Issuu

Published Nationally

$3.00

Midwest Edition

May 28 2022 Vol. XXVIII • No. 11

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

WisDOT Improves Safety With $136M Bypass

Illinois-Based Operator Advances in Round One of Cat Challenge...12

McCann Industries Holds Used Equipment Open House...22 Dean Teska (Kapur) photo

Building the bypass includes constructing eight bridges, including two over the WATCO railroad line on the far west end near County T.

By Cindy Riley Cristiani Builds Its Business With Gorilla Hammers Inventory...29

CEG CORRESPONDENT

To improve safety, construction crews in Outagamie County, Wis.,

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Attachments & Parts Section . . . . . . . . . . . . . .29-35 Truck & Trailer Section . . . . . . . . . . . . . . . . . . . .36-43 Aggregate & Recycling Section . . . . . . . . . . . . .47-61 Auction Section . . . . . . . . . . . . . . . . . . . . . . . . .78-85 Business Calendar . . . . . . . . . . . . . . . . . . . . . . . . . .84 Advertisers Index . . . . . . . . . . . . . . . . . . . . . . . . . . .86

are making changes to a hectic commuter route between New London and the Fox Cities area. The $136 million project includes building a bypass at Hortonville and

providing wider roadways to New London. The job calls for two roundabouts on each side of Hortonville, where the new bypass will meet with the existing WIS 15.

“Crash rates along WIS 15 are higher than the statewide average for rural two-lane highways, and traffic volumes increased more than see BYPASS page 62

FHWA Updates Bridge Inspection Rules Changes Include Technological Advances, Outdated Program Appeal, More By Lucy Perry

The FHWA has updated its National Bridge Inspection Standards (NBIS) for highway bridges per requirements in the Moving Ahead for Progress in the 21st Century Act (MAP-21). The updates incorporate technological advancements including drone use and repeal of the outdated Highway Bridge Replacement and Rehabilitation Program and the Discretionary Bridge Candidate Rating Factor. CEG CORRESPONDENT

see RULES page 68

The final rule updates requirements for maintaining a bridge inventory and reporting the results of bridge inspections.

Page 2 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2004 Cat 950G | $52,500

2017 Cat 320FL | $155,000

2015 Cat 938K4 | $86,500

SN: AXX00752 | Hours: 17,619

SN: YBM10011 | Hours: 4,908

SN: SWL03999 | Hours: 10,938

2013 Cat 336EL | $132,000

2007 Cat 345CL | $67,000

2008 Cat 430E | $47,500

SN: BZY01490 | Hours: 6,792

SN: PJW01732 | Hours: 14,666

SN: RLN00247 | Hours: 6,240

2009 Cat 140M | $157,500

2015 Cat 272D1 | $45,500

1994 Cat 615CII | $47,500

SN: B9M00882 | Hours: 5,429

SN: B5W01225 | Hours: 1,427

SN: 9XG00477 | Hours: 2,013 (Not actual)

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 3

ILLINOIS TRUCK & EQUIPMENT IS NOW SUNBELT RENTALS Sunbelt Rentals is committed to making it easy to get the equipment you need. Backed by a vast network of rental locations and the industry’s broadest fleet, our local team of resourceful problem solvers can deliver a trouble-free rental experience. No matter the project, we have the knowledge, experience and equipment to help you complete any job. At Sunbelt Rentals, we are here to Make It Happen for you. Visit sunbeltrentals.com to find the location nearest you.

EARTH MOVING SOLUTIONS MORRIS, ILLINOIS

815-941-1900

Page 4 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES 8

OHIO, KENTUCKY TO IMPROVE BRENT SPENCE BRIDGE CORRIDOR

The Brent Spence Bridge Corridor improvement project is hitting another milestone as ODOT requested proposals from consultants to support contract administration, public outreach, project management and control tasks. .

ILLINOIS-BASED OPERATOR ADVANCES IN CATERPILLAR CHALLENGE

KOMATSU’S NEW CORPORATE CAMPUS IN MILWAUKEE RECEIVES TOP AWARDS

Fabick Cat announced that Illinois-based operator Keith Hollenkamp of Gelly Excavating & Construction has won the first-round competition in the 2022/2023 Caterpillar Global Operator Challenge.

Komatsu recently received awards recognizing the company’s newly completed office building project in Milwaukee, Wis. Komatsu’s 180,000-sq.-ft. office building is part of a new corporate campus nearing completion.

AGGREGATE PRODUCTION & RECYCLING SECTION

MB CRUSHER HEAVY EQUIPMENT COMBATS MATERIAL SHORTAGES

CAT MH3026 OFFERS HIGHER PERFORMANCE, LOWER COSTS

CASE HOLDS TEAM RUBICON TRAINING WITH CASE POWER & EQUIPMENT

TOMRA STRENGTHENS POSITION IN WOOD RECYCLING SEGMENT

McCann Industries held a used equipment open house at its Bolingbrook, Ill., facility on May 12. McCann offered customers a chance to expand their fleets by offering event-exclusive prices on used machines.

In preparation for disaster response, Case Power & Equipment of Florida and Case Construction Equipment provided equipment and attachments to disaster response organization, Team Rubicon’s Disaster Training Camp.

METSO OUTOTEC ELIMINATES PROCESS WATER DURING SCREENING

MOBIREX MR EVO2 NOW COMES WITH SPECTIVE CONNECT

SANDVIK MAXIMIZES UPTIME, LOWERS OWNERSHIP COST

MODULAR MINING, IMMERSIVE LAUNCH SIMULATION SYSTEM

BOBCAT COMPANY INVESTS IN ASSEMBLY PLANT IN ROGERS, MINN.

GEORGE WILLER JOINS MCCANN AS DIRECTOR OF PRODUCT SUPPORT

Bobcat Company announced plans for a new assembly plant in Rogers, Minn., a northwest suburb of Minneapolis-Saint Paul. This investment will add an additional 225,000 sq. ft. in production capacity.

McCann Industries Inc. announced it has hired George Willer as director of product support. Willer brings several years of industry experience to this newly created position.

MCCANN INDUSTRIES HOLDS USED EQUIPMENT OPEN HOUSE

FOLEY EQUIPMENT WELCOMES KIRK HAY AS CHIEF INFORMATION OFFICER

FREY & SONS CONDUCT EQUIPMENT AUCTION IN HOLLAND, OHIO

Foley Equipment announced the addition of Kirk Hay as new chief information officer on May 9. Hay will lead the dealer’s information technology, business intelligence and cyber security operations.

Frey & Sons Auctioneers held an auction for the excess equipment and fleet update program of Crestline Paving and Excavating, as well as equipment from additional area contractors in Holland, Ohio, on May 19.

NPK INTRODUCES SALERNO AS DIRECTOR OF SALES

ROSEN/BUDDY BARTON AUCTIONS HOST SALE IN CLEVELAND

NPK Construction Equipment announced the appointment of Chris Salerno to serve as director of sales. He will be working extensively with the sales and marketing team along with NPK dealers.

Rosen & Company, in conjunction with Buddy Barton Auctioneers, held a heavy equipment, commercial trucks, trailers and support equipment along with collectable automobiles in Cleveland on May 20.

CRISTIANI BUILDS BUSINESS WITH GORILLA HAMMERS INVENTORY

Once a small excavating company with a fleet consisting of a dump truck and small tractor back in 1971, the Dan Cristiani Excavating Company Inc. has developed into a multi-million-dollar family of businesses. Founder Emeritus (1930-2021) Edwin M. McKeon Sr. Midwest Publisher Joseph S. McKeon Executive Publisher Teddy McKeon Editor In Chief Craig Mongeau Senior Editor Robby Chakler Editorial Assistant Katherine Petrik Production Mgr. John Pinkerton Controller Judith Nixon Circulation Mgr. Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

COMING AUCTIONS BUSINESS CALENDAR

EQUIPMENT

16 32 42

HUSQVARNA HEPA Dust Extractors FECON 135VRT Mulcher KENWORTH PACCAR TX-18, TX-18 Transmissions

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

Ritchie Bros. Auctioneers announced that its wholly owned indirect subsidiary, Ritchie Bros. UK Holdings Ltd. (“RB Purchaser”) is discontinuing the Phase 2 review by the UK Competition and Markets Authority (the “CMA”).

78 84

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

RITCHIE DISCONTINUES ACQUISITION ATTEMPT OF EURO AUCTIONS

DEPARTMENTS

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 5

Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers WE ARE HIRING!

2018 GRADALL D152

$215,000

STK# ZZ18177, 28 HOURS, EAU CLAIRE, WI

2017 KOMATSU PC240LC-11, STK# KM21091, 2600 HOURS, SPRINGFIELD, IL

2014 WIRTGEN W220

$349,500

2015 KOMATSU 931.1

2013 KOMATSU 931.1

$200,000

2019 KOMATSU PC238USLC-11, STK#

STK# WG20047, 3851 HRS, SPRINGFIELD, IL

STK# VT20025, 10652 HRS, ESCANABA, MI

$199,500

2016 KOMATSU PC138USLC-10, STK#

KM2021739, 2618 HOURS, BOLINGBROOK, IL

2015 KOMATSU D155AX-8

$349,500

2020 KOMATSU PC210LC-11 $239,500

$124,500

$169,500

2017 KOMATSU D65PX-18

STK# KM20131, 5474 HRS, DEPERE, WI

2016 KOMATSU D61PX-24

$189,500

STK# KM19412, 4,882 HRS, DEFOREST, WI

2014 KOMATSU PC360LC-10$199,500 STK# KM19566, 3893 HRS, SPRINGFIELD, IL

$199,500

STK# KM17233, 3983 HOURS, BRIDGETON, MO STK# KM2022040, 682 HOURS, EAST PEORIA, IL

KM2021749, 1781 HOURS, SPRINGFIELD, IL

2015 KOMATSU D61PX-24

$275,000

STK# VT19025, 7,957 HRS, ESCANABA, MI

$219,500

STK# KM19457, 4037 HRS, PALMYRA, MO

2015 KOMATSU PC228USLC-10, STK# KM2021516, 4061 HOURS, SPRINGFIELD, IL

$149,500

2019 KOMATSU PC210LC-11, STK# KM2022030, 151 HOURS, PALMYRA, MO

$239,500

2004 KOMATSU HM300-1

17 Roland Branch Locations in IL, IN, MI, MO, and WI

Used Sales (217) 789-7711

$149,500

STK# KM17369, 10,978 HRS, CAPE GIRARDEAU, MO

V I S I T R O L A N D M A C H I N E R Y . C O M

Page 6 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mike Garrard • (630) 492-9115 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110 2018 Takeuchi TB260, 1128 Hours, S/N 126103636, Cab/Air/Heat, Aux Hydraulics, Hydraulic Thumb, 24” Bucket, Backfill Blade, Rubber Tracks ..................................$65,900

2019 Case TV450, S/N NJM453706, 1214 Hours, Cab/Air, High Flow, 2 Speed, E-H Controls, Hyd Coupler, 84” GP Bucket, Just Serviced ..........................................$74,900

2020 Case CX80, 627 Hours,Cab/Air, Dozer 2020 Takeuchi TL8R2, S/N 408000393, Blade, Rubber Track, Hyd Thumb, Tag Cab/Air, 76” GP Buckets ..................$58,900 Coupler, 24” Bkt ..............................$99,900

McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800

2017 Case TR270, Cab/Air, 2 Speed, Coupler 72” GP Bucket, New Door, Like New Tracks ..............................................$46,900

2020 Case TV450, S/N NKM471154, Cab/Air, High Flow, 2 Speed, E-H Controls, Hyd Coupler, 84” GP Bucket, Just Serviced .. ........................................................$78,500

2016 Case TV380, S/N NGM419929, 2161 Hours, Cab/Air, High Flow, 2 Speed, 84” GP Bkt....................................................$51,500

2015 Case 580SN WT, S/N NFC723066, 5587 Hours, 4x4, GP Loader Bkt, Case Mechanical Q/C (rear), 36” & 24” Backhoe Bkt, 16” trench Bkt, 4 Lever, E-Stick, Serviced ..........................................$49,900

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Schereville* 219-865-6545

Michigan Marne* 616-371-7250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 7

Roadtec RX-700 - ‘12 w/5000 Hrs., 7’2” drum, ROADTEC RP190 - ‘13, approx.. 6200 hrs. grade & slope controls, #C001978 ....$197,200 EZIV Carlson screed, Moba grade & slope controls ......................................................$58,900

SAKAI SW770HF - ‘17 w/approx. 1550 hours, 67” drum, tier III Isuzu engine, fleet machine .. ..........................................................$69,450

PAVERS / ROAD WIDENERS

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

EXCAVATORS

Liebherr A904C Wheeled Excavator - ‘16, 10-19’ screed w/12” ext, #C001909 ....$55,000 approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” P.O.R. items may be on rent causing pricing stick, QC66 coupler, aux. hyd ................$P.O.R. and hours to vary. Roadtec RP190 – ’13, 5860 hrs, Carlson EZIV

CRUSHING AND SCREENING

BROOMS

ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ Superior DT74J - ’20, approx.. 600 hrs. AC, ..........................................................$161,700 side shift, #C002327 ............................$63,700 Pioneer FT4250CC – ’17, approx.. 2700 hrs, 18’ feeder, dust sp, 4 bar....................$486,000 Pioneer FT4250CC - ’15, approx. 2400 hrs., 18’ MILLING MACHINES feeder, dust sup, 3 bar........................$475,000 BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor......................................$174,000

ROLLERS

BOMAG BM1200/35 - ‘15, 1150 Hrs, 4’ Drum, Sakai SW770HF - ’18, new machine, 67” high 3’ Also Available, Front Conveyor, #C000846 .... frequency roller, Tier III emissions Isuzu engine, C001399 ............................................$115,900 ..........................................................$298,000 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900

*Comes with any remaining standard and 3 year extended power train warranty.

Contact Chuck or Jason in Illinois

1-800-307-0221

crhodes@finkbiner.com jzeibert@finkbiner.com

www.finkbiner.com

GROVE RT880E – (’15), 29.5x25 tires, 3,932 hrs, C001718...$399,500

GROVE RT880E – (’14), EROPS, 4,018 hrs, C000895...$389,000

2019 GROVE GRT655L – (’19), 486 hrs, C003873…$CALL

MANITOWOC 11000-1 – (’19), NEW, 20 hrs, C003846...$CALL

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000

CRANES GROVE RT650E, (’14) 50-Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$319,000 GROVE RT765E-2, (’14), 65-Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ............................................$CALL GROVE RT880E, (’15), 80-Ton, Cummins QSB6.7L (Tier 4) turbo-charged six cylinder diesel, 41’ to 128’ 4 section full-power synchronized Megaform boom, #C001718 ..........................................................$399,500 GROVE RT880E, (’14), 80-Ton, Cummins QSB6.7L (Tier 4) turbo-charged six cylinder diesel, 41’ to 128’ 4 section full-power synchronized Megaform boom, #C001236 ..........................................................$374,000 GROVE TMS900E, (’05), 90-Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ..........................................$CALL

LOADERS AND EXCAVATORS: LIEBHERR L556 2PLUS2, (‘11) Enclosed ROPS w/AC, 4WD, 188hp Liebherr D934S A6 four cyl. diesel, rear camera, 4.58 cu. yd. bucket with bolt-on cutting edge, “2 plus 2” wheel loader, #15360 ....................$114,438 LIEBHERR LR636, (‘18) 3.25cyd bucket w/teeth & segments. Front and rear aux. hydraulics for 4 in 1 bucket, winch or ripper. 3 year/6000 hour full machine warranty, #C001745 ....................................................$249,700 LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R936 LC, (’19), EROPS w/ AC & Heat, auto lube, rear camera, 54” bucket, #C004148 ..........$CALL SAKAI SW354, (’18), #C003395 ................................................................................................................$CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Matthew Pehler at:

mpehler@amstate.com or mobile 1-414-719-8700 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ohio, Kentucky to Improve Brent Spence Bridge Corridor

Brent Spence Bridge Corridor rendering

The project includes the addition of a companion bridge on the west side of the existing Brent Spence Bridge.

The joint ODOT and KYTC project team also has been working with engineering firm HNTB to evaluate potential opportunities to reduce overall costs of the construction project through a value engineering process.

The Brent Spence Bridge Corridor (BSBC) improvement project is hitting another milestone as the Ohio Department of Transportation (ODOT) requested proposals from consultants to support contract administration, public outreach, project management and control tasks necessary to manage the eventual design-build project. The selected consultant will be comanaged by a joint team within ODOT and the Kentucky Transportation Cabinet (KYTC). “Our team has been busy working with our counterparts in Ohio to ensure we are ready to move forward once funds are awarded,” said KYTC Secretary Jim Gray. “We have already taken many of the important steps necessary for a project of this size and scope that start long before the first shovel is placed.” Brent Spence Bridge Corridor rendering “These next key steps move us ever closer to unlocking the real potential of the I-71/75 The Brent Spence Bridge Corridor project includes improvements to approximately corridor for this region, our two states and 8 mi. of highway. our country,” said ODOT Director Jack set aside for projects that are so large that traODOT, KYTC Continue Marchbanks. “The request for a pre-procureditional funding and grant mechanisms are Preparations, Apply for ment consultant and these next steps are very not an option. Federal Grants important as we ramp up to getting this The Kentucky General Assembly recently The joint project team within ODOT and much-needed project built.” The Brent Spence Bridge Corridor project KYTC has already been working on secur- passed and Gov. Beshear signed a budget includes improvements to approximately 8 ing property, preparing an initial financial bill that included funding required to fulfill mi. of highway and the addition of a com- plan, coordinating with utility companies, state match requirements for large projects. panion bridge on the west side of the existing meeting with stakeholders and a host of The state of Ohio is actively developing its Brent Spence Bridge. This additional capac- other activities, including applying for fund- financial strategy, which will be included in the grant application to be submitted by May ity will alleviate congestion, improve safety ing. 23. After Ohio Gov. Mike DeWine and and open up this nationally significant “We’re working closely with ODOT on freight corridor, which carries an estimated 3 Kentucky Gov. Andy Beshear signed a percent of the nation’s GDP annually. memorandum of understanding on Feb. 28, this application to position the project to Current plans also call for the separation of the bi-state project team began preparing an secure every available federal dollar,” said local and interstate traffic, which will application to support this $2.8 billion proj- Stacee Hans, KYTC BSBC project manager. improve access to local businesses and com- ect through the federal Multimodal Projects “With the full backing of both states' leaderDiscretionary Grant, which includes funding ship, our collaborative team in place, and the munities in Covington and Cincinnati.

work we’ve done to prepare for construction, we feel we will have a compelling application.” Value Engineering Effort to Be Completed By Mid-June The joint ODOT and KYTC project team also has been working with engineering firm HNTB to evaluate potential opportunities to reduce overall costs of the construction project through a value engineering process. This work seeks to identify ways to deliver the project at the lowest possible cost without sacrificing safety, quality or environmental attributes. The project team completing this work also takes into account the federally-required process completed in 2012 that considers potential environmental impacts. “It’s very important in our current efforts that we confirm the previous decisions that were made through careful and thorough public engagement and environmental analysis in order to keep the project moving forward,” said Stefan Spinosa, ODOT BSBC project manager. “We will continue to pursue cost-saving measures and ways to improve the project that will be consistent with our targeted timeline to begin construction by the end of 2023.” Contractor Outreach to Take Place The joint project team will provide opportunities in the coming weeks for all firms interested in this historic project to ask questions, provide input to the process and meet with ODOT and KYTC personnel to learn more about the details. For more information, email BSBProcurement@dot.ohio.gov. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 9

The Bobcat® L23 small articulated loader is small enough to fit in small lots, backyards and other tight jobsites.

New Bobcat T76 Track Machine with Diamond 60” Tree Cutting Head

New 15-ton E145, Bobcat’s Largest Excavator in Stock with full line of all Bobcat Excavators on site and ready to rent or own.

New Bobcat Commercial & Residential Mowers in Stock!

Largest Selection in the Midwest!

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines

Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

New In Stock Bobcat MT100’s

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators

Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Farm-Rite Dassel Farm-Rite Willmar Farm-Rite St. Cloud Farm-Rite Long Prairie

Authorized Bobcat Dealer U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281 19612 US-71 • Long Prairie, MN 56347 866/514-0982

www.farmriteequip.com

Page 10 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 (8) Sheepsfoot, 48" and 60", double drum & single approx 7,000 hrs, good condition . . . . . . . .$147,500 drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 BACKHOES Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500 MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, 9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500 Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

Grapple Buckets in Stock -Call For Your Needs FORKS

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 11

CALL INDUSTRIAL SALES 866-372-7368

RUN

WITH THE BEST IN

USED EQUIPMENT: QUALITY, EXPERIENCE & SUPPORT

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4 –GH18

JD 672G, Air, 14’ Blade, #241218 ..................$149,000

JD 650K, LGP, 28” Pads, JD 470GLC, 36” Pads, 12’ 10” Warranty, #244573 ................ Arm, #241312 ........$189,000 ................................$129,000

JD 770G, 14’ Blade, Aux Hyd, JD 450K, LT, Ripper, 105” JD 710K, 4x4, Ext hoe, Aux #243472 ..................$145,000 PAT, #261171 ..........$149,000 Hyd, Warranty til 8/2023, #235517 ..................$109,000

JD 750K, LGP, 34” Pads, 156” JD 135G, 9’ 11” Arm, 24” Pads, #249203 ........$119,000 PAT, Winch, #261247.............. ................................$189,000

JD 744K, Joystick, Ride, Dual Diff Locks, #250267 .............. ................................$198,000

JD 772G, Scarifier, 14’ Blade, #244201 ..................$152,500

JD 750K, LGP, 34” Pads, 156” JD 644K, JRB QC, 3rd Spool JD 310SL, Air, 4x4, Ext Hoe, #261164 ....................$84,000 PAT Blade, #248916 .............. Aux, #234435 ..........$149,000 ................................$194,000

JD 300GLC, 10’ 2” Arm, Aux Hyd, Warranty, #248936 ........ ................................$209,000

Bomag BW177D-5, 66” Smooth Drum, #247755 ........ ..................................$62,500

JD 850K, LGP, 168” PAT Blade, Winch, #241906 .......... ................................$199,000

JD 650K, LGP, 128” Blade, 4 Function Aux, #241074.......... ..................................$94,000

JD 160GLC, Hyd Thumb, Harlo HP6500, 4x4, 21’ Mast, Coupler, 28” Pads, #251594 .. #241789 ....................$47,750 ................................$159,000

Page 12 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Illinois-Based Operator Advances in Caterpillar Challenge

(L-R) are Jeré Fabick, chairman, CEO and dealer principal, Fabick Cat; Kelli Fabick, equipment management digital solutions manager, Fabick Cat; Josh Froese, winner of the Dozer 500 event; Shane Bakken, 4th place overall; Keith Hollenkamp, 1st place overall and winner of the Fabick Cat Open event; Wade Weinel, 3rd place overall; Travis Gillespie, 2nd place overall; Brandon Eggemeyer, winner of the Tire Track Stack event; and John Fabick IV, president, Fabick Cat.

abick Cat announced that Illinois-based operator Keith Hollenkamp of Gelly Excavating & Construction has won the first-round competition in the 2022/2023 Caterpillar Global Operator Challenge. With the win, Hollenkamp advances to the regional semi-final round of the competition, which will occur in Raleigh, N.C., in October. The Global Operator Challenge overall aims to test the skills and precision of equipment operators as they prove their excellence in operating Cat machinery along with their ability to master any piece of heavy equipment safely and efficiently. This first-round local event hosted by Fabick Cat included three different challenges with three separate pieces of equipment — the Fabick Cat Open with a 310 mini-excavator; the Tire Track Stack with a 289D3 compact track loader; and the Dozer 500 with a D2 dozer. Challenging and robust, the group of operators who par-

ticipated had to prove they had mastered a broad assortment of machines to qualify for the next round. In addition to Hollenkamp’s impressive win that qualifies him to represent Gelly Excavating & Construction and Fabick Cat at the regional semi-finals, the dealership also recognized each individual event winner and the runner ups of the overall challenge with plaques during an awards ceremony. John Fabick IV, president of Fabick Cat, spoke to the group as the awards were handed out. “It’s an honor to host so many experienced operators here today. Each and every one of you are winners in my book — you all made this a tremendous event,” he said. Following the regional semi-final competition in October, nine finalists will emerge from around the world and participate in the finals at the ConExpo-Con/AGG event in Las Vegas in March 2023. The winner of the finals will receive an all-expenses-paid trip for two to one of Caterpillar’s facilities worldwide.

About Fabick Cat For more than 100 years, Fabick Cat has employed and served the hard-working men and women that improve the quality of life in the community. From Cat machines that help maintain infrastructure and support our farmers, to aerial lifts and emergency power generation, Fabick Cat supplies the essential products to help make progress possible. As the Cat dealer of portions of Missouri, Illinois, the entire state of Wisconsin and the Upper Peninsula of Michigan, Fabick Cat operates in 37 locations across the territory. Members of the Fabick family’s third, fourth and fifth generations are currently working together under the active leadership of Jeré Fabick, as chairman, CEO and dealer principal along with John Fabick IV serving Travis Gillespie of Gillespie Excavating in Springfield, Mo., waits his as president. turn to run the Cat 308 excavator. For more information, visit FabickCat.com.

