Issuu

CT PEDESTAL EVERYTHING’S UNDER CONTROL. ALWAYS WHERE YOU NEED IT. The Bene CT pedestals are practical all-rounder. Directly positioned under the desk, they complete the working place and create order: documents and personal items are clearly stowed an can be rapidly fetched. The mobile pedestal with seat upholstered invites to a short interaction. The CT pedestal convinces with its clear design and high functionality.

It presents itself cubically and clearly at the working place and offers storage for documents and personal items. Mobile or fixed, in different sizes, in varied materials and colours, having insides as required, the CT pedestal is an essential assistant in office routine.

INSPIRING OFFICES. SINCE 1790.

CT PEDESTAL PRODUCT DESCRIPTION

PRODUCT DESCRIPTION 1 2 3 4

Rear wall: 19 mm chipboard Visible sides: 19 mm chipboard Top panel: as 19 mm chipboard, 25 mm1 chipboard, 13 mm1 compact board Front:16 mm chipboard 4

only for fixed pedestal Rear wall and visible sides together form the carcass and therefore always have the same design.

OVERVIEW & DIMENSIONS The three pedestal types differ according to carcass size and usage purpose.

Mobile pedestal

Supporting pedestal

Fixed pedestal

W 330 mm / 430 mm D 445 mm 1 / 600 mm / 800 mm H 548 mm (9 HE = height units) / 598 mm (10 HE)

330 mm / 430 mm 600 mm / 800 mm 548 mm (9 HE = height units) / 598 mm (10 HE)

330 mm / 430 mm 600 mm / 800 mm 740 mm (12 HE)

· with castors (hard / soft) · free-standing

· together with adjustment legs · below the desk, left or right · can be connected to fixed or height-adjustable desks · connection fittings replace the desk slab-end

· together with adjustment legs · free-standing · attached to desk at fixed height · attached to height-adjustable desk · without top panel as continuous table top (only for desks with fixed heights) · across two desks adjustment legs can be levelled up to + 20 mm.

only possible in combination with width 430 mm, drawers with full pull-out and vertical grip groove

2 © Bene GmbH, 08/2026

CT PEDESTAL OPTIONS

OPTIONS CONTINUOUS TABLETOP If a fixed pedestal is to be connected to a table with a fixed height, then a continuous tabletop can be selected.

FIXED PEDESTAL TOP The top can be extended to the rear using an excess length of top panel, depending on the pedestal use. This option exists for fixed pedestals.

MOBILE PEDESTAL SEAT UPHOLSTERED The mobile pedestal can be optionally provided with a seat upholstered whose dimensions vary according to pedestal width. The seat upholstered is fastened with pressure lock or Velcro fasteners. Maximum load: 75 kg · for 330 mm pedestal width: W x D 315 x 415 mm · for 430 mm pedestal width: W x D 415 x 415 mm Covers are available in the fabric groups P0 - P5 in accordance with the Bene seating furniture collection. For additional information, see  price list “Colours & materials”

ANTI-TIPPING PROTECTION

LOCK Lock with replaceable cylinder, including 2 keys (1 of them is foldable) and locking bar. Optional without lock and lock hole but with locking bar.

An anti-tipping protection is provided for pedestals with a front division comprising 6 HE drawers. A counterweight or supporting roller can be selected for this. The required number depends on the pedestal type, front division and drawer type.

Counterweight Concrete plate fastened to the inside of the rear wall.

Supporting roller Is mounted in front on the lowermost drawer. Colour: black.

3 © Bene GmbH, 08/2026

CT PEDESTAL OPTIONS

OPTIONS CHANGEABLE CYLINDER Z70 locking system - up to and including calendar week 36 Sep. 2025 The Z70 changeable cylinder covers key numbers from B51004 - B52994.

Z60 locking system - from delivery calendar week 37 Sep. 2025 The Z60 changeable cylinder covers key numbers from 26001 - 26200.

