Midwest 24 November 19, 2016 by Construction Equipment Guide

Published Nationally

$3.00

Midwest Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.” www.constructionequipmentguide.com 4

November 19, 2016 • Vol. XX • No. 24 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

PCL Civil Constructors photo

Ind.’s Rieth-Riley Celebrates Its 100th Anniversary By Irwin Rapoport

Erb Equipment Celebrates Expanded Facility…10

CEG CORRESPONDENT

Equipment on site has included crane-mounted drill attachments and reverse circulatory drills for installation of the drilled shafts. Case Unveils G Series Wheel Loaders…16

Four-Lane Bridge to Serve ‘Land Between The Lakes’ By Cindy Riley CEG CORRESPONDENT

MTA Works on East Side Access Project…20

Table of Contents ................4 Snow & Ice Section ......41-45 Trailers Section ............63-82 Paving Section............93-104

Crews in Kentucky are working to complete a modern, four-lane bridge to carry U.S. 68/KY 80 over Lake Barkley, and serve as the eastern entrance to Land Between The Lakes National Recreation Area. The $128 million project is the second of two bridge replacements. “We are currently working six headings

on the project,” said Eric Chavez, project manager, PCL Civil Constructors Inc. “Roadway work and paving operations are finishing up for the season on the west approach. Foundation installation, 72 and 84 inch drilled shafts are being installed on the west approach. Approach and main span substructure is working three headings.” In the Lake Barkley area, the project will widen approximately 1.5 mi. (2.4 see BRIDGE page 62

Founded prior to the United States involvement in WWI, Rieth-Riley Construction Co. in Goshen, Ind., is celebrating its 100th anniversary and is looking forward to another century of success in Indiana, Michigan and neighboring states. The company is still headquartered in Goshen, Ind., where it was founded in 1916. The company is now 100 percent employee-owned, Albert A. Rieth, the chief surveyor of Elkhart County, started the company, which received the county’s first contract to build a gravel road in 1916 — County Road 32. Rieth earned a degree in civil engineering from Purdue University, and recognized the need for modern see ANNIVERSARY page 32

Rieth-Riley has a large fleet of vehicles and equipment.

Souris River Flood Protection Plan May Cost $1B MINOT, N.D. (AP) The Army

that the draft recommends a plan

transportation closure structures,

(775 cu m) per second, which is the

Auction Section ......109-119 Corps of Engineers has released a the Souris River Joint Board has the reconstruction or modification estimated flow during a 2011 flood Business Calendar ..........116 Advertisers Index ............118

draft environmental impact statement for the proposed Souris River flood protection project in Ward County and is accepting public comments through Dec. 22. The Minot Daily News reported

proposed, which includes nearly 19 mi. (30.5 km) of new levees, nearly 3 mi. (4.8 km) of new floodwalls, two channel realignments totaling nearly 2 mi. (3.2 km), two high-flow bypass diversions, 21

of six bridges and 121 acres of overbank excavation. The draft said the estimated cost is $589 million to $1 billion. The new features would accommodate flows up to 27,400 cu. ft.

in Minot. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 2 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2007 CAT D6N $95,000 S/N DJY00495 - 7,888 hrs

2008 CAT D5K $65,000 S/N WWW00540 - 4330 hrs

2007 CAT D6T $76,500 S/N KJL00468 - 7968 hrs

1987 CAT D8L $53,500 S/N 53Y04694 - 9129 hrs

2006 CAT 980H $200,000 S/N JMS01306 - 10,459 hrs

2015 CAT 972M $250,000 S/N A8P00532 - 6459 hrs

2011 CAT 930H $79,500 S/N DHC03051 - 9,873 hrs

2012 CAT 980K $320,000 S/N W7K00999 - 6,137 hrs

2012 CAT 262C $40,000 S/N TMW01019 - 1,309 hrs

2012 CAT 262C $40,000 S/N TMW00159 - 1479 hrs

2014 CAT 262D $35,000 S/N DTB01191 - 1,251 hrs

2008 CAT 272C $26,500 S/N RED00965 - 4847 hrs

2015 CAT 289D $68,000 S/N TAW02550 - 406 hrs

2012 CAT 259B3 $41,000 S/N YYZ04184 - 1229 hrs

2013 CAT 279C $42,000 S/N KWB01275 - 1784 hrs

2014 CAT 289D $58,500 S/N TAW02067 - 786 hrs

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 3

2016 Laymor Sweepmaster .... $23,500

2012 Deere 850K XL LT T w/Winch.. $179,500

2006 Cat D6RIII LGP P w/Winch .... $118,500

2015 Screen Machine ne 107T Scalperr...$128,500 ...$128,500

Canopy, Kubota D1105 Tier 4F 24.8HP, Tier 4 diesel, 8’ broom, 70 gallon sprinkler system, 205/75R14 tires, towable, 3,100 lbs., 6 hrs. .................................... .................... #LA AY001 Y001

AC, 205HP Tier 4 diesel, 12’ 3” 6 way blade, hydrostatic trans., 23 1/2” pads, Allied H6H 60,000 lb. winch, rear screen, 49,000 lbs., 1,221 hrs. ....................... #11043

A/C, Cat C9 200HP P diesel, 36” pads, diffff st steer teer, System 1 undercarraige, 3rd valve, Paccar PA56 rear winch, sweeps, rear screens, 41,000 lbs., 5,384 hrs. .... #10224

5” tapered grizzly spacing, 2-5’x7’ screens, adjustable screen angling, 10’,10” load height,, remote, 3-5 yard loader capacity, 45,000 lbs, 318 hrs. ........... #SM007

sales@iltruck.com • rental@iltruck.com • 815-941-1900 Illinois T Truck ruck & Equipment • 320 Briscoe Drive, Morris Illinois 60450

www.iltruck.com www .iltruck.com

Page 4 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION

IN THIS ISSUE

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

10 ERB EQUIPMENT CELEBRATES NEWLY EXPANDED LOCATION Erb Equipment Company held an open house celebration at its newly expanded branch in Paducah, Ky., on Nov. 4.

16 CASE UNVEILS G SERIES WHEEL LOADERS AT TOMAHAWK FACILITY

76 THUNDER CREEK REDESIGNS SERVICE, LUBE 112 SOUTH AFRICA-BASED CLEAR ASSET JOINS

Case Construction Equipment unveiled its new G series wheel loader to the press at its 500-plus acre Case Tomahawk Experience Center located in Tomahawk, Wis.

20 EAST SIDE ACCESS PROJECT CREW PRAISES MACHINERY MOBILITY The Metropolitan Transportation Authority (MTA) in New York is working on one of the largest public works projects currently under way in the United States.

MISSOURI’S CONSTRUCTION INDUSTRY The Associated General Contractors (AGC) of Missouri announced the winners of its 2016 construction industry awards on Nov. 10 at its gala event at the River City Casino & Hotel.

54 SOUTHEASTERN EQUIPMENT PROMOTES WATTON, GOURLEY TO VEEP POSITIONS Southeastern Equipment Co. Inc. is pleased to announce that Heath Watton and Mickey Gourley have both been promoted to the position of vice president.

58 FASB NEW LEASE ACCOUNTING RULES The new rules for lease accounting approved by the Financial Accounting Standards Board (FASB) are scheduled to take effect for financial periods starting after Dec. 15, 2018, for public companies and after Dec. 15, 2019, for private companies, with a modified application for any other financial period presented.

Proxibid, an online marketplace for connecting buyers and sellers of highly valued items, has been selected by Clear Asset, a South Africa-based independent online auction platform for the disposal of moveable assets, to provide online selling solutions for mining, construction, agriculture and maritime equipment.

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com Editorial e-mail editorial@cegltd.com Advertising e-mail production@cegltd.com

Mobile

Facebook

Twitter

80 TALBERT’S 55CC PROVIDES LOW DECK

82 XL SPECIALIZED TRAILERS OPENS NEW

Ritchie Bros. announced that Beverley Briscoe, chair of Ritchie Bros. board of directors, has been named to the 2016 National Association of Corporate Directors’ (NACD) Directorship 100.

SERVICE CENTER

82 FELLING LOWERS THE ANGLE WITH 8-FOOT 112 RITCHIE BROS. COMPLETES NEW $1B

AIR RAMPS

CREDIT FACILITIES The facilities will remain unsecured until the closing the of the IronPlanet acquisition, after which the facilities will be secured by assets of Ritchie Bros. and certain of its subsidiaries in Canada and the United States.

116 RITCHIE BROS. PREPARING INVENTORY FOR 2017 ORLANDO AUCTION Five days, hundreds of sellers, thousands of bidders, 10,000+ items: Ritchie Bros.' annual February Orlando event is its largest U.S. auction each year, providing an unrivaled customer experience for both buyers and sellers alike.

XX HEADLINE... DEPARTMENTS 107 CLASSIFIEDS 110 COMING AUCTIONS 116 BUSINESS CALENDAR

EQUIPMENT

TRAILER SECTION 64 NEED A LIFT? THERE’S A TRAILER TO FIT YOUR NEEDS

41 BONNELL INDUSTRIES INC Commander Series Bodies 42 BUYERS PRODUCTS SaltDogg Municipal Dump Spreader 100 BOMAG Cedarapids Paver

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

WITH ‘H.O.S.S.’

HEIGHT, HIGH CAPACITY

DroneDeploy, a cloud-based drone software platform, announced the launch of the App Market, the first drone industry app store. Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

80 LANDOLL UNVEILS 900D SERIES EQUIPPED

112 NACD HONORS BRISCOE WITH 2016

88 DRONEDEPLOY LAUNCHES APP, UNLOCKS DRONE IMAGERY DATASET

TRAILER; INCLUDES NEW CHASSIS

PROXIBID FOR SALES

‘DIRECTORSHIP 100’ AWARD

28 CONSTRUCTION AWARDS GALA RECOGNIZES

YouTube

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

National Sales Manager 315/866-1423 Toll Free 800/988-1203 Fax 315/866-1379 e-mail khogeboom@cegltd.com

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Toll Free Fax e-mail

773/769-4090 800/632-0233 773/769-4280 jmckeon@cegltd.com

Toll Free Fax e-mail

440/243-9690 800/810-7640 440/243-9691 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Toll Free Fax e-mail

952/353-1770 866/413-4265 952/353-2750 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 5

Quality Used Equipment...with support to back it up

Komatsu PC138USLC-10, ’14, 2,794 hrs$115,000

Cat 325CL, ’02, 6,761 hrs ........................$50,000

DOZERS

EXCAVATORS

SKID STEERS

Komatsu D51PX-22, ’07, 5,510 hrs ..................................$114,500 Komatsu D61PX-15EO, ‘08, 4,180 hrs ..............................$105,000 Komatsu D61PX-23, ‘13, 4,090 hrs ..................................$146,000 Komatsu D61PX-23, ’14, 1,838 hrs ..................................$179,000 Komatsu D61PX-23, ’14, 2,367 hrs ..................................$179,000 Komatsu D65EX-15, ’06, 2,301 hrs....................................$144,500 Komatsu D65EX-16, ’11, 2,234 hrs....................................$165,000 Komatsu D65PX-15EO, ’06, 11,070 hrs ..............................$59,000 Komatsu D65EX-15EO, ’07, 3,934 hrs ..............................$149,500 Komatsu D65WX-15EO, ’07, 3,959 hrs ..............................$157,000 Komatsu D275AX-5, ’03, 23,015 hrs ..................................$99,500

Atlas Copco MB1200 Hydraulic Hammer, ’05, Rebuilt & Painted ...... ..............................................................................................$21,799 Case CX135SR, ‘11, 2,350 hrs ............................................$88,000 Case CX160, ‘05, 6,579 hrs ................................................$40,000 Cat 330CL, ’02, 12,032 hrs ..................................................$59,500 Cat M318, ‘96, 6,440 hrs ....................................................$39,500 Cat 325CL, ’02, 6,761 hrs ....................................................$50,000 Deere 85G, ’15, 553 hrs ......................................................$99,000 Deere 160C LC, ’06, 7,173 hrs ............................................$55,000 Deere 200C LC, ’04, 8,988 hrs ............................................$60,000 Deere 240D LC, ‘10, 6,338 hrs ............................................$80,000 Deere 350DLC, ’07, 5,837 hrs ..........................................$109,500 Deere 350DLC, ’07, 6,832 hrs ..........................................$109,500 Kobelco SK485-9, ‘12, 3844 hrs ........................................$180,000 Komatsu PC138USLC-8, ’13, 2,432 hrs ............................$115,000 Komatsu PC138USLC-10, ’14, 2,794 hrs ..........................$115,000 Komatsu PC160LC-7, ’07, 4,483 hrs....................................$79,000 Komatsu PC160LC-7, ‘04, 8,215 hrs....................................$49,000 Komatsu PC200LC-7, ‘03, 8,117 hrs....................................$65,000 Komatsu PC200LC-8, ‘12, 4,414 hrs..................................$110,000 Komatsu PC210LC-10, ’13, 1,862 hrs................................$145,000 Komatsu PC210LC-10, ’14, 1,307 hrs................................$178,000 Komatsu PC220LC-6, ‘98, 19,095 hrs..................................$37,100 Komatsu PC220LC-7, ‘04, 12,969 hrs..................................$48,000 Komatsu PC220LC-7, ‘02, 9,906 hrs....................................$80,000 Komatsu PC220LC-8, ’06, 9,204 hrs....................................$83,000 Komatsu PC228USLC-8, ’12, 3,449 hrs ............................$155,000 Komatsu PC228USLC-10, ’14, 923 hrs ..............................$186,599 Komatsu PC300LC-6, ’97, 6,802 hrs....................................$40,000 Komatsu PC300LC-7, ’02, 6,764 hrs....................................$90,000 Komatsu PC300LC-7, ’05, 9,765 hrs....................................$91,000 Komatsu PC300LC-7 w/Shear, ‘06, 7,463 hrs ..................$265,000 Komatsu PC300LC-7EO, ’06, 7,736 hrs ............................$110,000 Komatsu PC300LC-8, ‘09, 9,584 hrs..................................$119,000 Komatsu PC360LC-10, ’15, 838 hrs ..................................$250,000 Komatsu PC360LC-10, ’15, 1,018 hrs................................$250,000 Komatsu PC360LC-10, ’13, 2,510 hrs................................$179,000 Komatsu PC360LC-10, ’12, 1,148 hrs................................$264,500 Komatsu PC390LC-10, ‘15, 1,545 hrs................................$275,000 Komatsu PC400LC-7, ’06, 10,544 hrs..................................$70,000 Komatsu PC400LC-7EO, ’07, 10,949 hrs ............................$84,000 Komatsu PC400LC-8, ‘08, 7,118 hrs..................................$127,000 Komatsu PC400LC-8, ‘09, 6,677 hrs..................................$140,000 Komatsu PC490LC-10, ‘13, 2,977 hrs................................$268,999 Komatsu PC490LC-10, ‘12, 3,273 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 4,306 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 5,371 hrs................................$239,000 Komatsu PC600LC-7, ’05, 10,328 hrs................................$199,500 Komatsu PC600LC-8, ’06, 10,478 hrs................................$199,500 Komatsu PC750SE-6, 12,835 hrs ........................................$39,000 Link Belt 250 X3 LF, ‘12, 3,437 hrs....................................$120,000 Volvo EC220DL, ’13, 2,151 hrs ..........................................$134,500 Volvo EC380DL, ‘11, 4,017 hrs ..........................................$150,000

Case TV380, ‘11, 1,945 hrs..................................................$45,000 New Holland L230, ’14, 295 hrs ..........................................$49,399

FORESTRY Hydro-Ax 411 EX, ’98, 7,547 hrs..........................................$35,000 Komatsu 911.4, ‘09, 7,544 hrs....................................................Call Komatsu 911.4, ’11, 6,132 hrs....................................................Call Komatsu 911.4, ’10, 5,225 hrs....................................................Call Komatsu 911.5, ‘13, 6,160 hrs....................................................Call Komatsu 931.1, ‘14, 4,000 hrs ..........................................$425,000 Ponsse Ergo Harvester, ‘05, 13,239 hrs ....................................Call Ponsse HS10 Cobra, ’99, 20,995 hrs ..................................$64,900 Ponsse Buffalo, ’02, 22,200 hrs ........................................$119,000 Ponsse Ergo HS16, ’99, 17,676 hrs ....................................$79,900 Valmet 911.1, ‘02, 22,196 hrs ....................................................Call

MATERIAL HANDLERS Cat 365CL-MH, ‘08, 10,428 hrs ........................................$137,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..............................$219,500 Sennebogen 825M D, ’13, 17 hrs ..............................................Call

OFF HIGHWAY TRUCKS Komatsu HD465-7, ’06, 18,843..........................................$219,500

WATER TRUCKS Komatsu HM300-2 6,500 Gal, ’12, 7,764 hrs....................$255,000

MILLING Wirtgen W60, ’08, 628 hrs ................................................$144,900 Wirtgen W2000, ‘08, 7,798 hrs..........................................$199,999 Wirtgen W2100, ’04, 8,538 hrs..........................................$209,500

Deere 160C LC, ’06, 7,173 hrs ................$55,000

V I S I T

COMPACTION Bomag BC61RB, ’00, 15,862 hrs ........................................$49,900 Bomag BC1172RB, ’05, 15,531 hrs ....................................$89,900 Hamm HD120HV, ‘03, 2,690 hrs ..........................................$32,999 Hamm HD120HV, ‘04, 3,211 hrs ..........................................$30,000 Stone WP4100 Double Drum, ‘09, 1,018 hrs ......................$14,599 Volvo DD15, ‘14, 631 hrs ....................................................$23,000

PAVING IR 550P, ‘91, 2,010 hrs ..........................................................$9,000 Leeboy 8000D, ‘03, 2,390 hrs..............................................$33,000 Leeboy 8500, ‘03, 3,521 hrs ................................................$25,000 Leeboy 8500T, ’06, 5,859 hrs ..............................................$25,000 Vogele 5203-2, ’08, 4,307 hrs ............................................$99,000 Vogele 880WB, ’05, 5,862 hrs ............................................$26,699

WHEEL LOADERS Deere 544K, ’13, 1,023 hrs ..................................................$P.O.R. Deere 624K, ’13, 948 hrs ......................................................$P.O.R. Deere 624K, ’13, 905 hrs ......................................................$P.O.R. Komatsu WA200PZ-6, ‘14, 957 hrs....................................$115,000 Komatsu WA270-7, ’15, 916 hrs........................................$120,000 Komatsu WA320-7, ‘16, 116 hrs........................................$159,800 Komatsu WA320-7, ’14, 1,171 hrs ....................................$136,000 Komatsu WA380, ‘95, 7,833 hrs ..........................................$35,000 Komatsu WA380-6, ’11, 2,888 hrs ....................................$150,000 Komatsu WA380-6, ’12, 2,571 hrs ....................................$165,000 Komatsu WA380-7, ‘12, 3,025 hrs ....................................$147,500 Komatsu WA400-5L, ’05, 10,968 hrs ..................................$72,999 Komatsu WA430-6, ‘11, 4,377 hrs ....................................$167,500 Komatsu WA500-6, ‘09, 9,628 hrs ....................................$207,299 Komatsu WA500-6, ’09, 19,098 hrs ..................................$125,000 Komatsu WA500-6, ’09, 8,621 hrs ....................................$211,399 Terex TL300-2, ’08, 2,441 hrs..............................................$69,500

TRAILERS Felling FT-50-3, ‘05 ............................................................$19,000

Deere 85G, ’15, 553 hrs..........................$99,000

Financing Available for Qualified Buyers

16 Roland Branch Locations in IL, IN, MI, MO, and WI

Call AJ Perisho (217) 789-7711 • Email: aperisho@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 â€˘ November 19, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke â€˘ (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ÂŽ

View our complete Used & â€œLike Newâ€? inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2007 Case SV208, s/n DDD002010, 1600 Hours, ROPS, 66â€? Wide Smooth Drum Roller .. ............................................................$47,700

2012 Case CX160C, s/n DAC160K6NCSAF1112, 2500 Hours, Cab w/AC, 9â€™11â€? Arm, 24â€? Shoes, Single Acting Hyds, Coupler, Warranty Through 03/17 ......$113,850

2012 Case CX350C, s/n DAC350K6NCSAP1212, 2150 Hours, Cab w/AC, 10â€™8â€? Arm, 32â€? Shoes, Single Acting Hyds, Coupler, Warranty through 07/17 ..................................................$189,750

2012 Case CX210C, s/n DAC210K6NCSAH1134, 1820 Hours, Cab w/AC, 9â€™8â€? Arm, 32â€? Shoes, Double Acting Hyds, Coupler, Warranty through 03/17 ......$126,900

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

Rent Today!

McHenry* 815-385-0420 Wauconda 847-526-9444

2012 Case DV202, s/n DDDDV202NCTF2016, 1175 Hrs, ROPS, Right Side Drive Lever, 47â€? Drum ....................................................$25,800

Case SV208PD, s/n DDD002057, 1000 Hours, Rops, 66 inch Pad foot Roller, Blade....$47,700

Case 410, s/n N8M494216,1455 Hours, Rops, Manual Coupler, New engine @ 1415 Hours, 10 x16.5 Tires, 66â€? Bucket ........................$14,000

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

2006 Case 580SM, s/n N6C412119, 4600 Hours, Cab w/ Heat and AC, 4 WD, Ext-hoe, Ride Control, Two Lever,82â€? Bucket, 12â€? and 24â€? Bkt..................................................$40,500

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Indiana Schererville* 219-865-6545 *Case authorized dealer location

Used Equipment From a Name You Can Trust

2013 Takeuchi TB016 3,524# Excavator with O-ROPS, Adj. Rubber Tracks, Travel Alarm, Quick Coupler, Aux

2011 Takeuchi TB235 7,950# Excavator w/ Cab, Heat, A A/C, /C, $QJOH %ODGH 4XLFN &RXSOHU $X[ +\G 7KXPE Â´ %XFNHW

2012 Takeuchi TB180FR 18,300## Zero Tail Swing Excavator w/ Cab, Heat, A A/C, /C, /C Qu Q ick Coupler, Aux Hyd, Travel Alarm, &

+\G Â´ %XFNHW KUV ,' ÂŤ

KUV ,' ÂŤ

Â´ %XFNHW KUV ,' $ ÂŤ

2013 Mustang 2076 skid with 2,200## Cap, O-ROPS, H/F Ctrls, 2Speed, Aux Hyd, & Block Heater. KUV ,' $ÂŤ

2013 Mustang 2076 skid with w 2,500# Cap, Cab, Heat, Joystick Ctrls, 2Speed, & PowerTach.

2013 Mustang 2076 skid with 2,500## Cap, Cab, Heat, A/C, Joystick Ctrls, 2Speed, & PowerTach.

KUV ,' ÂŤ

KUV ,' $ÂŤ

2014 Bobcat S570

2014 Bobcat S590

Stk# 92113-(L) H51, C/H, Pwr Bobtach, Susp Seat, 2 Spd, 238 Hrs ........$28,500

Stk# 93027-(L) A51, C/H/A, Pwr Bobtach, Susp Seat, 2 Spd, 144 Hrs ........$31,900

Stk# 65922-(S) A91, C/H/A, Pwr Bobtach, Hi-Flow, 2 Spd, 1120 Hrs ......$26,500

2014 Bobcat S650

2015 Bobcat S770

Stk# 92041-(A) H51, C/H, Pwr Bobcat, Susp Seat, 2 Spd, 206 Hrs ........$31,900

Stk# 66518-(S) A91, C/H/A, Stk# 65810-(A) A91, C/H/A, Pwr Bobtach, Hi-Flow, 2 Pwr Bobtach, SJC, Hi-Flow, Spd, 543 Hrs ........$32,900 150 Hrs ................$44,900

Anoka (A), MN 888-448-5266 â€˘ 763-323-1720 Loretto (L), MN 888-479-4342 â€˘ 763-479-8200 2009 Gehl CTL55 track loader with 1,246# Cap, 51hp, O-5236 -R\VWLFN &WUOV VSG $X[ +\G Â´ %XFNHW

2011 Takeuchi TL250 track loader with 2,624# Cap, Cab, Heat, Aux Hyd, Hyd QuickTach.

2014 Takeuchi TL12 track loader with 2,800# Cap, Cab, Heat, A A//C, Aux Hyd, Pattern Select, Ride Control,

KUV ,' ÂŤ

KUV ,' $ÂŤ

KUV ,' ÂŤ

- - _ 'HV 0RLQHV Ä &HGDU 5DSLGV Ä :DWHUORR Ä $PHV _ ZZZ Z VWDUHTXLS FRP

Shakopee (S), MN 877-753-6100 â€˘ 952-445-6310

www.lanoeq.com

www.lanoequip.com

www.lanogardengear.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 7

PAVERS / ROAD WIDENERS BOMAG CR362L - ‘14, 780 Hrs, Track Paver, Stretch 16 Electric Screed, Topcon V System and More, #C000555, OBO ....................................................................................................$259,950 BOMAG CR452L - ‘15, 296 Hrs, Rubber Tired Paver, w/Stretch 20E, Top Con Controls, OBO, #C000764 ............................................................................................................................P.O.R. BOMAG CR662RM - ‘15, 230 Hrs, Material Transfer w/Hopper, #C000763 ....................$435,950 LEEBOY 8500 HD - ‘00, 2915 Hrs, Hatz 3 Cylinder, Diesel Engine w/8-15’ Legend Propane Screed Electronic Grade Controls, Ready to Work, #C000969..........................................$31,000 MIDLAND SPD6 - ‘15, 452 Hrs, Right and Left Discharge 1-6 ft, Hyd Strike Off, Hyd Pushrollers, Washdown System, #C000820 ........................................................................................$99,950 MIDLAND SPR6 - ‘15, 200 Hrs, Right Hand Discharge, 1-6ft, # C000914 ......................$101,950 MIDLAND SPD8 - ‘16, 92 Hrs, Dual Discharge to 8 ft, #C001018 ..................................$165,950 MIDLAND SP10 - ‘03, 3682 Hrs, Dual Discharge, Deere Powered, ***3-1ft Ext, 4-2ft Ext, 2-3-4ft Hyd Ext, #C000926 ..............................................................................................$69,950 P.O.R. items may be on rent causing pricing and hours to vary.

MILLING MACHINES BOMAG BM1200/35 - ’15, 450 Hrs w/Tracks, 3ft and 4ft Drum, Front Conveyor, #C000846 ........ ........................................................................................................................................$369,950 BOMAG BM1300/30 - ’16, 308 Hrs, 51”, 4 Track Milling Machine, #C000993 ..............$324,950 CATERPILLAR 950G - ‘03, Transfer Station Machines, Solid Tires ........3 From $31,950-$39,950

Manitowoc 12000 (‘07) 100 Ton Crawler Crane, 200’ Boom, 60’ Jib, 3rd Drum

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for:

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock.

CRUSHING AND SCREENING KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’ ................................................................$115,950 NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More ......................P.O.R.

ROLLERS SAKAI R2H2 - ‘16, 84”, 3 Wheel Static ................................................................CALL FOR PRICE SAKAI SW652 - ‘ 15, 386 Hrs, 58” Double Drum, Vibratory Rollers, #C000744..............$72,505 SAKAI SW990 - ’14, 1200 Hrs, 84” Double Drum Vibratory Roller, #RR10133 ..............$116,335 SAKAI SW502 - ‘13, 964 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212 ..........................................................................................................................................$29,990 SAKAI SW300 - ‘13, 149 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ............ ....................................................................................................................................$33,819.31 SAKAI GW750-2 - ’14, 445 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ................ $112,200 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS

Manitowoc 222 (‘02) 100 Ton Crawler Crane, 200’ Boom, 140’ Luffing Jib, 60’ Jib, 3rd Drum

AGGREGATE EQUIPMENT JCI K-400 PORTABLE CONE CRUSHER, 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. Leveling Jacks, Tri-Axle Running Gear, 2006 ................................................................................$345,000 JCI 6X20TD PORTABLE SCREEN PLANT, Underscreen Discharge Conveyor, Two (2) Cross Conveyors, Electric Control Panel, 2012 ..........................................................................................................$162,000 CEDARAPIDS 4136 PORTABLE TWIN ROLL PLANT, Allis 5’x16’ SD Screen, Cummins V-12 Power, Tandem Axle Chassis, Hydraulic Leveling ......................................................................................$61,000 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year......................................................................................................$360,000

CRANES MANITOWOC 14000, 2007, 220 Ton Crawler Crane, 292’ Boom, 70’ Jib, 48” Shoes, Self-Erecting System, Series 2 CWT ............................................................................................................P.O.R. GROVE TMS900E, 2005, 90 Ton Hyd Truck Crane, 142’ Boom, 56’ Jib, Aux Hoist, Boom Dolly ...... ..........................................................................................................................................$389,000 GROVE GMK5225, 2013, 225 Ton Hyd AT Crane, 210’ Boom, 112’ Jib, Aux Hoist, Boom Dolly ...... ................................................................................................................................................P.O.R.

SCRAP HANDLING EQUIPMENT

GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000 GRADALL XL4100 II - ‘05, 16664 Hrs, Workable, #C1052 ................................................$35,950

Contact Tim or Marty in Illinois

1-800-307-0221

treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

LIEBHERR R954BHD WITH A LABOUNTY MSD4500R SHEAR, Carrier and shear have been refurbished........................................................................................................................................CALL Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113 Visit us at: www.amstate.com

Page 8 â€˘ November 19, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

MINNESOTA Burnsville 800.552.1189 Duluth 800.835.6225 Mankato 800.862.6225 Rochester 800.562.1505 T Roseville 800.704.0935 St. Cloud 888.310.6225

Renting or buying Volvo has you covered

Some companies have you choose power or fuel efficiency. You chose both.

XXX OVTTHSQ DPN

Uptime is not optional â€“ we make sure you never have to choose between performance or productivity. We worko hard to ensure you spend you are . more time on the ajob site and less time in the shop. Whether o buying or renting, Volvo guarantees the same quality, power & durability for all machines. Choose the equipment you need from a name you trust â€“ Nuss Truck & Equipment

A L

Smart Works.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 OFF ROAD HAULERS

Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 very good condition . . . . . . . . . . . . . . . . . . .$159,000 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" TRUCKS & TRAILERS hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd (2) 48' Box Vans w/Liftgates, Good Condition . .CALL angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 AIR COMPRESSORS LANDSCAPING

CRAWLER TRACTORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, SPECIALS winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . type, (4) MH lights, excellent . . . . . . . . .From $5,200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. BACKHOES CRANES Case 580L Rubber Tire Loader Backhoe, 1997, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Ford 455C Loader Backhoe, 1990, 36” Rear Bucket, Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom 8532 HMR, Overall in Decent Condition . . . . .$10,500 anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 DRILLS MOTOR SCRAPERS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Cat 613C Water Wagon, 1994, 5000 gal drop tank, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good MISCELLANEOUS condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL (2) Balderson Broom Attachment for Cat IT Machines, Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Rivinius R600B, 1995, 10’ Wide, Mount on Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 HYDRAULIC EXCAVATORS JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL

ATTACHMENTS

BUCKETS PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Erb Equipment Celebrates Newly Expanded Location

rb Equipment Company held an open house celebration at its newly expanded branch in Paducah, Ky., on Nov. 4. The event was held from 11:00 a.m. to 3:00 p.m. and lunch was served to attendees. Since 1944, Erb Equipment Company has been serving its customers’ needs from eight branch locations throughout Missouri, Illinois, Indiana and Kentucky, including its main office in St. Louis, Mo. The family-owned company’s main equipment line is John Deere, and it also carries NPK, Genesis, Bomag and Trail King, among others. For more information, visit erbequipment.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

The Erb Equipment Company store is located at 6115 U.S. Hwy 45 in Paducah, Ky.

see ERB page 14

(L-R): Jake Wolf, Erb Equipment Company, Clark Churchwell of Churchwell Excavating and Chuck Meier of Erb Equipment Company talk about this John Deere 333G track skid steer.

(L-R): Gregg Erb, president and director of sales, Erb Equipment Company; Philip Hamby, Hamby Construction Inc.; and Jeremy Futrell, Erb Equipment Company, stand in front of the John Deere 1050K dozer on display at the open house.

Chris Hill (L) of IHM Used Parts and John Denton of Waste Path Services LLC take a closer look at this John Deere 1050K dozer. (L-R) are Benny Hawes, Erb Equipment Company; Kerry Booth of Daniel Murphy Logging; and Steve Fallert, Erb Equipment Company.

Gregg Erb (L), president and director of sales, and Randy Hoerman (R), new equipment sales manager, both of Erb Equipment Company, welcome Hal Coffey, Coffey Construction Company, to the open house.

(L-R) are Lee Goode, Erb Equipment Company and Matt Foley and Corky Hook, both of Calvert City Terminal LLC, a SCH Services company.

Mike Canon (L) and Charlie Radcliffe (R), both of Calvert City Terminal LLC, a SCH Services company, say hello to Bob Erb, chairman of Erb Equipment Company.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 Williston 701.570.5309

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA North Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

incredible fuel efficiency outstanding power & productivity Volvo is with you. Optimum power, versatility and fuel efficiency comes with the name you’ve trusted for over 80 years. With unwavering reliability and dependability, Volvo ensures you get the job done day after day.

ascvolvo.com

Smart Works.

Page 12 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

800-333-5993 Chase Lang Ext. 2210 clang@altorfer.com Corporate Office Cedar Rapids, IA.

Locations in Iowa, Illinois & Missouri BUY • SELL • CONSIGN • RENT

Complete inventory & photos at:

www.altorfer.com

2012 CAT CB64, Stk# 1611U005, 755 Hrs, Water Sys, Versa-Vibe ..............................................................$99,000

2012 CAT 740B, Stk# 1510U020, 2227 Hrs, A/C, Ejector, 29.5R25 ................................................................$319,000

2013 CAT D6T LGP, Stk# 161U022, 2491 Hrs, VPAT Blade, ARO, Winch ..............................................$264,000

2011 CAT 140M2, Stk# 168U023, 4459 Hrs, A/C, VHP, Lft Grp, 14’ Blade..................................................$198,000

2013 CAT 316EL, Stk# 162U083, 1590 Hrs, A/C, Coupler, 10’2 Stick ..............................................................$137,500

2012 CAT 980K, Stk# 164U041, 13141 Hrs, A/C, Ride Control ..................................................................$154,000

2012 CAT 349EL, Stk# 162U050, 2895 Hrs, A/C, CWT Removal ................................................................$313,500

2006 CAT D8T, Stk# 141U062, 6948 Hrs, A/C, SU Blade, Drawbar ................................................................$269,500

2013 CAT 324EL, Stk# 162U060, 1135 Hrs, A/C, 9’6” Stick, GP Bucket ..................................................$187,000

2012 CAT 730, Stk# 1510U016, 4541 Hrs, A/C, 23.5R25 Tires ......................................................................$198,000

Scan to sign up and receive promotions and product news!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 13

> ÊÕÃÊÌ `>ÞtÊ ÀÞ> Ê > }iÀ ÊnÈÈ®Ê{nx Ç£näÊ

ww ww.RBused.com

Celeb bratiing g our 30th Year!

1997 CAT 953C, #8891, CAB/AC, GP BKT, SINGLE-LEVER, 6500 HRS............................$76,500

2001 CAT 953D, #82108, CAB/AC, SINGLELEVER, 2100 HRS..................................$197,500

1990 CAT 963 LGP, #91618, CAB/AC, GP BKT, 2007 CAT 963D, #82060, CAB/AC, 22” TRACKS, RIPPER, NEW ENGINE, NEW A/C, 11,600 HRS .... GP BKT, DOUBLE-LEVER, 5900 HRS ....$174,500 ................................................................$49,500

2007 CAT D6T XL, #81914, CAB/AC, 24” SHOES, 5900 HRS ..............................................$219,500

2007 DEERE 850J, #92030, CAB/AC, 24” SHOES, PAT BLADE, SWEEPS, NEWLY PAINTED, 3900 HRS........................................................$159,500

2012 KOMATSU D65EX-17, #82385, CAB/AC, 22” TRACKS, 6-WAY BLADE, RIPPER, SWEEPS, KOMTRAX, 3200 HRS............................$189,500

2008 KOMATSU D51EX-22, #82275, CAB/AC, 20” SHOES, PAT BLADE, REAR HYD, KOMTRAX, 5850 HRS ................................................$99,500

2012 KOMATSU PC138US LC-8, #82648, CAB, 2006 KOMATSU PC228US LC-3, #82164, 2014 KOMATSU PC360 LC-10, #82391, CAB/AC, 23.5” SHOES, STEEL TRACKS, BLADE, AUX HYDS, CAB/AC, JRB QC, HYD THUMB, 5200 HRS .......... 33.5” SHOES, 10’6” ARM, REAR CAMERA, KOMSTRICKLAND HYD THUMB, 2000 HRS $119,500 ..............................................................$139,500 TRAX, REAR CAMERA, 8300 HRS ........$169,500

2008 KOMATSU PC400 LC-8, #91887, CAB/AC, 35.5” TRACKS, 13’ ARM, JRB QC, AUX HYD, KKOMTRAX, REAR CAMERA, 8300 HRS $169,500

2007 KOMATSU WA200-6, #82234, CAB/AC, 2004 KOMATSU WA250-5, #81867, CAB/AC, QC/BKT, RIDE CONTROL, LSD AXLES, KOMTRAX, QC/BKT, 4100 HRS ..................................$99,500 4400 HRS ................................................$99,750

2011 KOMATSU WA380-6, #81996, CAB/AC, GP BKT, 23.5-25 TIRES, KOMTRAX, 7700 HRS............ ..............................................................$129,500

2013 KOMATSU WA320-7, #82396, CAB/AC, QC/BKT, 3RD VALVE, LSD AXLES, KOMTRAX, 1100 HRS ..............................................$179,500

Page 14 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Erb Equipment Company Showcases Paducah, Ky., Branch ERB from page 10

Pam Bucher (C), wife of the late Ralph Bucher, an employee of 30 years of Erb Equipment Company and manager of the Paducah, Ky., location, receives a warm welcome to the open house from (L-R) Bob Erb, chairman, Randy Hoerman, new equipment sales manager, Carrie Roider, CEO, and Gregg Erb, president and director of sales, all of Erb Equipment Company. Santos Tecita (L) of Daniel Murphy Logging and Alfonso Pugh of John Deere Remanufacturing attend the event.

Juan Raya, divisional sales manager, John Deere construction and forestry, addresses the customers at the open house in Paducah, Ky.

(L-R): Dewain and Sara Gipson of Gipson Farms LLC enjoy the open house with Bob Erb, chairman of Erb Equipment Company. Anthony Shumaker (R), Erb Equipment Company, welcomes the group from LeCows Farms LLC, including (L-R) Dan Clark with grandson, Grant, Lesa Clark and Ellie and Dustin Waggoner.

(L-R): Robert Wood and Steve Copeland, both of Wood Brothers Excavating, are guided through the facility by John Johnson, Erb Equipment Company.

Matt Heisel (R), used equipment manager, Erb Equipment Company, talks with Danny (L) and Seth Thompson of Do-All Excavating Inc. about used equipment available at the branch.

Daniel Murphy of Murphy Logging inspects this John Deere 35G mini-excavator equipped with a NPK PH-2 hydraulic hammer.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 15

Lull 944E-42, 9000lb, JD 700K, LGP, 30” 42’, 4x4, #98046............ Pads, 132” PAT Blade, 722 hours, #99982 ........ ........................$61,000 ......................$163,000

JD 160DLC, 10’2” Arm, JD 180GLC, 10’ 6” Arm, JD 200DLC, 7’ 3” Arm, 28” Pads, Aux Hyd, 28” Pads, #91793.......... 28” Pads, Hyd Thumb, 2020 Hrs, #94937.......... #97839 ..........$129,000 ........................$118,000 ......................$121,000

CEC Screen, 6 x 16 JD 200CLC, 50’ Super Wheeled Screen, Long Front, 32” Pads, #75486..............$59,000 #91758 ..........$259,000

JD 350GLC Material JD 844J, Cab, Air, 3 JD 670CH, Low Cab, Air, Handler, 1111 Hrs, Spool, 7.25 Yd Bkt, 12’ Blade, Ripper, #97020 ............$98,000 #52129 ..........$398,000 #93202 ............$89,000

JD 744H, Cab, Air, Ride, JD 410J, Cab, Air, 4x4, GP Bkt, #99959 ............ Ext Hoe, Aux Hyd, 854 ........................$79,000 Hrs, #100766....$83,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 850J, 22” Pads, JD 755D, 22” Pads, GP Winch, 128” Semi U Bucket, 2532 hours, Blade, #100823 $119,000 #98185 ..........$149,500

JD 850K, LGP, 36” JD 710K, Cab, Air, 4x4, JD 650J, LGP, 24” Pads, 152” Semi U Ext Hoe, Aux Hyd, 638 Pads, 124” PAT Blade, Blade, #75189 $179,000 hours, #99440 $125,000 #99973 ............$62,500

JD 700J, XLT, 22” Pads, JD 544J, Powerlell, QC, 120” PAT Blade, #75380 GP Bucket, #93862 ...... ........................$73,500 ........................$84,000

Page 16 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case Unveils G Series Wheel Loaders at Tomahawk Facility Case Construction Equipment unveiled its new G series wheel loader to the press at its 500-plus acre Case Tomahawk Experience Center located in Tomahawk, Wis. The unveiling kicked off with a presentation by Andrew Dargatz, brand marketing manager, wheel loaders, Case Construction Equipment. “This is a very exciting time for many groups throughout CNH Industrial,” said Dargatz. “Our teams represent the best in hydraulics thermal engineering, ergonomics, and our teams have been perfecting SCR engine technology both in on-road and off-road technology for years. Our world-class manufacturing plant in Fargo, N.D., and of course our commercial group work with dealers and customers to better understand market demand and opportunities. Our groups work together as a cohesive team to ensure that the G Series wheel loaders lowers the total cost of ownership.” The all-new G Series wheel loader line consists of seven new models scaled for a variety of applications, from supply yards, building construction and agriculture, to quarries and mass excavation. These loaders address key factors to lower the total cost of ownership. Productivity and Efficiency “Wheel loaders are the ultimate production machines, said Dargatz. “Whether they are running 12 or 14 hours a day in batch plants, pits and quarries, loading trucks at feed lots all day at corporate dairy farms or keeping us safe, running all day and all night in the coldest of conditions plowing streets and parking lots.” With this in mind, Case designed the G Series wheel loader FPT engines that feature SCR technology to meet Tier IV Final standards. Case was the first to introduce SCR into heavy construction equipment and has the industry’s most practical SCR experience in the field, according to the manufacturer. Each loader leverages the best in hydraulic and electronic technologies to fully optimize machine output and performance, providing a comprehensive solution that achieves exponential fuel savings compared to the competition

and older equipment. These systems combine to provide the operator with a choice of four operating modes that best match engine output to application, ensuring the machine only expends as much fuel and power as required for the job. SCR also allows the engine to breathe cooler and cleaner, ensuring optimal productivity and helping to minimize wear associated with excessive heat and the see CASE page 40

Jeff Jablonski, Tomahawk product promotion specialist, goes over the features of the Tier IV Final FPT F4HFE613 engine in the 821G wheel loader.

Andrew Dargatz, brand marketing manager, wheel loaders, Case Construction Equipment, goes over the features of the Case 1121G wheel loader.

Robb Coenen, Case product promotion specialist, — touts the Tier IV Final engine featuring Selective Catalytic Reduction (SCR) engine technology of the Case 621G wheel loader.

The press event featured an opportunity to test the new G Series wheel loader line.

