Midwest 15, July 24, 2021 by Construction Equipment Guide

Published Nationally

$3.00

Midwest Edition

July 24 2021 Vol. XXVII • No. 15

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

The Third Avenue bridge sits directly in between St. Anthony Falls to the right of this photo and the Horseshoe Falls on the other side of the bridge.

Helm Civil Uses iMC to Complete Grinding Project...12

Bommarito Builds Success; Expands Services for Clients...48

Bauer Built, Fendt Keep Valley Corp. Running Smoothly...61

Table of Contents.............4 Aggregate and Recycling Section......................29-39 Attachment Section ...................................48-53 Trucks & Trailer Section ...................................61-69 Business Calendar..........72 Auction Section ........74-81 Advertisers Index...........82

By Dick Rohland CEG CORRESPONDENT

It has been a workhorse of a bridge standing the test of time over the last five generations as motor vehicle traffic continued to evolve and drastically increase in numbers. Without doubt, this is due to the engineers who designed it and the contractor who built it at a time when, just a few years earlier, the horse and carriage could still be seen on city streets. The historic Third Avenue bridge located in the heart of the city of Minneapolis is undergoing a major rehabilitation to make some much-needed repairs and add another 50 years to its life span.

Completed in 1918 after four years of construction, it is located just upstream from the historic St. Anthony Falls District of the city. This bridge carries HWY 65, known locally as Third Avenue, from downtown Minneapolis over the Mississippi River to the city’s Northeast neighborhood. The bridge is historically significant because it is a landmark structure that is part of the St. Anthony Falls Historic District, which was the center of the city’s early flour milling days. It reflects the creative engineering of Josef Melan, an Austrian civil engineer known as one of the pioneers of reinforced concrete bridge engisee BRIDGE page 60

Elevating Hard Hats Protective Safety Helmets Deserve Respect, Care By Lucy Perry CEG CORRESPONDENT

Two major construction feats, the Hoover Dam and the Golden Gate Bridge, marked the first times an employer mandated the use of hard hats on the job. The iconic head protection has come a long way since, and in 2017 a contractor first required helmets over hard hats because of the high rate of brain injuries and falls in the construction industry. Worn to prevent head injury from

falling objects, debris or weatherrelated elements, hard hats are often taken for granted. It’s not uncommon for workers to bump into fixed objects on a site or to encounter electrical hazards, said Houston safety consulting company Safety by Design Inc. Hard hats prevent injury. But not all OSHA-approved hard hats or safety helmets are the same, and none of them lasts forever. see HATS page 70

Page 2 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2012 Cat D6TXW / $119,000

2008 Cat D6T / $99,000

2016 Cat 982M / $485,000

SN: SLJ00236 Hours: 9,086

SN: KJL00660 Hours: 9,650

SN: XDL00567 Hours: 2,473

2018 Cat 336F / $235,000

2013 Cat 349EL4 / $70,000

2017 Wacker Neuson SW28 / $31,000

SN: RKB21039 Hours: 2,981

SN: TFG00813 Hours: 15,096

SN: 00678 Hours: 810

2014 John Deere 333E / $34,095

2016 Cat 287D / $40,000

2018 Bobcat T650 / $50,000

SN: 263091 Hours: 1,496

SN: HMT00828 Hours: 2,235

SN: ALJG25501 Hours: 1,103

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 3

81 15-94 15 94 41-19 41 19 900 2018 Kobelco Midi SK85CS-3E CS-3E .. $71,500 0

2014 JLG 45 50AJ Aerial Lift .... $44,500

2016 JLG 800S Aerial Lift .......... $82,500

2014 660SJ Aerial al Lift ............... $55,000

A/C, 55HP Tier 4f diesel, integra ated noise dust reduction system (INDR), 17.5” rubber ubber tracks, 7’ stick, 14’ 8” dig depth, W-B W-B hydraulic coupler, 8’ pushblade, e, swing boom, 1 & 2 way aux. hydraulics, draulics, pattern control, additional counterweight, work w lights 18,700 lbss. 4 Warranty W arranty 3,000 hr., 2,101 hrs. ................ #KOB374

Articulated Boom m Lift, Deutz D2.9L4 Tier 4 49HP diesel, 45’ platform heig ght, 4WD, 2 wheel steer, Sky Power, 6’ basket, 6’ jib, 33/1550x16.5 tires, 45% gradability, 14,200 lbs., 830 0 hrs. .................................... #ST127

Deutz TD2.9L 65HP Tier 4F diesel, 80’ platform m height, 4WD, ZKHHO VWHHU 6N\SRZHU ¶ EDVNHW [ IRDP ¿OOHG WLUHV cold weather start, inward self-closing gate, 45% 5% gradability, ...... #ST210 33,450 lbs., 1,128 hrs. ...................................

Deutz TD2.9L Final Tier 4 diesel, 67HP diesel, 66’ platform height, 4WD, 2 wheel steer, Sky Power, 8’ basket, 6’ jib, 39x15-22.6 tires, es, cold weather start, inward self-closing gate, 45% grad-ability rad-ability, 26,700 lbs., 1,132 hrs. ................................................................ .................................. #ST129U

2012 Cat M322D Wheeled d ....... $134,500

2017 IHI Mini ni IC35 Track Truck . $37,500

2012 Vo olvo SD75 Smooth Drum m .. $49,500

2014 Kenworth T800 Tri Axle .. $115,500

A/C, wheeled, Cat 6.6 173HP die esel, standard boom, 9’ 6” stick, 20’ 7” dig depth, 11.00-20EM tires, auxiliary hydraulics, 4 outriggers, anti drift valves, adjust. hydraulic sensitivity, roading pkg., C Cat variable pin grab hyd. coupler 78” ditching bucket, pattern changer, window guard, 47,400 lbs.., 3,921 hrs. ............... #11241

Kubota V2403M-D1 -D1 46HP diesel,, 2 speed hydrostat transmission, 6,614 614 lbs. capacity (1.8 cubic yds.), 12’ 6” tracks, 8.7 PSI loaded, oaded, 5,016 lbs., 626 hrs. ..... #N4739

66” vibratoryy smooth drum compactor p , ccab with A/C,, Vo olvo D3.8 Tier 4 99HP diesel, dual amplitude, plitude, 30,500 lbs. maximum high amplitude, 1850-2025 25 VPM, Volvo o Traction System, 14.9-24 tires, 16,550 lbs., bs., 527 hrs. ....................................................................... .......... #11068

A/C,, 455HP T4i,, Eaton Fuller 8LL trans.,, 88,500 GVW, 22,500 intermediate airr lift, double frame, dual steering ER[ VHW EDFN IURQW D[OH KHDWHG PLUURUV HQJLQH EUDNH GLႇ lock, power windows, power locks, block heater, cruise cntrl, aluminum buds, 16’ 6’ Ox Box dump box, 21 yrd cap., electric tarp. , 111,833 mi., ................................... #11293

2018 New Holland C238 Traccks ......... $49,500

2018 New Ho olland C227 Tracks . $38,500 A/C, heat, radio, 74HP T4F diesel, E-H hand controls , 2 speed, 2,700 lb. b. operating cap., lap bar, 12.6” rubber tracks, aux. hydraulics, raulics, hydraulic mount plate, block heater, work lights, s, keyless start, 72” bucket, 8,270 lbs. Extended Warran a nty 2,000 hrs. or 11/26/20, Emissions Wa arranty 3,000 hrs. or 11/26/23., 973 hrs. ...... #N5425

2018 Manitou MTA A12042 12 2,000 lb. Te elehandler Forklift .............. ... $87,500

2015 We estern Star ar 4700 Ta andem ..$82,500

A/C, radio, 84HP, Hand controls, 2 speed, s 3,800 lb. cap., heavy duty hydr. mount plate, ride control, c self-level, work lights, multi-function electrical, batte ery disconnect, 10,100 lbs. Extended Wa arranty 3/19/20. Em mission Warranty a 3/19/23., 1,122 hrs. ......................................... #N5394

Canopy, Cummins QSF3.8L 120HP T4 4f diesel, 4WD, 12,000 lbs., 42’ 4” reach, front stabilizers, zers, 72” x 48” carriage, 14:00-24 tires, 3 mode steering, ering, auxiliary hydraulics, road lights, work lights, 25,500 lbs., 405 hrs. ...................................................... ......... #11605

470HP, 18 spd, 66,000 GVW, 20,000 lbs. front, 46,000 lbs. rear, set forward axle, le, 208” WB, air ride suspen., 4.30 rear, 15’6” Brandon box,, dual swing gate, electric tarp, engine brake, rear air lines, s, air ride cab/seat, power wndws, cruise cntrl , 153,049 mi.i. ........................................ #10805

sales@iltruck co sales@iltruck.co om • rental@iltruck k com • 320 Briscoe Drive, k.com Drive Morris Illino ois 60450

www.iltruck.com .iltruck com

Page 4 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE 8

MDOT REBUILDS SECTION OF I-75 FOLLOWING TANKER FIRE

Only days after a tanker truck crashed on Michigan’s northbound I-75 destroying hundreds of feet of newer pavement and barrier wall, crews were on the job ready to rebuild.

HELM CIVIL USES IMC TO COMPLETE GRINDING PROJECT

HBS’S TELEMATICS INTEGRATION WITH KUBOTA BOLSTERS SUPPORT

No two job sites are alike, but they usually have one thing in common: they are above water. That wasn’t the case for Helm Civil when it tackled a lock and dam rebuild for the USACE on the Mississippi River in Rock Island, Ill.

HBS Systems, a provider of web-based equipment dealership management solutions and rental software, announced an advanced telematics integration with Kubota.

Hundreds of Doosan Bobcat employees volunteered cumulatively more than 1,500 hours, utilizing Bobcat equipment and their talents to different projects and organizations to complete “Doosan Days of Community Service.”

Joe Bommarito always knew he wanted to be his own boss. Starting a business focused on utilities made sense, considering he grew up helping his dad out with his utility company.

JCB North America announced the creation of a diesel mechanic apprenticeship program that comes with a $2,000 signing bonus for eligible new hires. JCB is looking for talented and ambitious team members.

InSite Software’s Elevation earthwork take-off and GPS modeling software is now part of the Southern Utah University (SUU) curriculum; its adoption is expected to better prepare students for the modern construction site.

On July 7, Gov. Laura Kelly announced that six expansion and modernization highway projects in south central Kansas totaling more than $129 million have been committed to construction.

Created by Blockworks, in collaboration with John Deere, the Minecraft experience gives players an introduction to modern agriculture through the virtual use of machines, processes and decisions that go into farming today.

The U.S. Department of Transportation plans to award $905 million to 24 projects in 18 states via the Infrastructure for Rebuilding America or INFRA discretionary grant program.

Valley Corp., a third-generation general contracting company in Valley, Neb., was awarded the contract to build a new 8-mi. U.S. 30 from Rogers to Fremont, Neb. The NDOT project aims to move the existing highway north of the city.

Josh Miller is the proprietor of Backwoods Grading, Landscape and Excavation, a family-owned business headquartered in Fairview, N.C., just outside of Asheville in the Blue Ridge Mountains.

Caterpillar received gold for its Cat Command for Construction system during this year’s Edison Awards program. It was recognized as being the best of the best for the Smart Productivity Tools – Living & Working Environment category.

DOOSAN BOBCAT EMPLOYEES GIVE BACK TO COMMUNITY

JCB ANNOUNCES DIESEL MECHANIC APPRENTICESHIP PROGRAM

GOV. KELLY OKS $129M KANSAS HIGHWAY IMPROVEMENT PROJECTS

USDOT AWARDS NEARLY $1B IN INFRA GRANTS ACROSS 18 STATES

BACKWOODS GRADING INCREASES PRODUCTIVITY WITH BOMAG

Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

BOMMARITO BUILDS SUCCESS BY EXPANDING SERVICES FOR CLIENTS

INSITE SOFTWARE PREPARES STUDENTS FOR REAL-LIFE CONSTRUCTION SITES

JOHN DEERE BRINGS FARM LIFE HOME WITH NEW MINECRAFT VIDEO GAME

BAUER BUILT, FENDT KEEP VALLEY CORP. RUNNING SMOOTHLY

CATERPILLAR TAKES GOLD AT 2021 EDISON AWARDS

AGGREGATE PRODUCTION & RECYCLING SECTION

29 32 32 36

MB CRUSHER TRANSFORMS ALL SITES INTO RECYCLING CENTERS

CELEBRATING FIRST ANNIVERSARY AS METSO OUTOTEC QUARRY ACADEMY ANNOUNCES 2020 SCHOLARSHIP WINNER

TEREX ACQUIRES MDS INTERNATIONAL OF MONAGHAN, IRELAND

DEPARTMENTS

72 76

BUSINESS CALENDAR COMING AUCTIONS

18 44 50 53 68 74 74

CASE OEM-Fit for Excavators ASV HOLDINGS OEM Maintenance Kits TERAN NextGen 36-Ton Excavator Bucket ROCKLAND Krypto Klaw Grapple Rake FELLING New Fender Design for EZ-Tilt Trailers TRIMBLE GuidEx Guidance System KUBOTA D902-K Electronically Controlled Diesel Engine

EQUIPMENT

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

MIDWEST EDITION

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 5

V I S I T

Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers

2015 KOMATSU D155AX-8

$299,500

2013 KOMATSU D61EX-23

2018 TIMBERPRO TN725D

$400,000

2015 WIRTGEN W220

2011 WIRTGEN W220

$249,500

2017 KOMATSU WA270-8

$144,500

2012 HAMM HD120VO

2017 KOMATSU D65PX-18

$219,500

2016 KOMATSU WA500-7

STK# KM15298, 4324 HRS, FRANKSVILLE, WI

STK# TP20001, 2,232 HRS, EAU CLAIRE, WI

STK# WG19030, 5,532 HRS, SPRINGFIELD, IL

2004 KOMATSU HM300-1 WATER TRUCK STK# KM17369, 10,771 HRS, $149,500 CAPE GIRARDEAU, MO

$144,500

STK# KM18532, 3,168 HRS, DEFOREST, WI

$CALL

STK# WG19010, 3,964 HRS, SPRINGFIELD, IL

STK# KM18362, 1119 HRS, BOLINGBROOK, IL

STK# KM19457, 3,735 HRS, EAST PEORIA, IL

2015 KOMATSU 931.1

$275,000

2017 KOMATSU 845

2018 KOMATSU WA320-8

$159,500

2014 KOMATSU PC360LC-10 $199,500

STK# VT19025, 7,957 HRS, ESCANABA, MI

STK# KM19637, 1,437 HRS, DEPERE, WI

$39,500

STK# HM20017, 3,570 HRS, SPRINGFIELD, IL

$229,500

STK# KM19654, 8,339 HRS, EAST PEORIA, IL

STK# KM19566, 2,744 HRS, SPRINGFIELD, IL

2016 KOMATSU PC45MR-5

$64,500

STK# KM21046, 800 HOURS, DEPERE, WI

2018 KOMATSU PC210LC-11 $179,500 STK# KM20049, 1209 HRS, EAU CLAIRE, WI

17 Roland Branch Locations in IL, IN, MI, MO, and WI

Used Sales (217) 789-7711

$339,500

STK# VT20014, 2,222 HRS, EAU CLAIRE, WI

R O L A N D M A C H I N E R Y . C O M

Page 6 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 2017 Case 580SN s/n NHC742675, 2955 Hours, Deluxe Cab with AC,4WD, Comfort Steer, 2-Lever Controls w/Power Lift, Air Seat, Ride Control, 82” QA 4-n-1 Bucket. Extendahoe w single direction Aux and Hyd coupler. 12”, 18”, & 24” buckets ....$69,000

Crestwood 708-597-3110 2019 Case 580SN, s/n NKC762097, 650 hours, Cab, 2 Door w/ Heat and AC, Pilot Controls w/Power Lift, 4wd, 82” loader Bkt, Powershift S-Type Trans ..................$79,900

2016 Takeuchi TB230, s/n 130001742, 325 2015 Leeboy 8510C s/n 122257, 2750 Hours, ROPS, Tag Coupler, Blade, Aux Hyds, Hours, Paving Width 8'-15', Heated screed, Rubber Tracks ..................................$29,900 Legend Screed System ....................$52,500

McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800 Schereville* 219-865-6545 2018 Takeuchi TB235, s/n 123600647, 556 Hours, Cab w/AC, Tag Coupler, Blade, Aux Hyds, Rubber Tracks........................$41,800

2016 Case 221F, s/n NGHP00337, 1285 Hours, Cab w/heat, Hyd SSL coupler, 1.13yd Bucket, Pfreundt Scale ....................$50,400

2018 Carlson CP130 s/n 109DB8P, 520 2016 Case CX31, s/n NGTN61260, 450 Hours, Cab w/AC, Rubber Tracks, Long Arm, Hours, Contractor deluxe package $179,900 Tag Coupler, Blade............................$35,990

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Michigan Marne* 616-371-7250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 7

ROADTEC RX900 - ‘18, approx. 1050 hours, ROADTEC RP190 - ‘13, approx.. 6200 hrs. 12’6” drum, 24V night light package, ACE EZIV Carlson screed, Moba grade & slope conG&S, ext warranty ..............................$710,500 trols ......................................................$58,900

SAKAI SW770HF - ‘17 w/approx. 1550 hours, 67” drum, tier III Isuzu engine, fleet machine .. ..........................................................$69,450

PAVERS / ROAD WIDENERS Bomag CR662RM - ‘15 w/590 hrs, tracked MTV w/conveyor, #C000763 ......................$435,900 Roadtec RP190 – ’13, 5860 hrs, Carlson EZIV 10-19’ screed w/12” ext, #C001909 ....$55,000 P.O.R. items may be on rent causing pricing and hours to vary.

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

EXCAVATORS Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R.

CRUSHING AND SCREENING

ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, BROOMS 4’x9’ Top & Bottom Screens, #C001154 ............ Superior DT74J - ’20, approx.. 600 hrs. AC, side shift, #C002327 ............................$63,700 ..........................................................$161,700 Pioneer FT4250CC – ’17, approx.. 2700 hrs, 18’ feeder, dust sp, 4 bar....................$486,000 MILLING MACHINES BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Pioneer FT4250CC - ’15, approx. 2400 hrs., 18’ Out Conveyor......................................$174,000 feeder, dust sup, 3 bar........................$475,000 BOMAG BM1200/35 - ‘15, 1150 Hrs, 4’ Drum, ROLLERS 3’ Also Available, Front Conveyor, #C000846 .... ..........................................................$298,000 Sakai GW750-2 - ‘14, 1060 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$80,000 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900 Roadtec RX-700 - ‘12 w/5000 Hrs., 7’2” drum, *Comes with any remaining standard and grade & slope controls, #C001978 ....$197,200 3 year extended power train warranty.

Contact Chuck or Jason in Illinois

1-800-307-0221

crhodes@finkbiner.com jzeibert@finkbiner.com

www.finkbiner.com

1997 GROVE RT855B – (’97), 4WD, 12,170 hrs, C004510...$69,000

1999 GROVE RT860B – (’99), 4WD, 9,120 hrs, C004493...$69,000

2019 GROVE GRT655L – (’19), 486 hrs, C003873…$CALL

MANITOWOC 10000A-1 – (’13), 100 Ton, 3,890 hrs, C000660...$619,000

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT ASTEC GT205S, (’17), Triple Deck Crawler Mounted Screen Plant. #C003398............................................$CALL JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI FT4250CC, (‘11) Track Mounted Impact Crusher, #C003741 ................................................................$CALL KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL

CRANES GROVE RT650E, (’14) 50-Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$319,000 GROVE RT765E-2, (’14), 65-Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$339,000 GROVE TMS900E, (’05), 90-Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ..........................................$CALL

LOADERS AND EXCAVATORS: LIEBHERR L556 2PLUS2, (‘11) Enclosed ROPS w/AC, 4WD, 188hp Liebherr D934S A6 four cyl. diesel, rear camera, 4.58 cu. yd. bucket with bolt-on cutting edge, “2 plus 2” wheel loader, #15360 ....................$114,438 LIEBHERR LH60C LITRONIC, (‘17) 4,707 Hours, Equipped w/ Liebherr ERC System, A/C, 1114,600-136,700 lb. operating weight, 190kW/258hp engine output, Emission stage Tier 4, #C003171....................................$CALL LIEBHERR LR636, (‘18) 3.25cyd bucket w/teeth & segments. Front and rear aux. hydraulics for 4 in 1 bucket, winch or ripper. 3 year/6000 hour full machine warranty, #C001745 ....................................................$249,700 LIEBHERR A924 LITRONIC, (‘18) 58 Hours, Air conditioning, 4 outriggers, #C003505 ............................$CALL LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R920 COMPACT LITRONIC, (‘18), w/Werk-brau pin grabber coupler, medium & high pressure aux. hydraullic circuits, pattern changer, #C003330 ..........................................................................................$CALL LIEBHERR A924 LITRONIC, (’15), Liebherr diesel engine, auto lube, rear camera, NewWerk Brau pin grabber coupler, front & rear outriggers, 10’ Stick, 54” GP bucket w/teeth, #C004145......................................$159,000

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Matthew Pehler at:

mpehler@amstate.com or mobile 1-414-719-8700 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MDOT Rebuilds Section of I-75 Following Tanker Fire Michigan Department of Transportation photo

Michigan Department of Transportation photo

While crews are rebuilding the damaged sections, MDOT’s damage claim coordinator is working to assess the damage and the cost of the response and repairs.

By Lori Tobias CEG CORRESPONDENT

Only days after a tanker truck crashed on Michigan’s northbound I-75 destroying hundreds of feet of newer pavement and barrier wall, crews were on the job ready to rebuild. It’s the bright note in a frightening accident that closed the north and south bound lanes at Big Beaver Road in Troy for days. On July 12, at about 1:15 p.m., the driver of the tanker carrying 14,000 gal. of fuel drifted into the left lane, then hit the barrier wall before erupting into flames that burned for hours. The driver was rescued from the truck cab and hospitalized. There were no other injuries. The freeway was closed

while emergency and environmental clean-up teams responded to the accident. Lanes in each direction were opened the following day. “The fact that there are no fatalities shocks me,” said Rob Morosi, spokesman of the Michigan Department of Transportation (MDOT). “Pre-pandemic, in 2019, we had about 170,000 vehicles using that freeway in a 24-hour period. With the pandemic, those traffic volumes decreased. With things starting to pick back up and more people returning to offices, it’s still around 100,000.” The section of freeway is part of the I-75 Modernization plan and had been rebuilt in 2019-2020. The contractor, Walsh/Toebe Joint Venture, has been working on the

final tasks. The accident damaged 150 ft. of pavement in both directions and 300 ft. of barrier wall. The damage from the heat of the fire compromised the stability of the pavement, necessitating the rebuild, Morosi said. The cost of the rebuild project is estimated at $1.5 million and is expected to take about six weeks to complete. “We’re rebuilding,” said Morosi. “We currently set up a construction zone to replace the sections that were damaged. We’ll rebuild the barrier wall, and we’re working on the left center lane right now. When that is complete, we’ll shift traffic over and rebuild the right lane and right shoulder. The interesting thing is, since the Michigan Department of Transportation photo

Only days after a tanker truck crashed on Michigan’s northbound I-75 destroying hundreds of feet of newer pavement and barrier wall, crews were on the job ready to rebuild.

