Issuu

Published Nationally

$3.00

Midwest Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

www.constructionequipmentguide.com

July 2, 2016 • Vol. XX • No. 14 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

Inside

April ’15 to April ’16…

Employment Increases in 235 Metro Areas

Roland M achinery Dem os Intelligent Machines …14

Turnpike Authority (KTA) to improve travel in east Wichita. The overall improvements along East Kellogg — more than $300 million and funded by T-WORKS ($162 million), the city of Wichita and the KTA — includes new interchanges at Webb, Greenwich and the Turnpike. It has been divided into two pieces: the first is the Webb Road

Construction employment rose between April 2015 and April 2016 in two-thirds of the nation’s metro areas, while spending on most types of structures increased for the year despite a drop in the latest month, according to a new analysis of federal data on employment and construction spending released June 1 by the Associated General Contractors of America. Association officials said that many parts of the country continue to benefit from strong demand for construction services. “Construction growth remains widely distributed by location and project type,” said Ken Simonson, the association’s chief economist. “However, job gains were uneven: many states included metros with large gains but also areas that lost jobs. Some of those metros might have added construction jobs if contractors had been able to find enough qualified workers. The dearth of skilled construction workers in many areas threatens to hold down the extent of job gains in the coming months.” There were construction employment gains in the past year in 235 out of 358 metro areas, losses in 67 areas, and no change in 56. Anaheim-Santa Ana-Irvine, Calif., added the most construction jobs (14,900 jobs, 17 percent), followed by Orlando-Kissimmee-Sanford, Fla. (8,800 jobs, 15 percent); New York City (7,800 jobs, 6 percent); and Phoenix-Mesa-Scottsdale, Ariz. (7,200

see WILDCAT page 44

see EMPLOYMENT page 68

Wildcat Construction Co. Inc. photo

Crews from Wildcat Construction Co. Inc. are into the second construction season for the $79 million Kellogg and Webb Interchange Project, part of an East Kellogg initiative launched by a partnership between the city of Wichita, the Kansas Department of Transportation (KDOT), and Kansas Turnpike Authority (KTA) to improve travel in east Wichita. Attendees Conver ge on Drone Confer ence…16

Wildcat Construction Enters Second Year of $79M Job By Irwin Rapoport CEG CORRESPONDENT

Aber ’s Towi ng & Crane Adds Gr ove to Fl eet…26

Table of Contents ............4

Paving Section ..........45-55 Wheel Loaders, Tool Carriers & Attachments Section ....................73-103 Business Calendar ......104 Auction Section....108-119 Advertisers Index ........118

Ind. Leaders Expect Influx of Funds for Roads INDIANAPOLIS (AP) Local government leaders in Indiana are poised to receive an influx of state money for road construction projects this summer. The Evansville Courier & Press reported that the funding takes the form of a one-time gift,

derived from an excess in income taxes, that state lawmakers chose to give local governments. Posey County Commissioner James Alsop said he foresees an increase in construction statewide because “you never want to pass up on free money.’’

Posey County received about $1.7 million from the state, while Gibson County received $900,000. Warrick and Vanderburgh counties received $2.5 million and $3.1 million, respectively. The gift amount was determined by population size.

State lawmakers said local governments also can use the money as their matching funds for the Community Crossings grant from the Indiana Department of Transportation. Grant money will be distributed see FUNDS page 12

Page 2 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PROVIDING THE BEST IN

USED EQUIPMENT

Wisconsin & Upper Michigan Operations

2006 257B . . . . . . . . . . . $21,500 1997 CatCat D5M XL ..................................$39,500

2006 257B . . . . . . . . . . . $21,500 2008 CatCat 325DL ....................................$79,500

2006 257B . . . . . . . . . . . $21,500 2001 CatCat 160H ......................................$99,000

2006 Cat 257B . . . .........................$31,500 . . . . . . . $21,500 2009 Kobelco SK35SR

S/N 3939QC Hrs s/n6GN00322, SLK05074, OROPS, 2,035 HrsU/C CabGood, Heat, Hyd Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

SLK05074,7671 2,035 HrsEROPS, Cab Heat, Hyd QC S/Ns/n A3R01140 Hrs, Hyd Thumb, Cab Heat, Hyd QC Bucket 2,035 Hrs Cab Heat, Hyd

S/N s/n 2FM00608 12718 HRS, SLK05074, 2,035 Hrs EROPS, Cab Heat,High HydProfile, QC Cab Heat, Hyd QC R Ripper, Circle Tight 2,035 Hrs Cab Heat, Hyd

S/N PX15-22232 OROPS, s/n SLK05074, 2,035908 HrsHOURS, Cab Heat, Hyd QC AUX Cab HYD,Heat, BLADE, Hyd BUCKET QC 2,035 Hrs Cab Heat, Hyd

2006 . . . . . . . . . . . $21,500 1999 CatCat 951257B ............................................$9,500

2006 Cat 257B . . . . . . . . . $21,500 2006 Kobelco SK480. .............................$53,000

2006 257B . . . . . . . . . . $21,500 1998 CatCat D6M LGP ...............................$44,000

2006 CatDeere 257B670G . . . . ....................$125,000 . . . . . . . $21,500 2010 John

S/N fair,Hyd bucket, s/n86J02337, SLK05074, undercarriage 2,035 Hrs Cab Heat, QC OROPS, hrs unknown Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/Ns/n YS06U0571, EROPS, Stick, SLK05074, 9187 2,035Hrs, Hrs Cab Heat,Long Hyd QC Bucket, CabUndercarriage Heat, Hyd QC Fair 2,035 Hrs Cab Heat, Hyd

4JN01375, OROPS, s/nS/N SLK05074, 2,0351625 Hrs Hours, Cab Heat, Hyd QC Cab Sheet Heat, Hyd QC Good UC Good, Metal 2,035 Hrs Cab Heat, Hyd

S/N 2,035 628277, Hrs, Hyd QC s/n SLK05074, Hrs4283 Cab Heat, Heat, Hyd QC EROPS,Cab Snow Wing, Tires Good 2,035 Hrs Cab Heat, Hyd

1985 CatCat 140G ......................................$49,500 2006 257B . . . . . . . . . . . $21,500

2011 Komatsu PC650 2006 Cat 257B . . ...........................$75,000 . . . . . . . . $21,500

2008 Kobelco SK350 2006 Cat 257B . .............................$45,000 . . . . . . . . . $21,500

2012 980K ....................................$320,000 2006CatCat 257B . . . . . . . . . . . $21,500

S/NSLK05074, 72V08774, EROPS, Tires Balloon, s/n 2,035 Hrs Cab Heat, Hyd QC Blade Linkage Cab Heat, HydGood QC 2,035 Hrs Cab Heat, Hyd

S/Ns/n 65117, 14,7452,035 Hrs, Hrs EROPS, 6.75 Yd SLK05074, Cab Heat, HydBucket, QC UC Fair, Metal CabSheet Heat, Hyd QCGood 2,035 Hrs Cab Heat, Hyd

S/N YC08-U1859,11101 EROPS, s/n SLK05074, 2,035HRS, Hrs Cab Heat,BUCKET Hyd QC 60", GOOD CabUC Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/N W7K00666, 6905 Hrs, EROPS, s/n SLK05074, 2,035 Hrs Cab Heat, Hyd QC Auto Good CabLube, Heat,Tires Hyd QC 2,035 Hrs Cab Heat, Hyd

2006 257B . . . . . . . . . . . $21,500 2011 CatCat 930H ......................................$75,000

2006 257B . . . . . . . . . . . $21,500 2013 CatCat 303.5 ......................................$43,500

2006 257B . . . . . . . . . . . $21,500 2012 CatCat 262C2......................................$24,000

2006 Cat 257B . . . . . . . . . . . $21,500 2006 Bobcat S300 ................................$19,500

S/N DHC03051, 9873 s/n SLK05074, 2,035 HrsHrs, Cab EROPS/AC, Heat, Hyd QC Heat,Bucket Hyd QC 4YD RideCab Control, 2,035 Hrs Cab Heat, Hyd

S/N RKY02238, 325Cab Hrs,Heat, Bucket s/n SLK05074, 2,035 Hrs Hyd QC Cab Heat, Hyd QC 2,035 Hrs Cab Heat, Hyd

S/N 2847Hrs Hrs,Cab EROPS, AC, QC Case s/nTMW00469, SLK05074, 2,035 Heat, Hyd Cab Heat, Hyd QC 2 Tires Poor Control, 2 Speed, 2 Tires Good 2,035 Hrs Cab Heat, Hyd

S/N 5311112992,035 4261Hrs Hours, EROPS/Heat, s/n SLK05074, Cab Heat, Hyd QC Cab Heat, HydTires QC Fair Man Cplr, Bucket, 2,035 Hrs Cab Heat, Hyd

Wisconsin & Upper Michigan Operations

800.353.1944 ... For Used Equipment 877.754.4477.... For Used Work Tools & Attachments 414.461.9100 ... In WI and Upper Michigan

Used Equipment: Jeff Speer or Wes Ensrud Used Work Tools & Attachments: John Riechers 11200 W. Silver Spring Rd., Milwaukee, WI 53225

www.fabickcat.com Hundreds of machines. Listings updated daily.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 3

2003 Cat 815F Padfoot ............. $215,000

2011 Caterpillar CS56 ............ $79,500

2011 Volvo DD112F…............. $59,500

2012 Deere 850K XL LT T w/Winch.. $184,500

4-39” padfoot drums with cleaners, cab with A/C, Cat 3176 240HP diesel, 12’ hydraulic leveling blade, 45,760 lbs., 4,816 hrs. ............................... #10521

A/C, Cat C6.6 Acert 156HP diesel, 84” vibratory smooth drum compactor, 18-26 tires, 25,200 lbs., 2,001 hrs. .....................................................#10865

48HP, diesel, 78” vibratory drum, hydrostatic drive, front and rear spray system, 4,200 VPM, single/double drum vibration, 27,670 lbs., 325 hrs. ........ #10802

AC, 205HP Tier 4 diesel, 12’ 3” 6 way blade, hydrostatic trans., 23 1/2” pads, Allied H6H 60,000 lb. winch, rear screen, 49,000 lbs., 1,221 hrs. ....................... #11043

Illinois T Truck & Equipment • 320 Briscoe Drive, Morris, Illinois 60450 rental@iltruck.com sales@iltruck.com • www www.iltruck.com .iltruck.com • (815) 941-1900

Page 4 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWesT eDITIon

In ThIs Issue

Circulated Throughout

Founder, Publisher & CEO Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

14 16

To r e a d t he s e s t o ri e s a nd ma ny m o re , v is it w w w . co n s t r u ct io ne q ui pm e nt g uid e . co m

specIal secTIon

34 PANAMA CANAL OPENS NEWLY EXPANDED

73 WHEEL LOADERS

Authorities hosted a big bash to inaugurate newly expanded locks that will double the Panama Canal’s capacity in a multibillion-dollar bet on a bright economic future despite tough times for international shipping.

Be sure to check out this special section! Keep up to date with the latest information on wheel loaders.

$5B LOCKS

56 MCALLISTER EQUIPMENT CO. PROMOTES ALLISON

feaTures 10 MILWAUKEE GETS $1M TO REPLACE LEAD PIPES

TO VICE PRESIDENT OF SALES

112 MORE THAN 2,100 BIDDERS PARTICIPATE IN

14 ROLAND MACHINERY CO. HOSTS INTELLIGENT

More than 2,100 bidders participated online and in person at Ritchie Bros.’ multi-million dollar unreserved public equipment auction in Minneapolis, Minn., on June 17.

Roland Machinery Co. hosted an intelligent machine control demonstration at its location at 604 Stokely Drive, Deforest, Wis., on June 15.

16 ATTENDEES CONVERGE ON DRONE FOCUS

RITCHIE BROS. SALE

116 IRONPLANET INTRODUCES SELF-LISTING SERVICE TO PUBLIC SECTOR MARKETPLACE

Organized by Emerging Prairie, a nonprofit organization in Fargo, the event brought together a sold-out crowd of 300 attendees with numerous speakers to discuss the unmanned aerial systems (UAS) industry.

20 ALTORFER INC. HOSTS OPEN HOUSE TO CELEBRATE

116 PURPLE WAVE ANNOUNCES SITE ENHANCEMENTS

CONFERENCE IN FARGO

NEW LOCATION Altorfer Inc. held an open house on May 25 to celebrate the opening of its new location in Springfield, Ill.

26 ABER’S TOWING & CRANE SERVICE ADDS NEW GROVE TO FLEET Aber’s Towing & Crane Service, founded by Miles and Alene Aber in 1950, has grown into an 18 to 20-employee operation, which divides its time equally between its hauling, towing and crane services.

34 USDOT AWARDS $3M FOR HIGHWAY-RELATED JOB TRAINING U.S. Transportation Secretary Anthony Foxx announced $3 million in job training grants in eight states.

Toll Free Fax Web site Editorial e-mail Advertising e-mail For advertising rates Contact

The new interface offers a guided search with robust technology delivering instant results, with item counts, so users can quickly and easily find what they are looking for, according to the company.

equIpMenT 45 ATLAS COPCO Dynapac F1200C Compact Tracked Paver 48 CHICAGO PNEUMATIC MV 58A Compactor 62 LIEBHERR PR 776 Crawler Tractor

DeparTMenTs 104 CLASSIFIEDS 104 BUSINESS CALENDAR 108 COMING AUCTIONS

Edwin M. McKeon Sr. Joseph S. McKeon Craig Mongeau Christine Allen Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

McAllister Equipment Co. announced the promotion of Park J. Allison to vice president of sales.

Milwaukee is getting a $1 million state loan to begin the costly task of replacing 70,000 lead water pipes throughout the city.

MACHINE DEMO

Main office

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Kent Hogeboom National Sales Manager 315/866-1423 800/988-1203 315/866-1379 e-mail khogeboom@cegltd.coom

Toll Free Fax

Contact

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/243-9690 800/810-7640 440/243-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

Mobile

Facebook

Twitter

YouTube

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2016, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 5

Quality Used Equipment...with support to back it up

Komatsu PC400LC-8, ‘09, 6,677 hrs ....$140,000

DOZERS Case 1650K, ’04, 391 hrs ....................................................$49,000 Komatsu D51PX-22, ’07, 5,510 hrs ..................................$114,500 Komatsu D51PX-22, ’08, 4,247 hrs ..................................$114,500 Komatsu D61EX-15EO, ‘12, 3,158 hrs ..............................$139,000 Komatsu D61PX-15EO, ‘08, 4,180 hrs ..............................$105,000 Komatsu D61PX-15 GPS, ’11, 1,783 hrs ..........................$175,000 Komatsu D61PX-23, ’14, 1,838 hrs ..................................$179,000 Komatsu D61PX-23, ’14, 2,367 hrs ..................................$179,000 Komatsu D65EX-15, ’06, 2,301 hrs....................................$144,500 Komatsu D65PX-15EO, ’06, 11,070 hrs ..............................$59,000 Komatsu D65EX-15EO, ’07, 3,934 hrs ..............................$149,500 Komatsu D65PX-15EO, ‘07, 4,704 hrs ..............................$149,500 Komatsu D65WX-15EO, ’07, 3,959 hrs ..............................$157,000 Komatsu D155AX-6, ’11, 3,694 hrs ..................................$265,000 Komatsu D275AX-5, ’03, 23,015 hrs ..................................$99,500

FORESTRY Komatsu 911.4, ’11, 6,132 hrs ..........................................$359,000 Komatsu 911.4, ’10, 5,225 hrs ..........................................$370,000 Ponsse Ergo Harvester, ‘05, 13,239 hrs ............................$160,499 Valmet 931.1, ‘11, 7,200 hrs ............................................$349,000

MATERIAL HANDLERS

Komatsu PC200LC-6, ‘94, 9,160 hrs ........$34,000 Wirtgen W2000, ‘08, 7,798 hrs..........................................$199,999 Wirtgen W2000FCS, ’01, 11,797 hrs ..................................$99,000 Wirtgen W2100, ’04, 8,538 hrs..........................................$209,500 Wirtgen WR240, ‘06, 7,913 hrs..............................................$CALL

COMPACTION Bomag BC61RB, ’00, 15,862 hrs ........................................$49,900 Bomag BC1172RB, ’05, 15,531 hrs ....................................$89,900 Hamm HD120HV, ‘03, 2,690 hrs ..........................................$32,999 Hamm HD120HV, ‘04, 3,211 hrs ..........................................$30,000 Hypac C778A, ‘95, 6,674 hrs ................................................$9,000 Stone WP4100 Double Drum, ‘09, 1,018 hrs ......................$14,599

PAVING IR 550P, ‘91, 2,010 hrs ..........................................................$9,000 Leeboy 8500T, ’06, 5,859 hrs ..............................................$20,799 Vogele 5203-2, ’08, 4,307 hrs ..........................................$115,000 Vogele 880WB, ’05, 5,862 hrs ............................................$26,699

SKID STEER Case TV380, ‘11, 1,945 hrs..................................................$45,000 New Holland L230, ’14, 295 hrs ..........................................$49,399

TRAILERS Trailboss 25-Ton, ’90 ............................................................$7,500

Cat 365CL-MH, ‘08, 10,428 hrs ........................................$137,500 Gehl RS8-42, ’03, 3,594 hrs ................................................$37,500 Komatsu P400LC-8MH, ’08, 6,095 hrs ..............................$219,500 Sennebogen 825M D, ’13, 17 hrs ..............................................Call

OFF HIGHWAY TRUCKS Komatsu HD465-7, ’06, 18,843..........................................$219,500

MILLING Wirtgen W60, ’08, 628 hrs ................................................$144,900 Wirtgen W600, ’03, 2,403 hrs..............................................$59,500

WHEEL LOADERS Deere 544K, ’13, 1,023 hrs ................................................$159,000 Deere 624K, ’13, 948 hrs ..................................................$166,000 Deere 624K, ’13, 905 hrs ..................................................$166,000 Kawasaki 115ZIV-2, ’99, 18,714 hrs....................................$29,000 Komatsu WA200PZ-6, ‘14, 957 hrs....................................$115,000 Komatsu WA270-7, ’15, 177 hrs........................................$139,000 Komatsu WA270-7, ’15, 759 hrs........................................$129,000 Komatsu WA380-6, ’11, 2,888 hrs ....................................$150,000 Komatsu WA380-6, ’12, 2,571 hrs ....................................$165,000 Komatsu WA380-7, ‘12, 3,025 hrs ....................................$147,500 Komatsu WA400-5L, ’05, 10,968 hrs ..................................$72,999 Komatsu WA500-6, ‘09, 9,628 hrs ....................................$207,299 Komatsu WA500-7, ‘12, 4,618 hrs ....................................$265,000 Komatsu WA500-6, ’09, 8,621 hrs ....................................$211,399 Terex TL300-2, ’08, 2,441 hrs..............................................$69,500

CRUSHING/SCREENING Kleemann MSD190D Screen, ’13, 688 hrs........................$255,000 Kleemann MC110Z Crusher, ’13, 714 hrs..........................$475,000 Kleeman MR130Z, ‘11, 6,158 hrs ......................................$415,000 Metso LT 1415, ‘06, 7,401 hrs................................................$CALL

EXCAVATORS Deere 240D LC, ‘10, 6,338 hrs ................$80,000

V I S I T

Atlas Copco MB1200 Hydraulic Hammer, ’05, Rebuilt & Painted ...... ..............................................................................................$21,799 Case CX135SR, ‘11, 2,350 hrs ............................................$88,000

Case CX160, ‘05, 6,579 hrs ................................................$45,599 Cat 330CL, ’02, 12,032 hrs ..................................................$59,500 Cat M318, ‘96, 6,440 hrs ....................................................$39,500 Deere 200C LC, ’04, 8,988 hrs ............................................$60,000 Deere 225C LC, ’04, 7,029 hrs ............................................$62,667 Deere 240D LC, ‘10, 6,338 hrs ............................................$80,000 Deere 350DLC, ’07, 5,837 hrs ..........................................$109,500 Deere 350DLC, ’07, 6,832 hrs ..........................................$109,500 Gradall XL3100, ’03, 4,889 hrs............................................$47,900 Kobelco SK485-9, ‘12, 3844 hrs ........................................$180,000 Komatsu PC138USLC-8, ’12, 2,056 hrs ............................$105,000 Komatsu PC138USLC-8, ’13, 2,432 hrs ............................$115,000 Komatsu PC200LC-6, ‘94, 9,160 hrs....................................$34,000 Komatsu PC200LC-7, ‘03, 8,117 hrs....................................$65,000 Komatsu PC200LC-7, ’03, 7,248 hrs....................................$45,000 Komatsu PC210LC-10, ’14, 978 hrs ..................................$150,000 Komatsu PC210LC-10, ’14, 1,307 hrs................................$178,000 Komatsu PC210LC-10, ‘15, 812 hrs ..................................$169,000 Komatsu PC220LC-6, ‘98, 19,095 hrs..................................$37,100 Komatsu PC220LC-6, ’99, 12,994 hrs..................................$34,000 Komatsu PC220LC-7, ‘04, 12,969 hrs..................................$48,000 Komatsu PC220LC-8, ’06, 9,204 hrs....................................$83,000 Komatsu PC220LC-8, ‘06, 6,663 hrs....................................$79,000 Komatsu PC220LC-8, ‘06, 5,300 hrs....................................$79,000 Komatsu PC228USLC-1, ’99, 4,400 hrs ..............................$54,500 Komatsu PC228USLC-8, ’12, 3,449 hrs ............................$155,000 Komatsu PC228USLC-10, ’14, 923 hrs ..............................$186,599 Komatsu PC240LC-10, ‘14, 727 hrs ..................................$160,000 Komatsu PC300LC-6, ’97, 6,802 hrs....................................$40,000 Komatsu PC300LC-7, ’02, 6,764 hrs....................................$90,000 Komatsu PC300LC-7 w/Shear, ‘06, 7,463 hrs ..................$265,000 Komatsu PC300LC-7EO, ’07, 8,139 hrs ..............................$60,000 Komatsu PC300LC-7EO, ’06, 7,736 hrs ............................$110,000 Komatsu PC300LC-8, ‘09, 9,584 hrs..................................$119,000 Komatsu PC360LC-10, ’12, 1,148 hrs................................$264,500 Komatsu PC400LC-6, ‘02, 13,868 hrs..................................$49,000 Komatsu PC400LC-7, ’06, 10,541 hrs..................................$76,500 Komatsu PC400LC-7EO, ’07, 10,905 hrs ............................$92,500 Komatsu PC400LC-7EO, ‘07, 10,448 hrs ............................$99,500 Komatsu PC400LC-8, ‘08, 7,118 hrs..................................$127,000 Komatsu PC400LC-8, ‘09, 6,677 hrs..................................$140,000 Komatsu PC490LC-10, ‘13, 2,977 hrs................................$268,999 Komatsu PC490LC-10, ‘12, 3,136 hrs................................$265,000 Komatsu PC490LC-10, ‘12, 4,306 hrs................................$245,000 Komatsu PC490LC-10, ‘12, 5,371 hrs................................$239,000 Komatsu PC490LC-10LR, ‘10, 4,720 hrs ..........................$289,500 Komatsu PC600LC-7, ’05, 10,328 hrs................................$199,500 Komatsu PC600LC-8, ’06, 10,478 hrs................................$199,500 Komatsu PC650LC-3, ’89, 20,397 hrs..................................$36,200 Komatsu PC750SE-6, 12,835 hrs ........................................$39,000 Volvo EC220DL, ’13, 2,151 hrs ..........................................$134,500 Volvo EC380DL, ‘11, 4,017 hrs ..........................................$150,000 Volvo EC380DL, ‘11, 2,847 hrs ..........................................$155,000

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call AJ Perisho (217) 789-7711 • Email: aperisho@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 â€˘ July 2, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke â€˘ (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ÂŽ

View our complete Used & â€œLike Newâ€? inventory at McCannOnline.com

Clean, reliable equipment

Competitive rates

Rent by the day, week, or month

Illinois

Delivered to your job site

Addison 630-627-0000 Bolingbrook* 630-739-7770

2012 Case 850L, s/n NCD80092, 1480 Hrs, Cab w/Heat & AC, 124â€? Blade, 24â€? Grousers .. ............................................................$89,800

2012 Case Cx160C, s/n DAC160K6NCSAF1112, 2500 Hrs, Cab w/AC, 9â€™11â€? Arm, 24â€? Shoes, Single Acting Hyds, Coupler, Warranty through 03/17......$118,900

2012 Case CX350C, s/n DAC350K6NCSAP1212, 2007 Case SV208, s/n DDD002010, 1600 Hrs, ROPS, 66â€? Wide Smooth Drum Roller .... 2150 Hrs, Cab w/AC, 10â€™8â€? Arm, 32â€? Shoes, Single Acting Hyds, Coupler, Warranty through ............................................................$55,850 07/17 ................................................$223,900

Chicago 312-942-9200 Crestwood 708-597-3110

CX130 Excavator

CX160 Excavator

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI $475/Day, $1,425/Week, $4,275/Month

MC r h EJH EFQUI $580/Day, $1,740/Week, $5,220/Month

MC r h EJH EFQUI $755/ Day, $2,265/Week, $6,795/Month

McHenry* 815-385-0420

Rent Today!

Wauconda 847-526-9444 2012 Case CX210C, s/n DAC210K6NCSAH1134, 1820 Hrs, Cab w/AC, 9â€™8â€? Arm, 32â€? Shoes, Double Acting Hyds, Coupler, Warranty through 03/17......$136,890

2006 Case 580SM, s/n N6C412119, 4600 Hours, Cab w/ Heat and AC, 4 WD, Ext-hoe, Ride Control, Two Lever,82â€? Bucket, 12â€? and 24â€? Bkt ................................................$42,900

Case 580L, s/n JJG0247133, 5550 Hours, Cab w/Heat, Two Lever, Ext-Hoe, 4WD, 18 inch Backhoe Bkt, 82inch front Bkt ....$24,500

CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

Case 410, s/n N8M494216,1455 Hours, Rops, Manual Coupler, New engine @ 1415 Hours, 10 x16.5 Tires, 66â€? Bucket ......$16,000

Indiana Schererville* 219-865-6545

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

*Case authorized dealer location

1985! e c n i S

NEW, USED & REMAN PARTS 2014 Mustang 2044 skid with 1,450## Cap, O ROPS, H/F Ctrls, & Block Heater. 500hrs. O-

2013 Mustang 2056 Series II skid with 2,050# Cap, Cab, Heat, Joystick Ctrls, 2Speed, & PowerTach.

2013 Mustang 2076 skid with 2,200## Cap, O-ROPS, H/F Ctrls, 2Speed, Aux Hyd, & Block Heater.

,' ÂŤ

KUV ,' ÂŤ

KUV ,' $ÂŤ

2013 Mustang 2076 skid with 2,500# Cap, O-ROPS, Joystick Ctrls, 2Speed, & PowerTach.

2013 Mustang 2076 skid with 2,500# Cap, Cab, Heat, Joystick Ctrls, 2Speed, & PowerTach.

2013 Mustang 2076 skid with 2,500## Cap, Cab, Heat, A A/C, /C, Joystick Ctrls, 2Speed, & PowerTach.

KUV ,' ÂŤ

KUV ,' $ÂŤ

â€˘ â€˘ â€˘ â€˘ â€˘ â€˘ â€˘ â€˘

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

www.RBusedParts.com CALL JENNIFER TODAY! 2015 Takeuchi TS60V skid with 2,000# Cap, Cab, Heat, Joystick Ctrls, 2 Speed, Quick-

2015 Takeuchi TS60V skid with 2,000# Cap, Cab, A/C, Joystick Ctrls, 2 Speed, QuickTach. 120hrs.

2015 Takeuchi TS70V skid with 2,635# Cap, Cab, A A/C, /C, Joystick Ctrls, 2 Speed, QuickTach.

Tach. KUV ,' ÂŤ

,' ÂŤ

KUV ,' ÂŤ

- - _ 'HV 0RLQHV Ä &HGDU 5DSLGV Ä :DWHUORR Ä $PHV _ ZZZ Z VWDUHTXLS FRP

(888) 288-1052 jennifer@RBusedParts.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 7

PAVERS / ROAD WIDENERS BOMAG CR362L - ‘14, 623 Hrs, Track Paver, Stretch 16 Electric Screed, Topcon V System and More, #C000555 ............................................................................................................$285,510 BOMAG CR452L - ‘15, 275 Hrs, Rubber Tired Paver, w/Stretch 20E, Top Con Controls $338,500 BOMAG CR662RM - ‘15, 140 Hrs, Material Transfer w/Hopper, #C000763 ....................$474,639 GOMACO GT6300 - ’00, Curb And Gutter Machine, 42” Trimmer Head w/ Hydraulic Raise/Lower Shift, 16’ Conveyor, 36” Stroke Legs, And More..............................................................$37,823 GOMACO RC240-24 - ‘15, 11 Hrs, Self Propelled Rubber Tired Placer to - 28 ft w/24” Belt.......... ........................................................................................................................................$112,000 LEEBOY 8500 HD - ‘00, 2915 Hrs, Hatz 3 Cylinder, Diesel Engine w/8-15’ Legend Propane Screed Electronic Grade Controls, Ready to Work, #C000969..........................................$28,900 MIDLAND SPD6 - ‘15, 245 Hrs, Right and Left Discharge 1-6 ft, Hyd Strike Off, Hyd Pushrollers, Washdown System, #C000820 ......................................................................................$129,950 MIDLAND SPR6 - ‘15, 32 Hrs, Right Hand Discharge, 1-6ft, # C000914 ........................$117,935 MIDLAND SP10 - ‘03, 3682 Hrs, Dual Discharge, Deere Powered, ***3-1ft Ext, 4-2ft Ext, 2-3-4ft Hyd Ext, #C000926 ..............................................................................................$69,950 P.O.R. items may be on rent causing pricing and hours to vary.

MILLING MACHINES BOMAG BM1200/35 - ’15, 225 Hrs w/Tracks, 3ft and 4ft Drum, Front Conveyor, #C000846 ........ ........................................................................................................................................$482,510 CATERPILLAR 950G - ‘03, Transfer Station Machines, Solid Tires ........3 From $31,950-$39,950

CRUSHING AND SCREENING KAFKA TRI PACK CONVEYOR - ‘14, 36” x 70’ ................................................................$115,950 KPI FT4250 CC - ‘06, Track Mounted Impactor Plant, 42” x 50”, 4 Bar Rotor Impactor, Finger Grizzly On 50” x 18’ Step Deck Variable Speed Feeder, 6’ x 12’ 2-Deck Screen, 48” x 40’ End Discharge Conveyor, All Hydraulic Plant, #C000974 ......................................................$149,950 NEW SANDVIK CJ412 PORTABLE JAW PLANT - ‘14, 47” x 33” + Much More ......................P.O.R.

ROLLERS SAKAI R2H2 - ’15 301 Hrs, 84”, 3 Wheel Static, #C000786 ................................CALL FOR PRICE SAKAI SW652 - ‘ 15, 268 Hrs, 58” Double Drum, Vibratory Rollers, #C000744..............$72,505 SAKAI SW990 - ’14, 721 Hrs, 84” Double Drum Vibratory Roller, #RR10133 ................$116,335 SAKAI SW502 - ‘13, 801 Hrs, 51’ Drum 9000 lb remaining std and or eptw warranty, #C000212 ..........................................................................................................................................$35,148 SAKAI SW300 - ‘13, 149 Hrs, 40” Double Drum Vibratory Roller, #C000211, S/N 40156 ............ ....................................................................................................................................$33,819.31 SAKAI GW750-2 - ’14, 387 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ................ $112,200 *Comes with any remaining standard and 3 year extended power train warranty.

EXCAVATORS GRADALL XL4100 - ‘98, 8884 Hrs, Workable, as is, #62013A, S/N 413282 ....................$25,000 GRADALL XL4100 II - ‘06, 13,111 Hrs, Good Condition, #C000922..................................$58,500 GRADALL XL4100IV - ‘15, 665 Hrs, 6x4 Highway Wheeled Excavator, Tier 4 Engine, Bucket Carrier, #C000740 ..........................................................................................................$284,156

Contact Tim or Marty in Illinois

1-800-307-0221

treuss@finkbinerequipment.com mahrendt@finkbinerequipment.com Photos & Detail Descriptions visit: www.finkbinerequipment.com

GROVE RT880E 80 TON CAPACITY ROUGH TERRAIN CRANE, WITH A 41’ TO 128’ BOOM, 33’ TO 56’ BI-FOLD SWINGAWAYS, MAIN AND AUXILIARY HOISTS, BLOCK AND BALL. 2008 TO 2015 MODELS AVAILABLE, FROM $385,500

LIEBHERR R954BHD W/ LABOUNTY MSD4500R SHEAR

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for:

GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT JCI K-400 PORTABLE CONE CRUSHER, 400 HP Electric Feed Conveyor, Side Discharge Conveyor, Hyd. Leveling Jacks, Tri-Axle Running Gear, 2006....................................................................................................................$345,000 JCI 6X20TD PORTABLE SCREEN PLANT, Underscreen Discharge Conveyor, Two (2) Cross Conveyors, Electric Control Panel, 2012 ............................................................................................................................................$175,790 CEDARAPIDS 4136 PORTABLE TWIN ROLL PLANT, Allis 5’x16’ SD Screen, Cummins V-12 Power, Tandem Axle Chassis, Hydraulic Leveling ..................................................................................................................................$61,000 METSO/NORDBERG MODEL HP300 CLOSED CIRCUIT PORTABLE CONE PLANT, with a 6'x20' Triple Deck Screen. 2003 Model Year ................................................................................................................................................$360,000

CRANES GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................$124,500 GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1995, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’ swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$139,500 AMERICAN 5300, 1988, 70 Ton Crawler Crane, Cummins w/3 Stage Converter, CLL on One Drum, Third Drum, Independent Travel, 130’ Boom, 30’ Jib ................................................................................................$139,500

SCRAP HANDLING EQUIPMENT LIEBHERR R954BHD WITH A LABOUNTY MSD4500R SHEAR, Carrier and shear have been refurbished ..CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113 Visit us at: www.amstate.com

Page 8 â€˘ July 2, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

MINNESOTA Burnsville 800.552.1189 Duluth 800.835.6225 Mankato 800.862.6225 Rochester 800.562.1505 T Roseville 800.704.0935 St. Cloud 888.310.6225

Renting or buying Volvo has you covered

Some companies have you choose power or fuel efficiency. You chose both.

XXX OVTTHSQ DPN

Uptime is not optional â€“ we make sure you never have to choose between performance or productivity. We worko hard to ensure you spend you are . more time on the ajob site and less time in the shop. Whether o buying or renting, Volvo guarantees the same quality, power & durability for all machines. Choose the equipment you need from a name you trust â€“ Nuss Truck & Equipment

A L

Smart Works.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . . . . . . . . . . . .$42,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500 COMPACTORS

IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean $69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 LANDSCAPING

Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500 CRAWLER LOADERS

Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000

OFF ROAD HAULERS Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 CRAWLER TRACTORS

Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready . .CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . .$159,000 TRUCKS & TRAILERS

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL AIR COMPRESSORS

IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL SPECIALS

(12) Allmand Light Plants, 2008-2010, diesel, s/a towtype, (4) MH lights, excellent . . . . . . . . .From $5,200

(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, BACKHOES winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000 Case 580L Rubber Tire Loader Backhoe, 1997, (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea. DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, CRANES Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 MISCELLANEOUS Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom (2) Balderson Broom Attachment for Cat IT Machines, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. MOTOR SCRAPERS

ATTACHMENTS Cat 613C Water Wagon, 1994, 5000 gal drop tank, BUCKETS ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 PC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good Over 100 Excavator, Loader, Specialized & Grapple condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Buckets in Stock Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice -Call For Your Needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, HYDRAULIC EXCAVATORS excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick couOthers Available Call pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000 Prices Are Negotiable - At Your Inspection Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC. operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER

Page 10 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Beginning the Task…

Partnership Helps Team Rubicon Milwaukee Gets Train New Operators for Disasters $1M to Replace Lead Pipes MILWAUKEE (AP) Milwaukee is getting a $1 million state loan to begin the costly task of replacing 70,000 lead water pipes throughout the city. Public works officials say the priority is replacing pipes to 385 state-licensed day care centers in Milwaukee, since none of the city’s public schools get their water through lead pipes. The work will take three years. The Milwaukee Journal Sentinel reported it would cost $500 million to $750 million to fully replace all the city’s lead service lines, which connect water mains with residences built before 1951. The work might take three to five decades, though the timetable could be sped up if federal funds become available. Absent disturbances from construction projects, which can increase lead levels, tests confirm Milwaukee’s tap water is safe to drink. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Fargo, N.D. … Case Construction Equipment, Southeastern Equipment and Paladin Attachments provided equipment and product support to Team Rubicon as part of MOBEX Motor City, a five-day training exercise.

Case Construction Equipment, Southeastern Equipment and Paladin Attachments provided equipment and product support to Team Rubicon as part of MOBEX Motor City, This was an operator training event that combines Team Rubicon preparation for disaster response efforts with community improvement. In this case, the neighborhood cleanup took place in Detroit, Mich. It was a five-day training exercise that trained Team Rubicon members in damage assessment, chainsaw use and heavy equipment operation.

A five-day training exercise trained Team Rubicon members in damage assessment, chainsaw use and heavy equipment operation.

Command, general staff and strike team training also took place as part of Team Rubicon’s largest training mobilization to date. Case and Southeastern Equipment provided three excavators and three skid steers to the event, and Paladin Attachments donated two grapple buckets to Team Rubicon for use in future training and disaster response operations. “More than 100 Team Rubicon members participated in the largest training mobilization we’ve ever had,” said Jason Ferguson, deputy director of training and exercise, Team Rubicon. “Heavy equipment training remains one of our most important disciplines, and events like this provide both a safe and realistic environment for what our teams will face in disaster response deployments. We’re able to help improve real communities in the process, which is the driving force in all we do.” The work, performed in conjunction with Motor City Blight Busters, included the clearing of trees and other debris to return abandoned lots to nature in Detroit’s Brightmoor neighborhood. For more information about Team Rubicon and its disaster response work, visit TeamRubiconUSA.org. For more information on Case, visit CaseCE.com. For more information on Southeastern Equipment, visit SoutheasternEquip.com. For more information about Paladin Attachments, visit PaladinAttachments.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Court Affirms Order to Stop Work on Ring Levee FARGO, N.D. (AP) An appeals court has sided with a federal judge who ordered the Fargo-Moorhead Diversion Authority to halt construction on a ring levee south of Fargo until an environmental review is completed. The Eighth Circuit Court of Appeals in an opinion issued June 20 sided with U.S. District Judge John Tunheim’s May 2015 decision that the law requires all federal and state environmental reviews be completed before construction. Opponents of the planned $2 billion Red River diversion filed a lawsuit against the dike project, which is meant to protect structures in the Oxbow, Hickson and Bakke areas that would be flooded by a staging area in times of high water. The diversion authority had argued the ring dike was separate from the overall project. An attorney for the authority didn’t immediately respond to a request for comment. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 11

NORTH DAKOTA Bismarck 701.250.4882 Fargo 701.271.2360 Minot 701.839.4020 W i l l i s to n 701.570.5309

GEORGIA Buford 678.318.9500 Savannah 912.964.8079

SOUTH CAROLINA Nor th Charleston 843.414.1120 Columbia 803.791.0740 Piedmont 864.704.1060

NORTH CAROLINA A sheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710

TENNESSEE Chattanooga 423.308.7940 Knoxville 865.525.1845

Some companies have you choose power or fuel efficiency. You chose both.

Volvo developed the industr y’s first fuel efficiency guarantee so you never have to compromise on per formance or productivity. And with CareTrack machine monitoring, you can focus your attention on more impor tant things — like growing your business. Get the details aatt volvoce.com/smartfuel.

ascvolvo.com

Page 12 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

800-333-5993 Chase Lang Ext. 2210 clang@altorfer.com Corporate Office Cedar Rapids, IA.

Locations in Iowa, Illinois & Missouri BUY • SELL • CONSIGN • RENT

Complete inventory & photos at:

www.altorfer.com

2008 CAT 330DL, S/N MWP02385, 162U018, 7502 Hrs.... ..................................................................................$93,500

2008 CAT 140M, S/N B9D00705, 148U017, 4093 Hrs ...... ................................................................................$132,000

2009 CAT 324DL, S/N JJG01069, 142U085, 4539 Hrs ...... ................................................................................$132,000

2013 CAT 259B3, S/N YYZ04738, 166U035, 895 Hrs ........ ....................................................................................$38,000

Hydraulic Breakers Padding Buckets CUT Multi Crushers

2012 CAT D6T LGP, S/N ZJB00526, 151U051, 3221 Hrs .. ................................................................................$253,000

1991 CAT D9N, S/N 1JD00963, 151U087, 11,237 Hrs ...... ..................................................................................$89,000

1975 CAT 130G, S/N 74V00615, 158U029, 3739 Hrs ........ ..................................................................................$31,000

2012 CAT 950K, S/N R4A00470, 144U094, 2157 Hrs ........ ................................................................................$220,000

2005 DEERE 410G, S/N X946688, 155U047, 6745 Hrs...... ..................................................................................$32,000

2012 CAT CS54, S/N C5R00615, 1412U013, 610 Hrs........ ..................................................................................$99,000

Pulverizers Compactors Auto Lube Kits

Learn more about our full line of attachments:

OkadaAmerica.com (800) 270-0600

Posey County Works on Plan to Ask for $1M FUNDS from page 1

based on individual projects. Half of the available $150 million must go to rural counties. Posey County is working on its application and plans to ask for $1 million. Warrick County officials are considering which projects to write proposals for. Commissioner Don Williams said any money that the county gets will likely go toward repaving roads for economic development purposes. Evansville Mayor Lloyd Winnecke said the city spent about $1.8 million on infrastructure projects in 2015, down from previous years. Evansville plans to apply for the grant money for additional projects. The Indiana Department of Transportation officials have announced the grant program will be extended until July 29 due to high volume of interest from across the state. Officials expect to notify the communities that have won grants by the end of August. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 13

Calll us tod day! Doug Mehner / Bryan Ganger

(866) 485-71 7180 ww ww.RBused.com

Celeb bratiing g our 30th Year!

2011 KOMATSU D37EX-22, #82569, OROPS, 2012 KOMATSU D51EX-22, #82389, NEW PAINT, COMPLETE NEW U/C, SERVICED, CAB/AC, PAT BLADE, RIPPER, KOMTRAX, NEW CUTTING EDGES, 1,800 HRS ....$73,450 1,200 HRS......................................$184,500

2007 KOMATSU D61EX-15, #80743, 2006 KOMATSU D65EX-15E0, #92285, CAB/AC, PAT BLADE, 24” SHOES, DRAWCAB/AC, RIPPER, 26” SHOES, SEMI-U BAR, OPEN CENTER, 4,650 HRS ..$129,500 BLADE, SWEEPS, 9,000 HRS ............$CALL

2011 KOMATSU PC138US LC-8, #82184, CAB/AC, HYD THUMB, BLADE, ROADLINERS, REAR CAMERA, KOMTRAX, 3,900 HRS$139,500

2006 KOMATSU PC200 LC-8, #82111, CAB/AC, 9’7” ARM, 31.5” TRACKS, 4,000 HRS................................................$121,500

2014 KOMATSU PC210 LC-10, #82494, 2013 KOMATSU PC240 LC-10, #82717, CAB/AC, 31.5” TRACKS, 9’7” ARM, AUTO CAB/AC, 19’ BOOM, 15’ ARM, 31.5” SHOES, GREASER, KOMTRAX, 900 HRS....$169,500 AUX HYD, QC......................................$CALL

2007 KOMATSU PC300 LC-8, #81926, CAB/AC, 10’ ARM, REAR CAMERA, 7,000 HRS................................................$149,500

2014 KOMATSU PC360 LC-10, #82657, 33.5” SHOES, 10’ ARM, 1,600 HRS ..$CALL

2008 KOMATSU PC400 LC-8, #91887, CAB/AC, 2008 KOMATSU PC78MR-6, #81717, 35.5” TRACKS, 13’ ARM, JRB QC, AUX HYD, CAB/AC, ROADLINERS, 8’ ARM, HYD KOMTRAX, REAR CAMERA, 8,000 HRS$169,500 THUMB, 3,600 HRS ........................$79,500

2007 KOMATSU WA100M-5, #81854, CAB/AC, QC/BKT/FORKS, LSD AXLES, 1,500 HRS..................................................$93,500

2004 KOMATSU WA250-5, #81867, CAB/AC, 2007 KOMATSU WA320-5, #82063, CAB/AC, 2011 KOMATSU WA380-6, #81996, CAB/AC, QC/BUCKET, 4,100 HRS ..................$99,500 GP BUCKET, 3RD VALVE, 4,450 HRS ............ GP BKT, 23.5-25 TIRES, KOMTRAX, 7,500 ......................................................$119,750 HRS................................................$129,500

Page 14 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Roland Machinery Co. Hosts Intelligent Machine Demo

oland Machinery Co. hosted an intelligent machine control demonstration at its location at 604 Stokely Drive, Deforest, Wis., on June 15. Lunch was provided at the event, and company representatives had Komatsu dozers and excavators, equipped with new intelligent machine technology, on site for customers to learn about and operate. The intelligent machines are designed to help customers increase their production, improve their performance, lower their costs and provide a high-quality finished product on their job sites. Kyle McDowell, the technology solutions expert of Roland Machinery’s fleet of intelligent machine control machinery, was one of the representatives on hand to help customers. He explained that intelligent machine control is an integrated technology for bulldozers and excavators. “Basically, it’s taking any kind of GPS machine control feature, any kind of machine automation feature, and integrating it into the machine directly from the factory,” said McDowell. “There are no wires and no extra components bolted on the outside of the machine. It also means you are only dealing with one product support source. You are dealing specifically with the Komatsu distributorship as far as all forms of support go — everything from GPS grade control products, all the way down to the machine control and the machine maintenance itself.” Access to distributorship technology solutions staff comes standard with the D61PXi-size dozers and larger and all excavator models with integrated technology. This staff can remotely log in and support the GPS machine control systems. This support also is optional on smaller dozers with integrated technology. As long as the staff has a cellular connection, they can remotely control the GPS monitor allowing the staff to diagnose problems, walk an operator through the control features and settings and monitor GPS performance. In the past, a contracting company had multiple sources to call when an issue would arise. Roland Machinery’s number one goal since the inception of these machines is to give customers peace of mind knowing they only need one contact for everything from oil changes to GPS. McDowell also explained the differences between the excavator system and the dozer system. The dozer system is tied in, not only to the blade automation to control the height

(L-R): Mike Salyers, senior product manager of Komatsu America Corp.; George Lopez, Gallagher Asphalt; and Dave Cruise, Roland Machinery Co., attend the event.

see ROLAND page 72

Customers had the opportunity to operate the Komatsu dozers with the intelligent machine control.

(L-R): Larry Gindville, vice president/general manager of Wisconsin division of Roland Machinery Co.; Eric Siemandel, The Kraemer Co.; and Mark Klein, Roland Machinery Co., stand in front of the Komatsu D39PKi dozer. Customers enjoy their opportunity to operate Komatsu machines with the intelligent machine control.

(L-R): Dan Strelow and Page Wollschlager, both of Terry Kohn Excavating LLC, ask Cory Campnell, Roland Machinery Co., questions about the intelligent machine control.

Kyle McDowell (L), Roland Machinery Co., and Russ Wondra, Wondra Construction Co., stand on the tracks of this Komatsu excavator.

Jenkins Davis (L), district sales manager of Komatsu America Corp., and Rob Bonham, Sauk County highway department, enjoy the event.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 15

Lull 944E-42, 9000lb, Fiat HD21, Excellent Condition ...................... 42’, 4x4, #98046............ ................$83,500 each ........................$61,000

JD 160DLC, 10’2” Arm, JD 650J, XLT, 115” PAT JD 400D, 8000 Gallon Water Tank, #74752 ...... 28” Pads, Hyd Thumb, Blade, 20” Pads, #94286 ............$89,500 ......................$198,000 #94937 ..........$121,000

JD 180CW, Duals, Hyd JD 670CH, Low Cab, Swinger Cplr, #91556 .... Air, 12’ Blade, Ripper, ...................... $109,000 #93202 ............$89,000

JD 350GLC Material JD 2112C, Carry All Bomag BW213PDH-3, Rear Pan, #75557 ........ Handler, 1111 Hrs, 84” Padfoot Drum, ........................$79,000 #52129 ..........$465,000 #92390 ............$85,000

JD 710K, Cab, Air, 4x4, JD 250D, Bed Liner, Tailgate, #98888............ Ext Hoe, Aux Hyd, 634 ......................$168,000 hours, #99440 .............. ......................$123,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 245GLC, 9’ 7” Arm, JD 755D, 22” Pads, GP 32” Pads, Hyd Thumb, Bucket, 2532 hours, 704 hours, #95039 .......... #98185 ..........$149,500 ........................$189,000

JD 9630 Scraper JD 850K, LGP, 36” JD 450DLC, 12’10” Tractor, Hi Flow, Pads, 152” Semi U Arm, 36” Pads, #52009 Autoload, #95152 .......... Blade, #75189 $194,000 ......................$285,000 ......................$169,000

JD 544K, Cab, Air, High JD 700K, LGP, 30” Lift Boom, #98184 ........ Pads, 132” PAT Blade, #94673 ..........$158,000 ......................$109,000

Page 16 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attendees Converge on Drone Focus Conference in Fargo

rone Focus Conference, the all-day, all-drones event, was held in Fargo, N.D., on June 1. Organized by Emerging Prairie, a nonprofit organization in Fargo, the event brought together a sold-out crowd of 300 attendees with numerous speakers to discuss the unmanned aerial systems (UAS) industry. RDO Integrated Controls, a division of RDO Equipment Co., was a major sponsor of the event for the second year in a row. Why Fargo? North Dakota has gained national recognition as a leader in UAS technology and business implementation. What began in Fargo as the monthly, “Drone Focus Meetup” where educators, students and enthusiasts could discuss regulations, technology and business opportunities, evolved into the fullday event. “Interest in the monthly meetups was growing rapidly,” said Greg Tehven, co-founder and executive director of Emerging Prairie. “We recognized the need for a dedicated drone conference and knew the value of it being held in Fargo where so much UAS action is happening.” With six FAA-approved test

RDO product specialists were on hand to answer any questions posed by guests of the sponsored lunch, which was provided by RDO Equipment. (L-R) are Bryan Knowlen, Aaron Brehmer, Tony Kramer, Ben Hildre and RDO Agronomist Nate Dorsey.

sites, major universities and aviation schools, and a huge presence in the agriculture and energy sectors, North Dakota is a natural home for innovation and growth in the UAS industry. Speaker Highlights John Hoeven, U.S. senator and former governor of North Dakota,

kicked off the event with a welcome address. A vocal and longtime advocate of UAS innovation, Hoeven hit home on North Dakota’s leadership in the industry, noting how the state is advancing the integration of UAS into national airspace and empowering businesses, from local startups to international corporations, to find new

John Hoeven, senator and former governor of North Dakota, speaks at the event.

applications for the technology including improving agriculture operations, delivering goods to consumers, supporting law enforcement, or securing the nation. Among the more anticipated speakers of the event was Baptiste Tripard, managing director of senseFly. His talk included a gen-

eral overview of UAS applications in agriculture, surveying, and inspections, as well as insight into the future of UAS. He illustrated the benefits of UAS with a story of senseFly’s role in a project that mapped the surface of Switzerland’s iconic mountain, the Matterhorn. What previously took

Matt Hayes, RDO Integrated Controls, speaks at the event.

see DRONE page 72

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 17

Volvo Used Equipment Contact your local dealer:

2012 Volvo EC480DL CALL

2015 Volvo L70G $162,500

2012 Volvo EC340DL $170,000

John Doe 123.456.7890 john.doe@dealer.com

2012 Volvo ECR58 $65,000 2012 Volvo A40F, 2999 Hrs............$500,000

Jane Doe 123.456.7890 jane.doe@dealer.com

Dealer Name City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 City, ST 123.456.7890 Contact your local dealer: City, ST

Aring Equipment 123.456.7890 Company, Inc. 13001 City, STW. Silver Spring Drive Butler, WI 53007 123.456.7890 City,King ST Jim 123.456.7890 262.781.3770 Mobile: 414.530.0592 City, 262.781.5053 ST Fax: 123.456.7890 Email: jking@aring.com www.aringequipment.com

2011 Volvo DD138HF 2011 Volvo ECR28 $75,000 $34,500 2012 Volvo A40F, 2999 Hrs............$500,000

2012 Volvo A40F $405,000

A40 Finance leasing available for 24 months with payments as low as $7,800 per month. Call Doug Wilson for details.

Asphalt/Pavers/Concrete Equipment

Excavators – Wheeled

Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2012 A25F 2011 Volvo L220G Model,Volvo Hours ............................................................................... $XXX,XXX CALL $247,500 Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

Excavators – Crawler Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX 2013 Volvo EC300DLR 2012 Volvo L250G Model, Hours ............................................................................... $XXX,XXX $220,000 $425,000

Motor Graders Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX Model, Hours ............................................................................... $XXX,XXX

2014 Volvo L110H CALL

DO NOT RUN COPY BELOW THIS RULE

DEALER LOGO

2012 Volvo A25F 2012 VolvoCALL A40F, 2999 Hrs............$500,000

1993 Volvo L150 $30,000

Page 18 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your local dealer:

Dealer Name City, ST 123.456.7890 Contact your local dealer: City, ST Mack Sales Sheehan 123.456.7890 & Equipment, Inc. City, E. ST60th Street North 901 123.456.7890 P.O. Box 5130 (57117) Sioux Falls, SD 57104 City, ST(605) 336-2000 Phone: 123.456.7890 Toll Free: (800) 289-6225 Fax: (605)336-2248 City, ST 123.456.7890 1810 Deadwood Ave. P.O. Box 1689 (57709) City, ST Rapid City, SD 57702 Phone: (605) 342-5694 123.456.7890 Toll Free: (800) 999-6286 Fax: City, (605) ST 342-8791 123.456.7890 38490 Highway 12 P.O. Box City, S T 1533 Aberdeen, SD 57401 123.456.7890 Phone: (605) 229-4612 Toll City,Free: ST (800) 753-6225 Fax: (605) 229-0237 123.456.7890

Some companies have you choose power or fuel efficiency. You chose both.

Volvo developed the industry’s first fuel efficiency guarantee so you never haavve to compromise on performance or productivity. And with CareT Track machine monitoring, you can focus your attention on more important things — like growing your business. Get the details at volvoce.com/smartfuel.

DE DEALER ALER LOGO

constRuction eQuiPment guide • www.constructionequipmentguide.com • July 2, 2016 • Page 19

coRPoRate HQ

elmHuRst

Joliet

oglesby

RockfoRd

Hammond

635 W. Lake Street eLMhurSt, iL 60126

16822 W. LaraWay rd. JoLiet, iL 60433

590 Mayer St. ogLeSby, iL 61348

5055 South Main St. rockford, iL 61102

6400 indianapoLiS bLvd haMMond, in 46320

call bobby falcone 630-516-4456 www.pattencat.com

USED EQUIPMENT SPECIALS

2007 CAT 328D TRACK EXCAVATOR SER#: GTN00200 $122,500

2009 CAT CS56 SMOOTH DRUM ROLLER SER#: C5S00825 $92,500

2013 CAT 349E VG TRACK EXCAVATOR SER#: KCN00292 $240,000

2004 CAT 938G WHEEL LOADER SER#: CRD00995 $69,000

AC/HEAT, Q-COUPLER, AUX HYD, CMB HYD LINES, RADIO

AC/HEAT, PRODUCT LINK, EROPS

AC/HEAT, STRAIGHT TRAVEL, 36” TRACK, REAR CAMERA, HD PKG

AC/HEAT, RIDE CONTROL, 2 VALVE

2006 CAT 277B MULTI TERRAIN LOADER SER#: MDH03980 $16,900

2002 CAT 315C TRACK EXCAVATOR SER#: CFT01221 $55,000

2013 CAT 416F BACKHOE LOADER SER#: KSF00629 $65,000

2014 CAT 950K WHEEL LOADER SER#: R4A02045 $220,000

OROPS, STANDARD FLOW, QUICK COUPLER, BUCKET

AC/HEAT, AUX HYDRAULICS, Q-COUPLER, 24” TRACKS

AC/HEAT, EROPS, EXT STICK, 4WD, GP BUCKET 1.25CYD

AC/HEAT, RIDE CONTROL, Q-COUPLER, GP-BUCKET; 4.24 CYD, RADIO

2001 CAT 315CL TRACK EXCAVATOR SER# CFT00438 $47,000

2002 CAT 950G WHEEL LOADER SER# 3JW02434 $69,500

2014 CAT 259D 2AIH MULTITERRAIN LOADER SN# FTL02591 $59,000

2013 CAT D6T LGPVPT SER# KSB01523 $199,000

AC/HEAT, STRAIGHT TRAVEL PEDAL, 10’2” STICK 28” TRACK

AC/HEAT, Q-COUPLER, EROPS, GP BUCKET (3.75 CYD)

ENCLOSED CAB, AC/HEAT, QUICK COUPLER, 2 SPEED RIDE CONTROL, AUX HYDRAULICS

AC/HEAT, S BLADE, COUNTER WEIGHT, PRODUCT LINK

2007 CAT D6RIIILGP SER# WRG00784 $75,000

1997 CAT D6R TRACK TYPR TRACTOR SER#: 9PN00643 $52,500

AC/HEAT, S BLADE, LIGHTS, ACUGRADE READY

17854 HOURS, EROPS, BLADE; S, SINGLE ANGLE TILT, TOPCON CONTROLS

VISIT

WWW.PATTENCAT.COM

FOR OUR MOST CURRENT INVENTORY LISTINGS.

Page 20 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Altorfer Inc. Hosts Open House to Celebrate New Location

ltorfer Inc. held an open house on May 25 to celebrate the opening of its new location in Springfield, Ill. Approximately 270 customers were in attendance for the event, which featured facility tours, equipment demos, door prizes and dinner from Nelson’s Catering. The company’s new facility is located at 4949 International Parkway in Springfield, Ill. Altorfer’s Springfield business was previously located at 4200 Rodger Street and moved to its new location in March. The new facility houses Altorfer’s construction, rental and on-highway truck repair services.

“We are striving to provide our customers with a best-in-class customer experience,” said Mark Hanson, vice president of Altorfer’s construction division. “We are pleased to give our construction, rental services and power systems teams the opportunity to work in a modern, well-located and professional facility. We are in position to serve our customers like never before.” For more information, call 319/365-0551 ext. 2108 or visit www.altorfer.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Altorfer hosted a grand opening event at its new location in Springfield, Ill., on May 25. The new facility is conveniently located along Interstate 72 via exit 91.

An attendee shows off his operating skills on the excavator tennis ball challenge.

Attendees demo Cat equipment while Altorfer machine specialists stand by for assistance.

Attendees operate the new RemoteTask remote control system for Cat D Series skid steer, multi-terrain and compact track loaders.

(L) Doug Edwards, Altorfer painter, drops off Altorfer customer Butch Flowers (R) and his children (L-R) Zach, Brody and Ty Flowers.

Attendees check out the antique tractors displayed by the Antique Caterpillar Machinery Owners Club.

Kevin Shue (R), Altorfer customer, and his wife talk with Josh Anforth, Altorfer’s Wacker Neuson representative.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 21

Used Equipment From a Name You Can Trust 2015 Bobcat T630

2012 Bobcat T190

2007 Bobcat S300

2013 Bobcat S590

Stk #115803-(L) A91, C/H/A, SJC, 2 Spd, HiFlo, 341 Hrs ......$51,000

Stk #122302-(A) A91, C/H/A, Pwr Bobtach, ACS, 1567 Hrs ..$36,900

Stk #41409-(S) A91, C/H/A, Pwr Bobtach, 2 Spd, 2383 Hrs ..$30,500

Stk #12650-(S) H51, C/H, 2 Spd, Severe Tires, 788 Hrs ............$31,900

2007 Bobcat S205

2006 Bobcat S160

2014 Bobcat E85

2008 Doosan DX180

Stk #49948-(L) A51, C/H/A, Pwr Bobtach, 2 Spd, 3117 Hrs ..$22,000

Stk #121548-(A) C/H, ACS, Bkt, New Tires, 1611 Hrs ..........$20,900

Stk #79106-(A) C/H/A, Hyd Thumb, Blade, 400 Hrs ............$84,500

Stk #38735-(S) C/H/A, Coupler, Thumb, 2 Way Hyd, 4525 Hrs ..$82,500

Anoka (A), MN 888-448-5266 • 763-323-1720 Loretto (L), MN 888-479-4342 • 763-479-8200 Shakopee (S), MN 877-753-6100 • 952-445-6310

www.lanoequip.com

Page 22 â€˘ July 2, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

#"/$)"3% 64& % & 26* 1.& /5

#"/$)"3% Â› Ĺ—Âš

#M B O D I B S E .B D I J O F S Z D P N 6T F E

(812) 282-2800 JON PARDUE (502) 664-4303 PHONE

Fax: (812) 282-2882

t Í›s 'Kd zKh Ks Z Í˜ tÄžĆ?Ćš ^Ĺ?ÄšÄž WD WĹŻĆľĆ?Đ˝ dĹ˝ĆšÄ‚ĹŻ Ä‚ĆŒÄžÍśtÄžĆ?Ćš ^Ĺ?ÄšÄž dĆŒÄ‚Ä?ĆšĹ˝ĆŒÍ›Ć? ĹśÄžÇ Ä?ĆľĆ?ĆšĹ˝ĹľĹ?ÇŒÄ‚Ä?ĹŻÄž ĹľÄ‚Ä?ĹšĹ?ĹśÄž Ć?ĆľĆ‰Ć‰Ĺ˝ĆŒĆš Ć?Ĺ˝ĹŻĆľĆ&#x;Ĺ˝ĹśÍś Ä?ĆľĹśÄšĹŻÄžĆ? Ć‰ĆŒÄžÇ€ÄžĹśĆšÄ‚Ć&#x;Ç€Äž ĹľÄ‚Ĺ?ĹśĆšÄžĹśÄ‚ĹśÄ?ÄžÍ• ÄžÇ†ĆšÄžĹśÄšÄžÄš Ç Ä‚ĆŒĆŒÄ‚ĹśĆšÇ‡ Ä‚ĹśÄš ĹľÄ‚Ä?ĹšĹ?ĹśÄž ĹľĹ˝ĹśĹ?ĆšĹ˝ĆŒĹ?ĹśĹ? ĆšÄžÄ?ĹšĹśĹ˝ĹŻĹ˝Ĺ?Ç‡Í˜ dĹšĆŒÄžÄž Ä?ĆľĹśÄšĹŻÄžĆ? Ĺ˝Ä¨ Ć‰ĆŒĹ˝ĆšÄžÄ?Ć&#x;Ĺ˝Ĺś ĆšĹ˝ Ä?ĹšĹ˝Ĺ˝Ć?Äž Ä¨ĆŒĹ˝ĹľÍ• Ĺ˝ĹśÄž ĹŻĹ˝Ç Ć‰Ä‚Ç‡ĹľÄžĹśĆšÍ˜

2006 John Deere 400D, 8177 hrs, a/c, heat, tailgate, rebuilt diff @ 7907 hrs, Stk #526 ........ ............................................................$99,000

2009 Liugong CLG922 LC, 3,260 hrs, A/C, heat, UC 60%, fixed thumb, plumbed for hammer. Installed REMAN HYDRAULIC PUMP on 09/24/13, Stk#568, 48,000lb ex......$47,000

2006 CAT D8T, 10,539 hrs, heat a/c, e/rops, u/c 90%, Stk# 647 ............................$179,000

dĹšÄž :Ĺ˝ĹšĹś ÄžÄžĆŒÄž Ĺ˝ĹśĆ?ĆšĆŒĆľÄ?Ć&#x;Ĺ˝Ĺś Î˜ &Ĺ˝ĆŒÄžĆ?ĆšĆŒÇ‡ ÄžÄ‚ĹŻÄžĆŒ Ä¨Ĺ˝ĆŒ /> Î˜ /E

Light Plant, #490

6104 Sable Mill Court, Jeffersonville, IN 47130

PRICE REDUCED EQUIPMENT SPECIALS 2013 Takeuchi TL230, 1186 hrs, a/c, heat, e/rops, rubber tracks, Stk #748 ..................................................................................$35,000 2014 John Deere 700K LGP, 1101 hrs, e/rops, a/c, heat, Stk #788...... ..............................................................................................$146,000 2010 Dynapac CA250, 1451 hrs, o/rops, with padfoot shell kit, Stk #793 ..................................................................................$72,000 2011 Takeuchi TB250, 1,903 hrs, manual quick coupler ........$42,000 2009 Liugong CLG936, 2430 hrs, A/C, heat, plumbed, u/c 80%, 80,000 Lb. Exc, Stk #660 ........................................................$99,000 2011 John Deere 250G LC, A/C & Heat, Hydraulic Thumb & Quick Coupler, Plumbed for Hammer, Stk#777 ..............................$149,000 2014 Takeuchi TB290, 450 hrs, e/rops, a/c & heat, plumbed for hammer, Stk #783 ..................................................................$83,000 2012 Takeuchi TL240, 1210 hrs, a/c, heat, e/rops, rubber tracks, Stk #723 ..................................................................................$39,000 2008 John Deere 400D, 40 ton capacity, 6wd, a/c, heat, 8641 hrs, Stk #651 ................................................................................$125,000 2007 John Deere 9520E Tractor, 7785 hrs, cab, a/c, heat, dual tired, rubber 80%, Stk#578 ............................................................$109,000 2006 Cat D8T, EROPS, A/C, Heat, UC 70%, Installed New Bottom Rollers, Bearings, & Rear Idlers, 10513 Hrs, Stk#647 ..........$177,000 2006 Cat D8T, 8544 hrs, Complete New Undercarriage, A/C, Heat, EROPS, Stk#643 ....................................................................$194,000 2013 Takeuchi TB235CR, 1150 hrs, e/rops, heat, a/c, hyd thumb, plumbed for hammer, Stk #750 ..............................................$37,000 2011 Rammax RX1510-Cl, 222 hrs, 33â€? drums, cable and remote control, walk behind compactor, Stk #774 ..............................$18,000 2011 John Deere 750J LGP, Trimble Ready, 80% LGP UC, EROPS, AC & Heat, Stk#790 ..............................................................$172,000

Ask about our GPS Machine Control Equipped Dozers, Graders & Excavators www.JobRentals.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 23

.com

2013 CATERPILLAR 236B3, ID# HUC0331, SN# A9H03656, 690 HOURS......................................$23,900

2006 CATERPILLAR RM300, ID# HUC0122, SN# BWR00270, 2695 HOURS ........................................$199,900

2007 CATERPILLAR D6TXL, ID# HUC0350, SN# LAY00566, 5128 HOURS ..........................................$164,800

2010 CATERPILLAR 950H, ID# HIC0182, SN# K5K03057, 4310 HOURS ..........................................$144,900

2014 CATERPILLAR 299D, ID# HUC0327, SN# GTC00475, 1257 HOURS ............................................$65,200

2010 CATERPILLAR TH255, ID# PUC0090, S/N# TBS00490, 1444 HOURS ..................................$39,900

2009 CATERPILLAR 140M, ID# HUC0120, S/N B9D01948, 4265 HOURS ..........................................$159,600

2014 CATERPILLAR 236D, ID# HUC0391, SN# BGZ00756, 65 HOURS........................................$32,600

2008 CATERPILLAR 120M, ID# HUC181, SN# B9N00183, 4290 HOURS ..........................................$119,400

2010 CATERPILLAR 980H, ID# HUC0175, SN# JMS05820, 7637 HOURS ............................................$229,900

2012 CATERPILLAR 627H, ID# HUC0287, S/N# DBW00218, 6270 HOURS ........................................$495,500

2014 CATERPILLAR 262D, ID# HUC0361, SN# DTB01351, 1760 HOURS ............................................$35,900

2009 CATERPILLAR 246C, ID# HUC0375, SN# JAY03480, 3053 HOURS ....................................$22,800

2011 CATERPILLAR 303.5DCR, ID# HUC0301, S/N# RHP01021, 1280 HOURS, CAB, A/C ........................$36,500

2014 CATERPILLAR 279D, ID# PUC0033, SN# GTL00955, 2112 HOURS....................................$51,900

2009 CATERPILAR PS360C, ID# HUC0119, SN# PJF00471, 1957 HOURS ......................................$99,900

Kansas City (844) 845-8814 • Wichita (866) 773-5581 • ContactUs@FoleyEQ.com • (316) 943-4211 International

Page 24 â€˘ July 2, 2016 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

9LVLW RXU ZHE VLWH DW EagerBeaverTrailers.com

DQG \RX UH D FOLFN DZD\ IURP JHWWLQJ DOO WKH LQIRUPDWLRQ \RX QHHG IURP RXU QHDUHVW GHDOHU Â‡ &$3$&,7< OEV

50 GSL Â‡ &$3$&,7< OEV

LO A D E R

50 GSL/BR Â‡ 6KRZQ ZLWK RSWLRQDO ZKHHO FRYHUV

Â‡ &$3$&,7< OEV

55 GSL

Â‡ &$3$&,7< OEV

50 GSL/PT Â‡ 6KRZQ ZLWK RSWLRQDO DOXPLQXP ZKHHOV

Other Standard Features of this series: â€œName Brand Tiresâ€?, currently Sumitomo Â‡ $SLWRQJ 'HFN Â‡ $OO ZKHHO DQWL ORFN EUDNHV Â‡ $LU ULGH VXVSHQVLRQ Â‡ Imron paint Â‡ +\GUDXOLF +DXOLQJ 3LQ Â‡ /RFN LQ ORFN RXW RXWULJJHUV Â‡ 5RWR ULQJV Â‡ VHDOHG ZLUH KDUQHVV Â‡ +L FOHDUDQFH VHOI OLIWLQJ JRRVHQHFN

ANNIVERSARY

1946-2016 For a quote on any model, please call 800-257-8163

>> EagerBeaverTrailers.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 25

IMAGINE WHAT’S NEXT. Register today to get the ultimate view of where construction is going. Imagine less downtime. Imagine being more efficient. Imagine seeing what’s next from over 2,500 exhibitors spread out over 2,500,000 square feet. Imagination becomes reality in Las Vegas on March 7–11, 2017— and if you make your reservation right now, you can ensure your spot at this huge event... and save!

Get the special $149 rate (and save up to $100) by registering early at www.conexpoconagg.com.

March 7–11, 2017 | Las Vegas Convention Center | Las Vegas, USA

IF IT’S NEW, IT’S HERE.

Co-located with

Page 26 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Aber’s Towing & Crane Service adds to its fleet of Grove cranes.

Aber’s Towing & Crane Service Adds New Grove to Fleet Aber’s Towing & Crane Service, founded by Miles and Alene Aber in 1950, has grown into an 18 to 20-employee operation, which divides its time equally between its hauling, towing and crane services. Jerry Aber, son of Miles and Alene, and Aaron Aber, son of Jerry, now share the responsibility of running and managing the business. The company conducts business primarily within a 50 to 60mi. radius of its home base in Ashland, Ohio. Aber’s fleet consist of light-duty and heavy-duty tow trucks, rollbacks, Landolls, flatbed and detach trailers and cranes. This wide variety of equipment in its fleet allows Aber’s to assist its customers — seldom having to turn work away because the company doesn’t have the equipment needed to perform a job. This is important to the company. Jerry Aber decided it was time to acquire a crane to fill the gap between the company’s 40-ton (36 t) and 90-ton (81 t) cranes. His concern was that if the 90-ton crane was out on a job and the 40-ton wasn’t big enough, that he wouldn’t be able to meet customer’s needs and would have to turn away work. His experience led him to see if he could locate a used crane (the company had always purchased used cranes in the past). As Jerry began the process of trying to find a used crane, he pri-

marily looked at Grove cranes because of brand familiarity — three of the four cranes in his fleet were Grove. “They produce good quality equipment and have excellent service and support for a good price,” he said. Jerry already had a working relationship with Grove’s authorized Ohio dealer, Cleveland Crane & Shovel Sales, so it was natural he start his search with them. In the past, the dealership had been very responsive to his equipment and service needs, Jerry said. One time, Jerry had a crane out of service and was able to get a Cleveland Crane & Shovel Sales technician on the phone who walked him through the process of getting the crane up and running again, without the expense of a service call. Cleveland Crane & Shovel became a Grove dealer in 2008 when Manitowoc was in the process of consolidating its dealers who handle both lines. As one of the oldest Manitowoc dealers in the United States, Cleveland Crane & Shovel was a natural choice for the Ohio market. All of the dealership’s technicians attend Grove schools, starting with Crane Systems Theory and Crane Technology & Operation. Two of Cleveland Crane & Shovel’s technicians, Joe Nanni and Carl Goins, are GMK (Grove Mobile Crane) certified, and Scott Lowries, serv-

Andrew Forepaugh (L) of Cleveland Crane & Shovel and his son Michael (R) thank Jerry Aber of Aber’s Towing & Crane Service for his business. Aber purchased the new Grove TMS 700E, 60-ton (54 t) hydraulic crane from Cleveland Crane & Shovel.

ice manager, has achieved 6.1 GMK certification. When Aber discussed his plans to purchase a used crane with Andy Forepaugh, Cleveland Crane & Shovel Sales vice president of sales, their conversation quickly turned to the benefits of purchasing a new crane instead of purchasing a used crane. The new 2016 Grove TMS 700E 60-ton hydraulic truck crane met all of the criteria that

Aber’s was looking for. The Grove TMS 700E 60-ton hydraulic truck crane is ideal for use in a wide range of applications, such as setting transformers, small generators and small pre-cast work; pouring concrete for bridge abutment footers; and loading and unloading steel coils from trucks. The crane also is well suited for truck accident recovery, which fits in nicely with Aber’s Towing &

Crane Service’s towing work. Among the many features that appealed to Aber’s are the 110-ft. foursection main boom, two winches, the one-man operation and quick set up. The crane carries its own counterweights and, with permits, is easily road transportable. The compact design is not over width or length, is powered by a Tier IV Cummins diesel engine, and can reach highway speeds of up to 65 miles per hour. Technical specifications of the Grove TMS 700E 60-ton hydraulic crane include: • 50-ton or 60-ton capacity; • A four-section, full-power sequenced synchronized MEGAFORM vertical boom with a maximum tip height of 118 ft. designed for exceptional vertical and lateral strength; • A 33- to 56-ft. folding lattice swing-away extension that is offsettable at 0, • 25 and 45 degrees with a maximum tip height of 172 ft. and stows alongside the base boom extension; • Two 20-ft. lattice extensions which increase maximum tip height to 212 ft. when employed with the swing-away extension; • A quick reeving type boom nose mounted on heavy duty tapered roller bearings with removable pin-type rope guards; • Counterweights consisting of see ABER page 36

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 27

Page 28 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

22ND ANNUAL

N.Y.S. HIGHWAY & PUBLIC WORKS

EXPO PRODUCED BY PROFILE PUBLICATIONS

WEDNESDAY, OCTOBER 19, 2016 8:30

Am TO

3:00

AmERITECH CENTER OF PROGRESS BUILDING • NY STATE FAIRGROUNDS, SYRACUSE, NY

The largest municipal expo in New York State for Town, City, Village, County, State & Other Highway & Public Works Pros! LUNCH SERVED 12:00-2:00pm Admar Supply Advance Auto Parts Air-Flo Manufacturing Co Inc. Akron Brass Company Alamo Industrial Allied Spring & Service Aquaphalt Auctions International Inc. BauVal Inc / Tech-Mix Beam Mack Sales & Service Beck Equipment Inc. Blair Supply Corp. Bobcat of C N Y – Bobcat Bobcat of C N Y - Bandit Bosch Rexroth Canada Buyers Products Company Carpenter Industries Central Petroleum Company Certified Cirus Control Systems Chemung Supply Corp. Cyncon Equipment Inc. D & W Diesel Inc. DEL Hydraulics, Inc. DewEze Manufacturing/Harper DICKEY-john Corp. Dig Safely New York

Call for Exhibit Space Today Join this Growing List of Exhibitors at the Show DSI Recycling Systems Inc. EJ USA Empire Hydraulics & Machine Filtrec Corporation Fire Service Safety Testing Inc. Five Star Equipment Fleetpride Inc. πFluid Power Service a div of Airline

Fort Miller FAB 3 Corp. Franklin Paint Co Inc. GECON Attachments Gillee’s Auto Truck & Marine GovDeals, Inc. Hawk Frame & Axle Helac Corp. Henderson Truck Equipment-NY Hybrid Building Solutions LLC IMUS/ Innovative Surface Solutions J-Tech Inc. J & J Equipment LLC J C Smith Inc. Joe Johnson Equipment (USA) Inc. Kenworth Northeast Kepner Equipment Inc. KH Industries

Lakeland Equipment Corp. Lawson Products Martin Engineering USA McIndoo Assoc/ARI-Phoenix Lifts MDI Truck Midland Asphalt Materials Inc. Milton Cat Inc. Mohawk Lifts Montage Enterprises New Horizons Petroleum Services North American Signal Company Northern Supply Inc. Nu-Look ProFinish Collision & Painting NYSAOTSOH On-Trux Ltd. Onspot Automatic Tire Chains Optronics International QPR Peirce-Eagle Equipment Co. Riccelli Northern LLC RTI Auctions RustKote LLC S&S Atlantic Division/Penn Power S & S Tractor Parts Inc. SealMaster- Buffalo Skanex Pipe Services

Produced by

Contact: Bob Buckley 800-992-7116 or E-Mail: bbuckley@cegltd.com 361 Shoemaker Road, Mohawk, NY 13407 • 800-988-1203

DOZENS OF DOOR PRIZES SMF Inc. Snap-Tite Culvert Liners Spaulding Manufacturing Stadium International Trucks STS Truck Equipment & Trailer Sales Steel Sales Inc. Sunnycrest Inc. TEC Solutions Tenco Industries Inc. The ODB Company Tracey Road Equipment Trius Inc. Traffic Safety Products, a div of Eberl Iron Works, Inc.

Truck-Lite Trux Outfitter Upstate Sweepers & Rentals Utility Auctions Vantage Equipment Viking-Cives USA Whelen Engineering Co Inc. Whites Farm Supply Winter Equipment Company Woodford Brothers Inc.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 29

2016 HD 2500

2014 Ram Service Body

Diesel Crew Cab

Bay Bridge Cube

Crew Cab, Gas only 6.4 Hemi, only 13,000 Mi.

Summer Special $53,216*

Summer Special $31,988*

Summer Special $36,988*

2016 Ram 3500

Ram 1500 Sport Crew 4x4

Snow Plow Truck

with Flatbed

MSRP $56,940

Summer Special $47,915*

Summer Special $31,988*

Summer Special $48,698*

Diesels Here

Promaster

Ram 5500

MSRP $34,965

6.4L Gas, Dump bed truck

Promaster City

Summer Special $25,488*

Summer Special $56,488*

Summer Special $28,195*

#1 Chrysler Corp. Commercial

Every Thursday June-Sept. FREE Beer, Brats & Burgers!!!

Dealer in Minnesota

The fast lane for small business.

If we don’t have it, we’ll build it for you!

From 3pm-6pm

RAM H.D. HEADQUARTERS Fury Ram Truck Center, Lake Elmo, Minnesota 651-777-1316 • Visit us at furymotors.com

18 Cabs and Chassis in Stock More Coming!

We Deliver! 32 Promasters Ready to Go!

* Pricing represents all Denver business center rebates deducted!

Page 30 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2015 E55, A91, 525 Hrs....................................................$60,000 2013 328E, 213 Hrs, Stk# M244434 ................$46,000 1994 325, 2400 Hrs, Stk# F14128....................$10,000 2001 331, Stk# F11203 ....................................$15,000 2006 35D, 1900 Hrs, Stk# F35813 ..................$24,000 2006 35D, 1850 Hrs, Stk# F35814 ..................$24,000 2015 E35, 375 Hrs, Stk# M11465 ....................$51,000 2014 E50, 300 Hrs, Stk# M11092 ....................$58,000 2015 E55, 510 Hrs, Stk# M11373 ....................$60,000 2014 S450, 30 Hrs, Stk# M11478 ....................$29,000 2014 S450, 75 Hrs, Stk# F11273 ....................$27,000 2014 S450, 74 Hrs, Stk# F11206 ....................$27,000 2013 S530, 100 Hrs, Stk# F11057 ..................$32,000 2015 S530, 70 Hrs, Stk# F13049 ....................$34,000 2014 S550, 422 Hrs, Stk# M11526 ..................$33,000 2015 S550, 50 Hrs, Stk# F11731 ....................$36,000 2014 S570, 409 Hrs, Stk# F11474 ..................$35,000

2012 T770, iT4, A91, Air Ride Roller Suspension Radio, 2250 Hrs ..........................................................................................$47,000

2014 S570, 404 Hrs, Stk# F11473 ..................$35,000 2015 S570, 333 Hrs, Stk# M13217 ..................$35,000 2014 S570, 281 Hrs, Stk# M12580 ..................$35,000 2014 S570, 78 Hrs, Stk# F12649 ....................$37,000 2014 S570, 133 Hrs, Stk# F12648 ..................$33,000 2015 S570, 253 Hrs, Stk# F13521 ..................$40,000 2013 S570, 211 Hrs, Stk# F13447 ..................$33,000 2014 S590, 441 Hrs, Stk# M11363 ..................$35,000 2014 S590, 105 Hrs, Stk# F13019 ..................$37,000 2013 S630, 476 Hrs, Stk# M15681 ..................$35,000 2014 S630, 750 Hrs, Stk# F11707 ..................$32,000 2014 S630, 52 Hrs, Stk# F11617 ....................$40,000 2014 S650, 355 Hrs, Stk# M11090 ..................$38,000 2014 S650, 11 Hrs, Stk# M24644 ....................$42,000 2011 S650, 519 Hrs, Stk# F14957 ..................$37,000 2014 S650, 297 Hrs, Stk# F12115 ..................$40,000

3915 Burdick Expressway E., Minot, ND 58703

2014 S570, H51 2 Speed Block Heater Air Ride HD Tires Radio, 133 Hrs..............................................................................$33,000

2015 S650, 50 Hrs, Stk# F13494 ....................$52,000 2014 S650, 156 Hrs, Stk# F13037 ..................$44,000 2014 S650, 167 Hrs, Stk# F13029 ..................$44,000 2012 S750, 578 Hrs, Stk# M12234 ..................$40,000 2011 S850, 650 Hrs, Stk# F11167 ..................$45,000 2014 S850, 225 Hrs, Stk# F12439 ..................$58,000 2013 T590, 896 Hrs, Stk# M11164 ..................$40,000 2015 T650, 425 Hrs, Stk# M12532 ..................$48,000 2014 T650, 280 Hrs, Stk# M18988 ..................$51,000 2014 T650, 500 Hrs, Stk# F11476....................$55,000 2011 T750, 1158 Hrs, Stk# F11456..................$50,000 2013 T750, 711 Hrs, Stk# F12150....................$52,000 2013 T750, 1019 Hrs, Stk# M12119 ................$50,000 2012 T750, 1281 Hrs, Stk# M12003 ................$48,000 2013 T750, 1799 Hrs, Stk# M11998 ................$42,000 2015 T750, 781 Hrs, Stk# M14339 ..................$52,000

2014 T750, 586 Hrs, Stk# M13326 ..................$54,000 2013 T750, 908 Hrs, Stk# F11987....................$52,000 2013 T750, 1673 Hrs, Stk# M12299 ................$42,000 2013 T750, 1200 Hrs, Stk# F12155..................$48,000 2012 T750, 1334 Hrs, Stk# F12205..................$50,000 2012 T770, 1101 Hrs, Stk# F11895..................$52,000 2013 T770, 709 Hrs, Stk# M12768 ..................$54,000 2013 T770, 890 Hrs, Stk# M12181 ..................$54,000 2012 T770, 1802 Hrs, Stk# F11641..................$49,000 2013 T770, 1914 Hrs, Stk# F13780..................$46,000 2011 T770, 2387 Hrs, Stk# F11307..................$46,000 2012 T770, 2253 Hrs, Stk# F11608..................$47,000 2012 T770, 1096 Hrs, Stk# F11623 ................$52,000 2013 T870, 1260 Hrs, Stk# M11796 ................$50,000 2011 T870, 1362 Hrs, Stk# F11379..................$57,000 2012 T870, 655 Hrs, Stk# M11630 ..................$55,000

3450 West Main, Fargo, ND 58103

Swanston Equipment www.swanston.com 3450 West Main • Fargo, ND 58103 (701) 355-5722 • Fax: (701) 293-9468

3915 Burdick Expressway E. • Minot, ND 58703 (701) 355-5723 • Fax: (701) 837-9904

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ July 2, 2016 â€˘ Page 31

563-872-4112

(DUBUQUE) BELLEVUE, ELLEVUE, IOWA

WWW.JJSCHECKEL.COM

CLEAN, WORK-READY EQUIPMENT IN IOWA - WE OWN WHAT WE ADVERTISE! RENTOR

RENTOR

BUY!

2007 SMI 516T SPYDER - $150,000 $ â€˜07 SMI 4043T CRUSHER - $215,000 (2)2009 CAT D10Tâ€™ss - $245,000 EA. 1996 CAT D9R - $225,000 2,800 Hrs Hrs,, Mobile M b l tr track, ackk, 600 TPH, 3 way way screen. s een. BBelts scr elts l llike likke Mobile TTrack rack Moun Mounted ted Impac Impact p t CCrusher, rusherr, 4,900 Hrs Hrs,, RRJG JG series series,, Low Low hhour ccomponent omppponent hhist history, ory,y, EErops, rops p, Tractorr, 7TL series, D9R PPull ull Scraper Scraper p Tractor, series, 0 hour engine. engine g . new, paint.t. Easy lifee as ttopsoil Remotee 300 TPH, CCompletely new w, OOriginal riginal g ppain Easy lif opsoil p il scr sscreen. een. Remot ompletely rrefurbished. efurbished f b h . Remot Remotee CControl. ontrol. SSingle ingle shank rippers rippers, pp , U BBlades lade d s w// twin twin tilt, tilt, Very Very good good,, RRigged igged gg ttoo newly onverted/rebuilt 631 ppullll scraper, scraper p r,, l cconverted/rebuilt control, controll, HHyd yd ffoldable oldable onveyers. RRent/Lease ent//Lease or Buy Buy.. SSide ld cconveyers. ide stack stacker er & magnet options options.. RRent/Lease ent/Lease or Buy Buy.. clean l ccondition. ondition. d From From same original owner. ownerr. pric edd separ ately l . Excellent Excellent UC. Extra Extra clean. l Ready d ttoo go priced separately. go.. OR OR OR OR O R

RENT

BUY!

RENT

BUY!

T - $164,000 2008 Deere 700J LGP - $78,000 2012 CAT D6N LGP - $ 160,000 $160,000 2012 CAT D6T LGP VPAT - $184,000 2011 CAT D6T XW VPAT 5,600 hhrs yystem 1 UC, CCat at AAccugrade ccuggrade hrs,, SSystem d GPS RReady Ready. d . 3,800 HHours, ours, GPS AAccugrade ccugr g ade rready. eadyy. Erops, Erops p , Sweeps, Sweeps, A/C, 4,100 Hours, Hours, Erops, Erops p , One One owner owner black dirt dirt machine. machine. 3,020 HHours,Cat ours,Cat heavy heavy dutyy standard standard UC, AAccugrade ccugr g ade VPat at blade blade,, Rear W Winch, inch, FFull ull OOptions, ptionns, EEx Excellent cellen ll t 1 oowner, wnerr, DDiff iff st steer, eer,, AAux ux hhydraulics, ydraulics li , Rear ar dr ddrawbar, awbar b r, Cat Cat System Syystem 1 Super Super clean, None None nicer. nicer.. Rent/Lease Rent/Lease or Buy Buy. y.. GPS rready, eady,, PPat at 6 way way blade bl blade, d , DDiff iffff st steer, eerr, Rear R dr drawbar awbar VP O riginal c ondition machine . R e nt/L ease or Buy Original condition machine. Rent/Lease UC, 1 O Owner, wner r , Excellent Ex c ellen t condition. c ondition. Rent/Lease R ent/L ease or Buy. Buy y. . w/c w/counterweight. ounterweight. OOne ne owner. owner.. Rent/Lease Rent/Lease or Buy. Buyy.. OR OR OR OR

RENT

BUY!

RENT

BUY!

