Midwest_09_2010 by Construction Equipment Guide

$3.00

Published Nationally

Midwest Edition

May 1 2010 Vol. XVII • No. 9

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910 • www.constructionequipmentguide.com

Inside

Nation’s First ARRA Funded Project Nears Completion

Plote, Patten Team Up to Cut Costs…12

Nortrax Hosts Open House in Eau Claire…27

Lt. Col. Darrell Bennis (L), U.S. Army, speaks with CNH worker Victor Medina, who has a son serving in the U.S. Air Force in Afghanistan.

A crew member looks across the construction site of the new Tuscumbia Bridge in central Missouri. The new bridge is being built next to the existing bridge (seen on the far right), which was built in the 1930s

By Kathie Sutin CEG CORRESPONDENT

I.R.A.Y Shows Off Equipment…62

Table of Contents ............4 Parts Section ................33 Crushing, Screening & Recycling Section ....37-47 Truck & Trailer Section .... ..................................49-52 Auction Section ......57-67 Business Calendar ........60 Advertisers Index ..........66

Despite wet weather and a fluctuating river, America’s first stimulus fund project is lumbering toward an on-time completion and should be open to traffic this summer. The new bridge under construction near the tiny town of Tuscumbia, Mo., population: 224, was heralded as the nation’s first project funded by the American Recovery and Reinvestment Act of 2009. Thanks to close monitoring of the events in Washington by Missouri Department of Transportation staff, earth-moving equipment sprung into action just minutes after President

Barack Obama signed the legislation launching the stimulus program last year. Today the bridge is nearing completion, and vehicles will be driving on it in just a couple of months although the entire project, including removal of the existing bridge, won’t come to a complete end until October. The old bridge that carries Routes 17 and 52 over the Osage River in Miller County centered in the middle of the state was built in the 1930s. “Believe it or not, that bridge was built back during FDR’s New Deal, Works Progress Administration (WPA) days (and now an Economic Recovery Act project is actually replacing that bridge,” Roger Schwartze, MoDOT see BRIDGE page 36

New Case Skid Steers on Way to Afghanistan Case Construction Equipment welcomed guests from the U.S. Army TACOM (Tank-automotive and Armaments Command) to the CNH plant in Wichita, Kan., to commemorate its recent military skid steer production startup. The Army’s first 25 M400W skid steers have come off the production line at CNH and are being prepared for shipping to troops in Afghanistan. Case Construction Equipment celesee TROOPS page 14

Kan. Officials Eye Familiar Path With Road Plan By John Milburn ASSOCIATED PRESS WRITER

TOPEKA, Kan. (AP) During the Great Depression, President Franklin D. Roosevelt initiated a number of public projects to get the United States working again. Now, with the nation struggling to emerge from recession and the state’s unemployment rate staying above 6 percent, Kansas officials

are eyeing a new transportation program to get the state on the road to recovery. The idea has worked before. “I don’t think there’s any doubt that if we were to pass a new transportation program, you would see a lot of people who are put back to work,” said House Minority Leader Paul Davis. “There would be an economic stimulus effect.” In 1989, Kansas implemented a 10-year highway program that invested in reconstruction and

major modification of thousands of miles of roads. A second plan was passed in 1999, expanding its scope to rail and aviation. “I think it helped mitigate previous recessions” in the 1990s and early 2000s, said Senate President Steve Morris. Transportation Secretary Deb Miller said those efforts enhanced safety and expanded infrastructure with lasting economic benefits. see KANSAS page 33

Page 2 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call 630-279-4400 Fax: 630-279-9243 www.pattencat.com Complete inventory available online

COMPACTION

PATTEN CONSTRUCTION PRODUCTS

SKID STEERS Cat 232B, 2004, UN1671, EROPS, Aux Hyd ....................$22,000 Cat 232B, 2007, UE1061, EROPS, Heat, Aux Hyd ..........$20,000 Cat 236B, 2005, W1009, EROPS, Heat, Aux Hyd ............$20,000 Cat 236B, 2005, UE1131, EROPS, Heat, 2-Speed............$16,000 Cat 236B, 2005, UN2041, EROPS, Heat, HYD Coup ........$17,000 Cat 242B, 2005, W0333, EROPS, Heat, Aux Hyd ............$22,000 Cat 246B, 2005, W1016, EROPS, Heat, A/C ....................$24,000 Cat 246B, 2006, W0843, Heat, No Door ..........................$17,500 Cat 246B, 2006, W0718, EROPS, Heat, QC ....................$23,000 Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ..........$36,000 Cat 252B, 2005, W0372, EROPS, Heat, Aux Hyd ............$20,000 Cat 252B, 2006, W1182, OROPS, Aux Hyd ....................$26,000 Cat 262B, 2005, W0523, OROPS, Aux Hyd ....................$23,000 Cat 277, 2003, UN2127, EROPS, Heat, No Door ............$19,000 New Holland C185, 2007, UN2251, EROPS, A/C, Aux Hyd .......... ........................................................................................$36,000

Cat CB-534DXW, 2003, N2824, DD, Water/Vibe SYS, OROPS .... ........................................................................................$50,000 Cat CS-433E, 2005, UN2129, OROPS..............................$58,000 Cat 815F, 2006, N4586, EROPS, A/C ............................$238,000

ID# N3912 $40,000

DOZERS Cat D3GXL, 2006, N5010, EROPS, A/C ..........................$58,000 Cat D3GXL, 2006, N4968, EROPS, A/C ..........................$46,000 Cat D4G LGP, 2006, N4970, EROPS, A/C ........................$67,000 Cat D5G LGP, 2006, N4976, EROPS, A/C ........................$74,000 Cat D5N LGP, N4923, EROPS, Heat, A/C ........................$77,000 Cat D6N LGP, 2007, N5497, EROPS, A/C ......................$145,000 Cat D6R LGP, 2006, UN1810, EROPS, A/C, SU Blade ..$235,000

ID# UE1013 $110,000

MOTORGRADERS

Cat D6R XL, 2006, UN1811, EROPS, A/C, SU Blade ....$229,000 Cat D6T LGP, 2007, N5523, EROPS, A/C, Ripper, S BL $200,000

WHEEL LOADERS/LOADER BACKHOES Cat 140HNA, 2006, N5281, EROPS, A/C, Ripper ..........$176,000 Cat IT38G, 2007, N5457, EROPS, A/C, GP BKT ............$145,000

TELEHANDLERS

Cat 420D, 2005, N4235, EROPS, A/C, GP BKT................$63,000

Cat TH220B, 2005, N3912, OROPS, Hyd Coupler ..........$39,000 Cat TH360B, 2005, N4306, EROPS, Heat, A/C ................$37,000

Cat 420D, 2006, N4770, EROPS, A/C, E-Stick ................$59,000 Cat 420D, 2006, N4768, EROPS, A/C, E-Stick ................$50,000

EXCAVATORS Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ........$39,000 Cat 314 CLCR, 2007, N5460, EROPS, A/C, Aux Hyd ......$70,000 Cat 315CL, 2006, N4943, EROPS, A/C, 10’2” Stick ........$82,000 Cat 330CL, 2002, UE1017, EROPS, A/C, Aux Hyd ..........$75,000 Cat 345BL, 1999, UN2268, EROPS, A/C, Quick Coupler..$75,000 Cat 345BIIL, 2002, UE1015, EROPS, A/C ........................$85,000

Cat 420D IT, 2005, N4236, EROPS, A/C, E-Stick ............$58,000

ID# UN1941 $105,000

Cat 420E IT, 2006, N4926, EROPS, A/C, E-Stick..............$56,000 Cat 430D IT, 2005, N4001, EROPS, A/C, E-Stick ............$59,000 Cat 430D, 2004, N3592, EROPS, A/C, E-Stick ................$68,000 Cat 430D, 2005, N4513, EROPS, A/C, E-Stick ................$50,000 Cat 430D IT, 2005, N3997, EROPS, A/C, E-Stick ............$57,000

TRACK LOADERS Cat 953C, 2006, N4827, EROPS, A/C, Drawbar, GP Bucket.......... ......................................................................................$122,000 Cat 953C, 2006, N4909, EROPS, A/C, Drawbar, GP Bucket.......... ......................................................................................$118,000 Cat 953C, 2006, N5135, EROPS, A/C, Drawbar, GP Bucket.......... ......................................................................................$118,000 Cat 963C, 2005, N4354, EROPS, A/C, Drawbar, GP Bucket.......... ......................................................................................$126,000 Cat 963C, 2006, N4903, EROPS, A/C, Drawbar, GP Bucket.......... ......................................................................................$145,000 Cat 963C, 2007, N5395, EROPS, A/C, Drawbar, GP Bucket.......... ......................................................................................$128,000 Cat 963C, 2007, N5305, EROPS, 3 CYD GP BKT ..........$140,000

Cat 420E IT, 2006, N5116, EROPS, A/C, E-Stick..............$65,000

Cat 430E IT, 2006, N5208, EROPS, A/C, E-Stick..............$59,000 Cat 928G, 2004, UE1098, EROPS, A/C, Ride Ctrl ............$72,500

ID# N5281 $180,000

Cat 928GZ, 2007, N5567, EROPS, Heat, A/C ................$117,000 Cat 938G, 2005, UE1013, EROPS, A/C, Ride Ctrl ..........$110,000 Cat 938GII, 2004, UN1941, EROPS, Heat, A/C ..............$105,000 Cat 950H, 2006, UE1016, EROPS, A/C, Ride Ctrl ..........$156,000 Cat 980G, 1998, UN2015, EROPS, 7 CU YD Bkt............$125,000

Ryan Kuse ID# UN1957 $25,000

630-758-1224 kuseryan@pattenindustries.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 3

2006 Dressta TD25M, cab with A/C, Cummins QSX15 360HP diesel, 30” pads, 13’ semi-u blade, powershift, 80,000 lbs., 1,529 hours, $194,500

2003 Hyundai 740, cab with A/C, Cummins 130HP diesel, 24,490 lbs., 2.5 yard bucket, 3rd valve, 20.5x25 tires, 4,112 hours, $39,500

2006 Ingersoll-Rand SD100D 84” vibratory smooth compactor, canopy, Cummins 3.9L 120HP diesel, 23.1x26 tires, 22,500 lbs., 884 hours, $54,500

2000 Terex TA35, 35 ton capacity, maintanence records available! $59,500

2004 Cat CP563-E 84” vibratory padfoot compactor with hydraulic pushblade, canopy, Cat 3056-E 142HP diesel, 23.1-26 tires, 24,710 lbs., 99 actual hours, $74,500

UNUSED 2009 Skytrak 10042, Cab, 10,000# Capacity, 54’ Reach, 62” Carriage, 60” Forks, Stabilizers, Auxiliary Hydraulics, 2 Hrs, $82,500

2007 Doosan Solar 225LC V, 50’ long reach, 148HP, 52,023#, 32” pads, 27’ 9” boom, 20’ 3” stick, 36” bucket, 384 hours, $92,500

2007 JCB JS330 LC, A/C, 270HP, 74,600 lbs., 32” pads, 54” digging bucket, 785 hours, $89,500

UNUSED 2007 Gehl 603, cab with A/C, 69HP, rubber tracks, 20” bucket, auxiliary hydraulics, hydraulic pushblade, $37,500

2006 JCB 426HT, cab with A/C, Cummins B5.9C 150HP diesel, 2.6 yard q-tach bucket, hyd. coupler, 3rd valve, 72x60” forks available, 20.5R25 Michelin radials, joystick control, heated mirrors, strobe light, 33,500 lbs., 2,055 hours, $69,500

UNUSED New Holland W130TC, cab with A/C, 667TAM2 148HP 6.7L diesel, 20.5-25 tires, single joystick control, JRB hydraulic coupler, 3rd valve, load travel stabilizer, reversible fan, grid heater, forks available, 27,750 lbs., 11 hours, full factory warranty! $109,500

2007 New Holland B95, Cab w/AC, 15,300 Lbs, 4x4, Extend-a-Hoe, 21x24 Tires, Pilot Controls, 613 Hrs, $44,500

UNUSED New Holland W80TC, cab with A/C, Deutz BF4M 75HP diesel, 405/70R20 tires, hydrostat 2 speed transmission, 1.5 yard bucket, single joystick control, hydraulic coupler, 3rd valve, grid heater, forks available, 12,757 lbs., 11 hours, warranty good until 2-11, $67,500

NEW 2009 Mack GU813, MP7-395C, 10.8L, engine brake, Allison 6 speed AT, double frame, rubber block over beam suspension, 18,000# fronts, 40,000# rears, 264” wheel base, Swaploader SL545 54,000# rolloff, hydraulic lift, hook system, 7,359 miles, $109,500 FET paid

815-941-1900 Fax: 815-941-1486 Email: sales@iltruck.com The Premier Midwest Equipment Dealer

View Entire List of Equipment at:

www.iltruck.com

Rockford

I-80 Joliet Davenport IA

Lake Geneva, WI

Chicago

Rt. 47

“The Premier Midwest Equipment Dealer”

2005 Freightliner M2, A/C, 29,000# GVWR, 190HP Cat C7 diesel, 6 speed, 2,000 gallon Valew tank, 5,608 miles, $34,500

I-39

2007 Laymor 8HC, 37HP Kubota, 8’ Broom, Towable, 70 Gallon Sprinkler System, 102 Hrs, $14,500

I-55 Exit 112

Morris

Gary IN

Rt. 6 N

1/2 Mile W

Dwight S

Page 4 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

Founder, Publisher & CEO Vice President Emeritus Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

FEATURES…

PLOTE CONSTRUCTION TEAMS WITH PATTEN CAT TO CUT COSTS

Replacing entire fleets of viable, working machines with new models is not an option for most customers — especially in tough economic times.

BLOATED LAKE THREATENING NORTH DAKOTA TOWN AGAIN

Almost a year after worried authorities went door to door warning residents to flee as water carved through a nearby dam, a tiny North Dakota town is facing the possibility of having to evacuate again because of flooding.

CARLETON EQUIPMENT NAMED NEW DOOSAN DEALER IN MICH.

NORTRAX HOSTS OPEN HOUSE AT EAU CLAIRE SITE WITH TEST DRIVES AN EVENT HIGHLIGHT

Founded in 1938, Carleton Equipment Company is Michigan’s largest premier Bobcat dealership.

Web site Editorial e-mail Advertising e-mail For advertising rates Contact

Nortrax held an open house April 16 and 17 at its Eau Claire, Wis., location offering visitors a chance to test drive equipment, speak with equipment experts, attend workshops and enjoy some good food.

46 27

GENERAL EQUIPMENT & SUPPLIES HOSTS AGGREGATE SEMINAR 2010

The company played host to more than 260 customers who attended educational and application training sessions on a variety of topics.

INDUSTRY RECALLS THOMAS SKODACK’S INTEGRITY, PROFESSIONALISM

Thomas (Tom) Skodack, a regional sales manager of Sennebogen LLC, surrounded by family, lost his courageous battle with cancer on April 13, 2010.

Edwin M. McKeon Sr. Hal Ewing Joseph S. McKeon Craig Mongeau Claudia Stahley Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon • Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

Contact

Toll Free Fax

• North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

Ed Bryden • Central and Eastern Indiana • Michigan • Ohio • Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota • South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

I.R.A.Y. SHOWS OFF LOTS OF EQUIPMENT IN FOLEY, MINN.

The rain and mud didn’t stop the crowds from attending I.R.A.Y.’s March 5 auction in Foley, Minn. Online bidding for the heavy equipment also was available.

54 CLASSIFIEDS 58 COMING AUCTIONS 60 BUSINESS CALENDAR

EQUIPMENT… 46 INDECO Multi 1000 Pulverizer

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2009, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 5

(6) Komatsu WA250’s, ‘07-’09, LOW Hrs....P.O.R.

Wirtgen W600DC, ‘01, 2198 hrs ..........P.O.R. EXCAVATORS

COMPACTION, MILLING & PAVING

Fabrek FT-133 Harvester, ‘00............$90,000

Komatsu PC78MR-6, ‘04, 3327 hrs ..$39,500

(2) Hamm HD120HV Rollers, ‘03+’06....CALL

Timbco 415D, ‘01 ............................$135,000

Komatsu PC150LC-6, ‘98, 9246 hrs ..$39,500

(3) Hamm HDO120HV Rollers, ‘06 ........CALL

Timbco 415EX/Rolly II, ’05, 4238 hrs $220,000

Komatsu PC200LC-7, ‘05, 3921 hrs ..$82,500

Hyster Roller C747B, ‘01, 3497 hrs ..$14,500

Timbco 416D/Slingshot, ‘00..................$48,000

Komatsu PC200LC-7, ‘05, 3186 hrs ..$82,500

Hyster Roller C747B, ‘06 ..................$14,500

Timberjack 608/Waratah, ‘98 ..............$49,000

LeeBoy 8500, ‘96 ..............................$22,500

Valmet 546F, 3239 hrs ......................$40,000

LeeBoy 8500, ‘97 ..............................$14,500 LeeBoy 8500LD, ‘04, 2739 hrs ..........$26,500

Valmet 840.2/8, ’05, 7208 hrs ........$178,000 WHEEL LOADERS

IR DD24 Roller, ‘04, 2151 hrs ..........$15,000

Dresser 530, ‘78, UKN hrs ................$12,500

IR SD105DX Roller, ‘03, 1487 hrs ....$54,500

Komatsu WA150-5, ‘05, 7551 Hrs ........P.O.R.

Rosco TRUPAC915, ‘05, 481 hrs ......$35,000

(3) Komatsu WA250-5L, ‘08’s ..............P.O.R.

Komatsu CD60R-1A, ‘99, 2597 hrs ..$59,500

Wirtgen W600DC, ‘01, 2198 hrs ..........P.O.R.

Komatsu WA250-5L, ‘05, 2834 Hrs ..$78,500

Volvo A35C, ‘01, 5116 hrs ................$96,500

Wirtgen W2000, ‘03, 6804 hrs ............P.O.R. DOZERS

(2) Komatsu WA250-6, ‘09, 515 Hrs ..............

Deere 550GLGP, ‘96, 4861 hrs ..........$29,500

Deere 544H, ‘00, 5821 Hrs................$56,500

Gehl 7810, ‘04, 1517 hrs ..................$21,500

Deere 550GLGP, ‘98, 9415 hrs ..........$21,500

Deere 544G, ‘97, 7921 Hrs................$38,500

Takeuchi TL150, ’05, 2336 hrs ..........$21,500

Deere 650G/LGP, ’97 ................................Call

Komatsu PC228UCLC-3, ‘01, 4587 hrs .......... ..........................................................$75,500 Komatsu PC400LC-6, ‘03, 3648 hrs $155,000 Komatsu PC400LC-7, ‘06, 2554 hrs $199,500 Cat 311B, ‘96, 4080 hrs ....................$27,500 Hitachi EX400LC-3, ‘96, 14,173 hrs ..$36,500 ARTICULATED TRUCKS

Moxy MT30, ‘95, 8828 hrs ................$37,500 SKID STEER LOADERS

........................................................$102,500

Dresser TD15C, ‘93, 4145 hrs ..........$19,800 Komatsu D21E-6, ‘92, 1731 hrs ........$14,500 Komatsu D31E-20, ’99, 2741 hrs ......$29,500 Komatsu D31PX-21, ‘06, 561 hrs......$46,500 (2) Komatsu D475A-5’s, ‘04, REBUILT ....Call FORESTRY Deere 490E/Fabtek Head, ‘96 ..........$30,000 Wirtgen W1900, ‘05, 2500 Hrs ............P.O.R. Deere 1010D, Forwarder ................$170,000

Sennebogen 835M, ‘07, 4316 Hrs ........P.O.R.

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

V I S I T R O L A N D M A C H I N E R Y . C O M

Page 6 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke

(630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com

2076 Mustang, 80hp, Open Canopy, Hand/Foot Controls, I/D: 004883, 525 Hours, $21,995

MTL25 Mustang, 100hp, Cab 2086 Mustang, 80hp Cummins, w/Heat-A/C, Joystick Controls, cab w/ heat, hand/foot controls, I/D: 501849, 1660 Hours, $30,500 I/D: 0030032312, 375 hours, $25,295

8 Chicago Area Locations

View our complete Used & “Like New” inventory at McCannOnline.com MTL20 Mustang, 81hp, Isuzu TB135 Takeuchi, 7,600# excavaTurbo, Open Canopy, Joystick tor, open canopy, aux. hyd., I/D: Control, I/D: 401251, 1600 Hours, 516091, 975 hours, $25,995 $25,995

RS8 Gehl, 8,000# lift, 44’ boom, cab w/ heat, aux. hyd., I/D: 215323, 3761 hours, $53,995

RS5 Gehl, 5,000# Lift, 34’ Boom, Open Canopy, I/D: 212403, 1015 Hours, $45,995

2006 Case 420, s/n N6M412301, 73 Hrs, Deluxe Cab w/Heat, Manual Coupler.................$21,000

# THE

2006 Case 1850K, s/n HHA431139, 704 Hrs, Cab w/Heat & A/C, 13’6” 6-Way Blade, 30” Pads, Cold Start (48MO / 4000 Full Machine Warranty until 08-10-2009) .. ...........................$162,500

Allen Engineering SP400, 46” Riding Trowel, Hydraulic Steer, Mechanical Drive, Counter Rotating, I/D: 9000031158, 640 Hrs, $6,495

STAR EQUIPMENT LT D .

CONSTRUCTION EQUIPMENT GUYS SINCE 1968

Call Sales 515-283-2215 • 800-352-5401 1401 2nd Ave • Des Moines, IA 50314 www.starequip.com

Des Moines • Ames • Cedar Rapids • Waterloo

2007 Komatsu CD60R-1

2007 Case 1850K, s/n N7HC51103, 744 Hrs, Cab w/Heat & A/C, 13’6” 6-Way Blade, 30” Pads, Cold Start (48MO / 4000 Full Machine Warranty until 07-15-2011).. ...........................$170,000

2005 Vibromax VM116PDB, s/n JKC8340900, 945 Hrs, 82” Padfoot Roller w/Blade ....... .............................$43,000

Approximately 900 Hrs, Like New, $119,500 2004 Vibromax VM116D, s/n JKC8341104, 1690 Hrs, 82’ Smooth Drum Roller, ROPS ...................$35,000

PLEASE CALL DOUG MEHNER OR DAVID MEHRTENS (913) 371-3822

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 7

1996 CAT D9R......................................$194,000

1992 CAT 950F I ....................................$57,500

1996 CAT 988FII ..................................$360,000

2004 CAT 988G ....................................$335,000

S/N 7TL00577, 13,663 hrs., 9SU Blade, EROPS/AC, SS Ripper

S/N 4DJ00955, 8,734 Hrs, Cntrwght, 4cy, Bucket, 23.5R25 Tires

S/N 2ZR00430 Complete Dlr. Rebuild, EROPS, HL, Spade w teeth, 21,715 hrs.

S/N BNH01218, 9,048 hrs., EROPS, HL, Spade w/ teeth, $335,000

1977 CAT D6D........................................$31,500

CAT D4H LGP ........................................$27,500

2005 CAT D6R LGP ............................$159,000

1985 CAT 963 ........................................$29,000

S/N 04X01976, 6,041 hrs., OROPS, 6S Blade, 20” tracks, Drawbar

S/N 9DB04335, 13,349 Hrs, OROPS, Rebuilt Engine, 90% U/C

S/N ADE00736, 4,879 hrs., EROPS, 6SLGP Blade, Drawbar

S/N 21Z00299, 8894 Hrs, EROPS, GP Bkt, Good U/C

2005 CAT 924G ......................................$85,000

2005 CAT 247B ......................................$24,500

1996 CAT 140G ......................................$84,000

2007 CAT D6K LGP ............................$119,500

S/N DDA02399, 2096 Hrs, EROPS, Q. Coupler, 2.2 Yd. GP Bkt

S/N MTL01299, 2,274 Hrs, EROPS, Aux. Hyd., Good U/C

S/N 72V17355, 8475 Hrs, EROPS, AWD, Snow Wing, DIF. Lock

S/N DHA00263, 2116 Hrs, EROPS, GPS Ready

1999 CAT M318 ....................................$55,000

2004 CAT 420D IT..................................$58,000

2007 CAT 303CCR..................................$33,500

1997 CAT 325BL ....................................$54,000

S/N 8AL01887, 8712 Hrs, EROPS, VA Boom, 48” Bkt, Outriggers

S/N BLN08113, 2965 Hrs, EROPS/AC, 4x4, E Stick, 36” Bkt

S/N BXT01870, 863 Hrs, Cab, Aux. Hyd, Rubber Track

S/N 2JR01139, 8,700 Hrs, 48" GP Bucket

Please Contact Bob Williams or Jeff Speer

800/353-1944

414/461-9100

Outside WI & Upper Michigan

Within WI & Upper Michigan

11200 W Silver Spring Rd. Milwaukee, WI 53225

www.FABCO.com Hundreds of machines. Listings updated daily.

Page 8 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW M SERIES IN STOCK! Authorized Bobcat® Dealer New M Series E32 Excavators

Bobcat Tractors In Stock Now 435 Fasttrack, 2005, 1800 Hrs, Cab Heat Air, Call for Details

• 0% for 60 Mo. or • 1.9% for 72 Mo. or • up to $3,000 in Rebates or • Free Front End Loader

NEW E60, E35 & E32 Excavators In stock now! Call for pricing and details

JCB 215S Call for Pricing and Details

For Sale or Rent – Call for Pricing and Rates

Bobcat Forestry Cutter on T320, for Rent

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines

Bobcat T190’s............Starting at $15,000 Bobcat T200..............Starting at $15,000 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands

Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 www.farmriteequip.com U.S. Hwy 12 W Dassel, MN 55325

320/275-2737 • Toll Free 888/679-4857

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS

OFF ROAD HAULERS

Komatsu WA180-1, 1996, EROPS, Quick Coupler, Exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . .$46,500 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . .$100,000 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,000 New Holland LS170 Skid Steer, 2004, 300 hrs . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,000 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$66,000

Komatsu CD60R-1 Crawler Dump Truck, 1997, 360° rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$66,000 Terex TA40, 2000, 6WD, 6x6, 40 ton Detroit 60 Series, Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$142,500 Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work ready . . . . . . . . . . . . . . . . . . . .$127,500 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, working everyday . . . . . . . . . . . . . . . . . . . . . . .$145,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt .$115,000 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, approx 7,000 hrs, good condition . . . . . . . . . . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C, P/S trans, working everyday on jobsites . . . . . .$87,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites $89,000 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500

COMPACTORS IR DD22, 1993, 39" double steel, vibratory, Deutz dsl, water spray, v. good . . . . . . . . . . . . . . . . . . . .$18,500 IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000 Cat 825B, 1975, cab, S-blade, 50% front, 20% rear tires, good runner, can go to work . . . . . . . . .$52,500 Cat 825C, 1988, EROPS, S-blade w/tilt, rear 80%, front 60%, good condition . . . . . . . . . . . . . . . . .CALL Galion S4-6B, Deutz dsl, hydrostatic, 42” drums, transport wheels, water spray . . . . . . . . . . . . .$4,800 Hypac C747B, 2001, articulated, vibratory, 47” drums, water spray, Deutz 2 cyl, 5500#, good condition . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 Hypac C850B, 1999, ROPS w/cab, 84” smooth drum, drive, Cummins, 18-26 tires . . . . . . . . . . . . . .$47,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500 (2) Champion Superpac A421 . . . . . . . . . .$11,500

CRAWLER TRACTORS Cat D4H Series II, 1990, OROPS, 6 way blades, 18" pads, draw bar, 100% Cat U/C . . . . . . . . . . .$57,000 Cat D6H, 1988, OROPS, S-blade w/tilt . . . .$76,000 Cat D6H LGP Series II, 1993, EROPS, diff steer, drawbar, 30" pads, fresh undercarriage . . . .$89,000 Cat D6H, 1987, Semi U blade w/tilt, ROPS, fair U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,000 (2) JD 450G, 1996, wide tracks, ROPS, PAT blade . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea Komatsu D37P-5, 1997, 24" Pads, OROPS, P/S . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36,500 LANDSCAPING

Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . .$13,000 Case/IH 485 Utility Tractor,1986, Case 3 cyl dsl engine, 55 gal water tank . . . . . . . . . . . . . . . . . . . . . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . . . . . . . . . . . . . . . . . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd CRAWLER LOADERS Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt . . . . .. angle tongue, scrapers, 2” axles . . . . . . . . . . . . .$9,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 AIR COMPRESSORS Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000 IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . . . .CALL

SPECIALS TRUCKS & TRAILERS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng .$17,500 (2) 48' Box Vans w/Liftgates, Good Condition . . . . .. (12) IR L6-4MH Light Plants, 1992-1995, all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL IAmerican Augers 16" Boring Machine, 10 HP gas, CRUSHING & CONVEYING 35,000# thrust, 30' track . . . . . . . . . . . . . . . . . . . .$7,500 Power Screen, Mark II, 1987, Port. Screening Plant, BACKHOES Double Deck, 24'x40' . . . . . . . . . . . . . . . . . . .$36,000 Cat 416C IT, 2000, 4x4, OROPS, Quick Coupler, GP Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. Bkt, Extendahoe . . . . . . . . . . . . . . . . . . . . . . . . .$36,000 Case 580L Rubber Tire Loader Backhoe, 1997, side & rear conveyors, T/A carrier . . . . . . . . . . .CALL OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . . .$24,500 DRILLS Volvo BL70, 2003, 4x4, Extend-A-Hoe, EROPS, 24" Bkt, Like New . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59,500 John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . . . . . . . . . . . . . . .$150,000 MOTOR SCRAPERS Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good John Henry Drill Mtd on Cat 320L, 1994, 24' drill, condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL carousel, dust collector . . . . . . . . . . . . . . . .$162,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL CRANES

HYDRAULIC EXCAVATORS JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . .$39,000 Hitachi UH181, 1985, Equipped w/hammer . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber, operational . . . . . . . . . . . . . .$10,500/OFFER Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, 10 roller U/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31,500 Cat 313B-CR, 2001, zero tailswing, A/C & AM/FM, JRB quick coupler . . . . . . . . . . . . . . . . . . . . .$93,000 Kobelco SK200LC Extra Long Reach, 1993, 32" TBG pads, 42' reach, nice . . . . . . . . . . . . . . .$68,500 Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, long stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44" Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6" TBG pads, work ready . . . . . . . . . . . . .$57,000 (5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . .CALL Komatsu PC750 LC-6, 1999, 454 hp, 27” boom, 11’10” stick, 44’ DGB, aux plumbing, bucket choice, 24k ctwt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$255,000 Komatsu PC400 LC-6LK, 1999, 10’6” stick, JRB coupler, 31.5” TBG, ctwt removal, choice of bkt .$77,500 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” TBG, ctwt removal, choice of bkts, working everyday . .$97,500 Komatsu PC160 LC-7KA, 2004, 24” TBG pads, JRB coupler, plumbed, 8’6” width, nice, work ready CALL Volvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, hammer/shear plumbing very good condition . . . . . . . . . . . . . . . .$205,000

Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, dsl, 4 section boom 8' jib . . . . . . . . . . . . . . . . . . . . . . . .$14,500 Shuttlelift Model 3330 ELB Hyd. Carry Deck Crane, duel fuel, elec. winch w/remote control, exc. Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32,500

MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . .$4,000 ea.

ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . . . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond. . . . . . . . . . . . . . . . . . . .$3,500 Ea Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 â€¢ May 1, 2010 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

Gary Carlson Equipment: Your trusted local source for slide rails and trench boxes now stocks a complete line

352 7(& 6KLHOGLQJ 6KRULQJ DQG 6OLGH 5DLO 6\VWHPV

'85$ %$6( $1' $/7851$ *URXQG 3URWHFWLRQ 0DWV

*HQHUDWRUV DQG /LJKW 7RZHUV

of construction equipment and supplies.

&RPSDFWLRQ Equipment

$LU &RPSUHVVRUV DQG 3QHXPDWLF 7RROV

:HOOSRLQW 6XEPHUVLEOH DQG +\GUDÃ¿RZ 3XPSV

And you thought we just did trench boxes

0LQL ([FDYDWRUV DQG 6NLG 6WHHUV

Gary Carlson Equipment Co. 5HQWDOV s 6DOHV s 6HUYLFH s 'HOLYHU\ 0DQNDWR 6W s %ODLQH 01 s

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 11

View us at: www.amstate.com

PAVERS / ROAD WIDENERS LEEBOY 8515T - ‘04 • 8-15ft screed, osc, push rollers, new pads, recent screed rebuild, 1415 hrs ..............................................................................................$54,500 BLAW KNOX RW195C - ‘86 • Widner to 14’, w/Crane, Dual Discharge, 2990 Hrs ........ ..........................................................................................................................$45,000 CEDAR RAPIDS CR362L - ‘08 • Electrically Heated Stretch 16 Screed, Top Con V, 740 Hrs ..................................................................................................................$249,950 GOMACO PAVING TRAIN - ‘05 • GP2800-4T and PS2600 to 25’, HEM TC ‘08 to 28’ all Low Hours ..................................................................................................$1,000,000 MAULDIN 690FT - ‘08 • 8' to 13' gravity fed track paver (LOW HOURS), 29 hrs.......... ..........................................................................................................................$42,500 MIDLAND SP-6 - ‘09 • Legal load, Rt hand discharge to 6', 190 hrs ..............$95,000 CALL items may be on rent causing pricing and hours to vary.

