For more information and care instructions www.beslagdesign.com
Installation instructions System Door handle Door handle
1.1
1.2
1.3
Center square spindle in the lock.
Fasten the mounting plates with the included screws and caps.
Remove the square spindle and use it to the guiding plates located in the center of the mounting brackets.
1.4
1.5
Recenter the square spindle. Ensure that the spindle is placed so that the jagged surface is facing the socket set screw in the handles. Press the handles firmly until they click into place on the top of the mounting plates.
Tighten all four socket set screws using the included hex keys. The smaller socket set screws should be installed in the rosettes, while the larges ones should be mounted in the handles themselves.
Toilet thumb turn
2.1
2.2
2.3
2.4
Fasten the mounting plates with the included screws and caps.
Center the square spindle in the lock.
Press the outer parts until they click into place on the top of the mounting plates.
Tighten the socket set screws using the included hex keys.
Mounting the toilet knob
3.1
3.2
Place the black plastic part in the lock and snap it into position.
Fasten the mounting plates with the included screws and caps.
3.3
Center the square spindle in the lock.
3.4
3.5
Press the outer parts until they click into place on the top of the mounting plates.
Tighten the socket set screws using the included hex keys.
Mounting key plate
4.1
4.2
4.3
Fasten the mounting plates with the included screws and caps.
Press the outer parts until they click into place on the top of the mounting plates.
Tighten the socket set screws using the included hex keys.