The accident took place on Segment 2 between mile 13 and Coolidge Highway of the $1.6 billion I-75 Modernization project in southeast Michigan.

contractor is still doing the punch list, he still has presence. There is a lot of traffic control still out there and equipment still out there.” Crews used a pavement breaker to demolish the burnt section of the freeway lane, then applied a high friction treatment so that traffic would not skid on oil or the slick pavement, which is on a curved section of the road. While crews are rebuilding the damaged sections, MDOT’s damage claim coordinator is working to assess the damage and the cost of the response and repairs. “This is not just for MDOT, but for local partners at the city whose fire department responded; the Oakland County hazard materials unit responded; the state agency, Environment, Great Lakes and Energy [EGLE] responded. There were private tow truck companies, and private companies that specialize in environmental cleanup. All

those costs are compiled and submitted to the trucking company’s insurance company.” The accident took place on Segment 2 between mile 13 and Coolidge Highway of the $1.6 billion I-75 Modernization project in southeast Michigan. The project saw the replacement of all the bridges carrying I-75 northbound over local roads. It was the largest project in size and scope MDOT had tackled, including the replacement of 18 overpasses and bridges, as well as two cloverleaf interchanges replaced with diverging diamond interchanges. I-75 is the most heavily used commuter route in Oakland County, which is part of the Detroit Metropolitan area. It sees 174,000 vehicles daily and is a gateway to tourist destinations in the north, and the largest north-south freeway in Michigan.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 9

NORTH DAKOTA TA Williston 701.577.1249 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 Local Dealer NORTH CAROLINA L Local l dealer d l address dd Asheville 000.000.0000 828.687.0620 www.localdealerweb.xx Charlotte 704.596.8283 Local Dealer Greenville Local dealer address 252.754.5280 000.000.0000 Raleigh www.localdealerweb.xx 919.661.8710 Local Dealer SOUTH CAROLINA Local dealer address Piedmont 000.000.0000 864.704.1060 www.localdealerweb.xx Columbia 803.791.0740 Local Dealer Charleston Local dealer address 843.414.1120 000.000.0000 GEORGIA www.localdealerweb.xx Buford 678.318.9500 Local Dealer Local dealer address Savannah 912.964.8079 000.000.0000 www.localdealerweb.xx Macon 478.200.3300 Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx

DEALER LOGO Local Dealer Local dealer address 000.000.0000 www.localdealerweb.xx ascendummac ascendummachinery.c y.com . om .c Authoriz ed dealer for Volv Vhiner olvo Construction Equipment q p

UPP HIGH ORR ON T GROUND, THE W HAVE WE VE YOU COVEERED. ERED Volvo high-reach excavators meet the tough demands of demolittion with unprec unprecedented ed po powe er,, prot protection and reach. And w with factory-fitted y fitted guarding and oth her demolition-ready features, our complete crawler lineup can c easily tackle cleanup safely and a efficiently. High or low, all Volvo excavators come with a Lifetime Frame F and Structu ure Warranty, so you can confidently handle whatever tomorrow throws your way.

"¡ Ú "¡ Ú #Ú # Ċ¡ Ċ¡æÁ ¡ ¡# É#9 /æ /æ ¡ ¡# Úe¡ e¡ Ú¡ Ú¡ 9 Á Á ¡Á9 Á9 Ú¡ Ú¡/ / Ċł

Page 10 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Bobcat® L23 small articulated loader is small enough to fit in small lots, backyards and other tight jobsites.

New Bobcat T76 Track Machine with Diamond 60” Tree Cutting Head

New 15-ton E145, Bobcat’s Largest Excavator in Stock with full line of all Bobcat Excavators on site and ready to rent or own.

New Bobcat Commercial & Residential Mowers in Stock!

Largest Selection in the Midwest!

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

New In Stock Bobcat MT100’s

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Farm-Rite Dassel Farm-Rite Willmar Farm-Rite St. Cloud Farm-Rite Long Prairie

Authorized Bobcat Dealer U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281 19612 US-71 • Long Prairie, MN 56347 866/514-0982

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 11

JD 310SL, Air, 4x4, Ext JD 450J, 16” Pads, 115” Hoe, Aux, #113908 ............ Blade, #119718 ....$79,500 ..............................$76,500

JD 300D, Bed Liner, JD 210GLC, Hyd Thumb, Heater, #104338 ................ Warranty, #113398 ............ ............................$198,000 ............................$149,500

JD 744K, Ride, Coupler, 3 JD 772G, Tall Cab, Air, 14’ JD 700K, 120” PAT, Winch, #120383 ................ Spool Aux, #121082 .......... Blade, #93273 ....$109,000 ............................$145,000 ............................$198,000

JD 672G, Cab, Air, 14’ Harlo HP8500, 4x4, 8,500lb, #120387 ..$45,500 Blade, #115524 ..$139,000

JD 350GLC, 13’ 1” Arm, Warr til 6/2022, #122604 .. .......................... $199,000

JD 85G, 6’ 11” Arm, Warranty til 8/2021, #121767 ................$68,500

JD 670GLC, 13’ 9” Arm, JD 850K, LGP, 36” Pads, Warr til 11/2021, #120064 Warranty, #120043 ............ ............................$179,500 ............................$498,500

JD 844K, Ride, 7.25yd Bucket, #108191................ ............................$229,000

NPK Hammers, All Sizes for All Makes. Inspected JD 650K, LGP, 128” Blade, JD 624K, QC, 3 Spool Aux, JD 850K, 128” Semi U #119762 ..............$119,000 #107983..............$119,500 Blade, Warranty til 5/2023, and Well Maintained, GH4 #122980 ..............$206,000 –GH18

JD 544K, Coupler, Aux Hyd, #118872 ......$99,500

Liddell Trailers All Sizes

Page 12 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Helm Civil Uses iMC to Complete Grinding Project

A Komatsu intelligent Machine Control (iMC) PC490LCi-11 excavator with integrated GPS technology and an Antraquiq AQ-4XL grinder would allow Helm Civil to use a 3D model to control its depth and maintain accuracy while grinding, even as the river levels fluctuated.

No two job sites are alike, but they usually have one thing in common: they are above water. That wasn’t the case for Helm Civil when it tackled a lock and dam rebuild for the Army Corps of Engineers on the Mississippi River in Rock Island, Ill. Lock and Dam 15 was built in 1931 on wood cribbing and wood piling. Over the years, consistent barge traffic caused the old foundation to fail on the lower guide wall that the barges use to come in and out of lock chamber. Helm Civil, an East-Moline, Ill.-based firm, won a best-value contract with the Army Corps of Engineers, Rock Island District, to remove twelve 30-ft. monoliths and install 63 drilled shafts. “The section we had to grind was 360 feet long and 5 feet tall,” said Clint Zimmerman, Helm Civil senior project manager. “All of it was about 7 to 8 feet under water, which obviously posed a unique challenge.” To complete the job, Zimmerman had to get the proper equipment. First, he needed a grinder that would work underwater. Second, he required technology that allowed the operator to accurately maintain grade when grinding under water. He turned to Road Machinery & Supplies Co. for help. The result was to use a Komatsu intelligent Machine Control (iMC) PC490LCi-11 excavator with integrated GPS technology and an Antraquiq AQ-4XL grinder. This would allow Helm Civil to use a 3D model to control its depth and maintain accuracy while grinding, even as the river levels fluctuated. “Derek Welge and Bryan Stolee really did a good job of bringing this together, and Chris Potter was instrumental as well,” said

Required equipment included a grinder that would work under water and technology that allowed the operator to accurately maintain grade when grinding under water.

“The section we had to grind was 360 feet long and 5 feet tall,” said Clint Zimmerman, Helm Civil senior project manager. “All of it was about 7 to 8 feet under water, which obviously posed a unique challenge.”

Zimmerman. With a model in hand, and the excavator securely positioned on a barge on the river, Helm Civil was ready to get to work. As the machine was grinding underwater, the operator was able to look at the screen inside the excavator’s cab and know exactly where he was at and how far he needed to go. “The depth of grinding changed with the water level of the river,” said Zimmerman. “The advantage of the technology was that we had a consistent picture of where we needed to grind, regardless of the water level. The operator always had an exact location to operate from. It was very impressive.” Helm Civil had used 3D modeling before, but not in this capacity. “We had never used 3D modeling under-

water,” said Zimmerman. “We would have been operating blind, but the iMC technology allowed us to know exactly where we were at all times. “I really don’t know how we would have gotten this done with conventional equipment.” The use of Komatsu intelligent Machine Control allowed Helm Civil to complete the project in nearly half the time it expected. “The grinding was scheduled for two weeks,” recalled Zimmerman. “We brought the PC490 in on a Thursday, then we attached the grinder on Friday and shot control points around the job site. We started grinding that Monday, and on Tuesday alone we did 60 feet, which was very impressive. We were basically done that Friday. This was the only way to go.”  CEG

Helm Civil, an East-Moline, Ill.-based firm, won a best-value contract with the Army Corps of Engineers, Rock Island District, to remove twelve 30-ft. monoliths and install 63 drilled shafts.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 13

#92948 | 2017 BOMAG BW138AC-5, 1200 HOURS ....................................................$39,500

#93032 | 2007 KOMATSU CK30, CAB/AC | 2525 HOURS ....................................................$27,500

#93013 | 2013 TAKEUCHI TL12, CAB/AC | 2805 HOURS ..................................................$36,500

#3499 | 2007 BOMAG BW213PDH-40, 3400 HOURS ......................................................$3499

#C003JM | CAT 963C, CAB/AC | GP BUCKET | 7100 HOURS ..........................................$89,500

#92729 | 2012 KOMATSU WA380-7, JRB QC. 4000 HOURS ........................................$127,000

#93018 |2012 KOMATSU WA250PZ-6, GRAPPLE BUCKET | 12,350 HOURS ......................$59,500

#93068 | 2015 TAKEUCHI TL10, CAB/AC | BUCKET | 2650 HOURS ........................................$37,500

#92930 | 2011 KOMATSU D51PX-22, 6 WAY BLADE | 3200 HOURS ..........................$127,500

#92145 | 2006 KOMATSU PC300LC-7E0, JRB QC, #92926 |2013 KOMATSU PC490LC-10, 8750 6900 HOURS ..........................................$69,500 HOURS | AUX HYD | QC ......................$109,000

#93009 | 2015 KOMATSU PC240LC-10, 7,750 HOURS, QC ............................................$79,500

#92180 |2012 KOMATSU D65EX-17, RIPPER, SIGMA BLADE, 4700 HOURS ..............$149,500

#92983 | 2013 KOMATSU D65WX-16, CAB/AC | RIPPER | SIGMA | 6700 HOURS ............$94,500

#92906 | 2012 KOMATSU D65WX-17, CAB/AC | RIPPER | SIGMA | 7100 HOURS ............$99,500

#93039 | 2017 KOMATSU D61PX-24, CAB/AC | 6 WAY BLADE | 5400 HOURS ..................$149,500

Page 14 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call fo or our full line of tough ough used equipment! ment! )YHK 2LU[ ࠮ <ZLK ,X\PWTLU[ /V[SPUL ࠮ )6)*( (; ;:

Check outt additional used eq quipment at bobcatent.com tent.com P RE-OW N ED, E JOB R EADY EQUIPMENT QUIPMENT NOW A V A AILAB LE !

2018 Bobcat S630 Skid Steer Loader, 275 Hours, A71 Package, 2019 Bobcat S650 Skid Steer Loader, 1525 Hours, A71 Package, 2 Speed, Joystick Controls, CN 123508 ..................................$37,500 New Tires, CN 112426 ................................................................$33,000

2016 Bobcat S650 Skid Steer Loader, 1225 Hours, A91 Package, CN 97785 ..........................................................................................$34,000

2018 Bobcat S650 Skid Steer Loader, 1100 Hours, A71 Package, High Flow Hydraulics, CN 108770..............................................$36,500

2019 Bobcat E35 Excavator, 425 Hours, A40 Package, Long Arm, CN 113022 ..................................................................................$49,900

2014 HRV2000 Compactor, Fits 24-65 Metric. Ton Excavators, 24-42 GPSM, CN 90536 ..........................................................................$9,150

2014 DX350 LC-3 Doosan Excavator, 1450 Hrs, Includes Quick Coupler & Bucket, CN 86222 ..................................................$110,000

2013 4:1 Doosan Bucket, 100.5”, 2.5 Cubic Yards, CN 89289 $15,250

C i n c i nna n ti • Mt. Mt Orab • H illiard • R eyn oldsbu bu rg • Zan esville • L ex ing t o n • Lo uiss v ille

Doosan Bobcat Employees Give Back to Community Hundreds of Doosan Bobcat employees facilities, therapeutic riding stables and across several North America locations shelters. recently volunteered cumulatively more than National projects and participation were 1,500 hours, utilizing Bobcat equipment and organized by Doosan Bobcat facility locatheir talents to different projects and organitions in and around Bismarck, Gwinner, zations to complete “Doosan Days of Fargo and Wahpeton, N.D.; Litchfield, Community Service.” Minn.; Suwanee, Ga.; Johnson Creek, Wis.; This companywide volunteer effort celeStatesville, N.C.; and Denver, Colo. In some brates ongoing partnerships within commuprojects, Bobcat skid steer loaders, compact nities where Doosan Bobcat employees, track loaders and other machines were used dealers and customers live and work. The in the efforts, outfitted with everything from volunteer efforts took place over two weeks, buckets to augers and other dirt-moving and kicking off on June 7 and wrapping up on Over the course of the service days held this year, more than 260 Doosan Bobcat land-shaping attachments. June 18. Doosan Bobcat employs approximately employees in North America volunteered in the community efforts, supporting “Being a good corporate citizen is an nearly 30 nonprofit organizations. 4,500 people at 13 facilities in seven states ongoing responsibility and something we and the manufacturer said it has long take great pride in at Doosan Bobcat,” said Nicol believed it is important for the company and its Winkelman, vice president of human resources. employees to support the many organizations that help “These projects will have a lasting impact and we are enhance the communities where dealers, customers proud of our employees for volunteering their time and employees live and work. and talents to make a difference in their communities.” Through these efforts, Doosan Bobcat teams also Over the course of the service days held this year, have the chance to build relationships not only with more than 260 Doosan Bobcat employees in North each other, but with people and organizations in their America volunteered in the community efforts, supsurrounding communities. porting nearly 30 nonprofit organizations. Employee “Our employees are inspired to identify the needs in volunteers were tasked with projects that included the community and to investing time and resources to helping various nonprofit organizations, working help improve the lives of people in our communities,” with local food banks and soup cafes, completing Winkelman said. “This is an important part of our culconstruction projects and performing various land- Bobcat skid steer loaders, compact track loaders and other ture and commitment to giving back as a community scaping and cleanup work at community recreational machines were used in the efforts. partner.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 15

2018 CATERPILLAR 416F2, ID# 8CR6709, SN HWB01467, 1185 HOURS ........................................$87,920

2005 CATERPILLAR 615C, ID# PUC0116, 9XG01884, 4108 HOURS........................................$195,400

2018 CATERPILLAR 246D, ID# 8CR6494, SN BYF041369, 2055 HOURS ..................................$38,600

2011 CATERPILLAR 160M2AW, ID# SUC0037, SN M9K00206, 6912 HOURS........................................$170,300

2010 CATERPILLAR 120MAWD, ID# TUC0366, SN B9W00198, 8379 HOURS ..................................$86,500

2018 CATERPILLAR 242D, ID# UUC0153, SN DZT04719, 1190 HOURS ..................................$33,000

2019 CATERPILLAR 236D, ID 9CR6861, SN BGZ05323, 694 HOURS......................................$41,450

2017 CATERPILLAR 735C, ID# PGN0653, SN TFJ00247, 3880 HOURS ....................................$372,300

2014 CATERPILLAR D6TLGP, ID# SUR0021, SN KSB01629, 5875 HOURS..................................$191,600

2019 GENIE GR26J, ID# 9AR5502, SN GR-JL-2094, 22 HOURS ....................................................................$33,700

2014 CATERPILLAR 140M2AW, ID# RUC0259, SN M9J00839, 6165 HOURS ..................................$169,520

2013 CATERPILLAR 279C, ID# UUC0252, SN KWB01468, 4670 HOURS ........................................$37,900

2017 CATERPILLAR 272D2, ID# UUC0049, SN BL200762, 2835 HOURS ....................................$37,500

2016 CATERPILLAR 349FL, ID# PGN0402, SN BZ200836, 5390 HOURS..................................$202,250

2019 CATERPILLAR 420F2IT, ID# 9CR6791, SN HWD03700, 1710 HOURS ..............................$100,310

2011 CATERPILLAR 297C, ID# 21B012, GCP01747, 3363 HOURS ................................................................$34,900

Page 16 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113

GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449

www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 17

563-8 872-44112 112

Bellevue (Dubuque), ubuque), Iowa sales@jjscheckel.com jscheckel.com

2002 CA ATT D11R - $1855,000

2005 CA ATT D10T - $348,000 $ ,

2006 CA ATT D9TT - $388,000 $ ,

7PZ High g Horse series, Runs R andd oper p ates a to spec p , U Blade, SS ripperr,, NNew rodd & mainn bbearings g installed. 18,101 Frame hours, 4,800 HHours on documented d CAT bl d w// twin tilt, SSS ripper ipp r.. A/C ld use Track ggroups kpile il machine hi U-blade A/C, HHeaat. Could p near new. Easy dduty stockp Dealer $307,000 machine rebuild. r Pre-emissions, paint, otherwise very straight i as they Machine ne is straight str and clean. i h tractor from good home. from multinational l i i l company. AAs nice h come!! SU blade, MS ripperr.. Machi

2015 Deere 1050K - $328,000

4,650 hours, SU Bladde,, Multi Shank Ripper pp r,, Topc p on hi GX60 Full Auto GPS syst sy em comes withh machine. Straight, clean & oriiiginal i Midwest dirt machine.

RENT OR

2013 CA ATT D6T XW - $19 $198,000 98,000

2020 CA ATT 323 Next Gen - $198,000 $ 1,025 Total hours, 372 at idle, 2D Gradde d Control, C l 42”” BBucket, Manual thumb, 9’6”” Stick S , Remaining f new. CAT AT Warranty till 2024. Save big moneey from

2018 Volvo l L180H - $2338,000 38,000

RENT OR

BUY!

A02912. 6,500 hrs, Zer Z o hour h engine gi , NNew complet p e i h k ripper i r,, GPS d undercarriage g , Multi-shank G rready. EExcellent ll maintenance. i

2016 CA ATT D6T XW - $228,000 A ,

A02910. 5,200 Hours, H 100% New N trackk ggroups being b dy,, eexcellent llen installed, Multi-shank -shank ripper pp r,, GPS ready machine. hi

2012 CA ATT D6T LGP VP PA AT - $139,000 , 2017 CA ATT 390FL,, A002891 - $628,000 2020 CA ATT 330 Next Gen - $258,000 ,

8,500 Hours, 2,700 at idle. CAT AT Ac Accugr g ade d , AROO, O, GPS 6,200 Hours, 2 Year Year fac ffactorryy warranty remainingg, 1,138 Hours, 626 at iddl dle, 2D Grade G d CControl,l AAuxiliary iliary L new U/C. hydraulics, Tool contrrol readyy. Erops p , A/C, Diff steerr,, Goo G odd undercarriage g . 32’’ Boom, 14‘5”” SStick, 66”” 5 YYar ardd Bucket. Like Lik oll, 10’6”” SStick, 4 years remaining Original, Ex conditioon. Full documentation. CAT AT Premier P Warranty. Will not disappoint! i l super clean machine. Reent/Lease or BBuy. 1 Ownerr,, Excellent disappoin i !

2018 CA ATT 320 Next Gen Geen - $157,000 , A02915. 2,450 Total hours, 1,593 Idle dl hours. h Deluxe pack p age g , Factoryy warraantyy remaining. 30”” Bucket B k , 9’6 9’6”” SStick, AAuxiliaary hhydraulics. d li

2008 CA ATT 950H - $138, $$138,000

A02916. 6,250 Hours, H 6.5 Yar Yardd bucket, k 330 Horsepo p werr,, 62,000 lbs, lbs Auxillaryy hyd, Clean andd straight, original machinne.

4,998 Total hrs, 3,084 Hrs at idlee. Onlyy 11,941 hrs “in operation”” . LLegit and documennted. d Quick Q i k coupler. 4 Yar Yardd GP bucket. Maintenance history h since new.

B POWERTRAIN PLUS REBUILDS

ADES R HOLMES SMOOTH DRUM ROLLERBL

NEW!

2013 CA ATT 329EL - $114,000 A ,

4,700 Hours, New 54”” buck b k , 10’6”” SStick, bucket i k Fullyy

loaded, Longg and nd Wide UC, Pattern changer g r,, Excellent Ex llen

condition, OOriginal paint. Rent/Lease /L or Buy.

2015 CA ATT MH30 MH3049 049 - $248,000 ,

2017 CA ATT 986H H,, A02914 - $388 $388,000 9,800 Total hours hours, 2,927 2 Idle hours, 2 Year Year CCAT AATT Powertrain Warranntyy remainingg. Ride control, 11 Yar Yard buck ucket, Ex llen tires. k Excellent

5,300 Total hours rs, 1,800 IIdle dl hours h , only ly 33,496 496 hours in oper p ation. Maatchingg Michelin Radials, ardd GP dials 77.55 YYar Bucket. d scale, sc l , Maintenance history since new. k Integrated In M

2016 CA ATT 836K K - $488,000 $488 000

2015 CA ATT 836K 8 - $458,000

2007 CA ATT 826H - $288,000 ,

8,280 Total hours, 11,179 179 IIdle dl hhours, Ground G d ac access and High g rise hydraulic cab, 111,000 lb oper p ating weigh g t, 35’’ boom, 26’3”” SStick, 55,600 600 to 30,000 lb lifftt ccapacity. i

2012 CA ATT 980K - $238,000 ,

1 Year Factory Warranty Rem R mainingg, 7,050 total frame 1 Year factoryy Warrantyy remainingg, 8,275 Total Totall hours, hours 9,800 Hours on Complet pl e Dealer D l Rebuild. R b ld Good G d used hours, Documented Service historyy since new. Clean 2,937 at idle, onlyy 5,3338 p ation. Service compac p tor w/ full maintenance & service history. i hi 3 8 hours h in i oper main d to work. E ellen ll t feet Cl ready to work. cab, Excellent feet feet, Tested, and ready history since new. Exce feet. Clean, E llen feett, Clean cab, Tested to OEM specs. Excellent

RENT OR

BUY!

Ready to ship!

Holmes 11F - $25,50 , 0 / 16F - $31,500 $

2016 CA ATT 627K 6 - $478,000 8,000 , 2017 Screen reen Machine 514TS3 22018 018 CA ATT RM500B RM500B - $$580 580,000 2 Models, 11’ or 16’’ cuttingg widtth. Made in Iowa. 978 Hours. Remainingg 2 year ops p , A/C, 33.25+29 25+29 Rubberr,, Spyder e par p ts/service factory 5,070 Hours, Push/Pullll , Errops py - $$189,000 189,000 , Triple p Deck Mobile Screen 2006 CA ATT D10T Rebuild In n Process Constr uction ggrade d , extreme dduty. For haul h l roadd & site Cat Warranty. 1 Owner maachine Original paint, Full documented histtory,y, Under Plant, 1,760 Pl 1 760 hours urs, produc d es 4 pproduct d sizes, with a hi , Universal rotor - $885,000. Zero hour Powertrain Plus, lleveling l , compacting & sealing l ddi dirrt prior to rain event. ddealer l care since new, will not disappoin sappoint! 5th scalped oveersize product on the loading grizzly. for both Asphalt Reclam mation or Soil Mixing. OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021

visit

JJSccheckel.com

and w watch our new company video! deo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide.. We are easy to work with & will not be beat at on price and terms! Large Dozers - Cat D8TT,, D9TT,, D10TT,, D11T Large Excavators - Cat 374FL, L, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel.com | www. jjsscheckel.com scheckel com | follow us for forr daily updates:

Page 18 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case Introduces OEM-Fit 2D, 3D Solutions for Excavators Case Construction Equipment’s OEM-Fit 2D and 3D machine control solutions designed by Leica Geosystems, part of Hexagon, is now available for Case D Series excavators from Case SiteControl Certified dealers. This new option ensures that the optimal combination of machine and solution is installed and tested by Case certified precision field specialists. It also simplifies the acquisition process and allows for the technology to be grouped in with the purchase of the machine — combining the financing or lease approval, rate and payment in a single package. “It takes the guesswork out of what solution works best with each machine, and ensures that it is installed and tested by certified professionals before it’s delivered to the contractor,” said Nathaniel Waldschmidt, product manager, Case Construction Equipment. “The excavator and the machine control system are optimally matched and calibrated — helping the owners and operators of each

OEM-Fit offering ensures the proper match of excavator and machine control solution from Leica Geosystems, part of Hexagon, and simplifies the acquisition process with a single financing package.

machine get up and running immediately upon delivery of the machine.” OEM-Fit machine control solu-

tions also increase the residual/resale value of each excavator, confirming to buyers on the secondary market that the system

is designed and proven to work with the machine. “Machine control has the ability to transform the productivity, effi-

ciency and long-term profitability of excavators,” said Waldschmidt. “We’re now making the addition of machine control with excavators completely turnkey, allowing contractors to experience those benefits in an extremely seamless experience with their Case SiteControl Certified dealer.” Leica Geosystems’ machine control solutions offer several features that increase the productivity, accuracy and safety of excavators while providing operators an easyto-use hardware and software platform. “We recognize the value of industry collaboration to provide contractors with accessible and easy-to-use technology,” said Magnus Thibblin, Leica Geosystems Machine Control president. “We are pleased to work with Case Construction Equipment to provide customers OEM-Fit machine control solutions on Case D Series excavators.” For more information, visit CaseCE.com. 

JCB Announces Diesel Mechanic Apprenticeship Program

JCB is looking for talented and ambitious team members who have achieved or are currently pursuing their diesel mechanic certificate to join its diesel mechanic apprenticeship program.