2011 CAT 336EL - $200 $200,000 0,000 1,900 Hrs Original g l pain p t, 1 OOwner, wnerr, SService ervice hist Hrs,, Original paint, history, h ory,y VVery ery clean andd str straight aigh ight machine from from good g home. BBest est pric et. Rent/Lease Rent/LLeasse or BBuy price i e iin the h mark market. Buy..

2013 CAT 329EL - $ $168,000 , 3,800 Hrs ully lly lloaded d d, 10â€™6â€?â€? stic stick ckk, HHydraulic yddraulic q Hrs,, FFully loaded, stick, l quick ccoupler, oupler p r,, Auxiliary Auxiliar ili y hhydraulics, ydr d aulics, Long Long o g and wide id UC UC. Ownerr, vvery ery clean. RRent/Lease ent/L 42â€?â€? buck bucket. b ket. 1 Owner, /Lease or Buy Buy. B y.. OR

RENT

RENTOR

BUY!

2001 CAT 777D - $280 $280,000 0,000 FFully ully lly rrefurbished. efurbished f b h d. $100,000 $ spent. spennt. Very Very good tir tires, i es, details andd ppic pictures i tures on our w website. ebsit b e. Nicee tr NNic truck, uckk, RRent/Lease ent/L /Lease or Buy Buy..

BUY!

RENT

BUY!

2012 CAT D6T LGP - $225,000 1,300 HHours, ours, AAccugrade ccugr g ade GPS rready, eady,, EErops, rops, A/C, DDiff iff st steer, eerr, CCAT AT syst system y em 1 UC, OOne ne oowner, wnerr, super clean, lik likee new w machine machine.. RRent/Lease ent/Lease or Buy Buy. y.. OR

RENT

BUY!

2011 CAT 349EL - $225,000 4,600 HHours, ours, OOriginal riginal ginall ppain paint,t, 1 OOwner, wnerr, QQuick uickk ccoupler, oupler p r,, SService ervice hist history, ory, VVery ery clean l and str straight aigh g t machine hi frfrom om goodd home ent/L Buy. home.. RRent/Lease /Lease or Buy.

RENTOR

BUY!

32 20EL - $142,000 2012 CAT 320EL 2011 CAT 324E 324EL EL - $149,000 , 2012 2 012 Komatsu PC360LCPC360LC-10 10 - $ $165,000 165,,000 Hours, 46â€?â€? bucket, b ket, 9â€™6â€?â€? stick, buck ear view 2,200 Hours, stickk, A/C, rrear Only ly 2,100 , hrs. hrs h . Fully Fully lly loaded, loaded edd, Auxiliary Auxiliar Only l y hydraulics. hhyyddraulics l . 4,700 HHours, ours, OOne ne oowner, wnerr, OOriginal riginal g paint, p t, All pain All the h available, Very machine, options! Hy ccamera, amera, Aux Aux hydraulics hydraulics available, Very nice nice machine, Quick Quick i k coupler. coupler pl . 9â€™9â€?â€? stick, stick i k, longg and wide id UC. Hydraulic ydraulic thumb, thumb, Quick Quickk coupler, coupler pl r,, 53â€?â€? Bucket. Bucket. Fully serviced, serviced, Excellent Excellent ccondition. ondition. Rent/Lease Rent/L /Lease or Buy Buy.. Ex tra clean, single oowner! wner! RRent/Lease ent/L Buy Extra i /Lease or Buy. B y.. Fully EExtra Ex tra clean! RRent/Lease ent/Lease or Buy Buy.. OR OR

RENT

BUY!

, EA. (2)2012 ) CAT 740Bâ€™s - $ $188,000 , EA. (3)2006 CAT 740â€™s - $138,000 BB1PP SSeries. eries. All All 3 bought bough ght new together. together g h r.. 9-10,000 ffrframe ame hhours; 3,000 aatt id d . OOriginal dle dl riginal g l pain idle. paint,t, FFull ull ser service vice hist history, ory, GGood oodd rrubber. ubber. FFully ully lly loaded loaded.. FFully ullyy loaded adial tir es. SSuper uper p loaded,, A/C, 90% RRadial tires. SSolid olid machines, machines, ready ready d to to go. go. Rent/Lease Rent/LLease or Buy. Buy B . clean tr ucks k rready eady ttoo go ent/Lease or Buy BBuy. y.. trucks go.. RRent/Lease

RENT

BUY!

2012 CAT AT 980K - $155,000 (3)2001 ) CAT 627Gâ€™s 27Gâ€™s - $195,000 , EA. 13,500 frame frf ame hhou hours, urs, 4,200 w were ere idle idle. dl . Ma Matching tching h g TTitan itan PPush ushh ppullll scr apers p . AAllll 3 bough g t new ttogether. ogether g h . scrapers. bought Tires. 7 YYard ard GP str straight aigh g t edge g buck bucket. et. TTA2 A2 ttested. ested. CClean, lean, one oowner wner mach hines!! Good Goodd 33.25+29 29 rubber. rubber bb . LD250 Tires. machines! OOriginal riginal pain paint/owner. t/owner. CClean lean l & str straight t aigh i ht machine machine.. RRent/Lease ent/Lease or Buy. Buy.

VISIT OUR WEBSITE FOR DETAILED PHOTOS AND DESCRIPTIONS! WWW.JJSCHECKEL.COM The highest quality, most complete, most detailed, proprietary reman program in the world! SSR SCHECKEL SERIES REMAN MACHINES S IN PROGRESS NOW! Â˜ jEk 11R 7P Â˜ jEk 11R 7PZ Z Series Series Â˜ jFk 10Râ€™s Â˜ jFk 10Râ€™s AK AKTT SSeries eries Â˜ jFk M 5 Â˜ jFk M 5 7TL & ABK Series Series We We also perform perform Cat Cat 777D, 777D D,, Cat Cat 992 D/G & Cat Cat 16 G/H Remans Remans on a regular regular basis. basis. C Custom ustom builds performed performed tto o meet meet customerâ€™s customerâ€™s exact exa act requirements, requirementss, specs, specs, and and budgets. budgets. Call Call 563-872-4112 or ema emailil sales@jjscheckel.com sales@jjjsche jscheckell.com for a brochure! brochure!

J.J. SCHECKEL RENTS

No Borders, No Boundaries. Partner with us! Your source for Nationwide Rentals:

Â˜ EX GX 14 J 106* 1064#%65X #6 Â˜ EX GX 14 J 106* 1064#%65X #6 Discounted Discounte d Rent Rates Rates '06 74%*#5' 26+105X 9+6* ENNÂ† Â˜Â˜ '06 74%*#5' 26+105X 9+6* ENNÂ† FFinancing inancing Â˜Â˜ *146 14 10) '4/ '#5'5 *146 14 10) '4/ '#5'5 Â˜Â˜ ' #-' +6 61 '06 (41/ 75 ' #-' +6 61 '06 (41/ 75 Quick Q uick Mobilization - D Delivered elivered to to yyour our sit site, e, set up, up p, and and ready read dy tto o go. go. Cost Cost Efficient, Efficientt, Expa Expand nd yyour our capabilities capabilities with our equipment! equipment!

Ph: 563-872-4112 | Fax: 563-872-5058 | sales@jjscheckel.com sales@jjscheck s el.com | 21582 Hwy 62,, Bellevue, Bellevue, Iowa Iowa 52031 | www.jjscheckel.com www w w.jjscheck .jjscheckel.com

Page 32 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Case 580SL, 6870 Hrs, 82” Bkt w/Cutting Edge, stk# P09881 $26,700

Case 580L, 7372 Hrs, OROPS, 4 Stick Controls, stk# P09579 $19,700

Case 580SL, 6422 Hrs, 4x4 w/18” Bkt, Stk# P08418 $23,700

2012 Case SR175, 1335 Hrs, OROPS, H Pattern Controls, Stk# P07497 $28,700

Case 70XT SSL, 2700 Hrs, OROPS, H Pattern Pilot Controls, Stk# P09546 $22,700

2007 Case Construction 580SM III, 3944 Hrs, Stk# P06371 $47,700

Case TR270 CTL, 478 Hrs, Tier 4 Final, 72” Bkt, Cab w/Heat & A/C, Stk# P09381 $44,700

2014 Case 580SN T4A, 172 Hrs, 4WD, Cab w/Heat & AC, Stk# P10111 $91,250

JULY 28, 2016 9AM - 5PM 5 Miles East of Lincoln on Old Cheney Road

Learn more:

www.NELICA.org

9AM - 5PM Expo Open to Visitors • 11AM - 2PM Lunch Stand on Grounds • 5PM Expo Closed

Equipment on display and/or in the field include: • Construction, Forestry, and Commercial Worksite Products • Intelligent Dozers, Excavators, Motor Graders • Wheel Loaders, Skid Steers and Track Loaders • Skid Loaders, Mini and Large Excavators • Tiling Machine • Maxi Stringer Trailer • Products for drainage water management, Intakes • GPS and Lasers • Seed, Erosion Control Materials Platinum Sponsors • Self-Propelled Drainage Plows, Add on Drainage Plows ACCESS OVER 30 VENDORS AT ONCE HANDS ON TESTING OF EQUIPMENT Attendees must be at least 18-years of age to operate equipment. LATEST INNOVATIONS AND PRODUCTS FREE ADMISSION OPEN TO THE PUBLIC NETWORK WITH CONTRACTORS AND VENDORS

Gold Sponsors

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 33

goodbye downtime YOU STOP PRODUCTION, YOU LOSE MONEY. It's a challenge to keep things moving when you burn hundreds of gallons of diesel each day. It's even harder if you have to mess with DEF. Add in daily maintenance, and downtime can directly threaten your profits.

THE MOST VERSATILE FUEL AND DEF SOLUTIONS FOR JOB SITE SERVICE / Transport diesel in bulk / Protect Tier 4 machinery with ISO compliant DEF systems / Trailers, totes and bulk solutions available

SCHEDULE YOUR DEMO | ThunderCreek.com

All-In-One Jobsite Service Solutions 800.744.0453 | ThunderCreek.com | ®

Page 34 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

USDOT Awards $3M for Highway-Related Job Training Funds to Provide Job Training for Transportation-Related Careers in Eight States

U.S. Transportation Secretary Anthony Foxx announced $3 million in job training grants in eight states. The “Ladders of Opportunity Initiative On-The-Job Training/Supportive Service (OJT/SS)” grants are part of an ongoing federal effort, which includes stakeholder outreach and the creation of the Federal Highway Administration’s Center for Transportation Workforce Development, to improve the apprenticeships and training opportunities for underrepresented or disadvantaged people seeking careers in transportation, engineering or construction. “Providing individuals with the job training opportunities they need is critical to keeping our highway system up and running,” said Foxx. “Training programs like these create opportunities for workers in the short-term, and ensure that the next generation is ready for the challenges that will face America’s transportation system in the years ahead.” According to USDOT estimates, more than half the current highway construction workforce is over the age of 45 and, with retirement, separation and growth, more than a half-million highway construction jobs are projected over the next decade. The grants focus specifically on supporting innovative, nationally and regionally significant highway construction workforce

development programs that target specific workforce needs across the country and build ladders of opportunity to the middle class for American workers. The Ladders of Opportunity Initiative OJT/SS grants support the training programs of state departments of transportation (DOTs) for highway contractors, apprentices and trainees. The grants encourages strategic partnerships among state DOTs and other organizations or stakeholders involved with workforce development, such as educational institutions, public workforce investment systems, and labor organizations, to support training opportunities for minorities and women in skilled and semiskilled crafts. “On-the-job training along with other strategies reflected in these awards can connect people who need jobs with job opportunities," said Federal Highway Administrator Gregory Nadeau. “By giving people the specialized training our transportation system needs, we can ensure that our transportation system remains safe and efficient for decades to come.” Recipients of these job training grants are: • California Department of Transportation (Caltrans) — $400,000 — Through a partnership between California State University-Los Angeles, the Los

Angeles Trade-Tech Community College, the Metropolitan Transportation Authority, and the Long Beach and Los Angeles Workforce Investment Systems, these funds will help Caltrans provide career/college counseling, and placement support for internships and jobs in highway construction or engineering. • Colorado Department of Transportation (CDOT) — $400,000 — These funds will provide training to hundreds of workers to address a skills gap that directly affects Central 70, the state’s largest highway construction project which, at peak, will require an estimated 4,000 employees. • Florida Department of Transportation (FDOT) — $400,000 — FDOT will use these funds to create a “Preparatory Institute” to provide skills training to unemployed or underemployed workers that will lead to journey-level careers in the highway construction industry and address a workforce need for approximately 5,000 jobs statewide in the next decade. • Missouri Department of Transportation (MoDOT) — $400,000 — These funds will enable MoDOT to address a statewide shortage of carpenters and laborers, by providing academic support, career services and training for CPR/First-Aid, OSHA-10 and other construction skills. • Montana Department of Transportation

(MDOT) — $400,000 — These funds will be used to help MDOT and Blackfeet Community College Workforce Highway Construction Training Project train 45 members of the Blackfeet Reservation in heavy equipment operations and flagging to meet the demand for workers on highway construction projects on the Blackfeet Reservation. • Virginia Department of Transportation (VDOT) — $400,000 — This funding will provide OJT trainees with hands-on and classroom instruction regarding asphalt paving and technologies in Virginia community colleges to address a statewide worker shortage. • Pennsylvania Department of Transportation (PennDOT) — $398,750 — To address a growing workforce shortage, these funds will be used to develop an online platform to improve highway construction worker recruitment and retention among women, minorities and disadvantaged people. • Idaho Transportation Department (IDT) — $198,076 — This funding will provide five weeks of training for heavy equipment operators and other skilled personnel to address identified statewide need. (This story also can be found on Construction Equipment Guide’s website a t www.constructionequipmentguide.com.)

Panama Canal Opens Newly Expanded $5B Locks By Juan Zamorano ASSOCIATED PRESS

PANAMA CITY (AP) Authorities hosted a big bash to inaugurate newly expanded locks that will double the Panama Canal’s capacity in a multibilliondollar bet on a bright economic future despite tough times for international shipping. Nearly two years late due to construction delays and labor strife, the $5.25 billion project formally launched with the transit of a 158-ft. wide (48.2 m), 984-ft. long (300 m), Chinese-owned container ship, one of the modern class of mega-vessels that will now be able to use the canal. With 30,000 people and eight foreign heads of state expected to attend the festivities, officials were bullish. “There is evidence that the

Panama Canal, with this expansion, is an important player not only for regional maritime commerce but worldwide,’’ said Oscar Bazan, the Panama Canal Authority’s executive vice president for planning and commercial development. “The canal is a winning bet. [Clients] will benefit from saving not only time but also money, because the canal is a route that shortens distance.’’ However, the party comes amid a lull in global shipping due to the drop in oil prices, an economic slowdown in China, which is the canal’s second-largest customer, and other factors that have hit the waterway’s traffic and income. While authorities anticipate increasing commerce between Asia and ports on the U.S. East Coast, doubts remain that not all those ports are ready to handle the huge New Panamex-class cargo

ships. Net cargo volume through the canal from the U.S. East Coast toward Asia fell 10.2 percent in 2015, according to official statistics. Meanwhile the Suez Canal in Egypt recently lowered tariffs by up to 65 percent on large container carriers in an attempt to keep its traffic. “It’s important to remember that the canal does not create demand. The canal opens the route. Supply and demand on a world level is what will decide whether the Panama Canal will really bring more volume or not,’’ said Antonio Dominguez, a general manager of global shipping leader Maersk Line, which moves about 14.2 percent of world commerce. “What is certain is that the current canal has maxed out.’’ Maersk was among shipping companies that have reduced passages through the Panama Canal,

although Dominguez said the company is considering a return. Since the canal was handed over from U.S. control at the end of 1999, the waterway has generated about $10 billion in direct income for the Central American nation and is responsible for about 40 percent of its GDP, factoring in related economic activity. Some 35 to 40 vessels transit the waterway each day, and the canal is estimated to handle about 6 percent of world maritime commerce. Panama began the expansion nearly a decade ago. Originally planned to open in late 2014 around the waterway’s centennial, the new locks can accommodate ships that carry up to three times the cargo of those previously able to use the canal. Grupo Unidos por el Canal, the Italian- and Spanish-led consortium that spearheaded construc-

tion, handed the project over June 24, although a series of claims are still pending for presumed cost overruns of more than $3 billion. Paul Bingham, a shipping economist at Boston-based EDR Group, predicted the canal expansion’s global impact will be small. “The proportion of world trade that could plausibly use the Panama Canal is constrained by the geography of the world’s population, resource endowments and production regions,’’ Bingham said. “There is very little a larger canal can influence at the margin to induce shifts in the geography of world trade, even through potential reductions in costs of shipping a variety of commodities to, from and within the Americas.’’ (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 35

HIGH QUALITY USED EQUIPMENT

MA21490

2012 CAT 289C

1838 HRS ...... $56,000 78” BKT, AC, HIGH FLOW XPS

MA22084 MA21715

2012 CAT 308E

2746 HRS ........ $81,000 BKT, LEVELING BLADE, LONG STK

MK003555

2001 CAT 143H 12478 HRS....... $69,000 VHP, SLIP CLUTCH, 60% TIRES

MA22539

2001 CAT 140H

13974 HRS ...... $92,500 VHP, LIFT GROUPP, 50% TIRES

MA21705 MJ003408

MA21464

2006 CAT 242B 3856 HRS.........$15,700 2003 CAT 318C NEW 12-16.5 TIRES, SELF-LEVELING, 1-SPD

Butler ButlerIRON.com I RO N .com

7575 HRS .......... $55,000 AC, THUMB, 42” BKT, 60% A AVE VE U/C

Bill Bauer 701.298.1767

Austin Calavera 701.298.2116

ORDER DIRECT

& SAVE

SALESEVENT TIER 3 750-1800 CFM

STILL AVAILABLE

D90PKU

DF900PH3CU

The D90PKU is a 90 CFM\100 psi single tool portable air compressor powered by a Kubota Tier 4 Final Engine.

The DF900PH3CU is a 900 CFM\150 psi Tier 3 Flex engine portable air compressor powered by Cummins.

$13,999* $78,900* *Price does not include shipping, all units are Exworks Michigan City, Indiana

Orders by September 30, 2016

Orders will be delivered through your Sullivan-Palatek distributor

For more details, call us at 219-874-2497

Discover More

www.sullivan-palatek.com

Page 36 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Custom Made Products Co. Humboldt, IA YOUR SOURCE FOR

SALES AND RENTALS CRAWLER TRUCKS, STUMP CUTTERS AND FORESTRY MULCHERS

Lease To Own

(800) 760-7871 Call Anytime

www.gncmp.com 100+ Scrapers on Hand at 16 Locations FOR SALE OR FOR RENT

Locations: Humboldt, Bayard, De Soto, Iowa Falls, Liscomb, Manchester, Britt, Osceola, Sac City, Woodbine, Readlyn, Chariton, Fremont, Newton, Wayne, NE & La Plata, MO

We Will Not Be Undersold!

elivery! Free Dst areas *to mo

18 yd Ashland I-180 TS2s (New & Used) Call

13 yd Ashland I-130 XL2s (New & Used) Call

GRADERS

HOLCOMB

Art’s-Way Graders, (New & Used) ................................................Call Johnson Graders (New & Used)....................................................Call 8’-16’ With & Without Rear Steer

8 yd to 18 yd, (Dolly Wheel or Direct Mount - New & Used) ........Call

ASHLAND 18yd Ashland I-180 TS2s, (New & Used) ....................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call 15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call 13yd Ashland I-130 TS2s, (New & Used) ....................................Call 13yd Ashland I-130 XL2s, (New & Used) ....................................Call 11yd Ashland I-110 TS2s, (New & Used) ....................................Call 11yd Ashland I-110 XL2s, (New & Used) ....................................Call 9 1/2yd Ashland I-950s, (New & Used) ........................................Call Ashland Groundhog GH2500, (New & Used) ................................Call

GARFIELD 12yd Garfield Model 1150s, (Used)..............................................Call 13yd Garfield 1350s, (New & Used) ............................................Call 8yd Garfield Model 850s, (New & Used)......................................Call 5yd Garfield Model 550s, (New & Used)......................................Call

BIG DOG 8 yd Big Dogs, (New & Used) ......................................................Call 6 1/2 yd Big Dogs, (New & Used) ................................................Call 5 yd Big Dogs, (New & Used) ......................................................Call 12’ Feedlot Box Scrapers..............................................................Call 10’ Feedlot Box Scrapers..............................................................Call 12’ Box Scrapers ..........................................................................Call 10’ Box Scrapers ..........................................................................Call 8’ Box Scrapers ............................................................................Call

IRONWOLF 8-12 yd ..........................................................................................Call

LEON 10-13 1/2 yd ..................................................................................Call

ROWSE 7 yd Rowse Model 7002 & 7004 ..................................................Call 5 yd Rowse Model 7002 & 7004 ..................................................Call 3 yd Rowse Model 3002................................................................Call

MISCELLANEOUS 1 1/2 yd, 3 yd & 4yd Durabilts, (New & Used) ............................Call 3/4 yd G&A Mini Scraper, (New & Used)......................................Call

Grove Offers Online Support, Access to Load Charts, Info ABER from page 26

800.392.2686

two 5,500-lb. sections for a combined 11,000- lb. weight or an optional “Heavy Lift” package, which provides a total of 16,500 lbs. counterweight’ • Standard graphics display with a load moment indicator and anti-two block system provides audio-visual warning and a control lever lockout with an electronic display to monitor boom position and load status; and • Powered by a Cummins QSM 402, 10.8 L diesel (Off Highway EPA Certified) six cylinders, after cooled 300 kW (402 bhp) at 1800 rpm. In addition, Grove offers online support with access to load charts and additional technical information. For Jerry Aber, purchasing the Grove TMS 700E 60-ton hydraulic crane was an easy choice. Grove cranes maintain their value so the difference in price between a new crane and one that is eight or nine years old is small. Purchasing new would mean owning a crane that is Tier IV compliant and Aber was confident that at this point, DPF is a proven technology. It also meant that the

company would be taking on a crane with no hours and miles and therefore would be free of any potential maintenance issues that come with purchasing a used crane. For the company’s first new crane purchase, Aber found that Cleveland Crane & Shovel, along with Grove, provided excellent service throughout the entire process. The company was able to use Manitowoc & Grove financing and the delivery and training went smoothly. “The new Grove TMS 700E 60-ton hydraulic crane is already making a valuable contribution to the company and our customers,” said Jerry Aber. Aber’s took delivery of the crane on a Saturday and put it to work on a job the following Monday. Aaron Aber said that with the company’s current fleet, his company is well positioned for growth and they are only limited by a current need for more quality operators and service technicians. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 37

HARD WORKING MACHINES

NEED HARD WORKING PARTS

Scan to sign up and receive promotions and product news!

Page 38 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Ditch Witch Mid-States Hosts Hospitality House Event

itch Witch Mid-States hosted a hospitality house event for the Memorial Tournament held at Muirfield Village Golf Course near Columbus, Ohio, for the second round of play on June 3. Ditch Witch Mid-States customers, employees and Ditch Witch factory representatives at the hospitality house, located on the seventh fairway, were treated to a continental breakfast, buffet lunch, hors d’oeuvres and refreshments before heading out to the course to watch their favorite players in action. Matt Di Iorio, owner of Ditch Witch Mid-States, said that the popular event provided an opportunity for the dealership’s representatives to enjoy time with their customers in a relaxed environment while taking in one of golf’s premier events of the season. Played at the Jack Nicklaus designed course at Muirfield Village Golf Club, the 2016 Memorial Tournament marked the 41st year for the event. As one of the largest annual non-major PGA events, the tournament is one of only five invitational events on the PGA Tour. This year, William McGirt took top honors as the 2016 Memorial tournament champion. Ditch Witch Mid-States operates four full-service locations serving Ohio, Kentucky, western Pennsylvania and western New York. The dealership sells equipment and parts, and provides rentals and service supporting the full line of Ditch Witch machines along with Hammerhead equipment and Terex compact equipment. (L-R): Adam Hill sits with Matt Upp of (This story also can be found on Construction Equipment Precision Pipeline, along with friends Mike Guide’s website at www.constructionequipmentguide.com.) Platte and Mike Frawley, and Sam Swartz of CEG

Ditch Witch Mid-States.

Andrew (L) and Damian Asseyo enjoy the tournament activities at the hospitality house. (L-R): Billy Lenberger, Andrew Lazzaro, Brian Wills and Elliott Carter, all of Ditch Witch Mid-States, work to ensure their guests are enjoying their time.

Susan Madewell joins her fiancé, Jim Pape, Ditch Witch Mid-States, at the Memorial Tournament.

(L-R): Brian Arter, Paul Erb and Dan Hershberger, all of Wenger Pipeline, enjoy watching the pros as they walk past along the 7th fairway.

(L-R): Dennis Wierzbicki, president of Ditch Witch Equipment, joins Tania and Matt Di lorio, Ditch Witch Mid-States, for the event.

Mike Wilson (L) of Vectren talks with Jim Wilson of Miller Pipeline back at the hospitality house after walking the links.

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ July 2, 2016 â€˘ Page 39

www.macallistermachineryused.com

(317) 860-3311 Indianapolis, IN

Zach Pritchett Matt Blosser zachpritchett@ macallister.com

mattblosser@ macallister.com

John Toste

Bobby Saint

johntoste@ macallister.com

bobbysaint@ macallister.com

Used Parts & Attachments

BACKHOE LOADERS Deere 310SE, 1998, 9043 hrs, 3ZU VKLIW WUDQV [ w ENW H[W KRH WLUHV ...... $23,900 Deere 310SE, 1999, 5948 hrs, [ SZU VKLIW WUDQV DX[ K\G H[W KRH w ENW ......... $26,000 Deere 410E, 2000, 10050 hrs, [ ULGH FQWUO DX[ K\GU w ENW H[W KRH ............... $22,900 Deere 410G, 2001, 3758 hrs, Turbo, 4x4 pwr shift trans, aux hyd, ext. hoe, bkt ....... $34,900 Deere 410G, 2002, 5284 hrs, 7XUER [ SZU VKLIW WUDQV TFN FSOU w ENWV ............ $36,900 Deere 410G, 2005, 4622 hrs, AC, pilot cntrls, ext hoe, 4x4 pwr shift trans, qwk cplr ... $37,500 Deere 410G, 2006, 4448 hrs, $& SLORW FQWUOV H[W KRH [ SZU VKLIW WUDQV w ENW .... $37,900 Deere 410G, 2006, 6040 hrs, AC, turbo 2wd pwr shift trans, aux hyd .................. $25,000 Deere 410K, 2014, 371 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext dipper............. $98,900 Deere 410K, 2015, 372 hrs, AC, pilot cntrls, 4x4 pwr shift trans, ext. dipper ..........$114,000 Case 590, 1993, 2880 hrs, $& /YU 7XUER [ SZU VKLIW H[W GLSSHU w ENW .......... $24,500 Case 590SL, 1997, 5615 hrs, &DE Z R $& [ ([W GLSSHU w EXFNHW ................. $17,000

CRAWLER DOZERS/LOADERS Deere 455G, 1999, 3939 hrs, ROPS, loader bucket ................................... $17,500 Deere 550G, 1994, 17775 hrs, 5236 3HGDO 6WHHU :LGH 7UDFN w 3DGV ........... $17,500 Cat D6M XL, 2000, 7001 hrs 5236 H[WUD ORQJ WUDFN w SDGV ........................ $54,000 Cat D7H, 1990, 30593 hrs /YU 6WHHU /QJ 7UFN &RYWU 7UDQV w SDGV 6HPL-U Bld ..... $45,000

EXCAVATORS

Looking for Attachments? Give us a call!

Deere 160D LC, 2008, 4832 hrs AC, cntrl pattern select; long arm, wide pads ...... $79,500 Deere 200C LC, 2005, 10166 hrs AC, lng arm; std boom; lng trck, aux hyd, cplr ... $57,500 Deere 290G LC, 2011, 2380 hrs $& FSOU DX[ K\U w ENWV ................. $179,500 ... $115,000 Deere 350D LC, 2009, 6753 hrs Deere 450DLC, 2007, 7680 hrs AC, med. arm, std boom, wide pads, bkt............ $95,000 Hitachi ZX85USB-3, 2011, 2201 hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w ENW . $79,500 Hitachi ZX210, 2013, 1020 hrs, $& ORQJ DUP DX[ K\G FSOU w ENW .............. $172,000 Cat 312E, 2015, 964 hrs AC, cntrl pattern select, med-ORQJ DUP VWG ERRP w ENW ..... $99,500 ... $104,000 Cat 324D, 2007, Hitachi ZX370, 2005, 12222hrs, $& FQWUO SDWWHUQ VHOHFW ORQJ DUP w w ENWV .. $64,900 Hitachi ZX500, 2002, 13474hrs, Med-ORQJ DUP VWG ERRP ZLGH SDGV w ENW ...... $39,500

SKID STEERS Deere 326E, 2014, 108 hrs, AC, EH cntrls, joystick, 2 sp, self-leveling aux hyd ....... $34,900 Deere 328D, 2012, 631 hrs, AC, EH cntrls, air ride seat, 2 sp, self-leveling, ........... $35,000 Deere 318D, 2011, 317 hrs, Cab, EH, 2sp, Qtach, BA, bucket ........................ $26,900 Case TV380, 2013, 318 hrs, AC, hand cntrls, EH cntrls, air ride seat 2 sp, wide trck... $45,000

WHEEL LOADERS 308D 24â€? Bucket Multiple Available

980G/H/K 7-8 Yd GP Buckets 3 Available

A sample of our available inventory Call/Email for pricing and pictures. Much more available! 320 & 323 buckets 24â€? 42â€? 48â€? 54â€? 420 backhoe rear buckets 12â€? 18â€? 24â€? 36â€? 420 front bucket and forks available 950-972 Fusion coupler bucket and forks 315/316 72â€™ ditch cleaning bucket â€“ New D8T Multi-shank ripper 2 available Various excavator couplers/thumbs/buckets 725, 730, 730, 740 tailgates D6N multi-shank ripper 3 available

We purchase and trade attachments

2014 JD 544Ks - 5 in stock, 400-1100 hours, starting @ $139,000 2015 JD 544Ks - 7 in stock, 300-500 hours, starting @ $147,000 (AC, Coupler, 3 yd bkts, some avail. w/3rd valve & Hi Lifts, municipal owned) Deere 444J, 2006, 7148 hrs, AC, qk cplr, front diff lock, 20.5 tires, gen purp bkt ...... $65,000 Deere 524K, 2013, 1593 hrs, AC, 3 spool; qk cplr, ride cntrl, high lift ............... $129,500 Deere 544J, 2005, 5040 hrs, ride cntrl, dual diff locks, 20.5 tires gen purp bkt ....... $76,000 Deere 644K, 2013, 781 hrs, AC, joy stick steer, aux hyd qck cplr, high lift boom .... $224,500 Volvo L35G, 2013, 1671 hrs, AC, 3 spool, aux hyd, qck cplr, gen purp bkt ........... $59,900

Contact John Reinen (used equipment manager) at 608-220-1723 or Lewis at 608-837-5141 ext.1019

For Photos & Detail Descriptions visit: www.brookstractor.com Six Locations in Wisconsin to serve you - Sun Prairie z Milwaukee De Pere z West Salem z Plover z Mt. Pleasant (coming 2017)

Page 40 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Hydraulic Attachments for Cutting or Grinding and Digging. Applications:

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

• • • • • •

Demolition, Refurbishment Trenching Tunneling Underwater Works Pile Head Cutting Permafrost, Frozen Stockpiles

Products: • • • •

Transverse Drum Cutters Revolving Drum Cutters Longitudinal Drum Cutters Cold Milling Machines Asphalt Removal

Cutting Concrete Slabs

Digging Trenches

Tunnel Excavation

INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

1 (480) 983-2235 www.drumcutters.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 41

“Is your stick too short?” Add 6’-30’ of length to your reach with Add-A-Stick. Overall length determined by excavator weight class. Add 4’-12’ to your reach with Add-A-Boot. Overall length also determined by your excavator weight class. Call: 888-504-1679 www.add-a-stick.com Email: sales@bdfabricators.com Add-A-Stick and Add-A-Boot are members of the

fabricators family.

Scan to sign up and receive promotions and product news!

Page 42 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

LeTourneau Super C Tournapull w/Carryall Scraper, 1:50 Scale - $80

Caterpillar 330D L Excavator, 1:50 Scale - $110

Allis Chalmers HD 21 Dozer, 1:50 Scale - $100

Caterpillar 365C L Front Shovel, 1:50 Scale - $100

Volvo A40G Articulated Hauler, 1:50 Scale - $120

Caterpillar 5110B Excavator, 1:50 Scale - $110

John Deere 470G LC Excavator, 1:50 Scale - $85

Caterpillar M316D Wheel Excavator, 1:50 Scale - $60

Volvo L35G Wheel Loader, 1:50 Scale - $120

Volvo L350F Wheel Loader, 1:50 Scale - $145

Komatsu D275AX-5 Dozer, 1:50 Scale - $120

Caterpillar CT660 Red Cab Dump Truck, 1:50 Scale - $90

Caterpillar D6K XL Track-Type Tractor, 1:50 Scale - $65

Case CX250C Excavator, 1:50 Scale - $175

Grove TM1500 Crane, 1:50 Scale - $150

Volvo L90G Wheel Loader, 1:50 Scale - $115

Shipping and Handling Included

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 43

CONSTRUCTION EQUIPMENT for Every Job Etnyre Equipment Setting the standard for performance and reliability

Asphalt Distributors

Call Today! 800-798-5438

Trailers

ChipSpreaders

Serving Ohio, Indiana, Kentucky and Michigan

www.southeasternequip.com

Page 44 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Goals for This Year’s Construction Include Webb Road

KDOT photo

The overall improvements along East Kellogg — more than $300 million and funded by T-WORKS ($162 million), the city of Wichita and the KTA — includes new interchanges at Webb, Greenwich and the Turnpike. WILDCAT from page 1

Interchange, which started in August 2015 and should be completed in late 2019; the second is the Greenwich and I-35 Interchanges, with an estimated cost of $125 million, anticipated bid date this fall and completion in 2021. The Kellogg (U.S. 54) and Webb Project, which stretches from the East Wichita Turnpike access to just short of Greenwich, is widening Kellogg to a six-lane freeway with an interchange at Webb Road, frontage roads, and modified access to the Kansas Turnpike Authority (KTA) at Exit 50. Wildcat’s contract is valued at $79.1 million. The city of Wichita is contributing to the Webb Road project as well as managing it. “The project is nearing the end of the first phase of construction — utility work,” said Gary Janzen, PE, Wichita’s city engineer. “Crews are preparing to connect existing utilities to the new system. Construction of the south road and the east side of Webb Road is starting this summer. Pre-construction work is occurring on the second segment of the project from Greenwich to K-96. Land has been acquired and businesses along Greenwich and from Zelta to 127th Street have moved. “Work has started to relocate utilities and buildings are being torn down to accommodate the relocation,” Janzen said. “Design plans are being finalized and should be available to contractors in late summer with the project letting occurring this fall. The expansion will reduce congestion, increase capacity and improve traffic flow on the city’s east side.” Janzen said that having a local contractor is beneficial. “It provides opportunities for local subcontractors, vendors and suppliers,” he said. The design for the roadwork was prepared

by a team led by Parsons Brinckerhoff. “The Kellogg & Webb Road intersection has historically recorded more accidents than any other intersection in the city. This project continues the six-lane freeway from near the East Turnpike access to just short of Greenwich Road removing the Kellogg traffic from the Webb Road Intersection for improved safety. Upon completion, the KTA and Webb Road traffic will access Kellogg via interchange ramps. Local traffic will utilize frontage roads with available UTurns that travelers have come to expect along the corridor. “Concept development began earlier to

KDOT photo

Cornejo & Sons LLC is handling paving on the project.

Ease of access to both the KTA and Webb Road was vital and it was through this interagency coordination that the final design was realized.” “The improved capacity, functionality and safety along the corridor will serve not only the daily commuters but also support the local business community and spawn future development,” said Ron Nuessen, the design team’s project manager. Mike Armour, the city of Wichita’s special projects engineer, said that “some of the highlights of the project include the curved trapezoidal steel box-girder bridge. The city of Wichita has used steel box-girder bridges

“The Kellogg & Webb Road intersection has historically recorded more accidents than any other intersection in the city.” Gary Janzen City of Wichita

aid in preserving the corridor for the freeway with final design beginning in 2008 by Parsons Brinckerhoff to increase capacity and improve functionality. Kellogg traffic was a major consideration in the design with a current Average Annual Daily Traffic [AADT] in excess of 34,000 [69,000 total intersection traffic] increasing to more than 115,000 by 2040. Upon completion, commuters will experience memorable aesthetic elements incorporated into the design as well as improved travel times through the corridor. “One of the many challenges of the project was in the coordination of the numerous stakeholders and meeting all expectations with relation to functionality and access.

on several of its interchanges in the past with good success. Another interesting element are the retaining walls, including the soldierpile walls with cast-in-place panels, which will incorporate artistic elements developed by the artist. The 3D relief on the panels will give motorists the feel of a Kansas prairie. The corners of the grade-separated intersection at Webb Road will be the focal points of the landscaping, including rain gardens that have been designed with hardy, native plants and are connected to the stormwater system. “Utility relocation is typically completed by the respective utility companies prior to the start of roadway construction,” he added. “However, due to the vital use of Kellogg for cross-city travel, it was decided to incorpo-

rate most of the utility work into the first phase of construction so that the impact to traffic could be managed and mitigated. Overseeing the utility relocation efforts also allowed the contractor to ensure that the new utility routes would indeed be free from conflict of the proposed roadway improvements.” With major work now in progress, two lanes of traffic will be kept open in each direction, but left turns are now prohibited except for EB Kellogg, which is a heavy movement for employees of the local aircraft industry. To help protect the workers in the construction zone, the speed limit on Kellogg has been reduced to 40 mph and 30 mph on Webb for the remainder of the project. Wildcat Construction spent nearly the first year of the project dealing with utility relocations. “We are getting a jump on the schedule now,” said Alan Farrington, vice president of Wildcat. “Most of the utility companies have to relocate into facilities that we installed and they had until August 1 per-specification, however the cut-overs are now complete and we should be able to gain a few months of construction time on the project. “We had to install a whole new underground duct bank systems for AT&T and Westar Energy,” Farrington said. “Westar is taking down all their overhead power lines and putting them into ducts and AT&T removed some of their ducts that were in conflict with the new construction and excavation of the new system.” The goals for this year’s construction season are to construct the south frontage road and east half of Webb Road, which is being widened by nearly 50 ft. (15 m) to the east of the existing curb lines. This will allow see WILDCAT page 58

Paving

SECTION

Pages 45-55

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Dynapac F1200C Compact Tracked Paver Offers Flexibility Atlas Copco’s compact Dynapac F1200C asphalt paver excels on a wide range of paving projects — from cycle paths, sidewalks, repair work, parking garages and sports fields — due to its high flexibility. The F1200C offers road construction contractors this flexibility with interchangeable working widths ranging from 4 to 10 ft. (1.2 to 3 m), high material filling capacity and a high paving capacity of 330 tons (299 t) per hour. The paver’s V-screed ensures excellent paving results with superior compaction and high quality asphalt mat, according to the manufacturer. The F1200C includes multiple features that maximize mat quality. Its Dynapac feed control system, for instance, eliminates material segregation and ensures continuous, uniform material flow through the paver with its four ultrasonic sensors and thin center chain box augers. The four sensors optimize both the auger and conveyor speed by measuring the material height and detecting gaps in the material. The conveyor’s 6-in. (15 cm) wide chain box ensures continuous, uniform material flow to the center of the screed. The paver’s center line drive auger includes 13-in. (33 cm) diameter flights to eliminate centerline segregation by providing optimal material flow. Its divided conveyor with its single drive system makes it possible to guide the material to either the left or right side of the screed for asymmetrical paving. Operators can easily pave close to walls with optional reduction shoes. Customers can choose between a vibration or a tamper & vibration screed that are either electrically or gas heated for precise, easy operation. The gas-heated screed reduces costs, accelerates heat-up time and features a gas bottle holder making it easier to change the small bottles from the side for easy transport. The electric-heated screed offers contractors a quick setup since it heats quickly due to its high capacity generator. Operators can set the screed’s required temperature using the dashboard’s keypad. The temperature control minimizes energy waste and helps the

screed achieve optimal temperature. Atlas Copco designed the F1200C to achieve optimum pre-compaction and has included hydraulic motors for the tamper and vibration in the basic and hydraulic extendable screed sections. The unit’s paving width ranges from 4 to 8 ft. (1.2 to 2.4 m), and with screed extensions, it can achieve a 10-ft. paving width and pave up to 10 in. (25.4

Atlas Copco’s compact Dynapac F1200C asphalt paver has a laying capacity of 330 tons (299 t) per hour.

cm) thick. The F1200C is less than 15 ft. (4.5 m) long and about 7 ft. (2 m) wide, making it easy for paving in narrow areas. It also can operate in areas with minimal overhead clearance, such as parking ramps, since it is less than 7 ft. tall. To maximize time between refilling, Atlas Copco incorporated a 5.5-ton (5 t) hopper into the paver. This helps increase operator productivity, especially while working in cramped worksites where refilling can be challenging. Operators can raise the hopper for tight working areas, yet still buffer a significant amount of material. Every Atlas Copco paver includes ergonomic features to

enhance operator comfort and increase productivity. The F1200C features a backrest that includes a storage compartment. The stand floor is attached with a fixed connection to the tractor and has a non-slip profile for maximum safety and comfort. Operators improve visibility around the machine by extending slideable step extensions in the floor of the operator platform. This allows operators the confidence to see around the paver increasing safety. Atlas Copco arranged the paver’s toggle switches according to function group and operational frequency, so operators can focus on paving and their surroundings. With simple control navigation, operators can ensure they drive in a straight line and improve safety on site. For example, regularly used functions, such as hopper, screed and joystick controls, are close to the driver for easy access. The F1200C offers operators stability, flexibility and fast transport speed with long tracks and powerful hydraulic motors. The paver’s hydraulics ensures that the power of the engine transmits through the tracks and directly to the ground, giving high traction force. The 66-hp hydraulic power pack allows operators to easily pave high quality asphalt mats even under difficult paving conditions like uneven surfaces. With its reliable hydraulic system and hydraulically driven fan, the F1200C offers outstanding fuel efficiency, reduced maintenance and long service intervals. The arrangement of the adjustable crawler rollers gives the machine an improved center of gravity and allow operators a comfortable ride, according to the manufacturer. Atlas Copco builds every paver with high-end components and high wear-resistant parts to give the machine a long service life. Its large side doors gives technicians easy access to components and to complete maintenance. Also, its Tier IV Final engine features a unique layout for easy access to all components to minimize servicing downtime. For more information, call 800/732-6762 or visit www.atlascopco.us. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Page 46 • July 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Serving the Asphalt Industry for 25 Years 2007 Rosco Maximizer 3 distributor, 1950 gal, EZ-3S computers, 8-16 ft extending spray bar, dsl heat, Freightliner w/Cat C7 dsl eng w/new longblock, auto trans

2008 Geffs BM624 extendable chip spreader, 10-16 ft, 2006 Blaw Knox PF 5510 track paver, Omni IIIE 10-18 Cat C7 diesel, power shift transmission, 4 wheel drive, ½ ft electric heated screed, Cummins dsl eng, Ultra 3 computerized auger sensors, power auger tunnels

Sakai Rolls Out Compactors 1999 Ingersoll Rand PT125R pneumatic roller, 9 wheel rubber tire, J.D. diesel eng, water system, hydrostatic drive

2005 Broce CR350 broom, a/c, 8 ft broom, Cat diesel engine, water system, blade on front

2010 Cat AP1055D track paver, Carlson EZIV 10- 19 ft electric heated screed, Cat C7 diesel, self lubing system, power auger tunnels

2005 Etnyre Centennial II distributor, 2000 gallons, computer w/1 ft cut-offs, 16 ft spray bar, dsl heat, Ford F750XL w/Cat C7 dsl eng, 6 spd, 2 spd

2008 Cat AP1000D paver, AS2302 screed 10-18 ft 2009 Hamm HD120HV double drum 78” high frequen- w/electric heat, Cat C7 diesel, self lubing system, front cy vibratory roller, J.D. diesel, water system wheel assist (2010 year model also available)

3517 Wayne White Rd., Climax, NC 27233

Asphalt paving of moderate-sized jobs right up to the curb is now easier than ever with Sakai America’s EPA Tier IV Final update of its 300 and 502 series rollers. Sakai introduced its new tandem-drum SW354 and combination-type TW354 vibratory rollers at World of Asphalt 2016 March 22 through 24 in Nashville. The Sakai SW354 and TW354 offer greater operational flexibility, ease of use and commonality of parts. Unlike other emissions compliance solutions, none of the new units requires diesel particulate filters (DPF) or regen for their 24 hp Kubota-Clean Diesel Solution engines. Sakai’s ECO compaction mode reduces fuel consumption by up to 35 percent while maintaining consistent compaction performance, according to the manufacturer. Dynamic linear pressure of the 354series’ 47-in. (119 cm) wide, 27-in. (68.5 cm) diameter drums is rated at 205 lb./in. Other compaction performance factors include centrifugal force of 6,530 lb., amplitude of 0.012 in. (.03 cm), and vibratory frequency of 4,000 vpm. Sakai will introduce the TW504 later this summer. Dynamic linear pressure of the TW504 roller’s 51-in. (129.5 cm) wide, 31-

in. (78.7 cm) diameter steel drum is 202 lb./in. without roll-over-protection-system (ROPS) option, 236 lb./in. with combined machine static weight and installed ROPS. The TW504 also features high-low amplitude selection from a variable eccentric shaft for use in wider applications. Centrifugal force on low amplitude is rated at 5,955 lb. and on high is rated at 7,710 lb. Amplitude is 0.012 and 0.016, and frequency 3,100 vpm and 4,000 vpm, respectively. Theoretical gradeability of all three models is 38 percent, or 21 degrees of incline. Ease of Service The new 354- and 504-series rollers are easy to maintain, featuring a best-in-class sprinkler system with anti-clog package, triple-protection filtration and a plastic water tank with optimum drain characteristics that make for hassle-free winterization. Oil bath lubrication provides low-maintenance yet highly effective drum vibrator protection, according to the manufacturer. For more information, visit www.sakaiamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 2, 2016 • Page 47

Page 48 • July 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Shuttle Buggy MTV Design Ensures Continuous Paving on Road Projects The Roadtec SB-2500e Shuttle Buggy MTV (material transfer vehicle) can store and transfer hot-mixed asphalt material from a truck to a paver for continuous paving. Designed to “shuttle” between the asphalt haul truck and paver, the machine features an anti-segregation triple-pitch auger that remixes materials just before they are delivered to the asphalt paver at rates of up to 600 tons (544 t) per hour. The 25-ton (22.6 t) surge capacity of the SB-2500e/ex is sufficient capacity to allow trucks to fully unload material and immediately return to the asphalt plant. The triple-pitch auger flighting design used in the Roadtec Shuttle Buggy is designed to provide uniform remixing across the width of the entire hopper. The triple-pitch auger located in the bottom of the hopper remixes the contents of the storage hopper. The mixing action is designed to equalize temperatures and evenly mixes large and small particles. A slat conveyor runs from the bottom of the hopper and feeds the discharge conveyor. The machine’s front hopper features a steep slope and vibrating bottom plate in the hopper, which is designed to prevent material build-up. Heavy-duty, swiveling support casters under the hopper are said to assure smooth movement. Operators can adjust the hopper position from either of two separate control boxes. They can also adjust the position of the push roller for different truck designs. An optional windrow pickup head is available. The SB-2500e is powered by a 300 hp Tier IV, diesel

Designed to “shuttle” between the asphalt haul truck and paver, the machine features an anti-segregation triple-pitch auger that remixes materials just before they are delivered to the asphalt paver at rates of up to 600 tons (544 t) per hour.

Cummins QSL 9 engine. The Shuttle Buggy MTV rides on four 21-in. wide by 25-in. (53 by 63.5 cm) high flotation tires. The steering wheel controls the front wheels of the allwheel drive machines. The hydrostatic drive mechanism offers two speed ranges (working and travel) with continuously variable speed. For more information, visit www.roadtec.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Chicago Pneumatic Expands Its Forward Plate Compactor Lineup Contractors and rental companies now have another option for compaction of thin asphalt layers, small repairs, and road maintenance work. The MV 58A forward asphalt plate compactor is the newest compaction machine from Chicago Pneumatic Construction Equipment (CP). At only 150 lbs. (68 kg), the MV 58A is lightweight, powerful and robust. An integrated, tubeless water distribution system prevents asphalt from sticking to the plate. The machine also leaves zero tread on the asphalt. Additionally, this system eliminates regular plate and pipe cleaning to save operators time. Similar to all CP forward compaction plates, the MV 58A has a durable frame to protect crucial components. One of those components includes a 3-hp Honda engine.

A corrosion-free one-gallon water tank features an easy-to-reach flow adjustment valve. To support fast refills, the tank also is easy and quick to remove, according to the manufacturer. “This product has been specifically designed to meet demand from rental companies and contractors,” said Darrell Engle, product manager, light compaction at CP. “It is an ideal

compactor for thin asphalt and small repairs on roads since the plate compactor is lightweight, fast, maneuverable and has a maintenancefree design.” Tr a n s p o r t a t i o n between job sites also has been engineered to be fast and simple. The MV 58A features a compact design and is equipped with an additional option of transport wheels. For more information, visit www.cp.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

The MV 58A forward asphalt plate compactor is the newest compaction machine from Chicago Pneumatic Construction Equipment.

ROLAND MACHINERY Springfield, IL 217/789-7711 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Portage, IN 219/764-8080 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Eau Claire, WI 715/874-5400 DePere, WI 920/532-0165 Deforest, WI 608/842-4151 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 2600 S. Lincoln Rd. Escanaba, MI 906/786-6920 Fax: 906/786-5813

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 17000 Highway 41 N Evansville, IN 47725 812/425-4491 7310 Venture Lane Fort Wayne, IN 46818 260/489-4551 8410 Zionsville Road Indianapolis, IN 46268-1524 317/872-8410 1801 Watterson Trail Louisville, KY 40299 502/491-4000 1484 American Greeting Card Road Corbin, KY 40701-4813 606/528-3700 1389 Cahill Drive Lexington, KY 40504-1167 859/259-3456 160 County Park Road Paducah, KY 42001 270/444-8390

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 2, 2016 • Page 49

CASEY EQUIPMENT COMPANY www.casey-equipment.com 1603 East Algonquin Rd. Arlington Heights, IL 60005 847/437-8686 Fax: 847/437-8738 16754 New Ave. Lemont, IL 60439 630/257-1261 Fax: 630/257-0614 1548 Huntwood Drive Cherry Valley, IL 61016 815/332-8222 Fax: 815/332-3056

The Best Tilt Hopper Paver Just J Got Better

Introducing the 1000G

RMS RENTALS 12520 Quentin Ave S. Suite 100 Savage, MN 55378 952/895-9595 800/888-9515

ROAD MACHINERY & SUPPLIES CO. 5633 W Hwy 13 Savage, MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia, MN 218/741-9011 800/752-4304 Negaunee, MI 906/475-6488 800/888-9565 Sioux City, IA 217/252-0538 800/633-9104 Des Moines, IA 515/282-0404 800/555-1445 Cedar Rapids, IA 319/363-9655 800/616-6615 East Peoria, IL 309/694-3764 Milan, IL 309/787-1742 800/633-9114

g 8 - 13 ft LeeBoy Legend Screed System LeeBoy’s Under Auger Cut Off Gates 9” Steel Alloy Segmented Cast Augers Low Deck Configuration Hydrostatic Propulsion Controls Dual Control Stations Steel Track Drive with Automatic Adjustment

www. VT LeeBoy y,, Inc.

500 50 Lincoln County Pkwy Ext., Lincolnton, NC 28092

. com Call Ca all 704.966.3300

www ww ww w.LeeBoy .LeeBoy y.com

Page 50 • July 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

DePere, WI 920/532-0165

Schofield, WI 715/355-9898

Springfield, IL 217/789-7711

Bridgeton, MO 314/291-1330

Palmyra, MO 573/769-2056

Deforest, WI 608/842-4151

Eau Clair, WI 715/874-5400

Carterville, IL 618/985-3399

Cape Girardeau, MO 573/334-5252

Portage, IN 219/764-8080

Franksville, WI 262/835-2710

Escanaba, MI 906/786-6920

East Peoria, IL 309/694-3764

Columbia, MO 573/814-0083

3024 – 4th Street, S.E. Minneapolis, MN 55414 612-378-9558

100 Sheridan Ave. Des Moines, IA 50313 515/282-0404 • 800/555-1445

1400 North Hwy 75 Sioux City, IA 51105 712/252-0538 • 800/633-9104

2525 16th Ave SW Cedar Rapids, IA 52406 319/363-9655 • 800/616-6615

606 W. 10th Ave. Milan, IL 61264 309/787-1742 • 800/633-9114

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 2, 2016 • Page 51

Our rollers are pretty basic. Basically perfect. BOMAG improves on perfection with the BW120AD-4 roller. Want a roller that will finish the job better, faster and more efficiently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG. To do the best job, you need the best equipment. To learn more visit www.bomag-americas.com, or call 1-800-78-BOMAG today.

THE COMPACTION EXPERTS

W250 N6851 Hwy 164 Sussex, WI 53089 262/246-5700 262/246-5719 Fax DeForest, WI 608/222-9191

Eau Claire, WI 715/832-3443 De Pere, WI 920/338-5800 Marathon, WI 715/443-6600 Negaunee, MI 906/475-4181

10874 East Pike Rd. Cambridge, OH 43725 740-432-6303 www.southeasternequip. com Evansville, IN 47715 812-476-7321 Fort Wayne, IN 46808 260-483-8868 Indianapolis, IN 46268 317-872-4877

Burlington, KY 41005 859-586-6133 Holt, MI 48842 517-694-0471 Novi, MI 48374 248-349-9922 Brilliant, OH 43913 740-598-3400 Brunswick, OH 44212 330-225-6511

Dublin, OH 43016 614-889-1073 Gallipolis, OH 45631 740-446-3910 Heath, OH 43056 740-522-3500 Mansfield, OH 44903 419-529-4848 Marietta, OH 45750 740-374-7479

Mentor, OH 44060 440-255-6300 Monroe, OH 45050 513-539-9214 North Canton, OH 44720 330-494-3950 Perrysburg, OH 43551 419-874-0331 Troy, OH 45373 937-416-6397

1400 W. Ogden Ave. Naperville, IL 60563 630/355-7150 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Rockdale, IL 815/730-9011

Page 52 • July 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Introducing the GP3, the World’s Most Intelligent Paver Announcing Our New Distributor in Arizona

info@gomaco.com ❘ www.gomaco.com CONCRETE STREETS AND HIGHWAYS ❘ AIRPORT RUNWAYS ❘ CURB AND GUTTER ❘ SIDEWALKS RECREATIONAL TRAILS ❘ SAFETY BARRIER ❘ BRIDGE PARAPET ❘ BRIDGE DECKS ❘ IRRIGATION CANALS GOMACO CORPORATION IN IDA GROVE, IOWA, USA ❘ 712-364-3347

ROAD MACHINERY & SUPPLIES CO.

SWANSTON EQUIPMENT COMPANY

Des Moines, IA 515/282-0404 • 800/555-1445 Sioux City, IA 712/252-0538 • 800/633-9104 Cedar Rapids, IA 319/363-9655 • 800/616-6615 Milan, IL 309/787-1742 • 800/633-9114

3450 West Main Fargo, ND 58103 800/369-0371 3915 Burdick Expressway E. Minot, ND 58703 800/210-8766

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 2, 2016 • Page 53

INTELLIGENT COMPACTION

The Hamm H11i compactor comes standard with the “Hammtronic” machine management system for the monitoring of all engine and vehicle functions. Automatically adjusting traction control drive, vibration and engine speed to the operating conditions as well as reducing fuel consumption, exhaust gas and noise emissions significantly. Increase your productivity, work more economically, save fuel and extend the life or your machine – that’s the reward of Hammtronic. Hamm H-Series – the compactor of the future!

ROAD AND MINERAL TECHNOLOGIES

www.wirtgenamerica.com

ROLAND MACHINERY DePere WI 920/532-0165 Deforest WI 608/842-4151 Franksville WI 262/835-2710 Schofield WI 715/355-9898

Eau Claire, WI 715/874-5400 Escanaba MI 906/786-6920 Springfield, IL 217/789-7711 Marengo, IL 815/923-4966

Bolingbrook IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Bridgeton, MO 314/291-1330

Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 Portage, IN 219/764-8080

BRANDEIS MACHINERY & SUPPLY COMPANY 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 • Fax: 502/499-3195 www.brandeismachinery.com Evansville, IN 812/425-4491 • Fax 812/425-1171 Corbin, KY 606/528-3700 • Fax 606/528-9014 Lexington, KY 859/259-3456 • Fax 859/254-0783

Stanville, KY 606/478-9201 • Fax 606/478-9208 Paducah, KY 270/444-8390 • Fax 270/575-4907 Indianapolis, IN 317/872-8410 • Fax 317/872-8417 Ft.Wayne, IN 260/489-4551 • Fax 260/489-1620

Page 54 • July 2, 2016 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Construction Equipment Guide â€¢ Paving Section â€¢ www.constructionequipmentguide.com â€¢ July 2, 2016 â€¢ Page 55

Finkbiner Equipment Co. 15 W 400N Frontage Rd. Burr Ridge, IL 60527 630-654-3700 Fax: 630-654-3792 www.finkbinerequipment.com

Highway Equipment Company of Ohio 1405 Timken Place SW Canton, OH 44706 330-915-8391 Fax: 330-915-8411 www.highway-equipment.com

CMW Equipment 8668 Olive Blvd. St. Louis, MO 63132 314-993-1336 Fax: 214-993-1467 www.cmw-equip.com

Contact your local dealer: McAllister Road Machinery & Supplies Co. Equipment Co. Contact your local dealer: Contact your local dealer: 5633 W Hwy 13 12500 S. Cicero Ave. Savage, MN Alsip, IL 60803 708.389.7700 Dealer Dealer Name Name 952.895.9595 800.888.9515 Villa Park, IL Duluth, MN 630.530.7600 218.727.8611 City City,, S SILTT Rockford, 800.888.9535 815.227.0555 123.456.7890 123.456.7890 Virginia, MN East Peoria, IL 218.741.9011 309.694.4455 800.752.4304 City , S T City, ST Springfield, IL Cedar Rapids, IA 123.456.7890 123.456.7890 217.789.0351 319.363.9655 800.616.6615

City, ST

2<F Equipment 123.456.7890 2OLYH %OYG 6W /RXLV 02 City, ST )D[ ZZZ FPZ HTXLS FRP 123.456.7890

Des Moines, IA 515.282.0404 800.555.1445

Youâ€™re serious about getting your bonus. And your crew thanks you.

Sioux City, IA 712.252.0538 800.633.9104

DE DEALER ALER LOGO

Our line of pavers and compactors sets the standard for reliable asphalt paving. W We e have a long history of proven technology and a reputation for industry-leading innovation. When it comes to maximizing your earnings, these machines deliver. See smart in action at volvoce.com/smartroads.

Page 56 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

McAllister Equipment Co. Promotes Allison to Vice President of Sales McAllister Equipment Co. announced the promotion of Park J. Allison to vice president of sales. Based at the company’s headquarters in Alsip, Ill., Allison will be responsible for providing leadership and coordination for McAllister’s sales function. He will develop strategies to deliver profitable growth while creating and maintaining a culture of success. Allison brings more than 24 years of industry experience, including 12 years in various sales positions at McAllister. Over the years he has gained invaluable direct sales experience in both new and used equipment sales. He is very active in industry associations. Allison’s background, education and knowledge fortify him with the skills and knowledge to successfully lead McAllister’s sales team into a bright future. For more information, visit www.mcallisterequipment.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

WEST SIDE TRACTOR SALES CO. www.westside tractorsales.com 1400 W. Ogden Ave. • Napervile, IL 60563 630-355-7150 Fax: 630-355-7173 150 W. 162nd St. Route 6 • South Holland, IL 60473 708-331-6362 Fax: 708-331-7334 3110 Prairie Rd. • Rockford, IL 61102 815-961-3160 Fax: 815-965-1810 1560 N. Old Rand Rd. • Wauconda, IL 60084 847-526-7700 Fax: 847-526-3565 600 Walnut Court • Rockdale, IL 60436 815-730-9011 Fax: 815-730-9036

AIS CONSTRUCTION EQUIPMENT CORPORATION www.aisequip.com 3600 North Grand River Avenue • Lansing, MI 48906 517-321-8000 Fax: 517-321-6275 Grand Rapids 600 44th Street S.W. • Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue • Lenox, MI 48050 586-727-7502 Fax: 586-727-7311

Park J. Allison

ARTBA Honors Anderson, Gee With ‘Jake Landen Highway Safety Award’ For nearly 30 years, members of the American Road & Transportation Builders Association’s (ARTBA) Traffic Safety Industry Division (TSID) have honored public and private sector professionals with the prestigious “Jake Landen Highway Safety Award.” The award, which is named after the 3M executive who served as ARTBA chairman in 1976, is presented annually to those who have “made significant and lasting contributions to the safety of our nation’s highways.” The 2015 private sector award winner is Ennis-Flint Chairman Bryce Anderson, whose more than 50 years in the industry are a testament to his life-long commitment to safety on America’s roadways. Anderson began Anderson Striping in 1967 as a parking lot striping contractor and consistently invested in the industry as a contractor and manufacturer and a volunteer for countless industry events. From that small beginning, Anderson has grown his company, Ennis-Flint, into one of the largest traffic safety and pavement marking companies in the world. The 2015 public sector award winner is King W. Gee, the current director of engineering and technical services for the American Association of State Highway & Transportation Officials (AASHTO).

Prior to joining AASHTO, Gee had a distinguished 35year career with the Federal Highway Administration (FHWA), guiding oversight of major projects including safer and longer-lasting construction methods and materials. Gee has been recognized with the U.S. Presidential Rank Award for Meritorious Service in 2000 and 2008 as well as the U.S. Department of Transportation’s Gold, Silver and Bronze Medals for Exceptional, Meritorious and Superior Achievement. “Bryce Anderson and King Gee both define the virtues of this award, showing professional integrity, dedication, involvement and a pioneering spirit,” said ARTBA Senior Vice President of Safety and TSID Managing Director Brad Sant. “They serve as examples of those who believe in their work to make America’s roads safer.” The awards were presented at the annual TSID “Summer Social” in early June, held in Savannah, Ga. To be eligible for the Landen award, a person must have been employed, or be retired from, a private business or public agency, made a significant contribution to highway safety and be nominated by an ARTBA TSID member. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Saginaw 4600 AIS Drive P.O. Box 253 • Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East • Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit 56555 Pontiac Trail • New Hudson, MI 48165 248-437-8121 800-457-8121

RDO EQUIPMENT CO. www.rdoequipment.com 12500 DuPont Ave. S. • Burnsville, MN 952-890-8880 1910 LorRay Dr. • North Mankato. MN 506-387-1836 1236 60th Ave. N.W. • Rochester, MN 507-282-8888 6700 Highway 10 NW • Sauk Rapids, MN 320-259-6222

hitachiconstruction.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 57

NORTRAX www.nortrax.com 310 Industrial Park Drive • Ashland, WI 54806 715-682-5522 Fax: 715-682-8476 4341 South Prairie View Rd. (Hwy 53 North) Chippewa Falls, WI 54729 715-834-2924 Fax: 715-834-1173 1890 US Hwy 8 • Monico, WI 54501 715-487-5583 Fax: 715-487-5968 1425 O’Keefe Drive • Mosinee, WI 54455 715-693-3820 Fax: 715-693-3825 259 Convenience Lane Southwest • Bemidji, MN 56601 215-759-1996 Fax: 218-759-1790 3401 Arrowhead Rd. • Duluth, MN 55811 218-722-7456 Fax: 218-722-2619 34316 Hwy 2 • Grand Rapids, MN 55744 218-326-9427 Fax: 218-327-1248 1818 North Lincoln Rd. • Escanaba, MI 49829 906-789-9054 Fax: 906-789-0344

BROOKS TRACTOR www.brookstractor.com Sun Prairie 1900 W. Main St. • P.O. Box 9 • Sun Prairie, WI 53590 608-837-5141 Fax: 608-837-4012 Milwaukee 12101 W. Silver Spring Dr. • Milwaukee, WI 53225 414-462-9790 Fax: 414-462-7242 De Pere 1031 Lawrence Dr. • De Pere, WI 54115 920-336-5711 Fax: 920-336-6405 West Salem 451 W. Avenue N. • West Salem, WI 54669 608-786-2644 Fax: 608-786-2206 Plover 5429 Prairie Dr. • Plover, WI 54467 715-254-2777 Fax: 715-254-2799 COMING 2016 Mount Pleasant 1609 SE Frontage Rd. • Mt. Pleasant, WI 53177

RUDD EQUIPMENT COMPANY 4344 Poplar Level Rd • Louisville, KY 40213 502-456-4050 6901 Highway 41 N • Evansville, IN 47725 812-867-6661 5820 Industrial Rd • Fort Wayne, IN 46825 260-482-3681 2655 Kentucky Ave • Indianapolis, IN 46221 317-247-9125 728 W Cumberland Gap PKWY • Corbin, KY 40701 606-528-9440 2114 Highway 1428 E • Prestonsburg, KY 41653 606-874-2104 4679 Baumgartner Rd • St. Louis, MO 63129 314-487-8925 11807 Enterprise Drive • Cincinnati, OH 45241 513-321-7833 2512 Jackson Pike • Columbus, OH 43223 614-636-4050 COMING SOON: Cleveland, OH 216-393-7833

Page 58 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Wildcat Set to Remove Existing Concrete, Asphalt spirit is being mobilized to take Wildcat to switch traffic so that its advantage of the extra two months. Right now there are roughly 30 crews can have access to other construction workers on site, but areas of the project. “When we get the south when peak construction is reached frontage road completed and the in 2018 and 2019, there will likely eastbound lanes shifted to it” said be more than 100 people. The main Farrington, “that will allow the subcontractors are: Dondlinger & existing westbound lanes of Sons Construction for the new Kellogg to be relocated into the old Webb Road bridge, sanitary sewer, eastbound lanes. Then we can con- waterline and a portion of the struct the north frontage road, storm sewer; Cornejo & Sons LLC which once completed, allows us for all paving, concrete and to split the EB and WB to the out- asphalt; Cillessen & Sons Inc. for sides of the mainline and get into traffic control and pavement markthe middle and start the bulk of the ings; Fulsom Brothers Inc. for work. It’s almost two years of lead signing; Atlas Electric LLC for up time to hit the final two years. It electrical and ITS; Phillips Southern Electric for traffic sigjust takes time to get stuff built.” The plan is to work straight nals; and Seeders, Inc. for erosion through the winter if the weather is control and landscaping, not to good. Farrington said that in addi- mention several other subcontraction to dealing with the challenges tors. “The subcontractors will take of working in an urban environ- care of their own crews,” said ment, a substantial number of sol- Farrington, “and we’ll track all of dier pile walls are being installed. the production rates and quantities “It’s similar to what we did in of materials used, and make sure the last couple of projects,” Farrington said. “Those are pretty massive undertakings — you have to basically drill Wildcat Construction Co. Inc. photo in concrete columns with Wildcat Construction spent nearly the first year of the project dealing with utility relocations. steel innards from the existing ground level and start of miscellaneous concrete, motorists, most of the work will be 72 t) crane for wall forming. As a excavating down along the steel and rebar from other carried out during the day. subsidiary of Sherwood face of the concrete structure removals. Waste “We’re required to maintain at Construction Company, the majorcolumns. We then put in the excavation on the project least two lanes in each direction of ity of the equipment Wildcat uses lagging and a back drain syswill generate approximately Kellogg at all times,” said is from Sherwood’s leasing inventem, and then cast the con375,000 cu. yds. (286,708 Farrington. “If we get to an area tory. Locally, Foley Equipment crete face in front of it. The cu m) of earth and shale. where it is going to go down to one Company provides parts, outside concrete faces on this project New materials will include lane, the work has to be done repairs and rentals as needed. are loaded with some fancy 187,000 sq. yds. (17,372 sq between 10 pm and 6 am. We did Farrington has been in construcartwork created via urethane m) of concrete pavement two weeks of night work in April tion for 31 years and he expressed formliners.” with associated bases and to remove some medians and pave his appreciation of the original Phasing is the solution to subgrade treatments; 30,000 them to allow for traffic switches. work on the freeway infrastructure. the limited work space issue linear ft. (9,144 m) of storm There will be scattered night work “For the time that it was conthat the crews are facing. To sewer pipe with more than throughout the duration of the projstructed,” he said, “over 50 years construct the frontage roads 380 inlets and manholes; 1.8 ect.” of growth and expansion in that will be outside the existmillion lbs. (816,466 kg) of Wildcat is part of the Sherwood Wichita taken place on the east ing lanes, traffic will be structural steel and 584,000 companies, which has a shop/yard side of town and it can no longer shifted onto the other lanes. lbs. (264,897 kg) of rein- that is eight mi. from the project. handle the capacity. It’s still the So far no unexpected forcing steel for the bridge; Mechanics from the shop visit the original concrete pavement that issues have arisen. KDOT photo 100,000 sq. ft. (9,290 sq m) work site as needed. Major repairs has lasted this long. There was no “We did start to install existing bridge at Kellogg and some storm sewer for the “The project is nearing the end of the first of soldier pile and MSE have equipment sent to the shop. phase of construction — utility work,” said retaining wall and 17,500 ft. “We do as much as we can in the Webb — just an at-grade intersecwidening of the east side of (5,334 m) of waterline and field,” said Farrington. tion, which is being turned into a Kellogg and we found some Gary Janzen, PE, Wichita’s city engineer. sanitary sewer relocations. Equipment and vehicles current- grade-separated interchange. We sanitary sewer conflicts,” Concrete, asphalt and steel ly being used include mostly Cat will be building the first bridge on said Farrington, “but the design that the inspection staff get everything accounted for on the pay estiremoved from the project is being 314, 320 and 329 excavators; Cat the site.” consultant designed a sanitary taken to local recycling and scrap 938 and 950 loaders; Cat D5 and (This story also can be found sewer relocation, which we are mates.” Wildcat expects to remove facilities as much as possible. D6 dozers; and Cat 615 and 623 on Construction Equipment putting in to open space for the approximately 75,000 tons (68,038 Save for mandatory night work scrapers. As work ramps up, Guide’s website at www.constorm sewer.” t) of existing concrete and asphalt on various elements that will Wildcat expects to bring in a larger structionequipmentguide.com.) Cooperation is key to success on the project and that “team effort” pavements, plus thousands of tons reduce the number of lanes for excavator and a 60 to 80-ton (54 to CEG WILDCAT from page 44

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 59

KY 859.485.8500 | FL 863.533.8900

Illinois Truck & Equipment

Highway Equipment Company of Ohio

Newman Tractor

320 Briscoe Drive • Morris, IL 60450 815-941-1900 • Fax: 815-941-1486 www.iltruck.com

1405 Timken Place SW • Canton, OH 44706 330-915-8391 • Fax: 330-915-8411 www.highway-equipment.com

2841 Verona Road • Verona, KY 41092 859-485-8500 • Fax: 859-485-8573 www.newmantractor.com

Page 60 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 61

Page 62 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Liebherr Designs Crawler Tractor for Mining, Quarries Liebherr’s first crawler tractor in the 77 ton (70 t) category — the PR 776 — is designed for tough mining and quarry operations. The new PR 776 is powered by a Liebherr 12-cylinder diesel engine developing 762.7 hp (565 kW). The PR 776 has a maximum operating weight of 81.6 ton (74 t) and is equipped with blade capacities of 23.5 cu. yd. (18 cu m) (semiU blade) or 28.8 cu. yd. (22 cu m) (U blade). Efficiency and Performance: Modern, Infinitely Variable Drive Concept The modern drive concept of the new PR 776 offers efficient and safe operation to customers. A new feature in this machine class is the infinitely variable hydrostatic travel drive, which is used for all crawler tractors from Liebherr Another advantage of the modern drive concept is the optimization of pressure flow. Hydraulic servo pressure is based on demand according to the task. If, for example, the full feed of pressure supply is not required when operating, this is automatically returned. The ECO function is standard for all Liebherr Generation 6 crawler tractors — including the new PR 776. It allows operators to choose between high performance and maximum efficiency. The ECO control system enables greater travel drive efficiency in light to medium operations, and also provides greater fuel savings. The proactive power control is another innovation of the 6th generation crawler tractors. Internal engine and external machine parameters are recorded, such as the current deflection of the joystick. If required, the engine power is automatically increased for a brief period based on the current requirement. As well as responding more rapidly, the machines offer a significant increase in performance potential and pulling power and a higher reverse speed, according to the manufacturer. Liebherr custom-engineers integral equipment solutions. The intelligent Liebherr engine management system combined with the Liebherr power efficiency system and the hydrostatic driveline allows Liebherr to master and opti-

mize all equipment systems and processes to maintain constant engine speed, increase overall machine efficiency and reduce fuel consumption of the PR 776. Differentiating Liebherr’s travel drive concept from other drive concepts available on the market, with which the engine speed fluctuates sharply during operation. All of these measures lead to significantly lower fuel consumption than the industry standard with similar pushing performance. Another key advantage of hydrostatically powered crawlers when working in restricted spaces is the maneuverability with continuous power to both tracks. With an optional GPS navigation system, the work progress and the surrounding area can be visualized. increasing machine productivity and minimizing operator stress and strain. Pendulum-mounted guide wheels and track rollers ensure enhanced chain traction and significantly reduce equipment vibration. Operator Comfort: Intuitive Operation The operator quickly finds his bearings in the new PR 776 platform developed especially for this machine class. A focal point for development was the simple and safe operation of the crawler tractor. The multifunction joystick houses all operating and steering movements at the palm of the operator’s hand with only one electronic input element. This intuitive operating concept was subject to rigorous testing at Liebherr and is an important innovation for the 77 ton crawler tractor’s category, particularly in mining applications. The modern and spacious workstation in the PR 776 ensures excellent environment for greater performance and relaxed working conditions. The cab is purposely designed and all instruments and operating controls are carefully organized for easy reach. All key functions and machine settings can be adjusted by the operator via the touchscreen display. ECO function parameters, automatic engine speed reduction, travel drive response, steering as well as standard safety functions such as the rear view camera can be all be

The new Liebherr crawler tractor PR 776 is suitable for mining and quarry operations.

accessed through the intuitive touchscreen display. Operators can conveniently adjust multiple machine settings including travel drive, blade and rear ripper to their needs. Ergonomically shaped joysticks ensure operator’s comfort. An automatic air-sprung seat detects and adjusts to the operator and deactivates the machine when exiting the cab without a safety lever having to be actuated.

and operating fluids. Another safety factor is the newly developed illuminated safety ladders. For optimal illumination of the working area, high performance LEDs are used depending on the chosen equipment level. The modular lighting concept is an element of the new machine design and makes it possible for the lighting to be adapted optimally to the respective use.

Maximum Safety With Excellent View of Equipment and Surrounding Area The modern design of the new Liebherr PR 776 offers all-round visibility for safe and efficient dayto-day operation. Safety is enhanced by the visibility of the work site, the blade and rear ripper which is assured by the larger panoramic windows and downward slopes on the PR 776. A new feature in this class is the ROPS / FOPS protection integrated directly in the cab structure as standard for Liebherr crawler tractors. Forward visibility is completely unobstructed as the exhaust system and lifting rams have been positioned behind the A-pillars. Also the side view of the working area is clear and unobstructed by the extended work platform. This allows access to the cab, service points and filler necks for auxiliary

Reliability: Robust Components Manufactured In-House Liebherr diesel engines have powered construction machinery around the world for decades. Developed for tough conditions, they guarantee maximum operational safety, reliability and a long service life due to the robust design and modern technology. With the tried-and-tested hydrostatic Liebherr travel drive, components with high wear such as multi-speed gearboxes, steering clutches or service brake are not installed. Instead, the high-quality hydraulic pumps and engines work practically wear-free and are particularly reliable, according to the manufacturer. Liebherr also has custom-developed different configuration packages in-house for extreme applications such as desserts where extreme climates and low temperatures are common.

Optimal Service Accessibility and Long Change Intervals Centrally located maintenance points, access flaps and engine compartment doors that open to a wide angle, a tilting cab as standard equipment and, as an option, a radiator fan that can be swung out for cleaning are all features that speed up and simplify servicing work on the new Liebherr crawler tractor. The new PR 776 has exceptionally long change intervals for operating fluids such as hydraulic or engine oil. Depending on the nature of the work, and provided that regular checks are performed, the change interval for Liebherrplus oils can be as long as 8,000 hours of operation. The standard Liebherr fleet management system LiDAT provides an accurate, efficient overview of essential servicing work, warning messages, the machine’s position and actual consumption data and filling levels. Depending on the agreement with the customer, the data is updated several times a day and can be called up whenever needed via the Internet. For more information, visit www.liebherr.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ July 2, 2016 â€˘ Page 63

CONSTRUCTION MACHINERY COMPANY www.cmcky.com 2911 S. English Station Rd. Louisville, KY 40299 502-267-4020 866-901-2262 Fax: 502-261-9251 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 877-683-2262 Fax: 270-683-3727 267 W. Jay Louden Rd. Carrollton, KY 41008 502-732-4661

HAYDEN-MURPHY EQUIPMENT COMPANY www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757 Fax: 952-884-2293

Link-BeltÂŽ Spin AceÂŽ ([FDYDWRUV DUH SDFNHG ZLWK DOO WKH SRZHU SURGXFWLYLW\ DQG IXHO HIÂżFLHQF\ \RXÂśYH come to expect from us - along with a minimum swing radius design for better maneuverability at sites where work space is at a premium. Thoughtful redesign of counterweights and boom placement makes them ideal for residential construction, utility work and specialty trenching jobs. Â‡ Roomy, redesigned cab Model # Operating Wt. Â‡ +LJK GHÂżQLWLRQ IXOO FRORU 75 X3 Spin Ace 17,400 lbs. ĆŽ /(' PRQLWRU 80 X3 Spin Ace OEV Â‡ Convenient ground-level 145 X3 Spin Ace 33,200 lbs. VHUYLFH DQG Ă€XLG FKHFNV 235 X3 Spin Ace OEV Â‡ Extended service intervals Â‡ 7LHU $ FHUWLÂżHG ,VX]X HQJLQHV Â‡ 3-year subscription to RemoteCAREâ„˘ telematics

Net hp @ rpm

Tail Swing

54 hp @ 2,000 rpm 54 hp @ 2,000 rpm 100 hp @ 2,000 rpm KS # USP

Ć? ĆŽ Ć? ĆŽ Ć? ĆŽ Ć? ĆŽ

KELBE BROTHERS EQUIPMENT CO. www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262-781-4970 Fax: 262-781-9671 4621 Dutch Mill Rd. Madison, WI 53716 608-221-8300 3101 French Rd. De Pere, WI 54115 920-343-6496

$OO WKLV ZLWK WKH LQGXVWU\ÂśV EHVW VWDQGDUG ZDUUDQW\ Your Link-Belt Excavator dealer has the right Spin Ace for your application, along with uncompromising service and support to keep them performing at their best. *75 X3 and 80 X3 engines are Final Tier 4

Page 64 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

D RE CE IV E UP T O AN , R, EE ST D ID SK T EN RR CU TR AD E YOU R

W HE N YOU SW IT CH T O GE HL BY JU LY 31 , 20 16

2,6 2,600 lbs. capacity ca

2,700 lbs. capacity

Rebates and Competitive TTrade rade of offer ffer fer expires 7/31/2016. AAvailable vailablee at eligible and participating p p g authorized Gehl dealers ffer fer not available to government accounts, national accounts, and municipal/utility in the United States and Canada. Of Offer rade Rebate requires a trade-in of a competitive skid loader brand bid customers. Some restrictions apply apply.. Competitive TTrade fer valid only on qualify.. Of Offer to qualify ffer o purchases of a Gehl R260 or Gehl V270 GEN:2. See dealer for more details. Manitou Americas, Inc. reserves the right to extend or discontinue any of these programs at any time without notice.

gehl.com

CALL Y YOUR OUR L LOCAL OCAL GEHL DEALER FOR MORE DET DETAILS! AILS! Alta Equipment Company 28775 Beck Rd. Wixom, MI 48393 248-449-6700 Fax: 248-449-6701 www.altaequipment.com 2470 W. Columbia Ave. Battle Creek, MI 49015 269-965-1269 Fax: 269-965-1881 8840 Byron Commerce SW Byron Center, MI 49315 616-878-7450 Fax: 616-878-7650

Elder Ag and Turf

4716 Talon Ct. S.E. Kentwood, MI 49512 616-698-2960 Fax: 616-698-2901

28855 Smith Rd. Romulus, MI 48174 734-641-8238 Fax: 734-641-8334

9433 Riley St. Zeeland, MI 49464 616-748-4108 Fax: 616-748-4120

6327 Jomar Ct. Lansing, MI 48917 517-272-5033 Fax: 517-272-7257

1524 Champagne Dr. Saginaw, MI 48604 989-752-9400 Fax: 989-752-9834

1061 Stepke Court Traverse City, MI 49685 231-943-3700 Fax: 231-943-8110

5920 Grand Haven Rd. Muskegon, MI 49441 231-798-9754 Fax: 231-798-9387

7500 E. 15 Mile Rd. Sterling Hts., MI 48312 586-977-6000 Fax: 586-977-6099

56195 Pontiac Trail New Hudson, MI 48165 248-356-5200 Fax: 248-356-2029

49290 State Route 14 East Palestine, OH 44413 330-426-2166

Custom Truck & Equipment 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

Company Wrench 4805 Scooby Ln. NW Carroll, OH 43112 866-262-4181 740-654-5304 Fax: 740-687-9130

Cincinnati Branch 3120 S. Verity Pkwy. Middletown, OH 45044 513-649-8105 Fax: 513-649-8107

Cleveland Branch 525 Golden Oak Pkwy. Oakwood Village, OH 44146 440-439-4567 Fax: 440-439-1789

1554 Old Frankfort Pike Lexington, KY 40504 866-262-4181 Fax: 859-254-1107

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 65

• NO TIME LIMIT POWER BOOST

• 10% MORE BUCKET BREAKOUT • OPERATOR CONTROLLED UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULE We know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.

MINI

SHORT RADIUS KOBELCO-USA.COM

CONVENTIONAL

Page 66 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

YOUR VISION.

BUILT TO SPEC.

Building your construction business together. You have pretty clear ideas about the equipment you need to succeed. So we used them as a blueprint for our E-Series Skid Steers and CTLs. You ZDQWHG PRUH IRRW URRP :H DFKLHYHG LW E\ PDNLQJ WKH ƠRRUV ƠDW <RX ZDQWHG PRUH KRUVHSRZHU We upped it by 10 percent on our large-frame models. You wanted switchable controls. We offer selectable ISO, H-pattern, and foot controls on all models. You wanted easier attachment hookup. We hooked you up. To learn more, see your dealer or visit our website.

www.erbequipment.com Fenton, MO 63026 Mt. Vernon, IL 62864 618/244-6800 636/349-0200 Paducah, KY Cape Girardeau, MO 270/554-1131 63703 Owensboro, KY 573/334-0563 270/684-2339 Foristell, MO 63348 Evansville, IN 636/463-2500 812/473-0484 Cuba, MO 65453 573/885-0500

www.lec1.com Ashland, KY 606/928-3477 Pikeville, KY 606/432-0321 Marietta, OH 740/373-5255 Cowen, WV 304/226-3299

Beaver, WV 304/255-1525 Elkins, WV 304/636-6421 Cross Lane, WV 304/204-1818

www.westsidetractorsales.com 1400 W. Ogden Ave Naperville, IL 60563 630/355-7150 Fax: 630/355-7173 South Holland, IL 708/331-6362 Rockdale, IL 815/730-9011 Wauconda, IL 847/526-7700

Rockford, IL 815/961-3160 Bloomington, IN 812/333-9677 Indianapolis, IN 317/544-3411 South Bend, IN 574/232-1461 Lafayette, IN 765/447-6933

www.jdequipment.com London, OH 614/ 879-6620 Washington Court House, OH 740-335-2071 Lancaster, OH 740-653-6951 Marion, OH 740-389-5458

Wilmington, OH 937-486-5211 Hilliard, OH 614-527-8800 New Albany, OH 614-475-0707 Zanesville, OH 740-450-7446

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 67

RESPECTFULLY DISREGARDS CONVENTIONAL EXCAVATOR WISDOM. Plenty of people make compact excavators. But none can say they engineered the first mini-excavator, zero tail swing excavator, swing-boom excavator and rubber-tracked excavator. At Yanmar, we simply can’t stop innovating. That’s why our nine excavators – seven with true zero tail swing – are each purpose-built to overcome the most challenging conditions, work with unparalleled power and conserve fuel. So, if you just want to play around on your jobsite, go get any old excavator. BUT IF YOU’D RATHER RULE YOUR JOBSITE, GET A YANMAR. RuleTheJobsite.com

BUCK & KNOBBY EQUIPMENT CO. 6220 Sterns Rd Ottawa Lake, MI 49267 734-856-2811

CUSTOM TRUCK & EQUIPMENT 7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

VERMEER MIDWEST 2801 Beverly Dr. Aurora, IL 60502 630-820-3030

3310 W. Coliseum Blvd. Fort Wayne, IN 46808 260-484-2494

120 E. Martin Dr, Goodfield, IL 61742 309-965-3300

940 Garden Ln. Fowlerville, MI 48836 517-915-0555

1801 179th St. North East Moline, IL 61244 309-751-9540

621 Spirit Valley E Dr. Chesterfield, MO 63006 636-532-2332

13402 Britton Park Rd. Fishers, IN 46038 317-842-1040

1098 Franklin St. Marne, MI 49435 616-677-5900

VERMEER OF IOWA & NORTHERN MO PO Box 168-661 Hwy T14 Pella, IA 50219 641-628-2000

VERMEER OF THE BLUFF 22025 221st St. Glenwood, IA 51534 712-302-9100

PAINT VALLEY EQUIPMENT 4858 D Ave. Marcus, IA 51035 712-376-2310

10550 Twp Rd. 262 Millersburg, OH 44654 877-774-0081 Fax: 330-674-4031

VERMEER OF EASTERN IOWA

ROEDER IMPLEMENT INC.

VERMEER SIOUXLAND

101 Commerce Blvd. Tipton, IA 52772 563-886-2444

2550 Rockdale Rd. Dubuque, IA 52003 563-557-1184 Fax: 563-583-1821

Page 68 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Association Officials Say Both Sets of Data Reflect Strong Market EMPLOYMENT from page 1

jobs, 7 percent). The largest percentage gains occurred in Monroe, Mich. (30 percent, 700 jobs); El Centro, Calif. (26 percent, 700 jobs); Urban Honolulu, Hawaii (20 percent, 5,000 jobs) and Haverhill-Newburyport-Amesbury Town, Mass.-N.H. (20 percent, 800 jobs). The largest job losses from April 2015 to April 2016 were in Midland, Texas (minus 2,200 jobs, minus 8 percent), followed by Odessa, Texas (minus 1,900 jobs, minus 11 percent) and Omaha-Council Bluffs, Neb.-Iowa (minus 1,800 jobs, minus 7 percent). The largest percentage declines were in Bloomington, Ill. (minus 31 percent, minus 1,100 jobs); Dothan, Ala. (minus 16 percent, minus 500 jobs) and Fairbanks, Alaska (minus 14 percent, minus 400 jobs). Construction spending increased 4.5 percent from April 2015 to April 2016 despite a drop of 1.8 percent from March to April, Simonson noted. Private residential spending increased 8.0 percent over the year; private nonresidential spending climbed 3.4 percent; and public construction spending rose 1.2 percent. Association officials said both sets of data reflect relatively strong market conditions for the construction sector. The two main industry concerns remain the availability of qualified workers and the need for new investments in aging infrastructure. They added that the group would continue to

“While few cities have returned to their prior peak levels, construction head counts continue to climb in most areas.” Stephen E. Sandherr AGC

push elected officials to act on its Workforce Development Plan and pass aviation and water resources development bills. “While few cities have returned to their prior peak levels, construction head counts continue to climb in most areas,” said Stephen E. Sandherr, the association’s chief executive officer. “Federal, state and local officials should focus on enacting measures to recruit and prepare future workers and improve aging airports, water systems and other public infrastructure.” For more information, visit www.agc.org. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Hyundai Expands in North America With Addition of Four New Dealers Hyundai Construction Equipment Americas announced the expansion of its North American authorized dealer network with the addition of four dealerships, including three in the United States and one in Canada. With the addition of these new dealerships, Hyundai’s North American network now includes 71 dealerships operating in more than 125 locations, offering sales, service and parts for the full line of Hyundai excavators, wheel loaders, compaction rollers and other construction equipment. Joining the Hyundai authorized dealer network are EquipmentShare, serving northern and eastern Missouri from its location in Columbia, Mo.; RECO Equipment Inc., headquartered in Belmont, Ohio, and serving Ohio, Indiana, eastern Kentucky and eastern Tennessee from multiple locations; OSC Manufacturing & Equipment

LOGAN CONTRACTORS SUPPLY, INC. www.logancontractors.com Des Moines 4101 106th Street • Des Moines, Iowa 50322 515-253-9048 • Fax: 515-253-9491 Quad Cities 4114 State Street • Bettendorf, Iowa 52772 563-441-2949 • Fax: 563-441-2953 Kansas City 1325 S. Enterprise Drive • Olathe, Kansas 66061 913-768-1551 • Fax: 913-768-1171 Omaha 6544 L Street • Omaha, Nebraska 68117 402-339-3900 • Fax: 402-597-0694

The addition to our authorized dealer network of established, successful dealerships in the United States and Canada continues strengthening our ability to meet the needs of construction equipment customers across North America. Stan Park Hyundai Construction Equipment Americas

Services Inc., serving western New York state from its location in Buffalo; and Bobcat of Ottawa, serving eastern Ontario from its location in Ottawa. “The addition to our authorized dealer network of established, successful dealerships in the United States and Canada continues strengthening our ability to meet the needs of construction equipment customers across North

America, and testifies to the value of the Hyundai Construction Equipment brand,” said Stan Park, manager, strategic distribution, Hyundai Construction Equipment Americas. For more information, call 877/5092254 or visit www.hceamericas.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

BURRIS EQUIPMENT 2216 N. Greenbay Rd. • Waukegan, IL 60087 847-336-1205 • Fax: 847-336-2697 www.burrisequipment.com Ingleside, IL 815-363-4100 Joliet, IL 815-464-6650

FRANKLIN EQUIPMENT, LLC www.franklinequipmentllc.com Columbus Superstore 4141 Hamilton Square Boulevard • Groveport, OH 43125 614-228-2014 • 800-282-1438 Westerville 5755 Westerville Rd. • Westerville, OH 43081 614-948-3409 Indianapolis 1925 S. Kentucky Ave. • Indianapolis, IN 46221 317-686-0996 Dublin 7570 Fishel Drive South • Dublin, OH 43016 614-389-2161 Newcomerstown 6206 US Hwy 36 SW • Newcomerstown, OH 43832 740-492-0455

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 69

MUELLER IMPLEMENT, INC. www.muellerrental.com 4948 County Road YZ • Dodgeville, WI 53533 608-935-2751

INDY EQUIPMENT www.indyequipment.com 6500 Schaaf Rd. • Independence, OH 44131 216-446-3200 • Fax: 216-573-7712 11159 Royalton Rd. • North Royalton, OH 44133 440-237-9040 35350 Chester Rd. Avon, OH 44011 440-832-7133

BUCK & KNOBBY www.buckandknobby.com 6220 West Sterns Road • Ottawa Lake, MI 49267 Toll Free: 855-213-2825 • 734-856-2811

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 17000 Highway 41 N • Evansville, IN 47725 812-425-4491 7310 Venture Lane • Fort Wayne, IN 46818 260-489-4551 8410 Zionsville Road • Indianapolis, IN 46268-1524 317-872-8410 1801 Watterson Trail • Louisville, KY 40299 502-491-4000 1484 American Greeting Card Rd • Corbin, KY 40701-4813 606-528-3700 1389 Cahill Drive • Lexington, KY 40504-1167 859-259-3456 160 County Park Road • Paducah, KY 42001 270-444-8390

Page 70 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 71

www.arnoldsinc.com Arnold’s of Kimball 701 State Hwy 55 E • Kimball, MN 55353 320/398-3800

Ready y. Set. Save on o Kubota’s SSV Series skid steer loader s.

Arnold’s of Glencoe 655 Lindbergh Trail • Glencoe, MN 55336 320/864-5531 Arnold’s of St. Martin 374 Industrial Drive • St. Martin, MN 56376 320/548-3285 Arnold’s of Mankato 1715 Howard Drive • Mankato, MN 56003 507/387-5515 Arnold’s of St. Cloud 2995 Quail Rd. NE • St. Cloud, MN 56379 320/251-2585

BURRIS EQUIPMENT CO. www.burrisequipment.com 2216 N. Green Bay Rd. • Waukegan, IL 60087 847/336-1205 Fax: 847/336-2697 27939 W. Concrete Dr. • Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. • Joliet, IL 60433 815/464-6650 Fax: 815/464-6951

COLUMBUS EQUIPMENT COMPANY www.columbusequipment.com 2329 Performance Way • Columbus, OH 43207 614/443-6541 12500 Williams Road • Perrysburg, OH 43551 419/872-7101 7570 New Carlisle Pike • Dayton, OH 45424 937/879-3154

Long Term Low Rate Financing

Customer Instant Rebates going on right now!

kubota.com

1st CHOICE EQUIPMENT LLC 124 N. Schmale Rd. • Carol Stream, IL 60188 630/510-6050 Fax: 630/510-6051 1305 Sentry Drive • Waukesha, WI 53186 262/521-5802 Fax: 262/521-5801

LANO EQUIPMENT INC. www.lanoequip.com

6140 Highway 10 Anoka, MN 55303 888/448-5266

3021 West 133rd St. Shakopee, MN 877/753-6100

23580 Highway 55 Loretto, MN 888/479-4342

NIEBUR TRACTOR & EQUIPMENT, INC. www.nieburtractor.com 14380 240th St. E. Hastings/Miesville, MN 55033 888/839-6860

MARTIN IMPLEMENT SALES, INC. www.martinimplement.com 18405 115th Avenue Orland Park, IL 60467 708/349-8430 Fax: 708/349-4230

ABC EQUIPMENT RENTAL & SALES INC. www.abcequipment.com 29 Pearl Rd. • Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 38525 Chester Rd. • Avon, OH 44011 440/934-7368

Page 72 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Sold-Out Drone Event Features Numerous Speakers DRONE from page 16

one company one year and one million dollars to produce an image, manually and via satellite, was done in one year and at a cost of approximately $15,000, using six of senseFly’s eBee drones. One of the few speakers who presented at the inaugural Drone Focus Conference last year, Matt Hayes, mapping product supervisor, RDO Integrated Controls, returned to discuss renewable energy and civil applications for UAS. After his presentation, Hayes commented on the increased level of participation at this year’s event and said, “The growth was noticeable. In one year, this event went from a few speakers and about 100 drone enthusiasts to more than 20 speakers and 300 attendees, and people in all areas of the industry, from drone manufacturers and entrepreneurs, to business owners and students.” Hayes also pointed out how noteworthy the industry growth has been in the course of a year, saying, “Last year, we were discussing all the possibilities. Things we could do, what we expected for this industry. Now this year, our discussions were based on experiences. We have more info, we have concrete data, we all have so much more knowledge we can share, and that’s really exciting to see.” Additional, Notable Speakers: Ed Adelman, director of safety and analytics of Union Pacific Railroad John Cavolowsky, director of NASA’s Airspace Operations and Safety program JD Claridge, CEO and co-founder of xCraft, the drone company famous for netting a deal with all five investors on the popular TV show, “Shark Tank.” Mark R. Hagerott, chancellor of the North Dakota University System Stuart Munsch, Rear Admiral, United States of America Drew Wrigley, lieutenant governor of North Dakota (This story also can be found on Construction Equipment Guide’s website Ted Horan (L), director of marketing, and Jason Pearson, regional sales manager, both of RDO Integrated Controls, Bismarck, N.D. at www.constructionequipmentguide.com.)

Customers Learn About Technology ROLAND from page 14

and the cut, but also is tied into the transmission control and engine control. “The systems look at engine load as well as transmission load, and we can monitor track slippage to protect our final surfaces as well as blade load optimization,” said McDowell. “The machine is dictating how much material to cut and how much material to carry each time that it is put into the dirt. On our larger models and even as an option on our smaller models, we have a back

drag feature where we can grade in reverse as well.” One unique feature of the dozers is that it has the ability to run in automatic grade mode 100 percent of the time, according to the company. By allowing the factory integrated system to dictate blade load and track slippage, it allows the operator to primarily focus on how he is moving material, and not dividing his attention three different ways between a monitor, his material and the machine. “On the excavators, which is kind of

Steve Mitchell (L), Roland Machinery Co., goes over the engine of this Komatsu PC210LCi-10 excavator with Gary Kelley, Sauk County highway department.

our bread and butter, we’ve actually made an excavator that when semiAutomatic grade control is turned on, comes down to a targeted design surface and stops. It automatically stops the boom and as the operator moves the arm in towards the house that boom will make height adjustments through the GPS system allowing the bucket to trace a targeted grade. No matter if it’s a simple slope or a complex design that you are trying to follow a feature line on. That bucket will never over dig your surface, and it will never over dig on the side or the bottom, because it’s looking at a complete profile of the bucket. No matter which portion the operator wants to work on, it’s limiting that boom from ever over digging the surface. Even when semi-automatic mode is turned off in the machine, the monitor still gives all the same information as a traditional indicate excavation system would.” For more information, visit www.rolandmachinery.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.) CEG

Matt Roland (R), president of Roland Machinery Co., welcomes Terry Kohn, owner of Terry Kohn Excavating, to the demo of the intelligent machine control.

Steve Muchow (L), Sauk County highway department, speaks with Mark Klein, Roland Machinery Co. territory manager.

Page 74 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Volvo L45H, L50H Compact Wheel Loaders Deliver High Breakout Torque The H-series wheel loaders from Volvo Construction Equipment (Volvo CE) are powerful assets on every job site and in every application. Equipped with Volvo’s torque parallel (TP) linkage, these machines are built to deliver high breakout torque and excellent parallel movement throughout the entire lifting range. With a new Volvo D4J Tier IV Final engine both the L45H and L50H boast a 15 percent improvement in fuel efficiency versus previous models. The L50H also has an impressive 20 percent improvement in hydraulic pump capacity, leading to 26 percent faster cycle times as compared to previous models, according to the manufacturer. “This is a very versatile size class that can get tough work done in confined spaces,” said John Comrie, product manager of compact wheel loaders at Volvo CE, “and with a laundry list of improvements that make the H-series more fuel efficient, more powerful and more versatile, all while making the operator more comfortable — the L45H and L50H are great choices for any application.” The L45H and L50H feature Volvo’s intelligent load-sensing hydraulic system that drives power to the hydraulic functions according to demand for fast response, shorter cycle times and reduced fuel consumption. An optional boom suspension system (BSS) boosts productivity by up to 20 percent by absorbing shock and reducing bouncing and bucket spillage. Heavy-duty planetary axles ensure long life in the toughest conditions, and the front and rear 100-percent differential locks feature a dog clutch design to improve grip and maintain maximum traction on all terrain. These wheel loaders also feature a hydrostatic transmission that matches power to all operator requirements to provide excellent control in delicate work and full power for more demanding jobs. A Comfortable Control Center The L45H and L50H’s cab is designed for a comfortable, productive work shift. This certified ROPS/FOPS cab features ergonomically placed controls, a superior climate control system, all-around visibility and low internal noise levels. The optional comfort drive control (CDC) function gives the operator the choice to control the machine by a joystick lever mounted to

With a new Volvo D4J Tier IV Final engine both the L45H and L50H boast a 15 percent improvement in fuel efficiency versus previous models.

“This is a very versatile size class that can get tough work done in confined spaces.” John Comrie Volvo CE

the left-hand console. This improves operator comfort, reduces fatigue and ensures better productivity over long working hours. For increased safety, large, anti-slip steps and handrails ensure easy cab entry and exit. Maintenance Made Easy Volvo’s L45H and L50H have been built for easy, hassle-free servicing. Ground-level service points and grouped greasing points ensure easy and quick maintenance. The oscillating rear axle is supported on maintenancefree cradles. Its bearings and bushings are lubricated for life and protected by well-proven seals, saving hours of maintenance time. Through the Volvo CareTrack telematics monitoring system, fleet managers are given real-time visibility into vital machine information. Everything from fuel consumption and idle times to location tracking and service reminders can be monitored to help reduce total cost of ownership and increase profitability throughout the entire life of the machine. Fleet managers also have the option to engage their local Volvo CE dealer in the proactive monitoring and reporting of CareTrack data through

the Volvo ActiveCare program, effectively simplifying fleet management. The L45 and L50H models are offered further support via the Volvo Lifetime Frame and Structure Warranty, which covers the frame, articulation joint and loader arm during the period of initial ownership or the full life of the machine — whichever is less. Get Attached These wheel loaders are designed to work in harmony with a range of Volvo attachments — from forks and buckets, to grapples and material-handling arms — each perfectly matches the link-arm geometry to optimize breakout, rim pull and lifting force. These machines can be factory-fitted with extra hydraulic lines to operate and run a variety of attachment options, and the standard attachment bracket is ISOstandardized for quick and easy interchange of attachments. For more information, call 717/5329181 or visit www.volvo.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677 Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461

www.brookstractor.com Sun Prairie, WI 608/837-5141 Milwaukee, WI 414/462-9790 De Pere, WI 920/336-5711 West Salem, WI 608/786-2644 Plover, WI 715-254-2777 Coming 2016 Mt. Pleasant, WI

Construction Equipment Guide â€¢ Wheel Loaders, Tool Carriers & Attachments Section â€¢ www.constructionequipmentguide.com â€¢ July 2, 2016 â€¢ Page 75

YOUR IDEAS.

BROUGHT TO THE SURFACE.

Building your aggregate business together. With input from loader users like you, our K-II Series Loaders are beefed up and back for more. Larger, higher-capacity axles with standard axle coolers DQG Æ&#x;OWUDWLRQ SURYLGH KHDY \ GXW\ RQ WKH Æ \ GLIIHUHQWLDO ORFNV IRU WUDFWLRQ RQ WRXJK WHUUDLQ )LQDO 7LHU HQJLQHV XVH KLJK XSWLPH H[KDXVW Æ&#x;OWHUV DQG VHOHFWLYH FDWDO\WLF UHGXFWLRQ 6&5 WR PHHW HPLVVLRQV UHJXODWLRQV ZLWK QR ORVV RI SRZHU RU HIÆ&#x;FLHQF\ $QG GDWD IURP WKH RSWLRQDO / SD\ORDG VFDOH FDQ EH YLHZHG UHPRWHO\ LQ -'/LQNÆ€ ,WÅ¤V DOO EDFNHG E\ 8OWLPDWH 8SWLPH IHDWXULQJ -RKQ 'HHUH :RUN6LJKWÆ€ RXU FXVWRPL]DEOH VXSSRUW VROXWLRQ /HDUQ PRUH IURP \RXU GHDOHU RU YLVLW RXU ZHEVLWH

www.nortrax.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Monico, WI 715/487-5583 Mosinee, WI 715/693-3820 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

Page 76 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Case 521F Wheel Loader Meets Tier IV Final Standards Case Construction Equipment’s 521F wheel loader meets federal Tier IV Final emissions standards using selective catalytic reduction (SCR) technology. The new machine delivers 131 net peak horsepower with an FPT Tier IV Final-certified engine that also provides quick throttle response and impressive torque. The 22,948-lb. (10,409 kg) wheel loader has a bucket breakout force of 19,303 lbs. with 2.3-cu.-yd. (1.7 cu m) bucket capacity. The SCR technology allows the machine to handle inconsistent engine loads while running at peak performance without compromising power. This is accomplished with a faster throttle response and acceleration, all while maintaining lower exhaust temperatures and improving fuel efficiency, according to the manufacturer. The Case for SCR With SCR technology, the 521F Tier IV Final wheel loader features 10 percent greater fuel economy over wheel loaders featuring CEGR-DPF solutions. Additional fuel savings are achieved with a standard auto-idle feature that helps minimize excessive fuel burn during operator inactivity by further lowering engine RPM. Standard auto shutdown then shuts down the engine after an operatorselected length of time to further preserve fuel. The SCR-only approach found on the new 521F also contributes to machine uptime by eliminating the need for manual diesel particulate filter (DPF) regeneration and the associated downtime that can occur with wheel loaders that use cooled exhaust gas recirculation (CEGR) technology. As an after-treatment system with minimal components, there also is no need for recirculation equipment or a DPF for lower long-term maintenance costs. Additionally, SCR results in extended time between service intervals as lower ambient exhaust temperatures result in slower degradation of engine components and less demand on the coolant system, according to the manufacturer. With Productivity in Mind Like the rest of the F series line-

Case’s 521F wheel loader delivers 131 net peak horsepower with an FPT Tier IV Final-certified engine that also provides quick throttle response and impressive torque. The 22,948-lb. (10,409 kg) wheel loader has a bucket breakout force of 19,303 lbs. with 2.3-cu.-yd. (1.7 cu m) bucket capacity.

up, the 521F wheel loader incorporates powerful and quick hydraulics in addition to a host of features that further enhance machine efficiency and productivity. Among them are: • Standard limited-slip axles that provide traction on slippery or uneven surfaces, with optional heavy-duty axles with locking front differential to reduce tire wear when operating on hard surfaces. • Available with standard Z-bar linkage for large operating loads; XR linkage for extended reach and dump clearance; and the tool-carrier XT linkage for maximum utility, excellent visibility and parallel lift. • A wide variety of tires, including snow tires. • Buckets available with the 521F feature the optional SmartFit bucket tooth system. These heavy-duty self-sharpening

teeth combine strength and an unmatched ease of installation due to a hammerless fastener system with reusable locking pins. • An expanded selection of attachments, including new buckets, rotary brooms and forks. Optimal Comfort To provide total comfort and help boost the operator experience, the 521F wheel loader features the Case quiet cab. A dual air filtration system, optional heated air-ride seat and insulated cab mounts provide a clean, quiet operating environment while floor-to-ceiling windows, an improved lighting system and optional rearview camera provide visibility all around the machine. The 521F also features an award-winning joystick steering option and an advanced instrument cluster with four selectable power modes (economy, standard, max and auto) for precise, intuitive con-

trol.

the back of the machine.

Innovative Cooling and Easy Service The 521F features the Case midmounted cooling system. Unlike stacked coolers on other machines that transfer hot air to the inner coolers, the Case cooling system is configured like a cube with all coolers facing fresh and cool ambient air. This improves the effectiveness and efficiency of the cooling system — and also makes it easier to clean. Another benefit of the design is that it moves the engine lower and more to the rear of the wheel loader, which improves balance and access to critical daily service points. The 521F features groundlevel fluid gauges and a tilt-up rear hood that provides complete engine access. The lower profile also allows for a sloped rear hood that further improves visibility to

Protecting Your Investment The 521F wheel loader is covered under Case ProCare — an allin-one heavy machine support program. ProCare includes a suite of product assurances that include a three-year Advanced Case SiteWatch telematics subscription, a three-year/3,000-hour fullmachine factory warranty, and a three-year/3,000-hour planned maintenance contract. ProCare allows business owners to invest in new equipment while helping to make owning and operating costs predictable for the first three years of ownership. For more information, visit www.casece.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 77

ONE FOCUS. COMPLETE

SOLUTIONS.

> > > > >

> > >

Page 78 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

FOR MORE INFORMATION INFORMATION VISIT US AATT WWW WWW.RMSEQUIPMENT.COM .RMSEQUIPMENT.COM OR CALL CALL SC SCOTT OTT KROPIWKA KROPIWKA AATT 952-895-7070 $49,500

0% Dow Downn

2015 T Takeuchi akeuchi TL10 362 Hours SN:201000577

1.99% for 36 Mont Months hs*

90 Day Day 50/50 Pow Power er Train Train W arranty Warranty

$99,500

2012 Komatsu WA320PZ-6 WA320PZ-6 SN:71223

$29,900

2008 W Wacker acker 850 SN: 346040264

$89,000

2009 Cas Case e CX210B SN: DAC21K5N7SAH1290

$125,000

2009 Komatsu D65WX D65WX-15E0 X-15E0 SN:69097

$45,500

Deere 544K 2011 John Deere SN: 1DW544KZAB0635796

2013 3 Komatsu WA320-7 WA320-7 SN: 80250

$159,000

2012 Komatsu D61EX-15E0 SN:B46761

-PUHUJL [LYTZ HUK YH[LZ HYL Z\IQLJ[ [V JOHUNL HUK JYLKP[ HWWYV]HS 7YPJPUN ÄUHUJPUN NVVK [OYV\NO 1\S` -PUHUJL [LYTZ HUK YH[LZ HYL Z\IQLJ[ [V JOHUNL HUK JYLKP[ HWWYV]HS 7YPJPUN ÄUHUJPUN NVVK [OYV\NO 1\S`

Soft Ride Solid Tires For Skid Steers and Wheel Loaders Extra deep lugs for traction Tough rubber compounding

Large in stock inventory Backhoe conversions also available

www.advancetires.com • (800) 445-6647 Mention this ad for discounted shipping

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 79

Page 80 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

MODEL

CASE 21F XT 21F Z Bar 121F XT 121F Z Bar 221F Z Bar 221F HS 321F Z Bat 321F HS 521F 521F XT 521F XR 621F* 621F/XT 621F XR 721F 721F/XT 721F XR 821F 821F XR 921F 921F XR 1021F 1021F XR 1121F 1121F XR 1221F 1221F XR

JCB 407 409 411HT 417HT 427HT 427ZX 437HT 437ZX 457HT 457ZX

ENGINE TYPE

ENGINE POWER HP (KW)

Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Case/FPT Cummins Cummins

r KDI 2504 TCR JCB Diesel by Kohle r KDI 2504 TCR hle Ko JCB Diesel by ax om Ec JCB JCB Ecomax Cummins QSB6.7 Cummins QSB6.8 Cummins QSB6.9 Cummins QSB6.10 MTU 6R1000 MTU 6R1001

10,913 (4,950) 11,272 ( 5,112) 11,023 ( 4,999) 11,618 (5,269) 12,547 (5,670) 12,547 (5,670) 13,303 (6,034) 13,303 (6,034) 22,856 (10,366) 24,585 (11,151) 23,229 (10,536) 26,711 (12,116) 27,538 (12,491) 27,073 (12,280) 31,508 (14,291) 32,567 (14,668) 32,064 (14,544) 38,874 (17,633) 39,716 (18,014) 43,777 (19,857) 44,090 (19,998) 53,791 (24,399) 56,633 (25,688) 59,578 (27,024) 61,263 (27,788) 66,800 (30,299) 68,560(31,100)

55 (41) 55 (41) 60 (45) 60 (45) 70 (52) 70 (52) 70 (52) 70 (52) 131 (98) 131 (98) 131 (98) 162 (121) 162 (121) 162 (121) 178 (133) 178 (133) 178 (133) 212 (158) 212 (158) 225 (168) 225 (168) 296 (221) 296 (221) 320 (238 ) 320 (238 ) 370 (276) 370 (276)

11486 (5210) 13296 (6031) 19154 (8,688) 20779 (9,425) 29500 (13381) 30102 (13654) 32565 (14771) 33583 (15233) 44606 (20233) 43129 (19563)

64 (48) 74 (55) 108 (81) 125 (93) 146 (109) 146 (109) 160 (119) 160 (119) 258 (193) 258 (193)

JOHN DEEREYANMAR 4TNV98 204K 244K 304K 324K 344K 444K 524K 544K 624K 644K 644K Hybrid 724K 744K-II 824K-II 844K-II 944K Hybrid

OPERATING WEIGHT LBS. (KG)

YANMAR 4TNV98C YANMAR 4TNV98 YANMAR 4TNC98CT Deere 4045T werTech PSS 4045 Po ere De S 6068 Deere PowerTech PV 068H E6 ch rTe Deere Powe X 6068 Deere PowerTech PV 6090 X Deere PowerTech PS 6090 X PS ch rTe we Po Deere s 6090H Deere PowerTech Plu 6090 S Deere PowerTech PS 6135 S PS ch rTe we Po ere De S 6135 PS ch rTe we Po Deere 35 61 X PS Deere

59 (44) 64 (48) 64 (48) 70 (52) 97 (72.3) 124 (92) 141 (105) 167 (125) 186(139) 232 (173) 232 (173) 264 (197) 303 (226) 333 (248) 377 (281) 536 (400)

11,806 (5,355) 12,060 (5,470) 12,778 (5,796) 14,087 (6,390) 18,761 (8,510) 24,698 (11,203) 27,928 (12,668) 35,008 (15,879) 34,134 (15,483) 41,188 (18,682) 41,188 (18682) 48,988 (22,200) 55,905 (25,358) 59,260 (26,880) 75,413 (34,207) 117,947 (53,500)

MAX DUMP HEIGHT FT. (M)

BUCKET CAPACITY CU. YD. (CU M)

7.6 (2.3) 7.7 (2.4) 7.6 (2.3) 7.8 (2.4) 8 (2.5) 8 (2.5) 8.2 (2.5) 8.2 (2.5) 9.1 (2.8) 8.2 (2.6) 10.3 (3.1) 9.5 (2.9) 8.10 (2.7) 10.9 (3.3) 9.3 (2.8) 9.6 (2.9) 11.0 (3.4) 9.8 (3) 11.2 (3.4) 9.5 (2.9) 11.0 (3.4) 10.1 (3) 12 (3.7) 10.5 (3.2) 11.9 (3.7) 10.3 (3.1) 11.6 (3.6)

1.44 (1.10) 1.44 (1.10) 1.59 (1.22) 1.59 (1.22) 1.73 (1.32) 1.73 (1.32) 1.87 (1.43) 1.87 (1.43) 2.6 (1.99) 4.0 (3.06) 2.6 (1.99) 4.5 (3.44) 4.5 (3.44) 4.5 (3.44) 5.5 (4.21) 5.5 (4.21) 5.5 (4.21) 4.5 (3.44) 4.5 (3.44) 4.8 (3.67) 4.8 (3.67) 5.5 (4.21) 5.5 (4.21) 6.3 (4.61) 6.3 (4.61) 9.2 (7.03) 9.2 (7.03)

1.3 (1.0) 1.6 (1.2) 1.8 (1.4) 2.1 (1.6) 3.1 (2.4) 3.1 (2.4) 3.5 (2.7) 3.5 (2.7) 4.6 (3.5) 4.6 (3.5)

1.0 (0.8) 1.0 (0.8) 1.0 (0.8) 1.4 (1.1) 2.0 (1.5) 2.5 (1.9) 2.75 (2.1) 4.0 (3.1) 3.5 (2.7) 4.0 (3.1) 4.0 (3.1) 5.0 (3.8) 5.25 (4) 6.0 (4.6) 6.3 (4.8) 8.5 (6.5)

8.9 (2.72) 8.8 (2.68) 8.9 (2.72) 8.8 (2.68) 9.4 (2.87) 9.4 (2.87) 9.5 (2.9) 9.3 (2.85) 9.9 (3.02) 9.3 (2.85)

8.0 (2.4) 8.4 (2.5) 8.7 (2.6) 8.9 (2.7) 9.4 (2.9) 8.9 (2.7) 9.1 (2.8) 9.1 (2.8) 9.5 (2.9) 9.5 (2.9) 9.7 (2.9) 9.7 (2.9) 10 (3) 10.6 (3.2) 10.11(3.3) 12.4 (3.8)

EL LOADERS LISTINGS

VISIT WWW.CONSTRU

CTIONEQU

R COMPLETE WHE IPMENTGUIDE.COM FO

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 81

see CHART page 90

ENGINE TYPE

MODEL

CATERPILLAR Cat C4.4 ACERT 910K (LRC) 914K (LRC) 910M 914M 918M 926M 926M High Lift 930M 930M High Lift 938M 938M High Lift 950M 950M High Lift 962M 962M High Lift 966M 966M High Lift 966M XE 966M XE High Lift 972M 972M High Lift 972M XE 972M XE High Lift 980M 980M High Lift 986H 986H High Lift 982M 988K 988K High Lift 990K 990K High Lift 992K 992K High Lift 993K 993K High Lift 994K 994K High Lift

Cat C4.4 ACERT Cat C4.4 ACERT Cat C4.4 ACERT Cat C4.4 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C7.1 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C9.3 ACERT Cat C13 ACERT Cat C13 ACERT Cat C15 ACERT Cat C15 ACERT Cat C13 ACERT Cat C18 ACERT Cat C18 ACERT Cat C27 ACERT Cat C27 ACERT Cat C32 ACERT Cat C32 ACERT Cat C32 ACERT Cat C32 ACERT Cat 3516E Cat 3516E

NEW HOLLAND FPT W50C TC W50C ZB W80C W80C HS

TAKEUCHI TW40 TW65 SERIES 2 TW80 SERIES 2

TEREX TL65 TL80 TL100 TL120 TL160 TL210 TL260 TL310

FPT FPT FPT

Perkins / 403D-15T Deutz / TD2.9L T Deutz / TD2.9L T

ENGINE POWER HP (KW)

OPERATING WEIGHT LBS. (KG)

92 (69) 92 (69) 92 (69) 92 (69) 112 (84) 153 (114) 153 (114) 164 (122) 164 (122) 188 (140) 188 (140) 230 (172) 230 (172) 250 (186) 250 (186) 276 (206) 298 (222) 298 (222) 298 (222) 299 (223) 299 (223) 312 (233) 312 (233) 386 (288) 386 (288) 409 (305) 409 (305) 398 (297) 541 (403) 541 (403) 699 (521) 699 (521) 814 (307) 814 (307) 1,024 (764) 1,024 (764) 1,739 (1,297) 1,739 (1,297)

17,838 (8,091) 19,262 (8,737) 17,838 (8,091) 19,262 (8,737) 20,869 (9,466) 28,770 (13,050) 28,612 (12,978) 30,879 (14,006) 30,553 (13,859) 36,216 (16,427) 35,052 (15,899) 42,357 (19,213) 43,674 (19,810) 44,712 (20,281) 45,884 (20,813) 51,176 (23,213) 54,729 (24,825) 51,176 (23,213) 54,729 (24,825) 54,871 (24,889) 55,057 (24,973) 54,871 (24,889) 55,057 (24,973) 66,337 (30,090) 66,571 (30,196) 93,090 (42,225) 94,677 (42,945) 78,402 (35,563) 112,574 (51,063) 114,359 (51,872) 178,517 (80,974) 188,713 (85,599) 220,089 (99,831) 221,713 (100,567) 292,748 (132,788) 294,878 (133,754) 529,149 (240,018) 530,428 (240,598)

10,913 11,111 13,184 13,184

55 (41) 55 (41) 70 (52) 70 (52)

39.4 (29.4) 73 (54) 73 (54)

7,275 (3,300) 11,354 (5,150) 12,700 (5,760)

Deutz Deutz Deutz Deutz Perkins Cummins Perkins Cummins

50 (36.4) 61 (45) 75 (56) 101 (74.4) 101 (74.5) 162 (119) 174 (128) 200 (149)

9,040 (4,100) 10,800 (4,900) 12,787 (5,800) 15,432 (7,000) 20,280 (9,200) 27,560 (12,500) 31,750 (14,400) 38,800 (17,600)

1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 1.7 - 2.5 (1.3 - 1.9) 2.5 - 5.0 (1.9 - 3.8) 2.5 - 5.0 (1.9 - 3.8) 2.7 - 5.5 (2.1 - 4.2) 2.7 - 5.5 (2.1 - 4.2) 3.3 - 6.5 (2.5 - 5.0) 3.3 - 6.5 (2.5 - 5.0) ) 3.3 - 12.0 (2.5 - 9.2 ) 3.3 - 12.0 (2.5 - 9.2 ) 9.2 5 (2. .0 12 3.3 ) 3.3 - 12.0 (2.5 - 9.2 ) 3.3 - 12.0 (2.5 - 9.2 ) 3.3 - 12.0 (2.5 - 9.2 ) 9.2 5 (2. .0 12 3.3 ) 3.3 - 12.0 (2.5 - 9.2 ) 3.8 - 13.0 (2.9 - 9.9 ) 3.8 - 13.0 (2.9 - 9.9 ) 9.9 9 (2. .0 13 3.8 ) 3.8 - 13.0 (2.9 - 9.9 .2) 5.3 - 16.0 (4.1 - 12 .2) 5.3 - 16.0 (4.1 - 12 ) 7.6 4 (5. .0 10 7.0 ) 7.0 - 10.0 (5.4 - 7.6 .1) 6.0 - 15.8 (4.6 - 12 ) 8.3 - 10.0 (6.3 - 7.6 ) 7.6 3 (6. .0 10 8.3 ) 9.9 6 (8. .0 13 11.3 ) 11.3 - 13.0 (8.6 - 9.9 12.2) 14.0 - 16.0 (10.7 12.2) 14.0 - 16.0 (10.7 23.7) .2 (12 .0 16.0 - 31 23.7) 16.0 - 31.0 (12.2 24.5) 25.0 - 32.0 (19.1 24.5) .1 (19 .0 32 .0 25

1.0 (.76) 1.0 (.76) 1.4 (1.1) 1.4 (1.1)

0.66 (.5) 1.05 (.8) 1.3 (1)

) 0.65 to 1.3 (0.5 to 1.0 ) 1.0 to 1.6 (0.8 to 1.2 5) 1.5 0 (1. 3 2.0 1.31 1.8) 1.57 to 2.35 (1.2 to ) 2.0 to 3.4 (1.5 to 2.6 ) 2.6 to 4.6 (2.0 to 3.5 ) 3.3 to 5.9 (2.5 to 4.5 ) 3.9 to 8.5 (3 to 6.5

2.7 (0.8) 2.8 (0.9) 2.7 (0.8) 2.8 (0.9) 3.0 (0.9) 3.3 (1.0) 4.0 (1.2) 3.3 (1.0) 4.4 (1.3) 3.6 (1.1) 4.5 (1.4) 4.7 (1.4) 4.8 (1.5) 4.7 (1.4) 4.8 (1.5) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.4 (1.3) 4.8 (1.5) 4.8 (1.5) 6.6 (2.0) 6.2 (1.9) 5.1 (1.6) 6.8 (2.1) 7.0 (2.1) 7.2 (2.2) 8.5 (2.6) 7.8 (2.4) 7.3 (2.2) 8.5 (2.6) 8.9 (2.7) 9.3 (2.8) 8.8 (2.7)

7.8 (2.4) 8 (2.4) 8.9 (2.7) 8.9 (2.7)

7.06 (2,150) 8.1 (2,465) 8.6 (2,605)

8.2 (2.52) 8.3 (2.55) 8.6 (2.64) 9 (2.75) 9.6 (2.93) 9.11 (3.01) 9.3 (2.85) 10.1 (3.07)

EL LOADERS LISTINGS

R COMPLETE WHE IPMENTGUIDE.COM FO

CTIONEQU

VISIT WWW.CONSTRU

MAX DUMP HEIGHT FT. (M)

BUCKET CAPACITY CU. YD. (CU M)

Page 82 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

EXPERIENCE EX PERIENCE T THE HE D DIFFERENCE IFFERENCE Takeuchi offers Takeuchi offers the the m most ost iinnovative nnovative a and nd a advanced dvanced li line ne o off c compact ompac t e equipment q u i p m e nt o on n tthe he p planet. lanet. C Come ome a and nd ssee ee w what hat e everyone veryone e else lse iiss ttalking alking a about. bout. E Experience xperience T Ta Takeuchi akeuchi — Visit V isit your your local local dealer dealer ttoday. oday.

Alta Equipment Company

McCann Industries 543 S. Rohlwing Rd • Addison, IL 60101 630-627-0000 250 E. North Frontage Rd. • Bolingbrook, IL 60440 630-739-7770 2350 S. Laflin St. • Chicago, IL 60608 312-942-9200 4701 West 137th Street • Crestwood, IL 60445 708-597-3110 1133 Indianapolis Blvd. • Schererville, IN 46375 219-865-6545 1360 N. Rand Rd. • Wauconda, IL 60084 847-526-9444 4102 W. Crystal Lake Rd. • McHenry, IL 60050 815-385-0420 www.McCannOnline.com

Brandeis Machinery & Supply Company 17000 Highway 41 N Evansville, IN 47725 812-425-4491 7310 Venture Lane Fort Wayne, IN 46818 260-489-4551 8410 Zionsville Road Indianapolis, IN 46268-1524 317-872-8410 1801 Watterson Trail Louisville, KY 40299 502-491-4000 www.brandeismachinery.com

Diamond Equipment Inc. 1060 Diamond Avenue • Evansville, IN 47711 800-258-4428 • 812-425-4428 • Fax: 812-421-1036 1046 Lovers Lane • Bowling Green, KY 42103 800-489-1061 • 270-781-1061 • Fax: 270-781-0907 17035 North IL Hwy 37 • Mt. Vernon, IL 62864 800-388-6396 • 618-242-2273 • Fax: 618-242-9161 2000 Harlan Drive • Terre Haute, IN 47802 888-343-4747 • 812-299-4747 • Fax: 812-299-3687 www.diamondequipment.com

Bobcat of St. Louis 401 West Outer Rd. Valley Park, MO 63088 636-225-2900 Fax: 636-225-4344 1885 West Terra Lane • O’Fallon, MO 636-240-9020 1101 N. Lenway Dr. • Columbia, MO 573-886-9435 9801 West State Route 161 Fairview Heights, IL 618-397-1847 www.bobcatofstl.com

Victor L. Phillips Co. 4100 Gardner Ave. • Kansas City, MO 64120 800-878-9290 5430 S. Highway 43 • Joplin, MO 64804 800-878-8223 6330 W. Hwy 60 • Brookline Station, MO 65619 800-955-2729 3250 North Hydraulic • Wichita, KS 67219 800-878-3346 1305 SW 42 St. • Topeka, KS 66609 800-878-4345 2203 West Jones Ave. • Garden City, KS 67846 800-511-1435 www.vlpco.com

28775 Beck Rd. • Wixom, MI 48393 248-449-6700 2470 W. Columbia Ave. • Battle Creek, MI 49015 269-965-1269 8840 Byron Commerce SW • Byron Center, MI 49315 616-878-7450 4716 Talon Ct. S.E. • Kentwood, MI 49512 616-698-2960 6327 Jomar Ct. • Lansing, MI 48917 517-272-5033 5920 Grand Haven Rd. • Muskegon, MI 49441 231-798-8754 56195 Pontiac Trail • New Hudson, MI 48165 248-356-5200 28855 Smith Rd. • Romulus, MI 48174 734-641-8238 1524 Champagne Dr. • Saginaw, MI 48604 989-752-9400 7500 E. 15 Mile Rd. • Sterling Hts., MI 48312 586-977-6000 476 US 31 South • Traverse, MI 49685 231-943-3700 9433 Riley St. • Zeeland, MI 49464 616-748-4108 www.altaequipment.com

Columbus Equipment Company 2329 Performance Way • Columbus, OH 43207 614-443-6541 12500 Williams Rd. • Perrysburg, OH 43551 419-872-7101 712 Shepherd Ave. • Cincinnati, OH 45215 513-771-3922 3942 Brecksville Rd. • Richfield, OH 44286 330-659-6681 290 Old Steubenville Pike • Cadiz, OH 43907 740-942-8871 7570 New Carlisle Pike • Dayton, OH 45424 937-879-3154 2200 Venture Circle SE • Massillon, OH 44646 330-833-2420 818 Lee St. • Zanesville, OH 43701 740-455-4036 864 Richmond Rd. • Painesville, OH 44077 440-352-0452 3668 US Route 23 South • Piketon, OH 45661 740-289-3757 www.columbusequipment.com

Midwest Underground Supply Road Builders Machinery and Supply Co., Inc. 4115 S. 90th St. • Omaha, NE 68127 402-331-9200 Fax: 402-339-6620 5601 Fletcher Ave. • Lincoln, NE 68507 402-325-0447 Fax: 402-325-0753 4949 Juergen Rd. • Grand Island, NE 68801 308-384-2620 Fax: 308-384-0686 www.roadbuildersmachinery.com

1106 32nd St. SW Bondurant, IA 50035 877-967-5656 27285 Ironworks Ave. Harrisburg, SD 57032 605-368-9880 www.midwestundergroundsupply.com

Kelbe Brothers Equipment Co. 12770 W. Silver Spring Drive • Butler, WI 53007 262-781-4970 • Fax: 262-781-9671 4621 Dutch Mill Rd. • Madison, WI 53716 608-221-8300 3101 French Rd. • De Pere, WI 54115 920-343-6496 www.kelbebros.com

FIND F IND O OUT UT W WHAT H AT O OTHERS TH ERS K KNOW. N OW. V VISIT I S IT T TAKEUCHI-US.COM AKEUCHI - US .COM TO TO FIND F I N D THE T H E DEALER D E A L E R NEAREST N E A R E S T YOU. YO U .

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 83

Pros P Pr ros r os Know! Kno K no ow! w!

Those in the know, know Takeuchi

Tough, Powerful, Dependable

Star Equipment Ltd. 1401 2nd Avenue • Des Moines, IA 50314 515-283-2215 • 800-369-2215 Fax 515-283-0295 2625 W. Airline Hwy. • Waterloo, IA 50703 319-236-6830 • 800-791-9249 Fax 319-236-6834 2950 6th Street SW • Cedar Rapids, IA 52404 319-365-5139 • 800-728-5139 Fax 319-365-6726 2100 E. Lincoln Way • Ames, IA 50010 515-233-9500 • 866-856-2312 Fax: 515-233-9505 www.starequip.com

Luby Equipment Services

Wilson Equipment Company

2300 Cassens Drive • Fenton, MO 63026 636-343-9970 199 Airport Road • Cape Girardeau, MO 63702 573-334-9937 8853 Petroff Drive • Caseyville, IL 62232 618-397-9971 4375 Camp Butler Road Springfield, IL 62707 217-744-2233 2625 North 24th St. • Quincy, IL 62305 217-222-5454 www.lubyequipment.com

2180 Old Frankfort Pike • Lexington, KY 40510 859-254-6443 800-432-0913 Fax: 859-254-9099 828 W. Cumberland Gap Pkwy • Corbin, KY 40701 606-528-0700 800-274-9457 Fax: 606-528-2329 2124 Watergap Road • Prestonsburg, KY 41653 606-874-8036 • 800-955-9457 Fax: 606-874-0013 www.wilsonequipment.com

< Find out what others know, visit takeuchi-us.com for more info >

Page 84 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Modern Wheel Loaders Help Solve Age-Old Problem The age-old problem of moving large quantities of material from one place to another had plagued those in the construction industry for centuries. Enter the modern wheel loader — the industry’s most versatile workhorse. Its applications include material handling, site prep and road projects, among many others. Looking back, it’s difficult to imagine how those in the industry managed without them. Thankfully, today’s contractors have several manufacturers, sizes and add-ons to choose from, all to make their work a whole lot easier. And it all started with the advent of new farm tractors, diesel engines and bucket attachments. There were several early prototypes of the wheel loader in the 1920s, which were essentially agricultural tractors. These machines included a loader bucket, which was fastened on with wire rope through a clutch-operated winch, and then dumped by gravity

growth for Caterpillar. In 1960, Caterpillar Tractor launched its 2.75 cu. yd. (2.1 cu m) 966 model series with rigid frame. In 1963, it introduced its first articulated wheel loader the Cat 988 with 6 cu. yd. (4.5 cu m) capacity and implemented articulated steering in the 966 series with the 966B. International Harvester Hough Division entered the market in 1964 with the HD 400, which was its first articulated wheel loader. In 1965 Komatsu began production of its line of wheel loaders. In the 1970s, larger wheel loaders with articulated steering, a new type of lift arm system and comfortable cabs were available from Volvo. Other manufacturers also increased their bucket’s capacities to 20 cu. yds. (15.3 cu m), including Caterpillar, Komatsu and LeTourneau. JCB launched We Build Georgia photo its 400 series wheel loaders The 1960s was a decade of rapid in 1973. growth for Caterpillar. Later, in 1986, Kawasaki Heavy Industries Ltd set the bar loader with an attachment bracket. high by developing the largest Volvo acquired AB Bolinder- wheel loader with a 25 cu. yd. (19 Munktell, and through this partner- cu m), for Japan’s Surface Mining ship BM Volvo developed the first Equipment for Coal Technology diesel engine tractor in 1952. In Research Association. 1954, Volvo adapted the engine as Today, wheel loaders are well as transmission components advanced, diverse and versatile. and a new range of tractors to cre- New electrical wheel loaders work ate the world’s first wheel loader much the same way as their diesel with attachment bracket, the H-10. and gasoline-powered counterparts It was a rear-wheel steer machine do. Attachment options such as based on a reversed tractor, pow- forks, grapples and various bucket ered by a three-cylinder diesel options mean that these machines engine with an output of 35 hp and work for any number of applicaa five-speed mechanical gearbox, tions. Hybrid models also have according to the manufacturer. become popular due to new legisThe following decade, manufac- lation and cost savings for contracturers were focused on the strength tors. As wheel loader models conand productivity of the wheel tinue to advance, contractors will loader, and other manufacturers continue to use them as the workwere making their own marks on horses of their fleets. the industry. During the 1960s, (This story also can be found manufacturers aimed to increase on Construction Equipment Earthmovers Magazine photo the payloads and size of their Guide’s website at www.constructionequipmentguide.com.) This is the JCB 413, the smallest machine in the 400 range, which featured four wheel drive and an machines. articulated frame. The 1960s was a decade of rapid CEG through a trip release mechanism. E. Boydell & Co., in Manchester, England, developed small wheel loaders in the 1930s by fastening buckets onto tractors, and invented the first bucket-mounted tractor by mounting a Muir-Hill loader cablecontrolled bucket on a 28 horsepower Fordson tractor. Following these prototypes, there were several advances in wheel loader design, including rigid frame wheel loaders and later, articulated wheel loaders. Frank G. Hough developed the first self-contained, rigid frame, two-wheel drive, rubber-tired loader called the Hough Model HS in 1939. This design included a .33 cubic yard (.25 cu m) gravity-powered bucket. The rigid frame loader design had several flaws, including lack of maneuverability. Improvements to this design led to the articulated wheel loader. World War II resulted in a

surge of technology across multiple sectors, including construction equipment. In 1953, Mixermobile Manufacturers in Portland, Ore., introduced the articulated frame — the Scoopmobile Model LD-5.

This advancement gave the operator more control and maneuverability of not only the wheel loader, but the bucket as well. The following year, the diesel engine tractor and a timely merger resulted in the first modern wheel

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 85

Contact your local dealer:

Battle Creek, MI Byron Center, MI Kentwood, MI Lansing, MI Muskegon, MI New Hudson, MI Romulus, MI Saginaw, MI Sterling Hts, MI Traverse, MI Wixom, MI Wixom, MI (Cons. Division) Zeeland, MI

269.965.1269 616.878.7450 616.698.2960 517.272.5033 231.798.8754 248.356.5200 734.641.8238 989.752.9400 586.977.6000 231.943.3700 248.449.6700 248.356.5200 616.748.4108

McALLISTER EQUIPMENT CO. Alsip, IL East Peoria, IL Rockford, IL Springfield, IL Villa Park, IL

708.389.7700 309.694.4455 815.227.0555 217.789.0351 630.530.7600

Burnsville, MN Proctor, MN Eau Claire, WI Mankato, MN Rochester, MN Roseville, MN Sauk Rapids, MN

800.552.1189 800.835.MACK 800.494.MACK 800.862.MACK 800.562.1505 800.704.0935 888.310.MACK

Evansville, IN Fort Wayne, IN Indianapolis, IN Corbin, KY Louisville, KY Prestonsburg, KY St. Louis, MO Cincinnati, OH Columbus, OH COMING SOON Cleveland, OH

812.867.6661 260.482.3681 317.247.9125 606.528.9440 502.456.4050 606.874.2104 314.487.8925 513.321.7833 614.636.4050

Butler, WI DeForest, WI DePere, WI Eau Claire, WI

262.781.3770 608.846.9600 920.336.3601 715.835.6133

216.393.7833

Some companies have you choose power or fuel efficiency. You chose both.

Page 86 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

John Deere 944K Proves Efficient Equipment Solution for Quarries The John Deere 944K hybrid wheel loader is bolstering bottom lines by offering maximized productivity and efficiency through its hybrid-electric drive system designed to lower daily operating costs. Coupled with a 536 hp, PowerTech EPA Interim Tier IV engine (IT4), the 944K hybrid wheel loader can provide significant fuel savings over 9-cu. yd. (6.9 cu m) loaders with conventional drivetrains. The production-class wheel loader’s brushless AC generators and motors, water-cooled brake resistors and solid-state power electronics deliver reliable, long-term performance to quarry and large-load applications, according to the manufacturer. “Today’s wheel loaders demand increased uptime and reliability, and our customers asked for a solution that offers much more,” said John Chesterman, product marketing manager, production class four-wheel drive loaders, John Deere Construction & Forestry. “The highly fuel-efficient 944K hybrid wheel loader delivers quick, smooth and responsive hydraulics, and four modular, independent wheel drives with electronic traction control that provide customers with a complete loader solution built to last through the most rugged conditions.” The 944K’s hybrid-electric drive recaptures energy while slowing the loader when the operator lets off the accelerator, lessening the load on the engine and further reducing fuel consumption. During operation, the engine can run in a limited speed range of 1,200 to 1,800 rpm for maximum fuel efficiency in normal mode or can run at constant speed so boom and bucket functions are powerful, responsive and quick in performance mode. Offering strong pushing power and quick ramp-climbing ability, the 944K hybrid wheel loader helps operators maintain stockpiles and heap hoppers in quarry operations and other production facilities through its bucket width of 12 ft. (3.6 m) and breakout force of 103,388 lbs. No transmission shifting or clutches to engage enable smooth reversals and less spillage. The 944K hybrid wheel loader offers standard traction control that automatically limits torque to any wheel when slippage occurs, increasing machine traction in poor underfoot

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 517/321-4191 Fax

BRANDEIS MACHINERY & SUPPLY COMPANY

The 944K’s hybrid-electric drive recaptures energy while slowing the loader when the operator lets off the accelerator, lessening the load on the engine and further reducing fuel consumption.

conditions. With enhanced rimpull control, the loader prevents tire spin and slicing. The 944K also offers coast control to reduce service-brake wear and features such functions as dynamic braking in a hydrostatic transmission, slowing the loader and helping reduce service-brake component wear. Inside the cab, the loader is quieter than other machines on the market. At only 108 decibels, noise is much less noticeable to bystanders, and cab noise is only 72 decibels for the operator. With the largest loader cab offered by Deere, the 944K offers a commanding view to the bucket, tires and ground hazards through floor-to-ceiling front glass. The machine’s joystick steering delivers smooth, low-effort control for fatigue-beating comfort, according to the manufacturer. “We brought in the 944K hybrid wheel loader to our remote quarry location, and, so far, the uptime has been great,” said Jeff Bremer, MBA, area equipment manager, Cornejo & Sons. “One of the most exciting things about

deploying the 944K is the fuel savings. With the 944K, we’re able to reach the same production as our old machine, and we achieve the same efficiency with less fuel burn, so it actually costs us less. We have really high expectations for our equipment, and John Deere has met our expectations.” Customers looking to get the most out of their 944K hybrid wheel loader can rely on their John Deere dealers to provide Ultimate Uptime featuring John Deere WorkSight. With Ultimate Uptime, owners receive pre-delivery and follow-up inspections; five years of JDLink Ultimate telematics, machine health prognostics and remote diagnostics, and programming capability; and the ability to add dealer-provided uptime solutions to customize the package to individual needs. For more information, visit www.JohnDeere.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 87

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898

GENERAL EQUIPMENT & SUPPLIES

MY CUSTOMERS LOVE KOMATSU!

www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

SUPPORTED WITH PRIDE

Page 88 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Liebherr XPower Wheel Loaders Represent Milestone The latest XPower large wheel loaders with emission Stage IV / Tier 4f represent a milestone in the technological history of Liebherr wheel loaders. Due to the wide range of innovations, such as the power-split driveline installed as standard, Liebherr has subjected its new wheel loader generation to much tougher, more thorough and more extensive testing than ever before. Important main components, such as the XPower driveline and the larger axles, were found to be particularly durable in testing over 70,000 operating hours. The load program in the test phases included traditional back loading as well as customer-specific special operations. Liebherr deployed the XPower test wheel loaders in various quarries, recycling businesses and sawmills. The machines also have been involved in loading slag in a steel plant and coal in a harbor. The positive test results demonstrate that the efforts made by Liebherr to combine fuel efficiency, high performance, durability and comfort in a single wheel loader have achieved their goal over the long term, according to the manufacturer. Unique Efficiency Due to Power-Split XPower Driveline Liebherr is installing the powersplit XPower driveline as standard in its large wheel loader series. This ensures power and efficiency in the new Liebherr large wheel loaders. The XPower power-split transmission performs the same function as the traditional powersplit transmission but with a greater level of efficiency. It combines two types of drive: the hydrostatic drive, the most efficient drive in short loading cycles, and the mechanical drive for long distances and driving up gradients. The power-split transmission manages the interaction of the two drive types. It is adjustable and continuously adapts the mixing ratio of the two drive paths without noticeable switching and without interrupting traction power. In this way the power of the wheel loader adapts to the specific requirements of the particular task. A greater hydrostatic element comes into effect during starting and loading and a greater mechanical element

where Liebherr customers benefit from the power deployment provided by the interaction of the mechanical and hydrostatic drive paths in the new XPower driveline. The load is divided across the two drive paths and the components have a significantly longer life as a result. Machine operators can work more efficiently and safely with minimal downtime.

The maneuverable and dynamic Liebherr L 556 XPower wheel loader with industrial lift arms and high-dump bucket in test operation at a recycling business.

is applied when travelling at higher speeds. Together, the two paths always transfer 100 percent of the diesel engine power and only the mix ratio of the two paths changes. With its innovative and efficient drive concepts, Liebherr has achieved a high level of efficiency in all areas where wheel loaders are used. The Liebherr-PowerEfficiency system (LPE) plays a key role in this. Over a test and development phase lasting several years, Liebherr worked continually to perfect the adaptation of all drive-train components. The result is that XPower wheel loaders reduce fuel consumption by up to 30 percent enabling operators to reduce their operating costs, according to the manufacturer. High Fuel Efficiency Rehandling a wide range of materials is one of the basic tasks for a wheel loader. This is why Liebherr-Werk Bischofshofen GmbH tested several machines in rehandling tasks. For example, a gravel and crushed stone plant tested an L 580 XPower with Z-bar linkage and 7.4 cu yd. (5.7 cu m) bucket. The wet raw material, which the company extracts from a lake using a bucket chain, proved to be a particular challenge. With the strengthened Z lift arms providing up to 20 percent more break-out force, the machine operators lifted the wet material

without a problem, and the optimized bucket design offered improved penetration action for the task. The responsiveness of the XPower driveline was impressive when the loading route had an uphill gradient. The machine operator praised the quiet, comfortable handling and the agility of the wheel loader. At approximately 4 gal. (15 L) of diesel per operating hour, the L 580 XPower consumes around 1.3 gal. less than another machine undertaking similar activities in the gravel and crushed stone plant, according to the manufacturer. An L 566 XPower loaded approximately 1,653 ton (1,500 t) of bulk material in a building materials recycling park. The wheel loader coped with the distances across the large site, which were generally much greater. In doing so, the wheel loader consumed between 3.7 and 4.7 gal. (14 and 18 L) of diesel. The machine operator was pleased with the level of performance and the comfort. As a senior employee at the recycling park commented, “The thrust force and acceleration of the L 566 XPower are excellent. The machine is very responsive, but still runs quietly. The large cab is particularly comfortable. The driver’s seat is great. I can adjust the steering wheel in three ways and the control elements are arranged so that all the information is avail-

able at a glance.” L 586 XPower Takes Part in an Extended Term Over 13,700 Operating Hours The new large wheel loaders have proved their stability during intensive long-term testing. An L 586 XPower with Z-bar linkage was the front-runner in the endurance test, reliably performing its task of transporting wood chips into a silo for 13,700 operating hours. An L 586 XPower was selected because the thrust force and break-out force — the key requirements for this specific task — were ideally suited, in proportion to the operating weight, to the site requirements. The L 586 XPower also had a 18 cu. yd. (14.0 cu m) light material bucket, which the machine operator was able to use on each cycle to move large volumes of wood chips. The machine was operating almost constantly under a full load. Despite this, fuel consumption remained low due to the powersplit XPower driveline. The test wheel loader required 5.3 gal. (20 L) of diesel per operating hour for the power-intensive task. This equates to a fuel saving of around 30 percent when compared with the already very economical Stage IIIA / Tier III L 586 wheel loader normally used to transport the wood chips. Operations under a full load are

Full Power at the Quarry Face: Quarry Test for the L 586 XPower An L 586 XPower, fitted with a 7.2 cu. yd. (5.5 cu m) rock bucket with Liebherr tooth system, was tested in the quarrying industry by an international cement manufacturer that used it for extraction. Other standard quarrying equipment options, such as a foldable grill for the windscreen, were included on the machine to prepare it for its work at the rock face. The challenging test operation featured routes of up to 1,312 ft. (400 m) and inclines of up to 30 percent. The benefits of the power-split driveline really came into effect under these conditions. The combination of the hydrostatic and mechanical drive ensures that the wheel loader works efficiently on all operations, even on long routes and up hills. The L 586 XPower proved this to be the case in this special quarrying task. Despite the enormous load, the test loader only used around 5.8 gal. (22 L) of diesel per operating hour. The Toughest Conditions: Robust XPower Wheel Loaders Working With Steel and Coal An L 586 XPower fitted with a 5.9 cu. yd. (4.5 cu m) high-dump bucket, comprehensively reinforced tires and tire chains completed a tough test operation. The wheel loader took on the task of removing solidified steel slag at a steel plant. The L 586 XPower broke into the heavy, bulky and dusty metal slag with full power. The heavy tire chains, which weighed over 3.8 ton (3.5 t), provided the necessary traction. Under this extreme load, the robust axles and the powerful Z lift arm were found to be very durable. The L 586 XPower was in operation for a see LIEBHERR page 92

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 89

CASE AUTHORIZED DEALERS Illinois BIRKEY’S Bloomington Galesburg Mattoon Urbana

LOW TCO AND HIGH ROI ROLLED INTO ONE IMPRESSIVE MACHINE.

Michigan (309) 827-0520 (309) 341-4360 (217) 235-3158 (217) 337-1781

SOUTHEASTERN EQUIPMENT Holt (517) 694-0471 Novi (248) 349-9922

DIAMOND EQUIPMENT Mt. Vernon (618) 242-2273

Missouri

LUBY EQUIPMENT SERVICES Caseyville (618) 397-9971 Quincy (217) 222-5454 Springfield (217) 744-2233 MCCANN INDUSTRIES Addison (630) 627-0000 Bolingbrook (630) 739-7770 McHenry (815) 385-0420 Wauconda (847) 526-9444

Indiana DIAMOND EQUIPMENT Evansville (812) 425-4428 Terre Haute (812) 299-4747

POTTER EQUIPMENT Springfield (417) 862-9275 VICTOR L. PHILLIPS Joplin (417) 781-8222 Kansas City (816) 241-9290

Nebraska

MCCANN INDUSTRIES Schererville (219) 865-6545

North Dakota

RPM MACHINERY Fort Wayne (260) 747-1561 Indianapolis (317) 856-3000 Lafayette (765) 742-2080 South Bend (574) 271-0800

TITAN MACHINERY Bismarck (701) 250-7925 Dickinson (701) 227-5309 Fargo (701) 237-3333 Grand Forks (701) 775-8111 Minot (701) 852-3188 Williston (701) 577-0024

Ohio

VICTOR L. PHILLIPS Garden City (620) 275-1996 Topeka (785) 267-4345 Wichita (316) 838-3346

SOUTHEASTERN EQUIPMENT Brilliant (740) 598-3400 Brunswick (330) 225-6511 Cambridge (740) 432-6303 Dublin (614) 889-1073 Gallipolis (740) 446-3910 Heath (740) 522-3500 Mansfield (419) 529-4848 Marietta (740) 374-7479 Mentor (440) 255-6300 Monroe (513) 539-9214 North Canton (330) 494-3950 Perrysburg (419) 874-0331

Kentucky

South Dakota

Kansas COLEMAN EQUIPMENT Bonner Springs (913) 422-3040

DIAMOND EQUIPMENT Bowling Green (270) 781-1061 MCKEEL EQUIPMENT Murray (270) 753-3062 Paducah (270) 444-0110

TITAN MACHINERY Aberdeen (605) 225-0505 Pierre (605) 224-9247 Rapid City (605) 388-0266 Sioux Falls (605) 336-3434

SOUTHEASTERN EQUIPMENT Burlington (859) 586-6133

Wisconsin

STATE EQUIPMENT Ashland (606) 928-5644 WILSON EQUIPMENT COMPANY Corbin (606) 528-0700 Elizabethtown (270) 360-8326 Lexington (859) 254-6443 Louisville (502) 589-9901 Prestonsburg (606) 874-8036

Minnesota

WHEN YOU PURCHASE ANY CASE N SERIES BACKHOE LOADER

LUBY EQUIPMENT SERVICES Cape Girardeau (573) 334-9937 Fenton (636) 343-9970 O’Fallon (636) 332-9970

HOPF EQUIPMENT Huntingburg (812) 683-2763

TITAN MACHINERY Center Point (319) 849-3889 Davenport (563) 386-0400 Des Moines (515) 974-5100 Sioux City (712) 239-4941

3-YR/3000-HR PROTECTION PLAN*

CROWN POWER & EQUIPMENT Columbia (573) 443-4541 Eldon (573) 392-0230 Jefferson City (573) 636-5281

TITAN MACHINERY Lincoln (402) 464-3711 North Platte (308) 532-6571 Omaha (402) 733-3700

Iowa

LIMITED TIME ONLY!

RPM MACHINERY Dorr (616) 371-7250

BURRIS EQUIPMENT Ingleside (815) 363-4100 Waukegan (847) 336-1205

MILLER-BRADFORD & RISBERG Rockford (815) 397-6200

Based on actual sales data from the past five years, EquipmentWatch has awarded the CASE 580 Series backhoes the first-ever Highest Retained Value Award. That’s high praise for the quality, performance and longevity of an iconic line that also delivers best breakout force, highest lifting capacity, fastest roading speeds and one of the industry’s quietest cabs. So dig deeper, reach further, load faster—and get more at resale with CASE.

MILLER-BRADFORD & RISBERG Negaunee (906) 475-4181

TITAN MACHINERY Crookston (218) 281-4668 Hermantown (218) 727-3038 Marshall (507) 532-5783 Rogers (763) 428-5099 Shakopee (952) 445-5400

MILLER-BRADFORD & RISBERG DeForest (608) 222-9191 De Pere (920) 338-5800 Eau Claire (715) 832-3443 Marathon (715) 443-6600 Sussex (262) 246-5700 SERVICE MOTOR COMPANY Dale (920) 779-4311 Fond Du Lac (920) 923-1768 New Franken (920) 468-7700 TITAN MACHINERY La Crosse (608) 788-1025

*CASE Premier Protection Plan limited to 3 years or 3,000 total engine hours, with total coverage including manufacturer’s base warranty of 12 months. Premier coverage with a $0 deductible applies in months 13 through 36 or 3,000 total engine hours, whichever occurs first. Eligible equipment includes all new CASE Backhoe Loaders (580N EP, 580N, 580SN, 580SN WT, 590SN). This literature is descriptive only. The precise protection afforded is subject to the terms, conditions and exclusions of the contract as issued. Program participation is subject to underwriting requirements. Programs may be changed or canceled without notice. All insurance products offered through CNH Industrial Insurance Agency Inc. are underwritten by licensed insurance companies. Capitalized terms used in this literature, unless defined herein, have the meanings assigned to them in the contract as issued. ©2016 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Insurance Agency Inc. is an AmTrust Financial company. The CNH Industrial Insurance logo and “CNH Industrial” name are licensed or sublicensed by CNH Industrial N.V. to AmTrust North America, Inc. for use in its insurance agency business. Any trademarks referred to herein, in association with goods and/or services of companies, other than owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates, are the property of those respective companies.

Page 90 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

CHART from page 81

MODEL

ENGINE TYPE

CORE DOOSAN INFRA ns DL200-5 DL220-5 DL250-5 DL300-5 DL350-5 DL420-5 DL450-5 DL550-5 DL200TC-5 DL250TC-5 DL200HL-5 DL220HL-5 DL250HL-5 DL300HL-5 DL350HL-5 DL420HL-5 DL450HL-5 DL550HL-5

HYUNDAI HL730-9 HL730-9A HL740-9 HL740-9A HL757-9 HL757-9A HL760-9 HL760-9A HL760-9A WH HL770-9 HL770-9A HL780-9 HL780-9A

Perki Doosan Doosan Scania Scania Scania Scania Scania Perkins Doosan Perkins Doosan Doosan Scania Scania Scania Scania Scania

Cummins QSB4.5 Cummins QSB4.5 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSL Cummins QSL9 Cummins QSM11 Cummins QSX11.9

KAWASAKI-KKuCboM ta V2403-MDI 42ZV-2 45ZV-2 135ZV-2 60Z7 62Z7 67Z7 67TM7 70Z7 70TM7 80Z7 80Z7 T4F 85Z7 90Z7 T4F 95Z7 95Z7XT 115Z7 115Z7XT

I Kubota V3307-DI-T Cummins QST30 Deutz TCD36 Isuzu 4HK1 Isuzu 4HK1 Isuzu 4HK1 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSL9 Isuzu 6HK1 Cummins QSL9 Isuzu 6WG1 Isuzu 6WG1 Isuzu 6WG1 Isuzu 6WG1

OPERATING WEIGHT LBS. (KG)

ENGINE POWER HP (KW) TC: tool carrier

HL: high lift

mpliant. chines are Tier 4 co Note: All "dash-5" ma (2.89)

25,794 (11,700) 27,381 (12,419) 30,115 (13,660) 41,844 (18,980) 43,541 (19,750) 50,783 (23,035) 56,868 (25,795) 69,897 (31,705) 26,224 (11,895) 31,115 (14,113) 26,566 (12,050) 28,296 (12,834) 31,130 (14,120) 42,869 (19,445) 44,743 (20,295) 51,919 (23,550) 57,618 (26,135) 71,617 (32,485)

142 (106) 160 (119) 172 (128) 271 (202) 271 (202) 345 (257) 345 (257) 380 (283) 142 (106) 172 (128) 142 (106) 160 (119) 172 (128) 271 (202) 271 (202) 345 (257) 345 (257) 380 (283)

21,600 (9 800) 23,149 (10 500) 26,460 (12 000) 28,000 (12 700) 32,000 (14 500) 32,400 (14 700) 39,460 (17 900) 40,450 (18 350) 40,450 (18 350) 50,930 (23 100) 51,810 (23 500) 66,100 (30 000) 66,800 (30 300)

123 (91.7) 128 (95.4) 143 (106.6) 156 (116.3) 170 (126.8) 197 (146.9) 212 (158.1) 222 (165.5) 222 (165.5) 277 (206.6) 297 (221.4) 344 (256.5) 351 (261.7)

9,250 (4,195) 12,220 (5,540) 180,290 (81,780) 17,900 (8,120) 24,380 (11,060) 26,410 (11,980) 28,065 (12,730) 31,610 (14,340) 35,350 (16,170) 38,540 (17,480) 38,910 (17,650) 45,560 (20,670) 53,310 (24,180) 75,790 (34,380) 79,080 (35,870) 104,230 (47,280) 106,110 (48,130)

45 (34) 61 (45) 720 (537) 95 (71) 152 (113) 152 (113) 152 (113) 168 (125) 168 (125) 193 (145) 193 (144) 243 (181) 275 (205) 388 (289) 388 (289) 531 (396) 531 (396)

MAX DUMP HEIGHT FT. (M)

BUCKET CAPACITY CU. YD. (CU M)

2.6 (2.0) 3.0 (2.3) 3.2 (2.5) 4.2 (3.2) 4.8 (3.7) 5.5 (4.2) 6.3 (4.8) 7.5 (5.7) 2.6 (2.0) 3.4 (2.6) 2.6 (2.0) 2.6 (2.0) 3.4 (2.6) 4.2 (3.2) 4.8 (3.7) 5.5 (4.2) 6.3 (4.8) 7.5 (5.7)

2.5 (1.9) 2.5 (1.9) 3.0 (2.3) 3.0 (2.3) 3.7 (2.8) 3.7 (2.8) 4.3 (3.3) 4.3 (3.3) 4.3 (3.3) 5.5 (4.2) 5.5 (4.2) 7.1 (5.4) 7.1 (5.4)

) 0.78 to 1.0 (0.6 to .76 ) .90 to 6 (.7 1.0 to 1.18 .3) 10 to 25 (8. .5 13 to 10.8 ) 1.8 to 5 (1. 2.0 to 2.4 ) 2.8 to 3.1 (2.1 to 2.4 ) 2.7 to 4 (2. 3.1 to 3.5 ) 2.8 - 3.1 (2.1 to 2.4 ) 3.3 to 4.2 (2.5 to 3.2 ) 3.4 - 3.7 (2.6 to 2.8 ) 3.5 to 4.7 (2.7 to 3.6 ) 3.6 to 7 (2. 4.7 to 3.5 ) 4.0 to 3 (3. 4.3 to 5.2 ) 4.9 to 6.1 (3.7 to 4.7 ) 6.2 to 7 (4. 6.2 to 8.1 ) 9.0 to 9.8 (6.9 to 7.5 ) 6.9 to 6 (5. 7.3 to 9.0 9.15 (7.0)

9.5 9.3 (2.85) 9.2 (2.79) 9.3 (2.85) 10 (3.04) 10.1 (3.07) 10.7 (3.24) 11.2 (3.41) 8.8 (2.69) 9.0 (2.74) 10.9 (3.29) 10.7 (3.25) 10.7 (3.25) 11.2 (3.40) 11.7 (3.59) 11.7 (3.59) 12.3 (3.73) 12.6 (3.83)

8.10 (2.7) 8.10 (2.7) 9.2 (2.8) 9.2 (2.8) 9.4 (2.85) 9.4 (2.85) 9.9 (3.0) 9.9 (3.0) 9.9 (3.0) 10.2 (3.1) 10.2 (3.1) 10.10 (3.3) 10.10 (3.3)

10.3 (3.1) 10.3 (3.1) 19.8 (6.0) 11.6 (3.6) 12.5 (3.8) 12.6 (3.8) 13 (4.0) 12.8 (3.9) 13.5 (4.1) 13.4 (4.1) 13.4 (4.1) 14.0 (4.3) 14.5 (4.4) 15.2 (4.9) 14.5 (4.4) 16.5 (5.1) 15.9 (4.9)a

EL LOADERS LISTINGS

VISIT WWW.CONSTRU

CTIONEQU

R COMPLETE WHE IPMENTGUIDE.COM FO

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 91

ENGINE TYPE

MODEL

OPERATING WEIGHT LBS. (KG)

ENGINE POWER HP (KW) P= Parallel Linkage

LIEBHERR L 524 Z L 524 P L 528 Z L 528 P L 538 Z L 538 P L 542 Z L 542 P L 550 Z L 550 Ind. L 556 Z L 556 Ind. L 566 Z L566 Ind. L 580 Z L 580 Ind. L 586 Z

G LIUGGIOII N Z-bar CLG816 CLG835III Z-bar CLG835III TC CLG842III Z-bar CLG842III TC CLG856III Z-bar CLG877III CLG888III

KOMATSU WA200-7 WA270-8 WA320-8 WA380-8 WA470-8 WA500-8 WA600-8 WA800-3 WA900-3 WA1200-6

VOLVO L20F L30G L35G L45G L50G L350F L110H L120H L150H L180H L220H L250H L60H L70H L90H

4045HFL92 4045HFL92 4045HFL93 4045HFL93 4045HFL93 4045HFL93 4045HFL93 4045HFL93 Liebherr D 934 A7 Liebherr D 934 A7 Liebherr D 934 A7 Liebherr D 934 A7 Liebherr D 936 A7 Liebherr D 936 A7 Liebherr D 936 A7 Liebherr D 936 A7 Liebherr D 936L A6

Yanmar 4TNV98 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSB6.7 Cummins QSM11 Cummins QSM11

SAA4D107E-2 SAA6D107E-3 SAA6D107E-3 SAA6D107E-3 SAA6D125E-7 SAA6D140E-7 SAA6D170E-7 SAA12V140E-3 SAA12V140E-3 SDA16V160E-2

Volvo D3.6D Volvo D3.3D Volvo D3.3D Volvo D4H Volvo D4H Volvo D16E LA E3 D8J D8J D13J D13J D13J D13J D6J D6J D6J

BUCKET CAPACITY CU. YD. (CU M)

ge Ind.= Industrial Linka

Z= Z Linkage

22,930 (10,400) 25,355 (11,500) 24,030 (10,900) 27,115 (12,300) 28,220 (12,800) 29,500 (13,380) 29,540 (13,400) 30,425 (13,800) 38,140 (17,300) 39,350 (17,848) 39,460 (17,900) 40,895 (18,550) 51,035 (23,149) 53,240 (24,149) 55,510 (25,178) 57,450 (26,060) 69,996 (31,749)

121 (90) 121 (90) 134 (100) 134 (100) 154 (115) 154 (115) 161 (120) 161 (120) 173 (129) 173 (129) 188 (140) 188 (140) 255 (190) 255 (190) 288 (215) 288 (215) 335 (250)

12,340 (5,597) 28,440 (12,900) 29,983 (13,600) 33,601 (15,241) 34,923 (15,840) 40,680 (18,452) 56,438 (25,599) 66,139 (30,000)

67 (50) 160 (119) 160 (119) 193 (144) 193 (144) 220 (164) 290 (216) 335 (250)

126 (94) 149 (111) 165 (123) 191 (142) 272 (203) 353 (263) 529 (395) 808 (603) 856 (638) 1,765 (1,316)

,430 - 11,825) 25,199 - 26,070 (11 5 kg - 13,190) ,79 (12 9 28,208 - 29,07 0 - 15,870) ,48 (15 34,128 - 34,987 385 - 19020) (18 2 ,93 40 2 ,53 40 ,200 - 25,210) 53,352 - 55,579 (24 ,880 - 35,315) (34 6 ,85 76,897 - 77 ,400 - 57,460) (55 122,136 - 126,678 1,900 - 104,500) (10 80 0,3 23 50 224,6 ) (107,200 - 107,350 236,340 - 236,670 220,550) 09 6,4 (21 50 6,2 477,100 - 48

9,945 (4,511) 12,125 (5,500) 13,779 (6,250) 19,070 (8,650) 20,790 (9,410) 110,530 (50,136) 40,920 (18,561) 42,830 (19,427) 55,320 (25,093) 61,890 (28,073) 70,440 (31,951) 76,544 (34,720) 25,900 (11,748) 29,200 (13,245) 32,220 (14,615)

50 (37) 71 (53) 71 (53) 98 (73) 114 (85) 528 (394) 258 192) 276 (206) 300 (224) 333 (248) 371 (277) 389 (290) 165 (1231) 170 (127) 184 (137)

2.7 (2.0) 2.4 (1.8) 3.0 (2.2) 2.7 (2.0) 3.4 (2.4) 3.0 (2.3) 3.7 (2.8) 3.3 (2.5) 4.2 (3.2) 3.9 (3.0) 4.7 (3.6) 4.3 (3.3) 5.2 (3.9) 4.6 (3.5) 6.5 (5.0) 5.9 (4.5) 7.9 (6.0)

1 (.7) 2.5 (1.9) 2.5 (1.9) 3.5 (2.7) 3 (2.3) 4.5 (3.4) 5.5 (4.2) 6.8 (5.2)

2.2 - 3.1 (1.7 - 2.4) 2.5 - 3.5 (1.9 - 2.7) 3.0 - 4.2 (2.8 - 3.2) 3.5 - 4.3 (2.7 - 3.3) 5.0 - 5.8 (3.8 - 4.4) 5.9 - 8.2 (5.2 - 6.3) ) 8.4 - 10.2 (6.4 - 7.8 14.0) 13.1 - 18.3 (10.0 .0) 15.0 - 17.0 (11.5 - 13 35.0) .0 (18 .8 45 .5 23

0.9 - 1.4 (.68 - 1.1) 1.2 - 2.0 (.92 - 1.5) 1.3 - 2.0 (.99 - 1.5) 2.0 (1.5) 1.8 - 3.0 (1.4 - 2.3) .7) 8.1 - 16.6 (6.2 - 12 ) 3.2 - 12.4 (2.4 - 9.5 ) 3.2 - 12.4 (2.4 - 9.5 ) 3.5 - 12.4 (2.7 - 9.5 ) 9.5 7 (2. .4 12 3.5 ) 3.5 - 12.4 (2.7 - 9.5 .2) 6.7 - 13.3 (5.1 - 10 2.1 - 6.5 (1.6 - 5) 2.4 - 8.4 (1.8 - 6.4) 2.7 - 9.2 (2.1 - 7)

10.9 (3.3) 11 (3.3) 10.9 (3.3) 11 (3.3) 11.4 (3.5) 11.3 (3.4) 11.4 (3.5) 11.3 (3.4) 11.6 (3.5) 11.6 (3.5) 11.6 (3.5) 11.6 (3.5) 12.9 (3.9) 12.9 (3.9) 13.5 (4.1) 12.9 (3.9) 13.6 (4.1)

7.8 (2.4) 9.6 (2.9) 9.7 (3) 9.8 (3) 9.3 (2.8) 9.8 (3) 10.5 (3.2) 10.8 (3.3)

9.8 (3.0) 9.8 (3.0) 9.4 (2.9) 9.7 (2.9) 10.4 (3.2) 10.8 (3.3) 12.8 (3.9) 15.2 (4.6) 15.3 (4.6) 23.2 (7.1)

8.3 (2.5) 8.4 (2.6) 8.8 (2.7) 9.2 (2.8) 9.4 (2.9) 11.3 (3.4) 9.2 (2.8) 9.5 (2.9) 9.9 (3) 10 (3) 10.3 (3.1) 10.6 (3.1) 9.3 (2.8) 9.2 (2.8) 9.3 (2.8)

EL LOADERS LISTINGS

R COMPLETE WHE IPMENTGUIDE.COM FO

CTIONEQU

VISIT WWW.CONSTRU

MAX DUMP HEIGHT FT. (M)

Page 92 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Power-Split Transmission Manages Interaction of Two Drive Types LIEBHERR from page 88

total of 9,000 hours in the steel works without any damage to the main components. Liebherr exposed other test wheel loaders to tough conditions. At a harbor terminal, a L 586 XPower loaded coal using a 13 cu. yd. (10.0 cu m) bucket. One of the challenges in this load-and-carry operation was to spread the partially-wet coal. The Liebherr test wheel loader completed its task reliably for over 7,000 operating hours with minimal fuel consumption. During the test, the L 586 XPower used between 2 and 2.6 gal. (8 and 10 L) less diesel per operating hour than its predecessor, which normally operates in the harbor. Versatile XPower Wheel Loaders Impress in Industrial Applications Liebherr-Werk Bischofshofen GmbH tested the new wheel loader generation in various industrial applications

including working in a paper factory. Here the test machine was an L 556 XPower with industrial lift arm, 7.8 cu. yd. (6.0 cu m) light material bucket with undercut blade and numerous Liebherr factory-fitted options, including a coarse meshed cooler net and a lint filter to reduce contamination of the cooling system with dust particles. The test showed that the new Liebherr SCR technology increased operational safety. This simple and extremely effective system for the after-treatment of exhaust gases means that regeneration is no longer necessary and fire risk is reduced to a minimum. This is a significant safety feature in dust-intensive environments such as indoor operation in the paper factory. Another L 556 XPower with industrial lift arm worked in aluminium scrap recycling. As part of the test’s 3,500 operating hours, several machine operators worked in a threeshift operation with two different

attachment tools, which they changed with the aid of a hydraulic quick hitch. As with the paper factory, the space was confined but, due to the compact design of the XPower wheel loader, the machine operators were able to maneuver efficiently and perform very well in handling. Liebherr-Werk Bischofshofen GmbH deployed other wheel loaders in recycling tasks. An L 556 XPower worked in the disposal of slag waste. For this heavy material, which placed considerable demands on the wheel loader, the test customer used a 5.2 cu. yd. (4.0 cu m) high-dump bucket with undercut blade. The robust wheel loader loaded material, formed heaps and fed crushers for a total of 5,000 operating hours over a two-shift operation. For more information, visit www.liebherr.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Increased Performance…

Camso Launches Wheel Loader Tires Camso — formerly Camoplast Solideal — added two new wheel loader tire solutions to its line-up: the Camso WHL 775 and the Camso WHL 773. The Camso WHL 775 is a high performance solution built to excel in severe conditions. Developed as a solution for harsh waste, recycling, demolition and scrap yard applications, the Camso WHL 775 has an extra deep L5 lug tread for enhanced durability and protection against flats on extreme mixed and hard surfaces. The contoured lug base promotes material ejection and defends against cracking. Its robust carcass improves stability and with a heavy-duty sidewall construction that resists side impacts and deformation under heavy loads. This bias L5 tire also is especially relevant for those customers looking to flat proof their tires with urethane fill, according to the manufacturer. “We build and offer a wide range of products to operate in numerous niche applications and environments,” said David Fleischhauer, executive director, market development — construction at Camso. “Offering tires that last longer, reduce downtime and enhance productivity helps us bring a lower operating cost solution to our customers’ fleets. These two new wheel loader tires will do just that.” Developed with a solid understanding of construction equipment mobility issues and what’s required to enhance productivity, the Camso WHL 773 excels in the most rigorous and demanding job sites. Its mono-block tread pattern provides optimal performance on hard surfaces and is designed to resist rubber chipping and chunking. A wide

Sievers JCB

Fairchild JCB

406 Old Rt 66 Hamel, IL 62046 618-633-2622

15735 Central Avenue NE Ham Lake, MN 55304 763-434-3832

8080 State Rt 16 Hillsboro, IL 62049 217-532-3222

3100 Highway 13 West Burnsville, MN 55337 952-697-1720

State Route 267 South Greenfield, IL 62044 217-368-2486

2140 Hutson Road Green Bay, WI 54303 920-494-8726

14464 Shad Rd Carlinville, IL 62626 217-854-3191

2815 Mary Street Marinette, WI 54143 715-735-0402

1351 W Jackson St Auburn, IL 62615 217-438-6111 www.sieversjcb.com

5217 Heffron Court Stevens Point, WI 54481 715-341-6846 www.fairchildjcb.com

Rueter’s

General Equipment & Supplies, Inc.

1132 31st Ave Council Bluffs, IA 51401 712-366-5221 2425 NE 126th Ave Elkhart, IA 50073 515-367-3054 Hwy 30 West Grand Junction, IA 50107 515-738-2571 23296 Hwy 30 East Carroll, IA 51401 712-792-9294 E Highway 275 Neligh, NE 68756 402-917-5604 www.ruetersjcb.com

Sellers JCB 1645 S. West St. Wichita, KS 67213 316-943-9311 Fax: 316-943-8116 3030 S. W. 57th St. Topeka, KS 66609 785-862-0031 400 N. Chicago St. Salina, KS 67401 785-823-6378 395 N. Industrial Dr. Garden City, KS 67846 620-275-9621 www.sellersequipment.com

Camso added two new wheel loader tire solutions to its line-up: the Camso WHL 775 and the Camso WHL 773.

footprint ensures excellent stability in rocky abrasive conditions. Designed with a high lug-to-void ratio, the Camso WHL 773 provides tremendous durability and increased defense against tread impact, according to the manufacturer. Both the Camso WHL 775 and the Camso WHL 773 are now available from Camso dealers. They were officially launched on Jan. 18, 2016. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

4300 Main Avenue Fargo, ND 58103 701-282-2662 Fax: 701-364-2190 905 20th Ave. SE Minot, ND 58701 701-582-0479 3500 Apple Creek Road Bismarck, ND 58504 701-223-9700 4082 2nd Ave. West Williston, ND 58801 701-572-0570 www.genequip.com

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 93

SEIZE SEI ZE THE T WORKDAY W RKD WO DA AY Y Contact your loccal JCB dealer for details on n zero percent financing and cash back offers!

Don’t just survive the workday—conquer it with the two newest JCB wheel loaders that meet Tier 4 Final legislation on without a costly DPFF. Using only exhaust gas recirculation and selective catalytic reduction methods, saves you time and money on the job, reducing your overall cost of operation. The JCB 427 & 437 Wheel Loaders are two great new options for your material handling needs. To To learn more visit JCBNA.com today.

/JCBNA JCBNA

JCB of St. Louis 7978 Veterans Pkwy. St. Peters, MO 63376 636-281-4450

CSTK JCB 400 Shawnee Avenue Kansas City, KS 66105 913-371-0868 www.cstkjcb.com

@JCBNA JCBNA www ww w.jcbna.com

MH JCB

Diesel Machinery Inc.

JCB of Chicago

11715 W Silver Spring Road Milwaukee, WI 53225 262-783-7510

106 Circle Freeway Dr, Cincinnati, OH 45246 513-681-2200

4301 N Cliff Ave, Sioux Falls, SD 57104 888-753-8907

1603 E Algonquin Rd Arlington Heights, IL 60005 847-437-8686

7001 Manufacturers Drive Madison, WI 53704 608-243-9253 www.buyjcb.com

3306 Gilmore Industrial Blvd, Louisville, KY 40213 502-962-6560

39288 133rd St, Aberdeen, SD 57401 888-484-6312

16754 New Ave Lemont, IL 60439 630-257-1261

5859 Raymond St, Indianapolis, IN 46241 317-240-6300 www.mhjcb.com

3801 N Deadwood Ave Rapid City, SD 57702 800-658-3047 www.dieselmachinery.com

1548 Huntwood Dr Cherry Valley, IL 61016 815-332-8222 www.jcbchicago.com

YES JCB

4174

Page 94 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Cat System…

Simulator Delivers Wheel Loader Operating Experience With technology from Simformotion LLC — a leader in heavy equipment simulator training solutions — the newly released Cat large wheel loader simulator system creates a realistic training experience for operators. Set in a quarry environment, the large wheel loader simulator system combines original controls with common machine applications to teach the same jobs performed on worksites worldwide. The system also is the first model to offer a three-monitor configuration, giving the operator a more authentic experience by increasing visibility in all directions. The addition of a motion system enhances the experience because the operator feels vibration and movement as the simulated loader interacts with the quarry terrain. “Time after time our customers tell us that using Cat simulators as part of their training programs contributes to more proficient operators, safer practices and increased productivity,” said Renee Gorrell, vice president. “The features of the new large wheel loader simulator system enhance the training experience and enable a seamless transition from simulator to iron.” The large wheel loader simulator system includes exercises that teach control familiarization, how to perform a walka-

round for safety and maintenance, driving, loading and dumping the bucket, truck loading, and dumping into the crusher. two open training modules offer opportunities for additional practice and skill refinement. Exclusive to Cat simulators is SimU Campus training records management, software that measures, records and reports results of all simulation sessions. Hundreds of benchmarks based on Caterpillar expert data are included, with performance measured against these benchmarks and outcomes recorded to a database. The large wheel loader simulator system also includes companion iPad training and is available in multiple languages. In addition to the new large wheel loader simulator system, Cat simulators are available in articulated truck, MSeries motorgrader, large track type tractor, mining truck, off-highway truck, electric rope shovel, track type tractor, hydraulic excavator, small wheel loader, wheel tractorscraper, FM log loader and track feller buncher. For more information, visit www.catsimulators.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Cat simulators new large wheel loader simulator system features a three-monitor configuration that increases operator visibility in all directions.

SDLG Releases Upgraded Wheel Loaders in North America SDLG will roll out Tier IV Final wheel loaders across North America beginning this spring. The new machines are upgraded to meet emissions regulations standards in the United States and Canada. All four models that are currently for sale in the region are being replaced with a Tier IV Final version. The 2.5 cu. yd. (1.9 cu m) capacity LG938L and the 3.0 cu. yd. (2.3 cu m) capacity LG948L will be replaced with the new Tier IV Final loaders beginning June 2016 (with the L938F and L948F, respectively), while the larger models, the 4.0 cu. yd. (3 cu m) capacity LG958 and LG959, will be replaced later this year by the L958F and L959F in the United States. In Canada, the rollout of the L958F and L959F will occur over a longer timetable, with the larger loaders being replaced with the new models by late 2017. “SDLG fills a market niche in which its customers don’t require the most cutting-edge technologies for their applications, but that doesn’t mean they don’t need well-made machines that are environmentally friendly,” said Al Quinn, director of SDLG North America.

Along with the new Tier IV Final engines, several additional enhancements have been made to the wheel loaders, all based on customer feedback in North America. These improvements include: • A new, branded SDLG SD60 engine, manufactured by Deutz-Germany, for improved serviceability and technical interface • Passive regeneration of the engine to improve operator performance

The 2.5 cu. yd. (1.9 cu m) capacity LG938L and the 3.0 cu. yd. (2.3 cu m) capacity LG948L will be replaced with the new Tier IV Final loaders beginning June 2016 (with the L938F and L948F, respectively), while the larger models, the 4.0 cu. yd. (3 cu m) capacity LG958 and LG959, will be replaced later this year by the L958F and L959F in the United States.

• Cab enhancements, such as no threshold on loader doors and improvements that reduce noise levels

• Improved serviceability to the engine compartment via new compartment door • Chrome coupler pins for better engagement and disengagement of the quick coupler • New joystick control with forward, neutral and reverse directions on the joystick; first gear kickdown on trigger finger • Improved heating and air conditioning controls • Guarding on underside of front and rear frames • New front and rear guard plates that reduce noise and protect loader components “We are consistently striving to improve our wheel loaders while retaining the value proposition that makes them so attractive to customers. And that is why these new Tier IV wheel loaders will have so many additional upgrades,” Quinn explained. “Not only will customers see several enhancements to their user experience, they will be operating machines that have lower emissions.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 95

Page 96 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Komatsu America Corp. Introduces WA320-8 Wheel Loader Komatsu America Corp. introduced the WA320-8 wheel loader. Equipped with an EPA Tier IV Final certified engine, this latest addition to the wheel loader family combines high production with low fuel consumption and improved operator comfort, according to the manufacturer. The WA320-8’s parallel-lift linkage, with auto tilt-in to simulate a Z-bar, can be used in any application from pallet handling to hard digging. Fuel consumption is lower by up to three percent in V-cycle loading and two percent in load and carry applications. “The easy-to-control hydrostatic transmission makes the WA320-8 ideal for agriculture and residential applications, but its size and attachment-friendly quick coupler makes it an all-around performer for almost any worksite,” said Craig McGinnis, product marketing manager, Komatsu America. “It’s a multi-purpose utility knife on four wheels.” Standard features of the new WA320-8 include: Under The Hood/Performance Enhancements • A powerful 6.69 liter, 165 hp, EPA Tier IV Final certified, SAA6D107E-3 engine uses up to 3 percent less fuel than its Tier IV Interim predecessor. • Komatsu diesel particulate filter (KDPF) and other after treatment components are designed in conjunction with the engine for efficiency and long life. • The new SCR system reduces NOx emissions and is designed to last the life of the engine. • More than 98 percent of KDPF regeneration is performed passively, with no action required of the operator and no interference with machine operation. • Proven, fourth generation hydrostatic drivetrain with variable traction control and S-mode provides excellent traction control to reduce wheel slip. S-mode is ideal for snowy, icy or slippery conditions. • Creep mode in first gear is easily controlled via a knob on the RH console. This mode allows the operator to dial in travel speed from one to eight miles an hour. In-Cab Enhancements/Features • New, more comfortable, high-back, heated seat softens machine vibrations for operator comfort. • Pioneering KOMTRAX telematics system and monitor that provides key machine metrics, including KDPF status and DEF-level data, fuel consumption, plus performance information collected and sorted by operator ID. • Komatsu auto idle shutdown to reduce idle time and save fuel. • Auxiliary jack and two 12 volt ports. • Seven inch, LCD color monitor with ecology guidance.

The WA320-8’s parallel-lift linkage, with auto tilt-in to simulate a Z-bar, can be used in any application from pallet handling to hard digging.

• Separate full color rear view monitor standard. Additional Features/Benefits • Swing out, hydraulically-driven cooling fan, with wider fin spacing and autoreversing fan for ease of cleaning. • Gull-wing engine doors provide quick, convenient access for daily checks and service items. • Full rear fenders optional. • DEF tank features a convenient sight

glass to discourage overfilling. The WA320-8 and every other Komatsu Tier IV Final construction-sized machine, whether rented, leased or purchased, is covered by the Komatsu CARE program for the first three years or 2,000 hours, whichever comes first. Komatsu CARE includes limited scheduled factory maintenance, a 50point inspection at each service, and one complimentary Komatsu diesel particulate filter exchange in the first five years. With

select labor, fluids and filters covered by Komatsu over this period, Komatsu CARE lowers ownership costs, raises resale value and improves equipment uptime and availability. For full program details, refer to the Komatsu CARE reimbursement letter. For more information, visit www.komatsuamerica.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 97

Cat Medium Wheel Loaders Feature Connect Technology Caterpillar has announced the 2016 product update to the Cat M Series medium wheel loader product line (950M, 962M, 966M, 972M, 966M XE, 972M XE, 980M and 982M). These product updates enable Caterpillar to bring new features and product improvements to market more rapidly and with greater frequency than the traditional machine development cycle. The 2016 product updates include all new Cat Connect Technologies, additional safety features and reduced operating costs. Cat Connect Technologies The new Product Link Elite system is now offered as standard equipment providing faster cellular and satellite connection capabilities. In addition, the standard machine is shipped from the factory ready to accept the Cat production measurement system. Version 1.2 of the system now indicates when the linkage is in the weighing range, allowing operators to con-

firm that an accurate scaled weight is being determined. The system also allows operators to manually activate the tip-off feature for those applications in which “auto” tipoff detection is not ideal. The updated Cat production measurement system helps the operator to more easily navigate truck and material identification lists via the monitor. The easy-tocalculate system allows the use of multiple buckets by “zeroing” up to 66.5 percent of the original calibration weight (previously less than 15 percent). In addition, the standard third-party payload interface enables third-party scale systems to be shown on the cab touch screen as well as Cat VisionLink. If the system is installed with a payload printer, the printer can be mounted using pre-drilled/tapped holes on the right front ROPS tube. The Cat object detection system is integrated into the standard display. This radar system increases the operator’s awareness of obsta-

cles up to 52 ft. (16 m) behind the machine. The system utilizes market-leading capability, speed-based zones and provides five proximitywarning levels which increase in intensity and frequency as the “stop zone” warning area approaches. Additional Safety Features New cab steps increase step durability and improve boot contact for increased safety in and out of the cab. Longer-lasting, lower power-consuming LED lights replace the auxiliary halogen-type light option providing four or eight LED work lights at the front and rear of the machine, and two in the rear hood. An optional 4-point seat belt restraint system provides increased protection from frontal collisions. Additionally, a new, easily visible, roof-mounted, seat belt indicator LED light shines green when the seat belt is buckled promoting operator safety. Optional wheel chocks are con-

veniently mounted to the front frame of the machine reducing the opportunity for the machine to roll. Furthermore, additional mounting provisions in the cab allow operators the ability to customize their machine and mount items such as a fire extinguisher or a radio. Other enhancements include: a newly designed right-hand window that makes an emergency exit from the machine faster; additional storage in the base of the cab door that does not impact visibility; repositioned grab rails that provide safe, easy entrance to the cab. Furthermore, operators can grasp a new grab handle below the membrane switch pad while driving over rough terrain or getting in and out of the seat. Reduced Operating Costs The XE models, 966M XE and 972M XE, feature a new economy mode that provides up to 4 percent improved fuel economy during general machine operation and up

The 2016 product updates include all new Cat Connect Technologies, additional safety features and reduced operating costs.

to 8 percent improved fuel economy in aggressive truck-loading applications with essentially no loss in production capability. This reduction in fuel consumption is in addition to the XE models’ basic reduction in fuel consumption, up to 25 percent, compared with comparable torque-converter-equipped models. The economy mode, enabled and disabled via the LCD touch display, automatically lowers engine speed to 1,400 rpm when full power is not required and is transparent to the operator, according to the manufacturer. The variable ground-speed limiter, previously available for only XE models, is now available for all conventional M Series medium wheel loaders. This feature allows site managers to set machine speed limits from 9 to 25 mph (15 to 40 kmh) with independent adjustments for forward and reverse. The settings are protected with the machine service-mode password. An updated touch-screen display now allows operators to select information displayed on the “quad screen,” which can simultaneously display, for example, axle oil temperatures, instant fuel rate, electrical system voltage, and temperatures for fluid in the torque converter and hydraulic system. A newly designed engine hood allows easier routine service and features a new actuator that speeds opening to approximately 35 seconds. The new impact-resistant hood exhibits greater durability during operation as well as improved cooling airflow and enhanced rearward visibility. Optional impact and corrosionresistant, hood-mounted rear roading fenders are now available on all models The newly designed, impact and corrosion-resistant front fenders provide increased coverage to protect the cab from wheel spray. Fender packages for low-profile tires which provide enhanced lateral and fore-aft stability are available for all medium wheel loader models where an additional deflector ensures 100 percent tire coverage. For more information, visit www.cat.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 98 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

JCB Boosts Mid-Range Wheel Loader Performance, Comfort, Visibility JCB is upgrading its mid-range wheel loader range, introducing the proven DNA from its range-topping 457 wheel loader to the 427 and 437 models, along with the smaller 411 and 417 loaders. Key features include: • JCB’s CommandPlus cab delivers class-leading comfort and visibility • Innovative CommandPlus Control system • Tier IV Final/Stage IV compliant engines with no costly diesel particulate filter • Single-piece hood for improved service access • Range of loader arms to suit various industry applications • Optional Wastemaster package available Clean Performance JCB’s new 411 and 417 wheel loaders are powered by the company’s own EcoMAX Tier IV Final/Stage IV compliant diesel engines, delivering 108 hp (81 kW) in the 411 and a powerful 125 hp (108 kW) in the 417. The larger 427 and 437 loaders operate with a Tier IV Final/Stage IV Cummins diesel engine, offering 179 hp (133 kW) and 183 hp (136 kW) respectively. In line with JCB’s overall emissions policy, both of these engines meet the latest emissions standards without the use of a costly diesel particulate filter (DPF), reducing operating costs and complexity for the customer. All Tier IV Final wheel loaders now feature a single-piece engine hood that can be electrically or manually raised to provide improved service access to the engine and cooling pack. The machines drive through automatic powershift transmissions for maximum productivity and efficiency. All four machines feature fine mesh front grills to trap larger particles before the air enters a cyclonic pre-filter. The engine-cooling fan provides a cyclonic scavenge system to remove dust particles from the pre-cleaner, rather than using hotter exhaust gases to deliver the cyclonic action. Wide core cooling packs reduce dust accumulation, cutting the downtime required to blow out radiator cores. The single-piece hood also helps to provide a seal around the engine bay, cutting dust and dirt ingress. A reversible cooling fan is available as an option. Operator Comfort All four of the new wheel loaders will use the JCB CommandPlus cab, first seen last year on the larger 457. This totally new ROPS structure has A pillars that have been moved out to the same width as the rear of the cab, providing a larger interior with a panoramic front windshield. The machines feature JCB’s command driving position with revised pedals, an adjustable steering column and seatmounted hydraulic controls. Switches and auxiliary controls have been repositioned on the right-hand A pillar, providing the operator with a simplified interior and easy access to all machine controls. The loaders have full-color LCD screens that incorporate access to the loader’s operating menus and act as a monitor for a rear view camera. JCB’s CommandPlus Control system allows the operator to adjust auxiliary flow rates on the main screen. It also is possible to use the monitor to adjust SRS boom suspension

engagement speeds where fitted and the timing of cooling fan reversal to clean out the cooling pack cores. The screen also offers an operator help system that lists switch functions if required. The cab benefits from increased internal space, as the heating, ventilation and air conditioning system has been repositioned outside the main cab structure. This provides additional storage for the operator, both behind the seat and in pockets in the front and side consoles. The new cab, in combination with on-demand cooling fans and the Tier IV Final engines contribute to a cut in noise and vibration, reducing operator fatigue and boosting productivity, according to the manufacturer.

ILLINOIS

INDIANA

Diamond Equipment 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 618-242-2273 800-388-6396 Fax: 618-242-9161 www.diamondequipment.com

Diamond Equipment 1060 Diamond Ave. Evansville, IN 47711 812-425-4428 dmfortune @diamondequipment.com www.diamondequipment.com

Martin Implement Sales, Inc. 18405 115th Avenue Orland Park, IL 60467 708-349-8430 Fax: 708-349-4230 420 Nolen Drive South Elgin, IL 60177 630-883-3320 Fax: 847-695-9105 26354 N US Highway 12 Wauconda, IL 60084 847-469-0120 Fax: 847-526-8054 www.martinimplement.com

KENTUCKY Diamond Equipment 1046 Lovers Lane Bowling Green, KY 42103 270-781-1061 800-489-1061 Fax: 270-781-0907

2000 Harlan Drive Terry Haute, IN 47802 812-299-4747 888-343-4747 Fax: 812-299-3687

Hardings Heavy Equipment 109 W. Commercial Ave. Lowell, IN 46356 219-696-8911 www.hardingsinc.com info@hardingsinc.com

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868 4951 West 96th Street Indianapolis, IN 46268 317-872-4877 www.southeasternequip.com

KANSAS Team Boone 150 Schuler Dr. Bardstown, KY 40004 502-348-7573 Fax: 502-348-4401 www.teamboone.net

The Victor L. Phillips Co. www.vlpco.com 3250 N. Hydraulic St. Witchita, KS 67219 316-838-3347 1305 SW 42nd St. Topeka, KS 66609 785-267-4345

JCB’s 417, 427 and 437 wheel loaders have been upgraded with features found on the company’s range-topping 457 wheel loader model.

Operators benefit from a range of seat and control options, with electro-hydraulic proportional auxiliary controls now fitted as standard. An electric parking brake is standard on the 427 and 437 and available as an option on the smaller models. The exhaust silencers, and air pre-cleaners are all situated below the hood to provide maximum visibility for the operator. Job-Specific Design The 411 and 417 loaders come standard with HT loader arms for easy load handling and improved tool-carrier performance. The loader arms are available in parallel- and nonparallel lift for ultimate shovel-handling characteristics. Bucket capacity is 50 cu. ft. (1.4 cu m) for the 411 and 60 cu. ft. (1.7 cu m) for the 417. The larger models can be ordered with a choice of HT or power ZX loader arms, in a range of lengths to suit every industry application. The 427 operates with a 85 cu. ft. (2.4 cu m) bucket while the 437 is equipped with a larger 95 cu. ft. (2.7 cu m) shovel. For more information, visit www.jcbna.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

IOWA Rueter’s www.rueterco.com 1132 31st Ave. Council Bluffs, IA 51401 712-366-5221 Fax: 712-366-5228 Hwy 30 West Grand Junction, IA 50107 515-738-2571 Fax: 515-738-2343 Hwy 30 East Carroll, IA 51401 712-792-9294 Fax: 712-792-6808 2425 NE 126th Ave. Elkhart, IA 50073 515-367-3054

2203 W. Jones Ave. Garden City, KS 67846 620-275-1996

NEBRASKA Rueter’s www.rueterco.com E. Hwy 275 Neligh, NE 68756 402-917-5604 Fax: 402-887-5638

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 99

MISSOURI

MICHIGAN Midland Engine 622 Jefferson Ave. Midland, MI 48640 989-631-4608 www.midlandengine.com

Buck & Knobby Equipment Co., Inc. 6220 Sterns Rd. Ottawa Lake, MI 49267 MI: 734-856-2811 OH: 419-476-5293 Fax: 734-856-2709 www.buckandknobby.com

The Victor L. Phillips Co. www.vlpco.com 4100 Gardner Ave. Kansas City, MO 64120 816-241-9290

5430 Missouri 43 Joplin, MO 64804 417-781-8222

6330 W. Highway 60 Brookline Station, MO 65619 417-887-2729

Page 100 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Hyundai Adds HL955TM to Tier IV Final Wheel Loaders Hyundai Construction Equipment Americas introduced the Hyundai HL955TM wheel loader, the newest addition to its HL900 series of Tier IV Final-compliant wheel loaders. The HL955TM joins a family of six other Hyundai HL900 wheel loader models the company began introducing in 2015 to U.S. and Canadian markets. The HL955TM is the second Tool Master model to join the HL900 series lineup following the recent launch of the HL940TM model. It features Hyundai’s Tool Master boom design, with dual linkage for increased lifting capacity, improved load stability, rapid dumping capability and enhanced visibility. The HL955TM comes equipped with a standard 3.5 cu. yd. (2.7 cu m) bucket, and delivers 28,219 lb. ft. (12,800 kgf) of bucket breakout force. A Cummins QSB6.7 Tier IV Final engine rated at 199 net hp (149 kW) powers the HL955TM. Accurate Onboard Weighing System Is Standard Like other Hyundai HL900 series wheel loader models, the HL955TM includes Hyundai’s proprietary onboard weighing system, which is accurate to +/- 1 percent. The system has automatic and manual settings for monitoring individual and cumulative bucket load weights. System measurements are displayed on the multi-function screen in the cab, providing reliable load-weight monitoring to support efficient production management. However, there is no onboard printer to facilitate certified load measurements.

The new Hyundai HL955TM wheel loader is the second Tool Master model to join the HL900 series. These models feature parallel linkage, which is especially effective in fork applications where level lifting is important.

Productivity and Fuel Economy Among Key Upgrades “The HL955TM provides the power, productivity and ease of operation customers have come to expect from Hyundai,” said Corey see HYUNDAI page 102

Mustang Answers Demand With New Articulated Loaders Answering the market demand for large wheel loaders, Mustang developed the 608 and 708 articulated loaders with customer requests and feedback at the forefront of the design process. The Mustang 608 and 708 articulated loaders lie within the 60 to 80 hp size class. Both models have Tier IV-certified engine emissions technology, with a Yanmar 64.4 hp (48 kW) engine on the 608 and a Deutz 74.3 hp (55 kW) engine powering the 708. The Yanmar engine uses a diesel particulate filter after-treating system, while the Deutz uses a diesel oxidation catalyst after treatment system. The 608 and 708 articulated loaders include standard convenience features such as a digital instrumentation display, Power-A-Tach attachment mounting system and a multi-function joystick. Digging and scraping performance is maximized through the highest breakout forces in their respective classes and front and rear locking differentials, according to the manufacturer. A heavy-duty, oscillating articulation joint offers 45-degree turning angles to the left and right and 10 degrees of oscillation in both directions for optimal traction and maneuverability. The bucket and tires follow a constant turning radius, so the rear tires of the loader follow the path of the front tires. Narrow machine widths allow access to tight, confined spaces that most skid steer loaders with comparable operating capacities cannot access. The “Z” bar-type linkage allows for mechanical self-leveling action in both the up and down directions, excellent bucket dump angles at the mid- and top-ranges of the lift path, see MUSTANG page 102

The Mustang 608 and 708 articulated loaders lie within the 60 to 80 hp size class. Both models have Tier IVcertified engine emissions technology, with a Yanmar 64.4 hp (48 kW) engine on the 608 and a Deutz 74.3 hp (55 kW) engine powering the 708.

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 101

How to Select the Right Tires for Wheel Loader Applications

By Allison McNeal SPECIAL TO CEG

Selecting proper wheel loader tires may make a significant difference between underperforming or excelling on job sites. If the correct tire is chosen for the application, it can save time and money down the road. Tire Types: Radial and Bias One of the first steps wheel loader owners should consider before purchasing tires is to be aware of what tire types are available. Mike Stark, Doosan wheel loader product specialist, said there are two popular tire styles: radial and bias. According to Stark, a radial tire tends to be more expensive; however, the machine’s total cost of ownership may be lower because the tires provide better traction and flotation, and help contribute to lower fuel

consumption. “Radial tires have better control, especially at higher speeds, because the tires don’t flex as much,” Stark said. “Also, a lower rolling resistance allows wheel loader operators to turn easier.” He said the tires also don’t heat up as much when in high-speed applications, extending tire life. Radial tires typically consist of two parts. The first is the casing, composed of one layer of rubber-coated steel cables that arc from one bead to the other. The second is rubber-coated steel plies — made up of steel belts — which are placed under the tread, helping resist cuts and punctures. Radial tires are ideal in applications where traction, tread wear and distance are important factors. Many times the wheel loader tires are operated on surfaces for loading applications.

Operators looking for tires that do well on gravel, as well as pit and quarry applications when cutting sidewall is a possibility, should consider bias tires because of the thicker side walls, Stark said. “Bias tires have thicker sidewalls, which gives them a stable and smooth ride,” Stark said. “The bias tires perform well because they are more repairable and the distances traveled are normally shorter.” According to Stark, Doosan wheel loaders come with standard bias tires, but many Doosan loaders are sold with optional radial tires. He said it depends on what application the tires will be operated in most. In addition to radial and bias tires, there are solid tires, which are normally reserved for wheel loaders working in scrap yard and industrial applications; and flotation tires, which are wider, but are ideal in soft and muddy ground conditions.

Multiple Tread Patterns After determining the best tire type for the application, the next step is to select the tread pattern or tire design. According to Stark, wheel loader tire treads should be tapered to allow material to exit the tires. In wet or muddy conditions, the excess build-up can fall out of the tire grooves, giving operators more traction on job sites. In common wheel loader applications, an L2 or L3 tread design is recommended. With the L2 tire, maximum traction and cleaning ability in sand and soft conditions is favorable. The L3 offers rock resistance in general loader applications. When looking for tire treads in pit and quarry applications, the bigger the tread number, the better. The L5S or L5 offers deeper tread depth and longer tread life. Although the L4 and L5 tires are more expensive than the lower numbered treads, see LOADER page 102

Page 102 • July 2, 2016 • www.constructionequipmentguide.com • Wheel Loaders, Tool Carriers & Attachments Section • Construction Equipment Guide

Designers Consider Its Customers Customers Should Requests, Feedback for Loader Consider Tread Pattern of Tires MUSTANG from page 100

mechanical return to dig, as well as outstanding forward reach. Proportional auxiliary hydraulics are standard equipment and are utilized with a roller switch on the joystick. Detent and pressure relief are included to optimize attachment hook-up and performance. Two easily accessible auxiliary hydraulic lines with flat-face couplers power a variety of tools and make attachment changes easy. Additionally, the 608 and 708 are available with three auxiliary circuit options to the front and rear, including high-flow. An open canopy ROPS is standard and a complete cab enclosure option is available, providing enhanced comfort and safety for day-long operation. Excellent 360-degree visibility is achieved by positioning the operator above the load for safe operation and excellent view of the attachment. A multi-function joystick controls the lift arm, bucket, float, travel direction, differential lock, speed selection and auxiliary hydraulic functions. An inching pedal allows operators to vary ground speed while maintaining a fixed engine speed to optimally run attachments while enabling precise machine speed control. Optional features include, but are not limited to; a Bluetooth “hands free” capable radio, air suspension seat, LED work lights, rotating beacon, high-flow auxiliary hydraulics, rear hydraulic hook-up, rear mount and clevis, Hydraglide Ride Control, and 3-speed transmission with

speeds up 19 mph (30 kph). The Mustang 608 and 708 articulated loaders are positioned in the North American market to meet the needs of agriculture, construction, municipalities, landscaping, recycling and rental. “We are seeing more wheel loaders sold into rental applications due to the low cost of ownership and intuitive controls,” said Nathan Ryan, product manager of Mustang articulated loaders. “Mustang tailored their design to meet the needs of this market through the economical canopy option, centered automotive style controls, multifunction joystick, and real-time fuel consumption monitoring.” “Mustang is committed to being a complete compact equipment solutions provider, and we recognize that wheel loaders have become a crucial piece of equipment in many industries,” said Ryan. “Mustang offers plenty of options to maximize the productivity of the 608 and 708 articulated loaders. Four auxiliary hydraulic and four auxiliary electrical options support nearly every imaginable attachment. Optional 3-speed and a cab enclosure with HVAC allow for efficient year-round use in the harshest environments. Mustang proudly welcomes articulated loaders to its compact equipment family.” For more information, call 262/334-9461 or visit www.mustangmfg.com.

LOADER from page 101

Stark said the cost of ownership comes into play, again. “If the machine is sitting around for a couple of hours each day, the owner might want to look at the up-front cost,” he said. “However, if he’s continually operating the machine, he may want to invest up-front in the right tire to save him money down the road.”

Maximizing Tire Life To maximize the wheel loader tire’s life, customers must first understand that each job site is unique and that some applications may tax the tire more than others. “A typical tire lasts between 2,000 and 3,500 hours, but it all depends on the application,” Stark said. “You have to consider what applications the operator will be using the machine in to determine if your tire will have longevity.” For instance, a tire that is used in rock or quarry applications may have a shorter life span than a tire used in sandy, dirt or concrete applications. The way an operator handles his machine also plays a part (This story also can be found on Construction Equipment in the tire’s longevity, Stark said. For instance, operators who Guide’s website at www.constructionequipmentguide.com.) spin their tires going into a pile could produce more tire cuts and also causing the tire to wear faster. Stark added that operators should perform daily maintenance checks, including monitoring tire air pressure, to maximize tire life. “If the operator has low tire air pressure it may put more pressure on the outside of the tire, creating problems later “Like the other models in our HL series, the on,” he said. “Owners also have to make sure they don’t have high of air pressure in the tire, either. If a tire is under- or HL955TM provides an exceptional operator too overinflated it may cause the wheel loader to burn more fuel, isn’t efficient.” environment, productivity enhancements and which Choosing the proper tire for the application can be confusing; however, with tips from product specialists and inforoperating efficiencies.” mation from an independent dealer, maximum tire longevity can be achieved. Corey Rogers For more information, visit DoosanEquipment.com.

HL955TM Increases Productivity HYUNDAI from page 100

Rogers, marketing manager, Hyundai Construction Equipment Americas. “Like the other models in our HL series, the HL955TM provides an exceptional operator environment, productivity enhancements and operating efficiencies.” The Hyundai HL955TM wheel loader, like other HL900 series models, delivers up to 5-percent greater productivity and 10-percent lower fuel consumption than previous 9A series models. HL900 series loaders achieve greater fuel economy as a result of such features as Hyundai’s Eco Pedal, programmable auto-engine shutdown (available with the smart key option) and Eco Gauge, according to the manufacturer. Improved Cab Design The large, quiet cab on the HL955TM wheel loader includes a 7 in. interactive touch-screen monitor, enhanced climate control, fully adjustable and heated air-ride seat, centralized control switches and significant in-cab sound reduction. The cab

Hyundai Construction Equipment North Americas

has been reconfigured for additional floor space and improved visibility. For added operator comfort, in-cab sound levels were reduced by 3 dB, making this one of the quietest cabs in the industry. An optional smart start ignition system for password- or Bluetooth key-enabled machine start also is available on the HL900 series machines. Ergonomically positioned operator switches, controls and other features make it easier to quickly access critical functions. An improved rearview camera delivers higher resolution and enhanced nighttime visibility.

(This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

Industry-Leading Warranties The Hyundai HL955TM is protected by Hyundai’s three-year, 3,000hour standard warranty and five-year, 5,000-hour structural warranty. Hyundai also includes three years of free access to its Hi-Mate remote management system which provides a variety of remote monitoring and diagnostic services. For more information, visit www.hceamericas.com.

(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

3 Tips for Maintaining Wheel Loader Tires

Always do a machine walk-around, paying close attention to the tires. No material should be sticking out of the tire. Inspect the sidewall of the tire, making sure there are no solid cuts on the tire. If there is a cut, make sure to get the tire fixed as soon as possible. Monitor tire air pressure on a daily basis.

Construction Equipment Guide • Wheel Loaders, Tool Carriers & Attachments Section • www.constructionequipmentguide.com • July 2, 2016 • Page 103

Ready y. Set. Save on o Kubota’s U Series Compact Excavators.

Martin Implement Sales, Inc. 18405 115th Avenue Orland Park, IL 60467 708/349-8430 Fax 708/349-4230 www.martinimplement.com

27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

Customer Instant Rebates going on right now!

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697

Long Term Low Rate Financing

2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650 Fax 815/464-6951

1st Choice Equipment LLC 124 N. Schmale Rd. Carol Stream, IL 60188 630/510-6050 Fax 630/510-6051 1305 Sentry Drive Waukesha, WI 53186 262/521-5802 Fax 262/521-5801

Corcoran, MN 888/479-4342 763/479-8200

Lano Equipment, Inc. Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310

kubota.com

ABC Equipment 29 Pearl Rd. Brunswick, OH 44212 888/572-3888 Fax: 330/220-4949 38525 Chester Rd. Avon, OH 44011 440/934-7368 www.abcequipment.com

Southeastern Equipment Co., Inc. 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868 4951 West 96th Street Indianapolis, IN 46268 317/872-4877 www.southeasternequip.com

Page 104 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS CrAnes Boom Cranes 2007 national 13110H, Boom, LMI load moment indicator, Fronts rear out & down outriggers, Used condition................ ................................$159,900. Aspen equipment Co. 952-888-2525

eXCAVAtors Hydraulic excavators 2012 Liugong CLg922D, Cab AC/Heat, Tier 3 Cummins QSB6-7 C155 Engine, 48'' heavy duty bucket, 20 hours, New ........................$125,000. team Boone 502-348-7573

Classified Rates:30 Words or Less for $40.00. Each Additional Word is $1.20. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

2012 Kobelco sK140sr LC, Cab w/ AC, 94HP, Tier 3, 24'' pads, 9'4'' stick, hydr. coupler, additional counterweight, pattern control, very good condition, 990 hours ..........$92,500. Illinois truck & equipment 815-941-1900 Kobelco sK140 Excavator, s/n 8425, Hyd. Cab, Generator, Grapple bucket, Runs well ...... ..................................$72,500.

Wheel Loaders Doosan DL550-5 Wheel Loader, s/n 10042, 7.5 Cy. Bucket, Runs well! 81 hrs. ...... ................................$440,600. gibson Machinery, LLC 440-439-4000

trUCKs Articulating trucks

gibson Machinery, LLC 440-439-4000

Moxy Mt31, s/n 730075, Articulated Dump Truck, Runs well! 2,929 hours ....$174,600.

LoADers

gibson Machinery 440-439-4000

Crawler Loaders 1978 CAt 955L, Crawler Loader w/ enclosed cab, Very good condition! ..........$17,000. ronson equipment Co. 219-696-5680

2009 Caterpillar 308D Cr Cab w/ AC, Mitsubishi 4M40TL 57.7HP diesel, 7'3'' stick, NMC Railway System Rail Gear, dymax tie inserter - grapple, Excellent condition, 719 hours ................................$137,500.

'08 John Deere 700JLgP Dozer, Cab w/ AC, 123HP diesel, 30'' pads, 11' 6-way blade, drawbar, very good condition ..........................$89,500.

Illinois truck & equipment 815-941-1900

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

Construction Association of Michigan (CAM) The mission of Construction Association of Michigan is to provide service, information and assistance to the construction industry. The Association exists to foster growth in the construction industry and encourage networking between members and their publics. CAM will act as a catalyst to promote and enhance profitability, efficiency and integrity within the industry for the benefit of association members. For further information: Website: http://www.cam-online.com; Email: marketing@cam-online.com; Address: 43636 Woodward, Bloomfield Hills, Michigan 48302; Phone: 248/972-1000. Michigan Construction News Coming Events: July 13, Wednesday – Michigan Infrastructure & Transportation Association, 2016 Metro Detroit Golf Outing, Twin Lakes Golf Club, Oakland Township. Contact: MITA, 517/347-8335. July 19, Tuesday – Construction Association of Michigan, Golf Outing, Links of Novi. Contact: CAM, 248/972-1000. July 27-31, Wednesday-Sunday – Michigan Infrastructure & Transportation Association, 2016 Summer Conference, Crystal Mountain Resort, Thompsonville. Contact: MITA, 517/347-8335. August 16, Tuesday – Construction Association of Michigan, Golf Outing, Fieldstone Golf Club, Auburn Hills. Contact: CAM, 248/972-1000. August 20, Saturday – Woodward Dream Cruise, “Cruise Into CAM,” CAM HQ, West Bloomfield. Contact: CAM, 248/972-1000. September 20, Tuesday – CAM Fall Sporting Clays, Hunters Creek Club, Metamora. Contact: CAM, 248/972-1000. AGC Safety & Health Conference Wednesday, July 27, 2016 to Friday, July 29, 2016 District of Columbia OAIMA (Ohio Aggregates & Industrial Minerals Association) The Ohio Aggregates & Industrial Minerals Association is the trade association in Ohio that represents all of the state’s mining operations except coal. OMMEP GOLF OUTING – July 18, 2016 – 9:00 AM to 11:00 AM For more information, please contact OAIMA at 1-800.OH.ROCKS or 614/4287954. Fax: 614/428-7919. STAFDA – Specialty Tools & Fasteners Distributors Association Welcome to STAFDA! STAFDA is an international educational association comprised of distributors, manufacturers, rep agents, and affiliates (trade press) serving the construction/industrial market. We have 2,500 members from across the globe and have been serving the Construction & Industrial Channel since 1976. UPCOMING EVENTS: STAFDA’s 40th Annual Convention & Trade Show Atlanta, GA November 6 – 8, 2016 Georgia World Congress Center Registration materials will be mailed to members the third week of June. You must be a member to attend! STAFDA has a series of training manuals, along with benchmarking surveys, and over 65 different programs to serve your needs! We encourage you to explore our website and learn more! STAFDA 500 Elm Grove Road – Suite 210 – P. O. Box 44 – Elm Grove, Wisconsin 53122 Phone: 800/352-2981 or 262/784-4774 Fax: 262/784-5059 Info@STAFDA.org TDWI Seminar in Boston 2016

Next Issue Closes: Thursday July 7

Wednesday, July 27, 2016 to Friday, July 29, 2016 Questions? info@tdwi.org Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ July 24-26, 2016 – APTA Sustainability & Public Transportation Workshop The 2016 APTA Sustainability & Public Transportation Workshop is scheduled for July 24-26, 2016, at the Westin Austin Downtown, 310 E. 5th Street, Austin, TX. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ August 14-16, 2016 – State Public Transportation Partnerships/Transit Midwest Conference The 2016 State Public Transportation Partnerships/Transit Midwest Conference is scheduled for August 14-16, 2016, at the Westin Crown Center, 1 E. Pershing Road, Kansas City, MO. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ August 28-31, 2016 – APWA Public Works Expo The 2016 APWA Public Works Expo (PWX) takes place on August 28-31, 2016 at the Minneapolis Convention Center, Minneapolis, MN. Maintenance Design Group http://maintenancedesigngroup.com/perspectives/events/ September 11-14, 2016 – APTA Annual Meeting The 2016 APTA Annual Meeting is scheduled for September 11-14, 2016, at the JW Marriott Los Angeles L.A. Live, 900 W. Olympic Boulevard, Los Angeles, CA. ASSOCIATED TRAINING SERVICES NEW FACILITIES GRAND OPENING DATE: FRIDAY, JULY 15, 2016 TIME: 9 AM to 3 PM FREE LUNCH 11 AM Why Attend This Event? See New Facilities and Training Grounds JCB, Case Construction, Terex Cranes, Manitou, Mazella Sponsored Classrooms Meet ATS Training and Management Staff Talk With Our Business Development Department Establish New Partnerships Ask About Our Specialized Training Options Meet with Equipment Manufacturers and Dealers Equipment Dealers and Manufacturers Will Be On Hand Recruits ATS Graduates For Your Company ATS Students and Graduates Will Be Available ASSOCIATED TRAINING SERVICES – OPEN HOUSE 7132 Elder Lane, Corner of HWY 151 & HWY VV SUN PRAIRIE, WI 53590 Dan Swiggum, 605/354-0721 www.operator-school.com TOWMASTER TRAILERS & TRUCK EQUIPMENT & EDUCATION EXPO Minnesota Municipal & Government Agencies and Plow Contractors Join us for the 2016 TOWMASTER TRAILERS & TRUCK EQUIPMENT & EDUCATION EXPO FREE!!! DATE: TUESDAY, JULY 12, 2016 TIME: 7:30 AM to 2:30 PM Factory Tours; Product Demonstrations; Truck Displays; Indoor Product Displays; Trailer Displays; Equipment Displays; Food & Prizes; Education Sessions: 7:45 AM – Force America SSC5100EX Operation; 8:45 AM - Force America SSC6100 Operation; 9:45 AM – KMI 3 Step Asphalt Repair. Registration required online at towmastertruck.com. TDWI Seminar in Dallas, TX 2016 DATA MINING AND PREDICTIVE ANALYTICS DATES: Monday, JULY 11; Tuesday, JULY 12; Wednesday, JULY 13; Thursday, JULY 14 SEMINAR LOCATION: Renaissance Dallas Hotel 2222 N Stemmons Fwy Dallas, TX 75207 MONDAY, JULY 11: TDWI Analytics Fundamentals

Would you like

YOUR COMPANY featured in Construction Equipment Guide?

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL? Construction Equipment Guide is THE Place to List It!

ONLY

$40

or go online to place your ad

470 Maryland Drive, PA 19034

You must have a classified print ad to do so.

Call 800-523-2200

If so, please contact us:

Fort Washington,

2 InsertIons In one regIon (northeast, southeast, Midwest, West) 30 words or less $1.20 additional per word over 30 For an additional $20 we can post your ad on our website in our online searchable database.

www.constructionequipmentguide.com/ pages/customer/classifieds.asp and place your ad through our website and we will contact you!

TUESDAY, JULY 12: TDWI Predictive Analytics Fundamentals WEDNESDAY, JULY 13: TDWI Data Visualization Fundamentals THURSDAY, JULY 14: Hands-on Data Mining If you register to become a Premium Member of TDWI at the time of your seminar registration, you can attend at TDWI Premium Member rates. Please contact us at 425/277-9201 or registration@tdwi.org. All non-member registrations for three or more days include a one-year TDWI Premium Membership. You may, however, decline Premium Membership on the registration form. TDWI Seminar in Salt Lake City, UT 2016 BUSINESS ANALYTICS DATES: Monday, JULY 25; Tuesday, JULY 26; Wednesday, JULY 27; Thursday, JULY 28 SEMINAR LOCATION: University Guest House & Conference Center 110 S Fort Douglas Blvd Salt Lake City, UT 84113-5036 MONDAY, JULY 25: TDWI Analytics Fundamentals TUESDAY, JULY 26: TDWI Predictive Analytics Fundamentals WEDNESDAY, JULY 27: TDWI Data Visualization Fundamentals THURSDAY, JULY 28: Data Storytelling: The New Horizon in Business Analytics If you register to become a Premium Member of TDWI at the time of your seminar registration, you can attend at TDWI Premium Member rates. Please contact us at 425/277-9201 or registration @tdwi.org. All non-member registrations for three or more days include a one-year TDWI Premium Membership. You may, however, decline Premium Membership on the registration form. NLICA – The Nebraska Land Improvement Contractors Association NEBRASKA LICA CONSTRUCTION EXPO & FIELD DAY Plan to Attend the 2nd Nebraska LICA Construction Expo and Field Day. DATE: THURSDAY, JULY 28, 2016 TIME: 9:00 AM to 5:00 PM SITE LOCATION: 18060 OLD CHENEY ROAD, WALTON, NE 68461 *Directions from Lincoln, NE: Travel East on US-34 E. Turn Right onto S 148th Street. Turn Left onto Old Cheney Road. THIS EVENT IS FREE TO THE PUBLIC!!! Contractors will have the opportunity to access multiple associates at once, with hands-on testing of equipment and the chance to see the latest innovations and products related to the industry. NLICA associate members are encouraged to participate in this event. For more information on this event, contact Nancy Dvorak, Event Coordinator at 402/693-2517 or nancy@prussexcavation.com. For additional information, you may also visit www.NELICA.org. 2016 National LICA SUMMER MEETING Missouri Land Improvement Contractors (MLICA) is hosting 2016 National LICA Summer Meeting CELEBRATING 75 YEARS OF STEWARDSHIP! DATES: JULY 19-23, 2016 PLACE: INTERCONTINENTAL HOTEL KANSAS CITY at the PLAZA 401 Ward Parkway KANSAS CITY, MO For more information contact 866/856-9717 or go to www.kansascityic.com. APWA PWX CONFERENCE 2016 DATES: AUGUST 28th – 31st, 2016 PLACE: MINNEAPOLIS, MINNESOTA The American Public Works Association (APWA) PWX Conference will be held from August 28th through August 31st, 2016 in Minneapolis. The PWX Conference was formerly known as the APWA Congress. The event is a networking and educational opportunity for public works professionals. If you would like more information on this Conference or if you have a question for the APWA-MN Chapter, kindly contact the APWA-MN Chapter by mail: APWA-MN Chapter, PO Box 27965, Golden Valley, MN 55427; TOLL FREE: 1-888-407-2650. Associated General Contractors of Minnesota (AGC of Minnesota) AGC of MINNESOTA SUMMER QUARTERLY MEETING WHEN: WEDNESDAY, JULY 13, 2016 WHERE: KITCHI GAMMI CLUB DULUTH, MINNESOTA CONTACT: Denise Woods dwoods@agcmn.org Phone: 651/796-2186

AGC OF MINNESOTA AGC OF MINNESOTA GOLF TOURNAMENT WHEN: FRIDAY, AUGUST 5, 2016 WHERE: STONEBROOKE GOLF CLUB 2693 CO RD 79 SHAKOPEE, MN 55379 CONTACT: DENISE WOODS DWOODS@AGCMN.ORG 651/796-2186 REGISTRATION IS AVAILABLE JUNE 2016. AGC OF MINNESOTA AGC OF MINNESOTA SPORTING CLAYS FUNDRAISER WHEN: MONDAY, AUGUST 29, 2016 WHERE: MINNESOTA HORSE AND HUNT CLUB 2920 E 220TH STREET PRIOR LAKE, MN 55372 CONTACT: DENISE WOODS DWOODS@AGCMN.ORG 651/796-2189 REGISTRATION IS AVAILABLE JULY 2016. Registration Open for 2016 Offsite Construction Expo SEPTEMBER 21 and 22 in Washington, DC Registration is now open for the 2016 Offsite Construction Expo. There is simply no greater opportunity to reach key partners in the offsite construction industry. The Offsite Construction Expo (OSCE) will feature exhibits from offsite construction contractors, traditional contractors that have integrated offsite methods, offsite factories, transportation companies, architects, engineers, BIM suppliers, materials suppliers, and consultants of all types of offsite construction processes. Additionally, eight case studies will be presented on the hour on the expo floor. Questions about this event??? Event staff can be contacted by phone: 434/2028180 or e-mail: info@hardimanwilliams.com. Event Location: Walter E. Washington Convention Center, 801 Mt. Vernon Place, NW, Washington, D.C. 20001. Phone: 202/249-3000. SIXTH ANNUAL SHALE INSIGHT TM CONFERENCE 2016 SHALE INSIGHT TM 2016 ENERGIZED WITH REGIONAL OIL & GAS PARTNERSHIP MSC, OOGA, WVONGA partnership advances stronger industry voice and collaboration Pittsburgh, PA / Columbus, OH / Charleston, W.VA. – The Marcellus Shale Coalition (MSC), the Ohio Oil and Gas Association (OOGA) and the West Virginia Oil and Natural Gas Association (WVONGA), are pleased to announce a joint partnership to host the Sixth Annual Shale Insight TM Conference. This industry-leading event will take place in the heart of the Marcellus and Utica Shale Gas Plays on September 21 and 22, 2016 at the David L. Lawrence Convention Center in Pittsburgh, PA. In addition to several keynote presentations, the conference will feature daily educational sessions exploring various technical and public affairsrelated topics. Registration is now open, offering special member and early bird rates. A variety of sponsorships offering comprehensive entitlements are available, including general session presentations, luncheons, networking events and other branding and marketing opportunities. for more information and to register for the conference, visit shaleinsight.com. WORLD DEMOLITION SUMMIT 2016 . Demolition event moves to the USA for the first time . Online registration is now open for event, taking place on 14 October, 2016 . Deadline for entries to World Demolition Awards is 30 June, 2016 An international line-up of expert speakers has been confirmed for this year’s World Demolition Summit (WDS), which takes place in Miami, Florida on 14 October – its first time in the USA. The Summit, always previously held in Europe, is established as one of the major annual international events for the demolition industry. More information and online registration is available at the conference website: www.khl.com/wds. Companies are also encouraged to enter the 2016 World Demolition Awards, which are the most prestigious awards for the worldwide demolition industry, judged by a panel of independent experts. There are 11 categories and the awards are free to enter. The deadline for entries is Friday, 30 June. The entry forms can be downloaded from the event website at www.khl.com/wds.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 105

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 37 states ............................................................Call

Summit Supply LLC East, West & South Warehouses 888-888-1248 • sales@summittracks.us 13-14 TM

2010 332D John Deere 89 HP, 202 Hrs, 2 Speed 2014 Bobcat S570 Trade In, Cab & Heat, AC, 2 Speed, 219 Hrs, Super Clean ...........Only $37,500 A/C Joystick Controls .................................$44,900 Call MN Equipment 763-428-4107 14-15 PK Call Brian 866-649-6853 14-15 PK

2004 Takeuchi TL140, 2546 Hrs, Cab & Heat ............ ..........................................................................$26,166 Top Notch Equipment, Inc. 888-824-6559 13-14 PK

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS & TRACK LOADERS, The most trusted brand in America brings you quality tracks for your specific make and model. Call McLaren 888-492-4230 14-15 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning; less ground damage; fully rebuildable; interchangeable shoe types. Call McLaren 888-492-4230 14-15 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regular pneumatic tires; rims included; same day shipping; various tire sizes available. Call McLaren 888-492-4230 14-15 DH

2012 Liebherr L528 2 Plus 1 Loader, 134HP John Deere Diesel, Hyd. Disconnects, 18,740 LB Tipping Point, 28,000 Lb Operating Weight, 3440 Hrs, Super Smooth Machine, Completely Reconditioned, Looks & Operates Like New! SN: VATZ0660AZ301908012........ .......................................................................$105,000 Jerry/Justin 330-878-6630 13-14 EB www.HooversTruck.com

2008 Link-Belt 210 X2, Cab w/AC, 157 HP Isuzu T3 Diesel....................................................$81,500 14-15 JM Call Steve 262-373-2151

2014 Takeuchi TL10, OROPS, 92HP T4i Kubota Diesel, 2 Speed Travel ...............................$44,390 Call Steve 262-373-2151 14-15 JM

1995 Fiatallis FR130.2, Cab w/Heat, 139HP Turbo Diesel..........................................................$24,750 Call Steve 262-373-2151 14-15 JM

2008 Volvo SD25DTF, OROPS, 42” Wide Smooth Drum...........................................................$29,700 Call Steve 262-373-2151 14-15 JM

2010 CAT 305C CR, EROPS, 2200 hours, Hyd. thumb, new tracks, Blade ............................$CALL Courts Machinery • 507/678-2752 14-15 PK

2009 Cat 420E, County Machine, Cab, A/C, 4-in-1 Loader ........................................................$59,500 Call Mark 785-823-6378 14 JM

2005 FECON FTX90L with Rear Winch, 1450 Hrs ....................................................................$38,000 14 JM Call Mark 785-823-6378

2004 Cat 330CL Excavator, 9132 Hrs, 247 HP C9 Diesel, 12’9” Stick, 60” Bkt, Extra CounterWeight for Heavy Lifting, Cab w/Heat & AC, AM/FM and Fresh Epoxy Paint. Above Average Leak Free Machine. A Must See ...Asking $75,000 Call Pieper Inc 319-372-2276 14-15 JM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Mark Sladoje for Sizes & Pricing 13-14 EB 614-395-4064

2006 Cat XQ-80 Generator, 8146 Hrs ...........$19,000 Albert Medcalf or Marcela Newman 14-15 EB 502-456-4050

2010 Bobcat E80, 3515 Hrs, 57 HP, 2-Speed Drive, 18” Digging Bucket, 24” Digging Bucket .........$52,000 Call George 219-696-8911 14 JM

2014 Terex TSV70 Skid Steer Loader, Vertical Path, 74hp, 2-Speed, Hyd-Quick-Tach 129” Hinge ........$36,600 13-14 EB Call Tania 614-443-9751 x237

Page 106 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $115 • Color $165

2006-2010 Ingersoll Rand DD-118HF & DD-138HF 1999 Dynapac SP-CC-102 Dual Drum Vibratory 2012 Volvo MT2000 Milling Machine, Cummins Roller, #7137 ...............................................$6,500 610HP Tier 3 Dsl, 86” Keystone Cutter ....$275,000 Compactors, Various Units to Choose From! 14 JM 14 JM 800-283-1336 800-283-1336 14 JM 800-283-1336

2009 Volvo MW500 Milling Machine, 20” Wide Cutter, Deutz Diesel Eng, Rear Conveyor.$115,000 14 JM 800-283-1336

Doosan DL 220, 380 Hrs, 3 Yd Ride Control, Quick Coupler ..........................................................$135,000 Caleb Hinkkanen 800-456-4005 Ext. 143 13-14 PK

2011 John Deere 850K - WLT, s/n 199818, 5670 Hrs, Cab, A/C, 3 Position Ripper w/2 Shanks, New Chains & Sprockets, 13” Wide 6-Way Blade .............$185,000 14 JM Call David 219-696-5680

2012 Case DV202, s/n DDDDV202NCTF2016, 1175 Hrs, ROPS, RIght Side Drive Lever, 47” Drum ....................................................................$27,500 14 JM Call Ken 630-878-8396

Case 410, s/n N8M494216, 1455 Hrs, ROPS, Manual Coupler, New Engine @ 1415 Hrs, 10x16.5 Tires, 66” Bkt .................................$16,000 14 JM Call Steve @ 630-878-8765

2007 Ditch Witch XT1600, 221 Hrs, Tracks at 90%, Excellent Condition ................................$49,500 Call Tim 630-665-5600 14 JM

Repairable 2011 Schwarze RP6 Road Patcher, Case 580L, s/n JJG0247133, Cab w/Heat, Two Cummins ISB 6.7L, Auto, only 16k Miles, 33,000 GVWR, Light Interior Dash Fire, Runs Good ........... Lever, Ext-Hoe, 4WD, 18” Backhoe Bkt, 82” Front ............................Price Reduced Asking $32,600 Bkt ..............................................................$24,500 14 JM Call Steve @ 630-878-8765 14-15 EB Call Dave 866-241-2110

2009 Grove YB 7722XL, 22 Ton Carry Deck, Cummins Engine With Scrubber, Enclosed Cab, 67’ Main Boom, 17’ Jib, 4 Wheel Drive , Auxiliary Light Package, Block, Ball, Cleveland Ohio ..CALL Call Andy Forepaugh 216-316-1511 13-14 EB

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $115 per ad, $50 additional for color.

2013 Kobelco CK 100G, 5300 Hrs, Original Owner, 150 Main Boom, Block, Ball, Certified ......... ..........................................................Call for Price Call Andy Forepaugh 216-316-1511 13-14 EB

• Your ad will run for two consecutive issues in 1 region.

SEE YOUR BARGAIN Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States. For more information, call Construction Equipment Guide today at

800/523-2200

AD IN

COLOR

ONLY $50 EXTRA FOR TWO INSERTIONS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 107

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED: FINAL DRIVE, 120B CAT P/N 1R5123 CONTACT: WAYNE PH: 912-682-4536 EMAIL: DRYBRANCHVILLAGE@GMAIL.COM FAX: 912-239-5594 –––––––––––––––––––––––––––––––– WANTED: BULLDOZER D6MXL WITH RIPPER UNDER 6000 HOURS ONLY I NEED 2 NOT ADVERTISED USER NEAR NEW YORK UNDER 25000US NO JUNK CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K WHEEL LOADER 4 YD GENERAL PURPOSE BUCKET CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: NEEDED: CHALLENGER 865 OR 875 UNDER 4000 HRS CONTACT: GREG MARTIN EMAIL: MACHINERYMART@ MIDOHIO.TWCBC.COM –––––––––––––––––––––––––––––––– WANTED: PEGSON XA / XR 400 TRACK JAW CRUSHER LATER MODEL, LOW HOUR EAST COAST LOCATION PREFERED CONTACT: RICHARD 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED: KOMATSU HD 1500 NEED FRONT WHEEL LH - RH FOR A KOMATSU HD 1500 OFF HIGHWAY TRUCK. FRONT SUSPENSION/SPINDLE + BRAKE ASSEMBLY + WHEEL HUB ASSEMBLY CONTACT: ORIEL BASTIDA PH: 005114512562 EMAIL: ORIEL@CCI.PE FAX: 005114519923 –––––––––––––––––––––––––––––––– WANTED: YANMAR Y10W OR Y10W-1 ANY CONDITION RUNNING OR NOT RUNNING OR FOR PARTS ONLY. CONTACT: GEORGE VARSHOCK PH: 619-933-7806 EMAIL: GVARSHOCK@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: WE ARE LOOKING TO PURCHASE CAT 950 , WELL MAINTAINED ORIGINAL PAINT YEAR 1975-UP IMMEDIATE PURCHASE CONTACT: DAW ELGHABER PH: 407-926-0351 EMAIL: INFO@GCIGROUPLLC.COM FAX: 407-926-0351 ––––––––––––––––––––––––––––––––

WANTED: EXCAVATOR CAT 345CLC BETWEEN 6000 - 7000 HOURS. NO PAST REAL HOURS ON THE FRAME AND METER NEAR NEW YORK. ONLY CONTRACTORS NOT ADVERTISED CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADERS AND MOTOR GRADER WE ARE LOOKING TO BUY BELOW MACHINES. CAT WHEEL LOADER 936E, 950B, 950E, 966D, 966F, 966H, 972G AND 970F. CAT MOTOR GRADER: 140G, 140H AND 14H I BUY RUNNING OR NON RUNNING MACHINE. PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: RIZ SUNESARA PH: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATOR EX200 AND EX400 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: STEVE PH: 713-659-0593 EMAIL: STEVE@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: WE ARE LOOKING TO BUY DYNAPAC ROLLER CA25 AND CA251 IF YOU HAVE ANY FOR SALE PLEASE EMAIL ME PICTURES AND DETAILS. CONTACT: SAM SUNESARA PH: 713-855-6170 EMAIL: SALES@MEGAEQUIPMENTS.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR CAT 637-OR 657 D,E,F...SCRAPERS....NOT COAL HAUERS....REMAINED MACHINES PREFERRED..... CONTACT: DALE PH: 360-551-9778 EMAIL: DALE.SALES.HEH@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: KOMATSU 380 JG-1, 580 OR 550 TRACK JAW CRUSHER LATER MODEL, LOW HOUR, WORK READY USA LOCATION CONTACT: RICHARD PH: 603-828-6100 EMAIL: CMISOLD1@COMCAST.NET ––––––––––––––––––––––––––––––––

WANTED: REQUIRED MACHINES FOR PURCHASE COAL BURNING ELECTRICAL PLANTS 50 TO 100 MW IN 50 HZ. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES & PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@ AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: 6" TO 12" L39 KUBOTA BACKHOE BUCKET BUCKET & A HYDRAULIC THUMB FOR L39 BACKHOE CONTACT: RALPH STEWART PH: 662-327-3552 EMAIL: RALPHCSTEWART@ BELLSOUTH.NET FAX: 662-327-3552 –––––––––––––––––––––––––––––––– WANTED: EQUIPMENT WANTED TO BUY WE BUY HEAVY EQUIPMENT AND TRUCKS! LOOKING TO BUY SKID STEERS AND MINI EXCAVATORS CONTACT: JOE PH: 570-250-5559 EMAIL: JOE@JOEDIRTMACHINERY.COM –––––––––––––––––––––––––––––––– WANTED: FORKLIFTS WE ARE LOOKING TO PURCHASE YOUR WORKING AND NON WORKING 80'S 90'S AND LATE MODELS. ALL MAKES AND MODELS!! CASH ON THE SPOT!!!! CONTACT: JOHN PH: 832-900-5824 EMAIL: JNICHOLAS.NICHOLAS MACHINE@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: BACK HOE REAR BUCKET REAR BUCKET FOR NEW HOLLAND 555D 1996 MODEL CONTACT: JOHN EMAIL: JRELKHUNT@AOL.COM –––––––––––––––––––––––––––––––– WANTED: DEERE 644K JRB QC DEERE 644K JRB QC GP BUCKET AND FORKS CONTACT: FRANK @ GROFF TRACTOR PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: NEED EXCAVATOR EX 5600 HITACHI WANT TO BUY NOW EXCAVATOR HITACHI EX 5600 «35YARD« BETWEEN 5000 AND 12000 HOURS REAL HOURS ON THE METERS AND FRAME NOT ADVERTISED IN THE WORLD USER ONLY OR REPOSES BANK CONTACT: JEAN MAURICE BOUTIN PH: 1-450-346-8975 OR 1-514-386-8975 EMAIL: JEANMAURICEBOUTIN@ VIDEOTRON.CA ––––––––––––––––––––––––––––––––

WANTED: CAT WHEEL LOADERS I AM LOOKING TO BUY RUNNING OR NON RUNNING CAT WHEEL LOADERS , MOTOR GRADER AND DOZER. CONTACT: RIZ SUNESARA PHONE: 832-528-0786 EMAIL: RIZ@MEGAEQUIPMENTS.COM FAX: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: DORNIER LOOMS 30004000MM PREFER MODELS PTV/PTS FOR TECHNICAL TEXTILES. 3 LOOMS NEEDED. IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON PHONE: 864-574-0404 EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– NEEDED BULLDOZER D10N AND D11N ENC CAB WITH RIPPER GOOD UNDERWANTED: LOADER FOR 255 MF CARRIAGE, USA WELCOME EUROPE I LIVE IN CENTRAL KY MUST BE GOOD PRICE. I NEED 5 UNIT. CONTACT: HARRY CONTACT: JEAN MAURICE BOUTIN PH: 270-402-5781 PHONE: 1-450-346-8975 OR EMAIL: RICEPRESTON75@YAHOO.COM 1-514-386-8975) –––––––––––––––––––––––––––––––– EMAIL: WANTED: SMALL DOZER JEANMAURICEBOUTIN@VIDEOTRON.CA SMALL USED DOZER WITH 3PT HITCH –––––––––––––––––––––––––––––––– LOOKING FOR 16" RUBBER PADS OR AND 540RPM PTO 16" CLIP ON PADS FOR A CAT 305 MIDI CONTACT: TONY EXCAVATOR - HWJ03223. PH: 217-773-2670 CONTACT: MARCEL EMAIL: TONYMATHEWSON@ PHONE: 519-686-1123 YAHOO.COM EMAIL: –––––––––––––––––––––––––––––––– SALES@MARCELEQUIPMENT.COM WANTED: SKID STEERS AND MINI –––––––––––––––––––––––––––––––– EXCAVATORS. WANTED: WIRTGEN MILLING MACHINE CONTACT: JOE DIRT MACHINERY WE NEED TO BUY WIRTGEN MILLING PHONE: 570-250-5559 MACHINE W2100 AND W2200 2000 AND EMAIL: JOE@JOEDIRTMACHINES.COM UP WITH MOBA CONTROLLER, IF YOU FAX: 570-364-5200 HAVE ANY FOR SALE PLEASE EMAIL –––––––––––––––––––––––––––––––– ME PICTURES AND DETAILS. WANTED: WANT BULLDOZER CONTACT: SAM SUNESARA PHONE: 713-855-6170 WANT TO BUY BULLDOZER D9N ENC CAB WITH RIPPER D9R, ENC CAB WITH EMAIL: SALES@MEGAEQUIPMENTS.COM RIPPER D10R ENC CAB WITH RIPPER FAX: 281-727-0415 KOMASTU 155AX-6 SS RIPPER 2012 –––––––––––––––––––––––––––––––– AND UP NO PAST 4000 HOURS ALL WANTED: KOMATSU D37-P-2 UNIT FROM USER NOT ADVERTISED TRACK CHAINS AND SPROCKETS IN CONTACT: JEAN MAURICE BOUTIN GOOD COND PHONE: 1-450-346-8975 OR CONTACT: TOM 1-514-386-8975 EMAIL: TSDREDGING@MSN.COM EMAIL: JEANMAURICEBOUTIN@ –––––––––––––––––––––––––––––––– VIDEOTRON.CA WANTED: TOOLCAT (USED) MADE BY –––––––––––––––––––––––––––––––– BOBCAT WANTED: WE BUY OILFIELD EQUIPCONTACT: MARC JONES MENT WORKING OR NON WORKING PH: 6086954397 EMAIL: MJOSYENE@GMAIL.COM WE PAY TOP DOLLAR. –––––––––––––––––––––––––––––––– CONTACT: JAMIE MILLER WANTED: BULLDOZER D8T WITH 45000 PHONE: 713-256-6006) HOURS EMAIL: JMILLER.SOUTHERNMANWANT TO BUY USA FROM USER 2 CHINE@GMAIL.COM BULLDOZER D8T ENC CAB SEMI U –––––––––––––––––––––––––––––––– WITH RIPPER WITH 45000 HOURS AND WANTED: DEERE 644K WHEEL UP WITH UNDERCARRIAGE POOR LOADER 4.0 YD. G.P. BUCKET MUST BE ALL PIECES MUST BE CONTACT: FRANK @ GROFF TRACTOR RUNNING I NEED 2 FAST PHONE: 1-800-33-GROFF CONTACT: JEAN MAURICE BOUTIN EMAIL: FRANKHORAN@ PH: 1 450 346 8975 OR 1 514 386 8975 GROFFTRACTOR.COM EMAIL: FAX: 732-780-3618 JEANMAURICEBOUTIN@VIDEOTRON.CA –––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––

WANTED: CAT DRIVE MOTOR-PART # 1390848 CAT DRIVE MOTOR (ALSO CALLED A TRAVEL MOTOR), FOR A CAT EL300B EXCAVATOR. THE CAT PART # IS 1390848. CONTACT: NICK PH: (304) 232-1333 EMAIL: WVCOINC@AOL.COM FAX: (304) 233-1333 –––––––––––––––––––––––––––––––– WANTED: DEERE 644K DEERE 644K 4.25 CUBIC YARD G.P. BUCKET CONTACT: FRANK PH: 800-33-GROFF EMAIL: FRANKHORAN@ GROFFTRACTOR.COM FAX: 732-780-3618 –––––––––––––––––––––––––––––––– WANTED: CAR HAULER TO HAUL 8' WIDE X 20' SHIPPING CONTAINERS LOOKING FOR A CAR HAULER THAT HAS A FLATBED THAT EXTENDS DOWN AND OUT. I USED TO USE ONE OF THESE TO HAUL 8' X 20' MOBILE STORAGE / SHIPPING CONTAINERS. THE THING IS... THE BED HAS TO BE 102" WIDE TO ACCOMODATE THE 96" WIDE SHIPPING CONTAINER! CONTACT: SHANE TERRY PH: 951-219-4210 EMAIL: SHANETERRY27@YAHOO.COM FAX: 951-468-4522 –––––––––––––––––––––––––––––––– WANTED: CEDAR RAPIDS REMIX ASPHALT PAVER CONTACT: JD BENTLEY PH: 660-651-2432 EMAIL: SUSANBENTLEY1962@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: CAT 938G QUICK ATTACH BUCKET CAT 928G QUICK ATTACH BUCKET CONTACT: DEBBIE PH: 4064421399 EMAIL: SLICKROCK08@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: REQUIRED MACHINES FOR PURCHASE DAVIS & FURBER WOOLEN CARD. MUST BE 2500MM (100 INCHES). IF YOU HAVE ANY, PLEASE SEND FULL DETAILS, PICTURES AND PRICE. CONTACT: VICTOR LEBRON PH: 864-574-0404 EMAIL: APESALES@AMERICANPLANTANDEQUIPMENT.COM FAX: 864-576-7204 –––––––––––––––––––––––––––––––– WANTED: WALKING DRAGLINE WALKING DRAGLINES OF 50M3 BKT CAPACITY AND BIGGER. CAT,MARION,BE ETC CONTACT: ALEEM BAKSH PH: +64 211263938 EMAIL: GCTLTD@XTRA.CO.NZ ––––––––––––––––––––––––––––––––

Page 108 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Syracuse, NY Sat., July 16, 2016 For: Very Large Late Model Rental Return Auction • Dallas, TX Tues., July 19, 2016 @ 1PM For: RENTALS! Construction Equipment & more • Queretaro, Mexico Fri., July 29, 2016 For: Late Model Construction Equipment & more • Chicago, IL Fri., July 29, 2016 For: Snow Extravaganza Phase 1 • Racine, WI Sat., July 30, 2016 For: Rental Fleet Construction, Logging & Agricultural Equip. • Webster, MA Sat., August 6, 2016 For: Liquidation Construction Equipment • Orlando, FL Wed., August 10, 2016 For: Rental Return of Late Model Construction Equipment • Hagerstown, MD Thurs., August 11, 2016 For: Late Model Construction Equipment & more • Williamsport, PA Fri., August 12, 2016 For: Large Job Completion of Construction Oilfield Equipment • Atlantic City, NJ Sat., August 13, 2016 For: Snow Extravaganza Phase 2 • Watertown, NY Sun., August 14, 2016 For: Estate Auction, Construction Equipment & more • Johnstown, PA Sat., August 20, 2016 For: Late Model Construction Equipment & more • Las Vegas, NV Sat., September 10, 2016 For: Large Job Completion & Rental Returns Auction • Auburn, ME Sat., September 17, 2016 For: Retirement Liquidation, Late Model Construction Equipment • Rochester, NY Sat., October 8, 2016 For: Large Municipal Construction Equipment & more • Houston, TX Fri., October 14, 2016 For: Special Large Construction Equipment & more • Chicago, IL Sat., October 15, 2016 For: Snow Extravaganza Phase 3 RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • Kansas City, MO Wed., July 13, 2016

• Gillette, WY Tues., July 19, 2016 • Fort Worth, TX July 20 - 21, 2016 • Manchester, NH Tues., July 26, 2016 • Albuquerque, NM Wed., July 27, 2016 • Elkview, WV Wed., July 27, 2016 • Springfield, MO Wed., August 17, 2016 • Columbus, OH Thurs., August 18, 2016 • Williston, ND Fri., August 18, 2016 BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • ONLINE ONLY July 6, 2016 • ONLINE ONLY July 13, 2016 • ONLINE ONLY July 20, 2016 • ONLINE ONLY July 27, 2016 • ONLINE ONLY August 3, 2016 DAVIS AUCTIONS, INC. www.davisauctionsinc.com 203-758-4087 • Prospect, CT Sat., September 17, 2016 For: Construction Equipment • Prospect, CT Sat., December 3, 2016 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768 AL: 334-693-2540 • Philadelphia, MS July 20 - 21, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS September 14 - 15, 2016 For: Huge 2-Day Public Auction • Philadelphia, MS November 16 - 17, 2016 For: Huge 2-Day Public Auction EQUIFY AUCTIONS, LLC www.equifyauctions.com 888-535-8218 • Sealy, TX Thurs., July 14, 2016 For: Heavy Machinery, Equipment & Truck Auction

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE

• Marietta, PA Fri., August 26, 2016 For: Truck, Trailer & Equipment

• Lansing, MI Sat, July 16, 2016 For: Heavy Vehicles & Equipment

• Marietta, PA Fri., October 14, 2016 For: Truck, Trailer & Equipment

• South Beloit, IL Sat, July 23, 2016 For: Heavy Vehicles & Equipment

• Marietta, PA Fri., December 9, 2016 For: Truck, Trailer & Equipment HOUSBY AUCTIONS www.housby.com 866-218-6266 • ONLINE ONLY July 13, 2016 • ONLINE ONLY July 27, 2016 • ONLINE ONLY August 10, 2016 • ONLINE ONLY August 31, 2016 • ONLINE ONLY September 14, 2016 • ONLINE ONLY September 28, 2016 • ONLINE ONLY October 12, 2016 • ONLINE ONLY October 26, 2016 HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Souderton, PA Wed., July 20, 2016 For: Surplus Liquidation Rorvik General Contracting, LLC I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Foley, MN Fri., September 9, 2016 For: Heavy Equipment • Foley, MN Fri., December 2, 2016 For: Heavy Equipment

• Charlotte, NC Thurs., July 28, 2016 For: Heavy Vehicles & Equipment • Shrewsbury, MA Sat, August 6, 2016 For: Heavy Vehicles & Equipment • Philadelphia, PA Sat, July 20, 2016 For: Heavy Vehicles & Equipment • Salt Lake City, UT Thurs., August 25, 2016 For: Heavy Vehicles & Equipment • Rome, NY Sat, July 27, 2016 For: Heavy Vehicles & Equipment JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kent, WA Thurs., July 7, 2016 For: Tri-State Construction, Inc. • Sutherlin, OR July 13 - 14, 2016 For: Sawmill Equipment & Supplies

• Seven Valleys, PA Tues., August 9, 2016 For: Tractor, Farm & Construction Equipment • Seven Valleys, PA Tues., September 13, 2016 For: Tractor, Farm & Construction Equipment PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com 860-642-4200 • Griswold, CT Fri., July 8, 2016 For: Complete Dispersal Auction P&J Tire and Auto, LLC • North Franklin, CT August 5 - 6, 2016 For: Major Public Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

• Denver, CO Wed., September 14, 2016 For: Construction Equipment • Denver, CO Wed., November 9, 2016 For: Construction Equipment RTI AUCTIONS www.teitsworth.com 585-243-1563 • Seneca Falls, NY August 11 - 12, 2016 For: Trucks, Large Construction Equipment & more STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • Timed Online Auction July 6 - 13, 2016 For: Ag, Construction Equipment, Trucks & more • Litchfield, MN Tues., July 26, 2016 For: Secured Party Construction Auction • West Fargo, ND Wed., August 3, 2016 For: Aglron West Fargo Event TIM WEAVER AUCTION SERVICE www.auctionzip.com 717-354-9524 • Palm, PA Fri., July 8, 2016 For: Stonewood Contracting Liquidation Auction

• ONLINE ONLY Thurs., July 14, 2016 For: Construction Equipment

UTILITY AUCTIONS www.utilityauctions.net 302-530-9103

• ONLINE ONLY Thurs., July 21, 2016 For: Truck & Trailer Auction

• Wilmington, DE Fri., August 26, 2016 For: Construction, Utility & Forestry Equipment

QUAKER CITY AUCTIONEERS INC. www.quakercityauction.com 215-426-5300

• Kenmore, WA Sat., December 3, 2016 For: Heavy & Contractors Equipment & Vehicles

• ONLINE ONLY July 6 - 15, 2016 For: Multi-Contractor Auction

• Brooklyn, MS August 5 - 6, 2016 For: Early Fall Public Auction

• Portland, OR Wed., July 27, 2016 For: Heavy Equipment & Commercial Truck Auction

• Seven Valleys, PA Tues., July 12, 2016 For: Tractor, Farm & Construction Equipment

• Kenmore, WA Sat., October 1, 2016 For: Heavy & Contractors Equipment & Vehicles

• Houston, TX Tues., September 20, 2016 For: Unreserved Public Auction

• Livingston, LA July 28 - 30, 2016 For: Summer Construction, Truck & Farming Equipment

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811

• ONLINE ONLY Thurs., July 28, 2016 For: Construction Equipment

IronPlanet AUCTIONS www.IronPlanet.com 888-433-5426

J. STOUT AUCTIONS www.jstoutauction.com 360-567-8154

• Pelzer, SC Thurs., September 29, 2016 For: Construction Equipment, Trucks, Trailers & more

• Kenmore, WA Sat., July 30, 2016 For: Heavy & Contractors Equipment & Vehicles

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

HENDERSON AUCTIONS www.hendersonauctions.com 225-686-2252

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 864-947-7888

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., September 10, 2016 For: Construction Equipment • Lebanon, TN Sat., December 3, 2016 For: Construction Equipment

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Princeton, MN Sat., September 17, 2016 For: Construction Equipment, Truck & Trailer Auction • Princeton, MN Sat., December 10, 2016 For: Construction Equipment, Truck & Trailer Auction YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Ashland, KY Thurs., July 7, 2016 For: Construction Equipment

JOEY MARTIN AUCTIONEERS www.joeymartinauctioneers.com 864-940-4800

ROLLER AUCTIONEERS www.rollerauction.com 866-515-1668

• Ashland, OH Thurs., September 22, 2016 For: Construction Equipment

• Villa Rica, GA Wed., September 21, 2016 For: Heavy Equipment Auction

• Denver, CO Wed., July 13, 2016 For: Construction Equipment

• Darlington, PA Thurs., November 17, 2016 For: Construction Equipment

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 109

www.IronPlanet.com 1.888.433.5426

Page 110 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 111

Unreserved Unr reserrved p public ublic equipment auctions FFast, ast, flexible fleexxible le leasing asing and fin financing ancing aavailable vailable – u up p tto o 100%, $0 do down wn

2012, 2010 & 2007 Caterpillar 730 6x6 | Kansas City

2007 Caterpillar D8T | Kansas City

2013 Soilmec SR20H | Fort Worth

2010 Caterpillar 345DL | Kansas City

2012 Volvo BL70B 4x4 | Fort Worth

2016 Choice 355DN 55 Ton | Fort Worth

2015 Volvo L70G | Fort Worth

Equipment includes

Bid in person or online

570+ excavators, 270+ crawler tractors, 270+ loader backhoes, 140+ articulated dump trucks, 460+ wheel loaders, 210 lowboys, 40+ drills & much more

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

Ju July ly 13 (W (Wed) ed) 8 am

Ju July ly 20–2 20–211 (W (Wed–Thu) ed– –Thu) 8 am

Financing & leasing available

Location

1800 W. Old 40 Hwy, Odessa, MO 64076

6050 Azle Avenue, Lake Worth, TX 76135-2603

More items added daily Call aboutt selling: 816.633.4096

More items added daily Call about selling: 817.237.6544

Up to 100% financing, with no money down.

Kansas Ka nsas City, City, M MO O FFort ort Worth, Worth, TX

rbauction.com See complete listing gs at rbauction.com Auctioneer Auctioneer Chad Chad M. Johnson # 17668 OAC. OAC. Terms Terms & conditions conditions apply. apply. See See rbauction.com/financing. rbauction.com/financing.

Page 112 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 2,100 Bidders Participate in Ritchie Bros. Sale

ore than 2,100 bidders participated online and in person at Ritchie Bros.’ multi-million dollar unreserved public equipment auction in Minneapolis, Minn., on June 17. Bidders came from 40 countries, including 47 states. Approximately 68 percent of the equipment in the auction was sold to out-ofstate buyers, from as far away as Bolivia, Spain and Lebanon. Online bidders purchased close to 60 percent of the equipment sold (by dollar value). More than 1,600 equipment items and trucks were sold in the auction, including more than 45 wheel loaders, 35 compactors, 20 excavators, 55 aerial work platforms, 150 truck tractors, 125 trailers and more. (This story also can be found on More than 1,600 equipment items Construction Equipment Guide’s website at and trucks were sold in the aucwww.constructionequipmentguide.com.) tion, including more than 45 CEG

wheel loaders.

The Ritchie Bros. facility in Minneapolis, Minn. Greg Highsmith conducts the auction.

Rachel Olson (L) and Genea Rissell, administrative assistants of Ritchie Bros., greet customers and help them register for the auction.

More than 2,100 bidders participated online and in person at Ritchie Bros.’ multi-million dollar unreserved public equipment auction.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 113

Page 114 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

To Enter This Giveaway: 1 Click the Register Now banner at www.BuyJMAOnline.com 2 Register online or live for any of our auctions held June 1–August 1, 2016

NEW! with Full

1-844-450-6200 www.BuyJMAOnline.com

Warranty

MSAL 1255, SC 4283, AL 5287, FL AU4483, TX 17188, LA 1756 NC 9730, VA 2907004240, GA AUNR004103, KYRP3843 See Website For Full Terms and Conditions

Find us on social media!

HUGE 2-DAY PUBLIC AUCTION Selling All Types of Construction Equip., Heavy-duty Trucks, Trailers, Farm Tractors, Logging Equip., Support Equip., Vehicles & More

Wednesday, July 20th & Thursday, July 21th • 9am

I.R.A.Y. Companies is pleased to offer professional appraisal services. Our Certified Appraiser Services are laddered and can be customized to suit your individual needs. • Formal Appraisal: We fully inspect the equipment and provide a professionally prepared document including pictures, serial numbers, and descriptions.

1042 Holland Ave • Philadelphia, Mississippi 39350

Phone: 601.656.9768 • Fax: 601.656.0192 10% Buyers Fee on the first $4500 of each lot and then a 1% Buyer Fee on the remaining balance of each lot.

Consignments are Now Being Accepted for this HUGE 2-Day Auction. CALL TODAY !!

2007 Bobcat 325G

Phone: 601.656.9768 Fax: 601.656.0192 2014 Cat D5K2

1042 Holland Ave • PO Box 1248 Philadelphia, MS 39350 sold@deancoauction.com

bid live ONLINE

Auctioneers: Donnie W. Dean, MS Lic. 733 & Wes Dean, MS Lic. 1322

The “It’s Only Another Beer” Black and Tan 8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients. Add 1 totalled vehicle. Never underestimate ‘just a few.’ Buzzed driving is drunk driving.

The following options give you a market price at a valued rate. • Fax or E-mail Appraisal: You submit details of the equipment and we fax or e-mail you an appraisal report. • Desktop Appraisal: This appraisal is based on our phone conversation. No written appraisal is provided, only a value! Desktop appraisals start as low as $25 per unit! Call today for a free appraisal quote!

877-968-7230 www.iraymn.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 115

Unreserved public equipment auction Fast, flexible leasing and financing available – up to 100%, $0 down

2 of 3 – John Deere 700J LGP

2 of 8 – Caterpillar 572G

3 – Caterpillar 583H

Darby 620

Caterpillar 572R

2011 John Deere 750J LT

Caterpillar D6H XR

1 of 4 – Caterpillar IT28B

2011 John Deere 250G LC

American Augers 24 In.

Peterbilt 378 4000 Gallon

2 – Caterpillar TH350B 6600 Lb 4x4x4

Elkview, West Virginia

July 27 (Wednesday) 9 am

Equipment includes

Bid in person or online

Financing & leasing available

Location

Pipelayers, tack tractors, crawler tractors, wheel loaders, hydraulic excavators, boring machines, truck tractors, trucks, trailers & much more

▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

Up to 100% financing, with no money down.

2454 Little Sandy Rd., Elkview, WV 25071

On-site inspection hours

More items added daily Call about selling: 919.764.1900

Mon–Fri, 8 am–5 pm

See complete listings at rbauction.com Kevin L. Perry License # 1763, James L. Valentine License # 1764

Page 116 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GovPlanet Direct…

New Interface…

IronPlanet Introduces Self-Listing Purple Wave Service to Public Sector Marketplace Announces Site Enhancements

IronPlanet, a leading online marketplace for selling and buying used equipment and other durable assets, introduced GovPlanet Direct, a new self-listing service as part of its marketplace for public sector entities. GovPlanet Direct is being offered to government entities under IronPlanet’s GovPlanet brand, which is dedicated to government surplus disposition. IronPlanet also announced that it has been named an NJPA Awarded Contract Vendor by the National Joint Powers Alliance. IronPlanet recognized that government surplus disposal extends beyond heavy equipment. For that reason, GovPlanet Direct is designed for all items that do not necessarily require inspection or hands-on help. National, state and local public sector entities will be able to connect with IronPlanet’s global buyer base through a self-service, multi-faceted disposition format. These entities also can take advantage of weekly online GovPlanet auctions as well as a reserve price Daily Marketplace format. GovPlanet Direct is a new online service and marketplace for selling all government surplus items, such as office furniture, computer equipment and a range of other non-rolling stock, as well as traditional equipment. Together, GovPlanet and GovPlanet Direct will offer state, local municipal and public sector entities a comprehensive, flexible solution to secure the highest value possible for their surplus property. GovPlanet Direct is expected to be launched in the third quarter this year. “Based on the success and overwhelmingly positive response to our GovPlanet brand over the past year and a half, it is with great satisfaction that IronPlanet is expanding its offerings to the public sector with the introduction of GovPlanet Direct,” said Jeff Holmes, senior vice president, Government Solutions and Auction Management, IronPlanet. “With GovPlanet Direct, GovPlanet will become the full-service destination for

government surplus property, providing sellers with the ultimate solution to dispose of all of their surplus assets from rolling stock to any surplus that they want to sell by reaching a broad market of buyers.” GovPlanet Direct will be backed by IronPlanet’s targeted marketing programs and inside sales support, and is built upon IronPlanet’s integrated technology platform. GovPlanet Direct makes it easy for buyers and sellers to register, list and navigate available

are seeking. “GovPlanet is honored to receive the new contact from the NJPA,” Holmes continued. “This award is a testament to our dedication to providing government agencies of all sizes with the best overall solutions to maximize the returns on their used surplus property.” As a public agency, NJPA creates national cooperative contract purchasing solutions on behalf of its member agencies which include all government, education and non-profit agen-

Purple Wave Auction announced an improved user experience to its website. The new interface offers a guided search with robust technology delivering instant results, with item counts, so users can quickly and easily find what they are looking for, according to the company. Once they have logged in, users can easily keep track can all the items that they are bidding on, watching or selling. For more information, visit www.purplewave.com or email auction@purplewave.com. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

“Based on the success and overwhelmingly positive response to our GovPlanet brand over the past year and a half, it is with great satisfaction that IronPlanet is expanding its offerings to the public sector with the introduction of GovPlanet Direct.” Jeff Holmes Government Solutions and Auction Management, Ironplanet

items via desktop, tablet or mobile phone. For the benefit and flexibility of both buyers and sellers, GovPlanet Direct’s self-managed options will provide a full spectrum of disposal options. Finally, GovPlanet Direct, streamlines the connection between buyers and sellers to simplify communication for important aspects like coordinating item pick up or shipment. IronPlanet Named NJPA Contract Award Vendor In addition, IronPlanet announced that it has been awarded a National Joint Powers Alliance (NJPA) contract for procurement of “Surplus Auction Services with Related Solutions.” GovPlanet Direct is built for those entities that use the NJPA to select vendors that they know will deliver the service they need to dispose of surplus property efficiently and with the returns they

cies nationwide and in Canada. These contract purchasing solutions arranged by NJPA offer both time and money savings for their users by consolidating the efforts of numerous individually prepared solicitations to one national, cooperatively shared process. The four year contract between IronPlanet and NJPA operates as a master agreement under which government entities are able to procure GovPlanet’s disposition services on pre-established terms. Now an NJPA Awarded Contract Vendor, IronPlanet, won this key contract due in large part to its innovative marketplace technology, its GovPlanet branded solutions, detailed inspection reports, targeted marketing capabilities and established inside sales team. (This story also can be found on Construction Equipment Guide’s website at www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 117

Page 118 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ADVANCE TIRE ....................................................................................................78 AIM ATTACHMENTS ..............................................................................................35 ALEX LYON & SON INC CHICAGO IL / RACINE WI ........................................................................117 ALEX PARIS CONTRACTING CO INC....................................................................9 ALTORFER CAT ....................................................................................................12 AMERICAN STATE EQUIPMENT ............................................................................7 ARING EQUIPMENT CO INC ................................................................................17 ASC CONSTRUCTION EQUIP USA......................................................................11 ATI CORPORATION/LEVEL BEST ........................................................................32 B & D FABRICATORS ............................................................................................41 BAIR PRODUCTS INC ..........................................................................................37 BARGAINS ....................................................................................................105,106 BELL TRUCKS AMERICA INC ..............................................................................59 BLANCHARD MACHINERY INC............................................................................22 BOBCAT CO ..........................................................................................................60 BOMAG AMERICA'S INC ......................................................................................51 BROOKS TRACTOR ..............................................................................................39 BUTLER MACHINERY ..........................................................................................35 CASE CONSTRUCTION........................................................................................89 CEG SCALE MODELS ..........................................................................................42 CLASSIFIEDS ......................................................................................................104 CONEXPO..............................................................................................................25 CONSTRUCTION EQUIPMENT GUIDE BACKHOES & ATTACHMENTS PROMO....................................................70 FELLING EW SLEEPER & MIDCO TESTIMONIAL ....................................54 WANTED....................................................................................................107 AUCTION TRIPLE BUY ............................................................................110 CUSTOM MADE PRODUCTS ..............................................................................36 DEANCO AUCTION PHILADELPHIA MS ..................................................................................114 DRUMCUTTERS ....................................................................................................40 EAGER BEAVER TRAILERS ................................................................................24 ERB EQUIPMENT..................................................................................................15 FABICK CAT ............................................................................................................2 FINKBINER EQUIPMENT CO..................................................................................7 FLANGE LOCK ......................................................................................................40 FOLEY EQUIPMENT CO ......................................................................................23 FURY MOTORS ....................................................................................................29 GEHL ....................................................................................................................64 GOMACO CORP....................................................................................................52 HITACHI MFG ........................................................................................................56 HOWELL TRACTOR & EQUIPMENT CO............................................................120 HYDREMA U S INC ..............................................................................................43 HYUNDAI CONSTRUCTION EQUIPMENT ..........................................................98 ILLINOIS TRUCK & EQUIPMENT ..........................................................................3 IMPACT ROLLER TECHNOLOGY INC ................................................................46 IRAY AUCTION ....................................................................................................114 IRONPLANET ......................................................................................................109 JCB INC..................................................................................................................92 JEFF MARTIN AUCTIONEERS INC ....................................................................114

JFW EQUIPMENT INC ..........................................................................................46 JJ SCHECKEL........................................................................................................31 JOB RENTALS AND SALES LLC ..........................................................................22 JOHN DEERE ........................................................................................................74 JOHN DEERE SKID STEER..................................................................................66 KAWASAKI - KCM..................................................................................................77 KOBELCO CONST MACHINERY ..........................................................................65 KOMATSU AMERICA CORP ............................................................................86,95 KUBOTA ..............................................................................................................103 KUBOTA SVL ........................................................................................................71 LANO EQUIPMENT INC ........................................................................................21 LEEBOY ................................................................................................................48 LICA OF NEBRASKA ............................................................................................32 LIEBHERR CONSTRUCTION EQUIPMENT ........................................................79 LINK-BELT EXCAVATORS ....................................................................................63 MACALLISTER MACHINERY CO INC ..................................................................39 MCCANN INDUSTRIES INC....................................................................................6 NPK CONSTRUCTION EQUIPMENT INC ............................................................27 NUSS GROUP ........................................................................................................8 OKADA AMERICA ..................................................................................................12 PATTEN TRACTOR & EQUIPMENT CO ..............................................................19 PROFILE PUBLICATIONS ....................................................................................28 PURPLE WAVE INC ............................................................................................113 RANSOME EQUIPMENT SALES LLC/LRH ........................................................107 RAYCO ..................................................................................................................36 RITCHIE BROS. AUCTIONEERS KANSAS CITY MO / FT WORTH TX ........................................................111 WILLINGSTON ND ....................................................................................119 ELKVIEW WV ............................................................................................115 ROAD BUILDERS MACHINERY ........................................................................6,13 ROAD MACHINERY & SUPPLIES CO ..................................................................78 ROADTEC ..............................................................................................................47 ROLAND MACHINERY INC ....................................................................................5 ROSCO MFG CO ..................................................................................................50 SAKAI AMERICA INC ............................................................................................55 SHEEHAN MACK ..................................................................................................18 SOUTHEASTERN EQUIPMENT CO ....................................................................43 STAR EQUIPMENT LTD ..........................................................................................6 SULLIVAN PALATEK..............................................................................................35 SWANSTON EQUIPMENT ....................................................................................30 TAKEUCHI..............................................................................................................82 THE VICTOR L PHILLIPS CO ..............................................................................32 THUNDERCREEK..................................................................................................33 TRI-STATE BOBCAT ........................................................................................37,41 VOLVO COMPACTION ..........................................................................................55 VOLVO CONSTRUCTION EQUIPMENT ..............................................................85 WACKER NEUSON CORP ....................................................................................68 WEST SIDE TRACTOR SALES ............................................................................22 WIRTGEN AMERICA ............................................................................................53 YANMAR AMERICA ..............................................................................................67

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 2, 2016 • Page 119

Unreserved public equipment auction Fast, flexible leasing and financing available – up to 100%, $0 down

1 of 3 – 2012 Caterpillar 924H

2008 Caterpillar 420EST 4x4

2007 Kenworth C500B

2007 Peterbilt 335

2011 Peterbilt 365

Williston, North Dakota

August 18 (Thursday) 8 am

Equipment includes

On-site inspection hours

Financing & leasing available

Location

Wheel loaders, service trucks, winch tractors, loader backhoes, bed trucks, motor graders & much more

Mon–Fri, 8 am–5 pm

Up to 100% financing, with no money down.

5589 141st Ave NW, Williston

Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration

More items added daily Call about selling: 701.774.9640

See complete listings at rbauction.com Ritchie Bros. Auctioneers (America) Inc. Auction Clerk License #225, Auctioneer Gregory M. Highsmith # 701 OAC. Terms & conditions apply. See rbauction.com/financing.

Page 120 • July 2, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE