Published Nationally
$3.00
®
Midwest Edition
February 6 2021 Vol. XVII • No. 3
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com
Inside
Kenny Nichols: The Oldest Dozer Operator...8
Easing EasingMissouri/Arkansas Missouri/Arkansas Border BorderBottleneck Bottleneck
Komatsu, Proterra to Develop All-Electric Equipment...22
MoDOT photo John Deere Rolls Out New Tiering Strategy...58
Equipment being used on the job includes D9, D10 and D11 Caterpillar dozers; 745C and 775F Caterpillar haul trucks; a 651E Caterpillar earth mover/scraper; 825C Caterpillar compactors; and 349E Caterpillar excavators.
By Cindy Riley CEG CORRESPONDENT
Crews are working six days a week on a $70
Table of Contents ................4 million project that will complete the final 5 mi. Aggregate & Recycling Section ..........................29-43
of I-49 in Missouri between Pineville and the Missouri/ Arkansas border. When the I-49
Connector is completed, I-49 will stretch 290 mi. between Kansas City, Mo., and Fort Smith, Ark. “This is the last leg of Interstate 49 to be completed in Missouri,” said Steve Campbell, southwest district engineer, Missouri Department of Transportation (MoDOT). “Its completion will remove a freight and commuter bottleneck that
has existed at the Missouri/Arkansas border for several years. It will increase the safety of the corridor and shorten travel times for through traffic. This project has been on our list for many years, but funding has only recently become available.” see CONNECTOR page 78
Attachment & Parts Section ......................................59-63
Perplexing Policy
Truck & Trailer Section ........ ......................................69-76
Biden’s Executive Orders Has Construction Industry Concerned
Business Calendar ............81 Auction Section ............81-85 Advertisers Index ..............86
see story page 68
Page 2 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2016 Wirtgen W210i / $445,000
2009 Cat 140M / $170,000
2014 Cat 312E / $95,000
SN: 15201144 Hours: 1,792
SN: B9M00882 Hours: 5,209
SN: PZL00560 Hours: 3,701
2007 Cat 328D / $69,500
2007 Cat 345CLWVG / $69,500
2011 Cat 349E / $115,000
SN: GTN00181 Hours: 11,550
SN: ESD00227 Hours: 14,645
SN: TFG00402 Hours: 10,345
2016 Cat 430F2HT / $89,000
2012 Cat 980K / $169,000
2011 Cat D6NLGPIII / $85,000
SN: HWE00371 Hours: 1,234
SN: W7K01009 Hours: 10,657
SN: GHS00457 Hours: 9,426
636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 3
8 941-1900 815-9 150
EXCA C VATO ORS FOR SALE!
2018 Kobelco SK140SRLC C-5 .... $119,500
2018 Kobelco co SK85CS-3E ......... $64,500
2015 Kobelco SK210LC-9 ...... .. $89,500
17.5 rubber tracks, ks, 7’ stick, 8’ pushblade, aux hydraulics, mechanical quick coupler, additional counterweight, 18,700 lbs., 2,612 2 hrs., 0.99% for 60 Months. ...................................................................... ............................................. #KOB344
2017 Kobelco SK300LC-10E K300LC-10E .. $144,500
A/C,157HP, Tier 4 diesel, 31.5� pads, 9’ 9�� stick, 22’ dig depth, hand control 1-2 way auxiliary hydraulics, aulics, pattern control, 48,500 lbs., 3,714 hrs. ................................................................. ..... #KOB244
A/C, 252HP T4f diesel, 31.5� pads, 13’ 1� stick, 26’ 7� dig depth, hand control 1-2 way hydraulics, pattern changer, mechanical suspension uspension seat, 68,100 lbs., 2,875 hrs. ...................................................... .................................. #KOB312
2012 Kawasaki 90Z7 Loader er ....... $139,500
2015 JLG G12-55A 12-55A Te elehandler .. $99,500
2012 Cat M322D Wheeled ......... .. $125,000
A/C, 295HP, JRB hydraulic coupler A/C er, 4.75 4 75 yard bucket, F-R direct switch, 26.5-25 Firestone one tires, work mode switch, 2 lever, cold start, fan reverser erser, extra counterweight, heated TLV suspension n seat, 56,800 lbs., 4,596 hrs. ..................................................... #11070
A/C, 130HP Tier A/C i 3 diesel, di l 4WD, 4WD 12,000 lbs., 55’ reach, h ffrontt stabilizers, 72� x 72� carriage, front hydraulic coupler, 400/7528 tires, 3 mode steering, auxiliary hydraulics, work lights, beacon, 35,100 lb bs., 1,878 hrs. ...................... #ST190
A/C, Cat 6.6 173HP diesel, VA A boom, 9’6� stick, 21’ 7� dig depth, 11.00-20EM tires, auxiliaryy hydraulics, multi-function hydraulics, 4 outriggers, anti drift valves, adjust hydraulic sensitivity, roading ding pkg., pattern changer, 47,400 lbs. , 5,125 hrs. ........... .......... #11363
A/C, Cat C7 204HP Tie er 4 diesel, 34� pads, 10’ 6 6� stick, 24’ 3� dig depth, aux hydraulics, ydraulics, dual hydraulic circuit, hydraulic pin grab coupler pler, pattern control, cold weather start, 42� bucket, 2,298 8 hrs. ............................ #11243
2015 Kenworth T880 Tri Axlee Semi . $105,000
2018 Peterbilt 348 Wa ater Truck .. $117,500
2019 Kenworth T800 Teerex BT2047 Craane . $135,000
2020 Kenworth T800 Fassi assi Crane Mounted . $135,000
525HP T4 diesel, Eaton Fuller 18 speed, s air lift intermediate tires, Kenworth air glide suspe ension, dual lockers, double frame, sliding 5th wheel platte, A/C, power windows, locks & mirrors, cruise contro ol, heated mirrors, air 628 mi. ....... #11346 ride seat & cab, block heater, 257,6
300HP, Allison 300 00 RDS-P auto trans., 54,600 lb., GVWR, 14,600 lb. front, 40,000 0,000 lb. rear, 5.29 rear end, 202� WB, +HQGULFNVRQ VXVSHQVLRQ DLU EUDNHV LQWHUORFNLQJ GLႇ H[KDXVW brake, A/C , cruise e control, 2016 Curry 4,000 gal. tank, 4� x 3� SXPS IURQW VLGH UHDU GLVFKDUJH KRVH UHHO WRS ERWWWRP ¿OO sir valve controls. Cannon C ready., 37,789 mi. ...... #KOB305A
Te erex BT2047 Crane 20,000 lbs capacity, 47’ maximum reach, Greer Insight load system, 4 outriggers, ggers, dual steeriung boxes, Eaton Fuller 10 speed, Hendrickson MP-44-14X5 spring suspension, air ride cab & seat, block heater, oil heater, 1,535 mi. ................... ........ #N6824
Fassi F275A-2-23 Knuckle kle Boom Crane 17,637 lbs. capacity, 46’ maximum reach each high, 33’ maximum reach horizontal, Remote control, ol, 4 outriggers, Eaton Fuller 10 speed, Hendrickson MP-44-14X5 44-14X5 suspension, air ride cab & seat, block heater, oil heater, 1,002 mi. ............ #N6823
19.7� triple bar grousers with rubb ber pads, 9’ 4� stick, 19’ 4� dig depth, 1-2 way hydraulics, push blade, additional counterweight, work lights, belly pan, 33,800 lbss. 1,579 hrs., 0.99% for 60 Months ................ #KOB402
Warranty 3,000 hrs. or o 6/10/21
2014 Caterpillar 328D LCR ....... $174,500
sales@iltruck co sales@iltruck.co om • rental@iltruck k com • 320 Briscoe Drive, k.com Drive Morris Illino ois 60450
www.iltruck.com .iltruck com
Page 4 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
IN THIS ISSUE 12
KENNY NICHOLS: THE OLDEST CATERPILLAR DOZER OPERATOR
One particular day, some 84 years ago, seven-year-old Kenny Nichols was on an errand, walking a county dirt road in rural Missouri, when a man driving a Caterpillar Ten crawler came down the way.
12
KYTC HIGHLIGHTS BRENT SPENCE BRIDGE REPAIR EFFORT
50
TADANO ADDS ALTA EQUIPMENT AS AUTHORIZED DISTRIBUTOR
The Kentucky Transportation Cabinet recently released a time-lapse video recounting the six-week emergency repair effort to re-open the Brent Spence Bridge. The bridge closed following a truck crash and fire on Nov. 11, 2020.
Tadano has added Alta Equipment Company as an authorized distributor of Tadano all terrain and rough terrain cranes, as well as Demag all terrain cranes and Tadano-Mantis telescopic boom crawler cranes, in Illinois and Indiana.
Construction industry associations are beginning to weigh in following the inauguration of President Joseph R. Biden Jr. as the 46th President of the United States on Jan. 20, 2021.
The Volvo Group’s new business area, Volvo Energy, will strengthen the business flow of batteries over the life cycle as well as the customer offer for charging infrastructure.
Proterra and Komatsu announced an agreement to leverage Proterra’s battery technology for the development of Komatsu’s first battery-electric middle-class hydraulic excavator.
Developed in response to evolving customer needs and expectations, John Deere launched its Performance Tiering Strategy, delivering a range of products at different levels of capability and user experience.
Takeuchi-US has promoted Shay Klusmeyer to divisional manager. Formerly Takeuchi’s central midwest regional manager, Klusmeyer will now lead Takeuchi’s regional business managers and regional product managers.
NTEA announced the formation of the Fleet Advisory Council, composed of innovative and forward-thinking fleet leaders who will provide perspective and guidance on Association resources for the work truck community.
ASV Holdings Inc., a manufacturer of all-purpose and all-season compact track loaders and skid steers, continues to expand its dealer network in the United States with two new dealers and one new dealer location in Q4 of 2020.
Mack Trucks dealer Kriete Truck Centers announced its acquisition of Scaffidi Truck Centers, adding two locations to Kriete’s footprint. The two dealerships acquired by Kriete are located in Stevens Point and Tomahawk, Wis.
Bituminous Roadways Inc. (BR), a Minnesota asphalt contractor, will celebrate 75 years in business this year. The company, which began with a three-man crew in 1946 and has grown to more than 200 employees has much to celebrate.
Aspen Equipment announced that David Phillips will be joining the company as the truck equipment territory manager for Iowa and Nebraska. Phillips brings more than 10 years of experience to the position.
16
EQUIPMENT MANUFACTURERS PLEDGE TO WORK WITH NEW ADMIN.
22
KOMATSU, PROTERRA JOIN TO DEVELOP ALL-ELECTRIC EQUIPMENT
26
TAKEUCHI PROMOTES SHAY KLUSMEYER TO DIVISIONAL MANAGER
46
DEALERS IN CO., PA., MINN. JOIN ASV’S GROWING NETWORK
46
MINNESOTA’S BITUMINOUS ROADWAYS CELEBRATES 75 YEARS IN BUSINESS
Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.
Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz
www.constructionequipmentguide.com
46
54
58
70
72
76
VOLVO GROUP CREATES BUSINESS AREA TO ACCELERATE ELECTRIFICATION
JOHN DEERE ROLLS OUT NEW PERFORMANCE TIERING STRATEGY NTEA FORMS FLEET ADVISORY COUNCIL TO PROVIDE GUIDANCE
KRIETE TRUCK CENTERS ACQUIRES TWO DEALERSHIP LOCATIONS.
PHILLIPS JOINS ASPEN EQUIPMENT AS NEW TERRITORY MANAGER
AGGREGATE PRODUCTION & RECYCLING SECTION
29 30 30 34
ADAMO UNLOCKS NEW EFFICIENCIES WITH SENNEBOGEN FLEET EDGE INNOVATE’S E SM186 OFFERS RANGE OF SCREEN BOXES
ROAD MACHINERY & SUPPLIES ADDS PETERSON TO EQUIPMENT LINE
MCCLOSKEY INTERNATIONAL UNVEILS RF80, RF80R MOBILE FEEDER STACKERS
DEPARTMENTS
81 82
BUSINESS CALENDAR COMING AUCTIONS
28 59 60 66 76
DOOSAN DX300LL-5 and DX380LL-5 Road Builders RANSOME ATTACHMENTS Black Splitter S2 800 HULTDINS Fixed Mount MG Grapple Saw MECALAC Two-Piece Boom for 6MCR, 7MWR Excavators FONTAINE Heavy-Haul Magnitude 60LCC Trailer
EQUIPMENT
Joseph S. McKeon
Kent Hogeboom
Ed Bryden
Patrick Kiel
• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas
• National Sales Manager
• Central and Eastern Indiana • Michigan • Ohio • Kentucky
• Iowa • Minnesota • Nebraska • North Dakota • South Dakota
Cell e-mail
Advertising e-mail production@cegltd.com
Mobile
29
For advertising rates Contact
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site
Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
To read these stories and many more, visit www.constructionequipmentguide.com
FEATURES
8
MIDWEST EDITION
YouTube
773/769-4090 312/953-0375 jmckeon@cegltd.com
Cell e-mail
315/866-1423 518/221-5159 khogeboom@cegltd.com
Cell e-mail
440/243-9690 440/865-0630 ebryden@cegltd.com
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
Contents Copyrighted ©2021, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from
Cell e-mail
952/353-1770 612/481-8557 pkiel@cegltd.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 5
V I S I T
Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers
2018 KOMATSU D61PXI-24
$219,500
2018 KOMATSU WA320-8
2016 KOMATSU D61PX-24
$189,500
2015 WIRTGEN W220
2011 WIRTGEN W220
$249,500
2016 KOMATSU D51PXI-22
2018 KOMATSU PC210LC-11 $179,500
2017 KOMATSU WA380-8
STK# KM20174 3,480 HOURS, DEFOREST, WI
STK# KM19412, 3,103 HOURS, CAPE GIRARDEAU, MO
STK# WG19030, 5,532 HOURS, SPRINGFIELD, IL
STK# KM20049, 692 HOURS, DEFOREST, WI
$159,500
2015 KOMATSU 931.1
$275,000
2016 KOMATSU PC138US-10 $114,500
2015 CAT 501HD
$210,000
2012 KOMATSU PC360LC-10 $109,500
$179,500
2018 KOMATSU D65PXI-18
$329,500
2018 WIRTGEN W120CFi
$429,500
$219,500
2016 KOMATSU WA500-7
$229,500
2019 KOMATSU WA480-8
$350,000
STK# KM19637, 1278 HOURS, DEPERE, WI
$CALL
STK# WG19010, 3,964 HRS, SPRINGFIELD, IL
STK# KM19657, 3,884 HOURS, DEPERE, WI
STK# KM19470, 1,219 HRS, BOLINGBROOK, IL
STK# VT19025, 7,957 HOURS, ESCANABA, MI
STK# CT20002, 5,743 HRS, DEPERE, WI
STK# KM19206, 1889 HOURS, BOLINGBROOK, IL
STK# KM19654, 8,317 HOURS, DEFOREST, WI
STK# KM20054, 2,302 HOURS, BRIDGETON, MO
STK# KM20047, 6,423 HOURS, SPRINGFIELD, IL
STK# WG20036, 724 HRS, MARENGO, IL
STK# ZECONS, 178 HOURS, SPRINGFIELD, IL
17 Roland Branch Locations in IL, IN, MI, MO, and WI
Used Sales (217) 789-7711
R O L A N D M A C H I N E R Y . C O M
Page 6 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Mark Kruepke • (630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com
View our complete Used & “Like New” inventory at McCannOnline.com
Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110 2019 Case 621G loaders available Low hours, warranty, financing available Call today for details
Case SSL's snow returns available Call today for details
2016 Case CX31, s/n NGTN61260, 450 2015 Leeboy 8510C s/n 122257, 2750 Hours, CAB w/Ac ,Rubber Tracks , Long Hours, Paving Width 8'-15', Heated screed, Arm, Tag Coupler, Blade ..................$31,800 Legend Screed System ....................$54,900
McHenry* 815-385-0420 Wauconda 847-526-9444
Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800 Schereville* 219-865-6545 2018 Carlson CP130, s/n 109DB8P, 520 Hours, Contractor deluxe package $179,900
2018 Toro Dingo 1000, S/N 40494786, 152 Hours, Bucket and Forks..................$29,900
2018 Takeuchi TB216, s/n 216101568, 450 Hours Rops, Tag Coupler, Blade, Aux Hyds, Rubber Tracks ..................................$24,500
2016 Takeuchi TB230, s/n 130001742, 325 Hours, ROPS, Tag Coupler, Blade, Aux Hyds, Rubber Tracks ..................................$33,800
McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.
Michigan Marne* 616-371-7250
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 7
GROVE RT855B – (’97), 55 Ton, 37' - 115' main boom and 35' - 60' of offsettable jib, 250 HP, C002337 ...$87,500
ROADTEC RX900 - ‘18, approx. 1050 hours, ROADTEC RP190 - ‘13, approx.. 6200 hrs. 12’6” drum, 24V night light package, ACE EZIV Carlson screed, Moba grade & slope conG&S, ext warranty ..............................$710,500 trols ......................................................$58,900
GROVE RT860B – (’99), 60 Ton, 9,120 hrs, C004493…$79,200
LIEBHERR R956 LITRONIC – (’19), AC/Heat, 2,095 hrs, C003914…$439,000 SAKAI R2H-2 - ’10 w/approx. 3850 hrs. antifreeze filled drums, #C002063............$39,850
PAVERS / ROAD WIDENERS BOMAG CR662RM - ‘15, 590 Hrs, Material Transfer w/Hopper, #C000763 ............$414,000 Midland SPD-8 - ‘19 w/250 Hrs, hyd. Variable strike-off, #C001697 ..........................$165,900 Midland SPR-6 - ‘18 w/700 Hrs, wash down, hyd. Variable strike-off, #C001737 ......$115,750 P.O.R. items may be on rent causing pricing and hours to vary.
BROOMS Roadtec FB100 - ‘16, approx.. 50 Hrs. Front mount, side-shift, A/C ............................$P.O.R.
MILLING MACHINES BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor......................................$174,000 BOMAG BM1200/35 - ‘15, 1150 Hrs, 4’ Drum, 3’ Also Available, Front Conveyor, #C000846 .... ..........................................................$298,000 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900 Roadtec RX-700 - ‘12 w/5000 Hrs., 7’2” drum, grade & slope controls, #C001978 ....$197,200
ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500
Large Selection of New & Used Equipment in Stock.
EXCAVATORS Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R.
CRUSHING AND SCREENING ASTEC GT104 - ‘17, 71 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ ..............................................................$P.O.R. ASTEC GT165 - ‘17, 390 Hrs, 5’x16’ Top Deck, 5’x15’ Bottom Deck, 10.5 Cyd Hopper, #C001250 ................................................P.O.R.
ROLLERS Sakai GW750-2 - ‘14, 691 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$99,950 Sakai R2H-2 - ‘09 w/approx. 2750 hrs. #C002062 ............................................$36,950 Sakai SW770HF - ‘17, w/930 Hrs, #C001144.... ............................................................$84,900 Sakai SW770HF - ‘17, 450 Hrs, 67” high frequency, #C001168............................$96,000 *Comes with any remaining standard and 3 year extended power train warranty.
Contact Chuck or Jason in Illinois
1-800-307-0221
crhodes@finkbiner.com jzeibert@finkbiner.com
www.finkbiner.com
MANITOWOC 10000A-1 – (’13), 100 Ton, 3,890 hrs, C000660...$619,000
AGGREGATE EQUIPMENT ASTEC GT205S, (’17), Triple Deck Crawler Mounted Screen Plant. #C003398............................................$CALL JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI FT4250CC, (‘11) Track Mounted Impact Crusher, #C003741 ................................................................$CALL KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL
CRANES GROVE RT650E, (’14) 50-Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$319,000 GROVE RT765E-2, (’14), 65-Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$339,000 GROVE TMS900E, (’05), 90-Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ..........................................$CALL
LOADERS AND EXCAVATORS: LIEBHERR L586, (‘18) Cair conditioning, Joystick steering/standard steering wheel, amber beacon, emergency steering pump, #C003370......................................................................................................................$408,322 LIEBHERR LH60M, (‘19) Cab elevator, Overload warning system, Generator 25kw, Control device for magnet kit, wheeled and joystick steering, Industrial straight mono boom 31'2", Industrial Stick, stick end sharply angled, 28'10", #C004008 ......................................................................................................................$795,000 LIEBHERR LR636, (‘18) 3.25cyd bucket w/teeth & segments. Front and rear aux. hydraulics for 4 in 1 bucket, winch or ripper. 3 year/6000 hour full machine warranty, #C001745 ....................................................$249,700 LIEBHERR A902 SPEEDER, (‘98) 10 x 20 Tires, 4 Outriggers, Aux Hyd, #C001293..................................$CALL LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R920 COMPACT LITRONIC, (‘18), w/Werk-brau pin grabber coupler, medium & high pressure aux. hydraullic circuits, pattern changer, #C003330 ............................................................................................$POR LIEBHERR R946LC, (’14), Long Reach, 60’ Reach at Grade, 2.15 yd bkt. #C000938 ................................$POR
Milwaukee, WI 1-800-236-6900 Fax 414-541-1892
Wausau, WI 1-800-242-7113 Fax 715-675-9748
Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753
For information on our in-stock equipment, contact Matthew Pehler at:
mpehler@amstate.com or mobile 1-414-719-8700 or 1-800-236-6900 Visit us at: www.amstate.com
Page 8 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Kenny: The Oldest Dozer Operator How His Love of Dozers Led to His Logging More Than 110,000 Lifetime Hours As a young boy, Kenny Nichols was no stranger to hard work. His dad passed away in 1934, when Nichols was four years old, leaving the youngster, his mother and older siblings to eke out a living from the land during the Great Depression. It meant long days and back-breaking work with few rewards. Beginning of Caterpillar Love Affair One particular day, some 84 years ago, seven-year-old Nichols was on an errand, walking a county dirt road in rural Missouri, when a man driving a Caterpillar Ten crawler came down the way. “The county had the machine. They were bringing it up the road from Cedar Grove to work on some hills near the Palmer Banks [near Jadwin, Mo.]. I was just a kid walking along the road. The driver stopped to give me a ride,” Nichols said. “And he let me drive it about a half a mile.” That brief encounter began Nichols’s lifelong love for Cat dozers.
said. So, Nichols began using his own dozer and working for himself. Through the years, he has worked on every type of job imaginable. From clearing land for buildings and roads, to moving dirt for stock ponds and lakes — you name it, and he has probably done it using a Cat dozer. Over the years, he’s owned only Cat machines and currently owns a D6C, a D6D and a Cat backhoe. When asked why he chooses
Cat machines, Nichols replied, “I wouldn’t have anything else. If you’re going to use heavy equipment, just get Cat — they’re dependable. And I think they’re prettier, myself. “I’ve dug so many new house basements around Salem, Missouri, — more than were dug with backhoes. And lakes — big lakes! It would take me a lot of time to tell you about all the jobs I’ve worked on,” he said.
Just Like They Took Care of Us Throughout the years, “Why quit something you like doing,” Kenny the Nichols family fared Nichols said. well, supported by Nichols’s extraordinary operator skills and passion for operating a dozer. But it’s the Nichols family’s love for each other and their Cat dozers that makes the story special. Kent Nichols, Kenny and Willadean’s son, explained, “You see, my mother developed severe Duty Calls Rheumatoid arthritis Little boys grow up, and when she was just 27. If Nichols did, too. He and his you had spoken to her on brothers continued working the phone, you wouldn’t to help support the family. In have known there was 1951, Nichols married the anything wrong with her. love of his life, Willadean She was always upbeat Stephens. Soon after, duty and positive — an etercalled, and the U.S. Army nal optimist. But her finsent him to Korea. Leaving gers were very contorted his young bride at home on from the arthritis. She her parent’s Missouri farm, As a young boy, Kenny Nichols was no stranger to hard work. wore a C-collar and was His dad passed away in 1934, when Nichols was four years in a wheelchair because Nichols served his country old, leaving the youngster, his mother and older siblings to eke she’d had both legs abroad for 13 months. But not everything about In 1951, Kenny Nichols married Willadean Stephens. out a living from the land during the Great Depression. amputated due to the being away from home was disease. without joy. During his service in dozer operator. Over the next few “Caterpillar is an important part Korea, Nichols ran a Caterpillar dozer. years, Nichols built a strong repuof our family’s story because all “I got to run one in the Army. It tation as a skillful operator known through the years, my dad took wasn’t in my MOS code, but we for his integrity and passion for care of Mom. He would get her up had the equipment over there to dig high-quality work. But he prein the mornings and get her set for trenches. The operators were tired ferred to work for companies that the day. If she had to go to the docand didn’t want to run them, so I owned Cat machines. tor, he would take her. This went Eventually, Nichols purchased said, ‘I’ll do it.’” Nichols said. “I on for years and years. His busihis own machine. got to run them a lot over there.” ness allowed him the flexibility to “The first dozer I bought was a take care of her, but those dozers Cat D6C in 1971. It belonged to a Homecoming made it possible. Had it not been Upon the young soldier’s home- man I was working for at the time. for those Cat machines being so coming in 1953 he picked up He bought a brand-new D6C and Upon the young soldier’s homecoming in 1953 he picked up where dependable and the whole where he’d left off — working as a offered to sell me his old one,” he he’d left off — working as a dozer operator. see KENNY page 83
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 9
Bomag BW211D-4, 84” Smooth Drum, #109698 .... ..............................$59,500
NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4 –GH18
JD 75G, Rubber Pads, Blade, Aux Hyd, #119713 .. ..............................$64,500
JD 850K, LGP, 168” PAT Blade, Winch, #116218 .... ............................$198,500
JD 750K, LGP, 34” Pads, 156” Blade, Ripper, #119716..............$139,000
JD 470GLC, 12’ 10” Arm, JD 245GLC, 9’ 7” Arm, JD 135G, 9’ 11” Arm, Hyd Hyd Coupler, #115624 ...... Thumb, #118868 ................ 36” Pads, Warranty, ............................$121,000 #118074..............$279,000 ............................$159,500
JD 410E, Tailgate, JD 410L, Cab, Air, 4x4, Warranty til 3/2022, Ext Hoe, #119048.............. #116045..............$209,000 ..............................$69,000
JD 210CW, 1 Piece Boom, JD 644K, Cab, Air, QC, JD 824K, Cab, Air, RC, JD 250GLC, 11’ 10” Arm, JD 310SL, Air, 4x4, Ext Blade, #110532 ....$99,500 3rd Spool Aux, #108584 .... Hyd Coupler, Hyd Thumb, Hoe Aux Hyd, #113908...... Warranty, #115224 ............ ............................$139,000 #120428..............$122,000 ............................ $79,500 ............................$169,000
JD 130G, 9’ 11” Arm, 28” Pads, Warranty, #109750 .. ............................$109,000
JD 650K, LGP, 28” Pads, 128” PAT Blade, #115240.. ............................$116,500
JD 672G, Low Cab, Air, JD 544K, Cab, Air, Coupler, JD 844K, Cab, Air, 14’ Blade, #102755............ #117132..............$126,000 Joystick, #113618 .............. ............................$129,000 ............................$159,500
Page 10 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Bobcat® L23 small articulated loader is small enough to fit in small lots, backyards and other tight jobsites.
New Bobcat T76 Track Machine with Diamond 60” Tree Cutting Head
New 15-ton E145, Bobcat’s Largest Excavator in Stock with full line of all Bobcat Excavators on site and ready to rent or own.