JCB North America announced the creation of a diesel mechanic apprenticeship program that comes with a $2,000 signing bonus for eligible new hires. As part of JCB North America’s continued commitment to workforce development in the Coastal Region and following the success of the current manufacturing apprenticeship program, JCB is looking for talented and ambitious team members who have achieved or are currently pursuing their diesel mechanic certificate to join its diesel mechanic apprenticeship program. JCB North America manufactures skid steer loaders, compact track loaders and defense equipment, and markets a range of more than 300 machines via a network of more than 320 dealer locations throughout the United States and Canada. “JCB is excited to announce the formalization of our new diesel mechanic apprenticeship program,” said Tonya Poole, vice president of human resources of JCB North America. “As our business continues to grow in all areas, so has our need for specialized team members, and with the addition of the signing bonus, we feel JCB is demonstrating that commitment to hiring and retaining the very best talent in our area to provide our customers with the highest quality product in the industry.” JCB also will provide selected team members pathways within manufacturing to include design, testing and product support teams as the business continues to grow. The $2,000 signing bonus will be provided to team members that possess a diesel mechanic certificate upon hire and agree to an 18month employment contract. JCB offers competitive compensation and comprehensive benefits packages and is an equal opportunity employer and a drug free workplace. Applicants are required to submit to standard pre-employment screening. Interested applicants should send current resumes to jcbnaresumes@jcb.com and include Diesel Tech Apprenticeship in the subject line. For more information, visit www.jcb.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 19

Page 20 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 21

Contact Rollie Aspenson (Used Equipment Manager)

at 608-220-1723 rollieaspenson@ brookstractor.com

See our entire used inventory at www.brookstractor.com Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 1995 JOHN DEERE 650G

2018 JOHN DEERE 844K

2019 JOHN DEERE 470G LC

Stk #U689760, 2643 Hrs, Cab w/ AC, Joy Stk #C95153-2, Cab w/ AC, Medium-Long Stk #C96988, ROPS, Pedal Steer, 24" Pads, TC Transmission, PAT Blade, 10586 Hrs ........ Stick Steer, Ride Control, Front Diff Lock, 29.5 Arm, Standard Boom, Wide Pads, 34" Pads, ..................................................$29,000 Tires, General Purpose Bkt............................ Coupler, 54" Bucket, 2360 Hrs ...................... ................$299,000 WITH WARRANTY ................$339,000 WITH WARRANTY

2013 CASE 590SN

2015 JOHN DEERE 524K

2019 JOHN DEERE 544L

Stk #C96606, Cab/AC, 4x4, Extendahoe, Multi Stk #C94572-9, Cab/AC, Double Diff Lock, Stk C95872-7, Cab/AC, Coupler, 3 Spool, Purpose Bucket, Front Coupler, Forks, GP Double Diff, Bucket WARRANTY ..$179,000 3rd Spool, Ride Control, Quick Coupler, GP Bucket, 5347 Hrs ........................$48,750 Bucket, 1147 Hrs ........................................ ................$124,000 WITH WARRANTY

2018 JOHN DEERE 160G LC

Stk #C94573, Cab w/ AC, Cntrl Pattern Select, Medium-Long Arm, Sd Boom, Long Track, 28" Pads, Aux Hyds, Coupler w/ Bkt, 48" Bucket, 967 Hrs ....$169,000 WITH WARRANTY

2020 JOHN DEERE 310SL HL

Stk #C96404, 245 Hrs, Cab w/ AC, Pilot Controls, 4X4, Ride Control, Extendible Dipper, Aux Hydraulics, General Purpose Bkt, 18" Bucket, 19.5 Tires, With Warranty $119,000

2008 DYNAPAC CA134PDB

2018 DYNAPAC CC900

2008 ETNYRE RF50TD3

2016 CASE 621F XR

Stk #CA134AB, 54" Sheeps Foot, John Deere Engine, Blade, 336 Hrs ................$39,500

Stk #CC900AH, 36", Double Drum, Kubota Engine, New / On Lot, 63 Hrs ........$29,500

Stk #C95089, Mechanical Folding Gooseneck, 10' Wide, 22' Bed, Air Brakes ......$22,000

Stk #C95533, 2430 Hrs, Cab w/ AC, Ride Control, 20.5 Tires, High Lift Boom, New Radials, General Purpose Bkt ......$105,000

2018 JOHN DEERE 672GP

2017 VOLVO EC480

2018 DYNAPAC CC5200VI

2018 JOHN DEERE 310L

Stk #C94503-2, Cab w/ AC, 14' Blade, 17.50 Stk #C96365, Cab w/ AC, Medium-Long Arm, Stk #CC5200AA, 77" Double Drum, Stk #U328815, ROPS, 4x4, Pilot Controls, Tires, All Wheel Drive, Push Block, 730 Hrs .... Wide Pads, w/ Bucket, 4620 Hrs .................. Temperature sensors, Drive lights, 22 Hrs ...... Aux. Hydraulics, Bucket, 2088 Hrs ................ ................$259,000 WITH WARRANTY ................................................$145,000 ................$125,000 WITH WARRANTY ....................$58,750 WITH WARRANTY

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Page 22 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 23

Sales • Rentals • Parts • Service • Financing

2017 Komatsu PC490LC-11 2015 Wirtgen WR200 XLI

2014 Caterpillar D6T XW

KM17155M $269,500 3,189 hrs.

WR15003M $314,500 2,000 hrs.

CT14025X 2,540 hrs.

2016 Komatsu D65PX-18

2017 Komatsu D85EX-18

2014 Komatsu D39PX-23

2012 Komatsu PC360LC10

KM16294X $119,500 6,000 hrs.

KM16523M $399,500 2,059 hrs.

KM14199X

Call for Price 2,972 hrs.

KM12252D $118,500 6,150 hrs.

2015 Caterpillar DD9T

$219,750

2015 Komatsu PC138USLC-10 KM15152X 3,900 hrs.

$109,500

2006 Komatsu WA200-5L

2016 Komatsu WA470-8

2013 Komatsu WA200-6

2017 Deere 644K

CT15767X $569,500 8,364 hrs.

KM06305U $61,500 8,343 hrs.

KM16433X $143,500 7,504 hrs.

KM13109X $49,500 10,149 hrs.

$109,250 7,109 hrs.

2008 Caterpillar 963D

2018 Komatsu D65EX-18

2017 John Deere 310LEP

2014 LeeBoy 8510C

CT08803X $139,500 7,139 hrs.

KM18352X $209,500 3,500 hrs.

JD17004J $79,500 1,223 hrs.

LB14006X $79,500 2,219 hrs.

JD17003X

2015 Komatsu HM400-5 KM15268M 9,500 hrs.

$459,500

All sales are subject to availability at time of order, prices do not include taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Worth • Kansas City • Lubbock • McAlester • Odessa • Waco • Oklahoma City • St. Louis • Tulsa

Contact Terry Lyness for details and pricing.

877.549.7501

www.kirby-smith.com

Page 24 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Gov. Kelly OKs $129M Kansas Highway Improvement Projects On July 7, Gov. Laura Kelly announced that six expansion and modernization highway projects in south central Kansas — totaling more than $129 million investments — have been committed to construction as part of the Kelly Administration’s bipartisan transportation plan. “These six highway improvement projects will enhance accessibility and road safety to recruit new businesses and families to south central Kansas,” Kelly said. “Since day one, we’ve honored our commitment to ending the practice of using infrastructure dollars for projects they were never meant for — and instead use these dollars to directly fix our roads, bridges and expand broadband access. Today’s announcement is further proof that our commitment to good stewardship of these funds is benefitting our communities, taxpayers and businesses.” These are the first IKE highway modernization and expansion projects KDOT is committing to construction. Previously, these projects were in the IKE development pipeline.

Gov. Laura Kelly announced six expansion and modernization highway projects in south central Kansas totaling more than $129 million have been committed to construction.

The largest project announced involves the I-235 North Junction in Wichita that will alleviate congestion, upgrade 19 bridges within the area and replace the tight loop ramp from K-96 to I-135 with a flyover. Other improvements include rehabilitation and adding shoulders to portions of U.S. 160 in Sumner County and K-42 in

Sumner and Sedgwick counties and extending existing passing lanes on portions of U.S. 50 in Harvey County as well as on a portion of U.S. 50 in Harvey and Marion counties. “This week we are announcing projects totally nearly three-quarters of a billion dollars as part of the Kelly Administration’s transportation plan,” said Julie Lorenz,

KDOT secretary. “This significant investment in the state’s transportation infrastructure proves that by listening to Kansans and working with communities, we can complete more projects and identify better ways to deliver them.” The projects announced in Wichita are currently scheduled to be let in 2023 except for the North Junction project, which will let in

2022. As promised, one phase of all TWORKS projects will be let to construction before construction begins on the IKE projects. KDOT will host meetings this fall to identify additional regional priorities to be added to the development pipeline and continue working on those projects placed in development in May 2020. 

USDOT Awards Nearly $1B in INFRA Grants Across 18 States The U.S. Department of Transportation plans to award $905 million to 24 projects in 18 states via the Infrastructure for Rebuilding America or INFRA discretionary grant program. USDOT said it selected those INFRA grant recipients based on several criteria. In addition to prioritizing projects that would improve local economies, create jobs and meet all statutory requirements, the agency considered how those projects would address climate change, environmental justice and racial equity. Further, USDOT prioritized funding to rural areas to address what it called “historic underinvestment.” As a result, approximately 44 percent of total INFRA funding will go to rural projects, which exceeds the 25 percent minimum share for rural projects required by law, the agency said in a statement. Nine state departments of transportation received grants during this round of INFRA funding awards to support a variety of infrastructure projects: • The Illinois Department of Transportation received more than $19 million to build a grade separation on Archer Avenue roadway and two existing Belt Railway of Chicago rail tracks. The project will reconstruct Archer Avenue and lower it approximately 15 ft. under a new rail bridge to serve the existing BRC tracks; add elevated pedestrian and bicycle sidewalks under the rail bridge; and install a combined storm and sanitary sewer system. • The Indiana Department of Transportation received $70 million to complete the Clear Path 465 project. The proj-

ect includes the reconstruction and expansion of the I-465/I69 system interchange northeast of Indianapolis, approximately 4.5 mi. of mainline I-465 from the White River to Fall Creek, and approximately 0.8 mi. of I-69 from I-465 to 82nd Street. • The Texas Department of Transportation received $50 million to improve approximately 7.4 mi. of I-35 across Texas, Oklahoma and the Chickasaw Nation. The project includes widening the interstate; modernizing the corridor design by flattening curves; and replacing the northbound and southbound bridges with wider and higher structures over the Red River. It also involves updating the frontage roads; installing a fixed concrete barrier in the median; adding retaining walls and culverts; installing intelligent transportation systems improvements including dynamic message signs; adding pedestrian elements; and converting an interchange. • The Minnesota Department of Transportation received $60 million to fund a series of improvements along 3 mi. on I-494 between U.S. 169 and the Minneapolis-St. Paul International Airport. This project will include construction of MnPASS Lanes; interchange and ramp improvements; and pedestrian connections on the segment between Highway 100 and Highway 77. This project is part of a larger approximately 9.5-mi. corridor project. • The South Dakota Department of Transportation received more than $61 million to reconstruct approximately 28 mi. of I-90 in McCook and Minnehaha counties between

mileage reference markers 362 and 390. The project will remove and replace the existing surface on both I-90 eastbound and westbound lanes as well as rebuild nine functionally obsolete and structurally deficient structures. It also will provide safety and operational enhancements and add truck parking spaces at the westbound and eastbound rest areas. • The Maine Department of Transportation received more than $45 million to replace 14 aging bridge decks, all of which are on the National Highway System and many of which are on the National Highway Freight Network — helping facilitate freight movement across critical freight corridors into, within and out of Maine. • The Oklahoma Department of Transportation received more than $50 million for a lane addition and interchange improvement project on I-40 and the Douglas Boulevard Interchange. • The Pennsylvania Department of Transportation received more than $21 million to fund a series of improvements on a segment of PA 61. • The North Dakota Department of Transportation received more than $16 million to construct passing lanes along approximately 165 miles of two-lane U.S.-52 between Carrington and Kenmare. As required under the current Fixing America’s Surface Transportation or FAST Act legislation, Congress gets 60 days to review USDOT’s proposed project awards. After the 60-day review period, USDOT is then free to commit nearly $1 billion in INFRA funding. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 25

KANSAS CITY • JOPLIN • WICHITA TOPEKA • GARDEN CITY ASPHALLTT COMPACTION

SOIL COMPACTION

816-241-9290 www.VLPCO.com

SALES • PARTS • SERVICE

BOMAP CON NNECTT::

YOUR Y OUR LINK LINK TO BETTER P PRODUCTIVITY BUY Y 12 MONTHS, GET G 6 MONTHS ADDED FREE*

FREE TTABLET ABLET & TABLET HOLDER** TABLET

100% FREE SET-UP & TRAINING

BOMAP Connect is a subscriptioon-based cloud solution, connecting the BOMAPP app with the ability to plan, track and document multiple compaction projects.

New CASE DV23D Double Drum Asphalt Rollers, EQ0009171

New CASE SV207ESM Smooth Drum Rollers with Shell Kits, EQ010906

2021 CASE SV185B, EQ0011164

New CASE SV208DSM Padfoot Roller, EQ0008569

CASE 580SN T4B

CASE 621G T4B

CASE 821G T4B

Epiroc Hydraulic Breakers available

And now is the best time to sign up because this deal won won’tt lastt forever. For o more informattion, visit www.bomag.com m *Offer good until Sept. 30, 2021. **W While supplies last.

IOWA

KENTUCKY

MID COUNTRY WILSON EQUIPMENT CO., LLC. L MACHINERY, Y, INC C. LEXINGTON, KY FORT DODGE, IA 859.254.6443 515.574.2302 www.wilsonequipment.com m www.midcountrymachineery.com

ILLINOIS WEST SIDE TRACTTOR SALES CO. LISLE, IL 630.355.7150 www.westsidetractorsalees.com

KANSAS BERRY COMP PANIES, ANIES, INC. WICHITTA, A, KS 316.943.4246 www.berrycompaniesinnc.com ROAD BUILDERS MACH HINERY AND SUPPLLY Y KANSAS CITYY,, KSS 913.371.3822 www.roadbuildersmachinery.com THE G. W. VAN VAN KEPPEL KEPPEEL CO CO. KANSAS CITYY,, KSS 913.281.4800 www.vankeppel.com

NORTH DAKOTTA A TITTAN AN MACHINERY, Y, INC. FARGO, ND 877.886.7010 www.titanmachinery.com

MICHIGAN

OHIO

MIDLAND ENGINE, INC. MIDLAND, MI 989.631.4608 www.midlandengine.com

SOUTHEASTERN EQUIPMENT CO. CAMBRIDGE, OH 740.432.6303 www.southeasternequip.com

MINNESOTTA A SOUTH DAKOTTA A

ROAD MACHINERY & SUPPLIES CO. SAAVVAGE, MN 952.895.9595 www.rmsequipment.com

DIESELL MACHINER MACHINERY, Y, INC. SIOUX FALLS, FALLS, SD (605.336.0411 www.dieselmachinery.com

RUFFRIDGE-JOHNSON EQUIPMENT CENTERVILLE, MN 612.378.9558 www.rjequip.com

TRANSOURCE TRUCK & EQUIPMENTT,, INC. SIOUX FALLS, FALLS, SD 605.336.2000 www.transourceusa.com

MISSOURI

WISCONSIN

ERB EQUIPMENT CO., INC C. FENTON, MO 636.349.0200 www.erbequipment.com

MILLER-BRADFORD & RISBERG, INC. SUSSEX, WI 262.246.5700 www.miller-bradford.com ill b df d

THINK FUR RTHER. T THER. PAR P RTNERING G FOR THE FUTURE.

Page 26 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

5920 North Lindbergh Blvd. Hazelwood, MO 63042 314-895-9500 www.patkelly.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 27

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Bucyrus Erie 22-B Dragline, 1:50 scale - $290

Bantam Lattice Crane on White WC22 Carrier, 1:50 scale - $160

Caterpillar D6H Track-Type Tractor, 1:50 scale - $150

Allis Chalmers TS300 Cable operated Motor Scraper, 1:50 scale - $110

Caterpillar 245 Hydraulic Shovel, 1:50 scale - $80

Caterpillar D8R,Series II Track-Type Tractor, 1:50 scale - $75

Cedarapids Grayhound Track Paver, 1:50 scale - $75

Caterpillar 627 Motor Scraper, 1:50 scale - $75

JCB 217S Backhoe/Loader, 1:50 scale - $75

Caterpillar 245 Excavator, 1:50 scale - $75

Case 20C Wheel Loader, 1:35 scale - $75

Caterpillar AP600D Asphalt Paver, 1:50 scale - $65

Caterpillar 825B Landfill Compactor, 1:50 scale - $50

Caterpillar D350D Articulated Dump Truck, 1:50 scale - $50

Caterpillar 226B 2 Skid Steer Loader, 1:32 scale - $50

Komatsu D355A Dozer w/Ripper, 1:50 scale - $75

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Page 28 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Backwoods Grading Increases Productivity With Bomag Josh Miller is the proprietor of Backwoods Grading, Landscape and Excavation, a family-owned business headquartered in Fairview, N.C., just outside of Asheville in the Blue Ridge Mountains. Miller uses the Bomag BMP 8500 articulated, dual-drum, radio-controlled multipurpose compactor, specially designed for earthworks, just about every day and “it works as advertised.” “We’ve used Bomag products our whole time in business because we do a lot of compaction work. One of our specialties is boulder retaining walls, but we build a lot of water features, grading for roads, driveways, house sites, doing a lot of compaction work in the footers. “The Bomag product sets itself apart. We started out renting whatever the company had, but after we started working with James River Equipment out of Asheville, they just really sold us on the Bomag 8500 product. For the past five years we’ve used it almost every day.” Miller likes the 36-in. wide trench roller with remote control because of its versatility. “We didn’t have to hire an extra guy, because whoever was on the Josh Miller, proprietor of Backwoods Grading, Landscape and Excavation, uses the Bomag BMP 8500 articulated, dual-drum, radio-conskid steer or the track hoe could just trolled multipurpose compactor, specially designed for earthworks, just about every day and “it works as advertised.” carry the remote with him and stay in the machine in the air conditioning Miller also is impressed by the reliability or the heat, depending on the season. The of his Bomag 8500. guys love it because they can charge the “We haven’t had to send it in for any kind remote overnight, get to the job next mornof service problems. Any issue we’ve had ing, start it up from inside the cab, and we just make a quick call over to James they’re able to move dirt and compact it all River to the service department and they at the same time. It’s really reliable.” were able to talk us through just about any This prevents Miller from having to hire issue we’ve had over the phone. They an extra person to sit out there and ride on a haven’t had to come out to the job site once.” roll compactor all day long, he said. Miller and his crew aren’t the only ones On a recent project where Backwoods taken by the compactor. Customers also are Grading, Landscape and Excavation was impressed. doing an 18-ft. lift with boulder terrace “They couldn’t believe the compactabiliretaining walls it was able to compact the ty. They’re getting out there and they’re whole way up with the Bomag. walking on it and they just can’t believe how “It’s got our compaction up to 99.8 perhard the ground is. We have a lot of people cent the whole way. It’s been outstanding that are like, ‘My gosh, I can’t believe you’re because the roller really holds its ground. It’s doing this so fast.’ not easy to tip. I’m not saying you can’t get “Uptime is amazing. I’m not having to one up on its side, but the guys working on stop my job to make repairs or pay an extra some of these steep-slope inclines were The Bomag 8500 36-in. wide trench roller with remote control. guy to come out there with this massive fiveworking on a 30 to 40 percent grade someor six-foot trench roller, and it gets the comtimes and we’re able to set the roller down be there that much and save you time and tle 36-inch trench roller and you couldn’t fin- paction where we need it and it’s going to there and take off with it,” Miller said. money, it’s amazing to be honest. We love it. ish a million-dollar project without it — move me on to the next job faster, then why According to Miller, Backwoods not spend the extra money? It’s a no-brainer. “The quality of the work we do at that’s saying a lot. Grading, Landscape and Excavation is on Backwoods wouldn’t be possible without “You sit out here with millions of dollars We couldn’t do our job if we didn’t have this track to build approximately 50 retaining Bomag. When you’ve got multiple excava- of equipment and your job sort of rotates product on our job site every single day. It walls this year, and the Bomag will be on at tors, dozers, skid loaders, and everything around a little 36-inch trench roller that holds makes our job and our life easier. It saves me least 90 percent of those jobs. else we’ve got to have in our industry, and up like a Trojan soldier. That’s pretty awe- thousands of dollars and, overall, it’s been “Whenever you’ve got a product that can one of your main pieces of equipment is a lit- some.” top quality.” 

Pages 29-39

Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

MB Crusher Transforms All Sites Into Recycling Centers Produce your building material, using your heavy equipment, wherever the job site is located. This is the easiest solution for many companies now that procurement is becoming more complex, expensive and it takes longer. And it is also the practical solution when the construction sites are located in areas where heavy vehicles have a hard time reaching it, where there aren’t connecting roads or in historical centers with traffic restrictions. For example, in Bulgaria, a company had to demolish an old house and had limited When a landslide damaged the Santo Spirito bridge in Italy, an MB crusher and screening bucket helped the contractor exceed standards. space. They installed an MB-L160 crusher bucket on the Case backIn France, a company constructing hoe loader they already had on-site, making 745 housing units used an MB-S18 screening bucket to select the fine it quick and easy to load the debris, crush it materials. on site and obtain quality material that they could reuse as the foundation for the new homes. They saved time and reduced their expenses: they didn’t need to process the material further by transporting it and repurchase it from the recycling centre or a quarry. The result? A material that all companies can obtain on-site at no extra cost. This applies to those who work on large In Bulgaria, a company installed an MB-L160 crusher or small urban redevelopment sites or those bucket on a Case backhoe loader to demolish an old house. often involved in road works, bridge demolitions, or road construction, and those who disposal fees and material purchasing fees. also work in quarries. Materials can be Thierry Bastide, manager of Société Travaux Publics reused to create internal roads, fill holes and Bastide, the company in charge of the contract, said, “the reduce management costs by half. advantage is that you put back the materials that you have With MB Crusher’s equipment, you set extracted.” up an actual recycling center on-site, with The advantages don’t stop at reducing transportation fees the following advantages: independence and the cost of treating or disposing of waste but extend to from other suppliers, reduced processing the material’s quality. A recent example is when the Santo times, eliminating transportation costs, Spirito bridge in Puglia, Italy, was damaged by a landslide ready-to-use quality material. and needed to be demolished. The company used MB’s In Nimes, France, a company constructThey recycled all of the material: the MB-S18 screening crusher and screening bucket to crush and reduce the mateing 745 housing units needed to redevelop an old farm road for inter-district service and excavate and create a drainage bucket selected the fine materials, while the BF80.3 crusher rial they obtained down to their desired output size. They acquired material that exceeds the standards to be network for rainwater. In this context, where you need to bucket processed the larger rocks. The aggregates they excavate and produce a large amount of inert waste, the nec- obtained were reused immediately by laying them over the reused on the job site to create the road substrate that they drainage network trench, avoiding all logistical and material needed to reconstruct the bridge.  essary choice was MB Crusher’s equipment.

Page 30 • July 24, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

www.aisequip.com m 33600 N Grand River Av Ave L i Lansing, MI 48906 48906 5177--321-8000

Sa aginaw 4600 46 00 AIS Drive Di Bridgepo ort, MI 48722 722 989-777 9897777-0090 0090 Grand Rapids Travverse City 600 44th Street SW 8300 M-7 -72 East G Grand Rapids, MI 49 49548 Williamsb burg, MI 4969 49690 231--2267 267-5060 616-538538--2400 West s Detroit Northeast Detroit 56 6555 Pontiac P Trail 65809 Gratiot Av Avenue New Hud dson, MI 4816 655 Leno ox x, MI 48050 248--4377--8121 586--7727 27--750 5022 800-4 457 57--8121

www.butlermachinery.c y com 3402 02 36th St SW Fargo, ND 58014 701--2280-3100 800--7726--77475 3630 Miriam Av Ave Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-4 45656-1400 1201 S 46th St Grand G d Forks, F k ND 58201 701--77 7775-4 4238

1505 Hwyy 2, Bypass E Minot, ND 58701 701-8 852-3508 4950 E High Highway 12 Aberdee en, SD 5774 401 60505--22 225-6 62240 3601 Deadwood Av Ave N Rapid City C , SD 57770 02 60505-34 42-4850 2-4 2057 0571 Tru uck Stop A Avve Pierre e, SD 57750 501 60505--22 2244-5400 3201 N Louise Av Ave Sioux Fa alls SD 5771107 alls, 605--336-3010

www.centralsands.co om 4219 E 50th St • Des Moines, IA A 50317 50 800--2247 47-2400 • 515-964-8 8600

G Good work deserves good tools The Lokotrack® ST2.3™ mobile screen

www.rbscott.com 1011 Short St • Eau Claire, WI 54 47701 715-832-9792

The Lokotrack® ST2.3™ mobile screen provides depe endable screening power and the best screening performance in its weight cla ass. Its wide screening area, aggressive stroke and large screening angle make th he ST2.3 the ideal tool for Ŧ Ę ĝ Ę Ť ě Get the job done with the Lokotrack ST2.3 mobile scr c een. Con ntact your Metso Outotec distributor or learn more at mogroup.com/lokotrack.

www.roadbuildersmachine ery.com y 1001 S 7th St Kansas City, KS 913-371-3822 4115 S 90th St Omaha, NE 4022-331-9 92200

5601 Fle etcher Av Ave Linccoln, NE 40202-3325-044 477 4949 49 Ju Juer uergen Rd Grand Island, NE 308-3384--2620

1303 S Chestnut St Norfolk, NE 40202-316-4640

mogroup.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2021 • Page 31

Page 32 • July 24, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Celebrating First Anniversary as Metso Outotec, Biz Cites Culture as Success Key One year ago, Metso and Outotec merged and created a new leader in the mining, aggregates and metals refining industries, making the most of the expertise that covers the full spectrum of products, services and solutions from ore bodies to metals. With more than 15,000 employees, presence in over 50 countries and sales close to 4 billion euros in 2020, it is one of the largest in its field. All-Embracing Sustainability Metso Outotec’s strategy is characterized by a strong focus on sustainability and commitment to the 1.5C climate target. Mining, aggregates and metals refining industries play a significant part in improving energy and water efficiency, reducing emissions and advancing circularity globally. “Our shared ambition with our customers and society at large is to use natural resources in a responsible manner,” said Pekka Vauramo, president and CEO of Metso Outotec. “A significant share of our business today comes from technologies that help our customers improve safety, lower their energy and water consumption or reduce emissions. It is our aspiration to be their first choice.” To address its customers’ challenges, Metso Outotec launched 24 new products or services during its first 12 months, such as energy- and water-efficient mining and industrial filtration solutions, circularity solutions to treat electronic scrap, a furnace camera for safer smelting operations and three shutdown services programs for improved performance. More than 100 products that provide sustainability fea-

tures with the company’s Planet Positive label is a tangible sign of its commitment to a safer or more environmentally advanced processing of minerals and metals, according to Metso Outotec. More than 90 percent of Metso Outotec’s R&D projects also have sustainability targets defined. The company’s progressive work to advance sustainable business was acknowledged in early 2021, as Corporate Knights named Metso Outotec eighth in its list of the world’s most sustainable companies. Synergies On Target, Culture Evolving Synergies from joint operations are progressing well. By the end of March, the achieved cost synergies totaled EUR 83 million and the target of 120 million year-end run rate is within reach. Revenue synergies from cross-sales opportunities also are supporting sales. Creating a new Metso Outotec company culture has been identified as a crucial part of future success. The company is building a performance culture where the employees can thrive and grow and at the same time live by the company values, excel in their capabilities and maintain high ambition and engagement, according to the company. “Looking back, we have witnessed great progress during the first 12 months together, and it has truly been a remarkable journey,” said Vauramo. “Not only are we doing well against our synergy targets, but it has also been great to see how well our sustainability-focused strategy resonates with our customers, employees and other stakeholders, and how they recognize the value we generate. 

Quarry Academy Announces Alexandra Gregor as 2020 Scholarship Winner The Quarry Academy 2020 scholarship winner is Alexandra Gregor, a mining engineering and management student from the South Dakota School of Mines. Gregor is originally from Sioux Falls, S.D. “I am grateful for this opportunity and am excited to see where this brings me in the future,” Gregor said. The yearly Quarry Academy seminar, organized by Dyno Nobel and Sandvik, is designed for those who serve in the aggregate industry and focuses on teaching participants how to produce aggregates efficiently. Raphael Carmona, VP North America at Sandvik Rock Processing Solutions, said, “The next generation of professionals will support our industry by finding even more sustainable and productive ways to work going

Alexandra Gregor

forward. We, as Sandvik, are very proud and honored to be able to award exceptional students like Alexandra, who will for sure help the industry to continually provide a great service to our society.” Mike Romano, SVP Corporate Accounts & Technical Services, said, “Dyno Nobel is excited to support the aggregates industry’s future leaders through the Quarry Academy Scholarship. We’d like to congratulate Alexandra on her outstanding achievement and look forward to seeing her make a positive impact on the industry.” The 15th Quarry Academy seminar will be on Nov. 16 to 18, 2021, in San Antonio, Texas. Details for the next Quarry Academy seminar will be published at www.quarryacademy.com. 

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640

West Chicago, IL 630-293-0606

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

Wauconda, IL 847-526-4255

www.atlasbobcat.com

Yorkville, IL 630-553-0150

1200 East Highway 13 Burnsville, MN 55337 952-894-0894 Now open Saturday 8am-12pm CST

588 Outpost Circle Hudson, WI 54016 715-531-0801 Now open Saturday 8am-12pm CST

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

www.tristatebobcat.com

Cincinnati, OH 513-874-8945

Reynoldsburg, OH 614-863-1300

Mt. Orab, OH 937-444-3865

Zanesville, OH 740-313-0087

Hillard, OH 614-876-1116

Lexington, KY 859-254-3936 www.bobcat-ent.com

Bobcat of Indy 2935 Bluff Road Indianapolis, IN 46225 866-442-3052

4489 S Indianapolis, Road Whitestown, IN 317-769-4946

2075 E CR 67 Anderson, IN 765-643-4222

2002 West 3rd Street Bloomington, IN 812-287-8042

www.bobcatofindy.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2021 • Page 33

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

LARGE EQUIPMENT DEALERS THE BEAST 2460XP Trrack Horizontal Grinder

Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255

MODEL BTC-300 M BT B Trrack Carri rie ier

M MODEL 3590XL W Whole Trree Chipper pp

IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p

677500 Millbrook Rd. • Remus, MI M 49340 • 1-800-952-0178 FIN FIND ND US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

MODEL SG-75 Trrack kS Stump pG Grinder i d

www.lec1.com

Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer

Page 34 • July 24, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

FAE PT LINE: GET USED TO BEST IN CLASS

fae-group.com

(770) 407-2014 - info@faeusa.com

Setting The Standard In Static Screening Since 1998 With the largest selection of adjustable bar grizzlys available anywhere

YOU DON’T HAVE TO COMPROMISE Produce Many Products With A Single Grizzly Set the deck bar opening you need and produce the exact material required You don’t have to settle for reducer grates that only allow two sizes, usually too large or too small

• Deck Bar Adjustments In 1” Increments • Safe / Self Cleaning ROCK RELEASE

NEW! 2021 Eagle Crusher 6 x 20 Horizontal Triple Deck Screen, SR#31817 CALL FOR PRICE

2020 Lippmann LTS100 Tracked Stacking Conveyor, SR#90418, 552 Hrs CALL FOR PRICE

• New Deck Bar Attachment System • Easy Deck Bar Replacement

Lorem ipsum Lorem ipsum

2019 McCloskey 516RE Wheeled Trommel Screen, SR#89946, 774 Hrs CALL FOR PRICE

2021 MDS M518R Recycling Trommel Screen, SR#M518R042107 CALL FOR PRICE

Rock Grizzlys is all we do, contact us anytime to discuss your rock screening needs.

541-383-3700

rocktough.com SAMS & DUNNS Listed

800-496-3431

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2021 • Page 35

mhl 375 F -SERIES

COMPANY WRENCH www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850 1330 KY-151 Frankfort, KY 40601 502-699-2681

ERB EQUIPMENT COMPANY

STRONG. RELIABLE. E EFFICIENT. Discover Morre Fuchs World- Class Material Handlers

www.erbequipment.com 200 Erb Industrial Dr. Fenton, MO 63026 636-349-0200 Foristell, MO 636-463-2500 Cape Girardeau, MO 573-334-0563 Cuba, MO 573-885-0500 Owensboro, KY 270-684-2339 Paducah, KY 270-554-1131 Mount Vernon, IL 618-244-6800 Evansville, IN 812-473-0484

Page 36 • July 24, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Terex MP Acquires MDS International of Monaghan, Ireland

MDS International manufactures heavy duty and recycling trommels, apron feeders and conveyor systems (pictured left), a product range that complements other Terex brands such as EvoQuip (pictured right).

Terex Materials Processing (MP) announced the purchase of MDS International (MDS), a manufacturer of heavy-duty and recycling trommels, apron feeders and conveyor systems, based in Co. Monaghan, Ireland. MDS was founded in 1995 by Liam and Una Murray, with a vision to design and develop engineering solutions to industry. Over the past 25 years MDS has built a highly skilled work force along with global distribution partners, and has a valued reputation for innovation, offering bespoke solutions to serve client needs with equipment that can withstand the harshest of environments. This acquisition supports Terex MP’s growth strategy to expand its offering in the crushing and screening and environmental industries, with products that complement the existing portfolio. Trommels from MDS are heavy duty trommels that will enable expansion into areas of the market that Terex MP does not currently serve. Additionally, Terex MP expects strong commercial synergies from this deal, as several Terex MP distributors already carry the MDS line, while others will be new to Terex, offering the potential to develop new channel partner relationships.

(L-R): Pictured at the announcement is Conor Hegarty, general manager and business line director of MDS — a Terex brand; Minister Heather Humphreys, TD of the Cavan–Monaghan constituency; Pat Brian, vice president and managing director, mobile crushing and screening, Terex; and Liam Murray, founder of MDS International.

MDS’ 34,000 sq. ft. facility will be the first Terex location in the Republic of Ireland, which diversifies its footprint and provides access to a new labor pool. Additionally, the facility is within a short driving distance to the Terex Dungannon and Omagh sites, providing ready access to Terex MP’s Northern Irish team and enabling

close coordination with the resources at these facilities. The MDS facility and its highly skilled team members will be led by Conor Hegarty, general manager and business line director. Previously, Hegarty held the position of international sales director of Terex Ecotec, and his commercial background and product

knowledge will be a huge asset as he takes leadership responsibility for MDS, the company said. MDS will remain a standalone brand along with Terex MP’s Crushing and Screening businesses including Powerscreen, Terex Finlay and EvoQuip. Terex MP will build on the momentum of MDS International’s long-standing

reputation, continuing to develop the brand, its product portfolio and its distribution channels. Commenting on the announcement, Pat Brian, vice president, mobile crushing and screening, Terex MP said, “The addition of MDS to our portfolio of businesses will bolster our growth and improve our product offering. The business has been well managed, is on a terrific growth trajectory, and its heavy duty trommels address a gap in our own product lines while also having a lot of synergy with what we already manufacture and distribute.” Liam Murray, co-founder of MDS International said, “I am so proud of how MDS has grown over the past 25 years — to have a multinational company like Terex interested in our business is a testament to what we have achieved. MDS will now have the global resources of Terex to develop and grow it to new levels; I feel this is the right move for our business and team. This sale will also bring new levels of support to customers and dealers worldwide. I will always care deeply for our MDS family and will remain on board for a period of time, in order to support a smooth transition to Terex ownership.” For more information, visit www.terex.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2021 • Page 37

A WIRTGEN GROUP COMPANY

T WO O POWERFUL PR RODUCTS. ONE GREAT RESULT. KLEEMANN CRUSHING AND SCREENING G PL ANTS

PERFORMANCE AND EFFICIENCY Y.. KLEEMANN crushing and screening plants can be optimally combined to create a quality end-produc t. An extensive selec tion of mobile jaw, impac t and cone crushers and screening plants, available as scalping and classif ying screens, open up the most diverse applications. With KLEEMANN plants, you’ll achieve the best results – in natural stone, recycling and mining. www.wirtgen e -group.com

WIRTGEN AMERIC A , INC . · 6030 Dana Way · Antioch, TN 37013 · Tel: (615) 501- 0600 · Fax: (615) 501- 0691

www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

www.rolandmachinery.com

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Page 38 • July 24, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Illinois

Northern Indiana

Midwest Crushing & Screening

(6 Counties)

7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com

847.271.5027

Kentucky

Indiana

Minnesota

& Michigan

Powerscreen Crushing & Screening

Powerscreen Crushing & Screening Indiana

Theco, Inc.

Powerscreen Michiana

11901 Westport Road Louisville, KY 40245

12346 Southeastern Ave Indianapolis, IN 46259

www.powerscreensales.com

800.227.0534

317.778.6677 • 800.227.0534

255 N. Hetzler Court Angola, IN 46703 www.powerscreenindiana.com

260.665.5816 • 800.843.4277

Ohio

Missouri & Kansas

AGGCORP

Powerscreen Central

14833 164th Ave. S.E, Big Lake, MN 55309

22800 Lakeland Blvd. Cleveland, OH 44132

9001 Hickman Mills Drive Kansas City, MO 64132

www.thecoinc.com

www.aggcorp.net

www.powerscreensales.com

763.263.0505

614.309.6854

502.326.9300

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • July 24, 2021 • Page 39

573-635-8700 • 888-972-2537 • www.rackersequipment.com

#410073 John Deere 750KLXT dozer with 6 way blade. 75% undercarriage, 165HP motor with 2383 hours, EROPS cab with AC and heat, with sweeps and brushguards. Has Vail 5 pocket ripper with 3 shanks only. Very good condition.

#510122 Furukawa 1100ED self contained hydraulic rock drill 1321 hours on Cummins QSB6.7 engine & 490 hours on HD818 drifter. FOPS/ROPS cab w/ AC & heat. Auto-rod changer, auto-greaser, dust collector, & anti-jam. Set up for T-45 M/F rods. Includes rear/side view camera & rear bumper. Very good cond.

#161009 New Willis 36"x60' tube-type radial stacker. w/ 15hp Westinghouse motor, NBS #5 reducer, 4-ply belt, Superior 35 degree CEMA C 4" idlers w/ 4" CEMA C return idlers. Lagged head and wing-tip tail pulleys w/ Dodge bearings. Pintle hitch and pivoted mounting plate.

FORCE MULTIPLIER A new era is being ushered in with Rammer® fully investing in Allied® Construction Products to deliver enhanced products, service, and support the growing North American markets.

#510113 (2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4892 hours) & HD-709 drifter (2203 hours). Set up for T-45 Steel (14′ starter & 12′ changes). Has anti-jam circuit and dust collector. One-owner machine and all service records available. Well maintained and in very good condition.

#154006 "New" Aggretek portable wash plant w/ 6x20 3-deck screen and twin 36"x25' sandscrews complete with electric motors, electric box and starters, wire cloth, and NiHard shoes, all on a 3-axle chassis.

#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.

The combined forces will be stronger than ever, bringing you the latest Rammer technology with Excellence and Performance Series breakers as well as our pioneering Ho-Pac and Skid-Pac compactor drivers. Together, and stronger than ever, the world-famous Rammer and Allied continue to prove... there’s no match for experience and innovation.

#310002 Broderson 15-ton carry deck 4WD crane 45' main boom & 15' jib. GM V-6 gas/ propane hook block and anti-two block. On board computer w/ scales and tip read-out.

#650000 2011 John Deere 410J backhoe with 1442 hours. 4-in-1 bucket, pilot controls, AC/heat, radio, and quick attach bucket. Like new tires 21L-24-12.5/8-18

DRILLS & COMPRESSORS #510115 Furukawa 1200ED hydraulic rock drill with 12,206 overall hrs & 3154 hours on Cummins 6.7 remanufactured engine. 5776 impact hrs but only 39 hours on drifter re-seal. Includes cab with a/c & heat, dust collector and an anti-jam circuit. Good condition. #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510116-Furukawa 15ED Hydraulic Rock Drill. Has twin Isuzu engines. 5667 hours on hydraulics, 4413 hours on compressor, and 5992 impact hours. Very good undercarriage. Enclosed cab w/ AC and heat. Dust collector, auto rod changer. Set up for T51 rod. Overall good condition. #510119 Furukawa HCR1500ED drill. approx 18,100 hours. 8.3 Cummins engine. Runs well, still in use. Well maintained. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.

JAWS & IMPACTS #111072-Pioneer 3042 jaw on shop built 2 axle chassis with Cedarapids 42"x16' grizzly feeder, 41/2' grizzly bars, jaw dies 95% good, 42" underconveyor, WEG motor, 16' hopper, 3/4" thick hopper sides and ends. Good condition. #112046-Metso Nordberg LT1213S Loko Track mobile crushing & screening plant x47". 12 cubic yard hopper w/ vibrating grizzly feeder. Screening module is 2005. Conveyor width 47" & feed width 43". #111076 Universal 2436 cast-based roller bearing jaw crusher Fair jaw plates. #111075 Portable Portec/Pioneer SM3042 jaw plant Cummins C-N14 engine (runs good), 42"x16' apron feeder (good flights), & 4x8 2-deck Mesabi w/ reversable 30" underconveyor, 36" undercrusher front delivery conveyor. All on a factory 3-axle chassis. Has onboard electric hydraulic pump & reservoir w/ controls to operate a 4-point hydraulic leveling system for fast set up with legs, onboard fuel tanks, operator platform & controls. Disassembled for transport, ready for work when re-assembled. Will need approx 100kw gen set for electric motors.

#141154 Anaconda self-contained 4x10 2Deck track-mounted scalping screen w/ 3 hydraulic folding stockpile conveyors & JCB 444 EcoMAX 74HP engine (T4F). Flipdown hopper tailgate for direct feed. Variable speed for all belts. Max feed up to 16" & machine is rated up to 250HP.

800-321-1046 / www.alliedcp.com

EXPERIENCE & INNOVATION Glass all good. 22" single grouser pads, overall condition of undercarriage is 60%. Pins have tit on drive side. Has 4600 hrs. SCALES #170005-Thurman 10'x60' 70 Ton truck scales with steel deck and digital readout and up to date certification. Ready to be delivered and installed.

ALTA EQUIPMENT COMPANY

SCREENS #141120-Nordberg 6x20 3-deck incline screen with ball tray on bottom deck. No motor, but was a running take out. Good condition.

SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. #121053-Cedarapids 5040 Hammermill secondary EARTHMOVING crusher with 5x16 3-deck screen. Has rotovator, #410072 Cat D8K with open ROPS and sweeps 36" return and 36" front discharge conveyors. All (limb risers), D342 engine, 24" grousers, 21/4" mounted on tandem axle chassis. Plant is all electric height. Undercarriage 60-70%. Good condition. FEEDERS except the hammermill is diesel jack shaft driven. #640057 John Deere 330LC with 11,367 hours, #132015-Continental Gin 48"x25.5' apron feeder. runs great. Needs new undercarriage. JD Hendrix No power on mill. Power unit and control panel are Large feed box. Flights are approx 80+%, good available separately for $12,000. Engine runs, but quick attach, does not come with a bucket. sprocket, & jackshaft drive gears. 60hp motor and needs to be rebuilt. #410063-CAT D9H w/ EROPS cab w/ A/C, straight gear box, but has removable mount (for transport). blade w/tilt. Single shank, 4-barrel ripper. 24" pads. #123025-Portable Telsmith 48" STD cone w/ 30" Heavy duty apron feeder. Shipping dims: 8' 7" tall U/C (overall approx 70%). Rebuilt engine, trans, feed conveyor w/ 20 HP motor, Dodge TDT5 reduc& 30' long. and finals (HMR 2994) Left Trunnion is available but er, 36" undercrusher conveyor w/ WEG 20HP elec#131022 Hewitt Robbins 48"x20' vibrating grizzly needs to be installed. Overall good condition. tric motor. Cone has 125HP 1150RPM motor, feeder (E-11 mechanism) with hopper. Good condi- #410070-CAT D6R dozer with 10' straight blade mounted on factory tandem axle chassis. Good brakes, very good rubber. Good running cone. with good cutting edge. Has EROPS cab with air. tion.

Jefferson City, MO 65110

www.altaequipment.com

HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391

844-GO2-ALTA 18405 115th Avenue Orland Park, IL 60467 1035 Wylie Drive Bloomington, IL 61705 420 Nolen Drive South Elgin, IL 60177 2500 Westward Drive Spring Grove, IL 60081 613 E Stevenson Road Ottawa, IL 61350 26354 N US Hwy 12 Wauconda, IL 60084 480 Blaine Street Gary, IN 46406

Page 40 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2841 Verona Rd • Verona, KY 41092 859-485-8500 • Fax: 859-485-8573 www.newmantractor.com

11745-R Lackland Road • St. Louis, MO 63146 314-427-4911 www.cpower.com

3905 Country Rd WW • Wausau, WI 54401 715-362-4977 www.scandforestry.com

HBS’s Telematics Integration With Kubota Bolsters Support HBS Systems, a provider of web-based equipment dealership management solutions and rental software, announced an advanced telematics integration with Kubota. This telematics integration will strengthen the support NetView ECO provides to Kubota dealerships throughout North America, according to the companies. The benefits Kubota dealers can expect include: • Track unit location for dealer and customer-owned fleets. • Geo-fence job sites to receive notifications, minimize theft and watch for potential misuse. • Monitor unit meters and usage time for preventative maintenance, cost savings and rental contract accuracy. • Increase service efficiency and customer satisfaction by receiving fault codes that expedite work orders within NetView ECO. • Manage from one customizable screen through NetView ECO’s Service Connect, accessible from anywhere on any device. “We’re connecting dealers with customers and their machines with new technology to improve dealership productivity and reduce

“We’re connecting dealers with customers and their machines…” Chad Stone HBS Systems

machine downtime on the job-site or in the field which helps increase customer satisfaction,” said HBS Systems President and CEO Chad Stone. “Our development team is consistently providing first-to-market technology and benefits not found in the industry. The telematics integration with Kubota allows dealers to monitor machine health as well as receive alerts about any machine issues or potential problems. Dealers can proactively order parts or send a service technician right to the customer’s location and more.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 41

IN YOU OUR WORLD,

BIG JO OBS NEED BIG MACHINES. E Expect big things from f the John Deere 850L Do ozer. Larger and more powerful than the previous K-Series m model, the 850L gives you 10-ppercent more horsepower andd 23-percent more torque for mass eaarthmoving. And with state-off-the-art controls, the usual D Deere arsenal of production-boosting hydrostatic advantages, a SmartGrade™ fully integratedd grade-control option, p and the choice of a Power-Angle-Tilt g (PA AT) or o Outside Dozer (OSD) blaade, yyou’ll have the precision and performance you need to Run Y Your our World. W Stop by or call us today.

mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700 Sparta,WI COMING SOON

www.westsidetractorsales.com Lisle, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677

Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160

Page 42 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Midwest Alta Equipment altaequipment.com Bloomington, IL 309-808-6256 Orland Park, IL 708-349-8430 Ottawa, IL 815-324-6062 South Elgin, IL 630-883-3320 Spring Grove, IL 815-581-8064 Wauconda, IL 847-469-0120 Buck & Knobby Equip Co. buckandknobby.com Ottawa Lake, MI 734-856-2811 CSTK cstkequipment.com Kansas City, KS 888-566-5743 Diamond Equip diamondequipment.com Mt. Vernon, IL 618-242-2273 Evansville, IN 812-425-4428 Terre Haute, IN 812-299-4747 Bowling Green, KY 270-781-1061 Farm Depot farmdepot.biz Caro, MI 989-673-6172 Ionia, MI 616-522-5501 Schoolcraft, MI 269-679-3939 G W Van Keppel vankeppel.com St. Louis, MO 314-872-8440 Hardings Heavy Equip hardingsinc.com Lowell, IN 219.696.8911 Hayden Machinery LLC haydenmachineryllc.com Springfield, MO 417-855-7057

hceamericas.com

Highway Equip Co. highway-equipment.com Canton, OH 330-915-8391 J Gross Equip Inc. jgeinc.com Aberdeen, SD 605-229-4037 Midland Engine midlandengine.com Midland, MI 989-631-4608 Reco Equip, Inc. recoequip.com Columbus, OH 614-276-0001 Ft. Wayne, IN 260-255-3115 Monroe (Dayton Area), OH 513-539-5255 Perrysburg (Toledo Area), OH 419-874-6001 Richfield, OH 330-659-0800 Florence, KY 859-727-7970 Indianapolis, IN 317-781-8100 Rueter’s rueterco.com Council Bluffs, IA 712-366-5221 Grand Junction, IA 515-738-2571 Carroll, IA 712-792-9294 Elkhart, IA 515-367-3054 Osceola, IA 641-223-8171 Sioux City, IA 712-266-3832 Neligh, NE 402-917-5604

St. Joseph Equipment, Inc. stjosephequipment.com La Crosse, WI 608-788-1775 Eyota, MN 507-545-2000 Team Boone teamboone.net Bardstown, KY 502-369-2475 United Truck Sales (Compact Excavator Only)

utsmi.com Clinton Township, MI 586-630-0355 West River Equipment westriverequipment.com Mandan, ND 701-751-0995 Yes Equip & Services yesequipment.com Milwaukee, WI 414-263-9001 Madison, WI 608-243-9253

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 43

READY TO OUT-WEIGH THE COMPETITION

Hyundai wheel loaders come standard with an auto-weighing system that weighs accurately to within plus or minus 1%. With better payload management, you can operate more efficiently and maximize profitability.

hceamericas.com

Page 44 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ASV Holdings’ OEM Maintenance Kits Provide Convenient, All-In-One Solution ASV Holdings Inc., a manufacturer of all-purpose and all-season compact track loaders and skid steers, introduced maintenance kits for simple and convenient ASV machine parts purchasing and maintenance. The kits include replacement filters for service intervals. All parts included are OEM. “We want our customers to have the best performance from their machines,” said Buck Storlie, ASV product line manager. “These kits make it easy and convenient for them to achieve that through proper upkeep combined with OEM parts designed to keep the machine simplicity of having all of the required filters in one package speeds up performing long term while The regular maintenance tasks and allows operators to get to work sooner. avoiding costly repairs.” The ASV maintenance kits include hydraulic filter(s), an engine oil filter, fuel filter(s) allow operators to do more work in more places. “Whether you’re a contractor completing a job or a and air filters. The packaged kits remove the guesswork from the process of replacing filters by including all required com- landowner tending your property, you don’t want to waste ponents in one package. This simplicity speeds up regular time hunting down the proper filters for your machine. With maintenance tasks and allows operators to get to work soon- the kits, you have everything you need in one place. Just er. Additionally, the kits include labeling with instructions for open the box and go,” Storlie said. “Plus, the added convenASV’s ELITE line of high-performance, heavy-duty lubri- ience means you’re less likely to procrastinate your filter cants. The engine oil, hydraulic oil and grease products are changes, helping ensure the long-term health of your extensively tested for use in optimizing ASV equipment and machine.” ASV maintenance kits are available through ASV’s dealer network. They are compatible with all current machines as well as many older models. For more information, visit www.asvi.com. 