Gary Zarbo of St. Louis competes in the Fabick Cat Open station with the Cat 308 excavator.

Josh Froese of Baxmeyer Construction, in the cab of this Cat 308 excavator, tries his operating skills at the Fabick Cat Open.

About Caterpillar Caterpillar Inc. is one of the world’s leading manufacturers of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, Caterpillar has been helping customers build a better, more sustainable world and is committed and contributing to a reduced-carbon future. Caterpillar does business on every continent, principally operating through three primary segments — construction industries, resource industries and energy and transportation — and providing financing and related services through its financial products segment. For more information, visit caterpillar.com.  (All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.) see FABICK page 84

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 13

#92948 | 2017 BOMAG BW138AC-5, 1200 HOURS ..........................................$39,500

#83458 | 2018 KOMATSU PC240LC-11, 2,650 HOURS ........................................$192,500

#52188 | 2017 KOMATSU PC55MR-5, 1,388 HOURS ..........................................$65,500

#3673 | 2018 BOMAG BW161AD-5, 530 HOURS ............................................$89,500

#3626 | 2015 BOMAG BW177PDH-5, 975 HOURS ............................................$72,500

#3543 | 2011 BOMAG BW190AD-4HF, 2,750 HOURS ........................................$69,500

#93130 | 2016 KOMATSU D39PX-24, 3800 HOURS............................................$92,500

#93129 | 2014 KOMATSU WA320-7, 3RD VALVE | 9000 HOURS ......................$84,500

#93134 | 2014 JOHN DEERE 350G, 8303 HOURS............................................$84,500

#52386 | 2019 KOMATSU PC170LC-11, 650 HOURS............................................$169,500

#92926 | 2013 KOMATSU PC490LC-10, 8750 HOURS | AUX HYD | QC ................$99,000

#83432 | 2019 KOMATSU PC240LC-11, COMBO HYDRAULICS, QC ........................$CALL

#93141 | 2012 KOMATSU PC400LC-8, 11 FT STICK, 10,200 HOURS ..................$79,500

#93145 | 2009 KOMATSU PC160LC-7E0, 7051 HOURS............................................$49,500

#93142 | 2011 BOBCAT S100, BUCKET | 1179 HOURS ..........................$19,500

#52302 | 2018 KOMATSU PC360LCI-11, 1350 HOURS........................................................$CALL

Page 14 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113

GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449

www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 15

2020 CATERPILLAR 259D3, ID # VUC0042, SN CW902948, 679 HOURS ..........................................$73,600

2019 CATERPILLAR 226D, ID# UUC0561, SN HRD04076, 1837 HOURS ..................................$39,900

2020 CATERPILLAR 299D3XPS, ID# VUC0146, SN DY901672, 2890 HOURS ..........................................$84,900

1999 JOHN DEERE 250, ID# UGU0184, SN KVG250A150154, 1913 HOURS ..............................$26,500

2019 CATERPILLAR 239D, ID# VUC0005, SN BL903425, 2265 HOURS ............................................$52,500

2019 CATERPILLAR M320F, ID# UUC0586, SN FB200552, 585 HOURS............................................$225,800

2011 CATERPILLAR 304DCR, ID# VUC0100, SN TYK00187, 2145 HOURS ..........................................$39,900

2017 CATERPILLAR 308E2CRSB, ID# 22B004, SN FJX07451, 1550 HOURS ............................................$98,000

2018 CATERPILLAR D6TLGP, ID# UUC0539, SN JML00450, 1863 HOURS ..................................$383,500

2007 CATERPILLAR 963C, ID# UUC0469, SN BBD02873, 9865 HOURS ..........................................$72,400

2018 CATERPILLAR D9T, ID# VUC0053, SN REX00543, 3586 HOURS ............................$1,070,600

2018 CATERPILLAR 980M, ID# UUC0631, SN KRS02983, 14052 HOURS ......................................$249,500

2013 CATERPILLAR 735B, ID UBU0175, SN T4P00397, 12,713 HOURS ..............................$197,000

2018 CATERPILAR 745-04, ID# UUC0483, SN 3T600519, 5748 HOURS ..................................$505,200

2011 CATERPILLAR 160MAWD, ID# SUC0037, SN M9K00206, 7335 HOURS ................................$169,300

2008 CATERPILLAR RM300B, ID# UUC0537, SN BWR00387, 4326 HOURS ......................................$269,400

Page 16 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KANSAS CITY • JOPLIN • WICHITA TOPEKA • GARDEN CITY

Husqvarna Introduces New Range of HEPA Dust Extractors

816-241-9290 www.VLPCO.com

SALES • PARTS • SERVICE

CASE 821G T4B

CASE 621G T4B

CASE 580SN T4B

New CASE SV208DSM Padfoot Roller

2021 CASE 850M

2021 CASE TV450B, NEW IN STOCK

2021 CASE 580SN, NEW IN STOCK

2021 CASE 2050M, NEW - 1 LEFT

Created to complement projects with grinders, power cutters, drill motors and other light construction equipment, the five dust extractors in the range, including two battery-powered models, are designed to contribute to a healthier working environment while increasing productivity.

Throughout 2022, Husqvarna Construction will launch its new range of versatile HEPA dust extractors. Created to complement projects with grinders, power cutters, drill motors and other light construction equipment, the five dust extractors in the range, including two battery-powered models, are designed to contribute to a healthier working environment while increasing productivity. “On any construction job, dust is the enemy. It can harm machine operators. It can cause problems with equipment. And it can have a negative effect on working efficiency. With our new dust extractors, you can immediately take a major step towards creating a better working environment for yourself and your colleagues,” said JoakimLeff Hallstein, global director product and service management of concrete surfaces & floors at Husqvarna Construction. Husqvarna’s new versatile HEPA dust extractors feature the new e-flow technology that enables continuous high performance. A redesigned filter cleaning mechanism also ensures the cleaning process can be done simply by closing the inlet and pressing a button. Also, a cost-efficient, improved LONGOPAC dust bag attachment system in combination with long filter lifetime delivers low cost of ownership. Christofer Swahn, global product manager, said, “New filter technology enables higher productivity through reduced downtime and all five models in this new range comply with the latest HEPA standards for heavy-duty dust extractor usage. They are also equipped with EN1822 certified HEPA 13 filters. At the same time, the machines

offer compact design and smart features such as e-flow technology, improved HMI for easy on-site trouble shooting, fast hose connection, an integrated inlet cap and a smart dust cap that helps reduce exposure to dust.” Lightweight yet robust construction, ease of maneuverability and lockable wheels make moving between sites and floors simpler and safer with less strain on the operator — and it’s this focus on improving working conditions for the operator that is a key characteristic of the new range. The new range includes two battery-powered models (PACE and i-series) that offer the same features as corded models with the extra convenience of cordless operation. As well as making them quick to set up and start using, no power grid connection is required, optimizing working time and versatility. Together with a comprehensive series of accessories and Husqvarna Fleet Services including geo-location info, predictive maintenance and wireless updates, Swahn believes that the all-round benefits of the range represent true business value. “Versatility is something our construction professionals appreciate. These machines are ideal for multiple applications, which reflects user demands perfectly. They also understand the difference a high quality, ergonomically superior dust extractor can make to their working day. Consider these points and we believe our new HEPA range will strengthen our position as a total solutions provider.” For more information, visit www.husqvarnacp.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 17

Contact Rollie Aspenson at 608-220-1723 rollieaspenson@ brookstractor.com

See our entire used inventory at www.brookstractor.com Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Sparta • Plover (Stevens Point) • Mt. Pleasant (Racine) 2018 JOHN DEERE 324G

2018 JOHN DEERE 850K Smartgrade w/Warranty

Stk #C97971, EH Controls, High Flow, Power QT, 2 Speed, Bucket, 1248 Hrs ..$49,000

2020 JOHN DEERE 1050K Warranty Included

Stk #U365016, U Blade, Single Shank Ripper, Power Pitch, Hyd. Pin Puller, 28" Pads, 2382 Hrs ........................................$425,000

REMU WL180

2019 JOHN DEERE 624L Warranty Included

Stk #U323148, Cab/AC, Smart Grade, 168" PAT Stk #C97352, Cab/AC, High Lift, 3 Spool, Blade, 30" Pads, 4827 Hrs ..........$299,000 Coupler, New Tires, 4661 Hrs ..$189,000

2020 JOHN DEERE 672G

2018 KOMATSU PC138

2015 JOHN DEERE 524K Warranty Included

Stk #C94572-8, CAB/AC, Coupler, 3rd Valve, GP Bucket, 2275 Hrs ..............$129,000

2019 JOHN DEERE 160G LC

Warranty Included

Stk #C97297-2, Cab/AC, 14' Blade, 6WD, EH Stk #U051326, Cab/AC, Aux. Hyd, Rubber Stk #C95892, Cab/AC, 10'2" Stick, Aux. Hyds, Controls, 17.5 Tires, 411 Hrs ..$359,000 Pads, Blade, Coupler, 24" Bucket, 2216 Hrs .. Hyd. Coupler, Bucket, 1298 Hrs $185,000 ..............................................$139,000

2012 JOHN DEERE 333D

2013 KOMATSU D51PX

2018 DYNAPAC CC5200VI Warranty Included

Stk #C92461, Remu Dirt Pulverizing bucket Stk #C97748, Cab/AC, EH Controls, Wide Stk #C98118, Cab/AC, 24" Pads, PAT Blade, off 921F Case, JRB 418 Interchange.............. Track, Power QT, Bucket, 2416 Hrs ................ 6132 Hrs ..................................$99,000 ................................................$17,500 ................................................$45,000

2021 BOBCAT S76

2020 HITACHI ZX350

Stk #CC5200AA, 77" Double Drum, Temp. sensors, Drive lights, 395 Hrs ..$119,000

2001 JOHN DEERE 550H

2007 JOHN DEERE 325

Stk #C98021, ROPS, LGP, 24" Pads, 115" Blade, 18,099 Hrs ....................$32,000

Stk #C97991, Cab/AC, Foot Controls, Power QT, 2 Speed, Bucket, 4272 Hrs ..$23,000

Warranty Included

Stk #C97917, Cab/AC, 2 Speed, Power QT, EH, Bucket, 99 Hrs ....................$65,000

Stk #U940824, Cab/AC, Long Arm, Aux. Hydraulics, Coupler, 492 Hrs ....$329,000

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Page 18 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SETT TING THE

STANDA A ARD FOR B O OM TRRUCK For 75 yearss, National Cran ne boom t e trust and confidence of o to earn the thanks to their t durability, class-lead c ange of available and wide ra e accesso National i Cra ane boom trucks arre available i > Stand-up models m with capacitiies from 10 U > Swing seatt models with capaciities from 30

www.man nitowoc.com

5920 North Lindbergh Blvd. Hazelwood, MO 63042 314-895-9500 www.patkelly.com

Bobcat Company Invests in Assembly Plant in Rogers, Minn. Bobcat Company announced plans for a new assembly plant in Rogers, Minn., a northwest suburb of Minneapolis-Saint Paul. This investment will add an additional 225,000 sq. ft. in production capacity and enable the company to streamline efficiencies across its manufacturing footprint in the Midwest region. In addition, the company plans to add more than 100 new, full-time positions at this location in 2022. “This investment further demonstrates our commitment to our presence in Minnesota, while supporting the growth we are experiencing in the marketplace,” said Mike Ballweber, president of Doosan Bobcat North America. “We are dedicated to continuing to expand our capabilities and equipment product lines to empower our customers, and this new location will be an important part of this success.” Bobcat anticipates the new operation — located at 19850 Diamond Lake Road South on 22 acres in Rogers — will be fully operational by fourth quarter of 2022. The

Business Wire photo

Bobcat will add a new entrance to west side of the building at 19850 Diamond Lake Road South in Rogers, Minn.

facility will offer assembly space, shipping and receiving docks, employee parking, breakroom, offices and meeting rooms. The location in Rogers, a growing suburban community in Hennepin County and the sevencounty Twin Cities metropolitan area, is ideal given the benefits of its unique location at the intersection of two regional roadway sys-

tems — Interstate 94 and Highway 101. This location will allow Bobcat to optimize manufacturing logistics by streamlining the company’s supply routes alongside other locations in the region, as well as create supply efficiencies that support both market demand and the company’s vigorous growth plans. The addition of the Rogers facil-

ity will contribute to the company’s strategic manufacturing footprint plan and support its investments in facilities across North America, including a recent $26 million expansion at its facility in Litchfield, Minn., and $70 million expansion in Statesville, N.C. These efforts are part of Bobcat’s long-term strategic growth initiatives as a leading

equipment manufacturer and supports its long-term commitment to employees and communities. “We will continue to invest in our facilities, employees and manufacturing capabilities, so we can meet the future needs of our dealers and customers, while continually enhancing excellence across our business,” added Ballweber. The company plans to ramp up the hiring of new, full-time employees over the next 18 months. An initial emphasis will be placed on hiring qualified material handlers, assemblers and warehouse associates for both first and second shifts. These positions offer competitive pay, comprehensive benefits packages, initial and ongoing training and the opportunity for career advancement roles. A job fair recruiting event will be held on May 25, from 7:00 a.m. to 5:00 p.m. at the Hampton Inn at 13550 Commerce Blvd. in Rogers. Registration is not required, and all area job seekers are welcome. For more information, visit www.bobcat.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 19

563-8 872-4 41112

Bellevue (Dubuque), Iowa sales@jjjscheckel.com

2016 CA AT D11T Rebuild - $1,485,000 , 2019 CA AT 336 Next Geen - $288,000 ,

2018 CA AT M3188F - $238,000 ,

(3)2015 CA ATT MH H3059’s - $348,000 , EA.

2017 CA CAT 972M - $248,000 ,

3,700 Total hours, 1,486 Idle hours, h A ili y Auxiliary Wheeled excavatorr,, 475 totaal hours, Aux A hy hydraulics, d M i l handlers, Material h d 10,500 Hours, high high idle idl hours h . In Process. Zero Z Hourr,, CAT CAT AT certified ifi d PPow wertrain rebuild b ild 9,376 total fraame hours, h 5,117 hours h at idle, dl 4,259 ” Hy tilt Ground access high B w/ 4 yearr,, 6,000 hr warranty.y U Blade, SSS Ripper pp r,, 100% hydraulics, 2D Grade control. 10’66”” Stick, 54””Bucket, Variable adjustable j boom,, 8’6”” Stick, 60””Hyd g rise cab, 325 HPP,, 35’’ Boom, 29’ Stick, S Actual workingg hhours, 6.25 yard GP bucket, Documented Documented history,y, Very clean machine. bucket, k Outriggers, O i P h bl Push blade, d Super S clean machine. Setup for grapple l or magnet. 130,000 lbs. History. N UC. Excellent history. Available Suummer 22022. New hi ry,y, Low ili histo L utilization machine.

2017 CA AT 972M - $2488,000

Agg ggrega g te Handler pack p age g , 8,714Total frame hours, 44,631 6331 HHours at idle. idl 4,083 4 083 0 Actual workkingg hours, 6.25 Ya hi Yard GP bucket, Documented history.

((2)2016 ) CA ATT 725C’s - $2488/268,000 , 66,400-7,850 400 7 850 Total T frame hours, ≈ 3,000 Idle Idl hours, h 3,896-4,643 Actual oper p atingg hours. Good tires, Original condition, di i Matching M hi pairi aavailable.

((6)2007 ) CA ATT 631G’s - $ Call

4 have 5,800 5 800 hours h each, 2 have 9,000 hours each. Like new drive tires. Meticulouslyy maaintained, Straight & clean, none nicerr.. Avail. A il August 1st.

B POWERTRAIN PLUS REBUILDS

2015 CA ATT 972M - $238,000 $ ,

2016 CA AT 950M M - $168,000

2015 CA AT 9950M - $168,000

8,876 Total frame hours, 2,783 Hours H at idle. dl 6,093 Actual workingg hours. 100% New N Radial Tires, 6.25 Ya Yard GP bbucket. k Documented History.

A03057. 5,887 Hours, 2,106 Idle hours, h 3,781 Actual workingg hours. Matchingg Bridgest g one tires, 4.5 Ya Yard GPP bucket, O b k Original l paint, i , DDocumented history.

A03058. 4,940 Hours, 2,229 Idle hours, h 2,711 Actual workingg hours, Matchhingg Bridgestone tires, 4.5 Ya Yard GP bucket, O l paint, D history. b k Original i Documented

2018 Volvo A25G - $298,000 ,

2015 CA AT 836K K - $458,000

2007 CA AT 826H 8 - $288,000 ,

4,350 Hours, Excellent radials, Tailggate, Original g l paint, 1 Year factoryy Warrantyy remaainingg, 8,275 Total T l hours, 9,800 Hours on Compl pllete Dealer D l Rebuild. R b ld Good G d used Dealer inspec d 3388 ho p ted and pr p esssure tested, 2,937 at idle, onlyy 5,338 hours iin oper p ation. Service compac p tor w/ fullll m maintenance i & service history. as goodd andd clean history since new. Excellent Cl ready to work. E ll feet, Cleaan cab, Tested to OEM specs. Excellent l as they come. E ll ffeet. Clean,

2019 Volvo L260H - $288,000 ,

7,320 Hours, 2,333 Idle dl hhours, 9.5 Ya Yardd GP bbucket, k Ride control, 8775 Radial tires, Dealer maintained, Documented history,y, Super clean.

2011 CA AT 140M VHP - $248,000 ,

Verified 735 tootal hours, 451 Idle Idl hours, h Only ly 284 i id actual workingg hours. From state DOT,T, Store inside. dM Mid-mount id Scarafier V Ripperr.. Tier 3. 14’Moldboard,

2015 Case IH Steiger g 620 6 Q Quadtrac 2017 Case IH Steig ger 580 Q g Quadtrac 2014 Case IH Steiger S g 580 Q Quadtrac 2016 Joohn Deere 9570RX & S p Pkg$518 000 K-Teec 1228 Scrape S per PkgPkg $598,000 $598,000 K-Teec 1228 Scr Pkg $588,000 $588,000 K-TTeec 12333 Scraper & KK-Teec 1228 Scraper Pkg P $518,000 S raper p Pkgp Pkgg $468,000 ,

3,900 Hrs H on Quadtrac, Q d 100% NNew tracks k . 2012 28 yardd 2,4000 Hours H on the h QQuadtrac d c, Extr E emely ly clean, l Factory 2,4500 Hours H on the h QQuuadtrac, d E emely Extr ly clean l & wellll 4,800 Hrs, H Excelle E llent tracks, k 33 Ya Yardd scraper p r,, Very V y clean. l Eject scraperr.. maintained. NEW 2022 28 yardd Ej Eject scraperr.. Dealer tested & inspected. 1 owner wellll maintained. Eject scraperr.. Extremely clean & weell maintained i d units. warranty,y, New tracks. NEW 2022 28 yard Ej i d

RENT OR

ADES R HOLMES SMOOTH DRUM ROLLERBL

B UY !

NEW! Ready to ship!

9 & Deere 2015 K-TEC C 1233 - $1448,000 , (3)2014 ) XQ300 Generators - $$24,000 , Ea. Holmes 11F - $28,50 , 0 / 16F - $34,500 2017 John Deere 9520RX 36 YYaard capacity p y pul p lll scraperr,, very nicce & clean. l 7 500 HHours, 300 KW, 7,500 W Bothh single i l & 3 Phase Ph po p werr,, 2 Models, 11’or ’ 16’’ cutting i g width. Made in i Iowa. 2412DE Scraper p Pkgg $488,000 , 2006 CA ATT D10T Rebuild Inn Process Construction Low hour h use. We ha h ve a matching hi g pa pairi available. il bl 50 HP CAT A DDiiessell engine gi , Wea W ther thh & soundd pr p ooff i grade d , extreme dduty. For haul h l roadd & siti e 4,475 475 Hrs H , 24 YYaard scraper p r,, Extremely ly clean l andd wellll. - $998,000. , Zero hour Powertrain Plus, d r.. R pushh bl blockk. Rec R ommended o d d for 4000+ 00 HP Truck. enclosure, Trailer mounted, d Maintained i d by b CA CAT dealer lleveling li , compacting i & sealing li di dirt prior i to rain i event. maintainedd. Dealer l testedd & inspectedd w// full f ll hist hi h ory. Rear OEM CAT Warranty. New undercarr a aige g, U Blade, SS Ripperr,, Pre-emissioons!!

visit

c eckel.com JJSch

and watch w our new company viddeo!

The fastest growing w choice for

Large Equipm ment Rental

Delivered Nationwide. We are easy to work with & will not be beaat on price and terms! Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663-872-4112 63 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us ffoorr daily updates:

Page 20 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call fo or our full line of to ment! ough used equipm Check outt additional used eq quipment at bobcattent.com P RE-OW N E D, JOB R EA DY E Q UIPMENT NOW A V A AILAB LE !

2010 Bobcat S650, C/N 128410 ................................................$36,225

2020 Bobcat S76, C/N 119360 ..................................................$64,050

2020 Bobcat CT5555, incl FL9-5 loader & bkt, 120 hrs, 9’1” lift height. 4685 lb. operating wt., 75” wide, 94.2” high, 17.5 mph max. Full Factory Warranty through 6/28/2022. 55 HP, hydrostatic drive, PTO. Other attachments avail at add’l cost. CN 129005 ......$44,900

2018 Bobcat S595, C/N 130535 ..................................................$44,100

2014 Compactor HRV2000, Fits 24-65 Metric Ton Excavators, CN 90535 ........................................................................................$9,150

New AVANT 635, 130 hrs. demo machine, full factory warranty, over 100 attachments available at additional cost. Turf tires are easy on lawns for landscaping, golf courses or tree work. CN 107268 .... .............................. $53,000

2018 Bobcat E85, C/N 127977 $89,145

2018 Bobcat S650, C/N 130536 ..................................................$45,150

C i n c i nna n ti • Mt . Orab • H illiard • R eyn olds bu rg • Zan esville • L ex e x ing t o n • Lo uiss v ille

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 21

Page 22 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

McCann Industries Holds Used Equipment Open House

cCann Industries held a used equipment open house at its Bolingbrook, Ill., facility on May 12. McCann offered customers a chance to expand their fleets by offering event-exclusive prices on used machines, including skid steers, compact track loaders, wheel loaders and more. In addition, customers were treated to lunch courtesy of the Taco Truck and received swag bags. Guests also were able to talk to McCann staff, including Mike Garrard, used equipment manager. Garrard has more than 20 years of experience selling heavy equipment and rentals throughout Chicago and its suburbs.  CEG (All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.)

The guys from Artic Snow & Ice Control took time out for a picture with this race car, driven by Trevor Starek.

Ted Mazurski (L) of R. Olson Concrete Construction and Steve Roggeman, McCann Industries president, talk about updating Mazurski’s fleet. McCann had a variety of Case dozers and wheel loaders on the lot during the open house.

Sam Kukadia (L) of Material Solutions Laboratory spoke with Chris Petges of McCann Industries about one of the Case TV380 skid steers available.

Juan Hernandez (L) of Valley View School District and Steve Costello, McCann Industries sales representative, go over the details on this Case SV280B skid steer.

Jim McCann (back row L), CEO of McCann Industries, and all the technicians from the Bolingbrook facility enjoy some tacos at the used equipment open house.

Ray Sullivan (C) of McCann Industries welcomes Ivan Znika (L) and Juan Gonzales, both of Befesa, Chicago plant.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 23

Offering Big Discounts at Its Facility in Bolingbrook, Ill.

(L-R) are Patrick Miller of the Village of Plainfield; Steve Costello of McCann Industries; and Brian Fahnstrom of the Village of Plainfield. Plenty of wheel loaders were looking for new owners during McCann’s used equipment event.

Dennis Tovar (L) of McCann Industries met up with Pius Newell of Atlantic Plumbing at McCann Industries’ Used Equipment Open House.

John Novak (L) of Down and Dirty Services caught up with Ken Schmidt of McCann Industries. Jorge Rodriguez (L) and Tom Lawler, both of William Hach & Associates Inc., look over this Case skid steer.

(L-R): Steve Chambers of Chambers Excavating discusses the used equipment at the open house with Mike Garrard, used equipment manager of McCann Industries, and Jim McCann, CEO of McCann Industries.

(L-R): John Yanora of the Village of Harwood Heights; Ken Schmidt of McCann Industries; and Ron Maslo, also of the Village of Harwood Heights, in front of the Case TV 620B compact track loader.

Plenty of Case skid steers were available for customers.

Page 24 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hyundai leads the industry with great warranties and a trusted dealer network that will support you.