ROLLERS INGERSOLL RAND DD90HF - ‘06 • 66" high freq, dbl drum vib, w/lites, 1300 hours .. ..........................................................................................................................$65,000 INGERSOLL RAND DD112HF - ‘06 • 78” high freq, dbl drum vib w/1500 hrs $55,000 INGERSOLL RAND SD105DX - ‘04 • 84" smooth drum soil with 1020 hrs ......$53,500 SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 200 hrs ..............................$13,500 SAKAI SW300-1 - ‘09 • 39.2" Dbl Drum vib w/ 36 hrs ....................................$29,950 SAKAI SW320 - ‘09 • 47" Dbl Drum vib w/ Foldable ROPS, EPTW, 100 hrs ....$27,429 SAKAI SW330 - ‘07 • 51", 6700lb, 4000VPM, dbl drum vib with 320 hrs, warranty...... ..........................................................................................................................$29,950 SAKAI SW652 - ‘09 • 58" Dbl Drum vib w/ 172 hrs..........................................$68,500 SAKAI GW750 - ‘09 • 77" Pneumatic vibratory roller w/ heat shields, 385 hrs.............. ........................................................................................................................$102,500 SAKAI SW800II - ‘09 • 67" Dbl Drum w/exact meter, 197 hrs ..........................$93,500 SAKAI SW880 - ‘09 • 79" Dbl Drum vib w/ 141 hrs........................................$116,175

GROVE TM890

MANITOWOC 777

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • KAWASAKI WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT

CRANES

SIMPLICITY portable dual screen plant, 6x16 and

GROVE RT760 60 TON CAPACITY ROUGH TER-

6x20 triple deck horizontal screens, 60"

RAIN CRANE, 1993, with Cat Diesel, 110’

underscreen conveyors, 42" cross conveyors, tri-axle chassis with hydraulic leveling ..$199,800 CEDARAPIDS 4136 Portable twin roll plant, with Allis 5'x16' single deck horizontal screen,

CURB MACHINE GOMACO GT3600 - ‘04 • curb machine w/ 30" trimmer, high pressure water, 2 vibrators, 1 mold, all sensors and mounting hardware, 2130 hrs ............................$75,000

RUBBER TIRED EXCAVATORS GRADALL XL 4100 - ‘02 • w/72” ditching bucket, 4000 hrs, good shape ........$49,500 GRADALL XL 4100II - ‘05 • A/C up, 72” Ditch Bucket, “Through Shop”, 8500 Hrs ...... ........................................................................................................................$115,000

PSI MD413XT - ‘08 • 10' moldboard, front bucket, rear scarifier, enclosed cab, 133 hp, 14,000 lbs, 120 hours ................................................................................$84,950

COLD MILLING MACHINE TEREX PR165 - ‘09 • 24” cutting width, 4 large rubber tires, large front loading conveyor, 385 hrs ................................................................................................$150,000 TEREX PR330T - ‘08 • 4 track, front loading, milling machine with “combo cutter” 2',3',4' widths, 850 hours ..............................................................................$265,000

Contact Marty in Illinois 1-800-307-0221 mahrendt@amstate.com Photos & Detail Descriptions view: www.amstate.com

Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ............................ ......................................Reduced to $209,900 GROVE TM890 90 TON HYDRAULIC TRUCK

Cummins V-12 diesel, on tandem axle chassis

CRANE, 1991, with a 114’ full power boom, 33’

with hydraulic leveling..........................$68,000

to 58’ Telescopic Offsettable Swingaway, Grove

ALLIS H400-SD portable cone plant, Cummins

Model HO30B-26 Main and Auxiliary Hoists,

diesel, rear feed conveyor, side discharge con-

Cummins 6BT5.9 superstructure engine, on a

veyor, tandem axle chassis with run-on

Grove 8x4 carrier with a Cummins NTC400 Big

hydraulic jacks ..................................$172,800

WHEEL LOADERS

MOTOR GRADER

Power-Pinned Boom, 32’ to 56’ Telescopic

KAWASAKI 95Z-V, wheel loader (2006), 340 hp Cummins QS15 diesel, 4/3 speed Powershift

Cam III diesel, 13 speed Roadranger, and a Nelson tandem-axle boom dolly ........$235,000 MANITOWOC 777 200 TON CRAWLER CRANE, 2000 model, 220' main boom, 40' fixed jib, hoists with free-fall option, 48" track shoes,

transmission, 29.5x25 Bridgestone L3 radials, 7

Series II counterweight, self-assembly package,

cu. yd. GP bucket, enclosed ROPS with a/c ......

Cummins diesel, third drum, 7000 hours, job

..........................................................$249,500

ready ..................................................$950,000

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 12 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Plote Construction has been doing business with Patten Industries for more then 40 years. (L-R) are Ray and Dan Plote and Garrett and Crane Patten.

Dan Plote (L), president of Plote Construction, gets the keys to the repowered Cat 980G from Patten Industries Dealer Principal Garrett Patten.

Plote Construction Teams With Patten CAT to Cut Costs A big part of Bill Bayne’s job is keeping track of environmental laws and how they impact Patten CAT’s customers. Bayne, Patten’s environmental health and safety manager, ensures customers know when new regulations are coming and what steps they can take to meet them. “We’ve been talking emissions for about two years now, to help our customers comply with the upcoming regulations from Cook County, the Illinois Tollway, the state of Illinois” and other entities, Bayne said. “A lot of people weren’t aware of the options they had.” Diesel engines often have long service lives and can be rebuilt. Many engines are still in use that were certified to less stringent emission standards in effect at the time of their manufacture and lack the advanced emission controls in existence today. Engines manufactured as recently as 1996 do not have the most advanced technologies to reduce emissions as new machines. Patten and Caterpillar offer repower and retrofit technologies designed to reduce the emissions of existing diesel vehicles. A few of these after-market equipment options also are designed to reduce fuel consumption and to improve operational efficiencies. Replacing entire fleets of viable, working machines with new models is not an option for most customers — especially in tough economic times. Retrofitting with cleaner emissions technologies is a cost-effective and sustainable solution. And, fortunately, state and federal agencies have been offering grants to help fund those solutions. Finding those grants and helping customers apply for them is another big part of Bayne’s job. “Many contractors and business owners weren’t aware that stimulus money was available for upgrading their heavy equip-

ment,” Bayne said. “We’re here to help them find that money and apply for it.” Plote Construction is one such customer. Plote is a family owned business with more than 45 years experience in heavy highway contracting. Projects include roads, highways, airports, lifestyle centers and housing developments, Dan Plote, president of Plote Construction, said. And Plote has been a partner with Patten CAT since Dan Plote’s dad, Ray, started the company in 1965. “We’ve been doing business with them for that long for a reason,” Dan Plote said. “They help us get our work done, whether it’s through parts and support services, or new equipment or help like they gave us on the repower project.” Because Plote and Patten work closely, it made sense for Plote to ask for suggestions

on what to do with the three aging 980G wheel loaders. The machines were nearing 20,000 hours of operation each and were put in the field long before current emission standards. “We’re always buying new equipment, but we saw the economic slowdown coming and wanted to be extra careful,” Plote said. “So we went to Patten and asked, ‘What are our options?’” Patten was aware that federal money from the American Recovery and Reinvestment Act was earmarked for state programs to help upgrade older, less efficient diesel engines. Those programs — similar to “cash for clunkers” for big machines — could be tapped to help solve Plote’s dilemma, Baynes suggested. The Illinois EPA, in cooperation with its partners in the Illinois Clean Diesel

Ray Plote (far R), owner of Plote Construction, stands with the primary team responsible for the disassembly, assembly and modification on the Cat 980Gs. (L-R) are Patten Industries technicians Brian Sansome; Ken Cutler; Wayne Miller; Luke Mueller, service manager of Patten Industries; Patten technician Todd Lentz.

Workgroup, administers various grant programs through the “Illinois Clean Diesel Grant Program” and the existing “Illinois Clean School Bus Program.” The Illinois EPA received $4.2 million in stimulus funding for clean diesel programs. Projects that are part of the grant program include the installation of diesel oxidation catalysts, closed crankcase ventilation systems, particulate filters, the purchase of diesel hybrid vehicles, engine repowers, and equipment to reduce or eliminate idling, such as direct-fired heaters and auxiliary power units, said Darwin Burkhart, manager of Clean Air Programs of the Illinois EPA. “Our goal is to help school districts, local governments, businesses, and truck owners and operators find ways to reduce diesel emissions,” Burkhart said. The target vehicles include school buses, shuttle buses, off-road equipment, and other diesel vehicles that operate in urban and residential areas. Burkhart said the program also would focus on projects located in the Chicago and Metro-East nonattainment areas in reducing ozone precursor emissions and particulate matter. “The diesel engine and off-road equipment industries are very important to the state’s economy,” Burkhart said. “This grant program will assist these manufacturers and the local equipment distributors in Illinois by helping to increase their revenues through the sale of clean diesel products and, in the process, retain or create new jobs.” The Plote project fits perfectly with the goals of the program and was approved within two weeks of the application last fall, Bayne said. The clean diesel program will pay half of the total project cost. Plote will pay the rest. Getting the grant approved was just the see PLOTE page 18

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 13

913-371-3822 Contact: Doug Mehner / David Mehrtens Doug’s Cell 913-915-1607 email: dmehner@roadbuildersmachinery.com Locations in KS, MO & NE

www.rbused.com

1996 Cat CB534B, 84” Double drum roller, approx. 6953 hrs, Eq# 91261 ......................................$19,500

2004 Cat 330MH Material Handler, 6’ fixed raised cab, Approx. 50' reach, approx. 7490 hrs ....$289,500

1999 Fiat FD255 Crawler Dozer, multi shank rear ripper, approx. 4200 original hours, U/C is approx. 60% life remaining ..................................................$93,500

2006 Komatsu PC200LC-7, Cab, A/C, 32” Pads, Long Stick, Hydraulic Thumb, Approx. 3200 Hrs ....$99,500

2005 Komatsu WA150-5, Cab, A/C, JRB Coupler & GP Bkt, Aux. Hydraulics, Approx. 980 Hrs ............$74,500

2005 Komatsu PC750LC-7, Cab, A/C, 40” track pads, 12’ arm, JRB coupler and 82” bucket, approx. 5270 hrs ................................................................$379,500

2003 Komatsu WA450-5, Cab, A/C, 5 cu.yd. GP bucket, Approx. 9150 hrs, Eq# 80991 ....................$99,500

1999 Komatsu WA700-3, Cab, A/C, 11 cu. yd. Smooth lip bkt., approx. 19,600 hrs ..........................$379,500

2001 Cat 322BL, Cab, A/C, 42” GP Bkt w/Hyd. Thumb, Recent Rails & Sprockets, Approx. 7820 Hrs ..$69,500

2006 Metso LT1213S Impact Crusher, Approx. 2300 hrs ................................................................$497,500

NPK Hammers we have used or rental return hammers for sale all sizes and will fit any model excavator ..............................................................Call

2003 Fuchs MHL360 Rubber Tire Machine, Approx. 60’ Reach Hydraulic Raise & Lower Cab, Approx. 10,200 Hrs ....................................................$289,000

Page 14 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

U.S. Army Personnel Visit Case for Skid Steer Startup

Tom McLaughlin, brand communications manager of Case Construction Equipment, group welcomes everyone to the CNH Wichita, Kan., plant. TROOPS from page 1

brated the completion of these skid steers with plant tours, special guests and executive speeches. U.S. Army Col. Darrell Bennis, was on hand to meet the workers, who have had a hand in the production of these vehicles designed for Afghanistan. The military M400W skid steer and M400T compact track loader are equivalent in size and general specs to the construction/farm models 420 series 3 skid steer loader and 420CT series 3 compact track loader, respectively. The machines are modified to the military’s special requirements. Some of the modifications include: lifting and tie-down points for transport loading and securing, weapons rack and fire extinguisher, 24 volt starting and charging system to match all military vehicles, removable steel crawler tracks (M400W), a fuel injection pump that enables the equipment to use NATO (North American Treaty Organization) jet fuel, NATO slave cable receptacle that allows the machine to provide an electric jump-start to other military vehicles, ISO pattern joystick pilot controls, a minus 25 degree F cold start capability and a chemical agent resistant coating finish on all exterior painted surfaces. Vehicle attachments are shipped with each machine in custom designed containers for security and rapid deployment. These machines have been tested to withstand parachute drop-offs and verified radiated electronic emissions to

Simon Boag, executive vice president, manufacturing worldwide, of Case Construction Equipment, gives a manufacturing overview for Case construction equipment.

The CNH Wichita, Kan., plant ships skid steers and compact track loaders worldwide. This Case 420CT is being shipped to Australia.

Case Construction Equipment welcomed guests from the U.S. Army TACOM (Tank-automotive and Armaments Command) to the CNH plant in Wichita, Kan., to commemorate its recent military skid steer production startup.

confirm non-interference with communications. This Army contract ordered 3,400 units, all to be built at the Wichita, Kan. location. The long-term contract calls for as many as 1,900 skid steers and nearly 1,500 compact track loaders. The project is a boon to the Wichita plant, the local economy and has allowed furloughed workers to be called back to the plant.

The ceremonies celebrated both this new project and CNH’s history of supporting the U.S. military. Everyone wins with this arrangement—the Army gets customized equipment, the economy gets pumped, Americans are put back to work and the U.S. troops overseas get the tools they need to get their job done. see TROOPS page 48

CNH plant workers sport the CNH T-shirts, showing their support of the troops in Afghanistan.

Skid steer loaders going to Afghanistan are equivalent to the size and specs of a commercial Case model, but also includes the unique requirements of military vehicle.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 15

Announcing of a good thing. Faster cycles.less Higher productivity Need a smaller track loader with big performance? Meet JohnThirty-plus Deere Don’t be fooled bythe imitators. CT315. It's experience lightweight and the agile, years’ building best yet it packshydrostatic 45 turbocharged horses into its dozers makes John Deere small the frame to deliver best-in-class brand for you. Innovations, like Total stability, breakout and Machine Controlforce, (TMC), visibility, allow operators wide-open service access. It's a snap to customize machine response and to transport between jobsites, too. operation to their personal preferences. And, with numerous available J-Series Dozers deliver unsurpassed Worksite ProTM attachments, there's productivity and uptime, along with the seemingly no end to the work you'll lowest possible daily operating costs. get done. Stop in and see the big And that’s just for starters. possibilities this small machine can bring to your business. To learn all about John Deere J-Series Dozers, give us a call.

ROGERS & LONG LAKE, MN RDO Equipment Co. Burnsville, MN Matt Dull 952-890-8880 • mdull@rdoequipment.com

KR1CUWF0008N -00231728

Randy Thorstad 13725 Main Street • Rogers, MN 55374 Cell: (612) 840-3464 • Office: (763) 428-4107 Fax: (763) 428-2700 email: randy.thorstad@scharbers.com

Page 16 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bloated Lake Threatening North Dakota Town Again By James MacPherson ASSOCIATED PRESS WRITER

KATHRYN, N.D. (AP) Almost a year after worried authorities went door to door warning residents to flee as water carved through a nearby dam, this tiny North Dakota town is facing the possibility of having to evacuate again because of flooding. Fueled by runoff from a winter of heavy snow, water is swiftly rising behind the Clausen Springs Dam. And Kathryn’s 55 citizens are frustrated that nothing has been done to repair or replace the damaged dam that threatens to break and inundate this blink-and-you-miss-it community,

Louisville Location 2911 S English Station Road Louisville, KY 40299 502-267-4020 • Fax: 502-261-9251 Toll Free: 866-901-2262

about 60 miles southwest of the state’s biggest city of Fargo. “We’re just an itty-bitty town and we don’t carry any clout,” Mayor Dave Majerus said. “If that dam was above Fargo, there would be some concern and definitely something would get done.” Flood worries extend far beyond Fargo and other North Dakota and Minnesota communities along the north-flowing Red River. Heavy, wet snow has caused widespread flooding for other parts of North Dakota, and several communities such as Linton, Lisbon, LaMoure and Jamestown are being fortified with temporary levees and sandbags to beat back the rising water. In Minto, about 16 homes in the community of 300 are threatened by floodwaters, and residents are

Owensboro Location 2235 Ragu Drive Owensboro, KY 42303 270-683-2000 • Fax: 270-683-3727 Toll Free: 877-683-2262

frantically using sump pumps to stay dry. Few of those places, though, are as worried as Kathryn. Stray cats are sometimes more likely to be seen than residents in the town, which boasts little more than a bar, a post office and a church. The problem with the dam near Kathryn is that it was built before state safety standards were in place. The Clausen Springs Dam, which is tucked within rare wooded rolling hills in the area, is fed by a creek that collects runoff from 100 square miles of mostly flat farmland. The earthen dam is about 50 ft. high and 700 ft. long and holds back a lake about the size of 50 football fields. It was built in 1967 for fishing and recreation — not for flood control, said Harlan Opdahl, a Barnes County commissioner. Kathryn residents were evacuated for a few days last April after flooding began eroding the dam’s spillway a few miles from town. Trucks hauled in clay and rocks to fortify the earthen spillway and North Dakota National Guard soldiers in helicopters dropped more than 100 one-ton sandbags to help shore it up. The little town was spared extensive flood damage but it led some to wonder whether it was worth spending big money protect it. State and local governments eventually raised $3 million “by pulling a few strings” to replace the dam but the work may come too late, the mayor said. State officials said it took time to scrape together money for work and no one believed the area would be hit with flooding two consecutive years. The town, founded in 1900, never had a flood threat until last year. “It’s rare to have flooding there one year, let alone back to back,” said Sando, of the North Dakota Water Commission. No one appears more frustrated than Shirley Sivertson, who along with her husband, Sanford, live on the edge of town. Their home is the first in the path of the water if the dam breaks. Last year, the couple evacuated in minutes and returned a few days later to find water in their basement. Shirley Sivertson said the couple doesn’t want to have to flee again this year. “We shouldn’t have to be worrying about all this business with the dam,” she said. “This whole town is sitting on pins and needles,” she said. “If the governor was standing in front of me right now, I’d tell him: ‘Get with it man! We’re just a town of 55 people but we’re just as dang gone important as anybody else.”‘ A new dam designed to handle major flooding is expected to be built later this year, Sando said. Jon Kelsch, the state Water Commission’s construction chief, said it was a challenge to redesign the dam with only $3 million. Initial designs were overbuilt and too expensive. A no-frills design that will do the job has finally been crafted, he said. Opdahl has advocated breaching the dam by cutting a channel through it for a controlled release of water until a permanent fix can be made. But sportsmen in the area balked, he said. “I think we should have siphoned it off until we figured out a plan then we wouldn’t be in this situation,” Opdahl said. Opdahl and others believe that a valve on an outflow pipe used to drain the dam has been tampered with in the past to keep the lake level high for better angling. The drain is now completely open and is being monitored daily, Opdahl said. That doesn’t make residents worry less, or diminish frustration that their neighbors in Fargo and Moorhead seem to get so much more help than they do. “They’ve been worrying about Fargo and Minnesota instead of fooling with us,” Opdahl said.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 17

New Transportation Program Could Get Kan. Back on Track KANSAS from page 1

“But the fact is, it takes far less time for a highway system to deteriorate than it does to build it to the levels Kansans have come to expect,” Miller said. “By the time travelers start to notice a decline in the system, it will be very difficult to improve without spending massive amounts of money.” In the past year transportation spending has been slashed by $257 million, which has policymakers concerned about the 10,000-mi. system’s durability. “We’ve had groups in the past that are not very happy about any tax being raised. But we still have the responsibility of having a balanced budget and we have a responsibility to take care of our highways,” said Morris, a Hugoton Republican. “We have to weigh those responsibilities with the views of our citizens.” A new program emerged from a Senate committee March 30, an ambitious $8.2 billion plan for the next decade that’s financed with new taxes, fees and bonding authority for the state Department of Transportation. The focus will be on all modes of transportation, including mass transit and passenger rail service, as well as traffic flow improvements in urban areas. Legislators will return April 28 to finish the 2010 session, with the state budget remaining to be completed. That’s no small task, especially with Kansas staring at a budget shortfall projected at $467 million. It could be larger after economists meet April 16 to revise tax collection estimates. Gov. Mark Parkinson and a majority of legislators want tax increases to close that gap, but also say a portion of those increases would remain after three years to fund the transportation program. The Senate plan proposes using a 0.3 percent sales tax increase to raise $1.15 billion over seven years. “It’s ambitious to try to adopt a highway plan this year because of the economic situation that we’re in. But the plan I outlined in the State of the State makes sense to me,” Parkinson said. “The Senate has confirmed that idea.” Some of the new projects under way in Kansas resulted from federal stimulus dollars. Those projects were deemed “shovel-ready,” meaning the design and engineering work was complete and ready for crews to lay pavement or replace bridges. “Those construction companies in our state, they need to know that we are still in business and we want to keep them in business in Kansas and provide those quality jobs,” Morris said. The Federal Highway Administration calculates that for every $1 million in spending, 30 jobs are created. Beyond construction, those jobs would come from suppliers, gas stations and grocery stores that support the projects. But Morris said the federal stimulus package fell short of what it could have been as a jobs program had more been dedicated to transportation projects. “[States] ended up with $30 billion out of $800 billion — which, to me, that’s a pittance,” Morris said. “If [Congress] had taken half of that money, that would have provided a lot of quality jobs around the country and made a significant difference in the economy. But they chose not to do that.”

Albert Medcalf Office: (502) 456-4050 Cell: (502) 592-6510

Martin McCutcheon Office: (614) 824-9162

ent Construction Equipm g... Guide Special Pricin G! E C Say You Saw it in

www.ruddequipment.com

TRUCK SALE! 2004 A40D, s/n 11095, 8540 Hrs $250,000

2004 A40D, s/n 11128, 9490 Hrs $250,000

2000 A40, s/n 60536, 8660 Hrs $140,000

1996 A35C, s/n 4373, 15,435 Hrs $75,000

1998 A40, s/n 60198, 12,460 Hrs $110,000

2004 A40D, s/n 11465, 8620 Hrs $250,000

2002 A40D, s/n 60221, 7935 Hrs $200,000

2001 A40D, s/n 60056, 11,535 Hrs $175,000

Page 18 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Plote Construction, Patten CAT Repower Wheel Loaders PLOTE from page 12

first step. Patten had to line up the engines and needed parts, and put together a detailed timeline for project completion. In addition, the agreement came with a deadline: By May 31, 2009, all the work had to be done, bills had to be paid and grant money had to be awarded. The new engines will result in a 50 percent reduction in NOX emissions and a 54 percent reduction in particulate matter (PM). Horsepower will go up as well, from 300 to 318. “Another good thing for everybody is that rather than dumping these machines in a landfill, they will be upgraded for a second life with the possibility of even a third life,” Plote said. “These machines will essentially be brand new.” Details of the Repowering Despite the many challenges in the economy, Caterpillar’s commitment to sustain-

Luke Mueller, Patten Industries service manager, explains the shop process for the Cat 980G wheel loader repower program.

David Brimhall is the sales manager of Caterpillar Access Account Corporation.

The Cat 980G, stripped down to its frame.

ability has not wavered. In fact, the economic downturn has helped secure sustainability’s place at the core of the company’s strategy. “Even tighter emissions regulations and rapidly increasing customer focus on sustainable business practices are boosting the demand for the retrofitting of new emissions technologies on working diesel engines,” said Paul Cook, emissions territory manager of Caterpillar Emissions Solutions. During 2009, Cat Emissions Solutions accelerated the development of emissions retrofit products to meet the growing customer demand for lower emissions from their older equipment. Plote’s 980G wheel loaders are a good example of that trend, Cook said. Caterpillar didn’t have an emissions solution developed for the 980G model yet. The Plote machines were the pilot project. During the repower, each of the wheel loaders received a new ACERT engine, rebuilt torque converters, axles, differentials, brakes, radiators and any other improvements made to the wheel loaders since the machines were manufactured. Approximately 200 tests and inspections of power train components were performed, and approximately 3,000 parts were replaced or reconditioned, including power train electrical switches, sensors, sending units, electronic control modules, engine wiring harnesses, bearings, gaskets, seals and coolant hoses. The power train was rebuilt with critical engineering improvements and updates. Once the machines were in the field again, the solution would be rolled out to other dealers across the nation. “What’s also unusual about this upgrade is just how far it goes. These machines are going from Tier 0, or unregulated engines, to a Tier III, which is the cleanest engine avail-

able on the market. That’s pretty significant. You don’t see that a lot,” Cook said. “In the Midwest, you’ll see machines go from unregulated to a Tier I, but in this configuration, they’re jumping all the way from unregulated to a Tier III, which is why this is such a significant project.” Working for the Future “Helping customers find innovative and economical ways to keep machines working isn’t just good business,” said Larry O’Neill, Patten’s general manager. “It’s part of Patten’s DNA as a company. Helping to keep the environment clean is also part of Patten’s mission. “We realize we need to be stewards ourselves: our children and our grandchildren need to have clean air to breathe in the future,” O’Neill said. “It’s great to sell a see PLOTE page 32

Garrett Patten (L), dealer principal and general manager of construction products, Patten Industries, explains how the new Cat 980G wheel loader engines will result in a 50 percent reduction in NOX emissions and a 54 percent reduction in particulate matter (PM), while Dan Plote (R), president of Plote Construction, awaits his turn to speak.

Bill Bayne, environmental and safety manager of Patten Industries, explains the many benefits of the Tier III engines.

The Cat 980G, going through the repower process.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 19

10 REASONS ROCKLAND THUMBS ARE THE BEST 1. Patented Thumb Locks (U.S. Patent 6,209,237) No drift down with Rockland hydraulic thumbs. No slop or accelerated pin wear! 2. Cylinder Rod Protection Another Rockland exclusive, all Rockland hydraulic thumbs are equipped with cylinder guards.

6. Narrow Design No width or interference problems. Positive 3-point pickup. 7. Coupler Length Options Couplers usually require longer thumbs. Rockland has it figured out.

3. Heat-treated Replaceable Bushings and Pins All pivot points are sealed and lubricated.

8. Wide Thumb Option If your application demands a wide thumb, specify a Rockland wide thumb and get all the other exclusive Rockland features.

4. Easy Transport Rockland thumbs will never hit your excavator’s boom when in the transport position. You don’t have to remove a Rockland thumb in order to transport your machine.

9. Easy Installation Rockland thumbs quickly mount to the underside of the excavator stick. No special pivot pins are required.

5. Lightweight Better machine performance. Why sacrifice capacity hauling around more steel than you need?

10. Quick Shipment Order from your favorite dealer today. If he doesn’t have one in stock, we do!

800-458-3773 r o c k la n d m f g.c o m

Page 20 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

e rv ic

ic e s s e rvi ce s erv s e ss rv

What goes around comes around. The best measure of a crane company is how they stand behind their promises ... to their customers, their suppliers, and their manufacturers. At ALL, we stand behind every piece of equipment with timely support, service, and parts. We continually invest in our people, our ﬂeet of equipment, and training. And with branches throughout North America, we’re there when you need us. Because that’s what you expect from a leader.

ce se WWW.JJSCHECKEL.COM

HEAVY EQUIPMENT SALES, RENTAL, SERVICE, and PARTS SOLUTIONS P: 563.872.4112 EMAIL: SALES@JJSCHECKEL.COM TRACK TYPE TRACTORS 1993/2009 CAT D10N.................... $590,000 1990 CAT D10N............................ $290,000 1996 CAT D8R...............................$169,000 1994 CAT D8N................................ $98,000 1999 CAT D6R XW........................... $98,000 1997 CAT D6R LGP...........................$89,000 1998 CAT D6R LGP...........................$78,000 2003 DEERE 750C LGP..................... $78,000

MOTOR SCRAPERS & TRUCKS OTHER EQUIPMENT (2) 1990 CAT 631E.................$128,000 EACH GROVE AP 308, 8.5 TON CRANE.........$16,000 (2) 1997 CAT 627F................. $185,000 EACH BRODERSON IC80, 8.5 TON CRANE.... $14,000 (2) 1988 CAT 627E.................$138,000 EACH 2001 REYNOLDS 17E 10.5 PULL SCRAPER............................ $18,500 COMPACTION & ATTACHMENTS, RIPPERS, BLADES........CALL!! DIRT PREPARATION

1986 CAT 815B............................. $125,000 (9) 48” & 60” SHEEPSFOOT.... $4,500-$14,500 (5) ROME OFFSET DISKS....... $7,000-$16,000

VISIT WWW.JJSCHECKEL.COM TO VIEW PICTURES AND DETAILED INFORMATION ON EACH MACHINE.

CALL FOR THE BEST PRICES ON UNDERCARRIAGE and REPAIR PARTS IN THE INDUSTRY! The parts we sell are some of the best in the industry, 1L0ESS-5TH0A% N manufactured by quality ISO 9001 manufacturers. Parts proven reliable in the most extreme conditions. Call our Parts OEM Department at 563.872.4112 today for all your parts needs!

AUTHORIZED DISTRIBUTOR: DISTRIBUTOR

100%

Q SATISUALITY GUA FACTION RAN TEE

21582 HWY 62, BELLEVUE, (DUBUQUE) IOWA

We have a yard nearby. Call 800-232-4100 or go to:

www.allcrane.com/Locations.aspx © ALL Erection & Crane Rental Corp., an Equal Opportunity Employer

Carleton Equipment Named New Doosan Dealer in Mich. Doosan Infracore Construction Equipment has named Carleton Equipment Company, headquartered in Kalamazoo, Mich., its new dealer for heavy excavators and wheel loaders for the state of Michigan. Carleton will serve the Michigan market from its four locations in Kalamazoo, Grand Rapids, Saginaw and Metro Detroit. Founded in 1938, Carleton Equipment Company is Michigan’s largest premier Bobcat dealership network and will provide complete sales, service, parts and rental support for the Doosan heavy product line throughout the entire state of Michigan. Carleton Equipment Company focuses its dealership model on providing its customers with specialized product support at every level. With more than 70 dealer support employees, 10 field service trucks, job-site product specialists, full-line rental, rapid response parts ordering and machine recon-

ditioning and remarketing, Carleton Equipment Company is a one-stop-shop for its customers. “We are excited about growing our busi-

Founded in 1938, Carleton Equipment Company is Michigan’s largest premier Bobcat dealership network. ness in the state of Michigan,” said Todd Simmons, general manager of Carleton Equipment Company. “Adding Doosan to our line of equipment will help us continue to provide the best equipment and support possible to our existing customers and to the many new customers that we will acquire.” For more information, visit www.carletonequipment.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 21

LUBY EQ. PRE-OWNED EXCAVATORS

1992 KOBELCO SK60 - CAB, 18"-ST, 14,800lbs, 24"-TOOTH, GOOD-C, 6390-H, SPRINGFIELD, IL (47971) $18,900

2006 CASE CX210 - 46k, CAB,AC, HEAT, 32"-ST,AUX-HYD, C-CHANGE, A-GREASE, RADIO, BUCKET SOLD SEP, GOOD-C, 1010-H, SAINT LOUIS, MO (47616) $105,600

SKID STEERS

2005 CASE 450CT - ROPS, 17.7"-RT, RIDE-C, M-DISCON, G-HEAT, 84"-TOOTH, GOOD-C, 1465-H, SAINT LOUIS, MO (47957) $27,900

2005 CASE 410 - ROPS, 59 HP, FOOT-T, 10X16.5/GOOD, 64"-TOOTH (LONG LIP), GOOD-C, 810 HRS, SAINT LOUIS, MO (48328) $13,500 BACKHOE LOADERS

2006 CASE CX36B - CAB,AC 7.7k, AUX-HYD, 11.8"-RT, C-SWING-B, ZERO-TS, C-CHANGE, BLADE, 24"-TOOTH, GOOD-C, 715-H, SAINT LOUIS, MO (47902) $32,400

RED TAG Sales Event Save During Patten’s 2-Day Inventory Reduction* Sales Event June 10 & 11: 8:00 AM to 4:00 PM 635 W. Lake St., Elmhurst, IL 60126 Hourly Door Prizes** Special 0% Financing on Select Machines*** 10% Off Parts & Labor **** Plus More... For complete listing and more information, visit www.pattencat.com or call (877) 688-2228 * Offers Valid On Selected “Red Tag” Inventory Only. ** Must be present to win hourly door prize. *** Financing subject to credit approval by CAT Financial. Additional terms and conditions may apply. This offer cannot be combined with other offers. Down payment may be required. Rates subject to change without prior notice. Excludes prior purchases. Offer valid June 10 thru June 11, 2010 for machines purchased at this event only. ****Offer valid on service work for machines purchased at this event only. One time, in shop only. Offer cannot be combined with other rebates and discounts. Excludes prior purchases. Offer valid thru December 31, 2010.

1992 CASE 580 SUPER K - CAB, HEAT, 4x4, X-HOE, 2-LEVER, 83"-LOADER (4 &1),WAIN ROY (36", 24", 12", & FORKS), GOOD-C, 8050-H, SAINT LOUIS, MO (48172) $21,200

Custom Made Products Co. Humboldt, IA (800) 760-7871 Call Anytime • Cell: (515) 368-2200 50 to 60 Scrapers on Hand at 7 Locations FOR SALE OR FOR RENT Iowa Locations: Humboldt, Adel, Iowa Falls, Union, Manchester, Dunlap Nebraska Location: Tecumseh

2001 TAKEUCHI TB135 - CAB,AC, HEAT, 7.8k, 14"-RT(EXCELLENT),AUX-HYD, C-CHANGE, BA-ALARM, RADIO, BUCKET SOLD SEP, GOOD-C, 3735-HOURS, SAINTLOUIS, MO (48016) $15,400 TRENCHER

2002 BRADCO 635 TRENCHER UNI-COUPLER, 5"-CUT, DIRT-T, 6' DEPTH, REG-FLOW, GREAT C, SAINT LOUIS, MO (48260) $2,200

Contact Ted Rose or Tim Luby

636-343-9970 www.lubyequipment.com

www.gncmp.com 2001 CASE 580 SUPER M - CAB,AC, 4x4, X-HOE, RIDE-C, 2-LEVER, BH-COUPLER, 24"-TOOTH, GOOD-C, 5605-H, SAINT LOUIS, MO (45576) $43,400

We Will Not Be Undersold!

Free Delivery!

18yd Ashland I-180 TS2s (New & Used) $30,000-$60,000

1998 NEW HOLLAND 2120 - ROPS, 4x4, REG-HOE, 4-SP, 3-POINT-H (PTO), 61"-LOAD W/QUICK ATTACH, 41" & 24"-BUCKETS, 1090-H, GREAT-C, CAPE GIRARDEAU, MO (45274) $19,200

MO: Saint Louis, Cape Girardeau, O’Fallon IL: Quincy, Caseyville, Springfield

11YD Ashland I-110 XL2s (2009s & 2010s) $28,000-$32,000

ART’S-WAY

BIG DOG

14’ Art’s-Way Graders, (New & Used) ..........................................Call

8yd Big Dogs, (New & Used) ........................................................Call 6 1/2yd Big Dogs, (New & Used) ..................................................Call 5yd Big Dogs, (New & Used) ........................................................Call 12’ Feedlot Box Scrapers..............................................................Call 10’ Feedlot Box Scrapers..............................................................Call 12’ Box Scrapers ..........................................................................Call 10’ Box Scrapers ..........................................................................Call

ASHLAND 18yd Ashland I-180 TS2s, (New & Used)......................................Call 17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call 15 1/2yd Ashland I-155 TS2s, (New & Used) ..........$46,000-$57,000 15 1/2yd Ashland I-155 XL2s, (New & Used) ..........$35,000-$58,000 13yd Ashland I-130 TS2s, (New & Used)......................................Call 13yd Ashland I-130 XL2s, (New & Used)......................................Call 11yd Ashland I-110 TS2s, (New & Used) ................$35,000-$37,000 11yd Ashland I-110 XL2s, (New & Used) ................$28,000-$32,000 9yd Ashland I-900s, (New & Used) ..............................................Call Ashland Groundhog GH2500, (New & Used)............$10,000-$12,000

ROWSE 7yd Rowse Model 7002 & 7004, (2009s-1010s) ..........................Call 5yd Rowsw Model 7002 & 7004, (2009s-2010s)..........................Call 3yd Rowse Model 3002, (2009s-2010s) ......................................Call

GARFIELD

MISCELLANEOUS

12yd Garfield Model 1150s, (New & Used) ............$24,000-$28,000 8yd Garfield Model 850s, (New & Used) ................$16,000-$18,000 5yd Garfield Model 550s, (New & Used)................................$14,000

14’ & 16’ Johnson Graders ..........................................................Call 1 1/2yd & 3yd Durabilts Model DP60 & DP84, (New & Used) ....Call 3/4 yd G&A Mini Scraper, (New & Used)..................................$3,000 8’ Hoelscher PT-8 Lawn Roller, (New) ....................................$2,250 4’ Dura Grade Model DG4E Electric Lift, (New) ........................$Call

IMC 12yd IMC Dolly Ejection, (Used) ............................................$25,000

Page 22 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

All New in Box CALL Toll Free

800-523-2200 Ext. 197 Allis-Chalmers HD-3 Dozer w/Backhoe, 1:16 Scale ............$60

Bantam C-35 Dragline,1:50 Scale ..................................$65

Allis-Chalmers HD-3 Dozer w/Backhoe, 1:16 Scale....$60 Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ..........$80 Bantam C-35 Crawler Backhoe, 1:50 Scale ................$70 Bantam C-35 Crawler Shovel, 1:50 scale....................$65 Bantam C-35 Dragline, 1:50 Scale ..............................$65 Bobcat A300 Wheel Loader, 1:25 Scale ......................$55 Bobcat S175 Skid Steer Loader, 1:50 Scale................$18 Bobcat S205 Skid Steer Set ........................................$55 Bobcat M610 Golden 50th Anniversary Skid Steer Loaer ....................................................................................$50 Bobcat Tractor/Trailer Set, 1:50 Scale ........................$80 Caterpillar No. 12 Motor Grader, 1:87 Scale ..............$25 Caterpillar 140H Motor Grader w/ripper & scarifier, 1:50 Scale ............................................................................$40 Caterpillar 825 Soil Compactor, 1:50 Scale ................$35 Caterpillar 420E Backhoe/Loader, 1:50 Scale ............$45 Caterpillar D6K XL Track Type Tractor, 1:50 Scale......$45 Caterpillar D10T Track Type Tractor, 1:50 Scale ........$75 Caterpillar D11R Track Type Tractor, 1:50 Scale ........$45 Caterpillar D11T Track Type Tractor, 1:50 Scale ........$70 Caterpillar 980G Wheel Loader, 1:50 Scale................$35 Caterpillar 992 Wheel Loader, 1:50 Scale ..................$50 Caterpillar 994F Wheel Loader, 1:50 Scale ................$95 Caterpillar 226B2 Skid Steer Loader w/tools, 1:32 Scale ....................................................................................$30

Caterpillar D10T Track Type Tractor, 1:50 Scale ............$75

Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ....................................................................................$40 Caterpillar D5G XL Track Type Tractor, 1:50 Scale ....$55 Caterpillar D8R Track Type Tractor, 1:50 Scale ..........$40 Caterpillar Vintage Twenty Tractor w/metal tracks, 1:16 Scale ............................................................................$70 Caterpillar 302.5 Mini-Excavator, 1:32 Scale ............$30 Caterpillar 320C Excavator, 1:50 Scale ......................$35 Caterpillar 336D Excavator, 1:50 Scale ......................$65 Caterpillar 511 OB Excavator, 1:50 Scale....................$65 Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ..$30 Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .. ....................................................................................$40 Caterpillar 365C L Front Shovel, 1:50 w/metal tracks $70 Caterpillar 963D Track Loader, 1:50 Scale ....................$45 Caterpillar 977 Traxcavator, 1:50 Scale ......................$25 Caterpillar 611 Motor Scraper in display case, 1:64 Scale ............................................................................$25 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale$45 Caterpillar 725D Articulated Truck, 1:50 Scale ..........$30 Caterpillar 775E Off-Highway Truck in display case, 1:64 Scale ............................................................................$25 Caterpillar 777D Off-Highway Truck, 1:50 Scale ........$40 International TD-24 Military Dozer, 1:50 Scale ..........$50 JCB 3CX Backhoe Loader, 1:50 Scale..........................$50 JCB 456 ZX Wheel Loader, 1:50 Scale ........................$65 JCB Vibromax VM 115 Soil Compactor, 1:50 Scale ....$45 John Deere MC Crawler Dozer, 1:16 scale..................$75 John Deere 320 Skid Steer Loader, 1:16 Scale ..........$45 John Deere 850J Dozer, 1:50 Scale ............................$40 Komatsu 960E Mining Truck, 1:50 Scale ..................$275 Komatsu PC300LC-8 Excavator, 1:50 Scale ................$70 Komatsu WA500-6 Wheel Loader, 1:50 Scale ............$60 Komatsu D51 EX Dozer, 1:50 Scale ............................$60 Komatsu D51 PX Dozer, 1:50 Scale ............................$55 Komatsu D375 Dozer, 1:50 Scale ................................$75

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu GD655 Motor Grader, 1:50 Scale..................$60 Komatsu WB146 Backhoe Loader w/tools, 1:50 Scale$45 LeTourneau Super C Scraper w/Cab, 1:50 Scale ........$80 Link-Belt 210 X2 Excavator, 1:40 Scale ......................$65 Northwest 25-D Shovel, 1:50 Scale ..........................$100 Northwest Model 25-D Backhoe, 1:50 scale ............$100 Oliver OC-12 Crawler Dozer, 1:16 scale ......................$50 Oshkosh Front Discharge Mixer Truck, 1:34 scale......$70 Peterbilt Tractor/Trailer w/Caterpillar D8R, 1:50 Scale .... ..................................................................................$100 Volvo G970 Motor Grader, 1:50 Scale ........................$65 Volvo SD-122 Soil Compactor, 1:72 Scale ..................$45 Volvo A25C Articulated Truck, 1:50 Scale ..................$30 Volvo A25D Articulated Truck, 1:50 Scale ..................$45 Volvo A40D Articulated Hauler, 1:50 Scale ................$50 Volvo BL71 Backhoe Loader, 1:50 Scale ....................$45 Volvo EC 210 Excavator, 1:50 Scale ............................$45 Volvo EC210C Excavator, 1:50 Scale ..........................$60 Volvo EC240B Excavator, 1:50 Scale ..........................$45 Volvo FH12 Tractor/Trailer w/Volvo L150C, 1:50 Scale .... ....................................................................................$60 Volvo L90E Wheel Loader, 1:50 Scale ........................$65 Volvo L60E Wheel Loader w/Attachments, 1:50 Scale$65 Volvo L350F Wheel Loader, 1:50 Scale ......................$80

Caterpillar 336D Excavator, 1:50 Scale................................$65

Shipping and Handling Additional

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 23

Phone: 502-493-4380 Fax: 502-499-3180

With Kubota Engines, The Sky’s The Limit.

ron_weir@bramco.com

www.brandeismachinery.com

Used Equipment

2002 Komatsu 1998 Komatsu WA500D275AX-5 Dozer, 3 Wheel Loader, GP 12,463 Hrs, EROPS, Bucket, BT9N02 ............ SU Blade, New U/C ...... ........................$38,500 ......................$192,500

1999 Blaw Knox PF4410 Track Paver, w/Cummins, 8’ Wedgelock Screed w/2.5 Extensions, BTF0301 ..........$30,000

Please call or check out our Web site for our Certified Rental Fleet Reduction Sale!

Rockford, Ill…

Casey Equipment to Offer Wacker Neuson Products Casey Equipment, a distributor of construction equipment in the Rockford, Ill., area, has added the Wacker Neuson line of light construction equipment to its product mix. Casey Equipment recently moved into its new facility located on Huntwood Drive in Cherry Valley, Ill. This location offers Wacker Neuson’s line of vibratory rammers, plates, rollers, laser levels, breakers, saws and pumps. “We are excited about this partnership. This is a great way for us to expand our business and equipment line available to contractors in our area,” said Jim Cox, president of Casey Equipment. “Wacker Neuson has an excellent reputation in the industry and is known for their equipment. The combination of quality equipment and our dedication to customer service will serve our customers well.” Casey Equipment has been serving the Rockford area for three years offering sales, service and rental of equipment. The 9,000 sq. ft. facility, located on a four-acre site, has been opened since the fall of 2009.

Clean Running Diesel Engines from 5.6 to 99 HP for OEM, Irrigation, Replacement and Industrial Power Applications

Get the latest news online.

Visit CEG’s Web Site at www.construction equipmentguide.com

Your complete source of engine and generator power

314-868-8620 U www.ckpower.com

In St. Louis, ask for John Costello U In Illinois, ask for Dan Fichter In Missouri & Kansas, ask for Bob Balsat

TRADESHOW

DEMO 2010 CAT 252B SERIES II 78 HP Turbo Diesel, 2 Speed, Pilot Controls, Aux. Hydraulics, Enclosed Heated Cab w/ Wiper, Front and Rear Work Lights, New GP Bucket, Never Seen Dirt 5.9% Financing* • $3000 Down • $509/Month

$28,500 Warranty

*with approved credit

708-878-7070

Page 24 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Y O U R G R A D E R O P E R AT O R D E S E R V E S A B R A K E ! It’s time to put a stop to small-time thinking in small graders! Here’s one way Champion helps you think big for professional results and productivity: ... every Champion Motor Grader is equipped with pedal-operated service brakes supplied by a separate hydraulic pump. Dual brake circuits ensure balanced braking on both sides of the grader for better control and safety. We think small graders should offer the same performance as the big guys. If you think like we do, we have a lot more ideas to show you. Take a brake! Give Champion a call...

www. ch ampionmotor gr ade r s .us

Tel: 704.392.1038

Champion... The Best on Earth

Charles Machine Works Acquires HammerHead

IT TAKES GROUNDBREAKING TECHNOLOGY TO BE THE BEST AT GROUNDBREAKING. The New Kubota KX71-3 Compact Excavator Breakout force: 3,285 lbs. (arm) 6,350 lbs. (bucket) The most in its class 27.5 HP Kubota diesel engine Variable displacement pumps 18" tailswing overhang Large operator space Digital diagnostics Double-opening bonnet

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100

www.kubota.com EVERYTHING YOU VALUE

CHAMPION SALES & SERVICE IN WISCONSIN Volvo Construction Equipment & Services Milwaukee, WI 414-461-7810

The Charles Machine Works Inc. (CMW), manufacturer of Ditch Witch underground construction equipment, has acquired 100 percent ownership of HammerHead Trenchless Equipment, manufactured by Earth Tool Company LLC (ETC) of Oconomowoc, Wis. This acquisition makes ETC a wholly owned subsidiary of CMW. Hammerhead designs and manufactures piercing tools, bursting systems, pneumatic hammers and horizontal directional drill tooling. For more information, visit www.ditchwitch.com.

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ May 1, 2010 â€˘ Page 25

Gibson Machinery, LLC Cleveland, OH 440/439-4000

Healy Machinery Company Sioux Falls, SD 605/336-0411 Rapid City, SD 605/348-7438 Aberdeen, SD 605-725-4364 Lano Equipment, Inc. Anoka, MN 763/323-1720 Shakopee, MN 952/445-6310 Luby Equipment Quincy, IL 217/222-5454 Caseyville, IL 618/397-9971 Fenton, MO 646/343-9970 Oâ€™Fallon, MO 636/332-9970 Cape Girardeau, MO 573/334-9937 Rex Spencer Equipment Co. Belton, MO 816/331-6078 RTL Equipment, Inc. Grimes, IA 515/986-0262 Gretna, NE 402/332-2004

! ! $ ! ! $ " " " ! ! ! ! $

$ !

$ $ ! # !

Walter Payton Power Equipment, LLC Evansville, IN 812/422-6912 Lebanon, IN 765/482-4145

Page 26 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

100%

productive

Komatsu backhoe loaders are designed to deliver. Attention to every detail ensures the highest levels of operator safety, comfort and convenience, productivity, ease of service, durability, reliability and quality. Komatsu backhoe loaders provide the ultimate comfort and productivity package. • • • • •

Low-effort Proportional Pressure Control (PPC) loader and backhoe joysticks with SAE/ISO pattern changer Spacious and ergonomically designed operator platform and exceptional visibility Narrow S-shaped backhoe boom and high-performance hydraulics Tilting engine hood with easy access to service check and ﬁll points Heavy-duty, 1.25-yard loader with parallel lift and over 6½ tons breakout force

When you want the most from your backhoe loader investment, the choice is 100% clear. Put a Komatsu backhoe loader to work today and enjoy the conﬁdence that comes from machines that are…

KA08

100% Komatsu.

866.513.5778

www.komatsuamerica.com

COLUMBUS EQUIPMENT COMPANY

ROAD MACHINERY & SUPPLIES COMPANY

www.columbusequipment.com

www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8671 800/888-9535 Grand Rapids MN 218/328-5916 800/459-5916

65 East Kingston Ave. Columbus, OH 43207 614/443-6541 614/443-9673 Fax Toledo, OH 419/872-7101 Cincinnati, OH 513/771-3922

Richfield, OH 330/659-6681 Cadiz, OH 740/942-8871 Dayton, OH 937/879-3154 Canton, OH 330/453-4521

Painesville, OH 440/352-0452 Jackson, OH 740/288-0222 Piketon, OH 740/289-3757

Virginia MN 218/741-9011 800/752-4304 Des Moines IA 218/741-9011 800/555-1445 Sioux City IA 712/252-0538 800/633-9104

Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 W Main Ave Fargo ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND 58072 800/825-0479

2300 Vermont Avenue Bismarck ND 58504 800/279-4437

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 27

Nortrax Hosts Open House at Eau Claire Site With Test Drives an Event Highlight AIS CONSTRUCTION EQUIPMENT CORP. www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586/727-7502 Fax: 586/727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax South Bend, IN 574/233-8770 574/233-8775 Fax

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 800/252-2926 Bolingbrook, IL 630/739-7474 800/826-9608 Carterville, IL 618/985-3399 800/274-7202 Marengo, IL 815/923-4966 800/765-2635 Portage, IN 219/764-8080 888/764-8226 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 800/274-7230 Cape Girardeau, MO 573/334-5252 800/274-7210 Columbia, MO 573/814-0083 800/274-7212 Palmyra, MO 573/769-2056 800/274-7214 600 Liberty Street, Green Bay, WI 54304 920/435-6676 920/435-5454 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville WI 262/835-2710 262/835-2844 Fax Wausau, WI 715/355-9898 715/241-0044 Fax

ortrax held an open house April 16 and 17 at its Eau Claire, Wis., location offering visitors a chance to test drive equipment, speak with equipment experts, attend workshops and enjoy some good food. Representatives were on hand from Sakai, Morbark, Topcon, Monroe, Falls and Paladin for the two-day event. Equipment available for test drives included the new John Deere 764 high speed dozer with Topcon MC2 grade control system, 844K wheel loader, 333D compact track loader, DSeries excavators, J-Series dozers and backhoe loaders, GSeries motorgraders and John Deere forestry equipment. see NORTRAX page 33

At the controls of this John Deere 200D is Pete Passuellow of Cutting Edge Excavators, Eau Claire, Wis.

Rob Newman (L) of Nortrax shows this Hitachi Z210W to T.J. Clisch of Baraga Road Commission.

Kyle Zich (in cab) of Cutting Edge Excavators gets some instructions from John Deere's Doug Braswell on the John Deere 764 high speed dozer equipped with a Topcon 3D MC2.

Mark Knutson of Garfield, Wis., tests out this John Deere 333D compact track loader.

(L-R): Art Tickler of Springbrook, Kurt Bruchert of Nortrax and Paul Jacobson of Springbrook stand in front of the new John Deere 770D motorgrader that was purchased by the town of Springbrook.

(L-R): Jason Christainson of Precision Dirt Works talks with Positioning Solution Co. President Jerry Bickner and Tom Walrath, also of Positioning Solution Co., Waukesha, Wis.

Taking a look at the John Deere 1270 harvester (L-R) are Jim and Kent Janko, Shawn Vetterkind of Nortrax and Joe Morfoot.

(L-R): Enjoying some lunch at the open house are Mark and Jordan Erickson of Erickson Excavating, Cumberland, Wis.; Dan Schwandt of Nortrax; Chase Lapcinski of Push Inc., Rice Lake, Wis.; and Travis Erickson of Erickson Excavating.

Page 30 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Howell Tractor 811 Sivert Drive Wooddale, IL 60191-2611 847/439-2150 Fax: 630/595-3855 2770 May Road Peru, IL 61354 800/342-6072 Fax: 815/224-2538 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220 5444 11th St. Rockford, IL 61109 888/469-3555 Fax: 815/874-3034

The Victor L Phillips Company

Mid Country Machinery

4100 Gardner Ave. Kansas City, MO 64120 816/241-9290

3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936

Garden City KS 620/275-1996

4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710

Topeka KS 785/267-4345 Wichita KS 316/838-3346 Joplin MO 417/781-8222 Springfield MO 417/887-2729

106 8th Street Sergeant Bluff, IA 51054 712/943-4470

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 31

RELY On Expertise Air Compressors Generators Light Towers Light Compaction

The Victor L. Phillips Company 4100 Gardner Ave. Kansas City, MO 64120 (816) 241-9290 Joplin, MO (417) 781-8222

Wichita, KS (316) 838-3346 Topeka, KS (785) 267-4345 Garden City, KS (620) 275-1996

Brookline Station, MO (417) 887-2729

McAllister Equipment Co. 150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 (630) 530-1901 Alsip/Chicago (708) 389-7700 E. Peoria (309) 694-4455

Ingleside (815) 344-0880 Rockford (815) 227-0555 Springfield (217) 789-0351

Roland Machinery Co. 4670 Crossroads Industrial Drive Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252

Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399

Aspen Equipment Company 9150 Pillsbury Ave. S Bloomington, MN (952) 888-2525 Fax: (952) 656-7159 www.aspenequipment.com

Page 32 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Plote, Patten Team Up to Help Repower Aging Wheel Loaders PLOTE from page 18

A firm believer in strong foundations Are you responsible for meeting tight deadlines without compromising on quality? At Dynapac, we put all our knowledge and many years of experience into the making of high performance compaction and concrete equipment. We offer an extensive range of large and small construction equipment that are user friendly, rugged and flexible to your needs. We stand behind you all the way with service and spare parts to ensure your project runs smoothly. Check with us first, when you need heavy duty compaction and concrete equipment that won’t let you down.

machine and the parts and service, but if we’re not a proactive partner then we’re really not doing what’s needed today and in the future. “Patten increased its efforts to help customers deal with changing emissions standards about two years ago,” O’Neill said. “The move reflected a core Patten philosophy: The dealership doesn’t consider itself strictly as a vendor, but as a partner.” As such, Patten strives to identify possible challenges and outline solutions for its customers. Much of Patten’s staff time is spent making sure customers are aware of the emissions changes that are either coming or being contemplated and what those mean to their businesses. “If you’re aware of it, and it’s part of your planning, when anything does occur in regulations, our customers are going to be well prepared and educated about their options and opportunities,” O’Neill said. “When you look at problems and challenges, you usually see opportunities at the same time. You just have to have a positive attitude that there’s something good in everything that occurs.” Garrett Patten, dealer principal and general manager of construction products, agreed with O’Neill believing “we’re all aboard the same ship here and we’re trying to navigate the economic waters that are pretty rough right now. We keep asking ourselves, ‘Where can we make a difference for our customers?’” Both men considered the government

funding a “win-win-win” situation for everyone: It helps the customer update its fleet, helps the dealership keep its staff working and it’s helping improve air quality in the region. “If we look at the fact that during these economically challenging times, we’re taking three unregulated machines, bringing them up to Tier III standards—and at the same time we also have 10 more technicians in our shops that have jobs — that’s a real bonus,” Patten said. “For Dan Plote, these wheel loaders will run cleaner and run better. Plus, the rest of each machine will be rebuilt to the point that these machines will be virtually new.” One study estimated that the stimulus funding aimed at diesel retrofits would likely generate approximately $6 of increased economic output for every $1 of federal funding. This economic impact is likely to be greatest in the auto parts manufacturing and heavy-duty truck manufacturing sectors, which have sustained job losses more than seven times the national rate. “The funding has been a huge success for Chicagoland and we hope we see more of it in the future,” Patten said. “We’re thrilled that we can keep our technicians working and at the same time they’re working on projects that have a positive effect on the environment, while also reducing the costs of our customers, which allows them to be more competitive in the marketplace.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The Victor L. Phillips Co. 4100 Gardner Ave. Kansas City, MO 64120 816/241-9290 816/241-1738

www.dynapac.com

Representatives from Plote Construction and Patten Industries pose in front of the Cat 980G.

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • May 1, 2010 • Page 33

Open House Offers Nortrax a Chance to Show Equipment NORTRAX from page 27

Tom Hink (L) of Cutting Edge Excavators asks David Koerkenmeier, district manager of Sakai America Inc., some questions about the Sakai SW330 roller.

Welcoming everyone to the two-day open house in Eau Claire, Wis., (L-R) are Brook Dahm; Tim Murphy, president and CEO; Dean Adsit, used equipment sales; and Yvette Rubenzer, corporate marketing manager, all of Nortrax. Stacey Curtis of Nortrax shows her parents, Shirley and Dick Butler, around the Nortrax facility with Eric Brosted, general manager of Nortrax Equipment.

Nortrax displayed the new John Deere PowerTech IT 4 engine. (L-R): Scott Sorley of Superior Diesel, Rhinelander, Wis.; Tim Murphy, vice president, midwest region, Nortrax; and Jim Schmirler of Superior Diesel.

AUTHORIZED OEM DEALER

Todd Brinkman, sales manager of B&D Fabricators LLC, Edgar, Wis., mans his company’s booth at the Nortrax open house.

Looking over this Sakai SW990 roller is Jeff Schdeider of Senn Blacktop Inc., Chippewa Falls, Wis.

Would you like

YOUR COMPANY featured in Construction Equipment Guide?

If so, please contact us: 470 Mar yland Drive, For t Washington, PA 19034

800/523-2200

Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Ta l b e r t Pr otec Waldon Perkins Hensley

YOUR PARTS SOURCE

Bucyr us Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components ...plus many others

V i s i t o u r w e b s i t e : w w w. h o w e l l t r a c t o r. c o m 811 Sivert Dr. Wood Dale, IL 60191 800-866-1778 Fax: 630-595-3855

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538

Page 34 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mid Country Machinery

3478 5th Ave. S. Fort Dodge, IA 50501 (515) 574-2302

4734 Sergeant Rd. Waterloo, IA 50701 (319) 234-8710

(800) 206-5936 www.midcountrymachinery.com

2006 Cat 950H Cab, A/C, Ride Control, 4 in 1 Bkt, only 675 Hrs ..............................................$175,000

2008 Cat 930H Cab, A/C, QC Bkt and Forks .............. ..................................................................$105,000

2006 Noram 65E Cab, A/C, Scarifier, only 38 Hrs ...... ....................................................................$65,000

2008 Cat D6T XL Cab, A/C, S/U blade, 2500 Hrs ...... ..................................................................$192,000

EXCAVATORS

CRAWLER TRACTORS

COMPACTORS

2007 Kobelco SK-350LC8 EROPS, A/C, Plumbed, 700 Hrs ..........P.O.R. 2006 Kobelco SK-290LC A/C, Very Good Condition, 2,700 Hrs .............. ..................................................................................................$105,000 2008 Kobelco SK-260LC8 60ft Long Reach............................FOR RENT 2007 Kobelco SK-260LC8 A/C, Plumbed, NEW..............................P.O.R. 2006 Kobelco SK-250LC 60ft. Long Reach, 2,000 Hrs ............$145,000 (4) 2008 Kobelco SK-210LC8 Cab, A/C, Aux Hyd, NEW .......................... ........................................................................................From $125,000 2006 Kobelco SK-210LC A/C, Hyd. Thumb, 2,500 Hrs ..............$85,000 2007 Kobelco SK-170 LC8 Cab, A/C, 600 Hrs ..........................$115,000 2007 Kobelco SK-160LC 42" Bucket, A/C, 500 Hrs ....................$87,000 2005 Kobelco SK-160LC A/C, QC, Hyd. Thumb, 1,600 Hrs ........$65,000 2001 Kobelco SK-160LC A/C, Manual Thumb, One Owner ........$43,000 2009 Kobelco ED195 Blade Runner, A/C, Plumbed, NEW ............P.O.R. 2008 Kobelco ED150 Blade Runner, A/C, 300 Hrs ..................$130,000 2007 Kobelco 135SR LC A/C, plumbed, wide pads, short radius, 600 Hrs ..............................................................................................$92,000 2009 Gradall XL4100, 6x4, A/C, NEW ......................................$350,000 2006 Cat 330DL A/C, QC, 1,600 Hrs ........................................$170,000 2007 Hyundai R290LC-7, A/C, Hyd. Thumb, Exc. Condition, 1025 Hrs .. ....................................................................................................$92,000

2006 Cat D8T EROPS, A/C, New Cat UC, 4 bbl Ripper, 3300 Hrs ............ ..................................................................................................$390,000 2006 Cat D8T EROPS, A/C, SU Blade, 3200 Hrs ......................$355,000 2005 Cat D8T EROPS, A/C, SU Blade, New U/C, 4000 Hrs ......$275,000 1985 Cat D7G, EROPS, S/U Blade, very good cond....................$55,000 1977 Cat D7G, EROPS, S/U Blade ..............................................$48,000 2008 Cat D6T XL, EROPS, A/C, S/U Blade, 2500 Hrs ..............$189,000 2003 Cat D6R XW, EROPS, A/C, 6-Way, Sweeps, New U/C ......$125,000 1998 Cat D6R XL, EROPS, A/C, S/U Blade, 4090 Hrs ..............$105,000 2007 Cat D6R XL III, EROPS, A/C, S/U Blade, Rear Ripper, 1700 Hrs .... ..................................................................................................$185,000 (2) 2004 Cat D6N LGP, EROPS, A/C, Str. Blade, One Owner.................... ............................................................................................$105,000 ea. 2007 Cat D6N LGP, EROPS, A/C, 6-Way, 3500 Hrs ..................$130,000 2006 Cat D6N XL, EROPS, A/C, LOW Hrs ................................$135,000 2007 Cat D6K XL, EROPS, A/C, 6-Way, 900 Hrs ......................$135,000 2006 Cat D5G LGP, EROPS, A/C, 6-Way, 1900 Hrs ....................$75,000 2001 Cat D5M XL, EROPS, A/C, 6-Way, Exc. Cond., 2420 Hrs ..$65,000 2004 Cat D5N LGP, EROPS, A/C, 6-Way Blade, 4500 Hrs ..........$55,000 (2) 2003 Cat 973C EROPS, A/C, GP Bucket ..........................$95,000 ea. 2006 Cat 963C EROPS, A/C, GP Bucket, 2,900 Hrs ..................$155,000 2004 Cat 963C EROPS, A/C, GP Bucket, 4,200 Hrs ..................$127,000 2002 Cat 963C EROPS, A/C, GP Bucket, 8,400 Hrs ....................$79,000 1995 Cat 963B EROPS, GP Bucket, good cond, 7,296 Hrs ........$45,000 2005 JD 750J LGP EROPS, A/C, 6-Way Blade, 2600 Hrs ........$107,000 2005 JD 700J XLT, EROPS, A/C, 6-Way Blade, 3100 Hrs ..........$75,000 2005 JD 700H LGP EROPS, A/C, 6-Way Blade, 3800 Hrs ..........$75,000 2004 JD 450H LT OROPS, 6-Way Blade, 1300 Hrs ....................$35,000

2004 Cat 815F EROPS, A/C, 4132 Hrs......................................$172,000 2006 Cat CP433 E 66" Padfoot w/Blade, 603 Hrs ......................$47,500 2007 IR SD122F 84" Padfoot w/Blade, 177 Hrs ..........................$85,000 2003 IR SD100F 84" Padfoot, 609 Hrs........................................$59,000 2005 IR SD100D-TF 84" Smooth Drum, 500 Hrs........................$69,500 2006 IR SD77DX 66" Smooth Drum, 500 Hrs ............................$50,000 2003 IR SD77F 66" Padfoot w/Blade, 2961 Hrs ..........................$32,000 2004 IR SD70D, 66” Smooth Drum, 830 Hrs ............................$49,500 2005 IR SD70D OROPS, 66" Smooth Drum, 787 Hrs ................$42,000 1999 IR SD70F OROPS, 66" Padfoot, 2,500 Hrs ........................$35,000 Ingersoll Rand DD12 32" Double Drum Roller, 321 Hrs ............$13,000 2004 Bomag BW177AD 66" Smooth Drum w/shell kit, OROPS, 1500 Hrs ..............................................................................................$39,000

LOADER/BACKHOES 2008 NH B95, A/C, Aux Hyd, Pilot Controls, RC, 500 Hrs ..........$65,000 2007 NH B95B, EROPS, A/C, 4WD, E-Hoe, 4-in-1 Bkt, 590 Hrs $59,000 2005 NH LB75B, EROPS, 4WD, Std Hoe, Aux. Hyd, QC, 700 Hrs............ ....................................................................................................$42,000 2005 JD 310G EROPS, 4WD, E-Hoe ..........................................$38,500 2004 JD 310G EROPS, 4WD, Standard Hoe ..............................$34,000 2000 Cat 416C EROPS, 4WD, E-Hoe, 2061 Hrs..........................$32,000 FULL LINE OF NEW HOLLAND LOADER BACKHOES AVAILABLE

MINI/MIDI EXCAVATORS 2008 Kobelco 80 CS EROPS, A/C, New, 239 Hrs........................$70,000 2008 Kobelco SK 70 SR Steel or Rubber, EROPS, A/C, 300 Hrs ............ ....................................................................................................$65,000 2007 Kobelco 50SR-3 EROPS, A/C, Aux Hyd, Rubber Tracks, 600 Hrs .. ....................................................................................................$38,000 2007 Kobelco 35SR3 (1) OROPS, (1) EROPS, NEW......................P.O.R. 2008 Kobelco 17SR OROPS, Expandable Tracks, NEW ................P.O.R. 2007 Kobelco 13SR OROPS, Exc. Cond., 180 Hrs......................$17,000 2003 Bobcat 325D OROPS, Rubber Tracks, 1900 Hrs ..............$12,000 (2) 2007 Hyundai R55-7, EROPS, A/C, Exc. Condition, 600 Hrs ............ ..............................................................................................$39,500 ea. 2007 Hyundai R28-7, EROPS, A/C, 136 Hrs ..............................$22,000 2007 Cat 305C CR, EROPS, A/C, 670 Hrs ..................................$45,000

