Midwest 9 May 8, 2017 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

Inside

Midwest Edition

www.constructionequipmentguide.com

May 6, 2017 • Vol. XX • No. 9 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

S.D. Sees Rise in Construction Employment

Crews Complete Flood Mitigation Project…12

Initial construction began in 2013 with the replacement of the I-39/90 and WIS 11 (Racine Street) interchange in Janesville. Roadway Contractor Uses EPS Geofoam…22

WisDOT Invests $1.2B to Reconstruct, Expand I-39/90 Fort Wayne City Council OKs Tunnel Project see JOBS page 38

By Irwin Rapoport

CEG CORRESPONDENT Fabick CAT Hosts Season Opener…26

Table of Contents.............. 4 Attachments Section............ .................................... 35-37 Truck & Trailer Section........ .................................... 53-59 Recycling Section...... 67-82 Business Calendar............ 85 Auction Section.......... 87-99 Advertisers Index............ 98

SIOUX FALLS, S.D. (AP) A new report shows South Dakota is employing more people in construction than ever before. The report by the Associated General Contractors of America found the state added about 1,000 construction jobs in March, the Argus Leader reported. That’s more than any other state except Alaska and Delaware. Sioux Falls has seen an increase in construction jobs since 2012 because of the city’s growth. South Dakota’s labor department said construction was the seventh biggest employer of Sioux Falls residents in 2015.

The Wisconsin Department of Transportation’s (WisDOT’s) $1.2 billion reconstruction and expansion of Interstate 39/90 in south-central Wisconsin is well under way. Initial construction began in 2013 with the replacement of the I-39/90 and WIS 11 (Racine Street) interchange in Janesville. Since then, many of the Interstate’s bridges and interchanges have been reconstructed and widened to make room for Interstate expansion. “There’s still plenty of bridge work to be completed throughout the corridor,” said Steven Theisen, I-39/90 project communications manager. “However, what’s been completed to date allows us to move forward on the actual expansion of I-39/90, between Beloit and Madison.” The work, funded mainly by federal and state dollars, extends 45 mi. (72.4 km) from the Illinois state line to the U.S. 12/18 interchange near Madison. Originally built in the

early 1960s, the Interstate is being expanded from two lanes in each direction to three lanes along much of the route. A portion of the Interstate through the Janesville area will be expanded to four lanes in each direction to meet traffic needs in that area. Completing portions of the work are general contractors the Rock Roads Company Inc., Michels Corporation and the Hoffman Construction Company (HCC). HCC is doing the northbound mainline pavement on IH 39 from Dane county line North (8 mi. [12.9 km]) and the I-39 County Trunk Highway North interchange. “All 11 interchanges along the corridor have outdated design features that contribute to safety concerns,” Theisen said. “Without improvements, all sections of I-39/90 are expected to operate at unacceptable levels of service, meaning unstable traffic flow and stop-and-go conditions, creating significant travel delays and increased safety issues.” The number of traffic-related crashes along I-39/90, between the Illinois state line see WISDOT page 66

FORT WAYNE, Ind. (AP) A $187.7 million construction contract has been approved to build the Three Rivers Overflow Reduction and Protection Tunnel in northeastern Indiana. The project is part of a long-term plan to reduce the average number of combined sewer overflows in Fort Wayne from 76 to four. Construction is expected to take 4-and-a-half years. The Fort Wayne City Council awarded the contract to Salini Impreglio/S.A. Healy Joint Venture — the lowest of five bidders, the Journal Gazette reported. This will be the joint venture’s fourth combined sewer overflow project. Tunnel boring machines will run 24 hours a day and five or six days a week, said Mike Kiester, city see OVERFLOW page 38

Page 2 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2012 CAT 316E $146,000 S/N DZW00702 - 1,901 hrs

2004 CAT 308C $42,000 S/N KCX00480 - 2316 hrs

2004 CAT 320C $49,000 S/N PAB01573 - 12,005 hrs

2005 CAT 325C $72,500 S/N BFE01692 - 6360 hrs

2003 CAT 140H $83,200 S/N APM00753 - 12,323 hrs

2008 CAT 963D $100,000 S/N LCS00816 - 8,218 hrs

2002 CAT 938G $47,000 S/N 6WS03409 – 17,037 hrs

2003 CAT 163H $68,000 S/N ARL00260 - 8805 hrs

2014 CAT D6N XL $204,700 S/N PER00492 - 992 hrs

2007 CAT D6N LGP $95,000 S/N DJY00495 - 7,888 hrs

2008 CAT D5KLGP $51,500 S/N YYV00267 - 10,416 hrs

2009 CAT D6TLGP $124,000 S/N WCG00555 - 8747 hrs

2013 CAT 279C2 $56,900 S/N KWB01295 - 216 hrs

2015 CAT 236D $37,500 S/N BGZ01904 - 634 hrs

2003 CAT 287 $22,500 S/N CNY00346 - 1922 hrs

2009 CAT 262C $26,500 S/N MST02743 - 2742 hrs

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ May 6, 2017 â€˘ Page 3

2006 Mantis s MT 6642T ............ $32,500

2003 Cat 825G Series II Padfoot . $330,000

2003 Cat 815F Padfoot adfoot .......... $209,500

Canopy, JD 4045T 5T 99HP diesel, 4WD, crab steer, 6,600 lb. capacity, 42â€™ reacch, 48â€? x 48â€? carriage, 13.00-24TG foam ÂżOOHG WLUHV OEV KUV

A/C, 4-50â€? padfoot drums w/cleaners, 375HP diesel, 3 speed powershift trans., 15â€™1â€? hydraulic aulic leveling blade, 72,300 lbs., 5,255 hrs. ....................#1 ........#11215

Cab with A/C, 4-39â€? padfoot adfoot drums with cleaners, Cat 3176 240HP diese el, 12â€™ hydraulic leveling blade, 45,760 lbs., 5,064 hrs.. ............................... #10521

&DW 0 Z 6FDULÂżHU

2011 Cat D4 4K LGP ................. $69,500

1999 Grove RT860 Crane .... $169,500

2010 Cat 950H ....................... ..................... $124,500

Cab with A/C, Cat Acert 6.6 158H HP diesel, 4WD, 14â€™ PROGERDUG IURQW VFDULÂżHU SRZHUVKLIW MR\VWLFN FRQWUROV 14.00x24 tires, 37,064 lbs, 2,303 hrs. ........... #10173

444HP Tier 4 diesel, d 41.9 ton cap. (30.3 yds.), Allison HD4560 0 trans., 6WD, heated box, rear view camera, rig saver er, headache rack, auto lube, Magna 29.5 R25 radials, ls, 69,300 lbs., 3,544 hrs. ... #10961

Rough Te errain, 60 ton capacity, cab with A/C, 250HP Cummins diesel, 115â€™ 4 section boom, 35â€™ to Âś MLE VWDELOL]HUV GXDO ZLQFK [ WLUHV RULJLQDO paint, PAT T DS350 load system., 4,771 hrs. ... #8717

Cab with A/C, 300HP diesel, hydraulic q-coupler, 3.75 yrd q-tach bucket, et, lever controls, 3rd valve, ride control, 40,435 lbs., bs., 4,198 hrs. .......... #10371

2013 Caterpiller 272D .......... $35,000

2015 Caterp pillar 262D ............ $39,500

2016 Rome TA AW-20S Tillage Disc sc . $28,500

2012 Kobelco SK485LC-9 K485LC-9 .... $224,500

A/C, 98HP Tiier 4 diesel, pilot controls, 2 spd, 3,200 operating capacity, manual coupler,, aux. hydr.,. air ride seat, performance pkg H1, 74â€? bucket, 8,300 lbss, 665 hrs. ...... #10934

A/C, 74HP Tier4 4i diesel, pilot controls, 2 speed, 2,700 operating capac city, 12.00 x 16.5 tires, hyd. coupler, aux. hydr., 72â€? bucket, b 8,000 lbs., 47 hrs. ..... #BV997

32â€? serrated blades, 12â€? spacing, 9â€™6â€? wide, de, hydraulic lift, rotating pintle hitch, 12.5x15 tires, 352 2 lbs., per disc, 98-120HP recommended, 7,044 lbs. ... .. #ROM014

A/C, 345HP Tier 4 diesel, el, 36â€? pads, 13â€™3â€? stick, 27â€™ 6â€? dig depth, 1-2 way auxiliary iary hydraulics, pattern changer, rear view camera 111,800 00 lbs., 1,674 hrs. .. #10811

2015 Laymor Sweepmaste er 300 ... $21,000

2016 Allied Rammer 1650 ..... $24,850

2012 Cat 725 Articulated .... $214,500

2012 Cat 725 Articulated ticulated ..... $196,500

Canopy, Kubota V1105 24.8HP P Tier 4 diesel, 8â€™ broom, 70 gallon sprinkler syste em, 205/75R14 tires, towable, 3,100 lbs., 75 hrs. ....................... #N4092

2,500 lbs. energ gy class, 540-920 bpm, 23-34 gpm, 26,500-44,100 carrier class, Ram Data Monitor, 2,400 lbs. ................................................ #ACP015

Cab with A/C, Cat C11 Acert 325HP, 25 ton capacity (22.1 yards), 6WD, bed linerr, 23.5R25 tires, 55,000 lbs., 2,375 hrs. ................. ..... #11000

Cab with A/C, Cat C11 303HP diesel, 25 ton capacity (18.8 yards), 6WD, bed liner, 23.5R25 tires, 51,100 lbs., 3,193 hrs. s. ............................... #11001

sales@iltruck.com â€˘ renta al@iltruck.com â€˘ 815-941-1900 Illinois Truck & Equipment 320 0 Briscoe Drive, Morris Illinois 6045 50

www.iltrruck.com

Page 4 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES 12 CREWS COMPLETE MOST CHALLENGING PIECE OF THREE-YEAR PROJECT Road crews recently capped off the third and most challenging piece of a three year project to raise 3 mi. (4.8 km) of road surface of a southwestern Minnesota highway above the 100 year flood mark to thwart habitual flooding by the Minnesota River.

12 34 MANITOU GROUP NAMES RICHARD ALTON PRESIDENT, CEP DIVISION

22 ROADWAY CONTRACTOR USES

MOBILE SCREENS LINES

Manitou Group announced the appointment of Richard L. Alton II as president of the compact equipment product division, effective April 17, 2017.

LIGHTWEIGHT EPS GEOFOAM The scope of work was to replace a box culvert crossing beneath 63rd Street that was used to move water runoff from the golf course to a small pond on the south side of the road.

SEASON OPENER This event kicked off a series of events celebrating Fabick CAT’s 100th anniversary. Guests were invited to see new products on display, enjoy lunch and win door prizes.

RESPONSE TO WORLDWIDE GROWTH

2017 ROAD PROJECTS

34 EFFICIENCY PRODUCTION TO HOST ANNUAL

94 JEFF MARTIN AUCTIONEERS HOSTS ITS FIRST MIDWEST AUCTION

Three-and-a-half-year-old Nicklaus Knuckley, son of Kevin Knuckley and grandson of Paul Knuckley, both principals of Witch Equipment Co., Fort Worth, Texas, loves Construction Equipment Guide (CEG).

www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Twitter

DELIVERS CONSISTENT MATERIAL OUTPUT

78 BANDIT COLOR MAX COLORING SYSTEM NOW AVAILABLE

XX HEADLINE... DEPARTMENTS 85 BUSINESS CALENDAR 85 CLASSIFIEDS 87 COMING AUCTIONS

EQUIPMENT 67 CONTRACTOR ADOPTS PITBULL TO HELP WITH AGGREGATES

35 ARBORWOLF UltraGrinder Attachment 36 HYUNDAI HDB Series Hydraulic Breakers 53 XL SPECIALIZED TRAILERS XL 80 Power Tail Trailer

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910

Facebook

Jeff Martin Auctioneers held a farm and construction equipment public auction in Ottumwa, Iowa, on April 13. The auction, which was the company’s first venture in the Midwest, proved to be a great success.

RECYCLING SECTION

34 CEG REACHES ALL GENERATIONS

78 CEMCO INC.’S COMPACT TURBO 54 VSI

CONTRACTORS AUCTION

MUNICIPAL SAFETY DAY In conjunction with the Michigan Rural Water Association (MRWA), Efficiency Production Inc. is set to host its 11th annual Municipal Safety Day on June 1 from 8 a.m. to 4 p.m. at Efficiency Production’s corporate headquarters in Mason, Mich.

Mobile

3400XT WOOD HOG HORIZONTAL GRINDER

92 NITKE HOSTS 52ND ANNUAL WISCONSIN Nitke Auctions held its 52nd annual Wisconsin Contractors Auction on April 28 and 29 in Wausau, Wis.

Web site

74 MORBARK INTRODUCES NEW VERSATILE

RACINE, WIS.

Minnesota transportation officials unveiled a slate of 2017 road projects on April 13 with a warning: the roster of $1 billion in projects could be the last big spending for years to come.

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz Teddy McKeon

SETUP, PORTABILITY

88 ALEX LYON & SON CONDUCTS AUCTION IN Alex Lyon & Son held an auction in Racine (Mt. Pleasant), Wis., on April 29.

28 MINN. OFFICIALS UNVEIL SLATE OF

68 IROCK’S TS-512 OFFERS HASSLE-FREE

46 MCCLOSKEY INTERNATIONAL INVESTS IN Screening and crushing industry leader McCloskey International has continued its expansion over the past three years, with close to 35 percent growth overall, increased market share, major investments in its manufacturing facilities, and the introduction of a new division.

26 FABICK CAT HOSTS ITS ANNUAL

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Director of Web Services.

68 FINKBINER TO OFFER KPI-JCI, ASTEC

YouTube

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

National Sales Manager 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Toll Free Fax e-mail

773/769-4090 800/632-0233 773/769-4280 jmckeon@cegltd.com

Toll Free Fax e-mail

440/243-9690 800/810-7640 440/243-9691 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Toll Free Fax e-mail

952/353-1770 866/413-4265 952/353-2750 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 5

Quality Used Equipment...with support to back it up

Wirtgen W120F, ‘08, 4,007 hrs...................... Call

Komatsu PC210LC-10, ‘14, 2,714 hrs.. $129,500

DOZERS

OFF HIGHWAY TRUCKS

TRAILERS

Komatsu D39PX-22, ’09, 2,663 hrs.................................... $69,000 Komatsu D61PX-15EO, ‘08, 4,180 hrs................................ $99,000 Komatsu D61PX-23, ’14, 1,838 hrs.................................. $179,000 Komatsu D65PX-15EO, ’06, 11,070 hrs.............................. $59,000 Komatsu D65EX-15EO, ’07, 3,934 hrs.............................. $149,500 Komatsu D65PX-15EO, ‘07, 2,840 hrs................................ $99,000 Komatsu D65WX-15EO, ’07, 3,959 hrs.............................. $157,000 Komatsu D275AX-5, ’03, 23,015 hrs.................................. $79,500

Komatsu HM400-2, ‘11, 7,475 hrs.................................... $199,000 Komatsu HM400-2, ‘11, 7,670 hrs.................................... $199,000 Komatsu HD465-7, ’06, 18,843..........................................$219,500 Komatsu HD605-7EO, ’08, 20,247 hrs.............................. $130,000

Felling FT20LP, ‘03.............................................................. $12,000 Pitts LB52-240 Lowboy, ’12................................................ $49,900

MILLING Wirtgen W60, ’08, 628 hrs................................................ $144,900 Wirtgen W120F, ‘08, 4,007 hrs.................................................. Call Wirtgen W2000, ‘08, 7,798 hrs..........................................$169,500 Wirtgen W2100, ’04, 8,538 hrs..........................................$159,500

Hamm HD120HV, ‘03, 2,690 hrs.......................................... $32,999 Hamm HD120HV, ‘04, 3,211 hrs.......................................... $30,000 Hamm HD+120 VO, ‘13, 1,573 hrs...................................... $55,000 Hamm HD+140VV, ‘13, 947 hrs.......................................... $82,500 Volvo DD15, ‘14, 631 hrs.................................................... $23,000

EXCAVATORS

PAVING

Case CX135SR, ‘11, 2,350 hrs............................................ $88,000 Cat 330CL, ’02, 12,032 hrs.................................................. $59,500 Cat M318, ‘96, 6,440 hrs.................................................... $39,500 Deere 200C LC, ’04, 8,988 hrs............................................ $60,000 Deere 350DLC, ’07, 5,837 hrs............................................ $83,000 Komatsu PC138USLC-10, ’14, 2,902 hrs............................ $95,000 Komatsu PC200LC-8, ‘08, 9,855 hrs....................................$69,000 Komatsu PC210LC-10, ’13, 2,036 hrs................................$125,000 Komatsu PC210LC-10, ’14, 1,876 hrs................................$178,000 Komatsu PC210LC-10, ‘14, 2,714 hrs................................$129,500 Komatsu PC220LC-8, ’06, 9,204 hrs....................................$83,000 Komatsu PC220LC-8, ‘07, 7,739 hrs....................................$79,000 Komatsu PC228USLC-8, ’12, 3,449 hrs............................ $155,000 Komatsu PC228USLC-10, ’14, 923 hrs.............................. $186,599 Komatsu PC300LC-7, ’02, 6,764 hrs....................................$90,000 Komatsu PC300LC-7, ’05, 9,765hrs.................................... $79,000 Komatsu PC300LC-7 w/Shear, ‘06, 7,463 hrs.................. $214,500 Komatsu PC300LC-8, ‘09, 9,584 hrs..................................$119,000 Komatsu PC360LC-10, ’15, 1,195 hrs................................$216,000 Komatsu PC360LC-10, ’15, 2,667 hrs................................$209,000 Komatsu PC360LC-10, ’13, 2,617 hrs................................$139,000 Komatsu PC360LC-10, ’12, 1,148 hrs................................$264,500 Komatsu PC400LC-7, ’06, 10,544 hrs..................................$70,000 Komatsu PC400LC-7EO, ’07, 10,949 hrs............................ $84,000 Komatsu PC490LC-10, ‘12, 3,273 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 4,306 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 5,371 hrs................................$239,000 Komatsu PC600LC-7, ’05, 10,900 hrs................................$109,000 Komatsu PC600LC-8, ’06, 10,509 hrs................................$147,500 Link Belt 250X3 LF, ‘12, 5,030 hrs...................................... $99,000 Volvo EC380DL, ‘11, 4,017 hrs.......................................... $132,500

Leeboy 8500, ‘03, 3,521 hrs................................................ $25,000 Vogele 5203-2, ’08, 4,307 hrs............................................ $99,000 Vogele 880WB, ’05, 5,862 hrs............................................ $26,699 Vogele Vision 5100-2, ‘13, 3,930 hrs................................ $119,500

FORESTRY Hydro-Ax 411 EX, ’98, 7,547 hrs..........................................$35,000 Komatsu 911.4, ’11, 6,132 hrs....................................................Call Komatsu 911.4, ’10, 5,225 hrs....................................................Call Komatsu 911.5, ‘13, 6,160 hrs....................................................Call Komatsu 931.1, ‘14, 4,000 hrs.......................................... $425,000 Komatsu XT430-2, ‘14, 6,365 hrs...................................... $265,000 Ponsse Ergo Harvester, ‘05, 13,239 hrs.................................... Call Ponsse HS10 Cobra, ’99, 20,995 hrs.................................. $64,900 Ponsse Buffalo, ’02, 22,200 hrs........................................ $119,000 Ponsse Ergo HS15, ’99, 17,676 hrs.................................... $79,900 Valmet 860.1, ‘08, 12,467 hrs.......................................... $149,900 Valmet 911.1, ‘02, 22,196 hrs.................................................... Call Valmet 941.1, ‘08, 11,309 hrs.......................................... $225,000

MATERIAL HANDLERS Cat 365CL-MH, ‘08, 10,428 hrs........................................ $137,500 Komatsu P400LC-8MH, ’08, 6,095 hrs.............................. $219,500

WATER TRUCKS Komatsu HM300-2 6,500 Gal, ’12, 7,764 hrs....................$255,000

Komatsu PC300LC-7, ‘05, 9,765 hrs...... $79,000

COMPACTION

WHEEL LOADERS Komatsu WA200PZ-6, ‘14, 957 hrs....................................$115,000 Komatsu WA270-7, ‘14, 2,175 hrs.................................... $109,000 Komatsu WA380-6, ’11, 2,888 hrs.................................... $150,000 Komatsu WA400-5L, ’05, 10,968 hrs.................................. $72,999 Komatsu WA430-6, ‘11, 4,377 hrs.................................... $167,500 Komatsu WA500-6, ‘09, 9,849 hrs.................................... $156,500 Komatsu WA500-6, ’09, 19,098 hrs.................................. $125,000 Komatsu WA500-6, ’09, 8,622 hrs.................................... $159,500 Volvo L70F, ‘08, 16,722 hrs................................................ $49,000

Komatsu WA200PZ-6, ‘14, 957 hrs...... $115,000

Financing Available for Qualified Buyers

16 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

V I S I T

R O L A N D M A C H I N E R Y . C O M

Page 6 â€˘ May 6, 2017 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke â€˘ (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ÂŽ

View our complete Used & â€œLike Newâ€? inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2012 Case CX350C, s/n 2012 Case CX210C, s/n DAC210K6NCSAH1134, 2012 Case DV202, s/n DDDDV202NCTF2016, DAC350K6NCSAP1212, 2650 Hours, Cab w/AC, 2260 Hours, Cab w/AC, 9â€™8â€? Arm, 32â€? Shoes, 1175 Hrs, ROPS, Right Side Drive Lever, 47â€? 10â€™8â€? Arm, 32â€? Shoes, Single Acting Hyds, Double Acting Hyds, Coupler..............$119,000 Drum.................................................... $24,900 Coupler, Warranty through 07/17...... $189,750

2011 Case CX130B, s/n DAC130K5NBSAD1555, 4100 Hours, Cab w/Armor for Window, 23â€? Steel Shoes,9â€™11â€? Arm, Hdys, Pattern Valve, Coupler, 24â€? Bucket.............................. $52,500

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 1999 Case 580L, s/n JJG0247133, 5550 Hours, Cab w/Heat, Two Lever, Ext-Hoe, 4WD, 18 inch Backhoe Bkt, 82 inch front Bkt............ ............................................................ $23,500

2006 Case 580SM, s/n N6C412119, 4600 Hours, Cab w/ Heat and AC, 4 WD, Ext-hoe, Ride Control, Two Lever, 82â€? Bucket, 12â€? and 24â€? Bkt..................................................$39,550

2012 Case SV250, s/n JAFSV250JBM435496, 155 Hours, Cab w/Ac, Two speed, Hyd Coupler, 78 inch Bucket......................................$40,000

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2011 Takeuchi TL250, s/n 225001218, 3675 Hours, Cab w/Ac, Case Controls, 80 inch Tooth Bucket.................................................. $37,500

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Indiana Schererville* 219-865-6545 *Case authorized dealer location

Custom Made Products Co. Humboldt, IA Lease To Own

(800) 760-7871 Call Anytime

www.gncmp.com 100+ Scrapers on Hand at 16 Locations FOR SALE OR FOR RENT

Locations: Humboldt, Bayard, De Soto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton, IA, Wayne, NE & La Plata, MO

We W ill Not Be Undersold!

livery! Free De st areas *to mo

18 yd Ashland I-180 TS2s (Used) Call ,07 /XEH 7UXFN Âś HQ FORVHG ERG\ K\GUDXOLF GUL YHQ DLU FRPSUHVVRU SQHX PDWLF SXPSV SRO\HWK\OHQ H WDQN Q N XQGHUERG\ X Q G HU E R G \ WRRO W R R O ER[ E R [ HV HV ODUJH O DU J H VDOYDJH V DO Y DJ H SXPS &KDVVLV 6WHUUOLQJ $FWHUUD 0 Z KS &$7 (QJ (DWRQ )XOOHU -V VSHHG PDQXDO WUDQV *9:5 DQG DSSUR[ PLOHV ,' +

5HDG\ WR JRÂŤ ÂŤ &DOO )RU 0RUH ,Q QIRUPDWLRQ

GRADERS

HOLCOMB

Artâ€™s-Way Graders, (New & Used)................................................ Call Johnson Graders (New & Used)....................................................Call 8â€™-16â€™ With & Without Rear Steer

8 yd to 18 yd, (Dolly Wheel or Direct Mount - New & Used)........ Call

ASHLAND

:K,E Z ĎŻĎŻĎŽĎŹ ĆľĆ&#x;ĹŻĹ?ĆšÇ‡ ĆšĆŒÄ‚Ä?ĆšĹ˝ĆŒ Ç ÍŹ ĎŻĎŽÍ˜Ď´ĹšĆ‰ ÄžĹśĹ?Í• Ä¨Ĺ˝ĹŻÄšĹ?ĹśĹ? ZKW^Í• Ä‚ ĎŻ-Ć‰Ćš ĹŻĹ?ĹŒ Ä?Ä‚Ć‰Ä‚Ä?Ĺ?ĆšÇ‡ Ĺ˝Ä¨ ĎŽÍ•ĎŽĎŹĎŹ ĹŻÄ?Í˜Í• ĎŻĎŹĎŹ y ĹŻĹ˝Ä‚ÄšÄžĆŒ Ä‚Ć?Ć?ÄžĹľÄ?ĹŻÇ‡Í• Ä?ĆľÄ?ĹŹÄžĆšÍ• Ä‚ĹśÄš Ć?ĹśĹ˝Ç Ä?ĹŻĹ˝Ç ÄžĆŒÍ˜ ĎĎŻĎŹĹšĆŒĆ?Í• ÎˇĎľĎĎŹĎŹĎ°ĎŻÍ™ Î¨ĎŽĎ°Í•ĎŹĎŹĎŹ

d < h ,/ d ĎŽĎŻĎą ĎłÍ•ĎľĎąĎŹÎˇ Ç†Ä?Ä‚Ç€Ä‚ĆšĹ˝ĆŒ Ç ÍŹ Ä‚Ä?Í• ,ÄžÄ‚ĆšÍ• ÍŹ Í• ĆľÇ† ,Ç‡ÄšÍ• ĹśĹ?ĹŻÄž ĹŻÄ‚ÄšÄžÍ• dĹšĆľĹľÄ?Í• YĆľĹ?Ä?ĹŹ Ĺ˝ĆľĆ‰ĹŻÄžĆŒÍ• ĎĎĎŹĎŹĹšĆŒĆ?Í˜ ÎˇĎąĎŹĎŽĎĎľĎÍ™ Î¨Ď°ĎÍ•ĎąĎŹĎŹ

Dh^d E' ĎŽĎŹĎłĎ˛ ^ĹŹĹ?Äš >Ĺ˝Ä‚ÄšÄžĆŒ Ç ÍŹ Ď´Ď°ĹšĆ‰Í• ĎŽÍ•ĎąĎŹĎŹÎˇ Ä‚Ć‰Ä‚Ä?Ĺ?ĆšÇ‡Í• Ä‚Ä?Í• ,ÄžÄ‚ĆšÍ• :Ĺ˝Ç‡Ć?Ć&#x;Ä?ĹŹ Ĺ˝ĹśĆšĆŒĹ˝ĹŻĆ?Í• ĎŽ ^Ć‰ÄžÄžÄšÍ• WĹ˝Ç ÄžĆŒdÄ‚Ä?ĹšÍ• Ĺ˝ĆľĹśĆšÄžĆŒÇ ÄžĹ?Ĺ?ĹšĆšÍ• ĹŻĹ˝Ä?ĹŹ ,ÄžÄ‚ĆšÄžĆŒÍ• Ä‚ĹśÄš ZÄ‚ÄšĹ?Ĺ˝Í˜ ĎąĎ˛ĎŹĹšĆŒĆ?Í˜ ÎˇĎŹĎŹĎ˛Ď´ĎŻĎŻÍ™ Î¨ĎŽĎľÍ•ĎľĎľĎą

- - _ 'HV 0RLQHV Ä &HGDU 5DSLGV Ä :DWHUORR Ä $PHV _ ZZZ VWDUHTXLS FRP

14 yd Ashland I-140 XL2s (New & Used) Call

18yd Ashland I-180 TS2s, (Used)................................................ Call 17 1/2yd Ashland I-175 XL2, (New & Used)................................ Call 15 1/2yd Ashland I-155 TS2s, (New & Used).............................. Call 15 1/2yd Ashland I-155 XL2s, (New & Used).............................. Call 13yd Ashland I-130 TS2s, (Used)................................................ Call Ashland I-130 XL2, (Used)............................................................Call Ashland I-140 TS2, (New)............................................................ Call 14yd Ashland I-140 XL2s, (New & Used).................................... Call 9 1/2yd Ashland I-950s, (New & Used)........................................ Call Ashland Groundhog GH2500, (New & Used)................................ Call

GARFIELD 12yd Garfield Model 1150s, (Used)..............................................Call 13yd Garfield 1350s, (New & Used)............................................ Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

BIG DOG 8 yd Big Dogs, (New & Used)...................................................... Call 6 1/2 yd Big Dogs, (New & Used)................................................ Call 5 yd Big Dogs, (New & Used)...................................................... Call 12â€™ Feedlot Box Scrapers..............................................................Call 10â€™ Feedlot Box Scrapers..............................................................Call 12â€™ Box Scrapers.......................................................................... Call 10â€™ Box Scrapers.......................................................................... Call 8â€™ Box Scrapers............................................................................ Call

IRONWOLF 8-14 yd.......................................................................................... Call

LEON 10-13 1/2 yd.................................................................................. Call

ROWSE 7 yd Rowse Model 7002 & 7004.................................................. Call 5 yd Rowse Model 7002 & 7004.................................................. Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used)............................ Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 7

PAVERS / ROAD WIDENERS BOMAG CR352 - ‘’17, rubber tired hwy class paver, conveyor feed, full sonic grade & slope controls, oscilatory push rollers, Carlson EZ IV Screed, 8’-15’6”, # C1140.......................... P.O.R. BOMAG CR662RM - ‘15, 230 Hrs, Material Transfer w/Hopper, #C000763.................... $435,950 GOMACO GHP2800 - ‘99, 1975 Hrs, 4 track paver w/26’ 5000 series ASO pan, w/4’ TA section center bar shooter, autofloat.......................................................................................... $185,000 GOMACO PS2600 - ‘99, 2690 Hrs, 60” belt placer w/26’ of pan & standard equipment $115,000 GOMACO TC600 - ‘99, 1609 Hrs, texture cure machine for 26’ paving, standard equipment........ ..........................................................................................................................................$46,750 LEEBOY 8500 HD - ‘00, 2915 Hrs, Hatz 3 Cylinder, Diesel Engine w/8-15’ Legend Propane Screed Electronic Grade Controls, Ready to Work, #C000969..........................................$31,000 MAULDIN 690G - ‘16, 8’-13’ Wide (Gold Key Specs), #C001058, 50 Hrs........................ $69,950 MIDLAND SPR6 - ‘15, 200 Hrs, Right Hand Discharge, 1-6ft, # C000914...................... $101,950 MIDLAND SPD8 - ‘16, 92 Hrs, Dual Discharge to 8 ft, #C001018.................................. $165,950 MIDLAND SPD10 - ‘03, 3682 Hrs, Dual Discharge, Deere Powered, ***3-1ft Ext, 4-2ft Ext, Hyd Ext, #C000926.......................................................................................................... $69,950 P.O.R. items may be on rent causing pricing and hours to vary.

Sandvik/Argo CH 440E Closed Circuit Cone Plant – (’15), JCI 6 x 20 TD Screen, Sandvik 440 Cone, Quad Axle Chassis...P.O.R.

Extec S5 Mobile Screen Plant – (’08), Double Screen Box, Track Mounted, Tri-Axle Bogie for Transport…$95,000

Manitowoc 14000 - (‘07) 220 Ton Crawler Crane, 292’ Boom, 70’ Jib, 48” Shoes, SelfErecting System, Series 2 CWT…P.O.R.

Grove TMS900E - (’05) 90 Ton, 142’ Boom, 56’ Jib, Aux, Hoist, Boom Dolly…$365,000

MILLING MACHINES BOMAG BM600 - ‘16, 83 Hrs, 24” Drum, Load Out Conveyor...................................... $216,950 BOMAG BM1200/35 - ’15, 450 Hrs w/Tracks, 3ft and 4ft Drum, Front Conveyor, #C000846........ ........................................................................................................................................$369,950 BOMAG BM1300/30 - ‘16, 308 Hrs, 51”, 4 Track Milling Machine, #C000993.............. $324,950 CATERPILLAR 950G - ‘03, Transfer Station Machines, Solid Tires.. 2 From $31,950 and $39,950

CRUSHING AND SCREENING KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’................................................................ $115,950 NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More...................... P.O.R.