Midwest Blackhawk Equip *Compact Excavators Only

blackhawkequip.com Lake Crystal, MN 507-375-5544 Buck & Knobby Equip Co. buckandknobby.com Ottawa Lake, MI 734-856-2811 CSTK cstkequipment.com Kansas City, KS 888-566-5743 Diamond Equip diamondequipment.com Mt. Vernon, IL 618-242-2273 Evansville, IN 812-425-4428 Terre Haute, IN 812-299-4747 Bowling Green, KY 270-781-1061 First Choice Farm and Lawn firstchoicekubota.com Mayfield, KY 270-856-4355 G. W. Van Keppel vankeppel.com St. Louis, MO 314-872-8440 Hardings Heavy Equip hardingsinc.com Lowell, IN 219.696.8911 Hayden Machinery LLC haydenmachineryllc.com Springfield, MO 417-855-7057 Holbrook Equipment holbrookequipment.com North, Campton, KY 606-668-7261 J Gross Equip Inc. jgeinc.com Aberdeen, SD 605-229-4037

hceamericas.com ver. 0422-21

Midland Engine midlandengine.com Midland, MI 989-631-4608 Reco Equip, Inc. recoequip.com Belmont (Mt Pleasant), OH 724-696-4555 Columbus, OH 614-276-0001 Ft. Wayne, IN 260-255-3115 Monroe (Dayton Area), OH 513-539-5255 Toledo, OH 419-874-6001 Richfield, OH 330-659-0800 Florence, KY 859-727-7970 Indianapolis, IN 317-781-8100 Rueter’s rueterco.com Council Bluffs, IA 712-366-5221 Grand Junction, IA 515-738-2571 Carroll, IA 712-792-9294 Elkhart, IA 515-367-3054 Osceola, IA 641-223-8171 Sioux City, IA 712-266-3832 Neligh, NE 402-917-5604

St. Joseph Equipment, Inc. stjosephequipment.com La Crosse, WI 608-788-1775 Eyota, MN 507-545-2000 Team Boone teamboone.net Bardstown, KY 502-369-2475 United Truck Sales utsmi.com Clinton Township, MI 586-630-0355 Universal Truck Sales utssales.com Roseville, MN 651-639-0017 West River Equipment westriverequipment.com Mandan, ND 701-751-0995 Yes Equip & Services yesequipment.com Milwaukee, WI 414-263-9001 Madison, WI 608-243-9253

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 25

READY TO OUT-WEIGH THE COMPETITION

Hyundai wheel loaders come standard with an auto-weighing system that weighs accurately to within plus or minus 1%. With better payload management, you can operate more efficiently and maximize profitability.

hceamericas.com

Page 26 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

1981 Dresser TD7E 65 HP, International D239. Solid running machine. $18,000

618-435-2330 Benton, Illinois WWW.BRTRACTOR.COM

Foley Equipment Welcomes Kirk Hay as Its New Chief Information Officer Foley Equipment announced the addition of Kirk Hay as new chief information officer on May 9. Hay will lead the dealer’s information technology, business intelligence and cyber security operations. Foley CEO Ann Konecny said that Hay is joining the company during strong growth. “Our customers are busy across the board,” said Konecny. “And the strategic use of technology only continues to increase in importance to our customers in their operations. For our employees to deliver the very best every day, Foley’s systems and tools have to make it easy and efficient for them to focus on customers.” “I’m thrilled to be joining Foley,” said Hay. “There are very few more than 80-year-old companies where information technology and analytics so directly impact the business strategy and trajectory for continued growth.” Prior to joining Foley, Hay served as the CIO of Jack Cooper Investments.

Kirk Hay

Hay also has held a wide variety of technology roles in senior executive and management. As the pace of change in business only increases and disruptions of huge segments of the economy continue, Konecny said Hay’s combination of

strategic acumen and deep systems knowledge will be critical to the company’s continued growth. “Technology is one of the greatest ways to empower progress for our customers and employees,” said Konecny. “I look forward to collaborating with Kirk to strategically deliver the very best for our customers now and in the future.” About Foley Equipment Foley Industries — Foley Equipment, Foley Power Solutions, Foley Rental and SITECH Central — is in its ninth decade of empowering progress for Kansas and Western Missouri customers. Foley’s more than 1,100 employees strive to deliver excellence in service, parts, rental and sales across a broad line of Caterpillar and Allied Construction equipment and power generation, as well as SITECH construction technology solutions. For more information, visit FoleyEq.com. 

NPK Construction Equipment Inc. Introduces Salerno as Director of Sales NPK Construction Equipment announced the appointment of Chris Salerno to serve as director of sales. He will be working extensively with the sales and marketing team along with NPK dealers. Salerno has worked within the construction equipment industry for nearly 15 years. Most recently, he directed a sales team to develop a sales and marketing strategy within an exclusive dealer network for the United States, Canada, Mexico and Central America. Salerno is enthusiastic about taking on his new role with the NPK team. “I’m delighted to join the NPK team, a company that is well known for engineering high quality products and providing unmatched support,” said Salerno. “I look forward to working toward maintaining and enhancing relations with NPK’s solution-oriented dealer network.” NPK Construction Equipment Inc. was established in 1985 to serve the needs of the construction, demolition and mining industries in North and South America. NPK designs, manufactures, assembles and markets a wide selection of attachments, including hydraulic hammers, compactors, sheet pile drivers, concrete crushers, material processors, demolition shears and demolition grabs. The company also offers pedestal breaker systems. All attachments and pedestal breaker systems are offered in a wide range of capacities to meet the needs of any job. NPK has an extensive network of more than 350 distributor locations and a comprehensive field service force to ensure customers receive the best support. For more information, visit npkce.com. 

Chris Salerno

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 27

YU UP AD CEG-05/2 22 - LIFTING FORCE - Photo credits: Sémaphore - N No binding document

IT’S S AN EXCAV XCAVAT ATOR… A

MAKE YOUR O MOVE V TO MECAL A AC WWW.MECALAC.COM C

Iowa - South Dakota - Nebraska 515-967-5656 www.midwestundergrou undsupply.com

Wisconsin 800-242-9559 w www.lfgeorge.com

Minnesota 952-890-6000 www.trenchersplus.com m

Southern Inddiana - Kentucky 859-254-6443 www.wilsonnequipment.com

Page 28 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Attachments Pages 29-35

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Cristiani Builds Business With Gorilla Hammers Inventory

Cristiani Excavating Company photo

Dan Cristiani Excavating Company Inc. has developed into a multi-million-dollar family of businesses with more than 175 employees operating under the DCEC Holdings banner.

Once a small excavating company with a fleet consisting of a dump truck and small tractor back in 1971, the Dan Cristiani Excavating Company Inc. has developed into a multimillion-dollar family of businesses with more than 175 employees operating under the DCEC Holdings banner. Building the business based on principles of being honest and sincere with both customers and employees, founder Dan Cristiani has established an outstanding repCristiani Excavating Company photo (L-R) are Dan Cristiani, Danny Cristiani utation within Louisville, Ky., and surrounding community. and Chris Jackson.

The company provides excavation, directional drilling and utility services. Although he officially retired in 2020, Cristiani’s management style of “we’re all in this together” continues to define the company’s total teamwork approach. Impressive by any standards, the company’s growth has been more the result of an adherence to the founder’s focus on service rather than a desire to be bigger. “We never set goals to grow, we just meet our customers’ needs and do what we’re asked to do,” said Cristiani. “We

never have really said that we are going to grow this year — it just happened.” Cristiani’s approach has paid off and as a result, the company has grown 70 percent in the past five years. Now helmed by Chris Jackson and Dan’s son, Danny Cristiani, the company recently marked two very significant achievements. In 2021, the company celebrated its 50th anniversary while simultaneously reaching $50 million in business for its primary business entities, including Gotta Go Inc., an equipment and materials haul-

ing business founded in 1997 and Gotta Go Dumpster Service, founded in 2007. Dan Cristiani Excavating’s business consists of one-third residential infrastructure; onethird industrial commercial work; and one-third municipal work. The excavation aspect of the business encompasses earthmoving, land clearing, demolition and stormwater retention basin construction. Its utility construction work includes stormwater drainage systems, installation and repair of water see CRISTIANI page 34

Page 30 • May 28, 2022 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

building the best mobile shears since 1977

Company Wrench www.companywrench.com 4510 East 71st Street Headquarters: 4805 Scooby Lane NW Cleveland, OH 44105 440-439-4567 Carroll, OH 43112 740-654-5304 920 Deneen Avenue 866-262-4181 Monroe, OH 45050 513-402-7297

1330 KY-151 Frankfort, KY 40601 502-699-2681 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 28, 2022 • Page 31

Page 32 • May 28, 2022 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

Premier Manufacturer of Equipment Attachments from 2,500 lbs to 120,000 lbs EXCAVATORS • LOADERS DOZERS • SKID STEER LOADERS CTL’S • BACKHOE LOADERS

Buckets Grapples Compaction

Fecon’s New 135VRT Mulcher Features Design Improvements, More Horsepower Fecon’s 135VRT CTL, which is available through select Vermeer dealerships, features a 132 hp 3.8 L Cummins Tier IV Final engine that delivers 10 percent more horsepower than its predecessor 125VRT, while a 50 gpm auxiliary attachment flow provides 119 hp to the Bull Hog forestry mulcher or other attachments. A 16 gpm reserve allows full machine control without loss of attachment performance. Designed for use in the woods, this new model features all steel hoods, and standard cage guard and limb risers for greater protection and durability. A full forestry spec cab features ¾ in. polycarbonate front door and ½ in. polycarbonate side windows along with level 2 FOPS and a compete guarding package. A more spacious, comfortable operator station includes an 8-in. color display. There are no cross bars on the doors or windows, providing unobstructed visibility. Improved loader arm design also enhances attachment visibility. Equipped with a bite limiting rotor to maintain rotor RPMs, the 135VRT easily mulches material to 8-in. in diameter, according to the manufacturer. This new model features 4,150 ROC with integrated counterweight or hydraulic winch kit for improved balance with Fecon Bull Hog mulchers. A 52-gal. fuel tank allows nearly double the run time between fill-ups. Full coverage fuel tank guarding safeguards against damage while working, and improved sealing prevent debris ingestion.

Each 135VRT comes with a VM602SS Bull Hog forestry mulcher equipped with bite limiting rotor for a finer output while maintaining rotor RPMs. Rotor fitted with 30 carbide or double-sided tools.

Hinged belly pans and tilting cooler and condenser guards allow easier cleaning. Sealed fuse panels and improved wiring harness routing enhances durability. Each 135VRT comes with a VM602SS Bull Hog forestry mulcher equipped with bite limiting rotor for a finer output while maintaining rotor RPMs. Rotor fitted with 30 carbide or double-sided tools. For more information, visit www.Fecon.com. 

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 28, 2022 • Page 33

“Running equipment helps you know what you’re buying,” said Jackson. “Gorilla hammers offers excellent value, and their service and utilization are as good or better than higher priced hammers. Gorilla hammers hit hard.”

Can be featured on the models listed: CAT 328 329 330 336

HYUNDAI R290 R320 R360 R450

CASE CX290 CX300 CX330 CX350

JCB JS260 JS330

DOOSAN DX300 DX320 DX330 DX340 DX350 DX42DX450

Boyd & Son Machinery’s Brent Rhinehart and Dan Cristiani Excavating President, Chris Jackson.

HITACHI EX270 EX300 EX330 EX350 EX370

DEERE 290 300 330 350 370 450 790 792 892 990 992 KOBELCO SK260 SK290 SK330 SK350 SK400

KOMATSU PC250 PC270 PC300 PC308 PC300HD PC360 LIEBHERR R953 R932HD R942 R952HD LINKBELT LX240 LX290 LX330 LX350

SAMSUNG/ DOOSAN SE280 SE280LC-2 SE350 TEREX TXC300 TXC340 TXC420 VOLVO EC290 EC340B EC340

NEW HOLLAND EC270 EC350

GORILLA MODELS RANGE FROM 600 FT. LBS. TO 16,000 FT. LBS.

Page 34 • May 28, 2022 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Hammer Found Among Assets Proves Itself to Cristiani CRISTIANI from page 29

lines, sanitary sewer lines and utility directional boring. Gotta Go Inc. Trucking provides deliveries of rock from quarries and topsoil from job sites and transports sludge from sewage treatment facilities and equipment transport. Gotta Go Dumpster Service offers a full line of dumpsters from 10 yds. to 40 yds. delivered in the Louisville or southern Indiana area. Cristiani also was instrumental in developing the heavy equipment operator program at the Prosser School of Technology, the local vocational school serving public and private high school students of south-central Indiana. In 2003, Jackson, a graduate of the program found work at Dan Cristiani Excavating as a pipe laborer. Recognized for his hard work, Jackson was promoted to project manager/estimator. Through continued hard work and initiative, Jackson rose through the ranks and today, he is the majority owner and president of Dan Cristiani Excavating, Gotta Go Inc. and Gotta Go Dumpster Service. One example of the projects the company undertakes is the site development work they conducted at the 6,000-acre River Ridge Commerce Center in the Louisville metro area adjacent to the Port of Indiana on the Ohio River in Jeffersonville, Ind. The challenges at River Ridge share similarities with much of the company’s other work. “This region has the hardest limestone there is,” said Jackson. “All the good ground has already been developed so we’ve become accustomed to encountering limestone on almost every project. The River Ridge Commerce Center project involved major contour changes and throughout, the rock ranged from zero to four feet deep.” With work concentrated within a 50-mi. radius of Louisville, hydraulic hammers come in to play daily. “Get the biggest hammer for the job that you can find,” said Jackson. “We pull out the big hammers when we’re into limestone and use smaller hammers for demolition work.” The company had purchased hydraulic breakers from several manufacturers and were satisfied

Cristiani Excavating Company photo

Since the company acquired its first Gorilla hammer, it has continued to build its inventory of the brand.

Cristiani Excavating Company photo

“Gorilla Hammers offer excellent value, their service and utilization are as good or better than higher priced hammers,” said Chris Jackson, president of Dan Cristiani Excavating Company Inc.

Cristiani Excavating Company photo

Dan Cristiani

Danny Cristiani

Boyd & Son Machinery’s Brent Rhinehart (L) and Chris Jackson.

with their performance but have been extremely impressed with one manufacturer. When Cristiani purchased the assets of a local rental company five years ago, the equipment they acquired included a Gorilla hydraulic hammer. Putting the Gorilla hammer to work, the company quickly recognized its capabilities, robust construction and value. Jackson found that his background as a pipe laborer and crew chief provides keen insight and appreciation of quality equipment. “Running equipment helps you know what you’re buying,” said Jackson. “Gorilla hammers offers

excellent value, and their service and utilization are as good or better than higher priced hammers. Gorilla hammers hit hard.” For Dan Cristiani Excavating, the support they receive from an equipment supplier is as important as the equipment itself. “What we like best about Gorilla Hammers and our local dealer, Boyd & Sons Machinery, is the service we receive,” he said. “Boyd & Sons is a great partner, they’re a major part of why we continue to purchase Gorilla hammers.” Jackson has a great deal of respect for Gorilla Hammers’

Bobby Tedesco. “I work with knowledgeable people and Bobby has an incredible amount of knowledge about hydraulic hammers,” Jackson said. “He eats, sleeps and breathes hammers. He comes to our shop at least a few times a year to check in with us. If there’s an issue, he confronts it head on and makes it right.” Since the company acquired its first Gorilla hammer, it has continued to build its inventory of the brand. Currently, the company’s Gorilla Hammer lineup includes: • gxs1800- 13,500-lb. hammer • 2-gxs175- 12,000-lb. hammer • 1-gxs165- 10,000-lb. hammer

• 1-gx135- 5,000-lb. hammer For his part, Boyd & Son Machinery’s Brent Rhinehart appreciates working with Dan Cristiani Excavating Company. “They have a sterling reputation in this community, and it’s well deserved,” said Rhinehart. “In my dealings with them, they’ve always been extremely fair and straight-forward. Their word is their bond. I’m proud of the relationship Boyd & Sons Machinery has with their company and I look forward to outfitting their equipment fleet with top-quality Gorilla hammers well into the future.”  CEG

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 28, 2022 • Page 35

BQURIALIIN GIN NG ITY, INNOVA VATION, T AND SUPPOR S T

TOGE G THEER BRING SAFE ETY Y, INNOVA VAT TION & DURABILITY TO YOUR O JOB SIT TE ®

ESCO loader bu uckets are precision engine eered and ® y that prov p vides safer and feature the Ultralo ok tooth system easier tooth repla acement. Combined with premium p m materials ® e of the most durable, and skilled fabrication, ESCO delivers one high-performance e buckets available.

U a Ultra alok® Tooth o System

ear Parts ESCO O® Manganese Crusher We

Bucyrus y Blades ess™ Cutting Edgess a and Acce essories

816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 www.esco.weir

East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080

Roland Machinery Co. www.rolandmachinery.com Escanaba, MI Columbia, MO 906/786-6920 573/814-0083 Bridgeton, MO Palmyra, MO 314/291-1330 573/769-2056 Cape Girardeau, MO DePere, WI 573/334-5252 920/532-0165

DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710

Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

Trucks & Trailers

SECTION

Pages 36-43

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Volvo Trucks Announces Next Generation VNR Electric Volvo Trucks North America con- The Volvo VNR Electric provides tinues to lead in the deployment of excellent responsiveness, sustainable Class 8 zero-tailpipe torque and performance, emission vehicles for the North especially in the stopAmerican trucking industry with and-go operations of ongoing deliveries of its Volvo VNR urban goods movement Electric model to fleets across the and port drayage. country. The journey continues as the company announces that production of the enhanced Volvo VNR Electric model will begin in Q2 2022 and features an up to 85 percent increased range, faster charging and even more configurations for heavyduty transport. Volvo Trucks first began taking customer orders for its first Volvo A dedicated battery thermal management system (BTMS) VNR Electric model in December 2020, with commercial production starting in quarter two 2021 at the company’s was added to manage and maintain ideal environmental temperatures. Volvo Trucks also has introduced a new six-batNew River Valley manufacturing plant in Dublin, Va. Over the past year, Volvo Trucks has delivered the Volvo tery package option. Combining all three boasts an increased VNR Electric to customers in several states across the energy storage of up to 565kWh and offers an operational United States, collecting valuable operating data to continu- range of up to 275 miles. Regenerative braking energy is ally improve the technology to increase the efficiency of the captured and fed back into the system to maximize energy truck under varying operating conditions. The next genera- efficiency and driving range. The enhanced Volvo VNR Electric also reduces the tion Volvo VNR Electric is now open for order. “It is a testament to Volvo Trucks’ leadership that in a con- required charging time, as the 250kW charging capability tinuously evolving industry we are bringing the enhanced provides an 80 percent charge in 90 minutes for the six-batversion of our VNR Electric to the market a year after sales tery package and 60 minutes for the four-battery version, of the VNR Electric first started,” said Peter Voorhoeve, according to the manufacturer. Volvo Trucks has added two new configurations to its president, Volvo Trucks North America. “Volvo Trucks is at the forefront in the industry, always VNR Electric lineup — a 6x4 straight truck and a 6x4 tractor innovating and improving, while upholding the highest stan- — joining its three existing models: 4x2 tractor, 6x2 tractor dards in design, construction and safety. Our team is proud and single-axle straight truck. Each Volvo VNR Electric conof its role, together with dealers and customers, in accelerat- figuration is designed for applications and drive cycles with ing the shift to electromobility and a more sustainable local and regional distribution ranges, including food and beverage, drayage, and pick-up and delivery routes. future.” “Volvo Trucks is continuing to expand the capabilities of The enhanced Volvo VNR Electric’s true power lies in the improvements made in the battery – technology, design, the VNR Electric to make it more efficient, satisfy our cusmanagement and package offering. Improvements in battery tomer demands for expanded range, and provide a better design have resulted in an up to 40 percent increase in stor- driving experience,” said Andy Brown, Volvo Trucks’ product marketing manager of electromobility. age capacity for each battery.

“The electric driveline featuring a two-speed I-Shift transmission provides best-in-class, powerful, and smooth acceleration. Innovations such as Volvo Active Driver Assist and Dynamic Steering make driving effortless and precise, while at the same time improving safety.” Volvo Trucks is focused on supporting customers in their electromobility transition by expanding its network of Volvo Trucks Certified Electric Vehicle (EV) Dealerships that consult with fleets who are considering making the investment in the Volvo VNR Electric. The sales teams at Volvo Trucks EV Certified Dealerships are fully educated on guiding customers through the transition towards electromobility solutions and the service teams are trained and equipped to safely perform battery-electric truck maintenance and repairs. Volvo Trucks has certified dealers in California and New York and is working with numerous dealerships throughout North America to finalize their certifications. Volvo Trucks also has built a dedicated corporate salesforce to support dealers and customers, with electromobility district managers in place across the country. Funding and incentives are an important part of the total cost of ownership calculation for fleets deploying batteryelectric trucks, and Volvo Trucks helps customers leverage funding programs across North America. In addition, Volvo Financial Services offers complete financing and insurance solutions for the Volvo VNR Electric and charging infrastructure. Volvo Trucks introduced the Volvo Gold Contract in conjunction with the initial launch of the Volvo VNR Electric to provide peace of mind for new electric truck owners. Incorporating maintenance, towing, uptime services and full coverage of major components, the Volvo Gold Contract is the most advanced service contract available and comes standard with the Volvo VNR Electric. For more information, visit www.volvotrucks.us. 

ON THE JOB EVERY DAY! R Ove er a CENTUR U Y of bu uilding the h ver e y best heavy-dut y trailer ta s for o yo our hauling needs!

or more information or your clo osest dealer call :

80 00-441-9880

www.rogerstraile ers.com m Truck & Trailer Section sponsored by Rogers Bros. Corp

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2022 • Page 37

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

New Heavy Duty Side Dump Trailer by Bauer Built Mfg.

Now Exclusivley Available at Mid Country Machinery

BAUER SIDE DUMP FEATURES: • Hitch-style option: either AG (shown) or Gooseneck • 360-degree rollover hitch • Two trunnion pivot cylinders • Option to dump left or right side • Equal-displacement hydraulic suspension • All six hydraulic drum brakes

• Self-steer rear axle • Triple-axle design • Hydraulic jack • 40 ton/36 cubic yard capacity • 50k lb. rated hub and spindle (x6) • 750/45R26.5 floater tires

Page 38 • May 28, 2022 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Volvo Presents Keys of New Sleeper to Driver; Supports Special Olympics In acknowledgement of her many industry and community accomplishments, professional truck driver Carmen Anderson was presented with the keys to a new Volvo VNL760 70 in. sleeper specially wrapped to help raise awareness of Special Olympics. The handover event was held at the headquarters of America’s Service Line (ASL) in Green Bay, Wis., a private truck fleet of 200 heavy-duty trucks and 350 refrigerated trailers for whom Anderson is currently a company driver. In addition to being behind the wheel professionally for more than 21 years and logging more than 2 million accident-free miles, Anderson was named a Women In Trucking’s Top Women to Watch in Transportation in 2021. In 2019, the Wisconsin Motor Carriers Association (WMCA), a nonprofit trade association based in Madison representing commercial motor vehicle users, named her Truck Driver of the Year, the first woman to win the award not only in Wisconsin but in any state. Anderson has long been active not only in supporting Special Olympics, but in promoting highway safety as well via her service as a member of the WMCA Road Team. She also is actively involved in Truckers Against Trafficking, which works to quell human trafficking across the country, as well as the Trucker Buddy program, dedicated to helping educate and mentor schoolchildren via a pen pal relationship with professional truck drivers. Kriete Truck Centers, headquartered in Milwaukee, family owned and operated for more than 70 years with ten medium- and heavy-duty truck sales and service locations across Wisconsin, partnered with ASL in obtaining the new Volvo truck that Anderson will now be driving. David Kriete, president and CEO, serves on the board of Special Olympics Wisconsin (SOWI), which was established in 1972 to provide year-round sports training and athletic competition for children and adults with intellectual disabilities. Travis Stuckart, who has been a Special Olympics athlete for two decades and will serve as an athletecoach in softball for Team Wisconsin at the 2022 Special Olympics USA Games in Orlando, took part in present-

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711

Jenn Koss photo

Carmen Anderson, America’s Service Line professional driver, and the Volvo VNL760 that she’ll now be operating to help raise awareness and support of Special Olympics.

ing Anderson with her new Volvo truck at today’s event. Featuring Special Olympics branded graphics, the truck, with Anderson behind the wheel, will be featured in SOWI’s annual Truck Convoy, taking place on Sep. 17, 2022, with Kriete Truck Centers as the presenting sponsor: truckconvoy.org. “As a long-time supporter of Special Olympics, and all the professional truck drivers out there every day delivering life’s essentials, we at Kriete Truck Centers are thrilled to be part of this effort,” said David Kriete. “Carmen is a shining example of what can be accomplished through hard work and a commitment to serving others, values that are at the core of our culture at Kriete as well as Special Olympics.” The VNL760 features a Volvo D13 425 hp engine with Turbo Compounding and a Volvo I-Shift automated manual transmission, work-

ing seamlessly together to maximize fuel economy, lower emissions and reduce driver fatigue. Safety features include collision mitigation with lane deviation alert and a Rolltek seat with side curtain air bag. Long haul drivers like Anderson, often on the road for several days at a time, appreciate the vehicle’s numerous comforts of home, like a reclining bunk with memory foam mattress and refrigerator, the company said. “I’m honestly taken aback by all the attention, the chance to drive this beautiful truck, and the opportunity to further spread the word about all the great things Special Olympics does,” said Anderson. “Volvo is known for high performing, safe trucks with the latest technology, and we’re sure to get lots of envious looks from fellow drivers traveling America’s highways.” For more information about Kriete Truck Centers, visit www.krietegroup.com. 

5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700 455 West Ave. North West Salem, WI 54669 608-786-2644

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2022 • Page 39

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107

www.swanston.com 3450 W Main Ave. Fargo, ND 58103 800-369-0371 3915 Burdick Expressway E. Minot, ND 58703 800-210-8766 3327 E Fir Ave. Fergus Falls, MN 56537 218-739-4505

3300 Ogden Ave. Lisle, IL 60532 630-355-7150

www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362

600 Walnut Ct Rockdale, IL 60436 815-730-9011

3021 South 460 East Lafayette, IN 47905 765-477-6933

3110 Prairie Rd. Rockford, IL 61102 815-961-3160

1095 N Curry Pike Bloomington, IN 47404 812-333-9677

25166 State Road 2 South Bend, IN 46619 574-232-1461

3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576

3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160

Page 40 • May 28, 2022 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Battle Motors Picks T-Mobile to Connect New Software T-Mobile announced on May 9 that Battle Motors has selected the Un-carrier as the preferred provider of IoT connectivity and management for thousands of new Battle Motors battery electric trucks rolling off the Ohio-based production line. These trucks are getting smarter, due to Battle Motors’ all new factory installed RevolutionOS EV software, according to the company. Like consumer automotive, the commercial truck industry is moving swiftly to embrace EV technology. RevolutionOS, powered by T-Mobile’s nationwide network, delivers actionable data and information to drivers and fleet managers that they can use to enhance efficiency, safety and security, according to T-Mobile. As part of this long-term agreement, TMobile for Business will deliver 4G LTE connectivity to Battle Motors trucks for near real-time sharing of battery range and usage information; historic and near real-time location and trip data; timely preventative maintenance warnings; over-the-air software and firmware updates; and the truck’s full bill of materials, such as VIN-specific information, parts and manuals. Every new Battle Motors class seven and class eight heavy-duty EV truck — like those that haul garbage, dirt and freight —

will come with a factory installed, ruggedized digital instrument cluster that runs RevolutionOS. The power and reliability of T-Mobile's nationwide network, Battle Motors’ RevolutionOS, will let customers view and update critical information directly from the truck, or remotely from a desktop computer or mobile device, just by scanning a QR code. Additionally, T-Mobile Control Center will give Battle Motors the ability to view

meet industrial-sized challenges for years to come as their trucks’ capabilities advance and the demands on connectivity increase. TMobile is poised to push IoT to its full potential and catapult adoption — paving the way for new electric vehicle applications that rely on low-latency, high-speed data, and realtime location and proximity-based services. “Our primary focus has been on driving technology and innovation that gives our customers value and peace-of-mind when it comes to maintenance, efficiency, safety and compliance,” said Battle Motors CSO Paul Marsolan. “Together with T-Mobile, we’re able to merge analytics and operations to put rich, real-time decision-making data to work for our customers.” “While we continue to grow our business market share, it energizes us to work with forward thinking companies that demonstrate leadership in areas like sustainable commercial transportation,” said Callie Field, president, T-Mobile Business Group. “Reliable connectivity, management and support is central to Battle Motors’ mission, and we’re honored that they entrusted their trucks and their customers to T-Mobile for T-Mobile announced on May 9 that Battle Motors has selected the Un-carrier as the Business.” For more information, visit t-mobile.com preferred provider of IoT connectivity and management for thousands of new and battlemotors.com.  Battle Motors battery electric trucks rolling off the Ohio-based production line.

Dodge Ram Tough Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

Gas-2500, Ready for Plow

2 Ram 5500 4x4 108 c/a. please call for spec

2022 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change Zac Olson 952-818-4402 zolson@jeffbelzer.com

Adam Engdahl 763-313-8501 aengdahl@jeffbelzer.com

and manage the connectivity of their trucks. Battle Motors can easily accelerate deployment of their growing line of trucks with the automation and provisioning capabilities of T-Mobile’s IoT platform. Battle Motors will have near real-time visibility to all its commercial trucks with the ability to monitor network conditions and device behavior with T-Mobile Control Center. In the near future, Battle Motors expects to leverage the Un-carrier’s 5G network to

Felling Trailers Signs Floyd’s Truck Center as New Dealer Felling Trailers Inc. has signed Floyd’s “We are happy to be an extension of the Truck Center as an authorized Felling Felling Trailers team. Their expansive prodTrailers dealer. All Floyd’s Truck Centers uct line is an ideal paring to our existing sell and service Felling product lines, allowing us Trailers’ complete product to provide our customers line, consisting of more with the right trailer for than 240 models, ranging their transportation from 3,000-lb. light utility needs,” said Gillam. to 120,000-lb. hydraulic Floyd's Truck Center detachable gooseneck was founded in 1948 trailers. when Floyd Gillam startMike Pitts, Felling ed a small truck and farm Trailers’ Northwestern machinery repair shop in regional sales manager, Scottsbluff, Neb. Now in worked with Michael its fourth generation of Gillam, vice president of family ownership, Floyd’s sales of Floyd’s Truck Truck Center operates Noll, salesman, Floyd’s nine locations throughout Center, to familiarize their Marvin Truck Center Rapid City, S.D., sales team and get them location. Nebraska, Wyoming, acquainted with the South Dakota, and Felling products lines. Montana. Floyd's sells and services “We are excited to have Floyd’s Truck Freightliner, Western Star and Autocar Center as part of Felling Trailers’ dealer net- trucks along with Felling and several other work. It allows us to provide customers with top trailer brands. first-class sales and service support throughFor more information, call 800/245-2809 out their regional territory,” said Pitts. or visit felling.com. 

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2022 • Page 41

Pittsburg gh, PA Lancaste er, PA Hubbard d, OH Cincinna ati, OH

(412) 747-7777 (717) 569-4531 (330) 534-0082 (513) 874-4880

Daily REN NTALS & Long-Term m LEASING ! (412) 74 47-7777

New & Used Trailer Sales • Rental / Leasin ng • Financing • Servic ce • Parts

FLIP AXLES Qty 5 - XL 80 HDGM, 53'x102", 40-T To on Minideck, Hydraulic Classic Neck, 33'7" Clear Deck, 12" Loaded Deck Height, Accepts Both Flip Box and Flip F Axle.

2017 Magnolia Pole Trailer, 39'-67'. Unit # 5141

ip s Fl oxe ve H Fl We &

MATCHED GROUP O

Qty 18 - 2018 Fontaine 48'x102" Stteel Flats, Spring Slider, Winch Track. Unit #’s 5301-5321

Qty 4 - 2009 Ta albert Flip Axles, Air Ride e Suspension, Fits Double Drop Trailers. Unitt #’s 5339-5341

THREE (3) 60-TON BEAMS Qty 1 - Fontaine Magnitude M 60 MBMD, 28' Beam, Modular Connectiion at Rear, Painted Viper Red. Qty 1 - Standard Red

Qty 5 – New Fontaine Wo orkhorse 55 5LCC, 18” Deck Height, 26’ We ell, o/s Alum Wheels, Rear Lift Axle, Some w/ Wheel Covers, Both Red an nd Black. Qty 3 – New Fontaine Magnitude 55 5-To on Drop Side Rail, Rear Lift Axle, o/s Alum Wheels.

Qty 2 – New Fonta aine EQI Hydraulic Spreader. Qty 4 – New Fonta aine 55-To on Paver, 24’ Well, e Both Red and Blackk.

Qty 1 - Black

FONTAIINE DOUBLE DR OP EX XTEND ABLES

2008 Load King 40-To on Quad Axle Folding Neck, 21'4" in Well. e Unit # 4807

- MINI DECKS SQty 4 – Fontaine Renegade N12, 53'x102", 5 33' Well e 12" Deck Height.

2013 Doonan Dro op Deck, 53'x102", Air Ride Suspension, Two w Toolboxes, o Winch Track. Unit # 5113

2019 Kalyn Siebert 60-To on Lowboy, 59''x102", 30' Deck Flip Axle Connections at Rear, Hydrauliic Detachable Gooseneck, Dual Hydraulic, Front Lift Axle. A Unit # 5286

Qty 3 – New Fontain ne X20, 53'-74'x102", 34' We ell Closed, 60' We ell - Ope en, 40-To on, Mechanical Detach.

EXTENDABLES

EAGER BEAVER TAGS Qty 14 – New 20XPT, 20-To on, 21' Flatt Deck, Air Brakes with Spring Ramps (Qty 8 – with h Hydraulic Ramps) Both Red and Black. 2015 Fontaine Magnitude Extendable, 29'x 50'.

Unit # 4775

2020 Fontaine Magnitude Extendable, 29'x 50'. (Pictured)

Unit # 5075

Qty 8 – New 25XPL, 25-To on (Qty 4 – with w Hydraulic Ramps) Both Red and Black.

Qty 5 - New Eager Beaver B Pavers, 35 GSL-PT Hydraulic Detachable e Lowboys, 35-To on, 24' Deck, Air Ride. Qty 2 - New 35 GSL--BR, 35-To on, 24' Deck, Beaver Tail a.

We Rent & Lease all type es of Hydraulic Det tachable’s, Drop-d decks, Flatbeds, Sliiding Axles, Extendable (ﬂatbeds & double d drops) Dry Freight Va ans and more!

Page 42 • May 28, 2022 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Navistar Standardizes Telematic Devices On Class 6-8 Vehicles Navistar solidifies its commitment to a connected and data-driven future with the standardization of a factory-installed telematics device on all new builds of the complete Class 6-8 International Truck and IC Bus vehicle product portfolios, including electric models. This allows all stakeholders access to actionable vehicle data, enhanced capabilities with industry partners and further improved integration for upfitting capabilities with truck equipment manufacturers (TEMs). The factory-installed and warranted telematics device broadcasts data to OnCommand Connection, Navistar’s connected services platform, which aggregates vehicle health and performance data and turns that into actionable information. OnCommand Connection has more than 30 telematics partner integrations that allow for the platform’s unique open architecture to integrate with all makes and models of vehicles on the market. “Our goal is to provide a seamless customer experience,” said Scott Renier, VP and general manager, Connected Services and Analytics. “We first made OnCommand Connection standard on our Class 8 on-highway vehicles in 2018, providing those cus-

The factory-installed and warranted telematics device broadcasts data to OnCommand Connection, Navistar’s connected services platform, which aggregates vehicle health and performance data and turns that into actionable information.

tomers access to a full suite of connected products that help to improve uptime and lower their total cost of ownership. Extending the technology to all Class 6-8 International vehicles means we can now provide that same valuable service to all customers, regardless of fleet type or size.” The standard OnCommand Connection service package provides customers access to the following: • Over-the-air programming vehicle soft-

ware updates for approved engine calibrations and performance parameter updates to improve customer uptime by keeping vehicles on the road • Vehicle health monitoring that can help identify issues and allow customers to take the appropriate action • GPS and geofencing functionality that allows for asset tracking and protection • Access to the International 360 service communications platform that streamlines

the service scheduling process and allows customers to customize routine maintenance intervals based on vehicle usage. The data insights gathered are viewable through the OnCommand Connection and the International 360 portal via desktop or tablet, and will be available through a mobile phone app to be released later this year. The app will make the technology more accessible to smaller customers across all market segments. “Traditionally, people think connectivity and data analytics are only for big, over-theroad fleets,” said Mark Stasell, VP, Vocational Trucks. “That’s not the case. Navistar believes connected technologies benefit everyone. Connectivity is our future — it will drive numerous innovations near and longer term. There’s invaluable benefit to making data available to customers of all sizes and across all market segments.” The factory-installed telematics device is covered through a nationwide warranty and includes a five-year subscription to OnCommand Connection, providing customers access to actionable data and streamlined subscription services with Navistar’s gateway integration partners. For more information, visit www.internationaltrucks.com/connected-vehicle. 

Kenworth Introduces PACCAR TX-18, TX-18 Transmissions Kenworth introduced the PACCAR TX-18 and PACCAR TX-18 Pro automated transmissions for Class 8 heavy onhighway and select off-highway vocational applications. Both 18-speed transmissions build upon the efficiency of the PACCAR TX-12, which was designed to be the most efficient on-highway automated transmission. The PACCAR TX-18 offers additional capability for heavy on-highway use for applications, such as heavy haul transport. The PACCAR TX-18 Pro adds enhanced capabilities and unique features for extreme duty vocational applications and other select off-highway applications. The new transmissions are available with the Kenworth T680, T880 and W990 equipped with the PACCAR MX-13 and PACCAR MX-11 engines. Optimally engineered to operate with the PACCAR MX engine platform, the new TX-18 and TX-18 Pro transmissions maximize the full potential of all MX engine ratings, with maximums of 510 hp, 1,850 lb.-ft. of torque capacity and 140,000 lbs. of gross combination vehicle weight (GCVW). “Drivers will appreciate the versatility of the PACCAR TX-18 and PACCAR TX-18 Pro that deliver excellent lowspeed maneuverability. Both seasoned and new drivers will benefit from tailored configurations that help them get the job done, and new performance calibrations that expertly control transmission shift points,” said Jim Walenczak, Kenworth assistant general manager of sales and marketing. The new 18-speed ratio provides smooth shifting and consistent performance in a wide range of operating applications. The TX-18 has three reverse gears, and TX-18 Pro has six, which pairs well with deep axle ratios. Multiple reverse

gears allow for improved maneuverability around job sites. Both transmissions offer expanded high-capacity PTO functionality with an 8-bolt bottom mount and 4-bolt rear mount for a combined 160 hp capacity at 1,400 rpm. The transmissions are equipped with an internal oil temperature sensor. The sensor shows transmission temperatures on the in-cab 15-in. digital display and provides driver notifications in situations causing excessive temperatures. The TX-18 and TX18 Pro are standard with Kenworth’s driverfriendly column-mounted, right-hand shifter. The shifter places gear selection and engine brake controls at the driver’s fingertips for enhanced ergonomics, comfort and overall performance. On-highway maintenance intervals are 500,000 mi. or five years, and vocational intervals are 250,000 mi. or three years for the TX-18 and TX-18 Pro. The

transmissions utilize a maintenance-free clutch. The TX-18 and TX-18 Pro join Kenworth’s PACCAR transmissions lineup, which include the PACCAR TX-12 automated transmission for fuel efficient, on-highway applications and the PACCAR TX-8 automatic transmission standard on Kenworth’s new medium duty models. For more information, visit www.paccarpowertrain.com and www.kenworth.com. 

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 28, 2022 • Page 43

Prrof P ofes fes ssional ssional ssiona ssion ssio ssi iional onal nal all H Hau Ha au ule ulers uler ers rs s Trust rus ust stt A America me mer meri meric merica’ merica erica rica iica ca a’s B Bes Best e est stt B Bu Built Bui uilt il illtt Trailers railers ail aile ailer iilers il llers ers rs s Your ourr equi equ e eq q ipment qui ipment ipm ipme ipmen ment ent nt is i your ur business, business, bus busin busine busines business siness, iness, ness, ess, ss, s, ou ours our ours s is s to m mak ma ak ke sur su surre it it gets g get ge ets ts to to th the the e job jjob sit site site ever very ery tim er tiime. e Trust rus ust stt the tth he e exp e exper p ts ts at at T To ow owm owma owmas owmas mas as ster ste ster err to de d desig des design esign sign ign gn n a reliable, elia eliab eliabl eliable liiable, liable, able, ble, le, e,, long long-la longlong-l lo lon ong-la ng g la asting astin asti sting t ng ting g ttrra aile ailer iller iler e err ttha th hat ha at yo ou u ne never ve err ha have ve to to w wor wo worr o orr rrry abou ab a abo about. b bou ou ou out ut. ut tt.. Learn Lear Learn Lea Le arn rn more rn m mo o ore re e at at www w ww w ww w.towm .tttow owm o ow wmaster wm wm wma mast as ast aste ster ster err.com com co com om

Farm-Rite Equipment Inc. www.farmriteequip.com Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857

St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085

Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672

Diamond Equipment, Inc. www.diamondequipment.com Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428

Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061

2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747

Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100

Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273

McCann Industries, Inc.

Alta Equipment Company

www.McCannOnline.com

www.altaequipment.com

Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000

Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800

Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770

Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800

Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200

Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545

Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110

Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444

McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420

Marne 1064 Franklin Street Marne, MI 49435 616-371-7250

Bryon Center, MI 616-878-7450

Gaylord, MI 989-731-9988

New Hudson, MI 248-356-5200

Sterling Heights, MI 568-474-5063

Traverse City, MI 231-714-6210

Bloomington, IL 309-585-3800

Detroit, MI 313-394-1811

Spring Grove, IL 708-547-7300

Flint (Burton), MI 810-744-4840

Ottawa, IL 815-313-2070

Company Wrench www.companywrench.com

Ziegler CAT www.zieglercat.com 8000 County Road 101 East Shakopee, MN 55379 800-352-2812

1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002

13822 West Freeway Drive Columbus, MN 55038 866-982-5656

53 Harbor Drive Sioux City, IA 51111 800-342-1847

2225 255th Street St. Cloud, MN 56301 800-522-9469

4805 Scooby Lane Carroll, OH 43112 866-294-6103

16400 Brookpark Rd. Cleveland, OH 44135 866-294-6103

1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

920 Deneen Ave. Monroe (Cincinnati), OH 45050 866-294-6103

1330 KY-151 Frankfort, KY 40601 502-699-2681

Page 44 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TAKE IT ALL ON. POWERED BY INNOVATION.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 45

AUTHORIZED DOOSAN DEALERS

IOWA

ILLINOIS

RTL EQ UIPMENT 515-986-0262 doosandealers.com/Grimes

B O B C AT O F SPRINGFIELD 217-525-0349 doosandealers.com/Springﬁeld-IL

319-857-4045 doosandealers.com/Swisher

SARGENT ’ S EQ UIP & REPAIR SERVICE S 708-758-2062 doosandealers.com/Chicago-Heights

BROWN ’ S HE AV Y EQ UIPMENT 515-232-8456 doosandealers.com/Ames

KENTUCKY

B O B C AT O F M ARIO N 618-985-8920 doosandealers.com/Carterville

B O B C AT O F B O WLING GREEN 270-842-4253 doosandealers.com/Bowling-Green

847-844-4131 doosandealers.com/Gilberts

MISSOURI

B O B C AT O F S T. LO UIS 618-397-1847 doosandealers.com/Fairview-Heights

B O B C AT O F CO LUMBIA 573-886-9435 doosandealers.com/Columbia-MO

NEBRASKA

B O B C AT O F S T. LO UIS 636-240-9020 doosandealers.com/O’Fallon

B O B C AT O F O M AHA 402-895-6660 doosandealers.com/Omaha

636-225-2900 doosandealers.com/Valley-Park

CENTR AL NEBR A SK A BOBC AT 308-384-9222 doosandealers.com/Grand-Island

CENTR AL P O WER SYS TEMS & SERVI CES 816-415-6700 doosandealers.com/Liberty 417-865-0505 doosandealers.com/Springﬁeld-MO

OHIO

B O B C AT ENTERPRISE S 513-874-8945 doosandealers.com/Hamilton 614-863-1300 doosandealers.com/Reynoldsburg

ALTA EQ UIPMENT 440-439-4000 doosandealers.com/Oakwood-Village

925-606-2451 doosandealers.com/Hastings 925-606-2451 doosandealers.com/Kearney

NORTH DAKOTA

B O B C AT O F M ANDAN 701-663-0903 doosandealers.com/Mandan IRO NHIDE EQ UIPMENT 701-662-5331 doosandealers.com/Devils-Lake

KANSAS

INDIANA

620-765-3118 doosandealers.com/Garden-City-KS

B & W EQ UIPMENT 800-242-4819 doosandealers.com/Fort-Wayne

CENTR AL P O WER S YS TEMS & SERVICES 785-462-8211 doosandealers.com/Colby

785-825-8291 doosandealers.com/Salina 316-789-7370 doosandealers.com/Wichita

MICHIGAN

B O B C AT O F ANDER SO N 765-643-4222 doosandealers.com/Anderson-IN

B O B C AT O F B LO OMINGTO N 812-287-8042 doosandealers.com/Bloomington B O B C AT O F CO LUMBUS 812-775-1470 doosandealers.com/Columbus

C ARLETO N EQ UIPMENT COMPANY 888-380-6420 doosandealers.com/Byron-Center

B O B C AT O F E VANS VILLE 812-422-8200 doosandealers.com/Evansville

888-380-6420 doosandealers.com/Chesterﬁeld

B O B C AT O F KO KOMO 765-628-2800 doosandealers.com/Greentown

888-380-6420 doosandealers.com/Kalamazoo 888-380-6420 doosandealers.com/Saginaw

ELLENS EQ UIPMENT 989-436-8181 doosandealers.com/Ithaca

B O B C AT O F INDY 317-787-2201 doosandealers.com/Indianapolis B O B C AT O F INDY N O RTH 317-769-4946 doosandealers.com/Whitestown

231-825-2416 doosandealers.com/McBain

RONSON EQ UIPMENT CO . 219-696-5680 doosandealers.com/Lowell

WISCONSIN

MINNESOTA

SWIDER SKI EQ UIPMENT 715-623-4668 doosandealers.com/Antigo

L ANO EQ UIPMENT 952-445-6310 doosandealers.com/Shakopee

715-693-3015 doosandealers.com/Mosinee

THECO 763-263-0505 doosandealers.com/Big-Lake

701-772-5006 doosandealers.com/Grand-Forks

715-669-5255 doosandealers.com/Thorp

701-572-5050 doosandealers.com/Williston

715-258-3266 doosandealers.com/Waupaca 715-675-2391 doosandealers.com/Wausau

All-new -7 Series mini excavators are here. Not all dealers carry -7 Series mini excavators. Check with your local Doosan® dealer for availability.

Learn more at NA.DOOSANEQUIPMENT.COM

Page 46 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pages 47-61

Aggregate Production and Recycling Section For m ore inform ation on crushing,screening and recycling equipm ent,visitC EG 's W eb site atw w w.constructionequipm entguide.com .

MB Crusher Heavy Equipment Combats Material Shortages In the dictionary, the word “island” is defined as isolated and detached. Living on an island can be idyllic, but not for companies who oversee constructing and developing the island. Remote locations represent a series of exacerbated difficulties due to material shortages happening everywhere around the world. From Greenland, the largest island in the world, to the smallest one located off Alexandra Bay in upstate New York — dubbed the “Just Enough Room” Island — planning jobs can be stressful transporting materials is a laborious task. And not just getting it from the mainland to the location, but even within the island where roads are small or non-existent. No matter where you go in the world, roads are essential to help any populated area thrive. It’s not

an easy task to build roads, and it’s an even harder when it’s near impossible to acquire the materials you need. During these difficult times, MB Crusher’s units provide the help companies need. Excavators are the only machines capable of travelling to locations where roads don’t exist and help build those missing routes. Attaching one of MB Crusher’s units to an excavator helps transform your machine into a mobile jaw crusher. The crusher buckets turn demolished materials into reusable sub-base and help create the new roads. The difficult job of connecting remote locations to populated areas turns into an easy task and eliminates the need to purchase and transport the materials needed.

On Meganissi, a small island with a population of roughly 1,000 people, a BF90.3 crusher bucket was used to help build villas.

Idyllic Meganissi Island in Greece “If you build it, they will come,” is a quote from the film, Field of Dreams and also is the mantra for tourist destinations such as the Greece, where there’s a constant demand for rental properties for vacationers to use. On Meganissi, a small island with a population of roughly 1,000 people, a BF90.3 crusher bucket was used to help build villas. The unit, which was attached to a Caterpillar 329E, processed rocks and created the aggregates needed to construct the new houses. Due to the attachment, there was no need to bring additional machines or materials by boat. Using the crusher allowed the company to transform the

resources around it into a usable product, allowing it to avoid the material shortage.

the contractor to produce its own materials without ever leaving the job site.

Stockholm Archipelago in Sweden There are approximately 670,000 islands in the world. Some of the islands are near Antarctica, while others are unexplored territories. In Sweden, there are at least 267,570 islands. Although most of them are uninhabited and difficult to connect to the mainland. Stockholm, the capital, is built on an archipelago consisting of 14 islands. Once an MB-L140 crusher bucket was installed on a Case TR340, the skid steer turned into a portable crusher. The unit allowed

Demolition in Puerto Rico Versatility is another reason MB Crusher units are so popular on different job sites because they can process natural materials such as rocks, but also remains from demolitions. In Puerto Rico, where the old Costa Salud Aguada hospital was demolished, the crushed concrete was reused as the foundation for the new hospital. There’s always an easier way to finish a difficult task. A good strategy for any hard developmental project is to have an MB unit installed on your carrier. 

Once an MB-L140 crusher bucket was installed on a Case TR340, the skid steer turned into a portable crusher.

Page 48 • May 28, 2022 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Cat MH3026 Offers Higher Performance, Lower Costs

New front linkage offerings provide up to 42 ft. 8 in. reach allowing operators to move more material without repositioning the machine. The MH3026 also offers up to 20 percent greater swing torque to move more material faster.

Purpose built for reliable and efficient operation in waste and scrap metal applications, the new Cat MH3026 material handler design provides enhanced performance, low operating costs and improved operator efficiency. The advanced electrohydraulic system optimizes the balance of power and efficiency, improving cycle times to handle more material in the same amount of time, improving profit potential, according to the manufacturer. These Next Generation material handlers are powered by the Cat C7.1 engine, capable of operating on up to B20 biodiesel. Meeting U.S. EPA Tier IV Final emission standards, the engine’s maintenance-free aftertreatment system lowers operating costs and maximizes machine uptime. The choice between power and economy modes fine-tunes power requirements to the task at hand, offering up to 10 percent lower fuel usage than previous models without sacrificing machine performance. New front linkage offerings provide up to 42 ft. 8 in. reach allowing operators to move more material without repositioning the machine. The MH3026 also offers up to 20 percent greater swing torque to move more material faster. Heavy lift mode boosts lifting capacities to more efficiently handle heavy loads.

