Midwest 1 January 14, 2017 by Construction Equipment Guide

Published Nationally

$3.00

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

Inside

Midwest Edition

www.constructionequipmentguide.com

January 14, 2017 • Vol. XX • No. 1 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

80-Year-Old Minn. Highway Bridge Comes Down By Dick Rohland CEG CORRESPONDENT

General Crane Rental Takes Delivery of Grove Crane…12

Bramco Launches ‘The Rebuild Center’…14

For years, motorists driving below the long lived 80-year-old TH 36 bridge crossing over Lexington Avenue in Roseville, Minn., have seen the scaling of concrete from the shallow arch above them. Despite its rugged appearance, the arch and its solid concrete façade continued to hold onto its strength and grace. Bridge inspections over the years, though, by Minnesota Department of Transportation (MnDOT) inspectors showed that while it was still safe to carry the 85,000 ADT, it eventually would need to be replaced. MnDOT constructed the original bridge over Lexington Avenue in 1937 and earned a good return on its investment as traffic volumes grew over the years. Yet, along with its low structural rating and obvious aesthetic blemishes, maintenance costs were piling up, its geometrics were out dated and the arch construction limited bridge clearances below. see BRIDGE page 62

MnDOT awarded the $13 million contract to Ames Construction, based out of Burnsville, Minn.

Hitachi Excavators Work on Green Bay, Wis., Job…24

Table of Contents................ 4 Attachment & Parts Section ...................................... 35-38 Recycling Section........ 49-63 Truck & Trailer Section........ ...................................... 75-81 Business Calendar............ 82 Auction Section............ 86-89 Advertisers Index.............. 89

Industry Spending Project to Alleviate Reaches 10-Year High Congestion in Missouri

By Martin Crutsinger

AP ECONOMICS WRITER

WASHINGTON (AP) U.S. builders boosted spending on construction projects for a second straight month in November, pushing activity to the highest level in more than a decade. Construction spending rose 0.9 percent in November after a 0.6 percent increase in October, the Commerce Department reported Jan. 3. The increase reflected solid gains in home construction, nonresidential building and government construction activity.

The gains in all three categories pushed total construction to a seasonally adjusted annual rate of $1.18 trillion, the highest point since April 2006 when a housing boom fueled building. Economists believe construction will continue to show gains in 2017, reflecting a strong job market with unemployment at the lowest point in nine years. Financial markets sent stock prices to record highs following the election of Donald Trump, reflecting in part enthusiasm over his vows to increase spending on see CONSTRUCTION page 18

BRANSON, Mo. (AP) The first phase of a makeover of a 5-mi. (8 km) stretch of highway in Branson could be finished by Memorial Day. The Joplin Globe reported the construction aims to alleviate traffic congestion along West Highway 76 by creating a wider, continuous pedestrian walkway in the area, which includes Branson’s entertainment district. The construction is part of Project Branson, a coalition representing more than 20 area businesses. The group’s goal is to cre-

ate a walkable, unbroken chain of attractions, restaurants, theaters and retail shops. The revitalization is expected to cost $80 million, funded through a partnership with the city and by business owners along the corridor. It could take eight years to complete. City officials said the revitalization is forecast to increase sales by $1.4 billion over the next 20 years. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 2 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2012 CAT MD5075 $386,000 S/N 2U33X84 - 1786 hrs

2012 CAT 316E $150,000 S/N DZW00702 - 1901 hrs

2014 CAT 311F $139,500 S/N KCW00135 - 273 hrs

2006 CAT 345C $82,500 S/N PJW01098 - 10,347 hrs

2015 CAT 972M $225,000 S/N A8P00532 - 6459 hrs

2011 CAT 930H $102,000 S/N DHC02178 - 2406 hrs

1999 CAT 966G $59,500 S/N 3SW00391 - 31,725 hrs

2008 CAT 980H $160,000 S/N JMS03236 - 13,343 hrs

2008 CAT D5K $65,000 S/N WWW00540 - 4330 hrs

2012 CAT D4K $90,500 S/N KRR00138 - 1415 hrs

1987 CAT D7H $59,500 S/N 79Z01633 - 16,582 hrs

1991 CAT D7H $67,000 S/N 79Z04242 - 10,962 hrs

2012 CAT 289C $53,500 S/N RTD01707 - 868 hrs

2012 CAT 259B3 $41,000 S/N YYZ04184 - 1229 hrs

2008 CAT 272C $26,500 S/N RED00965 - 4847 hrs

2011 CAT 289C $34,000 S/N JMP02135 - 2,236 hrs

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ January 14, 2017 â€¢ Page 3

2008 Cat 815 5F Series II Padfoot..$265,000

2003 Cat 815F Padfoot ........... $209,500

2006 Manitou MT 6642T ............. $34,500

$ & &DW & +3 GLHVHO Â´ SDGIRRW GUXPV ZLWK FOHDQHUV Â¶ DQJOH WLOW K\GUDXOLF OHYHOLQJ EODGH VSHHG WUDQVPLVVLRQ OEV KUV

&DE ZLWK $ & Â´ SDGIRRW GUXPV ZLWK FOHDQHUV &DW +3 GLHVHO Â¶ K\GUDXOLF OHYHOLQJ EODGH OEV KUV

+3 GLHVHO :' FUDE VWHHU OE FDSDFLW\ Â¶ UHDFK Â´[ Â´ FDUULDJH 7* IRDP Â¿OOHG WLUHV OEV KUV

2005 Ingers soll Rand SD70DF Padfoot ..... $34,500 Â´ YLEUDWRU\ SDGIRRW FRPSDFWRU

2009 Vo olvo SD70 Smooth ....... .. $42,500

2011 Mauldin MG G622 ............... $59,500

&XPPLQV / +3 GLHVHO Â´ K\GUDXOLF OHYHOLQJ EODGH WLUHV OEV KUV

Â´ 9LEUDWRU\ VPRRWK GUXP FRPSDFWRU FDQRS\ .XERWD9 +3 GLHVHO WLUHV OEV KUV

&DE ZLWK $ & 'HXW] 7&' +3 GLHVHO Â¶ PROG ERDUG K\GURVWDW WUDQVPLVVLRQ :' [ WLUHV OEV KUV

2012 Kobelco SK140SR LC .... $84,500

2012 Kobelc co 485LC-9 .......... $224,500

2012 Kobelco SK170-8E ......... .. $79,500

2012 Kobelco SK210-8E K210-8E ......... $98,500

$ & +3 7LHU GLHVHO ,1'5 Â´ SDGV Â¶ Â´ VWLFN Â¶ Â´ GLJ GHSWK -5% K\GU FRXSOHU DGGLWLRQDO FRXQWHUZ ZHLJKW OEV SDWWWWHUQ FRQWURO DX[ K\GU KUV .2%

$ & +3 7LHU GLHVHO Â´ SDGV Â¶ Â´ VWLFN Â¶ Â´ GLJ GHSWK ZD\ DX[LOLDU\ K\GUDXOLFV SDWWHUQ FKDQJHU UHDU YLHZ FDPHUD OEV KUV

$ & +3 7LHU GLHVHO Â´ SDGV Â¶ Â´ VWLFN Â¶ Â´ GLJ GHSWK OEV K\GUDXOLF FRXSOHU SDWWHUQ FRQWURO DX[LOLDU\ K\GUDXOLFV KUV .2%

$ & )37 ) *( ( +3 7LHU GLHVHO Â´ SDGV Â¶ Â´ VWLFN Â¶ GLJ GHSWK OEV DX[ K\GUDXOLFV H[WUD K\GUDXOLF URW RWDWLRQ YDOYH SDWW DWWHUQ FRQWURO KUV .2%

2006 JLG 660SJ Aerial Lift ... $32,500 &DW & +3 GLHVHO Â¶ SODWIRUP KHLJKW :' ZKHHO VWHHU Â¶ EDVNHW [ WLUHV JUDGDELOLW\ OEV KUV 67

2013 Cat CT600S S Semi .......... $97,500 2016 Allied Rammer 777 7 ....... $10,500

2016 Allied Rammer 1650 ...... $28,850

OEV HQHUJ\ FODVV WR Â¿W .REHOFR 6. ESP *30 FDUULHU FODVV OEV 3ULFH GRHV QRW LQFOXGH GHDG SLQV VKLSSLQJ FRVWV $&3

OEV HQHUJ\ FODVV WR Â¿W .REHOFR 6. RU 6. ESP JSP FDUULHU FODVV 5DP 'DWD 0RQLWRU OEV 3ULFH GRHV QRW LQFOXGH 5DP /XEH 6\VWHP GHDG SLQV RU VKLSSLQJ FRVWV $&3

$ & &DW &7 +3 7LHU L GLHVHO )XOOHU (DWRQ VSG WUDQV *9: IUQW UHDUV Â´ ZKHHO EDVH 5 WLUHV OLYH UROOLQJ WDLO %UDQGRQ K\GU +3 7LHU GLHVHO WRQ FDS \GV $OOLVRQ +' WUDQV :' KHDWHG ER[ UHDU YLHZ ZLQFK DGMXVWDEOH WK ZKHHO SODWH HQJLQH EUDNH DLU ULGH FDPHUD ULJ VDYHU KHDGDFKH UDFN DXWR OXEH 0DJQD VXVS DLU ULGH FDE VHDW SZU ZLQGRZV ORFNV KHDWHG 5 UDGLDOV OEV KUV PLUURUV FUXLVH FQWUO SLQWOH KLWFK 0LOHV

2013 Terex e TA400 A Articulated . $240,000

sales@iltruck.com â€¢ renta al@iltruck.com â€¢ 815-941-1900 Illinois Truck & Equipment 320 0 Briscoe Drive, Morris Illinois 6045 50

www.iltrruck.com

Page 4 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES 12 GENERAL CRANE RENTAL TAKES DELIVERY OF GROVE GMK5275 For Dan Manos, owner of General Crane Rental LLC, relationships and

growth are the two driving factors behind his approach to operating

his business.

30 CHANGES TO COME FOR MISSOURI 14 BRAMCO LAUNCHES ‘THE REBUILD CENTER’ DIVISION IN KY.

RECYCLING SECTION

CONSTRUCTION INDUSTRY IN 2017 After a series of surprises in 2016, we should expect changes on several

Bramco recently held an open house event at the company’s newly launched

fronts pertinent to our industry — legislative issues, labor relations and

The Rebuild Center division, located at Bramco’s headquarters location in

infrastructure funding as well as the economy overall.

49 SENNEBOGEN ACTS AS CORNERSTONE OF RECYCLING EFFORT

Louisville, Kentucky.

50 ATLAS COPCO’S BUCKET CRUSHER OFFERS

34 U.S. ARMY PLACES $142M NEW YEAR 18 LIUGONG PRESIDENT NOMINATED

GREATER VERSATILITY

ORDER FOR JCB MACHINES

FOR 2016 TOP MANAGER AWARD

JCB has started 2017 by winning one of the biggest single orders in its

Yu Chuanfen, president of LiuGong Machinery Co. Ltd. was nominated for the

71-year history — a $142-million deal to supply the United States Army with a

2016 China Top Quality Manager by China Quality Association and All-China

massive fleet of machines.

50 MB CRUSHER AMERICA TO PRESENT CRUSHING, SCREENING DEMOS

52 FUCHS MHL390 F DELIVERS WITH LONG

Federation of Trade Unions.

70 COMMODITY PRICES CONTINUE TO GAIN: 20 MCCANN INDUSTRIES ADDS CARLSON PAVING PRODUCTS EQUIPMENT LINE McCann Industries Inc. announced that the company now offers Carlson

REACH CAPACITY

FERROUS METALS DRIVE HIGHER INDEX The IHS Materials Price Index (MPI) rose for a sixth consecutive week,

58 CEMCO’S TURBO 128 V-TWIN VSI CRUSHER FEATURES LARGE CAPACITY, DURABILITY

increasing 1.4 percent to hit a fresh 18-month high.

Paving Products road building equipment at all of its locations.

70 CONSTRUCTION COSTS RISE TO END 2016 24 HITACHI EXCAVATORS ‘STAR PLAYERS’ ON GREEN BAY, WIS., PROJECT

Construction costs rose for the second straight month, according to IHS

In Green Bay, Wis., Hitachi excavators have proved to be game changers on

Markit and the Procurement Executives Group (PEG).

the Titletown District development, a destination area to be created on approximately 34 acres of land immediately west of Lambeau Field.

88 RITCHIE BROS. AUCTIONEERS COMPLETES

28 CATERPILLAR ANNOUNCES APPOINTMENTS

Ritchie Bros. Auctioneers Incorporated sold approximately $4.33 billion of

Following the previous announcement of changes and appointments in

equipment through 356 unreserved auctions and its online equipment

Caterpillar’s executive office, and due to the retirement of two long-serving

marketplace during 2016. This is a new annual record for the company, and

vice presidents, Caterpillar Inc. announced its board of directors has

represents a 2 percent increase in gross auction proceeds (GAP) compared

appointed three new vice presidents.

to 2015.

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Mobile

Facebook

Twitter

36 VIRNIG MANUFACTURING Pipe Pallet Fork Grapple 36 DIGGA Cement Mixer 75 KENWORTH T680 Advantage Package

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

82 BUSINESS CALENDAR 82 CLASSIFIEDS 86 COMING AUCTIONS

EQUIPMENT

FINAL AUCTIONS OF 2016

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

XX HEADLINE... DEPARTMENTS

ON HIGH NOTE

YouTube

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

National Sales Manager 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Toll Free Fax e-mail

773/769-4090 800/632-0233 773/769-4280 jmckeon@cegltd.com

Toll Free Fax e-mail

440/243-9690 800/810-7640 440/243-9691 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2017, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Toll Free Fax e-mail

952/353-1770 866/413-4265 952/353-2750 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 5

Quality Used Equipment...with support to back it up

Komatsu HM400-2, ‘11, 7,670 hrs........ $199,000

Komatsu XT430-2, ‘14, 6,365 hrs.......... $265,000

DOZERS

MILLING

TRAILERS

Komatsu D61PX-15EO, ‘08, 4,180 hrs.............................. $105,000 Komatsu D61PX-23, ‘13, 4,090 hrs.................................. $146,000 Komatsu D61PX-23, ’14, 1,838 hrs.................................. $179,000 Komatsu D61PX-23, ’14, 2,367 hrs.................................. $179,000 Komatsu D65EX-16, ’11, 2,234 hrs....................................$165,000 Komatsu D65PX-15EO, ’06, 11,070 hrs.............................. $59,000 Komatsu D65EX-15EO, ’07, 3,934 hrs.............................. $149,500 Komatsu D65WX-15EO, ’07, 3,959 hrs.............................. $157,000 Komatsu D275AX-5, ’03, 23,015 hrs.................................. $99,500

Wirtgen W60, ’08, 628 hrs................................................ $144,900 Wirtgen W2000, ‘08, 7,798 hrs..........................................$199,999 Wirtgen W2100, ’04, 8,538 hrs..........................................$209,500

Felling FT20LP, ‘03.............................................................. $12,000

EXCAVATORS

Case TV380, ‘11, 1,945 hrs..................................................$45,000 New Holland L230, ’14, 295 hrs.......................................... $49,399

FORESTRY Hydro-Ax 411 EX, ’98, 7,547 hrs..........................................$35,000 Komatsu 911.4, ‘09, 7,544 hrs....................................................Call Komatsu 911.4, ’11, 6,132 hrs....................................................Call Komatsu 911.4, ’10, 5,225 hrs....................................................Call Komatsu 911.5, ‘13, 6,160 hrs....................................................Call Komatsu 931.1, ‘14, 4,000 hrs.......................................... $425,000 Komatsu XT430-2, ‘14, 6,365 hrs...................................... $265,000 Ponsse Ergo Harvester, ‘05, 13,239 hrs.................................... Call Ponsse HS10 Cobra, ’99, 20,995 hrs.................................. $64,900 Ponsse Buffalo, ’02, 22,200 hrs........................................ $119,000 Ponsse Ergo HS16, ’99, 17,676 hrs.................................... $79,900 Valmet 911.1, ‘02, 22,196 hrs.................................................... Call Valmet 941.1, ‘08, 11,309 hrs.......................................... $225,000

MATERIAL HANDLERS Cat 365CL-MH, ‘08, 10,428 hrs........................................ $137,500 Komatsu P400LC-8MH, ’08, 6,095 hrs.............................. $219,500 Sennebogen 825M D, ’13, 17 hrs.............................................. Call

OFF HIGHWAY TRUCKS Komatsu HM400-2, ‘11, 7,475 hrs.................................... $199,000 Komatsu HM400-2, ‘11, 7,670 hrs.................................... $199,000 Komatsu HD465-7, ’06, 18,843..........................................$219,500 Komatsu HD605-7EO, ’08, 20,247 hrs.............................. $130,000

WATER TRUCKS Komatsu HM300-2 6,500 Gal, ’12, 7,764 hrs....................$255,000

Komatsu PC220LC-8, ‘07, 7,739 hrs...... $79,000

Atlas Copco MB1200 Hydraulic Hammer, ’05, Rebuilt & Painted...... ..............................................................................................$21,799 Case CX135SR, ‘11, 2,350 hrs............................................ $88,000 Cat 330CL, ’02, 12,032 hrs.................................................. $59,500 Cat M318, ‘96, 6,440 hrs.................................................... $39,500 Cat 325CL, ’02, 6,761 hrs.................................................... $50,000 Cat 330CL, ‘04, 10,970 hrs.................................................. $55,000 Deere 85G, ’15, 553 hrs...................................................... $99,000 Deere 160C LC, ’06, 7,173 hrs............................................ $55,000 Deere 200C LC, ’04, 8,988 hrs............................................ $60,000 Deere 240D LC, ‘10, 6,338 hrs............................................ $80,000 Deere 350DLC, ’07, 5,837 hrs............................................ $83,000 Komatsu PC138USLC-8, ’13, 2,432 hrs............................ $115,000 Komatsu PC138USLC-10, ’14, 1,529 hrs.......................... $120,000 Komatsu PC138USLC-10, ’14, 2,794 hrs.......................... $115,000 Komatsu PC160LC-7, ‘04, 8,215 hrs....................................$49,000 Komatsu PC200LC-5, ’93, 10,789 hrs..................................$25,000 Komatsu PC200LC-8, ‘12, 4,414 hrs..................................$110,000 Komatsu PC210LC-10, ’13, 1,862 hrs................................$145,000 Komatsu PC210LC-10, ’14, 1,307 hrs................................$178,000 Komatsu PC220LC-6, ‘98, 19,095 hrs..................................$37,100 Komatsu PC220LC-7, ‘04, 12,969 hrs..................................$48,000 Komatsu PC220LC-7, ‘02, 9,906 hrs....................................$80,000 Komatsu PC220LC-8, ’06, 9,204 hrs....................................$83,000 Komatsu PC220LC-8, ‘07, 7,739 hrs....................................$79,000 Komatsu PC228USLC-8, ’12, 3,449 hrs............................ $155,000 Komatsu PC228USLC-10, ’14, 923 hrs.............................. $186,599 Komatsu PC300LC-7, ’02, 6,764 hrs....................................$90,000 Komatsu PC300LC-7, ’05, 9,765 hrs....................................$91,000 Komatsu PC300LC-7 w/Shear, ‘06, 7,463 hrs.................. $265,000 Komatsu PC300LC-7EO, ’06, 6,449 hrs.............................. $85,000 Komatsu PC300LC-7EO, ’06, 7,736 hrs............................ $110,000 Komatsu PC300LC-8, ‘09, 9,584 hrs..................................$119,000 Komatsu PC360LC-10, ’15, 838 hrs.................................. $250,000 Komatsu PC360LC-10, ’15, 1,018 hrs................................$250,000 Komatsu PC360LC-10, ’13, 2,510 hrs................................$179,000 Komatsu PC360LC-10, ’12, 1,148 hrs................................$264,500 Komatsu PC390LC-10, ‘15, 1,545 hrs................................$275,000 Komatsu PC400LC-7, ’06, 10,544 hrs..................................$70,000 Komatsu PC400LC-7EO, ’07, 10,949 hrs............................ $84,000 Komatsu PC400LC-8, ‘08, 7,118 hrs..................................$127,000 Komatsu PC400LC-8, ‘09, 6,677 hrs..................................$140,000 Komatsu PC490LC-10, ‘13, 2,977 hrs................................$268,999 Komatsu PC490LC-10, ‘12, 3,273 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 4,306 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 5,371 hrs................................$239,000 Komatsu PC600LC-7, ’05, 10,328 hrs................................$199,500 Komatsu PC600LC-7, ’06, 11,372 hrs................................$139,000 Komatsu PC600LC-8, ’06, 10,478 hrs................................$199,500 Link Belt 250 X3 LF, ‘12, 3,437 hrs.................................. $120,000 Volvo EC220DL, ’13, 2,151 hrs.......................................... $111,500 Volvo EC380DL, ‘11, 4,017 hrs.......................................... $132,500

SKID STEERS COMPACTION Bomag BC61RB, ’00, 15,862 hrs........................................ $49,900 Bomag BC1172RB, ’05, 15,531 hrs.................................... $89,900 Hamm HD12VV, ’12, 4,531 hrs............................................ $15,000 Hamm HD120HV, ‘03, 2,690 hrs.......................................... $32,999 Hamm HD120HV, ‘04, 3,211 hrs.......................................... $30,000 Stone WP4100 Double Drum, ‘09, 1,018 hrs...................... $14,599 Volvo DD15, ‘14, 631 hrs.................................................... $23,000

PAVING IR 550P, ‘91, 2,010 hrs.......................................................... $9,000 Leeboy 8500, ‘03, 3,521 hrs................................................ $25,000 Leeboy 8500T, ’06, 5,859 hrs.............................................. $25,000 Vogele 5203-2, ’08, 4,307 hrs............................................ $99,000 Vogele 880WB, ’05, 5,862 hrs............................................ $26,699

WHEEL LOADERS Deere 624K, ’13, 948 hrs...................................................... $P.O.R. Deere 624K, ’13, 905 hrs...................................................... $P.O.R. Kawasaki 95ZV-2, ‘08, 16,219 hrs...................................... $49,000 Komatsu WA200PZ-6, ‘14, 957 hrs....................................$115,000 Komatsu WA380, ‘95, 7,833 hrs.......................................... $35,000 Komatsu WA380-6, ’11, 2,888 hrs.................................... $150,000 Komatsu WA380-6, ’12, 2,571 hrs.................................... $165,000 Komatsu WA380-7, ‘12, 3,025 hrs.................................... $147,500 Komatsu WA400-5L, ’05, 10,968 hrs.................................. $72,999 Komatsu WA430-6, ‘07, 7,555 hrs...................................... $99,000 Komatsu WA430-6, ‘11, 4,377 hrs.................................... $167,500 Komatsu WA500-6, ‘09, 9,628 hrs.................................... $207,299 Komatsu WA500-6, ’09, 19,098 hrs.................................. $125,000 Komatsu WA500-6, ’09, 8,621 hrs.................................... $211,399 Terex TL300-2, ’08, 2,441 hrs..............................................$69,500

Komatsu WA430-6, ‘07, 7,555 hrs.......... $99,000

Financing Available for Qualified Buyers

16 Roland Branch Locations in IL, IN, MI, MO, and WI

Call AJ Perisho (217) 789-7711 • Email: aperisho@rolandmachinery.com

V I S I T

R O L A N D M A C H I N E R Y . C O M

Page 6 â€˘ January 14, 2017 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke â€˘ (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ÂŽ

View our complete Used & â€œLike Newâ€? inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2007 Case SV208, s/n DDD002010, 1650 Hours, ROPS, 66â€? Wide Smooth Drum Roller.. ............................................................ $47,700

2012 Case CX160C, s/n DAC160K6NCSAF1112, 3100 Hours, Cab w/AC, 9â€™11â€? Arm, 24â€? Shoes, Single Acting Hyds, Coupler, Warranty Through 03/17...... $113,850

2012 Case CX350C, s/n DAC350K6NCSAP1212, 2650 Hours, Cab w/AC, 10â€™8â€? Arm, 32â€? Shoes, Single Acting Hyds, Coupler, Warranty through 07/17.................................................. $189,750

2012 Case CX210C, s/n DAC210K6NCSAH1134, 2260 Hours, Cab w/AC, 9â€™8â€? Arm, 32â€? Shoes, Double Acting Hyds, Coupler, Warranty through 03/17...... $126,900

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 2007 Case SV208PD, s/n DDD002057, 1000 2006 Case 580SM, s/n N6C412119, 4600 Hours, ROPS, 66â€? Padfoot Roller, Blade$47,700 Hours, Cab w/ Heat and AC, 4 WD, Ext-hoe, Ride Control, Two Lever, 82â€? Bucket, 12â€? and 24â€? Bkt..................................................$39,550

1999 Case 580L, s/n JJG0247133, 5550 Hours, Cab w/Heat, Two Lever, Ext-Hoe, 4WD, 18â€? Backhoe Bkt, 82â€? front Bkt............ $23,500

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2012 Case DV202, s/n DDDDV202NCTF2016, 1175 Hours, ROPS, Right side Drive Lever, 47" Drum.................................................... $25,700

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Indiana Schererville* 219-865-6545 *Case authorized dealer location

Custom Made Products Co. Humboldt, IA Lease To Own

(800) 760-7871 Call Anytime

www.gncmp.com 100+ Scrapers on Hand at 16 Locations FOR SALE OR FOR RENT

Locations: Humboldt, Bayard, De Soto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton, IA, Wayne, NE & La Plata, MO

2013 Mustang 2013 M t 2076 skid 2076 kid with ith 22,50 500# Cap, C Cab, C b Heat, Joystick Ctrls, 2Speeed, & PowerTach. KUV ,' ÂŤ ÂŤ

We Will Not Be Undersold!

elivery! Free Dst areas *to mo

18 yd Ashland I-180 TS2s (Used) Call

*HKO '/ + WHOHKDQGOHU Z /LIW &DSDFLW\ Âś %RRP % 2SHQ 5236 'XDO )XQFWLRQ -R\\VWLFN )RDP )LOOHG 7LUHVV /LJKWV $X[ +\G 2XWUULJJHUV '\QD7DFK

2005 Mustang 2054 skid loaader with 1,650# Cap, 46hp, Open ROPS, T-Barr Ctrls, & Aux Hyd.

6XVSHQVLRQ 6HDW KUV ,' 63(&,$/ 35,&(ÂŤ

KUV ,' % ÂŤ

GRADERS

HOLCOMB

Artâ€™s-Way Graders, (New & Used)................................................ Call Johnson Graders (New & Used)....................................................Call 8â€™-16â€™ With & Without Rear Steer

8 yd to 18 yd, (Dolly Wheel or Direct Mount - New & Used)........ Call

ASHLAND 18yd Ashland I-180 TS2s, (Used)................................................ Call 17 1/2yd Ashland I-175 XL2, (New & Used)................................ Call 15 1/2yd Ashland I-155 TS2s, (New & Used).............................. Call 15 1/2yd Ashland I-155 XL2s, (New & Used).............................. Call 13yd Ashland I-130 TS2s, (Used)................................................ Call Ashland I-130 XL2, (Used)............................................................Call Ashland I-140 TS2, (New)............................................................ Call 14yd Ashland I-140 XL2s, (New & Used).................................... Call 11yd Ashland I-110 TS2s, (Used)................................................ Call 11yd Ashland I-110 XL2s, (Used)................................................ Call 9 1/2yd Ashland I-950s, (New & Used)........................................ Call Ashland Groundhog GH2500, (New & Used)................................ Call

2012 Takeuchi TL10 track loader with 2,400## Cap, 92hp, Cab, A/C, Pattern S Select, AuxHyd, & Qu QuickTach.

2011 Takeuchi TL250 track loader with 2,624# Cap, Cab, Heat, Aux Hyd, QuickTach.

KUV ,' % ÂŤ

KUV ,' $ÂŤ

22006 Ford F550 VHUYLFH WUXFN Z Âś 6HUYLFH %RG\ Âś Electric Crane, 19,000## GVWR, & Automatic A Transmission. $SSUR[ PLOHV ,' $ ÂŤ

- - _ 'HV 0RLQHV Ä &HGDU 5DSLGV Ä :DWHUORR Ä $PHV _ ZZZ VWDUHTXLS FRP

14 yd Ashland I-140 XL2s (New & Used) Call

GARFIELD 12yd Garfield Model 1150s, (Used)..............................................Call 13yd Garfield 1350s, (New & Used)............................................ Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

BIG DOG 8 yd Big Dogs, (New & Used)...................................................... Call 6 1/2 yd Big Dogs, (New & Used)................................................ Call 5 yd Big Dogs, (New & Used)...................................................... Call 12â€™ Feedlot Box Scrapers..............................................................Call 10â€™ Feedlot Box Scrapers..............................................................Call 12â€™ Box Scrapers.......................................................................... Call 10â€™ Box Scrapers.......................................................................... Call 8â€™ Box Scrapers............................................................................ Call

IRONWOLF 8-14 yd.......................................................................................... Call

LEON 10-13 1/2 yd.................................................................................. Call

ROWSE 7 yd Rowse Model 7002 & 7004.................................................. Call 5 yd Rowse Model 7002 & 7004.................................................. Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used)............................ Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 7

PAVERS / ROAD WIDENERS BOMAG CR662RM - ‘15, 230 Hrs, Material Transfer w/Hopper, #C000763.................... $435,950 LEEBOY 8500 HD - ‘00, 2915 Hrs, Hatz 3 Cylinder, Diesel Engine w/8-15’ Legend Propane Screed Electronic Grade Controls, Ready to Work, #C000969..........................................$31,000 MAULDIN 690G - ‘16, 8’-13’ Wide (Gold Key Specs), #C001058, 50 Hrs...................... *$69,950 MAULDIN 1550D - ‘16, 8’-14’ Wide (Gold Key Specs), #C001057, 55 Hrs.................... *$99,501 MAULDIN 1750C - ‘16, 8’-16’ Wide (Gold Key Specs), #C001002, 70 Hrs.................. *$143,975 MIDLAND SPD6 - ‘15, 452 Hrs, Right and Left Discharge 1-6 ft, Hyd Strike Off, Hyd Pushrollers, Washdown System, #C000820........................................................................................ $99,950 MIDLAND SPR6 - ‘15, 200 Hrs, Right Hand Discharge, 1-6ft, # C000914...................... $101,950 MIDLAND SPD8 - ‘16, 92 Hrs, Dual Discharge to 8 ft, #C001018.................................. $165,950 MIDLAND SP10 - ‘03, 3682 Hrs, Dual Discharge, Deere Powered, ***3-1ft Ext, 4-2ft Ext, 2-3-4ft Hyd Ext, #C000926.............................................................................................. $69,950 P.O.R. items may be on rent causing pricing and hours to vary.

MILLING MACHINES BOMAG BM600 - ‘16, 83 Hrs, 24” Drum, Load Out Conveyor...................................... $216,950 BOMAG BM1200/35 - ’15, 450 Hrs w/Tracks, 3ft and 4ft Drum, Front Conveyor, #C000846........ ........................................................................................................................................$369,950 BOMAG BM1300/30 - ‘16, 308 Hrs, 51”, 4 Track Milling Machine, #C000993.............. $324,950 CATERPILLAR 950G - ‘03, Transfer Station Machines, Solid Tires.. 2 From $31,950 and $39,950

CRUSHING AND SCREENING KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’................................................................ $115,950 NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More...................... P.O.R.

Manitowoc 10000A-1 (’13) 100 Ton, 190’ Boom, 60’ Jib, 75 Ton Block…P.O.R.

Grove TMS900E - (’05) 90 Ton, 142’ Boom, 56’ Jib, Aux, Hoist, Boom Dolly….P.O.R.

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for:

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock.

ROLLERS SAKAI R2H2 - ’16, 84”, 3 Wheel Static, #C000957, 312 Hrs.......................................... *$72,000 SAKAI R2H2 - ’16, 84”, 3 Wheel Static, #C000958, 230 Hrs.......................................... *$75,000 SAKAI R2H2 - ’16, 84”, 3 Wheel Static, #C000959, 483 Hrs.......................................... *$76,500 SAKAI R2H2 - ’16, 84”, 3 Wheel Static, #C000960, 267 Hrs.......................................... *$80,000 SAKAI R2H2 - ’16, 84”, 3 Wheel Static, #C001040, 179 Hrs.......................................... *$88,000 SAKAI R2H4 - ‘16, 84”, 3 Wheel Static, remaining warranty and eptw.............. *CALL FOR PRICE SAKAI SW652 - ‘15, 386 Hrs, 58” Double Drum, Vibratory Rollers, #C000744..............*$70,468 SAKAI SW502 - ‘13, 964 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212 ........................................................................................................................................*$27,950 SAKAI SW300 - ‘13, 149 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156............ ........................................................................................................................................*$29,950 SAKAI SW320 - ‘16, 47” Double Drum Vibratory Roller, #C000963, 91 Hrs.................. *$37,950 SAKAI SW770HF - ‘16, 67” Double Drum Vibratory Roller w/Exact Compaction Meter, #C000966, 575 Hrs........................................................................................................ *$92,950 SAKAI SW880 - ‘15, 79” Double Drum Vibratory Roller w/Exact Compaction Meter, #C000729, 1209 Hrs........................................................................................................................ *$85,505 SAKAI SW880 - ‘16, 79” Double Drum Vibratory Roller, #C000968, 478 Hrs.............. *$119,950 SAKAI GW750-2 - ‘14, 445 Hrs, Vibratory Pnuematic Tire Roller, #C000533.............. *$112,200 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282.................... $25,000 GRADALL XL4100 II - ‘05, 16664 Hrs, Workable, #C1052................................................ $35,950

Contact Tim or Marty in Illinois

1-800-307-0221

treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

AGGREGATE EQUIPMENT JCI K-400 PORTABLE CONE CRUSHER, 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. Leveling Jacks, Tri-Axle Running Gear, 2006..............................................................$345,000 JCI 6X20TD PORTABLE SCREEN PLANT, Underscreen Discharge Conveyor, Two (2) Cross Conveyors, Electric Control Panel, 2012............................................................................ $162,000 CEDARAPIDS 4136 PORTABLE TWIN ROLL PLANT, Allis 5’x16’ SD Screen, Cummins V-12 Power, Tandem Axle Chassis, Hydraulic Leveling............................................................................ $61,000 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year.......................................................................................... $360,000

CRANES MANITOWOC 14000, 2007, 220 Ton Crawler Crane, 292’ Boom, 70’ Jib, 48” Shoes, Self-Erecting System, Series 2 CWT............................................................................................................ P.O.R. GROVE RT880E, 2015, 80 Ton, 128’ Boom, 56’ Jib, Aux. Hoist............................................ P.O.R. GROVE GMK5225, 2013, 225 Ton Hyd AT Crane, 210’ Boom, 112’ Jib, Aux Hoist, Boom Dolly...... ................................................................................................................................................ P.O.R.