ROLLERS HYPAC C766C - ’07, 4879 hrs, 66” Double Drum Vibratory Roller, #C001150................$19,500 HYPAC C766C - ’07, 5756 hrs, 66” Double Drum Vibratory Roller, #C001131................$17,500 SAKAI R2H2 - ’16, 84”, 3 Wheel Static, #C001040, 179 Hrs.......................................... *$93,750 SAKAI R2H4 - ‘16, 84”, 3 Wheel Static, remaining warranty and eptw.............. *CALL FOR PRICE SAKAI SW652 - ‘15, 386 Hrs, 58” Double Drum, Vibratory Rollers, #C000744..............*$70,468 SAKAI SW502 - ‘13, 964 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212 ........................................................................................................................................*$27,950 SAKAI SW300 - ‘13, 149 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156............ ........................................................................................................................................*$29,950 SAKAI SW320 - ‘16, 47” Double Drum Vibratory Roller, #C000963, 91 Hrs.................. *$39,950 SAKAI SW770HF - ‘16, 67” Double Drum Vibratory Roller w/Exact Compaction Meter, #C000966, 472 Hrs........................................................................................................ *$92,950 SAKAI SW880 - ‘15, 79” Double Drum Vibratory Roller w/Exact Compaction Meter, #C000729, 1209 Hrs........................................................................................................................ *$85,505 SAKAI SW880 - ‘16, 79” Double Drum Vibratory Roller, #C000968, 478 Hrs.............. *$119,950 SAKAI GW750-2 - ‘14, 535 Hrs, Vibratory Pnuematic Tire Roller, #C000533................ *$99,950 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282.................... $25,000

Contact Tim or Marty in Illinois

1-800-307-0221

treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT BOLIDEN ALLIS 500, (‘92) Portable Hydracone, Cummins Pwr, 4 Jacks..................................................$95,000 JCI K-400 PORTABLE CONE CRUSHER, (‘06) 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. Leveling Jacks, Tri-Axle Running Gear.................................................................................................. $345,000 JCI 6X20TD PORTABLE SCREEN PLANT, (‘12) Underscreen Discharge Conveyor, Two (2) Cross Conveyors, Electric Control Panel............................................................................................................................ $162,000

RT Forklifts PETTIBONE 8044, (‘01) 8,000# Capacity, 44’ Lift Height, Enclosed Cab................................................ $28,500

CRANES AMERICAN 5300, (’88), 60 Ton, 140’ Boom, 40’ Jib, 3rd Drum w/CLL.............................................. $139,500 GROVE RT880E, (’08), 80 Ton, 128’ Boom, 56’ Jib, Aux. Winch.......................................................... $325,000 GROVE RT528C, (’98), 28 Ton, 70’ Boom, 25’ Jib.................................................................................. $81,500 MANITOWOC 12000-1, (‘13) 100 Ton, 190’ Boom, 60’ Jib, 75 Ton Block................................................ P.O.R. MANITOWOC 12000, (‘07) 100 Ton, 200’ Boom, 60’ Jib, 3rd Drum.................................................... $495,000

LOADERS AND EXCAVATORS: LIEBHERR LR622B LITRONIC CRAWLER LOADER, (‘08) 132 HP, Hydrostatic Drive, 20” Pads, 2.35 yd bkt, ROPS Cab with AC................................................................................................................................ $155,000 LIEBHERR L550 2+2, (‘11) 4.2 yd bkt, 23.5R25’s, 177 HP........................................................................P.O.R. LIEBHERR R974B, (’07) 186,000# , 51’ Reach, 35’ Dig Depth, 39.5” Pads.............................................. P.O.R. CAT 930G, (‘07) 3 Yd Bucket, 60” Forks, Hyd QC, 20.5R25 Tires.......................................................... $99,500

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Park Allison at:

pallison@amstate.com or mobile 1-414-335-1074 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees OFF ROAD HAULERS

COMPACTORS

CRANES

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . . $15,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, off work), work ready . . . . . . . . . . . . . . . . . . $127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom Hydrostatic trans 84" smooth drum, drum drive . . . . . Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . . $49,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $52,500 working everyday . . . . . . . . . . . . . . . . . . . . . $145,000 IR SD105DX, 2002, 84" drum drive, OROPS, very clean Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,

AIR COMPRESSORS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $74,500 A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . CALL IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS IR SD150F, 84" Padfoot, 1998, OROPS . . . . . $49,500 P/S trans, tailgate, work ready . . . . . . . . . . . $115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a towIR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . . From $5,200 ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62,500 approx 7,000 hrs, good condition . . . . . . . . $147,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $68,000 P/S trans, working everyday on jobsites . . . . $87,500

BACKHOES

Case 580L Rubber Tire Loader Backhoe, 1997, Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . $24,500 nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $205,000 P/S trans, 26 cy, working everyday on jobsites . . . . . . (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89,000 DRILLS work ready . . . . . . . . . . . . . . . . . . . . . . From $79,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Rammax Walk Behind Rollers, over 25 in stock, lever 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . Duraquip dust collection . . . . . . . . . . . . . . . .$125,000 & remote . . . . . . . . . . . . . . . . . . . . $4,000 to $10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $122,500 MISCELLANEOUS

(8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

CRAWLER TRACTORS

(2) Balderson Broom Attachment for Cat IT Machines, (2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, 8' wide, good condition . . . . . . . . . . . . . . . $4,000 Ea. HYDRAULIC EXCAVATORS winches, v. good . . . . . . . . . . . . . . . . . . $175,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou- (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 pler, 6-7000 hrs, Fleet maintained . . . . . . . . . $29,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39,000 Ea. ATTACHMENTS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39,500

MOTOR SCRAPERS

Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Cat 613C Water Wagon, 1994, 5000 gal drop tank, Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43,500 ROPS, spray heads . . . . . . . . . . . . . . . . . . . . . $49,500 (5)

Komatsu

PC128UU,

1996,

offset

boom, Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good

rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . . CALL condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice coupler, plumbed, 8’6” width, nice, work ready . .CALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CALL Volvo EC460B LC, 2003, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing good con-

TRUCKS & TRAILERS

dition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$100,000 (2) 48' Box Vans w/Liftgates, Good Condition . . CALL

BUCKETS Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,000 Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TOU O GH EQUIPMENT.

GET THE BEST COMPACT EQUIPMENT – BOBCAT® EQUIPMENT – FOR AN EASY, LOW MONTHLY Y PAYMENT. LITTLE OR NO DOWN PA AYMENT NECESSARY

EASSY LEASE E

PREDICTABLE MONTHLY EXPE P NSE

NO TRADE-IN HASSLES

T59 5 A S L OW A S

A S L OW A S

4 9 49

U SD* P ER MO N T H 36-MONTH LEASE

with 3-year/3,0 0 0 -hour Protection Plus® full warrant y

O 0 % A PR OR forr 4 8 months*

OR in lieu of financing, rebates up to $ 2,100 USD*

PLUS additional rebates up to $700 USD D on new Bobcat E35i compact excavators PLUS LUS 3-yearr//3,000-hour driveline warranty

S595 A S L OW A S

649 4

U SD* P ER MO N T H 36-MONTH LEASE

with 3-year/3, / 0 0 0 -houur Protection Plus full warrant y

OR 0 % A PR for 4 8 months*

MAXIMIZE UPTIME

OR in lieu of financing, rebaattes up to $ 2,300 USD*

additional al rebates up to $700 USD o n n ew B o b c a t T 5 9 5 c o m p a c t t r a c k l o a d e r s PLUS 3-yearr//3,000-hour driveline warranty

539

U SD* P ER MO N T H 36-MONTH LEASE

with 3-year/3, / 0 0 0 -hour Protection Plus full warrant y

OR 0 % A PR for 4 8 months*

OR in lieu of financing, rebaattes up to $1,700 USD*

o n n ew B o b c a t S 5 9 5 s k i d - s t e e r l o a d e r s PLUS 3-yearr//3,000-hour driveline warranty

P PLUS 0% APR for uup to 36 months* onn thhhe purchase of seelect Bobcat attachm ments. Authorized B obcat Dealer s

FFARM-RITE ARM-RITE ARM RITE EQUIPMENTT,, INC.

FFARM-RITE ARM-RITE ARM RITE EQUIPMENT MENT OF WILLMAR

FARM FARM-RITE ARM-RITE RITE EQUIPMENTT OF STT.. CLOUD

901 Parker AAvve. W., Dassel, MN 55325

1515 W. Litchfield AAvve., Willmar, MN 56201

810 Mayhew Lake Road NE, St. Cloud, MN 56304

320-275-2737

320-235-3672

320-240-2085

www.farmriiteequip.com Visit Bobcatt.com/Lease17 or stop by our dealership today for f details. *Of fer expires 6/30/17. Available at par ticipating and eligible dealers only. Of fer may var y by product t ype, series, model and select units in dealer inventor y. At tachments shown not included. Of fers available on new equipment in US only. Some restrictions apply. Length of contract may var y. Prior purchases not eligible. See dealer for details. Financing provided on approval of credit by authorized Bobcat finance providers to well-qualified buyers. Administrative fees may apply. Of fer not available to government accounts, national accounts and municipal /utilit y bid customers. Non-commercial customers may not be eligible for low rate financing. Bobcat Company reser ves the right to ex tend or discontinue any of these programs at any time without prior notice. Bobcat® and the Bobcat logo are trademarks of Bobcat Company. | 17-B149

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

incredible fuel efficiency outstanding power & productivity Volvo is with you. Optimum power, versatility and fuel efficiency comes with the name you’ve trusted for over 80 years. With unwavering reliability and dependability, Volvo ensures you get the job done day after day.

www.ascendum.com ascvolvo.com

Smart Works.

Page 12 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews Complete Most Challenging Piece of Three-Year Project By Dick Rohland CEG CORRESPONDENT

Road crews recently capped off the third and most challenging piece of a three year project to raise 3 mi. (4.8 km) of road surface of a southwestern Minnesota highway above the 100 year flood mark to thwart habitual flooding by the Minnesota River. Located 80 mi. (130 km) southwest of the Twin Cities of St. Paul and Minneapolis, Minnesota Department of Transportation (MnDOT) TH 169 was raised 4.5 ft. (1.4 m) to nearly 6 ft. (1.8 m) higher through several sections of the road to combat high waters. Complementing the raised pavement, 9 mi. (14.5 km) of this stretch of highway has new concrete end to end, improved drainage and all new signs. All the removals were put back into the job and many of the trees cut down were ground up and used to stabilize the job. Along the entire length of the road work, safety was beefed up by adding a combination concrete barrier and high tensile guardrail through this narrow stretch of highway to prevent head-on crashes; of which there were 38 in the past ten years. Mathiowetz Construction based in Sleepy Eye, Minn., completed the work 30 days ahead of schedule. It was an injury free project despite battling a wet summer, complex construction phasing and working in some very narrow space between the bluffs of the Minnesota River Valley and the river. With the advanced completion date, the company earned the contract incentive to have traffic rolling on all four lanes by late September last year and an Outstanding Performance Award from (MnDOT). To bring the project to an end, road crews closed this busy stretch of highway for five months. Carrying an ADT of nearly 18,000, the highway is a popular connection between the cities of Mankato and St. Peter that have a combined population of 51,800. It serves as a key commerce and agricultural route between the Twin Cities and south central Minnesota. The road closure forced thou-

sands of vehicles to be routed to a more rural, quiet two-lane highway. Safe traffic control and access for the residents of two dozen homes located directly inside the construction zone combined with a very thorough communications plan were key goals that had to be met. Once traffic was detoured, truckers rolled in and dumped tons of fill to raise the low lying sections of road above the high water mark of the flood volatile planes of the river valley. At $30 million, Mathiowetz Construction took on the largest of Road crews recently capped off the third and most challenging piece of a three-year project to raise 3 mi. (4.8 km) of road surface of a southwestern Minnesota highway above the 100-year flood mark to thwart habitual flooding by the Minnesota River.

Located 80 mi. (130 km) southwest of the Twin Cities of St. Paul and Minneapolis, Mi.nnesota Department of Transportation (MnDOT) TH 169 was raised 4.5 ft. (1.4 m) to nearly 6 ft. (1.8 m) higher through several sections of the road to combat high waters.

three contracts (MnDOT) awarded to resurface TH 169 and raise the pavement through a 20 mi. (32 km) stretch of the highway. Martin Mathiowetz founded the company in 1924. It grew from simple beginnings providing maintenance services to the local agricultural community, to a 160 employee company with more than 300 pieces of heavy equipment. Now working statewide, the company specializes in grading, site expansions and construction of roads, box stores, airports, ethanol plants, grain terminals and water retention plants. MnDOT project manager Peter Harff, P.E. said last season’s work was a huge project for the time allotted where success pivoted on the known and unknown. As he explained, “it depended on either

being real lucky with the weather which we decidedly were not or on a smart, innovative approach to construction staging which is what we had!” Mathiowetz project manager Randy Huiras and Harff agree that teamwork between the construction crews and MnDOT staff was a major force to delivering this project ahead of schedule despite its under lying complexities. “MnDOT and Mathiowetz used partnering on this job and that went well. That’s what hit the homerun on the job,” Huiras remarked. “They were moving people and equipment around continuously. They moved the concrete paver around a lot just in response to what they could get done,” Harff said. “We were concerned that if work wasn’t coordinated well, people were going to be complete-

ly landlocked. It was a true partnership and our construction staff is to be applauded for helping build that relationship with Mathiowetz.” With safety a priority, Mathiowetz crews and sub-contractors worked long hours to keep the momentum moving forward to stay ahead of schedule and keep the crews and traveling public safe. Combined with dozens of pieces of equipment on site, “on average there was anywhere from 75 to 100 people on the job working sunrise to sunset. It was a zero injury job, no accidents. It was a safe project which is another milestone that work crews met,” Huiras said. “This was honestly what we prayed for,” said Harff. “When you divert that much traffic to a rural area, you know there are risks and we knew if we tried to build under traffic conditions, the risks were going to be significantly higher. “The fact that the traffic went smoothly from day one, that we didn’t have any crashes, that the contractor was able to get this done despite terrible weather and just the general support from the public responding to the traffic issues without too many complaints; it went better than we had hoped for.” According to MnDOT documents, since the highway was first

constructed in the 1960s, periodic flooding has always been a problem. When the river begins creeping up to the highway surface, (MnDOT) crews are forced to shut the highway down; causing inconvenient detours for anyone on wheels. Flooding on this part of the highway has become more vexing to MnDOT officials. Over the last 21 years, eight of the twelve most extreme floods have closed the highway; with four closures occurring just over the last five years. The three-year project to raise the highway and replace deteriorating pavement began in 2014 and was broken out into three separate contracts. The first two years of construction covered approximately 10 mi. (16 km) of flood mitigation and road improvement work between the cities of La Sueur and St. Peter. Unlike last year’s construction, traffic kept rolling on TH 169 through the first two years of work because only two lanes of road surface were raised. Last season’s work required raising all four lanes of the highway because of very little separation between opposing lanes and tight space between the bluffs and the river. Working under traffic conditions was not an option, Harff said, because construction space was narrow and would have increased the risk of accidents and extended the construction into another season. To meet a major environmental deadline, Mathiowetz crews hit the site last February to complete the clearing and grubbing work before April to avoid disturbing the spring roosting season of the Northern Long Eared Bat, which is a federally endangered species. Working under traffic conditions and in very limited right-ofway, equipment and crews removed hundreds of trees to make room for the additional fill required to raise and widen the road. Going into March, as the clearing and grubbing work continued, a second team of Mathiowetz crews moved in early to begin removing pavement. Taking advantage of the mild weather, “we chose to start early at see MNDOT page 14

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 13

> ÊÕ

> ÕÃ ÃÊÌ `>Þ `> >Þ ÞttÊ ÀÀÞ Þ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

www ww w.R .RBused.com

Celeb brating tiing g our 30th Yea Year!!

2000 KOMATSU PC30MR-1, #5969, CAB/HEAT | BLADE | ROADLINERS | AUX HYD'S | 1,200 HRS ................................................................ $29,500

2008 KOMATSU PC78MR-6, #81717, CAB/AC | ROADLINERS | 8' ARM | HYD THUMB | 2,700 HRS..........................................................$79,500

2014 KOMATSU PC88MR-10, #92381, CAB/AC | 11'2" BOOM | 7' ARM | 18" SHOES | AUX HYD'S | QC| 2,100 HRS........................................ $89,500

2004 KOMATSU PC200 LC-7, #81536, CAB/AC | 31.5" SHOES | 9'7" ARM | HYD THUMB | 5,600 HRS........................................................$126,500

2006 KOMATSU PC220 LC-7, #92023, CAB/AC | 31.5" TRACKS | MECH THUMB | 6,300 HRS........ ................................................................ $79,500

2011 KOMATSU PC308US LC-3E0, #82416, CAB/AC | QC | 33.5" TRACKS | AUX HYD'S KOMTRAX | 4,400 HRS............ CALL FOR PRICE

2012 KOMATSU PC360 LC-10, #82876, CAB/AC | 33.5" TRACKS | 10' ARM | JRB QC | 5,000 HRS .................................................. CALL FOR PRICE

Page 14 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Construction Employment Up in 39 States Over Last Year Thirty-nine states added construction jobs between March 2016 and March 2017 while 17 states added construction jobs between February and March, according to an analysis by the Associated General Contractors of America of Labor Department data. Association officials noted that contractors in most states remain busy for now but worry about not being able to find enough workers to complete projects in the future. “Construction job gains were much less widespread in March after unseasonably mild weather boosted hiring in more states than usual in February,” said Ken Simonson, chief economist of the association. “Only Massachusetts and Texas set new records for construction employment in March, following a month in which construction employment reached all-time highs in five states.” California added the most construction jobs (42,200 jobs, 5.5 percent) during the past year. Other states adding a high number of new construction jobs for the past 12 months include Florida (36,500 jobs, 7.9 percent); Texas (18,900 jobs, 2.7 percent); and Washington (12,200 jobs, 6.7 percent). Oregon added the highest percentage of new construction jobs during the past year (9.2 percent, 8,200 jobs), followed by Nevada (8.3 percent, 6,200 jobs), Rhode Island (8.2

“More high school students should know that construction offers above-average starting pay, steady work and good career advancement.” Stephen E. Sandherr AGC

percent, 1,500 jobs) and Florida. Ten states and the District of Columbia shed construction jobs between March 2016 and March 2017. Employment was unchanged in Montana. Illinois lost the highest number of construction jobs (minus 4,900 jobs, minus 2.2 percent), followed by Mississippi (minus 4,800 jobs, minus 10.4 percent) and Iowa (minus 2,000 jobs, minus 2.4 percent). Mississippi lost the highest percentage for the year, followed by D.C. (minus 9.3 percent, minus 1,500 jobs) and Alaska (minus 6.6 percent, minus 1,100 jobs). California added the most construction jobs between February and March (18,900 jobs, 2.4 percent). Other states adding a high

number of construction jobs include Georgia (4,700 jobs, 2.6 percent); Texas (4,000 jobs, 0.6 percent); Virginia (2,100 jobs, 1.1 percent) and Florida (1,900 jobs, 0.4 percent). New Mexico added the highest percentage of construction jobs during the past month (3.4 percent, 1,500 jobs), followed by Georgia; California; Maine (2.0 percent, 600 jobs) and Nevada. Construction employment declined in 30 states and D.C. during the past month and was unchanged in Montana, North Dakota and Wisconsin. Illinois shed more construction jobs than any other state (minus 7,100 jobs, minus 3.2 percent), followed by Louisiana (minus 6,700 jobs, minus 4.4 per-

cent); and Maryland (minus 4,500 jobs, minus 2.7 percent). Alaska lost the highest percentage of construction jobs between February and March (minus 4.9 percent, minus 800 jobs); followed by Louisiana and Missouri (minus 2.9 percent, minus 3,600 jobs). Association officials said that more contractors are quoting longer completion times or passing up opportunities to bid on new projects as ways of coping with shortages of available qualified workers. The association urged federal, state and local officials to act promptly on measures outlined in the association’s Workforce Development plan to open up more career and technical education opportunities, especially for high school students. “More high school students should know that construction offers above-average starting pay, steady work and good career advancement,” said Stephen E. Sandherr, the association’s chief executive officer. “Increasingly, workers get to use cuttingedge technology such as drones, virtual- or mixed-reality devices and GPS- or laserguided tools.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Crews Add Concrete Barriers, High Tensile Guardrail MNDOT from page 12

our own cost so we could complete the job on time. We started work on the inside lanes and kept traffic moving on the outside lanes,” Huiras said. In early April, more crews moved in to begin removing and replacing just over a dozen box culverts ranging in width and height from 8 ft. (2.4 m) by 4 ft. (1.2 m) to 20 ft. (6.1 m) by 12 ft. (3.7 m). They ranged in length from 35 ft. (10.7 m) to 150 ft. (45.7 m). “We went into some of the box culvert areas which are the flood prone areas in early April going into May in an attempt to get to them before the spring rains started,” Huiras said. However, the weather turned against the crews. Weeks later with a good start behind them, Mathiowetz crews moved into high gear. Rolling the dice that heavy spring rains would not drown the early start and with plenty of advance publicity behind them to

alert the public of the impending construction, Mathiowetz crews closed down all 9 mi. (14.5 km) of highway in late April and dug in. Once the highway was shut down, the contractor had 150 days to remove the detour and open the road to traffic. Wasting no time, a heavy duty roster of workers and equipment took over and began tearing into the road. Supporting upwards of 100 workers on any given day, dozens of pieces of heavy equipment roamed throughout the entire length of the construction site. Equipment on site included Cat 349 track excavators, a Cat 324 long reach excavator, Cat 160 M blades with machine control, Cat dozers with machine control, Cat scrapers and compactors, John Deere dozers and loaders, a Manitowoc MLC165 crawler crane and a Gomaco P52600 concrete paver. On the technology end of the job, a majority of the Cat equipment used GPS equipment. The concrete contractor, Concrete

Foundations Inc. based out of Hampton, Iowa, used string less paving for the road profile, “which is not real common in the state of Minnesota,” Huiras said. Some of the major quantities confirm the labor, equipment and recycling effort that went into completing this project. Removals included 25,600 cu. yds. (19,600 cu m) of muck, 178,800 sq. yds. (148,800 sq m) milled bituminous surface and 19,500 sq. yds. (16,300 sq m) of full depth reclamation. Construction quantities included 354,800 sq. yds. (296,700 sq m) of 8 in (20 cm) concrete, 40,600 cu. yds. (31,000 cu m) of aggregate base, 238,500 cu. yds. (199,400 sq m) of granular and common embankment and 40,000 cu. yds. (30,500 cu m) of select granular embankment super sand. It was a multi-faceted, non-linear project that called for complex scheduling. “We were taking the road apart in different areas and at the same time putting it back together! We

had 75 to 80 trucks hauling on that job on average for the first 60 days of construction. There were trucks either taking bituminous or concrete off the site or trucks bringing in gravel, trucks bringing in the recipe to make concrete or trucks hauling new concrete to the road. “When you figure concrete cure times of five to seven days, there was a lot of scheduling done the day before on routing drivers around. It took a lot of effort on everyone’s part to coordinate access in and out of the job,” Huiras said. Transcending all of the complex coordination, long hours and dust raising, work producing noise was a communications plan that worked and worked well both MnDOT and Mathiowetz staff said. Besides running a series of open houses throughout design and construction, Rebecca Arndt, MnDOT public information officer attributed much of the publicity success to three short and simple videos posted on the Facebook page.

Reaching over 100,000 people, the videos summarized in minutes the extent of work and recommended detour route. “This was a first for us and highly successful way of reaching metro drivers,” Arndt said. Backing up the social media, “the local media took a real interest in the project and ran news stories throughout construction.” Mathiowetz Construction issued access cards to the residents residing in the work zone and established a direct cell phone number to company staff if they had any problems getting in or out of the construction zone, said Huiras. From MnDOT’s perspective, it was a flawless project. “It was an excellent, excellent project. It looks good and functions well,” Harff said. “I get more high fives from people at the grocery store than any other project. It’s just been a joy.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 15

JD 700K XLT, 22” Pads, JD 310SJ, Air, 4x4, Ext Hoe, 4+1 Bkt, 1137 hrs, 120” PAT Blade, 621 hours, #102923............ #100873.......... $69,500 ...................... $149,000

JD 250D, 25 Ton Truck, JD 200DLC, 9’ 6” Arm, Bomag BW177D-40, #102879........ $159,000 32” Pads, #75568.......... Smooth Drum, 66” ........................ $99,000 Width, #98330.. $67,000

JD 344K, Cab, Air, Ride, CEC Screen, 6 x 16 Wheeled Screen, Coupler, 1153 hours, #103183..........$109,000 #91758.......... $259,000

JD 670D, Low Cab, Air, JD 85D, 6’ 11” Arm, 20” JD 524K, Hi Lift, QC, GP Bucket, #102318.... 14’ Blade, #98303........ Rubber Pads, #52686.. ...................... $119,500 ........................ $96,000 ........................ $85,000

JD 850K, WT, 30” Pads, NPK Hammers, All JD 200DLC, 50’ Super Sizes for All Makes. 140” Semi U Blade, Long Front, 32” Pads, #92031.......... $139,000 #102383........ $169,000 Inspected and Well Maintained, GH4-GH18

JD 544J, Cab Air, 3 JD 650K LGP, 28” Pads, Winch, Warranty, Spool, Ride, #101191.... #103181........ $129,000 ........................ $89,500

JD 245GLC, 9’ 11” Arm, JD 850K LGP, 30” Pads, JD 744H, Cab, Air, JD 624K, Cab, Air, 3 JD 650J, LGP, 28” 28” Pads, Mech Thumb, Ride, GP Bucket, 168” Blade, Winch, Spool, QC, #94935...... Pads, 128” PAT Blade, #95039............ $159,000 #103469.......... $159,000 #99959............ $79,000 ...................... $119,000 #91179..............$89,000

Page 16 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2015 Bobcat S595 - Call for Details

Bobcat Excavators in Stock, Call for Pricing

Bobcat Toolcats In Stock

Doosan DX140LC Excavator Available for Rent

Largest Selection in the Midwest! ®

Authorized Bobcat Dealer Bobcat 440.......................................... Starting at $4,500 Bobcat 463’s........................................ Starting at $8,000 Bobcat 542B........................................ Starting at $6,900 Bobcat 642........................................................ $7,500 Bobcat 642B...................................................... $8,500 Bobcat 743.......................................... Starting at $8,000 Bobcat 751................................ Several Starting at $9,900 Bobcat 753........................................ Starting at $10,000 Bobcat 763F, Series, Open Cab.............................. $11,500 Bobcat 773G, With Heat...................................... $15,900 Bobcat 843, Heated Cab...................................... $10,000

Bobcat 853’s...................................... Starting at $11,000 Bobcat 863, With Heat........................................ $12,900 Bobcat 863G...................................................... 14,900 Bobcat 873...................................................... $17,900 Bobcat S130, 2006, Heated Cab................................ CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ...................................................... Starting at $14,900 Bobcat S250...................................... Starting at $17,500

Compact Track Machines Bobcat T190’s.................................... Starting at $17,500 Bobcat T200...................................... Starting at $17,500 Bobcat T250, Gold................................ Starting at $24,500 Bobcat T300...................................... Starting at $25,000

2015 Bobcat T770 - Call for Details

Other Brands Gehl 4615 Skidloader, Open Canopy.......................... $8,500 Mustang 2105...................................................... CALL New Holland L175................................................ CALL John Deere 250/260 Models Available........................ CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys.................... ...................................................... Starting at $15,900 Bobcat 334.......................................................... CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341........................................ Starting at $29,990 Bobcat 442.............................. Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Authorized Bobcat Dealer

U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ May 6, 2017 â€¢ Page 17

I NAVAILABLE STOCK! NOW Visit our web site at EagerBeaverTrailers.com

and you're a "click" away from getting all the information you need from our nearest dealer.

PAYMENTS AVAILABLE AS LOW AS:

20 XPT

s #!0!#)49 LBS

$ * * per month (60 months)

20 XPT / Hydraulic Ramps $ s #!0!#)49 LBS

* per month (60 months)

25 XPL / Lift Front Axle $ s #!0!#)49 LBS

* per month (60 months)

* 0AYMENT DOES NOT INCLUDE &REIGHT AND 4AXES

ANNIVERSARY

1946-2016 For a quote on any model, please call 800-257-8163

>> EagerBeaverTrailers.com

Page 18 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Future of the Coal Industry Relies on Several Factors By Giles Lambertson CEG CORRESPONDENT

Robert Murray said President Donald Trump’s roll-back of coal industry regulations will bring back thousands of coal jobs. While he could be right, his view is not exactly unbiased. Murray is CEO of Murray Energy, which is billed as the largest coal mining company in the United States, employing 6,000 people and mining 65 million tons of the energy commodity each year. Yes, with fewer regulations, coal might regain its footing as a viable domestic energy source and a reliable employer of tens of thousands of people. It might do so with minimal damage to America’s air and water resources. But the situation is not as simple as that. The coal industry is unlikely to reclaim its ascendant role in energy production nor recover all the jobs lost in recent years. Several determining factors will tell how much bounce actually occurs. Regulations and Rules — Some History The real argument about regulating coal production is about the role of regulations. Strict regulation of American coal mining is argued as necessary for the safety of coalminers and of the environment. There is little dispute about that. However, opponents of the industry’s regulations argue that some rules are not protective — they are, in fact, punitive and designed to destroy the industry. Rules and regulations imposed since the recession have been both. A prime example is the Interior Department Stream Protection Rule announced just last December, a month before the Obama administration turned over its rule-making authority. The rules required coal companies to “avoid mining practices that permanently pollute streams, destroy drinking water sources, increase flood risk and threaten forests.” Companies were told to monitor any stream that could be affected by a mine “before, during and after operations.” The administration called it a “modern and balanced approach” to protecting streams. West Virginia Democratic Sen. Joe

The coal industry is unlikely to reclaim its ascendant role in energy production nor recover all the jobs lost in recent years. Several determining factors will tell how much bounce actually occurs. Manchin III begged to differ. He called the 1,648-page rule “very alarming in its scope,” and said the methodology of the rule-making was “flawed and lacked transparency.” Manchin has coal-mining constituents, of course, but he was not the only critic of the regulation: This year, the House and Senate employed the Congressional Review Act for only the second time in history to rescind the rule. The stream protection regulation was part of what came to be called President Obama’s “war on coal.” The term was first used in 2009 and, by 2012, had become part of the presidential election campaign: Days before the 2012 vote, the Republican House passed a Stop The War On Coal Act, with the help of 19 Democrats. The Democratic-controlled Senate ignored it. It is interesting that President Obama entered the White House popularly seen as a friend of the coal industry. “This is America,” he said at a 2008 election rally in Virginia. “We figured out how to put a man on the moon in 10 years. You can’t tell me we can’t figure out how to burn coal that we mine right here in the United States of America and make it work.” Ultimately, his administration apparently concluded that not burning the stuff was the best option of all. Cap-and-trade auctions were announced in 2009 — the process by which limits on coal-burning smokestack emissions are imposed, bartered among industries, and systematically tightened. Then the EPA made its Clean Water Act more stringent for areas near mines. Not far behind these regulations were a cross-state air pollution rule banning pollution of areas downwind from a plant and

reduced limits on mercury and carbon dioxide emissions. It is noteworthy that not all of these ideas originated in the Obama administration. The administration’s clean air interstate rule was another iteration of a regulation authored by the George W. Bush administration and shot down by courts, which ordered a new one. The Bush rule, in turn, was a successor to one enacted during the presidency of Bill Clinton. Similar genealogy of rulemaking is evident for other Obama-era rules, most of them originating in clean air and EPA thresholds established in the 1970s. Ideology and Coal The difference was that Barack Obama was ideologically receptive to imposing stricter limits on coal mining operations and did so with few evident qualms about the impact of the rules on local economies. The Trump administration is less ideologically pure. The new president seems to prefer a more pragmatic — and populist — response to coal mining, aiming to incorporate it into the country’s energy future rather than to eliminate it. This mindset naturally is heartening to the coal industry — and to industries that serve it, including heavy machinery manufacturers. Caterpillar, which is reputed to be the largest manufacturer of mining machinery in the world, has struggled in recent years because of a slowdown in mining investments worldwide. But its stock jumped two percent recently on the strength of its management’s focus on getting a better return on its investments and its “exposure to under-invested machinery markets in the early stages of recovery.” For similar reasons, Komatsu America just completed acquisi-

tion of Joy Global, the maker of P&H and Joy products for surface and underground mining. The mining equipment market clearly is strengthening around the world. Yet the only reason the new administration can boldly roll back executive orders and agency edicts — notably few anti-carbon standards in recent years have been legislated — without thunderous political disapproval from Main Street America is because latest generation rules seem to have nebulous effects on the environment. They are sweeping and costly, yet produce negligible environmental results. A center-right non-profit called American Action Forum toted up the cost of the Obama administration’s Clean Power Plan that pressures states to shut down coal plants: $1 trillion in lost productivity, 125,000 lost jobs, and dramatic increases in the cost of electricity. Meanwhile much of the rest of the world — including, of course, China — would push ahead economically, more than offsetting cleaner air produced by straitened industries in the United States. Here’s corollary evidence from another segment of the energy industry: An SMU professor testified to Congress last year that methane emissions from domestic oil and gas have dropped 15 percent over the last 25 years, though production has skyrocketed. In other words, the industry is becoming dramatically more efficient. Nonetheless, the EPA asked for more stringent rules. Then there is climate change. Alarmists say computer-generated data prove the ocean is rising due to man-made pollution, while less alarmed observers point to scientific measurements that largely dispute an envisioned catastrophe. To non-ideological policymakers and business leaders — including coal mining executives — the sound and fury of the strident debate is not helpful. Natural Gas — the Rival Fossil Fuel At least as threatening to coal mines as government regulations is natural gas. It is the coal’s rival for generation of industrial power. Its dramatic increase in availability comes from mushrooming frack-

ing activity around the country over the last decade. The underground cracking open of oil deposits and horizontal drilling techniques that reduce the surface footprint of wells have created new pools of recoverable oil and gas, which have only begun to be tapped. That industry leaders have proven to be fast learners of best practices and cost-effective procedures ensures production will continue for many years to come. This is the chief reason the share of electricity produced by coal has fallen over the decade from 50 percent to 33 percent. PeaBody Energy declared bankruptcy last year. So did four other U.S. coal companies. The burdensome regulatory regime certainly is one reason for the business failures; fracking is the other. Renewable energy sources like solar also are a factor, but a relatively minor one. So even if the regulatory outlook for coal mines is suddenly brighter, abundant supplies of natural gas still will compete with coal for market share. While fracking operations have environmental threats hanging over them, too, especially in respect to ground water, the problems seem more easily remedied. Coal companies surely cannot count on environmentalists shutting down fracking. The wild card in all this is technology. In 2015, a power plant in Canada announced it was capturing 90 percent of the carbon that otherwise would have exited its smokestacks during burning of coal and repurposing it as fuel. Hundreds of thousands of metric tons of carbon dioxide were being captured. The Boundary Dam power plant is powered by brown coal, however, not the more energy-rich black bituminous coal that U.S. producers mine. Even so, the technology may be adaptable to coal burned in this country. On another front, a coal company called Ramaco Carbon is opening a new mine in Wyoming, which is either an act of faith in the future or a foolish move. What makes the opening interesting is that Ramaco also is building a research center to develop new and better products for mined coal. “We’re trying to come up with, frankly, a different idea that will see COAL page 25

