For more information and care instructions www.beslagdesign.com
Installation of Door Handle
1.1
1.2
1.3
To ensure the best fit, it is important that the spindle is centered in the door during installation.
Place one half of the handle on the spindle. Tighten the set screw so that the tip penetrates the spindle.
Cut the screws to the appropriate length so that they go at least 5 mm into the sleeves when mounted. Consider the thickness of the door and the rosettes.
1.4
1.5
1.6
Place the other part of the handle on the spindle. Ensure that the octagonal part of the sleeves fits correctly into the octagonal holes.
Use the included screws and sleeves to tighten the two handle parts together with an Allen key.
Tighten the set screw with an Allen key until the tip penetrates the spindle.