Issuu

WORKSTATION Workstation is a technologically advanced desk programme with high systemic smart features that can be shaped in various ways to meet individual customer needs. Simple to adapt to specific structural environment.

The desk‘s highly flexible table top frame offers a wide range of use options. Workstation desk offer a virtually limitless range of combinations and are responsive to organisational change.

INSPIRING OFFICES. SINCE 1790.

WORKSTATION PRODUCT DESCRIPTION

PRODUCT DESCRIPTION

WORKSTATION BASIC RECTANGULAR

WORKSTATION BASIC ROUND

WORKSTATION SQUARE BY BENE

2 © Bene GmbH, 08/2026

WORKSTATION PRODUCT DESCRIPTION

PRODUCT DESCRIPTION 1

Table top: Three board thickness are available: 13 mm compact top, 19 mm, or 25 mm chipboard

Edge (circumferential): Chipboard 19 mm or 25 mm with 2 mm mono-edge

Frame (self-supporting table frame): Basic rectangular, Basic round, SQUARE by Bene.

Maximum load: 100 kg

4 6

5 1 2

8 1 2 3 4 5 6 7 8 9 10 11

Table top Frame Slab-end Foldable cable tray T Handle and retainer for sliding top Universal adapter Plate connector Diecast- clamps Table top clip Plug box or cable box Cable support arm for foldable cable tray T

Information on additional options such as cable chain and cable collector  product data sheet „cable & media management“

3 © Bene GmbH, 08/2026

WORKSTATION OVERVIEW AND DIMENSIONS

OVERVIEW AND DIMENSIONS DESKTOP SHAPE TG BASIC DESK Rectangle RE

Rounded on user side NG 800 - 2.400

1.400 - 2.400

600 / 800 900 / 1.000

900 / 1.000

Combination desk K1

Desk combination K3, type 3

800

1.200 800

600

1.600 - 2.400 800

600

1.600 - 2.400 1.600 - 1.800

800

1.200

1.600 - 2.400 1.600 - 1.800

1.600 - 2.400

800

Equal-sided 120° angle desk W3

1.193

1.0

800

1.0

800

1.293

1.2

800

1.2

Dimensions in mm

4 © Bene GmbH, 08/2026

WORKSTATION OVERVIEW AND DIMENSIONS

OVERVIEW AND DIMENSIONS DESK TOP SHAPES COMMUNICATION SEGMENTS TC Lateral over 1 table rectangular MV

Lateral over 1 table rounded MU

400

400 900

1.000

400 800

900

400 600

400 1.000

400 800

600

400

Lateral over 2 tables rectangular ME

Lateral over 2 tables rounded MR

400

1.000

900

800

900

1.000

400 800

600

1.000 1.000

400

600

900

400

900

800

400

800

600

400

DESKTOP SHAPES DESK EXTENSION TA Further installation desk RE

Side desk RE

800 - 2.400

600

800

900

1.000

800 - 2.400

600

800

900

1.000

KEY Wooden structure direction

Column position Extension dimension

800 600

Slab-end position

1.2

800

1.2

Support leg position

Leg length

Dimensions in mm

5 © Bene GmbH, 08/2026

WORKSTATION LATERAL DEFINITION AND DIRECTION OF TOP SHAPE

LATERAL DEFINITION AND DIRECTION OF TOP SHAPE LATERAL DEFINITION AND DIRECTION OF TOP SHAPE RE, NG Visitor side (V) left side (L)

right side (R)

N User side (U)

K1, K3

Visitor side (V) L

Visitor side laterally (VS)

Visitor side (V) R

lateral (S)

User side (U)

Visitor side laterally (VS)

User side (U)

front (F)

Visitor's side left (VL) N

left side (L)

front (F)

Visitor's side right (VR) right side (R)

User side (U)

CONNECTION POSITION AND DIRECTION OF TOP SHAPE RE

MV, MU

L TA

TG L

ME, MR N

TA TG L

R TG

TA TA

N..... Neutral

L.....Left

R..... Right

6 © Bene GmbH, 08/2026

WORKSTATION FRAME VERSIONS

FRAME VERSIONS The heights shown all refer to the upper edge of the desk when 25 mm chipboard is being used. In the case of 19 mm chipboard and 13 mm compact top, the desk height is reduced accordingly.

850

740

650

200

850 650

200

850 650

200

BASIC RECTANGULAR · Rectangular pipe 60 x 30 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: fixed or in 20 mm grid with tool

BASIC ROUND · Round pipe Ø 60 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool

SQUARE BY BENE · Rectangular pipe 55 x 25 mm, steel · Levelling: +10 mm by means of adjustment leg · Range of height adjustment: in 20 mm grid with tool

7 © Bene GmbH, 08/2026

WORKSTATION OPTIONS TABLE TOP

OPTIONS TABLE TOP Cable outlet ø 80 mm

CABLE OUTLET Quick and easy to pass cabling through the table top. The outlet cover can be slip to one side so that the cable can pass though it. · 1-3 units per table top possible · Positions specified as fixed per desktop shape Possible positions of the grommet hole RE, NG

PLUG BOX The plug box is milled flush into the table top and can be equipped with a connection plug board. Quick and easy access to the plug board is enabled by opening the aluminium flap.

Plug box 315 x 125 mm

· 2 unit per table top possible · Position per desktop shape specified as fixed · Position in the centre up to desk width of 1.400 mm · Position left or right from desk width of 1.600 mm upwards Cannot be combined with sliding top and cable flap. Plug box and integral connection plug boards  “Cable and media management” price list Possible positions of the plug box RE, NG

CABLE BOX The cable box enables quick and easy access to the cable tray. The plastic frame and the metal flap are available in white, black or aluminum.

Cable Box 327 x 152 mm

· 1 to maximum 2 pieces per desk top are possible · position per desktop shape specified as fixed · position in the centre up to desk width of 1.400 mm · position left or right from desk width of 1.600 mm upwards Cannot be combined with sliding top and cable flap. Possible positions RE, NG

8 © Bene GmbH, 08/2026

WORKSTATION OPTIONS

OPTIONS BFRIENDS POWER MODULE The bFRIENDS Power Module is available in three sizes - S, M and L. It can be fitted to all tables wherever a cable outlet is possible. An existing cable outlet hole (diameter 80 mm) can also be replaced by a Power Module. Installation in combination with a sliding table top or cable flap is not possible. More information on the possible colours and colour configurations  Product data sheet „bFRIENDS“

bFRIENDS Power Module parts/structure

bFRIENDS Power Module types Type S with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W

Type M with power socket or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W

Type L with power socket and/or USB charging socket (A+C) charging port USB-A 18W / USB-C 22W (possible are: 2 x power socket | 2 x USB | 1 x power socket + 1 x USB)

USB-Charger (A+C) or power socket

Sleeve

Insert

Base

Fastener

Possible positions of the bFRIENDS Power Module Fixed positions. 1 or 2 cable outlet holes per panel possible: left / right / left and right Not possible in combination with sliding top and cable flap.

RE, NG

9 © Bene GmbH, 08/2026

WORKSTATION OPTIONS TABLE TOP

OPTIONS TABLE TOP SLIDING TOP The sliding top has a sliding mechanism with a latching function for locking. It can be easily slid to the front by loosening the catch and thus allowing cable management access. · Sliding information: 190 mm Only in combination with a cable tray. The sliding top cannot be used with a desk depth of 600 mm. Combination with cable flap is not possible.

Possible desk top shapes RE, NG

CABLE FLAP Cable flaps allow for easy, ergonomically correct and quick access to cable management.

Cable flap depth 180 mm

· Version possible as table top or variation. · The cable flap is divided in the centre from a desk width of 1.401 mm upwards. · Installation on universal adapters included. Only makes sense in connection with a cable tray. Combination with sliding top is not possible. If a shortened sliding top is selected, the depth of the cable flap is reduced by -31 mm.

Possible positions for the cable flap RE, NG

PREPARATION FOR CONNECTION TO T-PANEL (UNIVERSAL ADAPTER) The desk is automatically equipped with universal adapters in this process. This enables different elements to be connected.

Universal adapter

· 2 units up to a desk width of 1.400 mm · 3 units from a desk width of 1.401 mm upwards · T-Panel Pure: behind desk top with gap or behind shortened desk top · T-Panel Curve: behind desk top with gap or in top slot · T-Panel Multi: behind desk top with gap or in top slot T-Panel cannot be connected using table top clamp.

10 © Bene GmbH, 08/2026

WORKSTATION OPTIONS

OPTIONS FOLDABLE CABLE TRAY T The cable tray is aimed at providing virtually invisible cable management. Vertical cable routing can be done by means of cable chains which can be hooked in along the entire length of the cable tray. With brackets screwed into tabletop. Colours: SZ black, AL aluminium or WI white Cable chains  pricelist cable and media management. foldable cable tray T

Possible positions for the cable tray RE, NG

INSTALLATION OF CONNECTION PLUG BOARDS IN CABLE TRAYS Connection plug board brackets are required as follows, depending on the number and position of the connection plug boards: foldable cable tray T

2 units

4 units

3 units

The cable tray brackets supplied can simultaneously be used as connection plug board brackets.

11 © Bene GmbH, 08/2026

WORKSTATION OPTIONS

OPTIONS SUPPORTING PEDESTAL CONNECTION CT supporting pedestals can be attached to the Workstation desks by means of support mounts with heights of 548 mm (9 HE) and 598 mm (10 HE). In this process, the slab-end is left off on the pedestal side, although the length of the frame remains unchanged. The length of the cable tray also remains the same. A more obvious choice in connection with cable flap or sliding top. No top overlap is permitted on the pedestal side due to the danger of tipping. Modesty panels are only permitted on the rear edge and if the desk depth is greater than the pedestal depth.

Possible positions of the supporting pedestal connection RE, NG

FIXED PEDESTAL CONNECTION The CT fixed pedestal with a height of 740 mm can be loosened from desks with height-adjustable or fixed-range height adjustment areas. Possible table depths for this are 600, 800, 900 and 1.000 mm. With 900 and 1.000 mm, the top of an 800 mm deep pedestal can be extended backwards by means of an overlap of the top. The length of the frame remains unchanged.Back-fitting deconstruction to holder is only possible in certain circumstances. No excess overlap of the top is possible on the connection side. Not possible for rectangle RE with Soft Edge.

Possible positions of the fixed pedestal connection RE, NG

12 © Bene GmbH, 08/2026

WORKSTATION OPTIONS

OPTIONS SIDEBOARD CONNECTION The sideboard is used as a frame replacement and is possible with a maximum of 1 sideboard per desk. It is possible to form a connection with the sideboard from a desk width of 1.600 mm upwards. Insertion angle is always 90°. The minimum width of the sideboard depends on the depth of the desk and amounts to 1.200 mm or 1.600 mm. The range of height adjustment in this regard only begins from 680 mm onwards. For reasons of stability and space, the sideboard is only permitted with the desktop shapes shown at the bottom.

Possible positions of sideboard connection RE NG

COMMUNICATIONS SEGMENT Assembly lateral over 2 desks Material: Chipboard 19 / 25 mm or compact top 13 mm. In the communication segment shown, the desks are arranged flush with no gap. When an RV dividing wall or panels between both desks are used, the width of the communication segment is automatically adjusted correspondingly. lateral rounded over 2 desks

EXCESS LENGTH OF DESK TOP Depending on the shape of the table top, the table top can be enlarged in different directions by the specified dimensions. Not available in combination with equal-sided 120° angle desk W3 . RE NG visitor side

left

K1 visitor side

right

left

user side

K3 visitor side

right

visitor side lateral

visitor side

lateral

visitor side lateral

user side user side

visitor side: left: right: user side:

0 - max. 200 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm

visitor side: left: right: user side:

0 - max. 200 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm

visitor side: 0 - max. 200 mm visitor side lateral: 0 - max. 200 mm lateral: 0 - max. 200 mm

visitor side: visitor side lateral: lateral: user side:

0 - max. 200 mm 0 - max. 200 mm 0 - max. 200 mm 0 - max. 100 mm

WORKSTATION COLOURS AND MATERIALS

COLOURS AND MATERIALS MATERIALS AND SURFACES The following materials and colours are available for this product.

• •

SZ Black

Veneer

• •

AL aluminium

Frame

Melamine

Table top Table top, Melamine Table top, Compact

WI white

•. . . . . . . . . . available - . . . . . . . . . . not available

Basic rectangular

Steel pipe

•

Basic round

Steel pipe

•

SQUARE by Bene

Steel pipe

•

WORKSTATION COLOURS AND MATERIALS

AL aluminium, plastic

SZ black, plastic

AL anodised aluminium

SZ black, powder-coated

WI white, powder-coated

AL aluminium, powder-coated

Options Cable outlet Plug box Cable Box Foldable cable tray T

WI white, plastic

COLOURS AND MATERIALS

• -

• •

• • -

• -

Included colour representations, restrictions on colour and panel combinations as well as permitted fabric and leather collections  see following pages or product data sheet „colours & materials“

WORKSTATION COLOURS & MATERIALS

COLOURS & MATERIALS MELAMINE

MW white

MQ office white

MSW snow white 1

MC canvas

MP platinum

MA aluminium

MH stone grey 1

TM clay 1

MS slate

MD urban grey 1

MB basalt

MJG jade green 1

DISCONTINUATION: OCTOBER 2027

EZ oak vicenza 1

MEK oak kendal 1

MAK maple classic 1

MBK beech classic 1

NG walnut grey 1

MNP walnut pavia 1

not available for compact top

WORKSTATION COLOURS AND MATERIALS

COLOURS AND MATERIALS VENEER

EF oak natural 1

EY oak sylt 1

EG oak grey 1

ER oak amaretto 1

EV oak vulcano 1

NF american walnut 1

NR walnut siena 1

NB walnut umbra 1

NA walnut anthracite 1

KD chestnut natural 1

KP chestnut brown 1

KQ chestnut grey 1

AK canadian maple 1

BJ bamboo

BG beech grey 1

Veneers also available in matt finish.

FENIX™

white

black

WORKSTATION COLOURS & MATERIALS

COLOURS & MATERIALS METAL SURFACE POWDER-COATED

white

aluminium coloured

black

ALUMINIUM ANODISED

AL aluminium