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 19

CORPORATE HQ

ELMHURST

JOLIET

OGLESBY

ROCKFORD

HAMMOND

WAUCONDA

635 W. LAKE STREET ELMHURST, IL 60126

16822 W. LARAWAY RD. JOLIET, IL 60433

590 MAYER ST. OGLESBY, IL 61348

5055 SOUTH MAIN ST. ROCKFORD, IL 61102

6400 INDIANAPOLIS BLVD HAMMOND, IN 46320

700 PATTEN DR. WAUCONDA, IL 60084

Call Bobby Falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2011 CAT 262C SKIDSTEER LOADER SER# MST04743 $35,000

2008 CAT 226B2 CAB SKIDSTEER LOADER SER# MJH12997 $19,500

2013 CAT 259B3 COMPACT TRACK LOADER SER# YYZ05184 $38,000

2012 CAT TL943 TELEHANDLER SER#: TBL01963 $69,000

EROPS, AC/HEAT, STD FLOW, Q-CPLR, AUX HYD

EROPS, HEAT, AUX HYDRAULICS, STD FLOW, 60” GP BUCKET, 1952 HRS

ENCLOSED CAB WITH AC/HEAT, M-CPLR, STD FLOW, AUX HYD

EROPS, AC/HEAT, BEACON, LIGHTING PACKAGE, 1952 HRS

2012 CAT CP56B PAD FOOT COMPACTOR SER#: LHC00157 $95,000

2012 CAT CP56B SMOOTH DRUM ROLLER SER#: L8H00102 $98,000

2012 CAT 430F IT LOADER BACKHOE SER# RGS00194 $84,000

2012 CAT 430F IT BACKHOE LOADER SER# RGS00154 $82,000

EROPS, AC/HEAT, LIGHTING, BLADE, 2044 HRS

ROPS, 84” DRUM, PRODUCT LINK, LIGHT PACKAGE

EROPS, E-STICK, 4 WD, 1.5 CYD BUCKET, 2270 HRS

EROPS, AC/HEAT, E-STICK, 4WD, 1.5CYD BUCKET

2014 CAT 324EL HMR TRACK EXCAVATOR SER#: PNW01572 $189,000

2014 CAT 308E2 TRACK EXCAVATOR SER#: FJX00713 $83,000

2012 CAT 730 ARTICULATED TRUCK SER#: B1M03871 $199,000

2006 CATERPILLAR AP-1000D SN# EAD00142 $45,000

AC/HEAT, CD/RADIO, PRODUCT LINK, CERT EMISSIONS, 4055 HRS

SCREED, 10-20B EXTEND-A-MAT, SCREED, FUEL HEATING SYSTEM, 8146 HRS

AC/HEAT, AUX HYD, Q-COUPLER, REAR CAMERA, EROPS, AC/HEAT, AUX-HYD, Q-COUPLER, STRAIGHT TRAVEL PEDAL, GUARDING, 2124 HRS 972 HRS

2013 CAT 980K WHEEL LOADER SER# W7K01627 $285,000

2012 CAT 907H WHEEL LOADER SER#: SJM00774 $60,000

EROPS, AC/HEAT, CAMERA, 7 CYD, AM/FM BT RADIO, 6084 HRS

EROPS, AC/HEAT, Q-COUPLER, AUX-HYD, 22 MPH TRANS, 947 HRS

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 20 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2013 Case 580SN, Tier 4A 4WD, Cab w/ heat & air, 82” long lip bkt, Stk# P10951 $57,000

2013 Case SR175 T4F, 530 Hrs, Cab w/ heat & AC, perf. pkg, heavy duty tires, bkt, Stk# P10815$38,575

2012 Case 580SNWT4A, 1471 Hrs, Cab Heat/Air, Wide Track 4WD Extendahoe, Stk# P05286 $88,500

2012 Case SR250, 1360 Hrs, Open ROPS, Smooth Bkt, Stk# P09142 $29,500

2007 Case Construction 580SM III, 3944 Hrs, Stk# P06371 $47,700

2013 Case SR250T4A, 627 Hrs, Cab w/Heat & Air, 78” Tooth Bkt, Stk# P11007 $39,000

EMPLOYMENT OPPORTUNITY

2012 Case SR175, 1335 Hrs, OROPS, H Pattern Controls, Stk# P07497 $28,700

2013 Case 580SN T4A, 1213 Hrs, cab w/1 dr, Heat & AC, pilot cntls w/ pwr lift, 82” long lip bkt, Stk#P05788 $89,500

2017 Ford Commercial Vehicle Season

POWER YOUR FUTURE WITH DEUTZ

DEUTZ Power Center Midwest is expanding its reach! Immediate Full Time Opportunities:

Chicago, IL: District Sales Manager

North Kansas City, MO: Production Supervisor Warranty Administrator

St. Louis, MO: District Sales Manager Parts Logistics Specialist Shop Service Technician

Generous Benefits 401k Match Competitive Pay

2017 FORD F450 LARIAT, Crew Cab, Stock# H8881S

2017 FORD 550, 4x4, Reg. Cab XL, V10 Auto, Stock# H8892S

2017 FORD F550, 4x4, Reg. Cab XL, 6.7 Diesel Auto, Stock# H8852S

2017 FORD F550, 4x4, Super Cab XL, V-10 Auto, Stock# H8888S

2017 FORD F550, 4x4, Super Cab XTL, 6.7 Diesel Auto, Stock# H8896S

2017 FORD F550, 4x4 Crew Cab XL, V-10 Auto, Stock# H8857S

2017 FORD F550, 4x4, Crew Cab XL, 6.7 Diesel Auto, Stock# H8850S

2017 FORD F550 LARIAT, 4x4, 6.7 Diesel Auto, Stock# H8887S

Apply Immediately:

deutzamericas.com/ employment

FARGO, ND • 800-937-3003 wallworktrucks.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 21

USE S D EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER. R

2005 CATERPILLAR 140H, ID# PUC0262, SN CCA01304, 7678 HOURS...................................... $105,100

2014 CATERPILLAR 242D, ID# QUC0005, SN DZT00918, 572 HOURS............................................ $35,900

2012 CATERPILLAR 246C, ID# QUC0038, SN JAY07620, 1658 HOURS............................................ $31,500

2011 CATERPILLAR 140M, ID# PUC0193, SN B9D02939, 2893 HOURS........................................ $152,000

2014 CATERPILLAR 279D, ID# PUC0146, S/N GTL00959, 1799 HOURS.......................................... $42,900

2008 CATERPILLAR 972H, ID# PUC0243, S/N A7D00689, 16,406 HOURS.................................... $103,900

2015 CATERPILLAR 304E, ID# PUC0321, SN ME400494, 90 HOURS................................................$58,300

2009 CATERPILLAR D6T, ID# PUC0265, S/N SKL00569, 8825 HOURS........................................ $132,700

2005 CATERPILLAR 963C, ID# PUC0235, SN BBD01410, 13911 HOURS........................................ $74,900

2015 CATERPILLAR 262D, ID# PUC0147, SN DTB03159, 126 HOURS............................................ $43,400

2015 CATERPILLAR 287D, ID# PUC0281, SN HMT00516, 600 HOURS............................................$52,200

2013 CATERPILLAR 308ECR, ID# 3CR5288, S/N GBJ01807, 2192 HOURS............................................ $76,910

2014 CATERPILLAR 314EL, ID# 4CR5531, SN ZJT00762, 2259 HOURS..........................................$163,050

2013 CATERPILLAR D6K, ID# 3CR5396, SN WMR00260, 2373 HOURS.................................... $137,580

2014 CATERPILLAR 272D, ID# 4CR5619, S/N B5W00663, 1020 HOURS..........................................$39,100

2012 CATERPILLAR 12M2 AWD, ID# HUC0236, SN R9P00107, 3573 HOURS.................................. $214,450

Page 22 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Roadway Contractor Uses Light-Weight EPS Geofoam By Jim Nugent SPECIAL TO CEG

In retrospect, it sure seems simple, at least to the travelling public. Whether we are driving through a neighborhood or on a highway at speeds in excess of 70 miles an hour, the general public is largely unware of the time, effort and expense that goes into creating safe, drivable roads. Yet for the professionals who design and build our roads, the wellknown complexities are both inevitable and ever-changing. Experienced designers and builders know each project is a new set of challenges and the solutions can only be found in the variables themselves. Take the example of a roadway improvement project in Willowbrook, Ill., a western suburb of Chicago where state Highway 83 crosses 63rd Street in a mostly commercial intersection bordered by a golf course on the northeast side. The scope of work was to replace a box culvert crossing beneath 63rd Street that was used to move water runoff from the golf course to a small pond on the south side of the road. On almost every roadway improvement project, one of the first objectives is to keep traffic moving as effectively as possible throughout construction. “It’s always important to keep the people affected by construction and those travelling on the road happy,” said Anselmo Presisto, the Greco Construction project manager who completed the 63rd Street improvements. A registered civil engineer, Presisto has more than 25 years of hands on design and construction experience. Like the need to keep traffic flowing, Anselmo also suggests that soil settlement also is a factor. “With water draining from the golf course to the pond, the soil along the southeast side of 63rd Street had been settling for a long time,” said Presisto. The result was a swampy area dividing the road from the pond and stabilizing the roadway base would require new fill material. Presisto was a bit surprised to see a line item for a product he’d never used before as Greco was putting its bid together. FoamControl expanded polystyrene (EPS) geofoam, was specified as a structural fill to stabilize the area between the pond and the road. Presisto added that as far as he knew, Greco Construction hadn’t worked with the geofoam blocks either, despite having been in business for more than 70 years. “I’ll admit to being skeptical of putting a road on top of two layers of foam blocks,” said Presisto, “but the ACH Foam Technologies’ representatives were able to show me a lot of similar applications that were supporting much more weight than our project.” Like many first-time geofoam users, Presisto was amazed by its compressive

Greco Construction required no specialized equipment or labor to assemble the geofoam block base layer, solving a complex construction challenge in a few easy steps.

strength. At about one-percent the weight of traditional earth materials, ACH Foam Technologies’ foam-control geofoam is a cellular plastic material with a compressive resistance up to 18.6 psi at 1 percent deformation making it an ideal in-fill solution for roadway improvements with settlement issues. Greco ultimately selected ACH Foam Technologies’ foam-control EPS 19 geofoam after looking at several different products and calculating the logistics of the project. “ACH Foam Technologies had better lead times and more product availability,” said Presisto, who was working with a tight 60day schedule and needed to be sure there would be no material shortage delays.

Beyond availability and the price, ACH Foam’s technical assistance really made Presisto comfortable with his decision. During the ordering process, an installation design pattern was developed for the length of the fill using 24 by 40 by 96 in. (61 by 101 by 244 cm) foam-control EPS geofoam blocks. As a first-time user, Presisto wanted a little extra confidence in the structural assembly and felt good knowing that his ACH Foam representative would be on site during installation. “Building the work was very easy with the geofoam,” said Presisto. “We excavated the area and then put in the subbase and laid in the geofoam blocks by hand.” He reported that his team was able to lay

ACH Foam Technologies’ foam-control geofoam has a compressive resistance of up to 18.6 psi at 1 percent deformation, making it an ideal in-fill solution for roadway improvements with settlement issues.

the first 600 cu. yds. (458 cu m) of geofoam in just a few hours. ACH Foam supplied a hot wire cutter to trim pieces when needed and Greco ended up with very little waste. As the initial installation of geofoam was nearing completion, Presisto was so pleased with the product that he quickly suggested it to engineers as a solution for an independent challenge that arose in the field. In the section of the work where the drainage channel was being improved, the design called for filling around the box culvert with lightweight concrete. When water table issues were discovered, the concrete’s longer cure time was going to extend the construction schedule by at least seven days. Presisto suggested the geofoam as a lightweight fill that would allow construction to proceed unimpeded. Since the ACH Foam Technologies representative was available when the challenge was discovered, understanding the technical specifications of the various types of geofoam was simple and new material was quickly delivered. The hot wire cutter was used to precisely shape blocks and a rebar lattice was assembled over the foam. Construction of the overall project was completed on schedule without additional cost. “It was a great first experience with a very useful product,” said Presisto, who is sure he’ll come across many more challenges that can be solved with an EPS geofoam infrastructure most people will never see. (Jim Nugent works at ACH Foam Technologies)

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 23

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

2012 CATERPILLAR D6K LGP, 1,688 Hrs. $139,000

2014 CATERPILLAR D6T XW, 942 Hrs. $CALL

2012 CATERPILLAR TL943, 3,305 Hrs. $CALL

2017 BELL B30E, 11 Hrs. $CALL

EXCAVATORS

LOADERS

BACKHOES

2017 LBX 210X3, 4 Units............................ $CALL

2016 CAT 926M, 67 Hrs.......................... $135,000

2016 DEERE 410L, 75 Hrs........................ $113,000

2017 LBX 160X4, 4 Hrs.............................. $CALL

2015 KAW 80Z7, 152 Hrs........................ $220,000

2016 DEERE 310SL, 605 Hrs...................... $99,000

2017 KOB SK260LC, 6 Hrs............................$CALL

2015 KAW 70Z7, 2 Units.......................... $179,000

2017 KOB SK210LC-9, 15 Units.................... $CALL 2017 KOB SK170LC, 2 Hrs............................$CALL

2015 CAT 420F2, 2 Units.......................... $99,000 2014 DEERE 310SK, 726 Hrs...................... $89,000

2015 KAW 67Z7, 2 Units ........................ $146,500

2012 DEERE 310SK, 645 Hrs........................ $CALL

2017 SANY SY235CLR, 2 Hrs........................ $CALL

2015 CAT 926M, 500 Hrs..........................$135,000

2012 NH B95C, 1,112 Hrs.......................... $63,000

2017 SANY SY215CLC, 6 Units...................... $CALL

2013 KAW 60ZV2, 2,665 Hrs...................... $79,500

2008 NH B95TC, 1,229 Hrs........................ $47,500

2016 LBX 350X4, 53 Hrs............................. $CALL

2013 KOMATSU WA200-6............................ $CALL

2004 DEERE 310SG, 5,408 Hrs.................... $34,500

2016 LBX 235X3LC, 6 Hrs........................ $175,000

2012 CAT 950K, 8,463 Hrs........................$118,900

2016 LBX 145X3DZ, 2 Units...................... $135,000

2012 CAT 938K, 3,493 Hrs........................$104,500

2016 KOB SK350LC, 2 Units........................ $CALL

DOZERS 2012 DEERE 624K, 3 Units........................$129,000

2016 KOB SK260LC, 3 Units........................ $CALL 2016 KOB ED160, 143 Hrs............................$CALL 2016 KOB SK140SR, 2 Units........................ $CALL

2016 DEERE 700K LGP, 2 Units.................. $165,000 2013 DEERE 650K XLT, 2,019 Hrs................ $89,000

2012 VOLVO L50G, 1,341 Hrs.................... $83,000 2011 CAT 908H, 2,404 Hrs........................ $49,000

2014 CAT D6T XW, 942 Hrs.......................... $CALL 2012 CAT D6T XL, 1,851 Hrs.................... $255,000

2016 KOB SK85CS-3E, 3 Units.................. $109,000

2011 KOMATSU WA200-6............................ $CALL

2013 DEERE 550K XLT, 1,911 Hrs................ $99,500

2016 SANY SY235CLR, 477 Hrs.................... $CALL

2009 CAT 924H, 9,548 Hrs.......................... $CALL

2012 CAT D6N LGP, 2,509 Hrs.................. $169,500

2015 KOB SK140SR, 2 Units.................... $132,000

2008 KAW 80ZV-2, 6,953 Hrs......................$64,500

2012 CAT D6K LGP, 1,686 Hrs.................. $139,000

2015 KOB SK210LC-9, 4 Units.................. $169,000

2007 KOMATSU WA250, 6,324 Hrs.............. $76,500

2011 CAT D7E, 1,589 Hrs........................ $319,000

2015 DOOSAN DX160W-3, 30 Hrs.............. $129,500 2014 KOB SK350LC, 164 Hrs........................ $CALL

2006 KOMATSU WA250, 5,522 Hrs.............. $82,000 1999 CAT 980G, 28,716 Hrs........................$72,000

2014 SANY SY235C, 802 Hrs.................... $135,000 2013 KOB SK295LR, 1,450 Hrs.................. $205,000

2011 CAT D6K XL, 2,703 Hrs.................... $105,000 2011 CAT D3K LGP, 1,273 Hrs.................... $66,500

1986 FIAT FR12B.................................... $16,500

2013 KOB SK260LR, 1,592 Hrs.................. $195,000 2013 SANY SY135C, 721 Hrs...................... $82,000

2011 CAT D6T LGP, 3,193 Hrs....................$189,000

2011 CAT D3K XL, 709 Hrs........................ $85,000 2008 KOMATSU D61EX, 3,850 Hrs.................. $CALL

COMPACTORS

2007 CAT D6T XL, 3,429 Hrs.................... $157,500

2012 KOB SK260LR, 1,690 Hrs.................. $124,500

2015 DYNA CA2500D, 2 Units.................... $89,000

2006 CAT D6N XL, 7,703 Hrs...................... $75,000

2012 SANY SY135C, 862 Hrs...................... $82,000

2015 DYNA CA2500PD.............................. $93,000

2006 CAT D6R XL, 7,296 Hrs........................ $CALL

2008 CAT 325DL ...................................... $CALL

2015 BOMAG BW177D-5, 2 Units................ $69,500

2006 CAT D6R XWIII, 7,384 Hrs.................... $CALL

2008 KOB SK350LC, 3,241 Hrs.................. $125,000

2015 HAMM H161, 609 Hrs........................ $75,000

2006 KOB SK235SR, 4,957 Hrs....................$79,000 2006 KOMATSU PC300LC............................ $CALL

2006 DEERE 650J XLT, 3,457 Hrs.................. $CALL 2005 CAT D6N XL, 9,250 Hrs...................... $76,500

2014 DYNA CA1300PD, 2 Units......................$CALL

2005 CASE 1650K XLT, 3,029 Hrs................ $52,000

2004 DEERE 120CLC, 2,415 Hrs.................... $CALL

2012 HAMM 3410, 3,739 Hrs...................... $48,500

2004 CASE 1850K XLT................................ $CALL

2001 HYUNDAI 180LC3, 4,383 Hrs.............. $48,500

2006 CAT CS533E, 888 Hrs.......................... $CALL

2003 CAT D6R XW II, 11,874 Hrs................ $99,000

1979 CAT 245, 2,622 Hrs.......................... $25,000

2006 CAT CS423E, 1,503 Hrs........................ $CALL

1997 CAT D5M, 4,600 Hrs..........................$42,500

Page 24 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

563-87 72-4112

(DUBUQUE) BELLEVUE, ELLEVUE, IOWA

WWW.JJSCHECKEL.COM HECKEL.COM

CLE EAN,, WORK-READY EQUIPMENT Q IN IO OWA - WE OWN WHA AT WE ADVERTISE E! GET INFORMAT TION O ON ANY MACHINE VIA EMAIL! 9 Detailed Inspection Rep port 9 T TA2 A2 Pressure Testing Repor e t 9 ECM Download Report 9 Service History (when available) 9 Detailed Pictures Call 563-872-4112 or eemail sales@jjjsche jscheckell.c .com o

RENTOR

BUY!

2005 CAT D6R LGP II - $110,000 6,409 Hours, Erops p , Diff Steerr,, A/C, Veryy ggood Undercarriage. Reputa p tion machhine, Goodd history. h F lly serviced. Fully

BUY!

2012 CAT 980K - $ $245,000 8,867 Hours, Ride d control,l Scale le, Excellent ll tires, Verified one ownerr,, one oper p ator a machine. Rent/Lease or BBuuy.

RENTOR

BUY!

RENTOR

BUY!

2012 CAT CS56 - $84,,000 84”Vibratory b y smoothh dr d um. 1,597 hou h rs, Goodd tires. Original ppaint. Op Oppen cab. b Veryy well maintained. Fully serviced se or Buy. i d and ready d to go. Rent/Leas R

RENTOR O

BUY!

RENTOR

2008 CAT 938H - $95 5,000 , 6,400 Frame hhours, 2,984 Idle dl hours h s recorded. d Excellent rubberr,, HHyydraulic coupler p r,, Au Aux hyydraulics, GP bucket, Ride control, EExcellent ll machine. m h

BUY!

RENTOR O

BUY!

1994 CAT 992D - $470 0,000 Fullyy refurbished, f b h d $$352,000 workk orddeer just j spen p t. 2,000 hour main componen p ts. Ne New tires! 2 i ! Call for documents. d

UY!

‘07 SMI 4043T CRUSHE ER - $215,000 2007 SMI 516T SPYDER YDER - $150,000 2014 CAT D6T XW VPAT - $285,000 2014 CAT D6T XW VPAT - $238,000 2 800 Hrs, Hrs Mobile M b l track, trackk 600 TPPH, PH 3 wayy scr screen een. Belts l lik like OOnly nlyy 906 original g hourrs, rs 302 at idle. idle Er Erops ops p , A/C, Heat Heat, 2 300 Hours 2,300 Hours, Er EErops ops p , A/C, Diff steerr,r, GPS ready readyy,y, Mobile Track Mount Mounted ed Impac Impact p t Crusherr,r, 4,900 4 900 Hrs, Hrs 2,800 w,, Original g pain p t. Easy life as a topsoil p il screen. Remote GPS PS ready dy,y, DDiffff steerr,, 6-w A close to new New track groups O ownerr,, Ex d f b h d. Remote Control. new 300 TPH, Complet p elyy refurbished 6--way PA PAT blade, As ps, One Excellent condition. or Buy. as you will find! Supeer clean. Rent/Lease or Buyy.. H d ffoldable ld conveyeers. Rent/Lease R /L R Rent/Lease or Buy. Side stacker & magnet options. Reent/Lease or Buyy.. control,l Hyd

RENTOR O

2012 CAT D6T LGP VPAT - $238,000 $ 3,975 Hours, CAT warrantyy until 2018. GPS readyy,y, Good UC, Veryy clean, Original g l condition, No ffaults, l As nice as they h y come. Rent/Lease R e or Buy. y

RENTOR O RENTOR B

RENTOR

2001 CAT 777D - $ $280,000 Fully lly refurbished f b h d. $$100,0000 spent. Veryy good tiri es, details andd ppici tures on our website. b N truck, Nice k RRent/Lease /L e or Buy.

RENTOR

BUY!

2007 CAT CS-563E – $62,000 5,000 Hours, 100% New tires, Originall ppaint, Clean l condition,, Runs and operates to sppec, Thr Th ough g shop andd ready d to go. Rent/Lea R L ase or Buy B y..

2003 CAT D6R X XW - $128,000 Onlyy 7,700 original g hours! urs! Retiringg farmerr,, SU BBlade, l d Cab, C b Sw S eeppps, Paccar P W h Winch. Rent/Lease or Buy. y

BUY!

1998 CAT D5C C LGP III - $36,000 4,700 Hours, Oropss, 6 Wayy blade, Power shifftt, Good undercarriaage g . Clean, Original, and Mechanic hanicallyy sound. d

RENTOR

BUY!

2012 CAT 966K K - $205,000 5,300 Hours, 6 Month CAT warranty, w y, QQuick coupler p r,, Aux. hyydraulics, GP bucket, Excellent E tires, Original g l, Super clean machine. Rent/L R ease or Buyy..

RENTOR

2007 CAT 9 966H - $120,000 8,100 Hours, 2,950 Hours were at idle. dl GP buck bucket, 100% NEW tires, Original g pain p t, through g shop and ready to goo. RRent / Lease or Buyy..

RENTOR

BUY!

2010 CAT 140 0M VHP - $125,000 , 2001 CAT 627G G - $225,000 4,900 Hrs, 1,025 hrs h w were at idle. dle Extremely ly clean, l Erops p , Push/Pull, h ll Goodd 33.25 rubber bb r,, Engine g major Original g pain p t, Jooyystick control, 14’ 4’ BBlade, ld by CAT dealerr,, Tigh by g t neck ppins & bushings i g . From F 24 Rubber. R bb None Nicer. Ni Rent/Lease or Buy. reputable b previous ownerr,, clclean. lean. RRent/Lease /L or Buy. 14.00+24

RENTOR

BUY!

2009 CAT AT 938H - $105,000 3,700 Hours, Ride de control,l Like L k new rubber bb r,, Original g paint, GP buckett, As close to new as you will fifind. d R Rent/Lease or Buy. Buy

RENTOR

BUY!

2013 CAT AT CP56B - $89,000 84”Vibratory ” b y ppadd foot. 2,460 hours hours, Front blade bl option, Original g l ppain i t. Very well maintained. Fully serviced i d andd rreeady d to go. RRent/Lease or Buy.

USED AND N RECONDITIONED PA ARTS HOTLINE

BUY!

2001 CAT CP-32 23C - $34,000 2,850 Hours, 40”Vibrat ” b oryy ppadd foot roller ll r,, 12,000 lbs. Clean, Original g , andd Mechanically M h sound. Rent/Lease /L or Buy.

J.JJ. SCHECKEL RENT TS 1/3/6 Mo M Co Contracts. t t Re R nt/Pur t/P rchase h O ti Options.

2013 CAT AT 329EL - $140,000 Onlyy 4,780 original g nal hours, Fullyy loaded, 10’6”” SStick, Auxiliar l y hyddraaulics, l Longg andd wide UC, Pattern changer g r,, 32”” BBucket. Rent/L R /Lease or Buyy. y.

2005 CAT H1 180CS - $59,500 , Unusedd Hammerr,, AAs-NNew. 12,000 ftf lb energy gy class, 9,000 lb weigh g t, 275-4450 bpm, p , 7.07”” ttool diameter. Fits Cat 34 349EL 9EL thr hru 390F size cavators. siz exca

Genuine OEM EM Cat Full availabilit lity of used CA ATT par p ts, 50% off list, carriers, h housings, gears, etc. Also huge selec election of attachments and d componen nents in stock. If we don’t ha h ve it, we will find it! Parts locatin ng service. Call Mattt Meyer e 563-872-4112

VISIT OUR WEBS SITE FOR DETAILED D PHOTOS AND DESCRIPTIO ONS! WWW.JJSCHE ECKEL.COM

Ph: 563-872-4112 563 872 4112 | Fax: 563-872-5058 563 872 5058 | sales@jjscheck s el com | 21582 Hwy 62, el.com 62, Bellevue v , Iowa 52031 | www w w.jjscheck .jjscheck jjscheckel.com el com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 25

Fewer Regulations Support Coal Industry Growth

THE

COAL from page 18

ultimately result in an alternative use for coal, which would not necessarily burn it,” said Ramaco CEO Randall Atkins. The first alternative product the company research team will focus on is coal-derived carbon fiber for use in construction of lightweight cars. A new mine also is opening in Pennsylvania, but for a different reason. Corsa Coal Corporation’s new mine will produce 400,000 tons of metallurgic coal. That is, its production will go to the manufacturing of steel, whereas 95 percent of coal mined in the United States is thermal coal, which is burned for energy. This is the point: Corsa is opening the mine to take advantage of the Trump administration’s declared intent to increase infrastructure projects, which means an increase in steel production for bridge components and rebar. Coal mining seems to have a future. Just what that future is isn’t exactly clear. As Murray predicts, tens of thousands of coal workers may report back for work in the next few years, but surely not all of them.

END IS NEAR

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

afety y WN TRUCTION

M AY 8 – 1 2 , 2 0 1 7

Time is running out. Don’t miss this opportunity to grab a Tier 3 Flex portable air compressor

Stop p Falls Sta and-Dow wn

before they’re gone. Tier 3 units are still available from 750 to 1800 cfm,

` Plan a toolbox x talk or other safety f a activity

pressures up to 500 psi. In order to secure your Tier 3 Flex machine, orders must be placed prior to September 1st. Order now before it’s too late...

` Tak ake a break tto talk about how w to prevent falls ` Pro ovide training for all workers w Photo: National Framers Co ouncil

All Tier 3 machines must be completed prior to December 31, 2017

U.S. Depar tment of Labor

OSHA 3774-01 2017

For m more inform mation: www.osha.gov/S StopFallsSttandDown #StandDown4Sa afety • (80 00) 321-OSH HA (6742)

Safety Pays. Falls Cost.

LEARN MORE AT:

www.Sullivan-Palatek.com

(219) 874.2497

Page 26 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Fabick CAT Hosts Its Annual Season Opener in Eau

abick CAT held its 29th annual Season Opener on April 21 and 22 at its Eau Claire, Wis., location. This event kicked off a series of events celebrating Fabick CAT’s 100th anniversary. Guests were invited to see new products on display, enjoy lunch and win door prizes. John Fabick Sr. founded the company in 1917 while adopting the moto “To Ever Serve Our Customers Better.” These words remain the foundation of the company and are displayed at each of the company’s 37 locations. For more information, visit www.fabickcat.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG (L-R): Jerry and Marilynn Auman, both of J&M Excavating, talk with Mike Lurndal, Fabick CAT, in front of a Cat D6K dozer. Customers enjoy a barbeque lunch in the shop area of the Eau Claire, Wis., facility.

(L-R): Bob Seppa, director of equipment asset management; Tom Svetnicka, vice president of marketing; and Jere Fabick, president of Fabick CAT, welcome guests to the annual Season Opener. (L-R) are Tom Scalzo, Fabick CAT; Chad Gerke, Gerke Excavating; and Tom Muehlenkamp, Fabick CAT. Loren LaGesse (L), Fabick CAT, shows the outside equipment display area to Dean Amys of Amys Excavating.

Bill Groepper of Groepper Excavating brought his grandson, Trenton, to the open house to look at all the big Cat machines.

(L-R): Kevin and Lowell Brubacher, both of Brubacher Excavating, and Bob Alger of Alger Construction attend the event.

Dennis Ruid of Ruid Excavating said he liked this Cat 262D skid steer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 27

Claire, Wis., to Kick Off Series of 100-Year Celebrations

A variety of Cat equipment was on display at the open house.

(L-R): Steve Clements, Brent Haglung and Brian Kusilek, all of the Pierce County highway department, stand in front of this Cat 938M wheel loader.

Dean Trippler (L) of Source Energy Services receives a warm welcome from Jim Sands, Fabick CAT, at the open house. Fabick CAT offers McCloskey crushers and screening plants. (L-R): Joseph Gilles, Josh Chrusciel and Blake Pozarski, all of B.S. Lawn Care, and Tom and Harold Kempen, both of Backyard Stone, enjoy their time at Fabick CAT’s Season Opener in Eau Claire.

Chris Kline (far R), Fabick CAT, welcomes (L-R) Dave Luedtke and T J Thompson, both of Dave Luedtke Excavating, and Buck Niblett of Buck Niblett Construction to the open house.

Travis Boyd (L) and Boone Peterson, both of Pierce County, Wis., highway department, check out the Cat wheel loaders.

Steve Hemshrot (L) of Johnson Family Forestry speaks with Cory Vrolijk of Fabick CAT about the PF48 processing head.

Page 28 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Minn. Officials Unveil Slate of 2017 Road Projects

UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE

ST. PAUL, Minn. (AP) Minnesota transportation officials unveiled a slate of 2017 road projects on April 13 with a warning: the roster of $1 billion in projects could be the last big spending for years to come. Work on portions of the state’s busiest freeways — I-94 in both Minneapolis and St. Paul, I-694 in Arden Hills, and I35W in south Minneapolis — can be expected to disrupt travel for millions of motorists in the months ahead. The state also expects this year to complete the St. Croix River Crossing, the Highway 36 bridge connecting Oak Park Heights, Minn., and St. Joseph, Wis., and the long-discussed and long-delayed relocation of Highway 53 in Virginia, Minn., that includes the construction of what will be the tallest bridge in Minnesota. State Transportation Commissioner Charles Zelle said when the new fiscal year kicks in July 1, “There are not sources to maintain a billion-dollar program.’’ He added, “This is the period where we are winding down. We won’t be seeing this kind of robust program in future years.’’

We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on mostt excavators can deliver the h extra force you need to break through – but only in short bursts. We knew there had to be a better waay, so we took our jobsite exp x erience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavator o s from the SK210LC to the SK500LC. It provides all the extra muscle you neeed continuously so you can power through the toughest jobs without interruption.

MINI

S T R A D IU S SHOR

CONVENTIONAL

KOBELCO-USA.COM

We have PARTS for your IH, Dresser, Dressta Machines with OVERNIGHT DELIVERY!

“It’s important that legislators work together to find a long-term, sustainable funding solution this year so the transportation system does not continue to degrade.’’ Charles Zelle Minnesota State Commissioner

Dressta TD15M Extra: New 6-Way Blade, Long Track, Trimble GPS Equipped, Brush Sweeps, 3 Year 4000 Hour Warranty, 26" Track Shoes.. .......................................................... $295,000

2013 Kobelco SK80CS: Great condition with only 1024 hours complete with hydraulic coupler and Geith bucket. U/C is 80% with 24" shoes. Enclosed cab with heat and a/c............ ............................................................ $78,000

2015 Kobelco SK210-9: Very clean, very nice. Hand control auxiliary hydraulics, hand control pattern changer, pneumatic seat. Comes with Strickland 42" bucket with Esco teeth and weld on Strickland hydraulic thumb. 451 hrs, still under warranty!................................ $146,500

SERVICE

UNDERCARRIAGE

Shop and field services! We specialize in rebuilding components such as engines, transmissions, and final drives. We are proud of our ability to accommodate your needs with any make and model!

Aftermarket undercarriage components for any make and model!

618-435-2330 Benton, Illinois WWW.BRTRACTOR.COM OEM & Aftermarket Undercarriage Components for your IH or Dresser, as well as Aftermarket Undercarriage for any Make & Model!

MnDOT faces an $18 billion shortfall over the next 20 years due to flat revenue sources and rising costs. That means in future years, big ticket items will be fewer and far between, meaning no funding for tackling projects such as rebuilding the I-35W and I-494 interchange, ranked as the 17th most congested in the nation, or rebuilding I-94 between Minneapolis and St. Paul. Democrats and Republicans disagree over how best to fund transportation projects, with Democrats favoring a hike in the gas tax for a reliable long-term money stream. Republicans generally oppose raising the tax. “Our budget will see a 30 to 40 percent reduction in our capital program,’’ Zelle said. “With more than half of our state roads older than 50 years, and 40 percent of our bridges more than 40 years old, the need is outpacing available resources. It’s important that legislators work together to find a long-term, sustainable funding solution this year so the transportation system does not continue to degrade.’’ The Star Tribune reported that many major repairs and rebuilds are already under way.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 29

Volvo Used Equipment Contact your local dealer:

2012 Volvo EC480DL $215,000

2014 Volvo L90G $155,000

2012 Volvo EC340DL $170,000

John Doe 123.456.7890 john.doe@dealer.com

2012 Volvo L250G $370,000 2012 Volvo A40F, 2999 Hrs............$500,000

Jane Doe 123.456.7890 jane.doe@dealer.com

Dealer Name City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 Contact your local dealer: City, ST

Aring Equipment 123.456.7890 Company, Inc. 13001 City, STW. Silver Spring Drive Butler, WI 53007 123.456.7890 City,King ST Jim 123.456.7890 262.781.3770 Mobile: 414.530.0592 City, 262.781.5053 ST Fax: 123.456.7890 Email: jking@aring.com www.aringequipment.com

2011 Volvo DD138HF 1993 Volvo L150 $59,500 $25,000 2012 Volvo A40F, 2999 Hrs............$500,000

2012 Volvo A40F $295,000

A40 Finance leasing available for 24 months with payments as low as $7,800 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Excavators – Wheeled

Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2012 A25F 2011 Volvo L220G Model,Volvo Hours ............................................................................... $XXX,XXX $169,500 $249,500 Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

Excavators – Crawler Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2013 Volvo EC300DLR 2015 Volvo L70H Model, Hours ............................................................................... $XXX,XXX $220,000 $165,000

Motor Graders Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

2014 Volvo L110H $210,000

DO NOT RUN COPY BELOW THIS RULE

DEALER LOGO

2012 Volvo A25F 2012 Volvo$169,500 A40F, 2999 Hrs............$500,000

2015 Volvo L90H $177,500

Page 30 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar 623G Elevating Scraper, 1:50 Scale - $85

Caterpillar D9T Track-Type Tractor, 1:50 Scale - $120

Caterpillar 963D Track Loader, 1:50 Scale - $75

Caterpillar 950H Wheel Loader, 1:50 Scale - $70

Caterpillar CT660 Yellow Dump Truck, 1:50 Scale - $85

Caterpillar CT660 Red Dump Truck, 1:50 Scale - $85

Caterpillar 308E2 CR SB Mini-Excavator, 1:32 Scale - $85

Caterpillar 335F L Excavator, 1:50 Scale - $95

Caterpillar 336D L Excavator, 1:50 Scale - $100

Caterpillar 374D L Excavator, 1:50 Scale - $110

Caterpillar 568 GF Road Builder w/bucket thumb, 1:50 Scale - $125

Caterpillar D8R,Series II Track-Type Tractor, 1:50 Scale - $85

Caterpillar D6T XW VPAT Track-Type Tractor w/AccuGrade GPS, 1:50 Scale - $90

Caterpillar 320D L Excavator, 1:50 Scale - $85

Caterpillar 680 Yellow 6x4 Tractor w/Rogers Trailer, 1:50 Scale - $200

Caterpillar D4,1953 Tractor w/4S Bulldozer, 1:16 Scale - $190

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 31

KEEP YOUR COMPAANY COVERRED WITH A

CLEARSPAAN STRUCTURE

GET INDUSTRY-SPECIFIC INFORMATION T AT CLEARSPAN.COM A

F OR NEARLY LY 40 YEARS C LEAR R S PAN F ABRIC S TRUCTURES has been providing the construction uction industr industry with the most versatile line of building solutions. ons. V ERSATILE D ESIGNS - Whether you need a structure that is temporar temporary or permanent, for workspace or storage, there is a ClearSpan structure.

C OST -E FFECTIVE B UILDING S OLUTIONS - Draastically reduce construction costs, monthly utilities and maintenance requirements, irements, with a structure that is superior in quality.

F INANCING A VAILABLE - Speak to your Truuss Arch Specialist today.

2841 Verona Rd. • Verona, KY 41092 (859) 485-8500 • Fax: (859) 485-8573 www.newmantractor.com

V ISIT WWW . CLEARSPPAN . COM OR CALL 1.866.643.1010 TO FIND OUT HOW WE CAN HELP WITH YOUR STRUCTURE NEEDS

WHY BUY REBUILT, WHEN YOU CAN BUY REMANUFACTURED TO ORIGINAL DEUTZ FACTORY STANDARDS. Q

We are so confident about the quality of DEUTZ Xchange engines that we offer a national three-year limited, fully transferrable warranty.

DEUTZ Xchange engines are assembled with 100% genuine DEUTZ replacement parts and undergo a 300-point reconditioning process, which includes all the latest engineering advancements.

DEUTZ Xchange provides a no-hassle core return policy, and speedy delivery.

DEUTZ Xchange engines are available for the following:

914 Series

1011/2011 Series

1015/2015 Series

912/913/914 Series

413/511/513 Series

1012/1013 Series

2.9/3.6 short & long blocks

2012/2013 Series

Your source for DEUTZ Xchange engines across the Midwest.

DEUTZ Power Center

Page 32 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ May 6, 2017 â€¢ Page 33

BACKHOE LOADERS Deere 310SJ, 2008, 2927 hrs, &DE Z R DLU [ SZU VKLIW WUDQV H[W GLSSHU w EN .... $39,975 Deere 410E, 1998, 6895 hrs, Cab w/o air, 4.4 pwr shift trans, ext dipper, frnt cplr ..... $25,900 Deere 410G, 2001, 3758 hrs, Turbo, 4x4 pwr shift trans, aux hyd, ext. hoe, bkt ....... $29,900 Deere 410G, 2002, 5285 hrs, 7XUER [ SZU VKLIW WUDQV TFN FSOU w ENWV ............ $34,500 Deere 410J, 2011, 4178 hrs, AC, turbo, 2wd pwr shft, ext dipper, cmptr, hammer ..... $34,000 Deere 410L, 2016, 259 hrs, AC, pilot cntrls, 4x4 pwr shift, ride cntrl, qwk cplr ........$112,000 Volvo BL70, 2003, 3539 hrs, Cab w/o air, 3 lvr, 4x4, ext dipper, aux hydr, & much more .... Call

CRAWLER DOZERS Deere 450H, 2000, 3070 hrs 5236 ORQJ WUDFN w SDGV K\GUR WUDQV w EODGH............. Call Deere 550J, 2005, 6852 hrs &DE Z $& ORZ JUQG SUHVV w SDGV K\GUR WUDQV ...... $44,500

EXCAVATORS

SAVE TIME â€¢ SAVE MONEY SAVE LABOR â€¢ SAVE OIL â€¢ â€¢ â€¢ â€¢ â€¢

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool â€¢ One hand installation â€¢ Eliminate hydraulic oil spills & clean up â€¢ Quick installation & ease of usage â€¢ Safe for personnel & environment â€¢ Industry acclaimed â€¢ 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available

All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Deere 135D, $& OQJ DUP VWG ERRP w SDGV DX[ K\GUO PRUH .. $102,000 AC, lng arm, std boom, rubber pads, aux hydrl, cplr .... $165,000 Deere 160GLC, $& OQJ DUP VWG ERRP w SDGV w ENW........... $52,500 Deere 200CLC, $& OQJ DUP VWG ERRP w SDGV FSOU w ENW ..... $62,500 Deere 200DLC, . $79,500 Deere 200DLC, Deere 290G LC, 2011, 2432 hrs $& FSOU DX[ K\U w ENWV .................. $172,900 Deere 450DLC, 2006, 8530 hrs, AC, med-lng arm, wide pds, cntr wgt rmvl w/bkt .. $89,000 Deere 470G, 2014, 2142 hrs AC, med-lng arm, std boom, wide pds, aux hydr ...... $349,000 Hitachi ZX85USB-3, 2011, 2207 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w ENW . $77,500 .......... $102,000 Deere 350D, 2009, 6705 hrs ..... $139,000 Deere 350D, 2008, 6777 hrs, . $79,000 Komatsu PC600LC-7 Volvo ECR235, 2014, 1296 hrs, .... $149,500

SKID STEERS Deere 318D, 2012, 334 hrs, A/C,EH cntrls, BBT,gen purp bkt ......................... $27,500 Deere 320D, 2013, 131 hrs ROPS, EH Cntrls, Rev Fan, GP Bkt ........................ $37,500 Deere 320D, 2013, 403 hrs, &DE ZLWK $ & (+ FQWUOV w ENW .......................... $29,900 Deere 323D, 2011, 1026 hrs, &DE Z $& IRRW FQWUOV VSG UXEEHU WUDFNV w ENW .... $27,500 Deere 328D, 2010, 914 hrs, Cab w/AC, foot controls, 2 spd, gen purpose bkt ........ $32,500 Deere 328D, 2012, 631 hrs, AC, EH cntrls, air ride seat, 2 sp, self-leveling, ........... $33,000

WHEEL LOADERS 2015 JD 544Ks - 11 in stock, 270-672 hours, starting @ $145,900 (AC, Coupler, 3 yd bkts, some avail. w/3rd valve & Hi Lifts, municipal owned) Deere 524K, 2015, 464 hrs, AC, 3 Spool, Ride Cntrl, Dual Diff Lcks, 20.5 Tires ..... $149,900 Deere 544E, 1990, 9811 hrs, Cab w/o AC, 17.5 tires, gen purp bkt ................... $21,000 Deere 544J, 2005, 5040 hrs, ride cntrl, dual diff locks, 20.5 tires gen purp bkt ....... $69,000 Deere 624K, 2015, 1559 hrs, AC, qk cplr, dual diff lock, 20.5 tires, gen purp bkt ... $152,000 Deere 624H, 2002, 10989 hrs, Cab w/o AC, ride cntrl, dual diff locks, gen purp bkt .. $42,000 Deere 644C, 1984, 0 hrs, Cab w/o AC, 20.5 tires; gen. purpose bucket ................. $15,500 Deere 644G, 1995, 18541 hrs, AC, ride cntrl, frnt diff lock, 26.5 tires, gen purp bkt .. $29,500

Contact John Reinen (used equipment manager) at 608-220-1723 or Lewis at 608-837-5141 ext.1019

For Photos & Detail Descriptions visit: www.brookstractor.com Six Locations in Wisconsin to serve you Sun Prairie (Madison) z Milwaukee z De Pere (Green Bay) West Salem (La Crosse) z Plover (Stevens Point) z Mt. Pleasant (Racine)

Page 34 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Managing Growth…

Manitou Group Names Richard Alton President, CEP Division

The 2016 Municipal Safety Day

Efficiency Production to Host Annual Municipal Safety Day In conjunction with the Michigan Rural Water Association (MRWA), Efficiency Production Inc. is set to host its 11th annual Municipal Safety Day on June 1 from 8 a.m. to 4 p.m. at Efficiency Production’s corporate headquarters in Mason, Mich. As in the past, participants at Municipal Safety Day will qualify for MDEQ continuing education credits. The agenda for Municipal Safety Day includes: • Confined Space Training, presented by Michigan Rural Water Association • MIOSHA Standards for Soil Classification, presented by Efficiency Production • Backhoe Operator Training, presented by AIS Construction Equipment Corp. • Proper Rigging Safety, presented by F.D. Lake • Pipeline Maintenance Demonstration, presented by Jack Doheny Companies • Hydraulic Shores Uses and Safety, presented by Efficiency Production • Hydro-Excavation with Shoring Demonstration, presented by Jack Doheny Companies • Free barbeque lunch and raffle There is no cost to attend Municipal Safety Day. “Municipal Safety Day is designed specifically for Michigan’s public works personnel,” said Mike Ross, Efficiency Production’s national training coordinator.

“These are the workers who routinely need to perform duties that cross a spectrum of potentially dangerous situations. Our goal is to educate DPW workers on the entirety of excavation and construction safety.” Once again in 2017, there will be many municipal-relevant safety and construction equipment on display from several vendors, including: • Purity Gas • Municipal Supply Co. • Northern Concrete Pipe Inc. • First Due Fire Supply • Capital Equipment • Tri-County Int’l Trucks • Signature Ford • Golden Image Embroidery • Etna Supply • E.J. Company • K & H Concrete Cutting • Milwaukee Tools Pre-register for Municipal Safety Day at the Michigan Rural Water Association website, www.mrwa.net (click on events tab). Efficiency Production Inc. is a manufacturer of trench shielding and shoring equipment such as “trench boxes” and vertical hydraulic shores. Efficiency’s manufacturing facility and corporate headquarters are located at 685 Hull Rd, in Mason, Michigan, 10 mi. south of Lansing. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Manitou Group announced the appointment of Richard L. Alton II as president of the compact equipment product division, effective April 17, 2017. Alton will report directly to Michel Denis, CEO of Manitou Group. “I would like to thank Dan Miller for his years of dedication and committed service to Manitou Group. We wish him well as he pursues the next chapter in his life,” said Denis. “And we are very excited about being able to bring Rick into the organization at this time. His experience and talent will be a definite benefit to manage the growth we anticipate from these changes.” For nearly a decade at JLG, Alton had responsibilities for managing all facets of international markets which included sales, after sales support, global product launches, and overseeing strategic partnerships on a worldwide basis. He was most recently with Contech Engineered Solutions.

“I am fortunate to have this opportunity to work with a world class organization,” Alton said. “And I am looking forward to expanding the product portfolio, innovations, and product quality to continuously improve the customer experience. Manitou Group is poised to make some major gains in the market.” Manitou Group is a world-leader in the design, manufacture, distribution and servicing of all-terrain material-handling equipment for construction, agricultural, mining and industrial applications. The product range offerings include: telehandlers; all-terrain, semi-industrial and industrial masted forklifts; skid steers, track loaders, and articulated loaders; access platforms; truck-mounted forklifts; and warehousing equipment and attachments. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CEG Reaches All Generations

Three-and-a-half-year-old Nicklaus Knuckley, son of Kevin Knuckley and grandson of Paul Knuckley, both principals of Witch Equipment Co., Fort Worth, Texas, loves Construction Equipment Guide (CEG). Nicklaus’s great grandfather, Gifford Glover, founded the company in 1960 and Nicklaus is already doing his homework by reading CEG so that he will be well educated to run the company someday as the family’s fourth generation to do so.

SECTION

Attachment & Parts Pages 35-37

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

ArborWolf UltraGrinder Attachment Boosts Efficiency The UltraGrinder by ArborWolf, Burnsville, Minn., has a radial piston motor for maximum productivity, a cushioned parallelogram mechanism for drivetrain protection and teeth on both sides of the cutting wheel to allow for dual-direction cutting. It also features Greenteeth technology as standard equipment. The UltraGrinder delivers the productivity of a dedicated stump grinder but at around one-fourth of the initial cost, according to the manufacturer. It is currently available for low- and high-flow skid steers from 16 to 45 gal. per minute (GPM), and versions for mini-skid steers and mini-excavators will be available soon. ArborWolf President and Product Development Manager Jerry Holman said that, compared to other stump grinder attachments, the UltraGrinder is as much as 150 percent more efficient. “This the most productive attachmentstyle stump grinder in the industry,” Holman said. “Our design makes it incredibly efficient while keeping it as simple as possible.” Plug-N-Grind ArborWolf created the UltraGrinder for a range of users, including professional tree and tree-maintenance contractors and companies, landscapers, farmers, ranchers and landowners. The UltraGrinder’s simple connection and operation also make it ideal for the rental industry. The UltraGrinder performs all the functions of other stump grinder attachments without any auxiliary or electrical controls, harnesses or circuits for raising and lowering, swinging or telescoping. Due to the way the UltraGrinder operates, those functions are not needed. “If you can run a skid steer, you can efficiently and safely grind with an UltraGrinder,” Holman said. “All you need to do is plug in three hoses and go cut wood.” Cushioned Parallelogram Mechanism At the center of the UltraGrinder’s efficiency, productivity and safety is the cushioned parallelogram mechanism. The inno-

With an UltraGrinder, the operator drives up to the stump, positions the attachment, drives forward and cuts. Once that cut is made, the operator simply lowers the unit several inches and backs up, making another cut in the process. With other skid steer stump grinder attachments, the operator has to lift the attachment, back up, lower the unit, reposition it and drive forward again to make another cut.

The UltraGrinder’s cushioned parallelogram mechanism provides 3 in. of give in both directions. Combined with teeth on both sides of the cutting wheel, the mechanism makes it possible to cut both forward and backward.

vation alleviates excess pressure on the cutting wheel, protects the drivetrain and extends product lifecycle, according to the manufacturer. The parallelogram mechanism consists of a rubber torsion element and four heavyduty link arms that connect the cutting head to the mount frame. When an operator begins to cut into a stump and applies pressure against the cutting wheel, the four link arms move against the rubber torsion element in unison to provide up to 3 in. of cushioned movement for the UltraGrinder cutting head and to keep it 90 degrees to the cut at all times. The design improves on cushioning systems that are typical in other stump grinder attachments, which rely on springs — and often only a single spring — connected between the mount frame and the cutting head. The spring extends as the machine pushes the cutting wheel into the stump. While this provides some protection, it tilts

the wheel away from the ideal 90-degree cutting angle. A stump grinder attachment that relies on a single spring for cushioning rotates on only one pivot point. As an operator presses into a stump, the cutting wheel tilts out of vertical, changing its angle of attack on the stump by 5 degrees, then 10, then 15 and so on. The angled orientation of the teeth in relation to the stump results in a shallower cut. It also creates what is essentially a ramp, and the cutting wheel is prone to catching and traveling up the ramp to jump out of the cut. Dual-Direction Cutting The UltraGrinder also features teeth on both sides of the cutting wheel, which is an ArborWolf exclusive that allows operators to cut safely in both forward and reverse directions through a stump. The cushioned parallelogram mechanism, which cushions in both directions, makes cutting both ways possible.

90+ Percent Efficiency Operators can grind more stumps in less time with the UltraGrinder due to the radial piston motor. The UltraGrinder is able to channel more of a machine’s power into the cutting wheel, and the result is an attachment that is 92 to 95 percent efficient compared to the approximately 60 percent efficiency of other skid steer stump grinder attachments, according to the manufacturer. For example, with a 50-hp machine, the UltraGrinder is able to channel 46 to 47.5 hp to the cutting wheel. A machine that is 60 percent efficient will channel only 30 hp to the cutting wheel. “You can’t squeeze water out of a rock, so if a skid steer is rated for 23 gpm at 3,500 psi, that’s what you have to work with,” Holman said. “What we’re doing with the UltraGrinder is extracting every ounce of horsepower from the machine and channeling it into the cutting wheel to achieve extreme productivity.” The cutting wheel also spins at 1,000 rpms. The high rotation rate translates into fast cutting and smooth operation because the potential for wheel grabbing or sudden stops is minimized. “The UltraGrinder is easy on, easy off and very small so it’s easy to carry with you,” Holman said. “It also costs a lot less than other grinder attachments or dedicated equipment. What’s most important, though, is the fact that the UltraGrinder is going to save you time and make you even more money when you use it.” For more information, call 800/905-2265 or visit arborwolf.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 36 • May 6, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

HDB Series…

Hyundai’s Hydraulic Breaker Series Includes 14 Models The HDB series of hydraulic breakers from Hyundai Construction Equipment Americas Inc. includes 14 different models to fit multiple machine sizes and applications. Hyundai breakers have a large chisel diameter, which increases the strength and durability of the chisel. Four chisel options are available. Hyundai small breakers are suited to fit compact excavators ranging from 1.7 to 8 tons (1.5 to 7.2 t). Midsized HDB breakers

are designed to fit excavators ranging from 14 to 25 tons (12.7 to 22.6 t). Large model HDB breakers fit excavators ranging from 30 to 80 tons (27 to 72.5 t). For use on a Hyundai excavator, standard equipped mounting brackets match up perfectly with the Hyundai linkage. When used on other excavator brands, Hyundai dealers can fit custom mounting brackets for any machine. The HDB breakers offer a large diameter tie bolt for high performance and optimum durability. Hoses connecting the inlet/outlet ports use a new adapter type that avoids bolt breakage and oil leakage. An auto-greasing feature protects moving parts from undue wear. For more information, visit www.hceamericas.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The four mid-sized models in the Hyundai HDB series of hydraulic breakers are designed for use on excavators in the 14- to 25-ton (12.7 to 22.6 t) range.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • May 6, 2017 • Page 37

TRANSF F RMER. TM

THE NEW WA WA AY Y TO P PR CESS M MA ATERIAL TERIAL.

AY OU O

LU Group Inc. (800) 939-2558 usa@allu.net

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

Page 38 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Firms Compete With Each Other for Best Workers JOBS from page 1

Mike Rabideau

Minnich Hires Western Regional Sales Manager Minnich Manufacturing, a manufacturer of concrete dowel pin drills, concrete vibrators and vibrator monitoring systems, announced the hire of Mike Rabideau as Western region sales manager. Rabideau joins Minnich after 16 years at Wyco, where he most recently served as Western region sales manager. At Minnich, he will be responsible for sales and service across 12 states: Alaska, Arizona, California, Hawaii, Montana, Idaho, Nevada, New Mexico, Oregon, Utah, Washington and Wyoming. “Mike will be an outstanding resource for Western dealers and contractors,” said Todd Jurjevic, Minnich vice president of sales. “He brings deep product knowledge and a passion for helping dealers and customers succeed. We’re excited to add him to the Minnich team.” After starting his career as an assembler of vibration products in 2001, Rabideau transitioned into service technician roles before becoming a product specialist. He was named Wyco’s Western region sales manager in 2014 and covered all states west of the Mississippi River. Minnich also announced a variety of other personnel additions, including: • Allen Bragg, manufacturing engineer/CNC. Bragg is responsible for initializing and controlling the CNC machining process. • Dave Clute, senior project engineer. Clute’s responsibilities include new product development, lean manufacturing and project management. • Zach Farley, engineer. Farley designs tooling and fixtures to efficiently manufacture Minnich products. • Jake Ihaz, director of information technology. Ihaz oversees all forms of computer technology at Minnich. • Suzanne Medved, administration/purchasing assistant. Medved helps manage workflow and purchasing processes. • Triton Minnich, marketing, social media and graphic design. Minnich manages digital marketing efforts and handles graphic design. For more information, call 800/524-1033 or visit www.minnich-mfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

While the overall number of building permits issued within city limits fell last year, their combined valuation of more than $701 million set a new record. Despite the workforce increases, the construction industry is struggling to keep up with the demand and is experiencing an overall shortage of workers. “I think our biggest thing with our workforce development is trying to get to the students earlier,’’ said Allen Homes, general manager Kim Hefner-Hines. The Home Builders Association of the Sioux Empire started an after school carpentry program for middle school students in Harrisburg and last year ran a summer construction camp. Because demand for workers is so high, even new workers can earn decent wages. Entry-level construction jobs in Sioux Falls pay between $13 and $14 per hour, Hefner-Hines said. Corey Johnson, president of the Home Builders Association, said construction companies are competing with each other for the best workers. “We’re busy as can be,’’ Johnson said. But “we could use more people to help us get through this busy time.’’

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Project Part of Long-Term Plan to Reduce Overflows OVERFLOW from page 1

utilities engineering manager. The massive project is expected to create local jobs. “We’re proposing to go almost 25,000 feet, or five miles, starting at our east Dwenger site next to our water pollution control plant, basically following the Maumee River and then the St. Marys River down to the northern end of Foster Park,” Kiester said. Indianapolis is undertaking a similar project. Work began in 2012 on building 27 miles of 18-foot diameter tunnels as part of a $1.6 billion project aimed at reducing the release of raw sewage into Indianapolis’ rivers. Construction is expected to continue until 2025. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677 Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715-254-2777 Now Open Racine (Mt. Pleasant), WI 262-898-6700

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ May 6, 2017 â€¢ Page 39

SMALLER FRAME. BIG-TIME PRODU UCTIVIT Y. Our 250D-II and 300D-II ADTs give you the competitive edge you need d in a 25- or 30-ton truck. Boasting fast cyccle times and excellent poweer-to-weight ratios, they mo ove material at a low cost per ton. But whatt really sets these prime mo overs apart from other ADTs Ts is i their ability to survive, even thrive, on ro ough terrain, steep slopes, aand mud. Limited-slip differrentials on the 300D Series-II and transfer case differential lock provide a traction boost in ppoor underfoot conditions. 7R NHHS PDWHULDOV DQG SURÆ&#x;WV Æ RZLQJ VHH XVV WRGD\ DERXW D ' 6HULHV ,, $'7

www.nortrax.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

Page 40 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Briggs & Stratton Completes Vanguard Noise, Vibration, Harshness Lab Briggs & Stratton Commercial Power recently opened the doors on its new noise, vibration and harshness lab, which incorporates automotive-grade technology to accelerate testing and create highly productive, long-lasting commercial engines. The facility’s capacity and capabilities help OEMs deliver equipment to the market in less time while backed by the most thorough testing available, according to the company. “Our team of engineers and application specialists are continually looking to improve productivity, engine performance and user comfort,” said Brett Birschbach, NVH engineering manager, Briggs & Stratton Corporation. “We put our engines through a rigorous testing protocol to ensure the quietest and smoothest running designs.” The new NVH facility not only offers modern testing chambers but also an experienced team of engineers and senior-level technicians. The team of seven, led by Birschbach, has more than 140 years of combined experience. Birschbach has more than 15 years of NVH experience with direct experience in NVH testing in the automotive industry. The equipment and software used in the new facility is sourced from the latest technology developed for the automotive industry. It exceeds the testing capabilities of any other small engine manufacturer by extending beyond simply testing the engine alone. The enhanced NVH lab enables testing of the engine while integrated into the equipment. This provides valuable data on the engine and allows OEMs to expedite their path to market. In some cases, testing can be completed in just 30 percent of the time it would take with industry-standard equipment. The reduced time required for testing decreases costs for OEMs and, in turn, their customers. The new lab includes two soundtesting chambers: a standard chamber for vibration testing and detailed analysis and a larger chamber designed for certification testing, where Vanguard engineers test for domestic and international noise regulation compliance. Vanguard uses the large chamber to conduct comprehensive tests with the engine mounted to a piece of equipment. This allows engineers to better replicate actual operating conditions.

American State Equipment Co. Inc.

Aspen Equipment Company

www.amstate.com 2055 South 108th Street Milwaukee, WI 53227 414/541-8700 2400 North 14th Avenue Wausau, WI 54401 800/242-7113 13915 Lake Drive Columbus, MN 55025 651/464-0996 2385 Becks Road Duluth, MN 55810 218/260-0581

www.aspenequipment.com 1525 S.E. Cortina Dr. Ankeny, IA 50021 515/965-1000 Fax: 515-965-1790 11475 S. 153rd St. Omaha, NE 68138 402/894-9300 Fax: 402-894-9302

Cleveland Crane & Shovel Sales, Inc. Kirby Smith Machinery Inc.

Vanguard’s noise, vibration and harshness lab incorporates automotivegrade technology, resulting in highly productive, long-lasting commercial engines.

Extensive indoor testing is possible because of an advanced air handling system that exchanges 100 percent of the chamber’s air every minute. In both sound chambers, data is gathered using a dynamometer isolated in a sealed area below the floor. By isolating the dynamometer, noise from the device cannot interfere with engine noise, ensuring consistent and reliable measurements. Dynamometer sound testing is done not only to measure volume but also to help engineers design engines with a more pleasing tone and pitch, which improves operator comfort as well as lessens concerns when working in residential neighborhoods or populated areas. Vanguard’s NVH lab also conducts two primary vibration tests. The first uses an accelerometer to measure the degree to which an engine’s vibration will transfer to a piece of equipment. The second tests for potential component failure using an electro-dynamic shaker to replicate real-world, application-specific conditions. The electro-dynamic shaker test is conducted to determine product life expectancy for specific parts and components. If a part failure occurs, or vibration concern is noted, engineers can modify designs to counteract the

problem. For example, a component’s weight distribution may be re-engineered to counteract vibration. After changes are made, technicians repeat the tests to ensure that the engine will perform optimally for its intended application. The lab’s advanced electro-dynamic shaker makes it possible for engineers to replicate the effects of 1,000 hours of real-world operation in only 300 hours. “We’ve led the way in NVH testing since the early 1970s, and I’m proud that we continue to implement the latest testing equipment. This reflects our ongoing commitment to improving productivity and comfort for our customers,” said Jim Cross, marketing manager, Briggs & Stratton Commercial Power. “The technology we use helps Vanguard develop engines that are among the most refined and durable products for the commercial engine market.” The facility in Milwaukee, Wis., replaces the former NVH lab, built in 1972. For more information, visit www.vanguardengines.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300 • 877/851-5729

Walter Payton Power Equipment LLC www.wppecrane.com 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260 2832 Fitzgerald Rd. Louisville, KY 40216 877/847-3434 920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 3400 Claremont Avenue Evansville, IN 47712 812/422-6912 Fax: 812/422-6982

www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 800/352-2757 Fax: 952/884-2293

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 41

APA PACIT Y AN NT N TAGE

UP TO

47 %* *

Compared to GMK5150 competition

adius with maximum counterweight

NEW W GMK5150 and GMK5150L

AN NYWHERE. The h strength e h and d mobility bili to handle h dl more jjobs. s. The new w GMK5150 and GMK51150L deliver great ROI due to outstand ding lifting capacitiess and greater jobsite j a accessibility.

lifting ting capacities in ounterw nterweight configurations GMK5150L High-per -performing boom capable of lifting g 11,6 t with 60 m boom — ideal forr tower crane rigging GMK5150 with 51 m boom

•150 t maximum capacity •Narrow w 2, 2 75 m width on 445//95R25 tires •Fuel-effi fficient single -engine design d

Compact p dimensions sions with reduced overall length ength and width

Impressiive lifting, jobsite man neuverability and fuel efficiency help you u achiev hi e greater profi fits. fi

Crane Control System y (CCS) with Boom Configurator ator enhances operator controll and efficiency

Contact your local Grove dealler, or go to www.manitowoccranes.com i m to learn more.

Easy operator access ccess on the crane for secure, fast rigging; igging; especially when working att heights

Page 42 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Fleet Community…

NTEA’s 2017 Fleet Purchasing Outlook Reveals Optimism Among Respondents NTEA recently published the 2017 Fleet Purchasing Outlook, which explores the commercial vehicle landscape and measures common acquisition incentives. This study is designed to give the work truck industry a glimpse into anticipated movement within the fleet community. “The 2017 Fleet Purchasing Outlook is an excellent resource for the work truck industry,” said NTEA Executive Director Steve Carey. “This report reveals directional patterns that can guide companies in effective response to market swings and vocational fleet activity.” Based on survey responses from a wide variety of fleet professionals in mid- to high-level management, the Outlook analyzes current data, with results from previous research initiatives serving as a benchmark to establish trends and allow year-to-year comparisons. Report findings provide a window into the current mindset of commercial fleet managers and reveal insights into: • Average truck age and replacement cycles • Macro-level buying tendencies • Projected changes in 2017 fleet size • Critical factors driving purchase behavior • Interest in advanced truck technologies and alternative fuels • Importance of financial purchasing incentives

“This report reveals directional patterns that can guide companies in effective response to market swings and vocational fleet activity.” Steve Carey

NTEA

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. With Komatsu CARE you can: • Lower your cost of ownership • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

MIDWEST KOMATSU DISTRIBUTORS

Berry Tractor & Equipment Select respondent feedback • 39 percent: intend to increase their vehicle count in 2017 (a 7-percent upswing from the previous year) • 56 percent: exceed normal replacement cycle • 93 percent: plan to make at least some vehicle acquisitions for 2017 (an uptick from 86 percent registered last year) NTEA members can access the 2017 Fleet Purchasing Outlook for free in print or a downloadable PDF. Nonmembers can purchase the report for $199. For more information, call 800/441-6832 or visit ntea.com/fpo. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Design of ALLU TS Drum Assembly Enables Flexibility for Multiple Projects ALLU’s drum assembly construction allows customers to achieve flexibility in performing multiple jobs with one unit, just by repositioning the standard screening blades. Manufactured for the existing ALLU D-Series material processor bucket frames, the core of the ALLU TS technology is the configuration of the screening blades that spin between the screening combs. The end product size is defined by the space between the combs, and different fragment sizes can be achieved simply by repositioning the combs. Because the screening combs carry most of the material weight, the drums and bearings experience less impact and load. The design of the assembly ensures the machine works well in wet and dry materials without clogging. The TS drums are available with two different blade types: standard blades for screening applications and axe blades when a crushing or shredding effect is required. Blade sizes available include 0.63/1.26 in. (1.6/3.2 cm), 0.98/1.97 in. (2.5/5.0 cm) and

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

www.berrytractor.com KS Garden City 620-277-2290 • 877-469-1763 Topeka 785-266-9509 • 877-469-1763 Wichita 316-943-4246 • 877-469-1763 MO Springfield 417-831-2651 • 877-469-1763

Brandeis Machinery & Supply Company www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

Columbus Equipment Company www.columbusequipment.com OH Cadiz 740-942-8871 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Massillon 330-833-2420 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681 Zanesville 740-455-4036

Continental Equipment Corp. The TS drums are available with two different blade types: standard blades for screening applications and axe blades when a crushing or shredding effect is required.

1.38 in. (3.5 cm). The TS assembly is available in seven different models for 17.6- to 49.6-ton (16 to 45 t) excavators and 7.7- to 33-ton (7 to 30 t) wheel loaders.

For more information, call 800/9392558 or visit www.allu.net. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.ceceq.com MI Lansing 517-321-8000 MI - Continental Equipment Corp. Service Branches Bridgeport 989-777-0090 • 989-777-1583 Lenox 586-727-7502 • 586-727-7311 New Hudson 248-437-8121 • 248-437-9750 Williamsburg 231-267-5060 • 231-267-5257

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 43

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 • 888-762-6312 Rapid City 605-348-7438 • 800-658-3047 Sioux Falls 605-336-0411 • 800-456-4005

General Equipment & Supplies www.genequip.com ND Bismarck 701-223-9700 • 800-279-4437 Fargo 701-282-2662 • 800-437-2924 Minot 701-852-0479 • 800-852-0479 Williston 701-572-0570

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Co. www.rmsequipment.com IA Cedar Rapids 319-363-9655 • 800-616-6615 Des Moines 515-282-0404 • 800-555-1445 Sioux City 712-252-0538 • 800-633-9104 IL Milan 309-787-1742 • 800-633-9114 MN Duluth 218-727-8611 Savage 952-895-9595 • 800-888-9515 Virginia 218-741-9011 • 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 Carterville 618-985-3399 Marengo 815-923-4966 Springfield 217-789-7711 IN Portage 219-764-8080 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 Cape Girardeau 573-334-5252 Columbia 573-814-0083 Palmyra 573-769-2056 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898

www.komatsuamerica.com/komatsu-care

Page 44 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Opportunity is knocking— —save on Kubota’s versatile U Series compact excavators today!

0 Down, 0% Financing for 60 Months

A.P.R.

Offfer ends 6/30/17..

Martin Implement Sales, Inc. www.martinimplement.com 18405 115th Avenue Orland Park, IL 60467 708/349-8430 Fax 708/349-4230

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. 2001 Cherry Hill Rd. Waukegan, IL 60087 Joliet, IL 60433 847/336-1205 815/464-6650 Fax 847/336-2697 Fax 815/464-6951 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

1st Choice Equipment LLC www.1stchoiceequipment.com 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Lano Equipment, Inc.

ABC Equipment

www.lanoequip.com

www.abcequipment.com

Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

Corcoran, MN 888/479-4342 763/479-8200

29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949

Southeastern Equipment Co., Inc.

Niebur Tractor & Equipment, Inc.

www.southeasternequip.com

www.nieburtractor.com

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868

14380 240th Street E. Hastings, MN 55033 651/437-3531

38525 Chester Rd. Avon, OH 44011 440/934-7368

*$0 down, 0% A.P A P.R. financing for up to 60 months on purchases chases of new Kubota U Series equipment is aavailable to qualified purchasers from m participating dealers’ in-stock inventory thrrough 6/30/2017. Example: A 60-month monthly installment repayment term at 0% A.P.R. requires 60 payments of $16.67 per $1,000 000 financed. 0% A.PP.R. .R. interest is available to customers if no dealer documentation preparation fee is charged. Dealer charge foor document preparation fee shall be in accordance rdance with state sta laws. Inclusion of inelligible equipment may result in a higher blended ded A.P.R. 0% A.P.R. and low-rate financing ma may not be available with customer instannt rebate offers. Financing is available througgh Kubota Credit Corporation, U.S.A., 1000 Kubota K Drive, Grapevine, TX 76051; subjectt to credit approval. Some exceptions apply. Offer O expires 6/30/2017. See us for details oon these and other low-rate options or go too www.kubota.com for more information. Opttional equipment may be shown.

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

kubota.com k

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 45

www.dieselmachinery.com

www.vlpco.com

4301 North Cliff Ave. Sioux Falls, SD 57104 888-753-8907

4100 Gardner Ave. Kansas City, MO 64120 800-878-9290 816-241-9290

3801 North Deadwood Ave. Rapid City, SD 57702 800-658-3047 39288 133rd St. Aberdeen, SD 57401 888-484-6312

Joplin 800-878-8223 417-781-8222 Springfield 800-955-2729 417-887-2729 Wichita 800-878-3346 316-838-3346 Topeka 800-878-4345 785-267-4345 Garden City 800-511-1435 620-275-1996

www.brookstractor.com Madison (Sun Prairie) 1900 W. Main St. P. O. Box 9 Sun Prairie, WI 53590 608-837-5141 Fax: 608-837-4012 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 Fax: 414-462-7242 Green Bay (De Pere) 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 Fax: 920-336-6405

La Crosse (West Salem) 451 W. Avenue N. West Salem, WI 54669 608-786-2644 Fax: 608-786-2206 Stevens Point (Plover) 5429 Prairie Dr. Plover, WI 54467 715-254-2777 Fax: 715-254-2799 Now Open Racine (Mount Pleasant) 1609 SE Frontage Rd. Mt. Pleasant, WI 53177 262-898-6700

Bobcat of St. Louis 401 West Outer Road Valley Park, MO 63088 636-225-2900 1885 West Terra Lane O’Fallon, MO 63366 636-240-9020 9801 West State Route 161 Fairview Heights, IL 62208 618-397-1847 www.bobcatofstl.com Bobcat of Columbia 1101 N Lenway Drive Columbia, MO 65202 573-866-9436 www.columbiabobcat.com Bobcat of Marion 1417 Donna Drive Carterville, IL 62918 618-985-8920 www.bobcatofmarion.com Bobcat of Evansville 2934 Lynch Road Evansville, IN 47711 812-422-8200 www.bobcatofevansville.com

Page 46 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

McCloskey International Invests in Response to Worldwide Growth KOBELCO-USA.COM

Grand Equipment Co. 3310 Hudson Trails Dr. Hudsonville, MI 49426 616-896-7700 Fax: 616-896-6700 www.grandequipment.com

Southeastern Equipment Co., Inc. Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 1356 3rd Street Brilliant, OH 43913 740-598-3400 1500 Industrial Parkway Brunswick, OH 44212 330-225-6511

Mid Country Machinery 3478 5th Ave S Fort Dodge, IA 50501 800-206-5936 4734 Sergeant Road Waterloo, IA 50701 319-234-8710 106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

McCloskey Manufacturing Centre of Excellence.

Screening and crushing industry leader McCloskey International has continued its expansion over the past three years, with close to 35 percent growth overall, increased market share, major investments in its manufacturing facilities, and the introduction of a new division. In lockstep with this growth was the addition of more than 30 dealers to the global distribution network. The new Manufacturing Centre of Excellence opened its doors at the Granville Industrial Estates in Dungannon, Northern Ireland, in April to house additional production for the McCloskey range. The new site will deliver increased assembly and production space for the crushers, screeners and stackers, as well as the new washing systems range. The new 120,000 sq. ft. building and site is expected to deliver 50 percent increase in production over the next 3 years. The new site also will house the production for new business division McCloskey Washing Systems (MWS), focused on washing and classifying across multiple applications. The new unit designs and manufactures a full range of mobile, modular and static material and mineral washing equipment. Also contributing to the company’s growth has been its commitment to after sales service and support. Two new parts hubs have recently opened

their doors to serve customers around the world, one in the United States, and the other in Northern Ireland. The Milwaukee, Wisc., 43,000 sq. ft. parts and service depot offers same day air or ground dispatch throughout the Americas, while the 10,000 sq. ft. facility in Coalisland, Co. Tyrone serves Europe and an expanding worldwide market. The dedicated sites allow for expedited delivery of parts regardless of physical location. McCloskey also has expanded to support its growing crusher business with the acquisition of Milwaukee Crusher, based in Wisconsin. The site serves as a dedicated crusher repair facility, with the ability to rebuild and repair all makes of crusher, portable and stationary, as well as provide expert crushing system analysis and advice. “Accelerating sales of our equipment show that the quality, reliability and durability of McCloskey products is increasingly recognized around the world, and important to our customers,” said John O’Neill, VP, sales of McCloskey International. “As important for McCloskey is the relationship after the deal is done, and the opening of facilities to continue to support our customers with parts and service allows us to provide both quickly and effectively.” Between 2008 and 2012, the foot-

print of the facilities increased by more than 50 percent, with five new buildings and production areas in Canada alone. 2017 to 2020 will see more expansion to accommodate demand, including the new Manufacturing Centre of Excellence in Dungannon. In addition to its physical expansion, the company has continued to add new international dealers across all regions to represent the number of new products that were added to the company’s portfolio. The over 30 percent growth has resulted in a network of close to 100 dealers in virtually every region of the world from South America to South Korea, Alaska to Australia. Reflecting back, Paschal McCloskey, president and CEO of McCloskey International noted “three years ago we had 65 dealers, and our goal was to grow to close to 100. We have achieved that goal, and continue to work to expand our reach, and our markets, worldwide. There have been many contributors to our success, but one of the greatest is the loyalty of our customers worldwide. Their commitment to our products is the engine behind our growth.” For more information, visit www.mccloskeyinternational.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910 3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479 8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Miller-Bradford & Risberg, Inc.

404 Breaden Rd. Monroe, OH 45050 513-539-9214

W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

6415 Promler Ave. N. Canton, OH 44720 330-494-3950

DeForest, WI 608-222-9191

27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331

Eau Claire, WI 715-832-3443

7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321

De Pere, WI 920-338-5800

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 47

Blue Ridge Tractor

Illinois Truck & Equipment Co.

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 48 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AEM Lauds Firms for Data Reporting The Association of Equipment Manufacturers (AEM) has presented Statistics Outstanding Merit Awards to 36 companies for their exemplary performance in AEM data reporting programs. The awards recognize member companies for timely and accurate data submission, meeting attendance and timely response to ballots, audits and surveys during the 2016 calendar year. “These winners enhance our ability to provide meaningful equipment-specific market trend and benchmarking data to assist members’ business planning,” said Rex Sprietsma, AEM director, statistics and market information. AEM statistics activities encompass more than 200 unique product programs covering information from county-level retail sales data in North America to shipments data on a global basis. Winning companies have received a cumulative performance rating of 90 percent or better based on corporatewide performance. AEM presented the awards during its recent spring statistics conference in Fort Lauderdale, Fla. The annual con-

ference featured a general session, in addition to the meetings of several AEM statistical committees, where members review product programs’ reporting requirements, and vote on member proposals, all of which help ensure the association statistics provide members with optimum value. AEM recognized the following 36 companies as 2016 “Statistics Outstanding Merit Award” winners: * Indicates a 100-percent score • AGCO Corporation * • Alamo Group Inc. • Allen Engineering Corporation • Altec Industries Inc. • Amerequip Corporation • Caterpillar Inc. * • Charles Machine Works • CNH Industrial • Deere & Company * • Haulotte Group BilJax • Hyundai Construction Equipment Americas Inc. • INDECO North America Inc. • JLG Industries Inc. * • KCM Corporation • Kobelco Construction Machinery USA • Komatsu America Corp.*

• Krone NA Inc. • Kuhn North America Inc. • Lemken Canada Inc. • Link-Belt Construction Equipment Company • MacDon Industries Ltd • Manitex International • Manitowoc Cranes Inc. • Sellick Equipment Limited • Skyjack • Sullair LLC • Superior Industries • Tadano America Corporation • Takeuchi • Thompson Pump & Manufacturing Inc. • Tigercat Industries Inc. • The Toro Company • Vac-Con Inc. • Vermeer Corporation • Volvo Construction Equipment North America LLC • Wirtgen America Inc. For more information, visit www.aem.org in the Market Data/Statistics section. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Regis Sherry Joins Curry Supply as Veep of Operations Curry Supply Company announced that Regis Sherry has joined the organization as vice president of operations. Sherry has more than 26 years of experience in operations with several industries. In this new role, he will be responsible for leading the manufacturing, quality, safety, engineering, purchasing and performance of operations through continuous improvement methods that will support the continued growth of the Curry Supply organization. “Taking the time to really listen, learn and exceed the expectations of both our customers and employees is the true balance that defines continued success as an organization. I will do everything possible to meet these goals through open dialogue with both our customers and employees,” said Sherry. “We are very happy to have Regis join our team,” said Jason Ritchey, Curry Supply president. “He brings a wealth of operational experience as well as a solid understanding of supply chain management, continuous improvement and Lean manufacturing.” For more information, call 800/345-2829 or visit www.currysupply.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Regis Sherry has joined the organization as vice president of operations. In this new role, he will be responsible for leading the manufacturing, quality, safety, engineering, purchasing and performance of operations through continuous improvement methods that will support the continued growth of the Curry Supply organization.

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

KENTUCKY Diamond Equipment www.diamondequipment.com Bowling Green 270-781-1061

OHIO CAT www.OhioCAT.com Richwood 888-446-4658

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental) Oakwood Village 800-633-1020

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 49

ILLINOIS DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273

WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville 630-355-7150 Rockdale 815-730-9011 Rockford 815-961-3160 South Holland 708-331-6362 Wauconda 847-526-7700

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

HISTORY LESSON: Which compact grader has a 65+ year USA Heritage?

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 49

ILLINOIS DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273

WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville 630-355-7150 Rockdale 815-730-9011 Rockford 815-961-3160 South Holland 708-331-6362 Wauconda 847-526-7700

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

HISTORY LESSON: Which compact grader has a 65+ year USA Heritage?

Page 50 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SMALL MACHINE. BIG PRODUCTIVIT Y. The world of land dscaping is centered on deesign, collaboration, and fu unctionality. You could say the same abo out our G-Series Skid Steers and Compact Track Loaderrs. That’s because owners and operators likee you provided design input to ensure our newest lineup could haul, grade, load, prep, push, install, sweep, and lift whattever you throw its way. Feaaturing exceptional visibility, y durabilitty, y and serviceability, y yyou’ll spend sp more of yyour time bu uildingg the wall rather WKDQ KLWWLQJ LW $QG WKDWŤV MXVW WKH EHJLQQLQJJ 6WRS LQ RU FDOO WR ƟQG RXW PRUH

Burnsville, MN 952-890-8880

Sauk Rapids, MN 320-259-6222

Grand Forks, ND 701-772-4842

Aberdeen, SD 605-225-6772

Rochester, MN 507-282-8888

Moorhead, MN 701-526-2200

Minot, ND 701-852-3962

Sioux Falls, SD 605-336-2730

North Mankato, MN 507-387-1836

Bismarck, ND 701-223-5798

Williston, ND 701-577-0736

Rapid City, SD 605-348-1566

Marshall, MN 507-532-0994

Dickinson, ND 701-483-0115 www.rdoequipment.com

Minnesota Equipment Rogers, MN 763-428-4107 Minnesota Equipment Isanti, MN Jesse Kraft 763-444-8873 www.MinnesotaEquipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 51

Howell Tractor www.howelltractor.com 480 Blaine Street • Gary, IN 46406 219/810-6327 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Custom Truck & Equipment www.cte-equipment.com 7701 E. 24 Highway • Kansas City, MO 64125 800/861-1065 • 816/241-4888 Fax: 816/241-8826

Grand Equipment Company www.grandequipment.com 3310 Hudson Trail Dr. • Hudsonville, MI 49426 616/896-7700 Fax: 616/896-6700

Construction Machinery Company www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 Fax: 502/261-9251 2235 Ragu Drive • Owensboro, KY 42303 270/683-2000 • 877/683-2262 Fax: 270/683-3727 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661 Fax: 502/732-8355

P Promi sees Keppt

Kelbe Brothers Equipment Co., Inc. www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 Fax: 608/221-0610 3101 French Rd. • DePere, WI 54115 920/343-6496 Fax: 920/343-6449

Reed Company, LLC www.reedsales.com 2738 Fauna Road • Lebo, KS 66856 620/256-6609 Fax: 620/256-0288 Junction US 24 & 99 Hwy • Wamego, KS 66547 785/456-7333 Fax: 785/456-6714

KCMA Corporation | 770.499.7000 | KCMCORP.COM 2140 Barrett Park Driv 2 D e,, Suite 101 | Kennesaw, GA 30144

Page 52 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SECTION

Trucks & Trailers Pages 53-59

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

XL Specialized Trailers Introduces Power Tail to Lineup XL Specialized Trailers has introduced a new trailer to its lineup with the XL 80 Power Tail trailer. Ideal for transporting mediumduty construction equipment, the trailer features a hydraulic foldunder flip tail ramp for quick loading and unloading of hard-to-load equipment. With a load angle of 10 degrees, the hydraulic tail is equipped to easily handle man lifts, rollers, forklifts and paving equipment. The XL Power Tail is rated at 80,000 lbs. (36,287 kg) overall and 50,000 lbs. (22,679 kg) concentrated in 10 ft. (3 m). The tail has a lift-

With a load angle of 10 degrees, the hydraulic tail is equipped to easily handle man lifts, rollers, forklifts and paving equipment.

ing capacity of 25,000 lbs. (11,340 kg) for loads centered on the main platform. The tail is comprised of

two sections — an 8-ft. 8-in. (2.7 m) platform ramp and a 60-in. (152 cm) flip tail. Lug-style hinges pre-

vent debris from accumulating, keeping both hinge points clean. This model offers standard features to make drivers’ jobs easier: a hydraulic pop-up ramp connecting the deck to the gooseneck, a foot hole and grab handle on each side of the gooseneck for climbing onto the deck, an 18,000-lb. (8,164 kg) hydraulic winch with a two-function wireless remote and an air kick-out for hauling inoperable equipment or static loads. Raised Apitong and quarter-in. self-cleaning star traction decking, D-ring stake pockets, chain slots and a work light add convenience.

The XL 80 Power Tail is available in two lengths: 48 or 53 ft. (14.6 or 16.1 m). There are customized options to choose from such as an 8- or 10-function remote, workaround pulley for winch cable, steel tread plate on the flip tail and pop-up ramp, and various winches to customize the trailer for your specific needs. For more information, visit www.xlspecializedtrailer.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

McNeilus Truck Touts Advanced FLEX Control System McNeilus Truck & Manufacturing Inc. featured its advanced FLEX Controls System at ConExpo 2017. “Our new FLEX Controls provide an unprecedented level of performance and accuracy,” said Brad Nelson, president, McNeilus Truck & Manufacturing Inc., and senior vice president of Oshkosh Corporation’s Commercial Segment. “They allow better, more precise mixing and improve monitoring and operator assurance — all in a flexible, cost-effective package.” McNeilus FLEX Controls are one of the most advanced control systems in the industry, with flexibility to meet any concrete producer’s needs, according to the manufacturer. FLEX Controls are the “brains of the operation.” They are the new nerve center that meets the demands of today’s job requirements and seamless upgrades for the demands of tomorrow. Whether it’s simple reliability or complex precision, the flexible system enables users to add or take away functionality to meet individual needs, the manufacturer said. The system consolidates complete mixer monitoring onto one screen. With the new control system, users have better control and less variability in loading, mixing and deliv-

ering. The new smooth drum stop technology offers the smoother transitions from charge to discharge and stop/start. The FLEX Controls system is designed for continuous innovation, building in future upgrade capability to meet evolving customer needs.

“The new McNeilus FLEX Controls is a system that I have worked closely on with our development team. The key to this system is the flexibility,” said Tom Harris, vice president of concrete mixers of McNeilus Truck & Manufacturing Inc. “You can configure a simple system for one producer and

an advanced system for technology driven producers.” For more information, visit www.mcneiluscompanies.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

FLEX Controls consolidates complete mixer monitoring onto one screen. With the new control system, users have better control and less variability in loading, mixing and delivering.

Page 54 • May 6, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

1 LEFT

NEW RAM 4500 CREW CAB 4X4 CAB & CHASSIS 84 C/A

NEW RAM 5500 STD CAB & CHASSIS 84 C/A

CUMMINS DIESEL, RAM 4500 CREW CAB 4X4 CAB & CHASSIS 84 C/A PTO, POWER WINDOWS, LOCKS, B/U CAMERA, MAX TOW PACKAGE, DUAL FUEL TANKS, H/O ELECTRICAL, STOCK# 16564

CUMMINS DIESEL, PTO, H/O ELECTRICAL. HD SUSPENSION, POWER WINDOWS, POWER LOCKS POLISHED STAINLESS RUGBY 11’6 DUMP, PULL PLATE AND HITCH PACKAGE, STAINLESS TOOL BOX ABD STAINLESS SIMULATORS & MORE, STOCK# 17187

MSRP $58,090 / GOTTA GO PRICING $48,601

MSRP $71,985 / GOTTA GO PRICING $62,875

#7 RAM IN LER C U TR K DEA SINESS U B ER V DEN CENTER

WE DELIVER! Little Falls, MN • Dick Reineck 320-631-3230 • 800-847-2502 www.brandlmotors.com

Mack Proprietary 16,000-Lb. Front Axle Available for Order Mack Trucks’ proprietary 16,000-lb. (7,257 kg) front axle is now available for order on the Mack Pinnacle axle back and axle forward models. Built to bear the heavier loads commonly found in Canada, the 16,000-lb. Mack FXL front axle enables carriers to transport more cargo, improving productivity and efficiency. The 16,000-lb. front axle also is available in the United States. “Our 16,000-lb. front axle improves performance with the same legendary durability and reliability that Mack pioneered,” said Roy Horton, director of product strategy of Mack Trucks. “It’s designed significantly heavier so that our customers can improve their efficiency by transporting more payload at one time.” Mack axles, engineered to work seamlessly with Mack MP engines and Mack transmissions as part of Mack’s integrated powertrain, offer enhanced strength and improved fuel efficiency. Developed to provide a stable and smooth ride under demanding loads, the 16,000-lb. Mack FXL axle also simplifies maintenance, improving uptime for customers. Mack Pinnacle models are built to handle the toughest challenges, delivering great power, fuel efficiency and maneuverability. The addition of the 16,000 lb.front axle for heavy loads further maximizes a customer’s bottom line, according to the manufacturer. All Mack Pinnacle models equipped with Mack MP engines come standard with Mack GuardDog Connect, a telematics-based solution providing proactive vehicle monitoring and maintenance management. Combined with Mack ASIST and Mack’s live OneCall uptime agents, GuardDog Connect delivers the right mix of people and technology to provide decision-critical information maximizing customer uptime. Mack Trucks also recently launched Mack Over The Air (OTA), enabling customers to update software without disrupting their schedules, increasing operational efficiency and uptime. For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Mack Trucks’ proprietary 16,000-lb. (7,257 kg) front axle is now available for order on the Mack Pinnacle axle back and axle forward models. Built to bear the heavier loads commonly found in Canada, the 16,000-lb. Mack FXL front axle enables carriers to transport more cargo, improving productivity and efficiency.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 6, 2017 • Page 55

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

K.C. Bobcat

McCann

2209 SW US Hwy. 40 Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001 www.kcbobcat.com

Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 • Fax: 812-421-1036 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 • Fax: 812-299-3687 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 • Fax: 618- 242-9161 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 • Fax: 270-781-0907 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 • Fax: 615-641-1108 www.diamondequipment.com

Ziegler CAT

RDO Equipment Co.

8000 County Road 101 East Shakopee, MN 55379 800-352-2812

Burnsville, MN 952-890-8880 Rochester, MN 507-282-8888 North Mankato. MN 506-387-1836 Marshall, MN 507-532-0994 Sauk Rapids, MN 320-259-6222 Moorhead, MN 701-526-2200 Bismarck, ND 701-223-5798 Dickinson, ND 701-483-0115 Grand Forks, ND 701-772-4842 Minot, ND 701-852-3962 Williston, ND 701-577-0736 Aberdeen, SD 605-225-6772 Sioux Falls, SD 605-336-2730 Rapid City, SD 605-348-1566 www.rdoequipment.com

13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Page 56 • May 6, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

4 DIESEL OIL CHANGES

$385.

FEDERAL DOT VEHICLE INSPECTION

$98.

FOR SYSTEMS 7 QT OR LESS. INCLUDES OIL, FILTER, DISPOSAL, AND MULTIPOINT INSPECTION.

IN THE BUSINESS OF DOING BUSINESS? NOW NEWLY AVAILABLE HERE AT FURY DODGE RAM OF LAKE ELMO FOR YOUR COMPLIANCE NEEDS FOR MINNESOTA AND WISCONSIN.

RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE INFORMATION.

5550 SERIES TRUCKS AND SMALLER. NOT AVAILABLE FOR AIR BRAKE APPLICATIONS. OTHER RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE DETAILS.

Jeff Leonard or Dale Coggin Service Department

Fury Dodge Ram of Lake Elmo, Minnesota 651-256-8125 • Visit us at furymotors.com

Offering More Value...

Felling Makes Enhancements to Its Pan Series Trailers

Felling Trailers Inc. has made enhancements to its Pan Series model line of trailers. The Pan Series trailers have always been known for offering one of the lowest load angles for a ramp trailer in the industry. In Felling’s continuing effort to offer more value to its customers, the company made the following features standard on the entire product line: increasing the ramp width from 14 to 16 in. (35.5 to 40.6 cm); standard dual tail lights; and standard with EZ Lube Hubs. For more information, call 1/800-245.2809 or visit www.felling.com.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 6, 2017 • Page 57

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

Stack up and save with the new 2017 Business Choice Program! The 2017 Business Choice Program is geared toward providing business owners the best value on vehicles that run your business. Purchase or lease an eligible Chevrolet vehicle and get the new 2-year/24,000-Mile Schedules Maintenance Program1 and stack on any of our Business Choice offers, like the Uplift Cash Allowance2 or the GM Accessory Cash Allowance,3 to save more. You can also add current retail offers to this equation to make it a deal you can’t pass up. Purchasers of 2014-2015 vehicles are eligible for the 2-year/30,000-mile Business Maintenance Program7 along with the Uplift Cash Allowance2 or the GM Accessory Cash Allowance.3 Learn more at gmfleet.com/business-choice-offers.

OFFERS

Page 58 • May 6, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Thunder Creek Equipment Introduces Combo Diesel/DEF Transfer Tank

AIS Construction Equipment Corporation www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

This combo tank provides 100 gal. (378.5 L) of diesel and 18 gal. (68 L) of DEF capacity that fits seamlessly into the bed of pickup trucks (half-ton and larger — including goosenecks and fifth wheels) with both pumping systems concealed within its structure — no elements protrude from the tank.

Thunder Creek Equipment introduced a combination diesel and diesel exhaust fluid (DEF) transfer tank for pickup trucks. This combo tank provides 100 gal. (378.5 L) of diesel and 18 gal. (68 L) of DEF capacity that fits seamlessly into the bed of pickup trucks (half-ton and larger — including goosenecks and fifth wheels) with both pumping systems concealed within its structure — no elements protrude from the tank. The sleek design ensures excellent rear visibility by taking up no more than half of the rear window, according to the manufacturer. “We know that many equipment owners are still in the early stages of determining the best way to handle DEF in the field,” said Luke Van Wyk, national sales manager and owner, Thunder Creek Equipment. “This combination tank — which takes up a similar footprint as today’s pickup truck tanks — provides owners with an efficient and contained way of transporting both diesel and DEF out to the field in a design they are familiar with.” The combo tank features a 100-gal. steel diesel tank, and an 18-gal. polyurethane DEF tank that can be substituted with a tank and pumping system for engine or hydraulic oil. Both fill nozzles (available in automatic or

“This combination tank — which takes up a similar footprint as today’s pickup truck tanks — provides owners with an efficient and contained way of transporting both diesel and DEF out to the field in a design they are familiar with.” Luke Van Wyk Thunder Creek Equipment

manual) are located on the driver side of the truck and extend out 10 ft. (3 m) from the tank. An optional thermostatically controlled DEF heating system is available for use in northern climates that ensures that the temperature of the DEF tank, pumps and hoses doesn’t dip below 25F. The 12V Webasto heating system is entirely self-contained and runs off diesel from the tank. Diesel is pumped at 15 gal. (56.7 L) per minute (GPM) via an industrialgrade 12V pump, while DEF is pumped at up to 10 gpm (37.8 Lpm).

Thunder Creek’s proprietary 2-in-1 DEF pumping solution, which pumps DEF in and out of the tank via a closed system to ensure fluid quality, also is available as an option. The entire transfer tank and all of its components are concealed within a lockable, weather-sealed enclosure, and comes with diamond plate aluminum doors as an option. For more information, visit ThunderCreek.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750

Ditch Witch of North Dakota www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

Mankato, MN • 800-321-PLUS

www.toppersplus.com 1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 6, 2017 • Page 59

www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949 3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

Page 60 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DELIVERING SUCCESS TOGETHER

Custom Truck & Equipment (RT-T-HC/CC-AT-BT) 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

Authorized Terex Cranes Distributors © Terex Cranes 2017

•

Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.

Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running. Contact our distributors and find out how we can help improve your bottom line.

For Your Local Terex Dealer, Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 61

DOOSAN. AN POWERFUL W SOLUTIONS. UTIONS At Doosan, we do more than engineer products. We engineer solutions. Robust compressors that weather her the harshest conditions. Generators and light towers that match innovation with efficiency. Unrivaled service and support, day or night. That’s a the way we’ve operated for over 100 years, and the way we’ll do business for dec d ades to come.

