Four Corners 24, November 19, 2023 by Construction Equipment Guide

FOUR CORNERS STATES EDITION

November 19 2023 Vol. I • No. 24

“The Nation’s Best Read Construction Newspaper… Founded in 1957.” Your Four Corners Connection • Dennis Hogeboom • 1-877-877-4997 • dennishogeboom@cegltd.com

4Rivers Acquires Honnen Locations, Expands in Colorado

(L-R) are Ryan Nielsen, branch manager, Frederick, Colo.; Larry Rutz, CEO; Hannah Ross, marketing manager; John Shearer, CEO; Mark Honnen, CEO of Honnen; Lori Snider, HR director; and Danny Bratton, general manager of construction and forestry.

4Rivers Equipment is set to expand its service in the Colorado region, as it enters into agreement for the acquisition of three Honnen Equipment locations in Commerce City, Grand Junction and Durango. With this move, 4Rivers Equipment reinforces its commitment to delivering top-tier John Deere services to customers across the state, while further solidifying its position as a leading John Deere construction equipment dealer. The acquisition unites two companies with

deep-rooted legacies in Colorado. 4Rivers Equipment has a storied history tracing back to 1926 in Holly, Colo., while Honnen Equipment has been an integral part of the Denver community and western Colorado since 1963. Additionally, this acquisition is expected to fuel greater innovation and resourcefulness, enabling an even more comprehensive response to the evolving demands of the industry. see EXPANDS page 9

4Rivers Equipment is expanding in Colorado with the acquisition of three Honnen Equipment locations in Commerce City, Grand Junction and Durango. RDO Equipment Co. also purchased eight Honnen Equipment locations in Utah, Wyoming and Idaho. Coverage on page 9.

Specializing in New, Used & Rebuilt Replacement Parts Utah Track & Welding Service & Sales

• Track Repair • Undercarriage Parts We Buy Salvage • Equipment Sales • Attachments Equipment • New and Used Parts • Hydraulic Cylinder Repair Alternative to the dealer • Teeth & Edges • Field Service for all makes & models • Full Service Shop

6382 West 2100 South, Salt Lake City, Utah 84128 • (801) 972-8939 • www.utahtrackandwelding.com • sam@utahtrackandwelding.com

Page 2 • November 19, 2023 • www.constructionequipmentguide.com • Four Corners States Supplement • Construction Equipment Guide

HELPING YOU WIN A AT T

KING OF THE THE CASE TV620B The CASE TV620B is the strongest compact track loader ever built. And it’s just the start. We’ve got the machin ne for any kind of job, big or small. Check out our entire com mpact track loader lineup at CaseCE.com or talk to your dealerr.. UT TA AH

SALLTT L AK E CIT Y 4343 Centur y Dr. Salt Lake Cit y, U T 84123 Phone: 801-262-5761

LOGAN 453 N 1000 West L o g a n, U T 8 4 3 2 1 Phone: 435-752-1533

NEW MEXICO

COLORADO

ALBUQUERQUE 6301 Edith Blvd. NE. Albuquerque, NM 87107 Phone: 505-433-2246

DUR ANGO 1097 Hw y 3 Durango, CO 81301 Phone: 970-247-0522

SPRINGVILLE 1350 S. 2000 West Springville, U T 84663 Phone: 801-794-1463 CLIF TON 5 4 9 3 2 n d R d. Clif ton, CO 81520 Phone: 970-434-7363

CED DAR CIT Y 482 N. Main St. Cedar Cit y, U T 84720 Phone: 435-586-4 406

©2023 Century Equipment Company. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V.,. its subsidiaries or afﬁliates.

Construction Equipment Guide • Four Corners States Supplement • www.constructionequipmentguide.com • November 19, 2023 • Page 3

COLORADO

Corporate Ofﬁce 5000 Vasquez Blvd. Denver, CO 80216 303.355.5900 Grand Junction 970-241-1550 Colorado Springs 719.576.5541 Milliken 970.587.1188 Durango 970.259.0455

WYOMING

TEXAS

Cheyenne 307.634.5149

El Paso 915.872.1001

NEW MEXICO

ARIZONA

Albuquerque 505.345.8383 Bloomﬁeld 505.324.8601 Carlsbad 505.485.1700

Chandler 602.463.3772 Phoenix 602.986.3003 Tucson 520.649.2858

Watch for New Branches Opening Soon! *some representation varies by state

Page 4 • November 19, 2023 • www.constructionequipmentguide.com • Four Corners States Supplement • Construction Equipment Guide

Texas Instruments Commences Construction in Utah Texas Instruments (TI) recently broke ground on said Alpine School District Superintendent, Dr. Shane Farnsworth. “Working together with the city its new 300-mm semiconductor wafer fabrication of Lehi, Texas Instruments, and our schools, this colplant in Lehi, Utah. Joined by Utah Gov. Spencer laborative investment will impact students and their Cox, state and local elected officials, as well as comfamilies for many generations to come.” munity leaders, TI President and CEO Haviv Ilan celebrated the first steps toward construction of the Building Sustainably new fab, LFAB2, which will connect to the compaTI has a long-standing commitment to responsible, ny’s existing 300-mm wafer fab in Lehi. Once comsustainable manufacturing. LFAB2 will be one of the pleted, TI’s two Utah fabs will manufacture tens of company’s most environmentally efficient wafer millions of analog and embedded processing chips fabs, designed to meet one of the Leadership in every day at full production. Energy and Environmental Design (LEED) building “Today we take an important step in our comparating system’s highest levels of structural efficiency ny’s journey to expand our manufacturing footprint and sustainability: LEED Gold version 4. in Utah,” said Ilan. “This new fab is part of our longLFAB2 has a goal to be powered by 100 percent term, 300-mm manufacturing roadmap to build the renewable electricity and advanced 300-mm equipcapacity our customers will need for decades to ment and processes in Lehi will further reduce waste, come. At TI, our passion is to create a better world by Joined by Utah Gov. Spencer Cox, state and local elected officials, as water and energy consumption. LFAB2 is expected making electronics more affordable through semi- well as community leaders, TI President, CEO Haviv Ilan celebrated to recycle water at nearly twice the rate of TI’s existconductors. We are proud to be a growing member of the first steps toward construction of the new fab, LFAB2. ing fab in Lehi. the Utah community, and to manufacture analog and Building Stronger Communities embedded processing semiconductors that are vital for nearBuilding Next Era of As part of TI’s commitment to education, the company ly every type of electronic system today.” Semiconductor Manufacturing will invest $9 million dollars in the Alpine School District to In February, TI announced its $11 billion investment in develop the state’s first Science, Technology, Engineering LFAB2 will complement TI’s existing 300-mm wafer Utah, marking the largest economic investment in state his- and Math (STEM) learning community for all students in fabs, which include LFAB1 (Lehi, Utah), DMOS6 (Dallas), tory. LFAB2 will create approximately 800 additional TI kindergarten through 12th grade. The multiyear program and RFAB1 and RFAB2 (both in Richardson, Texas). TI also jobs, as well as thousands of indirect jobs, with first produc- will embed STEM concepts more deeply into coursework is building four new 300-mm wafer fabs in Sherman, Texas, tion available as early as 2026. for the district’s 85,000 students and provide STEM-oriented (SM1, SM2, SM3 and SM4), with production from the first “TI’s growing manufacturing presence in Utah will be professional development for its teachers and administrators. fab as early as 2025. TI’s manufacturing expansions, with anticipated support transformative for our state, creating hundreds of good-pay- The district-wide program will equip students with essential ing jobs for Utahns to manufacture critically important tech- STEM skills, such as critical thinking, collaboration and cre- from the CHIPS and Science Act, will provide reliable supply of analog and embedded processing products. These nology,” said Cox. “We are proud that semiconductors — ative problem-solving to succeed after graduation. “We are excited this partnership will help our students investments in manufacturing and technology illustrate the made in Utah by Utahns — will power the innovation that is foundational to our country's economic and national securi- develop essential knowledge and skills, preparing them for company's commitment to long-term capacity planning.  (Photo courtesy of Texas Instruments.) success in life and possible careers in the technology sector,” ty.”

John Deere Names 4Rivers Technician Territory Champ Dallas Thompson has been a diesel technician at 4Rivers Equipment for the last 25 years. In that time, he has made an impact as a positive leader in the shop and in the field, leading him to be recognized by John Deere as a territory champion. The John Deere Technicians Award Program recognizes those who epitomize what it means to be “John Deere” and honors commitment to the brand. Beyond that, the award program acknowledges those who are of extraordinary service to their community. “It is a great honor that Deere recognizes me because I have worked with John Deere equipment for 25 years,” Thompson said. “I’m incredibly proud to have a 4Rivers technician make it to territory champion once again,” 4Rivers Equipment CEO John Shearer said. “Dallas is an amazing example of living our mission and vision statements on a daily basis. His friendly and upbeat attitude and technical expertise is a big part of the Colorado Springs store’s success. In addition to what Dallas does at the store, he also spends his free time helping on various

veterans’ organization. I am very proud to have Dallas on our team.” As a level IV technician, Thompson has plenty of accomplishments in the workplace, but it is his work with the Combat Veterans Motorcycle Association (CVMA) that truly sets him apart. The CVMA is an association of combat veterans who support veteran care facilities by providing warm meals, clothing, shelter and guidance to other combat veterans. Thompson serves as the commander of Chapter 3/5. “It is vets helping vets. Every year we have a poker run and donate the proceeds to Veterans Community Living Center at Homelake in Monte Vista, Colorado,” Thompson said. “During Christmas, we go down and lay wreaths at the cemetery and then go hang out with the veterans. There have been times in the summer where we go down there for no reason, just to hang out with them, give them some gifts and make them feel loved and wanted in the community.”

4Rivers photo

Dallas Thompson

Thompson carries the same spirit of giving to the shop by being a role model to other technicians, using his leadership and knowledge to build their skillsets. “My team here in Colorado Springs is my motivation because I know I can get them on the right track and I can make them better technicians,” Thompson said. “I have learned how to motivate other techs and help

them find the answer they are looking for.” Thompson’s lifelong passion for mechanics began during his early years, fostered by his military service as a self-propelled systems mechanic. His enthusiasm for repairing and revitalizing equipment remains a driving force in his professional and personal life. “Since I was young, I always liked tinkering around with stuff and if it was broke, I tried to bring it back to life,” Thompson said. “The reason being it always enthused me and made me feel good to make it work again. When I turned 20, I had joined the army and I wanted to be a tank mechanic. I ended up being with the field artillery and I was a self-propelled systems mechanic. I just loved doing it, that is what sparked the interest. Fixing stuff that was broke and trying to bring it back to life excites me.” Thompson thanked Colorado Springs Branch Manager Nick Kout and Service Manager Rich Jeanblanc for nominating him for this award. For more information, visit www.4RiversEquipment.com. 

Construction Equipment Guide • Four Corners States Supplement • www.constructionequipmentguide.com • November 19, 2023 • Page 5

Jacobsen Construction Celebrates Topping Out in Utah

A group of approximately 600 construction workers gathered in Salt Lake City to celebrate a topping out ceremony for Astra Tower, a 41-floor structure that will represent the tallest building in Utah ever built.

Designed by global design firm HKS, Astra Tower now stands more than 450 ft. tall and redefines Salt Lake’s urban skyline.

By Lori Tobias CEG CORRESPONDENT

Utah’s busy construction industry was on full display in October as an audience of approximately 600 people, most of them construction workers, turned out to celebrate the placement of the final beam on Salt Lake City’s tallest building, the new 41-floor Astra Tower. Construction crews were joined by a list of dignitaries, including two mayors and numerous project leaders from Jacobsen Construction and Kensington Investment Company. “Salt Lake City’s growing skyline is a testament to the excitement and vitality surrounding our urban core right now,” Salt Lake City Mayor Erin Mendenhall said. “Astra Tower will serve as a hub of activity downtown, creating an opportunity for its residents to enjoy all we have to offer. As it takes its place as the tallest building ever built in Utah, I also believe it’s representative of our bright future ahead.” The first above grade concrete was poured in early 2023. Since then, the high rise has progressed upward on an average of a full level every seven days, with an average of 365 workers on the jobsite daily and more than 45 subcontractors and vendors contributing to the project. Designed by global design firm HKS, Astra Tower now stands more than 450 ft. tall and re-defines Salt Lake’s urban skyline,

The large majority of construction teams at Astra Tower are Utah-based, making the project a fresh showcase of Utah builders’ growing capacity to complete complex high-rise work.

according to Jacobsen Construction. “The Astra Tower isn’t just another construction project,” said Salt Lake County Mayor Jenny Wilson. “It’s a testament to Jacobsen Construction, Kensington Investment Company and Salt Lake County’s commitment to driving economic growth, fostering cultural enrichment and designing forward-looking communities.” The large majority of construction teams at Astra Tower are Utah-based, making the project a fresh showcase of Utah builders’ growing capacity to complete complex highrise work at taller-than-ever heights. This locally based and specially qualified workforce guided Astra Tower to a rapid ascension from ground level, despite the many logistical complexities of operating on a jobsite with a tight downtown footprint,

The Astra Tower project team is seeking LEED Gold certification by building according to strict sustainability standards that minimize carbon footprint and address pressing environmental issues specific to northern Utah, particularly air quality and water conservation.

Lockhart said. In videotaped comments, Utah Gov. Spencer Cox said achievements like the tower show that the state “continues to be the best place in America to build on a bold vision” and reflects well on the “economic vibrancy of our communities.” “With the hi-rise having recently reached its full stature, I want to congratulate the whole project team for literally taking our state to new heights,” Cox said. “I look forward to seeing Astra Tower take its place among the most iconic structures in our Capital city skyline as the project moves forward toward final completion over the coming months.” The Astra Tower project team is seeking LEED Gold certification by building according to strict sustainability standards that minimize carbon footprint and address pressing environmental issues specific to northern Utah, particularly air quality and water conservation. “We’re building for the future, not just for right now,” said Shane Rensmon, president of real estate development of Kensington Investment Company. “Knowing that water shortages and air quality are challenges here, we want to help the natural environment surrounding Astra Tower rather than burdening it.” Astra Tower’s luxury apartments will include studios, one-, two-, and three-bedroom floorplans and two levels of exclusive penthouse units. Amenities will include an

outdoor urban park, a clubhouse with chef kitchen, a work lounge with conference rooms, a full-service fitness center with a multipurpose studio, an outdoor pool and terrace, a spa and wellness center and a large 41st floor rooftop terrace. “Astra Tower will revolutionize urban living in Salt Lake City by creating a unique, sustainable and urban community,” said Emir Tursic HKS Principal and Architect. “Residents will receive extensive indoor and outdoor amenities while being within walking distance of the best experiences the city has to offer.” The building is expected to be completed in the fall of 2024.  CEG (All photos courtesy of Jacobsen Construction.)

The first above grade concrete was poured in early 2023. Since then, the high rise has progressed upward on an average of a full level every seven days, with an average of 365 workers on the jobsite daily and more than 45 subcontractors and vendors contributing to the project.

Page 6 • November 19, 2023 • www.constructionequipmentguide.com • Four Corners States Supplement • Construction Equipment Guide

Construction Equipment Guide • Four Corners States Supplement • www.constructionequipmentguide.com • November 19, 2023 • Page 7

Page 8 • November 19, 2023 • www.constructionequipmentguide.com • Four Corners States Supplement • Construction Equipment Guide

CDOT Cuts Ribbon On New Traffic Operations Center Coloradans experienced its first taste of snow in October, officially marking the start of the winter driving season. This year, the Colorado Department of Transportation is adding more to its arsenal to help keep traffic moving and travelers safe, especially along the Interstate 70 Mountain Corridor, by opening a new, updated Operations Center at the Eisenhower Johnson Memorial Tunnels and maintenance garage bays. “We are now approaching an almost $2 million hit to the economy for every hour the I-70 Mountain Corridor is closed,” said Shoshana Lew, CDOT’s executive director. “Not only do closures delay important deliveries and transportation of goods, it also has a real impact on the livelihood of our travelers, which cannot be summed up by a figure. It is important to CDOT to do everything we can to alleviate those impacts and ensure a quick clearance of incidents along the interstate, which is why we invested in updating our technology at the Operations Center and constructing a new maintenance facility at the Eisenhower Johnson Memorial Tunnels.” While an Operations Center inside the Eisenhower Johnson Memorial Tunnels has already existed for decades, the technology within the Center needed to be updated to improve response times and safety. Upgrades include replacing decades-old copper

Key CDOT personnel and speakers cutting ribbon in front of the new I-70 Mountain Corridor maintenance garage bays located on the west side of the Eisenhower Johnson Memorial Tunnels. (L-R): John Lorme, CDOT director of maintenance and operations; Shawn Smith, CDOT Region 1 deputy director of maintenance; Barbara Bowman, Colorado Transportation commissioner; Karen Stuart, Colorado Transportation commission chair; Shoshana Lew, CDOT executive director; Col. Matthew Packard, Colorado State Patrol; Stan Hilkey, CDPS executive director; and Paul Fox, CDOT deputy maintenance superintendent.

wires, installing fiber optic cables, putting up new cameras and screens, all of which will increase the speed and quality of the Center’s monitors inside the new building. Quality is imperative as it helps CDOT’s operators see if there is something in the road that needs to be cleared or get more details on an incident. “The new cameras and monitors will allow us to zoom all the way into the roadway, up to two miles away from the tunnels, to detect even small debris such as nails,” said Lew. “This allows our crews to remove it from the roadway before it becomes a hazard to motorists. We also are able to

zoom in on incidents to better document and report what is going on. We will be able to see how many passengers are in a vehicle, license plate numbers and more. This helps aid our first responders, including CDOT maintainers, as they respond to an incident as they are going to have more details prior to approaching the scene that will help them know what they need ahead of time to help quickly clear the incident.” “The technology upgrades within the Eisenhower Johnson Memorial Tunnels will allow for real-time coordination and collaborative responses to traffic incidents along the I-70 corridor, par-

ticularly in those areas most known for mountain area congestion,” stated Col. Matthew C. Packard, chief of the Colorado State Patrol. “Reducing the timeframe of a partial or complete closure also reduces the hazards adversely impacting the movement of people and freight. This improved capability, coupled with motorists preparing their vehicles and driving habits for the terrain and changing road conditions, can help us avoid serious human and economic consequences.” The new maintenance garage bays on the west side of the tunnel will help crews mobilize and clear I-70 quicker as maintainers will no

longer have to move snow off their equipment, something they frequently had to do at this location. When snow starts to fall, CDOT’s maintainers at the Tunnels will already be prepped and ready to go. “We are proud to have construction complete ahead of snow hitting the I-70 Mountain Corridor,” said John Lorme, CDOT’s director of maintenance and operations. “Travelers should expect to see snow on a more frequent basis along this corridor any day now and should start preparing for winter driving now. It’s critical that motorists check their tires or invest in new snow tires ahead of the season and get familiar with Colorado’s Chain and Traction Laws.” “As public safety is at the heart of everything we do, we are pleased to witness the opening of this new operations center, which will provide improved response times and increased overall safety for those traveling along this crucial corridor that connects our diverse Colorado mountain towns and beyond,” said Stan Hilkey, executive director of the Colorado Department of Public Safety. “This new and improved facility will be instrumental in aiding first responders, CDOT teams and all others who play a role in roadway safety and we are grateful for this improvement to one of Colorado’s most heavily trafficked thoroughfares.”  (Photo courtesy of CDOT.)

Colorado Investing $140M for Statewide Improvements The Colorado Department of Transportation will be prioritizing essentials thanks to a $140.9 million funding package approved that will allow for statewide maintenance and safety improvements. The funding, approved by the Colorado Transportation Commission, builds on the Polis Administration’s significant commitments to fixing the condition of Colorado’s roads through measures such as the rural repaving program, an initiative to improve interstate paving condition and crucial measures to strengthen the highway maintenance program. These funds come through an annual Federal Highway

Administration process that redistributes unspent federal funds to states at the end of each federal fiscal year. “This funding package is overwhelmingly about reinvesting in the fundamentals and safety,” said CDOT Executive Director Shoshana Lew. “We want to fix rough roads, make roads safer and make our roads more resistant to the challenges that nature inevitably throws at them. Taking care of our existing infrastructure is every bit as important as building new infrastructure.” Of special note, the package includes $65 million for replacement and repair of culverts, the tunnels beneath roads that allow water to drain properly near road-

ways, a challenge made worse in recent decades by climate change that has brought more and larger floods and mudslides to highways, such as with CO 133 near Paonia last spring and in Glenwood Canyon in 2021. The funding would be the largest investment in culverts in recent CDOT history. “Culverts may be one of the least noticeable pieces of road infrastructure, but they’re critical for resiliency,” Lew said. “With good culverts, our roads have a much better chance of surviving floods and mudslides. When culverts fail, roads can experience major damage — which can cause serious disruption for travelers.”

The funding package also includes $10 million to install or upgrade guardrail and $7 million for rockfall mitigation. And it includes $13 million for fixing poor interstate pavement, which will allow the acceleration of pavement rehabilitation on Interstate 70 from Bethune to Burlington and builds on other recent interstate repaving work. The package also includes $8 million for avalanche mitigation and $10 million for rest areas, which includes $8.5 million to repair and reopen the Pinon Rest Area on I25 between Fountain and Pueblo. That rest area has serious plumbing and drainage problems and needed major upgrades. 

Construction Equipment Guide • Four Corners States Supplement • www.constructionequipmentguide.com • November 19, 2023 • Page 9

4Rivers Continues Colorado Legacy With Honnen Purchase EXPANDS from page 1

“This acquisition marks a significant milestone for our entire team as well as our new team members, allowing us to expand our offerings and better address the needs of our collective customers in Colorado,” said John Shearer, CEO of 4Rivers Equipment. Danny Bratton, general manager of 4Rivers Equipment, emphasized the shared commitment to customer-centric operations. “This decision is driven by our mutual dedication to providing unmatched customer service and support and we are confident that this collaboration will create value for both our customers and employees,” Bratton said. By combining resources, expertise and technology, 4Rivers Equipment will be able to provide enhanced support to customers. 4Rivers Equipment firmly believes that this transaction ushers it into a new era, enabling the company to provide enhanced customer support. 4Rivers Equipment will continue to be headquartered in Greeley, Colo., and looks forward to continuing to serve its customers and partners with excellence. About 4Rivers Equipment 4Rivers Equipment is a local John Deere dealer for construction equipment solutions, technology and support. 4Rivers Equipment provides innovative equipment and machinery and supports it with industry-leading parts and service departments for the communities it serves throughout Colorado, New Mexico and Texas.  (All photos courtesy of 4Rivers.)

(L-R) are Danny Bratton, general manager of construction and forestry; Brad Reid, director of customer support; Ryan Nielsen, branch manager, Frederick, Colo.; John Shearer, CEO; Lori Snider, HR director; and Larry Rutz, CEO.

RDO Equipment Co. Expands Footprint in Rocky Mountain Region RDO Equipment Co. recently announced that it has entered into a definitive agreement to acquire Honnen Equipment’s John Deere construction equipment locations in Wyoming, Utah and Idaho. The acquisition, expected to close Dec. 11, 2023, will expand the company’s footprint to 12 states and establish a presence for the company in the Mountain region. “We are excited to welcome Honnen’s team members and customers to the RDO family while expanding our John Deere and Wirtgen construction footprint,” said RDO Equipment Co. President Chris Cooper. “RDO and Honnen share long histories of family ownership, customer focus and values-driven business philosophies with leading reputations in our respective markets. We are confident that our shared priorities will greatly contribute to our ability to successfully blend best practices from each organization.” Founded in 1963 by Pete Honnen as Pete Honnen Equipment, today’s Honnen Equipment grew from a single store in Commerce City, Colo., to three Colorado dealerships in the first nine years. From there, the company expanded to include stores in Wyoming. In 2009, Honnen acquired Scott Machinery Co. in Utah and southeast Idaho. As the company’s territory grew, so did its product lines. Beyond John Deere Construction and Forestry equipment, Honnen has added Hamm, Kleemann,

Vogele and Wirtgen equipment lines. “The Honnen team has built longstanding, trusted relationships with customers over the last six decades,” said RDO Equipment Co. Executive Vice President Marshall Anderson, who will lead the new additions to RDO’s portfolio. “We now have the duty to build on that foundation, committing to those team members to grow the business, strengthen resources and relationships

and ultimately help customers continue to succeed. “I believe that RDO Equipment Co. is the right company to lead the Honnen legacy into the future,” said Mark Honnen, president of Honnen Equipment. “Not only do we share similar histories, but we also share a similar vision for the future of construction equipment that will be greatly driven by advances in technology. RDO has made sig-

RDO photo

The acquisition, expected to close Dec. 11, 2023, will expand the company’s footprint to 12 states.

nificant investments in technology and is well-known as a leader in the industry. Most importantly, they’re a company that values and respects the relationships we have with customers and the role we play in supporting them. This is the right company to lead Honnen into the future.” More than 150 Honnen team members will transition to RDO Equipment Co. across locations in Gillette, Wyo.; Casper, Wyo.; Cheyenne, Wyo.; Rock Springs, Wyo.; Salt Lake City, Utah; St. George, Utah; Ogden, Utah; and Idaho Falls, Idaho. “We learned a long time ago that one of the most important things we can do as a business is invest in our people and our culture,” Cooper said. “That’s exactly what we’re doing here and we’re looking forward to all the ways the Honnen team will enrich RDO culture through their depth of knowledge and experience.” About RDO Equipment Co. Founded in 1968, RDO Equipment Co. sells and supports agriculture, construction, environmental, irrigation, positioning and surveying equipment from leading manufacturers, including John Deere, Vermeer and Topcon. RDO Equipment Co. is a total solutions provider with more than 75 locations across the United States and partnerships in Africa, Australia, Mexico and Ukraine. 

Page 10 • November 19, 2023 • www.constructionequipmentguide.com • Four Corners States Supplement • Construction Equipment Guide

Arizona DOT Office Wins Four Top Awards From AASHTO The Arizona Department of Transportation Office of Communications and Public Involvement has won four top awards from an organization representing state transportation agencies across the country. ADOT took home the honors during the recent annual meeting of TransComm, the communications committee for the American Association of State Highway and Transportation Officials (AASHTO), the national nonprofit group that represents and supports state departments of transportation. The winners were:

room that simulated a public meeting; a comprehensive website; online options that supplemented traditional methods for submitting feedback; and extensive notification of engagement opportunities, including digital ads, social media posts and email alerts. Video Production-External: Sliding Bridge — SR 79 at Gila River ADOT used an innovative approach to replace this key bridge in Florence by assembling the new structure next to the existing bridge and then sliding it into place.

TransComm PR Professional of Year: Transportation Event: I-10 Doug Pacey Broadway Curve Improvement Project: As a public information officer and now assistant Ready to Rubble communications director for digital communications, Doug Pacey (Center), assistant communications director for digiA comprehensive communication plan, stakeholder with responsibilities that include oversight of ADOT’s tal communications, was recognized as PR Person of the Year. tours and media event presented removing three social media accounts, Pacey leads development of Interstate 10 bridges, requiring a weekend closure, as safety campaigns, including the attention-grabbing messages “Ready to Rubble: The Ultimate Bridge Takedown.” In that appear on digital message boards. He has spoken to addition to information, photos and video shared through TransComm and other regional and national groups about ADOT’s distribution channels, including its YouTube video, the effective use of humor in transportation communications. several media outlets provided live shots and other behindthe-scenes coverage. Virtual Public Involvement: ADOT Communications and Public Involvement sup2050 Long-Range Transportation Plan ports projects and agency priorities through public involveA broad cross-section of Arizonans, nearly 10,000 in all, ment outreach, news media relations, safety communicaprovided input for this recently adopted blueprint and vision A bridge slide along SR 79 saw ADOT use an innovative tions, social media engagement, graphics and video producfor ADOT’s priorities over the next 25 years. Virtual out- approach to replace this key bridge in Florence by tion, website design and operations, internal communicareach included an interactive online survey; public meetings assembling the new structure next to the existing tions, constituent services and more.  held via Zoom, telephone and a self-guided online meeting bridge and then sliding it into place. (All photos courtesy of ADOT.)

Stertil-Koni Welcomes ODP to Its Distributor Network Heavy duty bus lift and truck lift leader StertilKoni announced that it has welcomed Optimized Distributor Partners (ODP) — a family owned and operated automotive equipment distribution and service company located in Commerce City, Colo. — to its exclusive North American disThe ODP team tributor network. “We know automotive equipment,” with in-depth expertise in vehicle lifts, wheel service, shop equipment and heavy duty service equipment, ODP said. The company is headed by Jeff Murray, president, and his brother, Tim Murray, vice president, and supported by an experienced team of service technicians, sales experts and back office support. ODP also has a commercial sales specialist, Matt Elder, who will focus on the Stertil-Koni product line. In making the announcement, Stertil-Koni General Manager Scott Steinhardt said, “We

are extremely pleased to welcome the ODP team to the Stertil-Koni network. What makes this partnership so special is that both companies have built their respective businesses by focusing on the delivery of worldclass customer care, superior product selection and an unwavering focus on safety.” “ODP brings a deep, experienced team to the Colorado region for Stertil-Koni and we are pleased to welcome them into our growing family of outstanding distributors,” said Stertil-Koni president, Jean DellAmore.  (Photo courtesy of ODP.)

Construction Equipment Guide • Four Corners States Supplement • www.constructionequipmentguide.com • November 19, 2023 • Page 11

FOUR CORNERS PUBLISHING 2023 Issue

Closing

Publishing

December 6

December 17

Page 12 • November 19, 2023 • www.constructionequipmentguide.com • Four Corners States Supplement • Construction Equipment Guide

FLEXIBLE FINANCING OPTIONS O FOR YOUR ENGINE OVERHAUL 0% FOR 6 MONTHS* 0% FOR 12 MONTHS* 1 9% FOR 18 MONTHS* 1.9% MONTHS

3.9% FOR 244 MONTHS* 4.9% FOR 366 MONTHS*

On new or reman Cat parts with or withoout service, for purchases of $500 or more at participatinng Cat Dealers in the United States. Valid through December 31, 2023.

Scan this QR code or vissit catcard.com to apply todday.

We’re bringing you a new way to pay for and prootect your engine overhaul. Cat® engiines and major components are carefully engineered to be rebuilt and repaired to maximizze the life of your engine – a rebuild or o repair can give your enginne a second life to give you the uptim me and productivity you needd. Cat® Card has alwayyys been the fast,, easyy wayy too ppayy for pparts,, service, rentals and rebuilds, wherever the job takes you. • No annuaal fee • Flexible payment p terms • Competitiive rates • Access too special offers Eligible account holdders can also earn 1% Cat Vantage Points** on all qualifying purchases.

* Offer valid through December 31, 2023. Financing is subject to credit approval for customers who qualify through Caterpillar Financial Commercial Account Corporation. Not all buyers will qualify. Offer subject to change without prior notice. Additional terms and conditions may apply. A $500 minimum m purchase invoice is required unless otherwise stated. Rental transactions do not count towardd $500 minimum. Offer does not apply to Purchases subject to invoice billing (see your Cat Card aggreement for invoice billing terms). ** Cat Vantage Points are earned on qualifying purchases at participating Cat dealers, Thee Cat Rental Store and approved online retailers - either Parts.Cat.Com or Cat Central. Cat Vantage Pointts can be redeemed for Cat Credits to be used on future purchases of parts, service, sales, rentals annd work tools at participating Cat dealers, The Cat Rental Store and approved online retailers. Availability to use Cat Credits on Parts.Cat.Com and Cat Central varies by dealer. Not all dealers will participaate. Visit cat.com/catcardrewards for full details on earning Cat Vantage Rewards through your Cat Cardd, as well as rules governing Cat Credits. © 2023 Caterpillar. All Rights Reserved. CAT, CATTERPILLAR, LET’S DO THE WORK, their resp pective logos, “Caterpillar Corporate Yellow”, the “Power Edge” and Cat “Modern Hex” trade dress as w well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used u without permission.