LOADERS AND EXCAVATORS: LIEBHERR A900C, 2006, Rubber Tired, Front Dozer Blade, Aux. Hydraulic Cntrls............ $147,000 LIEBHERR LR622B, 2008, Crawler Loader, 2.35 Yd Bucket, 20” Pads, ROPS Cab.......... $155,000 CAT 930G, 2007, 3 Yd Bucket, 60” Forks, Hyd QC, 20.5R25 Tires...................................... $99,500 VOLVO EC290B LC, 2002, 2.25 Yd Bucket, 32’6” Reach, 23.6” Tracks................................$58,500 Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113 Visit us at: www.amstate.com

Page 8 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . . $15,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . . $49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . . From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . . $4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 OFF ROAD HAULERS

Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . . . . $127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . . $145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . . $115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . . $147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . $87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $122,500

Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . . $10,500 very good condition . . . . . . . . . . . . . . . . . . . $159,000 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" TRUCKS & TRAILERS hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . $11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd (2) 48' Box Vans w/Liftgates, Good Condition . . CALL angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 AIR COMPRESSORS LANDSCAPING

CRAWLER TRACTORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . CALL

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, SPECIALS winches, v. good . . . . . . . . . . . . . . . . . . $175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . . $85,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . type, (4) MH lights, excellent . . . . . . . . . From $5,200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39,000 Ea. BACKHOES CRANES Case 580L Rubber Tire Loader Backhoe, 1997, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . $24,500 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Ford 455C Loader Backhoe, 1990, 36” Rear Bucket, Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom 8532 HMR, Overall in Decent Condition . . . . . $10,500 anti-two block, GM dsl, clean . . . . . . . . . . . . . $49,500 DRILLS MOTOR SCRAPERS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Cat 613C Water Wagon, 1994, 5000 gal drop tank, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 ROPS, spray heads . . . . . . . . . . . . . . . . . . . . . $49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good MISCELLANEOUS condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CALL (2) Balderson Broom Attachment for Cat IT Machines, Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice 8' wide, good condition . . . . . . . . . . . . . . . $4,000 Ea. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CALL Rivinius R600B, 1995, 10’ Wide, Mount on Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 HYDRAULIC EXCAVATORS JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . . $29,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . . . . . . . . . $10,500/OFFER Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . . CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL

ATTACHMENTS

BUCKETS PC1000, 84" Digging Bucket . . . . . . . . . . . . . . $9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $4,000 Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2015 Bobcat S595 - Call for Details

Bobcat Excavators in Stock, Call for Pricing

Bobcat Toolcats In Stock

Doosan DX140LC Excavator Available for Rent

Largest Selection in the Midwest! ®

Authorized Bobcat Dealer Bobcat 440.......................................... Starting at $4,500 Bobcat 463’s........................................ Starting at $8,000 Bobcat 542B........................................ Starting at $6,900 Bobcat 642........................................................ $7,500 Bobcat 642B...................................................... $8,500 Bobcat 743.......................................... Starting at $8,000 Bobcat 751................................ Several Starting at $9,900 Bobcat 753........................................ Starting at $10,000 Bobcat 763F, Series, Open Cab.............................. $11,500 Bobcat 773G, With Heat...................................... $15,900 Bobcat 843, Heated Cab...................................... $10,000

Bobcat 853’s...................................... Starting at $11,000 Bobcat 863, With Heat........................................ $12,900 Bobcat 863G...................................................... 14,900 Bobcat 873...................................................... $17,900 Bobcat S130, 2006, Heated Cab................................ CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ...................................................... Starting at $14,900 Bobcat S250...................................... Starting at $17,500

Compact Track Machines Bobcat T190’s.................................... Starting at $17,500 Bobcat T200...................................... Starting at $17,500 Bobcat T250, Gold................................ Starting at $24,500 Bobcat T300...................................... Starting at $25,000

2015 Bobcat T770 - Call for Details

Other Brands Gehl 4615 Skidloader, Open Canopy.......................... $8,500 Mustang 2105...................................................... CALL New Holland L175................................................ CALL John Deere 250/260 Models Available........................ CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys.................... ...................................................... Starting at $15,900 Bobcat 334.......................................................... CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341........................................ Starting at $29,990 Bobcat 442.............................. Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Authorized Bobcat Dealer

U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

incredible fuel efficiency outstanding power & productivity Volvo is with you. Optimum power, versatility and fuel efficiency comes with the name you’ve trusted for over 80 years. With unwavering reliability and dependability, Volvo ensures you get the job done day after day.

www.ascendum.com ascvolvo.com

Smart Works.

Page 12 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

General Crane Rental Takes Delivery of Grove GMK5275 For Dan Manos, owner of General Crane Bob Krenciglova (L), general manager of General Crane Rental LLC, relationships and growth are Rental LLC, and Dan Manos, owner of General Crane the two driving factors behind his approach Rental LLC, say the company’s new Grove GMK5275 has to operating his business. Manos began his opened the door for additional business. career working with his father at age 16 and credits his father and uncle for teaching him the majority of what he knows about steel erecting and crane rental. This experience also helped him develop relationships with key players in the industry long before starting his own business in 1988. Early in his career, Manos showed a mechanical aptitude and landed a job as an ironworker. He enjoyed the job, but after seeing three of his coworkers fall, he made the decision to become a member of the Operating Engineers and continue his employment with his father for the next 19 years operating and assembling cranes until it was time to move on and start his own business. Manos started out with an 18-ton crane and a 35-ton crane, operating one crane while dispatching the other. The relationship Manos developed with James Mirgliotta, a principal officer of Forest City Erectors, proved to be invaluable during the formative years of his career. Manos met Mirgliotta while working as an ironworker, and many of his initial jobs came as a result of that relationship. “When I started out, many of our jobs involved doing picks for $600 a day,” said Manos. “Compare that to a recent job, which earned $36,000 a day. We’ve come a long way.” In addition to relationships with his customers, which range from steel erectors and machinery Ashtabula, Toledo, Sandusky, Columbus, movers to carpenters and electriWooster, Mansfield and Youngstown. The cians, Manos also attributes his company also provides trucking services and company’s growth to his employheavy equipment hauling with a full fleet of ees. In 1998, he brought in his tractors, lowboys, flatbeds and service office manager, Karen Harnar, trucks. which allowed him to focus on The Grove GMK5275 is the largest crane building the business. in the fleet, and it was part of a three-crane Additionally, Bob Krenciglova, package purchased from Ohio Grove dealer, General Crane Rental’s general Cleveland Crane & Shovel. The purchase manager, who has been with the met both of his criteria in regards to relationcompany for eight years, has ships and growth. Manos has a 40-year relahelped to spur growth. The comtionship with Cleveland Crane and Shovel pany now employs approximately and after the receipt of the three cranes men20 to 25 individuals, including tioned above, Manos is currently in negotialicensed and certified operators, tions for the purchase of a Grove GMK6400, oilers and mechanics. 450-ton (408 t) all terrain crane with 420 ft. Currently, the company’s fleet (128 m) tip height. includes 30 OSHA-certified “I have known Bill Aurelius, the president cranes ranging in size from boom of Cleveland Crane and Shovel, and Andrew trucks to his recently purchased Forepaugh, vice president of sales Cleveland Grove GMK5275, 275-ton (249 t) Crane and Shovel, for years. They are all terrain crane. The company’s extremely trustworthy and reliable.” business covers Ohio and surManos also has a long-standing relationrounding states however, the majority of its work is concentrat- (L-R) are Andrew Forepaugh, Cleveland Crane & Shovel; Dan Manos, General Crane Rental ship with Grove cranes. see GROVE page 64 ed in Cleveland, Akron, Canton, LLC, and Bill Aurelius, Cleveland Crane & Shovel.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 13

> ÊÕ

> ÕÃ ÃÊÌ `>Þ `> >Þ ÞttÊ ÀÀÞ Þ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

www ww w.R .RBused.com

Celeb brating tiing g our 30th Yea Year!!

2006 KOMATSU PC78MR-6, #82564, CAB/AC, 11’2” BOOM, 8’10.5” ARM, 17.5” RUBBER TRACKS, AUX HYDS, THUMB, 2400 HRS............ ................................................................ $69,500

2014 KOMATSU PC88MR-10, #92381, CAB/AC, 11’2” BOOM, 7’ ARM, 18” SHOES, AUX HYDS, QC, 1800 HRS..........................................$89,500

2002 KOMATSU PC95R-2, #50051, CAB/HEAT, 20” TRACKS, AUX HYD, BLADE, 1900 HRS.......... ................................................................ $69,500

2012 KOMATSU PC138US LC-8, #82648, CAB, 23.5” SHOES, STEEL TRACKS, BLADE, AUX HYDS, STRICKLAND HYD THUMB, 2200 HRS...... .............................................................. $119,500

2005 KOMATSU PC160 LC-7, #82702, CAB/AC, 16’ BOOM, 8’6” ARM, 23.5” SHOES, 6500 HRS.. ................................................................ $79,500

2009 KOMATSU PC200 LC-8, #81893, CAB/AC, 2014 KOMATSU PC210 LC-10, #92117, CAB/AC, 9’7” ARM, REAR CAMERA, JRB CAMERA, JRB 31.5” TRACKS, 9’7” ARM, HYD THUMB, KOMQC, HYD THUMB, KOMTRAX, 2000 HRS$189,500 TRAX, REAR CAMERA, 900 HRS.......... $197,500

2008 KOMTRAX PC220 LC-8, #82213, CAB/AC, 31.5” TRACKS, QC, HYD THUMB, REAR CAMREA, KOMTRAX, 6400 HRS.................. $124,500

2006 KOMATSU PC228US LC-3, #82164, CAB/AC, 2013 KOMATSU PC240 LC-10, #82717, CAB/AC, JRB QC, HYD THUMB, 5300 HRS..........$139,500 19’ BOOM, 15’ ARM, 31.5” SHOES, AUX HYD, QC, 1500 HRS........................................$199,500

2006 KOMATSU PC270 LC-8LF, #82232, CAB/AC, 2014 KOMATSU PC290 LC-10, #82419, CAB/AC, 33.5” TRACKS, 60’ PIERCE LONG FRONT, KOM31.5” TRACKS, 10’ ARM, AUX HYD, REAR CAMTRAX, 5600 HRS.................................. $154,500 ERA, KOMTRAX, 2100 HRS.................. $249,500

2006 KOMATSU PC300 LC-7EO, #91808, CAB/AC, 33.5” TRACKS, 13’ ARM, AUX HYD, JRB QC, KOMTRAX, 5600 HRS.................... $169,500

2014 KOMATSU PC360 LC-10, #82391, CAB/AC, 33.5” SHOES, 10’6” ARM, REAR CAMERA, KOMTRAX, 1400 HRS.................................. $249,500

2011 KOMATSU PC308US LC-3EO, #82416, CAB/AC, QC, 33.5” SHOES, AUX HYD, KOMTRAX, 4400 HRS.................................................. $CALL

2008 KOMATSU PC400 LC-8, #91887, CAB/AC, 35.5” TRACKS, 13’ ARM, JRB QC, AUX HYD, KOMTRAX, REAR CAMERA, 8300 HRS $169,500

Page 14 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bramco Launches ‘The Rebuild Center’ Division in Ky.

Garratt Dykes, director of The Rebuild Center, oversees operations.

This Komatsu WA600-6 wheel loader is in the process of a complete teardown.

This Sennebogen 825 mobile material handler has been remanufactured and is ready to go back into service.

Bramco recently held an open house event at the company’s newly launched The Rebuild Center division, located at Bramco’s headquarters location in Louisville, Kentucky. The event was attended by both Brandeis and Power Equipment customers as well as manufacturing representatives from the company’s equipment lines and was held to showcase the operation’s capabilities. Spearheaded by Garratt Dykes, The Rebuild Center director, the division operates as a distinct business unit within Bramco and has a dedicated facility in Louisville. The facility features 18,650 sq. ft. of workspace outfitted with overhead cranes, an engine dynamometer, hydraulic test stand, press and it is fully equipped with line boring and expert welding capabilities. The company’s paint facility also is put into service for The Rebuild Center. As Dykes, who started with Brandeis as a shop foreman, explains it, for customers seeking alternatives to replacing aging machines, a rebuild — when done correctly — is an extremely cost effective and viable solution. see BRAMCO page 64

This Komatsu WA600-6 wheel loader is prepped for paint.

This remanufactured Komatsu WA600-6 wheel loader stands ready to head back to work.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 15

JD 310SJ, Cab, Air, JD 700K, LGP, 30” 4x4, Ext Hoe, 1174 Hrs, Pads, 132” PAT Blade, 737 Hrs, #99982............ #98332............ $63,000 ...................... $163,000

JD 160DLC, 10’2” Arm, JD 180GLC, 10’ 6” Arm, JD 350GLC, 10’ 6” Arm, 28” Pads, Aux Hyd, 32” Pads, #98673.......... 28” Pads, Hyd Thumb, #97839.......... $129,000 ...................... $169,000 2864 Hrs, #94937........ ...................... $117,500

CEC Screen, 6 x 16 JD 9630, Scraper Tractor, #98203.............. Wheeled Screen, ........................ $129,000 #91758.......... $259,000

Bomag BW213PDH-3, JD 350GLC Material JD 670G, Low Cab, Air, Handler, 1111 Hrs, 84” Padfoot, #92390.... 12’ Blade, #75388........ ........................ $85,000 #52129.......... $398,000 ...................... $109,000

JD 800CLC, 11’10” JD 624K, Cab, Air, Hi Lift, GP Bucket, #95215 Arm, 36” Pads, CWRD, ...................... $159,000 #94252.......... $179,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 135G, 9’ 11” Arm, 28” JD 755D, 22” Pads, GP Pads, Mech Thumb, Bucket, 2532 Hrs, #95722............ $134,000 #98185.......... $149,500

JD 850K, LGP, 36” JD 400D, Cab, 8000 JD 650J, LGP, 24” Pads, 152” Semi U Gallon Water Truck, Pads, 124” PAT Blade, Blade, #75189 $179,000 #74752.......... $179,000 #99973............ $64,500

JD 544K, Cab, Air, QC, JD 550K, LGP, 24” Pads, 124” Blade, 1703 GP Bucket, #1000040.. Hrs, #96606....$119,000 ...................... $108,000

Page 16 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

A SHIN NING EX AMPL M E OF CUSTOMER INPUT. Our new 324E Skkid Steer packs customer-in nspired features and perfo ormance into an agile, XOWUD HIƟFLHQW FR RPSDFW GHVLJQ It features exceptional e reach at truck beds, b connect-underpressure auxiliaryy couplers, and your choice of controls including our exxclusive switchable electrohydraulic y ( (EH) option p that lets yyou select amongg different contro ol ppatterns, at anyy time, at the push of a button. TTo o learn l more, see your dealer or visit our website.

Burnsville, MN 952-890-8880

Sauk Rapids, MN 320-259-6222

Grand Forks, ND 701-772-4842

Aberdeen, SD 605-225-6772

Rochester, MN 507-282-8888

Moorhead, MN 701-526-2200

Minot, ND 701-852-3962

Sioux Falls, SD 605-336-2730

North Mankato, MN 507-387-1836

Bismarck, ND 701-223-5798

Williston, ND 701-577-0736

Rapid City, SD 605-348-1566

Marshall, MN 507-532-0994

Dickinson, ND 701-483-0115 www.rdoequipment.com

Minnesota Equipment Rogers, MN 763-428-4107 Minnesota Equipment Isanti, MN Jesse Kraft 763-444-8873 www.MinnesotaEquipment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 17

USE S D EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER. R

2007 CATERPILLAR 143HAWD, ID# HUC0380, S/N APN01099, 6206 HOURS................................$130,600

2014 CATERPILLAR 12M2, ID# PUC0165, S/N R9S00333, 502 HOURS............................................$236,600

2015 CATERPILLAR 304E, ID# PUC0226, S/N ME400127, 312 HOURS............................................ $56,500

2011 CATERPILLAR 140M2, ID# PUC0064, S/N M9D00240, 6405 HOURS...................................... $145,100

2012 CATERPILLAR 312EL, ID# 2CR5158, S/N MJD00292, 4457 HOURS.......................................... $86,240

2003 CATERPILLAR 420D, ID# PUC0256, S/N FDP09653, 4806 HOURS.......................................... $29,300

2005 CATERPILLAR 330CL, ID# HUC0357, S/N DKY02874, 14229 HOURS........................................$58,900

2012 CATERPILLAR 308DL, ID# PUC0269, S/N FYC02265, 2627 HOURS.......................................... $70,400

2014 CATERPILLAR 966K, ID# HUC0299, S/N TFS01231, 5357 HOURS..........................................$239,400

2015 CATERPILLAR 262D, ID# PUC0140, S/N DTB03436, 39 HOURS.............................................. $45,500

2015 CATERPILLAR 272D, ID# PUC0215, S/N B5W00977, 95 HOURS.............................................. $52,100

2014 CATERPILLAR 279D, ID# PUC0033, S/N GTL00955, 2112 HOURS.......................................... $45,500

2011 CATERPILLAR 740B, ID# PUC0079, S/N T4R00311, 7431 HOURS........................................ $232,400

2015 CATERPILLAR 249D, ID# PUC0228, S/N GWR00235, 238 HOURS.......................................... $46,800

2012 CATERPILLAR 257B3, ID# PUC0148, S/N B7H01086, 591 HOURS............................................ $38,500

2007 CATERPILAR 277C, ID# PUC0133, SN# JWF00243, 4533 HOURS................................ $24,500

Page 18 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GET POWERFUL PR RODUCTIVITY WITH BTI ATT TACHMENTS A ACHMENTS & ROCKBREAKE ER SYSTEMS

VISIT T US AT CONE EXPO BOOT TH #C30 0332

1-800-567-8267 I w w w.rock breaker.com m

U.S. Builders Boost Spending LiuGong President Nominated on Construction Projects for 2016 Top Manager Award CONSTRUCTION from page 1

projects to repair and replace the country’s aging infrastructure. For November, the 1 percent rise in residential construction reflected a 1.8 percent rise in single-family construction which offset a 2.7 percent drop in the smaller and more volatile apartment construction sector. The 1 percent rise in nonresidential construction followed a 1.6 percent decline in October. The gains in November were led by 7 percent jump in hotel and motel construction. The 0.8 percent advance in government projects reflected a 3.1 percent rise in spending at the federal level and a 0.6 percent

increase in construction by state and local governments. President Barack Obama sought for a number of years to get Congress to approve higher infrastructure spending, but he was blocked by opposition from Republicans who complained that the projects would increase budget deficits. Democrats in Congress have already expressed support for Trump’s proposals to boost construction spending. His ideas, however, may still face opposition from Republicans worried about high deficits.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Yu Chuanfen, president of LiuGong Machinery Co. Ltd. was nominated for the 2016 China Top Quality Manager by China Quality Association and All-China Federation of Trade Unions. China Top Quality Manager election campaign was initiated by China Quality Association and All-China Federation of Trade Unions in 2005. It aims to honor entrepreneurs and quality control experts who actively promote advanced quality management concepts, modes, tools, and methods during the implementation of national quality power strategy. Yu has worked in LiuGong for almost 20 years. He started his career as an engineer in LiuGong and was promoted to be the president in November 2013. Under his leadership, the company implemented comprehensive quality management strategies and maintained a stable operation and rapid development in the changing economy. For more information, visit www.liugong.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Yu Chuanfen, president of LiuGong Machinery Co. Ltd. was nominated for the 2016 China Top Quality Manager by China Quality Association and AllChina Federation of Trade Unions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 19

Volvo Used Equipment Contact your local dealer:

2012 Volvo EC480DL $215,000

2014 Volvo L90G $155,000

2012 Volvo EC340DL $170,000

2011 Volvo EC210CL CALL 2012 Volvo A40F, 2999 Hrs............$500,000

2012 Volvo A40F $295,000

2012 Volvo$169,500 A40F, 2999 Hrs............$500,000

John Doe 123.456.7890 john.doe@dealer.com Jane Doe 123.456.7890 jane.doe@dealer.com

Dealer Name City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 Contact your local dealer:

Aring Equipment 123.456.7890 Company, Inc. City, ST

13001 City, STW. Silver Spring Drive Butler, WI 53007 123.456.7890 City,King ST Jim 123.456.7890 262.781.3770 Mobile: 414.530.0592 City, 262.781.5053 ST Fax: 123.456.7890 Email: jking@aring.com www.aringequipment.com

2011 Volvo DD138HF 2012 Cat D6T XLVP $59,500 $219,500 2012 Volvo A40F, 2999 Hrs............$500,000

A40 Finance leasing available for 24 months with payments as low as $7,800 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Excavators – Wheeled

Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2012 A25F 2011 Volvo L220G Model,Volvo Hours ............................................................................... $XXX,XXX $169,500 $249,500 Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

Excavators – Crawler Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2013 Volvo EC300DLR 2015 Volvo L70H Model, Hours ............................................................................... $XXX,XXX $220,000 $165,000

Motor Graders Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

2014 Volvo L110H $210,000

DO NOT RUN COPY BELOW THIS RULE

DEALER LOGO

2012 Volvo A25F

2015 Volvo ECR235DL CALL

Page 20 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

McCann Industries Adds Carlson DOT Proposes to Paving Products Equipment Line Close Shortfall in Road Funding McCann Industries Inc. announced that the company now offers Carlson Paving Products road building equipment at all of its locations. Carlson machines are ideal for all road construction projects and include commercial pavers and accessories. Parts and service for all models also are available. “We are excited to introduce our customers to the Carlson paving line,” said Jim McCann, president of McCann Industries. “These machines are not only easy to operate and maintain, but their reliability and quality is unmatched in the industry. With our other lines, we now have everything required for any road building project.” The Carlson asphalt paving line is constructed from a single piece frame and heavy-duty components for a longer machine life cycle and superior quality. McCann also will provide parts, service and accessories for Carlson commercial pavers. The full line of Carlson road build-

MADISON, Wis. (AP) Gov. Scott Walker’s administration plans to close a shortfall in road funding by making cuts, delaying a number of major projects and borrowing $500 million. The Milwaukee Journal Sentinel reported that the state Department of Transportation has developed a budget proposal that would cut $447.4 million from state highway programs but provide nearly $70 million more for maintenance and $65 million more for local governments. The budget also would authorize $500 million in new borrowing but result in significant delays for some major projects, including: • Work on Milwaukee’s Zoo Interchange would take another two years. Most of the project would be finished by 2020 but all the work wouldn’t be finished until 2022. • No funding would be put into a $1.6 billion plan to reconstruct a leg of Interstate 94 south of Milwaukee. That McCann Industries Inc. announced that the company now offers Carlson will mean new delays for the project, which has long been a Paving Products road building equipment at all of its locations. low priority. • Work on Highways 18 and 151 on Madison’s south side ing products is immediately available (This story also can be found on would be delayed for more than two years, with completion at every McCann location. Construction Equipment Guide’s set for 2021 rather than 2019. For more information, visit website at www.constructionequip• Work on Highway 15 in the Fox Valley would take www.McCannOnline.com mentguide.com.) another year to complete, wrapping up in 2022. • Work on Highway 23 between Fond du Lac and Plymouth would take another three years. That project is already on hold due to litigation. Work to expand Interstate 39/90 between Madison and Illinois would remain on pace. So would work on Highway U.S. Transportation Secretary Anthony Foxx announced transportation solutions to cities across the country. 10/441 in the Fox Valley. Both projects are estimated to cost $300.3 million in grants to 32 University Transportation The Fixing America’s Surface Transportation Act (FAST more than $500 million over two years. Centers (UTCs) to advance research and education programs Act) specifies six research priorities which UTCs selected Funding for road projects, generated through the state’s that address critical transportation challenges facing the through this competition must address: improving mobility gas tax and vehicle registration fees, has become a major nation. of people and goods; reducing congestion; promoting safety; headache for state officials in recent years. Revenue from the The announcement includes awards of up to $72.5 million improving the durability and extending the life of transporta- gas tax has been dropping as people turn to more fuel-effifor Fiscal Year (FY) 2016. Subsequent awards using Federal tion infrastructure; preserving the environment; and preserv- cient vehicles and drive less. FY17 to FY20 funding will be made annually, subject to ing the existing transportation system. Nine of the grantees Walker proposed borrowing $1.3 billion in the 2015-17 availability of funds and grantee compliance with grant selected through the competition are new recipients of UTC budget to pay for roads, but lawmakers scaled that back to terms and conditions. Program grants. Thirty partners in the grantee consortia are $850 million. “Our nation faces unprecedented challenges from popula- minority serving institutions, and seven partners are twoThe Legislative Fiscal Bureau has estimated that just to tion growth, a changing climate, and increasing freight vol- year institutions. pay for road projects already approved the state would need umes. Universities are at the forefront of identifying soluConsistent with the FAST Act, the UTC program supports $939 million more. Walker has refused calls from his fellow tions, researching critical emerging issues, and ensuring applied and academic research on national transportation pri- Republicans to raise gas taxes or vehicle registration fees to improved access to opportunity for all Americans,” said orities at up to 35 competitively-selected colleges and uni- cover the shortfall. Foxx. “This competition supports the future transportation “Good roads and bridges are important to Wisconsin and workforce by providing students with opportunities to take versity consortia across the United States, currently encom- our economy, and this budget proves you don’t have to raise part in cutting-edge research with leading experts in the passing more than 100 institutions of higher education. This taxes or fees to maintain a safe and strong transportation netyear, for the first time, two-year institutions of higher educa- work,’’ the governor said in a statement to the Journal field.” tion were eligible to partner in the UTC consortia. Sentinel. The work of UTCs will help the United States meet the UTCs work with regional, state and local transportation Walker planned to appear at a series of news conferences impacts outlined in Beyond Traffic, a draft report documenting trends and challenges to the nation’s transportation sys- agencies and private sector partners to help find solutions to around the state to tout the proposal. The plan will provide a starting point as legislators begin tem over the next 30 years. Combined with the Smart City challenges that directly impact their communities and affect Challenge, a $40 million competition that will create a fully the efficiency of the nation’s transportation system, as well as crafting the state budget next year. Spokespeople for the Legislature’s budget-writing comintegrated, first-of-its-kind city that uses data, technology to educate the next generation of transportation leaders. For more information, visit mittee didn’t immediately respond to an email. Neither did and creativity to shape how people and goods move in the spokespeople for Democratic minority leaders in the Senate future and programs such as the Advanced Transportation https://www.transportation.gov/UTC (This story also can be found on Construction and Assembly. and Congestion Management Technologies Deployment (This story also can be found on Construction Equipment Program and the Mobility-on-Demand Sandbox, the depart- Equipment Guide’s website at www.constructionequipGuide’s website at www.constructionequipmentguide.com.) ment is leveraging multiple programs to bring innovative mentguide.com.)

$300 Million Slated for UTC Grants

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 21

CORPORATE HQ

ELMHURST

JOLIET

OGLESBY

ROCKFORD

HAMMOND

635 W. LAKE STREET ELMHURST, IL 60126

16822 W. LARAWAY RD. JOLIET, IL 60433

590 MAYER ST. OGLESBY, IL 61348

5055 SOUTH MAIN ST. ROCKFORD, IL 61102

6400 INDIANAPOLIS BLVD HAMMOND, IN 46320

Call Bobby Falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2013 CAT 349E VG TRACK EXCAVATOR SER#: KCN00292 $240,000

2014 CAT 324EL HMR TRACK EXCAVATOR SER#: PNW01572 $219,000

2008 CAT 226B2 CAB SKIDSTEER LOADER SER# MJH12997 $21,000

2012 CAT 262C AIR SKIDSTEER SER#: MST04740 $35,000

AC/HEAT, STRAIGHT TRAVEL, 36” TRACK, REAR CAMERA, HD PKG

AC/HEAT, AUX HYD, Q-COUPLER, REAR CAMERA, STRAIGHT TRAVEL PEDAL, GUARDING

EROPS, HEAT, AUX HYDRAULICS, STD FLOW, 60” GP BUCKET

EROPS, AC/HEAT, STD FLOW HYD, Q-COUPLER

2006 CAT 430E IT BACKHOE LOADER SER# DDT00277 $32,500

2013 CAT 416F BACKHOE LOADER SER#: KSF00629 $65,000

2014 CAT 950K WHEEL LOADER SER#: R4A02045 $220,000

AC/HEAT, EROPS, RIDE CONTROL, 4WD, EXT STICK

AC/HEAT, EROPS, EXT STICK, 4WD, GP BUCKET 1.25CYD

AC/HEAT, RIDE CONTROL, Q-COUPLER, GP-BUCKET; 4.24 CYD, RADIO

2009 CAT CS56 SMOOTH DRUM ROLLER SER#: C5S00825 $92,500

1991 CAT 140G MOTOR GRADER SN# 72V14554 $73,000

2009 CAT 299C MULTI TERRAIN LOADER SER# JSP00363 $49,999

2006 CAT 277B MULTI TERRAIN LOADER SER#: MDH03980 $16,900

AC/HEAT, PRODUCT LINK, EROPS

EROPS, ALL WHEEL DRIVE, 12’ BLADE, LIGHTS

AC/HEAT, HYD Q-COUPLER, AUX HYD, STD FLOW, RADIO

OROPS, STANDARD FLOW, QUICK COUPLER, BUCKET

2012 CAT 730 ARTICULATED TRUCK SER#: B1M03871 $249,000 AC/HEAT, CD/RADIO, PRODUCT LINK, CERT EMISSIONS

2007 CAT D6RIIILGP SER# WRG00784 $75,000

1997 CAT D6R TRACK TYPE TRACTOR SER#: 9PN00643 $52,500

EROPS, AC/HEAT, S BLADE, LIGHTS, ACUGRADE READY

17854 HOURS, EROPS, BLADE; S, SINGLE ANGLE TILT, TOPCON CONTROLS

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 22 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710 106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470

www.midcountrymachinery.com

JD 579

CAT 1029

DOZERS

BACKHOES

SKID LOADERS

2016 DEERE 410L, 52 hrs.................................... $CALL 2016 DEERE 310SL, 3 units..................................$CALL 2015 CAT 420F2, 2 units.................................. $99,000 2014 DEERE 310SK, 2 units.............................. $89,000 2012 NH B95C, 1112 hrs.................................. $63,000 2004 DEERE 310SG, 5377 hrs............................ $34,500

2016 CAT 289DXPS............................................$CALL 2016 KUBOTA SLV90-2, 2 units.......................... $62,500 2015 CAT 289DXPS, 3 units.............................. $79,500 2014 DEERE 319E, 700 hrs.................................. $CALL 2014 CAT 252B3, 350 hrs.................................. $32,500 2012 CAT 287C, 1194 hrs.................................. $47,500 2012 CAT 252B3, 3 units.................................. $32,500 2012 CAT 226B3, 1019 hrs................................ $24,000 2011 BOBCAT S185, 3760 hrs.............................. $CALL 2011 CAT 226B3, 670 hrs.................................. $28,000 1996 BOBCAT 751, 2026 hrs.............................. $15,500

2016 DEERE 700K LGP, 4 units..............................$CALL 2013 DEERE 650K XLT, 2113 hrs..........................$89,000 2013 DEERE 550K XLT, 1827 hrs..........................$99,500 2012 CASE 1650L WT, 2305 hrs.......................... $89,000 2012 CAT D6N LGP, 2509 hrs................................ $CALL 2011 CAT D7E, 1589 hrs.................................. $319,000 2011 CAT D6T LGP, 3120 hrs............................ $189,000 2011 CAT D3K XL, 667 hrs................................ $85,000 2011 CAT D3K LGP, 1100 hrs.............................. $66,500 2008 KOMATSU D61EX...................................... $CALL 2007 CAT D6T XL, 3248 hrs.............................. $157,500 2006 CAT D6N XL, 7703 hrs.............................. $75,000 2006 CAT D6R XL, 7226 hrs..............................$129,500 2006 CAT D6R XWIII, 7200 hrs..............................$CALL 2006 CAT D6N XL, 5400 hrs................................ $CALL 2005 CAT D6N XL, 9250 hrs................................ $CALL 2004 CAT D6R XW II, 13023 hrs.......................... $85,000 2003 CAT D6R XL II, 9574 hrs............................ $87,000 2003 CAT D6R XW II, 11874 hrs.......................... $99,000 2002 CAT D5M XL, 6666 hrs.............................. $62,500 1997 CAT D5M, 4600 hrs.................................. $42,500 1989 CAT D4H LGP............................................ $CALL

MINI EXCAVATORS 2016 LBX 80X3, 2units...................................... $CALL 2016 KOB SK55SRX, 3 units................................ $CALL 2016 KOB SK35SR, 5 units................................ $50,000 2015 CAT 308ECR, 59 hrs..................................$99,000 2015 KOB SK55SRX, 280 hrs..............................$57,500 2015 KOB SK35SR, 5 units................................ $41,000 2014 CAT 308ECR, 1426 hrs.............................. $79,500 2014 KOB SK17SR, 2 units................................ $24,000 2014 SANY SY75C, 465 hrs................................$63,000 2012 SANY SY75, 2267 hrs.................................. $CALL 2012 BOBCAT E50, 1033 hrs.............................. $49,500 2012 CAT 305ECR, 1306 hrs.............................. $51,000 2006 KOB SK35SR, 4465 hrs................................ $CALL

EXCAVATORS 2017 KOB SK210LC-9, 3 units.............................. $CALL 2016 LBX 350X4, 3 hrs...................................... $CALL 2016 LBX 235X3LC, 6 hrs.................................... $CALL 2016 LBX 210X3EX, 2 units..................................$CALL 2016 LBX 145X3DZ, 2 units..................................$CALL 2016 LBX 145X3LC, 25 hrs.................................. $CALL 2016 KOB SK350LC, 2 units................................ $CALL 2016 KOB SK260LC, 3 units................................ $CALL 2016 KOB ED160, 37 hrs.................................... $CALL 2016 KOB SK140SR, 2units..................................$CALL 2016 KOB SK85CS-3E, 3units............................$109,000 2016 SANY SY235CLR, 2 units.......................... $153,000 2015 LBX 160X3, 139 hrs................................ $128,000 2015 KOB SK140SR, 2 units............................ $132,000 2015 KOB SK210LC-9, 7 units.......................... $169,000 2015 DOOSAN DX160W-3, 30 hrs...................... $129,500 2014 SANY SY235C, 714 hrs............................ $135,000 2014 SANY SY215C, 1443 hrs............................ $96,500 2013 KOB SK295LR, 1183 hrs.......................... $205,000 2013 KOB SK260LR, 1094 hrs.......................... $195,000 2013 SANY SY135C, 721 hrs.............................. $82,000 2012 KOB SK210, 1511 hrs................................ $98,000 2012 CAT 336EL, 4431 hrs.............................. $159,500 2012 KOMATSU PC138, 1778 hrs........................ $99,500 2012 SANY SY135C, 848 hrs.............................. $82,000 2011 LBX LX160X2, 2702 hrs............................ $79,500 2008 KOB SK350LC, 3241 hrs.......................... $125,000 2006 KOB SK235SR, 4856 hrs............................ $75,000 2005 KOB ED150.............................................. $CALL 2002 DEERE 270C, 9307 hrs.............................. $49,000 2001 HYUNDAI 180LC3, 4383 hrs.......................... $CALL 1988 DEERE 490D, 5121 hrs.............................. $34,500 1979 CAT 245, 2622 hrs....................................$25,000

KUBOTA 25

LOADERS 2016 CAT 926M, 3 units...................................... $CALL 2015 KAW 80Z7, 160 hrs................................ $220,000 2015 KAW 70Z7, 271 hrs................................ $179,000 2015 KAW 67Z7, 263 hrs................................ $168,000 2015 CAT 926M, 165 hrs................................ $147,500 2014 CAT 950K, 2086 hrs................................ $187,000 2014 CAT 924K, 263 hrs.................................. $130,000 2014 KAW 80Z7, 723 hrs................................ $197,000 2014 KAW 80Z7, 1020 hrs................................$165,000 2013 KAW 60ZV2, 2516 hrs................................$79,500 2012 CAT 950K 3729 hrs..................................$159,500 2012 CAT 950K, 8463 hrs.................................... $CALL 2012 CAT 938K, 3376 hrs.................................... $CALL 2012 DEERE 624K, 3 units.............................. $129,000 2012 VOLVO L50G, 1143 hrs.............................. $83,000 2011 CAT 908H, 2334 hrs.................................. $49,000 2008 KAW 80ZV-2, 6953 hrs................................ $CALL 2007 KOMATSU WA250, 6285 hrs........................ $76,500 2006 KOMATSU WA250, 5522 hrs........................ $82,000 2002 DEERE 644H, 15,500 hrs.............................. $CALL 1999 CAT 980G, 28,716 hrs.............................. $69,000

COMPACTORS 2016 BOMAG BW177D-5, 61 hrs..........................$77,500 2015 DYNA CA2500D, 2 units.............................. $CALL 2015 DYNA CA2500PD......................................$93,000 2015 BOMAG BW177D-5, 228 hrs........................ $69,500 2014 DYNA CA1300PD, 2 units..............................$CALL 2007 IR SD116F, 1203 hrs................................ $78,000 2005 CAT CP433E, 2 units................................ $46,500 2005 IR SD122DX, 2559 hrs................................ $CALL

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 23

IMAGINE WHAT’S NEXT. Register today to get the ultimate view of where earthmoving is going. Imagine embedding the latest technology in your operation. Imagine learning innovative maintenance strategies. Imagine seeing what’s next from over 2,500 exhibitors spread out over 2,500,000 square feet. Imagination becomes reality in Las Vegas on March 7–11, 2017—and if you make your reservation right now, you can ensure your spot at this huge event... and save!

Get the special $149 rate (and save up to $100) by registering early at www.conexpoconagg.com.

March 7–11, 2017 | Las Vegas Convention Center | Las Vegas, USA

IF IT’S NEW, IT’S HERE.

Co-located with

Page 24 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hitachi Excavators ‘Star Players’ on Green Bay, Wis., Project In Green Bay, Wis., Hitachi excavators have proved to be game changers on the Titletown District development, a destination area to be created on approximately 34 acres of land immediately west of Lambeau Field. The ZX160LC-3, ZX380LC-6 and ZX470LC-6 Hitachi excavators that worked on the Titletown District development belong to Joe DeNoble Sewer & Water, a familyowned business started in 2002 that’s headed by Joe DeNoble. Joe’s wife, DeAnne, works in the office, and his daughter, Heather, works there part-time in addition to a full-time job. His two sons, Eric and Nick, are operators, and they’ll eventually run the company. And you can’t complete the line-up

without another vital family member and employee, the company’s 216-lb. mascot, Bernie. “My dog Bernie is the mascot for the company,” Joe said. “He’s with me 24/7, and he goes to every job site with me. He’s ridden in my truck since he was six months old; he’s eight years old now. Bernie’s got over 400,000 miles on him, riding in the back of my truck. He’s well-known in the area and a big part of the family.”

Owners Joe and DeAnne DeNoble of Joe DeNoble Sewer & Water.

Joe DeNoble Sewer & Water’s mascot Bernie.

The Hitachi excavators have moved about 75,000 cu. yds. (57,342 cu m) of material to install over 4 mi. (6.4 km) of pipe for sewer, water and a storm water underground storage system

Titletown District Development Joe purchased the ZX380LC-6 in December 2015, with the ZX470LC-6 joining the fleet in April 2016. Both excavators began working on the Titletown District development in May 2016. The Titletown District development is bound by Lombardi Avenue, South Ridge Road, Marlee Lane and Brookwood Drive. Joe DeNoble Sewer & Water is involved in Phase 1 of the project, which is designed to maximize its unique location right next to Lambeau Field to attract more visitors to the area, spur additional regional economic growth, offer new amenities to residents and complement the greater Green Bay area’s draw as a location to live, work and play. Phase 1 of the project consists of 21 acres, including six acres of a planned 10-acre public park that includes a sledding hill, skating area, plaza and more. The project also will have as many as 70 townhouses along Brookwood Drive, and 180,000 sq. ft. of commercial space along Lombardi Avenue and Marlee Lane. The Hitachi excavators have moved about 75,000 cu. yds. (57,342 cu m) of material to install more than 4 mi. (6.4 km) of pipe — 36-in., 6-ft. and 8-ft. (91 cm, 1.8 m and 2.4 m) diameter pipe — for sewer, water and a storm water underground storage system, all backfilled with granular material. Eric DeNoble and fellow operator Dan Kaster were both pleased with the excavators’ performance on the job. “We got the 380 at the end of winter, and it fired up every day,” Eric said. “It’s continued to be dependable.” see DENOBLE page 40

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 25

CONTACT 800-572-3267 Your Used Equipment Specialists Since 1957

#T1776 2015 WITZCO CHALLENGER RG50, 50Ton Ground Bearing Detachable Tri-Axle Lowboy, 22' Loadwell w/Outriggers, 48' 6" Overall Length, Self-Contained Hyd, w/10HP Briggs Stratton Gas Engine, Torsion Suspension, 255/70 R 22.5 Tires on 10 Stud Unimount Budd Wheels, UNUSED, FET PAID............................................................$34,500

www.adamsequipment.com

#9937 CAT 416C 1-YARD 4X4 LOADER BACKHOE, 75HP, Dsl, Heat, Powershuttle Trans, 2 Lever Controls, GP Loader Bucket, 24" Hoe Bucket w/Teeth, NEW 19.5L-24 Rear Tires & 12.5/18 Front Tires............................................................ $31,000

#10133 CAT D6M XL HYDRAULIC 6-WAY DOZER, 140HP, Dsl Heat/AC, Eng Encl, PS Trans, FTC Steering, DB, Very Good Undercarriage w/24" Pads, NEW Sprockets, Sealed & Lubricated Rails, Rollers & Segments................................................$53,500

#9543 CAT 320CL 1.83-YD HYDRAULIC EXCAVATOR, #10175 CAT 312CL 1 YD HYDRAULIC EXCAVATOR, #10145 CAT D5G XL 6-WAY DOZER, 90HP, Diesel, 128HP, Diesel, Heat/AC, 9’6” Stick, 44" Bucket 90HP, Diesel, Heat/AC, 8' 2" Stick, 34" Bucket With Hydrostatic Drive Rebuilt Drive Motors, Good w/Teeth, Very Good Undercarriage w/31.5” Pads.... Teeth, Good Undercarriage w/ 23.5" Pads $54,500 Undercarriage w/ 20" Pads........................ $42,500 ....................................................................$86,500

#10122 CAT 279C MULTI-TERRAIN TRACK LOADER, 82HP, Diesel, Heat/AC, 80" GP Bucket w/Bolt on Edge, Auxiliary Hydraulics, Very Good Rubber Tracks..........................................................$47,500

#10171 CASE SV300 SKID LOADER, 84HP, 4 Cyl Dsl, Encl. Cab w/ Heat & AC, Aux Hyd, Hi Flow, Ride Ctl, Radio w/Aux for Phone, Hyd Disconnect, 2 Speed, Joystick Controls w/Pattern Changer, Block Heater, 84" GP Bkt, 12 x 16.5 Foam Filled Tires...... $31,500

#10178 JOHN DEERE 570 TANDEM DRIVE ARTICULATED MOTOR GRADER, 83HP, Diesel, Cab w/Heat, Front Scarifier, 12' Sliding MB Good Condition, Very Good Tires........................ $27,000

#10152 CAT 950G II 4.5 YD ARTICULATED 4WD WHEEL LOADER, 183HP, Dsl, Heat/AC, 4F-4R Powershift w/Variable Speed Control, GP Bucket w/Bolt on Edge.......................................... $57,500

#9838 CAT D6R LGP HYDRAULIC STRAIGHT DOZER #9830 JLG 660SJ 4x4 Self-Propelled Telescopic #10109 CAT 320DL 1.3 YD HYD EXCAVATOR, W/TILT, 185HP, Diesel, New Diamond Mfg Cab Manlift, 65HP, Dsl, 4WD, 66' 8" Maximum Platform 148HP, Diesel, Cab w/Heat & AC, 9' 6" Stick, 24" w/Heat & AC, Eng Encl, PS Trans, Diff Steer, DB, VG Height, 500 lb Capacity, Hydraulic Leveling, Good Bucket w/Teeth, Very Good Undercarriage w/31" Undercarriage w/New Sealed & Lubricated Rails, Tires............................................................ $34,500 Pads..........................................................$104,500 Top Rollers & Segments, w/36" Pads........ $87,500

#T1778 1997 CHEVROLET 3500 HD BOOM TRUCK, Diesel, Regular Cab, Dually, Chrome Wheels, Pintle Hitch, Side Boxes, 300# Cap, 32" Height, Lift all Model LAH-32-1s, New Automatic Transmission, Aluminum Running Boards, Pistol Grip Controls................................................ $8,750

#9735 CAT D6R XL HYDRAULIC SU DOZER W/TILT, 175HP Diesel, Heat/AC, PS Transmission, Differential Steering, Fingertip Autoshift, Drawbar, Good Undercarriage w/30" Pads................ $78,500

#10151 CAT D7H HYDRAULIC SU DOZER W/TILT, 215HP, Diesel, Canopy w/Screen, PS Transmission w/Differential Steering, Draw Bar, Good UC, w/26" Pads............................................................$54,500

For our full inventory, please visit www.adamsequipment.com

Page 26 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2006 Case 550HLT 3A Dozer, 3113 Hrs, Stk# P10549 $45,000

2015 Case TV380, 306 Hrs, 84 hp, Tier 4A EROPS Cab w/Heat & Air, Stk# P08824 $65,000

2012 Case 580SNWT4A, 1471 Hrs, Cab Heat/Air, Wide Track 4WD Extendahoe, Stk# P05286 $88,500

2012 Case SR175, 1335 Hrs, OROPS, H Pattern Controls, Stk# P07497 $28,700

Case 70XT SSL, 2700 Hrs, OROPS, H Pattern Pilot Controls, Stk# P09546 $22,700

2007 Case Construction 580SM III, 3944 Hrs, Stk# P06371 $47,700

Case TR270 CTL, 478 Hrs, Tier 4 Final, 72” Bkt, Cab w/Heat & A/C, Stk# P09381 $44,700

2012 Case TR320HF CTL, 950 Hrs, High Flow Plus Auxiliary Hydraulics, Stk#P04571 $54,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 27

563-87 72-4112

(DUBUQUE) BELLEVUE, ELLEVUE, IOWA

WWW.JJSCHECKEL.COM HECKEL.COM

CLE EAN,, WORK-READY EQUIPMENT Q IN IO OWA - WE OWN WHA AT WE ADVERTISE E! RENTOR

BUY!

RENTOR

BUY!

RENTOR

BUY!

2009 CAT D D10T - $245,000 ER - $215,000 2007 SMI 516T SPYDER YDER - $150,000 2007 CAT AT D10T - $295,000 2011 KPI FT4250CC - $3 325,000 ‘07 SMI 4043T CRUSHE l SSiingle 2 800 Hrs, 2,800 Hrs Mobile M bil b l track, t k 600 TPH, PH 3 wayy screen. BBelts ltl lik like RJG series, RJG Series, S i EErops p , U blade bl d w// twin t i tilt tilt, gl shank h k i Low L hour h componen p t history, hist y, Er E ops p, M bil Track Mobile T k Mount M tedd IImpac p t Crusher h r,, 4,900 4 900 Hrs, H Hrs Mobile M bil Track T k Mount M tedd Impac I p t Crusher C h r, 4,730 4 730 Hrs, H Hrs g pain p t. Easy life as topsoil p il screen. Remote Single ripper pp r,, New N trackk gr g oups p . Service records d available. il bl V good, g shank ripper pp , U Blade B d w// twin tilt, Very f b h d. Remote Control. new, Original 300 TPH, Completely refurbished R d remotte control. 500 TPH, Closed circuit, Radio H d ffoldable ld conveyers. RRent/L /Lease or Buyy.. clean 84k spent in 2012 0122 for f complete rebuild by CAT dealerr.. l condition. d FFrom m reputable original ownerr.. $584k Side stacker & magnet options. Rent/LLease or Buy. Side stacker & magnet options. Reent/Lease or Buy. control,l Hyd

RENTOR O

BUY!

2006 CAT D10T - $245 5,000 , 1996 CAT D9R - $2 225,000 1971 CAT D7FF - $26,500 2014 CAT D6T X XW VPAT - $285,000 2014 CAT D6T 6T XW VPAT - $235,000 Low hour h componen p ts, Erops p , U blade bl de w/ twin tilt, D9R Pull Scraper p Tractorr,, 7TL seri series es, 0 hour engine g . Local Iowa owner-oper p atorr tractorr,, Upda p ted 3306 Onlyy 906 original g hourss, 302 at idle. Erops p , A/C, Heat, 2,300 Hours, Erops, A/C, Diff steerr,, GPS readyy,, Single g shank ripper ipp r,, Very V y ggoodd undercarrriage g . 1 Ownerr,, Rigged gg to newly ly converted/rebuilt 631 ppullll scraper p r,, Spacer Plate engine g , AAux hydraulics, OOppen canopy,y, GPSS ready dy,y, DDiffff steerr,, 6-w wayy PAT AT blade, blade As A close to new New track gr g oups p , Excellent condition. Full history. $354k builds F ll service i hi 54k spent iin rebu ild last l 3 yrs. ppricedd separately. e /L or Buy. y Rent/Lease p ly Excellent E UC. Extr E ra clean. l RReady dy to ggo. P er shif Pow h fftt, EEx-Military M y tract t orr,, some hhistory. hist y as you y will find! Super p r clean. Rent/Lease or Buy. y

RENTOR

BUY!

2003 CAT D6R LGP - $6 65,000 Local trade in, Diff steerr,, A/C, GGood UC, U Erops p. 11,300 Hours, 3,300 at idle. Original g condition, original paint. Straight blade l d w/ w/ tilt.

2008 CAT 365CL - $2 285,000 Only 6,800 Hours, Customer tradee, 2 Buckets, All options, Service S history,y, Excellen Ex nt condition. , Rent/Lease or Buyyy.. OR

RENT

BUY!

1994 CAT 992D - $470 0,000 , Fullyy refurbished, f b h d $$352,000 workk orddeer jjust spen p t. 2,000 hour main componen p ts. NNeew titires!! 2 Call for documents. d

2001 CAT 777D - $ $280,000 Fully lly refurbished f b h d. $$100,0000 spent. Veryy goodd tiri es, details andd ppici turess on our website. b N truck, Nice k Rent/Lease R /L e or Buyy..

RENTOR

BUY!

RENTOR

BUY!

2013 CAT 32 29EL - $168,000 2014 CAT 336EL L H - $235,000 2012 CAT AT 320EL - $142,000 lly loadedd, 10’6”” stick stick, k Hyyddraulic l qquick 2,200 Hours, 46” buck bucket b k , 9’6”” stick stick, k A/C, rear view 2,200 Hours, OEM hyydraulic thumb, Aux hyydraulics, 3,800 Hrs, Fully coupler p r,, Auxiliary A ili hyd d Longg and wide h draulics, ide UC. camera, Aux hyydraaulics available, Veryy nice machine, Original pain p t, Exceellent condition. 42”” bucket. b k 1 Ownerr,, ve buck very clean. Rent/Lease R /L or Buy. Buy Fully serviced, Exce E llent condition. Rent/Lease /L or Buy. Rent/Lease R / e or Buyy.. R R O O OR

RENT

BUY!

2013 CAT 740B B - $188,000 , 9,150 fframe hours; h 1,9700 at a idle. dl Fully lly loaded, A/C, Tailga g te, Veryy ggood Raddial tires. Original igi l paint. S Super clean truck. k Ren R nt/Lease or Buy B y..

RENTOR

BUY!

2012 CAT 7 740B - $188,000 , 9,059 fframe hours; h 3,031 at a idle. dle Originall paint, Fullyy loaded, A/C,, 90% Radial tires. Super p clean trucks k ready to go. Rent/Lease or Buy. Buy

RENTOR

BUY!

(3)2003 Noble Scrapers - $26,000 EA. 2012 CAT C CP56 - $89,000 2013 CAT CP56 6B - $89,000 APERS 631P PULL SCRA ) ((3)CAT h Enclosed l d cab. Front 84”Vibratory ” b y ppadd foot. 2,4460 hours, h Front bl blade 84”Vibratoryy ppadd foot. 3,,260 hours, 17 Yar Yard ppullll scrapers, Low overaall hours, Original EA EACH 0 $65 000 IONS - $65,0 NEW CONVERSIONS blade option, p i , O riginal i g ppaint. Veryy well maintained. option, , O riginal g l pain p i t. Very y w ell maintained. F ully condition, P Purpose-built, b Extrem me-duty y, y , Ejec j t style l y capacity. ard y 0 30 , Pull to p converted AT 631C Scrapers CAT Fully F ll serviced i d andd readdy to go. Rent/Lease / or Buy. serviced i d andd ready d to go. Rent/Lease R or Buy. construction scrapers. Very cleean andd straight. rebuilt. l d all hydraulic cyllinders Refurbished as needed,

J.JJ. SCHECKEL RENT TS 1/3/6 Mo M Co Contracts. t t Re R nt/Pur t/P rchase h O ti Options.

RENT

BUY!

(3)2006 CAT T 740’s - $128,000 , EA. BB1PP SSeries. All 3 bough b ght new together g h . Full service histtory,y, Good G d rubber. Fully lly loaded l d . Solid machines, ready d to go. Rent/Lease L or Buy. Buy

USED AND N RECONDITIONED PA ARTS HOTLINE Genuine OEM EM Cat Full availabilit lity of used CA ATT par p ts, 50% off list, carriiers, h housings, gears, etc. Also huge selec election of attachments and d componen nents in stock. If we don’t ha h ve it, we will find it! Parts locatin ng service. Call Mattt Meyyer er 563-872-4112

VISIT OUR WEBS SITE FOR DETAILED D PHOTOS AND DESCRIPTIO ONS! WWW.JJSCHE ECKEL.COM

Ph: 563-872-4112 563 872 4112 | Fax: 563-872-5058 563 872 5058 | sales@jjscheck s el com | 21582 Hwy 62, el.com 62, Bellevue v , Iowa 52031 | www w w.jjscheck .jjscheck jjscheckel.com el com

Page 28 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Caterpillar Announces Appointments Construction Costs Following the previous announcement of changes and appointments in Caterpillar’s executive office, and due to the retirement of two long-serving vice presidents, Caterpillar Inc. announced its board of directors has appointed three new vice presidents. Kent Adams to Retire After more than 38 years with Caterpillar, Kent Adams, president and CEO of Caterpillar financial services corporation and Caterpillar vice president of the financial products division, has elected to retire. “Under Kent’s guidance since 2005, Cat Financial has been a stable source of earnings through challenging business cycles, including the global financial crisis,” said Jim Umpleby, Caterpillar CEO-elect. “Kent leaves a lasting legacy for Caterpillar through his relentless focus on improving the customer experience as well as developing and nurturing a people-focused culture for employees working for Cat Financial.” Adams joined Caterpillar in 1979 and performed various finance functions in positions of increasing leadership at Caterpillar Americas Co., the North American commercial division, Caterpillar Asia Pte. Ltd. and Caterpillar Brasil Ltda. before joining Cat Financial in Nashville, Tenn., in 1998 as vice president responsible for European operations and marine vessel finance. He was a member of the Equipment Leasing and Finance Association board of directors, the Financial Services Roundtable, the Nashville branch of the Federal Reserve Board of Atlanta, the Nashville Area Chamber of Commerce and the board of the United Way of Metropolitan Nashville. Mike DeWalt to Retire After more than 35 years with the company, Mike DeWalt, vice president of the finance services division, has elected to retire. “For more than 10 years, Mike has been the trusted face and voice of Caterpillar for the investment community, leading our investor relations group with a steady hand and a deep knowledge of every part of the company’s global operations and the markets we serve,” Umpleby said. “Mike has provided effective leadership for a number of financial activities, including corporate treasury, economics, business risk management, competitive analysis, strategic planning and strategic investments.” DeWalt joined Caterpillar in 1981 as an accountant and progressed to a

series of positions in the accounting and finance areas. From 1996 to 2001, DeWalt was the senior finance leader of F.G. Wilson in Northern Ireland and Perkins Engine Company in Peterborough, U.K. — both wholly owned subsidiaries of Caterpillar. Following those assignments, he was named director of strategic investments, leading Caterpillar’s corporate mergers and acquisitions group, and was the director of Investor Relations from 2005 to 2012. In 2012, DeWalt became the corporate controller, and in 2013, he was appointed vice president of the strategic services division. Joe Creed Named V.P. of Finance Services Division The company’s board of directors has appointed Joe Creed to replace DeWalt as vice president of the finance services division. Creed is currently chief financial officer of Energy & Transportation, effective Jan. 1, 2017. “Joe brings deep expertise in the areas of financial reporting and accounting to this role,” Umpleby said. “Over the course of his nearly 20 years with Caterpillar, Joe has held leadership positions in accounting and finance with increasing levels of responsibility at the corporate level, as well as with business units in both our engine and machine businesses,” Umpleby added. Zack Kauk Named V.P. of Excavation Division Caterpillar’s board of directors has appointed Zack Kauk, vice president of the excavation division, effective Jan. 1, 2017. Kauk is a 27-year veteran of Caterpillar, and during his career has held multiple leadership positions in engineering and product management roles in Europe, Asia and the United States. He is currently worldwide product manager for medium excavators and is based in Singapore. “Zack and his team have delivered innovative solutions to enable our customers to maximize productivity. He brings an extensive global product management and engineering background to his new role as the leader of the excavation division,” Umpleby said. Dave Walton Named V.P. of Financial Products Division The company’s board of directors has appointed Dave Walton as president and CEO of Caterpillar Financial Services Corporation and Caterpillar vice president of the financial products division.

Walton is a 28-year Cat Financial veteran and is currently vice president of Cat Financial Services Corporation with administrative responsibility for North America Sales, Cat Mining Finance and Cat Financial Commercial Accounts. “During his career, Dave has held leadership positions with Cat Financial serving customers across Europe, Asia and the Americas, giving him the broad global perspective required to lead the financial products division. Dave has become known for his dedication to helping our customers succeed,” Umpleby said. Walton has served on the Asia Pacific board of directors for Junior Achievement International. He will assume his new duties April 1, 2017, and will relocate to the financial products division headquarters in Nashville, Tenn. Jill Daugherty Appointed Chief Audit Officer The board of directors has appointed Jill Daugherty, currently Caterpillar’s corporate controller, as chief audit officer. In this role, Daugherty will work with the board audit committee and Caterpillar executive office to ensure a strong internal control environment. Daugherty joined Caterpillar as an intern in 1990. She has held a series of positions with increasing responsibility in accounting and business support, including senior roles in Asia, Europe and the United States. Daugherty will assume her new position Jan. 1, 2017. The current chief audit officer, Kim Doe, will assume a leadership role within resource industries.

Rise to End 2016 on High Note Construction costs rose for the second straight month, according to IHS Markit and the Procurement Executives Group (PEG). The headline current IHS PEG Engineering and Construction Cost Index registered 53.3, up from 50.7 in November, continuing the recovery after a 22-month slump in prices. Strength was evident in both labor and material markets. The current materials/equipment price index came in at 53.3 in December after two months of falling prices. Six of twelve categories tracked in the materials sub-index showed rising prices, three had falling prices, and prices remained unchanged in three categories. Pumps and compressors registered falling prices once again; prices have been falling for this category for almost 17 months. Exchangers had a similar profile, with prices only reaching the neutral mark this month after falling for 16 months. Weakness in these two categories indicates the recent strength in raw materials has yet to filter uniformly into intermediate and final goods. “Notwithstanding the stronger readings of the past two months in the materials/equipment index, upstream commodity prices look exposed at the moment and poised for a correction,” said John Mothersole, director of research at IHS Pricing and Purchasing. “While we do see leverage becoming more evenly balanced between buyers and suppliers in 2017, we expect upstream commodity markets to reset in the months immediately ahead with prices pulling back at least temporarily to better reflect underlying fundamentals.” The current subcontractor labor index came in at 53.1 in December, slightly lower than the 54.1 November reading, but still presenting positive momentum. In the Northeast, Midwest and Southern United States, labor costs rose; in the West, costs remained the same as November. Even areas affected by the downturn in energy markets are feeling the effects of a tightening labor market. In Canada, labor costs remained the same in both eastern and western regions. The six-month headline expectations index recorded another month of increasing prices, with the index moving from 65.1 in November to a strong 68.9 in December. The materials/equipment index rose from 66.4 to 73.3, affirming widespread expectations of higher future prices. Every component showed rising prices; there were no expectations for softer materials prices. Sub-contractor labor price expectations came in at 58.7 in December, slightly lower than the November figure of 61.9. In the United States labor costs are expected to rise in every region. In Canada, labor costs are expected to remain the same. In the survey comments, respondents have noted no supply shortages of materials. Proposal activity has registered an uptick in the recent months, and participants are showing increased optimism for 2017. For more information, visit www.ihsmarkit.com.

Kyle Epley Appointed Corporate Controller Caterpillar’s board of directors has appointed Kyle Epley, currently chief financial officer for customer & dealer support, as corporate controller. In this role, Epley will have responsibility for business analysis, competitive analysis, economics, strategic planning and operating and execution model governance. Epley joined Caterpillar in 1996 and held a series of positions with growing responsibilities in accounting and finance. He will assume his new position Jan. 1, 2017. For more information, visit caterpillar.com. (This story also can be found on Construction Equipment Guide’s (This story also can be found on Construction Equipment website at www.constructionequipGuide’s website at www.constructionequipmentguide.com.) mentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 29

Page 30 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Pipeline Protests⁄

Backwater Bridge Proves Key to Restoring Relations in N.D. By Blake Nicholson ASSOCIATED PRESS

BISMARCK, N.D. (AP) Reopening a bridge near the main Dakota Access pipeline protest encampment is key to restoring better relations between the state and the Standing Rock Sioux tribe, according to North Dakota’s now-former governor and the tribal chairman, but the effort will take weeks if not months. The bridge, unofficially called the Backwater Bridge, has been closed since late October, when protesters of the four-state, $3.8 billion pipeline blocked the bridge with burning vehicles, damaging the structure. It’s also the site of several clashes, including on Nov. 20, when authorities used tear gas, rubber bullets and water sprays on protesters who they say assaulted officers with rocks and burning logs. The state Transportation Department has said they can’t inspect the bridge until they know their workers will be safe, though pipeline opponents believe the closure is meant to block the north end of the federal land, where hundreds of protesters are

“Special equipment will need to be brought to the bridge site and may require a shelter or structure to be placed on the bridge in order for an adequate testing environment.’’ Jamie Olson North Dakota Department of Transportation

camped out. Before he left office Dec. 15, Gov. Jack Dalrymple met with Tribal Chairman Dave Archambault, agreeing to enlist the Bureau of Indian Affairs to help ensure the safety of inspectors so that the bridge can reopen. Dalrymple in a statement said reopening the bridge “will be a strong signal of cooperation to return area living conditions to a more normal state,’’ while Archambault told The Associated Press that doing so removes a roadblock to emergency services and commerce. The bridge, on state Highway 1806, is the main route to get to the tribe’s casino. “If there’s a way that we can help so that

this bridge is opened, it’s a step forward,’’ Archambault said. A timeline hasn’t been finalized, but Transportation Department spokeswoman Jamie Olson indicates it will be a slow process, with testing of the bridge being done “in the next few weeks.’’ Core sampling to evaluate the concrete requires temperatures around the freezing mark for machines to work properly, she said, and the state has been blanketed by frigid arctic air for weeks. “Special equipment will need to be brought to the bridge site and may require a shelter or structure to be placed on the bridge

in order for an adequate testing environment,’’ she said, adding that the samples will be sent to a special lab. The highway itself also has been damaged and will need to be repaired before the roadway can be opened, Olson said. With the protest camp thinning out to a few hundred people due to the stalled pipeline work and harsh winter weather, officers have moved back from the bridge to deescalate tensions but are monitoring it from afar and will respond if protesters try to cross a blockade of cement barrier and razor wire, Morton County sheriff’s spokesman Rob Keller said. The pipeline that is to carry North Dakota oil 1,200 mi. to Illinois is stalled while Texas-based developer Energy Transfer Partners and the Army battle in federal court over permission for the pipeline to cross under the Missouri River. The Standing Rock Sioux and its supporters say the pipeline threatens cultural sites and drinking water; ETP says the pipeline will be safe.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

AGC Official Weighs in⁄

Changes to Come for Missouri Construction Industry in 2017 By Len Toenjes AGC OF MISSOURI

Leonard Toenjes, CAE, president of AGC of Missouri.