The Z60 changeable cylinder fits into all existing locks. lock

lock

Z60 changeable cylinder

Z70 changeable cylinder

Z70 folding key cap: colour slate

from delivery calendar week 37 2025 - Z60 folding key cap: colour black

Z60 flat key

Z70 flat key

CONFIGURATION OPTIONS - in furniture - as a set (one changeable cylinder, one flat key and one folding key) - service key

locking system Z70

up to and including calendar week 36 September 2025

random (no definition)

locking system Z60

from delivery calendar week 37 September 2025

random (no definition) A: B51104 according to key code

26001 - 26200

B: B51204 C: B51304 D: B51404

Repeat orders are only possible as a set (always consists of a changeable cylinder, a flat key and a folding key) no individual keys are available!

locking group E: B51504 F: B51604

The service key for the Z70 system is not compatible with the Z60 system. Each system requires its own service key!

G: B51704 H: B51804 according to key code

B51004 - B52994

4 © Bene GmbH, 08/2026

CT PEDESTAL OPTIONS

OPTIONS DRAWERS Metal drawers with full or partial pull-out · Interlock system · Self-closing mechanism with/without shock absorber · Push-to-open function 6 HE drawers at the bottom are configured with full pull-outs, but can be optionally configured with partial pull-outs. For 6 HE drawers, the anti-tipping protection is implemented as a counterweight or optionally as a supporting roller. Drawer front The pedestal front is either provided with a vertical grip groove or with a push-to-open function. Drawers with push-to-open function open comfortably at the light press of a finger.

Front divisions - mobile pedestal and supporting pedestal, 9 HE 1-2-3-3

1-2-2-4

1-2-6

3-3-3

3-6 HE = height unit with 50 mm nominal height Example: 9 HE (1-2-3-3) corresponds to 50 mm – 100 mm – 150 mm – 150 mm.

Front divisions - mobile pedestal and supporting pedestal, 10 HE 1-3-3-3

1-2-3-4

1-3-6

3-3-4

Partial pull-out system

Front divisions - fixed pedestal, 12 HE 1-2-3-6

1-2-3-3-3

Full pull-out

Pull-out length

useful height

useful depth

Pedestal depth

pull-out length

useful depth1

Pedestal depth

600 mm 800 mm

365 mm 495 mm

490 mm 690 mm

Drawer width

drawer inner width1

330 mm 430 mm

227 mm 327 mm

330 mm 430 mm

445 mm 334 mm 330 mm 600 mm 540 mm 490 mm 800 mm 740 mm 690 mm Drawer width drawer inner width1

Drawer height

nominal height

useful height1

2 HE 3 HE 4 HE 6 HE 2 3 HE top

100 mm 150 mm 200 mm 300 mm 150 mm

90 mm 140 mm 190 mm 290 mm 156 mm

1 2

pull-out length

useful depth1

330 mm 430 mm

227 mm 327 mm

330 mm 430 mm

Drawer height

nominal height

useful height1

2 HE 3 HE 4 HE 6 HE 3 HE top

100 mm 150 mm 200 mm 300 mm 150 mm

90 mm 140 mm 190 mm 290 mm 156 mm

inner width with drawer height of 6 HE, the inner width is reduced by 4 mm

5 © Bene GmbH, 08/2026

CT PEDESTAL OPTIONAL BUILT-IN COMPONENTS

OPTIONAL BUILT-IN COMPONENTS HANGING CRADLE FOR 6 HE DRAWERS 1 Material and colour: Legs made from black synthetic material, frame made of nickel-plated steel profile.

NON-SLIP MAT 1

LENGTH DIVIDER

WIDTH DIVIDER

STAMP HOLDER

STATIONARY INSERT 430 MM

ACCESSORY TRAY

258 x 348 mm for all pedestal widths

ACCESSORY EXTENSION

Standard

XL (for 430 mm width)

not possible for depth 445 mm

6 © Bene GmbH, 08/2026

CT PEDESTAL COLOURS AND MATERIALS

COLOURS AND MATERIALS MATERIALS AND SURFACES This product is available in the following materials and colours. • . . . . . . . . . . available - . . . . . . . . . . not available

Surface

Melamine Veneer

Tabletop

Carcass

Front

• •

The bottom is designed in slate melamine (MS). Colours available in each group can be found in corresponding guide  „Colours & materials”

