product-data-sheet-bene-locker-s by Bene Office

LOCKER_S LOCKING GOOD LOCKER_S creates space for organization in the open office and offers individual storage solutions for open workspaces. Documents and personal items can be securely stored. Single-row, double-row, and triple-row storage modules as well as LOCKER_S Wardrobes can be flexibly combined. The fronts are available in up to three different colors. Optionally, the LOCKER_S unit with panels – consisting of a top panel, side panels, and rear wall – can be equipped.

A plinth panel is also available, which particularly enhances the look of freestanding storage units. LOCKER_S is practical and secure: doors and drawers can optionally be fitted with an NFC lock, cylinder lock, or combination lock. Add-ons like the LOCKER_S Box, LOCKER_S Bench with seat upholstery, or the LOCKER_S Planter Box offer additional possibilities for individual design.

INSPIRING OFFICES. SINCE 1790.

LOCKER_S PRODUCT DESCRIPTION

PRODUCT DESCRIPTION LOCKER_S

LOCKER_S Wardrobe

LOCKER_S Lower cabinet

LOCKER_S Upper cabinet

LOCKER_S Box

Seat upholstery

LOCKER_S Bench

LOCKER_S Planter Box

3 2 5 2

CABINET TYPES Lower cabinet The lower cabinet is delivered as standard with a top panel and 4 to 8 adjustment leg per cabinet, height-adjustable by +20 mm.

Upper cabinet The upper cabinet can only be installed on top of the lower cabinet. It is connected to it with four chipboard screws.

MAXIMUM LOAD OF THE SHELVES The maximum load specified in the table applies to all shelves. 150 kg / m2 Shelf length [mm]

412

562

Maximum load [kg]

2 © Bene GmbH, 08/2026

LOCKER_S PRODUCT DESCRIPTION

PRODUCT DESCRIPTION LOCKER_S, UPPER AND LOWER CABINET (single-row / double-row / triple-row) 1 2 3

1 8

4 5 6

Hinged door: 19 mm chipboard Mail slot with letter compartment * Business card holder * Lock * (NFC lock) Visible side: 19 mm chipboard Base with KX adjustment leg: 19 mm chipboard / +25 mm adjustment leg Optional LOCKER_S with panels: plastic in asphalt or coloured aluminium. 4-sided plinth profile with corner connectors. Rear wall: 16 mm chipboard Intermediate shelf and centre panel (for double- and triple-row): 19 mm chipboard * Optional, see chapter “Options” for details.

6 5

In addition to the version with hinged doors, the top or bottom niche can optionally be designed as an open version. This applies to both lower and upper cabinets.

For double- or triple-row cabinets, this option extends over the entire cabinet width.

LOCKER_S WARDROBE The LOCKER_S wardrobe can be configured with hinged doors, open, or open without rear wall. The version without rear panel must always be connected to another cabinet and cannot stand alone. In the open version, a cover panel for the adjustment leg is included as standard. It is finished in the carcass colour, but can optionally be selected in a different colour, in either melamine or veneer (matt). Wardrobes with doors are equipped with ventilation slots at the top and bottom. Clothes Rail · Material & colour: aluminium tube, powder-coated in black, with plastic edge strip · Orientation widthwise for depths ≥ 600 mm · Orientation depthwise for depths < 600 mm and width = 600 mm

* with hinged door

with rear wall

open, without rear wall

*For the wardrobe version with hinged door, the following locking options are available: incl. handle (without lock), incl. lock, incl. lock (with key number), incl. lock (without interchangeable cylinder), incl. NFC lock, incl. combination lock (fixed code 59 or free code 58). Details can be found in the chapter “Options”.

