product-data-sheet-bene-accessoires by Bene Office

ACCESSORIES Our practical accessories and office tools can be arranged to match our Panel collection - Bene's organisational and screening elements. The extensive range of accessories allows for customising and organising of a workstation - and within direct reach as well. The collection ranges from visual screening elements, CPU and screen

mounts to storage compartments and trays to ensure an orderly workspace, and helpful magnetic and fabric pin boards to bring some added colour. The highly sophisticated organsation rail system ensures that all Bene accessories can be integrated with our panels, making them truly multi.

INSPIRING OFFICES. SINCE 1790.

ACCESSOIRES PRODUCT DESCRIPTION

PRODUCT DESCRIPTION TABLE ADD-ON ELEMENTS Modesty panels For the provision of visual screening and/or upgrading of free-standing workstations. The sliding panels can be attached to desks in the Workstation and Consult ranges. Modesty panels are available it the following materials: Chipboard · Material thickness 16 mm · Assembly flush to the rear edge of the desk, to universal adapters or shortened to frames. · With Filo desk systems and angled desks in the Workstation and Consult ranges, the fronts are mitre cut and joined to each other by means of connection fittings.

Mesh covered · Assembly with angled desks flush to the rear edge of the desk, in Filo desk systems shortened directly to the frame.

Steel and chipboard panels can, however, also be shortened by 193 mm with the Workstation range. Exceptions are formed by combinations with lower desk container, KT sideboard and a table depth of 600 mm. Assembly in conjunction with T-Panel is only possible with a 20 mm gap.

DIMENSIONS Modesty panels Chipboard

Mesh covered

· Nominal dimension: 800-2.400 mm · Width: 800-2.400 mm · Height: 350 mm (400 mm from lower edge of the desk)

· Nominal dimension: 800-2.400 mm · Width: 650-2.250 mm · Height: 350 mm (400 mm from lower edge of the desk)

The actual width of the modesty panel is determined by the nominal dimension, the slab-end finish, and the desktop shape.

2 © Bene GmbH, 10/2026

ACCESSOIRES PRODUCT DESCRIPTION

PRODUCT DESCRIPTION CPU holder Flexible holder for computers below the desk surface by means of an adjustable strap.

DIMENSIONS CPU holder · Width: 240 mm · Height: 525 mm · Depth: 291 mm

· Assembly on frame for LEVEL (LIFT) or on tabletop for LEVEL PURE (LIFT). · PC height max. 45 cm. · Load: max. 30 kg

LEVEL (LIFT)

· Width: 240 mm · Height: 530 mm · Depth: 291 mm

LEVEL PURE (LIFT)

Screen Lateral screening in two different versions. A rectangular shape which closes flush to the desk edge and a shape running under and in front of the table top for even better screening.

· With stand feet, can be freely positioned on table top.

Screen

· Width: 800 mm · Height: 385 mm (with screen base)

Additional felt glides are stuck on the stand feet in order to protect the table top. · Width: 800 mm · Height: 535 mm (with screen base)

3 © Bene GmbH, 10/2026

ACCESSOIRES PRODUCT DESCRIPTION

PRODUCT DESCRIPTION ORGANISATION ELEMENTS The organisation elements can be attached to the organisation profile of the RV dividing wall and the T-Panels. Magnetic screen and pin screen Magnetic screen · Steel plate · Material strength 1 mm (without hook-in lug) · is hung into the organisation profile (not organisation rail)

Pin board · soft fibreboard covered with fabric on steel plate · Material thickness 10 mm (without hook-in lug) · is hung into the organisation profile (not organisation rail)

A minimum panel height of 1.135 mm is required in order to hook the magnetic screen and pin screen in. Check the configuration of the T-Panels and the hook-in height.

Magnetic board The magnetic board is equipped with organisational grooves which allow steel trays to be hooked into it. (plastic trays are not suitable)

· Steel plate · Material thickness 3,5 mm (without hook-in lug) · is hung into the organisation profile (not organisation rail) · Maximum width for hanging into the organisation groove is 314 mm.

A minimum panel height von 1.135 mm is required in order to hook the magnetic board in. Check the configuration of the T-Panels and the hook-in height.

DIMENSIONS Magnetic screen

Pin board

Magnetic board

· Nominal dimension: 400-1.200 mm · Width: 390-1.190 mm · Height: 350 mm

· Nominal dimension: 400 mm · Width: 390 mm · Height: 350 mm

Magnetic screen white only for nominal dimension: 400 (width 390) mm

4 © Bene GmbH, 10/2026

ACCESSOIRES PRODUCT DESCRIPTION

PRODUCT DESCRIPTION Drawers The organisation elements can be attached to the organisation profile of the RV dividing wall and the T-Panels. The drawers are available in three versions. All three are made of steel plate and are hooked into the organisation profile or organisation rail. A minimum panel height of 1.135mm is required in order to hook the drawers in. Check the configuration of the T-Panels and the hook-in height. closed

open

open, short

DIMENSIONS Drawer closed

Drawer open

Drawer open short

· Width: 308 mm · Height: 43 mm · Depth: 215 mm

· Width: 308 mm · Height: 43 mm · Depth: 145 mm

5 © Bene GmbH, 10/2026

ACCESSOIRES PRODUCT DESCRIPTION

PRODUCT DESCRIPTION Compartment · Chipboard 19 mm · is hung directly onto T-Panel Pure · T-Panel Pure with compartment can be only hung in with pin board

A minimum panel height of 1.135mm is required in order to hook the ompartment in. Check the configuration of the T-Panels and the hook-in height.

Counter top for T-Panel Extend for T-Panel Pure · Chipboard 19 mm, compact desk top 13 mm · Assembly off-centre to the panel

The position of the counter top can be freely selected anywhere along the T-Panels. Maximum load: 10 kg.

DIMENSIONS Compartment

Counter top for reception panel for T-Panel Pure

· Nominal dimension: 600 mm · Width: 600 mm · Height: 184 mm · Depth: 220 mm

· Width: 800-2.400 mm · Depth: 240 mm

6 © Bene GmbH, 10/2026

ACCESSOIRES PRODUCT DESCRIPTION

PRODUCT DESCRIPTION Trays and cups Plastic trays Pencil tray

Paper tray in A4 landscape format

Paper tray in A4 portrait format

Steel tray

The metal insert is always included with the steel tray. Steel trays are hooked into the organisation profile or the organisation rail. Check the configuration of the T-panel and the distance to the table top.

DIMENSIONS Pencil tray

Paper tray in A4 landscape format

Paper tray in A4 portrait format

· Width: 380 mm · Depth: 150 mm

· Width: 350 mm · Depth: 270 mm

· Width: 270 mm · Depth: 350 mm

Steel tray

· Width: 322 mm · Depth: 222 mm · Height: 127 mm

7 © Bene GmbH, 10/2026

ACCESSOIRES COLOURS AND MATERIALS

COLOURS AND MATERIALS MATERIALS AND SURFACES The following materials and colours are available for this product.

Product

Melamine

Veneer

Mesh_02

Fabric P0-P5

AL anodised aluminium

WI white, powder-coated

AL aluminium, powder-coated

SZ black, powder-coated

Plastic, transparent

Plastic, black

•. . . . . . . . . . available - . . . . . . . . . . not available

Chipboard modesty panel

•

Modesty panel mesh

•

CPU holder

•

Screen 2

•

CBS parts

•

Magnetic screen

•

Pin board

•

Magnetic board

•

Drawer closed

•

Drawer open

•

Drawer open, short

•

Compartment

•

Counter top for T-Panel Pure Extend 3X 3

•

Pencil tray

•

Paper trays

•

Aluminium tray

•

Steel tray

•

Adjustable strap in SZ black Stand feet in SZ black or WI white, stuck on felt glides in SZ black 3 Extension parts and metallic parts in AL aluminium, powder-coated 1 2

Included colour representations, restrictions on colour and panel combinations as well as permitted fabric and leather collections  see following pages or product data sheet „colours & materials“

ACCESSOIRES COLOURS & MATERIALS

COLOURS & MATERIALS MELAMINE

MW white

MQ office white

MSW snow white 1

MC canvas

MP platinum

MA aluminium

MH stone grey 1

TM clay 1

MS slate

MD urban grey 1

MB basalt

MJG jade green 1

DISCONTINUATION: OCTOBER 2027

EZ oak vicenza 1

MEK oak kendal 1

MAK maple classic 1

MBK beech classic 1

NG walnut grey 1

MNP walnut pavia 1

not available for compact top

ACCESSOIRES COLOURS & MATERIALS

COLOURS & MATERIALS VENEER

EF oak natural 1

EY oak sylt 1

EG oak grey 1

ER oak amaretto 1

EV oak vulcano 1

NF american walnut 1

NR walnut siena 1

NB walnut umbra 1

NA walnut anthracite 1

KD chestnut natural 1

KP chestnut brown 1

KQ chestnut grey 1

AK canadian maple 1

BJ bamboo 1

BG beech grey 1

BU beech natural 1

Veneers also available in matt finish.

ACCESSOIRES COLOURS & MATERIALS

COLOURS & MATERIALS NET (NET_02)

6Z black

METAL SURFACE POWDER-COATED

WI white

AL aluminium

SZ black

ALUMINIUM ANODISED

AL aluminium

Different fabric collections are available as cover: Xtreme Plus, Urban Plus, Inn, Era, Step, Step Melange, Soft Next, Remix, Mainline Flax, Focus, Bonsai Reboot, Panama, Fiord, Steelcut, Assam, Focus Melange, Artisan, The Cool, Steelcut Trio, Hallingdal, Elle, Coda. More information about the collections is available at www.bene.com. Our outdoor fabrics can also be used on products for indoor use. However, this does not mean that the indoor products are suitable for outdoor use.