The all-new G Series wheel loader line consists of seven new models scaled for a variety of applications.

constRuction eQuiPment guide • www.constructionequipmentguide.com • november 19, 2016 • Page 17

coRPoRate HQ

elmHuRst

Joliet

oglesby

RockfoRd

Hammond

635 W. Lake Street eLMhurSt, iL 60126

16822 W. LaraWay rd. JoLiet, iL 60433

590 Mayer St. ogLeSby, iL 61348

5055 South Main St. rockford, iL 61102

6400 indianapoLiS bLvd haMMond, in 46320

call bobby falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2013 CAT 349E VG TRACK EXCAVATOR SER#: KCN00292 $240,000

2014 CAT 324EL HMR TRACK EXCAVATOR SER#: PNW01572 $219,000

2008 CAT 226B2 CAB SKIDSTEER LOADER SER# MJH12997 $21,000

2005 CAT 287B MULTI TERRAIN LOADER SER#: ZSA02044 $24,000

AC/HEAT, STRAIGHT TRAVEL, 36” TRACK, REAR CAMERA, HD PKG

AC/HEAT, AUX HYD, Q-COUPLER, REAR CAMERA, STRAIGHT TRAVEL PEDAL, GUARDING

EROPS, HEAT, AUX HYDRAULICS, STD FLOW, 60” GP BUCKET

EROPS, AC/HEAT, HYD COUPLER, AUX HYD, HIGH-FLOW

2006 CAT 430E IT BACKHOE LOADER SER# DDT00277 $32,500

2013 CAT 416F BACKHOE LOADER SER#: KSF00629 $65,000

2014 CAT 950K WHEEL LOADER SER#: R4A02045 $220,000

AC/HEAT, EROPS, RIDE CONTROL, 4WD, EXT STICK

AC/HEAT, EROPS, EXT STICK, 4WD, GP BUCKET 1.25CYD

AC/HEAT, RIDE CONTROL, Q-COUPLER, GP-BUCKET; 4.24 CYD, RADIO

2009 CAT CS56 SMOOTH DRUM ROLLER SER#: C5S00825 $92,500

1991 CAT 140G MOTOR GRADER SN# 72V14554 $73,000

2009 CAT 299C MULTI TERRAIN LOADER SER# JSP00363 $49,999

2006 CAT 277B MULTI TERRAIN LOADER SER#: MDH03980 $16,900

AC/HEAT, PRODUCT LINK, EROPS

EROPS, ALL WHEEL DRIVE, 12’ BLADE, LIGHTS

AC/HEAT, HYD Q-COUPLER, AUX HYD, STD FLOW, RADIO

OROPS, STANDARD FLOW, QUICK COUPLER, BUCKET

2012 CAT 730 ARTICULATED TRUCK SER#: B1M03871 $249,000 AC/HEAT, CD/RADIO, PRODUCT LINK, CERT EMISSIONS

2007 CAT D6RIIILGP SER# WRG00784 $75,000

1997 CAT D6R TRACK TYPR TRACTOR SER#: 9PN00643 $52,500

EROPS, AC/HEAT, S BLADE, LIGHTS, ACUGRADE READY

17854 HOURS, EROPS, BLADE; S, SINGLE ANGLE TILT, TOPCON CONTROLS

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 18 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Scan to sign up and receive promotions and product news!

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 19

Volvo Used Equipment Contact your local dealer:

2012 Volvo EC480DL CALL

2014 Volvo L90G $157,900

2012 Volvo EC340DL $170,000

John Doe 123.456.7890 john.doe@dealer.com

2000 Volvo L30 CALL 2012 Volvo A40F, 2999 Hrs............$500,000

Jane Doe 123.456.7890 jane.doe@dealer.com

Dealer Name City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 Contact your local dealer: City, ST

Aring Equipment 123.456.7890 Company, Inc. 13001 City, STW. Silver Spring Drive Butler, WI 53007 123.456.7890 City,King ST Jim 123.456.7890 262.781.3770 Mobile: 414.530.0592 City, 262.781.5053 ST Fax: 123.456.7890 Email: jking@aring.com www.aringequipment.com

2011 Volvo DD138HF 2012 Cat D6T XLVP $75,000 $219,500 2012 Volvo A40F, 2999 Hrs............$500,000

2012 Volvo A40F $405,000

A40 Finance leasing available for 24 months with payments as low as $7,800 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Excavators – Wheeled

Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2012 A25F 2011 Volvo L220G Model,Volvo Hours ............................................................................... $XXX,XXX $189,500 $247,500 Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

Excavators – Crawler Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2013 Volvo EC300DLR 2015 Volvo L70H Model, Hours ............................................................................... $XXX,XXX $220,000 $167,500

Motor Graders Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

2014 Volvo L110H CALL

DO NOT RUN COPY BELOW THIS RULE

DEALER LOGO

2012 Volvo A25F 2012 Volvo$189,500 A40F, 2999 Hrs............$500,000

2012 Volvo L70F CALL

Page 20 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

East Side Access Project Crew Praises Machinery Mobility The Metropolitan Transportation Authority (MTA) in New York is working on one of the largest public works projects currently under way in the United States. The project’s purpose is to bring the Long Island Rail Road into a new terminal and concourse on the East Side, which is being constructed below and connected to Grand Central Terminal. Named the East Side Access Project, it will route the Long Island Rail Road from its main line through New York connections in Sunnyside Yard and through the lower level of the existing 63rd Street Tunnel under the East River. In Manhattan a new tunnel was mined beginning at the western end of the 63rd Street Tunnel at Second Avenue curving south under Park Avenue and entering a new eight-track Long Island Rail Road terminal beneath Grand Central. The new terminal at Grand Central is being constructed 14 stories below ground and features four platforms, eight tracks and a new 350,000-sq.-ft. passenger concourse with approximately 25,000 sq. ft. of retail, which is under construction closer to the surface approximately 50 feet below street level in a part of the Lower Level MNR train yard, formerly known as Madison Yard. The concourse and terminal will be accessed via stairwells, 22 elevators, and 47 escalators. One of the entrances will connect the new concourse to the existing Lower Level Dining Concourse at Grand Central , in comparison to the 19 escalators in the remainder of the LIRR system. The MTA is planning and building

contract with the MTA, one of the only such instances in the entire MTA system, according to the MTA. The new concourse will have more floor space than the New Orleans Superdome. This project will be a game changer for New Yorkers, providing rail service to the east side of Manhattan and relieving congestion at Penn Station. It will serve approximately 162,000 passengers traveling back and forth from Long Island and Queens to Manhattan. The revised budget for the East Side Access project is $10.178 billion; service is scheduled to begin in December 2022. Frontier-Kemper Constructors Inc., New Rochelle, N.Y., is one contractor working on the project, which traces its origins back to the late 1960s when MTA Chairman see ACCESS page 24

The Wacker Neuson 6503 wheeled excavator cleans up a milled area of the tunnel floor. Due to its unique size and maneuverability, the cab is able to spin 360 degrees — without making contact with the tunnel wall — and head back down the tunnel in the opposite direction.

additional entrances at 45th, 46th, and 48th streets. The escalators in the four wellways from the concourse to the two train terminals are approximately 180 ft. (55 m) long and descend more than 90 ft. (27 m). The escalators and elevators are to be operated and maintained by the firm, which was also responsible for designing, fabricating and installing them under a

Frontier-Kemper laborers in the process of building one of the cast-in-place concrete duct benches/walkways.

The Wacker Neuson 5055 loader parked next to the tracks that it has to navigate each day.

Rick Stewart, Frontier-Kemper operator, has high praise for the Wacker Neuson 5055 loader.

The rehabilitation work being done in this section of the tunnel was initially constructed in the 1970s. The walls and ceiling are square compared to the circular construction in other areas of the tunnel. The left lower side of the photo shows the finished duct benches that were completed by Frontier-Kemper. The concrete protects the utilities contained within it and provides and emergency walkway.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 21

USED EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER.

2014 CATERPILLAR 262D, ID# PUC0035, S/N DTB01703, 380 HOURS..............................................$34,800

2004 CATERPILLAR AP1055B, ID# PUC0050, SN# ABB00561, 8787 HOURS ............................................$57,600

2006 CATERPILLAR 163H, ID# HUC0094, SN# ARL00460, 10,541 HOURS ......................................$132,400

2003 CATERPILLAR 140H, ID# HUC0356, SN# 9TN01594, 8302 HOURS ........................................$115,300

2015 CATERPILLAR 289D, ID# PUC0099, SN# TAW02576, 548 HOURS ............................................$59,700

2005 CATERPILLAR 330CL, ID# HUC0357, SN# DKY02874, 14,225 HOURS........................................$58,900

2001 CATERPILLAR D7R, ID# PUC0010, SN# 2EN01182, 19,436 HOURS ........................................$98,900

2015 CATERPILLAR 272D, ID# PUC062, S/N B5W00981, 3692 HOURS ..........................................$33,600

2014 CATERPILLAR 924K, ID# PUC0070, SN# PWR03454, 611 HOURS ..........................................$135,000

1995 CATERPILLAR 980F, ID# PUC0051, SN# 8JN00443, 24,963 HOURS............CALL FOR PRICING!

2012 CATERPILLAR 627H, ID# HUC0287, S/N# DBW00218, 6270 HOURS ......................................$495,500

2014 CATERPILLAR 262D, ID# HUC0361, SN# DTB01351, 1760 HOURS............................................$35,900

2013 CATERPILLAR 246D, ID# PUC0078, SN# BYF00250, 327 HOURS ....................................$34,700

2012 CATERPILLAR 279C, ID# PUC0138, SN# KWB00749, 875 HOURS ..................................$42,500

2014 CATERPILLAR 279D, ID# PUC0033, SN# GTL00955, 2112 HOURS ..................................$45,500

2007 CATERPILAR 277C, ID# PUC0133, SN# JWF00243, 4533 HOURS ..................................$24,500

Page 22 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

563-872-4112

(DUBUQUE) BELLEVUE, ELLEVUE, IOWA

WWW.JJSCHECKEL.COM

CLEAN, WORK-READY EQUIPMENT IN IOWA - WE OWN WHAT WE ADVERTISE! RENTOR

RENTOR

BUY!

2007 SMI 516T SPYDER - $150,000 $ ‘07 SMI 4043T CRUSHER - $215,000 2009 CAT D10T - $245,000 2007 CAT D D10T 10T - $295,000 2006 CA CAT AT D10T - $245,000 Hrs,, Mobile track, way screen. l llike bl d w/ twin 2,800 Hrs b l tr ackk, 600 TPH, 3 way screen. BBelts elts likke Mobile TTrack RRJG JG SSeries, eries, Erops, Erops p , U blade bladde w/ twin bl twin tilt, tiltl , Single Single gl shank LLow ow hour h components, componen p nents, Erops, Erops p , U blade twin tilt, tilt, rack Moun Mounted ted Impac Impact p t CCrusher, rusherr, 4,900 Hrs Hrs,, RRJG JG series, series, Low Low hour ccomponent omppponent hist history, ory,y, EErops, rops p, new,, OOriginal lifee as ttopsoil Remotee 300 TPH, CCompletely ripper, ripper, undercarriage. new riginal g ppaint. paint. Easy Easy lif opsoil p il sscreen. creen. Remot pp r,, New New track trackk groups. gr g oups pps. SService ervice rrecords ecords vailable ingle g shank ripper ery good g d under carriage g . 1 Owner, Ownerr, d aavailable. il bl . SSingle ipp r,, VVery f b h . Remot Remotee CControl. ripper, d w// twin Very good, ompletely rrefurbished. efurbished ontrol. Single Single g shank ripper pp r,, U BBlade lade twin tilt, tilt, Very good, ripper control, Buy.. Side spentt in 2012 for service history. spentt iin rrebuilds yrs.. controll, HHyd yd ffoldable oldable ld b cconveyers. onveyers. RRent/Lease ent/L /LLease or Buy 84k spen for ccomplete omplete rebuild rebuild by by CAT CAT dealer. dealerr.. FFull ullll ser vici e hist hi ory. $354k 54k spen ebuilds b ild last l 3 yrs Buy.. clean rom reputable reputable original owner. Side stacker stacker & magnet options. options. RRent/Lease ent/Lease or Buy l condition. condition. d FFrom ownerr. $584k

RENTOORR

BUY!

1996 CAT D9R - $225,000 2008 CAT D9T - $265,000 ull SScraper craper p TTractor, ractorr, 7TL series serie series,, 0 hour engine. g 15,000 Frame Frame hours, hours, Zero Zero hour engine g & final drives. drives. D9R PPull Rigged gg to to newly ly cconverted/rebuilt onverted/rebuiltt 631 ppullll scraper, p r, Undercarriage Undercarriage g like like new, new, Rebuilt R b l blade, blade bl d , Rippers Rippers pp avail. avail. Rigged pricedd separ separately. ately l . EEx Excellent cellent UC. EEx Extra tra clean. l RReady d to to go go.. Clean Clean & straight straighht machine. machine. Rent/Lease Rent/Lease se or Buy. BBuyy.. priced

RENTOR

BUY!

1987 CAT D9N - $59,000 1JD SSeries, eries, 11,300 Hours, Hours, Low Low profile p ofile open pr p cab, cab, LLever ever st steer, eerr, SU blade w/ tilt tilt,, CCWT WT DDrawar, rawarr, Auxiliary Auxiliary hhydraulics, ydraulics, Nic Nicee loc local al tr tractor. actorr. AAllll original original..

BUY!

2003 CAT D6R LGP - $65,000 LLocal ocal tr ade in, DDiff iff steer, steerr, A/C, A Good Good UC, Erops. Erops p. trade 11,300 HHours, ours, 3,300 aatt idle. idle. Original Original g condition, condition, original pain traight blade l d w// tilt. tilt. paint.t. SStraight

BUY!

2012 CAT 740B - $215 $215,000 5,000 frf ame hours; h at idle. idle dl . Fully Fullllyy lloaded, loaded 7,700 frame 1,650 at d , A/C, Tailgate, Tailga g te, 4 New New Radial Radial tires. tires. Well Wellll maintained main i tained i truck, truckk, ready ready to to go go.. RRent/Lease ent/Lease or Buy Buy. y..

RENT

BUY!

2012 CAT 336EL - $185,000 $160,000 2012 CAT D6N LGP - $ 160,000 3,800 HHours, ours, GPS AAccugrade ccugr g ade rready. eadyy. Erops, Erops p , Sweeps, Sweeps, A/C, 2,900 Hrs Hrs,, FFully ullyy loaded loaded, oaded, 13’ stick stick,, AAuxilliary uxilliary Hy Hydraulics ydraulics steer, drawbar, DDiff iff st eerr, Aux Aux hydraulics, hydraulics awbar at SSystem yystem 1 w/ w li , Rear ddr b r, CCat work ork ttool ooll ccontrol ontroll pr program, p ogr g am, PPattern attern changer changer. g . NNew ew Buy.. UC, 1 OOwner, wnerr, Excellent Excellent condition. condition. RRent/Lease ent/Lease or Buy 48”” buck bucket. et. DDeluxe eluxe cab. cabb. Rent/Lease Rent/LLease or Buy Buy..

RENT

BUY!

2013 CAT 329EL - $168 $168,000 8,000 , 2012 CAT 320EL - $ $142,000 1994 CAT 992D D - $470,000 , 3,800 Hrs Hrs,, FFully ully lly lloaded loaded, d d, 10’6”” stick stick, k, HHydraulic yddraulic l quick q 2,200 Hours, Hours, 46”” buck bbucket, ket, 9’6”” stick stick, sti ickk, A/C, rrear ear view Fullyy rrefurbished, Fully efurbished f b h d, $$352,0000 w work orkk order order d just j spent. spen p t. ccoupler, oupler p r,, Auxiliary Auxiliar Longg and annd wide camera, Aux Aux hydraulics hydraulics available, ery nic 2,000 hour main ccomponents. ompp omponen ts. New tiri es!! ili y hydraulics, hydr d aulics, Long id UC. UC camera, available, VVery nicee machine, machine, 2 New tires! 42”” bbuck bucket. ket. 1 OOwner, wnerr, vvery ery clean. RRent/Lease ent/L /LLease or BBuy Buy.. Fully Fully serviced, serviced, Excellent EExcellent condition. condition. Rent/Lease Rent/L /Lease or Buy. Buy. CCall all ffor or ddoc documents. uments.

RENTOR

BUY!

2009 CAT D8T - $235,000 2014 CAT D6T XW VPAT - $285,000 8,300 Hrs Hrs,, 2,800 at at idle. idle. Erops, Erops p , A/C, SU BBlade, lade, Multi- OOnly nlyy 906 original g hours hours,, 302 aatt idle idle.. EErops, rops p , A/C, HHeat, eat, shank ripper, ripper pp r,, Excellent Excellent UC. Service Service history history since since new. new. GPS PS ready, ready dyy,, DDiff iffff st steer, eer err, 6-w 6-way ay PPAT PAAT blade, blade, AAss close to to new Cleanest Cleanest l D8T D on the market. m et. Rent/Lease mark Rent/Lease or Buy Buy.. as yyou ou will find! SSuper uper clean. RRent/Lease ent/Lease or Buy Buy.. OR OR O R

RENT

RENTOR

2012 CAT D6T XW - $265,000 2012 CAT D6T XL - $165,000 hours,, 139 aatt idle idle.. EErops, OOnly nlyy 943 original g hours rops op , A/C, HHeat, eat, 4,795 OOriginal riginal g hours hours,, 1,249 IIdle. dle. EErops, rops p , A/C, DDiff iff steer, blade, screen, drawbar. DDiff iffff st eerr, SU bl blade d , SSweeps, weeps p , Rear scr eenn, RRear dr awbar. st steer, eerr, PPaccar accar PPA56 AA56 winch, SU BBlade, lade, SSweeps, weeps p , Rear AAss close ttoo new as yyou ou willll find! RRent/Lease ent/Lease or Buy. Buy. scr screen, een, Ex Excellent cellent under undercarriage. carriage. RRent/Lease ent/Lease or Buy Buy.. OR OR

RENT

RENTOORR

BUY!

RENTOR

BUY!

RENTOR

BUY!

2012 CAT 980K - $155,000 2012 CAT 980K - $210,000 ame hours hours,, 4,200 w were ere IIdle. dle. Ma Matching tchingg TTitan itan 8,219 hours hours,, 2,364 IIdle. dle. Ma Matching tchingg GGoodyear oodyyear rubber. rubber. 13,500 frframe tires. es. 7 YYard ard GP str straight aigh g t edge buck bucket. et. TTA2 AA2 ttested. ested. 7 YYard ard straight straight g t edge g bucket b et w// tteeth. buck eeth. h TA2 TA2 A TTested. ested. LD250 tir OOriginal riginal pain paint,t, original riginall oowner. wnerr. Clean Clean l and str straight. aight. OOriginal riginall pain paint.t. PPriced riced wholesale!

RENTOR

BUY!

) CAT 627G 27G - $255,000 Ea. (2)2012 ) CAT 740B’s - $ $188,000 EA. (2)2006 CAT 740’ss - $128,000 EA. (2)2008 B1P B P Series. Series. All All 3 bought bough gghht new together. together g h . 9-10,000 ffrframe ame hours; h 3,000 aatt id d . OOriginal dle dl riginal g l pain idle. paint,t, PPush/Pull, ush/P h ullll, 100% NNew ew w Rubber Rubber, bb r,, 9-11,000 hhrs withh FFull ull ser service vice hist history, ory, GGood oodd rrubber. ubber. FFully ully lly loaded loaded.. FFully ullyy loaded, loaded, A/C, 90% Radial Radial tires. tires. SSuper uper p lots of idle time rrecorded, ecorded, original paint, paint, super clean SSolid olid machines, machines, ready ready d to to go. go. Rent/Lease Rent/LLease or Buy. Buy B y.. clean tr ucks k rready eady ttoo go ent/Lease or Buy B . trucks go.. RRent/Lease Buy. units units,, $255,000 each. ch. h Rent/Lease Rent/Lease or Buy

J.J. SCHECKEL RENTS 1/3/6 Mo Co Contracts. ontracts. Re Rent/Purchase nt/Purrchase Options.

RENTOR

BUY!

2013 CAT AT CP56B - $89,000 84”” VVibratory ibr b atory ppa pad add ffoot. oot. 2,460 hours hours,, FFront ront bl blade riginal g l paint. ppain i t. Very Very well well maintained. maintained. Fully Fully option, OOriginal ser vici edd andd rready e d to eady to go ent/Lease or Buy. Buy. serviced go.. RRent/Lease

VISIT OUR WEBSITE FOR DETAILED PHOTOS DESCRIPTIONS! AND DESCRIPTIO ONS! WWW.JJSCHECKEL.COM WWW.JJSCHE ECKEL.COM

Ph: 563-872-4112 | Fax: 563-872-5058 | sales@jjscheckel.com sales@jjscheck s el.com | 21582 Hwy 62,, Bellevue, Bellevue, Iowa Iowa 52031 | www.jjscheckel.com www w w.jjscheck .jjscheckel.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 23

ILLINOIS

Finkbiner Equipment www.finkbinerequipment.com CHICAGO (630) 654-3700 (800) 307-0221

INDIANA RECO Equipment, Inc. www.recoequip.com INDIANAPOLIS (317) 781-8100

Finkbiner Equipment www.finkbinerequipment.com LAKE (630) 654-3700 (800) 307-0221 PORTER (630) 654-3700 (800) 307-0221 LAPORT (630) 654-3700 (800) 307-0221

KENTUCKY RECO Equipment, Inc. www.recoequip.com FLORENCE (859) 727-7970

MINNESOTA American State Equipment www.amstate.com MINNEAPOLIS/ ST. PAUL (651) 464-0996 (612) 849-6332 DULUTH (800) 236-6900

OHIO RECO Equipment, Inc. www.recoequip.com BELMONT (740) 782-1314 COLUMBUS (614) 276-0001 MONROE (513) 539-5255 RICHFIELD (330) 659-0800 PERRYSBURG (419) 874-6001

WISCONSIN American State Equipment www.amstate.com MILWAUKEE (414) 541-8700 (800) 236-6900 WAUSAU (715) 675-6900 (800) 242-7113 LITTLE CHUTE (920) 788-6646 (800) 236-8318

Page 24 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Project’s Tight Spaces Require Specialized Equipment

This Wacker Neuson machine is responsible for loading and unloading the material that comes into the tunnel and debris that goes out.

This Wacker Neuson brings a load to the railcar while also navigating a set of tracks.

ACCESS from page 20

Ronan provided the MTA’s first masterplan to Gov. Rockefeller, which included the first vision of LIRR access to the East Side. FrontierKemper is currently performing a $300-million-dollar contract that is expected to be completed next summer. One crucial piece of the project according to Bill Vollmer, general Before placing the final concrete lining, Wisko superintendent for Frontier-Kemper, installs a PVC waterproofing membrane. is the rehabilitation and modernization work is used for carrying forms and demolishing in the lower two tunnels of the existing 63rd (breaking out) concrete. This unit is one of the strongest machines Street Tunnel. “The tunnel was initially constructed in in its weight class and actually performs the early 1970s and the walls and ceiling in more like a machine in the next size weight The new terminal under construction is 14 stories below Grand Central Station. this area are squared off,” he said. “You will class, according to the manufacturer. “We have two larger excavators that we need, but none that give us the maneuver- pleased with the Wacker Neuson 5055 allknow that you have entered the new area of tunnel construction when the walls and arch are using for concrete demolition and exca- ability and the reach that we get from the wheel steer loader he has been using. The vation that we have on rent from CAP Wacker Neuson. become rounded. 5055, which features a long wheelbase for “The work area is extremely compact and Equipment [New York City’s authorized “We thoroughly investigate the capacities smooth driving and easy handling even the Wacker Neuson compact excavator is Wacker Neuson dealer], but these machines of equipment before we put it on the job. In across the roughest terrain, has counterideally sized for the tight quarters and can do not give us the maneuverability that we this case we also worked closely with weights located far behind the rear axle for execute turns that were previously impossi- get from the Wacker Neuson machine. To Vincent Caporaso [CAP Equipment vice higher payloads and more stability. Its allmake matters worse, there are rail tracks that president] to match up the exact models wheel steer and rigid frame provide ble.” Frontier-Kemper’s work includes coming have been laid down the center of the tunnel from Wacker Neuson to achieve our objec- enhanced maneuverability and constant payin after the boring machines have made the so our operators not only have to deal with tives.” load stability even when turning, according initial excavation; waterproofing the walls confined spaces, but maneuvering the Frontier-Kemper handles a lot of its own to the manufacturer. and ceiling and then placing a concrete lin- machine back and forth across rail tracks service and maintenance on the machines “The machine I’m operating has 3,200 ing and installing conduits within a cast-in- with nearly every move makes it a bigger whenever possible and has several mechan- hours on it and it’s important to note that challenge.” place concrete duct bench. ics on staff. “It is way too costly to try to these are 3,200 tunnel hours; some of the Previous to the tunnel project neither bring a machine up out of the tunnel unless most severe applications imaginable. With The duct bench, which is 4-1/2 to 6-1/2 ft. (1.3 to 2 m) tall and 3-1/2 ft. (1 m) wide, fur- Vollmer nor Frontier-Kemper had any expe- it is absolutely necessary. About the only the severity of the work across the railroad rience with Wacker Neuson. ther restricts the tunnel travel way. time we get involved in bringing the dealer tracks all day there have been times when “We did research coming into the job or the manufacturer into the tunnel to look at the machine has needed repairs, but all of knowing what our challenges would be and an issue is if it is a computer or electronic these have been very easy to execute,” Working in Tight Spaces A Wacker Neuson 6503 rubber-tired the Wacker Neuson had a nearly perfect spec issue that requires specific diagnostic tools. Trainor said. excavator is being used to load, unload and for our unique set of challenges. We do have So, simplicity of repair and maintenance and The Wacker Neuson 550 all-wheel steer move materials, which is critical to the other brands of equipment in the tunnel, machine reliability are critical.” loader is performing beyond expectations, process, according to Vollmer. In addition, it some of which can give us the reach that we Operator Brian Trainor has been very see ACCESS page 52

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 25

2015 E55, A91, 525 Hrs....................................................$60,000

EXCAVATORS 1994 325, 2400 Hrs, Stk# F14128....................$10,000 2001 331, Stk# F11203 ....................................$15,000 2006 35D, 1900 Hrs, Stk# F35813 ..................$24,000 2006 35D, 1850 Hrs, Stk# F35814 ..................$24,000 2013 E35, 375 Hrs, Stk# M16762 ....................$40,000 2015 E35, 375 Hrs, Stk# M11465 ....................$51,000 2014 E50, 300 Hrs, Stk# M11092 ....................$58,000 2015 E55, 510 Hrs, Stk# M11373 ....................$60,000

SKID STEERS 2014 S450, 75 Hrs, Stk# F11273 ....................$27,000 2014 S450, 74 Hrs, Stk# F11206 ....................$27,000 2013 C227, 1114 Hrs, Stk# M42977 ................$29,000 2013 S530, 100 Hrs, Stk# F11057 ..................$32,000 2014 S630, 750 Hrs, Stk# F11707 ..................$32,000 2014 S550, 422 Hrs, Stk# M11526 ..................$33,000

2013 T770, A91, Air Ride, Radio, 1962 Hrs......................$40,000

2014 S570, 133 Hrs, Stk# F12648 ..................$33,000 2013 S570, 211 Hrs, Stk# F13447 ..................$33,000 2015 S530, 70 Hrs, Stk# F13049 ....................$34,000 2014 S570, 409 Hrs, Stk# F11474 ..................$35,000 2014 S570, 404 Hrs, Stk# F11473 ..................$35,000 2015 S570, 333 Hrs, Stk# M13217 ..................$35,000 2014 S570, 281 Hrs, Stk# M12580 ..................$35,000 2014 S590, 441 Hrs, Stk# M11363 ..................$35,000 2013 S630, 476 Hrs, Stk# M15681 ..................$35,000 2015 S550, 50 Hrs, Stk# F11731 ....................$36,000 2014 S570, 78 Hrs, Stk# F12649 ....................$37,000 2014 S650, 355 Hrs, Stk# M11090 ..................$38,000 2015 S570, 253 Hrs, Stk# F13521 ..................$40,000 2014 S650, 297 Hrs, Stk# F12115 ..................$40,000 2012 S750, 578 Hrs, Stk# M12234 ..................$40,000 2014 S650, 11 Hrs, Stk# M24644 ....................$42,000 2013 S750, 693 Hrs, Stk# M12184 ..................$42,000

2014 S570, H51 2 Speed Block Heater Air Ride HD Tires Radio, 133 Hrs..............................................................................$33,000

2014 S650, 156 Hrs, Stk# F13037 ..................$44,000 2014 S650, 167 Hrs, Stk# F13029 ..................$44,000 2011 S850, 650 Hrs, Stk# F11167 ..................$45,000 2013 328E, 213 Hrs, Stk# M244434 ................$46,000 2015 S650, 50 Hrs, Stk# F13494 ....................$52,000 2014 S650, 410 Hrs, Stk# M11630 ..................$56,000

TRACK MACHINES 2013 T590, 1230 Hrs, Stk# M11730 ................$39,000 2013 T590, 896 Hrs, Stk# M11164 ..................$40,000 2013 T750, 1673 Hrs, Stk# M12299 ................$40,000 2011 T770, 2387 Hrs, Stk# F11307..................$40,000 2012 T770, 2253 Hrs, Stk# F11608..................$40,000 2015 L225, 300 Hrs, Stk# M00220 ..................$41,500 2013 T750, 1799 Hrs, Stk# M11998 ................$42,000 2013 T770, 1914 Hrs, Stk# F13780..................$43,000 2011 T750, 1158 Hrs, Stk# F11456..................$44,000

Swanston Equipment Minot

2013 T750, 1200 Hrs, Stk# F12155..................$44,000 2012 T750, 1334 Hrs, Stk# F12205..................$44,000 2012 T770, 1802 Hrs, Stk# F11641..................$44,000 2012 T750, 1281 Hrs, Stk# M12003 ................$45,000 2012 T770, 1101 Hrs, Stk# F11895..................$45,000 2013 T870, 1260 Hrs, Stk# M11796 ................$47,000 2011 TR320, 150 Hrs, Stk# M40318................$48,000 2013 T750, 1019 Hrs, Stk# M12119 ................$48,000 2012 T770, 1096 Hrs, Stk# F11623 ................$48,000 2013 T750, 711 Hrs, Stk# F12150....................$50,000 2013 T750, 908 Hrs, Stk# F11987....................$50,000 2014 T650, 280 Hrs, Stk# M18988 ..................$51,000 2011 T870, 1362 Hrs, Stk# F11379..................$51,000 2015 T750, 781 Hrs, Stk# M14339 ..................$52,000 2013 T770, 890 Hrs, Stk# M12181 ..................$52,000 2014 T650, 500 Hrs, Stk# F11476....................$55,000 2015 T770, 475 Hrs, Stk# M14579 ..................$59,000

Bobcat of Fargo

Swanston Equipment Minot www.swanston.com 3450 West Main • Fargo, ND 58103 (701) 355-5721 • Fax: (701) 293-9468

3915 Burdick Expressway E. • Minot, ND 58703 (701) 355-5723 • Fax: (701) 837-9904

Page 26 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

t ͛s 'Kd zKh Ks Z ͘ tĞƐƚ ^ŝĚĞ WD WůƵƐн dŽƚĂů ĂƌĞͶtĞƐƚ ^ŝĚĞ dƌĂĐƚŽƌ͛Ɛ ŶĞǁ ĐƵƐƚŽŵŝǌĂďůĞ ŵĂĐŚŝŶĞ ƐƵƉƉŽƌƚ ƐŽůƵƟŽŶͶ ďƵŶĚůĞƐ ƉƌĞǀĞŶƚĂƟǀĞ ŵĂŝŶƚĞŶĂŶĐĞ͕ ĞǆƚĞŶĚĞĚ ǁĂƌƌĂŶƚǇ ĂŶĚ ŵĂĐŚŝŶĞ ŵŽŶŝƚŽƌŝŶŐ ƚĞĐŚŶŽůŽŐǇ͘ dŚƌĞĞ ďƵŶĚůĞƐ ŽĨ ƉƌŽƚĞĐƟŽŶ ƚŽ ĐŚŽŽƐĞ ĨƌŽŵ͕ ŽŶĞ ůŽǁ ƉĂǇŵĞŶƚ͘

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

dŚĞ :ŽŚŶ ĞĞƌĞ ŽŶƐƚƌƵĐƟŽŶ Θ &ŽƌĞƐƚƌǇ ĞĂůĞƌ ĨŽƌ /> Θ /E

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 27

CONTACT 888-798-2079 www.adamsequipment.com Your Used Equipment Specialists Since 1957

#10124 CAT D7H HYDRAULIC SU DOZER W/TILT, 215HP, Diesel, Canopy, Powershift Transmission, Differential Steer, Very Good Undercarriage w/26" Pads............................................................$62,000

#9735 CAT D6R XL HYDRAULIC SU DOZER W/TILT, 175HP Diesel, Heat/AC, PS Transmission, Differential Steering, Fingertip Autoshift, Drawbar, Good Undercarriage w/30" Pads ................$78,500

#9789 CAT D6M XL HYDRAULIC 6-WAY DOZER, #10145 CAT D5G XL 6-WAY DOZER, 90HP, 140HP, Diesel, Canopy, PS Trans, FTC Steering, DB, Canopy, Hydrostatic Drive, Good Undercarriage w/ Excellent UC w/NEW Sealed & Lubricated Rail 20" Pads......................................................$38,500 Groups and 24" Pads..................................$52,500

#10113 CAT 140G TANDEM DRIVE ARTICULATED MOTOR GRADER, 150HP, Diesel, Cab w/Heat, Direct Drive, REBUILT PS Trans, 14' MB, LoPro Cab, Scarifier, Good 1400x24 Tires............$71,000

#10109 CAT 320DL 1.3 YD HYD EXCAVATOR, 148HP, Diesel, Cab w/Heat & AC, 9' 6" Stick, 24" Bucket w/Teeth, Very Good Undercarriage w/31" Pads..........................................................$104,500

#10171 CASE SV300 SKID LOADER, 84HP, 4 Cyl Dsl, Encl. Cab w/ Heat & AC, Aux Hyd, Hi Flow, Ride Ctl, Radio w/Aux for Phone, Hyd Disconnect, 2 Speed, Joystick Controls w/Pattern Changer, Block Heater, 84" GP Bkt, 12 x 16.5 Foam Filled Tires ......$31,500

#10122 CAT 279C MULTI-TERRAIN TRACK LOADER, 82HP, Dsl, Cab w/Heat & AC, 80" General Purpose Bkt w/Bolt on Edge, Auxiliary Hydraulics, Very Good Rubber Tracks ..........................$47,500

#10155 CAT T40B 4000 LBS LIFT CAPACITY #10168 GROVE SM327OE ELECTRIC SELFFORKLIFT, LP Gas, Side Shift, 37" Forks, Canopy .. PROPELLED SCISSOR LIFT, 70" x 120" Platform, ......................................................................$2,900 26' Maximum Lift Height, Platform Capacity 1500 lbs. 2WD, 2 Wheel Steer ............................$4,500

#10023 CAT 305C CR MINI-EXCAVATOR, 47HP Diesel, Cab w/Heat, PC, 5' 11" Stick, Swing Away Boom, Aux Hyd, 24" Bkt w/Teeth, Leveling Blade, Good 16" Rubber Tracks ............................$29,000

#10132 CASE 95-XT SKID STEER LOADER, 74HP, Diesel, Canopy, Auxiliary, Hydraulics, 82" Hydraulic Coupler, Bucket w/Bolt on Edge, Good 33 x 15.5 x 16.5 Tires....................................................$16,500

#10160 INGERSOLL RAND SD100D 84" SINGLE #10136 SULLAIR 185H DPQ 185 CFM PORTABLE #10141 BLAW-KNOX RW100 ROAD WIDENER, SMOOTH DRUM ARTICULATED VIBRATORY COMAIR COMPRESSOR, John Deere Diesel, Pintle Hitch 110 HP, Diesel, 10' Paving Width, Belly Mount PACTOR, Diesel, Hydrostatic Drive, Canopy, 58000 ......................................................................$8,000 Broom, Hydrostatic Drive ......................$24,000 Centrifugal Force, Good 23.1 x 6 Diamond Thread Tire..............................................................$44,000

#10009 LINCOLN VANTAGE 300 300-AMP DC PORTABLE WELDER, 22HP Diesel, 300 Amp, 12.5 KW Peak/ 11 KW Continuous Output, 120/240 Single Phase, 240 3-Phase Receptacles......$5,750

For our full inventory, please visit www.adamsequipment.com

Page 28 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

HIGH QUALITY USED EQUIPMENT

MA22084 MA20490 MJ003408

MA20259

’08 CA AT T 950H 3,948 HRS.......$142,000 EROPS, 4.0 CYD BUCKET, 50% TIRES

’12 CA ATT 930H

4,114 HRS ...... $135,000 AC, RIDE CONTROL, 3RD VVAL ALVE

MB20480

’07 KOMA ATSU TSU W WA320 A320 6,415 HRS ....... ..............................................$78,500

MA20811 MA21715

‘12 CA AT T 308E

2,746 HRS ........ $81,000 BKT, LEVELING BLADE, LONG STK

EROPS, 2.8 CYD BUCKET, RIDE CONTROL

MK003555

MA21616 MA20249 MJ003408

’14 CASE 621F

5,588 HRS......$110,000 EROPS, AC, 3RD VALLVE, HIGH LIFT

ButlerIRON.com

‘01 CA ATT 143H

12,478 HRS.......... $69,000 VHPP, SLIP CLUTCH, 60% TIRES

Bill Bauer 701.298.1767

Austin Calavera 701.298.2116

Construction Awards Gala Recognizes Missouri’s Construction Industry The Associated General Pavilion at the Saint Louis Contractors (AGC) of Science Center, St. Louis, Missouri announced the Mo.; winners of its 2016 construc• icon Mechanical tion industry awards on Nov. Construction & Engineering 10 at its gala event at the for BJC-Washington River City Casino & Hotel. University Medical School The Construction Awards Campus Renewal ProjectGala featured the 19th Penthouse, St. Louis, Mo. Annual Construction • S. M. Wilson & Co. for Keystone Awards, which IKEA St. Louis, St. Louis, highlight the creativity and Mo. talents of Missouri’s con• L. Keeley Construction struction industry. This year Company for the Illinois also marks the sixth time the River Transmission ProjectAGC of Missouri has named Mississippi River Cross, first place specialty contracPalmyra, Mo., to Quincy, Ill. tors in 12 disciplines along • Concrete Strategies LLC with the coveted Specialty for Railroad Depot Grand Contractor of the Year Staircase, Poplar Bluff, Mo. award. • Guarantee Electrical Toenjes, CAE, president of The Associated The 19th Annual Leonard Company for William H. General Contractors (AGC) of Missouri, addresses Keystone Awards were pre- attendees. Danforth Wing of the sented to 10 contractors choDonald Danforth Plant sen from a group of 27 finalists covering a broad spectrum Science Center, St. Louis, Mo. of project types, including hospitals, educational buildings, • Guarantee Electrical Company for December 2015 manufacturing facilities, treatment plants, railyards and Flood Mitigation for Metropolitan St. Louis Sewer District, retail. The awards ceremony also honored the owners of the Fenton, Mo. projects in this elite group. • PayneCrest Electric Inc. for Flint Creek Environmental The Construction Keystone Awards are not awarded Retrofit, Gentry, Ark. based upon a project’s beauty. Instead, the Keystone Awards • ISC Contracting Inc. for Varsity Tutors LLC Corporate recognize a contractor’s success in achieving solutions dur- Headquarters, St. Louis, Mo. ing construction for challenges faced on a project. The • Herzog/Reyes, a Joint Venture for Pier E Container Yard awards are a glowing recognition of construction profes- / Intermodal Railyard, Phase I, Long Beach, Calif. sionals whose skill, teamwork and spirit of innovation make The 2016 Keystone Heritage Award was presented to the a lasting contribution to a community by building the facili- Bagnell Dam at the Lake of the Ozarks. Since its first presties that support and enhance the quality of life. Safety per- entation in 1997, the Heritage Award’s purpose is to recogformance and workforce diversity also are essential compo- nize a project of significance and ongoing importance that nents of overall performance. was built prior to the inception of the Keystone Awards. If Keystone Project of the Year winners include: see GALA page 54 • Interface Construction Corporation for the Agriculture

L. Keeley Construction Company took home its first Construction Keystone Award for the Illinois River Transmission project, Mississippi River Crossing.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 29

Genuine quality, no compromise Tried, tested and proven protection for your engine You want to give your engine the best possible protection. 6US` 7LYRPUZ ÄS[LYZ HYL KLZPNULK HUK KL]LSVWLK [V TLL[ 7LYRPUZ L_HJ[ LUNPUL ZWLJPÄJH[PVUZ [OLU YPNVYV\ZS` [LZ[LK PU YLHS SPML JVUKP[PVUZ [V LUZ\YL SVUN SHZ[PUN WLYMVYTHUJL :V ^O` JVTWYVTPZL& *OVVZL 7LYRPUZ ÄS[LYZ L]LY` [PTL

www.perkins.com

Page 30 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2017 summit & condex January 10-13, 2017 | Chicago, IL | Hyatt Regency Chicago

Focus on Your Dealership and Maximize your Business Opportunities

Summit Keynote Presentations

New 2017 Summit, AED is AED featuring professional dealer education on Newtotoourour 2017 Summit, is featuring professional dealer Tuesday, January 10th.on Tuesday, January 10 - Thursday, January 12! education sessions AED wants to provide a convenient program for attendees to grow AED wants to skills provide a convenient program for attendees to grow and and develop unique to the construction equipment industry. develop skills unique to the construction equipment industry. With each With each session, there are tremendous opportunities to expand session, there are tremendous opportunities to expand on existing on existing knowledge while learning new, valuable information to knowledge while learning new, valuable information to take back to take back to your dealership. your dealership.

Visit www.aedsummit.com to view all of the on-site educational options available and to register for the 2017 Summit.

Dick Cheney

Former U.S. Vice President & Secretary of Defense

Daymond John Founder & CEO of FUBU and Investor on ABC’s Shark Tank

Richard Picciotto FDNY Chief & Highest 5DQNLQJ )LUHͤJKWHU WR Survive the World Trade Center Collapse

2006 Case 550HLT 3A Dozer, 3113 Hrs, Stk# P10549 $45,000

Case 580L, 7372 Hrs, OROPS, 4 Stick Controls, stk# P09579 $19,700

2012 Case 580SNWT4A, 1471 Hrs, Cab Heat/Air, Wide Track 4WD Extendahoe, Stk# P05286 $88,500

2012 Case SR175, 1335 Hrs, OROPS, H Pattern Controls, Stk# P07497 $28,700

Case 70XT SSL, 2700 Hrs, OROPS, H Pattern Pilot Controls, Stk# P09546 $22,700

2007 Case Construction 580SM III, 3944 Hrs, Stk# P06371 $47,700

Case TR270 CTL, 478 Hrs, Tier 4 Final, 72” Bkt, Cab w/Heat & A/C, Stk# P09381 $44,700

2012 Case TR320HF CTL, 950 Hrs, High Flow Plus Auxiliary Hydraulics, Stk#P04571 $54,000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 31

Page 32 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Company’s Major Projects Include Indiana Toll Road ANNIVERSARY from page 1

roads and infrastructure to ensure that the state would be ready to enter the motor vehicle age, and that the network be built and maintained in a way that respected the taxpayer. Two years later, Rieth’s friend George Riley, became a partner and Rieth-Riley was born. Riley’s entrance bolstered the company’s finances and his expertise in finance placed it on a firm footing in terms of purchases of equipment and construction materials, investments, and long-range planning. From gravel roads to concrete to asphalt paving, Rieth-Riley was soon building small bridges and it constructed part of the Indiana section of the coast-to-coast Lincoln Highway (U.S. 66) in the 1920s. The company continued to expand in both states, with a major focus on Michigan. Riley retired in 1940 and sold his share of the business to Rieth in 1940. In 1943, Rieth passed away, but the mantle of leadership was immediately taken up by his sons Blair, Bill and Lee, who worked hard to ensure the continued growth of the company. In 1972, the Ford Motor Company hired the company to pave its parabolic test track at the Romeo Michigan Proving Grounds. The company continued to grow, and the three brothers decided that the company’s future lay with the employees, which led to them being the first familyowned heavy/highway construction firm to sell 50 percent of its interests to the employees in 1985. In 1992, the company sold the remander. Today, the company, which employs 1,600, performs more than 60 percent of its business on road and bridge projects for the Indiana and Michigan DOTs and public agencies. In addition to its DOT work, the company also performs site prep work, excavation and the installation of underground infrastructure for hospitals and other institutions, and businesses. The company is striving to expand, and now has asphalt plants throughout Indiana and Michigan; portable concrete plants; aggregate crushing and washing plants; docks on Lake Michigan, which are also used for deliveries of other

materials such as logs and rock salt; many aggregate pits and limestone quarries; and storage terminals. Keith Rose, Rieth-Riley’s CEO, stressed that the company’s future is bright. “No question about it,” he said, “our greatest asset is our employees and the employee-ownership culture. We invest in training and improving the professionalism of our employees from the crews and equipment operators to upper management. We all want the company to succeed and for our employees to able to advance their careers and range of responsibilities. “This translates into satisfied customers,” he said. “We’re only as good as our last job and we work hard to ensure that we deliver what the customer ordered on-time and on-budget. Our quality control is meticulous and they do not hesitate to halt work on a project if the quality is sub-standard. We not only meet the specifications of the individual contracts, but exceed them with our own internal standards. This is well known by our clients, who appreciate our input and suggestions to increase infrastructure lifespans, and reduce construction costs and delivery times as much as possible. He said that the company was founded on integrity and Keith Rose, Rieth-Riley’s CEO. respect for the customer. us to be recognized as one of the “Our founders knew that they premier road construction compahad to deliver for their various nies in the country,” he said. clients and we’ve never compro- “We’ve been brought on to work mised on our values and standards. on many major projects since then, We’ve witnessed the ups and but our success is based on our downs of the construction industry dedication and skills. It all goes and weathered them while some of back to the gravel road we built in our competitors did not survive. 1916. We delivered a quality prodWe never take anything for grant- uct then and that spirit is with us ed, which means that we’re always today.” innovating and learning on the Some of the company’s major job.” projects include: Blair, Bill and Lee worked for • The Indiana Toll Road (1954) the father and started at the crew in St. Joseph County level to gain an understanding of • King’s Highway, Beaver the business and experience all the Island, Mich. levels of it. Rose praised the three • I-465 around Indianapolis, Ibrothers for their hard work, which 94/Borman Expressway in northsecured the Ford test track con- west Indiana tract, which he says was a seminal • I-94 across Michigan; U.S.moment in the company’s history. 131 central Michigan, including “Through it we gained the the Constantine bypass expertise and experience that led • The Transportation Research

(L-R) are Bill, Lee, Blair and Albert Rieth.

Today, the company, which employs 1,600, performs more than 60 percent of its business on road and bridge projects for the Indiana and Michigan DOTs and public agencies.

Center in Liberty, Ohio • U.S.-31 expansion in western Michigan through central Indiana. “Many of the roads you drive in Indiana and Michigan have been touched by Rieth-Riley at some point,” said Rose. Rieth-Riley is currently working on the Indiana Department of Transportation’s $122.7 million State Street Redevelopment Project and is currently constructing the $200 million project for the Indiana Toll Road, reconstructing a road it helped build more than 60 years ago. “We are very fortunate to have such dedicated employees” said Brian Inniger, CFO of 20 years with Rieth-Riley. “We have been able to survive all these years because these employees believe in our culture of hard work and conservatism. In addition, we are a

group that will change with the times to stay current with a commitment to quality materials and workmanship. This culture starts at the top and permeates throughout the organization” Rieth-Riley has a large fleet of vehicles and equipment that is based at yards/maintenance facilities throughout the geographic locations. The fleet consists of more than 1,500 pieces of equipment ranging from cranes to pickup trucks, which is maintained by a staff of 28 mechanics, as well as assistance from its vendors. The equipment includes pieces from BearCat, Caterpillar, Deere, Etnyre, Gomaco, Gradall, Guntert & Zimmerman, Hamm, Kawasaki, Komatsu, Rosco, Trail King, Vogele, Volvo and Wirtgen, among others. see ANNIVERSARY page 92

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 33

Page 34 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT for Every Job Looking to Improve Productivity? We have solutions

Compact Track Loaders Best in class horsepower and exceptional lifting and dumping height

Demo one today! Call Today! 800-798-5438

Indianapolis | 317-872-4877 4951 West 96th St. | Indianapolis, IN 46268

Compact Excavators Increased productivity and up to 12% better fuel economy over prior models

Fort Wayne | 260-483-8868 3333 W. Coliseum Blvd. | Fort Wayne, IN 46808

Serving Ohio, Indiana, Kentucky and Michigan

www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ November 19, 2016 â€¢ Page 35

YOUR SOURCE FOR

SALES AND RENTALS CRAWLER TRUCKS, STUMP CUTTERS AND FORESTRY MULCHERS

BACKHOE LOADERS Deere 310SE, 1998, 9043 hrs, 3ZU VKLIW WUDQV [ w ENW H[W KRH WLUHV ...... $21,900 Deere 310SJ, 2008, 2927 hrs, &DE Z R DLU [ SZU VKLIW WUDQV H[W GLSSHU w EN .... $44,500 Deere 410E, 1998, 6895 hrs, Cab w/o air, 4.4 pwr shift trans, ext dipper, frnt cplr ..... $27,500 Deere 410E, 2000, 10050 hrs, [ ULGH FQWUO DX[ K\GU w ENW H[W KRH ............... $22,900 Deere 410G, 2001, 3758 hrs, Turbo, 4x4 pwr shift trans, aux hyd, ext. hoe, bkt ....... $34,900 Deere 410G, 2002, 5284 hrs, 7XUER [ SZU VKLIW WUDQV TFN FSOU w ENWV ............ $36,900 Deere 410G, 2005, 4622 hrs, AC, pilot cntrls, ext hoe, 4x4 pwr shift trans, qwk cplr ... $37,500 Deere 410K, 2014, 396 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext dipper............. $92,900 Deere 410K, 2015, 494 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext. dipper ..........$107,000 Case 590, 1993, 2883 hrs, $& /YU 7XUER [ SZU VKLIW H[W GLSSHU w ENW .......... $21,500

CRAWLER DOZERS/LOADERS Deere 455G, 1999, 3939 hrs, ROPS, loader bucket ................................... $15,500 Cat D6M XL, 2000, 7001 hrs 5236 H[WUD ORQJ WUDFN w SDGV ........................ $47,000 Cat D7H, 1990, 30593 hrs /YU 6WHHU /QJ 7UFN &RYWU 7UDQV w SDGV 6HPL-U Bld ..... $42,500 Deere 750C, 2002, 4953 hrs, AC, low grnd pressure, 34: pads, hydro trans & more .. $49,500

EXCAVATORS Deere 200C LC, 2005, 10166 hrs AC, lng arm; std boom; lng trck, aux hyd, cplr ... $57,500 Deere 290G LC, 2011, 2432 hrs $& FSOU DX[ K\U w ENWV ................. $172,900 Deere 350D, 2008, 8117 hrs AC, med lng arm, std boom, wide pads, bkts ............ $84,000 Deere 450DLC, 2006, 8529 hrs, AC, med-lng arm, wide pds, cntr wgt rmvl w/bkt .. $72,000 Hitachi ZX85USB-3, 2011, 2207 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w ENW . $77,500 .......... $104,000 Deere 350D, 2009, 6705 hrs ..... $94,000 Cat 324D, 2006, Hitachi ZX370, 2005, 12346 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w w ENWV . $62,900 Deere 350D, 2008, 6545 hrs, ..... $149,000 , ...... $54,900 Komatsu PC200LC, 2007 , .. $22,500 Komatsu PC400, 1990, .... $154,000 Volvo ECR145, 2014, 1296 hrs,

SKID STEERS Deere 326E, 2014, 108 hrs, AC, EH cntrls, joystick, 2 sp, self-leveling aux hyd ....... $34,900 Deere 328D, 2012, 631 hrs, AC, EH cntrls, air ride seat, 2 sp, self-leveling, ........... $34,500 Deere 323D, 2011, 1024 hrs, &DE Z $& IRRW FQWUOV VSG UXEEHU WUDFNV w ENW .... $29,500 Deere 328D, 2010, 854 hrs, Cab w/AC, foot controls, 2 spd, gen purpose bkt ........ $32,500 Deere 318D, 2012, 239 hrs, A/C,EH cntrls, BBT,gen purp bkt ......................... $27,900

WHEEL LOADERS 2014 JD 544Ks - 2 in stock, 985-1655 hours, starting @ $139,000 2015 JD 544Ks - 6 in stock, 300-500 hours, starting @ $145,000 (AC, Coupler, 3 yd bkts, some avail. w/3rd valve & Hi Lifts, municipal owned) Deere 544E, 1990, 9811 hrs, Cab w/o AC, 17.5 tires, gen purp bkt ................... $25,000 Deere 524K, 2013, 1593 hrs, AC, 3 spool; qk cplr, ride cntrl, high lift ............... $125,000 Deere 544J, 2005, 5040 hrs, ride cntrl, dual diff locks, 20.5 tires gen purp bkt ....... $75,900 Deere 644H, 1999, 16425 hrs, Cab w/o AC, frnt diff lock, 23.5 tires, gen purp bkt ... $59,900 Deere 744H, 1999, 4073 hrs, AC, ride cntrl, frnt diff lock, 26.5 tires, gen purp bkt .. $115,000

800.392.2686

Contact John Reinen (used equipment manager) at 608-220-1723 or Lewis at 608-837-5141 ext.1019

For Photos & Detail Descriptions visit: www.brookstractor.com Six Locations in Wisconsin to serve you - Sun Prairie z Milwaukee De Pere z West Salem z Plover z Mt. Pleasant (OPENING SOON)

Page 36 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Custom Made Products Co. Humboldt, IA Lease To Own

(800) 760-7871 Call Anytime

www.gncmp.com 100+ Scrapers on Hand at 16 Locations FOR SALE OR FOR RENT

www.macallistermachineryused.com

(317) 860-3311

We Will Not Be Undersold!

Indianapolis, IN

Zach Pritchett Matt Blosser zachpritchett@ macallister.com

mattblosser@ macallister.com

Locations: Humboldt, Bayard, De Soto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton, IA, Wayne, NE & La Plata, MO

John Toste

Bobby Saint

johntoste@ macallister.com

bobbysaint@ macallister.com

Recently Parted Machines

Most Parts and components available

Coming in for Parts

Looking for Attachments? Give us a call!

771, 773 New Surplus Beds Available

980G/H/K 7-8 Yd GP Buckets 3 Available

A sample of our available inventory Call/Email for pricing and pictures. Much more available! 320 & 323 buckets 24” 42” 48” 54” 420 backhoe rear buckets 12” 18” 24” 36” 420 front bucket and forks available 950-972 Fusion coupler bucket and forks 315/316 72’ ditch cleaning bucket – New D8T Multi-shank ripper 2 available Various excavator couplers/thumbs/buckets 725, 730, 730, 740 tailgates D6N multi-shank ripper 3 available

We purchase and trade attachments

14 yd Ashland I-140 XL2s (New & Used) Call

GRADERS

HOLCOMB

Art’s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call 8’-16’ With & Without Rear Steer

8 yd to 18 yd, (Dolly Wheel or Direct Mount - New & Used) ........Call

ASHLAND

CAT D400

*to mo

18 yd Ashland I-180 TS2s (Used) Call

18yd Ashland I-180 TS2s, (Used) ................................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (Used) ................................................Call Ashland I-130 XL2, (Used)............................................................Call Ashland I-140 TS2, (New) ............................................................Call 14yd Ashland I-140 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (Used) ................................................Call 11yd Ashland I-110 XL2s, (Used) ................................................Call 9 1/2yd Ashland I-950s, (New & Used) ........................................Call Ashland Groundhog GH2500, (New & Used) ................................Call

CAT 980H

elivery! Free Dst areas

GARFIELD 12yd Garfield Model 1150s, (Used)..............................................Call 13yd Garfield 1350s, (New & Used) ............................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

BIG DOG 8 yd Big Dogs, (New & Used) ......................................................Call 6 1/2 yd Big Dogs, (New & Used) ................................................Call 5 yd Big Dogs, (New & Used) ......................................................Call 12’ Feedlot Box Scrapers..............................................................Call 10’ Feedlot Box Scrapers..............................................................Call 12’ Box Scrapers ..........................................................................Call 10’ Box Scrapers ..........................................................................Call 8’ Box Scrapers ............................................................................Call

IRONWOLF 8-14 yd ..........................................................................................Call

LEON 10-13 1/2 yd ..................................................................................Call

ROWSE 7 yd Rowse Model 7002 & 7004 ..................................................Call 5 yd Rowse Model 7002 & 7004 ..................................................Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used) ............................Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

STOPS FUEL GELLING NEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wraps around the filter housing and reduces or eliminates the possibility of cold weather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternating current or a convertible model combining dc and ac. A standard 12V or 24V Universal Fuel Filter Preheater is priced at $138. The ‘peel & stick’ Universal Preheater attaches to the bottom or the side of the oil pan and converts the housing into a heat transfer element. It warms the oil without burning it making cold starts easy. It can be used on gearboxes, transmissions, transfer cases, water tanks and even bulk oil tanks. The Preheater plugs into any 120 or 240 volt outlet and consists of a thin silicone fiberglass pad containing a metal grid. To install it, you clean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone to seal the edges of the pad and place a flexible ceramic insulation pad over it. It is available in several models depending on the lube capacity. A 50 watt unit sells for $44 and a 350 watt unit sells for $133. BULK FUEL STORAGE FILTER HEATER The newest Diesel Fuel Filter Preheater fits 3.5" to 4" diameter by 7" to 10" tall filters. Stops diesel gelling in the filter so that fueling equipment can proceed even in the coldest temperatures. 120v with thermostat. $225.

PO Box 83, North Aurora, IL 60542-0083

800-530-5064 Local: 630-966-8992 Fax: 630-801-9569 sales@etipinc.com • www.etipinc.com universalpreheater.etipinc.com (Veteran Owned Small Business)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 37

WHY BUY REBUILT, WHEN YOU CAN BUY REMANUFACTURED TO ORIGINAL DEUTZ FACTORY STANDARDS. Q

We are so confident about the quality of DEUTZ Xchange engines that we offer a national three-year limited, fully transferrable warranty.

DEUTZ Xchange engines are assembled with 100% genuine DEUTZ replacement parts and undergo a 300-point reconditioning process, which includes all the latest engineering advancements.

DEUTZ Xchange provides a no-hassle core return policy, and speedy delivery.

DEUTZ Xchange engines are available for the following:

914 Series

1011/2011 Series

1015/2015 Series

912/913/914 Series

413/511/513 Series

1012/1013 Series

2.9/3.6 short & long blocks

2012/2013 Series

Your source for DEUTZ Xchange engines across the Midwest.

DEUTZ Power Center

Page 38 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GREAT HOLIDAY GIFTS! Caterpillar 963D Track Loader, 1:50 Scale - $75

Bucyrus Erie 22-B Dragline, 1:50 Scale - $275

Bantam C-35 Dragline, 1:25 Scale - $290

Caterpillar D4 Tractor with 4S Bulldozer, 1:16 Scale - $200

Liebherr HS855 HD Dragline, 1:50 Scale $325 Bucyrus Erie 22-B Cable Shovel, 1:50 Scale - $210

Bantam Truck Crane, 1:50 Scale - $150

Caterpillar 340D L Excavator, 1:50 Scale - $115

Grove GMK3055 Tri-Axle Mobile Crane, 1:50 Scale - $225

John Deere 470G LC Excavator, 1:50 Scale - $85

Caterpillar D9T Track-Type Tractor, 1:50 Scale - $125

Komatsu 275AX-5 Sigma Dozer, 1:50 Scale - $110

Case 580 Super N Backhoe/Loader, 1:50 Scale - $90

Volvo EC460 CL Excavator, 1:50 Scale - $190

Allis-Chalmers TS-300 Motor Scraper, 1:50 Scale - $110

Caterpillar D6R Track-Type Tractor, 1:50 Scale - $85

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 39

REMU PADDING BUCKET

PIPELINERS CHOICE ! Easy Easy to to use use Minimal Minimal maintenance maintenance Frame Frame that that lasts lasts Power Power transmission transmission you you can can trust trust

REMU USA Inc. +1 888 600 0018 I usa@remu.fi I www.remu.fi

Page 40 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New G Series Wheel Loaders Feature SCR Technology CASE from page 16

possibility of thermal events. As an aftertreatment system, there is no recirculation of gasses, no excessive exhaust temperatures related to burning off captured particulate matter and no downtime for regeneration. With the exception of adding diesel exhaust fluid (DEF), there are no new or intensive maintenance activities required of the system. This all results in a greater percentage of the machine’s power and fuel burn going to productive efforts, according to Case. Overall Quality of Operation The G Series wheel loaders feature the most intuitive, comfortable and easy to operate/manage environment of any Case wheel loader ever produced. Inspired heavily by automotive design, the new cab features the latest in electro-hydraulic controls, ergonomic design and operator interfaces that make operation simpler and more efficient. This includes a solid-state controller that provides software control over electrical power distribution and basic vehicle functions — all while eliminating fuses and relays, and significantly lowering the amount of wiring throughout the machine. A membrane keypad replaces a series of rocker switches for common machine functions, and a new steering console mimics the driver controls — from lights and wipers to turn signals — found in most cars/trucks, according to Case. “The G Series leverages ergonomics to improve operator comfort, combat operator fatigue and overall increases the operator’s efficiency and productivity and provides the intuitive practical technology that allows the operator to quickly climb in the cab understand all the benefits and resources at their disposal, ” said Dargatz.

An optional five-speed transmission with lock-up torque converter is available on this 721G as well as the 821G and 921G wheel loaders.

A new, one-piece rounded windshield, a rear grid defroster and redesigned external mirrors increase visibility to all sides of the machine. These loaders also feature an allnew HVAC system that achieves the fastcab cool-down, and excellent heating/defrosting/defogging capabilities. The operator environment is further accentuated with new automotive-style plastics on the inside that are more durable and resistant to scratches, and easier to clean. A new Bluetooth radio with full streaming, satellite radio (with optional equipment) and music device compatibility also is available to enhance the operator experience.

Total Cost of Ownership Every system in the new G Series wheel loaders is engineered together to help produce the greatest amount of production, at the highest rate of uptime, for the lowest total cost of operation. Much of this is achieved with the efficiencies of the engine and related systems, the intuitiveness of the operator environment and the ease of service, according to the manufacturer. “Maintenance is a key factor of the total equation. Over three years ago, Case led the way when they introduced ProCare,” said Dargatz. “ProCare is a comprehensive program that addresses maintenance, warranty

Guests play in the dirt and test the capabilities of this Case 921G wheel loader.

and telematics. It embodies our commitment to our customers to lower total cost of ownership.” ProCare includes a three-year Advanced Case SiteWatch telematics subscription, a three-year/3,000-hour full-machine factory warranty and a three-year/3,000-hour planned maintenance contract. For more information, visit www.CaseCE.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

The Case 521G wheel loader features a standard limited slip differential that equally supplies torque to each side of the axle and automatically applies additional torque to the gripping tire.

The 521G through the 921G wheel loaders, including this 621G, feature the Case-exclusive mid-mounted Case cooling module, which features coolers positioned in a cube design that ensures access to clean and cool ambient air, while also limiting debris buildup and providing easy access for routine cleaning.

Pages 41-45

Snow and Ice Section For more information on snow-clearing equipment and spreaders, visit CEG's Web site at www.constructionequipmentguide.com.

Bonnell’s Commander Series Bodies Feature Prism Shape “Commander” evokes visions of a leader, authority and control. A commander gives you the support you need with the reliability of a trusted friend. Additionally, integrity is a word that is often associated with Bonnell Industries Inc. Integrity in the time spent on its manufacturing process, integrity in the way the sales staff interacts with customers, and integrity in the longstanding relationships held with vendors and business partners, according to the company. Combine commander and integrity and these two concepts result in the Commander Series multi-purpose bodies exclusive to Bonnell Industries and its certified dealers. This design features a prism shape that tapers both toward the middle of the body and toward the back of the unit. The distinctive body design and heavy-duty conveyor chain or auger assembly allows for quick dispersal of materials without the need to raise the body. Joe Bonnell, president of Bonnell Industries, said, “The Bonnell Commander Series bodies have been engineered as a money-saving, game-changing municipal body. These units will allow your organization to run it as a salt truck in the winter months, and then convert easily to gravel, sand, dirt, etc. in the warmer months. The unique tailgate and spinner assembly were designed to give the truck operator maximum ease of use.” A multi-purpose dump body is able to complete a variety of tasks such as general hauling and dumping, spreading, and berming. Commander Series features include: • Prism-shaped body design efficiently unloads a variety of materials. • Body available in carbon steel, stainless steel or other materials upon request. Stainless steel bodies have all stainless steel tailgate hardware standard with grade 70 galvanized chain. • Standard 30.5-in. (77 cm) wide conveyor width utilizing 667xh pintle chain. Optional stainless chain and belt over chain or optional dual auger system. • Rear discharge center conveyor powered by motor/planetary gearbox combination. • Body sidewall shape provides ideal loca-

tion for optional pre-wet tank system, longitudinal to body. • Fully welded body compliant to AWS welding standards. • Zero to eight in. (20 cm) infinite rear screw jack gate opening.

• Twin pneumatic cylinders lock tailgate into position with over-center latches. • Reinforced long-sill and cross member design provides superior body strength. • Removable .25-in. (.6 cm) conveyor floor.

The Commander Series multi-purpose bodies feature a prism shape that tapers both toward the middle of the body and toward the back of the unit. The distinctive body design and heavy-duty conveyor chain or auger assembly allows for quick dispersal of materials without the need to raise the body.

• Grease manifolds help ensure that all critical lubrication points are serviced. • Double-acting trunnion hoist cylinder with nitride shaft. • 1.5-in. (3.8 cm) diameter tailgate pins on double acting, six-panel tailgate. • Manually adjusted conveyor chain takeup bearings. • Stainless steel subfloor protects truck chassis from contamination. “Municipalities benefit by running this multipurpose truck throughout the year, which translates to savings all year long. The integrity is in our name. Put your trust in Bonnell’s guaranteed quality and craftsmanship,” said Joe Bonnell. Today, Bonnell Industries is one of the leading truck equipment distributors in northern Illinois. Through a nationwide distributor network, it also is a major supplier of snowplows, spreaders, leaf vacuums and road maintenance equipment for municipalities throughout the country. Currently, Bonnell Industries is affiliated with numerous organizations within the industry such as the National Truck Equipment Association, American Public Works Association and Snow & Ice Management Association. Bonnell regularly attends product shows and seminars with these organizations to maintain their involvement in the industry. It also shares working relationships with multiple manufacturers within the industry holding valuable partnerships with the likes of the Knapheide, Western and Duraclass companies. Located in northern Illinois, just 90 mi. west of Chicago, its current establishment includes 61,000-sq. ft. of floor space. “We take great pride in the quality of products and services we offer to our customers. The dedication and loyalty of our employees is a major factor in our past success and will ultimately pave the way for continued growth and expansion in the future,” Bonnell said. For more information, call 815/284-3819 or visit www.bonnell.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 42 • November 19, 2016 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

IT’S A BLACK AND WHITE DECISION.

www.hlasnow.com

1.866.567.4162

Buyers Products…

SaltDogg MDS Combines Practicality, Convenience Buyers Products’s SaltDogg municipal dump spreader (MDS) provides the practicality of a dump body combined with the convenience of a spreader that allows for four-season operation, according to the manufacturer. The new MDS is offered in 10-, 12- and 14-ft. (3, 3.6 and 4.2 m) lengths with 36-in. (11 cm) sides and a 4-in. (10 cm) tailgate. The body is constructed from heavy-gauge, 304 stainless steel for corrosion resistance and durability. Its roll-formed

sides and cross-memberless design provide for increased material flow and strength-to-weight ratio. Designed with a three-stage, nitride, double-acting, front trunnion-mounted hoist, the MDS limits protrusion into the body cavity and allows for higher material capacity. Buyers’ proprietary spinner assembly is engineered to be its most advanced material distribution system to date, providing efficient, balanced and cost-saving operation, according to the manufacturer. Four-season use of the new MDS is

possible with a removable, 7-gauge stainless steel conveyor cover plate and an adjustable flow gate, which can be interchanged with a coal chute. The proprietary spinner assembly also is easily removed allowing year-round use of the spreader body. “The new municipal dump spreader is designed for superior durability and performance,” said Dave Zelis, director of sales and marketing at Buyers Products. “Along with fourseason operation, it also offers several industry-first features and customization for every application.” For more information, visit SnowDogg.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) The new MDS is offered in 10-, 12and 14-ft. (3, 3.6 and 4.2 m) lengths with 36-in. (11 cm) sides and a 4-in. (10 cm) tailgate. The body is constructed from heavy-gauge, 304 stainless steel for corrosion resistance and durability.

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • November 19, 2016 • Page 43

Page 44 • November 19, 2016 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide

Crysteel Truck Equipment 52248 Ember Rd. Lake Crystal, MN 56055 507-726-6041 800-722-0588 Fax: 507-726-2984 1130 73rd Ave. N.E. Fridley, MN 55432 763-571-1902 800-795-1280 www.crysteeltruck.com

Cannon Truck Equipment 51761 Danview Technology Court Shelby Twp., MI 48315 586-991-0054 Fax: 586-991-0074 www.cannonequip.com

Plow Truck Sale

1999 Freightliner FL80, Unit# 122464, Engine Caterpillar 3126B 275, Transmission MD3066P..................$42,000

2001 Sterling L7500, Unit# 498084, Engine Caterpillar 3126B 275, Transmission MD3560P........................................$41,900

2000 Sterling L8511, Unit# 497812, Engine Caterpillar 3126 250, Transmission MD3560P........................................$46,900

2000 GMC C8500, Unit# 500466, Engine Caterpillar 3126B 210, Transmission MD3060P........................................$17,500

2002 Sterling L8511, Unit# 517728, Engine Cummins 8.3L 285, Transmission MD3060P........................................$44,900

2003 Sterling LT9500, Unit# 500145, Engine Caterpillar C12 380, Transmission AutoShift ........................................$39,900

2000 Sterling L8511, Unit# 273187, Engine Caterpillar 3126 250, Transmission MD3560P........................................$46,900

2000 Sterling LT9511, Unit# 499459, Engine Cummins ISM 280, Transmission RTO14908LL ..................................$45,900

2000 Sterling L7500, Unit# 521942, Engine Caterpillar 3126B 300, Transmission MD3560P........................................$41,900

2008 Sterling LT9511, Unit# 310132, Engine Caterpillar C13 380, Transmission 4500RDS ........................................$75,000

11152 Courthouse Blvd Inver Grove Heights, MN 55077 651-455-9775 www.istatetruck.com

Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • November 19, 2016 • Page 45

PROFITABILITY

n e v i r D

TRUCK UTILITIES 2370 English St., St. Paul, MN 55109 651-484-3305 800-869-1075 2770 5th Ave S., Fargo, ND 58103 701-241-9411 800-972-9250 www.truckutilities.com

TRIP-EDGE

C-PLOWS

Torsion-Trip V-Plow TRIP-EDGE

No matter what the conditions, Hiniker professional grade snowplows are ready to help you reach new levels of productivity and performance!

SCOOP PLOWS

NORTH CENTRAL TRUCK & EQUIPMENT 2629 Clearwater Road St. Cloud, MN 56301 732 30th Avenue SE Minneapolis, MN 55414 877-485-9595 www.northcentralinc.com

V-PLOWS: Trip-edge designs give smooth operation and effective protection. Double acting cylinders provide positive moldboard position control.

FULL-TRIP

CONVENTIONAL PLOWS

C-PLOWS: Get the heavy-duty performance of the Hiniker trip-edge conventional plow plus the added versatility of a high performance backdrag plow. An amazing time-saver in driveways, parking lots and loading docks. SCOOP PLOWS: High capacity concave shape captures snow to efficiently clear large lots and parking areas. Angles left or right for conventional plowing. CONVENTIONAL PLOWS: 30 inch tall high-curvature blades roll deep snow off quickly and efficiently. Commercial plowers will appreciate the extra strength and efficient design.

TRIP-EDGE

CONVENTIONAL PLOWS

S.E. Minnesota’s Automotive Aftermarket Experts

TRUCKIN’ AMERICA 4720 Hwy. 52 N. Rochester, MN 55901 800-556-4720 507-285-9855 www.truckinamerica.com

SPREADERS: Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Long-lasting stainless steel construction. Choose between OHV gas engine or dual-motor electric hopper spreaders, or new stainless steel tailgate spreader models! TAILGATE SPREADERS Mankato, MN • 800-321-PLUS

HINIKER COMPANY 1-800-433-5620 s www.hiniker.com

TOPPERS & TRAILERS PLUS 1929 East Madison Ave. Mankato, MN 56001 507-387-7376 800-321-7587 www.toppersplus.com

Page 46 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Condolences…

Robert Geurink, Owner of HES Equipment, Passes Away at Age 55 Robert "Bob" Jay Geurink, age 55, died unexpectedly on Nov. 1, 2016. Born and raised in Holland, Mich., Mr. Geurink graduated from Hamilton High School where he met the love of his life, Anne Brower, to whom he was married for 33 years. Mr. Geurink was always a businessman. He formerly owned and operated Bussies Truck and Auto and then, with his late father, Arthur Geurink, started A&B Farms. As current owner and operator of HES/A&B Farms, Mr. Geurink ran the growing business with his three sons. Outside of work, Mr. Geurink enjoyed wrenching and tinkering on equipment, dune buggies and trucks. He loved a fast car, a powerful engine and anything loud. Mr. Geurink was very involved in local 4-H where he encouraged and supported 4-H kids in their projects. He shared his passion with his daughter, Aimee, who raised, showed and sold livestock as well. Mr. Geurink valued relationships and family and was an avid supporter of Winning at Home. He had a big heart for many local organizations including Wings of Mercy, where he previously served on the board. Mr. Geurink is survived by his loving wife, Anne; children and grandchildren, Andrew, Evie (Slagh) and Mason Geurink; Aaron, Kristen (De Young), Harvey and Axel Geurink; Aric, Dana (Jongekrijg) and Carson Geurink; and Aimee Geurink; Mother, Theresa Geurink; siblings, David and Lucy Geurink; Sandy and Joe Stasnek; Dan and Jodi Geurink; Janet and Mike Brown; Jeff and Laura Geurink; Mother-in-law, Marianne Brower; Bill and Kim Brower; Sue and Craig Brown; Sarah and Tony Wagner; Bobby and Beth Brower; several nieces, nephews, aunts, uncles and cousins. He was preceded in death by his father, Arthur Geurink, and father-in-law, Harvey Jay Brower. A funeral service was held Nov. 5 at Central Wesleyan Church in Holland, Mich. Interment was in East Saugatuck

Owner of HES Equipment Robert “Bob” Jay Geurink, age 55, died unexpectedly on Nov. 1, 2016.

Cemetery. Memorial contributions may be given to Winning at Home or Wings of Mercy. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Lincoln to See Hotel, Luxury Housing LINCOLN, Neb. (AP) Lincoln’s mayor and developers have announced a project that will include a 15- to 17story hotel and condominium complex linking downtown to the Haymarket. Officials announced plans for the Block 54 project, which also includes another hotel, event space, parking, a restaurant and bar. It is expected to cost $65 million to $70 million, according to the Lincoln Journal Star. In addition to the two hotels, the project will have around 40 to 50 upscale condominiums and penthouses. “There are several things I thought I’d never see,’’ Mayor Chris Beutler said. “An election of a black president, the Chicago Cubs winning the World

Series and a 15-story building on the corner of Ninth and O.’’ Construction is scheduled to start next spring and officials hope to open the building in early 2019. It’s expected to be the tallest structure built in Lincoln since the 1970s, and the third tallest building overall in the city. Developers expect to use tax increment financing for the project, and have considered using a site-specific sales tax. They added that the new condominiums would help the city, since the demand for downtown housing continues to not be met. In recent years, the largest portion of downtown housing has been aimed at the student market.

“People today want to work downtown. People today want to play downtown. And we are going to give people new options to live downtown,’’ said Clay Smith, Speedway Properties general partner. Smith added that people have already shown interest in purchasing condominiums in that building. The two hotels will each be aimed at different markets. Developers said the Holiday Inn Express will be tailored for family and business markets, while the boutique hotel will be more upscale. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677 Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461

www.brookstractor.com Sun Prairie, WI 608/837-5141 Milwaukee, WI 414/462-9790 De Pere, WI 920/336-5711 West Salem, WI 608/786-2644 Plover, WI 715-254-2777 Coming 2016 Mt. Pleasant, WI

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ November 19, 2016 â€˘ Page 47

YOUR INPUT. CARRIED THROUGH. Building your construction business together. Contractors like you asked for a simple compact loader that can maneuver in small spaces, is easy to operate, and can still handle big jobs. Meet the 204K and 304K Loaders from John Deere. Theyâ€™re just under eight feet tall and just over six feet wide, so you can do loading work on tight jobsites and inside buildings with FRQĆ&#x;GHQFH 7KDQNV WR LQWHOOLJHQWO\ SODFHG FRQWUROV RSHUDWLRQ LV VHFRQG QDWXUH 7KHVH ORDGHUV are â€œeasy in, easy outâ€? as well, with open operator stations standard. TTo o learn more, see your dealer or visit JohnDeere.com/loaders.

www.nortrax.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Monico, WI 715/487-5583 Mosinee, WI 715/693-3820 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

Page 48 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

Byron Center, MI New Hudson, MI Traverse City, MI Detroit, MI Flint, MI

616.878.7450 248.356.5200 231.943.3700 313.394.1811 810.744.4840

McALLISTER EQUIPMENT CO. Alsip, IL East Peoria, IL Rockford, IL Springfield, IL Villa Park, IL

708.389.7700 309.694.4455 815.227.0555 217.789.0351 630.530.7600

Burnsville, MN Proctor, MN Eau Claire, WI Mankato, MN Rochester, MN Roseville, MN Sauk Rapids, MN

800.552.1189 800.835.MACK 800.494.MACK 800.862.MACK 800.562.1505 800.704.0935 888.310.MACK

Evansville, IN Fort Wayne, IN Indianapolis, IN Corbin, KY Louisville, KY Prestonsburg, KY St. Louis, MO Cincinnati, OH Columbus, OH COMING SOON Cleveland, OH

812.867.6661 260.482.3681 317.247.9125 606.528.9440 502.456.4050 606.874.2104 314.487.8925 513.321.7833 614.636.4050

Butler, WI DeForest, WI DePere, WI Eau Claire, WI

262.781.3770 608.846.9600 920.336.3601 715.835.6133

216.393.7833

Some companies have you choose power or fuel efficiency. You chose both. Volvo developed the industry’s first fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus your attention on more important things — like growing your business. Get the details at volvoce.com/smartfuel.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 49

KY 859.485.8500 | FL 863.533.8900

Illinois Truck & Equipment

Highway Equipment Company

Newman Tractor

320 Briscoe Drive • Morris, IL 60450 815-941-1900 • Fax: 815-941-1486 www.iltruck.com

1405 Timken Place SW • Canton, OH 44706 330-915-8391 • Fax: 330-915-8411 www.highway-equipment.com

2841 Verona Road • Verona, KY 41092 859-485-8500 • Fax: 859-485-8573 www.newmantractor.com

Page 50 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ November 19, 2016 â€˘ Page 51

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661

HAYDEN-MURPHY EQUIPMENT COMPANY www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757 Fax: 952-884-2293

Link-BeltÂŽ Spin AceÂŽ ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HIÂżFLHQF\ \RXÂśYH come to expect from us - along with a minimum swing radius design for better maneuverability at sites where work space is at a premium. Thoughtful redesign of counterweights and boom placement makes them ideal for residential construction, utility work and specialty trenching jobs. Â‡ Roomy, redesigned cab Model # Operating Wt. Â‡ +LJK GHÂżQLWLRQ IXOO FRORU 75 X3 Spin Ace 17,400 lbs. ĆŽ /(' PRQLWRU 80 X3 Spin Ace OEV Â‡ Convenient ground-level 145 X3 Spin Ace 33,200 lbs. VHUYLFH DQG Ă€XLG FKHFNV 235 X3 Spin Ace OEV Â‡ Extended service intervals Â‡ 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV Â‡ 3-year subscription to RemoteCAREâ„˘ telematics

Net hp @ rpm

Tail Swing

54 hp @ 2,000 rpm 54 hp @ 2,000 rpm 100 hp @ 2,000 rpm KS # USP

Ć? ĆŽ Ć? ĆŽ Ć? ĆŽ Ć? ĆŽ

KELBE BROTHERS EQUIPMENT CO. www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262-781-4970 Fax: 262-781-9671 4621 Dutch Mill Rd. Madison, WI 53716 608-221-8300 3101 French Rd. De Pere, WI 54115 920-343-6496

$OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ Your Link-Belt Excavator dealer has the right Spin Ace for your application, along with uncompromising service and support to keep them performing at their best. *75 X3 and 80 X3 engines are Final Tier 4

Page 52 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wacker Neuson Machines Prove Ideal for MTA’s East Side Access Project LOGAN CONTRACTORS SUPPLY, INC. www.logancontractors.com Des Moines 4101 106th Street • Des Moines, Iowa 50322 515-253-9048 • Fax: 515-253-9491 Quad Cities 4114 State Street • Bettendorf, Iowa 52772 563-441-2949 • Fax: 563-441-2953 Kansas City 1325 S. Enterprise Drive • Olathe, Kansas 66061 913-768-1551 • Fax: 913-768-1171 Omaha 6544 L Street • Omaha, Nebraska 68117 402-339-3900 • Fax: 402-597-0694

ACCESS from page 24

too, according to operator Terrance McPartland. “My Wacker 550 loader has been in the tunnel its entire life and now has 5,400 hours on it. It has been put up to the challenge in every conceivable manner. It is a short machine with allwheel steering. It’s ideal for what we are doing. It’s still operating like a dream.” Vollmer added, “The Wacker Neuson machines have been used in some of the most severe operating conditions with zero catastrophic failures and we cannot say that about the other pieces of equipment that have been brought into the tunnel.” A Perfect Fit What made these Wacker Neuson machines ideal for Frontier-Kemper’s application was their width, height, capabilities and maneuverability. “[The Wacker Neuson 5055] has a very strong power to size ratio,” said Rick Stewart, an operator with Frontier-Kemper. “It’s compact, it’s powerful and it’s stable, allowing it to do some very heavy picks in some very tight circumstances.” Every piece of material — aggregate or otherwise — that is used in the tunnel has to be lowered down; in the case of the aggregate, typically in large bags. The bags must then be loaded onto train cars and transported by rail to the area where the materials will be used, and the stockpiling of material and debris further reduces the maneuver-

Jonah Yezzi (L), product solution specialist of Wacker Neuson, and Vincent Caporaso of CAP Equipment.

ability within the tunnel. “We would not be able to maneuver any machine on tracks up and down the tunnel and across the rail tracks,” Stewart said. “It is a very capable machine in this application. I’ve done a lot of excavating with this machine and the breakout force is very strong.” The Wacker Neusons are used to load each train car with the material that is transported through the tunnel and the same process applies in reverse. All of the material that is created and waste that is created by the excavation work — approximately 25 to 30 cu. yds. (19 to 23 cu m) of debris each day

Terrance McPartland is operating a Wacker 550 loader that has been in the tunnel its entire life and now has 5,400 hours on it.

In some areas, the floor of the old 1970s tunnel has to be milled and all of the debris loaded up by the Wacker Neuson machines and loaded on train rails.

— has to be loaded by the Wacker Neuson machines onto the train cars to be taken back up top. Everything comes in and out through the same entrance, according to Stewart. At the tunnel entrance, everything is loaded on and off the train cars via a crawler crane located on the surface. A Long Working Relationship Frontier-Kemper and CAP Equipment have a history that goes back a quarter of a century. “We have had a long-term working relationship with CAP Equipment that goes back nearly 25 years. FrontierKemper has been doing business with CAP Equipment since 1994. FrontierKemper Constructors Northeast Division manages heavy and underground construction projects in the New York geographical area and continuously has large public works projects of some sort going on in the city” Vollmer said. “As far as parts availability CAP Equipment has always had what we need readily available to keep going. Whenever we have equipment needs of any kind, whether it be Wacker Neuson or other machines, one phone call to CAP Equipment and our needs are met.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

BURRIS EQUIPMENT 2216 N. Greenbay Rd. • Waukegan, IL 60087 847-336-1205 • Fax: 847-336-2697 www.burrisequipment.com Ingleside, IL 815-363-4100 Joliet, IL 815-464-6650

FRANKLIN EQUIPMENT, LLC www.franklinequipmentllc.com Columbus Superstore 4141 Hamilton Square Boulevard • Groveport, OH 43125 614-228-2014 • 800-282-1438 Westerville 5755 Westerville Rd. • Westerville, OH 43081 614-948-3409 Indianapolis 1925 S. Kentucky Ave. • Indianapolis, IN 46221 317-686-0996 Dublin 7570 Fishel Drive South • Dublin, OH 43016 614-389-2161 Newcomerstown 6206 US Hwy 36 SW • Newcomerstown, OH 43832 740-492-0455 Milwaukee 11911 W. Silver Spring Road • Milwaukee, WI 53225 414-978-0915 • Fax: 414-978-0929

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 53

MUELLER IMPLEMENT, INC. www.muellerrental.com 4948 County Road YZ • Dodgeville, WI 53533 608-935-2751

INDY EQUIPMENT www.indyequipment.com 6500 Schaaf Rd. • Independence, OH 44131 216-446-3200 • Fax: 216-573-7712 11159 Royalton Rd. • North Royalton, OH 44133 440-237-9040 35350 Chester Rd. Avon, OH 44011 440-832-7133

BUCK & KNOBBY www.buckandknobby.com 6220 West Sterns Road • Ottawa Lake, MI 49267 Toll Free: 855-213-2825 • 734-856-2811

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 17000 Highway 41 N • Evansville, IN 47725 812-425-4491 7310 Venture Lane • Fort Wayne, IN 46818 260-489-4551 8410 Zionsville Road • Indianapolis, IN 46268-1524 317-872-8410 1801 Watterson Trail • Louisville, KY 40299 502-491-4000 1484 American Greeting Card Rd • Corbin, KY 40701-4813 606-528-3700 1389 Cahill Drive • Lexington, KY 40504-1167 859-259-3456 160 County Park Road • Paducah, KY 42001 270-444-8390

Page 54 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Southeastern Equipment Promotes Watton, Gourley to VEEP Positions Southeastern Equipment Co. Inc. is pleased to announce that Heath Watton and Mickey Gourley have both been promoted to the position of vice president. Watton and Gourley will be responsible for all of Southeastern Equipment Company locations, and will oversee daily operations, including sales, service, parts and customer relations. “I am looking forward to seeing the contributions that Heath and Mickey will make in their new roles,” said Charlie Patterson, president of Southeastern Equipment. “Both are veterans of the company and will be charged with enhancing and growing our equipment sales efforts as well as improving our product support capabilities. We look forward to their continued growth and leadership involvement with Southeastern.” Gourley joined Southeastern Equipment in 1998 as an outside salesman. He quickly moved into increasing levels of management and responsibility after demonstrating his commitment to the company’s customers and products. His most recent position was general manager. With 18 years experience in sales and customer service, he is uniquely positioned to provide leadership and continued growth. In 2003, Watton joined the company as a salesman at the Heath location where he was recognized for his knowledge of equipment manufacturing and his work ethic. Previously, he was Southeast Ohio regional manager. With more than 12 years of experience within the company, his promotion is

ever there was a project that exemplified the elements of a Keystone Award long before the award criteria was even developed, it is the Bagnell Dam. This construction project — virtually the only major construction project in the nation during the Great Depression — created the economic engine known to us as Lake of the Ozarks and continues to provide power for Missourians nearly 90 years later. Specialty Contractor Awards The AGC of Missouri also announced 12 Specialty Contractor of the Year (SCOTY) Awards to specialty contractors voted first place in their discipline by the general contractor members of the AGC. The General Contractor members were asked to consider a Specialty Contractor’s timeliness in regard to completion of project(s), ability to stay within budget and their overall experience with the specialty contractor. The 12 First Place

OHIO

Diamond Equipment 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396 Fax: 618-242-9161 www.diamondequipment.com

Highway Equipment Company www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411

INDIANA Martin Implement Sales, Inc. 18405 115th Avenue Orland Park, IL 60467 708-349-8430 Fax: 708-349-4230 420 Nolen Drive South Elgin, IL 60177 630-883-3320 Fax: 847-695-9105 26354 N US Highway 12 Wauconda, IL 60084 847-469-0120 Fax: 847-526-8054 www.martinimplement.com

Diamond Equipment 1060 Diamond Ave. Evansville, IN 47711 812-425-4428 dmfortune @diamondequipment.com www.diamondequipment.com 2000 Harlan Drive Terry Haute, IN 47802 812-299-4747 888-343-4747 Fax: 812-299-3687

Heath Watton (L) and Mickey Gourley.

timed to capitalize on his unique understanding of operations in order to expand the company’s reach. As part of their new responsibilities, Gourley and Watton will be visiting each location in the coming months to refine intracompany communications in order to provide continuity and coordination among all of the branches. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

AGC of Missouri Announces 12 SCOTY Awards for Specialty Contractors GALA from page 28

ILLINOIS

Specialty Contractor of the Year (SCOTY) award winners are: • D & S Fencing Co. Inc., ancillary services) • Vee-Jay Cement Contracting Co. Inc., concrete/paving • Drilling Service Company, earthwork and utilities • Guarantee Electrical Company, electrical • Spirtas Wrecking Company, environmental remediation and demolition • T. J. Wies Contracting Inc., interior and exterior finishes, openings and fixtures • Murphy Company, HVAC/piping • Grant Masonry Contracting Co. Inc., masonry • Fire Tech LLC, plumbing and fire protection • Waterhout Construction Inc., structural and finish carpentry • ACME Erectors Inc., structural and finish metals • Kirberg Company, thermal and moisture protection The specialty contractor receiving

the most votes by general contractors also was presented the Specialty Contractor of the Year award by the AGC of Missouri. This distinction was awarded to T. J. Wies Contracting Inc. “As the largest statewide construction trade association it’s really exciting for us to have the opportunity to highlight outstanding projects completed by our members here in Missouri and throughout the country. The SCOTY Awards provide our General Contractors the opportunity to honor our specialty contractors for their contributions to the success of a project,” said Leonard Toenjes, CAE, president of the AGC. “More than ever in today’s competitive and challenging construction environment, collaboration is the key to making a successful project happen.” For more information, visit www.agcmo.org (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

KENTUCKY Diamond Equipment 1046 Lovers Lane Bowling Green, KY 42103 270-781-1061 800-489-1061 Fax: 270-781-0907

Team Boone www.teamboone.net 150 Schuler Dr. Bardstown, KY 40004 502-348-7573 Fax: 502-348-4401

IOWA Rueter’s www.rueterco.com 1132 31st Ave. Council Bluffs, IA 51401 712-366-5221 Fax: 712-366-5228 Hwy 30 West Grand Junction, IA 50107 515-738-2571 Fax: 515-738-2343 Hwy 30 East Carroll, IA 51401 712-792-9294 Fax: 712-792-6808 2425 NE 126th Ave. Elkhart, IA 50073 515-367-3054

Hardings Heavy Equipment 109 W. Commercial Ave. Lowell, IN 46356 219-696-8911 www.hardingsinc.com info@hardingsinc.com

KANSAS The Victor L. Phillips Co. www.vlpco.com 3250 N. Hydraulic St. Witchita, KS 67219 316-838-3347 1305 SW 42nd St. Topeka, KS 66609 785-267-4345 2203 W. Jones Ave. Garden City, KS 67846 620-275-1996

NEBRASKA Rueter’s www.rueterco.com E. Hwy 275 Neligh, NE 68756 402-917-5604 Fax: 402-887-5638

WISCONSIN Yes Equipment & Services, Inc. www.yesequipment.com 11715 W. Silver Spring Road Milwaukee, WI 53225 414-263-9001 7001 Manufacturers Drive Madison, WI 53704 608-243-9253

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 55

HL900 SERIES WHEEL LOADERS

High Quality Outstanding Performance Proven Reliability

Packed with Value s s s s s s

Increased productivity and fuel economy Standard onboard weighing system accurate to +/- 1% Spacious, quiet cab with heated air-ride seat standard 7-inch interactive, touchscreen monitor for all major functions 3-year Hi-Mate remote management system 3-year full-machine warranty plus 5-year/10,000-hour structural guarantee

To learn more about the HL900 series wheel loaders, visit us at www.hceamericas.com MICHIGAN Midland Engine 622 Jefferson Ave. Midland, MI 48640 989-631-4608 www.midlandengine.com

Buck & Knobby Equipment Co., Inc. 6220 Sterns Rd. Ottawa Lake, MI 49267 MI: 734-856-2811 OH: 419-476-5293 Fax: 734-856-2709 www.buckandknobby.com

MISSOURI The Victor L. Phillips Co. www.vlpco.com 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290

5430 Missouri 43 Joplin, MO 64804 417-781-8222

6330 W. Highway 60 Brookline Station, MO 65619 417-887-2729

Page 56 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ November 19, 2016 â€¢ Page 57

A BIGGER TIPPING LOAD IS ONLY THE BEGINNING. With up to 75% more bucket breakout force than the leading competitor models â€” plus XS WR PRUH YLVLELOLW \ PRUH K\GUDXOLF Æ RZ PRUH RSHUDWLQJ FDSDFLW \ DQG PRUH KRUVHSRZHU WKDQ SUHYLRXV PRGHOV Å D QHZ * RU * 6NLG 6WHHU RU * RU * &RPSDFW 7UDFN /RDGHU LV VXUH WR PDNH \RXU ELJJHVW MREV ORRN D ORW PRUH PDQDJHDEOH /HDUQ PRUH DERXW KRZ WKHVH PDFKLQHV FDQ KHOS VKDSH XS \RXU RSHUDWLRQ Å FDOO XV WRGD\

www.erbequipment.com Fenton, MO 63026 Mt. Vernon, IL 62864 636/349-0200 618/244-6800 Cape Girardeau, MO Paducah, KY 63703 270/554-1131 573/334-0563 Owensboro, KY Foristell, MO 63348 270/684-2339 636/463-2500 Evansville, IN Cuba, MO 65453 812/473-0484 573/885-0500

www.lec1.com Ashland, KY 606/928-3477 Pikeville, KY 606/432-0321 Marietta, OH 740/373-5255 Cowen, WV 304/226-3299

Beaver, WV 304/255-1525 Elkins, WV 304/636-6421 Cross Lane, WV 304/204-1818

www.westsidetractorsales.com 1400 W. Ogden Ave Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 708/331-6362 Rockdale, IL 815/730-9011 Wauconda, IL 847/526-7700

Rockford, IL 815/961-3160 Bloomington, IN 812/333-9677 Indianapolis, IN 317/544-3411 South Bend, IN 574/232-1461 Lafayette, IN 765/447-6933

www.jdequipment.com London, OH 614/ 879-6620 Washington Court House, OH 740-335-2071 Lancaster, OH 740-653-6951 Marion, OH 740-389-5458

Wilmington, OH 937-486-5211 Hilliard, OH 614-527-8800 New Albany, OH 614-475-0707 Zanesville, OH 740-450-7446

www.brookstractor.com Sun Praire, WI 608/837-5141 Milwaukee, WI 414/462-9790 De Pere, WI 920/336-5711

West Salem, WI 608/786-2644 Plover, WI 715/254-2777 Coming 2016! Mt. Pleasant, WI

Page 58 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

FASB New Lease Accounting Rules By Ralph Petta PRESIDENT AND CEO, EQUIPMENT LEASING AND FINANCE ASSOCIATION

The new rules for lease accounting approved by the Financial Accounting Standards Board (FASB) are scheduled to take effect for financial periods starting after Dec. 15, 2018, for public companies and after Dec. 15, 2019, for private companies, with a modified application for any other financial period presented. While organizations may be aware of the pending changes, many are not up to speed in their progress in transitioning to the new accounting standard, known as Accounting Standards Codification Topic 842 (ASC 842). The new FASB standard will modify the accounting for all leases which are in effect during the transition period. This means that although the standard applies to financial periods starting after Dec. 15, 2018, it will require a restatement for the financial reporting of prior periods also. Who Will Be Impacted Lease accounting changes affect both lessee and lessor organizations. Many lessors also act in the capacity of a lessee and thus may have the need to have lessee-oriented lease accounting functionality in place. While lessee accounting will change much more so than lessor accounting, the analytical process that both lessees and lessors should go through may be similar. Additionally, many lessors that are subsidiaries of other companies, such as banks and manufacturers, may be called upon by their parent organizations to assist in analyzing their own leases where they are acting as a lessee. Lastly, agreements other than leases also will be examined since they may very well be construed to either contain a lease or to be a lease under ASC 842. Various surveys conducted after the new standard was approved showed that a majority of companies were only in the early stages of preparation to implement it. Another showed that less than 10 percent of companies have systems in place to comply with the new rules. Given that the new lease accounting rules may impact different parts of an organization, people will need to be engaged and policies, processes and procedures ramped up to meet the challenges. Accordingly, the Equipment Leasing and Finance Association has compiled some high level steps that both lessees and lessors may consider following in the transition to the new lease accounting standard. 1. Start NOW. Initial steps should

include budgeting time and resources to perform the work. This includes determining which resources will be sourced internally and which shall be outsourced. The time estimated to make the transition is up to a year domestically and up to 24 months for a global program. 2. Designate the project team. This team will oversee the transition process, establish timelines and be responsible for timely, effective project completion. The team should be comprised of representatives that lease equipment, administer leases or use information regarding leases. The team is likely to come from the finance/treasury, lease administration, IT, accounting and business units. Designate one owner for the equipment leasing program who is responsible for establishing uniform processes, policies and controls of leased equipment, and to act as executive sponsor. The team should also include individuals who understand or can identify the full scope of agreements that an entity may be involved with, not just those agreements described as leases. 3. Know the new rules. The project team as well as the wider organization should understand the new standard, including implementation deadlines, challenges and risks, and how functions within the organization must adapt to address them. Training and informational sessions should be arranged as necessary. 4. Build a detailed implementation plan. The team should develop and have in place an initial and an updated plan of the steps to be undertaken for the transition. These should identify deliverables and processes, including back scheduling from implementation deadlines to establish timelines. 5. Inventory all equipment leases, real estate leases and other agreements in a centralized, electronic repository. In addition to operating and capital/finance leases, there are other forms of existing agreements and contracts that may be construed to be leases that should also be identified. These can include multiple-element arrangements that combine services, software, hardware and/or financing, and contracts such as power purchase agreements and supply contracts. All should be fully documented and compiled into similar categories for more efficient management and analysis. This will help decide whether the organization should elect either of the two available practical expedients that must be applied consistently to all leases. This determination will apply not only to reporting existing leases and other agreements during the transition phase,

but also determine future accounting policy decisions. 6. Prepare a high level “if, then” type of analysis. In the transition phase, it is key to determine the effects of whether or not to implement either or both of the two specific practical expedients. If elected, a practical expedient must be applied to all leases and agreements. The first practical expedient can be called the “prior conclusions” practical expedient under which previous conclusions are respected while the new accounting is applied to those conclusions. So, if elected, an operating lease remains classified as an operating lease under ASC 842 but is nonetheless subject to being capitalized by the lessee. Further, a service contract such as certain energy agreements, remain classified as such and are not subject to ASC 842. The other practical expedient is the “hindsight application” practical expedient, which allows one to use hindsight of activity which occurred during the transaction period in the application of ASC 842. While simply electing both practical expedients may seem like a natural and relatively easy step to take, both lessors and lessees should examine their portfolios of leases and other agreements and determine the effect electing the practical expedients would have on the entity’s financial reporting. The if/then analysis can be conducted on a sample size of the various agreement categories identified in step 5. 7. Determine IT capabilities and requirements. Assess the organization’s existing IT structure and whether it can handle issues such as data extraction, information and document storage and the reporting requirements of the new standard. Lessees may be challenged in their ability to account for the capitalized lease liability as a loan for all of their existing leases and agreements. Leveraging IT tools and support will enable the organization to better manage the transition, as well as equip your organization for post-transition lease accounting. 8. Identify gaps in performance and capabilities. Assess existing lease accounting policies, procedures, and controls and perform a gap analysis to determine which require changes. Determine which options to follow to reach the desired future state of tracking and financial reporting for agreements subject to ASC 842. For more information on the new lease accounting standard, visit www.equipmentfinanceadvantage.org/ newLAR.cfm. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Sievers JCB

Fairchild JCB

406 Old Rt 66 Hamel, IL 62046 618-633-2622

15735 Central Avenue NE Ham Lake, MN 55304 763-434-3832

8080 State Rt 16 Hillsboro, IL 62049 217-532-3222

3100 Highway 13 West Burnsville, MN 55337 952-697-1720

State Route 267 South Greenfield, IL 62044 217-368-2486

2140 Hutson Road Green Bay, WI 54303 920-494-8726

14464 Shad Rd Carlinville, IL 62626 217-854-3191

2815 Mary Street Marinette, WI 54143 715-735-0402

1351 W Jackson St Auburn, IL 62615 217-438-6111 www.sieversjcb.com

5217 Heffron Court Stevens Point, WI 54481 715-341-6846 www.fairchildjcb.com

Rueter’s

General Equipment & Supplies, Inc.

1132 31st Ave Council Bluffs, IA 51401 712-366-5221 2425 NE 126th Ave Elkhart, IA 50073 515-367-3054 Hwy 30 West Grand Junction, IA 50107 515-738-2571 23296 Hwy 30 East Carroll, IA 51401 712-792-9294 E Highway 275 Neligh, NE 68756 402-917-5604 www.ruetersjcb.com

Sellers JCB 1645 S. West St. Wichita, KS 67213 316-943-9311 Fax: 316-943-8116 3030 S. W. 57th St. Topeka, KS 66609 785-862-0031 400 N. Chicago St. Salina, KS 67401 785-823-6378 395 N. Industrial Dr. Garden City, KS 67846 620-275-9621 www.sellersequipment.com

4300 Main Avenue Fargo, ND 58103 701-282-2662 Fax: 701-364-2190 905 20th Ave. SE Minot, ND 58701 701-582-0479 3500 Apple Creek Road Bismarck, ND 58504 701-223-9700 4082 2nd Ave. West Williston, ND 58801 701-572-0570 www.genequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 59

SSEIZZE THE SEIZE T WORKDA WORKDAY WORKD W DA AY Y Contact your local JCB dealer for details on zero percent financing and cash back offers!

Don’t just survive the workday—conquer it with power and performance found in our latest backhoes. In every respect – from digging to lifting and maneuvering – these machines will maximize your productivity. With a tier 4 f inal solution, 109 9 HP P, a top speed of 26 MPH and a loader bucket breakout force of 14,528 lbs, your job on the worksite justt got easierr.. T To o learn more visit JCBNA.com today.

/JCBNA JCBNA

JCB of St. Louis 7978 Veterans Pkwy. St. Peters, MO 63376 636-281-4450

CSTK JCB 400 Shawnee Avenue Kansas City, KS 66105 913-371-0868 www.cstkjcb.com

@JCBNA JCBNA www ww w.jcbna.com

MH JCB

Diesel Machinery Inc.

JCB of Chicago

11715 W Silver Spring Road Milwaukee, WI 53225 262-783-7510

106 Circle Freeway Dr, Cincinnati, OH 45246 513-681-2200

4301 N Cliff Ave, Sioux Falls, SD 57104 888-753-8907

1603 E Algonquin Rd Arlington Heights, IL 60005 847-437-8686

7001 Manufacturers Drive Madison, WI 53704 608-243-9253 www.buyjcb.com

3306 Gilmore Industrial Blvd, Louisville, KY 40213 502-962-6560

39288 133rd St, Aberdeen, SD 57401 888-484-6312

16754 New Ave Lemont, IL 60439 630-257-1261

5859 Raymond St, Indianapolis, IN 46241 317-240-6300 www.mhjcb.com

3801 N Deadwood Ave Rapid City, SD 57702 800-658-3047 www.dieselmachinery.com

1548 Huntwood Dr Cherry Valley, IL 61016 815-332-8222 www.jcbchicago.com

YES JCB

4245

Page 60 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

EXPERIENCE EX PERIENCE T THE HE D DIFFERENCE IFFERENCE Takeuchi offers Takeuchi offers the the m most ost iinnovative nnovative a and nd a advanced dvanced li line ne o off c compact ompac t e equipment q u i p m e nt o on n tthe he p planet. lanet. C Come ome a and nd ssee ee w what hat e everyone veryone e else lse iiss ttalking alking a about. bout. E Experience xperience T Ta Takeuchi akeuchi — Visit V isit your your local local dealer dealer ttoday. oday.

Alta Equipment Company

McCann Industries 543 S. Rohlwing Rd • Addison, IL 60101 630-627-0000 250 E. North Frontage Rd. • Bolingbrook, IL 60440 630-739-7770 2350 S. Laflin St. • Chicago, IL 60608 312-942-9200 4701 West 137th Street • Crestwood, IL 60445 708-597-3110 1133 Indianapolis Blvd. • Schererville, IN 46375 219-865-6545 1360 N. Rand Rd. • Wauconda, IL 60084 847-526-9444 4102 W. Crystal Lake Rd. • McHenry, IL 60050 815-385-0420 www.McCannOnline.com

Bobcat of St. Louis 401 West Outer Rd. Valley Park, MO 63088 636-225-2900 Fax: 636-225-4344 1885 West Terra Lane • O’Fallon, MO 636-240-9020 1101 N. Lenway Dr. • Columbia, MO 573-886-9435 9801 West State Route 161 Fairview Heights, IL 618-397-1847

5105 Loraine Street • Detroit, MI 48208 313-394-1811 56195 Pontiac Trail • New Hudson, MI 48165 248-356-5200 8840 Byron Commerce SW • Byron Center, MI 49315 616-878-7450 G 3283 S Dort Hwy. • Flint, MI 48529 810-744-4840 476 US 31 South • Traverse City, MI 49685 231-943-3700 www.altaequipment.com

www.bobcatofstl.com

Road Builders Machinery and Supply Co., Inc. Brandeis Machinery & Supply Company 17000 Highway 41 N Evansville, IN 47725 812-425-4491 7310 Venture Lane Fort Wayne, IN 46818 260-489-4551 8410 Zionsville Road Indianapolis, IN 46268-1524 317-872-8410 1801 Watterson Trail Louisville, KY 40299 502-491-4000 www.brandeismachinery.com

Victor L. Phillips Co. 4100 Gardner Ave. • Kansas City, MO 64120 800-878-9290 5430 S. Highway 43 • Joplin, MO 64804 800-878-8223 6330 W. Hwy 60 • Brookline Station, MO 65619 800-955-2729 3250 North Hydraulic • Wichita, KS 67219 800-878-3346 1305 SW 42 St. • Topeka, KS 66609 800-878-4345 2203 West Jones Ave. • Garden City, KS 67846 800-511-1435 www.vlpco.com

4115 S. 90th St. • Omaha, NE 68127 402-331-9200 Fax: 402-339-6620 5601 Fletcher Ave. • Lincoln, NE 68507 402-325-0447 Fax: 402-325-0753 4949 Juergen Rd. • Grand Island, NE 68801 308-384-2620 Fax: 308-384-0686 www.roadbuildersmachinery.com

Columbus Equipment Company 2329 Performance Way • Columbus, OH 43207 614-443-6541 12500 Williams Rd. • Perrysburg, OH 43551 419-872-7101 712 Shepherd Ave. • Cincinnati, OH 45215 513-771-3922 3942 Brecksville Rd. • Richfield, OH 44286 330-659-6681 290 Old Steubenville Pike • Cadiz, OH 43907 740-942-8871 7570 New Carlisle Pike • Dayton, OH 45424 937-879-3154 2200 Venture Circle SE • Massillon, OH 44646 330-833-2420 818 Lee St. • Zanesville, OH 43701 740-455-4036 864 Richmond Rd. • Painesville, OH 44077 440-352-0452 3668 US Route 23 South • Piketon, OH 45661 740-289-3757 www.columbusequipment.com

Midwest Underground Supply 1106 32nd St. SW Bondurant, IA 50035 877-967-5656 27285 Ironworks Ave. Harrisburg, SD 57032 605-368-9880 www.midwestundergroundsupply.com

Diamond Equipment Inc. 1060 Diamond Avenue • Evansville, IN 47711 800-258-4428 • 812-425-4428 • Fax: 812-421-1036 1046 Lovers Lane • Bowling Green, KY 42103 800-489-1061 • 270-781-1061 • Fax: 270-781-0907 17035 North IL Hwy 37 • Mt. Vernon, IL 62864 800-388-6396 • 618-242-2273 • Fax: 618-242-9161 2000 Harlan Drive • Terre Haute, IN 47802 888-343-4747 • 812-299-4747 • Fax: 812-299-3687 www.diamondequipment.com

Kelbe Brothers Equipment Co. 12770 W. Silver Spring Drive • Butler, WI 53007 262-781-4970 • Fax: 262-781-9671 4621 Dutch Mill Rd. • Madison, WI 53716 608-221-8300 3101 French Rd. • De Pere, WI 54115 920-343-6496 www.kelbebros.com

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 61

Tough, Powerful, Dependable Takeuchi offers a wide range of excavators, track loaders, skid steer loaders and wheel loaders. PUT A TAKEUCHI TO WORK ON YOUR JOBSITE AND EXPERIENCE THE DIFFERENCE!

Star Equipment Ltd. 1401 2nd Avenue • Des Moines, IA 50314 515-283-2215 • 800-369-2215 Fax 515-283-0295 2625 W. Airline Hwy. • Waterloo, IA 50703 319-236-6830 • 800-791-9249 Fax 319-236-6834 2950 6th Street SW • Cedar Rapids, IA 52404 319-365-5139 • 800-728-5139 Fax 319-365-6726 2100 E. Lincoln Way • Ames, IA 50010 515-233-9500 • 866-856-2312 Fax: 515-233-9505 www.starequip.com

Those in the know, know Takeuchi

Luby Equipment Services

Wilson Equipment Company

2300 Cassens Drive • Fenton, MO 63026 636-343-9970 199 Airport Road • Cape Girardeau, MO 63702 573-334-9937 8853 Petroff Drive • Caseyville, IL 62232 618-397-9971 4375 Camp Butler Road Springfield, IL 62707 217-744-2233 2625 North 24th St. • Quincy, IL 62305 217-222-5454 www.lubyequipment.com

2180 Old Frankfort Pike • Lexington, KY 40510 859-254-6443 800-432-0913 Fax: 859-254-9099 828 W. Cumberland Gap Pkwy • Corbin, KY 40701 606-528-0700 800-274-9457 Fax: 606-528-2329 2124 Watergap Road • Prestonsburg, KY 41653 606-874-8036 • 800-955-9457 Fax: 606-874-0013 www.wilsonequipment.com

< Find out what others know, visit takeuchi-us.com for more info >

Page 62 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Crews in Ky. Work to Complete Modern, Four-Lane Bridge BRIDGE from page 1

km) of U.S. 68/KY 80 from two lanes to four lanes from just west of Lake Barkley to just east of the lake. In the Kentucky Lake region, approximately 2 mi. (3.2 km) of U.S. 68/KY 80 needed to be widened from two lanes to four lanes from Aurora, in Marshall County on the western shore, to just east of Kentucky Lake, where the project connects to the four-lane roadway that runs through Land Between The Lakes. Jim Smith Contracting was awarded a contract in 2014 to construct causeways and also a new bridge over a lagoon on the west side of Kentucky Lake, just north of U.S. 68/KY 80 and adjacent to the Kenlake State Resort Park campground. The lagoon bridge forms an approach to the main lake bridge. Construction of the main bridge was performed under a separate contract by Johnson Brothers Corp. The new Kentucky Lake bridge is already completed. For the Lake Barkley replacement bridge, crews are setting the first span of structural steel for the approach superstructure and erecting a basket handle tied arch on barges. It will be floated into position on the main span substructure in January 2017. “The foundations are the biggest challenge,” said Chavez. “The varying rock and soil conditions along the alignment of the new bridge make it difficult to determine what equipment is necessary to install the drilled shaft. We have two different kinds of drills on site, to attack the varying depths of rock sockets and to handle most conditions we encounter.” Kentucky Transportation Cabinet crews performed all the preparatory work for the replacement bridge prior to letting the project. PTL workers are currently in the planning stages of demolition, which will take

PCL Civil Constructors photo

Jim Smith Contracting was awarded a contract in 2014 to construct causeways and also a new bridge over a lagoon on the west side of Kentucky Lake, just north of U.S. 68/KY 80 and adjacent to the Kenlake State Resort Park campground.

place at the end of 2017. “We have completed the east approach foundations, abutments and the west and east approach roadways,” said Chavez, who added that erection of the steel girders for the approach bridge spans has yet to be carried out. Crews are looking to an intermediate milestone of switching two lanes of traffic to the new bridge by March 13, 2018. So far, workers have moved approximately 80,000 cu. yds. (61,164 cu m) of material. After demolition of the existing bridge, an additional 65,000 cu. yds. (49,696 cu m) must be addressed. Equipment on site has included cranemounted drill attachments and reverse circulatory drills for installation of the drilled shafts. A vibratory hammer also is being used to install the temporary casings. The casings range from 96 to 120 in. (243 to

304.8 cm) diameter, and from 40 to 120 ft. (12 to 36 m) in length. Manitowoc 888, 999 and 2250 cranes also are required during construction. Main materials being used on the bridge project include structural steel, concrete, asphalt and reinforcing steel. In January 2016, Lake Barkley reached near record high water elevation. This forced crews to move equipment off the trestles, until the water receded. Winter weather also is a concern moving forward. Chavez said the most time-consuming part of the work, is managing the six different headings on the project. “We access all the work from our trestle, and with three cranes on the trestle, coordination becomes key to the success of the different headings.” The new bridge features a basket handle

arch design, which allows for the 550-ft. (167 m) span. “The Cumberland River is heavily traveled by tug boats pushing flotillas of various commerce,” Chavez said. “We are building the arch on barges, then we will raise the arch 65 feet and float it into the main navigation channel, setting it on the main span piers.” The approach substructure footings are 12 by 65 by 8-ft. (3.6 by 19.8 by 2.4 m) deep, with three each 6-ft. (1.8 m) diameter columns and pier cap. The main span substructure footings are 30 by 135 by 12-ft. (9.1 by 41 m) deep, with 12-ft. diameter columns and strut. The structural steel for the approach consists of 8.5-ft. (2.5 m) tall plate girders. The basket handle tied arch consists of 2,500-tons (2,267 t) of structural see BRIDGE page 84

Kentucky Transportation Cabinet photo

In the Lake Barkley area, the project will widen approximately 1.5 mi. (2.4 km) of U.S. 68/KY 80 from two lanes to four lanes from just west of Lake Barkley to just east of the lake.

So far, workers have moved approximately 80,000 cu. yds. (61,164 cu m) of material.

Page 64 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

Need a Lift? There’s a Trailer to Fit Your Needs Moving a heavy object or piece of equipment from one place to another involves transporting that object in some manner, whether it be human strength, animal power or in most instances — trailers. There are as many types of trailers available as there are jobs that need items hauled. Some examples are: • Flatbed — this versatile trailer is among the most common trailers used and is exactly how it sounds — a flat trailer, which can be loaded from any angle; • RGN (Removable Gooseneck, Lowboy) — also

known as a “lowboy” or “double drop deck,” this trailer is most commonly used for moving heavy equipment. This type of trailer features a detachable deck that allows the front of the trailer to become a ramp. The RGN often transports oversized loads because its various configurations allow it to accommodate large loads; • Step Deck — also known as drop deck this is much like a flatbed trailer. The main use for this type of trailer is the ability to carry freight that is above the legal height limit. Another feature of step deck trailers is a ramp, allow-

P.J.L Laurens photo

A lowboy hauls an excavator.

Felling Trailers photo

Felling’s Sauk Center Welding shop in the late 1980s.

An advertisement for Martin semi-trailers.

ing equipment to be driven on and off the vehicle; • Stretch Trailer — the flatbed stretch and RGN stretch trailers allow extra-long loads to be transported, such as lumber, beams, pipes or any other freight too long for a standard flatbed; • Double Drop Trailer — this trailer features an upper deck in the front and a deck in the rear. The middle of the trailer also is known as a well. This allows the deck to be extremely low, allowing for the transport of legal loads up to 12 ft. (3.66 m) tall. These trailers are often used to haul heavy equipment; • Specialized Trailers — this type of trailer is designed for specific equipment or loads that are above standard weight, height or other requirements; and • Side Kit Flatbed — a side kit is a flatbed with removable sides. This type of trailer is often used in the steel industry and other industries where cranes are needed for loading and offloading. Many manufacturers offer a wide variety of trailers and can even customize them to a customer’s specific hauling needs. These companies have a rich history of providing the equipment needed to make the transport easier for their clients. Bri-Mar Manufacturing Bri-Mar Manufacturing was founded in 1995 in Chambersburg, Pa. The company offers hydraulic dump, equipment, utility and tilt trailers. In 2013, Bri-Mar became part of BWise Manufacturing LLC.

Currently, all Bri-Mar and BWise trailers are built in the same 300,000-sq.-ft. Pennsylvania facility. For more information, call 717/261-0922 or visit bri-mar.com. Eager Beaver Trailers Since 1946, Eager Beaver Trailers has been manufacturing construction equipment trailers from 5- to 100-ton (4.5 to 90.7 t) capacities. The company’s manufacturing facility is located in Lake Wales, Fla., with its parts and sales headquarters in Mickelton, N.J. Eager Beaver offers easy loaders, lowboys and oilfield lowboys to transport equipment for various industries. According to the company, they provide engineering and sales support to custom design a trailer that is best for the customer. For more information, call 800/257-8163 or visit eagerbeavertrailers.com. Felling Trailers In 1954, Sauk Centre Welding was in the business of doing small welding jobs for local farmers out of its small shop in Sauk Centre, Minn. In 1974, Merle J. Felling, a Sauk Centre Welding employee purchased the business from the original owner. Felling saw the lack of quality in the trailers his shop worked on and began making custom trailers for a few of his customers. As word spread of the craftsmanship of his trailers, Felling launched the first line in 1975. Today, Felling offers more than 220 models of trailers with thousands of options. The company

provides custom and standard trailers for the commercial transport, construction, public utility industries. It also works with the military, local and state government to meet their trailer needs. The company opened its second facility in Litchfield, Minn., in 2012 bringing its total office/production space to 250,000 sq. ft. For more information, call 888/335-5464 or visit felling.com. Fontaine HeavyHaul/Fontaine Commercial Trailer Fontaine Commercial Trailer was founded in 1940. The company is a Marmon Highway Technologies/Berkshire Hathaway Company with Fontaine HeavyHaul as its business unit. The company is located in Alabama, with various facilities in Springville, Haleyville and Jasper. It offers flatbed, dropdeck, platform, intermodal, heavy haul and military trailers as well as various floor technologies. For more information, cal1 800/821-6535 or visit fontainetrailer.com. Interstate Trailers Interstate Trailers is located in Mansfield, Texas. The company offers more than 35 models of trailers. The company was founded in 1982 and continues to serve customers by matching their industry needs with the equipment to fit their specifications. The company offerings include tagalongs, tiltbeds, gooseneck and lowboy trailers for various hauling see HISTORY page 70

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 65

Come Join Us! Con Expo - Con/AGG • March 7-11, 2017 Gold Lot - Booth G4316

Page 66 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

ROGERS BROTHERS

FELLING Mfg/ Model FT-10 CL FT-12 CL FT-6 CL FT-10 (E,I,L,P) FT-10WD FT-12 (E,I,L,P,XP) FT-12WD FT-14 (E,I,L,P,XP) FT-14WD FT-15 (I,E) FT-16 (I,E,XP) FT-16WD FT-20 (I,E,XP) FT-24 (I,XP) FT-20-3WD FT-24-3 (E) FT-3 FT-5 FT-10 IT I / E FT-10 T PAN TILT FT-12 IT I /E FT-12 T PAN TILT FT-14 IT I / E FT-14 T PAN TILT FT-15 IT-I FT-16 IT I / E FT-16 T PAN TILT FT-20 IT-I FT-3 T PAN TILT FT-6 T PAN TILT FT-7 T-1 PAN TILT FT-10-2 FT-12-2 FT-14-2 FT-16-2 FT-18-2 FT-18-3 FT-20-2 / LP FT-20-3 FT-24-2 / LP FT-24-3

Weight Cap. lbs. (kg) 7,480 (3,393) 12,000 (5,443) 5,100 (2,313) 7,480 (3,393) 7,380 (3,348) 12,000 (5,443) 12,000 (5,443) 14,000 (6,350) 14,000 (6,350) 14,400 (6,532) 16,000 (7,257) 16,000 (7,257) 20,000 (9,072) 21,800 (9,888) 20,000 (9,072) 24,000 (10,886) 1,800 (816) 4,900 (2,223) 7,380 (3,348) 7,380 (3,348) 12,000 (5,443) 12,000 (5,443) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 16,000 (7,257) 16,000 (7,257) 20,000 (9,072) 1,800 (816) 5,350 (2,427) 6,400 (2,903) 6,180 (2,803) 12,000 (5,443) 14,000 (6,350) 16,000 (7,257) 18,000 (8,165) 18,000 (8,165) 20,000 (9,072) 20,000 (9,072) 24,000 (10,886) 24,000 (10,886)

Equip. Weight Empty lbs. (kg) 2,500 (1,134) 2,700 (1,225) 1,900 (862) 2,500 (1,134) 2,600 (1,179) 2,700 (1,225) 2,800 (1,270) 3,200 (1,452) 3,200 (1,452) 3,500 (1,588) 3,600 (1,633) 3,700 (1,678) 4,000 (1,814) 4,100 (1,860) 5,900 (2,676) 4,000 (1,814) 1,100 (499) 1,200 (544) 2,600 (1,179) 2,600 (1,179) 3,200 (1,452) 3,200 (1,452) 3,450 (1,565) 3,450 (1,565) 3,600 (1,633) 3,600 (1,633) 3,600 (1,633) 3,800 (1,724) 1,100 (499) 1,650 (748) 1,800 (816) 3,800 (1,724) 4,900 (2,222) 5,200 (2,359) 5,800 (2,631) 5,800 (2,631) 5,800 (2,631) 5,900 (2,676) 5,900 (2,676) 6,600 (2,994) 6,100 (2,767)

Deck Size ft. (m) 14 (4.3) 14 (4.3) 10 (3) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 18 (5.5) 18 (5.5) 16 (4.9) 20 (6.1) 20 (6.1) 18 (5.5) 20 (6.1) 10 (3) 12 (3.7) 16 (4.9) 12 (3.7) 16 (4.9) 14 (4.3) 16 (4.9) 14 (4.3) 16 16 (4.9) 16 (4.9) 20 10 (3) 12 (3.7) 14 (4.3) 16+5 18+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5 20+5

Mfg/ Model

Weight Cap. lbs. (kg)

Equip. Weight Empty lbs. (kg)

Deck Size ft. (m)

TAG20L TAG20XXL TAG21L TAG21XXL TAG25XXL TAG25XXL-AL TVT25 MH25 TVT35 MH35 CY35PL SP35PL CR35PL-RS CR35GR CR40PL CR40PL-R3 CY50PL CR50PL CY50GR CR50GR CR55PL SP55PL SP55GR SP55DS CR60PL

40,000 (18,144) 40,000 (18,144) 42,000 (19,051) 42,000 (19,051) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431)

8,125 (3,685) 8,810 (3,996) 8,250 (3,742) 8,910 (4,042) 10,880 (4,935) 10,800 (4,899) 10,630 (4,822) 12,490 (5,665) 12,500 (5,670) 14,700 (6,668) 14,400 (6,532) 15,700 (7,121) 17,700 (8,029) 18,300 (8,301) 14,750 (6,691) 17,210 (7,806) 19,020 (8,627) 23,300 (10,569) 22,400 (10,160) 24,290 (11,018) 24,200 (10,977) 21,070 (9,557) 26,400 (11,975) 27,100 (12,292) 28,740 (13,039)

19x8.5 (5.8x2.6) 22x8.5 (6.7x2.6) 19x8.5 (5.8x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 18x8.5 (5.5x2.6) 22x8.5 (6.7x2.6) 20x8.5 (6.1x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 22x8.5 (6.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 26x8.5 (7.9x2.6) 25x8.5 (7.6x2.6)

Mfg/ Model FT-30-2 / LP FT-30-3 FT-36-3 / LP FT-40-2 / LP FT-45-2 / LP FT-45-3 / LP FT-50-3 / LP FT-60-3 LP FT-60-4 LP FT-14-2T (TILT) FT-16-2T (TILT) FT-18-2T (TILT FT-20-2T (TILT) FT-24-2T (TILT) FT-30-2T (TILT) FT-40-2T (TILT) FT-50-3T (TILT) T) FT-20-2 TA (AIR TIL T) FT-24-2 TA (AIR TIL) FT-30-2 TA (Air Tilt) FT-40-2TA (Air Tilt ) FT-50-3TA (Air Tilt FT-6DT (Dump) FT-10DT (Dump) p) FT-12-2 DT (Dum p) FT-12DT HD (Dum p) FT-14-2 DT (Dum p) FT-14DT HD (Dum p) FT-16-2 DT (Dum p) FT-16DT HD (Dum p) FT-20-2 DT (Dum p) FT-24-2 DT (Dum p) FT-30-2 DT (Dum mp) FT-12E SD(Side Du mp) Du FT-14E SD(Side mp) FT-16E SD(Side Dutor) FT-3GEN (Genera tor) FT-6GEN (Genera tor) FT-10GEN (Genera tor) FT-12GEN (Genera tor) FT-14GEN (Genera

Weight Cap. lbs. (kg) 30,000 (13,608) 29,700 (13,472) 36,000 (16,329) 36,320 (16,474) 45,000 (20,412) 45,000 (20,412) 50,000 (22,680) 60,000 (27,216) 60,000 (27,216) 14,000 (6,350) 16,000 (7,257) 18,000 (8,165) 19,500 (8,845) 24,000 (10,886) 30,000 (13,608) 36,320 (16,475) 50,000 (22,680) 19,700 (8,936) 24,000 (10,886) 30,000 (13,608) 36,320 (16,475) 50,000 (22,680) 4,500 (2,041) 7,000 (3,175) 12,000 (5,443) 12,000 (5,443) 14,000 (6,350) 14,000 (6,350) 16,000 (7,257) 16,000 (7,257) 20,000 (9,072) 24,000 (10,886) 30,000 (13,608) 12,000 (5,443) 14,000 (6,350) 16,000 (7,257) 3,500 (1,588) 5,700 (2,585) 7,480 (3,393) 12,000 (5,443) 14,000 (6,350)

Equip. Weight Empty lbs. (kg) 8,200 (3,719) 7,600 (3,447) 7,800 (3,538) 8,800 (3,992) 8,900 (4,037) 9,900 (4,491) 10,700 (4,853) 11,400 (5,171) 11,400 (5,171) 5,400 (2,450) 5,600 (2,540) 5,700 (2,585) 6,400 (2,903) 7,300 (3,311) 8,300 (3,765) 9,200 (4,173) 11,200 (5,080) 6,200 (2,812) 7,300 (3,311) 8,000 (3,629) 9,200 (4,173) 11,200 (5,080) 2,500 (1,134) 2,980 (1,352) 4,000 (1,814) 3,900 (1,769) 4,400 (1,996) 4,200 (1,905) 5,300 (2,404) 4,800 (2,177) 5,900 (2,676) 7,400 (3,357) 8,000 (3,629) 3,500 (1,588) 4,000 (1,814) 4,000 (1,814) 1,000 (454) 1,300 (590) 2,500 (1,134) 2,900 (1,315) 3,000 (1,361)

Deck Size ft. (m) 20+5 20+5 20+5 20+5 20+5 24+5 24+5 24+6 28+5 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24+6 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 30 (9.1) 8 (2.4) 10 (3) 12 (3.7) 12 (3.7) 12 (3.7) 12 (3.7) 14 (4.3) 12 (3.7) 14 (4.3) 14 (4.3) 14 (4.3) 14+5 14+5 18+5 6 (1.8) 8 (2.4) 12 (3.7) 12 (3.7) 12 (3.7)

No. of Axles 2 2 2 2 3 3 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 67

see CHART page 68

FELLING CONTINUED... Mfg/ Model FT-16GEN (Generator) FT-20-2E GEN (Generator) FT-3 Coil FT-6 Coil FT-7-1 PT (Pole) FT-8-1 PT (Pole) FT-10-1 PT (Pole) FT-12-1 PT (Pole) FT-14 PT (Pole) FT-15 PT (Pole) FT-20-1 PT (Pole) FT-20-2 TPT (Pole) FT-24-2 TPT (Pole) FT-70-2 TPT (Pole) FT-12-2 PT-C (Pole/Cargo) FT-14-2 PT-C (Pole/Cargo) FT-16-2 PT-C (Pole/Cargo) FT-3R FT-6 R (Reel) FT-8R (Reel) FT-10R (Reel) FT-14-2R (Reel) FT-50-2MX (Semi) FT-70-2MX (Semi) FT-80-2MX (Semi) FT-80-3MX (Semi) FT-100-3MX (Semi) FT-100-4MX (Semi) FT-70-2 NN-HX (Semi) FT-70-2 NN-LX (Semi) FT-80-3 NN-HX (SEMI) FT-80-3 NN-LX (SEMI) FT-100-3 NN-HX (SEMI) FT-100-3 NN-LX (SEMI) FT-70-2 PH-HT (Semi) FT-70-2 PL-HT (Semi) FT-80-2 PH-HT (Semi) FT-80-2 PL-HT (Semi) FT-80-3 PH-HT (SEMI) FT-80-3 PL-HT (SEMI) FT-100-3 PH-HT (Semi) FT-100-3 PL-HT (Semi) FT-70-2 HX (Semi) FT-80-2 HX (Semi) FT-80-3 HX (Semi) FT-100-3 HX (Semi) FT-70-2 OTR-L (Semi) FT-80-2 OTR-L (Semi) FT-80-3 OTR-L (Semi) FT-70-2 OTR-H (Semi0 FT-80-2 OTR-H (Semi) FT-80-3 OTR-H (Semi) FT-24S (Sprayer) FT-30S (Sprayer) FT-40S (Sprayer) FT-12-2 TT (Tender) FT-14-2 TT (Tender) FT-16-2 TT (Tender) FT-18-2 TT (Tender) FT-20-2 TT (Tender) FT-24-2 TT (Tender) FT-30-2 TT (Tender) FT-40-2 TT (Tender) FT-45-2 TT (Tender) FT-45-3 TT (Tender) FT-50-2 (SD) TT (Tender) FT-70-2 (SD) TT (Tender) FT-75-2 (SD) TT (Tender) FT-80-3 (SD) TT (Tender) FT-100-4 (SD) TT (Tender)

Weight Cap. lbs. (kg) 16,000 (7,257) 20,000 (9,072) 1,800 (816) 6,000 (2,721) 4,200 (1,905) 5,000 (2,268) 5,380 (2,440) 12,000 (5,443) 14,000 (6,350) 15,000 (6,804) 18,160 (8,237) 20,000 (9,072) 24,000 (10,886) 70,000 (31,752) 12,000 (5,443) 14,000 (6,350) 16,000 (7,257) 1,890 (857) 5,080 (2,304) 7,200 (3,266) 10,000 (4,536) 14,000 (6,350) 50,000 (22,680) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 70,000 (31,752) 79,700 (36,151) 80,000 (36,287) 100,000 (45,359) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 24,000 (10,886) 36,320 (16,474) 36,320 (16,474) 14,000 (6,350) 14,000 (6,350) 16,000 (7,257) 18,000 (8,165) 20,000 (9,072) 24,000 (10,886) 30,000 (13,608) 36,320 (16,474) 45,000 (20,411) 45,000 (20,411) 50,000 (22,680) 70,000 (31,752) 75,000 (34,019) 80,000 (36,287) 100,000 (45,359)

Equip. Weight Empty lbs. (kg) 3,200 (1,452) 4,000 (1,814) 1,100 (499) 1,500 (680) 3,800 (1,724) 4,000 (1,814) 4,600 (2,087) 4,800 (2,177) 5,000 (2,268) 5,000 (2,268) 5,200 (2,359) 5,900 (2,676) 6,200 (2,812) 11,000 (4,990) 5,200 (2,359) 5,400 (2,449) 5,600 (2,540) 1,100 (499) 1,920 (871) 2,000 (907) 2,100 (953) 2,900 (1,315) 12,000 (5,443) 12,500 (5,670) 12,800 (5,806) 15,900 (7,212) 17,300 (7,847) 19,500 (8,845) 10,500 (4,763) 10,500 (4,763) 12,500 (5,670) 12,500 (5,670) 13,500 (6,123) 13,500 (6,123) 16,000 (7,257) 17,000 (7,711) 17,000 (7,711) 16,000 (7,257) 20,500 (9,299) 20,500 (9,299) 21,000 (9,525) 20,000 (9,072) 12,500 (5,669) 12,800 (5,806) 14,250 (6,464) 14,700 (6,668) 12,500 (5,669) 12,500 (5,669) 15,000 (6,804) 12,500 (5,669) 12,500 (5,669) 12,500 (5,670) 6,600 (2,994) 8,100 (3,674) 8,100 (3,674) 3,200 (1,451) 2,600 (1,179) 2,800 (1,270) 3,200 (1,451) 5,900 (2,676) 7,300 (3,311) 4,500 (2,041) 6,400 (2,903) 6,800 (3,084) 6,800 (3,084) 7,500 (3,402) 10,000 (4,536) 11,000 (4,990) 12,000 (5,443) 18,000 (8,165)

Deck Size ft. (m) 14 (4.3) 18 (5.5) 22-33 (6.7 -10) 22-33 (6.7 -10) 22-33 (6.7 -10) 22-33 (6.7 -10) 22-33 (6.7 -10) 22-33 (6.7 -10) 22-33 (6.7 -10) 22-33 (6.7 -10) 22-33 (6.7 -10) 10 (3) 10 (3) 10 (3)

34 (10.4) 38 (11.6) 38 (11.6) 38 (11.6) 38 (11.6) 38 (11.6) 39 (11.9) 39 (11.9) 44 (13.4) 44 (13.4) 44 (13.4) 44 (13.4) 45 (13.7) 45 (13.7) 45 (13.7) 45 (13.7) 45 (13.7) 45 (13.7) 45 (13.7) 45 (13.7) 48 (14.6) 48 (14.6) 48 (14.6) 48 (14.6) 48 (14.6) 48 (14.6) 48 (14.6) 48 (14.6) 48 (14.6) 48 (14.6) 20 (6.1) 22 22 (6.7) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 13 (3.9) 16 (4.9) 16 (4.9) 16 (4.9) 24 (7.3) 33 (10.1) 38 (11.6) 38 (11.6) 42 (12.8) 48 (14.6)

Mfg/ Model XF-70-2 HDG XF-80-2 HDG XF-80-3 HDG XF-100-2 HDG XF-100-3 HDG XF-110-3 HDG XF-120-3 HDG XF-70-2 HDG-L XF-80-2 HDG-L XF-100-2 HDG-L XF-100-3 HDG-L XF-110-3 HDG-L XF-120-3 HDG-L XF-HD-100-3 HDG XF-HD-110-3 HDG XF-HD-120-3 HDG XF-HD-130-3 HDG XF-100-3 HDG-SL XF-110-3 HDG-SL XF-120-3 HDG-SL FT-50-2 RGT-L FT-70-3 RGT-L

Weight Cap. lbs. (kg) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 70,000 (31,752) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 130,000 (58,967) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 50,000 (22,680) 70,000 (31,752)

Equip. Weight Empty lbs. (kg)

Deck Size ft. (m)

14,500 (6,577) 15,500 (7,031) 18,200 (8,255) 16,200 (7,348) 18,200 (8,255) 18,500 (8,391) 19,500 (8,845) 15,300 (6,940) 16,000 (7,257) 17,000 (7,711) 18,600 (8,437) 19,000 (8,618) 20,000 (9,072) 18,700 (8,482) 19,000 (8,618) 20,000 (9,072) 22,000 (9,979) 18,900 (8,573) 19,500 (8,845) 20,500 (9,299) 14,300 (6,486) 16,600 (7,530)

22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 22 (6.7) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 24 (7.3) 38 (11.6) 40 (12.2)

LANDOLL Mfg/ Model

Weight Cap. lbs. (kg)

LT1016 LT1016+4 LT1020 LT1220 LT1420 L2024 L2424 L4024 L5029 317D-48 317D-50 317D-53 318D-48 318D-50 318D-53 440A-48 440A-50 440A-53 455A-48 455A-50 455A-53 835E-51C 835E-53C 855E-48CE 855E-48CA 855E-53-Const 855E-HD Const 135-43 150-45 150-48 930D-45-12 930D-48-12 930D-48-15 930D-51-15 950D-48-12 950D-48-15 950D-51-15

10,000 (4,535) 10,000 (4,535) 10,000 (4,535) 12,000 (5,443) 14,000 (6,350) 20,000 (9,072) 24,000 (10,886) 40,000 (18,144) 50,000 (22,680) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 70,000 (31,751) 70,000 (31,751) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359)

Equip. Weight Empty lbs. (kg) 3,150 (1,428) 3,500 (1,587) 3,150 (1,428) 3,700 (1,678) 4,200 (1,905) 5,900 (2676) 6,000 (2721) 8,500 (3,855) 10,200 (4,627) 16,560 (7,511) 18,340 (8,319) 19,700 (8,936) 20,580 (9,335 ) 21,000 (9,525) 22,000 (9,979) 18,200 (8,255) 19,400 (8,800) 19,900 (9,026) 20,190 (9,158) 22,870 (10,374) 24,060 (10,913) 17,740 (8046) 18,580 (8,428) 23,100 (10,478) 24,865 (11,279) 23,900 (10,841) 25,400 (11,521) 13,450 (6,100) 17,640 (8,001) 17,055 (7,736) 17,265 (7,831) 17,660 (8,010) 18,770 (8,513) 19,250 (8,731) 20413 (9,259) 21,419 (9,738) 19,385 (8,792)

Deck Size ft. (m) 16x8.5(4.8x2.6) 16x8.5(4.8x2.6) 20x8.5(6.1x2.6) 20x8.5(6.1x2.6) 20x8.5(6.1x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 29x8.5 (8.8x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 29.8x8.5 (9.04x2.6) 31.8x8.5 (9.64x2.6) 22.5x8.5 (6.2x2.6) 26x8.5 (7.9x2.6) 48x8.5 (14.6x2.6) 26x8.5 (7.9x2.6) 43x8.5 (13.1 x 2.6) 45x8.5 (13.7 x 2.6) 48x8.5 (14.6x2.6) 45x8.5 (13.7 x 2.6) 48x8.5 (14.6x2.6) 48x8.5 (14.6x2.6) 51x8.5 (15.5x2.6) 48x8.5 (14.6x2.6) 48x8.5 (14.6x2.6) 51x8.5 (15.5x2.6)

Page 68 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

CHART from page 67

TALBERT Mfg/ Model AC-10 TT-10 AC-20 TT-20 AC-20-ART Air Ramp (Air) Tilt Series AC3-25 T3T-25 AC-23-ART Air Ramp (Air) Tilt Series Hydraulic Tail (HT) 35 Ton Slide Axle (TA) 40 Ton Slide Axle (TA) 55 Ton Double Drop (SRG) Doube Drop TELE 35CC 50CC 55CC 35RP 55RP 55SA 55SA-LD 55SA-HX 55SA-RC 55SA-TELE 60SA 65-85 Ton (East/West Coast) E1Nitro Equalizer E2Nitro Equalizer E3Nitro Equalizer Drop Deck (Oil Field) 60FG (Oil Field) 65FG (Oil Field) 4048TA - Traveling Axle Series 4050TA- Traveling Axle Series 4053TA - Traveling Axle Series 5548TA - Traveling Axle Series 5553TA - Traveling Axle Series

Weight Cap. lbs. (kg) 20,000 (9,072) 20,000 (9,072) 40,000 (18,144) 40,000 (18,144) 40,000 (18,144) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 70,000 (31,751) 80,000 (36,287) 110,000 (49,895) 60,000 - 110,000 (27,215 - 49,895) 60,000 - 110,000 (27,215 - 49,895) 70,000 (31,751) 100,000 (45,359) 110,000 (49,895) 70,000 (31,751) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 120,000 (54,431) Beginning at 130,000 (58,967) For use up to 60 Ton Trailers For use with up to 70 Ton Trailers For use with up to 85 Ton Trailers 110,000 (49,500) 120,000 (54,431) 130,000 (58,967) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 110,000 (49,895) 110,000 (49,895)

XL SPECIALIZED TRAILERS Mfg/ Model XL 80 Low-Profile HDG XL 110 Low-Profile HDG XL 110 Low-Profile HDG: 18" Deck XL 120 Low-Profile HDG XL 110 Cheater HDG XL 80 SDE (Step Deck Extendable) XL 120 SDE (Step Deck Extendable) XL 70 MFG (Mechanical Full-width Gooseneck) XL 100 HFG (Hydraulic Folding Gooseneck) able) XL 70 MDE (Mechanical Detachable Extend able) XL 80 MDE (Mechanical Detachable Extend able) XL 90 MDE (Mechanical Detachable Extend XL 80 HDE (Hydraulic Detachable Extendable) XL 90 HDE (Hydraulic Detachable Extendable) able) XL 100 HDE (Hydraulic Detachable Extend able) XL 110 HDE (Hydraulic Detachable Extend able) XL 120 HDE (Hydraulic Detachable Extend XL 80 Power Tail

Weight Cap. lbs. (kg) 120,000 (54,431) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 110,000 (49,895) 80,000 (36,287) 120,000 (54,431) 70,000 (31,751) 100,000 (45,359) 70,000 (31,751) 80,000 (36,287) 90,000 (40,823) 80,000 (36,287) 90,000 (40,823) 100,000 (45,359) 110,000 (49,895) 120,000 (54,431) 80,000 (36,287)

see CHART page 72

Equip. Weight Empty lbs. (kg) 5,800 (2,630) 8,800 (3,991) 8,500 (3,856) 10,300 (4,672) 9,200 (4,173) 11,700 (5,307) 14,110 (6,400) 12540 (5,688) 14,600 (6,622) 18,420 (8,355) 22,140 (10,042) 14,920 (6,768) Specs vary 14,540 (6,595) 18,180 (8,245) 22,450 (10,183) 18,910 (8,577) 22,400 (10,160) 20,850 (9,457) 23,850 (10,818) 21,660 (9,825) 21,960 (9,961) 29,200 (13,244) 22590 (10,246) Specs vary 2,950 (1,338) 5250 (2381) 6990 (3171) Starting at 27,150 (12,315) Starting at 27,160 (12,320) Starting at 31,100 (14107) 18,420 (8,355) 19,480 (8,836) 19,480 (8,836) 21,080 (9,562) 22,140 (10,043)

Concentrated Weight Cap. lbs. (kg) 110,000 (49,895) in 10 ft. (3 m) 100,000 (45,359) in 10 ft. (3 m) 100,000 (45,359) in 16 ft. (4.8) 110,000 (49,895) in 10 ft. (3 m) 110,000 (49,895) in 10 ft. (3 m) 60,000 (27,215) in 10 ft. (3 m) closed 100,000 (45,359) in 10 ft. (3 m)closed 70,000 (31,751) in 16 ft. (4.8 m) 100,000 (45,359) in 10 ft. (3 m) 50,000 (22,680) in 10 ft. (3 m) closed 60,000 (27,215) in 10 ft. (3 m) closed 70,000 (31,751) in 10 ft. (3 m) closed 60,000 (27,215) in 10 ft. (3 m) closed 70,000 (31,751) in 10 ft. (3 m) closed 80,000 (36,287) in 10 ft. (3 m) closed 90,000 (40,823) in 10 ft. (3 m) closed 100,000 (45,359) in 10 ft. (3 m) closed 50,000 (22,680) in 10 ft. (3 m)

Deck Size ft. (m) 24 (7.32) 24 (7.3) 27 (8.23) 25 (7.62) 24 (7.3) 29 (8.84) 29 (8.84) 29 (8.84) 30 (9.14) 48-53x8.5 (14.63-16.15x2.59) 48-53x8.5 (14.63-16.15 x 2.59) 47.3. to 52.8 x 8.5 (14.43 to 15.80 x 2.59) Specs vary 24x8.5 (7.32x2.59) 25x8.5 (7.62 x 2.59) 26x8.5 (7.92x2.59) 24x8.5 (7.32x2.59) 24x8.5 (7.32x2.59) 25x8.5 (7.62 x 2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 25x8.5 (7.62 x 2.59) Specs vary N/A N/A N/A 48 - 53 (14.63-16.15) Starting 42 (12.80) Starting 59 (17.98) 48x8.5 (14.6x2.6) 50x8.5 (15.2x2.6) 53x8.5 (16.1x2.6) 48x8.5 (14.6x2.6) 53x8.5 (16.1x2.6)

Deck Size ft. (m) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 26x8.5 (7.92x2.59) 24x8.5 (7.32x2.59) 38 to 62.8x8.5 (11.5 to 19.14x2.59) 38 to 57.8x8.5 (11.58 to 17.61x2.59) 29x8.5 (8.84x2.59) 23.5x8.5 (7.16x2.59) 29x8.5 (8.84x2.59) 29x50.33 (8.8x15.34) 29x50.34 (8.8x15.34) 28.58 to 49.92x8.5 (8.71 to 15.21x2.59) 28.58 to 49.92x8.5 (8.71 to 15.21x2.59) 24.08 to 49.42x8.5 (7.33 to 15.06x2.59) 24.08 to 49.42x8.5 (7.33 to 15.06x2.59) 27.08 to 46.42x8.5 (8.25 to 14.14x2.59) 39 x 8.5 ft. (11.9x2.59)

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 69

2016 Ram 1500

2015 Ram 2500 Bay Bridge Cube

Laramie Crew Cab 4x4

Fall Special $41,513*

Fall Special $33,988*

Fall Special $51,512*

2016 Pro Master Ram 1500

2016 Ram 3500

w/Upfit Kits Included Valued at $4,760

with Flatbed

2016 Pro Master Ram 2500

Fall Special $30,417*

Fall Special $32,583*

Fall Special

Crew Cab 4x4,

Must Finance Thru Chrysler Financing

2016 3500 w/Snow Removal Package Including 9’ Rugby and Hiniker Poly Scoop Plow Upfit Package Included Valued at $6750

2016 Ram

2015 Ram 5500 Plow Ready

Promaster Cutaway w/Knapheide KUV Body

w/11 1/2’ Stainless Steel Dump Body

Fall Special $59,148*

Fall Special $37,988*

Fall Special

#1 Chrysler Corp. Commercial Dealer in Minnesota

RAM H.D. HEADQUARTERS

The fast lane for small business.

If we don’t have it, we’ll build it for you!

Fury Ram Truck Center, Lake Elmo, Minnesota 651-777-1316 • Visit us at furymotors.com

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters Ready to Go!

* Pricing represents all Denver business center rebates deducted!

Page 70 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

Many Manufacturers Offer Wide Variety of Trailers HISTORY from page 64

needs. For more information, call 800/433-5384 or visit interstatetrailers.com. Landoll Corporation Quick Service Welding Company opened in December 1963 as a welding, radiator repair and blacksmith shop in rural Kansas. The business was founded by Don Landoll and his partner, but by 1967, his partner left the business, leaving him as sole owner. Landoll had always wanted to design and build things on his own. In 1968, he designed a slip-in livestock rack for pickup trucks and a chisel plow for local farmers. By 1969, the company diversified and began manufacturing equipment trailers, among other items. According to the company, “Landoll designed and patented the traveling axle ground-loading trailer in 1970. This became the backbone of the company’s trailer line. By 1975, Landoll Corporation was formed and the Marysville, Kan., location was producing the company’s trailer and tillage lines.” In 1990, the company contracted with the U.S. Army to manufacture special tank transport trailers to be used in Operation Desert Storm. By January 1991, Landoll had shipped 22 trailers for this purpose. As demand grew, the company continued to build larger shops to manufacture products and improve production. By 1994, the company had 350,000 sq. ft. of manufacturing space under roof on 22 acres, along with state-of-the- art equipment. Today, Landoll provides trailers ranging from 5- to 60-ton (4.5 to 54.4 t) capacity, servicing many industries including towing and recovery, construction, agriculture, rental, forklifts and storage containers. For more information, call 800/428-5655 or visit landoll.com. Rogers Brothers Corporation Rogers Brothers Corporation has been in business since 1905. Located in Albion, Pa., the company offers a variety of trailers

Talbert Construction Equipment photo

In 1947, Austin Talbert noticed an alarming number of injuries and deaths occurred when operators drove equipment up onto trailers. In response, he designed and patented the first removable gooseneck trailer to reduce workforce injuries.

designed for the construction, paving and mining industries, as well as specialized trailers for a single purpose, such as boilers, transformers and steel. For more information, call 800/441-9880 or visit rogerstrailers.com. SmithCo Manufacturing SmithCo Manufacturing was founded in Le Mars, Iowa, by Greg Smith in 1994. Smith wanted to design a side dump trailer to meet the Federal Bridge Formula and improve safety by reducing tip over. The company started production in 1994, producing three trailers with just three employees. By 1998, the company was producing 250 trailers. In 1999, a new 70,000-sq.-ft. state-of-the-art facility was built, allowing for the production of 800 trailers per year. SmithCo offers side dump trailers for many markets including road and building contractors; aggregate producers; agriculture; demolition contractors; governmental bodies; the waste handling and environmental clean-up industry; and erosion control contractors. For more information, call 800/779-8099 or visit sidedump.com. Talbert Construction Equipment Company In 1938, Austin Talbert founded a company in Lyons, Ill., to provide crane and construction machinery, as well as heavy haul transport to contractors in the

Landoll Corporation photo

A 317 Landoll Hauloll on the job in the mid 1980s.

Chicago area. By 1957, the company built a new plant in Rensselaer, Ind., devoted to manufacturing specialty trailers. Talbert eventually closed the Lyon facility to focus on the trailer business. According to the company, Talbert’s innovation led to ideas that included: • lowbed removable gooseneck trailers; • hydraulic removable gooseneck (non-ground engaging); • the first manufacturer to use high-strength, heat-treated steel (T1A); • the first manufacturer to design and incorporate air suspensions; and • self-steering axles. Several of these ideas were patented and are still used today. Talbert offers equipment, hydraulic, spread axle, tank hauler, lowbeds, flat bed, gooseneck and heavy capacity trailers. They also manufacture custom trailers for the customer’s specific needs. For more information, call

888/489-1731 talbertmfg.com.

visit

Towmaster The original line of Towmaster trailers was started in the early 1970s by Harlan Palm, owner of Palm Industries of Litchfield, Minn. The company manufactured roll-over protection for tractors and equipment. Palm saw the need for a quality trailer with a low deck height capable of moving skid loaders. The result was the Towmaster pan-style trailer available in a 5,000-lb. and 7,000-lb. (2,268 and 3,175 kg) capacity. As sales grew, a larger line of trailers, including the Contrail was designed. The Contrail was a bellydump trailer designed for asphalt. During the oil embargo of the mid1970s, sales of the Contrail dropped and the trailer was discontinued. Meanwhile, Palm had sold his business and began farming. Eventually, Palm redeveloped the pan trailer by adding a deck-

over tag-a-long trailer and marketed them under the name Palm Manufacturing. The trailers were built by a subcontractor but later were built on the farm in a large machinery building. A few years passed, and soon the company was designing and building skid loader attachments, as well as the trailers. As sales grew, the company split into Palm Attachments and Towmaster Inc. in 1994. In 1998, Towmaster became an employee-owned company. Its facility in Litchfield has undergone many additions, including a 64,000-sq.-ft. building that houses several trailer lines, three paint booths and a finishing area. According to the company, “Towmaster builds models specific for professionals in many market segments.” Towmaster builds trailers for the construction equipment and rental markets and offers more than 55 different models in eight categories, with several deck lengths and numerous options. For more information, call 320/693-7900 or visit towmaster.com. XL Specialized Trailers George Wall founded XL Specialized Trailers in 1995. Headquartered in Manchester, Iowa, the company has rapidly expanded and has become a nationwide distribution network. Wall founded the company based on innovation and improvement of existing products. Today, the company provides heavy haul and specialized trailers for the construction, commercial, agriculture, wind energy, oil and gas and custom transport markets. For more information, call 877/283-4852 or visit xlspecializedtrailer.com. Sources: gwtrans.com/flatbedtrucking; rogerstrailers.com; felling.com; talbertmfg.com; landoll.com; xlspecializedtrailer.com; towmaster.com; sidedump.com; interstatetrailers.com; eagerbeavertrailers.com; fontainetrailer.com; bri-mar.com (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 71

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857

K.C. Bobcat

McCann

2209 SW US Hwy. 40 Blue Springs, MO 64015 800-697-4228 Fax: 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001 www.kcbobcat.com

Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Willmar 1515 West litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

Transwest Truck Trailer RV 17327 S Outer Road Belton, MO 64012 816-454-7340 Fax: 816-454-7837 www.transwest.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 • Fax: 812-421-1036 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 • Fax: 812-299-3687 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 • Fax: 618- 242-9161 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 • Fax: 270-781-0907 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 • Fax: 615-641-1108 www.diamondequipment.com

Ziegler CAT

RDO Equipment Co.

8000 County Road 101 East Shakopee, MN 55379 800-352-2812

Burnsville, MN 952-890-8880 Rochester, MN 507-282-8888 North Mankato. MN 506-387-1836 Marshall, MN 507-532-0994 Sauk Rapids, MN 320-259-6222 Moorhead, MN 701-526-2200 Bismarck, ND 701-223-5798 Dickinson, ND 701-483-0115 Grand Forks, ND 701-772-4842 Minot, ND 701-852-3962 Williston, ND 701-577-0736 Aberdeen, SD 605-225-6772 Sioux Falls, SD 605-336-2730 Rapid City, SD 605-348-1566 www.rdoequipment.com

13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Page 72 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

CHART from page 68

TOWMASTER Mfg/ Model T-9P T-9P T-9P T-9P T-10P T-10P T-10P T-10P T-12P T-12P T-12P T-12P TC-9D TC-9D TC-9D TC-10D TC-10D TC-10D TC-12D TC-12D TC-12D TC-12D TC-14D TC-14D TC-14D T-9D T-9D T-9D T-9D T-10D T-10D T-10D T-10D T-12D T-12D T-12D T-12D T-14D T-14D T-14D T-16D T-16D T-16D T-18D T-18D T-18D T-20D T-20D T-20D T-5HD T-5HD T-9HD T-9HD T-10HD T-10HD T-10HD T-12HD T-12HD T-12HD T-14HD T-14HD T-14HD T-14HD T-3DT T-5DT

Weight Cap. lbs. (kg) 6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 7,400 (3,356) 7,400 (3,356) 7,400 (3,356) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 6,800 (3,084) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 16,000 (7,250) 16,000 (7,250) 18,000 (8,100) 18,000 (8,100) 18,000 (8,100) 20,000 (9,072) 20,000 (9,072) 20,000 (9,072) 5,000 (2,260) 5,000 (2,260) 7,400 (3,356) 7,400 (3,356) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 14,000 (6,350) 3,000 (1,360) 5,000 (2,260)

Equip. Weight Empty lbs. (kg) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 2,600 (1,179) 3,400 (1,542) 3,400 (1,542) 3,400 (1,542) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,190 (1,447) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 3,200 (1,451) 4,200 (1,905) 4,200 (1,905) 4,200 (1,905) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 4,600 (2,086) 1,600 (725) 1,600 (725) 2,600 (1,179) 2,600 (1,179) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950) 4,300 (1,950) 5,000 (2,268) 5,000 (2,268) 5,000 (2,268) 5,000 (2,268) 1,100 (500) 2,000 (907)

Suspension Type Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Spring Torflex Torflex

Deck Size LxW ft. (m) 6.4x14 (1.9x4.2) 6.4x16 (1.9x4.8) 6.4x18 (1.9x5.4) 6.4x20 (1.9x6) 6.4x14 (1.9x4.2) 6.4x16 (1.9x4.8) 6.4x18 (1.9x5.4) 6.4x20 (1.9x6) 6.4x14 (1.9x4.2) 6.4x16 (1.9x4.8) 6.4x18 (1.9x5.4) 6.4x20 (1.9x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 7x16 (2x4.8) 7x18 (2x5.4) 7x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x20 (2x6) 5x8 (1.5x2.4) 5x10 (1.5x3) 6.8x10 (2x3) 6.8x12 (2x3.6) 6.8x12 (2x3.6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x12 (2x3.6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x12 (2x3.6) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 4.5x10 (1.3x3) 6.4x12 (1.9x3.6)

No. of Axles 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 2 2 2 2 2 2 2 1 1

Speed Rating MPH (KPH) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88) 55 (88)

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 73

see CHART page 74

TOWMASTER CONTINUED... Mfg/ Model T-5DT T-9DT T-9DT T-9DT T-10DT T-10DT T-10DT T-12DT T-12DT T-12DT T-14DT T-14DT T-16DT T-16DT T-12T T-14T T-16T T-20T T-24T T-30T T-40T T-50T T-24TA T-40TA T-50TA TC-9 TC-9 TC-9 TC-9 TC-10 TC-10 TC-10 TC-10 TC-12 TC-12 TC-12 TC-12 TC-14 TC-14 TC-16 TC-18-3 TC-20 TC-24 T-20 T-24 T-30 T-40 T-40LP T-50 T-50LP T-50RG T-70RG T-70DTG T-100DTG T-110DTG T-120DTG T-80J T-70HT T-70HT T-70HT T-70HT T-110HT T-110HT T-110HT T-110HT

Weight Cap. lbs. (kg) 5,000 (2,260) 6,100 (2,767) 6,100 (2,767) 6,100 (2,767) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 16,000 (7,250) 12,000 (5,400) 14,000 (6,350) 16,000 (7,250) 17,300 (7,847) 24,000 (10,880) 30,000 (13,608) 40,000 (18,100) 50,000 (22,600) 24,000 (10,880) 40,000 (18,100) 50,000 (22,600) 5,400 (2,449) 5,400 (2,449) 5,400 (2,449) 5,400 (2,449) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 10,000 (4,536) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 12,000 (5,400) 14,000 (6,350) 14,000 (6,350) 16,000 (7,250) 18,000 (8,100) 19,000 (8,618) 24,000 (10,880) 19,000 (8,618) 24,000 (10,880) 30,000 (13,600) 18,000 (8,100) 40,000 (18,100) 50,000 (22,600) 50,000 (22,600) 50,000 (22,600) 70,000 (31,750) 70,000 (31,750) 100,000 (45,350) 110,000 (49,900) 120,000 (54,400) 80,000 (36,287) 70,000 (31,750) 70,000 (31,750) 70,000 (31,750) 70,000 (31,750) 110,000 (49,900) 110,000 (49,900) 110,000 (49,900) 110,000 (49,900)

Equip. Weight Empty lbs. (kg) 2,000 (907) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,800 (1,723) 3,900 (1,769) 3,900 (1,769) 3,900 (1,769) 4,400 (1,995) 4,400 (1,995) 4,500 (2,041) 4,500 (2,041) 5,560 (2,521) 5,560 (2,521) 6,460 (2,930) 8,600 (3,900) 8,600 (3,900) 9,800 (4,445) 10,500 (4,763) 12,000 (5,443) 10,610 (4,812) 12,100 (5,488) 12,600 (5,715) 4,590 (2,082) 4,590 (2,082) 4,590 (2,082) 4,590 (2,082) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 4,600 (2,087) 6,400 (2,903) 6,400 (2,903) 5,900 (2,676) 6,200 (2,812) 6,700 (3,039) 6,900 (3,130) 6,900 (3,130) 6,900 (3,130) 8,300 (3,765) 8,800 (3,992) 8,600 (3,901) 10,700 (4,853) 10,600 (4,808) 11,300 (5,125) 12,600 (5,715) 15,200 (6,895) 18,800 (8,528) 19,100 (8,664) 20,000 (9,072) 7,500 (3,402) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 17,800 (8,074) 22,800 (10,342) 22,800 (10,342) 22,800 (10,342) 22,800 (10,342)

Suspension Type Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Torflex Slipper Spring Slipper Spring Slipper Spring Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Ridewell Ridewell Ridewell Ridewell Ridewell Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700 Hutchens 9700

Deck Size LxW ft. (m) 6.4x14 (1.9x4.2) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x14 (2x4.2) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 6.8x16 (2x4.8) 6.8x18 (2x5.4) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x26 (2.5x7.9) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x18 (2.4x5.4) 8x20 (2.4x6) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x18 (2.4x5.4) 8x20 (2.4x6) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x18 (2.4x5.4) 8x20 (2.4x6) 8x14 (2.4x4.2) 8x16 (2.4x4.8) 8x16 (2.4x4.8) 8x16 (2.4x4.8) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x20 (2.5x6) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x22 (2.5x6.7) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x24 (2.5x7.3) 8.5x22 (2.5x6.7) 8.5x44 (2.5x13.4) 8.5x45 (2.5x13.7) 8.5x46 (2.5x14.0) 8.5x48 (2.5x14.6) 8.5x44 (2.5x13.4) 8.5x45 (2.5x13.7) 8.5x46 (2.5x14.0) 8.5x48 (2.5x14.6)

No. of Axles 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 2 2 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 2 2 2 2 2 2 2 3 3 2 2 2 3 3 3 2 2 2 2 2 2 2 2 2

Page 74 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

CHART from page 73

SMITHCO Mfg/ Model SX1-2317 SX2-3024 SX2-3327 SX2-4034 SX3-3734 SX3-4234 SX3-4436 SX3-4636 SX3-4936 SX4-3734 SX4-4636 SX4-4936 SX5-3734 SX5-4636 SX5-4936 S2-4034-MHV S2-4236-MHV S3-4234-MHV S3-4436-MHV S3-4636-MHV S2-4034-SHV S2-4236-SHV S3-4234-SHV S3-4436-SHV S3-4636-SHV CP-20 CP-30 50 Ton Mine Series 60 Ton Mine Series 70 Ton Mine Series 80 Ton Mine Series 90 Ton Mine Series 100 Ton Mine Series

Weight Cap. lbs. (kg) 50,000 (22,680) 60,000 (27,216) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 80,000 (36,287) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 60,000 (27,216) 60,000 (27,216) 70,000 (31,751) 70,000 (31,751) 70,000 (31,751) 40,000 (18,144) 60,000 (27,216) 100,000 (45,359) 120,000 (54,431) 140,000 (63,503) 160,000 (72,575) 180,000 (86,183) 200,000 (90,718)

INTERSTATE TRAILERS Mfg/ Model 12RBS 12BST 12TST 14RBS 14TST 16RBS 16BST 16TST 18BST 20DT 20TDT 24DT 24DTA 24TDT 30DLE 30TDE 40DLA 40TDL 50APC 50DLA 50TDL 50LBG 70LBG 70PRC 70SDGN 80LBG 80PRC 100LBG 100PRC 102SDGN 110SDGN

Weight Cap. lbs. (kg) 12,000 (5,443) 12,000 (5,443) 12,000 (5,443) 14,000 (6,350) 14,000 (6,350) 16,000 (7,257) 16,000 (7,257) 16,000 (7,257) 18,000 (8,100) 20,000 (9,072) 20,000 (9,072) 24,000 (10,886) 24,000 (10,886) 24,000 (10,886) 30,000 (13,608) 30,000 (13,608) 40,000 (18,143) 40,000 (18,143) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 50,000 (22,680) 70,000 (31,752) 70,000 (31,752) 70,000 (31,752) 80,000 (36,287) 80,000 (36,287) 100,000 (45,359) 100,000 (45,359) 100,000 (45,359) 110,000 (49,895)

Equip. Weight Empty lbs. (kg) 10,500 (4,743) 12,400 (5,625) 13,100 (5,942) 14,100 (6,396) 16,300 (7,394) 16,700 (7,575) 17,100 (,7756) 17,500 (7,938) 17,800 (8,074) 19,500 (8,845) 19,800 (8,981) 20,050 (9,095) 20,700 (9,389) 21,000 (9,525) 21,300 (9,662) 14,400 (6,532) 14,700 (6,668) 17,200 (7,802) 17,400 (7,893) 17,600 (7,983) 14,600 (6,622) 14,800 (6,713) 17,600 (7,983) 17,900 (8,119) 18,100 (8,210) 17,000 (7,711) 18,500 (8,391)

Equip. Weight Empty lbs. (kg) 3,250 (1,474) 4,575 (2,075) 3,600 (1,632) 3,250 (1,474) 4,200 (1,905) 4,250 (1,927) 4,350 (1,973) 3,700 (1,678) 4,850 (2,199) 5,900 (2,676) 5,850 (2,653) 6,100 (2,767) 6,100 (2,767) 7,200 (3,265) 7,350 (3,333) 7,350 (3,333) 7,350 (3,333) 10,000 (4,536) 13,600 (6,168) 10,850 (4,921) 13,600 (6,168) 10,900 (4,944) 12,000 (5,443) 17,500 (7,937) 16,200 (7,438) 16,000 (7,257) 21,500 (9,752) 18,000 (8,100) 24,900 (11,294) 20,500 (9,298) 20,500 (9,298)

see CHART page 78

No. of Axles

Deck Size ft. (m)

1 2 2 2 3 3 3 3 3 4 4 4 5 5 5 2 2 3 3 3 2 2 3 3 3 2 2 3 3-4 3-4 3-4 4 4

17 (5.2) 24 (7.3) 27 (8.2) 34 (10.4) 34 (10.4) 34 (10.4) 36 (11) 36 (11) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 34 (10.4) 36 (11) 36 (11) 34 (10.4) 36 (11) 34 (10.4) 36 (11) 36 (11) 24 (7.3) 22 (6.7) Built to Order Built to Order Built to Order Built to Order Built to Order Built to Order

Deck Size ft. (m) 18x6.83 (5.4x2.1) 20x8 (6.1x2.4) 20x6.83 (6.1x2.1) 18x6.83 (5.4x2.1) 20x6.83 (6.1x2.1) 18 x6.91 (5.4x2.1) 20x8.5 (6.1x2.6) 20 x6.91 (6.1x2.1) 20x8.5 (6.1x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 28x8.5 (8.5x2.6) 30 x8.5 (9.1x2.6) 29 x8.5 (8.8x2.6) 30 x8.5 (9.1x2.6) 18x8.5 (5.5x2.6) 18x8.5 (5.5x2.6) 49x8.5 (14.9x2.6) 24x8.5 (7.3x2.6) 18x8.5 (5.5x2.6) 53x8.5 (16.1x2.6) 18x8.5 (5.5x2.6) 53x8.5 (16.1x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6)

Speed Rating MPH (KPH) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 65 (105) 20 (32) 20 (32) 45 (72) 45 (72) 45 (72) 45 (72) 45 (72) 45 (72)

Speed Rating MPH (KPH) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6) 65 (104.6)

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 75

BONNELL IS NOW A CERTIFIED TRAILER DEALER! CONTACT US TO FIND THE RIGHT TRAILER FOR YOU! DIXON, DIX ON, IL • (800) 851-9664

DIX DIXON, ON, IL • (800) 851-9664

$5,820. NE NEW W Do DooLittle oLittle 22’ T Tilt-bed: ilt-bed: in stock stock available available no now w

DIXON, DIX ON, IL • (800) 851-9664

$4,955.

$3,360. NEW A NEW Aluma luma 7814S Tilt-bed: Tilt-bed: w in stock stock available available no now DIXON, DIX ON, IL • (800) 851-9664

DIX DIXON, ON, IL • (800) 851-9664

Call for Price

NEW 2016 Freightliner: NOW available. Tandem axle truck

NEW 2016 Freightliner: NOW available. Single axle truck

ROAD DRAGS

NE NEW WA Aluma7816R: luma7816R: w in stock stock available available no now DIXON, DIX ON, IL • (800) 851-9664

$5,900. 1978 International: Single Axle. 12’ Leaf Containment.

LEAF VACUUMS

DIXON, DIX ON, IL • (800) 851-9664

DIX DIXON, ON, IL • (800) 851-9664

$10,500. NE NEW WM Midsota idsota FBGN G Gooseneck ooseneck T Trailer: railer: 102”” x 36’

$6,500. Used M Used Midsota idsota STO STO S Series eries 18’: Rub rail rail and stake pockets

DIXON, DIX ON, IL • (800) 851-9664

DIX DIXON, ON, IL • (800) 851-9664

$11,900. 2011 Buick Lucerne CXL: Auto Clear Title. Leather. 57,000 miles

DIXON, DIX ON, IL • (800) 851-9664

$22,000. 1999 International 2654 Series: DT 466 Engine. 95,000 miles

SPREADERS

$2,300. DooLittle DooLittle Bullitt Cargo Cargo Trailer: Trailer: 6’’ x 10’ 0’’. A Available vailable now. now. DIXON, DIX ON, IL • (800) 851-9664

$14,000. 2008 International 4300: MaxxForce 7.6L diesel engine.

PLOWS & WINGS

MANUFACTURING. MANUF ACTURING. DISTRIBUTING DISTRIBUTING. G. SALES. SERVIC SERVICE. CE. INST INSTALL. TALL. ALL P Phone: hone: (800) 851-9664 FFax: ax: (815) 284-8815 W ebsite: w ww.bonnell.com A ddress: 1385 FFranklin ranklin Grove Grove R d., Dix on, IL 61021 Website: www.bonnell.com Address: Rd., Dixon,

Page 76 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

Thunder Creek Redesigns Service, Lube Trailer; Includes New Chassis

AIS Construction Equipment Corporation www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257

The new SLT features a modular tank design that is capable of holding 440 gal. (1,666 L) of fluid in up to eight tanks. This can include tanks for diesel fuel, oil delivery (engine or hydraulic), used oil reclamation, grease delivery, antifreeze, DEF and other fluids based on field maintenance needs.

Thunder Creek Equipment has redesigned its service and lube trailer (SLT) to include a new chassis and front-end design, expanded storage in the front and rear utility boxes, and a modular design that allows owners to add new features and components at any time after purchase. The new SLT features a modular tank design that is capable of holding 440 gal. (1,666 L) of fluid in up to eight tanks with combinations of 25, 55 and 110 gal. (94.6, 208 and 416 L). This can include tanks for diesel fuel, oil delivery (engine or hydraulic), used oil reclamation, grease delivery, antifreeze, DEF and other fluids based on field maintenance needs. “The Thunder Creek SLT provides a significantly lower total cost of ownership compared to full-sized lube trucks with similar capacities and functions,” said Luke Van Wyk, general manager, Thunder Creek Equipment. “We give equipment managers the flexibility to customize their trailer with up to eight fluids, plus separate solutions for DEF and grease in the newly expanded front and rear compartments. All together, it is one of the most comprehensive field maintenance solutions available to heavy equipment fleet operations today. “The ability for owners to easily field install many of these options after their purchase, such as the DEF system and the rear utility box, further allows the trailer to grow with their field service needs.” New SLT Provides Greater Flexibility and Customization The redesigned front-end allows for an additional 100-gal. (378.5 L) DEF storage tank and Thunder Creek’s proprietary 2-in-1 closed DEF distribution system. This can either be

included at the time of purchase or field installed at a later date. The new front enclosure is 23 percent larger than the previous model, and the rear utility box is 56 percent larger. These newly enlarged spaces give owners the opportunity to add toolboxes, workbenches, grease delivery systems and added oil/fluid capacity. In addition to fluid delivery, the SLT is outfitted with either a combination generator/air compressor or an optional 3-in-1 welder/generator/air compressor. This helps power the pneumatic pumps for fluid delivery and other jobsite tools needed for field maintenance. An optional WorkSight light tower with powerful LED lights also is available for performing service work at night. The SLT retains many of the design and performance features of the previous model, including 10-gauge steel tanks, interior LED lighting, and the pneumatic pumping system with reels up to 75-ft. (22.8 m) long. The trailer can be purchased without the rear utility box and combination generator/air compressor for those who prefer to run the air off of their truck. The redesigned front-end and chassis also helps make the trailer more maneuverable, and it features better access to working areas via hatch-style doors and ergonomically positioned components. The fenders are removable, and holes are pre-drilled into the frame to move the axle position and ensure proper weight distribution for owners who add features after the initial purchase. For more information, call 866/535-7667 or visit ThunderCreek.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 Fax: 248-437-9750

Ditch Witch of North Dakota www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

Mankato, MN • 800-321-PLUS

www.toppersplus.com 1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 77

www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.westsidetractorsales.com 1400 W. Ogden Ave. Naperville, IL 630-355-7150

600 Walnut Ct Rockdale, IL 815-730-9011

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 708-331-6362

2170 South Yost Ave. Bloomington, IN 47403 812-333-9677 Fax: 812-333-9731

3021 South 460 East Lafayette, IN 47905 765-477-6933 Fax: 765-448-9038

3120 Congressional Parkway Fort Wayne, IN 46825 260-482-8576 Fax: 260-483-4057

25166 State Road 2 South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

3110 Prairie Rd. Rockford, IL 815-961-3160 1560 North Old Rand Rd. Wauconda, IL 847-526-7700

Page 78 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

CHART from page 74

EAGER BEAVER Mfg/ Model SK6 B6DOW B8DOW B9DOW 10HDB-PT 10HA-PT 12HDB-PT 12HA-PT 15HDB-PT 20XPT 25XPT 25XPL 25GLB 35GLB 35GSL/S4S 35GSL/S 35GSL/BR 35GSL-PT 50GLB 50GSL/3 50GSL/BR 50GSL-PT 55GSL/3 55GSL/PT 60GSL/3 60GSL/PT 65GSL/3 70GSL/3 50GLB/OF (Oil Field) 60GLB/4-OF (Oil Field) 70GLB/5-OF (Oil Field)

Equip. Weight Empty lbs. (kg)

Weight Cap. lbs. (kg) 12,000 (5,442) 12,000 (5,442) 16,000 (7,257) 18,000 (8,163) 20,000 (9,070) 20,000 (9,070) 24,000 (10,884) 24,000 (10,884) 30,000 (13,605) 40,000 (18,140) 50,000 (22,675) 50,000 (22,675) 50,000 (22,675) 70,000 (31,745) 70,000 (31,745) in 12 ft. 70,000 (31,745)in 12 ft. 70,000 (31,745) in 12 ft. 70,000 (31,745) in 16 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 12 ft. 100,000 (45,350) in 16 ft. 110,000 (49,885) in 12 ft. 110,000 (49,885) in 16 ft. 120,000 (54,420) in 12 ft. 120,000 (54,420) in 16 ft. 130,000 (58,967) in 12 ft. 140,000 (63,503) in 12 ft. 100,000 (45,350) in 12 ft. 120,000 (54,420) in 12 ft. 140,000 (63,500) in 16 ft.

FONTAINE HEAVY HAULING Weight Cap. lbs. (kg)

Mfg/ Model Fontaine Heavy-Haul Renegade LXL Fontaine Heavy-Haul Renegade LX40 Fontaine Heavy-Haul Renegade LX40C Fontaine Heavy-Haul Renegade LXT40 Fontaine Heavy-Haul Renegade LXT40C Fontaine Heavy-Haul Magnitude 51 Fontaine Heavy-Haul Magnitude 55L Plus Fontaine Heavy-Haul Magnitude 55HFLD Fontaine Heavy-Haul Magnitude 55HDSR Fontaine Heavy-Haul Magnitude 55HMFLD Fontaine Heavy-Haul Magnitude 55HMDSR Fontaine Heavy-Haul Magnitude 55HMBMD Fontaine Heavy-Haul Magnitude 55MX Fontaine Heavy-Haul Magnitude 60 Class MFLD Fontaine Heavy-Haul Magnitude 60 Class MDSR Fontaine Heavy-Haul Magnitude 60 Class MBMD Fontaine Heavy-Haul Magnitude 70 Class MFLD Fontaine Heavy-Haul Magnitude 70 Class MDSR Fontaine Heavy-Haul Magnitude 70 Class MBMD Fontaine Heavy-Haul Magnitude 80 Class MFLD Fontaine Heavy-Haul Magnitude 80 Class MDSR Fontaine Heavy-Haul Magnitude 80 Class MBMD Fontaine Heavy-Haul Xcalibur 48-80 Fontaine Heavy-Haul Xcalibur 53-90 Fontaine Heavy-Haul Xcalibur 53-72 LP (a) - Extendable Trailer - Rating In fully retract (b) - Modular bogie connection (c) - Tandem and Tridem Available

3,370 (1,529) 4,200 (1,905) 4,800 (2,177) 4,600 (2,086) 5,800 (2,630) 5,880 (2,667) 6,450 (2,925) 6,530 (2,961) 8,100 (3,673) 8,380 (3,800) 11,720 (5,315) 11,720 (5,315) 11,600 (5,261) 13,900 (6,304) 15,500 (7,029) 15,900 (7,211) 17,100 (7,755) 18,200 (8,253) 23,000 (10,432) 20,500 (9,297) 21,600 (9,795) 22,700 (10,297) 22,500 (10,206) 23,425 (10,625) 22,750 (10,773) 24,500 (11,115) 26,500 (12,020) 27,790 (12,605) 21,600 (9,797) 25,120 (11,393) 28,600 (12,972)

Equip. Weight Empty lbs. (kg)

18,390/19,215 (8,342/8,716) 60,000 lbs. (27,216) in 16 ft. (4.9) 15,340/16,165 (6,958/7,332) 80,000 lbs. (36,287) in 16 (4.9) 15,340 (6,958) (4.9) 16 in 7) 80,000 lbs. (36,28 20,040/20,865 (9,090/9,464) 80,000 lbs. (36,287) in 16 (4.9) (a) 20,040 (9,090) 80,000 lbs. (36,287) in 16 (4.9) (a) 20,200 (9,163) (3.7) ft. 12 in 6) (46,26 lbs. 0 102,00 22,960 (10,414) (3.7) ft. 12 in 5) (49,89 lbs. 0 110,00 21,640 (9,816) 110,000 lbs. (49,895) in 12 ft. (3.7) 22,635 (10,267) 110,000 lbs. (49,895) in 12 ft. (3.7) 21,940 (9,952) 110,000 lbs. (49,895) in 12 ft. (3.7) 22,935 (10,403) 110,000 lbs. (49,895) in 12 ft. (3.7) 20,635 (9,237) 110,000 lbs. (49,895) in 12 ft. (3.7) 27,110 (12,297) 110,000 lbs. (49,895) in 16 ft. (4.9) 24,990 (11,335) 120,000 lbs. (54,431) in 12 ft. (3.7) 24,870 (11,280) 120,000 lbs. (54,431) in 12 ft. (3.7) 22,410 (10,165) 120,000 lbs. (54,431) in 12 ft. (3.7) 31,840 (14,442) Up to 140,000 lbs. (63,503) in 12 ft. (3.7) 32,900 (14,923) Up to 140,000 lbs. (63,503) in 12 ft. (3.7) 29,700 (13,472) (3.7) ft. 12 in 3) (63,50 lbs. 0 Up to 140,00 32,460 (14,724) (4.9) ft. 16 in 7) (81,64 lbs. 0 180,00 Up to 33,685 (15,279) (4.9) ft. 16 in 7) (81,64 lbs. 0 180,00 to Up 30,300 (13,744) Up to 180,000 lbs. (81,647) in 16 ft. (4.9) 16,060 (7,285) 80,000 lbs. (36,287) distributed (a) 17,380 (7,883) 80,000 lbs. (36,287) distributed (a) 19,330 (8,768) 80,000 lbs. (36,287) distributed (a)

ed position

No. of Axles

Suspension Type

Deck Size LxW ft. (m)

Torflex Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Leaf Spring Spring/Lift Axle Leaf Spring Single Point Spring Leaf Spring Single Point Spring Single Point Spring Air Ride Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle Air Ride/Lift Axle

14x6.7 (5.2x2.1) 20x8 (6.1x2.4) 20x8 (6.1x2.4) 20x8 (6.1x2.4) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 28x8.5 (8.5x2.6) 28x8.5 (8.5x2.6) 18x8.5 (5.5x2.6) 18x8.5 (5.5x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 22x8.5 (6.7x2.6) 39x8.5 (17.7x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 24x8.5 (7.3x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 25x8.5 (7.6x2.6) 40x8.5 (12.2x2.6) 43x8.5 (13.1x2.6) 43.5x8.5 (13.2x2.6)

Standard Deck Length ft. (m) 29.2 (8.9) 29 (8.8) 27.6 (8.4) 29 - 50 (8.8 - 15.2) 27.6 - 47.2 (8.4, 14.4) 25 (7.6) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26, 27 (7.6, 7.9, 8.2) 26 (7.9) 25, 26, 27 (7.6, 7.9, 8.2) 26 (7.9) 26 (7.9) 29 - 50 (8.8 - 15.2) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26, 27 (7.6, 7.9, 8.2) 25, 26 (7.6, 7.9) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 28 (8.5) 48 - 80 (14.6 - 24.4) 90 53 - (16.2 - 27.4) 53 - 72 (16.2 - 21.9)

Loaded Deck Height in. (cm)

2 2 2 2 2 2 2 2 2 2 3 3 2 2 2 2 2 2 3 3 3 3 3 or 4 3 or 4 3 or 4 3 or 4 3 to 7 3 to 7 3 4 5

No. of Axles

14 (35.6) 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8) 22 (55.9) 18 (45.7) 22 (55.9) 14.5 (36.8) @ Drop Side 22 (b) (55.9) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 20 (b) (50.8) 22 (b) (55.9) 14.5 (36.8) @ Drop Side (b) Beam/Rail Deck (b) 24 (b) (61) 14.75 @ Drop Side (b) Beam/Rail Deck (b) 26 (b) (66) 16.5 (41.9) @ Drop Side (b) Beam/Rail Deck (b) 59 (149.9) 60 (152.4) 59 (149.9 ) Upper/34 (86.4) Lower

2 2 2 2 2 3 3 3 3 3 3 3 3 3 to 6 3 to 6 3 to 6 3 to 7 3 to 7 3 to 7 3 to 7 3 to 7 3 to 7 2 or 3 2 or 3 3

Speed Rating MPH (KPH) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5)

Speed Rating MPH (KPH) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104) 65(104)

Gooseneck Style Mechanical and Hydraulic Mechanical and Hydraulic Mechanical Mechanical and Hydraulic Mechanical Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic N/A N/A N/A

Construction Equipment Guide • Trailers Section • www.constructionequipmentguide.com • November 19, 2016 • Page 79

BRI-MAR Mfg/ Model DT508LP-5 DT610LP-10 DT612LP-10 DT610-10DP DT712-10DP DT712LPHD-12 DT714LPHD-14 DT716LPHD-14 DTR508LP-3 DTR508LP-5 DTR510LP-5 DTR610LP-7 DTR610LP-10 DTR610-7 DTR610-10 DT716LPHD-21K DT610LP LE-7 DT610LP LE-10 DT612LP LE-10 DT712LP LE-10 DT712LP LE-12 DT714LP LE-14 EH16-10 EH16-12 EH18-10 EH18-12 EH18-14HD EH20-14HD EH16-10LE EH18-10LE EH20-10LE EH18-10LE-HDLS EH20-10LE-HDLS EH820-10 EH820-14 EH824-14 HT18-14 T16-10 T512-6 T712-6 HT20D-14 CH16-7-OPEN CH16-7-FULL CH18-7-FULL CH18-10-FULL CHT18-10 CHT20-10 UT-508 UT-510 UT-610 UT-612 UT-614 UT-714 UT-716 UT-718

Weight Cap. lbs. (kg) 3,670 (1,665) 7,785 (3,531) 7,350 (3,334) 7,660 (3,475) 7,200 (3,266) 8,440 (3,828) 9,770 (4,432) 9,735 (4,416) 1,815 (823) 3,785 (1,716) 3,580 (1,624) 5,180 (2,350) 8,060 (3,656) 5,220 (2,368) 8,040 (3,647) 16,095 (7,301) 4,670 (2,118) 7,560 (3,429) 7,180 (3,257) 7,020 (3,184) 8,940 (4,055) 10,445 (4,742) 7,505 (3.404) 9,375 (4,252) 7,460 (3,384) 9,305 (4,221) 11,000 (4,990) 10,075 (4,570) 7,940 (3,602) 7,775 (3,527) 7,315 (3,318) 7,575 (3,436) 7,125 (3,232) 9,640 (4,373) 10,260 (4,654) 9,500 (4,309) 10,510 (4,767) 6,980 (3,166) 4,640 (2,105) 4,380 (1,987) 10,150 (4,604) 5,340 (2,422) 5,010 (2,273) 4,895 (2,220) 7,570 (3,513) 7,250 (3,289) 7,230 (3,280) 2,200 (998) 2,120 (962) 1,855 (841) 1,785 (810) 1,720 (780) 5,280 (2,395) 5,075 (2,302) 4,950 (2,245)

Suspension Type

Equip. Weight Empty lbs. (kg)

SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING SPRING

1,330 (603) 2,215 (1,005) 2,650 (1,202) 2,340 (1,061) 2,800 (1,270) 3,560 (1,615) 4,230 (1,919) 4,265 (1,935) 1,185 (538) 1,215 (551) 1,420 (644) 1,820 (826) 1,940 (880) 1,780 (807) 1,960 (889) 4,905 (2,225) 2,330 (1,507) 2,440 (1,107) 2,820 (1,279) 2,980 (1,352) 3,060 (1,388) 3,555 (1,613) 2,495 (1,132) 2,625 (1,191) 2,540 (1,152) 2,695 (1,222) 3,000 (1,361) 3,925 (1,497) 2,060 (934) 2,225 (1,009) 2,675 (1,213) 2,245 (1,100) 2,875 (1,304) 3,660 (1,978) 3,740 (1,696) 4,500 (2,041) 3,490 (1,583) 3,020 (1,370) 1,360 (617) 1,620 (735) 3,850 (1,746) 1,660 (753) 1,990 (903) 2,105 (955) 3,513 (1,593) 2,750 (1,247) 2,770 (1,257) 800 (363) 880 (399) 1,145 (519) 1,215 (551) 1,280 (580) 1,720 (780) 1,925 (873) 2,050 (930)

all of them appear in this chart.

INGS.

IDE.COM FOR COMPLETE TRAILER LIST

TGU VISIT WWW.CONSTRUCTIONEQUIPMEN

Speed Rating MPH (KPH)

1 2 2 2 2 2 2 2 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

5X8 (1.5X2.4) 6X10 (1.8X3.0) 6X10 (1.8X3.0) 6X10 (1.8X3.) 7.2X12 (2.2X3.7) 6.8X12 (2.1X3.7) 6.8X14 (2.1X4.3) 6.8X16 (2.1X4.9) 5X8 (1.5X2.4) 5X8 (1.5X2.4) 5X10 (1.5X3.0) 6X10 (1.8X3.0) 6X10 (1.8X3.0) 6X10 (1.8X3.0) 6X10 (1.8X3.0) 6.8X14 (2.1X4.3) 6X10 (1.8X3.1) 6X10 (1.8X3.1) 6X12 (1.8X3.7) 6.8X12 (2.1X3.7) 6.8X12 (2.1X3.7) 6.8X14 (2.1X4.3) 6.8X16 (2.1X4.9) 6.8X16 (2.1X4.9) 6.8X18 (2.1X5.5) 6.8X18 (2.1X5.5) 6.8X18 (2.1X5.5) 6.8X20 (2.1X 6.1) 6.7X16 (2.0X4.9) 6.7X18 (2.0X5.5) 6.7X20 (2.0X6.1) 6.7X18 (2.0X5.5) 6.7X20 (2.0X6.1) 8.5X20 (2.6X6.1) 8.5X20 (2.6X6.1) 8.5X24 (2.6X7.3) 6.8X18 (2.1X5.5) 6.7X16 (2.0X4.9) 5X12 (1.5X3.7) 6.8X12 (2.1X3.7) 6.8X20 (2.1X6.1) 6.8X16 (2.1X4.9) 6.8X16 (2.1X4.9) 6.8X18 (2.1X5.5) 6.8X18 (2.1X5.5) 6.8X18 (2.1X5.5) 6.8X20 (2.1X6.1) 5X8 (1.5X2.4) 5X10 (1.5X3.1) 6.3X10 (1.9X3.1) 6.3X12 (1.9X3.7) 6.3X14 (1.9X4.3) 6.8X14 (2.1X4.3) 6.8X16 (2.1X4.9) 6.8X18 (2.1X5.5)

act all the manufacturers of trailers, not

nt Guide to cont Despite efforts by Construction Equipme

No. of Axles

Deck Size LxW ft. (m)

55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5) 55 (88.5)

Page 80 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

The ‘Next Generation’…

Landoll Unveils 900D Series Equipped With ‘H.O.S.S.’ Landoll Corporation Trailer Division has unveiled the “Next Generation Landoll” (NGL) 900D Series traveling tail trailers. The 900D traveling tail trailer is equipped with a new hydraulic operating system, nicknamed “H.O.S.S.” and an all-new Grote lighting package. The traveling tail has been transformed with increased operational speed and the dynamic “high visibility” lighting package that increases visual awareness and driver safety during night operations. Overall, operational efficiencies, less heat buildup and noise reduction, along with improved driver safety are key points in the Next Generation trailer. Operational speed increases dramatically with the new H.O.S.S. system operating at 20 gpm. “For several years we have needed to clean up the system to make it more user friendly,” said Gary Dwerlkotte. The control panel is located at chest height, encouraging ergonomic, improving visual site lines, and now allows other optional features to be installed directly onto the control panel. Brad Bergman added that “this better technology

The 900D traveling tail trailer is equipped with a new hydraulic operating system, nicknamed “H.O.S.S.” and an all-new Grote lighting package.

and design simplifies the system.” “Listening to the customer always leads us to how or what we need to improve,” said Jim Ladner. “H.O.S.S. will not only increase operational efficiency, but also keep the cus-

tomer safe by getting them out of the danger zone quicker.” For more information, visit http://www.landoll.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Talbert’s 55CC Provides Low Deck Height, High Capacity For more than a decade, Talbert Manufacturing, a North American leader in specialized heavy-haul solutions, has manufactured its 55CC close-coupled lowbed trailer. The trailer features a low deck height, high capacity rating and a removable gooseneck, allowing safe and easy loading of oversized equipment, including excavators and dozers. “Our 55CC is our most popular, best-inclass lowbed trailer,” said Troy Geisler, Talbert Manufacturing vice president of sales and marketing. “This trailer’s features maximize operator versatility, which makes it an ideal addition to virtually any equipment fleet. The innovative design continues

to provide a durable, safe choice for equipment movers.” The trailer features an 18-in. (45.7 cm) loaded deck height — 2 in. (5 cm) lower than other versions — and a 6-in. (15 cm) ground clearance for easy navigation of oversized loads under bridges and through tunnels without the need for rerouting. The trailer’s rear deck and bridge section feature the widest bucket well arrangement in the industry, allowing for maximum space to lower the excavator bucket and stick into. The recessed boom well’s robust design coupled with the deck’s low bucket well maximizes space for positioning the excavator’s bucket and stick. The efficient design pro-

vides excavator transport with the lowest possible overall height. The trailer’s 26-ft. (7.9 m) deck has a capacity rating for half the deck length, allowing operators to haul 55 tons (50 t) in 13 ft. (4 m). Most other models require distributing that weight across the entire length of the deck. Talbert’s durable solution provides an advantage for concentrated loads, like excavators and loaders. Connections for a close-coupled, pin-on fourth axle provide further distribution of the payload, when required. The 55CC features Talbert’s four-cylinder removable hydraulic gooseneck that maximizes lift capacity and load height. While most conventional trailers feature only two

Talbert Manufacturing’s 55CC lowbed trailer features an 18-in. (45.7 cm) deck height along with a high-capacity, 26-ft. (7.9 m) long deck for easy hauling of large equipment while ensuring maximum clearance under bridges and through tunnels.

or three cylinders that run perpendicular to the deck, Talbert engineered the non-ground engaging hydraulic gooseneck with four cylinders that run parallel. In addition to stronger lifting capacity, this means Talbert trailers minimize the need for frequent load adjustments. The trailer’s 108-in. (274 cm) swing radius allows haulers to distribute the weight from the drive axles to the steer axle of the tractor. Talbert constructs its main beams and side beams utilizing a 12-in. (3 cm) deep I-beam fabricated from high strength T1 steel with a minimum yield strength of 100,000 psi. The 2-in. (5 cm) Apitong flooring provides high strength for long-term durability under heavy loads. Other standard features include removable outriggers, a manual exhaust valve, recessed load-bearing bolsters and a 12-volt LED sealed light system. The 55CC trailer comes standard with six tie-down rings on each side of the deck and eight tie-down rings between the deck’s main beams. Two sections of expanded metal baskets are mounted under the center of the deck to store chain and other items required for the job. Talbert trailers come standard with Valspar R-Cure 800 paint to prevent corrosion. For additional protection from the elements customers have the ability to upgrade the primer from alkyd to a zinc rich primer or Valspar’s. For more information, call 800/348-5232 or visit www.talbertmfg.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide â€˘ Trailers Section â€˘ www.constructionequipmentguide.com â€˘ November 19, 2016 â€˘ Page 81

60TH ANNIVERSARY SPECIAL! $71,500 THROUGH THE END OF THE YEAR

Signature Series 503-554 SS SF *HYDRAULIC DETACHABLE GOOSENECK

6KRZQ ZLWK RSWLRQDO 13 HP Honda Motor

Standard Features: 12â€™-9â€? Gooseneck with 86â€? & 110â€? Swing Clearance Angled front sill on gooseneck Full width frame jack Âľ +HDY\ 'XW\ )URQW Ă LS UDPSV Âľ +HDY\ 'XW\ )URQW Ă LS UDPSV )XOO\ ER[HG EHDPV DW IURQW DSSURDFK )XOO\ ER[HG EHDPV DW IURQW DSSURDFK 5 DWFKHW GHVLJQ IRU PXOWLSOH ULGH KHLJKW DGMXVWPHQW 5DWFKHW GHVLJQ IRU PXOWLSOH ULGH KHLJKW DGMXVWPHQW Âľ 3LHUFHG VWHHO SODWH LQ IURQW GHFN IRU FKDLQ ELQGHU VWRUDJH Âľ 3LHUFHG VWHHO SODWH LQ IURQW GHFN IRU FKDLQ ELQGHU VWRUDJH Stub In cross members in outer bay Âľ $SLWRQJ GHFNLQJ Âľ $SLWRQJ GHFNLQJ 3DLU FKDLQ VORWV LQ RXWHU Ă DQJHV 3DLU FKDLQ VORWV LQ RXWHU Ă DQJHV ))XOO GHSWK RXW ULJJHUV XOO GHSWK RXW ULJJHUV

%HQW ' 5LQJV SHU VLGH %HQW ' 5LQJV SHU VLGH :LGH /RDG 3DFNDJH WR VXSSRUW 2 6 ZHEV :LGH /RDG 3DFNDJH WR VXSSRUW 2 6 ZHEV Lowered cross members in last 8â€™ Manual +3/-3 Valve 27,500 lb. Axles Firestone 255/70R22.5 16 Ply 3rd Axle Lift 3rd Tail Light Pkg. w/Rear Strobes 3 Position Manual Raise & Lower Valve Air & Electric for 4th Axle WK $[OH &DSDEOH DV $[OH RU WK $[OH &DSDEOH DV $[OH RU

Load King is celebrating this milestone by offering industryZ ZLGH VSHFLDOV RQ LWV PRVW SRSXODU PRGHOV LQFOXGLQJ WKH LGH VSHFLDOV RQ LWV PRVW SRSXODU PRGHOV LQFOXGLQJ WKH newly redesigned Detachable Gooseneck 503/554 SS SF model, which Load King will offer with standard attachments for $71,500 until the end of the year. For P PRUH LQIRUPDWLRQ RQ WKH DQQLYHUVDU\ VSHFLDO DQG IXOO RUH LQIRUPDWLRQ RQ WKH DQQLYHUVDU\ VSHFLDO DQG IXOO VVSHFLĂ€FDWLRQV RQ WKH QHZ WUDLOHU GHVLJQV YLVLW /RDG .LQJ SHFLĂ€FDWLRQV RQ WKH QHZ WUDLOHU GHVLJQV YLVLW /RDG .LQJ Trailerâ€™s website or contact your local Load King dealer. (888) 264-5522 www.loadkingtrailers.com 701 East Rose Street Elk Point, South Dakota, 57025

Page 82 • November 19, 2016 • www.constructionequipmentguide.com • Trailers Section • Construction Equipment Guide

XL Specialized Trailers Opens New Service Center XL Specialized Trailers recently opened a fully functioning trailer service center located across the street from its headquarters and main manufacturing facility in Manchester, Iowa. The service center is designed specifically to service trailers: lowboys, flatbeds and other trailer models. XL plans to use its expert trailer knowledge to tackle many types of service work — everything from preventative maintenance to full restoration. “We are very excited to announce the opening of this service center,” said Rodney Crim, vice president of sales at XL. “Heavy haul trailers are an investment. Extending their lifecycle is important for our customers, therefore it is important to us. We have been servicing trailers for years, and now this service center will allow us to handle trailer service work on a large scale.” The location next to the manufacturing facility makes all of XL’s engineering and production resources readily available if needed. All service center work will continue to be processed through XL’s customer service department. “We don’t want to turn anyone away,” said Josh Doyle, customer service manager at XL. “With our background knowledge of specialized trailers, we can complete a wide variety of projects.” For more information, visit xlspecializedtrailer.com. XL Specialized Trailers recently opened a fully functioning trailer service center located across the street from its headquarters and main manufacturing facility in Manchester, Iowa.

Felling Lowers the Angle With 8-Foot Air Ramps Felling Trailers Inc. has recently expanded its air ramp length options for deck-over tags and semi trailer lines, now offering an 8 ft. (2.4 m) air ramp(s). For close to a decade Felling Trailers has offered air ramps with available lengths of 6 and 7 ft. (1.8 and 2.1 m). The 8-ft. air ramps were designed to accommodate for the load angle necessary when loading cumbersome Felling Trailers Inc. has recently expanded its air low clearance equipment ramp length options for deck-over tags and semi trailsuch as paving equipment er lines, now offering an 8-ft. (2.4 m) air ramp(s). and directional drills. With • 2 cushion cylinders the 8-ft. air ramp(s) length it provides the • Requires 120 lb. psi user a gentler, more gradual incline to pro• Ramps available with: wood inlaid and vide ease in loading/unloading. The 8-ft. air self cleaning 5 by 3 in. (12.7 by 7.6 cm) ramp option offers a load angle of 13 degrees angle iron and 11 degrees with the option of air ride For more information, call 1.800/245suspension when air is dropped. 2809 or visit www.felling.com. • Offered on deck-over low profile tags (This story also can be found on and semi trailers Construction Equipment Guide’s website at • 2 Firestone air bags www.constructionequipmentguide.com.)

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 83

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com

BUCK & KNOBBY EQUIPMENT CO. 6220 Sterns Rd Ottawa Lake, MI 49267 734-856-2811

CUSTOM TRUCK & EQUIPMENT 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

VERMEER MIDWEST 2801 Beverly Dr. Aurora, IL 60502 630-820-3030

3310 W. Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494

120 E. Martin Dr, Goodfield, IL 61742 309-965-3300

940 Garden Ln. Fowlerville, MI 48836 517-915-0555

1801 179th St. North East Moline, IL 61244 309-751-9540

621 Spirit Valley E Dr. Chesterfield, MO 63006 636-532-2332

13402 Britton Park Rd. Fishers, IN 46038 317-842-1040

1098 Franklin St. Marne, MI 49435 616-677-5900

VERMEER OF IOWA & NORTHERN MO PO Box 168-661 Hwy T14 Pella, IA 50219 641-628-2000

VERMEER OF THE BLUFF 22025 221st St. Glenwood, IA 51534 712-302-9100

ROEDER IMPLEMENT INC. VERMEER SIOUXLAND 4858 D Ave. Marcus, IA 51035 712-376-2310

VERMEER OF EASTERN IOWA 101 Commerce Blvd. Tipton, IA 52772 563-886-2444

2550 Rockdale Rd. Dubuque, IA 52003 563-557-1184 Fax: 563-583-1821

Page 84 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Project Will Be Part of Corridor From Mayfield to Bowling Green BRIDGE from page 62

steel with a concrete deck. Chavez said safety on the job is a top priority. “PCL strives to be a zero incident company. We try to achieve this by hazard identification and elimination, along with training. We also have a full-time HSE supervisor on site.” Chavez also said that motorists are not really inconvenienced during construction. “Since we have the trestle and are able to take deliveries from it, we rarely affect traffic with lane closures. “The complexity of the foundations and the basket handle tied arch keep us on our toes. Our PCL team, along with Kentucky Transportation Cabinet, have a solid working relationship, which makes it easier to perform our work.” Once completed, the Lake Bridges Project will provide a continuous, fourlane route from Aurora to Cadiz, crossing both lakes and Land Between The Lakes. It will eventually be part of a four-lane corridor from Mayfield to Bowling Green. Construction will be completed by April 2019, and is tied to the reconstruction of a section of U.S. 68/KY 80 in western Trigg County. Rogers Group was awarded a $54 million contract for approximately 8 mi. (12.8 km) of new four-lane highway between Cadiz and Canton. The project supplies a missing link in the long-awaited U.S. 68/KY 80 four-lane corridor through southern Kentucky. “This reconstruction project in Trigg County brings us another step closer to the completion of the four-lane eastwest corridor across southern Kentucky,” said Gov. Matt Bevin. “Work is progressing on the new bridge over Lake Barkley, and completion of this section will provide better accessibility for tourists visiting the scenic Land Between The Lakes National Recreation Area.” The work includes construction of a new four-lane roughly paralleling the existing roadway from the intersection of U.S. 68-Business at Cadiz extending to the east end of the Lake Barkley Bridge at Canton. Engineers in KYTC District 1 conducted a pre-construction meeting with the contractor, with the expectation that some earth work could start near the east end of the project early in the year.

WEST SIDE TRACTOR SALES CO. www.westside tractorsales.com 1400 W. Ogden Ave. • Napervile, IL 60563 630-355-7150 Fax: 630-355-7173

PCL Civil Constructors photo

150 W. 162nd St. Route 6 • South Holland, IL 60473 708-331-6362 Fax: 708-331-7334 3110 Prairie Rd. • Rockford, IL 61102 815-961-3160 Fax: 815-965-1810 1560 N. Old Rand Rd. • Wauconda, IL 60084 847-526-7700 Fax: 847-526-3565 600 Walnut Court • Rockdale, IL 60436 815-730-9011 Fax: 815-730-9036

AIS CONSTRUCTION EQUIPMENT CORPORATION www.aisequip.com

Crews in Kentucky are working to complete a modern, four-lane bridge to carry U.S. 68/KY 80 over Lake Barkley, and serve as the eastern entrance to Land Between The Lakes National Recreation Area.

The $128 million project is the second of two bridge replacements.

However, the contractor was required to obtain a number of permits for work in environmentally sensitive areas near Lake Barkley before work could extend to the western end of the project corridor. “Our goal is to have traffic running on this new section shortly after the new U.S. 68/KY 80 Lake Barkley Bridge is completed,” said Mike McGregor, KYTC District 1 chief engineer. “This project will improve connectivity and safety, as well as promote economic growth along the US 68/KY 80 corridor.” The project is federally supported, and with the recent passage of the federal surface transportation bill, steady funding was available to complete construction along the corridor. “The biggest concern on the project is acquiring the final environmental clearances to perform construction in certain areas,” said McGregor. “Also, it’s a significant challenge to meet the mitigation requirements for constructing new earthen fills in the Army Corps

of Engineers permitted flood zone. Finding areas that can be excavated in the flood zone to offset any new fill is challenging, because of very limited locations that meet the criteria. There also were other areas that were deemed to have archeological significance, and thus had to be investigated, evaluated and protected per environmental standards.” According to McGregor, planning for the corridor improvements took well over a decade. “The project design team had to coordinate with the Federal Highway Administration, U.S. Fish and Wildlife, U.S. Coast Guard, U.S. Army Corps of Engineers and many other regulatory agencies, in order to meet the requirements of those agencies prior to constructing such a roadway in this environment. The Army Corps of Engineers requires that the permittee excavate one cubic yard of material for every one cubic yard of new fill added somewhere else in the flood zone,” said McGregor. “ Given the range of challenges that has faced this corridor, it’s very satisfying to finally see construction underway. We look forward to the day the entire corridor is open and filled with cars and trucks.” (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

3600 North Grand River Avenue • Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. • Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue • Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 Saginaw 4600 AIS Drive P.O. Box 253 • Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East • Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit 56555 Pontiac Trail • New Hudson, MI 48165 248-437-8121 800-457-8121

RDO EQUIPMENT CO. www.rdoequipment.com 12500 DuPont Ave. S. • Burnsville, MN 952-890-8880 1910 LorRay Dr. • North Mankato. MN 506-387-1836 1236 60th Ave. N.W. • Rochester, MN 507-282-8888 6700 Highway 10 NW • Sauk Rapids, MN 320-259-6222

hitachiconstruction.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 85

NORTRAX www.nortrax.com 310 Industrial Park Drive • Ashland, WI 54806 715-682-5522 Fax: 715-682-8476 4341 South Prairie View Rd. (Hwy 53 North) Chippewa Falls, WI 54729 715-834-2924 Fax: 715-834-1173 1890 US Hwy 8 • Monico, WI 54501 715-487-5583 Fax: 715-487-5968

IS IN OUR GENES.

1425 O’Keefe Drive • Mosinee, WI 54455 715-693-3820 Fax: 715-693-3825 259 Convenience Lane Southwest • Bemidji, MN 56601 215-759-1996 Fax: 218-759-1790 3401 Arrowhead Rd. • Duluth, MN 55811 218-722-7456 Fax: 218-722-2619 34316 Hwy 2 • Grand Rapids, MN 55744 218-326-9427 Fax: 218-327-1248 1818 North Lincoln Rd. • Escanaba, MI 49829 906-789-9054 Fax: 906-789-0344

BROOKS TRACTOR www.brookstractor.com Sun Prairie 1900 W. Main St. • P.O. Box 9 • Sun Prairie, WI 53590 608-837-5141 Fax: 608-837-4012 Milwaukee 12101 W. Silver Spring Dr. • Milwaukee, WI 53225 414-462-9790 Fax: 414-462-7242 De Pere 1031 Lawrence Dr. • De Pere, WI 54115 920-336-5711 Fax: 920-336-6405 West Salem 451 W. Avenue N. • West Salem, WI 54669 608-786-2644 Fax: 608-786-2206 Plover 5429 Prairie Dr. • Plover, WI 54467 715-254-2777 Fax: 715-254-2799 COMING 2016 Mount Pleasant 1609 SE Frontage Rd. • Mt. Pleasant, WI 53177

RUDD EQUIPMENT COMPANY www.ruddequipment.com 4344 Poplar Level Rd • Louisville, KY 40213 502-456-4050 6901 Highway 41 N • Evansville, IN 47725 812-867-6661 5820 Industrial Rd • Fort Wayne, IN 46825 260-482-3681 2655 Kentucky Ave • Indianapolis, IN 46221 317-247-9125

Did you know over one-third of all hydraulic mining excavators working worldwide are Hitachi? They’re built to dig through the world’s harshest environments. That same toughness is passed down to our focused family of construction excavators. So whether you are pulling down a 60-foot-high wall of traprock or laying a mile of pipe, you get the same proven durability to get the job done. That’s the Power of Focus.

728 W Cumberland Gap PKWY • Corbin, KY 40701 606-528-9440 2114 Highway 1428 E • Prestonsburg, KY 41653 606-874-2104 4679 Baumgartner Rd • St. Louis, MO 63129 314-487-8925 11807 Enterprise Drive • Cincinnati, OH 45241 513-321-7833 2512 Jackson Pike • Columbus, OH 43223 614-636-4050 COMING SOON: Cleveland, OH 216-393-7833

HitachiConstruction.com

Page 86 • November 19, 2016 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

1985! e c n i S

NEW, USED & REMAN PARTS • • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! (888) 288-1052 jennifer@RBusedParts.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 87

BUILDING AMERICA

SINCE 1859, GEHL HAS CREA CREATED INNOVATIVE TED INNOV VA ATIVE SOLUTIONS FOR EQUIPMENT OWNERS AND USERS. Today, To oday,, Gehl carries the tradition forward with a complete line of skid loaders, track loaders, articulated loaders and compact excavators G HVLJQHG ZLWK SURGXFWLYLW\ DQG HI¿FLHQF\ LQ PLQG GHVLJQHG ZLWK SURGXFWLYLW\ DQG HI¿FLHQF\ LQ PLQG

WOULD YOU LIKE A FREE FLEET OF NEW EQUIPMENT? SECTION 179 & BONUS DEPRECIA ATION TION ALLOW TAX AX INCENTIVES* UP TO $500,000 IN T

A full line of EDGE attachments are available for Gehl loaders and compact excavators for added versatility around the jobsite.

*Check with a tax professional for more details.

CALL YOUR LOCAL GEHL DEALER TODAY! Alta Equipment Company www.altaequipment.com 8840 Byron Commerce SW Byron Center, MI 49315 616-878-7450 Fax: 616-878-7650 1061 Stepke Court Traverse City, MI 49685 231-943-3700 Fax: 231-943-8110 56195 Pontiac Trail New Hudson, MI 48165 248-356-5200 Fax: 248-356-2029

5105 Loraine Street Detroit, MI 48208 313-394-1811 G 3283 S Dort Hwy. Burton, MI 48529 810-744-4840

Company Wrench

Custom Truck & Equipment

www.companywrench.com

7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

4805 Scooby Ln. NW Carroll, OH 43112 866-262-4181 740-654-5304 Fax: 740-687-9130

Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 Fax: 513-649-8107

Cleveland Branch 525 Golden Oak Pkwy. Oakwood Village, OH 44146 440-439-4567 Fax: 440-439-1789

1554 Old Frankfort Pike Lexington, KY 40504 866-262-4181 Fax: 859-254-1107

www.gehl.com www w.gehl.com

www.gehl.com

Page 88 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

DroneDeploy Launches App, Unlocks World’s Largest Drone Imagery Dataset DroneDeploy, a cloud-based drone software platform, announced the launch of the App Market, the first drone industry app store. The new DroneDeploy App Market launched with more than 15 inaugural apps, and offers third-party developers access to the largest dataset in the world of drone 2D maps and 3D models, to help solve business challenges. “Businesses have been asking for a more seamless integration of drone data into their workflows, and thirdparties have been looking to develop solutions for our global community,” said Mike Winn, CEO and co- founder of DroneDeploy. “The DroneDeploy App Market offers one-click integrations with companies like Box and John Deere, a huge step in enabling commercial drone users.” The introduction of the App Market

emphasis on accuracy, in just over a year the company has grown to four locations and has been awarded large contracts in the mining and surveying industries. “As a daily user of DroneDeploy for aerial imagery, I’m very excited to see the launch of the app store and all the new applications,” said Shelly Engel, co-owner of Bon Air Drone. “Their customizable platform is a real game changer in the drone industry.” Access to the World’s Largest Dataset of Drone Imagery Creates New Opportunities for Developers DroneDeploy’s 10,000+ users across 135 countries have mapped more than 8 million acres, larger than the country of Belgium, creating the

“Businesses have been asking for a more seamless integration of drone data into their workflows, and third parties have been looking to develop solutions for our global community.” Mike Winn DroneDeploy

on the DroneDeploy platform creates a one-stop shop for all aspects of cloudbased drone data analysis. Users can now extend the power of DroneDeploy by leveraging third-party apps within their DroneDeploy interface on the web and mobile devices (iOS and Android). “We’re really excited to be a part of the growing drone ecosystem,” said Ross McKegney, platform director at Box. “Our partnership with DroneDeploy enables us to help our customers better leverage drone data for their business.” According to PwC, the emerging global market for businesses using drones is expected to top $127 billion by 2020. One company that has benefited from the drone industry’s exponential growth is FAA Part 107 certified drone service provider company, Bon Air Drone. As a result of its

world’s largest dataset of drone maps and 3D models. For the first time in the commercial drone industry, developers will monetize and easily distribute their apps within a drone data platform. Third-party, integrated apps will accelerate innovation within the industry. The inaugural apps enable: file sharing with Box, importing field boundaries from MyJohnDeere, exporting data to Autodesk, 3D printing of drone maps with WhiteClouds, on-demand flight insurance with Verifly and more. Other apps include a flight compliance app from AirMap; a roof inspection app from EZ3D; flight logging apps from DroneLogbook, Flyte, Kittyhawk, NVdrones and Skyward; and agriculture apps from Aglytix, AgriSens, Birds.ai, Skymatics, SLANTRANGE and TensorFlight. According to Nicholas Pilkington, DroneDeploy’s CTO and co-founder,

“Until now, DroneDeploy has focused primarily on solving core challenges in the drone space around flight, data collection, processing and analysis. Now we are opening up our stack so that developers can use these technologies themselves, and can focus on building specific solutions within their domain expertise without having to reinvent the wheel.” Full developer documentation for companies wanting to leverage DroneDeploy APIs to build and distribute apps can be found here. Begin Downloading Integrated Drone Apps Today The DroneDeploy App Market features free and paid apps. Pricing models for paid apps vary upon the app, from per acre for agriculture apps to per report for roof inspection apps. Once added to an account, the new app will appear integrated within the relevant location within the DroneDeploy interface on the web and mobile. For example, if an agriculture app is installed, it may only be visible when viewing the Plant Health data layer and not within other sections of the DroneDeploy interface. To see the full list of new apps visit the DroneDeploy App Market. To learn more about today’s announcement visit the DroneDeploy blog. About DroneDeploy DroneDeploy is a leading cloud software platform for commercial drones, and is making the power of aerial data accessible and productive for everyone. DroneDeploy is transforming the way businesses leverage drones and aerial data across industries, including agriculture, construction, mining, inspection and surveying. Simple by design, DroneDeploy enables professionalgrade imagery and analysis, 3D modeling and more from any drone on any device. DroneDeploy users have mapped and analyzed more than 8 million acres in more than 135 countries. DroneDeploy is located in the heart of San Francisco. For more information, visit www.dronedeploy.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONTINENTAL EQUIPMENT CORP.

ROAD MACHINERY & SUPPLIES CO.

www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

BERRY TRACTOR AND EQUIPMENT CO. www.berrytractor.com 930 S West St. Wichita, KS 67213 316/943-4246 1750 SW 41st St. Topkea, KS 66609 785/266-9509 3830 W Jones Ave Garden City, KS 67846 620/277-2290 2060 N West Bypass Springfield, MO 65803 417/831-2651

DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 89

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898

GENERAL EQUIPMENT & SUPPLIES, INC. www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

Page 90 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 91

ntoo Savings Saavvings in Shift Shiff t IInto

KUBOTA KUBO TA A SALES EVENT

www.arnoldsinc.com Arnold’s of Kimball 701 State Hwy 55 E • Kimball, MN 55353 320/398-3800 Arnold’s of Glencoe 655 Lindbergh Trail • Glencoe, MN 55336 320/864-5531 Arnold’s of St. Martin 374 Industrial Drive • St. Martin, MN 56376 320/548-3285 Arnold’s of Mankato 1715 Howard Drive • Mankato, MN 56003 507/387-5515 Arnold’s of St. Cloud 2995 Quail Rd. NE • St. Cloud, MN 56379 320/251-2585

BURRIS EQUIPMENT CO. www.burrisequipment.com 2216 N. Green Bay Rd. • Waukegan, IL 60087 847/336-1205 Fax: 847/336-2697 27939 W. Concrete Dr. • Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. • Joliet, IL 60433 815/464-6650 Fax: 815/464-6951

COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com 2329 Performance Way • Columbus, OH 43207 614/443-6541 12500 Williams Road • Perrysburg, OH 43551 419/872-7101 7570 New Carlisle Pike • Dayton, OH 45424 937/879-3154

1st CHOICE EQUIPMENT LLC www.1stchoiceequipment.com 124 N. Schmale Rd. • Carol Stream, IL 60188 630/510-6050 Fax: 630/510-6051

LANO EQUIPMENT INC. www.lanoequip.com

6140 Highway 10 Anoka, MN 55303 888/448-5266

3021 West 133rd St. Shakopee, MN 877/753-6100

23580 Highway 55 Loretto, MN 888/479-4342

MARTIN IMPLEMENT SALES, INC. www.martinimplement.com 18405 115th Avenue Orland Park, IL 60467 708/349-8430 Fax: 708/349-4230

NIEBUR TRACTOR & EQUIPMENT, INC. www.nieburtractor.com 14380 240th St. E. Hastings/Miesville, MN 55033 888/839-6860

*$0 down, 0% A.PP.R. financing for up to 60 months on purchases of new Kubota SVL Series equipment is available to qualified purchasers from participating dealers’ in-stock inventory through 12/31/2016. Example: A 60-month monthly installment repayment term at 0% A.P.R. requires 60 payments of $16.67 per $1,000 financed. 0% A.P.R. interest is available to customers if no dealer documentation preparation fee is charged. Dealer charge for document preparation fee shall be in accordance with state laws. Inclusion of ineligible equipment may result in a higher blended A.P.R. 0% A.P.R. and low-rate financing may not be available with customer instant rebate offers. Financing is available through Kubota Credit Corporation, U.S.A., 3401 Del Amo Blvd., Torrance, CA 90503; subject to credit approval. Some exceptions apply. Offer expires 12/31/2016. See us for details on these and other low-rate options or go to www.kubota.com for more information. Optional equipment may be shown.

1305 Sentry Drive • Waukesha, WI 53186 262/521-5802 Fax: 262/521-5801

ABC EQUIPMENT RENTAL & SALES INC. www.abcequipment.com 29 Pearl Rd. • Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 kubota.com

38525 Chester Rd. • Avon, OH 44011 440/934-7368

Page 92 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Key to Maintaining Fleet: Accurate, Thorough Records ANNIVERSARY from page 32

Al Caggiano, Rieth-Riley’s equipment manager, has been looking after the fleet since early 2012. “The key to maintaining a large fleet is accurate and thorough records detailing parts, labor and maintenance costs of the components of an asset class,” he said. “Our annual acquisition costs are a moving target ranging from $5 to $25 million. Operational requirements, utilization targets, life cycle and percentage of usable asset life plotted against asset market value are some of the factors considered in our purchase / replacement program. We prefer to own our construction fleet but do lease and rent when appropriate. “Using a Certified Rebuild program, some assets are capable of a second or even a third life driving down overall life-time ownership costs,” Caggiano said. “Some assets are sold based on the used market demand. Other assets required by operations for specific functions but have lower utilization numbers are kept in the fleet for many years and used until the life of the asset is exhausted. For a diverse fleet such as ours, there is no ‘one size fits all’ answer.” Vendor relationships are very important to Rieth-Riley. “The equipment manufactured today is more efficient than it has ever been because of the available technology built into each machine,” said Caggiano. “While technology has increased efficiency and productivity, it has also increased the complexity of machine diagnostics and repair. The laptop computer is now the

From gravel roads to concrete to asphalt paving, Rieth-Riley was soon building small bridges and it constructed part of the Indiana section of the coast-to-coast Lincoln Highway (U.S. 66) in the 1920s.

first line of defense for the technicians of today. “It’s not practical to purchase the software and diagnostic equipment for each equipment manufacturer we use and remain current with software and training,” he added. “We have improved our uptime and efficiency utilizing the latest diagnostic tools available through our vendor partnerships.” Caggiano said he has expectations from the dealers he works with. “Our expectations include multiple locations, 95 percent plus same day parts inventory, fully staffed service department capable of mobile service calls or block time, and a late model rental fleet. Our vendors expect open communication, honest feedback and the

opportunity to support our company. Open communication and honest feedback are fundamental for both parties to succeed. We strive to build a partnership. This allows both sides to combine their strengths and experience while identifying areas needing improvement.” Rieth-Riley does business with most of the prominent equipment dealerships within its areas throughout the Midwest. The company typically contracts its fuel delivery. Mechanics have access to a fleet of repair vehicles that carry a wide variety of tools and equipment to various types of repairs, as well as carry various fluids. Safety is ongoing focus for

Rieth-Riley and in 2015, it was awarded the Indiana Construction Association Gold Summit Award for Leadership in Construction Employee Safety. “It’s a proactive approach that revolves around becoming more aware of our surroundings, speaking up when we see at-risk behaviors, fixing hazards as we see them, and reporting those finds and fixes,” said Inniger. “We are committed to making absolutely sure that the safety of every employee is paramount. Our dedication to safety has resulted in a safety record well above the industry average. To maintain it we require that all of our supervisors receive formal safety training, including OSHA 10-hour and OSHA 30-hour cours-

The company was founded in 1916.

es in construction safety, OSHA trenching, Excavation and Soil Mechanics. As well, every supervisor receives mandatory First Aid/CPR training on a regular basis. “Employees working at our mining operations receive training in accordance with MSHA safety regulations and attend eight-hour refresher training annually,” he added. “All of our employees are required to attend weekly Toolbox Talks that cover topics specific to the construction industry and ongoing work operations within the company. Our Stretch and Flex program is second to none and is completed on a daily basis amongst all of our craft employees.” When incidents do arise on a project, Rieth-Riley’s Risk Management and Safety Team immediately launches a thorough investigation to understand what happened and take steps to avoid a future occurrence. “We’re regularly recognized by the AGC of America’s Safety Award program for having injury incident and lost time incident rates 25 percent below the national industry rates,” said Inniger, who noted that Rieth-Riley is a partner with IOSHA in its Safety Management Program. Building trust, open communication and a quality product are principles originated from the company’s founder, Albert Rieth, according to the company. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Paving

SECTION

Pages 93-104

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Terex Makes Strategic Moves for Mixer Truck Business Terex announced the completion of two strategic moves related to its front discharge mixer truck business. Within the Terex corporate structure, Terex Mixer Trucks have transitioned from the Terex Construction Americas specialty products portfolio to the Terex Materials Processing segment. The trucks join Fuchs material handlers, Terex Bid-Well automatic roller pavers, and Powerscreen, Terex Finlay, and other Terex minerals processing and washing equipment in the Materials Processing portfolio. “Terex Mixer Trucks are a longstanding and important part of the Terex business portfolio, and Terex positioned the trucks in a strong business segment where they can expand and continue to help customers meet their production goals,” said John Leech, general manager of Terex Mixer Trucks and Terex Bid-Well. “This has been a seamless transition that has not affected our mixer trucks customers. The only visible change is our new Director of Customer Engagement Strategy, Sales and Service Organization, Mark Aubry. He is an Terex Mixer Trucks have transitioned from the Terex Construction Americas specialty products portfolio to the Terex Materials Processing segment. The trucks join Fuchs material handlers, Terex Bid-Well automatic roller pavers, and Powerscreen, Terex Finlay, and other Terex minerals processing and washing equipment in the Materials Processing portfolio.

excellent addition to the Terex team and offers a wealth of sales and marketing experience for the mixer truck line.”

David Rinas, retired from the director of sales position.

Aubry Replaces Rinas Aubry replaces long-time concrete industry veteran David Rinas, who held the director of sales position since August 2008, and announced his planned retirement from the position earlier this year. Aubry now leads all customer-facing activities, including sales, service and aftermarket parts teams, and he is responsible for strategic sales planning and staffing for Terex front discharge mixer trucks. In addition, his responsibilities include the development and implementation of a strategic sales plan to enhance customer interaction, grow market share, and achieve company goals and objectives. Prior to joining the Terex mixer truck team, Aubry served as the vice president of sales and marketing of the components division of a Canadian alternative fuel transportation company. He also has led the sales and marketing teams for a multinational truck manufacturer and a Mark Aubry is the new director of customer engage- global manufacturer of aerial work platforms. ment strategy, sales and service organization.

see TEREX page 94

Page 94 • November 19, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Aubry Replaces Concrete Industry Veteran Rinas — to Lead Teams TEREX from page 93

“Dave [Rinas] successfully led the Terex truck business through one of the deepest market downturns in history and has positioned the truck segment for growth. He has left big shoes to fill,” said Aubry. “The Terex front discharge mixer truck design is solid and offers many production-enhancing features for customers. I am excited to work with our talented team and ready mix truck operators to help grow their businesses through the use of Terex mixer trucks.” Rinas’ successful and productive career spans nearly 40 years, beginning with asphalt plant and equipment manufacturer Standard Havens in 1977. His career in the cement and concrete business started in 1986. He held vice president level positions for industry giants Holcim, Lonestar Industries (Buzzi Unicem) and Lehigh Cement until 2008, when he accepted the director of sales position at Terex Mixer Trucks. During the deep economic downturn from 2009 to 2012, where the front discharge market experienced truck demand decreases by up to 90 percent, Rinas also held the position of interim general manager of the ready mix concrete truck business. While truck production was temporarily halted

from 2011 through most of 2012, Rinas led a core group of team members representing several departments to implement Lean manufacturing principles at the Fort Wayne factory and re-engineer the front discharge truck design with new customer-requested features in preparation for the market rebound. Since the temporary production stoppage, the market rebound has seen demand for Terex mixer trucks grow to anticipated production levels reaching 1,000 units in 2017. “Over the years, I have witnessed the evolution, transformation and resiliency of the construction materials and equipment business from several perspectives. I have been fortunate to have several mentors during my career and have met hundreds of friends, colleagues, and, most importantly, customers along the way,” said Rinas. “Clearly the industry will continue to transform and evolve as I depart the business, and Terex has selected the right person in Mark [Aubry] with the right experience and skills to lead the evolution of Terex Mixer Trucks to meet the market’s needs.” For more information, visit www.terex.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Heavy-Duty Conveyor Broom Boasts One-Pass, Clean-Up Capability The Roadtec CB-100 conveyor broom is a mobile, self-propelled sweeping machine designed to clean material from work sites. Conveyor brooms are used for asphalt milling, snow removal and construction site sweeping. The CB-100 offers a clean sweep system designed to yield cleanup in one pass, according to the manufacturer. The CB-100 weighs 17,000 lbs. (7,711 kg) and features an exclusive flow system design. The 32 in. (81 cm) diameter brush rotates at 150 rpm with adjustable, free-floating designs that are said to reach every crevice. The brush is 6 ft. (1.8 m) wide. Front-mounted rakes comb through material to separate and remove large debris. Strike-off blades cut material heights to manageable levels and specially designed, dual moldboards direct material to center, preventing end gate seepage and material loss. Front discharge, endless-cleated, 32 in. conveyors transfer debris away from the work zone, which may eliminate the expense of vacuum trucks. The machine features a heavy-duty frame and axles. It is powered by a low-

ROLAND MACHINERY www.rolandmachinery.com Springfield, IL 217/789-7711 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Portage, IN 219/764-8080 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Eau Claire, WI 715/874-5400 DePere, WI 920/532-0165 Deforest, WI 608/842-4151 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 2600 S. Lincoln Rd. Escanaba, MI 906/786-6920 Fax: 906/786-5813

BRANDEIS MACHINERY & SUPPLY COMPANY

The Roadtec CB-100 conveyor broom is a mobile, self-propelled sweeping machine designed to clean material from work sites. Conveyor brooms are used for asphalt milling, snow removal and construction site sweeping.

emissions, 99 hp Kubota Tier-IV interim engine and the hydrostatic transmission is designed to provide smooth controlled acceleration for all speeds. The brakes are oil-bathed and sealed, which is intended to extend wear life, according to the manufacturer. The CB-100 conveyor broom features folding end-gates, which allow for quicker brush changes during operation. Grease points, filters, and the electrical system are in locations

designed to be easy to access. The machine’s operator cabin is pressurized, dust-free, climate controlled and ROPS certified. Plush seats, sliding seat options, windshield wipers and fingertip control panels are designed to provide comfort and optimized visibility. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.brandeismachinery.com 17000 Highway 41 N Evansville, IN 47725 812/425-4491 7310 Venture Lane Fort Wayne, IN 46818 260/489-4551 8410 Zionsville Road Indianapolis, IN 46268-1524 317/872-8410 1801 Watterson Trail Louisville, KY 40299 502/491-4000 1484 American Greeting Card Road Corbin, KY 40701-4813 606/528-3700 1389 Cahill Drive Lexington, KY 40504-1167 859/259-3456 160 County Park Road Paducah, KY 42001 270/444-8390

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 19, 2016 • Page 95

5300 A ASPHALT SPHAL AL LT PAVER P PA AVER THE INDUS INDUSTRY’S TRY’S NEWEST NEWEST COMPACT C COMP OMP PACT PAVER P PA AVER Handles the material load of a standard paver while maintaining the ability to fit into tight spaces Large capacity material hopper gives this compact paver Large great agility and versatility Designed for trench, utility utility,, patch, path, mill and fill work Tier 4 Final diesel engine Ultra-efficient material management system reduces hand work and increases productivity Proven L egend HD mini electric screed technology Legend

LeeBoyy 5300 Asphalt p Paver 48 inch width for paving tighter trench areas

L eeBoy equipment manufactured in the US A LeeBoy USA

www.leeboy.com

CASEY EQUIPMENT COMPANY

RMS RENTALS

ROAD MACHINERY & SUPPLIES CO.

www.casey-equipment.com

www.rmsrentals.com 12520 Quentin Ave S. Suite 100 Savage, MN 55378 952/895-9595 800/888-9515

www.rmsequipment.com

1603 East Algonquin Rd. Arlington Heights, IL 60005 847/437-8686 Fax: 847/437-8738

16754 New Ave. Lemont, IL 60439 630/257-1261 Fax: 630/257-0614 1548 Huntwood Drive Cherry Valley, IL 61016 815/332-8222 Fax: 815/332-3056

5633 W Hwy 13 Savage, MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535

Virginia, MN 218/741-9011 800/752-4304 Negaunee, MI 906/475-6488 800/888-9565

Sioux City, IA 217/252-0538 800/633-9104 Des Moines, IA 515/282-0404 800/555-1445

Cedar Rapids, IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

Page 96 • November 19, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Introducing the GP3, the World’s Most Intelligent Paver Announcing Our New Distributor in Arizona

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347

ROAD MACHINERY & SUPPLIES CO.

SWANSTON EQUIPMENT COMPANY

BERRY TRACTOR AND EQUIPMENT CO

www.rmsequipment.com Des Moines, IA 515-282-0404 • 800-555-1445 Sioux City, IA 712/252-0538 • 800/633-9104 Cedar Rapids, IA 319-363-9655 • 800-616-6615 Milan, IL 309-787-1742 • 800-633-9114

www.swanston.com 3450 West Main Fargo, ND 58103 800-369-0371 3915 Burdick Expressway E. Minot, ND 58703 800-210-8766

www.berrytractor.com 930 S West St. Wichita, KS 67213 316-943-4246 1750 SW 41st St. Topeka, KS 66609 785-266-9509 3830 W Jones Ave. Garden City, KS 67846 620-277-2290

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 19, 2016 • Page 97

Page 98 • November 19, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 25 Years 2006 Blaw Knox PF 5510 track paver, Omni IIIE 10-18 ½ ft electric heated screed, Cummins diesel engine, power crown & slope, Ultra 3 auger sensors, power auger tunnels

2008 Etnyre Centennial II distributor, 2000 gallons, computer w/1 ft cut-offs, propane heat, 12 ft spray bar, 2004 Etnyre tanker distributor, 6500 gallons, computer Sterling L7500 w/Cummins dsl eng, 6 spd auto trans, 2 & control box & radar, propane burners, Hatz diesel engine, 12 ft spray bar spd axle

www.sakaiamerica.com (800) 323-0535

Finkbiner Equipment Co. 15 W 400N Frontage Rd. Burr Ridge, IL 60527 630-654-3700 Fax: 630-654-3792 www.finkbinerequipment.com

Highway Equipment Company 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411 www.highway-equipment.com

CMW Equipment

2010 Cat AP1000D paver, AS2302 screed 10-18 ft w/electric heat, Cat C7 diesel engine, power crown, slope & height, spray down hose & reel, self lubing system, power auger tunnels, front wheel assist (2008 also avail)

2002 Etnyre Centennial distributor, 2000 gallons, computer w/1’ cut-offs, diesel heat, 14’ spray bar, Sterling truck w/Cummins diesel, 5 spd trans, 2 spd axle

2004 Ferguson SP912 pneumatic roller, 9 wheels, J.D. diesel engine, water system, hydrostatic drive (Bomag 9 wheel also available)

2002 Blaw Knox PF 3200 paver, Ultimat 10-20 electric heated screed, power crown , slope & height, front wheel assist, Cummins 5.9L diesel engine (2005 yr models also available)

New Marathon TPS250T tack distributor, Honda gas eng, 10GPM pump, 250 gallons, 5’ spray wand w/40’ hose, 10" filler lid, hose reel, propane burners, flushing system, electric brakes, pintle hitch (some w/spray bars)

2002 Rosco Maximizer II distributor, 1950 gallons, EZ-2S computer w/1 ft cut-offs, 12 ft spray bar, diesel heat, Freightliner FL-70 w/Cat 3126 dsl eng, 5 spd trans, 2 spd axle

8668 Olive Blvd. St. Louis, MO 63132 314-993-1336 Fax: 214-993-1467 www.cmw-equip.com

3517 Wayne White Rd., Climax, NC 27233

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 19, 2016 • Page 99

Our rollers are pretty basic. Basically perfect. BOMAG improves on perfection with the BW120AD-4 roller. Want a roller that will finish the job better, faster and more efficiently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG. To do the best job, you need the best equipment. To learn more visit www.bomag-americas.com, or call 1-800-78-BOMAG today.

THE COMPACTION EXPERTS

www.miller-bradford.com W250 N6851 Hwy 164 Sussex, WI 53089 262-246-5700 262-246-5719 Fax DeForest, WI 608-222-9191

Eau Claire, WI 715-832-3443 De Pere, WI 920-338-5800 Marathon, WI 715-443-6600 Negaunee, MI 906-475-4181

10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 www.southeasternequip.com Evansville, IN 47715 812-476-7321 Fort Wayne, IN 46808 260-483-8868 Indianapolis, IN 46268 317-872-4877

Burlington, KY 41005 859-586-6133 Holt, MI 48842 517-694-0471 Novi, MI 48374 248-349-9922 Brilliant, OH 43913 740-598-3400 Brunswick, OH 44212 330-225-6511

Dublin, OH 43016 614-889-1073 Gallipolis, OH 45631 740-446-3910 Heath, OH 43056 740-522-3500 Mansfield, OH 44903 419-529-4848 Marietta, OH 45750 740-374-7479

Mentor, OH 44060 440-255-6300 Monroe, OH 45050 513-539-9214 North Canton, OH 44720 330-494-3950 Perrysburg, OH 43551 419-874-0331 Troy, OH 45373 937-416-6397

www.westsidetractor.com 1400 W. Ogden Ave. Naperville, IL 60563 630-355-7150 Rockford, IL 815-961-3160 South Holland, IL 708-331-6362 Wauconda, IL 847-526-7700 Rockdale, IL 815-730-9011

www.berrytractor.com 930 S West St. Wichita, KS 67213 316-943-4246 Topeka, KS 66609 785-266-9509 Garden City, KS 67846 620-277-2290 Springfield, MO 65803 417-831-2651

Page 100 • November 19, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Cedarapids Paver Advances Durability, Improves Comfort

Boasting a low, 21-psi fully loaded ground contact pressure, the CR662RM can be used on all paving lifts, including the critical base layer, to virtually eliminate all forms of material and thermal segregation.

The rubber track Cedarapids CR662RM RoadMix from BOMAG features a new 260 hp (191 kW) Tier IV Final Cummins diesel engine that delivers the power needed for high production applications. Boasting a low, 21-psi fully loaded ground contact pressure, the CR662RM can be used on all paving lifts, including the critical base layer, to virtually eliminate all forms of material and thermal segregation. Unlike MTVs with empty wheel loads in excess of 75 psi, the low-psi rubber track RoadMix machine does not cause rutting on the base layer, can cross bridges fully loaded and is transported to the job site like a 10-ft. (3 m) paver, so contractors can finish mainline and airport paving applications quickly, efficiently and with high mat quality, according to the manufacturer. Replacing the traditional in-hopper slat delivery system, the improved Remix anti-segregation system delivery augers now feature hard-faced back sides to significantly increase wear life. The two sets of two variable-pitch, counter-rotating augers uniformly draw down material from inside the hopper to aggressively remix 100 percent of the asphalt to combat segregation at the job site. Auger pitch spacing transitions from 10 in. (25.4 cm) at the front of the hopper to 12 in. (30.5 cm) at the rear to quickly channel material to the transfer conveyor or screed. This design results in throughput capacities in excess of 600 tph (500 t) whether equipped as a paver or MTV.

A new platform design increases the operator’s line of sight to the RoadMix’s sides, enhancing comfort and productivity. The operator’s seat now pivots beyond the machine’s side for unimpeded track visibility, while the revamped operator’s console also pivots to line up with the seat. A sloped engine hood improves the operator’s sightline to the hopper. The generator powering the electric screed is now positioned away from the screed, lowering sound levels to the screed operator’s ears to further improve comfort. Whereas most MTVs sit idly by more than 75 percent of the time, the unique CR662RM RoadMix design substantially improves a contractor’s return on investment. In less than 4 hours, crew members can quickly remove the rear conveyor assembly used for transferring material from the tractor and replace it with the screed assembly, according to the manufacturer. “If necessary, a contractor could pave with the RoadMix in the morning and use it as an MTV in the afternoon,” said Henry Polk, product marketing manager — paving products of BOMAG. “This is one machine that will rarely sit in a contractor’s yard.” The Cedarapids CR662RM RoadMix now comes standard with 3 years of complementary BOMAG Telematic service. BOMAG Telematic monitors machine vitals, delivers text and email alerts to key personnel, reminds the dealer and service technicians when scheduled maintenance tasks

are due, and offers a number of productivity reports to help maximize machine utilization. “Even at full load,” added Polk, “Telematic is showing us that the CR662RM uses only an average of 5 gal [19 L] per hour.” Smartrac technology extends the CR662RM RoadMix’s track life, warranted for 3 years/3,000 hours. Oscillating bogie wheel assemblies combine with the system’s frictionally driven rubber tracks to automatically apply the correct tension to the track, regardless of traveling in forward or reverse. The self-tensioning system does not over tension the track, significantly prolonging track life, according to the manufacturer. When equipped as an MTV, the CR662RM’s 30-in. (76.2 cm) wide conveyor offers a discharge height of 73.2 to 115.8 in. (186 to 295 cm) for non-contact paving and swivels 55° left or right of center for off-set paving. For mainline paving, the CR662RM can be equipped with either the Stretch 20 or Fastach 10 screed and is capable of paving at widths reaching up to 30 ft. (9.1 m). Two independently controlled, variable-speed outboard drive motors eliminate the need for the spread auger center gearbox drive to reduce the occurrence of centerline segregation. For more information, visit www.bomag.com/us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 19, 2016 • Page 101

A WIRTGEN GROUP COMPANY

POWERFUL PERFORMANCE. JUST TAKE YOUR PICK. MOBICAT MC 110 EVO

MC 110 R EVO I MC 110 Z EVO

EFFICIENT HIGH ACHIEVERS IN TWO VERSIONS. Whether you opt for the MC 110 EVO Z with its independent double-deck prescreen, or the R-version with its vibrating feeders and integrated slotted grate – the crushing unit with its elevated crushing jaw ensures optimal material feed and an impressively high crushing capacity of up to 330 t/h for both systems. Combined with their innovative and cost-effective diesel-directdrive concept and exceptional transportability, powerful performance is guaranteed. The MOBICAT MC 110 EVO.

www.kleemann.info

BRANDEIS MACHINERY & SUPPLY COMPANY

ROLAND MACHINERY www.rolandmachinery.com DePere WI 920/532-0165 Deforest WI 608/842-4151 Franksville WI 262/835-2710 Schofield WI 715/355-9898

Eau Claire, WI 715/874-5400 Escanaba MI 906/786-6920 Springfield, IL 217/789-7711 Marengo, IL 815/923-4966

Bolingbrook IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Bridgeton, MO 314/291-1330

www.brandeismachinery.com Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Portage, IN 219/764-8080

1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 Evansville, IN 812/425-4491 • Fax 812/425-1171

Corbin, KY 606/528-3700 • Fax 606/528-9014 Lexington, KY 859/259-3456 • Fax 859/254-0783 Stanville, KY 606/478-9201 • Fax 606/478-9208

Paducah, KY 270/444-8390 • Fax 270/575-4907 Indianapolis, IN 317/872-8410 • Fax 317/872-8417 Ft.Wayne, IN 260/489-4551 • Fax 260/489-1620

Page 102 • November 19, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

# 032515-ACC

WE LOOK AT THINGS FROM WHERE YOU’RE SITTING Dynapac pavers. Designed for your comfort, visibility and uptime. World of Concrete booth C4303 CONEXPO-CON/AGG Central Hall C3-C5 - booth C31486 800-732-6762 | www.atlascopco.us

Contact your local dealer: McAllister Equipment Co. 12500 S. Cicero Ave. Contact Alsip, IL 60803your local 708.389.7700 VillaDealer Park, IL 630.530.7600

Name

Rockford, IL City, ST 815.227.0555

Road Machinery & Supplies Co. 5633W Hwy 13 dealer: Savage, MN 952.895.9595 800.888.9515 Duluth, MN 218.727.8611 800.888.9535

East123.456.7890 Peoria, IL 309.694.4455

Virginia, MN 218.741.9011 800.752.4304

Springfield, City, STIL 217.789.0351 123.456.7890 www.mcquipco.com

Cedar Rapids, IA 319.363.9655 800.616.6615

City, ST

CMW Equipment 123.456.7890 8668 Olive Blvd. St. Louis, MO 63231 314.993.1336 City, ST Fax 314.993.1467 www.cmw-equip.com 123.456.7890

Track DENSITY IN REAL TIME. PASS:

TEMPERATURE:

250°

D E N S I T Y:

PA S S :

TE M P E RATURE :

220°

DENS I T Y:

95.1%

94.2%

PASS:

TEMP ERAT U R E:

270°

DE NSI T Y:

92.6%

Des Moines, IA 515.282.0404 800.555.1445 Sioux City, IA 712.252.0538 800.633.9104 www.rmsequipment.com

Volvo Intelligent Compaction (IC) with Density Direct. Volvo has changed the game. Density Direct provides actual density calculations in real time — eliminating guessswork work and reducing core sampling. Improve mat quality, do it in less time, get your bonus, and win more contracts with V Volv olvo Density Direct.

DE DEALER ALER LOGO

Learn more at volvoce.com/DensityDirrect. ect ec

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • November 19, 2016 • Page 103

Precision Spray

1750-C

MT-300

MAULDIN Paving Products offers a full line up of necessary equipment for contractors who desire quality results. The versitle M413XT offers a compact design for operation in tight areas, while also offering the best grading capabilities in its class. )URQW DQG UHDU TXLFN DWWDFKPHQW DQG K\GUDXOLF FRQQHFWLRQV PDNH WKLV XQLW WKH PRVW SUDFWLFDO DVVHW IRU \RXU À HHW

MAULDIN Paving Products... MASTERS OF THE MAT! Contact your MAULDIN dealership today and review all the choices available from the MAULDIN M413XT 2I¿ FLDO &DWDORJ WR VSHF RXW D 0 ;7 WKDW SHUIHFWO\ PDWFKHV \RXU SHUVRQDO SUHIHUHQFHV

15 W 400 North Frontage Road Burr Ridge, IL 60527 Ph: (630) 654-3700 Fax: (630) 654-3792 www.finkbinerequipment.com

2055 S 108th Street Milwaukee, WI 53227 Ph: (414) 541-8700 Fax: (414) 541-1892

2400 N 14th Avenue Wausau, WI 54401 Ph: (715) 675-6900 Fax: (715) 675-9748 www.amstate.com

820-A Moasis Drive Little Chute, WI 54140 Ph: (920) 788-6646 Fax: (920) 788-6753

Page 104 • November 19, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

MAXIMIZER 3 DIS DISTRIBUTOR TRIBUTOR DELIVER A ACCURATE, CCURATE, UNIFORM APPLICATIONS APPLIC PLIC CA ATIONS Extending spraybar allows for seamless transitioning from 8 to 16 feet spraying to handle intersections, obstructions, lane drops and more! Designed for tack coating a road’ road’ss surface in front of an asphalt paver or chip spreader Whether curved or straight, the MAX3 will deliver accurate and uniform application from start to finish Spray bar width adjustment on the fly with in-cab automatic controls Semi-automated Enviro-flush clean out system

Max 3 Asphalt Distributor EZ spray extendible extendible spraybar spraybar,, 8 to 16 feet

LeeBoy USA L eeBoy equipment manufactured in the US A www.leeboy.com

www.rolandmachinery.com

www.rjequip.com

DePere, WI 920/532-0165

Eau Clair, WI 715/874-5400

East Peoria, IL 309/694-3764

Palmyra, MO 573/769-2056

Deforest, WI 608/842-4151

Escanaba, MI 906/786-6920

Bridgeton, MO 314/291-1330

Portage, IN 219/764-8080

Franksville, WI 262/835-2710

Springfield, IL 217/789-7711

Cape Girardeau, MO 573/334-5252

Schofield, WI 715/355-9898

Carterville, IL 618/985-3399

Columbia, MO 573/814-0083

3024 – 4th Street, S.E. Minneapolis, MN 55414 612-378-9558

www.rmsequipment.com 100 Sheridan Ave. Des Moines, IA 50313 515/282-0404 800/555-1445

1400 North Hwy 75 Sioux City, IA 51105 712/252-0538 800/633-9104

2525 16th Ave SW Cedar Rapids, IA 52406 319/363-9655 800/616-6615

606 W. 10th Ave. Milan, IL 61264 309/787-1742 800/633-9114

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 105

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 23-24 EB 614-395-4064

2010 332D John Deere 89 HP, 202 Hrs, 2 Speed A/C Joystick Controls .................................$44,900 Call MN Equipment 763-428-4107 24-25 PK

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 24-25 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 24-25 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 24-25 DH

1995 Fiatallis FR130.2, Cab w/Heat, 139 HP Turbo Diesel ...............................................$24,250 24 JM Call Steve 262-373-2151

2010 Link-Belt 350 X2, Cab w\AC, 10’8” stick with 36’8” reach and 24’1” dig depth ...............$104,600 Call Steve 262-373-2151 24 JM

2014 Takeuchi TL10, 92 hp T4i Kubota Diesel, 2 speed travel, aux hydraulics.......................$41,010 Call Steve 262-373-2151 24 JM

2015 Kawasaki 70Z7, 168 hp Cummins, JRB coupler, cab w/AC ..........................................$149,000 Call Steve 262-373-2151 24 JM

2005 Sterling LT9500, Mercedes engine, 329K, 410HP, Automatic, 18' Barrel Bed, Stock #15205... ....................................................................$75,500 Call Dave at REED Company 23-24 JM 620-340-7953

2002 Sterling LT9500, 218K, C12, 410 HP, 16' Elliptical bed, Stock #15152 ......................$62,500 Call Dave at REED Company 620-340-7953 23-24 JM

2004 Kenworth T300, 195K, C7, 250HP, with an 11' Dump Bed .............................................$39,750 Call Dave at REED Company 23-24 JM 620-340-7953

2002 International 2674, 244K, DT530, 330HP, 8spd, with 16' Barrel Bed ..........................$54,500 Call Dave at REED Company 23-24 JM 620-340-7953

2004 Cat 330CL Excavator, 9132 Hrs, 247 HP C-9 Diesel, 12’9” Stick, 60” Bkt, Extra CounterWeight for Heavy Lifting, Cab w/Heat & AC, AM/FM, and Fresh Epoxy Paint. This is an aboveaverage leak free machine. A must see .....$55,000 Call Mike Pieper 319-470-8388 24-25 PK

2006 Cat XQ-80 Generator, 8146 Hrs ...........$19,000 Albert Medcalf or Marcela Newman 24-25 EB 502-456-4050

2010 Bobcat E80, 3565 Hrs, 57 HP, 2-Speed Drive, 18” Digging Bucket, 24” Digging Bucket .........$49,500 Call George 219-696-8911 23-24 JM

2014 Terex TSV70 Skid Steer Loader, Vertical Path, 74hp, 2-Speed, Hyd-Quick-Tach 129” Hinge ........$36,600 23-24 EB Call Tania 614-443-9751 x237

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 23-24 TM

2004 Takeuchi TL140, 2546 Hrs, Cab & Heat ............ ..........................................................................$26,166 Top Notch Equipment, Inc. 888-824-6559 23-24 PK

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

Page 106 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

2006-2010 Ingersoll Rand DD-118HF & DD-138HF 1999 Dynapac SP-CC-102 Dual Drum Vibratory 2012 Volvo MT2000 Milling Machine, Cummins Roller, #7137 ...............................................$6,500 610HP Tier 3 Dsl, 86” Keystone Cutter ....$275,000 Compactors, Various Units to Choose From! 23-24 JM 23-24 JM 800-283-1336 800-283-1336 23-24 JM 800-283-1336

2009 Volvo MW500 Milling Machine, 20” Wide Cutter, Deutz Diesel Eng, Rear Conveyor.$115,000 23-24 JM 800-283-1336

2013 Doosan DX235LCR, s/n 005454, 2098 Hrs, One-Way/Two-Way Aux. Hydraulics, Quick Latch.... ..................................................................$115,000 Call David 219-696-5680 24-25 JM

2006 Case 580SM, s/n N6C412119, 4600 Hrs, Cab w/Heat & AC, 4WD, Ext-Hoe, Ride Control, Two Lever, 82” Bkt, 12” and 24” Bkt...........$40,500 24-25 JM Call Dennis 630-774-8830

Case 410, s/n N8M494216, 1455 Hrs, ROPS, Manual Coupler, New Engine @ 1415 Hrs, 10x16.5 Tires, 66” Bkt .................................$14,000 24-25 JM Call Steve @ 630-878-8765

Case 580L, s/n JJG0247133, Cab w/Heat, Two Lever, Ext-Hoe, 4WD, 18” Backhoe Bkt, 82” Front Bkt ..............................................................$23,500 23-24 JM Call Steve @ 630-878-8765

2001 Grove TMS 500E, 40 Ton, 95’ Main Boom, 26’-45’ Jib, 3 Sheave Block, 68,000 Miles, 10,112 Hrs, 1 Owner Machine, Fresh Grove Paint, Cleveland, Ohio .............................................CALL Call Andy Forepaugh 216-316-1511 24-25 EB

2012 Pete Equipped w/Rear Mount National 9125 WA-WL, 26 Ton, 125’ Main Boom, 500 HP Cummins, 10 Speed Eaton Transmission, 18’ Bed, Steerable Lift Axle, 39,000 Miles, 5150 Hrs, Cleveland, Ohio .............................................CALL Call Andy Forepaugh 216-316-1511 24-25 EB

Ford 455 Diesel Tractor Front Loader, Rear Dragbox, Removal Teeth, Roof Cover, 1200 Hrs, Used by Owner, Very Good Condition 24-25 AP Call Bob 734-972-9658

2009 Cat 420E, County Machine, Cab, A/C, 4-in-1 Loader ........................................................$55,000 Call Mark 785-823-6378 23-24 JM

2005 FECON FTX90L with Rear Winch, 1450 Hrs ....................................................................$35,000 23-24 JM Call Mark 785-823-6378

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, Quick Coupler ..........................................................$135,000 Caleb Hinkkanen 800-456-4005 Ext. 143 23-24 PK

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 23-24 JM

SEE YOUR BARGAIN AD IN

COLOR

ONLY $50 EXTRA FOR TWO INSERTIONS

Here's how the BARGAIN ADS Work: • • • •

Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. Cost is $115 per ad, $50 additional for color. Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 107

CLASSIFIEDS CrAnes Boom Cranes 2003 national 18103, 40 Ton, 103' of hyd. stick, 31' to 55' jib, heater, joy stick controller, Used condition, wireless remote, 5,417 hours ................ ................................$189,900. Aspen equipment Co. 952-888-2525

eQUIPMent DeCALs engInes equipment Decals rePLACeMent DeCAL sets for Construction, Forestry, and Industrial equipment. safety Decals.

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

Call 215-536-5339 Email: info@CustomServices Company.com www.QuipCal.com

eXCAVAtors Mini excavators

MAterIAL HAnDLers Material Handlers 2006 sennebogen 825M C Series, mag box, K13 reach, fair condition, 15,000 hrs ........ ..................................$50,000.

2014 Doosan DX63, Hydraulic quick coupler & one bucket, excellent condition, 250 hours ..........................................Call

gibson Machinery, LLC

440-439-4000 gibson Machinery, LLC

reCYCLIng eQUIPMent

LoADers

440-439-4000

screening Plants

Would you like

YOUR COMPANY featured in Construction Equipment Guide?

Prompt, Knowledgeable Service. Great Prices. We are the Heavy equipment Decal experts.

Bobcat of st. Louis 314-402-4491

2005 Fintec 542, Portable double deck screen plant, good condition, 1,086 hrs ..$57,000.

614-949-9296

ONLY

$40

470 Maryland Drive, Fort Washington, PA 19034

2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

You must have a classified print ad to do so.

Call 800-523-2200

or go online to place your ad www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

ohio CAt

ELFA Survey: New Business Volume for Sept. Up From 2015 The Equipment Leasing and Finance Association’s (ELFA) Monthly Leasing and Finance Index (MLFI-25), which reports economic activity from 25 companies representing a cross section of the $1 trillion equipment finance sector, showed overall new business volume for September was $9.4 billion, up 12 percent year-over-year from new business volume in September 2015. Volume was up 22 percent month-tomonth from $7.7 billion in August. Year to date, cumulative new business volume decreased 4 percent compared to 2015. Receivables over 30 days were 1.31 percent, relatively unchanged from the previous month and up from 1.10 percent in the same period in 2015. Charge-offs were 0.46 percent, up from 0.44 percent the previous month. Credit approvals totaled 76.6 percent in September, down slightly from 76.9 percent in August. Total headcount for equipment finance companies was up 3.8 percent year over year. Separately, the Equipment Leasing & Finance Foundation’s Monthly Confidence Index (MCI-EFI) for October is 56.0, an

Construction Equipment Guide is THE Place to List It!

If so, please contact us:

track Loaders takeuchi tL140 Track Loader, S/N 21403980, New trade, Cab w/ Heat & AC, Tooth bucket, Good condition, 3,008 hours .. ..................................$28,000.

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL?

increase from the September index of 53.8. ELFA President and CEO Ralph Petta said, “September new business volume was strong, showing the first double-digit increase in many months. Perhaps the Fed’s decision to keep interest rates low has contributed to this favorable environment for equipment investment by businesses. The uncertainty caused by the upcoming Presidential election, which has acted as a drag on overall economic growth and low capital spending for most of this year, seems to have waned — at least in the short-term.” Stan Walker, managing director, JPMorgan Equipment Finance, said, “The September MILFI-25 data reflected a nice bump in volume activity, although it’s yet to be seen if this is a trend or an anomaly. Despite the unclear environment, our firm has seen strong volume growth for the year and our portfolio credit metrics remain solid. For more information, visit www.elfaonline.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

EMPLOYMENT OPPORTUNITY POWER YOUR FUTURE WITH DEUTZ DEUTZ Power Center Midwest is expanding its reach! Immediate Full Time Opportunities:

Chicago, IL: District Sales Manager North Kansas City, MO: Production Supervisor Warranty Administrator St. Louis, MO: District Sales Manager Parts Logistics Specialist Shop Service Technician

Generous Benefits 401k Match Competitive Pay Apply Immediately:

deutzamericas.com/ employment

Page 108 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: KOEHRING 505 BACKHOE LOOKING FOR KOEHRING 505 BACKHOE FOR PARTS, RUNNING OR NOT, ALSO INTERESTED IN OLD PARTS INVENTORY FOR 505. CONTACT: ALBERT HARLOW (PH: 267-738-5984) EMAIL: HARLOWCONTRACTING@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: GRAPPLE VOLVO 360 EXCAVATOR GRAPPLE FOR VOLVO 360 THAT HOOKS TO VOLVO S2 QUICK COUPLER CONTACT: KEVIN SANSALONE (PH: 856 692-0027) EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– WANTED: NEEDED TRUCK 830 E KOMATSU 2011 AND UP 5 TRUCK 793D CORE 40000 HOURS AND UP BUDGET 215000.00US NOT MORE AFTER NEEDED TRUCK KOMATSU I NEED 10 TRUCK 830E 2011 AND UP UNDER 12000 HOURS BUDGET 615000.00US EACH FROM USA ONLY NOT ADVERTISED ONLY DIRECTLY NO SALEMAN NO INTERNET OR PAST MINING ONLY CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: WANTED:DEERE ENGINE CORES NEED DEERE 6414 AND 6068 ENGINE CORES AND PARTS ENGINES WITH VEE BELT DRIVE CONTACT: SANDY LAKE DIESEL (PH: 724 253 3450) EMAIL: SANDYLAKEDIESEL@GMAIL.COM FAX: 724 253 4394 –––––––––––––––––––––––––––––––– WANTED: WE BUY EQUIPMENT MANUALS WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT (NOT INCLUDED TRUCKS AND VEHICLES) OF ALL SORTS. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES (PH: 270-849-2270) EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: KOMATSU HD605-7 WANT TO BUY 5 KOMATSU HD605-7 2008 AND UP MODEL WITH LOW HOURS IF YOU HAVE ANY PLEASE EMAIL ME PICTURES AND DETAILS. WHOLESALE PRICE ONLY!!! CONTACT: ABDAL HAJI SALEEM (PH: 415-687-0337) EMAIL: HAJICONSTRUCTEST@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED: WANT TO BUY CONSTRUCTION MACHINE OUR COMPANY WANT TO BUY CONSTRUCTION MACHINES, IF YOU HAVE ANY KIND OF MACHINE PLEASE OFFER ME. DOOSAN DX14W - VOLVO 135W, 145W HITACHI EX100WD- DAEWOO SOLAR S130W, S140W, SAMSUNG MX135 DYNAPAC, 251D,252D, 301D, 302D CONTACT: EJAZ AHMAD (PH: 3008859412) EMAIL: GEOIMPEX.EJAZ@GMAIL.COM FAX: 3008859412 –––––––––––––––––––––––––––––––– WANTED: CAT MOTOR GRADER 140G I AM LOOKING TO BUY CAT MOTOR GRADERS 140G.IF YOU HAVE FOR SALE. PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: NAQIB KHAN (PH: 03458818803) EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D10T BULLDOZER D10T ENC CAB WITH RIPPER UNDER 3000 HOURS USA ONLY AFTER I HAVE BULLDOZER D11T 2010 WITH UNDER 3000 HOURS I NEED 620,000.00NEG CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: MEDIUM DUTY TRUCK FREIGHTLINER M2 26K GROSS VEHICLE WEIGHT AUTOMATIC TRANSMISSION AIR BRAKES CONTACT: KEVIN MANGANARO (PH: 302 225 7276) EMAIL: KMANGANARO@BAYSHORETRUCKS.COM FAX: 302 652 5358 –––––––––––––––––––––––––––––––– WANTED: KOMATSU WA320-5 CLEAN WORK READY MACHINE WITH 5000 OR LESS HOURS DASH 5 ONLY MACHINE CONTACT: RICHARD (PH: 603 828-6100) EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: SMALLER ENCLOSED TRAILER NEED A SMALLER ENCLOSED UTILITY/SPORT TRAILER 1000- 1500 LB. CAPACITY TOTAL CONTACT: DIANE LAMBRO (PH: 973-875-7181) EMAIL: DIANE@STANDARDELEVATORCORP.COM FAX: 973-340-8458 –––––––––––––––––––––––––––––––– WANTED: CATERPILLAR 330BL CAT EXCAVATOR 330BL IF YOU HAVE ANY PLEASE SEND ME PICTURES AND DETAILS. CONTACT: ABDAL HAJI SALEEM (PH: 415-687-0337) EMAIL: HAJICONSTRUCTEST@GMAIL.COM FAX: 96663312326 ––––––––––––––––––––––––––––––––

WANTED: CELLULOSE FIBER MANUFACTURER BLOWER COOL MACHINE AND BAGGER AND PLANT CONTACT: GARRY EMAIL: GARRY@ECOFIBRA.NET –––––––––––––––––––––––––––––––– WANTED: DOOR FOR 161 KUBOTA MINI EXCAVATOR NEED COMPLETE DOOR FOR 2008 161 KUBOTA MINI EXCAVATOR. CONTACT: ROBERT (PH: 828-837-8986) EMAIL: TFREALTY@DNET.NET –––––––––––––––––––––––––––––––– WANTED: SNOW WING FOR JOHN DEERE 772G OR 872G MOTORGRADER WE ARE LOOKING FOR A SNOW WING FOR A JOHN DEERE 772G OR 872G MOTORGRADER. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. CONTACT: MARK OR JOHN (PH: 519-686-1123) EMAIL: SALES@MARCELEQUIPMENT.COM –––––––––––––––––––––––––––––––– \WANTED: BOMAG BW24R PARTS PLEASE CONTACT ME BY MY EMAIL. WE HAVE A BOMAG BW24R PARTS NEED TO PURCHASE. PLEASE CONTACT ME AS SOON AS POSSIBLE. THANKS. CONTACT: HONGYA (PH: 15901559975) EMAIL: JLW0001@126.COM FAX: 010-69297410 –––––––––––––––––––––––––––––––– WANTED: HITACHI EX200 AND EX400 I AM LOOKING TO BUY HITACHI EX400 AND EX200 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 2817270415 –––––––––––––––––––––––––––––––– WANTED: JOHN DEERE 595D I AM LOOKING TO BUY JOHN DEERE 595D EXCAVATOR IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– CRANE PARTS FOR ALL TYPES OF CRAWLER CRANES, AMERICAN, TEREX, MANITOWOC, LINK BELT, BUCYRUS ERIE, CONTACT: DAVE ANTONELLI PH: 216-531-8000 EMAIL: ACREQUIPMENT@CS.COM FAX: 216-531-8852 –––––––––––––––––––––––––––––––– WANTED: AIR ASSIST STEERING LOOKING FOR AIR ASSIST STEERING FOR B MODEL MACK OR ANY OTHER TRUCK CONTACT: ROBERT CARTER PH: 610-377-0372 EMAIL: CARTER5586@YAHOO.COM ––––––––––––––––––––––––––––––––

WANTED: NEEDED BULLDOZER D11T CD «2« BULLDOZER D11T CD «OR CARRIAGE DOZER ONLY« WITH RIPPER UNDER 8000 HOURS FOR BIG JOB NOT ADVERTISED PLEASE ONLY CARRIAGE DOZER 2013AND UP CONTACT: JEAN MAURICE BOUTIN (PH: 1 450 346 8975 OR 1 514 386 8975) EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: CASE 450 CRAWLER COMPLETE STONE GUARDS LOOKING FOR USED SET OF BOTTOM ROCK GUARDS FOR 450 CASE CRAWLER LOADER SER.NO. 3062213 CONTACT: ROGER (PH: 5706393058) EMAIL: ROGERPF1@FRONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED: VSI CRUSHER PORTABLE OR STATIONARY BARMAC WANTED: NEEDED TRUCK 793D CORE OR REMCO VSI FAST. NEEDED TRUCK 793D I NEED 10 CONTACT: JOE (PH: 724-944-5569) AT 12 BUT MUST BE NOT ADVERTISED EMAIL: FJS-1@ATT.NET I NEED TRUCK 793D CORE ONLY –––––––––––––––––––––––––––––––– CONTACT: JEAN MAURICE BOUTIN WANTED: JENBACHER GAS PH: 1-450-346-8975 OR 1-514-386-8975 GENERATOR EMAIL: JEANMAURICEBOUTIN@ JENBACHER GAS GENERATOR 1400 VIDEOTRON.CA KW 50 HZ. IF YOU HAVE ANY, PLEASE –––––––––––––––––––––––––––––––– SEND FULL DETAILS, PICTURES AND WANTED: LOG SKIDDER PRICE. JOHN DEERE SKIDDER 340,440,540 CONTACT: VICTOR LEBRON MUST BE IN GOOD SHAPE (PH: 864-574-0404) CONTACT: JOHN EMAIL: APESALES@AMERICANPLANEMAIL: BLOSSBURGGRANDPA@ TANDEQUIPMENT.COM GMAIL.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: PARTS WANTED: CAT MOTOR GRADER 140G FLOOR PANELS FOR CAT 922B 94A ORIGINAL PAINT, NO CRACKS OR CONTACT CHRIS 201 370 5170 WELDS, MUST HAVE RIPPER CONTACT: CHRIS COLABELLA CONTACT: WASIM KHAN (PH: 201 370 5170) (PH: 832-533-1929) EMAIL: CCOLABELLA@VERIZON.NET EMAIL: MWASIEM@YAHOO.COM FAX: 201 939 9059 –––––––––––––––––––––––––––––––– WANTED: USED GENERATORS –––––––––––––––––––––––––––––––– USED DIESEL GENERATORS RÉNTAL WANTED: WANT TRACTOR FARM TRAILER AND STANDBY INTERNATIONAL 1468 LOW HOURS WANT TO BUY TRACTOR FARM INTER- CONTACT: FELUX (PH: 786 603 3060) NATIONAL 1468 ONLY UNDER 4000 HOURS ORIGINAL I PAY UNDER 4000US EMAIL: EQUIPSALES2016@GMAIL.COM –––––––––––––––––––––––––––––––– CONTACT: JEAN MAURICE BOUTIN WANTED: DYNAPAC ROLLER CA 251D, (PH: 1 450 346 8975 OR 1 514 386 8975) 301D, CA262D, AND CA362D EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA CONTACT: RIZ SUNESARA –––––––––––––––––––––––––––––––– (PH: 8325280786) WANTED: CAT 953D OR 963D WASTE EMAIL: RIZ@MEGAEQUIPMENTS.COM HANDLER CRAWLER TRACTOR FAX: 8325280786 WE ARE LOOKING FOR CAT 953D OR –––––––––––––––––––––––––––––––– WANTED: CAT HYDRAULIC PULL TYPE 963D WASTE HANDLER CRAWLER SCRAPER TRACTORS. PLEASE FORWARD DETAILS, PHOTOS AND ASKING PRICE. WANTED CAT 463 SCRAPER CONVERTED TO HYDRAULIC CONTACT: MARK OR JOHN CONTACT: GEHRING GROUP INC (PH: 1-519-686-1123) (PH: 513-582-3874) EMAIL: SALES@MARCELEQUIPMENT.COM EMAIL: GEHRINGGROUP@GMAIL.COM –––––––––––––––––––––––––––––––– –––––––––––––––––––––––––––––––– WANTED: 24.00-29 TIRES WANTED: 953C OR SAME SIZE LOOKING FOR 2 24.00-29 TIRES FOR NEEDED LOADER 953C OR 953D OR CAT 80 SCRAPER JOHN DEERE 2010AND UP LOW HOURS CONTACT: DEAN JOHNSON USER USER USA (PH: 612-759-9491) CONTACT: JEAN MAURICE BOUTIN EMAIL: (PH: 1 450 346 8975 OR 1 514 386 8975) DEANAJOHNSONINC@GMAIL.COM EMAIL: FAX: 218-945-6511 JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: RUNNING OR NON RUNNING MACHINES!!!! 1) CAT WHEEL LOADERS: 920, 930,936 E/F, 950 B/E/F, 966 C/D/E/F/G/H 970F, 972G, 980G. 2) CAT MOTOR GRADER: 140G, 14G, 140H AND 14H. 3) CAT DOZER: D9R, D9N, D10N AND D10R. WITH RIPPER 4) CAT EXCAVATOR: 225D, 235 C/D AND 330BL. 5) HITACHI EXCAVATOR: EX200, EX200-1, EX400 AND EX400-1 6) JOHN DEERE EXCAVATOR: 595D 7) DYNAPAC ROLLER: CA251D, CA301D, CA262D AND CA362D IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA (PH: 8325280786) EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 8325280786 –––––––––––––––––––––––––––––––– WANTED: WANTED TO BUY CATERPILLAR 140G , 140H RUNNING OR NON RUNNING!!!!!! WANTED TO BUY CAT MOTOR GRADER 140G AND 140H IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE (PH: 713-659-0593) EMAIL: STEVE@MEGAEQUIPMENTS.COM FAX: 281-727-0415 –––––––––––––––––––––––––––––––– WANTED: TO BUY EQUIPMENT MANUALS. WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT OF ALL SORTS (NOT INCLUDED TRUCKS AND VEHICLES). WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PH: 270-849-2270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– WANTED: BELLY DUMPS I'M LOOKING FOR ALL MAKES AND SIZES OF BELLY DUMPS ASAP! WE WILL PAY CASH ON THE SPOT CONTACT: ROBERT BAKER (PH: 480-744-4008) EMAIL: RBAKER.WESTCOAST@OUTLOOK.COM FAX: 480-744-4008 –––––––––––––––––––––––––––––––– WANTED: WANTED HEAVY EQUIPMENT FORKLIFTS BOBCATS SKIP LOADERS WHEEL LOADERS BOX TRUCKS CONSTRUCTION EQUIPMENT LANDSCAPING EQUIPMENT CHIPPERS ALL TYPES OF HEAVY EQUIPMENT LOCATED IN CALIFORNIA OR SURROUNDING AREAS. PACIFIC EQUIPMENT CO. OR GO TO PACIFICEQUIPMENT.ORG CONTACT: WALTER (PH: 714-818-4136) EMAIL: PACIFIC-EQUIPMENT@HOTMAIL.COM ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 109

Unreserved Unr reserrved p public ublic equipment auctions Spec Special ial limit limited-time ed-time fin financing ancing off offer! ffer! ff er! No p payments ayments ffor or 120 d days* ays*

Caterpillar D6H LGP | Williston

5 – 2015 Caterpillar 745C | Kansas City

1 of 4 – 2013 Caterpillar 420F 4x4 | Albuquerque

2013 Caterpillar 320EL | Albuquerque

2010 John Deere 772GP A AWD WD & 2007 John Deere 772D A AWD WD | Lincoln

3 – 2014 Caterpillar 289D 2 Spd | Kansas City

Unused – 2016 Case CX55B | Columbus

1 of 2 – 2012 Smithco SX3 | Williston

2013 & 2012 Caterpillar CS54B | Kansas City

4 43,275+ 3,275+ items items in 85+ 85+ auctions including including Forrt Worth, TX Williston, ND Sacramento, CA Lincoln, NE Atlanta, GA Columbus, OH

Nov 30–Dec 30 1 Dec 2 Dec 6 Dec 5 Dec 6 Dec 7

Raleigh-Durham, NC Los Angeles, CA Chicago, IL Sun Valley, CA Salt Lake City, UT Albuquerque, NM

Dec 8 Dec 9 Dec 9 Dec 10 Dec 12 Dec 13

Manchester, NH Denver, CO North East, MD

Dec 13 Dec 14 Dec 15

Financing & leasing available Up to 100% financing, with no moneyy down.

Au Auctioneer ctioneer CChad had M. Johnson # 17668, Ritchie Ritchie Bros. Bros. Au Auctioneers ctioneers (Americ (America) a) Inc. Inc. Au Auction ction CClerk lerk License #225, Au Auctioneer ctioneer Gr Gregory egory M. Highsmit Highsmithh # 701, Au Auction ction CCompany ompany License # 001348, Au Auctioneer ctioneer Gr Gregory egory SS.. FFuqua uqua #A #AU002665, U002665, Au Auction ction Company Company Bond #0470724, Au Auctioneer ctioneer PPatrick atrick J. Hicks Hicks Bond # 0470727, Au Auction ction Firm # 2008000166, Au Auctioneer ctioneer Ed Eddie die R. Gr Graham aham # 62198943559, Au Auction ction Firm License #6980, M Motor otor Vehicle Veehicle De Dealer aler License #0061711, Au Auction ction CCompany ompany Bond #0470724, Au Auctioneer ctioneer John Korrey Korrey Bond # 0470729, Au Auction ction Firm License # 444.000193, Au Auctioneer ctioneer Gr Greg eg M. Highsmit Highsmithh # 441.000865, Au Auction ction CCompany ompany Bond #0470724, Au Auctioneer ctioneer Gr Greg eg Highsmith Highsmith Bond # 0470728, Used Used Motor Motor Vehicle Veehicle Dealer Dealer License #2647, Au Auctioneer ctioneer Fr Frederick ederick R. VVilsmeier ilsmeier Lic # 6065, Au Auctioneer ctioneer Gr Gregory egory SS.. FFuqua uqua Lic # 3078, M Motor otor VVehicle ehicle De Dealer aler License #DL #DLR25867, R25867, Au Auctioneer ctioneer John L. Korrey Korrey # 7016005 *O *OAC. AC. TTerms erms & conditions conditions apply. apply. Se Seee rbauction.com/financing. rbauction.com/financing.

Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

More items added daily Call about selling: 1.800.211.3983

rbauction.com auction.com See full auction & equipment listing gs at rb

Page 110 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

• Attleboro, MA Sat., November 19, 2016 For: Construction Equipment

• El Paso, TX Tues., November 22, 2016

• Woodstock, Ontario November 21 - 22, 2016 For: 2 Day Very Large Agricultural & Construction Equipment Auction • Canastota, NY Sat., November 26, 2016 For: Late Model Rental Fleet • Dallas (Ft. Worth), TX Tues., November 29, 2016 For: RENTALS! Construction Equipment & more • San Angelo, TX Thurs., December 1, 2016 For: Rental Fleet Construction Equipment & more • Boston, MA Fri., December 2, 2016 For: One Owner Liquidation • Youngstown, OH Sat., December 3, 2016 For: Complete Liquidation Construction Equipment, Trucks, Trailers and more • Buffalo, NY Thurs., December 8, 2016 For: Major Job Completion Auction • Marietta, OH Fri., December 9, 2016 For: Late Model Construction Equipment and more • Las Vegas, NV Sat., December 10, 2016 For: Large Job Completion & Rental Returns • Manassas, VA Fri., December 16, 2016 For: Late Model Construction Equipment & more • Atlantic City, NJ Sat., December 17, 2016 For: Rental Equipment • Albany (Greenwich), NY Fri., December 30, 2016 For: Final Auction of Year – Late Model Construction Equipment • Long Island, NY Sat., January 7, 2017 For: Late Model Construction Equipment & more • Syracuse, NY Sun., January 8, 2017 For: Light Construction Equipment & more • Dallas, TX Tues., January 10, 2017 For: Retirement Auction – Crane Support Equipment • Houston, TX Thurs., January 12, 2017 For: Rental Fleet & Earthmoving Conclusion Auction • Columbus (Delaware), OH Sat., January 14, 2017 For: Very Late Model Rental Fleet Construction Equipment • Winter Garden, FL January 28 – February 5, 2017 For: 24th Annual 9-Day Florida Auction

• Fort Worth, TX Nov. 30 – Dec. 1, 2016 • Williston, ND Fri., December 2, 2016 • Lincoln, NE Mon., December 5, 2016 • Atlanta, GA Tues., December 6, 2016 • Sacramento, CA Tues., December 6, 2016 • Columbus, OH Wed., December 7, 2016 • Raleigh-Durham, NC Thurs., November 8, 2016 • Los Angeles, CA Fri., December 9, 2016 • Chicago, IL Fri., December 9, 2016 • Sun Valley, CA Sat., December 10, 2016 • Salt Lake City, UT Mon., December 12, 2016 • Albuquerque, NM Tues., December 13, 2016 • Manchester, NH Tues., December 13, 2016 • Denver, CO Wed., December 14, 2016 • Minneapolis, MN Wed., December 14, 2016 • Kansas City, MO Thurs., December 15, 2016 • North East, MD Thurs., December 15, 2016 • Chehalis, WA Fri., December 16, 2016 • Orlando, FL February 20 – 24, 2017 BEAZLEY AUCTIONEERS www.beazleyauction.com 800-670-1227 • Dallas, TX Fri., December 16, 2016 For: Construction Equipment BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY November 23, 2016 • ONLINE ONLY November 30, 2016 • ONLINE ONLY December 7, 2016 • ONLINE ONLY December 14, 2016 • ONLINE ONLY December 21, 2016 CINCINNATI INDUSTRIAL AUCTIONEERS www.cia-auction.com 513-241-9701 • Youngtown, OH

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com

Wed., December 7, 2016 For: Absolute Auction – Triangle Asphalt, Inc.

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395

• Princeton, WV Thurs., December 15, 2016 For: Absolute Auction – Trucks, Trailer, Construction Equipment

• Lebanon, TN Sat., December 3, 2016 For: Construction Equipment

Thurs., December 1, 2016 For: Allied Erecting & Dismantling Co., Inc.

• Foley, MN Fri., March 3, 2017 For: Heavy Equipment

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811

DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087

INSIGHT AUCTIONEERS www.insightauction.com 863-386-1225

• Prospect, CT Sat., December 3, 2016 For: Construction Equipment

• Sebring, FL Sat., January 14, 2017 For: Construction & Agricultural Equipment

• Seven Valleys, PA Tues., December 13, 2016 For: Tractor, Farm & Construction Equipment

GOODRICH AUCTION SERVICE, INC. www.goodrichauctionservice.com 607-642-3293

• Sebring, FL Sat., March 11, 2017 For: Construction & Agricultural Equipment

• Newark Valley, NY Tues., December 6, 2016 For: Large Farm & Construction Equipment Auction HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252 • Livingston, LA January 26 - 28, 2017 For: 3 Day Winter Construction, Trucking & Farming Equipment Auction HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., December 9, 2016 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY November 30, 2016 • ONLINE ONLY December 14, 2016 • ONLINE ONLY December 28, 2016 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Duncansvile, PA Wed., November 30, 2016 For: Absolute Auction Surplus Liquidation D.C. Ventre & Sons, Inc. • Williamsport, PA Thurs., December 15, 2016 For: Complete Liquidation Susquehanna Supply Co., Inc. I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., December 2, 2016 For: Heavy Equipment

• Sebring, FL Sat., May 13, 2017 For: Construction & Agricultural Equipment IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426 • Kissimmee, FL February 13 – 17, 2017 For: Unreserved Public Auction – Leading Equipment Brands J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL December 1 - 2, 2016 For: Trucks, Construction & Forestry Auction JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles • Kapolei, HI Wed., December 14, 2016 For: Delta Construction Corporation Public Auction JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800 • Carrollton, GA Wed., December 7, 2016 For: End of Year Rental Return Auction MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888 • Greenville, SC Sat., November 19, 2016 For: One Owner Absolute Retirement Auction • Panama City, FL

• Seven Valleys, PA Tues., January 10, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., February 14, 2017 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., March 14, 2017 For: Tractor, Farm & Construction Equipment • Great Mills, MD March 24 - 25, 2017 For: Tractor, Farm & Construction Equipment MOTLEYS ASSET DISPOSITION GROUP www.motleys.com 1-877-MOTLEYS • Richmond, VA Tues., December 6, 2016 For: Construction Equipment & Trucks PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Thurs., December 1, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., December 1, 2016 For: Construction Equipment • ONLINE ONLY Wed., December 7, 2016 For: BTP Plant Liquidation • ONLINE ONLY Thurs., December 8, 2016 For: Construction Equipment • ONLINE ONLY Tues., December 13, 2016 For: K&M Rental Retirement Auction • ONLINE ONLY Tues., December 13, 2016 For: Morris Companies Reduction Auction • ONLINE ONLY Thurs., December 15, 2016 For: Construction Equipment • ONLINE ONLY Thurs., December 15, 2016 For: Truck & Trailer Auction • ONLINE ONLY Thurs., December 29, 2016 For: Construction Equipment

• Lebanon, TN Sat., March 11, 2017 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • ONLINE ONLY December 6 - 13, 2016 For: December NetAuction STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Gilmore City, IA Tues., November 29, 2016 For: Large Farm & Construction Equipment Auction • West Fargo, ND Wed., November 30, 2016 For: Aglron West Fargo Event • ONLINE ONLY December 7 - 14, 2016 For: December Online Auction – Upper Midwest Locations • Larchwood, IA Tues., December 20, 2016 For: Aglron Sioux Falls Event • Litchfield, MN Thurs., December 22, 2016 For: Aglron Litchfield Event UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., December 16, 2016 For: Construction, Utility & Forestry Equipment WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Phoenix, AZ Sat., December 10, 2016 For: Live Public Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 6 – 11, 2017 For: 43rd Annual Consignment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 111

Page 112 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

South Africa-Based Clear Asset Joins Proxibid for Sales Proxibid, an online marketplace for connecting buyers and sellers of highly valued items, has been selected by Clear Asset, a South Africa-based independent online auction platform for the disposal of moveable assets, to provide online selling solutions for mining, construction, agriculture and maritime equipment. Clear Asset will sell equipment in the Proxibid Marketplace using its timed auction solution as well as its new Buy Now and Make Offer capabilities, which enable buyers to purchase instantly or to negotiate the price of an item. More than 200 pieces of equipment from Clear Asset are currently available for purchase via Proxibid. Headquartered in Cape Town, South Africa, with a regional office in Johannesburg and satellite offices across Africa, Clear Asset is a leading choice for the disposal of heavy construction equipment and industrial machinery across the con-

tinent. The company sells an average of 50 percent of plant equipment internationally, having shipped more than $50 million of assets to global buyers in the last year alone. Clear Asset works with leading transport and shipping companies in the region and provides expert buyer assistance when purchasing equipment from Africa. “Clear Asset is a trusted marketplace providing a complete managed solution for buyers and sellers in Sub-Saharan Africa. We have partnered with Proxibid because we believe our sellers demand a world-class platform to reach North American buyers,” said Warren Schewitz CEO of Clear Asset. “Proxibid’s trusted Marketplace and robust technology solution offer the highest level of security and support, meaning buyers will have a Clear Asset experience whether purchasing direct through us or via Proxibid.com.”

In addition to the more than 200 pieces of equipment available using Proxibid’s Buy Now and Make Offer tools, Clear Asset also will host an upcoming clearance sale for leading South African mining contractor Hetricon. The sale features a wide arrange of quality equipment including Caterpillar front end loaders, Hitachi and Liebherr rock trucks and shovels and Komatsu graders and dozers. Unsold inventory from this sale will be available for purchase in the Proxibid Marketplace. For more information about Proxibid, visit www.proxibid.com. For more information about Clear Asset, visit www.clearasset.co.za. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

NACD Honors Briscoe With 2016 ‘Directorship 100’ Award Ritchie Bros. announced that Beverley Briscoe, chair of Ritchie Bros. board of directors, has been named to the 2016 National Association of Corporate Directors’ (NACD) Directorship 100. This award honors the most influential boardroom leaders each year. Ravi Saligram, chief executive officer of Ritchie Bros., said: “We

are honored that Bev’s leadership and contributions to our corporate governance strategy was noted by the NACD. She has demonstrated an ongoing commitment to continuous improvement and driving long-term shareholder value, and has always considered the feedback of all stakeholder groups for Ritchie Bros. We congratulate Bev

on this tremendous achievement.” Briscoe has been a director on the board of Ritchie Bros. for more than 10 years and was appointed chair of the board in July 2014. Briscoe also serves as lead director and vice chair of Goldcorp Inc. Previously, she was Chair of the BC Forest Safety Council and Chair of the Industry Training

Authority of B.C and has served on a number of corporate and not for profit boards over the past decade. The NACD is the United States’ leading authority on boardroom practices, with more than 17,000 corporate directors as members in the association. The organization has been promoting responsible board leadership for

40 years. Briscoe’s place in the “Directorship 100” will be recognized at the NACD’s gala in New York on November 30. For more information, visit rbauction.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Ritchie Bros. Auctioneers Incorporated Completes New $1B Credit Facilities Ritchie Bros. Auctioneers Incorporated announced the closing of a new five-year credit agreement totaling $1.0 billion with a syndicate of lenders comprising: (1) Multicurrency revolving facilities of up to $675 million (the “Revolving Facilities”), and, (2) A delayed-draw term loan facility of up to $325 million to finance the previously announced acquisition of IronPlanet (the “Delayed-Draw Facility” and together with the Revolving Facilities, the “Facilities”) The facilities will remain unsecured until the closing the of the IronPlanet acquisition, after which the facilities will be secured by assets of Ritchie Bros. and certain of its subsidiaries in Canada and the United States. The facilities are expected to become unsecured again after the IronPlanet acquisition, once Ritchie Bros. meets specified credit ratings or leverage ratio conditions. Ritchie Bros. intends to pay down debt levels following the close of the IronPlanet

acquisition with expected cash flows, which should facilitate the release of the security on the debt. The company consistently generates free cash flows in excess of net income as it processes cash flows relative to its auction proceeds, not simply its revenues. “We were very pleased with the interest banks expressed in participating in our new debt syndicate, evidenced by its significant over-subscription. I would like to thank all banks involved for their continued support,” said Sharon Driscoll, chief financial officer. “Our new debt arrangements provide us with increased financial flexibility relative to our prior debt arrangements, and will help us achieve future growth initiatives including our previously announced acquisition of IronPlanet. Ritchie Bros.’ strong and unique cash flow profile will drive a fairly rapid de-levering of our balance sheet following the acquisition of IronPlanet, which

will return our debt ratios to more conservative levels within a relatively short period of time.” In conjunction with this announcement, Ritchie Bros. has terminated approximately $600 million of its preexisting revolving bi-lateral credit facilities and private notes to provide the company with more suitable covenants and financial flexibility. Approximately $6.8 million of charges in relation to the early termination of the private notes are expected to be booked in the company’s fourth quarter. Merrill Lynch, Pierce, Fenner & Smith Incorporated and RBC Capital Markets served as Joint Lead Arrangers and Joint Bookrunners. Bank of America, N.A. served as Administrative Agent and the Royal Bank of Canada as Syndication Agent. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 113

Page 114 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 115

AN AUCTION TUESDAY, DECEMBER 6TH, 2016 AT 9:00 A.M., E.S.T.

THE CONSTRUCTION FALL LOUISVILLE AUCTION EQUIPMENT, TRUCKS & TRAILERS

LOCATION: KENTUCKY FAIR & EXPOSITION CENTER, LOUISVILLE, KY Bunch Brothers Auctioneers are proud to return to Louisville, KY for the Fall Louisville Auction. Auction conducted for Area Contractors, Dealers & Rental Houses.

CRANES: 2007 LINKBELT HTC 8660 Series II Hydraulic Truck Crane, SN L8J7-9434, CAT C-13 Dsl., 4 Axles, Automatic or Manual, Jake Brake, Cruise, 110’ Main Boom, 51’ Jib, Johnson 4 Sheave Block, Headache Ball, Braden Winch, 120,000 lb.; LINKBELT RTC 8050 Series II Rough Terrain Crane, SN J6J7-9203, 5.9 Cummins Dsl., Braden Dual Winches, 4 Sheave Block w/Ball, 23.5x25 Tires; GROVE RT635C Rough Terrain Crane, SN 84905, CAT Dsl., 105’ Main Boom, 29’-51’ Jib, 3 Sheave Block, Headache Ball, Grove Winch, 23.5x25 Tires, Hr. Meter reads 2193; GROVE RT65S Rough Terrain Crane, SN 34094, Cummins Dsl., 80’ Boom & Jib, 29.5-25 Tires BOOM TRUCK: 1979 IH F2554 Boom Truck, 446T Dsl., RO Stinger II TC-125-2 Crane, 92’ w/Jib; HYDRAULIC EXCAVATORS: CAT 350, SN 3ML00407; 2012 LINKBELT 210X2, SN LBX210Q5NCHEX1942; VOLVO X210CL, SN EC210LCC04621; 2005 CAT 325CL, SN 5CACRB01408; CAT 320C LU, SN T0320CCCLZ0017; HYUNDAI 290LC-3, SN E904HC11445, w/HANWOO Hyd. Hammer & Bucket; HITACHI EX210LC-3, SN 14K091875; KOMATSU PC300LC-7, SN A86353; 2007 JD 160CLC, SN CX045615; VOLVO EC290BLC, SN EC290V80367; KOMATSU PC50MR-2 Midi, SN 7650; KOMATSU PC78US-6N0 Midi, SN 8738; 2013 GEHL Z-27, Mini; JCB 804 Super, Mini, SN SLP080405E0735617; CAT E120-B Mini, SN 009796; BOBCAT 320 Advantage Series, Mini, SN 562318000; CASE CX36B Mini, SN 63271 CRAWLER TRACTORS, PIPE LAYER: JD 650H LGP;; F 2007 CAT D6T LGP, SN D6TEKJL00668; JD 450G LGP, SN T0450GH818574; NH DC100, SN 13111144; CAT D4E Pipe Layer, SN 78P37518

CRAWLER LOADERS: CAT 963C LGP, SN 2DS000574; CAT 953C; CAT 953C, SN CBBX01469; (3) CAT 939C, SN’s 6D501480, 6DS00948ROPS, SN 6DS00942

COMPACT TRACT LOADERS: 2007 BOBCAT T180, SN 531412085; 2007 BOBCAT T250, SN 531812899; CAT 287B, SN ZSA01591; CAT 287B, SN BCZSA01656; CAT 277, SN ECNC02775OPS

WHEEL LOADERS: CAT 950G, SN 0950GJ4BS00758; HYUNDAI HL740XTD-3, SN L7011B10826; KOMATSU WA320-1, SN A25466; JD 444G, SN TK444GX002304

SKID STEERS: 2014 JCB 175; Hr. Meter reads 568; 2012 MUSTANG 2054, SN F00010805

LOADER BACKHOES: CASE 590 Super L 4x4, SN JJG0285105, Extend-a-hoe; CASE 580L 4x4, Extend-a-hoe; CASE 580L Turbo Series II, 4x4, SN JJG0247184; CASE 580 Super M, 4x4, SN JJG0377246, Extend-a-hoe; CASE 580M 4x4, SN JJG037925; CASE 580 Super K 4x4, SN JJG0179913; CAT 420E IT 4x4, SN 0DAN000247; 2006 JD 310G, 4x4, Extend-a-hoe; 2014 TERRAMITE T9 4x4, SN 2149X0307, Hr. Meter reads 430 MANLIFTS: SNORKEL TB60RT, 4x4, Hr. Meter reads 307; JLG 80HX, SN 012394 0300019553, 4x4, Hr. Meter reads 399; GENIE Z45/22, SN Z45-005549; SCISSOR LIFTS: 2007 MEC 3247ES; MEC 2033ES; 2008 HY-BRID 1430; GROVE SM3270DF, SN 21190 TELEHANDLERS: JLG G9-43A, SN 0160022371; PETTIBONE 8042, SN 7-401; CAT TH514; 2008 CAT TL642, SN TBK00469; CAT TH360B, SN TH360VSLE04875; TEREX TH1056C, SN 056212; NH LM860, SN 041717619

MOTOR GRADERS: FIAT ALLIS 65C, SN 85S95145; FIAT ALLIS 65B, SN 31524; FIAT ALLIS 65, SN 56Y02337; CHAMPION 726A, SN X026500, Low Hours; GALION RP-60 Grader Milling Machine ASPHALT & COMPACTION: 2008 LEEBOY 1000F Paver, SN 49896F; TITAN T350 Airless Line Striper; 2015 ATLAS COPCO DYNAPAC CA2500D Vibratory Roller, SN 10000158EFA015783, 84” Smooth Drum, Hr. Meter reads 101; IR SD-70D Pro Pac Vibratory Roller, SN 158728, 66” Smooth Drum w/Shell Kit; WACKER RT820 Compactor, SN 5500210, Hr. Meter reads 370; CASE W602BD Smooth Drum Roller, SN 840218401, 66”; AMIDA/MORRISON PB16 Georgia Buggy, SN 9711-44966; IRPro Pac Series 70 Vibratory Roller; (3) MULTIQUIP LT120 Light Plants; BOBCAT Asphalt Milling Machine WHEEL TRACTORS: (2) 2012 JD 5093E, SN’S 1LV5093ECBY341036 & 1LV5093ELBY340934, 4x4; (2) JD 5083, SN’S 1LV5083EKCY510505 & 1LV5083EVCY510525, 4x4; JD 790, SN LV0790G991803, 4x4, w/JD 300 Loader; NH 4630; NH 4630, Hr. Meter reads 920; ALLIS CHALMER 190

TRENCHERS: DW 6510DD, SN 6B1334, 4x4; 2011 DW RT45, SN FORKLIFTS: CAT V50E, SN 5NG00588; CAT DP40, SN 3CM10179; CMWRT45XTB0000572, 4x4, Hr. Meter reads 713; TORO TRX-19 HYSTER H60XL, SN A177B22853J; CLARK GCS-22MC SN Walk Behind, SN 02971 280000514, Hr. Meter reads 284; VERR C Collins (502) 664-6581 or Joe Bunch (270) 356-0360 MEER RT200, SN 1VRX081F761001102; DW 1330 Walk Behind G138MC00915519FA; CLARK 0500S100854; HYSTER, SN 5660

NO BUYER’S PREMIUM!!! For More Information Contact: Steven Bunch (270) 748-8080 Steven J. Bunch, Auctioneer - Joe Bunch, Auctioneer

BUNCH BROTHERS

AUCTIONEERS P O BOX 175 - WINGO, KENTUCKY, 42088 Email: LDBunch@aol.com

OFFICE: (270) 376-2922 - -FAX FAX(270) (270)376-2997 376-2997 - - WEBSITE WEBSITE -- www.bunchbrothers.com www.bunchbrothers.com

Page 116 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ritchie Bros. Preparing Inventory for 2017 Orlando Auction Five days, hundreds of sellers, thousands of bidders, 10,000+ items: Ritchie Bros.' annual February Orlando event is its largest U.S. auction each year, providing an unrivaled customer experience for both buyers and sellers alike. The 2017 date is set for Feb. 20 to 24 and consignments are already starting to roll in. There are a lot of auctions to choose from in Florida in February, but Ritchie Bros.’ Orlando auction is the largest of them all. The company's world-class marketing attracts record crowds year after year, creating an optimal audience for equipment sellers. In 2016, the company sent more than 130,000 brochures and 1.1 million emails promoting the February Orlando auction, resulting in record-breaking attendance: 9,850+ people from 79 countries registered to bid on the 10,700+ items sold. “Ritchie Bros. holds hundreds of auctions in United States each year, but nothing compares to the size and experience of our annual February auction — our consignors bring the equipment and we deliver the buyers,” said Terry Dolan, president (USA & Latin America), Ritchie Bros. “We started holding equipment auctions in Orlando more than 30 years ago and have

BusinessCalendar

To view our Business Calendar online, go to www.constructionequipmentguide.com. Nebraska Land Improvement Contractors Association 58th ANNUAL NLICA CONVENTION DATES: JANUARY 17 – 19, 2017, 6:00 PM PLACE: Holiday Inn Convention Center, Kearney, NE For additional information visit www.NELICA.org ASSOCIATED GENERAL CONTRACTORS WebEd: Cybersecurity Webinar Series DATES: THURSDAY, NOV. 10, 2016 to FRIDAY, DEC. 9, 2016 TECHNOLOGY https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS Contractor Executive Exchange Changing the Way Contractors Source New Solutions and Build Relationships with Vendors DATES: SUNDAY, DEC. 4, 2016 to TUESDAY, DEC. 6, 2016 CHARLESTON, SOUTH CAROLINA Other https://www.agc.org/connect/events-calendar ASSOCIATED GENERAL CONTRACTORS Construction Project Manager Course DATES: SUNDAY, DEC. 4, 2016 to FRIDAY, DEC. 9, 2016 DALLAS, TEXAS https://www.agc.org/connect/events-calendar Missouri Land Improvement Contractors Damage Prevention and Excavation Safety Summit DATES: WEDNESDAY, DEC. 7, 2016 to THURSDAY, DEC. 8, 2016 LOCATION: OZARK EMPIRE FAIRGROUNDS SPRINGFIELD, MO For more information, contact Deb Dickens, Executive Director. Phone: 573/634-3001 • Email: MLICA@aol.com Missouri Land Improvement Contractors Missouri LICA Winter Convention Dates: January 26 - 28, 2017 Place: Hilton Garden Inn, Columbia, MO

In 2016, the company sent more than 130,000 brochures and 1.1 million emails promoting the February Orlando auction, resulting in record-breaking attendance: 9,850+ people from 79 countries registered to bid on the 10,700+ items sold.

worked tirelessly to make it a world-class event year after year. Today the auction serves as a bellwether for the state of the For more information, contact: Missouri LICA State Office Deb Dickens, Executive Director 1101 West High Street, Jefferson City, MO 65109 Phone: 573/634-3001 • Email: MLIA@aol.com AGC (Associated General Contractors) of Minnesota STP CLASSES Supervisory Training Program (STP) classes for November – December will start the week of November 7. For additional information, contact Renee Horsman at rhorsman@agcmn.org

equipment industry. Next February, together with our consignors, we will create an auction like no other.” EVENT:

AGC – MnDOT Grading Forum Earle Brown Heritage Center, Brooklyn Center TIME: 8:30 AM to 4:30 PM AGC Contact: Denise Woods at AGC of Minnesota, 525 Park Street, #110, St. Paul, Minnesota 55102. Telephone: 651/632-8929 Fax: 651/632-8928 Email: info@agcmn.org

AGC (Associated General Contractors) of Minnesota AGC – MnDOT Grading Forum On December 6, 2016, AGC and MnDOT will host the annual allday Transportation Construction and Grading Innovations Technology Forum. This forum offers contractors and MnDOT repAGC (Associated General Contractors) of Minnesota resentatives from around the state an opportunity to hear from DATE: WEDNESDAY, NOVEMBER 30, 3016 industry experts and discuss common current issues. EVENT: Member Business Meeting/Holiday Reception AGC CONTACT: Denise Woods of AGC of Minnesota, 525 Park PLACE: HEARTLAND RESTAURANT, ST. PAUL, MINNESOTA Street, #110, St. Paul, Minnesota 55102. TIME: 5:00 PM to 7:30 PM Telephone: 651/632-8929 • Fax: 651/632-8928 AGC Contact: Denise Woods at AGC of Minnesota, 525 Park Street, Email: info@agcmn.org. #110, St. Paul, Minnesota 55102. Telephone: 651/632-8929 Fax: 651/632-8928 Email: info@agcmn.org AGC’s 2017 Conference on Surety Bonding and Construction Risk Management AGC (Associated General Contractors) of Minnesota TYPE: CONFERENCE/EXPO Once again, we will be collecting for Toys for Tots at the holiday DATES: JAN. 30, 2017 (12:00 AM CT) to FEB. 1, 2017 reception. New toys, games, and books, as well as cash and (12:00 AM CT) checks, will be greatly appreciated. Checks should be payable LOCATION: NAPLES, FLORIDA to “Toys for Tots.” There will also be cash jars available at the WEB SITE: http://meetings.agc.org/risk/ reception. Checks can also be mailed in advance of the recep- This conference serves and supports everyone playing a senior tion to Denise Woods at the AGC office. Denise Woods, AGC of role in construction risk management. That includes all senior executives of the construction companies in the AGC family, and Minnesota, 525 Park Street, #110, St. Paul, MN 55102. particularly the in-house lawyers and risk managers for these companies. ASSOCIATED GENERAL CONTRACTORS CONTRACTOR EXECUTIVE EXCHANGE Concrete Sawing & Drilling Association (CSDA) to Meet in DATES: Sunday, Dec. 4, 2016 to Wednesday, Dec. 7, 2016 Puerto Rico for the First Time LOCATION: Belmond Charleston Place, Charleston, SC We are very excited to invite you to attend the inaugural CSDA is heading to beautiful Puerto Rico for the association’s Contractor Executive Exchange sponsored by AGC of America, 45th Annual Convention & Tech Fair. December 4 to December 7, 2016 at the Belmond Charleston Dates: March 14-18, 2017 Place in beautiful Charleston, SC. Over the course of 2.5 days, Puerto Rico is an ideal location for industry professionals to suppliers will take part in pre-scheduled one-on-one meetings meet, network and relax – a tropical island paradise that remains part of the U.S. and is easily accessible for American with the industry’s top general contractors. For more information, please contact: Drew DeSarle; ddesar- and international travelers. le@exchangeevents.com; Phone: 440/465-9618; CSDA has chosen the luxurious Gran Melia Resort as the convention venue – a highly sophisticated architectural gem nestled www.exchangeevents.net/GeneralContractorsExchange-2016/ on Puerto Rico’s northeastern coast in Coco Beach, Rio Grande. The CSDA Annual Convention is attended by owners, managers AGC (Associated General Contractors) of Minnesota and operators from concrete cutting, polishing and imaging DATE: TUESDAY, DECEMBER 6, 2016

With the Orlando auction, Ritchie Bros. will provide equipment buyers with access to: • A massive selection of equipment with all types of equipment and all the top brands • First-class facilities so onsite buyers can be comfortable and see the equipment while they bid • Large, well-organized yard to make onsite inspection easy and convenient for buyers • Comprehensive equipment info and pictures online • Onsite refurbishment services • Availability to bid on site and online, including bidding from mobile or tablet with the new Ritchie Bros. app • In-house financing through Ritchie Bros. Financial Services giving buyers more spending power Ritchie Bros. held its first auction in Florida in 1984 and has been operating at its current location in Orlando since 2003. Since 2003 the company has sold 157,300+ equipment items and trucks for $2.8 billion. For more information, call 855/331-5757 or visit rbauction.com/Orlando. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) companies as well as representatives from manufacturers and distributors who support the industry with products and services. Anyone who falls into these categories should join CSDA for this important networking event. Registration opens September. For more information, visit www.csda.org/convention, call 727/577-5004 or email info@csda.org. NATIONAL PAVEMENT EXPO 2017 – REGISTER TODAY! DATES: FEBRUARY 1 thru FEBRUARY 4, 2017 PLACE: MUSIC CITY CENTER, NASHVILLE, TN ALL-NEW LEADERSHIP BOOT CAMP – JANUARY 31 Four reasons to attend National Pavement Expo: Packed Exhibit Hall 50+ Conference Sessions lead by construction industry experts covering team development, employment issues, finance, selling, safety, management and training All-New Leadership Boot Camp for owners and employee leaders, presented on Tuesday, January 31. Nashville – from the sights to the sounds, Music City is packed with things to do! Register now and plan your trip to get the best deals on conference sessions, hotels and airfare. For more information, call 920/542-1131 or toll-free at 800/538-5544. National Pavement Expo, AC Business Media, 201 N. Main Street, Fort Atkinson, WI 53538. ASSOCIATED GENERAL CONTRACTORS AGC’s 98th ANNUAL CONVENTION DATES: Tues., MARCH 7, 2017 to Thurs., MARCH 9, 2017 LOCATION: Las Vegas, Nevada Cultivate, Innovate, Accelerate – Register Now & Save, Early Registration Deadline: November 30, 2016. Make your plans to attend the 98th Annual AGC Convention and seize your opportunity to cultivate new ideas and partners, see and hear about the latest in construction innovation, and leave with the tools to accelerate your business to the next level. The 2017 Convention features a packed program focused on sharing solutions from experienced contractors and industry experts on key construction issues, networking events structured so you can make valuable new connections, and opportunities to shape the future of the construction industry and the association. The AGC Annual Convention is your best opportunity to enhance your business and advance your career. For more information, contact AGC of America at 703/548-3118; communications@agc.org; www.AGC.org.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 117

Page 118 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AED SUMMIT/CONDEX ........................................................................................30 AIM ATTACHMENTS ..............................................................................................28 ALEX LYON & SON INC YOUNGSTOWN OH / MARIETTA OH ......................................................113 ALEX PARIS CONTRACTING CO INC....................................................................9 ALTORFER CAT ....................................................................................................12 AMERICAN STATE EQUIPMENT ............................................................................7 ARING EQUIPMENT CO INC ................................................................................19 ASC CONSTRUCTION EQUIP USA......................................................................11 ASPEN EQUIPMENT ............................................................................................43 ATI CORPORATION/LEVEL BEST ........................................................................26 ATLAS COPCO ....................................................................................................102 BARGAINS ....................................................................................................105,106 BELL TRUCKS AMERICA INC ..............................................................................49 BLANCHARD MACHINERY INC............................................................................18 BOMAG AMERICA'S INC ......................................................................................99 BONNELL INDUSTRIES INC ................................................................................75 BOSS PRODUCTS ................................................................................................44 BROOKS TRACTOR ..............................................................................................35 BUNCH BROS AUCTION CO LOUISVILLE, KY ........................................................................................115 BUTLER MACHINERY ..........................................................................................28 CALDER BROTHERS CORPORATION ..............................................................103 CEG SCALE MODELS ..........................................................................................38 CLASSIFIEDS ......................................................................................................107 CONSTRUCTION EQUIPMENT GUIDE MINI COMPACT ..........................................................................................56 CONEX/CONAGG PAPER ..........................................................................90 WANTED....................................................................................................108 CONEX/CONAGG MAGAZINE....................................................................50 FLORIDA AUCTION PROMO ....................................................................114 CUSTOM MADE PRODUCTS ..............................................................................36 DEUTZ CORPORATION ................................................................................37,107 E TIP INC ..............................................................................................................36 ERB EQUIPMENT..................................................................................................15 FABICK CAT ............................................................................................................2 FELLING TRAILERS ..............................................................................................76 FINKBINER EQUIPMENT CO..................................................................................7 FLANGE LOCK ......................................................................................................26 FOLEY EQUIPMENT CO ......................................................................................21 FURY MOTORS ....................................................................................................69 GEHL ....................................................................................................................87 GOMACO CORP....................................................................................................96 H & L TOOTH CO ..................................................................................................31 HINIKER NORTHEAST..........................................................................................45 HITACHI MFG ........................................................................................................84 HORST WELDING/HLA ATTACHMENTS ..............................................................42 HOWELL TRACTOR & EQUIPMENT CO............................................................120 HYDREMA U S INC ..............................................................................................37 HYUNDAI CONSTRUCTION EQUIPMENT ..........................................................54 ILLINOIS TRUCK & EQUIPMENT ..........................................................................3 INTERSTATE TRAILERS ......................................................................................65 IRAY AUCTION FOLEY MN ................................................................................................112

IRONPLANET KISSIMMEE FL ..........................................................................................117 ISTATE TRUCK CENTER ......................................................................................44 JCB INC..................................................................................................................58 JFW EQUIPMENT INC ..........................................................................................98 JJ SCHECKEL CORP ............................................................................................22 JOHN DEERE ........................................................................................................46 JOHN DEERE SKID STEER..................................................................................57 KOMATSU AMERICA CORP..................................................................................88 KUBOTA SVL ........................................................................................................91 LANO EQUIPMENT INC ..........................................................................................6 LEEBOY ................................................................................................................94 LIEBHERR CONSTRUCTION EQUIPMENT ........................................................23 LINK-BELT EXCAVATORS ....................................................................................51 M ADAMS EQUIPMENT CO ..................................................................................27 MACALLISTER MACHINERY CO INC ..................................................................36 MB AMERICA INC..................................................................................................39 MCCANN INDUSTRIES INC....................................................................................6 NPK CONSTRUCTION EQUIPMENT INC ............................................................33 NUSS GROUP ........................................................................................................8 PATTEN TRACTOR & EQUIPMENT CO ..............................................................17 PERKINS ENGINES COMPANY LTD ....................................................................29 PRIME SOURCE....................................................................................................86 PURPLE WAVE INC ............................................................................................111 RANSOME EQUIPMENT SALES LLC/LRH ........................................................108 RAYCO ..................................................................................................................35 REMU SCREENING TECHNOLOGY ....................................................................39 RITCHIE BROS. AUCTIONEERS UNRESERVED PUBLIC AUCTION ..........................................................109 LINCOLN NE..............................................................................................119 ROAD BUILDERS MACHINERY ......................................................................13,86 ROADTEC ..............................................................................................................97 ROGERS BROTHERS CORP ..............................................................................81 ROLAND MACHINERY INC ....................................................................................5 ROSCO MFG CO ................................................................................................104 SAKAI AMERICA INC ............................................................................................98 SOUTHEASTERN EQUIPMENT CO ....................................................................34 STAR EQUIPMENT LTD ..........................................................................................6 STARR PARTS & EQUIPMENT LLC ....................................................................86 SWANSTON EQUIPMENT ....................................................................................25 TAKEUCHI..............................................................................................................60 THE VICTOR L PHILLIPS CO ..............................................................................30 TOWMASTER INC ................................................................................................71 TRI-STATE BOBCAT ........................................................................................12,18 UTILITY 1 SOURCE ..............................................................................................81 VOLVO COMPACTION ........................................................................................102 VOLVO CONSTRUCTION EQUIPMENT ..............................................................48 WACKER NEUSON CORP ....................................................................................52 WEST SIDE TRACTOR SALES ............................................................................26 WIRTGEN AMERICA ..........................................................................................101 WORLD OF CONCRETE ......................................................................................34 YANMAR AMERICA ..............................................................................................83

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • November 19, 2016 • Page 119

Unreserved public equipment auction Special limited-time ﬁnancing oﬀer! No payments for 120 days*

2010 John Deere 772GP AWD & 2007 John Deere 772D AWD

Caterpillar D5N LGP

Caterpillar 963C

2008 Komatsu PC228USLC-3E0

Gomaco GP2500

Ditch Witch HT100

Sakai SW850

John Deere 310D 4x4

2007 Bobcat S175

Lincoln, Nebraska

December 5 (Monday) 9 am

Equipment includes

Bid in person or online

Location

Crawler tractors, crawler loaders, loader backhoes, skid steers, truck tractors, trenchers, concrete pavers & much more

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

555 W South St, Lincoln

On-site inspection hours

Financing & leasing available

Mon–Fri, 8 am–5 pm

More items added daily Call about selling: 816.633.4096

Up to 100% financing, with no money down.

See full auction & equipment listings at rbauction.com OAC. Terms & conditions apply. See rbauction.com/financing.

Page 120 • November 19, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE