Promotion
July - September 2020
SciCan OPTIM 1 p. 2-3
CanalPro Jeni p. 8
MicroMega REMOVER p.13
Sign up to the COLTENE newsletter and keep up to date.
INFECTION CONTROL
Infection Control for every practice
1
MINUTE
CONTACT TIME**
OPTIM® 1 ONE-STEP CLEANER & DISINFECTANT Active Ingredient: 0.5% Hydrogen Peroxide
With OPTIM 1 there is no need to compromise between efficacy and being protected. With a fast broad-spectrum contact time it is one of the fastest and most effective cleaner & disinfectants. It is also safe and gentle for you and surfaces. OPTIM 1 gives you confidence that you are compliant and protecting your patients, staff and the environment; the perfect balance. Demonstrated virucidal efficacy also extends to new and emerging pathogens, with a 30 second contact time applying to Novel Coronavirus (COVID-19), Severe Acute Respiratory Syndrome (SARS CoV) and Middle East Respiratory Syndrome (MERS CoV).
FAST AND GENTLE Effective against COVID-19 2
** Effective within 1 minute according to European Standards; EN 14476, EN 14348, EN 13727, EN 13624, EN 16615. According to the required RKI/DVV standard in Germany SciCan OPTIM 1 is FULL VIRUCIDAL within 2 minutes
Fast Broad-Spectrum Disinfectant
Compatible
Surfaces must remain wet for the entire contact time to achieve disinfection. Adeno, Polio, Murino Noro in only 30 seconds according to EN 14476
Compatible with a wide range of hard, non-porous materials and surfaces.
Tuberculocidal & Fungicidal in 1 minute
Bactericidal & Virucidal in 30 seconds according to EN 14476 Full virucide in 2 minutes according to RKI/DVV standard (Polio, Adeno, Murino Noro, SV40) Effective in 1 minute according to EN 16615 Excellent wettability – stays wet long enough for contact times to elapse
Effective One-Step Cleaner
INFECTION CONTROL
ACTIVE AGAINST COVID-19
Safe and Gentle Free of artificial scents Non-Toxic Non-irritating to skin, eyes and respiratory system No GHS hazard pictograms, signal words or statements Leaves no active residue; doesn’t contribute to antimicrobial resistance
Environmentally Friendly The active ingredient Hydrogen Peroxide breaks down into water and oxygen leaving no active residues which reduces the environmental impact.
An effective 1 step cleaner disinfectant removes the organic debris while it disinfects.
BOOK A DEMONSTRATION WITH YOUR TERRITORY MANAGER TO SEE HOW EFFECTIVE THE SWITCH TO OPTIM 1 CAN BE. SciCan OPTIM 1 Ready-to-use Pre-saturated Wipes RTU Wipes 15 x 18 cm (12 tubs x 160 sheets per tub) REF: OPTEU1-12W RTU Wipes 25 x 25 cm (12 tubs x 60 sheetsper tub) REF: OPTEU1-W10x10
For more information 3
INFECTION CONTROL
STATMATIC ™ smart
NEW
´ T horough internal cleaning and maintenance of dental instruments like contra angles and turbines. ´ C ompact design – saves valuable space in the hygiene room. For convenience, the USB-Stick and test adapter can also be stored space-saving within the unit, under its cover. ´ F or safety and traceability purposes all cycles are documented automatically and can easily be transferred to a computer by using the USB key provided. ´ T he automated cleaning and maintenance process takes only about 3 minutes per instrument. ´ Easy installation – only electricity and a compressed air connection is required ´ The unit is equipped with a separate tip for the specific maintenance of the chuck.
Specifications
Inside cleaning and maintenance
1
Cleaning of spray water and spray air channel with SciCan cleaner
Cleaning of drive air channel and 2 hollow parts with SciCan cleaner
3
4
Maintenance of the gear with SciCan oil
Dimensions (W × H × D)
300 × 280 × 345 mm
Weight
7.3 kg
Rated Voltage
100-230 V
Rated Frequency
50/60 Hz
Rated Power
max. 45 VA
Protection Class
1
Ambient Temperature
5-35 ˚C
Noise
60 (65) dB
Relative Humidity
max. 85 %
Air Pressure
4,5-6 bar
Air Consumption
40 Nl/min
Residual Oil Content
max. 0,1 mg/m3
Residual Dust
max 1µ; max. 1 mg/m3
Residual Water
max. 0,1 g/m3 at -40 °C
Simple Dam Kit with Elasti-Dam REF H02900
Dental Dam Kits Hygenic all in one dental dam kits including dental dam sheets (latex or non-latex), clamps, and accessories.
15%
6“ x 6“ (152 x 152 mm) Elasti-Dam – green medium; 36 sheets (H11625); 6“ (152 mm) Plastic frame (H01414); Fiesta 9W wingless color-coded clamp pack; 6“ Template; Latex Wedjets Cord (small); Dental dam punch; Dental dam forceps
TREATMENT AUXILIARIES
HYGENIC®
DISCOUNT ON ALL DENTAL DAM KITS
Dental Dam Frame U-shaped metal frame, 6“ (152 mm) REF H07083
Brinker Clamps (Tissue Retractors) ´ Provide maximal retraction without laceration of gingival tissues Complete Kit with Winged Clamps - REF H02778 6“ x 6“ (152 x 152 mm) Dam – green medium; 36 sheets; 6“ (152 mm) Plastic frame (H01414); Fiesta 9 winged color-coded clamp pack; 6“ Template; Wedjets Cord (small); Dental dam punch; Dental dam forceps
´ Available as a set or sold individually REF H01054
Complete Kit with Wingless Clamps - REF H02790
5
TREATMENT ENDODONTICS AUXILIARIES
HYGENIC® Gloss Winged & Wingless Clamps
Framed Non- Latex Flexi Dam The HYGENIC Non-Latex Flexi Dam is available with an ultra-convenient, built-in-frame. The flexible frame is designed with a convenient working size of 100 mm × 105 mm to ensure for easy placement without getting in the way. The smooth surface of the plastic frame helps to maximise patient comfort when positioned on their skin
´ Convenient built-in-frame - saves time Stainless steel clamps most needed for dam applications. Available in winged and wingless.
3+1
BUY 3 - GET 1 FREE*
Standard Latex Dental Dam HYGENIC Dental Dam is made of pure, natural rubber latex. Tough and hard to tear it provides best possible retraction. The pre cut latex dam is available in different thicknesses and colours. 152mm x 152mm Green: Thin H02146 Medium H02147 Heavy H02148 Extra Heavy H02149 Blue: Medium H03530 BUY 3 - GET 1 FREE* Heavy H07315
3+1
66
´ Highly elastic Flexi Dam material tear resistant and easy placement ´ Latex free - allergy free ´ Can be folded for taking x-rays Size 100 x 105 mm, medium, 20 pcs REF H00750
Standard Non-Latex Dental Dam Latex free Dental Dam, tear resistant with excellent recovery properties Non-Latex, Standard, 15 pcs 152mm x 152mm REF H09105 Children's size 127mm x 127mm REF H09928
3+1
BUY 3 - GET 1 FREE*
4+1
BUY 4 - GET 1 FREE*
ENDODONTICS
CanalPro™ Irrigation Solutions Irrigation solutions are used to help dissolve vital and necrotic tissue, eradicate bacteria and other microorganisms, remove the smear layer, and lubricate the canal system. As no single irrigation solutions exists that can accomplish all of the above goals, multiple solutions should be used during clinical treatment. Sodium hypochlorite (NaOCl), ethylenediamenetetraacetic acid (EDTA), and 2% Chlorhexidine (CHX) are commonly used for chemical debridement during the process of canal preparation.
3+1
BUY 3 SOLUTIONS - GET 1 FREE*
CanalPro EDTA 17% 17% EDTA solution (pH 8.5) Removes smear layer and dentin mud Opens dentin tubules for: - Disinfection solutions to work better - Better adhesion of sealers and obturation materials 500ml - REF 60019651
CanalPro NaOCI 3% or 6% For irrigation/debridement of root canals during and after treatment
CanalPro CHX 2% 2% chlorhexidine digluconate solution Substantive
Available in 3% and 6% formula
Very effective against E. faecalis and fungal
500ml - 3% - REF 60019655 500ml - 6% - REF 60019656
500ml - REF 60019658
7
ENDODONTICS
CanalPro Jeni TM
Digital assistance system for canal preparation Autonomous "navigation" in the endo canal owing to revolutionary software
The new CanalPro Jeni endomotor has a patent-pending digital assistance system for canal preparation, which uses complex algorithms to control the file movement at millisecond intervals. The rotary motion and speed are continuously controlled based on current intensity and torque.
Different routes, obstacles and situations CanalPro Jeni is named after its developer Prof. Dr. Eugenio Pedullà and guides you safely through the traffic like a navigation system. As such, the Jeni system automatically adapts to the individual root canal anatomy, working in unison with the mechanical and chemical preparation every step of the way.
Jeni - ready - go!
CanalPro Jeni, complete set REF 60023659 includes: 1 × Control unit 1 × Motor with apex measuring contact 1 × Fully insulated angled handpiece 1:1 1 × Bluetooth foot switch 1 × Power supply 1 × Apex cable set 1 × Holding bracket for apex cable
8
ASK YOUR TERRITORY MANAGER FOR A DEMONSTRATION See the brochure
ENDODONTICS
HyFlex™ Remover The essential piece for your retreatment
One file to remove the canal obturation Remover is a new addition to the Hyflex range for the removal of old obturation material, integrating the latest generation of cross-sectioning with 3 cutting edges and heat treatment.
NEW
Just one file for the removal of old material You only need one instrument to remove the Gutta-Percha in the canal.
Efficient without solvent use The only file on the market clinically qualified to be used without solvent.
Safe instrument Due to its design, its non-cutting tip and its protocol, REMOVER avoids ledges and respects the root canal anatomy and while being effective.
Reduce the learning time Remover fits perfectly into an existing retreatment procedure without requiring a change in approach. It’s an essential tool for retreatment and can be used with conventional shaping files.
HyFlex™ REMOVER Blister pack of 5 instruments - Sterile B5 HyFlex Remover L19 n30 7%
REF 60023649
B5 HyFlex Remover L23 n30 7%
REF 60023658
9
ENDODONTICS
HyFlex™ EDM STAYS ON TRACK TREATS 80% OF ALL CASES WITH THE ONE FILE NE W FILE FOR COMPLEX C ANALS
Orifice Opener 25/.12
HyFlex™ EDM Files
Glide Path File 10/.05
Preparation file 20 /.05
OneFile 25 / ~
Glide Path File 15/.03
20 +10 BUY 20 - GET 10 FREE* ON HYFLEX EDM REFILLS
EXCLUSIVE OFFER ONLY AVAILABLE FROM YOUR TERRITORY MANAGER Refill × 3
Refill × 3
Refill × 3
Refill × 3
Rotation speed 400 rpm and 2.5 Ncm
Rotation speed 300 tr/min and 1.8 Ncm
Rotation speed 400 rpm and 2.5 Ncm
Rotation speed 400 rpm and 2.5 Ncm
Refill × 3
Long. 21 mm
-
REF 60022269
REF 60022275
REF 60022270
REF 60023493
Long. 25 mm
-
REF 60019594
REF 60022276
REF 60019595
REF 60023492
Long. 15 mm
REF 60019596
-
-
-
-
For more information
10
Orifice Opener 25/.12
Simple shaping kit REF 60022267 REF 60019363
21 mm 25 mm
Glide Path File 10/.05
Preparation File
1 × 25/.12
20/.05
1 × 10/.05 1 × 25/~
OneFile
NEW
Medium shaping kit REF 60022277 REF 60022278
21 mm 25 mm
HyFlex EDM Finishing Kit (Optional) REF 60019364
1 × 10/.05
1 × 40/.04
1 × 20/.05
1 × 50/.03
1 × 25/~
1 × 60/.02
25/~
HyFlex™ EDM Glidepath Files Glidepath HyFlex EDM File 15 / .03 GPF is a very secure solution for complex anatomies of the root canal. ´ Easy instrumentation of very narrow canals ´ Uncomplicated preparation with a limited field of vision in very narrow canals ´ For creating a glide path in difficult anatomy
ENDODONTICS
HyFlex™ EDM Kits
20 +10
HyFlex™ EDM Finishing Files Refill packs - x3 files
HyFlex EDM Finishing File 40/.04
HyFlex EDM Finishing File 50/.03
HyFlex EDM Finishing File 60/.02
REF 60019597
REF 60019598
REF 60019599
BUY 20 - GET 10 FREE* ON HYFLEX EDM REFILLS
EXCLUSIVE OFFER ONLY AVAILABLE FROM YOUR TERRITORY MANAGER
NE W FILE FOR COMPLEX CHANNELS
HyFlex EDM Glide Path File 15/.03, 21 mm REF 60023493 3 x 15/.03
HyFlex EDM Glide Path File 15/.03, 25 mm REF 60023492 3 x 15/.03
11
ENDODONTICS
HyFlex™ EDM Paper and Gutta-Percha Points HyFlex paper and guttapercha points are optimally matched to the HyFlex EDM files and thus contribute to the best possible treatment result. They correspond to the respective sizes and have the perfect taper to dry and obturate root canals previously prepared with HyFlex files precisely and as quickly as possible. HyFlex EDM guttapercha points are ideal for obturating root canals. HyFlex EDM paper points are ideal for drying root canals.
´ ´ ´ ´ ´
Precise fit Colour-coded Highest quality assorted or individual sizes ≥ 28mm
HyFlex™ CM GuttaPercha Points Greater Taper HyFlex CM guttapercha points are ideal for obturating root canals which have been prepared with HyFlex CM files. At the tip of the point the diameter corresponds to the ISO sizes, but then the conicity follows the one from the CM files ≥ 28mm
HyFlex EDM Paper and Guttapercha points selection Size / tape Paper points 100 pcs 20 /. 05 60022742 OneFile 25/~ 60022743 40 /. 04 60022676 50 /. 03 60022741 60 /. 02 60022740 Assortment 20/.05 - 60/.02 60022744
Guttapercha points 60 pcs 60022706 60022707 60022708 60022709 60022710 60022705
HyFlex CM Guttapercha points Greater Taper selection
12
.04 #20
60 pcs
REF 60022689
.06 #30
60 pcs
REF 60022699
.06#45
60 pcs
REF 60022702
.04 #60
60 pcs
REF 60022696
.04 #20-45
60 pcs
REF 60022703
.06 #20-45
100 pcs
REF 60022704
ENDODONTICS
REMOVER The essential piece for your retreatment
One file to remove the canal obturation REMOVER is a single file for the retreatment procedure, bringing methodological reproductibility to retreatments while making them safer.
NEW
Only one file to remove old material Remove the Gutta-Percha in the canal with only one instrument.
Efficient without solvent use The only file on the market clinically qualified to be used without solvent.
Safe instrument Due to its design, its non-cutting tip and its protocol, REMOVER avoids ledges and respects the root canal anatomy and while being effective.
Reduce the learning time REMOVER fits perfectly into an existing retreatment procedure without requiring a change in approach. It’s an essential tool for retreatment and can be used with conventional shaping files.
MicroMega REMOVER Blister pack of 5 instruments - Sterile B5 MicroMega Remover L19 n30 7% REF 20952301 B5 MicroMega Remover L23 n30 7% REF 20952311
13
ENDODONTICS
MicroMega ONE CURVE
One Curve A SINGLE FILE, IN CONTINUOUS ROTATION
20 +10
Blister pack of 5 instruments - Sterile B5 One Curve n25 L21 4% REF 20949431 B5 One Curve n35 L21 4% REF 20949432 B5 One Curve n45 L21 4% REF 20949433 B4 One Curve L21 Asst REF 20949435 B5 One Curve n25 L25 4% REF 20949441 B5 One Curve n35 L25 4% REF 20949442 B5 One Curve n45 L25 4% REF 20949443 B4 One Curve L25 Asst REF 20949445 B5 One Curve n25 L31 4% REF 20949451 B5 One Curve n35 L31 4% REF 20949452 B5 One Curve n45 L31 4% REF 20949453 B4 One Curve L31 Asst REF 20949455
BUY 20 - GET 10 FREE* ON ONE CURVE
EXCLUSIVE OFFER ONLY AVAILABLE FROM YOUR TERRITORY MANAGER
One Curve Paper points and Guttapercha points ´ The highest Coltene quality standard ´ Paperpoints are machine rolled, glue-free and laser-measured ´
14
Guttapercha Points are latex-free, laser-measured, produced fully automatically, are very suitable for vertical, lateral and thermal condensation techniques, radiopaque, stable and yet flexible enough to adapt precisely to the duct walls, volume-resistant, optimally tissue compatible
MICROMEGA ONECURVE GP 25/.06 SB - 60 pieces
REF 60023612
MICROMEGA ONECURVE PP 25/.06 CP - 144 pieces
REF 60023616
For more information
ENDODONTICS
NOW WITH RECIPROCATING MOVEMENT
Dual Move
REF 52002004
´ Cordless motor, well-balanced in hand and ambidextrous ´
Miniature head, 340° rotative contra-angle
´
Continuous rotation and reciprocating movement
´ Fully customisable ´ Accurate apex localisation ´ Stand alone or combined use
Dual Pex ´ User friendly screen ´ Accurate localisation even in wet and dry root canals, owing to multi-frequency positioning technology ´
Stable delivered voltage whatever the battery level
´
Real-time visual and sound indications
´ Auto power-off to save the battery ´
Plug & Play self tester REF 51300050
15
ENDODONTICS
The global market leading post system
ParaPost X System ®
´ A complete family of posts for any clinical situation ´ State-of-the-art universal endodontic post system for all direct and casting techniques. ´ S tandardised system with seven sizes including two intermediate sizes Non-end cutting, depth-calibrated drills for precise canal preparation ´ Diamond pattern design, multiple venting channels
Intro Kits Fiber Lux Introductory Kit Metal-free Posts
Taper Lux Introductory Kit Metal-free Posts REF PF180
REF PF170
System Introductory Kit REF P780T XP Titanium posts REF P780 XP Stainless steel posts
Introductory Kit REF P880 XH Titanium posts REF P680T XT Titanium posts
16
System Introductory Kit Casting REF PF781 XP
Dual Curing Composite Based Post Cement and Core Build Up Material
ENDODONTICS RESTORATION
ParaCore ´ 3 indications - 1 material
´ For post cementation, core construction and cementation of crowns, bridges, inlays and onlays ParaCore Refill Dentin REF 5887 2 × 5ml ParaCore Dentin 1 × 20 Mixing Tip Short Super Fine
ParaCore 5 ml Intro Kit REF 5885 1 × 5 ml ParaCore Dentin 1 × 5 ml ParaCore White 1 × 5 ml ParaCore Dentin SLOW 1 × 5 ml ParaCore Trans SLOW 3 × 3 ml ParaBond Non-Rinse Conditioner + Adhesive A & B 20 × Mixing Tip Short Super Fine
ParaCore Refill White REF 5886 2 × 5ml ParaCore White 1 × 20 Mixing Tip Short Super Fine ParaCore Slow Refill Dentin REF 60011391 2 × 5ml ParaCore Slow Dentin 1 × 20 Mixing Tip Short Super Fine
ParaBond
Etching & Bonding
´ Seals the tooth surface and minimises the risk of postoperative sensitivities
ParaBond Adhesive Kit, 3 pcs REF 7486 1 x 3 ml Non-Rinse Conditioner 1 x 3 ml Adhesive A 1 x 3 ml Adhesive B
´ Ideal for situations where light might not penetrate, such as for post cementation, metal crowns, deep cavities or opaque ceramic
ParaBond Adhesive Refill, 2 pcs REF 7493 1 x 3 ml Adhesive A 1 x 3 ml Adhesive B
´ High shear bond strengths on dentine and enamel ´ Universally applicable with chemically, dual and light-curing materials
SoloCem
Self Adhesive Dual Curing Resin Cement
DuoCem
Strong And Long Lasting Cementation
SoloCem Refill Dentin REF 60014062 1 × 5ml SoloCem Dentin 5 × Mixing Tip Brown Short Super Fine 5 × Mixing Tip Brown Short Fine
DuoCem Refill Dentin REF 60014382 1 × 5 ml DuoCem Dentin 5 × Mixing Tip Short Fine 5 × Mixing Tip Short Super Fine
SoloCem Refill White Opaque REF 60014061 1 × 5ml SoloCem White Opaque / as above
DuoCem Refill White Opaque REF 60014383 1 × 5 ml DuoCem White Opaque / as above
SoloCem Refill Translucent REF 60019840 1 × 5ml SoloCem Translucent / as above
DuoCem Refill Trans REF 60020092 1 × 5 ml DuoCem Trans / as above
17
RESTORATION
Light-Curing Single-Component Universal Bond
ONE COAT 7 UNIVERSAL
Contains MDP - One bond for all indications
´ Self Etch, Selective Etch and Total Etch, a bond for all adhesive techniques ´ With activator for chemically curing products ´ Exceptional bonding values on enamel and dentine
2+1
´ Excellent marginal seal and outstanding marginal leakage tightness ´ Ergonomically shaped, triangular bottle with dropper for fine dosing
BUY 2 - GET 1 FREE* ON 5ml REFILLS
ONE COAT 7 UNIVERSAL Intro Kit REF 60019538 1 × 5 ml ONE COAT 7 UNIVERSAL 1 × 2.5 ml Etchant Gel S 1 × 20 pcs. Application needles 1 × 50 pcs. Brushes black 1 × Mixing well with cover
UNIVERSAL ACTIVATOR 3ml for self and dual cure materials REF 7054 1 x 3ml Activator, 1 x 50pcs. Microblush, black
96%
18
ONE COAT 7 UNIVERSAL Refill REF 60019539
RESTORATION HIGHLIGHT KIT SAVE OVER 50 % ON BUYING INDIVIDUALLY! Restoration Highlight Kit BRILLIANT EverGlow ´ Exceptional polishability and long-lasting brilliance ´ Aesthetic single-colour restorations ´ Ideal handling through smooth consistency ONE COAT 7 UNIVERSAL ´ Self, Selective and Total Etch, a bond for all adhesive techniques ´ Exceptional bonding values on enamel and dentine ´ Excellent marginal seal and outstanding marginal leakage tightness DIATECH ShapeGuard ´ Adapts to any surface ´ Uniform pressure distribution. ´ Tooth morphology preserved ´ Fast, easy and intuitive finishing & polishing ´ Optimised for composite and ceramics
Buy either kit and get
A FREE COMPOSITE INSTRUMENT SET UK promotion only - copy invoice required send to info.uk@coltene.com
Restoration Highlight Kit Syringes REF 60020090 3 x BRILLIANT EverGlow Syringes (3g) (1 x A1/B1, A2/B2, A3/D3), 1 x One Coat 7 Universal Bond 5ml +50 brushes, 2 x DIATECH ShapeGuard brushes for composite (1 x pre-polisher and 1 high lustre)
Restoration Highlight Kit Tips REF 60020091 30 x BRILLIANT EverGlow Tips 0.2g, 10 tips of each, 1 x One Coat 7 Universal Bond 5ml +50 brushes, 2 x DIATECH ShapeGuard brushes for composite (1 x pre-polisher and 1 high lustre)
RESTORATION
The perfect way to try 3 new COLTENE materials
RESTORATION
Universal submicron hybrid composite
BRILLIANT EverGlow® Enduring gloss – made brilliant Thanks to its sophisticated load composition, BRILLIANT EverGlow immediately produces an exceptionally smooth, glossy and satin-finished surface as soon as the filling is put in place. Polishing is simplified and a very aesthetic restoration can be done in no time. In addition, the versatile BRILLIANT EverGlow filling material excels in its enhanced gloss retention.
´ Exceptional polishability and long-lasting brilliance
BRILLIANT EverGlow® BRILLIANT EverGlow® Refill Syringes
BRILLIANT EverGlow® Refill Tips
1x Syringe - 3g
20 x Tip - 0,2
BLEACH
Tips > 60019706
´ Aesthetic single-shade restorations ´ Versatile shade system with three translucency levels
A1/B1
´ Excellent sculptability and smooth consistency ´ Good wettability with minimal stickiness to the instrument
A2/B2
A3/D3
A3.5/B3
C2/C3
3+1
BUY 3 - GET 1 FREE* ON BRILLIANT EVERGLOW
20
Syringe > 60019697
A4/C4
TRANSLUCENT
Syringe > 60019704 Tips > 60019718
BLEACH TRANSLUCENT
Syringe > 60019705 Tips > 60019719
OPAQUE A3
Syringe > 60019745 Tips > 60019748
OPAQUE A1
Syringe > 60019744 Tips > 60019747
OPAQUE BLEACH
Syringe > 60019743 Tips > 60019746
Syringe > 60019698 Tips > 60019707 Syringe > 60019699 Tips > 60019708 Syringe > 60019700 Tips > 60019709 Syringe > 60019701 Tips > 60019710 Syringe > 60019702 Tips > 60019716 Syringe > 60019703 Tips > 60019717
Additional shades coming soon Xtra White Bleach (XWB) White Bleach Translucent (WB Trans) Opaque A2 (OA2) Opaque A4 (OA4)
Watch the video...
BRILLIANT EverGlow® System Kit Syringes
REF 60019722 9 x syringes, 3g 1 x BL, A1/B1, A2/B2, A3/D3, A3.5/B3, C2/C3, A4/C4, BL Trans, Translucent & Shade guide
BRILLIANT EverGlow® BRILLIANT EverGlow Flow provides convincing aesthetic results and is the perfect partner for the universal BRILLIANT EverGlow composite. The aesthetic composite is easy to handle, and suitable for a host of different indications.
RESTORATION
BRILLIANT EverGlow®
BRILLIANT EverGlow® System Kit Tips
REF 60019723 60 x Tips 0.2 g - 5 x BL, 8 x A1/B1, A2/B2, A3/D3, A3.5/D3, 5 x C2/C3, A4/C4, BL Trans, 8 x Translucent & Shade guide
BRILLIANT EverGlow® Flow BRILLIANT EverGlow® Flow 1 × 2g Syringe 5 x Standard application needles 5 x Fine application needles 0.4 mm
BLEACH BL
A1/B1
A2/B2
A3/D3
A3.5/B3
A4/C4
Syringe > 60019752
Syringe > 60019753
Syringe > 60019754
Syringe > 60019755
Syringe > 60019756
Syringe > 60019757
TRANSLUCENT TRANS
Syringe > 60019758
OPAQUE A2 OA2
Syringe > 60019751
3+1
BUY 3 - GET 1 FREE* ON BRILLIANT EVERGLOW FLOW
21
RESTORATION
Flowable dual curing posterior restorative material
Fill-Up!®
10 mm
5 sec. Fill-Up!® Intro Kit
Deep. Fast. Perfect.
Fill-Up! Intro Kit REF 60019973 2 x 4.5 g Fill-Up!™ Universal 1 x 5 ml OneCoat 7 Universal 1 x 3 ml OneCoat 7 Universal Activator 6 x Mixing tips Short Super Fine 8 x Mixing tips Short Fine
´ Optimal depth polymerisation with minimal shrinkage due to dual curing system. ´ Guaranteed single-layer technique - even in very deep cavities. ´ Optimised sealing of margins - reduced post-operative sensitivity ´ Universal shade in a convenient Automix syringe for efficient placement
Fill-Up!® Refill Fill-Up! Refill
"
Given the move towards less amalgam use there is going to be greater need for suitable alternative materials and composite resin will lead the way. There are likely to be increased use of novel techniques including bulk-fill restorative materials. Fill-Up is one such material that allows rapid cavity filling, easy finishing and a reasonable wear resistance with simple top-up and repair options for long-term maintenance.
"
Professor Brian Millar
REF 60019341 1 × 4.5 g Fill-Up! Universal 3 × Mixing Tip Short Super Fine 4 × Mixing Tip Short Fine
RESTORATION
Temporary Restorations
DuoTEMP® Double security keeps you smiling ´
Dual-curing
´
High marginal seal due to slight expansion
´
Good retention, easy removal
´
Contains zinc oxide and fluoride for additional protection
´
Eugenol-free - no effect on the curing of composites
´
Radiopaque
2+1
DuoTEMP DuoTEMP Single Pack REF 5831 1 syringe of 5 g
BUY 2 - GET 1 FREE* ON SINGLE OR ECO-PACK
DuoTEMP Eco Pack REF 7090 5 syringes of 5 g
SYNERGY®D6 Easy and aesthetic ´ Non-sticky ´ Good sculptability ´ High resistance to the operating lamp ´ Low shrinkage ´ Quick, excellent polishability
3+1
BUY 3 - GET 1 FREE*
SYNERGY D6 SYNERGY D6 Refill - syringe 1 Syringe (4 g/2 ml)
3+1
BUY 3 - GET 1 FREE*
SYNERGY D6 Flow SYNERGY D6 Flow Refill - syringe 1 Refill (2.3 g/1.25 ml)
SYNERGY D6 Refill - tip 1 Pack (10 tips x 0.25 g/0.125 ml)
23
PROSTHETICS
A-silicone impression material
AFFINIS®
PERFECT IMPRESSIONS
´ Innovative surface affinity ´ Outstanding flow properties in wet environment ´ Ideal processing time, perfect oral setting time ´ Excellent readability
ALL AFFINIS REFILLS
4+1
BUY 4 - GET 1 FREE* AFFINIS Putty REF 6531 Fast Putty Soft REF 6530 Putty Soft REF 6535 Putty Super Soft each 300 ml (base and cat.)
AFFINIS System 360 Refill REF 6482 MonoBody REF 6487 Heavy body REF 6472 Putty 2 x 380 ml (base and cat.) 1 x Fixation Ring
AFFINIS System 50 REF 6501 Light body REF 6590 Heavy body REF 6511 Regular body REF 6601 Fast Light body REF 6611 Fast Regular body REF 6650 Fast Heavy body REF 6775 PRECIOUS Light body REF 6776 PRECIOUS Regular body 2 x 50 ml Cartridge, 12 x Mixing Tips
24
PROSTHETICS
SYMPRESS 2
Ask your Territory Manager about our
FREE SYMPRESS 2 OFFER
25
PROSTHETICS
A-Silicone impression material
PRESIDENT The Original A SMALL STEP FOR DENTISTS. A GREAT STEP FOR DENTISTRY. ´ High tear strength and elasticity ´ Optimised flowing behavior and thixotropy ´ Easier-to-mix putties
PRESIDENT The Original Putty
´ New and more contrasting colours ´ New consistencies
Putty Putty soft Putty soft fast Putty super soft 2× 2×
Putty
Putty soft
Putty soft fast
60019942 60019943 60022166 60019944
300 ml spoons
Putty super soft
Light cartridge 50 ml Regular body
Light body
Xtra light body
Regular body Light body Xtra light body
60019939 60019938 60019937
2 × 50 ml 12 × mixing tips universal
System 360 MonoBody Heavy body 2×
26
380 ml
60019946 60019948
Product discontinuation coltex®, coltoflax® and RAPID
JET BLUE BITE ´ Stays right where you want it
Speedex®
´ No resistance to closure, no rebound
The C-silicone with A-silicone quality
´ Excellent handling and fast setting
3 become 1
PROSTHETICS
A-Silicone bite registration material
´ High end (89 Shore A), yet flexible for easy trimming ´ Two setting times available
´ One for all: the Speedex Universal Activator for all wash and tray materials
´ Choose the setting time:
´ New Speedex putty soft material impresses with outstanding final hardness
Fast: 30s working time, 40s oral setting time
´ You can customise the working time by increasing or reducing the amount
Superfast: 20s working time, 30s oral setting time
JET BLUE BITE Fast 50ml Refill REF 6491 Single Pack 1 x 50 ml Cartridge 6 x Mixing Tips Pink 6 x Spreader Tips JET BLUE BITE Super Fast Refill REF 6493 Single Pack 1 x 50 ml Cartridge 6 x Mixing Tips Pink 6 x Spreader Tips
of activator paste
4+1
BUY 4 - GET 1 FREE*
Look inside Coltex®, Coltoflax® and RAPID refill packs for the promotional code to use at speedex.coltene.com 27
ROTARY INSTRUMENTS
Multilayer diamond instruments
DIATECH®
DIATECH® Kits COMPOSITE PREPARATION AND FINISHING KIT REF 250059AA This kit comprises 12 Multilayer FG Diamonds in 2 different grit sizes, 2 Silicone polishers and 1 polishing brush for contra-angles. The diamond coated cutting surface of these instruments is pointed at an angle of approximately 95°. The range of applications of these diamonds covers trimming, contouring and finishing the occlusal surfaces of composite restorations and finishing porcelain inlays and onlays chairside. The polisher as well as the polishing brushes provide the surface with a tooth-like enamel gloss.
COMPONEER PREPARATION AND FINISHING KIT by Dr. Mario Besek REF 60013844 Prep, Finish, Polish! The selected, coarse, blue-coded diamonds are ideally suited for prep-work, the finer red and white coded diamonds for finishing and contouring. The specially designed finest diamond (orange) and the polishers improve the quality of margins and surface gloss.
Diamond Instruments
Multiple layered diamond instruments have a uniform coverage of natural diamond on different levels, especially at the all-important tip. New diamond grits with sharp edges will, therefore, be exposed for use during procedures as the outer layer wears.
10 + 4
BUY 10 - GET 4 FREE* (price group 1 burs only) = Price group 1
TOP 13 UK KIT TOTALLY AESTHETICS KIT By Dr. Monik Vasant REF 60023603 Now updated to include new products from the Diatech family including DIATECH® ShapeGuard
28
REF 250052AA 13 of the most popular bur patterens purchased by UK dentists for Crown and Bridge preparation, Composite contouring and Finishing. Kit contains 26 burs (2 of each)
838 009 3 838 010 4 838 012 4 838 014 4 839 010 839 012 839 014 842 014 12 845 010 4 845 012 4 845 014 4 845 016 4 845 023 5
200272AA
200273AA
200275AA
200276AA
200278AA
200280AA 200279AA
200282AA
200284AA 200283AA
200288AA
200290AA 200289AA
200291AA
200294AA 200293AA 200292AA
200295AA
X X
FGS* 845R 016 4 846 012 6 846 014 6 846 016 6 846 016 7 846 018 7
200305AA
200306AA
200309AA 200308AA
200311AA
845R 025 4
X
X
ISO 158…014
ISO 109…014
837R 012 8
200799AA
828 022 1
200211AA 200210AA
200798AA
200103AA
200105AA
200106AA
200108AA
200109AA
200111AA
200112AA
200116AA
200115AA
805 018 1.6
X X X
ROTARY INSTRUMENTS
ISO 048…026
ISO 048…022
200101AA
805 016 1.4
200267AA 200266AA
X
ISO 109…012
818 025 0.7
ISO 171…018
835 012 4
60021818 200206AA
813 018 2
ISO 158…012
X
805 014 1.4
200265AA 200264AA
805 012 0.9 200113AA
805 010 0.8
ISO 042…025
802 018 2.3
200145AA
ISO 032…018
802 016 2.3
ISO 109…010
200143AA
ISO 032…014
802 014 2.3
205015AA
835 010 4 200203AA
ISO 108…009
200141AA
ISO 032…010
802 012 2.3
200100AA
200097AA 200096AA 200095AA 200099AA 200098AA
200094AA
200090AA 200089AA 200088AA 200092AA 200091AA
200087AA
200086AA
200083AA
802 009 2.3
ISO 111…018
835 009 3 200201AA
ISO 108…008
200140AA
ISO 039…048
200079AA 200078AA
801 033
ISO 171…016
837 018 8
205014AA 200260AA 200259AA
X
ISO 111…016
835 008 3 200198AA
ISO 552…021
200138AA
ISO 039…037
ISO 038…033
ISO 038…031
ISO 225…018
ISO 225…016
ISO 225…012
ISO 225…010
ISO 019…016
ISO 019…014
200077AA
200081AA
FG MLX FG ML FG F FG XF FG UF FG Topspin
801 027
ISO 171…016
837 016 8
205013AA 200258AA 200257AA
ISO 111…014
834 021 6.8 200191AA
ISO 552…016
813 014 1.5
ISO 171…014
837 014 8
200255AA 200254AA
837 012 8
ISO 171…012
ISO 111…012
834 016 6.8 200190AA
813 010 1.5
200304AA
837 012 7 200252AA 200251AA
ISO 110…012
200137AA
205007AA
200136AA 200135AA
811 048 8
ISO 544…025
836R 014 6 200250AA 200249AA
ISO 234…026
ISO 234…020
200134AA
811 037 7
**
200819AA 200820AA
836R 012 6
830L 026 7 200189AA
830L 020 5
**
ISO 544…016
X ISO 157…014
200188AA 200187AA
ISO 234…018
200131AA
811 033 5
200243AA 200242AA
836R 010 6
ISO 157…012
200186AA
ISO 234…016
200130AA
200127AA
811 031 4.2
ISO 170…023
836R 008 6
830L 018 5
200241AA 200240AA
ISO 157…010
200184AA 200183AA
830L 016 5
ISO 170…016
836 018 6
807 018 5
200239AA 200238AA
ISO 157…008
830L 014 5
200237AA 200236AA
ISO 234…014
ISO 234…012
200126AA
807 016 4
ISO 170…014
ISO 170…012
836 016 6
200182AA
200181AA 200180AA
830L 012 4
ISO 110…018
830L 010 4
807 012 3.5
205010AA
836 014 6
205009AA 200232AA 200231AA
X 200177AA 200176AA 200179AA
ISO 234…010
200124AA
807 010 3.5
ISO 110…016
200174AA
ISO 233…016
806 016 2.5
ISO 110…014
830 016 2.7
200168AA 200167AA
200123AA
X X
801 023
ISO 170…010
836 012 6
205008AA 200230AA 200229AA
835R 014 4
200228AA 200227AA
X
ISO 110…012
ISO 233…014
806 014 2.2
200226AA
830 014 2.7
200165AA 200164AA 200166AA
ISO 019…012
X X X
801 020
ISO 113…014
835R 012 4 ISO 156…014
806 012 2.2
801 018
ISO 150…014
835R 010 4 200122AA
806 010 2.2
X X X X
801 016
ISO 150…012
FGS* ISO 233…012
ISO 019…010
X
200223AA 200222AA
830 012 2.7
200162AA 200161AA
200121AA
X X
801 014
ISO 150…010
FGS* FGXL*
ISO 156…012
ISO 233…010
ISO 019…009
ISO 010…023
X
200221AA 200220AA
835R 008 3
801 012
ISO 139…014
830 010 2.7
200160AA
200120AA
806 009 2.2
ISO 156…010
ISO 233…009
200117AA X
200219AA 200218AA
830 009 2.7
200158AA
ISO 048…030
801 010
ISO 139…012
828 030 1
200797AA
805 023 2.1
ISO 156…008
ISO 109…016
FG MLX FG ML FG F FG XF FG UF FG Topspin Head Shape Code ISO Ø 1/10 mm Head Length
200217AA 200216AA
835 016 4
200212AA
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin FGS* FGL* FGXL*
ISO 139…010
ISO 138…009
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin 801 009
200297AA 200296AA
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin Head Shape Code ISO Ø 1/10 mm Head Length
828 026 1
FGS*
835 014 4
X
837R 014 8
X
X
29
ISO 010…018
ISO 010…016
ISO 010…014
ISO 010…012
ISO 010…010
ISO 002…018
ISO 002…016
ISO 002…014
ISO 002…012
ISO 002…009
ISO 001…033
ISO 001…027
ISO 001…023
ISO 001…020
ISO 001…018
ISO 001…016
ISO 001…014
ISO 001…012
ISO 001…010
ISO 001…009
30 863 012 10 863 014 10
200560AA 200559AA 200562AA 200561AA 200564AA 200563AA
FGS* 868 014 8 873 014 2 874 008 3 874 010 2 874 012 2 877 010 6 877 012 6 877K 012 6 877K 014 6
200602AA
X 200604AA
877K 018 6 878 010 8 878 012 8 878 014 8 200619AA
877K 021 6 200617AA 200616AA
862 012 8
ISO 249…016
ISO 200…018
200406AA
862 014 8
X
200414AA
200413AA
855 010 6
200486AA
200403AA 200402AA 200405AA 200404AA
ISO 197…012
ISO 197…010
ISO 164…008
200363AA
200362AA
200762AA 200761AA
200360AA
205031AA 200358AA 200357AA ISO 164…014
ISO 164…016
205029AA 200355AA 200354AA ISO 164…012
849 009 4
200551AA 200550AA 200549AA 200553AA 200552AA
FGS* FGXL*
ISO 289…014
856L 018 11
ISO 200…016
200401AA
205027AA 200351AA 200350AA ISO 164…010
848R 016 10
200485AA
200398AA 200397AA 200400AA 200399AA
200408AA 200407AA
853 008 3.5
ISO 249…014
ISO 199…018
852 016 6
205060AA
200471AA 200470AA 200469AA
852 014 6
200548AA 200547AA
ISO 249…012
852 012 6
ISO 289…012
862 010 8 200544AA 200543AA 200546AA 200545AA
856L 018 10
ISO 289…010
ISO 199…018
852 010 6 200396AA
200348AA 200347AA 200346AA
ISO 219…016
848L 018 12
200615AA 200614AA
860 014 5
205059AA 200468AA 200467AA 200466AA
856L 016 10
ISO 249…010
ISO 199…016
851 016 8 200391AA
200345AA 200344AA 200343AA
ISO 219…012
200342AA
848 031 10
200540AA 200539AA 200542AA 200541AA
200465AA 200464AA
ISO 199…014
851 012 8 200390AA
ISO 199…014
848 023 10
ISO 297…021
ISO 247…014
200462AA
ISO 199…012
850N 014 10 200389AA
200760AA 200759AA
848 018 10
200611AA 200610AA
877K 016 6
200531AA 200530AA 200532AA
860 012 6.5
ISO 297…018
ISO 248…012
856L 014 10
200609AA 200608AA
860 012 5 200529AA
856L 012 10
ISO 297…016
859 024 10
200461AA
856 025 8
ISO 245…012
ISO 198…025
ISO 197…025
ISO 198…021
ISO 200…018
848 016 10
200526AA 200525AA 200527AA
856 025 7 200864AA
205057AA
205055AA 200457AA 200456AA 200455AA
205053AA 200454AA 200453AA 200452AA 60019346
850L 018 12 200388AA
848 014 10
ISO 297…014
859 021 10
ISO 166…024
ISO 166…021
X
200520AA 200519AA 200522AA 200521AA
859 018 10 200518AA
856 021 9
ISO 297…012
ISO 288…012
ISO 166…018
ISO 198…018
200338AA 200337AA
848 012 10
200606AA 200605AA
876 010 5
200592AA
859 016 10
200514AA 200513AA 200517AA 200516AA
856 018 9
205052AA 200451AA 200450AA 200449AA 60019345
ISO 200…016
200336AA
205023AA 200335AA 200334AA ISO 198…018
ISO 199…023
205021AA 200333AA 200332AA ISO 199…018
847R 018 8
ISO 288…010
859 014 10
200590AA 200589AA
ISO 166…016
200387AA 200386AA
850L 016 12
200512AA
X
ISO 287…010
ISO 198…018
200383AA
205039AA
205037AA 200382AA 200381AA 200380AA
200327AA 200326AA 200325AA
200330AA 200329AA 200328AA
200324AA
847R 016 8
200585AA
859 014 9
856 018 8
200448AA 200447AA 200446AA
856 016 9
200584AA
ISO 166…014
X
60019344
ISO 198…016
ISO 198…016
205035AA 200379AA 200378AA 200377AA
850 023 10
200509AA 200508AA 200511AA 200510AA
200443AA 200442AA 200441AA
ISO 197…016
ISO 199…016
ISO 199…014
ISO 199…012
200315AA 200314AA
847 028 8
ISO 534…012
859 012 10
205049AA 200445AA 200444AA
856 016 8
200440AA 200439AA 200438AA
850 018 8
200583AA
X
ISO 166…014
856 016 7
200930AA
859 010 10 ISO 166…012
ISO 166…010
205033AA 200376AA 200375AA
200374AA 200373AA
850 018 10
200507AA 200506AA
858 016 8
847 025 8
ISO 534…010
X 856 014 9
200503AA 200502AA 200505AA 200504AA
ISO 198…014
200372AA 200371AA
ISO 196…025
200313AA
X
847 018 8
200580AA
X
850 016 10
ISO 535…008
858 014 8 200437AA 200436AA
850 014 10
847 016 8
ISO 162…014
ISO 165…016
ISO 198…014
850 012 10
200499AA 200498AA
856 014 8
200435AA 200434AA
ISO 198…012
200366AA 200365AA
ISO 196…016
847 014 8
ISO 198…014
ISO 165…014
856 012 8
200433AA
ISO 197…016
200364AA
FG MLX FG ML FG F FG XF FG UF FG Topspin
847 012 8
200921AA
864 014 12
200577AA
863 016 10
200575AA
858 012 8
200495AA 200494AA 200497AA
FGS*
ISO 251…014
856N 016 8
200573AA 200572AA
X
ISO 165…012
855 016 6
200418AA
ISO 197…014
849 025 4
200491AA 200490AA 200493AA 200492AA
855 014 6
200417AA 200416AA 849 016 4
205070AA
Head Shape Code 856N ISO Ø 1/10 mm 014 Head Length 8
846R 016 6
ISO 250…016
FGS*
ISO 198…016
ISO 198…014
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin X
200480AA
200477AA 200476AA
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin FGS* FGL* FGXL*
ISO 250…014
ISO 250…012
FG MLX FG ML FG F FG XF FG UF FG Topspin
846 023 7
200569AA 200568AA 200567AA 200570AA
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin
ISO 196…012
ISO 196…009
ISO 553…016
ISO 174…018
ISO 173…031
ISO 173…023
ISO 173…018
ISO 173…016
ISO 173…014
ISO 173…012
ISO 546…018
ISO 546…016
ISO 172…028
ISO 172…025
ISO 172…018
ISO 172…016
ISO 172…014
ISO 172…012
ISO 545…016
ISO 171…023
ROTARY INSTRUMENTS
Head Shape Code ISO Ø 1/10 mm Head Length 849 012 4
855 012 6
X
856XL 016 12 856XL 018 12
X
862 016 8
ISO 578…007
ISO 262…007
838M 007 2.4 889M 007 2.4
200976AA
200977AA
860 012 10 864 014 12 ISO 508...021
ISO 508...018
ISO 508...018
856P 018 8 856P 021 8 878KP 018 8 878KP 021 8
215615AA 215614AA
215618AA 215617AA
X
215609AA
379 023 4.2 392 016 6 392 016 8 392 018 8
200053AA
909 040 1.5
6054 018 6
909 045 1.5
6055 018 8
**
909 055 2
ISO 257…016
200691AA
200693AA 200692AA 60022504
X
205094AA
200696AA 200695AA 200694AA
881 012 8 881 014 8
X
ISO 141…014
ISO 141…012
ISO 141…010
ISO 140…014
ISO 140…012
ISO 299…021
ISO 299…018
ISO 299…016
ISO 299…014
ISO 299…012
ISO 290…016
ISO 290…014
ISO 290…012
ISO 298…021
ISO 298…018
ISO 298…016
ISO 298…014
ISO 298…012
ISO 298…010
ISO 289…016
ROTARY INSTRUMENTS
** ISO 068…055
881 010 8
200005AA 200004AA 200007AA 200006AA
200757AA 200756AA
ISO 6056…018
**
205093AA
X
ISO 068…045
880 014 6
200071AA 200070AA
6053 018 10
200754AA 200753AA
X ISO 6055…018
200684AA 200683AA
X
200069AA 200068AA
905 031 3.1
ISO 068…040
205092AA 200680AA 200679AA
X
200752AA 200751AA
ISO 017…031
205091AA 200675AA 200674AA
880 012 6
ISO 6054…018
200745AA 200744AA
ISO 017…027
205089AA 200671AA 200670AA 200669AA
879K 021 10
200065AA 200064AA
6052 018 8
ISO 6053…018
905 027 2.9
200063AA 200062AA
6051 018 6
200742AA 200741AA
905 023 2.7
ISO 6052…018
ISO 017…023
879K 018 10
200061AA 200060AA
392 021 10
200738AA
899 027 7
ISO 6051…018
200664AA
205088AA 200668AA 200667AA
200660AA
879K 016 10
200059AA 200058AA
898 016 11
ISO 033…027
879K 014 10
200655AA
205085AA
879K 012 10
200737AA
ISO 213…016
ISO 894…009
ISO 211…018
200654AA 200653AA 200652AA
200651AA 200650AA 60022503
205084AA
879 016 10
ISO 465…021
200736AA
889 009 3.5
ISO 465…018
200733AA 200732AA 200734AA
886K 018 9.5
ISO 465…016
886 016 10 200730AA
205103AA
ISO 131…016
ISO 131…014
205082AA 200645AA 200644AA 200643AA
205080AA 200642AA 200641AA 200640AA
879 014 10
200056AA
390 014 3 200051AA 200050AA
379 023 5
ISO 465…016
205102AA 200726AA 200725AA 200724AA
200723AA 200722AA 200721AA
886 014 10
200048AA 200047AA
ISO 270…014
ISO 277…023
ISO 131…012
ISO 130…014
205078AA 200639AA 200638AA 200637AA
200636AA 200635AA 200634AA
200633AA 200632AA
879 012 10
200044AA 200043AA 200046AA 200045AA
200039AA 200038AA 200037AA 200041AA 200040AA 205005AA
200034AA
886 012 10
ISO 508...018
379 018 3.5
878K 021 8
215606AA
379 016 3.5
TAPERED SIZES WITH PIN
885 014 8 200719AA 200718AA
200715AA 200714AA 200713AA
X
ISO 277…023
ISO 277…018
ISO 130…012
X
878K 018 8
200036AA
379 014 3
200033AA
885 012 8
200711AA 200710AA
ISO 129…012
200620AA
200631AA 200630AA
FG MLX FG ML FG F FG XF FG UF FG Topspin
878K 016 8
ISO 251…014
ISO 277…016
884 012 6
200705AA 200704AA
ISO 142…014
ISO 142…012
X
60013776
368 023 5
200030AA 200029AA 200031AA
200702AA
205096AA
882 014 10
878K 014 8
ISO 250…012
FGS* ISO 277…014
882 012 10
200701AA 200700AA
ISO 141…016
X
200025AA 200024AA 200026AA
ISO 257…023
X 205095AA
FGS* FGXL* ISO 257…020
200699AA 200698AA 200697AA
FGS* FGL* FGXL* 878K 012 8
60013866
368 020 5
200011AA 200010AA 200013AA 200012AA
ISO 257…018 881 016 8
878K 010 8
200016AA 200015AA 200014AA 200018AA 200017AA
368 018 4
200009AA
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin 878 016 8
ULTRA FINE GRIT
ISO 001…009
801M 007 0.6
200975AA
MICRO BURS
Head Shape Code ISO Ø 1/10 mm Head Length
FG MLX FG ML FG F FG XF FG UF FG Topspin Head Shape Code ISO Ø 1/10 mm Head Length
368 016 3.5
6056 018 10
X
DIATECH Burs
Pack contains 5 burs
31
MEET THE TEAM UK OFFICE - SUSSEX Debi Boynton 07764 327 425 North West (Scotland - Postcodes: DG, FK, G1 – G8 , KA, ML, PA, PH)
Mark Allen
Nic Coomber
07787 570 517 Managing Director
01444 235 486 - Ext 226 National Account Manager & Marketing Strategist
Nick O’Keeffe
Helen Chart 01444 235 486 - Ext 227 Finance & Office Manager
Sue Robins
07889 227 424 North East (Scotland - Postcodes: AB, DD, EH, HS, IV, KW, KY TD, ZE)
Emma Gilks
Shah Monnan
00353 8641 35766 Ireland
07906 749 682 West Midlands & North Wales
Andrew Miller
Kelly McCormack
Louise Fish
07788 583 057 South Wales & West Country
07818 424 210 North, West & Central London
07788 146 130 South London & South Coast
Alicia Franks
005029 09.19
*Free stock supplied by dealer unless stated otherwise.
005835 06.20
07712 407 071 Essex & East London
01444 235 486 - Ext 223 Office Administrator
All promotional offers valid to 30.09.2020
© 2020 COLTENE Printing errors mistakes and changes reserved.
Chris Nolan
07786 965 019 East Midlands
T 0800 254 5115 | info.uk@coltene.com | www.coltene.com COLTENE Limited, The President Suite A, Kendal House, Victoria Way, Burgess Hill, West Sussex RH15 9NF