said Greg Bauer, manager, tactical marketing and production systems. “The ‘Own It’ program providers customers with financial flexibility while promoting the growth of fleets and

jobsite capabilities without breaking the bank.” Operators can own various compact and mid-size excavator models, including the 26G with a canopy configuration or the cab configuration, as well as the 75G excavator and the 85G. Both mid-size excavators included in the program feature cabs and rubber crawler pad tracks. For compact offerings, the 316GR, 317G and 324G skid steer small-frame loaders and 204L compact wheel loaders are available in a canopy or cab configurations. Customers also can purchase the 316GR with the EH joystick controls and the attachments performance package. The “Own It” program will run through Oct. 31, 2021. Exclusions apply in the United States. For more information, visit www.deere.com/ownit. 

Keep Up With All the Industr y News Subscribe to

800/523-2200

Construction Equipment Guide Today! Toll Free

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 103

Page 104 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Quarrick Sells Thousands of Items at Auction in Pa.

uarrick Equipment & Auctions held an auction May 6 at its Uniontown, Pa., auction facility and equipment yard. The auction attracted a large crowd of onsite attendees from Pennsylvania and surrounding states, while attracting heavy online bidding from equipment buyers vying for the more than 1,000 pieces of equipment up for bid. The auction featured an extensive selection of aerial lifts and telehandlers, backhoes, dozers, excavators, haul trucks, paving equipment, wheel loaders and other equipment, including a variety of agricultural and construction support equipment. Established in 1983, Quarrick Equipment & Auctions is a family-owned business now headed by Mike Quarrick. The company conducts regularly scheduled auctions on site at its facility with online bidding and specializes in on site com-

plete or partial liquidation auctions of construction, farm and industrial equipment. For more information, visit www.quarrickauction.com.  CEG

Steve Mizla of Apex Electrical Solutions tries out this Caterpillar 304 CR mini-excavator at the auction. Quarrick Equipment & Auctions’ Mike Quarrick keeps the bidding moving along at a fast clip.

Toby Grove of Grove Farms came in from Garrett County, Md., to look over the skid steers up for bid.

Dave Harper of Dave Harper Construction, based in Uniontown, Pa., recruited his father, Ron Harper, to assist in his search for a skid steer.

Auctioneer Evan Goodrich calls out the bids.

Chris Jordan of C&C Service tries out a Caterpillar D4C XL dozer at the auction.

Thomas Brown of Outdoor Tranquility and his son, Ty, look over this John Deere 240D excavator.

CN Metal’s Calvin Nissley Jr. considers a bid on this JCB 407 wheel loader.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 105

Page 106 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HBS’s Telematics Integration With Kubota Bolsters Support TRUCK, TRAILER & EQUIPMENT QUIPMENT ONLINE LINE AUCTION UCTION Fridayyy,, June JJun une 11th 11th 9:00 9:00 AM AM Marietta, Mariett tta, P PA A

Ring 1 - 9 A AM; M; R Riiing ng 2 - 9: 9:30 30 A AM; M; R Rin in ng g 3 - 112:00 2:00 P PM M

Stop S top iin n ffor or P Preview review D Days ays 6 6/7-10 /7-10

Online ly Bidding On

Selling Absolute! s

See S ee Full Ful l Invento Invven to orryy a att ww www. ww w.hessau hessau uctioneers.net TRA RAC ACTORS RS, TRUCK KS, DUMP PS S, TRA RAILE AILLERS RS S, PIC ICKUPS CKUPS PS, SERV RVIC VIC CE TRUCK UC CKS, RV V S, A ATTV T V S, LG SEL LG ELLEECT CTION OF NEW SK KIID D LOA ADER ER ATT TTTACHMEN ACHMEN ACHMEN NTS TS/IMP IMPLE PLEMENT MENTS, LAND ANDSCA SCAPE CA APE STONE NE PRE R VIEW DAYS Jun u e 7-11th 8:30 AM to 4 PM Equipment Fac a ts or Proxi rox bid foor Bidding

1-866-511-2493

www.HessAu www ww ww w.HessA sAu uctioneers.net uct tioneers.net Email: Sales@H HessAuctioneers.com Auction Site: 1451 River e Rd. Marietta, P PA17547 A17547 PA P A Auctio i n Co. # A AY2025/AH1856/VB1159 Y2025/AH1856/VB1159

HBS Systems, a provider of web-based equipment dealership management solutions and rental software, announced an advanced telematics integration with Kubota. This telematics integration will strengthen the support NetView ECO provides to Kubota dealerships throughout North America, according to the companies. The benefits Kubota dealers can expect include: • Track unit location for dealer and customer-owned fleets. • Geo-fence job sites to receive notifications, minimize theft and watch for potential misuse. • Monitor unit meters and usage time for preventative maintenance, cost savings and rental contract accuracy. • Increase service efficiency and customer satisfaction by receiving fault codes that expedite work orders within NetView ECO. • Manage from one customizable screen through NetView ECO’s Service Connect, accessible from anywhere on any device. “We’re connecting dealers with customers and their machines with new technology to improve dealership productivity and reduce

“We’re connecting dealers with customers and their machines…” Chad Stone HBS Systems

machine downtime on the job-site or in the field which helps increase customer satisfaction,” said HBS Systems President and CEO Chad Stone. “Our development team is consistently providing first-to-market technology and benefits not found in the industry. The telematics integration with Kubota allows dealers to monitor machine health as well as receive alerts about any machine issues or potential problems. Dealers can proactively order parts or send a service technician right to the customer’s location and more.” 

Sales Auction Company Hosts 12th Annual

Spring Auction in Windsor Locks, Conn. T

Sam Sales, owner of Sales Auction Company, in the action truck with the Proxibid operator. Proxibid allows for virtual bidding at the live event. A large crowd follow the auction truck at the Sales Auction Company held May 1, 2021, in Windsor Locks, Conn.

S ccc{ O]PG <G ;G >{ <RO

Sales Auction Company is located at 55 King Spring Rd. in Windsor Locks, Conn.

ales Auction Company, family-owned and operated since 2009, invited attendees to the first onsite auction of the year. On April 30, 2021 a virtual timed event took place. In 2020, the virtual auction was the only option. This year, however, along with the virtual timed auction, was 2021’s first in-person auction held on Saturday, May 1 at the 8-acre facil-

ity at 55 King Spring Road in Windsor Locks, Conn. Virtual bidding for more than 2,000 pieces took place on April 30 at the timed auction via Proxibid and Equipmentfacts. These platforms allow for online bidding for those who were not able to attend in person. On May 1, large crowds gathsee SALES page 108

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 107

Page 108 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ONLINE AUCTION - COMMONWEALTH OF PENNSYLVANIA

PennDOT Annual Heavy Equipment Auction Dump/Plow Trucks, Loaders, Graders, Backhoes, Asphalt Equipment and More!

Crowds of Bidders Vie for Iron at Sales Auction Company’s First Onsite Sale of ‘21

The bid caller and truck for Sales Auction Company make their way through the inventory.

ORIGINATING YARDS ACROSS PENNSYLVANIA Auction closes online Tuesday, July 6th Check website for closing times and updates.

(L-R): Mark Swiatowiec Jr. with son, Mark III, of Cedar Ridge Construction in Newington, Conn.; John Vessel of JV3 Construction, Rocky Hill, Conn.; and Joe Viello of New England Blacktop, Glastonbury, Conn., stand in front of the 2020 Caterpillar 310 hydraulic excavator, one of the biggest ticket items of the weekend.

Bidders keep up with the auction while enjoying lunch in the pavilion.

SALES from page 106

www.AuctionsInternational.com

1.800.536.1401 YOUR ONLINE LIQUIDATION MARKETPLACE

Heavy Equipment Trucks Road Maintenance Utility Equipment Trailers Much More...

BIG or SMALL we sell it ALL!

ered on site to check out the wide variety of equipment, parts and vehicles available this year. More than 400 pieces were up for bid at the in-person auction. One of the highest tickets featured items was the 2020 Caterpillar 310 hydraulic excavator. According to Nate Cadenhead of Sales Auction Company, “Sam Sales (owner of the company) takes into consideration what people are looking for and what is desirable and he goes out and gets it. I think that is something huge to be said about Sales Auction Company. We cater to our people and the customer service is there.”  CEG

Ryan Geddes of Premiere Industries, Thomaston, Conn., with a 2004 John Deere 225CLC hydraulic excavator.

Virtual equipment showroom.

Steve Pchelka (L) of ASP Construction in West Springfield, Mass., and Dan Mikhaylichenko and son, William, of DVM Electric in Holyoke, Mass., stand in front of a 2000 John Deere 200LC hydraulic excavator.

Hassle free process. Accredited auctioneers. Hundreds of assets. Check us out today!

@auctionsinternationalinc

www.AuctionsInternational.com

Mark Swiatowiec and grandson Mark Swiatowiec III check out a Caterpillar 304E mini-excavator.

Nathan Cadenhead of Sales Auction Company with a 2020 Caterpillar M320 rubber-tire excavator.

Paul Furman of Suffield, Conn., in front of Caterpillar 310 excavator.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 109

FIND WHA HATT Y LOOKINGG FO Dail y Equipment Auc tions

UPCOMING HE AV Y EQUIPMENT AUCTIONS Live Vir tual Truck & Equipment Auc tion

2- Ring Online - Only Public Auc tio on

Power Line, Utilit y & Construc tion Auc tion

Trac tor & Equipment Auc tion

Ma y 27 | 10 : 0 0 a m E T

M a y 27 | 8 : 3 0 a m P T

En ds J un e 1 | 9:0 0 am C T

J u n e 2 | 10 : 0 0 a m C T

S o u t h e as te r n A u c t i on o Com p a ny

J S to u t A u c t i ons

J. J. K ane Auc tioneer s

E n l o w Tr a c tor A u c t i on o Inc

2- Day Absolute Equipment Auc tion

2- Ring Government Surplus Equipment Auc tion

Nor theast US Heav y Equipment Public Auc tion

June 4 | 9:0 0 am E T

June 5 | 9:0 0 am E T

J u n e 5 | 10 : 0 0 a m E T

'D\ 2LOȴHOG 7UXFN Construc tion Equipment Auc tion

P roT E A M A u c t i on

Ro y a l A u c t i o n G ro up

- H ΍ 0 D U W L Q $ X F W L R Q H H U V

June 8 & 9 | 9:0 0 am C T P e r m i an I n te r n a t i o n al E n e r g y S e r v i c e s

V iew all upcoming auc tions at Proxibid.com

BID ONLINE W ITH CONFIDENCE. Rely on a safe and eas y real-time bidding experience with the leaders in online auc tion technolog y.

Vast Inventory

License s d Auctioneers

Secure Platform

Best-In-Class Tech Support

s ale s @prox ibid.com • 877-5 05 -7770

Page 110 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SON INC PLAN AHEAD CALENDAR ....................................................................101 PLAINFIELD CT 6/9; PASSAIC NJ 6/10 ................................................103 MIDDLETOWN NY 6/11; MAHWAH NJ 6/13 ..........................................105 PARKERSBURG WV 6/18; ATL CITY NJ 06/19 ....................................107 ALEX PARIS CONTRACTING CO INC ............................................................23 ALL ISLAND EQUIPMENT CORP ......................................................................7 ALLIED CONSTRUCTION PRODUCTS ..........................................................89 ALTA EQUIPMENT COMPANY - NY ..................................................................9 AMERICAN SHORING ......................................................................................36 AMULET........................................................................................................90,93 AUCTIONS INTERNATIONAL INC ................................................................108 BANDIT INDUSTRIES INC ..........................................................................60,61 BARGAINS ........................................................................................................98 BEST LINE EQUIPMENT ..................................................................................12 BOMAG AMERICAS INC ..................................................................................44 CATERPILLAR INC ..........................................................................................51 CEG SCALE MODELS ......................................................................................46 CEG WANTED ..................................................................................................99 CHERRY VALLEY TRACTOR SALES ..............................................................16 COMPANY WRENCH........................................................................................35 CONSTRUCTION EQUIPMENT GUIDE ................................................20,58,86 DEACON EQUIPMENT CO INC ......................................................................32 DEMAG CRANES..............................................................................................50 DOOSAN PORTABLE POWER ........................................................................45 EAGER BEAVER TRAILERS ............................................................................83 EAGLE POWER & EQUIPMENT CORP ........................................................111 EESSCO ............................................................................................................65 ELLIOTT & FRANTZ INC ............................................................................35,71 EQUIPMENT CORP OF AMERICA ..................................................................22 ESCO CORP ....................................................................................................88 FAE USA INC ....................................................................................................71 FELLING TRAILERS ........................................................................................85 FIVE STAR EQUIPMENT INC ..........................................................................29 FLANGE LOCK..................................................................................................31 FOLEY INC ..........................................................................................................2 G T MID ATLANTIC LLC....................................................................................27 GEHL ................................................................................................................55 GROFF TRACTOR & EQUIPMENT INC ..........................................................16 GROVE WORLDWIDE ......................................................................................95 H O PENN MACHINERY CO INC ....................................................................15 HESS AUCTIONEERS LLC ONLINE AUCTION 6/11 ..........................................................................106 HITACHI CONSTRUCTION MACHINERY ..................................................96,97 HOFFMAN EQUIPMENT INC ..........................................................................25 HULTDINS MANUFACTURING ........................................................................90 HUNYADY AUCTION COMPANY BOONSBORO MD 6/3 ............................................................................102 HYUNDAI CONSTRUCTION EQUIPMENT ................................................40,41 IRON AUCTION GROUP PRINCETON WV 6/9; ACWORTH 6/30 ..................................................102

JESCO ................................................................................................................3 JJ SCHECKEL CORP........................................................................................39 JOHN DEERE....................................................................................................37 KLEEMANN ..................................................................................................74,75 KOBELCO CONSTRUCTION MACHINERY ..............................................52,53 KOMATSU AMERICA CORP ............................................................................49 KPI-JCI ..............................................................................................................78 KUBOTA EXCAVATOR ......................................................................................47 LABOUNTY MANUFACTURING INC................................................................91 M.T. KAYE STEEL LLC......................................................................................16 MAGELLAN CONSTRUCTION ........................................................................43 MESSICK’S........................................................................................................10 METSO OUTOTEC............................................................................................77 MILTON CAT......................................................................................................10 MONROE TRACTOR ........................................................................................66 MUNICIBID.COM ............................................................................................106 NATIONAL ATTACHMENTS ..............................................................................93 NEW MILLENNIUM RENTALS..........................................................................36 NEWARK EQUIPMENT SALES CORP ............................................................27 NORAM..............................................................................................................54 NORRIS SALES CO INC ....................................................................................6 PENNDOT COMM OF PA ONLINE AUCTION CLOSES 7/6 ............................................................108 PETERSON PACIFIC CORP ............................................................................64 PLASTERER EQUIPMENT CO INC ..................................................................5 POWERSCREEN MID-ATLANTIC ....................................................................72 POWERSCREEN NEW ENGLAND ..................................................................67 PROXIBID ........................................................................................................109 R J POIRIER HEAVY EQUIPMENT REP ........................................................32 RANSOME ATTACHMENTS ............................................................................94 RITCHIE BROS. AUCTIONEERS AUCTION CALENDAR ............................................................................112 ROBERT H FINKE & SONS INC ................................................................19,66 ROCK & RECYCLING EQUIPMENT LLC ........................................................63 SENNEBOGEN..................................................................................................77 SHORQUIP SUPPLY INC..................................................................................21 SILVI CONCRETE ............................................................................................27 STEPHENSON EQUIPMENT INC ....................................................................11 SUMMIT SUPPLY LLC ......................................................................................10 TEREX FUCHS..................................................................................................73 TOWMASTER INC. ......................................................................................80,81 TRACEY ROAD EQUIPMENT INC ..................................................................13 TRANSPORT EQUIPMENT SALES..................................................................33 TRI-STATE TRAILER SALES ............................................................................82 VOLVO CONSTRUCTION EQUIPMENT-NA ..............................................56,57 WESTCHESTER TRACTOR INC......................................................................12 WHITNEY & SON INC ......................................................................................70 WOODS CRW CORP........................................................................................17

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 26, 2021 • Page 111

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Introducing the New Case CX D Series Excavator

RECENT TRADES

2015 Kubota SVL75-2HWC, Stk# 36715, 1625 Hrs ...................... ...........................................................................Sale Price $42,500

2015 Case 580SN Loader Backhoe, Stk# 36509, 1501 Hrs ...... ...........................................................................Sale Price $71,250

2016 Case 580SN Loader Backhoe, Stk# 42499, 4653 hours, 4WD, HVAC Cab, Extendahoe ..........................Sale Price $39,500

2016 Case 621F XR, Stk# 37045, 875 Hrs ...................................... ........................................................................Sale Price $129,500

2015 Takeuchi TL12R Compact Track Loader, Stk# 35996, 897 Hours ..........................................................Sale Price $44,500

2018 Case 521G Wheel Loader, Stk# 42564, 718 hours, Heated Cab, 2.3 Yard Pin On Bucket ............................Sale Price $97,500

Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Ring-O-Matic Vacuum Excavation • Airman Portable Air Compressors • Paladin Attachments Planers, Brooms, Buckets • Trailking Trailers

Frank Beck

Pat DiCicco

Dean J. Leonetti

Mike Lutz

Tom Scott

Rich Verna

Jim Lutz

Brandon Jewell

Key Account Manager Montgomery County, PA

Key Account Manager, Philadelphia County, PA & Eastern Bucks County, PA

Philadelphia County, PA and Eastern Bucks County, PA

Montgomery County, PA and Western Bucks County, PA

New Castle County, DE, Cecil County, MD and Southern Chester County, PA

Chester County, PA and Delaware County, PA

Sales Manager

Toro Dingo Specialist

610/312-3995

215/870-4546

215/680-9203

215/783-1847

610/703-4261

302/530-9134

610/420-4770

215/699-5871 215/870-8567

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM

1416 Phoenixville Pike, Suite 200 West Chester, PA 19380 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM

Page 112 • May 26, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unreserved public equipment auctions

Flexible financing approvals

2 – 2020 Komatsu PC138US-11 – Low meter hours Northeast Regional Event

2015 John Deere 310SK 4x4 | Northeast Regional Event

2012 Caterpillar TL1055C 10000 Lb 4x4x4 Southeast Regional Event

2012 Mack GU713 Granite | Northeast Regional Event

1 of 4 - Caterpillar 621G | Southeast Regional Event

2012 Case 721F | Great Lakes Regional Event

2013 Caterpillar D6T XW | Great Plains Regional Event

Caterpillar 980G Series II | Great Plains Regional Event

2015 Caterpillar 336FL | Phoenix

63,660+ items in 90+ auctions including Phoenix, AZ Sacramento, CA Las Vegas, NV Houston, TX Great Plains Regional Event Northeast Regional Event

Jun 4 Jun 9 Jun 11 Jun 15–16 Jun 17 Jun 22–23

Great Lakes Regional Event Los Angeles, CA Truro, NS Southeast Regional Event Chehalis, WA Wasilla, AK

IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only. For the most up-to-date information visit rbauction.com/covid-19

Jun 24–25 Jun 25 Jun 28 Jun 29 Jun 29 Jul 17

Online bidding information

Financing & leasing available

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com

Auctioneer Chad M. Johnson # 17668, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889, Auction Company Bond #0470724, Auctioneer Patrick J. Hicks Bond # 0470727, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, Auctioneer Chad M. Johnson # 17668, Motor Vehicle Dealer License #DLR25867, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auctioneer James L. Valentine #5623, Auctioneer Kevin L. Perry # 2763, Auction Company License #AY00208L, Auction Firm # 2008000166, Auctioneer Kevin L. Perry # 2002000227, Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Auction Company License # 001348, Auctioneer Frederick R. Vilsmeier # AUNR003087, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Used Motor Vehicle Dealer License #2647