Skip to main content

Northeast 9, April 28, 2021

Page 1

Published Nationally Northeast Edition

® April 28 2021 Vol. LXIII • No. 9

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

SEI Unveils ‘Raised on Blacktop’ Paver…12

Tech School Takes Delivery of Volvo Loader…20

Crews took the crane apart in pieces out of the lock chamber, simplifying things.

By Mary Yamin-Garone CEG CORRESPONDENT

Creativity Fuels Bauer Built’s Growth…87

Table of Contents ................4 Aggregate and Recycling Section ........59-78

As the saying goes, “It takes a village.” Recently, DA Collins and Link-Belt Cranes joined forces to pick Collins’ 200-ton Link-Belt crawler crane out of the Lock 7 chamber in

Business Calendar ..........109 Advertisers Index ............110

see CANAL page 46

Industry Contends With Cost, Supply, Labor Issues Amid Construction Boom Gains By Lucy Perry

Attachment & Parts ....79-86

Auction Section ......102-109

there’s a certain increase in elevation. So, a boat would travel into the lock chamber, which has lock gates up and down stream. Once you go inside the lock chamber, the water elevation can be raised and will get the boats to the upstream side of the dam or to the next highest point along

Challenges Persist as Construction Ramps Up CEG CORRESPONDENT

Truck & Trailer Section 87-95

Niskayuna, N.Y. According to David Perry, DA Collins project manager for the construction site, “This particular project was located at Lock E7 along the Erie Canal. The canal stretches from Albany to Buffalo and then from Albany to Lake Champlain. To get from Albany to Buffalo,

The good news: Construction project bottlenecks are loosening, work is ramping up and the industry can start to breathe a general sigh of relief. The bad news: The cost of construction materials is going through the roof. A spring survey of civil contractors found that nearly three quarters of respondents have felt the impact

of fluctuations in material costs on their projects in the past six months. Even more (76 percent) of those contractors expect cost increases in the next half year, according to the survey by Dodge Data in the latest issue of Civil Quarterly. Dodge chalks up the challenges to the pandemic, the reduction in material backlogs over time and disruptions in material production and distribution. see COSTS page 52


Page 2 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

LIGHTEN YOUR LOAD Sell your machines you aren't using for cash! Call us to hear our competitive offer on your machine today. We are looking for the following machines to add to our inventory: • • • • • • • •

Cat backhoe loaders: Models 416 - 446 original and series B, C, D, & E Cat track skid steers 239-299 B, C, & D series Cat mini excavators: Models 301.4 - 308 original and series C, D, & E Cat excavators: Model 315 original, C, & D series Cat wheel loaders: 924 - 962 G & H series Cat compact wheel loaders: 903-908 H & M series Cat dirt rollers: CS34 – CS66 Cat dozers D3-D5 G, H, & M series

If you own one of these machines, please email UsedEquipment@foleyinc.com or call our Used Equipment Sales Office now for purchase price:

732-417-7040 Have a machine not on this list? Ask us about our consignment program and learn how we leverage Foley’s sales, marketing, and financial departments to sell your machine fast!


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 3

IT’S THE DOWN-T W O-EARTH APPRO A ACH. Yo ou’ll find everything you n need at JESCO - the equipment, the parts, the service and the people who can answer yourr questions and make things work.

Integrity. Commitment. Honnesty. Expertise. JESCO strives to bee everything you’re looking for in a company. Yo ou can depend on us. Whether yoour job is to construct, d demolish, li h pave or grade, d JEESCO delivers d li wha h t you need. d

www.jesco.us

800-241-7070


Page 4 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

®

12

INFRASTRUCTURE BILL: IS IT ENOUGH? WHAT DO WE REALLY NEED?

Transportation Secretary Pete Buttigieg spoke to a key congressional committee on March 25 and told lawmakers “they have the best chance in any of our lifetimes to make a generational investment.”

12

STEPHENSON EQUIPMENT UNVEILS ‘RAISED ON BLACKTOP’ PAVER

26

DESIGN UNDER WAY FOR NEW UMA GEOTECHNICAL HEADQUARTERS

Stephenson Equipment Inc. (SEI) held a “Raised on Blacktop” paver unveiling event and a mini paving service and maintenance seminar April 9, 2021, in Harrisburg, Pa.

UMA Geotechnical Construction, a contractor serving the Mid-Atlantic region, has announced that construction will soon be under way on its new headquarters in Colfax, N.C.

Following the discouraging news that it is around the age of 10 at which girls stop considering engineering as a potential career path, Volvo Construction Equipment (Volvo CE) saw it as an opportunity to redress the balance.

Yanmar, this year, celebrates the 50th anniversary of the YFW500D, the world’s first tracked carrier equipped with a Yanmar diesel engine. Created in 1971, the YFW500D was the world’s first tracked carrier.

The Lehigh Career & Technical Institute (LCTI) in Schnecksville, Pa., evaluated its equipment options and decided to purchase a Volvo L90H wheel loader from Hoffman Equipment.

Located next door to the company’s headquarters, the Takeuchi Training Center will now be the site of sales and technical instruction for the company’s salespeople, dealer principals, dealer technicians and corporate dealer trainers.

Association of Equipment Manufacturers (AEM) president Dennis Slater issued a statement in support of a legislative package introduced by U.S. Senator Gary Peters (D-Mich.).

Doosan Infracore North America LLC announced its top-performing dealers of 2020. The top 10 dealers are among more than 160 Doosan equipment dealers in North America.

A new sports and entertainment facility, specifically designed to accommodate a minor-league baseball team, will soon begin construction in Hagerstown, Md., after the state’s General Assembly approved a bill April 12 to fund the project.

Students should be able to walk through the doors and into the light-filled, high-tech new campus of New Jersey City University (NJCU) in Oceanport beginning this July.

Argent Ventures and Canadian-based H&H Real Estate Investments Trust joint venture is in the preliminary stages of transforming 18 acres on the Hudson River waterfront of Jersey City, N.J., into “The Cove,” a $3 billion mixed-use campus.

When Vaughn Bauer began designing and manufacturing folding planters for local agriculture in Paton, Iowa, he was simply improving upon the design and utility of machinery used commonly by farmers in the area.

16

VOLVO SETS OUT TO INSPIRE TOMORROW’S FEMALE ENGINEERS

20

TECH SCHOOL BUYS VOLVO LOADER FROM HOFFMAN EQUIPMENT

24

AEM HAILS SEN. PETERS’ LEADERSHIP ON AMERICAN MANUFACTURING

24

MARYLAND APPROVES NEW $59.5M HAGERSTOWN BASEBALL PARK

26

DEVELOPERS TO CREATE $3B MIXED-USE PROJECT IN JERSEY CITY

Founder, Publisher & CEO Northeast Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

LinkedIn

Facebook

30

Twitter

30

34

36

44

87

YANMAR CELEBRATES 50TH ANNIVERSARY OF TRACKED CARRIER

TAKEUCHI-US OFFICIALLY OPENS NEW TRAINING CENTER DOOSAN ANNOUNCES ITS TOP 10 EQUIPMENT DEALERS OF 2020

HIGH-TECH N.J. COLLEGE CAMPUS NEARS FINISH LINE IN JULY CREATIVE DESIGN FUELS BAUER BUILT’S FUTURE PLANS

AGGREGATE PRODUCTION & RECYCLING SECTION

59 64 70

BAGELA TURNS MILLINGS INTO MONEY FOR M.J.W. SERVICES SANDVIK CELEBRATES MYFLEET 1,000TH UNIT MILESTONE

METSO OUTOTEC LAUNCHES ONLINE MONITORING TECHNOLOGY

DEPARTMENTS

102 COMING AUCTIONS 109 BUSINESS CALENDAR

EQUIPMENT

79 82 92 96 96

ROAD WIDENER Vibratory Roller Attachment LABOUNTY Mobile Hydraulic Pulverizers

DAKOTA BODIES Gen II Service Body PRINOTH T14R Crawler Carrier

KOMATSU PC88MR-11 Excavator

Edwin M. McKeon Jr.

Kent Hogeboom

Ed Bryden

Joshua Phillips

• New Jersey • Eastern Pennsylvania • Northern Maryland • Delaware

• New York • New England • Northern Pennsylvania

• West Virginia • Western Pennsylvania

• National • Central Pennsylvania

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

20

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout • New Hampshire • Vermont • Connecticut • Rhode Island • New York • New Jersey • Delaware • Maine • Pennsylvania • Maryland/D.C. • Virginia • West Virginia • Massachusetts

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

8

IN THIS ISSUE

NORTHEAST EDITION

YouTube

215/885-2900 215/760-6641 tmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Northeast Edition (ISSN 1058-787X) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from

Cell e-mail

315/725-5726 jphillips@cegltd.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 5

A SHIN NING EX AMPL M E OF CUSTOMER INPUT. Our new 324E Skkid Steer packs customer-in nspired features and perfo ormance into an agile, XOWUD HIƟFLHQW FR RPSDFW GHVLJQ It features eexceptional reach at truck bbeds, connect-underpressure auxiliaryy couplers, and your choice of controls including our exxclusive switchable electrohydraulic y (EH) ( option p that lets you y select amongg different contro ol ppatterns, at anyy time, at the push of a button. To To learn l more, see your dealer or visit our website.

3/$67(5(5 (48,30(17 &2 ,1&

www.plasterer.com

:( 2))(5 )/(;,%/( 5(17$/ 385&+$6( 7(506 DYDLODEOH WKURXJK -RKQ 'HHUH )LQDQFLDO

."$)* /&4 "7"* -"#-& '03 %"* : 8&&,: "/% .0/5): 3&/5 "-4 "%54 #"$,)0&4 $3"8-&3 %0;&34 $3"8-&3 0"%&34 &9$"7"5034 0/( 3&"$) &9$"7"5034 .* /* &9$"7"5034 4,* % 45&&34 8)&&- 0"%&34 "/% .65* 1-& "55 "$).&/54

/(%$121 3$

( &80%(5/$1' 67

%(7+/(+(0 3$

6(//(569,//( 3$ 67$7( 5'

3/$67(5(5 (48,30(17 &2 ,1& ZZZ SODVWHUHU FRP

672.( 3$5. 5'

/(:,6%(55< 3$ /2:7+(5 5'


Page 6 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 7

631/643-2605 www.allislandequipment.com follow us on Instagram

Serving Nassau, Suffolk and the Five Boroughs

STILL FAMILY OWNED & OPERATED SINCE 1970

Get A Load Of These New Products Offered By Gehl VT320 VERTICAL TRACK LOADER

Height to Hinge Pin - Fully Raised (mm): 129.2" (3251) Rated Operating Capacity (kg): 3,200 lbs. (1452) Power (kW): Net 114 hp (85) The Gehl V320 track loader features the IdealTrax™ Automatic Track Tensioning System, horsepower management and customized operation.

V420 VERTICAL-LIFT SKID LOADER

Height to Hinge Pin - Fully Raised (mm): 144" (3653) Rated Operating Capacity (kg): 4,200 lbs. (1905) Power (kW): Gross 120.7 hp (90) The Gehl V420 skid loader is a shining example of Gehl’s superior innovation and well thought-out product development.

LIMITED TIME OFFER!

R260 SKID LOADER

0% APR for 48 Months PLUS 2 Year, 2000 hour Total Machine Warranty

The Gehl R260 Skid Loader has spacious operator stations with plenty of adjustability and enhanced comfort features that users have come to expect from Gehl. Height to Hinge Pin Fully Raised (mm): 123" (3124) Rated Operating Capacity (kg): 2,600 lbs. (1179) Gross Power (kW): 72 hp (53.7)

RT165 COMPACT TRACK LOADER

Rated Operating Capacity at 35% Tipping Load (kg): 1,650 lbs. (748) Net Power (kW): 68.4 hp (51) Lift Height (mm): 119.6" (3038) The Gehl RT165 Compact Track Loader is taking performance to the next level.

®

Lowboy


Page 8 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Infrastructure Bill: Is it Enough? What Do We Really Need? By Chuck MacDonald CEG CORRESPONDENT

President Biden announced in April a $2 trillion plan to transform the economy with special emphasis on jobs, infrastructure and green energy. The transportation piece of the proposal would direct $621 billion to roads, bridges, public transportation, airports and electric vehicles. Prior to the announcement, Transportation Secretary Pete Buttigieg spoke to a key congressional committee on March 25 and told lawmakers “they have the best chance in any of our lifetimes to make a generational investment.” The House Transportation Committee hearing was Buttigieg’s first appearance since his confirmation. “Wise transportation investments are key to making the American Dream accessible for all, leading our global competitors in innovation, getting people and goods to where they need to be creating good jobs — jobs that are union or pay prevailing wages — and tackling our climate crisis,” Buttigieg said. The infrastructure proposal could include approximately $400 billion to combat climate change. The administration is considering tax increases to fund the program. Buttigieg didn’t endorse any one approach but said lawmakers had the option to rely on fees on drivers, such as the gas tax, other general tax revenue or borrowing. “I’ve heard loud and clear from members of Congress, Republican and Democratic, that an infrastructure proposal needs to have at least a partial funding source and I know that’s a challenging conversation,” he said. Buttigieg has made appearances to help promote the administration’s $1.9 trillion stimulus package. The kind of infrastructure package will need congressional support to make it happen. Buttigieg has endorsed improving transit access as well. “I believe by investing in transit, transit-oriented development, and for that matter, rural main streets, in the right balance, we can support people getting to where they need to be.” Advancing the package through the Senate will likely require the support of several Republicans. Detractors of the plan are asking the question, “How much of the bill can really be called infrastructure?” Fortune magazine’s Jeff Colvin observed, “Infrastructure, as many people think of it, accounts for only $157 billion, or 7 percent, of the plan’s estimated cost.” He continued, “The definition of infrastructure can reasonably be expanded to include upgrading wastewater and drink-

ing water systems, expanding high-speed broadband Internet service to 100 percent of the nation, modernizing the electric grid and improving infrastructure resilience. That brings the total to $518 billion, or 24 percent of the plan’s total cost.”

“I believe by investing in transit, transit-oriented development, and for that matter, rural main streets, in the right balance, we can support people getting to where they need to be.”

federal gas tax currently stands at 18.4 cents per gallon of gasoline and 24.4 cents per gallon of diesel. The tax was last raised in October 1993. The tax was not indexed for inflation, which has increased 77 percent since then. Congress has shown little inclination to raise that amount. The taxes have fallen far short of what infrastructure needs exist. Even more stress on the infrastructure fund has been created with the advent of more electric vehicles. Clearly, for the future, the government will be collecting less in gas taxes.

One Option: Tolls Pay-as-you-go options exist and are growing. This includes tolls, which already exist in most states. Other options include charging the motorists by the amount they drive. Essentially, this system follows the reasoning that those who drive more Pete Buttigieg miles should pay more for the use of Transportation Secretary the roads. The idea of an EZ pass for all roads makes sense, and the technoloWhat Is Our Infrastructure? gy is advancing to make it possible on many President Biden has referred to our infra- roads. However, for now, there are simply structure as “crumbling.” Is it really crum- too many cars, too many roads and the bling, though? billing and collections would be a nightAmerican infrastructure could be mare. described as: One method of making the necessary • 2.7 million mi. of paved roads; taxes more palatable to both Congress and • 615,000 bridges; Americans is a word that had fallen out of • 140,000 mi. of freight railroad; favor — “earmarks.” Previous highway bills • 500 commercial airports; and had listed specific highway and infrastruc• 300 ports on the coasts, Great ture projects in each state, giving Lakes and inland waterways. Congressmen of both parties an easy way to The American Society of Civil Engineers point to money and jobs brought back to 2021 report card gives the United States their constituents. The projects were listed infrastructure a C-. That was its best grade in clearly for all to see. 20 years. The report states five category John Hudak, of the Brookings Institute, grades — aviation, drinking water, energy, wrote about it in an article entitled, inland waterways and ports — went up, “Earmarks are back, and Americans should while just one category — bridges — went be glad.” down relative to ASCFE’s 2017 report card. “Earmarks, they serve a real purpose,” The impartial Congressional Research wrote Hudak. “They allow legislators — Service in its May 2020 report said that “the who well understand the needs of their disnumber of bridges in poor condition has tricts/states — to target funds for important dropped significantly over the past 20 years” projects that can solve policy problems and and that “a relatively modest increase in create jobs. Second, while abuses happen, spending” between now and 2040 could the vast majority of earmarks were meant to solve the problem. respond to constituents’ concerns and needs. A 2019 study by the University of Third, earmarks have always composed a Pennsylvania and Brown University con- miniscule portion of the discretionary budgfirmed that “over the past generation, the et, typically less than one percent, and fall condition of the interstate highway network within a chairman’s mark — the top-line improved consistently,” according to gov- number set for an appropriations bill’s cost. ernment data, seen as “its extent increased Finally, earmarking is not a Democratic promodestly and traffic about doubled.” posal. Democrats and Republicans have Almost everyone agrees that improving endorsed their use.” our infrastructure is going to be expensive. Biden proposes raising corporate taxes. Nonprofits representing the road building Others lean on increasing the gas tax. The and construction industries have voiced the

thoughts of their members. “National Asphalt Pavement Association [NAPA] and its members are committed to building and maintaining our infrastructure with the utmost goal of recycling, sustainability and concern for our environment and resources,” said NAPA Chairman James (Jay) Winford Jr., president of Prairie Contractors Inc., Opelousas, La. Looking at Infrastructure Needs American Road and Transportation Builders Association (ARTBA) formed a blue-ribbon committee, composed of government and private industry, to take a deep dive into the needs of America’s infrastructure. The report, published in 2019, reveals strong priorities for upgrading infrastructure. Many of their points are often overlooked but would be essential in using funds efficiently for the benefit of the public as well as the companies doing the work. The report highlights the modernization of the 68,000-mi. National Highway Freight Network (NHFN) designated by Congress in 2015 as a top priority. The report calls the NHFN “America’s Economic Expressway.” This expressway includes the interstate highway system and its critical urban and rural connectors to the nation’s airports, rail hubs, major ports, inland waterways and pipelines. “Of all transportation infrastructure needs we have as a nation, improving the safe and efficient movement of goods is the key to increasing U.S. productivity, lowering the cost of things we produce and purchase, improving our environment and giving us the competitive edge in world markets.” The report emphasized the importance of supporting the infrastructure. It notes that approximately 70 percent of all freight is carried on interstate highways. This number is increasing every year with the increased shopping online and growing domestic energy industry. Future expansions make infrastructure support vial. The report continued, “Federal government forecasts say that by 2035 there will be 70 million more Americans and that truck shipments will have to grow by 40 percent to serve an expanding population and economy. Most Americans know our transportation network is not ready for that.” The report also looks at future issues like autonomous vehicles. “Strategic and targeted investments in the NHFN will help prepare our interstates for autonomous trucks, cars and communications platforms that will use technology to increase safety, cut traffic congestion, save fuel and improve air quality. Every state and every American would benefit such investments, no matter where they live.”  CEG


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 9

arrre e now

Allta Equ uipmentt Company pany ALTA EQUIPMENT C AL COMP OMP PANY ANY IS ONE OF THE BIGGEST T,, F FASTEST AST TEST GROWING E EQUIPMENT DEALERS RS S in the United States. s Choose from s. fr a greaterr variety of quality e equipment manufacturers, rest assured with mor ore experienced and knowledgeable s service techs, and enjoy superior parts availability ility with a support network that rresults in m e uptime for your business. W mor We e look forwarrd to growing with you and being there for y every step of the way. WE ARE AL you LT TA EQUIPMENT QUIPMENT COMP PANY ANY Y. S SYRACUSE

ALBANY

BATAV TAV IA

55985 Court St. Road S Syracuse, NY 13206 8 833-NY -ALLTTA-1 8 833-692-5821

17 Northway Lane Latham, NY 12110 833-NY-ALLTTA-2 833-692-5822

4554 West W t Saile S il Drive Di Batavia, NY 140200 833-NY-ALLTTA-3 833-692-5823

Call us at 833-Go2-ALT LTA or visit us online at AltaEquipNY Y..com


Page 10 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

0

% APR FIN NAN NCING FOR UP TO

36 6 MONTHS PL LUS

ALLENTOWN

HARRISBURG

SHIPPENSBURG

STA ATTE COLLEGE

TOWANDA

UNIONTOWN

WEST CHESTER

KEYPORTT,, NJ

1315 Hausman Rd.

6700 Allentown Blvd.

8001 Possum Hollow Rd.

140 Hawbaker Industrial Dr.

183 Tomahaaw wk Rd.

2266 University Dr.

515 South Bolmar St.

275 Clark St.

1-800-679-BEST (2378 ) • BestLine.com • BestLineDoosan.com • Find Us On : Limited time offer. Av Available at participating and eligible dealers only. Offers may va vary by product type, series, model and selecctt units in dealer inventory. Offers available on new equipment in US and Canada only. Some ressttrictions apply. Length of contracctt may vary. Prior purchases not eligible unless notated in program information. See dealer for deettails. Financing provided on approval of credit by authorized Doosan Infracore North America, LLC finance providers to w weell-qualified buyers. Administrative fees may apply. Offer not available to government accounts, national accounts and municipal /utility bid customers. Doosan Infracore North America, LLC reserves the right to exxttend or discontinue any of these programs at any time without prior notice. See Best Line for complete deettails. Photos may not rep e resent actual units. Dealer not responsible for typographical errors. 2021 Impacctt Advertising

Westchester Tractor, Inc. 60 International Blvd • Brewster, NY 10509

845/278-7766 Fax: 845/278-4431 E-mail: dan@wtractor.com

Now Serv ing All of Connectic ut

LATE MODEL EQUIPMENT EXCAVATORS:

SCREENERS:

2015 DOOSAN DX350LC-5, FULL CAB, QUICK COUPLER, 738 HOURS, 2 WAY PIPING ..........$225,000 2015 KOBELCO SK85SR, 2572 HRS, 36” BKT, HYD THUMB, KUBOTA STYLE COUPLER, PATTERN CHANGER, RUBBER TRACKS ....................................................................................................$79,995 2005 KOBELCO SK210LC, CAB, HVAC, HYD THUMB JUST SERVICED, HOURS UNKNOWN ....$59,995 2017 NEW HOLLAND E30B, CAB W/HEAT/AC, 300 HOURS, MANUAL COUPLER, 4 WAY BLADE, 24” BKT & 48” GRADING BUCKET....................................................................................................$41,995

2018 VIBROSCREEN SCM40C BOX SCREENER W/CONVEYOR, 123 HOURS ..........................$129,000 2018 VIBROSCREEN SCM40 BOX SCREENER, 200 HRS, NO DPF, NO DEF................................$54,995 NEW VIBROSCREEN SCM75C BOX SCREEN W/CONVEYOR, TIER 3 ENGINE ..........................$175,000 NEW VIBROSCREEN SCM115T TROMMEL, NO DPF, NO DEF ....................................................$150,000 2018 VIBROSCREEN SCM115T TROMMEL, 400 HOURS, NO DPF, NO DEF ..............................$123,500

TRACTORS:

STUMP GRINDERS:

2014 KIOTI NX4510C TLB, 320 HRS, CAB HVAC, LOADER, BACKHOE, AG TIRES......................$37,500 2014 BANDIT 2900 STUMP GRINDER, TRACK UNIT, REMOTE CONTROL, NEW CUTTER WHEEL, CAT 2014 KUBOTA M108 “OVER THE RAIL” BOOM MOWER, CAB, 4WD, 2150 HRS, ROTARY HEAD..$79,995 97HP DIESEL ENGINE, HOURS UNKNOWN..................................................................................SOLD 2014 BANDIT 2250 STUMP GRINDER, 468 HOURS, KOHLER 27HP GAS ENGINE, SELF-PROPELLED .. TRACTOR LOADERS: ......................................................................................................................................................SOLD 2016 NEW HOLLAND BOOMER 46D W/LOADER, 4WD, CAB, 625 HRS ........................................SOLD

2004 KOMATSU PC200LC-6LE

MISCELLANEOUS:

SKID STEER LOADERS:

2006 NEW HOLLAND L185, 1480 HRS, FULL CAB, NO A/C, PILOT CONTROLS, HYD CPLR ....$21,995 2003 BOBCAT 5600 TOOLCAT, 3025 HRS, JUST SERVICED, CAB HVAC, HYD DUMP, INCLUDES TOW 2017 NEW HOLLAND L220, 130 HRS, CAB, HVAC, 2 SPEED, PILOT CONTROLS ......................$39,500 HITCH PLATE (NO BUCKET INCLUDED) ....................................................................................$29,995 2017 BOMAG BW213D-4, CAB W/HEAT/AC, VIBRATORY ROLLER, 84” DRUM ROLLER, 64 HOURS .... ................................................................................................................................................$106,800 TLB’S: 2014 DOOSAN DXB260 BREAKER, 8500 LBS, FOR DX350, HAMMER TOP FOR PIN GRABBER............ 1999 NEW HOLLAND 675E, 6438 HRS, CAB W/HEAT, EXTENDAHOE, 4WD, 6X1 LOADER BUCKET, MACHINE HAS SOME LEAKING CYLINDERS................................................................................SOLD ..................................................................................................................................................$35,000 See dealer for financing details. CNH Capital America LLC standard terms and conditions apply. Subject to customer credit qualifications. CNH Capital America LLC reserves the right to cancel any program without notice.

VISIT OUR WEB SITE

AT WWW.WTRACTOR.COM

2018 VIBROSCREEN SCM40


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 11

ROGERS 60 TON 4-AXLE DROPSIDE

135 Lincoln Avenue • Prospect Park, PA (Philadelphia) • 19076 John Conner - 800-220-4033 • 610-534-0700 796 Unionville Road • Prospect, PA (Butler) • 16052 Ryan Alles - 888-806-0643 • 724-636-9986

IN STOCK! 8’6” X 27’ DECK

Air Lift 3rd & 4th Axles

New Rogers 55 ton, No-Foot Neck, 25' deck, Deep Well Stick Pocket Reinforced wheelcovers, 275's on Aluminum, Air lift 3rd, Air lift flip 4th Night Lights, Strobes, Black Paint.. ..............IN STOCK!

Rogers 55 ton CobraNeck, 26' deck, 18" ride ht, Bucket Pocket, Depressed Crossmembers, Air lift 3rd, Air Lift Flip 4th. Reinforced Wheel covers, Night Lights, Strobes, 275's, Aluminum Outers. Black Paint. .. ..............IN STOCK!

Rogers 35 ton, Gentle Riser, 24' deck, 275's Aluminum, Night Lights & Strobes. Rogers Red and Black Paint ........IN STOCK!

Rogers CY50GR, 50 Ton Gentle Riser, Paver Ramps, 275’s, Aluminum Wheels, Air Lift 3rd, Night Lights, Strobes, Black and Red Paint .. ................IN STOCK!

Rogers Custom 50 Ton No-Foot, 24' deck, pin-on flip 3rd axle, air lift, 275's, Aluminum .................... ..............IN STOCK!

Rogers Custom PT35L, 35 ton Rear Loader, Air Ride, Air Ramps, 235's, Aluminum, Red or Black Paint................ ..............IN STOCK!

Rogers TAG25XXL, 25 Ton Capacity, Premium Specs, Superior Quality, 235’s Aluminum, 7-Year Warranty, Black or Red Paint, 22' and 24' deck, 8’ Air Ramps.. ................IN STOCK!

Felling 25 Ton, Air Tilt, Air Ramps, 24’ Deck + 6’ Tail ...... ................IN STOCK!

ASK ME ABOUT AIR RAMPS!


Page 12 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Stephenson Equipment Unveils ‘Raised on Blacktop’ Paver

S

Charlie Walsh, executive vice president, SEI, addresses attendees prior to the big unveiling of LeeBoy’s Special Edition “Raised on Blacktop” 8520B heavy-commercial asphalt paver.

Bryce Davis, director of sales, LeeBoy, gets ready to unveil the LeeBoy Special Edition “Raised on Blacktop” 8520B paver.

Matt Stanley, construction foreman of American Pavement Specialists, Danbury, Conn., created “Raised on Blacktop” as a way to tap into the pride and passion of others like him.

tephenson Equipment Inc. (SEI) held a “Raised on Blacktop” paver unveiling event and a mini paving service and maintenance seminar April 9, 2021, in Harrisburg, Pa. Local paving contractors, townships and city highway department crews were on hand to see the official unveiling of LeeBoy’s Special Edition “Raised on Blacktop” 8520B heavy-commercial asphalt paver. Matt Stanley, construction foreman of American Pavement Specialists, Danbury, Conn., created “Raised on (L-R): Bill Stanley, owner, American Pavement Specialists; Josh Stanley, American Pavement Blacktop” as a way to tap into the pride Specialists; Matt Stanley, American Pavement Specialists and “Raised on Blacktop”; Charlie Walsh, and passion of others like him in the executive vice president, SEI; Bryce Davis, director of sales, LeeBoy; Dennis Heller, SEI; Mike Walsh; paving industry. Fueled by Charlie Jim Harkins, LeeBoy; Bob Criste, president and CEO, SEI; Scott Schatz, territory manager, SEI; and Ronnie Hoffman, heavy equipWalsh, Stephenson Equipment’s ment service manager, SEI. executive vice president and vice president of LeeBoy’s dealer council; Jim Harkins of LeeBoy; • red operators’ seats embroiand Matt Stanley’s “Raised On dered with the “Raised on Blacktop” movement, the special Blacktop” logo; edition “Raised on Blacktop” • stylized “Raised on Blacktop” paver from LeeBoy was built Special Edition hopper decal; and the first one was recently • carbon-fiber embellished wing delivered to Stephenson decal with a larger American flag Equipment. decal; and As with any true movement, • engraved serialized badge. Raised on Blacktop has no shortAfter a complimentary lunch, age of merchandise to help pro- The big unveiling begins. Ronnie Hoffman, heavy equipmote its cause. The online store ment service manager, SEI, led a features shirts, hats, decals, kids clothing and include: mini paving service and maintenance seminar • a custom LED lighting package; more. where the attendees learned tips to help every• a custom straight edge level fitted to store on day operations and keep their pavers working at LeeBoy engineers, working with the Stanleys of American Pavement Specialists, have added a the screed their best and laying smooth asphalt mats with • a weather-proof ticket/phone box; few well thought out bells and whistles to the ease. • various well-placed easy access tool tray and standard 8520B heavy-commercial asphalt For more information, visit paver. Those additions not only make a paving shovel/rake carriers on the walk board and each https://stephensonequipment.com/ and professionals job a bit easier, but also pay hom- side of the paver; www.leeboy.com/RaisedOnBlacktop8520/. • an exclusive gray paint scheme; age to the “Raised on Blacktop” crowd. Features  CEG

SEI provided lunch for its attendees of the “Raised on Blacktop” unveiling and minipaving seminar April 9, 2021, in Harrisburg, Pa.

Ronnie Hoffman, heavy equipment service manager of SEI, leads a Special Edition “Raised on Blacktop” 8520B heavy-commercial asphalt paver walk-around for highway department members of Exeter, Washington township, city of York, West Manchester and Upper Leacock.

Local contractors and town and city highway department crews were on hand to see the official unveiling of LeeBoy’s Special Edition “Raised on Blacktop” 8520B heavy-commercial asphalt paver.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 13

For more information contact: Skip Letcher or Jesse Weller used@traceyroad.com | (800)872-2390 TRACEYROAD.COM – EVERYTHING YOU NEED TO GET THE JOB DONE SALE PRICE: $52,900

LOCATION: BINGHAMTON, NY 2006 SAKAI SV505D • INV#131242CEG • 2,720 HOURS SALE PRICE: $81,500

LOCATION: SYRACUSE, NY 2012 KOBELCO SK210LC-9 • INV#151312CEG • 3,042 HOURS SALE PRICE: $104,320

LOCATION: SYRACUSE, NY • 2014 LIEBHERR L528 • INV#80442CEG • 1,064 HOURS

SALE PRICE: $49,990

LOCATION: SYRACUSE, NY 2019 CARLTON 2015C CHIPPER • INV#150565CEG • 41 HOURS SALE PRICE: $105,000

LOCATION: SYRACUSE, NY 2016 CARLSON CP100 • INV#148981CEG • 2,385 HOURS SALE PRICE: $339,000

LOCATION: SYRACUSE, NY 2015 RUBBLE MASTER RM100GO! • INV#83484CEG • 1,609 HOURS

SALE PRICE: $72,900

LOCATION: SYRACUSE, NY 2012 KAWASAKI 65TMV-2 • INV#146698CEG • 5,300 HOURS

SALE PRICE: $19,900

LOCATION: SYRACUSE, NY • 2021 FELLING FT-20-2T • INV#146779CEG • 23’ TILT DECK

SALE PRICE: $178,320

LOCATION: KIRKWOOD, NY 2018 HYUNDAI HL965 • INV#111970CEG • 1,600 HOURS

SALE PRICE: $37,900

LOCATION: SYRACUSE, NY 2017 NEW HOLLAND C232 • INV#150605CEG • 1,541 HOURS

SALE PRICE: $172,900

LOCATION: SYRACUSE, NY 2014 BELL B30E HAUL TRUCK • INV#79245CEG • 3,294 HOURS

SALE PRICE: $205,920

LOCATION: SYRACUSE, NY 2019 HYUNDAI HX300LR • INV#124010CEG • 800 HOURS

ALBANY BINGHAMTON QUEENSBURY ROCHESTER SYRACUSE UTICA WATERTOWN

TRACEY TRUCK PARTS HAS YOU COVERED, NO MATTER WHAT YOU’RE LOOKING FOR.


Page 14 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053 2019 Case 650M WT, stk # EQ0035853,

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053 2016 Case 1121F, stk # EQ0041202, Cab

Cab w/Heat & AC, Deluxe Air Seat, 10' P.A.T. 6-Way Blade, 24" Max Life U/C, Sweeps & Rear Screen, CWT., Draw Bar, Premier Warranty, 452 Hrs ..........................$92,500

w/Heat & AC, Ride Control, 4F/3R Powershift, 26Rx25 Michelin XHA2 6.1 yd3 Bucket, Op. Wt 59,192 Lb., 8,030. Hrs ...... ....................................................$142,500

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

ab Se H

pa la Es

ño l

Se H abl a Es pa ño

l

2005 CAT 966G-II, STK# 21E012

2008 CAT 320DL, STK# 20E058

EXCAVATORS

19E071 – 2015 DOOSAN DL250-5, EROPS W/AC, HYD QC, GP BKT, RIDE CONTROL, HEATED MIRRORS, 20.5R 25 TIRES ..........$89,000 21E021 – 2004 CAT 950G-II, EROPS W/AC, HYD QC, AUX HYDRAULICS, GP BUCKET, RIDE CONTROL, 23.5X25 TIRES $64,000 21E026 – 1997 CAT 950F-II, EROPS W/AC, HYD QC, AUX HYDRAULICS, SIDE DUMP BUCKET, 23.5X25 TIRES ............$38,000 21E025 – 2008 CAT 950H, EROPS W/AC, SCALE, GP BUCKET, AUXILIARY HYDRAULICS, RIDE CONTROL, 23.5X25 TIRES ........$72,000 21E023 – 2008 CAT 966H, EROPS W/AC, GP BUCKET, RIDE CONTROL, 26.5R25 TIRES ............................................................$94,000

20E058 – 2008 CAT 320DL, EROPS W/AC, 9’.6” STICK, 31’.5” PADS, HYD Q/C, 42” BUCKET ............................................................$78,000 20E038 – 2006 CAT 325CL, EROPS, W/AC, 10’.6” STICK, 31’.5” PADS, AUX DUAL FUNCTION HYD, HYD Q/C, 36” BUCKET ....$59,000 19E007 – 2010 CAT 336DL, EROPS W/AC, 10’.6” STICK, 33’.5” PADS, AUX HYD, BKT..............................................................$98,000 21E013 – 2017 CAT 315FL, EROPS W/AC, BACKUP CAMERA , 8’.6” PUSH BLADE, 23’.5” PADS, 9’.10” STICK, DUAL FUNCTION, AUXILIARY HYD, HYDRAULIC THUMB, HYD QC, 58” BKT, 24” BKT $98,000 21E016 – 2012 CAT 336EL, EROPS W/AC, 10’.6” STICK, HYD QC, 33’.5” PADS, AUXILIARY HYD ..............................................$102,000 21E024 – 2017 CAT 308ECR-2, EROPS W/AC, BACKUP CAMERA, PUSH BLADE, 18” PADS W/RUBBER INSERTS, 7’.3” STICK DUAL FUNCTION AUX HYD, HYD THUMB, HYD QC, 18” BUCKET ....$58,000

RUBBER TIRE LOADERS / WHEEL LOADERS 19E068 – 2013 CAT 924K, EROPS W/AC, HYD. FUSION QC, GP BKT, RIDE CONTROL, TRACTION CONTROL, POWER AND HEATED MIRRORS, 20.5 X 25 TIRES ..........................................................$89,000 19E078 – 2012 CAT 930K, EROPS W/AC, HYD FUSION Q/C, AUX HYD, GP BUCKET, RIDE CONTROL, TRACTION CONTROL, POWER AND HEATED MIRRORS, REARVIEW CAMERA, 20.5X25 TIRES ......$92,000 21E005 – 2013 CAT 950K, EROPS W/AC, GP BUCKET, RIDE CONTROL, BACKUP CAMERA, SCALE, AUTO GREASER, POWER AND HEATED MIRRORS, ROADING PACKAGE, 23.5X25 TIRES......$95,000 21E012 – 2005 CAT 966G-II, EROPS W/AC, GP BUCKET, RIDE CONTROL, 26.5R25 TIRES ............................................................$75,000

DOZERS 20E014 – 2012 CAT D6T XL, EROPS W/AC, CAT REBUILT TRANS, 10'.8" SEMI-U-BLADE W/TILT, RIPPER CONTROLS, ACCUGRADE PREWIRE, 24" SHOES, DRAW BAR ......................................$125,000 19E058 – 2017 CAT D6K-II LGP, EROPS W/AC, STRAIGHT 6-WAY BLADE, RIPPER CONTROLS, GRADE CONTROL, NEW UC, 30" SHOES ..............................................................................................$135,000 20E004 – 2015 CAT D5K-II LGP, EROPS W/AC, 10'.4" STRAIGHT 6-WAY BLADE, RIPPER CONTROLS, GRADE CONTROL, 26" SHOES ..$82,500

LOADER BACKHOES 21E001 – 2009 CAT 450E, EROPS, W/AC, 4X4, POWERSHIFT W/AUTO, RIDE CONTROL, 4-IN-1 BUCKET, FRONT AND REAR AUXILIARY HYD, EXT-HOE, PATTERN CHANGER, 24” BUCKET........$69,000 19E038 – 2007 CAT 430E-IT, EROPS W/AC, 4X4, FRONT AUX HYD, Q/C, GP BUCKET, EXT-HOE, PATTERN CHANGER, 24” BKT ..$43,000 21E022 – 2005 CASE 580SM-II, EROPS W/AC, 4X4, GP BUCKET, EXT-HOE, 24” BUCKET ............................................................$38,000

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

Used E ipment Equ

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

www.newarkequipment.com • www.newarkequipment.com • www.newarkequipment.com

2018 Case CX210D Narrow, stk # EQ0033054, Cab w/Heat & AC, Long Arm 9'8", 24" TBG Pads (8'6" Overall Width), Multi-Function Aux. Hydr., QC, Hydr. Thumb, 42" HD Bkt, 1,025 Hrs ....$169,500

2017 Case CX250D, stk # EQ0047907, Cab w/Heat & AC, 9'10" Arm, 32" TBG Pads, Multi-Function Aux. Hydr., Hydr. QC, 48" Bkt, 3,927 Hrs ..............................$129,500

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... $121,053

2006 Case 621D, stk # EQ0045623, Cab w/ 2012 CASE 621F, STK # 652, cab w/ heat & air, Heat & JRB Hydraulic QC, GP tires, Bucket, 3rd spoolAC, valve, cwt, ride control, radial 307 20.5 25 Tires, 10,469 Hrs ............$39,500 hoursx....................................................... $121,053

2019 Case CX250D Long Reach w/ 60' Reach, Cab w/ Heat & AC, Long U/C, Long Reach Boom, 26'3" 32"cab TBG 2012 CASE 621F , STKArm, # 652, w/ Pads, heat & 60" air, Ditching Halogen Remaining 3rd spoolBkt., valve, cwt, rideLights, control, radial tires,Premier 307 Warranty & Pro-Care, 1050 Hrs..............$172,500 hours ....................................................... $121,053

Call today! (800) 737-0049

M E M B E R

See Our Website for a Complete Listing of Used Equipment for Sale

www.gtmidatlantic.com ©2019 GT Mid Atlantic. All rights reserved. CASE is a trademark registered in the United States HUK THU` V[OLY JV\U[YPLZ V^ULK I` VY SPJLUZLK [V *5/ 0UK\Z[YPHS 5 = = P[Z Z\IZPKPHYPLZ VY HɉSPH[LZ


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 15

H.O. Penn Renting g Made M Eassyy

Web

Mobile

888-REENTT--CAT AT www.ho openn.com

Phone


Page 16 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Volvo Sets Out to Inspire Tomorrow’s Female Engineers We simply do not get enough female candidates applying for these sorts of technology roles …” Anna Sannö

“It is not just a problem for us, it is a societal problem for us all …” Anna Sannö Volvo CE

Volvo CE

Following the discouraging news that it is around the age of 10 at which girls stop considering engineering as a potential career path, Volvo Construction Equipment (Volvo CE) saw it as an opportunity to redress the balance. Through a series of innovation workshops called Vera — in honor of Sweden’s first female engineer Vera Sandberg — Volvo CE together with strategic partner Mälardalen University (MDH) set about reversing this trend by inspiring young girls to recognize their abilities in science and technology. In these workshops, girls aged 10 and over are given a series of challenges, all of which are set against real-life scenarios, and provided with a number of tools and materials to work together to find technological solutions. Not only have the girls shown a stronger interest in these subjects as a result, but evidence shows that the long-term benefit of a better gender balance in engineering will result in more inclusive and innovative solutions for society’s complex problems. The influence behind the initiative comes from the findings of researcher Ulrika Sultan from Linköping University, whose work is focused on understanding why are set a number of challenges designed girls lose interest in technology Students to illustrate the importance of engineering. education as they get older. In many Western countries there is a cultural tipping point at around the age of 10. tive along with San Giliyana and Natalie Sultan, who used to be a teacher herself, Agerskans from Mälardalen University, said: “In our study, we stress that at nine said: “At Volvo CE we were really encouryears’ old, girls can and do strive to be the aged by this idea that we could reach out to best, but suddenly, just one school year later, girls at a younger age and show them the they move from being excited to showcase potential for a career in engineering. We simtheir intellect and problem-solving skills to ply do not get enough female candidates applying for these sorts of technology roles shying away from revealing their best.” But by reaching out to these girls and giv- within the company. “It is not just a problem for us, it is a sociing them the support and mentoring needed to boost their perception of these subjects, etal problem for us all because if we exclude organizers of the Vera innovation workshops 50 percent of the population of technology users from being technology creators, we believe it is possible to reverse this trend. Anna Sannö, research strategy manager, will see a society only addressed for men by at Volvo CE, who is co-managing the initia- men. In this program it has been incredibly

At the workshops, students will spend one hour each week over four weeks to solve problems such as how to make traffic safer, how to use technology to help us throw away less food and how to make recycling more fun. The challenges are designed to be rooted in reality with a focus on sustainability. “We’ve discovered that the more open ended the challenge and the more recognizable it is to the world around them, the more engaged these girls become,” said Sannö. “In the first 15 minutes they are usually quite hesitant, but by the end they are more confident in their opinion and are even happy to present their findings in front of everyone.” Anna Sannö (L) and Ulrika Sultan at one Importantly, the workshops and materials of the workshops. are presented in exactly the same as what would be presented to boys, letting the girls’ experience the challenges as authentically as possible. In just the same way as organizers recognize that innovation has no gender, there also is no restriction on the gender of the mentors. The sessions are run equally by women and men in order to demonstrate that reversing these gender stereotypes is the responsibility of everyone. Every workshop conStudents are tasked with solving real-life challenges using technology and teamwork. cludes with presentations from Volvo CE engineers rewarding to work like this with our poten- and university students and professors. tial future colleagues.” While it is a learning opportunity for the Originally started in 2019 as a way to cel- girls, it also is a chance to help school teachebrate the life of engineer Vera Sandberg, the ers rethink the way they present engineering workshops were held across 13 universities as a career option for girls. in Sweden and were primarily focused on The initiative has proved a great way to older children, as well as raising awareness connect real life to the work carried out among decision-makers. MDH as a univer- every day at Volvo CE. By taking part in the sity decided to build on Sultan’s discovery of workshops, sharp-thinking students can betthe importance of reaching girls at a much ter picture themselves succeeding in a career younger age and opened up the workshops in science and engineering and in doing so to 10-year-olds. Now the events will be play an important role in one day effecting moving online — to keep children safe dur- positive societal change. ing the pandemic — until they can meet For more information, visit again in person. www.volvogroup.com. 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 17

s

Vermont 802-658-1700 Massachusetts 508-4999-1950 Pennsylvania 717-795-0700 -0700 New Yoork 315-676-20088 www.woodscrw.com


Page 18 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

• We can provide you with the world’s largest or smallest trench box or sh shoring horing system. system • Get high produ uction numbers while keeping yyour workers safe. • We will show you y how with our on-site supervission. • Contact us for the t world’s very besst shoring • We will deliver on time,

E

R

E

We’ll e bring it with our fleet of truckswhere you want it, when you want it. • We are told by our customers that “No one beats our service”... So don’t take our word for it, it just ask the peo ople who use our pro oduct.

RENT REN TALS T TA A LS S S A LES SALES S ER VICE SERVICE E R EP REP PAIRS P A IRS IR S • See our Entire Linee • Call for Catalogs Including: ding: Rock Boxes • Road Plaates • MightyLite® • • Hydraulic Shoring •

Fa Factory & Corporate Office: 20 07 LAKE STREET (Route (Ro te 32 32) 2) NEWBURGH, NY, 12550

1 1.845.562.4477 7

Calll us for local Metropolitan New Yor ork, Neew Jersey and Connecticut Inquiries. s.

Factory Direct Stores: Fo New England: Maine, Vermont, For e Neew Hampshire p and Weestern NY Statte Slide System with Portable Safety Rail Installed

Call our Boston area location n: 283 E Cherry Street Sh e sb , MA 01545 Shrewsbury

1.508.842.2822 Foor the Mid- Atlantic Region: Eastern Pa, So. Jersey,, Delaware, Maryland and Virginia i nia

Calll our Baltimore area locatioon: 506 Pulaski Highway Joppa, MD 21085

1.443.313.3461 O Phone Pho on ne uss Or Toll T oll Free oll FFr Fre reee from ffr fro ro om anywhere: aanyywh wh h heere re: e:

1-8 8 800 00 0 0-4 -4 407 07 7-4 -4 4674 4674 www w.americanshoring.ccom E-M Mail i us at: il t: ssaless@americanshorring.ccom o


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 19

2021 USED DOOSAN EQUIPMENT SALE

2014 Doosan DX180LC-3, 3310 Hrs, s/n SR2979 ..............$59,900

2014 Doosan DX180LC-3, 4250 Hrs, s/n SR3001 ..............$75,750

2014 Doosan DX180LC-3, 3375 Hrs, s/n SR2992 ..............$65,900

2014 Doosan DX180LC-3, 2680 Hrs, s/n SR3047 ..............$72,500

2014 Doosan DX180LC-3, 2310 Hrs, s/n SR3048 ..............$79,900

2014 Doosan DX180LC-3, 2610 Hrs, s/n SR2978 ..............$75,500

2013 Doosan DX210W, 2420 Hrs, s/n SR2821 ....................$104,500

2014 Doosan DL350-3, 4350 Hrs, s/n SR2994 ....................$102,500

2013 Doosan DX140LCR-3, 3095 Hrs, s/n SR2816 ..............$72,500

Doosan DX190W-3, 2420 Hrs, s/n SR3153 ....................$105,900

2015 Doosan DL250-3, 2075 Hrs, s/n SR3223 ......................$89,900

2013 Doosan DX210W, 2420 Hrs, s/n SR2821 ....................$104,500

1569 US Route 9W •  Selkirk, NY 12158 (518) 767-9331

www.finkeequipment.com


Page 20 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tech School Buys Volvo Loader From Hoffman Equipment By Jessica Bueno

Lehigh Career & Technical Institute photo

MARKETING AND COMMUNICATIONS SPECIALIST, HOFFMAN EQUIPMENT

The Lehigh Career & Technical Institute (LCTI) in Schnecksville, Pa., evaluated its equipment options and decided to purchase a Volvo L90H wheel loader from Hoffman Equipment. LCTI offers technical programs ranging from medical/dental assistant to heavy equipment operations and more, making it the largest technical school of its kind in Pennsylvania and one of the largest in the country. Hoffman Equipment recognizes the need to help build and expand the future of technical/construction skills in the industry, which is why Hoffman product specialists were enthusiastic to work with students by going over the L90H wheel loader and all of its technical features. Along with this training session, Hoffman, in partnership with Volvo, treated students to a delicious “Taco The Lehigh Career & Technical Institute (LCTI) in Schnecksville, Pa., offers technical programs ranging from medical/dental Lehigh Career & Technical Institute photo

assistant to heavy equipment operations and more, making it the largest technical school of its kind in Pennsylvania and one of the largest in the country. Lehigh Career & Technical Institute photo

Hoffman Equipment’s product specialists were enthusiastic to work with students by going over the L90H wheel loader and all of its technical features.

Hoffman, in partnership with Volvo, treated students to a delicious “Taco Thursday” lunch from the Taco Town food truck.

Lehigh Career & Technical Institute photo

Thursday” lunch from food truck, Taco Town. “I think it’s great that Volvo is involved in technical skills training,” said Jim Wabals, instructor in heavy equipment operations and preventive maintenance of LCTI, as well as one of SkillsUSA’s state’s heavy equipment competition co-chairs. “Obviously, they’re investing in the future. An investment in the school, invests in the future. And everyone knows this industry is in desperate need of people.” SkillsUSA is an organization that encourages students to seek careers in skilled professions in the manufacturing sector. Volvo Construction Equipment is a big supporter of SkillsUSA.The state’s heavy equipment competition is held at the The Lehigh Career & Technical Institute purchased a Volvo Volvo customer center in Shippensburg, Pa. L90H wheel loader from Hoffman Equipment. Hoffman Equipment’s President Tim Watters

agreed that the industry is in need of skilled trade professionals. “Our industry is incredibly challenged by the vast shortage of skilled trade workers to fill technical roles. It’s no surprise that as an undisputed leader in our industry for technological innovation, that Volvo Construction Equipment would get involved in an organization such as SkillsUSA. Volvo truly inspires our next generation, but there are incredibly challenging careers out there as an alternative to the traditional four-year degree.” Hoffman Equipment and Volvo are companies that are greatly involved in the growth of the skilled technician generations to come. They are proud to support and encourage the expansion of technical trades, particularly in the heavy equipment operation and construction industries. 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 21


Page 22 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

(6) 2002 IR 185 CFM Compressors

2005 IR MC 330

2000 Peterbuilt 357

Mounted on IH 4700 Trucks ......Call for Prices

W/ 18000# Knuckle Boom, 20 Ft. Dump Body 90K ORIGINAL MILES ..........................$28,500

1980 Pettibone 30CM 15 Ton Crane

(3) 1998 IR 525CFM Compressor 1500 Original Hours ................................................................................................$19,500

Call or E-mail Mike Pearl

64’ Boom Hook Block............................$17,500

914-980-8890 equipmart@aol.com

EQUIPMENT WANTED Mounted on 1998 Ford Truck ....Call for Prices


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 23

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS


Page 24 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Ad Campaign: Equipment Manufacturers Hail Sen. Peters’ Economic Growth Leadership On American Manufacturing Via Infrastructure The transportation construction, labor and business community are jointly launching an ad and social media campaign to push for action this year by Congress and the Biden administration on a transportation infrastructure investment package that improves mobility and fuels economic growth. Beginning April 12, a television spot will run inside the Beltway aimed at members of Congress, staff and other policymakers. The TV commercial will be supplemented by online ads that began April 10 on social media and influential digital sites popular with D.C. legislators and influencers. The campaign will extend on April 26 with online social media and website advertisements running in the states and districts of 22 key members of Congress. The ads will run during congressional recesses. The central message of the “Moving Forward” campaign: investing in transportation infrastructure is crucial to continuing the U.S. economic recovery and creating jobs. The ads direct viewers to a landing page on the Transportation Construction Coalition website where the economic benefits of transportation infrastructure investment are spelled out. The television spot and samples of the digital ads are available at FundInfrastructureNow.org. The campaign is an initiative of the Transportation Construction Coalition (TCC) and U.S. Chamber of Commerce-led Americans for Transportation Mobility (ATM) coalition. The TCC and ATM ads will run through late May. About Transportation Construction Coalition Established in 1996 and co-chaired by the American Road & Transportation Builders Association (ARTBA) and the Associated General Contractors of America (AGC), the 31 associations and labor unions that make up the TCC have a direct market interest in the federal transportation program. A complete list of members can be found at: www.transportationconstructioncoalition.org. About Americans for Transportation Mobility (ATM) The Americans for Transportation Mobility (ATM) coalition was established by the U.S. Chamber of Commerce in 2000. It brings together businesses, the labor and union sectors, transportation stakeholders and the public to advocate a robust transportation infrastructure grid in the United States. This includes promoting ongoing and sustainable funding through policies and broad-based initiatives. 

Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com

Association of Equipment Manufacturers (AEM) president Dennis Slater issued the following statement in support of a legislative package introduced by U.S. Senator Gary Peters (D-Mich.). The package establishes a National Institute of Manufacturing within the Department of Commerce, reactivates the National Manufacturing Advisory Council and creates a website that will serve as a hub for information about federal manufacturing programs. “The Association of Equipment Manufacturers applauds Senator Gary Peters for his steadfast leadership on behalf of the manufacturing sector and for introducing legislation that will ensure that innovation is made in America and strengthen our long-term competitiveness in the global economy,” said Slater. “Equipment manufacturers represent 12 percent of the entire U.S. manufacturing sector and support 2.8 million family-sustaining jobs across the country. Our economic prosperity and

national security “In order to maintain depend on a strong our competitive edge in manufacturing sector, the global economy, the and the legislative packfederal government age developed by must provide the leaderSenator Peters will ship and resources we mobilize a comprehenneed to invest in sive, coordinated, and research and developcompetent national ment, create more famieffort in support of the ly-sustaining jobs and manufacturing sector continue to make U.S. Senator Gary Peters world-class products in and its workforce. “We applaud the Michigan and across Senator for his bold and tireless leader- the United States. ship on behalf of the manufacturing “We would like to thank Senator sector and we urge all Democrat and Gary Peters for his ongoing efforts to Republican Senators to support this prioritize manufacturing policy at the important legislative package.” national level and ensure that the future “With a long and rich history of is made in America. We hope that his manufacturing hundreds of world class colleagues in the United States Senate products in Winn, Michigan, we know will join him in strengthening the U.S. first-hand the critical role that manu- manufacturing sector and guarantee facturing plays as the engine that the economic well-being of manufacdrives the economy by creating jobs, turing communities across the counopportunity, and prosperity for try.” Americans,” said Brad Boehler, presiFor more information, visit dent and CEO of Morbark. www.aem.org. 

Maryland’s General Assembly Approves New $59.5M Hagerstown Baseball Park A new sports and entertainment facility, specifically designed to accommodate a minor-league baseball team, will soon begin construction in Hagerstown, Md., after the state’s General Assembly approved a bill April 12 to fund the project. Gov. Larry Hogan’s signature on the bill will be the final step to finance the $59.5 million multipurpose facility. There are no firm plans on an opening date for the first pitch at the stadium, though 2023 is the likeliest debut as of now, reported Ballpark Digest. In addition to serving as the home of a new Major League Baseball (MLB) Partner League team in the Atlantic League, the facility will host other sports, music and community events. The bill authorizes the Maryland Stadium Authority (MSA) to issue bonds to finance the acquisition, design, construction and related expenses to construct the Multi-Use Sports & Events facility, according to a city of Hagerstown press release.

Additional monies for the venue include $8.5 million Hogan put in the most recent supplemental budget toward the effort, and the General Assembly earmarked another $1.5 million in the recently passed Capital Budget for the Hagerstown project. Once the Maryland Stadium Authority has completed the design and subsequent construction process, the facility will be owned and operated by the Hagerstown-Washington County Industrial Foundation (CHIEF), according to Ballpark News. “The passage of this bill represents a generational opportunity to transform the trajectory of our community for future generations in a way we have never seen before,” said state Sen. Paul Corderman, a sponsor of the bill. He also cited the support of Hogan, along with other key members of Maryland’s Senate, House, Budget & Tax and Appropriations committees, in getting the Hagerstown facility one step closer to reality. He called the ballpark a “tremendous economic development opportunity for our com-

munity.” It was disclosed in February that Hagerstown businessman Howard “Blackie” Bowen, CEO and chairman of the board of Ewing Oil Co., would lead the new baseball team ownership group. “I’m very excited for the opportunity to bring a locally-owned, Atlantic League expansion team to Hagerstown,” Bowen said via press statement. “In addition to being a home for this elite professional baseball league, we look forward to using the Hagerstown Multi-Use Sports & Events Facility to host hundreds of other family friendly events each year. The facility will serve as a community gathering place for decades to come, while acting as a catalyst for new investment in the area.” The Hagerstown Suns had been a longtime Minor League Baseball franchise, affiliated with the Washington Nationals major league team. However, the team was not asked to be part of MLB’s reorganization of the minor leagues for the 2020 season. 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 25

We’re Your CALL US S Used Equipment TODAY DAY Y Headquarters! CONT C ONT TA ACT CT JIM TIRONE , USED EQUIPMENT MANAGE ER, FOR LOW-RAT TE FINANCING G

570-499-9170 J T I R O N E @ F I V E S TA R E Q U I P M E N T. C O M

F I V E S T A R E Q U I P M E N T. C O M DUNMORE, PA

KIRKWOOD, NY

WA ATERF T ORD, PA

ORCHARD PAR ARK, NY

WILLIAMSPORT, PA

ROCHESTER,, NY

2016 JOHN DEERE 160G LC $

150,000

Stk# 23466, 1232 Hrs, Cab w/ AC, Cntrl Pattern Select, 24" Pads

2013 JOHN DEERE 250G LC $

95,000

2015 JOHN DEERE 85G

90,000

$

Stk# 23395, 6202 Hrs, 32" PADS11'10" ARM-PLBG-PC-NOBK

Stk# 23718, 1974 Hrs, Cab w/ AC, Rubber Pads, 18" Pads

2008 JOHN DEERE 85D

2014 JOHN DEERE 310SK

SYRACUSE, NY

WE PROUDLY REPRESENT THESE BRANDS AND MORE!

2016 JOHN DEERE 130G

130,000

$

54,000

Stk# 15663, 1,276 Hrs, JDLink Ultimate; Stk# 24076, 3395 Hrs, Cab w/ AC, 600MM std track shoes; ; arm 9’11” Long Arm, Rubber Pads

2017 JOHN DEERE 544K-II $

RENT BIG IRON. THE BIGGER THE IRON, THE MORE YOU O SAVE

$

147,000

2017 JOHN DEERE 310SL/HL $

75,000

65,000

$

Stk# 24013, 1384 Hrs, Cab w/ AC, 4X4 Power Shift Tran

2005 JOHN DEERE 310SG

32,000

$

Stk# 23456, 1537 Hrs, Cab w/ AC, Ride Control, Front Diff Lock

Stk# 23876, 1871 Hrs, Cab w/ AC, 4X4 Power Shift Tran

Stk# 24074, 6,537 Hrs, Cab w/dbl door; 24” HD bucket; ride control

2013 JOHN DEERE 624K

2009 KOMATSU X155AX-6

2013 JOHN DEERE 850K

WE ’ R E YO U R R E N TA L HEADQUARTERS

$

130,000

Stk# 24312, 1928 Hrs, Cab w/ AC, Ride Control Powertrain

$

128,000

Stk# 31593, 7055 Hrs, GPS Ready

82,000

$

Stk# 23497, 7607 Hrs, XRTL-CAB/ AIR-30" ES PAD-152" BLD-LANDFIL


Page 26 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Design Under Way for New UMA Geotechnical Headquarters UMA Geotechnical Construction, a geotechnical contractor serving the Mid-Atlantic region, has announced that construction will soon be under way on its new headquarters in Colfax, N.C. The company acquired the 15.5-acre parcel at 8051 National Service Road in December 2020 and currently is engaged in the design process. “UMA is growing rapidly, and we’re expanding our team and equipment fleet to manage our increasing workload,”

said President Brian DeSpain. “This new and improved facility will allow us to accommodate that expansion for years to come.” The new 24,000-sq.-ft. building is substantially larger than its existing headquarters. The new building can accommodate four times the quantity of offices and twice as much shop space. The parcel also will contain enough unused land for secondary specialty shops to be constructed. UMA’s new headquarters also will offer some features

that were not included in the existing building, including a dedicated paint room, parts storage areas, multiple conference rooms and dedicated offices and locations for employees. UMA is targeting a building completion date of June 2022, barring any unforeseen issues with the municipal approvals process. The contractor plans to occupy the new headquarters in September 2022. For more information, visit www.team-uma.com/. 

Building elevations for UMA Geotechnical Construction’s new 24,000-sq.-ft. headquarters in Colfax, N.C.

Developers to Create $3B Mixed-Use Project in Jersey City A joint venture between Argent Ventures and the Canadian-based H&H Real Estate Investments Trust is in the preliminary stages of transforming 18 acres on the Hudson River waterfront of Jersey City, N.J., into “The Cove,” a $3 billion mixeduse campus. Favorable zoning allows for multiple uses at the new development, including residential, office, retail, hotel, laboratory and research facilities. As a result, The Cove will offer 1.4 million sq. ft. of lab and office space for life science and other tech users at rental rates lower than those found across the river in Manhattan. The Cove looks to draw upon the region’s numerous life-science employers, New Jersey’s sizeable life-science labor force and Jersey City’s urban dynamic in a state where most lab space is within suburban office campuses built decades ago. Additionally, local regulations will permit up to 2,840 residential units at the development. The Cove will feature bold architectural designs and bring a completely new vision to the area bordering the New Jersey Turnpike to the west and downtown Jersey City to the

tial $10 million environmental remediation at 18 acres of property along Jersey Avenue and Aetna Street. The site is also just south of Jersey City Medical Center and next to Liberty State Park. The next phase of the project will focus on infrastructure improvement design and permitting. The work will be performed in coordination with Doug Neumann the Jersey City Redevelopment Dresdner Robin Agency (JCRA) and the Jersey City Municipal Utilities Authority. Jersey Digs recently noted that a north. To the east, residents and workers at series of land-use permits are expected to be the campus will be afforded spectacular submitted to the state’s Department of views of the Manhattan skyline when the Environmental Protection in the coming project is complete. months as part of the next phase. When conAn initial set of renderings released by struction on the property starts this summer, Argent show a slew of buildings at the according to Argent, a site elevation of 10-12 sprawling property, but the first components ft., as part of resiliency efforts, will be underof the development would fall along the por- taken. tion of the parcel near Liberty Landing Dresdner Robin, the provider of environMarina, reported Jersey Digs, the real estate mental, civil engineering, surveying, and and development news website. They planning services on the development of The include a planned two-acre public park con- Cove, highlighted sewer upgrades in a statesisting of an ecologically restored tidal salt ment heralding the progress and noted that marsh surrounded by two mixed-use towers. the endeavor includes a large subsurface In 2020, New Jersey-based land-use con- overflow storage chamber that will be used sultancy Dresdner Robin performed an ini- to temporarily store discharges during heavy

“It is without question the most complicated remedial project that I have been involved with.”

rain events. “This is not a typical redevelopment project,” Dresdner Robin’s Director of Environmental Services Doug Neumann told Jersey Digs. “It is without question the most complicated remedial project that I have been involved with.” Ennead Architects, from New York City, has been brought in to design the proposal. Renderings from the firm show one residential tower would be slated for the area just north of the marina, while the second highrise would be situated near the entrance to Liberty State Park. Illustrations show extensive walkways and open space between the towers and the various lab buildings that will make up The Cove. Argent will need to obtain additional approvals before construction of the towers can begins. For instance, approvals from Jersey City’s planning board are still needed, and it appears as though Argent has yet to submit a formal application to officials, according to Jersey Digs on April 12. Despite that, the company has announced that it expects construction to commence on The Cove’s initial towers in 2022, which should closely coincide with work wrapping up at the nearby Jersey Avenue extension over Mill Creek. 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 27

F I N A N C I N G AVA I L A B L E 286 Central Ave., South Kearny, New Jersey 07032

800-255-5512 Phone 973-589-4100 • Fax 973-589-4811

E-mail: info@tes-inc.net • Website: www.tes-inc.net

2020 Talbert Hydraulic Trailer, 55 ton, 48’ x 102”, 37’ lower deck, 20,000 # winch, Aluminum wheels, Dock levelers, Remote controls P.O.R.

2015 Manitou MT625, 5,500 lb. maximum lift capacity, 19’ 2” lift height, semi enclosed cab, 60” shaft type carriage, diesel engine, F.O.B. New Jersey ..............................P.O.R.

1980 Manitowoc 4100W SII, 230-ton, S/N: 41649, 150' boom ................................P.O.R.

2001 Link-Belt RTC 8040 SII, 40-ton, S/N: F7J1-5291, 105’ main boom, 28’-51’ 2-piece jib, Hydro gas ride, Aux winch, Rear steer indicator.... ..........................................P.O.R.

2006 Link-Belt 218 Hylab HSL, 110 ton, 140’ main boom, Tier 3 diesel engine, “ABC” ctwts, side frame ctwts, F.O.B. New Jersey ........ ..........................................P.O.R.

2015 Manitou MRT 2150P+, 11,000 lbs. capacity, 67’7” max lift height, Enclosed cab w/ heater & AC, F.O.B. New Jersey ..............................P.O.R.

2006 Manitou MT 8044XT, S/N: 318157, 8,000 lbs. capacity, 44’ max lift height, 3 speed powershift transmission, 4 wheel drive, F.O.B. New Jersey ......................P.O.R.

2008 Link-Belt RTC 8090, 90ton, 140’ main boom, 35’ – 58’ jib, 2 winches ..................P.O.R.

2000 Manitowoc 2250, 300ton, Series III ctwt option, 260' boom, Cummins diesel, S/N: 2251051 ....................P.O.R.

2009 Shuttlelift 3340B, S/N: 321134, 10.5-ton, Diesel engine, Independent outriggers, 13’-32’ boom w/12’-28’ jib, Block & ball, New York City swing lock ..............P.O.R.

2013 Manitou MT10055, 10,000 lbs. capacity, 55’ lift height, open cab, 4 speed forward/reverse, F.O.B. New Jersey ..............................P.O.R.

2007 Kalmar DCE 140-6, 31,000 Lbs. @ 24” LC, Enclosed Cab w/Heater, CAT Diesel C6.6, Dana TE1300 Trans, 167” Triple Mast, SS/FP, 96” Forks .. ..........................................P.O.R.

Authorized Dealer


Page 28 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.GroffTractor.com

Used Equipment

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... ................................... $121,053

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053 2012 CASE 580SN, EQ46102, SN:

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... ................................... $121,053 NCC564232, 4,112 hours ...... $41,900

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053

2012 CASE 621F, STK # 652, cab w/ heat & air, 3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... ................................... $121,053

THIS IS WHY You call Milton CAT when you need to rent a generator: • Availability. Even when everyone else needs a generator, you’ll get yours. • Product quality. All EPA-certified, clean, well-serviced gensets. • Complete range. From 20 to 2,000 kW; Diesel and gas; portable and Tier IV models. • All the ancillaries. • Expert support; 7/24 service. • Priced to fit your budget.

Generators, Compressors, Chillers

800-821-6412 Serving MA, RI, NH, ME, VT and Upstate NY.

Genuine CASE Parts for Your Equipment Available to Order 24/7 https://ePortal.GroffTractor.com 2012 CASE 621F, STK # 652, cab w/ heat & air,

2012 CASE 621F, STK # 652, cab w/ w heat & air, 3rd spool valve, cwt, ride control, radial tires, 307 hours ....................................................... ......... $121,053 $121 053

3rd spool valve, cw wt, ride control, radial tires, 307 hours ....................................................... ................................... $121,053 $121 053

For Parts Parts & & Service 800-33-GROFF(47 (47633) For Service Call CCall800-33-GROFF 7633)

Call today! 800 0-33-GROFF(47633) 633)

See Our Website for a Complete ete Listing of Used Equipment for Sale M E M B E R

w www.grof ftractorr.com .com www.GroffTractor.com

www.casece.com

www.miltoncat.com ©2015 CNH Industrial America LLC.. All rights rreserved. CASE is a trademark rk registered r in the United States HUK THU` V[OLY JV\U[YPLZ V^UL LK I` VY SPJLUZLK [V *5/ 0UK\Z[YPHS 5 = = P[Z Z\IZPKPHYPLZ VY HɉSPH[LZ


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 29

Contact Jamie Gales 10906 NW South River Drive Medley, FL 33178

(305) 851-3963 (305) 851-3670

IMPECO CORPORATION MIAMI MACHINERY

Hundreds of used machines in stock and ready for delivery Construction-Ag-Industrial Sales Trusted Dealer Since 1994

Call or Check out our website for more info: www.miamimachinery.net

2015 John Deere 310SK Hours: 2121 $36,000

2017 Kubota SVL95-2S Hours: 954 $41,600

2017 Caterpillar 289D Hours: 560 $42,800

2015 John Deere 333E Hours: 65 $39,600

2016 Bobcat E45 Hours: 684 $29,100

2015 Bobcat E35 Hours: 538 $24,400

2004 Caterpillar 312C L Excavator Hours: 6,285 $39,800

2005 Caterpillar 950G Hours: 8,167 $59,900

2004 John Deere 544J Hours: 5,350 $50,200

2012 Caterpillar D6T XL VP Hours: 6,525 $77,500

2013 John Deere 6115D MFWD Hours: 1,074 $34,800

2020 John Deere 3039R Hours: 14 $25,500

2013 John Deere 8285R MFWD Hours: 995 $88,400

2010 John Deere 8345R Hours: 5,096 $69,900

2012 John Deere 6125R MFWD Hours: 285 $56,200

2008 John Deere 7830 MFWD Hours: 1,807 $63,900

2010 John Deere 9770 Hours: 2,712 $51,400

2005 John Deere 6420 MFWD Hours: 4,911 $29,200

2008 John Deere 6430 Premium MFWD Hours: 678 $41,400

2010 John Deere 7230 MFWD Hours: 5,028 $34,600


Page 30 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1971

1978

1971: By adding a cargo box to the undercarriage of a combine harvester, Yanmar created the YFW500D, the world’s first tracked carrier. The YFW500D was powered by a Yanmar diesel engine and could transport materials on soft ground where trucks and dump trucks could not enter.

1978: The YFW26D, had a large loading capacity of 3 tons and was equipped with a 17-horsepower Yanmar vertical water-cooled three-cylinder diesel engine that enabled it to run quickly on slopes. The tough steel crawler made it a favorite of worksites.

Yanmar Celebrates 50th Anniversary of Tracked Carrier 1985

1984

1984: In the late 1970s, the market for wheel carriers was growing, and Yanmar launched the YFW35WA articulated wheel carrier. Equipped with super flat special low-pressure tires for soft ground, the 27 -in. wide 38-in. diameter tires were an unprecedented development among conventional carriers.

1985

1985: Equipped with a 64-hp Yanmar vertical watercooled four-cylinder diesel engine, the YFW40R was launched in pursuit of not only running speed and power, but also comfort and used a large rubber crawler to reduce operator fatigue in a highly maneuverable HST. This model was the prototype for the C50R, which is still sold today.

Y

anmar, this year, celebrates the 50th anniversary of the YFW500D, the world’s first tracked carrier equipped with a Yanmar diesel engine. The original carrier used the undercarriage of a Yanmar rubber crawler combine harvester and added a cargo box to enable it to transport materials on soft ground. Created in 1971, the YFW500D was the world’s first tracked carrier. The carrier was the first in a long line of products from Yanmar developed to meet the needs of the times. Yanmar, a pioneer in compact construction equipment, will mark the celebration of this 50th anniversary of the tracked carrier by renewing the company’s commitment to the development of high-performance products and solutions that offer premium reliability and value for customers. For more information, visit www.yanmar.com/ global/construction. CEG see YANMAR page 108

1985: Yanmar developed a rubber crawler that achieved a speed of 11 km/h, about twice the speed of conventional crawlers. The high-speed YFW25R carrier was a hit product that also featured the industry’s first reverse seat and was the prototype for the C30R model that is still sold today.

1988

1988: Yanmar released the YFW8R, a compact carrier with a width of only 950 mm built tough to work hard on construction sites. Until the YFW8R, tracked carriers had their driver’s seats mounted to one side or the other. But with the YFW8R, for the first time in the industry, the seat was placed in the center making it easy to get on and off from both sides and provided better visibility. This model was the prototype for the C12R, which is still on sale today.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 31

563-8 872-4 4112 112

Bellevue (Dubuque), ubuque), Iowa sales@jjjscheckel.com RENT OR

BUY!

2002 CA ATT D11R - $1855,000

2009 CA ATT D10T - $468,000 $ ,

7PZ High g Horse series, Runs R andd oper p ates a to spec p , RJG S#, 1 Owner since new w,, 8,3000 hours on $683,000 bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Documented CAT Dealer Complet U-blade A/C, HHeaat. Could p e Rebuild, SS ripper pp r,, paint, otherwise very straight i i d, Clean, GGoodd U/C. i h tractor from good home. U blade, Twin tilt, Well maintaine U/C

RENT OR

BUY!

RENT OR

2004 CA ATT D10TT - $$350,000 ,

RJG Series, 23,037 hours, h 4,701 idle dl hours hours, h Single S shank ripper pp r,, U blade with th ttwin Tilt. A/C, Heat. CAT eady to t go. AT dealer d l maintained, Seerviced and rready

RENT OR

BUY!

2013 CA ATT D9T - $618,000

2012 CA ATT D6T D XW VP PA AT - $149,000 $ ,

idle, ARO CAT AT Acc A ugr g ade d GPS Ready. 5,250 Hours, 517 hrs att idle. dl U Blade, l d MS Ripper pp r,, GPS 6,250 Hrs, 1,472 idle l d . Straight S ih Erops, A/C, Diffff Steerr,, VPAT AT 6-w 6-wayy blade l Grade control readyy. Original ppaint, straigh ght & clean. and clean. Rent/Lease e or Buy B y.. Documented maintennance andd oil sample l history.

RENT OR

RENT OR

BUY!

BUY!

BUY!

2012 CA ATT D6T LGP VP PA AT - $$139,000 , 2018 CA ATT 390FL,, A02851- $68 $688,,000 2018 CA ATT 390FL, A002819 - $$628,000 , 2019 CA ATT 374FFL,, A02873 - $61 $618,000 2012 Komats atsu t u PC80 PC800LC-8 - $358 $358,000 8,500 Hours, 2,700 at idle. CAT AT Acc A ugr g adde, AROO, O, GPS 3,100 Hrs, 2 Year Year par p ts/labor /l Cat warranty w y. 27’’ Boom, B 5,780 Totall hrs, h 1,550 at idl dle lle. 2 Year Year par p ts/labor /l b Cat C 6”” 8 Yar ight. 27’’ Boom, readyy. Erops p , A/C, Diff steerr,, Good G d unddercarriage g. 11’2”” SStick, 96” Yardd bucket. 1 Ow wnerr.. Excellent Ex U/C. Warrantyy remains. 1 Ownerr.. Super p straigh B Original, Full documented history,y, as nicce as they come. 14’’ SStickk, 77”” Bucket, B Aux hydraulics, i l super clean machine. Rent/Leease or BBuyy.. d li EExcellent U/C.

RENT OR

BUY!

2006 Komatsu PC800LC-8 - $33 $338,000 , 7,200 Original g hrs, Reputa p tion machinne, Straigh g t, 10”” SStick i k, 72”” Bucket, clean, original gi l. 11’1 11’10” B , Goodd U/C w/ trackk ppads. 32”” tr d Komatsu dealer tested & inspected.

RENT

OR

BUY!

2014 C CA ATT 740B - $218 $2188,000 ,

7,600 Hours, 2,483 at idle, Original g pa paint, Service history,y, Oil samples p , Full workk orrder p ed. dder complet Goodd tirres es, Work W k ready. Rent/Leasee or Buy. B

B POWERTRAIN PLUS REBUILDS

RENT OR

2,211 Hours, 2 Year Y remaining e g CAT AT fac factoryy warranty,y, Reputa p tion 1-ow wner machine, Full history since new w,, k , Reputa 00 Total 11’100”” Stick. 13’7”” Stick S , 4.3 yard 67” 6 ” BBucket p tion 1 ownerr.. 10,0,4400 T hrs, SStraigh g t, clean, fresh ppaint.11’ S Hydraulics tooll control equiped. Super clean/straight. Quick couplerr,, 66 66” 6”” Bucket, B k New trackk grroups oups, 36”” pads. pads S

RENT OR

BUY!

RENT OR

BUY!

2013 CA ATT 329EL - $114,000 ,

4,700 Hours, New 54”” bucket, bbuckk 10’6”” SStick, i k Fullyy

loaded, Longg and Wide UC, Patternn changer g r,, Ex Excellent ll

condition, OOriginal paint. Rentt/Lease /L or Buy.

2014 CA ATT 988K K - $338,000 ,

9,417 Original g hrs, 2 Yearr,, FFacctoryy Powertrain i Warranty W remains. Yard spade p nose bucket, i RRide id control. 10 Yar r d to go! Straight, clean, fully tesstedd andd ready

BUY!

((2)2015 ) CA ATT 982M’ 9882M’s - $258,000 , EA.

RENT OR

RENT OR

RENT OR

BUY!

BUY!

(4)2013-2016 ) C CA ATT 740B’ 740B’s $168 $168 $188 168,,00000 - $188,0 $ ,000 EA.

2015 C CA ATT 836K K - $448,000 $ ,

V RSIONS HIGH REACH CONVE

RUM ROLLERBLADES HOLMES SMOOTH DR

10,900 Total frame hours, h 5,9978 at idle dl , only ly 4,922 of actual “in-oper p ation”” hours. Very goodd feet.. SService vi 11,500 Hours, DDealer maintained, d SService history, h y, Oil O history since new. All systeems testedd to OEM spec. samples, Full work order done. Goood tires, Tailgates.

2015 CA ATT 980M - $258,000 A

77,800 800 Hours, H Agg Aggrega g te t handler dl additions. dditions 1 Ownerr,, Agg ggrega g te handler dler pack p kage g , 6,200 6 200 Hours, H 1 Ownerr,, bbb r,, OOn board scales, Ride control. Goodd radial d l rubb b r,, 7.5 7 5 yardd GP bucket. buck Ride contrrol Good radial rubber bbber ol. Full documented history,y, as nice nic as they come. Full history,y, as nic nice as they h come. Rent/Lease or Buyy..

BUY!

2005 CA CATT 825H 825H8 $248,,000 $248

2008 CA CATT CP56 C - $89,000 $ ,

84”Vibratoryy pad ad ffoot oot, 2,585 Hrs, Enclosed l d CCab, A/C, 15,500 Original fram me hours, Well maintained, p ion, Original g paint, Veryy well maint’d, Excellent feet, Erops, Straigh g t blade w/ tilt, Clean Front blade option, E Fully Serviced & ready d to go. Rent/Lease or Buy. l S i d R machine, Cat Facts ser ervice hi history avail. Rent/Buy.

RENT OR

BUY!

NEW! Ready to ship!

2006 CA ATT D10T Rebuild In n Process - $885,000. Zero hour Powertrain Plus, OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

2017 CA ATT 349FL UHD D - $458,000 ,

Zero hours on custom Ultr Ul a-High H gh RReachh Demolition l Conversion. 96’6” Total reach, u attach boom & h, Quick lines, Hydraulic tilt cab, Highest quality pkg.

visit

Holmes 11F - $23,00 $23,0 ,000 / 16F - $29,000

2016 CA ATT 627K 6 - $478,000 8,000

2018 CA AT RM500B - $580 $580,000

mainingg 2 year parts/service factoryy p , A/C, 33.25+29 25+29 Rubberr,, 978 Hours. Remaining 2 Models, 11’’ or 16’ cutting width. Made in Iowa. 5,070 Hours, Push/Pull, Erops Original paint, Full documented histtory,y, Under h Universall rotor hine Cat Warrantyy. 1 Owner Ow machine, r Construction ggrade, extreemee dduty. For haul h l road & site ddealer l care since new, will not dissappoint! leveling, compacting & sealing dir di t prior to rain event. for both Asphhalt Reclamation or Soil Mixing.

JJSccheckel.com

and w watch our new company vid deo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8TT,, D9TT,, D10TT,, D11T Large Excavators - Cat 374FL, L, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel.com | www. jjsscheckel.com | follow us ffor orr daily updates:


Page 32 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Volvo CE Extends Oil Change Intervals to 1,000 Hours Volvo Construction Equipment is releasing new oil change filters that extend drain intervals to 1,000 hours for articulated haulers, wheel loaders and excavators. Longer intervals save customers up to 50 percent on maintenance costs and planned downtime without compromising component performance or longevity. The maximum engine oil change interval is now 1,000 hours (or 12 months) when using Volvo Engine Oil VDS-4.5 15W-40 or VDS-4.5 10W30 engine oils in conjunction with Volvo high-performance engine oil filters. The extended-interval filters can be ordered from the factory on articulated hauler models A25G– A60H, wheel loader models L60H– L350H and select excavator models from EC140E–EC950F. No component on heavy equipment works harder than the engine oil. From minimizing friction to keeping the engine cool and preventing wear on all moving parts, lubricants clean the system by capturing and filtering combustion by-products. “Maintenance costs are an important part of total cost of ownership, and the extended oil change interval is an important addition

to our Volvo Services solutions to drive uptime, productivity and profitability,” said Alessandro Pasa, director, Volvo Services and Aftermarket Sales. How It Works The new Volvo Engine Oil VDS 4.5 15W40 and 10W-30 lubricants are formulated to better suspend contaminates and maintain

viscosity. The oils are proven to resist sludge formation over the full 1,000-hour drain interval. Improved oxidation and higher thermal stability mean better protection, even under the most severe off-highway applications where engine temperatures can be very high. Lengthening the time between drain intervals gives customers tangible cost sav-

ings in labor and materials while increasing machine uptime. Reducing the frequency of oil changes also has employee safety, environmental and sustainability impacts. Volvo Engine Oil VDS-4.5 exceeds the performance level of standard engine oils currently offered on the market, according to Volvo. These high-quality mineralbased engine oils were rigorously tested using the Volvo Group’s T-13 engine test, which measures piston ring wear, cylinder liner wear, lead corrosion, oil consumption, oxidation and nitration. VDS-4.5 lubricants passed with significant margins that exceed industry standards. No measurable component wear was observed, even after the full test period was completed. While older machines can benefit from Volvo high-performance oils and filters, users should adhere to the drain intervals defined in their operator’s manual. Check with your local Volvo dealer to learn whether your current Volvo equipment qualifies. For more information, visit www.volvogroup.com. 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 33

Construction LLineup Durable Kubota engines

Upgraded tech & features

POWERFULL. DEPEND DABLE. ABLE. RELIABLE. NOW THA AT’S T’S A HARD-WORK HARD-W KING CREW W.. Stop by for a closer look at our o complete construction lineup. Ma^ phke] l * l^eebg` \hfiZ\m \ ^q\ZoZmhk _hk ho^k *. r^Z Zkl# • Powerful,, comfortable new SVL97-2 track loader FZg^no^kZ[e^% ab`a&obllb[bebmr% ab`a i^k_hkfZg\^% g^p K/-) pa^^e ehZ]^k

*Accordingg to 2019 data from Off-Highway Research includingg all Kubota Groupp brand sales. © Kubota Tractor Corpporation, 20021. This material is for descriptiv p e ppurpposes only. Kubota disclaims allll representations and warranties, express or implie l ed, d, or any liability l y ffrom the use of this material. For complete l warrranty, safety and product information, f consultl your local Kubota dealer. For the complete disclaimer, go to KubotaUSA.ccom/disclaimers /d l andd see the posted disclaimer.

71789BENDERS 6 -70 -SVILLE 0 2 WWW W.MESSICKS.COM ABBOTTSTOWN CARLISLE ELIZABBETHTOWN HALIFAX

Four locations serve Maryland, Delaware, Washington, D.C. and parts of Virginia, New Jersey, and Pennsylvania Elliott & Frantz can show you the latest Gradall models, including Series IV excavators with highway speed travel capability. Featuring AutoDrive™, these models integrate a 6-speed automatic transmission and a new transfer case for efficient, simplified travel as well as convenient jobsite repositioning from the upper cab. Gradall excavators also feature the job-proven telescoping, tilting boom that enables you to do more different jobs with just one machine – even under bridges and trees.

1999-2005 Heil Dry Bulk Trailers Prices range from $10,000-$20,000

1986 Stephens 12yd Batch Plant 24” Feed Conveyor with 2 Feed Bins 36” Batch Belt. All Beams are available

Price $145,000 Please contact Tim Kurz for questions or pricing: 267-566-1802 or tkurz@silvi.com

Silvi Group Companies Fairless Hills, Pennsylvania

www.silvi.com

WWW.ELLIOTTFRANTZ.COM

Delmar, DE 302-846-3033 Jessup, MD 410-792-9134 King of Prussia, PA 610-279-5200 Manassas, VA 703-257-2381


Page 34 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Takeuchi-US Officially Opens New Training Center Takeuchi-US hosted a ribbon cutting ceremony and open house at its new 37,000-sq.ft. training center at 113 Bonnie Valentine Way in Pendergrass, Ga., on March 25. Located next door to the company’s headquarters, the Takeuchi Training Center will now be the site of sales and technical instruction for the company’s salespeople, dealer principals, dealer technicians and corporate dealer trainers. The facility’s larger classrooms and additional staff will give Takeuchi the ability to increase class capacity and add more service training classes over the coming months. After Takeuchi-US President Jeff Stewart welcomed guests, Pastor Jeff Williams of Southside Church led the invocation. Stewart then recounted Takeuchi’s expanding footprint at the site in Jackson County, Ga. After purchasing nearly 10 acres in 2020, Takeuchi expanded its U.S. campus to approximately (L-R) are Keith Kramlich, Takeuchi-US product and training manager; Jeff Stewart, Takeuchi-US president; Tom Crow, chairman of the Jackson County 44 acres. Now with the addition of the (GA) board of commissionnew Training Center, the campus ers; and James Tipton of includes two buildings that together Tipton Construction. provide 500,000 sq. ft. of space. “We’re very thankful for the support Located next door to the and leadership we’ve received from our company’s headquarters, shareholders and from Mr. Takeuchi the Takeuchi Training and his family,” Stewart said. “This is Center will now be the site the second building we’ve erected here of sales and technical in the past two years, and altogether, instruction for the compathis property represents $9 million in ny’s salespeople, dealer investment and growth in Jackson principals, dealer techniCounty. Takeuchi-US is pleased to concians and corporate dealtribute to Jackson County’s infrastrucer trainers. ture, and we’re excited to be able to provide even more comprehensive training to our dealers and others who support our equipment here in the U.S. and worldwide.” see TAKEUCHI page 100

The facility’s larger classrooms and additional staff will give Takeuchi the ability to increase class capacity and add more service training classes over the coming months.

Courses that will be offered at the Takeuchi Training Center include instructor-led, intermediate-level technical trainings for both compact track loaders and compact excavators with simultaneous classes starting in May 2021.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 35

208 Holland Road Brimfield, MA 01010

Sales Contact: R.J. Poirier rjpoirier@rjpoirier.com 413-245-3882 Fax: 413-245-3522

www.rjpoirier.com

(2) 2010 CAT 773F, Good Tires, Dual Slope ................CALL (2) 2015 CAT 988K, 9 Yd, High Lift, 50% Tires ..........CALL (2) 2016 CAT 980M, Agg Handler, GP, Low Hrs ..........CALL 2011 CAT D8T, 8U w/Twin Tilt, S/S Ripper ..................CALL 2016 CAT D9T, 9SU ....................................................CALL 2013 CAT 980K, GP, 80% L-5’s ..................................CALL


Page 36 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doosan Announces Its Top 10 Equipment Dealers of 2020

Top-performing Doosan dealers are offered a selection of several incentives that they may choose from, which will improve their profitability when selling and servicing Doosan equipment.

Call For Price 35 West Route 70 Marlton, NJ 08053

856-983-0111 www.cherryvalleytractor.com

Deacon Equipment Co. CALL: 888-233-2266 Located In: Bloomsburg, PA

Doosan Infracore North America LLC announced its top-performing dealers of 2020. The top 10 dealers are among more than 160 Doosan equipment dealers in North America. Doosan annually recognizes its heavy equipment dealers that have excelled in providing top-level performance in sales, parts and service to the customers in their respective markets. The top 10 Doosan dealers of 2020 include the following enterprises (headquarters in parentheses): • Barry Equipment Co. (Webster, Mass.) — 4th consecutive year • Bobcat of Mandan Inc. (Mandan, N.D.) — 3rd consecutive year • Brown’s Industrial Sales (Lloydminster, Alberta) • CG Equipment (Guelph, Ontario) — 2nd consecutive year • Coastal Machinery (Pensacola, Fla.) — 2nd consecutive year • Equipment East LLC. (Dracut, Mass.) — 4th consecutive year Retirement Sale • G. Stone Commercial Division (Middlebury, Vt.) • Hartington Farm Services Ltd. (Hartington, Ontario) • Theco Inc. (Big Lake, Minn.) • Wilson Equipment (Central Point, Ore.) — 3rd consecutive year “There are four dealers joining this list for the first time, which is reflective of their hard work growing the Doosan brand in their regions,” said Todd Roecker, Doosan director of dealer management and marketing. “The word is out about Doosan equipment. We continue to attract new customers and top-performing dealers in North America.” Top-performing Doosan dealers are offered a selection of several incentives that they may choose from, which will 2001 Cat 950G, 6634 hrs, Owned since New $73,500 improve their profitability when selling and servicing Doosan equipment. In addition, Doosan North American leadership may look to these dealers for valuable input 2003 Cat 938G II, regarding Doosan initiatives and direction as they represent 4190 Hrs, the dealer network. Owned over 17 years For more information, visit na.DoosanEquipment.com.  $69,500

2001 Cat 966G, 6775 Hrs, Owned over 7 years Ford F750 Mechanics Truck, C7 Caterpillar diesel engine, 7-speed manual transmission, 217,000 miles, 11-foot Stellar box with tool drawers, 12,000 lb Stellar crane, Hydraulic powered air compressor, 26,000 GVW rating, Well maintained, excellent condition..........................................$65,500 Exclusive Morbark and Rayco Dealer

Visit: www.deaconequipment.com

All linkages, center pins and transmissions of above loaders in excellent condition. Engines no blow by.

Available Soon: All machines owned by MG Equipment for Min 7 years 84 in. Dynapac Roller, 3450 Hrs, Cummins Engine Cat D5-C III Hyst, 2632 Hrs, 6-way Bl, Bought New Cat D6RXL, 2700 Hrs • Cat 950H, 4691 Hrs Cat IT38G • 2005 Cat 928G, $36,500 24x36 Jaw Crusher on Tracks

Phil • 413-427-7171


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 37

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Case 980B Excavator, 1:35 scale - $150

Caterpillar 226B2 Skid Steer Loader w/work tools, 1:32 scale - $50

Doosan P185 Air Compressor, 1:24 scale - $75

Caterpillar D7E Track-Type Tractor, 1:50 scale - $115

John Deere 850J Dozer, 1:50 scale - $60

Ford 555A Backhoe/Loader, 1:32 scale - $50

Komatsu WB140 Backhoe/Loader w/ Attachments, 1:50 scale - $85

Caterpillar 631E Motor Scraper, 1:50 scale - $50

Caterpillar D10N Track-Type Tractor, 1:50 scale - $50

Allis Chalmers TS300 Cable Operated Motor Scraper, 1:50 scale - $110

Caterpillar D4,2T Crawler w/Letourneau Blade and Hyster Winch, 1:16 scale - $235

Bobcat 7753 Skid Steer Loader, 1:25 scale - $50

International TD-24 w/ Cable Blade, 1:25 scale - $140

Caterpillar 12G Motor Grader, 1:50 scale - $50

Shipping and Handling Included

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $225

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $225

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.


Page 38 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Northeast A. Montano amontanoco.com Saugerties, NY 845-247-0206

Lorusso Heavy Equip, LLC lhequip.com Walpole, MA 508-660-7600

TB Equip & Rental tbequipment.net Bangor, ME 207-262-0014

All Island Equip Corp allislandequipment.com West Babylon, NY 631-643-2605

Modern Group Ltd. moderngroup.com Bristol, PA 800-866-3376 Allentown, PA 610-398-1101 York, PA 800-866-3376 Edison, NJ 800-866-3376 Hasbrouck Heights, NJ 201-288-1441

Tracey Road Equip, Inc. traceyroad.com Watertown, NY 315-788-0200 Albany, NY 518-438-1100 Binghamton, NY 607-775-5010 Syracuse, NY 315-437-1471

Butler Equip butlerequip.com West Hartford, CT 860-233-5439 Chappell Tractor chappelltractor.com Milford, NH 603-673-2640 Brentwood, NH 800-616-5666 Concord, NH 800-358-6007 Correlli, Inc. Dundalk, MD 443-503-5641 George & Swede georgeandswede.co Pavillion, NY 585-584-3425 Highway Equip Co. highway-equipment.com Zelienople (Pittsburgh), PA 724-452-7800 Dubois, PA 814-371-3600 Millstone TWP, NJ 732-446-7600 Kahn Tractor & Equip Inc. kahntractor.com N Franklin, CT 860-642-7596 hceamericas.com

Pete’s Equip Sales & Rentals Inc. petesequipmentvt.com Morrisville, VT 802-888-5138 Quality Fleet Service, Inc. qualityfleetservice.com South Hadley, MA 413-213-0632 Seaview Equipment seaviewequipment.com Bridgeport, CT 203-330-0130

West Virginia Tractor Co. wvtractor.com Charleston, WV 304-346-5301 Whited Equipment whitedtruck.com Auburn, ME 207-786-3673 Presque Isle, ME 207-764-7300 Saco, ME 207-391-6250


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 39

READY TO OUT-WEIGH THE COMPETITION

Hyundai wheel loaders come standard with an auto-weighing system that weighs accurately to within plus or minus 1%. With better payload management, you can operate more efficiently and maximize profitability.

hceamericas.com


Page 40 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

N.Y. Pushes Skyline-Altering Penn Station Real Estate Plan New York Gov. Andrew Cuomo is Vornado Realty Trust rendering trying to push through a city-chang- A rendering of the proposed new New York skyline via a developer ing land deal that would reshape linked to the Empire Station Complex proposal. Manhattan’s skyline. And the project’s detractors, until very recently, were few and relatively silent. How is he doing it? With his stillconsiderable political muscle and an almost irresistible carrot: the dream of finally fixing everyone’s least favorite transit hub — Penn Station. The Empire Station Complex plan sets out to eventually overhaul the transit hub with revenue generated by a massive real estate deal in the surrounding blocks. A key hurdle for the project, at least in the short-term, rests in the state budget negotiations as Cuomo tries to ram a $1.3 billion bond deal past some reluctant lawmakers. The Empire Station proposal would be “generation-changing” not just for Midtown, but for all of Manhattan, said State Sen. Liz Krueger, who opposes the project and is working to remove it from this year’s state budget. The vision includes bringing 10 new large-scale buildings — housing offices, retail and residential spaces — to Midtown by 2038 in an area dubbed “The Penn District” by project developers. At least one of the proposed towers, named PENN 15, would be comparable to the size of the Empire State Building, according to renderings by Vornado Realty Trust, the group that controls a majority of the eight sites and plans to develop the area, Tom Wright the state’s General Project Plan revealed. Regional Plan Association Vornado chairperson Steven Roth described Cuomo as “the master builder of our generation” in a February earnings call Tom Wright, president of the Regional Plan circumvented city approval but dissolved to investors. Association (RPA) and member of the two years ago amid a wave of fierce opposiEmpire Station Complex community advi- tion. ‘This Is City-Making' sory committee. “This is for generations to One big bone of contention on the All told, the 20-million-sq.-ft. project come.” Amazon plan for Council Speaker Corey would add more space to the city than All of this would be approved not through Johnson and other local officials was the Hudson Yards’ 18 million sq. ft. — and be the typical city-led land use review process, state stomping on the Council’s decisionfive times as large as the never-built Amazon but via the ESD. The Cuomo-controlled making power over real estate development. headquarters in Queens. One portion of the entity has the authority through the 1968 Johnson also recoiled when Cuomo tried redevelopment, the Moynihan Station, Urban Development Corporation Act to to push a similar Penn Station plan in 2018, opened earlier this year. make sweeping changes to the urban land- saying, “It’s not fair to this city, which must Supporters tout the project as key to the scape without city approval — if the state be able to control its destiny.” Manhattan city’s COVID comeback, even as the pan- determines an area to be blighted. Borough President Gale Brewer called the demic has devastated the Manhattan office In the Empire Station project plan, ESD governor’s move “a power grab.” market. found the area around Penn Station to be Yet until recent days the response to the The Midtown project also would allow “significantly underutilized and character- Empire Station plan has been minimal, with the state to use eminent domain to raze 50 ized by blighted and substandard condi- some local officials known for their vocal buildings to make way for new tracks and tions,” it wrote. opposition to the Amazon deal staying quiet capacity to be added to Penn Station in the — or even signaling a willingness to play block directly south of its current location, A Letter to Cuomo ball. according to the proposal. The project’s scope and process mirrors Johnson and Brewer, along with local “This is not just a project. This is city- other controversial city projects, such as the state Sen. Brad Hoylman, Sen. Robert making. This is on such a huge scale,” said ill-fated Amazon headquarters — a deal that Jackson, Assembly member Dick Gottfried

“This is not just a project. This is city-making. This is on such a huge scale. This is for generations to come.”

and Congressional Reps. Jerold Nadler and Carolyn Maloney, serve on an ESD-organized advisory committee. Recently, they all signed a letter to the governor urging the state to give more time and consideration to the community. The two local community boards that span the project’s footprint did the same. “We cannot have a plan for the area around Penn Station and not have a clear understanding, let alone agreement, on what happens to Penn Station,” read the letter written by the elected officials to Cuomo. Soon after, ESD pushed a public hearing on the project from March 29 to May 12. In a letter to the elected officials April 1, the head of ESD committed to working with local lawmakers to create more opportunities for input — including a briefing on the plan and a meeting with the Metropolitan Transportation Authority (MTA). “The ESD team will work with you on a schedule that provides multiple opportunities for public input over the coming months, in addition to weekly [Community Advisory Committee] working group meetings,” said ESD President and CEO Eric Gertler in a letter obtained by The City. ‘You Need a Discussion’ Some Manhattan officials signaled that working with ESD and the governor is not off the table. see PLAN page 50


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 41


Page 42 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 43

0% % FOR

60 MONT M THS ®

PLUS S A CAT CVA TTake ake Advantage Advanntage Of One Of This Y Year’ ear’s Best Offers

T MILLTTON CCAAAT ®

nd hassle-free. Because your business never stops, we wa ant owning new Cat compact equipment to be simple and Right now, youu can take advantage of low interest rates with unmatcheed support from your local Cat at dealer. dealer Plus, with a Cat Custtomer Value Agreement, youu get 3-year comprehensive coverage c and up to 50% longger component life with the usse of genuine Cat parts that are a conveniently provided forr planned maintenance. Thiss finance rate can also be appplied to attachment purchasses, helping you get even mo ore done for less. Low innterest rates + Cat CV VA A + Firs First-inst-inclass service s and support pp = The riight g time to call your Northeast Cat De ealerr.. Learn more at NECatDealers.com/finance.

CAT MILLTON CA

.O. PPEENNN H.O

D CLEEEVVVEEELAN S EY, INNC. THEERR FOOLEEY BROTH

3 CONV

Since 1923

SINCE 1948 Cleveland Brothers

SINCE 1957 Foley, Incorporated

SINCE 1923 H.O. Penn Machinery

SINCE 1960 Milton CA AT T

www.clevelandbrothers.com

www.foleyinc.com

www.hopenn.com

www.miltoncat.com

Serving Pennsylvania and northern West Virginia

Serving New Jersey, easternn Pennsylvania, northern Delaware and Staten Island

Serving Connecticut and southern New York

Serving Massachusetts, Maine, New Hampshire, Vermont, Rhode Island, and Upstate New York

844-720-4CA ATT

732-885-5555

844-CA AT T-1923

866-385-8538

®

*Offer valid from February 1, 2021 through July 31, 2021 on new small and compact Cat machines sold or leased by participating Cat dealers to customers in the USA or Canada. Purcchase or lease must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Payments based on 60-month lease or loan. The offered Cat Customer Value Agreement (CVA) includes 3 maintenance parts kits (exception: small wheel loader includes 6 kits); TA1 TA1 equipment inspection; Product Link ; and a 3-year/3,000-hour Powertrain, Hydraulics and Technology Equipment Prootection Plan (EPP); and final drive oil only for compact track loaders and mini excavators. The maintenance parts cover the first 1,500 hours (estimated 3 years, 3,000 hours for small wheel loader) of machine utilization. The kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, S S·O·S O S and fluids. fl Payments do not include taxes, freight, set set-up, up, delivery, document fees, inspections, additional options ptions or attachments. Offer may change without wit prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details. TM

SM

©2021 Caterpillarr.. All Rights Reserved. CA AT T, CA CATERPILLAR, LET’S DO THE WOR RK, their respective logos, “Caterpillar Corporate Yellow,” the “Power Edge” and Cat “Modern Hex” trade de dress, as well as corporate and pr product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.cat.com / www.caterpillar.com m


Page 44 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Danuser Expands to Support Construction Segment A multiyear expansion program is currently under way at Danuser, a manufacturer of skid steer and tractor attachments, to meet growing demand from construction customers and other industry segments. Glenn Danuser, co-owner and a fourthgeneration leader of the family-owned company based in Fulton, Mo., said the expansion program is designed to help streamline production, improve cost control and increase overall efficiency. “In addition to keeping pace with current orders, we will have new products coming out soon, including larger products, that require additional modern space,” he said. Danuser said the current phase of the expansion program is scheduled to be finished this year. It is a 6,500-sq.-ft. metal building to provide more space for storing finished inventory, with a capacity for 1,400 products. “The additional space will enable us to shorten product delivery time to our distributor/dealer network,” he explained. The new building is located approximately 4 mi. off-site on land that has been in the Danuser family for many years and was formerly used for a dairy farm. The expansion program began in 2014, consisting of a new 32,500-sq.-ft. addition connected to the company’s headquarters plant. That

space is primarily used for laser cutting, presswork, robotics, hand welding and receiving. The next phase, finished in 2019, involved construction of a new 11,600-sq.-ft. headquarters office building. The structure features flexible open office areas ringed by private offices and conference rooms, and a cafeteria that transitions into the existing manufacturing shop. Danuser said planning is expected to get under way for the final expansion phase early next year. That work will expand the company’s powder coating operation, manufacturing and additional warehousing space on the headquarters site. “We’re addressing the expansion needs of today as well as thinking about our needs for the future,” Danuser said. “The market for attachments has continued to grow, and a lot of companies are getting into the attachment sector. Our strength continues to be offering patented niche products and adhering to the same quality standards since our company was established over 100 years ago.” Danuser attachments include the EP Auger The expansion program began in 2014, consisting of a new 32,500-sq.-ft. addiSystem, Mega Mixer material handling bucket, tion connected to the company’s headquarters plant. The next phase, finished in 2019, involved construction of a new 11,600-sq.-ft. headquarters office Intimidator land clearing attachment and building. Planning is expected to get under way for the final expansion phase Hammer post driver and concrete breaker. For more information, visit Danuser.com.  early next year.

The new building is located approximately 4 mi. off-site on land that has been in the Danuser family for many years and was formerly used for a dairy farm.

High-Tech N.J. College Campus Nears Finish Line in July Students should be able to walk through the doors and into the light-filled, high-tech new campus of New Jersey City University (NJCU) in Oceanport beginning this July, said Michael Edmondson, the school’s director, during a tour of the facility on March 11. The former Fort Monmouth administration building known as Squier Hall remains a work in progress with multiple contractors working at full speed inside and out. Delays caused by COVID-19, including delivery of materials, prevented the school’s originally planned fall 2020 opening. Some 350 NJCU students currently attend classes at nearby Brookdale Community College in an arrangement that has been in place for 15 years, Edmondson said. That lease will end when NJCU students begin moving to the Oceanport campus this summer. A full launch is anticipated for early fall, he added. The school’s main campus is in Jersey City. “We hope to complete construction by the end of May,” explained Edmondson. “We can now advance our mission to provide a diverse population with an excellent education, targeting and better serving people in the four surrounding counties, including an estimated 100,000 veterans.” The school’s course offerings include nursing, cybersecurity, business, criminal justice, fire science and exercise science. NJCU will have 15 classrooms accommodating 30 stu-

dents each. A Nursing Education Center will include an intensive care unit and a skills lab with four beds for hands-on learning, along with a mock apartment where students will learn to help patients navigate their everyday lives. Behind one-way mirrors in an adjacent room, professors will use computers to create high-fidelity simulations and monitor students’ performance. Both NJCU’s nursing and cybersecurity courses have been nationally recognized for academic excellence. The college’s Professional Security Studies department received the 2020 ASTORS Homeland Security Award for Cyber Defense, National Security, and Intelligence programs, the only institution of higher education in the nation honored by the organization. Also, within the new facility, business students will be able to avail themselves of a computer lab containing a Bloomberg Terminal offering access to the stock market. A café, four lounges, a general computer lab, a quiet study room, faculty space and room for professional groups to hold catered events will all be part of NJCU’s first phase. “We hope chambers of commerce, state associations and law enforcement will hold seminars, classes and events here,” Edmondson said, adding there are opportunities for sponsorships of new spaces like

NJCU’s outdoor courtyard and back patio. “We are looking for donors who might want to dedicate these spaces to family or friends.” Some rooms in the refurbished building overlook Parker Creek, which borders a portion of the former U.S. Army post. As part of its purchasing agreement, NJCU will construct a promenade along its property that will connect with sections being built by other developers along the banks. The 72,000-sq.-ft. building on 22 acres was constructed between the 1930s and 1950s, according to Edmondson. Del-Sano Contracting Corp., from West Long Branch, N.J., is the builder of the $23 million NJCU project. Several small obsolete buildings on the property will be demolished before the enterprise is completed. The original plans for NJCU on Fort Monmouth called for a residence hall, another academic building, an athletic center, a performing arts center, a parking garage and athletic fields. Those plans were scaled back following input and objections from Oceanport residents and some officials. Mayor John “Jay” Coffey supports having a college within the borough’s borders. “Only the first phase was approved,” Coffey said, adding, “Further development would be years down the line. Having a college campus on this site is a benefit to Oceanport. It

enhances the entire fort project and will reflect positively on Oceanport as a place to live and work. Additionally, it will pay real estate taxes. A school that pays taxes is a unicorn.” Bruce Steadman, executive director of the Fort Monmouth Economic Revitalization Authority (FMERA) added, “We look forward to the restoration of one of the fort’s historic assets, Squier Hall, and the opening of NJCU. [The] new campus will provide an affordable and fulfilling education for students interested in completing a four-year degree. [It will grow] the talent base in Monmouth County, as well as provide career opportunities through the fort’s thriving businesses and organizations in the future.” Opened in 1929 as the New Jersey State Normal School, NJCU was renamed New Jersey State Teachers College in 1935, and Jersey City State College in 1958. Its current name change occurred in 1998. The 1,126-acre Fort Monmouth, which spans portions of Eatontown, Oceanport and Tinton Falls, has been undergoing an extensive mixed-use redevelopment since it was closed by the Army in 2011. Approximately three quarters of the properties have been sold, are under contract or in the negotiations process. More than 25 parcels have been sold to date. Some businesses and residences have already been completed and are operating. More are expected to open later this 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 45

www.andersonequip.com NEW YORK Buffalo, NY 716/877-1992 Henrietta, NY 585/334-6770 Syracuse, NY 315/463-8673 Albany, NY 518/785-4500 Watertown, NY 315/788-5512 Endicott, NY 607/748-3400 Olean, NY 716/372-8822

PENNSYLVANIA Pittsburgh, PA 412/343-2300 Clarion, PA 814/226-4100 Clearfield, PA 814/765-5311 Somerset, PA 814/443-2867

NEW HAMPSHIRE Lancaster, NH 603/788-6595 Manchester, NH 603/627-7696

VERMONT East Montpelier, VT 802/223-9689

MAINE Bangor, ME 207/942-0177 Gorham, ME 207/591-5482

AUTOMA MAT TED TO MAKE THE PRODUCTION N YOU NEED

www.cn-wood.com Avon, MA 508/584-8484 Woburn, MA 781/935-1919

Whately, MA 413/665-7009 Johnston, RI 401/942-9191

Danbury, CT 203/743-0088 Newington, CT 860/665-7470 Laurel, DE 302/715-5382 Baltimore, MD 410/247-2100 South Plainfield, NJ 908/561-9000 Winslow Township, NJ 856/767-5900 Holbrook, NY 631/563-7600 Holmes, NY 845/878-4004

New York City, NY 718/626-3331 Pine Bush, NY 845/744-2006 Yonkers, NY 914/738-5100 Frackville, PA 570/874-6140 Harrisburg, PA 717/652-3190 Hatfield, PA 215/822-0145 State College, PA 814/308-5660 Wilkes-Barre, PA 570/824-9891

Want to make your next machine acquisition really count? counnt? Komatsu’s lineup of aautomated excavators, including thee all-new PC360LCi-11 and PC490LCi-11 490LCi-11 feature a revolutionary, faactory integrated, machine control system. The exclusive intelligent ligent Machine Control technology chnology lets operators focus on moving oving materials efficiently, without worrying about digging tooo deep or damaging the target surface. Contact your Komatsu distributor tributor to learn how you cann hit pay dirt today with Komatsu innovation. novation.

komatsuamerica.com merica.com ©2020 Komatsu America ca Corp. All Rights Reserved Photograph may show optional equipment.

020


Page 46 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DA Collins, Link-Belt Help Reopen Stuck Erie Canal Lower Lock Gate ANDERSON EQUIPMENT CO. CANAL from page 1

be repaired and improvethe river. There are four gates ments and maintenance could on a lock. This particular one be done. Next, they repaired has two upstream and two the damaged pivot; put it downstream up the lock. back where it needed to be; They’re big doors that allow finished up some additional boats to come in and out and repairs on the gate; and then then close to a center point lifted the gate back up with once the boats are inside.” the crane. The workers The Erie Canal is typically hooked up all the machinery open from May until late to it and got it operational. November or early December. Later, they reversed the It allows boating and commuprocess. They took the crane nity traffic, barges and tug apart in pieces out of the lock boats to go along the canal chamber, simplifying things. system during decent weather “It took two days for our between those months. A nine-man crew to remove the majority of the repair work to crane completely from the the waterways must be done lock chamber,” said Frank in the winter when the system Staley, site superintendent of is closed. DA Collins. “It was disas“There was trouble with sembled in pieces. The larger one of their lower lock gates,” one sat on top of the lock Perry said. “The steel gate is chamber while the crew disbasically 23 feet wide by 50 assembled the crane that set feet tall. The gate couldn’t be the gates down inside the opened or closed by the chamber. Lifting out the machinery because it had setcrane from down inside the tled for some unknown realock was one of the final son. Since it was underwater, Recently, DA Collins and Link-Belt Cranes joined steps. Once the equipment forces to pick Collins’ 200-ton Link-Belt crawler was demobilized, the project you couldn’t see it.” DA Collins was called to crane out of the Lock 7 chamber in Niskayuna, N.Y. is complete. Now that our assist with addressing the situmajor work is done, we’ll ation. Because there was still water on Link Belt 275-ton rubber tire all-terrain send the 200-ton to other projects in the upstream and downstream sides of crane. The crane was mobilized to the New York. The 275 is going to another the lock, a cofferdam was installed. A site and then we mobilized a Link Belt job in Gansevoort, N.Y. We’ve also cofferdam is an enclosure built within a 248, which is our 200-ton crawler been doing a lot of work down at the body of water to allow the enclosed crane. Next, we used the 275-ton crane. lock this year. Some major work needarea to be pumped out. The pumping We put it together in pieces in the lock ed to be done. It was more work than creates a dry working environment so chamber.” anticipated. but that’s OK.” The crew was able to walk the the work can be carried out safely. Perry had nothing but praise for a job Cofferdams are commonly used for crawler crane in the lock chamber to well done. construction or repair of permanent the gate that had settled. They lifted the “A lot of talented individuals made dams, oil platforms, bridge piers within structure and were able to lay it flat this come about. They were involved down inside the lock so the gate could with this project at the DA Collins level or over water. Pumps were installed and helped make it hapinside the lock to look at what pen. There were many the problem was in a dewamoves and coordination. tered condition. The gate sat A lot of trucking because on a pivot point that had some the crane has six to seven undermining and it rotated. parts. Multiple pieces of The gates settled and it couldequipment needed to be n't be opened or manipulated. mobilized and various “The gate structure itself crews worked on it togethweighs 53 tons and is heavy er to complete the projand tall. In order to get at the ect.” lock gate to lift it, there’s a lot In spite of the threat of of sloping terrain, making it 45 mph winds, Staley calls difficult to get at from an it a win-win. “We’re all access point. A crane can’t just Crews lifted the structure and were able to lay it flat here safe and sound. The drive in there and easily hook down inside the lock so the gate could be repaired and sun is shining. Life is on to it. DA Collins used their improvements and maintenance could be done. good.”  CEG

1000 Washington Pike, Bridgeville, PA 15017 412-343-2300 Pleasant Valley, WV 304-366-3075 South Charleston, WV 304-756-2800 www.andersonequip.com

TRACEY ROAD EQUIPMENT East Syracuse, NY 315-437-1471 Kirkwood, NY 607-775-5010 Henrietta, NY 585-334-5120 Adams Center, NY 315-788-0200 Utica, NY 315-765-8746 • 800-872-2390 www.traceyroad.com

HIGHWAY EQUIPMENT COMPANY Zelienople, PA 724-452-7800 Dubois, PA 814-371-3600 McKean, PA 814-476-7755 Millstone Township, NJ 732-446-7600 www.highway-equipment.com

ALL ISLAND EQUIPMENT 39 Jersey Street West Babylon, NY 11704 631-643-2605 www.allislandequipment.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 47

WESTCHESTER TRACTOR

BASCHMANN SERVICES, INC.

COMPANY WRENCH, LTD.

ROBERT H. FINKE AND SONS, INC.

Brewster, NY 845-278-7766 www.wtractor.com

Elma, NY 888-655-1101 www.baschmann.com

Williamstown, NJ 856-404-9618 www.companywrench.com

Selkirk, NY 518-767-9331 www.finkeequipment.com


Page 48 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

REACCH NEW W

HE EIGH T TS IN PRRODUCTTIVI Manitowoc crawler c cranes are built to unsurpassed productivity and value on challenging jobsites. j Manitowoc delivers: d > Cranes ranging from 73 t (80 ( U USt)) to 23 > Capacity-enhancing VPC-MAX X® techno attachmen nts > Optional lo ong-reach booms, fixed jibs, extended u upper boom points > Optional 3..5 m wide boom inse erts for M

man nitowoc.com woc.com

www.hoffmanequip.com

300 South Randolphville Rd. at Route 287 Piscataway, NJ 08854 800-446-3362 22 Peconic Ave. Medford, NY 11763 631-207-2900 1144 Zerega Ave Bronx, NY 10462 718-822-1180

www.shawmutequipment.com

1330 Hurffville Rd. Deptford, NJ 08096 856-227-6400

20 Tolland Turnpike Manchester, CT 06042 800-829-4161

1440 Route 9W Marlboro, NY 12542 845-236-3000

136 Eastman St. South Easton, MA 02375 877-526-9213

120 Gordon Drive Lionville, PA 19341 610-363-9200

Shawmut Equipment of Canada, Inc. 318 Park Road Elmsdale, NS B2S 0G2 902-883-7450

www.stephensonequipment.com

Philadelphia, PA 800-220-4033

Pittsburgh, PA 800-692-7600

Harrisburg, PA 800-325-6455

Syracuse, NY 800-368-6455

Wilkes-Barre, PA 866-667-6756

Albany, NY 518-357-2200


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 49

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Absolute Equipment

www.absoluteequip.com PENNSYLVANIA Pittsburgh (412) 931-6655 (866) 931-6655

Hoffman Equipment www.hoffmanequip.com NEW JERSEY Piscataway (732) 752-3600 Deptford (856) 227-6400 NEW YORK Bronx (718) 822-1180

Marlboro (854) 236-3000 Medford (631) 207-2900

Highway Equipment & Supply Co. www.hwyequip.com PENNSYLVANIA Drums (570) 788-1127 Harrisburg (717) 564-3031 Ephrata (717) 859-3132 Lock Haven (570) 769-1070

Tyler Equipment Corporation

www.tylerequipment.com

Walter S. Pratt & Son

CONNECTICUT Berlin (800) 352-4473 Parts: (860) 356-0848 Fax: (860) 828-6727 MASSACHUSETTS East Longmeadow (800) 292-6351 Parts: (877) 255-6351 Fax: (413) 525-6840

PENNSYLVANIA (610) 363-9200

©2019 Doosan Portable Power. All rights reserved.

MAKE POWER MOVES.

www.prattandsons.com NEW YORK Rensselaer (Albany) (518) 465-1549

Washington Air Compressor Rental Co. www.washair.net MARYLAND Frederick (301) 662-7711

Hyattsville (301) 277-1300

DISTRICT OF COLUMBIA Washington (202) 635-1500 VIRGINIA Chantilly (703) 742-6200


Page 50 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

‘Penn District’ Development Would Be Larger Than City’s Hudson Yards Area PLAN from page 40

“You need a discussion. You need a little bit more time. I’m not saying that you have to stop it all,” Brewer said. Johnson is not necessarily opposed to the current plan, but stressed that more interaction with locals is needed, said a spokesperson. “The Speaker is concerned about the limited community engagement thus far and is working with other elected officials and community members to make sure that the process is more inclusive moving forward,” explained the spokesperson, Jennifer Fermino. “We can’t re-imagine Penn Station and the Penn District without the community at the table.” Hoylman, who is running for Manhattan borough president, said he opposes the current plan and described its approval process as “a complete subversion of the city’s authority to control its destiny.” Yet he added he’s worried that the pandemic has made it hard to say no to this type of deal to help revive the city. “This is going to be the pressure on the entire borough in these years following the pandemic — that any economic development, any real estate project is good because people are desperate to look like they are investing in jobs and jumpstarting the regional economy,” he said. Governor ‘Pushing Hard’ As lawmakers haggle over the $200 billion state budget, funding for the Empire Station is emerging as a sticking point. The governor is “pushing hard” on lawmakers to approve bonding authority for $1.3 billion for the Empire Station, according to legislative sources. That funding would be geared toward the railroad expansion acquisition, said an ESD official. The bond deal would show the federal government that the state is ready and willing to contribute its share toward the project, the official added. Wright said the $1.3 billion can be viewed as “a down payment on what will probably cost a lot more.” “To my way of thinking, that was the state showing that it really [and] truly was committed to fixing Penn Station,” he continued. “Anybody who works with the feds knows, [they] are going to

be looking for a firm local commitment.” But legislators are balking at the measure, seeking to remove it over lack of transparency and scant details over the benefits to Penn Station. “There’s no connection between this proposal and Penn Station other than it will be 10 giant buildings, super-talls, all surrounding that specific area,” Krueger said. She added that there’s “no evidence” to support the governor’s proposal that revenue from the development would help fund the new tracks.

“You’re not going to find one person on earth telling you that Penn Station is fine the way it is.” Layla Law-Gisiko Community Board 5 Member

Unanswered Questions The pandemic may be partly to blame for the project flying under the radar for many New Yorkers. Cuomo first unveiled a plan to overhaul Penn Station and the area around it in 2016. He introduced the concept for the current proposal in his 2020 State of the State address — delivered just weeks before COVID-19 arrived in New York — before state officials quietly began initial review procedures for the plan last summer. Getting any specifics from ESD about the project over the past year has been tough, said Lowell Kern, chair of Manhattan Community Board 4. “It was presented to us as a fait accompli. And that’s not how we do business,” he said. “This is a real estate development plan. That is the tail wag-

ging the dog. This is supposed to be about redeveloping the rest of Penn Station. And there’s no Penn Station in the plan.” Though the stated goal of the Empire Station proposal is to generate revenue to pay for eventual expansion and rebuilding of Penn Station, details in ESD’s 23-page General Project Plan on how exactly that will happen are sparse. The project plan also lays out a framework for the state to use the value of as-yet-unbuilt real estate to generate money to fund future improvements to Penn Station and the surrounding area. But in a meeting with Manhattan Community Board 5 in early March, ESD officials could not answer questions about exactly how that would happen. The document acknowledges that “substantial improvements to the existing Penn Station” will be outlined in an as-yet-uncompleted overall plan created at some point by the Metropolitan Transit Authority (MTA), Amtrak and New Jersey Transit — all three agencies that have jurisdiction over pieces of the rail hub. Fear of Repeating History Community Board 5 member Layla Law-Gisiko, a vocal critic of the project, said having a comprehensive plan — and getting all the stakeholders involved together to hammer out the details — “may be painful,” but is the only way forward. “You’re not going to find one person on earth telling you that Penn Station is fine the way it is,” she said. “It’s easy to get people to buy into, you know, ‘We need to fix Penn Station.’ But then the question becomes, how do you fix Penn Station?” For her, the specifics are critical, especially on the site of the old Penn Station, a jewel of the city that galvanized preservationists and planners when it was torn down beginning in 1963. “We are in this situation because in the 1960s, some stupid decision was made to demolish Penn Station and just throw it in the marsh in Secaucus,” she said, referring to parts of the famous building that were dumped in the Meadowlands of New Jersey. “If we let that go, it’s going to repeat itself.” 

All Island Equipment 39 Jersey St. • West Babylon, NY 11704 631-643-2605 www.allislandequipment.com

ATS Equipment, Inc. 33 Locust Street • Boston, MA 02125 617-825-3600 487 Washington Street, Route 20 • Auburn, MA 01501 508-832-8500 51 Fall River Avenue • Rehoboth, MA 02769 508-379-6200 ww.atsequipment.com

Baschmann Services Inc. 1101 Maple Road • Elma, NY 14509 888-655-1101 www.baschmann.com

Chappell Tractor 454 Route 13 South • Milford, NH 03055 800-698-2640 251 Route 125 • Brentwood, NH 03833 800-616-5666 391 Loudon Rd. • Concord, NH 03301 800-358-6007 www.chappelltractor.com

Highway Equipment Company 615 State Route 33 • Millstone Township, NJ 08535 732-446-7600 www.highway-equipment.com

Westchester Tractor 60 International Blvd. • Brewster, NY 10509 845-278-7766 www.wtractor.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 51

ALL THE TOOLS YOU NEED PARTS | SUPPORT SERVICES | CONSITE | GLOBAL E-SERVICE | SERVICE CONTRACTS | REMANUFACTURING | TRAINING

Hitachi’s after sales solutions provide you with all the tools you need to manage your total cost of ownership quickly and easily, whenever and wherever you are. Utilize Hitachi’s Technology Programs and Apps to: ࠮ ,_[LUK LX\PWTLU[ SPML ࠮ 4HUHNL WYL]LU[H[P]L THPU[LUHUJL THJOPUL LɉJPLUJ` HUK VWLYH[VY WYVK\J[P]P[`

࠮ 4HUHNL `V\Y VWLYH[PUN JVZ[Z M\LS JVUZ\TW[PVU HUK VWLYH[VY LɉJPLUJ` PU [OL ÄLSK

*VU[HJ[ `V\Y SVJHS /P[HJOP ^OLLS SVHKLY KLHSLY VY ]PZP[ \Z H[ OP[HJOP^OLLSSVHKLYZ \Z `V\Y[VVSZ [V SLHYU TVYL HIV\[ [OL MVJ\ZLK /P[HJOP HWWYVHJO [V Z\WWVY[PUN `V\ `V\Y I\ZPULZZ HUK `V\Y /P[HJOP ^OLLS SVHKLYZ

Contractors Sales Co. Inc. 121 Karner Road Albany, NY 12212-2010 888-468-5479 1283 Dolsontown Road Middletown, NY 10940 845-956-0222 www.contractorssales.com

Elliott & Frantz, Inc. 450 E. Church Rd. King of Prussia, PA 19406 610-279-5200 Jessup, MD 410-792-9134 Hagerstown, MD 301-733-8100 Harrisburg, PA 717-652-5430 Delmar, DE 302-846-3033 www.elliottfrantz.com

Medico Construction Equipment Inc. 1500 Highway 315 Wilkes-Barre, PA 18702 570-825-7711 3647 Shafers Schoolhouse Road Stroudsburg, PA 18360 Dealer Imprint Area 570-420-0877 www.medicoce.com

REPUTATIONS ARE BUILT ON IT A FULL LINE OF WHEEL LOADERS

• 14 Models • 25 HP – 520 HP

Hitachi Construction Machinery Loaders America Inc. hitachiwheelloaders.us/yourtools

Tracey Road Equipment, Inc. 6803 Manlius Center Road 19598 Cady Road East Syracuse, NY 13057 (Exit 44-Watertown Center off I-81) 800-872-2390 Syracuse Adams Center, NY 13606 888-335-0200 Watertown 1523 Route 11 North Kirkwood, NY 13795 9598 River Road • Marcy, NY 13403 800-370-9488 Binghamton 800-872-2390 300 Middle Road • Henrietta, NY 14467 866-950-6210 Rochester www.traceyroad.com


Page 52 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Associations Urge Administration to Address Cost Issue COSTS from page 1

More than three-fourths report projects canceled or postponed in the Of civil contractors who are conpast year. cerned about cost increases in the next That includes more than one out six months, the survey asked which of five with a 2021 project that has materials they are most concerned been canceled or postponed. about. Only one-fifth of respondents said “By far, steel is the material most they have won new projects or addfrequently selected by contractors,” ons to existing projects as a result of Civil Quarterly reported. “Nearly half the pandemic. [45 percent] are highly concerned Approximately a third of firms about the possibility of cost increases said business matches or exceeds for steel.” year-ago levels, while another third The price of steel was already high said it will take more than six months after the Trump administration’s 25 to reach that mark. percent tariff on foreign shipments. One-fifth of respondents to AGC’s Construction rebirth has sent costs survey said they don’t know. soaring. Contractors in the northeast are the The survey found there is also conmost pessimistic, followed by firms cern about the rising cost of pavement, in the south, reported AGC. concrete and aggregates as well as In the midwest, respondents are lumber and piping. split along the same lines as the full The National Association of Home survey, while respondents in the west Builders (NAHB), tracking lumber are more optimistic, on balance. prices, noted a jump from $500 per “Contractors from all regions, thousand board feet in October to AGC has pushed for the Biden administration to eliminate materials tariffs, address shipping backups and boost funding for new infrastructure. project types and firm sizes are more than $1,100 per in April. almost equally bullish about their hirNAHB reported the average price ing expectations over the next 12 The prevalence of those shortages varies by project type. of a new single-family home to increase by more than Approximately six out of 10 building contractors reported months,” reported AGC. $24,000 as a result. Roughly three out of five expect to add employees over the shortages of materials, equipment or parts. coming 12 months. Five out of 10 firms doing utility infrastructure or federal Left in the Dust Only 10 to 15 percent of firms in any category expect to According to the Associated General Contractors (AGC), and heavy construction and four out of 10 highway contracreduce their headcount. at the pandemic’s one-year mark, member construction firms tors saw shortages. “Contractors need Washington officials to cut tariffs and In contrast, approximately one out of three firms reported were fighting continued project deferrals and cancellations. address the shipping and supply chain problems driving costs This in addition to dramatically rising material costs and sup- any cost savings as a result of the pandemic. and contributing to project delays,” said Brian Turmail, AGC’s Most of those cited reduced travel costs, while only 5 perply chain headaches, the association reported in March. AGC pushed for the feds to eliminate materials tariffs, cent cited new or expanded use of jobsite techniques or tech- vice president of public affairs. “They also expect the President will keep his word and get significant new infraaddress shipping backups and boost funding for new infra- nologies. Half of the firms also blame backlogs or shutdowns at for- structure investments enacted as quickly as possible.” structure. “The survey results make it clear that the construction eign producers for backlogs and disruptions. see COSTS page 108 industry faces challenges that threaten to leave many firms and workers behind,” said Ken Simonson, chief economist of AGC. “Even as some parts of the economy are recovering or even thriving, the pandemic has left the supply chain for key construction components in tatters and undermined demand for a host of private-sector projects.” He noted that 93 percent of an association survey’s respondents report the pandemic has driven up their costs. Four out of five are spending more on personal protective equipment, sanitizers and other healthrelated expenses. More than half say that projects are taking longer than previously. “Costs and delayed deliveries of materials, parts and supplies are vexing many contractors,” said Simonson. Nearly 85 percent said costs have increased over the past year, and about three-fourths were experiencing project delays and disruptions. They blame shortages of materials, equipment or parts, and nine out of 10 cite backlogs and shut- At the pandemic’s one-year mark, AGC member construction firms were fighting continued project deferrals and cancellations, in addition to rising material costs and supply-chain headaches. downs at domestic producers and fabricators.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 53

IN YOU OUR WORLD,

BIG JO OBS NEED BIG MACHINES. E Expect big things ffrom the John Deere 850L Do ozer. Larger and more powerful than the previous K-Series model, m the 850L gives you 10-ppercent more horsepower andd 23-percent more torque for mass eaarthmoving. And with state-off-the-art controls, the usual D Deere arsenal of production-boosting hydrostatic advantages, a SmartGrade™ fully integratedd grade-control option, p and the choice of a Power-Angle-Tilt g (PA AT) or o Outside Dozer (OSD) blaade, you’ll y have the precision and performance you need to Run Y Your our World. W Stop by or call us today. CONNECTICUT

MAINE

NEW JERSEY

NEW YORK

NEW YORK

The W.I. Clark Company

Nortrax

JESCO, Inc.

Five Star Equipment, Inc.

Nortrax

Wallingford, CT 203/265-6781 Danbury, CT 203/775-1203 Plainfield, CT 860/546-4808 www.wiclark.com

DELAWARE JESCO, Inc. Middletown, DE 302/376-0784

MARYLAND JESCO, Inc.

Baltimore, MD 410/687-1700 Delmar, MD 410/546-1090 Frederick, MD 301/874-5500 District Heights, MD 301/909-7799 Waldorf, MD 301/861-2323

Hermon, ME 207-947-6786 Houlton, ME 207-532-6517 New Canada, ME 207-834-6701 Westbrook, ME 207-773-3777

MASSACHUSETTS Schmidt Equipment, Inc. North Oxford, MA 508/987-8786

North Billerica, MA 978/667-4345 Plymouth, MA 508/830-9997 No. Swansea, MA 508/379-9810 Springfield, MA 413/543-5595 www.schmidtequipment.com

118 St. Nicholas Ave. South Plainfield, NJ 908/753-8080 800/241-7070 1275 Bloomfield Ave. Fairfield, NJ 973/227-2221 800/321-8080 1790 Route 38 Lumberton, NJ 609/267-2020 888/217-0600 www.jesco.us

60 Paul Rd. Rochester, NY 585/235-3011 1653 NY Route 11 Kirkwood, NY 607/775-2006 284 Ellicott Rd. Orchard Park, NY 716/662-2191 6500 E Taft Road Syracuse, NY 315/452-4560

Clifton Park, NY 518-371-5111 Gouverneur, NY 315-287-0703

NEW HAMPSHIRE Nortrax

Pembroke, NH 603-225-2769

VERMONT Nortrax

JESCO, Inc.

497 Fishkill Avenue Beacon, NY 845/831-1800 800/724-0725 110 East Jefryn Blvd. Deer Park, NY 844-482-0910

Springfield, VT 802-885-6840 Williston, VT 802-658-2121 www.nortrax.com

PENNSYLVANIA Five Star Equipment, Inc. 1300 East Dunham Dr. Dunmore, PA 570/346-1701 46 Route 97 Waterford, PA 814/796-2663 2585 Lycoming Creek Rd. Williamsport, PA 570/494-4030 www.fivestarequipment.com

Plasterer Equipment Co., Inc. 2550 E. Cumberland St. Lebanon, PA 717/273-2616 800/225-4001 3215 State Rd. Sellersville, PA 215/258-5700 800/523-2209 400 Stoke Park Rd. Bethlehem, PA 610/867-4657 800/587-9790 640 Lowther Rd. Lewisberry, PA 717/938-6568 866/787-0001 www.plasterer.com


Page 54 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Despite Challenges of 2020, Buyers Products Expands Its HQ Buyers Products, a manufacturer in the work truck industry, is expanding its headquarters. The project includes 280,000 sq. ft. of warehouse space and is on track to be complete by the end of 2021. Despite the challenges 2020 brought, Buyers charged forward with the expansion. Company management knew that essential businesses across the country relied on its products to operate, and the new warehouse is a key part of ensuring those businesses have reliable access to the truck, trailer and snow and ice equipment they need. “We are one-hundred percent committed to getting our customers what they need,” said Gary Kadow, warehouse operations manager of Buyers. “We built our reputation on our ability to quickly and consistently deliver high-quality products at competitive rates, and that doesn’t change just because there’s a pandemic going on.” The new warehouse, combined with other investments Buyers has made in robotic welding, precision laser-cutting and fabrication automation, will allow the company to develop, manufacture and distribute equipment more efficiently. These advancements allow Buyers to stay competitive in a global economy while developing new equipment for work trucks, vans and trailers of all sizes. “We’re constantly looking for new challenges to tackle,” said Brian Seeley, operations manager of Buyers. “We ask our customers and the hard-working folks that use our equipment every day ‘What do you need?’ and then we use their answers to guide everything we do. ‘Good enough’ isn’t good enough — we want to be the definitive one-stop-shop for truck and trailer equipment.” In the last few years, Buyers has released a multitude of new products based on its conversations with dealers and end users. Two of the most exciting among these new releases are the SnowDogg VXXII 10.5-ft. v-plow and an extended line of backpack and L-pack truck tool boxes, according to the manufacturer.

Buyers Products, a manufacturer in the work truck industry, is expanding its headquarters.

The SnowDogg VXXII was a response to increasing market demand for a v-plow for Class 4-6 trucks. Buyers spent more than two years designing, testing and iterating before it landed on a design it was happy with. “It took a few tries, but it was worth it,” said Scott Moorman, director of snow and ice equipment of Buyers.

Despite the challenges 2020 brought, Buyers charged forward with the expansion.

“The VXXII is our biggest, strongest v-plow ever. I couldn’t be happier with the results, and I’m immensely grateful to our engineers, our field testers and everyone else who poured countless hours into this project.” The new backpack and L-pack truck tool boxes came from a similar origin; customers loved the existing Buyers offerings, but they needed additional options to cover different applications. They needed more sizes and more material and finish options. With those requests in mind, Buyers set its steel and aluminum manufacturing divisions, guided by product management and engineering, to work. The result is a massive influx of new styles with the strength and assortment of features that Buyers is known for. For more information, visit buyersproducts.com. 

“The VXXII is our biggest, strongest v-plow ever,” said Scott Moorman, director of snow and ice equipment of Buyers.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 55

MILTON CAT www.miltoncat.com Milford, MA 508-634-3400 Wareham, MA 508-291-1200 Cranston, RI 401-946-6350 Richmond, VT 802-434-4228 Scarborough, ME 207-883-9586 Brewer, ME 207-989-1890 Londonderry, NH 603-665-4500 Clifton Park, NY 518-877-8000 Syracuse, NY 315-476-9981 Batavia, NY 585-815-6200 Binghamton, NY 607-772-6500 North Reading, MA 978-276-2400

CLEVELAND BROTHERS www.clevelandbrothers.com Murrysvile, PA 888-232-2016 Harrisburg, PA 717-564-2121 Clearfield, PA 814-765-1611 Ephrata/Lancaster, PA 717-859-4905 Erie, PA 814-898-3388 Frackville, PA 570-874-3560 Indiana, PA 724-463-8743 Kane, PA 814-778-5250 Mansfield, PA 570-662-7171 Mount Pleasant, PA 724-696-4080 Pittston, PA 570-883-1044 Somerset, PA 814-445-7915 State College, PA 814-237-8338 Turbotville, PA 570-538-2551 Wilkes-Barre, PA 570-822-8141


Page 56 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

Highway Equipment & Supply Co. www.hwyequip.com Harrisburg, PA 717.564.3031 Drums, PA 570.788.1127 Ephrata, PA 717.859.3132 Lock Haven, PA 570.769.1070

Hoffman Equipment www.hoffmanequip.com Corporate Headquarters Piscataway, NJ 732.752.3600 Deptford, NJ 856.227.6400 Lionville, PA 610.363.9200 Bronx, NY 718.822.1180 Local Dealer Medford, NY 631.207.2900

Local dealer address 000.000.0000 www.localdealerweb.xx

Rudd

Local Dealer Local dealer address Pittsburgh, PA 412.741.1731 000.000.0000 Clearfield, PA 814.765.8500 Louisville, www.localdealerweb.xx KY 502.456.4050 www.ruddequipment.com

Charleston, WV 304.755.7788

Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx Tyler Equipment www.tylerequipment.com Local Dealer Local dealer East Longmeadow, MA address 413.525.6351 Berlin, CT 000.000.0000 860.356.0840 www.localdealerweb.xx Local Dealer AltaEquipNY.com Local dealer address Syracuse, 000.000.0000 NY 833-NY-ALTA-1 Albany, NYwww.localdealerweb.xx 833-NY-ALTA-2 Batavia, NY 833-NY-ALTA-3

GET IT DONE EFFICIENTLY WITH

THE PERFECT PAIR.

Local Dealer Local dealer address 000.000.0000 Woodcowww.localdealerweb.xx Machinery www.woodcomachinery.com Headquarters Woburn, MA 781.935.1919 Avon, MA 508.584.8484 Johnston, RI 401.942.9191

DEALER LOGO

The new Volvo EC950F crawler excavator and tried-and-true A60H articulated hauler were made for each other — and your profits. Together, they decrease loading passes to speed up cycle times — and they’re both protected by the industry’s best Lifetime Frame and Structure Warranty.

Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx Authorized dealer for Volvo Construction Equipment

You can move more material faster while lowering your costs. Contact your local [Dealer Name] location to learn how.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 57


Page 58 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


Pages 59-78

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Bagela Turns Millings Into Money for M.J.W. Services Josh Williams and Megan Hill had each grown up around the heavy equipment trades. In 2012, the husband and wife team started M.J.W. Services in Thomaston, Conn. Originally focusing on utility contracting, within a few years some other doors opened for Williams and Hill. As the business grew, they started to look for a piece of land that they could use for a yard, not only to accommodate their growing fleet of trucks and equipment, but also to stockpile some materials. Their search led them to a 37-1/2-acre parcel located on Waterbury Road just south of Thomaston, Conn., and conveniently located just off the exit for Route 8, a major thoroughfare through the area. As utility contractors, Williams and Hill were aware that contractors in their line of work, as well as paving contractors and demolition contractors, had a common problem — no conveniently located disposal or recycling site for asphalt, concrete or soil waste for either disposal or recycling. The nearest construction material recycling facility for their area was located either in Danbury, Conn., or New Haven, Conn., about a one-hour trip in each direction. After a considerable amount of effort and back and forth with the town board, the pair managed to get their new property permitted as a recycling facility accepting clean concrete, asphalt millings and clean fill. “Once we had the permits in place it really just took getting the word out, mostly by word of mouth, to the area contractors and it was not long at all before we had a steady stream of trucks bringing us concrete, dirt and asphalt, and usually leaving with a load of mixed processed material that they could use on their construction projects,” Williams said. Once the operation was up and running smoothly, an expansion of their existing operation was brought to the table. Williams’s good friend, see M.J.W. page 62

A rubber-tired loader feeds the hopper atop the Bagela recycler.

Megan Hill and Josh Williams, owners of M.J.W. Services. Throughout the day, truckloads of clean asphalt millings, concrete and soil are delivered to the M.J.W. Services recycling facility.


Page 60 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

ROCK SOLID SERVICEžWE CRUSH YOUR ROCKS

140 Nutmeg Road South South Windsor, CT 06074 51 Veterans Drive Loudon, NH 03307 LARGEST DEALER IN NEW ENGLAND

THE MOST MATERIAL HANDLING MACHINES IN NEW ENGLAND SCREENING CRUSHING CONES IMPACTORS CONVEYORS TROMMELS WASHING RECYCLING

SCREENING

I M PAC T O R S

TROMMELS

USED AND NEW MACHINERY RENTALS AND FINANCING AVAILABLE

CONVEYORS

CRUSHING

1-800-53 CRUSH

Over 100 Machines in Stock

CALL TODAY! 1-800-53-CRUSH

W W W. P O W E R S C R E E N - N E . C O M Family Owned and

Operated for over 20 years

Call for Parts Today

ROCK SOLID SERVICEžWE CRUSH YOUR ROCKS


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 61

CB

Con-Agg A Division of Cleveland Brothers

www.cbconagg.com

2009 State Rd • Camp Hill, PA 888-725-4903 • 717-561-3339 Ō Łŀł Ť Ę

11 Progress Dr ĽļĻĿ ěĘ Ę ļłľĹ Ę

ĽĽĺ ļĺľ Ę

弾

Ę

ļĺĹľ Ļĺł Ę

ĺĿŁ Ę Ļłľľ Ę

ľĽ Ō ĺŁĹ İ ľı ĺľĹĹ Ŀ Ę Ę Ť Ę ľļĹĹ ļĹł Wilkes-Barre Twp. Blvd Ę ĝ Ę Ę ĽľĿľ Ę

www.foleyinc.com Łľľ ĿľĹ Ļłŀľ Piscataway, NJ Ę Ę ŀļĻĝŁŁľĝľľľľ ĿĹłĝľĿĺĝĹļĹŁ ĻĺľĝĿļłĝĽļĹĹ ľĺĹĻ ŀĻĹ Ę Bear, DE ĿĺĹĝĻĿĺĝĽŁŁŀ ļĹĻĝļĻŁĝĽĺļĺ

www.hopenn.com ĺĻĻ Ŀłł ŀŁļ Poughkeepsie, NY Bronx, NY Bloomingburg, NY ŀĺŁĝŁĿļĝļŁĹĹ ŁĽľĝŀļļĝĿĽĹĹ ŁĽľĝĽľĻĝĺĻĹĹ ĿĿĹ ĻĻľ Ę Ę ĿļĺĝŀľŁĝŀľĹĹ ŁĿĹĝĿĿĿĝŁĽĹĺ In CT • Scott Gilligan, 860-461-6534 In NY • Kevin Kretschmer, 646-315-2284

MILTON CAT www.miltoncat.com 100 Quarry Dr ĻĘ Ę Ę ľĹŁĝĿļĽĝļĽĹĹ ŁĹĻĝĽļĽĝĽĻĻŁ ŁĽ 30 Industrial Dr Ę Ę łŀŁĝĻŀĿĝĻĽĹĹ ĿĹļĝĿĿľĝĽľĹĹ ĺĽ ŀł Wareham Ind. Park Brewer, ME Ę ĻĹŀĝłŁłĝ壳ŠľĹŁĝĻłĺĝĺĻĹĹ ĺĿ Ļ徣 Ť Ę ŶĺĹ ĻĹŀĝŁŁļĝłľŁĿ Ę

ĽĹĺĝłĽĿĝĿļľĹ

ĽĿĺĹ Batavia, NY ľŁľĝŁĺľĝĿĻĹĹ 55 Industrial Park Dr Binghamton, NY ĿĹŀĝŀŀĻĝĿľĹĹ ľĹĹ Ę ľĺŁĝŁŀŀĝŁĹĹĹ ĻłĽ Ę ļĺľĝĽŀĿĝłłŁĺ

A solution for every production challenge Metso Outotec has delivered dependable solutions for demanding aggregate applications the past 150 years, including crushers, screens, feeders, trackmounted and wheelmounted units, stationary plants and ě Ť ŏĘ ĺłŁĿĘ still in everyday use. Backed by OEM spare and wear parts, maintenance and repairs, Ę personally. Learn more at mogroup.com today.

www.whitneyandson.com 95 Kelley Ave • Fitchburg, MA 01420 800-245-5472 • 978-343-6353 info@whitneyandson.com

mogroup.com


Page 62 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Bagela Helps Firm Expand Its Recycling Operation

Oversized blocks of asphalt must be reduced before being fed to the Bagela recyclers.

Once the Bagela is loaded with millings, it starts producing hot mix asphalt. M.J.W. from page 59

Chris Spinella of Bagela USA/Pavement Recyclers, suggested Williams and Hill expand their recycling operation into an additional direction. Spinella was familiar with an asphalt recycling machine manufactured by Bagela that could turn the asphalt millings that were essentially being ground up and reused as fill into a far more profitable product by reheating and recycling this waste product into a usable asphalt hot mix. Utility companies and some other categories of contractors are forced to cut open sections of asphalt year-round, and a part of their contract specifies that upon completion of the work, the asphalt has to be replaced, which becomes particularly challenging in the winter when asphalt plants are closed. The only solution available to contractors facing this dilemma has been the use of cold patch, an expensive, yet temporary asphalt patching product that can be used in cold weather. As soon as the asphalt plants are open, however, cold patch has to be torn up and replaced with hot mix asphalt. Bagela’s BA10000 asphalt recycler can accept asphalt millings and waste products, heat them, break them down and turn them into a quality hot asphalt at a consistent rate of 8-10 tons per hour during the winter season when hot asphalt is not available anywhere else, according to the manufacturer. Spinella believed Williams and Hill were in the ideal see M.J.W. page 76

Asphalt millings that have been properly reduced to be fed to the Bagela for asphalt production.

High-quality finished asphalt product.


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 63

W.I. Clark Company www.wiclark.com 17 Eagle Road Danbury, CT 06810 203-775-1203 • 866-675-2120 80 Pratt Road Plainfield, CT 06374 860-546-4808 30 Barnes Industrial Park Road Wallingford, CT 06492 203-265-6781

Company Wrench www.companywrench.com 2636 S Black Horse Pike Williamstown, NJ 08094 855-562-3526 • 856-404-9618

Highway Equipment Company www.highway-equipment.com

mhl 375 F -SERIES

STRONG. RELIABLE. E EFFICIENT.

4690 Route 219 DuBois, PA 15801 814-371-3600 • 877-888-4326 5846 West Road McKean, PA 16426 814-476-7755 • 866-476-7755 22035 Perry Highway Zelienople, PA 16063 724-452-7800 • 800-222-8798

Discover Morre Fuchs World- Class Material Handlers

C.N. Wood Co., Inc. www.cn-wood.com 200 Merrimac Street Woburn, MA 01801 781-935-1919 140 Wales Ave. Avon, MA 02322 508-584-8484 102 State Road Whately, MA 01093 413-665-7009 60 Shun Pike Johnston, RI 02919 401-942-9191 25a Bernhard Road New Haven, CT 06513 203-848-6735 84B Warren Ave Westbrook, ME 04092 207-854-0615

All Island Equipment www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631-643-2605

© 2019 Terex Corporation. Fuchs is a trademark owned by Terex Corporation or its subsidiaries.


Page 64 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Sandvik Mobile Crushing, Screening Celebrates MyFleet 1,000th Unit Milestone

HAND-FED EQUIPMENT/ SKID STEER ATTACHMENT DEALERS (Brush Chippers, Stump Grinders)

Stephenson Equipment, Inc. www.stephensonequipment.com Butler, PA 724-865-9221 Ebensburg, PA 814-886-5191 Harrisburg, PA (HQ) 800-325-6455 Wilkes-Barre, PA 866-667-6756

Robert H. Finke & Sons, Inc. www.finkeequipment.com 1569 US Route 9W Selkirk, NY 12158 518-767-9331

Marty Waldorf (L), sales representative, and Dan Soley, executive VP sales and marketing, at Miller-Bradford & Risberg Inc.

Purpose designed to help customers get the very best out of their investment, Sandvik Mobile Crushing and Screening is now offering its premium data subscription on new equipment and retrofit packages complimentary for seven years. This marks the celebration of the 1,000th mobile unit to leave the factory with My Fleet connected. Digitalization has never been more important than it is in today’s climate and it has positively changed the way of working for many people over recent months. Sandvik Mobile crushing and screening have invested heavily into its online distributor portal and My Fleet telematics systems over the past two years. Every new machine within the Qand U-440i range of mobile crushers and screens is equipped with a My Fleet telematics device and fully connected the moment it leaves the factory. “It’s an exciting time to hit this major milestone of 1,000 units now connected to My Fleet,” said Jesper Persson, vice president life cycle services. “We are proud of the progress we have made in digitalization and automation, and how the technology supports our customers. This investment will enable them to learn more about their operation and how best to improve it by tracking their fleet and the health of it. Alerts and notifications will proactively help to resolve issues before they become critical, while also enabling remote support wherever possible, saving on time, cost and thereby generating the desired uptime in a sustainable way.” U.S. Distributor Miller-Bradford Take Delivery The unit delivered is a Sandvik QI442 impact crusher and the customer to take ownership in February is the U.S. Distributor in Wisconsin, Miller-Bradford & Risberg Inc. Dan Soley, executive VP sales and marketing said, “We are delighted to hear the news that our QI442 is the 1,000th unit. My Fleet is a really beneficial tool as it gives great

insight into machine utilization and location. The ability to offer remote support means we don’t always need to visit the customer to assist them in their operations.” Customers will be able to benefit from enhanced levels of technical support. Whether through Sandvik, or from trained distributor network, technical support specialists will be able to view the same operational data and view notifications of any alerts or machine faults via the system, and thereby be able to offer remote support without necessarily needing to be on site. This immediate assistance increases uptime, while at the same time providing a safer working operation as the operator doesn’t need to physically climb on the machine, as well as supporting the drive to a more sustainable business, according to Sandvik. Customer benefits include: • Remote access to your fleet 24/7 via a mobile device or PC • Optimize performance through monitoring of operational data • Maximize uptime through planned service and preventative maintenance • Quick and efficient support through remote visibility of machine • Safe and sustainable operation with reduced need to dispatch an engineer to site • Peace of mind through enhanced security with geofencing All Sandvik machines that are already fitted with My Fleet and working out in the field will automatically be granted the extended seven-year data subscription. This includes customers who have purchased the My Fleet retrofit kit. The retrofit kit can be fitted to all Sandvik 1 Series models onwards. For more information, visit www.rocktechnology. sandvik. 

of Saratoga

Bobcat of Saratoga www.bobcatofsaratoga.com 1279 Route 9 Gansevoort, NY 12831 518-798-9283

Westchester Tractor, Inc. Westchester Tractor, Inc. www.wtractor.com

60 International Blvd Brewster, NY 10509 845-278-7766

EMPLOYEEE-OWNED EMPLOYEE-OWNED


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 65

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

LARGE EQUIPMENT DEALER THE BEAST 2460XP Trrack Horizontal Grinder

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Leslie Equipment Company www.lec1.com

MODEL BTC-300 M BT B Trrack Carri rie ier

6248 Webster Rd. Cowen, WV 26206 304-226-3299 Fax: 304-226-3067 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818

Norton, WV 304-636-6421 Ashland, KY 606-327-1709 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255

Fairmont, WV 304-534-5454

M MODEL 3590XL W Whole Trree Chipper pp

Stephenson Equipment, Inc. www.stephensonequipment.com Butler, PA 724-865-9221 Ebensburg, PA 814-886-5191

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

Harrisburg, PA (HQ) 800-325-6455 Philadelphia, PA 800-220-4033 Wilkes-Barre, PA 866-667-6756

Quality Fleet Service, Inc. 677500 Millbrook Rd. • Remus, MI M 49340 • 1-800-952-0178 FIN FIND ND US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

www.qualityfleetservice.com

MODEL SG-75 Trrack kS Stump pG Grinder i d

548 New Ludlow Road South Hadley, MA 01075 413-213-0632


Page 66 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

10 Attachments Ad Closing Date Publishing Date

ISSUE

14

Wheel Loaders Ad Closing Date Publishing Date

ISSUE

16 18

July 22, 2021 August 4, 2021

Utility Equipment Ad Closing Date Publishing Date

ISSUE

June 24, 2021 July 7, 2021

Backhoes Ad Closing Date Publishing Date

ISSUE

April 29, 2021 May 12, 2021

August 19, 2021 September 1, 2021

20 Off-Road Trucks Ad Closing Date Publishing Date

September 16, 2021 September 29, 2021


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 67

Mark Keenan 336-858-0186

North Carolina a • South Carolina Virginia • West Virginia

Special Inventory Sale

1-800-797-7276 • www.POWERSCREENMIDATL.com • Kernersville, N.C. • Leland N.C.

NEW, UNUSED, CEDARAPIDS PORTABLE PLANTS CRJ3750

BOTH UNUSED!

Including Run on Jacks, Extended Conveyor, Hydraulic Fold down Electrical Panel, Hydraulic legs under feeder/Hopper assembly

MUST SELL!!!

CRC380XHLS

Including Run on Jacks

HEAVILY DISCOUNTED CALL FOR BEST PRICE READY TO SHIP!

Call Mark Keenan 336-858-0186


Page 68 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Now Your Kleemann Dealer for Eastern New York State!

1569 US Route 9W •  Selkirk, NY 12158 (518) 767-9331

www.finkeequipment.com

EVOLUTION OF INNOVATION Innovative details, safety of the operator, simple handling - with optimal performance values at the same time. This is what KLEEMANN crushing and screening plants represent. The technical know-how and detailed knowledge of the technology is transferred directly to production when working together as a team.

Dediicated team. D t Deedicateed equip pment. With the entire Wirtgen Group and expeert support, youu won’t need annother dealer.

We understan nd your business an nd sense of urgency. Call today! Tom Rizzo, Wirtgen Product Tom oduct Sales Specialist c: 585-3303-2179 o: 585-334-3867 67 e: trizzo@monroetractor or.com E i Equipment, t rental, t l parts p t and d serpment, vice i av available il ble ble parts att 6 locations landtisersvice Ylocations k State SSt – oughout monroetr tNew actor tor to rork Equipment, rental, availableNew at 6York ionst throughout YYork State .com Equip v throughout lork oocati Yor.com o.com St – monroetractorr.com


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 69

• Dealer and manufacturer working together for your full satisfaction • Customized ordering process ensures cone matches application • Meeting and exceeding your individual production goals • Tailor ailor-made terms, conditions, warranties and service • Decades of application experience to help improve your crushing/screening circuits

• Enhanced countershaft rotationn • Fewer accumulators for less maintenance • Inverted tramp relief cylinders pprotected from dust • Chamber design accepts more feed • One-piece cast main frame witth carbon steel bowl • Inspection ports improve mainttenance • Recondition seating surface 3XX in the field • Replaceable seat liners • In-house automaation program


Page 70 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Outotec Launches CycloneSense Smart Online Monitoring Technology

JESCO Inc. New Jersey & New York 118 St. Nicholas Ave. • South Plainfield, NJ 08070 (908) 753-8080 1790 Route 38 • Lumberton, NJ 08048 (609) 267-2020

The CycloneSense technology allows continuous online measurement of the cyclone’s air core shape, size and location based on process tomography, thus helping to find and maintain the optimal operating point for the hydrocyclone.

1275 Bloomfield Ave. • Fairfield, NJ 07004 (973) 227-2221 • (800) 321-8080 497 Fishkill Ave. • Beacon, NY 12508 (845) 831-1800 • (800) 724-0725 110 East Jefryn Blvd. • Deer Park, NY 11729 (844) 482-0910 www.jesco.us

Operating conditions in the hydrocyclone process have a direct impact on plant availability and on grinding and flotation circuit efficiency. To help ensure continuously optimal hydrocyclone operation, Metso Outotec is introducing CycloneSense, a smart measurement system that provides direct, continuous and reliable online monitoring of the hydrocyclone air core. “In order to optimize the process, hydrocyclones should be run so that the fraction of water returned to grinding is the smallest amount possible. In order to do that, you need to know when you are approaching the limit of your hydrocyclone’s coarse discharge rate to avoid going too far and ending up with problems, such as roping,” said Kari Heiskanen, a well-known expert in the field and the author of the book Particle Classification. “CycloneSense allows you to see what is happening inside the hydrocyclone and helps to push the limits of the process.” The CycloneSense technology

allows users to visualize the performance inside the cyclone. It allows continuous online measurement of the cyclone’s air core shape, size and location based on process tomography, thus helping to find and maintain the optimal operating point for the hydrocyclone. In addition, the measurement system helps to detect and prevent potential problem situations, such as roping, where the slurry is not properly separated and instead some of the larger particles are sent to the overflow and directly to the next stage of processing. Combining CycloneSense with the Metso Outotec PSI particle size analyzer allows easy optimization of the cyclone cluster and grinding circuit. Metso Outotec’s ACT Cyclone Control and Grinding Optimization is designed to take full advantage of the measurement data and to provide significant and continuous benefits to customers, according to the manufacturer. The CycloneSense measurement system is available for new Metso

MONROE TRACTOR Outotec hydrocyclones and any existing hydrocyclone installations. As an optional service, Metso Outotec also provides Life Cycle Services with remote monitoring. Key Benefits of CycloneSense • Continuous, direct and reliable online measurement of hydrocyclone air core shape, size and location • Helps to prevent problem situations in hydrocyclones, such as roping, and increases uptime and production • Enables automated hydrocyclone control and performance optimization of the system • Provides valuable additional information for grinding optimization • Simple to install, operate and maintain with no moving parts CycloneSense monitoring technology is part of Metso Outotec’s Planet Positive offering. For more information, visit mogroup.com. 

New York 1001 Lehigh Station Road • Henrietta, NY 14467 (585) 334-3867 • (866) 683-5338 5035 Genesee Street • Buffalo, NY 14225 (716) 681-7100 • (800) 834-9606 7300 Eastman Road • N. Syracuse, NY 13212 (315) 452-0000 • (800) 287-5286 8194 State Route 415 • Campbell, NY 14821 (607) 739-8741 • (800) 866-8912 6 Equipment Drive • Bingamton, NY 13904 (607) 754-6570 • (866) 321-4277 www.monroetractor.com

NORTRAX 98 Sheep Davis Road • Pembroke, NH 03275 (603) 225-2769 300 Clinton Street • Springfield, VT 05156 (802) 885-6840 www.nortrax.com

ROBERT H. FINKE AND SONS Western VT & Upstate NY 1569 US Route 9W Selkirk, NY 12158 (518) 767-9331 www.finkeequipment.com


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 71

A WIRTGEN GROUP COMPANY

T WO O POWERFUL PR RODUCTS. ONE GREAT RESULT. KLEEMANN CRUSHING AND SCREENING G PL ANTS

PERFORMANCE AND EFFICIENCY Y.. KLEEMANN crushing and screening plants can be optimally combined to create a quality end-produc t. An extensive selec tion of mobile jaw, impac t and cone crushers and screening plants, available as scalping and classif ying screens, open up the most diverse applications. With KLEEMANN plants, you’ll achieve the best results – in natural stone, recycling and mining. www.wirtgen e -group.com

WIRTGEN AMERIC A , INC . · 6030 Dana Way · Antioch, TN 37013 · Tel: (615) 501- 0600 · Fax: (615) 501- 0691

CENTRAL EQUIPMENT COMPANY Maine 45 Dempsey Graves Stillwater, ME 04489 (888) 927-8762 (207) 827-6193 www.centralequipmentco.com

ELLIOTT & FRANTZ, INC.

W. I. CLARK COMPANY

SCHMIDT EQUIPMENT INC.

DE, MD, VA & Southeast PA 450 East Church Road King of Prussia, PA 19406 (800) 220-3025 (610) 279-5200 www.elliottfrantz.com

Connecticut 30 Barnes Industrial Park Road S. Wallingford, CT 06492 (866) 675-2120 (203) 265-6781 www.wiclark.com

New England 80 Southbridge Road Rt. 20 North Oxford, MA 01537 (508) 987-8786 www.schmidtequipment.com


Page 72 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Continuing Education is FREE!!

PURP POSE-BUIILT

FROM THE T GROUND D UP

Adjoining the 100,000 sq. ft. US headquarters just outside Charlotte, North Carolina, is the home of the SENNEBOGEN Training Center. Here, service tech hnicians, parts personnel and machine operatorss receive expert hands-on and classroom training absolutely free.

The two service level courses are designed to build on each other. Ou ur trainers p provide instruction on proper mainten nance procedures and system troubleshooting. The operator familiarization course was created d to help operators maximize the machine’s cap pabilities using best practices GPS FƌDJFODZ BOE E TBGFUZ 5IF QBSUT USBJOJOH course teaches parts counter teams how to better understand d the parts manuals for their SENNEBOGEN matterial handlers. According to SEN NNEBOGEN, there is no fee for course atten ndance or course material GPS 4&//&#0(&/ / EFBMFST TUBƋ BOE UIFJS customers. “Our objective is to create North America’s best-trrained service network and provide our custom mers with increased machine availability”, said Constantino C Lannes, President of SENNEBOGEN LLLC.

Available T Trainin ng Courses • Serrvic vice Level 1 • Serrvic vice Level 2

See how SENNEBOGEN can purpose-build the right machine m for you

• Parts Training • Operator Familiarization

www.sennebogen s sennebogen -na com | +1-7044-347-4910 -na.c

ANDERSON EQUIPMENT CO.

TYLER EQUIPMENT CORP.

Pleasant Valley, WV 304-366-3075

Manchester, NH 603-627-7696

Henrietta, NY 585-334-6770

Watertown, NY 315-788-5512

Gorham, ME 207-591-5482

South Charleston, WV 304-756-2800

East Montpelier, VT 802-223-9689

Syracuse, NY 315-463-8673

Endicott, NY 607-748-3400

Bangor, ME 207-942-0177

Lancaster, NH 603-788-5591

Tonawanda, NY 717-877-1992

Latham, NY 518-785-4500

Allegany, NY 716-372-8822

www.andersonequip.com

East Longmeadow, MA 413-525-6351 Berlin, CT 860-356-0840

www.tylerequipment.com


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 73

2020 MCCLOSKEY 512R-T: Hours:274, Horsepower:74 hp, Serial Number:91173, CAT 3.4L Engine. Hydraulic Tipping Grid Over Hopper>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2019 MCCLOSKEY ST80: Hours: 267, Serial Number:90372, Self contained unit with hydraulic fold, raise/lower, and landing legs, and air brakes. Powered by a Kubota Tier 4 Diesel Engine>>>>>>>>>Call

2020 MCCLOSKEY 621REG: Hours:27, Horsepower:175 hp, Serial Number:91419, Fifth wheel kingpin connection with hydraulic landing gear. CAT Tier 4F C4.4 175HP . Hydraulic tipping grid over hopper includes spill plate >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY C3: Hours:211, Horsepower:510 hp, Serial Number:91189, Brand new METSO designed cone, 300 HP Class. Volvo D13 Medium Cone Liner currently installed. Currently available >>>>>>>>>>>Call

2019 MCCLOSKEY J40: Hours:894, Serial Number:89603, NPowered by a CAT 4.4. Hydraulic V-Belt driven jaws allow rotation forward and reverse >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY R155: Hours:15, Horsepower:130 hp, Serial Number:91421, Long hopper feeder.. Remote stop/start feeder. CAT Tier 4F 130HP>>>>>>>>>>>>>>>Call

2020 MCCLOSKEY S190 3D: Hours:17, Horsepower:130 hp, Serial Number:91405, Tracked Triple Deck Heavy Duty Screener. CAT Tier 4F Engine. 15ft Feeding Hopper. Chevron Belt on Main Conveyor. Remote Machine Shut Off. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2004 FINTEC 1107: Hours:5,887, Serial Number:004 1107 072, BRAND NEW DEUTZ ENGINE JUST INSTALLED WITH 0 HOURS. The crusher comes with spare jaw dies AND other VALUABLE misc parts. THIS MACHINE SHOULD BE READY TO GO TO WORK >>>>>>>>>>>$149,500

2021 MCCLOSKEY J50V2 with Pre-Screen: Brand New. Just Arrived. Serial Number: 91696, Volve D11 Tier 4F 360HP Engine>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

2018 MCCLOSKEY 516RE: Hours: 1,700, Remote radial fines conveyor and tailings conveyor. 5’ diameter 16’ long drum >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>$175,000

2018 MCCLOSKEY C44: Hours:909, Serial Number:89103, Metal detector on feeder, twin oil coolers, wired/wireless track remote. Powered by a Tier 4 Volvo D13 Engine. Ready to Run >>>>>>$579,500

2018 MCCLOSKEY J45: Hours:2,465, Serial Number:88782, Heavy Duty Jaw Crusher, 45” x 27” jaw, Volvo D11 Diesel Engine. Hydraulic V-Belt driven jaws allow rotation forward and reverse. Rental Return >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>$419,500

MCCLOSKEY J50V2: Hours:2,813, Serial Number:89268, 2019 MCCLOSKEY R105: Hours:263, Serial Returned from an extended rental period. Powered Number:89823, Screen >>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call by a CAT 9.3 Diesel. Hydraulic V-Belt drive jaw allows jaw to move forward and reverse >>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>$495,850

2021 MCCLOSKEY ST100T-LA TRACKED STACKER: Serial Number: 91551 Cat 3.4B T4F 74HP. Hopper Wear Plate, Impact Idlers Under Hopper, Upgraded Belt Cleaner/Scraper, Radial Lift Axlw with Wireless Remote >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>Call

MCCLOSKEY C50: Hours: 6544, Crushing Hours: 4134, Telsmith 25x50 jaw box, Just gone through - Ready to Run! >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>$249,500

NEW ENGLAND’S EXCLUSIVE MCCLOSKY DEALER!!!


Page 74 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Get the big picture Whether you are looking for portable track-mounted jaw crusherrs, s, cone crush hers or screenerrs, s, Whitney & Son in partnership with Metso Outotec has the products and experience you o are looking for. Since ĺłĿĽĘ Ō Ť ě Aggregate producers call Whitney & Son for products like the Metso Lokotrack® LT1 LT106™ jaw crusher and LT200HP™ cone crusher. The only track-mounted crusher on the market that is road legal. LT2 Contact Whitney & Son for the Me etso Outotec solution that is right for you, or learn more at metso.com/ /aggr aggregates.

mogroup.com

955 Kelley A 9 Avvenue Fitchburg, MA 04120 800--2245-547 47722 info@whitneyandsson.com

Whitney & Son is a Metso Outotec distributor serving all of New England. Lok o otrack® is a registered trade emark of Metso Outotec Corrporation.


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 75

FAE PT LINE: GET USED TO BEST IN CLASS

fae-group.com

(770) 407-2014 - info@faeusa.com

EVO O 10421 Guilford Road Jessup, MD 20794 301/725-7394 Fax: 301/725-7361

38420 Sussex Highway Delmar, DE 19940 302/846-3033 Fax: 302/846-0763

12051 Tac Court Manassas, VA 20109 703/257-2381 Fax: 703/257-2383

450 E. Church Road King of Prussia, PA 19406 610/279-5200 Fax: 610/279-6366

ELLIOTT & FRANTZ, INC. WWW.ELLIOTTFRANTZ.COM


Page 76 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

M.J.W. Services Finds Solution to ‘Common Problem’

THE GEAR G TO CLEAR

M.J.W. from page 62

MANY MODE ELS, ENDLESS APPLICATIONS ATIONS High volume land cle earing operations know that when it co omes to creating the highest volume products p at th lowest the l t costt per tto on, P Peterson t horizontal grinders and chippers off ffer er bett better fracturing g, more accurate product sizing, and more m throughput than any machine on n the market.

Since 1981, Peterson’s P attention to detail and drive to build the highest quality, y, highest highe est vvolume producing machines hi maake k a Peterson P t a sure investment. Want to t see what w a Peterson can do?

Give us a call at 800.269.6520 8 or visit us at ww ww.petersoncorp.com

New England & New York www.barryequipmennt.com

Blower Trucks

•

Pennsylvania New England && West Virginia New York www.clevelandbrothers.co www.barryequipmen nt.comom

Chippers

•

Groff Tractor Pennsylvania New Virginia Jersey & West www.grofffftr tractor.comom www.clevelandbrothers.co

G Grinders

•

Screens Screens

Maryland, Delaware, NE Virginia, West Virginia www.albancat.com

•

Stacking tacking tack ki Conveyors C

situation to expand their recycling operation into recycling this hot mix asphalt for local contractors and that it would be a profitable venture for them. The raw materials were readily available to them and the hot mix that they would recycle would actually cost less than the cold patch alternative, which can cost up to $165 per ton, that contractors were forced to use. Another advantage to using hot mix versus cold patch is that the hot mix is significantly easier to work with than the cold patch. A material heated to 300 F to 330 F degrees is much more pliable than trying to lay cold patch, which is, at times, difficult to mold into place. Once Williams and Hill decided to move ahead with the project, they needed to research the best equipment to meet their recycling needs. They determined Bagela was well suited for the type of volume that they wanted to generate, as it uses indirect flame and convection heat as its heat source, which allows for large volume, consistent yields. Their plans included recycling asphalt during the cold season, after hours and weekends in as large a volume as possible. Knowing that the demand would be quite high, the decision was made to utilize two units, each capable of producing 10 tons per hour. With the help of Greg Harla, a specialist with Bagela who has overseen the installation of more than 100 of these types of operations, concrete blocks were used to create an elevated platform for two Bagela BA10000 recyclers that would be fed asphalt millings via a rubber-tired loader with the resulting hot mix asphalt dropping to a discharge pit below, where it can then be loaded to the customer’s trucks for transportation. The operation went online in January 2021 and has been an immediate success. Word spread very quickly of the asphalt availability and demand has been growing steadily. According to Williams and Hill, the Bagela recyclers have operated flawlessly and have met all of their anticipated production levels. “Greg Harla and the rest of the people at Bagela are absolutely experts in their field and have made this project run seamlessly from start to finish. Our customers have been very happy with the quality of the product that’s been produced. Even when extremely cold weather [below zero] has set in the quality of the product being recycled by the Bagela is extremely good,” they said.  CEG


Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • April 28, 2021 • Page 77

CRUSHING

MA ATERIAL TERIAL HANDLING

SCREENING G

TRACKS

ZZZ KRႇPDQHTXLS FRP

WASHING W ASHING & CLASSIFYING

ZZZ WUDFH\URDG FRP

ZZZ PXUU\VYLOOHPDFKLQHU\ FRP

ZZZ WKRPSVRQUROHF FRP

The complete source for equipment in the aggregate, construction and recycling industries. dustries. Offering industry-leading brands such as the Pioneer Jaw Crusher, Kodiak® Plus Cone Crusher, Su uperStacker® ® ® ® Extendable Stacker, ProSizer Mobile Screening e Plant, Combo Screen, Vari-Vibe a High-Frequenc cy Screen, Duo-Vibe® High-Frequency Screen, Series 9000 equipment, Fast Trax, r Global Trrack and FastPack. k.

www.kpijci.com


Page 78 • April 28, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide


SECTION

Attachment & Parts Pages 79-86

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Road Widener Brings Heightened Safety to Road Crews Road Widener LLC., a manufacturer of road construction equipment, offers an offset vibratory roller attachment. The attachment’s offset design allows the host machine to drive safely on flat ground while compacting sloping shoulders, ditches and other hard-to-reach areas alongside the road, a task that has traditionally put road crews in danger of rollover accidents, increased workers’ comp costs and led to poor safety ratings, according to the manufacturer. The offset vibratory roller attaches to most loaders, graders, compact track loaders and skid steers, operating off the host machine’s engine and hydraulics. Utilizing the host machine for power reduces maintenance by 90 percent over self-propelled rollers while also offering the versatility of three interchangeable drums sizes and up to 30-degree pivot angles. “Having spent years working for a paving contractor, I witnessed firsthand the daily struggles of sacrificing safety to compact on a slope,” said Lynn Marsh, Road Widener LLC president. “The risk of tipping The offset vibratory roller attachment decreases maintenance by is high, but there were few options 90 percent while increasing road crew safety with its offset operation. to address the challenge. The offset vibratory roller offers a viable alterThe offset vibratory roller can be attached native, allowing contractors to quickly and 4-ft.-wide drum. The drums can pivot up to efficiently get the job done without risking 30 degrees, reach up to 30 in. below the to any host loader, skid steer, compact track mounting point, and are interchangeable. loader or road grader by inserting the host an accident. It’s a game changer.” The offset vibratory roller compacts a This allows road crews to take on jobs of machine’s lift arm pads into the offset vibravariety of materials including stone, asphalt, varying sizes and aggregates by purchasing tory roller’s universal mounting pad. An gravel and topsoil. Once attached to a host additional drums instead of investing in mul- adapter plate also is available for host machine’s lift arm, the offset vibratory roller tiple self-propelled machines with engines machines like compact backhoes and telebecomes operable by easily connecting to that can fail. Additionally, the vibratory fea- scopic loaders that may not be readily setup the host machine’s hydraulics and pairing ture operates between 2,500 to 3,500 vibra- to accept standard attachments. The offset vibratory roller is compatible with standard the remote control. From there, all aspects of tions per minute for optimal compaction. Using the offset vibratory roller over self- and high flow hydraulics. the attachment, including height, angle, The offset vibratory roller operates withextension and compaction adjustments, can propelled compaction machines that have a be operated by a single crewmember via the greater risk of tipping helps to reduce work- out an engine, powertrain, or any associated ers’ comp claims, lower insurance premiums parts of its own, which makes for 90 percent remote control. The offset vibratory roller has a total reach and increase contractors’ safety ratings, less maintenance than self-propelled machines by cutting out traditional engine of 9 ft. and can be purchased with a 2, 3 or according to the manufacturer.

and transmission service, according to the manufacturer. Instead, the offset vibratory roller contains five grease fittings that need to be lubricated every 10 hours, or more often if operating in adverse conditions. Standard hardware and hydraulic checks along with general cleaning also are part of the daily maintenance routine. “We manufactured the offset vibratory roller to fit onto the equipment contractors already have and are familiar with,” said Marsh. “The design allows for simplified maintenance, easy transport and offers an unmatched ROI.” For more information, call 844/494-3363 or visit www.roadwidenerllc.com. 


Page 80 • April 28, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

FIXED MOUNT MG SUPERGRIP GRAPPLES For use with XR Rotators and Tiltrotator applications. – 6 to 25 tonne Excavators

HULTDINS.COM | 519-754-0044


Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • April 28, 2021 • Page 81

www.eaglepowerandequipment.com 953 Bethlehem Pike Montgomeryville, PA 18936 215/699-5871 2211 N. Dupont Highway New Castle, DE 19720 302/652-3028 1416 Phoenixville Pike Suite 200 West Chester, PA 19380 610/458-7054

Maximize your ROI www.contractorssales.com 121 Karner Road Albany, NY 12212-2010 518/456-1445 1283 Dolsontown Road Middletown, NY 10940 845/956-0222

To get your best possible return on investment, highest productivity and longest equipment life, it’s important to use the right carrier with the right tool. www.highway-equipment.com 22035 Perry Highway Zelienople, PA 16063 724/452-7800 5846 West Road McKean, PA 16426 814/476-7755 4690 Route 219 Dubois, PA 15801 814/371-3600

www.tylerequipment.com 251 Shaker Rd. East Longmeadow, MA 01028 800/292-6351 1980 Berlin Turnpike Berlin, CT 06037 800/352-4473

www.traceyroad.com 6803 Manlius Center Road East Syracuse, NY 13057 800/872-2390 1523 Route 11 North Kirkwood, NY 13795 800/370-9488 19598 Cady Road Exit 44-Watertown Center off Adams Center, NY 13606 888/335-0200 9598 River Road Marcy, NY 13403 800/872-2390

Before you buy or rent, rely on people you can trust. Allied Construction Products, with 78 years of experience, can guide you to the right hydraulic breakers – including our new Excellence and Performance Series models – and the right Ho-Pac® and Skid-Pac® compactor drivers. Because nobody delivers the right power, or the right features, like Allied.

Scott Scholz

Jeff Sharp

Rich Steinbrenner

ALLIEDCP.COM | 800-321-1046

THERE’s NO SUBSTITUTE FOR EXPERIENCE


Page 82 • April 28, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

For more safety tips visit SmokeyBear.com

LaBounty Launches Expanded Line of MHP Mobile Hydraulic Pulverizers Stanley Infrastructure, a partner for industrial tools and attachments, announced that LaBounty launched an allnew line of MHP mobile hydraulic pulverizers. This update to LaBounty’s suite of demolition solutions offers peak efficiency for secondary demolition and concrete recycling applications, according to the manufacturer. The LaBounty MHP platform offers industry-leading power-to-weight ratio and large jaw capacities. Its new design is optimized to pick-up, crush and separate rebar from concrete faster than before as a result of high-tip forces, increased jaw sizes and fast cycle times. The MHP’s unique shape makes it extremely versatile for use on the ground when separating rebar from concrete in recycling applications. Key features of the new MHP include: • Reverse Cylinder with internal hydraulic lines that protect components from debris • Pass Through Lower Jaw that facilitates rebar separation • Interchangeable Teeth offer lower maintenance • Serrated Blades for efficient rebar cutting • Bucket Style Teeth for sorting of materials “This expanded offering supports our continued mission to provide customers with demolition and recycling solutions for any project, no matter the scale or budget,” said Michael Moriarty, director of marketing at Stanley Infrastructure. “We’re excited to push another new line-up of competitively priced, high production attachments for our demolition customers.” For more information, visit www.stanleyinfrastructure.com.  The LaBounty MHP's new design is optimized to pick-up, crush and separate rebar from concrete faster than before as a result of high-tip forces, increased jaw sizes and fast cycle times.


Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • April 28, 2021 • Page 83


Page 84 • April 28, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engineered eered and y that prov p vides safer afer and feature the Ultralo ok® tooth system easier tooth repla acement. Combined with premium m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

Ultra alok® Tooth o System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades es s™ Cutting Edgess and Accessories essories

ANDERSON EQUIPMENT COMPANY C.N. WOOD CO., INC.

JORDAN EQUIPMENT CO.

200 Merrimac Street Woburn, MA 01801

18 Blackstrap Road Falmouth, ME 04105

1000 Washington Pike Bridgeville, PA 15017

2007 Ruskin Drive Pleasant Valley, WV 26554

912 Albany Shaker Road Latham, NY 12210

18 Gorham Industrial Pkwy Gorham, ME 04038

412/343-2300

302/366-3075

518/785-4500

207/591-5482

7550 Clearfield Curwensville Hwy Clearfield, PA 16830

2140 Military Road Tonawanda, NY 14150

22607 Murrock Circle Watertown, NY 13601

142 Target Industrial Circle Bangor, ME 04401

Whately, MA

814/765-5311

717/877-1992

315/788-5512

207/942-0177

413/665-7009

20561 Paint Blvd. Shippenville, PA 16254

115 Middle Road Henrietta, NY 14467

720 E Franklin Street Endicott, NY 13760

1645 Candia Road Manchester, NH 03109

401/942-9191

814/226-4100

585/334-6770

607/748-3400

603/627-7696

436 Riggs Road Somerset, PA 15501

6317 Thompson Road Syracuse, NY 13206

4176 Route 417 Allegany, NY 14706

151 Packard Road East Montpelier, VT 05651

508/584-8484

315/463-8673

716/372-8822

802/223-9689

www.cn-wood.com

781/935-1919

814/443-2867

207/797-2240 35 Daves Way Hermon, ME 04401

207/848-9036 Johnston, RI Avon, MA

744 Clough Mill Road Pembroke, NH 03275

603/228-3377

www.jordanequipment.com

www.andersonequip.com www.esco.weir

Copyright ©, WEIR and the WEIR Logo are trademarks ks and/or registered trademarks of We eir Engineering Services Ltd.


Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • April 28, 2021 • Page 85

Visit our website for more attachments!

www.nationalattachments.com

We have an Extensive Used Inventory!

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

The XBoom Coupler® is an Exclusive, Patented product. XBoom Coupler® is a Registered Trade Mark and all product name(s), logo(s) and content is Copyright Protected © 2018.


Page 86 • April 28, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

TRACEY ROAD EQUIPMENT COMPANY WRENCH

www.traceyroad.com 6803 Manlius Center Road East Syracuse, NY 13057 315-437-1471 800-872-2390

Albany, NY 518-438-1100 866-740-8853

Queensbury, NY 518-793-9688 833-817-2917

Utica, NY 315-765-8746 800-872-2390

Kirkwood, NY 607-775-5010 800-370-9488

Henrietta, NY 585-334-5120 866-950-6210

Adams Center, NY 315-788-0200 888-335-0200

www.companywrench.com 2636 S Black Horse Pike Williamstown, NJ 08094 856-404-9618 855-562-3526


Trucks & Trailers

SECTION

Pages 87-95

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Creative Design Fuels Bauer Built’s Future Plans Among the top product lines are the SD-36 off-road side-dump trailer and the SMS-32 manure spreader.

By Ruksana Hussain CEG CORRESPONDENT

When Vaughn Bauer began designing and manufacturing folding planters for local agriculture in Paton, Iowa, he was simply improving upon the design and utility of machinery used commonly by farmers in the area. Not only did he create and develop his own unique solutions, but he also helped others with his expertise, as well. Word caught on quickly and he became known for his innovations. What began as Paton Machine and Welding, a machine, weld and paint garage for custom jobs that opened in 1982, is now Bauer Built Manufacturing (BBM), an 80-staff strong operation housed in a 300,000-sq.-ft. large-scale manufacturing facility with services including CNC machining, laser cutting and saw cutting, welding and assembly. The company specializes in designing, manufacturing and assembling construction and agricultural machinery for clients within and outside the

With business ramping up again this year following the slump brought on by the pandemic, Bauer Built Manufacturing is eyeing markets on both coasts and internationally.

United States. The company’s tremendous growth in these 40 years has included an interest from American manufacturing behemoth Deere & Company. In 2002, a team from John Deere came knocking on Bauer’s door, having observed his creativity in action, and leading to Bauer working exclusively with the company on cobranded planters. The Deere Bauer toolbars are said to be the only cobranding John Deere has ever done on equipment in the country. In 2013, Deere & Company acquired part of BBM and in 2015, Bauer was recognized with the Greene County Farm Bureau Distinguished Service to Ag Award for his contributions to the area and the industry. “Our main forte now is we are a big enough shop that we Bauer Built Manufacturing’s can handle large products primary markets are conand projects to do start-tostruction and agriculture. finish manufacturing. Where a lot of places only specialize in welding or machining, we can do everything,” said Design Engineer Garret Johnson, an Iowa State University see BAUER page 88


Page 88 • April 28, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Bauer Built Manufacturing Eyes Expanding Markets The side dump trailer was designed with contractors in mind to meet their needs for various jobs in soft conditions and has seen growing demand through the Midwest.

Cleveland Brothers 4565 William Penn Highway Murrysville, PA 15668 866-551-4602

Milton CAT 100 Quarry Dr Milford, MA 01757 508-634-3400

Erie 3950 Depot Road Erie, PA 16510 814-898-3388

84 Concord St North Reading, MA 01864 978-276-2400 978-276-2410 Parts

Somerset 168 Industrial Park Road Somerset, PA 15501 814-445-7915

14 Kendrick Rd Wareham, MA 02571 508-291-1200

Clearfield 1307 S Second Street Clearfield, PA 16830 814-765-1611 Mansfield 18512 Route 6 Mansfield, PA 16933 570-662-7171 BAUER from page 87

agricultural engineering graduate who has worked at BBM for four years. His work entails creating new products, custom fixtures, designing single parts or creating complex assemblies as needs may arise in-house. “I enjoy working here mostly because of the constant change in workflow. I’ve built and designed so many things in the course of my time here ... A lot of companies will reach out to us because of our short timeframes and what we can do,” he said, which he attributes to “the nature of the facility, the resources we can allocate to a project, and the people we can provide.” Specialty equipment at Bauer includes a Tanaka LMRV TF6000 plate laser, measuring 120 ft. long by 10 ft. wide, and two Mazak 3D FABRI GEAR 300 tube lasers, a niche product that can deal with up to 50-ft. tubes. For high production weldments, Bauer has two robotic welding cells — a Lincoln Electric System 55 and a Wolf Robot (that can hold up to 7,000 lbs.). Two paint booths — a powder gun booth and a liquid gun booth — allow for larger paint components and custom manufacturing. When it comes to custom clients, work begins with creating a 3D model of the product that is shared with manufacturing engineers “on how we want to process it in our facility.” The order is released to the shop where it then gets welded, painted and assembled. BBM’s primary markets are construction and agriculture. Among the top product lines are the SD-36 off-road side-dump trailer and the SMS-32 manure spreader. One is a 40ton off-road side-dump and the other is a 35ton industrial strength manure spreader for custom applicators. The side dump trailer

was designed with contractors in mind to meet their needs for various jobs in soft conditions and has seen growing demand through the Midwest. It moves material faster, offers ease of operation and durability and is priced competitively, according to the manufacturer. Features include hydraulic suspension and capacity, 360-degree rollover hitch with either ag or gooseneck hitch-style option, self-steer rear axle and triple-axle design and tandem option. Recent customers include Fehn Companies in Minnesota, Murphy Excavating in Kentucky and Waringa Farming in Australia. With business ramping up again this year following the slump brought on by the pandemic, BBM is eyeing markets on both coasts and internationally. While the pandemic did affect BBM with production going slow as some of the companies it worked with were affected, there was no direct impact within the company itself. With a spacious manufacturing facility and staff spread out across functions, the offices and factories never closed, and there were no local county-mandated closures. Johnson did share that finding skilled labor is a challenge “as a whole in the manufacturing industry. In an effort to build the future of manufacturing, BBM is engaged with the area community colleges and high school career academies promoting the theory that a skilled trade is more than a job, it is a career without the burden of debt associated with bachelor’s degrees.” Another challenge is being able to compete economically in a niche area of the industry. Despite that, he voiced promise in business picking up again and demand for Bauer’s trailers on the rise.  CEG

Lantz Corners 3105 Route 219 Kane, PA 16735 814-778-5250 Mount Pleasant 309 Foothills Lane Mt. Pleasant, PA 15666 724-696-4080 Turbotville 190 Cleveland Brothers Road Watsontown, PA 17777 570-538-2551 Lancaster 4326 Oregon Pike Ephrata, PA 17522 717-859-4905 State College 2955 Stewart Dr. State College, PA 16801 814-237-8338 Harrisburg 5210 Paxton Street Harrisburg, PA 17111 717-564-0598 Wilkes-Barre 970 Wilkes Barre Twp. Rd. Wilkes-Barre, PA 18702 570-822-8141 Clarksburg 6286 West Veterans Memorial Highway Bridgeport, WV 26330 304-842-2222 Shinnston 5541 Benedum Drive Shinnston, WV 26431 304-592-5855 www.clevelandbrothers.com

4610 E Saile Dr Batavia, NY 14020 585-815-6200 585-815-6250 Parts 500 Commerce Dr Clifton Park, NY 12065 518-877-8000 518-877-6860 Parts 55 Industrial Park Dr Binghamton, NY 13904 607-772-6500 607-251-6550 Parts 294 Ainsley Dr Syracuse, NY 13210 315-476-9981 315-703-7042 Parts 79 Robertson Blvd Brewer, ME 04412 207-989-1890 207-991-3130 Parts 16 Pleasant Hill Rd Scarborough, ME 04074 207-883-9586 207-885-8045 Parts 30 Industrial Dr Londonderry, NH 03053 603-665-4500 603-665-4510 Parts 150 Cat Lane Richmond, VT 05477 802-434-4228 802-434-7810 Parts 2158 Plainfield Pike Cranston, RI 02920 401-946-6350 www.miltoncat.com

Bobcat of North Jersey 201 Maltese Dr. Totowa, NJ 07512 973-774-9500 www.njbobcat.com


Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • April 28, 2021 • Page 89

NO OT ALL T TRAILERS S ARE BU UILT THE E SAME SOM ME ARE STRO ONGER THAN N OTHERS

Our ttrrailers start out tough gh and stay tough so th heyy can safelyy haul yyour equipment q p day after t day, yearr after year. Learn more: towmaster ster.com/more .

Hyd Dump D Drop-De eck

Tilt-Deck

AMER RICA A’S ’S BEST B BUIL LT T TRAILE TRAILERS ERS FOR R PROFESSIONAL HAULER RS

Hyd draulic Tail a

Lowboy

M MORE MODELS • MORE OPTIONS PTIONS • MORE CHOICES

Call 800-462 2-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH

Asphalt Care Equipment Inc. 2765 Galloway Rd. Bensalem, PA 19020 215-639-9800 www.asphaltcare.com

Douglas Equipment & Supply Co. 7100 Kreidler Rd. York, PA 17403 717-428-1517 www.douglasequip.com

Metro Bobcat, Inc. 8250 Beechcraft Ave. Gaithersburg, MD 20879 301-840-9300 33 West Old Liberty Rd. Eldersburg, MD 21784 410-795-1500

FOLEY Inc. 855 Centennial Avenue Piscataway, NJ 08854 732-885-5555

Bobcat of Connecticut, Inc. 54 Alna Lane E. Hartford, CT 06108 860-282-2648

650 S. Egg Harbor Road Hammonton, NJ 08037 609-561-0308

Bobcat of Stratford 821 Woodend Road Stratford, CT 06615 203-380-2300

2975 Galloway Road Bensalem, PA 19020 215-639-4300 5102 Beckmantown Road Whitehall, PA 18052 610-261-4887 720 Pulaski Highway Bear, DE 19701 302-328-4131 www.foleyinc.com

Bobcat of Greater Springfield 181 Wayside Ave. West Springfield, MA 01089 413-746-4647 www.bobcatct.com

Company Wrench 2636 S. Black Horse Pike Williamstown, NJ 08094 856-404-9618 www.companywrench.com

11000 Pulaski Hwy White Marsh, MD 21162 410-483-0600 7002 Marlboro Pike, Forestville, MD 20747 301-568-1104 www.metrobobcat.com

Monroe Tractor & Implement 1001 Lehigh Station Rd Henrietta, NY 14467 585-334-3867 6 Equipment Dr Binghamton, NY 13904 607-754-6570 5035 Genesee St Buffalo, NY 14225 716-681-7100 8194 State Route 415 Campbell, NY 14821 607-739-8741 423 Old Loudon Rd Latham, NY 12110 518-785-8013

Robert H. Finke & Son, Inc. 1569 Route 9W Selkirk, NY 12158 518-767-9331 www.finkeequipment.com

Ditch Witch Mid-States 3660 Interchange Road Columbus, OH 43204 614-443-9751 888-DITCHWITCH 9052 Marshall Road Cranberry Township, PA 16066 724-742-2844 888-DITCHWITCH www.ditchwitchmidstates.com

H.A. DeHart & Son 311 Crown Point Rd. Thorofare, NJ 08086 856-845-2800 www.hadehart.com

7300 Eastman Rd N Syracuse, NY 13212 315-452-0000 www.monroetractor.com A. Montano Company 571 NY 212 Suagerties, NY 12477 845-247-0206 www.amontanoco.com


Page 90 • April 28, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Pittsburgh, PA Lancaster, PA Hubbard, OH Cincinnati, OH

(412) 747-7777 (717) 569-4531 (330) 534-0082 (513) 874-4880

Daily RENTALS & Long-Term LEASING! (412) 747-7777

New & Used Trailer Sales • Rental / Leasing • Financing • Service • Parts

• 140 — 2015 Reitnouer 48'x102" Maxmiser Flatbeds $25,950 (In Stock) MECHANICAL DETACHABLES Unit # 4644

Qty 4 - New Eager Beaver Pavers, 35 GSL-PT Hydraulic Detachable Lowboys, 35-Ton, 24’ Deck, Air Ride.

Unit # 4641

Qty 1 - New 35 GSL-BR, 35-Ton, 24’ Deck, Beaver Tail.

2016 XL Specialized 35-Ton, 29’ in Well. 2012 Trail King 35-Ton, 29’ in Well. (Pictured)

*XL SPECIALIZED MINI-DECKS* Qty 4 – New 53’x102” 40-Ton Minideck, Hydraulic Classic Neck, 33’7” Clear Deck, 12” Loaded Deck Height, Accepts Both Flip Box and Flip Axle, Both Narrow Neck (Pictured) and Full Width Necks Available. ALL Tri-State Locations

FONTAINE DOUBLE DROP EXTENDABLES

Spec’s/ Features: • • • • •

2014 Fontaine LXTN-Extendable 29’-50’ in Well, 2014 Fontaine Flip Axle. Unit #’s 4451 & 4452

Qty 2 – New Fontaine LXT-40, 53’-74’x102”, 34’ Well - Closed, 60’ Well - Open, 40-Ton, Mechanical Detach. (Pictured)

ONLY

9,300lb +/-

s

48’x102” Front Axle Lift Aluminum Wheels LP22.5 Tires Winch Track on Both Sides of the Trailer • +HQGULFNVRQ 7LUH ,QÀ DWLRQ System

Qty 2 – New 53’x102” 25-Ton LOW CAMBER Minidecks, Hydraulic Classic Neck with Full Width Top Deck, 33’7” Clear Deck, 12” Loaded Deck Height, Pony Motor, Accepts Flip Axle.

MATCHED GROUP

Qty 14 - 2018 & 2019 Fontaine 48’x102” Steel Flats, Spring Slider, Winch Track. Unit #’s 4625-4638

Qty 1 – New Fontaine LXTN-40, 50’-71’x102”, 29’ Well - Closed, 50’ Well - Open, 40-Ton, Hydraulic Detach. Qty 1 – New Fontaine 55MXT, 55’-76’x102”, 29’ Well – Closed, 50’ Well - Open, 55-Ton, Hydraulic Detach. Qty 1 – New XL Specialized 45-Ton, Single Drop Stretch, 30” Deck Height, Deck 42’ Closed/65’4” Open.

2018 Fontaine Magnitude 55L Plus, 26’ in the Well, 18” Deck Height. Unit # 4234 2013 Entyre 55-Ton Paver, 24’ in the Well. (Not Pictured) Unit # 4536 2019 Manac Extendable 48’-80’x102”. Unit # 4411

2013 Sunbelt Pole Trailer, 48’/65’x102”, S/R. Unit# 4031

ip s Fl oxe e v B Ha Flip e W s& le Ax

2014 Talbert 51-Ton, 25’ in Well. (Not Pictured)

Unit # 4502

2017 Talbert 55-Ton, 25’6” in Well. (Not Pictured)

Unit # 4609

2012 Trail King 55-Ton, 26’ in Well w/2020 Trail King Flip Axle. (Not Pictured) Unit #’s 4605 & 4606

55-Ton 15” Deck Height Qty 8 – New XL Specialized 55-Ton Hydraulic Detachable Lowboys, 15” Deck Height, 26’ Deck, Rear Lift Axle, Available w/Both Standard and Hydraulic Flip Axles. Red, Black and Galvanized in Stock.

NEW MANAC S-T-R-E-T-C-H FLATBEDS

Qty 6 – New Fontaine Workhorse 55LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Rear Lift Axle, Some w/ Wheel Covers. Qty 1 – New Fontaine Magnitude 55-Ton Drop Side Rail, Rear Lift Axle, o/s Alum Wheels. Qty 1 – New Fontaine Magnitude 60LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Front Ramps, Rear Lift Axle.

Qty 1 – New Fontaine EQI Hydraulic Spreader. Qty 1 – New Fontaine Magnitude 60-Ton Beam Trailer, 28’ Beam, Modular Connection at Rear. Qty 1 – New Fontaine 55-Ton Paver, 24’ Well.

EAGER BEAVER TAGS Qty 6 – New 20XPT, 20-Ton, 21’ Flat Deck, Air Brakes with Spring Ramps (Qty 2 – with Hydraulic Ramps). Qty 1 – New 25XPL, 25-Ton with Hydraulic Ramps.

Qty 7 - 48’-80’x102”, Air Slider & Spring Slider. All with Winch Track and Galvanized Winches.

We Rent & Lease all types of Hydraulic Detachable’s, Drop-decks, Flatbeds, Sliding Axles, Extendable (flatbeds & double drops) Dry Freight Vans and more!


Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • April 28, 2021 • Page 91

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

Chappell Tractor

Stephenson Equipment, Inc.

Tracey Road Equipment

Vermeer All Roads

www.chappelltractor.com

www.stephensonequipment.com

www.traceyroad.com

www.vermeerallroads.com

454 Route 13 South Milford, NH 03055 800-698-2640

Trailer Sales Contact John Connor 302-521-2601

6803 Manlius Center Road East Syracuse, NY 13057 315-437-1471 • 800-872-2390

251 Route 125 Brentwood, NH 03833 800-616-5666

135 Lincoln Avenue Prospect Park, PA 800-220-4033 • 610-534-0700

1523 Route 11 North Kirkwood, NY 13795 607-775-5010 • 800-370-9488

391 Loudon Rd. Concord, NH 03301 800-358-6007

Harrisburg, PA Pittsburgh, PA Butler, PA Ebensburg, PA Wilkes-Barre, PA Albany, NY

300 Middle Road. Henrietta, NY 14467 585-334-5120 • 866-950-6210

19598 Cady Road (Exit 44 - Watertown Center - off I-81) Adams Center, NY 13606 315-788-0200 • 888-335-0200

8830 Corridor Rd. Annapolis Junction, MD 20701 301-498-5200 • 800-492-1274

115 Railroad Ave. Ext. Albany, NY 12205-0306 518-438-1100 • 866-740-8853

Ashland, VA 800-552-2074

9598 River Road Marcy, NY 13403 315-765-8746 • 800-872-2390

Manassas, VA 877-661-6566


Page 92 • April 28, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Isuzu North America, Gatik Form Strategic Collaboration Isuzu North America Corporation and Gatik have agreed to collaborate on a project to develop and evaluate fully autonomous medium-duty trucks. Isuzu is a market leader in low cab forward (LCF) trucks in the U.S. and Canadian markets. Gatik is an industry leader in automating on-road transportation networks for B2B middle-mile logistics. This collaboration is an industry first in the medium-duty category and will accelerate the commercialization of autonomous delivery fleets while contributing to a safer and more sustainable logistics community in the future, according to the companies. The collaboration will integrate Gatik’s autonomous driving technology into several Isuzu medium-duty N-Series trucks to produce SAE Level 4 delivery vehicles with redundant systems. The first vehicles will be deployed this year due to the cooperative efforts of Gatik’s and Isuzu’s engineering teams. “By bringing these two teams together, we can create segment-changing technology while positioning Gatik to safely commercialize autonomous delivery technology at scale,” said Gatik’s CEO and Co-Founder Gautam Narang. “Isuzu N-Series trucks have been best-

Rapidly increasing e-commerce sales and a well-documented driver shortage have caused businesses to struggle to meet the expectations of on-demand goods movement. This effort will combine Gatik’s autonomous driving software and operational expertise with Isuzu’s award-winning truck platform to address these critical industry pain points, ensuring retailers can maintain capacity, lower operating costs and keep delivery times short.

This collaboration is an industry first in the medium-duty category and will accelerate the commercialization of autonomous delivery fleets while contributing to a safer and more sustainable logistics community in the future, according to the companies.

sellers in their class in the combined U.S.Canadian market for 35 consecutive years, making them an ideal fit for our solution. We are excited to combine our industry-leading expertise and bring a long-term, sustainable solution to the supply chain.” “As customer requirements for the medi-

um-duty product evolve at an increasingly rapid pace, having the ability to collaborate with Gatik, an industry leader in autonomous technology is very exciting for our team,” said Takashi Sadaoka, president and CEO of Isuzu North America Corporation.

About Gatik Gatik was founded in 2017 by veterans of the autonomous technology industry and has established offices in Palo Alto and Toronto. The company’s mission is to deliver goods safely and efficiently using autonomous vehicles. With its fleet of light to medium duty trucks, Gatik is leading the way in autonomous middle mile delivery. The company focuses on shorthaul, B2B logistics for Fortune 500 retailers such as Walmart and Loblaw. Gatik enables its customers to optimize their hub-and-spoke supply chain operations, enhance inventory pooling across multiple locations, reduce labor costs and meet an unprecedented demand for contactless delivery. 

Dakota Bodies Touts Design Changes to Gen II Service Body Dakota Bodies announced the release of its new and improved weld together service body. The weld together design of the Gen II Service Body provides a long-term, solid connection between parts to achieve increased structural integrity, according to the manufacturer. The most notable update to this body is the included universal mounting kit designed to fit 2020 and newer Ford, Ram and GM chassis. Other major design updates include: • Compression T-handle door latches • Cast aluminum fenderettes • Silver zinc finish tailgate brackets • Fuel filler cup in streetside fender • Modernized bumper appearance “I think customers will appreciate the modernized design elements, new price point and ease of upfitting with the universal mounting kit,” said CEO Jeff Orthausis. “Times change and it’s important that we adapt and continuously grow our products to fit current and future needs.” The Gen II Service Body is completely customizable to fit each customer’s needs. It is immediately available for quotes. For more information, visit call 886/2270071 or visit www.dakotabodies.com. 

The most notable update to this body is the included universal mounting kit designed to fit 2020 and newer Ford, Ram and GM chassis.


Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • April 28, 2021 • Page 93

Lowboys That Load Front & Rear... The Ultimate In Versatility!

%H SUHSDUHG IRU DQ\ ORDGLQJ VLWXDWLRQ ZLWK RXU GSL/BR VHULHV RI ORZER\V

35 GSL/BR

&$3$&,7< OEV

35 Ton Detachable Gooseneck Wetline, Dual Axle Single Point Suspension, W/Beavertail and Ramp (Optional Air Ride)

50 GSL/BR

&$3$&,7< OEV

50 Ton Detachable Gooseneck, Three Axle Air Ride, W/Beavertail and Ramp

Lowest Loading Angle Available!

35 GSL/PT &$3$&,7< OEV

35 Ton Detachable Gooseneck Wetline, Dual Axle Air Ride Suspension, with 4' Rear Riser, Wheel Covers,Taper Beam Design

50 GSL/PT Lowest Loading Angle Available

&$3$&,7< OEV

50 Ton Detachable Gooseneck Wetline, Tri Axle Air Ride Suspension, with 4' Rear Riser, Wheel Covers, Taper Beam Design

70

th

ANNIVERSARY Visit our web site at EagerBeaverTrailers.com and you're a "click" away from getting all the information you need from our nearest dealer, or call 1-800-257-8163

1946-2016 >> EagerBeaverTrailers.com


Page 94 • April 28, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Felling Provides Solution for Rental Company’s Contractor

A renewable energy contractor working on a solar project that spanned several locations in its coverage area needed several heavy-duty triple reel trailers capable of hauling three 97 in. dia. by 77 in. by 10,000 lbs. wide reels for medium voltage (MV) underground cable.

Recently, a national heavy equipment rental company and longtime customer of Felling Trailers was faced with a dilemma. One of its national accounts, a renewable energy contractor, was working on a solar project that spanned several locations in its coverage area. It needed several heavy-duty triple reel trailers capable of hauling three 97 in. dia. by 77 in. by 10,000 lbs. wide reels for medium voltage (MV) underground cable. Lead-time was of the utmost importance. With the solar projects in progress, the trailers were needed inside of a 4-week time frame. Standard build time for a reel trailer needing to carry three reels weighing 10,000 lbs. each would be 10-weeks or longer when starting with a new build. That kind of timeline was not acceptable. Felling Trailers stocks millions of dollars of trailer inventory in various configurations/builds. The national rental company had utilized Felling Trailers’ stock inventory

in the past and knew it could assist this time around too. When the rental company spoke to its Felling Trailers’ account rep., he put them in touch with Mark Rapp, Felling Trailers’ Utility & Telecom Product Specialist. After learning the project’s details, Rapp suggested the FT-30-2 LP (low profile) a 15ton tag trailer. The FT-30-2 LP is a Felling Trailers model that is a standard inventoried trailer and would be a perfect model to convert to a heavy three-reel hauler. The FT-30-2 LPs were mounted with a one-piece, three-reel rack assembly bolted directly to the flat deck surface. The reel rack assembly was manufactured with 3 in. by 3 in. heavy wall steel tubing. The assembly was equipped with a 2.88 in. diameter reel bar that spins on a 660 SAE continuous cast bronze bushing saddles. The reel bars were fitted with a cross arm to tie the reel spool to the reel bar and a locking collar to keep the

reels centered. Both the cross arm and locking collar are equipped with lifting hooks to safely aid in loading/unloading reels onto the rack assembly. The renewable energy contractor uses the triple reel FT-30-2 LP units to bring the power from the solar fields. The rental company has ordered eight of these trailers that have gone directly to the job sites and are presently ordering the reel rack/trailer package for its rental inventory. Along with the FT-30-2’s, the rental company recently added a set of FT-24-2 LP triple reels with smaller and lighter reels for the contractor’s task of providing conductor for the substations the main feeds are brought to or the solar project. Cross-functionality, a removable reel rack on an equipment trailer ensures the trailer will remain utilized throughout its life. Too many times, a dedicated reel trailer is pur-

The assembly was equipped with a 2.88 in. diameter reel bar that spins on a 660 SAE continuous cast bronze bushing saddles. The reel bars were fitted with a cross arm to tie the reel spool to the reel bar and a locking collar to keep the reels centered.

chased for a specific application/project. When that job is complete, the reel trailer sits. This package allows the reel rack to be easily removed, and the trailer can then be used to haul equipment, materials, etc. When the need again arises, the reel rack assembly is easily placed back on the trailer and mounted to the trailer deck. For more information, visit www.felling.com. 

Trail King Announces New Additions to Dealer Network Trail King Industries, a North American trailer manufacturer, continues to expand its dealer network. Recently, the company announced the addition of two new dealers to its network: • Vermeer Mid Atlantic LLC — Baltimore, Md. • TNT Sales — Villa Ridge, Mo. “We are honored to have these new dealers as part of the

Trail King family,” said Rick Farris, VP of sales and marketing. “Our nationwide network of dealers is one of our most valuable assets. Both of these dealers will bring a well-established presence to the customers in their market.” Trail King Industries Inc., is headquartered in Mitchell, S.D. The company designs, engineers and manufactures a

complete line of trailers ranging in load capacities from 12,000 to 1,000,000 lbs. Trail King trailers serve a wide variety of applications for markets as diverse as construction, agriculture, transportation, waste and recycling, and specialized hauling. For more information, call 800/843-3324 or visit trailking.com. 


Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • April 28, 2021 • Page 95

What can you haul in a side dump trailer? Nearly anything.

Superior Stability

Faster Cycle Times

Easier Unloading

With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com


Page 96 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Prinoth Unveils Next Generation Panther Rotating Dumper

Prinoth unveiled the next generation of the Panther T14R crawler carrier. Prinoth has increased the Panther’s speed and power, while adding a host of new features designed to boost uptime and operator performance.

Move More, Faster The next-generation builds upon the speed/payload combination of the Panther T14R. A boost in speed of up to 5 percent, coupled with the T14R’s payload, further increases its productivity. And, company officials say, it demonstrates Prinoth’s commitment to providing the highest productivity levels for off-road construction projects. “Everyone knows that bigger payloads and faster cycle times deliver more productivity and bigger profits, and at Prinoth, we’re dedicated to helping our customers get more for their investment,” said Patrick Hébert, product manager of the Panther. “That’s why we worked hard as a team to provide not only exceptional payload, but also the best

payload-to-weight ratio in the industry. With this next generation, we now offer a 15 percent advantage in this critical category over our closest competitor by carrying less dead weight.”

Direct Visibility, All-Around Safety The T14R’s overall architecture was redesigned to offer visibility gains, making it safer for everyone on the job site, while increasing the operator confidence and, in turn, productivity. Unrestricted cab views will provide safety for operators and other workers. Accidents can seriously impact productivity, and safety innovations are an important way to prevent them. Producing New Benefits for Operators The new T14R also provides operators with enhanced comfort and intuitive features that make easy work during long shifts. For example, new warning systems on the enhanced in-cab display allow operators to confidently take on

generation of Panther vehicles is now driven by Cat’s double-label engine model C7.1 EPA Tier IV Final/EUROMOT Stage V, supporting Prinoth’s Clean Motion philosophy for sustainability. Clean Motion is the company’s forward-thinking corporate philosophy synonymous not only with low energy consumption but also with environmental protection in ecologically sensitive areas. Operators also will appreciate an exclusive single-touch drivedirection reset for effortless turnarounds and improved settings of the hydrostatic drive motor, which optimizes high travel speed and responsiveness under high-torque The T14R’s overall architecture was redesigned to offer visibility demand. gains, making it safer for everyone on the job site, while increas“Our engineers achieved what ing the operator confidence and, in turn, productivity. few thought possible,” said Ferrari. “They made the world’s fastest challenging conditions. crawler carrier even faster. The “We didn’t just make the Technology Upgrades safest carrier even safer. The easimachine more efficient,” said Prinoth engineers also carried est even easier. And the cleanest Alessandro Ferrari, Prinoth CEO. out upgrades inside of the Panther, even cleaner. In other words, the “The advancements found in this including a new engine and a first- best is now even better.” new generation of Panther make of- its kind drive-direction reset. For more information, visit operators more efficient as well.” Without sacrificing power, the new www.prinoth.com. 

Komatsu PC88MR-11 Delivers Low-Cost Power, Fast Cycles

Komatsu's PC88MR-11 excavator features a reduced tail swing radius, making it ideal for work on roadways, bridges, urban areas or anywhere space is limited. The 67.7 hp (50.6 kW) excavator has standard high flow auxiliary hydraulics with proportional joysticks that offer increased job versatility, while providing precise attachment control. Standard grading blade with new moldboard profile improves backfilling and light grading efficiency. Designed to excel in underground utility or general construction in urban environments, the PC88MR-11 short tail swing excavator is more at home in confined spaces than a conventional excavator, according to the manufacturer. Its swing boom design allows digging parallel to buildings or barriers.

Fuel Efficient, Low-Cost Power The new high-efficiency power package and viscous fan clutch work together to lower overall fuel consumption by up to 13 percent. The smart, simplified catalytic system removes soot without a diesel particulate filter, for lower maintenance and lower cost of ownership.

Fast Cycles, Custom Modes Faster boom up/swing speed, combined with responsive quick arm speed, makes excavating and leveling work easier

The 67.7 hp (50.6 kW) excavator has standard high flow auxiliary hydraulics with proportional joysticks that offer increased job versatility, while providing precise attachment control.

and more efficient with the PC88MR-11. Six working modes let the machine be tailored to the tasks required, whether for performance or fuel savings.

Maximum Operator Comfort Operators work comfortably in a quiet, climate-controlled cab featuring air suspension seat, Bluetooth radio, and highresolution monitor with rearview camera. The sliding cab

door makes entry and exit easier in confined spaces and LED lights provide excellent vision at night. Quick, Easy Maintenance Periodic maintenance is accessible and efficient with large service access doors and grouped service points with ground-level access. For more information, visit www.komatsuamerica.com. 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 97

LLO OAD OA AD DU UP TO UPT

*

Operating Cappacity 1,050 to 4,2000 lbs.

w Rate Finance 0% Low Opttions Available 17 Loaders

35 - 120 hp options

CONTTACT A YOUR LOCAL GEHL ACT HL DEALER R TODA AY! Y!

sales@admarsupply.com www.admarsupply.com

www.allislandequipment.com 39 Jersey Street West Babylon, NY 11704 631/643-2605

www.NorrisSales.com

878 Old Albany Shaker Road Latham, NY 12110 518/690-0750

1394 Military Road Tonawanda, NY 14217 716/873-8000

3001 West 17th Street Erie, PA 16505 814/833-7761

7800 Brewerton Road Cicero, NY 13039 315/433-5000

449 Commerce Road Vestal, NY 13850 607/798-0333

2390 Rochester Road Canandaigua, NY 14424 585/396-0031

1950 Brighton Henrietta Town Line Road Rochester, NY 14623 585/272-9390

121 Armstrong Road Pittston, PA 18640 570/299-5505

*AT PARTICIPATING DEALERS. EXPIRES .3 .21

SOLID DESIGN SOLID DES SIGN

1010 Conshohocken Rd. Conshohocken, PA 19428 610/279-5777 1-800/457-RENT (7368)

668 Berlin Cross Keys Road Sicklerville, NJ 08081 856/740-1400 866/80-TOOLS (86657)


Page 98 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Above. Ahead. Always.

Visit demagmobilecranes.com to find your local distributor. 7021 Performance Drive N. Syracuse, NY 13212 800-342-7575

12 Mear Road Holbrook, MA 02343 508-868-7734

9 Finderne Avenue, Ste 7 Bridgewater, NJ 08807 908-203-0400

www.empirecrane.com

Authorized Cranes Distributor © Tadano Demag GmbH 2019. Demag is a trademark of Demag IP Holdings GmbH.

John Deere Rolls Out New Performance Tiering Strategy 1

Developed in response to evolving customer needs and expectations, John Deere launched its Performance Tiering Strategy, delivering a range of products at different levels of capability and user experience. Available first on the wheel loader lineup, the Performance Tiering Strategy supports customers by providing machine solutions built for various applications and jobs to enhance profitability and efficiency. Moving away from the traditional series letter designations, the Performance Tiering Strategy provides three tiers of machines — G tier, P tier and X tier. “Every job site is unique, and customers want machine solutions that can be personalized to meet their diverse needs, including performance, price and comfort,” said Jason Daly, global director, production systems, technology and marketing, John Deere. “By offering three tiers, customers can move up or down the spectrum to find the right mix of features, performance and innovation for their business and application.” The Performance Tiers are defined as: • Adding a premium edge, the X-tier models are built with the most innovative John Deere technology and features, delivering the highest levels of productivity, efficiency and customer experience. • P-tier models can be counted on to produce at high levels, day in and day out. Advanced features deliver exceptional performance, efficiency, comfort and service life in demanding, high-production applications. • The G-tier models are practically equipped and economical, providing proven capabilities with the reliability and

0

ruggedness expected from John Deere. These machines are ideal for customers in need of a reliable machine to complete common light- to medium-duty tasks. The 444-724 P-tier machines reflect the performance capabilities and features that most customers expect from John Deere, such as those found on the current L-Series wheel loaders, including a redesigned cab, standard parallel lift Z-Bar loader linkage, high-lift plus option, electrohy-

A

The G-tier models are practically equipped and economical.

12:49

draulic controls and dual return-to-dig settings. A highly productive and efficient 5-metric-ton wheel loader, the 644 Xtier features E-Drive technology, comprises a diesel-electric drivetrain and exemplifies the type of innovative features that distinguish the X tier, according to the manufacturer. The 644 G-tier is the first model to be available in the lineup of G-tier wheel loaders. Leveraging proven components and technologies, the 644 G-tier is equipped with an all-new cab designed to boost operator comfort and productivity. Customers can customize the machine through a variety of base-level packages, including axles, tires, ride control, seats, radio and rear chassis work-light selections. With the 644 G-tier machine, John Deere delivers a solution ideal for light to medium construction jobs, such as stockpiling, short load-and-carry, truck and hopper loading, and material handling. Designed and manufactured by John Deere, all tiered machines are backed by the same level of support that customers have grown to rely on — including John Deere Connected Support and a five-year subscription to JDLink. Customers can distinguish the different levels of tiering by not only the attributes and capabilities, but also by the distinct branding and design cues on the machines. The John Deere X and P machines are now available for purchase in the United States and Canada, and the 644 G machine is available in Canada and other global markets. Other product categories will follow the Performance Tiering Strategy over time. For more information, visit www.JohnDeere.com/Findyourfit. 


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 99

Abele Tractor & Equipment Co., Inc. www.abeletractor.com Albany, NY 12205 518/438-4444 Cherry Valley Tractor www.cherryvalleytractor.com Marlton, NJ 08053 856/983-0111 Erb & Henry Equip., Inc. www.erbhenry.com New Berlinville, PA 19545 610/367-2169

ADMAR Construction Equipment & Supplies www.admarsupply.com Vestal, NY 13850 607/798-0333 Tonawanda, NY 14217 716/873-8000 Canandaigua, NY 14424 585/396-0031 Rochester, NY 14623 585/272-9390 Cicero, NY 13039 315/433-5000

F&W Equipment www.fwequip.com Orange, CT 06477 203/795-0591

Marshall Machinery, Inc. www.marshall-machinery.com Honesdale, PA 18431 570/729-7117 Swiftwater, PA 18370 570/895-4884 Middletown, NY 10940 845/343-6683 South Abington Township, PA 18411 570/489-3642

Reading Tractor and Equipment www.readingtractor.com 5538 Pottsville Pike Leesport, PA 19533 610/926-2441

Westchester Tractor Inc. www.wtractor.com Brewster, NY 10509 845/278-7766

Eagle Power & Equipment Company www.eaglepowerandequipment.com West Chester, PA 19380 610/458-7054 Doylestown, PA 18901 215/348-9041

Chappell Tractor www.chappelltractor.com 454 Route 13 South Milford, NH 03055 603/673-2640 ABLE Equipment Rental www.ableequipment.com Deer Park, NY 11729 866/468-2666 631/841-3333 Highway Equipment Company www.highway-equipment.com Millstone Township, NJ 08535 732/446-7600


Page 100 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Efficient High Capacity Cobra Screening Bucket model K15 for 16 21 ton excavators, Effectively Screen Soil, Compost, Millings, Demo Waste / save on hauling / dumping costs Excavator, Backhoe & Loader Buckets, New & used, over 500 in stock, also Grapples, Thumbs & other attachments

C&S Equipment Co. 609/267-0782

9-10 AP

NEW AND SURPLUS STRUCT. STEEL JUMBO BEAMS, PIPE, ROAD PLATE Joseph Fazzio Inc.com • 856-881-3185 N.J.

BUCKETSBOX: GRAVEL, BEDDING BOXES DUMP HOPPERS SKID STEER ATTACHMENTS

9-10 TM

EXCAVATOR, MINI EXCAVATOR & BACKHOE BUCKETS ALL FULLY DRESSED W/ PINS & SIDE CUTTERS

Joseph Fazzio Inc.com • 856-881-3185

9-10 TM

NATION’S LEADING EXTREME SERVICE SPECIAL APPLICATION BUCKETS Hundreds in Stock - Variety Sizes - Many Models Call Emilee 218-863-6444 9 AP Email: ai@attachmentsintl.com

888-280-1710 9-10 JP

96” X 240” & LARGER ALL THICKNESSES - PREMIUM GRADE A570-50 ALSO - LARGE STEEL ANGLES JFISTEEL.COM • 856-881-3185 9-10 TM

PLATE

Ritchie Introduces New Team: Rouse Appraisal Services For decades, both Ritchie Bros. and Rouse Services have been serving the equipment and truck industries with their respective appraisal businesses. With Ritchie Bros.’ acquisition of Rouse last year, the company has now combined these two appraisal businesses into one team with unrivalled hands-on equipment experience, knowledge and data. “Our appraisers are armed with the richest dataset anywhere in the industry,” said Raffi Aharonian, managing director, Rouse Appraisals. “We can also directly connect customers to Ritchie Bros.’ disposition solutions, should they choose to go that route post appraisal.” Rouse Appraisal Services will offer appraisals and detailed inspections for a wide variety of use cases, including asset based lending, company and contractor driven needs, M&A support and residual values for leasing institutions. “Our goal is to help customers through all stages of an asset’s life cycle, whether that be purchase, inspection, appraisal or sale,” added Aharonian. “All these services are available through Ritchie Bros.’ end-to-end asset management and disposition system: RB Asset Solutions.” For more information on Rouse Appraisal Services, visit rouseservices.com/solutions/appraisals. For more information on Ritchie Bros. Asset Solutions, visit rbassetsolutions.com. 

Takeuchi Takes Wraps Off of Spacious New Training Center Lowboy Trailer Pin On Flip Axles, In Stock, 275/Tires, Aluminum Wheels 610/534-0700 John at Stephenson Equipment 9-10 TM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 9-10 EB 866-294-6103

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine(one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. Additional $25 to place online • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Northeast States. For more information, call Construction Equipment Guide today at

800/523-2200

TAKEUCHI from page 34

Tom Crow, chairman of the Jackson County Board of Commissioners, also addressed the group. “We appreciate Takeuchi choosing Jackson County as the site of its U.S. headquarters,” Crow said. “Local contractors and other equipment owners and operators worldwide have come to truly value Takeuchi’s top-quality machines. We couldn’t be more pleased to have Takeuchi as one of our leading corporate citizens.” Stewart and Crow were then joined by Keith Kramlich, product and training manager for Takeuchi-US, and James Tipton of Tipton Construction, whose company built the new training center. Stewart performed the ceremonial ribbon cutting and invited those assembled to come inside for refreshments and tours of the new facility. “Our employees, dealer partners and customers are key to Takeuchi’s success,”

Kramlich said. “With this incredible, new, state-of-the-art facility, we’re ready to take our training to the next level and help even more people discover the difference that Takeuchi machines can make on their productivity, safety and bottom lines.” Courses that will be offered at the Takeuchi Training Center include instructorled, intermediate-level technical trainings for both compact track loaders and compact excavators with simultaneous classes starting in May 2021. These classes will cover general machine layout, electrical and hydraulic component location and function, general engine controls and exhaust aftertreatment systems on all products. Soon, Takeuchi also will offer quarterly sales training for dealers as well as advanced technical training. Beginner-level courses will be offered online via Takeuchi’s Learning Management System. For more information, visit www.takeuchi-us.com. 

Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 101

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING FOR USED HITACHI EXCAVATORS LIKE EX200, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET ––––––––––––––––––––––––––––––––

WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. KINDLY SEND US YOUR OFFERS IF ANY AVAILABLE. THANKS. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. IF YOU HAVE ANY UNITS AVAILABLE PLEASE LET ME KNOW. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): CAT 966F & CAT 966F II. IF ANY ONE HAS ONE AVAILABLE PLEASE LET ME KNOW. THANK YOU. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03350237541 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE BULLDOZER 700JXLTT OR 700JLGP UNDER 900 HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA; PHONE: 1-450-346-8975 ––––––––––––––––––––––––––––––––

WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS; I AM LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODLES BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S3 OFF-HIGHWAY TRUCKS - LOOKING FOR REAR END DIFFERENTIAL FOR 30TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (US): NEED CAT 966F WHEEL LOADER ANY CONDITION IS PREFERABLE. OFFER US ANY CONDITION YOU HAVE AVAILABLE. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 ––––––––––––––––––––––––––––––––

WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR 966F II WHEEL LOADER; LOOKING TO BUY CAT 966F 2 ANY CONDITION. EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR EXCAVATORS – WHEEL LOADERS, GRADERS, ALL MODELS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. ––––––––––––––––––––––––––––––––


Page 102 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Online Auction April 29, 2021 For: Late Model Cat, Case, John Deere, Volvo Construction Equipment (Mexico)

• Southeast Regional Event June 29, 2021 • Chehalis, WA June 29, 2021 AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401

• Salem, NH April 30, 2021 For: Construction and Bridge Equipment

• ONLINE ONLY May 3 - 9, 2021

• Dallas, TX May 5, 2021 For: Rental Fleet Construction Equipment, Trucks, Trailers

• ONLINE ONLY May 17 - 23, 2021

• Buffalo, NY May 14, 2021 For: Large & Medium Construction Equipment & more

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• Delaware, OH May 15, 2021 For: Late Model Construction Equipment & more

• ONLINE ONLY May 10 - 16, 2021

• ONLINE ONLY May 4, 2021 • ONLINE ONLY May 11, 2021

• ONLINE ONLY • Canastota, NY May 18, 2021 May 16, 2021 • ONLINE ONLY For: Lawn, Garden & Construction May 25, 2021 Equipment Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Edmonton, AB May 3-7, 2021 • Toronto, ON May 11-13, 2021 • Fort Worth, TX May 18-19, 2021 • Tipton, CA May 19, 2021 • Orlando, FL May 20, 2021 • Chilliwack, BC May 25-26, 2021 • Montreal, QC May 26-27, 2021 • Rocky Mtn Regional Event May 26-27, 2021 • Williston, ND June 2, 2021 • Phoenix, AZ June 4, 2021 • Saskatoon, SK June 8-9, 2021 • Sacramento, CA June 9, 2021 • Las Vegas, NV June 11, 2021 • Houston, TX June 15-16, 2021

BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY April 28, 2021 • ONLINE ONLY May 5, 2021 • ONLINE ONLY May 12, 2021 DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., May 8, 2021 For: Construction Auction DEANCO AUCTIONEERS www.deancoauction.com 601-656-9768 • Philadelphia, MS May 26 - 27, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS July 21 - 22, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Sept. 15 - 16, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS Nov. 17 - 18, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction

• Great Plains Regional Event June 17, 2021 • Northeast Regional Event June 22-23, 2021 • Great Lakes Regional Event June 24-25, 2021 • Los Angeles, CA June 25, 2021

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Crown Point, IN April 29, 2021 DBS Construction Absolute Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• Gillsville, GA June 8, 2021 For: Contractor Inventory Reduction Public Auction-Simpson & Simpson, LLC, and Others, Live & Online • Kissimmee, FL June 12, 2021 For: Late Spring Construction & Transportation Public Auction

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • ONLINE ONLY – DAY 1 Thurs., April 30, 2021 For: 12th Annual Spring Auction • Windsor Locks, CT – DAY 2 Sat., May 1, 2021 For: 12th Annual Spring Auction

• Madison, IN May 4, 2021 INDOT Spring Auction

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

• Fort Wayne, IN May 11, 2021 INDOT Spring Auction

• ONLINE ONLY Wed., May 19, 2021 For: Heavy Equipment, Truck & Trailer Auction

• Pelzer, SC June 24, 2021 For: East Coast Spring Construction & Transportation Public Auction

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

MEEKINS AUCTION COMPANY www.meekinsauction.com 910-739-0547

• Sioux Falls, SD April 23 - 30, 2021 For: Spring Consignment Auction, Various locations near Sioux Falls

• Plymouth Meeting, PA April 28, 2021 For: Heavy Equipment Trucks and Vehicles

• Raleigh, NC Thurs., May 20, 2021 For: Absolute Auction – Currin Brothers Retiring

J. STOUT AUCTIONS www.jstoutauction.com 888-897-8864

NITKE AUCTIONS www.nitkeauctions.com 715-539-6295

• ONLINE Thurs., May 27, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More

• Wausau, WI April 29-30, 2021 For: 2-Day WI Contractors Spring Auction

• ONLINE Thurs., June 24, 2021 For: Heavy Equipment, Commercial Trucks, Trailers & More

PROXIBID www.proxibid.com 877-505-7770

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246

• ONLINE Thurs., April 29, 2021 For: Live Truck & Trailer

• Winamac, IN May 18, 2021 INDOT Spring Auction • Pendleton, IN May 18, 2021 29th Annual Summer Auction • Pendleton, IN September 17, 2021 29th Annual Fall Auction DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853 • Stoutsville, OH May 8, 2021 For: Spring Columbus Heavy Equipment Truck & Trailer Auction FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Sparta, WI April 22 - 28, 2021 For: Earthmoving, Quarry & Asphalt Paving Equipment

• Archbold, OH • ONLINE ONLY May 21, 2021 June 3 - 10, 2021 For: NW Ohio Contractors Auction For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 11, 2021 For: Truck, Trailer & Equipment Auction

• ONLINE ONLY August 5 – 12, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

• ONLINE Wed., April 28, 2021 For: Live Virtual Absolute

• ONLINE Thurs., April 29, 2021 For: 2-Ring Public Live Online • ONLINE Sat., May 1, 2021 For: Absolute Equipment • ONLINE Tues., May 11, 2021 For: Oilfield, Trucks & Construction Equipment

• ONLINE ONLY September 30 – October 7, 2021 For: Heavy Equipment, Contractors • ONLINE Equipment, Trucks & Vehicles Fri., May 14, 2021 For: Heavy Equipment & Trucks • Marietta, PA • ONLINE ONLY Fri., August 13, 2021 December 2 - 9, 2021 For: Heavy Equipment, Contractors For: Truck, Trailer & Equipment PURPLE WAVE AUCTION Equipment, Trucks & Vehicles Auction www.purplewave.com 866-608-9283 JEFF MARTIN AUCTIONEERS, INC. • ONLINE HUNYADY AUCTION COMPANY www.jeffmartinauctioneers.com www.Hunyady.com Wed., April 28, 2021 601-450-6200 For: Ag Equipment Auction 215-361-9099 • Hamilton, OH • ONLINE • Meadville, PA May 11, 2021 Thurs., April 29, 2021 Wed., April 28, 2021 For: Ohio Construction & For: Truck & Trailer Auction For: Live, Virtual Absolute Auction Transportation Equipment Public Pipeline Systems Surplus • ONLINE Auction Liquidation Thurs., May 6, 2021 • Brooklyn, MS For: Construction Equipment • Glenville, PA May 21 - 22, 2021 For: Construction & Transportation Wed., May 19, 2021 For: Buffalo Construction Absolute Equipment Public Auction – Live ROSEN & COMPANY, INC. & Online Bidding Auction Virtual/Live Broadcast www.rosenandcompany.com • Newton, NH 216-990-1831 • Boonsboro, MD June 5, 2021 Thurs., June 3, 2021 • Cleveland, OH For: Northeast US Live & Online For: Virtual/Live Broadcast for Fri., May 28, 2021 Public Auction For: Spring Construction Auction David M. Merchant, Inc.

• ONLINE May 7 - 12, 2021 For: Upper Midwest Locations • Keene, ND May 12 - 19, 2021 For: Rink Construction Retirement Auction • Alexander, ND May 18 - 25, 2021 For: Lupine Construction Inc. Equipment Reduction Auction • Litchfield, MN June 8 - 16, 2021 For: Litchfield Farm Equipment Auction VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • ONLINE ONLY Sat., May 22, 2021 For: Heavy Construction Equipment, Trucks & Trailers WAUSAU ACTIONEERS www.wausauauctioneers.com 800-432-1922 • Coloma, WI Thurs., May 13, 2021 For: Dehling Construction, LLC Land Clearing Contractors WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • ONLINE ONLY Sat., May 8, 2021 For: Public Auction • ONLINE ONLY Sat., June 12, 2021 For: Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • US Locations May 6, 2021 For: Various US Locations • Kissimmee, FL May 19, 2021 For: Heavy Equipment Auction


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 103 www.AuctionsInternational.com

31

1.800.536.1401 YOUR ONLINE LIQUIDATION MARKETPLACE

Heavy Equipment Trucks

Important Auctions

315.633.2944 • www.lyonauction.com • www.lyonauctionlive.com

Road Maintenance Utility Equipment

AUCTION CALENDAR

Trailers Much More...

BIG or SMALL we sell it ALL! Virtual equipment showroom. Hassle free process. Accredited auctioneers. Hundreds of assets. Check us out today!

@auctionsinternationalinc

www.AuctionsInternational.com

P

T

ccc{ O]PG <G ;G >{ <RO

follow

us on

@Lyo nAuc tion!

Go to WWW.LYONAUCTION.COM for START-STOP times on TIMED / VIRTUAL AUCTIONS 1.

TIMED: Thursday, April 29: QUERETARO, MEXICO: Late Model Cat, Case, John Deere, Volvo Construction Equipment, Aerial Lifts, Forklifts, Trucks and Trailers, Large Quantity Attachments & Support Equipment. 2. LIVE: Friday, April 30: SALEM, NEW HAMPSHIRE: Construction and Bridge Equipment, Aerial Lifts, Forklifts, Air Compressors, Trucks, Trailers, Large Amount of Accessories and Support. 3. LIVE: Wednesday, May 5: DALLAS (Ft. Worth), TEXAS: Rental Fleet Construction Equipment, Trucks, Trailers, Attachments and Support. 4. LIVE: Friday, May 14: BUFFALO, NEW YORK: Acquisition Auction. Large and Medium Construction Equipment, Utility Equipment, Aggregate, Trucks, Trailers, Attachments and Support. 5. LIVE: Saturday, May 15: DELAWARE, OHIO: Late Model Construction, Utility Equipment, Aerials, Forklifts, Dump Trucks, Truck Tractors, Straight Frame Trucks, Pickup & Service Trucks, Support Equipment. HIGHLIGHTS: (2)2020 Freightliner(6-axle Dump), 2018 Western Star(6-axle Dump), (10)Multi-Refrigerated Trailers(3-Section), (2)2020 John Deere 244L, Kubota SVL95 Skid Steer. 6. LIVE: Sunday, May 16: CANASTOTA, NEW YORK: Lawn & Garden & Construction Equipment Auction. Primarily Midi Sized Excavators, Skid Steers etc. Plus Quantity Compact Tractors, Landscape Equipment, Commercial & Riding Mowers, Tillers and Skid Steer Attachments. 7. LIVE: Friday, May 21: RACINE, WISCONSIN: Late Model Construction Equipment(Rentals). Dump Trucks, Truck Tractors, Pickups, Trailers, Attachments and Support. 8. LIVE: Thursday, May 27: BREWERTON, NEW YORK: Turn Key Restaurant & Bar, Generators, Lawnmowers. 9. LIVE: Saturday, May 22: LIMESTONE, MAINE: PHASE II. Former Loring Air Force Base. Construction Equipment, Aerials, Attachments New & Used Support, All Types of Trucks and Trailers. 10. LIVE: Saturday, June 5: ROCHESTER, NEW YORK: Retirement Auction, 1 Owner Complete Liquidation. One of the Finest Masonry Contractors in the Northeast, The Best of the Best Equipment, Vehicles and Especially the Support and Attachments. HIGHLIGHTS: Genie S-85, Genie 65' Manlift, Genie 45' Manlift, Genie 40' Boom Lift, Genie Rough Terrain Forklift, Komatsu Warehouse Forklift, Gehl Skid Steer, IR Air Compressor, Kaeser Air Compressor, Rough Terrain Scissor Lift, JLG Electric Scissor Lift, Electric Scissor Lift, Kubota Mini Excavator, Dump Truck, 2015 GMC, 2018 Isuzu Stake Body, 2008 GMC, P&J 22' Flatbed Trailer, Dump Trailer, Water Trailer, Covenant 24' Trailer, Royal 12' Trailer, 60W Standby Generator. 11. LIVE: Wednesday, June 9: PLAINFIELD, CONNECTICUT: Property is Sold. Late Model Construction and Aggregate Equipment, Trucks and Trailers, Attachments, Support. The Best of The Best of The Best. 12. LIVE: Thursday, June 10: PASSAIC, NEW JERSEY: Retirement, Complete Liquidation. Mack Trucks, Trailers, Support, Shop Equipment, Parts. 13. LIVE: Friday, June 11: MIDDLETOWN, NEW YORK: Very Major Job Completion of a Major Local Amusement Park. HIGHLIGHTS: 18 Motor Scrapers: (4)2011 Cat 621G, Cat 637D, (2)Cat 631E, (3)Cat 621F, (2)Cat 621E, (3)Cat 621B, (3)Cat 627B, Vermeer 175 Commander, Vermeer Navigator D36X50, Cat 980C, Cat D11N, (2)Cat D9N, Cat D9G, (2)Cat D9L, Cat D8N, Cat D8L, (2)Cat 365BL, (2)Cat 345CL, Cat 330CL, PLUS: all Types Support Including Tractor Loader Backhoes, Skid Steers, Telescopic Forklifts, Boom & Scissor Lifts, Generators, Air Compressors, All Types Trucks and Trailers, Support and Attachments. 14. LIVE: Saturday, June 12: LAS VEGAS, NEVADA: Late Model Rental Construction, Utility Equipment, Telescopic & Warehouse Forklifts, Large Quantity Boom & Scissor Lifts, Light Plants, Generators, Welders, Air Compressors, Pickups, Trailers and Support Equipment. 15. LIVE: Sunday, June 13: MAHWAH, NEW JERSEY: Very Large Stone Wholesale Business. Over 600 Pallets of the Finest Stone. 16. LIVE: Wednesday, June 16: HOUSTON, TEXAS: Late Model Construction Utility Equipment, All Types of Forklifts, Aerial Lifts, Truck Tractors, Pickups, Cab & Chassis, Attachments and Support Equipment.

17.

LIVE: Saturday, June 19: ATLANTIC CITY, NEW JERSEY: Very Late Model Construction, Utility, Rental Fleet Equipment, Aerial Lifts, Boom & Scissor Lifts, All Types of Forklifts, Attachments, Support, Truck Tractors, Dump Trucks, Service & Utility Trucks, Water Trucks, Pickups, Garbage Trucks and more.

18.

LIVE: Thursday, June 24: SYRACUSE, NEW YORK: Construction Equipment Dispersal and Real Estate Including 4 Apartments, Single Family Home and New Multi Storage Unit.

19.

LIVE: Saturday, July 17: CANASTOTA (Syracuse), NEW YORK: In Conjunction with The Famous Alex Lyon & Son Haycamp & Barbecue. The Fanciest Late Model Construction Equipment, Aerial Lifts, Telescopics, Attachments, Support, Truck Tractors, Dump Trucks, All Types of Trailers. The Fanciest & Best Equipment Ever Assembled for Public Auction.

20.

LIVE: Saturday, July 31: ALBANY, NEW YORK: Retirement Auction. Large Quantity of Everything-Construction Equipment, All Types of Trucks, Garbage Trucks and Large Amount of Support Equipment.

21.

LIVE: Wednesday, August 4, & TIMED: Thursday, August 5: SYRACUSE (Pompey), NEW YORK: In Conjunction with Lee Publications & Empire State Farm Show. Late Model Agricultural & Construction Equipment, Trucks(all types), Trailers, Attachments, Large Quantity Support Equipment.

22.

LIVE: Friday, September 10: PITTSBURGH, PENNSYLVANIA: Late Model Cat, John Deere, Komatsu Earthmoving Equipment, Attachments, Support, All Types of Trucks & Trailers.

NEW DATES TO BE ANNOUNCED 23.

ATHENS (Knoxville), TENNESSEE: Four Prime Commercial Properties and Construction Equipment.

24.

PARKERSBURG, WEST VIRGINIA: Complete Retirement Auction. Approximately 100 Antique Collectible Cars and Trucks Plus Truck Tractors and Trailers, that were used to Transport the Collectibles Properly. Small Amount of Late Model Skid Steers, Mini & Midi Excavators.

25.

CLEVELAND, OHIO: Large Job Completion Auction. Large Quantity Construction Equipment Including: Cat D10R, Cat D6RLGP, JD, 650H, Cat 950F, Takeuchi TB260, Takeuchi TB250, Takeuchi TB180, Cat 320DL, Cat 245B, (3)JD 350G, Takeuchi TL10, Takeuchi TL8, Special Wirtgen 2500, Trucks(all types), Trailers, Support, Attachments.

26.

CENTRAL CONNECTICUT: Retirement Auction. Over 51 years in Business. Construction, Utility, Aggregate Equipment, Dump Trucks, Truck Tractors, Service & Pickups, Various Trailers, Large Quantity Attachments and Shop Equipment.

27.

NEW ENGLAND: Retirement Auction (over 70 years of collecting only the best). One of the Finest Collections of Antique Construction Equipment: Cat, Holt, JD, IH. Ag Equipment, Truck Tractors, Dump Trucks (Everything is Beautiful and Operating), Collectible Toys, Dolls, Large Quantity of Parts. Never Before has there been a Sale Like This.

28.

LINCOLN, MAINE: Two Major Job Completions. 1 Very Large Forestry Featuring All Types of Logging Equipment and Trucks, and 1 Large Construction Equipment Spread of Later Model Cat, Komatsu, John Deere, New Holland Earthmoving Equipment, Forklifts, Aerials, Generators, Air Compressors and more.

29.

PORTLAND (Auburn), MAINE: Retirement Auction. Late Model Cat, Komatsu, Case, Volvo Construction Equipment, Plus Telehandlers, Generators, Boom & Scissor Lifts, Trucks, Trailers and Support.

30.

FAYETTEVILLE, ARKANSAS: Late Model Construction, Utility, Compact Equipment, Agricultural Tractors & Farm Implements, Large Quantity Landscape Equipment 0° Radius Movement, Utility Vehicles, 4-Wheelers and more.

31.

TORONTO, CANADA: Late Model Rentals of Agricultural Equipment, Construction Equipment, Attachments, Tools, Support, Various Trucks and Trailers.

www.lyonauction.com


ONLINE AUCTION

Page 104 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

By Order of Secured Creditor

Repossessed Equipment & More! Casale Construction Services, Inc.

Loaders, Backhoes, Excavators, Dump Trucks, Trailers, Attachments, New Skidsteer Attachments, Tools, Trucks, Vehicles & General Merchandise Inspection: Wed. May 19th 9:00 AM – 1:00 PM Bids Begin Closing: Fri, May 21st 11th 11:00 AM (ET) See Web Site for Details & Terms

CollarCityAuctionsOnline.com 888-222-1522 Licensed & Bonded Auctioneers & Real Estate Brokers

Selling or Buying: Join Our Site Today!


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 105

CONSTRUCTION AUCTION DAVIS AUCTIONS, INC. • SATURDAY, May 8, 2021 9:00 A.M. LOCATION: 210 CHESHIRE ROAD, RT. 68, PROSPECT, CT Davis Auctions, Inc. will be conducting our next auction of utility and construction equipment and related supplies on May 8, 2021. This auction will consist of excess equipment from the power companies, municipalities, and others to be sold in absolute. We will be accepting consignments through May 1. Please call to confirm space.

Early Consignments: EQUIPMENT

Excavator: DEERE 26G, w/Blade, Rubber Tracks, Aux. Hyd. Swing Boom; BOBCAT E20, w/Blade, Rubber Tracks, Aux. Hyd., Swing Boom, Expanding Undercarriage; KOMATSU PC15-2, w/Blade, Swing Boom, Padded Steel Tracks; Skid Steer Loader: DEERE 316GR, Rubber Tired; NEW HOLLAND L218, aux hyd., pilot controls; CASE SR250, aux. hyd., EROPS, pilot controls; CAT 289D, aux. hyd., rubber tracks; 2001 BOBCAT 773, aux. hyd.; Loader: KOMATSU WA180PT-MC; DRESSER 520C, JRB 416 Quick Connect, No Bucket; NELSON, Cummins 220 HP; Screener: TEREX Evoquip Colt 600 3 Way Split, Deutz TD2.9 4 Cyl. Dsl, 74 HP, Hydrostatic Drive, Remote Control, 12” Steel Tracks, 40” Hopper w/3.9 yd Material Shaker, low hours; Lifts: JLG 800AJ, 80’ Boom, Deutz 4 Cyl. Dsl, 4x4; 2008 GENIE Z60/34, 60’ Boom, Deutz Dsl, 4x4; SKYJACK MD3220 20’; Elec.; Roller: CATERPILLAR CS74 Single Drum; LEEBOY 400T Double Drum, Hatz Dsl; Landscape Equipment: FIRST PRODUCT AERA-VATOR AE60 w/Power Seed Box, Roller, Grooming Brush, 3PtH; 2019 KUBOTA T2290 Lawn Tractor, w/48” Mower Deck, gas 22 +/- hrs.; FORD 4610 Wheel Tractor, w/TMC Side Sickle Bar, 3 PtH, Dsl; TORO Groundmaster 455D 10’ Wing Mower; TORO Groundmaster 345 72” Mower; DEERE Zero Turn Mower; DEERE Lawn Tractor, w/Mower & Blower; INT’L Cub Cadet Lowboy 154 Tractor, 3 PtH; Wheel Loader Backhoe: CATERPILLAR 416C Turbo, 4x4; (3) DEERE 310SG, EROPS, Extend-A-Hoe, w/Buckets & Hyd. Hammers; Unused 48”- 84” Skid Steer Attachments: (2) Hammers; (2) Trenchers; (2) Tree/Post Pullers; (2) Augers, w/3 bits; (3) Root Rake Grapples; (4) Power Angle Snowplows; (3) Brush Mowers; (2) Rollers; Grapple; Snowblower; Broom; (3) Rototillers; (8) Skeleton Buckets; (4) Sets- 10’ Forklift Extensions; 2016 MCCONNEL 4’ Boom Mower; BOBCAT Sweeper; Pallet Forks; Light Towers: TEREX AL5HT, Kubota Dsl; MULTIQUIP Nighthawk LT12; GODWIN GLT416; Misc.: 2003 IR 185WJD Port. Air Compressor; PETTIBONE MERCURY Forklift; CROWN HEAT KING Mobil Glycol Heat System, Trailer Mtd; (2) MAC 550F Heaters, 5500 BTUs; Trailer Mtd, Isuzu Dsl; AGGREKO Mobile Heat Trailer, 700,000 BTUs, Kubota Dsl; MARKLIFT Elec. Lift; 4’ Asphalt Roller; Kubota Sweeper Attach.; Port. Solar Arrow Board; JRB 10' Plow, JRB 416 Quick Connect; (2) Unused Forklift Dumps; LAYMOR Sweeper, w/6’ Hyd. Angle Broom, Dsl; Call for more information: DAVIS AUCTIONS, INC. (203) 758-4087 or 1-800-201-4368 www.davisauctionsinc.com

BERCO Sweeper, Honda Eng.; BOMFORD 3 PtH 6’ Side Flail Mower, PTO; WOODS PRD8400 Finish Mower, 3PtH; (Unused) TITAN 6’ Landscape Rakes, 3 PtH; Excavator Thumb;

VEHICLES

Bucket Trucks: (2) 2012 DODGE 5500 Ram w/Altec AT37G Squirt Boom; (2) 2007 INT’L 4400, w/Terex HR50M Material Handler; 2001 FORD F550XL SD Crew Cab, w/ETC 37’ Bucket & Knapheide Ut. Body; (2) 2012 DODGE 5500 Ram w/Altec AT37G Squirt Boom, Bad Engine, Rusted; (2) 2010 FORD F750, w/Altec AT40 Squirt Boom, Bad Engine; 2006 INT’L 4400 w/Terex Telelect HR50M Material Handler, Dakota Ut. Body, 4 Outriggers, DT466, Boom Not Complete; 2003 FREIGHTLINER Boom Truck; 2001 STERLING Boom Truck; Utility Trucks: 2015 CHEV. 2500HD, w/Reading Ut. Body, Tommygate Lift Gate, Fisher Plow, 4x4; 2007 INT’L 4400; 2003 FORD F550, w/Mini Crane, 4x4; 2000 GMC 3500HD, w/Reading Ut. Body, Venturo ET6KR Crane; Box Trucks: 2000 INT’L 4900, DT466E, Dsl; 2000 FORD F650 SD; Dump Trucks: 2005 STERLING F/B S/A, Dsl; 1988 INT’L 2554 S/A, w/plow; Flatbed: 2005 STERLING Acterra; Mercedes Benz Powered; 2002 FORD F450XL SD, w/Reese Hitch, Triton V10; Pickups: 2015 CHEV. 2500HD Crew Cab, w/Side Boxes, Fisher Plow, Tommygate Lift Gate, Job Box, 4x4; 2013 CHEV. 1500 Ext. Cab, 4x4, Bad Engine; 2011 DODGE Dakota Crew Cab, 4x4, Bad Trans.; 2011 FORD Ranger, 4x4, Bad Engine; Rust; 2010 FORD F350 Crew Cab, 4x4; 2009 DODGE Crew Cab, 4x4, Needs Repairs; 2007 GMC Canyon Ext. Cab, w/Reading Ut. Cap, 4x4; 2003 CHEV. Silverado 2500HD, w/Plow, Thieman Lift Gate, 4x4; 2003 CHEV. Silverado Ext. Cab, 4x4; 2003 FORD F150 Crew Cab; Vans: (13) 2013 CHEV. Express, (1) AWD, (11) CNG; 2013 DODGE Grand Caravan; 2012 FORD Transit, Bad Trans.; (2) 2010 DODGE Grand Caravan, Bad Trans.; 2009 CHEV. Express, Flex Fuel, AWD; 1995 GMC Vandura 3500; Cars/SUV: 2016 CHEV. Equinox LTZ, AWD; (2) 2013 FORD Escape, 4x4, Bad Engine; 2010 JEEP Rubicon, 4x4; 2009 HONDA Civic GX, CNG; 2009 TOYOTA Corolla S; (2) 2009 FORD Escape, Frame Rot; 2008 CHEV. Aveo LS; 2007 CHEV. HHR LS; 2007 TOYOTA Prius Hatchback Hybrid; 2006 VOLVO XC90, 4x4; 2005 JEEP Grand Cherokee, 4x4; 1998 CHEV. Camaro, V6, Auto, T-Tops; 1998 MERCEDES BENZ CLK320; Misc. Vehicles: 2004 INT’L CE300 School Bus; 2002 STERLING L9500 Tractor; 1998 WINNEBAGO Adventurer 32’ Motorhome; 1991 INT”L Pressure Drill Truck; Trailers: 2006 TRANSCRAFT Flatbed; (2) 2005 ROGERS 50 Ton

For Online Bidding, Visit https://www.proxibid.com

Sale Terms: 10% Buyer’s Fee Payment: Cash, Good Checks, Credit Card & Certified Checks

Detach. 3 Axle Lowbed; 2005 WABASH NATIONAL Box; 2003 TRANSCRAFT 45’ Drop Deck; 2002 HOGG DAVIS Reel; Antique Trailer; Other: 2016 POLARIS Razor 900ES Side by Side; 1995 BOMBARDIER SW48, w/Angle Plow, Auto, Dsl; Sailboat w/Trailer; SKIDOO Snowmobile; (2) Jet Skis; Unused Containers/Storage Shelters: (3) 40' 4 dr. Container, 4 side doors; (2) GOLDEN MOUNT 40’x80’ Dome Container Shelter; GOLDEN MOUNT 40’x40’ Dome Container Shelter; GOLDEN MOUNT 30’x85’x15’ Dome Storage Shelter; (3) GOLDEN MOUNT 30’x65’x15’ Dome Storage Shelter; (6) GOLDEN MOUNT 20’x30’x12’ Dome Storage Shelter; GOLDEN MOUNT 20’x40’ Dome Container Shelter; GOLDEN MOUNT 20’x20’ Dome Container Shelter; 9’ Container, w/door & window; GOLDEN MOUNT 20’x12’ Car Port; Portable Buildings: 19'x20' Port. Office, w/bathroom (Visit Website for More Information); BASTONE 110V Port. Bathroom, w/shower & toilet; (2) BASTONE 110V Port. Toilet, w/two stalls; BASTONE 110V Port. Toilet, w/one stall; Misc.: Unused 4000 PSI Hot Water Pressure Washer; (3) 7’ 18 drawer Work Benches; (2) Unused 7’ 10 drawer Work Benches; 10 Wheel Dump Body, w/strobes & taillights, no piston; Flatbed Body, w/liftgate; (4) Pallets- 2” Bluestone Patio Kits; (2) Pallets- 1.5” Irregular Tumbled Pavers; (2) Pallets- 2” Irregular Tumbled Pavers; (19) Pallets- Gauged Colonial Wallstones; Concrete Blocks; 6’x6’& 2’x8’ Blue Stone Slab; Pallet- Oak Firewood; Pallet- 3/4” Red Decorative Stone; Pallet- 3/4” Blue Decorative Stone; (2) 14’ Driveway Gates w/(20) 8’ Fence Sections; (12) 20’ Wrought Iron Gates; (3) 14’ Wrought Iron Gates; (2) 200# Cast Iron Anvils; 20,000# Elec. Winch; (2) GREENLEE Boxes; Stainless Steel Milk Tank; Pallet- Safety Cones; Straps; Double Hook Chains; Safety Cabinets; Pallets- PVC Pipe; Sub Pumps; Plastic Collars; Pallet- Firehose; Traffic Boxes; (2) Pallets- Light Fixtures; (Unused) Large Assortment of HD motorcycle parts, peg board organized; Complete Shovelhead motor; Shovelhead Motor, parts; HD Frame; HD Fenders; Grease Guns; Lasers; Heater; Saws; (5) 275-330 Gallon Oil Tanks w/Legs; 1000 Gallon Double Wall Diesel Tank, w/Transfer Pump; 500 Gallon Single Wall Diesel Tank w/Transfer Pump;

Inspection: Friday, May 7- 8:00 am to 5:00 pm

Masks are required by all attendees. Temperatures will be taken to enter and bid. We will be following all CDC guidelines for social distancing and hand sanitizing. Online bidding will be available. Please register for online bidding a minimum of 24 hours before sale. AUCTIONEER: REGINALD LUSSIER LYNDONVILLE, VT 05851 NH LICENSE #2413


Page 106 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 107


Page 108 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Industry Urges Fast Action On Infrastructure Investment COSTS from page 52

Five out of 10 AGC member firms doing utility infrastructure or federal and heavy construction and four out of 10 highway contractors saw shortages from February 2020 to February 2021.

Price Check The AGC is closely tracking material prices and supply chain disruptions to analyze potential threats to construction firms. The association reported that a major producer notified customers of a further $50/ton jump in structural steel prices in mid-April. The producer also posted a $100/ton hike for HHS, pipe, mechanical and piling products the next day, according to the April AGC Data Digest. That same day, a supplier of fiberglass equipment stated that crippling shortages of raw materials were forcing major suppliers to declare “force majeure.” “An unprecedented leap in the price of goods and supply-chain disruptions are wreaking hardships on contractors and slowing projects,” noted the association. The AGC lobbied the Biden administration to end tariffs and quotas on imported construction materials to ease the domestic supply chain. “Today’s report documents just some of challenges contractors are experiencing,” said Simonson. Challenges with fast-rising materials costs, lengthening or uncertain delivery times and rationing of key inputs are the issues he cited. “These problems threaten to drive up the cost and completion time for many vital projects and potentially set back the recovery in construction employment.” Simonson noted prices for construction materials and services and contractors’ bids dropped at the pandemic’s start but diverged in the past year. A government measure of the selling price for construction goods jumped 3.5 percent from February to March and 12.9 percent since March 2020. Simonson reported “both the monthly and yearly increases were the highest recorded in the 35-year history of the series.”  CEG

Yanmar Marks Golden Anniversary of Its YFW500D YANMAR from page 30

1996

2000s

1990

1990: The C6R was a 790 mm wide mini carrier specially designed for civil engineering and suitable for urban renewal in densely populated residential neighborhoods and narrow alleys. With the power and sturdy design of a construction machine, it was used for a wide range of tasks from civil engineering work to landscaping and forest road work in narrow areas where small pick-up trucks could not go.

1996: The largest tracked carrier in Yanmar’s history, the C120R is a 240-hp, 11-ton load, large carrier that combines power and speed to meet the expectations of professionals. The C120R emphasizes strength, durability and operability from its basic structure through to every detail of the undercarriage.

2000s: Yanmar launched a series of products equipped with environmentally friendly engines that met the strict emission regulations of Europe, the United States and Japan. Among them, the C30R-3 adopted a two-pump, two-motor hydraulic system, which enabled much smoother running and spin turns than before, and also incorporated the latest technology such as a GPS remote monitoring system.

Visit CEG’s Web Site at www.ConstructionEquipmentGuide.com


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 109

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. APRIL/MAY 2021 CRANE SAFETY COURSES April 26 – April 27, 2021 Aerial Work Platform Operator & Inspector Training, Orlando, FL April 28 – April 29, 2021 Qualified Signal Person Training, Orlando, FL May 3 – May 7, 2021 Qualified Rigger & Signal Person Training, Houston, TX May 4 – May 7, 2021 Overhead Crane Train The Trainer, Cincinnati, OH May 5 – May 6, 2021 Forklift Operator & Inspector Training, Orlando, FL May 11 – May 12, 2021 Overhead Crane Operator Training, Houston, TX May 11 – May 14, 2021 Overhead Crane Inspector Training, Cincinnati, OH May 12 – May 14, 2021 Aerial Work Platform Train The Trainer, Orlando, FL May 17 – May 20, 2021 Overhead Hoist Maintenance Training, Cincinnati, OH May 17 – May 21, 2021 Mobile Crane Train The Trainer, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

ABC Users Summit 2021 Dates: May 12–14, 2021 Location: The Ritz-Carlton, Dallas 2121 McKinney Avenue, Dallas, Texas 75201 Description: For ABC members who want to excel at the highest levels of health care and industrial construction performance, this is a must-attend event. The exclusive ABC Users Summit brings together top construction users and merit shop contractors for interactive discussions about how to collaboratively improve upon the planning and delivery of high-quality construction projects. From automation and technology to contracting strategies, safety performance and the latest economic outlook, this event creates an environment where you can refine your skills and engage in open discussions with your peers. Registration pricing is $650 for contractor members. The deadline to register is Monday, April 19. Plus, registration is complimentary for health care and industrial users and developers. Visit http://userssummit.abc.org// for more information and to register for this event. For questions, email meetings@abc.org. ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) 2021 AED Summit (Virtually AND In-Person) Dates: May 24–May 26, 2021 NEW DATES! Location: The Mirage Hotel, Las Vegas, NV Description: AED is bringing the 2021 Summit to the lively city of Las Vegas, where the sky is the limit! Summit is the industry’s safest interactive and innovative equipment distribution event in North America. The health and safety of our members, employees and partners are AED’s highest priority. We have securely designed three full days of education, featured presentations, meeting spaces and networking opportunities specifically with our dealers in mind. 2020 was a learning curve for us all, but you do not have to figure it all out on your own. Find out where the industry is headed so you can be at the forefront by attending the AED Summit. The AED Summit is your annual opportunity to come together with professionals across the heavy equipment industry spectrum to improve yourself and your team and to build meaningful connections. Attendees can choose how they would like to attend this year; that’s right, you have options! We are offering an in-person or virtual registration to accommodate our members’ needs for the same price. Regardless if you choose to join us in Las Vegas or to view from the comfort of your office Regular registration ends on May 22, 2021. Late registration starts on May 23, 2021. Room blocks for the new dates of 2021 AED Summit are available. Attendees can choose to change their in-person registration to a virtual registration at any time. If you wish to do so, please email help@aednet.org to inform the AED team. For more information and to register for this event, please visit https://aednet.org/events/summit. If you need assistance registering, please call 800-388-0650.

LIFESAVERS 2021 VIRTUAL Lifesavers National Conference on Highway Safety Priorities Dates: April 26-28, 2021 Description: Last year, an estimated 36,096 people died in motor vehicle crashes in the U.S. Lifesavers is recognized as the premiere conference to learn about the latest highway safety research, best practices, and cutting-edge initiatives; and to explore innovative technology and strategies used to combat risky driving behaviors and save lives. The Lifesavers Conference is also historically the world’s largest gathering of leaders and advocates in traffic safety. The 2021 Lifesavers Virtual Conference will provide a global platform with 70 virtual workshops in nine tracks, plenary sessions, peer exchange discussion groups, and an extensive interactive exhibit hall. The learning environment is designed to engage federal, state and local government; law enforcement; public health; injury prevention; advocacy and non-profit organization professional in an exchange of ideas, strategies, and programs to reduce preventable injuries and deaths. Registration is now open. Visit https://lifesaversconference.org/ for more information and to WORLD OF CONCRETE (WOC) register for this event. World of Concrete 2021 Dates: June 8-10, 2021 Education: June 7-10, 2021 NATIONAL ASPHALT PAVEMENT ASSOCIATION (NAPA) Times: 9:30 am - 5:00 pm Beyond the Basics: Milling for Quality Webinar Location: Las Vegas Convention Center Dates: April 29, 2021 Description: World of Concrete is the commercial construction Times: 2:00 - 3:30 PM Eastern Time (US and Canada) industry’s largest annual international event for concrete and Speaker: Tom Chastain, Milling Product Manager, Wirtgen America Inc. masonry professionals and puts these kinds of immersive opportuDescription: Milling is the removal of often distressed asphalt mix- nities at your fingertips—join your community here and experience tures from a pavement structure. While some just see milling as the real, tangible results. Hands down, the best decision you'll make. process of generating reclaimed asphalt pavement (RAP) which can EXHIBITS: Original equipment manufacturers from around the world be used in future projects, milling can also positively or negatively impact the quality of rehabilitation efforts. 1.5 PDH Hour Available. and exclusive U.S. distributors of equipment, tools, products and services for the commercial construction, concrete and masonry The participants will: industries. 1. Learn the different types of cutting drums 2. Understand how different cutting drums impact RAP and the qual- WHO ATTENDS WOC? More than 60,000 industry professionals from all around the world, representing all segments of the construcity of the milled surface 3. Identify milling best practices for ensure the paving crew has the tion industry: Commercial Contractors, Concrete Contractors, best chance of placing and compacting a dense, smooth surface Concrete Pumpers, Construction Managers, Dealers/Distributors, Cost: NAPA Members, Government Officials and Academia - free Decorative Concrete Contractors, Designers and Specifiers, General • Non-Members - $29.00 Contractors, Block/Segmental Unit Producers Masonry Contractors, To register and for more information, please visit Architects, Engineers, Block Producers, Ready Mix Producers, https://www.asphaltpavement.org/programs/napa-webinars. Rental Equipment Centers, Repair Contractors, Residential Contractors, Specialty Concrete Contractors, Precast, Pipe and Block ENGINEERING NEWS-RECORD (ENR) Producers, Precast/Prestressed Producers, and more. Groundbreaking Women In Construction 2021 Virtual Event NEW FOR 2021! Cement Production Pavilion (North Hall): Dates: May 4–6, 2021 Description: ENR’s 2021 Groundbreaking Women in Features the leaders of the equipment and support services used in Construction’(GWIC)—our 18th!—will again be fully virtual, on an cement processing: kilns, separators, mills, dryers, silos, bagging, enhanced platform with even more opportunities to connect to peers automation & instrumentation. Supporting this pavilion is the and industry leaders alike. International Cement Seminar, premier conference for cement indusGWIC is much more than just a conference—it serves as a catalyst that helps women expand their presence, influence and career suc- try professionals, produced by Semco Publishing, parent company cess in an ever shifting industry—and to share, learn, challenge and of Cement Americas, Rock Products and Concrete Products magainspire in their organizations. It also has grown into the leading tal- zines. World of Concrete attendees can purchase the International ent development and networking event for construction industry pro- Cement Seminar Package to join cement industry thought leaders in a focused series of presentations on best practices in cement professionals! Attendees will have access to all of valuable content GWIC is known duction, equipment selection, materials, quality and environment for, with an enhanced attendee experience. A single-login, user- control technologies. friendly platform will enable seeing who is present in the virtual Registration for WOC 2021 is now open. space, the ability to IM and swap business cards with other atten- PLEASE BE ADVISED: There will be no onsite registration this year dees, and easy access to all presentations and handouts. due to new COVID safety protocols. You MUST REGISTER ONLINE Registration is now open. For registration questions please contact ENR Events Registration before coming to the show. Visit www.worldofconcrete.com for more information and registraServices at (844) 644-7449 or enr@executivevents.com. tion. Registration questions? Call Registration at 866.860.1983 or email Registration@WorldofConcrete.com. ASSOCIATED BUILDERS AND CONTRACTORS, INC. (ABC)

Events are subject to change, check websites for updates

Absolute Auction Virtual/Live Broadcast David M. Merchant, Inc. Thurs., June 3, 2021 ± 9:00AM Boonsboro, Maryland (Hagerstown/Frederick Area) Notice: Due to the untimely death of David M. Merchant, a well-respected excavating contractor and member of his community, the heirs of the estate have decided to cease operations of his excavating business and liquidate all assets at public, absolute auction. All items in the auction are owned by David M. Merchant, Inc. and will sell to the highest bidder without minimums or reserves via a virtual, live-broadcast absolute auction. $XFWLRQHHU¶V 1RWH David Merchant has an outstanding reputation for quality workmanship, quality equipment and top-notch maintenance. The majority of this equipment had been purchased new and has been routinely maintained by local dealerships and in-house preventative maintenance programs. Items Include: H\GUDXOLF ([FDYDWRUV DQG $WWDFKPHQWV &UDZOHU /RDGHUV $UWLFXODWHG (QG 'XPS 7UDFWRU Loader Backhoes DQG $WWDFKPHQWV 9LEUDWRU\ &RPSDFWRU 7ri-Axle and Single Axle Dump 7UXFNV 7UXFN Tractors and Lowboy Trailers PLUS: $LU &RPSUHVVRU 5$00$; 7UHQFK &RPSDFWRU 672: &RQFUHWH 6DZ (OHFWULF 0RUWDU 0L[HU Blasting Magazine Boxes 8x16 Trench Box Stone Box Road Plate 8x20 Storage Container (2) Storage Van Trailers Road Signs And Safety Cones ABS, PVC And Galvanized Pipe Contractor Equipment And Shop Tools

Call (800) BID-N-BUY or Email sales@hunyady.com For Complete, Descriptive Brochure! www.Hunyady.com PA Auction License No: AY000281 While LQIRUPDWLRQ LV EHOLHYHG WR EH DFFXUDWH DOO LWHPV ZLOO EH VROG ³$V-Is, Where-,V´ without guarantee or warranty. A physical inspection is suggested.


Page 110 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SON INC PLAN AHEAD CALENDAR ....................................................................103 BUFFALO NY 5/14; DELAWARE OH 5/15..............................................106 CANASTOTA NY 5/16; RACINE WI 5/21................................................107 ALEX PARIS CONTRACTING CO INC ............................................................23 ALL ISLAND EQUIPMENT CORP ......................................................................7 ALLIED CONSTRUCTION PRODUCTS ..........................................................81 ALTA EQUIPMENT COMPANY - NY ..................................................................9 AMERICAN SHORING ......................................................................................18 AMULET........................................................................................................80,85 AUCTIONS INTERNATIONAL INC ................................................................103 BANDIT INDUSTRIES INC ..........................................................................64,65 BARGAINS ......................................................................................................100 BEST LINE EQUIPMENT ..................................................................................10 BOMAG AMERICAS INC ..................................................................................41 CATERPILLAR INC ..........................................................................................43 CEG SCALE MODELS ......................................................................................37 CEG WANTEDS ..............................................................................................101 CHERRY VALLEY TRACTOR SALES ..............................................................36 COLLAR CITY AUCTIONS ................................................................ONLINE 5/7 104 COMPANY WRENCH........................................................................................18 CONSTRUCTION EQUIPMENT GUIDE......................................................58,78 DAVIS AUCTIONS INC PROSPECT CT 5/8/2021 ........................................................................105 DEACON EQUIPMENT CO INC ......................................................................36 DEMAG CRANES..............................................................................................98 DOOSAN PORTABLE POWER ........................................................................49 EAGER BEAVER TRAILERS ............................................................................93 EAGLE POWER & EQUIPMENT CORP ........................................................111 EESSCO ............................................................................................................69 ELLIOTT & FRANTZ INC ............................................................................33,75 EQUIPMENT CORP OF AMERICA ..................................................................32 ESCO CORP ....................................................................................................84 FAE USA INC ....................................................................................................75 FELLING TRAILERS ........................................................................................91 FIVE STAR EQUIPMENT INC ..........................................................................25 FLANGE LOCK..................................................................................................22 FOLEY INC ..........................................................................................................2 G T MID ATLANTIC LLC....................................................................................14 GEHL ................................................................................................................97 GROFF TRACTOR & EQUIPMENT INC ..........................................................28 H O PENN MACHINERY CO INC ....................................................................15 HITACHI CONSTRUCTION MACHINERY ..................................................50,51 HOFFMAN EQUIPMENT INC ..........................................................................21 HULTDINS MANUFACTURING ........................................................................80 HUNYADY AUCTION COMPANY GLENVILLE PA 05/19..............................................................................109 BOONSBORO MD 6/3 ............................................................................109 HYUNDAI CONSTRUCTION EQUIPMENT ................................................38,39 JESCO ................................................................................................................3

JJ SCHECKEL CORP........................................................................................31 JOHN DEERE....................................................................................................53 KLEEMANN ..................................................................................................70,71 KOBELCO CONSTRUCTION MACHINERY ..............................................46,47 KOMATSU AMERICA CORP ............................................................................45 KPI-JCI ..............................................................................................................77 KUBOTA EXCAVATOR ......................................................................................99 LABOUNTY MANUFACTURING INC................................................................86 M G EQUIPMENT..............................................................................................36 MAGELLAN CONSTRUCTION ........................................................................42 MANITOWOC CRANE GROUP ........................................................................48 MESSICK’S........................................................................................................33 METSO OUTOTEC............................................................................................61 MIAMI MACHINERY ..........................................................................................29 MILTON CAT......................................................................................................28 MONROE TRACTOR & IMPLEMENT CO INC ................................................68 MONTABERT - FLINT ......................................................................................35 MUNICIBID.COM ............................................................................................103 NATIONAL ATTACHMENTS ..............................................................................85 NEW MILLENNIUM RENTALS..........................................................................41 NEWARK EQUIPMENT SALES CORP ............................................................14 NORAM..............................................................................................................55 NORRIS SALES CO INC ....................................................................................6 PETERSON PACIFIC CORP ............................................................................76 PLASTERER EQUIPMENT CO INC ..................................................................5 POWERSCREEN MID-ATLANTIC ....................................................................67 POWERSCREEN NEW ENGLAND ..................................................................60 R J POIRIER HEAVY EQUIPMENT REP ........................................................35 RANSOME ATTACHMENTS ............................................................................82 RITCHIE BROS. AUCTIONEERS UNRESERVED PUBLIC AUCTIONS ......................................................112 ROBERT H FINKE & SONS INC ................................................................19,68 ROCK & RECYCLING EQUIPMENT LLC ........................................................73 SCHAEFER ENTERPRISES ............................................................................82 SENNEBOGEN..................................................................................................72 SILVI CONCRETE ............................................................................................33 SMH GROUP-US ..............................................................................................35 SMITHCO ..........................................................................................................95 STEPHENSON EQUIPMENT INC ....................................................................11 SUMMIT SUPPLY LLC ......................................................................................14 TERAN INDUSTRIES INC ................................................................................83 TEREX FUCHS..................................................................................................63 TOWMASTER INC. ......................................................................................88,89 TRACEY ROAD EQUIPMENT INC ..................................................................13 TRANSPORT EQUIPMENT SALES..................................................................27 TRI-STATE TRAILER SALES ............................................................................90 VOLVO CONSTRUCTION EQUIPMENT-NA ..............................................56,57 WESTCHESTER TRACTOR INC......................................................................10 WHITNEY & SON INC ......................................................................................74 WOODS CRW CORP........................................................................................17

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.


CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • April 28, 2021 • Page 111

w w w. e a g l e p o w e r a n d e q u i p m e n t . c o m

Introducing the New Case CX D Series Excavator

RECENT TRADES

2015 Kubota SVL75-2HWC, Stk# 36715, 1625 Hrs ...................... ...........................................................................Sale Price $42,500

2015 Case 580SN Loader Backhoe, Stk# 36509, 1501 Hrs ...... ...........................................................................Sale Price $71,250

2016 Case 580SN Loader Backhoe, Stk# 42499, 4653 hours, 4WD, HVAC Cab, Extendahoe ..........................Sale Price $39,500

2016 Case 621F XR, Stk# 37045, 875 Hrs ...................................... ........................................................................Sale Price $129,500

2015 Takeuchi TL12R Compact Track Loader, Stk# 35996, 897 Hours ..........................................................Sale Price $44,500

2018 Case 521G Wheel Loader, Stk# 42564, 718 hours, Heated Cab, 2.3 Yard Pin On Bucket ............................Sale Price $97,500

Authorized Dealer for These Quality Lines: Toro Dingos, Trenchers, Horizontal Directional Drills • Eager Beaver & CAM Trailers • Rammer by Allied Hydraulic Hammers & Shakers • Ring-O-Matic Vacuum Excavation • Airman Portable Air Compressors • Paladin Attachments Planers, Brooms, Buckets • Trailking Trailers

Frank Beck

Pat DiCicco

Dean J. Leonetti

Mike Lutz

Tom Scott

Rich Verna

Jim Lutz

Brandon Jewell

Key Account Manager Montgomery County, PA

Key Account Manager, Philadelphia County, PA & Eastern Bucks County, PA

Philadelphia County, PA and Eastern Bucks County, PA

Montgomery County, PA and Western Bucks County, PA

New Castle County, DE, Cecil County, MD and Southern Chester County, PA

Chester County, PA and Delaware County, PA

Sales Manager

Toro Dingo Specialist

610/312-3995

215/870-4546

215/680-9203

215/783-1847

610/703-4261

302/530-9134

610/420-4770

215/699-5871 215/870-8567

953 Bethlehem Pk (Route 309) Montgomeryville, PA 18936 215/699-5871 Fax 215/699-6416 NEW HOURS Mon.-Fri. 7AM-5:30PM

2211 Dupont Highway New Castle, DE 19720 302/652-3028 Fax 302/652-7540 NEW HOURS Mon.-Fri. 7AM-5PM

1416 Phoenixville Pike, Suite 200 West Chester, PA 19380 610/458-7054 Fax 610/458-7094 NEW HOURS Mon.-Fri. 7:30AM-4PM


Page 112 • April 28, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unreserved public equipment auctions

Equipment financing by equipment experts.

2 – 2019 Kenworth T880 | Orlando

2 – 2016 Caterpillar 279D | Orlando

2 of 3 – 2016 Caterpillar 308E2 CR | Orlando

Terex T780 80 Ton 8x4x4 | Tipton

2020 Caterpillar 330 | Rocky Mountain Regional Event

2018 Caterpillar 938M | Rocky Mountain Regional Event

2018 Caterpillar 315FL CR | Rocky Mountain Regional Event

2017 John Deere 772G | Fort Worth

Grove RT9150 150 Ton | Fort Worth

43,295+ items in 130+ auctions including Fort Worth, TX May 18–19 Tipton, CA May 19 Orlando, FL May 20 Rocky Mountain Regional Event May 26–27 Phoenix, AZ Jun 4 Sacramento, CA Jun 9 Las Vegas, NV Jun 11

Great Plains Regional Event Northeast Regional Event Great Lakes Regional Event Los Angeles, CA Southeast Regional Event Chehalis, WA

IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only. For the most up-to-date information visit rbauction.com/covid-19

Jun 17 Jun 22–23 Jun 24–25 Jun 25 Jun 29 Jun 29

Online bidding information

Financing & leasing available

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com

Auctioneer Chad M. Johnson # 17668, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889, Auction Company Bond #0470724, Auctioneer Patrick J. Hicks Bond # 0470727, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, Auctioneer Chad M. Johnson # 17668, Motor Vehicle Dealer License #DLR25867, Auction Firm License # 444.000193, Auctioneer Greg M. Highsmith # 441.000865, Auctioneer James L. Valentine #5623, Auctioneer Kevin L. Perry # 2763, Auction Company License #AY00208L, Auction Firm # 2008000166, Auctioneer Kevin L. Perry # 2002000227, Auction Company Bond #0470724, Auctioneer Trevor J. Moravec Bond # 0466225, Auction Company License # 001348, Auctioneer Frederick R. Vilsmeier # AUNR003087, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Used Motor Vehicle Dealer License #2647


Turn static files into dynamic content formats.

Create a flipbook