AIR COMPRESSORS / GENERATORS / LIGHT TOWERS Aspen Equipment Co. www.aspenequipment.com 9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525 Omaha, NE (402) 894-9300

Roland Machinery Co. www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399

East Peoria, IL (309) 694-3764 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151 Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710

DoosanPortablePower.com | 800.633.5206

Schofield, WI (715) 355-9898 Escanaba, MI (906) 786-6920

Central Power Systems & Services www.cpower.com 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231 Great Bend, KS (620) 792-1361

Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

Page 62 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu America Corp. Introduces Tier IV PC290LL-11 Log Loader Komatsu America Corp.’s PC290LL-11 log loader features a 196 net hp, EPA Tier IV Final, Komatsu SAA6D107E-3 engine. The PC290LL-11 is available in either a 40 ft. (12 m) reach, live heel log loader, or a 34 ft. (10 m) reach, road builder configuration, for high performance in demanding logging applications. Log loader and road builder operating weights are 89,730 lb. (40,700 kg) and 82,230 lb. (37,300 kg), respectively. Other new or improved PC290LL11 features include a high capacity cooling system, high drawbar pull, additional forestry guarding, narrower, 11 ft. 5 in. (3.5 m) transport width, more comfortable operator controls, all LED lighting and KOMTRAX 5.0 technology. Performance and Productivity The PC290LL-11 features a new high capacity cooling system, utilizing wide core cooling fins (3 mm vs. the standard core’s 1.75 mm fin spacing) for the radiator, hydraulic oil cooler, and charge air cooler, providing improved performance and reliability. The heavy-duty ¼ in. (.6 cm) thick cooler air intake door is wafflescreened and sealed to reduce debris accumulation and cleaning time. Powerful PC360-class final drives generate 64,250 lbs. of drawbar pull for excellent shovel logging and rough terrain performance. A rugged PC390class swing motor and drive delivers high swing torque for superior log loading and road building performance, according to the manufacturer. Komatsu’s standard, robust forestryguarding package now includes an enhanced right hand corner guard system. The guard system now has a fully protected LED light, plus a rugged tree deflector with a “hockey stick” design that can be removed or reverse-mounted for transport. Along with the tree deflector, the track frame steps can also be removed or reverse-mounted to achieve an 11 ft. 5 in. transport width, which meets most local regulations and reduces the need for special transport permits. Operator Comfort & Convenience The modern Komatsu ROPS/OPS/FOPS/TOPS/FOG/WCB/ Oregon OSHA certified forestry cab

CONTINENTAL EQUIPMENT CORP.

ROAD MACHINERY & SUPPLIES CO.

www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY

The Komatsu PC290LL-11 has 196 net hp and is available in either a 40 ft. (12 m) reach, live heel log loader or a 34 ft. (10 m) reach, road builder configuration.

provides a comfortable working environment. The cab is available with a 48 in. (122 cm) hydraulic tilt or a 7 in. (17.7 cm) fixed cab riser. All cab and work equipment lights are now LED and provide brilliant illumination in low light conditions for increased productivity. Inside the cab, new, more comfortable, lower profile pilot proportional control (PPC) levers are used to control the boom, arm and heel functions. New, thumb-actuated, electro-proportional control (EPC) sliding buttons provide the operator with smoother and more precise attachment control of the grapple, bucket thumb, etc. An updated, large, 7 in. LCD monitor has a new split-display mode, showing both a rear camera view and key machine-gauge data at the same time. KOMTRAX Level 5 technology feeds the operator

machine data, such as fuel and diesel exhaust fluid (DEF) levels, Komatsu diesel particulate filter (DPF), regeneration status, location, cautions and maintenance alert information. Komatsu CARE The PC290LL-11, whether rented, leased or purchased, is covered by the Komatsu CARE program for the first three years or 2,000 hours, whichever comes first. Komatsu CARE includes scheduled factory maintenance, a 50point inspection at each service and up to two complimentary Komatsu DPF exchanges and up to two DEF tank flushes in the first five years. For more information, visit www.komatsuamerica.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

BERRY TRACTOR AND EQUIPMENT CO. www.berrytractor.com 930 S West St. Wichita, KS 67213 316/943-4246 1750 SW 41st St. Topkea, KS 66609 785/266-9509 3830 W Jones Ave Garden City, KS 67846 620/277-2290 2060 N West Bypass Springfield, MO 65803 417/831-2651

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 63

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898

GENERAL EQUIPMENT & SUPPLIES, INC. www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

Page 64 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 65

N’ IN A IN PLAY HE DIIRT TH

SSIN I NNCE CE

19 65 PUSHING THE LIMITS L OF CONSTR TRUCTION PERFORMANCE ORMANCE Ready to work, Mustang ang Compact Equipmentt comes standard with the he right power needed to tackle the biggest ggest tasks. Building itss first skid-steer in 1965, 5, Mustang has ppushed the limits of durability ability and high perform mance, setting new industr stry standards.

G E N U I N E

™

P A R T S

CA ALL YOUR AREA REA MUSTANG A DEALER R TODAY! Y STAR EQUIPMENT LT D .

REED COMPANY, LLC 2738 FAUNA ROAD LEBO, KS 66856 (620) 256-6609 FAX: (620) 256-0288 JUNCTION US 24 & 99 HWY WAMEGO, KS 66547 (785) 456-7333 FAX: (785) 456-6714 WWW.REEDSALES.COM

www.m mustangmfg. com

STAR EQUIPMENT LTD. 1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 FAX: (515) 283-0295 (800) 369-2215

2950 6TH STREET SW CEDAR RAPIDS, IA 52404 (319) 365-5139 FAX: (319) 365-6726 (800) 728-5139

2625 W. AIRLINE HWY. WATERLOO, IA 50703 (319) 236-6830 FAX: (319) 236-6834 (800) 791-9249

2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 FAX: (515) 233-9505 (866) 856-2312

WWW.STAREQUIP.COM

TOP NOTCH EQUIPMENT, INC. 5505 HIGHWAY 169 N. PLYMOUTH, MN 55442 (888) 824-6559 (763) 398-0079 FAX: (763) 551-7916 WWW.TOPNOTCHEQUIPMENT.COM

Page 66 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

I-39/90 Traffic Causes Significant Congestion, Safety Concerns WISDOT from page 1

and Madison, continue to increase as travel volume grows. In 2011, the Interstate carried an average of more than 50,000 vehicles perday, with traffic volumes exceeding 70,000 vehicles a day during the summer’s tourism months. Traffic modeling predicts these volumes to increase to upwards of 80,000 vehicles per-day by 2040. Of these amounts, truck traffic accounts for about 30 percent of vehicles on this stretch of Interstate, which places even greater strain on traffic and road infrastructure. These volumes have caused significant congestion and safety concerns. There was an average of 1,876 crashes along this stretch of Interstate for the four-year period of 2012 to 2015. Of these, 591 resulted in injuries and 11 in fatalities. “Without improvements, these crash trends and delays, due to congestion, will continue to get worse,” said Theisen. I-39/90 is one of the most important transportation corridors in Wisconsin. There are more than 10,900 businesses, employing more than 260,000 people, located in communities along the corridor. It’s also a major travel route for tourism as visitors enter Wisconsin to enjoy the great destinations across the state. “In 2012, Dane and Rock counties had an estimated $1.2 billion impact in terms of visitor expenditures from food, lodging, retail sales and tourist-related attractions in the communities along the Interstate,” said Theisen. This project is one of the largest highway projects undertaken in south-central Wisconsin. Due to its size, the overall corridor was divided into three segments — North, Central and South. Expanding the roadway allows more motorists to conveniently travel the area, increase economic activity in the entire region and provides new opportunities for growth in tourism and business development. Due to its importance, significant study, planning and design was completed prior to start of construction. This included studying traffic volumes and identifying traffic patterns, both on and near the Interstate. The findings allowed the project team to design interchanges that accommodated traffic patterns for each interchange. This led to incorporating roundabouts at some of the interchanges and also to the construction of the state’s first Diverging Diamond Interchange (DDI). “DDIs move traffic to the opposite side of the road within the interchange which allows for free flowing left turns onto the Interstate,” said Theisen. Two other locations along I-39/90 will be reconstructed utilizing the DDI design to

The Wisconsin Department of Transportation’s (WisDOT’s) $1.2 billion reconstruction and expansion of Interstate 39/90 in south-central Wisconsin is well under way.

accommodate interchange locations with predominantly left hand turns onto the Interstate. “Since being completed late last fall, the DDI has proven very effective,” said Theisen, who noted that DDIs also are being considered elsewhere across Wisconsin. The magnitude of reconstructing the Interstate created challenges such as upgrading alternate routes on nearby highways, efficiently managing traffic during construction and utilizing materials that would extend the life of the new roadway and bridge structures. Although recycled roof shingles have been incorporated in hot mix asphalt since 2010, the WIS 73 alternate route reconstruction project, between Edgerton and Deerfield, was one of three state approved pilot programs to use an even larger percentage of shingles as the binder. “Previously, only 25 percent of the binder (or asphalt cement) was allowed to be replaced with recycled roof shingle binder,” Theisen explains. “The pilot program allowed for up to 50 percent of the binder to be made from recycled shingles. This helps reduce material costs and reduces the amount of shingles being placed in landfills.” To crossover the Interstate, a majority of bridge structures along the I-39/90 corridor are single and multiple span prestressed concrete girder bridges with girder depths ranging from 36- to 72-in. (91 to 183 cm). All piers are multiple shafts supported on piling driven to capacity and the abutments are silltype supported on driven piles. “At several locations, we have incorporated mechanically stabilized earth (MSE)

walls to meet specific design and site constraints,” said Theisen. “Many of the bridge details have been standardized to minimize construction cost and design staff have incorporated minimal aesthetic enhancement details along the mainline structures.” The anticipated bridge construction timeframe ranges from four to six calendar months, and is predicated by maintenance of traffic requirements. “Our goal is to have bridge contracts awarded and under contract during April with construction to follow from late April/early May and have substantial completion with the bridge opening to traffic during early November,” said Theisen. WisDOT’s standard design life is 75 years for all types of structures. To meet this design life, the design team has incorporated the use of epoxy coated bar steel reinforcement for all structural elements and the use of High Performance Concrete (HPC) in the bridge deck, parapet and structural approach slabs for all mainline and interchange structures. A limited amount of stainless steel bar reinforcement is being used based upon a cost/benefit analysis by the department. The combination of epoxy coated bar steel reinforcement and HPC will achieve the desired design life. Stainless steel rebar is being used as the joint between the bridge deck and the structural approach slab since this joint is susceptible to higher levels of corrosion. The project team also incorporated design changes for innovation and efficiency. “Crews using cast-in-place concrete piling achieved a significant reduction in the amount of piling required which translates into a financial savings for the project,” said

Theisen. “Previous piling records from nearby locations are used to confirm the estimated piling type and length. We incorporated the mandatory or optional use of precast pier elements with the goal of reducing construction time and cost while minimizing traffic impacts to the traveling public.” Five of the overpass structures mandated the use of precast pier elements. The other structures allow for the optional use of precast pier elements. The contractors are allowed to pour the structural approach slab with the bridge deck to reduce the overall construction time for a structure. Where possible, a joint-less bridge design is being used to eliminate the need for expensive and high maintenance bearings and expansion joints. Temporary bridge widening to maintain two lanes of traffic when the Interstate goes bi-directional uses prestressed concrete girders versus structural steel to reduce overall construction cost and steel fabrication lead time. Standardization of bridge details has led to a reduction in construction time and overall cost. Plus, the use of precast concrete box culverts speeds construction time and reduces environmental impacts to stream crossings. The magnitude of this project has provided significant job opportunities. Hundreds of people have worked on the project to date and many of the contractors are hiring new staff to meet the project’s workload. Coordination also is a significant factor. Monthly roundtable planning meetings were held early in the preliminary design years to work out any questions or issues from the three consultant design teams. These meetings helped minimize last minute revisions and created a consistency in design for the entire corridor. Another important element was ensuring the pavements are designed for a 50-year life cycle. In Wisconsin, the initial service life for new concrete pavement is 25 years before a rehabilitation is required. After 25 years, improvements to the pavement are required at regular intervals of eight to 15 years, depending on the scope of rehabilitation. In addition to the three segments teams that manage their portions of the Interstate, a Corridor Management Team (CMT) was created and organized similar to a WisDOT region office with experts assigned to the various functions needed to move a project forward. “As challenges arise, the technical expert(s), such as utilities, real estate, survey, geotechnical, design, structures, etc., are called upon to recommend a solution to CMT management,” said Theisen. “One of our project’s goals is to have no surprises during construction.” see WISDOT page 89

Pages 67-82

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Contractor Adopts Pitbull to Help With Aggregates What’s in a name? In the case of Wells Excavators, it may not be what you think. The company, according to owner Jim Wells, neither digs wells nor sells excavators. Instead, the company is an excavating contractor. “I still occasionally get phone calls from people asking me to dig their well, and, at times, people wonder if we sell excavators,” Jim said of the company he founded in 1982. Wells Excavators began with the purchase of a small Kubota compact tractor to do some side jobs. Jim added a logging winch to the tractor and did some lot clearing. Some people took notice, the number of jobs grew, and before long, he purchased a 50 hp Kubota tractor loader backhoe and started tackling larger site work projects. Since then, the company has grown: Wells Excavators is regularly tackling residential and commercial site work projects as well as road Wells Excavators is regularly tackling residential and commercial site work building and design build projects for projects as well as road building and design build projects for septic systems septic systems and ponds. He also has and ponds. gotten involved in doing utility work When you run gravel all day there is a on hand to remove the processed materials. (water mains and the like) as well as lot of vibration and I did not feel that If you are processing with a box screener cell tower site work. many of these machines would hold up and one machine in the plant is simply idling The area of northern New 50 percent of the time, to me that is costly to continuous use.” Hampshire where Wells Excavators is Jim said that there are several box inefficiency.” located has largely become noted as a screeners on the market that would hold Jim decided that to make the investment vacation and recreational area. Home up under this type of work, but for his he was considering, the screening plant building on New Hampshire’s many pristine lakes has become very popular The Pitbull portable screening plant with convey- setup, he knew that he wanted a would need to have a conveying system to can process 1 cu. yd. (.76 cu m) of material machine with a stacker. remove product from the screening plant and and doing that type of site work takes a or under good conditions every 23 seconds. “It had come to me that by adding a eliminate the need for a second operator. contractor who is in tune with the variOver time, Jim saw the need and benefit stacker to a small screening plant the end “Without the conveyor, with our type of ous environmental needs and regulations to owning his own screening plant to work result would be a one operator spread,” he soil conditions, if we were feeding the that come with it, Jim explained. From his location in Colebrook, most of his gravel pit, but to make the investment, he said. “In the manner the traditional box screening plant with an excavator, we would his business has developed in the northern set in his mind a stringent criterion that the screeners work, mixed material is dropped need to be continuously running a three-yard New Hampshire, western Maine, and the screening plant would need to have for him into the hopper and oversized materials fall loader in order to keep up with the producto see the full benefit of ownership. from the top of the screen to the side of the tion.” Northeast Kingdom of Vermont. First, it had to be industrial grade. plant. The screened material falls through Jim’s final criteria was that whatever As his business has grown, Jim has had a “Over the years I have seen many portable the plant and piles up underneath it. After machine he purchased would need to be growing need to have ready access to aggregate materials, which led to him establishing compact screening plants and several of the running a few loads of mixed material into transportable by a tri-axle dump truck. “In the fall of 2015, I heard about the his own gravel pit in Colebrook. From this ones that have come on the market recently the hopper, you either need to stop feeding pit, he excavates materials as needed and were really made for a landscaper and not a the hopper and go remove the screened Pitbull screener, a portable screening plant from time to time, he brings in a material material producer,” he said. “The steel and materials from underneath the plant or you with a conveyor,” he said. “I contacted the processor to make screened loam or gravel. the construction were not particularly heavy. need to have a second machine and operator see PLANT page 74

Page 68 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Finkbiner to Offer KPI-JCI, Astec Mobile Screens Lines Kolberg-Pioneer Inc. (KPI), Johnson Crushers International (JCI) and Astec Mobile Screens have announced Finkbiner Equipment Company (FEC) as a new dealer of crushing and screening equipment. Finkbiner will market, sell and service KPI-JCI and Astec Mobile Screens products throughout the state of Illinois. “We are very excited to have Finkbiner join our strong distributor network,” said Ron Earl, vice president of sales and marketing. “Partnering with FEC will allow us to continue offering innovative, topof-the-line products to our customers, with the benefits of dedicated service and support teams.” Established in 1969, Finkbiner Equipment Company is headquartered in Burr Ridge, Ill., and opened an additional branch May 1 in East Peoria, Ill. FEC is an independent

heavy equipment distributor, offering earthmoving, material handling and concrete and asphalt paving equipment. Kolberg-Pioneer Inc., Johnson Crushers International Inc. and Astec Mobile Screens Inc. manufacture equipment for the aggregate, construction and recycling industries. The companies have the ability to engineer custom products. Kolberg Pioneer Inc. manufactures its products in Yankton, S.D.; Johnson Crushers International Inc. in Eugene, Ore.; and Astec Mobile Screens Inc. in Sterling, Ill. For more information, call 605/668-2524 or visit www.kpijci.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Kolberg-Pioneer Inc. (KPI), Johnson Crushers International (JCI) and Astec Mobile Screens have announced Finkbiner Equipment Company (FEC) as a new dealer of crushing and screening equipment.

IROCK’s TS-512 Offers Hassle-Free Setup, Portability IROCK’s TS-512 tracked screening plant gives small- to medium-sized producers a dependable and easy-to-use machine for sizing and sorting a wide range of materials, including aggregates, coal, concrete, gravel, limestone, sand and topsoil. IROCK Crushers designed the unit for fast and easy setup as well as hassle-free onsite mobility. The TS-512 screener features two highenergy, two-bearing decks; a 12- by 5-ft. (3.6 by 1.5 m) top deck and a bottom deck that is 10 ft. 4 in. by 5 ft. (3.1 by 1.5 m), giving pro-

ducers ample screening area of 112 sq. ft. (10.4 sq m). The interchangeable screen media gives producers versatility over end product size. The unit optimizes productivity with its 12cu.-yd. (9.1 cu m) hopper and 100-hp Cat Tier III engine that enables the screener to process as much as 400 tons (363 t) per hour of material. The TS-512’s three conveyors sort as many as three sizes of product into stockpiles 16 ft. 5 in. (5 m) high. The TS-512 is the tallest in the industry, which allows operators to put

IROCK’s two-deck TS-512 portable tracked screening plant offers hassle-free setup and portability.

more material under the belt before moving the screener from one stockpile to the next, according to the manufacturer. Users can set up and tear down the screen quickly and easily. Many components, such as the conveyors, are hydraulically powered so operators quickly and simply move them into place for production or fold them down for transportation. The TS-512 also features intuitive, easy-to-use controls to further enhance efficiency. IROCK built the TS-512 to withstand the

rigors of day-to-day use. It features a solid, heavy-duty steel chassis that provides ultimate durability on the site and during transportation. Customers can choose the standard tracked model that optimizes maneuverability around the job site or the wheeled version for fast and easy towing. Maintenance is simple with the TS-512’s easy-to-access engine compartment that provides generous room for repairing or replacing components. IROCK offers several additional features to customize the unit for specific applications. An optional remote-controlled livehead effectively sizes and loosens heavy, dirty and sticky debris from product before it enters the hopper. This expedites the screening process and boosts productivity. Users choose from the standard tethered remote or IROCK’s optional wireless remote for greater flexibility around the site. A crusher chute gives producers the option to directly feed material into the hopper without removing the tipping grid. A single shaft shredder is also available for proper topsoil screening. For more information, call 866/240-0201 or visit www.irockcrushers.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 6, 2017 • Page 69

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

Metso’s Lokotrack® LT106™ jaw crusher: Meeting your demands for high capacity with maximum efficiency That’s how we make the big difference, the Metso Way. Improve the efficiency and profitability of your crushing operation with the redesigned Lokotrack® LT106™ jaw plant. New features, including a radial side conveyor, high inertia flywheels, and an IC700™ process control system, ensure high productivity, user-friendly operation, and good mobility in tough crushing applications. The LT106 is also available with Metso’s Fleet Management technology, providing remote monitoring of functions, parameters, and location for more efficient operation.

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200

5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 70 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Peterson 4710B Grinder, 765 hours $555,000

Telestack 36-140 Telescopic, 4 hours $ 255,000

Neuenhauser Starscreener 3F, 284 hours $549,000

Telestack TC 424X, 513 hours $95,000

Edge TS 80, Approx. 200 hours $95,000

Terex Chieftain M1700S, 1642 Hours $ 165,000

Edge TS 65, Approx. 200 hours $85,000

Finlay 393, $39,000

Kolman 4X8 Screener 1437 Screener, $28,000

Mark III, 1528 hours $29,000

Commander 510, 11,419 hours $45000

Extec S6, 10,000 hours $125,000

www.aggcorp.net

844-224-4267 AGGCORP Serving: OHIO/MICHIGAN 22800 Lakeland Blvd. | Cleveland, Ohio 44132 917 S Search St. | St. John, Michigan 48879

info@aggcorp.net | www.aggcorp.net

www.powerscreen.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 6, 2017 • Page 71

A WIRTGEN GROUP COMPANY

POWERFUL PERFORMANCE. JUST TAKE YOUR PICK. MOBICAT MC 110 EVO

MC 110 R EVO I MC 110 Z EVO

EFFICIENT HIGH ACHIEVERS IN TWO VERSIONS. Whether you opt for the MC 110 EVO Z with its independent double-deck prescreen, or the R-version with its vibrating feeders and integrated slotted grate – the crushing unit with its elevated crushing jaw ensures optimal material feed and an impressively high crushing capacity of up to 330 t/h for both systems. Combined with their innovative and cost-effective diesel-directdrive concept and exceptional transportability, powerful performance is guaranteed. The MOBICAT MC 110 EVO.

www.kleemann.info

Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330 Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Page 72 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com Louisville, KY 502-491-4000

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

HOWELL TRACTOR & EQUIPMENT LLC

GIBSON MACHINERY LLC

www.howelltractor.com

www.gibson machinery.com

Gary, IN 219-810-6327

Cleveland, OH 440-439-4000

Peru, IL 800-342-6072

ROLAND MACHINERY CO. www.rolandmachinery.com Carterville, IL 618-985-3399

Franksville, WI 262-835-2710

East Peoria, IL 309-694-3764

DePere, WI 920-532-0165

Bridgeton, MO 314-291-1330

DeForest, WI 608-842-4151

Columbia, MO 573-814-0083

Eau Claire, WI 715-874-5400

Cape Girardeau, MO 573-334-5252

Schofield, WI 715-355-9898

Palmyra, MO 573-769-2056

Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO. www.vlpco.com Kansas City, MO 800-878-9290 Joplin, MO 800-878-8223 Brookline Station, MO 800-955-2729 Wichita, KS 800-878-3346 Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com Savage, MN 800-888-9515

Milan, IL 800-633-9114

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Sioux City, IA 800-633-9104

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 6, 2017 • Page 73

6750 Millbrook Rd. • Remus, MI 49340 • 1-800-952-0178 FIND US ONLINE WWW.BANDITCHIPPERS.COM .

Bandit Buuilds More Thaan Machines... Bandit Industries has based b its reputaation on a simplee truth – build them strong and stand behind our customers. And thaat’s what we’ve done evvery stepp of the wayy. Every Banndit® machine uses the highhest quality steel and is construucted by specialized teams to stand tand up to the toughest jobs. Tha T at’s why more professionals trust t a Bandit for their toughest jobs. And every machine is backked by unbeatable factory suppport and an extensive dealer network. twork. When it comes to yourr business, Bandit Industries doesn’t oesn’t just build machines. See how Bandit can build your bottom line. Contact your local authorized Bandit dealer today or visit www.banditchippers.ccom to learn more! LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3633 Fax: 847-678-7570

Wauconda, IL 847-526-4255

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

West Chicago, IL 630-293-0606

www.atlasbobcat.com

Yorkville, IL 630-553-0150

1200 East Highway 13 Burnsville, MN 55337 952-894-0894 877-262-2284

588 Outpost Circle Hudson, WI 54016 715-531-0801 866-268-2418

3101 Spruce St. Little Canada, MN 55117 651-407-3727 877-331-0295

www.tristatebobcat.com

7800 Broadview Rd. Parma, OH 44134 440-340-3001

535 N. Hwy Drive Fenton, MO 60326 636-349-1141

www.kandksupply.com 3218 Marshall Dr. Amelia, OH 45102 513-685-0808 www.buckeyeequipmentsales.com

Ashland, KY 606-928-3477

Cross Lanes, WV 304-204-1818

Norton, WV 304-636-6421

Cowen, WV 304-226-3299

Pleasant Valley (Fairmont), WV 304-534-5454

Pikeville, KY 606-432-0321

Beaver, WV 304-255-1525

www.lec1.com

Page 74 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Pitbull’s Plant Meets All Criteria for Wells Excavators PLANT from page 67

One of the most important features of the 3400XT is its standard width of 8 ft. 4 in. (2.53 m), making it within the legal transport width in any country, no matter what engine is used. This model accommodates engines from 540 to 800 horsepower (402 to 596 kW).

Morbark Introduces New Versatile 3400XT Wood Hog Horizontal Grinder Morbark LLC, a manufacturer of forestry, biomass, tree care, sawmill, and wood recycling equipment, debuted the 3400XT Wood Hog horizontal grinder. “Morbark listened closely to customer feedback while developing the design for the 3400XT,” said Michael Stanton, Morbark director of industrial sales. “The result is that we were able to provide the features our customers want and the versatility they need, while staying true to our proven technology.” One of the most important features of the 3400XT is its standard width of 8 ft. 4 in. (2.53 m), making it within the legal transport width in any country, no matter what engine is used. This model accommodates engines from 540 to 800 hp (402 to 596 kW), so it is ideal for a broad range of applications in a wide variety of markets worldwide. Like all of Morbark Wood Hog models, the 3400XT also is available with electric power. “The size of the 3400XT allows the same model, using a broad range of engines, to be configured for multiple applications and global markets without additional design considerations,” said Stanton. New Operator-Friendly Features Customer feedback also steered Morbark towards creating more operator-friendly features on the Wood Hog. Key among these are the design of the

infeed bed and the maintenance platform. The infeed bed is an additional 24 in. (60.96 cm) longer with sloped sides. This configuration improves operator sight lines for more efficient loading of material. Standard on the 3400XT is a removable infeed chain return floor, which allows excess material to fall away to minimize the wear on the floor, bed chain and inserts, particularly useful in landclearing or other applications with dirty material. The variable-speed infeed system consists of one 34-in. (86.36 cm) diameter top compression feed roll; a direct-driven internal planetary drive with no chains and sprockets for lower maintenance, more torque and better durability; and four strands of WDH120 chain in a staggered configuration. When maintenance is required, it’ll be quicker and easier to perform on the extended platform. The area between the hood and the engine has been reconfigured to provide an additional 12 in. (30.48 cm) of working space, for better access to components for general maintenance or to change screens. Other Key Features Morbark’s driveline protection system is standard on all Wood Hog models. The externally adjustable, breakaway torque limiter helps to protect the driveline and hammermill from catastrophic damage caused by contaminants.

The 3400XT is available with either Strickland or Cat undercarriage options. While the first unit built is a tracked unit, this model can be manufactured in a trailer or stationary unit as well (3400X). The remote-mounted radiator and oil cooler have independent reversing fans. The 3400XT is equipped with the Morbark integrated control system — or MICS. The ultimate diagnostics tool and control system, this allows the operator to automatically adjust feed rates and monitor pressures and feed wheel position to maximize production and engine efficiency. New smart device apps allow you to connect to your machine using your phone or tablet’s Bluetooth or allow you to connect your machine directly to Morbark, so Morbark personnel will be able to view and edit your machine’s settings and program or send you updated programming. Other standard features include an 11-hp (8.2 kW) air compressor for general maintenance and changing inserts; the self-contained rod puller for changing rods in the hammermill; and a magnetized end pulley with collecting slide tray for removal of ferrous metals. For more information, visit www.morbark.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

manufacturer and they pointed me to their website, which included a video of the Pitbull screener at work. He watched the video on Pitbull’s website and could not believe what he was seeing. “Based on the video, I knew that it met some of my criteria, but a closer inspection would be necessary.” Jim contacted Lance Conley, Pitbull’s master distributor, and found him to be very knowledgeable — and he was a New Hampshire native. “At this point, 2015 was nearing an end, tax season was approaching, and it was time to make a decision,” Jim said. “The people at Pitbull offered to bring a machine out for me to demo, but I decided that I would like to take a look at their facility first, so I made a trip to western Pennsylvania to check out the factory. I was told ahead of time that the plant was actually shut down for the holidays, but to my surprise when I arrived I was greeted by the owner of the company, its production manager and their master distributor. They showed me their fabrication facility and it quickly became obvious that this was a state-of-the-art steel fabrication plant and these people knew what they were doing. I walked from station to station down the production line and could see first-hand how the machines were built. The Pitbull was manufactured from heavy high quality steel and that steel is properly reinforced at all of the stress points. It was very rugged looking and I could tell that it was built to last.” Jim added that he saw a well-engineered heavy-duty hydraulic conveying system that looked more than capable of keeping up with the screening plants’ production. The plant appeared to meet all of his criteria, including mobility. “Pitbull offered to let me try out the plant and make some product with the agreement that if the machine did not meet my expectations and I chose not to buy it, I would pay nothing except the trucking to get it to our site and back,” he said. “As advertised, the Pitbull processed an impressive amount of material, just like Lance told me it would. After we demoed the Pitbull there was no question it was staying in New Hampshire. From our own production testing, we have found when we fed it with one of our 1 cubic yard excavators we can process a bucket every 23 seconds. Under good conditions, we have been able to process 1,800 yards of material in a twelve-hour day; that’s 150 yards per hour. The conveying system can make for a one-operator, one-machine process. We’ll often run 2 machines when processing, but if I have a man with some idle time during the week I can send him to the pit and process loam or gravel alone.” Wells Excavators has put approximately 600 hours on the Pitbull plant with absolutely no downtime other than maintenance, according to Jim. “At one point we did change out the screens to make different sized product and that was no more than a half hour process.” For more information on Pitbull screener, visit www.pitbullscreeners.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide â€¢ Recycling Section â€¢ www.constructionequipmentguide.com â€¢ May 6, 2017 â€¢ Page 75

CRUSHING

MA ATERIAL TERIAL HANDLING

SCREENING

TRACKS

WASHING W ASHING & CLASSIFYING

. XU

V 6'

6LR [

6WHSNH &W Traverse, MI 49 685 231- 943 - 3700 )D[

3RQWLDF 7UDLO 1HZ +XGVRQ 0, 248 - 356 - 5200 )D[

The comple ete source for equipmen nt in the aggregate, cons struction and recycling industries. Â® Offering indu ustry-leading brands such as s the Pioneer Jaw Crusher, Kodiak K Plus Cone Crusher, SuperStackerÂ® Â® Â® Â® Extendable Stacker S , ProSizer Mobile Sc creening Plant, Combo Screen, e Vari-Vibe a High-Frequen ncy Screen, Â® Duo-Vibe Hiigh-Frequency Screen, Serie es 9000 equipment, Fast Tra rax, Global Track and FastPack. ck.

www.kpijci.com

Page 76 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661 Fax: 502/732-8355

ILLINOIS TRUCK & EQUIPMENT www.iltruck.com 320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486

HOWELL TRACTOR AND EQUIPMENT www.howelltractor.com 480 Blaine St. Gary, IN 46406 219-810-6327 Fax: 219-977-6395 2770 May Rd. Peru, IL 61354 815-224-3003 Fax: 815-224-2538

HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411

PER ERFORMA O ANC OR CE UND DER R PRE ESS SSURE E Since 1942, Allied® hydr d aulic attachments ha ave consistently stepped up to meet challenges fro om contractor t s and municipalities who need to rent stro onger equipmen uipment with more e reliabili e ty and operating efficiency. Ourr Rammer® and Allied hydr d aulic hammer mers, as we ell as our Ho-P Pac® and Skid-Pa ac® compactors o s, are designed to actua ally verify e and improve your carrier rrier ROI decisions decisions. Proving v again and again that nobody dy kno knows how to o deliver e hydr d aulic produc o tivity under prressure e like Allied. Fo or de etails, visit an Allied distribut utor or call 800-321-104 46.

TH HERE’’S S NO SUBS STITUTE FOR E EXP PERIENCE ER RIENCE

ALLIEDCP.com c | 800.321.1046

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 6, 2017 • Page 77

THIS IS HOW WE CRUSH EVERY JOB, EVERY DAAY! Y!

Screen Machine products are better by design, by manufacture and by performance: • 50+ years in business • American-Made in Columbus, Ohio, USA • Assembled with US-made Grade 80 steel — the strongest g and most durable available! • Patented innovation available nowhere ere else

For your crushing and screening needs, choose the best — Screen Machine — and CRUSH EVER RY Y JOB! Select Dealer Opportunities Avvailable

American-Made Innovation Since 1966 800 837 3344 800-837-3344

7740-927-3464 40 927 34644 40-927-3464

email@screenmachine.com email@screenmachine com

Learn more more at www www.screenmachine.com screenmachine com

Page 78 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CEMCO Inc.’s Compact Turbo 54 VSI Delivers Consistent Material Output The Turbo 54 features a single-drive motor with input hp capabilities up to 250. The compact machine weighs 11,000 lbs. (4,989 kg) and produces throughputs as high as 125 tph (113 t). Bandit’s Color Max coloring system sprays color directly to The Beast’s cuttermill, which thoroughly coats material during processing.

Bandit Color Max Coloring System Now Available CEMCO Inc.’s Turbo 54 VSI crusher is an efficient, highly productive vertical shaft impact crusher capable of processing a variety of aggregate materials and industrial minerals. The Turbo 54 offers a mid-sized option powerful enough to process materials as large as 2 in. (5 cm) wide into a uniform, cubical, crushed, high-quality product. Fully customizable, from internal components to portable or stationary configuration, the Turbo 54 is ideal for multiple industries including aggregates, energy production, mining and recycling, according to the manufacturer. The Turbo 54 features a single-drive motor with input hp capabilities up to 250. The compact machine weighs 11,000 lbs. (4,989 kg) and produces throughputs as high as 125 tph (113 t). Combining advanced internal components with the principles of centrifugal force, the Turbo 54 crusher offers efficient, economical operation. Material enters through the wear-resistant, adjustable feed tube at the top of the crusher and drops onto an impeller table or closed rotor, depending on internal configuration. Revolving at a rate of 500 to 1,850 prm, centrifugal force directs the material from the impellor and casts it at speeds as fast as 200 fps against a stationary, abrasive resistant anvil. The material shatters on natural impact points, resulting in uniform, cube-shaped material with mini-

mal slivered, “slabby” product. Heavyduty, self-aligning spherical roller bearings enable the unit to handle dynamic loads of up to 114,000 lbs. (51,710 kg). The Turbo 54’s final product size is controlled by the combination of rotor size and type, rotor speed and other configurations, all determined by each individual customer’s needs. Internal configuration options can be adjusted to modify product output, depending on the customer’s application and desired material. Specifically designed for highly abrasive materials, the optional SuperChipper rotor and Anvil Ring combination is ideal for customers processing material such as basalt, cement clinker, glass, abrasive quarry rock and granite. Alternatively, crushers can be equipped with a Shoe Table rotor and Rockshelf anvil for medium- to lowabrasion material. Additional combination options are available, providing further customization options for various materials and customer expectations. By producing a consistent, ideally shaped product, the Turbo 54 ensures higher production of saleable material with less waste. Not only is this more efficient and economical, it’s crucial in meeting ever-changing state DOT specifications. Cubed fines provide stronger asphalt in comparison to slivered or elongated material, according to the manufacturer.

The Turbo 54 has been designed for maximum uptime and longevity, with minimal maintenance requirements. The unit’s upper and lower double-row, spherical-bearing pedestal system offers a long operational life to CEMCO’s customized lubrication system. Designed to maintain the proper quantity of clean, cool oil on the bearings, the system reduces maintenance and repairs while increasing longevity. Furthermore, Turbo 54 VSI crushers are equipped with a hydraulic lid lifter and Camlock system to provide quick internal access for easy routine inspection and maintenance. For added convenience, the Turbo 54 can be ordered as a truck-mounted portable unit. In addition to portability, the Turbo 54 is available with options such as a water flush system, designed for wet or sticky material, dust control systems and automation software. CEMCO now provides VSI crushing equipment in more than 29 nations to the majority of the world’s largest producers and green-friendly companies. Its complete line of VSI crushers ranges from the Turbo 35 to the Turbo 175, and is available in electric, stationary and portable options. For more information, call 505/8641200 or visit www.cemcoturbo.com.

Bandit’s Color Max coloring system sprays color directly to The Beast’s cuttermill, which thoroughly coats material during processing. “This system takes full advantage of the high-production capabilities of The Beast, distributing color throughout the mulch as it’s broken down,” said Jason Morey, Bandit Industries sales manager. “Because color is applied to the cuttermill, coverage on the product is distributed evenly while also being efficient with the colorant. The Beast using the Color Max system can easily produce 35 percent more colored mulch per hour.”

“The Beast is already known around the world for producing the highest quality mulch. With the Color Max system you’ll maximize profit on your waste wood even further.”

Jason Morey Company

The Color Max system requires less colorant and water to create the rich, evenly colored landscape mulch that’s always in demand. By applying color to the cuttermill, material stays in better contact with color to literally produce more colored mulch with less colorant. On average, the Color Max system uses 25 percent less color and 30 percent less water, according to the manufacturer. “The Beast is already known around the world for producing the highest quality mulch. With the Color Max system you’ll maximize profit on your waste wood even further,” Morey said. The Color Max system is available as an option on all models in The Beast lineup. For more information, call 800/952-0178 or visit (This story also can be found on www.banditchippers.com.

Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 6, 2017 • Page 79

Illinois

Indiana

Minnesota

Michigan & Ohio

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Theco, Inc.

AGGCORP

7144 N. Harlem Ave.

255 N. Hetzler Court

5470 Quam Ave. NE

22800 Lakeland Blvd.

Chicago, IL 60631

Angola, IN 46703

St. Michael, MN 55376

Cleveland, OH 44132

midwestcrushandscreen@gmail.com

sales@powerscreenindiana.com

www.thecoinc.com

www.aggcorp.net

847.271.5027

260.665.5816 • 800.843.4277

800.776.0335

614.309.6854

Page 80 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Brandeis Machinery & Supply Co. Evansville, IN (812) 425-4491 Ft. Wayne, IN (260) 489- 4551

www.brandeismachinery.com Lexington, KY Indianapolis, IN (859) 259-3456 (317) 872-8410 Louisville, KY Corbin, KY (502) 491-4000 (606) 528-3700

Paducah, KY (270) 444-8390 Stanville, KY (606) 478-9201

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 6, 2017 • Page 81

GET A HAND DLE ON OPERAT ATING COSTS Penn Jersey Machinery

Terex® Fuchs Material Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® ere Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus s compettiti itive material handl dlers

Deptford, NJ 856-227-6400

Frenchtown, NJ 908-824-4200 HAYDEN MURPHY Lionville, P PA A www.hayden-murphy.com 610-363-9200

9301 E. Bloomington Fwy Minneapolis, MN 55420 Staten Island, NY 952-884-2301 • 800-352-2757 718-4 718 448 4952-884-2293 8-24 2444 44 Fax:

The Tere e x Fuchs Tel e ematics System for real time fleet and equipment metrics to manage it all Plus you can always rely on your local Terex Fuchs distributor to keep your material handlers operating at peak efficiency, with Tere e x certified parts and trained service technicians. For more information on Terex Fuchs material handlers, contact your local Terex Fuchs distributor or visit us at terex.com/construc ction

Chadwick-Baross Chelmsford, MA 800-804-0775

Bangor, ME 800-698-4838 COMPANY WRENCH www.companywrench.com Caribou, ME 800-270-2547

4805 Scooby Lane NW Carroll, OH 43112 Westbrook, W estbrook, M ME 866-262-4181 • Fax: 740-687-9130

800-262-5 800 262-5714 714

Cleveland Branch 525 Golden Oak Pkwy Concord, H 44146 Oakwood Village, N OH 440-439-4567 • Fax: 440-439-1789 603-224-4 063 Piketon Ehrbar Branch Edward Inc. 3668 US Route 23 South

Yonk oPiketown, ers, NY OH 91740-289-3294 4-738-5100

Cincinnati Branch Holbrook, NY 3120 S. Verity Pkwy. 631-563-7 00 Middletown, OH645044 513-649-8105 • Fax: 513-649-8107

New Yo ork City, NY

7019 Brookville Rd. 718-626-3331 Indianapolis, IN 46239 317-375-7790 Fax: 317-375-7792 Danbury , CT

203-743-0088

Page 82 • May 6, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36 St. SW Fargo, ND 58014 701-280-3100 800-726-7475 th

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 7910 Highway 2 W Devils Lake, ND 58301 701-665-3800 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.

A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-6275

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

#TheMetsoWay

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 83

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................ Call

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 9-10 EB 614-395-4064

2000 Mustang 2042, 3350 Hours................$9,950 Call Tim 9-10 PK 651-437-3531

2004 Takeuchi TL140, 2546 Hrs, Cab & Heat............ ..........................................................................$26,166 Top Notch Equipment, Inc. 888-824-6559 9-10 PK

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 8-9 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 8-9 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 8-9 DH

2010 332D John Deere 89 HP, 202 Hrs, 2 Speed A/C Joystick Controls................................. $44,900 Call MN Equipment 763-428-4107 8-9 PK

2014 Gehl RT175, 70hp Yanmar, 12.6” Wide Rubber Tracks, 2 Speed Travel to 7.5 mph, 755 Hrs.............................................................. $31,400 8-9 JM Call Steve 262-373-2151

2012 Link-Belt 130 X2, 28” Wide Tracks, Mechanical Thumb, A/C, 95hp Turbo Isuzu T3 Diesel, 1475 Hrs.........................................$83,750 8-9 JM Call Steve 262-373-2151

2011 Volvo SD45D, 54” Wide Smooth Drum With Drum & Axle Drive, Kubota 4 Cylinder 84hp Diesel, OROPS, 380 Hrs........................................$42,850 8-9 JM Call Steve 262-373-2151

2015 Takeuchi TB230, OROPS, 6600 lbs, 2 Speed Travel, 24.4hp FT4 Yanmar Diesel, 435 Hrs ....................................................................$33,410 8-9 JM Call Steve 262-373-2151

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us

8-9 TM

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, Quick Coupler.......................................................... $135,000 Caleb Hinkkanen 800-456-4005 Ext. 143 9-10 PK

1975 Euclid R50, sn. 66395........................... $30,000 Albert Medcalf or Marcela Newman 8-9 EB 502-456-4050

2009 Ford F-750XL, Cummins ISB Engine, 260 HP, Automatic, OD Reading 268787, 10’ Gravel Star Bed Call Dave at REED Company 8-9 JM 620-340-7953

2004 International 4400, DT466 Engine, Automatic, New 11R22.5 Tires & Aluminum Wheels, OD Reading 229976, 8000# Service Crane w/14’ Utility Box Call Dave at REED Company 620-340-7953

8-9 JM

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

MK MARTIN 86HSEL SKID STEER BLOWER, 86” 23-26GPM..............................................$4,450 Call Tim 9-10 PK 651-437-3531

For more information, call Construction Equipment Guide today at 800/523-2200

1987 Cat D4HII, #13035 AB, OROPS, 6 way blade, 99 hp, 22242# Call Dave at REED Company LLC 620-340-7953

1999 International 4700 Crew Cab, #16112, DT466E, 5 Speed, 171K Miles, 12’ Utility box with 10 spacious compartments, can be equipped with pull out drawers and an extra air reservoir, goose neck or bumper pull hitch. Call Dave at REED Company LLC 8-9 JM 620-340-7953

8-9 JM

Page 84 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

2006-2010 Ingersoll Rand DD-118HF & DD-138HF 1999 Dynapac SP-CC-102 Dual Drum Vibratory 2012 Volvo MT2000 Milling Machine, Cummins Roller, #7137.............................................. .$6,500 610HP Tier 3 Dsl, 86” Keystone Cutter.... $275,000 Compactors, Various Units to Choose From! 8-9 JM 8-9 JM 800-283-1336 8-9 JM 800-283-1336 800-283-1336

2009 Volvo MW500 Milling Machine, 20” Wide Cutter, Deutz Diesel Eng, Rear Conveyor.$115,000 8-9 JM 800-283-1336

2013 Doosan DX235LCR, s/n 5454, 2158 Hrs, Aux. Hyd, Quick Latch and Bucket.......... $109,000 Contact David: dwietbrock@ronsonequipment.com 8-9 JM

2005 Linkbelt HTC 8660, 60 Ton Cat C-11 Engine, 13512 Hours, 110’ Main Boom, 56’ Jib, Aux Hoist , 3 Sheave Block, Ball Current Certification, Original Owner....................................................... $195,000 Call Andy Forepaugh 216-316-1511 9-10 EB

2001 Grove TMS 500E, 40 Ton, 95’ Main Boom, 26’-45’ Jib, 3 Sheave Block, 68,000 Miles, 10,112 Hrs, 1 Owner Machine, Fresh Grove Paint, Cleveland, Ohio............................................. CALL Call Andy Forepaugh 216-316-1511 9-10 EB

2007 Case SV208, s/n DDD002010, 1650 Hrs, ROPS, 66” Wide Smooth Drum Roller....... $41,000 9-10 JM Call Mark 630-739-7770

2006 Doosan Solar225LC-V with Cab, A/C, 2,205 hrs...............................................................$49,900 8-9 JM Call Mark 785-823-6378

2007 Case SV208PD, s/n DDD002057, 1000 Hrs, ROPS, 66” Padfoot Roller, Blade............... $41,000 9-10 JM Call Mark @ 630-739-7770

2009 Cat 420E, County Machine, Cab, A/C, 4-in-1 Loader........................................................ $45,000 Call Mark 785-823-6378 8-9 JM

2012 Case DV202, DDDDV202NCTF2016, 1175 Hours, Rops, Right side Drive Lever, 47" Drum....... ..................................................................... $24,900 9-10 JM Call Mark @ 630-739-7770

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: 2010 Bobcat E80, 3565 Hrs, 57 HP, 2-Speed Drive, 18” Digging Bucket, 24” Digging Bucket......... $49,500 Call George 219-696-8911 8-9 JM

Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at 2014 Terex TSV70 Skid Steer Loader, Vertical Path, 74hp, 2-Speed, Hyd-Quick-Tach 129” Hinge........ $36,600 9-10 EB Call Tania 614-443-9751 x237

800/523-2200

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition................................ $49,500 Call Tim 630-665-5600 9-10 JM

Scoop Rake, Heavy duty skid steer attachment ideal for rock, manure, straw, branches, waste, etc. 66” for $1,650. Sold by John Deere for $3,150. Oversupply. Blow out special!!! Other sizes available. attintl@loretel.net 8-9 JM 218-863-6444 755-410-5237

CLASSIFIEDS ASPHALT EQUIPMENT Asphalt Pavers 2008 Vogle 5203-2, 240 HP Cummins engine, used condition, 4,307 hours...... $99,000. 2006 LeeBoy 8500T, 56 HP, used condition, 5,,859 hours.. .................................. $25,000. Roland Machinery Co. Call Jay Germann 217-789-7711

EXCAVATORS

2004 Deere 200C LC, 48'' bucket w/ teeth and side cutters, used condition, 8,988 hrs .................................. $60,000. Roland Machinery Co. Call Jay Germann 217-789-7711

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

Call 815-379-2488 2012 Kobelco SK170-8E, A/C, 121 HP Tier 3 diesel, 24'' pads, 10' 2'' stick, 21' 5'' dig depth, hydraulic coupler, 37,800 lbs, pattern control, aux hyd., 3,163 hrs............................ $79,500. Illinois Truck & Equipment 815-941-1900

LOADERS Crawler Loaders 2011 Cat D4K LGP, 444 HP Tier 4 diesel, 41.9 ton cap (30.3 yds), Allison HD4560 trans, 6WD, heated box, rear view camera, rig saver, headache rack, auto lube, Magna 29.5 R25 radials, 69,300 lbs, 3,515 hours........................ $69,500. Illinois Truck & Equipment 815-941-1900

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Michigan Occupational Safety and Health Administration (MIOSHA) Coffee with MIOSHA MIOSHA invited employer and employees to share a cup of coffee and learn about the importance of workplace safety and health of Michigan workers. The Coffee with MIOSHA events will provide an informal opportunity for employers and employees to meet with MIOSHA representatives (Consultative, Enforcement & Radiation) and ask questions, obtain information on program services and resources, learn about MIOSHA Training Institute (MTI) opportunities, and establish rapport. Upcoming Dates & Locations: MAY 11, 2017 (CS) Construction Association of MI (CAM) 43636 Woodward Avenue Bloomfield Hills, MI 48302 MAY 24, 2017 (GI & GS) American Society of Safety Engineers (ASSE) TBD Ann Arbor, MI JUNE 7, 2017 (GI) Michigan Safety Conference 333 W. Michigan Avenue Lansing, MI 48933 GI = General Industry Safety and Health focus CS = Construction Safety and Health focus Northeastern Forest Products Equipment Expo 2017 Show Start Date: 19 May 2017 Show End Date: 20 May 2017 Open To: Trade Visitors Location: Cross Insurance Center 515 Main Street Bangor, Maine 04401 Event Profile: Northeast Forest Products Equipment Expo 2017 is the premier logging, saw-milling and pallet equipment show. Northeastern Forest Products Equipment Expo 2017 to be held on 19-20 May 2017. The 2017 Expo features new exhibit space around the Cross Insurance Center, with a familiar layout of the parking area where the outside component of the Expo has traditionally been set up. This event showcases products from the Agriculture & Forestry Industry. The Show will exhibit forest products, wood, timber products, forestry service, lumber, plywood, panel and pallet manufacturing, treating, laminating, and processing machinery, processing equipment and supplies. Visitor Profile: Visitors such as manufacturers, suppliers, traders, distributors, retailers, key decision makers and much more. For more information on this Expo, contact: Pam Leach, Show Project Manager, Northeast Loggers Association, Inc., P. O. Box 69, Old Forge, Old Forge, New York 13420. Phone: 315/369-3078.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

2007 Kobelco 210LC Mark 8 Long reach, approx. 2200 hours, heat & air, Cummins engine, 1 owner. Asking $95,000.

Hydraulic Excavators 2011 Case CX135SR, Cab/AC, Good condition, 2,350 hrs...... .................................. $88,000.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 85

Wheel Loaders 2011 Komatsu WA380-6 wheel loader, 2,888 hours...... ................................ $150,000. 2009 Komatsu WA500-6 wheel loader, 19,098 hrs.. $125,000. 2005 Komatsu WA400-5L wheel loader, 10,968 hrs........ .................................. $72,999. Roland Machinery Co. Call Jay Germann 217-789-7711

Get the latest news

online. Visit CEG’s Web Site at

DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?

Would you like

YOUR COMPANY featured in Construction Equipment Guide? If so, please contact us:

$40

ONLY

Construction Equipment Guide is THE Place to List It!

Call 800-523-2200

PA 19034

www.construction

You must have a classified print ad to do so.

or go online to place your ad

470 Maryland Drive, Fort Washington,

2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

equipmentguide.com

Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL Show Start Date: 26 May 2017 Show End Date: 29 May 2017 Open To: Trade Visitors and General Public Location: Broward County Convention Center Fort Lauderdale, FL 33316 Event Profile: Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL is a home design exhibition. Home Design and Remodeling Spring Show 2017 - Fort Lauderdale, FL is going to be held on 26-29 May 2017 at Broward County Convention Center, Fort Lauderdale, Florida. The Home Design and Remodeling Shows have a long-standing history in Miami and Fort Lauderdale for bringing the industry together with interested consumers of home improvements, interior design and remodeling. Meet face to face, with industry and retail customers ready to buy. For more information on this Expo, contact: Steve Plotkin, Show Project Manager. Home Show Management Corporation, 1450 Madruga Avenue, Suite 301, Coral Gables 33146. Phone: 305/667-9299. 4th ANNUAL FLEXIBLE & COST EFFECTIVE WELL SITE FACILITIES ONSHORE 2017 DATES: 27 September to 28 September, 2017 PLACE: Houston, TX North America’s Only Initiative Dedicated Entirely to Facilities Engineers & Project Management Professionals For more information, visit the event website: www.facilities-designonshore.com AGC of America (The Associated General Contractors of America) is the leading association for the construction industry. With over 26,000 member firms, AGC provides a full range of services satisfying the needs and concerns of its members, thereby improving the quality of construction and protecting the public interest. The AGC of America is comprised of 92 chartered Chapter affiliates and provides its Chapters and their members with professional development opportunities, up-to-the-minute information and trends in the industry, and discounts on products, programs and services. To become a member of AGC of America you must first become a member of a local AGC Chapter. Upon joining your local Chapter, you will automatically receive the added value of membership in AGC of America. We look forward to welcoming you to the premier construction trade association, The Associated General Contractors of America. For more information, contact AGC main office at 2300 Wilson Boulevard, Suite 300, Arlington, VA 22201. Phone: 703/548-3118. Fax: 703/548-3119. Email: Info@agc.org. AGC – The Associated General Contractors of America Federal Contractors Conference Monday, May 1, 2017 to Wednesday, May 3, 2017 Washington, District of Columbia AGC – The Associated General Contractors of America TCC Fly-In 2017 Wednesday, May 17, 2017 to Thursday, May 18, 2017 Washington, District of Columbia Division and Committee Meetings

AGC – The Associated General Contractors of America 2017 ACI-NA/ACC/AGC Airport Construction Strategy Summit Tuesday, May 23, 2017 to Wednesday, May 24, 2017 Los Angeles, California AGC – The Associated General Contractors of America WebEd: Key Tips for General Contractors & Subcontractors to Unlock Subcontract Negotiations Wednesday, May 24, 2017 – 2:00 PM to 3:00 PM Contracts and Construction Law All AGC WebEds are scheduled in Eastern Standard Time (EST). AGC – The Associated General Contractors of America AGC Safety & Health Conference Wednesday, July 19, 2017 to Friday, July 21, 2017 Denver, Colorado AGC of Minnesota 2017 – 2018 Scholarships AGC of Minnesota is pleased to announce that the 2017 – 2018 student scholarship application form is now available. The completed form and required information is to be submitted no later than MAY 26. Questions can be directed to Merry Beckmann at mbeckmann@agcmn.org or call 651/796-2187. AGC of Minnesota – Technical School and Craft Training Scholarships The AGC of America Education and Research Foundation offers Workforce Development Scholarships to students enrolled in accredited technical schools or craft training programs in any discipline of commercial construction. Students in technical or approved craft training programs will have until JUNE 1 to apply for $1,000 scholarships (renewable for up to two years). For more information, contact: Associated General Contractors of Minnesota. Phone: 651/632-8929. Denise Woods at dwoods@agcmn.org or website: http://www.agcmn.org. MN ASPHALT PAVEMENT ASSOCIATION MAPA 4th ANNUAL GOLF EVENT DATE: MONDAY, AUGUST 14, 2017 PLACE: 12800 BUNKER PRAIRIE ROAD NW COON RAPIDS, MN PWA – American Public Works Association 2017 PWX Registration is NOW OPEN! Make plans now to be in Orlando, FL August 27-30, 2017! Come experience all the public works profession has to offer in Orlando at PWX 2017. PWX draws thousands of professionals from all over the world. If you are like many of them, you have limited resources for professional development. PWX 2017 should be at the top of your list if you are looking for OUTSTANDING EDUCATION SESSIONS; a chance to meet with an extensive gathering of EXHIBITORS SHOWCASING THE LATEST PRODUCTS, SERVICES and TECHNOLOGIES; and for OPPORTUNITIES TO NETWORK WITH YOUR PEERS, HONE YOUR LEADERSHIP ABILITIES and LEARN NEW JOB SKILLS! Join nearly 6,000 of your public works colleagues from North America and beyond in Orlando for this exciting event! Register Today! Contact: American Public Works Association 1200 Main Street, Suite 1400 Kansas City, MO 64105-2100

Toll Free: 800/848-2792 Local: 816/472-6100 Fax: 816/472-1610 3rd ANNUAL PRODUCTION CHEMICALS OPTIMIZATION UNCONVENTIONAL OIL & GAS 2017 DATES: JUNE 27, 28 & 29, 2017 LOCATION: HOUSTON, TEXAS If you are spending millions of dollars a year on production chemicals, you need to make sure your program performs. Save the dates and reserve your place early for the 3rd Annual Production Chemical Optimization 2017 Congress, the number one production chemicals optimization event in North America returning to Houston, TX on June 27, 28 and 29, 2017. The 2017 conference will not only deliver brand new E&P success stories, new technologies and innovative ways of operating chemical programs to efficiently reduce lease operating expenses, but also give you the added option of attending specially designed pre-conference workshops to explore ways to implement the latest tools to market within a practical context. Sponsorship & Exhibition Opportunities Available – Following two (2) consecutive years of sold-out exhibition, this is the only one-stop shop for North American E&Ps looking for the most innovative products, services and technologies in this space. If having your company aligned with powerhouses in the industry is an important part of your strategy, this event gives you enormous opportunities to capitalize on. There is really no other event in the region that will give you the chance to meet all the active operators with the right purchasing job titles. Please contact the ABC team at sponsorship@american-business-conferences.com or CALL: 800/721-3915. BONNELL EQUIPMENT EXPO 2017 BONNELL INDUSTRIES, INC. TRUCK & ROAD EQUIPMENT CLEAR THE WAY FOR…JUNE 7 or JUNE 8, 2017 Dates: June 7 and June 8, 2017 Place: 1385 Franklin Grove Road, Dixon, IL 61021 DEMONSTRATIONS – DOOR PRIZES – FREE LUNCH – NEW & OLD EQUIPMENT - PICK ONE DAY TO ATTEND THE EXPO! EACH CUSTOMER WILL GET ONE (1) FREE LUNCH TICKET FOR ONE DAY OF THE EXPO. Quality products, people and food is what Bonnell Industries Equipment Expos are known for. Step into our manufacturing facility all while viewing our vendors’ latest advancements in products. RSVP by JUNE 1, 2017 CALL: 815/315-2617 or EMAIL: marketing@bonnell.com or contact your sales representative. IOWA LAND IMPROVEMENT CONTRACTORS ASSOCIATION (IALICA) Dedicated to Professional Conservation of Soil and Water 2017 NATIONAL SUMMER MEETING WHEN: JULY 11, 2017 to JULY 16, 2017 (all-day) WHERE: ELEGANTE HOTEL, COLORADO SPRINGS, CO (USA) For more information on the 2017 National Summer Meeting you may contact National LICA: Telephone: 630/548-1984 Fax: 630/548-9189 Email: NLICA@aol.com

Page 86 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: NEEDED BULLDOZER NEEDED USA LOCATION BULLDOZER KOMASTU 2014 AND UP 155 275 375. 475 ENV WITH RIPPER D10N D10R D10T D11N D11R D11T ENC ÇAB WITH RIPPER OR REPOSSES BANK OR LIEN CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL TD20C DOZER & INTERNATIONAL 250E LOADER RUNNING OR NOT, FOR PARTS! CONTACT: ALBERT HARLOW (PH: 267-738-5984) –––––––––––––––––––––––––––––––– WANTED: FORGING PRESSES LOOKING FOR FORGING PRESSES, 1350 TON, 1600 TON AND 2500 TO 4000 TON ALL MECHANICAL CONTACT: HERB KAISER (PH: 248-680-1000) EMAIL: HERB@GIBBSIND.COM –––––––––––––––––––––––––––––––– WANTED: 2 CATERPILLAR 740B ARTIC TRUCKS LATER MODEL, MAX 5000 HOURS, USA LOCATION CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR LATE MODEL BACKHOE ASAP IN TEXAS I'M LOOKING FOR 2000-2010 COMPLETE BACKHOE ASAP! PLEASE AUCTION PRICES ONLY. I'M A DEALER SO NO RETAIL, I'M LOOKING TO PURCHASE IN QTY IF THE PRICE IS RIGHT. LOOKING FOR UNITS IN THE TEXAS AREA IF POSSIBLE. I HAVE CASH TODAY!! NOTE: CAN BE IN WORKING OR NON WORKING CONDITION. CONTACT: MATTHEW (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 615 DIFF LOCK ASSEMBLY 615 PART #9V1761 FOR EVERYTHING, BOLTS TO SIDE OF CARRIER, RING PINION SHAPE DOES NOT MATTER CONTACT: DONNIE CHENEY (PH: 229-881-0751) EMAIL: DONNIECHENEY@YAHOO.COM FAX: 229-849-2191 –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 WANTED TO BUY HITACHI EX200, EX200-1, EX270, EX400 AND EX400-1. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 ––––––––––––––––––––––––––––––––

WANTED: CATERPILLAR 140G, 140H RUNNING OR NON-RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: RUNNING OR NON RUNNING MACHINES!!!! CAT WHEEL LOADER 936, 950, 950B, 950E, 950F, 966D, 966E, 966F AND 966G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM (PH: 713-855-6170) EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: 2002-2005 VERMEER HG 365 GRINDER PARTS UNIT I AM LOOKING FOR A 2002-2005 VERMEER HG 365 GRINDER UNIT FOR PARTS ONLY. I HAVE A COUPLE OF UNITS I'M LOOKING TO PUT TOGETHER. I'M A SERIOUS BUYER AND LOOKING TO ACT FAST. DOESN'T MATTER WHAT'S WRONG, DON'T CARE ABOUT THE HOURS. CONTACT: JAMES (PH: 346-230-4485) EMAIL: SALES.AMERICANPUMPANGEAR@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: INTERNATIONAL 260A BACKHOE ANY CONDITION CONTACT: RUDY (PH: 732-921-1314) EMAIL: CRUTILITIES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: GP 7.5 CUBIC YARD BUCKET FOR CAT 980G/H/K WE ARE LOOKING FOR CAT 980G/H/K 7.5 CUBIC YARD GP BUCKET WITH BOE (BUCKET ONLY). OTHER MAKES OF THE SAME SIZE BUCKET ARE ACCEPTABLE. WE APPRECIATE AND THANK YOU FOR YOUR RESPONSE. CONTACT: ROY FOLLICK (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: HYDRAULIC PUMP FOR 2700 Q LINK BELT CONTACT: TONY STEFFES PH: 414-651-7336 EMAIL: STEFFESANTHONY@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LINKBELT CRANES LINKBELT MODEL 48A OR LS68, LS78, LS 98, OR LS108. OPERATING OR PARTS MACHINES CONTACT: WILLIAM TAYLOR PH: 609-868-0326 EMAIL: TAYLORSCRANESERVICE@GMAIL.COM FAX: 856-468-5742 ––––––––––––––––––––––––––––––––

WANTED: FORD BACKHOE 455C I AM LOOKING FOR A TECHNICIAN FAMILIAR WITH THE ENTIRE ELECTRICAL SYSTEM OF A FORD BACKHOE 455C. THE MACHINE IS LOCATED IN CONSHOHOCKEN, 19428 CONTACT: JON NEVE PH: 610-828-9869 EMAIL: JAMESJNEVEINC@GMAIL.COM FAX: 610-828-0382 –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS, BUT NOT INCLUDING TRUCKS AND VEHICLES. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION, IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: HORIZONTAL DIRECTIONAL DRILLS I AM CURRENTLY LOOKING TO PURCHASE HDD UNITS ASAP! ANYWHERE IN THE U.S. CAN BE WORKING OR BROKEN. MUST HAVE LOW MILES AND RODS AND BASKET MUST BE IN PLACE. I WILL PAY FOR SHIPPING. MUST HAVE FULL SPECS AND PHOTOS READY. CONTACT: MATTHEW STEVENSON PH: 346-230-4485 EMAIL: MATT.TURBOWELDINGSVC@GMAIL.COM FAX: 346-230-4485 –––––––––––––––––––––––––––––––– WANTED: DRESSER TD 20 G W/EROPS DOZER WITH NO MORE THAN 5000 HRS. SEMI-I BLADE PREFERRED. CONTACT: RANDY MYERS PH: 785-948-2231 EMAIL: RANTAW@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BUCKETS FOR 322/325 CAT EXCAVATORS EXCAVATOR BUCKETS CAT 322/325 WITH 80MM PINS CONTACT: KEN PH: 330-219-1003 EMAIL: KRV8815@MSN.COM –––––––––––––––––––––––––––––––– WANTED: ATTACHMENTS INTERNATIONAL WANTED TO BUY ATTACHMENTS INTERNATIONAL SEVERE SERVICE DEMOLITION GRAPPLES FOR 46-62,000 WEIGHT EXCAVATOR. WOULD CONSIDER LABOUNTY. PHOTO AND PRICE PLEASE. CONTACT: AMIE PH: 218-863-6444 EMAIL: AMIE@ATTACHMENTSINTL.COM ––––––––––––––––––––––––––––––––

WANTED: AT 422 GROVE CRANE TRANSMISSION CONVERTER AND TRANSMISSION CASE (COMPLETE WITH ALL GEARS) FOR A 1989 GROVE AT-422 CRANE. SERIAL #69502, MODEL 4425 G CONTACT: JAMES ARNETT JR (PH: 937-277-8080) EMAIL: JARNETTJR@ORBITSDO.COM FAX: 937-277-3951 –––––––––––––––––––––––––––––––– WANTED: USED SWINGER 200/220 REAR AXLE USED SWINGER 200/220 REAR AXLE. DANA MODEL 60 OR 70 TRAC LOCK AXLE CONTACT: GERRY (PH: 218-863-6445) EMAIL: ATTINTL@LORETEL.NET –––––––––––––––––––––––––––––––– WANTED: BOBCAT 863 LOOKING FOR A LOW HOURS WANTED: LARGE SAND OR MASS MACHINE, HYD STABILIZER A PLUS. EXCAVATING BUCKETS CONTACT: WILLIAM TEETERS WANTED TO BUY LARGE SAND OR PH: 715-563-7162 MASS EXCAVATING BUCKETS. PREFER EMAIL: BILLT_54726@YAHOO.COM ATTACHMENTS INTERNATIONAL OR FAX: 715-563-7162 EMPIRE. MUST BE REBUILDABLE. –––––––––––––––––––––––––––––––– PHOTO AND PRICE PLEASE. WANTED: TRIAXLE ROAD TRACTOR CONTACT: SHANA DAY CAB PH: 218-863-6445 TRIAXLE ROAD TRACTOR FOR HEAVY EMAIL: HAUL 240-250INCH WHEELBASE DOUSHANA@ATTACHMENTSINTL.COM BLE FRAME 500PLUS HP 18 SPEED –––––––––––––––––––––––––––––––– DAY CAB 20K PUSHER NEWER NO WANTED: EQUIPMENT MANUALS RUST BUYING NEW OR USED CONSTRUCCONTACT: JOE TION AND AGRICULTURE SERVICE, PH: 724-944-5569 PARTS AND OPERATOR MANUALS. EMAIL: FJS-1@ATT.NET EQUIPMENT DEALERS & PRIVATE COM- –––––––––––––––––––––––––––––––– PANIES, IF YOU HAVE MANUALS JUST WANTED: 785 SKID STEER LOADER, SITTING ON THE SHELF AND YOU NO NEW HOLLAND LONGER NEED THEM, PLEASE GIVE STOLEN FROM HARLAN MIDDLEME A CALL OR EMAIL. I BUY LARGE BROOKS IN 2013 IN FLINTSTONE, GA. AND SMALL LOTS. JOHN DEERE CAT, SERIAL NO. 820904. 1992 YR. HAD KOMATSU, CASE, NEW HOLLAND, CLAM BUCKET ON IT. REWARD FOR VOLVO, DOOSAN AND SO ON. INFORMATION. MAY BE IN TN, GA, OR CONTACT: JOHN WHITNEY KY. PLEASE HELP. THANK YOU. PH: 530-864-0771 CONTACT: PAUL MIDDLEBROOKS EMAIL: WHITNEYJ65@YAHOO.COM PH: 423-580-5078 FAX: 530-864-0771 EMAIL: –––––––––––––––––––––––––––––––– PAULMIDDLEBROOKS@YAHOO.COM WANTED: YANMAR MODEL 55R –––––––––––––––––––––––––––––––– YANMAR MODEL 55R TRACK CARRIWANTED: RADIATOR FOR A LINKBELT ER/DUMP -LOOKING FOR A MACHINE 40 TON CRANE FOR PARTS -CAN BE BURNT OR NEEDED, RADIATOR FOR A 1980 40 WRECKED. TON LINKBELT RT CRANE. MODEL # CONTACT: TIM LEWANDOWSKI HSP8040 (PH: 724-640-4396) CONTACT: JAMES ARNETT JR EMAIL: (PH: 937-277-8080) LEWEQUIP.BRANDON@GMAIL.COM EMAIL: JARNETTJR@ORBITSDO.COM –––––––––––––––––––––––––––––––– FAX: 937-277-3951 WANTED: LATE MODEL TANDEM AXLE –––––––––––––––––––––––––––––––– MACK DUMP WANTED: TWIN 44 WASH PLANT, SAND CONTACT: CHRIS MCPHILLIPS LOOKING TO BUY USED TWIN 44 WASH (PH: 610-8647529) PLANT FOR SAND. PLEASE EMAIL ME EMAIL: MCPHILLIPSCJ@AOL.COM PICTURES, DETAILS, PRICE AND LOCAFAX: 610-7893076 TION. –––––––––––––––––––––––––––––––– CONTACT: MICHAEL BUHLER WANTED: JCB ROPS/FOPS PH: 814-637-5599 CONTACT: ROBT. EMAIL: NORTHSTARAGG@ WINDSTREAM.NET EMAIL: DEN_AYE@YAHOO.COM FAX: 814-637-5598 FAX: 215-757-3665 –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: CATERPILAR MOTOR GRADER 140G LOOKING FOR USED CONSTRUCTION EQUIPMENT IF YOU HAVE ANY OF THESE IN YOUR INVENTORY PLEASE CONTACT ME THROUGH EMAIL OR MY PERSONAL CELL NUMBER. BELOW IS MY REQUIRED MACHINERY LIST. WHEEL LOADER (CATERPILLAR), ROLLERS (DYNAPAC), MOTOR GRADERS (CATERPILLAR), EXCAVATORS (HITACHI). MODEL1. 930 2. 950B 3. 950E 4. 966F 5. 966F(II) 1. CA301 2. CA251 3. CA262 4. CA602 5. CA362 CONTACT: ILYAS KHAN PH: +923322489350 EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CASE 1150C DOZER 34X6 PYRAMID SHOES NEED 2 SOME CALL THEM ATEX SHOES. CONTACT: DAVID RESTER PH: 901-490-8888 EMAIL: HIGHFLYR@BELLSOUTH.NET FAX: 731-635-3366 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE EXCAVATOR & LOADER I HAVE AN IMMEDIATE NEED FOR AN EXCAVATOR AND POSSIBLY A LOADER IF THE PACKAGE IS PRICED RIGHT. PLEASE ONLY OFFER MACHINES THAT FIT REQUIREMENTS. COULD BE ANY OF THESE MODELS ZERO TAIL OR TRADITIONAL WITH THE FOLLOWING OPTIONS: DEERE 225D OR 245G, 240D OR 250G, 270D OR 290G. UNDER 3500 HRS, LONG STICK, HYD THUMB, HYD COUPLER, BEST PRICE. DEERE 644K OR 724K. UNDER 4000 HRS, HYD COUPLER, RIDE CONTROL, BEST PRICE. PERFER WESTERN OR MIDWEST US FREIGHT LOCATION. CONTACT: CALEB COLBORN PH: 208-757-3564 EMAIL: CALEB@DOUBLEEDGE EQUIPMENT.COM FAX: 208-403-0363 –––––––––––––––––––––––––––––––– WANTED: KOMATSU EXCAVATOR PC300-5 & PC300-6 WANTED TO BUY KOMATSU EXCAVATOR PC300-6 CONTACT: ABDAL PH: 415-687-0337 EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: CAT 950B AND 950E I AM LOOKING FOR 950 B AND 950E CONTACT: ALI PH: 206-802-5306 EMAIL: PIGL_PK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: USED 12G MOTOR GRADER WITH RIPPER WANTED TO BUY CAT 12G. IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM PH: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM FAX: 281-727-0415 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 87

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

• Lincoln, NE May 11, 2017

• Burlington, VT Sat., May 6, 2017 For: Late Model Construction Equipment & more

• St. John’s, NL, CAN May 16, 2017

• Scott City, MO Thurs., May 11, 2017 For: Liquidation Concrete Products & more

• Bozeman, MT May 12, 2017

• Williston, ND May 16, 2017 • Fort Worth, TX May 17 - 18, 2017

• Grand Rapids, MN Fri., May 12, 2017 For: Construction & Aggregate Equipment & more

• Pittsburgh, PA May 18, 2017

• Providence, RI Sat., May 13, 2017 For: Rental Fleet Midi Construction Equipment & more

• Los Angeles, CA May 19, 2017

• Dallas, TX Tues., May 16, 2017 For: Rentals! Construction Equipment & more • San Angelo, TX Thurs., May 18, 2017 For: Late Model Rental Returns • Syracuse, NY Sat., May 20, 2017 For: Complete Liquidation Construction Equipment • Canastota, NY Sun., May 21, 2017 For: Annual Landscape/Lawn & Garden Equipment • Kissimmee, FL Mon., May 22, 2017 ForLate Model Rental Fleet Construction Equipment & more • Long Island, NY Sat., May 27, 2017 For: Rental Fleet Auction • Richmond, VA Wed., May 31, 2017 For: Liquidation. Crane, Construction Equipment & more • Queretaro, Mexico Fri., June 2, 2017 For: Late Model Earthmoving Equipment & more • Buffalo, NY Sat., June 3, 2017 For: Job Completion, Construction Equipment & more • Lexington, KY Wed., June 7, 2017 For: Liquidation. Crane, Construction Equipment & more • Parkersburg, WV Sat., June 10, 2017 For: Classic Cars • Las Vegas, NV Sat., June 17, 2017 For: Very Large Rental Fleet Auction • Atlantic City, NJ Sat., June 24, 2017 For: Very Late Model Rental Returns • Syracuse, NY Sat., July 15, 2017 For: Very Large Late Model Cat Rental Returns

• Lethbridge, AB May 18, 2017

• Chehalis, WA May 23, 2017 • Orlando, FL May 23, 2017 • Tipton, CA May 25, 2017 • Downtown Columbus, OH May 25, 2017 • Chicago, IL May 26, 2017 BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Sacramento, CA Sat., May 13, 2017 For: Monthly Public Auction • Portland, OR Fri., May 26, 2017 For: Monthly Public Auction • Sacramento, CA Sat, June 10, 2017 For: Monthly Public Auction • Riverside, CA Sat, June 17, 2017 For: Monthly Public Auction • Portland, OR Fri., June 30, 2017 For: Monthly Public Auction • Sacramento, CA Sat., July 8, 2017 For: Monthly Public Auction BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Midland, TX Fri., May 19, 2017 For: Construction Equipment • Dallas (Anna), TX Fri., June 9, 2017 For: Construction Equipment BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY Thurs., May 11, 2017 • ONLINE ONLY Thurs., May 18, 2017

• Northern New England Sat., July 29, 2017 For: Complete Liquidation Retirement Auction

• ONLINE ONLY Thurs., May 25, 2017

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

• ONLINE ONLY Thurs., June 8, 2017

• Grand Junction, CO May 10, 2017

• ONLINE ONLY Thurs., June 22, 2017

• Toronto, ON, CAN May 10 – 11, 2017

• ONLINE ONLY Thurs., June 29, 2017

• ONLINE ONLY Thurs., June 1, 2017

• ONLINE ONLY Thurs., June 15, 2017

Coming Auctions

J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

• Rome, NY Sat., May 6, 2017 For: Construction Equipment

• Lebanon, TN Sat., June 10, 2017 For: Construction Equipment

To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

• Verona, KY Thurs., May 11, 2017 For: Construction Equipment

• ONLINE ONLY Sat., July 15, 2017 For: Construction Equipment

• Gary, IN Sat., May 13, 2017 For: Construction Equipment

• Lebanon, TN Sat., September 9, 2017 For: Construction Equipment

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

RTI AUCTIONS www.teitsworth.com 585-243-1563

• Brooklyn, MS May 5 - 6, 2017 For: Late Spring Public Auction

• Palmyra, NY Sat., May 13, 2017 For: Palmyra Municipal Auction

BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY May 10, 2017 • ONLINE ONLY May 17, 2017 • ONLINE ONLY May 24, 2017 • ONLINE ONLY May 31, 2017 • ONLINE ONLY June 7, 2017 • ONLINE ONLY June 14, 2017 COMMOMWEALTH OF PA www.auctionsbygov.com 866-469-7383 • Harrisburg, PA Tues., June 6, 2017 For: Spring Heavy Equipment Auction DARELL DUNKLE & ASSOCIATES AUCTIONEERS INC. www.dunkleauctioneers.com 800-433-6670 • Harrison, MI Thurs., May 18, 2017 For: Annual Spring Contractors Auction DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., June 24, 2017 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540

• Philadelphia, MS May 24 - 25, 2017 For: Huge 2-Day Public Auction • Philadelphia, MS July 19 - 20, 2017 For: Huge 2-Day Public Auction • Philadelphia, MS September 12 - 13, 2017 For: Huge 2-Day Public Auction

• Marietta, PA Fri., June 16, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., August 18, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., October 20, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., December 8, 2017 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY May 10, 2017 • ONLINE ONLY May 31, 2017 • ONLINE ONLY June 14, 2017 • ONLINE ONLY June 28, 2017 • ONLINE ONLY July 12, 2017 • ONLINE ONLY July 26, 2017 • ONLINE ONLY August 9, 2017 • ONLINE ONLY August 30, 2017 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Lewis Run, PA Thurs., June 1, 2017 For: Complete Liquidation Eastern Industrial I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., June 9, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction

• Stanton, TX Wed., June 21, 2017 For: Permian Basin Absolute Public Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Princeton, WV Tues., May 23, 2017 For: Construction Equipment & more

• Pelzer, SC Thurs., June 22, 2017 For: Summer Contractors Auction

• Rockaway, NJ Fri., May 19, 2017 For: Crane Auction

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700

• Seven Valleys, PA Tues., May 9, 2017 For: Tractor, Farm & Construction Equipment

• Princeton, MN Sat., June 10, 2017 For: Construction Equipment, Truck & Trailers

• Seven Valleys, PA Tues., June 13, 2017 For: Tractor, Farm & Construction Equipment

• Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers

• Seven Valleys, PA Tues., July 11, 2017 For: Tractor, Farm & Construction Equipment

• Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers

• Seven Valleys, PA Tues., August 8, 2017 For: Tractor, Farm & Construction Equipment

WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580

MIDEAST EQUIPMENT SUPPLY www.mideastequip.com 860-370-9993 • ONLINE ONLY Wed., May 10, 2017 For: Heavy Equipment PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

DUNN DEAL AUCTION CO. www.dunndealauctions.net 614-946-6853

• Sebring, FL Sat., May 13, 2017 For: Construction & Agricultural

• ONLINE ONLY Thurs., May 18, 2017 For: Truck & Trailer Auction

• Sebring, FL Sat., July 15, 2017 For: Construction & Agricultural

• ONLINE ONLY Tues., May 23, 2017 For: Sharpe Rentals Inventory Reduction Auction

• Sebring, FL Sat., September 9, 2017 For: Construction & Agricultural

• ONLINE ONLY Thurs., May 25, 2017 For: Construction Equipment • ONLINE ONLY Thurs., June 1, 2017 For: Truck & Trailer Auction

• Sebring, FL Sat., November 11, 2017 For: Construction & Agricultural

• Windsor Locks, CT Sat., June 17, 2017 For: JDC Enterprises Liquidation Auction SHETRON AUCTIONS www.shetronequipment.com 717-532-8828

INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225

HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

• Windsor Locks, CT Sat., May 6, 2017 For: Public Equipment Auction

• Summerville, WV Tues., June 6, 2017 For: Fleet Reduction Auction

• Philadelphia, MS November 15 - 16, 2017 For: Huge 2-Day Public Auction

• Stoutsville, OH Sat., May 6, 2017 For: Spring Columbus Heavy Equipment & Truck Auction

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506

• ONLINE ONLY Thurs., May 11, 2017 For: Construction Equipment

• Frederick, MD Fri., May 12, 2017 For: Mid Atlantic Contractors Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., May 13, 2017 For: Live Public Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL Wed., May 24, 2017 For: Heavy Equipment Auction • Saugatuck, MI Wed., May 31, 2017 For: Heavy Equipment Auction • Atlanta, GA Thurs., June 8, 2017 For: Heavy Equipment Auction

Page 88 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Alex Lyon & Son Conducts Auction in Racine, Wis.

lex Lyon & Son held an auction in Racine (Mt. Pleasant), Wis., on April 29. The auction consisted of telescopic forklifts, hydraulic excavators, crawler tractors and much more. A variety of manufacturers were represented, including Cat, Terex, Komatsu and more. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Jack Lyon, president of Alex Lyon & Son, calls for more bids at the April 29 auction in Racine, Wis. Norm Paulson (L) of Paulson Kimball Construction and Rodney Kastler of Kastler Builders LLC. Simon Bradley (L), U.S. Equipment Sales & Rentals, talks with and John Avelar of J. Ave Development.

Andy Martin (L) and Jonathan Swift, both of Swift Restoration, stop by the auction. Russell Schuchaskie (L) of Schuchaskie Construction and Fred Mlados of Fred’s Repair & Fabrication check the stick of this Case 9030 excavator.

Curt (L) and Blake Decker of Decker Fire Protection have a look at this late-model Case 580 Super N loader backhoe.

Norm Manthe (L), Northwest Equipment & Trailer, and Tina Boyt enjoy their time at the auction.

(L-R): Adam Heinson, Jelly Stone Park; Jeff Knepper, Five Star Services Inc.; Steve Bigelow, Elite Electrical Co.; and Tom Mateljan, Five Star Services Inc., look over the skid steers at the April 29 auciton.

Bud Pecoy (L), Mid Country Machinery Inc., and Art Bayley, 1st Source Bank, attend the auction.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 89

I-39/90 Project to Wrap Up in 2022 WISDOT from page 66

As the I-39/90 Expansion Project progresses, project staff and the department’s financial team continue to review alternatives and new opportunities to minimize the impacts to the public and reduce costs. The overall corridor construction schedule is developed and managed by the CMT. Monthly meetings have been held since 2012 to revise schedules as a result of the corridor funding stream adjustments. Preliminary construction schedules for each let contract are developed by the segment designers prior to advertising the letting. The schedules are worked up in Oracle P6 software and the critical paths are evaluated. This information is made available to the potential bidders as a head start in determining a more detailed construction schedule. In addition to daytime work, most construction projects require some nighttime activities. This is necessary due to the high traffic volumes during the daytime hours in this area. Working at night, under lane closures and often behind barrier walls, increases the safe-

ANNUAL SPRING CONTRACTORS AUCTION Crews install new girders for I-39/90 bridge over local roadway.

ty of the motorists and construction crews. Typically, crews cease operations around mid- to- late November for a winter shutdown and resume in the spring, once weather permits. With certain projects, such as the I-39/90 and Rock River bridges near Edgerton and Newville, work occurred throughout the winter as crews removed the previous northbound bridge deck and piers. In early January 2017, demolition experts used explosives to break up and remove the pier foundations under the water level. “Significant planning was completed prior to the blast to ensure motorists,

work crews, the new bridge and existing I-39/90 southbound bridge were safe from the blast,” said Theisen. “Interstate traffic was slowed to 20 mph by Wisconsin State Patrol troopers far in advance of the bridges near Edgerton and Newville. Within six minutes of the blast being completed and the all clear was given, traffic resumed normal operations.” The overall I-39/90 Expansion Project is expected to be completed in 2022. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Thursday, May 18, 2017

Harrison, Michigan Quality Consignments Welcome Excavators, Backhoes, Loaders, Skid steers & Attachments, Farm Eqiupment, Truck Tractors & Trailers, Utility & Pickups, Trucks, Recreational Vehicles, Support Equipment, Boom Trucks, Terek Trucks, Digger Derricks, Lowboy 50 Ton, And More to Come!

If you have one item or an entire fleet to sell, call today.

(800) 433-6670 FAX (989) 539-5686 E-Mail: info@dunkleauctioneers.com Web: www.dunkleauctioneers.com

Page 90 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 91

Page 92 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Nitke Hosts 52nd Annual Wisconsin Contractors Auction

itke Auctions held its 52nd annual Wisconsin Contractors Auction on April 28 and 29 in Wausau, Wis. A variety of equipment was sold, including dump trucks, truck tractors, backhoes, wheel loaders, track excavators and much more. For more information, visit nitkeauctions.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Wayne Rambo of Rambo Salvage Yard looks over this JCB JZ 70 excavator. Brad Gumz of Gumz Logging checks the tracks of the John Deere 700H dozer.

Tyler Kurth shops at the auction yard and stops to see this John Deere 700 dozer. Bruce Hill of Hill Heavy Equipment wants to take this Cat D5 home.

Leo Krivickas, president of Nitke Auctions, scans the crowd for more bids at the 52nd annual sale.

Ricky Sarazin of Sarazin Logging sits at the controls of this John Deere 190 excavator.

This John Deere 450C captures the attention of James Langreck.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 93

Page 94 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Jeff Martin Auctioneers Hosts Its First Midwest Auction

Customers place their bids on the farm and construction attachments at the auction.

eff Martin Auctioneers held a farm and construction equipment public auction in Ottumwa, Iowa, on April 13. The auction, which was the company’s first venture in the Midwest, proved to be a great Chad Moret (L) and Josh Gillespie of Des Moines, success. Iowa, inspect the farm and construction equipment This public auction was held for several consignors, including local attachments at the Ottumwa, Iowa, auction. contractors liquidating inventory. A total of 282-plus buyers participated in live and online bidding, some from as far as Texas, Florida and South Carolina. Highlights from the auction included a 2016 John Deere 50G excavator, a 2011 John Deere 724K wheel loader, a 2016 John Deere 35G mini-excavator and a 2016 John Deere 317G multi-terrain loader. Jeff Martin Auctioneers’ next two-day auction in Brooklyn, Miss., will be the Late Spring Public Auction held May 5 and 6. Live and online bidding will be offered both days. This auction will feature construction equipment, heavy trucks, farm equipment, attachments, vehicles and related items. For more information, visit jeffmartinauctioneers.com. (This story also can be found on Construction Equipment Guide’s Mike Sander (L) and Tim Skinner from website at www.constructionequipmentguide.com.) Ottumwa, Iowa, take a break from bidding.

A group of bidders gather to bid on trailers during the April 13 auction in Ottumwa, Iowa.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 95

Page 96 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Unreserved public equipment auction Fast, flexible financing available – up to 100%, $0 down*

2 of 3 – Oshkosh S2146 6x6

2008 Wirtgen W2000

Case 721D

2011 Case SR220

2008 New Holland T2320

Caterpillar 966G

Caterpillar AP1000B

Oshkosh F2346 w/Putzmeister M32Z

GMC 3500

Downtown Columbus, Ohio

May 25 (Thursday) 9 am

Equipment includes

On-site inspection hours

Bid in person or online

Location

Mixer trucks, wheel loaders, concrete pump trucks, pavers, skid steer loader, profilers, pickups & much more

Mon–Fri, 8 am–5 pm

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

700 Hart Road, Columbus, OH

Financing & leasing available Up to 100% financing, with no money down.

More items added daily Call about selling: 860.642.4200

See complete listings at rbauction.com/Petrowsky *OAC. Terms & conditions apply. See rbauction.com/financing.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 97

Unreserved public equipment auction Fast, flexible financing available – up to 100%, $0 down

Caterpillar 950G Series II

Caterpillar 330CL

1 of 4 – Volvo A40D 6x6

Volvo G720B

2011 John Deere 850K WT

Komatsu PW170ES-6K 4x4

Caterpillar 953C

John Deere 310SE 4x4

Ingersoll-Rand DD90

Lexington, Kentucky

May 31 (Wednesday) 9 am

Equipment includes

Bid in person or online

Financing & leasing available

Location

Excavators, wheel loaders, crawler tractors, articulated dump trucks, backhoes, compactors, trucks, trailers, lift & material handlers, attachments & much more

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

Up to 100% financing, with no money down.

1100 Early Rd, Winchester, KY

More items added daily Call about selling: 859.721.2277

See complete listings at rbauction.com Auctioneer: Kevin L. Perry #RP 2607 *Limited-time offer from Ritchie Bros. Financial Services. OAC. Terms & conditions apply. See rbauction.com/financing.

Page 98 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AGGCORP............................................................................................................ 70 ALEX LYON & SON INC SCOTT CITY MO / GRAND RAPIDS MO.................................................. 91 DALLAS TX / KISSIMMEE FL.................................................................... 93 RICHMOND VA............................................................................................95 ALEX PARIS CONTRACTING CO INC.................................................................. 9 ALLIED CONSTRUCTION PRODUCTS................................................................76 ALLU GROUP........................................................................................................ 37 AMERICAN STATE EQUIPMENT............................................................................ 7 ARING EQUIPMENT CO INC................................................................................ 29 ARTIC SNOW & ICE CONTROL.......................................................................... 36 ASCENDUM MACHINERY INC............................................................................ 11 ATI CORPORATION.............................................................................................. 37 BANDIT INDUSTRIES INC.................................................................................... 73 BARGAINS ...................................................................................................... 83,84 BLUE RIDGE TRACTOR...................................................................................... 28 BRANDL MOTORS................................................................................................ 54 BROOKS TRACTOR..............................................................................................33 CEG SCALE MODELS.......................................................................................... 30 CLASSIFIEDS........................................................................................................ 85 CLEARSPAN FABRIC STRUCTURES.................................................................. 31 CONSTRUCTION EQUIPMENT GUIDE WANTED......................................................................................................86 AIR COMP PROMO.................................................................................... 64 CEG 360...................................................................................................... 32 AUCTION TRIPLE BUY.............................................................................. 90 SHOPPING FOR USED EQUIPMENT........................................................ 52 CUSTOM MADE PRODUCTS................................................................................ 6 DARELL DUNKLE.................................................................................................. 89 DEUTZ CORPORATION.................................................................................. 20,31 DOOSAN PORTABLE POWER............................................................................ 61 DOPPSTADT..........................................................................................................80 DYNAPAC.............................................................................................................. 45 EAGER BEAVER TRAILERS................................................................................ 17 ERB EQUIPMENT CO.......................................................................................... 15 FABICK CAT............................................................................................................ 2 FAE USA INC........................................................................................................ 80 FARM-RITE EQUIPMENT INC........................................................................ 10,16 FELLING TRAILERS.............................................................................................. 58 FINKBINER EQUIPMENT CO................................................................................ 7 FLANGE LOCK...................................................................................................... 33 FOLEY EQUIPMENT CO...................................................................................... 21 FURY PARTS & SERVICE.................................................................................... 56 GARY CARLSON EQUIPMENT.............................................................................. 8 GRINDERCRUSHERSCREEN.COM.................................................................... 80 GROVE WORLDWIDE.......................................................................................... 40 HOWELL TRACTOR & EQUIPMENT CO............................................................100 ILLINOIS TRUCK & EQUIPMENT.......................................................................... 3 IRAY AUCTIONS INC FOLEY MN.................................................................................................. 94

JEFF BELZER........................................................................................................ 57 JJ SCHECKEL CORP............................................................................................ 24 JOHN DEERE........................................................................................................ 38 KCM .................................................................................................................... 51 KLEEMAN.............................................................................................................. 71 KOBELCO CONSTRUCTION MACHINERY ........................................................ 46 KOMATSU AMERICA CORP............................................................................ 42,62 KPI-JCI.................................................................................................................. 75 KUBOTA................................................................................................................ 44 MCCANN INDUSTRIES INC....................................................................................6 METSO MINERAL CRUSHING..............................................................................69 METSO MINERAL SCREENING.......................................................................... 82 MID COUNTRY MACHINERY................................................................................23 MUSTANG MFG.................................................................................................... 65 NORAM.................................................................................................................. 48 PATTEN TRACTOR & EQUIPMENT CO.............................................................. 19 POWERSCREEN MW DEALER............................................................................ 79 PURPLE WAVE INC.............................................................................................. 89 RANSOME EQUIPMENT SALES LLC/LRH.......................................................... 86 RDO EQUIPMENT/MINNESOTA EQUIPMENT.................................................... 50 RITCHIE BROS AUCTIONEERS COLUMBUS OH.......................................................................................... 96 UNRESERVED PUBLIC AUCTION MULTISALE........................................ 99 LEXINGTON KY.......................................................................................... 97 ROAD BUILDERS MACHINERY...................................................................... 13,37 ROLAND MACHINERY INC.................................................................................... 5 SANY AMERICA INC............................................................................................ 31 SCHAEFER ENTERPRISES..................................................................................36 SCREEN MACHINE INDUSTRIES........................................................................ 77 SENNEBOGEN...................................................................................................... 72 SMITHCO.............................................................................................................. 56 STAR EQUIPMENT LTD.......................................................................................... 6 SULLIVAN PALATEK..............................................................................................25 TEREX CRANES.................................................................................................. 60 TEREX FUCHS...................................................................................................... 81 THE VICTOR L PHILLIPS CO.............................................................................. 20 TOWMASTER INC................................................................................................ 55 WALLWORK TRUCK CENTER..............................................................................20

OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES........................................................................................ 5 COLUMBUS EQUIPMENT CO............................................................................... 8 COMPANY WRENCH.............................................................................................. 3 EQUIPMENT CORP OF AMERICA........................................................................ 6 JCB OF OHIO.......................................................................................................... 4 SAMSEL SUPPLY CO..............................................................................................5 THE MCLEAN CO....................................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 6, 2017 • Page 99

Unrreserv rvved ed public equipment auctions

16 0+

2012 Caterpillar 16M | Bozeman

22 0

LO AD ER BA CK HO ES

DIR EC TIO NA LD RIL LS

27 0+

MO TO RG RA DE RS

2012 Caterpillar D6TT XWVP | Bozeman

2012 John Deere 844K Series II | Bozeman

AR TIC UL ATE DD UM PT RU CK S

WH EE LL OA DE RS

CR AW LE RT RA CT OR S

49 0+

39 0+

Fast, flexiblee financing available - up to 100%,, $0 down*

2010 Vermeer Vermeer D330X500 D330X X500 | FFort Worth

Caterpillar 950G Series II | Lexing gtton

1 of 4 – Vo Volvo A40D 6x6 | Lexing xing gton

69 0+

HY DR AU LIC EX CA VA TO RS

BO OM

48 0+ LIF

4 of 8 – 2012 John Deere 310SK 4x4 | Fort Worth

1 of 3 – 2006 JLG 1350SJP 4x4x4 | Chicago

2011 Caterpillar 328DL CR | Chicago

36,880+ items in 130+ auctions including Forrtt Worth, TX Pittsburgh, rgh, PA PA Los Angeles, CA Chehalis, WA WA Orlando, FL Tipton, CA

May 17–18 Mayy 18 Mayy 19 May 23 Mayy 2 23 Mayy 25

Downtown Columbus, OH Mayy 25 Chicago, IL Mayy 26

Financing & leasing available Up to 100% financing, with no money down.

Auctioneer Chad M. Johnson # 17668, Auction Company License #AAY00208L, Y00208L, Auction Company Bond #0470724, Auctioneer John Korrey Bond # 0470729, Auction Company License # 1981, Motor Vehic Vehicle Dealer License #1539, Auction Business License #AB303, Auctioneer Frederick R. Vilsemeier # AU3689, Auction Company Bond #0470724, Auctioneer Greg Highsmith Bond # 0470728, OAC. Terms & conditions apply. See rbauction.com

Bid in person or online ▸ No minimum bids or reserve prices ▸ Te Testt and inspectt on-site on▸ Open to the public, free registration

More items added daily Call about selling: 1.800.211.3983

See fu full auction & equipment listing gss at rbauction.com

Page 100 • May 6, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TIRED OF TIER 4 HEADACHES? CHECK OUT OUR NEAR NEW INVENTORY OF TIER 1-3

THIS IS ONLY A SMALL SELECTION! VISIT HOWELLTRACTOR.COM FOR FULL INVENTORY!

2009 SENNEBOGEN 821M 'C 11,293 Hours, New Solid Tires

2013 SENNEBOGEN 860M New Paint, 35’ 5” Boom 27’ 7” Stick

2009 EUCLID/HITACHI EH1700-3

13,908 Hours; Cummins 1205 HP engine

2006 MOXY MT41

4,573 Hours; Scania DC12 Diesel Engine

2006 MOXY MT41

5,569 Hours; Scania DC12 Diesel Engine

2009 KAWASAKI 95ZV-2

17,893 Hours, w/ Counterweight & Bucket

2012 KAWASAKI 95Z V-2 642 Hours, 7yd3 Bucket

2008 KAWASAKI 95ZV-2

22,055 Hours; with Counterweight

2006 MOXY MT41

2002 CATERPILLAR 375MH

315 Hours, 12 Month/1500 hr. Warranty

2011 KAWASAKI 115Z V-2

2011 KAWASAKI 70TMV-2

5,687 Hours, Cummins QSK19 T3

2008 DOOSAN DL300

1,072 Hours; 3.2yd3 Bucket

2006 MOXY MT41

3,984 Hours; Scania DC12 Diesel Engine

8,099 Hours; Scania DC12 Diesel Engine

2005 GEHL SL7810

2000 EUCLID/HITACHI R60C

Perkins 1104C-E44T engine

361 Hours; Cummins QSK19-C700

Howell Tractor & Equipment 480 Blaine Street, Gary, IN Call Tom Ellis today at

219-810-6327

or visit us online at

2000 KAWASAKI 115ZIV-2

8,466 Hours, 3406DI ATAAC Diesel Engine

www.howelltractor.com

2,303 Hours, with Bucket

2007 DOOSAN DL250A

1,443 Hours; Dealer owned since new

2006 MOXY MT41

2013 SENNEBOGEN 860M New Paint, 25KW Generator K18

2009 KAWASAKI 95ZV-2

18,738 Hours, with Counterweight

2006 MOXY MT41

4,485 Hours; Scania DC12 Diesel Engine

2006 MOXY MT41

6,173 Hours; Scania DC12 Diesel Engine

4,677 Hours; Scania DC12 Diesel Engine

2000 EUCLID/HITACHI R60C

1997 INTERNATIONAL PAYHAULER 350C

7,059 Hours; Cummins QSK19-C700

4,682 Hours; All Wheel Drive