2025 Wood Price Book (April2026)

Wood Profile & Prices 2025

1

To Our Valued Customers, Cal Door & Drawer takes pride in delivering a quality product on time. In order to ensure this, we have automated all of our notifications. ORDER CONFIRMATIONS: Order confirmations will be emailed to you. Once your order has been placed order confirmations will be emailed the next business day. We have the ability to store as many email addresses as you need. You have until 12:00PM of that business day to advise us of any errors on our part due to data entry. Once order(s) are in production, any cancellation or changes on your part will be subject to charges based on materials already cut. ANY MISC or rush order shipping in 5 days or less; no changes can be made unless there was an entry error! SHIPPING NOTIFICATIONS: Shipping notifications will be emailed the day your order ships. Information included on this is your job #, job name, truck route or tracking information along with carrier. Due to the short lead times, all order(s) placed are processed for manufacturing the same day. The following day all orders processed are in production. There are hundreds of orders which leads to thousands of line items entered daily. Please be sure to review your order confirmations when you receive them. By doing this, it will save time and cost for any potential errors. Thank you

Edward J. Rossi

DOOR & DRAWER FRONTS PRICING Credit Terms & Delivery Information

4

Warranty & Care Guidelines

5

Maine & Vermont without Rope Molding

139-142

2 1/2” Mitered Frame Profiles

143-147

Mitered Frame Profiles with Rope Molding

147

Inset & VP Panel (veneer)

148

Ordering Information & Guidelines

6-7

Cope ‘N Stick Solid Standard Series

8-23

Cope ‘N Stick Solid Premier Series

24-31

Cope ‘N Stick Executive Series

32-43

Cope ‘N Stick Desert Series

44-45

Cope ‘N Stick Solid Applied Molding Series

46-51

Mitered 2 1/4” Solid Series

52-57

Mitered 2 1/2” Solid Series

58-59

Mitered 3” Solid Series

60-63

Mitered 2 1/4” Inset Series

64-69

Mitered 2 1/2” Inset Series

70-71

Mitered 3” Inset Series

72-75

Mitered Solid Applied Molding Series

76-76

Mitered Inset Applied Molding Series

78-79

Custom Doors

182

Mitered Solid Rope Molding Series

80-83

Custom Valances

183

3/4” Thick Veneer Edge Banded Doors

84

Open Louver Doors

184

3/4” Thick Veneer Edge Banded Echo Wood Panels

85

Large and Small Closed Louver Doors

185

Cope ‘N Stick French Lite

86

Radius Doors

Cope ‘N Stick Applied Molding French Lite

87

Mitered French Lite

88

Mitered Applied Molding French Lite

89

Solid Panel Profiles

149-150

Large Panel Profiles (recommended for applied moldings) 151 Applied Moldings with matching Mullions

152-153

Designer Standard Panel Solid Drawer Fronts

154-155

Routed One Piece Solid Drawer Fronts

156-157

Solid Drawer Fronts with Rosewood Outside Edge 3-Piece Solid Drawer Fronts Solid Drawer Fronts with Applied Molding

158 159 160-161

SIZE CHARTS Size Charts

162-181

CUSTOM DOORS

186-187

ARCHITECTURAL MOLDINGS Base Molding

188-191

Specialty French Lite Mullions

90-93

Crown Molding & Linear Stock

192-201

Designer Standard Panel Solid Drawer Fronts

94-97

Window & Case Molding

202-203

98-99

Routed Drawer Fronts

Scribe, Shoe, Inside & Outside Corner

204-205

Solid Drawer Fronts with Rosewood Outside Edge

100-101

Fluted Columns

206-207

3-Piece Solid Drawer Fronts

102-103

Applied Moldings (moldings only)

208-211

Solid Drawer Fronts with Applied Molding

104-106

OPTIONS Wood Door Options, Specials & Specifications

MATERIALS Standard Wood Materials

107-119

PROFILES

TABLE OF CONTENTS

TABLE OF CONTENTS

Wood Material Specifications

212 213-215

NEW DOOR STYLES

Standard Outside Edge Profiles

120-124

Rosewood Outside Edge Profiles

125

Standard Cope ‘N Stick Inside Edge Profiles

126-127

Premier Cope ‘N Stick Inside Edge Profiles

128

Cope ‘N Stick Specialty V-Groove

129

Cope ‘N Stick Executive Series Profiles

130-135

Cope ‘N Stick Desert Series Profiles

136-137

3/4” Thick Veneer Edge Banded Doors

216

Echo Wood Panels

216

3/4” Thick Veneer Edge Banded Echo Wood Panels

217

CNS with Applied Molding Series

218-229

MP-280 Miter Series

230-233

ORDER FORMS & INDEX

Delaware Series / Mitered Profiles

138

Order Forms

234-235

Delaware Series

139

Wood Index

236-237

3

Credit Terms & Delivery Information

Credit Terms: A complete and current credit application must be submitted before any terms of payment will be authorized. Without a current signed credit application, sales terms will be CIA (Cash In Advance). Account terms and credit limit will be established based on credit history, bank information and sales volume. Open account terms can take up to two weeks to process. All orders for new customers and inactive accounts will require pre-payment until credit terms have been established. If orders exceed the established credit limit, a deposit may be required. A current, signed resale card must be on file or sales tax will be charged. Cal Door & Drawer will only accept check payments by fax or email (not regular mail). Checkwriter is a program that allows you to fax or email your check for payment, rather than mailing it. For more information please contact our credit department.

Credit Card Transactions:

If you elect to pay with credit or debit card, there will be a 2.5% convenince fee added to your transaction. We currently accept Visa, Master Card, American Express and Discover. Credit card transactions require a completed credit card authorization form. This form requires copies of your drivers license and the front and back of your credit card for verification. This is required for your protection as well as ours. We do not share credit card information with anyone.

Third Party Credit Card Transactions:

All required information for standard credit card transactions apply. An additional authorization form will be required verifying total cost of job prior to production. Checkwriter and Credit Card payments must be received prior to doors being shipped.

Delivery Policy:

Handling: Handling Charge $1.00 per piece. This charge applies to all orders, whether it is will-call, delivery by our truck, Common Carrier, Fed Ex, On Trac or UPS. Will-Call: Will-call orders are to be picked up at our manufacturing facility @ 1800 Abbott Street, Salinas, CA 93901. Will-call orders are to be picked up from 7:30 am - 3:00 pm, Monday thru Friday. Orders that were originally scheduled for will-call cannot be changed to delivery on our truck without authorization. Our Truck: All shipments delivered on our truck in California will be charged a $100.00 delivery fee. Arizona and Nevada shipments delivered on our truck will be charged a $150.00 delivery fee. Our trucks deliver to major metropolitan areas. Shipments are determined by volume of orders in each area. Customer supplied materials that are picked up on our truck: For material amounts up to 250 feet - $150.00 pick up fee will apply. For material amounts over 250 feet - $250.00 pick up fee will apply. Re-Delivery Fee - Our Truck: Re-deliveries will be charged a second delivery fee. This fee will only be charged if the original delivery was unsuccessful between the hours of 7:00am - 5:00pm on your delivery date.

Fed Ex, On Trac & UPS: Orders of 12 pieces or less, or $300.00 or less, are subject to shipment via Fed Ex, On Trac or UPS. Customer is responsible for all packaging materials and Fed Ex, On Trac or UPS charges.

Common Carrier: Orders exceeding 12 pieces are subject to being shipped via Common Carrier and assessed a pallet fee. Customer is responsible for all packaging materials and freight charges. Fed Ex, On Trac, UPS & Common Carrier Claims: Any damage to outer packaging must be noted on the bill of lading and brought to the attention of the carrier. Take pictures of all damaged exterior packages and keep all packaging material. Photos of damaged product and packaging are required to file a claim. Contact your customer service representative immediately and submit all information in order to file a claim. Do not throw away product or packaging until claim has been resolved. Sending us a photo only of a damaged door is insufficant information. We cannot file a claim unless you have followed the guidelines listed above.

4

Warranty & Care Guidelines

Warranty:

Cal Door & Drawer manufactures and ships unfinished wood products nationwide. Once our products are received it is impossible for us to monitor the conditions under which they are kept. Changes in temperature and/or humidity can cause wood to warp, twist or crack within hours. Our warranty is limited to the replacement of door, drawer fronts, molding and accessories as manufactured by Cal Door & Drawer. Our liability is limited to the net invoice price of doors, drawer fronts, molding & accessories as sold by us. We provide special handling instructions with every order to minimize any warping, twisting or cracking due to conditions beyond our control. Cal Door & Drawer acknowledges warping, swelling, twisting or cracking is a natural occurrence in unfinished wood products and not a manufacture defect. Request for warranty can be reviewed for up to 30 days. Certain door styles will not be warranted under any circumstances. A signed disclaimer will be required prior to order being manufactured. Paint Grade Materials: Solid Paint Grade Doors & 5-Piece Drawer Fronts: No Warranty for PG Poplar Frame with MDF Panel. Poplar is known to warp and/or twist. No Warranty for painting Solid Maple Frame & Panel or any other solid wood material. We recommend PG Maple Frame with MDF Panel for the most stability against warping and twisting. Inset Paint Grade Doors & 5-Piece Drawer Fronts: No Warranty for PG Poplar Frame with MDF Panel. Poplar is known to warp and/or twist. No Warranty for painting any Solid Wood Frame and/or Plywood Panel. We recommend PG Maple Frame with MDF Panel for the most stability against warping and twisting. Paint Grade Solid & Routed Drawer Fronts: No Warranty on painting Solid Wood Drawer Fronts. We recommend and warranty MDF Solid Drawer Fronts. All products must be inspected upon receipt. Our guarantee covers the replacement of our product in an unfinished state and in good condition as originally delivered, F.O.B. our factory. We are not responsible for any other costs. Any variation from our normal construction specifications is not guaranteed, i.e. reducing the thickness of the panel or frames. A warp or twist of 3/16 of an inch is not considered a defect. A twist is measured by placing the face of the door against a true plane surface. Doors are manufactured to the nearest 1/16 of an inch. Cal Door & Drawer will not be held responsible for delays caused by factors beyond our control, i.e., obstruction or blockage of usual routes of transportation, unavoidable accidents, riots, natural disasters, vehicle shortages, prevention of labor, power shortages or lack of materials. There are no other warranties of any kind expressed or implied. All warranty claims must be authorized by a Cal Door & Drawer representative. By sending email photos to your Cal Door & Drawer representative, this will expedite the process.

Product Care Guidelines: All wood species by nature will expand and contract. All wood products should not be subject to abnormal heat, cold, extreme dryness or humid conditions. To preserve the quality of our unfinished wood products we strongly recommend sealing and finishing of doors, drawer fronts and moldings in a timely manner. We recommend all wood products to be treated with a pre-sealer, especially when using medium to dark finishes to prevent blotchy or uneven finishing. Cal Door & Drawer is not responsible for damaged doors caused by finishing. You will need to perform extra sanding steps when using darker stains and/or glazing applications. Completely finish all pieces on front, back, top, bottom and all cutouts. Under no circumstances should unfinished millwork be delivered to a job site that is under construction and open to the natural elements. We recommend that prior to delivering cabinets/doors to job site, all windows and exterior doors must be in place. Temperature of the job site should be at an occupancy level condition, prior to cabinet/door installation. All drywall and plaster should have had at least 2 weeks to dry prior to cabinet/door installation. Cal Door & Drawer will not be held responsible for damage due to job site conditions.

5

Ordering Information & Guidelines

Ordering Procedures: Orders must be submitted as FINISHED DOOR SIZE only. An order confirmation will be emailed to you the next business day. Orders may be faxed, emailed, or can be placed online 24 hours a day. We request all orders to be placed on a Cal Door & Drawer order form. We can accept your computer generated cut lists as long as you complete all the details of the order form except for sizes. When sending in computer cut lists it is the customers responsibility to highlight and separate all different materials, door styles, and details i.e. glass doors, french lites, lazy susan and wainscot panels etc. Special instructions should be clearly communicated in writing at the time the order is placed. Standard lead time is 7 to 14 working days. No changes can be made once an order has been placed and confirmed. Specialty doors require a CAD or detailed drawing. Lead time on specialty doors will be given when CAD drawings are approved. Usually 2-4 weeks. You will always receive an order confirmation and ship date. If you do not receive an order confirmation within 24 hours please notify your Customer Service Representative. Do not resend your order without speaking to your Customer Service Representative first, as this can and will lead to duplicate orders. If you are requested by your Customer Service Representative to resend an order please indicate on the top of the order or in special instructions that this is a RESENT ORDER - DO NOT DUPLICATE.

Online Orders:

A one time registration is required when ordering online. Go to www.caldoor.com. Click on log in then enter in your email address and password (first time users need to register). Go to place a new order and submit. It is recommended that you print a copy of order for your records. You will receive an email confirmation that your order was received by the office as follows: "Thank you for your order, a quote or confirmation will follow." If this confirmation is not received contact our Customer Service Department immediately. Do not resubmit another order without calling and speaking to your Customer Service Representative first. If you are requested by your Customer Service Representative to resend an order please indicate in special instructions that this is a RESENT ORDER - DO NOT DUPLICATE.

Faxed in Orders:

Please fax order in only once to avoid duplicate orders. If you receive a fax transmission error, contact our Customer Service Department to verify if order was received. If you are requested by your Customer Service Representative to resend an order please indicate on the top of the order form or in special instructions that this is a RESENT ORDER - DO NOT DUPLICATE.

Phoned in Orders:

We take and read back all sizes "width x height". When your order is read back, you are responsible for verifying that the sizes and specifications are correct. Any mistake will be the customers responsibility. We strongly suggest orders be placed by fax, email or online to avoid read back mistakes.

Quotes:

Please indicate on top of order form or in special instructions "QUOTE ONLY". Generally most quotes are done the same day as received. If it is a special or large request it may take longer. Quotes are valid for 30 days from receipt. General Pricing: All prices are per square foot, figured to the nearest 1/100th of an inch. Minimum invoice charge is $25.00. Prices are subject to change without notice.

Sizing:

We add 1/8" on the width and height to all sizes. This allows us to oversize 1/16" all the way around which is removed during the manufacturing process to achieve a cleaner edge cut. Doors are manufactured to the nearest 1/16 of an inch.

Exact Sizing: 6

If tighter tolerances are required, order Exact Size and we will manufacture to the nearest 1/32 of an inch: add 10% to sq. ft. price.

Customize Your Doors Cal Door & Drawer offers a large variety of profile options to allow you to customize your doors to better fit your needs. We offer an extensive amount of standard profiles for no additional charge. An additional charge will apply to some profiles that require more sanding or additional manufacturing time. Any additional charges are clearly noted in our price book. Custom profiles are available, a CAD or detailed drawing required.

Ordering Information & Guidelines

No Shape: Doors can be ordered No Shape where we leave the door 1/8" oversized width and height. We also recommend that you order your doors 1/16" oversized either width or height. This will allow for minor trimming and fitting. Our experience tells us that if you submit a completed Cal Door & Drawer order form (fax, email or online) this will avoid errors, saving you time and money.

Width Top Rail

Panel Panel

Center Rail

Center Stile

Height

Panel

Right Stile

Left Stile

Panel

Panel

Bottom Rail

Inside Edge Detail width Panel Reveal Outside Edge Detail Flat Spot Door Thickness

Face Reveal

Finger Pull

Panel Raise

Panel Profile

Back Cove Cut

7

Cope ‘N Stick Solid Standard Series 8

Revere

Lincoln

Cut for Glass Revere 2 1/4” S&R

Lincoln 2 1/4” S&R

MDF 13/16" Thick

12.50

PG Poplar Frame with MDF Panel

Materials

Solid Drawer Fronts

Revere 2 1/4” S&R

Lincoln with Center Stile 2 1/4” S&R

15.50

10.25

13.00

10.00

12.50

15.50

10.25

13.00

10.00

PG Alder Frame with MDF Panel

13.25

16.50

11.25

13.75

11.25

PG Maple Frame with MDF Panel

14.00

17.50

11.75

14.75

13.00

PG Maple Frame & Panel

16.50

20.25

13.00

16.25

13.00

Alder - Select

16.50

20.25

13.00

16.25

13.00

Alder - Rustic

18.50

23.00

14.50

18.25

14.50

Beech - Select

16.50

20.25

13.00

16.25

13.00

Cherry - Select

22.75

28.25

19.25

24.00

21.50

Cherry - Rustic

25.50

31.50

21.75

27.00

24.00

Hickory - Select (Calico)

22.00

27.50

17.75

22.25

18.50

Hickory - Rustic (Calico)

24.50

30.75

20.00

25.00

20.50

Mahogany, African (Flat Sawn)

31.25

39.25

24.00

30.00

24.75

Mahogany, African (Ribbon)

31.25

39.25

24.00

30.00

24.75

Maple-Natural

17.75

22.25

13.00

16.50

13.00

Maple - Select

20.00

25.00

14.00

17.75

17.75

Maple - Rustic

22.75

28.50

16.25

20.00

20.25

Pine - Knotty

19.25

24.00

14.00

17.50

17.75

Red Oak - Select

15.75

19.75

13.00

16.25

13.00

Sapele - (Flat Sawn)

31.50

39.50

24.25

30.25

25.00

Sapele - (Ribbon)

31.50

39.50

24.25

30.25

25.00

Walnut - Select

33.25

41.50

27.25

34.25

26.25

Walnut - Rustic

35.50

44.25

27.50

34.00

26.75

White Oak - Select

26.75

33.25

22.75

27.00

22.50

White Oak - Rustic

24.50

30.00

19.75

25.00

20.50

White Oak - Rift (Straight Grain)

33.25

41.50

27.25

34.25

26.25

White Oak - Quarter Sawn

31.50

39.50

24.25

30.25

25.00

Standard Profiles

Revere

#2 Inside Edge, C Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 2 1/4” Stiles & Rails

Lincoln

#2 Inside Edge, C Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge, 2 1/4” Stiles & Rails and a 2 1/4” Center Stile Profiles

Profile Options

Profile Page

Standard Inside Edges

#2, 3, 4, 5, 9, 10, 11, 19, 20, 21, 22, 23, 27 & 28

126-127

Standard Solid Panels

C, E, F, H, I, J, L, R, S, Small S, U, Y, Z & Small Z

148-149

A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price

148-150

Premium Solid Panels

M Panel: add 20% to sq. ft. price

148

Large Solid Panels (molding not included)

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S : add 10% to sq. ft. price

151

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 2 1/4” Stiles & Rails: standard 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price

120-124

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front 1 3/8”, 1 3/4” or 2” Rails (must specify) Non-standard Rail sizes: call for pricing

125

Option Charge $10.00 Per Piece

4” Stiles & Rails: add 35% to sq. ft. price

Cope ‘N Stick Solid Standard Series

Door Style

Non-standard Stile & Rail sizes: call for pricing Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

Standard Solid Panels

162-163

7/8” Thick: add 10% to sq. ft. price

Premium Solid Panels

162-163

1” Thick: add 30% to sq. ft. price

Large Solid Panels

172

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

9

Cope ‘N Stick Solid Standard Series 10

Liberty

Juliano

Tiffany

Palermo

Cut for Glass Liberty, Juliano & Tiffany 2 1/4” S&R

Palermo 2 1/4” S&R

MDF 13/16" Thick

14.50

PG Poplar Frame with MDF Panel

Materials

Solid Drawer Fronts

Liberty, Juliano & Tiffany 2 1/4” S&R

Palermo 2 1/4” S&R

16.75

11.50

12.50

10.00

14.50

16.75

11.50

12.50

10.00

PG Alder Frame with MDF Panel

15.25

17.50

12.25

13.25

11.25

PG Maple Frame with MDF Panel

15.75

18.25

13.00

14.00

13.00

PG Maple Frame & Panel

19.00

21.00

14.25

15.25

13.00

Alder - Select

19.00

21.00

14.25

15.25

13.00

Alder - Rustic

21.50

23.75

16.00

17.25

14.50

Beech - Select

19.00

21.00

14.25

15.25

13.00

Cherry - Select

24.75

27.00

20.25

21.50

21.50

Cherry - Rustic

28.00

30.25

23.00

24.00

24.00

Hickory - Select (Calico)

24.00

26.00

18.75

19.75

18.50

Hickory - Rustic (Calico)

26.00

29.25

21.00

22.25

20.50

Mahogany, African (Flat Sawn)

33.50

35.50

25.25

26.25

24.75

Mahogany, African (Ribbon)

33.50

35.50

25.25

26.25

24.75

Maple-Natural

19.75

22.00

15.25

16.50

13.00

Maple - Select

22.25

24.25

15.75

17.00

17.75

Maple - Rustic

24.75

27.50

17.25

18.25

20.25

Pine - Knotty

21.50

23.50

15.00

16.25

17.75

Red Oak - Select

18.00

20.00

13.25

14.25

13.00

Sapele - (Flat Sawn)

33.75

35.75

25.25

26.75

25.00

Sapele - (Ribbon)

33.75

35.75

25.25

26.75

25.00

Walnut - Select

35.50

37.75

26.50

28.00

26.25

Walnut - Rustic

38.00

40.25

28.25

29.75

26.75

White Oak - Select

29.00

31.50

22.25

24.00

22.50

White Oak - Rustic

27.00

29.25

20.75

22.25

20.50

White Oak - Rift (Straight Grain)

35.50

37.75

26.50

28.00

26.25

White Oak - Quarter Sawn

33.75

35.75

25.25

26.75

25.00

Standard Profiles

Juliano

#2 Inside Edge, C Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 2 1/4” Stiles & Rails

Tiffany Palermo Profiles

Profile Options

Profile Page

Standard Inside Edges

#2, 3, 4, 5, 9, 10, 11, 19, 20, 21, 22, 23, 27 & 28

126-127

Standard Solid Panels

C, E, F, H, I, J, L, R, S, Small S, U, Y, Z & Small Z

148-149

A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price

148-150

Premium Solid Panels

M Panel: add 20% to sq. ft. price

148

Large Solid Panels (molding not included)

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S: add 10% to sq. ft. price

151

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

120-124

Stile & Rail Options

Arch Options

2 1/4” Stiles & Rails: standard

Deluxe Arch: arch on both top and bottom of door.

2 1/2” Stiles & Rails: add 10% to sq. ft. price

Deluxe Arch for Liberty, Juliano & Tiffany: add $1.50 per sq. ft.

3” Stiles & Rails: add 20% to sq. ft. price

Deluxe Arch for Palermo: add $3.00 per sq. ft.

4” Stiles & Rails: add 35% to sq. ft. price

Split Arch (2 doors): add 50% per sq. ft. (refer to drawing on page #116)

Non-standard Stile & Rail sizes: call for pricing

Split Arch doors are only available on Liberty & Juliano doors

125

Cope ‘N Stick Solid Standard Series

Door Style Liberty

Custom Arches: call for pricing (drawing or photo required) Frame Thickness

Minimum Sizing Chart for arch and deluxe arch doors

13/16” Thick: standard

Page

3/4” Thick: no upcharge

Standard Solid Panels

164-171

7/8” Thick: add 10% to sq. ft. price

Premium Solid Panels

164-171

1” Thick: add 30% to sq. ft. price

Large Solid Panels

172-173

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

11

Cope ‘N Stick Solid Standard Series with Premium Panels 12

Century

Nevada

Wyoming

Maverick

Cut for Glass Century, Nevada & Wyoming 2 1/4” S&R

Maverick 2 1/2” S&R

MDF 13/16" Thick

13.75

PG Poplar Frame with MDF Panel

Materials

Solid Drawer Fronts

Century, Nevada & Wyoming 2 1/4” S&R

Maverick 2 1/2” S&R

15.00

10.25

11.50

10.00

13.75

15.00

10.25

11.50

10.00

PG Alder Frame with MDF Panel

14.50

15.75

11.25

12.25

11.25

PG Maple Frame with MDF Panel

15.25

16.75

11.75

13.00

13.00

PG Maple Frame & Panel

18.00

19.50

13.00

14.00

13.00

Alder - Select

18.00

19.50

13.00

14.00

13.00

Alder - Rustic

20.25

22.00

14.50

15.75

14.50

Beech - Select

18.00

19.50

13.00

14.00

13.00

Cherry - Select

24.75

27.25

19.25

21.00

21.50

Cherry - Rustic

27.75

30.50

21.75

23.75

24.00

Hickory - Select (Calico)

24.25

26.25

17.75

19.50

18.50

Hickory - Rustic (Calico)

27.50

29.50

20.00

22.00

20.50

Mahogany, African (Flat Sawn)

34.50

37.75

24.00

26.75

24.75

Mahogany, African (Ribbon)

34.50

37.75

24.00

26.75

24.75

Maple-Natural

19.50

21.50

14.25

15.50

13.00

Maple - Select

22.25

24.25

14.75

16.50

17.75

Maple - Rustic

25.00

27.50

16.25

17.75

20.25

Pine - Knotty

21.00

23.00

14.00

15.25

17.75

Red Oak - Select

17.75

19.25

12.25

13.50

13.00

Sapele - (Flat Sawn)

34.75

38.00

24.25

26.75

25.00

Sapele - (Ribbon)

34.75

38.00

24.25

26.75

25.00

Walnut - Select

36.50

40.00

25.50

28.25

26.25

Walnut - Rustic

39.00

42.75

27.50

30.00

26.75

White Oak - Select

29.50

32.00

21.50

23.75

22.50

White Oak - Rustic

27.50

29.50

20.00

22.00

20.50

White Oak - Rift (Straight Grain)

36.50

40.00

25.50

28.25

26.25

White Oak - Quarter Sawn

34.75

38.00

24.25

26.75

25.00

Stile & Rail Size

Standard Profiles

Century

2 1/4” x 2 1/4”

#4 Inside Edge, V Panel, G-2 (fingerpull) or G-3 (no lip) Outside Edge

121,126,148

Nevada

2 1/4” x 2 1/4”

#1 Inside Edge, A Panel, D-3 (square) Outside Edge

120,126,150

Wyoming

2 1/4” x 2 1/4”

#24 Inside Edge, A Panel, D-3 (square) Outside Edge

120,126,150

Maverick

2 1/2” x 2 1/2”

#23 Inside Edge, G Panel, D-3 (square) Outside Edge

120,126,150

Outside Edge Options

Profile Page

Profiles Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 2 1/4” Stiles & Rails: standard 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front 1 3/8”, 1 3/4” or 2” Rails (must specify) Non-standard rail sizes: call for pricing

Profile Page

120-124 125

Option Charge $10.00 Per Piece

4” Stiles & Rails: add 35% to sq. ft. price Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Frame Thickness

DV-1 Routed Drawer Front use solid drawer front sq. ft. price + option charge per drawer front Recommended to match Century door style (refer to page #156 for profile)

Option Charge $10.00 Per Piece

13/16” Thick: standard 3/4” Thick: no upcharge

Minimum Sizing Chart for doors and 5-piece drawer fronts

7/8” Thick: add 10% to sq. ft. price 1” Thick: add 30% to sq. ft. price

Premium Solid Panels

Page 162-163

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting.

Cope ‘N Stick Solid Standard Series with Premium Panels

Door Style

Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

13

Cope ‘N Stick Solid Standard Series 14

Durango

Flagstaff

Cut for Glass

Durango (“F” Panel) 2 1/4” S&R

Flagstaff with Center Stile (“F” Panel) 2 1/4” S&R

Durango 2 1/4” S&R

Flagstaff with Center Stile 2 1/4” S&R

MDF 13/16" Thick

12.50

15.50

10.25

13.00

10.00

PG Poplar Frame with MDF Panel

12.50

15.50

10.25

13.00

10.00

PG Alder Frame with MDF Panel

13.25

16.50

11.25

13.75

11.25

PG Maple Frame with MDF Panel

14.00

17.50

11.75

14.75

13.00

PG Maple Frame & Panel

16.50

20.25

13.00

16.25

13.00

Alder - Select

16.50

20.25

13.00

16.25

13.00

Alder - Rustic

18.25

23.00

14.50

18.25

14.50

Beech - Select

16.50

20.25

13.00

16.25

13.00

Cherry - Select

22.75

28.25

19.25

24.00

21.50

Cherry - Rustic

25.50

31.50

21.75

27.00

24.00

Hickory - Select (Calico)

22.00

27.50

17.75

22.25

18.50

Hickory - Rustic (Calico)

24.50

30.75

20.00

25.00

20.50

Mahogany, African (Flat Sawn)

31.25

39.25

24.00

30.00

24.75

Mahogany, African (Ribbon)

31.25

39.25

24.00

30.00

24.75

Maple-Natural

17.75

22.25

13.00

16.50

13.00

Maple - Select

20.00

25.00

14.00

17.75

17.75

Maple - Rustic

22.75

28.25

16.25

20.00

20.25

Pine - Knotty

19.25

24.00

14.00

17.50

17.75

Red Oak - Select

15.75

19.75

13.00

16.25

13.00

Sapele - (Flat Sawn)

31.50

39.50

24.25

30.25

25.00

Sapele - (Ribbon)

31.50

39.50

24.25

30.25

25.00

Walnut - Select

33.25

41.50

27.25

34.25

26.25

Walnut - Rustic

35.50

44.25

27.50

34.00

26.75

White Oak - Select

26.75

33.25

22.75

28.00

22.50

White Oak - Rustic

24.50

30.75

20.00

25.00

20.50

Materials

Solid Drawer Fronts

Standard Profiles

Durango

#1 Inside Edge, F Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Flagstaff

#1 Inside Edge, F Panel, D-3 (square) Outside Edge, 2 1/4” Stiles & Rails and a 2 1/4” Center Stile

Profiles

Outside Edge Options

Profile Page

Standard Inside Edges

#1 & #16

126

Standard Solid Panels

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 2 1/4” Stiles & Rails: standard 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price

120-124

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front 1 3/8”, 1 3/4” or 2” Rails (must specify) Non-standard rail sizes: call for pricing

125

Option Charge $10.00 Per Piece

4” Stiles & Rails: add 35% to sq. ft. price

Cope ‘N Stick Solid Standard Series

Door Style

Non-standard stile & rail sizes: call for pricing

Frame Thickness

Minimum Sizing Chart For doors and 5-piece drawer fronts

13/16” Thick: standard 3/4” Thick: no upcharge

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

Page 162

7/8” Thick: add 10% to sq. ft. price 1” Thick: add 30% to sq. ft. price Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

15

Cope ‘N Stick Solid Standard Series 16

Camden

Cut for Glass Materials

Camden with Grooved “F” Panel 2 1/4” S&R

Camden 2 1/4”

Solid Drawer Fronts

MDF 13/16” Thick

15.75

10.25

10.00

PG Poplar Frame with MDF Panel

15.75

10.25

10.00

PG Alder Frame with MDF Panel

16.50

11.25

11.25

PG Maple Frame with MDF Panel

17.25

11.75

13.00

PG Maple Frame & Panel

19.75

13.00

13.00

Alder - Select

19.75

13.00

13.00

Alder - Rustic

22.25

14.50

14.50

Beech - Select

19.75

13.00

13.00

Cherry - Select

26.00

19.25

21.50

Cherry - Rustic

29.25

21.75

24.00

Hickory - Select (Calico)

25.25

17.75

18.50

Hickory - Rustic (Calico)

28.50

20.00

20.50

Mahogany, African (Flat Sawn)

34.75

24.00

24.75

Mahogany, African (Ribbon)

34.75

24.00

24.75

Maple-Natural

21.00

14.50

13.00

Maple - Select

23.50

14.25

17.75

Maple - Rustic

26.25

16.25

20.25

Pine - Knotty

22.50

14.00

17.75

Red Oak - Select

19.25

12.25

13.00

Sapele - (Flat Sawn)

35.00

24.25

25.00

Sapele - (Ribbon)

35.00

24.25

25.00

Walnut - Select

36.75

25.50

26.25

Walnut - Rustic

39.25

27.50

26.75

White Oak - Select

30.50

21.50

22.50

White Oak - Rustic

28.50

20.00

20.50

White Oak - Rift (Straight Grain)

36.75

25.50

26.25

White Oak - Quarter Sawn

35.00

24.25

25.00

Standard Profiles #1 Inside Edge, D-3 (square) Outside Edge, F Panel with 3/8” Beaded V-Grooves, 2” or 3” apart On or Off Center (must specify) and 2 1/4” Stiles & Rails

Camden

Profiles

Profile Options

Standard Inside Edges

#1, 2, 3, 4, 5, 9, 10, 11, 16, 19, 20, 21, 22, 23, 27, & 28

Standard Solid Panels

1/2” Thick “F” Panel (solid wood) when ordering with #1 or #16 Inside Edge 3/8” Thick “F” Panel (MDF) when ordering with #1 or #16 Inside Edge 3/8” Thick “F” Panel (solid wood or MDF) when using all other inside edges

148

Grooves

1/4” Beaded V-Groove or 3/8” Beaded V-Groove 1/8” V-Groove or 1/4” V-Groove 1/8” Square Groove

117

Groove Pattern Placement

2” or 3” apart On or Off Center: Standard 1 1/2” apart On or Off Center: add $1.00 per sq. ft. Special placement of grooves: add $2.50 per sq. ft.

117

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price

126-127

120-124

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

2 1/4” Stiles & Rails: standard

Profile Page

1 3/8”, 1 3/4” or 2” Rails (must specify) Non-standard rail sizes: call for pricing

125

Option Charge

Cope ‘N Stick Solid Standard Series

Door Style

$10.00 Per Piece

4” Stiles & Rails: add 35% to sq. ft. price Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard 3/4” Thick: no upcharge

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

Page 162

7/8” Thick: add 10% to sq. ft. price 1” Thick: add 30% to sq. ft. price Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

17

Cope ‘N Stick Inset Standard Series

Sierra

Denmark

Artesia

Sierra, Denmark & Artesia 2 1/4” S&R

Materials

Heritage

Heritage with Center Stile

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16” Thick

10.25

13.00

10.00

PG Poplar Frame with MDF Panel

10.25

13.00

10.00

PG Alder Frame with MDF Panel

11.25

13.75

11.25

PG Maple Frame with MDF Panel

11.75

14.75

13.00

PG Maple Frame & Panel

13.00

16.25

13.00

Alder - Select

13.00

16.25

13.00

Alder - Rustic

14.50

18.25

14.50

Beech - Select

13.00

16.25

13.00

Cherry - Select

19.25

24.00

21.50

Hickory - Select (Calico)

17.75

22.25

18.50

Maple - Natural*

13.00

16.50

13.00

Maple - Select

14.00

17.75

17.75

Red Oak - Select

13.00

16.25

13.00

Walnut - Select

27.25

34.25

26.25

White Oak - Select

22.75

27.00

22.50

White Oak - Rift (Straight Grain)

27.25

34.25

26.25

*Inset: Whole Piece, Face ONLY!

18

Standard Profiles #2 Inside Edge, Plywood Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 2 1/4” Stiles & Rails

Denmark

#5 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Artesia

#4 Inside Edge, Plywood Panel, G-2 (fingerpull) or G-3 (no lip) Outside Edge and 2 1/4” Stiles & Rails

Heritage

#2 Inside Edge, Plywood Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge, 2 1/4” Stiles & Rails and a 2 1/4” Center Stile

Profiles Standard Inside Edges

Profile Options #2, 3, 4, 5, 9, 10, 11, 19, 20, 21, 22, 23, 27 & 28

Profile Page

126-127

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Revere pricing for Sierra, Denmark & Artesia door styles Use Lincoln pricing for Heritage door style Refer to page #8 for pricing Available in all stocked wood species & MDF

148

3/8” Thick “VP” Panel (veneer)

Use Revere pricing for Sierra, Denmark & Artesia door styles Use Lincoln pricing for Heritage door style Refer to page #8 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 2 1/4” Stiles & Rails: standard 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price

120-124

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front 1 3/8”, 1 3/4” or 2” Rails (must specify) Non-standard rail sizes: call for pricing

125

Option Charge

Cope ‘N Stick Inset Standard Series

Door Style Sierra

$8.00 Per Piece

4” Stiles & Rails: add 35% to sq. ft. price Non-standard stile & rail sizes: call for pricing

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

162

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

162

1” Thick: add 30% to sq. ft. price

3/8” Thick “F” Panel (solid wood or MDF)

162

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

19

Cope ‘N Stick Inset Standard Series

Atlanta

Kathryn

Krystle

Atlanta, Kathryn & Krystle 2 1/4” S&R

Materials

Bergamo 2 1/4” S&R

Bergamo

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16” Thick

11.50

12.50

10.00

PG Poplar Frame with MDF Panel

11.50

12.50

10.00

PG Alder Frame with MDF Panel

12.25

13.25

11.25

PG Maple Frame with MDF Panel

12.75

13.75

13.00

PG Maple Frame & Panel

14.00

15.00

13.00

Alder - Select

14.00

15.00

13.00

Alder - Rustic

15.50

16.75

14.50

Beech - Select

14.00

15.00

13.00

Cherry - Select

20.00

21.00

21.50

Hickory - Select (Calico)

18.75

19.75

18.50

Maple - Natural*

14.00

15.00

13.00

Maple - Select

15.00

16.25

17.75

Red Oak - Select

14.00

15.00

13.00

Walnut - Select

28.75

29.75

26.25

White Oak - Select

22.00

23.00

22.50

White Oak - Rift (Straight Grain)

28.75

29.75

26.25

*Inset: Whole Piece, Face ONLY!

20

Standard Profiles

Atlanta Kathryn

#2 Inside Edge, Plywood Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 2 1/4” Stiles & Rails

Krystle Bergamo Profiles

Profile Options

Profile Page

Standard Inside Edges

#2, 3, 4, 5, 9, 10, 11, 19, 20, 21, 22, 23, 27 & 28

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Liberty pricing for Atlanta, Kathryn & Krystle door styles Use Palermo pricing for Bergamo door style Refer to page #10 for pricing Available in all stocked wood & MDF

148

3/8” Thick “VP” Panel (veneer)

Use Liberty pricing for Atlanta, Kathryn & Krystle door styles Use Palermo pricing for Bergamo door style Refer to page #10 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

126-127

120-124

Stile & Rail Options

125

Arch Options

2 1/4” Stiles & Rails: standard

Deluxe Arch: arch on both top and bottom of door

2 1/2” Stiles & Rails: add 10% to sq. ft. price

Deluxe Arch for Atlanta, Kathryn & Krystle: add $0.75 per sq. ft.

3” Stiles & Rails: add 20% to sq. ft. price

Deluxe Arch for Bergamo: add $1.50 per sq. ft.

4” Stiles & Rails: add 35% to sq. ft. price

Split Arch (2 doors): add 50% per sq. ft. (refer to drawing on page #116)

Non-standard stile & rail sizes: call for pricing

Split Arch doors are only available for Atlanta & Kathryn door styles

Center Stile: add 25% to sq. ft. price (Refer to drawing on page #111)

Custom Arches: call for pricing (drawing or photo required)

Frame Thickness

Minimum & Maximum Sizing Chart for arch & deluxe arch doors

13/16” Thick: standard

Cope ‘N Stick Inset Standard Series

Door Style

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

164-170

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

164-170

1” Thick: add 30% to sq. ft. price

3/8” Thick “F” Panel (solid wood or MDF)

164-170

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

21

Cope ‘N Stick Inset Standard Series

Shaker

Auburn

Shaker 2 1/4” S&R

Materials

Auburn with Center Stile 2 1/4” S&R

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16" Thick

10.25

13.00

10.00

PG Poplar Frame with MDF Panel

10.25

13.00

10.00

PG Alder Frame with MDF Panel

11.25

13.75

11.25

PG Maple Frame with MDF Panel

11.75

14.75

13.00

PG Maple Frame & Panel

13.00

16.25

13.00

Alder - Select

13.00

16.25

13.00

Alder - Rustic

14.50

18.25

14.50

Beech - Select

13.00

16.25

13.00

Cherry - Select

19.25

24.00

21.50

Hickory - Select (Calico)

17.75

22.25

18.50

Maple - Natural*

13.00

16.50

13.00

Maple - Select

14.00

17.75

17.75

Red Oak - Select

13.00

16.25

13.00

Walnut - Select

27.25

34.25

26.25

White Oak - Select

22.75

28.00

22.50

White Oak - Rift (Straight Grain)

27.25

34.25

26.25

*Inset: Whole Piece, Face ONLY!

22

Standard Profiles

Shaker

#1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Auburn

#1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails and a 2 1/4” Center Stile

Profiles

Profile Options

Profile Page

Standard Inside Edges

#1 or #16

126

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

1/2” Thick “F” Panel (solid wood) 3/8” Thick “F” Panel (MDF)

Use Durango pricing for Shaker door style Use Flagstaff pricing for Auburn door style Refer to page #14 for pricing Available in all stocked wood species & MDF

148

3/8” Thick “VP” Panel (veneer)

Use Durango pricing for Shaker door style Use Flagstaff pricing for Auburn door style Refer to page #14 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

2 1/4” Stiles & Rails: standard 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price

120-124

1 3/8”, 1 3/4” or 2” Rails (must specify) Non-standard rail sizes: call for pricing

125

Cope ‘N Stick Inset Standard Series

Door Style

Option Charge $8.00 Per Piece

4” Stiles & Rails: add 35% to sq. ft. price Non-standard stile & rail sizes: call for pricing Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

162

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

162

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

162

Door Specifications: All doors are minimum 2 sq. ft.

All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options)

Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options)

Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door.

Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

23

Cope ‘N Stick Solid Premier Series 24

Burgundy

Malbec

Cut for Glass Materials

Burgundy 3” S&R

Burgundy 3” S&R

with Center Stile

Solid Drawer Fronts

Malbec

with Center Stile

3” S&R

Malbec 3” S&R

MDF 13/16” Thick

17.50

22.00

12.50

15.50

10.00

PG Poplar Frame with MDF Panel

17.50

22.00

12.50

15.50

10.00

PG Alder Frame with MDF Panel

18.50

23.00

13.25

16.75

11.25

PG Maple Frame with MDF Panel

19.25

24.25

14.00

17.75

13.00

PG Maple Frame & Panel

23.00

28.50

15.25

19.25

13.00

Alder - Select

23.00

28.50

15.25

19.25

13.00

Alder - Rustic

25.75

32.00

17.25

21.75

14.50

Beech - Select

23.00

28.50

15.25

19.25

13.00

Cherry - Select

31.50

39.50

23.00

28.50

21.50

Cherry - Rustic

35.50

44.25

25.75

32.00

24.00

Hickory - Select (Calico)

30.75

38.50

21.50

26.75

18.50

Hickory - Rustic (Calico)

34.75

43.25

24.00

30.00

20.50

Mahogany, African (Flat Sawn)

43.75

54.75

29.00

36.00

24.75

Mahogany, African (Ribbon)

43.75

54.75

29.00

36.00

24.75

Maple-Natural

24.75

31.00

17.50

19.00

13.00

Maple - Select

28.25

37.25

19.50

22.00

17.75

Maple - Rustic

31.50

41.50

22.00

21.50

20.25

Pine - Knotty

27.00

33.50

16.75

20.75

17.75

Red Oak - Select

23.00

28.50

15.25

19.25

13.00

Sapele - (Flat Sawn)

44.25

55.25

29.25

36.25

25.00

Sapele - (Ribbon)

44.25

55.25

29.25

36.25

25.00

Walnut - Select

46.50

58.25

32.75

41.00

26.25

Walnut - Rustic

49.75

62.00

33.00

39.00

26.75

White Oak - Select

37.50

46.50

25.75

32.25

22.50

White Oak - Rustic

34.75

43.25

24.00

28.75

20.50

White Oak - Rift (Straight Grain)

46.50

58.25

32.75

41.00

26.25

White Oak - Quarter Sawn

44.25

55.25

29.25

36.25

25.00

Standard Profiles

Burgundy

#6 Inside Edge, E Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 3” Stiles & Rails

Malbec

#6 Inside Edge, E Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 3” Stiles & Rails and a 3” Center Stile Profiles

Profile Options

Standard Inside Edges

#6, 7, 8, 12, 17, 18, 25, & 29

Standard Solid Panels

C, E, F, H, I, J, L , R, S, Small S, U, Y , Z & Small Z

Premium Solid Panels

128

A, D, G, N, Large P, P, Small P, T, V, W & X: Add 10% to sq. ft. price

148-150

M Panel: add 20% to sq. ft. price

Large Solid Panels (molding not included)

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S: add 10% to sq. ft. price

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

Profile Page

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 3” Stiles & Rails: standard 2 1/2” Stiles & Rails: use standard 3” pricing 2 1/4” Stiles & Rails: not available

5-Piece Drawer Front Rail Options

use matching door sq. ft. price + option charge per drawer front

1 3/4” or 2” Rails (must specify) Non-standard rail sizes: call for pricing

151 120-124 125

Option Charge

Cope ‘N Stick Solid Premier Series

Door Style

$10.00 Per Piece

4” Stiles & Rails: add 15% to sq. ft. price Non-standard stile & rail sizes: call for pricing Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

Standard Solid Panels

162-163

7/8” Thick: add 10% to sq. ft. price

Premium Solid Panels

162-163

1” Thick: add 30% to sq. ft. price

Large Solid Panels

172

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

25

Cope ‘N Stick Solid Premier Series 26

Chateau

Merlot

Cabernet

Cut for Glass Materials

Chateau, Merlot & Cabernet 3” S&R

Chateau, Merlot & Cabernet 3” S&R

Solid Drawer Fronts

MDF 13/16” Thick

23.00

13.50

10.00

PG Poplar Frame with MDF Panel

23.00

13.50

10.00

PG Alder Frame with MDF Panel

24.00

14.25

11.25

PG Maple Frame with MDF Panel

25.00

15.00

13.00

PG Maple Frame & Panel

28.50

16.50

13.00

Alder - Select

28.50

16.50

13.00

Alder - Rustic

30.50

18.50

14.50

Beech - Select

28.50

16.50

13.00

Cherry - Select

37.25

24.00

21.50

Cherry - Rustic

41.00

27.25

24.00

Hickory - Select (Calico)

36.25

22.50

18.50

Hickory - Rustic (Calico)

39.25

25.25

20.50

Mahogany, African (Flat Sawn)

49.50

30.00

24.75

Mahogany, African (Ribbon)

49.50

30.00

24.75

Maple-Natural

30.50

18.50

13.00

Maple - Select

33.75

20.75

17.75

Maple - Rustic

37.50

24.00

20.25

Pine - Knotty

32.50

17.75

17.75

Red Oak - Select

28.50

16.50

13.00

Sapele - (Flat Sawn)

50.00

30.25

25.00

Sapele - (Ribbon)

50.00

30.25

25.00

Walnut - Select

52.50

35.25

26.25

Walnut - Rustic

56.00

34.00

26.75

White Oak - Select

44.00

27.25

22.50

White Oak - Rustic

40.75

25.25

20.50

White Oak - Rift (Straight Grain)

52.50

35.25

26.25

White Oak - Quarter Sawn

50.00

30.25

25.00

Standard Profiles

Chateau Merlot

#6 Inside Edge, E Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 3” Stiles & Rails

Cabernet

Profiles

Profile Options

Standard Inside Edges

#6, 7, 8, 12, 17, 18, 25, & 29

Standard Solid Panels

C, E, F, H, I, J, L , R, S, Small S, U, Y , Z & Small Z

Profile Page 128

A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price

Premium Solid Panels

148-150

M Panel: add 20% to sq. ft. price

148

Large Solid Panels (molding not included)

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S: add 10% to sq. ft. price

151

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

120-124

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft.

125

R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 3” Stiles & Rails: standard 2 1/2” Stiles & Rails: use standard 3” pricing 2 1/4” Stiles & Rails: not available

Arch Options Deluxe Arch: arch on both top and bottom of door Deluxe Arch: add $3.00 per sq. ft.

4” Stiles & Rails: add 15% to sq. ft. price

Split Arch (2 doors): add 50% per sq. ft. (refer to drawing on page #116) Split Arch doors are only available for Chateau & Merlot door styles

Non-standard stile & rail sizes: call for pricing

Custom Arches: call for pricing (drawing or photo required)

Cope ‘N Stick Solid Premier Series

Door Style

Center Stile: add 25% to sq. ft. price (refer to drawing on page #111)

Frame Thickness

Minimum & Maximum Sizing Chart for arch and deluxe arch doors

13/16” Thick: standard

Page

3/4” Thick: not available

Standard Solid Panels

164-171

7/8” Thick: add 10% to sq. ft. price

Premium Solid Panels

164-171

1” Thick: add 30% to sq. ft. price

Large Solid Panels

172-173

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

27

Cope ‘N Stick Inset Premier Series

Chardonnay

Meritage

Chardonnay 3” S&R

Materials

Meritage with Center Stile 3” S&R

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16” Thick

12.50

15.50

10.00

PG Poplar Frame with MDF Panel

12.50

15.50

10.00

PG Alder Frame with MDF Panel

13.25

16.75

11.25

PG Maple Frame with MDF Panel

14.00

17.75

13.00

PG Maple Frame & Panel

15.25

19.25

13.00

Alder - Select

15.25

19.25

13.00

Alder - Rustic

17.25

21.75

14.50

Beech - Select

15.25

19.25

13.00

Cherry - Select

23.00

28.50

21.50

Hickory - Select (Calico)

21.50

26.75

18.50

Maple - Natural*

17.50

19.00

13.00

Maple - Select

19.50

22.00

17.75

Red Oak - Select

15.25

19.25

13.00

Walnut - Select

32.75

41.00

26.25

White Oak - Select

25.75

32.25

22.50

White Oak - Rift (Straight Grain)

32.75

41.00

26.25

*Inset: Whole Piece, Face ONLY!

28

Standard Profiles

Chardonnay

#6 Inside Edge, Plywood Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 3” Stiles & Rails

Meritage

#6 Inside Edge, Plywood Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge, 3” Stiles & Rails and a 3” Center Stile Profiles

Standard Inside Edges

Profile Options

Profile

#6, 7, 8, 12, 17, 18, 25, & 29

128

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Burgundy pricing for Chardonnay door style Use Malbec door pricing for Meritage door style Refer to page #24 for pricing

148

Available in all stocked wood species and MDF 3/8” Thick “VP” Panel (veneer) Standard Outside Edges Rosewood Outside Edges

Use Burgundy pricing for Chardonnay door style Use Malbec door pricing for Meritage door style Refer to page #24 for pricing

148

Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain) 49 Standard Outside Edge Profiles

120-124

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft.

125

R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

3” Stiles & Rails: standard 2 1/2” Stiles & Rails: use standard 3” pricing

1 3/4” or 2” Rails (must specify)

4” Stiles & Rails: add 15% to sq. ft. price

Non-standard rail sizes: call for pricing

Cope ‘N Stick Inset Premier Series

Door Style

Option Charge $8.00 Per Piece

2 1/4” Stiles & Rails: not available Non-standard stile & rail sizes: call for pricing Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: not available

1/4” Plywood or 1/4” MDF

162

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

162

1” Thick: add 30% to sq. ft. price

3/8” Thick “F” Panel (solid wood or MDF)

162

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

29

Cope ‘N Stick Inset Premier Series

Bordeaux

Chablis

Bordeaux & Chablis 3” S&R

Materials

Zinfandel

Zinfandel 3” S&R

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16” Thick

13.50

14.50

10.00

PG Poplar Frame with MDF Panel

13.50

14.50

10.00

PG Alder Frame with MDF Panel

14.25

15.25

11.25

PG Maple Frame with MDF Panel

15.00

16.25

13.00

PG Maple Frame & Panel

16.50

17.75

13.00

Alder - Select

16.50

17.75

13.00

Alder - Rustic

18.50

20.00

14.50

Beech - Select

16.50

17.75

13.00

Cherry - Select

24.00

24.75

21.50

Hickory - Select (Calico)

22.50

23.25

18.50

Maple - Natural*

18.50

19.50

13.00

Maple - Select

20.75

22.00

17.75

Red Oak - Select

16.50

17.75

13.00

Walnut - Select

35.25

35.25

26.25

White Oak - Select

27.25

28.25

22.50

White Oak - Rift (Straight Grain)

35.25

35.25

26.25

*Inset: Whole Piece, Face ONLY!

30

Standard Profiles

Bordeaux Chablis

#6 Inside Edge, Plywood Panel, B-2 (fingerpull) or B-3 (no lip) Outside Edge and 3” Stiles & Rails

Zinfandel

Profiles

Profile Page

Profile Options

Standard Inside Edges

#6, 7, 8, 12, 17, 18, 25 & 29

128

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Chateau pricing for Bordeaux, Chablis & Zinfandel door styles Refer to page #26 for pricing Available in all stocked wood species & MDF

148

3/8” Thick “VP” Panel (veneer)

Use Chateau pricing for Bordeaux, Chablis & Zinfandel door styles Refer to page #26 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

120-124

Stile & Rail Options 3” Stiles & Rails: standard 2 1/2” Stiles & Rails: use standard 3” pricing 2 1/4” Stiles & Rails: not available

125

Arch Options Deluxe Arch: arch on top and bottom of door Deluxe Arch: add $1.50 per sq. ft.

4” Stiles & Rails: add 15% to sq. ft. price

Split Arch (2 doors): add 50% per sq. ft. (refer to drawing on page #116) Split Arch doors are only available for Bordeaux & Chablis door styles

Non-standard stile & rail sizes: call for pricing

Custom Arches: call for pricing (drawing or photo required)

Cope ‘N Stick Inset Premier Series

Door Style

Center Stile: add 25% to sq. ft. price (refer to drawing on page #111)

Frame Thickness

Minimum & Maximum Sizing Chart for arch & deluxe arch doors

13/16” Thick: standard

Page

3/4” Thick: not available

1/4” Plywood or 1/4” MDF

164-170

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

164-170

1” Thick: add 30% to sq. ft. price

3/8” Thick “F” Panel (solid wood or MDF)

164-170

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

31

Cope ‘N Stick Executive Series

Barcelona Inset

Cut for Glass Barcelona Inset

Barcelona Solid

(Plywood Panel)

(“F” or “VP” Panel)

4” S&R

Barcelona 4” S&R

MDF 13/16” Thick

19.50

24.25

19.50

10.00

PG Poplar Frame with MDF Panel

19.50

24.25

19.50

10.00

PG Alder Frame with MDF Panel

20.50

25.00

20.50

11.25

PG Maple Frame with MDF Panel

21.75

25.75

21.75

13.00

PG Maple Frame & Panel

23.50

28.25

23.50

13.00

Alder - Select

23.50

28.25

23.50

13.00

Alder - Rustic

26.25

31.50

26.25

14.50

Beech - Select

23.50

28.25

23.50

13.00

Cherry - Select

32.00

34.50

32.00

21.50

Cherry - Rustic

N/A

38.75

35.75

24.00

Hickory - Select (Calico)

29.75

34.00

29.75

18.50

Hickory - Rustic (Calico)

N/A

38.25

33.50

20.50

Mahogany, African (Flat Sawn)

N/A

43.75

39.50

24.75

Mahogany, African (Ribbon)

N/A

43.75

39.50

24.75

Maple - Natural*

23.50

28.25

23.50

13.00

Maple - Select

26.25

32.25

27.75

17.75

Maple - Rustic

N/A

36.00

31.00

20.25

Pine - Knotty

N/A

31.00

24.50

17.75

Red Oak - Select

23.50

28.00

23.50

13.00

Sapele - (Flat Sawn)

N/A

44.00

39.50

25.00

Sapele - (Ribbon)

N/A

44.00

39.50

25.00

Walnut - Select

44.25

46.25

44.25

26.25

Walnut - Rustic

N/A

49.50

47.25

26.75

White Oak - Select

34.50

41.00

36.00

22.50

White Oak - Rustic

N/A

38.25

31.75

20.50

White Oak - Rift (Straight Grain)

44.25

46.25

44.25

26.25

White Oak - Quarter Sawn

N/A

44.00

42.00

25.00

Materials

32

Barcelona Solid

*Inset: Whole Piece, Face ONLY!

4” S&R

Solid Drawer Fronts

Standard Profiles

Profile Page

Barcelona Inset

#15 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 4” Stiles & Rails

130

Barcelona Solid

#15 Inside Edge, F Panel, D-3 (square) Outside Edge and 4” Stiles & Rails

130

Profiles

Profile Options

Profile Page

Standard Inside Edge

#15

130

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “VP” Panel (veneer)

Use Barcelona solid panel pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Solid Panel

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

148

Standard Outside Edges

D-3 (square) only

120-124 5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

Stile & Rail Options 4” Stiles & Rails: standard 3” Stiles & Rails: deduct 10% per sq. ft. 2 1/2” Stiles & Rails: deduct 15% per sq. ft. 2 1/4” Stiles & Rails: deduct 20% per sq. ft. Non-standard stile & rail sizes: call for pricing

Option Charge

1 3/8”, 1 3/4” or 2” Rails (must specify) with Plywood Panel

$8.00 Per Piece

1 3/8”, 1 3/4” or 2” Rails (must specify) with “F” or “VP” Panel

$10.00 Per Piece

Cope ‘N Stick Executive Series

Door Style

Non-standard stile & rail sizes: call for pricing

Center Stile: add 25% to sq. ft. price Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

177

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

177

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

177

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options)

Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite.

Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

33

Cope ‘N Stick Executive Series

Madrid

Cut for Glass Materials

34

Madrid 4” S&R

Madrid 4” S&R

Solid Drawer Fronts

MDF 13/16” Thick

25.75

14.50

10.00

PG Poplar Frame with MDF Panel

25.75

14.50

10.00

PG Alder Frame with MDF Panel

26.75

15.50

11.25

PG Maple Frame with MDF Panel

27.25

16.50

13.00

PG Maple Frame & Panel

29.75

18.00

13.00

Alder - Select

29.75

18.00

13.00

Alder - Rustic

33.50

20.25

14.50

Beech - Select

29.75

18.00

13.00

Cherry - Select

36.00

27.00

21.50

Cherry - Rustic

40.50

30.25

24.00

Hickory - Select (Calico)

35.25

24.75

18.50

Hickory - Rustic (Calico)

39.75

28.00

20.50

Mahogany, African (Flat Sawn)

45.00

33.75

24.75

Mahogany, African (Ribbon)

45.00

33.75

24.75

Maple-Natural

31.00

20.25

13.00

Maple - Select

33.50

19.75

17.75

Maple - Rustic

37.75

22.25

20.25

Pine - Knotty

32.50

19.25

17.75

Red Oak - Select

29.25

17.00

13.00

Sapele - (Flat Sawn)

45.50

34.00

25.00

Sapele - (Ribbon)

45.50

34.00

25.00

Walnut - Select

48.00

35.75

26.25

Walnut - Rustic

51.00

38.25

26.75

White Oak - Select

42.75

30.00

22.50

White Oak - Rustic

39.75

28.00

20.50

White Oak - Rift (Straight Grain)

48.00

35.75

26.25

White Oak - Quarter Sawn

45.50

34.00

25.00

Madrid

Standard Profiles #1 Inside Edge, M Panel, D-3 (square) Outside Edge and 4” Stiles & Rails

Profiles

Profile Options

Profile Page 131

Profile Page

Standard Inside Edge

#1

126

Standard Solid Panel

M Panel

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft. 5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

Stile & Rail Options 4” Stiles & Rails: standard 3” Stiles & Rails: deduct 10% per sq. ft.

120-124

1 3/8”, 1 3/4” or 2” Rails (must specify)

2 1/2” Stiles & Rails: deduct 15% per sq. ft.

125

Option Charge $10.00 Per Piece

Non-standard stile & rail sizes: call for pricing

Cope ‘N Stick Executive Series

Door Style

2 1/4” Stiles & Rails: deduct 20% per sq. ft. Minimum Sizing Chart for doors and 5-piece drawer fronts

Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price

M Panel

Page 177

Panel Reveal Options

Frame Thickness 13/16” Thick: standard

Standard M Panel reveal is 1/8”

3/4” Thick: no upcharge

Larger M Panel reveal available (must specify) see page 148

7/8” Thick: add 10% to sq. ft. price 1” Thick: add 30% to sq. ft. price Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

35

Cope ‘N Stick Executive Series

Tuscan Inset

Cut for Glass Tuscan Inset

Tuscan Solid

(Plywood Panel)

(“F” or “VP” Panel)

3” S&R

Tuscan 3” S&R

MDF 13/16” Thick

15.00

21.75

15.00

10.00

PG Poplar Frame with MDF Panel

15.00

21.75

15.00

10.00

PG Alder Frame with MDF Panel

15.75

22.25

15.75

11.25

PG Maple Frame with MDF Panel

16.75

23.00

16.75

13.00

PG Maple Frame & Panel

18.75

25.50

18.75

13.00

Materials

36

Tuscan Solid

3” S&R

Solid Drawer Fronts

Alder - Select

18.75

25.50

18.75

13.00

Alder - Rustic

21.00

28.75

21.00

14.50

Beech - Select

18.75

25.50

18.75

13.00

Cherry - Select

24.50

31.50

24.50

21.50

Cherry - Rustic

N/A

35.50

27.75

24.00

Hickory - Select (Calico)

23.25

31.00

23.25

18.50

Hickory - Rustic (Calico)

N/A

35.00

26.00

20.50

Mahogany, African (Flat Sawn)

N/A

40.75

30.00

24.75

Mahogany, African (Ribbon)

N/A

40.75

30.00

24.75

Maple - Natural*

18.75

27.00

18.75

13.00

Maple - Select

21.75

29.25

21.75

17.75

Maple - Rustic

N/A

33.00

24.25

20.25

Pine - Knotty

N/A

28.25

19.50

17.75

Red Oak - Select

18.75

25.50

18.75

13.00

Sapele - (Flat Sawn)

N/A

41.00

32.25

25.00

Sapele - (Ribbon)

N/A

41.00

32.25

25.00

Walnut - Select

34.00

43.25

34.00

26.25

Walnut - Rustic

N/A

46.00

36.00

26.75

White Oak - Select

27.00

37.75

27.00

22.50

White Oak - Rustic

N/A

35.00

26.00

20.50

White Oak - Rift (Straight Grain)

34.00

43.25

34.00

26.25

White Oak - Quarter Sawn

N/A

41.00

32.25

25.00

*Inset: Whole Piece, Face ONLY!

Standard Profiles

Profile Page

Tuscan Inset

#13 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 3” Stiles & Rails

134

Tuscan Solid

#13 Inside Edge Detail, F Panel, D-3 (square) Outside Edge and 3” Stiles & Rails

134

Profiles

Profile Options

Profile Page

Standard Inside Edge

#13

134

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “VP” Panel (veneer)

Use Tuscan solid panel pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Solid Panel

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

148

Standard Outside Edges

D-3 (square) only

Stile & Rail Options 3” Stiles & Rails: standard 2 1/2” Stiles & Rails: deduct 10% to sq. ft. price 2 1/4” Stiles & Rails: deduct 20% to sq. ft. price Non-standard stile & rail sizes: call for pricing

120-124 5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

Option Charge

1 3/8”, 1 3/4” or 2” Rails (must specify) with Plywood Panel

$8.00 Per Piece

1 3/8”, 1 3/4” or 2” Rails (must specify) with “F” Panel or “VP” Panel

$10.00 Per Piece

Cope ‘N Stick Executive Series

Door Style

Center Stile: add 25% to sq. ft. price Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

162

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

162

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

162

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

37

Cope ‘N Stick Executive Series

Del Rio

Del Oro

Cut for Glass Materials

MDF 13/16” Thick

38

Del Rio

Del Oro

(Plywood Panel)

(Solid or “VP” Panel)

Solid Drawer Fronts

2 1/2” (S) & 3” (R)

2 1/2” (S) & 3” (R)

Del Oro & Del Rio

16.75

22.50

16.75

10.00

2 1/2” (S) & 3” (R)

PG Poplar Frame with MDF Panel

16.75

22.50

16.75

10.00

PG Alder Frame with MDF Panel

17.50

23.00

17.50

11.25

PG Maple Frame with MDF Panel

18.00

23.75

18.00

13.00

PG Maple Frame & Panel

19.25

26.00

19.25

13.00

Alder - Select

19.25

26.00

19.25

13.00

Alder - Rustic

21.75

29.25

20.75

14.50

Beech - Select

19.25

26.00

19.25

13.00

Cherry - Select

25.25

32.50

25.25

21.50

Cherry - Rustic

N/A

36.25

28.25

24.00

Hickory - Select (Calico)

24.00

32.00

24.00

18.50

Hickory - Rustic (Calico)

N/A

35.75

25.50

20.50

Mahogany, African (Flat Sawn)

N/A

41.25

30.75

24.75

Mahogany, African (Ribbon)

N/A

41.25

30.75

24.75

Maple - Natural*

19.25

27.75

19.25

13.00

Maple - Select

22.50

30.00

22.50

17.75

Maple - Rustic

N/A

33.75

25.25

20.25

Pine - Knotty

N/A

29.00

20.25

17.75

Red Oak - Select

19.25

26.00

19.25

13.00

Sapele - (Flat Sawn)

N/A

41.75

33.00

25.00

Sapele - (Ribbon)

N/A

41.75

33.00

25.00

Walnut - Select

34.75

44.00

34.75

26.25

Walnut - Rustic

N/A

47.00

32.50

26.75

White Oak - Select

28.00

38.75

28.25

22.50

White Oak - Rustic

N/A

35.75

25.50

20.50

White Oak - Rift (Straight Grain)

34.75

44.00

34.75

26.25

White Oak - Quarter Sawn

N/A

41.75

33.00

25.00

*Inset: Whole Piece, Face ONLY!

Standard Profiles

Profile Page

Del Rio

#2 Inside Edge on Rails, #23 Inside Edge on Stiles, Plywood Panel, D-3 (square) Outside Edge, 2 1/2” stiles & 3” rails and a 45° bevel starts and stops 1” from rails top and bottom

132

Del Oro

#2 Inside Edge on Rails, #23 Inside Edge on Stiles, R Panel, D-3 (square) Outside Edge, 2 1/2” stiles & 3” rails and a 45° bevel starts and stops 1” from rails top and bottom

132

Profiles

Profile Options

Profile Page

Standard Stile & Rail

#2 Inside Edge on Rails & #23 Inside Edge on Stiles

126-127

Rail Options (standard)

#3, 4, 5, 9, 10, 11, 18, 19, 20, 21, 22, 23 & 24 Inside Edge: add 10% to sq. ft. price

126-127

Rail Options (premium)

#6, 7, 8, 12, 17, 18 & 25 Inside Edge: add 20% to sq. ft. price

128

Stile Options

Only available with #23 Inside Edge on Stiles

126

Del Rio Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “VP” Panel (veneer)

Use Del Oro pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Del Oro pricing Available in all stocked wood species & MDF

148

Del Oro Standard Solid Panels Del Oro Premium Solid Panels

C, E, F, H, I, J, L , R, S, Small S, U, Y, Z & Small Z A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price

148-150

M Panel: add 20% to sq. ft. price

148

Standard Outside Edges

49 Standard Outside Edge Profiles

120-124

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 2 1/2” Stiles & 3” Rails: standard 2 1/2” Stiles & Rails: use standard pricing 3” Stiles & Rails: add 10% to sq. ft. price 4” Stiles & Rails: add 25% to sq. ft. price

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

Cope ‘N Stick Executive Series

Door Style

125

Option Charge

Del Rio 1 3/8”, 1 3/4” or 2” Rails (must specify)

$8.00 Per Piece

Del Oro 1 3/8”, 1 3/4” or 2” Rails (must specify)

$10.00 Per Piece

Non-standard stile & rail sizes: call for pricing Minimum Sizing Chart for doors and 5-piece drawer fronts

Frame Thickness

Page

13/16” Thick: standard

1/4” Plywood or 1/4” MDF

162

3/4” Thick: no upcharge

3/8” Thick “VP” Panel (veneer)

162

7/8” Thick: add 10% to sq. ft. price

Standard Solid Panels & 3/8” Thick “F” Panel

162-163

1” Thick: add 30% to sq. ft. price

Premium Solid Panels

162-163

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

39

Cope ‘N Stick Executive Series

Teton Inset

Teton Solid

Cut for Glass Materials

40

Teton Inset

Teton Solid

(Plywood Panel)

(Solid or “VP” Panel)

2 1/4” (S) & 3” (R)

2 1/4” (S) & 3” (R)

Teton 2 1/4” (S) & 3” (R)

Solid Drawer Fronts

MDF 13/16” Thick

12.50

19.50

12.50

10.00

PG Poplar Frame with MDF Panel

12.50

19.50

12.50

10.00

PG Alder Frame with MDF Panel

13.25

20.00

13.25

11.25

PG Maple Frame with MDF Panel

13.75

20.75

13.75

13.00

PG Maple Frame & Panel

15.75

23.50

15.75

13.00

Alder - Select

15.75

23.50

15.75

13.00

Alder - Rustic

18.00

26.25

18.00

14.50

Beech - Select

15.75

23.50

15.75

13.00

Cherry - Select

22.00

29.75

22.00

21.50

Cherry - Rustic

N/A

33.50

24.50

24.00

Hickory - Select (Calico)

20.25

29.00

20.25

18.50

Hickory - Rustic (Calico)

N/A

32.75

23.00

20.50

Mahogany, African (Flat Sawn)

N/A

38.50

27.25

24.75

Mahogany, African (Ribbon)

N/A

38.50

27.25

24.75

Maple - Natural*

15.75

24.75

15.75

13.00

Maple - Select

18.00

27.25

18.00

17.75

Maple - Rustic

N/A

30.50

19.00

20.25

Pine - Knotty

N/A

26.00

16.75

17.75

Red Oak - Select

15.75

23.00

15.75

13.00

Sapele - (Flat Sawn)

N/A

39.00

27.25

25.00

Sapele - (Ribbon)

N/A

39.00

27.25

25.00

Walnut - Select

30.50

41.00

30.50

26.25

Walnut - Rustic

N/A

43.75

32.75

26.75

White Oak - Select

23.50

35.00

23.50

22.50

White Oak - Rustic

N/A

32.75

23.00

20.50

White Oak - Rift (Straight Grain)

30.50

41.00

30.50

26.25

White Oak - Quarter Sawn

N/A

39.00

30.50

25.00

*Inset: Whole Piece, Face ONLY!

Standard Profiles

Profile Page

Teton Inset

#5 Inside Edge on Rails, #23 Inside Edge on Stiles, Plywood Panel, D-3 (square) Outside Edge, and 2 1/4” Stiles & 3” Rails

133

Teton Solid

#5 Inside Edge Rails, #23 Inside Edge on Stiles, F Panel, D-3 (square) Outside Edge, and 2 1/4” Stiles & 3” Rails

133

Profiles

Profile Options

Profile Page

Standard Stile & Rail

#5 Inside Edge on Rails & #23 Inside Edge on Stiles

126-127

Rail Options (standard)

#2, 3, 4, 9, 10, 11, 19, 20, 21, 22, 23 & 24 Inside Edge: add 10% to sq. ft. price

126-127

Rail Options (premium)

#6, 7, 8, 12, 17, 18 & 25 Inside Edge: add 20% to sq. ft. price

128

Stile Options

Only available with #23 Inside Edge on Stiles

126

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “VP” Panel (veneer)

Use Teton solid panel pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Solid Panel

3/8” Thick “F” Panel (solid wood or MDF)

Standard Outside Edge

49 Standard Outside Edge Profiles

Rosewood Outside Edge

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

Stile & Rail Options 2 1/4” Stiles & 3” Rails: standard 2 1/4” Stiles & Rails: use standard pricing 2 1/2” Stiles & Rails: add 5% to sq. ft. price. 3” Stiles & Rails: add 10% to sq. ft. price

148 120-124 125

Cope ‘N Stick Executive Series

Door Style

Option Charge

Teton Inset 1 3/8”, 1 3/4” or 2” Rails (must specify)

$8.00 Per Piece

Teton Solid 1 3/8”, 1 3/4” or 2” Rails (must specify)

$10.00 Per Piece

4” Stiles & Rails: add 25% to sq. ft. price Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

162

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

162

1” Thick: add 30% to sq. ft. price

3/8” Thick F Panel (solid wood or MDF)

162

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

41

Cope ‘N Stick Executive Series

Nobil Inset

Nobil Solid

Cut for Glass Nobil Inset

Nobil Solid

(Plywood Panel)

(L, F or “VP” Panel)

2 1/4” S&R

Nobil 2 1/4” S&R

MDF 13/16” Thick

15.00

21.75

15.00

10.00

PG Poplar Frame with MDF Panel

15.00

21.75

15.00

10.00

PG Alder Frame with MDF Panel

15.75

22.25

15.75

11.25

PG Maple Frame with MDF Panel

16.75

23.00

16.75

13.00

PG Maple Frame & Panel

18.75

25.50

18.75

13.00

Alder - Select

18.75

25.50

18.75

13.00

Alder - Rustic

21.00

28.75

21.00

14.50

Beech - Select

18.75

25.50

18.75

13.00

Cherry - Select

24.50

31.50

24.50

21.50

Cherry - Rustic

N/A

35.50

27.75

24.00

Hickory - Select (Calico)

23.25

31.00

23.25

18.50

Hickory - Rustic (Calico)

N/A

35.00

26.00

20.50

Mahogany, African (Flat Sawn)

N/A

40.75

30.00

24.75

Mahogany, African (Ribbon)

N/A

40.75

30.00

24.75

Maple - Natural*

18.75

27.00

18.75

13.00

Maple - Select

21.75

29.25

21.75

17.75

Maple - Rustic

N/A

33.00

24.25

20.25

Pine - Knotty

N/A

28.25

19.50

17.75

Red Oak - Select

18.75

25.50

18.75

13.00

Sapele - (Flat Sawn)

N/A

41.00

32.25

25.00

Sapele - (Ribbon)

N/A

41.00

32.25

25.00

Walnut - Select

34.00

43.25

34.00

26.25

Walnut - Rustic

N/A

46.00

36.00

26.75

White Oak - Select

27.00

37.75

27.00

22.50

White Oak - Rustic

N/A

35.00

26.00

20.50

White Oak - Rift (Straight Grain)

34.00

43.25

34.00

26.25

White Oak - Quarter Sawn

N/A

41.00

32.25

25.00

Materials

42 *Inset: Whole Piece, Face ONLY!

2 1/4” S&R

Solid Drawer Fronts

Standard Profiles

Profile Page

Nobil Inset

#14 Inside Edge, Plywood Panel, A-7 (no lip) or A-11 (fingerpull) Outside Edge and 2 1/4” Stiles & Rails

135

Nobil Solid

#14 Inside Edge, L Panel, A-7 (no lip) or A-11 (fingerpull) Outside Edge and 2 1/4” Stiles & Rails

135

Profiles Standard Inside Edge

Profile Options

Profile Page

#14

135

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “VP” Panel (veneer)

Use Nobil solid panel pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Solid Panel

L Panel & 3/8” Thick “F” Panel (solid wood or MDF)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft. 5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

Stile & Rail Options 2 1/4” Stiles & Rails: standard 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price 4” Stiles & Rails: add 35% to sq. ft. price

120-124 125 Option Charge

Nobil Inset 1 3/8”, 1 3/4” or 2” Rails (must specify)

$8.00 Per Piece

Nobil Solid 1 3/8”, 1 3/4” or 2” Rails (must specify)

$10.00 Per Piece

Cope ‘N Stick Executive Series

Door Style

Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Minimum Sizing Chart for doors and 5-piece drawer fronts

Frame Thickness

Page

13/16” Thick: standard

1/4” Plywood or 1/4” MDF

162

3/4” Thick: no upcharge

3/8” Thick “VP” Panel (veneer)

162

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “F” Panel (solid wood or MDF)

162

1” Thick: add 30% to sq. ft. price

L Panel

163

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

43

Cope ‘N Stick Desert Series

Santa Fe

Pueblo

Pueblo & Santa Fe (Inset Panel) 2 1/4” S&R

Cheyenne (Inset Panel) 2 1/4” S&R

MDF 13/16” Thick

13.75

15.25

PG Poplar Frame with MDF Panel

13.75

PG Alder Frame with MDF Panel

14.50

PG Maple Frame with MDF Panel

Pueblo & Santa Fe (Solid Panel) 2 1/4” S&R

Cheyenne (Solid Panel) 2 1/4” S&R

Solid Drawer Fronts

17.50

18.75

10.00

15.25

17.50

18.75

10.00

16.25

18.50

19.75

11.25

15.00

16.75

19.25

20.75

13.00

PG Maple Frame & Panel

16.75

18.25

23.00

24.25

13.00

Alder - Select

16.75

18.25

23.00

24.25

13.00

Alder - Rustic

18.75

20.50

25.75

27.50

14.50

Beech - Select

16.75

18.25

23.00

24.25

13.00

24.00

31.50

33.00

21.50

27.00

35.50

36.75

24.00

22.75

30.75

32.25

18.50

Materials

Cherry - Select Cherry - Rustic

22.50 GL

Hickory - Select (Calico)

25.25

GL

21.00

Hickory - Rustic (Calico)

GL

23.75

GL

25.50

34.75

36.00

20.50

Mahogany, African (Flat Sawn)

GL

27.75

GL

29.25

43.75

45.25

24.75

Mahogany, African (Ribbon)

GL

27.75

GL

29.25

43.75

45.25

24.75

18.25

24.75

26.25

13.00

Maple - Natural*

16.75

Maple - Select

20.50

28.25

29.50

17.75

Maple - Rustic

GL

19.00 21.50

GL

23.25

31.50

33.25

20.25

Pine - Knotty

GL

17.50

GL

18.75

27.00

28.25

17.75

Red Oak - Select

18.25

23.00

24.25

13.00

Sapele - (Flat Sawn)

GL

16.75 29.75

GL

29.50

44.25

45.50

25.00

Sapele - (Ribbon)

GL

29.75

GL

29.50

44.25

45.50

25.00

31.00

46.50

48.00

26.25

33.25

49.75

51.00

26.75

26.25

37.50

39.00

22.50

25.50

34.75

36.00

20.50

31.00

46.50

48.00

26.25

29.50

44.25

45.50

25.00

Walnut - Select Walnut - Rustic

31.25 GL

White Oak - Select White Oak - Rustic White Oak - Quarter Sawn

*Inset: Whole Piece, Face ONLY!

33.50

GL

24.50 GL

White Oak - Rift (Straight Grain)

44

Cheyenne

23.75

GL

31.25 GL

28.00

GL

Standard Profiles

Profile Page

#1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

137

Santa Fe

#1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge, 2 1/4” Stiles & Rails and 2 1/4” x 2 1/4” applied blocks on top corners of door

136

Cheyenne

#1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge, 2 1/4” Stiles & Rails and 3 1/4” x 1 1/2” applied blocks on top corners of door

137

Profiles

Profile Options

Profile Page

Standard Inside Edge

#1

126

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “VP” Panel (veneer)

Use solid panel pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

1/2” Thick “F” Panel (solid wood) 3/8” Thick “F” Panel (MDF)

Use solid panel pricing Available in all stocked wood species & MDF

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

Stile & Rail Options 2 1/4” Stiles & Rails: standard 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price 4” Stiles & Rails: add 35% to sq. ft. price

120-124 125

Cope ‘N Stick Desert Series

Door Style Pueblo

Option Charge

1 3/8”, 1 3/4” or 2” Rails (must specify) with Plywood Panel

$8.00 Per Piece

1 3/8”, 1 3/4” or 2” Rails (must specify) with “F’ or “VP” Panel

$10.00 Per Piece

Non-standard stile & rail sizes: call for pricing

Profile Page

Deluxe Options Santa Fe Deluxe (2 1/4” x 2 1/4” applied blocks on top & bottom corners of door): add $2.50 per sq. ft.

136

Cheyenne Deluxe (3 1/4” x 1 1/2” applied blocks on top & bottom corners of door): add $3.50 per sq. ft.

137

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

162

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

162

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

162

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed, Solid with Rosewood Outside Edge & 3-Piece Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece.

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 or R-9: use solid drawer front sq. ft. price + $10.00 per piece.

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece.

158

3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece.

159

45

Cope ‘N Stick Solid Applied Molding Series 46

Coronado

Montecito

San Simeon

Materials

Coronado, Montecito & San Simeon 2 1/4” S&R

Carmel 3” S&R

MDF 13/16” Thick

23.00

PG Poplar Frame with MDF

Carmel

Cut for Glass Solid Drawer Fronts

Coronado, Montecito & San Simeon 2 1/4” S&R

Carmel 3” S&R

25.50

18.75

22.50

10.00

23.00

25.50

18.75

22.50

10.00

PG Alder Frame with MDF Panel

23.75

26.25

19.50

23.50

11.25

PG Maple Frame with MDF

24.25

27.25

20.00

24.25

13.00

PG Maple Frame & Panel

27.75

30.75

23.50

28.00

13.00

Alder - Select

27.75

34.75

23.50

28.00

13.00

Alder - Rustic

31.00

38.75

26.25

31.25

14.50

Beech - Select

27.75

30.75

23.50

28.00

13.00

Cherry - Select

34.00

38.50

29.75

35.50

21.50

Cherry - Rustic

38.25

43.25

33.50

40.00

24.00

Hickory - Select (Calico)

33.25

37.75

28.25

38.25

18.50

Hickory - Rustic (Calico)

37.50

42.50

31.50

42.75

20.50

Mahogany, African (Flat Sawn)

43.00

49.25

35.00

41.75

24.75

Mahogany, African (Ribbon)

43.00

49.25

35.00

41.75

24.75

Maple-Natural

29.00

32.50

25.00

30.00

13.00

Maple - Select

31.25

35.25

27.00

32.25

17.75

Maple - Rustic

35.25

39.75

30.25

36.00

20.25

Pine - Knotty

30.25

34.25

24.50

29.25

17.75

Red Oak - Select

27.75

30.75

23.50

28.00

13.00

Sapele - (Flat Sawn)

43.25

49.50

35.25

42.00

25.00

Sapele - (Ribbon)

43.25

49.50

35.25

42.00

25.00

Walnut - Select

45.50

52.00

39.75

47.25

26.25

Walnut - Rustic

48.50

55.50

39.75

48.50

26.75

White Oak - Select

40.25

45.50

34.25

41.00

22.50

White Oak - Rustic

37.50

42.50

31.50

38.25

20.50

White Oak - Rift (Straight Grain)

45.50

52.00

39.75

47.25

26.25

White Oak - Quarter Sawn

43.25

49.50

35.25

42.00

25.00

Standard Profiles

Coronado

AM-6 Molding, #1 Inside Edge, Solid Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Montecito

AM-3 Molding, #1 Inside Edge, Solid Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

San Simeon

AM-1 Molding, #1 Inside Edge, Solid Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Carmel

AM-8 Molding, #1 Inside Edge, Solid Panel, D-3 (square) Outside Edge and 3” Stiles & Rails Profiles

Profile Options

Standard Inside Edge

#1

Applied Moldings

AM-1, AM-2, AM-3, AM-4, AM-5, AM-6, AM-7, AM-8, AM-9, AM-10, AM-11, AM-13, AM-14, AM-15, AM-16, AM-17, AM-18 & AM-19

Large Solid Panels

Profile Page 126 152-153

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S

151

1/2” Thick Solid “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

2 1/4” Stiles & Rails: use Coronado pricing 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: use Carmel pricing

120-124

1 3/8”, 1 3/4” or 2” Rails (must specify)

4” Stiles & Rails: use Carmel pricing + 15% per sq. ft.

125

Option Charge $10.00 Per Piece

Non-standard rail sizes: call for pricing

Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Cope ‘N Stick Solid Applied Molding Series

Door Style

Page

3/4” Thick: no upcharge

Large Solid Panels

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

174-175

172

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

174-175

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Solid with Applied Molding, Designer, Routed & Solid with Rosewood Outside Edge Drawer Fronts: minimum 1 sq. ft.

Profile Page

Solid Drawer Fronts with Applied Molding: use solid drawer front sq. ft. price + molding charge ($25.00 to $75.00) per piece

160-161

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

47

Cope ‘N Stick Inset Applied Molding Series

Cascade

Laguna

San Marino

Diablo

R-4 Outside Edge (optional)

Cascade, Laguna & San Marino 2 1/4” S&R

Materials

Diablo 3” S&R

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16” Thick

18.75

22.50

10.00

PG Poplar Frame with MDF Panel

18.75

22.50

10.00

PG Alder Frame with MDF Panel

19.50

23.50

11.25

PG Maple Frame with MDF Panel

20.00

24.25

13.00

PG Maple Frame & Panel

23.50

28.00

13.00

Alder - Select

23.50

28.00

13.00

Alder - Rustic

26.25

31.25

14.50

Beech - Select

23.50

28.00

13.00

Cherry - Select

29.75

35.50

21.50

Hickory - Select (Calico)

28.25

38.25

18.50

Maple - Natural*

25.00

30.00

13.00

Maple - Select

27.00

32.25

17.75

Red Oak - Select

23.50

28.00

13.00

Walnut - Select

39.75

47.25

26.25

White Oak - Select

34.25

41.00

22.50

White Oak - Rift (Straight Grain)

39.75

47.25

26.25

*Inset: Whole Piece, Face ONLY!

48

Standard Profiles

Cascade

AM-6 Molding, #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Laguna

AM-2 Molding, #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

San Marino

AM-1 Molding, #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Diablo

AM-8 Molding, #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge and 3” Stiles & Rails Profiles

Profile Options

Profile Page

Standard Inside Edge

#1

Applied Moldings

AM-1, AM-2, AM-3, AM-4, AM-5, AM-6, AM-7, AM-8, AM-9, AM-10, AM-11, AM-13 AM-14, AM-15, AM-16, AM-17, AM-18 & AM-19

126

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

1/2” Thick “F” Panel (solid wood) 3/8” Thick “F” Panel (MDF)

Use Cope ‘N Stick Solid Applied Molding door pricing per sq. ft. Refer to page #46 for pricing Available in all stocked wood species or MDF

148

3/8” Thick “VP” Panel (veneer)

Use Cope ‘N Stick Solid Applied Molding door pricing per sq. ft. Refer to page #46 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: use Diablo pricing 4” Stiles & Rails: use Diablo pricing + 15% per sq. ft.

120-124

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

2 1/4” Stiles & Rails: use Cascade pricing

152-153

1 3/8”, 1 3/4” or 2” Rails (must specify)

125

Option Charge $8.00 Per Piece

Cope ‘N Stick Inset Applied Molding Series

Door Style

Non-standard rail sizes: call for pricing

Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

174-175

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

174-175

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

174-175

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Solid with Applied Molding, Designer, Routed & Solid with Rosewood Outside Edge Drawer Fronts: minimum 1 sq. ft.

Profile Page

Solid Drawer Fronts with Applied Molding: use solid drawer front sq. ft. price + molding charge ($25.00 to $75.00) per piece

160-161

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

49

Cope ‘N Stick Inset Applied Molding Series

Pleasanton

San Ramon

Pleasanton with Center Stiles 2 1/4” S&R

Materials

San Ramon with Center Stiles 2 1/4” S&R

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16” Thick

23.25

23.25

10.00

PG Poplar Frame with MDF Panel

23.25

23.25

10.00

PG Alder Frame with MDF Panel

24.25

24.25

11.25

PG Maple Frame with MDF Panel

25.00

25.00

13.00

PG Maple Frame & Panel

29.25

29.25

13.00

Alder - Select

29.25

29.25

13.00

Alder - Rustic

33.00

33.00

14.50

Beech - Select

29.25

29.25

13.00

Cherry - Select

36.75

36.75

21.50

Hickory - Select (Calico)

35.00

35.00

18.50

Maple - Natural*

29.25

29.25

13.00

Maple - Select

33.25

33.25

17.75

Red Oak - Select

29.25

29.25

13.00

Walnut - Select

49.50

49.50

26.25

White Oak - Select

40.50

40.50

22.50

White Oak - Rift (Straight Grain)

49.50

49.50

26.25

*Inset: Whole Piece, Face ONLY!

50

Standard Profiles

Pleasanton

AM-1 Molding, #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge, 2 1/4” Stiles & Rails and a 2 1/4” Center Stile

San Ramon

AM-6 Molding, #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge, 2 1/4” Stiles & Rails and a 2 1/4” Center Stile Profiles

Profile Options

Profile Page

Standard Inside Edge

#1

126

Applied Moldings

AM-1, AM-2, AM-3, AM-4, AM-5, AM-6, AM-7, AM-8, AM-9, AM-10, AM-11, AM-13 AM-14, AM-15, AM-16, AM-17, AM-18 & AM-19

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

1/2” Thick “F” Panel (solid wood) 3/8” Thick “F” Panel (MDF)

Use Cope ‘N Stick Solid Applied Molding door pricing + 25% per sq. ft. for center stile Refer to page #46 for pricing Available in all stocked wood species or MDF

148

3/8” Thick “VP” Panel (veneer)

Use Cope ‘N Stick Solid Applied Molding door pricing + 25% per sq. ft. for center stile Refer to page #46 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: add $5.00 per sq. ft. R-4 & R-5 Outside Edge: add $7.00 per sq. ft.

Stile & Rail Options

2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: add 20% to sq. ft. price 4” Stiles & Rails: add 35% to sq. ft. price

120-124

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

2 1/4” Stiles & Rails: standard

152-153

1 3/8”, 1 3/4” or 2” Rails (must specify)

125

Option Charge $8.00 Per Piece

Non-standard rail sizes: call for pricing

Cope ‘N Stick Inset Applied Molding Series

Door Style

Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

174-175

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

174-175

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

174-175

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Solid with Applied Molding, Designer, Routed & Solid with Rosewood Outside Edge Drawer Fronts: minimum 1 sq. ft.

Profile Page

Solid Drawer Fronts with Applied Molding: use solid drawer front sq. ft. price + molding charge ($25.00 to $75.00) per piece

160-161

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

51

Mitered 2 1/4” Solid Series 52

Door Styles

Materials

Mitered Solid 2 1/4” S&R

Cut for Glass 2 1/4” S&R

Solid Drawer Fronts

Ellen

MDF 13/16” Thick

17.50

11.50

10.00

Iceland Solid

PG Poplar Frame with MDF

17.50

11.50

10.00

Juanita

PG Alder Frame with MDF

18.25

12.25

11.25

Michael

PG Maple Frame with MDF

18.75

13.00

13.00

Mitered #1 Solid

PG Maple Frame & Panel

22.75

14.50

13.00

Mitered #5 Solid

Alder - Select

22.75

14.50

13.00

Mitered #11 Solid

Alder - Rustic

25.50

16.50

14.50

Mitered #16 Solid

Beech - Select

22.75

14.50

13.00

Mitered #21 Solid

Cherry - Select

36.50

27.50

21.50

Mitered #22 Solid

Cherry - Rustic

41.00

30.75

24.00

Mitered #23 Solid

Hickory - Select (Calico)

27.00

18.50

18.50

MP-26 Solid

Hickory - Rustic (Calico)

30.25

20.75

20.50

MP-48 Solid

Mahogany, African (Flat

35.00

25.50

24.75

Rainier

Mahogany, African (Ribbon)

35.00

25.50

24.75

Sheffield

Maple - Natural

21.75

15.75

13.00

Yosemite

Maple - Select

28.25

16.50

17.75

Maple - Rustic

31.50

18.00

20.25

Pine - Knotty

24.25

15.25

17.75

Red Oak - Select

20.00

13.00

13.00

Sapele - (Flat Sawn)

35.25

25.75

25.00

Sapele - (Ribbon)

35.25

25.75

25.00

Walnut - Select

37.25

27.25

26.25

Walnut - Rustic

39.75

29.00

26.75

White Oak - Select

32.75

22.75

22.50

White Oak - Rustic

30.25

20.75

20.50

White Oak - Rift (Straight

37.25

27.25

26.25

White Oak - Quarter Sawn

35.25

25.75

25.00

Profile Page

Stile & Rail Options

Ellen

142

2 1/4” Stiles & Rails: standard

Iceland Solid

142

2 1/2” Stiles & Rails: refer to page #58 for pricing

Juanita

140

3” Stiles & Rails: refer to page #60 for pricing

Michael

141

Center Stile: add 25% to sq. ft. price

Mitered #1 Solid *

140

Mitered #5 Solid

142

Mitered #11 Solid

140

Mitered #16 Solid *

140

1 3/4” Stiles & Rails: standard

Mitered #21 Solid

142

2” Stiles & Rails: no upcharge

Mitered #22 Solid

141

Mitered #23 Solid

140

MP-26 Solid

141

MP-48 Solid

142

Standard Solid Panels

178-179

Rainier

140

Premium Solid Panels

178-179

Sheffield

141

Large Solid Panels

Yosemite

141

5-Piece Drawer Front Stile & Rail Options use matching door sq. ft. price + option charge per drawer front

Option Charge $10.00 Per Piece

Minimum Sizing Chart for doors and 5-piece drawer fronts

Page

Mitered 2 1/4” Solid Series

Door Styles

180

Frame Thickness 13/16” Thick: standard * Mitered #1 & #16 Solid only available with F Panel

3/4” Thick: no upcharge 7/8” Thick: add 10% to sq. ft. price 1” Thick: add 30% to sq. ft. price

Profiles Standard Solid Panels Premium Solid Panels Large Solid Panels (molding not included)

Profile Options C, E, F, H, I, J, L , R, S, Small S, U, Y, Z & Small Z A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price M Panel: add 20% to sq. ft. price Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S: add 10% to sq. ft. price

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

Profile Page 148-150 148 151 120-124 125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

53

Mitered 2 1/4” Solid Series 54

Ellen

Iceland Solid

Juanita

Michael

Mitered #1 Solid

Mitered #5 Solid

Mitered #11 Solid

Mitered #16 Solid

Mitered #21 Solid

Mitered #23 Solid

MP-26 Solid

MP-48 Solid

Rainier

Yosemite

Mitered 2 1/4” Solid Series

Mitered #22 Solid

R-3 Outside Edge (optional)

Sheffield 55

Mitered 2 1/4” Solid Series

Finland Solid

Finland & MP-27 Solid with Rosewood Bead 2 1/4” S&R

Finland & MP-27 Cut for Glass 2 1/4” S&R

Solid Drawer Fronts

MDF 13/16” Thick

20.00

14.00

10.00

with R-8 or R-9 Outside Edge

PG Poplar Frame with MDF Panel

20.00

14.00

10.00

PG Alder Frame with MDF Panel

20.75

14.75

11.25

MP-27 Solid

PG Maple Frame with MDF Panel

21.50

15.50

13.00

PG Maple Frame & Panel

25.25

17.25

13.00

Alder - Select

25.25

17.25

13.00

Alder - Rustic

28.50

19.25

14.50

Beech - Select

25.25

17.25

13.00

Cherry - Select

33.75

22.50

21.50

Cherry - Rustic

38.00

25.25

24.00

Hickory - Select (Calico)

29.50

21.00

18.50

Hickory - Rustic (Calico)

33.25

23.75

20.50

Mahogany, African (Flat Sawn)

37.75

28.25

24.75

Mahogany, African (Ribbon)

37.75

28.25

24.75

Maple-Natural

24.25

18.75

13.00

Maple - Select

30.75

19.00

17.75

Maple - Rustic

34.75

21.00

20.25

Pine - Knotty

27.25

18.00

17.75

Red Oak - Select

25.25

17.25

13.00

Sapele - (Flat Sawn)

38.00

28.50

25.00

Sapele - (Ribbon)

38.00

28.50

25.00

Walnut - Select

40.00

31.25

26.25

Walnut - Rustic

42.75

32.00

26.75

White Oak - Select

35.75

25.50

22.50

White Oak - Rustic

33.25

23.75

20.50

White Oak - Rift (Straight Grain)

40.00

31.25

26.25

White Oak - Quarter Sawn

38.00

28.50

25.00

Door Styles

Finland Solid

with R-4 or R-5 Outside Edge

56

MP-27 Solid

Materials

Profile Page

Finland Solid (standard with R-8 or R-9 outside edge)

142

MP-27 Solid (standard with R-4 or R-5 outside edge)

141

Stile & Rail Options 2 1/4” Stiles & Rails: standard with Rosewood Outside Edge 2 1/2” Stiles & Rails: refer to page #58 for pricing + $3.00 per sq. ft. for Rosewood Edge 3” Stiles & Rails: refer to page #60 for pricing + $3.00 per sq. ft. for Rosewood Edge Center Stile: add 25% to sq. ft. price 5-Piece Drawer Front Stile & Rail Options use matching door sq. ft. price + option charge per drawer front

Option Charge

1 3/4” Stiles & Rails: Standard

$10.00 Per Piece

2” Stiles & Rails: No upcharge Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

Standard Solid Panels

178-179

7/8” Thick: add 10% to sq. ft. price

Premium Solid Panels

178-179

1” Thick: add 30% to sq. ft. price

Large Solid Panels

Profiles Standard Solid Panels Premium Solid Panels

Profile Options C, E, F, H, I, J, L , R, S, Small S, U, Y, Z & Small Z A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price

Mitered 2 1/4” Solid Series

Door Style

180 Profile Page 148-150

M Panel: add 20% to sq. ft. price

148

Large Solid Panels (Molding not included)

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S: add 10% to sq. ft. price

151

Standard Outside Edges

Finland Solid: Standard with R-8 (no lip) or R-9 (fingerpull) Outside Edge

125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

57

Mitered 2 1/2” Solid Series

Catalina

Door Styles

58

Cortina Solid

Materials

Malibu

Naples Solid

Vail

Mitered Solid 2 1/2” S&R

Cut for Glass 2 1/2” S&R

Solid Drawer Fronts

Catalina

MDF 13/16” Thick

19.00

12.00

10.00

Cortina Solid

PG Poplar Frame with MDF

19.00

12.00

10.00

Malibu

PG Alder Frame with MDF

19.75

12.75

11.25

Mitered #24 Solid

PG Maple Frame with MDF

20.50

13.50

13.00

Naples Solid

PG Maple Frame & Panel

25.25

15.50

13.00

Vail

Alder - Select

25.25

15.50

13.00

Alder - Rustic

28.50

17.75

14.50

Beech - Select

25.25

15.50

13.00

Cherry - Select

34.25

20.75

21.50

Cherry - Rustic

38.50

23.50

24.00

Hickory - Select (Calico)

29.50

19.25

18.50

Hickory - Rustic (Calico)

33.25

21.75

20.50

Mahogany, African (Flat Sawn)

38.50

27.00

24.75

Mahogany, African (Ribbon)

38.50

27.00

24.75

Maple-Natural

23.75

16.75

13.00

Maple - Select

31.00

17.25

17.75

Maple - Rustic

35.00

18.75

20.25

Pine - Knotty

27.00

16.25

17.75

Red Oak - Select

25.25

15.50

13.00

Sapele - (Flat Sawn)

38.75

27.00

25.00

Sapele - (Ribbon)

38.75

27.00

25.00

Walnut - Select

40.75

30.00

26.25

Walnut - Rustic

43.50

30.25

26.75

White Oak - Select

35.75

27.25

22.50

White Oak - Rustic

33.25

21.75

20.50

White Oak - Rift (Straight

40.75

30.00

26.25

White Oak - Quarter Sawn

38.75

27.00

25.00

Profile Page

Stile & Rail Options

Catalina

143

2 1/2” Stiles & Rails: standard

Cortina Solid

143

2 1/4” Stiles & Rails: refer to page #52 for pricing (Not available for Catalina & Cortina door style)

Malibu

143

Mitered #24 Solid *

143

Naples Solid

143

Vail

143

3” Stiles & Rails: refer to page #60 for pricing (Not available for Cortina door style) Center Stile: add 25% to sq. ft. price 5-Piece Drawer Front Stile & Rail Options use matching door sq. ft. price + option charge per drawer front

Option Charge

1 3/4” Stiles & Rails: standard

$10.00 Per Piece

2” Stiles & Rails: no upcharge (Not available for Cortina door style)

$10.00 Per Piece

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

Standard Solid Panels

178-179

7/8” Thick: add 10% per sq. ft.

Premium Solid Panels

178-179

1” Thick: add 30% per sq. ft.

Large Solid Panels

Profiles Standard Solid Panels Premium Solid Panels

Mitered 2 1/2” Solid Series

Door Styles

180 Profile Options

C, E, F, H, I, J, L , R, S, Small S, U, Y, Z & Small Z * Mitered #24 Solid only available with F panel A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price

Profile Page 148-150

M Panel: add 20% to sq. ft. price

148

Large Solid Panels (molding not included)

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S: add 10% to sq. ft. price

151

Standard Outside Edges

52 Standard Outside Edge Profiles Cortina Solid has no options to outside edge

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

120-124 125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

59

Mitered 3” Solid Series

Door Styles

Mitered Solid 3” S&R

Cut for Glass 3” S&R

Solid Drawer Fronts

Andrea

MDF 13/16” Thick

20.75

12.50

10.00

Atherton

PG Poplar Frame with MDF

20.75

12.50

10.00

PG Alder Frame with MDF

21.75

13.50

11.25

PG Maple Frame with MDF

22.50

14.00

13.00

PG Maple Frame & Panel

27.25

16.25

13.00

Alder - Select

27.25

16.25

13.00

Alder - Rustic

30.50

18.00

14.50

Beech - Select

27.25

16.25

13.00

Mitered #6 Solid

Cherry - Select

37.25

22.00

21.50

Mitered #7 Solid

Cherry - Rustic

41.50

24.75

24.00

Mitered #8 Solid

Hickory - Select (Calico)

32.25

20.25

18.50

Mitered #17 Solid

Hickory - Rustic (Calico)

36.00

22.00

20.50

MP-19 Solid

Mahogany, African (Flat

41.75

28.25

24.75

Mahogany, African (Ribbon)

41.75

28.25

24.75

Maple-Natural

26.00

17.75

13.00

Maple - Select

34.00

18.00

17.75

Maple - Rustic

38.25

20.50

20.25

Pine - Knotty

29.25

17.00

17.75

Red Oak - Select

27.25

16.25

13.00

Sapele - (Flat Sawn)

42.00

28.25

25.00

Sapele - (Ribbon)

42.00

28.25

25.00

Walnut - Select

44.25

32.00

26.25

Walnut - Rustic

47.25

30.25

26.75

White Oak - Select

39.00

24.50

22.50

White Oak - Rustic

34.75

22.00

20.50

White Oak - Rift (Straight

44.25

32.00

26.25

White Oak - Quarter Sawn

42.00

28.25

25.00

California Solid Cambridge Columbia Delaware Manhattan

MP-23 Solid MP-49 Solid Olympian Rochester MP-201 Solid Matches AM-5 See Profile Page 147 MP-213 Solid Matches AM-6 See Profile Page 147

60

Materials

Andrea

145

Atherton

145

California Solid

146

Cambridge

145

Columbia

139 & 144

Delaware

138 & 144

Manhattan

144

Mitered #6 Solid

146

Mitered #7 Solid

146

Mitered #8 Solid

146

Mitered #17 Solid

146

MP-19 Solid

144

MP-23 Solid

144

MP-49 Solid

145

Olympian

144

Rochester

145

Stile & Rail Options 3” Stiles & Rails: standard 2 1/4” Stiles & Rails: refer to page #52 for pricing (Not available for Atherton, Manhattan, Mitered #6, Mitered #7, Mitered #8, Mitered #17, MP-19, MP-49 & Rochester ) 2 1/2” Stiles & Rails: refer to page #58 for pricing (Not available for Columbia, Manhattan, MP-19, MP-49 & Rochester) Center Stile: add 25% to sq. ft. price 5-Piece Drawer Front Stile & Rail Options Use matching door sq. ft. price + option charge per drawer front

Option Charge

1 3/4” Stiles & Rails: standard (Not available for MP-49)

$10.00 Per Piece

2” Stiles & Rails: no upcharge (Not available for Columbia & MP-19)

$10.00 Per Piece

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

Standard Solid Panel

178-179

7/8” Thick: add 10% per sq. ft.

Premium Solid Panels

178-179

1” Thick: add 30% per sq. ft.

Large Solid Panels

180

Profiles

Profile Options

Profile Page

Standard Solid Panels

C, E, F, H, I, J, L , R, S, Small S, U, Y, Z & Small Z

Premium Solid Panels

A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price M Panel: add 20% to sq. ft. price

Large Solid Panels (molding not included)

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S: add 10% to sq. ft. price

Standard Outside Edges

49 Standard Outside Edge Profiles Columbia, Delaware & Rochester recommended with A-7 (no lip) or A-11 (fingerpull)

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

Mitered 3” Solid Series

Profile Page

Door Style

148-150 148 151 120-124 125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

61

Mitered 3” Solid Series 62

Andrea

Atherton

California Solid

Cambridge

Columbia

Delaware

Manhattan

Mitered #6 Solid

Mitered #7 Solid

Mitered 3” Solid Series

Mitered #8 Solid

Mitered #17 Solid

MP-19 Solid

MP-23 Solid

MP-49 Solid

Olympian

Rochester 63

Mitered 2 1/4” Inset Series

Door Styles

Materials

Cut for Glass 2 1/4” S&R

Solid Drawer Fronts

Danish

MDF 13/16” Thick

11.50

11.50

10.00

Iceland Inset

PG Poplar Frame with MDF

11.50

11.50

10.00

Mitered #1 Inset

PG Alder Frame with MDF

12.25

12.25

11.25

Mitered #5 Inset

PG Maple Frame with MDF

13.00

13.00

13.00

Mitered #11 Inset

PG Maple Frame & Panel

14.50

14.50

13.00

Mitered #16 Inset

Alder - Select

14.50

14.50

13.00

Mitered #21 Inset

Alder - Rustic

16.50

16.50

14.50

Mitered #22 Inset

Beech - Select

14.50

14.50

13.00

Mitered #23 Inset

Cherry - Select

27.50

27.50

21.50

MP-26 Inset

Hickory - Select (Calico)

18.50

18.50

18.50

MP-48 Inset

Maple - Natural*

15.75

15.75

13.00

Monaco

Maple - Select

16.50

16.50

17.75

Normandy

Red Oak - Select

13.00

13.00

13.00

Ramona

Walnut - Select

27.25

27.25

26.25

Victoria

White Oak - Select

22.75

22.75

22.50

Windsor

White Oak - Rift (Straight

27.25

27.25

26.25

*Inset: Whole Piece, Face ONLY!

64

Mitered Inset 2 1/4” S&R

Profile Page

Stile & Rail Options

Danish

141

2 1/4” Stiles & Rails: standard

Iceland Inset

142

2 1/2” Stiles & Rails: refer to page #70 for pricing

Mitered #1 Inset

140

3” Stiles & Rails: refer to page #72 for pricing

Mitered #5 Inset

142

Center Stile: add 25% to sq. ft. price

Mitered #11 Inset

140

Mitered #16 Inset

140

Mitered #21 Inset

142

Mitered #22 Inset

141

1 3/4” Stiles & Rails: standard

Mitered #23 Inset

140

2” Stiles & Rails: no upcharge

MP-26 Inset

141

5-Piece Drawer Front Stile & Rail Options use matching door sq. ft. price + option charge per drawer front

Option Charge $8.00 Per Piece

MP-48 Inset

142

Monaco

140

Normandy

141

1/4” Plywood or 1/4” MDF

178

Ramona

140

3/8” Thick “VP” Panel (veneer)

178

Victoria

142

3/8” Thick “F” Panel (solid wood or MDF)

178

Windsor

141

Minimum Sizing Chart for doors and 5-piece drawer fronts

Frame Thickness

Frame Thickness

13/16” Thick: standard

13/16” Thick: standard

3/4” Thick: no upcharge

3/4” Thick: no upcharge

7/8” Thick: add 10% to sq. ft. price

7/8” Thick: add 10% to sq. ft. price

1” Thick: add 30% to sq. ft. price

1” Thick: add 30% to sq. ft. price

Profiles

Profile Options

Standard Inset Panel

1/4” Plywood or 1/4” MDF

3/8” Thick “F” Panel (solid wood or MDF)

Use Mitered Solid door pricing per sq. ft. 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60

* Mitered #1 & Mitered #16

“F” panels are available in all stocked wood species & MDF

1/2” Thick “F” Panel (solid wood)

* MDF “F” Panels are always 3/8” thick regardless of profile

3/8” Thick “VP” Panel (veneer)

Page

Mitered 2 1/4” Inset Series

Door Style

Use Mitered Solid door pricing per sq. ft. 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60 Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

Profile Page 148

148

148

120-124 125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

65

Mitered 2 1/4” Inset Series 66

Danish

Iceland Inset

Mitered #1 Inset

Mitered #5 Inset

Mitered #11 Inset

Mitered #16 Inset

Mitered #21 Inset

Mitered #22

MP-26 Inset

Monaco

Normandy

Ramona

Victoria

Windsor

Mitered 2 1/4” Inset Series

MP-48 Inset

67

Mitered 2 1/4” Inset Series

Finland Inset

Door Styles

Materials

Finland & MP-27 Inset with Rosewood Bead 2 1/4” S&R

Finland & MP-27 Cut for Glass 2 1/4” S&R

Solid Drawer Fronts

Finland Inset

MDF 13/16” Thick

14.00

14.00

10.00

with R-8 or R-9 Outside Edge

PG Poplar Frame with MDF

14.00

14.00

10.00

PG Alder Frame with MDF Panel

14.75

14.75

11.25

PG Maple Frame with MDF

15.50

15.50

13.00

PG Maple Frame & Panel

17.25

17.25

13.00

Alder - Select

17.25

17.25

13.00

Alder - Rustic

19.25

19.25

14.50

Beech - Select

17.25

17.25

13.00

Cherry - Select

22.50

22.50

21.50

Hickory - Select (Calico)

21.00

21.00

18.50

Maple - Natural*

18.75

18.75

13.00

Maple - Select

19.00

19.00

17.75

Red Oak - Select

17.25

17.25

13.00

Walnut - Select

31.25

31.25

26.25

White Oak - Select

25.50

25.50

22.50

White Oak - Rift (Straight Grain)

31.25

31.25

26.25

MP-27 Inset with R-4 or R-5 Outside Edge

*Inset: Whole Piece, Face ONLY! 68

MP-27 Inset

Profile Page

Stile & Rail Options 2 1/4” Stiles & Rails: standard with Rosewood Outside Edge

Finland Inset (R-8 or R-9 outside edge)

142

2 1/2” Stiles & Rails: refer to page #70 for pricing + $3.00 per sq. ft. for Rosewood Edge

MP-27 Inset (R-4 or R-5 outside edge)

141

3” Stiles & Rails: refer to page #72 for pricing + $3.00 per sq. ft. for Rosewood Edge Center Stile: add 25% to sq. ft. price

5-Piece Drawer Front Stile & Rail Options use matching door sq. ft. price + option charge per drawer front 1 3/4” Stiles & Rails: standard

$8.00 Per Piece

2” Stiles & Rails: no upcharge

Frame Thickness

Option Charge

Minimum Sizing Chart for doors and 5-piece drawer fronts

Page

1/4” Plywood or 1/4” MDF

178

7/8” Thick: add 10% per sq. ft.

3/8” Thick “VP” Panel (veneer)

178

1” Thick: add 30% per sq. ft.

3/8” Thick “F” Panel (solid wood or MDF)

178

13/16” Thick: standard 3/4” Thick: no upcharge

Profiles

Profile Options

Profile Page

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF) 3/8” Thick “VP” Panel (veneer)

Standard Outside Edges

Use Mitered Solid door pricing per sq. ft. + $3.00 per sq. ft. for rosewood edge 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60 Available in all stocked wood species & MDF Use Mitered Solid door pricing per sq. ft. + $3.00 per sq. ft. for rosewood edge 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60 Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain) Finland Inset: Standard with R-8 (no lip) or R-9 (fingerpull) Outside Edge MP-27 Inset: Standard with R-4 (no lip) or R-5 (fingerpull) Outside Edge

Mitered 2 1/4” Inset Series

Door Styles

148

148

125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

69

Mitered 2 1/2” Inset Series

Aspen

Cortina Inset

Door Styles

Materials

Naples Inset

Orlando

Mitered Inset 2 1/2” S&R

Cut for Glass 2 1/2” S&R

Solid Drawer Fronts

Aspen

MDF 13/16” Thick

12.00

12.00

10.00

Cortina Inset

PG Poplar Frame with MDF

12.00

12.00

10.00

Islander

PG Alder Frame with MDF Panel

12.75

12.75

11.25

Mitered #24 Inset

PG Maple Frame with MDF

13.50

13.50

13.00

Naples Inset

PG Maple Frame & Panel

15.50

15.50

13.00

Orlando

Alder - Select

15.50

15.50

13.00

Alder - Rustic

17.75

17.75

14.50

Beech - Select

15.50

15.50

13.00

Cherry - Select

20.75

20.75

21.50

Hickory - Select (Calico)

19.25

19.25

18.50

Maple - Natural*

16.75

16.75

13.00

Maple - Select

17.25

17.25

17.75

Red Oak - Select

15.50

15.50

13.00

Walnut - Select

30.00

30.00

26.25

White Oak - Select

27.25

27.25

22.50

White Oak - Rift (Straight Grain)

30.00

30.00

26.25

*Inset: Whole Piece, Face ONLY! 70

Islander

Profile Page

Stile & Rail Options

Aspen

143

2 1/2” Stiles & Rails: standard

Cortina Inset

143

2 1/4” Stiles & Rails: refer to page #64 for pricing (Not available for Cortina Inset & Orlando door style)

Islander

143

Mitered #24 Inset

143

Naples Inset

143

1 3/4” Stiles & Rails: standard

$8.00 Per Piece

Orlando

143

2” Stiles & Rails: no upcharge (Not available for Cortina Inset)

$8.00 Per Piece

3” Stiles & Rails: refer to page #72 for pricing (Not available for Cortina Inset) Center Stile: add 25% to sq. ft. price 5-Piece Drawer Front Stile & Rail Options use matching door sq. ft. price + option charge per drawer front

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Option Charge

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

178

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

178

1” Thick: add 30% to sq. ft. price

3/8” Thick “F” Panel (solid wood or MDF)

178

Profiles

Profile Options

Profile Page

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Mitered Solid door pricing per sq. ft. 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60 Available in all stocked wood species & MDF

148

3/8” Thick “VP” Panel (veneer)

Use Mitered Solid door pricing per sq. ft. 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60 Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

Standard Outside Edges

49 Standard Outside Edge Profiles Cortina Inset has no options on outside edge detail

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

Mitered 2 1/2” Inset Series

Door Style

148

120-124 125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

71

Mitered 3” Inset Series

Door Styles

Mitered Inset 3” S&R

Cut for Glass 3” S&R

Solid Drawer Fronts

California Inset

MDF 13/16” Thick

12.50

12.50

10.00

Mitered #6 Inset

PG Poplar Frame with MDF Panel

12.50

12.50

10.00

Mitered #7 Inset

PG Alder Frame with MDF Panel

13.50

13.50

11.25

Mitered #8 Inset

PG Maple Frame with MDF Panel

14.00

14.00

13.00

Mitered #17 Inset

PG Maple Frame & Panel

16.25

16.25

13.00

MP-19 Inset

Alder - Select

16.25

16.25

13.00

MP-23 Inset

Alder - Rustic

18.00

18.00

14.50

MP-49 Inset

Beech - Select

16.25

16.25

13.00

Monterey

Cherry - Select

22.00

22.00

21.50

New England

Hickory - Select (Calico)

20.25

20.25

18.50

New Hampshire

Maple - Natural*

17.75

17.75

13.00

Newport

Maple - Select

18.00

18.00

17.75

Richmond

Red Oak - Select

16.25

16.25

13.00

Ridgeland

Walnut - Select

32.00

32.00

26.25

Titan

White Oak - Select

24.50

24.50

22.50

Woodside

White Oak - Rift (Straight Grain)

32.00

32.00

26.25

MP-201 Inset Matches AM-5 See Profile Page 147 MP-213 Inset Matches AM-6 See Profile Page 147 MP-36 MP-114 MP-210 MP-216 MP-242 MP-246 MP-248

72

Materials

*Inset: Whole Piece, Face ONLY!

California Inset

146

Mitered #6 Inset

146

Mitered #7 Inset

146

Mitered #8 Inset

146

Mitered #17 Inset

146

MP-19 Inset

144

MP-23 Inset

144

MP-49 Inset

145

Monterey

144

New England

139 & 144

New Hampshire

138 & 144

Newport

145

Richmond

145

Ridgeland

145

Titan

144

Woodside

145

Stiles & Rails Options 3” Stiles & Rails: standard 2 1/4” Stiles & Rails: refer to page #64 for pricing (Not available for Mitered #6, Mitered #7, Mitered #8 , Mitered #17, Monterey, MP-19, MP-49, & Newport) 2 1/2” Stiles & Rails: refer to page #70 for pricing (Not available for Monterey, MP-19, MP-49, New England & Newport)

5-Piece Drawer Front Stile & Rail Options use matching door sq. ft. price + option charge per drawer front

Option Charge

1 3/4” Stiles & Rails: standard (Not available for MP-49)

$8.00 Per Piece

2” Stiles & Rails: no upcharge (Not available for MP-19 & New England)

$8.00 Per Piece

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

178

7/8” Thick: add 10% per sq. ft.

3/8” Thick “VP” Panel (veneer)

178

1” Thick: add 30% per sq. ft.

3/8” Thick “F” Panel (solid wood or MDF)

178

Profiles

Profile Options

Profile Page

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Mitered Solid door pricing per sq. ft. 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60 Available in all stocked wood species & MDF

148

3/8” Thick “VP” Panel (veneer)

Standard Outside Edges Rosewood Outside Edges

Use Mitered Solid door pricing per sq. ft. 2 1/4” pricing page #52, 2 1/2” pricing page #58, 3” pricing page #60 Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

49 Standard Outside Edge Profiles New England, New Hampshire & Newport recommended with A7 (no lip) or A11 (fingerpull) R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

Mitered 3” Inset Series

Profile Page

Door Style

148

120-124 125

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options)

Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options)

Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite.

Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

73

Mitered 3” Inset Series 74

California Inset

Mitered #6 Inset

Mitered #7 Inset

Mitered #8 Inset

Mitered #17 Inset

MP-19 Inset

MP-23 Inset

MP-49 Inset

Monterey

Mitered 3” Inset Series

New England

New Hampshire

Newport

Richmond

Ridgeland

Titan

Woodside 75

Mitered Solid Applied Molding Series 76

Napa

Stanford

Florence

R-3 Outside Edge (optional)

R-3 Outside Edge (optional)

Cut for Glass Napa & Stanford 2 1/4” S&R

Florence 3” S&R

Solid Drawer Fronts

27.25

19.25

22.50

10.00

23.75

27.25

19.25

22.50

10.00

24.50

28.00

19.75

23.25

11.25

Napa & Stanford 2 1/4” S&R

Florence 3” S&R

MDF 13/16” Thick

23.75

PG Poplar Frame with MDF Panel PG Alder Frame with MDF Panel

Materials

PG Maple Frame with MDF Panel

25.00

28.75

20.50

24.00

13.00

PG Maple Frame & Panel

29.75

34.25

24.25

27.25

13.00

Alder - Select

29.75

34.25

24.25

27.25

13.00

Alder - Rustic

33.50

38.50

27.50

30.50

14.50

Beech - Select

29.75

34.25

24.25

27.25

13.00

Cherry - Select

38.25

44.25

29.75

33.00

21.50

Cherry - Rustic

43.00

49.75

33.50

36.75

24.00

Hickory - Select (Calico)

34.00

39.25

28.25

31.50

18.50

Hickory - Rustic (Calico)

38.25

44.00

31.50

35.50

20.50

Mahogany, African (Flat Sawn)

42.00

49.25

35.50

39.75

24.75

Mahogany, African (Ribbon)

42.00

49.25

35.50

39.75

24.75

Maple-Natural

28.75

33.00

25.75

28.75

13.00

Maple - Select

35.25

40.75

26.25

29.25

17.75

Maple - Rustic

39.75

45.75

29.00

32.50

20.25

Pine - Knotty

31.25

36.25

25.00

28.00

17.75

Red Oak - Select

29.75

34.25

24.25

27.25

13.00

Sapele - (Flat Sawn)

42.50

49.50

35.75

40.00

25.00

Sapele - (Ribbon)

42.50

49.50

35.75

40.00

25.00

Walnut - Select

44.75

52.00

40.50

44.25

26.25

Walnut - Rustic

47.75

55.50

41.25

47.25

26.75

White Oak - Select

41.00

47.25

34.25

36.25

22.50

White Oak - Rustic

38.25

44.00

31.50

35.50

20.50

White Oak - Rift (Straight Grain)

44.75

52.00

40.50

44.25

26.25

White Oak - Quarter Sawn

42.50

49.50

35.75

40.00

25.00

Standard Profiles

Napa

AM-1 Molding, Mitered #1 Inside Edge, Solid Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Stanford

AM-5 Molding, Mitered #1 Inside Edge, Solid Panel, D-3 (square) Outside Edge and 2 1/4” Stiles & Rails

Florence

AM-8 Molding, Mitered #1 Inside Edge, Solid Panel, D-3 (square) Outside Edge and 3” Stiles & Rails

Profiles

Profile Options

Standard Inside Edge

Mitered #1

Applied Moldings

AM-1, AM-2, AM-3, AM-4, AM-5, AM-6, AM-7, AM-8, AM-9, AM-10, AM-11, AM-13, AM-14, AM-15, AM-16, AM-17, AM-18 & AM-19

Large Solid Panels

Large C, Large Cove, Large D, Large G, Large H, Large J, Large K, Large L, Large R & Large S

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

Stile & Rail Options 2 1/4” Stiles & Rails: use Napa/Stanford pricing 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: use Florence pricing

Profile Page 140 152-153 151 120-124

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front 1 3/4” or 2” Stiles & Rails (must specify) Non-standard stile & rail sizes: call for pricing

125

Option Charge $10.00 Per Piece

Mitered Solid Applied Molding Series

Door Style

Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard 3/4” Thick: no upcharge

Large Solid Panels

Page 180

7/8” Thick: add 10% to sq. ft. price 1” Thick: add 30% to sq. ft. price Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $14.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $16.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Solid with Applied Molding, Designer, Routed & Solid with Rosewood Outside Edge Drawer Fronts: minimum 1 sq. ft.

Profile Page

Solid Drawer Fronts with Applied Molding: use solid drawer front sq. ft. price + molding charge ($25.00 to $75.00) per piece

160-161

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

77

Mitered Inset Applied Molding Series

Calistoga

Harvard

San Fernando

Milano

R-3 Outside Edge (optional)

R-3 Outside Edge (optional)

R-3 Outside Edge (optional) Shown with 3/8” BeadedGroove Panel (optional)

R-3 Outside Edge (optional)

Materials

Calistoga, Harvard & San Fernando 2 1/4” S&R

Milano 3” S&R

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

78

MDF 13/16” Thick

19.25

22.50

10.00

PG Poplar Frame with MDF

19.25

22.50

10.00

PG Alder Frame with MDF

19.75

23.25

11.25

PG Maple Frame with MDF

20.50

24.00

13.00

PG Maple Frame & Panel

24.25

27.25

13.00

Alder - Select

24.25

27.25

13.00

Alder - Rustic

27.50

30.50

14.50

Beech - Select

24.25

27.25

13.00

Cherry - Select

29.75

33.00

21.50

Hickory - Select (Calico)

28.25

31.50

18.50

Maple - Natural*

25.75

28.75

13.00

Maple - Select

26.25

29.25

17.75

Red Oak - Select

24.25

27.25

13.00

Walnut - Select

40.50

44.25

26.25

White Oak - Select

34.25

36.25

22.50

White Oak - Rift (Straight

40.50

44.25

26.25

*Inset: Whole Piece, Face ONLY!

Standard Profiles

Calistoga

AM-1 Molding, Mitered #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge & 2 1/4” Stiles & Rails

Harvard

AM-6 Molding, Mitered #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge & 2 1/4” Stiles & Rails

San Fernando

AM-2 Molding, Mitered #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge & 2 1/4” Stiles & Rails

Milano

AM-8 Molding, Mitered #1 Inside Edge, Plywood Panel, D-3 (square) Outside Edge & 3” Stiles & Rails

MP-243

AM-145 Molding, Mitered MP-243 Inside Edge, Plywood Panel, D-3 (square) Outside Edge & 2 1/4” Stiles & Rails Stile & Rail Options

2 1/4” Stiles & Rails: use Calistoga pricing 2 1/2” Stiles & Rails: add 10% to sq. ft. price 3” Stiles & Rails: use Milano pricing

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front 1 3/4” or 2” Stiles & Rails (must specify) Non-standard stile & rail sizes: call for pricing

Option Charge $8.00 Per Piece

Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Profiles

Profile Options

Profile Page

Standard Inside Edge

Mitered #1

Applied Moldings

AM-1, AM-2, AM-3, AM-4, AM-5, AM-6, AM-7, AM-8, AM-9, AM-10, AM-11, AM-13 AM-14, AM-15, AM-16, AM-17, AM-18 & AM-19

Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

1/2” Thick “F” Panel (solid wood) 3/8” Thick “F” Panel (MDF)

Use Mitered Solid Applied Molding door pricing per sq. ft. Refer to page #76 for pricing Available in all stocked wood species and MDF

148

3/8” Thick “VP” Panel (veneer)

128

Use Mitered Solid Applied Molding door pricing per sq. ft. Refer to page #76 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

Standard Outside Edges

49 Standard Outside Edge Profiles

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft.

Frame Thickness

148 120-124

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

152-153

Mitered Inset Applied Molding Series

Door Style

125

Page

3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

181

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

181

1” Thick: add 30% to sq. ft. price

1/2” Thick “F” Panel (solid wood) or 3/8” Thick “F” Panel (MDF)

181

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $14.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $16.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Solid with Applied Molding, Designer, Routed & Solid with Rosewood Outside Edge Drawer Fronts: minimum 1 sq. ft.

Profile Page

Solid Drawer Fronts with Applied Molding: use solid drawer front sq. ft. price + molding charge ($25.00 to $75.00) per piece

160-161

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

79

Mitered Solid Rope Molding Series

Nantucket

Maine

R-3 Outside Edge (optional)

Cut for Glass Materials

MDF 13/16” Thick

80

Hartford

Nantucket 2 1/2” S&R

Hartford & Maine 3” S&R

35.00

38.50

Nantucket 2 1/2” S&R

Hartford & Maine 3” S&R

Solid Drawer Fronts

30.25

33.50

10.00

PG Poplar Frame with MDF Panel

35.00

38.50

30.25

33.50

10.00

PG Alder Frame with MDF Panel

35.50

39.25

31.00

34.50

11.25

PG Maple Frame with MDF Panel

36.25

40.00

32.00

35.00

13.00

PG Maple Frame & Panel

40.75

45.25

36.75

39.75

13.00

Alder - Select

40.75

45.25

36.75

39.75

13.00

Alder - Rustic

45.75

50.75

41.25

44.75

14.50

Beech - Select

40.75

45.25

36.75

39.75

13.00

Cherry - Select

49.25

55.50

42.50

45.50

21.50

Cherry - Rustic

55.25

62.25

47.75

51.00

24.00

Hickory - Select (Calico)

45.00

50.50

40.75

44.25

18.50

Hickory - Rustic (Calico)

50.50

56.75

45.75

49.75

20.50

Mahogany, African (Flat Sawn)

53.75

60.75

48.75

52.50

24.75

Mahogany, African (Ribbon)

53.75

60.75

48.75

52.50

24.75

Maple-Natural

39.75

44.25

38.50

41.25

13.00

Maple - Select

46.50

52.00

39.00

42.00

17.75

Maple - Rustic

52.25

58.50

43.25

46.25

20.25

Pine - Knotty

42.75

47.25

37.75

40.50

17.75

Red Oak - Select

40.75

45.25

36.75

39.75

13.00

Sapele - (Flat Sawn)

54.25

61.00

49.00

53.25

25.00

Sapele - (Ribbon)

54.25

61.00

49.00

53.25

25.00

Walnut - Select

57.00

64.25

54.25

58.50

26.25

Walnut - Rustic

60.75

68.25

55.00

59.75

26.75

White Oak - Select

54.50

61.00

49.50

53.50

22.50

White Oak - Rustic

50.50

56.75

45.75

49.75

20.50

White Oak - Rift (Straight Grain)

57.00

64.25

54.25

58.50

26.25

White Oak - Quarter Sawn

54.25

61.00

49.00

53.25

25.00

Standard Profiles

Nantucket

147

3/8” Rope Molding, Solid Panel S-2 (fingerpull) & S-3 (no lip) and 2 1/2” Stiles & Rails

Hartford

147

3/8” Rope Molding, Solid Panel, A-7 (no lip) or A-11 (fingerpull) and 3” Stiles & Rails

Maine

139 & 147 1/4” Rope Molding, Solid Panel, A-7 (no lip) or A-11 (fingerpull) and 3” Stiles & Rails Stiles & Rails Options

2 1/4” Stile & Rails: use Nantucket pricing 2 1/2” Stile & Rails: use Nantucket pricing Maine not available in 2 1/2” Stiles & Rails

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

1 3/4” or 2” Stiles & Rails (must specify) Non-standard stile & rail sizes: call for pricing

Option Charge $10.00 Per Piece

3” Stile & Rails: use Hartford/Maine pricing Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price Profile Options

Profile Page

C, E, F, H, I, J, L, R, S, Small S, U, Y, Z & Small Z

148-150

A, D, G, N, Large P, P, Small P, T, V, W & X: add 10% to sq. ft. price

148-150

Profiles Standard Solid Panels Premium Solid Panels Standard Outside Edges Rosewood Outside Edges

M Panel: add 20% to sq. ft. price

148

49 Standard Outside Edge Profiles

120-124

Maine recommended with A7 (no lip) or A11 (fingerpull) Outside Edge profiles

120

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft. Rosewood outside edge details not available on Maine door style

125

Frame Thickness

Minimum Sizing Chart for doors and 5-piece drawer fronts

13/16” Thick: standard

Mitered Solid Rope Molding Series

Profile Page

Door Style

Page

3/4” Thick: no upcharge

Standard Solid Panels

178-179

7/8” Thick: add 10% to sq. ft. price

Premium Solid Panels

178-179

1” Thick: add 30% to sq. ft. price Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $14.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $16.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

81

Mitered Inset Rope Molding Series

Cape Cod

New Haven

Materials

Cape Cod 2 1/2” S&R

Vermont

New Haven & Vermont 3” S&R

Solid Drawer Fronts

Use same square foot price for Cut for Glass Doors Use PG Maple Frame with MDF Panel pricing when ordering Paint Grade Maple cut for glass doors.

MDF 13/16” Thick

30.25

33.50

10.00

PG Poplar Frame with MDF Panel

30.25

33.50

10.00

PG Alder Frame with MDF Panel

31.00

34.50

11.25

PG Maple Frame with MDF Panel

32.00

35.00

13.00

PG Maple Frame & Panel

36.75

39.75

13.00

Alder - Select

36.75

39.75

13.00

Alder - Rustic

41.25

44.75

14.50

Beech - Select

36.75

39.75

13.00

Cherry - Select

42.50

45.50

21.50

Hickory - Select (Calico)

40.75

44.25

18.50

Maple - Natural*

38.50

41.25

13.00

Maple - Select

39.00

42.00

17.75

Red Oak - Select

36.75

39.75

13.00

Walnut - Select

54.25

58.50

26.25

White Oak - Select

49.50

53.50

22.50

White Oak - Rift (Straight Grain)

54.25

58.50

26.25

*Inset: Whole Piece, Face ONLY! 82

Standard Profiles

147

3/8” Rope Molding, Plywood Panel, S-2 (fingerpull) & S-3 (no lip) and 2 1/2” Stiles & Rails

147

3/8” Rope Molding, Plywood Panel, A-7 (no lip) or A-11 (fingerpull) and 3” Stiles & Rails

139 & 147

1/4” Rope Molding, Plywood Panel, A-7 (no lip) or A-11 (fingerpull) and 3” Stiles & Rails

Cape Cod New Haven Vermont

Stiles & Rails Options

5-Piece Drawer Front Rail Options use matching door sq. ft. price + option charge per drawer front

2 1/4” Stile & Rails: use Cape Cod pricing 2 1/2” Stile & Rails: use Cape Cod pricing Vermont not available in 2 1/2” Stiles & Rails

Option Charge

1 3/4” or 2” Stiles & Rails (must specify) Non-standard stile & rail sizes: call for pricing

$8.00 Per Piece

Profile Options

Profile Page

3” Stile & Rails: use New Haven/Vermont pricing Non-standard stile & rail sizes: call for pricing Center Stile: add 25% to sq. ft. price

Profiles Standard Inset Panel

1/4” Plywood or 1/4” MDF

148

3/8” Thick “F” Panel (solid wood or MDF)

Use Mitered Solid Rope Molding door pricing per sq. ft. See page #80 for pricing Available in all stocked wood species & MDF

148

3/8” Thick “VP” Panel (veneer)

Use Mitered Solid Rope Molding door pricing per sq. ft. See page #80 for pricing Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select Whole Piece Face, Walnut-Select, White Oak-Select, White Oak-Rift (Straight Grain)

148

Standard Outside Edges

49 Standard Outside Edge Profiles Vermont recommended with A7 (no lip) or A11 (fingerpull) Outside Edge profiles

Rosewood Outside Edges

R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Outside Edge: add $3.00 per sq. ft. Rosewood outside edge details not available on Vermont door style

125

Minimum Sizing Chart for doors and 5-piece drawer fronts

Page

Frame Thickness 13/16” Thick: standard 3/4” Thick: no upcharge

1/4” Plywood or 1/4” MDF

Mitered Inset Rope Molding Series

Profile Page

Door Style

120-124 120

178

7/8” Thick: add 10% to sq. ft. price

3/8” Thick “VP” Panel (veneer)

178

1” Thick: add 30% to sq. ft. price

3/8” Thick “F” Panel (solid wood or MDF)

178

Door Specifications: All doors are minimum 2 sq. ft. All doors over 24” in width or 60” in height are not guaranteed against warping and twisting. Center Rail required at 50” or above in height (refer to page #111). Doors ordered 50” or above without a center rail are not guaranteed against warping and twisting. Glass Frames: (refer to page #114 for glass route options) Standard route accommodates one piece of glass and comes standard with rubber stop groove. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. French Lites: (refer to page #114 for glass route options) Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $14.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $16.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Solid Drawer Fronts with Standard Outside Edge Profiles: minimum 1 sq. ft. Designer, Routed & Solid with Rosewood Outside Edge Drawer Front Options: minimum 1 sq. ft.

Profile Page

Designer Drawer Fronts: use designer drawer front sq. ft. price

154-155

Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece

156-157

Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9: use solid drawer front sq. ft. price + $10.00 per piece

158

Solid Drawer Fronts with R-4 & R-5: use solid drawer front sq. ft. price + $14.00 per piece

158

83

3/4” Thick Veneer Edge Banded Doors

Materials

1.5 Mil

Raw MDF with Solid Paint Grade Maple Edge

10.25

Alder - Select Plain Sliced

20.50

Beech - Select Plain Sliced

18.75

Birch-Natural (Calico) Whole Piece Face

15.75

Cherry - Select Plain Sliced

20.75

Hickory-Select (Calico) Plain Sliced

20.75

Mahogany, African Plain Sliced

21.00

Maple - Select Whole Piece Face

18.75

Red Oak - Select Plain Sliced

18.75

Walnut - Select Plain Sliced

25.75

White Oak-Select Plain Sliced

22.00

White Oak - Rift (Straight Grain)

25.75

Unless noted above, all 3/4” veneers are premium A-1 plain sliced & book matched. All doors are manufactured with solid wood edgebanding.

Standard with a MDF core. Doors and drawer fronts come standard with vertical grain. Horizontal Grain on doors: add 50% to sq. ft. price (50% upcharge does not include grain and/or book & bank matching). GRAIN, BANK & BOOK MATCHING (detailed layout drawings are required): add 50% to sq. ft. price. Specialty Veneers are available for full jobs only (subject to availability and quote).

Bank & Book Match

Bank & Book Match

shown with vertical grain

shown with horizontal grain

1.5 Mil edgebanding 84

For wood sample pictures see page 216 .

3/4” Thick Veneer Edge Banded Echo Wood Panels

Unfinished 0.5 Mil

Material Echo Wood Qtr Champagne

24.50

Echo Wood Qtr Cherry

24.50

Echo Wood Qtr Gun Metal Ebony

24.50

Echo Wood Qtr Macassar Ebony

24.50

Echo Wood Qtr Maple

24.50

Echo Wood PS Rosewood

24.50

Echo Wood Slate

24.50

Echo Wood Qtr Teak

24.50

Echo Wood VG Fir

24.50

Echo Wood PS Walnut

24.50

Echo Wood Qtr Walnut

24.50

Echo Wood Qtr African Wenge

24.50

Echo Wood Qtr Wenge

24.50

Echo Wood Monterey White Oak

24.50

Echo Wood Napa White Oak

24.50

Echo Wood Rift White Oak

24.50

Echo Wood Qtr Zebrano

24.50

Applied Moldings are not available on Echo Wood doors. Applied Moldings with miter or butt joints can be added to any Edgebanded Veneer door.

0.5 Mil 1 8"

For pricing see below:

AM-137 miter only

Use standard sq.ft. door pricing + molding charges. up to 2.25 sq.ft. add: $25.00 per piece over 2.25 sq.ft. add: $50.00 per piece

5/8” x 1/4”

over 50” height/width add:$75.00 per piece 3/4” x 1/4” Other materials available at: www.hardwoods-inc.com

1 1/4” x 1/4”

For wood sample pictures see pages 216 & 217 .

85

Cope ‘N Stick French Lite

Customize Your Doors French Lites are available with many options. Below are a few samples.

Atlanta French Lite

Shown with standard 4 lite pattern #2 Inside Edge & B-3 Outside Edge

Sierra French Lite

Shown with special placement 9 lite pattern #3 Inside Edge & B-3 Outside Edge

86

Shaker French Lite

Shown with standard 6 lite pattern #1 Inside Edge & D-3 Outside Edge

Sierra French Lite

Shown with special placement 11 lite pattern #3 Inside Edge & B-3 Outside Edge

Cope ‘N Stick French Lites: Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

French Lites are available with many options. Below are a few samples.

Diablo French Lite

Shown with standard 4 lite pattern AM-8 Molding & A-5 Outside Edge

Laguna French Lite

Shown with standard 4 lite pattern AM-2 Molding & A-5 Outside Edge

Cascade French Lite

Shown with standard 6 lite pattern AM-6 Molding & A-5 Outside Edge

Cope ‘N Stick Applied Molding French Lite

Customize Your Doors

San Marino French Lite

Shown with standard 6 lite pattern AM-1 Molding & A-5 Outside Edge

Cope ‘N Stick Applied Molding French Lites: Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

87

Mitered French Lite

Customize Your Doors French Lites are available with many options. Below are a few samples.

Sheffield French Lite

Shown with standard 6 lite pattern R-3 Outside Edge (optional)

Delaware French Lite

Shown with standard 4 lite pattern A-7 Outside Edge

88

Manhattan French Lite

Shown with standard 4 lite pattern S-3 Outside Edge

Sheffield French Lite

Shown with special placement 11 lite pattern

S-3 Outside Edge

Michael French Lite

Shown with special placement 9 lite pattern A-6 Outside Edge

Malibu French Lite

Shown with standard 6 lite pattern S-3 Outside Edge

Mitered French Lites: Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

French Lites are available with many options. Below are a few samples.

Nantucket French Lite

Shown with standard 6 lite pattern Rope Molding R-3 Outside Edge (optional)

Florence French Lite

Shown with standard 6 lite pattern AM-8 Molding D-3 Outside Edge

Napa French Lite

Shown with standard 6 lite pattern AM-1 Molding R-3 Outside Edge (optional)

Napa French Lite

Shown with standard 4 lite pattern AM-19 Molding R-4 Outside Edge (optional)

Stanford French Lite

Shown with standard 4 lite pattern AM-6 Molding R-3 Outside Edge (optional)

Mitered Applied Molding French Lite

Customize Your Doors

Napa French Lite

Shown with standard 4 lite pattern AM-5 Molding R-3 Outside Edge (optional)

Mitered Applied Molding French Lites: Use glass door sq. ft. price + per lite charge. Minimum lite opening 2 1/2” x 2 1/2”. Standard placement of lites: $14.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $16.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual Lites (this accommodates individual pieces of glass): use per lite charge + an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door.

89

Specialty French Lite Mullions

SFL-111

Use inset sq. ft. price + $250.00 per door

SFL-134

Use inset sq. ft. price + $350.00 per door

SFL-108

Use inset sq. ft. price + $300.00 per door

SFL-135

Use inset sq. ft. price + $350.00 per door

SFL-106

Use inset sq. ft. price + $350.00 per door

SFL-110

Use inset sq. ft. price + $350.00 per door

SFL-141

Use inset sq. ft. price + $450.00 per door

SFL-109

Use inset sq. ft. price + $450.00 per door

Available in both Cope ‘N Stick and Mitered

90

Specialty French Lites : Use matching inset door style sq. ft. price + per door charge. Available in both Cope ‘N Stick & Mitered. Available in all door styles and thicknesses, with or without Applied Moldings. All option charges apply to sq. ft. cost (Example: larger stiles & rails and thicker doors are subject to an up charge). Pricing is based on doors that are up to 48” in height. Doors over 48” must be quoted. The door height must be more than double the width of all arched mullion designs. We will provide a CAD drawing for your approval prior to construction. Lead time is between 2 to 4 weeks, once CAD drawings have been approved Not available with individual lites. Standard route accommodates one piece of glass.

SFL-137

Use inset sq. ft. price + $375.00 per door

SFL-142

Use inset sq. ft. price + $300.00 per door

SFL-143

Use inset sq. ft. price + $475.00 per door

SFL-138

Use inset sq. ft. price + $350.00 per door

Specialty French Lite Mullions

SFL-113

Use inset sq. ft. price + $200.00 per door

SFL-139

Use inset sq. ft. price + $525.00 per door

Available in both Cope ‘N Stick and Mitered Specialty French Lites : Use matching inset door style sq. ft. price + per door charge. Available in both Cope ‘N Stick & Mitered. Available in all door styles and thicknesses, with or without Applied Moldings. All option charges apply to sq. ft. cost (Example: larger stiles & rails and thicker doors are subject to an up charge). Pricing is based on doors that are up to 48” in height. Doors over 48” must be quoted. The door height must be more than double the width of all arched mullion designs. We will provide a CAD drawing for your approval prior to construction. Lead time is between 2 to 4 weeks, once CAD drawings have been approved Not available with individual lites. Standard route accommodates one piece of glass.

91

Specialty French Lite Mullions

SFL-133

Call for pricing

SFL-124

Use inset sq. ft. price + $300.00 per door

SFL-125

Use inset sq. ft. price + $500.00 per door

Available in both Cope ‘N Stick and Mitered

92

Specialty French Lites : Use matching inset door style sq. ft. price + per door charge. Available in both Cope ‘N Stick & Mitered. Available in all door styles and thicknesses, with or without Applied Moldings. All option charges apply to sq. ft. cost (Example: larger stiles & rails and thicker doors are subject to an up charge). Pricing is based on doors that are up to 48” in height. Doors over 48” must be quoted. The door height must be more than double the width of all arched mullion designs. We will provide a CAD drawing for your approval prior to construction. Lead time is between 2 to 4 weeks, once CAD drawings have been approved Not available with individual lites. Standard route accommodates one piece of glass.

SFL-144

Use inset sq. ft. price + $550.00 per door

SFL-127

Use inset sq. ft. price + $600.00 per door

SFL-145

Use inset sq. ft. price + $600.00 per door

SFL-130

Specialty French Lite Mullions

SFL-126

Use inset sq. ft. price + $600.00 per door

Use inset sq. ft. price + $600.00 per door

SFL-131

Use inset sq. ft. price + $700.00 per door

Available in both Cope ‘N Stick and Mitered Specialty French Lites : Use matching inset door style sq. ft. price + per door charge. Available in both Cope ‘N Stick & Mitered. Available in all door styles and thicknesses, with or without Applied Moldings. All option charges apply to sq. ft. cost (Example: larger stiles & rails and thicker doors are subject to an up charge). Pricing is based on doors that are up to 48” in height. Doors over 48” must be quoted. The door height must be more than double the width of all arched mullion designs. We will provide a CAD drawing for your approval prior to construction. Lead time is between 2 to 4 weeks, once CAD drawings have been approved Not available with individual lites. Standard route accommodates one piece of glass.

93

Designer Standard Panel Solid Drawer Fronts

Drawer Front Style

Minimum Size

Profile Page

** Arizona

5” x 4”

154

Minimum 1 sq. ft. on drawer fronts.

** Texas

5” x 4”

154

*= No warranty on painting any Solid Wood Drawer Fronts.

** Utah

5” x 4 1/4”

154

DR-C

5” x 3 1/2”

154

MDF 3/4” Thick

12.50

17.50

DR-E

5” x 3 1/2”

154

PG Poplar

12.50

17.50

DR-H

5” x 3 1/2”

154

PG Alder

13.75

19.25

DR-J

5” x 3 1/2”

154

PG Maple

18.25

25.50

DR-R

5” x 3 1/2”

154

Alder - Select

18.25

25.50

DR-S

5” x 3 1/2”

154

Alder - Rustic

20.50

28.75

DR-Small S

5” x 3 1/2”

154

Beech - Select

18.25

25.50

DR-Z

5” x 3 1/2”

154

Cherry - Select

26.75

37.25

DR-Small Z

5” x 3 1/2”

154

Cherry - Rustic

29.75

41.50

Hickory - Select (Calico)

23.00

32.25

Hickory - Rustic (Calico)

25.75

36.00

Mahogany, African (Flat

30.00

41.75

Mahogany, African (Ribbon)

31.00

43.25

Maple - Natural

18.25

25.50

Maple - Select

22.25

31.00

Maple - Rustic

24.75

34.75

Pine - Knotty

22.25

31.00

Red Oak - Select

16.25

22.50

Sapele - (Flat Sawn)

30.00

41.75

Sapele - (Ribbon)

31.25

43.50

Walnut - Select

33.00

45.50

Walnut - Rustic

35.00

48.75

White Oak - Select

27.75

38.75

White Oak - Rustic

25.75

36.00

White Oak - Rift (Straight

33.00

45.50

White Oak - Quarter Sawn

31.25

43.50

**Not available in 13/16” thick

94

Materials

13/16” thick

1” thick

We recommend and warranty MDF Solid Drawer Fronts.

Texas

Utah

DR-C

DR-E

DR-H

DR-J

DR-R

DR-S

DR-Small S

DR-Z

DR-Small Z

Designer Standard Panel Solid Drawer Fronts

Arizona

95

Designer Premium Panel Solid Drawer Fronts 96

Drawer Front Style

Minimum Size

Profile Page

DR-D

5” x 3 1/2”

155

Minimum 1 sq. ft. on drawer fronts.

DR-G

5” x 3 1/2”

155

*= No warranty on painting any Solid Wood Drawer Fronts.

DR-Large P

5” x 4 3/4”

155

DR-P

5” x 3 1/2”

155

MDF

12.50

15.75

DR-Small P

5” x 3 1/2”

155

PG Poplar

12.50

17.50

DR-T

5” x 4 1/4”

155

PG Alder

13.75

19.25

DR-W

5” x 3 1/2”

155

PG Maple

16.50

22.75

DR-X

5” x 4 3/4”

155

Alder - Select

16.50

22.75

DR-Y

5” x 3 1/2”

155

Alder - Rustic

18.25

25.50

Beech - Select

16.50

22.75

Cherry - Select

26.75

37.25

Cherry - Rustic

29.75

41.50

Hickory - Select (Calico)

23.00

32.25

Hickory - Rustic (Calico)

25.75

35.75

Mahogany, African (Flat

30.00

41.75

Mahogany, African (Ribbon)

31.00

43.25

Maple - Natural

18.25

25.50

Maple - Select

22.25

31.00

Maple - Rustic

25.50

35.50

Pine - Knotty

22.25

31.00

Red Oak - Select

16.25

22.50

Sapele - (Flat Sawn)

30.00

41.75

Sapele - (Ribbon)

31.25

43.50

Walnut - Select

33.00

45.50

Walnut - Rustic

34.75

48.50

White Oak - Select

28.00

39.00

White Oak - Rustic

25.75

35.75

White Oak - Rift (Straight

33.00

45.50

White Oak - Quarter Sawn

31.25

43.50

Materials

13/16” thick

1” thick

We recommend and warranty MDF Solid Drawer Fronts.

DR-G

DR-Large P

DR-P

DR-Small P

DR-T

DR-W

DR-X

DR-Y

Designer Premium Panel Solid Drawer Fronts

DR-D

97

Routed Drawer Fronts

Minimum Size

Profile Page

DB-1

5 1/2” x 4”

156

Minimum 1 sq. ft. on drawer fronts.

DB-2

5 1/2” x 4 3/4”

156

*= No warranty on painting any Solid Wood Drawer Fronts.

DB-3

3 3/4” x 3 3/4”

156

DC-4

8 1/4” x 4 5/8”

157

MDF 3/4” Thick

10.00

DC-5

8 1/4” x 4 5/8”

157

PG Poplar

10.00

DC-6

8 1/4” x 4 5/8”

157

PG Alder

11.25

DC-7

8 1/4” x 4 5/8”

157

PG Maple

13.00

DV-1

5 5/8” x 4 1/2”

156

Alder - Select

13.00

DV-2

6 1/8” x 4 1/2”

156

Alder - Rustic

14.50

DV-3

5 5/8” x 4 1/2”

156

Beech - Select

13.00

Cherry - Select

21.50

Cherry - Rustic

24.00

Hickory - Select (Calico)

18.50

Hickory - Rustic (Calico)

20.50

Mahogany, African (Flat Sawn)

24.75

Mahogany, African (Ribbon)

24.75

Maple - Natural

13.00

Maple - Select

17.75

Maple - Rustic

20.25

Pine - Knotty

17.75

Red Oak - Select

13.00

Sapele - (Flat Sawn)

25.00

Sapele - (Ribbon)

25.00

Walnut - Select

26.25

Walnut - Rustic

26.75

White Oak - Select

22.50

White Oak - Rustic

20.50

White Oak - Rift (Straight Grain)

26.25

White Oak - Quarter Sawn

25.00

Outside Edge Profile Options

Profile Page

Standard Outside Edges

120-124

Rosewood Outside Edges (additional charges will apply see below)

125

Route Charges Standard Route: use solid drawer front sq. ft. price + $10.00 per piece Standard Route with R-2, R-3, R-6, R-7, R-8 or R-9 Outside Edge: use solid drawer front sq. ft. price + $20.00 per piece Standard Route with R-4 or R-5 Outside Edge: use solid drawer front sq. ft. price + $25.00 per piece

98

Use Solid DF Sq. Ft. Price + Route charge Per Piece

Drawer Front Style

Materials

We recommend and warranty MDF Solid Drawer Fronts.

DB-2

DB-3

DC-4

DC-5

DC-6

DC-7

DV-1

DV-2

DV-3

Routed Drawer Fronts

DB-1

99

Solid Drawer Fronts with Rosewood Outside Edge 100

Drawer Front Style

Minimum Size

Route Charge Per Piece

Profile Page

Materials

R-2

5 1/2” x 3 1/2”

10.00

158

Minimum 1 sq. ft. on drawer fronts.

R-3

5 1/2” x 3 1/2”

10.00

158

*= No warranty on painting any Solid Wood Drawer Fronts.

Use Solid DF Sq. Ft. Price + Route charge Per Piece

We recommend and warranty MDF Solid Drawer Fronts.

R-4

5 1/2” x 3 1/2”

14.00

158

R-5

5 1/2” x 3 1/2”

14.00

158

R-6

5 1/2” x 3 1/2”

10.00

158

R-7

5 1/2” x 3 1/2”

10.00

158

R-8

5 1/2” x 3 1/2”

10.00

158

R-9

5 1/2” x 3 1/2”

10.00

158

MDF 3/4" Thick

10.00

PG Poplar

10.00

PG Alder

11.25

PG Maple

13.00

Alder - Select

13.00

Alder - Rustic

14.50

Beech - Select

13.00

Cherry - Select

21.50

Cherry - Rustic

24.00

Hickory - Select (Calico)

18.50

Hickory - Rustic (Calico)

20.50

Mahogany, African (Flat Sawn)

24.75

Mahogany, African (Ribbon)

24.75

Maple - Natural

13.00

Maple - Select

17.75

Maple - Rustic

20.25

Pine - Knotty

17.75

Red Oak - Select

13.00

Sapele - (Flat Sawn)

25.00

Sapele - (Ribbon)

25.00

Walnut - Select

26.25

Walnut - Rustic

26.75

White Oak - Select

22.50

White Oak - Rustic

20.50

White Oak - Rift (Straight Grain)

26.25

White Oak - Quarter Sawn

25.00

R-3 (no lip) & R-2 (fingerpull) Standard Rosewood Bead

Solid Drawer Fronts with Rosewood Outside Edge

R-4 (no lip) & R-5 (fingerpull) Matches the MP-27 Solid & MP-27 Inset

R-6 (no lip) & R-7 (fingerpull)

Matches the Delaware & Rochester (Solid) and New Hampshire & Newport (Inset)

R-8 (no lip) & R-9 (fingerpull) Matches the Finland Solid & Finland Inset

101

3-Piece Solid Drawer Fronts 102

Drawer Front Style

Minimum Height

Option Charge Per Piece

Profile Page

Materials

TP-1

3 1/2”

25.00

159

Minimum 1 sq. ft. on drawer fronts.

TP-2

3 1/2”

25.00

159

TP-3

3 1/2”

25.00

159

TP-4

3 1/2”

25.00

159

TP-5

3 1/2”

25.00

159

*Minimum width will vary depending on stile width.

Outside Edge Profile Options

Profile Page

Standard Outside Edges

120-124

Use Solid DF Sq. Ft. Price + Route charge Per Piece

*= No warranty on painting any Solid Wood Drawer Fronts. We recommend and warranty MDF Solid Drawer Fronts.

MDF 3/4” Thick

10.00

PG Poplar

10.00

PG Alder

11.25

PG Maple

13.00

Alder - Select

13.00

Alder - Rustic

14.50

Beech - Select

13.00

Cherry - Select

21.50

Cherry - Rustic

24.00

Hickory - Select (Calico)

18.50

Hickory - Rustic (Calico)

20.50

Mahogany, African (Flat Sawn)

24.75

Mahogany, African (Ribbon)

24.75

Maple - Natural

13.00

Maple - Select

17.75

Maple - Rustic

20.25

Pine - Knotty

17.75

Red Oak - Select

13.00

Sapele - (Flat Sawn)

25.00

Sapele - (Ribbon)

25.00

Walnut - Select

26.25

Walnut - Rustic

26.75

White Oak - Select

22.50

White Oak - Rustic

20.50

White Oak - Rift (Straight Grain)

26.25

White Oak - Quarter Sawn

25.00

3-Piece Solid Drawer Fronts

TP-5

TP-4

TP-1

TP-2

TP-3

103

Solid Drawer Fronts with Applied Molding TITLE

Applied Moldings are available both on Doors and Drawers. Drawer Front Style

Minimum Size

Profile Page

AM-1

5” x 3 1/2”

160

AM-2

5” x 3 1/2”

160

AM-3

5” x 3 1/2”

160

AM-4

5” x 3 1/2”

160

AM-5

5” x 3 1/2”

161

AM-6

5” x 3 1/2”

161

AM-8

5” x 4”

160

AM-9

5” x 4 1/4”

160

AM-13

5” x 3 1/2”

AM-14

Use Solid DF Sq. Ft. Price + Route charge Per Piece

Minimum 1 sq. ft. on drawer fronts. *= No warranty on painting any Solid Wood Drawer Fronts. We recommend and warranty MDF Solid Drawer Fronts.

MDF 3/4” Thick

10.00

PG Poplar

10.00

PG Alder

11.25

161

PG Maple

13.00

5” x 3 1/2”

161

Alder - Select

13.00

AM-15

5” x 3 1/2”

161

Alder - Rustic

14.50

AM-16

5” x 3 1/2”

161

Beech - Select

13.00

AM-17

5” x 3 1/2”

161

Cherry - Select

21.50

AM-18

5” x 3 1/2”

160

Cherry - Rustic

24.00

AM-19

5” x 3 1/2”

160

Hickory - Select (Calico)

18.50

Hickory - Rustic (Calico)

20.50

Mahogany, African (Flat Sawn)

24.75

Mahogany, African (Ribbon)

24.75

Maple - Natural

13.00

Maple - Select

17.75

Maple - Rustic

20.25

Pine - Knotty

17.75

Red Oak - Select

13.00

Under 2.25 sq.ft. add $25.00 per piece. Over 2.25 sq.ft add $50.00 per piece.

3 weeks lead time

Over 50” add $75.00 per piece. These Moldings are designed to go around perimeter. No discounts apply for Doors and Drawer Fronts with the Applied Moldings listed below. Drawer Front Style

Minimum Size

Profile Page

Sapele - (Flat Sawn)

25.00

AM-20

5” x 3 1/2”

161

Sapele - (Ribbon)

25.00

AM-21

5” x 3 1/2”

161

AM-22

5” x 3 1/2”

161

Walnut - Select

26.25

Walnut - Rustic

26.75

White Oak - Select

22.50

White Oak - Rustic

20.50

White Oak - Rift (Straight Grain)

26.25

White Oak - Quarter Sawn

25.00

Under 2.25 sq.ft. add $50.00 per piece. Over 2.25 sq.ft add $100.00 per piece. Over 50” add $150.00 per piece.

104 104

Materials

3 weeks lead time

Solid DF with AM-2 Molding

Solid DF with AM-3 Molding

Solid DF with AM-4 Molding

Solid DF with AM-5 Molding

Solid DF with AM-6 Molding

Solid DF with AM-8 Molding

Solid DF with AM-9 Molding

Solid Drawer Fronts with Applied Molding

Solid DF with AM-1 Molding

105

Solid Drawer Fronts with Applied Molding 106

Solid DF with AM-13 Molding

Solid DF with AM-14 Molding

Solid DF with AM-15 Molding

Solid DF with AM-16 Molding

Solid DF with AM-17 Molding

Solid DF with AM-18 Molding

Solid DF with AM-19 Molding

Solid DF with AM-20 Molding

Solid DF with AM-21 Molding

Solid DF with AM-22 Molding

Angle, Hood & Trapezoid available for Cope 'N Stick & Mitered Doors

Wood Door Options, Specials & Specifications

Angle, Hood, Valance & All Specialty Panels: Customer is responsible for providing all measurements and details necessary. CAD or detailed drawing required. Once this information is received we will generate a price quote. Once price quote is approved we will produce a detailed CAD drawing with all specifications. CAD must be signed and approved before manufacturing will begin. Once CAD drawing is approved allow approximately three weeks for manufacturing. $150.00 CAD fee will be charged if order is not placed. Angel, Hood & Trapezoid available for Cope 'N Stick & Mitered

Angle Door Set

Angle Door

Trapezoid Door

Hood Panel

Hood Panel

107

Wood Door Options, Specials & Specifications

Angle, Hood, Valance & All Specialty Panels: Available in both Cope 'N Stick & Mitered. Customer is responsible for providing all measurements and details necessary. CAD or detailed drawing required. Once this information is received we will generate a price quote. Once price quote is approved we will produce a detailed CAD drawing with all specifications. CAD must be signed and approved before manufacturing will begin. Once CAD drawing is approved allow approximately three weeks for manufacturing. $150.00 CAD fee will be charged if order is not placed.

Valances available for Cope 'N Stick & Mitered Doors

Height Rise

108

Width

Appliance Panels available for Cope 'N Stick & Mitered Doors

Panel

Solid

Panel

Panel

Panel

Solid

Panel

Panel

Panel

Wood Door Options, Specials & Specifications

Angle, Hood, Valance & All Specialty Panels: Available in both Cope 'N Stick & Mitered. Customer is responsible for providing all measurements and details necessary. CAD or detailed drawing required. Once this information is received we will generate a price quote. Once price quote is approved we will produce a detailed CAD drawing with all specifications. CAD must be signed and approved before manufacturing will begin. Once CAD drawing is approved allow approximately three weeks for manufacturing. $150.00 CAD fee will be charged if order is not placed.

Panel

Panel Panel

Panel

Solid

Panel

Panel

Panel

Panel

Panel

Panel

Panel

109

Wood Door Options, Specials & Specifications

Appliance Wing Cut: Add $15.00 per door. Use where the appliance can accommodate the full thickness of the panel on all four sides. Each piece is routed on all four sides of the door. Available with no lip or D3 (square) outside edge profiles only. Appliance Wing Cut Kit: Add $25.00 per door. Use where the appliance requires extra room behind the handle or at the bottom of the dishwasher door. Each piece is routed on three sides of the door. One edge is prepared to receive a 1/4” extension. Available with no lip or D3 (square) outside edge only. Must specify right or left when ordering an arch door style. Refrigerator Standard Application: Subtract 2” from width of panel. Wing Cut Kit includes a 2 1/2” x 1/4” plywood extension. Dishwasher Standard Application: Subtract 1” from height of panel. Wing Cut Kit includes a 1 1/2” x 1/4” plywood extension

1/8” 3/32"

1/4"

Appliance Wing Cut

7/16"

1/4"

Appliance Wing Cut Kit

Plywood

7/16"

Applied Molding Options: Accent Materials: Add 10% to sq. ft. price if the applied molding is a different material than the door. Applied moldings come standard as drawn in our profile book. Juliano/Merlot (solid) & Kathryn/Chablis (inset) Arch with Applied Molding: Juliano & Merlot with Applied Molding: use Solid Square Applied Molding sq. ft. price + $250.00 per door. Kathryn & Chablis with Applied Molding: use Inset Square Applied Molding sq. ft. price + $250.00 per door. Available with all Applied Moldings: refer to pages 152-153 for profiles. Available with all Standard Outside Edges: refer to pages 120-124 for profiles. Available with Rosewood Outside Edges: refer to page 125 for profiles. Juliano & Merlot are available with all Large Solid Panels or F Panel: refer to pages 148-151 for profiles. Kathryn & Chablis are available with plywood or VP Panel: refer to page 148 for profiles. Custom arched applied molding doors are available. Fax or E-mail detailed drawings for price quote. Special Dry Fit: All of our moldings are cut precise, fitted and glued in. We do not use any pins or fasteners. Some of our molding styles by design are glued directly on to the panel. This can be problematic for some climates. If your shop or the job site is in an area where this is a concern, we have an option. Order your doors with the molding dry fit . We will not glue the molding in, which will allow you time to finish your doors and stabilize to your climate. Once this is completed you can either pin or glue molding in.

110

Panel

Panel

Panel

Center Rail

Center Rail

Center Rail

Panel

Panel

Panel

Cope N’ Stick Square

Mitered Square

Cope N’ Stick Arch

Center Stiles: Cal Door strongly recommends a center stile on any door over 24” wide. Any door 24” and over in width must specify with or without a center stile. Any door 24” and over in width without a center stile is not guaranteed against warping or twisting. Add 25% to sq. ft. price for center stile. Multiple center stiles refer to wainscot pricing on pages 118-119.

Panel

Center Stile

Mitered Square

Panel

Panel

Center Stile

Panel

Panel

Center Stile

Panel

Cope N’ Stick Square

Wood Door Options, Specials & Specifications

Center Rails: Cal Door strongly recommends a center rail on any door over 50” high. This is standard and no up charge will apply. Any door 50” and over in height must specify with or without a center rail. Any door over 50” without a center rail is not guaranteed against warping or twisting. Any door under 50” with a center rail add 50% to sq. ft. price. Any special placement center rail add 50% to sq. ft. price. Multiple center rails refer to wainscot pricing on pages 118-119.

Cope N’ Stick Arch

Customer Supplied Material: This is for materials not shown in our current price book. Finished door thickness may vary depending on the thickness of material received. Our standard finished door thickness is 13/16” thick. Order must be sent to the office for a price quote and amount of material needed to complete job. Do not ship material prior to receiving amount needed to complete job. Delivery dates will be assigned upon receipt of material. Material pick up on our truck: For material amounts up to 250 feet - $150.00 pick up fee will apply. For material amounts over 250 feet - $250.00 pick up fee will apply. For Solid Application: Take the total square footage of the job, multiplied by 2.5 which will give you the amount of material needed. Example: 100 sq. ft. job x 2.5 = 250 board ft of material needed. For Inset Plywood Application: Take the total square footage of the job, divided by 32 which will give you the number of sheets needed. Add 20% to that total for waste, this will give you the final amount of sheets needed. Lumber for the frames, take the exact square footage and that will be the amount needed. Example: 100 sq. ft. inset job will require 100 board ft. of lumber.

111

Wood Door Options, Specials & Specifications

Drawer Front Options: Solid Drawer Fronts: minimum 1 sq. ft. 52 standard outside edge profiles. Designer, Solid with Rosewood, Solid with Applied Molding, Routed, 3 & 5-Piece Drawer Fronts: minimum 1 sq. ft. Designer Standard Panel Solid Drawer Fronts: use designer drawer front sq. ft. price, refer to page #94. Designer Premium Panel Solid Drawer Fronts: use designer drawer front sq. ft. price, refer to page #96. Designer drawer fronts are available in 13/16" and 1". Solid Drawer Fronts with R-2, R-3, R-6, R-7, R-8 & R-9 Outside Edge: use solid drawer front sq. ft. price + $10.00 per piece. Solid Drawer Fronts with R-4 or R-5 Outside Edge: use solid drawer front sq. ft. price + $14.00 per piece. Routed Drawer Fronts: use solid drawer front sq. ft. price + $10.00 per piece. Solid Drawer Fronts with Applied Molding: use solid drawer front sq. ft. price + molding charge per piece. Molding charge ranges from $20.00 to $25.00 per drawer front, refer to page #104 for pricing. 3-Piece Drawer Fronts: use solid drawer front sq. ft. price + $25.00 per piece. Must specify stile widths. 5-Piece Solid Panel: use matching solid panel door sq. ft. price + $10.00 per piece. 5-Piece Inset Panel: use matching inset panel door sq. ft. price + $8.00 per piece. Edge Detail Change: 52 standard outside edge profiles. D-3 (square) on one stile: no additional charge. Combining two outside edge profiles on one door: add 10% to sq. ft. price. Example: B-2 (fingerpull) on the top & bottom B-3 (no lip) on both sides. Rosewood Outside Edge to Cope 'N Stick Doors & 5-Piece Drawer Fronts (ran on CNC): R-2, R-3, R-6, R-7, R-8 & R-9: add $5.00 to sq. ft. price R-4 or R-5: add $7.00 to sq. ft. price Rosewood Outside Edge to Mitered Doors & 5-Piece Drawer Fronts (ran on molder): R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9: add $3.00 to sq. ft. price F-Panel: (Solid Wood & MDF) Use Solid Panel pricing for “F” panel application. Available in all stocked wood species and MDF. F-Panel recommended when ordering any groove patterns to avoid seeing a MDF core. F-Panel recommended for materials in which plywood and solid lumber have wide color variations; such as African Mahogany & Sapele. Recommended for a closer match when using a clear or light stain, due to the natural variation between plywood and solid lumber. Recommended for all rustic materials. Plywood only stocked in Rustic Alder. We currently stock solid lumber in Alder-Rustic, Hickory-Rustic, Maple-Rustic, Walnut-Rustic, White Oak-Rustic. For all other rustic species please refer to “Customer Supplied Material” found on page #111. 3/8" Thick "VP" Panel: (Veneer) Use solid panel sq. ft. pricing. Recommended in place of "F" Panel (solid) for dry and humid environments. Stocked in Paint Grade Maple, Alder-Select, Alder-Rustic, Cherry-Select, Maple-Select, Walnut-Select, White Oak-Select and White Oak-Rift (Straight Grain). Non-stock materials are available. Additional lead time may be required (call for pricing). Fingerpull Notch: Add $4.00 per notch. Notch starting and stopping 2 5/8" from each side of rail. No special placement available.

2 5/8" from edge 3/8"

112

2 5/8"

2 5/8"

Cope ‘N Stick French Lites: Minimum lite opening 2 1/2” x 2 1/2”. Use Cope ‘N Stick Inset sq. ft. pricing plus mullion charges below. Standard placement of lites: $10.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $12.00 per lite Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual lites (this accommodates multiple pieces of glass): add an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Mitered French Lites: Minimum lite opening 2 1/2” x 2 1/2”. Use Mitered Inset sq. ft. pricing plus mullion charges below. Standard placement of lites: $12.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $14.00 per lite Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual lites (this accommodates multiple pieces of glass): add an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Applied Molding French Lites (available in Cope ‘N Stick & Mitered): Minimum lite opening 2 1/2” x 2 1/2”. Use Cope ‘N Stick or Mitered Applied Molding Inset pricing plus mullion charges below. Standard placement of lites: $14.00 per lite. Special placement of lites (more than one vertical mullion or any unequal openings): $16.00 per lite. Standard route accommodates one piece of glass and comes standard with rubber stop groove. Individual lites (this accommodates multiple pieces of glass): add an additional $10.00 per lite. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request (when ordering wood stops must specify no rubber stop groove): $5.00 per door. Standard Specialty French Lites (refer to pages 90-93 for profiles and pricing): Use matching inset door style sq. ft. price + per door charge. Available in both Cope ‘N Stick & Mitered. Available in all door styles and thicknesses, with or without Applied Moldings. All option charges apply to sq. ft. cost (Example: larger stiles & rails and thicker doors are subject to an up charge). Pricing is based on doors that are up to 48” in height. Doors over 48” must be quoted. The door height must be more than double the width of all arched mullion designs. We will provide a CAD drawing for your approval prior to construction. Lead time is between 2 to 4 weeks once CAD drawings have been approved. Not available with individual lites. Standard route accommodates one piece of glass.

Wood Door Options, Specials & Specifications

French Lites:

Custom Specialty French Lites: General Guidelines: Please keep in mind the possibility of size restraints based on chosen style. Depending on design, cost can range from $250.00 to over $700.00 per door and up. Customer is responsible for providing all measurements and details necessary. CAD or Digital CAD drawings preferred. Once this information is received we will generate a price quote. Once price quote is approved we will produce a detailed CAD drawing with all specifications. CAD must be signed and approved before manufacturing will begin, which is approximately four weeks. $150.00 CAD fee will be charged if you do not go through with the order. Standard route accommodates one piece of glass.

Rubber Stop Application Rubber stop groove designed to receive Hafele clear panel retainer as shown.

Wood Stop Application A - Mullion added to create individual Lights B - 1/4" x 3/8" Wood Stop

1/8" Glass Standard Setup

Glass A

*sample showing #2 Cope 'N Stick

B *sample showing #2 Mullion

113

Wood Door Options, Specials & SpecificationsStandard

Glass Frames: Our glass doors come standard with a rubber stop groove to accommodate the Hafele vinyl glass retainer. Hafele clear vinyl glass retainer available upon request: $4.00 per door. Wood stops available upon request: $5.00 per door. When ordering wood stops must specify no rubber stop groove. Glass Frame Order Options: Standard Glass Door Route No Rubber Stop Groove No Glass Route/Panel Groove OK No Glass Route/No Panel Groove. Available on Mitered frames ONLY.

Cal Door always recommends to wait for frames to arrive BEFORE ordering glass. The dimensions here are APPROXIMATELY ONLY.

7/16" x 7/16" Approximately

7/16" x 7/16" Approximately

Standard glass door route. Comes standard with rubber stop groove. Must specify iy you would like to purchase rubber stop.

No rubber stop groove. Must specify if you would like to purchase wood stop.

No glass route - comes with standard panel groove.

No glass route & no panel groove. Available on mitered Frames ONLY. Not available on Cope 'N Stick door styles.

Rubber Stop Application Rubber stop groove designed to receive Hafele clear panel retainer as shown.

Wood Stop Application A - Mullion added to create individual Lights B - 1/4" x 3/8" Wood Stop

1/8"Glass Standard Setup

Glass A

*sample showing #2 Cope 'N Stick

114

B *sample showing #2 Mullion

Cope ‘N Stick Lazy Susan Application: When ordering Lazy Susan you must specify LS on order form. We will add 1” in width and a D-3 OSE to one stile. This will allow you to miter or butt joint doors for assembly. Add $10.00 per door. Mitered Lazy Susan Application: Option #1: order 2 doors with one D-3 (square) stile on each door. Option #2: order one door oversized this will allow you enough room to cut in half and miter for reassembly. Must specify no pins: add $25.00 per door. Prebore Applications: Standard Prebore Placement: add $3.00 per bore. Must specify Cup only or Cup & Dowel. Must specify DBE (distance from back edge) 3mm or 6mm only. Standard placement includes 2 holes, 3” on center from top and bottom. Any door over 50” will receive 3 holes unless specified otherwise. Must specify right or left stile for arch doors. Special Prebore Placement: add $4.00 per bore You must specify the distance from the top and bottom of door. We will not prebore different measurements top and bottom, they must be identical distances. Must specify right or left stile for arch doors.

Wood Door Options, Specials & Specifications

Lazy Susan:

3" on center

Standard

Cup Only

Back of Door

3mm or 6mm DBE

Cup and 8mm Dowel

35mm cup diameter 12mm deep bore DBE: Distance from Back -Edge

115

Wood Door Options, Specials & Specifications

Rope Moldings: Rope moldings are available in all materials. Additional lead time may be necessary for some rope molding materials. Rosewood Edge: Cope 'N Stick Doors & 5-Piece Drawer Fronts (ran on CNC): R-2, R-3, R-6, R-7, R-8 & R-9 R-4 or R-5 Mitered Doors & 5-Piece Drawer Fronts (ran on molder): R-2, R-3, R-4, R-5, R-6, R-7, R-8 & R-9 Solid Drawer Fronts with Rosewood Edge (ran on CNC): R-2, R-3, R-6, R-7, R-8 & R-9 R-4 or R-5

Sizing Information:

We add 1/8” on the width and height to all sizes. This allows us to oversize 1/16” all the way around which is removed during the manufacturing process to achieve a cleaner edge cut. Doors are manufactured to the nearest 1/16 of an inch. Standard Sizing: Doors are manufactured to the nearest 1/16”. Exact Sizing: If tighter tolerances are required, order Exact Size and we will manufacture to the nearest 1/32 of an inch: add 10% to sq. ft. price. No Shape: Doors can be ordered No Shape where we leave the doors 1/8” oversized width and height. This will allow for minor trimming and fitting. Flush Inset Application: It is virtually impossible to keep wide and/or tall doors flat even with the use of European hinges. We recommend using a Brass Ball Catch from Rockler Woodworking & Hardware. By using this product, 99% of your closing and/or warp issues will be eliminated. Part #28613:11/16” long x 5/16” wide Part #28662: 29/32” long x 11/32” wide Split Arches: Atlanta, Bordeaux, Chablis, Chateau, Juliano, Kathryn, Liberty and Merlot styles: add 50% to sq. ft. price. Custom split arches available, fax or email detailed drawings for quote.

116

Liberty (Solid) & Atlanta (Inset) Chateau (Solid) & Bordeaux (Inset)

Juliano (Solid) & Kathryn (Inset) Merlot (Solid) & Chablis (Inset)

We outsource our Cope 'N Stick, Panel and Outside Edge tooling. Outsourced tooling generally takes two weeks to receive once CAD drawings are approved. The majority of Mitered and Applied Molding Profiles are made in house and take approximately one week for manufacturing once CAD drawings are approved. Once tooling is received it takes two to three weeks for manufacturing We keep all tooling and add to our tooling library file. Cope ‘N Stick Tooling: $600.00 to $850.00 Raised Panel Tooling: $500.00 to $600.00 Outside Profile Tooling: $500.00 to $600.00 Mitered Profile Tooling: $400.00 to $500.00 Applied Molding Tooling: $400.00 to $500.00 Set-Up Fee: $150.00 Customer will be charged a Set-Up Fee of $150.00 each time they place an order with custom tooling. All add-on orders will be charged a $150.00 Set-Up Fee, regardless of order size. V-Grooves, Beaded V-Grooves & Square Grooves: Maximum panel size 42” wide by 60” tall. Doors over 60” tall will require a center rail. Plywood will show MDF core after grooving. Recommended with “F” panel application, for best results. Camden (refer to page #16 for pricing) : All other door styles with grooves: F Panel Application: use solid door sq. ft. price + groove placement charge below per sq. ft. Plywood Application: use inset door sq. ft. price + groove placement charge below per sq. ft. Groove placement options: 1 1/2” On or Off center: add $5.00 to sq. ft. price. 2” apart On or Off center: add $4.00 to sq. ft. price. 3” apart On or Off center: add $3.00 to sq. ft. price. Special Placement: provide drawing details for pricing.

Wood Door Options, Specials & Specifications

Tooling - Custom:

1/8" V-Groove

1/4" V-Groove

1/4" Beaded-Groove

3/8" Beaded-Groove

1/8" Square-Groove

117

Wood Door Options, Specials & Specifications

Wainscot Panels: Cope 'N Stick

Recommended to order with D-3 (square) Outside Edge. Cope 'N Stick wainscot panels can be ordered with different size stiles and rails. Standard frame size options are 1 3/4", 2", 2 1/4", 2 1/2" & 3". CAD or detailed drawing required. Wainscot Panels less than 4 sq.ft. or under 12" wide will be quoted as a flat fee.

2 to 3 Panels with standard size stiles & rails (up tp 96” wide or tall): use matching door sq.ft. price + 25% per sq.ft. 2 to 3 Panels with custom size stiles & rails (up to 96” wide or tall): use matching door sq. ft. price + 50% per sq. ft.

4 Panels with stanard size stiles & rails(up to 96” wide or tall): use matching door sq.ft. price +50% per sq.ft. 4 Panels with custom size stiles & rails (up to 96” wide or tall): use matching door sq. ft. price + 75% per sq. ft.

4+ Panels with standard size stiles & rails (up tp 96” wide or tall): use matching door sq.ft. price + 75% per sq.ft. 4+ Panels with custom size stiles & rails (up to 96” wide or tall): use matching door sq. ft. price + 100% per sq. ft.

118

Panels under 12" wide, under 12" or over 96" wide or tall: fax or email drawing for price quote.

Recommended to order with D-3 (square) Outside Edge. Mitered frames must be ordered with the same size stiles and rails. Standard frame size options are 1 3/4”, 2”, 2 1/4”, 2 1/2” & 3”. Not all mitered door styles are available in all frame sizes, refer to profile pages for availability. CAD or detailed drawing required. Wainscot Panels less than 4 sq.ft. will be quoted as a flat fee.

3 Panels (up tp 96” wide or tall): use matching door sq.ft. price +50% per sq.ft.

Wood Door Options, Specials & Specifications

Wainscot Panels: Mitered

4 Panels (up tp 96” wide or tall): use matching door sq.ft. price +75% per sq.ft.

4+ Panels (up tp 96” wide or tall): use matching door sq.ft. price +100% per sq.ft. Panels under 12" wide, under 12" or over 96" wide or tall: fax or email drawing for price quote.

119

Standard Outside Edge Profiles

D-3 No Lip

D-2 Finger Pull

Square

1/16" Radius Eased edge

A-5 No Lip

A-6 No Lip

1/16" Radius Eased edge

1/8" Radius

A-7 No Lip

1/4" Radius

1/4" Radius

A-3 No Lip

A-2 Finger Pull

3/8" Radius

3/8" Radius

A-8 No Lip

S-3 No Lip

1/2" Radius

S-2 Finger Pull

120

A-11 Finger Pull

Standard Outside Edge Profiles

121

122

Standard Outside Edge Profiles

T-2 Finger Pull

Minimum 2 1/2" stile & rail required

Minimum 2 1/2" stile & rail required

L-3 No Lip

L-2 Finger Pull

L-4 No Lip

L-5 No Lip

Standard Outside Edge Profiles

T-3 No Lip

Back Bevel: No additional profiles available.

B-6 Back Bevel

J-30 Back Bevel

15 degree bevel

30 degree bevel

J-10 Back Bevel

J-20 Back Bevel

10 degree bevel

20 degree bevel

123

Standard Outside Edge Profiles

3/8” Lip:

No additional profiles available. Prebore not available D-1 3/8" Lip

A-1 3/8" Lip

1/4" Radius

B-1 3/8" Lip

K-1 3/8" Lip

To match #10 inside edge profile

G-1 3/8" Lip

45 degree bevel To match #4 inside edge profile

124

Rosewood Outside Edge Profiles

125

Standard Cope ‘N Stick Inside Edge Profiles

MUL-1

5/16" #1

7/16"

MUL-23

#23 1"

1" Standard for Shaker (Inset) Standard for Durango & Madrid (Solid) Standard for all Applied Molding door styles (Solid & Inset)

Used with Standard & Premium Panel Profiles (F, M & VP Panel not available - use #1 Inside Edge) Standard for Teton (Solid & Inset) Standard for Del Oro (Solid & Del Rio (Inset)

7 16" MUL-16

3/16" #16

#20

7/16"

MUL-20

1"

1"

Optional for Shaker (Inset) Optional for Durango (Solid) (#16 only available with Plywood, F & VP Panels)

1 16"

1 16"

#9

12°

7/16"

12°

5/16"

MUL-9

MUL-30

#30 1"

1"

1 8"

#19

20°

7/16"

1 16" 20°

5/16"

MUL-19

MUL-26

#26 1"

1"

3" 8 #4

7/16"

5 16" 45° MUL-4

5/16"

45°

MUL-24

#24 1"

1" Standard for Century (Solid) Standard for Artesia (Inset)

126

Optional for Century (Solid) Optional for Artesia (Inset) (#24 only available with Plywood, F & VP Panels)

#5

7/16"

MUL-5 1 4"

#21

7/16"

3 16"

1"

MUL-21 1"

Standard for Denmark (Inset)

3" 8 #2

7/16"

7 16" MUL-2

#22

7/16"

MUL-22

1"

1"

Standard for Revere (Solid) Standard for Sierra (Inset)

1 4"