WHEEL LOADERS 2006 Cat 950H, EROPS, A/C, RC, 4 in 1 Bkt, 675 Hrs ..............$175,000 2006 Cat 950H, EROPS, A/C, RC, 2896 Hrs..............................$155,000 2007 Cat 938G II, EROPS, A/C, High Lift ....................................$95,000 2006 Cat 938G EROPS, A/C, RC, 1,000 Hrs................................$99,000 2008 Cat 930H EROPS, A/C, QC, Exc. Cond. ............................$105,000 2004 Cat 928GZ, EROPS, A/C, 4900 Hrs ....................................$65,000 2004 Cat 924G, EROPS, A/C, QC, Bkt, 4700 Hrs ........................$59,000 2001 Cat 902 EROPS, QC, 2,200 Hrs..........................................$37,500 1989 Cat IT28B EROPS, QC, GP Bkt ..........................................$25,000 2001 Volvo L220E EROPS, A/C, 7yd Bkt, Radio, RC, 12,971 Hrs ............ ..................................................................................................$115,000 2007 NH W190 EROPS, A/C, 4.25 yd GP Bkt, 900 Hrs ............$145,000 2006 JD 644J, EROPS, A/C, RC ..................................................$82,000 2008 Hyundai HL780-7A, EROPS, A/C, RC, Like New, 430 Hrs .............. ..................................................................................................$160,000 2005 Hyundai HL740-7, EROPS, A/C, 2,100 Hrs ........................$55,000 1975 Case W20, EROPS, GP Bkt ................................................$12,000 2007 Kawasaki 65ZV, EROPS, A/C, RC, 920 Hrs ........................$82,000 2006 Komatsu WA200-5, EROPS, A/C, Excellent Cond., 1700 Hrs.......... ....................................................................................................$85,000 1999 Komatsu WA180-3L, EROPS, A/C, GP Bkt ........................$55,000

FORKLIFTS (8) 06-09 SkyTrak 10054, EROPS, 10,000#, 54Ft. Tilt Carriage .............. ......................................................................................Start at $59,000 (10) 06-09 SkyTrak 8042, EROPS, 8000#, 42Ft, Tilt Carriage ................ ......................................................................................Start at $45,000 (6) 05-09 SkyTrak 6042, EROPS/OROPS, 6000#, 42Ft, Tilt Car .............. ......................................................................................Start at $31,000 2007 SkyTrak 6036, EROPS w/Heat, 6000#, 36Ft, Tilt Car, 700 Hrs ...... ....................................................................................................$52,000 2005 SkyTrak 6036, OROPS, 6000#, 36Ft, 1900 Hrs ................$31,000 2004 SkyTrak 6036, OROPS, 6000#, 36Ft, 2500 Hrs ................$34,000 2008 JLG G12-55A, OROPS, 12,000#, 55Ft, 143 Hrs....................P.O.R. 2007 JLG G9-43A, EROPS, Sidetilt, 9000Lb, 43Ft, 1000 Hrs ....$61,000 2004 JLG G9-43A, OROPS, 9000#, 43Ft, 1500 Hrs ..................$44,000 2007 JLG G6-42A, EROPS, Sidetilt, 6600Lb, 42Ft, 1000 Hrs ....$42,000 2007 JLG G5-19A, EROPS, 5000Lb, 19Ft, 1300 Hrs..................$40,000 2006 Gehl RS5, 6000#, 35Ft, 400 Hrs ......................................$35,000 2005 Gehl RS6, 6000Lb, 36Ft, 1100 Hrs ..................................$38,000 2005 Mustang 634, 6000Lb, 34Ft, 541 Hrs................................$38,000 1998 Carelift 6044, 6000Lb, 44Ft, 3315 Hrs..............................$19,000 2007 Lull 1044C-54, OROPS, 10,000#, 54Ft, 1100 Hrs ............$72,000 1999 Lull 1044C-54, OROPS, 10,000#, 54Ft, 900 Hrs ..............$32,000 2006 Lull 644E, OROPS, 6000#, 42Ft, 1100 Hrs ......................$42,500 FULL LINE OF NEW SKY TRAK & JLG FORKLIFTS AND MANLIFTS

GRADER/SCRAPERS/TRUCKS 2004 Cat 140H EROPS, A/C, Push Block, Rear Rip. ................$145,000 2006 Cat 613C II EROPS, A/C, Exc. Condition, 1,500 Hrs ........$150,000 Cat 619 Scraper ............................................................................$9,500 (2) Cat 631B Hydraulic Pull Scraper ....................................$30,000 ea. 2006 JD 672D, A/C, Scarifier, Exc. Condition, 2700 Hrs ..........$130,000 Terex TS-14B EROPS, A/C ..........................................................$25,000 2006 E-Ject E-22, 22Yd. Hyd. Pull Scraper ................................$75,000 (2) 2005 Cat 725, Matched Pair, Excellent Condition, 2500 Hrs .............. ............................................................................................$225,000 Ea. 2002 Cat 725, Articulated Dump Truck, 23.5x25 Tires, 5500 Hrs .......... ..................................................................................................$152,000 2006 Noram 65E EROPS, A/C, New ............................................$69,000 2006 Noram 65E OROPS, New ..................................................$59,000 *OTHER MISCELLANEOUS EQUIPMENT, PARTS AND ATTACHMENTS NOT LISTED CALL IF YOU DON'T SEE SOMETHING YOU'RE LOOKING FOR

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 35

249 W. Lake Street • Elmhurst, Illinois 60126

(888) 832-9830 Fax: (630) 832-6735

www.hartstractor.com

Sales, Rentals, Shop & Field Service, Portable Align Boring & Bore Welding Only 3885 original hours

Where Service Comes First! Crawler Loaders

1974 Caterpillar 977L S/N 11K06703, OROPS, GP Bucket W/Teeth............. ................................................................................................................$25,000 1971 Caterpillar 977L S/N 11K03983, OROPS, GP Bucket W/Teeth............. ................................................................................................................$24,000 2003 Caterpillar 963C S/N 2DS02393, EROPS, Air, GP Bucket W/Teeth..... ..............................................................................................................$145,000 2001 Caterpillar 963C S/N 2DS02101, EROPS, A/C, GP Bucket W/Teeth, 90% U/C ................................................................................................$95,000 2000 Caterpillar 963C S/N 2DS01069, EROPS, Air, GP Bucket W/Teeth, Good U/C..............................................................................................$105,000 1996 Caterpillar 963B S/N 9BL01328, EROPS, No Air, GP Bucket W/Teeth ..................................................................................................$79,500 1999 Caterpillar 953C S/N 2ZN02364, OROPS, GP Bucket W/Teeth, 1600 Org. Hrs ..................................................................................................$92,500 1996 Caterpillar 953C LGP S/N 2ZN00437, OROPS, 4+1 Bucket W/Teeth . ................................................................................................................$64,000 1988 Caterpillar 953 S/N 20Z2083, OROPS, GP Bucket W/Teeth, New Engine ....................................................................................................$42,000 1985 Caterpillar 953 S/N 20Z0530, OROPS, New U/C, GP Bucket W/Teeth, C/P ..........................................................................................$37,500

2003 Cat 963C, S/N 2DS02393, EROPS, Air, GP Bucket W/Teeth..............$145,000

Grinders

Bitelli SF102 Grinder S/N 95990017 ................................................$135,000 Bitelli SF60 Grinder S/N 01025, No Conveyor ..................................$44,000 Bitelli SF60 Grinder S/N 980199 ........................................................$52,000 Remax 4800 Grinder S/N 9948312601, 48" Cat 260HP Pull Type 12" Depth ......................................................................................................$49,000

Compactors

1986 Caterpillar 815B Conv S/N 15Z00374, EROPS Cab, Excellent, 7300 Hrs ........................................................................................................$100,000 1978 Caterpillar 815 S/N 91P1326, Cab, ST Blade, No A/C ............$79,500 1978 Dynapac CC42A DD Roller S/N 547D25, 66" Double Drum, Cat 3208 Diesel, Water System ..................................................................$16,000

Only 1800 original hours

Wheel Loaders

1999 Cat 953C, S/N 2ZN02364, EROPS, GP Bucket w/ Teeth, 1800 Hrs ....$92,500 Low hours

1972 Case W-14 S/N 9110608, EROPS Cab, New Transmission, New Tires, C/P ................................................................................................$16,000 1999 Caterpillar IT38G S/N 7BS00652, EROPS, A/C, 20.5x25 Tires, 2249 – ECM shows 9139, 3.5 Yd Bkt W/ Boe ............................................$75,000 1992 Caterpillar IT28B S/N 1HF02365, EROPS, 17.5x25 Tires, @ 95% Matched, 2.5 Yd Bkt, 8214 Hrs ............................................................$39,000 1968 Caterpillar 966C S/N 76J110, Cab, Heat, Lights, New Engine, Needs Pin Work, Tires Fair ..............................................................................$21,000 1990 Caterpillar 936E S/N 33Z04157, EROPS, New Trans, GP Bucket W/BOE, C/P ..........................................................................................$54,000 1987 Caterpillar 936 S/N 33Z2474, EROPS, New 20.5x25 Radials, GP Bucket W/BOE ......................................................................................$44,000 1986 Caterpillar 936 S/N 33Z1950, EROPS, New 20.5x25 Radials, GP Bucket W/BOE ......................................................................................$44,000 1975 Clark 55B S/N 416C-793-CAC, EROPS, GP Bucket, New Engine ..... ................................................................................................................$16,000

Crawler Tractors

1997 Caterpillar D-8R S/N 7XM01828, OROPS, SU Blade, New U/C, New Engine, C/P, 9200 Hrs ................................................................$199,000 1994 Caterpillar D-5C S/N 9DL00406, 6605 Hrs, New Trans..........$39,500 1980 Caterpillar D-5B LGP S/N 46X0504, New Engine, C/P ..........$32,500 Caterpillar D-4C S/N 1RJ1417, OROPS ............................................$29,000

Combo Loaders

2002 Caterpillar 430D IT S/N BML02305, 4x4, EHOE, Q CPLRS, A/C, Plumbed, New Tires ..............................................................................$49,500 1988 John Deere 510C S/N 746646, EROPS, Cab, 4x4 ....................$17,000

Motor Graders

1985 John Deere 670A S/N 509900, Cab, Frt Scarifier, 12' MB, 5200 Org Hours ......................................................................................................$26,500

Hydraulic Excavators

1998 Caterpillar 315BL S/N 3AW00489, Plumbed Mech Thumb + Bucket . ................................................................................................................$69,500 1999 Caterpillar 301.5 S/N 3YW00647, ROPS, Dozer, Rubber Tracks, Plumbed ..................................................................................................$14,000 1993 Caterpillar E120B S/N JF1206, 9312 Hrs ..................................$21,000 1995 Gradall XL 4100 S/N 411264, 360° Boom Bucket, Cummins Power Up+Down, A/C ......................................................................................$70,000 1976 Gradall 660C S/N NP24078, Detroit Up + Down, One Bucket $8,500 1996 Komatsu PC-200 LC-6, S/N A82010 Plumbed QC 48" Bucket, C+P ... ................................................................................................................$47,000 1979 Linkbelt LS-3400 S/N 49H4639 ................................................$28,000

Bitelli SF102 Grinder, S/N 95990017 ...... ..................................................$135,000

Skid Steers

1997 Bobcat 863 S/N 514415821, 75HP, Turbo Diesel, 66" GP Bucket, C/P ................................................................................................................$13,500 1997 Case 90XT S/N JAF0245761, Cab, Heat, Lights, 33x15.5x16.5 Tires @ 90% ....................................................................................................$15,000

Member of:

Off Road Trucks

New engine

1996 Volvo A-25C S/N 5350V50826, 30% Bridgestones, 4200 Org. Hours . ................................................................................................................$79,500

Trucks

1998 Cronkhite Tag Trailer......................................................................$3,000

Scrapers

Caterpillar 615 S/N 46Z1391, OROPS ................................................$35,000 Caterpillar 615 S/N 46Z1266, OROPS ................................................$35,000 1973 Caterpillar 613 Scraper S/N 71M2400, OROPS, 23.5x25........$15,000 1974 Terex TS-14 B Scraper S/N 17U0T58092, OROPS. 471 Detroit, 29.5 X 25, Unit 401........................................................................................$35,000 1976 Terex TS-14B Scraper S/N 17U0T59817, OROPS, 471, Detroit, 29.5x25, Unit 402 ..................................................................................$35,000 1976 Terex TS-14B Scraper S/N 17U0T59847, OROPS, 471, Detroit, 29.5x25, Unit 403 ..................................................................................$37,000 1976 Terex TS-14B Scraper S/N 17U0T61098, OROPS, 471, Detroit, 29.5x25, Unit 404 ..................................................................................$35,000 1976 Terex TS-14B Scraper S/N 17U0T61111, OROPS, 471 Detroit, 29.5 X 25, Painted, Unit 405 ........................................................................$37,000 1976 Terex TS-14B Scraper S/N 17U0T61483, OROPS, 471 Detroit, 29.5 X 25, Unit 406........................................................................................$37,000 1976 Terex TS-14B Scraper S/N 17U0T62163, OROPS, 471 Detroit, 29.5 X 25, Unit 407........................................................................................$35,000 1977 Terex TS-14B Scraper S/N 17U0T62951, OROPS, 471 Detroit, 29.5 X 25, Unit 408........................................................................................$45,000 1977 Terex TS-14B Scraper S/N 17U0T63684, OROPS, 471 Detroit, 29.5 X 25, Unit 409........................................................................................$47,000 1977 Terex TS-14B Scraper S/N 17U0T64121, OROPS, 471 Detroit, 29.5 X 25, Unit 410........................................................................................$35,000 1978 Terex TS-14B Scraper S/N 17U0T64161, OROPS, 471 Detroit, 29.5 X 25, Unit 411 ........................................................................................$37,000 1978 Terex TS-14B Scraper S/N 17U0T19820, OROPS, 471 Detroit, 29.5 X 25, Unit 412........................................................................................$35,000 1978 Terex TS-14B Scraper S/N 17U0T2165, OROPS, 471 Detroit, 29.5 X 25, Unit 413 ............................................................................................$38,000 1978 Terex TS-14B Scraper S/N 17U0T65614, OROPS, 471 Detroit, 29.5 X 25, Unit 414........................................................................................$40,000 1979 Terex TS-14B Scraper S/N 17U0T65882, OROPS, 471 Detroit, 29.5 X 25, Unit 415........................................................................................$37,000 1979 Terex TS-14B Scraper S/N 17U0T67340, OROPS, 471 Detroit, 29.5 X 25, Unit 416........................................................................................$45,000 1980 Terex TS-14B Scraper S/N 17U0T68628, OROPS, 471 Detroit, 29.5 X 25, Unit 417........................................................................................$40,000 1981 Terex TS-14B Scraper S/N 17U0T69174, OROPS, 471 Detroit, 29.5 X 25, Unit 418........................................................................................$39,000 1986 Terex TS-14B Scraper S/N 17U0T1700, OROPS, 471 Detroit, 29.5 X 25, Unit 419 ............................................................................................$50,000 1986 Terex TS-14B Scraper S/N 17U0T72718, OROPS, 471 Detroit, 29.5 X 25, Unit 420........................................................................................$54,000 1986 Terex TS-14B Scraper S/N 17U0T72943, OROPS, 471 Detroit, 29.5 X 25, Unit 421........................................................................................$50,000 1986 Terex TS-14 B Scraper S/N 17U0T73053, OROPS. 471 Detroit, 29.5 X 25, Unit 422........................................................................................$50,000 1986 Terex TS-14 B Scraper S/N 17U0T73059, OROPS. 471 Detroit, 29.5 X 25, Unit 423........................................................................................$50,000 1986 Terex TS-14B Scraper S/N 17U0T73060, OROPS, 471, Detroit, 29.5x25, Unit 424 ..................................................................................$50,000 1987 Terex TS-14B Scraper S/N 521263, OROPS, 471, Detroit, 29.5x25, Pilot Controls, Unit 425 ........................................................................$54,000

1997 Cat D8R, S/N 7XM01828, 9200 orig. hrs., new rails, rollers & sprockets, 0 hrs on engine, new U/C ....................$199,000

1999 Cat IT38G, S/N 7BS00652, EROPS, A/C, 20.5x25 tires, 2249-ECM, shows 9139, 3.5 yd bkt w/BOE ................$75,000

Components

Caterpillar 615 Transmission ..................................................................$7,000 Detroit 4-71 Engines Exch Detroit 6V-71 Engine New Caterpillar 3306 Engine Caterpillar 963 Engine Caterpillar 966D Transmission Detroit 50 Series Engine Caterpillar 963 Transmission Perkins Diesel 4 Cyl 65 HP ........................................*NEW* (5) $4,750 Ea IH T444E Diesel 7.3 250 HP W/Radiator ..................*NEW* (4) $5,900 Ea New Duramax 6.6L Diesel 210HP ............................................(2) $7,000 Ea

MISC.

Amida Light Plant, New Gen. ................................................................$7,000 Bobcat Dozer Blade, Hyd New..............................................................$3,600 Bobcat Trencher, Used, Hi Flo................................................................$5,500 Coleman CJ4D40SQ 40K W Portable Generator Set, S/N 4982862, John Deere diesel, Super Quiet Pack....................................................$12,500 Crane Forks ..............................................................................2 @ $600 Each IR Electric Air Dryer S/N 96ADXRO142, 460 Volt 3 phase..............$2,000 TB425X BTI ............................................................................................$7,500 Kent Hyd. Brkr KHB8G11......................................................................$9,500 NPK Plate Compactor, 33"X24" Swivel................................................$5,500 Grove RT 58 Crane Caterpillar 963 Mitsubishi Caterpillar 966C

Parts Machines

One of 25 In Stock & Ready to work!!! All have had needed repairs, Ready for Dirt. $35,000-$50,000

Page 36 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ARRA Funds Help Build Bridge Near Tuscumbia, Mo. BRIDGE from page 1

District engineer, said. “That’s kind of unique.” The new bridge, which is being built right beside the old one, has three spans of steel plate girders spanning the main part of the river and approach spans on both sides of the river, Schwartze said. The approach spans have pre stressed concrete girders to support the bridge, he added. The bridge carries just over 3,000 vehicles each day, Keith Miller, project superintendent for APAC-Kansas Inc., the contractor on the $9 million project, said. The old two-lane truss bridge is very narrow—only 20 ft. wide. The new lanes will be 11 ft. wide with three-ft. wide shoulders. “It will handle the traffic much better as well as the farm equipment that does go across from time to time,” Miller said. “All bridges have some sort of complication to them,” he said. For him that complication came as wet weather and those fluctuating water levels in the river. The bridge is actually downstream from the Bagnell Dam, which is owned by Ameren UE (formerly Union Electric Company) and generates power for the Lake of the Ozarks area. The amount of water let out by the dam varies according to the utility company’s generation demands, Schwartze said. “When they are generating or not generating power, the river’s water level fluctuates up and down and that was a challenge for the contractor to get those river piers built in the water. Their barges kept going up and down on them as much as eight to 10 ft. a day. That was the biggest challenge they had and they fought that all last summer and into the winter.” Miller agreed. “When they let water out, I’ve got a crane on a barge and a tugboat out here in the middle of the river and if the river is moving real swift, it makes it real hard for me to get in and out of here because of what could go wrong,” he said noting that the new bridge is being placed upstream from the old bridge. “Because of the river currents, if we’re moving our crane into position, if we get trouble, we’re going be into the old bridge,” he said. “It’s a lot more complicated building a bridge upstream from an existing bridge than downstream. “The major challenge is the river fluctuation and the location of the thing but for the most part everything else is relatively simple. That’s been my biggest problem—the river fluctuation because of the rain and also the power generation coming from Bagnell Dam.” With limited staging area on terra firma, the contractor has a crane on a barge in the water and one on each side of the riverbank. While cranes on barges aren’t unusual in bridge construction, Miller and his team had to go the extra mile to get those barges there.

Access from the Missouri River to the Osage is inhibited to an old lock that’s not in service anymore, he said. That meant that the barges needed for the project couldn’t get to the site via the water. So Miller did what had to be done—he trucked in two barges in about 20 pieces, assembled them at the river for use on the project. For Miller it was all in a day’s work. “There was really no other way of getting our equipment in there other than trucking it in and setting it down with a crane,” he said. “We actually had a crane set up on the river bank and the crane will pick the pieces up off of the truck and set them down in the water. “We had to assemble the barge and then put our crane together and drive the crane out on it.” It was, he said, an unusual process “for this part of the country” adding, “Usually you have enough access. You can put a barge out in the Missouri River or use a barge that’s already in the water. Where this job is located, access is pretty limited so we had to actually truck our barges in and assemble them on the water. It’s like a big jigsaw puzzle.” One of the barges was for the crane, Miller said. The other was originally for the drill to cut the shafts in the middle of the river but instead he converted the drill shaft barge into a manlift barge “so I can do the girder work and do the column work and stuff like that,” he said. The equipment includes a Triple 7 Manitowoc crane on the water, a 300-ton M250 Manitowoc and a 338 Link-Belt that built the piers on the south side and also serviced the bridge deck on the south side, he said. The quality of rock crews encountered on the north side of the project caused them to drill the shafter deeper than originally planned. “The rock we encountered wasn’t sound rock,” Miller said. “It was good rock but it wasn’t good enough so we actually had to extend the drill shaft about four feet.” The 3-in. hole drill for the test core that was the base of the design of the bridge didn’t tell the entire story—not an unusual scenario, he said. “We put nine-foot (diameter) drill shafts in so we’re cutting a nine-foot hole. Sometimes we’ll encounter some rock that isn’t as good as they thought originally and that’s what happened on the north drill shafts.” Precipitation presented it own challenges. “We had a lot of rain last summer,” Miller said. “Even over the fall we had a lot of rain and then we had a lot of snow this winter. It’s been beating us up pretty good.” The rock below the river’s surface also provided a surprise for the construction team.

“They hit some extraordinarily hard rock in the bottom of this river that they were really not expecting,” Schwartze said. “The hardness of the rock was more of a challenge than they expected.” In fact, the team had to “modify their plan for construction on how they did their drilled shafts,” he said. “They had to have longer casings to try to get up above that fluctuation in the river.” APEC bought a new concrete finish machine to use on the bridge because the bridge is actually going up on a five percent grade, Schwartze said. “When you’re placing concrete on a new bridge deck going up on a grade, that does present construction challenges for the contractor.” The river is bordered by a rock bluff on one side and a floodplain on the other, Schwartze said “That’s all river bottom (on the floodplain side) so one of the things that was done was the rock on the side that had the rock bluff was hauled across the bridge and used to create fill for the opposite side,” he said. “There was a lot of truck traffic back and forth every day on the old bridge—and the old bridge is in very poor condition.” In fact, the bridge is in such bad condition that Pete Rahn, Missouri Department of Transportation Director, said on an American Association of State Highway and Transportation Officials Web site that is a “one-year report on state transportation successes under the American Recovery and Reinvestment Act” that the bridge is in “serious condition.” The current structure is “shored up with a temporary steel structure bracing one of the supporting bridge columns,” the report said. “ It is common to see huge chunks of concrete fall below as cars pass over the bridge, which is closed now to heavy truck traffic.” “The contractor has made great progress since he started,” Schwartz said. Both he and Miller anticipate an on-time completion later this year. “We should be on schedule,” Miller said. “There shouldn’t be a reason we won’t make schedule at this time although I’ve lost a lot of time in the river because of the wet weather we had after the job started. We’ve set all the steel in the last unit. Hopefully, we’ll make a deck pour on this last unit in three weeks.” As the first stimulus project to get under way after the president signed the legislation on Feb. 17, 2009, the bridge gathered international attention as the first shovelful of earth were moved. “I’ve been on Japanese TV, and French radio,” Miller said. That’s on top of the Good Morning, America, CNN, Fox and other national coverage the project has garnered. “It was more than what I really cared for,” Miller said. “It was more than what I bargained for. I told my company I build bridges for a living. I was not cut out for

this.” Things “calmed down quite a bit” after the initial story broke, Miller said. But there was an uptick in media interest when the project crossed the one-year anniversary of the stimulus bill signing last month. “I hope it stays that way,” he said hopefully. But then he adds ruefully: “But when they open this thing up, it’s going to come back up again.” Still in all, Miller is happy with the project. “The project has been a very good project,” he said. “It’s something that’s very much needed by the folks in the area because this is a commuter route that people use. It’s 28 mi. to the nearest bridge up and down stream so the detour around this is quite a distance. It does serve a fairly large area and is certainly important for that reason.” And what about the main reason for the stimulus package—jobs? Miller says some 240 people have jobs because of the project. “That includes support workers like those that are making concrete, girders and fabricated the steel,” he said. Miller’s heard rumors in the area that the bridge wouldn’t have been built without the stimulus money. “No, they were going to build the bridge but the government gave them an accelerated program,” he said. But plans were already under way for the new bridge although the funding was not all in place when the stimulus funds came along, Miller said. “They’ll design a bridge from 5, 6, sometimes 10 years out from when it’s going to be built. “This bridge was already in the works and was already through the design process. The whole process a project has to go through before it’s actually let—this one was the closest to that process.” Miller also hears the criticism about the bridge itself. “I keep hearing people say, “Ah, it’s a bridge to nowhere.’ Well, it may be but it’s going to one of our military bases that’s taking care of this country,” he said. “This is a major link to Fort Leonard Wood. I don’t know if people realize that or not but all of Fort Leonard Wood’s materials —or most of it—and trucks go through this route. I see pump trucks going across this bridge once or twice a week because of the work that’s going on at Fort Leonard Wood and this is a main thorough way to get there.” Miller says he doesn’t like to get caught up in talk about why and how the bridge was selected for stimulus funding. “It’s none of my business,” he said. “My job is to build the thing. The company gets the job. It’s my job to build it.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Crushing, Screening & Recycling Section FAE USAHosts Customer Appreciation and Demo Day at Its Ga. Headquarters

ustomers, distributors and a group of international visitors turned out for FAE USA’s customer appreciation and demo day at its North American headquarters in Flowery Branch, Ga. Representatives of the Italian Trade Commission and the Greater Hall County (Ga.) Chamber of Commerce were in attendance to show their support for the event. A full day of activities kicked off with breakfast and a presentation of the vast array of FAE and PrimeTech machines. Then, attendees were transported to a nearby Gainesville, Ga., demo site, to see the machines and attachments at work. Despite heavy rain, the outdoor demonstration was a huge success. A few FAE USA customers brought their own machines to demonstrate. Alex and Cathy Cornelius of Cornelius Farms had their John Deere 8530 equipped with an FAE SSH 225 soil stabilizer delivered to the site. Alex said they’ve found that their machine and attachment combo serves them well in their agricultural and grinding business and are able to grind up to 20 in. deep with their attachment. Kevin Knolls of 3K Excavating in Alabama trucked in his Kobelco SK 160LC with an FAE UML 125 forestry mulcher. Knolls said the machine is working great for him in his land clearing business. He said the mulcher saves him time and money in pre-clearing land and has been completely trouble free. After purchasing the mulcher, the only minor machine modification that was required was adding a con-

Checking out FAE USA’s offerings for the first time are (L-R) Don Speaight, Linndale Equipment, Wilmington, Ohio; Tom Ashton, SWACO Solid Waste Authority of Central Ohio, Columbus, Ohio; Miriam Speaight, Linndale Equipment; David Miller, Weaver Boos Consultants, Columbus, Ohio; and Phillip Beal, Weaver Boos Consultants, Grand Rapids, Mich.

Bringing their machine to the event to show off the capabilities of the FAE SSH 225 soil stabilizer mounted and PTO driven by a John Deere 8530 are (L-R) Hosea Medina, Alex and Cathy Cornelius and Juan Herrea, Cornelius Farms, Manor, Ga. Turning out to show their support for the event and enjoying a cup of coffee with Giorgio Carera (C) CEO of FAE USA are Alex Musa (L), assistant trade commissioner, and Fabrizio Giustarini, trade commissioner, both of the Italian Trade Commission, Atlanta.

Kevin Knolls, 3K Excavating in Alabama shows the attendees that his Kobelco SK 160LC equipped with an FAE UML 125 forestry mulcher does an incredible job of mulching trees from the top down.

FAE USA’s Blake Eavenson (C) talks with Shawn Wilson (L), Wilson Clearing & Mulching, Wade, N.C., and Donovan McLaurin, McLaurin Company, Wade N.C., about the all-new MTH 225 stabilizer.

verter valve and his machine and attachment were up and running perfectly. After the demo it was back to FAE USA Inc. for a barbeque lunch and an opportunity to tour the FAE USA headquarters to see the attachment and parts stocking facility that serves the U.S. market, as well as service offerings. To show its appreciation for those in attendance, FAE USA provided special pricing deals on teeth and attachments.

Several new products were introduced including the PrimeTech PT 400 with 300/S sub soiler and a full line of mini-excavator mulchers. The all-new MTH 225 stabilizer for road construction drew a lot of attention from both dealers and end users. The first unit to hit the states was delivered to FAE USA just two days before the event took place. see FAE page 38

Page 38 • May 1, 2010 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Customers, Dealers Visit FAE USA Headquarters in Ga. FAE from page 37

Waterproof boots and an occasional break under the big tent were a must as the demo was marred by periodic torrential downpours. However, the weather never dampened the spirits of the attendees. The Vermeer BC1200XL brush chipper features a dual-horizontal offset feed roller design that aggressively grabs and feeds material up to 12 in. (30.5 cm) into the chipper drum.

Vermeer BC1200XL Designed for Durability, Performance Power and innovation are at the heart of the new BC1200XL brush chipper from Vermeer. Available with either an 85-hp (63.4 kW) or 110-hp (82.0 kW) Cummins Tier III diesel engine, the BC1200XL easily processes material up to 12 in. (30.5 cm) in Operating a Deutz-Fahr Agrotron 265 tractor with a STCH 225 rock crusher, is FAE diameter. The BC1200XL features dual-horizontal USA’s Dave Holze. Taking photos for his customers and prospects in the Northeast is Dave Heath, FAE USA’s newest district representative based in Shermans Dale, offset feed rollers that improve chipping perPa. formance by aggressively grabbing and feeding material to the chipper drum. The offset feature helps the upper feed roller climb over logs and branchy material while a dual-pump hydraulic system delivers a theoretical 3,600 lb. (1,632.9 kg) of pull-in force for heavy work. A hydraulic down-pressure feature on the upper feed roller allows the BC1200XL to crush material, improving the feed roller “bite” into logs and branches. By using a manual control valve, the operator can adjust the amount of down-pressure as needed. Premature wear to the belt drive system is reduced by a clutchless PTO system that prevents high-idle engagement of the cutter drum. The belt drive, integrated with the throttle, can be engaged only while the Operating a PrimeTech PT400, Duane McGann, Forestry Solutions, Toccoa, Ga., gave engine is at a low rpm. Once engaged the the crowd a show as he used the machine’s considerable power to take down and engine automatically throttles up to full rpm. mulch some large timber. The Vermeer SmartFeed system monitors

engine rpm and automatically stops or reverses the rollers when feeding larger hardwood material. Plus, it senses feed roller jams and responds by automatically shifting material back and forth, reducing the need to manually manipulate the control bar. The bottom feed stop bar is strategically located to make it possible for the operator to strike the bar and shut off the feed, either intentionally or automatically, in an emergency situation. A reset button on each side of the infeed housing allows for easy system reset if the bar is tripped. A removable choker chain can be detached from the winch line and carried out to the log, allowing the operator to easily attach the choker chain to a log compared to hook-on cable designs. The BC1200XL also features a winch interlock hook that stores the winch line out of the normal material flow and protects it from being snagged and pulled into the chipper during normal operation. It also prevents simultaneous pulling out of the winch line while the feed rollers are operating, reducing the likelihood of the line being snagged and pulled into the chipper. For more information, visit www.vermeer.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 1, 2010 • Page 39

SALES

SERVICE

RENTALS and PARTS

The best equipment is very important when you are ready to crush and screen concrete and asphalt. Powerscreen has a proven record making spec materials for our customers. Please call us with all your crushing, screening and recycling needs.

EFFICIENCY + RELIABILITY = PROFIT CALL ON THE EXPERTS. CONTACT YOUR LOCAL POWERSCREEN PEGSON DEALER TODAY Serving

Serving

INDIANA

MICHIGAN

MINNESOTA

OHIO

Powerscreen of Indiana, Inc. 255 N. Hetzler Court Angola, IN 46703

Powerscreen of Michigan 7819 West Jefferson Detroit, MI 48209

Theco, Inc. 5470 Quam Ave. NE St. Michael, MN 55376

AGGCORP P.O. Box 219 Westerville, OH 43086

(800) 843-4277

(313) 841-8370

(800) 776-0335

(614) 309-6854

www.powerscreenindiana.com

www.powerscreenofmichigan.com

www.thecoinc.com

www.aggcorp.net

Page 40 • May 1, 2010 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Is the Screening a Perfect Fit for the Application? In many applications, the screening process is the key ingredient in transforming a waste material product into a highly sought after marketable material. Several styles of portable screening plants are available, including shaker screens, trommel screens, severe shake shaker screens, starscreens and box screens. “Screening is simply the segregation of material by size,” said Rick Cohen, president of Screen USA Inc. located in Smyrna, Ga. “Although all screening plants are designed for the purpose of segregating material, different screening applications demand different screening technologies. Shaker Screens “Traditional shaker screens have been around for many years and are commonly used in screening aggregates and topsoil,” said Cohen. “The key to any screening plant is to have a nice consistent feed rate, and the shaker screens are no exception to this rule. Consistent feed rates allow the material to be evenly spread across the shaker screen to achieve the highest efficiency in screening. Many sand and gravel screening customers add spray bars to rinse the gravel during the screening operation. However, it’s important to understand that the addition of spray bars will rinse the rock, but not clean the sand. For optimal results, a fine material washer [sand screw] should be used in conjunction with the portable shaker screen to yield a quality washed sand product. “To manufacture a sand product to meet a certain specification, many may require the assistance of a classifier, which will segregate different sizes of sand and blend them back together. Before purchasing any equipment, my recommendation is to take a few samples and send them out for a full sieve analysis. The results of the sieve analysis will dictate what additional screening accessories will be needed,” Cohen added. Shaker screens also are widely used for screening topsoil. In clumpy soils, many manufacturers equip their screening plants with high-speed shredders, which break up the clumps before screening. This shredder is desirable when screening clay-based soils, but is not needed in sandy, loam topsoil, according to Cohen.

Heavy-duty severe shake shaker screens are equipped with a stout feeder, which utilizes a feeder belt with impact beds or a steel apron feeder.

A box screen is a shaker screen mounted on a portable chassis. Trommel screens normally have a large screening area and incorporate a cleaning brush that assists in the screening of higher moisture material.

Trommel Screens Trommel screens vary greatly from the shaker screens and utilize a spinning drum to screen material. “Although both trommel screens and shaker screens do an excellent job of processing topsoil, trommel screens have a distinct advantage when screening topsoil contaminated with a great deal of organic debris. Trommel screens normally have a considerably larger screening area and incorporate a cleaning brush that assists in the screening of higher moisture material. Trommel screens are also very popular in screening organic materials, such as ground wood, mulch and Shaker screens are widely used for screening topsoil.

compost. As one might expect, these applications require a fine screen size such as 3/8 inch and this complicates the screening process. The small screen opening equates to needing more screen area for efficient screening,” Cohen said. Starscreeners In high moisture materials with moisture levels of 35 to 45 percent, Cohen advocated the use of a starscreener. “Starscreeners have been around for years screening peat and potatoes. At the present time, based on our customers’ demand, a newer version has been designed to screen high moisture organics such as compost. Over the past 20 years, the particle size of compost has changed from 1 inch to the current desired size of approximately 3/8 inch. High moistures and the smaller required sizes created a problem for some of the older models. Newer starscreens were reengineered to incorporate a unique continuous cleaning system, which has definitely changed the way the industry see SCREENING page 42

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 1, 2010 • Page 41

What’s going on in YOUR COMPANY

We want to know! Give us a call.

Construction Equipment Guide

(800) 523-2200 OR

FAX:

(215) 885-2910

Page 42 • May 1, 2010 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

IROCK Crushers Office Relocates to Accommodate Growth IROCK Crushers has moved its corporate office to a larger location in Oakwood Village, Ohio. General Manager, Robert Nelson explained that the move is a small part and first step toward its growth business strategy. The new location provides more office space with room for growth while locating IROCK Crushers between Akron and Cleveland, two major markets in northern Ohio. The new sales office is located alongside Ohio CAT, one of IROCK Crushers’ dealers. According to Nelson, the proximity will help facilitate business in the markets covered by Ohio CAT. IROCK’s manufacturing and parts operations will continue to be based at its Valley View, Ohio facility. IROCK formed in 1992 in an alliance partnering Ohio CAT and manufacturer Indy Equipment. The company is known in the crushing and recycling industry for providing heavy-duty design features in a highly portable system equipment line of wheel-mounted, portable crushing plants and related products

including IROCK’s: • RDS-15 primary crusher for processing quarry rock, demolition debris and recyclable materials up to 350 tph. • RDS-20 primary closed circuit crushing plant, for production processing of quarry rock, demolition debris and recyclable materials up to 500 tph. • RDS-20H primary closed circuit crushing plant with a 3-deck horizontal screen to produce four finished products for processing quarry rock, demolition debris and recyclable materials up to 500 tph, and the similar RDS-30H crushing plant that processes materials up to 650 tph. • Sidewinder is a secondary screening and crushing plant used to separate materials at a required size and crush the over-sized material. It produces products in three sizes and returns over-sized materials to be re-screened. • IROCK Magnum is a mobile primary crusher with a large feed opening, capable of processing quarry rock, demolition debris and recyclable materials at rates of 150 to 650 tph. For more information visit www.irockcrushers.com.

(L-R): The IROCK team gathers at the new location, Sean Donaghy, sales manager; Nancy Frognowski, office manager and Robert Nelson, general manager.

Secrets in Matching Screening Plants to Specific Applications SCREENING from page 40

views starscreeners,” Cohen said. Cohen does not recommend starscreeners for material that is contaminated with twine, banding wire or any other string like material. Box Screens One of the more simplistic screening products is the box screen, which is simply a shaker screen mounted on a portable chassis. Instead of having a feeder, a loader or excavator must “bucket sprinkle” material onto to shaker screen. The screened material either falls through the screen onto the ground or onto a built-on conveyor, with the oversized material falling directly off the end of the screening plant. “These machines are excellent for coarser sizing, but are rated as fair to poor on precision screening. Since the loader or excavator bucket is being used as the feeder, it is difficult to provide a consistent feed. As a result, the machine is either overfed or is processing nothing at all. Over the past 10 years, many box screens have been introduced into the screening market. Most are extremely light duty, are marketed based on selling price, and work well for light duty screening work. However, for heavier applications, these

light duty screening products will not hold up,” Cohen said. In these cases he recommended choosing a heavy-duty box screen. For still other applications, the industry has developed an alternative called heavy-duty severe shake shaker screens. Severe Shake Shaker Screens As the name implies, heavy-duty severe shake shaker screens are used in heavy-duty applications such as construction and demolition. Instead of just having a shaker screen, the machines are equipped with a stout feeder, which utilizes a feeder belt with impact beds or a steel apron feeder. This allows the material to be fed at a consistent feed rate to achieve the highest level of production possible. Slabs of concrete, asphalt, quarry stone, etc. can be fed into these robust screening plants and they will typically screen into three fractions. Many of these machines are track mounted allowing for complete mobility. “Severe shake shaker screens are extremely efficient for log yard clean-up, screening root material and other tough applications. Many customers who own crushers purchase these screening plants as they can either screen crushed material into

Starscreeners are often used in high moisture materials.

three sizes or use the same machine to scalp off the heavier materials to minimize unnecessary crushing,” Cohen said. “In the most simplistic terms, once the specific screening technology is determined, we must look at the size of the loader bucket to select the proper sized screening plant to suit the customer’s product need,” added Cohen.

Screen USA Inc. specializes in manufacturing small to medium sized screening plants at its Smyrna, Ga, factory. For more information, call 770/433-2440 or visit www.screenusa.net. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Construction Equipment Guide â€˘ Recycling Section â€˘ www.constructionequipmentguide.com â€˘ May 1, 2010 â€˘ Page 43

REMU Screening Buckets Even more productive than big trommels!

Â‡ )RU PL[LQJ VFUHHQLQJ VHSDUDWLQJ DHUDWLQJ SDGGLQJ HWF Â‡ :RUNV ZHOO ZLWK PRLVW DQG GLIÂżFXOW PDWHULDOV

Screening Buckets & Amphibious Excavators ZZZ UHPX Âż

7ROO )UHH

(PDLO

XVD#UHPX Âż

Big Float Amphibious Excavators

Â‡ $PSKLELRXV H[FDYDWRU IRU VKDOORZ DQG PDUVKODQGV Â‡ +\GUDXOLF SRQWRRQ VWUXFWXUH FDQ EH QDUURZHG IRU WUDQVSRUWDWLRQ

These Grinders Mean Business Swanston Equipment Co. 3450 West Main Fargo, ND 58103 888-792-3192 2009 Tub Grinder

3010T Tub Grinder with Track System

Power up your productivity with the impressive ďŹ‚eet of grinders from DuraTech. All DuraTech grinders feature enclosed engine compartments with self-cleaning rotary screens on the air intake and HPTO microprocessor-controlled clutches. They are equipped with CAT diesel engines ranging from 325hp to 950hp. DuraTech takes on heavy-duty jobs with the highest level of efďŹ ciency.

Page 44 • May 1, 2010 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Anaconda Tracked Conveyors Help Keep Costs Down

Anaconda Conveyors USA, Natick, Mass., is importing portable tracked crushers for the aggregate, recycling, demolition, and material handling industries from the manufacturer, Anaconda Conveyors, headquartered in Ireland.

Today, when the cost that an aggregate producer or recycler can demand for his materials is not going up, controlling production costs are more important than ever before and one of the biggest costs incurred is labor and earthmoving equipment. Anaconda Conveyors USA is promoting portable tracked conveyors for the aggregate, recycling, demolition and material handling industries from the manufacturer, Anaconda Equipment, headquartered in Ireland. According to Gordon Terry, general manager of Anaconda USA, based in Natick, Mass., “We have a great deal of confidence in the product that we are selling from Anaconda Equipment and their ability to support the product. Even though they are relatively new to manufacturing tracked conveyors, they have a long history and stellar reputation in the manufacturing of traditional conveyors and equipment for OEM’s in the material handling industry.” The idea of putting tracks on aggregate and material processing equipment is by no means a new one. Portable tracked jaw crushers first started to appear in the U.S. market in the early 1990s.

“The concept of putting a crusher on tracks and bringing the crusher to the material to be crushed versus using loaders and trucks to bring the material to the crusher caught on fast. The savings in fuel consumption, operating costs, and ease of setup translated to significant savings to the owner, and the idea spread like wildfire. Soon to follow was the addition of portable tracked screening plants, and later on, portable tracked cone crushers. The end result was an entire crushing and screening spread that was totally portable and required only one operator, with the exception being stock piling the materials,” Terry said. The onboard conveyors on crushing and screening equipment typically do not allow for large stockpiling capacities. Therefore, an equipment operator with a rubber-tired loader or a wheeled conveyor is necessary to complete the process where stockpiling is necessary. The only alternative to moving the materials with a wheel loader was setting up a conventional conveyor system to stockpile. But a conventional conveyor system is not self-propelled — nor is it easily transported by a single individual using no heavy equipment. Also, most mobile equipment is

far more productive than its predecessor; therefore many conveyors cannot handle the extra capacity. The solution was the Anaconda tracked conveying system, according to Terry. With the addition of the Anaconda tracked conveyor system producers are able to keep their operations down to one person and needs only one loader or excavator to feed the crusher or screener. Additionally, when moving the spread, the Anaconda conveyor has a set up time of about five minutes versus the hour or more involved in moving traditional conveying systems. “Custom crushing and recycling contractors and demolition contractors, who at times find themselves working in areas with a very small footprint now have the option of adding a completely portable tracked conveyor to their crushing spread, which will allow them to stockpile in scenarios where it has not been possible previously. The tracked conveyors are not only extremely portable, but they allow you to work in tight areas and the track system makes the conveyor far more stable. The track system also enables more effective operations where ground conditions are poor. When working

in extremely tight areas Anaconda also offers a hydraulic folding model, which extends out to as much as 60 feet and plan to launch a 75 foot model in the near future” Terry said. For ease of maintenance and repair, all Anaconda portable tracked conveyors are equipped with Caterpillar or Deutz diesel engines and the hydraulic motors are manufactured by Eaton. Looking to Grow “We are currently in the process of setting up distribution in the United States for the Anaconda range of conveyors. We already have distributors in place in the 10 northeastern states and eastern Canada. We are actively looking to expand our distribution and dealer network throughout the country and we are willing to retail the product direct in the states where we are yet to have established dealers,” Terry added. For more information, call 800/285-5721, or visit www.anacondausa.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 1, 2010 • Page 45

TOUGH THEN. Pioneer Engineering Works built their first rock crusher, the Pioneer No. 12 Jaw Crusher, in 1928. And although our name has changed over the years, our dedication to designing and building the world’s toughest, most reliable aggregate processing and recycling equipment has never waivered. That tradition continues today with our full line of crushers, screens, material handlers and aggregate-related products. We were tough then… and we’re even tougher now.

www.kpijci.com

TOUGHER NOW. 12500 South Cicero Ave. Alsip, IL 708/389-7700

Rockford, IL 815/227-0555

Villa Park, IL 630/530-7600

East Peoria, IL 309/694-4455

Ingleside, IL 815/344-0880

Springfield, IL 217/789-0351

Your best choice is Lokotrack Metso offers a complete range of tracked jaw, cone and impact crushers, so you always get the right choice for your operation. Our best-selling Lokotrack LT Series for contractors gives you more options combined with proven reliability, high production and low cost per ton. www.metso.com

Lokotrack LT1213 impactor plant

Page 46 • May 1, 2010 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

General Equipment & Supplies Hosts Aggregate Seminar 2010 General Equipment & Supplies Inc., Fargo, N.D., hosted Aggregate Seminar 2010 on March 2 and 3 at the Holiday Inn, Fargo. The company played host to more than 260 customers who attended educational and application training sessions on a variety of topics. In addition, 20 vendors had booths set up and an extensive equipment display allowed customers to inspect a variety of aggregate and construction machines. Attendees had a chance to relax and socialize at a catered lunch during each day and an after-hours gathering on March 2. Jerry Kern, aggregate equipment manager, General Equipment, explained, “Our goal is for our customers to be as successful as possible. Hosting an event like this is a great way for our customers to see new products, get answers to their questions and hopefully learn a few new things that will help them run a more successful operation.” Brad Rice, territory manager of Major Wire Industries, Candiac, Quebec, Canada, ran three presentations for his company during the course of the two days, covering a wide selection of information on screening media, options for maintenance and solutions for

equipment failure. Each session ended with a question-and answer-session. “This was one of the best shows we’ve ever had,” Rice said. “We had a number of very interested customers who asked a lot of questions. We also had a booth on the show floor and that attracted a great deal of interest as well. I was very impressed with the entire show. What really struck me was the way that all of the principals of General Equipment were present on both days, talking to everyone and answering questions. General Equipment really had their act together and the show was very well presented. It was very professional and up front. General Equipment is a great partner and we love working with them.” Superior Industries LLC, Morris, Minn., also participated in the event. Mary Erholtz, marketing manager, felt that, “General Equipment did a great job putting this together. We were able to showcase new products and we ran seminars to help educate the customers. For us, it was about bringing everyone together and we were able to visit with a lot of our customers, and General Equipment’s customers who use our products, in a very short time. We were so happy to be a part of it.”

Patrick Reaver, Astec Mobile Screens, leads an education session on product applications and offers preventative maintenance tips.

Attendees inspect one of the more than 30 pieces of aggregate and construction equipment on display.

Seminar attendees discuss new products with representatives from Terex.

Indeco’s Multi 1000 Razes the Bar on Large-Scale Jobs Indeco’s Multi 1000 increases the range of its “non-impact” products. Designed to meet the needs of the American market, where large-size equipment is more popular, the Multi 1000 is the ideal tool for large-scale demolition work and can be mounted on carriers from 79,500 to 132,500 lbs. (36,060 to 60,101 kg).

V i s i t C E G ’s We b S i t e a t www.constructionequipmentguide.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • May 1, 2010 • Page 47

Page 48 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CNH Employees Show Support for Troops in Afghanistan TROOPS from page 14

CNH plant worker Kevin Landwehr (L) and Lt. Col. Darrell Bennis. The Colonel told Landwehr how much the troops liked the machines that are coming out of the Wichita, Kan., plant.

Pat Hunt, director of strategic accounts, of Case Construction Equipment updates the media with the military contract news.

Lt. Col. Darrell Bennis (C) receives a plaque with two scale model Case skid steers from Bill Thompson (L), senior manager, of Case Defense Products group and Simon Boag, executive vice president of manufacturing of worldwide Case Construction equipment. Sean Straw (L), skid steer loader product team, Case Construction Equipment, does a walk around for this Case M400T compact track loader, while Lt. Col. Darrell Bennis checks out the interior of the cab.

Pat Hunt (R), Case director of strategic accounts; presents to John English (L) and Lorry Maynard, civilian officials of U.S. Army TACOM, hold a commemorative photo of the new Case skid steer and compact track loader that is being built for the Army.

CNH plant workers demonstrate the team effort required to put an engine into this Case skid steer.

Tracks are being installed on this compact track loader by CNH workers.

Lt. Col. Darrell Bennis, U.S. Army TACOM (Tank-automotive and Armaments Command), describes the new Case military skid steer loader as “the Swiss Army knife” of construction equipment, and predicts that once the machines are put in service, “everyone will want one.” The first 25 units will be deployed to the theater of operations in southwest Asia

Assembly of each machine requires approximately 40 hours of labor. Here, a CNH worker installs hydraulic system components on a M400T compact track loader.

Todd Seeley, Wichita plant manager of CNH, talks about the grouser tracks on this Case skid steer.

Trucks & Trailers

SECTION

Mack mDRIVE Extends Benefits of Pedigreed Components Mack Trucks Inc.’s mDRIVE, its new automated manual transmission (AMT), gives customers up to 1.5 percent improved fuel efficiency, better driveability and enhanced driver satisfaction by automating gear shifting, while improving safety. The Mack mDRIVE is designed and engineered to work exclusively with Mack MP series engines. It will be available on Mack Pinnacle model highway tractors powered by the MP7 and MP8 engines. The mDRIVE was one of several engine and powertrain-related announcements Mack made during the 2010 Mid-America Trucking Show. Mack also introduced the new C150/151 family of rear axles, with new gear ratios tailored for the MP series of engines, as well as new Econodyne engine ratings to maximize fuel economy. “mDRIVE boldly expands Mack’s leadership in heavy-duty powertrains,” said Kevin Flaherty, Mack senior vice president, sales and marketing. “To be considered Pedigreed, the engine, transmission and axles must be all Mack, providing performance and fuel economy second to none. Our customers told us they wanted a Pedigreed-quality AMT and Mack is stepping up with the mDRIVE. Because we build trucks with integrated components, we deliver trucks exactly fitted to customer applications. It’s what we refer to as balanced design. The entire vehicle is more reliable and performs better because each component is designed in concert with the others.” mDRIVE Specifics The Mack mDRIVE has 12 forward and four reverse speeds, and is available in direct drive or overdrive. It has a torque capacity of 1920 lb.-ft. and a dry weight of 615 lbs. (279 kg). The shifting strategy for mDRIVE is optimized for North American highway conditions and is based on cruise speeds of 1,350 to 1,450 rpm for best performance and fuel economy. The driver interacts with mDRIVE through a dashmounted control pad containing manual input and hold shift buttons, with an integral display indicating the current gear. In addition, the Mack co-pilot driver display in the center of the instrument panel provides the driver with transmission status, including the number of upshifts or downshifts available, the current gear and the current operating mode (such as economy or performance). The transmission’s economy mode maximizes time spent in top gear, while performance mode maximizes gradeability. An additional MackCellerator or kick-down feature drops the transmission one gear (while synchronizing

engine RPM) when the accelerator pedal is sharply depressed beyond its detent to maximize acceleration in passing situations. mDRIVE also provides an optional grade gripper or hill start assist when launching the truck on an incline, to prevent the vehicle from rolling backward. It also detects if the tractor is attached to a trailer and auto-

The Mack mDRIVE automated manual transmission has 12 forward and four reverse speeds.

matically reduces torque output if the tractor is bobtailing, which saves fuel. mDRIVE is available in two versions: fleet and premium. The fleet package includes basic shifter controls, with grade gripper and MackCellerator as options. The premium package consists of a shifter with more features for greater driver control, including manual shift inputs, performance and economy modes, plus grade gripper and MackCellerator. mDRIVE is available with two optional rear-mounted power takeoffs (PTO). An important aspect of mDRIVE is the sophistication of its programming. For instance, the optional easy shift feature provides especially smooth shifting for liquid bulk, livestock and similar applications, where abrupt moves need to be avoided.

mDRIVE also addresses a customer concern with other AMTs by allowing the truck to start in higher gears than first if conditions warrant. In addition, Mack’s AMT has an extensive list of customer-programmable parameters and functions, so transmission performance can be dialed in for a specific customer application. Other notable mDRIVE features include: • Cruise’n Brake, which limits engine brake operation while in cruise control until the target speed has been reached • Gear selection adjustment in auto mode, which allows the start gear and driving gear to be manually selected using the premium shifter • Low speed modulation control, which enables clutch management at very low vehicle speeds when using the brake pedal to control vehicle speed, such as when backing into a loading dock or driving onto a weigh scale • Customer predefined splitter position when engaging PTO operation • Auto neutral, which automatically shifts the transmission to neutral if the engine has been shut off while in gear or after four minutes of idling with the parking brake applied; this prevents stalling and reduces the load on the transmission. “Customers who have tested mDRIVE tell me this is one very smart transmission,” said David McKenna, director of powertrain sales and marketing. “mDRIVE’s intelligence, its light weight and its intuitive performance help customers achieve up to an additional 1.5 percent improvement in fuel economy, while making drivers happier. And the fact that drivers don’t have to worry about shifting means they are more focused on driving, with their eyes on the road and both hands on the wheel, which enhances highway safety.” According to McKenna, there are several categories of customers who will find mDRIVE very attractive. Bulk haulers and fuel delivery fleets will benefit from the lightweight 11-L Mack MP7 — mDRIVE combination, especially with the easy shift and PTO flexibility. This combination also will appeal to rental and lease fleets, both daycab and sleeper tractors, since mDRIVE dramatically simplifies driver training and equipment familiarization. When spec’ed with the Mack MP7-405E, the 13-L Mack MP8-415E, MP8-445E or MP8-505E, mDRIVE shines for truckload and regional fleets that demand maximum fuel economy in a lightweight package. mDRIVE operation is integrated with the PowerLeash engine brake to control road speed and increase miles per gallon. For more information, visit www.macktrucks.com.

Page 50 • May 1, 2010 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

CUSTOM BUILT MIDLAND DUMPBODIES & TRAILERS

Mailhot and Custom Telescopic Hoists

Custom Welding & Fabrication – We Repair All Competitor Boxes

• Watson Chalin & Ridewell Pusher & Tag Axles • Toolboxes • Strobes & Vibrators • Custom Contractor & Tree Bodies • PullTarp & Roll-Rite Tarp Systems • Replacement Dump Bodies & Tailgates • Bibeau Dump Bodies • Tafco Platform & Contractors Bodies • Bonnell Sanders & Snow Plows • Wet Kits • Cab Guards • HTC – Hydraulic Truck Conveyors • Frame Stretching 21980 KENRICK AVE. • LAKEVILLE, MN 55044 PHONE: (952) 469-1006 FAX: (952) 469-1152 WWW.MIDLANDEQUIPMENTCO.COM

The Trailblazer 302 Air Pak welds at up to 350 amps, provides 13,000 watts of AccuRated generator power, 26 CFM at 100-percent duty cycle and, now, 450 A (12 V)/350 A (24) V of battery jumping power.

Multi Use Trailblazer 302 Air Pak Compressor Available Miller’s Trailblazer 302 Air Pak welder/generator/air compressor is now available with an internal 12/24 V battery charger and jump starter, eliminating the need — as well as the costs and truck space required — for separate chargers or battery packs to start dead batteries on the job site. The Trailblazer 302 Air Pak provides equipment-repair, construction and structural steel professionals with a self-contained power source that welds at up to 350 amps, provides 13,000 watts of Accu-Rated generator power, 26 CFM of compressed air and, now, 450 A (12 V)/350A (24 V) of battery jumping power. To extend battery life and help eliminate battery failure, the Trailblazer 302 Air Pak provides charging power (10 to 75 A, as set by the operator) until it senses a load from the starter. The jump-starting mode is activated only when it senses a load from the starter. In addition, if the Trailblazer 302 Air Pak senses a battery with a dead cell, a poor connection or an improper voltage setting, it will inform the operator of the error rather than send a charge. The jumper cables use a standard marine plug to connect to the unit and are available separately. The Trailblazer 302 Air Pak’s rotary screw air compressor delivers 70 to 160 psi of air with no storage tank required. It runs most air impact wrenches at idle and provides 100 percent deliverable air, which allows contractors to work continuously without worrying about air pressure. It improves air carbon arc cutting and gouging, and is capable of

working with .25 in. (.6 cm) carbons (rated: 3/16-in.) for most applications, according to the manufacturer. It also provides more than enough power and air to run Miller’s full line of portable Spectrum plasma cutters with a rated cut of 5/8-in. (1.6 cm). The Trailblazer 302 Air Pak features a 30 hp (22 kW) Kohler gas engine, weighs 771 lbs. (350 kg) and measures 59.5 in. (151 cm) long (just 14 in. [35.5 cm] longer than a Trailblazer 302, with the same width and height) by 20 in. (51 cm) wide x 34.25 in. (87 cm) high. It occupies up to 50 percent less truck space and up to 25 percent less axle weight compared to using a separate engine-driven air compressor. More Generator Power The Trailblazer 302 Air Pak provides strong Stick, MIG, flux cored, AC/DC TIG, and air carbon arc gouging and cutting performance. It provides 25 to 300 amps of DC output for Stick, 10 to 300 amps of DC output for TIG, 10 to 225 amps for AC TIG/Stick and 13 to 35 volts (350 amps) for MIG and flux cored welding. The Trailblazer 302 Air Pak’s two-generator design, one for welding and one for power generation, ensures that the welding arc remains stable when power tools are being used. Its 13,000 watts of Accu-Rated generator power (11,000 watts continuous) gives ample power. For more information, call 800/426-4553 or visit www.MillerWelds.com.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • May 1, 2010 • Page 51

Scharber & Sons, Inc. 13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

Naperville 1400 W. Ogden Ave. 630-355-7150 South Holland 310 W. 162 St. Rt. 6 708-331-6362 Rockford 3110 Prairie Rd. 815-961-3160 Wauconda 1560 North Old Rand Rd. 847-526-7700 Rockdale 600 Walnut Ct 815-730-9011 www.westsidetractorsales.com

949 3rd Ave. Windom, MN 56101 507-678-2752

6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949 3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

Columbus Branch 50 E Kingston Ave Columbus, OH 43207 614-443-6541 Fax: 614-449-0182 www.columbusequipment.com Cadiz Branch 290 Old Steubenville Pike Cadiz, OH 43907 740-942-8871 740-942-3611 Canton Branch 1601 Shepler-Church Ave. SW Canton, OH 44706 330-453-4521 330-453-4701

Painesville Branch 864 Richmond Road Painesville, OH 44077 440-352-0452 440-352-0730 Cincinnati Branch 11512 Gondola St Cincinnati, OH 45241 513-771-3922 513-771-6547

Richfield Branch 3942 Brecksville Rd Richfield, OH 44286 330-659-6681 330-659-4760

Dayton Branch 7570 New Carlisle Pike Dayton, OH 45424 937-879-3154 937-879-3688

Toledo Branch 12500 Williams Rd Perrysburg, OH 43551 419-872-7101 419-874-7413

Jackson Branch 1611 Pattonsville Rd Jackson, OH 45640 740-288-0222 740-286-0808

Piketon Branch Piketon, OH 740-289-3757

Page 52 • May 1, 2010 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Big Rock 47W247 US Highway 30 Big Rock, IL 60511 630-556-3111 • Fax: 630-556-3749 Bolingbrook 250 East Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenr y 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Scherer v i l l e 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

St. Joseph Equipment, Inc.

Vermeer Sales & Ser v i c e 1675 126th St. West Burnsville, MN 55337 952-890-6144 Fax: 952-882-2980 www.vermeerofminnesota.com

Midwest Trailers Plus, Inc.

Farm-Rite Equipment Inc.

548 29th St. West Des Moines, IA 50265 515-223-8463 Toll Free: 888-560-2787 Fax: 515-223-6446 www.midwesttrailersplus.com

901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 www.farmriteequip.com

Shakopee Division 6340 Hwy 101 Shakopee, MN 55379 952-445-5400 • 800-795-9274 Fax: 952-445-0365 Duluth Division 4311 Haines Rd. Hermantown, MN 55811 2 1 8 - 7 2 7 - 3 0 3 8 • 80 0 - 7 9 5 - 0 1 1 7 Fax: 218-727-2827 Elk River Division 16200 Hwy 10 Elk River, MN 55330 763-262-4474 • Fax: 763-262-4251 Rochester Division #81, 3584 18th Ave. NW Rochester, MN 55901 507-288-3402 Industrial Division N1626 Wuensch Rd. LaCrosse, WI 54601 608-788-1025 • 800-780-1025 Fax: 608-788-1027 www.stjosephequipiment.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 53

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2009 IROCK Crusher RDS-15 Closed Circuit Crushing and Screening Plant. For more information call Sean Donaghy at 330/931-9595 9-10 EB

2007 Mustang ME3003 - Mini Excavator, with long arm and 16" bucket, 36 HP, 112 Hrs, Full warranty .................................................$24,700 Top Notch Equipment 612/290-0640 8-9 PK

2006 Mustang 2041, 236 Hrs, 67.5" bucket, 43 HP Yanmar, 1350# lift............................$12,900 Top Notch Equipment 612/290-0640 8-9 PK

The 2010 EZ Screen 1200XL, with a 5'x6' screen box, and a patented non-hydraulic screen drive. The EZ 1200XL works with a 1/2 to 2 yard loader. Now with a 20 Horsepower Deutz Diesel Engine.......$39,500 plus freight Other Screens Available 9-10 EB www.ez-screen.com • 866/745-5828

Clean 1999 LX865 Turbo, 2150 Hrs w/ Bolt on Tooth Bar, New Seat, Ready to Work......$9,500 John Devine 414/303-9060 VCES Milwaukee, WI 9-10 JM

2006 Manitowoc 12000 Crawler Crane, 120 Ton, 180'/40', upper boom point, block, ball. Self erection package, aux drum prepped, free fall on main and rear drum, A/C, Serviced and ready to work!........................... Price Reduced $625,000 ..................................................P 9-10 EB Call Andy at (216) 316-1511

2003 John Deere 320 Skid, Cab, Heat, qt, 72" bucket, 1365 Hrs, 66 HP, s/n T00320A101325.... ................................................................$18,500 763/444-8873 8-9 PK

2002 John Deere 250 Open Station, 1810 Hrs, weight kit, KV0250A351153 ...........$12,500 8-9 PK 763/444-8873

2005 Vibromax VM116PDB, s/n JKC8340900, 945 hours, 82" Padfoot Roller with Blade............ ................................................................$43,000 8-9 JM Call Mark @ 630-739-7770

2007 Case DV202, s/n DDD000311, 563 hours, ROPS, 47.2" wide double drum roller, Working Headlights ...............................$25,000 8-9 JM Call Mark @ 630-739-7770

2007 Case DV204, s/n DDD001430, 757 hours, ROPS, 51.2" Wide double drum roller, working headlights................................................$35,000 8-9 JM Call Mark @ 630-739-7770

1994 Dresser 510C, 80 HP, 1.75 yd Bucket, cab, new tires...............................................POR Diesel Machinery 8-9 PK 1-800/456-4005 Ask for Don or Herb

Here ' s how the BARGAIN ADS Work: Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

SEE YOUR BARGAIN AD IN COLOR.

• Supply us with a photo of a machine (Only one machine per Bargain Ad) and a maximum 17 word description plus contact and phone number. • Send Check for $95 with copy to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

1997 JCB 411B, S/N 527497, with 4179 Hrs, $40,000 equipped w/AC, 3rd Function and Forks ..........$ Call 502/456-4050 Ask for Melissa or Albert 9-10 EB

• The ad will run for two consecutive issues.

O N LY $ 5 0 E X T R A

For more information, call Construction Equipment Guide today at

FOR TWO INSERTIONS

800/523-2200

1999 Manitowoc 777 Crawler, 200 Ton, 180’ Main Boom, Self Erection, Cummins Engine, Block, Ball, FOB Atlanta, Georgia Call for Price Call Andy at 216/316-1511 9-10 EB

Page 54 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS AERIAL LIFTS

Misc. Compaction Equip.

Manlifts

2004 CAT 836G, 7159 hours .. ..................................$355,000

All Makes & Models Rental, Parts, Service, Training

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 2006 Cat 303.5CCR, 698 hours ....................$39,900 2005 Cat 330CL, 2,366 hours ..............$199,000 2003 Cat 345BL, 4,941 hours ..............$199,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Modern Equipment Sales & Rental 800/445-4381

CRAWLER TRACTORS

AIR COMPRESSORS

Crawler Tractor

Mini Excavators

Compressors

NH Construction Equipment New & Used Parts & Service

2003 Kubota KX-161-3, cab w/AC, rubber tracks, dozer blade w/hyd. thumb & 2 buckets, good condition, 2300 hours, pictures available .......... ..................................$33,000.

1985 Ingersoll Rand P185WJD, good condition........ ....................................$3,500.

Modern Equipment Sales & Rental 800-445-4381

952-656-7107 Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

ASPHALT EQUIPMENT Asphalt Rollers 2004 Cat CB534DXW, 832 hours ..........................$75,000 2005 Cat CS563E, 287 hours .. ....................................$75,000 2005 Cat CS563E, 1,778 hours ....................................$75,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

2004 4551 2004 3406

Cat D6RXLII, hours ................$139,000 Cat D8RII, hours ................$369,300 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

1997 John Deere 850C LT, S/U blade, OROPS, root rake, very good condition, 6599 hours...... ..................................$59,900. JDE Equipment Co. 616/530-2000 White 285, cab, A/C, 90 HP diesel engine, 2WD, Cat. 2 PTO, 2 set remotes, 6x2 transmission, good condition, pictures available, 4710 hours ...... ....................................$8,500.

Farm-Rite Inc. 908/625-0697 NH Construction Equipment New & Used Parts & Service

2007 John Deere 310J, ROPS, turbo, 4x4, GP loader, 24’’ bucket, very good condition, 71 hours ..........................$58,635. 2007 John Deere 310J, ROPS, 4x4, power S trans., GP front bucket, 24’’ BH bucket, very good condition, 55 hours.......... ..................................$57,200. 2009 John Deere 310SJ, ROPS, turbo, 4x4, PS trans., P controls, ext. hoe, GP loader bucket, 24’’ BH bucket, excellent condition, 38 hours ............ ..................................$73,700. 2006 John Deere 310SG, ROPS, turbo, 4x4, PS trans, P control, ext. hoe, GP bucket, 24’’ BH bucket, excellent condition, 384 hours ..........$57,300. 2004 John Deere 410G, ROPS, 4x4, turbo, P controls, PS trans, ext. hoe, GP bucket, 24’’ BH bucket, good condition, 2862 hours ................$39,500. Industrial Tractor Co. Inc. 843-572-0400

Skid Steer Loaders Modern Equipment Sales & Rental 800-445-4381

4500# Pallet Forks Was $1400. SALE $750.

FORESTRY EQUIPMENT

Landscape Land Plane, 72’’. Was $2150. SALE $1350.

Logging Equipment 1996 Caterpillar 320L stroke delimber, 31” pads, Balderson attachment, good condition, 7157 hours ..................$92,000 Five Star Equipment Inc. 607/775-2006

Track Loaders

Undercarriages

2006 Cat 953C, 1004 hours .... ..................................$135,000 Cat 953C, 3577 hours .............. ..................................$115,000

NEW UNDERCARRIAGE PARTS

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

NEW PARTS Hyundai - Mustang Okada - Sakai Yanmar

6S8800MT Link Assy., (2), 36 section, dry, master pin, 9/16’’ bolt ........................$849.00 Ea. 6S605MT Link Assy., (4), 36 section, dry, split master, 9/16’’ bolt ........................$874.00 Ea. 6S9066MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt............$1,099.00 Ea. 6Y1339MT Link Assy., (4), 36 section, SALT, split master, 9/16’’ bolt............$1,105.00 Ea. 3T6705MT Link Assy., (2), 37 section, SALT, split master, 9/16’’ bolt............$1,150.00 Ea.

Call: John Stevens or Jeff Brooks

Komatsu D30A, D31A, D31B, D37E, D31S, D31P... 6.0126 Pitch

G & H Services, Inc. 973/383-3370 Fax: 373/383-5756

TR1103211292 Track Pad, (118), 14’’ single grouser, 14mm bolt ................$7.39. Ea. TR1113000260 Top Roller (2), complete w/shaft ....$82.00. Ea. TR1113000281 Bottom Roller (9), double flange $103.00. Ea.

MISCELLANEOUS Misc

Service

Service Rock Bucket, 66’’. Was $4500. SALE $2250. Attachments International 218-863-6444 2004 Takeuchi TL150 tracked skid steer, cab, heat, good condition, 4100 hrs ..........$18,500.

We Service What We Sell! Warranty, Maintenance and More! Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors

2009 Iron Works 516, 3 deck, with single sand screw, new .... ................................$119,560.

FORKLIFTS

Hardings, Inc. 219-696-8842

PARTS

Hammers

2007 John Deere 450J, LGP, ROPS, hydro trans., 124’’ 6way blade, very good condition, 1072 hours ................$57,375. 2005 John Deere 650J, LGP, ROPS, hydro trans., 128’’ screen and sweeps, good condition, 1806 ................$57,800.

Industrial Forklifts

Wheel Loaders

Tractor Parts

Gradall/Lull Sales, Service, Training

NH Construction Equipment New & Used Parts & Service

NEED CASE DOZER TRANSMISSION PARTS?

Modern Equipment Sales & Rental 800-445-4381

We supply new & used transmission and differential parts for Terratrac GT, 200, 300 Series. Case 310, 350.

2006 Cat 904B, 3,456 hours.... ....................................$29,000 2005 928GZ, 2519 hours ........ ....................................$87,300 2006 Cat 972H, 3,180 hours.... ..................................$229,000 1998 Cat 990 ............$599,000

SERVICES AVAILABLE: Transmission rebuilding, steering band relining. Full line of Oliver-Cletrac parts stocked.

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Zimmerman Oliver-Cletrac Ephrata, PA 717-738-2573 Fax: 717-733-3529 www.olivercletrac.com

COMPACTION EQUIPMENT

Industrial Tractor Co. Inc. 843-572-0400

EXCAVATORS Hydraulic Excavators

Pneumatic Rollers 2007 Stone SD84X, 84’’ smnooth drum roller, used, 972 hours ................................POR Holland Equipment Co. 801-972-1601

NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Modern Equipment Sales & Rental 800/445-4381

Track Loaders Backhoe Loaders JCB Midi-EX, canopy, 50hp hydrostatic skid steer coupler with detached 10’ backhoe, picture available, mint condition, 10 hours ....................$42,000. Farm-Rite Inc. 908/625-0697

RECYCLING EQUIPMENT Screening Equipment

Farm-Rite Inc. 908/625-0697

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

G & H Services, Inc. 973/383-3370 973/390-7394 Cell Fax: 373/383-5756

Norris Sales Company 610/279-5777

ATTACHMENTS

2003 Cat H160............$55,000 2004 Cat H160............$55,000

Caterpillar D3, D3B, D3C, D4C, 931...6.125 Pitch

Heavy Equipment Sales Co. 763-428-2260 Powerscreen Commander Comes with chutes and screens, Screen sizes your choice. Reconditioned. $49,600. THECO Inc. 763-428-2260

RENTALS Rental Construction Equipment Rentals Modern Equipment Sales & Rental 800/445-4381

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 55

www.norrissales.com Daily - Weekly - Monthly Competitive Rates Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders!

SCRAPERS

TRAINING

Motor Scrapers

Operator Training

1998 Cat 627F, 9,740 hours .... ..................................$299,000 1998 Cat 627F, 10,307 hours .. ..................................$299,000

Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

Now in PA & NJ Norris Sales Company 800/547-RENT (7368) 610/279-5777 Construction & Industrial Equipment Rentals

Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Pull Behind Scrapers

Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping

2005 Miskin D-18, Pull Pan Scraper, good condition, 800 hours ..........................$38,000.

Norris Sales Company 610/279-5777

Hardings, Inc. 219-696-8911

Construction & Equpment & Supplies for the “Professionals”

TRAILERS

Daily - Weekly - Monthly & Long Term Rentals Available Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777

Gooseneck Trailers 2003 Landoll 825, 50’, 30’ well, rubber & brakes 50%, aluminum pull outs to 13’, average condition. Midwest Trailers Plus, Inc. 888-560-2787

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

TRENCHER Trenchers 2008 Tesmec TRS1085, 85-90k lbs., elevated cab, counter weights, offset trencher, self leveling double grouser, 8’x18’ double K chain and 24’’ base plates, great condition, 790 hours ..................................Call

2006 Tesmec TRS950, self leveling, enclosed A/C cab, dual gearbox, single grouser, 6’x16’’ single chain, 4.5 Pitch, 55-60k lbs, good condition, 1441 hours ..........................................Call 405-348-4633

TRUCKS Articulating Trucks 2004 JCB 714, A/C, side boards, very good condition, 3048 hours ................$52,500.

Subscribe to CEG today... Get an edge on your competition! Construction Equipment Guide Midwest Edition subscribers are the best informed about construction news, construction equipment, sales, auctions, equipment prices, trends and changes in the industry and activities of its people. Call Toll Free! We now accept Visa, Mastercard & American Express!

SUBSCRIPTIONS:

One Year $65 (within United States & Puerto Rico Only)

CARDMEMBER’S NAME _________________________________________________________ COMPANY NAME _______________________________________________________________

JDE Equipment Co. 616/530-2000

Misc Trucks

STREET____________________________________ PHONE NO. ________________________ CITY ______________________________________STATE _______ ZIP ________________ TYPE OF BUSINESS _____________________________________________________________

2004 Cat 735, 4,035 hours ...... ..................................$249,000 2005 Cat 735, 3,738 hours ...... ..................................$269,000 2006 Cat 740, 3,320 hours ...... ..................................$305,000 1994 Cat D350D, 20,412 hours ..........................$49,000 Ransome CAT Call Tom Rosser 215-245-2749 or Joe Villa 215-245-3729

Check Enclosed

VISA

MASTERCARD

American Express

CARD NUMBER

EXP. DATE (Mo./Yr.) SIGNATURE OF AUTHORIZED CARDHOLDER

TOLL FREE ®

1-800/523-2200 FAX 215/885-2910

470 Maryland Dr. • Ft. Washington, PA 19034 Email: circulation@cegltd.com

Industry Recalls Thomas Skodack’s Integrity, Professionalism Thomas (Tom) Skodack, a comfort and we all learned a great regional sales manager of deal about classical music from Sennebogen LLC, surrounded by him.” family, lost his courageous battle Mr. Skodack enjoyed living in with cancer on April 13, 2010. the midwest as it allowed him to Although only with Sennebogen spend more time with his family and since January of 2006, Mr. Skodack his grandchildren. A resident of had spent his life making friends in Kansas City, Mr. Skodack was born the equipment industry wherever he in 1946. He is survived by his wife went. With more than 30 years in the Jamie and his daughters Pia and material handling industry alone, Cara and his grandchildren Erik, Mr. Skodack’s professionalism, honMatthew, James and Achaia. esty, hard work and knowledge of “We mourn the passing of Tom the business made him a valuable Skodack who during his time with addition to the Sennebogen team as Sennebogen contributed greatly to well as to every dealer and customer our ongoing success and was instruhe ever worked with. mental in bringing us to where we In his announcement to the are today,” said Constantino Sennebogen organization, Lannes. “To us, he provided a Constantino Lannes, president of model to follow and live up to.” Sennebogen LLC, paid tribute to his Services were held Friday, April dear friend whom he had known 16, 2010 at Penwell-Gabel since 1995. Mortuary, Olathe, Kan. With more than 30 years in the material handling industry alone, Thomas Skodack’s profession“Tom was an inspiration to all of alism, honesty, hard work and knowledge of the business made him a valuable addition to the Donations in Tom Skodack’s us. Everything I learned about the Sennebogen team as well as to every dealer and customer he ever worked with. memory may be made to: North American marketplace I Interlochen Center for the Arts learned from him. His passion to deliver efforts to support customers. Regardless of was there for them.” P.O. Box 199 (U.S. Mail) Music was a big part of his life and only the best in terms of customer support is how far away they were, what time of the Interlochen, MI 49643-0199, something that we share and brought us day they reached him or what day of the according to his wife Jamie, “His love of 231/276-7200 together as friends. Tom never spared any week it was, when his help was needed, he fine music brought him a lot of joy and http://www.interlochen.org

Page 56 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. FELCO WHEEL COMPACTION BUCKET • LOOKING FOR A FELCO WHEEL COMPACTION BUCKET FOR A CAT 322 EXCAVATOR Contact: CODY Phone: 307-682-4346 Email: cody.thies@earthwork.us.com –––––––––––––––––––––––––––––––– KOMATSU PARTS • NEED X-ROD PART#707-58-370 Contact: ROBERTO J PALACIOS Phone: 786-287-7056 Fax: 305-573-7038 Email: cargoawaycorp@live.com –––––––––––––––––––––––––––––––– FULL SIZE EXCAVATOR BUCKET • I NEED A 24 INCH BUCKET FOR A VOLVO EXCAVATOR Contact: NINO Phone: 412-865-6935 Fax: 724-695-3271 Email: cnexcavation@verizon.net –––––––––––––––––––––––––––––––– 270 EXCAVATOR Contact: DAVE Phone: 309-275-1927 Email: dcexcavating@aol.com –––––––––––––––––––––––––––––––– WE YOUR EQUIPMENT! • WE BUY CAT, KOMATSU WHEEL LOADERS, EXCAVATORS MOTOR GRADERS & DOZERS • WE ARE LOOKING FOR ALL SIZES OF CAT & KOMATSU WHEEL LOADERS ANY YEAR OR MODEL. WE ALSO BUY CAT & KOMATSU MOTOR GRADER, EXCAVATORS AND DOZERS. WE ALSO BUY ANY/ALL PARTS MACHINES. CALL SCHEER BROTHERS, LLC ASK FOR RHONDA OR DAVE Contact: RHONDA SCHEER Phone: 610-544-3399 or 484-326-9494 Email: rhonda@scheerbrothers.com –––––––––––––––––––––––––––––––– BOLT ON TRACK KIT FOR CAT 252B SKID STEER Contact: MARK MITCHELL Phone: 815-693-0319 Email: mark.mitchell402@yahoo.com –––––––––––––––––––––––––––––––– TRACTOR(COMPACT) • 25 TO 35 DIESEL WITH FRONT LOADER,NO CHINESE OR EASTERN EUROPE. Contact: WILLIAM BRIGGS Phone: 434.632-6643 Email: riserman@hotmail.com –––––––––––––––––––––––––––––––– LEIBHEER PR751 Contact: RON Phone & Fax: 989 -723-6084 Email: rfuoss@peoplepc.com –––––––––––––––––––––––––––––––– EXCAVATOR BUCKET Contact: K SANSALONE Phone: 856-297-4758 Fax: 856-362-5602 Email: kevin@sansaloneexcavating.com –––––––––––––––––––––––––––––––– KOMATSU WA380/420 WHOLESALE • NE LOC. Contact: RICHARD Phone: 603 828-6100 Email: cmisold@yahoo.com ––––––––––––––––––––––––––––––––

CAT 320B Contact: KIAN RASEKHI Phone: 908-757-4600 Fax: 908-757-4660 Email: nuco@nucollc.com –––––––––––––––––––––––––––––––– 2000 TO 2003 CAT 14H WITH RIPPER Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– ROCKLAND TRACK LOADER BUCKET Contact: SCOTT OR DEREK Phone: 410-893-0580 Fax: 410-893-3988 Email: adam@easternsteel.net –––––––––––––––––––––––––––––––– CAT 910F • CAT 910F BURNED OR WRECKED PARTS MACHINE WITH CAB/EROPS Contact: JOE Phone: 201-805-8005 Fax: 201-612-2839 Email: atsjjob@aol.com –––––––––––––––––––––––––––––––– DYNAPAC SMOOTH DRUM ROLLER • WE WANT TO BUY DYNAPAC ROLLER, CA25, CA251, CA30 IN GOOD CONDITION AND SHIP TO EGYPT Contact: IBRAHIM Email: ibrahimmashali@gmail.com –––––––––––––––––––––––––––––––– WANT TO BUY TOOTH AND PINS • 144 TOOTH 234-785-1121 144 PIN 113-7821170 FOR A KOMATSU GD555-3A OEM OR AFTERMARKET Contact: ROBERTO J PALACIOS Phone: 786-287-7056 Fax: 305-573-7038 ask for tone Email: cargoawaycorp@live.com –––––––––––––––––––––––––––––––– RHINO 6FT BUSHHOG 3PT • ONE HOPEFULLY CLOSE TO TULSA,OKLA. IN FAIR TO GOOD CONDITION. PRICED IN THE 400.00 RANGE. Contact: MIKE Phone: 918-728-2166 Email: karenm1345@yahoo.com –––––––––––––––––––––––––––––––– GENERAL PURPOSE BUCKET FOR CAT 966C • WE ARE LOOKING FOR A GOOD USED GENUINE CATERPILLAR GENERAL PURPOSE BUCKET FOR A CAT 966C. WE WILL ALSO LISTEN TO ANY OFFERS FOR AN AFTERMARKET BUCKET. Contact: WENDELL CAIN Phone: 770-381-8984 Fax: 770-381-6977 Email: wendell@cainandtodd.com –––––––––––––––––––––––––––––––– TAMROCK AND ATLAS COPCO DRILLS Contact: SELIM DINC Phone: +905325446465 Email: slmdnc@gmail.com –––––––––––––––––––––––––––––––– TAMROCK AND ATLAS COPCO DRILLS Contact: SELIM DINC Phone: +905325446465 Email: slmdnc@gmail.com ––––––––––––––––––––––––––––––––

QUICK COUPLER\BUCKET\FORKS FOR DEERE 644H Contact: ROGER BAKKER Phone: 902-626-6217 Fax: 902-964-3062 Email: excellcarriers@aol.com –––––––––––––––––––––––––––––––– CAT GRADER 140G FROM 1990 TO 1999 Contact: AZEEM BHATTI Phone: 416-312-1787 Email: mbhatti777@hotmail.com –––––––––––––––––––––––––––––––– CRAWLER DOZER HAVE PETERBUILT LOGGER WANT TO TRADE FOR DOZER WITH RIPPERS Contact: BILL BOITANO Phone: (209)267-5603 Fax: (209)267-1523 Email: wmjb3@att.net –––––––––––––––––––––––––––––––– CAT D3 BLADE ASSEMBLY I AM LOOKING FOR A D3 BLADE ASSEMBLY. PREFERABLY NEW. Contact: DARREN DEVOE Email: ddevoe@schramminc.com –––––––––––––––––––––––––––––––– ASPHALT PAVER CATERPILLAR AP1055B, AP1050, BARBER GREENE BG245 Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– KOMATSU PC27MR FINAL DRIVE LOOKING FOR A FINAL DRIVE FOR A KOMATSU PC27MR-2 EXCAVATOR Contact: TIM LEWANDOWSKI Phone: 724-887-9375 Email: lewequip@gmail.com –––––––––––––––––––––––––––––––– 2001 KOMATSU PC400 WORK READY, WHOLESALE Contact: RICHARD Phone: 603 828-6100 Email: cmisold@myfairpoint.net –––––––––––––––––––––––––––––––– NEED TO BUY D6M L G P WITH UNDER C4500 ON THE METERS CONTRACTOR Contact: JEAN MAURICE BOUTIN Phone: 1 450 346 8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– WE BUY CAT, KOMATSU WHEEL LOADERS, EXCAVATORS MOTOR GRADERS & DOZERS WE ARE LOOKING FOR ALL SIZES OF CAT & KOMATSU WHEEL LOADERS ANY YEAR OR MODEL. WE ALSO BUY CAT & KOMATSU MOTOR GRADER, EXCAVATORS AND DOZERS. WE ALSO BUY ANY/ALL PARTS MACHINES. CALL SCHEER BROTHERS, LLC ASK FOR RHONDA OR DAVE. Contact: RHONDA SCHEER Phone: 610-544-3399 OR 484-326-9494 OR 484-844-4395 Fax: 610-935-5730 Email: rhonda@scheerbrothers.com ––––––––––––––––––––––––––––––––

DYNAPAC ROLLERS/COMPACTORS CA251, CA262, CA301, CA302, CA362. OFFER US & KINDLY SEND ME DETAILS, PHOTOS, SERIAL #, YEARS & YOUR BEST PRICE. WE WILL APPRECIATE ALL YOUR OFFERS. Contact: NAQIB KHAN Phone: +92-333-3298751 Email: naqib_khan73@yahoo.com –––––––––––––––––––––––––––––––– D7,120,325BL,330BL,330L Contact: YANKIER GOMEZ Email: yankier_gomez@yahoo.com –––––––––––––––––––––––––––––––– KOBELCO SK210 OR 200 Contact: UGLY TRUCKS & EQUIPMENT Email: uglytrucks55@yahoo.com –––––––––––––––––––––––––––––––– STICK CYLINDER A USED STICK CYLINDER FOR AROUND 2,000 OR SO Contact: DANA BRYAN Phone: 870 828 9598 Email: killmekissme911@yahoo.com –––––––––––––––––––––––––––––––– CASE W14S & W20S Contact: FRANK HORAN @ TRICO EQUIPMENT Phone: 800-654-USED (8733) Fax: 856-697-4842 Email: fhoran@tricoequipment.com –––––––––––––––––––––––––––––––– EXCAVATOR AND BULLDOZER Contact: CHRIS MOU Phone: +852-24839593 / 97230292 Fax: +852-24883273 Email: everluck@everluckmach.com.hk –––––––––––––––––––––––––––––––– BLAW KNOX 195D ROAD WIDNER Contact: WADE VAN HAUEN Phone: 319-345-2713x211 Fax: 319-345-2991 Email: wade@petersoncontractors.com –––––––––––––––––––––––––––––––– DOZER DRESSER TD25E • RUNNING OR PARTS Contact: RICHARD Phone: 603-828-6100 Email: cmisold@myfairpoint.net –––––––––––––––––––––––––––––––– CMI PR600 MILLING MACHINE L/S ENDSLIDE • L/S ENDSLIDE FOR CMI PR600 MILLING MACHINE Contact: TONY LAURO Phone: 516-681-7600 Fax: 516-938-8962 Email: alauro@malveseequipment.com –––––––––––––––––––––––––––––––– CATERPILLAR D5B 1984 AND UP WITH RIPPER , TILT BLADE • DOZER CAT, OR KOMATSU D41P6 TILT BLADE WITH RIPPER Contact: OSCAR VILLAMIL Phone: 256-479-8711 Email: o_suillyhond2000@yahoo.es –––––––––––––––––––––––––––––––– DYNAHOE 1900 WANTED Contact: ALAN RETTIG Phone: 901-481-7360 Email: zena872@netzero.com –––––––––––––––––––––––––––––––– PRESSURE TRUCK Contact: MARK SCOTT Phone: 306-421-0546 Email: markscott1@sasktel.net ––––––––––––––––––––––––––––––––

CONCRETE CATCH BASIN FORMS • LOOKING TO BUY ANY 24" CENTER OR 30" CENTER (INSIDE) CATCH BASIN FORMS, PREFERABLY HYDRAULIC, BUT TAPERED CORE IS OKAY. PLEASE CONTACT WITH ANY SIZE AVAILABLE - ALL HEIGHTS CONSIDERED. Contact: HAROLD BIHR Phone: 716-997-2448 Fax: 716-677-3804 Email: nalod76@gmail.com –––––––––––––––––––––––––––––––– JOHN DEERE 595 OR 595D WHOLESALE OR SALVAGE ONLY • I AM SEEKING WHOLESALE PRICED OR SALVAGE JOHN DEERE 595 OR 595D MOBILE EXCAVATORS. NON-RUNNING PARTS MACHINES WILL BE CONSIDERED AS WELL. INCLUDE PHOTOGRAPHS / CONDITION ETC. Contact: JEFF LAWSON Phone: 864-542-4369 Email: jlawson29321@charter.net –––––––––––––––––––––––––––––––– HYDRAULIC CRAWLER CRANES • 80 TO 100 TON HYDRAULIC CRAWLER LATTICE BOOM CRANE Contact: D SUMNER Email: dave.sumner@cicb.com –––––––––––––––––––––––––––––––– BARBER GREENE 750 ROAD WIDENER DESCRIBE WHAT YOU WANT. Contact: WADE VAN HAUEN Phone: 319-345-2713x211 Fax: 319-345-2991 Email: wade@petersoncontractors.com –––––––––––––––––––––––––––––––– KUBOTA RV500 Contact: S.HILTON Phone: 386-325-8100 Email: philton36@yahoo.com –––––––––––––––––––––––––––––––– LAWN AEREATOR Contact: LUIS VERA Phone: 425-280-7845 Email: luis.vera56@yahoo.com –––––––––––––––––––––––––––––––– CAT D5N LGP OROPS Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– 966G/972G QUICK COUPLER AND RAKE • 966G OR 972G CAT HYD. QUICK COUPLER WITH SUPPLY GROUP AND RAKE. Contact: MICK Phone: 352-527-0072 Email: solutions@fieldco.biz –––––––––––––––––––––––––––––––– WHEEL LOADERS, EXCAVATORS, CRAWLER CRANES • 1)EXCAVATOR 40/45, 60/65 & 80 TON CAPACITY 2)WHEEL LOADERS OF BUCKET CAPACITY 4 - 4.5 M3 & 5-7 M3 3)CRAWLER CRANES 70, 90-120 & 150 TONS. Contact: JAFER PATEL Phone: +96899852158 Fax: +96826750813 Email: plant.khatmatport@gmail.com ––––––––––––––––––––––––––––––––

185 CFM COMPRESSOR • UNDER 1000 HOURS, GOOD CONDITION Contact: CRAIG MORRISON Phone: 425-508-1039 Fax: 425-482-3342 Email: craig@edgeconcretellc.com –––––––––––––––––––––––––––––––– CEDAR RAPIDS • LOOKING FOR A CEDAR RAPIDS HORIZONTAL SCREEN TO REPLACE MY OLD SCREEN. I AM LOOKING FOR ONE THAT HAS BEEN REBUILT OR HAS LOW HOURS. Contact: MATT PECKENPAUGH Phone: 208-308-1777 Fax: 208-734-6852 Email: jmpeckenpaugh@hotmail.com –––––––––––––––––––––––––––––––– RETRACTION 3 1980 TO 1989 CAT 235 Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– NEED TO BUY 2 BULLDOZERS D6N L G P ENC CAB WITH RIPPER CONTRACTOR LOW HOURS FAST Contact: JEAN MAURICE BOUTIN Phone: 1-450-346-8975 Email: jeanmauriceboutin@videotron.ca –––––––––––––––––––––––––––––––– 4 CAT 769C TRUCKS Contact: RICHARD Phone: 603-828-6100 Email: cmisold@myfairpoint.net –––––––––––––––––––––––––––––––– 1994 TO 1999 CAT D8R OUTFITTED ANY WAY Contact: RANDY REECE Phone: 770-966-9056 Fax: 770-966-9035 Email: randy@globalequipmentexporters.com –––––––––––––––––––––––––––––––– WANTED !!! KOMATSU ENGINE SAA6D170E-3 Contact: TIAGO DONATO Phone: +55 19 8120-7777 Email: tiago.donato@jaxmachinery.com –––––––––––––––––––––––––––––––– 225A LOGGER. ENGINE NET POWER:49 KW. OPERATING WEIGHT: 5,200KG GRADE CAPACITY: 0.35 SQ METERS Contact: TAREMWA Phone: +256772635919 Email: staremwa@ccsabco.co.za –––––––––––––––––––––––––––––––– WHEEL LOADERS • I WANT TO BUY CAT 950, 966, 970 WHEEL LOADERS RANGE FROM 1975-2000 Contact: TONY THOMAS Phone: 818-956-5231 Fax: 818-956-5239 Email: tonythomas@pacificcranes.com –––––––––––––––––––––––––––––––– FORD/ NEW HOLLAND 555E ENGINE COVERS • LOOKING FOR 2 CRACKFREE ENGINE COVERS FOR 1997 FORD/ NEW HOLLAND 555E BACKHOE. Contact: GUY GENEST Phone: 860-604-6934 Fax: 860-647-8174 Email: guy@silktownroofing.com ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 57

Big Equipment BETTER AUCTIONS. UPCOMING AUCTIONS TWIN MAY 5. 9 A.M. PUBLIC UNRESERVED CITIES MAY 6. 9 A.M. DES MOINES JUNE17.9 A.M. LOCAL TIME

LOCAL TIME

www.catauctions.com Cat Services • Register to bid online • Detailed inspection reports Auction details • Actual Photos • Videos of equipment in action Transportation quotes • View up-to-date, detailed equipment listings Auction Administered by Taylor & Martin, Inc. – MN Auction License Nos.: 7009004, 7009005, 7009006, 7009009. Titled motor vehicles and equipment will be sold by Ziegler, Inc., Minnesota Dealer License DLR17637

Follow the new leader.™ www.catauctions.com

CAT AUCTION SERVICES 8050 County Road 101 East Shakopee, MN 55379 866.750.9432 info@catauctions.com

©2010 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Page 58 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com Phone: 315-633-2944 • Dallas, TX Wed., May 5, 2010 For: Large late Model Construction, Support Equipment, Trucks & Trailers • Buffalo, NY Sat., May 8, 2010 For: Late Model Cat Construction Equipment, Dump Trucks, Tractor and Trailer Auction • Sacramento, CA Sat., May 8, 2010 For: Late Model Construction, Forklift, Aerial Lift, Support Equipment Trucks & Trailers • Canastota, NY Sun., May 9, 2010 For: Large Compact, Utility, Support Equipment, Plus Construction, Aerials & Forklifts, Support Equipment Auction

• Syracuse, NY Sat, July 17, 2010 For: Lyon’s Annual Summer Hay Camp & Friday Night Barbeque: Late Model Construction, Support Equipment, Aerial Lifts, Trucks & Trailers • Middletown (Florida), NY DATE TBA For: Rental Fleet Construction Equipment, Support, Aerial Lifts, Trucks & Trailers • Detroit, MI DATE TBA For: Complete Liquidation of Construction and Support Equipment RITCHIE BROS. AUCTIONEERS www.rbauction.com Phone: 402-421-2631

Coming Auctions • Anchorage, AK June 5, 2010 • San Antonio, TX June 1, 2010 • Meppen, Germany June 8, 2010 • Tipton, CA June 8, 2010 • Detroit, MI June 9, 2010 • Hyderbad, India June 9, 2010 • Houston, TX June 9-10, 2010 • Pittsburgh, PA June 10, 2010

• Dubai, UAE May 3-5, 2010

• Denver, CO June 10-11, 2010

• Truro, Nova Scotia May 4, 2010

• Kansas City, MO June 11, 2010

• Spokane, WA May 5, 2010

• Nashville, TN June 15, 2010

• Fort Worth, TX May 6-7, 2010

• Atlanta, GA June 17, 2010

• Torreon, Mexico May 11, 2010

• Brisbane Australia June 22, 2010

• Des Moines, IA Sat., May 15, 2010 For: Rental Fleet Construction, Forklifts, Aerials, Cranes, Support Equipment

• St. Aubin Sur Gaillon, France May 11, 2010

• Minneapolis, MN June 22, 2010

• Toronto, CAN Sun., May 16, 2010 For: Light Construction Equipment, Large Quantity of New Support Equipment

• Toronto, ONT, CAN May 11-12, 2010

• Mobile, AL Wed.-Thurs, May 12-13, 2010 For: 2 Day Liquidation of Very Large Shipyard

• Albany, NY Sat., May 22, 2010 For: Complete Liquidation of Late Model Cat, John Deere Construction Equipment, Trucks, Trailers and Support Equipment • Orlando, FL Wed., May 26, 2010 For: Large Rental Fleet Earthmoving Equipment, Aerials, Forklifts, Support, Trucks & Trailers • Tampa, FL Thurs., May 27, 2010 For: Complete Liquidation Late Model Cat, John Deere Construction Equipment Plus Late Model Support • Houston, TX Tues., June 8, 2010 For: Late Model Construction, Support Equipment, Trucks & Trailers

• Los Angeles, CA May 11-12, 2010

• Rockford, IL May 12, 2010 • Minot, ND May 13, 2010 • Prince George, BC, CAN May 15, 2010 • Chicago, IL May 13, 2010 • Las Vegas, NV May 14, 2010 • Krakow, Poland May 18, 2010 • Bozeman, MT May 18, 2010 • Chilliwack, BC, CAN May 19, 2010 • Caorso, Italy May 20, 2010 • Sacramento, CA May 20-21, 2010 • Montreal, QC, CAN May 20-21, 2010 • Panama City, Panama May 21, 2010 • Orlando, FL May 25-26, 2010

• Manassas, VA Fri., June 11, 2010 For: Construction Equipment, Trucks, Trailers, Aerial Lifts, Quantity of Support Equipment

• Narita, Japan May 27, 2010

• Atlantic City, NJ Sat.-Sun., June 19-20, 2010 For: Late Model Construction, Support Equipment, Trucks & Trailers

• North East, MD June 3-4, 2010

• Olympia, WA May 27, 2010 • Ocana, Spain June 3-4, 2010

• Reno, NV June 4, 2010 • Polotitlan, Mexico June 4, 2010

• Columbus, OH June 23, 2010 • Geelong, Australia June 24, 2010 • St. Louis, MO June 29, 2010 BAR NONE AUCTION www.barnoneauction.com Phone: 866-372-1700 • Sacramento, CA Sat., May 8, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., May 21, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., June 12, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., June 25, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., July 10, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., July 23, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., August 14, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Thurs.-Sat., August 26-28, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., September 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., September 24, 2010 For: Commercial Truck and

Heavy Equipment Auction • Sacramento, CA Sat., October 9, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., October 22, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Thurs.-Sat. November 1113, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., November 19, 2010 For: Commercial Truck and Heavy Equipment Auction • Sacramento, CA Sat., December 11, 2010 For: Commercial Truck and Heavy Equipment Auction • San Bernardino, CA Fri., December 17, 2010 For: Commercial Truck and Heavy Equipment Auction BUNCH BROTHERS AUCTIONEERS www.bunchbrothers.com Phone: 270-376-2992 • Middletown, OH Thurs., May 13, 2010 For: Surplus Equipment from Martin’s Excavating CAT AUCTION SERVICES www.catauctions.com Phone: 866-750-9432 • Twin Cities, MN Wed.-Thurs., May 5-6, 2010 For: Construction Equipment, Trucks, Trailers • Des Moines, IA Thurs., June 17, 2010 For: Construction Equipment, Trucks, Trailers DEANCO AUCTIONS www.deancoauction.com Phone: 601-656-9768 • Philadelphia, MS Wed. - Thurs., May 26-27, 2010

• Somerset, PA Thurs., May 20, 2010 For: Complete Liquidation – Godin Mining, Inc.

G.W. McGREW AUCTION COMPANY www.mcgrewequipment.co m Phone: 717-428-0922

INSIGHT AUCTIONEERS www.insightauction.com Phone: 863-386-1225

• Seven Valleys, PA Mon., May 10, 2010 For: Tractors, Backhoes, Skid Steers and Lots of Equipment!

• Sebring, FL Saturday, May 15, 2010 • Sebring, FL Saturday, July 17, 2010

• Tampa, FL Sat., September 11, 2010 • Tampa, FL Sat., October 9, 2010 • Tampa, FL Sat., November 13, 2010 • Tampa, FL Sat., December 11, 2010 UTILITY AUCTIONS www.utilityauctions.net Phone: 302-530-9103 • Wilmington, DE Fri., June 25, 2010 For: Construction and Utility Equipment VAUGHAN AUCTION GROUP www.vaughanauctiongroup.com Phone: 903-873-6777

IRAY AUCTIONS www.iraymn.com Phone: 320-968-7230

• Marquette, MI September TBA For: CCMO – Mining Equipment, Trucks

• Wills Point, TX Thurs., May 13, 2010 For: Spring Contractor’s Public Auction

• Lime Springs, IA Fri., May 21, 2010 • Foley, MN Fri., June 4, 2010 • Portage, WI Fri., July 16, 2010 • Foley, MN Fri., September 17, 2010 • Portage, WI Fri., October 15, 2010 • Foley, MN Fri., December 3, 2010 IRON PLANET AUCTIONS www.ironplanet.com Phone: 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

• Thurs., May 13, 2010 For: Construction Equipment

• Chaffee, NY Thurs., May 6, 2010 For: Surplus Equipment from Gernatt Asphalt Products

• Tampa, FL Sat., August 14, 2010

• Wausau, WI Sat., June 19, 2010 For: Construction Equipment, Truck & Trailer Auction

FREY & SONS, INC. www.freyandsons.com Phone: 419-455-3739

HUNYADY AUCTION COMPANY www.hunyady.com Phone: 800-233-6898

NITKE AUCTIONS www.nitkeauctions.com Phone: 715-362-6162

• Tampa, FL Sat., July 10, 2010

• Sebring, FL Saturday, September 18, 2010

• Thurs., May 6, 2010 For: Construction Equipment

• Dayton, OH Wed., May 12, 2010 For: Equipment from ToppShape Enterprises

• Meggett (Charleston), SC Thurs., May 6, 2010 For: Construction Equipment, Trucks & Trailers

• Bushkill, PA Wed., May 26, 2010 For: Surplus Equipment from Alan Siberini Excavating

• Philadelphia, MS Thurs., July 15, 2010

• Archbold, OH Thurs., May 6, 2010 For: Excess Construction Equipment from Local Contractors

MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com Phone: 800-763-2728

KISSIMMEE AUCTION CO. www.kissimmeeauction.com Phone: 800-782-4506 • Spartanburg, SC Thurs., May 20, 2010 For: Construction and Forestry Equipment, Heavy Duty Trucks & Trailers MANHEIM AUCTIONS www.manheimauctions.com Phone: 800-437-0327 • Harrisonburg, VA Sat., May 8, 2010 For: Public Truck Auction

• Wausau, WI Fri.-Sat, October 22-23, 2010 For: 2-Day Construction Equipment, Truck & Trailer Auction PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com Phone: 860-642-4200 • Columbus, OH Fri., May 14, 2010 For: Earthmoving, Site Development and Paving Equipment, Truck Tractors, Dump Trucks, Trailers and Fleet Vehicles • Middlesex, NJ Thurs., May 20, 2010 For: Earthmoving, Paving & Milling Equipment, Trucks, Trailers and Fleet Vehicles • Wharton, NJ Sat., June 5, 2010 For: Earthmoving and Paving Equipment, Dumps, Service Trucks, Trucks and Trailers, Fleet Vehicles RITCHASON AUCTIONEERS INC. www.ritchason.com Phone: 800-806-3395 • Lebanon, TN Sat., June 19, 2010 • Lebanon, TN Sat., September 18, 2010 • Lebanon, TN Sat., December 11, 2010 TAMPA MACHINERY AUCTION, INC. www.tmauction.com Phone: 813-986-2485 • Tampa, FL Sat., May 8, 2010 • Tampa, FL Sat., June 12, 2010

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.co m Phone: 763-389-2700 • Slayton, MN Thurs., May 6, 2010 For: Construction Equipment, Trucks, Trailers, Shop Equipment & Tools • Corcoran, MN Thurs., May 13, 2010 For: Real Estate, Trucks, Trailers, Forklifts and Rigging Equipment • Princeton, MN Sat., June 5, 2010 For: Heavy Equipment, Trucks and Trailers WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com Phone: 760-731-7760 • Perris, CA Fri., June 11, 2010 For: Construction Equipment YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com Phone: 419-865-3990 • Bow, NH Thurs., May 13, 2010 For: 14th Annual Spring Absolute Consignment Auction • Trenton, MI Thurs., May 20, 2010 For: Partial Liquidation ABC Paving Co. • Darlington, PA Thurs., June 17, 2010 For: Consignment Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 59

3 - CONSTRUCTION EQUIPMENT AUCTIONS THURSDAY, MAY 6 - 9:00 AM EXCAVATORS, BACKHOES, LOADERS, DOZERS, SKID LOADERS, COMPACTION, TRUCKS, TRACTORS, DUMP TRUCKS,TRAILERS, SHOP EQUIPMENT AND TOOLS

Auction Thursday, May 6, 2010 - 9:30am Archbold, Ohio

MIDSTATES UTILITES INC 1495 141st St Slayton, MN 56172

Note: Excess equipment from local contractors. See details at freyauctions.com Online bidding thru proxibid.com Location: Rd. 24, Archbold, Ohio. Terms: 10% buyer premium on items $2500 and less. Pay in full sale day by guaranteed funds.

THURSDAY, MAY 13 - 9:00 AM

Excavators, Cranes & Dumps: '01 Cat 322CL 60' Long Reach; Cat 345BL, SN: 4SS00709, Std stick; Cat 345BL, SN: 4SS247, Std Stick; Cat 330L, SN: 5YM01310; Linkbelt 3400 60' Long Reach; JD 892E-LC Exc; LinkBelt 2800CII Exc.; Cat Grapple, Fits 345B. Grove RT528C RT Crane; P&H Omega 20 RT Crane; Linkbelt HSP25 Hyd. RT Crane; LinkBelt LS318 HiCab Crawler Crane, 60' Boom; (2) Volvo A40 Artic Dumps, SN: 60155 & 1235, Tailgate; Cat 350D Artic Dump, SN:9RF355; Terex 3066C Water Truck; '80 Agco A4500 14yd Swamp Haul Truck.

REAL ESTATE, TRUCKS, TRAILERS, FORKLIFTS, RIGGING EQUIP., ELECTRICAL, SAFETY & SHOP EQUIPMENT 7000 Square Foot Building with Office & Shop on 1.8 Acres in Industrial Park

WW CONSTRUCTORS INC 20095 75TH AVE CORCORAN, MN 55340 SATURDAY, JUNE 5 - 8:00 AM

HEAVY EQUIPMENT, TRUCKS, TRAILERS, VEHICLES, FARM, CONSTRUCTION RELATED ITEMS

UPPER MIDWEST CONTRACTORS CONSIGNMENT AUCTION

9492 BAPTIST CH RD PRINCETON, MN 55371 To view complete auction listings visit our website www.waynepikeauction.com or call 763-389-2700 to request a brochure. On-Line Bidding will be available on all 3 auctions. Register with www.proxibid.com to bid on-line.

AUCTION WAYNE PIKE

Loaders, Dozers & More: Cat 140G Grader, SN:72v1732; Cat 972G RTL, SN:4WW0324; Cat 950F-2, SN:5SK2681, QT Bkt & Forks; Cat 950, SN:81J7623, QT Bkt & Forks; Komatsu WA380; '97 Komatsu WA320H RTL; JD 544B; Michigan L160 RTL, Hough 90E RTL; JD 755 Cr Ldr. Cat D4C, SN:1RJ738; Dresser TD8G; (2) Terex 8230B Dozers; Cat 416C-IT TLB, Xhoe; NH LS180 Skidloader; Reynolds 14C5 Pull Pan; BlawKnox RW95 Road Widener; Galion RP 30/42 Planer; Dynapac CS14 3-W Roller; Raygo 304A 66" Smooth Vib. Roller; Champion 60" Vib. Padfoot; Grove MZ46 Lift; Lots of NEW BilJax Scaffolding & MORE! Aggregate: Pioneer 5x14 3 Deck Wet Screen; Pioneer 3'x25' Fine Material Screen; Simplicity 3x6 3 Deck Screen; CEC 36” Coarse Mtl Washer; Hoover 30”x100' Radial Traveling Staker; Kolberg 24”x80' Radial Conv; 24x60 Stacker; 40' Stacker; (3) 24” & 30” Trans Conveyors; EIW Classifying Tank; Cat 125kw Gen Set & Switch Trailer; 7yd Feed Bin; 70' Truck Scales. Trucks: '91 IH 4800 4x4 Knuckleboom; '87 KW T800 Roll-off Truck; '89 Trail King TK70DGP & '88 Nelson 25LDS Detach Lowboys; '73 Hyster 50t Detach Beam Lowboy; '05 8x20 Cargo Trlr; Sweeper, Mechanics & Other Trucks.

COMPANY, LLC

License 48-01 • Princeton, MN 55371 • 763-389-2700 www.waynepikeauction.com

JLG Awarded $4M Contract to Build EIRVs for U.S. Navy JLG Industries Inc. has received an initial P-3, C-2, E-2 and C-130. It has a horizontal order to build 26 Engine Installation and outreach of 29 ft. (8.8 m) and a vertical Removal Vehicles (EIRV) for the U.S. Navy. extension of up to 41 ft. (12.5 m). The EIRV Valued at approximately $4 million, these has a capacity of 6,000 lb. (2,721 kg); and specially designed JLG vehicles will be in with four-wheel drive and four-wheel steer, the EIRV can maneuver in the most difficult use at naval facilities around the world. “The JLG EIRV is the newest addition to terrain, according to the manufacturer. The EIRV machines will be manufactured a stellar line of combat proven access solutions,” said Denny Buterbaugh, JLG in McConnellsburg, Pa. Industries vice president — government products and programs. “A state-ofthe-art hydraulic system provides the precision necessary for placing and removing engines on a wide variety of aircraft. The JLG vehicle’s extreme terrain ability allows it to be used in almost any environment.” The EIRV is based on JLG telescopic material handler designs and is ideal for placing or removing engines on many com- The EIRV has a horizontal outreach of 29 ft. (8.8 m) and mon aircraft, including the a vertical extension of up to 41 ft. (12.5 m).

Auction Wednesday, May 12, 2010 - 9:30am Dayton, Ohio Note: Tom Topp of ToppShape Ent. has decided to sell his equipment at unreserved auction and take it easy! See details at freyauctions.com Online bidding thru proxibid.com Location: 2120 Ferry Rd, Bellbrook, Ohio south of I-675. Terms: 10% buyer premium on items $2500 and less. Pay in full sale day by guaranteed funds. '02 Moxy Hydrema 912 7yd Mini Artic Rotating Dump. (2) '05 Coyote Fiori DF40 Mini End/Side Dumps (3) Nikken Mini Artic Dumps, Cummins, 3000 kg. '04 Komatsu WA150-5 RTL, SN: 65078, QT GP bkt/forks, 7649 hrs. '06 Komatsu D39EX-21A Dozer, EROPS, 6-way, 2195 hrs. '99 Komatsu D37P-5 Dozer, 6-way. Komatsu PC78MR-68 Mini Exc., Cab, QT, Thumb, Rubber, 2639 hrs. '04 Komatsu PC35MR-2 Mini Exc, Swivel QT, Rubber, 2829 hrs. '99 Komatsu PC27R8 Mini Exc. Bobcat 863C & 863F Skidloaders, Bkt/Forks, Aux hyds. JD 4400 4x4 Tractor, syncreverse, 3pt, PTO. Trencher for Mini Exc. Brillion SL8 Turfmaker & Landpride PS1572 Seeders

Landpride Tiller & Box Blade Harley T8 Power Rake KHB 400 Hyd Hammer. Bobcat Trencher & 72 Sweeper. Pulverizer '03 GMC C4500 Service Truck, Duramax, Crane, Air, Reels, Welder. '98 KW T800 Tdm Tractor, Cummins 350, Wetline. '89 Load King PHD70/90-2 35 Ton Detach. Lowboy. '86 Ford 9000 S/A Dump, Cummins. '05 GMC 2500HD 4dr Pickup, Duramax, Loaded '07 GMC 1500 Pickup, Gas, Long Bed '94 Chevy 3500HD S/A Dump, Diesel. Landoll L2024 10t Tag. '03 Load Max Gooseneck Tilt Deck. Small Support Equip & Misc.

Robert G. Frey, Auctioneer Archbold, Ohio 43502 Phone 419-445-3739 • www.freyandsons.com

Page 60 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABSOLUTE ONE OWNER AUCTION THURSDAY, MAY 13TH, 2010 AT 9:00AM E.D.T. LOCATION: Martin Excavating’s Shop is in Middletown, Ohio between Cincinnati and Dayton, Ohio, approximately 4.5 miles west of I-75 at Exit 32. NOTICE: Greg and Becky Martin, owners of Greg Martin Excavating, Inc., have determined specific equipment to be surplus to their needs entering into the 2010 construction season. Established in 1954, Martin Excavating will continue to offer the finest utility and site development services in Southwest Ohio. Most of this equipment was purchased new by Martin Excavating. Service Records will be available. CRAWLER TRACTORS: 2001 CATERPILLAR D7R XR, SN 2EN01231, EROPS, AC, Differential Steer, 7 SU Dozer w/Tilt, 2 BBL Multi-Shank Ripper, SN 8SH01033, Sweeps, Rear Screen, 24” Pads; CATERPILLAR D3C XL Series III Hystat, SN 4TS00250, OROPS, Joystick Controls, 3P Dozer, Rear Screen, 16” Pads; JOHN DEERE 850C Series I, SN 833678, EROPS, AC, SU Dozer w/Tilt, 24” Pads; JOHN DEERE 850B, SN 781228, OROPS, SU Dozer w/Tilt, 24” Pads; JOHN DEERE 850B Long Track, SN 758995, OROPS, SU Dozer w/Tilt, 24” Pads; JOHN DEERE 750B Long Track, SN 759157, OROPS, SU Dozer w/Tilt, 3 Valves, 2 Remotes, 22” Pads; JOHN DEERE 450C, SN 201855T, OROPS, 6 Way Dozer, Drawbar, PTO, Rear Screen, 16” Pads CRAWLER LOADERS: JOHN DEERE 755, SN 259227, OROPS, GP Bucket w/Teeth, 16” Pads; (2) JOHN DEERE 655B, SN 749684, & SN 791844, OROPS, GP Bucket w/Teeth, 4 Counter Weights, Draw Bar, 20” Double Bar Grouser Pads; CATERPILLAR 963B LGP, SN 9BL01109, OROPS, Heat, 4-in-1 Bucket w/Teeth, 22” Double Bar Grouser Pads HYDRAULIC EXCAVATORS: 2005 KOBELCO SK480LC, SN YS06U0366, 12’ Stick, 36” Hensley Rock Bucket, ACS Hydraulic Quick Coupler, Hydraulic Removable Counter Weight, Remote, 36” Triple Bar Grouser Pads; JOHN DEERE 992E-LC, SN 006259, 13’ Stick, 60” Bucket w/Teeth, Quick Coupler, Hydraulic Removable Counter Weight, 36” Triple Bar Grouser Pads; JOHN DEERE 892E-LC, SN 011395, 15’ Stick, 46” Bucket, JB Hydraulic Quick Coupler, 32” Triple Bar Grouser Pads; JOHN DEERE 790, SN 003925, 9’6” Stick, 36” Bucket w/Teeth, Auxiliary Hydraulics, 32” Triple Bar Grouser Pads; JOHN DEERE 490E, SN 020776, 10’ Stick, 36” Bucket w/Teeth, Auxiliary Hydraulics, 24” Triple Bar Grouser Pads; JOHN DEERE 490, SN 009615. 10’ Stick, 24” Bucket w/Teeth, Auxiliary Hydraulics, 28” Triple Bar Grouser Pads MOTOR SCRAPERS: (2) 2000 TEREX TS14F, SN S7721015, & SN S7721020, EROPS, AC, 29.5R25 Tires; (2) TEREX TS14D II Motor Scraper, SN S7361033. & SN S7361032, EROPS, AC, Cushion Bowl Ride, 29.5R25 Tires MOTOR GRADER: JOHN DEERE 672A, SN 10815T, EROPS, 6 Wheel Drive, 12’ Hydraulic Shift-Tip Moldboard, Front Scarifier, 14.00-R24TG Tires RUBBER TIRED LOADERS: JOHN DEERE 644G, SN 558107, EROPS, AC, GP Bucket, Bolt on Cutting Edge, Quick Coupler, (JRB 6’ Forks - Sold Separate), 23.5-25 Tires; (2) JOHN DEERE 544E Rubber Tired Loader, SN 536497 & SN 522703; EROPS, GP Bucket, Bolt on Cutting Edge, 20.5-25 Tires LOADER BACKHOES: JOHN DEERE 510C 4x4, SN 749315, EROPS; JOHN DEERE 410D Turbo Heavy Lift, 4x4, SN 799617, EROPS, JD Dsl., Extendable Dipper SKIDSTEER: BOBCAT 843, SN 503733497, Auxiliary Hydraulics, 72” Bucket, (Forks Sold Separate), Foam Filled Tires WHEEL TRACTORS: 2007 DEUTZ-FAHR Agrotron 265 4x4, SN 81013176, EROPS, AC, Deutz Dsl., Air Ride Cab, Front 3 Point Hitch, Front PTO, Front 4,500 lb. Counter Weight, Extra Lift, 10,000 lb., 4 Rear Remotes, 2 Power Beyond, Rear Tires, Hour Meter reads 457; JOHN DEERE 8630 4x4, SN 002242R, EROPS, AC, Hydraulic 3 Point Hitch, PTO,3 Rear Remotes, Drawbar, Dual Wheels; JOHN DEERE 8430 4x4, SN 01718R, EROPS, AC, 3 Point Hitch, PTO, 3 Remotes, Drawbar; MASSEY FERGUSON 240 Broom Tractor, SN 2773D5527, OROPS, 3 Point Hitch, PTO, MB 5’ Front Mounted Hydraulic Broom, Hydraulic Angle COMPACTION: CATERPILLAR 815 Compactor, SN 91P0516, OROPS, Hydraulic Leveling Blade; BOMAG BW172 PDB-2 Vibratory Compactor, SN 109520510278, OROPS, 66” Padfoot Drum, Hydraulic Leveling Blade; 2003 BOMAG BW211D-3 Vibratory Roller, SN 101580851051, OROPS, 84” Smooth Drum; DYNAPAC CA151ID Vibratory Roller, SN 598113, OROPS, 66” Smooth Drum; Tow Type Sheepsfoot Roller, (2) 48” Drums, 40” Diameter TRUCKS: 1986 INTERNATIONAL 9300 Tandem Truck Tractor,Cummins Dsl., Roadranger 10 Spd., PTO Blower, Sleeper, Alum. Fuel Tanks, Alcoa Alum. Wheels; 1981 WHITE Road Boss F350 Tandem Truck Tractor, Cummins 350 Dsl., Roadranger 10 Spd., Day Cab, Alum. Fenders; 1976 MACK R686ST Tandem Truck Tractor, Mack Dsl., Roadranger 13 Spd., Alum. Fenders; 1988 FORD L9000 Tandem Dump Truck, Cummins L10 Dsl., Fuller 8LL Transmission, 16’ Steel Bed, Swing Tailgate; 1978 FORD L8000 Tandem Dump Truck, CAT 3208 Turbo Dsl.,

May 5, 2010 – Mixer. Cinco De Mayo Transportation Mixer from 5:00 to 7:00 p.m. at Pujols 5 West Grill; 342 Westport Plaza, St. Louis, MO. AGC St. Louis members and their local Transportation officials are invited to attend. Cost is $10. Transportation officials are asked to register with Kathy Givens at (314)480-3172. For questions contact Leonard Toenjes at (314)781-2356. May 7, 2010 – Luncheon and Fundraiser. A message from The Construction Association of Michigan, The Eight Mile Boulevard Association (8MBA) 11th annual Leadership Luncheon and Fundraiser to be held at 11:00 a.m. to 2:00 p.m. at the Detroit Marriott Renaissance Center. Tickets are available for $250 per person. This will be a rare opportunity to meet several key policy-makers and pay for the event out of corporate funds. Please contact Kevin N. Koehler, Construction Association of Michigan, telephone: (248)972-1000. May 7, 2010 – Tournament. AGC of St. Louis PAC Spring Sporting Clays Tournament. For a full lineup of AGC of St. Louis Events, visit the Programs and Events section of the AGC’s website. May 11, 2010 – Convention. 42nd Annual IAAP Convention at the Springfield Crowne Plaza Hotel, Springfield, IL. You may register by contacting IAAP, 1115 South 2nd Street, Springfield, IL 62704. Fax: (217)2411641. Telephone: (217)241-1639. May 25, 2010 – Golf Outing. AGC of St. Louis PAC Golf Outing. For a full lineup of AGC of St. Louis Events, visit the Programs and Events section of the AGC’s website. June 1-5, 2010 – EXPO. ConExpo Russia 2010, Crocus International Exhibition Center, Moscow, Russia. ConExpo Russia is a new construction exhibition supported by the Russian government, Russian contractor groups, and the manufacturers who exhibit. It is the gathering place of the

Roadranger RT613, Ox 14’ Steel Bed, Pintle Hitch; 2001 KENWORTH T300 Tandem Lube & Fuel Truck, CAT Dsl., Eaton 8 Spd., AC, Air Ride, PTO, Hydraulic Compressor, Taylor Pump, Taylor Lift, Enclosed Bed, 1,000 Gal., Fuel Tank, 250 Gal. Motor Oil Tank, 250 Gal. Hydraulic Oil Tank, 250 Gal. 90 Wt. Oil Tank, 250 Gal. 30 Wt. Oil tank, 200 Gal. Used Oil Tank, 120 lb. Grease Tank, 55 Gal. New AntifreezeTank, 55 Gal. used Antifreeze Tank, (10) Hose Reels, EVAC Used Oil system, Filter Storage Boxes, Alcoa Wheels; 1986 VOLVO N12 Tandem Water Truck, Dsl., 8 Spd., AC, 4,500 Gal. Steel Tank, (3) Front Spray Nozzles, (2) Side Spray Nozzles, (2) Rear Spray Nozzles, Hose Reel, PTO, Double Frame; 1997 CHEVROLET 3500 Cheyenne Flatbed Truck, 12’ Stake Bed, Anthony Lift Gate; 1987 FORD L8000 Flatbed Truck, Ford Dsl., 5x2 Trans., 16W Steel Bed; 2000 GMC 3500 SL 4x4 Utility Truck, AC, Reading Bed, Pipe Rack; 1997 FORD F450 Super Duty Utility Truck, Powerstroke Dsl., AC, IMT Bed, IMT 3016, 6,000 lb., Hydraulic Crane, Miller Legend 225 Amp Gas Welder/Generator, Ingersoll-Rand 30T Gas Compressor, Hydraulic Outriggers, Work Lights; 1988 FORD F450 Super Duty Utility Truck, 5 Spd., Pacemate Body; 1996 CHEVROLET 2500 Silverado Extended Cab Pickup Truck, AC, 8’ Bed, Tool Box; 1995 GMC Sierra 1500, 4x4 Pickup Truck; 1992 CHEVROLET 1500 Silverado Pickup Truck SOIL STABILIZATION EQUIPMENT: 2007 C.U. STOLTZFUS TV3WH18HX Site Spreader Tandem Cement/Lime Spreader, SN M27351006, Cyclone Dust Collector, 8’ Rear Spreader Auger, PTO, Variable Speed Feed Web, Pintle Hitch; 2007 FAE GROUP SSH-200 Hydraulic Soil Stabilizer TRAILERS: 1965 FRUEHAUF Tandem Dry Bulk Tanker, 3 Compartment Steel Tank; 1991 TRAILKING TK70HDG442 35 Ton Tandem Lowboy,102”x22’ Deck, Hydraulic Removable Gooseneck, Gas Engine, Non-Ground Bearing, Outriggers, Fold-up Rear Ramps; 1988 TRANSPORT TRAILER BPX-35F Tandem Lowboy,102”x20’ Deck, Fixed Gooseneck, Outriggers, 5’ Dovetail, Ramps; 1978 BIRMINGHAM 820-TT-R Tandem 20 Ton Tilt Top Equipment Trailer, 20’ Deck, Air Brakes, Dual Wheels; 1978 BIRMINGHAM 822-0W-818-F Tandem 18 Ton Equipment Trailer, 18’ Deck, Air Brakes, Dual Wheels, 5’ Dovetail, Ramps; 1988 TRANSPORT TRAILER TR-10-2 Tandem 10 Ton Equipment Trailer, 19’ Deck, Air Brakes, Dual Wheels, 5’ Dovetail, Pintle Hitch, Ramps; (4) Tandem Storage Van Trailers ATTACHMENTS: (2) REYNOLDS LS16 Finishing Scraper; ROME Bog Disc; LAND PRIDE RCM5015 15’ Rotary Cutter; BOBCAT 18” Fastcut Hydraulic Milling Attachment; LOEGERING 15” Trail Blazers Steel Tracks; 6’ Box Blade; WOODS 6’ Grader Blade; 6’ Grader Blade; 6’ Landscape Rake; 72” CP Hydraulic Excavator Bucket w/Teeth, fits KOBELCO; 56” ACS Hydraulic Excavator Bucket w/Teeth, fits KOBELCO; 48” KOBELCO Hydraulic Excavator Bucket w/Teeth, fits KOBELCO 480; ALLIED 9800 Hydraulic Plate Compactor, fits JD Excavator; Compaction Wheel, fits Excavator; ALLIED 8700C Hydraulic Plate Compactor, fits JD Excavator; 18” BOBCAT Fastcut Hydraulic Milling Attachment, Hydraulic Side Shift, Raise & Lower; 15” LOEGERING Trail Blazers Steel Tracks, fits BOBCAT 843; 6’ Box Blade, Ripper, Teeth, 3 Pt. Hitch TRENCH SHIELDS & MATERIAL BOXES: (2) 8’x16’ KUNDEL Trench Shields; (1) 8’x12’ Manhole Box; 6’x12’ KUNDEL Material

Box; EFFICIENCY 9 Yard Material Box; TITAN Rear Riser System, 10’ AIR COMPRESSORS: LEROI 185CFM Air Compressor, SN 3119X1452, Perkins Dsl., Pintle Hitch, on Rubber; GARDNER DENVER 150CFM Air Compressor, JD Dsl., on Rubber MORTAR MIXERS: STONE 655PM; CON MOR 540; WHITEMAN WC-92P SURVEYING EQUIPMENT: Pipe Laser; Rotating Laser; DAVID WHITE Transit CONDITIONS AND TERMS The condition and description of each item set forth is ONLY A GUIDE, and is in no way a warranty or guarantee, actual or implied. All of the equipment in this Auction is being sold AS-IS, WHERE-IS and with all faults. All conditions and descriptions of equipment in this sale bill are believed to be correct and have been conscientiously set forth by the owners. The equipment is available for public inspection prior to the Auction. COMPLETE PAYMENT DAY OF SALE Certified or Cashiers Check Accepted. If payment is to be made by personal or company check or by wire transfer, you must have a letter from your Bank made to Bunch Brothers Auctioneers. Immediate possession of all equipment on proper settlement. All equipment must be removed from lot by Friday, May 21st, 2010 at 5:00 P.M. INSPECTION: The equipment may be inspected at Auction Site beginning May 7th from 8:00 A.M. to 5:00 P.M. PRE-REGISTER: Wednesday, May 12th SALE SITE PHONE: (513) 727-9300 • SALE SITE FAX: (513) 727-8325 ACCOMMODATIONS Drury Inn Fairfield Inn by Marriott Days Inn Middletown Holiday Inn Express

(513) 425-6650 (513) 424-5444 (513) 420-9378 (513) 727-8440

TRANSPORTATION Greater Cincinnati International Airport is Serviced by most major airlines. Middletown Regional Airport/Hookfield Municipal Airfield for Private Planes (513) 217-4777

For More Information Contact: Martin Excavating: (513) 727-9300, Greg Martin - (513) 465-4752 or Chad Idle - (513) 465-4744 OHIO LIC. NO. 2010000054

Business Calendar construction, utility and forestry industries in Russia and surrounding states, featuring the latest in equipment technologies and education. The Russian construction industry is booming. With continued growth potential and infrastructure projects in the nonresidential construction, forestry and utility industries, companies are looking to the Russian market to expand their enterprise. For more information visit: www.conexporussia.com and email: info@conexporussia.com and phone: (800)867-6060. June 14, July 20, August 18, September 15, 2010 – Golf Outings. The CAM (Construction Association of Michigan) Golf Committee’s 2010 CAM Golf Outing Schedule which features four value-packed outings at remarkable prices include dates June 15 Devil’s Ridge Golf Club - Oxford; July 20 Dunham Hills Golf Club - Harland; August 18 Fieldstone Golf Club - Auburn Hills; September 15 Cherry Creek Golf Club - Shelby Township. For more information and any other questions please contact Diana Brown at 218-972-1000. June 25-26, 2010 – Show. South Carolina Truck Show, Charleston, SC. Home to beautiful beaches and great American history, Charleston, SC will be the site for the South Carolina Truck Show. The event is being held at the Faith Assembly of God Church, 337 Farmington Road, Exit 199 off I-26. All proceeds from this event will go towards missions work at Faith Assembly of God Church. For more information, call 843-376-2418 or email dr.fry@wlcn.tv. July 19-21, 2010 – Workshop. Illinois Association of

Aggregate Producers is hosting a Illinois Teachers Workshop: “Rocks, Minerals & Mining in Today’s Society” at Chestnut Mountain Resort, 8700 West Chestnut Road, Galena, Illinois 61036; telephone: (800) 798-0098. For sign up information or questions, please call: Glenda Schoening or Shawn McKinney (217) 241-1639. DONATION - HELP Support IAAP’s Political Activities – The IAAP Political Action Committee (PAC)was created in order to provide financial support for our allies in the Illinois General Assembly. Whether from Chicago or Downstate Illinois, Democrat or Republican, these legislators all have one thing in common – they support bills that help the Illinois aggregates industry and oppose bills that hurt our interests. As the cost of political campaigns continues to rise, we want to ensure that legislators who support this industry can compete and continue to do good work. For that reason, supporting the IAAP PAC is critically important to the future of our industry, your company, and your Association’s political activities. Please consider sending a donation, payable to the IAAP, to: John Henriksen, Secretary/Treasurer, IAAP PAC, 1115 S. 2nd Street, Springfield, Illinois 62704. INFORMATION - The Transportation for Illinois Coalition (TFIC) has published and electronic version of it’s most recent white paper, an analysis of the 2009 capital program. To download a copy of this document, go to the TFIC website: http://www.tficillinois.org, click on publications and open the file entitled Capital Funding for Transportation. Questions? Please feel free to contact John Henriksen, Illinois Association of Aggregate Producers, 1115 South 2nd Street, Springfield, IL 62704. Office: (217)241-1639. Cell: (217)899-7389. Fax: (217)241-1641.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 61

www.ironplanet.com

Online Auction. Thursday, May 13

110 63 86

AERIAL WORK PLATFORMS

DOZERS

LOADERS

158

44 91 31

BACKHOES

EXCAVATORS

SCRAPERS

27 Aggregate

TRUCKS – ON-ROAD

88 78 53

COMPACTORS

FORKLIFTS

SKID-STEERS

111 On-Road Trailers

74 Asphalt/Paving/Concrete

36 Telescopic Handler

145 Attachments and Parts

41 Trucks – Off-Road

80 Bore/Trench/Drill

47 Water Related Equipment

25 Graders

Auctions you can trust Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.

Go to www.ironplanet.com to view the complete auction schedule, guaranteed inspection reports, and place your bids.

Page 62 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

I.R.A.Y. Shows Off Lots of Equipment in Foley, Minn.

I.R.A.Y. service auction company specializes in heavy equipment auctions and equipment appraisals.

he rain and mud didn’t stop the crowds from attending I.R.A.Y.’s March 5 auction in Foley, Minn. Online bidding for the heavy equipment also was available.

RK Construction of Marcell, Minn., was represented by Dave Kongsjord (L) and Ray Kongsjord, owner. Both were looking at bidding on a side dump and a Cat D6 dozer.

Mary Rahier (L), CFO and Jesse Rahier, owner, both of Mitch Rahier Logging, located in Big Lake, Minn., check out a 1986 Caterpillar 215B with a Hewitt bucket.

Ted Ulrich (L) of Price Gregory, in Houston, Texas, and Roger Swanepoel of AJS Construction in Glenwood City, Wis., are at the I.R.A.Y. auction to check out the equipment prices and hopefully to find a good deal.

Jim Johnson of Bollig and Sons, Hopkins, Minn. checks out a Cat D9 that went for $11,000.

Travis Chilson (L) and Blake Fjosne of Fjosne Construction from Willow River, Minn., bought this Cat D6 dozer for $33,000.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 63

MAJOR PUBLIC EQUIPMENT AUCTION with equipment from THE SHELLY COMPANY & AREA CONTRACTORS & EQUIPMENT DEALERS FRIDAY, MAY 14TH, 9:00 AM 700 HART ROAD COLUMBUS, OHIO 43223 FULL INVENTORY OF EARTHMOVING, SITE DEVELOPMENT & PAVING EQUIPMENT, HEAVY TRUCK TRACTORS, DUMP TRUCKS, TRAILERS & FLEET VEHICLES PARTIAL LISTING: EXCAVATORS: 1995 Cat 325L, s/n 7LM00842; 1994 John Deere 490E, s/n 20982; 1997 Hitachi EX400LC-3, s/n 16A6129; CRAWLER TRACTORS & LOADERS: 2000 Cat D7R, s/n 2EN00704; 1996 Cat D8R, s/n 7XM00478; RUBBER TIRED LOADERS: 2003 Cat 980G II, s/n CAT980GEQWH00713; 1998 Cat 980G, s/n 2KR02600; 1994 Cat 980F, s/n 8CJ01591; 1991 Cat 950F, s/n 7ZF00250; 2002 Komatsu WA500-3LK, s/n A71102; 1993 Komatsu WA700-1, s/n 10080; 1998 Daewoo Mega 250, s/n 1036; 1989 Michigan L70, s/n L70V60693ASH; TRACTOR LOADER BACKHOES: 2002 Cat 420D, s/n JFDP07315; SKID STEERS: 2000 Cat 216, s/n 4NZ00982; 1992 Case 1845, s/n JAF0101844; SKID STEER ATTACHMENTS: 2010 Pallet Forks; 2010 Fork Frame; 2010 60”, 66” & 72” Smooth Bkts; 2010 Stump Bkt; 2010 Versatech Hay Spear; 2010 66” Smooth Bkt Grapple; 2010 Mount Plate; CRUSHING & SCREENING PLANTS & EQUIPMENT: LARGE GENSETS: Kohler 135ROZJ 135 KW Skid Mtd Genset, s/n 611199; PAVING EQUIPMENT & ROAD WIDENERS: 1999 Cat AP1055B, s/n 8BM00388; 2002 Leeboy L8500T, s/n

2788HD, ; 2002 Blaw Knox PF2181, s/n 21810195; 2000 Blaw Knox PF2181, s/n 218101038; 1999 Blaw Knox PF5510, s/n 55102714; 1989 Ingersoll Rand 350S, s/n B4127; 1985 Blaw Know RW100, s/n 1000414; 1985 Blaw Know RW100, s/n 100307; 1983 Blaw Knox RW100, s/n 0980002; ROUGH TERRAIN, TELESCOPIC FORKLIFTS & MANLIFTS: 1999 Lull 844C-42, s/n 99M21P221866; MOTOR GRADERS, MAINTAINERS & MOTOR SCRAPERS: 1995 Cat 143H, s/n 1AL00039; 1995 Huber M850A, s/n M850A02UEM0908; 1987 Athey AB6905, s/n 719A169; TRENCHERS & ROCK SAWS: 1988 Vermeer T650TA, s/n V5JI000211; COMPACTORS & ROLLERS: 2001 Hypac C766C, s/n 109C20902397; 2000 Hypac C776C Roller, s/n 109C20902377; 1999 Hypac C766C, s/n C209C2249V; 1998 Hypac C766C, s/n C209C2250V; 1997 Hypac C340C, s/n C146C3238U; 1995 Hypac C850B, s/n B188S1909S; 1998 Ingersoll Rand DD90HF, s/n 154506; 1993 Cat CP563, s/n 1YJ00347; 1995 Wacker Rider Roller, s/n RD880V673601655; 1992 Dynapac CS12T, s/n 871154; 1992 Hyster C350D, s/n D089C6193L; 1990 Hyster C350D, s/n D089C6185L; 1987 Hamm GRW15 9 Wheel Roller, s/n 1429957; 1993 Bomag BW212D2, s/n 109400870106T; 1965 Galion Chief s/n 42056; RIDGID FRAME & ARTICULATED END DUMPS: 1999 Komatsu HD325-6, s/n 5787; 1999 Euclid R40C, s/n 404TDC76236; GENSETS, COMPRESSORS, PUMPS, WELDERS & LIGHT TOWERS: Gorman Rupp 16C2-F4L 6” Skid Mtd Water Pump, s/n 1160517; BUCKETS & ATTACHMENTS: Cat 2 Barrel, 3 Tooth Ripper For Car D7R; 1999 Allied 785C Hyd Compactor; 1991 Skeleton Bkt; 4’ Q/C Forks For Michigan

L70; 2010 Excalibur X36 Thumb; ASPHALT PLANT COMPONENTS: PLT 66 Hot Mix Surge Silo, Tri-Axle Mtd; TRUCK TRACTORS: 1999 Int’l 4900, Vin 2HSFHAET1XC036236; WATER & TANK TRUCKS: 1994 Ford L9000 , Vin 1FDYW82E1RVA47817; 1993 Int’l 8100, Vin 1HTHBBEN0PH471478; 1993 GMC TC7H042, Vin 1GDS7H4JXPJ512936; 1993 GMC TC7H064, Vin 1GDS7H4J2P1513059; 1990 Int’l 4900 , Vin 1HTSDTVN4LH243368; 1988 GMC 68129, Vin 4GDT9C4C2JV01341; 1985 Int’l Water Truck, Vin 1HTLDTVN6GHA22481; MULTI AXLE & S/A DUMPS: 1995 Chevy C3500, Vin 1GBKC34N8SJ114160; DISTRIBUTOR TRUCKS: 1991 Ford F800, Vin 1FDXK84AOMVA26824; MIXER TRUCKS: 1995 Kenworth W900B Rear Discharge Mixer, McNeilus 11 Yd Mixer, Vin 1NKWLA0X0SS653535; UTILITY, FLATBED & VAN BODY TRUCKS: 1998 Chevy 3500, Vin 1GBKC34F7WF073005; 1995 GMC C7H, Vin 1GDJ7H1P8SJ509904; 1994 GMC Barrel Truck, Vin 1GBKC34F7WF073005; 1991 Chevy Kodiak, Vin 1GBG6H1P7MJ106005; 1991 Int’l 4900 , Vin 1HTSDZ7N5MH317303; 1999 Ford F350XL, Vin 1FDSF34L2XED80500; 1995 GMC 3500, Vin 1GDJC34K0SE537056; 1994 GMC Topkick, Vin 1GDG6H1J0RJ513562; 1984 Int’l 1954, Vin 1HTLDUXP4EHA37336; 2005 GMC 3500, Vin 1GDJC34U95E274295; 1989 Ford L9000, Vin 1FDZY90W3KVA28224; SERVICE, FUEL & LUBE TRUCKS: 1992 GMC Topkick Lube Truck, Vin 1GDM7H1J1NJ525410; 1987 Ford F900 Fuel Truck, Vin

1FDY190A8HVA60545; MECHANICS & WELDERS TRUCKS: 2004 Chevy 2500, Vin 1GBHC24U84E102808; 1999 Chevy 3500, Vin 1GBKC34F4XF036799; TRAILERS: 2000 Fontaine 50 Ton Tri-Axle Lowbed, Vin 4LF4S5239Y3509844; 2000 Etnyre R50TL3 50 Ton Lowbed, Vin 1E9272613YE111169; T/A Equipment Trailer; FLEET VEHICLES: 2002 Chevy 1500, Vin 1GCEC14W42Z248509; 2002 Chevy S10, Vin 1GCCS19W828188226; 2002 Ford F150, Vin 1FTRX1728KC01622; 2001 Ford Ranger, Vin 1FTYR10C91TA29649; 2005 GMC 1500, Vin 1GTEC19X75Z257565; 2005 Chevy Impala, Vin 2G1WF52EX59331852; 2004 Ford F350, Vin 1FDWF36545EA38964; 2004 GMC 1500, Vin 1GTEC14X54Z281949; 2004 Ford Explorer, Vin 1FMZU63K54UB41913; 2003 Ford F250XL, Vin 3FTNX21L93MB26462; 2003 Chevy 1500, Vin 1GCEC14XX3Z304396; 2000 Chevy 1500, Vin 1GCEC14W4YE289478; 1997 Chevy 2500, Vin 1GBGC24R9VZ213823; MESSAGE & ARROW BOARDS: 2006 Allmand 2200ALT Arrow Board, s/n 611460355; Allmand S/A Portable Arrow Board, Parts Only, s/n 0250A-B06; UTILITY & BROOM TRACTORS: 1999 Kubota L4310, s/n 51922; 1998 Massey Ferguson 240, s/n G03395; 1997 Ford 3430, s/n 060792B; 1996 Broce RC300, s/n 87854; SUPPORT EQUIPMENT & TOOLS: 8’x20’ Trench Box w/4” Sides & 3’ Spreaders; (4) 5’ Spreader Bars For Trench Box; (3) 500 Gal Skid Mtd Product Tanks w/Pump & Hose Reel; (2) 2010 Easy Kleen Magnum Gold 4000 PSI 12v Hot Water Pressure Washers, 15 HP Gas, Totally Self Contained; Gang Drill; AND MORE!

MAJOR PUBLIC EQUIPMENT AUCTION with equipment from N. PORCHETTA CONTRACTING CO. OF NJ, INC. & AREA CONTRACTORS & EQUIPMENT DEALERS THURSDAY, MAY 20TH, 9:30 AM 201 WILTON AVE MIDDLESEX, NJ 08846 INVENTORY OF EARTHMOVING, PAVING & MILLING EQUIPMENT, TRUCKS, TRAILERS & FLEET VEHICLES PARTIAL LISTING: EXCAVATORS: 2003 Cat 345BL Series II, s/n CAT0345BLAGS01860; 2004 Cat 330CL, s/n CAT0330CLDDKY02195; 2003 Cat 330CL, s/n CAT0330CCDKY01379; 2003 Cat 330CL, s/n Cat0330CKDKY01377; 2003 Cat 330CL, s/n CAT0330CADKY01384; 2001 Cat 330BL, s/n CAT0330BP6DR04618; 2004 Cat 325CLC, s/n CAT0325CLCRB01040; 2001 Cat 325BL, s/n CAT0325BJ2JR03356; 2004 Cat 322CL, s/n CAT0322CCHEK00378; 2003 Cat 322CL, s/n CAT0322CEHEK00377; 2003 Cat 315CL, s/n CAT0315CJCJC00220; 2005 Cat 307B, s/n 5CW00135; 1993 Komatsu PC300LC-5, s/n A71357; Komatsu PC35, s/n 36002; 2004 Daewoo SL225LC-V, s/n 1398; 2003 Daewoo SL290LC-V, s/n 1477; CRAWLER TRACTORS: 2005 Cat D5G LGP, s/n CAT00D5GJRKG1959; 2003 Cat D5G LGP, s/n CAT00D5GCWGB00733; 2003 Cat D5G XL, s/n CAT00D3GVJMH00613; 2001 Cat D5C Series III LGP, s/n CAT00F5CV6CS1175; 1999 Cat D5C Series III LGP, s/n 6CS00576; 1997 Cat D5C Series III Hystat, s/n 5HS00261; 1988 Cat D8N, s/n 9TC02254; 1983 Cat 963, s/n 11Z00266; 1996 Komatsu D65EX-12, s/n 60933; 1988 Komatsu D31S17, s/n 33249; 1986 Komatsu D31P-17, s/n 34417; RUBBER TIRED LOADERS: 2004 Cat 966G, s/n CAT0966GCANZ00739; 2004 Cat 950G Series II, s/n CAT00950GTBAA00478; 2001 Cat 938G, s/n 4YS01959; 1998 Cat 938G, s/n 6WS00680; 1995 Cat 938F, s/n 1KM1173;

1997 Cat 928G, s/n 6XR00509; TRACTOR LOADER BACKHOES: 2007 Cat 420E IT, s/n CAT0420EVKMW01274; 2005 Cat 420DIT, s/n CAT0420DVBLN12236; 2003 Cat 420D, s/n CAT0420DPFD208297; SKID STEER: 2005 Cat 248B, s/n CAT0248BHSCL01109; PAVEMENT MILLERS: 2006 Cat PM200, s/n CATPM200CP1C00300; 2006 Cat PM102, s/n CATPM102HZ1X00188; PAVING EQUIPMENT: 2001 Cat AP-650B, s/n CATAP650C9DN00471; 1999 Cat AP105B, s/n ABB00194; 2004 Puckett Bros 540, s/n 13350408; 2005 Sealmaster T/A Portable Asphalt Sealer, 215/80R16 Tires, s/n 1S9T5132350420030; CRUSHING & SCREENING PLANTS: 2003 BL Pegson Premiertrak, s/n QM018862; 2002 BL Pegson 1300 Portable, s/n VM016221; 2002 Erin TDL25, s/n 2002540036; COMPACTION EQUIPMENT: 2004 Cat CS-563E, s/n CATCS563PASA00383; 1998 Cat CC563C, s/n 4KN01211; 1997 Cat CS-563C, s/n 4KN00848; 2003 Cat CB-534D, s/n CATCBG534PFGH00198; 2004 Cat CB-224E, s/n CATCB224T24400521; 1997 Cat CP-323C, s/n 6DM00195; 1996 Cat CS-323C, s/n 1EN00120; 2001 Dynapac CA252D, s/n 66221184; 2001 Dynapac CC92, s/n 60610981; 2002 Hypac C840C, s/n 101580371665; 2002 Hypac C788B, s/n 109B21501868; 1999 Hypac C812A, s/n 109A21902065; 1995 Dynapac CC122, s/n 60111472; Dynapac CG15C, s/n 178487; 1986 Beuthling B300, s/n 1567; 2005 Wacker RT82SC, s/n 5577343; 2005 Wacker RT82SC, s/n 5597035; 1998 Wacker RT820, s/n 764401351; 2001 Rammax P33/24HMR, s/n 330851; 1997 Wacker, s/n 750701426; Wacker RT820, s/n 2483; Wacker RT820, s/n 5658675; 1997 Rammax RW-1404MR, s/n 321094; MOTOR SCRAPERS & GRADERS: 1999 Cat 12H, s/n 8MN0683; ROUGH TERRAIN & TELESCOPIC FORKLIFTS: 2004 Cat TH360B, s/n SLE01086; 1981 PCM 610, s/n 176100006; CRANES: 1986 P&H 5000 Knuckleboom Crane, Mtd On Ford 8000 S/A Flatbed Truck, Crane s/n 3003-87, Ford Vin 1FDXR80U8GVA04988; ARTICULATED END DUMPS:

2004 Cat 735, 35 Ton, s/n CAT00735EAWR00750; 2001 Cat 730, s/n CAT00730AAGF00312; 1996 Cat D25D, s/n 1HK00593; 2004 Volvo A40D, s/n A40DV11322; 2004 Volvo A40D, s/n A40DV11321; BUCKETS & ATTACHMENTS: Stanley MB1700 Hammer, s/n 8477; Stanley MB70EX Hammer; TRUCK TRACTORS: 2006 Kenworth T800B TriAxle Tractor, Vin 1XKDPBTX06R124313; 1996 Peterbilt 379 T/A Tractor, Vin 1XP5DB9X9TN397784; TRI, T/A & S/A DUMPS: 2006 Mack CV713 Granite Tri-Axle Dump, Vin 1M2AG11C86M033503; 2006 Mack CV713 Granite Tri-Axle Dump, Vin 112AG11C16M024108; 2005 Mack CV713 Granite Tri-Axle Dump, Vin 1M2AG11C35M025288; 1999 Mack RD688S Tri-Axle Dump, Vin 1M2P324C9YM048831; 1999 Mack RD688S T/A Dump, Vin 1M2P270C8XM044161; 2001 Ford Fl50 S/A Dump, Vin 1FDXF46F91EA58351; DETACHABLE & LOWBED TRAILERS: 2003 Fontaine TH60BSR 60 Ton Tri-Axle Detachable Lowboy Trailer, Vin 13NE5440233517212; 1997 Talbert 73DW-50SA-HRG-1-T1 50 Ton Tri-Axle Detachable Lowboy Trailer, Vin 40FW07837V1014900; 2006 Flip Up 4th Axle, Vin 4LFM0510X63528767; DUMP TRAILERS: 1996 CPS TSD34, 34’ T/A Dump Trailer, Vin 1C9515526TP389016; TAG-ALONG & OTHER H.D. EQUIPMENT TRAILERS: 2005 Towmaster T50 25 Ton Tri-Axle Tag Trailer, Vin 4KNFT24365L160298; 2004 Contrail C10 5 Ton T/A Tag Trailer, Vin 4KNUC16244L161020; 1998 Hudson T/A Tag Trailer, Vin 10HHSE187W1000312; UTILITY, FLATBED & VAN BODY TRUCKS: 1999 Ford F450, Vin 1FDXF46F3XEE42540; 1994 GMC 3500, Vin 1GDKC34KXRJ524577; Am General 6x6 (Military) Flatbed, Vin 05A33971C12210030; SERVICE, WATER, FUEL & LUBE TRUCKS: 2003 Peterbilt 330 Service Truck, Vin 2NPNHD6H93M809984; 1999 Freightliner Fl70 Water Truck, Vin 1FV6HFAA6XHB27948; 2004 Kenworth T300 Lube Truck, Vin 2NKMHD7X14M064303; MECHANIC TRUCKS: 2003 Ford F450 XL, Vin 1FDXF46F93EA41228;

2000 Ford F650 XLT, Vin 3FDNF65A4YMA73126; 1996 Ford F350 XL, Vin 2FTHF36F7TCA51684; FLEET VEHICLES: 2006 Ford F350 XL, Vin 1FTWW30PX6EB04076; 2005 Ford F350 XL, Vin 1FTWW31555ED00759; 2005 Ford F150 XL, Vin 1FTVX14545NA39567; 2005 GMC Denali, Vin 1GKF66UX5J139396l; 2005 Ford Expedition, Vin 1FMFU1815LA5194; 2004 GMC Denali, Vin 1GKEK63U34J308608; 2004 Ford F250, Vin 1FTNX21L64EC02047; 2004 Ford F250, Vin 1FTNF21LX4ED55999; 2004 Chevy 1500 LS, Vin 2GCEK19V441135884; 2004 Ford F150, Vin KF13595; 2003 Ford F250 XLT, Vin 3FTNF21L43MB21186; 2003 Ford F150, Vin 1FTRW08LX3KC47166; 2003 Chevy 1500, Vin 1GCEK14U23Z123245; 2003 Chevrolet 1500, Vin 1GCEK14V23Z123245; 2001 Ford Excursion XLT, Vin 1FMSU41FS1ED29865; 2000 Ford F250 XLT, Vin 1FTNX21F1YEA58469; 1997 GMC 2500SL, Vin 1GTGK24P7VE550173; 1997 Ford Explorer, Vin 1FNDU34E9VUC07382; 1994 Jeep Wrangler, Vin 21J4FY19PXRP411672; 1989 Chevy 2500 Silverado, Vin 1GCGK24K2KE19068; GENERATORS: 2001 Multiquip 70KW, s/n 7302974; 2000 Multiquip DCA25SSIU, s/n 7104077; 1999 Multiquip DCA25SSIU, s/n 7102696; 1998 Coleman CJ4T60S0 60KW, s/n 6983010; COMPRESSORS: 1998 Sullivan D185Q6CA, s/n 1823A; LIGHT TOWERS: 2003 Amida AL4050D-4MH, s/n 0304-78647; 2000 Amida AL4060D-4MH, s/n 0001-61786; 1997 Amida AL4050D4MH, s/n 9707-42308; 1999 Amida AL4060D-4MH, s/n 9902-53454; 1997 Ingersoll R& L6-4MH Portable, s/n 273100UBH823; PUMPS: 2003 Godwin CDL50 6” Portable Centrifugal Pump, s/n 0229389-34; SUPPORT EQUIPMENT: 2000 Multiquip/Whiteman WC-62P Concrete Mixer, s/n HL-751813; Multiquip/Whiteman WC-92P Concrete Mixer, s/n FB-752556; AND MORE!

QUALITY CONSIGNMENTS ARE NOW BEING ACCEPTED FOR ALL SALES TERMS: Complete payment day of sale in Cash, Certified or Guaranteed Funds. Ohio Lic# 200200176, Ohio Firm #200200177

ONLINE BIDDING THROUGH EQUIPMENTFACTS.COM

CALL FOR INFORMATION AND PICTURE BROCHURES. Salt Lake City, UT (801) 355-4500 Wharton, NJ (973) 659-3330 Milford, NH (603) 672-4100

Columbus, OH (614) 444-4300 Providence, RI (401) 455-0200 Boston, MA (617) 427-8888

275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900 www.petrowskyauctioneers.com

Page 64 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RENTAL FLEET AUCTION AERIALS, CRANES, CONSTRUCTION, FORKLIFTS, SUPPORT EQUIPMENT SATURDAY, MAY 15 @ 9:30 AM DES MOINES, IOWA DIRECTIONS: From North: I-35 to I-235 West, 1-235 West to East 6th Ave. Take East 6th Ave., go south approx. 1 mile then turn right on Scott St. and go 4 blocks west to 1405 SE 1st. From South and West: I-35/I-80 to I-235 East, I-235 East to East 6th Ave. Go South Approx. 1 mile then turn, right on Scott St. and go 4 blocks west to 1405 SE 1st. Address: 1405 SE 1st Des Moines, Iowa 50315. (Eco Tech’s yard.) NOTE: Selling in this sale will be late & great cranes, aerials, forklifts, plus a fill line construction equipment. HILITES: 2 ROUGH TERRAIN CRANES: 2008 Terex RT780 (80T), New 2009 Terex RT555 (55T), 2 TRUCK CRANES: P&H T900XL (100 ton), Linkbelt HTC50W 50ton, HYDRAULIC EXCAVATORS: Bobcat 334, HYDRAULIC SCAFFOLD SYSTEM: Hydro Mobile Mast Climbing Scaffold, MZK2 Paver Unit, (3) M-1 Hydro Mobile Power Unit, (17) Bridges: (2ft.-20ft.), RUBBER TIRED LOADERS: Komatsu WA380, 4 TELESCOPIC FORKLIFTS: 2002 Skytrak 10054 Legacy, 2004 Skytrak 8042 Legacy, 2000-1998 Skytrak 8042 Legacy, FORKLIFTS: 2007 Mitsubishi FGC25NQI 5,000lb., 3 BOOM LIFTS: (2) 2002 JLG 660SJ (generators), JLG E330AJ, RUBBER TRACKED SKID STEERS: 2002 Bobcat T200, LASER EQUIPMENT: Top Con Control System, SURVEY EQUIPMENT: David White Transit, CONCRETE PUMP: Mayco ST30, TRENCH BOX ACCESSORIES: 7ft. Ladder Spreader w/ Mud Shields, ATTACHMENTS: Excavators: New 5600-4800-3500 thumbs, New Super Cut Asphalt Cutters, New Grizzly Thumbs, Backhoes: Stanley Hammer, Skid Steers: New Hay Spears, Grapples, New TRX 4000 48in. Forks, Tree Booms, Buckets, Fork Frames, Stump Buckets, Backhoe, Tree Boom., Tree Shear, SUPPORT EQUIPMENT: Culvert Pipes, 10in. Inflatable Sewer Plug . SALE SITE PHONE: (863) 602-8292 Everything sells “AS IS,” “WHERE IS,” everything sells to the highest bidder without minimums or reserve.

Visit us on the Internet at www.lyonauction.com The Complete Auction And Appraisal Service

ALEX LY N & SON CEG_Columbus_5.25x10.625.indd 1

4/19/2010 4:44:19 PM

SALES MANAGERS & AUCTIONEERS, INC.

Bridgeport, NY 315/633-2944, Fax: 315/633-8010 • Syracuse, NY (Evenings) 315/637-8912 • www.lyonauction.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 65

ONE OWNER PARTIAL LIQUIDATION ABSOLUTE AUCTION CONSTRUCTION EQUIPMENT - TRUCKS & TRAILERS ABC PAVING COMPANY 2650 VAN HORN ROAD • TRENTON, MI 48183 Thursday, May 20, 2010 – 10:00AM

Surf the Internet to the News, Equipment and all the information you need to keep up with the Construction industry @

PRELIMINARY EQUIPMENT LIST RUBBER TIRED LOADERS: (3) 1999 CAT 950G; (2) SAMSUNG SL150-2; SKID STEER LOADERS: 2005 CAT 226B; 2000 CAT 226; EXCAVATOR: CAT 320CL; LOADER BACKHOES: 2001 CAT 420D; CAT 416 C4X; CASE 580SL; CASE 580E; CRAWLER TRACTORS: 2004 CAT D5N LGP; 2001 CAT D5C XL; 2001 CAT D5C; 2001 CAT D5C XL III; CAT D5C XL III HYSTAT; CAT D5C III; 2004 CAT D4G XL; MOTOR GRADERS: 2000 CAT 140H; CAT 12H; SINGLE DRUM VIBRATORY ROLLERS: (2) DYNAPAC 251D; DYNAPAC CA251D 25 SERIES; IR SD-70D; SINGLE DRUM PADFOOT COMPACTOR: HAMM 2420; TANDEM ROLLER: 2000 ROSCO DELUXE III; TAR KETTLE: 2001 LEEBOY 250T; FUEL & LUBE TRUCK: 1984 FORD 8000; FLATBED

www.constructionequipmentguide.com

TRUCK: 1994 GMC TOP KICK; TRUCKS/SUVS: 2005 JEEP LAREDO GRAND CHEROKEE; 2000 FORD EXPLORER XLS; 1998 FORD F150 XLT; 1998 FORD F150; 1997 FORD F250 4X4 XLT; 1997 FORD EXPEDITION; 1995 FORD F150; TRAILERS: 2002 TOW MASTER T20; 1990 ETNYRE 20 TON TILT TOP TAG; 1980 HYSTER 35 TON LOWBOY; MISC. Bid. Online bidding is provided by RealtimeB Visit their website at www.realtimebid.com for more information and to BID ONLINE! Note: There is an additional 2% buyer’s premium for online bidders. Terms: Payment in full on Sale Day by Cash, Cashier’s Check or Certified Checks. Personal and Company Checks MUST have bank letter of guarantee. Note: There is a two (2%) percent buyer’s premium. Additional terms can be found in the sale day catalog.

Sale Conducted By:

1670 Commerce Road Holland, Ohio 43528

Phone: 419-865-3990 Fax: 419-865-4595 www.yoderandfrey.com • email: info@yoderandfrey.com

FRIDAY, MAY 21ST • 8AM 14152 Hwy 9 • Lime Springs, IA Accepting Consignments until Noon on Saturday, May 15th

The “It’s Only Another Beer” Black and Tan 8 oz. pilsner lager 8 oz. stout lager 1 frosty mug 1 icy road 1 pick-up truck 1 10-hour day 1 tired worker A few rounds with the guys Mix ingredients. Add 1 totalled vehicle. Never underestimate ‘just a few.’ Buzzed driving is drunk driving.

Now Accepting for IA & MN: Excavators, Dozers, Loaders, Semis, Trucks, Trailers and Related Equipment

FRIDAY, JUNE 4TH • 8AM 11935 Hwy 95 NE • Foley, MN Accepting Consignments until Noon on Saturday, May 29th

TO CONSIGN AT OUR AUCTION OR SCHEDULE YOUR OWN CALL: (877) OR (320) 968-7230

See It • Bid on It • Buy It • www.iraymn.com Col. Raymond S. Henry – WI Lic.#2490-52; MN Lic.#05-10-005 Real Estate Auctioneer & GPPA Certified Equipment Appraiser

Page 66 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX LYON & SON INC DES MOINES IA ...............................................................................64 ALEX PARIS CONTRACTING CO INC .....................................................9 ALL ERECTION & CRANE RENTALS.....................................................20 ALLU GROUP ..........................................................................................19 AMERICAN STATE EQUIPMENT............................................................11 ARTIC SNOW & ICE CONTROL .............................................................23 BARGAINS...............................................................................................53 BODINE MFG ..........................................................................................23 BRANDEIS...............................................................................................23 BREAKER TECHNOLOGIES ..................................................................47 BUNCH BROS AUCTION CO MIDDLETOWN OHIO .......................................................................60 CAT AUCTION SERVICES TWIN CITIES / DES MOINES, IA .....................................................57 CEG SCALE MODELS ............................................................................22 CHAMPION MOTOR GRADERS.............................................................24 CK POWER..............................................................................................23 CLASSIFIEDS.....................................................................................54,55 CONSTRUCTION EQUIPMENT GUIDE - WANTED ..............................56 CONSTRUCTION MACHINERY CORP ..................................................16 CUSTOM MADE PRODUCTS .................................................................21 DAKOTA AG INNOVATIONS ...................................................................65 DOOSAN INFRACORE AMERICA CORP...............................................25 DOOSAN PORTABLE POWER ...............................................................31 DURATECH .............................................................................................43 DYNAPAC ................................................................................................32 FABCO EQUIPMENT INC .........................................................................7 FARM-RITE EQUIPMENT INC ..................................................................8 FELLING TRAILERS................................................................................51 FINKBINER EQUIPMENT CO .................................................................11 FREY & SONS INC ARCHBOLD OHIO / DAYTON OH....................................................59 GARY CARLSON EQUIPMENT ..............................................................10 GEITH INC ...............................................................................................47 HARTS TRACTOR & EQUIPMENT CO ..................................................35 HOWELL TRACTOR & EQUIPMENT CO ..........................................33,68 ILLINOIS TRUCK & EQUIPMENT .............................................................3 INDECO NORTH AMERICA ....................................................................41 IRAY AUCTION LIME SPRINGS IA ............................................................................65 IROCK CRUSHERS.................................................................................46 IRON PLANET ONLINE AUCTION............................................................................61

JJ SCHECKEL CORP..............................................................................20 JOHN DEERE ..........................................................................................28 KAWASAKI CONSTRUCTION MACHINERY ..........................................30 KOMATSU AMERICA CORP ...................................................................26 KUBOTA...................................................................................................24 LUBY EQUIPMENT SERVICES ..............................................................21 MCALLISTER EQUIPMENT CO..............................................................45 MCCANN INDUSTRIES INC .....................................................................6 METSO MINERALS .................................................................................45 MID COUNTRY MACHINERY .................................................................34 MIDLAND EQUIPMENT CO ....................................................................50 MUSTANG MFG ......................................................................................29 NITKE SALES INC WAUSAU WI .....................................................................................65 PATTEN TRACTOR & EQUIPMENT CO..............................................2,21 PETROWSKY AUCTIONEERS INC COLUMBUS OH / MIDDLESEX NJ..................................................63 POWERSCREEN MW DEALER..............................................................39 RDO EQUIPMENT/SCHARBER EQUIPMENT .......................................15 REDI-HAUL TRAILERS INC ....................................................................50 REMU SCREENING TECHNOLOGY ......................................................43 RITCHIE BROS. AUCTIONEERS COLUMBUS OHIO ...........................................................................64 ROCKFORD / CHICAGO..................................................................67 ROAD BUILDERS MACHINERY ..........................................................6,13 ROCKLAND MFG CO..............................................................................19 ROLAND MACHINERY INC ......................................................................5 RUDD EQUIPMENT CO ..........................................................................17 SCHAEFER ENTERPRISES ...................................................................33 SCREEN USA..........................................................................................37 STAR EQUIPMENT LTD............................................................................6 TOWMASTER INC..................................................................................52 WAYNE PIKE AUCTION COMPANY, LLC SLAYTON MN / CORCORAN MN / PRINCETON MN .....................59 WHAYNE SUPPLY CO ............................................................................33 YODER & FREY AUCTIONEERS TRENTON MI....................................................................................65

OHIO STATE SUPPLEMENT BOBCAT ENTERPRISES ..........................................................................3 GIBSON MACHINERY LLC .......................................................................5 NORTRAX-MIDWEST................................................................................8 RUDD EQUIPMENT CO ............................................................................1 THE MCLEAN CO .....................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • May 1, 2010 • Page 67

UNRESERVED PUBLIC AUCTION

Rockford

Chicago

Illinois

Illinios

UNUSED– BAKER KURTZ 4652 URBAN PRIMARY

4– 2006 CHALLENGER MT865B

22 — WHEEL LOADERS

2006 JOHN DEERE 844J

TEREX T340 40 TON & TEREX T335 35 TON

Wednesday, May 12, 2010 8:00 am

Thursday, May 13, 2010 8:00 am

Auction Location: 8966 E State St, Rockford, IL 61108 Fax: 815.942.8053

Auction Site: 2400 Ritchie Road, Morris, IL 60450 Fax: 815.942.8053

Auction Firm License # 444.000193 / Auctioneer: Greg S. Fuqua #441.000843

Auction Firm License # 444.000193 / Auctioneer: John L. Korrey #441.001097

CALL FOR A FREE BROCHURE

000.000.0000 815.941.6400 For equipment listings and photographs, visit our web site at rbauction.com

CALL FOR A FREE BROCHURE

000.000.0000 000. 000.0000 815.941.6400

Page 68 • May 1, 2010 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE