Published Nationally
$3.00
®
Midwest Edition
December 12 2020 Vol. XXV • No. 25
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com
Inside
By Cindy Riley CEG CORRESPONDENT
ASV Increases Production Capacity in Grand Rapids...8
Martin Equipment Ushers in New Era of Female Leadership...18
McCloskey System Offers Solution for Barton Malow...31
Table of Contents ................4 Aggregate & Recycling Section ..........................31-47 Attachment & Parts Section ......................................51-55 Truck & Trailer Section ........ ......................................57-65 Snow & Ice Section ......67-71 Auction Section ............86-93
WSP photo
At the south end of the project, crews are building a temporary bridge over Lentzier Creek.
Survey Says! Protecting Your Business With Pre-Construction Site Analysis By Lucy Perry CEG CORRESPONDENT
Business Calendar..............92
Property damage claims against construction contractors, prompted by construction operations, are common. One of the biggest generators of property claims for structures near construction sites is vibration
Advertisers Index ..............96
see ANALYSIS page 24
In southern Indiana, work is continuing on a roughly $14.5 million project that will provide a continuous route for heavy-haul vehicles between River Ridge Commerce Center and the Port of Indiana at Jeffersonville. This includes an interchange with SR 265, which was constructed as part of the East End Crossing of the Louisville-Southern Indiana Ohio River Bridges Project. “The new route is designed to heavy-haul standards to accommodate vehicles of up to 134,000 pounds,” said Natalie Garrett, Indiana Department of Transportation (INDOT) public relations director. The route will serve the growing freight traffic in the area between River Ridge and the Port of Indiana. The increase is due mostly to the 2016 opening of the East End Crossing, connecting the east side of Louisville, Ky., with Clark County, Indiana. The two-lane roadway is being built, in part, to serve a new bridge over Lentzier Creek. Construction on this section of the Heavy Haul Transportation Corridor began last fall, with a see CORRIDOR page 66
Page 2 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2014 Cat 308E2 CR / $79,000
2015 Cat 323F / $99,000
2006 Cat 345CL / $67,000
SN: FJX00258 Hours: 2,565
SN: BZY00890 Hours: 7,702
SN: PJW01053 Hours: 13,852
2004 Cat D10R / $419,000
2014 Cat 982K / $219,000
2002 Cat 966G / $45,000
SN: AKT00618 Hours: 10,860
SN: W7K02140 Hours: 9,664
SN: 3SW01440 Hours: 19,936
2008 Cat 140 / $129,000
2013 Cat 140M2 / $165,000
2011 Cat 12M / $130,000
SN: DX200822 Hours: 7,041
SN: R9M00374 Hours: 5,499
SN: B9F00870 Hours: 5,927
636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 3
00.99% .99% foor or 54 5 MONTHS MONTHS 90 DA 90 DAYS YS N NO OP PA AYM YMENT YME MEN ENTTS TS!
815-9 941-19 900
150
E CA EX C VATORS O FOR SALE!
2018 Kobelco Midi SK85C CS-3E ... $84,500
2018 Kobelco co SK85CS-3E ......... $64,500
2018 Kobelco Mini SK55SRX-6E E ... $49,500
2016 Kobelco Minii SK55SRX-6E .. $44,500
7 stick, 7’ stick 8 8’ pushblade, pushblade aux. aux hyd draulics additional draulics, counterweight, 18,700 lbs., 1,2 205 hrs., 0.99% for 54 Months ............................................ #KOB369
17.5 rubber tracks, s 7’ s, 7 stick, stick 8 8’ pushblade, aux hydraulics, mechanical quick k coupler, additional counterweight, 18,700 99% for 54 Months ................... #KOB344 lbs., 2,392 hrs. 0.9
Warranty W arranty 3,000 hrs. or o 5/6/21
Warranty 3 3,000 hrs. or 10/24/20
57 5’ 7” stick, 12’ 10 10” dig depth, 16” rubber tracks, acks 1-2 way, acks, aux. hydraulics, 6’ 5” hydraulic 4-way angle e pushblade, additional counterweight, pattern control, 12,295 lbs., 784 ..... #KOB359 hrs., 0.99% for 54 Months ............................
37.4HP 37 4HP diesel, 5’ 5 5” stick, 16 16” rubber tracks, aux hydraulics, 6’ 5” hydraulic 4-way angle le pushblade, swing boom, additional counterweight, pattern tern control, 2 speed travel alarm, 99% for 54 Months ........ #KOB305 12,295 lbs, 1,094 hrs. 0.99%
2018 Kobelco SK270SRL LC-5 .. $159,500
2018 Kobelc co SK140SRLC-5 .... $119,500
157HP, 31.5” pads, 9’ 8” stick, 21’ 9” dig depth, 1 & 2 way hydraulics, rotation circuit, rear camera, additional counterweight, work lights, belly pan, 60,000., 2,101 hrs., 0.99% for 54 Months ................. #KOB413
19.7” triple bar g grousers with rubber pads, 9’ 4” stick, 19’ 4” dig depth, 1-2 way hydraulics, push blade, additional counterwe eight, work lights, belly pan, 33,800 lbs. % for 54 Months ........ #KOB402 1,579 hrs., 0.99%
Warranty 3,000 hrs. or o 12/9/21
Wa arranty 3,000 3 hrs. or 6/10/21
2018 Kobelco SK170LC-10 ............. $POR
2017 Kobelc co SK350LC-10E .... $209,500
2018 Kobelco SK210LC-9 ...... .. $98,500
2018 Kobelco SK270SRLC-5 270SRLC-5 ......... $159,500
23.6” pads, 10’ 2” stick, 21’ 3” dig dep pth, pattern control, 1-2 way auxiliary hydraulics, work lights, 3 38,800 lbs., 1,181 hrs., 0.99% for 54 Months ................................. #KOB410
286HP, diesel, 3 31.5” pads, 137” stick, hand control 1-2 way hydraulics, pattern changer, air suspension seat with heat, ccab guard, 83.300 lbs., 1,610 hrs., 0.99% for 54 Mon nths ................................... #KOB314
A/C,157HP, Tier 4 diesel, 31.5” pads, 9’ 9”” stick, 22’ dig depth, hand control 1-2 way auxiliary hydraulics, aulics, pattern f 54 Months control, 48,500 lbs., 3,411 hrs., 0.99% for ................................................................. ..... #KOB244
A/C, HINO 157HP diesel, sel, 31.5” pads, 9’ 8” stick, 1 and 2 way auxiliary hydraulics, draulics, rotation circuit, 60,000 lbs., 1,963 hrs., 0.99% % for 54 Months ..... #KOB389
Wa arranty 3,000 hrs. or o 11/30/21
Wa arranty 3 3,000 hrs. or 3/4/21
Warranty 3,000 hrs. or 9/2/22 2
2018 Kobelco Midi SK85CS-3E .. $79,500
2017 Kobelco SK300LC-10E K300LC-10E .. $174,500
Bridgestone geo pads, 7’ stick, 8’ pushblade, de, aux. hydraulics, 18,700 lbs., 1,678 hrs., 0.99% for 54 Months ......................................................................... ...... #KOB371
13’ 1” stick, aux hydraulics, lics, 68,100 lbs, 2,533 hrs., 0.99% for 54 Months .................................... ................................. #KOB312
Warranty 3,000 hrs. or 5/6/2 21
Warranty 3,000 hrs. or 8/6/20
Wa arranty 3,000 0 hrs. or 8/7/21
sales@iltruck co sales@iltruck.co om • rental@iltruck k com • 320 Briscoe Drive, k.com Drive Morris Illino ois 60450
www.iltruck.com .iltruck com
Page 4 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
IN THIS ISSUE 8
MDOT BUILDING TEMPORARY M-30 BRIDGE OVER TOBACCO RIVER
The Michigan Department of Transportation (MDOT) will begin building a temporary M-30 bridge over the Tobacco River in Gladwin County following extensive damage to the corridor during May flooding.
8
Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
14
67
To read these stories and many more, visit www.constructionequipmentguide.com
FEATURES
8
MIDWEST EDITION
ASV INCREASES PRODUCTION CAPACITY IN GRAND RAPIDS
60
XL SPECIALIZED TRAILERS SET TO EXPAND FACILITY
AGGREGATE PRODUCT & RECYCLING SECTION
ASV Holdings Inc., a manufacturer of all-purpose and all-season compact track loaders and skid steers, will increase production capacity by approximately 30 percent at its Grand Rapids, Minn., facility in 2021.
XL Specialized Trailers plans a $6 to $7 million expansion to its headquarters in Manchester, Iowa. The expansion will increase production capacity by more than 30 percent.
Goodfellow Bros. is the proud recipient of one of three commemorative Cat D6 XE dozers — a special edition high-drive electric drive dozer built specifically to celebrate Caterpillar’s production of 175,000 medium high-drive dozers.
The manufacturer of innovative wear parts for more than three decades, Willoughby, Ohio-based Winter Equipment’s blade-saving technologies have become a quality standard in the snow removal industry.
Martin Equipment of Illinois Inc. has secured certification as a Women’s Business Enterprise by the Great Lakes Women’s Business Council, a regional certifying partner of the Women’s Business Enterprise National Council.
In a classic case of art reflecting reality, the LEGO Technic 6X6 articulated hauler Volvo A60H model also is an impressive work of engineering. Inside its giant box are 2,193 pieces, including six large tires and heavy-duty motors.
44
Exodus Machines announced an organization name change to Exodus Global to reflect its expanding manufacturing of operations. Exodus Global is a privately held, local family business in Superior, Wis.
John Deere Construction and Forestry Division has named McCoy Construction & Forestry as a 2020 winner of its Onyx Circle award. MCF has seven locations in Minnesota, Wisconsin and the Upper Peninsula of Michigan.
86 92
COMING AUCTIONS BUSINESS CALENDAR
The Illinois Association of Aggregate Producers (IAAP) Education Foundation Scholarship program strengthens the Illinois aggregates industry by promoting the education of worthy students.
With the dates recently set, Ritchie Bros. already is accepting consignments for its massive, six-day Orlando auction on Feb. 15 to 20, 2021. The 2020 event featured more than 13,000 equipment items.
Nesco Holdings Inc. announced on Dec. 3, 2020, it has entered into a definitive agreement to acquire Custom Truck One Source (CTOS). Nesco and CTOS are providers of specialized truck and heavy equipment solutions.
Yoder & Frey, auctioneers of heavy construction and agricultural equipment and the founders of the Kissimmee Winter Auction, is preparing for its biggest sale of the year, scheduled for Feb. 10 to 13, 2021, in Kissimme, Fla.
51 54 54 55
LOEGERING ST Series Stabilizing, Milling Attachments BANDIT SG-75 Stump Grinder PETTIBONE Poclain CreepDrive for Speed Swing 445F HULTDINS Purpose-Built Industry Rail Grapple
14
GOODFELLOW BROS. RECEIVES FIRST CAT ELECTRIC DRIVE DOZER
18
MARTIN EQUIPMENT USHERS IN NEW ERA OF FEMALE LEADERSHIP
18
EXODUS MACHINES EXPANDS, NOW KNOWN AS ‘EXODUS GLOBAL’
26
IAAP ANNOUNCES 2021 EDUCATION FOUNDATION SCHOLARSHIPS
56
NESCO HOLDINGS TO ACQUIRE CUSTOM TRUCK ONE SOURCE
Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.
Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
www.constructionequipmentguide.com
83
88
88
VOLVO CELEBRATES HALF-CENTURY OF ARTIC HAULERS WITH LEGO TECHNIC JOHN DEERE NAMES MCCOY 2020 TOP-PERFORMING DEALERSHIP RITCHIE BROS.’ 2021 ORLANDO AUCTION SET FOR FEBRUARY
YODER & FREY PREPARES TO ATTEND 2021 KISSIMMEE WINTER AUCTION
31 36 38
MCCLOSKEY SYSTEM OFFERS SOLUTION FOR BARTON MALOW
FAE-PRIMETECH PT PRIME MOVERS REDUCE WILDFIRE POTENTIAL TEREX MATERIALS PROCESSING ANNOUNCES NEW LEADERS
EPIROC USA LAUNCHES TRY-AND-BUY PROGRAM FOR FLEXIROC T30 R
DEPARTMENTS EQUIPMENT
Joseph S. McKeon
Kent Hogeboom
Ed Bryden
Patrick Kiel
• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas
• National Sales Manager
• Central and Eastern Indiana • Michigan • Ohio • Kentucky
• Iowa • Minnesota • Nebraska • North Dakota • South Dakota
Cell e-mail
Advertising e-mail production@cegltd.com
Mobile
78
WINTER EQUIPMENT BEGINS TO EYE PRIVATE SECTOR MARKET
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site
67
YouTube
773/769-4090 312/953-0375 jmckeon@cegltd.com
Cell e-mail
315/866-1423 518/221-5159 khogeboom@cegltd.com
Cell e-mail
440/243-9690 440/865-0630 ebryden@cegltd.com
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from
Cell e-mail
952/353-1770 612/481-8557 pkiel@cegltd.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 5
V I S I T
Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers
2017 KOMATSU 845
$339,500
2012 KOMATSU D51PX-22
2016 KOMATSU D61PX-24
$189,500
2015 WIRTGEN W220
2011 WIRTGEN W220
$249,500
2016 KOMATSU D51PXI-22
$179,500
2006 VALMET 840.3
2018 KOMATSU PC210LC-11 $179,500
2017 KOMATSU WA380-8
$219,500
2017 KOMATSU WA320-8
STK# VT20014, 2,200 HRS, EAU CLAIRE, WI
STK# KM19412, 3,103 HOURS, CAPE GIRARDEAU, MO
STK# WG19030, 5,532 HOURS, SPRINGFIELD, IL
STK# KM20049, 692 HOURS, DEFOREST, WI
$124,500
STK# KM17574, 3,379 HOURS, DEFOREST, WI
$CALL
STK# WG19010, 3,964 HRS, SPRINGFIELD, IL
STK# KM19657, 3,884 HOURS, DEPERE, WI
STK# KM19470, 1,219 HRS, BOLINGBROOK, IL
2015 KOMATSU 931.1
$275,000
2017 KOMATSU PC210LC-11 $149,500
2015 CAT 501HD
$210,000
2015 KOMATSU PC490LC-11 $259,500
STK# VT19025, 7,957 HOURS, ESCANABA, MI
STK# CT20002, 5,743 HRS, DEPERE, WI
$85,000
STK# VT20015, 19,000 HRS, ESCANABA, MI
$159,500
STK# KM19425, 1,056 HRS, SPRINGFIELD, IL
STK# KM19698, 2,879 HRS, EAST PEORIA, IL
STK# KM17372, 4,092 HOURS, FRANKSVILLE, WI
2018 WIRTGEN W120CFi
2016 KOMATSU PC138USLC-11 $119,500 STK# KM19402, 2,360 HRS, SPRINGFIELD, IL
17 Roland Branch Locations in IL, IN, MI, MO, and WI
Used Sales (217) 789-7711
$429,500
STK# WG20036, 724 HRS, MARENGO, IL
R O L A N D M A C H I N E R Y . C O M
Page 6 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Mark Kruepke • (630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com
View our complete Used & “Like New” inventory at McCannOnline.com
Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110 2016 Takeuchi TB260, s/n 126101567, 1100 Hours, Cab w/AC, Tag Coupler, 18”, 24” and 36” Buckets ........................$53,000
2015 Leeboy 8510C s/n 122257, 2750 Hours, Paving Width 8'-15', Heated screed, Legend Screed System ....................$59,900
2015 Case 721F, s/n NFF232870, 1909 Hours, Cab w/Heat and Ac, Ride Control, Cold Weather Package, 3.5 cu. Yd. w/CNH Coupler (JRB) ................................$115,000
2019 Case 621G, s/n NJF246160, 295 Hours, Cab w/Heat and Ac, Ride Control, Cold Weather Package, 3.0 cu. yd. w/CNH Coupler(JRB) ................................$129,500
McHenry* 815-385-0420 Wauconda 847-526-9444
Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800 Schereville* 219-865-6545 2018 Carlson CP130, s/n 109DB8P, 520 Hours, Contractor deluxe package $189,900
2018 Case 650M, s/n NJC100563, 250 Hours, Cab w/heat and AC, 96” Dozer Blade, 16” max life Chain............................$85,000
2018 Takeuchi TB216, s/n 216101568, 450 Hours, ROPS, Tag Coupler, Blade, Aux Hyds, Rubber Tracks ..................................$24,500
2016 Takeuchi TB230, s/n 130001742, 325 Hours, ROPS, Tag Coupler, Blade, Aux Hyds, Rubber Tracks ..................................$33,800
McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.
5920 North Lindbergh Blvd. Hazelwood, MO 63042 314-895-9500 www.patkelly.com
Michigan Marne* 616-371-7250
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 7
ROADTEC RX900 - ‘18, approx. 1050 hours, ROADTEC RP190 - ‘13, approx.. 6200 hrs. 12’6” drum, 24V night light package, ACE EZIV Carlson screed, Moba grade & slope conG&S, ext warranty ..............................$710,500 trols ......................................................$58,900
SAKAI R2H-2 - ’10 w/approx. 3850 hrs. antifreeze filled drums, #C002063............$39,850
PAVERS / ROAD WIDENERS BOMAG CR662RM - ‘15, 590 Hrs, Material Transfer w/Hopper, #C000763 ............$414,000 Midland SPD-8 - ‘19 w/250 Hrs, hyd. Variable strike-off, #C001697 ..........................$165,900 Midland SPR-6 - ‘18 w/700 Hrs, wash down, hyd. Variable strike-off, #C001737 ......$115,750 P.O.R. items may be on rent causing pricing and hours to vary.
BROOMS Roadtec FB100 - ‘16, approx.. 50 Hrs. Front mount, side-shift, A/C ............................$P.O.R.
MILLING MACHINES BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor......................................$174,000 BOMAG BM1200/35 - ‘15, 1150 Hrs, 4’ Drum, 3’ Also Available, Front Conveyor, #C000846 .... ..........................................................$298,000 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900 Roadtec RX-700 - ‘12 w/5000 Hrs., 7’2” drum, grade & slope controls, #C001978 ....$197,200
ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500
Grove RT880E – (’14), 80 Ton, 128’ Boom, 56’ Jib, 3,426 hrs, C001236…$409,000
Roadtec RP190E – (’17), 230 HP Rubber Tired Paver, 10’-19’6” Carlson Easy Screed, C002930...$P.O.R.
Liebherr L556 – (’11), 188 HP, 23.5R25EM tires, RC, QC, 4.58 YD bkt, #15360…POR
Manitowoc 10000B-1 – (’13), 75 Ton, 190’ Boom, 60’ Jib, C002371...$749,000
Large Selection of New & Used Equipment in Stock.
EXCAVATORS Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R.
CRUSHING AND SCREENING ASTEC GT104 - ‘17, 71 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ ..............................................................$P.O.R. ASTEC GT165 - ‘17, 390 Hrs, 5’x16’ Top Deck, 5’x15’ Bottom Deck, 10.5 Cyd Hopper, #C001250 ................................................P.O.R.
ROLLERS Sakai GW750-2 - ‘14, 691 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$99,950 Sakai R2H-2 - ‘09 w/approx. 2750 hrs. #C002062 ............................................$36,950 Sakai SW770HF - ‘17, w/930 Hrs, #C001144.... ............................................................$84,900 Sakai SW770HF - ‘17, 450 Hrs, 67” high frequency, #C001168............................$96,000 *Comes with any remaining standard and 3 year extended power train warranty.
Contact Chuck or Jason in Illinois
1-800-307-0221
crhodes@finkbiner.com jzeibert@finkbiner.com
www.finkbiner.com
AGGREGATE EQUIPMENT ASTEC GT205S, (’17), Triple Deck Crawler Mounted Screen Plant. #C003398............................................$CALL EXTEC S5, (’08), Double Screen Crawler Screening Plant, (2) 8’x5’ double deck vib screens, (2) hyd folding wing conveyors, #C002706 ..............................................................................................................................$95,000 JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI FT4250CC, (‘11) Track Mounted Impact Crusher, #C003741 ................................................................$CALL SANDVIK CH430, (‘13) Closed Circuit Cone Plant, 6’x20’ TD Screen, #40230 ......................................$493,000 KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL
CRANES GROVE RT650E, (’14) 50-Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$349,000 GROVE RT765E-2, (’14), 65-Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$369,000 GROVE TMS870, (’99) 70-Ton Capacity Crane, #220216 ......................................................................$129,000 GROVE TMS900E, (’05), 90-Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ..........................................$CALL GROVE TMS900E, (’06), 90-Ton Capacity Crane, #224554 ..................................................................$229,000 GROVE TM9120, (’00), 120-Ton Capacity Crane, #221331 ........................................................................$CALL
LOADERS AND EXCAVATORS: LIEBHERR A902 SPEEDER, (‘98) 10 x 20 Tires, 4 Outriggers, Aux Hyd, #C001293..................................$CALL LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R954CHD, Super Long Reach Excavator - 42'8" Boom, 32'10" Stick. 70' reach @ Ground Level, #C002856 ....................................................................................................................................................$POR LIEBHERR R946LC, (’14), Long Reach, 60’ Reach at Grade, 2.15 yd bkt. #C000938 ................................$POR
Milwaukee, WI 1-800-236-6900 Fax 414-541-1892
Wausau, WI 1-800-242-7113 Fax 715-675-9748
Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753
For information on our in-stock equipment, contact Matthew Pehler at:
mpehler@amstate.com or mobile 1-414-719-8700 or 1-800-236-6900 Visit us at: www.amstate.com
Page 8 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MDOT Building Temporary M-30 Bridge Over Tobacco River The Michigan Department of Transportation (MDOT) will begin building a temporary M-30 bridge over the Tobacco River in Gladwin County following extensive damage to the corridor during May flooding. Totaling $4.3 million, the temporary bridge is expected to open to traffic in mid-February. While several bridges on both state and local roads suffered damage, the M-30 causeway bridge near Stryker’s Lakeside Marina was washed away following the Edenville dam breach. The flooding and subsequent dam failure led to damage of two M-30 bridges and the Curtis Road bridge, all within 1 mi. of each other. MDOT staff determined a temporary bridge structure was the best use of federal emergency aid and supported its mission of restoring mobility as quickly as possible. “Reopening this second M-30 bridge is vital to our business,” said Edenville Market owner Gurbachan Singh. “We have really struggled to stay in business since the flood damage, and every bridge that reopens helps our business a little more.” By immediately beginning the analysis and design work required for a temporary bridge, the M-30 corridor will be restored within nine months of the initial bridge loss. Standard bridge construction requires several years of design work and review to ensure the appropriate size structure is installed, meeting the transportation
Acrow Bridge photo
in prefabricated modular steel bridge solutions. The Michigan Department of Environment, Great Lakes and Energy (EGLE) will be working concurrently to secure the existing Edenville Dam. This work is being completed to ensure future flooding does not place area residents and businesses in danger, and to address ongoing impacts on infrastructure and natural resources. This work will result in rapidly changing water levels and impact the stability of ice once winter recreation activities are in full swing. MDOT and EGLE request that the public refrain from all recreation activities while this work is ongoing.
May flooding and dam failures resulted in significant damage to roads and bridges, including the M-30 causeway bridge over the Tobacco River.
needs for the foreseeable future. Work to build this temporary bridge also will happen more quickly than normal since there is no existing structure to maintain traffic on. MDOT used an expedited bid letting process to garner bids for the temporary bridge building. Work is expected to begin immediately, with the awarded contractor, Anlaan Corp., reviewing the site and beginning to mobilize equipment. Temporary bridge components are being supplied by Acrow Bridge, a corporation specializing
Acrow Bridge photo
MDOT will build a temporary bridge consisting of prefabricated modular steel bridge components, helping to expedite the construction timeframe and restore full mobility to the M-30 corridor within nine months of the initial disaster. ACROW Bridge is supplying the steel bridge components.
ASV Increases Production Capacity in Grand Rapids ASV Holdings Inc., a manufacturer of allpurpose and all-season compact track loaders and skid steers, will increase production capacity by approximately 30 percent in Q1 of 2021, creating 28 new jobs in the company’s Grand Rapids, Minn. facility. The move will strengthen ASV machine availability in the compact equipment industry and comes amid the strong success of the new MAX-Series line combined with strong industry demand, according to the manufacturer. “We are pleased to invest in increased production capacity to support our growth,
in addition to adding jobs to the Minnesota workforce,” said Kevin Zimmer, president of YANMAR Compact Equipment North America, which encompasses the YANMAR Compact Equipment and ASV Holdings Inc. brands. “It’s a strong indicator of our success in growing as a comprehensive provider of compact equipment in North America.” The open positions include assemblers, welders, warehouse clerks, production staff and more. For more information, visit asvi.com/careers.
ASV is creating 28 new jobs in the company’s Grand Rapids, Minn. facility.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 9
USE S D EQUIPMENT .com
TRUSTED MACHINES FROM A TRUSTED DEALER. R
2018 CATERPILLAR 226D, ID# 8CR6660, SN HRD03367, 2789 HOURS..........................................$21,800
2015 CATERPILLAR D6NLGP, ID# HGN0619, SN PBA02615, 4498 HOURS ........................................$144,900
2013 CATERPILLAR 140M2AWD, ID# PUC0258, SN R9G00273, 6594 HOURS ................................$146,050
2015 CATERPILLAR S85D, ID# 5AR8500, SN S8515-12730, 2736 ................................................$64,900
2014 CATERPILLAR D6TLGP, ID# SUR0021, SN KSB01629, 5824 HOURS ........................................$192,700
2016 CATERPILLAR 289D, ID# TUC0223, SN TAW04753, 2433 HOURS..........................................$41,200
2014 CATERPILLAR 299D, ID# TUC0157, SN JST00618, 3696 HOURS ............................................$37,500
2016 CATERPILLAR TL1255D, ID# 6CR5940, ML700453, 4086 HOURS ..........................................$79,930
2015 CATERPILLAR 120M2AWD, ID# TUC0097, SN R9W00176, 4081 HOURS................................$138,600
2019 CATERPILLAR 272D3, ID# TUC0213, SN HX200548, 1024 HOURS ..........................................$58,400
2017 CATERPILLAR 735C, ID# PGN0653, SN TFJ00247, 3626 HOURS ..........................................$347,300
2005 CATERPILLAR 963C, ID# TUC0245, SN BBD01309, 6470 HOURS..............................................94,500
2005 CATERPILLAR 613C, ID# SUR0005, SN 8LJ02797, 2372 HOURS ..........................................$178,700
2016 CATERPILLAR TL1255D, ID# 6CR5940, SN ML700453, 4090 HOURS ..........................................$79,930
2014 CATERPILLAR CS64B, ID# RUC0170, SN C6400126, 2859 HOURS ..........................................$86,900
2018 CATERPILLAR 326F, ID# RGN0413, SN FBR20407, 1035 HOURS ........................................$171,430
Page 10 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
563-8 872-44112 112
Bellevue (Dubuque), Iowa sales@jjjscheckel.com RENT OR
RENT OR
BUY!
2002 CA ATT D11R - $1855,000
2009 CA ATT D10T - $$458,000 ,
7PZ High g Horse series, RRuns andd oper p ates to spec p , RJG S#, 1 Owner since new w,, 8,300 hours h on $683,000 $ U-blade A/C, HHeaat. Could AT Dealer D Complet p e Rebuild, SS ripper pp r,, bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Documented CAT i h tractor frrom i i ed, Like-new U/C paint, otherwise very straight om m good home. home U blade, Twin Twin tilt tilt, Well maintaine U/C.
RENT OR
BUY!
RENT OR
RENT OR
BUY!
2006 Komat atsu PC800LC-8 - $36 $368,000 ,
RENT OR
BUY!
2018 CA ATT 390FL FL - $68 $688,000
BUY!
(4)2014-2015 ) Volvo A440G’s $228,000 ,000 - $24 $248,000 , EA. $228
2014 CA ATT D6T LGP VP PA AT - $220,000 $ ,
RENT OR
RENT OR
BUY!
2018 CA ATT 390FL - $628,000 ,
2012 Komattsuu PC800LC-8 PC80 - $388 $388,000
6,250 Hrs, 1,472 idle, ARO CAT Acccugr g ade d GPS Ready R d . 3,276 Hrs. 2 Year Year pparts/laborr CAT AT warranty w y. 27’’ Boom. B 5,780 total hrs, 1,5500 at a idle. dl 2 Year Year PParts/Labor /L b Cat Reputa p tion 1-ow wner machine, Full historyy since new, bll d . Straight S ih l 1 ownner condition, Full F service Warrantyy Remains. 1 Ow 400 Total 11’10” 0” Stick. Erops, A/C, Diff Steerr,, VPPAAT 6-waayy blade 14’ Stick, Super p clean wnerr.. Super p straigh g t. 27’ Boom, 10,0,400 Total hrs, hrs Sttraigh g t, clean, fresh paint.11’ S and clean. Rent/Leasee or Buy. history andd oilil samples. 14’ Stickk, 77”” BBucket, Aux Hydraulics, B k New track pads B l Rent/Lease or Buy. d li EExcellent U/C. Quick couplerr,, 66”” Bucket, a k groups, 36”” pads.
RENT OR
RENT OR
BUY!
BUY!
2018 CA ATT 374FL - $56 568,000
RENT OR
RENT OR
BUY!
2017 CA ATT 374FL FL - $48 $488,000
7,200 Original g hrs, Reputa p tion machinne, Straigh g t, 2,893 Hours, 790 at idle. 2 Year Year Pa P rts/Service Factoryy 4,445 Hrs. 2 Year Year pparts/laborr CAT AT warranty w y. 26’’ BBoom, 10”” SStick i k, 72”” Bucket, i k Super i Full clean, original gi l. 11’1 11’10” B Goodd U/C w/ Cat Warrantyy Remains. Reputa p tion 1 Ownerr.. 13’7”” SStick 13’7”” SStick, p clean 1 owner condition, 32”” tr trackk pads. B Auxiliary R ease or Buyy.. service history andd oilil samples. l Rent/Lease or Buy. d Komatsu dealer tested & inspected. 72”” Bucket, A ili Hydraulics. H d li Rent/L
RENT OR
2015 CA ATT D8T - $295,000 ,
6,400 total frame hrs, 1,861 1 att idle dle, only l 4,539 actual 5,873 Hours, 1,293 293 aat idle. CAT Accugr g ade, d ARO ARO, GPS oper p atingg hrs. SU Bladde, MS Ripper pp r,, EErops, DDiff eady. Erops rops p , A/C, Diff D steerr,, VPPAAT 6-wayy blade pp r.. iff steerr,, rready b , MS ripper P i Servicee history since i new. Rent/Buy. Straight /L O i i l Paint, Original S h & clean, n, with history. hist Rent/Lease or BBuy.
BUY!
BUY!
2012 CA ATT D6T LGP VPAT - $$148,000 , 2012 CA ATT D6T XW VP PA AT - $$165,000 , 8,500 Hours, 2,700 at idle. CAT AT Acc A ugr g ade ad , AROO, O, GPS readyy. Erops p , A/C, Diff steerr,, Good G d unddercarriage g. Original, i l super clean machine. Rent/Lease or BBuyy..
2004 CA ATT D10TT - $350,000 $ ,
RJG Series, 23,037 hhours, 4,701 idle dl hhours, hours SSingle shank ripper pp r,, U blade withh ttwin Tilt. A/C, Heat. AT dealer d l maintained, Serviced and ready to go. CAT
BUY!
RENT OR
BUY!
2013 CA ATT 329EL 3 - $119,000 ,
4,700 Hours, New 54”” buck b k , 10’6”” Stick, bucket S i k Fullyy
loaded, Longg and Widee UC, Pattern changer g , Excellent llen
condition, Original O paint. Rent/Lease /L or Buy.
RENT OR
(4)2013-2016 ) CA ATT 740B’ 740B’s $188,0 ,000 EA. $$168, 168,00000 - $188
5,300-7,300 300 hhrs, Original igi l pain i t, EExcellen ll nt radial di tires, Factory tailgates, 1 ownerr.. RRent/Lease or Buy.
11,500 Hours, DDealer maintained, i i d, SService hi history,y, Oil O samples, Full work order done. Goood tirres es, Tailgates.
B POWERTRAIN PLUS REBUILDS
HIGH REACH CONVERSIONS
6 500 Hours, 6,500 H , Original g ppaint, Service history, hist y, Oil samples es, FFullll workk order complet p ed. Goodd tires, W ready. Rent/Lease or Buy. i Work
RENT OR
BUY!
BUY!
(5)2014 CA AT 740B’ AT 740B’s - $248 $248,,000 EA.
BUY!
((4)2007-2011 ) 1 CA ATT 740’ 740’s 2006 CA ATT 825H - $338,000 l r complet pl e po p wertrain rebuild$89,,0000 - $105,000 $89 , 0 EA. EA B1P series, 14,000 800 Hrs on CAT-dealer
2008 CA ATT CP56 - $89,000
Hrs, Radial di l tirires es, QQualit li y trade ad -ins i righ g t off the job j , l iinspec i from reputable company. CCAT AT DDealer inspections.
i EExcellent ll feet. Original engine g , torqque, transm misison. g paint. i Tilt blade, bl Excellent! Rent/Lease or BBuyy..
84”Vibratoryy padd foot foot, 2,585 HHrs, EEnclosed n l d CCab, A/C, Front blade option, p on, Original g paint, Veryy well maint’d, Fully eady d tto go. Rent/Lease or Buy. l Serviced S i d & rready R
ONVERSIONS ANK CO ATTER TTA WA
H DRUM ROLLERBLADES HOLMES SMOOTH
ATTU EXTREME DUTY DISKS A TTA
NEW!
NEW!
Ready to ship!
2017 CAT 349FL UHD D - $458,000
Ready to ship!
2008 CAT 740 Water Truck Holmes 11F - $23,00 23,000 / 16F - $29,000 4 Models - $32,000 - $42,000 EA. ’6” or 9’6” cuttingg width, id h, 32” or 40” Bllade d di diameters. $188,000. Zero hours oon Water Tank conversion. 2 Models, 11’ or 16’ cuttingg width. Made in Iowa. 12’6”
on custom Ul Ultra-High High RReachh Demolition li i 2006 CA ATT D10T Rebuild Inn Process ZCeronovhours ersion. 96’6” Total reach, h Quick attach boom & 7,900 Totall frf ame hrs, 4,000 Idle hrs, pre-emissions, Construction grade, extr gs, EExtreeme construction duty, Take t eme dduty. For hhaull road & site Massive bearings - $750,000. Zero hour Powerrtrain Plus, lines, Hydraulic tilt cab, Higheest quality pkg. a close llook! k! Thhe highest quality you will find! Radial tires, Immaculate,Fully servicedd & Ready to go. leveling, compacting & sealing dirt prior to rain event. OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available Mar M ch/2021
visit
WE OWN WHA ATT WE W ADVERTISE!
Scheckel.com JJS
for detailed photos, videos, an nd descriptions! 3, or 6 Month Contracts. R Options. WE RENT! 1,1Rent/Purchase
call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us for forr daily updates:
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 11
NORTH DAKOTA TA Williston 701.577.1249 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Piedmont 864.704.1060 Columbia 803.791.0740 Charleston 843.414.1120 GEORGIA Buford 678.318.9500 Savannah 912.964.8079
IMPROVE YOUR EEFFICIENC EFFICIEN NCYY.
Macon 478.200.3300
Get jobs done faster with effficient Volvo compact wheel loaders. They provide all-around visibility, excellent stability and easy access to tight areas — pluss the L20H model just won the Highest Retained Value Award™ in 2019 by EquipmentWatch. Imp prove cycle times and your profitability with powerful, effficient Volvo compact wheel loaders. Contact your nearest Ascendum location today.
ascendummachinery.com ascendummachinery.c . om .c
Page 12 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS
OFF ROAD HAULERS
CRANES
Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,
BACKHOES
P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS
HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000
MISCELLANEOUS
(2) Balderson Broom Attachment for Cat IT Machines,
HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,
8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500
DOZERS
ATTACHMENTS
Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,
BUCKETS
22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000
Over 100 Excavator, Loader, Specialized &
MOTOR SCRAPERS
Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500
Grapple Buckets in Stock -Call For Your Needs FORKS
Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55
(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500
Prices Are Negotiable - At Your Inspection
Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS
All Equipment is Owned & Operated By
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500
ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 13
#73969 2014 TAKEUCHI TS70R, CAB/AC | 550 HOURS ....................................................$31,500
#92950 2012 TAKEUCHI TL 12, CAB/AC | GP BUCKET | 2,438 HOURS ........................$37,500
#92880 2018 TAKEUCHI TL12V2, CAB/AC | 200 HOURS ....................................................$64,500
#81167C 2007 KOMATSU CK30-1, OROPS | 2600 HOURS............................................$23,500
#92987 2018 BOBCAT T595, CAB/AC | HIGH FLOW | 1,475 HOURS..............................$42,500
#92946 2006 DEERE 644J, CAB/AC | GP BUCKET | 21,150 HOURS ......................................$44,500
#92989 2016 CASE TV380, CAB/AC | MULTIPURPOSE BUCKET | 500 HOURS ............$49,500
#92977 2012 CASE 580SN, CAB/AC | 4X4 | EXTENDAHOE | 3,975 HOURS ................$39,500
#92913 2005 INGERSOLL-RAND SD77DX, 66” SMOOTH DRUM WITH SHELL KIT | 2,450 HOURS ....................................................$36,500
#83096 2008 KOMATSU PC138US-8, 4400 HOURS | BLADE ......................................$69,500
#92926 2013 KOMATSU PC490LC-10, 8750 HOURS | AUX HYD | QC ........................$109,000
#92802 2008 KOMATSU PC138USLC-8, 6,300 HOURS | RUBBER PADS | QC..................$55,500
#92985 2005 KOMATSU D65EX-15, CAB/AC | 13,400 HOURS ........................................$47,500
92983 2013 KOMATSU D65WX-16, CAB/AC | RIPPER | SIGMA | 6700 HOURS..............$99,500
#92907 2005 KOMATSU D65PX-15, CAB/AC | 6,100 HOURS ..........................................$64,500
#92968 2011 KOMATSU D65EX-16, CAB/AC | RIPPER | SIGMA | SWEEPS | 5700 HOURS.......... ..............................................................$109,500
Page 14 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Goodfellow Bros. Receives First Cat Electric Drive Dozer
The one-of-a-kind dozer features special fender decals and a custom, decorative blade to celebrate the company’s 2021 centennial.
The unique dark gray and black paint scheme was only one of two manufactured worldwide in this color.
Continuing the medium dozer line’s long history of innovation, the Cat D6 XE is the world’s first electric drive dozer offering elevated sprocket design for increased agility and 35 percent better fuel efficiency, compared to the previous 3-speed model D6T, according to the manufacturer.
Goodfellow Bros. is the proud recipient of all speeds and constant power to the ground ebrate the company’s 2021 centennial. fleet is a great example of our commitment one of three commemorative Cat D6 XE allowing it to move up to 10 percent more Goodfellow Bros. plans to feature the new to innovation and partnerships that make our dozers — a special edition high-drive elec- material per hour. In addition to increased commemorative dozer throughout its industry better.” tric drive dozer built specifically to celebrate performance, the electric drive also offers anniversary celebration in 2021. In addition to these features, the D6 is outCaterpillar’s production of 175,000 medium durability and simplified diagnostics, help“For nearly one hundred years, fitted with the Trimble Earthworks Grade high-drive dozers. ing reduce service and maintenance costs. Goodfellow Bros. has been on the forefront Control Platform. It offers dozer operators Caterpillar selected Goodfellow Bros. as a The unique dark gray and black paint of adopting innovative technologies to cab-mounted portability, a user-friendly recipient of the all-new dozer because of its scheme was only one of two manufactured improve operations and make jobs safer and Android UI, and the convenience of a 10-in. long-standing relationship with the compa- worldwide in this color. Additionally, the more efficient,” said Chad Goodfellow, touch screen. The platform is designed to ny. one-of-a-kind dozer features special fender CEO of Goodfellow Bros. help operators do more in less time for “The strong partnership between decals and a custom, decorative blade to cel“The addition of the Cat D6 XE to our increased productivity. Caterpillar, Hawthorne Cat and Goodfellow Bros. provided us a About Goodfellow Bros. unique opportunity to celebrate sigEstablished in 1921, GBI is a nificant and special milestones,” said fourth-generation family-owned Patrick Kearns, North America large heavy-civil contractor with industry region manager of operations in Hawaii, Oregon, Caterpillar. California and Washington. For “This commemorative medium nearly a century, GBI has transtrack-type tractor symbolizes so formed communities across North much of what we’ve accomplished America and abroad. With 12 over the last century and our commitoffices in Washington, Oregon, ment to building a better world.” California and Hawaii, GBI’s range Continuing the medium dozer of projects include airports, bridges, line’s long history of innovation, the reservoirs and dams, golf courses, Cat D6 XE is the world’s first electric harbors, highways, housing develdrive dozer offering elevated sprockopments, marinas, parks, underet design for increased agility and 35 ground utilities construction servicpercent better fuel efficiency, comes, wastewater treatment facilities, pared to the previous 3-speed model wind and solar farms, fisheries, D6T, according to the manufacturer. wildlife habitats and more. With no gears to shift, the electric Established in 1921, GBI is a fourth-generation family-owned large heavy-civil contractor with For more information, visit drive provides maximum torque at operations in Hawaii, Oregon, California and Washington. www.goodfellowbros.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 15
JD 844K, Cab, Air, Joystick, #113618 .............. ............................$159,500
JD 1050K, Single Shank JD 410E, 40 Ton, Bed JD 750K, LGP, 34” Pads, JD 160GLC, 10’ 2” Arm, Ripper, 156” Semi U, Heater, Bed Liner, Warranty, #112389 ............ 156” PAT Blade, Warranty, Warranty, #119370 ............ 24” Pads, Hyd Thumb, ............................$249,000 #119047..............$154,500 .......................... $395,000 #116099 ..............$114,500
JD 650K, LGP, 28” Pads, 128” PAT Blade, #115240.. ............................$116,500
Bomag BW211D-4, 84” JD 544K, Cab, Air, Coupler, JD 644K, Cab, Air, QC, JD 700K, LGP, 30” Pads, Smooth Drum, #109698 .... 132” PAT Blade, #113400.. #117132..............$126,000 3rd Spool Aux, #108584 .... ............................$146,000 ..............................$59,500 ............................$129,000
JD 772G, Tall Cab, Air, 14’ Blade, #93273 .................. ............................$119,000
NPK Hammers, All Sizes JD 744K, Cab, Air, JD 310SK, Cab, Air, 4x4, for All Makes. Inspected Ext Hoe, Aux Hyd, #106433 Coupler, GP Bucket, and Well Maintained, GH4 ..............................$54,500 #111720 ..............$139,500 –GH18
JD 210CW, 1 Piece Boom, Blade, #110532 ....$99,500
JD 824K, Cab, Air, RC, JD 850K, LGP, 168” PAT JD 210GLC, 9’ 7” Arm, JD 135D, 9’ 11” Arm, 24” JD 750K, LGP, 34” Pads, Pads, Hyd Thumb, #117348 Blade, Winch, #116218 .... Warranty, #115224 ............ Hyd Thumb, Hyd Coupler, 156” Blade, Ripper, ..............................$89,000 ............................$198,500 ............................$169,000 #115868 ..............$119,750 #119716..............$139,000
Page 16 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Isuzu Eco-friendly E 4J Engines... inside every REDT Tech ech™ 4J Power Unit Un .
Ec co-frien co f i ndly frien dl
CUSTOM MADE PRODUCTS Scrapers, Rollers & Graders
For Sale & Rent SIXTEEN LOCATIONS IN IOWA, NEBRASKA, & WISCONSIN The Isuzu 4J 3.0 0L (52-84 kW) engine has always been b reliable, eco-friendly, durrable, and technologically advance ed. The same qualities that ma ake the best Power Units. Contac ct your local Isuzu Distributorr and experience eco-friendly pow wer today.
Isuzu Motors A America, LLC :: 46401 Commerce Centter Drive, Plymouth MI 48170 :: 734.582.9470 82.9470 :: www.IsuzuREDT Tech.com ech.com
CALL ANYTIME 24/7
515-332-1875 Visit our website @ www.gncmp.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 17
The Bobcat® L23 small articulated loader is small enough to fit in small lots, backyards and other tight jobsites.
New Bobcat T76 Track Machine with Diamond 60” Tree Cutting Head
New 15-ton E145, Bobcat’s Largest Excavator in Stock with full line of all Bobcat Excavators on site and ready to rent or own.
New Bobcat Commercial & Residential Mowers in Stock!
Largest Selection in the Midwest!
®
Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000
Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500
Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000
New In Stock Bobcat MT100’s
Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL
Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500
Authorized Bobcat Dealer
U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281
www.farmriteequip.com
Page 18 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Martin Equipment Ushers in New Era of Female Leadership
DeLene Martin Bane, president of Martin Equipment of Illinois.
Martin Equipment of Illinois Inc., a multi-location John Deere dealership specializing in heavy construction and forestry equipment, announced its newest era of leadership. The fourth-generation, family-owned company has secured certification as a Women’s Business Enterprise by the Great Lakes Women’s Business Council (GLWBC), a regional certifying partner of the Women’s Business Enterprise National Council (WBENC). “My great-grandfather started our business relationship with John Deere in 1926,” said DeLene Martin Bane, president. “As the fourth generation, I was humbled to take the reins and continue our family’s legacy of legendary customer support. The construction
industry is heavily male dominated, and I am proud to be one of the few women business owners. This certification allows us to be an approved woman-owned business for companies committed to supplier diversity. Even more importantly, I hope it demonstrates to my daughter and all young women that the only limits that exist are the ones we put on ourselves.” WBENC’s national standard of certification implemented by the GLWBC is a meticulous process including an in-depth review of the business and onsite inspection. The certification process is designed to confirm the business as at least 51 percent owned, operated and controlled by a woman or women. By including women-owned businesses among their suppliers,
corporations and government agencies demonstrate their commitment to fostering diversity and the continued development of their supplier-diversity programs. About Martin Equipment Martin Equipment is a John Deere construction and forestry dealer headquartered in Goodfield, Ill., with nine locations across Iowa, Illinois and Missouri. Martin’s commitment to service was established in 1926 with the opening of Sam F. Martin Implement in Roanoke, Ill. With historic developments in earthmoving and forestry equipment, a new era with tremendous potential for growth began in 1981. Under the leadership of Bob Martin Sr., Martin Equipment of
Martin Equipment is a fourth-generation, family-owned John Deere construction and forestry dealer headquartered in Goodfield, Ill., with nine locations across Iowa, Illinois and Missouri.
Illinois Inc. was formed as an authorized John Deere Industrial dealership, focusing specifically on construction, utility and forestry equipment. In 1998, The company continued to live up to its heritage under the leadership of Bob’s son, Bob Martin Jr. Starting in 2018, DeLene Martin Bane assumed leadership, and now with more than nine decades of experience, 200 employees and nine locations, the company is dedicated to customer success by providing a wide range of equipment, parts and support. For more information, visit meoi.com.
About WBENC Founded in 1997, WBENC is a leader in women’s business development and a third-party certifier of businesses owned and operated by women, with more than 13,000 certified Women’s Business Enterprises, 14 national regional partner organizations and more than 300 corporate members. More than 1,000 corporations representing America’s most prestigious brands as well as many states, cities and other entities accept WBENC certification. For more information, visit wbenc.org.
Exodus Machines Expands, Now Known as ‘Exodus Global’ Exodus Machines announced an organization name change to Exodus Global to reflect its expanding manufacturing operations. Exodus Global is a privately held, local family business that includes a group of companies — ShearCore, BladeCore, OilQuickUSA and Connect Work Tools. With deep ties to Superior, Wis., Exodus Global has invested in modern equipment and a manufacturing facility along the shores of Lake Superior. “Exodus Global seemed like a natural fit as we pay homage to our past of building Exodus material handlers and look forward to the future of building a world-class organization with ties across the globe,” said Kevin Boreen, CEO of Exodus Global. “Our companies have done a great job of building a strong presence of our U.S. man-
ufactured Fortress line in Australia, Canada and Europe. We are also the sole distribution partners of premier products into the United
States from the United Kingdom, Sweden and South Korea.” From its inception in 2008, Exodus
Global has continued to evolve and thrive in the construction, demolition, scrap and recycling industries. ShearCore manufactures the Fortress mobile and demolition shears. BladeCore offers replacement blades for mobile and stationary shears and is the exclusive blade provider of Fortress shears. Connect Work Tools sells hydraulic breakers, compactors, grapples and pulverizers. OilQuickUSA is the United States distributor of the OilQuick Automatic Quick Coupler. Exodus Global and its companies also provide service for all its products and house parts in its 90,000 sq. ft. manufacturing and warehouse space. Exodus Global employs more than 85 people with the majority of the team located in the upper Midwest. For more information, visit exodusglobal.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 19
Page 20 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Indiana’s West Lake Corridor Project Sees Funding Boost The U.S. Department of Transportation’s Federal Transit Administration (FTA) on Oct. 28 announced a $354.6 million grant agreement with the Northern Indiana Commuter Transportation District (NICTD) for the West Lake Corridor Project. The project will improve transportation options for Lake County, Ind., residents traveling to downtown Chicago and South Bend International Airport, while reducing travel time and spurring economic development. “This $354.6 million federal infrastructure grant will better connect northern Indiana residents to jobs, education and critical services,” said U.S. Transportation Secretary Elaine L. Chao. The West Lake Corridor Project is a 7.8-mi. southern extension of the NICTD’s existing South Shore Line (SSL) commuter rail service between Dyer and Hammond in Indiana, with four new stations. The total project cost is $944.9 million with $354.6 million in
West Lake Corridor Project photo
Officials broke ground on Oct. 28, 2020, for the West Lake Corridor Project in Indiana.
funding committed through FTA's Capital Investment Grants (CIG) Program. “FTA is proud to join our part-
ners in northern Indiana to improve public transportation and support economic recovery,” said FTA Deputy Administrator K. Jane
Williams. “Commuters on the South Shore Line can now look forward to faster and more efficient transit service connecting them to
major employers in Chicago, enhancing opportunities for Lake County residents while encouraging economic development locally.” Williams added that “this federal investment underscores the Trump Administration’s commitment to fund infrastructure which provides an economic boost for northern Indiana, creating jobs that will help these communities recover from the COVID-19 public health emergency.” FTA’s CIG program provides funding for major transit infrastructure projects nationwide. Projects accepted into the program must go through a multi-year, multi-step process according to requirements in law to be eligible for consideration to receive program funds. With this announcement, FTA has advanced funding for 40 new CIG projects throughout the nation under the Trump administration since Jan. 20, 2017, totaling approximately $10.7 billion in funding commitments.
Hitachi IE Taps Syncron for Service Parts Inventory Hitachi Industrial Equipment (Hitachi IE) has selected Syncron Inventory, a core solutions of the Syncron Service Cloud, to optimize the company’s global service parts inventory. Hitachi IE, a manufacturer and maintenance services provider of industrial equipment and solutions, is undergoing an evolution in optimizing its service parts inventory management processes to meet the changing need of its customer base. Previously beholden to disparate domestic and international inventory management systems, Hitachi IE has selected Syncron Inventory as a global platform to help the company establish more sophisticated demand forecasting and planning, to support their global service parts centralization initiatives. “To drive service part inventory success on a global scale a streamlined approach and a proven and tested global service parts management solution are pivotal,” said Keigo Katsumata, parts division director, service business unit, Hitachi IE. “We have evaluated a number of options and selected the Syncron Service Cloud for its ability to deliver a worldwide view of parts operations, easy-to-use and visibility and high-quality support. We strongly believe that Syncron Inventory will be key
“Syncron Inventory enables OEMs to easily centralize their inventory operations and turn their inventory operations into a key asset to overall organizational growth.” Ryu Shinagawa Syncron
to helping us increase customer satisfaction, reduce lost opportunities, improve operational efficiency and exceed our short- and long-term KPIs.” In addition to improving global part visibility around the world and eliminating siloed inventory management processes in the immediate term, Syncron Inventory will allow Hitachi IE to lay the groundwork for long-term business and success. This will provide centralized data to allow the company to optimize inventory and reduce opportunity losses moving forward, according to the company. “Given how complex the ecosystem is, maximizing inventory success is one of the
most challenging pain points for many OEMs,” said Ryu Shinagawa, managing director, Syncron. “Syncron Inventory enables OEMs to easily centralize their inventory operations and turn their inventory operations into a key asset to overall organizational growth. In challenging economic times, this is critical. Hitachi’s decision to continue to invest — especially during a period when budgets are strained for many businesses — in our future together makes us incredibly proud and is further proof of the value Syncron delivers. We look forward to helping them accomplish their short-, medium- and longterm inventory goals and are confident we
will be able to provide the groundbreaking value they’re looking for.” This announcement also marks the expansion of a long-standing partnership between Hitachi and Syncron, as Hitachi IE is now the third Hitachi business division — alongside Hitachi High-Tech (Syncron Inventory) and Hitachi Construction Machinery (Syncron Price) — to select the Syncron Service Cloud. “We are proud to empower the most admired manufacturing brands in the world to optimize and evolve their global after sales service operations to create immediate value and prepare for what’s next. Hitachi is one of the world’s foremost names in manufacturing with each of its business divisions doing some of the most innovative work in the industry today,” said Shinagawa. “So to be able to build upon the success of our relationship by joining forces with yet another standout Hitachi brand is incredibly gratifying and we look forward to the continued growth of this partnership.” For more information on Syncron Inventory, visit Syncron.com. For more information about Hitachi Industrial Equipment Systems, visit hitachiies.co.jp/english/index.htm.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 21
Contact Rollie Aspenson (Used Equipment Manager)
at 608-220-1723 rollieaspenson@ brookstractor.com
See our entire used inventory at www.brookstractor.com Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 2017 JOHN DEERE 670G LC
Stk #C95223, Cab w/ AC, 36" Pads, 13'9" Arm, CWRD, Quick Coupler, 80" Bucket, 3543 Hrs .......... .............................$399,000 WITH WARRANTY
2017 JOHN DEERE 333G
Stk #C95406, Cab/A/C, EH Controls, Air Ride Seat, Hi-Flo, Aux Hydraulic, Ride Control, Self-Leveling, Wide Rubber Tracks, 84" Bucket, 1985 Hrs.............. ..............................................................$41,500
2019 JOHN DEERE 35G
2017 JOHN DEERE 672GP
Stk #C96009, Cab w/ AC, Long Arm, 12" Rubber Tracks, 24" Bucket, Aux Hydraulics, Blade, Hydraulic Thumb ..........................$43,500 WITH WARRANTY
Stk #C93381-2, Cab w/ AC, Tall Cab, EH Controls, 14' Blade, 17.50 Tires, Radials, AWD, Aux Hyds, Front Scarifier, Ripper, 1489 hrs.............................. ..................................$229,000 WITH WARRANTY
2012 JOHN DEERE 410J
2016 CASE 621F
Stk #C95406, 3972 Hrs, Cab/AC, 2WD, Extendahoe, Aux. Hydraulics, Allied Compactor, Allied Hammer, GP Bucket ................................$34,000
2018 JOHN DEERE 844K
2012 JOHN DEERE 250D-II
Stk #U689760, 2643 Hrs, Cab w/ AC, Joy Stick Steer, Ride Control, Front Diff Lock, 29.5 Tires, General Purpose Bkt ..$319,0000 WITH WARRANTY
Stk #C95775, 6517 Hrs, Cab w/ AC / 25 Ton / 6X6 / Tailgate ..............................................$139,000
Stk #C95533, 2430 Hrs, Cab w/ AC, Ride Control, 20.5 Tires, High Lift Boom, New Radials, General Purpose Bkt ..........................................$109,000
2008 ETNYRE RF50TD3
Stk #C95089, Mechanical Folding Gooseneck, 10' Wide, 22' Bed, Air Brakes ........................$25,000
We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.
Page 22 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Dealers Wanted
STRONG. RELIABLE. MULTIFUNCTIONAL. MATERIAL HANDLING MACHINES 12 MODELS - 18–52 TONS
Construction • Transpor t • Infrastructure • Recycling
Over 100 Years Of Quality
MA AT TERIAL HANDLERS ATLAS DEALERS WANTED Tom Hickson, General Manager Cell: 980-616-3738 SMH Group-US
5733 Davidson Hwy, Concord, NC 28027 www.smhgroup-us.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 23
GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113
GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449
www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426
Page 24 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Insurance Biz: Make Construction Surveys Before, After Jobs was responsible for that work.”
ANALYSIS from page 1
damage. But contractors can protect themselves by making pre- and post-construction surveys a regular practice when work is planned. Taking precautions before and during the construction project can help safeguard the site and all contractors involved in it from injuries and damages occurring during construction, as well as any claims made after the project is completed. As Travelers Insurance points out, if damages are claimed, having well documented pre- and post-construction condition surveys, records of all of the work conducted, and any changes requested along the way, can be valuable. Many construction companies may not extend their survey area far enough to cover all potential properties that could be affected by construction activity. “Contractors tend to survey areas that are readily available and obvious,” said Mike Koppang, second vice president, construction claim, in risk control of Travelers, Holden, Mass. “Often, we’re seeing that alleged damages are not at the structures in close proximity to the project, but rather in structures further away and often are not captured in pre-construction surveys.” Protecting Contractor Noise, vibrations, traffic disruption, trash and other nuisances can typically cause issues during construction, said Jason Kolenda, a project manager and geotechnical engineer of EBA Engineering Inc., Laurel, Md. For large earthwork projects such as blasting, mining, deep excavation, groundwater pumping and earthen embankments, construction effects can reach well beyond the construction area, he said. “So there is real potential for damage to nearby structures and property,” added Kolenda. “Oftentimes, however, the damage existed before the construction unbeknownst to the resident.” Whether at fault or not, contractors must expend resources to prove their innocence or, in the case of real damage, accurately document the extent of the damage directly linked to the construction project, he said. This includes any property type — whether commercial facilities, utility pipelines, railways, bridges or roadways. Travelers’ list of key steps a contractor can take before launching a big construction project to help prevent or mitigate damages and protect the company includes the following: Consider the impact of ground vibrations. When evaluating the project, consider
Many construction companies conduct pre-construction surveys to identify and document existing damage to nearby properties before work begins.
Under an engineer’s supervision, a photographer will collect images, video and measurements to document each existing defect.
the type of work and equipment that will be generating ground vibrations, the proximity to adjacent structures, and the type of structures in the area. Assess the potential for damaging vibrations and be prepared to stop work and reassess other options to prevent damage. Take into account the human perception zone, suggested Koppang. “If people perceive vibrations, they may allege damages, even if they were outside the possible damage zone for ground vibration activity.” Construction companies can develop measures to help mitigate against damages caused by vibration-generating work, suggested Travelers. Proven methods to reduce ground vibrations from construction equipment exist and should be considered.
Keep good records. Having a formal project documentation policy in place prior to starting projects is important. The policy should include written procedures to track changes and written approvals throughout the construction process. Construction defect losses can be reported several years after a project has been completed. Therefore, project documents can be critical to understand years later what happened and why it happened. Changes can occur quickly during a construction project and at times, fully documenting the details of these changes does not occur. Retaining and finding the right documentation is important, Koppang said, “as it can explain why the as-built conditions differ from original design documents and who
Conducting Pre-Construction Survey American Family Insurance’s loss control division urges all contractors to make preconstruction surveys a part of the construction project planning process. This is critical especially where certain construction operations are planned. Surveys should include excavation and trenching phases; pile driving; use of heavy construction equipment close to other structures, dewatering operations, underpinning, and blasting or demolition. The main purpose of a pre-construction survey, according to American Family, is to develop a rough layout of the site. Location of the proposed structure and adjacent structures; location and condition of any existing structures or monuments, existing roads and parking lots to be retained should be documented. All utility lines, gas lines, phone lines or cable lines near the proposed construction area are important to note, as are all existing objects to be demolished, and any existing trees or vegetation to be retained. “The planned construction activities and the degree of exposure to the surrounding area determine the need for and extent of the survey,” said American Family. “The contractor should note that the actual field conditions are not always clearly identified and changes should be anticipated.” Surveys also may identify potential problem areas that contractors should consider in pre-planning jobs. If any structures or utilities adjacent to a construction project are alleged to have been damaged during construction work, another survey should be made at the completion of the work. American Family believes this survey should be compared with the initial survey to determine if any damage was caused by the contractor’s operations. Who Should Conduct Survey? The insurance company also suggests a qualified independent consulting engineer make pre-construction surveys. Written, accurate, dated reports should be kept for future reference. The timing of a pre-construction survey is important. For example, if the contractor uses its own crews for an entire sewertrenching project, including all blasting, a survey should be made before the work starts. Damage could be caused by blasting vibrations or ground settlement. The problem becomes more complex if other contractors are working in the same area. see ANALYSIS page 90
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 25
2015 Case 821F, 2,434 HRS, EQ0004257, Kansas City, MO ......................................$198,500
2019 Case TR270, 23.7 HRS, EQ0009453, Kansas City, MO ....................................................$48,900
2015 Case 580SN Backhoe, 979.50 HRS, EQ0004326 ................................................$84,900
2019 Case CX130D, 304.7 HRS, EQ0010984 ........ ................................................................$149,900
2015 Case 580SN WT, Pilot Controls, 1180 HRS, EQ0004234, Kansas City, MO ..................$79,000
2014 Case CX300C, 2010 HRS, EQ0003165, Kansas City, MO ......................................$174,900
2014 Case SR210, Mechanical H Pattern, 1,000 HRS, EQ0003198, Garden City, KS ..........$31,850
2006 Case 580M II Loader/Extendahoe, EQ0010281 in Garden City, KS. ....................................$29,500
Page 26 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Education Foundation Scholarship...
IAAP Announces 2021 Scholarships The Illinois Association of Aggregate Producers (IAAP) Education Foundation Scholarship program strengthens the Illinois aggregates industry by promoting the education of worthy students. The Education Foundation scholarship supports students learning and training to be the next generation of professionals in the industry. The Joanne Kluessendorf Memorial scholarship promotes the education of individuals seeking a career in teaching earth science or geology. For 2021, the IAAP Scholarship Committee will award up to five scholarships of at least $2,000 each. These scholarships are a one-year grant. Students may re-apply in subsequent years. The application deadline is Jan. 4, 2021.
2006 Kobelco SK250LC 9350 hrs, New undercarriage, New 48" bucket & bucket pins/bushings $56,000 618-435-2330 Benton, Illinois WWW.BRTRACTOR.COM
Requirements • Applicant must be a high school graduate, or will graduate the year applying, and be pursuing undergraduate work only, on a full-time basis, at an institution of higher learning (hereafter referred to as college). • Applicant must be majoring, or intends to major, in a curriculum which will be compatible with a career in the aggregates industry such as (but not limited to) civil engineering, engineering science, environmental engineering, environmental science, geology, geological engineering, mineral science or mining engineering. • Applicant must have a grade point average of at least a “B”. An application from a student with less than a “B” average may be considered in exceptional circumstances.
In order to be considered for an IAAP Education Foundation Scholarship, applicant must submit the following information: • Completed application form. • Official college transcript if applicant is now in college. • If applicant has been in college for one year or less or is still in high school: official high school transcript including ACT or SAT scores. Applicants also must submit an original essay with the following information: • Outline interest in and/or connection to the Illinois aggregates industry; • how chosen field will apply to work in the Illinois aggregates industry; • applicant’s goals; • where applicant plans to attend college; • why applicant chose to apply for this scholarship; and • explain financial need for the scholarship. Students should not submit the same essay the next year. Submit completed applications to: IAAP Education Foundation, 1115 South Second St., Springfield, IL 62704. All applications must be received on or before Jan. 4, 2021. Incomplete applications and applications submitted after the due date are subject to rejection. The Scholarship Committee reviews the applications and interviews eligible applicants. For more information, visit iaap-aggregates.org/education-foundation-scholarship.html.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 27
Ed McKeon
Judy Nixon
John Pinkerton
Ted McKeon
Theresa Vickers
Matt Seslow
Joe McKeon
Jennifer Hood
Richard McKeon Barry McKeon
Cathy Printz
Teddy McKeon
Martine Matteo Caitlin Murphy
Kent Hogeboom
Anne Shoemaker
Rich Olivier
Maria McKeon
Ed Bryden
Donna Prendergast
Patrick Kiel
Deby Hogeboom
Dennis Hogeboom
Denise Giaccio
Rob Tredinnick
Joshua Phillips
Mary DeRosa
Andrea Pinkerton
Sharon Swanson
Stephen Collins Craig Mongeau Rob Chakler
Sondra Rossi
Katherine Devlin
Jack McAndrew
Mia Klimp
Page 28 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GREAT HOLIDAY GIFTS! Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $155
Bobcat 743 Skid Steer Loader, 1:25 scale - $45
Bucyrus Erie 22-B Dragline, 1:50 scale - $285
Bobcat 225 Compact Excavator, 1:25 scale - $55
Terex 72-71 Wheel Loader, 1:40 scale - $250
Sakai TS150 Asphalt Compactor, 1:40 scale - $50
Terex 82-50 Dozer with Ripper, 1:40 scale - $250
Mack Granite Tractor with Lowboy Trailer, 1:34 scale - $125
Caterpillar D10 Track-Type Tractor, with Ripper, 1:70 scale - $30
Caterpillar 992G Wheel Loader, 1:50 scale - $75
Bantam C-35 Cable Backhoe, 1:25 scale - $175
Caterpillar 613C Elevating Scraper, 1:64 scale - $40
Case W20C Wheel Loader, 1:35 scale - $80
International TD-25 Crawler with Side boom & Counterweights, $150
Shipping and Handling Included
Drott 50 Excavator, 1:35 scale - $175
Liebherr L522 Wheel Loader, 1:50 scale - $50
WE PURCHASE COLLECTIONS!!!
Bmckeon Collectibles
Contact – Barry McKeon
470 Maryland Drive Fort Washington, PA 19034
610-506-5961 Email – bmckeon9@gmail.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 29
For per formance you can depend on s parts. Choose genuine Petatrekorinin another state
downtown, ups Whether the jobsite is nd distributors o r e th a n 8 0 d e a l e r s a m e altogether, there ar chines going strong. keep you and your ma across the countr y to
STOPS FUEL GELLING NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wraps around the filter housing and reduces or eliminates the possibility of cold weather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternating current or a convertible model combining dc and ac. A standard 12V or 24V Universal Fuel Filter Preheater is priced at $138.
BULK FUEL STORAGE FILTER HEATER The newest Diesel Fuel Filter Preheater fits 3.5" to 4" diameter by 7" to 10" tall filters. Stops diesel gelling in the filter so that fueling equipment can proceed even in the coldest temperatures. 120v with thermostat. $225.
The ‘peel & stick’ Universal Preheater attaches to the bottom or the side of the oil pan and converts the housing into a heat transfer element. It warms the oil without burning it making cold starts easy. It can be used on gearboxes, transmissions, transfer cases, water tanks and even bulk oil tanks. The Preheater plugs into any 120 or 240 volt outlet and consists of a thin silicone fiberglass pad containing a metal grid. To install it, you clean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edges of the pad and place a flexible ceramic insulation pad over it. It is available in several models depending on the lube capacity. A 50 watt unit sells for $44 and a 350 watt unit sells for $133.
PO Box 83, North Aurora, IL 60542-0083
630-966-8992 Fax: 630-801-9569 sales@etipinc.com • www.etipinc.com universalpreheater.com (Veteran Owned Small Business)
Scan here to find out more
w w w.perkins.co om/de d pendonperkins
* Minimum 12 months warranty on all genuine Perkins par ts including reman and power exchange. Extended warranty is available through your distribu b tor.
Page 30 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Pages 31-47
Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
McCloskey System Offers Solution for Barton Malow Project When Maverick Environmental Equipment’s Tim Smith received a call from Kurt Kremer of the Barton Malow Company regarding site work for the new Ultium Cells LLC facility in Lordstown, Ohio, he was quick to react. Within an hour, he was on site reviewing the work required to construct the new $2.3 billion battery cell manufacturing plant located on 158 acres immediately east of a former GM assembly plant. Ultium Cells LLC is General Motors and LG Chem’s newlycreated joint venture, developed to mass produce advanced battery cells, with a goal of advancing electronic vehicle production and consumer acceptance by reducing battery costs. GM plans to put the Ultium batteries in its new Cadillac Lyriq electric cars and new electric Hummer sport utility vehicle. Ultium Cells LLC forecasts that production at the nearly 3 millionsq.-ft. plant will commence in early 2022 and anticipates creating more than 1,100 new jobs in northeast Ohio. Barton Malow, a general contractor and construction management company headquartered in Southfield, Mich., specializes in building industrial, health care, educational and special-event facilities. The company has a total of 15 branch operations with locations ranging from Illinois to Florida. As the general contractor in charge of construction on the Ultium project, Barton Malow is responsible for all aspects of the work except electrical and HVAC. Maverick Environmental Equipment, headquartered in Alma, Mich., with a branch in Newbury, Ohio, seemed like a natural choice to design and provide portable equipment for a crushing and screening spread to handle the site
The crushing and screening spread working at the future site of the Ultium Cells LLC plant in Lordstown, Ohio, includes this McCloskey I44V3 impact crusher paired with a McCloskey R230 mobile screener.
prep work. Maverick began operations in 2016 when industry veterans Tim Smith and Charlie Stahl, joined forces to build their own company. The company is focused on providing machinery-based solutions for environmental applications, including aggregate processing, waste recycling, forestry and biomass. Maverick is Michigan’s authorized dealer of McCloskey International, McCloskey Washing Systems, Komptech, Eagle Crusher, Eagle Iron Works, and U.S. Pride Products. Maverick also covers Ohio for McCloskey International, McCloskey Washing Systems, Komptech and U.S. Pride Products from new locations in Newbury and Bremen. Job Aspects Site work involved preparing a base for the factory’s 60-acre footprint as well as infrastructure
requirements for the surrounding land, requiring a massive development effort. Ultimately the base for the factory will consist of crushed virgin sandstone excavated and processed on site to be set at a depth of 20 ft., followed by 12 in. of limestone and topped off with 2 in. of limestone screenings. Dirt excavated from the site also required screening for use as topsoil for the facility grounds. Smith’s design for the spread included: • one McCloskey I44V3 impact crusher • one McCloskey 144V2 impact crusher • two McCloskey R230 screeners • two McCloskey ST100 tracked stackers • two McCloskey ST80 tracked stackers • two Lippmann-Milwaukee LTS-100 tracked stackers McCloskey I44V3 Impact Crusher The new portable McCloskey I44V3 has been redesigned with input from McCloskey customers worldwide. The new design with a direct drive rotor and enhanced material flowpath has produced a high-quality, high-production crusher, with lower fuel and O&O costs. The I44V3 has been designed and built to meet the demands of asphalt recycling, concrete recycling, rock crushing, construction and demolition materials.
(L-R): Maverick Environmental Equipment’s Tim Smith, joins Nick Hebel, Barton Malow civil superintendent, and Maverick Environmental Equipment’s Craig Kaser to talk about the next phase of operations at the site.
McCloskey R230 Mobile Screener With a setup time of 10 minutes, the R230 mobile screener is designed for stand-alone operations, or as the primary scalping component in a crushing and screening spread. see MCCLOSKEY page 40
Page 32 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Illinois
Indiana
Kentucky
Minnesota
Midwest Crushing & Screening
Powerscreen Indiana, Inc.
Powerscreen Crushing & Screening
Theco, Inc.
7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com
847.271.5027
255 N. Hetzler Court Angola, IN 46703 www.powerscreenindiana.com
260.665.5816 • 800.843.4277
11901 Westport Road Louisville, KY 40245 www.powerscreensales.com
800.227.0534
14833 164th Ave. S.E, Big Lake, MN 55309 www.thecoinc.com
763.263.0505
Michigan & Ohio
Missouri & Kansas
AGGCORP
Powerscreen Central
22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net
9001 Hickman Mills Drive Kansas City, MO 64132 www.powerscreensales.com
614.309.6854
502.326.9300
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 33
2019 Komptech Crambo 6000 Low Speed Shredder, SR#469125, 550 Hrs $639,000
2020 Lippman LTS-100 Wheeled Radial Stacker, SR#90187, 575 Hrs $104,900
2020 BOSSTEK DUST BOSS DB-60 FUSION 60 METER DUST SUPRESSION, SR#2686, 8 Hrs $109,000
2011 MORBARK 3800XL WHEELED HORIZONTAL GRINDER, SR#191-1011, 2331 Hrs $359,000
2016 MORBARK 3800XL TRACKED HORIZONTAL GRINDER, SR#191-1057, 1857 Hrs $459,000
2018 MCCLOSKEY ST80 WHEELED 36”X80’ STACKING CONVEYOR, SR#89571, 95 Hrs $76,500
2019 MCCLOSKEY 516RE WHEELED 5X16 TROMMEL SCREEN, SR#89946, 764 Hrs $179,000
2019 MCCLOSKEY ST80T TRACKED, 36”X80’ STACKING CONVEYOR, SR#90210, 640 Hrs $91,500
2018 MCCLOSKEY R155 TRACKED 5X16 HEAVY DUTY SCREENER, SR#89496, 1244 Hrs $229,000
2018 MCCLOSKEY 628RE WHEELED 6X28 TROMMEL SCREEN, SR#86793, 163 Hrs $259,000
2017 MCCLOSKEY I44V2 TRACKED 42”X43” IMPACT CRUSHER, SR#86917, 1526 Hrs $349,000
2020 MCCLOSKEY C2 TRACKED CONE CRUSHER, SR#90600, 520 Hrs $489,000
2020 MCCLOSKEY 144V3HD TRACKED 42”X43” IMPACT CRUSHER, SR#89613, 1500 Hrs $449,000
2021 MCCLOSKEY S190-3DT RINSER, 5X20 – TRACKED 3 DECK RINSER TBD, NEW CALL FOR PRICE
2021 MCCLOSKEY S190-2DT 5X20 - TRACKED 2 DECK SCREEN, SR#91333, NEW CALL FOR PRICE
2018 MCCLOSKEY R230 TRACKED 6X20 DUAL POWER HD SCREENER, SR#88406, 2050 Hrs $249,000
Page 34 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Take A the S dvantage Dedu ection 1 of ct 7 in Yo ion to Inv 9 ur Co e mpan st y
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 35
Page 36 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
FAE-Primetech PT Prime Movers Reduce Wildfire Potential Forest fire fuels reduction in California is an evolving and developing process. Just as this process is becoming more important than ever, the machines contractors use to get the job done is just as important. Machine characteristics contractors consider when purchasing a machine for fuel reduction include: Reliability — can the machine hold up with minimal down time; Maneuverability — grade and slope capability while maintaining operator confidence; Production — How many acres per hour can be cleared and where can production be accomplished; Finished product — The ability to determine the final size of the finished product; Comfort/confidence — The ability to confidently operate the machines all day in a safe and quiet cab that is OSHA approved for low noise and high-quality air standards; Support — this includes parts availability, dealer and manufacturer technical support and information, and rapid service support. Jim Cunningham of Global Machinery, an FAE dealer located in Sacramento, Calif., and an industry expert at matching a situation with the right machine and attachments, said the challenge for contractors who do the grinding for forestry fuels reduction on the West Coast are limited with the hours they can work based the Daily Project Activity Level (PAL), which is based on the weather conditions and the moisture levels that impact the level of fire risk. Cunningham added that in the fire areas, when the temperatures can reach up to 90F and it’s a windy day, the gusts are very heated and do not provide a reprieve from the high temperatures, which add to the fire danger. These high winds also can easily take the tops off trees, especially in areas like the Sierras. These treetops dry out on the ground and add to the forestry fuel. Add high winds to a fire, and a rapid spread is encountered. As far as forest health, according to Cunningham, it all comes down to water. The small trees, under-brush and fallen treetops rob the larger trees of rainwater. When tall trees don’t have enough rain, they cannot produce enough sap to battle the tree beetles. The tree beetles then decimate the trees and the forest, resulting in dry dead trees and heavy underbrush. Brad Kingsley, owner of Kingsley Grinding, has seemingly found one of his main “go-to machines” for forestry fuels reduction with the purchase of an FAE Primetech PT-175. This is one of the more compact and versatile prime movers on the market that he purchased from Cunningham of Global Machinery. Kingsley was working on a job for private land owners while he was actively engaged
Red Mountain Resources’ FAE-Primetech PT-300 clears brush to open up areas for “hand crews” to come in and do their work.
in cleaning up an area that had previously been affected by the King Fire of 2014 which, many years later, is still considered a burn scar. Kingsley was tasked to clear away the ground vegetation and any dead and/or
dying trees that may be of a future fire hazard. The burn scar is extra dusty and becomes a challenging site with regards to visibility while working in the area. The PT175 prime mover has been a tremendous
After making "quick work" of numerous acres of forestry fuels mulching, 3 FAE Primetech PT machines await transport to their next site.
asset on this project and many others that Kingsley is engaged in. Joe Garrett of Garrett Forest Management, El Dorado County, Calif., has been in business for more than a decade working with private landowners and a few federal and state agencies in fuels reduction projects. His crews go through and “drop, then thin” small trees and vegetation with an FAE UML HY Bite Limiter excavator mulcher and pole saws and then finish grinding everything with their skid steer with an FAE UML SSL 150 VT drum mulcher, both units purchased from Global Machinery. “Fire prevention and forest health go hand in hand,” said Garrett. “Unfortunately, it usually takes the fires to get going before people think about the health of their property.” When asked about his fire mitigation projects and if they’ve proven to save properties when fires came in close proximity, Garrett said, “Most definitely, we’ve done thousands of acres across El Dorado County. Being a small county, you either know or get to know the firemen who respond to these fires. Word gets around when you created the anchor point for them to set up and back burn to save some houses. “Our work sells itself,” Garrett added. “We’re never going to be able to prevent the fires with what we do, but by totally removing the understory and improving the forest health, we can help keep the fires on the see PRIMETECH page 46
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 37
www.aisequip.com m 33600 N Grand River Av Ave L i Lansing, MI 48906 48906 5177--321-8000
Sa aginaw 4600 46 00 AIS Drive Di Bridgepo ort, MI 48722 722 989-777 9897777-0090 0090 Grand Rapids Travverse City 600 44th Street SW 8300 M-7 -72 East G Grand Rapids, MI 49 49548 Williamsb burg, MI 4969 49690 231--2267 267-5060 616-538538--2400 West s Detroit Northeast Detroit 56 6555 Pontiac P Trail 65809 Gratiot Av Avenue New Hud dson, MI 4816 655 Leno ox x, MI 48050 248--4377--8121 586--7727 27--750 5022 800-4 457 57--8121
www.butlermachinery.c y com 3402 02 36th St SW Fargo, ND 58014 701--2280-3100 800--7726--77475 3630 Miriam Av Ave Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-4 45656-1400 1201 S 46th St Grand G d Forks, F k ND 58201 701--77 7775-4 4238
1505 Hwyy 2, Bypass E Minot, ND 58701 701-8 852-3508 4950 E High Highway 12 Aberdee en, SD 5774 401 60505--22 225-6 62240 3601 Deadwood Av Ave N Rapid City C , SD 57770 02 60505-34 42-4850 2-4 2057 0571 Tru uck Stop A Avve Pierre e, SD 57750 501 60505--22 2244-5400 3201 N Louise Av Ave Sioux Fa alls SD 5771107 alls, 605--336-3010
www.centralsands.co om 4219 E 50th St • Des Moines, IA A 50317 50 800--2247 47-2400 • 515-964-8 8600
www.rbscott.com 1011 Short St • Eau Claire, WI 54 47701 715-832-9792
www.roadbuildersmachine ery.com y 1001 S 7th St Kansas City, KS 913-371-3822 4115 S 90th St Omaha, NE 4022-331-9 92200
5601 Fle etcher Av Ave Linccoln, NE 40202-3325-044 477 4949 49 Ju Juer uergen Rd Grand Island, NE 308-3384--2620
1303 S Chestnut St Norfolk, NE 40202-316-4640
A solution for every v y production ch hallenge Metso Outotec has delivered dependable solutions for o demanding anding aggregate applications the past 150 years,, including crushers, screens, feeders, trackmounted and d whee elmounted units, stationaryy plants and automation n …•ˆ„Ž—‹•’˜Š‹–ě ‹ˆ Ť•–— ˆ—–’ ’Ž’—•„†ŽĹ?Ę Â?„‡ˆ Œ‘ ÄşĹ‚Ĺ ÄżÄ˜ is still in everyday use. Backked ed d by OEM spare and d wear partts, main i tenance and nd •ˆ“„Œ•–Ę ˆ›—ˆ‘‡ˆ‡ š„••„‘—Œˆ– „‘‡ ‰˜Â?Â? Œ‰ˆ œœ†Â?ˆ ˆ•™Œ†ˆ–Ę we tak ake e your business personally. ˆ„•‘ Â?’•ˆ „— Â?’Š•’˜“솒Â? —’‡„œě
mogroup o .com
Special Retail Finance Program now through December 30, 20 0220: • 0% interest, 24 months • 1.99% interest, 48 months Contact your distributor for details!
Page 38 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
New Appointments...
Terex Materials Processing Announces New Leaders 573-635-8700 • 888-972-2537 • www.rackersequipment.com
#141147-"NEW" RDO 5x12 2-deck screener with CAT C-4 water cooled engine. Remote control for feeder. Ball deck and grizzly hopper (no grizzly). 2-30" side discharge conveyors. Mounted on tandem axel 5th wheel chassis. #920000- 2002 Con-E-Co Mobile Central Mix Concrete Plant 300 TPH. Includes: 12yd agg batcher, (3) 60yd agg bins, mixer charging conveyor, 595 BLL split silo, cement/flyash batcher, PJ-500 dust control, (3) 30”x82’ portable conveyors.
#510113 (2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4892 hours) & HD-709 drifter (2203 hours). Set up for T-45 Steel (14′ starter & 12′ changes). Has anti-jam circuit and dust collector. One-owner machine and all service records available. Well maintained and in very good condition.
#111070 Pioneer 2854 jaw crusher with 50x18’ VGF and electric motor all on a 3-axle chassis. Good condtion.
DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510116-Furukawa 15ED Hydraulic Rock Drill. Has twin Isuzu engines. 5667 hours on hydraulics, 4413 hours on compressor, and 5992 impact hours. Very good undercarriage. Enclosed cab w/ AC and heat. Dust collector, auto rod changer. Set up for T51 rod. Overall good condition. #510087-Furukawa 9E hydraulic drill with Isuzu diesel engine. 10764 engine hrs, 4619 impact hrs. Anti-jam circuit, dust collector, uses T-45 steel, 14 ft starter with 12 ft changes. Good condition. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.
#154006 "New" Aggretek portable wash plant w/ 6x20 3-deck screen and twin 36"x25' sandscrews complete with electric motors, electric box and starters, wire cloth, and NiHard shoes, all on a 3-axle chassis.
#161003 (New) Willis 36”x75’ Radial Stacker with folding head/tail sections, pintle hitch, 20hp electric motor, #6 gearbox, 3-ply belt, 35 degree idlers, and 5” Cema C idlers.
JAWS & IMPACTS #111063-Terex Pegson 1180PT 32"x44" selfcontained jaw plant w/ operator-controlled track maneuvering. Large feeder w/ step grizzly section, grizzly pass-by chute, & discharge conveyor. Plant is currently in use & has approx 5082 (04/21/17)hrs. Very good condition. #111071 Trio 12x52 portable jaw with 42"x16' vibrating grizzly feeder with 6' of grizzly. John Deere diesel engine with 1,208 hours. 36" underconveyor with magnet, all mounted on 3 axle chassis. #112007-Kennedy Van Saun 3648 single rotor impact with electric motor & Deister 50”x18’ VGF on 3-axle chassis. #112044-Nordberg LT-1213 Track Mounted Impact. with 42”x12’ VGF, 36” cross belt magnet, and 46” underconveyor, good condition.
#152028-(NEW) Aggretek 36 X 25 Single Fine Material Washer. with 15hp electric motor and includes Nihard shoes, adjustable legs, catwallks, stairs, guards, and operator platform. In-stock and ready for shipment.
#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.
#510115 Furukawa 1200ED hydraulic rock drill with 12,206 overall hrs & 3154 hours on Cummins 6.7 remanufactured engine. 5776 impact hrs but only 39 hours on drifter reseal. Includes cab with a/c & heat, dust collector and an anti-jam circuit. Good condition.
#410070-CAT D6R dozer with 10' straight blade with good cutting edge. Has EROPS cab with air. Glass all good. 22" single grouser pads, overall condition of undercarriage is 60%. Pins have tit on drive side. Has 4600 hrs. SCREENS #141120-Nordberg 6x20 3-deck incline screen with ball tray on bottom deck. No motor, but was a running take out. Good condition.
SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 EARTHMOVING bar rotor. No power. Crusher is in good condition. #810134-Euclid R-35 truck has an engine #121053-Cedarapids 5040 Hammermill secthat is a Detroit diesel V12 with an Allison ondary crusher with 5x16 3-deck screen. Has 6-speed automatic transmission. The tires are 1800x33 all in good condition about 50%. rotovator, 36" return and 36" front discharge Bed liner looks good as does the remainder of conveyors. All mounted on tandem axle chassis. Plant is all electric except the hammermill FEEDERS the truck. No leaks. Runs good. is diesel jack shaft driven. No power on mill. 134001-Peerless 12 cubic yard hopper #810137 1977 Caterpillar 769B Rigid Frame Power unit and control panel are available sepwith 42 belt feeder (2015), 5hp electric motor Haul Truck with Cat D343 engine (10,314 arately for $12,000. Engine runs, but needs to with electric panel in very good to excellent hours). 18.00-33 tires approx 50%. Bed is in be rebuilt. condition. good shape. Truck runs and operates good. #123025-Portable Telsmith 48" STD cone w/ #132015-Continental Gin 48"x25.5' apron #410063-CAT D9H w/ EROPS cab w/ A/C, 30" feed conveyor w/ 20 HP motor, Dodge feeder. Large feed box. Flights are approx straight blade w/tilt. Single shank, 4-barrel rip- TDT5 reducer, 36" undercrusher conveyor w/ 80+%, good sprocket, & jackshaft drive gears. per. 24" pads. U/C (overall approx 70%). WEG 20HP electric motor. Cone has 125HP 60hp motor and gear box, but has removable Rebuilt engine, trans, and finals (HMR 2994) 1150RPM motor, mounted on factory tandem mount (for transport). Heavy duty apron feed- Left Trunnion is available but needs to be axle chassis. Good brakes, very good rubber. Good running cone. installed. Overall good condition. er. Shipping dims: 8' 7" tall & 30' long.
Jefferson City, MO 65110
Terex Materials Processing announced the appointments of Matt Dickson as business line director of Terex Finlay and general manager of the Omagh site, and Barry O’Hare as business line director of EvoQuip. Pat Brian, VP and managing director, mobile crushing and screening, said, “Matt Dickson has a successful commercial and engineering background — experienced not only in sales and global distribution growth with entry into new markets but with a strong technical aptitude for our equipment. "For the past four years he has led the EvoQuip business, taking it from its inception to becoming one of the world’s top three brands for compact mobile crushing and screening equipment." Before that, Dickson worked for Terex Finlay in Omagh for more than 10 years, culminating in the role of engineering director. "We are confident that Matt will be warmly welcomed back into Omagh Matt Dickson and equally by the Terex Finlay dealer network as they work together to expand director of Terex Finlay, will transition to director of strategic sourcing, Terex the Terex Finlay business globally.” Paul O’Donnell, previous business line Materials Processing. “During his time with Terex Finlay, Paul has overseen an impressive period of growth of the brand as well as the expansion of the Omagh facility into the Centre of Excellence for the design and manufacture of mobile crushers. We thank Paul for his vision, dedication and leadership and wish him every success for the future,” Brian said. Commenting on O’Hare’s appointment to business line director of EvoQuip, Brian said, “Barry has a wealth of experience in the crushing and screening industry, having worked in several positions for Powerscreen and Terex MPS over the past 12 years. Through his most recent role, Barry has guided the strategic and operational sales activities for EvoQuip and led the development and management of territory sales. We are confident that Barry is well placed to take EvoQuip into its next exciting phase of growth.” For more information, visit terex.com/en/materials-processing. Barry O’Hare
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 39
CRUSHING
MA ATERIAL TERIAL HANDLING HANDLING
SCREENING
TRACKS
WASHING W ASHING & CLASSIFYING
L
X
6
R
6WHSNH &W Traverse, MI 49 685 231- 943 - 3700 )D[
3RQWLDF 7UDLO 1HZ +XGVRQ 0, 48165 248 - 356 - 5200 )D[
2OG 6 *D\ORUG 0, 989 -731- 9988
( 0LOH 5RDG 6WHUOLQJ +HLJKWV 0, 0, 48312 586 - 474 - 5063
The complete sour s ce for equipment in the aggregate, construction ction and recycling indu ustries. Offering industry--leading brands such as the Pioneer Jaw Crusher, Kodia ak® Plus Cone Crusher, Supe erStacker® ® ® ® Extendable Stack ker, ProSizer Mobile Screening Plant, Combo Screen, Vari-Vibe a High-Frequency Scr S een, Duo-Vibe® High-F Frequency Screen, Series 90 000 equipment, Fast Trrax, Gllobal Trrack and FastPack.
www.kpijci.com
Page 40 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Crew Works to Keep Up With McCloskey Crusher, Screener MCCLOSKEY from page 31
Powered by a 225 hp (168kw) diesel engine, the R230 is capable of high output levels while delivering high-quality screened products and features a 20-by-6-ft., twobearing screen box, adjustable flow speed and comes with a direct feed Hardox lined hopper as standard equipment. McCloskey ST100 Tracked Stacker McCloskey’s ST100 tracked stacker is a mobile unit with a large feed hopper and a production capacity of up to 800 tph. With a 36 in. by 100 ft. heavy-duty main conveyor belt and a maximum 22.5-degree conveyor angle, the unit accommodates outstanding stockpiling capabilities of up to 40 ft. 7 in. The McCloskey ST100 tracked stacker is powered by a 74-hp diesel engine; sets up in five minutes; and its straightforward hydraulic controls to fold or unfold and raise and lower the conveyor offers easy and efficient operator functionality. McCloskey ST80 Tracked Stacker McCloskey’s ST80 tracked stacker is a 36 in. by 80 ft. stacker unit with 74-hp diesel power as standard equipment; hydraulic main lift; and hydraulic top fold. The 22.5degree max conveyor angle provides enhanced stockpiling capabilities while delivering a production capacity up to 650 tons per hour. Lippmann-Milwaukee LTS-100 Tracked Stacker The LTS-100 tracked stacker offers quick set up time and a production capacity of 800 tph. Its 22.5-degree maximum conveyor angle delivers increased stockpiling. Its rugged truss frame and large feed hopper are designed to withstand harsh working conditions while delivering maximum output and efficiency. The unit comes with 74hp diesel power as standard equipment. Setting Up According to Nick Hebel, Barton Malow’s civil superintendent, after accepting Maverick Environmental Equipment’s proposal, the dealership proceeded with speed and efficiency to get the equipment on site, set up and ready to work. According to Smith, the Ohio EPA worked quickly on permitting for the equipment, which helped move the process along. The Ultium Cell LLC facility was the first time Hebel worked a crushing operation and he found that the team at Maverick Environmental Equipment was extremely helpful, providing training at its Newbury, Ohio, facility and has continued to be extremely responsive in addressing maintenance issues and operational expertise.
Crushing Progress As a resident of Michigan working for an extended period of time in Ohio, Hebel has been eager to complete the job at the site as soon as possible. To achieve this, the Barton Malow crew has worked two shifts for three months. Hebel stated that the equipment has run smoothly throughout, and they’ve averaged more than 500 tons per hour on the job site. Work commenced at the site on May 1. By early September, Hebel estimated that the company had crushed and screened more than 800,000 tons of material. Due to material and construction requirements, Barton Malow has had more than 20 haul trucks working to keep up with the crushing and screening spread. Barton Malow crusher operator Jack Cronick has been impressed with the McCloskey I44Rv3 impact crusher’s production capabilities as well as the ease of operation and the mobility which allows them to move and reconfigure the equipment throughout the site as needed. According to Doug Potter, Barton Malow’s screening operator, the McCloskey R230 screeners have not only delivered outstanding production but have proven to be extremely dependable as well. CEG
Processed material from the McCloskey R230 mobile screener is fed into a Lippmann-Milwaukee LTS-100 tracked stacker which, in turn, relays the material into two McCloskey ST100 tracked stackers to create the massive stockpiles at the site.
A John Deere 410E articulated dump truck receives another load of the materials being stockpiled on site.
Dirt excavated from the site is screened for use as topsoil for the facility grounds.
Craig Kaser (L), sales/technical support manager of Maverick Environmental Equipment, reviews the work at the Ultium Cells LLC plant with Jack Cronick, crusher operator of Barton Malow. Doug Potter (L), Barton Malow’s screening operator, discusses the output of this R230 mobile screener with Tim Smith of Maverick Environmental Equipment.
This John Deere 350G excavator has its work cut out to keep up with the R230 mobile screener.
A John Deere 750K crawler dozer levels off the crushed limestone.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 41
=497 3*<8 291(-.3, 2&(-.3*
ǣȇǔȒ۬ǔƏƺɖɀƏِƬȒȅ ǔƏƺɖɀƏِƬȒȅ ٢וו٣גאٮוג
Page 42 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Maximize your ROI
To get your best possible return on investment, highest productivity and longest equipment life, it’s important to use the right carrier with the right tool.
Before you buy or rent, rely on people you can trust. 5064 FE ATURES )HDWXUHV DQ HQFORVHG HQJLQH FRPSDU WPHQW /DUJH IHHG RSHQLQJ DQG LQFK KDPPHUPLOO ZLWK D VHOI FOHDQLQJ DLU LQWDNH V\VWHP 2VFLOODWLQJ VWDFNLQJ FRQYH\RU $YDLODEOH RQ &$7 7UDFN 6\VWHP RU DV D $OVR PDQXIDFWXUHV D ZLGH YDULHW \ RI TXDOLW \ ¿I WK ZKHHO WUDLOHU W X E J U L Q G H U V 7KUHH GLI IHUHQW OHYHO RSWLRQV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS N Z WR KS N Z
action
cts in View produ Tech D e on th ura l! channe
Allied Construction Products, with 78 years of experience, can guide you to the right hydraulic breakers – including our new Excellence and Performance Series models – and the right Ho-Pac® and Skid-Pac® compactor drivers. Because nobody delivers the right power, or the right features, like Allied.
Scott Scholz
Jeff Sharp
Rich Steinbrenner
ALLIEDCP.COM | 800-321-1046
THERE’s NO SUBSTITUTE FOR EXPERIENCE TC-12 FE ATURES 7KLV SRZHU IXO FKLSSHU FDQ JULQG ORJV XS WR LQFKHV LQ GLDPHWHU DQG LV FRPSDFW VR LW FDQ EH HDVLO\ WRZHG WR D MRE VLWH KS N Z &$7 & GLHVHO HQJLQH 37 7HFK FOXWFK )HDWXUHV D VSULQJ ORDGHG IHHG ZKHHO ZLWK DGMXVWDEOH GRZQ SUHVVXUH
2SWLRQDO KHLJKW VHQVRU WKDW DXWRPDWLFDOO\ DGMXVWV WKH IHHG UROOHU WR PDWHULDO VL]H 2SWLRQDO K\GUDXOLF JDWKHULQJ ZLQFK ,QQRYDWLYH KRSSHU VDIHW \ OLJKW EDUV ZLWK HDV\ DQG LQVWDQW VKXW GRZQ $YDLODEOH ZLWK SLQWOH RU EDOO KLWFK
HIGHWAY EQUIPMENT COMPANY
ALTA EQUIPMENT COMPANY www.altaequipment.com
www.highway-equipment.com Swanston Equipment Companies
1405 Timken Place SW Canton, OH 44706 330-915-8391
www.swanston.com 3450 West Main Fargo, ND 58103 701-293-7325
3915 E Burdick Expy Minot, ND 58703 701-837-9901
w w w.duratechindustries.net
480 Blaine St. Gary, IN 46406 2770 May Rd. Peru, IL 61354 844-GO2-ALTA
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 43
A WIRTGEN GROUP COMPANY A
THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN
EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america
WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600
www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716
Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky
Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757
Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083
www.rolandmachinery.com
Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399
Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080
DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165
Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898
Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711
East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764
Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920
Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400
Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500
Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330
Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474
Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966
DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151
Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710
Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252
Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056
Page 44 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Epiroc USA Launches Try-and-Buy Program for FlexiROC T30 R Drill Rig Epiroc, a leading productivity partner for the mining and infrastructure industries, has introduced the Try-and-Buy Program for the FlexiROC T30 R Construction Edition tophammer surface drill rig. The Try-and-Buy program offers free jobsite testing of the drill. The FlexiROC T30 R surface drill is an improved version of the once-popular IR ECM 580 construction rig that tracks back from Epiroc to Atlas Copco and Ingersoll Rand. Featuring the COP SC16 rock drill and a compact design, the proven rig is ideal for a wide range of drilling applications such as road construction, foundation drilling and quarrying, according to the manufacturer.
The Try-and-Buy program includes a demo of the FlexiROC T30 R on the customer’s job site. For a limited time, participants get up to 30 engine-hours to experience the efficiency and safety benefits of the machine. If the machine is a good fit, customers can buy the machine they demo and receive special financing or a comprehensive consumables package to accompany the machine. The installation and dismantling of the rig at the customer’s site are performed by an Epiroc technician. “The FlexiROC T30 R Construction Edition brings the same features and performance that made the legacy rig highly popular,” said Ron Hankins, business line manager of Epiroc USA. “We’re excited to offer customers the opportunity to try out the drilling rig in the environment of their construction site, to see first-hand how it can improve their operations and maximize their investment.” With a low center of gravity, the FlexiROC T30 R provides rugged mobility and stability in all conditions and terrain. The rig offers increased productivity via the extensive boom reach of up to 17 ft. and an 80-degree swing radius. This type of reach translates to more holes per setup, saving time and money, according to the manufacturer. Radio remote control comes standard, giving the operator full tramming and drilling control while operating from a safe distance. This feature is especially important when job sites have limited access points or unstable terrain. The FlexiROC T30 R also can be equipped with a hydraulic winch for secure anchoring on slopes up to 30 degrees. The FlexiROC T30 R meets stringent Tier IV Final engine emissions standards and features self-adjusting RPM, which lowers fuel consumption and improves efficiency. The impact and drill feed pressure automatically adjust to ensure optimal performance and increased service life of rock drilling tools, all due to FlexiROC T30 R’s COP Logic system. To schedule a demo, visit https://www.miningandconstructionusa.com/flexiroc-t30r. For more information, visit www.epiroc.us.
The Try-and-Buy program includes a demo of the FlexiROC T30 R on the customer’s job site.
SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)
1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640
West Chicago, IL 630-293-0606
Mokena, IL 708-596-8050
Merrillville, IN 219-381-3006
Wauconda, IL 847-526-4255
www.atlasbobcat.com
Yorkville, IL 630-553-0150
1200 East Highway 13 Burnsville, MN 55337 952-894-0894
588 Outpost Circle Hudson, WI 54016 715-531-0801
71 Minnesota Avenue Little Canada, MN 55117 651-407-3727
www.tristatebobcat.com
Cincinnati, OH 513-874-8945
Reynoldsburg, OH 614-863-1300
Mt. Orab, OH 937-444-3865
Zanesville, OH 740-313-0087
Hillard, OH 614-876-1116
Lexington, KY 859-254-3936 www.bobcat-ent.com
Bobcat of Indy 2935 Bluff Road Indianapolis, IN 46225 866-442-3052
4489 S Indianapolis, Road Whitestown, IN 317-769-4946
2075 E CR 67 Anderson, IN 765-643-4222
2002 West 3rd Street Bloomington, IN 812-287-8042
www.bobcatofindy.com
With a low center of gravity, the FlexiROC T30 R provides rugged mobility and stability in all conditions and terrain.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 45
EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration.
INTIMIDAT ATO OR 15XP 115” Capacity p ity tyy Hand-Feed Chiipper pp
LARGE EQUIPMENT DEALERS THE BEAST 2460XP Trrack Horizontal Grinder
(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)
Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255
M MODEL BT BTC-300 B Trrack Carri rie ier
M MODEL 3590XL Whole Trree Chipper W pp
IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p
CHIP GRIN ND SHREED ED
BBAND ANDDIIT
675 667 750 Millbrook Rd. Rd • Remus, Remus MI 49340 • 1-800-952-0178 FIND US ONLINE WWW.BANDITCHIPPERS.COM
MODEL SG-75 Trrackk Stump S p Grinder Gi d
www.lec1.com
Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer
Page 46 • December 12, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Staying ‘Ahead of the Game’ Near California’s Creek Fire PRIMETECH from page 36
Kingsley Grinding's FAE-Primetech PT-175 grinds through a severely dusty burn-scar
ground. A fire is like any catastrophic disaschallenged by virtually zero visibility. ter. Everyone forgets that it can happen until it happens. Unfortunately, when there’s a big fire, the calls start pouring in and by that time it could be too late. The optimal time to perform fire mitigation is spring, winter, fall and early summer. We can work throughout the summer, but with dust, fire dangers and Project Activity Levels [PAL] precautions, we cannot get in as much production.” Garrett said that work during fire season can actually be slow. “Every morning we have to call the Project Activity Level line and they give us different levels of how we can work. At a C level we can work all day, at D level we can work all day but we have to have a fire watch while we’re working and two hours after, and EV level we can only work until 1 p.m., and then have to have patrol the job site for two hours looking for accidental fire starts. These are days where fuel moisture is low and there are worries about winds. This is why production can be low during the summer and it’s just one of the things we deal with. We don’t want to be the reason the fire starts, but the reason they can stop it.” of the public lands can’t use herbicide. touchy subject here, so it’s strictly mechani- make a safety zone for structures.” Owen Wadsworth, operations “What we’re seeing is a lot of these mega cal,” Wadsworth said. Joel Fonoimoana, Primetech operator of manager/owning member of Red Mountain fires coming through on public lands where “We’ve been able to take on anything that Red Mountain Resources, who was operatResources, a Georgetown-based re-foresta- they cannot use herbicide, and the fires are was thrown at us with the PT-300,” he ing in the French Meadows, Tahoe National tion contractor that does work throughout brushing in really heavy. In order to take added. “Where the PT really shines is a Forest, added his thoughts to the topic of the entire United States, said, “Our bread and over the site they have to do a mechanical brush field that they are trying to reinvent fuels reduction. “The main thing is, by elimbutter has always been using our hand mitigation or burn it again. Fire is a pretty into a timber stand, or they are trying to inating the fuel ladders, it helps prevent the crews. We’ve done a lot of fire’s ability to spread as hand tree planting, but only quickly by keeping the barrecently in California due to rier low to the ground. If a the popularity of fuels reducfire happens to start, then it tion and a result of the wildwill only burn the vegetafires they’ve been suffering tion that was left. Anything from. We’ve been getting that is left is intentional.” more involved with fuels Red Mountain Resources reduction and found it concurrently has two FAE venient to incorporate the Primetech PT-300’s purFAE PT-300 because a lot of chased from Global jobs require both hand crews Machinery and both and machines.” machines are working well According to Wadsworth, for its fuels reductions conhis company is using an FAEtracts. Primetech PT-300 prime Fonoimoana added that mover, a purchase from the forestry services “like to Global Machinery, to target leave clumps of low brush, brush and to open up areas for what they might call a the hand crews to come in. mosaic. The spacing may This piece of equipment vary but the premise is that makes it a much smoother they don’t want to totally process than in the past where annihilate all the underthe company was reliant on brush on public lands. The other contractors to come in big goal is removal of fuel do the clearing. Now, his ladders — meaning any livcompany can do it on its own. ing or dead vegetation that Another big advantage for allows a fire to climb from the use of prime movers in Staying “ahead of the game” for land clearing near California’s Creek Fire, FAE-Primetech PT prime movers are the forest floor to the tree fuel reductions is that much used for heavy mulching for forestry fuels reduction. canopy.”
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • December 12, 2020 • Page 47
mhl 375 F -SERIES
COMPANY WRENCH www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105
STRONG. RELIABLE. E EFFICIENT.
ERB EQUIPMENT COMPANY www.erbequipment.com 200 Erb Industrial Dr. Fenton, MO 63026 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484
Discover Morre Fuchs World- Class Material Handlers
© 2019 Terex Corporation. Fuchs is a trademark owned by Terex Corporation or its subsidiaries.
Page 48 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SOLD NEAR N YOU Y OU.
You o r local Doo D san® dealer is you ur source ffor or sales, par a ts and service.
Learn more at doosanequipment.c . om
Doosan® and the Doosan a logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2020 Doosan Infracorre North America, LLC. All rights reserved.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 49
Authorized Doosan Dealers
ILLINOIS
MISSOURI
INDIANA
IOWA
BOBCAT OF MARION
BOBCAT OF COLUMBIA
BOBCAT OF ANDERSON
618-985-8920 doosandealers.com/Carterville
573-886-9435 doosandealers.com/Columbia
765-643-4222 doosandealers.com/Anderson-IN
BROWN’S HEAVY EQUIPMENT
BOBCAT OF SPRINGFIELD
BOBCAT OF ST. LOUIS
B & W EQUIPMENT
217-525-0349 doosandealers.com/Springfield-IL
636-240-9020 doosandealers.com/O’Fallon
800-242-4819 doosandealers.com/Fort-Wayne
SARGENT’S EQUIP & REPAIR SERVICES
636-225-2900 doosandealers.com/Valley-Park
708-758-2062 doosandealers.com/Chicago-Heights
CENTRAL POWER SYSTEMS & SERVICES
847-844-4131 doosandealers.com/Gilberts
816-415-6700 doosandealers.com/Liberty
BOBCAT OF ST. LOUIS
417-865-0505 doosandealers.com/Springfield-MO
618-397-1847 doosandealers.com/Fairview-Heights
NEBRASKA OHIO
BOBCAT OF OMAHA
BOBCAT ENTERPRISES
402-895-6660 doosandealers.com/Omaha
513-874-8945 doosandealers.com/Hamilton
CENTRAL NEBRASKA BOBCAT
614-863-1300 doosandealers.com/Reynoldsburg
308-384-9222 doosandealers.com/Grand-Island
GIBSON MACHINERY
925-606-2451 doosandealers.com/Hastings
440-439-4000 doosandealers.com/Oakwood-Village
925-606-2451 doosandealers.com/Kearney
WISCONSIN SWIDERSKI EQUIPMENT 715-623-4668 doosandealers.com/Antigo 715-693-3015 doosandealers.com/Mosinee
NORTH DAKOTA BOBCAT OF MANDAN
BOBCAT OF BLOOMINGTON 812-287-8042 doosandealers.com/Bloomington
BOBCAT OF INDY 317-787-2201 doosandealers.com/Indianapolis
BOBCAT OF INDY NORTH 317-769-4946 doosandealers.com/Whitestown
RONSON EQUIPMENT CO. 219-696-5680 doosandealers.com/Lowell
KANSAS CENTRAL POWER SYSTEMS & SERVICES 785-462-8211 doosandealers.com/Colby 620-792-1361 doosandealers.com/Great-Bend
IRONHIDE EQUIPMENT
316-789-7370 doosandealers.com/Wichita
715-258-3266 doosandealers.com/Waupaca
701-772-5006 doosandealers.com/Grand-Forks
715-675-2391 doosandealers.com/Wausau
701-572-5050 doosandealers.com/Williston
319-857-4045 doosandealers.com/Swisher
MICHIGAN CARLETON EQUIPMENT COMPANY 616-877-3388 doosandealers.com/Byron-Center 586-463-3333 doosandealers.com/Chesterfield 269-343-2943 doosandealers.com/Kalamazoo 989-777-6666 doosandealers.com/Saginaw
ELLENS EQUIPMENT
785-825-8291 doosandealers.com/Salina
701-662-5331 doosandealers.com/Devils-Lake
RTL EQUIPMENT 515-986-0262 doosandealers.com/Grimes
BOBCAT OF EVANSVILLE 812-422-8200 doosandealers.com/Evansville
701-663-0903 doosandealers.com/Mandan
715-669-5255 doosandealers.com/Thorp
515-232-8456 doosandealers.com/Ames
KENTUCKY BOBCAT OF BOWLING GREEN 270-842-4253 doosandealers.com/Bowling-Green
CONTACT YOUR LOCAL DOOSAN ® DEALER TODAY.
231-825-2416 doosandealers.com/McBain
MINNESOTA LANO EQUIPMENT 952-445-6310 doosandealers.com/Shakopee
THECO 763-428-2260 doosandealers.com/Big-Lake 218-829-2800 doosandealers.com/Brainerd 763-428-2260 doosandealers.com/St.-Michael
Page 50 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SECTION
Attachments Pages 51-55
For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
ST Series Allows Ability to Mill, Stabilize With Same Tool Loegering Power Attachments, an ASV Holdings Inc. brand, introduced the ST Series stabilizing and milling skid-steer and compact track loader attachments to the North American market. Made up of the ST1000 and ST600, the ST Series attachments are versatile and give contractors in the construction and roadwork industries the ability to complete milling and stabilizing applications with the same tool, according to the manufacturer. “Reliability and performance are top priorities at Loegering Power Attachments,” said Buck Storlie, ASV Holdings Inc. product line manager. “The ST Series exemplifies that with solid construction and unmatched dependability. The two-in-one attachments allow contractors to use the mobility and versatility of a compact track loader or skid steer while completing milling and stabilizing applications efficiently and with maximum uptime.” The attachments are built with convenience in mind. The ST Series gives contractors the value of two tools in one, due to a unique drum design allowing both milling and stabilizing. Operators achieve accurate milling to a depth of 9 in. and the ability to follow the contour of the pavement independent of the loader due to independent level control on both sides of the attachment. Contractors achieve optimal mixing of binders into cut pavement as a result of a large mixing chamber, allowing the cut material to expand. A dust suppression system helps ensure safety compliance. Spraying stabilizing fluid or binder is convenient as a result of ports built directly into the cutter box. The 39-in.-wide ST1000 is one of the largest compact track loader
or skid-steer-mounted milling attachments on the market, according to the manufacturer. The demanding tool requires a powerful carrier to operate correctly, making it a practical fit for ASV’s RT-120 Posi-Track loader. The attachment’s size allows contractors to use a compact track loader or skid steer to complete milling or stabilizing jobs such as parking lots that may otherwise have required the expense of a larger, dedicated piece of equipment. Loegering Power Attachments also offers the 24-in.-wide ST600 for use on smaller, lower-flow-rate loaders than the RT-120, such as ASV’s RT-75 Posi-Track loader. The attachment is ideal for efficiently completing smaller projects, such as narrow roadways, small parking lots, paved trails and paths. The ST Series attachments are user friendly and simple to operate, due to joystick controls that allow full operator control at the touch of four buttons. Plus, users have the ability to control functions remotely with an optional remote control. Both attachments are built for maximum reliability, featuring a heavy-duty construction and robust 1-in.-thick frame. In addition to durability, the heavy frame provides stability by reducing bouncing during operation and keeping the attachment firmly planted to the ground, improving productivity. Maintenance is convenient due to very few required spare parts, interchangeable wear strips on skid plates, sealed bearings and only two grease fittings on the floating turn table of the attachment. Operators can easily change cutting tools with the quick change tooling system. Plus, a dual direct hydraulic drive eliminates the need
Here, an RT-75 Posi-Track loader operates an ST600. The ST Series attachments give contractors the value of two tools in one, due to a unique drum design allowing both milling and stabilizing.
for gearboxes or pulleys and the associated maintenance and reliability problems. Loegering Power Attachments backs the ST1000 and ST600 with a 12-month warranty. The ST Series attachments are part of a line of Loegering Power Attachments tools for concrete and asphalt milling and grinding designed and built for the construction, roadworks and flooring industries. The line is co-branded with Schibeci, an Australia-based specialty equipment manufacturer. For more information about Loegering Power Attachments, visit www.loegeringpower.com. For more information about ASV’s RT-120 and RT-75, visit www.asvi.com/build.
Loegering Power Attachments introduces the ST Series stabilizing and milling attachments to the North American market. The ST1000 — seen here with the ASV RT-120 Forestry Posi-Track loader — is the larger of the two and allows completion of jobs that may have otherwise required larger, dedicated equipment.
Page 52 • December 12, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Can Your
Mini-Excavator... Quick Change from Excavator...
Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!
It Can Now! XBoom Coupler® System
(800) 526-8538 Amulet.com
Available for most late-model brands up to 13K-Lbs
The XBoom Coupler® is an Exclusive, Patented product. XBoom Coupler® is a Registered Trade Mark and all product name(s), logo(s) and content is Copyright Protected © 2018.
ESCO Touts G.E.T. Detect Monitoring System for Nemisys Lip Components ESCO , a leader in G.E.T. with a wealth of knowledge from more than 100 years of developing wear solutions, is investing in innovative products to make its customers successful and create a sustainable future. A critical need is immediate detection of bucket component loss. ESCO understands the impact such an event can have — unplanned stoppage of operations, potential equipment damage, and the safety risk during the required maintenance. The G.E.T. Detect System provides instant feedback to the machine operator for G.E.T. component loss so the machine can be shut down to avoid damage to the bucket lip system and the necessary steps taken to prevent lost parts from damaging expensive crushing equipment.
ESCO released its parts monitoring system for shovels and loaders in 2019. The initial release works exclusively on the Nemisys Lip System. The G.E.T. Detect System provides instant feedback to the machine operator for G.E.T. component loss so the machine can be shut down to avoid damage to the bucket lip system and the necessary steps taken to prevent lost parts from damaging expensive crushing equipment. The Nemisys lip components are equipped with sensors that are monitored in real-time by two receiving antennae on the exterior of the machine. In event of component loss, the machine operator receives an audible signal and a visual indication on a screen at what location the component loss occurred. For more information, visit www.esco.weir.
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 12, 2020 • Page 53
BR RING SA AFETY, INNOVA I VATION T & DURABILITY Y TO YOUR O JOB B SITE ESCO loader buckets are precision engineered and d feature the Ultralok® too oth system that provides safer and easier tooth replacement. ment. Combined with premium mium materials and skilled d fabrication, ESCO delivers vers one of the most durable, high-performance gh-performance buckets available.
Ultralok® Tooth o System y
ESCO Manganese Crusher Wear e r Parts
General Equipment & Supplies, Inc.
www.esco.weir .
Alta Equipment Company
www.genequip.com
www.altaequipment.com
4300 Main Avenue • Fargo, ND 58103 800-437-2924
480 Blaine Street • Gary, IN 46406 2770 May Road • Peru, IL 61354 844-GO2-ALTA
Copyrig ght ©, WEIR and the WEIR Logo are trademarks demarks and/or registered trademarks off We eir Engineering Services Ltd.
Page 54 • December 12, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Pettibone Adds Poclain CreepDrive to Enhance Capability of Speed Swing 445F High-flow attachments compatible with a CreepDrivePettibone’s do-it-all rail crane, the Speed Swing 445F, is now available with the CreepDrive system from Poclain enabled Speed Swing include snow blowers, power brooms Hydraulics. This optional feature allows the Speed Swing to and several others. The Speed Swing 445F also is available run high-flow hydraulic attachments while driving the with dozens of attachments that do not require CreepDrive, machine at a slower independent travel speed on or off the including an adjustable V-type snowplow, tote boom, trackcleaning bucket, load rails, according to the bucket, hydraulic tool manufacturer. circuit, magnet packThe Poclain age, 20-ft. extendable CreepDrive is a hydroboom, fork frame and static driveline motor many more. that can be clutched. Most attachments When the operator can connect to the wishes to engage the machine with a stanCreepDrive, the Speed dard pin-on connection Swing’s mechanical or ACS quick coupler. transmission is placed The Speed Swing into neutral. A display 445F provides 180interface is then used degree boom rotation. to raise and lower the Its spacious, climateengine RPMs, providcontrolled operator cab Jeff Geoffroy ing the necessary The CreepDrive system from Poclain Hydraulics allows the includes a digital hydraulic flow — up Speed Swing to run high-flow hydraulic attachments while drivto 33 gal. per minute ing the machine at a slower independent travel speed on or off IQAN display module, full instrumentation — to run high-flow the rails. panel and precise, attachments. At the same time, the operator can control the CreepDrive with an pilot-operated controls. Tinted safety glass and a rearview integrated rocker pedal, which precisely travels the machine camera help ensure safe operation at all times. For more information, call 800/467-3884, or visit gopettiforward or backward at slower speeds of up to 2 miles per bone.com. hour. Peterson Manufacturing has named Jeff Geoffroy as director of marketing and business development. In his new role, Geoffroy will be responsible for increasing brand awareness, expanding customer engagement as well as leading all go-to-market activities. Under his business development title, Geoffroy will work with larger OEM cusThe new Bandit SG-75 stump power is transferred through an effi- to slide through a 36 in. gate and then tomers, providing strategies to expand Peterson solutions to grinder has the power and speed to cient gearbox drive system to a choice expand to a 55 in. wide base, providing help solve industry lighting and harness issues. quickly eliminate stumps in a backyard of 27 in. diameter grinding wheels. stability for working on slopes and Geoffroy’s position as senior global product marketing setting or land clearing application. The expandable/retractable rubber uneven terrain. manager of IBM’s Watson Commerce Group allowed him to With a 74 hp Kohler diesel engine, track undercarriage allows the machine An 80 in. swing and 2-ft. cutting resolve problems by enhancing and improving customer depth reduce the need to reposition, engagement through digital marketing solutions. More giving the operator more time to grind. recently, he was director, product marketing for ZoomInfo, The SG-75's wide wingspan pro- where he led product marketing for a pre-IPO go-to-market vides a 54 cu. ft. chip collection cham- data company. Prior to joining IBM, Geoffroy spent 15 years at Bose ber. Corporation perfecting his product management skills in Bandit’s “Super Sweep” feature effiaddition to leading the sales and marketing efforts for one of ciently moves the wheel through the stump without overloading the engine its emerging business groups. After 5 years in the United and drive train, maximizing produc- States Army, Geoffroy reached the rank of Captain then started his business career working with various OEMs including tion, according to the manufacturer. semi-conductor, medical, circuit board assembly and autoThe user-friendly remote allow oper- motive accounts like Nissan and Mazda. During his first ten ators to set swing speed, drop distance, years in the b2b environment, Geoffroy developed new proand tracking speed. It also allows the gram pricing models and engaged with departments throughoperator to have the best vantage point out the companies he served to ensure smooth product develfor grinding the stump while maintain- opment and product launches. ing a safe distance. “Jeff’s ability to achieve results is an asset as we continue An optional grading blade is avail- to focus on growing and expanding our customer reach,” The expandable/retractable rubber track undercarriage allows the able for cleaning up after the grind. said Al Anderson, VP of sales and marketing. “We welcome machine to slide through a 36 in. gate and then expand to a 55 in. wide For more information, visit Jeff who will be a key to our success.” base, providing stability for working on slopes and uneven terrain. For more information, visit www.pmlights.com. www.banditchippers.com.
Peterson Assigns Geoffroy New Roles
Bandit’s SG-75 Stump Grinder Out-Grinds
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • December 12, 2020 • Page 55
Purpose-Built Industry Rail Grapple Debuts From Hultdins Hultdins has introduced a strong, purpose-built rail industry grapple based on its SG forestry grapples. The grapple’s arm profile is designed for efficient handling of both ties and rail sections and are synchronized for more control and faster cycles. It is equipped with a cushioned cylinder to reduce shock loads and incorporates a direct mounted load holding valve for maximum safety. The cylinder also is protected to minimize potential damage to the cylinder rod. The grapple main frame and arms are constructed of high strength wear resistant steel and robotically welded. It is available in configurations for both boom trucks and tiltrotator applications. For more information, call 519/754-0044 or visit www.hultdins.com.
PUT MORE ON THE GROUND WITH
The grapple’s ar is designed fo m profile handling of bo r efficient th rail sections anties and synchronized d are control and fa for more ster cycles.
LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty
Company Wrench www.companywrench.com 4510 East 71st Street Headquarters: 4805 Scooby Lane NW Cleveland, OH 44105 440-439-4567 Carroll, OH 43112 740-654-5304 866-262-4181
920 Deneen Avenue Monroe, OH 45050 513-402-7297
Page 56 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Nesco Holdings to Acquire Custom Truck One Source Nesco Holdings Inc. announced on Dec. 3, 2020, it has entered into a definitive agreement to acquire Custom Truck One Source (CTOS) for a purchase price of $1.475 billion. Nesco and CTOS are providers of specialized truck and heavy equipment solutions including rental, sales and aftermarket parts and service. The acquisition will create a one-stop-shop provider of specialty rental equipment serving growing infrastructure end-markets, including transmission and distribution, the 5G revolution build-out and critical rail and other national infrastructure initiatives. With complementary business lines, customer bases and capabilities, the combination is expected to yield significant benefits from increased scale, breadth of product and service offerings and expanded geographic coverage. Following closing, the combined company will have a more attractive financial profile with significantly reduced leverage and enhanced liquidity providing flexibility to address anticipated demand in the large and growing addressable market in which it operates, according to Nesco. “Since Capitol’s investment in Nesco last year, our number-one strategic priority has been to find a way to bring these two companies together, given the significant value inherent in the combination,” said Mark Ein, chairman and CEO of Capitol and vice chairman of Nesco. “With enhanced scale, a broader set of capabilities and vastly improved financial flexibility, we believe the new company will be distinctively well-positioned to take advantage of the anticipated growth in critical U.S. infrastructure efforts in energy, telecom and rail over the near term and beyond. We are very pleased to partner with Platinum [Equity] given its deep knowledge and strong track record in the equipment rental industry, as well as the existing CTOS shareholders led by Blackstone. Together with Platinum and our other co-investors and the combined company’s Board and management team, we look forward to capturing the meaningful upside
“Nesco and CTOS are a perfect fit and together will be well positioned to pursue numerous opportunities in the rapidly growing specialty rental segment.” Lee Jacobson Nesco
opportunities that lie ahead.” Platinum Equity was previously the majority owner of Nesco from 2011 to 2014 and has been a longtime investor in a wide range of specialty rental businesses. “This is a powerful team of investors coming together to create value,” said Tom Gores, chairman and CEO of Platinum Equity. “We will deploy our industry knowledge and global operating expertise to maximize the potential of this investment.” “We know these companies and the industry extremely well and we have a well-defined playbook for creating value in this space,” said Louis Samson, partner of Platinum Equity. “We also have a deep bench of operations professionals specialized in merger integration and business transformation who will help bring Nesco and CTOS together, building on the best attributes of each. We expect the combination will create a compelling industrial growth company with strong fundamentals and multiple ways to drive EBITDA [Earnings Before Interest, Taxes,
Depreciation, and Amortization] organically or through additional M&A.” “We are excited to bring together our complementary companies to provide a full range of solutions to our customers,” said Fred Ross, CEO of CTOS. “I want to thank our dedicated employees for all that they do each day. Looking ahead, as a combined company, we will be very well positioned to capitalize on a broad range of growth opportunities and better serve our customers' specialty rental equipment needs on a national basis. We look forward to working together with the Nesco team to realize substantial synergies that will create meaningful value for all our stakeholders.” John-Paul (JP) Munfa, managing director of Blackstone, added, “We at Blackstone are proud to have played a role in the establishment of CTOS, in partnership with Fred Ross and other CTOS shareholders, and have seen the company more than double in size during our ownership. We believe the additional scale and public market
access provided by the transaction are the next logical step in the company’s evolution, and we are pleased to invest in a transaction carrying significant commercial benefits for the company’s customers, in partnership with Platinum, Capitol, ECP and Nesco’s existing shareholders.” “This combination will create new opportunities for our company, our employees and the customers we serve,” said Lee Jacobson, CEO of Nesco. “Nesco and CTOS are a perfect fit and together will be well positioned to pursue numerous opportunities in the rapidly growing specialty rental segment. We couldn’t have reached this milestone without the hard work of our team, and we look forward to working together with CTOS to ensure a seamless transition.” Strategic Combination Creates Compelling Industrial Growth Co. Enhanced value proposition to customers through “one-stopshop” national platform. The combined company will offer customers a full suite of solutions across the specialty rental equipment value chain, including equipment rental, new sales, used sales, aftermarket parts and service and retail parts, tools and accessories. Together, the combined company will operate on a national scale with more than 1,800 employees, 46 company-operated locations and a rental fleet that will be nearly double in size with almost 9,000 units and more than $1.3 billion in combined original equipment cost. Favorable exposure to highly attractive end-markets with strong fundamentals. The combined company’s core end-markets
will include T&D, telecom, rail and infrastructure, all of which benefit from strong secular growth and macro mega trends, as well as limited downside cyclicality. The combined company’s increased scale and national presence will provide significant opportunities to further penetrate new and existing customers across geographies and end-markets. Integrated platform with scale and differentiated offerings. The combination will create a unique business model that should drive a better customer experience and a significant increase in the number and breadth of rental assets available. With a substantially increased rental fleet, scale-enabled purchasing benefits, maximum production and customization flexibility and a well-established new and used sales business, the new company will be better positioned to serve customers and win business. Significant anticipated cost synergies with additional revenue upside opportunities. Nesco and CTOS expect to achieve approximately $50 million in runrate annual cost synergies within two years of closing. Cost savings are expected to be realized through back office consolidation, procurement and SG&A efficiencies and service and production optimization. The combined company also expects additional upside opportunities from identified revenue synergies via expanded service offerings and cross-selling opportunities and fleet synergies. Compelling financial profile with strong momentum and ample flexibility. The combined company expects to deliver pro forma 2020 adjusted EBITDA of approximately $337 million including run-rate cost synergies and pro forma 2021 adjusted EBITDA of $380 million to $400 million including run-rate cost synergies, as well as meaningful free cash flow as core end-market activity continues to grow. At closing, the combined company expects to benefit from more than $300 million in liquidity and a reduction in net leverage from 6.3x to 3.9x, based on last twelve see NESCO page 60
Trucks & Trailers
SECTION
Pages 57-65
To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
Apex Drivers Use T680 to Haul U.S. Capitol Christmas Tree For Apex Transportation drivers William “Butch” Hanna and Theron Schmalzried, transporting the 2020 U.S. Capitol Christmas tree from the Grand Mesa, Uncompahgre and Gunnison (GMUG) National Forests in Colorado to Washington, D.C., was an experience like no other. “It was such an honor to be a part of this special transport,” said Hanna. “I’ve received several awards from the Colorado Motor Carriers Association [CMCA] over my career — something I’m particularly proud of — and the opportunity to be one of the drivers responsible for hauling the U.S. Capitol Christmas tree tops it all. It was a humbling experience to represent Apex Transportation and the great state of Colorado in this journey.” Walt Schattinger, Apex Transportation president, selected Hanna and Schmalzried as the drivers for the U.S. Capitol Christmas Tree Tour. According to Schattinger, Hanna and Schmalzried rank among Apex Transportation’s top drivers and both possess more than 40 years of driving experience. Each has received numerous Apex Transportation driver recognition awards, and Schmalzried, like Hanna, also has earned CMCA awards. “Theron and Butch have been excellent drivers for us for a number of years — they’re our most tenured,” said Schattinger. “I was thrilled when I found out that Apex had been selected to transport the U.S. Capitol Christmas tree. I was just as excited to name Butch and Theron as the drivers, so they could be involved in this special opportunity. They earned and deserve it.” Hanna and Schmalzried used a Kenworth T680 to transport the 55-ft. Engelmann Spruce U.S. Capitol Christmas tree.
Paul Feenstra photo
The 2020 U.S. Capitol Christmas Tree Tour, which began on Nov. 10 in Montrose, Colo., featured 10 stops, primarily in Colorado en route to Washington, D.C.
“When I learned that we would be driving a Kenworth T680 to deliver this special Christmas tree, it was the icing on the cake for what was already an extraordinary opportunity,” said Schmalzried. The T680 was equipped with a 76-in. sleeper and the integrated PACCAR Powertrain featuring the 455-hp PACCAR MX-13 engine, PACCAR 12-speed automated transmission and PACCAR 40K tandem rear axles paired with standard predictive cruise control. The truck also was specified with Kenworth’s “Driver’s Studio” with 180-degree passenger swivel seat and 90-degree rotating table, Kenworth Diamond VIT interior, premium Kenworth GT703 seats, Kenworth Nav+HD system, and Kenworth TruckTech+ remote diagnostics. “The majority of my driving career has been behind the wheel of a Kenworth. I drive in Apex Transportation’s long haul division and Butch drives locally for the company. Kenworth produces the highest quality trucks out there and I’ve driven just about every truck make there is,” said Schmalzried.
According to Hanna, the Kenworth T680 was the first truck with an automated transmission he has driven in his career. “I’m used to shifting gears with an 18-speed transmission, so it was a bit of an adjustment for me at first. Once I got used to it, I became a fan of the PACCAR transmis-
sion. The T680 is the smoothest truck I’ve ever driven, and the visibility is phenomenal,” said Hanna. Schmalzried noted that the Kenworth T680’s visibility and onroad driving experience are attributes that caught his attention as he made his way to Washington, D.C. “I think Kenworth trucks are the best-looking trucks on the road, and as Butch mentioned, the visibility out of the T680 is fantastic,” said Schmalzried. “From a performance standpoint, I was impressed by the power I got from the PACCAR MX-13 engine. Even though it is a lighter engine compared to what I operate with Apex Transportation, I didn’t notice a difference in how the truck pulled.” The 2020 U.S. Capitol Christmas Tree Tour, which began on Nov. 10 in Montrose, Colo., featured 10 stops, primarily in Colorado en route to Washington, D.C. While public participation was limited this year, Schmalzried said nothing could derail the drivers from spreading the holiday spirit.
James Edward Mills photo
U.S. Capitol Christmas Tree Tour drivers Theron Schmalzried (L) and William “Butch” Hanna.
“It’s been a challenging year for so many,” said Schmalzried. “In times like these, it was important to spread some positivity out into the world. We drove a great looking Kenworth T680 with an awesome Christmas tree-themed design that was worth checking out, and of course, the U.S. Capitol Christmas tree. Many people safely checked out the tree as we made our way to Washington, D.C.” As a regional driver for Apex Transportation, Hanna was responsible for transporting the tree from Montrose, Colo., (near the tree harvesting site in the Uncompahgre National Forest) to Bass Pro Shops, one of the U.S. Capitol Christmas Tree Tour stops in Denver. Following the tour stop, Schmalzried began his leg of the journey that concluded in Washington, D.C. “It was an amazing experience to be involved in such a special delivery,” said Hanna. “Spreading the holiday cheer is especially important in a year like we’ve had. The tree is going to look great when it’s all lit up.” The graphics package on the Kenworth T680 features a decorated Christmas tree and the U.S. Capitol Building, 14,023-ft. Wilson Peak in Colorado’s Uncompahgre National Forest, and “From Colorful Colorado to America’s Front Steps.” This year’s logo, placed on the T680 roof, incorporates the U.S. Capitol Christmas Tree theme “Experience Your Nature,” names of the Grand Mesa, Uncompahgre and Gunnison (GMUG) National Forests in western Colorado, and Colorado state flag. The U.S. Capitol Christmas Tree lighting ceremony will be held Dec. 2, on the West Lawn of the U.S. Capitol Building. For more information, visit www.kenworth.com.
Page 58 • December 12, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
36 New Ford F450 • F550 • F600 Chassis Cabs for Year End Deals!
'(6,*1(' 72 0$.( <285 -2% ($6,(5
3 - FORD F450 CREW CAB 4x4 Chassis Cabs, 7.3 V-8 Gas and 6.7 Powerstroke Diesel, 10 Spd Auto Trans
8 - FORD F550 REG CAB 4x4 Chassis Cabs, 7.3 V-8 Gas and 6.7 Powerstroke Diesel, 10 Spd Auto Trans
2 - FORD F600 REG CAB 4x4 XL, 7.3 V-8 Gas, 10 Spd Auto 205” WB, 22,000# GVW, 10 Spd Auto Trans
14 - FORD F550 4X4 SUPERCABS 11 - FORD F550 4X4 CREW CABS 7.3 V-8 Gas and 6.7 Powerstroke Diesel, 10 Spd Auto Trans
2 - Knapheide KMT 11 - Mechanics Trucks 1 - IMT - Dominator - 1 Mechanic Truck 7.3 V-8 Gas and 6.7 Powerstroke Diesels, 10 Spd Auto Trans
FARGO, ND 701-476-7495 WWW.WALLWORKTRUCKS.COM
7 5 $ , / ( 5 6
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 12, 2020 • Page 59
Mid Country Machinery - ISUZU 55 HP ENGINE, TIER 4F
(800) 206-5936
- ISUZU 55 HP ENGINE, TIER 4F
www.midcountrymachinery.com Fort Dodge, IA (515) 574-2302
2019 LinkBelt 210X4
Waterloo, IA (319) 234-8710
Sergeant Bluff, IA (712) 943-4470
2017 Kobelco SK30SR
EXCAVATORS CATERPILLAR 2015 326FL, 4291 HRS ..........................................................$129,500 -CAT C7.1 ACERT 212 HP TIER 4 ENGINE, 9’8” STICK, AUX HYDRAULICS, 22’4” MAX DIG, 33’1” MAX REACH, BACKUP CAMERA
HITACHI 2015 ZX85, 3883 HRS ..............................................................$57,000 -T4 ENGINE, CAB EROPS W HEAT & AC, 6’11” STICK, AUX HYDRAULICS, THUMB, 36” BUCKET, 14’10” DIG DEPTH
JOHN DEERE 2014 210GLC, 2999 HRS..........................................................$99,000 - JOHN DEERE DIESEL ENGINE, 159 HP, CAB EROPS W AC, 9’7” STICK, 30.35 FT IN MAX REACH, 21.89 FT IN MAX DIG. 2003 200CLC................................................................................$CALL - JOHN DEERE DIESEL ENGINE, 140 HP, CAB EROPS, 7’ 3” STICK, 32’ MAX REACH, 20’ DIG DEPTH, 32” SHOES, 46,130 OP. WEIGHT.
KOBELCO 2020-2018 SK350LC-10, 4 UNITS............................................................ ..................32 HRS/144 HRS/164 HRS -$CALL, 228 HRS $249,000 - HINO 70 HP ENGINE, TIER 4, CAB W AC & HEAT, 13’7” STICK, 27’7” MAX DIG, 38’8” MAX REACH, 11’1” TRANSPORT WIDTH. 2020/2019 SK210LC-10, 5 UNITS ..............................................$CALL - HINO 160 HP ENGINE, CAB W AC & HEAT, TIER 4, 9’8” STICK, 22’ MAX DIG, 31’11” MAX REACH, 10’5” TRANSPORT WIDTH. 2020/2019 SK170LC-10, 3 UNITS............................................................ ..............................55 HRS/421 HRS -$CALL, 253 HRS - $119,000 - HINO 127 HP ENGINE, CAB W AC, 17’1” BOOM, 10’2” STICK, 31’1” MAX REACH, 21’3” MAX DIG, 8’6” TRANSPORT WIDTH. 2020 ED160-5, 15 HRS................................................................$CALL - ISUZU 105 HP ENGINE, CAB W AC & HEAT, 15’4” BOOM, 9’4” ARM, 19’11” MAX DIG, 28’1” MAX REACH, 42” BUCKET. 2020 SK300LC-10, 2 UNITS ........................................................$CALL - HINO 250 HP ENGINE, TIER 4F, CAB W AC & HEAT, 10’2” STICK, 32” SHOES, 23’7” MAX DIG, 35’ MAX REACH, 11’1” TRANSPORT WIDTH. 2020 SK260LC-10, 5 HRS ..........................................................$CALL - HINO 178 HP ENGINE, TIER 4F, CAB W AC & HEAT, 12’ STICK, AUX HYDRAULICS, 25’2” MAX DIG, 35’6” MAX REACH, 11’1” TRANSPORT WIDTH. 2019 SK270SR, 230 HRS ............................................................$CALL - HINO 160 HP ENGINE, TIER 4F, 9’8” STICK, 18’6” BOOM, 21’9” MAX DIG, 31’9” MAX REACH, 11’1” TRANSPORT WIDTH. 2019 SK85CS3-E, 324 HRS ........................................................$CALL - ISUZU 55 HP ENGINE, TIER 4, CAB W AC & HEAT, 12’1” BOOM, 7’ ARM, 23.6” SHOES, 13’9” MAX DIG, 23’9” MAX REACH. 2019 SK85CS-7, 3 UNITS ............................................................$CALL - YANMAR 70 HP ENIGINE, TIER 4F, CAB W AC & HEAT, 7’ STICK, 24” BUCKET, 14’7” MAX DIG, 24’1” MAX REACH, 7’7” TRANSPORT WIDTH 2016/2015 SK350LC-9E, 2425 HRS ......................................$175,000 - HINO 270 HP ENGINE, TIER 4F, CAB W AC & HEAT, 8’6” ARM, AUX HYDRAULICS, COUPLER, 34’9” MAX REACH, 22’3” MAX DIG. 2014 SK500LC-9, 4025 HRS ......................................................$CALL - HINO 345 HP ENGINE, TIER 4F, CAB W AC & HEAT, 35.4” SHOES, 13’3” ARM, 23’ BOOM, 27’7” MAX DIG DEPTH. 40’8” MAX REACH.
LIEBHERR 2008 R924C, 11196 HRS..........................................................$99,000 - LIEBHERR D934S ENGINE, 174 HP, CAB EROPS W AC, 10.2M MAX REACH, 2.85M TRANSPORT WIDTH, OP. WEIGHT: 26,545 LB.
LINKBELT 2020 245X4LC, 9 HRS ................................................................$CALL - ISUZU ENGINE, 9’8” STICK, 21’10” MAX DIG, 31’9” MAX REACH, 56,900 OPERATING WEIGHT. 2020/2019 145X4LC, 96 HRS......................................................$CALL - ISUZU 102 HP ENGINE, TIER 4, CAB W AC & HEAT, 9’11” ARM, 28’8” MAX REACH, COUPLER, 19’9” MAX DIG, 28’3” MAX REACH. 2020/2019 75X3, 2 UNITS ..........270 HRS - $92,750, 57 HRS - $CALL - ISUZU 54 HP ENGINE, TIER 4F, CAB W AC & HEAT, 7’2” ARM, 22’2” MAX REACH, 15’2” DIG DEPTH, THUMB AND COUPLER. 2019 145X4DZ, 3 UNITS..............................................................$CALL - ISUZU 102 HP ENGINE, TIER 4F, CAB EROPS, 9’11” STICK, 18’1” DIG DEPTH, MULTI-HYDRAULICS, 33,600 LBS OP. WEIGHT. 2019 490X4, 263 HRS ................................................................$CALL - ISUZU 326 HP ENGINE, TIER 4F, CAB W AC & HEAT, 13’2” STICK, 11’11” TRANSPORT WIDTH, 27’4” MAX DIG, 40’4” MAX REACH. 2019 350X4, 458 HRS ............................................................$248,000 - ISUZU 268 HP ENGINE, TIER 4F, 10’8” STICK, 24’1” MAX DIG, 36’ MAX REACH, 11’2” TRANSPORT WIDTH. 2019 300X4, 463 HRS ................................................................$CALL - ISUZU 207 HP ENGINE, TIER 4F, 12’ STICK, 36’ MAX REACH, 11’2” TRANSPORT WIDTH, 24’10” MAX DIG.
Bondurant, IA (515) 410-9900
2015 Caterpillar 326FL
2019 210X4, 4 UNITS ..................................................................$CALL - ISUZU 160 HP ENGINE, 9’8” ARM, 31’11” MAX REACH, 31’10” MAX DIG, HYDRAULIC THUMB & COUPLER, 48,900 LBS OP. WEIGHT. 2019 160X4, 757 HRS ................................................................$CALL - ISUZU ENGINE, TIER 4F, CAB W AC & HEAT, 10’ STICK, 21’4” MAX DIG, 30’3” MAX REACH, 8’6” TRANSPORT WIDTH. 2015 145X3DZ, 3241 HRS........................................................$87,500 - ISUZU ENGINE, CAB EROPS, FRONT BLADE, AUX HYDRAULICS, QUICK COUPLER, 24” BUCKET W THUMB.
WHEEL LOADERS CASE 2017 521F, 329 HRS ................................................................$99,000 - FPT 142 HP ENGINE, TIER 4F, CAB EROPS AC, AUX HYDRAULICS, JRB QUICK COUPLER, 2.5 YD BUCKET, 106” TRANSPORT WIDTH.
CATERPILLAR
SANY 2020 SY215, 2 UNITS..................................................................$CALL - CUMMINS 164 HP ENGINE, TIER 4F, CAB W AC & HEAT, 9’7” STICK, 21’8” MAX DIG, 33’10” MAX REACH, 10’5” TRANSPORT WIDTH. 2020 SY265CLR, 3 UNITS ..........................................................$CALL - CUMMINS 190 HP ENGINE, TIER 4F, CAB W AC & HEAT, 43’8” MAX DIG, 57’9” MAX REACH, 11’1” TRANSPORT WIDTH. 2020/2019 SY95, 5 UNITS ..........................................................$CALL - YANMAR 72 HP ENGINE, TIER 4F, CAB W AC & HEAT, 6’7” STICK, 14’2” MAX DIG, 21’10” MAX REACH, 10’6” TRANSPORT WIDTH. 2019 SY135, 2 UNITS..................................................................$CALL - ISUZU 104 HP ENGINE, TIER 4F, CAB W AC & HEAT, 8’2” STICK, 18’1” MAX DIG, 27’2” MAX REACH, 8’6” TRANSPORT WIDTH 2016 SY235C LONG REACH, 3268 HRS ..................................$89,500 - CUMMINS 172 HP ENGINE, TIER 3, 24’7’ STICK, 46’7” MAX DIG, 58’4” MAX REACH, 10’5” TRANSPORT WIDTH.
2018 926M, 3 UNITS0 HRS - $139,750, 136 HRS/ 320 HRS $134,000 - CAT ENGINE, TIER 4F, CAB EROPS AC & HEAT, 3RD VALVE HYDRAULICS, COUPLER, 2.7 YD BUCKET, 8’4” TRANSPORT WIDTH. 2018 906M, 3 UNITS..................80 HRS/289 HRS/259 HRS - $79,000 - CAT 73 HP ENGINE, TIER 4, CAB EROPS NO AC, 1.2 YD BUCKET, 3RD VALVE HYDRAULICS, 72.5” TRANSPORT WIDTH. 2015 950M, 1562 HRS ..........................................................$187,500 - CAT 230HP ENGINE, TIER 4, CAB EROPS W AC & HEAT, 4.25 YD BUCKET, 20.5-25 12PR(L2) TIRES. 2014 938K, 5681 HRS ..............................................................$92,500 - CAT 169 HP ENGINE, CAB EROPS W AC & HEAT, 3RD VALVE HYDRAULICS, 3 YD SMOOTH BUCKET, 20.5 R25, RADIAL (L-3) TIRES. 1994 950F, 7541 HRS ..............................................................$47,500 - CAT 180 HP ENGINE, CAB EROPS W HEAT & AC, 3.5 YD BUCKET, 20.5 R25 TIRES, 109” TRANSPORT WIDTH.
VOLVO
HITACHI
2005 EC460, 15566 HRS ..........................................................$38,500 - VOLVO 316 HP ENGINE, CAB EROPS, 12’10” STICK, 24” TRACKS, 25’3” MAX DIG, 38’8” MAX REACH, 11’11” TRANSPORT WIDTH
2020 ZW120-6, 10 HRS..........................................................$120,000 - DEUTZ 95 HP ENGINE, TIER 4F, CAB W AC & HEAT, JRB COUPLER, 1.8 YD BUCKET, AUX HYDRAULICS, 17,900 OP. WEIGHT. 2020 ZW220-6, 9 HRS ................................................................$CALL - CUMMINS 200 HP ENGINE, TIR 4F, CAB EROPS W AC & HEAT, 3RD VALVE HYDRAULICS, JRB QUICK COUPLER, 108” TRANSPORT WIDTH. 2020 ZW80, 5 UNITS19 HRS - $79,000, 54 HRS/95 HRS/119 HRS/143 HRS - $75,000 - DEUTZ 63 HP ENGINE, TIER 4F, CAB EROPS AC & HEAT, 3RD VALVE HYDRAULICS, 1 YD BUCKET, 6.3’ TRANSPORT WIDTH. 2019 ZW50-5B, 52 HRS............................................................$63,000 - KUBOTA 46 HP ENGINE, TIER 4F, CAB EROPS W AC & HEAT, COUPLER, .78 YD BUCKET, COUNTERWEIGHT, 5.4’ TRANSPORT WIDTH. 2018 ZW150-6, 440 HRS........................................................$149,000 - CUMMINS 138 HP ENGINE, CAB EROPS W AC & HEAT, 3RD VALVE HYDRAULICS, 2.8 YD BUCKET, COUPLER, 27,602 OPERATING WEIGHT.
DOZERS CATERPILLAR 2018/2016 D6K2 LGP, 3 UNITS, 1 HR - $175,000, 4151 HRS $112,000, 5795 HRS - $105,000 - CAT 160 HP ENGINE, TIR 4F, CAB W HEAT & AC, REAR HYDRAULICS, 6-WAY BLADE, 30” TRACK, 109” TRANSPORT WIDTH. 2016 D4K2 LGP, 2 UNITS ....2481 HRS - $95,000, 1297 HRS - $CALL - CAT 92 HP ENGINE, TIER 4F, CAB EROPS AC & HEAT, 6-WAY VPAT BLADE, 25” SHOES, 18,666 LBS OP. WEIGHT 2015 D6N LGP, 2 UNITS ......8685 HRS - $89,000, 3746 HRS - $CALL - CAT 150 HP ENGINE, CAB EROPS AC & HEAT, 6 WAY BLADE, 33” SHOE SIZE. 2015-2012 D6T LGP, 8 UNITS, 5387 HRS $199,000, 5552 HRS $190,000, 6580 HRS - $159,000 4330 HRS/4199 HRS /0 HRS - CALL - CAT 257 HP ENGINE, CAB EROPS AC & HEAT, 6 WAY BLADE, 36” TRACK, ACCUGRADE READY, 10’6” TRANSPORT WIDTH. 2014/2012/2008 D6T XW, 4 UNITS, 4897 HRS - $189,500, 4805 HRS $179,000, 5272 HRS - $155,000 - CAT 228 HP ENGINE, TIER 4F, CAB EROPS W AC & HEAT, REAR SCREEN, SU BLADE, 30” TRACK, RIPPER, 9’8” TRANSPORT WIDTH. 2014 D6T XL, 2 UNITS ..3712 HRS - $209,000, 3765 HRS - $173,500 - CAT 228 HP ENGINE, CAB EROPS AC & HEAT, SEMI-U BLADE, 22” TRACK WIDTH, PADS, GPS READY, 10’ TRANSPORT WIDTH. 2012/2006 D6N XL, 2 UNITS.................................................................... ....................................3908 HRS - $145,000, 8515 HRS - $58,000 - CAT 145 HP TIER 3 ENGINE, CAB EROPS, 6 WAY BLADE, 24” STEEL PADS. 10’8” TRANSPORT WIDTH, RIPPER VALVE. 2012 D8T, 10265 HRS ............................................................$205,000 - CAT 2236 ENGINE, 354 HP, CAB EROPS, DIFFERENTIAL STEERING, RIPPER, 24” SHOES. 2010 D6K LGP, 2 UNITS ....1414 HRS - $CALL, 3257 HRS - $115,000 - CAT 125 HP ENGINE, TIER 3, CAB EROPS, ARO READY, 6-WAY BLADE, 30” SHOES, DRAWBAR, 9’ TRANSPORT WIDTH. 2006/2001 D6R XL, 2 UNITS.................................................................... ..................................10561 HRS - $125,000, 7465 HRS - $67,500 - CAT 175 HP TIER 1 ENGINE, CAB EROPS, SU BLADE, 22” SHOES, 10’4” TRANSPORT WIDTH, DRAWBAR.
JOHN DEERE 2020 655K, 608 HRS ..............................................................$185,000 - POWERTECH 155HP ENGINE, TIER 4F, CAB EROPS W AC & HEAT, 2.6 YD BUCKET W TEETH, 3RD VALVE HYDRAULICS, 20” SHOES. 2020 850L, 261 HRS ..................................................................$CALL - POWERTECH 225 HP ENGINE, TIER 4F, CAB W AC & HEAT, SU BLADE, 30” TRACK WIDTH, 120” TRANSPORT WIDTH. 2019 700K LGP, 492 HRS ......................................................$170,000 - POWERTECH 130 HP ENGINE, TIER 4F, CAB W AC & HEAT, 24” SHOES, RIPPER, AUX HYDRAULICS. 2013 650K XLT, 2976 HRS........................................................$57,000 - DEERE PWS 104 HP ENGINE, TIER 4, OROPS, 6 WAY BLADE, 8’1” TRANSPORT WIDTH, 4 FUNCTION VALVES, SCREENS.
KOMATSU 2018 D51PX-24, 826 HRS ......................................................$145,000 - KOMATSU 133HP ENGINE, TIER 4F, CAB W AC, 6 WAY BLADE, 28” TRACK, 8’6” TRANSPORT WIDTH.
JOHN DEERE 2016/2014 644K, 2 UNITS4560 HRS - $119,500, 5196 HRS $118,000 - HYBRID POWERTECH 230HP ENGINE, TIER 4, CAB EROPS W AC, 4 YD BUCKET, 117.5” TRANSPORT WIDTH. 2015 544K, 3029 HRS ..............................................................$97,000 - JOHN DEERE 163 HP ENGINE, TIER 4, CAB EROPS AC & HEAT, 3 YD BUCKET, COUPLER, 3RD VALVE HYDRAULICS, 8.5” TRANSPORT WIDTH. 2013 524K, 5324 HRS ..............................................................$75,000 - POWERTECH 141 HP ENGINE, TIER 4, CAB EROPS W AC & HEAT, 3RD VALVE HYDRAULICS, RIDE CONTROL, 27,928 OP. WEIGHT. 1975 644B, 5789 ......................................................................$12,500 - 160 HP ENGINE, CAB EROPS W HEAT, 2.5 YD BUCKET, 20.5-25 TIRES, 28,100 OP. WEIGHT, 102” TRANSPORT WIDTH.
KAWASAKI 2015 67Z7, 1085 HRS ..............................................................$99,000 - ISUZU 154 HP ENGINE, TIER 4, CAB EROPS W AC & HEAT, 20.525-12PR (L-2) TIRES, 17,900 LBS OP. WEIGHT. 2013 60ZV-2, 3360 HRS ..........................................................$52,000 - DEUTZ 99 HP ENGINE, CAB EROPS W AC, GP BUCKET, HYDRAULIC COUPLER, 17.5X25 RUBBER TIRES, 17,900 OPERATING WEIGHT.
SKID LOADERS JOHN DEERE 2019 333G, 3 UNITS166 HRS - $72,000, 1064 HRS - $55,000, 94 HRS - $CALL - YANMAR 75 HP, TIER 4, CAB W AC & HEAT, 2 SPEED, HIGH FLOW HYDRAULICS, 110,570 LB TIPPING LOAD 2019 331G, 345 HRS ................................................................$63,000 - YANMAR 92 HP ENGINE, TIER 4, 2 SPEED, CAB W AC & HEAT, HAND CONTROLS, HIGH FLOW HYDRAULICS, 84” HD BUCKET, 7,400 LB TIPPING LOAD. 2019 325G, 3 UNITS ..394 HRS /145 HRS - $55,000 96 HRS - $CALL - YANMAR 74 HP ENGINE, 2 SPEED, CAB W AC & HEAT, STD HYDRAULICS, 78” BUCKET, 7,400 LB TIPPING LOAD.
Authorized Dealers
2019 Sany SY60
2019 324G, 8 UNITS ................................................................$51,000 - YANMAR 74 HP ENGINE, TIER 4, 2 SPEED, CAB W AC & HEAT, HAND CONTROLS, STD HYDRAULICS, 86” BUCKET, 5,380 LB TIPPING LOAD. 2019 317G, 2 UNITS ..............112 HRS - $47,000, 437 HRS - $44,000 - YANMAR 65 HP ENGINE, TIER 4F, CAB W AC & HEAT, 72” BUCKET, 5’5” TRANSPORT WIDTH, 6,070 LB TIPPING LOAD.
KUBOTA 2019/2017 SVL75, 2 UNITS181 HRS - $56,000 694 HRS - $50,000 295 HRS - $52,000 - KUBOTA 75 HP ENGINE, CAB EROPS W AC & HEAT, AUX HYDRAULICS, COUPLER, 2 SPEED, 74” HD BUCKET.
MANITOU 2020 2150RT, 2 UNITS ................................................................$CALL - YANMAR 72 HP ENGINE, CAB EROPS W HEAT & AC, HIGH FLOW HYDRAULICS, 74” BUCKET, 9,000 LB OP. WEIGHT. 2020 3200VT, 2 UNITS ................................................................$CALL - DEUTZ 114 HP ENGINE, CAB EROPS W AC & HEAT, HIGH FLOW HYDRAULICS, 84” HD BUCKET, 12,350 LB OP. WEIGHT.
TAKEUCHI 2011 TL240, 2568 HRS ............................................................$30,000 - YANMAR 84 HP ENGINE, TIER 3, CAB EROPS W AC & HEAT, HIGH FLOW HYDRAULICS, COUPLER, 70” TRANSPORT WIDTH.
MINI EXCAVATORS GEHL 2009 283Z, 2062 HRS ..............................................................$19,500 - YANMAR 20 HP ENGINE, AUX HYDRAULICS, 9’ MAX DIG, 14’1” MAX REACH, BUCKET & COUPLER, 5’2” TRANSPORT WIDTH.
IHI 2015 35V4....................................................................................$CALL - YANMAR 24 HP ENGINE, AUX HYDRAULICS, 11’ DIG DEPTH, 17.25’ MAX REACH, 5’ TRANSPORT WIDTH, 8,102 OP. WEIGHT.
KOBELCO 2020-2017 SK55SRX-6E, 10 UNITS ............................................$CALL - YANMAR 37 HP ENGINE, TIR 4F, 5’7” STICK, AUX HYDRAULICS, QUICK COUPLER, 12’10” MAX DIG, 20’ MAX REACH. 2020/2018/2015 SK35SR-6E, 5 UNITS........................................$CALL - YANMAR 23 HP ENGINE, TIR 4F, 5’6” STICK, AUX HYDRAULICS, COUPLER, 10’ MAX DIG, 17’7” MAX REACH, 5’7” TRANSPORT WIDTH. 2019 SK45SRX-6E, 220 HRS ......................................................$CALL - YANMAR 37.5HP ENGINE, TIER 4F, 5’1” STICK, AUX HYDRAULICS, COUPLER, 24” BUCKET, 11’3” MAX DIG, 18’8” MAX REACH. 2018 SK75SR-3E, 2 UNITS ......................................................$99,500 - ISUZU 55 HP ENGINE, TIER 4F, 7’ STICK, AUX HYDRAULICS, 15’ MAX DIG, 22’2” MAX REACH, 24” BUCKET, 8’ TRANSPORT WIDTH. 2017 SK30SR, 258 HRS ..........................................................$33,000 - YANMAR 23 HP ENGINE, 64” STICK, AUX HYDRAULICS, COUPLER, THUMB, 9’3” MAX DIG, 17’1” MAX REACH, 65” TRANSPORT WIDTH.
SANY 2019-2017 SY35/U, 5 UNITS ......................................................$CALL - YANMAR 24.4 HP ENGINE, TIER 4F, 4’7” STICK, AUX HYDRAULICS, 24” BUCKET, 10’2” MAX DIG, 5’8” TRANSPORT WIDTH. 2019 SY60, 4 UNITS....................................................................$CALL - YANMAR 57 HP ENGINE, TIER 4F, 5’7” STICK, AUX HYDRAULICS, 13’ MAX DIG, 20’9” MAX REACH, 6’7” TRANSPORT WIDTH.
BACKHOES CATERPILLAR 2017/2016 420F2, 4 UNITS964 HRS/ 1960 HRS - $75,000, 1140 HRS/ 1362 HRS - $82,000 - CAT 102 HP ENGINE, TIER 4, CAB EROPS AC, 4X4, AUX HYDRAULICS, EXTENDABLE, ST BLADE, 28” BUCKET.
JOHN DEERE 2016 310SL, 1220 HRS ............................................................$79,500 - POWERTECH PLUS 99 HP ENGINE, TIER 3, CAB W AC & HEAT, 4X4, EXTENDABLE, AUX HYDRAULICS, 24” BUCKET W TEETH.
NEW HOLLAND 2012 B95C, 1503 HRS ..............................................................$39,000 - FPT 97 HP ENGINE, CAB EROPS AC & HEAT, 14.5’ MAX DIG, 24” BUCKET, 4X4, 7.5’ TRANSPORT WIDTH.
Page 60 • December 12, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Nesco, CTOS Merger Offers Customers One-Stop-Shop, Diverse Rental Options NESCO from page 56
months ended Sept. 30, 2020, adjusted EBITDA, including run-rate cost synergies. Leadership, Headquarters At closing, the Nesco board of directors will be reconstituted such that Blackstone, ECP and Capitol each retain one board seat and Platinum holds majority voting power of the board. Together, the parties will work to drive value for all shareholders. Ross is expected to serve as CEO of the combined business. The combined company will be headquartered at the CTOS campus in Kansas City, with significant operations maintained in Indiana. Additional details, including plans for integrating the respective brands, will be addressed post close by a transition team comprising representatives from each of the companies. Approvals The transaction has been unanimously approved by the Nesco board of directors and is expected to close in the first quarter of 2021, subject to shareholder approval and other customary conditions. ECP and Capitol have entered into voting agreements in support of the transaction.
About Nesco Nesco is among the largest providers of specialty equipment, parts, tools, accessories and services to the electric utility transmission and distribution, telecommunications and rail markets in North America. Nesco offers its specialized equipment to a diverse customer base for the maintenance, repair, upgrade and installation of critical infrastructure assets including electric lines, telecommunications networks and rail systems. Nesco’s coast-to-coast rental fleet of more than 4,000 units includes aerial devices, boom trucks, cranes, digger derricks, pressure drills, stringing gear, hi-rail equipment, repair parts, tools and accessories. For more information, visit investors.nescospecialty.com. About Custom Truck One Source (CTOS) CTOS is a provider of specialized truck and heavy equipment solutions to the utility, telecommunications, rail and infrastructure markets in North America. CTOS solutions include rentals, sales, aftermarket parts and service, equipment production, manufacturing, financing solutions, and asset disposal. With vast equipment breadth, CTOS’ team services its customers across an integrated network of 26 locations across North America. For more information, visit customtruck.com.
XL Specialized Trailers Set to Expand XL Specialized Trailers is planning a $6 to $7 million expansion to its headquarters in Manchester, Iowa. The expansion will increase production capacity by more than 30 percent. The new development, which will be under way at the end of 2020 or early 2021, will add roughly 55,000 sq. ft. to the north side of its current manufacturing footprint. Construction is scheduled to be completed by the end of 2021. The growth at XL is not limited to the facility. The expansion also will allow room to add many new positions to the company. Currently the manufacturer has hundreds of people on its team with plans to add 65 new jobs to the small eastern Iowa city of nearly 5,000 residents. “Increasing our space and adding more team members positions us to serve our customers better than ever before,” said Stuart Sleper, president and CEO of XL Specialized Trailers. “We will be well positioned for growth in the market and reduce lead times on our products.” Currently, XL is working with the state of Iowa, in addition to the city, to
www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121
www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700
A record sales year in 2019 has allowed XL to power through the COVID19 pandemic despite what the market indicates as a 45 percent drop in the low-bed trailer industry in 2020.
receive zoning permits and tax incentives. The city of Manchester is holding a public hearing for an Urban Renewal Plan Amendment and would give XL a 10-year, 80 percent tax rebate if passed. The date for the hearing is set for Dec. 14. A record sales year in 2019 has allowed XL to power through the COVID-19 pandemic despite what the market indicates as a 45 percent drop in the low-bed trailer industry in 2020. “We’re fortunate to have a diversified portfolio in the industries we serve with some sectors performing better than others,” said Sleper. “At the moment, we have a backlog and strong order activity. We also are fortunate to
have the best dealership network in the industry and a loyal customer following. When the economy bounces back, we’ll be able to take advantage of our expansion in production capacity.” Because of its recent financial health, XL has plans for community outreach and support. “We’ve never really been active as a community partner before, and we’d like to change that,” said Sleper. “We want to be the employer of choice in the area, and also be recognized as a helpful partner in our city and community. XL Specialized Trailers has big plans, and we are excited for the future.” For more, visit www.xlspecializedtrailer.com.
455 West Ave. North West Salem, WI 54669 608-786-2644
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 12, 2020 • Page 61
,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV
5 # , 1 * # " +
:JHU 5V^ [V >H[JO =PKLV
9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP
www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182
www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107
www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085
www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551
3300 Ogden Ave. Lisle, IL 60532 630-355-7150
www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700
7355 East 30th St. Indianapolis, IN 46219 317-544-3411
150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362
600 Walnut Ct Rockdale, IL 60436 815-730-9011
3021 South 460 East Lafayette, IN 47905 765-477-6933
3110 Prairie Rd. Rockford, IL 61102 815-961-3160
1095 N Curry Pike Bloomington, IN 47404 812-333-9677
25166 State Road 2 South Bend, IN 46619 574-232-1461
3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576
3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160
Page 62 • December 12, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
+ PLUS CURRENT
SCHEDULED MAINTENANCE1
+ PLUS
2-YEAR/24K
UPFIT CASH
2
www.jeffbelzerchevy.com
JARRET PETSCH 952-469-7063 JPETSCH@JEFFBELZER.COM Lakeville, MN 55044
JOHN ZADURSKI 952-469-6818 JZADURSKI@JEFFBELZER.COM Lakeville, MN 55044
OFFERS
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 12, 2020 • Page 63
Pittsburgh, PA Lancaster, PA Hubbard, OH Cincinnati, OH
(412) 747-7777 (717) 569-4531 (330) 534-0082 (513) 874-4880
Daily RENTALS & Long-Term LEASING! (412) 747-7777
New & Used Trailer Sales • Rental / Leasing • Financing • Service • Parts • 175 — 2015 Reitnouer 48'x102" Maxmiser $24,950 Flatbeds (Coming Soon) • 65 — 2014 Reitnouer 48'x102" Maxmiser $23,500 Flatbeds (In Stock)
*D O R S E Y S T E E L F L AT S *
2021 60-TON XL Specialized, 26’ Deck Length, 18� Deck Height, 60-Ton in 10’, 36� Flip Neck, Hydraulic Nitro Spreader, Intermediate Flip Axle, Standard Flip Axle.
2008 Load King 40-Ton Hydraulic Folding Neck with 4th Axle Flip. Unit # 4308
Trailer can be run as 3, 4, or 5 axles together, RU FRQÂż JXUDWLRQV
Qty 20 - 48’x102� Spring Sliders, Winch Track w/12 Winches, Apitong Floor, Painted Black. $24,975 Incl. FET. ALL Tri-State Locations
Spec’s/ Features:
EAGER BEAVER TAGS
*XL SPECIALIZED MINI-DECKS* Qty 2 – 53’x102� 40-Ton Mini-Deck, Hydraulic Classic Neck, 33’7� Clear Deck, 12� Loaded Deck Height, Accepts Both Flip Box and Flip Axle.
• 48’x102�
Qty 12 – 20XPT, 20-Ton, 21’ Flat Deck, Air Brakes with Spring Ramps (Qty 4 – with Hydraulic Ramps).
• Front Axle Lift
Qty 3 – 25XPL, 25-Ton with Spring Ramps (Qty 2 – with Hydraulic Ramps).
• LP22.5 Tires
*BEAVER TAIL DROPS*
ONLY
9,300lb +/-
s
• Aluminum Wheels • Winch Track on Both Sides of the Trailer • +HQGULFNVRQ 7LUH ,QÀ DWLRQ 6\VWHP
Qty 1 – 48’x102� 35-Ton Mini-Deck, Hydraulic Classic Neck with Full Width Top Deck, 27’ 11� Clear Deck, 12� Loaded Deck Height, Accepts Flip Axle. (Not Pictured)
Qty 9 - 53’x102� Dorsey Steel Drops with 53� Beaver Tail, Spring Assist Ramps, Winch Track, Both 22.5 and 17.5.
2008 Reitnouer Bubba Drop 51’x102�, 22.5 Tires. Unit # 3874
$23,900
NEW MANAC S-T-R-E-T-C-H FLATBEDS
*X L 55 - TO N 15� D E C K LOW B OYS* Qty 4 – XL Specialized 55-Ton Hydraulic Detachable, 26’ Well, 15� Loaded Deck Height, O/S Alum. Wheels, Rear Axle Lift. Qty 1 – XL Specialized 55-Ton with Hydraulic Lift Axle, 26’ Well, 15� Loaded Deck Height, O/S Alum. Wheels, Rear Axle Lift.
Qty 3 - NEW Eager Beaver Pavers, 35 GSL-PT Hydraulic Detachable Lowboys, 35-Ton, 24’ Deck, Air Ride. Qty 1 - 35 GSL-BR, 35-Ton, 24’ Deck, Beaver Tail.
2018 Fontaine Magnitude 55L Plus, 26’ in the Well. Unit # 4234 2013 Kalyn Siebert, 55-Ton, 26’ Well, Pony Motor. 2016 Fontaine Renegade LX40, 29’ in the Well. (Not Pictured) Unit # 4103
EXTENDABLES
Qty 8 - 48’-80’x102�, Air Slider & Spring Slider. Qty 2 - 53’-90’x102�, Tri-Axle Air. All with Winch Track and Galvanized Winches.
2013 Sunbelt Pole Trailer, 48’/65’x102�, S/R. Unit# 4031
Qty 12 - 2018 Transcraft 48’x102�, Combo Dropdeck’s. Unit# 4191
ip s Fl oxe e v B Ha Flip e W s& le Ax Qty 1 – Fontaine Magnitude 55L Plus, 18� Deck Height, 26’ Well, o/s Alum Wheels, Front Ramps, Rear Lift Axle.
Qty 2 – 2021 Fontaine LXTN-40, 50’-71’x102�, 29’ Well - Closed, 50’ Well - Open, 40-Ton, Hydraulic Detach.
2012 Trail-Eze, 40-Ton, 48’x102�.
Qty 1 – 2021 Fontaine 55MXT 55’-76’x102�, 29’ Well – Closed, 50’ Well – Open, 55-Ton, Hydraulic Detach. (Not Pictured)
2013 Trail-Eze, 40-Ton, 46’x102�. (Not Pictured) Unit # 3521
Qty 1 – Fontaine LXT-40, 53’-74’x102�, 34’ Well – Closed, 55’ Well – Open, Mechanical Detach.
2009 Load King, 40-Ton, 48’x102�. (Not Pictured) Unit # 4236
HYDRAULIC TAILS Unit # 4038
Qty 6 – Fontaine Workhorse 55LCC, 18� Deck Height, 26’ Well, o/s Alum Wheels, Rear Lift Axle, Some w/ Wheel Covers.
Qty 1 – Fontaine Magnitude 60LCC, 18� Deck Height, 26’ Well, o/s Alum Wheels, Front Ramps, Rear Lift Axle.
Qty 2 – Fontaine Magnitude 55-Ton Drop Side Rail, Rear Lift Axle, o/s Alum Wheels.
Qty 1 – Fontaine EQI Hydraulic Spreader.
We Rent & Lease all types of Hydraulic Detachable’s, Drop-decks, Flatbeds, Sliding Axles, Extendable (flatbeds & double drops) Dry Freight Vans and more!
Page 64 • December 12, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
What can you haul in a side dump trailer? Nearly anything.
Superior Stability
Faster Cycle Times
Easier Unloading
With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • December 12, 2020 • Page 65
NO OT ALL T TRAILERS S ARE BU UILT THE E SAME SOM ME ARE STRO ONGER THAN N OTHERS
Our ttrrailers start out tough gh and stay tough so th heyy can safelyy haul yyour equipment q p day after t day, yearr after year. Learn more: towmaster ster.com/more .
Hyd Dump D Drop-De eck
Tilt-Deck
AMER RICA A’S ’S BEST B BUIL LT T TRAILE TRAILERS ERS FOR R PROFESSIONAL HAULER RS
Hyd draulic Tail a
Lowboy
M MORE MODELS • MORE OPTIONS PTIONS • MORE CHOICES
Call 800-462 2-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH
Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com
McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800 Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 Marne 1064 Franklin Street Marne, MI 49435 616-371-7250 www.McCannOnline.com
Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 www.diamondequipment.com
Ziegler CAT 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com
Alta Equipment Company Bryon Center, MI 616-878-7450 New Hudson, MI 248-356-5200 Traverse City, MI 231-714-6210 Detroit, MI 313-394-1811 Flint (Burton), MI 810-744-4840 Gaylord, MI 989-731-9988 Sterling Heights, MI 568-474-5063 Bloomington, IL 309-585-3800 Spring Grove, IL 708-547-7300 Ottawa, IL 815-313-2070 www.altaequipment.com
Page 66 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Heavy Haul Corridor Requires Blasting, Land Clearing
WSP photo
WSP photo
Equipment being used on the project includes a Link-Belt TCC 750 crane. CORRIDOR from page 1
groundbreaking ceremony held in November 2019. Among those in attendance were Jeffersonville Mayor Mike Moore; Brian Dixon, Clark County engineer; and Kathy Eaton-McKalip, director of LPA/MPO grant administration of INDOT, as well as project representatives and numerous leaders from the community and area businesses. According to Ryan Cox, INDOT area engineer, the biggest challenges
tied to the critical new infrastructure project have been obtaining access to necessary property and the relocation of existing utilities. “The project was let with both property and utility exception, which has to be worked through during active construction versus being clear before the contract was awarded. Concerns include safety of the traveling public on existing roads that intersect the Heavy Haul Transportation Corridor [UticaSellersburg Road and Old Salem
Land is cleared at the north end of the project.
Road], as well as the safety of the crews on site. This includes operators and laborers, who must be aware of changing field conditions, especially when working around and using heavy equipment and machinery.” The route is being built as a twolane urban minor arterial road with 14.5-in. thick pavement over a lime stabilized subgrade, and the roadway will consist of two lanes 13 ft. wide with 11-ft. outside shoulders and a design speed of 35
WSP photo
The most time-consuming parts of the project are building the embankment over soft soils, bridge construction and tying into the existing roadway.
mph. The most time-consuming parts of the project are building the embankment over soft soils, bridge construction and tying into the existing roadway. “The contractor and subcontractors are blasting rock; placing and compacting embankment; installing drainage structures; and building a temporary bridge over Lentzier Creek,” said Cox. “Work is progressing slowly.” As for unexpected problems, “Soft soils have been an issue, which were addressed via change order with cement and lime drying agents to stiffen existing soils. Utility relocations have slowed progress, due to scheduling conflicts.” Future tasks for workers include the continuous building of embankments, placing temporary asphalt, installing steel piling and foundations for bridge construction, placing bridge beams, pouring the concrete bridge deck and installing signage and guardrail. As with any construction project, the elements are a concern. “Any inclement weather could impact the access and mobility of hauling and placing embankment,” said Cox. Equipment being used on the project includes a Cat 336F excavator; a Cat 349FL excavator; a Cat 745C articulated truck; a Cat D6 dozer; a Volvo SB115D
sheepsfoot roller; a John Deere 544K loader; a Kubota SLV95 skid steer; and a Link-Belt TCC 750 crane. The various heavy machinery located at the job site is being used for digging out, moving and compacting material, in addition to installing pilling and bridge beams, among other tasks. Materials required to complete the work include drainage structures, various sizes of aggregate, steel piling, rebar and concrete. Approximately 225,000 cu. yds. of dirt/material will be moved on the project. Prior to construction, the project site was a densely wooded area. Preparation work included surveying, drilling, completion of a geotechnical report and the clearing of existing trees and vegetation. MAC Construction serves as the general contractor for the project. MAC is one of the larger contractors in the immediate area of the project, performing small-to-medium utility and local municipality work in southern Indiana. WSP is the consulting firm performing all construction inspection activities for INDOT. The project is being overseen by Seymour District Construction (INDOT). Preparation of the project’s environmental document began in the spring of 2014. Design development started in early 2016. The see CORRIDOR page 90
Pages 67-71
Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.
Winter Equipment Begins to Eye Private Sector Market Winter Equipment photo
Winter Equipment photo
Concentrating on needs of DOTs, counties, municipalities and contractors, Winter Equipment’s systems provide practically engineered solutions for everything from highway and city snowplows to light-duty trucks.
By Ruksana Hussain CEG CORRESPONDENT
Winter Equipment photo
address in recent times. The global pandemic hit closer home with a few personnel affected by COVID-19 at Winter Equipment’s offices. The company shut down for the better part of 10 weeks in the spring but ran production heavy in the sumNate Kallay mer to build up inventory to prepare for the rest of the year. Meanwhile, an ongoing challenge for the Winter Equipment operations of the business has been material sourcing. Nate Kallay, director of sales and marketing. “We tradition“We don’t lack for equipment or labor force so that’s ally are a company with a focus on government, we know never a concern, but materials are,” said Kallay, stating the how to reach that market and sell to them. We’ve moved to company has moved from sourcing domestic to global for a a retail market or consumer product private market. This is a majority of its materials in recent times. “We moved a lot of very big space for us to figure out where we need to be. We that just to maintain the quality, but we have managed to have an eight-person sales staff and we’ve identified roughly see WINTER page 68 27,000 accounts in North America that we believe have a snow removal responsibility, so it’s a challenge.” Winter Equipment photo That aside, the uncertainty of the weather has always played a vital role in business operations given Winter The flexibility to fit a range of snowplow manufacturers ensures that fleets using mulEquipment’s products are all seasonal and weather tiple manufacturers can order dependent. There’ve also been a few other trials to
“…we want to be a company that sells an experience.”
The manufacturer of innovative wear parts for more than three decades, Willoughby, Ohio-based Winter Equipment’s blade-saving technologies have become a quality standard in the snow removal industry. Concentrating on needs of DOTs, counties, municipalities and contractors, the company’s systems provide practically engineered solutions for everything from highway and city snowplows to lightduty trucks. While the municipal sector still remains the core market, Winter Equipment’s emerging market over the last few years has turned to the private sector. “We’ve continually tried to reach that market and have specific products coming out with our technology,” said
Razor XL blades are attached to this plow.
Willoughby, Ohio-based Winter Equipment seeks to expand its offerings into the public sector.
and inventory one guard that universally fits all.
Page 68 • December 12, 2020 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
Winter Equipment Touts Its New Xtendor Plow Guard Winter Equipment photos
BlockBuster 9 ft.-system
Patriot 9 ft. LRSL guard WINTER from page 67
Crysteel Truck Equipment 52248 Ember Road Lake Crystal, MN 56055 800-722-0588 507-726-2984 (FAX) 1130 73rd Avenue NE Fridley, MN 55432 800-795-1280 www.crysteeltruck.com
Northern Truck Equipment Corp. 47213 Schweigers Circle Sioux Falls, SD 57107 605-543-5206 605-543-5219 (FAX)
drive costs down. It has to do with our technology, engineering, product development due to our relationship with Black Cat Wear Parts, working with its facilities in Asia to bring their prowess here to the United States at a fair price that allows us to be competitive in the market.” Founded in 1989 by Kent L. Winter, the first product at Winter Equipment was the PlowGuard. Since then the company has evolved to offer blade change packages called systems, to reduce the process of ordering, inventory and installation of parts. Winter offers 13 such systems catering to different segments of its client base: highways/DOT, parking lots, cities/municipalities and rural/counties. In fact, the company holds 23 patents and even a trademark for the signature shade of orange you see on its
snowplow blade products. A complete line up of hard-faced wear parts for snowplows is the core of what it makes now, including guards/shoes, nuts, washers and bolts, with 90 percent manufacturing occurring in its 20,000-sq.-ft. Ohio facilities where the company employs more than 50 staff. All team members undergo a 90-day training process, customers receive onsite training when requested and there’s a 3 to 5day instruction course for dealers as well. Winter’s dealer network is small at the moment but Kallay believes that will grow and expand as more products are introduced for the private market. The company has a presence in 30 states that comprise 97 percent of its sales, including the Great Lakes region. see WINTER page 70
3505 Edwards Street Rapid City, SD 57703 605-341-8780 605-341-8786 (FAX) www.ntecorp.com
Versalift Midwest 51761 Danview Technology Court Shelby Charter Township, MI 48315 586-991-0054 586-991-0074 (FAX) midwest.versalift.com
TGK Automotive of Ham Lake 1435 147th Avenue NE Ham Lake, MN 55304 763-413-4944 www.tgkauto.com
Crates of Razor XL Systems are ready to ship.
Winter Equipment photo
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 12, 2020 • Page 69
2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075 2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 www.truckutilities.com
387 612: ,1 ,76 3/$&( www.hiniker.com
Page 70 • December 12, 2020 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
10 Indu ustry Le eading Models s Hydraulic & PTO Snow Blowers
1-800-446-8 222
•
S ales@Hitch hDoc.com
•
www .H HitchDoc.com
M A D E IN
USA
Winter Equipment Now Offers Customers Virtual Consults WINTER from page 68
Among Winter’s top product offerings are Razor XL and BlockBuster HammerHead Carbide Cutting Edge Systems — DOTrated carbide cutting edge snowplow blades proven to last three to four times longer than typical carbide blades, according to the company — and the Patriot Steel Cutting Edge System — municipal and city-rated steel cutting edge snowplow blades. “When we go to sell an account, we are not trying to sell them ‘a’ product, we are trying to sell them ‘the’ product that they need … understand what kind of equipment they have, what road material are they plowing and determine the desired level of surface,” said Kallay on the systems sold at Winter. “Some of our systems have what’s called the WearFactor to guarantee how it would perform amongst a commodity part.” The company has a satisfaction guarantee and performance guarantee on select parts and parts generally ship in two weeks. With a focus on making parts that are more universal in nature, Winter Equipment engineered its first big product this year, the Xtendor Universal plow guard. Considering the hole pattern changes frequently on the
Winter Equipment photos
Winter Equipment’s Universal Xtendor
Guard MaxxR
blades when working with various OEMS, its steel alloy casting allows for easy installation and promotes the wear life throughout the entire guard, according to Winter Equipment. The flexibility to fit a range of snowplow manufacturers ensures that fleets using multiple manufacturers can order and inventory one guard that universally fits all. “So, whether you have a Western or a Fisher, this one part is going to fit that regardless, which makes it easier for us to sell to the customer, and we are pushing those purchases to an ecommerce online platform,” said Kallay, a 13-year employee of Winter. During his tenure, he has wit-
nessed business operations and the industry change in that time. “The biggest difference is how we communicate. Email is the preferred main driver of contact and social media has really picked up. You wouldn’t think social media would matter for a company selling industrial product to government entities,” he said. Winter has increased its email campaigns, advertising, launched a new website and now does virtual customer consults. “We have 3D printers to create scale models of our blade systems out of plastic to send to customers,” said Kallay. These are mailed to interested parties and
then meetings held virtually to explain the system’s benefits. “What Winter Equipment wants to do next season is continue to bring the technology and the quality of parts that we have developed for the municipal market to that private small truck pick up style plow market,” said Kallay. “We are looking to grow and do better. What you will see from Winter Equipment going forward is instead of being a company that’s sells a product, we want to be a company that sells an experience. We have a robust CRM and want to give you that level of experience when you deal with Winter Equipment.” CEG
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • December 12, 2020 • Page 71
SALT T & SNOW S W SPR READERS In-Stock k and Ready y to o Ship p
STRIKER UTV
LOW PROFILE 500 UTV
STRIKER TRUCK BED
TORNADO UTV
PRO-FLO 900 T TAILGA AILGA ATE
WALK-BEHIND
WESTER RN PLOWS DEALER NE ETWORK PLOWS • SPREADERS S • SERVICE E • PARTS www w.w .wester e ndealers.com 877-88 88-9215
M INNESO OTA Aspen Equipment Co. Bloomington, MN 952-888-2525 ABC Rentals South St. Paul, MN 651-451-2264 After-Hours Service Available Country Side Services Ramsey, MN 763-441-4943 Open 24 Hours After 1" of Snow Friendly Chevrolet Fridley, MN 763-786-6100 L-Z Truck Equipment St. Paul, MN 651 488 2571 651-488-2571
North Central Bus & Equipment St. Clo oud, MN 320-25 51-7252
PPMI Motor Sports Rochester, MN 507-252-8097
Russell's Automotive North Branch, MN 651-674-4000
Northland Farm Systems Owatonna, MN 800-38 85-3911
Precision Landscaping g & Construction Hastings, MN 651-437-2305
Snow Plows Plus Waverly, averly MN 763-682-5536 24 Hour Parts & Service When It Snows 2"
Park C Chrysler Jeep Burnsvville, MN 952-89 90-5337 Perry’s s Truck Repair Long Lake, L MN 952-47 73-4898 Open Most M Saturdays Evening Appointments Available Available Pod’s Tire & Wheel White Bear B Lake, MN 651 42 651-42 26 4640 26-4640
Pro Auto & Transmission on Repair Norwood, MN 952-467-3787 RecT Tech Outdoor Solutions tions Plato, MN 952-686-8711 Rule Tire & Auto Willmar, MN 320-235-1146
To oppers and Trailers Plus Mankato, MN 507-387-7376 Open Saturdays Tuesdays Until 7 p.m.
IAspen OWA Equipment Co. Davenport, IA 563-949-4045 563 949 404 45
Page 72 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Machinery Company Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900
www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 2235 Ragu Drive • Owensboro, KY 42303 Dealer 270/683-2000 • 877/683-2262 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661
Kelbe Brothers Equipment Co., Inc.
Kirby-Smith Machinery, Inc.
www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151
www.kirby-smith.com 8320 Ruby Avenue • Kansas City, KS 66111 913/850-6300
Imprint Area
4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 3101 French Rd. • DePere, WI 54115 920/343-6496
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 73
Kirby-Smith Machinery Inc.
Manitowoc crawler cranes are built to o deliver unsurpassed productivity and a value on the most ch hallenging jobsites. Manitowoc delivers: Cranes ranging fro om 73 t (80 USt) to 2300 t (2535 USt) Capacity-enhancing ng VPC-MAX® technology and ® MAX-ER attachments ments
He H eigh htt ab bov ve g groun o nd m
www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300
60,0
60 56
54,0
52 48,0
48 44
42,0
40 36,0
36 32
30,0 0
28 24 20
Optional long-reac ch booms, fixed jibs, luffing jibs and extended upper bo oom points
16 12
8,24 m TAILSWING TAILSWING
New 3.5 m wide bo oom inserts for MLC300 and MLC650
1,52 , m 2,67 m
12
20
28
36
44
52
60
68
Access current Manitowoc crawler crane load charts at www.cranelibrary.com
Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net
Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757
Manitowoc MLC650 — features the ne w 3.5 m w id e b o o m s y s t e m t o r e a c h h ig h e r a n d increase capacit y.
w www .manitowoc.com
7
Page 74 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Trauma Safety Strap Enhances Fall Protection for Construction Workers KOBELCO-USA.COM
By Ken Liebeskind CEG CORRESPONDENT
A trauma safety strap that attaches to a harness construction workers wear on the job enhances fall protection for workers. 3M of St. Paul, Minn., the company that makes the Fall Protection Suspension Safety Strap, is now including it with all harnesses it sells. “We’ve gotten feedback from frontline workers, so we’re making it a standard feature on every harness,” Tim Thomas, a 3M global marketing manager said. The product also can be purchased separately and can be offered by other harness manufacturers with its products, he said. “The safety strap is a piece of webbing rolled into a pouch with multiple web loops workers can unzip during a fall,” Thomas said, adding that it is made with sewing machines. Thomas said the safety straps can prevent specific construction fall injuries. “A potential hazard for a worker suspended upright by fall arrest equipment is orthostatic intolerance or suspension trauma. This is caused by restricted blood circulation and blood accumulating in the legs due to the force of gravity and lack of movement. It can lead to organ damage or even death, so it’s critical suspended workers be rescued quickly. Suspension trauma safety strips lessen this risk. A pair of straps are attached to a fall harness at the hips. When workers fall, they can uncoil the straps, hook them together and stand up, bracing their weight against the straps. This simple action takes weight off the arteries and restores blood circulation.” “It is a life-saving piece of equipment,” said Paul Haining, chief environmental health and safety officer of Skanska USA/New York. “If someone falls, the harness hangs from the anchor point and they’re suspended so the strap gives them a means to relieve themselves so they can stand up. They reach up to their pouches and unzip them and hook them together so pressure gets taken off and they can be suspended for a longer time without risk.” Skanska worked with 3M to promote the product in affiliation with Construction Safety Week, Sept. 14 to
Mid Country Machinery Grand Equipment Co. 3310 Hudson Trails Dr. Hudsonville, MI 49426 616-896-7700 Fax: 616-896-6700 www.grandequipment.com
Southeastern Equipment Co., Inc.
3478 5th Ave S Fort Dodge, IA 50501 800-206-5936
Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303
4734 Sergeant Road Waterloo, IA 50701 319-234-8710
1356 3rd Street Brilliant, OH 43913 740-598-3400
106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com
1500 Industrial Parkway Brunswick, OH 44212 330-225-6511 6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910
Miller-Bradford & Risberg, Inc. A trauma safety strap that attaches to a harness construction workers wear on the job enhances fall protection for workers. 3M of St. Paul, Minn., the company that makes the Fall Protection Suspension Safety Strap, is now including it with all harnesses it sells.
18, that drove awareness around measures that keep workers safe. It is working with the Construction Industry Safety Initiative Group (CISI) on the project. “The collaboration between 3M, Skanska and the CISI group is a testament of our shared commitment of eliminating incidents on site and making it a more safer and inclusive environment for all workers,” said Jeremy Saum, chair of the CISI group and safety director at J.F. Shea Construction, Walnut, Calif. According to OSHA, the leading cause of construction fatalities is falls, so harnesses are one of the most important pieces of personal protection equipment as they hold the wearer upright in the event of a fall. Suspension trauma safety straps further protect the worker by alleviating the additional health risks from suspension trauma, one of the potential hazards for a worker suspended upright by fall arrest equipment. Skanska has 7,900 employees who work at a variety of construction jobs. “When it comes to safety, we believe there should be no extra costs or other barriers associated with protecting anyone’s life,” Haining said. “Risk is an inherent part of our work in the construction industry. Our collaborative work with 3M on this universal reinforcement measure for new harnesses
is a prime example of how we are continually developing new technologies to raise construction safety standards and ensure the safest work environments on all of our job sites.” Thomas said the safety strap is part of 3M’s commitment to worker safety. “Our mission is to advance safety, and as long as there are injuries and fatalities on job sites, there will always be room for improvement. There is absolutely a need for us to drive change so every worker can go home safely at the end of the day.” Haining believes the safety straps are part of Skanska’s and 3M’s drive to reduce construction fatalities and improve worker safety. “The latest statistics on construction fatalities in the United States are from 2018, when over 1,000 people died,” he said. “Historically, we haven’t moved the needle much — over the last 20 years there are consistently 700 to 1,000 fatalities, annually. This is totally unacceptable. While there’s concerted effort to improve safety, we still have a long way to go. I’m excited about what we’ve accomplished with 3M. It’s incumbent upon us to continue working together and look for opportunities, no matter how small.” Thomas said, “All remaining North American harnesses will have suspension trauma safety straps by the end of 2021.” CEG
W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719
3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479
DeForest, WI 608-222-9191
8757 Tyler Blvd. Mentor, OH 44060 440-255-6300
Eau Claire, WI 715-832-3443
404 Breaden Rd. Monroe, OH 45050 513-539-9214
De Pere, WI 920-338-5800 Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com
6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868
Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com
4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 75
Blue Ridge Tractor
Illinois Truck & Equipment Co.
6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com
320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com
General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500
3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com
Page 76 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NDDOT Wraps Up 193 Projects as 2020 Construction Season Comes to End NDDOT completed the new Long X Bridge in 2020.
BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551
The North Dakota Department of Transportation (NDDOT) wraps up work on 193 road and bridge projects during the 2020 construction season, which is coming to a close around the state. “2020 was a tremendous year for the NDDOT and the state of North Dakota,” said NDDOT Director Bill Panos. “We invested almost $400 million into the state highway system and improved all modes of transportation throughout the state. I want to personally thank everyone who contributed to making this construction season successful and I look forward to seeing what the future holds for the state’s transportation system.” Notable projects completed in 2020 include the Demers Avenue project in Grand Forks; the Interstate 94 pedestrian bridge in Dickinson; the Fargo Main Avenue project; and the new Long X Bridge opening to traffic. Major construction projects by region include: Bismarck District: • Reconstruction of 43rd Avenue from Montreal Street to State Street in Bismarck • Milling and overlay on U.S. 83 NB/SB from Bismarck to Wilton • Milling and overlay on ND 36 from Wilton to Junction ND 14 • Main Street signals, curb and gutter, lighting, landscaping in Bismarck • Safety Corridor on U.S. 83 from Bismarck to Washburn
Dickinson District: • Surfacing and widening on ND 22 from Junction 12 to New England • Major rehabilitation on ND 8 from Junction 200 to Twin Buttes • Lighting and signals on Villard Street in Dickinson Williston District: • Concrete overlay on U.S. 2 from Blaisdell to west of Berthold • Reconstruction of ND 1804 from Red Mike Area to west of Williston • Major rehabilitation on ND 73 from Junction ND 23 to mile 6 • Bridge deck overlay on ND 23 Four Bears Bridge • Reconstruction of intersection of ND 1804 and 7th Avenue East in Williston Minot District: • Major rehabilitation on ND 37 from Parshall to 4 mi. east of Junction ND 1804 • Reconstruction of 31st Avenue from Broadway to 13th Street Southeast in Minot • Overlay on ND 37 from Garrison to Junction US 83 • Micro surfacing on ND 43 from Junction ND 14 to Junction U.S. 281 Devils Lake District: • Major rehabilitation on U.S. 2 west of Devils Lake • Major rehabilitation on U.S. 281 from Sheyenne to near Junction ND 57 • Grade raise on ND 20 north of Devils Lake
Valley City District: • Milling and overlay ND 46 from Junction U.S. 281 to Junction ND 1 • 5th Avenue Northwest reconstruction in Valley City • Milling and overlay on ND 1 from Junction I-94 North to Junction ND 26 • Main Street milling, overlay, lighting, signals, bikeway, and ramp revisions in Valley City Fargo District: • Milling and overlay on ND 32 from Junction ND 13 to Lisbon • Bridge deck overlay on I-29 3 miles north of ND 200 • Concrete median barrier on I-29 south of 17th Avenue South in Fargo • Deck overlay on 12th Avenue North in Fargo • Concrete pavement repair and chip sealing on ND 13 from I-29 to Wahpeton Grand Forks District: • Concrete overlay on U.S. 2 from Grand Forks Air Force Base to 69th Street • Milling and overlay on ND 1 from ND 26 to east of Junction ND 200 • Milling and overlay with pipe repairs on ND 1 from Lakota to near Edmore • University Avenue milling and overlay from State Street to 3rd Street in Grand Forks • 5th Street from U.S. 2 to Demers Avenue milling and overlay in Grand Forks For more information, visit dot.nd.gov.
ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606
GENERAL EQUIPMENT & SUPPLIES, INC. DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047
CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000
www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 77
ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114
3D AUTOMAT TION INCREASES ASES YOUR PRODUCTION N • Dig to grade accurately urately without slowing down wn • No worry grading because ecause there is no over diggingg • The machine ine you have been waiting for: r: Big, Fast, Accurate te
ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500
SUPP PORTED WITH PRIDE
Page 78 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo Celebrates Half-Century of Artic Haulers With LEGO Technic A60H Model KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green 270-781-1061
OHIO CAT www.OhioCAT.com Richwood 888-446-4658
WILSON EQUIPMENT COMPANY www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036
Gravel Charlie, Volvo A60H, A60H Lego model
Volvo Construction Equipment (Volvo CE) popularized the articulated hauler concept in 1966 with the birth of the 10-ton payload DR631 — fondly known as ‘Gravel Charlie.” Some 54 years later, the company is still transporting earth, gravel and a host of other materials over rough, muddy, slippery, steep or otherwise impassable terrain. Volvo CE continues to innovate with its H-Series range — which now includes its biggest ever production articulated hauler — the 60-ton capacity A60H. Just Like Real Thing In a classic case of art reflecting reality, the LEGO Technic 6X6 articulated hauler Volvo A60H model also is an impressive work of engineering. Inside its giant box are 2,193 pieces, including six large tires and heavy-duty motors. And just like the real thing, it is a technological tour-de-force, featuring app-controlled operation and a fully automatic transmission — a first for the LEGO Technic brand. The 60-ton capacity A60H (the real one, that is) is designed for heavy hauling in severe off-road operations, including quarries, opencast mines and large earth-moving operations. And the engineers from both LEGO Technic and Volvo CE wanted the new model to reflect the quality, reliability and durability of the real thing. The model certainly is big — measuring 7 in. high, 7 in. wide and a 23 in. long. It also is packed with clever features, not least the complex internal gear system — which is fully automatic and motorized — just like the real thing. The motors are well integrated and hidden under the hauler body and the cab — and the Bluetooth for the control hub is turned on by rotating the A60’s cab-top beacon. Much like all the electronic machine control systems on the real machine, the model’s Technic Control+ hub and the mobile phone application that goes with it control the model, allowing it to move forwards and backwards, steer side-to-
side and elevate and lower the dumper’s hauler body. That’s not all. Control+ also extends the play value, by setting users a number of challenges that highlight features of the machine, such as moving uphill, going through the gears and tipping the load. The model takes its influence from the ground-breaking features and latest innovations on the A60H. With matched drivetrain, automatic drive combinations, including 100 percent differential locks, all-terrain bogie, hydro-mechanical steering and active suspension, this machine is unbeatable. Fitted with an active hydraulic front suspension for higher hauling speeds in tough conditions, the A60H (the real one, again), optimizes operator comfort and stability during travel, allowing more material to be moved in a shorter time for unmatched productivity, according to the manufacturer. Fun Goes on Even After Build “More than 50 years after we showed the world what an articulated hauler can do, we are still innovating and developing the concept,” said Volvo CE’s Mats Bredborg. “LEGO Technic and Volvo CE engineers have done an amazing job of replicating the A60H in miniature. It doesn’t just look like our A60H, it also follows its philosophy of innovative engineering and clever design. The Control+ mobile app and the automatic transmission are both incredible. Even the safety features — a key element of all Volvo machines — are all present and correct.” “This is one of the more complex LEGO Technic sets of recent years,” said Niels Henrik Horsted, marketing director, Product & Marketing Development at the LEGO Group. “The clever design is a great challenge during the build process, and the new LEGO Technic Control+ app allows the machine’s functions to be remotely controlled — and the fun continues long after the build is complete, with the app challenges.” For more information, visit www.volvoce.com.
MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469
IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889
OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)
MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 79
ILLINOIS DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273
INDIANA MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469
(heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622
Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)
DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428
WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410
Page 80 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.
Roland Machinery Co.
Central Power Systems & Services
www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474
Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151
©2019 Doosan Portable Power. All rights reserved.
Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920
www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Great Bend, KS (816) 781-8070 (620) 792-1361 ALP Air, Light, Power Liberal, KS Liberty, MO (620) 624-7274 (816) 415-6700 Salina, KS Joplin, MO (785) 825-8291 (417) 726-5373 Wichita, KS Maryland Heights, MO (316) 789-7370 (314) 427-4911 Woodward, OK Springfield, MO (580) 256-6014 (417) 865-0505 Yukon, OK (405) 324-2330
MAKE POWER MOVES.
Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390
Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 81
Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650
1st Choice Equipment LLC
ABC Equipment Rental & Sales
Southeastern Equipment Co., Inc.
www.1stchoiceequipment.com
www.abcequipment.com
www.southeasternequip.com
29 Pearl Rd. Brunswick, OH 44212 888/572-3888
3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868
38525 Chester Rd. Avon, OH 44011 440/934-7368
4951 West 96th Street Indianapolis, IN 46268 317/872-4877
1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802
Alta Equipment Co. www.altaequipment.com 18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA
Page 82 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195
2018 Takeuchi TB216, OROPS canopy, Digging bucket, 7’10’’ dig depth, Rubber tracks, 15 Hp Yanmar diesel, 210 hours............................$26,910 25-26 JM Call Steve 262-373-2151
2007 New Holland W110TC, Enclosed ROPS, Cab 2017 Takeuchi TL10V2, Open ROPS, 74 Hp w/ Heat & A/C, 4 WD, 23,100 lbs operating weight, Kubota T4 diesel (no DEF), 2,520 lbs operating 8,708 hours..................................................$32,000 capacity, 610 hours......................................$40,170 25-26 JM 25-26 JM Call Steve 262-373-2151 Call Steve 262-373-2151
2012 Volvo SD25D, OROPS, 42’’ wide smooth drum w/ drum drive, 44 Hp, 500 hours........$32,750 25-26 JM Call Steve 262-373-2151
Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200
2018 Carlson CP130, s/n 109DB8P, 520 Hrs, Contractor deluxe package.......................$189,900 call STEVE @ 630-878-8765 25-26 JM
2014 Ditch Witch SK755, 1400 Hrs, wide tracks, 32.5 hp turbo engine, pressure relief hyd. couplers, 44” dirt bucket..............................................$22,400 Call Jeff @ 630-665-5600 25-26 JM
2015 Grove GHC 55 Tele Crawler, 55 Ton, 100’ Main Boom + jib Aux Hoist, Certified 2500 Hrs, original owner, Cleveland, Ohio.....................CALL Call Andy Forepaugh 216-316-1511 25-26 EB
2014 Manitowoc 8000 80 Ton Crawler, Request Boom Jib Combination Certified, Cleveland, Ohio ... .......................................................................CALL Call Andy Forepaugh 216-316-1511 25-26 EB
2017 New Holland C232, 2 Speed, Open ROPS, EH Controls, Block Heater, Turn Signals, 78” Low Profile Bucket with Bolt on Edge dwietbrock@ronsonequipment.com 25 JM
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 25-26 EB
2008 Case SV212D, s/n DDD001139, 2352 Hours, ROPS, 87” Smooth Drum Roller ................$42,000 Call JR @ 630-310-7639 24-25 JM
2017 DD120C, w/Intelligent Compaction and Pass Counting, #7540 ...........................................$97,000 24-25 JM 800-283-1336
2015 Leeboy 8500C, s/n 122257, 2750 Hrs,
2007 DD138HF Roller, (s/n: 194909) 4300 Hours, Paving Width 8’-15’, Heated Screed, Legend 84” Drum Width, #5671................................$22,500 Screed System ............................................$59,900 25-26 JM 800-283-1336 Call Steve @ 630-878-8765 24-25 JM
2012 Ditch Witch RT45, with Backhoe in Excellent Condition, 428 Hrs................................................$36,500 25-26 EB Call Tania 614-443-9751 x237
SEE YOUR BARGAIN
1994 Blaw Knox PF150 8’ Paver with Deutz Diesel Engine, 8’ screed with hydraulic strike offs, approximately 2,900 hrs use...............$15,00 as is 24-25 JM 800-283-1336
2017 Komatsu PC240LC-11, 177 HP, 56,360# operating Weight, 19' 2" Boom, 11' 6" Arm, 31.5" Grouser, EROPS, Heat, AC, Rear View Camera, 1 or 2 Way Aux Hyd, Center Roller Guards, Hyd Quick Coupler, Auto Lube System, 28" Toy Bkt w/Teeth, 2 Buckets, Komatsu Care Certified, 12 Month 1,000 Hour Premier Warranty Good Through 12-31-20 ....................................$247,500 Call Dan Rude 605-336-0411 25-26 PK
AD IN COLOR 2016 Hyundai HX160L, One owner, 10’ 2’’ Long arm, 137 HP Perkins Engine, 3,300 hours...$72,000 24-25 JM Call George 219-696-8911
ONLY $60 EXTRA FOR TWO INSERTIONS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 83
GET YOUR BUTT IN THE SEAT. SCHEDULE A DEMO WITH YOUR LOCAL DEALER ©2020 SANY America, Inc.
2841 Verona Rd • Verona, KY 41092 859-485-8500 • Fax: 859-485-8573 www.newmantractor.com
11745-R Lackland Road • St. Louis, MO 63146 314-427-4911 www.cpower.com
Onyx Circle Award... The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195
Caterpillar V-PAT 6-Way blade & all supporting 1998 Ingersoll Rand DD24 Roller #8308, #8308 ... frame, hydraulic cylinders & hoses. All like ......................................................................$6,750 NEW condition! Off D6 XL .........................$9,750 800-283-1336 24-25 JM 24-25 EB Dan 859-707-8212
Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at
800/523-2200
John Deere Names McCoy Top-Performing Dealership John Deere Construction and Forestry Division has named McCoy Construction & Forestry as a 2020 winner of its Onyx Circle award. The award honored John Deere’s top-performing dealers in terms of earning customers’ business, as determined by key performance metrics. McCoy Construction & Forestry (MCF) was recognized as being the top-performing dealership among this year’s honorees. MCF, which has seven locations in Minnesota, Wisconsin and the Upper Peninsula of Michigan, joined the McCoy Group family of companies in 2018. The acquisition of McCoy Construction & Forestry broadened the McCoy Group’s portfolio of companies, which had previously focused on the transportation/trucking industry. “Earning this achievement is remarkable, considering MCF is in just its second full year of operation,” McCoy Group President Greg McCoy said. “This award is a culmina-
tion of a phenomenal effort by our team, ranging from sales, service, parts, I.T., marketing, finance and everyone in between.” “We are extremely proud of our employees and the dedication they give each day,” MCF President Jeff Herkert added. “2020 has been challenging for everyone, but our teammates have risen to the occasion to serve our valued customers.” “Over the last year, McCoy Construction & Forestry has been able to produce outstanding results on behalf of their customers and John Deere, and we feel that deserves this significant recognition,” said David Thorne, senior vice president of sales & marketing for John Deere’s Worldwide Construction & Forestry Division. “We congratulate them for their hard work and success, and more importantly, we thank them for being invaluable partners for John Deere.” For more information, visit mccoycf.com/.
Page 84 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings
on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted
WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX270C EXCAVATORS. LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX200LC, EX270LC, EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@EQUIPMENT-ANDPARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F PLEASE. EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––
WANTED (US): CATERPILLAR 966F II WHEEL LOADER; LOOKING TO BUY CAT 966F 2 ANY CONDITION, LET ME KNOW. EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS PLEASE QUOTE ME, IF YOU HAVE ANY SURPLUS EQUIPMENT. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR EXCAVATORS – WHEEL LOADERS, GRADERS, ALL MODELS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 ––––––––––––––––––––––––––––––––
WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLARAME EXCAVATORS, ALL MODELS. LOOKING TO BUY USED CONTRACTION WITH WHOLESALE. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU EXCAVATORS, ALL MODELS. LOOKING TO PURCHASE ANY HEAVY EQUIPMENT OR TRUCKS! EMAIL: JDLANDWORXEQ@GMAIL.COM; PHONE: 910-585-1608 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAS AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS. ALSO WE BUY OLD CAT MACHINES. EMAIL: USA@GCESEQUIPMENT.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 988A WHEEL LOADER. I SEEK TO PURCHASE A CAT 988A THAT IS IN WORKING ORDER, WITH GOOD TIRES AND A BUCKET WITH TEETH. EMAIL JIMTHORNTON@STNY.RR.COM OR CALL 607-483-2383. –––––––––––––––––––––––––––––––– WANTED (PA): FORD F250 SUPER DUTY PICKUP TRUCK, WITH 6.4 DIESEL, ANY CONDITION. EMAIL HARLOWCONTRACTING@YAHOO.COM OR CALL 267-738-5984. –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS OF CATERPILLAR CRAWLER LOADERS OR ANY USED CONSTRUCTION EQUIPMENT WITH WHOLE SALE PRICE. EMAIL AMERICAUSEDEQUIPMENT@ GMAIL.COM OR CALL 657-236-7504. –––––––––––––––––––––––––––––––– WANTED (PA); GARWOOD 75B CRANE, ANY CONDITION OR ANY ATTACHMENTS. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): KOEHRING 1066 EXCAVATOR, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE 860 SCRAPER TRANSMISSION, ANY CONDITION. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM ––––––––––––––––––––––––––––––––
WANTED (USA): AKERMAN MOTOR GRADERS, ALL MODELS. PLEASE LET US KNOW IF YOU HAVE ANY MACHINE LIKE THIS (WORKING OR NON). EMAIL: HIEEQUIPMENT@GMAIL.COM; PHONE: 775-235-8837 –––––––––––––––––––––––––––––––– WANTED: 3-AXLE, HEAVY DUTY LOW BOY TRAILER FOR HAULING A CAT 963. EMAIL: BENHOOVER@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CT): CASE 1455B CRAWLER LOADER. EMAIL: HENRYINDUSTRIES@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (IL): NEED MANUALS AND PARTS FOR 1970 BARBER-GREENE TF-30 DRAINAGE TRENCHER (TILING MACHINE). EMAIL: JL.FOMAC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 –––––––––––––––––––––––––––––––– WANTED (CA): BOBCAT T550 COMPACT TRACK LOADER. EMAIL: CINDYLARK4@MSN.COM –––––––––––––––––––––––––––––––– WANTED (PA): REXWORKS INC MAXIGRIND 425 GRINDER. EMAIL: HENRYINDUSTRIES@YAHOO.COM; PHONE: 814-371-8010 –––––––––––––––––––––––––––––––– WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 –––––––––––––––––––––––––––––––– WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM ––––––––––––––––––––––––––––––––
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 85
BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME
Marc Murphy, VP of Construction
WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers
CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers
CONSTRUCTION
Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087
Call Today: 610-941-0100 • Email: info@magellangroup.com
www.magellangroup.com
Page 86 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Las Vegas, NV Sat., December 12, 2020 For: Large Aerial Lift, Forklift, Construction Equipment & more • Whitney Point, NY Sat., December 12, 2020 For: Year End Construction & Farm Equipment Auction & more • TIMED ONLINE (TX) December 12 – 16, 2020 For: United Rentals All Rental Fleet Late Model Equipment Auction • TIMED ONLINE (NJ) December 12 – 16, 2020 For: Large Quantity Attachments & Support Equipment • TIMED ONLINE (OK) December 13 – 17, 2020 For: United Rentals All Rental Fleet Late Model Equipment Auction • Johnston, RI Fri., December 18, 2020 For: Retirement Auction • ONLINE Fri., December 18, 2020 For: Late Model Construction Equipment (Mexico) • Atlantic City, NJ Sat., December 19, 2020 For: Very Late Model Rental Fleet Construction Equipment & more • Albany (Greenwich), NY Wed., December 30, 2020 For: Year End Auction Late Model Construction Equipment & more
• Orlando, FL February 15 - 20, 2021 • Phoenix, AZ March 5, 2021
To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • ONLINE ONLY December 1 - 13, 2020 For: Poughkeepsie, NY Vehicle & Equipment Auction BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Online/Sacramento, CA Sat., December 12, 2020 For: Monthly Public Auction • Online/Woodburn, OR Sat., December 19, 2020 For: Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY December 15, 2020 • ONLINE ONLY December 22, 2020 • ONLINE ONLY December 29, 2020 BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY December 16, 2020 • ONLINE ONLY December 23, 2020 • ONLINE ONLY December 30, 2020
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 All our auctions are now online bidding only! • Great Lakes Regional Event December 15 - 16, 2020 • Chehalis, WA December 16, 2020 • Northeast Regional Event December 16 - 17, 2020 • Great Plains Regional Event December 17 - 18, 2020 • Chehalis, WA December 18, 2020 • Midwest Ag Timed Auction December 18, 2020 • Houston, TX February 9 - 10, 2021
Coming Auctions Auction • ONLINE ONLY December 1 - 14, 2020 For: Pike Auction. Construction Equipment, Trucks & Trailers HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Marietta, PA December 10 - 12, 2020 For: 3-Day Winter Contractor’s Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., February 12, 2021 For: Trucks, Trailers & Equipment Consignment Auction I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE ONLY Wed., January 20, 2021 For: Heavy Equipment, Truck & Trailer Auction J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163 • TIMED ONLINE ONLY Wed., December 16, 2020 For: Online Auction for Rome, NY
• ONLINE ONLY January 6, 2021 • ONLINE ONLY January 13, 2021 DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853 • Stoutsville, OH Sat., December 12, 2020 For: Winter Columbus Heavy Equipment Truck & Trailer Auction HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012 • ONLINE ONLY Nov. 19 – Dec.14, 2020 For: Biehl Construction Co., Inc
JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • ONLINE ONLY December 9 - 16, 2020 For: Construction Equipment, Log Home Mfg. & Rolling Stock JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • ONLINE ONLY Tues., December 15, 2020 For: Surplus Items from Ohio Contractors, Vistra Energy & Others
• ONLINE ONLY Wed., December 16, 2020 For: Year End Equipment & Tool Auction
Sat., December 12, 2020 For: Public Auction: Truck Tractors, Trailers, Forestry Line PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Tues., December 15, 2020 For: Government Auction
• Stanton, TX Wed., January 13, 2021 For: Permian Basin Unreserved Public Auction
• ONLINE ONLY Tues., December 15, 2020 For: City of Kansas City MO Auction
• Gillsville, GA Tues., January 19, 2021 For: Contractor Inventory Reduction Public Auction
• ONLINE ONLY Wed., December 16, 2020 For: Vehicles & Equipment Auction
McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • ONLINE ONLY Tues., December 15, 2020 For: Virtual Live Farm & Construction Equipment • ONLINE ONLY Tues., December 22, 2020 For: Virtual Live Farm & Construction Equipment • ONLINE ONLY Tues., December 29, 2020 For: Virtual Live Farm & Construction Equipment MANASSE AUCTIONEERS www.manasseauctions.com 607-692-4540 • Whitney Point, NY Sat., December 12, 2020 For: Year End Farm & Heavy Equipment, Truck & Trailer Auction MEEKINS AUCTION COMPANY www.meekinsauction.com 910-739-0547 • Lumberton, NC Tues., December 29, 2020 For: 26th Annual Construction Truck Auction MIDEAST EQUIPMENT SUPPLY www.mideastequip.com 860-370-9993 • LIVE VIRTUAL Tues., December 15, 2020 For: Major Construction Equipment Auction PIRRUNG AUCTIONEERS, INC. www.pirrunginc.com 585-728-2520 • Woodland, PA
• ONLINE ONLY Wed., December 16, 2020 For: Great Plains Kubota Auction
• TIMED ONLINE ONLY December 11 - 21 2020 For: Kibble Equipment Auction • Mt. Pleasant, IA Thurs., December 17, 2020 For: AgIron Event • ONLINE ONLY December 18 - 23, 2020 For: Timed Online Upper Midwest Locations THOMAS HIRCHAK COMPANY www.THCAuction.com 800-634-7653 • ONLINE ONLY Thurs., December 17, 2020 For: Well Drilling & Construction Equipment (VT)
• ONLINE ONLY Thurs., December 17, 2020 For: Construction Equipment
UNITED EDGE REAL ESTATE & AUCTION CO., LLC unitededgerealestateandauction.com 419-298-1100
• ONLINE ONLY Thurs., December 17, 2020 For: Floyd’s Inc. Inventory Reduction Auction
• ONLINE ONLY Ends Wed., December 23, 2020 For: Pahl’s Ready Mix Surplus Equipment Auction
• ONLINE ONLY Tues., December 29, 2020 For: Truck & Trailer Auction • ONLINE ONLY Tues., December 29, 2020 For: Vehicles & Equipment Auction RES AUCTION SERVICES www.RES.bid 833-SOLD-RES • Wooster, OH Sat., December 12, 2020 For: Huge Selection of Construction & Farm Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., December 12, 2020 For: Heavy Machinery, Farm Equipment, Trucks & Trailers Onsite & Online RTI AUCTIONS www.teitsworth.com 585-243-1563
VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Live Virtual Auction Sat., January 23, 2021 For: January 2021 Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • ONLINE ONLY Fri., February 5, 2021 For: Construction Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., December 12, 2020 For: Live Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990
• ONLINE ONLY December 8 - 15, 2020 For: December NetAuction
• Norwalk, OH Thurs., December 17, 2020 For: Mark Haynes Construction Auction
STEFFES GROUP INC. www.steffesgroup.com 701-237-9173
• Kissimmee, FL February 10 - 13, 2021 For: 47th Annual Florida Auction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 87
Page 88 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Growing Inventory...
Ritchie Bros.’ 2021 Yoder & Frey Prepares to Attend 2021 Orlando Auction Kissimmee Winter Auction in Florida Set for February Yoder & Frey, auctioneers of heavy construction and agricultural equipment and the founders of the Kissimmee Winter Auction, is preparing for its biggest sale of the year, scheduled for Feb. 10 to 13, 2021, in Kissimmee, Fla. Following a successful year, with exceptional consignments of first-class heavy construction inventory selling well at all sales throughout 2020, consignors are now committing to the upcoming Yoder & Frey in February 2021 at Florida #47. With a growing inventory of heavy construction machinery, dump trucks, dozers, telehandlers, buckets and attachments, as well as commercial vehicles and a large compliment of diesel engines, Yoder & Frey is inviting more consignors who want to turn their stock into cash. The Yoder & Frey format for Florida #47 will be a live sale, with
three rings and a live ramp with buyers able to personally inspect any of the pieces of equipment catalogued presale. Yoder & Frey will be insisting all visitors attending adhere to all standard COVID guidelines in place at that time. With continued expansion following the merger in 2017 with Europe's leading auctioneers, the Euro Auctions Group, Yoder & Frey is gaining a reputation for global reach as well as providing excellent "home market" support. A new sales team and network of territory managers who cover the entire United States are able to provide tailored advice to consignors wishing to sell, as well as assisting buyers who may be first-timers. As part of the Euro Auctions Group, Yoder & Frey now markets to an international buyer base, not just in the United States, but in 95 countries around the globe, resulting in an
increase in online bidding at all sales, with 50 percent of all bids placed via the internet. “Throughout 2020 Yoder & Frey have continued to deliver a full program of auctions, including many high-profile ‘off site’ sales for specialist coal and general mining companies, general contracting and rental roll-out auctions,” said Peter Clarke, founder and CEO of Yoder & Frey. “In addition, we are seeing an increase in the quantity and diversity of equipment being consigned to our auctions, attracting new consignors, increasing bidder turnout, resulting in our auctions achieving record hammers. Our customers like our culture, our can-do attitude, the fact we care about our consignors and buyers, and that we do go the extra mile at all sales.” For more information or to preregister for the auction, visit yoderandfrey.com.
New Off-Board Rapid Charger to Suit All Current, Future JCB E-TECH Machines
With the dates recently set, Ritchie Bros. already is accepting consignments for its massive, six-day Orlando auction on Feb. 15 to 20, 2021. “We’re very excited to announce our 2021 auction dates for our ‘Premier Global Auction’ in Orlando, Florida, and, while a lot has changed since our February 2020 Orlando event, Ritchie Bros. remains as dedicated as ever to helping customers by making buying and selling equipment easier than ever,” said Kari Taylor, president, North American Sales, Ritchie Bros. “Since mid-March we have been conducting our auctions 100 percent online and have seen bidder registrations and buyer demand grow exponentially thanks to our unmatched marketing efforts and customer confidence in our online platform.
“Orlando is our biggest event of the year, with equipment from across the United States and around the world.” Kari Taylor Ritchie Bros.
“For Orlando 2021 we will continue to leverage our technology and incorporate our learnings into the ultimate aucJCB has developed a new rapid universal charger, compattion experience.” ible with current and future E-TECH electric models. In 2020, Ritchie Bros. has seen website traffic increase by Working with machine electrical systems from 48V to 35 percent to more than 27 million visits, while bidder regis96V and above, the JCB universal charger offers customers a trations are up 71 percent to more than 817,000 registrations. future-proofed off-board rapid-charging solution, to allow Once online, buyers are extremely active, watchlisting extended working capability with battery electric construcmore than 680,000 items and making more than 300,000 tion and industrial machinery, according to the manufacturer. PriorityBids. As of mid November, Ritchie Bros. has online All JCB E-TECH equipment is supplied from the factory buyers approved with more than $57 billion in purchasing with a standard built-in charger and rapid charger preparapower. tion, allowing customers to simply and quickly cap off the “Orlando is our biggest event of the year, with equipment charge and return to work. The charger unit, which is availfrom across the United States and around the world,” added able through JCB dealers and JCB Parts, can be easily Taylor. “This week we held our final Orlando auction of installed at any site offering 480V three-phase electrical sup2020 and saw online registrations increase 51 percent year ply. over year. We encourage interested sellers to contact us as By offering a universal charger, rather than chargers dedisoon as possible. Let us start marketing your assets to buyers cated to each product line, JCB is delivering a single rapidacross the globe. Count on us to bring a world of buyers at charge solution, which can be used across a fleet of machines the Premier Global Auction.” on site or in the yard. The unit can recharge the 19C-1E elecRitchie Bros.’ annual February Orlando auction features tric mini-excavator from zero charge to full in just 2.5 hours, more than 200 acres for equipment display. The February allowing for quick turnaround and boosting productivity 2020 event featured more than 13,000 equipment items and potential, the manufacturer said. attracted 18,000 bidders from 85 countries. The JCB universal charger requires a standard 480V threeCompanies and individuals looking to sell equipment and phase electrical supply and comes with both four and five-pin trucks in the February 2021 Orlando auction should contact connectors, to suit site power provision across Europe. It also their local sales representative or contact the Orlando site The unit can recharge the 19C-1E electric mini-excavawill be offered in the North American market and across the directly at 855/331-5789. tor from zero charge to full in just 2.5 hours, allowing world. for quick turnaround and boosting productivity potential. For more information, visit rbauction.com/orlando2021. For more information, visit www.jcb.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 89
CON S T RUC T ION E QUIP ME N T
450+ ITEMS SELL
AUCTIONS
NO RESERVE! Straight. Simple. Sold.® D DH0554 ‘98 CAT D8R cable plow c
THURRSDAY AY, DECEEMBERR 17
D DG4657 ‘14 CAT 924K high lift wheel loader h
BIDDING STA R T S TO CLOSE AT 10 A .M. CS
DJ6702 ‘16 Kubota SVL952S tracked skid steer
DJ8794 ‘12 CAT D6T XL VP dozer
DJ2295 ‘12 CAT D6T XL dozer
DJ6729 ‘08 08 Sterling Sterling LL-Line crane truck
DJ8515 ‘07 07 Terex T560 T560-11 crane
DJ8514 ‘14 14 Zoomlion RT60 crane
HE9919 ‘14 14 John Deere 135G excavator
DJ6728 ‘09 D 09 CAT D5K XL dozer
FG9 9687 ‘10 10 Ditch Witch JT922 directional boring unit
DH0553 ‘06 John Deere 310SG backhoe
DJ5775 ‘14 Kenworth T370 service truck
DF5740 ‘98 CAT 135H motor grader
DD6157 ‘14 CAT 236D skid steer
F W9836 ‘13 Case 580 Super N backhoe
DJ2 2082 ‘06 John Deere 9520 Scrraper Special 4WD tractor
INVENTORY INCLUDES: dozers, skid steers, excavators, c cranes, crane truck, backhoes, d drum rollers, wheel loaders, vacuum trucks, service trucks, ro oll-off container trucks, bucket trucks, dump trucks, mini excavators, fuel truck, wood chipper, boom lifts, equipment trailers, tractor, telehan ndlers, drilling rig, cable plows, reel trailers, and more. All items are sol s d “AS “AS IS.” I 10% buy uyers premium m applies. Aaron McKe Kee TX TX L Lice ense #16401.
purppleewavee.com ccom BID NOW!! pu
Page 90 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Rail Project Will Follow Construction of Heavy Haul Route CORRIDOR from page 66
WSP photo
Crews blasted rock to make way for the new heavy-haul road.
Indiana Economic Development Corporation, Ports of Indiana, Kentuckiana Regional Planning and Development Agency, Clark County, Jeffersonville Redevelopment Commission and River Ridge Development Authority teamed with INDOT to develop the project. “By means of an inter-local agreement, the many stakeholders have been working on this for some time,” said Ron Heustis, INDOT project manager. “The effort has been closely coordinated with the East End Crossing project and work on other local routes in the area. The section of the Heavy Haul Transportation Corridor from SR 265 into River Ridge was completed and opened in 2017, shortly after the opening of the East End Crossing. The section from SR 265 into the Port will complete the corridor when opened.” According to INDOT’s website, acquisition of right-of-way for a new rail connection between River Ridge and the Ports of Indiana is scheduled to begin after the Heavy
WSP photo
Cat machines excavate material from South Pond.
Haul Corridor has been completed. The right-of-way acquisition will require a separate environmental study from the Heavy Haul Transportation Corridor report. This new corridor would allow for future construction of a rail line that would enable Indiana’s Ohio River port to increase freight capacity and transfer bulk ship-
ments more efficiently from tracks and rail to barges. The estimated cost of the right-of-way is $1.3 million. The Heavy Haul Transportation Corridor project is funded by a combination of state, federal, local and private dollars. The project is expected to be complete by fall of 2021. CEG
Be Sure to Date-Stamp Your Photos, Says Insurance Firm ANALYSIS from page 24
Therefore, the pre-construction survey should be completed just prior to a contractor’s beginning work on their portion of the project, according to American Family. Engineers who specialize in evaluating the specific structure type can correctly identify structural components, said Kolenda of EBA Engineering. “This is valuable for finding hidden or concealed damage, and using the right techniques to measure existing damage,” he said. Engineers may use lifts, boats, drones and ladders — “anything necessary to access the locations they need,” he said. They will collect photographs, high-definition video and measurements to document each existing defect, which is then cataloged based on location, defect type and severity. “This information is compiled into a unique report for each structure or building to give contractors the information they need to evaluate any claims from nearby property owners,” he said. Condition surveys require authorization from the property owner, and a right-ofentry agreement with each owner must be in place before work starts, he continued. Pre-construction condition surveys give contractors and owners an important tool to
manage risk on their projects. When a claim arises, engineers can quickly conduct an intermediate inspection or post-construction condition survey to compare defects against the baseline conditions established at the project’s start. “The information can be used to assist in structural evaluation of damaged structures and minimize the extent of any needed repairs. Or, in the case of perceived structural damage, the information can be used to clear the contractor from blame,” added Kolenda. Being Neighborly American Family’s loss control division urges contractors to contact and advise area residents of the work to be done. “This is good public relations,” the company wrote in a blog post. “In most states, property owners do not have to permit surveys of their properties. However, refusal to have their property surveyed may be used to the contractor’s advantage in the event of a subsequent damage claim,” noted the insurance company Structure surveys may include written building condition reports by a registered professional engineer covering foundations, exterior and interior walls, floors, ceilings, roof, chimney and other structural compo-
nents. The reports also should cover the piping, heating and air conditioning units, hot water tanks, and other delicate machinery or equipment in the building. Photographs should be taken by an independent commercial photographer, under the direction of the professional engineer. The photos should be properly labeled, dated and notarized to certify that they are accurate and true copies of conditions on the day they were taken. Black and white photographs are preferable to color, as they show more detail. Date-stamp cameras help to provide documentation. Specific cracks or existing deterioration should be described in detail, measured and photographed. Benchmarks and/or survey points for vertical and horizontal references established by a licensed land surveyor to check for settlement and movement of building, roadways and shoring systems should be noted. Subsequent readings can be taken periodically by the contractor’s survey crew to detect any ground movement. If unanticipated movement takes place, revised work procedures or corrective work should be considered immediately. Videotape the project area and existing structures to help document conditions. An
independent consultant directed by the professional engineer should complete this, properly labeling and verifying the date. Ground water levels and water levels in adjacent wells should be recorded and checked periodically, according to American Family’s Loss Control Resource Center. An independent qualified consultant should complete seismograph monitoring of surrounding vibration-producing operations (other than construction), noted the company. The results should be recorded and kept on file. Blast logs and shot pattern records should also be compiled and kept on file. Post-construction surveys also are important to establish conditions at the completion of the project, said Koppang of Travelers Insurance. He urges contractors to document the conditions prior to mobilizing off any site. “It can go a long way to refute erroneous allegations,” he said. This would include subcontractors capturing as-built conditions prior to turning over to the next contractor at the completion of their work. Ultimately, though, “taking steps to protect your construction site in advance can help keep workers safe and avoid costly construction claims,” said Koppang. CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 91
Page 92 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Online Only Heavy Equipment Auction Ending December 23
Dozers, Loaders, Articulated Dump Trucks, Trailers, Tiling Equipment, Forklifts, Backhoes, Dump Trucks, Pans, Graders, Material Buckets, Parts & More www.BidWithUnitedEdge (419) 298-1100 Auctioneer: Darren Bok, CAI, CAS
To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com
Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. DECEMBER 2020/JANUARY 2021 CRANE SAFETY COURSES December 15 – December 18, 2020 Overhead Crane Inspector Training, Orlando, FL January 4 – January 8, 2021 Mobile Crane Operator Training, Orlando, FL January 5 – January 8, 2021 Mobile Crane Inspector Training, Cincinnati, OH January 5 – January 8, 2021 Overhead Crane Inspector Training, Houston, TX January 11 – January 12, 2021 Qualified Signal Person Training, Orlando, FL January 11 – January 15, 2021 Mobile Crane Train The Trainer, Houston, TX January 12 – January 15, 2021 Overhead Crane Inspector Training, Cincinnati, OH January 13 – January 14, 2021 Critical Lift Planning & Lift Director Training, Orlando, FL January 18 – January 20, 2021 Rigging Inspector Training, Cincinnati, OH January 18 – January 22, 2021 Overhead Hoist Maintenance Training, Houston, TX January 20 – January 22, 2021 Aerial Work Platform Train The Trainer, Orlando, FL January 25 – January 26, 2021 Crane Assembly & Disassembly Director Training, Houston, TX January 26 – January 29, 2021 Overhead Crane Train The Trainer, Cincinnati, OH
ASSOCIATED GENERAL CONTRACTORS OF AMERICA (AGC) Virtual Crane Management in Construction Safety Training Dates: December 17 – 18, 2020 Times: 8:00am - 5:00pm AGC of America, supported by a Susan Harwood Federal Training Grant, developed the Crane Management in Construction Safety Training. According to the Bureau of Labor Statistics (BLS), from 2011 to 2015, the Census of Fatal Occupational Injuries (CFOI) reported 220 total cranerelated deaths, an average of 44 per year over this 5-year period with 42% of the fatal work injuries taking place in the private construction industry. The data also shows that specialty contractors and heavy and civil engineering construction accounted for the most fatalities involving cranes in private construction. AGC of America is pleased to offer this FREE, one-day training program based on OSHA standards and best practices to answer the need for quality training within the industry. The course will be delivered via Zoom Meetings and continuing educations credits will be offered. • A World Renown Keynote Speaker • Watch live and recorded sessions from top industry speakers • Lively and engaging market forums with panelists • Games and prizes throughout the event and during our social networking hour • A fun celebration with award level reveal at our Excellence in Concrete Pavement Awards ceremony • Opportunities to network and chat with attendees • Learn about exciting new products and services within the exhibitor hall This training event will be FREE for members as well as nonmembers. To register for this event, please visit
www.agc.org/learn/education-training/events/crane-man- National Pavement Expo (NPE) brings vendors and conagement-construction-safety-training/. tractors together who make their living from asphalt and concrete paving, sealcoating, striping, sweeping, crack MINESOTA NURSERY & LANSCAPE ASSOCIATION (MNLA) repair, pavement repair, and snow removal to network with & MINNESOTA TURF AND GROUNDS FOUNDATION (MTGF) other paving professionals and attend industry workshops. Northern Green Virtual 2021 In addition to hosting 200+ leading brands from the paving Dates: January 11 – 14, 2021 and pavement maintenance industry, NPE delivers more Description: The Northern Green Expo is the largest trade than 50 conference sessions over a 4-day span. Whether show and educational conference in the north central region you want to increase industry knowledge, sharpen your dedicated exclusively to green industry professionals. Even skills, improve efficiency, or learn about the latest and greatin an industry where every year is different, 2020 has been est products, you can do it all here! exceptional. Despite our hope to hold an in-person event in Workshops and education sessions will cover a variety of January, Northern Green is going online. Using a dedicated virtual event platform, Northern Green will topics from leaders in the Paving Industry highlighting innoinclude a keynote address, educational sessions, coffee vative practices, critical issues, and more! chats, exhibits, awards presentations, networking and more! For more information and to register for this event, please To learn more about how Northern Green Virtual benefits visit https://www.nationalpavementexpo.com/attendee/. you, check out this post on their blog: https://northernNATIONAL UTILITY CONTRACTORS ASSOCIATION (NUCA) green.org/dontmissngvirtual. You’ll also receive access to customized exhibitor landing 2021 NUCA Annual Convention & Exhibit pages and on-demand education sessions will be available Dates: February 4 – 6, 2021 post-event until September 1, 2021. Location: Naples Grande Beach Resort To register for this event, please visit 475 Seagate Dr., Naples, FL https://northerngreen.org/. NUCA is headed back to the Naples Grand Beach resort for our 2021 annual meeting & convention. We are excited to NATIONAL PAVEMENT EXPO AND CONFERENCE 2021 revisit an amazing property located on the beautiful beaches Dates: January 20 – 23, 2021 (Conference) of Florida for another terrific convention! January 20 – 22, 2021 (Exhibit Hall) It’s time to get out of the office and talk shop with your fellow Location: Music City Center NUCA contractors from across the country who, as compaNashville, TN ny principals, face the same problems you do every day. Note: *The health, safety, and wellbeing of every attendee, exhibitor, speaker, and staff is our number one priority. We Problem solving with fellow NUCA members can energize are closely monitoring COVID-19 and its potential impact you so you can step back into the office and tackle your on plans to host National Pavement Expo and Conference business with a new perspective, galvanize your employin Nashville. Should the in-person event not be able to take ees, and use what you’ve learned to improve your day-toplace, we are looking at a virtual exhibit hall and conference day operations. experience to meet the needs of all industry stakeholders. It For more information on the annual NUCA Convention & is our promise to provide updated details as soon as pos- Exhibit, please contact Chris Barrett at chris@nuca.com or phone 703.358.9300. sible.*
Events are subject to change, check websites for updates
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 93
Page 94 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC ....................................................12 ALLIED CONSTRUCTION PRODUCTS ..................................................42 ALTA EQUIPMENT COMPANY ................................................................96 AMERICAN STATE EQUIPMENT ..............................................................7 AMULET ..............................................................................................52,55 ASCENDUM MACHINERY INC ................................................................11 ASLAN GPS ..............................................................................................26 ASPEN EQUIPMENT................................................................................71 BANDIT INDUSTRIES INC ..................................................................44,45 BARGAINS ..........................................................................................82,83 BLUE RIDGE TRACTOR ..........................................................................26 BOSS PRODUCTS ..................................................................................68 BROOKS TRACTOR ................................................................................21 BRYAN AUCTION ....................................................................................87 CEG SCALE MODELS ............................................................................28 CONSTRUCTION EQUIPMENT GUIDE ..............................27,30,50,84,91 CSTK JCB ................................................................................................16 CUSTOM MADE PRODUCTS ..................................................................16 DOOSAN..............................................................................................48,49 DOOSAN PORTABLE POWER ................................................................80 DURA TECH INDUSTRIES ......................................................................42 E TIP INC ..................................................................................................29 ERB EQUIPMENT COMPANY..................................................................15 ESCO CORP ............................................................................................53 FABICK CAT................................................................................................2 FAE USA INC ............................................................................................41 FARM-RITE EQUIPMENT INC ................................................................17 FELLING TRAILERS............................................................................60,61 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................25 FOLEY EQUIPMENT CO............................................................................9 GARY CARLSON EQUIPMENT ..............................................................23 HINIKER....................................................................................................69 HITACHI CONSTRUCTION MACHINERY ..............................................72 HITCH DOC ..............................................................................................70 ILLINOIS TRUCK & EQUIPMENT ..............................................................3 IRAY AUCTIONS INC................................................................................92 ISUZU DIESEL..........................................................................................16 JEFF BELZER DODGE ............................................................................62 JET TRAILERS ........................................................................................58 JJ SCHECKEL CORP ..............................................................................10 JOHN DEERE ..........................................................................................95 KIRBY-SMITH MACHINERY INC..............................................................19 KLEEMANN ..............................................................................................43
KOBELCO CONSTRUCTION MACHINERY ......................................74,75 KOMATSU AMERICA CORP ..............................................................76,77 KPI-JCI ......................................................................................................39 KUBOTA EXCAVATOR..............................................................................81 LABOUNTY MANUFACTURING INC ......................................................55 MAGELLAN CONSTRUCTION ................................................................85 MANITOWOC CRANE GROUP................................................................73 MAVERICK ENVIRONMENTAL ................................................................33 MB AMERICA INC ....................................................................................41 MCCANN INDUSTRIES INC ......................................................................6 METSO OUTOTEC ..................................................................................37 MID COUNTRY MACHINERY ..................................................................59 MIDWEST MINE SERVICES ..............................................................34,35 NORAM ................................................................................................78,79 PAT KELLY EQUIPMENT CO INC..............................................................6 PERKINS ENGINES COMPANY LIMITED ..............................................29 POWERSCREEN MW DEALER GROUP ................................................32 PURPLE WAVE INC ................................................................................89 RACKERS EQUIPMENT CO ....................................................................38 ROAD BUILDERS MACHINERY ..............................................................13 ROLAND MACHINERY INC........................................................................5 SANY AMERICA INC ................................................................................83 SCHAEFER ENTERPRISES ....................................................................55 SMH GROUP-US ......................................................................................22 SMITHCO..................................................................................................64 STAR EQUIPMENT LTD ............................................................................6 SUMMIT SUPPLY LLC..............................................................................29 TEREX FUCHS ........................................................................................47 VICTOR L PHILLIPS - AN EQUIPMENTSHARE COMPANY ..................25 THUNDER CREEK ..................................................................................58 TOWMASTER INC. ..................................................................................65 TRI-STATE TRAILER SALES ..................................................................63 UNITED EDGE REAL ESTATE ................................................................92 WALLWORK TRUCK CENTER ................................................................58 YODER & FREY AUCTIONEERS ............................................................93
OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES ........................................................................................5 COLUMBUS EQUIPMENT CO ................................................................................8 EQUIPMENT CORP OF AMERICA ........................................................................5 GORILLA HAMMERS ..............................................................................................1 JCB OF OHIO ..........................................................................................................7 THE MCLEAN CO....................................................................................................3
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • December 12, 2020 • Page 95
CLIMBING INTO YOUR 4X4 TRUCK AT THE END OF YOUR SHIFT IS SUDDENLY A LET DOWN.
MAKE EASY WORK OUT OF CHALLENGING CONDITIONS WITH THE ALL-NEW 460E-II AND 410E-II. With new features that help eliminate guesswork and optimize comfort, operators can focus on getting more done. Like three new drive modes AND SIMPLI ED TRANSMISSION RETARDER CONTROLS THAT CAN BE MATCHED TO JOB SITE CONDITIONS OR YOUR OPERATORlS DRIVING STYLE 1LUS IMPROVED FUEL BURN FOR THE & ** MEANS LESS REFUELING .EANWHILE THE UPDATED HOSE ROUTINGS AND NEW SENSORS ARE DESIGNED TO HELP IMPROVE UPTIME AND THE QUIET PRESSURIZED CAB WITH NEW PRIMARY DISPLAY OPTIONAL PREMIUM HEATED VENTILATED SEAT AND AUTO TEMPERATURE CONTROL MAKES EASY WORK OUT OF LONG SHIFTS 'REE YOUR MIND 3UN :OUR 8ORLD
JohnDeere.com/ADT
'UEL CONSUMPTION IMPROVEMENTS BASED ON COMPARISON OF & TO &**
mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054
www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484
www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600
www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060
www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700
www.westsidetractorsales.com Lisle, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677
Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160
Page 96 • December 12, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE