Midwest 9 April 25, 2026

MoDOT Adds Lanes With $426M Improve I-70

The $426 million Improve I-70 from Columbia to Kingdom City project will update the

tions from U.S. Route 63 in Columbia and Route 54 in Kingdom City.

Riley

When construction of I-70 began in St. Charles County in 1956, Missouri was deemed the birthplace of the interstate. With time, however, many portions of the thoroughfare have become strained beyond capacity and feature outdated interchange designs. The $426 million Improve I-70 from Columbia to Kingdom City project will update the corridor by adding a third lane to I-70 in both directions from U.S. Route

63 in Columbia and Route 54 in Kingdom City.

“Missouri’s FY2024 budget provides $2.8 billion in general revenue for the costs to plan, design, construct, reconstruct, rehabilitate and repair three lanes in each direction on nearly 200

see MODOT page 54

The Hidden Costs of Poor Safety Training

Fewer Incidents, Lower Operating Costs, Happier Crew Improve Bottom Line

By Lucy Perry CEG CORRESPONDENT

Safety both on the job site and in the equipment yard makes financial sense. It’s both socially responsible and good business. Contractors who invest in sound safety training see a noticeable return on investment. Their business image in the community and the industry improves as they comply with standards and regulations. The bonuses, though, are cost savings, efficient operations see SAFETY page 26

8 BRANDEIS HOSTS SKILLSUSA KENTUCKY DIESEL COMPETITION

The 2026 SkillsUSA Kentucky State Competition for Diesel Equipment Technology brought together top student technicians from across the state for a hands-on evaluation of their skills at the Brandeis Machinery and Supply facility.

12 HAYDEN-MURPHY HOSTS PREMIER EXECUTIVE LEADERSHIP FORUM

Hayden-Murphy played host to its first exclusive Executive Leadership Forum, bringing together top decision-makers for a day of high-level strategy, insight and professional development.

14 FOLEY ADDING NEW FACILITY IN MISSOURI AT LAKE OF THE OZARKS

Foley Equipment, the Caterpillar dealer for Kansas and 40 counties in Missouri for more than 85 years, announced April 8, 2026, that it is expanding with a new facility in Missouri at Lake of the Ozarks.

16

FARM-RITE WILLMAR HOSTS ANNUAL OPEN HOUSE

Farm-Rite Equipment welcomed more than 400 guests to its annual open house at its facility in Willmar, Minn. Manufacturer representatives were on hand to introduce everyone to the newest equipment and latest technology.

22 ROLAND, LOCAL 139 HOST PAVING TRAINING CLASS IN WIS.

Roland Machinery Co. hosted a paving and compaction training class on April 7, 2026, at the International Union of Operating Engineers Local 139’s training facility in Coloma, Wis., drawing more than 180 registered attendees.

28 TRI-STATE BOBCAT HOSTS SUCCESSFUL 2026 OPEN HOUSES

Tri-State Bobcat recently hosted two open house events at its Burnsville, Minn., and Little Canada, Minn., locations, drawing a strong turnout of customers, vendors and community members across both days.

32 MCCOY HOSTS OPEN HOUSE IN CHIPPEWA FALLS, WIS.

Customers and guests of McCoy Construction & Forestry gathered at the company’s facility at 4341 S. Prairie View Rd., Chippewa Falls, Wis., for the annual open house event on April 10, 2026.

IN THIS ISSUE

MIDWEST EDITION

56 EAST TRAILERS GROWS WITH MANUFACTURING LINE EXPANSION

East Trailers LLC is fueling its next phase of growth with a major expansion that will increase production capacity, create 175 new jobs, retain 435 existing positions and include a $3 million capital investment in its operations.

58

LEER STRENGTHENS TEAM WITH INDUSTRY VETERAN RANDI CARR

Leer Group is expanding and strengthening its fleet sales team with the recent appointment of Randi Carr as its new fleet sales manager. Carr brings more than 20 years of sales leadership experience.

60

ASE RECEIVES LIEBHERR LRB 19 PILING, DRILLING RIGS

With a partnership spanning more than 50 years, American State Equipment is Liebherr USA Co.’s oldest and largest dealer providing sales and rentals across the country with a focus in the Midwest.

64 KUBOTA BREAKS GROUND ON KANSAS EQUIPMENT TEST CENTER

Kubota North America marked a significant expansion of its compact construction business with the groundbreaking of a new construction equipment test center in Salina, Kan.

64 JOHN DEERE BRINGS EMPLOYEES BACK TO WORK IN IOWA, KANSAS

John Deere announced that nearly 50 additional employees will return to work in April 2026 across its Dubuque Works and Davenport Works facilities in Iowa and Coffeyville Works in Kansas.

WAUSAU WELCOMES ALL TO ANNUAL SPRING SALE IN MERRILL, WIS.

On April 10, Wausau Auctioneers hosted its annual Spring Equipment Auction at its facility — 4510 County Road L — in Merrill, Wis. The sale was conducted onsite and online.

GOMACO DEBUTS GP348 CONCRETE SLIPFORM PAVER,

CURB ROLLER’S BATT SCREED II: ONE SCREED FROM FLATWORK TO CURB

Kraft Auction Service hosted the Walkerton Farm and Equipment consignment auction April 6–9, 2026, at 9224 S. 875 E. in Walkerton, Ind., offering live onsite bidding with online bidding available throughout the four-day event.

2017 HAMM HD+110IVT $103,000 STK# HM17056, 703 HRS, Cape Girardeau, MO

2022 KOMATSU WA320-8 $205,000 STK# KM2022647, 533 HRS, Springfield, IL

2008 GRADALL XL4100 II $58,000 STK# ZZ2022589 7,845 HRS, Bolingbrook, IL

2008 VALMET 840.3 $95,000 STK# VT2022063, 25,466 HRS, Escanaba, MI

2019 WIRTGEN W120CFI $435,000 STK# WG2021088, 1148 HRS, Springfield, IL

2018 KOMATSU PC88MR-10 $64,500 STK# KM2023642, 3874 HRS, Carterville, IL 2018 KOMATSU HM400-5 $479,500 STK# KM2024111, 6280 HRS, Cape Girardeau, MO

2013 HAMM HD12VV $19,500 STK# HM2023091 3238 HRS, DePere, WI

2016 KOMATSU 931.2 $315,000 STK# VT2022024, 9946 HRS, Escanaba, MI

2017 KOMATSU PC88MR-10 $55,000 STK# KM2022612, 5196 HRS, Bolingbrook, IL

2020 KOMATSU WA270-8 $175,000 STK# KM2022362, 649 HRS, DeForest, WI

2018 KOMATSU PC490LC-11 $159,500 STK# KM2024254, 9121 HRS, Columbia, MO

2014 KOMATSU D37PX-23 $99,500 STK# KM2023250 2204 HRS, Palmyra, MO

2020 KOMATSU PC210LC-11 $239,500 STK# KM2022040, 682 HRS, Bolingbrook, IL

2015 KOMATSU PC228USLC-10 $149,500 STK# KM2021516, 4061 HRS, Escanaba, MI

2019 KOMATSU PC170LC-11 $155,000 STK# KM2022354, 2310 HRS, Bolingbrook, IL

CAT 349FL $89,500 STK# CT2024019, 10,285 HRS,

2017 KOMATSU 931.2 $305,000 STK#VT2023001, 10,292 HRS, Escanaba, MI

2018 HAMM HD+110IVO $104,560 STK# HM18066 773 HRS, Carterville, IL

2020 KOMATSU PC240LC-11 $220,000 STK# KM2022017, 2323 HRS, Springfield, IL

2023 Kobelco ED160-7, S/N LH04006200, 1110 Hours, CAB/AIR/HEAT, HYDRAULIC COUPLER, 1 BUCKET, BACKFILL BLADE WITH EXTENSIONS $199,900

2022 Case 521G, S/N 253822, 266 Hours, CAB/AIR/HEAT, RIDE CONTROL, THIRD VALVE, LIMITED SLIP DIFF, JRB COUPLER2.5 YARD GP BUCKET, DELUXE CAB .. $129,900

2024 New Holland C332, S/N JAF0C332CPM450628, 622 Hours, CAB/AIR/HEAT, HIGH FLOW HYDRAULICS, HYDRAULIC COUPLER, GP BUCKET

$109,900

2022 Case 850M WT Dozer, S/N JJGN850MPMC104001, 623 Hours, CAB/AIR/HEAT, PAT BLADE, SWEEPS $177,000

2019 Case CX210D, S/N DAC210K7NKS7H1988, 2948 Hours, CAB/AIR/HEAT, HYDRAULIC COUPLER, 36" BUCKET, AUX HYDRAULICS ............$99,900

Brandeis Hosts SkillsUSA Kentucky Diesel Competition

Rupe (L) and Josh Gardner of Penske Truck Rental hosted the preventative maintenance station, where competitors demonstrated essential inspection and service skills, reinforcing the importance of routine upkeep in keeping equipment running safely and efficiently.

The 2026 SkillsUSA Kentucky State Competition for Diesel Equipment Technology brought together top student technicians from across the state for a hands-on evaluation of their skills at the Brandeis Machinery and Supply facility.

Designed to reflect real-world shop conditions, the competition challenged students through a series of stations focused on diagnostics, preventative maintenance and core mechanical knowledge. Each station tested not only technical ability, but also problem-solving, accuracy and attention to detail — all critical skills for success in today’s diesel industry.

Throughout the event, students worked through practical scenarios that mirrored the types of challenges they will face in the field. From identifying faults to completing detailed inspections, the competition emphasized real-world application at every step.

The event also highlighted the importance of efficiency and precision. With limited time at each station, students were required to think quickly, follow proper procedures and demonstrate confidence in their work.

Events like the SkillsUSA competition play a key role in preparing students for careers in the industry. By combining classroom learning with hands-on application, participants gain valuable experience that helps bridge the gap between education and the workforce.

see SKILLS page 77

Luke Patton of Boone County Area Technology Center, Hebron, Ky., completed a preventative maintenance station that focused on inspection and proper service procedures.

Wes Heim (L) and Travis Cox of United Rentals hosted the engine diagnostics test station, where competitors worked through hands-on troubleshooting and evaluation as part of the Diesel Equipment Technology competition.

Barnett of Brandeis Machinery and Supply Company supports workforce development at the 2026 SkillsUSA Kentucky State Competition for Diesel Equipment Technology, where Brandeis provided equipment and hands-on learning opportunities for student competitors.

Jackson Buckles (L) and Ty Tucker of Green River College and Career Academy in Hart County, Ky., worked together at the United Rentals engine diagnostics test station where they performed hands-on troubleshooting and evaluation on a compact excavator.

Republic Services team members hosted a hands-on transmission and drivetrain parts identification station, giving competitors an ASE-style written test as part of the competition.

Ryan England, representing Barren County Area Technology Center in Glasgow, Ky., demonstrates his technical knowledge during a Republic Services–hosted parts identification ASEstyle written test.

Roadtec RX100e - ‘18, approx. 500 hrs. Includes grade controls

$165,800 Sandvik CJ412 - ‘14, approx. 1400 hrs. Mobile jaw plant $540,800

Sakai R2H-4 - ’19, approx. 900 hrs. 83” triple drum static $85,500

ROLLERS

Sakai R2H-4 static roller - ‘23, approx. 120 hrs., #C002897

$108,800

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls ....................................$35,200

EXCAVATORS

Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd

$P.O.R.

Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ..............$P.O.R.

$26,850.

Sakai SW884ND - ‘19, approx. 2900 hrs., #C002777, Double drum Oscillatory $148,400 Sakai SW300 - approx. 450 hrs, 39” drum, #C000211

CRUSHING AND SCREENING

ASTEC GT104 - ‘17, 325 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154

$148,900

Superior DT74J - ’19, approx. 1300 hrs. AC, Side shift, gutter brush, #C001774 $35,400

BROOMS MILLING MACHINES

BOMAG BM600 - ‘16, 565 Hrs, 24” Drum, Load Out Conveyor

$152,800

Roadtec RX-300 - ’18, approx. 600 hrs. 4’ drum

$311,400

KPI FT2650 – ’19, approx. 1800 hrs. Tracked jaw crusher

$546,950

PAVERS / ROAD WIDENERS

Mauldin 1560 paver – ’22, approx. 600hrs. 8-14’, electric screed heat $99,600

P.O.R. items may be on rent causing pricing and hours to vary.

715-752-8112

JD 50G, A/C, Hyd Thumb, 5’7” Long Arm, Blade, Aux, #292872 ......................................$45,000

Kubota KX057-5, A/C, Hyd Thumb, Angle Blade, Aux Hyd, #296470 ........................$76,000

JD 331G, A/C, Hi Flow Aux, 2 Speed, Ride Control, #262952 .. $65,000

JD 310SL, A/C, 4X4, Ext Dipper, Ride Control, #262892 .... $99,000

JD 85G, A/C, Rubber Pads, Blade, Aux Hyd, 6’11” Arm, #291320 ........................$99,000

Komatsu PC138LC-11, A/C, Long Arm, CPLR, Rubber Pads, #298908 ......................$160,000

Deere 650K, A/C, LGP, 28” Pads, PAT 128” Blade, Rev Fan, #262371 $110,000

JD 320P, A/C, 4X4, Ext Dipper, Aux, 19.5 Tires, Coupler, #302479 $115,000

JD 135G, A/C, 9’11” Arm, 24” Shoes, Reduced Tail Swing, #249203 ........................$87,000

JD 350G, A/C, Aux Hyd, Coupler, 13’1” Arm, #304349 ....................................$130,000

CAT D6K2, A/C, Trimble, LGP, 34” Pads, 6 Way Blade, #305875 $125,000

CAT 430F2, A/C, Pilots, Ext Dipper, 4X4, Aux, 19.5 Tires, #299832 $95,000

JD 210G, A/C, Hyd Thumb, Coupler, 9’7” Arm, Rev Fan, #261276 ......................$130,000

Volvo EC750EL, A/C, CWRT, 36” Pads, 9’6” Arm, 96” BKT, #305074 ......................$285,000

JD 700K, A/C, LGP, 30” Pads, 6 Way 132” Blade, Sweeps, #296466 $140,000

Deere 524K, A/C, Rev Fan, 20.5 Tires, Front Diff Lock, #300486 .. $88,000

JD 245G, A/C, Aux Hydraulics, 9’7” Arm, 32” Shoes, Air Seat, #262242 ......................$195,000

JCB 100C-2, A/C, Hyd Thumb, Coupler, Blade, Rubber Pads, #307577 ........................$84,000

CAT D8T, A/C, 152” Semi U Blade, Ripper, Trimble Ready, #305941 $350,000

JD 844K-III, A/C, Scale, Radio, 8 YD GP Bucket, #261515 .......... $210,000

Hayden-Murphy Hosts Premier Executive Leadership Forum

Mekenna Inbody SPECIAL TO CEG

While Hayden-Murphy Equipment Company is a name synonymous with heavy iron and powerhouse brands like Manitowoc and Grove, its recent initiative proves the company is equally invested in the networking connections and relationships that drive the construction industry.

On Feb. 20, 2026, in backdrop of The Club at Golden Valley in Golden Valley, Minn., Hayden-Murphy played host to its first exclusive Executive Leadership Forum, bringing together top decision-makers for a day of high-level strategy, insight and professional development.

This event marked a significant pivot from traditional equipment showcases or open houses, instead focusing on economic outlook and managerial leadership challenges. As the industry grapples with shifting fiscal policies, evolving work culture and a tightening labor market, Hayden-Murphy stepped up to facilitate a much-needed dialogue.

Trifecta of Industry Insights

and financial foresight, the company has cemented its role as a consultant and advocate for its customers, rather than just a machinery provider.

Looking Ahead

The forum featured a diverse lineup of speakers, each tackling a critical pillar of modern business management and industry application.

Darrel Mullenbach and David Olson of CLA (CliftonLarsonAllen): To kick start the event, partners of CLA opened the floor with a deep dive into tax management best practices. In an era of evolving tax codes, their insights provided attendees with actionable

strategies to protect their bottom lines and optimize capital expenditures.

Chief U.S. Economist Scott Anderson of BMO: Providing the “big picture” view, Anderson tackled current economic outlook and market predictions. His session offered a nuanced breakdown of interest rate trajectories, economic trends and the persistent challenges of the modern workforce environment — two factors that remain top-of-mind for any fleet owner or project manager.

Steve Keating of Lead Today: Shifting the focus to internal dynamics, Keating explored the various levels of leadership. His presentation went beyond mere theory, providing

real-life examples for navigating professional conflict and building personal resilience to extend team capabilities, collaboration and communication.

Total Site Solutions

After a delicious full-spread complimentary breakfast buffet, the atmosphere in Golden Valley was one of collaboration and productive networking. Partners and attendees were able to share personal perspectives and insights during scheduled breaks for ultimate collaboration over the course of the morning and into the early afternoon. The success of the forum underscored a fundamental pillar about the host’s philosophy and almost 70-year legacy: HaydenMurphy is your complete partner that goes beyond equipment for total site solutions. By providing a platform for intellectual growth

The feedback from attendees was warm and positive — the forum provided well-received industry applications and insight that will resonate long after dismissal. But for HaydenMurphy, this was only the beginning. Plans are already in motion for next year’s event, with a promise to go even bigger and better.

Expect an expanded roster of experts and familiar favorites with even more opportunities to connect with the leaders shaping our future of the construction and heavy equipment sectors. The Hayden-Murphy Executive Leadership Forum has all the potential to become an essential fixture on the industry calendar.

“Our goal is to provide additional value and support through a mutually-beneficial collaborative forum where industry leaders can explore honest discussions and conversation,” said Jeff Clarke, CEO of HaydenMurphy.

Details for the 2027 forum will be provided in the coming months for registration and event opportunities.

For more information, visit hayden-murphy.com.  CEG

Foley Adding New Facility in Missouri at Lake of the Ozarks

Foley Equipment, the Caterpillar dealer for Kansas and 40 counties in Missouri for more than 85 years, announced April 8, 2026, that it is expanding with a new facility in Missouri at Lake of the Ozarks. The new Foley facility includes rental and sales for the construction business.

“Lake of the Ozarks continues to grow, and we saw a wonderful opportunity to join with LOZ Rentals, a rental business in this area,” said Darrick Prock, vice president of rentals of Foley. “This addition will further enhance our ability to serve customers around the lake and in central Missouri.”

About Foley Equipment

Foley Industries — Foley Equipment, Foley Power Solutions, Foley Rental and SITECH Central — is in its ninth decade of empowering progress for Kansas and Missouri customers.

The new facility is located on Highway 54 between Osage Beach and Camdenton.

“We are delighted to have found a great business serving the lake region and are excited to collaborate and expand our footprint,” said Ann Konecny, Foley’s CEO. “Our customers perform very important work. We are excited to grow with those customers and better enable them to empower progress across Lake of the Ozarks.”

The new store is open to customers.

Foley’s more than 1,300 employees strive every day to safely deliver excellence in service, parts, rental and sales across a broad line of Caterpillar construction and power generation products, multiple brands of construction and power rental equipment, overthe-road truck services, SITECH construction technology solutions and Shuttlewagon rail car movers.

For more information, please visit FoleyEq.com. 

Farm-Rite Willmar Hosts Annual Open House

The big shop is the perfect area to serve lunch and host the prize table.

Justin Williamson, inside sales consultant of Felling Trailers, Sauk Centre, Minn., with a FT-16 DT HD dump trailer. The DT HD heavy-duty, takes the roughest jobs in stride, from hauling dirt and rock to transporting your skid steer.

Josh Koglin, Farm-Rite of Willmar service department, works the phones even during an open house. Commitment to service at its best.

A huge turnout for good food and to catch up with Farm-Rite staff and product representatives for the great lineup Farm-Rite has available.

Farm-Rite Equipment welcomed more than 400 guests to its annual open house at its facility at 1515 U.S. Highway 12 W in Willmar, Minn.

Manufacturer representatives were on hand to introduce everyone to the newest equipment and latest technology. Farm-Rite staff were available to answer questions as well. In addition to its annual huge parts sale and other special offers, guests were treated to a buffet lunch and the chance to win a variety of prizes.

(L-R): Mike Fitzgerald, marketing director of Bobcat; Joe Meide, Bobcat district parts and service manager; and Tim Krahn, district sales manager of Bobcat, West Fargo, N.D., with one of Bobcat’s most popular models — the T770 compact track loader.

Paul Schreurs, regional sales manager of Diamond Mowers, Sioux Falls, S.D., shows a 50-in. 75 hp mulcher head SK Drum DC Pro. “It’s getting to be land clearing time of year,” said Schreurs. “This unit will get the job done.”

Chris Guggemos (L), outside sales manager, and Ryan Kral, parts manager of Towmaster Trailers, Litchfield, Minn., with a T-14DT with a 14,000-lb. capacity, drop-deck tilt trailer designed for hauling mid-sized construction equipment, such as skid steers or mini-excavators.

The Farm-Rite showroom lineup for the day takes advantage of the massive service bays on site.

Farm-Rite is a full-service Bobcat dealer, providing sales, service, parts and rentals. The company was established in Dassel, Minn., in the mid-1970s and has since expanded to locations in Willmar, St. Cloud and Long Prairie.

In addition to Bobcat, Farm-Rite offers Felling Trailers, KAGE attachments, Diamond Mowers, Virnig attachments, MuskOx snow blowers, Beekman Vac and Towmaster Trailers.

For more information, visit farmriteequip.com.  CEG

(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)

Hamm 3412P, 2012, 84” vibratory padfoot compactor, EROPS w/ heat & A/C, 1,200HMR .

$82,500

Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new paint job, very good condition, 9,400 HMR $195,000

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires $15,500 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready

From $79,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote $4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type

$4,000 - $6,500

Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready

$127,500

Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday

$145,000

Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000

Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready

$115,000

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition

$147,500

Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites

$87,500

Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, 10.00R15 tires, 3,400 hrs

$21,500

Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean

IR 185’s, JD diesels

$49,500

CALL

Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 HMR, work ready

$162,500

Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 HMR, work ready $224,500

Komatsu PC220LC-8 Longreach, 2011, Young Boom/Stick 60’ reach, 3,500 HMR $179,000

Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites

$89,000

Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday

.$122,500

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent From $5,200 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt

$24,500

(2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition $4,000 Ea. NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Dozer Blade

Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR .

$72,500

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch, 22” Pads, 4,100 HMR

$82,000

$49,500

Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads

Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition CALL

Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice CALL

Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, 9,900 HMR

$87,500

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55 winch, 7,200 HMR

.$142,500

Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl

Single Shank Ripper, 8,400 HMR

$229,500

$25,500 BUCKETS Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent $4,000 Others Available Call Prices Are Negotiable - At Your Inspection

$152,500

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS winch, 28” pads, 7,300 HMR

Roland, Local 139 Host Paving Training Class in Wis.

Roland Machinery Co. hosted a paving and compaction training class on April 7, 2026, at the International Union of Operating Engineers Local 139’s training facility in Coloma, Wis., drawing more than 180 registered attendees for a full day of classroom instruc-

tion and hands-on equipment demonstrations.

The event focused on best practices and fundamentals of asphalt paving and compaction, giving contractors, operators and industry professionals the opportunity to learn directly from manufacturer and application specialists while operat-

ing equipment in a real-world training environment. The program combined indoor classroom sessions with outdoor, hands-on training featuring a selection of Wirtgen Group equipment supplied by Roland Machinery Co.

Attendees had the opportunity to operate two Vögele asphalt pavers — the SUPER 2000 3i tracked paver and the SUPER 1700 3i tracked paver — as well as two Hamm compaction machines, including the HD+ 120i VIO 2 high-frequency double-drum roller and the Hamm HP 280i pneumatic rubber-tired roller.

Training on best practices in compaction was led by Tim Kowalski of the Wirtgen Group, while Laikram Narsingh (Nars), application and technology specialist of Wirtgen America, conducted the paving-focused instruction. Both sessions emphasized proper machine setup, operating techniques and real-world

jobsite considerations designed to improve paving quality, consistency and efficiency.

The day began with opening remarks from Chris Ingram, vice president and general manager of the Material Solutions Group of Roland Machinery. Ingram thanked Local 139 for hosting the event and expressed appreciation to attendees for their continued commitment to education, training and workforce development within the industry.

Throughout the day, participants rotated between classroom instruction and hands-on machine operation, reinforcing key concepts and allowing operators to immediately apply best practices in the field. A catered lunch also provided time for networking and discussion among contractors, instructors and equipment specialists.

Roland Machinery Co. has been serving the Midwest for 68 years, with 17 locations throughout Illinois, Missouri, northwest Indiana, Wisconsin and the Upper Peninsula of Michigan. The company offers customers a wide range of products, support and service solutions, equipment sales, parts, service and training.

Roland Machinery’s equipment lines include Komatsu, Komatsu Forestry, Wirtgen, Vögele, Kleemann, Hamm, SENNEBOGEN, Fuchs, Gradall, LeeBoy, Tana, TimberPro, Bobcat Portable Power, TerraMac and more.

For more information, visit rolandmachinery.com.  CEG

(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)

More than 180 registered attendees were present for a full day of classroom instruction and hands-on equipment demonstrations at Roland Machinery’s paving and compaction training seminar.

NEW! Next Gen Crawler Excavators

Get Bigger Payoffs with Hyundai Next Generation HX Excavators

Powered by Hyundai engines, these new Next Generation HX excavators deliver 22% higher power output than previous versions. This performance is matched by a significant reduction in operating costs, offering up to 9% improved fuel efficiency. Let’s put smarter productivity to work. Talk with a Hyundai dealer near you about performance gains and fuel savings.

Implementing Safety Protocols Increases Quality, Loyalty

and employee satisfaction.

“Employers want their employees, customers and the public to view them as safety minded, health conscious and sustainable,” said the American Society of Safety Professionals (ASSP).

In a blog post on safety ROI, the association said that non-compliance can be disastrous and cost an organization financially and in public perception.

In fact, a proven record in workplace safety and construction safety elevates your standing with clients, partners and investors, believes YellowBird Training.

“In the age of environmental, social, governance metrics, strong safety performance is a key evaluation criterion,” said the firm in a blog post.

Investors are increasingly scrutinizing safety data as part of their risk assessments, it noted.

“Clients, especially in government and enterprise contracts, prefer vendors with demonstrated safety excellence.”

Occupational safety and health (OSH) programs can reduce costly worker injuries and incidents, the group said. These cost reductions allow companies to reduce expenses related to medical care, paid time off, litigation and disaster mitigation.

Beyond the human cost, there's a compelling financial incentive, stressed YellowBird.

One of the most overlooked benefits is the cost savings from subcontractor safety training, said the organization in a blog post.

“Insurance premiums, legal settlements and project downtime all add up when safety is neglected,” it noted.

Companies that implement safety protocols effectively report a return of $4 to $6 for every $1 spent on safety programs, said YellowBird.

Lower incident rates also reduce your Experience

Modification Rate (EMR), directly influencing workers’ compensation insurance premiums.

“An organization-wide focus on safety leads to higher worker productivity,” said the ASSP article. This productivity, in turn, “drives short-term revenue growth and supports long-term sustainability.”

YellowBird sees this trend, as

well. The training firm believes safer environments boost morale, retention and overall productivity.

Recruiting and retaining top talent is easier for safety-conscious organizations, said ASSP. This is especially true for contractors that provide safe and comfortable workplaces, care for employee well-being and protect the environment.

Further, YellowBird points out, toptier subcontractors want to work for contractors that take their well-being seriously.

“Offering contractor safety training demonstrates professionalism and care, increasing contractor loyalty and the quality of their work,” the firm said. “In markets with skilled labor shortages, a reputation for safety can be a critical differentiator.”

In fact, reduced turnover and higher subcontractor engagement mean better project outcomes, said YellowBird.

“Some business leaders perceive workplace safety as a compliance-driven or feel-good initiative that costs their organizations money,” said ASSP.

High-performing organizations, however, see real returns when they continually identify, analyze and evaluate risks, and evaluate existing controls. Add to that list executing needed improvements — “a formal process known as risk assessment,” according to the ASSP post.

Safety training plays a key role in safety policy and the ROI on that training is measurable, say organizations that focus on training and certification.

CraneTech believes that some con-

tractors often see workplace safety training like a trimmable line item. This philosophy can actually drive up insurance costs or even send a good worker home with an on-the-job injury.

“The truth is simple,” said the crane training and certification company: “Safety protects both profit and people.”

CraneTech trainers believe the ROI of safety training can be measured through fewer injuries and lower workers’ compensation costs. It also can be tracked in reduced downtime and stronger workforce performance, CraneTech wrote in a blog post.

“When employees understand hazards and supervisors reinforce safe practices, incidents decrease and operations run more smoothly,” said the firm.

Statistics Paint Serious Picture

On construction job sites, forklifts and fall protection continue to be OSHA Top 10 citations — meaning real exposure, real fines and preventable incidents.

CraneTech notes that the risks most likely to impact a contractor’s operation are significant. Falls to a lower level are among the most numerous.

Contact with objects/equipment were logged not only as the cause of a high number of fatalities but a leading source of serious lost-time cases.

“These facts are not theory,” said CraneTech. They come from national datasets, insurance indexes and real-world studies.

“Training is one of the most direct ways companies can mitigate these costs without slowing growth.”

Small businesses often feel the impact of incidents the most, the firm said, which is why small contractors can’t afford not to invest in safety training.

“Even one claim can erase an entire quarter’s profit for a small business,” according to the CraneTech article.

OSHA’s $afety Pays tool estimates direct (medical, insurance) and indirect (overtime, retraining, delays) costs and calculates how much extra sales are necessary to break even.

The OSHA tool estimates direct and indirect costs and calculates how much extra sales are necessary to break even.

Examples of direct costs are medical and insurance expenses, while indirect expenses may include overtime, retraining and project delays.

Running the numbers for your operation against your profit margin is a quick way to show leadership why safety pays, believes CraneTech.

Tri-State Bobcat Hosts Successful 2026 Open Houses

Tri-State Bobcat recently hosted two open house events at its Burnsville, Minn., and Little Canada, Minn., locations, drawing a strong turnout of customers, vendors and community members across both days.

The events gave attendees the opportunity to connect with the Tri-State Bobcat team, explore a wide range of equipment and engage directly with industry representatives. Guests also enjoyed a complimentary lunch and took part in giveaways throughout the events.

The company expressed its appreciation for the strong attendance, noting the value of reconnecting with familiar customers while also welcoming new faces from across

Minnesota.

Tri-State Bobcat also recognized its vendor partners for their support and participation, helping enhance the overall experience for attendees.

Events like these reflect the company’s ongoing commitment to building relationships and supporting the communities it serves. Tri-State Bobcat extends its thanks to everyone who attended and contributed to the success of the 2026 Open Houses.

For more information, visit tristatebobcat.com. 

(All photographs in this article are Copyright 2026 Construction Equipment Guide, except where noted. All Rights Reserved.)

Tri-State Bobcat’s new parts warehouse will be able to stock a large number of parts on site for all its product lines. “This will be a large expansion of what we can have available to our customers without waiting for their parts,” said Ben Johnson, marketing director.

Northern Michigan Tractor to Represent Hyundai CE in Northern Lower Peninsula

HD Construction Equipment Hyundai North America has added Northern Michigan Tractor, based in Johannesburg, Mich., to its growing dealer network. The dealership will sell and service Hyundai’s compact equipment across the northern portion of Michigan’s Lower Peninsula.

Founded in 2019, Northern Michigan Tractor has built a strong presence serving agricultural, property maintenance and light construction customers throughout the region. The addition of Hyundai compact equipment expands the dealership’s ability to support customers with a broader range of machines backed by local service and support.

“Hyundai gives us a strong lineup of compact equipment that fits the kind of work our customers are doing every day in our fast-growing community in northern Michigan,” said Joe Grusczynski, owner of Northern Michigan Tractor. “These machines are straightforward to operate, built to hold up and priced in a way that makes sense for small businesses and property owners. We see a lot of opportunity to put them to work in this market.”

With this addition, Hyundai continues to strengthen its dealer coverage in key regional markets, improving access to equipment, parts and service support for customers across North America.

McCoy Holds Open House in Chippewa Falls, Wis.

Customers and guests of McCoy Construction & Forestry gathered at the company’s facility at 4341 S. Prairie View Rd., Chippewa Falls, Wis., for the annual open house event on April 10, 2026.

The open house featured demonstrations of the newest John Deere equipment with the latest technology, including

full-size and mini-excavators, dozers and compact track loaders. Manufacturer representatives as well as McCoy staff were on hand to assist with details on the machines and answer questions.

Attendees also were treated to lunch and the chance to win prizes.

McCoy Construction & Forestry has 25 locations throughout the Midwest in Michigan, Minnesota,

Wisconsin, Illinois, Indiana and Kentucky, Missouri and Tennessee.

For more information, visit mccoycf.com.

(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)

Concrete News Section

GOMACO Debuts GP348 Concrete Slipform Paver, Placer

GOMACO is building on the success of the GP360 and GP460, a combination concrete slipform pavers and placer/spreaders on two tracks.

This year at ConExpo-Con/AGG 2026, GOMACO introduced the GP348 fourtrack for enhanced job site and job-to-job mobility. As a placer/spreader with a 48 in. belt, the GP348 will place at widths up to 36 ft. wide. As a concrete slipform paver, the GP348 will pave widths up to 30 ft. wide.

It’s built on the framework of the GOMACO four-track GP3 slipform paver with the ability to convert the prime mover into a concrete placer/spreader. The prime mover is equipped with vibrator circuits for paving and auger drive circuits for placing. Controlling the new technology is made possible with the GOMACO G+ digital control system.

G+ handles the controls conversion needed for each applica tion while also bringing on board machine-to-machine (M2M) com munication, sonic sensors, 3D machine guidance and more. Rotary-sen sored slew drives on its leg pivots work with the G+ control system. Operators can automate transitions from transport to paving mode, reducing setup time and improving efficiency, according to GOMACO.

Its four-track design enhances stability and on-site maneuverability, while its compact transport footprint allows it the capability to be hauled on a single semi-tractor trailer (either as a placer or paver), minimizing downtime between pours.

The GOMACO GP348 is powered by a Caterpillar C7.1 turbocharged diesel engine, which drives the conveyor belt and distributes concrete across the grade. The 48 in. conveyor

belt can be mounted on either the left or right side, depending on jobsite conditions and the location of the haul road. It has a discharge speed of up to 491.5 ft./min. for fast and efficient

A controllable material deflector directs the flow of concrete at the discharge end of the conveyor for placement accuracy. A dual-drive auger system moves the material to the center or outer areas and across the strike-off.

The GP348 is available with an optional sonic sensor system to monitor the concrete depth as it is placed. Information from the sonic sensors is used by the G+ control system on the paver using M2M communication to provide an optimum and consistent head of concrete in front of the

The GP348 placer/spreader slipform paver made its world debut at ConExpoCon/AGG 2026 in Las Vegas, Nev. It was part of GOMACO’s display of 13 pieces of equipment showcasing the company’s full line of concrete paving and support

For more information, visit gomaco.com. 

photo

This year at ConExpoCon/AGG 2026, GOMACO introduced the GP348 four-track.

Curb Roller’s Batt Screed II: One Screed From Flatwork to Curb

Crews are being asked to do more with fewer resources. Equipment that can adapt is no longer a luxury — it’s part of staying productive.

The Batt Screed Gen II was built for that shift. It still handles flatwork like sidewalks and slabs, and with about a 5-minute switch to a conversion kit, it can also be used to shape curb. That added versatility removes the need to bring in separate machines or power sources mid-project.

The result is less downtime, less equipment to manage and a smoother workflow from one phase

of the pour to the next.

Being battery-powered keeps things simple on site. No cords, no generators — just quick setup and the freedom to move where the work is.

And when a job calls for something different, we have other options. Hydraulic screeds handle larger pours, and custom drum profiles are available for more specialized shapes and projects.

It’s not always about adding more equipment. It’s about getting more out of what you already have. 

The Element of 3D Technology with

iSlip creates more accurate, intelligent placement of concrete for paving applications producing better yields. Remote access capabilities and machine monitoring lead to higher production rates. The iSlip Control Platform sets a new standard for automated concrete placement. Paired with 3D Stringless Technology, you’ll take your concrete game to a whole new level.

ACCURACY | PERFORMANCE | RELIABILITY

The Worldwide Leader in Concrete Paving Technology

SECTIONAttachments

Bobcat Expands Attachment Lineup With New Solutions

Bobcat Co. continues to invest in attachments as a way for customers to expand jobsite versatility without adding dedicated machines.

In 2025, Bobcat expanded its attachment lineup with new products designed to enhance efficiency, durability and precision, setting the stage for continued innovation and reliable attachment solutions into 2026, according to Bobcat.

“Our customers demand solutions that boost productivity and flex across countless applications,” said Dan Steinlicht, general manager of Bobcat attachments. “These new attachments and implements deliver the trusted performance and reliability of Bobcat, empowering operators to take on more tasks with fewer machines.”

Bobcat introduced a series of new additions in 2025, detailed below, that lay the groundwork for even more innovation in 2026:

Flex-Wing Rotary Cutter

Bobcat flex-wing rotary cutters are designed for clearing brush on large properties, offering cutting widths of 12 to 15 ft. Compatible with utility tractors, these implements feature heavy-duty gearboxes, slip clutch protections and durable blades capable of handling vegetation up to three in. in diameter.

covers and bag splitters enhance ease of use and efficiency, according to Bobcat.

Land Grader

The Bobcat land grader implement is built for grading on driveways, landscaping projects and farm maintenance. Featuring two reversible, heat-treated blades and adjustable skid shoes, the land grader makes for efficient material redistribution, according to Bobcat. Available in multiple widths from 60 to 96 in., it integrates with compact and utility tractors.

Disc Harrows

The Bobcat disc harrow breaks up soil and mix crop residue to prepare seedbeds.

A spring suspension system and adjustable deck height ensures smooth operation across uneven terrain, while a 10-gauge steel deck and replaceable skid shoes provide long-lasting durability, according to Bobcat.

Drop Spreader

Engineered for material placement on sidewalks, paths and driveways, the drop spreader is perfect for winter maintenance, according to Bobcat.

It includes a rust-resistant, stainless-steel hopper, adjustable speed control and weather-tight electronics for durability in harsh conditions. Compatible with utility vehicles, compact tractors and Toolcat utility work machines, optional accessories like hopper

Available in widths from 66 to 90 in., these implements feature a heavy-duty frame supporting four angles disc gangs with adjustable cutting angles for optimal soil penetration. High-carbon steel blades and sealed bearings ensure durability and longterm performance, according to Bobcat. The attachment can be paired with compact tractors and utility tractors.

Middle Buster

Designed for garden prep, subsoiling and planting or harvesting root crops, the Bobcat middle buster implement uses a 14-in. heattreated, double winged blade for strength and precision, according to Bobcat. Its

heavy-duty frame resists rust and wear. The middle buster implement is compatible with select compact tractors.

Bale Spear (Round or Square)

Bobcat has expanded its lineup of bale attachments to include the bale spear. Available in round, medium square and large square models, the bale spear simplifies hay handling with its tapered design and ability to handle all bale types. These attachments have a 3,000 lb. lift capacity and are compatible with multiple Bobcat machines. Built for durability and ease of use, the bale spear is perfect for moving, stacking and loading hay or straw bales for agricultural tasks, according to Bobcat.

Bale Unroller

Lift and unroll large round hay bales with Bobcat’s bale unroller. Designed for efficiency and precision, this implement connects to compact and utility tractors to

streamline heavy bale handling, according to Bobcat.

Broadcast Spreader

The Bobcat broadcast spreader is designed for fast, reliable material distribution across large areas, The attachment offers adjustable speed and gate controls for spreading salt, sand, seed or fertilizer. Its rust-resistant poly hopper and sealed electronics ensure durability, while custom wiring harnesses integrate with utility vehicles, compact tractors and Toolcat utility work machines. This broadcast spreader is ideal for winter maintenance and all-season tasks, according to Bobcat.

Planetary Combination (PC) Auger

The Bobcat PC auger delivers versatility and torque for a wide range of digging applications. It features a combination 2-in. hex and 2.5-in. round shaft on the 12PC and 25PC models. This design allows operators

Blue Diamond Adds to Family of HDX Series Grapples

Blue Diamond Attachments added a new attachment to its growing lineup of grapple and grapple buckets: the HDX rock grapple bucket.

Engineered for skid steers and compact track loaders up to 75 hp or 3,000-lb. lift capacity, the HDX rock grapple bucket joins the Blue Diamond series that includes the HDX root grapple and grapple bucket — attachments designed to grab bulky items in a single load, improving productivity in landscaping and cleanup projects. At 72 in. wide and 39 in. deep, the HDX rock grapple

bucket offers a maximum opening of 32 in., and has dual top clamps constructed of 1/2-in. steel to effectively clear debris and to securely carry rocks, brush or logs. It also can be used as a land plane and for lighter clearing.

The Blue Diamond HDX rock grapple offers key features designed for enhanced durability and performance.

• 3-in. tine spacing with reinforced gussets provide efficiency when sorting finer materials from larger ones.

• Fully welded hydraulic cylinders improve clamping force and increase durability for greater uptime.

• Greasable pivot points reduce wear to extend the attachment life and simplify maintenance.

• Upgraded cylinder and hose protection minimize the opportunity for damage to hydraulics, reducing downtime for repairs.

“For our customers who need a grapple attachment for their mid-duty machines, the HDX rock grapple bucket is the perfect fit, positioned to bridge the gap between our heavy-duty and severe duty models,” said Drew Truan, chief operating officer of Blue Diamond Attachments. “Like all our attachments, this new model can be depended on for its ruggedness and reliability for tough jobs.”

The Blue Diamond HDX rock bucket grapple comes with the Blue Diamond satisfaction guarantee and is backed by a 1-year warranty. For more information, visit bluediamondattachments.com. 

Murphy Tractor & Equipment Co.

murphytractor.com

Park City, KS (316) 942-1457

Great Bend, KS (620) 792-2748

Humboldt, KS (620) 473-7020

Olathe, KS (913) 298-7373

Topeka, KS (785) 233-0556

Ulysses, KS (620) 356-1071

Dodge City, KS (620) 227-3139

Gering, NE (308) 436-2177

Omaha, NE (402) 894-1899

Lincoln, NE (402) 467-1300

Grand Island, NE (308) 381-0741

North Platte, NE (308) 534-7020

Kansas City, MO (816) 483-5000

Springfield, MO (417) 863-1000

Des Moines, IA (515) 263-0055

Fort Dodge, IA (515) 576-3184

Sioux City, IA (712) 252-2753

Waterloo, IA (319) 235-7085

Brunswick, OH (330) 220-4999

Cambridge, OH (740) 439-2747

Canton, OH (330) 477-9304

Cincinnati, OH (513) 772-3232

Columbus, OH (614) 876-1141

Jackson, OH (740) 688-4100

Lima, OH (419) 221-3666

Painesville, OH (440) 639-0700

Poland (Youngstown), OH (330) 629-6299

Rossford, OH (567) 352-7001

Vandalia (Dayton), OH (937) 898-4198

Bobcat Attachments Offer Versatility, Enhance Efficiency

to use both 2-in. hex and 2.5-in. round output shafts with a single auger drive.

As a result, operators have greater flexibility when selecting bits for different hole sizes and soil types. The auger offers high-speed, low-torque performance for softer soils. It also delivers higher-torque, lower-speed power for conditions such as rock, clay, shale and frost. Designed for use with multiple carriers, the PC auger is compatible with skid-steer loaders, compact track loaders, mini excavators and Toolcat machines.

Mini Pallet Fork

The mini pallet fork attachment is engineered for small loaders and mini track loaders, offering a compact solution for lifting and transporting materials. Its manually adjustable 36-in. forks meet ISO standards for strength and durability, making it ideal for landscaping, construction and agricultural tasks. The brick guard design enhances visibility and safety, while compat-

ibility with Bobcat’s quick-attach system ensures easy installation, according to Bobcat.

Brush Grapple

Bobcat’s brush grapple attachment provides clamping force for handling brush, roots and debris. Its wide opening accommodates bulky materials, while belowgrade capability helps remove stubborn vegetation. A simple single-cylinder design reduces maintenance, and protected hose rout-

ing improves reliability. Lightweight construction maximizes lift capacity, making it perfect for land clearing, trail maintenance and farm cleanup, according to Bobcat.

High Flow Planer

The Bobcat high flow planer is engineered for milling asphalt and concrete, leveraging increased hydraulic horsepower for demanding applications. It features dual direct-drive motors for maximum

torque, hydraulic side-shift for flush cuts along curbs and freefloating oscillation to maintain consistent depth even on uneven surfaces.

Fingertip in-cab controls allow operators to adjust depth and angle on the go, while integrated priority valves ensure uninterrupted cutting power during adjustments. Optional water kits provide dust suppression and bit lubrication, making this attachment ideal for roadwork, utility installation and surface preparation task, according to Bobcat.

Stump Bucket

The stump bucket is a heavyduty, non-hydraulic attachment designed for digging, prying and removal of tree stumps, roots and large rocks. Its long, tapered profile and serrated side plates slice through tough soil, making it ideal for land clearing, trenching and site preparation, according to Bobcat.

Equipped with weld-on Esco teeth for maximum penetration and durability, the bucket’s rein-

forced structure ensures strength under extreme loads, according to Bobcat. Compatible with skidsteer and compact track loaders, it offers a solution for excavation tasks without the need for hydraulic components.

Hydraulic Rotating Log Grapple

The rotating log grapple is designed to deliver precision and efficiency for forestry, landscaping and grounds maintenance applications. Featuring 360-degree continuous hydraulic rotation, it allows operators to reposition logs and brush without moving the loader, minimizing ground disturbance and improving productivity, according to Bobcat. Integrated features such as a tree pusher and rope bollards provide more controlled felling. Compatible with select mini track loaders and small articulated loaders, this attachment offers maneuverability and reduced operator fatigue, according to Bobcat. For more information, visit bobcat.com.

Aggregate Production and Recycling Section

Metso Launches Flip-Flow Screens for Fine Dry Screening

Metso launched the Metso GFF Series flip-flow screens, engineered for efficient fine dry screening of difficult and often moist materials.

The new design delivers stable classification in demanding conditions and enables finer cut sizes required in applications such as sand manufacturing in aggregates segment and high-pressure grinding rolls (HPGR) based closed circuits in mining segment, according to Metso.

By strengthening the screening stage, the GFF Series helps customers improve energy efficiency, reduce circulating loads and lower water usage, enhancing productivity in fine product making and comminution process-

applications and 0.01 in. in wet applications, while minimizing blinding and pegging. Compared with traditional screening solutions, this results in higher efficiency, reduced process water demand and less energy wasted in downstream grinding, enabling more efficient flowsheet design.

Practical field performance has been a key design driver. The flip-flow deck’s anti-blinding behavior reduces unplanned stoppages, while straightforward access, rugged construction and easy serviceability support faster maintenance, higher availability and a lower total cost of ownership.

“Our customers have been asking for a high-performance

needed to support HPGRs and the overall comminution process, making the screen a true enabler of circuit performance.”

Beyond mining and aggregates, large-scale fine dry screening also opens new opportunities in applications such as biomass, fertilizers, construction waste recycling and industrial minerals.

More Efficient HPGR Circuits

Classification plays a critical role in HPGR flowsheets, influencing energy consumption, circulating loads and productivity. The GFF Series widens the technical envelope for fine cut sizes and throughput, enabling more accurate classification ahead of downstream grinding. The resulting finer particle size distribution improves the efficiency of the entire

“The much finer screen cuts achieved with flip-flow technology are a major advantage for future HPGR circuits,” said Stefan Sakendorf, director, HRC products of Metso. “More accurate classification allows a greater share of the workload to be handled by energy-efficient HPGRs and strongly supports the implementation of highly efficient HRCe–Vertimill circuits.”

Expanded Screening Portfolio, Full Flowsheet Solutions

The GFF Series further expands Metso’s screening portand strengthens its end-to-end comminution offering.

Following the introduction of the Grande Series screens in 2025, Metso now offers fit-for-purpose solutions ranging from coarse, high-capacity applications to demanding fine dry screening.

Combined with Metso’s screening media, life-cycle services, HRCe HPGRs, grinding mills and digital tools, the GFF Series positions Metso as a full flowsheet partner for customers seeking higher productivity, lower energy consumption and reduced water dependency, according to Metso.

For more information, visit metso.com/. 

Metso photo

Metso launched the Metso GFF Series flip-flow screens, engineered for efficient fine dry screening of difficult and often moist materials.

FROM REDUCTION TO SHAPING

BUILT TO CONNECT

www.rolandmachinery.com

Escanaba, MI

906-786-6920

DePere, WI

920-532-0165

DeForest, WI

608-842-4151

Eau Claire, WI

715-874-5400

Franksville, WI

262-835-2710

Schofield, WI

715-355-9898

Slinger, WI

262-644-7500

www.rmsequipment.com

Savage, MN

800-888-9515

Des Moines, IA

800-555-1445

Cedar Rapids, IA

800-616-6615

Sioux City, IA

800-633-9104

East Moline, IL

800-633-9114

Duluth, MN

800-888-9535

Virginia, MN 800-752-4304

www.vlpco.com

4100 Gardner Avenue

Kansas City, MO

64120

866-928-4055

816-241-9290

Garden City, KS

800-511-1435

Joplin, MO

417-781-8222

Topeka, KS 785-267-4345

Wichita, KS 316-838-3346

www.brandeismachinery.com

Bowling Green, KY

270-780-3004

Corbin, KY

606-528-3700

Lexington, KY

859-259-3456

Louisville, KY

502-491-4000

Paducah, KY

270-444-8390

Stanville, KY 606-478-9201

Evansville, IN 812-425-4491

Ft. Wayne, IN 260-489-4551 Indianapolis, IN 317-872-8410

www.aisequip.com

3600 N Grand River Ave Lansing, MI 48906

517-321-8000

Grand Rapids

600 44th Street SW Grand Rapids, MI 49548

616-538-2400

Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

Saginaw 4600 AIS Drive Bridgeport, MI 48722 989-777-0090

Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060

West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

www.butlermachinery.com

3630 Miriam Ave Bismarck, ND 58502

701-223-0890

7910 US-2

Devils Lake, ND 58301 701-665-3800

2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400

3402 36th St SW Fargo, ND 58104 701-280-3100

1201 S 46th St Grand Forks, ND 58201 701-775-4238

1910 27th Ave SE Jamestown, ND 58401 701-251-1400

4950 U.S. Highway 12 Aberdeen, SD 57401 605-225-6240

3601 Deadwood Ave N Rapid City, SD 57702 605-342-4850

20571 Truck Stop Ave Pierre, SD 57501 605-224-5400

3201 N Louise Ave Sioux Falls, SD 57107 605-336-3010

603 10th St NW Watertown, SD 57201 605-954-7100

1715 US Hwy 14 W Huron, SD 57350 605-353-1200

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508

www.centralsands.com

4219 E 50th St • Des Moines, IA 50317 800-247-2400 • 515-964-8600

www.rbscott.com

1011 Short St Eau Claire, WI 54701 715-832-9792

17403 County Road 75 NW Clearwater, MN 55320 320-558-8100

www.roadbuildersmachinery.com

1001 S 7th St Kansas City, KS 913-371-3822

4115 S 90th St Omaha, NE 402-331-9200

5601 Fletcher Ave Lincoln, NE 402-325-0447

4949 Juergen Rd Grand Island, NE 308-384-2620

1303 S Chestnut St Norfolk, NE 402-316-4640

Indiana & Michigan

DRILLS & COMPRESSORS

Coming In: (2019) Sandvik DX800, with approx 8700 hrs & 3100 impact hrs on HF820 hammer. Running & working currently. #510099-Tamrock DHA550 self-contained hydraulic drill, Deutz air cooled engine. Has 1185 impact hours. Good condition. #580000-Furukawa HD712 drifter, approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII.

Ready to be installed for operation.

#530029 Ingersol Rand ECM370, self-contained rock drill w/ VL140 hammer & Cummins engine.

#510138 (2022) John Henry JH20 drill on Komatsu PC210LC with 3489 hours & 1500 drifter hrs. John Deere compressor and 4045 Tier 3 engine. Set up for T51 steel w/ 20′ lead & 18′ changes.

#510137 (2005) Atlas Copco ECM-585 MC with 9461 hrs on Cummins engine (been replaced) & 6782 impact hours.

#520036 (2006) INGERSOL-RAND P185 PORTABLE/TOWABLE AIR COMPRESSOR, 82 HOURS

ROCK CRUSHERS & FEEDERS

SCREENS & WASH EQUIPMENT

#141172 (New) Anaconda SR514 3-deck finishing screen hydraulic tip grizzly (4”) on 14’ hopper with 4-ply belt feeder and radio remote. 125 hp JCB 444 engine. Variable speed on all stockpile conveyors & reversable transfer conveyor.

#152027 Ortner model 3000 sandscrew. with 5hp electric motor. Rated at 50-125 TPH capacity. Very Good Condition. #141175 (2023) Finlay 883T scalping screen, 1" screen in top deck & 3/4" screen on bottom. Good cond.

#142003-Deister 5x16 2-deck horizontal, underslung screen with new bearings #141167 Deister BHT2616 (6x16 2-deck) screen, with 218 hrs on Deutz engine. Apron feeder & 3 discharge conveyors.. #142005 El Jay 5x14 2-deck screen on single axle chassis. electric motor & 36" x 24' underconveyor

EARTHMOVING

OH 45050 513-649-8105

#1111085 Portable Pioneer 3042 jaw with 42"x16' VGG, 42" underconveyor, & 150hp motor on shopbuilt chassis. #118000-New/never used Universal 2036 jaw crusher parts, including: Jaw plates, toggle seats, toggle plates, spring loaders, and all thread rods.

#111083 (2015) KLEEMAN MZ110i TRACK-MOUNTED JAW CRUSHER, (27X43″) with 5374 HRS

#111080 (2023) RubbleCrusher RC150T portable, diesel/hydraulic, self-contained 26"x14" jaw crusher, on rubber tracks with 420 hours. 38hp Yanmar engine. 64"x50" feed hopper & discharge conveyor.

#121054 (1996) CEDARAPIDS MODEL 2100 VSI CRUSHER, 4-SHOE TABLE, ROCK SHELF, & 300HP MOTOR

#410065 1980 Cat D7G dozer, with 5028 HMR. EROPS cab with sweeps, A/C, & heat (did not test a/c). Straight blade with tilt & 2-barrel, multishank ripper. Good running dozer. #610137-1995 John Deere 644G Loader, unknown hours and 3 3/4 yard bucket. Good rubber and runs great, overall good condition. #410063-CAT D9H, EROPS cab w/ A/C, straight blade w/tilt. Single shank, 4-barrel ripper. 24" pads. U/C (overall approx 70%). Rebuilt engine, trans, and finals (HMR 2994) Left Trunnion is available but needs to be installed. Overall good condition. #700001 CAT 12F MOTORGRADER (1970), power shift, hydraulic

TREES,BRANCHES,LIMMBS,AND STUMPS

ARE NO MA ,, ATTCH FOR A B From roadways to right-of to road clearing, get your w more efficiently than ever machinery! Choose from d sizes to suit your needs. C yours or to request a dem , BANDIT® -ways, lot clearing ork done faster and before with Bandit ifferent styles and all today to reserve onstration.

5255 N Deere Rd Park City, KS 67219 316-942-1457

325 S Highway 281 Great Bend, KS 67530 620-792-2748

murphytractor.com

6100 Arbor Rd Lincoln, NE 68517 402-467-1300

3204 S Engleman Rd Grand Island, NE 68803 308-381-0741

1141 Kanza Drive, Humboldt, KS 66748 620-473-7020

15854 S US 169 Hwy Olathe, KS 66062 913-298-7373

3701 S Jeffers St North Platte, NE 69101 308-534-7020

8600 NE Parvin Rd Kansas City, MO 64161 816-483-5000 1401 S State Highway MM Springfield, MO 65802 417-863-1000

1621 NW Gage Blvd Topeka, KS 66618 785-233-0556 1410 W Oklahoma Ave Ulysses, KS 67880 620-356-1071

5087 E Broadway Ave Des Moines, IA 50317 515-263-0055

10893 112 Rd Dodge City, KS 67801 620-227-3139

220810 Hwy 92 Gering, NE 69341 308-436-2177

9751 S 148th St Omaha, NE 68138 402-894-1899

1303 3rd Ave NW Fort Dodge, IA 50501 515-576-3184

4900 Harbor Dr Sioux City, IA 51111 712-252-2753

3469 W Airline Hwy Waterloo, IA 50704 319-235-7085

www.BrandeisMachinery.com

1801 Watterson Trail Louisville, KY 40299 502-491-4000

17000 Highway 41 North  Evansville, IN 47711 812-425-4491

7310 Venture Lane Fort Wayne, IN  46818 260-489-4551 8410 Zionsville Road Indianapolis, IN  46268 317-872-8410

535 Modern Way Bowling Green, KY 42101 270-780-3004

1484 American Greeting Card Rd Corbin, KY  40701 606-528-3700

1389 Cahill Drive Lexington, KY  40504 859-259-3456

160 County Park Road Paducah, KY  42001 270-444-8390

130 Mare Creek Road Stanville, KY  41659 606-478-9201

MoDOT’s Improve I-70 Project Requires Mass Excavation

miles of Interstate 70, from Blue Springs to Wentzville,” Eric Kopinski, Improve I-70 program director, told Construction Equipment Guide.

“The Missouri Department of Transportation (MoDOT) has worked to establish the best plan to be efficient and innovative in how this will be delivered. The Columbia to Kingdom City project was selected as the first project of the program, as this portion had already completed all the environmental requirements.”

As of May 2025, the Improve I-70 individual project limits have been updated and now include eight total project segments across the state. Total completion of the corridor is anticipated by the end of 2030.

Kopinski said providing a third lane of travel for eastbound and westbound Interstate 70 from Columbia to Kingdom City is critical.

“The safety and economic prosperity of Missourians depend, in part, on an I-70 that grows along with the state and nation. That’s why MoDOT is working to improve I-70. The third lane, along with all of the other improvements being made along the corridor, will put Missouri in position to have quality and safe roads for years to come.

“Additionally, when incidents occur on I70, it typically shuts down both available lanes of traffic in that direction. By providing a third lane, MoDOT hopes to be able to keep traffic moving safely and efficiently when incidents occur.”

Enhancing I-70/U.S. 63 and I-70/U.S. 54 interchanges will result in better traffic flow and movement of freight.

“The I-70 and U.S. Route 63 interchange currently experiences some of the highest traffic volumes in the state,” said Kopinski. “Reliability over the years has become poor. Motorists who utilize this area find there isn’t a great way to determine how long it will take to travel through. As the project team looked at increased traffic projections for the next twenty years, the interchange as it exists today becomes even more congested and unreliable.”

This design-build project was awarded in February 2024. When completed in December 2027, this improved interchange will help with connectivity and redundancy for the interchange.

“The most heavily traveled movements will also be removed from the interchange through use of direct connections [eastbound I-70 to southbound U.S. Route 63] and flyover ramps [northbound U.S. Route 63 to westbound I-70]”, Kopinski explained. “By using advanced traffic modeling, the area also is assured these improvements will continue to be effective for years to come.

“By changing the vertical clearance of

several overpasses, the ability to more efficiently move freight along I-70 in this area will greatly improve.”

Changes to the I-70 and U.S. Route 54 interchange include reconstructing the current diamond interchange into a large dual-lane roundabout. This eliminates the existing signals and accommodates larger radii for semi-trucks navigating the interchange.

It allows these vehicles to remain moving, where previously they would be stopped at the current signalized intersections. It permits semi-trucks and passenger vehicles to travel at a more consistent speed, providing constant flow through the interchange. The I-70 exit ramp will be constructed to accommodate the large amounts of traffic produced by Lake of the Ozarks traffic on summer weekends and holidays.

According to Kopinski, the I-70 corridor is vital to the state and the region.

“By connecting the two largest cities in the state — Kansas City and St. Louis —

projects for MoDOT,” said Kopinski. “Their commitment to safety and quality on major projects has allowed them to hit the ground running with this complex project.”

There are 60,000 daily travelers who depend on this section of I-70, which is a major concern while improvements are being made.

“Getting each and every one of them to slow down and stay alert is the biggest challenge,” said Kopinski. “The project team has experienced an increase in distracted driving, which only compounds the challenges.”

Currently, there’s significant utility coordination taking place, along with earthwork grading, concrete paving and bridge work. Approximately 125 workers are working day and night, six days a week, to complete the aggressive schedule.

Significant paving and bridge work remain within the project limits; however, paving of the third lane in each direction along I-70 has been completed along a 7-mi. section of roadway in central Missouri. This progress includes significant earthwork, paving a new lane eastbound and westbound and completely reconstructing the existing two lanes of I-70 pavement with new fulldepth concrete.

Crews will reconstruct roughly 100 lane miles of full depth concrete pavement and will construct or rebuild 27 bridges and modernize two significant interchanges. All the work will be done while minimizing impacts to the traveling public and local area.

this corridor has over $113 billion of the national GDP depending on the corridor.

With Kansas City and St. Louis being the second and third largest rail hubs and third and eighth largest ports on the Mississippi River, this corridor is crucial to both local businesses and residents. The I-70 statewide corridor is one of the most critical routes for freight in the Midwest.”

Kopinski noted that improvements along I-70 across the state have been discussed at various levels for the past three decades.

“With funding now in place and traffic impacts significant, the public has shown a great deal of understanding and patience with the construction. Having an aggressive schedule has been welcomed by the local businesses and residents, as everyone is excited about how the system will be improved when construction is completed.”

Millstone Weber was selected as the project’s general contractor.

“Millstone Weber has a long history of delivering some of the most challenging

One of the box culvert replacements required the contractor to deal with a 45-ft. excavation while keeping I-70 traffic moving just a few feet away. A carefully planned design and careful construction with effective temporary shoring helped the replacement be successful.

Approximately 1,000,000 cu. yds. of dirt will be moved on the project. Heavy equipment includes cranes, multiple pavers, placers, dozers and dump trucks. The chief material is concrete.

“The original pavement on I-70 is from the late 1950s,” said Kopinski. “It’s been almost 70 years since we’ve done significant paving on I-70. Every night there’s around 1,500 to 2,000 cu. yds. of concrete placed on I-70.”

The work can be difficult and the hours long, but Kopinski said the team is staying focused.

“When construction is complete, this will be transformational in the area, and will put Missouri in a position to have one of its most important corridors ready for the next generation. By completing this historic project on time and on budget, it will put Missouri in excellent position to grow for decades to come.”  CEG

SECTION Trucks & Trailers

Stellar Introduces Redesigned Large OTR Tire Truck

Stellar Industries has recently introduced an updated design for its large off-the-road (OTR) tire trucks.

Built to meet the evolving needs of tire service professionals across industries, the redesigned body incorporates several new features that enhance functionality and versatility.

Stellar large off-the-road (OTR) tire service trucks are engineered to handle the industry’s largest off-the-road tires in demanding environments. Designed and manufactured in the United States, these heavy-duty trucks combine a high-capacity carrier, advanced tire manipulator and onboard air system into a single mobile tire service solution.

With carrier and tire manipulator capacities ranging from 4,600 to 16,500 lbs. and steel body lengths from 15 to 20 ft., the trucks are built to efficiently manage large OTR tires while supporting a fully equipped tire service operation, according to Stellar. An onboard air compressor, tire transport capability and ample tool storage allow a single technician to perform service directly at the job site, reducing response times and minimizing downtime.

Exclusive features on Stellar large OTR tire trucks include a hexagonal boom design for increased strength and reduced flex, a worm gear-driven rotation system, radio remote and manual controls and a modified A-frame stabilizer system with out-anddown outriggers for enhanced stability across varying terrain on most models. A heavy-duty steel body with reinforced components and corrosion-resistant undercoating ensures long-term durability in tough operating conditions.

With new options and enhancements, the refreshed large OTR body can be configured to meet the specific needs of the job at hand, all while withstanding demanding

work environments and harsh weather conditions.

New features include:

• Integrated mounting rails are welded

on top of the vertical compartments to allow for work lights to be drilled directly into the rail, rather than into the compartment itself. By limiting drill holes in the compartment

itself, the structure is better protected from weather. In addition to long-term durability, integrated rails give customers greater flexibility in lighting placement to better serve their needs.

• Stainless steel compartment latches enhance both appearance and performance. These new latches provide a professional look and allow a larger clear opening for more accessory options. Stellar also has expanded the toolbox system offering for large OTR trucks, giving customers the option to choose between two or four 3-in. drawer sets to be installed in the compartment.

• Adjustable compartment configuration allows customers to choose shelving and layout options based on their needs. Shelving can be added or removed based on the tools, equipment and parts they use most often. Options like an inverter to be added to the truck with an integrated outlet and cordless tool storage showcase the ability for the large OTR tire truck to be built to meet the precise needs of the job at hand.

• Enhanced LED compartment lights ensure compartments are brightly illuminated, helping operators quickly locate tools and parts even in low-light conditions.

• Additional D-rings have been incorporated throughout the flatbed to improve tire securement options during transportation. These enhancements apply to all OTR models, including the TM4110/9000, TM6116/13500, TM7120/17000, TM12154/23000 and TM16160/28000. The evolutions reflect Stellar’s continued commitment to designing work trucks that are not only built to last, but also built to work the way customers need them to, according to Stellar.

For more information, visit stellarindustries.com. 

East Trailers Accelerates Growth With Its New Manufacturing Line Expansion

East Trailers LLC is fueling its next phase of growth with a major expan sion that will increase production capacity, create 175 new jobs, retain 435 existing positions and include a $3 million capital investment in its operations.

In support of the project, the Ohio Department of Development approved a tax credit during today’s Ohio Tax Credit Authority meeting, reinforcing confidence in East’s continued impact and momentum.

Since joining Fultra in 2023, East Trailers has accelerated its momentum and will expand its portfolio to include proven trailer products from its parent company, unlocking new levels of innovation. This investment will significantly boost production capacity and introduce advanced design capabilities, positioning East to deliver even greater performance, versatility and value to customers, according to the company.

“Being the preferred partner in trans-

portation starts with showing up consistently and meaningfully in the communities and markets we serve,” said Chris Olson, president and CEO of East Trailers LLC. “For nearly 60 years, East has been built on the strength of our people, our products and the partnerships we’ve forged across a growing network of more than 35 dealers with over 100 locations throughout the United States and Canada. That foundation continues to drive how we serve our customers and how we lead the industry forward.

“By maintaining open, ongoing dia-

logue with our customers, we stay focused on what matters most to them and help shape a smarter, more capable path forward. As we introduce new products and service capabilities, we’re strengthening our ability to support customers at every stage of their operation. Combined with our continued investment in local communities and a forward-looking approach to growth, we are positioning East to lead and redefine performance in the vocational truck body and trailer industry.”

This investment demonstrates how a coordinated ecosystem including the city of Randolph, Portage Development Board, ODOD, JobsOhio and Team NEO, can come together to help companies grow.

For more information, visit East-Trailers.com. 

Farm-Rite Equipment Inc.

www.farmriteequip.com

Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325

320-275-2737

Toll Free: 888-679-4857

Willmar 1515 West Litchfield Ave. Willmar, MN 56201

Toll Free: 877-484-3211 320-235-3672

St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304

Toll Free: 844-262-2281 320-240-2085

Long Prairie 19612 US Hwy 71 Long Prairie, MN 56347 Toll Free: 866-514-0982 320-732-3715

Diamond Equipment, Inc.

www.diamondequipment.com

Indiana 1501 Lynch Road Evansville, IN 47711

Toll Free: 800-258-4428

812-425-4428

2000 Harlan Drive Terre Haute, IN 47802

Toll Free: 888-343-4747 812- 299-4747

Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273

Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061

McCann Industries, Inc. www.McCannOnline.com

Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000

Bolingbrook

250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770

Channahon

23921 S. Northern Illinois Drive Channahon, IL 60410 815-467-4480

Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200

Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110

Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800

Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800

Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545

Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444

Marne 1064 Franklin Street Marne, MI 49435 616-371-7250

Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 Ziegler CAT www.zieglercat.com

8000 County Road 101 East Shakopee, MN 55379 800-352-2812

13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847

Alta Equipment Company www.altaequipment.com

8840 Byron Commerce Drive SW Bryon Center, MI 49315 616-878-7450

56195 Pontiac Trail New Hudson, MI 48165 248-356-5200 1061 Stepke Court Traverse City, MI 49685 231-714-6210 5105 Loraine Street Detroit, MI 48208 313-394-1811

G 3283 S Dort Hwy Burton, MI 48529 810-744-4840

3725 Old 27 S Gaylord, MI 49735 989-731-9988

7500 E 15 Mile Rd Sterling Heights, MI 48312 568-474-5063 1035 Wylie Drive Bloomington, IL 61705 309-585-3800

613 E Stevenson Rd Ottawa, IL 61350 815-313-2070

www.companywrench.com

4805 Scooby Lane Carroll, OH 43112 866-294-6103

1515 W. Epler Avenue Indianapolis, IN 46217 317-782-8850

1330 KY-151 Frankfort, KY 40601 502-699-2681

866-294-6103

866-294-6103

Kenworth Announces Reinforced Front Frame Option for T880, T880S Models

Kenworth announced the availability of its new reinforced front frame structure option for T880 and T880S models.

The front frame structure feature consists of reinforced front-of-frame castings, crossmembers, kicker braces and an implement plate located behind the bumper. This design delivers a high-strength mounting location ideal for a variety of front-of-frame-mounted equipment such as hose reels, snowplows, steady legs and more.

This factory preparation eliminates the need for aftermarket front suspension modifications, saving both time and money during the upfitting process. By offering a ready-to-use solution, Kenworth enables faster turnaround and reduces labor costs for fleets and body builders. The Kenworth front-of-frame structure serves as an effective alternative to traditional parent rails for applications that do not require a front engine PTO (FEPTO) drive, according to Kenworth.

announced the availability of its new reinforced front frame structure option for T880 and T880S models.

By using the front frame structure instead of a parent rail solution, the installation of equipment is simplified and no modifications to the hood or cooling module are required to package the new components. This helps preserve the T880’s visibility from the driver’s seat and eliminates the need for unique parts in this configuration.

Kenworth’s new front frame structure option continues to

make the T880 platform even more flexible for body upfitters. This factory-installed, factory-warranted option reduces the time and cost to the end user and body builder once the truck arrives, increasing quality and consistency while reducing time to in-service new units.

The front frame structure option is now available to order for the T880 with the set-forward front axle configuration (T880S). The T880 in set-back front axle configurations will be available in mid to late 2026. 

Leer Strengthens Fleet Sales Team With Addition of Industry Veteran Randi Carr

Leer Group is expanding and strengthening its fleet sales team with the recent appointment of Randi Carr as its new fleet sales manager.

Carr brings more than 20 years of sales leadership experience across fleet, commercial and aftermarket segments to her new leadership role, where she’ll drive continued growth within Leer Group’s fleet and commercial vehicle markets through new business development and strategic account expansion.

“Randi is known for her strong customer focus, collaborative leadership style and ability to execute in complex, operations-driven environments,” said Mike Spencer, director of sales of Leer Group. “Her experience managing national accounts, negotiating long-term agreements and leading cross-functional teams will be a valuable asset as Leer Group continues to expand its fleet and commercial business.”

Prior to joining Leer Group, Carr most recently served as director of parts, service and warranty at Texas-based Capacity Trucks & Mobile Products, an industry leader in terminal and warehouse truck products.

“I am thrilled to join the incredible team at Leer Group and help continue its growth in fleet and commercial sales,” Carr said. “Across each of our well known brands, we offer a robust, high-quality product lineup designed to meet the unique needs of any fleet.”

For more information, visit leer.com. 

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000

600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400

65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090

8300 M-72 East Williamsburg, MI 49690 231-267-5060

56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

www.brookstractor.com

1900 West Main Street Sun Prairie, WI 53590 608-837-5141

12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790

1031 Lawrence Dr. De Pere, WI 54115 920-336-5711

5429 Prairie Dr. Plover, WI 54467 715- 254-2777

1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700

455 West Ave. North West Salem, WI 54669 608-786-2644

2900 Bicycle Street Sparta, WI 54656 608-351-2101

rmsequipment.com

5633 Highway 13 W Savage, MN 55378 952-895-9595

101 Country Club Rd, SE Byron, MN 55920 507-701-0199

314 Garfield Avenue Duluth, MN 55802 218-727-8611

315 Hoover Road N Virginia, MN 55792 218-741-9011

3001 Oxbow Ct SW Bondurant, IA 50035 515-282-0404

10740 High Life Court SW Cedar Rapids, IA 52404 319-363-9655

1400 North Highway 75 Sioux City, IA 51105 712-252-0538

3150 5th Avenue East Moline, IL 61244 309-755-7203

75 US Hwy 41 East Negaunee, MI 49866 906-475-6488

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

www.mnequipmentsolutions.com

13725 Main Street Rogers, MN 55374 763-428-4107

877-282-3600

Tri-State Bobcat Launches New Online Parts Store Designed for Quick Purchase

Tri-State Bobcat has officially launched its new online store, giving customers the ability to shop parts, tools and select equipment online anytime.

The new platform was designed to make it easier for customers across Minnesota, western Wisconsin and beyond to quickly find and purchase the parts they need. With a growing inventory of products from trusted brands, the site offers a more convenient way to keep equipment running without the need to visit a physical location.

The online store features a streamlined shopping experience, allowing users to search by brand, part number or category. Customers can browse a wide selection of genuine parts and tools, with clear product information to help ensure the right fit for their equipment.

The new platform was designed to make it easier for customers across Minnesota, western Wisconsin and beyond to quickly find and purchase the parts they need.

This launch represents a continued investment in improving the customer experience and expanding access beyond Tri-State Bobcat’s four locations. By offering online ordering, the company is able to better serve both local customers and those outside its immediate service area.

Tri-State Bobcat encourages customers to explore the new site and take advantage of the convenience of ordering parts online.

For more information, visit shop.tristatebobcat.com. 

American State Equipment Receives Liebherr LRB 19 Piling, Drilling Rigs

Midwest-based company, American State Equipment (ASE), took delivery of two Liebherr LRB 19 piling and drilling rigs at ConExpo 2026.

As a heavy equipment, foundation and crane rental company, ASE offers more than 1000 Liebherr machines, spanning across multiple divisions including earthmoving and material handling technology, duty cycle crawler cranes and deep foundation equipment.

“After success with many LRB 18s, the new LRB 19, with its increased capabilities, was a no-brainer addition to our rental fleet,” said John Myers, COO of ASE. The Liebherr LRB 19 piling and drilling rig will be rented for ground improvement, pile driving, as well as drilling applications.

With a partnership spanning more than 50 years, American State Equipment is Liebherr USA Co.’s oldest and largest dealer providing sales and rentals across the country with a focus in the Midwest. This latest acquisition continues to showcase the trust and loyalty between the two familyowned companies.

Deep Foundation Solutions

Liebherr piling and drilling rigs cover an extensive range of applications including piling, vibrating, pressing and drilling. With the appropriate attachment tool, many deep foundation methods can be used with a Liebherr deep foundation machine.

The Liebherr LRB 19 piling and drilling rig is designed

Liebherr photo American State Equipment took delivery of two Liebherr LRB 19 piling and drilling rigs at ConExpo 2026.

for all common deep foundation applications, such as piling and vibrating applications as well as drilling with Kelly equipment, double rotary head, full displacement tool or soil mixing. The name LRB 19 refers to the maximum travel distance of the carriage of 62 ft. (19 m.).

The attachments can be changed using the hydraulic quick connection system without the operator having to leave the cab. All hydraulic, mechanical and electrical connections are automatically coupled. Improved hose routing also optimizes work process on site, and a 450 kW motor provides the necessary power for all applications. For more information, visit liebherr.com. 

McCann Industries Inc. 543 S Rohlwing Rd. Addison, IL 60101 630-627-0000

1360 N Rand Rd. Wauconda, IL 60084 847-526-9444

23921 S Northern Illinois Dr. Channahon, IL 60410 815-467-4480

www.McCannOnline.com

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

DeForest, WI 608-222-9191

Eau Claire, WI 715-832-3443

De Pere, WI 920-338-5800

Marathon, WI 715-443-6000

Negaunee, MI 906-475-4181

www.miller-bradford.com

Kubota Breaks Ground On New Kansas Construction Equipment Test Center

Kubota North America marked a significant expansion of its compact construction business with the groundbreaking of a new construction equipment test center in Salina, Kan.

The $30 million investment reinforces Kubota’s long-term commitment to designing, engineering and validating compact construction equipment in North America for customers across the region. The 57,000 sq.-ft. facility will support Kubota’s expanding construction equipment line-up by accelerating development cycles and improving local fieldvalidated performance.

“This investment reflects Kubota’s confidence in the North American construction market and our commitment to engineering machines that are built for the realities of North American job sites,” said Brian Arnold, general manager of Kubota’s North American manufacturing unit. “Bringing expanded testing and validation capabilities to the U.S. strengthens our supply chain, accelerates development and ensures we deliver high performing compact equipment our customers can count on, supported by a strong dealer network focused on service, parts availability and keeping customers productive on the job.”

martinequipment.com

Goodfield, IL 309-965-2502

Peru, IL 815-224-4711

Rock Island, IL 309-787-6108 Springfield, IL 217-528-4347

Tolono, IL 217-485-6755

Cedar Rapids, IA 319-365-0515

Dubuque, IA 563-588-1950

Columbia, MO 573-657-2154

Palmyra, MO 573-769-2274

murphytractor.com

Park City, KS 316-942-1457

Great Bend, KS 620-792-2748

Humboldt, KS 620-473-7020 Olathe, KS 913-298-7373

Topeka, KS 785-233-0556

Fort Dodge, IA 515-576-3184

Kubota’s Construction Equipment Research and Development North America (CERDNA) operation was established in 2021 in Salina to bring engineering, testing and validation activities closer to customers, ensuring equipment is engineered specifically to meet North American jobsite demands. This additional investment by Kubota North America represents the next phase in their growing construction equipment business.

The building design will be executed by Great Plains Manufacturing (GPM), a Kubota subsidiary, and will enable rigorous performance, durability and reliability testing under controlled, repeatable conditions that replicate real-world

construction applications. This enables Kubota construction equipment to meet the performance, durability and uptime expectations of professional operators and fleet customers across North America.

“This expansion is a clear statement of Kubota’s longterm commitment to investing in America and growing our compact construction business here,” said Todd Stucke, president of Kubota North America. “Kansas has been a strong partner, and the Salina facility will play a critical role as we continue to expand our construction equipment portfolio and support customers across North America.”

Kubota remains committed to the North American market through long-term investments that deliver superior engineering solutions for construction business owners, supported by a local dealer network focused on maximizing uptime and keeping their customers’ operations running efficiently every day.

For more information, visit kubotausa.com. 

John Deere Brings Nearly 50 Additional Employees Back to Work in Iowa, Kansas

John Deere announced that nearly 50 additional employees will return to work in April 2026 across its Dubuque Works and Davenport Works facilities in Iowa and Coffeyville Works in Kansas. The callbacks support growing production needs in construction, forestry and drivetrain component operations.

Earlier this year, John Deere announced multiple rounds of employee callbacks at several United States manufacturing facilities, reflecting improving market conditions and increased production demand across several product lines. With this latest round, approximately 324 United States-based employees have returned to work at John Deere since January 2026.

Details

Employee Callbacks:

• 21 employees to Dubuque Works (Dubuque, Iowa)

• 20 employees to Davenport Works (Davenport, Iowa)

• 8 employees to Coffeyville Works (Coffeyville, Kan.)

Factory needs:

• Employees are returning to support general factory needs in fabrication, assembly and material handling.

Timeframe:

• Employees were scheduled to return to work in April 2026. 

Ulysses, KS 620-356-1071

Dodge City, KS 620-227-3139

Gering, NE 308-436-2177 Omaha, NE 402-894-1899

Lincoln, NE 402-467-1300

Grand Island, NE 308-381-0741

North Platte, NE 308-534-7020

Kansas City, MO 816-483-5000

Springfield, MO 417-863-1000

Des Moines, IA 515-263-0055

Sioux City, IA 712-252-2753 Waterloo, IA 319-235-7085 Brunswick, OH 330-220-4999 Cambridge, OH 740-439-2747 Canton, OH 330-477-9304 Cincinnati, OH 513-772-3232 Columbus, OH 614-876-1141 Jackson, OH 740-688-4100 Lima, OH 419-221-3666 Painesville, OH 440-639-0700

Poland (Youngstown), OH 330-629-6299 Rossford, OH 567-352-7001

Vandalia (Dayton), OH 937-898-4198

www.aisequip.com

Bridgeport, MI 989-777-0090

Grand Rapids, MI 616-538-2400 Lenox, MI 586-727-7502

New Hudson, MI 248-437-8121 Williamsburg, MI 231-267-5060

www.brookstractor.com

Madison (Sun Prairie), WI 608-837-5141

Milwaukee, WI 414-462-9790

Green Bay (De Pere), WI 920-336-5711

La Crosse (West Salem), WI 608-786-2644

Stevens Point (Plover), WI 715-254-2777

Racine (Mt. Pleasant), WI 262-898-6700 Sparta,WI 608-351-2101

www.lec1.com

Beaver, WV 304-255-1525

Cowen, WV 304-226-3299

Cross Lanes, WV 304-204-1818

Pleasant Valley, WV

304-534-5454

Norton, WV 304-636-6421

Marietta, OH

740-373-5255

Ashland, KY

606-327-1709

Pikeville, KY

606-432-0321

www.westsidetractorsales.com

Lisle, IL

630-355-7150

Rockdale, IL

815-730-9011

Rockford, IL 815-961-3160

South Holland, IL 708-331-6362

Wauconda, IL 847-526-7700

Bloomington, IN 812-333-9677

Fort Wayne, IN 260-482-8576

Indianapolis, IN 317-544-3411

Lafayette, IN 765-447-6933

South Bend, IN 574-232-1461

Terre Haute, IN 812-645-7160

Bemidji, MN 218-759-1996

Duluth, MN 218-722-7456

Grand Rapids, MN 218-326-9427

Ashland, WI 715-682-5522

Chippewa Falls, WI

715-834-2924

Merrill, WI 715-536-0633

Escanaba, MI 906-789-9054

Marquette, MI 906-789-7689

mccoycf.com

Fenton, MO 636-349-0200

Foristell, MO 636-463-2500

Mitchell, IL 618-931-1034

Mt. Vernon, IL 618-244-6800

Cape Girardeau, MO 573-334-0563

Paducah, KY 270-554-1131 Cuba, MO 573-885-0500

Owensboro, KY 270-684-2339

Evansville, IN 812-473-0484

Kingsport, TN 423-349-5001

Knoxville, TN 865-546-3207 Chattanooga, TN 423-855-0633

Nashville, TN 615-501-8600

Bowling Green, KY 270-842-3400

Louisville, KY 502-253-3721

Lexington, KY 859-788-3950

London, KY

606-862-8447

Hitachi Global Air Power Receives Award for Sustainability Leadership in Michigan

Hitachi Global Air Power US LLC has received the “Caught YOU Being Green” Award from the Michigan City Sustainability Commission in recognition of its environmental leadership.

“In Michigan City and around the world, Hitachi is committed to advancing sustainability, human wellbeing and economic performance through innovation and digital capabilities,” said Hideki Fujimoto, president and CEO of Hitachi Global Air Power. “We are proud to receive this honor from the Sustainability Commission.”

The award acknowledges Hitachi Global Air Power for recent initiatives and accomplishments including native plant project at its headquarters, woodland restoration at Friendship Botanic Gardens and decarbonization within its operations.

Native Plant Restoration

At its Michigan City headquarters, Hitachi Global Air Power is converting nearly seven acres of traditional turf grass into a native prairie ecosystem as part of a five-year restoration effort. The initiative reduces emissions and water usage by eliminating the need for mowing and irrigation, while supporting pollinators, wildlife and soil health. This project was supported by the LaPorte County Soil and Water Conservation District through a Clean Water Indiana grant.

Woodland Restoration at Friendship Botanic Gardens

Hitachi Global Air Power launched a five-year effort to restore a critical woodland ecosystem at Friendship Botanic Gardens. This project, also supported and funded in part by the LaPorte County Soil and Water Conservation District and a Clean Water Indiana grant, enhances the landscape and creates a new public experience.

Decarbonization

Hitachi Global Air Power achieved Scope 1 and Scope 2 carbon neutrality across global operations in Fiscal Year 2024 (April 1, 2024 – March 31, 2025). The company continues to prioritize value chain decarbonization through operational efficiencies and land use strategies that support people and performance.

“These initiatives reflect the strength of our team and community partners,” said Katrina Saucier, director of sustainability of Hitachi Global Air Power. “By integrating sustainability into our business practices, we can invest in our community while serving customers more efficiently and reducing waste.”

The “Caught YOU Being Green” Award was presented to representatives from Hitachi Global Air Power at the April 7, 2026, Michigan City Sustainability Commission Meeting. For more information, visit hitachiglobalairpower.com or sullair.com. 

NAM Visits Komatsu’s South Harbor Facility in Milwaukee as Part of Tour

The National Association of Manufacturers (NAM) brought its “2026 NAM State of Manufacturing Tour” to Komatsu’s South Harbor (Milwaukee) manufacturing facility highlighting “the vital role that manufacturing plays in supporting the nation’s economy.”

The manufacturing operation at this facility primarily serves the mining industry, while the adjoining office building serves as one of the manufacturer’s two North American headquarters for staff serving construction, mining and forestry interests.

It also serves as a brand experience center where visitors can explore everything from Komatsu’s mining heritage to its “Pattern Shop” brand store that features everything from baseball hats and models to vintage P&H gear (Komatsu acquired the P&H brand as part of its 2017 acquisition of Joy Global).

The visit highlighted Komatsu’s strengths as a manufacturing force in North America, and its continued investment in North American jobs and infrastructure. The equipment manufactured at South Harbor supports the production of essential minerals that power modern life, from copper used in electrical infrastructure and electric vehicles, to iron ore that forms the backbone of bridges, buildings and transportation networks.

As global demand for critical minerals increases to sup-

BRANDEIS MACHINERY & SUPPLY COMPANY

www.brandeismachinery.com

1801 Watterson Tr. Louisville, KY 40299 502/491-4000

Bowling Green, KY 270/780-3004 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Evansville, IN 812/425-4491 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

ROAD

BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com

port energy transition, digital connectivity and infrastructure development, advanced mining technology plays a foundational role in enabling progress.

“As a stop on the NAM’s State of Manufacturing Tour, this facility is a blueprint for how to highlight the strengths of manufacturing in America, while also demonstrating the real human and societal impact manufacturers have around the world,” said Jay Timmons, NAM president and CEO. “Komatsu has made strong and intentional strides in growing its manufacturing and support footprint in North America, and this facility and its people are a testament to how a traditional manufacturing town like Milwaukee carries pride in U.S. manufacturing around the globe.”

“The work that the NAM does in elevating the profile of the manufacturing industry in North America and advocating for our interests on every stop of this tour, is invaluable,” said Rod Bull, CEO of Komatsu North America. “At Komatsu, we take pride in hard work, quality craftsmanship and the role we play in building infrastructure and communities from the ground up — we’ve done it for more than 100 years, and we’ll keep pushing for another 100 with great partners like the NAM, our dealer network and the great people who put our equipment to work every day.”

For more information, visit komatsu.com. 

1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

ROAD

MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378

952/895-9595 • 800/888-9515 Rochester, MN 507/701-0199 Duluth, MN 218/727-8611 • 800/888-9535 Virginia MN 218/741-9011 • 800/752-4304

Des Moines IA 515/282-0404 • 800/555-1445

Sioux City IA 712/252-0538 • 800/633-9104 Cedar Rapids IA 319/363-9655 • 800/616-6615

East Moline, IL 309-755-7203 • 800-633-9114

CONTINENTAL EQUIPMENT CORP.

www.ceceq.com

3600 N. Grand River Ave.

Lansing, MI 48906

517/321-8000

ROLAND MACHINERY CO.

www.rolandmachinery.com

816 N. Dirksen Parkway, Springfield, IL 62702

217/789-7711

Bolingbrook, IL

630/739-7474

Carterville, IL

618/985-3399

East Peoria, IL

309/694-3764

Marengo, IL

815/923-4966

Portage, IN

219/764-8080

Escanaba, MI

906/786-6920

Bridgeton, MO

314/291-1330

Cape Girardeau, MO

573/334-5252

Columbia, MO

573/814-0083

Palmyra, MO

573/769-2056

DePere, WI

920/532-0165

DeForest, WI

608/842-4151

Eau Claire, WI

715/874-5400

Franksville, WI

262/835-2710

Schofield, WI

715/355-9898

Slinger, WI

262/644-7500

Roland Machinery Co. www.rolandmachinery.com

Bridgeton, MO (314) 291-1330

Cape Girardeau, MO (573) 334-5252

Columbia, MO (573) 814-0083

Palmyra, MO (573) 769-2056

Portage, IN (219) 764-8080

Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399

East Peoria, IL (309) 694-3764

Marengo, IL (815) 923-4966

Springfield, IL (217) 789-7711

DePere, WI (920) 532-0165

DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400

Franksville, WI (262) 835-2710

Schofield, WI (715) 355-9898

Slinger, WI (262) 644-7500

Escanaba, MI (906) 786-6920

1801 Watterson Trail

Louisville, KY 40299 (502) 491-4000

Bowling Green, KY (270) 780-3004

Corbin, KY (606) 528-3700

Lexington, KY (859) 259-3456

Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551

Indianapolis, IN (317) 872-8410

Paducah, KY (270) 444-8390 Stanville, KY (606) 478-9201

2300 Cassens Dr. Fenton, MO 63026

636-343-9970

199 Airport Rd. Cape Girardeau, MO 63702 573-334-9937

2999 Mexico Rd. O’Fallon, MO 63385 636-332-9970

www.lubyequipment.com

921 1st St. Fairmont City, IL 62201 618-397-9971

4375 Camp Butler Rd. Springfield, IL 62707 217-744-2233

3478

www.midcountrymachinery.com

Case Construction Equipment, Jon Pardi

Extend Longstanding Partnership Into ’26

Case Construction Equipment announced the continuation of its longstanding partnership with country superstar Jon Pardi.

As part of the collaboration, Pardi performed live at ConExpo 2026 on March 3, bringing his high-energy show to one of the construction industry’s largest global stages.

Together, they will continue releasing new episodic videos that offer fans and industry professionals an inside look at his personal hands-on experience with construction equipment and ongoing earthmoving projects, a shared passion that connects him with life on the job site. Grounded in shared values of hard work, craftsmanship and authenticity, the partnership between Case and Pardi has grown naturally over time, blending music, construction and real-life stories.

“Construction is such a big part of who I am and where I come from,” said Pardi. “If I’m not on stage, there’s a good chance you’ll find me on a Case machine working somewhere out on

my property. I’m excited to continue the partnership, to shine a spotlight on careers in the construction industry and showcase some truly impressive equipment.”

“We’re incredibly proud to continue our partnership with Jon Pardi,” said Terry Dolan, head of CNH Construction Brands, commercial. “As

someone who owns and operates Case equipment himself, he brings realworld experience and a genuine connection to the construction industry that makes him a true ambassador for our brand.”

For more information on music and for ticket information, visit jonpardi.com and casece.com. 

Landwehr Names Pat Herron Vice President of Cranes Amid Expansion

Landwehr Construction Inc. announced the promotion of long-time employee, Pat Herron, to vice president of cranes.

This promotion reflects the company’s continued growth and commitment to strengthening its crane operations across the upper Midwest.

Herron began his career in the construction industry in 2001 as a heavy equipment operator for a civil contractor in the Minneapolis area. Drawn by a passion for cranes, he joined Landwehr Construction and obtained his NCCCO certification. His field experience spans a wide range of complex projects, from the oil fields of North Dakota to large-scale stadium construction throughout the region. In 2014, Herron transitioned into an office leadership role and expanded his impact on Landwehr’s crane division. Over the past eight years, he has been instrumental in the growth of Landwehr’s crane group and led the integration, growth and development of the company’s Sioux Falls opera-

tions with the acquisition of Jerke Construction in the summer of 2025.

Herron has consistently prioritized safety, training and team development, serving as a proctor for NCCCO certification exams and pursuing continued

education in OSHA compliance, leadership and technology-based training.

With nearly 25 years of industry experience and 12 years with Landwehr Construction, Herron brings a unique blend of hands-on field knowledge and strategic leadership to his new role.

“I’ve always believed in taking on new challenges and continuing to learn,” said Herron. “Landwehr has given me incredible opportunities throughout my career, and I’m excited to help lead our crane division as we continue to grow while keeping safety and teamwork at the forefront.”

Nate Landwehr, president and CEO, said, “Pat’s promotion is extremely well-earned. His leadership has been instrumental in the growth of our crane operations and the success of our Sioux Falls expansion. He embodies the values of Landwehr Construction, and I’m confident he will continue to drive our crane division forward.”

For more information, visit landwehrconstruction.com. 