Where is the Missouri construction industry headed in 2017? If anyone tells you they have a certain answer to this question, they probably also have a bridge in Brooklyn they would like to sell you. After a series of surprises in 2016, we should expect changes on several fronts pertinent to our industry — legislative issues, labor relations and infrastructure funding as well as the economy overall. With a new administration in Washington D.C. and a Missouri legislature that is largely controlled by the Republican party for the first time in many years, we can expect there will be some significant changes coming from federal and state lawmakers. Our partners in the industry — AGC of America and ARTBA — will continue to champion issues that are important to the industry and will continue to keep us up to date on departmental appointments and regulatory changes. Topics taken up by the National Labor Relations Board and the Environmental Protection Agency are two leading indicators of where our industry is heading. Early indications at the state level, the Missouri legislature,

point to changes on right-to-work, tort reform, regulatory reform and tax credit issues — all of which have significant impact on Missouri contractors. AGC of Missouri also is investing resources and working with organized labor to best manage the changing labor environment for Missouri contractors. We are working to help these contractors remain competitive for years to come. There has been a lot of speculation about the trillion-dollar infrastructure program proposed by our new president, and uncertainty regarding how these funds will be generated and distributed throughout the United States transportation system. Currently, Missouri faces a budget challenge as it spends down its reserves to keep the state program solvent for a few more years. We need to continue to reach out to legislators to advocate for infrastructure funding. As the economy continues to improve, contractors are expressing optimism about 2017, and many of these changes could be good news for the construction industry. In 2017, AGC of Missouri will continue to advocate for changes that will benefit the state’s contractors. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ January 14, 2017 â€¢ Page 31

BACKHOE LOADERS Deere 310SE, 1998, 9043 hrs, 3ZU VKLIW WUDQV [ w ENW H[W KRH WLUHV ...... $21,900 Deere 310SJ, 2008, 2927 hrs, &DE Z R DLU [ SZU VKLIW WUDQV H[W GLSSHU w EN .... $44,500 Deere 410E, 1998, 6895 hrs, Cab w/o air, 4.4 pwr shift trans, ext dipper, frnt cplr ..... $27,500 Deere 410E, 2000, 10050 hrs, [ ULGH FQWUO DX[ K\GU w ENW H[W KRH ............... $22,900 Deere 410G, 2001, 3758 hrs, Turbo, 4x4 pwr shift trans, aux hyd, ext. hoe, bkt ....... $34,900 Deere 410G, 2002, 5285 hrs, 7XUER [ SZU VKLIW WUDQV TFN FSOU w ENWV ............ $36,900 Deere 410G, 2005, 4622 hrs, AC, pilot cntrls, ext hoe, 4x4 pwr shift trans, qwk cplr ... $37,500

CRAWLER DOZERS Deere 700J, 2007, 4845 hrs .. $64,000 Cat D6M XL, 2000, 7001 hrs 5236 H[WUD ORQJ WUDFN w SDGV ........................ $47,000 Cat D7H, 1990, 30593 hrs /YU 6WHHU /QJ 7UFN &RYWU 7UDQV w SDGV 6HPL-U Bld ..... $39,900

EXCAVATORS

SAVE TIME â€¢ SAVE MONEY SAVE LABOR â€¢ SAVE OIL â€¢ â€¢ â€¢ â€¢ â€¢

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool â€¢ One hand installation â€¢ Eliminate hydraulic oil spills & clean up â€¢ Quick installation & ease of usage â€¢ Safe for personnel & environment â€¢ Industry acclaimed â€¢ 100% Made in USA INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available

All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

Deere 200C LC, 2005, 10170 hrs AC, lng arm; std boom; lng trck, aux hyd, cplr ... $57,500 Deere 290G LC, 2011, 2432 hrs $& FSOU DX[ K\U w ENWV ................. $172,900 Deere 350D, 2008, 8117 hrs AC, med lng arm, std boom, wide pads, bkts ............ $84,000 Deere 450DLC, 2006, 8530 hrs, AC, med-lng arm, wide pds, cntr wgt rmvl w/bkt .. $96,975 Hitachi ZX85USB-3, 2011, 2207 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w ENW . $77,500 .......... $104,000 Deere 350D, 2009, 6705 hrs Hitachi ZX370, 2005, 12346 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w w ENWV . $62,900 ..... $149,000 Deere 350D, 2008, 6545 hrs, , ...... $54,900 Komatsu PC200LC, 2007 , ....... $89,000 Komatsu PC600, 2004, , .. $22,500 Komatsu PC400, 1990, Volvo ECR235, 2014, 1296 hrs, .... $154,000

SKID STEERS Deere 320D, 2012, 414 hrs, AC, EH cntrls, air seat, hi-flo, rev fan, GP bkt ............ $35,000 Deere 328D, 2012, 631 hrs, AC, EH cntrls, air ride seat, 2 sp, self-leveling, ........... $34,500 Deere 323D, 2011, 1024 hrs, &DE Z $& IRRW FQWUOV VSG UXEEHU WUDFNV w ENW .... $29,500 Deere 328D, 2010, 875 hrs, Cab w/AC, foot controls, 2 spd, gen purpose bkt ........ $32,500 Deere 318D, 2012, 239 hrs, A/C,EH cntrls, BBT,gen purp bkt ......................... $27,900 Deere 320D, 2013, 344 hrs, &DE ZLWK $ & (+ FQWUOV w ENW .......................... $35,900

WHEEL LOADERS 2014 JD 544Ks - 2 in stock, 985-1655 hours, starting @ $139,000 2015 JD 544Ks - 11 in stock, 300-500 hours, starting @ $145,000 (AC, Coupler, 3 yd bkts, some avail. w/3rd valve & Hi Lifts, municipal owned) Deere 544E, 1990, 9811 hrs, Cab w/o AC, 17.5 tires, gen purp bkt ................... $25,000 Deere 524K, 2013, 1593 hrs, AC, 3 spool; qk cplr, ride cntrl, high lift ............... $125,000 Deere 544J, 2005, 5040 hrs, ride cntrl, dual diff locks, 20.5 tires gen purp bkt ....... $75,900 Deere 644H, 1999, 16425 hrs, Cab w/o AC, frnt diff lock, 23.5 tires, gen purp bkt ... $69,500 Deere 624K, 2015, 1559 hrs, AC, qk cplr, dual diff lock, 20.5 tires, gen purp bkt ... $159,000 Deere 624H, 2002, 10989 hrs, Cab w/o AC, ride cntrl, dual diff locks, gen purp bkt .. $45,900 Deere 644C, 1984, 0 hrs, Cab w/o AC, 20.5 tires; gen. purpose bucket ................. $15,500 Deere 644G, 1995, 18541 hrs, AC, ride cntrl, frnt diff lock, 26.5 tires, gen purp bkt .. $29,500

Contact John Reinen (used equipment manager) at 608-220-1723 or Lewis at 608-837-5141 ext.1019

For Photos & Detail Descriptions visit: www.brookstractor.com Six Locations in Wisconsin to serve you - Sun Prairie z Milwaukee De Pere z West Salem z Plover z Mt. Pleasant (OPENING SOON)

Page 32 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

John Deere 400D Articulated Truck, 1:50 Scale - $50

White Beavertail Trailer, 1:50 Scale - $60

Red Beavertail Trailer, 1:50 Scale - $60

Komatsu WH613 Telehandler, 1:50 Scale - $65

International TD-25 Dozer w/Umbrella, 1:50 Scale - $70

Caterpillar 140H Motor Grader, 1:50 Scale - $75

Caterpillar 432E Backhoe/Loader, 1:50 Scale - $90

Caterpillar 365C L Front Shovel, 1:50 Scale - $90

Komatsu WA500 Wheel Loader, 1:50 Scale - $90

JCB 467 WLS Articulated Front End Loader, 1:50 Scale - $110

Volvo L90G Wheel Loader, 1:50 Scale - $120

Peterbilt 367 Orange Dump Truck, 1:50 Scale - $120

Mack Granite Silver/Black Dump Truck, 1:50 Scale - $120

Komatsu WA380 Wheel Loader, 1:50 Scale - $135

Vogele MT3000-2i Power Feeder, 1:50 Scale - $140

Caterpillar 390F Excavator, 1:50 Scale - $175

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Email – bmckeon@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 33

1.866.643.1010 ClearSpan Span.com/ADCEGMW

WE MANUFACTURE t WE INSTALL WE SAV VE YO OU MONEY B U I L D I N G S O F 1,000 U S E S

2841 Verona Rd. • Verona, KY 41092 (859) 485-8500 • Fax: (859) 485-8573 www.newmantractor.com

Fabric Structures

Hybrid Buildings uildings

Foundation Solutions

ZERO PERCENT FINANCINGG AAVVAILABLE

RESTRICTIONS MAY APP LY

WHY BUY REBUILT, WHEN YOU CAN BUY REMANUFACTURED TO ORIGINAL DEUTZ FACTORY STANDARDS. Q

We are so confident about the quality of DEUTZ Xchange engines that we offer a national three-year limited, fully transferrable warranty.

DEUTZ Xchange engines are assembled with 100% genuine DEUTZ replacement parts and undergo a 300-point reconditioning process, which includes all the latest engineering advancements.

DEUTZ Xchange provides a no-hassle core return policy, and speedy delivery.

DEUTZ Xchange engines are available for the following:

914 Series

1011/2011 Series

1015/2015 Series

912/913/914 Series

413/511/513 Series

1012/1013 Series

2.9/3.6 short & long blocks

2012/2013 Series

Your source for DEUTZ Xchange engines across the Midwest.

DEUTZ Power Center

Page 34 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

U.S. Army Places $142M New Year Order for JCB Machines JCB has started 2017 by winning one of the biggest single orders in its 71-year history — a $142-million deal to supply the United States Army with a massive fleet of machines. The company announced that the U.S Army is to take delivery of more than 1,600 light-capability rough terrain forklifts for deployment on tasks around the world including loading and unloading aircraft and shipping containers. The new 527-58M forklift is engineered from JCB’s range of commercial Loadall telescopic handlers — a machine which this year celebrates 40 years in production and which is the biggest-selling product of its kind in the world. JCB CEO Graeme Macdonald said: “This order is fantastic news for JCB and a great way to start the New Year. It is the second-highestvalue order in the company’s history, and I congratulate everyone who has worked to secure this valuable contract in the same year that we mark 40 years of telescopic handler production.” The largest single deal in JCB’s history also came from the U.S. Employees at JCB’s North American HQ celebrate news of the $142million U.S. Army order.

At 80 in. (203 cm) wide and 78 in. (198 cm) high, the military spec 527-58M is optimized to work in confined spaces.

Army in 2005 when a $206-million order was placed to produce hundreds of high-speed military versions of JCB’s famous backhoe loader. That machine, the high mobility engineer excavator (HMEE), is capable of speeds of up to 60 mph and went on to be sold to allied forces around the world, including the UK, Sweden, Germany, Australia and New Zealand. Like the HMEE, the new 52758M light-capability rough-terrain forklifts will be produced at JCB’s North American Headquarters in Savannah, Ga. They will be powered by the 84 hp (63 kW) JCB DieselMax engine produced at JCB Power Systems in Derbyshire, UK. At 80 in. (203 cm) wide and 78 in. (198 cm) high, the military spec 527-58M is optimized to work in confined spaces. With a travel speed of 20 mph (33 kmh), the machine has a maximum lift capacity of more than 5,000 lbs. (2,268 kg) and a lift height of 19 ft.

(5.8 m). The 527-58M has been marinized to meet the operational needs of the services during wading and fording. Arjun Mirdha, CEO and president of JCB North America, said: “We are proud that the U.S. Army has once again chosen JCB and its Savannah-based manufacturing facility to produce an extraordinary piece of specialized equipment. Over the past three decades, JCB has supplied more than 4,000 machines to armed forces in 57 countries, and we have acquired a deep understanding of how the Army uses equipment and the unique features needed.” Chris Giorgianni, JCB North America’s vice president — product support and Government & Defense, said: “JCB now offers more than 300 ‘commercial offthe-shelf’ [COTS] solutions for the military. Being chosen to produce this military-specific forklift builds on the broad range of JCB products that can be modified to meet see ARMY page 42

SECTION

Attachments Pages 35-38

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Virnig Manufacturing V50 Clears Dense Brush, Trees

The Virnig V50 open front brush cutter, is designed to rough-cut dense brush and clear trees up to 4 in. (10 cm) in diameter.

Virnig Manufacturing Inc.’s brush cutter attachment, the Virnig V50 open front brush cutter, is designed to rough-cut dense brush and clear trees up to 4 in. (10 cm) in diameter. The three-blade cutting system, mounted to a flywheel ensuring flywheel bounces off stumps rather than catching and damaging the motor. This skid steer brush cutter also features: • Standard dual hydraulic pressure relief valves with dynamic braking to stop the 250 to 275 lb. flywheel in under 10 seconds. • Two standard flow and two high flow Eaton motor configurations ensure optimum performance and longevity. • Tall push bar at the front provides rigidity and helps push over thick brush and trees. • Able to cut down to the ground to limit regrowth.

• Double-sided, 5/8 by 5 in. (1.5 by 12.7 cm) blades can be flipped over to utilize second sharpened edges. • Standard replaceable front skid shoes to increase the mower deck’s wear life. Available in 60 to 78 in. (152 to 198 cm) cut widths with a recommended flow rate of 14 to 42 gpm (53 to 159 Lpm). All Virnig products are backed by a oneyear warranty, and the skid steer attachments are USA made and built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson and others. For more information, call 800/648-2408 or visit virnigmfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Owner Hits the Road to Demo Black Splitter Attachments Eric Ransome, owner of Atlantic Excavator Attachments, has taken to the road to demonstrate how his Black Splitter log splitter attachments can optimize firewood processing, wood chipping and mulch processing operations. He has been traversing the Mid-Atlantic region conducting free onsite demonstrations to accomplish the mission. Ransome embarked on this campaign after recognizing that previous onsite demonstrations successfully conveyed the transformative power of this log splitter attachment. His goal is to showcase the Black Splitter’s ability to handle and split large timber with a single operator while reducing the manpower and costs associated with traditional operations. While most of Atlantic’s customers mount the cone splitter on various sized excavators, Ransome acquired the Vermeer S725TX miniskid steer for its cost-efficiency, transportability, and diverse functionality. He purchased the compact workhorse in August 2016 from Lumberton, N.J.-based Vermeer North Atlantic. “The combination of the Vermeer S725TX and the Black Splitter has the ability to revolutionize firewood processing, wood chipping, and mulching operations by effortlessly handling and breaking down back-breaking big rounds,” Ransome said. “This impressive team will even split logs that cannot be processed by expensive firewood processors.” For more information, visit blacksplitternj.com/videos/. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Eric Ransome demonstrates the Black Splitter mounted on a Vermeer S725TX mini-skid steer at a recent onsite demonstration.

Page 36 • January 14, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Pipe Pallet Fork Features NitroSteel Cylinder Rods Virnig Manufacturing Inc.’s V60 four-cylinder pipe pallet fork grapple is designed to apply consistent pressure to secure long pipe over uneven terrain. The main arms move first while smaller, secondary arms move after the main arm cylinders are fully extended. The 54 in. (137 cm) wide frame helps keep long material stable. Also features: • Corrosion, dent and flake resistant NitroSteel cylinder rods made in the USA. • Standard Cascade ITA Class II forged tines rated at 6,200 lbs. • Machine specific hydraulic package to completely protect hose routing. All Virnig products are backed by a one-year warranty, and the skid steer attachments are USA made and built with a universal mount to fit most skid steer loaders including: Bobcat, Caterpillar, ASV, Case, Daewoo, Gehl, JCB, John Deere, Kubota, Mustang, New Holland, Takeuchi, Terex, Volvo, Wacker-Neuson and others. For more information, call 800/648-2408 or visit virnigmfg.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Virnig Manufacturing’s V60 four-cylinder pipe pallet fork grapple is designed to apply consistent pressure to secure long pipe over uneven terrain.

Digga Cement Mixer Proves Ideal for Many Applications Digga’s cement mixer can mix anything from cement to fertilizer. In addition, it will attach quickly and easily to Digga’s current line of auger drives and is capable of attaching to skid steer loaders, front-end loaders and telehandlers. The mixer has a maximum operating capacity of 30 gal. / 4 cu. ft. (113.5 L / .1 cu m), and also is available in a smaller 18.5 gal / 2.5 cu. ft. (70 L / .07 cu m) option. Features include: • Easy Connection. Simply pin cradle to existing auger frame and add mixer bowl. Change from drilling to mixing in under 2 minutes. • Also available for mini loaders and walk-behind units. • Maintenance free • Also can be used for mulch, animal feed and fertilizer. For more information, call 563/875-7915 or visit www.diggausa.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Digga’s cement mixer will attach quickly and easily to Digga’s current line of auger drives and is capable of attaching to skid steer loaders, frontend loaders and telehandlers.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • January 14, 2017 • Page 37

www.zieglercat.com

5426 Hwy 71 North Bemidji, MN 56601 218-751-1033 • 866-634-9983 3311 Liberty Lane Brainerd, MN 56401 218-829-9800 • 877-829-9850 Fax : 218-833-8530 10081 East Hwy 169 Buhl, MN 55713 218-258-3232 • 800-446-9795 Fax : 218-258-3224 13822 West Freeway Drive Columbus, MN 55038-9705 651-982-5600 • 866-982-5656 Fax : 651-982-5650 720 3rd Ave SW Crookston, MN 56716-0538 218-281-4245 • 800-422-5782 Fax : 218-281-3852 210 Garfield Ave Duluth, MN 55802-2696 218-722-6628 • 800-421-3831 Fax : 218-722-0307 3502 State Hwy 210 West Fergus Falls, MN 56537-4003 218-736-2680 • 800-346-7649 Fax : 218-736-2625 191 Industrial Parkway Jackson, MN 56143 507-847-7600 • 866-847-6401 Fax : 507-847-7610 2145 Howard Drive West Mankato, MN 56003 507-388-1444 • 877-845-3938 Fax : 507-388-5909 1200 North Hwy 59 Marshall, MN 56258-2761 507-532-4403 • 800-325-4929 Fax : 507-537-1519 901 West 94th Street Minneapolis, MN 55420-4236 952-888-4121 • 800-352-2812 6340 Hwy 63 South Rochester, MN 55904-8414 507-285-1775 • 800-247-1068 Fax : 507-536-5001 8000 County Road 101 East Shakopee, MN 55379-9734 952-887-4570 • 800-352-2812 2225 255th Street St. Cloud, MN 56301-8742 320-253-2234 • 800-522-9469 Fax : 320-253-2187 2987 Hwy 12 West Willmar, MN 56201-9743 320-235-0614 • 844-276-6736 Fax : 320-235-0955 1500 Ziegler Drive NW Altoona, IA 50009-7200 515-957-3800 • 800-342-7002 951 Park Drive Atlantic, IA 50022 712-243-1039 • 877-547-3819 Fax : 712-243-1099 3366 5th Ave South Fort Dodge, IA 50501-6428 515-576-3161 • 800-342-1848 Fax : 515-576-7564 11490 265th Street Mason City, IA 50401-9656 641-423-7240 • 800-342-1849 Fax : 641-423-8106 308 North Lawler Postville, IA 52162-7802 563-864-7461 • 800-526-0889 Fax : 563-864-7463 102 Crossroads Drive Sheldon, IA 51201 712-324-5604 • 855-344-5604 5300 Harbor Drive Sioux City, IA 51111-1114 712-252-4401 • 800-342-1847 Fax: 712-252-4830

www.lanoequip.com

www.rdoequipment.com

6140 Highway 10 NW Anoka, MN 55303 763-323-1720 • 888-448-5266 Fax: 763-422-3949

12500 DuPont Avenue South Burnsville, MN 55337 952-890-8880 800-950-3298

6700 Highway 10 Northwest Sauk Rapids, MN 56379 320-259-6222 800-950-4803

6565 Gateway Drive Grand Forks, ND 58201 701-772-4842 800-726-5383

2801 North Louise Sioux Falls, SD 57107 605-336-2730 800-388-2730

3021 West 133rd Street Shakopee, MN 55379 952-445-6310 • 877-753-6100 Fax: 952-496-0263

1236 60th Avenue NW Rochester, MN 55901 507-282-8888 800-950-4795

2900 Main Avenue SE Moorhead, MN 56560 701-526-2200 800-726-5386

6320 Highway 2 East Minot, ND 58701 701-852-3962 800-726-3186

1540 Deadwood Avenue Rapid City, SD 57702 605-348-1566 800-658-4590

23580 Highway 55 Loretto, MN 55357 763-479-8200 • 888-479-4342 Fax: 763-479-8201

1910 LorRay Drive North Mankato. MN 56003 507-387-1836 800-950-7055

2000 Industrial Drive Bismarck, ND 58502 701-223-5798 800-726-5391

14057 49th St. NW Williston, ND 58801 701-577-0736 877-631-7874

1710 East College Drive Marshall, MN 56258 507-532-0994 800-934-3923

11105 33rd Street SW Dickinson, ND 58601 701-483-0115 855-740-9652

4935 6th Avenue SE Aberdeen, SD 57401 605-225-6772 800-843-1865

Page 38 • January 14, 2017 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Visit us at ConExpo in Booth G3749 (gold lot)

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 39

DOOSAN. AN POWERFUL W SOLUTIONS. UTIONS At Doosan, we do more than engineer products. We engineer solutions. Robust compressors that weather her the harshest conditions. Generators and light towers that match innovation with efficiency. Unrivaled service and support, day or night. That’s a the way we’ve operated for over 100 years, and the way we’ll do business for dec d ades to come.

AIR COMPRESSORS / GENERATORS / LIGHT TOWERS Aspen Equipment Co. www.aspenequipment.com 9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525 Omaha, NE (402) 894-9300

McAllister Equipment Co.

Roland Machinery Co.

www.mcallisterequipment.com 150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 Alsip/Chicago, IL (708) 389-7700 E. Peoria, IL (309) 694-4455 Rockford, IL (815) 227-0555 Springfield, IL (217) 789-0351

www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399

DoosanPortablePower.com | 800.633.5206

East Peoria, IL (309) 694-3764 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151 Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710

Schofield, WI (715) 355-9898 Escanaba, MI (906) 786-6920

Central Power Systems & Services www.cpower.com 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231 Great Bend, KS (620) 792-1361

Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

Page 40 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

The ZX380LC-6 began work on the Titletown District in May of 2016.

Phase One of Titletown District Development Consists of 21 Acres

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677 Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461

DENOBLE from page 24

“The 470 is a nice machine,” Kaster added. “It’s got a lot of power and it’s smooth.” Targeted completion for Phase 1 is set for fall 2017 and planning and construction for the development is ongoing. Joe said his excavators, paired with his crew, proved to be game changers for his portion of the project. “We’re very fortunate that the equipment we have is Hitachi,” he said. “We’ve had no breakdowns. Our part of Phase 1 was projected to take 4 ½ months, and we completed it in 2½ months, so two months early. We’re very proud of the work we’ve done.” The Secret to Staying Orange Joe DeNoble Sewer & Water has partnered with Hitachi dealer Brooks Tractor since its beginning. “We have a good relationship with Brooks Tractor, our equipment company in De Pere,” Joe said. “They’re great people, and when we need something, they’re there.” Joe takes pride in his equipment and has a secret for keeping his machines

“We’re very fortunate that the equipment we have is Hitachi. We’ve had no breakdowns.” www.brookstractor.com

Joe DeNoble DeNoble Sewer & Water

bright orange. “When we buy them brand new, we bring them into the yard and we actually wax the machines with airplane wax,” he said. “It keeps the machines looking good and orange.” Of course, what’s under the hood is just as important to Joe as the excavators’ exterior. “Hitachi is very reliable, and I like the Isuzu engines,” he said. “They’re very dependable, strong-running, longlasting, and the fuel economy is just remarkable.” Joe purchased the Hitachi veteran of his current fleet, the ZX160LC-3, in 2009 and it has more than 7,000 hours on it. “Hitachi excavators are fuel-efficient, they’re smooth and they’re fast,”

he said. “We’ve tried other equipment, and we’ve always come back to Hitachi — just an all-around good piece of equipment.” When it comes to Joe, his family, his business and his equipment, it’s all good. “Every day is a new day in commercial/industrial construction,” he said. “It’s always interesting, never boring. We’re on different sites a lot. I meet good people; I have a good team. Good family. I’m not tired of it; everything is good.” This story was reprinted with permission from Hitachi’s Breakout Magazine, Winter 2016 issue.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Sun Prairie, WI 608/837-5141 Milwaukee, WI 414/462-9790 De Pere, WI 920/336-5711 West Salem, WI 608/786-2644 Plover, WI 715-254-2777 Opening Soon! Mt. Pleasant, WI

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ January 14, 2017 â€¢ Page 41

PRODU UCTIVIT Y POWERHOUSE. Powered by our 6 6.8L EPA Final Tier 4 (FT4 T4)//EU Stage IV diesel engine, tthe 850K Crawler Dozer picks up the pacee when it comes to productivity. Designed to work justt as smart as you work hard, it comes paacked with detail-oriented features that help you get in n, out, and on to the next job. Our purrpose-built mainframes optimize blade ratio and center of gravity for superior balance. So whetther yyou opt p for a ppower/anggle/tilt (PAT AT) or an outside--mount straight g or VHPL 8 EODGH \RXÅ¤OO ZDWFK SURÆ&#x;WDELOLW\ VKDSHH XS ULJKW EHIRUH \RXU H\HV

www.nortrax.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 800/472-7202 Monico, WI 715/487-5583 Mosinee, WI 715/693-3820 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

Page 42 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

John Deere Ups Power Range for PowerTech 4.5L DOC/SCR Engine John Deere Power Systems announced the latest addition to its lineup of Final Tier IV industrial engines, the PowerTech PSL 4.5L engine. Engineered by John Deere to meet the needs of OEM customers, the PowerTech PSL 4.5L with variable speed ratings is equipped with an integrated emissions control system consisting of cooled exhaust gas recirculation (EGR), a diesel oxidation catalyst (DOC) and a selective catalytic reduction (SCR) system. “We continue to enhance our Final Tier IV engine lineup. With the introduction of the PowerTech PSL 4.5L engine, we’re offering a common technology solution across our entire 4.5L power range from 63 to 129 kW,” said Darrin Treptow, manager, worldwide marketing of John Deere Power Systems. “The PowerTech PSL 4.5L delivers more power density and improved low-speed torque, while leveraging

combustion optimization that eliminates the need for a DPF.” John Deere designed the integrated emissions control system for the PowerTech PSL and previously announced PWL 4.5L engine platforms to balance performance and operating requirements. The PowerTech PWL and PSL 4.5L engines complement the Final Tier IV PSS 4.5L engine equipped with a DPF, providing OEMs with greater application flexibility. The new PowerTech PSL engine without a DPF is available with power ratings from 125 to 173 hp (93 to 129 kW). The existing PowerTech PWL 4.5L engine with DOC/SCR aftertreatment delivers 85 to 140 hp (63 to 104 kW ). For more information, visit www.JohnDeere.com/jdpower. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Engineered by John Deere to meet the needs of OEM customers, the PowerTech PSL 4.5L with variable speed ratings is equipped with an integrated emissions control system consisting of cooled exhaust gas recirculation (EGR), a diesel oxidation catalyst (DOC) and a selective catalytic reduction (SCR) system.

JCB Forklifts Work in Tight Spaces

The new 527-58M light-capability rough-terrain forklifts for the U.S. Army will be produced at JCB’s North American Headquarters in Savannah, Ga. ARMY from page 34

the most gruelling military conditions. “The 527-58M is designed to minimize military operational costs with a two-year service warranty and extended service intervals with parts available from distribution centers in JCB’s worldwide network, making it faster

and more efficient for the U.S. Army to maintain and service the new forklifts.” With nearly one of every three telescopic handlers sold globally being produced by JCB, the U.S. Army will benefit from a leading commercial design and associated cost and operational efficiencies. Just as the JCBbuilt and supplied HMEE revolution-

ized how the military tackled engineering tasks, the new JCB light-capability rough terrain forklift is designed to improve military logistics capabilities. For more information, visit www.jcb.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

KENTUCKY Diamond Equipment www.diamondequipment.com Bowling Green 270-781-1061

OHIO CAT www.OhioCAT.com Richwood 888-446-4658

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770

OHIO OHIO CAT www.OhioCAT.com Broadview Heights 800-837-6200 Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental) Oakwood Village 800-633-1020

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 43

ILLINOIS DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273

WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville 630-355-7150 Rockdale 815-730-9011 Rockford 815-961-3160 South Holland 708-331-6362 Wauconda 847-526-7700

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

Now Available with Tier 4 Final

Page 44 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Work Truck Show 2017⁄

NTEA Adds Sessions on Recruiting, Retaining Millennial Employees Learn how to attract and retain young employees with new sessions just added to the educational lineup at The Work Truck Show 2017. Millennials, now the majority generation in the U.S. workforce, are stimulating new thinking in diversity, transparency, collaboration, flexible work and positive social atmospheres. The Special Session “What the Industry Needs to Know About Recruiting & Keeping Millennials … From Millennials” will address corporate challenges and opportunities of finding and retaining skilled young talent. The concurrent session “Becoming an Employer of Choice — Three Strategies for Creating Your Competitive Advantage,” will explore why nearly half of all employed millennials plan to change jobs in the coming year and what engagement strategies organizations can use to set themselves apart from other local employers. These sessions are two examples of how NTEA — The Association for the Work Truck Industry is working to help attract and grow the next generation of professionals to the $150 billion work truck industry. The concurrent “Employer of Choice” session is held March 16, from 9:30 to 10:45 a.m. It’s presented by Amy Hirsh Robinson, principal of Interchange Group. The Special Session on “Recruiting & Keeping Millennials” is held March 16, from 1:30 to 2:45 p.m. The Work Truck Show, produced by NTEA, runs March 14 to 17 at the Indiana Convention Center in Indianapolis, Indiana. Educational sessions begin March 14, and the exhibit hall is open March 15 to 17. For millennials already working for NTEA members, the association offers Generation Next. For people relatively new to the vocational truck industry, it provides the opportunity to network with peers and ask questions pertaining to their career paths. It’s run by an elected board of governors, and puts on several events and panels during the year to share experiences and challenges. Through Generation Next, an evolution of the Young Executives Network founded in 1996, NTEA continues its long-standing efforts to attract, engage and foster young talent in the industry. At The Work Truck Show 2017, the group is hosting the Generation Next Leadership Workshop and Networking Reception: The Rules of Engagement on March 15, from 3 to 5 p.m. The presenter, chosen by the group, is Josh Schneider, director of the Millennial and Employee Engagement Institute. “Generation Next is a great opportunity to help members engage their new and upcoming people — the future of their companies — by helping them gain a broader perspective of the industry beyond just the function of their job, and get excited about the future of their careers,” said Derek Eng, director of information technology at NTEA, and liaison with Generation Next. “It’s a two-way street. Young people develop connections and resources they can use when encountering new challenges or needing to know more about an unfamiliar subject or discipline. At the same time, our

involvement with this group has given the association greater insights into the needs and perspectives of each incoming generation.” Members of Generation Next will participate in a panel discussion during the Special Session “What the Industry Needs to Know About Recruiting & Keeping Millennials… From Millennials.” They’ll discuss their experiences, attitudes and work expectations, while considering what companies must do to become employers of choice in the new economy. The session will be moderated by Amy Hirsh Robinson, principal at the Interchange Group. Meeting the Work Truck Industry Exposing students to The Work Truck Show is a great way to get them interested in a career in the work truck industry. It’s the perfect venue for interested young people to see firsthand the scope of the commercial truck industry. “We represent an industry whose workforce is aging, so attracting a younger generation is a vital mission for our members,” said Bob Miller, NTEA director of outreach. “I visit the workplaces of nearly 200 members a year, and about 85 percent of them tell me one of the biggest challenges they face is finding and keeping new people. So as an Association, our challenge is get young people interested in the industry, and keep them engaged once they become part of it.” Last year, more than 275 students attended The Work Truck Show, including four from Escondido High School in California who were accompanied by their automotive technology instructor, Tim Latulippe. He had been to the show before, and it was an eye-opening experience for him. “I was blown away the first time I experienced the scope of The Work Truck Show, and I knew these guys would be just like me,” Latulippe said. “I wanted them to understand how big this [industry] is, and that with the proper training, they can go just about anywhere in the world and have the opportunity to be gainfully employed and do a good thing for themselves and their families.” Named one of the top 100 trade shows in the United States, The Work Truck Show features the newest vocational trucks, vans, vehicle components and equipment from more than 500 exhibitors on an exhibit floor covering more than 500,000 sq. ft. Registration for The Work Truck Show 2017 is available at worktruckshow.com. The Special Session “What the Industry Needs to Know About Recruiting & Keeping Millennials … From Millennials” is not included in any registration package, and a ticket must be purchased separately. The concurrent session “Becoming an Employer of Choice — Three Strategies for Creating Your Competitive Advantage,” is available through the Conference & Trade Show Package.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

Every Komatsu Tier 4 construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges. With Komatsu CARE you can: • Lower your cost of ownership • Increase equipment uptime and reliability • Protect the value of your Tier 4 capital investment

It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers. To learn more about Komatsu CARE contact your Komatsu distributor or scan this QR code with your smart phone.