3 © Bene GmbH, 08/2026

LOCKER_S PRODUCT DESCRIPTION

PRODUCT DESCRIPTION LOCKER_S WITH PANELS 1

3 2

Top panel: 19 mm chipboard in melamine or veneer

Side panel: 19 mm chipboard in melamine or veneer

Overlay rear panel: 19 mm chipboard in melamine, veneer, optionally with whiteboard laminate white or with pinnable fabric (for carcass height <= 1145 mm)

LOCKER_S BOX Optionally, a LOCKER_S Box can be placed on any type of locker unit. Panel thickness: 19 mm chipboard in melamine or (matte) veneer. Widths: 450 mm – 1,800 mm, heights: 375 mm – 625 mm, depths: 300 mm – 600 mm. Front type: open. The following variants are available:

Flush with LOCKER_S hinged door

Flush with LOCKER_S carcass (21 mm)

with overhang to LOCKER_S hinged door (+21 mm)

NOTE: Depending on the variant, the rear wall of the LOCKER_S box is recessed by different amounts.

PLANNING NOTE: The LOCKER_S Box cannot be positioned in the bottom row.

4 © Bene GmbH, 08/2026

LOCKER_S PRODUCT DESCRIPTION

PRODUCT DESCRIPTION LOCKER_S BENCH The LOCKER_S Bench complements the LOCKER_S cabinet with a practical and comfortable seating solution. It can be placed directly in front of the cabinet and aligns precisely with the top edge of the hinged doors. The bench is equipped with an adjustable base. Available options include KX adjustment leg (height 25 mm). Optionally, a base panel in asphalt or aluminium coloured plastic can be added. The top panel is equipped with a sliding fitting for easy assembly. The carcass is made of 19 mm chipboard, available in melamine or veneer (matte). NOTE: When planning, the „Preparation for seat upholstery“ option must be selected for the LOCKER_S lower cabinet. This option is only available for lower cabinets.

SEAT UPHOLSTERY FOR LOCKER_S BENCH The LOCKER_S Bench can optionally be fitted with seat upholstery, attached using press studs. Covers are available in fabric groups P0–P5 according to the Bene collection. Further information  see product data sheet: colours & materials. Dimensions: width 415 mm, depth 415 mm, height 32,5 mm The seat upholstery must not be positioned directly in front of a compartment that can be opened.

LOCKER_S PLANTER BOX The LOCKER_S Planter Box is available as a freestanding version with base. For the base type, KX adjustment leg (height 25 mm) are available. Optionally, a plastic base panel in asphalt or aluminium coloured can be added. The LOCKER_S Planter Box can be fitted with or without Planter Trays for planting. NOTE: When planning, the „Preparation for Planter Box“ option must be selected for the LOCKER_S cabinet.

Planter Tray: Material made of 100 % PCR polystyrene (post consumer recycling material), always in black, recyclable and reusable after its life cycle. Planter Box: Chipboard, 19 mm, in the same design as the cabinet or different, if desired. The Planter Box with matching Planter Trays is available in the following dimensions: · Width 450 - 2.000 mm · Depth 450 - 600 mm · Height 354 mm The following should be considered when configuring the Planter Box and Planter Tray: Up to a width of 483 mm no middle panel is provided, from width 484 mm a middle panel can be selected on request, from width 1.200 mm the Planter Box is always equipped with a middle panel. with KX adjustment leg + base panel

with KX adjustment leg

up to width 483 mm

width 484 - 1.199 mm

PLANNING NOTES

from width 1.200 mm

Please note the height difference between the LOCKER_S Bench (398 mm) and the LOCKER_S Planter Box (379 mm) when positioned side by side.

Due to its weight and height, the LOCKER_S Planter Box must not be used as an upper unit.

5 © Bene GmbH, 08/2026

LOCKER_S HEIGHT GRID

HEIGHT GRID LOWER CABINETS (carcass +25 mm base height) 300 - 600 371 450

300 - 600

496 371

308,5 300 - 600

558,5 300 - 600

300 - 600

371

308,5

double-row max. 1.875 mm

496

371

296

1.875 - 2.250mm

263,86

450

746

1.500 - 1.874mm

300 - 600

933,5

300 - 600

621

450

300 - 600

1.121

371

246

300 - 600

371

triple-row max. 1.150 mm

277,25

450

1.125 - 1.524mm

300 - 600

746

300 - 600

464,75

450

750 - 1.124mm

300 - 600

371

375 - 749mm

300 - 600

The specified door heights apply to the illustrated standard height grid (shown in bold). Door heights for intermediate dimensions can be calculated manually. Calculation for upper cabinets: Height ÷ number of doors − 4 mm clearance