KOBELCO-USA.COM

Mid Country Machinery 3478 5th Ave S Fort Dodge, IA 50501 800-206-5936

Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303

4734 Sergeant Road Waterloo, IA 50701 319-234-8710

1356 3rd Street Brilliant, OH 43913 740-598-3400

106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073

3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479

DeForest, WI 608-222-9191

8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Eau Claire, WI 715-832-3443

404 Breaden Rd. Monroe, OH 45050 513-539-9214

De Pere, WI 920-338-5800 Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

The ASV maintenance kits include hydraulic filter(s), an engine oil filter, fuel filter(s) and air filters. The packaged kits remove the guesswork from the process of replacing filters by including all required components in one package.

1500 Industrial Parkway Brunswick, OH 44212 330-225-6511

228 SR 7 North Gallipolis, OH 45631 740-446-3910

Ronson Equipment Co, LLC

The maintenance kits include replacement filters for service intervals. All parts included are OEM.

Southeastern Equipment Co., Inc.

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 45

Dig More. r BUILD D MOR O E. DO MORE.

EXPECT MORE FROM YOUR EXCAV C VATO T R. Pbma ehZ]l h_ ihp^k% bg]nlmkr&e^Z]bg` _nê ^\hghfr Zg] ^q\enlbo^ _^Zmnk^l rhn phg m Ûg] anywhere else, KOBELCO excavators are made to get more done each day than you ever mahnàm ihllb[e^' Ienl% ma^r k^ Zee [Z\d^] [r ma^ l^kob\^ Zg] iZkml lniihkm h_ ma^ DH;>E<H ]^Ze^k g^mphkd' Oblbm rhnk eh\Ze DH;>E<H ]^Ze^k mh Ûg] ma^ fh]ê [nbem mh e^m rhn Do More.

KOBELCO-USA.COM

21-KOBELCO 21 KOBELCO-0642 K 0642 2_N NewDea ewDealer er_Ad1 Ad1_RUN.indd RUN.indd 1

7/7/21 7/21 /21 21 3:16 PM

Company Wrench

Blue Ridge Tractor

Illinois Truck & Equipment Co.

1330 KY-151 Frankfort, KY 40601 502-699-2681 www.companywrench.com

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 46 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 47

REACCH NEW W

HE EIGH T TS IN PRRODUCTTIVI Manitowoc crawler c cranes are built to unsurpassed productivity and value on challenging jobsites. j Manitowoc delivers: d > Cranes ranging from 73 t ((80 USt) U ) to 23 > Capacity-enhancing VPC-MAX X® techno attachmen nts > Optional lo ong-reach booms, fixed jibs, extended u upper boom points > Optional 3..5 m wide boom inser erts for M

man nitowoc.com woc.com

Kirby-Smith Machinery Inc. www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550

6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300

Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757

SECTION

Attachments Pages 48-53

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Bommarito Builds Success By Expanding Services for Clients Joe Bommarito always knew he wanted to be his own boss. Starting a business focused on utilities made sense, considering he grew up helping his dad out with his utility company. “I worked there in the summers and every chance I got to go back and help out,” said Bommarito. “I learned all aspects, starting with doing every job that went with the business. I grew to love it and never really saw myself doing anything else.” Bommarito combined his experience and entrepreneurial spirit to found J.W. Bommarito Construction in 1997, which is more commonly known today as simply Bommarito Construction. The Fenton, Mo., based firm’s early work involved relatively small commercial storm and sanitary sewer jobs, ranging in size from a few thousand dollars to approximately $150,000. “I had 10 guys, and we were doing a lot of maintenance work, such as tearing down and repairing inlets and fixing sewer laterals and mains,” recalled Bommarito. “Here and there, we would get a nice-sized utility job and some bigger work such as putting in large box culverts. We became very efficient and known for our good

work.” Bommarito noticed that his company was often paired with grading contractors during site work projects. He believed that scope of work would be a good way for Bommarito Construction to expand. “It seemed logical to me that if

we could provide both aspects to a customer that it would be to our and their advantage,” said Bommarito. “As before, we started small, but things ramped up fairly quickly. Before long we added installation of fire protection systems, including the hydrants and lines, as well as regular domestic

water lines.”

Joe Bommarito, owner/CEO of Bommarito Construction.

Hunter Henry, vice president/ project manager of Bommarito Construction.

John Gilbert, project superintendent of Bommarito Construction.

Doug Frey, project manager of earthwork/estimator of Bommarito Construction.

Bommarito Construction is using multiple Komatsu excavators, including two PC360LCs, to hammer and move rock for the expansion of a care facility in Eureka, Mo. “Komatsu excavators last, even in tough applications like hammering rock day in and day out,” said Joe Bommarito, owner. “The durability is outstanding. We have run them to 10,000 hours or more without replacing major components. We know we’re not going to have to worry about breakdowns, and when we trade them in, someone else is getting a solid used machine.”

On Time, On Budget Additional services put Bommarito Construction on the path to being a full-service site contractor. Today, it offers everything from clearing and grubbing to finish grading, typically for

commercial and residential developers and general contractors. With a staff of about 120, including nearly 100 in the field, it mainly covers the greater St. Louis metro area. “We are on about 20 different projects daily,” said Bommarito. “In addition, we probably have another 50 jobs on the books that we are in and out of due to phasing. There is no way it would be possible to keep it straight and humming along without a solid group of people, and I certainly have that. Many have been here 15 years or more, and that plays into our long-term success.” Bommarito also credits his staff’s quality work for building a list of repeat customers who rely on Bommarito Construction to handle their site work needs. Key individuals include his brother, Matt, who has been with the company since its inception. “Customers appreciate that we finish on time and on budget,” said Bommarito. “I have to commend our employees for that. We are all driven to provide clients with the best service possible, from project management to completion. I consider them family.” see BOMMARITO page 49

Ryan Meers, project manager of Bommarito Construction.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • July 24, 2021 • Page 49

Epiroc, Tramac Attachments Allow Bommarito Flexibility able, so they can best match the machines and attachments to the task. We don’t have mechanics, so Roland [Machinery] does all our service and repairs. They track the excavators with Komtrax — which we also use to track hours and location — and let us know when it’s time to schedule a visit. It’s seamless.”

BOMMARITO from page 48

Project Showcases Excavator/Breaker Combos During the past two decades, Bommarito Construction has been involved in several high-profile jobs in the St. Louis area, including ones at Kiener Plaza and the St. Louis Zoo. A current undertaking has the company providing site construction for the expansion of a care facility in Eureka that includes 25 new buildings. It started with clearing and removing about 12,000 yds. of topsoil and clay in December. “That was the easy part; rock excavation is the biggest challenge, and there is about 11,000 yards of it that has to be hammered out,” said Hunter Henry, vice president/project manager. “We knew that was going to be the case, and we pushed to do blasting. Because it’s located in a residential area, that was not an option.” Henry, Doug Frey, project manager of earthwork/estimator, and John Gilbert, project superintendent, developed a plan to cut, hammer and excavate the rock as efficiently as possible. They chose to equip some of Bommarito Construction’s Komatsu excavators and rented units from Roland Machinery Company with Epiroc and Tramac drum cutters and breakers. “There was a layer of capstone that we could fairly easily remove with the cutter,” said Gilbert.

(L-R): Joe Bommarito, Bommarito Construction owner/CEO; Hunter Henry, vice president/project manager; and John Gilbert, project superintendent, meet with Craig Ferris, Roland Machinery territory manager and James Jesuit, vice president/general manager. “I can count on Craig and Roland to deliver 100 percent of the time,” said Bommarito. “They are knowledgeable, so they can best match the machines and attachments to the task. We don’t have mechanics, so Roland does all our service and repairs. It’s seamless.”

“After that we hit hard limestone, so hammering became necessary. We have a PC490LC with a breaker that’s hitting at 12,000 pounds and a PC360LC with one that hits at about 7,500 pounds. They are definitely getting the job done.” Both are paired with a second Komatsu excavator, either a PC360LC-11 or a PC210LC-11, that is used to clear and pile the

A Bommarito Construction operator hammers rock with a Komatsu PC490LC-10. The excavator is equipped with a breaker hitting at 12,000 lbs. on the expansion project for a new care facility in Eureka, Mo. Doug Frey, project manager of earthwork/estimator said, “Everything is on schedule now, and the productivity of the excavators/breakers combination has played a big role in that.”

fractured rock as Bommarito Construction operators work to reach subgrade. They used a combination of hammers and the drum cutter to excavate the approximately 10,000 ft. of utility trenches included in the project. Bommarito Construction plans to crush the material and reuse it on site. “We were delayed in getting started because we did some redesign to ensure that there was as little effect as possible on the surrounding neighborhood residents, including giving them more green space between the project and their backyards,” said Frey. “Everything is on schedule now, and the productivity of the excavators/breakers combination has played a big role in that.” Bommarito Construction began using Komatsu excavators in 1999 when Joe Bommarito bought a PC300 from Roland Machinery. After years of use, he sold it, but he kept the panel that had fallen off the machine. His wife cut it up to create a wall hanging for his office. “Komatsu excavators last, even in tough applications like hammering rock day in and day out,” said Bommarito. “The durability is out-

standing. We have run them to 10,000 hours or more without replacing major components. We know we’re not going to have to worry about breakdowns, and when we trade them in, someone else is getting a solid used machine.” He added that service from Roland Machinery also plays a role in continuing to use Komatsu. Bommarito worked with Craig Ferris, territory manager, on his most recent purchases and rentals. “I can count on Craig and Roland [Machinery] to deliver 100 percent of the time,” said Bommarito. “They are knowledge-

Next Logical Step Currently, Bommarito Construction tracks job site progress with consistent drone flyovers. “I can take information gathered from those and put it together to see the quantity of materials that have been moved,” said Ryan Meers, project manager. “The technology gives us an accurate picture of what a site looks like at certain points of its development.” Bommarito plans to use the technology as much as possible, including on new ventures such as the bio-pond maintenance and rebuild projects that Bommarito Construction recently started pursuing. “We are always looking for opportunities to expand in ways that make sense and fit with our core services,” said Bommarito. “For instance, we started a separate company called American Fire about two years ago that’s focused on the installation of fire systems, including interior lines and sprinklers. There is synergy between it and Bommarito Construction. If one company sees a job that the other can do, they can pass it along. It seemed like a logical next step, and it’s been very successful.” This article first appeared in Roland Industry Scoop and was reprinted with permission of Roland Machinery.  CEG

A Bommarito Construction operator piles hammered rock with a PC210LC-11 from Roland Rentals.

Page 50 • July 24, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

Teran Introduces NextGen 36-Ton Excavator Buckets

Sizes and capacities for this line range from the company’s 18-in. banana bucket all the way up to its heavy duty 72-in. bucket (2.62 cu. yd.).

Teran Industries has introduced the next generation of 36ton excavator buckets, designed to meet the needs of new excavators that require greater performance standards and durability from attachments they use. Teran has designed an even stronger attachment class for the “DB Linkage” series that can withstand the demands of all different job types and earth types with which they are used, the company said. “We decided to further improve our product, buttressing our buckets with stronger reinforcement plates and better alloy, allowing more resistance to abrasion and severe impact, providing more steel where its most needed,” the

company said. Sizes and capacities for this line range from the company’s 18-in. banana bucket all the way up to its heavy duty 72-in. bucket (2.62 cu. yd.). For more information, call 305/594-4700, or visit www.teranindustries.com.  Teran has designed an even stronger attachment class for the “DB Linkage” series that can withstand the demands of all different job types and earth types with which they are used, the company said.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • July 24, 2021 • Page 51

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engine eered and ® y that prov p vides safer and feature the Ultralo ok tooth system easier tooth repla acement. Combined with p premium m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

Ultra alok® Tooth o System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades es s™ Cutting Edgess and a Acce essories

General Equipment & Supplies, Inc. www.genequip.com 4300 Main Avenue Fargo, ND 58103 800-437-2924

www.esco.weir

816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399

East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080

Roland Machinery Co. www.rolandmachinery.com Escanaba, MI Columbia, MO 906/786-6920 573/814-0083 Bridgeton, MO Palmyra, MO 314/291-1330 573/769-2056 Cape Girardeau, MO DePere, WI 573/334-5252 920/532-0165

DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710

Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

Page 52 • July 24, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • July 24, 2021 • Page 53

Krypto Klaw Grapple Rake Gives Operators Firm Grip Combine the versatility of the Krypto Klaw with the land clearing abilities of an excavator rake, and you have yourself a Krypto Klaw grapple rake. Choose from two configurations: standard design with a cutting edge or equip with pin-on replaceable teeth of your choice.

This new tool Rockland has added to its attachment arsenal allows operators to get a firm grip on large, bulky materials and debris using 100 percent of their excavator’s reach. The dual cylinder clamp delivers more clamping force in all positions than any bucket thumb, making the Krypto Klaw Grapple Rake a much better alternative to a standard rake and thumb setup, according to the manufacturer. It provides better control and greater

gripping power, plus users can quickly drop the entire attachment when performing tasks that don’t require a clamp. In addition, installation is easy and costs are minimal because there is nothing to weld to the stick. Just pin on or connect with an excavator coupler. Then, connect the hydraulic fittings, and it’s time to get to work. Choose from two configurations: standard design with a cutting edge or equip with pinon replaceable teeth of your choice. Rockland Krypto Klaw Grapple Rakes are made in the USA and backed by a no-nonsense, two year/4,000 hour warranty. For more information, call 800/458-3773 or visit www.rocklandmfg.com. 

PUT MORE ON THE GROUND WITH

LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty

Company Wrench www.companywrench.com Headquarters: 4805 Scooby Lane NW Carroll, OH 43112 740-654-5304 866-262-4181

4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-402-7297

1330 KY-151 Frankfort, KY 40601 502-699-2681 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

Page 54 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

InSite Software Prepares Students for Real-Life Modern Construction Sites InSite Software’s Elevation earthwork take-off and GPS modeling software is now part of the Southern Utah University (SUU) curriculum; its adoption is expected to better prepare students for the modern construction site. The software is now being used in three courses that are taken by students in the university’s Construction Management, Civil Engineering and Engineering Technology programs. InSite Software’s design and features are a fit for the university’s Estimating and Bidding course, which covers three important aspects of estimating and bidding: • Efficient calculations to perform A screenshot of InSite Software’s elevation tool. InSite Software is a quick quantity takeoffs and easy earthworks take-off and modeling solution. • The theory, methods and quantitative tools used to estimate project costs Software to curriculum that began in evant data. September 2020. However, due to the “I found some variances only when effectively • The preparation of accurate bid COVID-19 pandemic, all instruction the students forgot to include some conand learning was completed remotely. tours in their calculations,” said Askar. proposals for construction projects Specifically, students worked in Askar said the use of InSite The software is taught in two other pairs to: Elevation in the classroom has helped courses: Heavy Civil Construction • create a fake construction company, the students to identify, formulate and Design Methods and Equipment, • bid on a fake proposed developquickly and accurately solve applicawhich addresses design practices, ment project, equipment, methods and construction • calculate all the quantities of the tion project problems; communicate management practices employed in work items mentioned in the ITB effectively; and function effectively on heavy civil construction, and the final (intention to bid) letter and on the teams. Last autumn, students from SUU course, Capstone Project, which brings InSite Elevation project drawings, and • prepare the project’s bid form that participated in a construction manageall of the knowledge and work of the ment competition at senior student into a single Brigham Young culminating project. University. The SUU stu“We implement projectdents used InSite softbased learning in our curricuware for take-off the lum and regularly revise the quantities and for bid course syllabi to match the preparation. The sponsor, industry and new technoloheavy civil contractor W. gies by adding more applicaW. Clyde, asked them tions,” said Mohamed Askar, about the software. The CM Program, Department of sponsors were very Engineering and Technology, impressed by the stuSouthern Utah University. dents’ performance and “The university chose InSite knowledge. Software because it is an inteThe courses that teach grated solution of earthwork and civil utility takeoff and A student learns how to use InSite Software at Southern the software are taken by GPS modeling tools.” Utah University. Due to the COVID-19 pandemic, all students in their final year Specifically, it is the soft- learning took place remotely. and the first students to ware’s ability to calculate and use InSite Elevation gradmodel cut and fill, stripping, uated in December. At which time they strata quantities, paving and concrete includes the work items, quantities will enter the labor force and put their materials, topsoil re-spread, areas and (from the software reports), unit price technological skills into use. lengths, trench excavation and backfill, (by using HCSS Heavy Bid and “The software solutions give the stuas well as its construction staking data RSMeans) and total price. dents the tools required to solve heavy and GPS models that were the main Although the InSite Elevation softreasons the Department of Engineering ware is capable of calculating accurate civil project problems with accurate and Technology chose the software. quantities and automation, students and fast figures,” said Askar. “After were asked to perform work manually, implementing the software, the student Creating Real-World so they would have a better understand- learning outcomes have been increased Classroom Experience ing of reading models and selecting rel- and outcomes have been achieved more efficiently.”  The department added InSite

ILLINOIS DIAMOND EQUIPMENT

KENTUCKY DIAMOND EQUIPMENT

www.diamondequipment.com Mt. Vernon 618-242-2273

www.diamondequipment.com Bowling Green 270-781-1061

OHIO CAT INDIANA MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

www.OhioCAT.com Richwood 888-446-4658

WILSON EQUIPMENT COMPANY www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 55

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)

Page 56 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 57

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Roland Machinery Co.

Central Power Systems & Services

www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920

www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Great Bend, KS (816) 781-8070 (620) 792-1361 ALP Air, Light, Power Liberal, KS Liberty, MO (620) 624-7274 (816) 415-6700 Salina, KS Joplin, MO (785) 825-8291 (417) 726-5373 Wichita, KS Maryland Heights, MO (316) 789-7370 (314) 427-4911 Woodward, OK Springfield, MO (580) 256-6014 (417) 865-0505 Yukon, OK (405) 324-2330

MAKE POWER MOVES.

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

Page 58 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KOBELCO SK170LC-10 330 Hrs, for sale on Consignment $150,000

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

Benton, Illinois WWW.BRTRACTOR.COM

John Deere Brings Farm Life Home With New Minecraft Video Game Experience

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

Within the FarmCraft world, players will undertake and complete unique farming missions, including planting and growing crops and then harvesting them.

the industry to a whole new generation of young people.” Available now within the Minecraft Marketplace, FarmCraft provides an added educational benefit of player interaction with an automated

www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

GENERAL EQUIPMENT & SUPPLIES, INC.

618-435-2330

John Deere is bringing the farm to young game enthusiasts with the latest version of FarmCraft, a Minecraft experience. Created by Blockworks, in collaboration with John Deere, the Minecraft experience gives players an introduction to modern agriculture through the virtual use of machines, processes and decisions that go into farming today. The FarmCraft experience, within Minecraft, is intended to educate young people on the importance of agriculture using a familiar, interactive platform. Within the FarmCraft world, players will undertake and complete unique farming missions, including planting and growing crops and then harvesting them. “John Deere places a significant focus on youth education as a means to increase the number of students interested in pursuing college degrees and careers in agriculture,” said Lauren Willis, global manager brand licensing. “Our team sees FarmCraft as a fun and unique way to introduce

ROAD BUILDERS MACHINERY & SUPPLY CO., INC.

researcher who explains the FarmCraft world and scenarios as players explore and complete activities. For more information, visit www.minecraft.net. 

www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 59

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

&RQQHFWHG WR \RXU VXFFHVV 1RZ \RX FDQ VWD\ FRQQHFWHG WR \RXU pHHW DQG \RXU EXVLQHVV q LQVWDQWO\ )URP D FHOO SKRQH ODSWRS WDEOHW VLPSO\ ORJ RQ WR 0\ .RPDWVX \RXU IUHH RQOLQH SRUWDO IRU UHPRWH pHHW PDQDJHPHQW SDUWV RUGHULQJ DQG WUDFNLQJ SDUWV DQG VHUYLFH QHZV DQG RWKHU UHDO WLPH FXVWRPL]HG LQIRUPDWLRQ P\NRPDWVX NRPDWVX

Page 60 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Historic Third Street Bridge Undergoes $129M Renovation BRIDGE from page 1

neering at that time. The Minnesota Department of Transportation (MnDOT) awarded the $129 million contract to Ames Construction of Burnsville, Minn. The project is a collaboration between MnDOT, Ames and the Finley Engineering Group of Tallahassee, Fla. Finley is responsible for managing the load distribution requirements on the bridge deck during the on-going and changing construction dynamics as the project moves forward. Long before aesthetics played a key role in future transportation design, government leaders in the early 20th century wanted this bridge to visually stand out, according to the MnDOT project web site. This requirement led them to choose Melan, who came up with the concept of the reinforced concrete arch. It is notable because the arch is made up of molded steel Ibeam arches covered with reinforced concrete. It is one of the first reinforced concrete arch bridges in the Twin Cities of St. Paul and Minneapolis to reflect this design. The bridge deck is supported by spandrel columns through the first and fifth spans and spandrel walls

through the sixth and seventh spans. Engineers placed barrel aches at the north end of the bridge because the spans are shorter, which required a tighter radius, explained Tim Nelson, MnDOT project manager. Piers one, six and eight are framed by circular overlooks on each side of the bridge. When the bridge reopens in November 2022, it will be ready for another 50 years of service and feature refurbished decorative railings and lighting; a 13-ft.-6-in. shared use bicycle and pedestrian path; and four, 10-ft.-10-in. traffic lanes. Roughly one million lbs. of rebar; 12,000 cu. yds. of concrete; 2.2 million lbs. of epoxy rebar; and 550 tons of asphalt will go into the bridge improvements. Ames will mobilize a variety of heavy equipment and cranes — including Manitowoc and Grove cranes — and Cat excavators to bring this bridge rehabilitation to completion. Though repairs have been done on this bridge over the years, the 100-year-old structure was at a point where deteriorating elements of the superstructure and scaling around the piers at the water line required repair to avoid placing

future weight restrictions on its road deck. Limited in the scope of the work that could be done on this bridge because of its historic status and the fact that those early engineers designed a bridge so sound, MnDOT determined that a complete make-over of the bridge was the best route to go, Nelson said. Along with the graceful look of the arches, at 2,223 ft., it also is visually notable because of its reverse “S” curve forming a graceful alignment imposed by challenging foundation conditions

because of its location just upstream from St. Anthony Falls. According to the MnDOT web site, Frederick Cappelen, educated in Sweden and Germany, was the chief city engineer at the time. Cappelen understood that the riverbed geology at the falls contained dangerous breaks in the limestone. To avoid these breaks, which could cause catastrophic loss of the falls and future bridge, Cappelen designed the foundations around these breaks to create the reverse, “S” curve alignment. Over the next two years, crews

Because of very tight site conditions caused by two sets of falls at the bridge, every piece of equipment had to be trucked into the project site.

Pier jacket repair is part of the Third Avenue bridge rehab. This work began a year ago while the bridge was still open to traffic.

will turn this bridge inside out to methodically and painstakingly demo and rebuild every element from the Melan arches up to the road deck. Details include building cofferdams for access below the water line to repair the piers; removing and rebuilding the spandrel columns and walls; and removing and rebuilding the bridge deck and decorative railings. There will be some concrete repair on the surfaces of the arches throughout the length of the bridge. This is a project that faces a tight deadline and very challenging site conditions severely limiting equipment access and hampered by no free space on the river banks for lay down areas. The bridge is tightly hemmed in

between the St. Anthony Falls Lock and Dam, which was decommissioned in 2015 by the Army Corps of Engineers, and a structure referred to as the Horseshoe Dam used to generate power. This led to the biggest challenge of this project. Because of the site conditions imposed by the set of dams on either side of the bridge, Ames Construction relied on every piece of equipment and material to be trucked to the site, including the barges and small tug boat. “Mobilizing large pieces of heavy equipment on large barges below the bridge was impossible at this site because of the tight restrictions caused by the two sets of falls,” said John Schmitz, Ames Construction project manager. “We could not rely on our river equipment. On many projects like this, you can access the whole bridge from down below. Here, we can’t do that through large sections of the bridge. Essentially, we need to build in a ‘top down’ approach and not rely on our river equipment to provide assistance for anything other than the cofferdam and pier jacket work.” This led to a several-year effort between MnDOT and Ames Construction to come up with a complex construction sequencing plan as the three-year project moves forward. To put it as simply as possible, “we have a couple of sequences. Generally, each span is taken individually either in a full width and build it back to full width or a partial width where we do the upstream or western third roughly. We’ll take it off and rebuild it back. In that case, we put a temporary bridge over that span so we can access and cross it while we do the other side of the span,” Schmitz said. This project is under a challenging schedule, which also drives the construction and loading sequences, Schmitz said. “We have roughly 22 months to tear it apart and build it back. Access becomes such a huge factor on a short schedule because we’ll be working in multiple areas. It’s a combination of full width or partial removals and rebuilds while maintaining access to get removals off the bridge, pour new concrete, get concrete in and out and also mainsee BRIDGE page 78

Trucks & Trailers

SECTION

Pages 61-69

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Bauer Built, Fendt Keep Valley Corp. Running Smoothly Valley Corp., a third-generation general contracting company in Valley, Neb., was awarded the contract to build a new 8-mi. U.S. 30 from Rogers to Fremont, Neb. The Nebraska Department of Transportation project aims to move the existing highway — which currently runs through the south part of North Bend, Neb. — north of the city. The project began April 15, 2021, and is due to complete June 1, 2022. The new four-lane highway that will bypass the town of Fremont presented a few challenges for Valley Corp. The first was how to move 1.5 million cu. yds. of dirt to the project location — a 3-mi. drive — over soft, uneven ground. Usually, articulated trucks or semitrailers with side or belly dumps would be used while equipment crews with graders, dozers and track machines smooth out ruts and try to level travel ground. This process slows down the movement of material to the needed job project area. Traditional trucks and trailer combinations also have speed limitations on uneven ground; can produce lots of rutting; and carry less product. Al Hagemann, COO of Valley Corp., and Matt Bevington, CEO of Valley Corp., turned to their friends at Mid Country Machinery for advice. Mark Swedlund, partner of Mid Country and Andy Smith, sales representative, had just the solution: the Bauer Built SD-36 side dump trailer. The SD-36 has a heaped capac-

ON THE JOB

(L-R) are Dave Almery, job superintendent, Valley Corp.; Malakie Cramer, operator, Valley Corp.; Frank Vech, salesman of Butler Ag Equipment; Al Hagemann, COO of Valley Corp.; Matt Bevington, president of Valley Corp.; Andy Smith, Mid Country territory salesman; and Mark Swedlund, Mid Country partner/side dump manager.

Valley was loading the trailers with a Komatsu PC 490 from Road Builders of Kansas City, Mo. The tractor and trailers were going so fast that the excavator crew was working nonstop, filling as fast as they could due to the high travel speed of the tractor trailer combo.

EVERY DAY!

ity equal to that of a 40-ton haul truck. A 3-axle hydraulic suspension system allows floatation to suppress ground compaction. Six 750/45R26.5 tires on 50K rated hubs and spindles and rear selfsteering axle makes for ease of operation and durability. The hydraulics also transfer weight to all six tires all the time, even when dumping on the go, thus giving it stability while dumping and equal flotation to all six tires, to increase flotation. All that was needed was the power to pull the fully-loaded trailers. see VALLEY page 64

Ove er a CENTUR U Y of bu uilding the h ver e y best heavy-dut y ttrailer a s for o yo our hauling needs!

www.rogerstraile ers.com m

or morre information or your clo osest dealer call :

80 00-441-9880

Page 62 • July 24, 2021 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

www.jeffbelzerchevy.com

JARRET PETSCH 952-469-7063 JPETSCH@JEFFBELZER.COM Lakeville, MN 55044

JOHN ZADURSKI 952-469-6818 JZADURSKI@JEFFBELZER.COM Lakeville, MN 55044

OFFERS

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • July 24, 2021 • Page 63

NO OT ALL T TRAILERS S ARE BU UILT THE E SAME SOM ME ARE STRO ONGER THAN N OTHERS

Our ttrrailers start out tough gh and stay tough so th heyy can safelyy haul yyour equipment q p day after t day, yearr after year. Learn more: towmaster ster.com/more .

Hyd Dump D Drop-De eck

Tilt-Deck

Lowboy

Hyd draulic Tail a

AMER RICA A’S ’S BEST B BUIL LT T TRAILE TRAILERS ERS FOR R PROFESSIONAL HAULER RS

M MORE MODELS • MORE OPTIONS PTIONS • MORE CHOICES

Call 800-462 2-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH

Farm-Rite Equipment Inc. www.farmriteequip.com Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857

St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085

Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672

Diamond Equipment, Inc. www.diamondequipment.com

McCann Industries, Inc.

Alta Equipment Company

www.McCannOnline.com

www.altaequipment.com

Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000

Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800

Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770

Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800

Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200

Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545

Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110

Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444

McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420

Marne 1064 Franklin Street Marne, MI 49435 616-371-7250

Bryon Center, MI 616-878-7450

Gaylord, MI 989-731-9988

New Hudson, MI 248-356-5200

Sterling Heights, MI 568-474-5063

Traverse City, MI 231-714-6210

Bloomington, IL 309-585-3800

Detroit, MI 313-394-1811

Spring Grove, IL 708-547-7300

Flint (Burton), MI 810-744-4840

Ottawa, IL 815-313-2070

Company Wrench www.companywrench.com

Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428

Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061

2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747

Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100

Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273

Ziegler CAT www.zieglercat.com 8000 County Road 101 East Shakopee, MN 55379 800-352-2812

1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002

13822 West Freeway Drive Columbus, MN 55038 866-982-5656

53 Harbor Drive Sioux City, IA 51111 800-342-1847

2225 255th Street St. Cloud, MN 56301 800-522-9469

4805 Scooby Lane Carroll, OH 43112 866-294-6103

16400 Brookpark Rd. Cleveland, OH 44135 866-294-6103

1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

920 Deneen Ave. Monroe (Cincinnati), OH 45050 866-294-6103

1330 KY-151 Frankfort, KY 40601 502-699-2681

Page 64 • July 24, 2021 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Tractor/Trailer Combination Solves Valley’s Challenge

New manufactured drawbar installed.

Malakie Cramer, operator, Valley Corp., is set to take the next load.

VALLEY from page 61

50 to 18 — men and women — who are able to operate the equipment combination with ease,” said Hagemann. “The design is very intuitive, has a comfortable cabin environment and seamless integration to the trailer controls. We can show anyone how to operate this equipment. The equipment has CVT transmissions and no grease points. Maintenance has been minimal.” Another challenge came when the hitch connections started to fail under the extreme conditions. “We had the perfect setup and the standard Fendt drawbar was straining under the speed and uneven conditions. Mid Country sent Adam Hanson, who originally designed the first side-dump trailer, right to the job site to look over the situation. After his evaluation, new extreme-duty hitches were delivered in 48 hours. Six more hitches were delivered in two weeks.” Bevington said this was a very impressive turnaround. “They came out right away and looked over the issues. The next thing I know, they had gone back, designed a new extreme-duty hitch and delivered back to us in 48 hours. To say I was impressed is an understatement,” he said. With the new hitches in place, the earth was again flying fast and furious. Valley was loading the trailers

Butler Ag Equipment, located at 2831 County Rd. 20 Ave., Fremont, Neb., was founded in 1955 and is now run by its third generation. Butler added the final part of the solution: a large Fendt 1046 460 hp tractor. The tractor has large tires and the horsepower needed to haul trailers filled with earth. It is designed as a high-performance, fixed-frame tractor that brings together every advantage on the field and on the road, according to the manufacturer. It was now time to test this combination. At the Valley Corp. proving grounds — located near the shop —Hagemann and Bevington were able to see the impressive machines in action. “The floatation, speed, power and high capacity was nothing like I have ever seen — The rutting and grade disruption were substantially less than if we had used traditional methods,” said Bevington. “We did not have to keep multiple machines on cleanup and leveling duty in the soft soil conditions like we normally would. This was a game changer.” The biggest surprise was that they could make the 3-mi. loop in just minutes, slowing down and being able to discharge a full load without stopping. Another positive surprise was the ease of use. “We have a variety of operators ranging in age from

The Bauer Built SD-36 side dump trailer has a heaped capacity equal to that of a 40-haul truck. A 3-axle hydraulic suspension system, allows floatation to suppress ground compaction.

(L-R): Matt Bevington, president of Valley Corp.; Al Hagemann, COO of Valley Corp.; and Dave Almery, job superintendent, Valley Corp., are ready to see what the new machines can do.

Adam Hansen, Eagle Acres CEO, is shown with the new manufactured drawbar assembly that replaced the standard hitch option. This piece allows for heavier load carrying capabilities and less hitch slap to improve trailer handling.

see VALLEY page 68

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • July 24, 2021 • Page 65

Pittsburgh, PA Lancaster, PA Hubbard, OH Cincinnati, OH

(412) 747-7777 (717) 569-4531 (330) 534-0082 (513) 874-4880

Daily RENTALS & Long-Term LEASING! (412) 747-7777

New & Used Trailer Sales • Rental / Leasing • Financing • Service • Parts

• 140 — 2015 Reitnouer 48'x102" Maxmiser Flatbeds $25,950 (In Stock) MECHANICAL DETACHABLES Unit # 4644

Qty 4 - New Eager Beaver Pavers, 35 GSL-PT Hydraulic Detachable Lowboys, 35-Ton, 24’ Deck, Air Ride.

Unit # 4641

Qty 1 - New 35 GSL-BR, 35-Ton, 24’ Deck, Beaver Tail.

2016 XL Specialized 35-Ton, 29’ in Well. 2012 Trail King 35-Ton, 29’ in Well. (Pictured)

*XL SPECIALIZED MINI-DECKS* Qty 4 – New 53’x102” 40-Ton Minideck, Hydraulic Classic Neck, 33’7” Clear Deck, 12” Loaded Deck Height, Accepts Both Flip Box and Flip Axle, Both Narrow Neck (Pictured) and Full Width Necks Available. ALL Tri-State Locations

FONTAINE DOUBLE DROP EXTENDABLES

Spec’s/ Features: • • • • •

2014 Fontaine LXTN-Extendable 29’-50’ in Well, 2014 Fontaine Flip Axle. Unit #’s 4451 & 4452

Qty 2 – New Fontaine LXT-40, 53’-74’x102”, 34’ Well - Closed, 60’ Well - Open, 40-Ton, Mechanical Detach. (Pictured)

ONLY

9,300lb +/-

48’x102” Front Axle Lift Aluminum Wheels LP22.5 Tires Winch Track on Both Sides of the Trailer • +HQGULFNVRQ 7LUH ,QÀ DWLRQ System

Qty 2 – New 53’x102” 25-Ton LOW CAMBER Minidecks, Hydraulic Classic Neck with Full Width Top Deck, 33’7” Clear Deck, 12” Loaded Deck Height, Pony Motor, Accepts Flip Axle.

MATCHED GROUP

Qty 14 - 2018 & 2019 Fontaine 48’x102” Steel Flats, Spring Slider, Winch Track. Unit #’s 4625-4638

Qty 1 – New Fontaine LXTN-40, 50’-71’x102”, 29’ Well - Closed, 50’ Well - Open, 40-Ton, Hydraulic Detach. Qty 1 – New Fontaine 55MXT, 55’-76’x102”, 29’ Well – Closed, 50’ Well - Open, 55-Ton, Hydraulic Detach. Qty 1 – New XL Specialized 45-Ton, Single Drop Stretch, 30” Deck Height, Deck 42’ Closed/65’4” Open.

2018 Fontaine Magnitude 55L Plus, 26’ in the Well, 18” Deck Height. Unit # 4234 2013 Entyre 55-Ton Paver, 24’ in the Well. (Not Pictured) Unit # 4536 2019 Manac Extendable 48’-80’x102”. Unit # 4411

2013 Sunbelt Pole Trailer, 48’/65’x102”, S/R. Unit# 4031

ip s Fl oxe e v B Ha Flip e W s& le Ax

2014 Talbert 51-Ton, 25’ in Well. (Not Pictured)

Unit # 4502

2017 Talbert 55-Ton, 25’6” in Well. (Not Pictured)

Unit # 4609

2012 Trail King 55-Ton, 26’ in Well w/2020 Trail King Flip Axle. (Not Pictured) Unit #’s 4605 & 4606

55-Ton 15” Deck Height Qty 8 – New XL Specialized 55-Ton Hydraulic Detachable Lowboys, 15” Deck Height, 26’ Deck, Rear Lift Axle, Available w/Both Standard and Hydraulic Flip Axles. Red, Black and Galvanized in Stock.

NEW MANAC S-T-R-E-T-C-H FLATBEDS

Qty 6 – New Fontaine Workhorse 55LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Rear Lift Axle, Some w/ Wheel Covers. Qty 1 – New Fontaine Magnitude 55-Ton Drop Side Rail, Rear Lift Axle, o/s Alum Wheels. Qty 1 – New Fontaine Magnitude 60LCC, 18” Deck Height, 26’ Well, o/s Alum Wheels, Front Ramps, Rear Lift Axle.

Qty 1 – New Fontaine EQI Hydraulic Spreader. Qty 1 – New Fontaine Magnitude 60-Ton Beam Trailer, 28’ Beam, Modular Connection at Rear. Qty 1 – New Fontaine 55-Ton Paver, 24’ Well.

EAGER BEAVER TAGS Qty 6 – New 20XPT, 20-Ton, 21’ Flat Deck, Air Brakes with Spring Ramps (Qty 2 – with Hydraulic Ramps). Qty 1 – New 25XPL, 25-Ton with Hydraulic Ramps.

Qty 7 - 48’-80’x102”, Air Slider & Spring Slider. All with Winch Track and Galvanized Winches.

We Rent & Lease all types of Hydraulic Detachable’s, Drop-decks, Flatbeds, Sliding Axles, Extendable (flatbeds & double drops) Dry Freight Vans and more!

Page 66 • July 24, 2021 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • July 24, 2021 • Page 67

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

New Heavy Duty Side Dump Trailer by Bauer Built Mfg. Now Exclusivley Available at Mid Country Machinery

BAUER SIDE DUMP FEATURES: • Hitch-style option: either AG (shown) or Gooseneck • 360-degree rollover hitch • Two trunnion pivot cylinders • Option to dump left or right side • Equal-displacement hydraulic suspension • All six hydraulic drum brakes

• Self-steer rear axle • Triple-axle design • Hydraulic jack • 40 ton/36 cubic yard capacity • 50k lb. rated hub and spindle (x6) • 750/45R26.5 floater tires

Page 68 • July 24, 2021 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Felling Enhances Fender Design for Ground-Level Loading EZ-Tilt Trailers Felling Trailers has released an enhanced fender design rear) which hold the lid/top closed while the trailer is in the for its ground-level loading, EZ-Tilt trailers. transport position and during transit. Additionally, these The new EZ-Tilt fender design offers a similar profile to springs aid in closing the fender when returning the trailer to Felling’s drop deck equipment trailer fenders, opening from the transport position. the top to allow clearance for the wheels when the trailers in • Rubber Bumpers — The lid/top of the fender rests on lowered to the loading position. The mechanism for lifting shock-absorbing rubber bumpers that cushion the lid/top and the top of the fender is the wheels/tires themselves. reduce vibration during transit. As the axles (rotating torsion axles) rotate, lowering the For more information, call 800/245-2809 or visit tilt bed to the ground, the wheels/tires push up against the top www.felling.com.  of the fender, lifting it and providing the needed clearance. The main body of the fender is constructed out of a heavy gauge material to maintain the structural integrity throughout the trailer’s life. Key Design Features: • Sleek Profile — The fenders’ lid/top is attached to the fender body using a series of hinges, concealed and protected inside the fender, maintaining a The new sleek profile. EZ-Tilt fender • Dual Spring design offers a similar profile to Felling’s drop deck equipment trailer fenders, Action — Each fender opening from the top to allow clearance for the wheels is equipped with two when the trailers in lowered to the loading position. springs (one front and one

Valley Corp. Saves Time, Money On North Bend Project With Bauer, Fendt VALLEY from page 64

with a Komatsu PC 490 from Road Builders of Kansas City, Mo. The tractor and trailers were going so fast that the excavator crew was working nonstop, filling as fast as they could due to the high travel speed of the tractor trailer combo. A set of John Deere dozers from Murphy Tractor leveled out the dumped new road material and smoothed out the area where the product was being removed from. “This project is moving forward at a speed that has not

been seen in conditions like these. We are not limited by wet weather, soft ground conditions, bad access roads or bad grades,” said Hagemann. “We can handle any extreme project conditions that may exist. This sets us apart and makes us primed to be able to be the go-to contractor in our area for any difficult project conditions.” (All photographs in this article are Copyright 2021 Construction Equipment Guide. All Rights Reserved.)  CEG

(L-R) are Matt Bevington, president of Valley Corp.; Al Hagemann, COO of Valley Corp.; Dave Almery, job superintendent, Valley Corp.; Andy Smith, Mid Country territory salesman; Frank Vech, salesman of Butler Ag Equipment; and Mark Swedlund, Mid Country partner/side dump manager.

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700 455 West Ave. North West Salem, WI 54669 608-786-2644

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • July 24, 2021 • Page 69

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

)LQG 8V DW %RRWK

)7 /3 ZLWK :RRG ,QODLG $LU 5DPSV

)7 7$ $LU 7LOW ZLWK $LU 5DPSV

)7 /3 ZLWK $LU 5DPSV

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551

3300 Ogden Ave. Lisle, IL 60532 630-355-7150

www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362

600 Walnut Ct Rockdale, IL 60436 815-730-9011

3021 South 460 East Lafayette, IN 47905 765-477-6933

3110 Prairie Rd. Rockford, IL 61102 815-961-3160

1095 N Curry Pike Bloomington, IN 47404 812-333-9677

25166 State Road 2 South Bend, IN 46619 574-232-1461

3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576

3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160

Page 70 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Not All OSHA-Approved Helmets Equal HATS from page 1

Once you’ve chosen the right helmet for the job, it must be fitted properly, inspected regularly and replaced when it becomes damaged, according to OSHA. A hard hat must resist penetration by falling or stationary objects, absorb shock from a blow to the head and be water-resistant and slow to burn. When hard-hat safety is not required on a job site, a bump cap may be worn to prevent minor bumps that can lead to bruises, cuts or abrasions, according to Safety by Design. However, bump caps are not approved by OSHA or ANSI because they do not protect against falling objects. And they are never appropriate for workplaces that require hard hat protection. Hard hats must fit properly to do their job of protecting the head. The suspension, the adjustable head harness, keeps the helmet shell in place. “A firm and snug fit ensures the helmet stays in place when confronted with various work conditions,” said Jill Novak, e-commerce specialist of Orr Safety, Louisville, Ky. Meeting Safety Standards The inside of a hard hat that meets requirements should clearly display the manufacturer’s name; ANSI standard, type and class; size; and date of manufacture. According to Safety by Design, certain types and classes of helmet will display guiding arrows, an “LT” (low temperature) mark, and an “HV” (high visibility) description. The safety consulting company noted that OSHA-compliant hard hats are required in the following situations: • if objects may fall from overhead and potentially strike employees; • if there are stationary fixtures, such as beams and pipes, on which employees may bump their heads; or • if electrical hazards exist and accidental head contact is a risk; A hard hat meets OSHA’s requirements when: • It is the proper type and class (ANSI) for specific hazardous conditions; • Its design performs against impact, penetration, and electrical shock; and • It has undergone testing requirements to ensure its compliance. “Beyond manufacturers’ routine testing, employers should also verify that hard hats are fully compliant,” noted Safety by Design. ANSI logs two types of hard hats and three classes based on the varying levels of electrical hazard. Safety helmets must meet one of the two types. Type I provides protection to the top of the

head, while Type II protects both the top and the sides of the head. Class G covers general hard hats rated for 2,200 volts. Class E are electrical hard hats rated for 20,000 volts, and Class C includes conductive hard hats that do not offer electrical protection at all. Over the past few years the climbing, biking style helmet with chinstraps, considered a game-changer in helmet design, have increased in popularity on the construction site. And, ohsonline.com reports that a number of large companies have added helmets designed with chinstraps to provide more lateral protection to their head protection offerings. This new type of head protection won’t fall off if a worker trips or falls, according to Samantha Heim, writing for the occupational health and safety website. Two popular helmets are the cap style and full brim style. Heim noted that “some hard hats can accommodate accessories as well, such as shields and visors, headlamp mounts, ear protection, neck protectors and more.”

There are also various options in the design of the suspension. Today, four-, sixor eight-point suspensions are available. “Similarly, there are three adjustable forms: the ratchet, pin lock and one-touch,” wrote Heim. “Often, a variety of colors and high-visibility options are offered for more personalization.” When to Hang Up Your Hat OSHA advises replacing a hard hat that shows cracks, dents, penetration or wear from rough care and treatment. The agency has not set a hard hat expiration date, but most manufacturers replace hard hats every five years. They replace the support strap annually. Safety by Design reminds that every time hard hats are used, they must then be inspected for any damage that may render them ineffective and non-compliant. “Beyond a visual inspection, hard hats should be squeezed with two hands, applying force,” stressed the safety consultant. “If squeaking or unusual sounds are detected, it

OSHA advises replacing a hard hat that shows cracks, dents, penetration or wear from rough care and treatment. Most manufacturers replace hard hats every five years, and support straps annually.

is time for a replacement.” Helmet shells are designed to be shock absorbent, yet the material properties used to protect workers also can be sensitive to chemical attack, according to agg-net.com. “More than half of workers mark or apply decals and labels to their helmet, unknowingly decreasing its durability by comprosee HATS page 78

Hard hats prevent injury, but not all OSHA-approved hard hats are the same, and none of them lasts forever.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 71

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

14-15 AP

Reynolds 17CS Scraper, Rebuilt hyd cylinders, all new hoses, fresh paint, new tires, pins & bushings are tight, new cutting bit $29,500 OBO Negotiable 14-15 AP

Eversman 2400 Land Plane, Rebuilt hydraulic cylinders, new hoses, new tires, fresh paint, pins & bushings are tight, very well kept and above avarage condition ..........$12,000 OBO Negotiable

2015 Link-Belt 210 x 3, Enclosed ROPS, Cab w/ Heat & A/C, 160 Hp T4i Isuzu diesel, Manual Thumb, 32’’ Wide tracks.............................$96,000

2020 New Holland L220, Cab w/ Heat & A/C, Enclosed ROPS, 67 Hp FT4 diesel, Air Ride Seat, 263 hours ...................................................$35,010

2019 Hitachi ZW120-6, Enclosed ROPS, 101 Hp Deutz, 4 WD, 2.0 cy Performance GP Bucket, 695 hours...........................................................$89,900

2017 Kubota SVL95-2S, Enclosed ROPS, Cab w/ Heat & A/C, 96 Hp Kubota Diesel, 75’’ GP bucket, 2,180 hours ................................................$45,000

14-15 JM

1974 Heavy Haul Trailer 60-Ton, Quad axle trailer, tandem jeep, new air hoses, fresh paint, 108” wide, 19’6” deck ....$42,000 OBO Negotiable Call or Text Mike at 319-470-8388

Call Steve 262-373-2151

Call or Text Mike at 319-470-8388

Call Steve 262-373-2151

Call or Text Mike at 319-470-8388

Call Steve 262-373-2151

14-15 AP

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

Call Steve 262-373-2151

2015 Leeboy 8500C, s/n 122257, 2750 Hrs, Paving Width 8’-15’, Heated Screed, Legend Screed System ............................................$54,900 15 JM Call Steve @ 630-878-8765

2018 Carlson CP130, s/n 109DB8P, 520 Hours, Contractor deluxe package.......................$179,900 call Steve @ 630-878-8765 15 JM

2014 Ditch Witch SK755, 1400 Hrs, wide tracks, 32.5 hp turbo engine, pressure relief hyd. couplers, 44” dirt bucket..............................................$22,400 Call Jeff @ 630-665-5600 15 JM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 15-16 EB

2015 Grove GHC 55 Tele Crawler, 55 Ton, 100’ Main Boom + jib Aux Hoist, Certified 2500 Hrs, original owner, Cleveland, Ohio.....................CALL Call Andy Forepaugh 216-316-1511 15-16 EB

2014 Manitowoc 8000 80 Ton Crawler, Request Boom Jib Combination Certified, Cleveland, Ohio ... .......................................................................CALL Call Andy Forepaugh 216-316-1511 15-16 EB

2017 New Holland C232, 2 Speed, Open ROPS, EH Controls, Block Heater, Turn Signals, 78” Low Profile Bucket with Bolt on Edge dwietbrock@ronsonequipment.com 15 JM

2007 Hyundai R320LC-7A, 0% for 36 Mos Available, Heat, AC, 13’3” Arm, 36” Grouser Pads, Pattern Changer, Add’l Cntrwht, Cummins QSC Dsl Eng, 54” Digging Bkt, 39’2” Digging Reach, 3185 Hrs ....$95,000 15 JM Call George 219-696-8911

1994 Blaw Knox PF150 8’ Paver with Deutz Diesel Engine, 8’ screed with hydraulic strike offs, 2012 Cimline 150 crack sealer, w/ heated hose, 2016 Volvo DD120B roller, 78” wide drums, diesel burner, 2000 hours. #8557...............$19,750 148HP engine, 1125 hours, #7768.............$95,000 approximately 2,900 hrs use.............$15,000 as is 800-283-1336 15 JM 15 JM 800-283-1336 15 JM 800-283-1336

2017 DD120C, w/Intelligent Compaction and Pass Counting, #7540 ...........................................$97,000 800-283-1336 15 JM

Page 72 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. JULY/AUGUST 2021 CRANE SAFETY COURSES July 26 – July 30, 2021 Mobile Crane Train The Trainer, Orlando, FL July 27 – July 30, 2021 Overhead Crane Inspector Training, Houston, TX August 2 – August 5, 2021 Overhead Hoist Maintenance Training, Orlando, FL August 4 – August 5, 2021 Forklift Operator & Inspector Training, Cincinnati, OH August 10 – August 13, 2021 Mobile Crane Inspector Training, Cincinnati, OH August 17 – August 20, 2021 Overhead Crane Train The Trainer, Houston, TX August 18 – August 20, 2021 Tower Crane Operator & Inspector Training, Orlando, FL August 18 – August 20, 2021 Rigging Inspector Training, Cincinnati, OH August 23 – August 25, 2021 Boom Truck Train The Trainer, Orlando, FL August 23 – August 27, 2021 Mobile Crane Train The Trainer, Houston, TX August 24 – August 27, 2021 Overhead Crane Inspector Training, Cincinnati, OH To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com NATIONAL ASSOCIATION OF WOMEN IN CONSTRUCTION (NAWIC) 2021 NAWIC 66th Annual Conference Dates: August 11-14, 2021 Location: Embassy Suites Charlotte Concord Golf Resort & Spa 5400 John Q Hammons Drive, NW Concord, NC 28027 Description: The 2021 Annual Conference is focused on connecting with peers, collaborating with other women in the industry, and constructing a better future for all women in construction. The 3-day conference has two amazing keynotes, many educational breakout sessions, on-site training and certifications, and networking opportunities.

Who’s ready to Connect-Collaborate-Construct with other NAWIC members and partners across the country? This year’s conference will be inperson with a virtual component. The virtual component will include live streaming and recordings of all general sessions, keynotes, the installation luncheon and awards gala. As we continue to receive support from our annual conference sponsors, we may be able to record some or all of the breakout sessions to provide both in-person and virtual attendees the opportunity to see a session they missed or want to see again. This year’s Annual Conference offers a variety of sessions that will focus on your professional development, industry education, and personal development, as well as NAWIC-focused sessions. Gain new insight and perspectives from numerous speakers, expand your network, and find new ways to strengthen and ampify your career. Our diverse topics offer something for every woman in every facet of our industry. Registration is now open. For more information and to register, please visit https://www.nawic.org/nawic/Annual_Conference.asp. Additional questions on our Conference? Email us nawic@nawic.org. ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) 2021 Leadership Conference Dates: August 16 – August 18, 2021 Location: Disney's Yacht & Beach Club Resort 1700 Epcot Resorts Blvd Lake Buena Vista, FL 328303 Description: Business relationships between employees and customers thrive when you have an effective and diverse leadership team in all areas of operation – from the branch level to the corner office. Cultivating those leaders requires education and networking opportunities. As the equipment distribution industry becomes increasingly competitive, it is more important than ever before to invest in leadership development for the future of the business. Take the opportunity to set up the new and future leaders in your dealership for success by sending them to the AED Leadership Conference. No other event will give you more focused expertise on building and optimizing leaders in your dealership. Attending will enable professionals to grow by delivering actionable content on leadership principles, the most relevant industry information, technology updates, and a platform to grow their professional networks and to learn from their peers. The Leadership Conference is one of the most highly anticipated industry events of the year across North America. There are many reasons attendees return year after year, including preparing for a promotion, inspiration for improving and motivating the team, and the overall quality of the program. Regular registration starts on June 21, 2021 and ends on July 25, 2021. Late registration starts on July 26, 2021. For more information and to register for this event, please visit https://aednet.org/events/leadership-conference. If you need assistance, please email help@aednet.org. ASSOCIATON OF EQUIPMENT MANUFACTURERS (AEM) 2021 Product Safety & Compliance and Product Liability Virtual Seminars

Dates:

August 23-26, 2021 Product Safety & Compliance - August 23-25, 2021 Product Liability - August 26, 2021 Description: Your once-a-year opportunity to train with and learn from more than 40 of the smartest people in off-road equipment safety and compliance is here. Register now for the Product Safety & Compliance and Liability Digital Seminars to: • Unlock 3.5 focused days of expert-led sessions • Access two information-rich keynotes • Gain actionable tactics that enrich your company and your career The best part? Every educational session is immediately followed by live Q&A with speakers, so you can get your toughest questions answered in real-time. Don’t miss out on hearing the latest industry developments on risk assessment, hazard communication, technical publications, standards and regulations, incident investigation & litigation, and more. Registration is now open. Visit https://s6.goeshow.com/aem/psls/2021/index.cfm to register. If you have questions regarding your registration, please contact Patricia Rondon at 414-274-0667 or prondon@aem.org. If you require additional information please contact Nathan Burton, AEM technical and safety services manager at nburton@aem.org. HISTORICAL CONSTRUCTION EQUIPMENT ASSOCIATION (HCEA) 35th Annual International Convention & Old Equipment Exposition Dates: August 27 – 29, 2021 Location: Kocher Farm, 1151 Hawk Road, Glasco (south of Concordia), Kansas The Historical Construction Equipment Association International Convention and Old Equipment Exposition 35th Annual The Big Dig, hosted by Prairie Plowing Days, Concordia KS welcomes you! This is a working show! There will be dirt moving equipment; working scrapers, haul trucks, shovels ,cranes-both drag-line and Clam shell buckets, steam traction engines, prairie tractors, pull graders, motor graders, elevating grader, dozers , wheel loaders, perhaps the best way to imagine the demonstrations is if you could go back in time to the 1950’s and drop in on a major highway construction project. You will see nearly every type of equipment that would have been working on that job. There will be a rock crushing plant, a “Bin-A -Batch ready mix plant from the 1950’s and a host of other sites. There will also be a variety of static displays, cars, trucks, old crawlers and wheeled tractors, as well as vendors on site. Steam and prairie tractor plowing demonstrations. Questions? Please contact Cloud County Tourism at 785-243-4303, Kurt Kocher at 785-243-0083 or Brad Smith at 785-243-0067. Visit http://www.cloudcountytourism.com and click on “The Big Dig” for additional information. ASSOCIATON GENERAL CONTRACTORS OF AMERICA (AGC) AGC Annual Convention 2021 Dates: September 21 – 23, 2021 Location: Marriott World Center, Orlando, FL

The AGC Annual Convention provides contractors of all sizes the opportunity to gain business-critical insights into the issues most affecting their operations. From risk management to safety on the jobsite to the latest in project management solutions, AGC brings together experts from across the industry to share their knowledge and help prepare contractors to meet the challenges of today and tomorrow. And no time is better than now to prepare your company for the challenges (and opportunities) facing our industry as we collectively emerge from the pandemic, grapple with economic uncertainty, and navigate the legislative and regulatory policies of the new administration. Experience for yourself how the AGC Annual Convention provides contractors of all sizes and markets the opportunity to gain a competitive advantage, to help protect key business interests, make important industry connections, and to prepare for industry disruptions. Bring Your Team to the AGC Equipment, Technology & Construction Solutions Expo: The AGC Annual Convention is the place for construction superintendents, project managers, senior executives, and owners to hone their knowledge as contractors, and the AGC Equipment, Technology & Construction Solutions Expo provides a one-of-a-kind opportunity for your whole team to meet with more than 100 leading industry suppliers showcasing the latest tools, solutions and equipment to power your construction business. Registration is now open! For more information visit https://convention.agc.org/ ASSOCIATON OF EQUIPMENT MANUFACTURERS (AEM) The Utility Expo (FORMERLY ICUEE) Dates: September 28 – 30, 2021 Location: Kentucky Exposition Center 937 Philips Lane Louisville, KY 40209 We are excited to announce ICUEE has a new name: The Utility Expo. This all-inclusive name better reflects The Utility Expo experience – a place where professionals from all utilities come together to share new equipment, new ideas, and new solutions. Covering more than 30 acres, The Utility Expo is the largest event for utility professionals and construction contractors seeking the latest industry technologies, innovations, and trends. Top five Reasons to Attend The Utility Expo 2021: • See, touch and experience 30+ acres of new equipment, safety products, and technology • Network with 19,000+ industry peers from all utility sectors • Test-drive and compare the latest equipment before you buy or rent • Attend education right on the show floor to learn about the latest best practices from industry experts • Talk to product experts from over 800+ manufacturers and hear firsthand how to get the most out of your equipment Tickets for The Utility Expo 2021 are now available. The earlier you register, the more you save! To register, visit https://www.theutilityexpo.com/. For more conference information please contact 508-743-8531 or email us at TheUtilityExpo@Xpressreg.net.

Events are subject to change, check websites for updates

Sakai America Names Ono Vice President of Sales, Marketing

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues – Black & White $135 • Color $195

1999 Kobelco SK-115 Excavator, 7,000 hours, Cummins Motor, runs good, with Thumb .....................................$23,000

Detroit Diesel Model 12V71 TT, Runs good, on stand with radiator and exhaust, Twin Disc-RFD Power Takeoff .....$4,500

Gregory Trucking, Inc. 440-322-2907

15-16 AP

Here's how the BARGAIN ADS Work:

EXTREME SERVICE THUMBS 50% OFF ALL THUMBS FOR Large Excavators Blow Out Special $5,850 Many small thumbs available Call for Pricing 218-863-6444 Email: attintl@loretel.net 15-16 AP

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. Additional $25 to place online • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

For more information, call Construction Equipment Guide today at

800/523-2200

Sakai America has appointed Toshiyuki Ono to the newly created position of VP sales and marketing, relocating from the Sakai Heavy Industries corporate office in Tokyo, Japan. He spent his first five years in sales, developing the domestic market in Japan, and the last 20 years growing international markets in Southeast Asia, China and Oceania. “Ono brings a long history of Sakai machinery sales to us in the Adairsville, Ga., office,” said Yasunori Azumi, president of Sakai America. “He has successfully grown market share in his previous assignments, and we are happy to have him with us as we continue our Toshiyuki Ono growth here in the U.S.” “I look forward to working with our established sales and marketing the Sakai America headquarters in team, and meeting the people within our Adairsville, Ga., in early July. For more information, visit dealer network and the U.S. construction industry,” said Ono, who began working in www.sakaiamerica.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 73

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE.. MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VWERIZON.NETR; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 –––––––––––––––––––––––––––––––– WANTED (WV): NELSON 6000 WELDERS - LOOKING FOR NELSON DUAL GUN SYSTEM WITH GEN SET AND TRAILER, AND/OR PRO-WELD DUAL GUN ARC 3000 MACHINE. EMAIL: WEH@TRIANGLEINCORPORATED.COM; PHONE: 304-562-6282 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CHALLENGER 85C TRACTORS - I AM IN NEED OF A USED SET OF TRACKS FOR ANY OF THE CAT CHALLENGER 65, 75 OR 85C. EMAIL: PI2279@YAHOO.COM; PHONE: 319-470-8388 –––––––––––––––––––––––––––––––– WANTED (MA): ALL MODELS CATERPILLAR EXCAVATORS - LOWER SUPPORT RAIL GOES FRONT TO BACK RIGHT SIDE AND TOOL BOX RH SIDE LOWER RAIL THAT GOES FRONT TO BACK SUPPORTING TOOL BOX. EMAIL: BILLD@TDICENZO.COM; PHONE: 207-214-9610 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS - LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX270,EX300,EX330,EX400,EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS CATERPILLAR WHEEL LOADERS - WE ARE LOOKING FOR CAT 966F, CAT 980C, CAT 980F AND CAT 966E/D. EMAIL: AHMED@IUKANDCO.COM; PHONE: 03003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR CRAWLER DOZERS - LOOKING FOR D5B, D6C OR D6D. WILLING TO DO SOME WORK ON THEM IF NEEDED, EVEN PARTS MACHINE. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET PHONE: 317-439-7306 –––––––––––––––––––––––––––––––– WANTED (CT): ALL MODELS DYNAPAC LAND ROLLERS - WANTED GALLION STATIC PAVING ROLLERS EMAIL: JPICT@AOL.COM ––––––––––––––––––––––––––––––––

WANTED (NJ): CASE BACKHOE LOADERS, MODEL 580SK, 580L, 580LII, 580SL, 580SLII, 580M, 580MII, 580MIII 580SMII, 580SMIII, 580SMIII EMAIL: FRANKHORAN@GROFFTRACTOR.COM; PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS LOOKING TO BUY USED HITACHI EXCAVATORS EX200LC, EX270, EX300, EX330, EX400, EX450. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 420D WHEEL LOADER – NEED TO BUY ANY BACKHOE. ALSO LOOKING FOR EXCAVATOR AND WHEEL LOADER. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS - NEED TO BUY HITACHI EX 400-1 AND EX 450-5, ALSO LOOKING FOR ZAXIS 200 AND EX 300-1 AND EX 270-1, PLEASE LET US KNOW. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EXCAVATORS, ALL MODELS. I NEED TO BUY CAT USED WHEEL LOADERS 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, 14M AND HITACHI EXCAVATORS ZX 200-1, EX 270-1, EX 300-1, EX 400-1 AND EX 450-5. (RUNNING OR NON-RUNNING MACHINES). EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 926M WHEEL LOADERS - LOOKING TO BUY ANY USED CONSTRUCTION *ANY CONDITION* EMAIL: SEARCHT930@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 12H MOTOR GRADER - I`M LOOKING TO BUY ANY CAT 12H, ANY CONDITION EMAIL: NANI@EAGLEEQUIPMENT.CO; PHONE: 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): FIAT-HITACHI EXCAVATORS – LOOKING FOR PARTS AND FINAL DRIVES FOR FX310 FIAT HITACHI EXCAVATOR. EMAIL: STILLINN43@YAHOO.COM; PHONE: 973-277-3631 –––––––––––––––––––––––––––––––– WANTED (US): SKELETON – SKELETON – SKELETON BUCKETS. WANTED AND AVAILABLE. CALL US WITH WHAT YOU HAVE. SKELETON BUCKETS NEEDED FOR ALL MAKE/MODEL EXCAVATORS AND WHEEL LOADERS. EMAIL: PERCY@RANSOME-EQUIP.COM; PHONE: 215-350-1165 ––––––––––––––––––––––––––––––––

WANTED (US): JOHN DEERE 700K LGP CRAWLER DOZERS – WANT TO BUY FROM USER OR BANK REPOSSESS WITH WINCH OR NOT. UNDER 900 HOURS ONLY, NO WEB BUDGET UNDER $85000.00CDN - NO JUNK NO HACKER CONTRACTORS OR PAYMENT OUT. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA; PHONE: 1 450 346 8975 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 140G MOTOR GRADERS – NEED TO BUY CAT 140G MOTORGRADERS 1988 OR UP .. ANY CONDITION. OFFER IT US. EMAIL: IUKANDCO@GMAIL.COM; PHONE: 03335555360 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT SKID STEER LOADERS – (2) 1978 OR 1979 BOBCAT 825 SKID STEER LOADERS - WITH PERKINS DIESEL ENGINES. CALL 412-571-2500, ASK FOR KEITH –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS; NEED TO BUY CAT WHEEL LOADERS ANY CONDITION LIKE CAT 930, 926, 950B, 966E, AND 966F. EMAIL: IKRAMKHAN@IUKANDCO.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS – SCHWING, PUTZMEISTER, ALLIANCE, ELBA,CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS & SIZES. OLD OR NEW!!! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED & PARTS AND TRUCK MOUNTED PUMPS PURCHASED. EMAIL INFORMATION. INSTANT PAYMENT GUARANTEED. FINDERS FEES PAID!!! EMAIL: BBENEDETTO @ COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS CURRENTLY LOOKING FOR HITACHI EX300LC-5 , EX330LC-5 , EX400LC , EX450LC , ZX400LC AND EX270LC. EMAIL: SALES.INTLBROKERS@GMAIL.COM; PHONE: +923149984807 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS WE NEED THE FOLLOWING HITACHI EXCAVATORS: EX200, EX270, EX300, EX400, EX450. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: 03332925108 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 ––––––––––––––––––––––––––––––––

WANTED (TN): GOOD USED ENGINE 14425 FOR A KOMATSU TRACKLOADER. MODEL D57S-1 ENGINE MODEL S4D130-1 SERIAL 07164 OF TRACK-LOADER HP135 @ 1900RPM. EMAIL: BOBSTOUT55@YAHOO.COM; PHONE: 423-727-7924 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D4E CRAWLER DOZER - LOOKING FOR A GOOD D4E PERFERABLY WITH STRAIGHT BLADE AND TILT. EMAIL: A.SANDRA@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX 450 CRAWLER EXCAVATOR. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S-3 OFF-HIGHWAY TRUCKS LOOKING FOR REAR END DIFFERENTIAL FOR 30 TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 ––––––––––––––––––––––––––––––––

WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 –––––––––––––––––––––––––––––––– WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPIONSERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 –––––––––––––––––––––––––––––––– WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT 777 F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– \WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 74 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Increase Efficiency With Trimble GuidEx Guidance System Trimble has introduced the Trimble GuidEx Machine Guidance System, an advanced machine navigation solution intended to quickly and efficiently guide machines along route corridors or to specific target areas, while providing local awareness using customer provided mapping or engineering data to create exclusion and inclusion zones. Users can quickly install the Trimble GuidEx system on anything from utility terrain vehicles (UTVs) to heavy equipment, on- or off-road.

“Trimble GuidEx was built to meet the needs of natural resource exploration activities but can be used for many other applications,” said Scott Crozier, vice president of Trimble Civil Construction. “This system improves productivity and awareness with easy, efficient, task-specific navigation.” To ensure work is done exactly where it should be, proximity and zone breach alarms can be set based on custom exclusion and inclusion zones. Trimble GuidEx uses an integrated GNSS and Inertial Flexibility for Navigation System (INS) to Many Applications Trimble GuidEx provides streamlined design-stakeout navi- compute a virtual reference Trimble GuidEx provides gation to eliminate the need for advance survey stakeout point and precise heading, pitch streamlined design-stakeout operations, enabling machine operators to navigate to an and roll. Regardless of the navigation to eliminate the need exact point without stakes or surveyors, ideal for natural equipment or the application, for advance survey stakeout resource exploration such as core sampling operations. Trimble GuidEx uses customer operations, enabling machine provided data to keep operators operators to navigate to an exact point with- of tasks including clearing paths for access aware of prohibited or dangerous areas and out stakes or surveyors, ideal for natural routes, snow plowing and more. With com- decrease time and money wasted on unnecresource exploration such as core sampling prehensive local machine data logging, con- essary work. operations. In addition, corridor navigation tractors can capture a range of data including Trimble GuidEx provides crossline naviallows users to efficiently complete a range position, time and speed. gation along predefined routes via an inte-

grated software-based lightbar viewed on the display, including visual and audible alarms when operators breach user-defined distances from a centerline. The system also provides point and pad navigation information with intuitive navigational arrows, supported by a wide variety of data recording settings. Fully Connected Solution Compatible with virtually any machine type, Trimble GuidEx connects equipment to the office to keep everyone aligned. Operators and supervisors can send mapping data to and from the machine and office to avoid rework. Reliable guidance data allows contractors to track machines by time or user-defined event triggers for a more accurate representation of the machine utilization cost of a project. Trimble GuidEx can leverage Real Time Kinematic (RTK) and CenterPoint RTX correction services for enhanced high-accuracy positioning. Availability The Trimble GuidEx Machine Guidance System is now available globally through SITECH distributors. For more information, visit heavyindustry.trimble.com/guidex. 

Kubota Introduces E-Controlled D902-K Kubota Engine America’s newly developed D902-K is “Kubota’s first electronically controlled diesel engine below 19 kW,” according to Kubota Corporation’s president and representative director, Yuichi Kitao. The D902-K will bolster Kubota’s diesel engine line as it responds to various regional emission standards, including EPA Tier 4, Stage V, China IV standards and China’s Category III national smoke regulations, which will be implemented in December 2022. The new D902-K is a three-cylinder diesel engine with a displacement of 0.898 L and an output of 18.5 kW. “As an industry leader, Equipped with a one-ofa-kind common rail system developed exclusively for small engines, the electronically controlled D902K comes with a new TVCR combustion system. The result is an engine that is compact and easy to mount and reduces the amount of black smoke to an undetectable level, according to the manufacturer.

Kubota continues to meet the diverse engine needs of equipment manufacturers from around the world,” Tomokazu Matsushita, president of Kubota Engine America, said. “Kubota’s D902-K electronically controlled engine allows manufacturers to easily replace the existing engine without the need to redesign the current machine. It will match current dimensions, structures and power takeoff of existing engine.” Equipped with a one-of-a-kind common rail system developed exclusively for small engines, the electronically controlled D902-K comes with a new TVCR combustion system. The result is an engine that is compact and easy to mount and reduces the amount of black smoke to an

The D902-K will bolster Kubota's diesel engine line as it responds to various regional emission standards, including EPA Tier 4, Stage V, China IV standards and China's Category III national smoke regulations, which will be implemented in December 2022.

undetectable level, according to the manufacturer. In addition to the suppression of black smoke, the D902-K consumes approximately 5 percent less fuel than its current conventional model. The D902-K is capable of communicating via the Controller Area Network (CAN), which allows engine speed and torque to be controlled using signals from the vehicle and can also acquire engine operating data for telematics purposes. Mass production is scheduled to begin in 2022. For more information, visit kubotaengine.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 75

CON S T RUC T ION E QUIP ME N T

665+ ITEM E S SELL

AUCTIION

NO RESERVE! Straight Simple Sold ® 86 6 . 60 8 .92 83

THURSDAAYY, JULY 29 2

48 82 te e r b i lt w tr uc

Bi d d i n g s t a r t s t o c l o s e a t 1 0 a . m . C

D 6N LG

JY9747 ‘06 Challenger MT865B tractor

IF9858 ‘14 CAT 336EL excavator

DL4991 ‘14 Komatsu PC360LC-10 excavator

DF6480 ‘20 20 Peterbilt 337 rollback truck

DM3841 ‘12 12 CAT 950K wheel loader

DL4985 CAT D6K XL dozer

IC9461 Kershaw 75G2 trim saw

IC C9460 ‘09 09 Prentice Hydro-Ax 2764 mulcher

HT9319 ‘11 11 Int Int’ll 7600 vac cuum truck

DM3828 ‘04 Mack CH613 drilling rig truck

DL0995 ‘08 John Deere 770D motor grader

DC2106 ‘14 JCB 3CX14M4CE backhoe

JZ9986 ‘12 CAT 938H wheel loader

JY Y9808 ‘99 CAT PM-465 m milling machine

IC9 9462 CAT skid dder applicator

INVENTORY INCLUDES: WHEEL LOADERS: ‘14 CAT 950K, ‘12 CAT C 938H, ‘10 CAT AT 924H, ‘07 CAT 9228GZ, ‘05 Komatsu WA380-5L, Hyu undai Robex 210LC-7 MOTOR GRA ADER: ’07 John Deere 770D EXCAV VA ATORS: ‘14 Komatsu PC490LC-10, ‘07 CAT 330DL, ‘05 CAT 325CL SCRAPER TRACTOR: ‘06 Bell 4206D 4WD SCRAPER: ‘14 Icon Earthmover MINI EXCAV AVA VATOR: ‘16 CAT 308E2 CR DOZER: ‘93 Komatsu D65PX-12 VA VACUUM TRUCK: ‘09 Sterling L7500 and more. All items are sold d ““A AS IS.” 10% buyers premium app plies. Aaron McKee TX T X Li License #16401.

purppleewavee.com ccom BID NOW! N ! pu

Page 76 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Dallas, TX July 28, 2021 For: Rentals! Late Model Construction Equipment & more • Timed Online July 29, 2021 For: Secure Party. Very Large Amount of Support Equipment (TX) • Online July 29, 2021 For: Late Model Construction Equipment & more (Mexico) • Albany, NY July 31, 2021 For: Construction Equipment & more Retirement Auction • Syracuse, NY August 3, 2021 For: Personal Property Dispersal • Pompey (Syracuse), NY August 4, 2021 For: Late Model Construction & Agricultural Equipment • Timed Online August 5, 2021 For: Late Model Construction & Agricultural Equipment • Racine, WI August 6, 2021 For: Very Late Model Snow & Construction Equipment & more • Cleveland, OH August 7, 2021 For: Job Completion Auction • Attleboro, MA August 14, 2021 For: Utility, Pickups, Vans, Construction Equipment & more • Houston, TX August 17, 2021 For: Large Consolidation Auction, Late Model Construction Equipment • Houston, TX August 18, 2021 For: One Owner Large Fleet Top Construction & Utility Equipment • Timed Online August 19-20, 2021 For: One Owner Large Fleet Top Construction & Utility Equipment • Portland, ME August 21, 2021 For: Complete Liquidation. Construction Equipment & more • New Martinsville, WV August 27, 2021 For: Very Late Model Construction Equipment & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Grande Prairie, AB July 28-29, 2021 • Dickinson, ND July 30, 2021 • Rocky Mountain Regional Event August 4, 2021 • Carlsbad, NM August 10-11, 2021

• Tipton, CA August 11, 2021 • Houston, TX August 24-25, 2021 • Phoenix, AZ September 1, 2021 • Orlando, FL September 2, 2021

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• SE Regional Event September 9, 2021

BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• Chehalis, WA September 10, 2021

• ONLINE July 27, 2021

• Las Vegas, NV September 15, 2021

• ONLINE August 3, 2021

• Marietta, PA Fri., August 13, 2021 For: Truck, Trailer & Equipment Auction

• Montreal, QC September 15-16, 2021

• ONLINE August 10, 2021

• NE Regional Event September 15-16, 2021

• ONLINE August 17, 2021

• Great Plains Regional Event September 17, 2021

• ONLINE August 24, 2021

• Sacramento, CA September 22, 2021

• ONLINE August 31, 2021

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• ONLINE Thurs., August 4, 2021 For: Truck, Trailer & Attachment Auction

ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061 • ONLINE Ends July 26, 2021 For: Town of Wolcott, CT Surplus Auction • ONLINE Ends August 9, 2021 For: Town of Fallsburg, NY Equipment Auction AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401 • ONLINE July 19 - 25, 2021 • ONLINE July 26 – Aug.1, 2021 • ONLINE August 2 - 8, 2021 • ONLINE August 9 - 15, 2021 • ONLINE August 16 - 22, 2021 • ONLINE August 23 - 29, 2021 • ONLINE Aug. 30 – Sept. 5, 2021 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • ONLINE Fri., July 30, 2021 For: Woodburn Equipment Auction • ONLINE Sat., August 14, 2021 For: Sacramento Equipment Auction • ONLINE Fri., August 27, 2021 For: Woodburn Equipment Auction

• ONLINE July 28, 2021 • ONLINE August 4, 2021 • ONLINE August 11, 2021 • ONLINE August 18, 2021

• Marietta, PA Fri., October 15, 2021 For: Truck, Trailer & Equipment Auction

• ONLINE Wed., September 15, 2021 For: Truck, Trailer & Attachment Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

• ONLINE August 25, 2021

• Timed Auction Tues., July 27, 2021 For: Online Only

DEANCO AUCTIONEERS www.deancoauction.com 601-656-9768

• Timed Auction July 28 - 29, 2021 For: Premier Timed Auction: Concord, NC

• Philadelphia, MS September 15 - 16, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction • Philadelphia, MS November 17 - 18, 2021 For: Huge 2-Day Equipment, Truck & Trailer Auction

• Timed Auction Tues., August 3, 2021 For: Online Only • Timed Auction Tues., August 10, 2021 For: Online Only

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

JACK NITZ & ASSSOCIATES nitzauctions.com 402-727-8800

• Monterey, IN Tues., August 17, 2021 Absolute AG & Construction Reduction Auction

• Fremont, NE Thurs., September 2, 2021 Large Late Model Truck, Trailer, Construction & Farm No Reserve Auction

• Pendleton, IN Fri., September 17, 2021 29th Annual Fall Auction FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Akron, OH Wed., August 18, 2021 For: J & J Elite Transportation Auction

BASINGER AUCTION SERVICE LTD basauctions.com 330-330-8949

GEYER AUCTION COMPANIES www.geyerauctions.com 484-239-3273

• ONLINE Ends August 17, 2021 For: Construction Equipment & Tools Online Auction

• Online Auction Closes Wed., August 11, 2021 For: Construction Company Retirement Auction

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • ONLINE August 5 – 12, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE September 30 – October 7, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles • ONLINE December 2 - 9, 2021 For: Heavy Equipment, Contractors Equipment, Trucks & Vehicles

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Online Only July 27, 2021 For: Fleet Reduction Virtual Auction • Columbus, OH July 28, 2021 For: Featuring Heavy Construction Equipment, Trucks & Related Items • Online Only July 29, 2021 For: Wenco Energy Equipment & Materials Online Liquidation • Brooklyn, MS August 20 - 21, 2021 For: Featuring Heavy Construction & Farm Equipment, Trucks, Trailers & Misc. Items. Live & Online JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Birmingham, AL Sat., July 24, 2021 For: Seller’s Machine Co. Complete Liquidation • Atlanta, GA Wed., July 28, 2021 For: Jackson Paving Co. MIDEAST EQUIPMENT SUPPLY www.mideastequip.com 860-370-9993 • Live Virtual Tues., July 27, 2021 For: Oil, Gas and Construction Auction. Virtual Online Bidding Only MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311 • Webcast Auction Thurs., July 29, 2021 For: Surplus to Continuing Operations, D&D Power

• Cleveland, OH Fri., August 27, 2021 For: Live & Online – Commercial Truck Fleet Auction RTI AUCTIONS www.teitsworth.com 585-243-1563 • Timed Online July 20 - 27, 2021 For: July NetAuction Edition 2 STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online July 19 - 27, 2021 For: Twin Pines Trucking Excess Inventory Auction • West Fargo, ND Wed., July 28, 2021 For: AgIron West Fargo Event • Timed Online August 6 - 11, 2021 For: Steffes Auction, Upper Midwest Locations • Timed Online August 10 - 17, 2021 For: Multi-Party Construction Auction • Timed Online August 10 - 17, 2021 For: Steffes Truck & Transportation Auction • Timed Online August 20 - 25, 2021 For: Steffes Auction, Upper Midwest Locations • Mt. Pleasant, IA Wed., August 25, 2021 For: AgIron Mt. Pleasant Event VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Lake Elsinore, CA Sat., July 24, 2021 For: July Heavy Equipment Auction

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760

• ONLINE Tues., July 27, 2021 For: Government Auction

• Online Only Fri., August 6, 2021 Public Auction

• ONLINE Wed., July 28, 2021 For: Vehicles & Equipment Auction • ONLINE Thurs., July 29, 2021 For: Construction Equipment Auction • ONLINE Wed., August 4, 2021 For: Ag Equipment Auction • ONLINE Thurs., August 5, 2021 For: Truck & Trailer Auction ROSEN & COMPANY, INC. www.rosenandcompany.com 216-990-1831 • Online Only Mon., July 26, 2021 For: Material Handling Equipment, 60+ Forklift Batteries & much more

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Sat., August 14, 2021 Public Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Kissimmee, FL Thurs., September 2, 2021 For: Florida Auction • Online Only Thurs., September 16, 2021 For: Multi State Auction • Findlay, OH Fri., September 24, 2021 For: Ohio Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 77

Page 78 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Work in Tight Conditions to Restore Historic Bridge BRIDGE from page 60

tain a schedule, be productive and continuing at a rate to finish on time,” Schmitz said. This is where Finley Engineering plays a key role in this project. Finley relies on Bridge Integration Modeling (BrIM) approach to assist with the complex sequencing and scheduling of this bridge project, Nelson said. According to the Finley web site, the BrIM allows construction teams to “proceed with the integration of the complex construction sequencing, scheduling and planning for upcoming construction activities.” “Finley monitored and analyzed the sequencing plan for construction loading,” said Schmitz. “Their task is largely to analyze the bridge to ensure what we do from a construction standpoint is safe so that the demo and rebuild doesn’t cause damage or exceed the capacity of the arches. “They also are responsible for determining the geometry that we pour the columns and caps back to. These columns and arches move up and down with the temperature

and weight. They need to take these factors into account to tell us where to pour the columns and where to pour the caps.” Because there was no room for high capacity crawler cranes to work from the river, Ames trucked in Manitowoc tower cranes to work from above the bridge. “To station these cranes on the bridge, we designed a custom tower base to fit inside the pier and poured it with concrete,” said Schmitz. “So, the cranes are supported by the bridge itself.” Three Manitowoc 3450 tower cranes are out on the bridge on piers two, three and five, with a fourth crane scheduled to be mounted later this summer. Preparatory work below the bridge deck began in May 2020 out of site of the drivers and pedestrians crossing above. Schmitz ticked off a list of preparatory activities ahead of the demo and rebuild during this time including the installation of work platforms, placing protection over the utilities hanging under the bridge, cofferdam construction and pier jacket repair and setting the

Cat excavators were used on this project primarily for cofferdam construction and concrete removals.

bases for the tower cranes. At the first of this year, Ames crews shifted into high gear. After closing the bridge to traffic, crews began the demolition and rebuild. The bridge is covered with a series of ascending work platforms up to the bridge deck at each span. Sections of bridge deck through

the length of the bridge have been removed while pier jacket work continues below. Through the final two years of the project, bridge crews will continue to dismantle the bridge deck and spandrel walls in a very precise sequencing schedule and will be working through the winter

months to finish this project on schedule. While the project sequencing and monitoring bridge loading are key challenges on this project, safety is the highest priority for all parties. “Working at heights with a lot of parts and pieces flying around between demos and rebuilds, continually changing site conditions, tie off points and water safety are critical,” Schmitz said. Managing silica during concrete demolition is another safety priority, Schmitz noted. “We need to take precaution to make sure employees are not exposed to silica and that they take every precaution. It’s an engineered vacuum system,” Schmitz said. To date, both Schmitz and Nelson are happy with the progress made and are confident this demo and rebuild of the Third Avenue bridge will be done by November 2022. (All photographs in this article are Copyright 2021 Construction Equipment Guide. All Rights Reserved.)  CEG

Safety Business Offers Tips On Maintaining Hard Hats HATS from page 70

mising the integrity of the material it is made from,” noted the UK aggregates industry website. “To maintain safety standards, workers should remove any unchecked stickers and sanitize and clean their head protection equipment in a safe environment.” The site noted that excessive wear and tear in extreme environments, such as exposure to high temperatures, chemicals or sunlight, can significantly shorten the product’s life span. “When evaluating a time frame for safe usage, workers should conduct risk assessments to consider their own unique environment,” suggested the website. “Workers should also consider the daily hazards they face in the workplace.” The European Standard for industrial safety helmets, EN 397, which provides shock absorption, penetration resistance and protection against impact. The standard applies to workers on the ground. Maintaining Your Hard Hat Novak of Orr Safety stressed that before

and after each use, every hard hat should be inspected. She suggested a general inspection process: 1. Look at the shell of the hat for any breakage, cracks, craze patterns, discoloring, chalky appearance or anything that appears out of the norm. 2. Inspect the suspension for loss of flexibility, cracks, breaks, frays or damaged

stitching. 3. Ask the worker wearing the hat if any impact or penetration occurred during their time using it. 4. If any of these conditions exist, replace the suspension or shell immediately (MSA 2010). “Regularly scheduled maintenance sessions with your helmet make all the differThe right helmet for the job must fit properly, be inspected regularly and be replaced when it becomes damaged.

ence,” suggested Novak. She lists the following steps to make sure your helmet is well cared for: • Clean your helmet as often as you inspect it. Avoid harsh detergent; use mild soap and warm water when cleaning it. • Avoid dropping, throwing, or using your helmet to sit on or as support. She noted that “safety-rated hard hats are not to be used as a vehicular or sports helmet.” • Never store personal belongings, such as cigarettes or earplugs, in between the suspension or shell of a hard hat. “These objects can transmit a large force to the head and neck, causing serious injury or death.” • Completely avoid using paints, solvents or hydrocarbon-type cleaners. “These substances can cause unnoticeable damage,” said Novak. • At the end of your day, store your helmet in a clean, dry area that does not exceed 120F. • Establish and maintain a replacement program for your hard hats, and all your PPE. Keep detailed purchase records and damage reports to keep track equipment lifecycles.  CEG

ABSOLUTE AG & CONSTRUCTION REDUCTION AUCTION

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 79

AUGUST 17TH, 2021 10AM EST LOEHMER AG PRODUCTS

4815 EAST 600 N • MONTEREY, IN 46960

Sale Site Phone: 888-841-7386 Live or Online at proxibid.com/dsa Visit our website for terms and conditions Auctioneer: Nic Smock - Lic. #AU10500037

BID LIVE ONLINE! Register for this auction on proxibid.com Can’t Make it to the Auction?

ABSOLUTE EQUIPMENT RENTAL AUCTION dsaauctions.com

AUGUST 27TH, 2021 9AM CST

NORTH PARK RENTAL SERVICES, INC

9624 North 2nd Street • Machesney Park, IL 61115 (Party Rental items auction November 16th)

Sale Site Phone: 888-841-7386 Live or Online at proxibid.com/dsa Visit our website for terms and conditions Auctioneer: Nic Smock - Lic. #441.002312

BID LIVE ONLINE! Can’t Make it to the Auction?

dsaauctions.com

Page 80 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cat Takes Gold at 2021 Edison Awards Caterpillar received gold for its Cat Command for Construction system during this year’s Edison Awards program. It was recognized as being the best of the best for the Smart Productivity Tools – Living & Working Environment category. Named after Thomas Alva Edison, the Edison Awards have recognized some of the most innovative products, services and business leaders in the world since 1987. Cat Command removes the operator from the machine, offering safe operation in hazardous areas. The Command console and station delivers remotecontrol operation from the comfort of an air-conditioned office, thousands of miles away from the project site. Eliminating shift-long machine vibration feedback, the system reduces the chances for operating injuries and fatigue-related accidents as well as increases productivity. “We’re honored the Edison Awards panel of judges, comprising of more than 3,000 senior business executives and academics, chose Cat Command as a gold recipient. I’m extremely proud of how talent from the entire enterprise coalesced around the vision for Cat Command, and I commend them for their dedication to innovation and hard work on a solution that adds significant customer value,” said Fred Rio, Construction Digital & Technology

Cat Command offers a portfolio of remote-controlled machinery. The broad offering includes Command for Compaction, Command for Dozing in Construction, Command for Excavating and Command for Loading.

Worldwide product manager. “Cat Command provides a solution to workforce shortages by opening opportunities to those with physical limitations preventing them from climbing into the equipment, attracting a new generation of workers and increasing the longevity of veteran operators.” Cat Command offers a portfolio of remote-controlled machinery. The broad offering includes Command for Compaction, Command for Dozing in Construction, Command for Excavating and Command for Loading. Its universal Command station includes a “virtual cab” with familiar controls where a single operator can, at the touch of a button, switch machines and job sites and

maneuver up to five different machines. The remote station features deep integration into existing machine features, and the system allows companies to efficiently switch between remote and manual operation. “We were very impressed by the level of collaboration and discovery in this year’s entries,” said Edison Universe Executive Director Frank Bonafilia. “Somehow, while facing the unprecedented challenges of this global pandemic, companies around the world figured out how to work safely and smartly and still innovate at an awardwinning level.” For more information, visit www.cat.com/commandforconstruction. 

CIM Holds Successful Auction at WOC The National Steering Committee (NSC) of the Concrete Industry Management (CIM) program — a business intensive program that awards students with a four-year Bachelor of Science degree in Concrete Industry Management — raised more than $1.150 million in gross revenue at its annual auction, held in conjunction with the World of Concrete on June 9. “This year’s auction was a tremendous success, both in terms of the value of donated items and the auction participants,” said Ben Robuck, CIM auction committee chairman. “The results are indicative of the high value the concrete industry places on the CIM program.” The 2021 CIM Auction featured a 2021 Mack Granite donated by Mack Trucks and equipped with a McNeilus FLEX Controls Bridgemaster mixer. Other big-ticket items included a Line Dragon donated by Somero Enterprises Inc., a Load and Go Ready Mix Truck Wash system donated by Shumaker Industries and a COMMANDbatch System donated by Command Alkon. “In addition to the above-mentioned big-ticket items, we were pleased to have donations from industry leaders like CEMEX, LaFargeHolcim, Lehigh Hanson Inc., Argos Cement, St. Marys Cement Inc., Roanoke Cement Company, GCC, Martin Marietta as well as admixture dona-

tions from CHRYSO Inc., Master Builders Solutions, Sika USA, Euclid Chemical, GCP Applied Technologies and CarbonCure Technologies, Inc.,” said CIM Marketing Committee Chairman Brian Gallagher. “Once again, we had incredible support from the World of Concrete show management, Informa and Ritchie Bros. Auctioneers,” said Gallagher. “We thank the many companies such as Mack Trucks, McNeilus, Somero Enterprises Inc., Shumaker Industries, Command Alkon, Volvo Construction Equipment Con-Tech, Beck Industrial, Multiquip Inc., Allen Engineering and the numerous companies that donated items to the auction to make it a complete success.” Due to current COVID-19 restrictions, the Auction was conducted entirely using Ritchie Bros. Auctioneer’s Timed Auction System. This is an online-only timed auction and bidding opened on June 7 and closed June 9. In addition to the live auction, a silent auction also was held. This year, CIM had record proceeds from the silent auction. Auction items included cement, concrete saws, drills, mixers, vibrators, safety equipment, screeds, decorative concrete tools, water meters, pumps, generators, training sessions, reference books, iPads and laptop computers, sports travel packages and golf and vacation travel packages. For more information, visit www.concretedegree.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 81

Page 82 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SON INC......................................................................77,81

KUBOTA EXCAVATOR..............................................................................83

ALEX PARIS CONTRACTING CO INC ....................................................20

LABOUNTY MANUFACTURING INC ......................................................53

ALTA EQUIPMENT COMPANY - WEST ..................................................84

LUBY EQUIPMENT SERVICES ..............................................................19

AMERICAN STATE EQUIPMENT ..............................................................7

M.T. KAYE STEEL LLC ............................................................................26

AMULET ..............................................................................................50,53

MAGELLAN CONSTRUCTION ................................................................56

ASCENDUM MACHINERY INC ..................................................................9

MANITOWOC CRANE GROUP................................................................47

ASTEC KPI-JCI ........................................................................................31

MAVERICK ENVIRONMENTAL ................................................................34

BANDIT INDUSTRIES INC ..................................................................32,33

MCCANN INDUSTRIES INC ......................................................................6

BANE-WELKER ..........................................................................................6

METSO OUTOTEC ..................................................................................30

BARGAINS ..........................................................................................71,72

MID COUNTRY MACHINERY ..................................................................67

BASINGER AUCTION SERVICE LTD ......................................................80

NORAM ................................................................................................54,55

BLUE RIDGE TRACTOR ..........................................................................58

PAT KELLY EQUIPMENT CO INC............................................................26

BOBCAT ENTERPRISES ........................................................................14

POWERSCREEN MW DEALER GROUP ................................................38

BOMAG AMERICAS INC ..........................................................................25

PURPLE WAVE INC ................................................................................75

BROOKS TRACTOR ................................................................................21 CEG SCALE MODELS ............................................................................27 CONSTRUCTION EQUIPMENT GUIDE ..................................46,52,66,73 CSTK JCB ................................................................................................22 CUSTOM MADE PRODUCTS ..................................................................58 DON SMOCK AUCTION CO ....................................................................79 DOOSAN PORTABLE POWER ................................................................57 ERB EQUIPMENT COMPANY..................................................................11 ESCO CORP ............................................................................................51 FABICK CAT................................................................................................2 FAE USA INC ............................................................................................34 FARM-RITE EQUIPMENT INC ................................................................10 FELLING TRAILERS............................................................................68,69 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................22

RACKERS EQUIPMENT CO ....................................................................39 RAMMER ..................................................................................................39 ROAD BUILDERS MACHINERY ..............................................................13 ROCK TOUGH QUALITY SCREENING ..................................................34 ROGERS BROTHERS CORPORATION ..................................................61 ROLAND MACHINERY INC........................................................................5 SANY AMERICA INC ................................................................................40 SMH GROUP-US ......................................................................................26 STAR EQUIPMENT LTD ............................................................................6 SUMMIT SUPPLY LLC..............................................................................40 TEREX FUCHS ........................................................................................35 TOWMASTER INC. ..................................................................................63 TRI-STATE TRAILER SALES ..................................................................65 VLP AN EQUIPMENTSHARE COMPANY................................................25

FOLEY EQUIPMENT CO..........................................................................15 GARY CARLSON EQUIPMENT ..............................................................16 HYUNDAI CONSTRUCTION EQUIPMENT ........................................42,43 ILLINOIS TRUCK & EQUIPMENT ..............................................................3 IRAY AUCTIONS INC................................................................................74 JEFF BELZER ..........................................................................................62 JJ SCHECKEL CORP ..............................................................................17 JOHN DEERE ..........................................................................................41 KIRBY-SMITH MACHINERY INC..............................................................23 KLEEMANN ..............................................................................................37 KOBELCO CONSTRUCTION MACHINERY ......................................44,45 KOMATSU AMERICA CORP ..............................................................58,59

OHIO STATE SUPPLEMENT COLUMBUS EQUIPMENT CO ................................................................12 COMPANY WRENCH ................................................................................3 CONSTRUCTION EQUIPMENT GUIDE ..................................................10 EQUIPMENT CORP OF AMERICA ............................................................9 FRONT COVER ..........................................................................................1 GORILLA HAMMERS ................................................................................1 JCB OF OHIO ............................................................................................2 SOUTHEASTERN EQUIPMENT CO ..........................................................5 TEREX TRUCKS/VOLVO..........................................................................11 THE MCLEAN CO ......................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 24, 2021 • Page 83

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650

1st Choice Equipment LLC

ABC Equipment Rental & Sales

Southeastern Equipment Co., Inc.

www.1stchoiceequipment.com

www.abcequipment.com

www.southeasternequip.com

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802

38525 Chester Rd. Avon, OH 44011 440/934-7368

Alta Equipment Co. www.altaequipment.com 18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA

Page 84 • July 24, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2UODQG 3DUN ,/ 708.349.8430 6RXWK (OJLQ ,/ 630.883.3320 6SULQJ *URYH ,/ 815.581.0071 2WWDZD ,/ 815 313 2070 815.313.2070 %ORRPLQJWRQ ,/ 309.585.3800

Re ach highher. We haave v youu covered. red.

*DU\ U\ ,1 219.977.4210

20 20

The future always dem mands more. From you, and from your equipment. Volvo demolition excavators feature unprecedented reach and state-of-the-art guarding packages straight from the factory. And with dedicated support from m Alta Equipment — the 2020 Volvo Dealer of the Year Year — you’re y equipped to handle whate ever tomorrow throws your way. w Visit v volv olv voc oce.co om/demo or contact y your our loc ocal Alta Equipment dealer today today y.

Vo lvo D e a l e r o f t h e Y e a r

altaequipment.com