MIDWEST KOMATSU DISTRIBUTORS

Berry Tractor & Equipment www.berrytractor.com KS Garden City 620-277-2290 • 877-469-1763 Topeka 785-266-9509 • 877-469-1763 Wichita 316-943-4246 • 877-469-1763 MO Springfield 417-831-2651 • 877-469-1763

Brandeis Machinery & Supply Company www.brandeismachinery.com IN Evansville 812-425-4491 Ft. Wayne 260-489-4551 Indianapolis 317-872-8410 KY Corbin 606-528-3700 Lexington 859-259-3456 Louisville 502-491-4000 Paducah 270-444-8390 Stanville 606-478-9201

Columbus Equipment Company www.columbusequipment.com OH Cadiz 740-942-8871 Cincinnati 513-771-3922 Columbus 614-443-6541 Dayton 937-879-3154 Massillon 330-833-2420 Painesville 440-352-0452 Perrysburg 419-872-7101 Piketon 740-289-3757 Richfield 330-659-6681 Zanesville 740-455-4036

Continental Equipment Corp. www.ceceq.com MI Lansing 517-321-8000 MI - Continental Equipment Corp. Service Branches Bridgeport 989-777-0090 • 989-777-1583 Lenox 586-727-7502 • 586-727-7311 New Hudson 248-437-8121 • 248-437-9750 Williamsburg 231-267-5060 • 231-267-5257

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ January 14, 2017 â€¢ Page 45

Diesel Machinery, Inc. www.dieselmachinery.com SD Aberdeen 605-725-4364 â€¢ 888-762-6312 Rapid City 605-348-7438 â€¢ 800-658-3047 Sioux Falls 605-336-0411 â€¢ 800-456-4005

General Equipment & Supplies www.genequip.com ND Bismarck 701-223-9700 â€¢ 800-279-4437 Fargo 701-282-2662 â€¢ 800-437-2924 Minot 701-852-0479 â€¢ 800-852-0479 Williston 701-572-0570

INTELLIGENT MACHINE ACHINE CONTROL t 'JSTU UP MBTU QBTT HSBEJOH UFDIOPMPHZ t 3FWPMVUJPOBSZ USBDL TMJQ DPOUSPM t &YUFSOBM TUSPLF TFOTJOH IZESBVMJD DZMJOEFST t /FX 5JFS 'JOBM UFDIOPMPHZ

Road Builders Machinery & Supply Co., Inc. www.roadbuildersmachinery.com KS Kansas City 913-371-3822 NE Grand Island 308-384-2620 Lincoln 402-325-0447 Omaha 402-331-9200

Road Machinery & Supplies Co. www.rmsequipment.com IA Cedar Rapids 319-363-9655 â€¢ 800-616-6615 Des Moines 515-282-0404 â€¢ 800-555-1445 Sioux City 712-252-0538 â€¢ 800-633-9104 IL Milan 309-787-1742 â€¢ 800-633-9114 MN Duluth 218-727-8611 Savage 952-895-9595 â€¢ 800-888-9515 Virginia 218-741-9011 â€¢ 800-752-4304

Roland Machinery Co. www.rolandmachinery.com IL Bolingbrook 630-739-7474 Carterville 618-985-3399 Marengo 815-923-4966 Springfield 217-789-7711 IN Portage 219-764-8080 MI Escanaba 906-786-6920 MO Bridgeton 314-291-1330 Cape Girardeau 573-334-5252 Columbia 573-814-0083 Palmyra 573-769-2056 WI DeForest 608-842-4151 DePere 920-532-0165 Eau Claire 715-874-5400 Franksville 262-835-2710 Schofield 715-355-9898

www.komatsuamerica.com/komatsu-care

PN mOBODJOH UP QSPEVDU RVBMJUZ UP TVQQPSU BOE USBJOJOH BGUFS UIF TBMF ,PNBUTV WFST FWFSZUIJOH NZ DVTUPNFST EFNBOE * WF CFFO TFMMJOH UIFJS GVMM MJOF JODMVEJOH F 19J BOE &9J TFSJFT EP[FST GPS ZFBST *OOPWBUJPO BOE UIF FYDMVTJWF JOUFMMJHFOU BDIJOF $POUSPM TFU UIFN BQBSU GSPN UIF PUIFST "OE UIBU T XIZ * ". ,0."546 w

PPORTED WITH PRIDE IDE

Page 46 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NORTH DAKOTA

ILLIN NOIS

KANSAS

OHIO O

KENTUCKY

OKLAHO OMA

INDIIANA

IOWA

MISSOURI

MICHIGAN

MINNESOTA

WISCONSIN

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 47

WE TESTED THE LATEST MACHINES TO FIND EVERY POSSIBLE ADVANTAGE. THE PROOF IS IN THE PERFORMANCE. SEE THE RESULTS.

We tested the new M2-Series compact track loader from Bobcat against a variety of comparable machines in our latest Bobcat Advantage® video series. Which machine delivers more hydraulic power while multifunctioning? Watch our test and see for yourself.

Put a Bobcat loader to the test at your local dealership. Bobcat.com/CTLAdvantage Bobcat is a Doosan company. Doosan is a global leader in construction equipment, power and water solutions, engines, and engineering, proudly serving customers and communities for more than a century. Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2017 Bobcat Company. All rights reserved. | 53663-4

Page 48 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AISED RM RA FAR

S I N C E 1 965

STAR EQUIPMENT LT D .

STAR EQUIPMENT LTD. 1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 FAX: (515) 283-0295 (800) 369-2215 2625 W. AIRLINE HWY. WATERLOO, IA 50703 (319) 236-6830 FAX: (319) 236-6834 (800) 791-9249 2950 6TH STREET SW CEDAR RAPIDS, IA 52404 (319) 365-5139 FAX: (319) 365-6726 (800) 728-5139 2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 FAX: (515) 233-9505 (866) 856-2312 WWW.STAREQUIP.COM

STOP OU UT TO SEE US A AT T: T: NA ATION TIONAL F FARM AR RM MACHINER MA RY Y SHOW FEB 15-18,, 2017 BOOTH #624 49

PUSHING G THE LIMITS OF AGRIBUS SINESS PERFORMANCE E Mustang skid steer loaders come read ady to work with the right powe er needed to tackle the biggest tasks. Building its first skiid-steer in 1965, Mustang loader oaders have pushed the limits of durability y,, setting new in ndustry standards.

G E N U I N E

™

P A R T S

CALL L YOUR AREA A MUSTA ANG DEALER TODAY! Y REED COMPANY, LLC 2738 FAUNA ROAD LEBO, KS 66856 (620) 256-6609 FAX: (620) 256-0288

JUNCTION US 24 & 99 HWY WAMEGO, KS 66547 (785) 456-7333 FAX: (785) 456-6714

WWW.REEDSALES.COM

TOP NOTCH EQUIPMENT, INC. 5505 HIGHWAY 169 N. PLYMOUTH, MN 55442 (888) 824-6559 (763) 398-0079 FAX: (763) 551-7916 WWW.TOPNOTCHEQUIPMENT.COM

www.m mustangmfg. com

Pages 49-63

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Sennebogen Acts as Cornerstone of Recycling Effort Being environmentally friendly takes on multiple meanings for the crew at Remo Recycling AG. Since mid-2015, a Sennebogen 821 electric material handler has been a cornerstone of that ongoing effort. As part of parent company Hurni AG’s corporate standards, the Remo Recycling AG mantra is to recycle and dispose of construction and municipal waste in the most ecologically responsible manner. A unique location offers an additional motivation to use a material handler that works quietly and efficiently with its 90 kW electric motor. “Due to the proximity to existing housing developments, a main focus of our procurement criteria was on minimizing noise pollution and avoiding emissions,” explained Heinz Gstrein, Remo operations manager. “This is optimally achieved by the environmentally-friendly electric motor. Not only does the machine work much more quietly, the electric solution also reduced the operating costs by around 70 percent.” With its crawler undercarriage, the Sennebogen 821 electric material handler moves along a special ramp at Remo’s Brienne facility, where it handles preliminary sorting and loading of incoming materials at a reach of 36 ft. (11 m). Rails guide movement of the tracks back and forth along the ramp. Working in an elevating maXCab industrial cab with bullet proof glass and an inclined windshield, the operator has an optimum view of the work area during sorting, Gstrein reported after more than 18 months of use. Equipped with a waste sorting grapple, the Sennebogen 821 can be supplied with electricity via a

The Sennebogen 821 electric material handler efficiently and quietly sorts and loads materials at the Remo Recycling AG facility in Brienne, Switzerland.

trailing cable. Due to the electric drive, not only are operating costs considerably reduced in comparison to conventional diesel-powered machines, said Gstrein, but the increased service life of all components and longer maintenance intervals also are notable. Last but not least, the “green image” of Sennebogen material handlers has been beneficial to the progressive reputation of the Brienne operation, which has been in the recycling business since 1987, said Gstrein.

“Everything from a single source,” is the motto of parent company Hurni AG, which offers earthworks and construction materials, in addition to demolition, material recycling and appropriate disposal. For more information on the full line of Sennebogen green line material handlers, visit www.sennebogen-na.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

A trailing cable supplies electric current to the Sennebogen 821 as it moves along a ramp handling waste material at the Remo Recycling AG facility. The specially-designed industrial maXCab features bullet-proof armored glass.

Page 50 • January 14, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

World of Concrete⁄

MB Crusher America to Present Crushing, Screening Demos Over the years, MB Crusher America Inc. has drawn crowds to its World of Concrete booth with its live crushing demonstrations. The company has featured attachments designed for excavators and loaders. This year, the company will be screening live for the first time at World of Concrete 2017. MB Crusher has expanded its product line to include a new line of screening attachments designed for skid loaders, loaders and backhoes. At its booth, #O30619, in the Silver Lot, MB plans to feature a MB-LS140 screening attachment along with its MB-L140 crusher attachment. “Our attachments are solutions. When you use our attachments, you will be saving the time it takes to process and transport materials. You can then begin to save money from any additional cost. This is the type of independence contrac-

“Our attachments are solutions. When you use our attachments, you will be saving the time it takes to process and transport materials.” Max Ravazzolo MB Crusher America

tors can gain,” said Max Ravazzolo, C.E.O. of MB Crusher America. “You work with your own materials. Down the line, you can generate new revenue for your company with the materials you create.” The MB-LS140 is the smallest unit in the MB-LS series. It is designed as a trommel screen for loaders and skid loaders weighing 5,700 pounds. It has a load capacity of 0.66 cu. yd. (.5 cu m) and a basket depth of 21 in. (53 cm). It is created with a cone-shaped basket

to increase production and allow contractors to quickly sift through material without residue. The MBLS140 can screen mixed materials, sift wet and dry materials, and clean superficial powder from natural stones. Similar to previous shows, MB will also be crushing concrete at a 6-in. (15 cm) minus with its MBL140 crusher bucket. The MBL140 is designed for skid loaders, loaders and backhoes. It has an adjustable output with a 29 in. (74

cm) wide by 10 in. (25 cm) high mouth opening, and has a load capacity of 0.3 cu. yd. (.23 cu m). It crushes hollow core walls, reinforced and non-reinforced concrete, natural stone and asphalt into reusable aggregate materials for base or fill. In addition to crushing and screening attachments, MB offers 360 degree rotation grapples and dual head rotary drum cutters for a wide scope of work, which includes demolition and excavation, road work, quarries, mining,

pipeline work and environmental reclamation projects. MB’s attachments use the hydraulic system on excavators, skid loaders and backhoes, and allow contractors the flexibility to work in tight areas, difficult access locations, steep slopes and urban areas. Contractors will be able to reuse materials immediately at the job site and provide a greener option in recycling waste materials. By reusing the materials, contractors and businesses can begin saving time and money in reducing waste and trucking costs. Visit Booth #O30619 in the Silver lot to see the crushing action and learn more about MB. For information, call 855/6227874 or visit www.mbamerica.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com)

Atlas Copco’s Bucket Crusher Offers Greater Versatility Atlas Copco Construction Equipment’s new generation of bucket crusher attachments offer higher output and greater reliability than previous models. The new bucket crushers — the BC 2500 and BC 3700 — process about 80 percent more material due to their hydraulic drive system. The BC 2500 fits 24- to 33-ton (21.7 to 30 t) carrier weight classes, and the BC 3700 fits 30- to 42-ton (27 to 38 t) carrier weight classes. “The new bucket crushers allow contractors to increase the versatility of carriers, especially on demolition, recycling and road construction applications,” said Rich Elliott, Atlas Copco product manager, hydraulic attachments. “The powerful drive systems and high reliability make them an ideal alternative to mobile jaw crushers for cramped worksites. Plus, they can process a wide range of materials, including aggregate, asphalt and concrete.” The attachments feature powerful components that allow carrier operators to crush as much as 110 tons of material per hour. The drive system — two hydraulic motors and a timing belt — generates the high torque needed for powering the crushing jaw. The attachments also feature a reverse function to easily remove any blockage by pushing material back through the inlet. Crushing material on site allows contractors to save on transportation costs to a landfill or processing center since they can fit more material in each truck load. They also can reuse the crushed material on site as backfill, which reduces the costs associated with hauling in material. Atlas Copco designed the attachments for high reliability and maximum uptime in challenging worksite conditions. For example, Atlas Copco’s internally mounted drive system eliminates protruding components to minimize the risk of dust entering the hydraulic system and to protect key components from flying debris. Additionally, operators can control the diameter of the crushed materials by easily adjusting the jaw outlet without any special tools. This keeps set-up times to a minimum and allows operators to create varying material sizes. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2017 • Page 51

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

Metso’s Lokotrack® LT106™ jaw crusher: Meeting your demands for high capacity with maximum efficiency That’s how we make the big difference, the Metso Way. Improve the efficiency and profitability of your crushing operation with the redesigned Lokotrack® LT106™ jaw plant. New features, including a radial side conveyor, high inertia flywheels, and an IC700™ process control system, ensure high productivity, user-friendly operation, and good mobility in tough crushing applications. The LT106 is also available with Metso’s Fleet Management technology, providing remote monitoring of functions, parameters, and location for more efficient operation.

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

Find out more about profitable crushing at metso.com/showroom/aggregates #TheMetsoWay

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200

5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

Page 52 • January 14, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Fuchs MHL390 F Delivers With Long Reach Capacity Purpose built to deliver the long reach and high lift capacities required in port and high production scrap handling applications, the new heavy duty Fuchs MHL390 F material handler unseats the MHL380 handler as the largest and most productive machine in the Fuchs product line. With standard operating weights ranging from 167,990 to 191,000 lb. (76,200 to 86,636 kg), this new market standard for high capacity handling offers up to a 72.2-ft. (22 m) reach for large scrap yards and up to a 80.4-ft. (24.5 m) reach, with a banana boom configuration, to efficiently reach deep into a vessel’s hull in port applications. Whether moving coal, grain, logs, scrap or big bags, a variety of attachments can be effortlessly exchanged via a quick-attach coupling for fast and efficient material handling. Optional float operation automatically lifts the boom if too much pressure is applied, protecting sensitive surfaces from damage. The new handler also can be equipped with an overload warning system with height and reach limiter to more efficiently handle heavy loads. With its standard dual solid rubber tire drive, the massive undercarriage of the mobile MHL390 F material handler spreads machine weight over a broad 20.6- by 24.2ft. (6.3 by 7.4 m) area with its four-point outriggers to provide excellent stability when lifting heavy loads at extended reach. Oversized 34.2- by 29.5-in. (86 by 75 cm) stabilizer pads distribute the machine’s weight over a contact area 91 percent larger than the MHL380 handler’s pads, boosting stability while reducing ground contact pressure. Its robust four-wheel hydrostatic drive system enables the handler to travel docks at speeds reaching 5.0 mph (8 kmh), and the machine offers a 32.5-ft. (9.9 m) turning radius to navigate around obstacles. A 6-cylinder turbocharged diesel engine develops 402 hp (300 kW) output to power the new MHL390 F handler. Boasting double selective catalytic reduction (SCR) modules, this material handler does not require a diesel particulate filter (DPF) commonly found on Tier IV Final engines. This eliminates the need for passive filter regeneration and ensures uninterrupted material handler operation with lower fuel consumption. Separate hydraulically driven fans for oil, water and intercooler feature automatic fan speed control to continuously maintain optimum operating temperatures, even in extreme heat, while an available reversing fan helps to keep the radiator clear of debris. Working in concert with a two-stage air filtration system, large vent openings in the metal cowling increase airflow to the engine area to ensure the engine runs cooler. Three-stage “Eco Mode” engine operation allows the operator to fine-tune engine

RPM to the demand of the task at hand. “Power Mode” takes advantage of full engine speed for heavy duty applications such as feeding mega shredders and loading/unloading vessels. Operators can reduce engine speed by 12 percent in “Eco Mode” and 19 percent in “Eco+ Mode” while tackling less demanding applications like material clean-up and sorting to significantly reduce fuel consumption over “Power Mode.” The purpose-built MHL390 F handler includes robust design features that increase machine longevity at the port and scrap yard. A centrally mounted slewing ring offers 360 degree maximum load handling capabilities, and its rugged double-row slew ring design disperses load forces over two rows of bearings to improve service life. Large diameter hydraulic boom cylinders, with inverted mounting, offer reliable operation and superior protection from debris. Metal pipes line the top of the boom and side of the dipperstick for maximum protection from damage and outstanding durability. Hydraulically elevated to improve the operator’s sightline, the cab of this new heavy duty handler offers a maximum standard 21.0-ft. (6.4 m) eye-level operation and independent 7.2-ft. (2.2 m) forward move-

ment. For port applications, a special “port” cab raiser system is available on demand to elevate maximum eye level to 28.5 ft.(8.7 m). Inside the cab, the main 7.0-in. (17.8 cm) wide video graphics array (WVGA) touchscreen display offers intuitive machine function for more efficient operation. With video images shown on a separate color display, the MHL390 F handler comes standard with a review-view camera, while machines with the port lift cab riser option include a standard 360 degree camera system, enhancing visibility of the work area. The purpose-built handler’s joystick configuration places all critical machine movements within the operator’s reach and leaves room for customization. A central service platform on the upper carriage of the MHL390 F handler substantially reduces daily maintenance time. Service technicians quickly access the engine, fuel and DEF fill points, hydraulic oil tank, and central lubrication system from the platform, improving machine uptime. The automatic central lubrication system greases multiple points on the upper carriage throughout the day to increase machine reliability. Additionally, the Fuchs Telematics system, standard on the MHL390 F handler

in North America, allows customers to further optimize machine efficiency and helps to improve uptime by alerting key individuals of upcoming service intervals and potential machine issues. The new MHL390 F handler’s modular design, coupled with a long list of options, make this machine one of the most flexible on the market to meet specific application needs. Wheeled standard and extended undercarriages can be equipped with up to 2.6-ft. (0.8 m) and 4.6-ft. (1.4 m) pylon risers respectively to increase the operator’s sightline. Replacing the wheel drive system, standard and XL crawler undercarriages help to disperse machine weight over a larger area for lower ground contact pressure, while up to 2.6-ft. (0.8 m) and 12.1 ft. (3.7 m) pylon risers for the standard and XL undercarriages respectively can be added in between the upper and lower carriages. The MHL390 F material handler can be equipped with either a diesel or electric motor and can be configured for stationary operation, further increasing machine flexibility. For more information, visit www.terexfuchs.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The heavy duty Fuchs MHL390 F material handler unseats the MHL380 handler as the largest and most productive machine in the Fuchs product line.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2017 • Page 53

Attachments can make your machine moree valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. s. Allied has become attached to your machines. Allied’s construction onstruction and demolition attachments are productive tive and dependable. State-of-the-art technology.Full gy.Full product line. Competitive price and performa ance. Allied offers innovative, problem-solving g capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call us at 1-800-321-1046 or visit AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251

2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661 Fax: 502/732-8355

ILLINOIS TRUCK & EQUIPMENT www.iltruck.com 320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486

HOWELL TRACTOR AND EQUIPMENT

HIGHWAY EQUIPMENT COMPANY

www.howelltractor.com 480 Blaine St. Gary, IN 46406 800-852-8816 Fax: 219-977-6395 2770 May Rd. Peru, IL 61354 815-224-3003 Fax: 815-224-2538

www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411

Page 54 â€¢ January 14, 2017 â€¢ www.constructionequipmentguide.com â€¢ Recycling Section â€¢ Construction Equipment Guide

CRUSHING

MA ATERIAL TERIAL HANDLING HAN NDLING

SCREENING

TRACKS

ZZZ PFDOOLVWHUHTXLSPHQW FRP

ZZZ DPVWDWH FRP

ZZZ UPVHTXLSPHQW FRP

WASHING W ASHING & CLASSIFYING CL LASSIFYING

$YH

R K D\ RX L ,

ZZZ JHQHTXLS S FRP 0DLQ $YHQXH )DUJR 1' 701-282-2662 Â‡ )D[

1 /HZLV $YHQXH 6LRX[ )DOOV 6' 605-336-9 9000 â€¢ )D[

The complete so ource for equipment in th he aggregate, construction tion and recycling industries. Offering industry-lea ading brands such as the Piioneer Jaw Crusher, KodiakÂ® Plus Cone Crusher, SuperStackerÂ® Â® Extendable Stackerr, ProSizerÂ® Mobile Screening g Plant, ComboÂ® Screen, Vari-Vibe a High-Frequency Screen, Â® Duo-Vibe High-Frequency e Screen, Series 9000 0 equipment, Fast Trrax, Glob bal Track and FastPack.

www.k kpijci.com pijci com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2017 • Page 55

ALTA EQUIPMENT COMPANY

BRANDEIS MACHINERY & SUPPLY COMPANY

www.altaconstruction equipment.com

www.brandeismachinery.com

Detroit, MI 313-394-1811 Grand Rapids, MI 616-878-7450 Flint, MI 810-744-4840 New Hudson, MI 248-356-5200 Traverse, MI 231-943-3700

Louisville, KY 502-491-4000

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

HOWELL TRACTOR & EQUIPMENT LLC www.howelltractor.com

GIBSON MACHINERY LLC www.gibson machinery.com

Gary,IN 800-852-8816

Cleveland, OH 440-439-4000

Peru, IL 800-342-6072

Pittsburgh, PA 724-695-5000

ROLAND MACHINERY CO. www.rolandmachinery.com

Carterville, IL 618-985-3399

Franksville, WI 262-835-2710

East Peoria, IL 309-694-3764

DePere, WI 920-532-0165

Bridgeton, MO 314-291-1330

DeForest, WI 608-842-4151

Columbia, MO 573-814-0083

Eau Claire, WI 715-874-5400

Cape Girardeau, MO 573-334-5252

Schofield, WI 715-355-9898

Palmyra, MO 573-769-2056

Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO.

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com

www.vlpco.com

Kansas City, MO 800-878-9290 Joplin, MO 800-878-8223 Brookline Station, MO 800-955-2729 Wichita, KS 800-878-3346 Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

Savage, MN 800-888-9515

Milan, IL 800-633-9114

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Sioux City, IA 800-633-9104

Page 56 • January 14, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

LET’SS BE CLLEAR SCREEN MA ACHINE PRODUCTS ARE BETTE ER ... BY DESIGN!

TRAMP IRON RELIEF SYSTEM

Even the most po owerful jaw crusher can be stopped by a blockage of material at the base of the jaws. That means downtimee, e and that means lost productivity.

Issue: Non-crushable item gets lodged at the nip angle of the t jaw crusher.

Screen Machine’s JXT Jaw 0% Financing Crusher features our exclusive Blockage Clearan nce and Tramp for 48 Months Iron Relief System. m. It lets the now available! on all new factory orders closed side settin ng expand to clear blockages g and a maintain production. p

Solution: The Tramp Iron Relief Syste em autom matically ti ll wiidens d the closed c side ssetting, letting the item through.

Visit our web sitee for full details on how it works, and how it helps you work better ... www.screenmach . hine.com/jxt-jaw-crusher.php .

American Made Inno American-Mad ovation Since 1966 800-837-3344

7740-927-3464 40-927-3464

email@screenmachine.com email@screenmachin ne.com

See how it works w at www.screenmachine.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2017 • Page 57

You Des Deser serve the Beest. From our most compact stump grinders and hand-fed chippers through our largest whole tree chippers and Thhe Beast® recyclers, Banddit® equipment is built to make you money. We reduce your cossts by maximizing fuel efficienc ciency and reducing downtiime. And we increase your income me by producing the highest st quality end product for your our market. Bandit builds the beest hand-fed chippers, stum mp grinders, whole tree chippers, The Beastt recyclers, track carriers annd skid steer attachments in the industry. And eqqually as important... Bandit Builds YYour our Bottom Line.

www.banditcchippers.com | 1.800.952.0178 78 | Remus, MI - USA VISIT YOUR NEAR REST AUTHORIZED DEALE ER LOCA ATION TION LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3633 Fax: 847-678-7570

West Chicago, IL 630-293-0606

Mokena, IL 708-596-8050

Yorkville, IL 630-553-0150

Wauconda, IL 847-526-4255

www.atlasbobcat.com

1200 East Highway 13 Burnsville, MN 55337 952-894-0894 877-262-2284

588 Outpost Circle Hudson, WI 54016 715-531-0801 866-268-2418

3101 Spruce St. Little Canada, MN 55117 651-407-3727 877-331-0295

www.tristatebobcat.com

7800 Broadview Rd. Parma, OH 44134 440-340-3001

535 N. Hwy Drive Fenton, MO 60326 636-349-1141

www.kandksupply.com 3218 Marshall Dr. Amelia, OH 45102 513-685-0808 www.buckeyeequipmentsales.com

Ashland, KY 606-928-3477

Cross Lanes, WV 304-204-1818

Norton, WV 304-636-6421

Cowen, WV 304-226-3299

Pleasant Valley (Fairmont), WV 304-534-5454

Pikeville, KY 606-432-0321

Beaver, WV 304-255-1525

www.lec1.com

Page 58 • January 14, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

CEMCO’s Turbo 128 V-Twin VSI Crusher Features Large Capacity, Durability

Alta Equipment Company www.altaequipment.com

8840 Byron Commerce SW Byron Center, MI 49315 (616) 878-7450 Fax: (616) 878-7650

1061 Stepke Ct. Traverse, MI 49685 (231) 943-3700 Fax: (231) 943-8110

G3283 S. Dort Hwy. Burton, MI 48529 (810) 744-4840 Fax: (810) 744-1523

56195 Pontiac Trail New Hudson, MI 48165 (248) 356-5200 Fax: (248) 356-2029

5105 Loraine St. Detroit, MI 48208 (313) 394-1811 Fax: (313) 394-1812

Brandeis Machinery & Supply Co. www.brandeismachinery.com

Evansville, IN • (812) 425-4491 Ft. Wayne, IN • (260) 489- 4551 Indianapolis, IN • (317) 872-8410 Corbin, KY • (606) 528-3700 Lexington, KY • (859) 259-3456 Louisville, KY • (502) 491-4000 Paducah, KY • (270) 444-8390 Stanville, KY • (606) 478-9201

The Turbo 128 V-Twin VSI Crusher is fully customizable to enable production of several types of aggregate materials, opening it up for use in a variety of industries, including energy production, mining and recycling.

With the ability to process materials up to 6-in. (15 cm) in diameter, the Turbo 128 V-Twin VSI Crusher is among the largest models in CEMCO Inc.’s complete line of vertical shaft impact crushers. The crusher is ideally suited for the production of 1.5-in. (3.8 cm) aggregate rock commonly used in concrete for roadbuilding applications. Additionally, the Turbo 128 is fully customizable to enable production of several types of aggregate materials, opening it up for use in a variety of industries, including energy production, mining and recycling. Driven by a dual-drive, optimally balanced V-Twin motor design, the Turbo 128 V-Twin offers greater power input and higher product output. The Turbo 128 is available with up to 900 hp, weighs about 42,000 lbs. (19,050 kg) and offers production capabilities as much as 1,000 tph (907 t). Featuring advanced internal components and operation on the principles of centrifugal force, the Turbo 128 V-Twin crusher is efficient and economical. Material enters the crusher through the wear-resistant adjustable feed tube and drops onto an impeller table. At an rpm of up to 1,000, centrifugal force directs the material from the impellor and casts it against a stationary, abrasive-resistant anvil. The material shatters along natural impact points, resulting in uniform, cube-shaped material with minimal slivered, “slabby” product. The Turbo 128 features heavy-duty, selfaligning spherical roller bearings, allowing it to handle dynamic loads up to 366,000 lbs. (166,015 kg). Designed to be fully customizable to suit each individual customer’s application and desired material output, the combination of rotor size and type, rotor speed and other configurations determine the final product size produced by the Turbo 128 V-Twin. The crusher comes equipped with a Shoe Table rotor and Anvil Ring. A Rockshelf anvil is available for the processing of medium- to low-abrasion material. Because it’s able to produce a consistent, cubical product,

the Turbo 128 V-Twin provides higher production of saleable material with less waste. In addition to being more efficient and economical, the Turbo 128’s consistency proves especially helpful in meeting ever-changing state DOT specifications. Uniformly graded cubical product provides stronger asphalt in comparison to slivered or elongated material, according to the manufacturer. With minimal maintenance requirements and high-quality construction, the Turbo 128 is designed for economical ownership and operation. The drive motors are installed at the same end as the crusher to reduce cyclical vibration, extending bearing life. Additionally, the design allows for easier belt tension. The unit’s upper and lower double-row spherical-bearing pedestal system offers the longest operational life of any VSI crusher due to CEMCO’s customized lubrication system. The system is designed to maintain the proper quantity of clean, cool oil on the bearings, reducing maintenance and repairs while increasing longevity. Furthermore, the Turbo 128 V-Twin crusher is equipped with a hydraulic lid lifter to provide easy access for regular inspection and maintenance. The Turbo 128 V-Twin is offered in a trailer-mounted configuration to enhance portability and convenience. Other options include a water flush system, designed for wet or sticky material, dust control systems, diesel motors and automation software. CEMCO now provides VSI crushing equipment in more than 27 nations to the majority of the world’s largest producers and green-friendly companies. Its complete line of VSI crushers ranges from the Turbo 35 to the Turbo 175, and is available in diesel or electric and stationary or portable options. For more information, call 505/864-1200 or visit www.cemcoturbo.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2017 • Page 59

A WIRTGEN GROUP COMPANY

POWERFUL PERFORMANCE. JUST TAKE YOUR PICK. MOBICAT MC 110 EVO

MC 110 R EVO I MC 110 Z EVO

EFFICIENT HIGH ACHIEVERS IN TWO VERSIONS. Whether you opt for the MC 110 EVO Z with its independent double-deck prescreen, or the R-version with its vibrating feeders and integrated slotted grate – the crushing unit with its elevated crushing jaw ensures optimal material feed and an impressively high crushing capacity of up to 330 t/h for both systems. Combined with their innovative and cost-effective diesel-directdrive concept and exceptional transportability, powerful performance is guaranteed. The MOBICAT MC 110 EVO.

www.kleemann.info

Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330 Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Page 60 • January 14, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

GET A HAND DLE ON OPERAT ATING COSTS Penn Jersey Machinery

Terex® Fuchs Material Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® ere Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus s compettiti itive material handl dlers

Deptford, NJ 856-227-6400

Frenchtown, NJ 908-824-4200 POWERSCREEN INDIANA, Lionville, P PA A INC. www.powerscreenindiana.com 610-363-9200 255 N. Hetzler Court, Suite C Angola, IN 46703 260-665-5816 • Fax: 260-665-3241

Staten Island, NY 718-4 718 448 48-24 2444 44

The Tere e x Fuchs Tel e ematics System for real time fleet and equipment metrics to manage it all Plus you can always rely on your local Terex Fuchs distributor to keep your material handlers operating at peak efficiency, with Tere e x certified parts and trained service technicians.

Chadwick-Baross Chelmsford, MA 800-804-0775 Bangor, ME 800-698-4838 COMPANY WRENCH

Caribou, ME 4805 Scooby Lane NW 800-270-2547

www.companywrench.com Carroll, OH 43112 866-262-4181 • Fax: 740-687-9130

WCleveland Westbrook, estbrook, M ME Branch 8525 800 00-262-5 262-5714 714 Golden Oak Pkwy

Oakwood Village, OH 44146 440-439-4567 • Fax: 440-439-1789

Concord, N H 603-224-4063

Piketon Branch 3668 US Route 23 South Piketown, OH 740-289-3294

Edward Ehrbar Inc. Cincinnati Branch

Y3120 o S.ers, onk NY Verity Pkwy. Middletown, OH 45044 91 4-73 8-5 100 513-649-8105 • Fax: 513-649-8107 7019 Brookville Rd. Holbrook, NY Indianapolis, IN 46239 317-375-7790 631-5 63-7 6 00 Fax: 317-375-7792

For more information on Terex Fuchs material handlers, contact your local Terex Fuchs distributor or visit us at terex.com/construc ction

New Yo ork City, NY 718-626-3331 Danbury, CT 203-743-0088

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2017 • Page 61

Illinois

Indiana

Minnesota

Ohio

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Theco, Inc.

AGGCORP

7144 N. Harlem Ave.

255 N. Hetzler Court

5470 Quam Ave. NE

22800 Lakeland Blvd.

Chicago, IL 60631

Angola, IN 46703

St. Michael, MN 55376

Cleveland, OH 44132

midwestcrushandscreen@gmail.com

sales@powerscreenindiana.com

www.thecoinc.com

www.aggcorp.net

847.271.5027

313.841.8370

800.776.0335

614.309.6854

Page 62 • January 14, 2017 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

The operator cleans up the concrete remains of the old bridge.

The operator of a Cat excavator and dozer work the ground at the site of the old TH 36 bridge.