UPPER CABINETS (carcass without base) Heights

300 - 600

464,75

371

296 double-row max. 1.900 mm

263,86

1.900 - 2.275mm

300 - 600

746

1.525 -1.899mm

450

300 - 600

933,5

300 - 600

371

triple-row max. 1.150 mm

277,25

450

1.150 - 1.524mm

300 - 600 746

371

246

775 - 1.149mm

300 - 600

621

450

558,5

400 - 774mm

1.121

Overall heights

The specified door heights apply to the illustrated standard height grid (shown in bold). For LOCKER_S with two or three rows, the row heights differ. These are listed in the „Dimensions“ section. Door heights for intermediate dimensions can be calculated manually. Calculation for lower cabinets: (Height − 25 mm base height) ÷ number of doors − 4 mm clearance

6 © Bene GmbH, 08/2026

LOCKER_S DIMENSIONS

DIMENSIONS The dimensions are generally variable; however, certain suggested values for widths, depths, and heights are predefined. Intermediate measurements in millimeter increments are possible. Detailed information can be found in the pCon products. When planning with the defined suggested values, the height grids between the different modules align and are easily combinable.

LOCKER_S SINGLE-ROW

W: 300 - 600 mm D: 300 - 600 mm H: 400 mm 775 mm 1.150 mm 1.151 mm* 1.525 mm 1.900 mm

LOCKER_S DOUBLE-ROW

1 door 1, 2, 3 doors 1, 2, 3, 4 doors 2, 3, 4 doors 2, 3, 4, 5 doors 2, 3, 4, 5, 6, 7 doors

* Single door across the entire cabinet height not available over 1.151 mm onwards.

W: 600 - 1.200 mm D: 300 - 600 mm H: 400 mm 775 mm 1.150 mm 1.151 mm* 1.525 mm 1.900 mm

2 doors 2, 4, 6 doors 2, 4, 6, 8 doors 4, 6, 8 doors 4, 6, 8, 10 doors 4, 6, 8, 10 doors

LOCKER_S TRIPLE-ROW

W: 900 - 1.800 mm D: 300 - 600 mm H: 400 mm 775 mm 1.150 mm

3 doors 3, 6 doors 3, 6, 9 doors

* Single door across the entire cabinet height not available over 1.151 mm onwards.

LOCKER_S WARDROBE

with hinged door W: 400 - 600 mm D: 300 - 900 mm H: 1.525 - 2.275 mm from 1.763: with hat shelf

open wardrobe W: 400 - 900 mm D: 300 - 900 mm H: 1.525 - 2.275 mm from 1.763: with hat shelf

without rear wall W: 400 - 900 mm D: 300 - 900 mm H: 1.525 - 2.275 mm from 1.763: with hat shelf

NOTE: The width or depth must be at least 600 mm.

7 © Bene GmbH, 08/2026

LOCKER_S DIMENSIONS

DIMENSIONS LOCKER_S WITH PANELS W: Cover panel, rear wall: user-defined, clear widths of the LOCKER_S, are variable from 300 - 7.200 mm D: 450 - 600 mm H: variable from 394 to 2.269 mm

Divisions (width) Cover panel · max. 2 divisions are possible; min. one division from 2.401 onwards Rear wall

· max. 5 divisions are possible; for height < = 1.250 mm: from 2.000 onwards (melamine), from 1.560 onwards (veneer), from 1.250 onwards (fabric), from 1.240 (whiteboard) · for height > 1.250 mm: from 1.200 onwards (melamine / veneer )

The default value is a uniform division (e.g. half width); however, a different division for cover panel can also be entered.

LOCKER_S BOX

LOCKER_S BENCH

LOCKER_S PLANTER BOX

W: 450 - 1.800 mm D: 300 - 600 mm H: 375 - 625 mm

W: 450 - 2.500 mm D: 450 - 600 mm H: 398 mm

W: 450 - 2.000 mm D: 450 - 600 mm H: 379 mm

8 © Bene GmbH, 08/2026

LOCKER_S OPTIONS

OPTIONS MAIL SLOT INCL. LETTER COMPARTMENT Mail slot with metal letter compartment

Mail slot with chipboard letter compartment

Material & colour: powder-coated steel, black

Material & colour: 19 mm chipboard, in carcass colour

BUSINESS CARD HOLDER Basic

Premium

Dimensions: width 88 mm, height 58 mm, depth 3,5 mm

Dimensions: width 92,5 mm, height 60,2 mm, depth 4,5 mm

Material & colour: plastic, transparent, thin-walled foil

Material & colour: plastic, black

NUMBERING LABEL (SELF-ADHESIVE) The LOCKER_S can optionally be equipped with a self-adhesive numbering label. Font and size are predefined. The numbers are available in white or black and can be selected within the range 01 to 99. The desired number range can be set directly in pCon.planner during configuration. Labeling is done during installation using positioning corners on the transfer foil, not in the factory.

Height is always fixed at 71.6 mm, width varies depending on the number. Standard positioning on the front, lock side, bottom.

Positioning on the front, hinge side, bottom – used when there is no space on the lock side, depending on front height and selected options.

9 © Bene GmbH, 08/2026

LOCKER_S OPTIONS

OPTIONS COMBINATION LOCKS FIXCODE DIAL LOCK 59 The FIXCODE combination lock is designed for long-term use or for usage over defined periods (e.g. by project teams). The code is selected freely by the user and needs to be set initially using the programming pin (which is part of the service key package); it then stays the same until it is reset. Link to explanatory video on the FIXCODE lock https://www.youtube.com/watch?v=hArf44hod2Q

FREECODE DIAL LOCK 58 With the freely selectable combination lock, a number combination is defined before each locking operation, which is cancelled again after each opening. This means that a new code must be defined each time the lock is opened and closed. The FREECODE lock is designed for constantly changing users, e.g. for lockers in sports and wellness centres, libraries, museums, trade fairs and hotels. Link to explanatory video on the FREECODE lock https://www.youtube.com/watch?v=GucJMYDSGSY

NOTE: When you order LOCKER_S with a combination lock it is recommended to also order the service key package.

LOCK POSITION

COMBINATION LOCK with business card holder

with business card holder and mail slot

with mail slot

Rear side: operating instr. for combination lock

Optionally, the position can be mirrored downwards in the top compartment for all lock variants — regardless of the LOCKER_S height.

CYLINDER LOCK

Includes folding and flat key. Can optionally be ordered with key numbers or without interchangeable cylinder.

NFC LOCK

with business card holder

with mail slot

with business card holder and mail slot

with business card holder

with mail slot

with business card holder and mail slot

Details about the NFC Lock – see pages 12–13.

10 © Bene GmbH, 08/2026

LOCKER_S OPTIONS

OPTIONS CHANGEABLE CYLINDER - CONVERSION FROM Z70 TO Z60 Z70 locking system - up to and including calendar week 36 Sep. 2025 The Z70 changeable cylinder covers key numbers from B51004 - B52994.

Z60 locking system - from delivery calendar week 37 Sep. 2025 The Z60 changeable cylinder covers key numbers from 26001 - 26200.

The Z60 changeable cylinder fits into all existing locks. lock

lock

Z60 changeable cylinder

Z70 changeable cylinder

Z70 folding key cap: colour slate

from delivery calendar week 37 2025 - Z60 folding key cap: colour black

Z60 flat key

Z70 flat key

CONFIGURATION OPTIONS - in furniture - as a set (one changeable cylinder, one flat key and one folding key) - service key

locking system Z70

up to and including calendar week 36 September 2025

random (no definition)

locking system Z60

from delivery calendar week 37 September 2025

random (no definition) A: B51104 according to key code

26001 - 26200

B: B51204 C: B51304 D: B51404

Repeat orders are only possible as a set (always consists of a changeable cylinder, a flat key and a folding key) no individual keys are available!

locking group E: B51504 F: B51604

The service key for the Z70 system is not compatible with the Z60 system. Each system requires its own service key!