INDIANA MACALLISTER MACHINERY

Heavy Equipment Rental

Locations www.macallister.com Indianapolis HQ 317-545-2151 Fort Wayne 260-483-6469 Lafayette 765-449-8191 Terre Haute 812-478-3155 Washington 812-254-1712

IOWA ZIEGLER CAT

www.ZieglerCAT.com

Altoona 800-342-7002

Atlantic 877-547-3819

Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849

Postville 800-526-0889

KENTUCKY OHIO CAT

www.OhioCAT.com

Richwood 859-372-4665 859-282-4343 (Rental)

MINNESOTA ZIEGLER CAT

www.ZieglerCAT.com

Minneapolis

800-352-2812

Brainerd 877-829-9850 Buhl

800-446-9795

Columbus 866-982-5656 Crookston 800-422-5782

Duluth 800-421-3831 Fergus Falls 800-346-7649

Jackson 866-847-6401

Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068

Shakopee 800-352-2812

St. Cloud 800-522-9469

MICHIGAN MACALLISTER MACHINERY

Heavy Equipment Rental Locations www.macallister.com Niles

269-340-5370

OHIO

OHIO CAT

www.OhioCAT.com

Broadview Heights

440-526-6200

440-658-2000 (Rental)

Cadiz 740-942-4626

740-942-6100 (Rental) Canton

330-244-2444

330-966-4674 (Rental)

Cincinnati

513-771-0515

513-612-5600 (Rental) Columbus 614-878-2287

614-851-3737 (Rental)

Lima

567-242-6860 (Rental) Perrysburg 419-874-7975

419-872-7368 (Rental) Troy 937-335-7660

937-440-2900 (Rental) Upper Sandusky 419-731-2170

419-731-2060 (Rental) Washington Court House 740-636-2429

740-636-2430 (Rental) Westerville 614-948-2828 (Rental) Youngstown 330-530-9010

330-799-1800 (Rental) Zanesville 740-453-0563

740-455-8400 (Rental)

1996 Manitowoc 888, SN: 8881038, 230 ton crawler crane, Series 2 Counterweights, LSI/LMI system w wireless load links, Self-Erect option, Luffing jib & Aux drum Prepped, AC & Heated Cab,

Your Equipment

2019 New Holland C238, S/N: NKM474234, 3220 Hours, 84” Bucket, High Flow Hydraulics, Hyd. Quick Coupler $38,000 Contact Skip Henson 219-696-5680 • shenson@ronsonequipment.com 9 JM

Here' s how the BARGAIN ADS Work:

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 17 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $140 per ad, $65 additional for color.

• Your ad will run for two consecutive issues in 1 region.

List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.constructionequipmentguide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted

WANTED: CATERPILLAR TH63 TELEHANDLER WITH ENCLOSED CAB. IT CAN HAVE A BAD MOTOR I DO HAVE A TH62 WITH A BAD TRANSMISSION BUT GOOD MOTOR.

EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642 – CALL OR TEXT.

WANTED: JOHN DEERE 550K LGPLGP CRAWLER DOZER. WANT TO BUY BULLDOZER 550KLGP JOHN DEERE ENC CAB SIX WAY UNDER 600 HOURS, REAL HOURS METER AND FRAME NEAR VERMONT OR NEW YORK. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 1-450-346-8975.

WANTED (NE): DODGE RAM 1500 BOXTRUCK/VAN TRUCK. EMAIL: JOSAMUELS315@GMAIL.COM

WANTED: CASE 580SE BACKHOE LOADER.

EMAIL: WILMANSDIMI@HOTMAIL.COM

WANTED (TX): JOHN DEERE 3038E TRACTOR LOADER. EMAIL: FLYCAL01@GMAIL.COM

WANTED (TX): JOHN DEERE 3038E TRACTOR LOADER. EMAIL: FLYCAL01@GMAIL.COM

WANTED: JOHN DEERE 850K LGP CRAWLER DOZER, SIX WAY ENC CAB WITH WINCH UNDER REAL HOURS METER AND FRAME 3000 HOURS OR 850JLGP SAME WAY WITH WINCH UNDER $95000 CDN YEAR 2009 – 2018. EMAIL: JEANMAURICCEBOUTIN@ VIDEOTRON.CA; PHONE: 450-3468975

WANTED (AR): MECALAC 10 MCR EXCAVATOR. EMAIL: FAWCETT.HOTSHOT@ GMAIL.COM: PHONE: 870-321-9572

WANTED: ALL MODELS JCB SKID STEER LOADERS.

EMAIL: JKBAKER.KOTZ@GMAIL.COM; PHONE: 907-412-0910

WANTED: LARGE PORTABLE OR STATIONARY GENERATORS IN ANY CONDITION. ALL MODELS: CAT, CUMMINS, DETROIT, MTU, PERKINS, VOLVO (DIESEL OR NATURAL GAS). CAN REMOVE IF NEEDED.

EMAIL: MICHSURPLUS@GMAIL.COM; PHONE: 201-587-6300

WANTED: VOLVO L70G WHEEL LOADERS. GOOD VOLVO L70G WHEEL LOADER, L70F, L70E. EMAIL: FRANK.HORAN@ HOFFMANEQUIP.COM; PHONE: 732-674-2095

WANTED: CATERPILLAR 988K STRAIGHT EDGE GP FINISH PRODUCT BUCKET. EMAIL: DUBOISLIVESTOCK@GMAIL.COM; PHONE: (207)-282-4445

WANTED: JOHN DEERE 850J LGP CRAWLER DOZERS. WANT TO BUY BULLDOZER 850JLGP SIX WAY ENC CAB WITH WINCH 2005 AT 2012 REAL HOURS UNDER 900. THANKS, YOU HAVE MY EMAIL FOR PICTURE. EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA

WANTED: PART FOR CATERPILLAR CRAWLER DOZER - 943 CAT SPRING FOR TRACK ADJUSTER PART# 7P1675, SERIAL # 19Z00380. PETE 631-774-1905

EMAIL: LIEARTH3@AOL.COM; PHONE: PETE @ 631-774-1905.

WANTED (WORLDWIDE): LIEBHERR WHEEL LOADER. EMAIL: MABAT_560@YAHOO.CO.UK

WANTED (WA): CATERPILLAR BACKHOE LOADERS+. LOOKING TO BUY USED EQUIPMENT IN THE FOLLOWING CATEGORIES: KOMATSU LOADERS WA200, WA270 WITH QUICK COUPLERS, LOW HOURS, GOOD PRICE; KOMATSU EXCAVATORS 138-8+ AND CAT 320 CL/DL/EL (ANY HOURS, ANY CONDITION; CAT GRADERS 140G/140H (1990 OR NEWER); CAT BACKHOES C/D/E/F SERIES; CASE BACKHOES - JD 310G – SG; OTHER CAT LOADERS, GRADERS, AND EXCAVATORS. PLEASE PROVIDE YEAR, HOURS, CONDITION, LOCATION, AND PRICE. EMAIL: JAN@GOLDENHORSEMACHINERY.COM; PHONE: 425-217-6188.

WANTED (US): KOMATSU D475A-5E0 CRAWLER DOZER. WANT TO BUY KOMATSU BULLDOZER 475A-5 OR 475A-8 WITH BIG BLADE TO PUSH WOOD. UNDER 6000 HOURS, REAL HOURS METER AND FRAME. EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA PHONE: 450-346-8975

WANTED (US): BOMAG PADFOOT COMPACTORS, ALL MODELS. LOOKING TO BUY FOR AN EROPS 84'' PADFOOT COMPACTOR (ANY MAJOR BRAND). EMAIL: EQUIPMENTDESTINY@GMAIL.COM

WANTED (WORLDWIDE): WESTERN RETEK CRUSHERS, ALL MODELS; LOOKING FOR ANY SPARE PARTS FOR A 2006 WESTERN RETEK IMPACT CRUSHER 1310I. EMAIL: WARRUMCONSTRUCTION@ICLOUD.COM PHONE: 317-71-07390

WANTED (CA); BUSH HOG PLOWS, ALL MODELS. NEED PLOWS- PREFER BRUSH HOG. WILL PAY TOP DOLLAR WHOLE OR PARTS. EMAIL: TOMTOMGOFORIT@YAHOO.COM

WANTED (WA): CATERPILLAR WHEEL LOADERS, MODELS FROM 908 TO 980. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188

WANTED (WA): CATERPILLAR BACKHOE LOADERS, ALL MODELS. EMAIL: JOHNLEWISDAN1@GMAIL.COM PHONE: (425) 217-6188.

WANTED (TX): HITACHI EX270-1 EXCAVATORS. LOOKING TO PURCHASE THE FOLLOWING EQUIPMENT (BOTH RUNNING & NON-RUNNING): WHEEL LOADERS (CATERPILLAR): 950B|950E|966E|966F; GROVE CRANES: RT880E|RT8890E; EXCAVATORS (HITACHI): EX200LC|EX270LC|EX300LC|EX/ZX330L C|EX370LC|EX400LC|EX450LC-5; WHEELED EXCAVATORS (JOHN DEERE): 495D|595D; MOTOR GRADERS (CATERPILLAR): 12G|130G|140G|140H; BACKHOES: CATERPILLAR|CASE; PAVERS (VOGELE).

EMAIL: EKTRADINGLLCOMPANY@GMAIL.COM; PHONE: 346-469-2517

WANTED (CA): HITACHI ZAXIS450LC EXCAVATORS. LOOKING FOR HITACHI ZX460LC, ZX470LC, ZX800LC, KOMATSU PC490LC-1. EMAIL: VIETUSAEXPORT@GMAIL.COM; PHONE: 951-777-9999

WANTED (US): INSLEY EXCAVATORS, ALL MODELS. LOOKING FOR LAGGING AND CABLE DRUMS FOR A W B INSLEY 1967. EMAIL: JCTHEDANCEMAN@GMAIL.COM; PHONE: 231-872-9117

WANTED (WORLDWIDE): CATERPILLAR 140K MOTOR GRADER. EMAIL: MBUSIINGE@YAHOO.COM; PHONE: 077-791-2153

WANTED (OH): CASE 580SM2 BACKHOE LOADERS. EMAIL:JERRY@VIOXEXCAVATING.COM; PHONE: 513-460-3315

WANTED (WORLDWIDE): VERMEER RTX 750 / RTX8550 EQUIPPED WITH A LARGE CUTTING WHEEL. EMAIL: RENATO.NASCIMENTO@ELEBBRE.COM PHONE: +55 11 994602266

WANTED (US): CATERPILLAR 140G MOTOR GRADERS, LOOKING TO PURCHASE A RANGE OF HEAVY CONSTRUCTION EQUIPMENT AND WOULD APPRECIATE RECEIVING YOUR BEST OFFERS FOR THE FOLLOWING MODELS, RUNNING OR NON-RUNNING: CAT WHEEL LOADERS: 950B 950E 966E 966F HITACHI EXCAVATORS: EX200LC EX270LC EX300LC EX330LC EX400LC EX450LC-5 JOHN DEERE WHEELED EXCAVATORS: 495D 595D

ABC Equipment Rental & Sales www.abcequipment.com

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

38525 Chester Rd. Avon, OH 44011 440/934-7368

Alta Equipment Co. www.altaequipment.com

18405 115th Avenue Orland Park, IL 60467 844/GO2-ALTA

Central Power Systems & Services www.kubotacentral.com

1285 Acraway Street Garden City, KS 67846 620/765-3118

Yes Equipment & Services www.yesequipment.com

7001 Manufactures Drive Madison, WI 53704 888/310-3902

11715 W Silver Spring Road Milwaukee, WI 53225 888/310-3902

Lano Equipment www.lanoequip.com

6140 Highway 10 NW Anoka, MN 55303 763/323-1720

23580 Highway 55 Loretto, MN 55357 763/479-8200

3021 West 133rd Street Shakopee, MN 55379 952/445-6310

McCullough Kubota www.mckubota.com

7225 Grand Ave. Gurnee, IL 60031 224/699-2200

1966 N. State Rt. 1 Watseka, IL 60970 815/432-3965

4620 W. US-6 Morris, IL 60450 815/942-6620

21730 LaGrange Rd Frankfort, IL 60423 815/658-2682

ALEX LYON & SON AUCTIONEERS

www.lyonauction.com

315-633-2944

• Timed Online

April 11 - 25, 2026

For: Very Late Model Construction, Utility, Earth Moving Equipment & More (CT)

• Timed Online (CAN)

April 25 - 29, 2026

For: Liquidation Major Commercial Landscape & Snow Contractor

• Honesdale, PA Fri., May 1, 2026

For: Estate Auction: Construction & Ag Equipment, Trucks, Trailers & more

• Timed Online (NY))

May 3 - 17, 2026

For: Late Model Construction Equipment, Truck, Trailers & more

• Greenville, TX

Wed., May 6, 2026

For: Rental Fleet Construction & Utility Equipment Auction

RITCHIE BROS. AUCTIONEERS

www.rbauction.com

402-421-3631

• Concrete Technologies

Realignment Auction

April 28, 2026

• Rocky Mtn. Regional Auction: April 29, 2026

• Northeast Regional Auction: May 5, 2026

• Midwest Regional Auction: May 12, 2026

• Texas Regional Auction: May 13, 2026

ABSOLUTE AUCTION & REALTY, INC.

www.AARauctions.com

800-243-0061

• Online

Ends April 26, 2026

For: Spring Equipment Auction #3

• Online Ends April 27, 2026

For: Pawling, NY Tools & Supply Liquidation Auction

• Online

Ends April 27, 2026

For: Village of Woodridge Surplus Vehicle Auction

• Online

Ends April 28, 2026

For: Town of Eastchester Surplus Vehicle Auction

ALLSURPLUS – A Liquidity Services

Marketplace www.allsurplus.com

214-427-1862

• Online

Ends April 30, 2026

For: Surplus Pickup Trucks, Truck Tractors, Dump Trucks & More

• Online

Ends April 30, 2026

For: Construction, Mining & Farming Auction

AUCTIONS INTERNATIONAL

www.auctionsinternational.com

800-536-1401

• Online April 13 - 28, 2026

For: Online Auctions Closing Daily!

Auctioneers websites for details

Coming Auctions

To view our complete list of upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

BAR NONE AUCTION

www.barnoneauction.com

866-372-1700

• Online Fri., May 1, 2026

For: Fontana, CA

Monthly Public Auction

• Online Sat., May 9, 2026

For: Sacramento, CA

Monthly Public Auction

BIDADOO AUCTIONS

www.bidadoo.com 1-877-BIDADOO

• Online April 28, 2026

• Online May 5, 2026

BIG IRON AUCTIONS www.bigiron.com 800-937-3558

• Online April 29, 2026

• Online May 6, 2026

CIA INDUSTRIAL www.cia-auction.com 513-241-9701

• Online Tues., May 5, 2026

For: Mako Forestry Corp. Live Webcast Auction

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• Union Grove, WI Wed., April 29, 2026

For: Annual Spring Stateline Equipment Auction

• Timed Online Wed., May 6, 2026 For: Annual Spring Online Equipment & Vehicle Auction

DOME AUCTIONS dome-auctions.com

+31(0)20 808 2880

• Online (SWE) Ends May 7, 2026

For: Modern Fleet Earthmoving Machinery, Construction & Contractor Equipment

DUNN DEAL AUCTION CO.

www.dunndealauctions.net

614-946-6853

• Newark, OH Sat., April 25, 2026

For: Carl Hains Retirement Newark Materials Absolute Auction

FREIJE & FREIJE AUCTIONEERS

www.freijeauctioneers.com

317-539-2895

• Indianapolis, IN May 1 - 2, 2026

For: The Big Boy Toy Auction

• Upton, KY

Sat., May 16, 2026

For: Inaugural Central Kentucky Consignment Auction

GERLACH COMPANIES

www.gerlachauctions.com

262-367-4950

• Waukesha, WI

Mon., April 27, 2026

For: Hydraulic Crane, Cargo Van, Pickup Truck & more

HANSEN AUCTION GROUP

www.hansenauctiongroup.com

920-383-1012

• Mosinee, WI April 30 – May 1, 2026

For: Spring Nitke Contractor Auction

• Online (WI) May 4 - 5, 2026

For: Spring Nitke Contractor Auction

• Downing, WI

Tues., May 5, 2026

For: North Country Equipment Rental Company Liquidation

HENDERSON AUCTIONS

www.hendersonauctions.com

225-686-2252

• Online Wed., April 29, 2026

For: Ellsworth Steam & Maritime Collection – Day 1

• Online Thurs., April 30, 2026

For: Ellsworth Steam & Maritime Collection – Day 2

HUNYADY AUCTION COMPANY

www.hunyady.com

800-233-6898

• Virtual Live Wed., May 13, 2026

For: Gernatt Asphalt Products, Inc. Absolute Surplus Liquidation Auction

I.R.A.Y. AUCTION

www.iraymn.com

320-968-7230

• Online Wed., May 13, 2026

For: New Equipment, Attachments and More

J. STOUT AUCTIONS

www.jstoutauction.com

888-897-8864

• Live Online Wed., April 29, 2026

For: Forestry & Heavy Equipment Auction

• Timed Online

Thurs., April 30, 2026

For: April Timed Online Only Auction

JAMES G. MURPHY INC. AUCTIONEERS

www.murphyauction.com 425-486-1246

• Online May 6 - 13, 2026

For: Don Olson Construction Inc –Lee’s Sanitation Heavy Equipment & Rolling Stock Public Online Auction

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

• Pompano Beach, FL Tues., April 28, 2026

For: Precision Crane & Rigging, Inc.

Absolute Auction

• Lima, OH Thurs., April 30, 2026

For: Northwest Ohio Ag & Construction Equipment Auction

• Brooklyn, MS Thurs., May 7, 2026

For: South Mississippi Auto Auction

• Atkinson, NH Sat., May 9, 2026

For: Northeast US Live & Online Consignment Auction

• Kissimmee, FL Tues., May 12, 2026

For: Live Construction Auction

JENSEN AUCTIONS www.jensenauctionsmn.com 507-456-1210

• Faribault, MN Sat., April 25, 2026

For: Estate Sale: Excavating Equipment, Skid Loader Attachments & Tools

MIDEAST EQUIPMENT AUCTIONS

www.mideastequip.com 860-370-9993

• East Vernal, UT Tues., May 5, 2026

For: Annual Truck & Equipment Auction

MIEDEMA ASSET MANAGEMENT GROUP www.1800lastbid.com 616-538-0367

• Online at Repocast.com Tues., May 5, 2026

For: Construction & Heavy Equipment Auction

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Online Tues., April 28, 2026

For: Government Auction

• Online

Wed., April 29, 2026

For: Ag Equipment Auction

• Online

Thurs., April 30, 2026

For: Truck & Trailer Auction

• Online Wed., May 6, 2026

For: Vehicles & Equipment Auction

• Online Thurs., May 7, 2026

For: Construction Equipment Auction

QUARRICK EQUIPMENT & AUCTIONS INC.

www.quarrickauction.com 724-439-1621

• Onsite & Online

Thurs., May 7, 2026

For: Two Trucks

ROLLER AUCTIONS

www.rollerauction.com 866-515-1668

• Denver, CO

Wed., May 6, 2026

For: Construction & Contracting Equipment Auction

RTi AUCTIONS www.rtiauctions.com 585-243-1563

• Timed Online April 21 - 28, 2026

For: April NetAuction Edition 2

SALES AUCTION COMPANY, LLC www.salesauctioncompany.com 860-627-7506

• Windsor Locks, CT May 1 - 2, 2026

For: 17th Annual Spring 2 Day Auction

SHETRON AUCTION & EQUIPMENT LLC

www.shetronequipment.com 717-532-8828

• Shippensburg, PA Wed., April 29, 2026

For: Construction & Farm Equipment Auction

YODER & FREY

HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com 419-865-3990

• Houston, TX May 7 - 8, 2026

For: Heavy Equipment Auction

• Evans City, PA Thurs., May 14, 2026

For: Seneca Landfill Inc. Surplus Sale

Competition Highlights Student Talent, Connection With Industry Professionals

Mason Meadows (L) and Charles Webb of Jessamine Career and Technology Center in Nicholasville, Ky., worked through handson chassis and suspension diagnostics and evaluation as part of the competition.

SKILLS from page 8

In addition to testing their skills, the competition gave students the opportunity to connect with industry professionals and gain exposure to potential career paths. With demand for skilled diesel technicians continuing to grow, these experiences are more important than ever.

As the next generation of technicians step into the workforce, competitions like

ent and dedication of students entering the diesel and heavy equipment industry.

For more information, visit skillsusa.org and brandeismachinery.com.

(All photographs in this article are Copyright 2026 Construction Equipment Guide. All

Kraft Hosts Walkerton Farm, Equipment Consignment Sale

Kraft Auction Service hosted the Walkerton Farm and Equipment consignment auction April 6–9, 2026, at 9224 S. 875 E. in Walkerton, Ind., offering live onsite bidding with online bidding available throughout the four-day event.

The auction featured more than 800 lots of construction equipment. Items up for bid included excavators, skid steers, wheel loaders, telehandlers, forklifts, trailers, lawn tractors, UTVs, trucks and new attachments.

Online bidding was available through KraftAuctions.com, EquipmentFacts, HiBid and Proxibid.

For more information, visit kraftauctions.com.  CEG

(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)

A nice selection of mini-excavators was lined up and ready for work.

was

This variety of forklifts were a popular item among bidders at the Kraft Auction Service

Wausau Welcomes All to Annual Spring Sale in Merrill, Wis.

On April 10, Wausau Auctioneers hosted its annual Spring Equipment Auction at its facility — 4510 County Road L — in Merrill, Wis. The sale was conducted onsite and online.

A partial list of items up for bid included excavators of all varieties and sizes, wheel loaders, dozers, artic trucks, paving equipment, lifts, forestry equipment, skid steers, attachments and more. Equipment manufactures included Case, John Deere, Bobcat, New Holland, Caterpillar, Komatsu, Volvo, Takeuchi, Doosan, BOMAG and more.

Wausau Auctioneers was founded in 1979 by Carl Theorin and Bob Lazewski. The company specializes in auctions for construction, farm and logging equipment, transportation and more, primarily conducting sales in Wisconsin, Minnesota, Illinois, Michigan, Iowa, Indiana and Ohio.

For more information, visit wausauauctioneers.com.

 CEG

(All photographs in this article are Copyright 2026 Construction Equipment Guide. All Rights Reserved.)

Looking over a Cat 926 wheel loader are Dylan Severson (L) of DS DirtWorks and Nick Hall of

Contractors Should First Focus On OSHA Qualifications

Where to Commit Your Safety Training Dollars

CraneTech suggests contractors focus first on programs where OSHA already expects training and qualifications.

Also focus on programs where incidents are common and costly, “even where a national certification isn’t required,” said the firm.

When forklifts are a regular part of daily work, every operator should be trained and evaluated on forklift operations. Records should be maintained on the training and evaluation of every operator who participates.

Perform a pre-use inspection daily — each shift for 24/7 operations — per OSHA regulations.

This all pays, said CraneTech, in fewer struck-bys, tip-overs and property damage.

“Forklift incidents remain a significant source of severe cases,” it said.

Regarding aerial lifts (MEWPs) and fall protection, only trained and authorized employees may operate, per OSHA.

A designated person should test controls each day prior to use and a full-body harness should be correctly worn and secured to an

Business Calendar

ASSOCIATED GENERAL CONTRACTORS (AGC)

AGC Events Calendar:

All AGC Web-Eds are scheduled in Eastern Standard Time (EST). Conferences are scheduled using the local time zone where the event takes place.

• AGC EDGE Planning and Scheduling (STP Unit 3)

Dates: Monday, May 4, 2026 (4:00 PM) –Tuesday, May 12, 2026 (8:30 PM) Online, Virtual Training/Professional Development

• AGC EDGE Safety Management Training Program

Dates: Wednesday, May 6, 2026 (9:00 AM) –Thursday, May 21, 2026 (5:00 PM)

Online, Virtual

• AGC EDGE Productivity and Managing Project Costs (STP Unit 5)

Dates: Thursday, May 14, 2026 (10:00 AM) –Thursday, May 28, 2026 (3:30 PM)

Online, Virtual

Training/Professional Development

• AGC EDGE Contract Documents (STP Unit 4)

Dates: Monday, June 1, 2026 (4:00 PM) –Tuesday, June 9, 2026 (8:30 PM)

Online Virtual

Training/Professional Development

• AGC EDGE Project Manager Development Program

Dates: Tuesday, June 2, 2026 (11:00 AM) –Tuesday, June 30, 2026 (5:00 PM)

Online, Virtual

anchor point.

This practice pays in the prevention of serious injuries and costly errors, said CraneTech,

“Many incidents occur during setup, repositioning or when entering and exiting the platform,” according to the company’s blog post. “Training on stability, fall protection and site hazards helps prevent serious injuries and costly errors.”

For crane operations, a pre-use inspection of rigging gear should be performed each shift.

In the inspection, OSHA dictates that defective equipment should be removed from service, defects tagged out and corrective actions documented.

CraneTech believes this practice pays in recognizing worn slings, bent hooks or damaged hardware before a lift, which prevents incidents and protects gear.

OSHA dictates employers ensure signal persons are properly qualified to give hand or voice signals and recognize load hazards before directing crane operations.

“Clear, consistent signals reduce crane miscommunication during lifts and help prevent struck-by and caught-between incidents.” That’s the pay-off, said CraneTech.

OSHA-recommended practices say man-

Training/Professional Development

• AGC Safety & Health Quarterly Town Hall

Date: Wednesday, June 3, 2026 (2:00 PM – 3:00 PM)

Virtual Safety and Health

• Federal Contractors Conference

Start Date: Monday, June 8, 2026 (8:00 AM)

End Date: Wed, June 10, 2026 (7:00 PM) Washington, District of Columbia

• AGC EDGE Construction Supervision Fundamentals

Start Date: Tuesday, June 9, 2026 (4:00 PM)

End Date: Thursday, June 18, 2026 (8:00 PM)

Online, Virtual

Training/Professional Development

• AGC EDGE Managing Risks (STP Unit 6) Thursdays

Start Date: Thursday, June 11, 2026 (10:00 AM)

End Date: Thursday, June 25, 2026 (3:30 PM) Online, Virtual

Training/Professional Development

• AGC Executive Leadership Council Annual Conference

Start Date: Saturday, June 27, 2026 (7:00 AM)

End Date: Wednesday, July 1, 2026 (7:00 PM) Ivans, Utah

FABICK CAT

2026 FORISTELL OPEN HOUSE

Date: Thursday, MAY 7, 2026, 11AM – 2PM

Place: FABICK CAT 1043 North Service Road, Foristell, MO 63348

When you want CAT Equipment, come to FABICK CAT! You’ll find experienced sales representatives and factory-trained technicians as well as new and used equipment. We also have a large inventory of rental equipment. This year’s Open House event includes new products on display, machine deals and lunch on us! Whether you’re a customer explor-

agers and front-line leaders should review the day’s work before operations begin. They should confirm required inspections were completed, address hazards before work begins and reinforce key safety points during toolbox talks.

“Supervision turns training into daily habits and helps build a strong safety culture,” said CraneTech.

When supervisors are involved, crews make fewer mistakes, the blog post said, and work continues without costly interruptions.

The organization recommends small contractors start with a 90-day plan to make affordable safety improvements:

• Pick two high-exposure areas to start. For many, is said, that’s forklift and inspection programs.

• Train operators and your “designated” personnel. Put daily checklists in place.

• Train your leaders/supervisors on basics: pre-task talks, verifying inspections, fixing hazards and documenting corrective actions.

For 60 to 90 days, track a few leading safety indicators such as near-misses, defects identified and corrected, training completions and inspection compliance.

Review results monthly and show the financial impact. Contractors can do this by re-running OSHA $afety Pays with profit

ing the latest equipment and innovations, looking to chat with our team of experts or interested in learning more about Fabick Cat’s offerings over lunch, this event has something for everyone! Register Today: https://info.FabickCat.com/2026-Foristell-OpenHouse)

Association for Iron & Steel Technology (AIST) AISTech 2026

Dates: May 4 – 6, 2026

Place: David L. Lawrence Convention Center 1000 Fort Duquesne Boulevard Pittsburgh, PA 15222

Phone: 412/565-6000

See What’s Cooking in the Steel City! Make your plans now to join us at AISTech 2026, the industry premier event bringing together the people, technology and ideas that power the steel company. Returning to Pittsburgh, for the first time in four (4) years – a host location that always yields promise for the steel industry’s largest annual conference and exposition. The Iron & Steel Exposition promises a dynamic exposition floor packed with 600+ steel companies on two floors. Add 500” technical presentations covering the steelmaking process from start to finish, and you have an award-winning recipe for the industry can’t miss events in 2026. See you in Pittsburgh in May! Why Attend? AISTech 2026 is a can’t miss event of the year!

Meet with more than 8,000 of your closest steel industry friends from around the world. Evaluate new Business Opportunities. 500+ Exhibitors. All the industry’s newest technologies in one location. Network with Decision-Makers. 70% of attendees are management level or higher. Invest in your Career and Your Future. Challenge yourself in new environments gain fresh perspectives and open doors to your success. Get up to speed on the latest industry

margin.

They can then share the “sales-to-breakeven” number, along with incident trends, to owners and managers.

A strong safety program, believes CraneTech, starts with documented trained and evaluated operators and pre-use checks before the first lift or drive.

Cranes and hoists receive frequent and periodic inspections on schedule, with a designated person assigned and records maintained.

Supervisors address hazards promptly and review key safety indicators each month.

Safety training organizations say first and foremost a contractor must consider how much he or she is actually losing by not investing in safety training.

“The bottom line: Safety training protects both people and profit,” said CraneTech.

“Investing in safety leads to lower injury and workers’ compensation costs, fewer delays, stronger retention and better performance.”

The data is clear, said the firm, and the path is practical for operations of any size.

“Start with your highest-exposure areas, strengthen supervisor oversight, measure what matters, and share results in both dollars and incident rates.”  CEG

and technology trends. 100+ Technical Sessions covering every aspect of the Steelmaking Process. Build and Strengthen Relationships. More than 8,000 Steel Professionals are expected to attend. For more information:

Association for Iron & Steel Technology (AIST) Phone: 724/814-3000 Fax: 724/814-3001

ASSOCIATED GENERAL CONTRACTORS of MINNESOTA (AGC of MN)

CONSTRUCTION DAY AT THE CAPITOL

Date: Thursday, May 7, 2026

Time: 8:30 AM – 12:00 NOON Place: AGC Office 525 Park Street, Suite 110 St. Paul, MN 55103

AGC Construction Day at the Capitol 2026. AGC Members are encouraged to join us for AGC Construction Day at the Capitol this year! Hear from AGC Staff about the latest events at the Capitol, take a tour, and meet with legislators and agency leaders. “Current AGC Building Leaders and Leadership Blueprint Participants do not need to register for Day at the Capitol.” Please refer to your materials for your full day schedule.

AGENDA: 8:30 AM Welcome. 9:00 AM Hear from AGC Director of Highway/Heavy and Government Affairs and the AGC Lobbying Team about the latest happenings at the Capitol with less than three (3) weeks remaining in the 2026 legislative session. 11:00 AM MN State Capitol Tour. 12:00 PM Grab lunch on your own at the Capitol or proceed with your day!

For more information: AGC of MN

525 Park Street, Suite 110 St. Paul, MN 55103-2186

Phone: 651/632-8929

Email: info@agcmn.org

ADVERTISER INDEX