IKAS evolution
Configuration options
3D GeoSense Hydrostatic level measurement
MiniLite with extra counter and NANO L 3D IKAS evolution 3D GeoSense, pipe routing data
ORION 3 SD L 3D with PHOBOS 3D
Special software tools are used to support the processing of the data captured by the camera.
3D GeoSense flushing:
3D GeoSense without flushing:
IKAS evolution is capable of capturing the 3D sensor's measurement data (xyz coordinates) in a fully automated process. This is done simultaneously with the TV inspection.
Large-scale system: Cameras1): ORION 3 SD (L) 3D, ORION 3 (L) 3D, NANO (L) 3D POLARIS 3D Satellite-based inspection system: LISY 3 or LISY HD with control camera LISYCam 3, LISYCam 200, 3D funnel Flushing nozzle: PHOBOS 3D Operating system: BS7, BS5, BS 3.5 Cable winch: KW 305 / KW 505 with camera cable Synchronous winch: LISY synchronous winch (with camera cable instead of push rod) Camera cable PHOBOS 3D, 180m Software: IKAS evolution Optional: Measurement module system for hydrostatic level measurement
Large-scale system: ORION 3 SD (L) 3D, ORION 3 (L) 3D, NANO (L) 3D POLARIS 3D, ORPHEUS 2 3D2), ORPHEUS 3 3D2) ORPHEUS 2 HD 3D2), ARGUS 62) Satellite-based inspection system: LISY 3 or LISY HD with control camera LISYCam 3, LISYCam 200, 3D funnel Camera guide unit DEIMOS 3D Operating system: BS7, BS5, BS 3.5 KW 305 / KW 505 with camera cable Synchronous winch: LISY synchronous winch with camera cable plus Perfect Push Rod Software: IKAS evolution
IKAS evolution also allows displaying the measured course of the piping in real time while conducting a TV survey in a network diagram*. It is possible to import maps (such as a house's floor plan) to the software and to scale it to the required size to display the course of the piping which is generated in the process directly on the map. The pipe run is stored with three-dimensional coordinates and precise geographical information (georeferencing) to allow tracing the exact physical location of the course of the pipes from above the ground at any time. The site map created can easily be exported to every supported sewer inspection data format**. It is possible to subsequently adjust the data to precisely defined coordinates – fixed geographical reference points – using a wizard in the software*. IKAS evolution also supports capturing the height measurement data which the hydrostatic height measurement determines in a semi-automatic process. Just like when using 3D GeoSense for surveying the course of the pipes, this data is captured in one single work step with the TV inspection. The analysis and adjustment of the height reference points is done using a wizard* in IKAS evolution. * IKAS evolution MAP Route Assistant required for this function! ** Depends on the IKAS evolution channel interface that is used For further information on IKAS evolution, refer to the "IKAS evolution"
LISY HD with ORION 3
Compact system: MiniLite Cameras1): ORION 3 SD (L) 3D, ORION 3 (L) 3D, NANO (L) 3D POLARIS 3D Camera guide unit DEIMOS 3D Control console: BP2, BP100 Software: IKAS evolution
1) Cameras must be pre-calibrated once by IBAK before carrying out a pipe run survey. Without calibration, the specified cameras can be used as conventional cameras. 2) For pipe run surveying in the main pipe
Example for the configuration of 3D GeoSense with flushing: Large-scale system with BS7, KW 505, LISY synchronous winch, LISY 3 with ORION L 3D