G: B51704 H: B51804 according to key code

B51004 - B52994

11 © Bene GmbH, 08/2026

LOCKER_S OPTIONS

OPTIONS NFC LOCK The NFC Lock in the Bene LOCKER_S allows personal items to be stored simply and securely. No keys or batteries are required for operation – the NFC field of the smartphone is used to supply the power. Handling is straightforward since the lock is operated with an app. The elimination of cabling and batteries significantly reduces installation and maintenance workload. Optional management software is available for a large number of locks. This makes it easier for the facility manager to organise and assign authorisations. · Intended for indoor use: temperature range + 5 °C to + 40 °C · IP protection class: IP52 · RoHS & REACH compliance: Yes, CE conformity: Yes · Communication & power transmission: NFC · A compatible mobile phone (with NFC functionality) and the appropriate software are required to operate (lock and open) the NFC Lock. · can also be ordered as a supplemental set (supplemental set 1 for mounting on outer side or supplemental set 2 for mounting on centre side) The NFC Lock always requires the corresponding app (either SMALOX App or SMALOX Enterprise App) on the mobile phone for operation. Prerequisite for the functionality of the app: · Android 8.0 or higher · iOS 14.0 or higher

INITIAL COMMISSIONING (PROVISIONING) OF THE NFC LOCK An administrator must be assigned to each NFC Lock during initial commissioning (provisioning). Provisioning must be carried out once by the company‘s IT department or facility manager. A description of the first steps can be found in the installation and operating instructions under LOCKER_S on build.bene.com.

· easy to use · sustainable smart lock · innovative technology · battery-free · produced in Austria

With this step, the NFC Lock switches from factory settings to operating mode. This applies to use with both the SMALOX app and the SMALOX ENTERPRISE app. Without the initial commissioning (provisioning), the NFC Lock has no information about the environment (client) or the mode used (stand-alone or cloud service) and is therefore not functional. The NFC lock has two operating modes. Further details are described on the following pages.

12 © Bene GmbH, 08/2026

LOCKER_S OPTIONS

OPTIONS 1. OPERATION WITH THE SMALOX APP - stand-alone version, free operation without cloud service

SMALOX

iOS App Store

Android PlayStore

User

Lock / unlock via NFC

NFC Lock

Manage lock configuration Admin

Quick Start Guide and tutorials: https://www.smalox.com/en/smalox-standalone The app guides you through the steps of the initial commissioning of the NFC Lock. The person who commissions the lock for the first time (provisioning) automatically becomes the administrator. During the process, you will be prompted to enter the factory default administrator password. It is strongly recommended that you change the password in the next step and set a customised administrator password. This increases security and protects against unauthorised access.

Important note: If the NFC Lock is used in the stand-alone version, i.e. with the SMALOX App without management software (SMALOX Enterprise App), please note that the administrator password cannot be reset in this case if it is forgotten or lost. It is therefore recommended to make the administrator password accessible to a second trusted person or to keep it in a safe place. Without the administrator password, neither emergency opening nor resetting the NFC Lock to factory settings is possible.

2ND OPTION: OPERATION WITH THE SMALOX ENTERPRISE APP

SMALOX Enterprise

iOS App Store

Android PlayStore

Quick Start Guide and tutorials: https://www.smalox.com/en/smalox-enterprise

Operation is carried out with the SMALOX ENTERPRISE or SMALOX ENTERPRISE PREMIUM management software, which is subject to a charge and includes a cloud service. The desktop-based management software offers convenient administration of access and usage authorisations. It is available in two expansion stages: · SMALOX ENTERPRISE · SMALOX ENTERPRISE PREMIUM Both versions differ in their range of functions in terms of connection, administration, authorisation assignment and evaluation (see table for details). FUNCTIONS OF THE MANAGEMENT SOFTWARE: · Management of administrators and users: Administrators and users can be defined and managed centrally (by IT or the facility manager). Authorisations can be easily assigned or withdrawn. · Extended functions in SMALOX ENTERPRISE PREMIUM: Thanks to the cloud connection, the software can be seamlessly integrated into the company‘s IT environment via SSO (single sign-on). Employees use their company login data, allowing authorisations to be managed centrally by IT.

13 © Bene GmbH, 08/2026

LOCKER_S OPTIONS

OPTIONS NFC LOCK - FUNCTION OVERVIEW OF THE APP FAMILY Further information: https://www.smalox.com/office-furniture SMALOX Enterprise

SMALOX

SMALOX APP FUNCTION DESCRIPTION

ENTERPRISE

free application software (stand-alone)

ENTERPRISE PREMIUM

paid management software (cloud service)

Locking / unlocking

•

Self-registration of users

•

Lock mode configurable

•

Manage user authorisations

•

Add / remove users

•

Admin add/remove

•

Registration by admin

•

Time limited access

•

Manage locks

•

Create & manage structure tree

•

Basic statistics

•

Detailed statistics

•

Connect employee database

•

Single sign-on

•

Assign authorisation by location

•

Assign team compartments

•

Manage number of locks per employee

•

Status report per lock

•

Extended support

•

14 © Bene GmbH, 08/2026

LOCKER_S OPTIONS

OPTIONS SLIDE-IN SHELF When configured with a slide-in shelf (plastic shelf supports), it is always preinstalled in the centre. If this option is chosen, the shelves are automatically fitted throughout the entire cabinet. The rows of shelving holes (3 height positions) are always in the centre in the niche. If the slide-in shelf is to be installed 50 mm higher or lower, the hinged door must be unhinged, the slide-in shelf pushed out and the plastic shelf supports (power connection) repositioned. Shelf material: chipboard 19 mm. Please note: if no slide-in shelf is configured, the LOCKER_S is delivered without rows of shelving holes.

mm 50 mm 50

DRAWER MODULE The bottom front can optionally be designed as a drawer. Drawer front, bottom and rear wall made of chipboard and metal frames with full extension. If a mail slot is selected for the LOCKER_S, the drawer will also include a mail slot with metal or chipboard letter compartment. Drawer width and depth always the same for suggested types, with intermediate dimensions, the width and depth of the drawer changes.

267,86

312,5

375

469

625

NOTES: If slide-in shelfs are selected at the same time as the drawer modules, the slide-in shelfs are omitted in the lowest modules. The drawer module can only be configured with lower cabinets.

LOCKER BAG Designed to complement LOCKER_S. A system for secure personal storage paired with a bag that makes mobility effortless. Together, they support a new way of working: flexible, organised, and seamlessly connected. Further information  Product data sheet Locker Bag

LOCKER_S COLOURS AND MATERIALS

COLOURS AND MATERIALS The following materials and colours are available for this product:

Plastic

Fabric P0 - P5

Whiteboard laminate

- carcass

Veneer

Product LOCKER_S Storage

Melamine

•. . . . . . . . . . . available -. . . . . . . . . . . not available

•

- front

•

- rear wall

•

- base

•

LOCKER_S Wardrobe

- carcass

•

- front

•

- rear wall

•

- base

•

LOCKER_S with panels

- side panels

•

- rear wall

•

- add-on outer rear wall

•

LOCKER_S Box

- carcass

•

LOCKER_S Bench

- carcass

•

- base

•

Seat upholstery for bench LOCKER_S Planter Box

- carcass

•

- base

•

Included colour representations, restrictions on colour and panel combinations as well as permitted fabric collections  see following pages or product data sheet „colours & materials“

LOCKER_S COLOURS AND MATERIALS

COLOURS AND MATERIALS MELAMINE

MW white

MQ office white

MSW snow white

MC canvas

MP platinum

MA aluminium

MH stone grey

TM clay

MS slate

MD urban grey

MB basalt

MJG jade green

DISCONTINUATION: OCTOBER 2027

EZ oak vicenza

MEK oak kendal

MAK maple classic

MBK beech classic

NG walnut grey

MNP walnut pavia

LOCKER_S COLOURS AND MATERIALS

COLOURS AND MATERIALS VENEER

EF oak natural

EY oak sylt

EG oak grey

ER oak amaretto

EV oak vulcano

NF american walnut

NR walnut siena

NB walnut umbra

NA walnut anthracite

KD chestnut natural

KP chestnut brown

KQ chestnut grey

AK canadian maple

BJ bamboo

BG beech grey

BU beech natural

Veneers also available in matt finish.

PLASTIC – BASE

AS asphalt

AL aluminium coloured

LOCKER_S COLOURS AND MATERIALS

COLOURS AND MATERIALS INN (FABRIC_01)

5W white

5A canvas

5B platinum

5D slate

5T anthracite

5H basalt

4M clay

4E ice blue

4K carmine red

4X mustard

4W green

4B azure blue

Various material collections are available as cover materials: Xtreme Plus, Urban Plus, Inn, Era, Step, Step Melange, Soft Next, Remix, Mainline Flax, Focus, Panama, Fiord, Steelcut, Assam, Focus Melange, Artisan, The Cool, Steelcut Trio, Hallingdal, Elle, Coda. More information about the specific fabric collections is available at www.bene.com. Our outdoor fabrics can also be used on products for indoor use. However, this does not mean that the indoor products are suitable for outdoor use.

LOCKER_S THE BENE RESPONSIBILITY

THE BENE RESPONSIBILITY Bene plays a pioneering role in the field of sustainability. This spans all company divisions – from product development, procurement, production, and logistics to product recycling. From the first sketch through to series production, ecological requirements are always an important factor in the product development process. It includes selecting environmentally compatible materials, such as certified timbers from sustainably managed forests, using recycled materials and increasing the use of renewable raw materials. Other important requirements for a sustainable product design are labelling the materials, their ability to be repaired, and a long service life for the components used, with the aim to integrate them into a second product life cycle. To guarantee a high recyclability standard for our products at the end of their service life, we avoid composites as much as possible and develop furniture that allows for disassembly by material type. Bene products are sourced and made in Europe. 99.9% of all deliveries reach us from a European country. Around 94% of all raw material supplies come from Austria and Germany. Around 93% of the raw materials comes from suppliers within 500 kilometres of our production site. SUSTAINABLE RAW-MATERIALS At Bene, the following materials are used as a matter of course: · chipboards low in formaldehyde · glues low in formaldehyde · water-based varnish systems · recyclable materials · materials with a high recycling share · PVC-free synthetics

Bene guarantees products free from: · CMR substances · halogenated solvents in synthetics · chlorinated hydrocarbons · heavy metal pigments · materials with azo pigments · Coatings with biocidal effects (such as wood preservatives, pesticides).

CONTRIBUTION TO BUILDING CERTIFICATIONS In the context of ecological building certification, design systems such as furniture and dividing walls help to achieve a good result and a higher score. Bene's products make a contribution towards the LEED, WELL Building Standard, DGNB, BREEAM, etc. certifications. Criteria include, for example, environmental product declarations, indoor air quality, acoustics and convertibility.

LOCKER_S Example configuration · LOCKER_S · Double-row · 901 x 1.525 x 450 mm · Melamine, chipboard 19 mm · Total weight 72,36 kg

Environmental key figures · 98,4 % sortable by type · 98,1 % recyclable · 88,3 % of contents are renewable raw materials · 67,95 % recycled production materials

Materials Plastic 0.84 kg / 1.16 %

Adhesives 0.01 kg / 0.02 %

Zinc 1.02 kg / 1.41 % Wood 66.83 kg / 92.37 % Steel 3.65 kg / 5.05 %

For each standard product configuration, Environmental Product Declarations (Lifecycle Data Sheets / LCDS) can be provided. These are prepared in accordance with EN ISO 14040, EN ISO 14044 and the applicable Product Category Rules (PCR) of the International EPD® System for UN CPC 3811, 3812 and 3814. The LCDS include the Product Carbon Footprint (PCF) covering the entire life cycle (cradle-to-cradle). Environmental information from Bene: https://bene.com/en/bene/sustainability