CT PEDESTAL COLOURS AND MATERIALS

COLOURS & MATERIALS MELAMINE

MW white

MQ office white

MSW snow white

MC canvas

MP platinum

MA aluminium

MH stone grey

TM clay

MS slate

MD urban grey

MB basalt

MJG jade green

DISCONTINUATION: OCTOBER 2027

EZ oak vicenza

MEK oak kendal

MAK maple classic

MBK beech classic

NG walnut grey

MNP walnut pavia

CT PEDESTAL COLOURS AND MATERIALS

COLOURS & MATERIALS VENEER

EF oak natural

EY oak sylt

EG oak grey

ER oak amaretto

EV oak vulcano

NF american walnut

NR walnut siena

NB walnut umbra

NA walnut anthracite

KD chestnut natural

KP chestnut brown

KQ chestnut grey

AK canadian maple

BJ bamboo

BG beech grey

BU beech natural

Veneers also available in matt finish.

CT PEDESTAL COLOURS & MATERIALS

COLOURS & MATERIALS FABRIC

Various fabric collections are available for the cover: Xtreme Plus, Urban Plus, Era, Step, Step Melange, Soft Next, Remix, Mainline Flax, Focus, Bonsai Reboot, Panama, Fiord, Steelcut, Fox, Assam, Focus Melange, Artisan, The Cool, Steelcut Trio, Hallingdal, Elle, Coda. More information about the specific fabric and leather collections is available at www.bene.com. Our outdoor fabrics can also be used on products for indoor use. However, this does not mean that the indoor products are suitable for outdoor use.

CT PEDESTAL THE BENE RESPONSIBILITY

THE BENE RESPONSIBILITY Bene plays a pioneering role in the field of sustainability. This spans all company divisions – from product development, procurement, production, and logistics to product recycling. From the first sketch through to series production, ecological requirements are always an important factor in the product development process. It includes selecting environmentally compatible materials, such as certified timbers from sustainably managed forests, using recycled materials and increasing the use of renewable raw materials. Other important requirements for a sustainable product design are labelling the materials, their ability to be repaired, and a long service life for the components used, with the aim to integrate them into a second product life cycle. To guarantee a high recyclability standard for our products at the end of their service life, we avoid composites as much as possible and develop furniture that allows for disassembly by material type. Bene products are sourced and made in Europe. 99.9% of all deliveries reach us from a European country. Around 94% of all raw material supplies come from Austria and Germany. Around 93% of the raw materials comes from suppliers within 500 kilometres of our production site. SUSTAINABLE RAW-MATERIALS At Bene, the following materials are used as a matter of course: · chipboards low in formaldehyde · glues low in formaldehyde · water-based varnish systems · recyclable materials · materials with a high recycling share · PVC-free synthetics

Bene guarantees products free from: · CMR substances · halogenated solvents in synthetics · chlorinated hydrocarbons · heavy metal pigments · materials with azo pigments · Coatings with biocidal effects (such as wood preservatives, pesticides).

CONTRIBUTION TO BUILDING CERTIFICATIONS In the context of ecological building certification, design systems such as furniture and dividing walls help to achieve a good result and a higher score. Bene's products make a contribution towards the LEED, WELL Building Standard, DGNB, BREEAM, etc. certifications. Criteria include, for example, environmental product declarations, indoor air quality, acoustics and convertibility.

CT PEDESTAL Example configuration · CT pedestal · 12HE · 330 x 600 x 734 mm · Melamine, chipboard 19 mm · Total weight 39,94 kg

Environmental key figures · 99,7 % sortable by type · 98,8 % recyclable · 63,3 % of contents are renewable raw materials · 42,7 % recycled production materials

Materials Adhesives 0.01 kg / 0.04 % Zinc 0.14 kg / 0.41 % Plastic 1.09 kg / 3.23 % Steel 8.46 kg / 25.17 %

Fabrics 0.08 kg / 0.25 %

Wood 23.84 kg / 70.90 %

For each standard product configuration, Environmental Product Declarations (Lifecycle Data Sheets / LCDS) can be provided. These are prepared in accordance with EN ISO 14040, EN ISO 14044 and the applicable Product Category Rules (PCR) of the International EPD® System for UN CPC 3811, 3812 and 3814. The LCDS include the Product Carbon Footprint (PCF) covering the entire life cycle (cradle-to-cradle). Environmental information from Bene: https://bene.com/en/bene/sustainability