New Bobcat Commercial & Residential Mowers in Stock!
Largest Selection in the Midwest!
®
Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000
Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500
Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000
New In Stock Bobcat MT100’s
Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL
Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500
Authorized Bobcat Dealer
U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281
www.farmriteequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 11
NORTH DAKOTA TA Williston 701.577.1249 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Piedmont 864.704.1060 Columbia 803.791.0740 Charleston 843.414.1120 GEORGIA Buford 678.318.9500 Savannah 912.964.8079
IMPROVE YOUR EEFFICIENC EFFICIEN NCYY.
Macon 478.200.3300
Get jobs done faster with effficient Volvo compact wheel loaders. They provide all-around visibility, excellent stability and easy access to tight areas — pluss the L20H model just won the Highest Retained Value Award™ in 2019 by EquipmentWatch. Imp prove cycle times and your profitability with powerful, effficient Volvo compact wheel loaders. Contact your nearest Ascendum location today.
ascendummachinery.com ascendummachinery.c . om .c
Page 12 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KYTC Highlights Brent Spence Bridge Repair Effort The Kentucky Transportation Cabinet recently released a time-lapse video recounting the six-week emergency repair effort to re-open the Brent Spence Bridge. The KYTC closed the bridge following a truck crash and fire on Nov. 11, 2020, that damaged its decking and steel beam supports. The bridge re-opened on Dec. 22, 2020, one day ahead of the emergency project’s scheduled completion date. “We conquered a combination of factors that challenged our ability to complete this project on time, including a global health pandemic and winter weather, and still delivered on our promise to return a safe and sound bridge to the traveling public before the holidays,” noted KYTC Secretary Jim Gray in a statement. “Along with repairing the bridge, we also focused our attention on traffic management to maintain reliable connections for travelers,” he said. “Ensuring safe roadways is a partnership between KYTC and the public, and I appreciate everyone’s commitment and contribution to keeping our roads safe.” View video on constructionequipmentguide.com.
KYTC photo KYTC video screen capture
The 57-year-old double-decker cantilevered bridge carries both Interstates 71 and 75 traffic between the two states.
The bridge re-opened on Dec. 22, 2020, one day ahead of the emergency project’s scheduled completion date.
KYTC photo
KYTC photo
The KYTC closed the Brent Spence Bridge following a truck crash and fire on Nov. 11, 2020, that damaged its decking and steel beam supports.
KYTC Secretary Jim Gray announced Nov. 16 the awarding of a contract to Kokosing Construction Co. in Westerville, Ohio, to repair and reopen the span.
KYTC video screen capture
After inspecting the damage and performing advanced steel testing, engineers determined repairs to the span included replacement of a section of the upper concrete deck, plus steel beams known as stringers that support the deck weight.
KYTC video screen capture
Officials with the KYTC said the potassium hydroxide-fueled fire on the Brent Spence Bridge burned at temperatures up to 1,500 F, which, when extinguished and allowed to cool down, led to a scrutiny of the steel work at the accident site.
KYTC video screen capture
The U.S. Department of Transportation has authorized up to $12 million in emergency relief reimbursement funding for expenses related to the project.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 13
#73969, 2014 TAKEUCHI TS70R, CAB/AC, 550 HOURS ....................................................$31,500
#92964, 2017 TAKEUCHI TL8, CAB/AC, 800 HOURS ....................................................$38,500
#92880, 2018 TAKEUCHI TL12V2, CAB/AC, 200 HOURS ....................................................$64,500
#92975, 2017 TAKEUCHI TL12R2, CAB/AC, 1525 HOURS ....................................................$53,500
#92987, 2018 BOBCAT T595, CAB/AC, HIGH FLOW, 1,475 HOURS ..............................$42,500
#92946, 2006 DEERE 644J, CAB/AC, GP BUCKET, #92989, 2016 CASE TV380, CAB/AC, MULTI21,150 HOURS ..............................$44,500 PURPOSE BUCKET, 500 HOURS..............$49,500
#92977, 2012 CASE 580SN, CAB/AC, 4X4, EXTENDAHOE, 3,975 HOURS ..................$39,500
#92913, 2005 INGERSOLL-RAND SD77DX, 66 INCH SMOOTH DRUM WITH SHELL KIT, 2,450 HOURS ....................................................$36,500
#83096, 2008 KOMATSU PC138US-8, 4400 HOURS, BLADE........................................$69,500
#92926, 2013 KOMATSU PC490LC-10, 8750 HOURS, AUX HYD, QC ..........................$109,000
#92802, 2008 KOMATSU PC138USLC-8, 6,300 HOURS, RUBBER PADS, QC....................$55,500
#93006, 2008 CAT D6K LGP, CAB/AC, 6 WAY BLADE, 4900 HOURS ..............................$74,500
#92983, 2013 KOMATSU D65WX-16, CAB/AC, RIPPER, SIGMA, 6700 HOURS ..............$99,500
#92767, 2013 KOMATSU D65EX-17, SWEEPS, SIGMA BLADE, 4950 HOURS ................$125,000
#93024, 2002 KOMATSU D41P-6, CAB/AC, 6WAY BLADE, 5100 HOURS......................$36,500
Page 14 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS
OFF ROAD HAULERS
CRANES
Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,
BACKHOES
P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS
HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000
MISCELLANEOUS
(2) Balderson Broom Attachment for Cat IT Machines,
HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,
8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500
DOZERS
ATTACHMENTS
Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,
BUCKETS
22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000
Over 100 Excavator, Loader, Specialized &
MOTOR SCRAPERS
Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500
Grapple Buckets in Stock -Call For Your Needs FORKS
Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55
(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500
Prices Are Negotiable - At Your Inspection
Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS
All Equipment is Owned & Operated By
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500
ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 15
Page 16 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Call fo or our full line of tough ough used equipment! ment! )YHK 2LU[ ŕ Ž <ZLK ,X\PWTLU[ /V[SPUL ŕ Ž )6)*( (; ;:
Check outt additional used eq quipment at bobcatent.com tent.com P RE-OW N ED, E JOB R EADY EQUIPMENT QUIPMENT NOW A V A AILAB LE !
48" Bobcat Snow Blade, Fits 463, S70, MT50, MT52, MT55, & MT85, CN 121580 ....................................................................................$1,250
2015 Bobcat MT52 Mini Loader, 1200 hrs., Includes Ride On Platform and a New Bucket, CN 120517 ..................................$14,000
2019 Bobcat E35 Excavator, A40 Package, Long Arm, CN 113022.... ....................................................................................................$49,900
2017 Bobcat E85 Excavator, Cab Heat & Air, Thumb, CN 103755 ...... ....................................................................................................$64,500
2013 4:1 Doosan Bucket, 100.5�, 2.5 Cubic Yards, CN 89289 .............. ......................................................................................................$15,250
2014 HRV2000 Compactor, Fits 24-65 Metric. Ton Excavators, 24-42 GPSM, CN 90536 ..........................................................................$9,150
2014 DX350 LC-3 Doosan Excavator, 1350 Hrs, Includes Quick Coupler & Bucket, CN 86222 ..................................................$174,850
2015 DX225 LC-5 Doosan Excavator, 500 Hrs, Includes Quick Coupler, and Bucket, CN 94483..............................................$146,695
C i n c i nna n ti • Mt. Mt Orab • H illiard • R eyn oldsbu bu rg • Zan esville • L ex ing t o n • Lo uiss v ille
Equipment Manufacturers Pledge to Work With New Admin. Construction industry associations are beginning to weigh in following the inauguration of President Joseph R. Biden Jr. as the 46th President of the United States on Jan. 20, 2021. Association of Equipment Manufacturers Association of Equipment Manufacturers (AEM) president Dennis Slater congratulated President Joe Biden and Vice President Kamala Harris on their inauguration and pledged that equipment manufacturers will actively support the efforts of the new Administration to confront our nation’s many challenges, chief among them, ending the pandemic and ensuring a safe and rapid economic recovery: “On behalf of the equipment manufacturing industry, we congratulate President Joe Biden and Vice President Kamala Harris and express our sincere commitment in working with them to help unite our country after this historic election. “President Biden has pledged to revitalize U.S. manufacturing by building back better, and we look forward to working with him to fulfil that promise. Equipment manufacturers believe the best way to build a bridge
toward economic recovery is by putting policies ahead of politics and working together to lift everyone up and leave no one behind. “President Biden has laid out a positive and optimistic vision for our country, and we look forward to working with him and his Administration to mobilize the talent, grit and innovation of the American people to bring about a better, stronger and more prosperous America.� Associated Equipment Distributors Brian P. McGuire, president and CEO of Associated Equipment Distributors, issued the following statement: “AED and its members are eager to work with the Biden-Harris administration to put the United States on track for long-term economic growth that creates well-paying jobs and prosperity for all Americans. “The United States faces enormous challenges as the country continues to deal with a pandemic, economic uncertainty, and unrest, both at home and abroad. The obstacles may seem insurmountable, but I’m confident that with strong, bipartisan leadership we will emerge as a stronger nation.
“I encourage President Biden to find areas that unite Democrats and Republicans, such as providing long-overdue investments in our nation’s crumbling infrastructure and developing the next generation of skilled workers. The future prosperity of the United States hangs in the balance and equipment distributors are ready to play a vital role to ensure a robust and sustained recovery.� American Concrete Pavement Association Following the approval of a resolution pledging support and formally congratulating President Joseph R. Biden and VicePresident Kamala D. Harris, the American Concrete Pavement Association is expressing optimism the new Administration and the 117th Congress will deliver robust and well-funded legislation to invest in our nation’s surface transportation infrastructure. “We are optimistic about President Biden’s vision for infrastructure investment,� said 2021 ACPA Board Chair David Howard (of Koss Construction Co.). “While we appreciate the scope of past highway and transit bills, the perspective shared by many people in both the public and private sectors is that investment levels for more than 20
years have fallen critically short of the amounts needed to meet the current and future needs.â€? He expressed optimism in the President and Congress moving forward cohesively and quickly to enact legislation that will provide much-needed funding. “We support the proposed $2 trillion ‘Build Back Better’ clean energy and infrastructure campaign proposal and are encouraged by both the jobs creation and infrastructure investment aspects of the proposal. “With the passage of HR2 in the House last year, the 117th Congress has a considerable advantage in advancing legislation and gaining bipartisan support,â€? he said, adding, “There will necessarily be additions and refinements to the plan, but we are encouraged that the House-passed bill sets a positive course toward the President’s stated goals. “ACPA is ready and eager to provide the Administration with the concrete pavement industry’s expertise and advice regarding the development and implementation of highway infrastructure investment,â€? Howard said. 
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 17
USE S D EQUIPMENT .com
TRUSTED MACHINES FROM A TRUSTED DEALER. R
2017 CATERPILLAR 289D, ID# TUC0201, SN TAW06962, 3269 HOURS..........................................$36,800
2017 CATERPILLAR 279D, ID# TUC0266, SN GTL04707, 1959 HOURS ..........................................$41,300
2016 CATERPILLAR TL642D, ID# 7CR6220, SN ML800406, 1051 HOURS ..........................................$66,220
2017 CATERPILLAR 259D, ID# TUC0275, SN FTL12116, 2278 HOURS ............................................$39,900
2015 CATERPILLAR 416F2, ID# 5CR5802, SN HWB00300, 3040 H0URS ..........................................$57,480
2016 CATERPILLAR 349FL, ID# PGN0402, SN BZ200836, 5190 HOURS ........................................$186,250
2017 CATERPILLAR 735C, ID# PGN0653, SN TFJ00247, 3626 HOURS ..........................................$299,400
2019 CATERPILLAR 239D, ID# 9CR6821, SN BL903319, 799 HOURS ..............................................$45,100
2016 CATERPILLAR 299D2, ID# TUC0182, SN DX200632, 2616 HOURS ..........................................$48,400
2019 JOHN DEERE 325G, ID# TGU0050, SN 332555, 1607 HOURS ................................................................$39,900
2013 CATERPILLAR 140M2AWD, ID# PUC0258, SN R9G00273, 6610 HOURS ................................$139,450
2015 CATERPILLAR 120M2AWD, ID# TUC0097, SN R9W00176, 4081 HOURS................................$138,600
2017 CATERPILLAR 330FL, ID# RUC0161, SN MBX00564, 3573 HOURS ......................................$145,500
2015 CATERPILLAR D6NLGP, ID# HGN0619, SN PBA02615, 4503 HOURS ........................................$144,900
2014 CATERPILLAR CS64B, ID# RUC0170, SN C6400126, 2859 HOURS ..........................................$86,900
2014 CATERPILLAR D6TLGP, ID# SUR0021, SN KSB01629, 5875 HOURS ........................................$180,800
Page 18 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113
GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449
www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 19
Contact Rollie Aspenson (Used Equipment Manager)
at 608-220-1723 rollieaspenson@ brookstractor.com
See our entire used inventory at www.brookstractor.com Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 2019 JOHN DEERE 35G
2017 JOHN DEERE 670G LC
2018 JOHN DEERE 160G LC
2012 JOHN DEERE 250G LC
Stk #C96009, Cab w/ AC, Long Arm, 12" Rubber Tracks, 24" Bucket, Aux Hydraulics, Blade, Hydraulic Thumb, 338 Hrs .................. ........................$43,500 WITH WARRANTY
Stk #C95223, Cab w/ AC, 36" Pads, 13'9" Arm, CWRD, Quick Coupler, 80" Bucket, 3543 Hrs ............$399,000 WITH WARRANTY
Stk #C94573, Cab w/ AC, Cntrl Pattern Select, Medium-Long Arm, Sd Boom, Long Track, 28" Pads, Aux Hyds, Coupler w/ Bkt, 48" Bucket, 967 Hrs ....$169,000 WITH WARRANTY
Stk #C95387, Cab w/ AC, Long Arm, Standard Boom, Long Track, 32" Pads, Aux Hydraulics, w/ Bucket, 9937 Hrs ..$66,500
2005 CATERPILLAR 930G
2016 CASE 621F XR
2012 JOHN DEERE 410J
2018 JOHN DEERE 844K
Stk #C94675, 6321 Hrs, Cab w/ AC / 3 Spool / Aux Hydraulics / Quick Coupler / General Purpose Bkt, Forks, Used / On Lot ..$62,500
Stk #C95533, 2430 Hrs, Cab w/ AC, Ride Control, 20.5 Tires, High Lift Boom, New Radials, General Purpose Bkt ......$109,000
2016 NEW HOLLAND C328
2013 JOHN DEERE 450J
2013 JOHN DEERE 700K
2015 JOHN DEERE 333E
Stk #C94855, Cab Enclosure, A/C, EH Controls, Air Ride Seat, Aux Hyds, Ride Control, 2 Spd, Wide Rubber Tracks, GP Bkt, 78" Bucket, 1140 Hrs ..................$43,000
Stk #C94120, ROPS, Low Ground Pressure, 24" Pads, Power-Angle-Tilt, 115" Blade, 1546 Hrs..............................................$58,000
Stk #C94949, Cab w/ AC / Low Ground Pressure / 30" Pads / Hydrostatic Trans / Power-Angle-Tilt / 132'' Blade, 3370 Hrs ........ ................................................$119,500
Stk #C94439, Cab Enclosure, A/C, EH Controls, Air Ride Seat, Aux Hyds, Ride Control, 2 Spd, 84" Bkt, Reversing Fan, 1471 Hrs ..$43,500
2008 ETNYRE RF50TD3
2012 JOHN DEERE 250D-II
2018 JOHN DEERE 672GP
1988 CATERPILLAR 140G
Stk #C95089, Mechanical Folding Gooseneck, 10' Wide, 22' Bed, Air Brakes ......$25,000
Stk #C95775, 6517 Hrs, Cab w/ AC / 25 Ton / 6X6 / Tailgate ..........................$136,000
Stk #C94503-2, Cab w/ AC / 14' Blade / 17.50 Tires / All Wheel Drive / Push Block ...... ......................$259,000 WITH WARRANTY
Stk #C94625, Cab w/o AC, Tall Cab, 13' Blade, 14.00 Tires, Aux Hydraulics, Snow Wing, 3932 Hrs ..........................$59,500
Stk #U689760, 2643 Hrs, Cab w/ AC, Joy Stick Steer, Ride Control, Front Diff Lock, 29.5 Stk #C95406, 3972 Hrs, Cab/AC, 2WD, Extendahoe, Aux. Hydraulics, Allied Compactor, Tires, General Purpose Bkt............................ ....................$299,0000 WITH WARRANTY Allied Hammer, GP Bucket ............$34,000
We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.
Page 20 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 21
HULL’S Waupun, WI
IMPLEMENT We Do Rentals
Complete Inventory & Photos Visit:
www.hulls151.com
Contact Us:
(920) 647-7005
A Family Owned Business With Over 60 Years Of Selling Only Quality Used Equipment
2012 John Deere 250D II, A/C, 1468 Hrs, Tailgate, 23.5R25 - 70%, Clean! ..........................................$124,900
2014 John Deere 850K LGP, A/C, 14’ 6-way, New U/C! X-NICE! ..................................................................$139,500
2013 John Deere 644K, A/C, 4548 Hrs, JRB QC w/4.3 yd, 3rd Valve, Nice!......................................................$119,500
2014 John Deere 544K, A/C, 4550 Hrs, JRB QC w/3.5 yd, 3rd Valve, Clean! ................................................................$92,950
2016 Volvo L90H, A/C, 5346 Hrs, Hyd QC w/3.4yd, Ride Control, Nice! ........................................................$113,500
2014 Cat 930K, 5879 Hrs, A/C, 3rd Valve, QC w/ 3.5yd, Orig, Nice! .............................................................. $93,500
2004 Cat IT14G, A/C, 8461 Hrs, IT QC w/ 1.8yd Bkt, R/C, New Radials, 3rd & 4th Valves ................................$35,900
2011 Case 721F, A/C, JRB QC, 3.5yd Bucket, 3rd Valve, Ride Control, Tight! Super Sharp! ..........................$81,900
2011 Cat 930H, A/C, 6553 Hrs, Cat IT QC w/ 2.8yd Bkt, R/C, Nice!, Exceptionally Clean & Original!......................$84,900
2013 Komatsu WA380-7, 7724 Hrs, JRB 418 QC w/ 4 yd Bucket, Sharp! ........................................................$84,900
2012 Case 580SN, A/C, 1815 Hrs, 4x4, E-hoe, Ride Control, Pilots, Aux Hyds, Exceptionally Nice! ......................$54,900
2013 New Holland B95C, 1762 Hrs, A/C, 4x4, E-Hoe, New Rears, Pilots, Nice! ................................................ $45,900
2004 Cat D6R XW II, 10,015 Hrs, A/C, 6-way Blade, 75% U/C, Nice! ................................................................$92,500
2011 Cat 320DL, A/C, 4920 Hrs, w/28” Bucket, PAT Changer, 52” Bkt Available Very Nice! ....................$89,950
2012 John Deere 75D, A/C, 4521 Hrs, Very Nice! ..$51,900 Also Available” ‘03 JD 35G & 50G, Both A/C
2011 John Deere 750J LGP, A/C, 5986 Hrs, New UC, 13.5’ 6-way, Sharp! Pre Emmission..................................$89,500
2014 John Deere 450J LGP, 3861 Hrs, A/C, New HD U/C, 115” 6-way, NICE! ..................................................$72,900
2015 Cat D5K2 LGP, A/C, 4738 Hrs, 10'6" 6-way, 26”pads, sweeps & screens, 90% UC, Sharp! ............................CALL
1998 John Deere 770CH, A/C, 6530 Hrs, 14’ MB, 1400 R24’s, 2018 Kubota SSV75, A/C, 207 Hrs, Hydr. QC w/ 78” Bucket, Front Fenders (w/ Snow Wing + $2500) ................$62,900 Sharp! Like New! Warranty to 9/17/21 ....................$38,900 TRACK SKID STEERS 2017 Cat 277D, AC, QC, 2100 Hrs................................$41,500 2018 Cat 259D, AC, QC, 2400 Hrs................................$38,750 2018 Cat 249D, AC, QC, 1600 Hrs................................$38,950 RUBBER-TIRED SKID STEERS 2018 Kubota SSV75, A/C, 200 Hrs-Warranty! ..............$39,500 2016 JCB 260ECO, A/C, 1700 Hrs, HIgh Flow, Nice! ........CALL 2015 Gehl R220, Cab, 569 Hrs, Nice! ..........................$29,500
2013 SkyTrak 10054, Sharp! New Foam-Filled Tires, OROPS, Rotating Carriage ......................................$54,900
2012 Case 570N XT, OROPS, 4x4, 3996 Hrs, Hydr. Frt QC, Frt Aux Hyds, 7.5’ Scrapper, Nice! ..........................$39,500
2013 Case 586H, 4434 Hrs, 4X4, 6000 lb Cap, , Sideshift, 22’ Lift Ht, Clean! ....................................................$32,900
BOOMLIFTS 2012 JLG’s: 460SJ, 450AJ, 600S, 600AJ, T500 ..............CALL 2012 Skytrak 6042, Cab, 2800 Hrs ..............................$46,900 2012 Skytrak 6042, OROPS, 2000 Hr & 1200 Hr ..............CALL
Page 22 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Komatsu, Proterra Join to Develop All-Electric Equipment Proterra, an innovator in commercial vehicle electrification technology, and Komatsu, a global manufacturer of construction equipment, announced Jan. 25 an agreement to leverage Proterra’s battery technology for the development of Komatsu’s first battery-electric middle-class hydraulic excavator. The collaboration represents Proterra’s entry into the offroad vehicle market and the company’s first Proterra Powered battery-electric construction equipment. Komatsu will utilize Proterra’s high-performance battery systems for the development of a proof-of-concept electric excavator in 2021, before expected commercial production in 2023 to 2024. The Proterra battery system powering the electric excavator will feature high-energy density and fastcharging technology. Engineered and manufactured in the United States, Proterra battery packs leverage energy density and a customizable design to fit within a variety of vehicles. The packaging flexibility of Proterra’s battery platform will further enable the optimal placement of the batteries within the middle-class excavator and replace the need for a normal counterweight used to balance the excavator's hydraulic arm movements, according to the manufacturer. “As more communities embrace a zero-emission future, Proterra is excited to partner with Komatsu to develop battery-electric construction equipment,” said Proterra CEO Jack Allen. “Proterra’s best-in-class battery technology has been proven in 16 million miles driven by our fleet of transit vehicles. What’s working in our battery-electric transit vehi-
Komatsu will utilize Proterra’s high-performance battery systems for the development of a proof-of-concept electric excavator in 2021 before expected commercial production in 2023 to 2024.
cles on roads across North America can work off-road, too. We look forward to collaborating with Komatsu to deliver the benefits of emissions free, quiet Proterra Powered vehicles to more communities around the world.” “I am excited about the collaboration with Proterra, by which Komatsu will drive the electrification of construction equipment,” said Seiichi Fuchita, president, development division, Komatsu Ltd. Proterra Powered leverages Proterra’s electric vehicle technology and expertise to help commercial vehicle manu-
facturers electrify their vehicles. Proterra battery systems are utilized by OEMs to introduce 100 percent battery-electric vehicles, including electric school buses, coach buses, delivery vans and low-floor cutaway shuttle buses. In addition to reducing noise and air pollution, the design of Proterra battery packs offers an ideal application for an off-road, construction setting where safety and durability are of utmost importance, according to the company. Proterra said it designs its batteries with safety as a core guiding principle and all Proterra battery packs undergo rigorous testing to ensure they can withstand the toughest conditions. About Proterra Proterra is a designer and manufacturer of zero-emission electric transit vehicles and EV technology solutions for commercial applications. With durability and energy efficiency based on rigorous United States independent testing, Proterra products are designed, engineered and manufactured in America, with offices in Silicon Valley, South Carolina and Los Angeles. For more information, visit proterra.com.
Forestry Equipment Market Could Reach $17B By 2026 Rising incidences of wildfire across the world will have a major impact on forestry equipment market outlook over the next decade, according to a report by Global Market Insights Inc. Further, foresters and loggers are heavily dependent on these equipment to manage the task assigned to them. There are several machines designed specifically for specified tasks such as forest road construction, fuel treatment, logging and various other forest management activities. They are often called heavy equipment and are specialized machines that are purpose-built, designed and sized for the large number of forestry tasks. These equipment are often used to manage wildfire in forests as well as the wildlife and sanctuary to preserve the ecosystem in countries across the world. With the growing change in the climate due to heavy carbon dioxide emission, as well as some other factors, there has been an ostensible increase in the wildfire instances. They tend to consume millions of acres of land that destroy millions of homes for humans and animals alike. British Colombia had registered a fire across 100,277 hectares of Lutz Creek in August 2018, while a campfire in California
Growing construction activities supplemented by increasing disposable income in the Asia Pacific region has proven to be beneficial for forestry equipment providers. had burnt about 142,000 of acres of land in the same year. For the past decades, the United States has witnessed some of the largest recorded fires that poses a threat millions. Efforts to tackle these calamities will bolster forestry equipment market trends in the near future. Major industry players are involved in the development of more efficient forestry equipment and introduce innovative techniques that make performing tasks efficient and more effective. They also indulge in various activities that help them develop newer and improved products with collective resources and ideas. Canada-based Tigercat Industries had acquired the U.S. based Ragnar Original Innovation in 2019, that manufactures a multi-use machine used in forestry, con-
struction and recycling. Tigercat also will be adopting the latters Carbonizer product line that is capable of converting the processed and unprocessed wood debris into a product known as biochar, attracting major demand form forest departments. Similar acquisition efforts will impact global forestry equipment industry size. Recent instances like the fire that consumed half of the Amazon forest, as well as the Australian bushfire in 2019, had left innumerable animals either homeless or close to extinction. Forestry equipment was one of the things that was majorly required in such situations. The Forest Service, which is a part of the USDA, is planning to spend more than 50 percent of its main budget to control the wildfires that often occur in the country.
The infrastructure sector has been witnessing major demand for wood pellets and timber for construction activities of residential and commercial complexes. With growing urbanization and a steady rise in the disposable income at hand, there has been an escalating demand for wooden walls, roof and flooring designing in the living or working spaces. Growing construction activities supplemented by increasing disposable income in the Asia Pacific region has proven to be beneficial for forestry equipment providers as well. Wood pellets also include sawdust, peanut shell, saw shaving, straw and stalking among various others. They are used in industries as they help reduce pollution. Facilities are adopting CHP-models wherein these pellets will be playing a key role. They also are used for heating systems and hot water supplies as one of the best options for fueling the domestic supply. North America and Europe are the forerunners of wood pellet energy use as they have been exposing the product to notable applications, fueling forestry equipment demand to ensure a sustained pellet supply. For a sample copy of this research report, visit www.gminsights.com/request-sample/detail/4580.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 23
KANSAS CITY • JOPLIN • WICHITA TOPEKA • GARDEN CITY
All Work and No Play. 816-241-9290 www.VLPCO.com
SALES • PARTS • SERVICE
Meet the highway-class paver that works as hard as you do.
2016 Case SR270 Wheeled Skid Steer, EQ0005709 ............................................$42,900
2015 Case 580SN WT, Pilot Controls, 1180 HRS, EQ0004234, Kansas City, MO ......$79,000
BOMAG highway-class pavers are built for those long work days that start before dawn and go way past sunset. Like you, our pavers don’t rest until the job is done, and done right! Contact your local BOMAG Dealer to take your paving productivity to the next level.
bomag.com/us-en IOWA
KENTUCKY
MID COUNTRY WILSON EQUIPMENT CO., LLC. MACHINERY, INC. LEXINGTON, KY FORT DODGE, IA 859.254.6443 515.574.2302 www.wilsonequipment.com www.midcountrymachinery.com 2014 Case SR210, Mechanical H Pattern, 1,000 HRS, EQ0003198, Garden City, KS ........$31,850
2014 Case CX300C, 2010 HRS, EQ0003165, Kansas City, MO ..................................$174,900
ILLINOIS WEST SIDE TRACTOR SALES CO. LISLE, IL 630.355.7150 www.westsidetractorsales.com
KANSAS
2019 Case CX130D, 304.7 HRS, EQ0010984 ...... ............................................................$149,900
2015 Case 580SN Backhoe, 979.50 HRS, EQ0004326 ............................................$84,900
BERRY COMPANIES, INC. WICHITA, KS 316.943.4246 www.berrycompaniesinc.com ROAD BUILDERS MACHINERY AND SUPPLY KANSAS CITY, KS 913.371.3822 www.roadbuildersmachinery.com THE G. W. VAN KEPPEL CO. KANSAS CITY, KS 913.281.4800 www.vankeppel.com
2015 Case 821F, 2,434 HRS, EQ0004257, Kansas City, MO ..................................$198,500
2019 Case TR270, 23.7 HRS, EQ0009453, Kansas City, MO ....................................$48,900
NORTH DAKOTA TITAN MACHINERY, INC. FARGO, ND 877.886.7010 www.titanmachinery.com
MICHIGAN
OHIO
MIDLAND ENGINE, INC. MIDLAND, MI 989.631.4608 www.midlandengine.com
SOUTHEASTERN EQUIPMENT CO. CAMBRIDGE, OH 740.432.6303 www.southeasternequip.com
MINNESOTA SOUTH DAKOTA
ROAD MACHINERY & SUPPLIES CO. SAVAGE, MN 952.895.9595 www.rmsequipment.com
DIESEL MACHINERY, INC. SIOUX FALLS, SD (605) 336-0411 www.dieselmachinery.com
RUFFRIDGE-JOHNSON EQUIPMENT CENTERVILLE, MN 612.378-9558 www.rjequip.com
TRANSOURCE TRUCK & EQUIPMENT, INC. SIOUX FALLS, SD 605.336.2000 www.transourceusa.com
MISSOURI
WISCONSIN
ERB EQUIPMENT CO., INC. FENTON, MO 636.349.0200 www.erbequipment.com
MILLER-BRADFORD & RISBERG, INC. SUSSEX, WI 262.246.5700 www.miller-bradford.com
THINK THINK FURTHER. FURTHER. PARTNERING PARTNERING www.bomag.com FOR THE FUTURE.
Page 24 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
5920 North Lindbergh Blvd. Hazelwood, MO 63042 314-895-9500 www.patkelly.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 25
563-8 872-4 4112 112
Bellevue (Dubuque), ubuque), Iowa sales@jjjscheckel.com RENT OR
BUY!
2009 CA ATT D10T - $458,000 $4588,000 ,
RJG S#, 1 Owner since new w,, 8,300 hours h s on $683,000 $ Documented CAT Dealer Complet p e Rebuild, SS ripper pp r,, i i U/C U blade, Twin Twin tilt, tilt Well maintained, Likke-new U/C.
RENT OR
BUY!
2004 CA ATT D10T - $$350,000 ,
RJG Series, 23,037 hours, h 4,701 idle dle hours, hours Single S shank ripper pp r,, U blade with ttwinn Tilt. A/C, Heat. AT dealer d l maintained, Servicedd and ready to go. CAT
RENT OR
BUY!
2015 CA ATT D8TT - $295,000 ,
BUY!
2006 Komatsu PC800LC-8 - $36 $368,000 , 7,200 Original g hrs, Reputa p tion machinne, Straigh g t, 10”” SStick i k, 72”” Bucket, clean, original gi l. 11’1 11’10” B , Goodd U/C w/ tr k pads. 32”” track d Komatsu dealer tested & inspected.
RENT
OR
BUY!
RENT OR
BUY!
RENT OR
2013 CA ATT 329EL - $119,000 $ ,
loaded, Longg and Wide UC, Patternn changer g r,, Ex Excellent ll
condition, OOriginal paint. Rentt/L /Lease or Buyy..
RENT OR
RENT OR
BUY!
BUY!
1,850 Hours, 3 Year Year ppartss/labor Cat warranty. 7”” SStick, i k 66”” Bucket. 25’7”” Boom, 13’7” B 1 Ownerr,, Documented history,y, Super clean and nice.
RENT OR
BUY!
4,700 Hours, New 54”” buck b k 110’6” bucket, ’ ” Stick, S k Fullyy
2014 CA ATT D6T LGP L VP PA AT - $220,000 $ , 2012 CA ATT D6T D LGP VP PA AT - $$148,000 ,
6,400 total frame hrs, 1,861 aatt idle dl , only l 4,539 actual 5,873 Hours, 1,293 at idle. CAT AT Acc A ugr g ade d , AROO, O, GPS 8,500 Hours, 2,700 700 aat idle. CAT AT Acc A ugr g ade d , AROO, O, GPS oper p atingg hrs. SU Blade, MS Ripper pp r,, EErops, DDiff p , A/C, Diff steeerr,, VPPAAT 6-wayy blade pperr.. ready readyy. Erops p , A/C, A Diff steerr,, Good G d undercarriage g. iff steerr,, ready. Erops b , MS ripper P i Service history since i new. Rent/Buy. SStraight /Leease or BBuyy.. Original, i l super clean O i i l Paint, Original h & clean, withh history. Rent/L lean machine machine. Rent/Lease or BBuyy..
2018 CA ATT 390FL,, A02851 - $68 688,,000 2018 CA ATT 390FL, A028119 - $628,000 , 2018 CA ATT 374FL, A02859 - $58 $588,000
RENT OR
BUY!
BUY!
BUY!
3,100 Hrs, 2 Year Year par p ts/labor /l Cat warrantyy. 27’ Boom, B 5,780 Totall hrs, h 1,550 at idl idle. 2 Year Year e par p ts/labor /l b CCat 6”” 8 Yar ight. 27’ Boom, 11’2”” Stick S , 96” Yardd bucket. 1 Ownerr.. EExcellent Ex U/C. Warrantyy remains. 1 Ownerr.. Super p straigh Full documented history,y, as nice nic as they come. 14’ Stickk, 77”” Bucket, B Aux hydrau li EExcellent U/C. d lics,
RENT OR
RENT OR
2017 CA ATT 374FL 3 - $48 $488,000
RENT OR
RENT OR
BUY!
((2)2015 ) CA ATT 982M’’s - $258,000 , EA.
BUY!
2015 CA ATT 980M 9 - $258,000
77,800 800 Hours, H Agg Aggrega g te handler dl additions. dd 1 Ownerr,, Agg ggrrega ega g te handler pa packkage g , 6,200 Hours, 1 Ownerr,, bbb r,, OOn boaarrdd scales, d l rubber bb r,, 7.5 7 5 yardd GP bucket. Ride control. Good radial rubber sc Ride control. Goodd radial Full documented history,y, as nice nic as they come. Full history,y, as nic nice as thhhey come. Rent/Lease or Buy.
RENT OR
RENT OR
(2)2014 ) CA AT 740B’ AT 740B’s - $238 $238,,000 EA. 66,500 500 Hours, H , Original g paint, Service hist history,y, o k or Oil samplees, FFullll work order complet p ed. Goodd tires, W ready. Rent/Lease or Buy. i Work
OOTH DRUM ROLLERBLADES HOLMES SMO
BUY!
BUY!
2012 Komattsuu PC800LC-8 PC80 - $388 $388,000
4,445 Hrs. 2 Year par p ts//labor CAT AT w warrantyy. 26’ Boom, Reputa p tion 1-ow wner machine, Full historyy since new, i Full 400 Total e paint.11’ 11’10” 0” SStick. 13’7”” Stick, S k Super p cllean 1 owner condition, 10,0,400 T hrs, Straigh g t, clean, frresh esh service history andd oilil samples. l Rent/Lease or Buyy.. Quick couplerr,, 66”” Bucket, B k New track pads. a k groups, 36”” pads
NEW! Ready to sh hip!
(4)2014-2015 ) Volvo A440G’s $228,000 ,000 - $24 $248,000 , EA. $228
(4)2013-2016 ) CA ATT 740B’s 740B’ $168, $188,0 ,000 EA. $168,00 000 - $188
2006 CA ATT 825H H - $338,000
B POWERTRAIN PLUS REBUILDS
POWERTRAIN PLUS REBUILDS
ONVERSIONS HIGH REACH CO
800 Hrs on CAT-dealer l comppplet l e po p wertrain rebuildi n. EExcellent ll feet. Original g , torqque, transmisison g 5,600-7,600 hrs, h Original g l paint, Excellen E ll nt radial d tires, 11,500 Hours, Dealer D maintained, d, SService hhistory,y, Oil O engine paint. i Tilt blade, bl Excellent!! Rent/Lease or BBuy. Factory tailgates, 1 ownerr.. RRent/Leaase or Buyy.. samples, Full work order done. Goood tires, Tailgates.
2015 CA ATT 627K 627K6 $288,000 $288
Holmes 11F - $23,00 , 0 / 16F - $29,000
CK CONVERSIONS ATTER TRUC WA
ATTU EXTREME DUTY DISKS A TTA
2 Models, 11’’ or 16’’ cutting i g width. Made in i Iowa. 9,100 hours, Just inn from original g ownerr,, PPush Construction gradde, extreme e ddutyy. FFor hhaull road & site 33 25 29 Rubber R Pull, Original g painnt, 33.25+29 r,, Full F di prior to rain event. documentedd hi history, under dealer care since new. leveling, compaccting & sealing dirt
NEW!
2006 CA ATT D10T Rebuild In n Process - $785,000. Zero hour Powertrain Plus, OEM CAT Warranty. New undercarraigge g , U Blade, SS Ripperr,, Pre-emissions! Available M March/2021
2007 CA ATT D8T Poweertrain Plus Rebuild - $$388,000 , 0 Zero hours on
Powertrain w// 3yr/5,000hr y / , h OEM CAT warranty. New U/C. Pre-emissions blade Multi Shank Riipper. i i , SU bl d ,M
WE OWN WHA ATT WE W ADVERTISE!
Ready to ship!
2017 CAT 349FL UHD U - $458,000 Custom Water Truck Conversions - 4 Models - $32,000 - $42,000 EA. Zero hours on custom Ultr Ul a--High H h Reach High R h Demolition l $100 - $200,0000. 8,000 & 9,000 Gal. tanks IN 12’6” ’ ” or 9’6” ’ ” cutting width, d h 32”” or 40”” Bllade d ddiameters. Conversion. 96’6” Total reacch, h Quick i k attach boom & STOCK STOCK for allll makkes off 440 & 45 Toon trucks. Built on your Massive bearin i gs, Extreeme construction duty, Take a close look! Thhe highest quality you will find! lines, Hydraulic tilt cab, Highest quality pkg. truck chassis or ours. Highest quality pkg at a great price!
visit
JJJScheckel.com
foor detailed photos, videos, and descriptions! 3, or 6 Month Contracts. R Options. WE RENT! 1,1Rent/Purchase
call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com | follow us ffor @jjscheckel.com orr daily updates:
Page 26 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Takeuchi Promotes Central Midwest’s Shay Klusmeyer to Divisional Manager
2006 Kobelco SK250LC 9350 hrs, New undercarriage, New 48" bucket & bucket pins/bushings $56,000 618-435-2330 Benton, Illinois WWW.BRTRACTOR.COM
CUSTOM MADE PRODUCTS Scrapers, Rollers & Graders
For Sale & Rent SIXTEEN LOCATIONS IN IOWA, NEBRASKA, & WISCONSIN
CALL ANYTIME 24/7
515-332-1875 Visit our website @ www.gncmp.com
Takeuchi-US has promoted Shay Klusmeyer to divisional manager. Formerly Takeuchi’s central midwest regional manager, Klusmeyer will now lead Takeuchi’s regional business managers and regional product managers as they support dealers and customers in the company’s west, southwest, central midwest and midwest regions. “Since joining Takeuchi in 2019, Shay has demonstrated exceptional leadership and relationship-building skills,” said Henry Lawson, director of sales of Takeuchi-US. “His enthusiasm and motivation have also served him well throughout his sales career. We’re confident in Shay’s abilities to lead our business and product manager teams to even greater success throughout their regional territories.” Based in Perry, Okla., Klusmeyer came to Takeuchi in 2019 as a business manager for western Illinois, Missouri, Kansas, Oklahoma and West Texas. In 2020, after a realignment of regions, he became the regional business manager for the central midwest. Before joining Takeuchi, Klusmeyer was a regional business manager of Mahindra Americas where he oversaw the development of various product lines. “I’m very proud to be a part of the Takeuchi family, and I’m ready to put my skills to work in this new position,” said Klusmeyer. “I’m looking forward to sharing what I’ve learned during my tenure in this industry to help our regional managers continue to provide top-notch support to Takeuchi dealers and customers.” Shay Klusmeyer For more information, visit www.takeuchi-us.com.
Gov. Holcomb Announces Next Steps in Development of I-69 Ohio River Crossing Gov. Eric J. Holcomb announced that the Indiana Department of Transportation will take the next steps to advance development of an Interstate 69 crossing over the Ohio River near Evansville. The state has identified a preferred route alternative in partnership with the Commonwealth of Kentucky that will include a new, four-lane tolled Interstate 69 bridge over the Ohio River and retain one of the existing U.S. 41 Ohio River bridges to support local traffic. The remaining U.S. 41 Ohio River bridge will be non-tolled. “Our globally recognized transportation network and prime location make Indiana one of the most attractive places in the U.S. to do business,” Holcomb said. “Advancing the I-69 Ohio River Crossing as we finish construction of I-69 between Evansville and Indianapolis further enhances our connectivity regionally
and nationally. Our progress on this transformational effort sends a strong message to job creators that Indiana will continue to offer best-in-class infrastructure for generations to come.” Selection of the preferred alternative
route allows for publishing of a final environmental impact statement and record of decision, both of which are expected in 2021. Kentucky and Indiana will share costs for the $1.5 billion design and construction of the project using a combination of toll rev-
enue and existing federal and state transportation funds. “As we finish construction of I-69 between Evansville and Indianapolis, Hoosiers are already experiencing the benefits of a faster, safer connection between southwest Indiana and our capital city and points beyond,” Indiana Department of Transportation Commissioner Joe McGuinness said. “Moving forward on the I-69 Ohio River Crossing brings those same mobility and safety benefits to motorists on a regional scale along with tremendous opportunity for private investment and job growth.” Construction on the I-69 Ohio River Crossing is anticipated to begin following the opening to traffic of I-69 Section 6 between Martinsville and Indianapolis in late 2024. For more information, visit in.gov/indot.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 27
Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Case 980B Excavator, 1:35 scale - $150
Caterpillar 226B2 Skid Steer Loader w/work tools, 1:32 scale - $50
Caterpillar 836G Landfill Compactor, 1:50 scale - $70
Caterpillar D7E Track-Type Tractor, 1:50 scale - $115
Michigan 320L Wheel Loader, 1:50 scale - $35
JCB 525-58 Loadall, 1:35 scale - $35
Komatsu WB140 Backhoe/Loader w/ Attachments, 1:50 scale - $85
Caterpillar 245 Excavator, 1:50 scale - $60
Volvo L35G Wheel Loader, 1:50 scale - $75
Volvo L60H Wheel Loader, 1:50 scale - $75
Caterpillar 1938 Panel Truck, 1:25 scale - $25
Bobcat 7753 Skid Steer Loader, 1:25 scale - $50
Caterpillar 160H Motor Grader, 1:87 scale - $35
Conexpo 2008 Silver Edition AEM Wheel Loader - $75
Shipping and Handling Included
Caterpillar 627G Scraper, 1:87 scale - $35
John Deere Dozer, 1:64 scale - $30
WE PURCHASE COLLECTIONS!!!
Bmckeon Collectibles
Contact – Barry McKeon
470 Maryland Drive Fort Washington, PA 19034
610-506-5961 Email – bmckeon9@gmail.com
Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Page 28 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Two New Road Builders Grow Doosan Forestry Lineup Doosan Infracore North America LLC extends its log loader product offering with the new Doosan DX300LL-5 and DX380LL-5 road builders. The DX300LL-5 and DX380LL-5 road builders are designed for use in forestry and logging applications. Within the forestry industry, they are operated in access road development, timber harvesting, log loading and mill work. The road builders are often the first machines on a site, used to build access roads or clear a path for other forestry equipment. Customers also can find uses for them in construction demolition or crushing tasks. These models are iterations of the current DX300LL-5 and DX380LL-5 log loaders. They provide a package designed to perform road-building tasks. Customers can carry out the tasks needed on a typical forestry access site with a complete product offering. Comfort, Power Due to the nature of work that the DX300LL-5 and DX380LL-5 perform, they offer exceptional power and operator comfort, according to the manufacturer. Operators can stay comfortable in the The DX300LL-5 and DX380LL-5 road builders are designed for use in forestry and logging applications. Within the forestry enclosed excavator cab or optional industry, they are operated in access road development, timber harvesting, log loading and mill work. forestry cab. A standard excavator cab simplifies machine transport due to its DX300LL-5 DX380LL-5 lower height. Extra cab guarding is available, further protecting the machine to reduce downtime. The road builders pair parts of Doosan log loaders and excavators for maximum efficiency and power. The models combine a log loader mainframe with an excavator boom and arm front configuration. Traditional excavator attachments are available to pair with the new road builders. Road builders and attachments can remove tree stumps and logs, and clear paths for access roads to the harvesting sites. Durability, Reliability The road builders also feature design elements to enhance machine durability and reliability. The DX300LL-5 and DX380LL-5 road builders’ undercarriages can forge across rough terrain. The high, wide undercarriage travels across exposed stumps, brush and forest foliage. Heavy-duty track links and fulllength track guiding guards increase undercarriage durability. Customers can monitor their equipment with DoosanCONNECT Telematics, so even in remote locations the Doosan equipment’s location and health are accounted for with satellite device communication. In addition, Doosan dealers can monitor their customers’ machines and respond to parts and service needs in a timely manner. Approved Attachments Since the road builder’s front configuration matches tradi-
tional excavators, customers can use any of the following Doosan excavator attachments. • Hydraulic quick coupler • Hydraulic thumb • Heavy-duty bucket • Severe-duty bucket • Ditch cleaning bucket DX300LL-5 Road Builder Specifications • Operating weight: 80,910 lb. • Horsepower: 271 hp • Maximum dig depth: 23 ft. • Maximum reach (ground): 34 ft. 3 in. • Auxiliary hydraulic flow: 65.5 gpm • Bucket capacity: 2.1 cu. yd.
• Boom length: 20 ft. 6 in. • Arm length: 10 ft. 2 in. • Overall width: 11 ft. 10 in. DX380LL-5 Road Builder Specifications • Operating weight: 106,483 lb. • Horsepower: 318 hp • Maximum dig depth: 23 ft. 6 in. • Maximum reach (ground): 35 ft. 8 in. • Auxiliary hydraulic flow: 95.1 gpm • Bucket capacity: 2.4 cu. yd. • Boom length: 21 ft. 4 in. • Arm length: 10 ft. 6 in. • Overall width: 11 ft. 11 in. For more information, visit DoosanEquipment.com.
Pages 29-43
Aggregate Production and Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
Adamo Unlocks New Efficiencies With Sennebogen Fleet Richard Adamo and his team feel a little irked that they did not bring purpose-built material handlers into their demolition business sooner than they did. Adamo is the third-generation president of Detroit-based Adamo Group, which has been a leader in the demolition industry for more than 50 years, taking on large decommissioning projects throughout the United States and Canada. But he still shakes his head ruefully at the days before he began building his fleet of Sennebogen material handlers to extract scrap metal from demolition debris and to load the material into trucks and barges. With the new equipment, Adamo has created a valuable new revenue stream, increased loading and logistics efficiency and even improved relations with landfill operators.
All of this used to be unrealized revenue to Adamo Demolition.
Unrealized Revenue Like most demolition contractors, Adamo was accustomed to using specially-equipped longreach excavators to tear down structures and then machines with a grapple followed up to pick through and load the debris for disposal. It was in 2004 that the firm first experimented with attaching a magnet to an excavator to pull out rebar and other ferrous scrap from the piles of rubble. “We were floored by the amount of scrap we were recovering,” Adamo said. At the time, he had a team working on an automotive factory project, with a large volume of metal in the structures. “Look at the recovery we can get — all this material we’ve been sending to the landfill, picked as clean as you can get it.” In one job, metal recovery added significantly in revenue to Adamo’s bottom line.
New Way of Maging A short time later, Adamo took advantage of an opportunity to acquire a used material handler and decided to “give it a shot at maging the site.” Maintaining that machine proved to be problematic. However, it demonstrated the advantages of replacing excavators with purpose-built material handlers. It was just a question of finding the right material handler for this application. This is when Alta Equipment, an equipment dealer in Michigan, connected Adamo with its Sennebogen line-up of material handlers. “I attended an open house at Alta and I saw an 821 M on their lot. I thought ‘That’s really cool. I’m really interested in that machine.’ It’s a good little unit; very mobile; it could suit a specific need.”
Adamo took down more than 1,400 homes in less than three months. Adamo describes that program as a unique project. “Each house is a job. It calls for significant resources for continual management. We had to move quickly and we able to get it done with no complaints from the neighbors.”
Support Adamo had two priorities in mind when he saw the 821: mobility and dealer support. With projects scattered across the country, the ability to transport equipment efficiently is a key point in planning. Larger sites also call for machines that travel quickly between work zones under their own power. And, as in any major project, reliability through long operating shifts is essential to meet deadlines. “Sennebogen made a great decision when they partnered up with Alta,” said Adamo. “The dealer support is through the roof. We have had no issues with downtime or parts availability. We rely on factory-certified technicians for all our equipment service. Alta works well with our dealers in other regions to give us a strong support network. We used to have our own certified mechanics on our staff but
they could only take it so far before they had to call the dealer. Now Alta supplies the techs as we need them through an ‘onsite’ labor agreement.” Mobile, Productive Adamo is just as pleased with the other machines that Alta has supplied. He purchased an 825 M soon after seeing his first 821, then larger 830 M models were added for new projects. “I’m pretty critical of equipment,” he said. “Our excavators were challenging at times to move. The 825 is night and day better.” Each of these models, up to the 830, can simply drive themselves on and off a lowboy to transport with greater ease, according to the manufacturer. The firm was recognized by the NDA for its work in Detroit to clear its blight of abandoned homes. At the peak of the program,
Effortless Reliability One 830 spent more than three years on a major industrial project in Muskingum, Ohio. “We had no problems in all that time — we learned something from that. Reliability is very high with Sennebogen.” “The effortless way the wheeled material handler works running on solid tires are certainly less troublesome than tracks to maintain. We leave the magnet on it rather than using an orange-peel grapple. This way, we avoid contaminating the various types of ferrous scrap in each load. Our biggest maintenance items, in fact, are the magnets. The way we use them, to sweep through piles means the ‘whips’ get frayed and need repairs. But there have been no major issues with our Sennebogen, just routine preventative maintenance at the regular intervals.” Bigger Machines for Bigger Jobs The fleet was expanded recently to include even larger material handlers. A Sennebogen 840 M was acquired for a power plant project in Ohio, where barge loading operations required a heavier machine with longer reach. The laydown area is located near the barge facility, a considerable distance from the demolished structures on the site. Using a 67 in. lifting magnet, the see ADAMO page 38
Page 30 • February 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Edge Innovate’s E SM186 Offers Range of Screen Boxes Edge Innovate’s E SM186 wheeled mounted screener is a highly efficient screening solution designed for the most difficult and demanding of applications including recycling, soils, aggregates, compost and demolition waste, according to the manufacturer. With increased throughput, high efficiency and quality end products, the Edge SM186 mobile screen incorporates a robust 18 by 6 ft. (5.4 by 1.75 m) two deck screen with interchangeable flip flow and conventional scalper bottom decks. This flexibility combined with numerous screen media options and configurations allows the Edge SM186 to process a wide range of materials and screening applications. Features include a low level feed hopper designed to accept loads from all three sides without the need of construction ramps; two- or three-way splitting configuration; hydraulic folding discharge conveyors to facilitate the quick transition from operation to transport; and a fully integrated power unit with large service access. A user-friendly control system with sequential start/stop functionality provides enhanced operational performance and unit safety. Fitted with a tri-axle bogie with an ultra underslung suspension complete with fifth wheel hook-up and air brakes, the Edge SM186 is easy to transport between sites with redeployment taking a matter of minutes, according to the manufacturer.
With increased throughput, high-efficiency and quality end products the Edge SM186 mobile screen incorporates a robust 18 by 6 ft. (5.4 by 1.75 m) two deck screen with interchangeable flip flow and conventional scalper bottom decks.
Operators can choose from a range of different screen boxes including Edge Innovate’s flip flow screen, scalping screen and rinser screen. Optional power sources include, diesel/hydraulic, diesel genset or direct electric.
Operators can choose from a range of different screen boxes including Edge Innovate’s flip flow screen, scalping screen and rinser screen. Optional power sources include, diesel/hydraulic, diesel genset or direct electric. The Edge SM186 also is available in a static chassis format. Signature Features: • Robust interchangeable 18 by 6 ft. (5.4 by 1.75 m) two-deck screen. • Choose between three different screen box types to suit your application. • Intelligent modular top deck system allowing numerous media types to be installed side by side including 3D screen media. • Screen-box jack up functionality allows for easy operator access. • A low level direct feed hopper facilitates side and rear loading via wheel loaders without the need to construct ramps. • Both side conveyors can be repositioned on any side of the machine to suit site requirements. • Fully mobile fifth wheel hook-up with hydraulic folding discharge conveyors enables quick and easy transport from site to site. For more information, visit www.edgeinnovate.com.
Road Machinery & Supplies Adds Peterson to Equipment Line Road Machinery & Supplies Co. (RMS) has expanded its coverage of Astec brand equipment with the addition of Peterson Corp. industrial wood grinders. The Peterson lineup caters to the tree care industry with grinders, chippers, flails, blower trucks, stacking conveyors and screens. RMS will be the Peterson distributor for Minnesota, Iowa and Nebraska. It also will cover Rock Island, Mercer, Henry and Henderson counties in Illinois, and Douglas and Bayfield counties in Wisconsin. “RMS has a proven commitment to product support and a loyal customer following. We are excited to continue their tradition of excellence,” said Brian Gray, VP of sales and marketing of Astec.
“This agreement allows us to deliver a more diversified product offering to our customers and opens us up to new markets,” said Andy Schwandt, RMS vice president, sales and marketing. “We are very excited to grow our partnership with Astec.” In addition to Peterson, RMS also is a distributor for Astec brands KPI-JCI, Roadtec and Astec Mobile Screens. Based in Savage, Minn., RMS operates nine locations across Minnesota, Iowa, Illinois and the Upper Peninsula of Michigan. It also has seven affiliated companies located in Minnesota and Texas. For more information, visit rmsequip- Road Machinery & Supplies Co. (RMS) has expanded its coverage of Astec brand equipment with the addition of Peterson Corp. industrial wood grinders. ment.com.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 6, 2021 • Page 31
www.aisequip.com m 33600 N Grand River Av Ave L i Lansing, MI 48906 48906 5177--321-8000
Sa aginaw 4600 46 00 AIS Drive Di Bridgepo ort, MI 48722 722 989-777 9897777-0090 0090 Grand Rapids Travverse City 600 44th Street SW 8300 M-7 -72 East G Grand Rapids, MI 49 49548 Williamsb burg, MI 4969 49690 231--2267 267-5060 616-538538--2400 West s Detroit Northeast Detroit 56 6555 Pontiac P Trail 65809 Gratiot Av Avenue New Hud dson, MI 4816 655 Leno ox x, MI 48050 248--4377--8121 586--7727 27--750 5022 800-4 457 57--8121
www.butlermachinery.c y com 3402 02 36th St SW Fargo, ND 58014 701--2280-3100 800--7726--77475 3630 Miriam Av Ave Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-4 45656-1400 1201 S 46th St Grand G d Forks, F k ND 58201 701--77 7775-4 4238
1505 Hwyy 2, Bypass E Minot, ND 58701 701-8 852-3508 4950 E High Highway 12 Aberdee en, SD 5774 401 60505--22 225-6 62240 3601 Deadwood Av Ave N Rapid City C , SD 57770 02 60505-34 42-4850 2-4 2057 0571 Tru uck Stop A Avve Pierre e, SD 57750 501 60505--22 2244-5400 3201 N Louise Av Ave Sioux Fa alls SD 5771107 alls, 605--336-3010
www.centralsands.co om 4219 E 50th St • Des Moines, IA A 50317 50 800--2247 47-2400 • 515-964-8 8600
www.rbscott.com 1011 Short St • Eau Claire, WI 54 47701 715-832-9792
A solution for every prroduction challeng p ge Metso Outotec has delivered dependable solutions forr demanding aggre egate applications the past 150 years, including crusher ushers, screens, feede ers, trackmounted and wheelmounted units, stationary naryy plants and „˜—’Â?„—Œ’‘ …•ˆ„Ž—‹•’˜Š‹–ě ‹ˆ Ť•–— ˆ—–’ ’Ž’—•„†ŽĹ?Ę Â?„‡ˆ Œ‘ ÄşĹ‚Ĺ ÄżÄ˜ Œ– still in n everyday use. Backe ed byy OEM spare and wear parts, maintenance and nd repairs, ˆ›—ˆ‘‡ˆ‡ š„••„‘—Œˆ– „‘‡ ‰˜Â?Â? Œ‰ˆ œœ†Â?ˆ ˆ•™Œ†ˆ–Ę šˆ —„Žˆ œ’˜• …˜–Œ‘ˆ–– personall o y.
www.roadbuildersmachine ery.com y 1001 S 7th St Kansas City, KS 913-371-3822 4115 S 90th St Omaha, NE 4022-331-9 92200
5601 Fle etcher Av Ave Linccoln, NE 40202-3325-044 477 4949 49 Ju Juer uergen Rd Grand Island, NE 308-3384--2620
1303 S Chestnut St Norfolk, NE 40202-316-4640
Learn n morre e at mogrroup oup.com today.
mogroup o .com
Page 32 • February 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
2021 Komptech Crambo 6000, Low Speed Shredder SR#TBD NEW CALL FOR PRICE
2020 Lippmann LTS-100 Tracked Radial Stacker, SR#90187, 755 Hrs $104,900
2020 BOSSTEK DUST BOSS DB-60 FUSION 60 METER DUST SUPRESSION, SR#2686, 8 Hrs $109,000
2011 MORBARK 3800XL WHEELED HORIZONTAL GRINDER, SR#191-1011, 2331 Hrs $359,000
2016 MORBARK 3800XL TRACKED HORIZONTAL GRINDER, SR#191-1057, 1857 Hrs $465,000
2018 MCCLOSKEY ST80 WHEELED 36”X80’ STACKING CONVEYOR, SR#89571, 95 Hrs $76,500
2019 MCCLOSKEY 516RE WHEELED 5X16 TROMMEL SCREEN, SR#89946, 764 Hrs $179,000
2021 McCloskey ST80T 36"x80' Tracked Stacking Conveyor, SR#TBD NEW CALL FOR PRICE
2021 McCloskey R155 Tracked 5x16 Heavy Duty Scalper Screener, SR#TBD NEW CALL FOR PRICE
2021 McCloskey 621RE Wheeled 6x21 Rotary Trommel Screen, SR#91583 NEW CALL FOR PRICE
2017 MCCLOSKEY I44V2 TRACKED 42”X43” IMPACT CRUSHER, SR#86917, 1526 Hrs $349,000
2020 MCCLOSKEY C2 TRACKED CONE CRUSHER, SR#90600, 657 Hrs CALL FOR PRICE
2021 Eagle Crusher 6x20 Horizontal Triple Deck Screen, SR#TBD NEW CALL FOR PRICE
2021 MCCLOSKEY S190-3DT RINSER, 5X20 – TRACKED 3 DECK RINSER TBD, NEW CALL FOR PRICE
2021 MCCLOSKEY S190-2DT 5X20 - TRACKED 2 DECK SCREEN, SR#91333, NEW CALL FOR PRICE
2021 MDS M518R Tracked Recycling Trommel, 5m x 1.8m Drum, SR#TBD CALL FOR PRICE
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 6, 2021 • Page 33
573-635-8700 • 888-972-2537 • www.rackersequipment.com
#141147-"NEW" RDO 5x12 2-deck screener with CAT C-4 water cooled engine. Remote control for feeder. Ball deck and grizzly hopper (no grizzly). 2-30" side discharge conveyors. #920000- 2002 Con-E-Co Mobile Central Mix Mounted on tandem axel 5th wheel chassis. Concrete Plant 300 TPH. Includes: 12yd agg batcher, (3) 60yd agg bins, mixer charging conveyor, 595 BLL split silo, cement/flyash batcher, PJ-500 dust control, (3) 30”x82’ portable conveyors.
#510113 (2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4892 hours) & HD-709 drifter (2203 hours). Set up for T-45 Steel (14′ starter & 12′ changes). Has anti-jam circuit and dust collector. One-owner machine and all service records available. Well maintained and in very good condition.
#154006 "New" Aggretek portable wash plant w/ 6x20 3-deck screen and twin 36"x25' sandscrews complete with electric motors, electric box and starters, wire cloth, and NiHard shoes, all on a 3-axle chassis.
#152028-(NEW) Aggretek 36 X 25 Single Fine Material Washer. with 15hp electric motor and includes Nihard shoes, adjustable legs, catwallks, stairs, guards, and operator platform. In-stock and ready for shipment.
Maximize your ROI
To get your best possible return on investment, highest productivity and longest equipment life, it’s important to use the right carrier with the right tool.
Before you buy or rent, rely on people you can trust. Allied Construction Products, with 78 years of experience, can guide you to the right hydraulic breakers – including our new Excellence and Performance Series models – and the right Ho-Pac® and Skid-Pac® compactor drivers. Because nobody delivers the right power, or the right features, like Allied.
#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.
Scott Scholz
Jeff Sharp
Rich Steinbrenner
#111070 Pioneer 2854 jaw crusher with 50x18’ VGF and electric motor all on a 3-axle chassis. Good condtion.
DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510116-Furukawa 15ED Hydraulic Rock Drill. Has twin Isuzu engines. 5667 hours on hydraulics, 4413 hours on compressor, and 5992 impact hours. Very good undercarriage. Enclosed cab w/ AC and heat. Dust collector, auto rod changer. Set up for T51 rod. Overall good condition. #510087-Furukawa 9E hydraulic drill with Isuzu diesel engine. 10764 engine hrs, 4619 impact hrs. Anti-jam circuit, dust collector, uses T-45 steel, 14 ft starter with 12 ft changes. Good condition. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.
#161007 New Willis 30"x60' radial stacker on 24" deep truss frame with 15HP electric motor and NBS #4 gearbox with backstop, Superior lagged head and wing-tip tail pulleys with Dodge bearings. 3-ply belt (US made rubber). Superior 4" CEMA C idlers, manual raise/lower and travel with pintle hitch and pivoted mounting plate.
JAWS & IMPACTS #111063-Terex Pegson 1180PT 32"x44" self-contained jaw plant w/ operator-controlled track maneuvering. Large feeder w/ step grizzly section, grizzly pass-by chute, & discharge conveyor. Plant is currently in use & has approx 5082 (04/21/17)hrs. Very good condition. #111071 Trio 12x52 portable jaw with 42"x16' vibrating grizzly feeder with 6' of grizzly. John Deere diesel engine with 1,208 hours. 36" underconveyor with magnet, all mounted on 3 axle chassis. #112007-Kennedy Van Saun 3648 single rotor impact with electric motor & Deister 50”x18’ VGF on 3-axle chassis. #112044-Nordberg LT-1213 Track Mounted Impact. with 42”x12’ VGF, 36” cross belt magnet, and 46” underconveyor, good condition.
#510115 Furukawa 1200ED hydraulic rock drill with 12,206 overall hrs & 3154 hours on Cummins 6.7 remanufactured engine. 5776 impact hrs but only 39 hours on drifter reseal. Includes cab with a/c & heat, dust collector and an anti-jam circuit. Good condition.
ALLIEDCP.COM | 800-321-1046
THERE’s NO SUBSTITUTE FOR EXPERIENCE #410070-CAT D6R dozer with 10' straight blade with good cutting edge. Has EROPS cab with air. Glass all good. 22" single grouser pads, overall condition of undercarriage is 60%. Pins have tit on drive side. Has 4600 hrs. SCREENS #141120-Nordberg 6x20 3-deck incline screen with ball tray on bottom deck. No motor, but was a running take out. Good condition.
SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hamEARTHMOVING mers and some new liners (not installed). 4 #810134-Euclid R-35 truck has an engine bar rotor. No power. Crusher is in good condithat is a Detroit diesel V12 with an Allison tion. 6-speed automatic transmission. The tires #121053-Cedarapids 5040 Hammermill secare 1800x33 all in good condition about 50%. ondary crusher with 5x16 3-deck screen. Bed liner looks good as does the remainder of Has rotovator, 36" return and 36" front disFEEDERS the truck. No leaks. Runs good. charge conveyors. All mounted on tandem 134001-Peerless 12 cubic yard hopper #810137 1977 Caterpillar 769B Rigid Frame axle chassis. Plant is all electric except the with 42 belt feeder (2015), 5hp electric motor Haul Truck with Cat D343 engine (10,314 hammermill is diesel jack shaft driven. No with electric panel in very good to excellent hours). 18.00-33 tires approx 50%. Bed is in power on mill. Power unit and control panel condition. good shape. Truck runs and operates good. are available separately for $12,000. Engine #132015-Continental Gin 48"x25.5' apron #410063-CAT D9H w/ EROPS cab w/ A/C, runs, but needs to be rebuilt. feeder. Large feed box. Flights are approx straight blade w/tilt. Single shank, 4-barrel #123025-Portable Telsmith 48" STD cone w/ 80+%, good sprocket, & jackshaft drive gears. ripper. 24" pads. U/C (overall approx 70%). 30" feed conveyor w/ 20 HP motor, Dodge 60hp motor and gear box, but has removable Rebuilt engine, trans, and finals (HMR 2994) TDT5 reducer, 36" undercrusher conveyor w/ mount (for transport). Heavy duty apron feed- Left Trunnion is available but needs to be WEG 20HP electric motor. Cone has 125HP 1150RPM motor, mounted on factory tandem installed. Overall good condition. er. Shipping dims: 8' 7" tall & 30' long.
Jefferson City, MO 65110
ALTA EQUIPMENT COMPANY www.altaequipment.com
HIGHWAY EQUIPMENT COMPANY www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391
844-GO2-ALTA 18405 115th Avenue Orland Park, IL 60467 1035 Wylie Drive Bloomington, IL 61705 420 Nolen Drive South Elgin, IL 60177 2500 Westward Drive Spring Grove, IL 60081 613 E Stevenson Road Ottawa, IL 61350 26354 N US Hwy 12 Wauconda, IL 60084 480 Blaine Street Gary, IN 46406
Page 34 • February 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
McCloskey International Unveils New RF80, RF80R Mobile Feeder Stackers
SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)
1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640
West Chicago, IL 630-293-0606
Mokena, IL 708-596-8050
Merrillville, IN 219-381-3006
Wauconda, IL 847-526-4255
www.atlasbobcat.com
Yorkville, IL 630-553-0150
1200 East Highway 13 Burnsville, MN 55337 952-894-0894
588 Outpost Circle Hudson, WI 54016 715-531-0801
71 Minnesota Avenue Little Canada, MN 55117 651-407-3727
www.tristatebobcat.com
The track mobility of the RF80 ensures the machine is versatile on site. When moving site-to-site, the RF80 can be compacted for transport on a low loader reducing costs and logistics.
McCloskey International has introduced new feeder stackers to its lineup — the RF80 and the RF80R. Versatile in its use across industries, the RF80 Feeder Stacker facilitates the handling and stockpiling of materials including, but not limited to, aggregates, coal, C&D waste, sand and gravel, topsoil and compost. All can be fed into the large feed hopper with large loaders and excavators, while variable speed prevents material from building up, allowing for more controlled flow of material. Both the RF80 and the radial RF80R stackers are designed for low level rear feeding, making them more accessible for various loader sizes. Rear feeding also can be advantageous in applications where space is constrained. The track mobility of the RF80 ensures the machine is versatile on-site. When moving site-to-site, the RF80 can be compacted for transport on a low loader reducing costs and logistics. Key Features of the RF80 include: • 127 hp (100 kW) Cat engine • Dual hydraulic main drive system • 4 m tracks for superior maneuverability and stability • Hydraulically adjustable discharge height up to 10 m • Fuel efficient Hydraulics system. • User Friendly Hydraulic Controls • 80 ft. long main conveyor with 40 in. wide belt • Hydraulic folding heading section
for transport, minimizing setup time. • Production up to 880 ton (800 t) per hour The RF80 also offers many options to align the equipment to the requirements of the owner/operator, including: • Complete remote functionality • Various hopper liners, including
Hardox • Head scraper upgrade • Full skirting on main conveyor • Various belt types available The RF80 is available in dual power and diesel/hydraulic. For more information, visit www.mccloskeyinternational.com.
Cincinnati, OH 513-874-8945
Reynoldsburg, OH 614-863-1300
Mt. Orab, OH 937-444-3865
Zanesville, OH 740-313-0087
Hillard, OH 614-876-1116
Lexington, KY 859-254-3936 www.bobcat-ent.com
Bobcat of Indy 2935 Bluff Road Indianapolis, IN 46225 866-442-3052
4489 S Indianapolis, Road Whitestown, IN 317-769-4946
2075 E CR 67 Anderson, IN 765-643-4222
2002 West 3rd Street Bloomington, IN 812-287-8042
www.bobcatofindy.com
The RF80 feeder stacker facilitates the handling and stockpiling of materials including, but not limited to, aggregates, coal, C&D waste, sand and gravel, topsoil and compost.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 6, 2021 • Page 35
EMPLOYEEE-OWNED EMPLOYEE-OWNED TTREES, BRANCHES, LIMB BS, AND STUMPS A NO MA ARE ATCH TCH FOR A BAN NDIT® F From roadways to right-of-ways, ways, lot clearing too road clearing, get your work ork done faster and m efficiently than ever before more efore with Bandit® m machinery! Choose from different ferent styles and sizes to suit your needs. Call today to reserve yours or to request a demonstra nstration.
INTIMIDAT ATO OR 15XP 115” Capacity p ity tyy Hand-Feed Chiipper pp
LARGE EQUIPMENT DEALERS THE BEAST 2460XP Trrack Horizontal Grinder
(The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)
Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255
M MODEL BT BTC-300 B Trrack Carri rie ier
M MODEL 3590XL Whole Trree Chipper W pp
IMPAK AKTO OR 250 Slow Spe Sp peed Shredder p
CHIP GRIN ND SHREED ED
BBAND ANDDIIT
675 667 750 Millbrook Rd. Rd • Remus, Remus MI 49340 • 1-800-952-0178 FIND US ONLINE WWW.BANDITCHIPPERS.COM
MODEL SG-75 Trrackk Stump S p Grinder Gi d
www.lec1.com
Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer
Page 36 • February 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
CRUSHING
MA ATERIAL TERIAL HANDLING HANDLING
SCREENING
TRACKS
WASHING W ASHING & CLASSIFYING
L
X
6
R
6WHSNH &W Traverse, MI 49 685 231- 943 - 3700 )D[
3RQWLDF 7UDLO 1HZ +XGVRQ 0, 48165 248 - 356 - 5200 )D[
2OG 6 *D\ORUG 0, 989 -731- 9988
( 0LOH 5RDG 6WHUOLQJ +HLJKWV 0, 0, 48312 586 - 474 - 5063
The complete sour s ce for equipment in the aggregate, construction ction and recycling indu ustries. Offering industry--leading brands such as the Pioneer Jaw Crusher, Kodia ak® Plus Cone Crusher, Supe erStacker® ® ® ® Extendable Stack ker, ProSizer Mobile Screening Plant, Combo Screen, Vari-Vibe a High-Frequency Scr S een, Duo-Vibe® High-F Frequency Screen, Series 90 000 equipment, Fast Trrax, Gllobal Trrack and FastPack.
www.kpijci.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 6, 2021 • Page 37
Illinois
Indiana
Kentucky
Minnesota
Midwest Crushing & Screening
Powerscreen Indiana, Inc.
Powerscreen Crushing & Screening
Theco, Inc.
7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com
847.271.5027
255 N. Hetzler Court Angola, IN 46703 www.powerscreenindiana.com
260.665.5816 • 800.843.4277
11901 Westport Road Louisville, KY 40245 www.powerscreensales.com
800.227.0534
14833 164th Ave. S.E, Big Lake, MN 55309 www.thecoinc.com
763.263.0505
Michigan & Ohio
Missouri & Kansas
AGGCORP
Powerscreen Central
22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net
9001 Hickman Mills Drive Kansas City, MO 64132 www.powerscreensales.com
614.309.6854
502.326.9300
Page 38 • February 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
FAE PT LINE: GET USED TO BEST IN CLASS
fae-group.com
(770) 407-2014 - info@faeusa.com
New Machine Increases Possibilities for Adamo Demolition ADAMO from page 29
840 loads off-road trucks with the recovered material, which delivers the scrap to the laydown area. Once enough material is accumulated, the 840 is driven to the river to fill the barge. When it’s not loading trucks, the 840 continues maging out the debris piles. According to Adamo, due to Sennebogen’s elevating Maxcab his operators also appreciate the visibility they get, looking into the barges. “I always get good feedback from the operators; they just raise the cab and go to work. The machine doesn’t stop.” Unexpected Rewards The maging application gets unexpected kudos from landfill operators as well. As Adamo explained, the concrete material from their projects is commonly used as “hard fill” to cover the service roads in landfill sites. However, scrap metals mixed into the waste frequently takes a toll in flat tires for trucks on those roadways. Since Adamo began cleaning metals from the debris it ships out, complaints about flats have gone down appreciably, he said. “Our biggest accomplishment, really, is segregating the metal to recycle,” said
The laydown area collected up the material and when ready, it all gets loaded on the barge.
Adamo. “We were among the first to use the magnets for sweeping and cleaning the piles. We are now getting paid for material that otherwise would have been a cost for tipping fees at the dump.” “We have been engaged with Sennebogen
and Alta now, for eight years and the experience has been great. Constantino Lannes [President of Sennebogen LLC] came to town a while ago and I was happy to tell him that Sennebogen is hands-down the best material handler in the market. They are all
outstanding units: durable, reliable; the dealer support is remarkable. As we grow our business and our fleet, we won’t go anywhere else.” For more information, visit www.sennebogen.com/en/.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 6, 2021 • Page 39
Continuing Education is FREE!! Adjoining the 100,000 sq. ft. US headquarters just outside Charlotte, North Carolina, is the home of the SENNEBOGEN Training Center.
PURP POSE-BUIILT
FROM THE T GROUND D UP
Here, service tech hnicians, parts personnel and machine operatorss receive expert hands-on and classroom training absolutely free.
The two service level courses are designed to build on each other. Ou ur trainers p provide instruction on proper mainten nance procedures and system troubleshooting. The operator familiarization course was created d to help operators maximize the machine’s cap pabilities using best practices GPS FĆŒDJFODZ BOE E TBGFUZ 5IF QBSUT USBJOJOH course teaches parts counter teams how to better understand d the parts manuals for their SENNEBOGEN matterial handlers. According to SEN NNEBOGEN, there is no fee for course atten ndance or course material GPS 4&//�(&/ / EFBMFST TUBĆ‹ BOE UIFJS customers. “Our objective is to create North America’s best-trrained service network and provide our custom mers with increased machine availabilityâ€?, said Constantino C Lannes, President of SENNEBOGEN LLLC.
Available T Trainin ng Courses • Serrvic vice Level 1 • Serrvic vice Level 2
See how SENNEBOGEN can purpose-build the right machine m for you
• Parts Training • Operator Familiarization
www.sennebogen s sennebogen -na com | +1-7044-347-4910 -na.c
BRANDEIS MACHINERY & SUPPLY COMPANY
ALTA EQUIPMENT COMPANY
GIBSON MACHINERY LLC
www.brandeismachinery.com
www.altaequipment.com
www.gibson machinery.com
Louisville, KY 502-491-4000
Stanville, KY 606-478-9201
Evansville, IN 812-425-4491
Paducah, KY 270-444-8390
Corbin, KY 606-528-3700
Indianapolis, IN 317-872-8410
Lexington, KY 859-259-3456
Ft.Wayne, IN 260-489-4551
Gary, IN Orland Park, IL South Elgin, IL Ottawa, IL Spring Grove, IL Wauconda, IL Bloomington, IL 844-GO2-ALTA
Cleveland, OH 440-439-4000
ROLAND MACHINERY CO. www.rolandmachinery.com Carterville, IL 618-985-3399 East Peoria, IL 309-694-3764 Bridgeton, MO 314-291-1330 Columbia, MO 573-814-0083 Cape Girardeau, MO 573-334-5252 Palmyra, MO 573-769-2056
Franksville, WI 262-835-2710 DePere, WI 920-532-0165 DeForest, WI 608-842-4151 Eau Claire, WI 715-874-5400 Schofield, WI 715-355-9898 Slinger, WI 262-644-7500 Escanaba, MI 906-786-6920
THE VICTOR L. PHILLIPS CO.
ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com
www.vlpco.com Kansas City, MO 800-878-9290
Savage, MN 800-888-9515
East Moline, IL 800-633-9114
Joplin, MO 800-878-8223
Des Moines, IA 800-555-1445
Duluth, MN 800-888-9535
Brookline Station, MO 800-955-2729
Cedar Rapids, IA 800-616-6615
Virginia, MN 800-752-4304
Wichita, KS 800-878-3346
Sioux City, IA 800-633-9104
Topeka, KS 800-878-4345 Garden City, KS 800-511-1435
Page 40 • February 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Yo our Source S f Sandvik for S d ik C Crushing and Sc Screening Equipment E
We ser serve all a of Wisconsin, Northern Illino ois, and Michiga an’s Upper Penin nsula We offer the full line of Sandvik jaw crushers, impactors, con ne crushers, screens, a and scalpers for qua arrying and rock e exca xcava ation projects. With sm mall footprints and trackked undercarriages, Sandvik machines lett you process aggregatte right on the jobsite, saving yyou the cost of ttransporting p g material to o a fixed site. Our dedicated crushing and screen ning sales and support rep is Marty Waldorf Waldo orf, and he is ready to help you find the bes st machine for your job.
Contact Marty Today! Today! Caall 608-419-0072 or Email mwaldorf@miller-bradford.com Wisconsin Sussex 800-242-3115
DeForest 800-585-7219
Eau Claire 800-585-7232
De Pere 800-638-7448
Marathon 888-886-4410
Michigan
Illinois
Negaunee 800-562-9770
Rockford 800-585-7231
www.millerr-bradfor -bradford.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 6, 2021 • Page 41
mhl 375 F -SERIES
COMPANY WRENCH www.companywrench.com 4805 Scooby Lane NW Carroll, OH 43112 866-262-4181 4510 East 71st Street Cleveland, OH 44105 440-439-4567 920 Deneen Avenue Monroe, OH 45050 513-649-8105
STRONG. RELIABLE. E EFFICIENT.
ERB EQUIPMENT COMPANY www.erbequipment.com 200 Erb Industrial Dr. Fenton, MO 63026 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484
Discover Morre Fuchs World- Class Material Handlers
© 2019 Terex Corporation. Fuchs is a trademark owned by Terex Corporation or its subsidiaries.
Page 42 • February 6, 2021 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 6, 2021 • Page 43
A WIRTGEN GROUP COMPANY A
THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN
EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america
WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600
www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716
Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky
Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757
Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083
www.rolandmachinery.com
Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399
Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080
DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165
Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898
Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711
East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764
Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920
Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400
Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500
Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330
Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474
Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966
DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151
Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710
Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252
Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056
Page 44 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hyundai leads the industry with great warranties and a trusted dealer network that will support you.
Midwest Alta Equipment altaequipment.com Orland Park, IL 708-349-8430 South Elgin, IL 630-883-3320 Wauconda, IL 847-469-0120 Buck & Knobby Equip Co. buckandknobby.com Ottawa Lake, MI 734-856-2811 CSTK cstkequipment.com Kansas City, KS 888-566-5743 Dakota Prairie Mandan, ND 701-805-8000 Diamond Equip diamondequipment.com Mt. Vernon, IL 618-242-2273 Evansville, IN 812-425-4428 Terre Haute, IN 812-299-4747 Bowling Green, KY 270-781-1061 Farm Depot farmdepot.biz Caro, MI 989-673-6172 Ionia, MI 616-522-5501 Schoolcraft, MI 269-679-3939 G W Van Keppel vankeppel.com St. Louis, MO 314-872-8440 Hardings Heavy Equip hardingsinc.com Lowell, IN 219.696.8911 Hayden Machinery LLC haydenmachineryllc.com Springfield, MO 417-855-7057
hceamericas.com
Highway Equip Co. highway-equipment.com Canton, OH 330-915-8391 J Gross Equip Inc. jgeinc.com Aberdeen, SD 605-229-4037 Klochko Equip Rental Co., Inc. klochko.com Fair Haven, MI 586-725-4860 Melvindale, MI 313-386-7220 Midland Engine midlandengine.com Midland, MI 989-631-4608 Reco Equip, Inc. recoequip.com Columbus, OH 614-276-0001 Monroe (Dayton Area), OH 513-539-5255 Perrysburg (Toledo Area), OH 419-874-6001 Richfield, OH 330-659-0800 Florence, KY 859-727-7970 Indianapolis, IN 317-781-8100
Rueter’s rueterco.com Council Bluffs, IA 712-366-5221 Grand Junction, IA 515-738-2571 Carroll, IA 712-792-9294 Elkhart, IA 515-367-3054 Osceola, IA 641-223-8171 Sioux City, IA 712-266-3832 Neligh, NE 402-917-5604 Team Boone teamboone.net Bardstown, KY 502-369-2475 Titan Machinery lacrosse.titanmachinery.com La Crosse, WI 608-788-1025 United Truck Sales utsmi.com Clinton Township, MI 586-630-0355 Yes Equip & Services yesequipment.com Milwaukee, WI 414-263-9001 Madison, WI 608-243-9253
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 45
READY TO OUT-WEIGH THE COMPETITION
Hyundai wheel loaders come standard with an auto-weighing system that weighs accurately to within plus or minus 1%. With better payload management, you can operate more efficiently and maximize profitability.
TOMORROWSEDGETODAY.COM
Page 46 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Dealers in Colorado, Pennsylvania, Minnesota Join ASV’s Growing Network ASV Holdings Inc., a manufacturer of all-purpose and all-season compact track loaders and skid steers, continues to expand its dealer network in the United States with two new dealers and one new dealer location in Q4 of 2020. ASV added Commerce City, Colo.based Hardline Equipment and four Highway Equipment and Supply Co. Pennsylvania locations. Existing dealer Quality Forklift also added Alex Power Equipment as its location in Alexandria, Minn. The new dealers and dealer locations are an indication of ASV’s quickly increasing presence in North America, according to the company. The dealers will offer ASV’s full line of Posi-Track compact track loaders, featuring best-in-class rated operating capacity, cooling systems and hydraulic efficiency. The line features the newly launched MAX-Series loaders, including the RT-65, VT-70 High Output, RT-75 and RT-75 Heavy-Duty. The new machines feature increased comfort, visibility and overall operator experience. The line-up also includes
BRANDEIS MACHINERY & SUPPLY COMPANY
ASV Holdings Inc. added new dealers and dealer locations in the United States in the final stretch of Q4 2020.
the RT-25, RT-40 and RT-50, and the RT-120 Forestry. The dealers also will feature ASV’s skid-steer loaders. “We depend on our dealers to not only sell our equipment, but also to represent the ASV brand in everything they do,” said Jeff Pate, director of
sales of the ASV brand. “We are excited to have found new partners whose values align with ours as we continue to expand customers’ access to ASV equipment.” For more information, visit www.asvi.com.
Minnesota’s Bituminous Roadways Inc. Celebrates 75 Years in Business Bituminous Roadways Inc. (BR), a Minnesota asphalt contractor, will celebrate 75 years in business this year. The company, which began with a three-man crew in 1946 and has grown to more than 200 employees during the 2020 paving season, has much to celebrate. “I am proud of the company, where we’ve come from and our future,” said Kent Peterson, BR CEO/president. “When I started as president of the company in 1996, we had two asphalt plants, now we have four. The company has seen a tremendous amount of growth throughout its history.” BR started in 1946 when Al Wendell began residential paving operations out of an asphalt plant in south Minneapolis. As the company grew, Wendell hired more estimators, including Palmer Peterson in 1958. Wendell and Peterson became fast friends, one might even say more like father and son. When Wendell passed away in the late-60’s, Palmer bought the company. Palmer’s son, Kent, worked at BR during the summer months throughout high school and even
into his college days. Eventually, Kent would be named president of BR in 1996 and has run the company since. The Petersons consider BR a three-generation, family-run company. Today, 75 years later, the company services mainly industrial and commercial customers throughout the Twin Cities metro area. Some of the more notable projects BR has been involved in are Target Field, TCF Stadium, Topgolf, TCO Performance Center/Minnesota Vikings and, more recently, the Omni Hotel. Bituminous Roadways Inc. has a mission of providing asphalt pavement solutions to its customers. Core competencies range from commercial asphalt production, installation, paving, repair and patching to concrete and cracksealing. Projects include roadways and highways; parking lots; trails and pathways; outdoor athletic surfaces; and more. The company’s corporate headquarters is located at 1520 Commerce Dr., Mendota Heights, Minn. For more information, visit www.bitroads.com.
www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551
ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606
GENERAL EQUIPMENT & SUPPLIES, INC. DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047
CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000
www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 47
ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114
3D AUTOMAT TION INCREASES ASES YOUR PRODUCTION N • Dig to grade accurately urately without slowing down wn • No worry grading because ecause there is no over diggingg • The machine ine you have been waiting for: r: Big, Fast, Accurate te
ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500
SUPP PORTED WITH PRIDE
Page 48 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Using Public Budgets Wisely...
Driving Technology Adoption On Infrastructure Projects By Gino Alberto AUTODESK CONSTRUCTION SOLUTIONS
This is an exciting time for DOTs. Prospective funding opportunities for infrastructure work present possibilities to explore new technologies that can help save time and money on construction projects. Autodesk recently held a webinar about how DOTs are innovating when it comes to infrastructure construction. Jesus Sandoval, construction liaison engineer of New Mexico DOT (NMDOT) and Dakota Clifford, e-construction lead of Virginia DOT (VDOT) spoke on several topics, ranging from championing innovation within a large government agency to creating, running and scaling pilot programs statewide. NMDOT: Field Collaboration, Document Management Sandoval provided an overview of a successful pilot project using tablets in the field — an ADA improvement project in Artesia, N.M., on U.S. 82. It included curb and gutter, curb ramp, sidewalk,
“Technology is intended to make the lives of the people using it easier. Give your people the tools to do their jobs and get out of their way.” Dakota Clifford Virginia DOT
driveway reconstruction and traffic control devices for pedestrians during construction in an urban area. From this pilot, NMDOT learned that an inspector was able to save nearly two hours per day by doing daily work reports in the field from a tablet. Additionally, the project was completed more than two weeks ahead of schedule. VDOT: Tablet-Based Inspections Virginia DOT piloted a mobile field collaboration technology for about 18 months. They identified eight teams in eight different districts, covering more than 50 projects and 75 participants. As part of
its research, VDOT studied the changes on job sites. “We saw project staff were taking an additional 16 photos per week, per person on the job, which is a huge boost to our ability to report on what’s happening and manage our documents,” said Clifford. The result not only shows that users were more engaged, but they were capturing valuable project data directly from the field. This type of data is valuable because it allows the DOT to make informed decisions quickly and can be included in digital as-builts at project-end. Starting in January 2020, VDOT
launched tablet-based inspections statewide. In late 2020, they had more than 300 active projects, about 450 internal users and more than 300 consultants and contractor users on board. Scaling for Broader Impact How can other DOTs scale similar technologies across their organizations? Based on what was learned from NMDOT and VDOT, the first step is piloting and user testing. By testing on a small scale, teams can gain valuable insights from users and identify the technology’s strengths and limitations. After user testing, focus on stan-
dardizing best practices. The teams Autodesk heard from created the foundation to scale their programs and identify champions. Having a few power users, champions or internal experts can help technology adoption in the beginning stages when it is least sticky, as the power users can help train and advocate to a critical mass. Then, begin the process of scaling statewide. Determine a roll-out strategy and shift the team's focus from a test and learn mindset to a daily implementation mindset. This shift can be a lengthy process but because of the diligent work completed upfront, the team can be confident in its ability to expand throughout the agency and to all contractors and consultants. Overall, adopting new technology allows DOTs to better partner with contractors and other stakeholders by increasing transparency and communication in a paperless environment, while saving time and money. “Technology is intended to make the lives of the people using it easier. Give your people the tools to do their jobs and get out of their way,” said Clifford.
Construction Employers Association...
Cleveland CEA Elects New Officers, Board Members Construction Employers Association (CEA), a Clevelandbased trade association recently elected new officers and two new members to its board of directors. Dominic Ozanne of Ozanne Construction has been elected to serve as chairman of the board of directors. Turner Construction’s Jason Jones is the immediate past chair. Tony DiGeronimo, Precision Environmental, will serve as vice chair and Tari Rivera of Regency Construction Services as secretary. David Giorgi, Giorgi Interior Systems, will serve as treasurer. The new officers will serve two-year terms. The two new board members are Rob DiGeronimo of Independence Excavating and Mark Panzica of Panzica Construction. Additionally, Jim Fox, The Great Lakes Construction Company, and Robert Dalrymple, Northcoast Concrete, are on the board's executive committee. CEA officers and board members are individuals who represent northeast Ohio’s construction industry. “On behalf of our board of directors and all CEA Members, I congratulate Chairman Ozanne and all of the
newly-elected officers and directors and thank them for their willingness to serve the industry,” said Tim Linville, CEA chief executive officer. CEA members are construction companies, specialty contractors, professional advisors, material and equipment suppliers and trade associations. Contractors, owners, develop-
ers and professional service providers lead, learn and improve the industry through their engagement with CEA. “This is a unique time for our nation and for CEA, as the global economy and healthcare systems respond to the impacts of the COVID-19 pandemic, the legacy of systemic racism, and the seditious insurrection and assault on our nation's capital,” said Ozanne. “I am hopeful that we can work together to grow and improve our relationships with owners, unions, members, the public and associated groups. I also hope that we can create new relationships within and outside of CEA to help the less fortunate members of the Greater Cleveland community consistent with the Association of General Contractors [AGC] of America Culture of Care initiative.” CEA operates on three basic principles: quality, integrity and professionalism. Members gain a competitive advantage through a wide array of industry services, professional development offerings and networking events, according to the association.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 49
IN YOU OUR WORLD,
BIG JO OBS NEED BIG MACHINES. E Expect big things from f the John Deere 850L Do ozer. Larger and more powerful than the previous K-Series m model, the 850L gives you 10-ppercent more horsepower andd 23-percent more torque for mass eaarthmoving. And with state-off-the-art controls, the usual D Deere arsenal of production-boosting hydrostatic advantages, a SmartGrade™ fully integratedd grade-control option, p and the choice of a Power-Angle-Tilt g (PA AT) or o Outside Dozer (OSD) blaade, yyou’ll have the precision and performance you need to Run Y Your our World. W Stop by or call us today.
mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054
www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484
www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600
www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060
www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700
www.westsidetractorsales.com Lisle, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677
Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160
Page 50 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
GET YOUR BUTT IN THE SEAT. SCHEDULE A DEMO WITH YOUR LOCAL DEALER ©2020 SANY America, Inc.
2841 Verona Rd • Verona, KY 41092 859-485-8500 • Fax: 859-485-8573 www.newmantractor.com
11745-R Lackland Road • St. Louis, MO 63146 314-427-4911 www.cpower.com
Illinois, Indiana Market...
Tadano Adds Alta Equipment as Authorized Distributor Tadano announced it has added Alta Equipment Company as an authorized distributor of Tadano all terrain and rough terrain cranes, as well as Demag all terrain cranes and Tadano-Mantis telescopic boom crawler cranes, in Illinois and Indiana. Since 1984, Alta Equipment has been a dealer in construction equipment sales, parts, service and rentals across the United States’ Midwest and other key markets. “We are excited to add the Tadano crane product line to Alta’s product portfolio and expand our ability to provide high-quality equipment and product support to our customers in the Illinois and Indiana markets,” said Ryan Greenawalt, chief executive officer of Alta. “Adding Tadano to our crane segment portfolio further positions Alta as the most comprehensive distributor of high-end construction equipment products across our North American footprint,” said Gianni Campo, regional vice president of Alta
Equipment CE division. “Tadano’s worldclass products and inventory allows Alta to serve and service our customers throughout all regions in our construction equipment footprint.” “Tadano is proud to welcome Alta Equipment to the Tadano family of distributor serving North America,” said Ken Butz, Tadano America Corporation vice president of sales. “Alta Equipment has a great reputation for offering industry-leading products and excellent customer support. All of us at Tadano look forward to working with Alta Equipment to serve the crane customer in Illinois and Indiana.” Alta Equipment will soon have a wide range of Tadano cranes in stock including the all-new Tadano GTC-2000 with 172-ton lifting capacity that will be coming later in 2021. For more information, visit altaequipment.com and tadano.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 51
BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME
Marc Murphy, VP of Construction
WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers
CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers
CONSTRUCTION
Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087
Call Today: 610-941-0100 • Email: info@magellangroup.com
www.magellangroup.com
Page 52 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SOLD NEAR N YOU.
Your Y our local D Doosan® dealer is you ur source ffor or sales, par a ts and service.
Learn more at doosanequipment.c . om
Doosan® and the Doosan a logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2021 Doosan Infracore North America, LLC. All rights reserved.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 53
Authorized Doosan Dealers
ILLINOIS
MISSOURI
INDIANA
IOWA
BOBCAT OF MARION
BOBCAT OF COLUMBIA
BOBCAT OF ANDERSON
618-985-8920 doosandealers.com/Carterville
573-886-9435 doosandealers.com/Columbia
765-643-4222 doosandealers.com/Anderson-IN
BROWN’S HEAVY EQUIPMENT
BOBCAT OF SPRINGFIELD
BOBCAT OF ST. LOUIS
B & W EQUIPMENT
217-525-0349 doosandealers.com/Springfield-IL
636-240-9020 doosandealers.com/O’Fallon
800-242-4819 doosandealers.com/Fort-Wayne
SARGENT’S EQUIP & REPAIR SERVICES
636-225-2900 doosandealers.com/Valley-Park
708-758-2062 doosandealers.com/Chicago-Heights
CENTRAL POWER SYSTEMS & SERVICES
847-844-4131 doosandealers.com/Gilberts
816-415-6700 doosandealers.com/Liberty
BOBCAT OF ST. LOUIS
417-865-0505 doosandealers.com/Springfield-MO
618-397-1847 doosandealers.com/Fairview-Heights
NEBRASKA OHIO
BOBCAT OF OMAHA
BOBCAT ENTERPRISES
402-895-6660 doosandealers.com/Omaha
513-874-8945 doosandealers.com/Hamilton
CENTRAL NEBRASKA BOBCAT
614-863-1300 doosandealers.com/Reynoldsburg
308-384-9222 doosandealers.com/Grand-Island
GIBSON MACHINERY
925-606-2451 doosandealers.com/Hastings
440-439-4000 doosandealers.com/Oakwood-Village
925-606-2451 doosandealers.com/Kearney
WISCONSIN SWIDERSKI EQUIPMENT 715-623-4668 doosandealers.com/Antigo 715-693-3015 doosandealers.com/Mosinee
NORTH DAKOTA BOBCAT OF MANDAN
BOBCAT OF EVANSVILLE 812-422-8200 doosandealers.com/Evansville
BOBCAT OF INDY 317-787-2201 doosandealers.com/Indianapolis
BOBCAT OF INDY NORTH 317-769-4946 doosandealers.com/Whitestown
RONSON EQUIPMENT CO. 219-696-5680 doosandealers.com/Lowell
KANSAS CENTRAL POWER SYSTEMS & SERVICES 785-462-8211 doosandealers.com/Colby 620-792-1361 doosandealers.com/Great-Bend
IRONHIDE EQUIPMENT
316-789-7370 doosandealers.com/Wichita
715-258-3266 doosandealers.com/Waupaca
701-772-5006 doosandealers.com/Grand-Forks
715-675-2391 doosandealers.com/Wausau
701-572-5050 doosandealers.com/Williston
319-857-4045 doosandealers.com/Swisher
MICHIGAN CARLETON EQUIPMENT COMPANY 616-877-3388 doosandealers.com/Byron-Center 586-463-3333 doosandealers.com/Chesterfield 269-343-2943 doosandealers.com/Kalamazoo 989-777-6666 doosandealers.com/Saginaw
ELLENS EQUIPMENT
785-825-8291 doosandealers.com/Salina
701-662-5331 doosandealers.com/Devils-Lake
RTL EQUIPMENT 515-986-0262 doosandealers.com/Grimes
BOBCAT OF BLOOMINGTON 812-287-8042 doosandealers.com/Bloomington
701-663-0903 doosandealers.com/Mandan
715-669-5255 doosandealers.com/Thorp
515-232-8456 doosandealers.com/Ames
KENTUCKY BOBCAT OF BOWLING GREEN 270-842-4253 doosandealers.com/Bowling-Green
CONTACT YOUR LOCAL DOOSAN ® DEALER TODAY.
231-825-2416 doosandealers.com/McBain
MINNESOTA LANO EQUIPMENT 952-445-6310 doosandealers.com/Shakopee
THECO 763-428-2260 doosandealers.com/Big-Lake 218-829-2800 doosandealers.com/Brainerd 763-428-2260 doosandealers.com/St.-Michael
Page 54 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo Energy...
Volvo Group Creates New Business Area to Accelerate Electrification The Volvo Group’s new business area, Volvo Energy, will strengthen the business flow of batteries over the life cycle as well as the customer offer for charging infrastructure. At the same time, the environmental impact from electric and hybrid electric commercial vehicles and machines will be reduced by giving used batteries a second life in different applications. “There is a great and growing interest for electric vehicles and machines among our customers,” said Martin Lundstedt, president and CEO. “This is of course very positive as it accelerates the transition towards more sustainable transport solutions. Our ambition is to offer our customers the most competitive solutions when it comes to electrification, including batteries and charging infrastructure. With Volvo Energy, we are taking a holistic view of the entire life cycle, which benefits both our customers’ business and society as a whole.” Already today, the Volvo Group’s offer of electric vehicles and machines ranges from city buses and trucks for waste management, construction and urban distribution to compact excava-
tors and loaders. The roll-out of additional electric vehicles and related services will continue with high pace and later this year, it also will include heavy-duty trucks for regional transports or construction. Volvo Energy will be a business area with full profit and loss responsibility. It will have both an internal role, providing batteries and charging solutions to the Volvo Group’s other business areas, and an external role, offering used, remanufactured and refurbished batteries to customers for use across different applications. Volvo Energy also will carry the Group’s responsibility for hydrogen infrastructure solutions for fuel cell electric vehicles. Collaborations with various business partners and actors across the ecosystem will be key. Commercial vehicle batteries will be used for many years in the vehicle before they need to be replaced or remanufactured/refurbished. However, if completely new batteries are fitted to the vehicle, the used ones will generally still have considerable life left to offer, which makes them ideal for energy storage purposes in, for example,
buildings or in green energy production. Repurposing these batteries therefore mean that natural resources are conserved, Volvo said. “With Volvo Energy, we are further increasing our focus on this important area. We are also giving vehicle batteries a second life, which is both a business opportunity and a way to contribute to the creation of a circular economy and a fossil free society”, said Lundstedt. Joachim Rosenberg, member of the Volvo Group executive board and chairman of UD Trucks, will head the new business area. Starting in February 2021 he will lead the effort to create Volvo Energy while also continuing to run UD Trucks and preparing the transfer of UD Trucks ownership to Isuzu Motors as part of the previously communicated strategic alliance between the Volvo Group and Isuzu Motors. The financial results for Volvo Energy will be reported as part of the Truck segment. For more information, visit www.volvogroup.com/en-en/futureof-transportation.html.
Diversified Product Development Launches Its New RailWise Brand Diversified Product Development has established the RailWise brand to accommodate its growing line of products for the hirail market. The new brand encompasses several of Diversified’s existing hirail products and will help clarify the company’s focus as it expands its rail industry solutions offering. Established hirail maintenance products within the RailWise brand include a platform truck system, a bucket truck system, a rail brake system and a trailer axle system. All of these have been engineered to help make railway maintenance projects more manageable and efficient. Products may be customized to meet customer specifications upon request.
“We believe that the rail industry is growing and specialized equipment is needed to perform exact maintenance tasks more efficiently,” said Noah Gutierrez, director of sales of Diversified. “We have been engineering specialized equipment solutions for a broad client base since 1996, and it makes sense for us to dedicate the new RailWise brand to help solve some of the unique challenges of this demanding industry.” The RailWise name joins a list of other specialized brands marketed by Diversified Product Development, including the LineWise brand of lineman tools; the LiftWise brand of fall-arrest man baskets; and the DesignWise brand of fully integrated product design and development services. For more information, visit www.hirail-wise.com.
ILLINOIS DIAMOND EQUIPMENT
MINNESOTA ZIEGLER CAT
www.diamondequipment.com Mt. Vernon 618-242-2273
www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469
KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green 270-781-1061
OHIO CAT www.OhioCAT.com Richwood 888-446-4658
WILSON EQUIPMENT COMPANY www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036
WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 55
IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889
OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)
MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770
INDIANA MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)
DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428
Page 56 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650
1st Choice Equipment LLC
ABC Equipment Rental & Sales
Southeastern Equipment Co., Inc.
www.1stchoiceequipment.com
www.abcequipment.com
www.southeasternequip.com
29 Pearl Rd. Brunswick, OH 44212 888/572-3888
3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868
38525 Chester Rd. Avon, OH 44011 440/934-7368
4951 West 96th Street Indianapolis, IN 46268 317/872-4877
1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802
Alta Equipment Co. www.altaequipment.com 18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 57
Construction Machinery Company Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900
www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 2235 Ragu Drive • Owensboro, KY 42303 Dealer 270/683-2000 • 877/683-2262 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661
Kelbe Brothers Equipment Co., Inc.
Kirby-Smith Machinery, Inc.
www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151
www.kirby-smith.com 8320 Ruby Avenue • Kansas City, KS 66111 913/850-6300
Im mprint Area
4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 3101 French Rd. • DePere, WI 54115 920/343-6496
Page 58 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
John Deere Rolls Out New Performance Tiering Strategy Developed in response to evolving customer needs and expectations, John Deere launched its Performance Tiering Strategy, delivering a range of products at different levels of capability and user experience. Available first on the wheel loader lineup, the Performance Tiering Strategy supports customers by providing machine solutions built for various applications and jobs to enhance profitability and efficiency. Moving away from the traditional series letter designations, the Performance Tiering Strategy provides three tiers of machines — G tier, P tier and X tier. “Every job site is unique, and customers want machine solutions that can be personalized to meet their diverse needs, including performance, price and comfort,” said Jason Daly, global director, production systems, technology and marketing, John Deere. “By offering three tiers, customers can move up or down the spectrum to find the right mix of features, performance and innovation for their business and application.” The Performance Tiers are defined as: • Adding a premium edge, the X-tier models are built with the most innovative John Deere technology and features, delivering the highest levels of productivity, efficiency and customer experience. • P-tier models can be counted on to produce at high levels, day in and day out. Advanced features deliver exceptional performance, efficiency, comfort and service life in demanding, high-production applications. • The G-tier models are practically equipped and economical, providing proven capabilities with the reliability and ruggedness expected from John Deere. These
The X-tier models are built with the most innovative John Deere technology and features.
machines are ideal for customers in need of a reliable machine to complete common light- to medium-duty tasks. The 444-724 P-tier machines reflect the performance capabilities and features that most customers expect from John Deere, such as those found on the current L-Series wheel loaders, including a redesigned cab, P-tier models deliver performance, efficiency, comfort and service life in demanding, high-production applications.
The G-tier models are practically equipped and economical.
standard parallel lift Z-Bar loader linkage, high-lift plus option, electrohydraulic controls and dual return-to-dig settings. A highly productive and efficient 5-metric-ton wheel loader, the 644 X-tier features E-Drive technology, comprises a diesel-electric drivetrain and exemplifies the type of innovative features that distinguish the X tier, according to the manufacturer. The 644 G-tier is the first model to be available in the lineup of G-tier wheel loaders. Leveraging proven components and technologies, the 644 G-tier is equipped with an all-new cab designed to boost operator comfort and productivity. Customers can customize the machine through a variety of base-level packages, including axles, tires, ride control, seats, radio and rear chassis work-light selections. With the 644 G-tier machine, John Deere delivers a solution ideal for light to medium
construction jobs, such as stockpiling, short load-and-carry, truck and hopper loading, and material handling. Designed and manufactured by John Deere, all tiered machines are backed by the same level of support that customers have grown to rely on — including John Deere Connected Support and a five-year subscription to JDLink. Customers can distinguish the different levels of tiering by not only the attributes and capabilities, but also by the distinct branding and design cues on the machines. The John Deere X and P machines are now available for purchase in the United States and Canada, and the 644 G machine is available in Canada and other global markets. Other product categories will follow the Performance Tiering Strategy over time. For more information, visit www.JohnDeere.com/Findyourfit.
SECTION
Attachment & Parts Pages 59-63
For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
Tree Service Finds Stability With Black Splitter S2 800 Out on the Limb Tree Service LLC has built up a large contingent of trucks and equipment over its 21 years in business, but the acquisition of a Black Splitter S2 800 cone splitter from Ransome Attachments in 2018 has brought a new level of versatility to this tree service operation. The company provides a range of services including tree removal, pruning, chipping, and stump grinding to residential, commercial, and government customers within a 35-mi. radius of its Seymour, Conn., headquarters. “We have land clearing guys with shears, but we didn’t have an excavator large enough to bust up big wood,” Owner Adam Lieder said. “We looked at other avenues that would allow us to process some of our bigger wood into more manageable pieces.” The landscaper found the Black Splitter through an internet search. After making a positive connection with owner Eric Ransome, the company was convinced that the S2 800 was the right fit for its machine and operation. Out on the Limb’s previous process needed improvement, according to Lieder. “We were basically cutting it down to firewood size and putting it on the log splitter.” The S2 800 is designed to fit all sizes of compact excavators, but Out on the Limb has it mounted on a Bobcat E45 mini excavator. A quick coupler allows for a quick switch between machines as needed. The Black Splitter can usually be found processing wood in the company’s yard, or in tow on a trailer to a local work site. Most onsite removals and cuts are done with a rotating grapple, but Out on the Limb often uses the Black Splitter to breakdown larger, gnarlier trees and stumps. Seymour and surrounding towns are heavily wooded with an abundance of mature trees so Out on the Limb often takes down and disposes of large, off-size timber. Logs under 8 ft. cannot be sold, and yet they’re also too large to dispose of easily. “With the Black Splitter, we can take these large, knotty sections, bust them down into a manageable size, chip it, and sell the chips,” he said. “We can also break down six-footers into four sections and drop it off at someone’s house for a pack of cheap firewood.” The S2 800 is in its glory back at the yard when processing and feeding wood to a Morbark 20/36 whole tree drum chipper. The crew usually sorts garbage wood and logs into separate piles and begins breaking The Black Splitter S2 800 cone splitter Out on the Limb Tree them down when the mound gets too large. Service acquired from Ransome Attachments in 2018 has “When we’re in processing mode, we throw the brought a new level of versatility to its tree service operation. Black Splitter on and hammer down,” said Lieder.
The increased productivity is noticeable but the greater value for Out on the Limb is in being able to turn once unusable materials into a new revenue stream. “We’re taking byproducts that we couldn’t do anything with and turning them into a usable product,” Lieder said. Out on the Limb re-grinds wood chips and dyes them to make mulch. The finished product is sold to commercial customers and given to homeowners for free because there is no demand for the chips with the abundance of trees in this part of Connecticut. “These chips are usable product to somebody somewhere, and they’re easy to get rid of because homeowners like them,” he said. “Now I can keep Joe Smith happy because he gets a free load of wood chips and I don’t have to look at this big, gnarly piece of pine that I have no use for.” Lieder said his crews deal with virtually every type of northeastern tree including Pine, Oak, Ash, Hickory, Maple, Spruce and Hemlock. Out on the Limb has not encountered any wood that the Black Splitter could not handle, but they find Hickory to be the most challenging because of its stringiness. In these cases, the excavator operator simply engages the spinning motion of the S2 800 and sweeps between the log sections to break the strands. Out on the Limb’s use of the Black Splitter is sporadic. “We don’t run the S2 800 every day, but a few weeks ago we ran it for a week straight,” Lieder said. “I couldn’t even tell you how many hundreds of yards of wood chips we produced.” The S2 800 also helps with a trend among homeowners that’s resulting in increased processing for Out on the Limb. Homeowners in decades past often asked for firewood to be left on site, as opposed to today’s homeowners that want everything hauled away. This means less time in the field breaking down wood and cleaning up sawdust and more time hauling and processing it. “It’s cheaper for us to just haul it offsite and try to figure out something later than it is to sit there and cut up firewood and sawdust in someone’s yard,” Lieder said. “It’s a win-win because I don’t have to clean up sawdust in the yard and we’re making a bad byproduct into good byproduct, which is obviously the number one goal.” Lieder sees the possibility of buying a larger excavator and Black Splitter model in the future. “If we keep on growing, we’ll probably add another bigger Black Splitter and keep on doing what we’re doing,” he said. “It seems to be working.”
Page 60 • February 6, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Can Your
Mini-Excavator... Quick Change from Excavator...
Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!
It Can Now! XBoom Coupler® System
(800) 526-8538 Amulet.com
Available for most late-model brands up to 13K-Lbs
The XBoom Coupler® is an Exclusive, Patented product. XBoom Coupler® is a Registered Trade Mark and all product name(s), logo(s) and content is Copyright Protected © 2018.
Hultdins Introduces Fixed Mount MG Grapple Saws Hultdins’s fixed mount MG grapple saws are available in three sizes for excavators from 6 to 27.5 ton (5.5 to 25 t) capacity. This new grapple saw configuration does not require an extra dedicated auxiliary circuit for the saw function as it is operated off the grapple close circuit. The only hydraulic requirements are the standard auxiliary “hammer” circuit and a low flow rotation circuit. The saw unit is based on the SuperSaw 555S, which is popular on Hultdins SG forestry grapples and many other manufacturers of grapple saws, according to the company. The saw unit features automatic chain tensioning, proportional chain lubrication, and fast and easy replacement of the saw bar or chain. The MG grapples are based on the same design as the SG SuperGrip log grapples. MG grapples are equipped with the Indexator XR rotator, which offers a compact low-profile design with extremely high load capacities. Boom adapters are available to match any machine hydraulic coupler or direct mount. For more information, visit www.hultdins.com.
This new grapple saw configuration does not require an extra dedicated auxiliary circuit for the saw function as it is operates off the grapple close circuit.
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • February 6, 2021 • Page 61
BR RING SA AFETY, INNOVA I VATION T & DURABILITY Y TO YOUR O JOB B SITE ESCO loader buckets are precision engineered and d feature the Ultralok® too oth system that provides safer and easier tooth replacement. ment. Combined with premium mium materials and skilled d fabrication, ESCO delivers vers one of the most durable, high-performance gh-performance buckets available.
Ultralok® Tooth o System y
General Equipment & Supplies, Inc. www.genequip.com 4300 Main Avenue Fargo, ND 58103 800-437-2924
www.esco.weir .
816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399
East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080
ESCO Manganese Crusher Wear e r Parts
Roland Machinery Co. www.rolandmachinery.com Escanaba, MI Columbia, MO 906/786-6920 573/814-0083 Bridgeton, MO Palmyra, MO 314/291-1330 573/769-2056 Cape Girardeau, MO DePere, WI 573/334-5252 920/532-0165
DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710
Schofield, WI 715/355-9898 Slinger, WI 262/644-7500
Copyrig ght ©, WEIR and the WEIR Logo are trademarks demarks and/or registered trademarks off We eir Engineering Services Ltd.
Page 62 • February 6, 2021 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
PUT MORE ON THE GROUND WITH
LaBounty | 1538 Hwy 2 | Two Harbors, MN 55616 | 1-833-723-1843 | www.stanleyinfrastructure.com/brands/labounty
Company Wrench www.companywrench.com 4510 East 71st Street Headquarters: 4805 Scooby Lane NW Cleveland, OH 44105 440-439-4567 Carroll, OH 43112 740-654-5304 866-262-4181
920 Deneen Avenue Monroe, OH 45050 513-402-7297
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • February 6, 2021 • Page 63
+HDGTXDUWHUUV V 1: WK 6W 0LDPL )/
0LGZHVW /RFDWLRQ 0D\ 5RDG 3HUX ,/
3+ - 7ROO )UHH - )D[ -
VDOHV#WHUDQLQGXVWULHV FRP ([FOXVLYH PDQXIDFWXUHUV RI
:( +$9( $ :,'( 5$1*( 2) $77$&+0(176 )25 &$6(Š &$7(53,//$5Š -2+1 '((5(Š '226$1Š +<81'$,Š -&%Š .2%(/&2Š .20$768Š 92/92Š (48,30(17
^< > dKE h < d^
, sz hdz h < d^
ZZZ WHUDQLQGXVWULHV FRP DQG
$WWDFKPHQWV
HYDRA AULIC BREEAKERS ALL MA AKES & MO M DELS
^W EK^ >K Z h < d^
LONG G REACH ARMS A > E-hW h < d^
Z/WW Z^
'Z WW> ^
Z < ^
d,hD ^
Yh/ < KhW> Z^
The Right h Attachme ent for the e Right Job b at the Rig ght Priceq 7KH QDPHV DQG ORJRV &DWHUSLOODUŠ .RPDWVXŠ -RKQ 'HHUHŠ 9ROYRŠ RU DQ\ RWKHU RULJLQDO HTXLSPHQW PDQXIDFWXUHUV DUH UHJLVWHUHG WUDGHPDUNV RI WKH UHVSHFWLYH RULJLQDO HTXLSPHQW PDQXIDFWXUHUV $OO GHVFULSWLRQV QXPEHUV DQG V\PEROV DUH XVHG IRU UHIHUHQFH SXUSRVHV RQO\ 7HUDQ ,QGXVWUULHV ,QF LV QRW DIILOLDWHG ZLWK WKH EUDQG PHQWLRQHG DERYH
Page 64 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 65
MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.
Roland Machinery Co.
Central Power Systems & Services
www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474
Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151
©2019 Doosan Portable Power. All rights reserved.
Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920
www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Great Bend, KS (816) 781-8070 (620) 792-1361 ALP Air, Light, Power Liberal, KS Liberty, MO (620) 624-7274 (816) 415-6700 Salina, KS Joplin, MO (785) 825-8291 (417) 726-5373 Wichita, KS Maryland Heights, MO (316) 789-7370 (314) 427-4911 Woodward, OK Springfield, MO (580) 256-6014 (417) 865-0505 Yukon, OK (405) 324-2330
MAKE POWER MOVES.
Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390
Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410
Page 66 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Mecalac Offers New Boom Optimized for Excavation, Loading Applications Mecalac, a global designer, manufacturer and distributor of compact construction equipment for urban environments, offers a new configuration of its two-piece boom with offset for 6MCR skid excavators and 7MWR wheeled excavator models. The boom option allows customers to better tailor equipment for their specific needs. “Mecalac excavators represent a new approach to existing equipment — a 360-degree compact excavator,” said Peter Bigwood, general manager of Mecalac North America. “Thanks in part to an innovative boom design, our MCR and MWR machines open faster and close up tighter than anything out there, providing more power, speed and dexterity for the tightest work sites. But innovation never stops. Our engineers found a way to further specialize our existing technology for certain applications.” The new option is a variation of the Mecalac boom optimized for excavation and truck loading applications. This alternative boom configuration positions the stick cylinder above the boom, rather than underneath, to provide a wider working angle, faster movement and higher penetration force while maintaining the features that make the original Mecalac boom revolutionary on the excavator market, according to the manufacture. Dimensions and work envelope remain similar to the standard boom, and attachments, such as loader buckets and pallet forks, are still compatible. The new Mecalac boom is now the standard configuration for 6MCR and 7MWR excavators. The original boom design will remain standard for all other models in the MCR skid excavator and MWR wheeled excavator series, which provides enhance power and flexibility for diverse applications. Unlike traditional mono booms, Mecalac’s design features five axes for an increased range of motion, providing a more compact footprint and minimizing the need to reposition the machine in a number of situations. The boom can be tucked in close to the machine, even with a full bucket, allowing for extra compactness and mobility without overbalancing the unit in the front — resulting in a true zero-turn radius, according to the manufacturer. For loading trucks, working in confined spaces or operating near the body of the machine, the
boom’s extended range of movement increases flexibility and reach while minimizing unnecessary movement. This dexterity also increases overall efficiency with a number of attachments. For example, it allows for parallel lifting and below-grade operation with pallet forks. The boom is offset to the side of the cab, which allows the operator to angle the first part of the boom back to increase stability during lifting — resulting in a high lifting force — The new boom configuration provides a wider working angle, faster movement and higher penetration force for excavation and truck loading applications.
KOBELCO-USA.COM
Mid Country Machinery 3478 5th Ave S Fort Dodge, IA 50501 800-206-5936
Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303
4734 Sergeant Road Waterloo, IA 50701 319-234-8710
1356 3rd Street Brilliant, OH 43913 740-598-3400
106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com
W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719
6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073
3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479
DeForest, WI 608-222-9191
8757 Tyler Blvd. Mentor, OH 44060 440-255-6300
Eau Claire, WI 715-832-3443
404 Breaden Rd. Monroe, OH 45050 513-539-9214
De Pere, WI 920-338-5800
Mecalac offers two boom options for the 6MCR and 7MWR, allowing customers to better tailor equipment for their specific needs.
1500 Industrial Parkway Brunswick, OH 44212 330-225-6511
228 SR 7 North Gallipolis, OH 45631 740-446-3910
Miller-Bradford & Risberg, Inc.
and reduces the machine’s overall footprint for work in confined areas. An additional offset in the second segment of the boom lets contractors dig outside the machine’s width as well as work parallel to the machine over longitudinal obstacles, such as fences. “From the start, Mecalac’s boom design changed the game for excavator operators, increasing lifting capacity to industry-leading levels and allowing them to work closer to the machine than ever before,” Bigwood said. “But we recognize that contractors take different paths to achieve success. To help maximize the benefits of our MCR and MWR machines for every customer, we offer a boom optimized for excavation and truck loading applications.” For more information, visit www.mecalac.com.
Southeastern Equipment Co., Inc.
Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com
6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868
Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com
4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 67
Blue Ridge Tractor
Illinois Truck & Equipment Co.
6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com
320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com
General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500
3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com
Page 68 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Association Leaders Urge Administration to Reconsider EOs By Lucy Perry
As one of his first executive orders, President Joe Biden revoked the Keystone XL Pipeline permit, halting construction of the Canada-to-Texas project that would transport 800,000 barrels of oil a day.
CEG CORRESPONDENT
President Joe Biden signaled changes in climate and energy policies when he signed a slew of executive orders on his first day in office. Though some consider this a positive move toward reducing global warming and carbon footprint, others see it as adversely affecting the construction sector and a threat to the economy, which President Biden campaigned to support. The American Road & Transportation Builders Association (ARTBA) noted three major executive orders (EOs) that will affect the construction industry. Biden signed a “regulatory freeze,” halting agency activity until all appointees are installed. “In practical terms, this action stops agencies from moving forward on any proposed rules, which have not yet been finalized,” said Nick Goldstein, ARTBA vice president of regulatory and legal issues. “This includes the USDOT implementation of the updated National Environmental Policy Act (NEPA) modernization, which ARTBA supported.” Goldstein also noted Biden revoked the federal permit for the Keystone XL pipeline. Shutting the Pipeline The 1,700-mi. Keystone pipeline has been on-again, offagain, depending on which administration held United States office. A massive project, it would carry roughly 800,000 barrels of oil a day from Alberta, Canada, to the Texas Gulf Coast. In 2013-14, the project was criticized by Native Americans, environmentalists and ranchers. In 2015, President Barack Obama shut down the northern leg of the project after outcry from the public. President Donald Trump signed an executive order in 2017 approving permits for the northern end of the project. The pipeline would pass through Montana, South Dakota, Nebraska, Kansas and Oklahoma. Energy service provider TC Energy decided to terminate more than 1,000 construction jobs as a result of the permit revocation.
“The project’s suspension will result in several job cuts even when it intended to use renewable energy sources to power the pipeline system,” the company said in announcing its displeasure with Biden’s action. “Earlier, the company announced its plan to wipe out more than three million tons of CO2 equivalent,” said the company. The plan was an attempt to convince Biden that Keystone XL fits into his ‘Build Back Better’ agenda, according to TC Energy. Industry Reaction “ARTBA and industry allies have supported the project, citing its potential for creating significant economic benefits, including much-needed jobs in the transportation construction sector,” said Goldstein. Brian Turmail of the AGC was not so optimistic about Biden’s swift actions. He said his association hopes the actions are not part of a broader plan. “It’s not a positive sign that someone who claims to be a union president killed 1,000 union jobs when he came into office,” said Turmail, vice president, public affairs of the association. “We hope this was done to placate the radical wing of the democrats and not a foreshadowing of a broader infrastructure agenda by the president.” Turmail said the moves give association members pause for concern. “We wonder whether this president is focused on rebuilding
infrastructure or placating environmental activists.” The irony, he said, is the Keystone revocation won’t stop the shipment of fossil fuels but will instead create more environmentally damaging methods of moving the oil. It will require the oil to be moved via rail or truck, requiring “far more energy to move than by pipeline.” The association’s position is the revocation “doesn’t make a lot of sense” environmentally, Turmail added. “From an infrastructure point of view, it’s troubling.” And from an economic point of view, “it’s not a direction our economy should be heading right now,” he added. Turmail did say it’s still too early to forecast long-term effects of the revocation, especially “when one project has such an effect on a broader market.” But, he added, AGC members expect the majority of construction will contract in 2021, and this doesn’t help. “It’s an already-difficult economic climate. We don’t need difficult and unfriendly political environment as well,” he added. The Associated Equipment Distributors (AED) is just as concerned by President Biden’s actions. Daniel Fisher, vice president, government affairs of AED, said association members have provided “a lot” of equipment in the United States and Canada for the project. They’ll be hit hard by the Keystone Pipeline permit’s revoca-
tion, he said. Revoking the permit “effectively kills continuation of construction in the U.S. and Canada, unless President Biden decides to reverse his actions at some point.” In the very near future and longterm, it will likely mean contractors working on the pipeline will no longer have need for equipment, said Fisher. That means purchase orders and rental agreements for equipment out there will be cancelled or delayed. “We also wonder how this could impact future large pipeline projects,” he said. Fisher noted that this project had been reviewed for 10 years by previous administrations. “It represents virtually no environmental impact.” The pipeline construction work would be performed by union workers and run entirely on renewable energy, he said. “It’s one of the more environmentally-friendly pipeline projects, so I doubt the future of any larger pipeline project as long as we have this current administration for the next four years or so,” Fisher added. He said AED as a whole is hopeful the administration will reconsider its stand on these issues, for the sake of the construction industry and the economy. “We hear a lot of buzz” in the industry, he said, noting there was been broad support for the Keystone project. “We’re in shock, but we’re holding out hope the Biden administra-
tion will take another look at its climate and energy policies,” said Fisher. Other Biden Orders Biden also repealed multiple Trump administration deregulation executive orders. One EO he repealed was the One Federal Decision, shortening national EPA reviews to two years. He also repealed the two-forone EO mandating that two rules be repealed for every one that is enacted, said Goldstein. “Additionally, the EOs will start a review of dozens of federal regulations enacted by the Trump administration, including many supported by ARTBA,” he said. Beyond NEPA modernization, ARTBA backed the Navigable Waters Protection Rule, which replaced the Waters of the United States rule. The association also supported reforms to the Endangered Species Act and recent decisions to retain current Clean Air Act standards. “While the results of this review are unknown, any changes made to these rules are subject to the public comment process,” said Goldstein. “The EOs also show how President Biden will incorporate his priorities into future rulemakings by asking agencies to ‘identify ways the regulatory process can promote public health and safety, economic growth, social welfare, racial justice, environmental stewardship, human dignity, equity and the interests of future generations.’” For transportation projects, “this could mean an increased focus on studying how proposed projects impact minority and other underserved communities.” Goldstein noted that the Biden administration also issued an EO directing OSHA to evaluate whether an emergency temporary standard (ETS) covering all employees and all industries is necessary to combat COVID-19. “ARTBA will evaluate all proposals from the new administration on their merits,” Goldstein said. The association will also “continue to push for a regulatory environment that promotes efficient, safe and cost-effective delivery of transportation improvement projects,” he added. CEG
Trucks & Trailers
SECTION
Pages 69-76
To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
Mack Makes OTA Updates Standard On Certain Models The driver download activation feature is factory-equipped on models built at Lehigh Valley Operations, in Macungie, Pa., where all Mack Class 8 models for North America and export are assembled. Software retrofits for 2019 Model Year and later Anthem, Pinnacle and Granite models also are available.
Mack Trucks announced that its driverMack OneCall agents remain available activated Mack Over The Air (OTA) 24/7 to assist whenever needed for schedulupdates feature is now standard on the ing and activating updates. Mack Anthem, Pinnacle and Granite modMultiple vehicles can simultaneously els, enabling customers to implement softreceive the updates. ware updates themselves at a time when it’s Mack conducted thousands of internal most convenient for them. tests before launching a successful fourThe driver download activation feature is month, two-phase pilot program with 15 factory-equipped on models built at Lehigh Through OTA, Mack customers can set an extensive list of vehicle parameters such fleets. During that time, more than 500 drivValley Operations, in Macungie, Pa., where as maximum road speed, multiple idle shutdown parameters and kits, as well as er-activated updates were successfully conall Mack Class 8 models for North America parameters that control the Mack mDRIVE automated manual transmission. ducted on each truck, resulting in zero and export are assembled. Software retrofits issues. for 2019 Model Year and later Anthem, Pinnacle and OTA offers customers the ability to implement software The driver-activated feature can be retrofitted on Mack updates and vehicle parameter settings remotely through Model Year 2019 and newer vehicles through Mack Granite models also are available. “Mack continually looks for new ways to develop solu- Mack GuardDog Connect, Mack’s fully integrated telem- Premium Tech Tool, a Windows-based application tions that help improve our customers’ total cost of owner- atics platform. Driver-activated updates eliminate the need designed to test, calibrate and program engine parameters. ship,” said David Pardue, vice president of connected vehi- for coordination phone calls with Mack OneCall agents, Through OTA, Mack customers also can set an extenand updates are completed in less than 13 minutes, greatly sive list of vehicle parameters such as maximum road cle and contract services for Mack Trucks. “Driver-activated Mack Over The Air updates, the next reducing the amount of time the customer previously need- speed, multiple idle shutdown parameters and kits, as well evolution in remote programming, allows flexibility, along ed for updates, according to the manufacturer. as parameters that control the Mack mDRIVE automated “With this driver-activated feature, fleets can conduct manual transmission. with the ability for customers to initiate software updates and the setting of vehicle parameters when it’s most suit- onboard updates via the truck’s instrument cluster, offering The system also enables Mack-initiated software customers greater flexibility and efficiency,” Pardue said. updates used to continuously enhance product performance able to their schedules.” This service is free for the first two years of ownership “Each customer identifies who is able to activate the to be downloaded and installed at the customer’s convenand can be extended by subscription after that time period. update, whether it’s the driver who receives notification ience. Mack OTA set the industry standard for remote pro- that an update is available through the instrument cluster, or OTA parameter changes also are available for previously gramming when launched in 2017, and the driver display a designated technician who activates the update via a purchased vehicles with Mack EPA 2017 engines. activation feature now further enhances the capability. unique password.” For more information, visit www.macktrucks.com.
Page 70 • February 6, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Dakota Bodies Unveils Design Changes to Its Second-Generation Service Body Dakota Bodies announced the release of its new and improved weld together service body. The weld together design of the Gen II Service Body provides a long-term, solid connection between parts to achieve increased structural integrity, according to the manufacturer. The most notable update to this body is the included universal mounting kit designed to fit 2020 and newer Ford, Ram and GM chassis. Other major design updates include: • Compression T-handle door latches • Cast aluminum fenderettes • Silver zinc finish tailgate brackets • Fuel filler cup in streetside fender • Modernized bumper appearance “I think customers will appreciate the modernized design elements, new price point and ease of upfitting with the universal mounting kit,” said CEO Jeff Orthausis. “Times change and it’s important that we adapt and continuously grow our products to fit current and future
www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121
The most notable update to this body is the included universal mounting kit designed to fit 2020 and newer Ford, Ram and GM chassis.
needs.” The Gen II Service Body is completely customizable to fit each customer’s needs. It is immediately avail-
able for quotes. For more information, visit call 886/227-0071 or visit www.dakotabodies.com.
NTEA Forms Fleet Advisory Council NTEA – The Association for the Work Truck Industry announced the formation of the Fleet Advisory Council, composed of innovative and forward-thinking fleet leaders who will provide perspective and guidance on Association resources for the work truck community. “NTEA continues to increase its efforts to keep the fleet management community informed on the latest trends in products, alternative fuels, and regulations impacting the design and specification of commercial vehicles,” said Fleet Advisory Council Chair Tony Orta. “I am looking forward to working with such a respected group of fleet managers as we support the association in this endeavor.” The council will offer insights on how the association’s current efforts to support educational programing, vehicle optimization and design, regulatory compliance, risk management, alternative fuels and electrification and technology applications are resonating with industry fleets. In preparing for future needs of fleet professionals, council members will help identify new areas of support aligned with NTEA’s technical and regulatory focus. “This diverse group of fleet experts extends the reach of the association and brings decades of experience from the vocational fleet society,” said Christopher Lyon, NTEA director of fleet relations. “This group will provide groundlevel perspective on issues, challenges and solutions that fleet managers face every day.”
Fleet Advisory Council Members • Tony Orta (chair), fleet operations manager, Southern California Gas • Dean Ainardi, assistant utilities fleet manager, Tacoma Public Utilities • Scott Bucciere, fleet operations manager, Davey Tree Expert Company • Jamie Cooke, chief operating officer, department of General Services, Montgomery County, Md. • Robert Ellingsworth, fleet manager, Minnesota Department of Transportation • Tom Lattimore, statewide fleet operations and maintenance coordinator, Minnesota DNR • Jimmy Pang, engineering and development lead, Verizon fleet operations • Kelly Regan, fleet administrator, city of Columbus • Kathy Wellik, director of fleet services, Iowa State University An early focus, and area of significant growth and constant evolution for NTEA, is educational programming. Fleet Advisory Council will assist in identifying topics for potential incorporation in NTEA’s events, publications, whitepapers, case studies and webinars. For more information, visit ntea.com/fleetadvisorycouncil.
www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700 455 West Ave. North West Salem, WI 54669 608-786-2644
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • February 6, 2021 • Page 71
,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV
,#5*1 # " +-
(PY 9HTW ,X\PWWLK
(PY 9HTW ,X\PWWLK
:JHU 5V^ [V >H[JO =PKLV
9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP
www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182
www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107
www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085
www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551
3300 Ogden Ave. Lisle, IL 60532 630-355-7150
www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700
7355 East 30th St. Indianapolis, IN 46219 317-544-3411
150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362
600 Walnut Ct Rockdale, IL 60436 815-730-9011
3021 South 460 East Lafayette, IN 47905 765-477-6933
3110 Prairie Rd. Rockford, IL 61102 815-961-3160
1095 N Curry Pike Bloomington, IN 47404 812-333-9677
25166 State Road 2 South Bend, IN 46619 574-232-1461
3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576
3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160
Page 72 • February 6, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Kriete Truck Centers Acquires Two Dealership Locations Mack Trucks dealer Kriete Truck Centers announced its acquisition of Scaffidi Truck Centers, adding two locations to Kriete’s footprint. The two dealerships acquired by Kriete are located in Stevens Point and Tomahawk, Wis. “This investment shows the commitment of Kriete Truck Centers, which has long been a premier Mack dealer, to the Mack brand and its customers,” said Jonathan Randall, Mack Trucks senior vice president of North American sales and commercial operations. “Scaffidi has served our customers well, and we are pleased that the exemplary service and support Mack customers receive at Kriete locations is now extended to two other rooftops.” With the acquisition, Kriete Truck Centers now operates 10 Wisconsin dealerships along with the Stevens Point and Tomahawk locations, including in Milwaukee, Fond du Lac, Racine, Madison, Green Bay, Mauston, La Crosse and Sheboygan.
Mack Trucks dealer Kriete Truck Centers announced its acquisition of Scaffidi Truck Centers, adding two locations to Kriete’s footprint. The two dealerships acquired by Kriete are located in Stevens Point and Tomahawk, Wis.
“We are proud stewards of the Mack brand, and to be able to expand into new markets while teaming up with successful Mack partners is a real blessing,” said David Kriete, president and CEO of Kriete Truck Centers. “Our goal to be the very best employer to our
people and advocate for our customers is only strengthened by unifying two quality companies and expanding our footprint. This emphasizes our desire to be the very best in all that we do. We are excited for the future.” Celebrating its 70th anniversary
'(6,*1(' 72 0$.( <285 -2% ($6,(5
7 5 $ , / ( 5 6
in 2021, Kriete Truck Centers was founded in 1951 by Henry Kriete, a former vice president at Mack Trucks Inc. in the 1930s and 1940s. Now in its third generation, the business remains family owned, with headquarters based in Milwaukee.
Along with the dealerships, Kriete also operates Kriete Leasing and Rental, a wholly owned subsidiary with more than 1,000 trucks and trailers for lease, finance, maintenance, service and rental. Kriete offers an in-house body builder and “rig-up” center with a full product line of bodies, trailers, loaders and beds. Kriete also is the certified dealer representing Putzmeister and Sany products in the Midwest. With the acquisition, 74 employees join Kriete along with 25 additional service bays, bringing the total number of technicians throughout the Kriete group to more than 250. The acquisition also brings Kriete’s total service bays to more than 100 and more than $20 million in parts inventory. The Stevens Point location is open 24 hours Monday through Saturday and Tomahawk is open from 7 a.m. to midnight Monday through Saturday. For more information, visit macktrucks.com.
Government Co-op Agreement…
Kenworth Lands Purchasing Contract With Sourcewell Kenworth Truck Company has won a new, four-year Cooperative Government Purchasing Contract with Sourcewell. The cooperative contract (060920-KTC) expands sales opportunities for new Kenworth Class 5-8 chassis to more than 77,000 Sourcewell members throughout the United States and Canada. “Our new Sourcewell contract offers an excellent opportunity for municipalities and government agencies to purchase the full Kenworth line of commercial vehicles, including the Class 8 vocational leader T880, T800, W990 long-hood model, onhighway flagship T680, medium duty T370 conventional and new K270E and K370E battery-electric vehicles,” said Laura Bloch, Kenworth assistant general manager of sales and marketing. Sourcewell creates national cooperative contract purchasing solutions on behalf of its member agencies, which include govern-
ment, education and non-profit agencies. Cooperative contract use is a growing trend for governmental purchases due to its competitively awarded contracts, simple process, and time and money saving benefits. As part of the Sourcewell bid process, responses from truck manufacturing and supply companies are evaluated against multiple criteria to assure member agencies get the best value when making purchase decisions. The criteria includes considerations such as variety of products and services offered, marketplace success, pricing and value added attributes. The new Kenworth contract with Sourcewell for all Kenworth dealers is in effect until 2024. For more information about Sourcewell, visit www.sourcewell-mn.gov. For more information about Kenworth, visit www.kenworth.com.
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • February 6, 2021 • Page 73
Mid Country Machinery (800) 206-5936
3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470
www.midcountrymachinery.com
New Heavy Duty Side Dump Trailer by Bauer Built Mfg. Now Exclusivley Available at Mid Country Machinery
BAUER SIDE DUMP FEATURES: • Hitch-style option: either AG (shown) or Gooseneck • 360-degree rollover hitch • Two trunnion pivot cylinders • Option to dump left or right side • Equal-displacement hydraulic suspension • All six hydraulic drum brakes
• Self-steer rear axle • Triple-axle design • Hydraulic jack • 40 ton/36 cubic yard capacity • 50k lb. rated hub and spindle (x6) • 750/45R26.5 floater tires
Page 74 • February 6, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Pittsburgh, PA Lancaster, PA Hubbard, OH Cincinnati, OH
(412) 747-7777 (717) 569-4531 (330) 534-0082 (513) 874-4880
Daily RENTALS & Long-Term LEASING! (412) 747-7777
New & Used Trailer Sales • Rental / Leasing • Financing • Service • Parts
2021 60-TON XL Specialized, 26’ Deck Length, 18� Deck Height, 60-Ton in 10’, 36� Flip Neck, Hydraulic Nitro Spreader, Intermediate Flip Axle, Standard Flip Axle. Trailer can be run as 3, 4, or 5 axles together, RU FRQ¿ JXUDWLRQV
2011 Aspen Folding Neck 70-Ton.
HYDRAULIC TAILS 2013 Trail-Eze, 40-Ton, 46’x102�. $36,900
Unit # 3521
EXTENDABLES
Unit # 4355
• 150 — 2015 Reitnouer 48'x102" Maxmiser $24,950 Flatbeds (Coming Soon) • 40 — 2014 Reitnouer 48'x102" Maxmiser $21,500 Flatbeds (In Stock)
Qty 5 - NEW Eager Beaver Pavers, 35 GSL-PT Hydraulic Detachable Lowboys, 35-Ton, 24’ Deck, Air Ride. Qty 1 - 35 GSL-BR, 35-Ton, 24’ Deck, Beaver Tail.
2013 Sunbelt Pole Trailer, 48’/65’x102�, S/R. Unit# 4031
2015 Fontaine Magnitude 55HDSR, 26’ in Well. Unit# 4442 Qty 2 – New Fontaine LXT-40, 53’-74’x102�, 34’ Well - Closed, 60’ Well - Open, 40-Ton, Mechanical Detach. (Pictured)
ALL Tri-State Locations
Qty 1 – New Fontaine LXTN-40, 50’-71’x102�, 29’ Well - Closed, 50’ Well - Open, 40-Ton, Hydraulic Detach.
Spec’s/ Features:
Qty 1 – New Fontaine 55MXT, 55’-76’x102�, 29’ Well – Closed, 50’ Well - Open, 55-Ton, Hydraulic Detach.
• Front Axle Lift
• 48’x102�
ONLY
9,300lb +/-
s
• Aluminum Wheels • LP22.5 Tires
55-Ton 15� Deck Height
• Winch Track on Both Sides of the Trailer
Qty 8 – NEW XL Specialized 55-Ton Hydraulic Detachable Lowboys, 15� Deck Height, 26’ Deck, Rear Lift Axle Available w/Both Standard and Hydraulic Flip Axles. Red, Black and Galvanized in Stock.
• +HQGULFNVRQ 7LUH ,QÀ DWLRQ 6\VWHP
*BEAVER TAIL DROPS*
EAGER BEAVER TAGS Qty 12 – 20XPT, 20-Ton, 21’ Flat Deck, Air Brakes with Spring Ramps (Qty 2 – with Hydraulic Ramps). Qty 4 – 25XPL, 25-Ton with Spring Ramps (Qty 2 – with Hydraulic Ramps).
NEW MANAC S-T-R-E-T-C-H FLATBEDS
*XL SPECIALIZED MINI-DECKS* 4W\ – 53’x102� 40-Ton Minideck, Hydraulic Classic Neck, 33’7� Clear Deck, 12� Loaded Deck Height, Accepts Both Flip Box and Flip Axle, Both Narrow Neck (Pictured) and Full Width Necks Available. 2019 Manac Extendable 48’-80’x102�. Unit # 4411
4W\ – 53’x102� 25-Ton LOW CAMBER Minidecks, Hydraulic Classic Neck with Full Width Top Deck, 33’7� Clear Deck, 12� Loaded Deck Height, Pony Motor, Accepts Flip Axle.
ip s Fl oxe e v B Ha Flip e W s& le Ax
Qty 11 - 53’x102� Dorsey Steel Drops with 53� Beaver Tail, Spring Assist Ramps, Winch Track, Both 22.5 and 17.5.
Qty 7 - 48’-80’x102�, Air Slider & Spring Slider. Qty 1 - 53’-90’x102�, Tri-Axle Air. All with Winch Track and Galvanized Winches.
Qty 6 – Fontaine Workhorse 55LCC, 18� Deck Height, 26’ Well, o/s Alum Wheels, Rear Lift Axle, Some w/ Wheel Covers. Qty 2 – Fontaine Magnitude 55-Ton Drop Side Rail, Rear Lift Axle, o/s Alum Wheels. Qty 1 – Fontaine Magnitude 60LCC, 18� Deck Height, 26’ Well, o/s Alum Wheels, Front Ramps, Rear Lift Axle.
Qty 1 – Fontaine EQI Hydraulic Spreader. Qty 1 – Fontaine Magnitude 60-Ton Beam Trailer, 28’ Beam, Modular Connection at Rear.
2018 Fontaine Magnitude 55L Plus, 26’ in the Well. Unit # 4234 2016 Fontaine Renegade LX40, 29’ in the Well. (Not Pictured) Unit # 4103
*D O R S E Y S T E E L F L AT S S* * Qty 20 - 48’x102� Spring Sliders, Winch Track w/12 Winches, Apitong Floor, Painted Black. $24,975 Incl. FET.
We Rent & Lease all types of Hydraulic Detachable’s, Drop-decks, Flatbeds, Sliding Axles, Extendable (flatbeds & double drops) Dry Freight Vans and more!
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • February 6, 2021 • Page 75
+ PLUS CURRENT
SCHEDULED MAINTENANCE1
+ PLUS
2-YEAR/24K
UPFIT CASH
2
www.jeffbelzerchevy.com
JARRET PETSCH 952-469-7063 JPETSCH@JEFFBELZER.COM Lakeville, MN 55044
JOHN ZADURSKI 952-469-6818 JZADURSKI@JEFFBELZER.COM Lakeville, MN 55044
OFFERS
Page 76 • February 6, 2021 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide
Fontaine Heavy-Haul Magnitude 60LCC Handles 60 Tons Fontaine Heavy-Haul is introducing a new trailer that hauls 60 ton (54 t) loads in 13 ft. (3.9 m) with 4 axles close coupled — the new Fontaine Magnitude 60LCC. The Fontaine Magnitude 60LCC is designed for customers operating in regions where spread axle configurations are not required to maximize their trailer loads. “If local regulations allow a more concentrated load this trailer is a great choice,” explained Todd Anderson, VP sales and marketing. “It can handle 60 tons without adding a flip box or a spreader. This means our customers get a much lighter trailer setup at a much lower acquisition cost. Plus, maneuverability is greatly improved since the overall length is reduced by more than 11 feet compared to a trailer equipped with a flip box, spreader, and 4th axle. With its 60 ton capacity and 18 in. deck height, this trailer is a winner,” Anderson said.
The Fontaine Magnitude 60LCC is designed for customers operating in regions where spread axle configurations are not required to maximize their trailer loads.
However, should the application require a spread axle configuration, the Magnitude 60LCC is ready and able. It is designed to accept a 23 in. (58 cm) flip box and a Fontaine EQ1 spreader with a 4th axle. In this configuration, the trailer can haul 55 tons (50 t) in 16 ft. (4.8 m) with a 125 in. (317.5 cm) swing radius.
Fabricated with 100,000 lb. minimum yield steel flanges, the Magnitude 60LCC is built tough and designed to provide years of reliable service. The trailer boasts a true 26 ft. (7.9 m) clear deck length and a loaded deck height of 18 in. (45.7 cm) with 6 in. (15 cm) of ground clearance. It features a versatile hydraulic removable gooseneck and can be connected and disconnected in a matter of
seconds, not minutes, and it can connect/disconnect on uneven ground, according to the manufacturer. A wide variety of accessories are available, and Fontaine Heavy-Haul dealers can help specify the right configuration for the application. For more information, call 800/633-6551 or visit www.fontainetrailer.com.
Phillips Joins Aspen Equipment as New Territory Manager Aspen Equipment announced that David Phillips will be joining the company as the truck equipment territory manager for Iowa and Nebraska. Phillips brings more than 10 years of experience to the position, selling sign trucks and boom trucks throughout the United States, Canada and Latin/South America. He already is familiar with some of the team at Aspen Equipment in his role as Palfinger’s Midwest regional sales manager of the PAL Pro mechanics truck and PSC Crane product lines. In his new role, Phillips said he is “looking forward to working directly with equipment buyers and operators, having previously worked at the manufacturer/distributor level.” Phillips will draw on his years in the truck equipment industry and his familiarity of the region to promote Aspen Equipment and its capabilities for building and supplying equipment trucks. “I’ll be able to bring strong
(L-R) are Bruce Harrod, Aspen Equipment sales manager; David Phillips; and Todd Foster, president of Aspen Equipment at ConExpo 2020.
product knowledge to the territory and be able to directly manage the buying process to ensure that my customers are getting [the] best solution for their business,” said Phillips. “The people at Aspen have had the pleasure of working with Mr. Phillips throughout his many years in the industry,” said Todd Foster, president of Aspen Equipment. “Over that time, David’s professionalism, positive attitude and unwavering customer service have always impressed. I am thrilled to have him join the Aspen Team and look forward to the success he will bring to the organization and our Iowa and Nebraska customers.” Aspen Equipment, headquartered in Bloomington, Minn., with branches in Iowa and Nebraska, carries equipment trucks for construction, railroads, electric utilities, government, mining and tree care industries. For more information, call 800/888-7671 or visit aspenequipment.com.
Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • February 6, 2021 • Page 77
NO OT ALL T TRAILERS S ARE BU UILT THE E SAME SOM ME ARE STRO ONGER THAN N OTHERS
Our ttrrailers start out tough gh and stay tough so th heyy can safelyy haul yyour equipment q p day after t day, yearr after year. Learn more: towmaster ster.com/more .
Hyd Dump D Drop-De eck
Tilt-Deck
AMER RICA A’S ’S BEST B BUIL LT T TRAILE TRAILERS ERS FOR R PROFESSIONAL HAULER RS
Hyd draulic Tail a
Lowboy
M MORE MODELS • MORE OPTIONS PTIONS • MORE CHOICES
Call 800-462 2-4517 WR ʳQG \RXU QHDUHVW GHDOHU RU YLVLW RQH RI WKHVH
Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com
McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800 Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 Marne 1064 Franklin Street Marne, MI 49435 616-371-7250 www.McCannOnline.com
Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 www.diamondequipment.com
Ziegler CAT 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com
Alta Equipment Company Bryon Center, MI 616-878-7450 New Hudson, MI 248-356-5200 Traverse City, MI 231-714-6210 Detroit, MI 313-394-1811 Flint (Burton), MI 810-744-4840 Gaylord, MI 989-731-9988 Sterling Heights, MI 568-474-5063 Bloomington, IL 309-585-3800 Spring Grove, IL 708-547-7300 Ottawa, IL 815-313-2070 www.altaequipment.com
Page 78 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Missouri DOT Works to Complete Last Leg of I-49 Connector CONNECTOR from page 1
Money for the project includes a $25 million Better Utilizing Investments to Leverage Development (BUILD) federal grant, which Campbell called significant. “Relocation jobs with large amounts of grading and bridges are very expensive. The BUILD Grant allowed this project to achieve the necessary funding to become a reality.” The ongoing construction will relocate the four-lane divided highway to the west of existing Route 71. The new roadway will meet interstate standards with access only at interchanges. “The total I-49 corridor stretches from Alberta, Canada, to Shreveport, La.,” said Campbell. “The current U.S. Route 71 roadway at the Missouri/Arkansas line is a noticeable gap that will be addressed with the I-49 Connector project. This segment of I-49 also provides an alternate route around congested U.S. Route 71. “I-49 forms a vital North-South connection that benefits several states. It not only will improve the freight corridor, but provides more efficient travel for commuters and recreational travelers.” Completing the final miles of I-49 in Missouri between Pineville and the Missouri/Arkansas border involves earthwork, construction of bridges and concrete paving. Relocating the four-lane divided highway to the west of existing Route 71 includes 236 acres of tree clearing; 1,300 ft. of large triple-box drainage culverts; more than 9,300 ft. of smaller drainage culverts (5,100 ft. of box culverts and 4,200 ft. of pipe culverts); and a single-span bridge that’s 83 ft. long, with MSE wall abutments to carry I-49 northbound over U.S. Route 71 southbound. The work also calls for a single-span bridge with MSE wall abutments to carry Missouri Route 90 over I-49; a diamond interchange at I-49 and Missouri Route 90; 4.7 million cu. yds. of total excavation; 185,000 sq. yds. of 9-in., non-reinforced concrete pavement on 18-in. rock base; 18,500 sq. yds. of 10-in. Superpave on 18-in. rock base; more than 52,000 sq. yds. of concrete shoulder; roughly 14,000 ft. of guardrail; and in excess of 23,000 ft. of concrete traffic barrier. “The greatest challenge would be meeting the aggressive schedule as set in the contract,” said Campbell. “Emery Sapp & Sons Inc., the prime contractor, is dedicated to meeting the deadline and has many crews working day and night. With this aggressive schedule, it requires a high level of communication at all times, and that our construction inspectors be very flexible as new schedules arise.
MoDOT photo
Crews are working six days a week on a $70 million project that will complete the final 5 mi. of I-49 in Missouri between Pineville and the Missouri/ Arkansas border.
“Varying field conditions also have proven challenging, such as rock elevations varying from the planned elevations. Our team of engineers, geologists and inspectors must quickly work with the contractor to address the differences by taking actions that
could include exploratory drilling or creating new cross sections based on the data we find. “The project is on schedule and running smoothly. To date, the majority of the work has involved moving earth. During the construction of the ‘high fill’ areas, several strucMoDOT photo
When the I-49 Connector is completed, I-49 will stretch 290 mi. between Kansas City and Fort Smith, Ark.
tural boxes were required for drainage under the new interstate. We also are focusing on the new bridge where I-49 will cross under Missouri Route 90. The bridge at this interchange will be supported by two mechanically stabilized earth walls. The girders have been set and are in place, and preparations are being made to pour the concrete.” The majority of the earthwork and the drainage structures have been completed. The main items remaining include the completion of the bridges and 5 mi. of concrete paving. Equipment being used on the job includes D9, D10 and D11 Caterpillar dozers; 745C and 775F Caterpillar haul trucks; a 651E Caterpillar earth mover/scraper; 825C Caterpillar compactors; and 349E Caterpillar excavators. The heavy machinery is being used for unclassified excavation, compacting embankment and placing rock fill base. “The majority of the project involves moving earth,” said Campbell. “Concrete and steel would account for the majority of the materials being brought into the project, including concrete for five miles of paving and concrete/steel for the structures, which include MSE walls and bridges. “Excavation has progressed quickly. The contractor mobilized some of the largest excavation equipment made onto the construction site. It’s estimated there will be 3,648,900 cubic yards of unclassified excasee CONNECTOR page 84
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 79
The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195
2020 Takeuchi TB 250-2, Cab with heat and A/C, 39 hp T4 Yanmar diesel, 15.7" wide rubber tracks, dozer blade, dual acting aux. hydraulics, main pin hydraulic thumb, Werk Brau manual coupler, 11,288 lbs operating weight.........................$58,900 3-4 JM Call Steve 262-373-2151
2017 Link-Belt 160x4, 112hp Isuzu T4 diesel, cab with A/C and heat, 24" wide steel tracks, Geith quick coupler, multi function hydraulics, 8' 7" stick, 19' 11" dig depth, 29' 1" reach, 38,400lbs, remote care............................................................$104,000 3-4 JM Call Steve 262-373-2151
2019 Hitachi ZW 150-6, 3.0 cy Performance GP bucket, 141 hp Cummins diesel, JRB 416 coupler, Michelin 20.5R25 L3 radial tires, 3rd spool, ride control, limited slip differentials, block heater, Global e-Service telematics system, 27,010 lbs operating weight ........................................$142,400 3-4 JM Call Steve 262-373-2151
2011 Volvo SD45D, 84hp Kubota diesel, 54" drum, 22,000# force, 12.4x24 tires, 2 speed, OROPS, 10,600# weight ............................................$35,500 3-4 JM Call Steve 262-373-2151
2015 Leeboy 8500C, s/n 122257, 2750 Hrs, Paving Width 8’-15’, Heated Screed, Legend Screed System ............................................$54,900 3-4 JM Call Steve @ 630-878-8765
2018 Carlson CP130, s/n 109DB8P, 520 Hrs, Contractor deluxe package.......................$179,900 call STEVE @ 630-878-8765 3-4 JM
2014 Ditch Witch SK755, 1400 Hrs, wide tracks, 32.5 hp turbo engine, pressure relief hyd. couplers, 44” dirt bucket..............................................$22,400 Call Jeff @ 630-665-5600 3-4 JM
Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 3-4 EB
2015 Grove GHC 55 Tele Crawler, 55 Ton, 100’ Main Boom + jib Aux Hoist, Certified 2500 Hrs, original owner, Cleveland, Ohio.....................CALL Call Andy Forepaugh 216-316-1511 3-4 EB
2014 Manitowoc 8000 80 Ton Crawler, Request Boom Jib Combination Certified, Cleveland, Ohio ... .......................................................................CALL Call Andy Forepaugh 216-316-1511 3-4 EB
2017 New Holland C232, 2 Speed, Open ROPS, EH Controls, Block Heater, Turn Signals, 78” Low Profile Bucket with Bolt on Edge dwietbrock@ronsonequipment.com 3 JM
2016 Hyundai HX160L, One owner, 10’ 2’’ Long arm, 137 HP Perkins Engine, 3,300 hours...$72,000 3 JM Call George 219-696-8911
1994 Blaw Knox PF150 8’ Paver with Deutz Diesel Engine, 8’ screed with hydraulic strike offs, 2004 Ingersoll Rand DD16, 3400 hours, 35” double drum roller ................................................$6,000 approximately 2,900 hrs use...............$15,00 as is 3 JM 800-283-1336 3 JM 800-283-1336
2010 Ingersoll Rand DD24, 2400 hours, 47” dou- 2017 DD120C, w/Intelligent Compaction and Pass ble drum roller ................................................$9,50 Counting, #7540 ...........................................$97,000 3 JM 3 JM 800-283-1336 800-283-1336
Here's how the BARGAIN ADS Work: • • • •
Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. Either email your copy & photo to: production@cegltd.com, or mail to:Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. Cost is $135 per ad, $60 additional for color. Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at
800/523-2200
2017 Komatsu PC240LC-11, 177 HP, 56,360# operating Weight, 19' 2" Boom, 11' 6" Arm, 31.5" Grouser, EROPS, Heat, AC, Rear View Camera, 1 or 2 Way Aux Hyd, Center Roller Guards, Hyd Quick Coupler, Auto Lube System, 28" Toy Bkt w/Teeth, 2 Buckets, Komatsu Care Certified, 12 Month 1,000 Hour Premier Warranty Good Through 12-31-20 ....................................$247,500 Call Dan Rude 605-336-0411 3-4 PK
Page 80 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: CATERPILLAR 12H MOTOR GRADER - PLEASE I NEED ANY 12H. EMAIL: NANI.SAADAN@YAHOO.COM PHONE: +1 240-397-8180 –––––––––––––––––––––––––––––––– WANTED (US): KOMATSU D65EX-17 CRAWLER DOZER. WANT TO BUY BULLDOZER FROM USER ONLY KOMASTU 65EX 17 WITH RIPPER UNDER 2000 HOURS; MY BUDGET IS UNDER $85000 CDN. OR 700JXL WINCH UNDER 500 REAL HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (US)L GRADALL XL 4100 II EXCAVATORS - LOOKING FOR BOOM ASSEMBLY FOR A II SERIES GRADALL. EMAIL: MIKECROSS2005@AOL.COM PHONE: 703-759-2172 –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE BULLDOZER 700JXLTT OR 700JLGP UNDER 900 HOURS. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA; PHONE: 1-450-346-8975 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 312 EXCAVATORS. EMAIL: SANTIAGOSFLC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATORS; I AM LOOKING TO BUY USED HITACHI EXCAVATORS LIKE EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (OH): KUBOTA ATTACHMENTS - LOOKING FOR A LA854 FRONT LOADER FOR MY L5740 TRACTOR. EMAIL: CHASTUSTIN@GMAIL.COM; –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODLES BOBCAT SKID STEER LOADERS; LOOKING FOR AN OLDER, BUT OPERATIONAL SKID STEER LOADER TO USE FOR YARD CLEAN UP. EMAIL: TYLER.SMITH@ CERTIFIEDBOOMREPAIR.COM; PHONE: 813-393-6253 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): MOXY MT30S3 OFF-HIGHWAY TRUCKS - LOOKING FOR REAR END DIFFERENTIAL FOR 30TON MOXY EMAIL: HARRY.SCHUMACK@GMAIL.COM; PHONE: 860-669-7115 –––––––––––––––––––––––––––––––– WANTED (US): INJECTION PUMP FOR A KOMATSU D375A-3 DOZER SERIAL NUMBER 17251 INJECTION PUMP 616275-2111 INJECTION PUMP 6162-75-2100. EMAIL: KOVACSBROTHERS1980@GMAIL.COM; PHONE: 863-425-5022 ––––––––––––––––––––––––––––––––
WANTED (US): NEED CAT 966F WHEEL LOADER ANY CONDITION IS PREFERABLE. OFFER US ANY CONDITION YOU HAVE AVAILABLE. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (TX): CRANE BOOM - NEW, USED, SURPLUS, DAMAGED- FOR ALL CURRENT US CRANE BRANDS: AMERICAN/TEREX, KOBELCO, LINK BELT, MANITOWOC. EMAIL: SALES@CRANELIQUIDATORS.COM; PHONE: 281-583-BOOM (2669) –––––––––––––––––––––––––––––––– WANTED (NC): ALL MODELS BROWN MOWERS; LOOKING TO BUY BROWN PRODUCTS LIMB TREMOR TREE SAW, PREFER 30 INCH MODEL, DEMO MODEL OR SLIGHTLY USED MACHINE. EMAIL: NORWOOD1310@GMAIL.COM; PHONE: 910-289-1310 –––––––––––––––––––––––––––––––– WANTED (MA): INGERSOLL RAND BL 570 BACKHOE LOADER. WOULD CONSIDER ANYWHERE IN NEW ENGLAND. EMAIL: LARRY@MARKONEINC.COM; PHONE: 978-441-0010 –––––––––––––––––––––––––––––––– WANTED (NORTHEAST): DROP DECK FLATBED TRAILER O/A LENGTH 30-36 FEET EMAIL: RIMROCK.TRUCKING@YAHOO.COM; PHONE: 917-478-3250 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): KOMATSU PC300-5K EXCAVATOR. EMAIL: EXPERSITUA@HOTMAIL.COM; PHONE: +351918747931 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: SALES3GCESEQUIPMENT@GMAIL.COM PHONE: 657-274-8724 –––––––––––––––––––––––––––––––– WANTED (CA): KOMATSU D575A-3SD CRAWLER DOZER. EMAIL: TONYTHOMAS@ PACIFICCRANES.COM; PHONE: 1-818-956-5231 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS STEDMAN MISCELLANEOUS AGGREGATE LOOKING FOR 4 ROW CAGEMILL. EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): LANDOLL AXLE TRAILERS, ALL MODELS. EMAIL: MARK@CHAMPION SERVICESFL.COM PHONE: 407-947-1355 –––––––––––––––––––––––––––––––– WANTED (NY): RAWSON 40, 50 OR 60 FOOT STACKING CONVEYOR, 230 VOLT ELECTRIC. EMAIL: JIM@JRPINC.BIZ PHONE: 518-858-1103 ––––––––––––––––––––––––––––––––
WANTED (NC): TEREX TA3 OFF-HIGHWAY TRUCK - NEED A COUPLING FOR 1998 TEREX TA30 ARTICULATED DUMP TRUCK (PART # A7341286). EMAIL: INFO@LOCKELANECONSTRUCTION.COM PHONE: 704-585-6625 –––––––––––––––––––––––––––––––– WANTED (FL): WIRTGEN W2000 COLD PLANERS / MILLING MACHINES - ONE OF OUR CUSTOMERS NEEDS A WIRTGEN W2000, OR SIMILAR, IN VERY GOOD WORKING CONDITION. IF YOU HAVE IT, PLEASE SEND US A QUOTATION AND INCLUDE FULL SPECIFICATIONS, HOURS, MAINTENANCE REPORTS AND ACTUAL PICTURES. EMAIL: JUANBOERI@ EQUIPMENT-AND-PARTS.COM PHONE: 954-681-9551 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F WHEEL LOADERS - I NEED TO BUY CAT 966F 2 ANY CONDITION ALL OVER USA AND CANADA. EMAIL: IKCEQIPMENTS@GMAIL.COM PHONE: 00923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 777F OFF-HIGHWAY TRUCK. LOOKING FOR CAT777F - JUST MODEL F EMAIL: COMERCIAL@SOLUCOESRB.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADER; LOOKING TO BUY CAT 966F 2 ANY CONDITION. EMAIL: IUKANDCO@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): MANUFACTURER CATERPILLAR 966F II WHEEL LOADER. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92 332 248 9350 –––––––––––––––––––––––––––––––– WANTED (TX): KOMATSU FORKLIFTS, ALL MODELS. WANT TO BUY TRANSMISSION AND FLYWHEEL FOR KOMATSU FOR FG25C GAS 5000 FORKLIFT. EMAIL: DJ@AMERICANRENTALODESSA.COM; PHONE: 432-362-7603 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR, DEERE, KOMATSU, BOBCAT, CASE, VOLVO WHEEL LOADERS, ALL MODELS. EMAIL: PURCHASESOFFICIAL@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): JOHN DEERE 690B EXCAVATOR. READY TO BUY TODAY! LOOKING FOR ANY YEAR JD 690B WIDE OR NARROW. LET ME KNOW WHAT YOU GOT! EMAIL: INTERSTATEMEE@ SBCGLOBAL.NET; PHONE: 815-469-4988 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 980H WHEEL LOADER; LOOKING TO BUY CAT LOADER 972-970F-966-950-936. EMAIL: HUJIJIENTERPRISES@GMAIL.COM ––––––––––––––––––––––––––––––––
WANTED (US): HITACHI ZX200E EXCAVATOR. URGENTLY LOOKING FOR USED HITACHI EXCAVATOR 200,300 AND 400 SIZES EXCAVATORS EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS; LOOKING TO BUY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE. EMAIL: EASTGROUPEQUIPMENT @OUTLOOK.COM –––––––––––––––––––––––––––––––– WANTED (NY): DETROIT DIESEL ENGINE – MODEL 353, USED OR REBUILT. EMAIL: PPIERCECON@AOL.COM; PHONE: 518-466-3027 –––––––––––––––––––––––––––––––– WANTED (TN): FORD 4610 TRACTOR, FRONT END LOADER. EMAIL: JUSTIJA.JJ@GMAIL.COM; PHONE: 941-661-1799 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966E WHEEL LOADER. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: RTUBE902@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (TX): CORNELL 6NNT-RP PUMPS EMAIL: JTLABORDE@ LABORDEPRODUCTS.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR EXCAVATORS – WHEEL LOADERS, GRADERS, ALL MODELS. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR WHEEL LOADERS, ALL MODELS. LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE WITH ANY CONDITION. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (FL): FORD NEW HOLLAND BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, ANY MANUFACTURER/MODEL - TOTAL COST + DELIVERY $7,500 OR LESS. BE NICE IF HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S. FLORIDA IF YOU WANT WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. (YOU FILE W/IRS: COMBINED TOTAL MARKET VALUE.) CAN WRITE 2ND LETTER OF THANKS FOR DELIVERY. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. ––––––––––––––––––––––––––––––––
WANTED: CATERPILLAR OFF-HIGHWAY TRUCK, MODEL 777F. EMAIL: NASCIMENTORENATOF@GMAIL.COM; PHONE: +5511942017728 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR MOTOR GRADERS, ALL MODELS, ANY CONDITION. EMAIL: HARTWORLDEQ@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): JOHN DEERE BACKHOE LOADERS, ALL MODELS. LOOKING FOR GOOD RUNNING LOADER/BACKHOE, FARM OR CONSTRUCTION, ANY MANUFACTURER/MODEL: TOTAL COST & DELIVERY $7,500 OR LESS. UGLY IS OK; I'LL PAINT, FIX ROOF, ETC. BE NICE IF IT HAS ATTACHMENTS (OR CAPABILITY FOR); TOP 3 (IN THIS ORDER) ARE: AUGER, BRUSH HOG, & BOX GRADER (GRAPPLE ON EITHER BUCKET WOULD BE USED). SMALL CHURCH IN S FLORIDA WITH TAX-EXEMPT STATUS IF YOU NEED A WRITE-OFF; CHURCH TREASURER WILL SEND LETTER OF THANKS FOR DONATION OF A XXX (MAKE/MODEL/YEAR) LOADER BACKHOE WITH X ATTACHMENTS. HALIEUS@HOTMAIL.COM; PHONE: 954-445-9930. –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR EXCAVATORS, ALL MODELS. LOOKING TO BUY USED CONTRACTION WITH WHOLESALE. EMAIL: HUJIJIENTERPRISES@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU EXCAVATORS, ALL MODELS. LOOKING TO PURCHASE ANY HEAVY EQUIPMENT OR TRUCKS! EMAIL: JDLANDWORXEQ@GMAIL.COM; PHONE: 910-585-1608 –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAS AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS. ALSO WE BUY OLD CAT MACHINES. EMAIL: USA@GCESEQUIPMENT.COM; PHONE: 657-236-7707 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 988A WHEEL LOADER. I SEEK TO PURCHASE A CAT 988A THAT IS IN WORKING ORDER, WITH GOOD TIRES AND A BUCKET WITH TEETH. EMAIL JIMTHORNTON@STNY.RR.COM OR CALL 607-483-2383. ––––––––––––––––––––––––––––––––
WANTED (PA): FORD F250 SUPER DUTY PICKUP TRUCK, WITH 6.4 DIESEL, ANY CONDITION. EMAIL: HARLOWCONTRACTING@YAHOO.COM OR CALL 267-738-5984. –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS OF CATERPILLAR CRAWLER LOADERS OR ANY USED CONSTRUCTION EQUIPMENT WITH WHOLESALE PRICE. EMAIL AMERICAUSEDEQUIPMENT@ GMAIL.COM OR CALL 657-236-7504. –––––––––––––––––––––––––––––––– WANTED (PA); GARWOOD 75B CRANE, ANY CONDITION OR ANY ATTACHMENTS. CALL 267-738-5984 OR EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): KOEHRING 1066 EXCAVATOR, ANY CONDITION. CALL 267-738-5984 EMAIL HARLOWCONTRACTING@YAHOO.COM. –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE 860 SCRAPER TRANSMISSION, ANY CONDITION. CALL 267-738-5984 EMAIL HARLOWCONTRACTING@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): AKERMAN MOTOR GRADERS, ALL MODELS. (WORKING OR NON). EMAIL: HIEEQUIPMENT@GMAIL.COM; PHONE: 775-235-8837 –––––––––––––––––––––––––––––––– WANTED: 3-AXLE, HEAVY DUTY LOW BOY TRAILER FOR HAULING A CAT 963. EMAIL: BENHOOVER@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CT): CASE 1455B CRAWLER LOADER. EMAIL: HENRYINDUSTRIES@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (IL): NEED MANUALS AND PARTS FOR 1970 BARBER-GREENE TF-30 DRAINAGE TRENCHER (TILING MACHINE). EMAIL: JL.FOMAC@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 ––––––––––––––––––––––––––––––––
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 81
FEBRUARY/MARCH 2021 CRANE SAFETY COURSES February 15 – February 16, 2021 Overhead Crane Operator Training, Cincinnati, OH February 15 – February 17, 2021 Rigging Inspector Training, Orlando, FL February 15 – February 19, 2021 Mobile Crane Operator Training, Houston, TX February 22 – February 23, 2021 Qualified Signal Person Training, Houston, TX February 22 – February 25, 2021 Overhead Hoist Maintenance Training, Cincinnati, OH February 24 – February 26, 2021 Forklift Operator Train The Trainer, Orlando, FL March 1 – March 4, 2021 Mobile Crane Inspector Training, Orlando, FL March 2 – March 3, 2021 Forklift Operator & Inspector Training, Houston, TX March 2 – March 5, 2021 Overhead Crane Train The Trainer, Cincinnati, OH March 8 – March 9, 2021 Qualified Signal Person Training, Cincinnati, OH March 8 – March 11, 2021 Overhead Hoist Maintenance Training, Orlando, FL March 8 – March 12, 2021 Mobile Crane Operator Training, Kansas City, MO March 10 – March 12, 2021 Qualified Rigger Level 2 Training, Cincinnati, OH To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com NATIONAL UTILITY CONTRACTORS ASSOCIATION (NUCA) 2021 NUCA Annual Convention & Exhibit Dates: February 4 – 6, 2021 Location: Naples Grande Beach Resort 475 Seagate Dr., Naples, FL NUCA is headed back to the Naples Grand Beach resort for our 2021 annual meeting & convention. We are excited to revisit an amazing property located on the beautiful beaches of Florida for another terrific convention! It’s time to get out of the office and talk shop with your fellow NUCA contractors from across the country who, as company principals, face the same problems you do every day.
Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. Problem solving with fellow NUCA members can energize you so you can step back into the office and tackle your business with a new perspective, galvanize your employees, and use what you’ve learned to improve your day-to-day operations. Online Registration Remains Open! On-site Registration Begins Feb. 4 For more information on the annual NUCA Convention & Exhibit, please contact Chris Barrett at chris@nuca.com or phone 703.358.9300. ASSOCIATION FOR THE WORK TRUCK INDUSTRY (NTEA) Work Truck Week 2021 (WTW21) Dates: March 8–12, 2021 Description: For more than 20 years, commercial truck manufacturers, distributors, upfitters and fleet managers have come together at The Work Truck Show® to see what’s new, hear what’s coming, and learn from each other the latest trends and ways to improve their operations and increase efficiency. Work Truck Week 2021 (WTW21) is a reimagined way to connect the commercial vehicle community and provide the product news, market trends and operational insights you’ve come to expect from North America’s largest work truck event. WTW21 will offer the industry access to: • Latest information on work trucks, equipment and other new products • Exclusive updates from leading chassis manufacturers • Analysis of relevant economic and market trends • New sustainable vehicles and technology • Opportunities to connect with industry-leading manufacturers and suppliers • Dedicated updates from chassis manufacturers producing battery electric work trucks Registration is OPEN! Visit https://www.worktruckshow.com/2021 and sign up to
receive WTW21 details as they become available. Email info@ntea.com for additional information. ASSOCIATED BUILDERS AND CONTRACTORS (ABC) 2021 ABC Convention Dates: March 9–11, 2021 Location: Gaylord Texan Resort & Convention Center 1501 Gaylord Trail Grapevine, TX 76051 Description: ABC Convention 2021 is tailored to you, the ABC member. This is your opportunity to gain valuable industry insights, network and celebrate with fellow ABC members—merit shop contractors from across the country—and leave feeling energized and empowered for the year ahead. We’re opening ABC Convention 2021 with a powerful message from inspirational speaker Jon Dorenbos. Jon’s story of turning tragedy into triumph and overcoming life-or-death challenges with grace, persistence and a childlike sense of wonder is the perfect message for these challenging times. Join us in heading into 2021 with optimism and enthusiasm. ABC Convention 2021 has prepared a thoughtful program complete with engaging and insightful events that we’ve curated to adapt to and anticipate the changing times. From four engaging keynote speakers to top industry insights, the Excellence in Construction® Awards Gala, and a golf tournament to benefit the Trimmer Construction Education Fund at Cowboys Golf Club, we are planning an event that will inspire and energize the merit shop for the year ahead. All attendees who wish to attend ABC Convention 2021 in person must register by Friday, Feb. 19. After that date, only virtual registration will be available until Monday, Mar. 1. NOTE: Space is limited due to social distancing require-
ments, and in-person registrations will be accepted on a first-come, first-served basis. Visit abcconvention.abc.org. ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) 2021 AED Summit (Virtually AND In-Person) Dates: May 24–May 26, 2021 NEW DATES! Location: The Mirage Hotel Las Vegas, NV Description: AED is bringing the 2021 Summit to the lively city of Las Vegas, where the sky is the limit! Summit is the industry’s safest interactive and innovative equipment distribution event in North America. The health and safety of our members, employees and partners are AED’s highest priority. We have securely designed three full days of education, featured presentations, meeting spaces and networking opportunities specifically with our dealers in mind. 2020 was a learning curve for us all, but you do not have to figure it all out on your own. Find out where the industry is headed so you can be at the forefront by attending the AED Summit. The AED Summit is your annual opportunity to come together with professionals across the heavy equipment industry spectrum to improve yourself and your team and to build meaningful connections. Attendees can choose how they would like to attend this year; that’s right, you have options! We are offering an inperson or virtual registration to accommodate our members’ needs for the same price. Regardless if you choose to join us in Las Vegas or to view from the comfort of your office Registration starts on Dec 30, 2020 and ends on May 22, 2021. Late registration starts on May 23, 2021. Room blocks for the new dates of 2021 AED Summit are now available. Attendees can choose to change their in-person registration to a virtual registration at any time. If you wish to do so, please email help@aednet.org to inform the AED team. For more information and to register for this event, please visit https://aednet.org/events/summit. If you need assistance registering, please call 800-3880650.
Events are subject to change, check websites for updates
Tenna to Sponsor, Exhibit During NUCA’s Annual Convention, Exhibit in Florida Tenna, a construction technology platform that revolutionizes equipment fleet operations, announced it will be sponsoring and exhibiting at the NUCA Annual Convention and Exhibit in Naples, Fla., Feb. 4 to 6, 2021. Tenna will be showcasing its latest and most exciting products and features to date, including the TennaCAM tracker and related safety camera functionality, enhanced inspections functionality and integrations capabilities with AEMP/OEMs, project management and SaaS platforms, and accounting systems. “We are excited to be a part of the NUCA convention for the first time this year with our sponsorship, speaker introduction and exhibit as we get more involved in the NUCA organization. And while safety is top of mind for us, our team is looking forward to safely meeting leaders and members of local NUCA chapters that will be in attendance, in addition to contractors interested in learning more about our
“We are excited to be a part of the NUCA convention for the first time this year …” Russ Young Tenna
products and services at our first inperson event of the year,” said Russ Young, VP of Growth. Tenna invites everyone to stop by Booth #47 to meet the team and learn more about their newest features and enhancements, and to attend the
Utility Construction Economic Outlook session on Feb. 6, 2021, where Russ Young will be introducing speaker Anirban Basu, chief economist of Associated Builders and Contractors and chairman of Sage Policy Group. One Platform to Know More, Control More, Make More Tenna’s One Platform solution coupled with its family of integrated hardware can track, process, automate and inform contractors on how to improve the management of their entire mixed fleet. A complete range of hardware solutions allows Tenna to customize a solution that will match each of its customer’s needs. Contractors no longer need to spend money on multiple, disjointed tracking systems. Tenna ties multiple tracking and management functionality with mixed construction assets together into one platform. For more information about Tenna, visit www.tenna.com.
Page 82 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Orlando, FL January 30 – February 7, 2021 For: 28th Annual Florida Rental Return Auction • Houston, TX February 25-March 4, 2021 For: Late Model Rental Fleet Construction Equipment & more
Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com
• Ft. Worth, TX Thurs., March 11, 2021 For: Late Model Construction Equipment & more
• Houston, TX February 9 - 10, 2021
• Dallas, TX Fri., March 12, 2021 For: Late Model Construction Equipment & more
• Orlando, FL February 15 - 20, 2021
• Las Vegas, Nevada Sat., March 13, 2021 For: Late Model Construction Equipment & more • Englewood, NJ Wed., March 17, 2021 For: Late Model Construction Equipment & more • Fulton, NY Thurs., March 18, 2021 For: Late Model Construction Equipment & more • Parkersburg, WV Fri., March 19, 2021 For: Late Model Construction Equipment & more • Houston, TX Wed., March 24, 2021 For: Late Model Construction Equipment & more • San Angelo, TX Thurs., March 25, 2021 For: Late Model Construction Equipment & more • Central Connecticut Sat., March 27, 2021 For: Construction Equipment Retirement Auction • Hauppauge, NY Tues., March 30, 2021 For: Late Model Snow & Construction Equipment • Knoxville, TH Wed., March 31, 2021 For: Late Model Construction Equipment & more
• Tipton, CA February 12, 2021
• Phoenix, AZ March 5, 2021 ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061
EURO AUCTIONS USA www.euroauctions.com 770-683-3883 • Brisbane, Australia February 18, 2021 • Dromore, Northern Ireland February 19-20, 2021 • Leeds, UK March 10-13, 2021 • Dubai, UAE March 22, 2021 • Zaragoza, Spain March 24, 2021
• ONLINE ONLY HESS AUCTIONEERS Ends Mon., February 8 For: Town of Lowville, NY Surplus www.hessauctioneers.net 866-511-2493 Auction • Marietta, PA • ONLINE ONLY Fri., February 12, 2021 Ends Mon., February 8 For: Trucks, Trailers & Equipment For: 1996 Simon-Duplex LTI Consignment Auction Ladder Tower Truck Auction BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • ONLINE ONLY February 13, 2021 • ONLINE ONLY February 26, 2021 • ONLINE ONLY March 13, 2021 • ONLINE ONLY March 26, 2021 BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY February 9, 2021 • ONLINE ONLY February 16, 2021 • ONLINE ONLY February 23, 2021
RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631
BIG IRON www.bigiron.com 800-937-3558
All our auctions are now online bidding only!
• ONLINE ONLY February 10, 2021
I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE ONLY Wed., March 3, 2021 For: Heavy Equipment, Truck & Trailer Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • ONLINE ONLY Tues., February 9, 2021 For: Timed Equipment Auction • ONLINE ONLY Thurs., February 11, 2021 For: Timed Equipment Auction • ONLINE ONLY Tues., February 16, 2021 For: Timed Equipment Auction • ONLINE ONLY Tues., February 17, 2021 For: Online Surplus and Forfeiture Auction • ONLINE ONLY Tues., February 23, 2021 For: Timed Equipment Auction • ONLINE ONLY Tues., February 25, 2021 For: First Capitol Premier Auction: Dixon, CA
JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Kissimmee, FL February 8-10, 2021 For: 47th Annual Florida Auction • Pelzer, SC March 25, 2021 For: East Coast Spring Construction & Transportation Public Auction JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Cope, SC Sat., March 13, 2021 For: LowCountry Heavy Equipment Public Auction • Barnwell, SC Wed., April 14, 2021 For: One-Owner Liquidation Public Auction for SRA Track LLC LLOYD MEEKINS & SONS AUCTION CO. www.meekinsauction.com 800-499-6560 • Lumberton, NC Tues., April 6, 2021 For: Heavy Equipment Public Auction MOTLEYS INDUSTRIAL www.motleys.com 1-877-MOTLEYS • ONLINE ONLY Fri., February 19, 2021 For: Southern States Multistate Auction with 150+ lots | Propane Trucks, Fuel Trucks, Fuel Trailers, & More! • ONLINE ONLY Tues., February 23, 2021 For: Construction Equipment & Trucks, Trailers, Dozers, Tractors, Crawlers, & More! • ONLINE ONLY Tues., March 16, 2021 For: Construction Equipment & Trucks, Trailers, Dozers, Tractors, Crawlers, & More!
PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Wed., March 3, 2021 For: Ag Equipment Auction • ONLINE ONLY Thurs., March 4, 2021 For: Truck and Trailer Auction RES AUCTION SERVICES www.RES.bid 833-SOLD-RES • Wooster, OH Sat., March 6, 2021 For: RES Equipment Yard 27th Annual Hillsdale FFA Alumni Consignment Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN March 13, 2021 For: Heavy Machinery Auction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY February 5 - 10, 2021 For: Timed Online Auction • ONLINE ONLY March 23 - 30, 2021 For: Farm Retirement Auction • ONLINE ONLY March 24-30, 2021 For: Farm Retirement Auction • ONLINE ONLY March 24 - 31, 2021 For: Steffes Construction Consignment Auction • ONLINE ONLY April 1-9, 2021 For: Farm Retirement Auction • ONLINE ONLY April 14-21, 2021 For: Farm Retirement Auction • Sidney, MT April 21, 2021 For: Rental Services Retirement Auction YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 10 - 13, 2021 For: 47th Annual Florida Auction • Baltimore, OH March 11, 2021 For: Heavy Equipment Auction
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 83
Fabick Keeps Kenny’s Cats Running
Over the years, he’s owned only Cat machines and currently owns a D6C, a D6D and a Cat backhoe.
Through the years, Kenny Nichols has worked on every type of job imaginable — from clearing land for buildings and roads, to moving dirt for stock ponds and lakes. KENNY from page 8
Caterpillar and Fabick team behind them — Dad couldn’t have cared for Mom. And the machines enabled him to make enough money to pay her medical bills. “So, growing up, those dozers were like members of the family. We cherished them and took care of them, just like they took care of us.” Willadean passed away nearly 24 years ago, but her love for life and remarkable legacy lives on. Today, at age 91, Nichols continues working every day at the job he has loved for a lifetime. The family estimates that he’s spent more than
110,000 hours operating dozers — possibly claiming the record for logging the most hours operating a bulldozer. And those Cat machines? They just keep on running. “You can’t find machines that are any better. You can afford to pay more for a Cat machine because it’s cheaper in the long run. They last longer and they handle better. They prove themselves,” said Nichols. Does he think about retiring anytime soon? “Why quit something you like doing,” Nichols said. This story was reprinted with the permission of Caterpillar Inc.
During his service in Korea, Kenny Nichols ran a Caterpillar dozer.
“You can’t find machines that are any better. You can afford to pay more for a Cat machine because it’s cheaper in the long run. They last longer and they handle better. They prove themselves,” said Kenny Nichols.
www.dunndealauctions.com
Page 84 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Form-A-Tube: New Invention Could Be Answer to Decaying Infrastructure Needs Terrebonne Parish, La., like many jurisdictions around the country, needs billions of dollars to repair decaying infrastructure. Of urgent concern are structurally endangered pilings — the columns that hold up highways, bridges, piers, pipes, even buildings. One contractor in Houma, La., charged with repairing a vulnerable water pumping station turned to a new paradigm-changing approach that is effective, economical and faster than any existing technology — and was surprised at the results. It’s called Form-A-Tube, a new invention developed by Centennial Professor of Civil Engineering at the University of Arizona, Mo Ehsani. Form-A-Tube allows contractors to instantly construct forms for shoring up pilings with cement. The system builds forms of any size on site, making it easy to use even in remote locations. “This stuff is so modular you can take it down into 6½-inch strips, and
put it together on site,” said Harvey Sharp, whose company BCG Services is handling the water pumping station in Houma, La. “It’s second to none.” According to Sharp, using Form-ATube stands in sharp contrast to current methods for building forms for concrete, which he described as bulky, heavy and full of fiberglass. In addition, with the Form-A-Tube system, the pumping station continued operating throughout the repairs. “It takes a quarter of the time that it would take to do a regular bridge repair,” said Sharp, who added that his clients love it. “If you had to remove the pilings, it would take months. Not only did Form-A-Tube save time, but saved the client’s money. It’s a nobrainer, and I think that’s the future.” Sharp plans on using this product on other projects in 2021. Ehsani had set out to find a more efficient way to strengthen bridge pilings, but also wanted to develop an approach that was friendly to the envi-
ronment. In contrast with standard cardboard and fiberglass forms that have to be shipped in on 18-wheeler trucks and can only be used once, Form-A-Tubes are reusable. “One of the problems with cardboard tubes is that they are pre-made to specific sizes and heights, which is a challenge for contractors and difficult to transport,” said Ehsani. “Each FormA-Tube piece has unique ribbing that can be placed inside the form and left in place, creating an attractive and almost impermeable outer shell. Or the tube can be placed on the outside so once the concrete filling has hardened, the pieces can be removed — and reused.” In a region with unprecedented hurricane destruction and economic challenges and an era of decaying infrastructure across the nation, Form-ATube brings new hope for affordable and fast solutions, according to the company. For information, visit www.Form-A-Tube.com.
Form-A-Tube panels can be custom-ordered to any length. However, one of the main features of this product is that shorter pieces of various lengths also can be assembled (by staggering the joints like tiles) to create a tube of virtually any length.
Crews Clear Timber, Move Earth to Expand I-49 in Mo. CONNECTOR from page 78
vation and 3,558,810 cubic yards of compacting embankment.” Before work began, the majority of the land was timber. Prior to disturbing the site, environmental clearances and subsurface investigations were performed. Before construction of the road, erosion control devices were installed and the timber was cleared. Campbell noted that MoDOT is working with the Arkansas Department of Transportation to complete the project. “We have a very good relationship with our neighbors to the south,” said Campbell. “They also have a couple of projects under construction that, together with our project, will complete the corridor. I believe both states are focused on improving the safety of the region and completing the interstate. Our construction team has worked closely with them throughout the project.” As for the effect on area motorists, said Campbell, “In The I-49 Connector project calls for 4.7 million cu. yds. of total excavation.
Missouri the impacts have been minimal, because this is a relocated corridor. We have a detour for Missouri Route 90, and we also used rolling roadblocks during blasting operations to close I49. All of that went very well. Motorists are handling it well.” According to Campbell, MoDOT has been working on the I-49 corridor since the early 1990s. “The expense of these types of projects is high, and therefore, very difficult to fund in addition to our asset management needs. It can be costly to maintain the assets we have and keep them in their current condition, which can move large expansion projects further down the priority list due to funding constraints. I am thrilled that we found a way to deliver this project, because I know how beneficial it will be in so many ways.” Work began in late April 2020, with a contract completion date MoDOT photo of Sept. 30, 2021. CEG
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 85
Page 86 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
®
ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC ....................................................14
KIRBY-SMITH MACHINERY INC..............................................................15
ALLIED CONSTRUCTION PRODUCTS ..................................................33
KLEEMANN ..............................................................................................43
ALTA EQUIPMENT COMPANY ................................................................88
KOBELCO CONSTRUCTION MACHINERY ......................................66,67
AMERICAN STATE EQUIPMENT ..............................................................7
KOMATSU AMERICA CORP ..............................................................46,47
AMULET ..............................................................................................60,62
KPI-JCI ......................................................................................................36
ASCENDUM MACHINERY INC ................................................................11
KUBOTA EXCAVATOR..............................................................................56
BANDIT INDUSTRIES INC ..................................................................34,35
LABOUNTY MANUFACTURING INC ......................................................62
BANE-WELKER ........................................................................................24
MAGELLAN CONSTRUCTION ................................................................51
BARGAINS................................................................................................79
MANITOWOC CRANE GROUP................................................................87
BLUE RIDGE TRACTOR ..........................................................................26
MAVERICK ENVIRONMENTAL ................................................................32
BOBCAT ENTERPRISES ........................................................................16
MCCANN INDUSTRIES INC ......................................................................6
BOMAG AMERICAS INC ..........................................................................23
METSO OUTOTEC ..................................................................................31
BROOKS TRACTOR ................................................................................19
MID COUNTRY MACHINERY ..................................................................73
CEG SCALE MODELS ............................................................................27
MILLER BRADFORD & RISBERG ..........................................................40
CONSTRUCTION EQUIPMENT GUIDE ..................................42,64,80,85
NATIONAL ATTACHMENTS ....................................................................62
CSTK JCB ................................................................................................24
NORAM ................................................................................................54,55
CUSTOM MADE PRODUCTS ..................................................................26
PAT KELLY EQUIPMENT CO INC............................................................24
DOOSAN..............................................................................................52,53
POWERSCREEN MW DEALER GROUP ................................................37
DOOSAN PORTABLE POWER ................................................................65
RACKERS EQUIPMENT CO ....................................................................33
DUNN DEAL AUCTIONS ..........................................................................83
ROAD BUILDERS MACHINERY ..............................................................13
ERB EQUIPMENT COMPANY....................................................................9
ROLAND MACHINERY INC........................................................................5
ESCO CORP ............................................................................................61
SANY AMERICA INC ................................................................................50
FABICK CAT................................................................................................2
SENNEBOGEN ........................................................................................39
FAE USA INC ............................................................................................38
STAR EQUIPMENT LTD ............................................................................6
FARM-RITE EQUIPMENT INC ................................................................10
SUMMIT SUPPLY LLC..............................................................................50
FELLING TRAILERS............................................................................70,71
TERAN INDUSTRIES INC ........................................................................63
FINKBINER EQUIPMENT CO ....................................................................7
TEREX FUCHS ........................................................................................41
FLANGE LOCK ........................................................................................20
THE VICTOR L PHILLIPS CO ..................................................................23
FOLEY EQUIPMENT CO..........................................................................17
THUNDER CREEK ..................................................................................20
GARY CARLSON EQUIPMENT ..............................................................18
TOWMASTER INC. ..................................................................................77
HITACHI CONSTRUCTION MACHINERY ..............................................57
TRI-STATE TRAILER SALES ..................................................................74
HULL'S 151 IMPLEMENT INC..................................................................21 HYUNDAI CONSTRUCTION EQUIPMENT ........................................44,45
OHIO STATE SUPPLEMENT
ILLINOIS TRUCK & EQUIPMENT ..............................................................3
COLUMBUS EQUIPMENT CO ................................................................................8
IMPACT ROLLER TECHNOLOGY INC ......................................................6
COMPANY WRENCH ..............................................................................................5
IRAY AUCTIONS INC................................................................................81
EQUIPMENT CORP OF AMERICA ........................................................................6
JEFF BELZER ..........................................................................................75
GORILLA HAMMERS ..............................................................................................1
JET TRAILERS ........................................................................................72
JCB OF OHIO ..........................................................................................................2
JJ SCHECKEL CORP ..............................................................................25
SOUTHEASTERN EQUIPMENT CO ......................................................................3
JOHN DEERE ..........................................................................................49
THE MCLEAN CO....................................................................................................7
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 6, 2021 • Page 87
REACCH NEW W
HE EIGH T TS IN PRRODUCTTIVI Manitowoc crawler c cranes are built to unsurpassed productivity and value on challenging jobsites. j Manitowoc delivers: d > Cranes ranging from 73 t ((80 USt) U ) to 23 > Capacity-enhancing VPC-MAX X® techno attachmen nts > Optional lo ong-reach booms, fixed jibs, extended u upper boom points > Optional 3..5 m wide boom inser erts for M
man nitowoc.com woc.com
Kirby-Smith Machinery Inc. www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550
6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300
Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net
Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757
Page 88 • February 6, 2021 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
::: $/7$ 7$(48,30(17 &20