Allowing the boom to freely travel up and down without using pump flow, the standard SmartBoom allows the operator to focus on grapple control and have a smoother, more fuel efficient, cycle. A range of attachments and new reach options are available for varied applications to increase operating flexibility. Technology Now standard technologies on the Cat MH3026 material handler elevate operating protection. E-fence prevents the machine from moving outside operator defined parameters while Cab Avoidance helps the operator by preventing contact between the attachment and cab. By requiring a PIN code to start the engine, the new Operator ID inhibits the machine from unauthorized operation. Designed for Safe Operation Large tempered glass windows with small pillars on the reengineered cab design enhance all-around visibility and operating safety. Standard right-side and rearview cameras, upgradable to 360-degree vision, display video feed on the large in-cab touchscreen monitor to further enhance work area visibility. Thicker, high-impact and impactresistant windshields and roof windows meet EN356, P8B and P5A standards.

Large tempered glass windows with small pillars on the reengineered cab design enhance all-around visibility and operating safety. Standard right-side and rearview cameras, upgradable to 360-degree vision, display video feed on the large in-cab touchscreen monitor to further enhance work area visibility.

A ground-level shutoff switch stops all fuel to the engine and shuts down the machine. Preventing reverse oil flow in the event of an unexpected loss of hydraulic pressure, standard boom and stick lowering check valves keep the front linkage securely in place. All daily maintenance points are quickly accessed from ground level, while a new service platform with steps provides easy, safe and quick access to the upper service area. Reimagined Comfort Offering a choice between deluxe and premium designs, the new Next Generation cab features a joystick steering option, eliminating the steering column to improve forward visibility, legroom and ease of cab entry. Further facilitating cab entry and exit, the left-hand console tilts up. All controls are conveniently positioned in front of and within easy reach of the operator to avoid unnecessary movements. A larger, 10-in. high-resolution touchscreen monitor with jog-dial offers easy navigation of the intuitive operator controls. Different machine operators can store their specific joystick and preferred power mode settings, and the machine automatically recalls the settings based on the Operator ID. The MH3026 offers a maximum cab

height of 18 ft. 10-in. to improve loading and material handling visibility. Superior Serviceability Standard Product Link captures critical operating data such as location, hours, fuel usage, productivity, idle time, maintenance alerts and fault codes, which can be remotely accessed and tracked to boost fleet management efficiency. Lasting 50 percent longer than previous designs, the new hydraulic oil filter improves filtration and increases change intervals to 3,000 operating hours. New antidrain valves keep the hydraulic oil clean during filter replacement. All engine filters feature a coordinated 1,000-operating-hour change interval, and the new air intake filter with precleaner lasts up to 1,000 hours to reduce maintenance requirements. Operators conveniently track filter life and maintenance intervals on the in-cab high-resolution monitor. Eliminating the need for operator interaction, the high-efficiency cooling fan features a standard automatic reverse function to keep the cores clean, maximizing machine uptime. An optional vibrating cooling screen activates during reverse fan operation to further improve dust and debris removal. For more information, visit www.cat.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2022 • Page 49

Page 50 • May 28, 2022 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2022 • Page 51

www.aisequip.com m 33600 N Grand River Av Ave L i Lansing, MI 48906 48906 5177--321-8000

Sa aginaw 4600 46 00 AIS Drive Di Bridgepo ort, MI 4872 722 989-777779897-0090 Grand Rapids Travverse City Tr 600 44th Street SW 8300 M-7 -72 East G Grand Rapids, MI 49 49548 Williamsb burg, MI 4969 49690 231--2267 267-5060 538--22400 616-53 West We s Detroit Northeast Detroit 56 65555 55 Pontiac P Trail 65809 Gratiot Av Avenue New Hud dson, MI 4816 655 Leno ox x, MI 48050 248--4377--8121 586--7727 27--7502 502 800-4 45757-8121

www.butlermachinery.c y com 3402 36th th SStt SW SW Fargo, ND 58014 701--2280-3100 800--7726--77475 3630 Miriam A Avve Bismarck, ND 58501 701-223-0890 70 2803 I-94 Business Loop E Dickinson, ND 58601 701-4 70 4556-1400 1201 S 46th St Grand G d Forks, F k ND 58201 701--775 70 775-4 42238

1505 Hw H y 2, Bypass B E Minot, ND 58701 701-8 852 52-3508 4950 E Highwayy 12 49 Aberdeen, SD 5774 401 605 05-2 -225-6 62240 3601 Deadwood Av Ave N Rapid C Cityy,, SD 57702 02 605-34 422-4850 20571 Tru uck Stop A Avve Pierre e, SD 5775501 605-2 05-224-5400 2 3201 N Louise Av Ave Sioux Fa alls SD 57107 alls, 07 605--336-3010

www.centralsands.co om 4219 E 50th St • Des Moines, IA A 50317 800--2247 47-2400 • 515-964-8 8600

". 0* !.0."+*10/0.-,+/ *11) )(''&%$

30 0% more cap pacityy w pre-screen with

www.rbscott.com 1011 Short St • Eau Claire, WI 54 47701 715-832-9792

www.roadbuildersmachine ery.com y 1001 S 7th St Kansas City, KS 913-37711-3822 4115 S 90th St Omaha, NE 402-331-9 92200

5601 Fle etcher A Avve Linccoln, NE 402 02-3325 25-044 477 4949 Ju 49 uergen Rd Grand Island, NE 308-3384--2262 620

1303 S Chestnut St Norfolk, NE 402-316-4640

10/0.--, ,+/*11) )(''&%$*#",.!-" *, *" + " .* ". 0* !.0."+* 0- "- *&%('' *+0 "*+-! "-* , * *" ! " * . *,*( "+/* -" +-"" *, 0 *#0-* ' * "-*+, ,+ . *&", * !. * + , *, * "*+0 " 0- *#,+ .,."* *. -0! !. *, * -"+.* " .*+-! "-* - "* " !-" * *#!" *" + " + * "- +"*, *.-, 0-.,. 0 *,-"* , "*", * . *" ." "* "- +"* ,.#0- *. ,.*#0 * 0 *#0-*.-, 0-. * *0 "* "+"*0 *,* 0 * " *.-!+/ ) "*11) )(''&%$* * " .*! " *, *,* "+0 ,- *0-*."-. ,- *+-! "-* *+0 ,. 0 * . *0. "-* 10/0.--, ,+/* 0 "*+-! "- *, * +-"" *#0-* *+, ,+ . *, -" ,." * -0 !+. 0 0 .,+.* 0!-* ". 0* !.0."+* .- !.0-*0-* ",- * 0-"*,.* 0 -0! +0 0/0.-,+/

mogroup.com

Page 52 • May 28, 2022 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

TOMRA Strengthens Position in Wood Recycling Segment With Dedicated Team As a sensor-based sorting solutions provider with a dedicated team for the wood segment, TOMRA Recycling sets out to drive the development of waste wood recycling through technology and process improvement consulting for the industry. Advancing the recycling industry with its sensor-based sorting technologies and well-established partnerships with manufacturers of wood-based panels, TOMRA again taps into new opportunities by maximizing the use and recycling of waste wood. After its most recent market launch of a new deep-learning-based sorting application capable of separating wood by type, the company announced the establishment of an entire team focused on the wood segment. With a newly appointed segment manager, industry-savvy experts, waste wood application specialists and service key account managers, TOMRA is strategically investing in rapidly enabling the material recycling of waste wood and bolstering recycled content for the wood-based panel industry, the company said. New Opportunities in Waste Wood Recycling The primary use of recycled waste wood is currently in particleboard manufacturing. The wood-based panel industry aims to meet very strong market demand and improve product quality by increasing recycled content, resulting in a twofold benefit for the manufacturer. Recycled wood is up to 40 percent cheaper than virgin wood and generally dryer, which results in a significant decrease in energy consumption during the drying stage of the panel production. Jose Matas, segment manager wood at TOMRA Recycling, said, “The current market development offers a significant opportunity for wood-based panels manufacturers. Using highquality recycled materials allows them to produce superior quality woodbased panels, achieve higher yields and outputs while profiting from considerable cost reductions, preserving natural resources and decreasing CO2 emissions.” Despite the advantages of wood waste recycling and market trends, a lack of infrastructure impedes the sector’s development. Whereas Central Europe performs well in waste management

from collection to recycling and reuse, the waste wood market outside Central Europe is still in its infancy. A current view on the market reveals considerable discrepancies in segment maturity and opportunities for growth. Italy, for instance, collects approximately 2.2 million tons of waste wood annually, of which 63 percent is recycled and turned into panel boards. As a result, approximately 2.2 million tons of CO2 emissions are saved annually, positively impacting the country’s environmental credentials. Contrasting Italy’s high-performing system for waste wood collection and recycling, the European Union and the United States alone leave approximately 110.2 million tons of waste wood unrecycled. The figures show untapped opportunities that can be exploited when implementing holistic resource systems to effectively collect, sort and recycle waste wood. Unleashing Power of Sensor-Based Sorting The particleboard manufacturer’s quest to increase recycled content and promote sustainable wood management requires optimized processes and advanced technologies to recover pure material fractions from a waste wood infeed stream. Thus, recyclers and particleboard manufacturers are advised to invest in the respective sorting technology to keep pace with industry demands and evolve with the market. New sorting technology quickly adapts to changing waste compositions, increasing purity demands and recovering single fractions. Integrating a wood sorting solution in recycling and production plants enables them to separate non-processed wood and processed wood from complex mixed waste stream and use the purest materials to produce high-quality particleboard on an industrial scale. The ideal solution consists of two sorting systems, a high-throughput unit for removing inert material and metals and a modern optical sorter with an integrated deep learning technology to separate waste wood into different material grades. Since 2012, TOMRA has been sorting waste wood for high purity clean wood chips. With TOMRA’s XTRACT, recyclers and particleboard manufacturers can remove impurities like inert materials, metals, and glass

with x-ray transmission (XRT) technology and deliver outstanding purity levels for secondary raw materials, according to the company. A variety of wood-based materials, including engineered wood composites and polymers must be accurately detected and separated into single fractions when creating recycled wood content that meets manufacturing standards. Only wood chip products with the highest quality (Wood A) can replace virgin materials in the production of wood-based panels, hence a new solution had to be found. Always in the pursuit of advancing and optimizing solutions, TOMRA’s in-house team of industry experts, application engineers and software developers collaborated to develop a new deep-learning-based application to sort wood chips by type. Available as an add-on for the company’s high-performing AUTOSORT, GAIN is trained to detect, analyze and separate nonprocessed wood (Wood A) and processed wood (Wood B). Moreover, it identifies and completely separates the MDF among processed wood streams, therefore producing individual wood fractions of the highest possible quality for being used in the production of superior quality particleboards and MDF boards. Since TOMRA’s mechanics, sensors and software are developed in-house, customers profit from machines designed to work together as a highperforming system, enabling them to increase their overall yield and profits. Fabrizio Radice, vice president and head of global sales and marketing at TOMRA Recycling, said, “TOMRA is strongly committed to circular waste management. I am delighted that we extend our focus to the wood segment with a dedicated team that brings a wealth of experience and profound knowledge. “The team’s expertise combined with our latest technologies will help recyclers and particleboard manufacturers meet both market demands and exploit the full potential of their operation while minimizing environmental impacts. In the following years, we are going to invest a lot in this promising segment and aim to see that the waste of one company becomes a valuable resource for another, a scenario we support to become commonplace.” For more information, visit www.tomra.com/recycling. 

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640

West Chicago, IL 630-293-0606

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

Wauconda, IL 847-526-4255

www.atlasbobcat.com

Yorkville, IL 630-553-0150

1200 East Highway 13 Burnsville, MN 55337 952-894-0894 Now open Saturday 8am-12pm CST

588 Outpost Circle Hudson, WI 54016 715-531-0801 Now open Saturday 8am-12pm CST

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

Coming Soon! St. Croix Falls, WI www.tristatebobcat.com

Cincinnati, OH 513-874-8945

Reynoldsburg, OH 614-863-1300

Mt. Orab, OH 937-444-3865

Zanesville, OH 740-313-0087

Hillard, OH 614-876-1116

Lexington, KY 859-254-3936 www.bobcat-ent.com

Bobcat of Indy 2935 Bluff Road Indianapolis, IN 46225 866-442-3052

4489 S Indianapolis, Road Whitestown, IN 317-769-4946

2075 E CR 67 Anderson, IN 765-643-4222

2002 West 3rd Street Bloomington, IN 812-287-8042

www.bobcatofindy.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2022 • Page 53

EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATTCH FOR A BAN NDIT® FFrom roadways to right-of-w ways, lot clearing too road clearing, get your woork done faster and m more efﬁciently than ever beefore with Bandit® m machinery! Choose from diffferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonnstration nstration.

IN NTIMIDATO OR 15XP 1 Capacity 15” p ity tyy Hand-Feed Chiipper pp

LARGE EQUIPMENT DEALERS THE BEAST 2460XP Trrack Horizontal Grinder

Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255

MODEL B M BT BTC-300 Trrack Carri rier rie

M MODEL 3590XL W Whole Trree Chipper pp

IMPAK AKTO OR 250 Slow Sp Spe peed Shredder p

6750 750 Millbrook Rd. • Remus, M MI 49340 • 1-800-952-0178 FIND IN US ONLINE WWW.BANDITCHIPPERS.COM BANDITCHIPPERS COM

(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

MODEL SG-75 Trrackk Stump S p Grinder Gi d

www.lec1.com

Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Effingham, IL 217-717-4550 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer

Page 54 • May 28, 2022 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Metso Outotec Eliminates Process Water During Screening Metso Outotec will supply unique sustainable screening technology for an iron ore project in the Southern Hemisphere. The order value, which is not disclosed, has been booked in Minerals segment’s Q3 2021 orders received. The startup of the project is scheduled for the first half of 2024. The order for the product screening and scalping application covers 12 Metso Outotec BSE Series (Banana Screen Elliptical) tandem screens and 4 MF Series screens, all equipped with 305PS screening media. In addition, the contract covers Metrics monitoring system for screens, expert support and installation services. The need to reduce water in iron ore production and other minerals processing is a critical global challenge. The BSE Series screens enable iron ore processing even with higher natural moisture content without adding water. “We are pleased that the customer chose Metso Outotec for sustainable screening solutions for their process. The BSE screen is an outstanding option for their needs. The elimination of process water ultimately results in lower processing costs, increasing the

customer’s competitiveness and profitability in the iron ore global markets,” said Jouni Mähönen, vice president, screening business line, Metso Outotec. Results the customer can expect after implementation: • BSE Series screens enable elimination of process water in the screening process • 93 percent reduction of the plant’s overall water consumption and eliminates the need for tailing dams • Reduced energy consumption from the entire plant compared to the wet screening process: 18,000 MWh/year electricity saving • 30 percent increase in screening capacity compared to traditional screening • Increased safety during media change-outs using the unique Hammerless Attachment system • Reduced CAPEX due to the adoption of high-performing BSE screens Metso Outotec BSE screening technology is a Planet Positive solution. For more information, visit www.mogroup.com/ portfolio/bse-series/. 

MOBIREX MR EVO2 Now Comes With SPECTIVE CONNECT The intuitive operating concept SPECTIVE has also now been extended in the mobile impact crushers MOBIREX MR 110/130(i) EVO2 by SPECTIVE CONNECT. All relevant process information and reporting are now displayed on your smartphone without the operator having to leave and excavator or wheel loader, for example. The impact crushers MOBIREX MR EVO2 are the benchmarks of their class with regard to output and efficiency. The plants provide flexible application options in natural stone and recycling. Due to the operating concept SPECTIVE, control of the new plants has been even easier and very intuitive already since 2017, according to the manufacturer.

performance as well as the plant usage. These reports can be forwarded by messenger or e-mail. As a result, the complete process is transparent for the plant operator at any time.

New Functions for SPECTIVE CONNECT If a fault cannot be eliminated, SPECTIVE CONNECT generates a service report, which can be sent by messenger to the person in charge of technology or a Wirtgen Group service center. All operating hours, fault messages, etc., are available at a glance in a clearly arranged manner and rapid help is possible. The offline troubleshooting aids make it possible, among other things, for a repair technician or service memSPECTIVE CONNECT · ber to remotely support the machine Digital Application With Real The two new functions are available in the offline area and can be used free of charge without operator because he or she can also hardware. The app can be installed on iOS and Android smartphones. Added Value view the troubleshooting aids. The Diesel and urea fill level, fuel conoperator only needs to enter the fault sumption, plant performance, current gap interrupt the ongoing process. In case of a phone can be taken to the location of the code and the plant type. setting and a lot more important process malfunction, SPECTIVE CONNECT dis- fault that occurred and support the operator The two new functions are available in the data can be displayed at any time via the plays not only a fault, but at the same time, step-by-step with troubleshooting. SPEC- offline area and can be used free of charge dashboard. In most cases, operators no refers to the corresponding components TIVE CONNECT generates clearly without hardware. The app can be installed longer have to leave the driver’s cab or including troubleshooting aids. The smart- arranged reports on consumption and plant on iOS and Android smartphones. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2022 • Page 55

573-635-8700 • 888-972-2537 • www.rackersequipment.com

2021 MDS M518R Tracked Trommel, SR# M518R042107, 154 Hrs CALL FOR PRICE

2011 McCloskey 8-Man Pick Station, SR# 80632, 2135 Hrs CALL FOR PRICE

#610130 1995 Fiat Allis FR220 Rubber Tire Loader. with 16,000 hours & 26.5-R25 tires approx 80%. 4.5 yd bucket with bolt on cutting edge (needs to be ﬂipped). Good running loader.

2022 FAE PT-175 Tracked Carrier w/Mulching Head, SR# 00662, 12 Hrs CALL FOR PRICE

Coming In: Cat 980G Loader (2002) with 6.75 yard spade nose bucket and Cat 3406 engine (hr meter broken). Needs batteries, but good running machine.

NEW 2021 Morbark 40/36 NCL Drum Chipper, SR# 478-1252, 55 Hrs CALL FOR PRICE #410080 1984 Cat D3BZ Magnum Dozer. 8′ blade & new wide track undercarriage. 1046 hours. Recently overhauled, runs great #154006 "New" Aggretek portable wash plant w/ 6x20 3-deck screen and twin 36"x25' sandscrews complete with electric motors, electric box and starters, wire cloth, and NiHard shoes, all on a 3-axle chassis.

drockgrizzly.com • (715) 889-1175

DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510119 Furukawa HCR1500ED drill. approx 18,100 hours. 8.3 Cummins engine. Runs well, still in use. Well maintained. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.

RIPPER, 4”deck bars/RIPPER HD-5” deck bars, Our largest model designed for rip rap, shot rock, And large material. Bar spaces available 2”-30”

TR6 model, Our smallest model-designed for sub Compact tractors and other light duty Equipment. 2” minus ﬁxed bar

MR10 Model, 1-2 yd loaders. Adjustable bar and Cleaner option available. Removable cleaner for more sorting options

#310003 AMERICAN 5300 CRAWLER CRANE 8336 hours on Detroit 671 engine with torque converter. 36 pads with extendable side frames & 3 drums. U/C overall approx 70%. Comes with 100′ of 46S pin boom and pendants. 4 sheve point (1 – 40′ & 1 – 20′), Tag line with winder, boom stops, & air controlled.

HD Model, up to 5 yd loader. Heavy Duty grizzly bars standard. Cleaner option available, Removable cleaner for more sorting options

LR8 model, skid steers-mini excavators, Adjustable bar and cleaner option available, AB set up at 2”-adjustable in 1” increments

#161010 ANACONDA 42�X75� CONVEYOR. w/ JCB Ecomax IP 55kw Tier 4 Final 4cyl diesel engine. Has impact bed & 3 ply belt. Folding hyd head & tail sections #111075 Portable Portec/Pioneer SM3042 jaw plant Cummins C-N14 engine (runs good), 42"x16' apron feeder (good ﬂights), & 4x8 2-deck Mesabi w/ reversable 30" underconveyor, 36" undercrusher front delivery conveyor. All on a factory 3-axle chassis. Has onboard electric hydraulic pump & reservoir w/ controls to operate a 4-point hydraulic leveling system for fast set up with legs, onboard fuel tanks, operator platform & controls. Disassembled for transport, ready for work when re-assembled. Will need approx 100kw gen set for electric motors.

EARTHMOVING #410063-CAT D9H w/ EROPS cab w/ A/C, straight blade w/tilt. Single shank, 4-barrel ripper. 24" pads. FEEDERS U/C (overall approx 70%). Rebuilt engine, trans, #132015-Continental Gin 48"x25.5' apron feeder. and ﬁnals (HMR 2994) Left Trunnion is available but Large feed box. Flights are approx 80+%, good needs to be installed. Overall good condition. sprocket, & jackshaft drive gears. 60hp motor and #650001 Cat 416B 4WD backhoe with Extendo Hoe gear box, but has removable mount (for transport). 24" bucket w/ teeth. Enclosed ROPS ab w/ heat, no Heavy duty apron feeder. Shipping dims: 8' 7" tall air. Has 7374 hours. Has wobble stick controls. & 30' long. #700001 CAT 12F MOTORGRADER (1970) power #131022 Hewitt Robbins 48"x20' vibrating grizzly shift, hydraulic side shift, & scariﬁer. 14.00-24TG feeder (E-11 mechanism) with hopper. Good condi- tires approx 30-40%. Everything works and runs tion. good. Good condition. #410079 (2008) Komatsu D51PX-22 Crawler Dozer JAWS & IMPACTS pre-emmissions engine (3246 hours), new rails and #111078-Pioneer 153 (3042) jaw plant on factory sprockets (rest of U/C approx 60%), 6-way blade, 3-axle chassis including 100hp AC electric motor, clean cab with good seat & good glass. Overall, 4 hyd jacks & 42″x14′ grizzly feeder with 4′ grizzly good, tight machine. section (bars pretty worn). Jaw plates are 90% on #410080 Cat D3BZ Magnum Dozer (1984) stationary & 40% on moveable. Jaw has hyd adjust. 8′ blade & new wide track undercarriage. 1046 Tires and rims all poor on the chassis. Switch gear, hours. Recently overhauled, runs great. belt scale, and 410 kw generator available. #112046-Metso Nordberg LT1213S Loko Track SCREENS mobile crushing & screening plant x47". 12 cubic #141120-Nordberg 6x20 3-deck incline screen yard hopper w/ vibrating grizzly feeder. Screening with ball tray on bottom deck. No motor, but was a module is 2005. Conveyor width 47" & feed width 43". running take out. Good condition.

#161009 New Willis 36"x60' tube-type radial stacker. w/ 15hp Westinghouse motor, NBS #5 reducer, 4-ply belt, Superior 35 degree CEMA C 4" idlers w/ 4" CEMA C return idlers. Lagged head and wing-tip tail pulleys w/ Dodge bearings. Pintle hitch and pivoted mounting plate.

#112050 (NEW) ANACONDA I-12 (43X45) TRACK MOUNTED IMPACT CRUSHER 43″ diameter, 4-bar rotor on a 45″ wide Universal Crushers impact chamber with a 42″ undercrusher conveyor. 44″x14′ vibrating grizzly feeder with (2) 30″ step grizzly sections with 26″ ﬁnes collection discharge belt. 8.5 yard hopper w/ fold down extensions. Cummins 380HP stage 5 engine. Variable speed drives on feeder and all belts. Includes 30″ magnet. Plant rated at 400 TPH

#141154 Anaconda self-contained 4x10 2Deck track-mounted scalping screen w/ 3 hydraulic folding stockpile conveyors & JCB 444 EcoMAX 74HP engine (T4F). Flipdown hopper tailgate for direct feed. Variable speed for all belts. Max feed up to 16" & machine is rated up to 250HP.

#142003-Deister 5x16 2-deck horizontal, underslung screen with new bearings SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. #121053-Cedarapids 5040 Hammermill secondary crusher with 5x16 3-deck screen. Has rotovator, 36" return and 36" front discharge conveyors. All mounted on tandem axle chassis. Plant is all electric except the hammermill is diesel jack shaft driven. No power on mill. Power unit and control panel are available separately for $12,000. Engine runs, but needs to be rebuilt. #123025-Portable Telsmith 48" STD cone w/ 30" feed conveyor w/ 20 HP motor, Dodge TDT5 reducer, 36" undercrusher conveyor w/ WEG 20HP electric motor. Cone has 125HP 1150RPM motor, mounted on factory tandem axle chassis. Good brakes, very good rubber. Good running cone. #121058-Spokane model 74 vertical shaft impact crusher with stand and 250hp electric motor. Has 4shoe table and anvil ring with good shoes and near new anvils. #122002-Pioneer 4030 triple roll portable w/ 36″ feed conveyor, 4×10 Portec Pioneer scalping screen, 36″ discharge conveyor. Tires on chassis are good. No motor included for the rolls.

Jefferson City, MO 65110

Page 56 • May 28, 2022 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

To learn more scan here.

(770) 407 2014 - info@faeusa.com

fae - group .com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2022 • Page 57

Illinois

Northern Indiana

Midwest Crushing & Screening, Inc.

(6 Counties)

13929 S Kostner Ave. Crestwood, IL 60418 www.midwestcrushandscreen.com

847.271.5027

Kentucky

Indiana

Minnesota

& Michigan

Powerscreen Crushing & Screening

Powerscreen Crushing & Screening Indiana

Theco, Inc.

Powerscreen Michiana

11901 Westport Road Louisville, KY 40245

12346 Southeastern Ave Indianapolis, IN 46259

www.powerscreensales.com

502.326.9300 • 800.227.0534

317.778.6677 • 800.227.0534

255 N. Hetzler Court Angola, IN 46703 www.powerscreenmichiana.com

260.665.5816 • 800.843.4277

Ohio

Missouri & Kansas

AGGCORP

Powerscreen Central

14833 164th Ave. S.E, Big Lake, MN 55309

22800 Lakeland Blvd. Cleveland, OH 44132

9001 Hickman Mills Drive Kansas City, MO 64132

www.thecoinc.com

www.aggcorp.net

www.powerscreensales.com

763.263.0505

614.309.6854

816.718.9600 • 800.227.0534

Page 58 • May 28, 2022 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

A WIRTGEN GROUP COMPANY

T WO O POWERFUL PR RODUCTS. ONE GREAT RESULT. KLEEMANN CRUSHING AND SCREENING G PL ANTS

PERFORMANCE AND EFFICIENCY Y.. KLEEMANN crushing and screening plants can be optimally combined to create a quality end-produc t. An extensive selec tion of mobile jaw, impac t and cone crushers and screening plants, available as scalping and classif ying screens, open up the most diverse applications. With KLEEMANN plants, you’ll achieve the best results – in natural stone, recycling and mining. www.wirtgen e -group.com

WIRTGEN AMERIC A , INC . · 6030 Dana Way · Antioch, TN 37013 · Te Tel: (615) 501- 0600 · Fax: (615) 501- 0691

www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 • 800-352-2757 329 2nd Street Industrial Building 145 Proctor, MN 55810 800-352-2757

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

www.rolandmachinery.com

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schoﬁeld, Wisconsin 9808 Weston Avenue Schoﬁeld, WI 54476 Phone: 715-355-9898

Springﬁeld, Illinois 816 N Dirksen Parkway Springﬁeld, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2022 • Page 59

COMPANY WRENCH www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105 1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850 1330 KY-151 Frankfort, KY 40601 502-699-2681

mhl 375 F -SERIES

STRONG. RELIABLE. E EFFICIENT.

www.rolandmachinery.com 816 North Dirksen Parkway Springfield, IL 62702 217-789-7711 220 E Frontage Road Bolingbrook IL 60440 630-739-7474

Discover Morre Fuchs World- Class Material Handlers

1505 Donna Drive Carterville, IL 62918 618-985-3399 4299 N Main Street, Unit A East Peoria, IL 61611 309-694-3764 18210 Beck Road Marengo, IL 60152 815-923-4966 6450 Melton Road Portage, IN 46368 219-764-8080 4670 Crossroads Industrial Drive Bridgeton, MO 63044 314-291-1330 4110 I-70 Drive South East Columbia, MO 65201 573-814-0083 3364 Percy Drive Cape Girardeau, MO 63702 573-334-5252 701 Industrial Drive Palmyra, MO 63461 573-769-2056

Page 60 • May 28, 2022 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Sandvik Maximizes Uptime, Lowers Ownership Cost Specifically designed for its mobile crushers, Sandvik endurance packages are configurable and can be tailored to meet specific customer needs and requirements. They will provide all the necessary parts should the unexpected occur, allowing users to replace them immediately, maximizing your plant’s uptime. They are the perfect solution for both sites working long hours (high utilization) and or remote locations, where availability and support are essential to your operation, according to the manufacturer. The introduction of Sandvik’s endurance package offering ensures its products meet Sandvik’s core commitments to its customers of providing world-class service through its aftermarket network and providing the highest uptime in the industry. This allows the company to collaborate with its customers to develop innovative services that lower the total cost of ownership while safely maximizing production. Sandvik’s endurance packages are designed to deliver maximum uptime by ensuring all items needed for correct repair and maintenance are conveniently packaged together

and available in advance, at a customer’s job site. The packages range from standard maintenance all the way through to major component “exchanges” allowing customers to choose the type of packages that best suits their operational needs. Sandvik’s maintenance, repair and overhaul package strategy aims to meet varying customer demands and caters for all quarry, mining, as well as demolition and recycling applications. Sandvik’s endurance packages are designed around the following concept: • Maintenance — Scheduled maintenance packages containing all items to carry out procedure • Repair — Packages designed for repair and maintenance of critical areas on the machine • Overhaul — Complete assembly for immediate change out greatly reducing downtime. Repair packages also available to refurbish OEM assemblies ready for the next scheduled change over.

All packages contain Sandvik genuine OEM parts. Spare and wear parts are selected and tested following Sandvik engineering design standards and the latest technology available. They are designed to fit perfectly into Sandvik mobile crushing and screening equipment to give optimum performance, while at the same time protecting major components in the toughest operating conditions and maintaining original Sandvik parts throughout, according to the manufacturer. Key customer benefits include: • Higher uptime — Replace parts immediately keeping downtime to an absolute minimum • Greater availability — Avoid delays or parts shortages with delivery of all components in one shipment in advance • Genuine quality — All packages contain genuine OEM parts for quality and optimum performance • Configurable — Mix and match to select the right package to suit your operation and conditions. For more information, visit www.rocktechnology.sandvik. 

Modular Mining, Immersive Launch Simulation System Modular Mining, a Komatsu technology brand, and Immersive Technologies, a Komatsu subsidiary, have announced support for ProVision Guided Spotting for Immersive Technologies’ range of haul truck simulator conversion kits. The Guided Spotting simulation was developed to accelerate the deployment of Modular Mining’s Guided Spotting system without impacting production. By uniting Immersive Technologies’ and Modular Mining’s expertise in training and workforce development, and load and haul optimization, mines can experience enhanced technology adoption faster without needing to remove haul trucks from production. Modular Mining’s Guided Spotting system is a high-precision machine guidance tool for haul trucks designed to improve efficiency, safety and productivity at the loading site by allowing operators to confidently reverse into the best loading position without needing to pause or stop. “Using high-precision GPS, Guided Spotting reliably guides haul truck operators to the correct loading position while the shovel continues productive work,” said Zilmar Siqueira, product manager — Machine Guidance Systems, Modular

Mining. “The easy-to-use displays help take the guesswork out of reversing, enabling mines to reduce their shovel hang time and increase productivity. It does this by eliminating bucket spotting and reducing the probability of a truck-shovel collision in low visibility conditions.

“Like any new technology introduced onto a mine site, the rollout of training can take time. By partnering with Immersive Technologies, we have been able to reduce that initial loss of production and accelerate the speed of deployment, which enables customers to reap the value of the system much sooner.”

Guided Spotting is a high-precision machine guidance tool.

Immersive Technologies’ full range of haul truck simulator conversion kits can be configured to support Guided Spotting via a software update. “Simulator training can greatly reduce infield and total training time, which helps minimize the impact to production and allows the benefits of Guided Spotting to be realized faster,” said Greg Karadjian, senior vice president — Asia Pacific, Immersive Technologies. “More importantly, it enables the operator to train in a controlled environment that reduces operator exposure and potential damage to a mobile plant.” “When you need to take out multiple trucks and hundreds of operators to train them on a new system, it poses significant costs to any operation. The implementation of Guided Spotting for our haul truck simulators means mines can minimize the time operators spend training, and doesn’t remove equipment from production,” said Karadjian. The Guided Spotting simulator training has already been rolled out at an African Platinum mine and is scheduled to be adopted across three additional mines this year. For more information, visit www.komatsu.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 28, 2022 • Page 61

Page 62 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Place Panels, Set Piling, Pour Concrete for Bypass BYPASS from page 1

During 2024, WIS 15 will be closed to traffic from U.S. 45 to 25 percent between 2014 and 2019,” County T (just west of Hortonville) said Bill Bertrand, WisDOT project while the west segment is conmanager, Winnebago County and structed. Traffic will be detoured via WIS 15 expansion. County T to County TT to U.S. 45. “There also was a significant As for how commuters are increase in severe/fatal crashes durresponding to the work, said ing this timeframe. While WisDOT Bertrand, “There were minimal implemented several interim safety delays to traffic in 2021, so we measures in the short-term, the only have heard little from motorists, long-term solution is a four-lane limthus far. We encourage motorists ited access expressway.” to be patient and remain alert Bertrand noted the most recent when driving through the work forecasts confirm the steady traffic zone during the remaining conincreases along the corridor. struction, so that drivers and high“Current standards dictate that way workers can remain safe.” rural arterials should be considered The WIS 15 four-lane expanfor four lanes when approaching sion will be a much-needed 15,000 average daily traffic [ADT]. improvement for the overall The east segment of WIS 15 exceeds Dean Teska (Kapur) photo the ADT threshold and the west seg- WisDOT’s $136 million project in Outagamie County includes building a bypass at Hortonville and region and local communities. The original environmental impact ment meets that threshold. Based on providing wider roadways to New London. statement for this corridor was the actual and forecasted traffic volLast year, mainline WIS 15 motorists approved in 2009. WisDOT will have umes, the existing highway geometric local community to thrive.” The project is funded through the were not affected by the construction since it invested more than two decades of effort issues, the heavy truck and bus volumes and the mix of local and through traffic, the WisDOT major projects program that gener- occurred on the bypass segment away from into this project by the time it fully opens to ally represents 80 percent federal funds and live traffic. During 2022, there will be a one- traffic in late 2024. expansion to four lanes remains justified.” The undertaking includes constructing a Heavy regional traffic currently conflicts 20 percent state funds. Bertrand said con- month closure on the east segment of WIS with local traffic, impairing the operations of struction was staged to make use of available 15 while the at-grade railroad crossing is $25 million, 3.5-mi. bypass. One of the main WIS 15 through Hortonville. The construc- funds in specific years, while also minimiz- reconstructed. Traffic will be detoured via challenges for crews on the project has been tion of a WIS 15 bypass of Hortonville will ing impacts to local businesses, residents and WIS 76 to County JJ. The remainder of con- building the initial haul road through the communities. struction during 2022 will be staged to main- marsh, which progressed slowly because of separate the regional from local traffic. “The three segments also have unique ele- tain traffic on existing WIS 15. There will be the large volume of unsuitable marsh mate“The pavement condition also has deteriorated and is nearing a point where a major ments that made it logical to separate them. some short-term closures of local side roads rial that needed to be removed. Weather also has been an issue. reconstruction is needed,” said Bertrand. The bypass is on relocation with very large while new connections are completed. During 2023, WIS 15 will be closed on Depending on rainfall amounts, work could “There are several vertical curves that are cuts/fills and eight new bridges. However, substandard and may contribute to opera- given that the bypass is in a new location, it the west side of Hortonville while the WIS be suspended for several days at a time. can be completed with relatively little impact 15/County T roundabout is constructed. Black Otter Creek is the furthest point from tional and safety issues.” There are roughly 300 existing access to area traffic. Both the east and west seg- Traffic will be detoured via I-41 to U.S. 10 to any access point from public right-of-way, so points within the project limits. These access ments generally follow the existing WIS 15 U.S. 45. Officials expect to fully open the this required haul roads to be constructed from points, in combination with growing traffic corridor and must be staged due to existing bypass and east segments of the new four-lane each direction to allow for construction access. expressway to traffic in late 2023. A temporary bridge was placed over Black volumes, provide opportunities for collisions. development along the roadway. Otter Creek to expedite the moving of equip“The traffic and safety issues can only be ment from one side of the creek to the other. fully resolved with the proposed expressway WisDOT construction staff photo Most recently, structure crews have been Most recently, structure crews have been placing retaining that includes an expansion to four lanes and wall panels, setting piling and pouring concrete piers. placing retaining wall panels, setting piling a limited-access bypass of Hortonville. and pouring concrete piers. The grading Safety and operational issues along the existcrew is working on removing cut material ing corridor would continue to escalate withfrom the hill and removing remaining marsh out this improvement.” on the east end of the project. The contractor The ongoing construction is expected to also is placing cross culverts and median boost economic development and lower inlets, and finishing grading some ditches by transportation costs. placing topsoil and seeding. “WIS 15 connects the Appleton All storm sewer and pond pipes have been Metropolitan area with Hortonville, New placed, four of five retaining walls and 11 London and other local communities. cross culverts have been completed and Capacity expansion of WIS 15 will allow the 500,000 cu. yds. of embankment was facility to connect the U.S. 45 bypass of moved. Crews excavated and backfilled New London and WIS 15 to I-41 and 95,000 cu. yds. of marsh material in five Appleton, providing important system linkmonths and completed two bridges in a span age for the region. of three months. “The Hortonville bypass still provides a As for unanticipated issues, there was a high level of access with roundabouts on larger than expected quantity of landfill either end of the village, but it removes excavation, with cost and quantity twice the heavy through traffic from the downtown area, thus improving safety and allowing the see BYPASS page 70

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 63

JohnDeere.com/Dozers

GET OUT IN FRONT OF IT. With the most horsepower in its class pushing an available 161-inch-wide blade, the 750L delivers %$#%"! $ ! $ !$ $ ! $ # ! # # # ! #" " $ " ! # $# !" $ #%$% "" ! $ # $% # #%$ #%$ " $ $ $ $ # # "% #%$ ! "$ $ $ ! % $ # $ # % $ $ $ $ # # $ $ $ # !

mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700 Sparta,WI 608/351-2101

MOST HP IN ITS CLASS

161" BLADE

GRADE-CONTROL OPTIONS

www.westsidetractorsales.com Lisle, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677

Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160

Page 64 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu’s New Corporate Campus in Milwaukee Receives Top Awards Komatsu recently received awards recognizing the company’s newly completed office building project in Milwaukee, Wis. The Daily Reporter, a construction industry publication, honored Komatsu’s South Harbor office building and parking structure with both a 2021 Top Projects award and the Best in Show award, an accolade bestowed on the top project among all the 2021 award winners. The Milwaukee Business Journal recognized the Komatsu project with its 2022 Best New Development Office award. Komatsu’s 180,000-sq.-ft. office building is part of a new corporate campus nearing completion in Milwaukee’s Harbor District, located just south of the city’s downtown area. Designed to reflect the company’s focus on sustainability, the office building received LEED v4 Building Design & Construction (BD+C) Gold certification from the U.S. Green Building Council. The LEED program is a globally recognized symbol of excellence in green building and its certification helps to ensure electricity cost savings, lower carbon emissions and healthier environments. The South Harbor office building is the only LEEDv4 BD+C New Construction (NC) Gold project in the city of Milwaukee and is the highest-rated LEEDv4 BD+C in the state of Wisconsin.

Komatsu’s South Harbor campus in Milwaukee, Wis.

“We are grateful to our partners at Hunzinger Construction, EUA and GRAEF for making this project possible,” said John Koetz, Komatsu’s executive VP of surface mining. “We could not have completed this complex build and earned LEED Gold certification without the support of the full project team.” Also part of the campus is a 430,000-sq.-ft. manufacturing facility that recently began operations. The facility produces the major components of large mining machines, including electric rope shovels, hybrid shovels, draglines and blasthole drills. The location serves as the large gearing center of excellence and the large fabrication and machining center of excellence for Komatsu’s global mining division. For more information, visit www.komatsu.com. 

George Willer Joins McCann Industries as New Director of Product Support McCann Industries Inc. announced it has hired George Willer as director of product support. Willer brings several years of industry experience to this newly created position. Willer will be responsible for growing the company’s parts and service business. “We’re excited to have George lead our product support efforts. Bringing him onboard is a major milestone in our strategic plan,” said Steve Roggeman, president of McCann Industries Inc. “Our purpose is to be a trusted supplier that cares about the longterm success as much as the project at hand.” “George’s knowledge and industry experience will help us continue to deliver an exceptional customer experience,” said Jim McCann, CEO of McCann Industries Inc. 

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 • 800/888-9515 Duluth, MN 218/727-8611 • 800/888-9535 Virginia MN 218/741-9011 • 800/752-4304 Des Moines IA 515/282-0404 • 800/555-1445 Sioux City IA 712/252-0538 • 800/633-9104 Cedar Rapids IA 319/363-9655 • 800/616-6615 East Moline, IL 309-755-7203 • 800-633-9114

George Willer

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 65

My Komatsu is everywhere you are &%$#"!! $ # # " # !$#" # # $$ # telema tics, equipmen t suppor t manua ls, par t s ordering $ #" # # $ " $ #" %$ $ # " #

Create an account at mykomatsu.komatsu # ! " # %$#" # # !$# !" # # %$# # $# # " # %$#" " $ # # $ #

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

DIESEL MACHINERY, INC.

www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 • 800/456-4005 Aberdeen, SD 605/725-4364 • 888/762-6312 Rapid City, SD 605/348-7438 • 800/658-3047

ROLAND MACHINERY CO. www.rolandmachinery.com

816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399

East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920

Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056

DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710

Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

Page 66 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

INDIANA MACALLISTER MACHINERY

Heavy Equipment Rental Locations “Disaster Training Camp” created 26 new sawyers and sawyer instructors, as well as three new heavy equipment operators for future deployment to disaster sites throughout North America

Case Holds Team Rubicon Training Event With Case Power & Equipment In preparation for continued tornado, hurricane and disaster response, Case Power & Equipment of Florida and Case Construction Equipment each provided equipment and attachments to veteran-led disaster response organization, Team Rubicon’s latest Disaster Training Camp, held at the Camp Shands Boy Scouts Camp in Hawthorne, Fla. The training camp prepared Team Rubicon volunteers for the work they will encounter in real disaster deployments, while simultaneously completing site improvement projects at the Boy Scouts camp. The disaster training included heavy equipment operators — working with Case compact track loaders and grapple buckets — training alongside sawyer (chainsaw) teams to showcase real world route clearance and disaster cleanup operations critical in tornado and hurricane responses. The training event resulted in 26 new sawyers and sawyer instructors responsible for clearing trees and debris, as well as three new or elevated heavy equipment operators, who use the loaders to remove and stockpile debris. This includes route clearance activities, as well as yard cleanup and demolition work that Team Rubicon performs for free in the wake of disasters. “The Florida Disaster Training Camp is critical to our operations and was a success, largely because of the support provided by Case and Case Power & Equipment of Florida,” said Patrick Wright, heavy equipment associate at Team Rubicon. “These camps give our volunteers the time and training needed in a safe, non-disaster environment that ensures our teams are familiar with the tools, communications and processes we use in disaster response operations.” Case and Team Rubicon have a long history of working together in Florida, including an extensive deployment to Mexico Beach, Fla., in the wake of Hurricane Michael in

2018. Most recently, Team Rubicon heavy equipment teams have responded to the tornados that ravaged Kentucky in December 2021, wildfire cleanup in California, and ongoing rebuild around Hurricane Harvey in Texas. “We are here to help Team Rubicon do the heavy lifting,” said Jody Beasley, director of national equipment sales, Case Power & Equipment of Florida. “The work that Team Rubicon does to lift people up on their worst days is inspiring to our entire team because Case is dedicated to helping support, build and rebuild our communities. “It’s our honor to provide equipment and support to train volunteers for showing up to do the hard work in Florida and across the country.” The event helped three Team Rubicon volunteers achieve Heavy Equipment Operator 1 (HEO1) or Heavy Equipment Operation 2 (HEO2) ratings with Team Rubicon: Lisa Dellinger (HEO2), David Skillman (HEO2) and Lyn Farias (HEO1). Team Rubicon serves communities by mobilizing veterans to continue their service, leveraging their skills and experience to help people prepare, respond and recover from disasters and humanitarian crises. Founded in 2010, Team Rubicon has deployed across the United States and around the world to provide immediate relief to vulnerable communities who have been impacted by hurricanes, tornadoes, COVID-19 and more. Case first partnered with Team Rubicon in 2015 to develop a heavy equipment training program for its volunteers for the safe and effective use of construction equipment in disaster operations. For more information on the partnership between Case and Team Rubicon to support communities in response to natural disasters, visit CaseCE.com/TeamRubicon. 

www.macallister.com Indianapolis HQ 317-545-2151 Fort Wayne 260-483-6469 Lafayette 765-449-8191 Terre Haute 812-478-3155 South Bend 574-288-6622 Washington 812-254-1712

KENTUCKY OHIO CAT

www.OhioCAT.com Richwood 888-446-4658

OHIO OHIO CAT

www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 67

IOWA ZIEGLER CAT

www.ZieglerCAT.com Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

MINNESOTA ZIEGLER CAT

www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

Page 68 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Rule Terms to Provide Consistency, Clarity of Regs RULES from page 1

FHWA said the final rule, effective June 6, 2022, includes new requirements for a highway bridge inspection program, maintaining a bridge inventory and reporting inspection results. It also requires reporting “critical findings” or any structural or safety-related deficiencies that require immediate follow-up inspection or action. The updated NBIS applies to highway bridges on all public roads, on and off federal-aid highways, including tribally and federally owned bridges. It also applies to private bridges that are connected to a public road on each end. “Periodic and thorough inspections of our nation's bridges are necessary to maintain safe bridge operation and prevent structural and functional failures,” said FHWA. “In addition, data on the condition and operation of our nation’s bridges is necessary for bridge owners to make informed investment decisions as part of an asset management program.” In MAP-21, Congress declared that inventorying, inspecting and improving the condition of the nation’s highway bridges is in the nation’s best interests. “As a result of this declaration and the authority established by MAP-21 in 23 U.S.C. 144, FHWA is updating the NBIS.” New terms in the rule provide consistency and clarity in the implementation of the regulations. This includes renaming certain existing terms in a more descriptive way, such as fracture critical member being renamed nonredundant steel tension member (NTSM). “The final rule requires bridge inspection organizations to maintain a registry of nationally certified bridge inspectors to align with a similar provision in the National Tunnel Inspection Standards [NTIS] in 23 CFR part 650, subpart E,” said the agency. Training requirements for program managers and team leaders have been modified by defining a required amount of refresher training for both roles and defining training needed to be a team leader on a NSTM inspection. The regulations prescribe the permissible inspection intervals for bridges, including options for more

The FHWA has updated its National Bridge Inspection Standards.