Crews Complete Two New Bridges With Wider Shoulders BRIDGE from page 1

Last summer, bridge crews did something about it. They demolished the old bridge and recently completed two new bridges with wider shoulders carrying two lanes of traffic each direction. Along with the bridge work, crews constructed a total of 1.1 mi (1.8 km) of five lane highway. MnDOT awarded the $13 million contract to Ames Construction, based out of Burnsville, Minn. The company is a full service heavy civil and industrial general contractor with offices throughout the United States and Canada. For this project as the general contractor, Ames crews also took on the bridge and excavation work. The company brought on several other contractors to manage the lighting, railing, erosion control, signage and striping work. TH 36 is a popular east/west commuter highway and vital connection between I 35W running through Minneapolis and I 35E running through St. Paul. Just west of the bridge, the highway brings drivers to a 1 sq. mi. (2.6 sq km) high density, shopping destination packed with two large shopping malls surrounded by busy strip malls and dozens of commercial businesses. Lexington Avenue is a popular local arterial and runs for approximately 15 mi. (24 km) from the south side of St. Paul through several northern suburbs and links up near I 35E in Lino Lakes,

Minnesota. Eric Rustad, PE, MnDOT project engineer said the project went well and called the six month bridge and road construction “pretty linear.” “We needed to take out the old bridge, build two new bridges, build up the grade for the new highway lanes and build the ramps.” Working with Ames as the prime contractor on this project, Rustad said, “it’s nice to be able to work with one prime and not as many sub-contractors. They can control the schedule and work flow that much better.” Motorists now have two new bridges with wider shoulders and greater separation between opposing traffic lanes at its center eliminating the somewhat claustrophobic feeling caused by the original, more narrow bridge deck design. The eastbound bridge at 62.5 ft. (19 m) is nearly as wide as the original bridge which carried a 73.3 ft. (22.4 m) deck. The deck on the new bridge includes two, 12 ft. (3.7 m) traffic lanes and a 23.3 ft. (7.1 m) inside shoulder, which can be converted to a third, High Occupancy Vehicle (HOV) lane in the future. The outside shoulder is 12 ft. wide. The westbound bridge is 45.1 ft. (13.7 m) wide and the deck carries two, 12 ft. traffic lanes, a 6 ft. (1.8 m) inside shoulder and a 12 ft. outside shoulder. The bridge is designed to add a third traffic lane for a future HOV lane if necessary.

Crews work on a section of the new highway digging sewer, grading and pushing dirt.

Work began in mid-April when the local electric utility rolled in to move a string of power poles and line farther out from the construction site to add more swinging space for a Terex HC 50 crane Ames crews would move in. With the pole line quickly relocated in three days, Ames crews closed down Lexington Avenue,

dug in and wasted no time building a temporary, four lane bypass to wrap around the bridge demolition and construction site. As traffic continued to roll on the existing highway, road crews protected by concrete barriers worked safely inside a large swath of MnDOT right-of-way (row) on the south side of the highway and

began building from the bottom up a 1 mi. (1.6 km) four lane temporary highway surface. Equipment operators at the controls of a variety of Cat equipment including backhoes, graders and dozers dug temporary sewer lines, pushed fill and graded the road base. Just after six weeks of construction, dumping an estimated 18,000 cu. yd. (13,800 cu m) of fill, lining the bypass with roughly 7,000 ft. (2,100 m) of concrete barriers and placing 5,600 tons (5.7 t) of asphalt, crews opened the bypass to traffic. When crews switched traffic to the temporary by-pass, the clock started ticking on the A and D Contract. Sixty days to build the bridge and 110 days to re-open Lexington Avenue below it. New highway and bridge construction began immediately. Resembling a giant sand box through the summer, equipment operators free of traffic had plenty of room to roam and strip pavement, dump fill and grade the road base as construction progressed on the bridge. The biggest challenge on this project was the rain, but it failed to bring work to a complete halt and cause serious traffic delays. “Every time a storm came through which was at least once a week, we were getting two to four inches,” said Rustad. The heavy rains forced some random lane closures to make minor erosion control repairs to the see BRIDGE page 72

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • January 14, 2017 • Page 63

BUTLER MACHINERY CO. www.butlermachinery.com 3402 36 St. SW Fargo, ND 58014 701-280-3100 800-726-7475 th

3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46 St. Grand Forks, ND 58201 701-775-4238 th

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 7910 Highway 2 W Devils Lake, ND 58301 701-665-3800 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

Lokotrack® ST2.8™ exceeds expectations in making a clean cement additive That’s how we make the big difference, the Metso Way.

A Lokotrack ST2.8 mobile scalping screen is helping a cement plant produce a clean additive for its production process, resulting in significant cost savings. The operator is saving up to $20 a ton by producing the additive using the ST2.8, rather than buying it from an outside source. The Lokotrack ST2.8 has a larger throw than most machines in its size class, which allows it to produce a cleaner end product. The unit’s powerful Caterpillar C4.4 diesel engine meets the latest emissions standards, and a new hydraulic system helps to reduce fuel consumption. Find out more about profitable mobile screening at metso.com/showroom/aggregates

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8600 Fax: 515-309-0667

AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-6275

Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583

Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. • Eau Claire, WI 54701 715-832-9792 • Fax: 715-832-7767

#TheMetsoWay

Page 64 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Rebuild Center Offers Three Levels of Service for Variety of Iron BRAMCO from page 14

The Rebuild Center offers three levels of service for a wide variety of construction, material handling and mining equipment with all work conducted by a staff of eight trained technicians. Refurbish Service: • Machines inspected by The Rebuild Center personnel •The Rebuild Center provides customer with an estimate • Routine updates provided to the customer • Disassembly/reassembly for transfer as well as hauling performed on a time and materials basis • Major components repaired • Wire harnesses, hoses and cab internals repaired as necessary • Work backed by a 90-day warranty • Parts backed by manufacturer’s mandated warranty Rebuild Service: • Machines inspected by The Rebuild Center personnel • The Rebuild Center provides customer with an estimate • Routine updates provided to the customer • Disassembly/reassembly for transfer as well as hauling performed on a time and materials basis • Major components repaired or replaced • All wire harnesses, hoses replaced

• All cylinders rebuilt or replaced and tested • Frame and body damage repaired to factory specification • Work backed by a 180-day or 2,500 hour warranty (whichever occurs first) • Parts backed by manufacturer’s mandated warranty Remanufactured Service: • Machines inspected by The Rebuild Center personnel • The Rebuild Center provides customer with an estimate • Routine updates provided to the customer • Disassembly/reassembly for transfer as well as hauling performed on a time and materials basis • Major components replaced • All wire harnesses, hoses replaced • All cylinders replaced • Frame and body damage repaired to factory specification • Work backed by a 180-day or 2,500 hour warranty (whichever occurs first) • Parts backed by manufacturer’s mandated warranty To date, the machines serviced by The Rebuild Center have included a combination of contract work for end users and speculative units for Brandeis and Power Equipment. Much of the work has involved a complete tear down to the frame and rebuild to original condition. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Firm Purchases Three-Crane Package From Cleveland Crane & Shovel GROVE from page 12

“I met John Grove when I was working for my father,” said Manos. “He purchased one of the first Grove TM 120 12-ton truck cranes in the United States. At the time, my father told me that hydraulic cranes were destined to be the cranes of the future.” Over the years, Manos has watched the evolution and growth of Grove cranes and continues to be impressed with the company’s engineering and build quality. “Grove is a proven product, and engineering innovations have enabled the company to offer cranes with reduced weight, outstanding mobility and quick assembly and disassembly time,” said Manos. “Grove cranes also stand out in terms of maintaining their value.” As for company growth, the new Grove 275-ton all terrain crane is one of the largest Grove cranes in northeast Ohio and positions General Crane

Rental for work that, in the past, was beyond its scope. Job applications for the Grove GMK5275 include bridge beam placement, box culvert work, high rise building air conditioning placement, new construction, plant maintenance, pre-cast, tunneling work and steel erection. As Grove’s newest crane introduction, the five-axle AT class crane is equipped with a 223-ft. (67 m) sevensection, full-power Megaform boom with TWIN-LOCK technology and luffing jib. The 275-ton capacity crane can lift loads up to 354 ft. (107.9 m) with inserts and jib. Standards include automatic transmission, MegaTrak independent suspension and tilt cab. The MegaTrak independent suspension and all-wheel steer system designed to ensure that, in rough terrain work environments, all wheels remain on the ground. The system also provides excellent jobsite maneuverability and ground clearance that avoids the need to raise the chassis.

The patented Twin-Lock boom pinning system is designed to reduce weight while increasing boom strength and durability. The Electric Crane Operating System (ECOS) monitors lifting conditions on a full graphic display that includes load charts. The Grove GMK5275 is powered by a Tier III, Cummins QSX15 6 cylinder turbo diesel engine, which is easier to work on and has greater parts availability. According to Manos, the crane was set to work quickly and has been a great value for the company. For more information about Cleveland Crane & Shovel, visit www.craneandshovel.net. For more information about General Crane Rental LLC, visit www.generalcranerental.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

KOBELCO-USA.COM

Grand Equipment Co. 3310 Hudson Trails Dr. Hudsonville, MI 49426 616-896-7700 Fax: 616-896-6700 www.grandequipment.com

Southeastern Equipment Co., Inc. Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 1356 3rd Street Brilliant, OH 43913 740-598-3400 1500 Industrial Parkway Brunswick, OH 44212 330-225-6511

Mid Country Machinery 3478 5th Ave S Fort Dodge, IA 50501 800-206-5936 4734 Sergeant Road Waterloo, IA 50701 319-234-8710 106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910 3875 W Fourth St Mansfield, OH 44903 419-529-4848 26580 St. Rt. 7 Marietta, OH 45750 740-374-7479 8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Miller-Bradford & Risberg, Inc.

404 Breaden Rd. Monroe, OH 45050 513-539-9214

W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

6415 Promler Ave. N. Canton, OH 44720 330-494-3950

DeForest, WI 608-222-9191

27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331

Eau Claire, WI 715-832-3443

7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321

De Pere, WI 920-338-5800

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 65

Blue Ridge Tractor

Illinois Truck & Equipment Co.

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 66 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Yanmar Names Senior Manager of Training, Customer Experience Center Yanmar America announced Tim Miller has been named the senior manager of the company’s new training and customer experience center currently under construction in Acworth, Ga. Miller has more than 24 years of experience in learning development, training and equipment in the agriculture, mining and construction industries. In his new role, Miller will be responsible for the direction and delivery of innovative, solutions-driven learning across all business units and aspects of the company. He also will be in charge of ensuring an excellent customer experience for all visitors to the new center. “Yanmar America’s new training facility will allow us to offer proper training for all aspects of our business, while also providing premium customer experiences through partnerships with the local communities and industry partners. Tim’s vast experience and industry knowledge will only serve to enhance our efforts. We are extremely fortunate to have him leading this new venture,” said Tim Fernandez, president of Yanmar America. Prior to joining Yanmar, Miller was most recently the senior manager of dealer development training and Kubota University of Kubota Tractor Corporation. Other experience includes global training and learning management, product marketing management and similar related roles for several industry-leading corporations. For more information, visit www.yanmar.com/us.

American State Equipment Co. Inc.

Aspen Equipment Company

www.amstate.com 2055 South 108th Street Milwaukee, WI 53227 414/541-8700 2400 North 14th Avenue Wausau, WI 54401 800/242-7113 13915 Lake Drive Columbus, MN 55025 651/464-0996 2385 Becks Road Duluth, MN 55810 218/260-0581

www.aspenequipment.com 1525 S.E. Cortina Dr. Ankeny, IA 50021 515/965-1000 Fax: 515-965-1790 11475 S. 153rd St. Omaha, NE 68138 402/894-9300 Fax: 402-894-9302

Cleveland Crane & Shovel Sales, Inc. Kirby Smith Machinery Inc.

Tim Miller has been named the senior manager of the company’s new training and customer experience center currently under construction in Acworth, Ga.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CNH Receives AEM Industry Award The Association of Equipment present with five of its brands: Case Equipment brand. Manufacturers (AEM) honored CNH IH, Case Construction Equipment, “We believe in taking action in purIndustrial with its “Pillar of the New Holland Agriculture, New suing and shaping manufacturing poliIndustry” award on Nov. 17, 2016, rec- Holland Construction and FPT cy that fosters growth, innovation and ognizing the company’s work to Industrial. The company has been global competitiveness,” said Brad improve the business environment for active in government and public affairs Crews, chief operating officer, CNH the equipment manufacturing industry issues that support manufacturers in Industrial — NAFTA region. “AEM’s in the United States of America in the United States, both with full-time efforts here benefit each of our facili2016. staff dedicated to local and federal ties and employees throughout the This is the fifth consecutive year that issues, and through grassroots efforts U.S., and we look forward to continuCNH Industrial has been recognized such as the Dire States platform organ- ing to work with AEM to strengthen for its efforts to advocate for pro-man- ized by its Case Construction and expand the foundation of ufacturing solutions to electAmerican manufacturing.” ed leaders and voters, and for “AEM is proud to recogits participation in AEM’s “I nize CNH Industrial for its Make America” grassroots efforts this year to champion program. CNH Industrial equipment manufacturing also was presented with the issues during a contentious special “Legacy Award”, election season,” said AEM which honors five consecuPresident Dennis Slater. tive years of achieving “The Pillar of the Industry “Gold Status” in the “I Make Award is a fitting way to America” program. honor CNH Industrial for CNH Industrial operates serving as a foundation of 11 manufacturing facilities our industry.” and 13 research and devel- This is the fifth consecutive year that CNH Industrial (This story also can be opment centers throughout has been recognized for its efforts to advocate for pro- found on Construction the United States that manufacturing solutions to elected leaders and voters, Equipment Guide’s website at employ more than 11,000 and for its participation in AEM’s “I Make America” www.constructionequippeople. The company is grassroots program. mentguide.com.)

12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300 • 877/851-5729

Walter Payton Power Equipment LLC www.wppecrane.com 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260 2832 Fitzgerald Rd. Louisville, KY 40216 877/847-3434 920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 3400 Claremont Avenue Evansville, IN 47712 812/422-6912 Fax: 812/422-6982

www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 800/352-2757 Fax: 952/884-2293

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 67

APA PACIT Y AN NT N TAGE

UP TO

47 %* *

Compared to GMK5150 competition

adius with maximum counterweight

NEW W GMK5150 and GMK5150L

AN NYWHERE. The h strength e h and d mobility bili to handle h dl more jjobs. s. The new w GMK5150 and GMK51150L deliver great ROI due to outstand ding lifting capacitiess and greater jobsite j a accessibility.

lifting ting capacities in ounterw nterweight configurations GMK5150L High-per -performing boom capable of lifting g 11,6 t with 60 m boom — ideal forr tower crane rigging GMK5150 with 51 m boom

•150 t maximum capacity •Narrow w 2, 2 75 m width on 445//95R25 tires •Fuel-effi fficient single -engine design d

Compact p dimensions sions with reduced overall length ength and width

Impressiive lifting, jobsite man neuverability and fuel efficiency help you u achiev hi e greater profi fits. fi

Crane Control System y (CCS) with Boom Configurator ator enhances operator controll and efficiency

Contact your local Grove dealler, or go to www.manitowoccranes.com i m to learn more.

Easy operator access ccess on the crane for secure, fast rigging; igging; especially when working att heights

Page 68 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Quality and reliability are built into every Terex crane. We have the machines you need to succeed. Add to that our commitment to speed and responsiveness, coupled with our global network, and it’s easy to see why Terex Cranes has the expertise to keep you up and running.

DELIVERING SUCCESS TOGETHER

RTL Equipment Inc. (RT-T-HC/CC-AT) www.rtlequipment.com 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267

Contact our distributors and find out how we can help improve your bottom line.

Custom Truck & Equipment (RT-T-HC/CC-AT-BT) 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

For Your Local Terex Dealer, Please Contact: Terex USA, LLC 106 12th St. SE Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: info.cranes@terex.com web: www.terex.com/cranes

1321 Highway 965 Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

Authorized Terex Cranes Distributors © Terex Cranes 2016 · Terex, the Terex Crown design, Demag and Works For You are trademarks owned or licensed by Terex Corporation.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 69

Howell Tractor www.howelltractor.com 480 Blaine Street • Gary, IN 46406 800/852-8816 Fax: 219/977-4220

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Custom Truck & Equipment www.cte-equipment.com 7701 E. 24 Highway • Kansas City, MO 64125 800/861-1065 • 816/241-4888 Fax: 816/241-8826

General Equipment & Supplies, Inc. www.genequip.com 4600 Valley Industry Blvd. S. • Shakopee, MN 55379 800/966-1455 Fax: 952/224-1570 3901 N. Lewis Ave. • Sioux Falls, SD 57104 605/336-9000 Fax: 605/336-0073

Grand Equipment Company www.grandequipment.com 3310 Hudson Trail Dr. • Hudsonville, MI 49426 616/896-7700 Fax: 616/896-6700

Construction Machinery Company www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 Fax: 502/261-9251 2235 Ragu Drive • Owensboro, KY 42303 270/683-2000 • 877/683-2262 Fax: 270/683-3727 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661 Fax: 502/732-8355

Kelbe Brothers Equipment Co., Inc. www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 Fax: 608/221-0610 3101 French Rd. • DePere, WI 54115 920/343-6496 Fax: 920/343-6449

Reed Company, LLC www.reedsales.com 2738 Fauna Road • Lebo, KS 66856 620/256-6609 Fax: 620/256-0288 Junction US 24 & 99 Hwy • Wamego, KS 66547 785/456-7333 Fax: 785/456-6714

Page 70 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Commodity Prices Continue to Gain: Ferrous Metals Drive Higher Index Ben Orhan SENIOR ECONOMIST, IHS GLOBAL INSIGHT PRICING & PURCHASING

The IHS Materials Price Index (MPI) rose for a sixth consecutive week, increasing 1.4 percent to hit a fresh 18-month high. Ferrous metals once again drove the index higher, gaining 3.3 percent. However, it was rubber that provided the largest boost by jumping 10.6 percent, capping off two months of continuous gains. Rubber’s exceptional increase was on the back of buoyant Chinese car sales data, which lifted expectations for tire demand, albeit with the slight reversal of a 2016 car sales tax cut likely to weigh on demand from 2017. As has become customary in recent weeks, both oil and ferrous also gained, with oil enjoying a strong run following widespread production cut announcements.

There also was some positive macroeconomic announcements boosting commodity prices, although there also were several weaker indicators. On the positive side, Chinese industrial production for November increased 0.5 percent on the prior month, maintaining an annual growth rate of just above 6 percent. On the negative side, U.S. manufacturing for November slipped 0.1 percent, as declines in autos pulled the measure lower. The big news, however, was in U.S. interest rates, which rose as expected. The Federal Reserve also articulated a potentially faster path for normalizing interest rates. (IHS Global Insight assumes three increases in 2017.) As noted over the last few weeks, commodity prices are beginning to look rich given U.S. dollar strength, a position that looks even more exposed should the Fed become more aggressive in lifting interest rates in 2017. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

AGC Reports Construction Spending Reaches 10-Year High in November Construction spending hit a 10-year high in November with monthly and year-over-year gains in both public and private categories, according to an analysis by the Associated General Contractors of America. Association officials said the November data indicates that the 2017 outlook for construction is favorable even as they cautioned that demand will vary for different types of construction projects. “These numbers confirm what contractors have been reporting — that there was no let-up in demand last year,” said Ken Simonson, the association’s chief economist. “Most contractors expect to remain busy in 2017, as well, although there will be a shift in the types of projects that are most active. Office construction is especially hot, while manufacturing and apartment construction are slowing sharply, and public investment is a major question mark.” Construction spending in November totaled $1.182 trillion at a seasonally adjusted annual rate, the highest total since April 2006, Simonson said. He added that the November rate was up 0.9 percent from the month before and up 4.1 percent from the November 2015 level. Private residential construction spending increased by 1.0 percent between October and November and rose 3.0 percent over the past 12

months. Spending on multifamily residential construction slipped 2.7 percent for the month but was 11 percent higher than in November 2015, while single-family spending climbed 1.8 percent for the month but dipped 0.9 percent from a year earlier. Private nonresidential construction spending grew by 0.9 percent for the month and 6.4 percent year-over-year. The largest private nonresidential segment in November was power construction (including oil and gas pipelines), which gained 0.5 percent for the month and 1.5 percent over 12 months. The next-largest segment, commercial (retail, warehouse and farm) construction, rose 0.3 percent in November and 12 percent year-overyear. Manufacturing construction decreased 1.1 percent for the month and is down 8.0 percent from a year before. Private office construction spending reached an all-time high, rising 1.9 percent for the month and 31 percent compared with November 2015. Public construction spending moved up 0.8 percent from October to November and 2.6 percent from the November 2015 rate. However, public totals have been volatile for the past two years, Simonson observed. He cautioned that federal funds for infrastructure remain a weak point and that a number of states are facing new fiscal

challenges that may jeopardize investment in infrastructure and public universities. Association officials said the November spending data offers some early insight into the outlook for construction in 2017. They added that the association will release its annual Construction Hiring and Business Outlook on January 10 which is based on survey results from construction firms across the country. That outlook offers insights into whether firms plan to hire new employees, which market segments they expect to grow in the coming year and the significant challenges firms expect to face in the coming months. “Now that construction spending levels are approaching prior peak levels, we want to know whether the industry will continue to expand this year,” said Stephen E. Sandherr, the association’s chief executive officer. “One factor driving the outlook for 2017 will be whether the new President and Congress can find a way to make needed infrastructure investments, cut regulatory burdens and provide relief for rising health care costs.” For more information, visit www.agc.org.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONTINENTAL EQUIPMENT CORP.

ROAD MACHINERY & SUPPLIES CO.

www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

BERRY TRACTOR AND EQUIPMENT CO. www.berrytractor.com 930 S West St. Wichita, KS 67213 316/943-4246 1750 SW 41st St. Topkea, KS 66609 785/266-9509 3830 W Jones Ave Garden City, KS 67846 620/277-2290 2060 N West Bypass Springfield, MO 65803 417/831-2651

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 71

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898

GENERAL EQUIPMENT & SUPPLIES, INC. www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

MY CUSTOMERS LLOVE KOMATSU! T

SUPPORTED WITH PRIDE

Page 72 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EMPLOYMENT OPPORTUNITY

STOPS FUEL GELLING NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wraps around the filter housing and reduces or eliminates the possibility of cold weather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternating current or a convertible model combining dc and ac. A standard 12V or 24V Universal Fuel Filter Preheater is priced at $138.

POWER YOUR FUTURE WITH DEUTZ

DEUTZ Power Center Midwest is expanding its reach!

The ‘peel & stick’ Universal Preheater attaches to the bottom or the side of the oil pan and converts the housing into a heat transfer element. It warms the oil without burning it making cold starts easy. It can be used on gearboxes, transmissions, transfer cases, water tanks and even bulk oil tanks. The Preheater plugs into any 120 or 240 volt outlet and consists of a thin silicone fiberglass pad containing a metal grid. To install it, you clean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edges of the pad and place a flexible ceramic insulation pad over it. It is available in several models depending on the lube capacity. A 50 watt unit sells for $44 and a 350 watt unit sells for $133. BULK FUEL STORAGE FILTER HEATER The newest Diesel Fuel Filter Preheater fits 3.5" to 4" diameter by 7" to 10" tall filters. Stops diesel gelling in the filter so that fueling equipment can proceed even in the coldest temperatures. 120v with thermostat. $225.

PO Box 83, North Aurora, IL 60542-0083

800-530-5064 Local: 630-966-8992 Fax: 630-801-9569 sales@etipinc.com • www.etipinc.com universalpreheater.etipinc.com (Veteran Owned Small Business)

Caterpillar/Olympian Diesel

Generator

200kw Stand by in-line, 6 cylinder, 3 phase diesel generator, 650 Hrs P.O.R. Call: 800-523-2200 ext. 170 Email: tmckeonjr@cegltd.com

Immediate Full Time Opportunities:

Chicago, IL: District Sales Manager

North Kansas City, MO: Production Supervisor Warranty Administrator

St. Louis, MO: District Sales Manager Parts Logistics Specialist Shop Service Technician

Generous Benefits 401k Match Competitive Pay Apply Immediately:

deutzamericas.com/ employment

New Replacement Bridges Carry Two Lanes of Traffic in Each Direction BRIDGE from page 62

slopes yet did not cause any significant inconvenience to the traveling public. “There was always something to do and somewhere they could work with the rain,” Rustad said. “The mainline wasn’t affected that much. It was in the low areas, building the ponds, the ramps and our slopes. Sometimes we had to wait a day or two to let things dry out.” Ames crews hit their first milestone of the project when they opened the new westbound lanes to traffic in September while road work continued on the eastbound lanes and traffic continued to roll eastbound on the temporary bypass. Just days before the bridge open to traffic, the local electric utility moved back in and closed the westbound lanes for one night during the work week to re-string the power line crossing above the highway. Because the above average rainfalls began eating into the project schedule, MnDOT extended the time frame for Ames crews to open Lexington Avenue within 120 days. With the 10 day extension and the contractor working 12 hour days, six days a week, Ames crews met the amended deadline date to have traffic rolling on all highway lanes and Lexington Avenue below by the middle of November. The wet weather pattern crews battled all summer began to dry out in September and October. Though not in the original plan, MnDOT took advantage

of the drier and above average temperatures to shut down the eastbound lanes of the by-pass during the last weekend in October to pave the new eastbound lanes, install guardrail and mill and overlay the ends of the road. Throughout the construction season, annoyances to the traveling public were few and relatively painless compared to other highway projects. Except for the rare lane closures and the tighter curve on the temporary pavement forcing the speed limit to be cut to 45 mph, drivers always had four traffic lanes throughout the length of the project. Even below the bridge, the closure of Lexington Avenue was manageable because there were other, nearby roads local traffic could dump into. Because of the 85,000 ADT and the huge shopping hub a prime destination, building the bridge and road under traffic conditions wasn’t an option, Rustad said. “All day long there is traffic on this highway. There was no way to go down to one lane each direction. We would have caused traffic back-ups all day and worse during peak hours,” Rustad said. “So, reducing lanes just were not an option.” Ames crews will be completing minor punch item work will this spring. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 73

www.westsidetractorsales.com 7355 East 30th St. Indianapolis, IN 46219 317-544-3411 Fax: 317-544-3420

www.dieselmachinery.com

www.vlpco.com

4301 North Cliff Ave. Sioux Falls, SD 57104 888-753-8907

4100 Gardner Ave. Kansas City, MO 64120 800-878-9290 816-241-9290

39288 133rd St. Aberdeen, SD 57401 888-484-6312

Fort Wayne, IN 260-482-8576 Fax: 260-483-4057

3801 North Deadwood Ave. Rapid City, SD 57702 800-658-3047

Bloomington, IN 812-333-9677 Fax: 812-333-9731

Joplin 800-878-8223 417-781-8222 Springfield 800-955-2729 417-887-2729

LaFayette, IN 765-447-6933 Fax: 765-448-9038

Wichita 800-878-3346 316-838-3346

South Bend, IN 574-232-1461 Fax: 574-233-3324

Topeka 800-878-4345 785-267-4345 Garden City 800-511-1435 620-275-1996

www.brookstractor.com Sun Prairie 1900 W. Main St. P. O. Box 9 Sun Prairie, WI 53590 608- 837-5141 Fax: 608-837-4012 Milwaukee 12101 W. Silver Spring Dr. Milwaukee, WI 53225 414- 462-9790 Fax: 414-462-7242 De Pere 1031 Lawrence Dr. De Pere, WI 54115 920- 336-5711 Fax: 920-336-6405

West Salem 451 W. Avenue N. West Salem, WI 54669 608- 786-2644 Fax: 608-786-2206 Plover 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 Fax: 715-254-2799 Opening this Year Mount Pleasant 1609 SE Frontage Rd. Mt. Pleasant, WI 53177

Bobcat of St. Louis 401 West Outer Road Valley Park, MO 63088 636-225-2900 1885 West Terra Lane O’Fallon, MO 63366 636-240-9020 9801 West State Route 161 Fairview Heights, IL 62208 618-397-1847 www.bobcatofstl.com Bobcat of Columbia 1101 N Lenway Drive Columbia, MO 65202 573-866-9436 www.columbiabobcat.com Bobcat of Marion 1417 Donna Drive Carterville, IL 62918 618-985-8920 www.bobcatofmarion.com Bobcat of Evansville 2934 Lynch Road Evansville, IN 47711 812-422-8200 www.bobcatofevansville.com

Page 74 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ACPA Awards ‘Excellence in Concrete Pavements’ Honors The American Concrete Pavement Association (ACPA) has named recipients of its 27th annual “Excellence in Concrete Pavements” awards, which recognize quality concrete pavements constructed in the United States and Canada. The awards program encourages high-quality workmanship in concrete pavement projects, and serves as a way to share information about challenging and highly successful projects. Judges representing various stakeholder groups throughout the transportation-construction community evaluate projects for the award consideration. The program recognizes contractors, engineers, and project owners who completed outstanding projects. The program requires projects to be completed in the calendar year prior to judging (2016). The recipients of the 2016 ACPA Excellence Awards are: Reliever & General Aviation Airports (Silver Award) Davenport Municipal Airport, city of Davenport Contractor: McCarthy Improvement Company Owner: Davenport Municipal Airport, city of Davenport Engineer: McClure Engineering Company (Gold Award) Waukesha County Airport Runway 10/28 Reconstruction, Waukesha County Airport Contractor: Zignego Company Inc. Owner: Waukesha County Airport/Wisconsin DOT — Bureau of Aeronautics Engineer: Mead & Hunt Commercial Service & Military Airports (Silver Award) Runway 1R-19L Rehabilitation —Phase 1 at Kansas City International Airport Contractor: Ideker Inc. Owner: Kansas City Aviation Department Engineer: Burns & McDonnell | RDM International Inc. (Gold Award) O’Hare Modernization Program — South Airfield Runway 10R-28L Contractor: Acura Inc. Owner: O’Hare Modernization Program Engineer: O’Hare Runway Designers LLC Overlays (Airports) (Gold Award) Runway 13/31 Rehabilitation — Virgil I. Grissom Municipal Airport Contractor: E&B Paving Inc. Owner: Lawrence County Board of Aviation Engineer: Woolpert Inc. Industrial Paving (Gold Award) East I-40 Point of Entry Weigh Station, Roland, Okla. (Sequoyah County) Contractor: Duit Construction Company Inc. Owner: Oklahoma Department of Transportation Engineer: Guernsey RCC (Industrial) (Gold Award) Conagra Foods Distribution Center, Frankfort, Ind. Contractor: E & B Paving Inc. Owner: The Opus Group Engineer: American Structurepoint RCC (Special Application) (Gold Award) Chapel Landing — Phase I in the city of Bel Aire Contractor: Andale Construction Inc. Owner: city of Bel Aire, Kans. Engineer: Baughman Company PA Concrete Pavement Restoration (CPR)

(Gold Award) Annual Airfield Pavement Rehabilitation at Denver International Airport Contractor: Interstate Highway Construction Inc. Owner/Engineer: city and county of Denver, Department of Aviation Municipal Streets & Intersections (>30,000 SY) (Silver Award) Appleton Road (STH 47) Interchange, city of Appleton, city of Menasha, and Winnebago County, Wis. Contractor: Vinton Construction Company Owner/Engineer: Wisconsin DOT, NE Region Engineer: Omni Associates (Gold Award) Cedar Lane in Norman, Okla. Contractor: Duit Construction Company Inc. Owner/Engineer: Oklahoma DOT Engineer: Cardinal Engineering Municipal Streets & Intersections (<30,000 SY) (Silver Award) U.S. 285 —Antonito Reconstruction, Antonito, Colo. Contractor: Concrete Works of Colorado Owner: Colorado DOT, Region 5 Engineer: Muller Engineering Company Inc. (Gold Award) Roundabout Projects on County Highway CE and Eisenhower Drive, and Eisenhower Drive & Van Roy Rd., Buchanan (Outagamie County), Wis. Contractor: Vinton Construction Company Owner: Outagamie County, town of Buchanan Engineers: OMNNI Associates | Gremmer & Associates County Roads (Silver Award) 7th Road (Veterans Pkwy)/U.S. 31 Interchange, Marshall County, Ind. Contractor: Primco Inc. Owner: Indiana DOT, LaPorte District Engineer: CHA Consulting Inc. (Gold Award) Weld County (Colo.) Parkway — U.S. 34 to WCR 60 ½ Contractor: Interstate Highway Construction Inc. Owner: Weld County, Department of Public Works Engineer: Atkins North America State Roads (Silver Award) U.S. 36 Reconstruction, Republic County, Kan. Contractor: Smoky Hill LLC Owner/Engineer: Kansas DOT (Gold Award) State Highway 3, Asher, Okla. Contractor: Duit Construction Company Inc. Owner/Engineer: Oklahoma DOT Overlays, Streets and Roads (Silver Award) St. Charles Convention Center Parking Lot, St. Charles, Mo. Contractor: Veejay Cement Owner: city of St. Charles, Mo. | St. Charles Convention Center Engineer: Bax Engineering Company (Gold Award) Iowa D59 Wall Lake, Sac County, Iowa Contractor: Cedar Valley Corporation LLC Owner/Engineer: Sac County, Iowa Overlays, Highways (Silver Award) Interstate 72 Overlay, Sangamon County, Ill. Contractor: Illinois Valley Paving Company, a Div. of UCM Owner/Engineer: Illinois DOT Engineer: Illinois DOT, District 6 (Gold Award) PennDOT SR 50 Millers Run, South

Fayette Township, Pa. Contractor: Golden Triangle Construction Owner: Pennsylvania DOT (PennDOT) Engineer: Mackin Engineering Company Divided Highways (Rural) (Silver Award) Interstate-69, Section 4, Greene and Monroe Counties, Ind. Contractor: E&B Paving Owner/Engineer: Indiana DOT Engineers: Beam, Longest & Neff | AECOM (Gold Award) Iowa I-280, Scott County, Iowa Contractor: Cedar Valley Corp. LLC Owner: Iowa DOT Engineer: Mark F. Brandl, Iowa DOT Urban Arterials and Collectors (Silver Award) Midland Drive (SR-108), Roy and West Haven, Utah Contractor: Ralph L. Wadsworth Construction LLC Owner: Utah DOT, Region One Engineer: Horrocks Engineers (Gold Award) Ryan Road (State Trunk Highway 100), Oak Creek, Wisc. Contractor: Zignego Company Inc. Owner: Wisconsin DOT Engineer: CH2M Hill Divided Highways (Urban) (Silver Award) Iowa Highway 30, Linn County, Iowa Contractor: Cedar Valley Corp. Owner: Iowa DOT Engineer: John Vu — Iowa DOT (Gold Award) U.S. 36 Express Lanes from Federal Boulevard to Table Mesa Drive in Boulder, Adams, Weld, and Broomfield Counties, Colo. Contractor: Castle Rock Construction Company Owner: Colorado DOT, Region 1 Engineers: HDR, Inc. | Cesare Inc. About the Excellence Awards The ACPA Excellence in Concrete Pavements awards are made possible, in large measure, because of the generous time commitment of independent judges from across the country. The judges each spend many hours reviewing executive summaries, project details, photographs, and other details and aspects of project submittals. ACPA presents awards in both gold and silver levels. Judging is based on a point system, with independent judges awarding points for quality construction, addressing unique and unusual challenges, innovation, traffic management, and other criteria. In the case of ties, award judges present awards to co-winners. About the American Concrete Pavement Association The American Concrete Pavement Association is the national trade association of the concrete pavement industry. The primary mission of the ACPA is to lead the promotion of concrete paving, and align its members, chapters/state paving association affiliates and partners for effective and valued concrete pavement promotion, advocacy and technical support on behalf of the concrete pavement industry. For more information, call 202/638-2272 or visit www.acpa.org.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

SECTION

Trucks & Trailers Pages 75-81

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Kenworth T680 Advantage Features Optimized Powertrain Kenworth’s new, fuel-efficient T680 52-in. mid-roof sleeper Advantage Package, for regional haul and less-than truckload operations, is now available for order. The latest Kenworth T680 Advantage configuration features an optimized powertrain with either the PACCAR MX13 or PACCAR MX-11 engine, Eaton Fuller Advantage series 10-speed automated transmission, and the new PACCAR Axle. The 52-in. mid-roof sleeper configuration offers new aerodynamic elements including a front air dam, flared-out fairings, lower sleeper fairing extenders and FlowBelow wheel covers that enhance fuel economy by effectively redirecting airflow around the chassis, sleeper and trailer. Other notable fuel-efficiency features are Kenworth’s predictive cruise control, neutral coast, and driver performance assistant. The T680 Advantage Package provides customers running the 52-in. mid-roof sleeper with up to a 6 percent fuel economy benefit compared to a standard Kenworth T680 52-inch mid-roof sleeper running the previous generation of PACCAR MX-13 engine, Eaton Fuller automated transmission, and standard drive axles, according to the manufacturer. “Regional haul and LTL fleets, as well as other truck oper-

The 52-in. mid-roof sleeper configuration offers new aerodynamic elements including a front air dam, flared-out fairings, lower sleeper fairing extenders and FlowBelow wheel covers that enhance fuel economy by effectively redirecting airflow around the chassis, sleeper and trailer.

ators, can now choose from the Kenworth T680 Advantage’s comprehensive line-up of day cab, 52-inch mid-roof and 76inch sleeper configurations for outstanding aerodynamics and fuel efficiency, resulting in reduced operating costs,”

said Kurt Swihart, Kenworth marketing director. The 52-in. mid-roof sleeper is especially well-suited for regional hauling applications — including tank, bulk, flatbed, heavy haul and lowboy — where drivers may spend just two or three nights on the road during a typical week. The sleeper features a liftable lower bunk and upper storage units on the back wall, with ample space for drivers to hang their clothes and jackets, plus an optional upper bunk for driving teams. For driver retention and recruitment, the T680 Advantage with 52-in. sleeper offers an optional passenger swivel seat that expands the living space into the cab to provide even more comfort for the drivers when parked. The design also provides sufficient head room for a driver or passenger up to 6-ft.-4 to easily stand up between the seats. Drivers appreciate the 7 ft. wide cab, reduced interior noise levels, adjustable advanced suspension seats with climate control, air-assisted hydraulic clutch, ergonomic dash, easy-to-use Driver Performance Center, and LED interior lighting. For more information, visit www.kenworth.com.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

See the Future of Clean Energy at Green Truck Summit What does “clean energy” mean for work trucks in 2017 and beyond? The answers can be found at the Green Truck Summit 2017, the alternative fuels and advanced technology conference held in conjunction with The Work Truck Show. Fleet managers, truck equipment distributors, upfitters and truck dealers from around the world learn the clean energy developments and decisions shaping the journey toward the goal of zeroemission transportation, and the future of the work truck industry, at this annual conference. Produced by NTEA — The Association for the Work Truck Industry, the Green Truck Summit takes place at the Indiana Convention Center in Indianapolis, Ind. It kicks off March 14 at 8:30 a.m. with opening remarks and a keynote address; followed by general sessions that run through 5

p.m. Lunch and a networking reception are included. The Work Truck Show 2017 runs March 14 to 17. Educational sessions begin March 14, and the exhibit hall is open March 15 to 17. The Green Truck Summit brings together leading truck manufacturers, governmental and regulatory officials, and fleet management decision-makers to share their experiences, visions and outlook on how the industry can make an immediate impact on greenhouse gas and criteria pollutant reduction. The Work Truck Show and Green Truck Summit offer educational registrants the opportunity to attend concurrent sessions led by these experts over three days, March 14 to 16. “The objective of the Green Truck Summit is to bring together the top people who are leading the thinking and decision-making

about clean energy technologies and fuels, so they can share their thoughts with the industry and generate some real dialog that will help to move things forward,” said Doyle Sumrall, NTEA managing director. The Green Truck Summit 2017 kicks off with a keynote address by Wilfried Achenbach, senior vice president of engineering and technology of Daimler Trucks North America. “Dr. Achenbach is Daimler’s leading authority for technology and truck development, so how he sees the truck industry moving over the next couple of decades is going to be enormously insightful,” said Sumrall. Green Truck Summit general sessions will cover key subjects, including: • Government objectives for zero-emission transportation and

outlook on future policies. • Fuel and technology options paving the path to zero-emission commercial vehicles. • The effects of Phase Two greenhouse gas regulations. • Renewable fuels analysis and vehicle life cycle impacts. • New products and technology applications for fuel use and emissions reductions. Attendees can meet industry suppliers and experience the latest advanced technologies and alternative fuel applications by test-driving or riding in the newest commercial vehicles at the Ride-andDrive March 15 and 16. Participation is free and available on a first-come, first-served basis to all registered Work Truck Show 2017 attendees. No Ride-andDrive registration is necessary. Named one of the top 100 trade

shows in the United States, The Work Truck Show features the newest vocational trucks, vans, vehicle components and equipment from more than 500 exhibitors on an exhibit floor covering more than 500,000 square feet. In addition to participating in the educational program, attendees can get their technical and regulatory questions answered by NTEA staff and see the newest efficiencyboosting products in the Truck Productivity and Fuels Pavilion in The Work Truck Show exhibit hall. Registration for the Green Truck Summit and The Work Truck Show 2017 is available at worktruckshow.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 76 • January 14, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

4 DIESEL OIL CHANGES

$385.

FEDERAL DOT VEHICLE INSPECTION

$98.

FOR SYSTEMS 7 QT OR LESS. INCLUDES OIL, FILTER, DISPOSAL, AND MULTIPOINT INSPECTION.

IN THE BUSINESS OF DOING BUSINESS? NOW NEWLY AVAILABLE HERE AT FURY DODGE RAM OF LAKE ELMO FOR YOUR COMPLIANCE NEEDS FOR MINNESOTA AND WISCONSIN.

RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE INFORMATION.

5550 SERIES TRUCKS AND SMALLER. NOT AVAILABLE FOR AIR BRAKE APPLICATIONS. OTHER RESTRICTIONS MAY APPLY, CONTACT YOUR SERVICE ADVISOR FOR MORE DETAILS.

Jeff Leonard or Dale Coggin Service Department

Fury Dodge Ram of Lake Elmo, Minnesota 651-256-8125 • Visit us at furymotors.com

TEXTING AND DRIVING MAKES GOOD PEOPLE LOOK BAD. STOPTEXTSSTOPWRECKS.ORG

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • January 14, 2017 • Page 77

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857

K.C. Bobcat

McCann

2209 SW US Hwy. 40 Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001 www.kcbobcat.com

Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Willmar 1515 West litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

Transwest Truck Trailer RV 17327 S Outer Road Belton, MO 64012 816-454-7340 Fax: 816-454-7837 www.transwest.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 • Fax: 812-421-1036 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 • Fax: 812-299-3687 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 • Fax: 618- 242-9161 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 • Fax: 270-781-0907 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 • Fax: 615-641-1108 www.diamondequipment.com

Ziegler CAT

RDO Equipment Co.

8000 County Road 101 East Shakopee, MN 55379 800-352-2812

Burnsville, MN 952-890-8880 Rochester, MN 507-282-8888 North Mankato. MN 506-387-1836 Marshall, MN 507-532-0994 Sauk Rapids, MN 320-259-6222 Moorhead, MN 701-526-2200 Bismarck, ND 701-223-5798 Dickinson, ND 701-483-0115 Grand Forks, ND 701-772-4842 Minot, ND 701-852-3962 Williston, ND 701-577-0736 Aberdeen, SD 605-225-6772 Sioux Falls, SD 605-336-2730 Rapid City, SD 605-348-1566 www.rdoequipment.com

13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Page 78 • January 14, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

2016 Ram 1500 Bay Bridge Cube

2017 1500 Laramie

Winter Special $41,513*

Winter Special $33,988*

Winter Special $44,162*

2016 Pro Master Ram 1500

2016 Ram 3500

2016 2500

w/Upfit Kits Included Valued at $4,760

with Flatbed

6.7L Diesel

Winter Special $30,417*

Winter Special $32,583*

Winter Special $54,398*

Crew Cab 4x4,

Must Finance Thru Chrysler Financing

2016 3500 w/Snow Removal Package Including 9’ Rugby and Hiniker Poly Scoop Plow Upfit Package Included Valued at $6750

2016 Tradesman 3500

2015 Ram 5500 Plow Ready

White Dually

w/11 1/2’ Stainless Steel Dump Body

Winter Special $59,148*

Winter Special $46,698*

Winter Special

#1 Chrysler Corp. Commercial Dealer in Minnesota

RAM H.D. HEADQUARTERS

The fast lane for small business.

If we don’t have it, we’ll build it for you!

Fury Ram Truck Center, Lake Elmo, Minnesota 651-777-1316 • Visit us at furymotors.com

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters Ready to Go!

* Pricing represents all Denver business center rebates deducted!

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • January 14, 2017 • Page 79

+ PLUS CURRENT

SCHEDULED MAINTENANCE1

+ PLUS

2-YEAR/24K

UPFIT CASH

Stack up and save with the new 2017 Business Choice Program! The 2017 Business Choice Program is geared toward providing business owners the best value on vehicles that run your business. Purchase or lease an eligible Chevrolet vehicle and get the new 2-year/24,000-Mile Schedules Maintenance Program1 and stack on any of our Business Choice offers, like the Uplift Cash Allowance2 or the GM Accessory Cash Allowance,3 to save more. You can also add current retail offers to this equation to make it a deal you can’t pass up. Purchasers of 2014-2015 vehicles are eligible for the 2-year/30,000-mile Business Maintenance Program7 along with the Uplift Cash Allowance2 or the GM Accessory Cash Allowance.3 Learn more at gmfleet.com/business-choice-offers.

OFFERS

Page 80 • January 14, 2017 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Transfer Flow⁄

Tank Nearly Doubles Stock Fuel Capacity Transfer Flow, a leader in aftermarket fuel tank systems, has introduced a 50-gal. highcapacity replacement fuel tank for the 2016 Nissan Titan XD diesel truck. The Transfer Flow 50-gal. midship replacement tank will provide Nissan Titan XD owners with nearly double the fuel capacity and driving range over its stock 26-gal. tank. Transfer Flow’s Nissan Titan XD high-capacity replacement tank is available from the company through its web site at www.transferflow.com or by calling 800/826-5776. It also can be purchased through one of the company’s hundreds of dealers in the United States, Canada and Australia. The fuel tank comes complete with everything needed for installation and use, including straps, mounting hardware and easy-to-follow illustrated instructions for installing the tank. Installation can be done in a couple of hours by the customer, a qualified mechanic or one of Transfer Flow’s 320+ authorized installers listed at www.transferflow.com/installation. The tank is constructed from high-yield domestic 12gauge aluminized steel and powder-coated for a durable satin black finish, ensuring strength, durability and superior corrosion resistance. Like all its aftermarket fuel systems,

The Transfer Flow 50-gal. midship replacement tank will provide Nissan Titan XD owners with nearly double the fuel capacity and driving range over its stock 26-gal. tank.

this new offering for the Nissan Titan XD comes with Transfer Flow’s 6-year unlimited mileage warranty. Nissan’s Titan XD made news in 2016 with the launch of its 5.0-L Cummins turbodiesel-powered trucks that aimed to redefine what qualifies as a heavy duty truck. But as owners put the Titan XD’s 310 hp and 555 lb.-ft. of toque to the test, hauling or pulling heavy loads, mileage and driving range will suffer. Enter Transfer Flow, which improves the truck’s driving range and allows drivers to stop to refuel less often and be more selective about where they purchase fuel and at what prices they do so. For more information, call 800/826-5776 or visit www.transferflow.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

McNeilus Truck & Manufacturing Inc. Reveals Mixer ‘Flex Controls’ System McNeilus Truck & Manufacturing Inc. revealed its new mixer controls platform during the Command Alkon User Conference in Atlanta, Ga. McNeilus FLEX Controls are one of the most advanced control systems in the industry, with flexibility to meet any concrete producer’s needs, according to the manufacturer. “McNeilus FLEX Controls are the ‘brains of the operation.’ They are the new nerve center that meets the demands of your job today and seamlessly upgrades for the demands of tomorrow. Whether it’s simple reliability or complex precision, our flexible system lets you add or take away functionality to meet your needs — so you can focus on getting the job done right,” the manufacturer said. McNeilus FLEX Controls consolidate complete mixer monitoring onto one screen. With the new control system users have better control and less variability in loading, mixing, and delivering. The new smooth drum stop technology offers the smoother transi-

AIS Construction Equipment Corporation www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750

Ditch Witch of North Dakota www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636

McNeilus Bridgemaster featured outside the Westin hotel in Atlanta, Ga., for the Command Alkon Conference.

tions from charge to discharge and stop/start. “The new McNeilus FLEX Controls is a system that I have worked closely on with our development team. The key to this system is the flexibility,” said Tom Harris, vice president of concrete mixers of McNeilus Truck & Manufacturing Inc. “You can configure a simple system for one producer and an advanced system for technology driven producers.” The launch of McNeilus FLEX

Controls included an executive briefing to industry leaders, a featured McNeilus Bridgemaster mixer outside the conference hotel, two general sessions with truck walkarounds, and a fully functioning in-booth display for attendees to test out the new system. For more information, visit www.mcneiluscompanies.com/.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

Mankato, MN • 800-321-PLUS

www.toppersplus.com 1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • January 14, 2017 • Page 81

www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

CLASSIFIEDS

Page 82 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AERIAL LIFTS Platform Lifts

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

Doosan DX225, s/n 7052, Excavator with shear hydraulics, good condition, 1,800 hrs.................. $99,000.

2006 JLG 660SJ Aerial Lift, Cat 3044C 63.3 HP diesel, 66' platform height, 4WD, 4 wheel steer, 8' basket, 15x19.5 tires, 45% gradability, 26,300 lbs., 2,800 hrs.................. $32,500.

Doosan DX225, s/n 7052, Shear hydraulic to end of stick, 48'' bucket, good condition, 1,800 hours.............. $97,000.

Illinois Truck & Equipment 815-941-1900

2012 Kobelco SK210-8E, A/C, 150HP, Tier 3 Diesel, 32'' pads, 9'8'' stick, 22' dig depth, Aux hydraulics, extra hydraulic rotation valve, pattern control, 1,196 hrs.................. $98,500.

ASPHALT EQUIPMENT Asphalt Rollers 2009 Volvo SD70 Smooth, 66'' Vibratory smooth drum compactor, canopy, Kubota V3800, 100 HP, 14.9 - 24 tires, 16,350 lbs., 635 hours.......... $42,500. Illinois Truck & Equipment 815-941-1900

EXCAVATORS

Gibson Machinery, LLC 440-439-4000

MATERIAL HANDLERS Material Handlers '04 Sennebogen 825M-D, Hyd. cab, 825.0.1255, 45' reach, mag box (15RW), Fair condition, 9,000 hours............ ................................ $160,000. Gibson Machinery, LLC 440-439-4000

Illinois Truck & Equipment 815-941-1900

Get the latest news

LOADERS Skid Steer Loaders 2012 JCB 135, Skid Steer, Cab with heat, 66'' Bucket, Good condition, Low hours (295)...... .................................. $19,900.

Hydraulic Excavators

Casey Equipment 224-200-4211

BusinessCalendar

Visit CEG’s Web Site at www.construction equipmentguide.com

contact

AGC

703/548-3118,

AGC (Associated General Contractors) Event: Construction Project Manager Course Dates: Sunday, January 29, 2017 to Friday, February 3, 2017 Place: Atlanta, Georgia Training/Professional Development For more information, contact AGC at 703/548-3118, www.AGC.org.

Nebraska Land Improvement Contractors Association 58th ANNUAL NLICA CONVENTION DATES: JANUARY 17 – 19, 2017, 6:00 PM PLACE: Holiday Inn Convention Center, Kearney, NE For additional information visit www.NELICA.org Missouri Land Improvement Contractors Missouri LICA Winter Convention Dates: January 26 - 28, 2017 Place: Hilton Garden Inn, Columbia, MO For more information, contact: Missouri LICA State Office Deb Dickens, Executive Director 1101 West High Street, Jefferson City, MO 65109 Phone: 573/634-3001 • Email: MLIA@aol.com AGC (Associated General Contractors) of Minnesota STP CLASSES Supervisory Training Program (STP) classes for November – December will start the week of November 7. For additional information, contact Renee Horsman at rhorsman@agcmn.org AGC (Associated General Contractors) of Minnesota Once again, we will be collecting for Toys for Tots at the holiday reception. New toys, games, and books, as well as cash and checks, will be greatly appreciated. Checks should be payable to “Toys for Tots.” There will also be cash jars available at the reception. Checks can also be mailed in advance of the reception to Denise Woods at the AGC office. Denise Woods, AGC of Minnesota, 525 Park Street, #110, St. Paul, MN 55102. AGC (Associated General Contractors) Event: AGC’s Safety & Health Conference Dates: Wednesday, January 25, 3017 to Friday, January 27, 2017 Place: Fort Lauderdale, Florida Safety and Health For more information, contact AGC at 703/548-3118, www.AGC.org. AGC (Associated General Contractors) Event: 2017 Conference on Surety Bonding Construction Risk Management Dates: Monday, January 30, 2017 to Wednesday, February 1, 2017 Place: Naples, Florida

online.

Risk Management For more information, www.AGC.org.

To view our Business Calendar online, go to www.constructionequipmentguide.com.

and

AGC (Associated General Contractors) Event: AGC’s 98th Annual Convention Dates: Tuesday, March 7, 2017 to Thursday, March 9, 2017 Place: Las Vegas, Nevada Cultivate, Innovate, Accelerate Make your plans to attend the 98th Annual AGC Convention and seize your opportunity to cultivate new ideas and partners, see and hear about the latest in construction innovation, and leave with the tools to accelerate your business to the next level. The 2017 Convention features a packed program focused on sharing solutions from experienced contractors and industry experts on key construction issues, networking events structured so you can make valuable new connections, and opportunities to shape the future of the construction industry and the association. The AGC Annual Convention is your best opportunity to enhance your business and advance your career. For more information, contact AGC at 703/548-3118, www.AGC.org. A GREEN EVOLUTION ONLA (Ohio Nursery & Landscape Association) is proud to announce the launch of MGIX (Midwest Green Industry Xperience), formerly known as CENTS. MGIX will combine industry-leading education with an expanded tradeshow offering to provide an innovative green industry experience. PLACE: GREATER COLUMBUS CONVENTION CENTER COLUMBUS, OHIO DATES: JANUARY 16 – 18, 2017 Let’s face it: our industry is evolving, and we are too. MGIX has been redesigned to provide greater value for nursery and greenhouse growers, retail garden centers, landscape architects, designers and contractors, turf and pest management professionals and arborists. This conference includes a tradeshow, education sessions, pre-conference workshops, and special events. Construction Association of Michigan Michigan Construction & Design Tradeshow 2017 DATE: FEBRUARY 1, 2017 PLACE: MotorCity Casino Hotel, Detroit, Michigan Show HOURS: 9:00 AM to 4:30 PM The Construction Association of Michigan (CAM), Bloomfield Hills, is pleased to announce that the Michigan Construction & Design

Would you like

YOUR COMPANY featured in Construction Equipment Guide? If so, please contact us:

470 Maryland Drive, Fort Washington, PA 19034

DO YOU HAVE A FEW PIECES OF HEAVY EQUIPMENT TO SELL?

$40

ONLY

Construction Equipment Guide is THE Place to List It!

2 INSERTIONS IN ONE REGION (Northeast, Southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

Call 800-523-2200

You must have a classified print ad to do so.

or go online to place your ad

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

Tradeshow will be returning to MotorCity Casino Hotel in Detroit, Michigan. This one-day tradeshow will be held on February 1, 2017, and will be attended by over 1,000 construction owners, contractors, suppliers, architects and engineers. Show hours are 9:00 AM to 4:30 PM. For more information with regard to this Tradeshow, contact Construction Association of Michigan, 43636 Woodward Avenue, Bloomfield Hills, MI 48302. Telephone is 248/972-1000.

NATIONAL PAVEMENT EXPO 2017 – REGISTER TODAY! DATES: FEBRUARY 1 thru FEBRUARY 4, 2017 PLACE: MUSIC CITY CENTER, NASHVILLE, TN ALL-NEW LEADERSHIP BOOT CAMP – JANUARY 31 Four reasons to attend National Pavement Expo: Packed Exhibit Hall 50+ Conference Sessions lead by construction industry experts covering team development, employment issues, finance, selling, safety, AGC’s 2017 Conference management and training Surety Bonding and Construction Risk Management All-New Leadership Boot Camp for owners and employee leaders, TYPE: CONFERENCE/EXPO presented on Tuesday, January 31. DATES: JAN. 30, 2017 (12:00 AM CT) to FEB. 1, 2017 Nashville from the sights to the sounds, Music City is packed with (12:00 AM CT) things to do! LOCATION: NAPLES, FLORIDA Register now and plan your trip to get the best deals on conference WEB SITE: http://meetings.agc.org/risk/ sessions, hotels and airfare. For more information, call 920/542This conference serves and supports everyone playing a senior role 1131 or toll-free at 800/538-5544. National Pavement Expo, AC in construction risk management. That includes all senior executives Business Media, 201 N. Main Street, Fort Atkinson, WI 53538. of the construction companies in the AGC family, and particularly the in-house lawyers and risk managers for these companies. 2017 Specialized Transportation Symposium Scheduled for February 14 – 17 in Orlando, Florida 2017 OREGON LOGGING CONFERENCE The Specialized Carriers & Rigging Association (SC&RA) will host the PLACE: LANE COUNTY EVENTS CENTER and FAIRGROUNDS Specialized Transportation Symposium, February 14-17, 2017 at the EUGENE, OREGON Hilton Orlando Lake Buena Vista in Orlando, Florida. Attendance at DATES: FEBRUARY 23, 24, and 25, 2017 this annual event increases every year, and the 2017 Symposium is WHY SHOULD YOU ATTEND? expected to attract 500 specialized carriers, state and federal governTwo Days of Business Sessions ment officials, researchers, manufacturers & suppliers to the industry. Over 26 Quality Speakers The Specialized Carriers & Rigging Association (SC&RA) is an inter18 Industry Related Topics national trade association of more than 1,300 members from 46 Earn Pro Logger and SAF Credits nations. Members are involved in specialized transportation, Enjoy Social Events machinery moving and erecting, industrial maintenance, millwrightSaturday Fun Family Activities ing and crane and rigging operations, manufacturing and rental. For Members Competitions more information, contact the Specialized Carriers & Rigging CALL 541/686-9191 FOR MORE INFORMATION! Association at 5870 Trinity Parkway, Suite 200, Centreville, VA 20120. Phone: 703/698-0291. Fax: 703/698-0297. Email: Concrete Sawing & Drilling Association (CSDA) to Meet in Puerto info@scranet.org. Rico for the First Time CSDA is heading to beautiful Puerto Rico for the association’s 45th ASSOCIATED GENERAL CONTRACTORS Annual Convention & Tech Fair. AGC’s 98th ANNUAL CONVENTION Dates: March 14-18, 2017 DATES: Tues., MARCH 7, 2017 to Thurs., MARCH 9, 2017 Puerto Rico is an ideal location for industry professionals to meet, LOCATION: Las Vegas, Nevada network and relax – a tropical island paradise that remains part of Cultivate, Innovate, Accelerate – Register Now & Save, Early the U.S. and is easily accessible for American and international trav- Registration Deadline: November 30, 2016. elers. Make your plans to attend the 98th Annual AGC Convention and seize CSDA has chosen the luxurious Gran Melia Resort as the convention your opportunity to cultivate new ideas and partners, see and hear venue – a highly sophisticated architectural gem nestled on Puerto about the latest in construction innovation, and leave with the tools Rico’s northeastern coast in Coco Beach, Rio Grande. The CSDA to accelerate your business to the next level. The 2017 Convention Annual Convention is attended by owners, managers and operators features a packed program focused on sharing solutions from expefrom concrete cutting, polishing and imaging companies as well as rienced contractors and industry experts on key construction issues, representatives from manufacturers and distributors who support the networking events structured so you can make valuable new connecindustry with products and services. Anyone who falls into these cat- tions, and opportunities to shape the future of the construction indusegories should join CSDA for this important networking event. try and the association. The AGC Annual Convention is your best Registration opens September. For more information, visit opportunity to enhance your business and advance your career. For www.csda.org/convention, call 727/577-5004 or email more information, contact AGC of America at 703/548-3118; info@csda.org. communications@agc.org; www.AGC.org.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 83

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180 Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color.

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................ Call

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us

27-1 TM

• Your ad will run for two consecutive issues in 1 region.

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 1-2 EB 614-395-4064

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

For more information, call Construction Equipment Guide today at 800/523-2200

2004 Takeuchi TL140, 2546 Hrs, Cab & Heat............ ..........................................................................$26,166 Top Notch Equipment, Inc. 888-824-6559 1-2 PK

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 1-2 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 1-2 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 1-2 DH

1995 Fiatallis FR130.2, Cab w/Heat, 139 HP Turbo Diesel............................................... $24,250 1-2 JM Call Steve 262-373-2151

2010 Link-Belt 350 X2, Cab w\AC, 10’8” stick with 36’8” reach and 24’1” dig depth............... $104,600 Call Steve 262-373-2151 1-2 JM

2014 Takeuchi TL10, 92 hp T4i Kubota Diesel, 2 speed travel, aux hydraulics.......................$41,010 Call Steve 262-373-2151 1-2 JM

2015 Kawasaki 70Z7, 168 hp Cummins, JRB coupler, cab w/AC.......................................... $149,000 Call Steve 262-373-2151 1-2 JM

2004 Kenworth T300, 195K, C7, 250HP, with an 11' Dump Bed............................................. $39,750 Call Dave at REED Company 1-2 JM 620-340-7953

2002 International 2674, 244K, DT530, 330HP, 8spd, with 16' Barrel Bed .......................... $54,500 Call Dave at REED Company 1-2 JM 620-340-7953

MK MARTIN 86HSEL SKID STEER BLOWER, 86” 23-26GPM..............................................$4,450 Call Tim 1-2 PK 651-437-3531

2000 Mustang 2042, 3350 Hours................$9,950 Call Tim 1-2 PK 651-437-3531

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, Quick Coupler.......................................................... $135,000 Caleb Hinkkanen 800-456-4005 Ext. 143 1-2 PK

2006 Cat XQ-80 Generator, 8146 Hrs........... $19,000 Albert Medcalf or Marcela Newman 1-2 EB 502-456-4050

2010 Bobcat E80, 3565 Hrs, 57 HP, 2-Speed Drive, 18” Digging Bucket, 24” Digging Bucket......... $49,500 Call George 219-696-8911 1-2 JM

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

2014 Terex TSV70 Skid Steer Loader, Vertical Path, 74hp, 2-Speed, Hyd-Quick-Tach 129” Hinge........ $36,600 1-2 EB Call Tania 614-443-9751 x237

Page 84 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $120 • Color $180

2006-2010 Ingersoll Rand DD-118HF & DD-138HF 1999 Dynapac SP-CC-102 Dual Drum Vibratory 2012 Volvo MT2000 Milling Machine, Cummins Roller, #7137.............................................. .$6,500 610HP Tier 3 Dsl, 86” Keystone Cutter.... $275,000 Compactors, Various Units to Choose From! 1-2 JM 1-2 JM 800-283-1336 1-2 JM 800-283-1336 800-283-1336

2009 Volvo MW500 Milling Machine, 20” Wide Cutter, Deutz Diesel Eng, Rear Conveyor.$115,000 1-2 JM 800-283-1336

2013 Cat D6K2 LGP, s/n T00253, 4887 Hrs, Enclosed Cab, Heat, A/C, GPS Ready, Air Ride Seat, 12’ PAT Blade, Rear Screen, SystemOne U/C 30” Shoes.......................................... $115,000 1-2 JM Call David 219-696-5680

2012 Pete Equipped w/Rear Mount National 9125 WA-WL, 26 Ton, 125’ Main Boom, 500 HP Cummins, 10 Speed Eaton Transmission, 18’ Bed, Steerable Lift Axle, 39,000 Miles, 5150 Hrs, Cleveland, Ohio............................................. CALL Call Andy Forepaugh 216-316-1511 1-2 EB

2001 Grove TMS 500E, 40 Ton, 95’ Main Boom, 26’-45’ Jib, 3 Sheave Block, 68,000 Miles, 10,112 Hrs, 1 Owner Machine, Fresh Grove Paint, Cleveland, Ohio............................................. CALL Call Andy Forepaugh 216-316-1511 1-2 EB

2006 Case 580SM, s/n N6C412119, 4600 Hrs, Cab w/Heat & AC, 4WD, Ext-Hoe, Ride Control, Two Lever, 82” Bkt, 12” and 24” Bkt...........$40,500 1-2 JM Call Dennis 630-774-8830

2006 Doosan Solar225LC-V with Cab, A/C, 2,205 hrs...............................................................$57,500 1-2 JM Call Mark 785-823-6378

Case 580L, s/n JJG0247133, Cab w/Heat, Two Lever, Ext-Hoe, 4WD, 18” Backhoe Bkt, 82” Front Bkt.............................................................. $23,500 1-2 JM Call Steve @ 630-878-8765

2009 Cat 420E, County Machine, Cab, A/C, 4-in-1 Loader........................................................ $55,000 Call Mark 785-823-6378 1-2 JM

2012 Case DV202, DDDDV202NCTF2016, 1175 Hours, Rops, Right side Drive Lever, 47" Drum....... $24,900 1-2 JM Call Mark @ 630-739-7770

Here's how the BARGAIN ADS Work:

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $120 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition................................ $49,500 Call Tim 630-665-5600 1-2 JM

SEE YOUR BARGAIN AD IN

COLOR

ONLY $60 EXTRA FOR TWO INSERTIONS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 85

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: AIR COMPRESSOR WANT TO BUY: USED OR REBUILT AIR COMPRESSOR FOR ATLAS COPCO ROC L8 DRILL EQUIPPED WITH A CAT C13 ENGINE. ATLAS COPCO PART NUMBER: 9822199555 CONTACT: STRICKLAND EQUIPMENT CO. PH: 972-713-0208 EMAIL: MIKEBERRY@ STRICKLANDEQUIPMENT.COM FAX: 972-713-6206 –––––––––––––––––––––––––––––––– WANTED: SWEEPS FOR CASE 1150E SET OF SWEEPS FOR CASE 1150E CONTACT: JOHN RATLIFF PH: 276-608-1507 EMAIL: CMESALES@BVU.NET FAX: 276-591-1239 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE EQUIPMENT JOHN DEERE 544K OR J. UNDER 5000 HRS. MUST HAVE HYDRAULIC COUPLER. JOHN DEERE 700K LT OR XLT. UNDER 1000 HRS. PAT BLADE. RIPPER OPTIONAL. PLEASE SEND PICTURES, BEST PRICE AND LOCATION FOR FREIGHT. THANKS IN ADVANCE. CONTACT: CALEB COLBORN PH: 208-757-3564 EMAIL: CALEB@DOUBLEEDGE EQUIPMENT.COM –––––––––––––––––––––––––––––––– WANTED: GENERATOR (SCRAPPED OR SOLD FOR PARTS) LOOKING TO HAVE OUR GENERATOR SCRAPPED OR SOLD FOR PARTS. PHILADELPHIA, PA CONTACT: TED MCKEON PH: 215-885-2900 EMAIL: WEB@CEGLTD.COM –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA1100 NEED 4 KOMATSU WA1100'S THAT ARE 3-5 YEARS OLD WITH LESS THAN 10,000 HOURS CONTACT: KEATON CABLE PH: 864-295-7907 EMAIL: KEATON.CABLE@AMECO.COM –––––––––––––––––––––––––––––––– WANTED: NATURAL GAS GENERATOR NATURAL GAS GENERATOR 2 MW 50HZ, QUANTITY 1. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON (PH: 864-574-0404) EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 892E LC EXCAVATOR WITH THUMB CONTACT: TIM BAGWELL (PH: 334-735-2464) EMAIL: BCSLLC3125@GMAIL.COM FAX: 334-735-5402 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 330BL WANTED TO BUY CAT EXCAVATOR 330BL 1997 TO 2001 MODEL. IF YOU HAVE ANY FOR SALE, PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESAERA (PH: 832-528-0786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 281-727-0415 ––––––––––––––––––––––––––––––––

WANTED: LOOKING TO BUY DOOSAN DAEWOO 140WV LOOKING FOR DOOSAN DX140W YEAR 2002-2006, DAEWOO SOLAR 130WV, 140WV, 180WV, 160WV, 170W-III. IF YOU HAVE ANY ONE OF THESE THEN PLEASE CONTACT ME. CONTACT: HAMMAD KHAN (PH: 3149984807) EMAIL: SALES.INTLBROKERS@GMAIL.COM FAX: 3149984807 –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS. WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES) . WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: KOEHRING 505 BACKHOE LOOKING FOR KOEHRING 505 BACKHOE FOR PARTS, RUNNING OR NOT, ALSO INTERESTED IN OLD PARTS INVENTORY FOR 505. CONTACT: ALBERT HARLOW (PH: 267-738-5984) EMAIL: HARLOWCONTRACTING@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: GRAPPLE VOLVO 360 EXCAVATOR GRAPPLE FOR VOLVO 360 THAT HOOKS TO VOLVO S2 QUICK COUPLER CONTACT: KEVIN SANSALONE (PH: 856 692-0027) EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– WANTED: NEEDED TRUCK 830 E KOMATSU 2011 AND UP 5 TRUCK 793D CORE 40000 HOURS AND UP BUDGET 215000.00US NOT MORE AFTER NEEDED TRUCK KOMATSU I NEED 10 TRUCK 830E 2011 AND UP UNDER 12000 HOURS BUDGET 615000.00US EACH FROM USA ONLY NOT ADVERTISED ONLY DIRECTLY NO SALEMAN NO INTERNET OR PAST MINING ONLY CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WANTED:DEERE ENGINE CORES NEED DEERE 6414 AND 6068 ENGINE CORES AND PARTS ENGINES WITH VEE BELT DRIVE CONTACT: SANDY LAKE DIESEL (PH: 724 253 3450) EMAIL: SANDYLAKEDIESEL@GMAIL.COM FAX: 724 253 4394 ––––––––––––––––––––––––––––––––

WANTED: KOMATSU HD605-7 WANT TO BUY 5 KOMATSU HD605-7 2008 AND UP MODEL WITH LOW HOURS IF YOU HAVE ANY PLEASE EMAIL ME PICTURES AND DETAILS. WHOLESALE PRICE ONLY!!! CONTACT: ABDAL HAJI SALEEM (PH: 415-687-0337) EMAIL: HAJICONSTRUCTEST@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: WANT TO BUY CONSTRUCTION MACHINE OUR COMPANY WANT TO BUY CONSTRUCTION MACHINES, IF YOU HAVE ANY KIND OF MACHINE PLEASE OFFER ME. DOOSAN DX14W - VOLVO 135W, 145W HITACHI EX100WD- DAEWOO SOLAR S130W, S140W, SAMSUNG MX135 DYNAPAC, 251D,252D, 301D, 302D CONTACT: EJAZ AHMAD (PH: 3008859412) EMAIL: GEOIMPEX.EJAZ@GMAIL.COM FAX: 3008859412 –––––––––––––––––––––––––––––––– WANTED: CAT MOTOR GRADER 140G I AM LOOKING TO BUY CAT MOTOR GRADERS 140G.IF YOU HAVE FOR SALE. PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: NAQIB KHAN (PH: 03458818803) EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D10T BULLDOZER D10T ENC CAB WITH RIPPER UNDER 3000 HOURS USA ONLY AFTER I HAVE BULLDOZER D11T 2010 WITH UNDER 3000 HOURS I NEED 620,000.00NEG CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: MEDIUM DUTY TRUCK FREIGHTLINER M2 26K GROSS VEHICLE WEIGHT AUTOMATIC TRANSMISSION AIR BRAKES CONTACT: KEVIN MANGANARO (PH: 302 225 7276) EMAIL: KMANGANARO@BAYSHORETRUCKS.COM FAX: 302 652 5358 –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA320-5 CLEAN WORK READY MACHINE WITH 5000 OR LESS HOURS DASH 5 ONLY MACHINE CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: SMALLER ENCLOSED TRAILER NEED A SMALLER ENCLOSED UTILITY/SPORT TRAILER 1000- 1500 LB. CAPACITY TOTAL CONTACT: DIANE LAMBRO (PH: 973-875-7181) EMAIL: DIANE@STANDARDELEVATORCORP.COM FAX: 973-340-8458 ––––––––––––––––––––––––––––––––

WANTED: JOHN DEERE 595D I AM LOOKING TO BUY JOHN DEERE 595D EXCAVATOR IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– CRANE PARTS FOR ALL TYPES OF CRAWLER CRANES, AMERICAN, TEREX, MANITOWOC, LINK BELT, BUCYRUS ERIE, CONTACT: DAVE ANTONELLI PH: 216-531-8000 EMAIL: ACREQUIPMENT@CS.COM FAX: 216-531-8852 –––––––––––––––––––––––––––––––– WANTED: AIR ASSIST STEERING LOOKING FOR AIR ASSIST STEERING WANTED: CATERPILLAR 330BL FOR B MODEL MACK OR ANY OTHER CAT EXCAVATOR 330BL IF YOU HAVE ANY PLEASE SEND PHOTOS & DETAILS. TRUCK CONTACT: ROBERT CARTER CONTACT: ABDAL HAJI SALEEM PH: 610-377-0372 (PH: 415-687-0337) EMAIL: CARTER5586@YAHOO.COM EMAIL: –––––––––––––––––––––––––––––––– HAJICONSTRUCTEST@GMAIL.COM WANTED: NEEDED TRUCK 793D CORE FAX: 96663312326 FAST. NEEDED TRUCK 793D I NEED 10 –––––––––––––––––––––––––––––––– WANTED: CELLULOSE FIBER AT 12 BUT MUST BE NOT ADVERTISED MANUFACTURER I NEED TRUCK 793D CORE ONLY BLOWER COOL MACHINE AND CONTACT: JEAN MAURICE BOUTIN BAGGER AND PLANT PH: 1-450-346-8975 OR 1-514-386-8975 CONTACT: GARRY EMAIL: JEANMAURICEBOUTIN@ EMAIL: GARRY@ECOFIBRA.NET VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DOOR FOR 161 KUBOTA MINI –––––––––––––––––––––––––––––––– WANTED: LOG SKIDDER EXCAVATOR NEED COMPLETE DOOR FOR 2008 161 JOHN DEERE SKIDDER 340,440,540 KUBOTA MINI EXCAVATOR. MUST BE IN GOOD SHAPE CONTACT: ROBERT CONTACT: JOHN (PH: 828-837-8986) EMAIL: BLOSSBURGGRANDPA@ EMAIL: TFREALTY@DNET.NET GMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: SNOW WING FOR JOHN DEERE 772G OR 872G MOTORGRADER WANTED: PARTS WE ARE LOOKING FOR A SNOW WING FLOOR PANELS FOR CAT 922B 94A FOR A JOHN DEERE 772G OR 872G CONTACT CHRIS 201 370 5170 MOTORGRADER. PLEASE FORWARD CONTACT: CHRIS COLABELLA DETAILS, PHOTOS AND ASKING PRICE. (PH: 201 370 5170) CONTACT: MARK OR JOHN EMAIL: CCOLABELLA@VERIZON.NET (PH: 519-686-1123) FAX: 201 939 9059 EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: WANT TRACTOR FARM \WANTED: BOMAG BW24R PARTS INTERNATIONAL 1468 LOW HOURS PLEASE CONTACT ME BY MY EMAIL. WANT TO BUY TRACTOR FARM INTERWE HAVE A BOMAG BW24R PARTS NATIONAL 1468 ONLY UNDER 4000 NEED TO PURCHASE. PLEASE CONHOURS ORIGINAL I PAY UNDER 4000US TACT ME AS SOON AS POSSIBLE. CONTACT: JEAN MAURICE BOUTIN THANKS. CONTACT: HONGYA (PH: 1 450 346 8975 OR 1 514 386 8975) (PH: 15901559975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA EMAIL: JLW0001@126.COM –––––––––––––––––––––––––––––––– FAX: 010-69297410 WANTED: CAT 953D OR 963D WASTE –––––––––––––––––––––––––––––––– HANDLER CRAWLER TRACTOR WANTED: HITACHI EX200 AND EX400 I AM LOOKING TO BUY HITACHI EX400 WE ARE LOOKING FOR CAT 953D OR AND EX200 IF YOU HAVE ANY FOR 963D WASTE HANDLER CRAWLER SALE PLEASE EMAIL ME PICTURES TRACTORS. PLEASE FORWARD AND DETAILS. DETAILS, PHOTOS AND ASKING PRICE. CONTACT: RIZ SUNESARA CONTACT: MARK OR JOHN (PH: 8325280786) (PH: 1-519-686-1123) EMAIL: RIZ@MEGAEQUIPMENTS.COM EMAIL: SALES@MARCELEQUIPMENT.COM FAX: 2817270415 –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: 24.00-29 TIRES LOOKING FOR 2 24.00-29 TIRES FOR CAT 80 SCRAPER CONTACT: DEAN JOHNSON (PH: 612-759-9491) EMAIL: DEANAJOHNSONINC@GMAIL.COM FAX: 218-945-6511 –––––––––––––––––––––––––––––––– WANTED: NEEDED BULLDOZER D11T CD «2« BULLDOZER D11T CD «OR CARRIAGE DOZER ONLY« WITH RIPPER UNDER 8000 HOURS FOR BIG JOB NOT ADVERTISED PLEASE ONLY CARRIAGE DOZER 2013AND UP CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CASE 450 CRAWLER COMPLETE STONE GUARDS LOOKING FOR USED SET OF BOTTOM ROCK GUARDS FOR 450 CASE CRAWLER LOADER SER.NO. 3062213 CONTACT: ROGER (PH: 5706393058) EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED: VSI CRUSHER PORTABLE OR STATIONARY BARMAC OR REMCO VSI CONTACT: JOE (PH: 724-944-5569) EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– WANTED: JENBACHER GAS GENERATOR JENBACHER GAS GENERATOR 1400 KW 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON (PH: 864-574-0404) EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: CAT MOTOR GRADER 140G ORIGINAL PAINT, NO CRACKS OR WELDS, MUST HAVE RIPPER CONTACT: WASIM KHAN (PH: 832-533-1929) EMAIL: MWASIEM@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: USED GENERATORS USED DIESEL GENERATORS RÉNTAL TRAILER AND STANDBY CONTACT: FELUX (PH: 786 603 3060) EMAIL: EQUIPSALES2016@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: DYNAPAC ROLLER CA 251D, 301D, CA262D, AND CA362D CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 8325280786 –––––––––––––––––––––––––––––––– WANTED: CAT HYDRAULIC PULL TYPE SCRAPER WANTED CAT 463 SCRAPER CONVERTED TO HYDRAULIC CONTACT: GEHRING GROUP INC (PH: 513-582-3874) EMAIL: GEHRINGGROUP@GMAIL.COM ––––––––––––––––––––––––––––––––

Page 86 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Columbus (Delaware), OH Sat., January 14, 2017 For: Very Late Model Rental Fleet Construction Equipment • Birmingham, AL Fri., January 20, 2017 For: Complete Liquidation Very Large Bridge Contractor • Queretaro, Mexico Fri., January 27, 2017 For: Late Model Construction Equipment & more • Winter Garden, FL January 28 – February 5, 2017 For: 24th Annual 9-Day Florida Auction • Las Vegas, NV Wed., March 8, 2017 For: Late Model Rental Fleet Construction Equipment • San Angelo, TX Sat., March 11, 2017 For: Rental Fleet Construction Equipment & more • Parkersburg, WV Sat., March 18, 2017 For: Complete Liquidation, Fine Construction Equipment & more • Toronto, Canada Mon., March 27, 2017 For: Very Late Model Ag & Construction Equipment • Atlantic City, NJ March 30 – April 1, 2017 For: Annual 3-Day Contractors Auction • Clarksburg, WV Fri., April 21, 2017

For: Complete Liquidation. Late Model Vintage Equipment & more • Gray, ME Fri., April 28, 2017 For: Late Model Construction Equipment & more • Auburn, ME Fri., May 5, 2017 For: Late Model Construction Equipment & more • Syracuse, NY Sat., May 20, 2017 For: Complete Liquidation Construction Equipment • Canastota, NY Sun., May 21, 2017 For: Annual Landscape & Lawn & Garden Equipment RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • CIM Charity Auction, USA Wed., January 18, 2017 • North Franklin, CT Thurs., January 26, 2017 • Phoenix, AZ Thurs., February 9, 2017 • Houston, TX February 15 – 16, 2017 • Tipton, CA Fri., February 17, 2017 • Orlando, FL February 20 – 24, 2017 • Toronto, ON February 27 - 28, 2017 • Denver, CO March 2, 2017

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com • Las Vegas, NV March 9 - 10, 2017 • Chehalis, WA March 14, 2017 • Fort Worth, TX March 15 - 16, 2017 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY January 18, 2017 • ONLINE ONLY January 25, 2017 • ONLINE ONLY February 1, 2017 • ONLINE ONLY February 8, 2017 • ONLINE ONLY February 15, 2017 • ONLINE ONLY February 22, 2017 DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., April 22, 2017 For: Construction Equipment • Prospect, CT Sat., June 24, 2017 For: Construction Equipment EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Cisco, TX Tues., January 24, 2017 For: Heavy Equipment Auction • Sealy, TX Tues., February 14, 2017 For: Heavy Equipment Auction • Wills Point, TX Tues., March 21, 2017 For: Heavy Equipment Auction HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA January 26 - 28, 2017 For: 3 Day Winter Construction, Trucking & Farming Equipment Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., February 17, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., April 21, 2017 For: Truck, Trailer & Equipment • Marietta, PA Fri., June 16, 2017 For: Truck, Trailer & Equipment

HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY January 25, 2017 • ONLINE ONLY February 8, 2017 • ONLINE ONLY February 22, 2017 • ONLINE ONLY March 8, 2017 • ONLINE ONLY March 29, 2017 • ONLINE ONLY April 12, 2017 • ONLINE ONLY April 26, 2017 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Minersville, PA Wed., January 18, 2017 For: Absolute Auction Complete Liquidation J.B. Electric Corp. I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., March 3, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., June 9, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., September 8, 2017 For: Heavy Equipment, Truck & Trailer Auction • Foley, MN Fri., December 1, 2017 For: Heavy Equipment, Truck & Trailer Auction INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225 • Sebring, FL Sat., January 14, 2017 For: Construction & Agricultural Equipment • Sebring, FL Sat., March 11, 2017 For: Construction & Agricultural Equipment • Sebring, FL Sat., May 13, 2017 For: Construction & Agricultural Equipment IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Houston, TX Wed., February 1, 2017 For: Unreserved Public Auction • Kissimmee, FL February 13 – 17, 2017 For: Unreserved Public Auction – Biggest Auction of the Year!

• Las Vegas, NV Mon., March 13, 2017 For: Unreserved Public Auction J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • TIMED ONLINE January 3 - 20, 2017 For: Public Auction • Waxahachie, TX Thurs., January 26, 2017 For: Public Auction • Plymouth Meeting, PA Sat., January 28, 2017 For: Public Auction JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200 • Stanton, TX Wed., January 18, 2017 For: Winter Permian Basin Absolute Public Auction • Brooklyn, MS February 24 - 25, 2017 For: Early Spring Public Auction JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Carrollton, GA Wed., January 18, 2017 For: New Year Fleet Building Equipment Auction • Blairsville, GA Sat., March 18, 2017 For: Early Spring Fleet Auction • Savannah, GA Fri., March 24, 2017 For: New/Used Heavy Equipment Auction • Carrollton, GA Wed., April 26, 2017 For: Contractors Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Pelzer, SC Thurs., March 30, 2017 For: Annual Spring Construction Equipment/Truck Auction McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • Seven Valleys, PA Tues., February 14, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., March 14, 2017 For: Tractor, Farm & Construction Equipment • Great Mills, MD March 24 - 25, 2017 For: Tractor, Farm & Construction Equipment MOTLEYS ASSET DISPOSITION GROUP www.motleys.com 1-877-MOTLEYS • Richmond, VA Tues., January 24, 2017 For: Construction Equipment & Trucks

PETROWSKY AUCTIONEERS A Ritchie Bros. Company www.petrowskyauctioneers.com 860-642-4200 • North Franklin, CT Thurs., January 26, 2017 For: Heavy Equipment & Truck Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., January 19, 2017 For: Construction Equipment • ONLINE ONLY Thurs., January 26, 2017 For: Truck & Trailer Auction • ONLINE ONLY Thurs., February 2, 2017 For: Construction Equipment • ONLINE ONLY Thurs., February 16, 2017 For: Construction Equipment • ONLINE ONLY Thurs., February 23, 2017 For: Vontz Paving Inventory Reduction Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., March 11, 2017 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Cortland, NY Wed., January 25, 2017 For: Annual CNY Farm Supply Winter Auction • Warners, NY Tues., January 31, 2017 For: Complete Construction Company Liquidation Auction SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506 • Windsor Locks, CT Sat., May 6, 2017 For: 8th Annual Spring Auction WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., March 11, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., June 10, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., September 16, 2017 For: Construction Equipment, Truck & Trailers • Princeton, MN Sat., December 9, 2017 For: Construction Equipment, Truck & Trailers YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 6 – 11, 2017 For: 43rd Annual 6-Day Heavy Equipment, Trucks & Trailer Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 87

- DAY 1 -

- DAY 4 -

Monday, February 6, 2017

Thursday, February 9, 2017

Motor Graders, Asphalt Rollers, Asphalt Pavers, Asphalt Distributors, Compactors, Sweepers, Brooms, Vacuum Trucks, Soil Stabilizers, Roto Mills, Mixer Trucks, Concrete Equipment, Misc.

Hydraulic Excavators, Attachments, Parts, Off Highway End Dumps, Dumpers, Forklifts, Manlifts, Engines, Misc.

- DAY 5 Friday, February 10, 2017

- DAY 2 Tuesday, February 7, 2017 Rubber Tired Backhoes, Rubber Tired Loaders, Skid Steer Loaders, Attachments, Pumps, Trenchers, Forestry & Attachments, Boring Equipment, Misc.

Air Compressors, Welders, Light Plants, Engines, Track Drills, Crushing, Marine, Cranes & Attachments, Rough Terrain Cranes, Truck Cranes, Crawler Cranes, Pile Driving Equipment, Misc.

- DAY 6 -

- DAY 3 -

Saturday, February 11, 2017

Wednesday, February 8, 2017 Crawler Tractors, Crawler Loaders, Dirt Compactors, Motor Scrapers, Water Wagons, Off Highway Water Trucks, Attachments, Generators, Electric Motors, Power Units, Engines, Misc.

Farm Tractors & Implements, Mowers, Automobiles, Vans, Pickups, Specialty Items, Boom Trucks, Bucket Trucks, Fuel & Lube Trucks, Water Trucks, Mechanics Trucks, Digger Derricks, Flatbed Trucks, Rollbacks, Garbage Trucks, Cab & Chassis, Misc. Trucks, Buses, Box Trucks, Tri-Axle, Tandem & Single Axle Dump Trucks, Flatbed Dump Trucks, Truck Tractors, Truck Parts, Lowboy, Dropdeck, Dump & Flatbed Trailers, Misc. Trailers, Misc.

*Please Note Changes To Selling Schedule*

Page 88 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

$4.33 Billion⁄

Ritchie Bros. Auctioneers Completes Final Auctions of 2016 Ritchie Bros. Auctioneers Incorporated sold approximately $4.33 billion of equipment through 356 unreserved auctions and its online equipment marketplace during 2016. This is a new annual record for the company, and represents a 2 percent increase in gross auction proceeds (GAP) compared to 2015. “During 2016 we made strategic investments and acquisitions to better position our business for future growth, including the addition of an equipment sales listing offering, obtaining full ownership of Ritchie Bros. Financial Services, key bolt-on acquisitions to bolster our strength in certain regions and sectors, and the announcement of our impending acquisition of IronPlanet. All of these initiatives have built a stronger platform for our customers and shareholders as we expand our service offering and the solutions we provide equipment sellers. “The two percent GAP growth we recorded this year was negatively affected by lower equipment values relative to last year, though lot volume, buyers, consignors and registered bidders all grew substantially from 2015, indicating strong operational growth. Lot volumes grew nearly 13 perent, the number of buyers and consignors grew by 12 perent, and the number of registered bidders grew by 8 perent. Regionally, our Canadian business led growth, and achieved yet another record year.” During the fourth quarter of 2016, the company generated gross auction proceeds of $1.0 billion, a decrease of 9 perent compared to the fourth quarter GAP achieved last year. On a constant currency basis, GAP declined 8.5 perent during the fourth quarter of 2016 compared to the fourth quarter of 2015. As previously discussed on Ritchie Bros.’ Q3 2016 earnings call, auction timing differences did affect the quarter, with both the fall Montreal and Columbus auctions of 2016 occurring in the third quarter this year, rather than in the fourth quarter as they did in 2015. Ritchie Bros. conducted its final unreserved auction of 2016 on Dec. 21 in St. Louis, Mo. The company plans to release its full audited financial results for 2016 before market open on Feb. 20, 2017. U.S. Performance Ritchie Bros. sold approximately $2.1 billion of equipment and trucks in the United States during 2016 — unchanged from $2.1 billion in 2015. Certain regions of the US generated strong performance, including: • A 58 perent increase in GAP sold in Ohio • A 50 perent increase in GAP sold in Las Vegas • A 34 perent increase in GAP sold in Minnesota • A 23 perent increase in GAP sold in Arizona A number of company records were broken in the United States this year, including: • On March 17 to 18, 2016, Ritchie Bros. sold more than

$46 million of equipment and trucks at its largest-ever Denver, Colo., auction. The two-day auction also set new Denver site records for attendance (5,950+ bidders) and items sold (3,950+). • On Aug. 17, 2016, Ritchie Bros. sold $21 million of assets at its Tipton, Calif., auction. This was the largest-ever auction held at the Tipton auction site. • On Sept. 28 to 29, 2016, the company held its largest ever two-day auction in the United States, at its Columbus, Ohio auction site. More than $76 million of assets were sold at this auction, including $61 million on the auction’s first

day — the largest single day Ritchie Bros. has ever achieved at an auction in the United States. International Participation at Auctions International bidders are an important element of Ritchie Bros. auctions, as they generate global market pricing. During 2016, approximately 16 perent of GAP was generated by international buyers (successful bidders located outside the country of the sale), consistent with 16 perent in 2015. Approximately 9 perent of GAP generated in the United States was sold to international buyers, consistent again with 9 perent in 2015. Online Sales Ritchie Bros. attracted record online bidder registrations and sold approximately $2.1 billion of equipment, trucks and other assets to online buyers at Ritchie Bros. auctions and EquipmentOne customers in 2016, a 10 perent increase over 2015 and the highest amount ever sold online by the Company in one year. EquipmentOne Sells Approx. $137+ Million in Gross Transaction Value in 2016 EquipmentOne, the Company’s online equipment marketplace, has generated more than $137 million in Gross Transaction Value (GTV) so far this year, representing more than 17 perent growth over last year. Ritchie Bros. Financial Services Finances Over $285 Million in 2016 Ritchie Bros. Financial Services (RBFS) provided more than $285 million of financing to equipment buyers so far this year, a new record for this growing business and a 28.6

perent increase in financing activity compared to 2015. RBFS works with select lending partners to find financing solutions for customers purchasing equipment, including loans and lease-to-own programs. RBFS does not utilize company capital in its financing activities. During 2016, Ritchie Bros. purchased the minority interest of RBFS, and now owns 100 perent of the business. Executive and Board Changes During 2016 Several important executive and board changes were announced during the year, including the appointment of Marianne Marck as chief information officer, and Becky Alseth as chief marketing officer. The company also welcomed Sarah Raiss as a director on the board. $107.2 Million Return to Shareholders Ritchie Bros. increased its quarterly cash dividend by 6 perent in August 2016 to $0.17 per share, and paid shareholders $70.5 million in total dividends during 2016. During the year, Ritchie Bros. also repurchased and cancelled 1.46 million shares, for a total cost of $36.7 million. Corporate Development Activities During 2016, Ritchie Bros. completed and announced several important acquisitions, to reach new customer segments and cater to a broader set of customer needs. • On Feb. 19, 2016, the company announced its acquisition of Mascus — one of the world’s leading online equipment listing services, adding to Ritchie Bros. menu of sales solutions for equipment sellers. • On July 12, 2016, Ritchie Bros. acquired the minority interest of Ritchie Bros. Financial Services, providing the company with 100 perent ownership of its equipment finance brokerage business. • Also on July 12, 2016, Ritchie Bros. announced that it has made a strategic minority investment in Machinio — a global search engine for finding, buying and selling equipment. • On Aug. 2, 2016, the company acquired Petrowsky Auctioneers, an industrial auctioneer with a strong presence in the New England region of the United States. • On Aug. 29, 2016, Ritchie Bros. announced its impending acquisition of IronPlanet — a leading online marketplace for used heavy equipment, for $758.5 million. • On Nov. 15, 2016, the company acquired Kramer Auctions, a boutique agricultural auctioneer that caters to the needs of farming communities in Canada’s prairie provinces. For more information, visit rbauction.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 89

DON’T MISS S IT! THE BEST T SELECTION OF EQUIPMEN NT IN FLORIDA A. PERIOD.

FLOR RIDA 2017 2

FEBRUARY 13 3-17

www w.IronPlaneet.com/Florrida e

Page 90 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX PARIS CONTRACTING CO INC.................................................................. 9

JOHN DEERE........................................................................................................ 40

ALLIED CONSTRUCTION PRODUCTS................................................................53

KAWASAKI - KCM..................................................................................................69

ALLU GROUP........................................................................................................ 38

KLEEMAN.............................................................................................................. 59

AMERICAN STATE EQUIPMENT............................................................................ 7

KOBELCO.............................................................................................................. 64

ARING EQUIPMENT CO INC................................................................................ 19

KOMATSU AMERICA CORP............................................................................ 44,70

ARTIC SNOW & ICE CONTROL.......................................................................... 26

KPI-JCI.................................................................................................................. 54

ASCENDUM.......................................................................................................... 11

KUBOTA................................................................................................................ 91

ATI CORPORATION/LEVEL BEST........................................................................ 38

M ADAMS EQUIPMENT CO.................................................................................. 25

BANDIT INDUSTRIES INC.................................................................................... 57

MCCANN INDUSTRIES INC....................................................................................6

BARGAINS........................................................................................................ 83,84

METSO MINERAL CRUSHING..............................................................................51

BOBCAT CO.......................................................................................................... 46

METSO MINERAL SCREENING.......................................................................... 63

BREAKER TECHNOLOGIES INC........................................................................ 18

MID COUNTRY MACHINERY................................................................................22

BROOKS TRACTOR..............................................................................................31

MUSTANG MFG.................................................................................................... 48

CEG SCALE MODELS.......................................................................................... 32

NORAM.................................................................................................................. 42

CLASSIFIEDS........................................................................................................ 82

PATTEN TRACTOR & EQUIPMENT CO.............................................................. 21

CLEARSPAN FABRIC STRUCTURES.................................................................. 33

POWERSCREEN MW DEALER............................................................................ 61

CONEXPO..............................................................................................................23 CONSTRUCTION EQUIPMENT GUIDE GENERATOR.............................................................................................. 72 WANTED......................................................................................................85 CUSTOM MADE PRODUCTS................................................................................ 6 DEUTZ CORPORATION.................................................................................. 33,72 DOOSAN PORTABLE POWER............................................................................ 39 DOPPSTADT..........................................................................................................58 DYNAPAC.............................................................................................................. 73 E TIP INC.............................................................................................................. 72 ERB EQUIPMENT..................................................................................................15 FABICK CAT............................................................................................................ 2 FARM-RITE EQUIPMENT INC.............................................................................. 10 FELLING TRAILERS.............................................................................................. 80 FINKBINER EQUIPMENT CO................................................................................ 7 FLANGE LOCK...................................................................................................... 31 FOLEY EQUIPMENT CO...................................................................................... 17 FURY MOTORS.................................................................................................... 78 FURY PARTS & SERVICE.................................................................................... 76

RANSOME EQUIPMENT SALES LLC/LRH.......................................................... 85 RDO EQUIPMENT................................................................................................ 29 RDO EQUIPMENT/MINNESOTA EQUIPMENT.................................................... 16 ROAD BUILDERS MACHINERY...................................................................... 13,38 ROLAND MACHINERY INC.................................................................................... 5 SANY AMERICA INC............................................................................................ 33 SCHAEFER ENTERPRISES..................................................................................36 SCREEN MACHINE INDUSTRIES........................................................................ 56 SENNEBOGEN...................................................................................................... 55 SMITHCO.............................................................................................................. 76 STAR EQUIPMENT LTD.......................................................................................... 6 TEREX CRANES.................................................................................................. 68 TEREX FUCHS...................................................................................................... 60 THE VICTOR L PHILLIPS CO.............................................................................. 26 TOWMASTER INC................................................................................................ 77 VIRNIG ATTACHMENTS........................................................................................37 YODER & FREY AUCTIONEERS KISSIMMEE FL............................................................................................ 87

GARY CARLSON EQUIPMENT.............................................................................. 8 GROVE WORLDWIDE.......................................................................................... 66

OHIO STATE SUPPLEMENT

HOWELL TRACTOR & EQUIPMENT CO..............................................................92

BOBCAT ENTERPRISES........................................................................................ 4

ILLINOIS TRUCK & EQUIPMENT.......................................................................... 3

COLUMBUS EQUIPMENT CO................................................................................ 8

IRAY AUCTION...................................................................................................... 86

COMPANY WRENCH.............................................................................................. 5

IRONPLANET

EQUIPMENT CORP OF AMERICA........................................................................ 7

KISSIMMEE FL............................................................................................ 89

HIGHWAY EQUIPMENT COMPANY...................................................................... 3

JEFF BELZER........................................................................................................ 79

OHIO-MICHIGAN EQPT DEALERS........................................................................ 7

JJ SCHECKEL CORP............................................................................................ 27

THE MCLEAN CO....................................................................................................6

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • January 14, 2017 • Page 91

Opportunity is knocking—sa —save on Kubota’s versatile U Series compact excavators today!

0 Down, 0% Financing for 48 Months

A.P.R.

Offfer ends 3/31/17..

Martin Implement Sales, Inc. www.martinimplement.com 18405 115th Avenue Orland Park, IL 60467 708/349-8430 Fax 708/349-4230

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. 2001 Cherry Hill Rd. Waukegan, IL 60087 Joliet, IL 60433 847/336-1205 815/464-6650 Fax 847/336-2697 Fax 815/464-6951 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

1st Choice Equipment LLC www.1stchoiceequipment.com 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Lano Equipment, Inc.

ABC Equipment

www.lanoequip.com

www.abcequipment.com

Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

Corcoran, MN 888/479-4342 763/479-8200

29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949

Southeastern Equipment Co., Inc.

Niebur Tractor & Equipment, Inc.

www.southeasternequip.com

www.nieburtractor.com

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868

14380 240th Street E. Hastings, MN 55033 651/437-3531

38525 Chester Rd. Avon, OH 44011 440/934-7368

*$0 down, 0% A.P A P.R. financing for up to 48 months on purchases chases of new Kubota U Series equipment is available a to qualified purchasers from m participating dealers’ in-stock inventory thrrough 3/31/2017. Example: A 48-month monthly installment repayment term at 0% A.P.R. requires 48 payments of $20.83 per $1,000 000 financed. 0% A.PP.R. .R. interest is available to customers if no dealer documentation preparation fee is charged. Dealer charge foor document preparation fee shall be in accordance rdance with state sta laws. Inclusion of inelligible equipment may result in a higher blended ded A.P.R. 0% A.P.R. and low-rate financing may not be available with customer instannt rebate offers. Financing is available througgh Kubota Credit Corporation, U.S.A., 3401 Del Amo Blvd., Torrance, Torrance, CA 90503; subjectt to credit approval. Some exceptions apply. Offer O expires 3/31/2017. See us for details on these and other low-rate low-ra options or go too www.kubota.com for more information. Opttional equipment may be shown.

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

kubota.com k

Page 92 • January 14, 2017 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE