Midwest 25, December 11, 2021 by Construction Equipment Guide

Published Nationally

$3.00

Midwest Edition

December 11 2021 Vol. XXVII • No. 2 5

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Cater pillar Hosts E vent to Showcase Cold Planers...8

Doosan Unveils DD100 Dozer, Much More for 2022...14

INDOT photo

The Indiana Department of Transportation (INDOT) is building a new interchange on Interstate 65 at Boone County Road 550 South and redesigning the I-65 and State Road 267 interchange at Whitestown Exit 133. “The purpose of the project is to improve traffic operations along the I65 corridor, from I-865 to S.R. 267 near Whitestown and to provide improved connectivity between I-65 and the rapidly developing area By Lori Lovely

CEG CORRESPONDENT

Kirby-Smith Machiner y’s David Mehr tens Passes Away...34

Table of Contents ................4

along the C.R. 550 S corridor,” explained Debbie Calder, communications director of INDOT’s Crawfordsville district. Planned Growth Last year, Whitestown was ranked Indiana’s fastest-growing community for the eighth consecutive year. Its population increased from 3,132 to 8,627 between 2010 and 2018, when talks about this project began. Over see INDOT page 64

Aggregate & Recycling Section..........................35-48

Industry Ready to Dive Into Infrastructure Work

Attachments & Parts Section ......................................53-58

As Agencies Assess Priorities, Contractors Prepare for Influx of Infrastructure Projects5

Truck & Trailer Section ........ ......................................65-71

By Lucy Perry

Snow & Ice Section ....79-85

The ink is still drying on the Infrastructure Investment and Jobs Act (IIJA) as the construction industry awaits bid-letting and Congress turns to the reconciliation budget bill. After a long, hard-fought battle for funding, the industry is ready to get to work on these broad-spectrum infrastructure projects,

Auction Section ..........90-97 Business Calendar ............96 Advertisers Index ..............98

CEG CORRESPONDENT

which will color the national construction picture for years to come. “America finally has a generation-defining infrastructure bill — and if the reconciliation budget comes through, too, America will begin a building spree larger than what happened during the New Deal,” observed Brookings Institution. It’s “worth pausing to consider” the enormisee INFRASTRUCTURE page 22

Page 2 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2006 Cat 963C / $117,000

2003 Cat D6NLGP / $69,500

2002 Cat 953C / $65,000

SN: BBD02837 Hours: 6,419

SN: ALY00278 Hours: 11,951

SN: 2ZN04949 Hours: 11,047

2018 ASV RT75HD / $47,000

2020 Case TR310B / $52,000

2018 Cat 950M / $188,000

SN: JDH01541 Hours: 1,741

SN: NLM487218 Hours: 173

SN: J1S00641 Hours: 5,818

2016 Cat 12M3 / $160,000

2014 Cat 120M2AWD / $160,000

2013 Cat 336EL4 / $145,000

SN: N9F00442 Hours: 6,522

SN: R9W00122 Hours: 7,626

SN: BZY01490 Hours: 6,791

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 3

81 15-94 15 94 41-19 41 19 900 2021 Bergmann n C912S Rotating Dump Box Track Truck ck .................. $265,000

2014 Kawasaki 90Z7 W W.. Loader Lo oader . $139,500

2017 IHI Mini ni IC35 Track Trucks .. $34,500

2018 Broce RCT350 Sweeper .. $42,500

A/C, 295HP Tier 4, JRB hydraulicc coupler, F-R direct switch, 26.5R25 Michelin tires, wo ork mode switch, 2 OHYHU UG YDOYH FROG VWDUUWW IDQ UHYHUVH H[WUD FRXQWHUweight, heated TL LV V air suspension seat, backup camera, a, 56,800 lbs., 4,821 hrs. ................................. #11467

Kubota V2403M M-D1 46HP diesel, 2 speed hydrostat transmission, 6,614 614 lbs. capacity (1.8 cubic yds.), 12’ 6” tracks, 8.7 7 PSI loaded, 5,016 lbs., 810 hrs. ........................................................................ ............................................... #N4745

A/C and heat, 8’ brush, 150 gallon water er spray system, joystick broom controls, brackets ets & steering YDOYH IRU WRZ EDU +\G¶V DQG EUDFNHWV IRU VFUDSHU blade, road lights, beacon, mirrors. Scraper raper blade and tow bar are additional, 1,344 hrs. .......... #N5512

2013 Cat M322D Wheeled Excav E . . $129,500

2012 Cat M3 322D Wheeled ....... $129,500

2016 JLG 800S Manlift Aerial Lift . $84,500

2016 JLG 800S Aerial A Lift ......... $79,500

A/C, wheeled, 173HP diesel, VA boo om, 8’ 2” stick, 20’ 7” dig depth, auxiliary hydraulics, multi-function -function hydraulics, RXWULJJHUV DQWL GULIW YDOYHV DGMXVW K\GUDXOLF VHQVLWLYLW\ roading pkg., twist-a-wrist, Wain Royy quick coupler, Wain Roy XLS 36” ditching bucket, pattern n changer, auto lube, 47,400 lbs., 3,839 hrs. ........................................... #11028

A/C, wheeled, Cat 6.6 173HP diesel, standard boom, 9’ 6” stick, 20’ 7”” dig depth, 11.00-20EM tires, auxiliary K\GUDXOLFV RXWULJJHUV DQWL GULIW YDOYHV DGMXVW K\GUDXOLF VHQVLWLYLW\ URDGLQJ SNJ &DW YDULDEOH SLQ JUDE hyd. coupler 78”” ditching bucket, pattern changer, window guard, 47,4 400 lbs.., 3,921 hrs. ............... #11241

Deutz TD2.9L 65HP Tier 4F diesel, 80’ p platform height, 4WD, 2 wheel steer, Skypower, 8’ basket, et, 15 x 6.25 IRDP ¿OOHG WLUHV FROG ZHDWKHU VWDUW LQZDUG VHOI FORVLQJ gate, 45% gradability, 33,450 lbs., 727 hrs. ... #ST208

Deutz TD2.9L 65HP Tier 4F diesel, 80’ platform height, 4WD, ZKHHO VWHHU 6N\SRZHU ¶ EDVNHW [ IRDP ¿OOHG WLUHV cold weather start, inward d self-closing gate, 45% gradability, .................................. #ST210 33,450 lbs., 1,131 hrs. ...................................

Cummins QSB6.7 T5F F 241.38 hp diesel, rotating dump box, 11.02 ton capacityy (8.5 yds.), 2 speed hydrostatic transmission, 29.5” wide de tracks, steering wheel, rotating RSHUDWRU VWDWLRQ ;/ OLJKW SDFNDJH UHDU YLHZ FDPHUD automatic greaser, 32,738 ,738 lbs. , 8 hrs. .......... #BER003

3 Availlable!

2020 Kenworth T--880 w/ Fassi Crane . $184,500

2019 KW T800 800 Crane Truck .... $150,000

2009 Ta adano GR300XL-1 Crane e . $135,500

2012 CAT 420F IT T Backhoe ....... $77,500

FET PA AID. Fassi F275A-2-23 Knuckle e Boom Crane 17,637 lbs capacity, 46’ maximum reach high h, 33’ maximum reach horizontal, Remote control, 4 outrigge ers, 450HP T4f diesel, Eaton Fuller 10 speed, 20,000 lbs. front f axle, 44,000 lbs. rear axles, 64,000 lbs. GVRW, 300” WB, W 4.63 rear ends, dual steering boxes, A/C, cruise control, ntrol, heated mirrors, power mirrors, power locks, air ride se eat, air ride cab, power 002 mi. ... #N6823 windows, block heater, oil heater., 1,0

3 Available! v New w/Unused. Te erex BT2047 Crane 20,000 lbs capacity, 47’ maximum reach, Greer Insight load system, 4 outrigg gers, Eaton Fuller 10 speed, dual steerLQJ ER[HV GLႇ ORFN $ & FUXLVH FRQWURO KHDWHG PLUURUV power mirrors, power locks, air ride seat, air ride cab, power windows, block heater, oil heater, 947 mi. ....................................................................... #N6835

A30 ton capacity, cab with A/C, Cummins ins QSB6.7 215HP diesel, 101’ 4 section boom, 42’’ jib, stabilizers, 20.5-25 tires, Ta adano electric load ad moment indicator system (AML-L), 4 WD/steer, dual winch, 2,310 hrs. ................................................... ........ #10123

A/C, Cat C4.4DIT 100HP HP T4i diesel, 4WD, power shift transmission, extenda hoe, 17’ 9” dig depth, 4-N-1 front IT bucket, rear aux hydraulics, raulics, front hydraulic coupler, IURQW DX[ K\GUDXOLFV ÀLS RYHU VWDELOL]HUV UHDU PDQXDO coupler, 24” rear bucket, t, 12.5/80-18 front tires, 19.5-24 rear tires, pilot control, ride control, pattern changer, cold weather package, blockk heater, 18,000 lbs. , 1,606 hrs. ................................................................... ................................ #KOB234A

sales@iltruck co sales@iltruck.co om • rental@iltruck k com • 320 Briscoe Drive, k.com Drive Morris Illino ois 60450

www.iltruck.com .iltruck com

Page 4 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE 18

CATERPILLAR HOSTS EVENT TO SHOWCASE ITS COLD PLANER MODELS

For dealers and contractors throughout the United States at the event, Caterpillar discussed its PM312, PM622 and PM825 cold planer models and provided several demonstrations of the PM825.

DOOSAN UNVEILS NEW DD100 DOZER, MUCH MORE FOR 2022

Doosan Infracore North America introduced its new products for 2022 during a media event at its Real Operations Center (ROC) in Arizona the first week of December.

LEEBOY SIGNS ALTA EQUIPMENT AS DEALER IN MICHIGAN

LeeBoy has signed AltaAlta Equipment has a strong reputation in Michigan as a paving and construction equipment dealership. Equipment Company as its new dealer in the Lower Peninsula of Michigan.

NEW HOLLAND PRESENTS PRESIDENT’S CLUB AWARD TO ALTA EQUIPMENT

Alta Equipment Company has earned New Holland’s President’s Club Award for service and product support excellence at its Orland Park and South Elgin, Ill., facilities.

SOUTHEASTERN EQUIPMENT’S BAKER, RECEIVES MUSKINGUM AWARD

Muskingum University in New Concord, Ohio, recently celebrated outstanding alumni by awarding three past graduates. Among the honorees was Cambridge native and Southeastern Equipment founder, Bill Baker.

ALTORFER RENTS, SULLAIR CONTINUE PARTNERSHIP AMID EXPANSION

Sullair, a manufacturer of compressed air solutions since 1965, is expanding its partnership with Altorfer Rents in supplying portable air compressors to the construction, agriculture, landscaping, mining and other markets.

KIRBY-SMITH MACHINERY’S DAVID MEHRTENS PASSES AWAY

David A. Mehrtens, 61, of Lenexa, Kan., passed away Dec. 3, 2021. He worked in the construction equipment industry for more than 40 years, most recently serving Kirby-Smith Machinery as director of remarketing and used equipment. Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Petrik Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

FECON ADDS ZELLER AS MIDWESTERN REGIONAL SALES MANAGER

Fecon announced the addition of Dallas Zeller as a regional sales manager of the Midwest region. In his new role, Zeller will assist distributors and other sales channel partners.

CEMEN TECH EXPANDS PRODUCTION, ADDS STAFFING TO MEET DEMAND

Iowa-based manufacturing company Cemen Tech is growing its production capabilities to meet the future. Cemen Tech has incorporated a second production shift and is increasing its staffing levels by more than 25 percent.

DRIVERS CALL TRANSPORTING TREE ‘EXPERIENCE OF A LIFETIME’

AGGREGATE PRODUCTION & RECYCLING SECTION

35 40 40 42

SCRAP METAL BUSINESS RELIES ON ATLAS MATERIAL HANDLERS

TOMRA PIONEERS USE OF DEEP LEARNING TECH IN WOOD RECYCLING LAKE ERIE PORTABLE SCREENERS DEBUTS PB127 STATIC GRIZZLY

BRAMCO-MPS ANNOUNCES PROMOTION OF MARK STRADER TO VICE PRESIDENT

For six drivers, the opportunity to transport the 2021 U.S. Capitol Christmas Tree from the Mad River Ranger District of the Six Rivers National Forest in California to Washington, D.C., was an experience of a lifetime.

BRANDEIS MACHINERY PROMOTES CHIP YOUNG TO VICE PRESIDENT

Takeuchi-US employees, including President Jeff Stewart, presented the Banks Jackson Food Bank in Commerce, Ga., with food for 200 Thanksgiving dinners and an extra $2,550 to buy additional turkeys to feed more needy families.

90 96

COMING AUCTIONS BUSINESS CALENDAR

53 54 57 58 82 84 94

DANUSER Hornet Post Driver KOMATSU Hydraulic Breakers TIGERCAT 822E Series Feller Bunchers and Harvesters SEPPI M Combined Tiller BOBCAT Ultra-Durable, Redesigned Snowblower Attachment BUYERS Municipal Flex Plow HITACHI ZX210LC-6 Utility Excavator

FAMILY FUN DAY, FOOD DRIVE RAISE $4K FOR LOCAL FOOD BANK DOT OFFICIALS DISCUSS DIFFERENT ICE MELTING TECHNIQUES

KOMATSU ADDS DRONE, SMART FIELD TO JOB SITE SOLUTIONS

With the addition of Smart Construction Field and Smart Construction Drone to Komatsu’s suite of job site technologies, contractors have two new tools to better manage projects.

DEPARTMENTS EQUIPMENT

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

MIDWEST EDITION

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 5

Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers WE ARE HIRING!

2011 WIRTGEN W60

$CALL

2014 WIRTGEN W220

$349,500

2015 KOMATSU 931.1

$275,000

2016 KOMATSU D61PX-24

2016 KOMATSU 931.2

$CALL

2020 KOMATSU WA270-8

$154,500

2016 KOMATSU D65PX-18

$179,500

2014 KOMATSU PC360LC-10 $199,500

2011 WIRTGEN W220

$249,500

2017 KOMATSU PC390LC-11

$274,500

2016 KOMATSU D65PXI-18

$199,500

2017 KOMATSU D65PX-18

$199,500

2017 KOMATSU D65PX-18

$219,500

2016 KOMATSU WA500-7

$229,500

2016 KOMATSU PC45MR-5

$64,500

STK# WG12014, 989 HRS, BOLINGBROOK, IL

STK# VT2021024, 5100 HOURS, ESCANABA, MI

STK# WG19030, 5,532 HRS, SPRINGFIELD, IL

2015 KOMATSU PC490LC-10 $125,000 STK# KM85058, 7,897 HRS, EAST PEORIA, IL

STK# WG20047, 3851 HRS, SPRINGFIELD, IL

STK# KM2021354, 250 HRS, SPRINGFIELD, IL

STK# KM19044, 2843 HOURS, BOLINGBROOK, IL

STK# KM19457, 4037 HOURS, PALMYRA, MO

STK# VT19025, 7,957 HRS, ESCANABA, MI

STK# KM18437, 3484 HRS, SPRINGFIELD, IL

STK# KM19702, 4442 HOURS, SPRINGFIELD, IL

STK# KM19654, 8,339 HRS, EAST PEORIA, IL

STK# KM19566, 3893 HRS, SPRINGFIELD, IL

STK# KM20132, 3786 HRS, COLUMBIA, MO

STK# KM21046, 838 HOURS, BRIDGETON, MO

17 Roland Branch Locations in IL, IN, MI, MO, and WI

Used Sales (217) 789-7711

$189,500

STK# KM19412, 4,882 HRS, DEFOREST, WI

V I S I T

R O L A N D M A C H I N E R Y . C O M

Page 6 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mike Garrard • (630) 492-9115 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 2017 Case 580SN, s/n NHC742675, 2955 Hours, Deluxe Cab w/ AC, 4WD, Comfort Steer, 2-Lever Controls w/Power Lift, Air Seat, Ride Control, 82” QA 4-n-1 Bucket. Extendahoe w/ single direction Aux & Hyd Coupler. 12”, 18”, & 24” buckets ....$69,000

2018 Case TV380, 2069 Hours, with 84" bucket (735064016), Tier 4 Final, E-H Controls, 2 Speed, Enclosed Cab with HVAC, Air Ride Suspension seat, 17.7" Tracks, Hyd Coupler ............................................$44,900

Crestwood 708-597-3110 2018 Takeuchi TB235, s/n 123600647, 556 2015 Case SV212, 665 Hours, Like new Hours, Cab w/AC, Tag Coupler, Blade, Aux Rubber, Traction Assist (ASC), Cummins Hyds, Rubber Tracks........................$41,800 QSB 4.5 Tier 3 Engine......................$63,900

McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana Merrillville 219-576-7800

2018 Case 750M, Cab/Air, Pat Blade ............ ......................................................$118,500

2018 Carlson CP130, s/n 109DB8P, 520 Hours, Contractor deluxe package $179,900

2018 Carlson CP100 Paver, 1938 Hours, Contractor Deluxe Package, Citrus Washdown Tank, Deluxe Washdown Tank, 12 Volt Aux Port, Auger/Conveyor Reverse Opt, Hydraulic Lines for Truck Hitch, Heated Endgate Kit, High Output Light Package........ ........................................................$89,900

Mishawaka* 574-406-6800 Schereville* 219-865-6545 2018 Takeuchi TB240, s/n 124003935, 320 Hours, ROPS, Tag Coupler, Blade, Aux Hyds, Rubber Tracks ..................................$45,500

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

5920 North Lindbergh Blvd. Hazelwood, MO 63042 314-895-9500 www.patkelly.com

Michigan Marne* 616-371-7250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 7

ROADTEC RX900 - ‘18, approx. 1050 hours, ROADTEC RP190 - ‘13, approx.. 6200 hrs. 12’6” drum, 24V night light package, ACE EZIV Carlson screed, Moba grade & slope conG&S, ext warranty ..............................$710,500 trols ......................................................$58,900

SAKAI SW770HF - ‘17 w/approx. 1550 hours, 67” drum, tier III Isuzu engine, fleet machine .. ..........................................................$69,450

PAVERS / ROAD WIDENERS Bomag CR662RM - ‘15 w/590 hrs, tracked MTV w/conveyor, #C000763 ......................$435,900 Roadtec RP190 – ’13, 5860 hrs, Carlson EZIV 10-19’ screed w/12” ext, #C001909 ....$55,000 P.O.R. items may be on rent causing pricing and hours to vary.

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

GROVE RT880E – (’15), 29.5x25 tires, 3,932 hrs, C001718...$429,000

GROVE RT880E – (’14), EROPS, 4,018 hrs, C000895...$389,000

2019 GROVE GRT655L – (’19), 486 hrs, C003873…$CALL

MANITOWOC 11000-1 – (’19), NEW, 20 hrs, C003846...$CALL

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT

EXCAVATORS Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R.

CRUSHING AND SCREENING

JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL

CRANES GROVE RT650E, (’14) 50-Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$319,000 GROVE RT765E-2, (’14), 65-Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$339,000 GROVE TMS900E, (’05), 90-Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ..........................................$CALL

BROOMS

ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ Superior DT74J - ’20, approx.. 600 hrs. AC, side shift, #C002327 ............................$63,700 ..........................................................$161,700 Pioneer FT4250CC – ’17, approx.. 2700 hrs, 18’ feeder, dust sp, 4 bar....................$486,000 MILLING MACHINES BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Pioneer FT4250CC - ’15, approx. 2400 hrs., 18’ Out Conveyor......................................$174,000 feeder, dust sup, 3 bar........................$475,000 BOMAG BM1200/35 - ‘15, 1150 Hrs, 4’ Drum, ROLLERS 3’ Also Available, Front Conveyor, #C000846 .... ..........................................................$298,000 Sakai GW750-2 - ‘14, 1060 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$80,000 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900 Roadtec RX-700 - ‘12 w/5000 Hrs., 7’2” drum, *Comes with any remaining standard and grade & slope controls, #C001978 ....$197,200 3 year extended power train warranty.

Contact Chuck or Jason in Illinois

1-800-307-0221

crhodes@finkbiner.com jzeibert@finkbiner.com

www.finkbiner.com

LOADERS AND EXCAVATORS: LIEBHERR L556 2PLUS2, (‘11) Enclosed ROPS w/AC, 4WD, 188hp Liebherr D934S A6 four cyl. diesel, rear camera, 4.58 cu. yd. bucket with bolt-on cutting edge, “2 plus 2” wheel loader, #15360 ....................$114,438 LIEBHERR LH60C LITRONIC, (‘17) 4,707 Hours, Equipped w/ Liebherr ERC System, A/C, 1114,600-136,700 lb. operating weight, 190kW/258hp engine output, Emission stage Tier 4, #C003171....................................$CALL LIEBHERR LR636, (‘18) 3.25cyd bucket w/teeth & segments. Front and rear aux. hydraulics for 4 in 1 bucket, winch or ripper. 3 year/6000 hour full machine warranty, #C001745 ....................................................$249,700 LIEBHERR LH60M, (‘19) 868 Hours, Auto lube, Tier 4 Final, #C004008 ..............................................$795,000 LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R936 LC, (’19), EROPS w/ AC & Heat, auto lube, rear camera, 54” bucket, #C004148 ..........$CALL SAKAI SW354, (’18), #C003395 ................................................................................................................$CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Matthew Pehler at:

mpehler@amstate.com or mobile 1-414-719-8700 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Travis’s larger-than-life personality, sense of humor and incredible spirit for life engaged the audience from the moment he took center stage.

Attendees look over and learn about the Cat PM825.

Caterpillar Hosts Event to Showcase Its Cold Planer Models

aterpillar held an event Dec. 1, 2021, in Clayton, N.C., to showcase its lineup of cold planers.

Before the equipment walk-arounds and demonstrations began, however, retired United States Army Staff Sergeant Travis Mills of the 82nd Airborne delivered a keynote address to all attendees. Mills’s larger-than-life personality, sense of humor and incredible spirit for life engaged the attendees from the moment he took center stage. Mills is a recalibrated warrior, motivational speaker, actor, author and an advocate for veterans and amputees. Mills’s New York Times bestselling memoir, “Tough as They Come,” is currently available on sale in bookstores everywhere. Despite losing portions of both arms and legs from an IED while on active duty in Afghanistan, Mills continues to overcome life’s challenges, breaking physical barriers and

defying odds. Mills lives by his motto: “Never give up. Never quit.” After his address, the equipment then took center stage. Five years ago, Cat brought a fresh roster of cold planers to the market and has been continuously working on improvements to the product line ever since. The 2021 product release marks the third update to these models since they were first introduced. For dealers and contractors throughout the United States at the event, Caterpillar discussed its PM312, PM622 and PM825 cold planer models and provided several demonstrations of the PM825. The PM312 is an efficient, highly maneuverable milling machine with a cutting width of 48.2 in. (1,225 mm) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass. The PM622 is a high-production, half-lane milling

Sitech Precision was on hand to answer machine guidance questions. (L-R) are P.J. Provenzano, Bob Hendrick, Josh Crank, Todd Pollock and John Stalato.

machine with a cutting width of 88 in. (2,235 mm) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass. The PM825 is a high-production, half-lane milling machine with a cutting width of 98.6 in. (2,505 mm) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass. The models meet U.S. EPA Tier IV Final, EU Stage V and Korea Tier 4 Final emissions standards and are optimized to reduce fuel burn with a high-capacity cooling system that keeps the engine at ideal temperatures for optimal fuel efficiency and lower emissions. New expanded LED lighting enhances nighttime and low-light operation. The new wide-dispersion LED work lights come standard and provide an improved, well-lit work area for ground crew. LED perimeter lights also can be added to further illuminate the rotor chamber, cutting path and work areas around the machine for increased visibility. According to Cat, the integrated Cat GRADE with Grade and Slope system takes the guesswork out of producing accurate and repeatable cutting results and includes automated features like obstacle jump and programmable cut transitions to aid in milling precision. Cat cold planers also can be enhanced with full 3D milling operation. The cutting system is designed to withstand tough applications and is built to last with heavy steel construction and reinforced alloys to resist abrasion, according to Cat. Available in a wide variety of spacings, the durable Cat System K rotors deliver high-performance with efficient material flow and an excellent cutting pattern. Kicker paddles are reversible for extended life, and the tapered dual retention toolholder design eliminates the need for retaining bolts, pins, or setscrews, reducing replacement time by up to 50. A reliable track undercarriage system with well-engineered track geometry provides high tractive effort and better load distribution when milling deep cuts or through hard materials. High-capacity conveyors provide efficient removal of milled material with outstanding discharge consee CAT page 52

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 9

NORTH DAKOTA TA Williston 701.577.1249 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 NORTH CAROLINA Asheville 828.687.0620 Charlotte Contact your local de ealer: 704.596.8283

Dealer Name

Greenville Cityy,, S ST 252.754.5280

123.456.7890 Raleigh 919.661.8710 Cityy,, S ST 123.456.7890 SOUTH CAROLINA City, S City ST Piedmont 864.704.1060 123.456.7890 Columbia Cityy,, S ST 803.791.0740

123.456.7890

Charleston Cityy,, S ST 843.414.1120

123.456.7890

GEORGIA

Cityy,, S ST

Buford 123.456.7890 678.318.9500

Cityy,, S ST Savannah 123.456.7890 912.964.8079 Macon Cityy,, S ST 478.200.3300 123.456.7890

VOL O VO DDELIVEERS Perrfect P f t harmony h ny betw b t een ope erator and ex xcavator

Cityy,, S ST 123.456.7890

Dig more, make more when n you have a Volvo excavvator. These machines balanc ce power and performance performan nce with fuel efficiency and comfort, making work m more cost effective and saving time and moneyy. See how a Volvo excava ator can deliver more reliability – on the job and d to your bottom line.

DEALER LOGO ascendummachinery.com ascendummachinery.c . om .c

Page 10 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113

GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449

www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 11

CALL INDUSTRIAL SALES 866-372-7368

JD 844K, Ride, GP JD 410L, Air, 4x4, Ext Bucket, #124835................ Hoe, Aux Hyd, #121478 .... ............................$289,000 ..............................$79,000

JD 650K, LT, 18” Pads, Bomag BW213PDB-40, 105” PAT, Ripper, #124642 Padfoot, Blade, #118547 .... ............................$109,000 ..............................$89,500

JD 744K, Joystick, Ride, JD 300GLC, 10’ 2” Arm, JD 260E, Tailgate, Dual Diff Locks, #124679 .. Warranty, #123091 ............ Aux Hyd, Warranty, ............................$248,000 #123324..............$209,000 ............................$198,000

JD 550K, LGP, 24” Pads, JD 772G, 14’ Blade, Scarifier, #121924.............. 115” PAT Blade, #120474.. ............................$175,000 ............................$118,000

JD 135G, 9’ 11” Arm, 24” Pads, #123593 ..$119,000

JD 210GLC, 9’ 6” Arm, 32” Pads, Aux Hyd, #124927 .. ............................$149,000

JD 160GLC, Coupler, Aux Hyd, #124832 ....$159,000

Bomag BW177D-5, 66” JD 644K, Rollout Bucket, Scale, #123868 ..$149,500 Smooth Drum, #115558 .... ..............................$56,000

JD 310SL, Air, 4x4, Ext Hoe, Aux Hyd, #118876 .... ..............................$74,000

Harlo HP6500, 4x4, 6500lb., #120388..$59,500

NPK Hammers, All Sizes for All Makes. Inspected JD 672G, Low Cab, Air, 14’ Blade, #102755............ and Well Maintained, GH4 ............................$129,000 –GH18

Cat 963C, Air, GP Bucket, #111395 ................$62,000

Liddell Trailers All Sizes

Page 12 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 13

#92948, 2017 BOMAG BW138AC-5, 1200 HOURS ....................................................$39,500

#93105, 2017 BOBCAT E85, HYD THUMB, 1575 HOURS ..........................................$84,500

#83217, 2015 KOMATSU PC228USLC-10, 2850 HOURS ........................................$159,500

#2021001DM, 2015 KOMATSU D39PX-23, 2400 HOURS............................................$85,000

#92881, 2013 KOMATSU PC390LC-10, 7900 HOURS ........................................$119,500

#92729, 2012 KOMATSU WA380-7, JRB QC. 4000 HOURS..........................................$127,000

#83398, 2014 KOMATSU PC210LC-10, QC, 4200 HOURS ..................................................$104,500

#82380, 2009 KOMATSU PC220 LONG FRONT, 5,950 HOURS ........................................$129,500

#92930, 2011 KOMATSU D51PX-22, 6 WAY BLADE, 3200 HOURS ..........................$127,500

#52030, 2016 KOMATSU PC490LC-11, AUX HYD, #92926, 2013 KOMATSU PC490LC-10, 8750 JRB QC, 5700 HOURS ..........................$192,000 HOURS, AUX HYD, QC ..........................$109,000

#93009, 2015 KOMATSU PC240LC-10, 7,750 HOURS, QC ............................................$79,500

#80768, PC300LC-7 LONG FRONT, 7400 HOURS ................................................................$99,000

#92180, 2012 KOMATSU D65EX-17, RIPPER, SIGMA BLADE, 4700 HOURS ................$149,500

#92983, 2013 KOMATSU D65WX-16, CAB/AC, RIPPER, SIGMA, 6700 HOURS ..............$94,500

#93089,2020 TAKEUCHI TB290, AUX HYD, HYD THUMB, 455 HOURS ............................$104,500

Page 14 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doosan Unveils New DD100 Dozer, Much More for 2022 Doosan Infracore North America introduced its new products for 2022 during a media event at its Real Operations Center (ROC) in Arizona the first week of December. The company’s next generation crawler excavators, miniexcavators and new -7 series wheel loaders were featured in presentations by the respective product specialists. Doosan also unveiled its DD100 dozer, which it said will be available through dealers in 2022. Technological upgrades also were introduced, including the “Transparent Bucket.” The transparent bucket is a system that allows the wheel loader operator to see blind spots in front of the bucket through the monitor in the cockpit. The innovative system records images in front of the wheel loader with cameras installed at the top and bottom of the equipment and shows combined images in real time using a curved projection method. The front of the wheel loader has been considered an area prone to major safety issues due to its blind spots. With the transparent bucket function, however, the operator can easily check the blind spot in front of the bucket through the monitor and prevent accidents. Another advantage is that it can significantly improve work efficiency by enabling a forward-view perspective during loading/unloading or when carrying soil and sand, according to the manufacturer. DD100 Dozer Doosan’s 122-hp DD100 dozer delivers powerful pushing performance, fuel efficiency and all-day operator comfort, according to the manufacturer. The DD100 features a dual/single flange-type roller with several track guard options. Designed with operators in mind, the DD100 features the 8-in. Smart Touch display, giving operators complete control from a convenient, easy-to-read touch screen. It also offers enhanced visibility with minimized front pillars, maximum glass area and a standard rearview camera — plus LED lights and front, rear and side wiper blades. The DD100 features a Doosan engine with convenient maintenance access points and does not require the use of a diesel particulate filter to meet current emission standards. Doosan DD100 owners can add the 3D Machine Guidance and 3D Machine Control features as an option for greater

Doosan unveiled its DD100 dozer, which will be available through dealers in 2022.

accuracy and ease of operation. Specs include: • Horsepower: 122 hp • Operating Weight: 25,309 lbs. • Blade Capacity: 3 cu. yds. • Blade Height: 3 ft. 7 in. • Blade Width: 8 ft. 10 in. • Blade Angle: 22.5 degrees • Drawbar Pull: 33,721 lbf. • Track Length: 7 ft. 7 in. • Travel Speed, max: 5.7 mph (Preliminary specs, subject to change) Other Unveilings During the event, Doosan also announced several other new equipment models coming to the North American market in 2022.

DX27Z-7 Mini-Excavator Specs include: • Horsepower: 24.7 hp • Operating Weight: 6,168 lbs. • Maximum Digging depth: 8 ft. 8 in. • Maximum Digging Reach (ground): 14 ft. 10 in. • Maximum Loading Height: 10 ft. 1 in. DX35Z-7 Mini-Excavator Specs include: • Horsepower: 24.7 hp • Operating Weight: 8,807 lbs. • Maximum Digging Depth: 11 ft. 4 in. • Maximum Digging Reach (ground): 17 ft. 9 in. • Maximum loading height: 12 ft. 2 in.

Doosan unveiled three mini-excavators: the DX27Z-7 mini-excavator, the DX35Z-7 mini-excavator and the DX50Z-7 mini-excavator.

see DOOSAN page 72

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 15

563-8 872-44112 112

Bellevue (Dubuque), Iowa sales@jjscheckel.com jscheckel.com

2015 CA ATT D11T - $1,28 $1,285,000 , 85,000

2002 CA ATT D11R - $185,000 $

2017 CA ATT D10T22 - $1,460,000

2005 CA ATT D10T D - $388,000 $

Zero Hour Powertrain Componen p ts w// 4 yyearr,, 6,000 hr 7PZ High g Horse series, RRuns andd oper p ates to spec p , 1,800 Hours, 525 at idle, dl 4 Yeear warrantyy remaining, RJG S#, 1 Owner since new n w,, LLow to midlif dl fe fe componen p t l d SS factoryy Cat warrantyy. U BBlade, S Riippe pperr,, GGood UC. U-blade ipp r.. A/C, A//C /C, HHeat. Could U blade,, Multi-shank ripper pppperr,, CCAT AT Minestar M GPS GPS, hours, SS ripper pp r,, U blade ade, Twin Twin tilt tilt, Well maintained, i i d bl d w// twin tilt, SSS ripper ld use Excellent hhistory,y, straight str i & clean. Availa b Jan. 2022. paint, otherwise very straight putable machine machine. Priced to sell. ilable i h tracttor from good home. Documentedd histor hi y, Reputa R ation i machine, Like new! Clean, straight, i h and reputable

RENT OR

BUY!

2019 CA ATT D6T LGP VP PA AT - $268,000

RENT OR

2015 Deere ere 1050K - $328,000 $

4,650 hours, SUU Blade, Multi M l Shank Ripper pp r,, Topc p on GX60 Full Auto GPS syst y em comes withh machine. hi Straight, cleann & original Midwest dirt machine. ii M

RENT OR

BUY!

2016 CA ATT D6T LGP - $288,000

2013 CA ATT D6T X XW - $288,000 ,

2019 CA ATT 374FL 3 - $618,000

2019 CA ATT 3336 Next Gen - $268,000 ,

A02962. 3,960 Total hours. 2 Yeear, 2,000 hhour warranty A02981. 2,161 Totall hours, h 695 at Idle, dl 1,466 actual A02952. 2,525 Hours, 7444 Idle dl hours, h Only ly 1,781 3,663 Hours, 2 Yeears of of factory f y warrantyy remaining. 3,800 Hours, 1,367 67 IIdle dl hours, h Warrantyy untill 9/2023. / i hi Grade control.l remainingg until 9/2023. ARP Accugr g ade GPS readyy,y, operatingg hours, Full 2 year factory warrantyy remains, actual oper p atingg hours. GPS ready, Allied W6G W Winch, Reputa p tion 1 owner machine. 2D Grade control o . 12’10”” SStick. 60”” Bucket. B k 1 Ownerr,, Goodd U/C, mented hi history. S i ht bl Straight blade, history since 11’10” 0”” SStick. ti k 4 Yar Yard 60”” bucket. buck Super clean machine! Original paint, Documented D history,y, Clean C machine! U/C Clean Cl and original with ddocum t d RRear winch, i Servicce hi i new. VPPAAT AT 6-w 66-way blade, bl d doocumented history.

RENT OR

BUY!

2018 CA ATT 320 Next Gen - $159,000 $ , 2018 CA ATT 320 Next Gen Geen - $$159,000 ,

2014 CA ATT MH3059 MH30059 - $348,000 ,

A02946. 2,623 totall hhours, 1,462 off thos h se hours h at idle, dl A02915. 2,450 Total hours, 1,593 Idle hhours. 2DD GGrade d 8,250 Hours, Material handler err,, as nice as they h y come. li cabb, 325 HPP,, 2D Grade Control, 9’6”” Stick, S Aux Hydraulic Pkgg in stock. control, Deluxe pack p age g , Factoryy warranty remaining e . Ground access and high g risee hydraulic This machine won’t dissapoint, save big $$ from new! 24”” BBucket S Auxilia l 35’’ Boom, 29’’ SStick, foor grapple. 130,000 lbs. k , 9’6” ’ ” Stick, l ary hydraulics. k Setup S

(4)2016 ) Volvo A A40G’s - $268,000 , EA. (2)2015 ) Volvo vo A25G’ A25G’s - $$248,000 , EA. 55,400 400 Hour H trucks, Haalf idle time, M Matching h groupp. V y ggoodd Tailga g tes, 1 Ownerr,, EExxcellent condition. Very R d tires. Ready to Radial t go. Rent/Lease or Buy B y..

33,060 060 Hours, H 1,866 ,866 IIdle hours, Tailgates, l Mat M ching h Radial tires, Original r g pain p t, Documented history,y, Volvo deealer l inspected, Very clean.

RENT OR

BUY!

((2)2014 ) CA ATT 730C’s 730C’ - $3588,000 8 000 EA. EA

2016 CA ATT 980M - $$268,000 $268,000

Ejec Ej j tor bodies, b di 8835 & 1,418 Hours. 1 Owner. RRadial d l i Original tires. g pain p t. All maintenance hhistoryy. Super p clean, original, i l low l hour h trucks. Rent/Leease or Buy B y..

7,650 Hours, 2,671 in neutral,l Only ly 4,979 , actual k Ride R workingg hours. Radials, 7.5 Yard Yard GP bbucket, control,l Aut A o grease, Dealer maaintained, History.

B POWERTRAIN PLUS REBUILDS

ROLLERBLADES HOLMES SMOOTH DRUM R

2019 V Volvo olvo L260H 0H - $288,000 $288,000

7,320 Hours, 2,333 IIdle dl hou h urs, 9.5 Yar Yardd GP bucket, buck Ride control, 875 Radial tirres, Dealer maintained, Documented history,y, SSuper clean.

2018 V Volvo olvo LL180H - $$238,000

A02916. 6,250 HHourrs, 6.5 Yar Yardd GP bucket b k , 330 HPP,, 62,000 lbs, Auxillaryy hydaulic controls, Volvo dealer inspected. Clean andd straight, original machine.

RENT OR

BUY!

NEW!

2007 C CA ATT 826H - $288,000 $ ,

9,800 Hours on Complet pl e DDealer l Rebuild. R b ld GGoodd used i compac p tor w/ fullll main maintenance & service history. E llen feett, Clean cab, Tested to OEM specs. Excellent

RENT OR

BUY!

Ready to ship!

Holmes 11F - $25,50 , 0 / 16F - $31,500 $ 2011 CA ATT 140M VHP V - $$248,000 , Verified 735 total hours, 4551 Idl dle hhours, Only ly 284 2 Models, 11’’ or 16’’ cuttingg widthh. Made in Iowa. 2006 CA ATT D10T Rebuild Inn Process Constr i ide d. m state DOTT,, Store inside uction ggrade d , extreme dduty. For haul h l roadd & site actuall workking hhours. From - $885,000. Zero hour Powertrain Plus, M ldb d, Mid Mid-moun t Scarafier fi V Ripper. Tier 3. d lleveling l , compacting & sealing l ddi dirt prior to rain event. 14’ Moldboar OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

visit

JJSccheckel.com

2016 Volvo A40G & 2018 K-T K Tec ec 1237 2018 K-TEC C 1237 ADT - $198,000 $ ,

37 Yar Yard capacit p y ppull scraper p r,, LLess than h 800 hhours. Scraper p Pkg g - $$500,000 , 5,906 ,,906 hours on l bl b Super Matching M hi g ppair airi available, ilable p clean. l Can be b truckk. 2 Sets t Riigged gg d upp & ready e dy to go g . 37 3 yard scraper p w/ A4 for rent/sale V l o A40G / l for f addt’l dd price. b included. l d d rigged to a Volvo hitch & controlsl kit kit, orig iginal i l ttruckk dump d body included

and watch w our new company vid deo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaders, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com | follow us ffor @jjscheckel.com orr daily updates:

Page 16 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Bobcat® L23 small articulated loader is small enough to fit in small lots, backyards and other tight jobsites.

New Bobcat T76 Track Machine with Diamond 60” Tree Cutting Head

New 15-ton E145, Bobcat’s Largest Excavator in Stock with full line of all Bobcat Excavators on site and ready to rent or own.

New Bobcat Commercial & Residential Mowers in Stock!

Largest Selection in the Midwest!

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

New In Stock Bobcat MT100’s

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Farm-Rite Dassel Farm-Rite Willmar Farm-Rite St. Cloud Farm-Rite Long Prairie

Authorized Bobcat Dealer U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281 19612 US-71 • Long Prairie, MN 56347 866/514-0982

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 17

2017 CATERPILLAR 735C, ID# PGN0653, SN TFJ00247, 4275 HOURS ....................................$385,400

2011 CATERPILLAR 236B3, ID# 21B037, SN A9H00789, 3012 HOURS ....................................$21,500

2019 CATERPILLAR TL1255D, ID# 9CR6867, SN ML701905, 4235 HOURS ................................$138,420

2019 CATERPILLAR 420F2IT, ID# 9CR6791, SN HWD03700, 1860 HOURS ..............................$107,210

2015 JOHN DEERE 524KHL, ID# UGU0141, SN 668276, 14450 HOURS........................................$71,900

2019 CATERPILLAR 259D, ID# UUC0446, SN FTL22580, 2619 HOURS ....................................$50,300

2019 CATERPILLAR M320F, ID# UUC0586, SN FB200552, 585 HOURS ....................................$225,800

2020 CATERPILLAR 310-07, ID# 0CR7458, SN GWT00887, 720 HOURS........................................$128,860

2015 CATERPILLAR 12M3AWD, ID# TUC0352, SN N9P00164, 2295 HOURS ................................$184,800

2015 CATERPILLAR 374FL, ID# TUR0036, SN DNM00333, 7495 HOURS ......................................$379,600

2019 CATERPILLAR 930M, ID# SGN0356, SN KTG05137, 4760 HOURS ................................$138,300

2012 CATERPILLAR 730WT, ID# RBU0087, SN B1M03860, 9405 HOURS ........................................$199,900

2015 CATERPILLAR 277D, ID# UUC0468, SN FMT00560, 2081 HOURS....................................$52,900

2019 CATERPILLAR 299D2, ID# UUC0451, SN FD205941, 1980 HOURS ....................................$80,800

2011 CATERPILLAR 160M2AW, ID# SUC0037, SN M9K00206, 7230 HOURS........................................$138,400

2016 CATERPILLAR TL943D, ID# 6CR6160, SN MLJ00382, 1640 HOURS ............................................$86,100

Page 18 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Service Award...

LeeBoy Signs On Alta Equipment as New Holland Presents Dealer In Lower Peninsula of Michigan Its President’s Club Award to Two Alta Equipment Locations

New Holland has awarded Alta Equipment Company its President’s Club Award.

LeeBoy has signed Alta Equipment Company as its new dealer in the Lower Peninsula of Michigan.

LeeBoy has signed Alta Equipment Company as its new dealer in the Lower Peninsula of Michigan. “Alta Equipment’s asphalt focus from sales to service to parts will be a great fit for the current and future LeeBoy and Rosco customers in the state of Michigan,” said Bryce Davis, LeeBoy director of sales. Alta Equipment has a strong reputation in Michigan as a paving and construction equipment dealership. “Alta Equipment has developed an entirely separate paving and road building segment distinct from its construction group,” said Alta Equipment’s Road and Aggregate Segment Director, Ian Remijn. “We have a full-time sales

Alta Equipment has a strong reputation in Michigan as a paving and construction equipment dealership.

force focused on paving and road building, as well as segment-dedicated service technicians and parts departments. We’re fully committed, staffed and stocked to meet the equipment needs of Michigan’s paving market.” LeeBoy Territory Manager Tony Wight, who will be working closely with Alta Equipment, is pleased with the new addition to LeeBoy’s dealer network. “With the team that Alta has, from its paving specialists to a dedicated paver mechanics department, it should be exciting to see what happens in Michigan over the coming years,” he said. Alta Equipment’s paving and road building service technicians will receive factory training and certification, while the segment’s sales force will receive sales training at LeeBoy’s company headquarters. Alta Equipment’s entire sales force also will be provided with equipment walkarounds and basic training in Michigan. For Remijn, the LeeBoy line completes Alta Equipment’s portfolio of equipment for its paving and road building customers. As part of his due diligence, he spoke with other LeeBoy dealers and learned that the manufacturer was unanimously recognized as a great partner. “LeeBoy focuses on dealer profit and subsequently its sustained success while offering exceptional value to customers throughout its product line,” he said. “LeeBoy’s existing customer base in Michigan is extremely loyal and we’re looking forward to showing them how Alta Equipment enhances that relationship while introducing LeeBoy’s equipment to new and long-standing Alta Equipment customers.”  CEG

Alta Equipment Company has earned New Holland’s President’s Club Award for service and product support excellence at its Orland Park and South Elgin, Ill., facilities. The award recognizes significant dealer investment in product support capability and business practices to ensure the best support to customers. “Service Excellence” is New Holland’s dealer service standards program. New Holland recognizes its dealers’ commitment to excellence with three levels of standards: • President’s Club — New Holland’s most prestigious service award. • Blue Ribbon — New Holland dealers earning the Blue Ribbon award have demonstrated good service capability and continued emphasis on growth in crucial product support. • Basic — New Holland dealers earning the basic level of Service Excellence are working closely with New Holland to implement a comprehensive service and support strategy as they move toward a Blue Ribbon or President’s Club designation. “We are honored to receive such a prestigious Award,” said Michael Morton, regional director of product support of Alta. “The President’s Club award is a great testament of our team’s effort for ‘Fostering Customers for Life.’ We also want to thank Neil Auchmuty [New Holland aftersales business manager] and the entire New Holland organization for their support and partnership. For more information, visit construction.newholland.com and altaequipment.com.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 19

2017 Komatsu PC490LC-11 2015 Wirtgen WR200 XLI

2018 KOMATSU D61EXI-24 KM18431X 3,235 hrs.

KM17155M $239,500 3,189 hrs.

WR15021 $357,500 1,950 hrs.

2006 Komatsu WA200-5L

2017 Komatsu D85EX-18

2014 Komatsu D39PX-23

2012 Komatsu PC360LC10

KM06305U $61,500 8,343 hrs.

KM16523M $399,500 2,059 hrs.

KM14199X

$117,500 2,972 hrs.

KM12252D $118,500 6,700 hrs.

2013 KOMATSU D65EX-17

2014 Komatsu WA320-7

2016 KOMATSU WA270-7

2016 Komatsu PC240LC-11

2017 Deere 644K

KM13113X $129,150 5,669 hrs.

KM14086X $69,500 10,694 hrs.

KM16471M $107,500 2600 hrs.

KM16519X $157,500 3,383hrs.

$109,250 7,109 hrs.

2008 Caterpillar 963D

2018 Komatsu D65EX-18

2017 John Deere 310LEP

2014 LeeBoy 8510C

CT08803X $139,500 7,139 hrs.

KM18352X $209,500 3,600 hrs.

JD17004J $79,500 1,550 hrs.

LB14006X $79,500 2,219 hrs.

$249,500

2015 Komatsu PC138USLC-10 KM15152X 4,400 hrs.

$109,500

JD17003X

2015 Komatsu HM400-5 KM15268M 10,500 hrs.

$459,500

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • McAlester • Odessa • Waco • Oklahoma City • St. Louis • Tulsa

Contact Terry Lyness for details and pricing.

877.549.7501

www.kirby-smith.com

Page 20 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 21

Contact Rollie Aspenson (Used Equipment Manager)

at 608-220-1723 rollieaspenson@ brookstractor.com

See our entire used inventory at www.brookstractor.com Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 2018 DYNAPAC CC5200VI

2018 JOHN DEERE 245G LC

2018 JOHN DEERE 544K

2015 JOHN DEERE 524K

Stk #CC5200AA, 77" Double Drum, Stk #U800562, Cab/AC, Long Arm, Aux. Hyd., Stk #U687928, Cab/AC, Coupler, Bucket, Stk #C94572-9, Cab/AC, Double Diff Lock, Temperature sensors, Drive lights, 395 Hrs .... Coupler, 24" Bucket, 2673 Hrs ...................... Forks, 2861 Hrs .......................................... 3rd Spool, Ride Control, Quick Coupler, GP ..................$119,000 WITH WARRANTY ................$179,000 WITH WARRANTY ................$139,500 WITH WARRANTY Bucket, 1147 Hrs ........................................ ................$124,000 WITH WARRANTY

2015 DYNAPAC CA1300

2004 JOHN DEERE 135C

2012 JOHN DEERE 624K

2013 JOHN DEERE 85G

Stk #CA1300AC, Sheep Foot, 54" Drum, Blade, 295 Hrs ............................$59,000

Stk #C97322, Cab/AC, Long Arm, Blade, Aux. Hydraulics, CCoupler, Bucket..........$65,000

Stk #C97321, Cab/AC, Ride Control, Coupler, Bucket, 6961 Hrs ........................$95,000

Stk #C97268, 2955 Hrs, Cab/AC, Rubber Pads, Aux. Hydraulics, Coupler, 36" Bucket...... ..................................................$69,000

REMU WL180

2018 JOHN DEERE 331G

2019 JOHN DEERE 317G

2008 ETNYRE RF50TD3

Stk #C92461, Remu Dirt Pulverizing bucket off Stk #C95758, Cab/AC, HF, EH Controls, Ride Stk #C97195, 1163 Hrs, Cab/AC, EH Stk #C95089, Mechanical Folding Gooseneck, 921F Case, JRB 418 Interchange ..$17,500 Control, Wide Track, Bucket, 1131 Hrs .......... Controls, Power QT, Ride Control.................... 10' Wide, 22' Bed, Air Brakes ......$21,000 ..................................................$55,000 ..................$43,000 WITH WARRANTY

2019 JOHN DEERE 160G LC

2018 JOHN DEERE 345G LC

2017 JOHN DEERE 844K-III AH

2019 JOHN DEERE 624L

Stk #C95892, Cab/AC, 10'2" Stick, Aux. Hyds, Stk #U020151, Cab/AC, Aux. Hyd., Wide Pad, Stk #U681506, Cab/AC, Ride Control, Scale, Stk #C97352, Cab/AC, High Lift, 3 Spool, Hyd. Coupler, Bucket, 1298 Hrs ...................... Coupler, 54" Bucket, 1890 Hrs ...................... GP Bucket, 5989 Hrs .................................... Coupler, New Tires, 4661 Hrs ........................ ................$185,000 WITH WARRANTY ................$269,000 WITH WARRANTY ................$259,000 WITH WARRANTY ................$189,000 WITH WARRANTY

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Page 22 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Infrastructure Spending May Exceed New Deal Investments INFRASTRUCTURE from page 1

ty of the total investment if both proposals become law, said the think-tank: The current House reconciliation version proposes roughly $500 billion in new infrastructure spending over 10 years, the organization noted. “Combined with IIJA, the federal government could be spending $160 billion above baseline for the next five years. That would push federal spending above New Deal investments in infrastructure — as measured by federal spending as a percentage of GDP — but likely to fall short of the historic federal peak around the late 1970s.” After non-stop lobbying for a broad infrastructure bill, the construction industry’s reaction to its signing was enthusiastic but cautious. ARTBA dubbed the IIJA “the most significant measure in more than 50 years to meaningfully address the condition and performance of the U.S. transportation network.” Dave Bauer, ARTBA CEO said Congress “demonstrated not only the importance of federal transportation infrastructure leadership, but that policymakers can find common ground and govern on matters of national concern.” The one-two punch of a generation-defining Bauer saluted President Joe Biden, House members infrastructure bill and a massive reconciliation Nancy Pelosi and Steny Hoyer and Peter DeFazio; Senate budget means America will begin a building spree members Chuck Schumer, Mitch McConnell, Tom Carper, larger than what happened during the New Deal, Shelley Moore Capito, Kyrsten Sinema and Rob Portman observed the Brookings Institution. for leading the effort, along with other members of Congress the transportation construction industry, along with our engaged member companies and State Asphalt Pavement we always have, do our part for our communities and our who voted for final passage. “Members of Congress have taken tangible action that Association partners, have advocated for adequate and con- country, including our shared climate.” will benefit every state and community across the nation,” sistent federal highway funding for a very long time,” she said. Bauer said. “Asphalt pavement is already America’s most recycled Ward Nye, ARTBA chairman and CEO of Martin Generational Shift Marietta, was present at the White House, standing on behalf product, and our industry is embarking on a bold vision The IIJA is not another stimulus effort; it represents a gentoward net-zero carbon emissions,” she added. “We will, as erational shift in how and what types of projects get done, of the association and its members. “The bipartisan infrastructure law is a vicnoted Brookings. Federal agencies, includtory for all Americans,” he said. “Let’s get to ing DOT, DOE and EPA, have to oversee the work delivering transportation project outsurge in funding, including administering comes that will boost the economy and make new grants and designing new programs. our roadways and railways safer.” “States and localities, from transportation Biden tapped Mitch Landrieu, former departments to water utilities, have to identiNew Orleans mayor, to coordinate IIJA fy and execute needed projects on the implementation. Working with experts, ground. And this federal, state and local Landrieu will verify that jobs are created, the coordination all comes amid continued chalnation’s global competitiveness is strengthlenges overseeing other expanded funding ened, supply chains are opened and inflation from the American Rescue Plan earlier this is stanched. year,” said Brookings. “Our work will require strong partnerPassage of a comprehensive infrastructure ships across the government and with state investment bill also has been a tier-one priorand local leaders, business and labor to creity for the American Trucking Association ate good-paying jobs and rebuild America (ATA), which believes IIJA will bolster highfor the middle class,” Landrieu said. way safety, make long-overdue investments “We will also ensure these major investin roads and bridges and help grow and ments achieve the president’s goals of comstrengthen trucking’s workforce. bating climate change and advancing equiATA was represented at the White House, ty,” Landrieu added. and association President and CEO Chris The National Asphalt Pavement Spear praised the recognition by Congress Association (NAPA) has long supported a that “roads and bridges are not political — bi-partisan federal highway funding pro- The work ahead will require strong partnerships across the government and with we all drive them.” gram, said Audrey Copeland, association state and local leaders, business and labor to create good-paying jobs and rebuild A majority in the House and Senate “realpresident and CEO. America for the middle class, said Mitch Landrieu, tapped by President Biden to ized this truth and did what’s right for the “NAPA and like-minded organizations in coordinate IIJA implementation. see INFRASTRUCTURE page 92

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 23

Ed McKeon

Judy Nixon

Craig Mongeau

Ted McKeon

Theresa Vickers

Rob Chakler

Joe McKeon

Katherine Petrik

Richard McKeon

Mia Klimp

Barry McKeon

Sondra Rossi

Teddy McKeon Kent Hogeboom

Cathy Printz

Rich Olivier

Martine Matteo

Ed Bryden

Caitlin Murphy

Patrick Kiel

Anne Shoemaker

Dennis Hogeboom

Deby Hogeboom

Maria McKeon

Joshua Phillips

Denise Giaccio

Donna Prendergast

Sharon Swanson

Mary DeRosa Rob Tredinnick John Pinkerton

Andrea Pinkerton

Matt Seslow

Stephen Collins

Jennifer Hood

Page 24 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVAN ANCING THE E EQUIPME ENT DISTRIBUTION UTION IN NDUSTRY THROUGH O NETWORKING,, EDUCATIO T ON, & LEAD DERSHIP

DISNEY’S S CORONA ADO SPRIN NGS RESOR RT JANUARY 17 - 19, 20 022 THE ONL O Y EVENT ST TRICTLY

EXPA AND - YOUR O DISTRIBUTION ON NETWORK

DEDICATED T TO THE EQ QUIPMENT

NETWORK - WITH W DECISION MAKERS

DIST TRIBUTION IND DUSTRY Y.

INTRODUCE - YOUR O NEW PRODUCTS & SERVICES V ES

WHAT IS TH HE AED SUMMIT T?

More inf M i for ormation tion on the 2022 AED Summit ummit visit us at:

The Summit is i the only industry event that brings to ogether equipment distributors, man m ufacturers and ser s vice providers under one roof.

bit.ly/20 y 022Summit

'HDOHUV DWWHQG WR ÀQG QHZ SURGXFWV WR GLVWULEXWH OHDUQ ZKDW·V QHZ WKDW FDQ KHOS WKHLU EXVLQHVVHV DQG QHWZRUN ZLWK LQGXVWU\ SHHUV 0DQXIDFWXUHUV DWWHQG WR PHHW ZLWK WKHLU H[LVWLQJ GHDOHUV DQG ZLWK QHZ

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 25

KANSAS CITY • JOPLIN • WICHITA TOPEKA • GARDEN CITY

816-241-9290 www.VLPCO.com

SALES • PARTS • SERVICE

CASE 821G T4B

CASE 621G T4B

2021 CASE 850M, NEW - 1 LEFT

2021 CASE 2050M, NEW - 1 LEFT

New CASE SV208DSM Padfoot Roller, EQ0008569

CASE 580SN T4B

2021 CASE 580SN, NEW IN STOCK

2021 CASE TV450B, NEW IN STOCK

Page 26 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 27

Page 28 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Distinguished Service Award...

Southeastern Equipment’s Founder, Bill Baker, Receives Muskingum University Award Muskingum University in New Concord, Ohio, recently celebrated outstanding alumni by awarding three past graduates with the Distinguished Service Award. Among the honorees was Cambridge native and Southeastern Equipment founder, Bill Baker. A 1957 graduate of Muskingum University, Baker has always credited his success to his time at the university. “Without this, I wouldn’t have met wonderful people,” said Baker. “I met a lot of great people, and even if I had not sat in a class, meeting those fine people would’ve been worth it.” The award recognizes individuals who have provided exceptional service to the university. Nearly 65 years after graduating from Muskingum, Baker has built one of the Midwest’s largest equipment providers all while continuing to invest in his hometown and alma mater every step of the way.

“I’m proud of what my grandfather has done for so many over the years,” said Thor Hess, Southeastern EVP. “He’s taught all of us to focus on taking care of people, and that lesson will always be with me.” Southeastern Equipment Company has been selling, servicing and renting heavy machinery since 1957. The company has 18 locations throughout Ohio, Michigan, Kentucky and Indiana. Manufacturers represented by Southeastern Equipment Company include: Case Construction, Kobelco, Bomag, Gradall, Rubble Master, Mauldin Paving Products, Etnyre, Vacall, Schwarze, Eager Beaver Trailers, Superior Broom, Fecon, Skyjack, JLG, Sullair, Werk Brau, and several others. For more information, visit southeasternequip.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 29

Page 30 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Growing Demand...

South Dakota DOT Receives Federal Infrastructure Bill Grant for Freight Capacity Expansion

Calls On Industry to Require Innovation

The construction industry has burst into a flurry of activity as the most aggressive infrastructure spending initiative since the 1950s was signed into law on Nov. 15. Combined with a skilled labor shortage, the $550 billion bill calls into question whether contractors have the capacity to meet rapidly growing demand. Innovative contractors across the nation are turning to new technology for help. Robots as a new class of equipment are showing to be an effective complement to human crews and may prove essential to completing the projects laid out within the infrastructure bill. Woman owned Disadvantaged Business Enterprise, Shelby Erectors, is an example to contractors across the country on the effective usage of robotics on the job site. Contracted for rebar installation on the 512,427 sq. ft. I-95 Express Phase 3C project in Ft. Lauderdale, Fla., Shelby elected to utilize TyBot by Advanced Construction Robotics to boost crew productivity. TyBot, a rebar tying robot, leverages cutting edge artificial intelligence to tie together the rebar grid that commonly reinforces concrete surfaces. While TyBot is actively tying rebar, Shelby’s laborers are free to handle more skilled tasks better suited for human hands. Shelby stands tall in the industry as an example of how to adapt to modern challenges, and its president, Jennifer Nix, is positioning her company to meet the labor demands of the new infrastructure bill. “As the labor gap in construction continues to grow with increasing demand, it is crucial to incorporate solutions like TyBot to mitigate the effects. We have found that TyBot saves at least 25 percent on our rebar tying schedule. This provides a crucial edge when bidding projects, and project owners, typically DOT, often like to see innovative tech used,” Nix said. “TyBot is definitely a lifesaver when labor availability is lacking. It provides a level of consistency that’s difficult to match and is why we’re currently using it on three separate concrete bridge construction projects across Florida. “TyBot removes the repetitive, back-breaking work that can cause serious long-term injuries, and anything we can do to improve our crews’ health and safety is a huge priority for us. TyBot allows us to safely stay on schedule while shorthanded and to move our workforce on to higher skilled tasks or to another jobsite where they can be better utilized,” said Nix. “ACR was founded for moments like this. Our robots will continue to solve today’s construction challenges assisting the workforce to meet rapidly growing demand, such as what will generated from the infrastructure bill,” said Searock, cofounder, ACR. For more information, visit www.constructionrobots.com. 

The South Dakota Department of Transportation (SDDOT) was recently awarded a Rebuilding America Infrastructure with Sustainability and Equity (RAISE) Grant through the U.S. Department of Transportation. The RAISE Grant is designated for the Freight Capacity Expansion Project with Rapid City, Pierre & Eastern Railroad (RCP&E) through Pennington, Haakon and Stanley counties in South Dakota. SDDOT applied for the federal RAISE grant in July to upgrade main line rail between Fort Pierre and Rapid City. State and federal grants help the railroad increase its capacity and upgrade the line for the betterment of South Dakota. Recognizing the importance to the public and the economy of finishing this effort in a prompt fashion, a South Dakota Senate Bill (SB 93) was introduced and passed the legislature by overwhelming margins calling for $20 million in state funds to be available to RCP&E to use as matching funds for a federal grant to upgrade the line. Gov. Kristi Noem signed the bill into law on March 22, 2021. “South Dakota is focused on critical infrastructure to drive future growth and economic development, and this project will do that for all of western South Dakota,” said Noem. “Together with the $20 million appropriated by the state to this project, this funding from the U.S. Department of Transportation will support a project that will benefit South Dakota for generations.” Since its start-up on June 1, 2014, RCP&E has been aggressively investing in its infrastructure to better serve South Dakota and Wyoming. The railroad company has spent more than $52 million in routine maintenance work, and more than $68 million in track and bridge capital improvements. These investments

provide safe, efficient and competitive freight services for current and future RCP&E customers in South Dakota. “The project directly restores a critical transportation asset to conditions that allow for industry standard fully loaded 286,000-pound rail cars at speeds up to 25 miles-per-hour,” said Joel Jundt, Secretary of Transportation. “This improvement will result in reduced maintenance costs and increase the productivity of the rail line, benefiting the railroad and the variety of commodity shippers who use it. The project will reduce the risk of derailments and bridge failure, increasing safety. The project also is expected to result in reductions in emissions due to more efficient operation and the possibility of attracting more freight to travel by rail, improving environmental sustainability.” This monumental RCP&E Freight Capacity Expansion Project replaces approximately 87.7 mi. of aging rail with new 136-lb. continuous welded rail; upgrades 121 bridge structures; installs 80,000 main line cross ties; replaces 11 main line turnouts; upgrades 122 grade crossings; and installs safety improvements on the line. The estimated $84 million total project cost will include $42 million provided by RCP&E, $20 million from the state of South Dakota and $22 million provided through the RAISE Grant. The project will improve safety of rail operations, dramatically increase train operating speed on the line and allow for handling of modern fully loaded freight cars. The project will directly support current shippers using the line to help them more effectively compete in their respective domestic and international markets. The upgrades will also enhance new industrial and agricultural development potential. For more information, call 605/773-3574 or visit dot.sd.gov. 

Illinois Tollway Board Awards $109M in November for Construction Contracts The Illinois Tollway board of directors on Nov. 18 approved three construction contracts totaling nearly $108.8 million at its November board meeting. So far, nearly $709 million in contracts has been approved by the Tollway board in 2021, as part of the tenth year of the Tollway’s 15-year, $14 billion Move Illinois capital program. To date, nearly $9.4 billion has been invested by the Illinois Tollway since the Move Illinois Program began in 2012, with more than $2.4 billion of that total committed to small, diverse and veteran-owned firms. In addition, the capital program has created or sustained an estimated 102,730 total jobs as of October. Construction contracts awarded

include: A $107.4 million contract to Lorig Construction Co. of DesPlaines, Ill., for railroad track relocation, retaining wall construction and earthwork as part of the new I-490 Tollway Project. A $1.2 million contract to Western Remac Inc. of Woodridge, Ill., for overhead sign structure repairs on the Jane Addams Memorial Tollway (I-90) between Barrington Road and Higgins Road. A $165,710 contract to Metromex Contractors Inc. of McCook, Ill., for rehabilitation work on York Road between Thorndale Avenue and Supreme Drive as part of the Illinois Route 390/I-490 Tollway Interchange Project. The contracts approved include one

contractor and six subcontractors that are certified as disadvantaged, minority-and women-owned business enterprise (D/M/WBE) firms and two subcontractors that are certified veteranowned firms. Commitments for D/M/WBE participation range from 27.14 percent to 42.01 percent per contract and commitments for veteran participation range from 0.80 percent to 3.02 percent per contract. Construction contracts for Illinois Tollway projects are competitively bid under the rules of the Illinois Procurement Code. All contracts are presented to the Illinois Tollway board of directors for review and approval. For more information, visit illinoistollway.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 31

DRESSER TD15C 4,008 Hrs, Machine drive train serviced and ready for work! $24,500

618-435-2330 Benton, Illinois WWW.BRTRACTOR.COM

Page 32 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Altorfer Rents, Sullair Continue Partnership Amid Expansion Sullair, a manufacturer of compressed air solutions since 1965, is expanding its partnership with Altorfer Rents in supplying portable air compressors to the construction, agriculture, landscaping, mining and other markets. Altorfer Rents has seen recent rapid growth in the Chicagoland and northwest Indiana regions and plans to add two new rental stores opening in Oglesby and Quincy, Ill. in November 2021 and early 2022. Sullair air compressors will be available for rent and sale, and Altorfer also will install Sullair industrial compressors for use in its in-house service shops at the new locations. Altorfer Rents supplies a variety of industry with equipment and tool rental and sales and service including heavy machinery, power supply and specialized tools. Sullair supplies Altorfer Rents with several air solutions small and large, including portable compressors from 185 to 1600 cfm and pneumatic air tools. “What Sullair provides is invaluable for us,” said Tim Gerken, vice president of rental and lift trucks of Altorfer. “Sullair is a very solid and industry-standard brand out there. Our partnership with Cat engines and Sullair machines is

Derek Altorfer (L), president of Altorfer, and John Randall, president and CEO of Sullair, will continue the more than 30-year partnership of the companies.

Sullair is expanding its partnership with Altorfer Rents in supplying portable air compressors to the construction, agriculture, landscaping, mining and other markets.

invaluable to us — and our growth strategy.” Sullair has been a supplier and trusted partner of Altorfer for more than 30 years. Gerken attributed that partnership to not only the durability of the Sullair brand, but the trusted relationship between Altorfer and Sullair team members. “When you have the quality of Sullair products and great people behind you, you can bring to bear great solutions. It is a great partnership,” he said. Altorfer CAT relocated from its Elmhurst store and opened three new locations in 2021. A rental location in Naperville; a power systems location in Addison; and two construction locations in

East Dundee and Mokena, Ill. The new modern facilities have helped to expand the company’s capabilities while serving both new and current customers in the Chicagoland area. Altorfer’s service territory now includes 35 locations across portions of Iowa, Illinois, Missouri and Indiana. The two new locations will cement the company’s presence beyond Chicagoland and provide rental, sales and service to customers in central Illinois. “We represent the best brands in the construction and industrial equipment markets, and we hire and train our people to be up to speed and competent to support the equipment and brands we carry,” said Gerken. “Our team members provide more than equipment, they provide solutions and Sullair is a strong part of that solution.” For more information, visit altorfer.com/rentals/ and www.sullair.com. 

Benton Harbor Starts Accepting Bids to Replace Lead Pipes By David Eggert ASSOCIATED PRESS

LANSING, Mich. (AP) Benton Harbor leaders announced Nov. 29 that the city is accepting bids from contractors for an ambitious project to replace all lead water pipes no later than 2023 due to elevated levels of the toxic metal in the municipal supply. Because the “action level” for lead has been exceeded, for three years, the estimated 2,800 service lines generally must be removed over 14 to 15 years under federal and state regulations. Gov. Gretchen Whitmer promised last month to spend millions of dollars to replace them in 18 months.

Benton Harbor formally invited bids and released details about the plan on Nov. 29. “We’re very excited here in the city to make that announcement. I know that it will be received gladly,” Mayor Marcus Muhammad said in an interview. Residents in the impoverished, predominantly Black community have been encouraged to use bottled water for cooking, drinking, brushing teeth, rinsing foods and mixing powdered infant formula Muhammad said he anticipates contractors lining up to bid for the work. “It’s almost like a gold rush, for lack of a better example, any time there’s $30 million on the table,” he said.

Companies will be required to use trenchless technology to minimize the disruption to properties. They will have to restore the condition of driveways, sidewalks and landscaping. And there will be incentives and penalties to ensure the work is done well and on time. “We focused on collaboration and expertise across the public and private sector, and we developed a plan to move quickly and serve as a model for other communities in Michigan and across the country,” said Regina Strong, the state’s environmental justice public advocate. Benton Harbor, she said, is another example of an under-resourced community with aging infrastructure. Earlier this month, the Environmental

Protection Agency instructed the city to improve corrosion control, repair filters at its treatment plant and better notify residents of lead exceedances. The Whitmer administration has estimated it could cost $30 million to replace all 6,000 service lines, many of which consist of lead or unknown materials. The state has contributed $10 million. The city also is receiving $8.6 million in federal grants and loans for pipe replacements. Muhammad estimated it will cost $5,000 on average to replace each lead line. “We’re right where we want to be,” he said of the funding secured to date. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 33

100%

GRIT

When the world stopped, you kept going. Adapting. Giving a master class in resilience and being an essential worker. Now, celebrate how far you’ve come and discover the innovation helping our community evolve, endure, and thrive. Part knowledge, part equipment, part connections—World of Concrete is 100% of what you need to keep grinding it out through disruptions to the supply chain, safety and beyond. Get your hands on advanced technology, machinery, and tools, access the newest training and techniques in concrete and masonry, and build momentum for another unstoppable year.

GO ALL IN: www.worldofconcrete.com

EXHIBITS: JANUARY 18-20, 2022 EDUCATION: JANUARY 17-20 LAS VEGAS CONVENTION CENTER

Page 34 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby-Smith Machinery’s David Mehrtens Passes Away

STOPS FUEL GELLING NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wraps around the filter housing and reduces or eliminates the possibility of cold weather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternating current or a convertible model combining dc and ac. A standard 12V or 24V Universal Fuel Filter Preheater is priced at $138.

BULK FUEL STORAGE FILTER HEATER The newest Diesel Fuel Filter Preheater fits 3.5" to 4" diameter by 7" to 10" tall filters. Stops diesel gelling in the filter so that fueling equipment can proceed even in the coldest temperatures. 120v with thermostat. $225.

The ‘peel & stick’ Universal Preheater attaches to the bottom or the side of the oil pan and converts the housing into a heat transfer element. It warms the oil without burning it making cold starts easy. It can be used on gearboxes, transmissions, transfer cases, water tanks and even bulk oil tanks. The Preheater plugs into any 120 or 240 volt outlet and consists of a thin silicone fiberglass pad containing a metal grid. To install it, you clean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edges of the pad and place a flexible ceramic insulation pad over it. It is available in several models depending on the lube capacity. A 50 watt unit sells for $44 and a 350 watt unit sells for $133.

PO Box 83, North Aurora, IL 60542-0083

630-966-8992 Fax: 630-801-9569 sales@etipinc.com • www.etipinc.com universalpreheater.com (Veteran Owned Small Business)

David A. Mehrtens

David A. Mehrtens, 61, of Lenexa, Kan., passed away Dec. 3, 2021. He worked in the construction equipment industry for more than 40 years, most recently serving KirbySmith Machinery as its director of remarketing and used equipment.  Message from Ed Kirby, John Arapidis The entire Kirby-Smith family is still in mourning over the news last Friday regarding the passing of our dear friend and colleague David Mehrtens. Chairman of the Board Ed Kirby and President John Arapidis have prepared the following statement: As we mourn the loss of David Mehrtens, our sincerest condolences go out to his wife Robyn, his daughters, and the entire Mehrtens family in this difficult time. David had no trouble integrating himself into the Kirby-Smith family when he left Kansas for Oklahoma City to become our Director of Remarketing and Used Equipment in 2017. Indeed, he endeared himself to everyone he encountered and exemplified the best of our principles in his selflessness, honesty, loyalty, and friendship. David loved to teach others and had the gift

of making learning fun. He invested so much time into so many of us, and in doing so has established a strong foundation that will continue to shape Kirby-Smith Machinery long after his passing. As a professional, the impact David made on this company was both sizable and immediate. His wealth of experience at pricing and trades, along with a penchant for always finding the right equipment for customers, allowed him to gain the trust of our salesforce overnight. One of the most respected used equipment managers in the entire industry with a network of contacts second to none, David’s presence helped elevate our used equipment business to new heights. He was a great teammate who was passionate about selling equipment and helping others, and he continued to serve as a valuable resource and mentor into his final days. In closing, we reflect on how much David loved being a part of Kirby-Smith Machinery, and how much this company loved him for being here. Though we have all lost a good friend, we are incredibly fortunate to have had someone with the character and integrity of David Mehrtens in our lives, and he will be deeply missed. 

Pages 35-48

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Scrap Metal Business Relies On Atlas Material Handlers

An operator uses an Atlas 300 MH material handler to move scrap metal at Charleston Steel & Metal Co.’s facility in North Charleston, S.C.

Founded in 1893, Charleston Steel & Metal Co. has a long history in the Charleston, S.C., area. Horse-drawn wagons originally An operator uses an Atlas 300 MH material handler to move scrap metal at Charleston Steel & Metal delivered scrap metal to founder Co.’s facility in North Charleston, S.C. “We added the Atlas 300 MH two years ago, and it’s been dependable,” said Michael Hardie, operations manager. “There’s been minimal downtime with the machine. Samuel Steinberg’s backyard on That enticed us to add the second 300 and a 350 machine.” King Street. The business has been passed down through four generations and continues to be family To sort material, machine. That enticed us to add the second Machinery Company, which has an office in owned and operated. Charleston Steel & 300 and a 350 machine. nearby Ladson, S.C., and Tim Hyland, a Currently, Samuel’s grandson Michael Hardie, operations Metal Co. utilizes “We use all three machines for various Linder and SMH Group sales representative. Bernard Steinberg is the CEO of manager two Atlas 300 MH purposes,” said Hardie. “Primarily they’re “Having a local service provider instead the scrap recycling facility in North material handlers used to load and unload any trucks that of waiting on an out-of-state service has Charleston, and Samuel’s great-grandson and an Atlas 350 MH material handler. The arrive on-site. We also use them to load scrap been very helpful for us,” explained Hardie. Jonathan Steinberg is the president. Atlas 300 MH features a 47-ft.-2-in. reach, into shears that cut the steel down to smaller “Linder has great liaisons that go between “Our facility takes in recyclable steel, while the Atlas 350 MH provides a 59-ft.-9- sizes, as well as general cleanup around the service and sales and go the extra mile to get copper and aluminum,” said Operations in. reach. The extendable cab space on all yard.” us the parts we need. In an industry like this, Manager Michael Hardie. “We sort it, cut it, three machines allows operators to safely if we’re not producing steel to go to the scrap and then we send it back to the mills where move about the scrap yard and handle the Local Service Important mill, we’re losing money. Linder does a they melt it down and start the recycling diverse metals on-site. When looking for a new material handler, good job of servicing our machines to maxprocess over again. We have a streamlined “We added the Atlas 300 MH two years finding a dealer with local service was imize uptime and keep us profitable.” process and run our operation to be as effi- ago, and it’s been dependable,” said Hardie. important. Charleston Steel & Metal Co. (Reprinted with permission from CPIcient as possible.” “There’s been minimal downtime with the chose to partner with Linder Industrial Linder Link Magazine.) 

Page 36 • December 11, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

PROVEN N UPTIME WITH UPTIME U KITS SENNEBOGEN, in keeping with their philosophy to maaximize uptime, uptime has created UPTIME Kits. W Whether you are a service technician in-house or on the road, these kits have everything you y need for every service, maintenance and PM task in one place. They were created to save you time and money. Managing hundreeds of related service parts, from belts and nuts to O-Rings and special tools becomes eassy with a single part number to order and stockk.

E H T D N O Y BE

E N I H C A M MIISSIONe A N O E R A E W i e your uptim imiz

to max reduce your and Ownership. f o t s o C l a t o T

They are: • Easy to order an nd easy to stock Ţ 1BDLFE XJUI KPC C TQFDJŻD components an nd tools • Ideal for stockin ng service shops and truccks Choose from the following f kits:

ing industry-lead NEBOGEN for efficienccyy. N E S st u r tr You nd safetttyy, an productivittyy, nd the machine” with y eyo “bey i k “b hin pport. Now th NEBOGEN su life-long SEN

• Central lubricattion system kits • Preventive main ntenance service kits • O-Ring kits • Electrical servicce kits • Hydraulic servicce kits

PEOPLE

tion support Expert applica

And the best thing is that these kits, in stock and ready to go, are custom-built to match your machine model and series. Count on 4&//&#0(&/ UP NFFU ZPVS OFFET JO UIF ŻFME or in-house. For m more information on UPTIME Kits scan the QR code. Kits, code

BRANDEIS MACHINERY & SUPPLY COMPANY

ALTA EQUIPMENT COMPANY

www.brandeismachinery.com

www.altaequipment.com

Louisville, KY 502-491-4000

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

Gary, IN Orland Park, IL South Elgin, IL Ottawa, IL Spring Grove, IL Wauconda, IL Bloomington, IL 844-GO2-ALTA

SERVICE

PARTS

ed technicians Factory-train l training Free technica

partss Local in-stock service kits Prepackaged

ancing Innovative fin

Learn more about our commitment to our customers

sennebo bogen-na.com/be /b yond-the d th -machine hi

+ 704-347-4910 +1-

seennebogen-na.c na com

ROLAND MACHINERY CO.

VLP

ROAD MACHINERY & SUPPLIES CO.

www.rolandmachinery.com

An EquipmentShare Company www.vlpco.com

www.rmsequipment.com

Carterville, IL 618-985-3399 East Peoria, IL 309-694-3764 Bridgeton, MO 314-291-1330 Columbia, MO 573-814-0083 Cape Girardeau, MO 573-334-5252 Palmyra, MO 573-769-2056

Franksville, WI 262-835-2710 DePere, WI 920-532-0165 DeForest, WI 608-842-4151 Eau Claire, WI 715-874-5400 Schofield, WI 715-355-9898 Slinger, WI 262-644-7500 Escanaba, MI 906-786-6920

Kansas City, MO 800-878-9290

Savage, MN 800-888-9515

East Moline, IL 800-633-9114

Joplin, MO 800-878-8223

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Wichita, KS 800-878-3346

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Topeka, KS 800-878-4345

Sioux City, IA 800-633-9104

Garden City, KS 800-511-1435

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 11, 2021 • Page 37

www.aisequip.com m 33600 N Grand River Av Ave L i Lansing, MI 48906 48906 5177--321-8000

Sa aginaw 4600 46 00 AIS Drive Di Bridgepo ort, MI 48722 722 989-777 9897777-0090 0090 Grand Rapids Travverse City 600 44th Street SW 8300 M-7 -72 East G Grand Rapids, MI 49 49548 Williamsb burg, MI 4969 49690 231--2267 267-5060 616-538538--2400 West s Detroit Northeast Detroit 56 6555 Pontiac P Trail 65809 Gratiot Av Avenue New Hud dson, MI 4816 655 Leno ox x, MI 48050 248--4377--8121 586--7727 27--750 5022 800-4 457 57--8121

www.butlermachinery.c y com 3402 02 36th St SW Fargo, ND 58014 701--2280-3100 800--7726--77475 3630 Miriam Av Ave Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-4 45656-1400 1201 S 46th St Grand G d Forks, F k ND 58201 701--77 7775-4 4238

1505 Hwyy 2, Bypass E Minot, ND 58701 701-8 852-3508 4950 E High Highway 12 Aberdee en, SD 5774 401 60505--22 225-6 62240 3601 Deadwood Av Ave N Rapid City C , SD 57770 02 60505-34 42-4850 2-4 2057 0571 Tru uck Stop A Avve Pierre e, SD 57750 501 60505--22 2244-5400 3201 N Louise Av Ave Sioux Fa alls SD 5771107 alls, 605--336-3010

www.centralsands.co om 4219 E 50th St • Des Moines, IA A 50317 50 800--2247 47-2400 • 515-964-8 8600

G Good work deserves good tools The Lokotrack® ST2.3™ mobile screen

www.rbscott.com 1011 Short St • Eau Claire, WI 54 47701 715-832-9792

The Lokotrack® ST2.3™ mobile screen provides depe endable screening power and the best screening performance in its weight cla ass. Its wide screening area, aggressive stroke and large screening angle make th he ST2.3 the ideal tool for Ŧ Ę ĝ Ę Ť ě Get the job done with the Lokotrack ST2.3 mobile scr c een. Con ntact your Metso Outotec distributor or learn more at mogroup.com/lokotrack.

www.roadbuildersmachine ery.com y 1001 S 7th St Kansas City, KS 913-371-3822 4115 S 90th St Omaha, NE 4022-331-9 92200

5601 Fle etcher Av Ave Linccoln, NE 40202-3325-044 477 4949 49 Ju Juer uergen Rd Grand Island, NE 308-3384--2620

1303 S Chestnut St Norfolk, NE 40202-316-4640

mogroup.com

Page 38 • December 11, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

mhl 375 F -SERIES

COMPANY WRENCH www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850 1330 KY-151 Frankfort, KY 40601 502-699-2681

McCOY

STRONG. RELIABLE. E EFFICIENT. Discover Morre Fuchs World- Class Material Handlers

mccoycf.com 200 Erb Industrial Dr. Fenton, MO 63026 636-349-0200 Foristell, MO 636-463-2500 Cape Girardeau, MO 573-334-0563 Cuba, MO 573-885-0500 Owensboro, KY 270-684-2339 Paducah, KY 270-554-1131 Mount Vernon, IL 618-244-6800 Evansville, IN 812-473-0484

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 11, 2021 • Page 39

Page 40 • December 11, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

TOMRA Pioneers Use of Deep Learning Tech in Wood Recycling Sensor-based sorting specialist, TOMRA Recycling, has further strengthened its offering for the global wood recycling sector by using deep learning, a subset of artificial intelligence, in wood recycling applications. The company has combined its AUTOSORT technology with its deep learning-based sorting add-on, GAIN, to create a solution that can distinguish between and sort different types of wood-based materials, significantly enhancing customers’ sorting and manufacturing processes. The primary application for TOMRA Recycling’s new solution is sorting Wood A — non-processed wood — from Wood B — processed wood products such as MDF (medium-density fiberboard), HDF (high-density fiberboard), oriented strand board (OSB) and chipboard. TOMRA Recycling has been a frontrunner in the global wood recycling sector for more than 10 years. The company’s X-TRACT solution quickly became popular with chipboard manufacturers to produce a clean recycled woodchip fraction by sorting and separating out the inert material (glass, stones, ceramics, etc.) and metals. Once the XTRACT unit has removed these impurities, the recovered woodchip is of sufficiently high quality to be used in the production of standard chipboards, according to the company. Achieving Higher Purity Levels In recent years, however, TOMRA Recycling has been approached by an increasing number of customers who are looking to use recycled wood of a much higher purity level in their production processes. To achieve these specific purity requirements, in addition to removing the inert material and metals in the infeed stream, other impurities including engineered wood composites as well as polymers, would have to be removed. As these materials are not distinguishable using x-ray technology, the X-TRACT unit was unsuited to this sorting task. Determined to help these customers and recognizing a

potential gap in the market for a solution which would allow companies in the wood recycling sector to optimize their wood sorting processes, TOMRA Recycling’s deep learning experts developed an application that combines TOMRA’s AUTOSORT unit with its deep learning-based sorting addon, GAIN. TOMRA’s Wood A vs Wood B application uses deep learning technology to sort and extract impurities that couldn’t previously be detected, making it possible for the first time to detect, analyze and sort every different wood type, therefore cleaning up the real wood fraction. TOMRA is the first company in the world to use deep learning technology to detect and separate different wood types, targeting Wood B (processed wood composites) as impurities to leave a clean Wood A fraction (non-processed wood), or, depending on customers’ requirement, producing individual high purity engineered wood composite fractions out of the infeed stream, the company said. Philipp Knopp, product manager at TOMRA Recycling, said: “Wood recycling is a fast-evolving market, with increasingly stringent legislation being introduced in a number of regions globally to move towards a more circular economy model. Our AUTOSORT with GAIN solution uses deep learning technology to create a robust and flexible solution, which we are confident will be welcomed by wood goods producers across to globe. It will also enable our customers to future-proof their operations as they will be better equipped to adapt and react to any future changes in the global wood recycling market such as new legislation. We are delighted to be the first in the market to offer this artificial intelligence-based solution.”

TOMRA Recycling has combined its AUTOSORT technology with its deep learning-based sorting add-on, GAIN, to create a solution that can distinguish between and sort different types of wood-based materials, significantly enhancing customers’ sorting and manufacturing processes. Non-processed wood.

About TOMRA Recycling TOMRA Recycling designs and manufactures sensorbased sorting technologies for the global recycling and waste see TOMRA page 46

Lake Erie Portable Screeners Debuts PB127 Static Grizzly Lake Erie Portable Screeners, manufacturer of Pitbull portable material processing equipment, announced the debut of its new Pitbull PB127 static grizzly. The designation references the 12-ft. wide by 7-ft. deep by 7ft. 10-in. high overall dimensions of the new grizzly. The main frame is constructed of rugged fully welded 3-in. square structural tube steel with a 3/8-in. wall thickness. The new PB127 bridges the gap between the company’s smaller PB86, PB106 static grizzlies and its largest static grizzly, the PB148, for a total of four grizzly size options. The PB127 Static Grizzly is designed to provide years of service handling the toughest material — from rocks to demolition rubble. Applications include work on construction and demolition sites, as well as landscape and municipal work. The PB127 Static Grizzly features easilyadjustable, bolt-on culling bars that are factory set standard at 4-in. minus spacing, which may be changed to accommodate dif-

Lake Erie Portable Screeners debuts its new Pitbull PB127 static grizzly.

ferent material sizes. Additional bars may be added to provide a minimum of approximately 1-in. spacing, or bars may be removed to facilitate screening of larger materials. The PB127 comes with heavy duty “D” rings for safe and efficient loading and unloading. Purpose designed with a lower profile than its PB148 sibling, the PB127’s size makes it transportable on a standard flatbed truck. The operating weight of the standard grizzly is 4,905 lbs. and is compatible with any material handler capable of minimum 7-ft. 10-in. dump height. Engineered and manufactured at the company’s headquarters in Lake City, Pa., the PB127 adds to the company’s lineup of heavy-duty grizzlies, portable screeners, conveyors and feeders. The new PB127 is scheduled to be available for delivery this winter. For more information, visit pitbullscreeners.com.  CEG

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 11, 2021 • Page 41

A WIRTGEN GROUP COMPANY

T WO O POWERFUL PR RODUCTS. ONE GREAT RESULT. KLEEMANN CRUSHING AND SCREENING G PL ANTS

PERFORMANCE AND EFFICIENCY Y.. KLEEMANN crushing and screening plants can be optimally combined to create a quality end-produc t. An extensive selec tion of mobile jaw, impac t and cone crushers and screening plants, available as scalping and classif ying screens, open up the most diverse applications. With KLEEMANN plants, you’ll achieve the best results – in natural stone, recycling and mining. www.wirtgen e -group.com

WIRTGEN AMERIC A , INC . · 6030 Dana Way · Antioch, TN 37013 · Tel: (615) 501- 0600 · Fax: (615) 501- 0691

www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 • 800-352-2757 329 2nd Street Industrial Building 145 Proctor, MN 55810 800-352-2757

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

www.rolandmachinery.com

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Page 42 • December 11, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Bramco-MPS Announces Promotion of Mark Strader to Vice President Bramco-Material Processing Solutions (MPS), a member of the Bramco family of companies, announced the promotion of Mark Strader, general manager, to be an officer of the company as vice president. This promotion is effective Jan. 1, 2022. Bramco-MPS provides crushing, screening and processing equipment as well as replacement parts and service. The company represents such brands as Kleemann and Terex MPS. “Mark joined Bramco-MPS five years ago and brought with him more than 20 years of experience in the material processing, crushing and screening industry,” said Michael Brennan, president and COO of Bramco. “Here at Bramco-MPS, he has overseen growth within this vital segment of our business and has created a culture of collaboration and teamwork with the employees. I am pleased to work with him and look forward to continued success in our material processing business.” Strader is grateful for opportunity to grow with the company. “Our business, like so many, has seen great change during these last few years,” he said. “I have always felt that in addition to reputable and solid business partners, you need to rely on your people to grow. We have a great group here at BramcoMPS and I feel fortunate to work with them and expand my leadership reach.” Strader has been the general manager of Bramco-MPS since 2019, after joining the company in 2016 as its sales manager. Before joining the Bramco-MPS team, he worked with PHOENIX Process Equipment Co for 16 years. He currently is on the associate committee of Kentucky Crushed Stone Association and is a member of the Professional Development Committee of Indiana Mineral Aggregates Association. For more information, visit bramcomps.com. 

Chip Young

current vice president of product support. “With his extensive background in customer development and his knowledge of our business, this transition should be seamless for our cus-

(Brush Chippers, Stump Grinders, Skid Steer Attachments)

1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640

West Chicago, IL 630-293-0606

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

Wauconda, IL 847-526-4255

www.atlasbobcat.com

Yorkville, IL 630-553-0150

1200 East Highway 13 Burnsville, MN 55337 952-894-0894 Now open Saturday 8am-12pm CST

588 Outpost Circle Hudson, WI 54016 715-531-0801 Now open Saturday 8am-12pm CST

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

Coming Soon! St. Croix Falls, WI www.tristatebobcat.com

Mark Strader

Brandeis Machinery Announces Chip Young’s Promotion to Vice President Brandeis Machinery, a member of the Bramco family of companies, announced the promotion of Chip Young, general manager, material handling and technology solutions, to be an officer of the company as vice president. This promotion is effective Jan. 1, 2022. “Chip has done an outstanding job managing and expanding the Sennebogen line of business as well as the technology solutions group of Brandeis Machinery,” David Coultas, president of Brandeis Machinery, stated. “Chip’s experience with our organization and his outstanding leadership skills, make this promotion well deserved.” Young will become the vice president of product support of Brandeis Machinery in 2023, succeeding Keith Harlan, who will retire at the end of 2022. “I am pleased to have such a great, quality successor to lead up the product support team at Brandeis,” said Harlan,

SMALL EQUIPMENT DEALERS

tomers.” “Over these past few years at Brandeis, I have learned a great deal about the customer experience and what that means, specifically to the Brandeis Machinery customers,” Young said. “My goal is to continue the great traditions of quality and service in place today and I look forward to the challenges ahead.” Young came to Brandeis Machinery with a diverse background, bringing experience in marketing, product management, channel management and commercial management. In 2007, upon the sale of Ingersoll-Rand’s road development business, Young was transferred to Volvo Construction Equipment, where he continued his career in dealer development, later becoming Volvo Construction Equipment’s director of commercial management for both North and Latin America. For more information, visit bramcomps.com. 

Cincinnati, OH 513-874-8945

Reynoldsburg, OH 614-863-1300

Mt. Orab, OH 937-444-3865

Zanesville, OH 740-313-0087

Hillard, OH 614-876-1116

Lexington, KY 859-254-3936 www.bobcat-ent.com

Bobcat of Indy 2935 Bluff Road Indianapolis, IN 46225 866-442-3052

4489 S Indianapolis, Road Whitestown, IN 317-769-4946

2075 E CR 67 Anderson, IN 765-643-4222

2002 West 3rd Street Bloomington, IN 812-287-8042

www.bobcatofindy.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 11, 2021 • Page 43

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

LARGE EQUIPMENT DEALERS THE BEAST 2460XP Trrack Horizontal Grinder

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255

MODEL BTC-300 M BT B Trrack Carri rie ier

www.lec1.com

M MODEL 3590XL W Whole Trree Chipper pp

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

677500 Millbrook Rd. • Remus, MI M 49340 • 1-800-952-0178 FIN FIND ND US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

MODEL SG-75 Trrack kS Stump pG Grinder i d

Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Effingham, IL 217-717-4550 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer

Page 44 • December 11, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Northern Indiana

Midwest Crushing & Screening

(6 Counties)

7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com

847.271.5027

Kentucky

Indiana

Minnesota

& Michigan

Powerscreen Crushing & Screening

Powerscreen Crushing & Screening Indiana

Theco, Inc.

Powerscreen Michiana

11901 Westport Road Louisville, KY 40245

255 N. Hetzler Court Angola, IN 46703

12346 Southeastern Ave Indianapolis, IN 46259

www.powerscreensales.com

502.326.9300 • 800.227.0534

317.778.6677 • 800.227.0534

www.powerscreenindiana.com

260.665.5816 • 800.843.4277

Ohio

Missouri & Kansas

AGGCORP

Powerscreen Central

14833 164th Ave. S.E, Big Lake, MN 55309

22800 Lakeland Blvd. Cleveland, OH 44132

9001 Hickman Mills Drive Kansas City, MO 64132

www.thecoinc.com

www.aggcorp.net

www.powerscreensales.com

763.263.0505

614.309.6854

816.718.9600 • 800.227.0534

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 11, 2021 • Page 45

Page 46 • December 11, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

2016 Eagle Crusher UltraMaxx Tracked Impactor Crusher, SR#31415, 1,727 Hours $289,000

CASECO Lube Service body removed from Peterbilt 337 Model, includes oil pumps, air compressor, & hydraulic pump $15,000

2021 Screencore 480 Tracked Stacker, SR#183, w/Mulch Auger, 14 Hrs CALL FOR PRICE

NEW 2021 Morbark 40/36 NCL Drum Chipper, SR#478-1252, 4 Hrs CALL FOR PRICE

5064 FE ATURES )HDWXUHV DQ HQFORVHG HQJLQH FRPSDU WPHQW /DUJH IHHG RSHQLQJ DQG LQFK KDPPHUPLOO ZLWK D VHOI FOHDQLQJ DLU LQWDNH V\VWHP 2VFLOODWLQJ VWDFNLQJ FRQYH\RU $YDLODEOH RQ &$7 7UDFN 6\VWHP RU DV D $OVR PDQXIDFWXUHV D ZLGH YDULHW \ RI TXDOLW \ ¿I WK ZKHHO WUDLOHU W X E J U L Q G H U V 7KUHH GLI IHUHQW OHYHO RSWLRQV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS N Z WR KS N Z

action

cts in View produ Tech D e on th ura l! channe

TOMRA Provides Solution to Sorting ‘Wood A’ From ‘Wood B’ TOMRA from page 40

TC-12 FE ATURES 7KLV SRZHU IXO FKLSSHU FDQ JULQG ORJV XS WR LQFKHV LQ GLDPHWHU DQG LV FRPSDFW VR LW FDQ EH HDVLO\ WRZHG WR D MRE VLWH KS N Z &$7 & GLHVHO HQJLQH 37 7HFK FOXWFK )HDWXUHV D VSULQJ ORDGHG IHHG ZKHHO ZLWK DGMXVWDEOH GRZQ SUHVVXUH

2SWLRQDO KHLJKW VHQVRU WKDW DXWRPDWLFDOO\ DGMXVWV WKH IHHG UROOHU WR PDWHULDO VL]H 2SWLRQDO K\GUDXOLF JDWKHULQJ ZLQFK ,QQRYDWLYH KRSSHU VDIHW \ OLJKW EDUV ZLWK HDV\ DQG LQVWDQW VKXW GRZQ $YDLODEOH ZLWK SLQWOH RU EDOO KLWFK

management industry. More than 7,400 systems have been installed in more than 100 countries worldwide. Responsible for developing the world’s first high capacity Near Infrared (NIR) sensor for waste sorting applications, TOMRA Recycling remains an industry pioneer with a dedication to extracting high purity fractions from waste streams that maximize both

yield and profits. TOMRA Recycling is part of TOMRA which also develops sensor-based systems for sorting, peeling and process analytics for the food, mining and other industries. TOMRA Recycling is owned by Norwegian company TOMRA Systems ASA. For more information, visit www.tomra.com/recycling. 

Swanston Equipment Companies www.swanston.com 3450 West Main Fargo, ND 58103 701-293-7325

3915 E Burdick Expy Minot, ND 58703 701-837-9901

w w w.duratechindustries.net The primary application for TOMRA Recycling’s new solution is sorting Wood A — non-processed wood — from Wood B — processed wood products such as MDF (medium-density fiberboard), HDF (high-density fiberboard), oriented strand board (OSB) and chipboard.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 11, 2021 • Page 47

573-635-8700 • 888-972-2537 • www.rackersequipment.com

FORCE MULTIPLIER

#154008 CEC portable wash plant with 6×16 3-deck incline screen and 36″x25′ single sandscrew. mounted on tandem axle chassis, very good condition.

#510122 Furukawa 1100ED self contained hydraulic rock drill 1321 hours on Cummins QSB6.7 engine & 490 hours on HD818 drifter. FOPS/ROPS cab w/ AC & heat. Auto-rod changer, auto-greaser, dust collector, & anti-jam. Set up for T-45 M/F rods. Includes rear/side view camera & rear bumper. Very good cond.

#161009 New Willis 36"x60' tube-type radial stacker. w/ 15hp Westinghouse motor, NBS #5 reducer, 4-ply belt, Superior 35 degree CEMA C 4" idlers w/ 4" CEMA C return idlers. Lagged head and wing-tip tail pulleys w/ Dodge bearings. Pintle hitch and pivoted mounting plate.

A new era is being ushered in with Rammer® fully investing in Allied® Construction Products to deliver enhanced products, service, and support the growing North American markets. The combined forces will be stronger than ever, bringing you the latest Rammer technology with Excellence and Performance Series breakers as well as our pioneering Ho-Pac and Skid-Pac compactor drivers.

#610125 John Deere 644K. rubber-tire loader w/ quick attach & 4yd 10′ wide GP bucket w/ bolton cutting edge (good to very good condition). 8105 overall hours on JD PowerTech 6068H engine. 23.5R25l3 tires approx 70% on front, 2030% on rear. Enclosed cab w/ AC & heat. Loader runs great, ready for daily use.

#154006 "New" Aggretek portable wash plant w/ 6x20 3-deck screen and twin 36"x25' sandscrews complete with electric motors, electric box and starters, wire cloth, and NiHard shoes, all on a 3-axle chassis.

#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.

Together, and stronger than ever, the world-famous Rammer and Allied continue to prove... there’s no match for experience and innovation.

800-321-1046 / www.alliedcp.com

EXPERIENCE & INNOVATION

HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391

#310002 Broderson 15-ton carry deck 4WD crane 45' main boom & 15' jib. GM V-6 gas/ propane hook block and anti-two block. On board computer w/ scales and tip read-out.

#650000 2011 John Deere 410J backhoe with 1442 hours. 4-in-1 bucket, pilot controls, AC/heat, radio, and quick attach bucket. Like new tires 21L-24-12.5/8-18

DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510116-Furukawa 15ED Hydraulic Rock Drill. Has twin Isuzu engines. 5667 hours on hydraulics, 4413 hours on compressor, and 5992 impact hours. Very good undercarriage. Enclosed cab w/ AC and heat. Dust collector, auto rod changer. Set up for T51 rod. Overall good condition. #510119 Furukawa HCR1500ED drill. approx 18,100 hours. 8.3 Cummins engine. Runs well, still in use. Well maintained. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.

#112046-Metso Nordberg LT1213S Loko Track mobile crushing & screening plant x47". 12 cubic yard hopper w/ vibrating grizzly feeder. Screening module is 2005. Conveyor width 47" & feed width 43". #111075 Portable Portec/Pioneer SM3042 jaw plant Cummins C-N14 engine (runs good), 42"x16' apron feeder (good flights), & 4x8 2-deck Mesabi w/ reversable 30" underconveyor, 36" undercrusher front delivery conveyor. All on a factory 3-axle chassis. Has onboard electric hydraulic pump & reservoir w/ controls to operate a 4-point hydraulic leveling system for fast set up with legs, onboard fuel tanks, operator platform & controls. Disassembled for transport, ready for work when re-assembled. Will need approx 100kw gen set for electric motors.

EARTHMOVING #410063-CAT D9H w/ EROPS cab w/ A/C, straight blade w/tilt. Single shank, 4-barrel ripper. 24" pads. U/C (overall approx 70%). Rebuilt engine, trans, FEEDERS and finals (HMR 2994) Left Trunnion is available but #132015-Continental Gin 48"x25.5' apron feeder. needs to be installed. Overall good condition. Large feed box. Flights are approx 80+%, good #410070-CAT D6R dozer with 10' straight blade sprocket, & jackshaft drive gears. 60hp motor and with good cutting edge. Has EROPS cab with air. gear box, but has removable mount (for transport). Glass all good. 22" single grouser pads, overall conHeavy duty apron feeder. Shipping dims: 8' 7" tall dition of undercarriage is 60%. Pins have tit on drive & 30' long. side. Has 4600 hrs. #131022 Hewitt Robbins 48"x20' vibrating grizzly #650001 Cat 416B 4WD backhoe with Extendo Hoe feeder (E-11 mechanism) with hopper. Good condi- 24" bucket w/ teeth. Enclosed ROPS ab w/ heat, no tion. air. Has 7374 hours. Has wobble stick controls. #640064 Cat 325C MH scrap excavator with 16,259 JAWS & IMPACTS overall hours and rebuilt 3126 engine. New #111072-Pioneer 3042 jaw on shop built 2 axle hydraulic magnet generator. UC approx 75%. Runs chassis with Cedarapids 42"x16' grizzly feeder, 41/2' great. grizzly bars, jaw dies 95% good, 42" underconveyor, WEG motor, 16' hopper, 3/4" thick hopper sides and SCREENS ends. Good condition. #141120-Nordberg 6x20 3-deck incline screen

#141154 Anaconda self-contained 4x10 2Deck track-mounted scalping screen w/ 3 hydraulic folding stockpile conveyors & JCB 444 EcoMAX 74HP engine (T4F). Flipdown hopper tailgate for direct feed. Variable speed for all belts. Max feed up to 16" & machine is rated up to 250HP.

with ball tray on bottom deck. No motor, but was a running take out. Good condition. #142003-Deister 5x16 2-deck horizontal, underslung screen with new bearings SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. #121053-Cedarapids 5040 Hammermill secondary crusher with 5x16 3-deck screen. Has rotovator, 36" return and 36" front discharge conveyors. All mounted on tandem axle chassis. Plant is all electric except the hammermill is diesel jack shaft driven. No power on mill. Power unit and control panel are available separately for $12,000. Engine runs, but needs to be rebuilt. #123025-Portable Telsmith 48" STD cone w/ 30" feed conveyor w/ 20 HP motor, Dodge TDT5 reducer, 36" undercrusher conveyor w/ WEG 20HP electric motor. Cone has 125HP 1150RPM motor, mounted on factory tandem axle chassis. Good brakes, very good rubber. Good running cone. #121058-Spokane model 74 vertical shaft impact crusher with stand and 250hp electric motor. Has 4shoe table and anvil ring with good shoes and near new anvils. #122002-Pioneer 4030 triple roll portable w/ 36″ feed conveyor, 4×10 Portec Pioneer scalping screen, 36″ discharge conveyor. Tires on chassis are good. No motor included for the rolls.

Jefferson City, MO 65110

Page 48 • December 11, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

NEW BL4/EX/VT LIMITLESS PRODUCTIVITY

fae-group.com

SAVVE MONEY M ANND TIME CRUSHER BUCKET The crusher buckets for skid steers and backhoe loaders. When installed on your machine, the unit crushes any type of inert material.

REDUCE >> REUSE >> RECYCLE See the whole product range on: MBCRUSHER.COM info@mbcrusher.com

WORLD OF CONCRETEE Sil er Lott Silv Booth S29967

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 49

GREAT HOLIDAY GIFTS! Barber-Greene BG-260C Paver, 1:50 scale - $195

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $225

Roadtec RX-700 Cold Planner, 1:50 scale - $175

Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160

Allis Chalmers TS300 Cable operated Motor Scraper, 1:50 scale - $110

Caterpillar 12G Motor Grader, 1:50 scale - $80

Caterpillar 769C Quarry Truck, $80

Hyundai Robex 290LC-3 Excavator, 1:50 scale - $75

Komatsu PC650 Hydraulic Shovel, $75

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $225

International TD-24 Crawler w/Cable Blade, 1:25 scale - $175

Cat D4, 2T Crawler w/Letourneau Push Blade & Hyster Winch, $235

Caterpillar 953 Track Loader, 1:50 scale - $130

Hitachi EH5000ac-3 Quarry Truck, 1:87 scale - $190

Bucyrus Erie 22-B Dragline, 1:50 scale - $290

Allis Chalmers Forty-Five Motor Grader, 1:50 scale - $110

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 50 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Midwest Alta Equipment altaequipment.com Bloomington, IL 309-808-6256 Orland Park, IL 708-349-8430 Ottawa, IL 815-324-6062 South Elgin, IL 630-883-3320 Spring Grove, IL 815-581-8064 Wauconda, IL 847-469-0120 Buck & Knobby Equip Co. buckandknobby.com Ottawa Lake, MI 734-856-2811 CSTK cstkequipment.com Kansas City, KS 888-566-5743 Diamond Equip diamondequipment.com Mt. Vernon, IL 618-242-2273 Evansville, IN 812-425-4428 Terre Haute, IN 812-299-4747 Bowling Green, KY 270-781-1061 Farm Depot farmdepot.biz Caro, MI 989-673-6172 Ionia, MI 616-522-5501 Schoolcraft, MI 269-679-3939 G W Van Keppel vankeppel.com St. Louis, MO 314-872-8440 Hardings Heavy Equip hardingsinc.com Lowell, IN 219.696.8911 Hayden Machinery LLC haydenmachineryllc.com Springfield, MO 417-855-7057

hceamericas.com

Highway Equip Co. highway-equipment.com Canton, OH 330-915-8391 J Gross Equip Inc. jgeinc.com Aberdeen, SD 605-229-4037 Midland Engine midlandengine.com Midland, MI 989-631-4608 Reco Equip, Inc. recoequip.com Columbus, OH 614-276-0001 Ft. Wayne, IN 260-255-3115 Monroe (Dayton Area), OH 513-539-5255 Perrysburg (Toledo Area), OH 419-874-6001 Richfield, OH 330-659-0800 Florence, KY 859-727-7970 Indianapolis, IN 317-781-8100 Rueter’s rueterco.com Council Bluffs, IA 712-366-5221 Grand Junction, IA 515-738-2571 Carroll, IA 712-792-9294 Elkhart, IA 515-367-3054 Osceola, IA 641-223-8171 Sioux City, IA 712-266-3832 Neligh, NE 402-917-5604

St. Joseph Equipment, Inc. stjosephequipment.com La Crosse, WI 608-788-1775 Eyota, MN 507-545-2000 Team Boone teamboone.net Bardstown, KY 502-369-2475 United Truck Sales (Compact Excavator Only)

utsmi.com Clinton Township, MI 586-630-0355 West River Equipment westriverequipment.com Mandan, ND 701-751-0995 Yes Equip & Services yesequipment.com Milwaukee, WI 414-263-9001 Madison, WI 608-243-9253

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 51

READY TO OUT-WEIGH THE COMPETITION

Hyundai wheel loaders come standard with an auto-weighing system that weighs accurately to within plus or minus 1%. With better payload management, you can operate more efficiently and maximize profitability.

hceamericas.com

Page 52 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Dealers, Contractors Gather for Cat’s Cold Planer Demo CAT from page 8

trol. The belt also reverses for faster clean-up, while magnetic vinyl covers provide quick access to inspect the rollers for wear. Optional dust ventilation and spray bar systems maximize dust removal. Longer lasting conveyor flashing, improved rotor drive access, corded pendant for the rotor turning device and an added wear shoe for the inboard ski are just a handful of the many improvements included in this product update. Cat milling machines are designed with long maintenance intervals, large service doors, and power hood for walk-in access to critical components and systems. Track pads are easy to replace, while track chains and other undercarriage components are maintenance-free up to 4,000 hours. When time to replace high wear components, Cat dealers provide specialized support with repair kits, convenient parts availability, and service options for both the machine and the engine.  With the Cat PM312 are Joey Fuller (L) of Gregory Poole and Chris Kibler of Carolina Sunrock in Butner, N.C.

David Fields (L) of Stowers Machinery goes over the 2D Grade Control system with Clayton Steels, Spears & Hopkins in Chattanooga, Tenn.

CEG

Steven Ryan (L) of Milton CAT goes over the benefits of the Cat PM312 with Jeff Hutchins of J. Hutchins Inc. in Richmond, Vt.

Caterpillar dealers and contractors from across the United States gathered in Clayton, N.C., to learn about the manufacturer’s line of cold planers.

Looking over a Cat 243D3 skid steer with a Cat BU118 broom attachment are Andy Brown (L) of Fred Smith Company in Raleigh, N.C., and Bryant Balentine of Gregory Poole.

Billy Martin of Talley Construction in Chattanooga, Tenn., checks out his latest investment, the Cat PM825.

SECTION

Attachments Pages 53-58

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Danuser Introduces Its New Post Driver, Stump Auger Danuser, a manufacturer of attachments for agricultural and construction equipment, is launching a new post driver and stump auger. Danuser Hornet Post Driver The Hornet is a quick and powerful post driver. The jack hammer style power cell offers a controlled, high-speed driving performance. With Danuser’s one-man grapple option, it is an all-inone driving solution. Two models are available: T7 • Drives T-posts up to a 7 in. diameter post/pipe • Impact rate: 500-900 blows/min. • Hydraulic requirements: 2,000-3,500 psi / 1030 gpm • Impact energy: 684 ft.-lbs

means no hammer and punch needed to change driving tools. The Hornet comes standard with a domed driving tool, but flat driving tools as well as a flat RR tie tool (T8-RR only) also can be purchased. An additional weight kit option allows operators to fine tune the weight of the driver to match the operating capacity of the vehicle. The kit includes 14 suitcase weights for a total of 616 lbs. of additional weight. The full kit can improve driving speed by up to 50 percent over the base unit. Other features include a post holder with tie-down locations for transporting posts/pipe; no setup required, it’s ready to go to work; and a one-year warranty.

Danuser Stump Auger The Stump Auger is a standard 2 in. hex auger attachment that planes away stumps without requiring large, specialized equipment. A threaded pilot digs into the stump and large cutting blades then shave the stump away. The large cutting blades are reversible for more cutting life. The stump auger is available in 10 in. and 16 in. diameters. The 10 in. can run on auger units with The Hornet post driver is available in two models: the T7 and the T8-RR. 1,700 ft.-lbs. or more of torque and the 16 in. can run on auger units with 3,000 ft.-lbs. or more of torque. Complete stump .T8-RR • Drives T-posts up to an 8 in. diameter post/pipe removal is achieved by overlapping planning locations. Features include: (can also drive RR ties with optional RR tie driving • 2 in. hex collar tool) • Hardened steel cutting blade: Reversible/indexable for • Impact rate: 400-800 blows/min • Hydraulic requirements: 2,200-3,500 psi / 13-30 more cutting per blade • Hardened steel pilot with cutting blades gpm • 10 in. and 16 in. diameter options — 10 in. for use with • Impact energy: 884 ft.-lbs. The hydraulic grapple option allows one person to 1,700 foot-pounds of torque and higher drive units; 16 in. for pick up, load and drive posts. The Hornet comes stan- use with 3,000 ft.-lbs. of torque and higher drive units • Weight: 10 in. – 50 lbs.; 16 in. – 70 lbs. The Stump Auger is a standard 2-in. hex auger attachment dard with a flow control valve that allows the driver to • Overall length: 27 in. for both sizes. that planes away stumps without requiring large, special- be run on machines with hydraulic flows up to 30 gpm. ized equipment. For more information, visit Danuser.com.  The toolless driving tool allows quick change, which

Page 54 • December 11, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Komatsu Expands Its Range of Hydraulic Breakers Used in a variety of rock and concrete demolition applications from scaling a tunnel, to running a pedestal-boom on a quarry, or tearing out reinforced concrete abutments, breakers are essential tools. Designed and tested for compatibility with Komatsu excavators from the PC210 up to the PC490, Komatsu’s new JMHB-V breaker series helps customers achieve excellent impact energy and performance in a variety of demolition applications, according to the manufacturer. High Productivity, Efficiency With minimal wasted energy and subsequent higher operating efficiency, Komatsu’s 100 percent hydraulic-fired Vseries breakers modulate their impact force and frequency with up to 16 working positions to match most application’s requirements. Designed to help maximize productivity while helping lower cost per ton, the breakers also are fitted with an innovative energy-saving recovery valve that recuperates energy to drive efficiency. Fully Variable Technology Depending on the application’s hardness, V-series breakers automatically select the best piston stroke length and speed. By adjusting to either hard material, with long

and powerful strokes, or to softer material, with shorter, faster strokes, the breakers can achieve high production output, with little wasted impact energy. Valuable Standard Features To help owners get more from their

investment, Komatsu’s V-series breakers have several valuable standard features, including automatic greasing, advanced blank firing protection, swivel hose couplings and heavy-duty housing. The shockdampening systems in the form of upper and lower suspensions help reduce the risk of

Depending on the application’s hardness, V-series breakers automatically select the best piston stroke length and speed. By adjusting to either hard material, with long and powerful strokes, or to softer material, with shorter, faster strokes, the breakers can achieve high production output, with little wasted impact energy.

cracking excavator booms and breaker housings, while the mounted standard automatic lubrication feature helps guard against contamination caused by dust and debris. Control Vibration, Noise For greater operator comfort, suspensions with rubber/poly components help absorb impact and reduce vibrations through the boom. The completely enclosed sounddampening housings reduce the amount of noise generated when compared to open style breakers, to offer customers a solution to addressing noise ordinances in urban applications. Equipped for Dependability To support regular maintenance of breakers, inspection kits are included with gauges to measure wear on all critical components. Additionally, these breakers are backed by the Komatsu North America Attachment Division, a dedicated hydraulic attachments sales and service team that supports Komatsu distributors. These specialists are factory-trained and experienced with installation, operation, service and rebuilds. For more information, visit www.komatsu.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 11, 2021 • Page 55

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engine eered and ® y that prov p vides safer and feature the Ultralo ok tooth system easier tooth repla acement. Combined with p premium m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

Ultra alok® Tooth o System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades es s™ Cutting Edgess and a Acce essories

General Equipment & Supplies, Inc. www.genequip.com 4300 Main Avenue Fargo, ND 58103 800-437-2924

www.esco.weir

816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399

East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080

Roland Machinery Co. www.rolandmachinery.com Escanaba, MI Columbia, MO 906/786-6920 573/814-0083 Bridgeton, MO Palmyra, MO 314/291-1330 573/769-2056 Cape Girardeau, MO DePere, WI 573/334-5252 920/532-0165

DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710

Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

Page 56 • December 11, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 11, 2021 • Page 57

Tigercat Releases E-Series 822 Feller Bunchers, Harvesters Tigercat has released the 822E series feller bunchers and harvesters with the latest features and upgrades. The 822E is the most compact track feller buncher and harvester platform in the Tigercat track carrier line-up. The powerful machine is versatile for challenging thinning and final felling applications. Strong lift capacity, tight-tuck ER boom geometry and compact tail-swing make the 822E the perfect choice for selective felling where minimal site impact is important, according to the company. The harvester configuration is available with a fixed or leveling undercarriage. High horsepower and harvester head optimized hydraulics provides responsive control, quick feed speed and powerful delimbing capability for high performance and productivity. The 822E series carriers can be equipped with the Tigercat FPT N67 Non-certified, Tier IVf or Stage V engine, producing 282 hp (210 kW). A redesigned engine enclosure pro-

vides improved roof access for clearing debris. A boom slider also reduces debris build-up in hard-to-reach areas. The clamshell-style enclosure and drop-down side platform allow easy access to all sides of the engine, valves and daily service points. A hot shutdown feature has been added, which allows the turbo to sufficiently cool before stopping the engine, for improved turbo life. A larger, spring-assisted pump cover improves service access to the hydraulic pump area. Hydraulic improvements include quicker anti-stall response, consistent anti-cavitation flow and improved heat rejection. The updated E-series cab includes a new parallel action air ride seat with integrated heating and cooling. The reclining seat is fully adjustable with seat angle and seat extension adjustment and the wider seat cushion and lumbar support provide operator comfort all day long. The full-length front window and narrow side posts give the operator an enhanced view of the tracks and surrounding area. The HVAC controls feature a new infinitely variable fan speed control, which can be adjusted on the control panel, or by the machine control system touchscreen. Additional features include an emergency stop button and multiple storage locations with nets to keep objects in place. For more information, visit www.tigercat.com. 

Strong lift capacity, tight-tuck ER boom geometry and compact tail-swing make the 822E the perfect choice for selective felling where minimal site impact is important, according to the company.

Page 58 • December 11, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Premier Manufacturer of Equipment Attachments from 2,500 lbs to 120,000 lbs EXCAVATORS • LOADERS DOZERS • SKID STEER LOADERS CTL’S • BACKHOE LOADERS

Buckets Grapples Compaction

Seppi M Introduces New Version of Its Combined Tiller: Starsoil With Powershift Combined tillers have long been highly appreciated in the forestry sector. One model in this field is the Starsoil by Seppi M. Due to its design, several different operations are possible using the one machine, specifically, stone crushing, wood mulching and soil tilling up to a depth of 40 cm. This translates into a broad range of applications in many sectors of the forestry and agricultural industry, and also in the construction of dirt roads and forest trails, according to the manufacturer. The model has been redesigned to better satisfy user needs. The entire transmission has been reinforced and is now designed for tractors up to 310 hp. Also, new technology comes into play, the 2SPEED-POWERSHIFT transmission. This allows the operator to switch from one rotor speed to another with the machine running. In slow gear, at approximately 500 rpm, the machine is suitable for all soil works and stone crushing, according to the manufacturer. In fast gear, at about 1500 rpm, it is suitable for surface mulching. Switching occurs through the tractor ISOBUS terminal. Even the temperatures are monitored by the control unit in order to promptly intervene in case of a malfunction in the cooling circuits. The counter is now incorporated in the standard supply, is used to monitor the operating costs. The external dimensions are an external width of 2.8 m with a working width of 2.5 m. A smaller version also is

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

Company Wrench www.companywrench.com 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-402-7297

The model recently was completely redesigned to better satisfy user needs.

Fecon Adds Midwestern Regional Sales Manager

PUT MORE ON THE GROUND WITH

Headquarters: 4805 Scooby Lane NW Carroll, OH 43112 740-654-5304 866-262-4181

available with external width of 2.55 m and a working width 2.25 m, which also is approved for road use. The hydraulically adjustable skids are a new feature, available on request. Using these, the working depth can be adjusted directly from the driving position, thus proving to be a very practical system, especially for mulching works requiring minimal contact with the ground, according to the manufacturer. Without these hydraulic guides, the working depth is adjusted using the traditional method, via the position of the support roller. For more information, visit www.seppi.com/en. 

1330 KY-151 Frankfort, KY 40601 502-699-2681 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

Fecon announced the addition of Dallas Zeller as a regional sales manager of the Midwest region. In his new role, Zeller will assist distributors and other sales channel partners in the states of North Dakota, South Dakota, Nebraska, Kansas, Colorado, Missouri, Iowa, Minnesota, Illinois and Wisconsin in the sales of all Fecon products, including Bull Hog mulching attachments, mulching tractors, forestry attachments, stump grinders and accessories. Zeller has extensive experience in equipment sales and service. He joins Fecon from Kirby-Smith Machinery. Zeller works from his Topeka, Kan., home office and may be reached at dzeller@fecon.com. “With extensive experience in construction equipment sales and service, Dallas is a valuable asset to both dealers and customers,” said Mark Middendorf, senior vice president of sales of Fecon. “We’re excited to have him join the Fecon team in this important and growing territory.” Established in 1992 near Cincinnati, Fecon manufactures the Bull Hog forestry mulcher. It also manufactures tracked carri-

Dallas Zeller

ers and tractors, as well as a full range of attachments and other equipment for vegetation management. Fecon’s products are sold through equipment dealers and distributors worldwide. For more information, call 513/696-4430, or visit Fecon.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 59

JohnDeere.com/Dozers

GET OUT IN FRONT OF IT. With the most horsepower in its class pushing an available 161-inch-wide blade, the 750L delivers GHDGOLQH FUXVKLQJ HI͐ FLHQF\ 1RW WR PHQWLRQ PRQH\ PDNLQJ DFFXUDF\ WKDQNV WR RSWLRQDO 6ORSH &RQWURO ZKLFK FDQ HDVLO\ EH XSJUDGHG WR RXU IXOO\ LQWHJUDWHG 6PDUW*UDGHʏ ' JUDGH FRQWURO V\VWHP +HQFH RSHUDWRUV FDQ KROG JUDGH ZLWK OHVV HIIRUW WKH MRE LV GRQH IDVWHU DQG \RX PRYH RQ WR WKH QH[W RQH 6R \RX FDQ PDNH WKH PRVW RI \RXU RSHUDWLRQ

mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700 Sparta,WI COMING SOON

MOST HP IN ITS CLASS

161" BLADE

GRADE-CONTROL OPTIONS

www.westsidetractorsales.com Lisle, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677

Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160

Page 60 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Iowa’s Cemen Tech Expands Production, Adds Staffing to Meet Growing Demand Iowa-based manufacturing company Cemen Tech is growing its production capabilities to meet the future. Cemen Tech has incorporated a second production shift and is increasing its staffing levels by more than 25 percent. When complete, a total team member count of 250 will be building the company’s volumetric mixing technology. Cemen Tech made the strategic move after its sixth consecutive year of double-digit sales growth — even during the pandemic. Connor Deering, Cemen Tech CEO said, “We’re at a pivotal moment in our company’s history. Construction contractors in a wide range of fields are looking for innovative ways to take more control of their scheduling and Several employees of Cemen Tech’s newly started second shift materials costs. And they’re telling us that they huddle for a quick meeting before starting production and assemsee volumetric concrete mixers as an effective bly of the company’s volumetric concrete mixing technology. way to do that.” Cemen Tech’s volumetric mixers enable contractors to For example, this fall Cemen Tech started covering 100 permix their concrete on the job site and to exact specifications cent of employees’ and families’ health insurance premiums. for the job at hand. This allows the contractors to be more In addition to hiring new staff, the company also is investing nimble — getting their concrete on their own timeline. It also nearly $3 million to upgrade facilities, equipment and technology. This will improve worker safety and execute a major allows them to reduce material waste and ultimately cost. The team at Cemen Tech is able to staff up quickly by expansion of its manufacturing facility to increase output. For more information, visit www.CemenTech.com.  being creative and meeting the needs of modern workers.

Kirby-Smith Hires Joel Cook as Executive Vice President, GM of Construction Group Kirby-Smith Machinery (KSM) continues to build its executive team with the addition of Joel Cook as its new executive vice president and general manager, construction group. Cook will be responsible for strategic direction, operational management and overall leadership of the heavy equipment distributor’s construction group, which includes a current territory with 12 physical locations throughout Oklahoma, Texas, Kansas and Missouri. “Joel is very humble, direct and talented in dealing with customers and team members alike,” said Jeff Weller, chief operating officer. “He is already an outstanding addition to KSM as our new EVP-GM, Construction Group, and we are excited for Joel, his wife Leslie and their family to call Oklahoma City home.” Cook comes to KSM with a diverse background that includes experience both within the heavy equipment industry and the areas surrounding it.

KOBELCO-USA.COM

Mid Country Machinery

Southeastern Equipment Co., Inc.

3478 5th Ave S Fort Dodge, IA 50501 800-206-5936

Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303

4734 Sergeant Road Waterloo, IA 50701 319-234-8710

1356 3rd Street Brilliant, OH 43913 740-598-3400

106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

1500 Industrial Parkway Brunswick, OH 44212 330-225-6511 6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479

DeForest, WI 608-222-9191

8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Eau Claire, WI 715-832-3443

404 Breaden Rd. Monroe, OH 45050 513-539-9214

De Pere, WI 920-338-5800 Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

He started his journey with CIT, building a career in customer-facing financing for heavy equipment and management of large dealer portfolios. In 2006, Cook joined Komatsu Equipment Company, a Komatsuowned dealership based in Salt Lake City, where he held several key positions over 14 years, most notably as executive vice president — mining, construction and rental sales. Before joining KSM, Cook most recently

served as president and CEO of Road Machinery, a Komatsu distributor in Phoenix. “I have always admired Mr. Kirby and the great organization he has built. It is an honor to now be part of it, and I look forward to helping in its continued growth and prosperity through customer and company focus,” Cook said. For more information, call 888/8610219 or visit kirby-smith.com. 

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 61

Dig More. BUILD MOR RE. DO MOR O E.

EXPECT MORE FROM YOUR EXCAV C VATO T R. Pbma ehZ]l h_ ihp^k% bg]nlmkr&e^Z]bg` _nê ^\hghfr Zg] ^q\enlbo^ _^Zmnk^l rhn phg m Ûg] anywhere else, KOBELCO excavators are made to get more done each day than you ever mahnàm ihllb[e^' Ienl% ma^r k^ Zee [Z\d^] [r ma^ l^kob\^ Zg] iZkml lniihkm h_ ma^ DH;>E<H ]^Ze^k g^mphkd' Oblbm rhnk eh\Ze ]^Ze^k mh Ûg] ma^ fh]ê maZm l kbàm _hk rhnk ch[ lbm^'

KOBELCO-USA.COM

21-KOBELCO 21 KOBELCO-0642 K 0642 2_N NewDea ewDealer er_Ad2 Ad2_RUN.indd RUN.indd 1

7/7/21 7/21 /21 21 3:17 PM

Company Wrench

Blue Ridge Tractor

Illinois Truck & Equipment Co.

1330 KY-151 Frankfort, KY 40601 502-699-2681 www.companywrench.com

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 62 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 63

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650

1st Choice Equipment LLC

ABC Equipment Rental & Sales

Southeastern Equipment Co., Inc.

www.1stchoiceequipment.com

www.abcequipment.com

www.southeasternequip.com

1555 Atlantic Drive West Chicago, IL 60185 630/510-6050

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

1305 Sentry Drive Waukesha, WI 53186 262/521-5802

38525 Chester Rd. Avon, OH 44011 440/934-7368

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

Alta Equipment Co. www.altaequipment.com 18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA

Central Power Systems & Services www.kubotacentral.com 1285 Acraway Street Garden City, KS 67846 620/765-3118

Page 64 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

INDOT Alleviates Bottlenecks With New Interchanges

INDOT photo

Right of Way acquisition began in 2019 and the $62.8 million contract was let to bid in May 2020. E&B Paving LLC, based in Anderson, Ind., is the general contractor, with subcontractor Fox Contractors Inc. performing the dirt work.

INDOT from page 1

the past decade, developers have added millions of square feet of industrial space and hundreds of thousands of square feet of retail along the Whitestown Parkway east of the southern I-65 interchange, according to the Indiana Business Journal. After conducting an interchange capacity analysis, INDOT held a public meeting in 2017 to discuss plans to accommodate traffic resulting from so much growth. Tanya Sumner, Whitestown director of public relations, reported that the audience was pleased about the proposed reconfiguration of Exit 133 at SR 247, which many feel is “badly needed” to prevent traffic backups. “Adding a stoplight at Indianapolis Road also is something residents have been asking for,” Sumner said, praising INDOT for “proactively planning for future growth and getting ahead of any potential traffic problems.” Whitestown Town Manager Jason Lawson told the Indiana Business Journal that he considers a brand-new interchange a game-changer for the community. Prep Work Right of Way acquisition began in 2019 and the $62.8 million contract was let to bid in May 2020. E&B Paving LLC, based in Anderson, Ind., is the general contractor, with subcontractor Fox Contractors Inc. performing the dirt work. Work on the two-year project began in July 2020. Completion is anticipated in August 2022. “When work started on this contract, there [were] still 13 parcels of real estate that [were] not cleared,” said Greg Hole, INDOT project engineer. “The contractor worked in available areas. As each parcel was cleared, utility relocation could begin.” The last parcel didn’t clear until June 2021. It was a hog confinement farm on the east side of I-65 at CR 550. “The pits under the barns were supposed to be empty,” Hole said. “We were hoping the pits were full of ground water, but we had it tested. It was manure. We had to pay to have the manure removed.” Barrier walls were erected and E&B Paving began making minor paving improvements along three-quarters of a mile near the I-65/I-865 interchange in July 2020. This new pavement is for minor ramp improvements on the existing northbound I-65 exit ramp to Whitestown Parkway and the existing southbound I-65 exit ramp to I-865. ‘Diamond in the Rough’ Both the new I-65/SR 267 interchange and the I-65/CR

INDOT photo

Both the new I-65/SR 267 interchange and the I-65/CR 550 interchange will be “Diverging Diamond Interchanges,” which INDOT expects to alleviate traffic bottlenecks.

550 interchange will be “Diverging Diamond Interchanges,” which INDOT expects to alleviate traffic bottlenecks. The interchange at CR 550 South is expected to reduce traffic on SR 267 and Whitestown Parkway by as much as 50 percent. The Clinton County Daily News describes a DDI as a type of interchange “in which the two directions of traffic on a non-highway road cross to the opposite side on both sides of a bridge.” It requires traffic on the highway overpass to briefly drive on the opposite side of the road than usual. As drivers enter a DDI, they cross over to the left side of the bridge, as directed by signals, signs and pavement markings. DDIs are said to be safer, more efficient and more cost-effective than traditional diamond interchanges. Calder explained that the new interchange at CR 550 will divert “a significant amount of traffic” from both the SR 267 interchange and the Whitestown Parkway interchange. “This diversion improves the operations of the corridor so much that a less expensive interchange at SR 267 can be constructed and still provide the desired level of service,” Calder said. Contract plans call for 600,000 cu. yds. of borrow to be placed for the new ramps and roadways, Hole stated. “Fox Contractors bought a 40-acre field just north of the project to acquire the borrow for the job,” he said. Approximately 150,000 tons of asphalt is being used on the project. It comes from the E&B Paving plant at Harding

Street. With as many as nine different operations going on at the job site at once, up to 75 workers are onsite at any time. Some of them are using as many as 32 dump trucks to haul 10 to 15 loads of borrow or asphalt each day, Hole calculates. In addition to asphalt, crews will be pouring concrete. They’re using a new concrete additive, E5, on all the bridge decks because it gives the concrete “better workability,” Hole explained. E5 Internal Cure is a concrete admixture that provides proven benefits during placement and in the overall quality of in-place concrete, according to the company. E5 chemically binds nan-silica in concrete at the initial reaction point — internally curing concrete. It produces a stronger, more durable concrete that resists chemical and physical attack. It also significantly reduces the carbon footprint of construction projects. Benefits include improved water retention, workability, pumpability and higher pozzolanic activity, which creates higher strength and reduced permeability. This alternate curing method is recommended for bridge decks, slab bridges and reinforced concrete bridge approaches. Hole said they will install monitoring equipment on the east MSW wall at CR 550. There also are three bridges included in the contract. The Etter Ditch bridge on Indianapolis Road has four piers with a total of 38 12-in. H piles driven to approximately 50 ft.; the new bridge on S.R. 267 over I-65 has three piers with a total of 34 12-in. H piles driven to 60 ft.; and the new bridge at C.R. 550 over I-65 has three piers with 92 12-in. H piles driven to 78 ft. Finances, Fickleness Calder said the project will be paid for with federal funding, but that’s only partly true. In 2017, reports the IBJ, Whitestown created a tax-increment financing district to pay off bonds that were sold to raise its $10 million portion of the $63 million interchange project. In addition, 50 percent of additional property tax revenue generated in the district during the next 10 years will go toward retiring those bonds. However it gets paid for, the I-65 interchange project is expected to launch extensive commercial development. Initial plans called for a mix of retail and industrial development, along with office and health care space, but COVID19 ended plans for several brick-and-mortar retail outlets. For example, IBJ reports that Indianapolis-based Gershman Partners canceled three-year-old plans to build a 1 million sq.-ft. shopping center northeast of the proposed CR South interchange that was rumored to have big-name retailers like Ikea. see INDOT page 76

Trucks & Trailers

SECTION

Pages 65-71

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Drivers Call Transporting Tree ‘Experience of a Lifetime’ (L-R) are Bill Brunk (driver), Rob Heskett (COO), Ryan Heskett (Rob’s son), Jerry Gardner (driver), Robert E. Lee (driver), Mike English (driver), John Schnell (driver), Terry Jefferson (driver), Joel Eggert (mechanic) and Jeremy Bellinger (driver), all of Systems Transport, the official U.S. Capitol Christmas Tree Tour carrier.

For six System Transport drivers, the opportunity to transport the 2021 U.S. Capitol Christmas Tree from the Mad River Ranger District of the Six Rivers National Forest in California to Washington, D.C., was an experience of a lifetime. “Christmas has always been such a special holiday to me and my family, so to spread the holiday cheer throughout the country was truly an honor,” said Jeremy Bellinger, who has driven 3 million miles over the course of his 21-year career with System Transport. “I’ve been involved in transporting equipment to British James Edward Mills photo Columbia for the 2010 Winter Olympics in Vancouver and Santa and Mrs. Claus stopped by Williamsport, Md., have hauled utility poles in response to wildfires in to get a peek at the tree.

ON THE JOB

EVERY DAY!

California, but being one of the drivers responsible for transporting the U.S. Capitol Christmas Tree is truly the highlight of my career.” System Transport, the official U.S Capitol Christmas Tree Tour carrier, selected driver Terry Jefferson and yard manager and former company driver Robert E. Lee to transport the special tree from the harvesting site through U.S. Forest Service roads. Other System Transport drivers, including Bellinger, Bill Brunk, Mike English and John Schnell Jr. (driver of James J. Williams Transport, a sister company of System Transport) split time hauling the 84-ft. White Fir U.S Capitol Christmas Tree from Northern see TREE page 66

Ove er a CENTUR U Y of bu uilding the h ver e y best heavy-dut y ttrailer a s for o yo our hauling needs!

www.rogerstraile ers.com m

or morre information or your clo osest dealer call : Truck & Trailer Section sponsored by Rogers Bros. Corp

80 00-441-9880

Page 66 • December 11, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Transporting Holiday Cheer: Drivers Recall Special Trip Dodge Ram Tough

James Edward Mills photo

Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

Gas-2500, Ready for Plow

2 Ram 5500 4x4 108 c/a. please call for spec

2020 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

The Springfield, Mo., stop included a visit from some reindeer. TREE from page 65

California to Washington D.C., in the company’s new Kenworth T680 Next Generation. The 2021 U.S. Capitol Christmas Tree Tour, which began Oct. 29 in Crescent City, Calif., featured 17 community celebration stops in towns, cities and national parks along the 3,300-mi. journey to Washington, D.C. The tree was delivered to the U.S. Capitol Building on Nov. 19. According to Schnell, who split time driving the Kenworth T680 Next Gen with fellow driver English from Sacramento to Tulsa, Okla., the holiday spirit was on full display at the tour stops during their leg of the tour. “The turnout at the tour stops, especially in small towns, was really something. To bring the holiday spirit to each of the stops and see so many people come out to participate in the celebrations was special,” said Schnell. “I’ve known about this tour for quite some time but never imagined I’d be one of the drivers involved. To have the opportunity to transport the Capitol Christmas Tree is something I’m proud of and is an experience I’ll always remember.” For System Transport’s drivers, the tour was the first time each got behind the wheel of Kenworth’s latest addition to its Class 8 lineup, the Kenworth T680 Next Gen. The T680 Next Gen is Kenworth’s most aerodynamic truck to date and features the new customizable 15-inch digital display, latest Kenworth SmartWheel, signature LED lighting, and additional advanced driver assistance systems. According to English, who drives a Kenworth T680 classic for System Transport, the technology inside the T680 Next Gen is what initially caught his attention when he stepped inside the cab for the

first time. “The new electronics, like the [Kenworth 15-inch] digital display, was something I grew fond of once I learned how to adjust the gauge settings to show the ones I wanted to appear on the screen,” said English. “The Next Gen offers a comfortable and enjoyable ride and is a step above the T680 that I drive regularly for System Transport.” With prior experience hauling windmill blades and utility poles for System Transport, the drivers were prepared heading into the U.S. Capitol Christmas Tree Tour to handle the challenges of hauling a more than 100-ft. long trailer. “It was difficult at times navigating some of the narrow streets along tour stops, but we all have plenty of experience hauling oversized equipment for System [Transport], so we were ready for it,” said Schnell. Bellinger, who drove the last day of the tour and was responsible for delivering the Christmas tree to the U.S. Capitol, said he worked out a deal with Brunk for the opportunity. Bellinger and Brunk were responsible for hauling the tree from the tour’s first stop in Crescent City to Sacramento and again from Tulsa to Washington, D.C. “I have some family in D.C., and planned on flying my family out from Washington [state] to see us deliver the tree to the Capitol, so I wanted to be the one behind the wheel when the tree arrived,” said Bellinger. “The deal was, if I got to drive the truck to the Capitol, Bill [Brunk] would drive the truck over the Golden Gate Bridge. It was a win-win. It was an incredible experience to be involved in this tour and celebrate the holiday season with my family at the end of it.” The U.S. Capitol Christmas Tree lighting ceremony will be held on the West Lawn of the U.S. Capitol Building on Dec. 1. For more information, visit www.kenworth.com. 

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change Jarret Petsch 952-469-7063 jpetsch@jeffbelzer.com

John Zadurski 952-469-6817 jzadurski@jeffbelzer.com

XL Specialized Side Dump Truck Trailer Arrives Ready to Work With safety at the forefront, the side dump features easy-to-use tub hooks on each side of the trailer.

The new XL side dump truck trailer offers a reliable dump solution on the job. The side dump is available in 2- (SD2-37) and 3-axle (SD3-37) designs. There are great financing offers with this trailer, including: • 2-year structural warranty • Option to lease and lease to own • In stock units with lease options starting at $1,200/month With safety at the forefront, the side dump features easy-to-use tub hooks on each side of the trailer. When one side is disengaged, the other side is automatically

engaged, ensuring the tub is always secure. The electric mesh tarp system also prevents the tub from dumping if it is covered. The side dump is equipped with a large tub. The SD2-37 offers a capacity at 23 cu. yds. water level and 33 cu. yds. strike-off. Operators also are able to haul additional material with a durable tub manufactured out of 1/4-inch AR450 steel. The crackresistant design is ready to be put to work with your next aggregate job. For more information, call 877/884-1097 or visit www.xlspecializedtrailer.com/. 

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • December 11, 2021 • Page 67

NO OT ALL T TRAILERS S ARE BU UILT THE E SAME SOM ME ARE STRO ONGER THAN N OTHERS

Our ttrrailers start out tough gh and stay tough so th heyy can safelyy haul yyour equipment q p day after t day, yearr after year. Learn more: towmaster ster.com/more .

Hyd Dump D Drop-De eck

Tilt-Deck

Lowboy

Hyd draulic Tail a

AMER RICA A’S ’S BEST B BUIL LT T TRAILE TRAILERS ERS FOR R PROFESSIONAL HAULER RS

M MORE MODELS • MORE OPTIONS PTIONS • MORE CHOICES

Call 800-462 2-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH

Farm-Rite Equipment Inc. www.farmriteequip.com Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857

St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085

Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672

Diamond Equipment, Inc. www.diamondequipment.com

McCann Industries, Inc.

Alta Equipment Company

www.McCannOnline.com

www.altaequipment.com

Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000

Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800

Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770

Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800

Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200

Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545

Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110

Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444

McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420

Marne 1064 Franklin Street Marne, MI 49435 616-371-7250

Bryon Center, MI 616-878-7450

Gaylord, MI 989-731-9988

New Hudson, MI 248-356-5200

Sterling Heights, MI 568-474-5063

Traverse City, MI 231-714-6210

Bloomington, IL 309-585-3800

Detroit, MI 313-394-1811

Spring Grove, IL 708-547-7300

Flint (Burton), MI 810-744-4840

Ottawa, IL 815-313-2070

Company Wrench www.companywrench.com

Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428

Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061

2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747

Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100

Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273

Ziegler CAT www.zieglercat.com 8000 County Road 101 East Shakopee, MN 55379 800-352-2812

1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002

13822 West Freeway Drive Columbus, MN 55038 866-982-5656

53 Harbor Drive Sioux City, IA 51111 800-342-1847

2225 255th Street St. Cloud, MN 56301 800-522-9469

4805 Scooby Lane Carroll, OH 43112 866-294-6103

16400 Brookpark Rd. Cleveland, OH 44135 866-294-6103

1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

920 Deneen Ave. Monroe (Cincinnati), OH 45050 866-294-6103

1330 KY-151 Frankfort, KY 40601 502-699-2681

Page 68 • December 11, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

New Heavy Duty Side Dump Trailer by Bauer Built Mfg. Now Exclusivley Available at Mid Country Machinery

BAUER SIDE DUMP FEATURES: • Hitch-style option: either AG (shown) or Gooseneck • 360-degree rollover hitch • Two trunnion pivot cylinders • Option to dump left or right side • Equal-displacement hydraulic suspension • All six hydraulic drum brakes

• Self-steer rear axle • Triple-axle design • Hydraulic jack • 40 ton/36 cubic yard capacity • 50k lb. rated hub and spindle (x6) • 750/45R26.5 floater tires

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • December 11, 2021 • Page 69

Pittsburg gh, PA Lancaste er, PA Hubbard d, OH Cincinna ati, OH

(412) 747-7777 7 (717) 569-4531 1 (330) 534-0082 2 (513) 874-4880 0

Daily RENT NTALS & Long-Term m LEASING ! (412) 747-7777 47-7777

New & Used Trailer Sales • Rental / Leasin ng • Financing • Service ce • Parts

2018 Fontaine 55H, 26' in Well. e Unit # 4432 2014 Fontaine LXT40, 34'-60'. Unit # 4770

2018 XL Specialized XL 110 HDGS, 55-Ton o , 26' in Well. e Unit # 4894

60--Ton Beam Qty 1 - Fontaine Magnitude gnitude 60 MBMD, 28' Beam, Modular Connection at Rear, Painted Red. COMIN NG IN DECEMBER

ip s Fl oxe ve B Ha Fl We &

FONTAIINE DOUBLE DR OP EX XTEND ABLES 55-Ton Extendable

Qty 6 – New Fontaine Workhorse o e 55LCC, 18” Deck Height, 26’ We ell, o/s Alum Wheelss, Rear Lift Axle, Some w/ Wheel Covers, Both Red d and Black. Q y 2 – New Fontaine Magnitud Qty g de 60LCC,, 18” Deck Height, 26’ We ell, o/s Alu um Wheels, Front Ramps, Rear Lift Axle, Blacck.

Qty 1 – New Fontaine Magnitude 55-To on Drop Side Rail, Rea ar Lift Axle, o/s Alum Wheels.

Qty 1 – Fontaine Magnitude 55MXT, 29' We ell Closed - 50' Open, Modular Connection at Rear ar. COMING IN DECEMBE ER

Qty 1 – New Fontaine EQI Hydraulic Spreader. Qty 3 – New Fontaine 55-To on Paver, 24’ Well, e Both Red and Black. Qty 3 – New Fontaine ne LXT-40, LXT53'-74'x102", 34' Well e - Closed, 60' We ell - O Open, 40-Ton, o Mechanical Detach.

New Manac c S-T-R-E-T --C-H Flatbeds

MATCHED MA TC CHED GROUP GROUP 2017 Towmaster o 55-Ton, o 25'7" in Well. e Unit # 4691

*30" Deck Heightt*

Qty 3 - 48’-80’x10 02”, Air Slider & Spring Slider. All with Winch i h Track r and Galvanized Winches. i 2008 Load King 40-To on Quad Axle Folding Neck, 21'4" in Well. e Unit # 4807 45-To on XL90SDE Single Drop Extendable, ble, 53'-76'4", 102" Wide, 11' To op Deck, Reinforced forr Flip Neck and Flip Axle.

Qty 18 - 2018 & 2019 9 Fontaine 48'x102" Steel Flats, Spring Slider, Winch Track. Unit #’s 5033-5050

EAGER BEAVER V TAGS Qty 18 – New 20XPT, 20-To on, 21' Flat Deck, Air Brakes with Spring Ramps (Qty 6 – with Hydraulic Ramps) Both Red and Black. Qty 6 – New 25XPL, 25-To on (Qty 2 – with Hydraulic Ramps) Both Red and Black.

Qty 4 - New Eage er Beaver Pavers, 35 GSL-PT Hydraulic Detacha able Lowboys, 35-To on, 24' Deck, Air Ride. Qty 1 - New 35 GS SL-BR, 35-To on, 24' Deck, Beaver Tail. a

2016 Fontaine 55-Ton o , 26' in Well e .

Unit# 4663

We Ren nt & Lease all type es of Hydraulic Det tachable’s, Drop-d decks, Flatbeds, Sliiding Axles, Extend dable (flatbeds & d double drops) Dry Freight Va ans and more!

Page 70 • December 11, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Isuzu Announces Production of Its 2022 F-Series Class 6, 7 Models Is Under Way

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060

The new F-Series is powered by the Cummins B6.7 diesel engine and offers models in both Class 6 and — new for Isuzu — Class 7.

Isuzu Commercial Truck of America Inc. announced that production of its highly anticipated 2022 F-Series trucks has begun. The new F-Series is powered by the Cummins B6.7 diesel engine and offers models in both Class 6 and — new for Isuzu — Class 7. The F-Series trucks are the first product to come to market from the Isuzu Cummins Powertrain Partnership (ICPP) between Isuzu Motors Limited and Cummins Inc. These FSeries trucks are being assembled in Charlotte, Mich. “The advanced, more powerful Cummins B6.7 engine will create new opportunities for our dealers,” said Shaun Skinner, president of Isuzu Commercial Truck of America “We now offer a complete range of Class 3 through 5 gasoline-powered models and Class 4 through 7 diesel-powered trucks, by far the widest range of low cab forward trucks in the marketplace.” Model Line-Up Three F-Series models are available: • Class 6 FTR: 25,950-lb. GVWR • Class 6 FVR Derate: 25,950-lb. GVWR • Class 7 FVR: 33,000-lb. GVWR F-Series Models: • Are available in eight wheelbases, from 152 to 248 in., accommodating bodies from 14 to 30 ft. in length • Can be equipped with air suspension • Offer a 50- or 100-gal. fuel tank based on wheelbase • Come in a Standard Cab configuration with three-across seating The low cab forward design’s longer cab-to-axle (CA) dimension provides Isuzu F-Series trucks more cargo capacity versus conventional cab with a comparable wheelbase. This gives customers more versatility with their body application choices to accommodate heavier or bulkier cargo loads, according to the manufacturer. The FTR also is available with optional low-profile tires. Powertrain Highlights Every 2022 Isuzu F-Series model is equipped with the most powerful version of the Cummins B6.7 Efficiency Series, This 6.7-L, inline six-cylinder diesel engine produces 260 hp and 660 lb.-ft. of torque. “The Cummins B6.7 has a legacy that goes back almost 40

years, so we’re excited to see it in the Isuzu F-Series,” said Rob Neitzke, executive director of Cummins on-highway OEM business. “It gives Class 6 and 7 truck buyers in the U.S. and Canadian markets new ways to experience the B6.7 with configurations that didn’t exist before today.” The Cummins B6.7 is mated to an automatic six-speed Allison RDS transmission (2550 Series with park pawl for FTR, 2500 Series with no park pawl for FVR). This robust powertrain is engineered to provide the optimum blend of power that drivers demand with the fuel economy and reliability that owners enjoy, the manufacturer said. Isuzu Difference As with all Isuzu trucks, the FTR and FVR offer enhanced maneuverability, visibility and comfort. Drivers will appreciate the 50-degree inner wheel cut that gives the Isuzu F-Series class-leading turning diameters between 43.7 ft. (for 152-in. wheelbase models) and 65-ft. (for models with the 248-in. wheelbase). Isuzu’s low cab forward design, along with new LED headlamps, will give drivers greater visibility than ever. And Isuzu’s rugged chassis and dependable Hexapod cab, together with the new Cummins/Allison powertrain, promise to maintain Isuzu’s long-standing reputation for low total cost of ownership. The 2022 Isuzu F-Series will be available at Isuzu’s network of more than 300 dealerships, located in all 50 states, beginning in November 2021. Isuzu Cummins Powertrain Partnership (ICPP) The combination of Isuzu’s medium-duty truck reputation and Cummins diesel engine expertise in the United States and Canada creates a competitive product. The F-Series trucks will meet customer demand for urban-friendly low cab forward trucks while giving Isuzu dealers and Cummins the opportunity to expand their customer bases. “Collaborations like the ICPP provide ways to make more efficient use of physical resources to better serve our customers’ needs,” Skinner said. “We anticipate continued growth in the medium-duty market, so the benefits from the ICPP come at a very opportune time for us, for our dealers, and for our customers.” For more information, call 866/441-9638 or visit www.isuzucv.com. 

56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700 455 West Ave. North West Salem, WI 54669 608-786-2644

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • December 11, 2021 • Page 71

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

(09 )0 -63+ 9(47: $ 56 :*9(705. $ 56 4(9905. :JHU 5V^ [V >H[JO =PKLV

-; 37 ^P[O (PY )P -VSK 9HTWZ

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551

3300 Ogden Ave. Lisle, IL 60532 630-355-7150

www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362

600 Walnut Ct Rockdale, IL 60436 815-730-9011

3021 South 460 East Lafayette, IN 47905 765-477-6933

3110 Prairie Rd. Rockford, IL 61102 815-961-3160

1095 N Curry Pike Bloomington, IN 47404 812-333-9677

25166 State Road 2 South Bend, IN 46619 574-232-1461

3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576

3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160

Page 72 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doosan’s New ‘Transparent Bucket’ System Offers Safety for Operators DOOSAN from page 14

DX50Z-7 Mini-Excavator Specs include: • Horsepower: 48.8 hp • Operating Weight: 12,121 lbs. • Maximum Digging Depth: 11 ft. 5 in. • Maximum Digging Reach (ground): 19 ft. • Maximum Loading Height: 12 ft. 6 in.

Doosan’s new DX350LC7 crawler excavator.

DL200-7 Wheel Loader Specs Include: • Horsepower: 142 hp • Operating Weight: 26,559 lbs. • Bucket Capacity, heaped: 2.6 cu. yds. • Static Tipping Load, full turn: 19,705 lbs. • Dump Height, 45 degrees: 9 ft. 1 in. • Dump Reach, 45 degrees: 3 ft. 4 in. DL220-7 Wheel Loader Specs include: Doosan’s DL250-7 wheel loader.

MINNESOTA ZIEGLER CAT

www.diamondequipment.com Mt. Vernon 618-242-2273

www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

INDIANA MACALLISTER MACHINERY SALES/RENTALS

DX140LCR-7 Crawler Excavator Specs include: • Horsepower: 115 hp • Operating Weight: 35,424 lbs. • Maximum Digging Depth: 19 ft. 8 in. • Maximum Digging Reach (ground): 28 ft. • Maximum Loading Height: 23 ft. 3 in. DX350LC-7 Crawler Excavator Specs include: • Horsepower: 286 hp • Operating Weight: 79,366 lbs. • Maximum Digging Depth: 24 ft. 9 in. • Maximum Digging Reach (ground): 36 ft. • Maximum Loading Height: 23 ft. 6 in.

ILLINOIS DIAMOND EQUIPMENT

• Horsepower: 160 hp • Operating Weight: 29,098 lbs. • Bucket Capacity, heaped: 3 cu. yds. • Static Tipping Load, full turn: 20,461 lbs. • Dump Height, 45 degrees: 9 ft. 3 in. • Dump Reach, 45 degrees: 3 ft. 6 in. DL250-7 Wheel Loader Specs include: • Horsepower: 172 hp • Operating Weight: 30,528 lbs. • Bucket Capacity, heaped: 3.3 cu. yds. • Static Tipping Load, full turn: 21,134 lbs. • Dump Height, 45 degrees: 9 ft. 2 in. • Dump Reach, 45 degrees: 3 ft. 6 in. 

www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 73

KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green 270-781-1061

OHIO CAT www.OhioCAT.com Richwood 888-446-4658

WILSON EQUIPMENT COMPANY www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

Page 74 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MADE FO OR

AMERIC CA

SERVICE THAT’S T

LOCAL L SCHEDULLE A DEMO O

TODAY Y WITH A LOCAL DEA ALER Compact Radius

sanyamerica.co om

SY155U

11745-R Lackland Road St. Louis, MO 63146 314-427-4911 www.cpower.com

16400 Brookpark Road Cleveland, OH 44135 440-439-4567 www.companywrench.com

2841 Verona Rd Verona, KY 41092 859-485-8500 www.newmantractor.com

3905 Country Rd WW Wausau, WI 54401 715-362-4977 www.scandforestry.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 75

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Roland Machinery Co.

Central Power Systems & Services

www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920

www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Liberal, KS (816) 781-8070 (620) 624-7274 ALP Air, Light, Power Salina, KS Liberty, MO (785) 825-8291 (816) 415-6700 Wichita, KS Joplin, MO (316) 789-7370 (417) 726-5373 Woodward, OK Maryland Heights, MO (580) 256-6014 (314) 427-4911 Yukon, OK Springfield, MO (405) 324-2330 (417) 865-0505 Tulsa, OK (918) 984-6565

MAKE POWER MOVES.

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

Page 76 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

GENERAL EQUIPMENT & SUPPLIES, INC.

INDOT Expects Commercial Development Around I-65 Corridor Near Whitestown INDOT from page 64 bound lane of I-65 at I-865 was Oct.15, 2020, and it finished Whitestown’s director of operations and economic devel- on time, Calder said. The completion date for an added lane opment, Nate Messer, believes it to be a temporary setback of northbound Whitestown Parkway exit ramp was Oct. 31, and expects investors to return to claim the prime real estate 2020 — also completed on time. A box culvert on Indianapolis Road was replaced with a bridge; it required with interstate access. 100 days of closure of the road. This He appears to be right, as Duke project was completed on time. Realty is forging ahead with industrial An intermediate completion date of developments in Whitestown and Nov. 15, 2021, has been delayed due Strategic Capital Partners, based in to ROW acquisition; the current comIndianapolis, has begun phase two pletion date is scheduled for Aug. 20, construction on an industrial ware2022. Calder thinks it may be possible house project that has already seen to make the CR 550 South interchange leases signed by Lowe’s and other operational before the reconstruction companies. With easy access to I-65, a of existing portions of the SR 267 major trade route connecting Chicago interchange are completed. with the Gulf of Mexico, the area is In order to keep to the schedule, the likely to attract more warehouses in INDOT photo the future, even if Whitestown offi- Work on the two-year project began contractor usually works weekdays cials would prefer a mix of businesses. in July 2020. Completion is anticipat- from 7 a.m. until 4 p.m., but Calder ed in August 2022. said that there has been some Saturday work. Detours, Dates “Any work that interferes with traffic on I-65 is being According to Calder, some of the SR 267 interchange work, the northern SR 267 bridge and the CR 550 South done at night, so there is occasionally some night work,” she interchange can be completed with minimal impact to traffic. said. Calder mentioned that community engagement about the Although there is no significant impact to traffic related to I65, there are detours related to local roadway realignments project, which began with that public meeting years ago, continues “as needed” with a supportive population eager to associated with Perry Worth Rd. and Albert White Drive. The scheduled completion date for an added travel south- see the results of this.  CEG

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 77

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

&RQQHFWHG WR \RXU VXFFHVV 1RZ \RX FDQ VWD\ FRQQHFWHG WR \RXU pHHW DQG \RXU EXVLQHVV q LQVWDQWO\ )URP D FHOO SKRQH ODSWRS WDEOHW VLPSO\ ORJ RQ WR 0\ .RPDWVX \RXU IUHH RQOLQH SRUWDO IRU UHPRWH pHHW PDQDJHPHQW SDUWV RUGHULQJ DQG WUDFNLQJ SDUWV DQG VHUYLFH QHZV DQG RWKHU UHDO WLPH FXVWRPL]HG LQIRUPDWLRQ P\NRPDWVX NRPDWVX

Page 78 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Family Fun Day, Food Drive Raise $4K for Local Food Bank

Takeuchi-US President Jeff Stewart presents a check to staff at the Banks Jackson Food Bank in Commerce, Ga.

On Nov. 12, Takeuchi-US employees, including President Jeff Stewart, presented the Banks Jackson Food Bank in Commerce, Ga., with enough food for 200 Thanksgiving dinners and an extra $2,550 to buy additional turkeys to feed even more needy families. This generous donation, worth a total of about $4,000, started out as a simple accompaniment to a fun company event and morphed into something far more meaningful. In October, Takeuchi hosted employees

and their families for Family Fun Day. Leading up to the event, Takeuchi had a food drive to collect both food and monetary donations for the Banks Jackson Food Bank. At Family Fun Day, approximately 200 adults and children enjoyed a pumpkin patch, food from local food trucks and numerous activities including bouncy houses, pumpkin painting, an egg race, a magician, corn hole games, a photobooth, a giant “Jenga” game and hayrack rides. One particularly popular event was “Meringue the Manager,” where employees paid money to

(L-R): Jason Menter, Cam Reiff, Angy Lamb, Elise McQuade, Carrie Stewart and Jeff Stewart with food donated by Takeuchi-US to help the Banks Jackson Food Bank of Commerce, Ga., provide 200 needy families with Thanksgiving meals.

throw whipped cream pies at their managers, raising an additional $600 for the food bank. Takeuchi then generously agreed to double whatever employees raised, which resulted in the total donation of 200 Thanksgiving dinners and $2,550 in additional funds. “We wanted to host Family Fun Day for our employees so that they could bond after a long year apart following the pandemic,”

said Stewart. “It was also a great way for us to come together and do something for our community. I’m proud of how our employees stepped up and raised a significant amount of money that will help local families enjoy Thanksgiving dinners that they wouldn’t have otherwise been able to afford.” For more information, visit www.takeuchi-us.com. 

CraneWorks to Acquire Midwest Crane Repair in St. Louis CraneWorks Inc. announced the acquisition of Midwest Crane Repair LLC. When the deal officially closes on Jan. 4, 2022, Midwest Crane Repair will be rebranded as CraneWorks St. Louis and become the company’s ninth nationwide location. Founded in 2002, CraneWorks consistently expanded its offerings and footprint in all things lifting. Midwest Crane Repair has operated in the St. Louis area since its founding in 2013 and quickly became known as the area’s de facto group to call for top tier crane technicians, the company said. This acquisition represents a big win for both companies’ customers in Missouri, Illinois and the surrounding areas. The agreement enhances CraneWorks’ ability to provide top notch support while expanding the footprint of its rapidly growing service and parts offerings. Midwest Crane Repair will retain its existing staff and management so its customers can continue receiving the same level of expertise and support that they’ve come to

expect, the companies said. “This acquisition represents our commitment to continue to provide best in class service in an expanded territory,” said Keith Ayers, CEO of CraneWorks. “For the past several years, we hired and trained some of the best crane technicians in the industry and quickly became known as the go-to provider when our customers need their equipment

back up and running. “The team at Midwest Crane Repair built a reputation in the region by performing top quality work with the sense of urgency that the crane market demands, making them a perfect fit for the CraneWorks team.” “At MCR, we have always tried to go the extra mile for our customers,” said Jon Henry, owner of Midwest Crane Repair.

“We understand that downtime at a job site can be costly, or worse, damage our relationship with one of our customers. Therefore, we take a personal approach and a vested interest in getting our customers’ equipment back up and running as soon as possible. “I see this same theory of operation at CraneWorks. Keith Ayers and David Collis have built a respected company through hard work and dedication to the industry. I could not envision a better fit for myself and my team at MCR than to be a part of the CraneWorks family. CraneWorks St. Louis will still provide best-inclass service to our customers in the Midwest, but we will now be able to offer considerably more. ‘We will have direct access to multiple crane manufacturer lines for new machines, rentals, parts and software. Additionally, our existing customers will be able to lean on the rest of the CraneWorks team in areas of the country where historically we were not able to provide service.” For more information, visit www.Crane-Works.com. 

Pages 79-85

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

DOT Officials Discuss Different Ice Melting Techniques By Ruksana Hussain CEG CORRESPONDENT

Municipal ice melting techniques are varied, and different regional and state departments of transportation have fine-tuned their approach to include a combination of methods and materials depending on the amount of ice and snow their areas experience every winter. Solutions have included using salt, brine, calcium chloride, magnesium chloride and a few other alternatives, along with sand application for traction. Salt has by far been the most used given its low cost and abundance, though the corrosion and contamination in the long term are cause for concern. But crews and technology have improved over the years to ensure effective results with lesser DSNY photo materials, better application using “We have 31 melters that we use during major storms, to melt snow in dense areas with narrow streets where piles of snow could the latest equipment and more envi- become a safety issue,” said Vincent Gragnani, press secretary, NYC Department of Sanitation (DSNY). ronmental awareness among teams. Where other materials might lead to lesser corrosion and contamination, the availability and cost effectiveness has been a matter of debate. Nonetheless, using methods such as pre-wetting, de-icing and antiicing alongside have helped DOT crews combat some of the most intense winter weather in recent years. “We have 31 melters that we use during major storms, to melt snow in dense areas with narrow streets where piles of snow could become a safety issue,” said Vincent Gragnani, press secretary, NYC Department of Sanitation (DSNY). “We work with the city’s Department of Environmental Protection to identify sewers that can accommodate large amounts of melted snow.” DSNY photo Ohio DOT photo DSNY clears snow and ice from New DSNY clears snow and ice from New York City’s more than 19,000 lane-mi. of road- Pre-treating with liquid deicers has York City’s more than 19,000 lane-mi. of ways and uses salt and brine to keep streets safer in winter storms. Salt spreaders been practiced at Ohio DOT for quite some time now. roadways and uses salt and brine to keep are the first line of defense and are used before a storm begins. streets safer in winter storms. Salt spreaders are the first line of defense, used before a tures dip below 24 F, the added calcium brine, which reduces the adhesion of snow mit, we pre-treat some roadways — storm begins. Spreaders are loaded with a chloride increases the salt’s effectiveness, and ice to the pavement, which can suppress entrances and exit ramps of major highways mix of rock salt and calcium chloride and even at low temperatures. Depending upon snowfall accumulation, increase the effec- and other challenging locations — up to 24 pre-positioned to begin spreading at the first conditions, some locations that are more tiveness of DSNY’s plowing operations and hours in advance of a snowstorm. We have sign of frozen precipitation. While rock salt prone to earlier freezing may be pre-treated. provide greater traction to motorists,” said an anti-icing fleet of 30 vehicles, as well as “In 2019, we piloted the use of liquid salt Gragnani. “When weather conditions perbegins to lose effectiveness once temperasee ICE page 80

Page 80 • December 11, 2021 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Ways to Keep Roads Free of Ice Varies From Region to Region ICE from page 79

seven brine storage tanks citywide, storing 9,800 gallons each, for a citywide total of 68,600 gallons.” Pre-treating with liquid deicers has been practiced at Ohio DOT for quite some time now, Matt Bruning, press secretary, ODOT Central Office, said. “We’re now increasing our application of liquid deicer on roadways during and after a snow event. The application rates can be as much at 80 gallons per lane mile, which is the equivalent of approximately 184 pounds of salt.” The advantage of using liquids is it works faster and does not have the “bounce and scatter” as with rock salt applications. There is little waste, which helps the environment while saving costs. “It also allows us to remove the snow and ice faster, thus reducing the number of cycles we have to travel,” said Bruning. “If we can keep the snow from bonding to the roadway, as soon as the snow stops falling and the winds are not blowing drifting snow, roads will be clear. The only drawback is maintaining a two-hour cycle time during the storm, which includes loading materials. If you cannot maintain the cycle time, you need to shorten your route distance or have a follow truck applying rock salt.” ODOT has found that using semi-tankers is one of the best practices for application. A case study in northwest Ohio showed an average cost savings of 27.2 percent and dramatic reduction in post-storm cleanup time. Pre-treating and de-icing also are common at Tennessee DOT. “Whenever a wintry precipitation storm event is forecasted and one inch or less of rain is predicted prior to the wintry precipitation falls, we pre-treat roadways using a 23.3 percent salt brine [mixed with 10 percent calcium chloride] spread at 35 to 40 gallons per lane mile,” said Beth Emmons, director of community relations division. “If there is one inch or greater rain forecasted, we will spread rock salt at a rate of 100 pounds per lane mile as a pre-treatment. During the storm event we continue to utilize the same brine mixture or spread rock salt at rates ranging from 250 to 400 pounds per lane mile depending on storm severity. Once temperatures drop below 25 degrees, we pre-wet the salt with calcium chloride at the spreader. Once a quarter-inch of wintry precipitation has accumulated on the roadway, we will plow to remove the precipitation by mechanical means.” While solid salt, liquid deicer, sand and snowplows are all used by Oregon DOT depending on the winter weather experienced, Katherine Benenati, assistant communications director said, the goal is to maximize safety while minimizing the environ-

North Dakota DOT photo

The North Dakota Department of Transportation is ready for winter with its spreaders and plow trucks prepared to battle the weather.

in winter conditions. It is used before and during a storm to prevent ice and snow from bonding to the pavement.” She added, “We use the lowest application rate at the right time and place to achieve the desired road conditions. To protect water quality, we only use deicers that meet strict quality specifications.” When deicers are not cost effective (dependent on a variety North Dakota DOT photo North Dakota DOT has added BEET 55 as part of of environmental and pavement its arsenal for snow and ice control, aside from variables), ODOT uses sanding salt and salt brine. BEET 55 is an agricultural material for better traction while product derived from sugar beets that is blended driving. “We use sand only when and with salt brine (80/20 ratio of salt brine to BEET 55). where appropriate," she said. “We try to avoid applying sand mental effects each of the different winter to bare pavement to avoid bounce and scattoolbox tools can cause. ter. We often pre-wet sanding material with “Liquid magnesium chloride with corro- liquid deicer to help it stay where we placed sion inhibitor has proven to be an effective it and we place barriers to capture scattered way to provide reasonably safe road surfaces sand along sensitive waterways.”

Some crews have experimented locally with agricultural byproducts as an effective solution that is inexpensive, environmentally safe and less corrosive in nature. For instance, North Dakota DOT has added BEET 55 as part of its arsenal for snow and ice control, aside from salt and salt brine. BEET 55 is an agricultural product derived from sugar beets that is blended with salt brine (80/20 ratio of salt brine to BEET 55). “We have been increasing our usage of liquids for snow and ice control,” said Barry Kinnischtzke, NDDOT maintenance division. “We have increased the amount of liquid storage and the number of tanks on snowplow trucks as a result. The pre-wetting of salt has been used to help prevent bounce and scatter of salt. Pre-wet salt activates quicker than dry salt. Slurry [super-saturated salt] also has been tried and used as a super wet de-icing material. We ensure that the correct amount of salt is applied to the roadway. We try to get no more and no less than the amount of salt needed to effectively treat the roadway and leave no residuals.”  CEG Ohio DOT photo

The Ohio DOT has found that using semi-tankers is one of the best practices for application. A case study in northwest Ohio showed an average cost savings of 27.2 percent and dramatic reduction in post-storm cleanup time.

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 11, 2021 • Page 81

SNO OW & ICE MANAGEMEN T MAN

PLOWS P SPREADERS S RVICE SE PARTS

weste erndealers.com | 877-888-9215

Page 82 • December 11, 2021 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

10 Indu ustry Le eading Models s Hydraulic & PTO Snow Blowers

1-800-446-8 222

•

S ales@Hitch hDoc.com

•

www .H HitchDoc.com

M A D E IN

USA

Bobcat Offers New Ultra-Durable, Redesigned Snowblower Bobcat Company has introduced an all-new, increase over previous designs. ultra-durable snowblower attachment that will The chute’s rounded intake provides a make quick work of even the most unrelenting smoother surface to roll the snow into the feed winter drifts. With an increased intake height and impeller, rather than pushing it. This design minibigger auger to draw more snow into the blower, mizes clogging and reduces resistance for operators will be able to clear more flakes in less improved snow flow through the attachment, and time. better productivity. The optional truck-loading “Our snowblower attachments easily become chute allows the operator to place snow high into an operator’s best friend during the winter — a truck and simplify hauling. High-flow models which for many areas of the country, can last up to capture extra available hydraulic horsepower several months,” said Kelly Humble, senior marfrom the carrier, which enables clearing through keting manager of product planning at Doosan the deepest drifts and heaviest snow while throwBobcat North America. ing it farther. “We’ve enhanced this latest model as the ultiAn additional feature includes easily adjustable mate snow-handling attachment, helping clear skid shoes, which are mounted to the sides of the snow faster and more efficiently, allowing operasnowblower, allowing operators to raise or lower tors to make fewer passes for quick area cleanthe clearing depth to match the surface of the job ing.” site. They not only make it easy to maintain Equipped with nine different width options and ground alignment, but they can also help guide numerous motor packages, the Bobcat snowblow- Bobcat's new snowblower attachment is powerful enough to break operators along curbs or walls — while preventer attachments provide owners with a perfect through ice buildup and eliminates chains, which can rust, loosen or ing contact with the snowblower itself. Designed match for their loader models, as well as for the break. The chute delivers 270 degrees of rotation for a wide range of for long-wear life and easily replaceable, the new application, from wide-open sites like driveways accurate snow placement possibility, which is a 15-degree increase over skid shoes provide long-wearing durability and and parking lots to narrow spaces like sidewalks. previous designs. superior control. The snowblower features an ultra-durable “We continue to enhance and expand our linedirect-drive, sprocket-style chute rotation, which improves wooded areas along a path. up of attachments to include additional, versatile solutions It is powerful enough to break through ice buildup and that increase the value, performance and capabilities of our the performance, durability and ease of maintenance. It enables operators to point snow in virtually any direction and eliminates chains, which can rust, loosen or break. The compact machines,” said Humble. place it wherever the job requires — even in hard-to-reach chute delivers 270 degrees of rotation for a wide range of For more information, visit www.bobcat.com/ places such as the middle of lawns, in ditches or inside accurate snow placement possibility, which is a 15-degree attachments/snowblower/features. 

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 11, 2021 • Page 83

29(5%8,/7 ()),&,(17 5(/,$%/(

7J T J U ZPVS M PD BM ,"(& EFBM FS G PS B EFNP OFX J O T ZT U FN BOE QBS U T

-D@Q M LNQ D @S ,"(&* //07"5* 0/ $0.

Burris Equipment 2216 N Greenbay Road Waukegan, IL 60087 847-336-1205 27939 W Concrete Drive Ingleside, IL 60041 815-363-4100 2001 Cherry Hill Road Joliet, IL 60433 815-464-6650 burrisequipment.com

Manke’s Outdoor Equipment 225 West Rose Street Owatonna, MN 55060 507-451-2327 mankeoutdoor.com

Tri-State Bobcat 1200 Highway 13 East Burnsville, MN 55337 952-894-0894 71 Minnesota Avenue Little Canada, MN 55117 651-407-3727 588 Outpost Circle Hudson, WI 54016 715-531-0801 Coming Soon! 2018 US Highway 8 St. Croix Falls, WI 54024 tristatebobcat.com

Page 84 • December 11, 2021 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

UNLOCK YOUR PARKING LOT CLEARING POWER With box plows, QuickCube® and EXT snowplows, BOSS has your parking lot solutions covered.

Buyers’ Municipal Flex Plow Ideal for Expressway, Urban Use

SKID STEER BOX PLOWS • Reduce Fuel Costs and Truck Wear and Tear • A Weather-Resistant, Stackable Design

• High-Efficiency Moldboard

• Expandable, Fully Hydraulic, Pitched-Forward Wings

• Bolt-On Wing Design

• SmartLight™ 3 LED Headlight System

• Load Simply and Easily • Transport Loaded Cubes Ahead of Time • Lightning Fast Response Time

• Reinforced Moldboard

• Corrosion-Resistant SmartShield ® Paint • Adjustable Heavy-Duty Trip Springs

• Heavy-Duty Push Frame and Push Frame Attachment Bar

Operators can “flex” the upper moldboard of the SnowDogg SuperFlex into various positions. This makes it ideal for both urban and expressway use.

Crysteel Truck Equipment 52248 Ember Road Lake Crystal, MN 56055 800-722-0588 507-726-2984 (FAX) 1130 73rd Avenue NE Fridley, MN 55432 800-795-1280 www.crysteeltruck.com

Northern Truck Equipment Corp. 47213 Schweigers Circle Sioux Falls, SD 57107 605-543-5206 605-543-5219 (FAX) 3505 Edwards Street Rapid City, SD 57703 605-341-8780 www.ntecorp.com

Versalift Midwest 51761 Danview Technology Court Shelby Charter Township, MI 48315 586-991-0054 586-991-0074 (FAX) midwest.versalift.com

Buyers Products’ municipal flex plow allows operators to “flex” the upper moldboard of the SnowDogg SuperFlex into various positions. This makes it ideal for both urban and expressway use.

invest in the ultra-specialized uni-directional plows. Either due to budget or convenience, they just want a high speed city/highway plow that can handle anything that’s thrown at it. Now we have the perfect solution for them.”

Transforming Blade Two hydraulically-operated pivoting ribs and a tubular pivoting upper crossmember transform the UHMW polyethylene moldboard on-the-fly to adapt to different plowing conditions. Operators can switch between standard, left and right discharges from the cabs of their vehicles. The blade curls down to fit under mailboxes or control light powdery snow, and it opens up to throw loads of heavy snow.

Superior Snow Scraping The SuperFlex features a 304 stainless steel lower moldboard skin with a 4- by 4by ¾-in. trip edge to protect the equipment from manholes and other hidden obstacles. An adjustable attack angle with a 5/8- by 8in. cutting edge gives operators precise control over how the plow scrapes the pavement.

Enhanced Maneuverability The SuperFlex features a fully boxed Aframe and 3-in. nitride outboard cylinders. This design keeps the plow close to the truck, which gives the plow a tighter turning radius so it can better navigate cramped city streets and other narrow spaces. It also reduces strain on the truck’s front axle to minimize vehicle wear and tear. A full-width 4-in. push frame provides rigidity for a sturdy, powerful push. “The SuperFlex is an extremely versatile addition to our line-up,” said Frank Dickinson, manager of municipal sales at Buyers. “Many municipalities don’t want to

Long Lasting Strength A telescoping 2-point level lift comes standard, as does a 2-1/2-in. king pin with a manganese bronze bushing and grease fitting for easy maintenance. A versatile swivel plate attachment allows municipalities to hitch the plow to a variety of trucks. Optional SnowDogg Illuminator LED plow lights provide bright, long-lasting light with heated lenses that prevent frost buildup. Other optional accessories include illuminated LED sight guides, cast plow shoes, and bolt-on casters. For more information, visit www.buyersproducts.com. 

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 11, 2021 • Page 85

2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075 2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 truckutilities.com

99 W Beltline HWY Madison, WI 53713 608-255-9675 worktruckstuff.com

1660 US Hwy 8 Barron, WI 54812 715-537-3259 dsrsales.com

611 Terminal Road Lansing, MI 48906 517-321-3800 kctruckequipment.com

1224 Ft. Jefferson Rd. Greenville, OH 45331 937-548-2216 mrplowsnowequipment.com

387 612: ,1 ,76 3/$&( www.hiniker.com

25112 22nd Avenue Saint Cloud, MN 56301 320-251-7252 4821 Mustang Circle Mounds View, MN 55112 877-485-9595 northcentralinc.com

Page 86 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Caterpillar’s PM312, PM622, PM825 On Stage at N.C. Event CAT from page 52

The Cat PM825 is a high-production, half-lane milling machine with a cutting width of 98.6 in. (2,505 mm) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

Going over a few of the details of the PM622 are Jeff Baynard (L) of Wyoming Machinery in Cheyenne, Wyo., and Parnell Ellingson of Simon Contractors, also from Cheyenne.

Josh Crank (L) and Todd Pollock, both of Sitech Precision in Raleigh, N.C.

Travis McClung (L) of Caterpillar goes over the PM825’s ease of operation with Joe Neilso of B. Jackson Construction in West Jordan, Utah.

Dale Arnold (L) of Cashman Equipment Company in Las Vegas and Bryan Corsetti of VT Construction in Las Vegas both enjoyed attending the event.

The event included presentations on the benefits of Cat products.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 87

Page 88 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

2019 Hitachi ZW120-6, Enclosed ROPS, 4WD, 101 hp Deutz, JRB 416 coupler, 2.0 cy Performance GP Bkt.,714 hrs. ....................................................$88,500 24-25 JM Call Steve 262-373-2151

2021 Takeuchi TB235-2, Enclosed ROPS, Cab with heat and A/C, 24 hp Yanmar diesel, Hydraulic thumb, 156 hrs.............................................................$51,370 24-25 JM Call Steve 262-373-2151

2018 Carlson CP130, s/n 109DB8P, 520 Hours, Contractor deluxe package.......................$179,900 25 JM call Steve @ 630-878-8765

2017 New Holland C232, 2 Speed, Open ROPS, EH Controls, Block Heater, Turn Signals, 78” Low Profile Bucket with Bolt on Edge 25 JM kwietbrock@ronsonequipment.com

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing 25-26 EB Call 866-294-6103

2012 Cimline 150 crack sealer, w/ heated hose, 2016 Volvo DD120B roller, 78” wide drums, 148HP diesel burner, 2000 hours. #8557....................$19,750 engine, 1125 hours, #7768..............................$95,000 800-283-1336 800-283-1336 25 JM 25 JM

1994 Blaw Knox PF150 8’ Paver with Deutz Diesel Engine, 8’ screed with hydraulic strike offs, approximately 2,900 hrs use..............................$15,000 as is 25 JM 800-283-1336

2017 DD120C, w/Intelligent Compaction and Pass Counting, #7540 ................................................$97,000 800-283-1336 25 JM

2015 Grove GHC 55 Tele Crawler, 55 Ton, 100’ Main Boom + jib Aux Hoist, Certified 2500 Hrs, original owner, Cleveland, Ohio.......................................CALL Call Andy Forepaugh 216-316-1511 25-26 EB

2007 Hyundai R320LC-7A, 0% for 36 Mos Available, Heat, AC, 13’3” Arm, 36” Grouser Pads, Pattern Changer, Add’l Cntrwht, Cummins QSC Dsl Eng, 54” Digging Bkt, 39’2” Digging Reach, 3185 Hrs ....$95,000 25 JM Call George 219-696-8911

2015 Link-Belt 210 x 3, Enclosed ROPS, Cab w/ heat and A/C, Manual Thumb, 160 hp T4i Isuzu diesel, 4,392 hrs..........................................................$94,000 24-25 JM Call Steve 262-373-2151

1999 Ingersoll Rand DD90HF, 6352 Hrs, Double Drum Roller, High Frequency, 66” Drum Width ........ .....................................................................$14,500 25 JM Call Steve @ 630-878-8765

2021 New Holland L320, Enclosed ROPS, Cab with heat and A/C, 67 hp FT4 diesel, 98 hours ......$44,240 Call Steve 262-373-2151

24-25 JM

2014 Manitowoc 8000 80 Ton Crawler, Request Boom Jib Combination Certified, Cleveland, Ohio ........ ............................................................................CALL Call Andy Forepaugh 216-316-1511 25-26 EB

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

Here's how the BARGAIN ADS Work: • • • •

Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. Either email your copy & photo to: production@cegltd.com, or mail to:Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. Cost is $135 per ad, $60 additional for color. Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 89

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings

on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted

WANTED (US): CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR EXCAVATORS, ALL MODELS; LOOKING FOR SEVERAL CAT 330DL, 336DL, 336EL EXCAVATORS UNDER 10,000 HOURS AND WHOLESALE PRICED. EMAIL: LJEQUIPMENT3@GMAIL.COM; PHONE: 1-3309873508 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; LOOKING FOR OLDER HITACHI EXCAVATORS AND CAT WHEEL LOADERS, IN GOOD RUNNING CONDITION OR NON-RUNNING MACHINES. EMAIL US TO DISCUSS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI EX 400 AND 450 SIZES EXCAVATORS. EMAIL: IUKANDCO@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CAT WHEEL LOADERS - WE NEED CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS HITACHI EXCAVATORS – WE NEED TO BUY HITACHI EXCAVATORS ZX 200-1, ZX 330, ZX 450, ZX 650, ZX 850 EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. ALSO KOMATSU EXCAVATORS PC400, KOMATSU PC 450-6, KOMATSU PC 7506. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW, THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING TO BUY THESE MODELS OF USED CATERPILLAR WHEEL LOADER 950B, 950E, 966E, 966F ,966F-II. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA-600-3, WA-600-6, WA-30, WA-40, WA 50. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE INTERESTED IN BUYING JOHN DEERE EXCAVATORS 790, 495 & 595 AND HITACHI EXCAVATORS EX 270-1, EX 270-5, EX 300-1, EX 400-1 AND EX 450-5. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE INTERESTED TO BUY CAT USED WHEEL LOADER 916, 926, 936, 950B/E, 966E/D/F, 970F, 980C, 980F. IF AVAILABLE PLEASE EMAIL US: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR MOTOR GRADERS - WE ARE INTERESTED TO BUY CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET ME KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 ––––––––––––––––––––––––––––––––

WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE.. MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VWERIZON.NETR; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 –––––––––––––––––––––––––––––––– WANTED (WV): NELSON 6000 WELDERS - LOOKING FOR NELSON DUAL GUN SYSTEM WITH GEN SET AND TRAILER, AND/OR PRO-WELD DUAL GUN ARC 3000 MACHINE. EMAIL: WEH@ TRIANGLEINCORPORATED.COM; PHONE: 304-562-6282 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CHALLENGER 85C TRACTORS - I AM IN NEED OF A USED SET OF TRACKS FOR ANY OF THE CAT CHALLENGER 65, 75 OR 85C. EMAIL: PI2279@YAHOO.COM; PHONE: 319-470-8388 ––––––––––––––––––––––––––––––––

WANTED (MA): ALL MODELS CATERPILLAR EXCAVATORS - LOWER SUPPORT RAIL GOES FRONT TO BACK RIGHT SIDE AND TOOL BOX RH SIDE LOWER RAIL THAT GOES FRONT TO BACK SUPPORTING TOOL BOX. EMAIL: BILLD@TDICENZO.COM; PHONE: 207-214-9610 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS, MODEL 580SK, 580L, 580LII, 580SL, 580SLII, 580M, 580MII, 580MIII 580SMII, 580SMIII, 580SMIII EMAIL: FRANKHORAN@GROFFTRACTOR.COM; PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY USED HITACHI EXCAVATORS EX200LC, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODELS. I NEED TO BUY CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET ––––––––––––––––––––––––––––––––

WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S-3 OFF-HIGHWAY TRUCKS LOOKING FOR REAR END DIFFERENTIAL FOR 30 TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 ––––––––––––––––––––––––––––––––

Page 90 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

BAR NONE AUCTION www.barnoneauction.com 866-372-1700

Coming Auctions

JOEY MARTIN AUCTIONEERS ROLLER AUCTIONEERS www.joeymartinauctioneers.com www.rollerauction.com 864-940-4800 866-515-1668 • Carrollton, GA • Sacramento, CA • Online • Online Timed Wed., December 15, 2022 Sat., December 11, 2021 To view information on upcoming auctions visit our Begins Closing January 19, December 10 - 21, 2021 For: West Georgia Heavy For: Live & Online Monthly Auction Calendar at www.constructionequipmentguide.com For: Equipment All Over 2022 Equipment Auction Public Auction Pennsylvania For: Construction & Contracting • Woodburn, OR HUNYADY AUCTION COMPANY DUNN DEAL AUCTION CO. Equipment Auction • Las Vegas, NV Fri., December 17, 21 www.hunyady.com www.dunndealauctions.net LlOYD MEEKINS Sat., December 11, 2021 For: Live & Online Monthly 800-233-6898 For: Late Model Boom Lifts, & SONS 614-946-6853 Public Auction Aerial Lifts and more AUCTION CO. RTI AUCTIONS • Virtual Live • Stoutsville, OH www.meekinsauction.com www.teitsworth.com • Fredericksburg, VA Wed., January 22, 2022 Sat., December 11, 2021 Tues., December 14, 2021 585-243-1563 For: Nestlerode Contracting Co., 910-739-0547 BASINGER AUCTION SERVICE LTD For: 2021 Winter Columbus For: Job Completion, • Lumberton, NC Inc. Surplus Liquidation basauctions.com Heavy Equipment, Truck & • Timed Auction Construction, Utility Equipment Tues., December 28, 2021 330-330-8949 and more Trailer Auction For: 27th Annual Construction – December 8 - 14, 2021 For: December NetAuction 2021 • Online I.R.A.Y. AUCTION Truck Auction • Online Ends December 15, 2021 Thurs., December 16, 2021 www.iraymn.com For: Youngstown City Auction of FREY & SONS, INC. For: Late Model Equipment & 320-968-7230 PURPLE WAVE AUCTION more Surplus Vehicles & Equipment www.freyandsons.com STEFFES GROUP INC. • Online Only www.purplewave.com 419-455-3739 www.steffesgroup.com • State College, PA Wed., January 12, 2022 866-608-9283 701-237-9173 Fri., December 17, 2021 For: Heavy Equipment, Semi, • Holland, OH For: Retirement Auction – Well B.I.C. AUCTIONS INC. • Online Truck, Trailer Consignment • Timed Online Thurs., December 16, 2021 www.bicauctions.com Maintained Construction Tues., December 14, 2021 Auction December 6 - 16, 2021 For: Absolute Auction 319-385-3399 Equipment & more For: Government Auction For: AgIron Litchfield Event • Live Online • Atlantic City, NJ • Online December 15 – 16, 2021 Sat., December 18, 2021 • Timed Online IRON AUCTION GROUP Wed., December 15, 2021 HANSEN AUCTION GROUP For: Late Model Construction For: Two Day Hoette Concrete www.ironauctiongroup.com For: Schreck Farms Retirement December 8 – 15, 2021 & PIKE AUCTION Equipment & more & Construction Auction 864-546-1216 Auction For: Steffes Construction www.hansenauctiongroup.com • Greenwich (Albany), NY Consignment Auction • Midland, NC 763-389-5700 Wed., December 29, 2021 Tues., December 14, 2021 BIDADOO AUCTIONS • Timed Online For: Very Late Model • Online • Online For: Unreserved Contractors Construction Equipment & more www.bidadoo.com Wed., December 15, 2021 December 14 - 21, 2021 Ends December 13, 2021 Fleet Reduction Auction 1-877-BIDADOO For: Vehicle & Equipment For: Steffes Truck & • Bushnell, FL For: Heavy Equipment, Truck, Auction February 5 - 13, 2022 • Online Transportation Auction Trailer & Farm Equipment For: Annual Florida Auction December 14, 2021 • Online J.J. KANE AUCTIONEERS • Timed Online Thurs., December 16, 2021 www.jjkane.com • Online December 14 - 21, 2021 For: Construction Equipment 855-GO2-KANE December 21, 2021 HANSEN AUCTION GROUP RITCHIE BROS. For: Multi-Party Construction Auction AUCTIONEERS www.hansenauctiongroup.com • Timed Online Equipment Auction • Online www.rbauction.com • Online 920-383-1012 Tues., December 14, 2021 December 28, 2021 402-421-3631 • Mt. Pleasant, IA Thurs., December 16, 2021 For: Public Auction • Online • Online For: Hardberger & Smylie December 16, 2021 All our auctions are • Timed Online January 4, 2022 Ends December 20, 2021 Retirement Auction For: AgIron Mt. Pleasant Event now online bidding only! Thurs, December 16, 2021 For: River Valley Custom • Online Montreal, QC Concrete Equipment Liquidation For: First Capital Auction Mon., December 27, 2021 December 14 - 15, 2021 BIG IRON AUCTIONS For: Sharpe Rentals Equipment VANTAGE AUCTIONS • Online • Online www.bigiron.com • Northeast Regional Event Auction www.vantageauctions.com Thurs, December 16, 2021 800-937-3558 Ends December 20, 2021 December 14 - 16, 2021 For: Surplus & Forfeiture 951-228-9040 • Online For: Construction, Heavy • Chehalis, WA • Online Auction Tues., December 28, 2021 Equipment, Farm, Trucks, • Lake Elsinore, CA December 15, 2021 December 15, 2021 For: Great Plains Kubota • Timed Online Trailers and More Sat., January 22, 2022 • Great Lakes Regional Event • Online Equipment Auction Tues, December 21, 2021 For: Heavy Construction December 16 - 17, 2021 • Online December 22, 2021 For: Public Auction • Online Equipment & more Ends December 20, 2021 • Truro, NS Tues., December 28, 2021 • Online December 17, 2021 For: Dairyland Power For: Vehicle & Equipment December 29, 2021 JEFF MARTIN Cooperative Warehouse Auction • Chehalis, WA WSM AUCTIONEERS • Online AUCTIONEERS, INC. December 21, 2021 Inventory • Online www.wsmauctioneers.com January 5, 2022 www.jeffmartinauctioneers.com • Houston, TX Wed., December 29, 2021 623-936-3300 601-450-6200 February 15 – 16, 2022 For: Ag Equipment Auction HENDERSON AUCTIONS • Virtual Online • Glencoe, MN DAVIS AUCTIONS, INC. • Orlando, FL • Online www.hendersonauctions.com Sat., December 11, 2021 Sat., December 11, 2021 www.davisauctionsinc.com February 21 - 26, 2022 Wed., December 29, 2021 225-686-2252 For: Public Auction For: Fleet & Government 203-758-4087 For: Annual Florida Auction For: Truck & Trailer Auction Services Live & Online • Prospect, CT • Virtual Online • Jacksonville, FL • Online Sat., December 11, 2021 • Glencoe, MN Sat., January 8, 2022 Wed., December 15, 2021 Thurs., December 30, 2021 AUCTIONS INTERNATIONAL For: Public Auction For: Public Contractor’s Auction Wed., December 15, 2021 For: Construction Equipment www.auctionsinternational.com For: Construction Auction For: Dec 2021 Tools & Business Auction 800-536-1401 Equipment Auction • Online DON SMOCK YODER & FREY HESS AUCTIONEERS December 6 – 12, 2021 • Biloxi, MS AUCTION CO., INC. RES AUCTION SERVICES HEAVY EQUIPMENT AUCTIONS www.hessauctioneers.net Fri., December 17, 2021 • Online www.dsa-auctions.com www.RES.bid www.yoderandfrey.com 866-511-2493 For: One Owner Absolute December 13 - 19, 2021 765-778-9277 833-SOLD-RES 419-865-3990 Auction • Marietta, PA • Online • Franklin, IN • Wooster, OH December 20 - 26, 2021 • Kissimmee, FL Fri., February 11, 2022 • Kissimmee, FL Fri., December 17, 2021 Sat., December 11, 2021 For: Truck, Trailer & Equipment February 14 - 16, 2022 February 16 – 19, 2022 For: Absolute Equipment For: Construction & Ag • Online For: Annual Florida Auction Dec.27 – Jan. 2, 2022 Auction For: Annual Florida Auction Auction Equipment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 91

Page 92 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Group Calls Infrastructure Act ‘Generational Improvement’ INFRASTRUCTURE from page 22

country, not themselves,” said Spear. “From farmers to truckers, the millions of hard-working people who make this country great won today.” He said that ATA members can finally see the fruits of their labor in the form of a 38-percent increase in road and bridge funding and an infusion of talent in the trucking sector’s workforce. “Those lawmakers who put their constituents before themselves have now cemented a lasting legacy that the American people will see, feel and use for many decades to come,” added Spear. The types of projects pursued, and the programs channeling resources to projects, will dictate the pace at which funds reach their targets, noted Brookings. State-of-good-repair projects obviously happen faster than new system expansions. “Funding in existing federal programs, including those distributed by formula, also tends to move faster than funding in new competitive grant programs, which involve new rulemaking,” wrote the think-tank. American Public Works Association (APWA) representatives also witnessed President Biden sign the IIJA into law. Like other industry leaders, APWA CEO Scott Grayson stressed how hard association members worked to see the act become reality. “From roads and bridges to better protecting communities against natural disasters to modernizing our water infrastructure network, this new law will deliver significant upgrades in every state and benefit every person,” he said. “The commitment of $550 billion in new federal spending over five years represents a generational improvement that still recognizes the need for local decision-making.” An Enormous Undertaking The American Association of State Highway and Transportation Officials (AASHTO) listed six priorities the Biden administration expects to follow during the legislation’s implementation: • Invest public dollars efficiently, avoid waste and focus on measurable outcomes for the American people; • Buy American and increase the competitiveness of the U.S. economy, especially via “Made-in-America” purchasing requirements, while also bolstering domestic manufacturing and manufacturing supply chains; • Create good-paying job opportunities for Americans by focusing on prevailing wages and the free and fair chance to join a union; • Invest public dollars equitably, including through the “Justice40 Initiative,” which seeks to make 40 percent of the overall benefits from federal investments in climate and clean energy flow to disadvantaged communities; • Build resilient infrastructure that can withstand the impacts of climate change and helps combat the climate crisis; and • Effectively coordinate with state, local, tribal and territorial governments in implementing IIJA’s critical investments. According to AASHTO, USDOT Secretary Pete Buttigieg said the 24 projects that received $905 million via the Infrastructure for Rebuilding America discretionary grant program are the types of projects his agency aims to support through the IIJA. Projects slated to receive $1 billion worth of fiscal year 2021 discretionary grants via the new Rebuilding American

In the IIJA, Congress has like never before given the American utility construction industry resources to improve thousands of communities across America, said National Utility Contractors Association CEO Doug Carlson.

Infrastructure with Sustainability and Equity program later this year would also exemplify the focus for infrastructure investments. “That’ll give you a sense, but we’ll have so much more to work with” via the IIJA, Buttigieg added. Jim Tymon, AASHTO executive director, said association members and state DOTs want to work with USDOT to implement the law as soon as possible. “State and local transportation agencies are eager to get to work on the multi-modal projects that will provide real benefits to the people of every community across the country.” AGC praised the IIJA for its benefits to the supply-chain system, saying because of the bill’s vote, state and local officials can invest in a more efficient network. “They will also be able to improve roads and bridges to make them safer and more reliable,” said Stephen Sandherr, CEO of the AGC. The American Society of Civil Engineers recently graded the country’s infrastructure system at a C-. “Metro areas will be able to better maintain and expand transit systems,” Sandherr added. “And water authorities will be able to further safeguard the quality of local drinking water, among other improvements funded by this bill. The measure also provides needed investments to make infrastructure more resilient to extreme weather events.” Michael Bellaman, president and CEO of Associated Builders and Contractors (ABC) lauded the bill for the

opportunity it presents to modernize the nation’s infrastructure, and said ABC members are ready to bring the infrastructure system into the 21st century. But Bellaman tempered his praise, saying ABC is wary of some of the bill’s exclusionary provisions and Biden administration statements that could restrict the eligibility of American workers to compete for and participate in construction projects. And Doug Carlson, CEO of the National Utility Contractors Association (NUCA), said, “never before has the American utility construction industry been given by Congress resources of this magnitude to improve thousands of communities across America.” “An extraordinary achievement” is how Carlson described the passing of the bill and its level of funding. And like the rest of the construction industry, NUCA members are eager to get to work. “They’ll be the ones excavating trenches for new water and wastewater lines,” he said of his association’s membership. “They’ll be the ones replacing dangerous lead pipes to bring clean drinking water to communities across the nation. They’ll be building stormwater systems and new water treatment plants. They’ll also be laying new fiber-optic broadband cables, and helping to build modern ports, highways, railroads, and airports.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 93

Page 94 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu Adds Drone, Smart Field to Job Site Solutions Contractors know that accurate numbers to track job site activity and topography can mean the difference between completing a project on time and on budget. With the addition of Smart Construction Field and Smart Construction Drone to Komatsu’s suite of job site technologies, contractors have two new tools to better manage projects. “When the Smart Construction group came in, they integrated everything together, and the transition felt seamless,” said Kevin Hawkinson, vice president of operations, A.W. Oakes & Son. “Now, we can take the data, transfer it to the machines, get data back from the machines to the office, and utilize all of that information across the board for bidding, customer reference and billing.” Smart Construction Field Using data to track spending allows contractors to analyze those numbers quickly and find cost-effective ways to manage and resource projects. Komatsu has partnered with Moovila, an experienced provider of project management software, to develop Smart Construction Field, a mobile app that allows contractors to easily record job site

With the addition of Smart Construction Field and Smart Construction Drone to Komatsu’s suite of job site technologies, contractors have two new tools to better manage projects.

activity and analyze operational efficiencies in near real time. Reports generated by Smart Construction Field can track daily job site conditions and task progress can be broken down by labor, equipment and materials, including machine utilization and fuel distribution, receipts, timecards and subcontractor work. Regardless of equipment brand, Smart

Construction Field can collect machine data from an entire fleet. Smart Construction Drone Collecting accurate topography is easy with Komatsu’s Smart Construction Drone survey technology. This drone solution captures quantities for production tracking and billing, without personnel walking the job

site to do a manual survey. Contractors can gather and analyze data throughout each project phase with topographic surveys that incorporate hundreds of thousands of data points. With the capability to take still photos from up to 400 ft. above ground level or under bridge decks, Smart Construction Drone can be used as pre-job verification or to keep stakeholders up to date. Smart Construction Drone pairs very well with Smart Construction Dashboard. Built to combine data from multiple sources into one comprehensive picture, Smart Construction Dashboard combines 3D design data with aerial mapping and intelligent machine data, to let contractors confirm quantities and visualize job site progress. Smart Construction Dashboard is powered by the 3D visualization power and geospatial accuracy of Cesium, a leading platform to visualize, analyze and share 3D data. Both Smart Construction Drone and Smart Construction Field are part of Komatsu’s Smart Construction solutions, an umbrella of smart applications created to help construction customers optimize their business remotely, and in near-real time. For more information, visit www.komatsu.com/en. 

Hitachi Ships First ZX210LC-6 Utility Excavator to N.A. Hitachi Construction Machinery machines excel at leveling and Americas Inc. (HCMA) announced forming work for large-scale resithat the first medium-sized Hitachi dential land and the development of ZX210LC-6 utility hydraulic excasocial infrastructure for roads, railvator, built for the North American ways and riverways. market, has shipped from Hitachi Hitachi utility excavators availConstruction Machinery Tsuchiura able in the Americas, including the Works (Tsuchiura, Ibaraki ZX210LC-6 model, are equipped Prefecture, Japan). with Solution Linkage Assist, a proThe ZX210LC-6 excavator is the prietary machine control feature, first of many Hitachi-built and which enables efficient work to be branded machines soon to be availperformed without over-excavating able throughout North America and the target work surface, as well as a Latin America, according to the hydraulic system that features highmanufacturer. efficiency AERIAL ANGLE techWith the joint venture dissolution nology to help improve worksite between Hitachi Construction safety and the brand’s ConSite OIL Machinery Group and Deere & service solution. Company, announced earlier this These machines are designed to year, HCMA is committed to indehelp contractors in the Americas pendently developing and deploymaintain the quality of work amid ing the latest product advancements, To celebrate this important milestone for Hitachi and its customers, the team in Japan responsible labor shortages and the decline in technologies and services through- for developing and building this first excavator unit gathered to give it a proper sendoff. experienced operators, as well as to out the region. contribute to improved productivity To celebrate this important milestone for the Americas — The Lineup Grows More Hitachi UH03, Japan’s first hydraulic exca- and safe operation. vator, Hitachi hydraulic excavators have Hitachi and its customers, the team in Japan Powerful.” Local sales for the latest Hitachi-built line This message signifies HCMA’s commit- been a flagship product of the Hitachi of equipment will start in North America in responsible for developing and building this first excavator unit gathered to give it a ment to its customers moving into the Construction Machinery portfolio. With a March 2022. range of models available to meet cusproper sendoff. Draped across the machine future. For more information, visit Since 1965, with the introduction of the tomers’ specific requirements, these www.hitachicm.us.  is a banner with the phrase “Empowering

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 95

CON S T R U C T I O E Q U IP M E N T

SELLING

AUCTION

HU9359 ‘12 John Deere 750J dozer

16 DE

ID9516 Kinshofer MQP 60-Y processor

DN N6254 ‘00 CME 550X driilling rig

FP9434 ‘04 Morbark Wood F H 6600 horizontal grinder Hog

C. DE

DJ2448 ‘16 Wirtgen FB2200 D H HT22 LA15 FCS cold planer

16 C. DE

C. DE DK1433 ‘08 CAT 953D track loader

16 C.

C. DE

DE DL5764 ‘18 CAT 330F L excavator

DJ7546 ‘06 CAT AT 7740 haul truck

30 C. DE

C. DE DJ2455 ‘16 John Deere 9620R 4WD tractor

30 C. DE

DK1430 ‘10 CAT AT 924H 9 wheel loader

DJ2450 ‘16 Wirtgen W250i milling machine

DJ7487 ‘15 Peterbilt 365 crane tr t uck

DEC. 30

ALL ITEMS SELL NO RESER

DK K3362 ‘12 JLG G12-55A tellehandler

INVENTORY INCLUDES: DIRECTIONAL DIR RECTIONAL BORING UNIT: ‘14 14 Ditc ch Witch JT60 EXCAV VA ATORS: ’12 12 K Komatsu PC490LC PC490LC-10 10, ‘06 06 Hitachi ZX200LC, ZX200LC ‘04 04 John Deere 225C, 225C ‘04 04 Komatsu PC200LC PC200LC-7L 7L WHEEL LOADERS: ‘18 Case 321F, ‘14 Komatsu WA320-7 SERVICE TRUCK: ‘09 Int’l 4300 BACKHO OES: ‘04 CAT AT 420D, 4 ‘04 JCB 214 TIL LE PLOW: ‘00 Buckeye 6200M TELEHANDLER: ‘07 CAT TL943 SKID STEERS: ‘18 New Holland C245, ‘15 CAT 272D, ‘10 Bobcat T300 and more. All items are sold d “A “AS IS.” 10% buy uyers premium ap pplies. Aaron McKee TX T X License Li # #16401.

BID NOW W! purrplewave.ccom

Page 96 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. DECEMBER 2021 CRANE SAFETY COURSES December 13 – December 16, 2021 Mobile Crane Inspector Training, Houston, TX December 14 – December 17, 2021 Overhead Crane Inspector Training, Houston, TX December 15 – December 17, 2021 Rigging Inspector Training, Orlando, FL December 20 – December 21, 2021 Aerial Work Platform Operator & Inspector Training, Houston, TX December 20 – December 23, 2021 Overhead Hoist Maintenance Training, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) 2022 AED Summit Dates: January 17-19, 2022 Location: Disney’s Coronado Springs Resort Orlando, Florida Description: The AED Summit is your annual opportunity to come together with professionals across the heavy equipment industry spectrum to improve yourself and your team and to build meaningful connections. Companies travel from all over the world to attend Summit; don’t miss your chance to meet with like-minded industry professionals! Registration is now open! Visit https://aednet.org/events/summit for more information.

INDEPENDENT EQUIPMENT DEALERS ASSOCIATION (IEDA) 2022 Annual Meeting Dates: February 11–13, 2022 Location: Reunion Resort Kissimmee, FL Description: T'S OUR 20TH ANNIVERSARY SO WE'RE WHOOPING IT UP BIG! IEDA Is Growing – Which Means The 2022 Annual Meeting Will Be Exploding With The Best and The Brightest of the Industry More independent equipment companies than ever now recognize the stature IEDA membership brings to their reputation and the immense value membership pours into their daily business growth 52 weeks of the year. ASSOCIATED GENERAL CONTRACTORS OF MINNESOTA And when this booming group gathers in person for 60 supercharged hours, the collective, best-of-the-best brain power is (AGCMN) electrifying. 2022 Minnesota Construction Summit Registration is now open. Date: January 11-12, 2022 For more information and to register, visit https://www.iedaLocation: St. Paul RiverCentre group.com/2022-annual-meeting/ 175 Kellogg Blvd. West St. Paul, Minnesota Description: The 2022 Minnesota Construction Summit is the NATIONAL PAVEMENT EXPO (NPE) event of the year for the Minnesota construction industry! 2022 National Pavement Expo & Conference Featuring inspirational keynote presentations, educational ses- Dates: February 23-26, 2022 (Conference) sions on topics that impact real life in our industry, exhibitors February 23-25, 2022 (Expo) with relevant and vital products and services, and fantastic net- Location: Charlotte Convention Center working opportunities, this is an industry event not to be Charlotte, NC missed! Come and be a part of the 2022 Minnesota Description: National Pavement Expo brings vendors and conConstruction Summit - Building Together Again. Registration is tractors together who make their living from asphalt and connow open. crete paving, sealcoating, striping, sweeping, crack repair, Price: $200 pavement repair, and snow removal to network with other For more information and to register, visit paving professionals and attend industry workshops. https://www.agcmn.org/events/constructionsummit./ In addition to hosting 200+ leading brands from the paving and pavement maintenance industry, National Pavement Expo ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) delivers more than 50 conference sessions over a 4-day span. 2022 AED Summit Whether you want to increase industry knowledge, sharpen Dates: January 17-19, 2022 your skills, improve efficiency, or learn about the latest and Location: Disney’s Coronado Springs Resort greatest products, you can do it all here! Orlando, Florida Description: The AED Summit is your annual opportunity to The program design of the conference allows ample opportunicome together with professionals across the heavy equipment ty to meet and network with leading contractors in the paving industry spectrum to improve yourself and your team and to industry. build meaningful connections. Companies travel from all over Registration is now open. the world to attend Summit; don’t miss your chance to meet For more information and to register, visit https://nationalpavewith like-minded industry professionals! mentexpo.com Registration is now open! Visit https://aednet.org/events/summit for more information. AMERICAN INSTITUTE OF STEEL CONSTRUCTON (AISC) NASCC: The Steel Conference WORLD OF CONCRETE (WOC) Dates: March 23-25, 2022 World of Concrete 2022 Location: Colorado Convention Center Dates: January 18-20, 2022 (EXHIBITS) Denver, Colorado January 17-20, 2022 (EDUCATION) The North American Steel Construction Conference (NASCC) is Location: Las Vegas Convention Center the premier educational and networking event for the structural 3150 Paradise Road, Las Vegas, Nevada Description: When the world stopped, you kept going. steel industry, bringing together structural engineers, structural Adapting. Giving a master class in resilience and being an steel fabricators, erectors, detailers, and architects. In addition essential worker. Now, celebrate how far you’ve come and dis- to 150+ practical seminars on the latest design concepts, concover the innovation helping our community evolve, endure, struction techniques, and cutting-edge research, the conference and thrive at WOC 2022. Part knowledge, part equipment, part also features 200+ exhibitors showcasing products ranging connections—World of Concrete is 100% of what you need to from structural design software to machinery for cutting steel keep grinding it out through disruptions to the supply chain, beams, and plentiful networking opportunities. One low regissafety and beyond. Get your hands on advanced technology tration fee gains you access to all of the technical sessions, the and machinery, access the newest training and techniques in keynote addresses, the T.R. Higgins Lecture, and the exhibitor concrete and masonry, and build momentum for another showcase. unstoppable year. Registration is not yet open. EXHIBITS: Original equipment manufacturers from around the world and exclusive U.S. distributors of equipment, tools, prod- WORLD OF ASPHALT (WOA) ucts and services for the commercial construction, concrete 2022 World of Asphalt Show & Conference and masonry industries. WOC attracts approximately 1,500 Dates: March 29-31, 2022 exhibiting companies and occupies more than 700,000 Location: Nashville Music City Center square feet of indoor and outdoor exhibit space. 201 Fifth Avenue South WHO ATTENDS WOC? More than 60,000 industry professionNashville, Tennessee 37203 als from all around the world, representing all segments of the Description: World of Asphalt is the leading asphalt trade show construction industry: Commercial Contractors, Concrete and conference. Industry manufacturers and service providers Contractors, Concrete Pumpers, Construction Managers, Dealers/Distributors, Decorative Concrete Contractors, in the aggregate, asphalt, pavement maintenance, and traffic Designers and Specifiers, General Contractors, safety industry sectors come together to showcase their latest Block/Segmental Unit Producers Masonry Contractors, products and technologies. 500 Exhibitors Architects, Engineers, Block Producers, Ready Mix Producers, 120 Education Sessions Rental Equipment Centers, Repair Contractors, Residential Co-Located with AGG1 Contractors, Specialty Concrete Contractors, Precast, Pipe and Registration is now open! Block Producers, Precast/Prestressed Producers, and more. The standard price to attend World of Asphalt is $80, however Registration is now open! PLEASE BE ADVISED: You must register online prior to WOC we offer discounted rates leading up to the show. Education and bundling packages are also available. 2022, as there will be NO onsite registration. Visit https://www.worldofasphalt.com for more information. Visit www.worldofconcrete.com for more information.

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 97

48 ANNUAL FLLORIDA AUCTION Wednesday February 116th - Saturday 19th 2022

15-16 John Deere 470G LC - choice

2018 Caterpillar 336FL

2017 Caterpillar 323FL - choice

2020 Caterpillar 313FL

2018 Komatsu D65PX-18 - choice

2017 Caterpillar D6T LGP

2016 Leeeboy G700

2014 John Deere 524K

14-15 Volvo L90G - choice

2015 TTere erex TLB840R

Unused TTere erex 2506

2017 Boobcat T650

2015 Prinoth Panther T8 Crawler Carrier

2014 V Volvo olvo SD115 - choice

500+ Engines!

Selling onsite & online | 654 West Southport Rd, Kissimmee, FL 34746

www.yoderandfreyy.com .com

Page 98 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AED SUMMIT/CONDEX ..........................................................................24 ALEX LYON & SON INC ..........................................................................96 ALEX PARIS CONTRACTING CO INC ....................................................20 ALTA EQUIPMENT COMPANY - WEST ................................................100 AMERICAN STATE EQUIPMENT ..............................................................7 AMULET ..............................................................................................54,57 ASCENDUM MACHINERY INC ..................................................................9 ASPEN EQUIPMENT................................................................................81 ASTEC KPI-JCI ........................................................................................39 BANDIT INDUSTRIES INC ..................................................................42,43 BANE-WELKER ........................................................................................34 BARGAINS................................................................................................88 BIG IRON AUCTIONS ..............................................................................91 BLUE RIDGE TRACTOR ..........................................................................31 BOMAG AMERICAS INC ..........................................................................25 BOSS PRODUCTS ..................................................................................84 BROOKS TRACTOR ................................................................................21 CEG SCALE MODELS ............................................................................49 CONDUIT SEARCH GROUP....................................................................29 CONSTRUCTION EQUIPMENT GUIDE ........................23,62,76,87,89,93 CSTK JCB ................................................................................................28 CUSTOM MADE PRODUCTS ..................................................................31 DOOSAN ............................................................................................26,27 DOOSAN PORTABLE POWER ................................................................75 DURA TECH INDUSTRIES ......................................................................46 E TIP INC ..................................................................................................34 ESCO CORP ............................................................................................55 EXACT CRANE & EQUIPMENT CORP ..................................................31 FABICK CAT................................................................................................2 FAE USA INC ............................................................................................48 FARM-RITE EQUIPMENT INC ................................................................16 FELLING TRAILERS............................................................................70,71 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................12 FOLEY EQUIPMENT CO..........................................................................17 GARY CARLSON EQUIPMENT ..............................................................10 GROVE WORLDWIDE ............................................................................99 HANSEN AUCTION GROUP ....................................................................91 HINIKER....................................................................................................85 HITCH DOC ..............................................................................................82 HYUNDAI CONSTRUCTION EQUIPMENT ........................................50,51 ILLINOIS TRUCK & EQUIPMENT ..............................................................3 IRAY AUCTIONS INC................................................................................91 JEFF BELZER ..........................................................................................66 JJ SCHECKEL CORP ..............................................................................15

JOHN DEERE ..........................................................................................59 KAGE INNOVATION ................................................................................83 KIRBY-SMITH MACHINERY INC..............................................................19 KLEEMANN ..............................................................................................41 KOBELCO CONSTRUCTION MACHINERY ......................................60,61 KOMATSU AMERICA CORP ..............................................................76,77 KUBOTA EXCAVATOR..............................................................................63 LABOUNTY MANUFACTURING INC ......................................................58 MAVERICK ENVIRONMENTAL ................................................................46 MB AMERICA INC ....................................................................................48 MCCANN INDUSTRIES INC ......................................................................6 MCCOY ....................................................................................................11 METSO OUTOTEC ..................................................................................37 MID COUNTRY MACHINERY ..................................................................68 NORAM ................................................................................................72,73 NORTH AMERICAN ATTACHMENTS ......................................................58 PAT KELLY EQUIPMENT CO INC..............................................................6 POWERSCREEN MW DEALER GROUP ................................................44 PURPLE WAVE INC ................................................................................95 RACKERS EQUIPMENT CO ....................................................................47 RAMMER ..................................................................................................47 ROAD BUILDERS MACHINERY ..............................................................13 ROGERS BROTHERS CORPORATION ..................................................65 ROLAND MACHINERY INC........................................................................5 SANY AMERICA INC ................................................................................74 SCHAEFER ENTERPRISES ....................................................................57 SENNEBOGEN ........................................................................................36 SMH GROUP-US ......................................................................................45 STAR EQUIPMENT LTD ............................................................................6 SUMMIT SUPPLY GROUP ......................................................................28 TERAN INDUSTRIES INC ........................................................................56 TEREX FUCHS ........................................................................................38 TOWMASTER INC. ..................................................................................67 TRI-STATE TRAILER SALES ..................................................................69 VLP AN EQUIPMENTSHARE COMPANY................................................25 WORLD OF CONCRETE..........................................................................33 YODER & FREY AUCTIONEERS ............................................................97

OHIO STATE SUPPLEMENT COLUMBUS EQUIPMENT CO ..................................................................8 EQUIPMENT CORP OF AMERICA ............................................................5 GORILLA HAMMERS ................................................................................1 JCB OF OHIO ............................................................................................6 SOUTHEASTERN EQUIPMENT CO ..........................................................3 THE MCLEAN CO ......................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 11, 2021 • Page 99

DELIVERIING PERF ORM MANCE AND VERSSATILITY T Reliability, value and indusstry-leading performance are yo ours with our comple ete portfolio of mobile m telescopiic cranes. Grove products are available in n:

> All-terrain models m with capacitie es from 50 t (55 USt) to t 450 t (550 USt) > Rough-terraain models with capacities from 30 t (30 USt) to 150 t (165 USt) > Truck-moun nted models with capacities from 36.3 t (40 40 USt) to 100 t (115 USt) > Telescoping crawler cra models with capacities from 30 t (30 USt) to 127 t (140 USt) > Industrial models m with capacities from 8.1 t (9 USt) to o 22 t (25 USt)

www.m manitowoc.com

Kirby-Smith Machinery Inc. www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550

6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300

Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757 329 2nd Street Industrial Building 145 Proctor, MN 55810 800/352-2757

Page 100 • December 11, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2UODQG 3DUN ,/ 708.349.8430 6RXWK (OJLQ ,/ 630.883.3320 6SULQJ *URYH ,/ 815.581.0071 2WWDZD ,/ 815 313 2070 815.313.2070 %ORRPLQJWRQ ,/ 309.585.3800

Re ach highher. We haave v youu covered. red.

*DU\ U\ ,1 219.977.4210

20 20

The future always dem mands more. From you, and from your equipment. Volvo demolition excavators feature unprecedented reach and state-of-the-art guarding packages straight from the factory. And with dedicated support from m Alta Equipment — the 2020 Volvo Dealer of the Year Year — you’re y equipped to handle whate ever tomorrow throws your way. w Visit v volv olv voc oce.co om/demo or contact y your our loc ocal Alta Equipment dealer today today y.

Vo lvo D e a l e r o f t h e Y e a r

altaequipment.com