Periodic and thorough bridge inspections are necessary to maintain safe bridge operation and prevent structural and functional failures, said FHWA.

rigorous, risk-based intervals based on the consideration of certain factors, according to FHWA. They also provide options for establishing inspection intervals for each inspection type. For instance, an inspection interval tolerance of three months beyond the inspection date is included. Extended routine inspection intervals up to 48 months, and 72 months for underwater inspections are provided for. The establishment of more rigorous, risk-based intervals in consideration of factors for routine, underwater and NSTM inspections, that would allow some inspection intervals to be up to 72 months, also is covered. The final rule also requires written reports to FHWA of critical findings identified during inspections and provides minimum criteria for what a critical finding is, for national consistency. “The regulations also require that a bridge inspection organization provide information to FHWA for annual compliance reviews,” said the agency. The updated regulations include new time frames for updating inventory data and a process for tracking the updates of inventory data. In addition, they include a new document to identify data items for the NBI. This document, “Specifications for the National Bridge Inventory (SNBI),” replaces the “Recording and Coding Guide for the Structure Inventory and Appraisal of the

Nation’s Bridges (Coding Guide).” The final SNBI document is included in the docket. Aging Program In 2021, FHWA marked the 50th anniversary of its NBIS, which supports the federal program that helps protect nearly 620,000 bridges across the country. “For a half-century, NBIS standards have been at the core of federal infrastructure safety efforts,” said Stephanie Pollack, FHWA’s acting administrator. “The data we collect under the program help keep bridges safe and identify areas where maintenance is needed before problems arise.” The NBIS umbrella covers 618,456 bridges, up from 588,735 bridges or a 4 percent increase over the past two decades, according to the American Association of State Highway and Transportation Officials (AASHTO). It mandates regular inspections of highway bridges to detect any potential structural problems early and verify bridge maintenance schedules. FHWA noted that state departments of transportation inspect each and every bridge at least once every 24 months. In addition to specialized training for bridge inspectors, the program also requires the collection of bridge condition data for inclusion in FHWA’s National Bridge Inventory, which helps transportation officials make informed decisions about funding priorities. FHWA officially adopted the

NBIS regulations in 1971 after the collapse of the Silver Bridge in West Virginia in 1967 due to a crack in the bridge’s suspension chain. “That tragedy, which cost the lives of 46 people, brought national attention to the issue of bridge condition safety and led to a systematic effort to ensure oversight at the national level,” said AASHTO. Good Timing The updates come at a time when nearly 224,000 bridges across the country need repair. Some 43,600 are structurally deficient and in poor condition, according to ARTBA. The number of bridges in need of repair represents 36 percent of all U.S. bridges, according to ARTBA’s latest bridge report, released early this year. Some 48 percent of 619,588 bridges are in fair condition. But almost 80,000 bridges should be replaced, according to ARTBA. “If placed end-to-end, these bridges would stretch over 6,100 miles — long enough to crisscross the country from Los Angeles to Portland, Maine, and back again,” said Alison Premo Black, the association’s chief economist. Premo Black conducted the analysis for ARTBA. The IIJA provides states with significant new resources to make long overdue infrastructure improvements, including bridge repairs, said ARTBA. “The longer it takes to bridge the political divide on the FY 2022 spending bills, the longer it will take for transportation improvements to get started,” Dave Bauer, ARTBA president and CEO, said. “We urge Congress to act forthwith

so that the American people can begin to realize the benefits of the historic investments in the bipartisan infrastructure law.” Based on average repair and replacement cost data published by the FHWA and submitted by bridge owners (typically state DOTs), ARTBA estimates the cost of identified repairs for all 224,000 bridges, including the 43,578 structurally deficient, is $260 billion. The number of structurally deficient bridges was down by 1,445 compared to 2020. At current pace, it would take 30 years to repair them all, said Premo Black. Almost half of the 619,588 U.S. bridges — 48 percent — are rated in fair condition. “This means that the bridge shows evidence of minor deterioration or minor cracks,” said ARTBA. The number of bridges in fair condition grew by 2,916 in 2021, reaching 297,888 structures. At 4,504, Iowa leads the list of states with the largest number of bridges in poor condition. Pennsylvania with 3,198; Illinois, 2,405; Oklahoma, 2,296; Missouri, 2,218; New York, 1,672; Louisiana, 1,631; California, 1,493; West Virginia, 1,490 and Ohio, 1,334, follow. States and territories with the most bridges in poor condition as a percentage of their total bridge inventory are West Virginia at 20 percent; Iowa, 19 percent; Rhode Island, 17.5 percent; South Dakota, 17.3 percent; Pennsylvania, 13.8 percent; Louisiana, 12.7 percent; Maine, 12.6 percent; Puerto Rico, 12.1 percent; North Dakota, 11.2 percent and Michigan, 11 percent. see RULES page 70

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 69

11745-R Lackland Road St. Louis, MO 63146 314-427-4911 www.cpower.com

16400 Brookpark Road Cleveland, OH 44135 440-439-4567 www.companywrench.com

2841 Verona Rd Verona, KY 41092 859-485-8500 www.newmantractor.com

3905 Country Rd WW Wausau, WI 54401 715-362-4977 www.scandforestry.com

Page 70 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Marsh Grading, Excavation, Backfill Under Way On Road Widening Project BYPASS from page 62

amount originally estimated. The railroad was sold from Canadian National to WATCO; however, the transition went smoothly, and the coordination with the new company has gone well. Building the bypass includes constructing eight bridges, including two over the WATCO railroad line on the far west end near County T. The earth work involves placing 1.2 million cu. yds. of embankment, with more than 400,000 cu. yds. needed from offsite. The fills and cuts are up to 30 ft. high/deep in some areas. More than 350,000 cu. yds. of cut material needs to be long hauled more than a mile to placement. A total of 127,000 cu. yds. of marsh excavation and backfill also is needed. The work includes installing 48 cross culverts; median pipes; storm sewer and pond pipes; building five retaining walls with a total wall facing area of 23,600 sq. ft., along with

realigning 1,600 ft. of County MM and restoration of more than 340,000 sq. yds. (70 acres) of disturbed area. The roundabout construction consists of grading operations, such as excavation, and filling existing ground to proposed grades, and placing select crushed material and base aggregates. Other work items included storm sewer installation; electrical installation for lighting; curb and gutter; concrete pavement; signing; pavement marking; overhead sign structure installation; and restoration. Grading work included moving common material and spreading it throughout the project and obtaining borrow and placing it where applicable. Currently, approximately 50 percent of the embankment has been placed. The marsh excavation and backfill is roughly 80 percent complete. Main equipment being used on site has included John Deere 650, 750, 850 and Cat D8, D6 dozers; Cat 390, 352, 349 excavators; and Volvo A45G,

A40G, Cat 745 and John Deere 460E articulated haul trucks. Materials being used include sand, clay and rocky clay for the subgrade; MSE wall backfill behind the retaining walls; structure backfill at the bridge abutments and breaker run at entrances; select crushed subbase; 1 ¼in. base aggregate for base material; 9in. concrete pavement; and some asphalt for shoulder, multi-use path and side road connections. Bertrand said WisDOT recognizes the numerous benefits the new WIS 15 four-lane expressway will provide to the region and the local communities along the corridor, once completed. “Outagamie County and the area communities have shown strong support for this much needed improvement, and WisDOT has worked closely with them for the last 15 years through the environmental and design phases. It’s extremely gratifying to see construction under way on this project.”  CEG

States Have Options for Inspections RULES from page 68

Reliable Inspections The rule addresses requirements set by MAP-21 offering states options in determining inspection intervals for bridges. Each state can have the option to continue their current inspection intervals if they determine the requirement is satisfactory or choose to instate more rigorous requirements for inspectors. This latter method would call for bridge specialists to assess potential risks to the point of failure for each individual bridge, or a cluster of bridges, to be further evaluated by experts, according to the organization Report Card for America’s Infrastructure. “Current standards set inspection intervals at roughly 24 months apart with a maximum interval being 48 months. Bridges with higher risk considerations are inspected every 12 months.” While the first method consists of similar regulations, it does differ by requiring more thorough criteria for establishing which bridges need 12-month intervals for inspections, said the organization. The Federal Register notice says that the second method “involves the identification and use of an interval that is commensurate with the risk of safety of service loss in a given bridge.” Inspectors could determine the risk factors based on what is described as an “impact and consequence matrix,” serving as a formula for assessing failure probability. This matrix was based on research by a team of civil engi-

neers that included Robert Connor of Purdue University and Glenn Washer of the University of Missouri. “The results of the research will allow the intervals at which bridges are inspected to be established based on a riskbased approach,” Connor said. “It’s a compliment to see your work have a potentially major impact.” The research followed initial work conducted for FHWA that developed risk-based inspection strategies for bridges that contain NSTM, or fracture critical members. Connor said prior to the NBIS updates, bridge inspection standards were calendar-based, calling for on-site inspections every 24 months, regardless of the bridge’s age. There were no explicit adjustments for age or circumstances such as environmental conditions that can wear on a bridge faster. He said the research calls for a risk-based analysis that allows inspection efforts to focus on bridges and areas that are more likely to have problems or would have significant consequences should a problem arise. “The research allows an owner to decide how to best manage the inspection needs of their diverse inventory of highway bridges,” said Connor, director of the Steel Bridge Research, Inspection, Training and Engineering Center. “Rather than over inspecting newer, healthy bridges, the interval can be rationally extended to, say, every 48 or 72 months for some. “This will then allow an owner to spend more time on other bridges they are more concerned about and inspect those say every 12 months, for example.”  CEG

KOBELCO-USA.COM

Mid Country Machinery

Southeastern Equipment Co., Inc.

3478 5th Ave S Fort Dodge, IA 50501 800-206-5936

Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303

4734 Sergeant Road Waterloo, IA 50701 319-234-8710

1356 3rd Street Brilliant, OH 43913 740-598-3400

106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

1500 Industrial Parkway Brunswick, OH 44212 330-225-6511 6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479

DeForest, WI 608-222-9191

8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Eau Claire, WI 715-832-3443

404 Breaden Rd. Monroe, OH 45050 513-539-9214

De Pere, WI 920-338-5800 Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868 4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 71

EXPECT C MORE FROM YOUR YO EXCAVA VATOR O KOBELCO machines lead the ﬁeld on performance sp pecs for power and fuel economy while providing unrivaled operator comfort – all so you o can get more done e each day than you u ever thought possible e. Plus, they’re all backed e by the service and parts p support of the powerful KOBEL LCO dealer network. Visit you ur local KOBEL O CO deale er to ﬁnd the model bu uilt to help you Get Mo ore Done.

REP Rents

Company Wrench

Blue Ridge Tractor

429 Haven Hill Road Shelbyville, KY 40065 502-633-9928 www.reprents.com

1330 KY-151 Frankfort, KY 40601 502-699-2681 www.companywrench.com

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690

10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

Page 72 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 73

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650

1st Choice Equipment LLC

ABC Equipment Rental & Sales

Southeastern Equipment Co., Inc.

www.1stchoiceequipment.com

www.abcequipment.com

www.southeasternequip.com

1555 Atlantic Drive West Chicago, IL 60185 630/510-6050

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

1305 Sentry Drive Waukesha, WI 53186 262/521-5802

38525 Chester Rd. Avon, OH 44011 440/934-7368

Alta Equipment Co. www.altaequipment.com 18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA

Central Power Systems & Services www.kubotacentral.com 1285 Acraway Street Garden City, KS 67846 620/765-3118

Page 74 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Powe er on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Roland Machinery Co. www.rolandmachinery.com

Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920

Central Power Systems & Services

www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Liberal, KS (816) 781-8070 (620) 624-7274 ALP Air, Light, Power Salina, KS Liberty, MO (785) 825-8291 (816) 415-6700 Wichita, KS Joplin, MO (316) 789-7370 (417) 726-5373 Woodward, OK Maryland Heights, MO (580) 256-6014 (314) 427-4911 Yukon, OK Springfield, MO (405) 324-2330 (417) 865-0505 Tulsa, OK (918) 984-6565

Brandeis Machinery & Supply Company www.brandeismachinery.com

1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

MAKE POWER MOVES.

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

Swanston Equipment Company www.swanston.com Fargo, ND (800) 369-0371 Minot, ND (800) 210-8766 Fergus Falls, MN (218) 739-4505

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 75

DELIVERIING PERRFORM MANC E AND VERSA V ATILIT T Y For 75 yearss, Grove mobile cranes continue e to earn the tru ust and confiden nce of ndustry leading performance. customers thanks to their reliability and in Grove produc cts are available in n:

> All-terrain models m with capacitie es from 55 USt to 550 0 USt > Rough-terraain models with capaacities from 30 USt too 165 USt > Truck-moun nted models with cap pacities from 40 USt to 115 USt > Telescoping crawler models with capacities from 30 USt to 140 US > Industrial models m with capacitie es from 9 USt to 25 US St

www.ma anitowoc.com

Kirby-Smith Machinery Inc. www.kirby-smith.com

12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700

4617 Powell Street McAlester, OK 74501 918/310-1550 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820

8320 Ruby Ave. Kansas City, KS 66111 913/850-6300

Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757

Page 76 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (WORLDWIDE): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI, JOHN DEERE, KOMATSU 300, 400, AND 450 SIZES EXCAVATORS. OFFER ME RUNNING OR NONRUNNING EXCAVATORS. EMAIL: USEDEQUIPMENTSOURCING@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): LOOKING TO BUY HITACHI EXCAVATORS EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: INFO@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): KUBOTA B7300HSD TRACTOR WITH 60 INCH MOWER DECK. EMAIL: PRONCALLO@AOL.COM; PHONE: 845-225-7504 –––––––––––––––––––––––––––––––– WANTED (US): ACS INDUSTRIES – BUCKETS, ALL MODELS EMAIL: BEBOMOR2003@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU WA30-2 WHEEL LOADER - LOOKING TO BUY A REAR AXLE FOR A KOMATSU WA30-2. IF YOU HAVE A REAR AXLE PLEASE CONTACT ME @ 6I6/8I3/3642. ALSO INTERESTED IN BUYING COMPLETE RUNNING KOMATSU LOADERS WA40 OR SMALLER. EMAIL:CRAIGBERENS944@GMAIL.COM PHONE: 6I6-813-3642 –––––––––––––––––––––––––––––––– MANUFACTURER: MEC 3391RT AERIAL LIFT CONTROL BOX FOR A MEC 3391RT YEAR 2000 PART NO. 20783. DOUBLE FUEL GAS/PROPANE. NO OUTRIGGER. EMAIL: TAVAKE08@ICLOUD.COM; PHONE: 415-748-8079 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS - NEED CATERPILLAR WHEEL LOADERS 950B, 950E, 966F, 966FII, 980F AND CATERPILAR MOTOR GRADERS 140G. EMAIL: NAQIB_KHAN73@YAHOO.COM; PHONE: +923333298751 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS - LOOKING TO BUY HITACHI EXCAVATORS EX270LC,EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM; PHONE: +923332316587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966F WHEEL LOADERS – NEED TO BUY USED CAT WHEEL LOADERS 966F, 966-F-II, 980C, AND CAT 970F. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CONCRETE PUMPS: SCHWING, PUTZMEISTER, ALLIANCE, ELBA, CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS, & SIZES, OLD OR NEW! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED AND PARTS & PUMPS NEEDING REPAIRS. INSTANT PAYMENT GUARANTEED. EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 140G MOTOR GRADERS – CAT USED MOTOR GRADER 140G AND 140H FOR OWN STOCK. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX330-5 EXCAVATORS – WE ARE LOOKING TO BUY A COUPLE OF UNITS OF HITACHI EXCAVATORS EX 330-5 & EX 450-5. IF YOU HAVE ANY OF THEM AVAILABLE, PLEASE LET ME KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988B WHEEL LOADER– WE NEED TO BUY A CAT USED WHEEL LOADER 936, 988B/F & 950B. IF YOU HAVE AVAILABLE, PLEASE DO LET US KNOW. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 992D EXCAVATORS – NEED TO LOCATE JOHN DEERE'S EXCAVATORS SIZES 190E, 200, 210, 230, 270, 300, 400. EMAIL: USEDEQUIPMENTS TRADINGLLC@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): EZ SCREEN 1200XLS SCREENING – ANYTHING THAT WOULD BE LIKE A 1200 OR1200 XLS. EMAIL: MAIERLANDSCAPING@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR BACKHOE LOADERS, ALL MODELS – NEED TO BUY USED CAT WHEEL LOADERS, BACKHOES, EXCAVATORS, HIGHWAY TRUCK. EMAIL: SEARCHT930@GMAIL.COM PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED: CHAINS AND SPROCKETS FOR KOBELCO 400IV OR 480 EXCAVATOR, NEW OR USED. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED: BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 ––––––––––––––––––––––––––––––––

WANTED (PA): JOHN DEERE BUCKETS, ALL MODELS; LOOKING FOR BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR DUMP TRUCKS CAT 725-745'S 10,000 HOURS OR LESS, WILL BUY IN GROUPS. EMAIL: ANDREWL@BLACKSTARACA.COM; PHONE: 312-898-5355 –––––––––––––––––––––––––––––––– WANTED (US); TEREX BUCKET TRUCKS, ALL MODELS - 55 FT & 60 FT 4-5 YEARS OLD, PREFERABLY PREFER TEREX 5TC-55 & ALTEC AA55E PREFER FREIGHTLINER CHASSIS. EMAIL: ZACHZ@BLACKSTARACA.COM; PHONE: 815-575-6797 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS; RUNNING OR NON-RUNNING UNITS REQUIRED. EMAIL: IMPERIALMACHINERYTRADER@GMAIL.COM; PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADERS EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS: 580SK, 580L, 580SL, 580LII, 580SLII, 580M, 580MII, 580MIII, 580SM, 580SM+, 580SMII, 580SMIII, 580N EP, 580N, 580SN, 580SN WT EMAIL: FRANKHORAN@ GROFFTRACTOR.COM PHONE: 800-654-USED –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR MOTOR GRADERS, ALL MODELS - LOOKING TO BUY USED CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H AND 14M. PLEASE SEND ME A PICTURE OF WHAT YOU HAVE WITH DETAIL AND YOUR ASKING PRICE. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI / JOHN DEERE EXCAVATORS 400 AND 450 SIZES. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +92-333-5555-360 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS - URGENTLY NEED CAT 916, 926, 966F AND 970F WHEEL LOADER, ALSO HITACHI EXCAVATORS EX 270, EX 400 AND 450. EMAIL: IUKANDCO@GMAIL.COM; PHONE: +923335555360 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; WE ARE INTERESTED IN BUYING HITACHI EXCAVATORS (DIGGERS) 450, 400, 270, 300, 200 SIZE. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): INTERNATIONAL MODEL FUEL / LUBE TRUCKS, ALL MODELS. LOOKING FOR 1 OR 2 FUEL TRUCKS. THEY WOULD NEED TO BE: -AUTOMATIC TRANSMISSION -DECENT MILES, ENGINE HOURS -PREFERABLY MULTIPLE COMPARTMENTS -PREFERABLY INTERNATIONAL, BUT NOT A MUST -NO DPF, OR MAXXFORCE ENGINES. ONE WOULD BE MAXIMUM $40,000 RANGE, AND THE OTHER AS CHEAP AS POSSIBLE. THANK YOU. EMAIL: MANAGER@ COMMERCIALFLEETSUPPLY.COM; PHONE: 347-489-4474 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 LC-5 EXCAVATORS. WE ARE LOOKING FOR USED HEAVY CONSTRUCTION MACHINES. PLEASE OFFER US FOLLOWING MENTION MACHINES & EMAIL US DETAILS WITH PICTURES CATERPILLAR MOTOR GRADERS 140G CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966FII, 970F, 980F HITACHI EXCAVATORS EX200, EX200LC, EX270LC, EX400, EX400LC, EX300LC, EX330LC-5, EX450LC-5, EX400-5, EX60WD, EX100WD. JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM PHONE: +923332316587 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 950B WHEEL LOADERS - LOOKING TO BUY CAT WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. EMAIL: NAQIB_KHAN73@YAHOO.COM PHONE: +923333298751 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR EXCAVATORS, ALL MODELS; LOOKING FOR SEVERAL CAT 330DL, 336DL, 336EL EXCAVATORS UNDER 10,000 HOURS AND WHOLESALE PRICED. EMAIL: LJEQUIPMENT3@GMAIL.COM; PHONE: 1-3309873508 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; LOOKING FOR OLDER HITACHI EXCAVATORS AND CAT WHEEL LOADERS, IN GOOD RUNNING CONDITION OR NON-RUNNING MACHINES. EMAIL US TO DISCUSS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX450 EXCAVATORS NEED TO BUY HITACHI EX 400 AND 450 SIZES EXCAVATORS. EMAIL: IUKANDCO@YAHOO.COM ––––––––––––––––––––––––––––––––

WANTED (US): ALL MODELS HITACHI EXCAVATORS – WE NEED TO BUY HITACHI EXCAVATORS ZX 200-1, ZX 330, ZX 450, ZX 650, ZX 850 EX 270-1, EX 300-1, EX 400-1 AND EX 4505. ALSO KOMATSU EXCAVATORS PC400, KOMATSU PC 450-6, KOMATSU PC 750-6. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW, THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA-600-3, WA-600-6, WA30, WA-40, WA 50. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - WE ARE INTERESTED IN BUYING JOHN DEERE EXCAVATORS 790, 495 & 595 AND HITACHI EXCAVATORS EX 2701, EX 270-5, EX 300-1, EX 400-1 AND EX 4505. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,300-5 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 19931995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE.. MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410. EMAIL: DEANDRS@VERIZON.NET; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5. EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 77

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

2017 New Holland C232, 2 Speed, Open ROPS, EH Controls, Block Heater, Turn Signals, 78” Low Profile Bucket with Bolt on Edge kwietbrock@ronsonequipment.com 11 JM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 11-12 EB

2015 Grove GHC 55 Tele Crawler, 55 Ton, 100’ Main Boom + jib Aux Hoist, Certified 2500 Hrs, original owner, Cleveland, Ohio ...............................................................................CALL 11-12 EB Call Andy Forepaugh 216-316-1511

2014 Manitowoc 8000 80 Ton Crawler, Request Boom Jib Combination Certified, Cleveland, Ohio ..........................CALL Call Andy Forepaugh 216-316-1511 11-12 EB

2007 Hyundai R320LC-7A, 0% for 36 Mos Available, Heat, AC, 13’3” Arm, 36” Grouser Pads, Pattern Changer, Add’l Cntrwht, Cummins QSC Dsl Eng, 54” Digging Bkt, 39’2” Digging Reach, 3615 Hrs.............................................$95,000 11 JM Call George 219-696-8911

(2) available 78” DD120C, 8 amplitude..........$50,000/each 800-283-1336 11 JM

(4) available 78” DD120B, one with I/C ................................. ..........................................................$30,000-$65,000/each 800-283-1336 11 JM

(2) available 78” DD120C, 8 amplitude, pass counting, temperature............................................................$50,000/each 800-283-1336 11 JM

SEE YOUR BARGAIN AD IN

COLOR

ONLY $60 EXTRA FOR TWO INSERTIONS

Next Issue Closes June 1st 2017 Case TR270, S/N NHM430091, 1223 Hours, Cab/Air, 2 Speed, Newer 12” Tracks, New Door and Glass .............................................................................$45,1500 Call Steve @ 630-878-8765 11 JM

2016 Case TR270, 3739 Hrs, Cab/Air, 2 Speed, Hyd Coupler, GP Bucket...............................................$39,900 11 JM Call Steve @ 630-878-8765

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

Page 78 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Ponca City, OK Thurs., June 2, 2022 For: Retirement, 100% Liquidation, Wyatt Pipeline One • Las Vegas, NV Sat., June 4, 2022 For: Late Model Construction Equipment & more • McGregor, TX Tues., June 7, 2022 For: Retirement, 100% Liquidation, Wyatt Pipeline One • Long Island, NY Sat., June 11, 2022 For: Large Job Completion, Masonry Contractors • Carlsbad, NM Tues., June 14, 2022 For: Retirement, 100% Liquidation, Wyatt Pipeline One • Arnegard, ND Wed., June 15, 2022 For: Retirement, 100% Liquidation, Wyatt Pipeline One

June 24, 2022 • Chehalis, WA June 28, 2022 • Northeast Regional Event June 28-30, 2022 AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401 • Online Auctions May 5 – July 25, 2022 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Live Online Sat., June 11, 2022 For: Sacramento, CA Monthly Public Auction • Live Online Fri., June 24, 2022 For: Woodburn, OR Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO

• Middletown, NY Thurs., June 16, 2022 For: Farm & Construction Equipment

• Online May 31, 2022

• Atlantic City, NJ Sat., June 18, 2022 For: Late Model Rental Fleet Construction Equipment & more

• Online June 14, 2022

• Amma, WV Thurs., June 23, 2022 For: Estate Auction, Late Model Construction Equipment & more

• Online June 7, 2022

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• Mid-New England Sat., June 25, 2022 For: Retirement Auction. Construction Equipment & more

• Online June 1, 2022

• Dallas/Ft. Worth, TX Wed., June 29, 2022 For: Rental Fleet Construction Equipment Auction

• Online June 15, 2022

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only! • Phoenix, AZ June 3, 2022 • Sacramento, CA June 8, 2022 • Grande Prairie, AB June 8-10, 2022 • Great Plains Regional Event June 16, 2022 • Southeast Regional Event June 17, 2022 • Houston, TX June 21-22, 2022 • Great Lakes Regional Event June 23-24, 2022 • Las Vegas, NV

• Online June 8, 2022

BLACK STAR ACA www.blackstaraca.com 800-610-2192 • Live Virtual Auction Thurs., June 9, 2022 • Live Virtual Auction Tues., June 21, 2022 COMMOMWEALTH OF PA govplanet.com 855-464-4842 • Online Closes July 5, 2022 For: PennDOT Annual Heavy Equipment Auction DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., June 4, 2022 For: Construction Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

J.M. WOOD AUCTION COMPANY www.jmwood.com 334-264-3265

• Pendleton, IN Fri., June 17, 2022 For: 30th Annual Summer Auction

• Montgomery, AL June 14 - 16, 2022 For: 49th Annual Summer Auction

• Greencastle, IN Tues., July 12, 2022 For: Greencastle Heavy Equipment Rentals HANSEN AUCTION GROUP www.hansenauctiongroup.com 920-383-1012 • Online May 23 – June 7, 2022 For: Construction Equip., Heavy Trucks, Trailers & more • Online May 16 – June 6, 2022 For: Farm, Equipment & Misc. • Online June 3 - 7, 2022 For: Construction Equipment, Heavy Trucks, Trailers & more • Online June 9 – 13, 2022 For: Pike Heavy Equipment, Truck, Trailer & Farm Equipment HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., June 10, 2022 For: Truck, Trailer & Equipment Auction HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • Online June 7 - 14, 2022 For: JEM Logging & Mill Equipment

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • Online Wed., June 1, 2022 For: Vehicles & Equipment Auction • Online Thurs., June 2, 2022 For: Construction Equipment • Online Tues., June 7, 2022 For: Government Auction • Online Wed., June 8, 2022 For: Ag Equipment Auction • Online Thurs., June 9, 2022 For: Truck & Trailer Auction • Online Wed., June 15, 2022 For: Vehicles & Equipment Auction

• Online • Online Thurs., June 16, 2022 June 9 - 16, 2022 For: Kenmore Heavy Equipment, For: Construction Equipment Contractors Equipment & Vehicles RES AUCTION SERVICES www.RES.bid JEFF MARTIN 833-SOLD-RES AUCTIONEERS, INC. • Mt. Sterling, KY www.jeffmartinauctioneers.com Fri., June 3, 2022 601-450-6200 For: Construction Equipment • Ladson, SC Consignment Auction Wed., June 1, 2022 For: Live & Online RON GILLIGAN AUCTIONS • Glencoe, MN www.rgilliganauctions.com Sat., June 11, 2022 814-237-0189 For: Summer Construction & Truck Public Auction • Petersburg, PA • Pelzer, SC Sat., May 28, 2022 Thurs., June 16, 2022 For: Absolute Public Auction For: Live & Online Stickler Equipment • Kissimmee, FL Wed., June 22, 2022 ROSEN & COMPANY, INC. For: Live & Online www.rosenandcompany.com • Evansville, IN 216-990-1831 June 24 - 25, 2022 • Smithville, OH For: Live & Online Fri., June 10, 2022 For: Trucking MANASSE AUCTIONEERS Company/Equipment Surplus www.manasseauctions.com Auction 607-692-4540

• Virtual Live Wed., June 1, 2022 For: Surplus Liquidation Strange • New Milford, PA Corporation Fri., June 17, 2022 • Virtual Live For: Construction Equipment, Wed., June 29, 2022 Trucks, Trailers & Pipeline For: Surplus Liquidation Charles Equipment J. Merlo, Inc. I.R.A.Y. AUCTION www.iraymn.com 320-968-7230

MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311

• Online Only Wed., June 22, 2022 For: Heavy Equipment, Semi, Truck, Trailer Consignment Auction

• Online Ends June 16, 2022 For: Hilltop Companies: Excavators & Rock Trucks

RTI AUCTIONS www.teitsworth.com 585-243-1563 • Online May 24 - 31, 2022 For: May NetAuction Edition 2

SHERIDAN REALTY & AUCTION COMPANY www.sheridanauctionservice.com 517-676-9800 • Online Wed., June 22, 2022 For: Schafer Lawn & Snow Retirement Sale STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online May 24 - 31, 2022 For: Estate Construction & Concrete Equipment Auction • Timed Online May 26 – June 7, 2022 For: DNB Energy Services Inc Retirement Auction • Timed Online June 3 - 8, 2022 For: Steffes Online Auction • Timed Online June 7 - 14, 2022 For: Steffes Truck & Transportation Auction • Timed Online June 8 - 15, 2022 For: Erickson Contract Surveying Inc. Reduction Auction • Timed Online Tues., June 14, 2022 For: Donald Boehm Estate Auction • Timed Online June 17 - 22, 2022 For: Online Steffes Auction • Timed Online June 22 - 29, 2022 For: Construction Consignment Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Online Virtual Sat., June 11, 2022 For: Public Auction WORLDNET AUCTIONS, INC. www.worldnetauctionslive.com 843-426-4255 • Greeleyville, SC Fri., June 3, 2022 For: Huge Construction, Truck & Trailer Auction

SAMMY P AUCTION SERVICES www.sammyp.com 860-564-9400

YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990

• Plainfield, CT Fri., June 24, 2022 For: Homecoming Auction

• Findlay, OH Wed., June 1, 2022 For: Ohio Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 79

CON N S T R U C TI T ION E Q U IPP M E N T EQ

AUCTI T OONN THURSDA AYY JUNE 2

DA7210

Bidding s tar ts to cl os e at 10 a.m . C S T

‘20 CAT 140 motor grader

ALL ITEMS SELL NO RESERVE!

DK1989 Klaus-Gerd HOES tile plow

DI1228 ‘00 Freightliner Classic XL dump truck

DI1229 ‘96 Peterbilt 379 dump truck

DK3691 ‘18 Komatsu PC88MR-10 mini excavator

DN7972 ‘04 John Deere 655C Series II track loader

DN7377 ‘15 CAT 972M wheel loader

DK1991 ‘13 Hyundai HL D 780XTD-9A wheel loader

N7375 ‘99 CAT 980G DN heel loader wh

D DM7321 ‘13 Takeuchi TL12 s skid steer loader

DM M5423 ‘12 CAT 312D L excavator

LIN

DK3692 ‘19 Komatsu PC138USLC-11 excavator

MF9553 ‘12 CAT 336E L excavator

INVENTORY INCLUDES: SERVICE TRUCKS: ‘11 11 Ford F550 Super Super Duty, Duty ‘09 09 Int’l Int l 7400 DUMP TRUCKS: ’07 07 Kenworth T800. T800 ‘04 04 Int Int’ll 5900i BACKHOES: ‘08 08 Case 580M M Series III III, ‘06 06 John Deere 310SG BUCKET TRUCK: ‘13 Ford F550 Super Duty EXCAV VA ATOR: ‘97 CAT AT 330B L MINI EXCAV AVATOR: ‘09 Kubota KX080-3 TRACK K LOADER: ‘97 CAT AT 953C WHEEL LOADER: ‘98 CAT 938G MOTOR GRADER: ‘01 John Deere 770CH DOZER: ‘02 John Deere 1050C and more. All items are sold “A “AS IS.” 10% buyers premium applies. Aaron McKee TX T X License #16401. 866.608.9283

p wavvee.com ccoom BID NOW W! purple

Page 80 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Frey & Sons Conducts Equipment Auction in Holland, Ohio

rey & Sons Auctioneers held an auction for the excess equipment and fleet update program of Crestline Paving and Excavating, as well as equipment from additional area contractors in Holland, Ohio, on May 19. Up for bid at the auction was a significant lineup of well-maintained backhoes, dozers, excavators, wheel loaders, service trucks and support equipment. While the auction attracted a sizable crowd of onsite bidders, the sale drove heavy online bidding as well. Frey & Sons is a family-owned and operated business spanning three generations of involvement in the company. Based in Archbold, Ohio, the company provides real estate brokerage services, equipment appraisal services and site based and online equipment auctions throughout the year.  CEG (All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.) Lloyd Pant of Automatic Septic and Well looks over the service trucks at the auction.

Frey & Sons’ Kevin Frey (L) and his father, Robert Frey, monitored the auction to make sure everything ran smoothly. Doug Merrill of K&G Automotive looked over the excavators for use to wreck cars for scrap at his equipment yard.

Auctioneer Roger Ford calls out the bids. Maynor Anzueto of Importadora Angoz S.A. came in for the auction from Guatemala. He was pleased to be taking home this paver. Nate’s Specialty Services’ Nate Clevenz puts this Takeuchi TB035 mini-excavator through its paces at the auction.

Milo (L) and sister, Annabelle, try out this 330L Cat excavator while their father, Rob Randall of Randall Brothers, considers a bid.

Midwest Contractor’s Gary Sites admired this 1964 Link-Belt LS98 crawler crane up for bid at the auction.

Murphy Tractor & Equipment’s Ryan Heckel stopped in at the auction to catch up with customers and take in the auction activities.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 81

HANSEN AUCTION GROUP ONLINE AUCTIONS BID NOW AT HANSENAUCTIONGROUP.COM

Construction Equipment, Heavy Trucks, Trailers and More!

Don’t Miss Out! Highest Bid Wins! Featured items: John Deere 490 Excavator; John Deere 550G Crawler/Dozer; Vermeer V7550 Trencher; John Deere MST 2200 Morooka Crawler Dumper; 1994 Ford F700 Box Truck - Has Title; 1994 Ford F Series Flatbed Truck - Has Title; 1998 Ford F800 Service Boom Truck - Has Title; Tandem Axle Tag Trailer, NO TITLE; and Raymond Walk Behind Forklift. PLUS tractor & farming accessories, shop equipment, attachments, tires & more!

Open House Friday, June 3rd from 10:00am - 3:00pm N7951 State Highway 13 • Westboro, WI 54490 Online Bidding Ends June 7th BID NOW AT HANSENAUCTIONGROUP.COM For more information call 715-539-6295

June 2022 Pike Heavy Equipment, Truck, Trailer, and Farm Equipment Consignment Auction

Excavators, Loaders, Telehandlers, Scrapers, Skid Steers, Dump Trucks, Crane Trucks, Semi Trucks, Trailers, Ag Equipment, Forestry Equipment, Attachments, Vehicles, Recreational Items & More!

Bidding Starts at $1! Highest Bid Wins! Open House: Thursday, June 9th from 8:00am - 3:00pm Friday, June 10th from 8:00am - 3:00pm Saturday, June 11th from 8:00am - 12:00pm 2001 15th St N • Princeton, MN 55371 Online Bidding Ends Monday, June 13th LEARN MORE AT HANSENAUCTIONGROUP.COM For more information call 763-389-5700

TERMS: 10% Buyers Fee. Bryce Hansen, registered WI auctioneer #225

BID NOW AT HANSENAUCTIONGROUP.COM

Page 82 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rosen/Buddy Barton Auctions Host Sale in Cleveland

osen & Company, in conjunction with Buddy Barton Auctioneers, held a heavy equipment, commercial trucks, trailers and support equipment along with collectable automobiles in Cleveland on May 20. The live and online auction drew active onsite bidders competing with online equipment buyers for the winning bids. Rosen & Company is known throughout the northeast Ohio region for its auctions of construction and landscaping equipment; commercial and residential real estate; and collectible items. For more information, visit rosenandcompany.com.  CEG (All photographs in this article are Copyright 2022 Construction Equipment Guide. All Rights Reserved.)

Alternative Landscaping’s Matt Wiegand was pleased to have landed the winning bids on skid steer attachments, a generator and other equipment. Keith Erving of RME Trucking came to the auction in search of trailers and dump trucks.

Dan Gilliam of Willoughby Auto Spa looked over the trucks up for bid.

(L-R): Cousins Joe Frato and Joe Frato of Frato Products join Bob Tripodi to review the wheel loaders that were up for auction.

Rosen & Company’s Marvin Schiff (L) welcomes Bill Suglia of Suglia One Excavating to the auction.

Goje, the auction dog, keeps an eye on the auction activities.

Ritchie Discontinues Acquisition Attempt of Euro Auctions Ritchie Bros. Auctioneers announced that its wholly owned indirect subsidiary, Ritchie Bros. UK Holdings Ltd. (“RB Purchaser”) is discontinuing the Phase 2 review by the UK Competition and Markets Authority (the “CMA”). The Sale and Purchase Agreement dated Aug. 9, 2021 (the “Agreement”) pursuant to which the RB Purchaser had agreed to purchase Euro Auctions Limited, William Keys & Sons Holdings Limited, Equipment & Plant Services Ltd and Equipment Sales Ltd. will automatically terminate on June 28, 2022.

The decision follows the referral of the proposed acquisition to a Phase 2 review by the CMA. Amongst other things, completion of the Agreement is conditional on receipt of clearance from the CMA on terms satisfactory to the RB Purchaser, but after extensive consideration the RB Purchaser does not believe there is any realistic prospect for approval by the CMA on such terms given the significant concerns raised by the CMA to date. The company intends to issue redemption

notices with respect to the $600 million aggregate principal amount of 4.750 percent senior notes due 2031 and the C$425 million aggregate principal amount of 4.950 percent senior notes due 2029 previously issued to finance a portion of the cash consideration for the proposed acquisition and expects to complete the redemptions within 10 business days. Ann Fandozzi, the company’s chief executive officer, said: “We are disappointed by the decision taken by the CMA to refer the proposed acquisition to a Phase 2 review and

respectfully disagree with their views. While we believe the proposed acquisition would have accelerated our strategy, we remain committed to forging ahead in our transformational journey to become the trusted global marketplace for insights, services and transaction solutions. We will continue to seek out and execute on organic investments and key acquisitions to accelerate our pace in achieving our ultimate vision.” For more information, visit RitchieBros.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 83

Page 84 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Fabick Hosts First Round of Cat Global Operator Challenge FABICK from page 12

Mike Wallace (L) of Diestelkamp in the South CountySt. Louis metro area and Shane Boyer of Fabick Cat discuss the different operating stations at the Caterpillar Operator Challenge.

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. JUNE/JULY 2022 CRANE SAFETY COURSES May 31 – June 3, 2022 Overhead Crane Inspector, Orlando, FL June 1 – June 2, 2022 Overhead Crane Operator, Cincinnati, OH June 7 – June 9, 2022 Aerial Work Platform Train the Trainer, Houston, TX June 7 – June 9, 2022 Boom Truck Operator Train the Trainer, Orlando, FL June 13 – June 16, 2022 Overhead Hoist Maintenance, Houston, TX June 13 – June 17, 2022 Mobile Crane Operator, Cincinnati, OH June 14 – June 17, 2022 Mobile Crane Inspector, Orlando, FL June 20 – June 24, 2022 Mobile Crane Train the Trainer, Houston, TX June 21 – June 23, 2022 Rigging Inspector, Cincinnati, OH June 21 – June 24, 2022 Overhead Crane Train the Trainer, Orlando, FL June 27 – June 28, 2022 Crane Assembly & Disassembly Director, Orlando, FL June 27 – June 28, 2022 Qualiﬁed Signal Person, Houston, TX June 29 – June 30, 2022 Critical Lift Planning & Lift Director, Houston, TX June 29 – July 1, 2022 Qualiﬁed Rigger Level 2, Orlando, FL July 5 – July 7, 2022 Forklift Train the Trainer, Orlando, FL

Participating in the operator challenge are Josh Froese (L) and Allyn Sensel, both of Baxmeyer Construction in Waterloo, Ill.

Ralph Kelly Moran (L) of Galaxy Underground and Fabick Cat’s Brian Chinnici on the course of the Caterpillar Operator Challenge.

July 5 – July 8, 2022 Mobile Crane Inspector, Houston, TX July 6 – July 8, 2022 Qualiﬁed Rigger LV 2, Cincinnati, OH July 12 – July 13, 2022 Qualiﬁed Signal Person, Orlando, FL July 12 – July 14, 2022 Boom Truck Train the Trainer, Houston, TX July 12 – July 14, 2022 Aerial Work Platform Train the Trainer, Cincinnati, OH To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com

Date: Tuesday, September 27, 2022 – 3:00 PM DEMING LOGGING SHOW 2022 Training/Professional Development Dates: June 11 – June 12, 2022 For further information, contact AGC: Phone: 703/548-3118 Fax: Location: Deming Log Show Grounds 240/396-2470 Email: info@agc.org 3295 Cedarville Rd, Bellingham, WA 98226 Description: Deming Log Show is a nonprofit organization beneCONSTRUCTION ASSOCIATION OF MICHIGAN (CAM) fiting busted up loggers and their families. Home to the Annual Formerly Builders Exchange of Detroit and Michigan. CAM is a Deming Logging Show, and other events. Originally established professional association of design and construction professionals in 1963, our show was inspired by the need to financially assist which provides service, information, and assistance to the con- loggers who were injured in the woods. Our grounds come alive struction industry. Members include architects, engineers, sup- the second full weekend in June each year for our annual Deming pliers, manufacturers, and contractors. Logging Show with events and exhibitions to display the skills, Construction Association of Michigan 2022 Golf Season tools, and technology used in the logging industry. A nonprofit Registration is Open! organization, the Deming Logging Show relies on the support of This year’s schedule features four value-packed outings at local people, businesses and volunteers to support families of remarkable prices. loggers who have been injured or killed on the job. ASSOCIATED GENERAL CONTRACTORS (AGC) These outings are perfect opportunities to bring your staff and The Deming Log Show features 31 events and exhibitions demonAGC EVENTS CALENDAR: clients out for a great afternoon of golf! strating the talents and strengths of local loggers. All AGC Web-Eds are scheduled in Eastern Standard Time (EST) Don't miss axe throwing, speed climbing, log rolling, chainsaw Conferences are scheduled using the local time zone where 2ND ANNUAL SPRING OLD CONSTRUCTION & MINING bucking and the ironman. The show starts at 1pm each day with the event takes place. EQUIPMENT SHOW eliminiations starting at 11am on Saturday only. Training/Professional Development Dates: Saturday, May 28 – Time: 10:00 AM to 6:00 PM For more information on the Deming Loggings Show 2022, conAGC’s Virtual Lean Construction Education Program Sunday, May 29 – Time: 9:00 AM to 5:00 PM tact Deming Logging Show Grounds, 3295 Cedarville Road, (https://www.agc.org/learn/education-training/events/agcs-virtuLocation: Harrison Coal & Reclamation Historical Park Bellingham, WA 98226. Phone: 360/592-2423. al-lean-construction-education-program-0) 43672 Stumptown Road, New Athens, Ohio www.demingloggingshow.com. Date: Tuesday, June 7, 2022 – 12:00 PM (Ohio 519 between US 22 & New Athens, Ohio). Training/Professional Development Description: Show includes operating and static displays of con- FEDERAL CONTRACTORS CONFERENCE Project Manager Development Program (PMDP) struction equipment, mining equipment, crawlers, and trucks for Date: Mon, June 20, 2022 - Wed, June 22, 2022 (https://www.agc.org/learn/education-training/events/clonesome digging fun or static display. Food will be available on the Place: Washington, DC project-manager-development-program-pmdp) grounds! Swap and Flea Market areas! (https://fedcon.agc.org/) Date: Monday, June 13, 2022, 10:00 AM We will be celebrating the 30th Anniversary of the Harrison Coal AGC’s Federal Contractors Conference brings federal agencies Training/Professional Development & Reclamation Historical Park, Incorporated in 2022. directly to the table alongside attendees to generate more canVirtual Construction Supervision Fundamentals (CSF) The Spring Show is dedicated to the men and women that lost did dialogue and practical information for contractors on issues (https://www.agc.org/learn/education-training/events/virtualtheir lives in the construction and mining industries, and to those specific to the federal space such as: Upcoming Projects, construction-supervision-fundamentals-csf-course-1) who worked in the construction and mining industries no longer Forecasts, and Budgets; Executive Orders and Regulations; Date: Monday, June 27, 2022, 10:00 AM with us. The show is also dedicated to the men and women that Legislative Changes; Contracting and Design Issues; Acquisition Training/Professional Development served our country and no longer with us. Updates. 2022 IT Conference (https://itconference.agc.org/) Cost: $5.00. Who Attends: Executive, business development and proposal Date: Tuesday, August 16, 2022 (8:00 AM) management personnel for design and construction companies Location: Chicago, Illinois VIP TIGER GAME TAILGATE of all sizes and at all levels of the industry involved or interested Technology Date: Tuesday, July 26, 2022 in the federal market should attend. This includes those from Five-Part Webinar Series: Top 10 Safest Construction CAM members and their guests are invited to join us for a Detroit construction prime and subcontractors, engineering companies, Companies in America Tigers Tailgate and evening baseball vs. the Padres. architecture firms and suppliers. In addition, the conference (https://www.agc.org/learn/education-training/events/five- For more information on this event, contact CAM: provides excellent informational, networking and marketing part-webinar-series-top-10-safest-construction-companies- Phone: 248/972-1000 Fax: 248/972-1001 opportunities for lawyers, compliance programmers, IT America) Email: cam@buildwithCAM.com providers, and surety bond producers.

Events are subject to change, check websites for updates

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 85

Schafer Scha afer Lawn n & Snow

RETIREMENT RET TIREMEN NT SALE ONLINE ONLIN NE AUCTION: WED, W JUNE 22 Items tems located llo ocated at 6025 Aurelius Aureliu us Rd, Lansing, MI

EVEN TEXTERS AND DRIVERS HATE TEXTERS AND DRIVERS. STOPTEXTSSTOPWRECKS.ORG

Inspections: Wednesday, June 8 (11am-1pm m) & Tu Tuesday, June 21 (4-6pm)

Questions? Call us!

(517) 676-9800 www.SheridanAuctionServ vice.com

Page 86 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC ....................................................10 ALTA EQUIPMENT COMPANY................................................................88 AMERICAN STATE EQUIPMENT ..............................................................7 AMULET ..............................................................................................30,32 ASTEC KPI-JCI ........................................................................................49 BANDIT INDUSTRIES INC ..................................................................52,53 BANE-WELKER ..........................................................................................6 BARGAINS................................................................................................77 BLUE RIDGE TRACTOR ..........................................................................26 BOBCAT ENTERPRISES ........................................................................20 BOYD & SONS ........................................................................................33 BROOKS TRACTOR ................................................................................17 CONDUIT SEARCH GROUP....................................................................72 CONSTRUCTION EQUIPMENT GUIDE ............................................46,76 CSTK JCB ................................................................................................20 CUSTOM MADE PRODUCTS ..................................................................26 D ROCK GRIZZLY ....................................................................................55 DON SMOCK AUCTION CO ....................................................................85 DOOSAN..............................................................................................44,45 DOOSAN PORTABLE POWER................................................................74 ESCO CORP ............................................................................................35 FABICK CAT ..............................................................................................2 FAE USA INC............................................................................................56 FARM-RITE EQUIPMENT INC ..................................................................9 FELLING TRAILERS............................................................................38,39 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................28 FOLEY EQUIPMENT CO..........................................................................15 GARY CARLSON EQUIPMENT ..............................................................14 GROVE WORLDWIDE ............................................................................75 HANSEN AUCTION GROUP....................................................................81 HYUNDAI CONSTRUCTION EQUIPMENT ........................................24,25 IRAY AUCTIONS INC ..............................................................................85 JEFF BELZER ..........................................................................................40 JEFF MARTIN AUCTIONEERS INC ........................................................83 JJ SCHECKEL CORP ..............................................................................19 JOHN DEERE ..........................................................................................63 KIRBY-SMITH MACHINERY INC ............................................................21 KLEEMANN ..............................................................................................58 KOBELCO CONSTRUCTION MACHINERY ......................................70,71 KOMATSU AMERICA CORP ..............................................................64,65 KUBOTA EXCAVATOR ............................................................................73

LABOUNTY MANUFACTURING INC ......................................................30 MAVERICK ENVIRONMENTAL................................................................55 MCCANN INDUSTRIES INC ......................................................................6 MCCOY CONSTRUCTION & FORESTRY ..............................................11 MECALAC NORTH AMERICA LLC ..........................................................27 METSO OUTOTEC ..................................................................................51 MID COUNTRY MACHINERY ..................................................................37 NATIONAL ATTACHMENTS ....................................................................30 NORTH AMERICAN ATTACHMENTS ....................................................32 PAT KELLY EQUIPMENT CO INC ..........................................................18 POWERSCREEN MW DEALER GROUP ................................................57 PURPLE WAVE INC ................................................................................79 RACKERS EQUIPMENT CO ....................................................................55 RAMMER ..................................................................................................50 RB SCOTT COMPANY INC......................................................................50 RITCHIE BROS. AUCTIONEERS ............................................................87 ROAD BUILDERS MACHINERY ..............................................................13 ROCK MACHINERY ................................................................................56 ROGERS BROTHERS CORPORATION..................................................36 ROLAND MACHINERY INC ......................................................................5 SANY AMERICA INC................................................................................69 SENNEBOGEN ........................................................................................61 SHERIDAN REALTY & AUCTION CO ....................................................85 STAR EQUIPMENT LTD ............................................................................6 SUMMIT SUPPLY GROUP ......................................................................18 SUNBELT RENTALS INC ..........................................................................3 TERAN INDUSTRIES INC ........................................................................31 TEREX FUCHS ........................................................................................59 TOWMASTER INC. ..................................................................................43 TRI-STATE TRAILER SALES ..................................................................41 VLP AN EQUIPMENTSHARE COMPANY ..............................................16 WEILER GRADER ..............................................................................66,67

OHIO STATE SUPPLEMENT COLUMBUS EQUIPMENT CO ................................................................12 COMPANY WRENCH ................................................................................3 EQUIPMENT CORP OF AMERICA ............................................................9 GORILLA HAMMERS ................................................................................1 JCB OF OHIO ............................................................................................5 ROKBAK ..................................................................................................11 SOUTHEASTERN EQUIPMENT CO..........................................................7 THE MCLEAN CO ......................................................................................4

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 28, 2022 • Page 87

Unreserved public equipment auctions Plan for tomorrow with pre-approved ﬁnancing – PurchaseFlex™ Financing*

1 of 5 – Caterpillar 740B | Great Plains Regional Event

2017 Caterpillar 980M | Great Plains Regional Event

Caterpillar D8T | Great Plains Regional Event

2 of 4 – John Deere 310SG 4x4 | Great Lakes Regional Event

Caterpillar D6R XW Series III | Great Lakes Regional Event

5 – Caterpillar 631E | Phoenix

2014 Caterpillar 320 EL | Southeast Regional Event

John Deere 850K LGP | Southeast Regional Event

Caterpillar 140H | Great Plains Regional Event

64,215+ items in 85+ auctions including Phoenix, AZ Sacramento, CA Great Plains Regional Event Southeast Regional Event Houston, TX

Jun 3 Jun 8 Jun 16 Jun 17 Jun 21–22

Great Lakes Regional Event Las Vegas, NV Chehalis, WA Northeast Regional Event

Jun 23–24 Jun 24 Jun 28 Jun 28–30

Financing & leasing available

Online bidding information

Up to 100% financing, with no money down.

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

More items added daily Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, Auctioneer Chad M. Johnson # 17668, Auctioneer Kevin L Perry # 1763, Auctioneer James L Valentine # 1764, Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701, Auction Company Bond #0470724, Auctioneer Patrick J. Hicks Bond # 0470727, Auctioneer Chad M. Johnson # 17668, Auction Business License #AB303, Auctioneer Trevor J. Moravec # AU3889, Auction Company License # 001348, Auctioneer Frederick R. Vilsmeier # AUNR003087, Auction Company License # 1981, Motor Vehicle Dealer License #1539, Used Motor Vehicle Dealer License #2647, , Auction Company License #AY00208L, Motor Vehicle Dealer License #DLR25867, Auctioneer Chad M. Johnson # 17668, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728 ** OAC. Terms & conditions apply. See rbauction.com/financing.

Page 88 • May 28, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

THE ONLY AUTH HORIZED

DEALER R IN MICHIGAN, IL LLINOIS & NW IND DIANA

Your Only Authorized Dealer for S Sales, Se ervice & Rentals 844.Go2.AL LTTTA A

alt ltaeq quipment..com