Warranty Card Warranty Conditions BUK AUST P/L warranty set out in the Warranty Statement below is subject to the following conditions, and accordingly shall not apply if: 1. The Good was not new as at the date of purchase or proof of purchase details (such as invoice, receipts or transaction record) are not provided. 2. There is a failure to follow product’s installation instructions, evidence cannot be provided that the Good was installed by a licensed plumber or the Good is used other than in accordance with BUK AUST P/L specifications. 3. Repair work is has not received authorization from Bad und Kuche to proceeding with the work in writing. 4. According to the Australian Standards or regulations, the Australian Standards (AS/NZ 3500.1 Plumbing and Drainage Part 1: Water services) which specify that water pressure must be limited to 500kpa on any new home, extension, or renovation. The recommended continuous operating pressure for tapware is between 150-500kpa (maximum static pressure must not exceed 500kpa). 5. Harsh detergents or abrasive cleaners are used on any finishes of the Good. 6. The Good is not installed in accordance with the relevant Australian Standards and Plumbing Codes. 7. The Good has been tampered with or repaired in any way. 8. The Good has been damaged by misuse, accident or neglect. 9. The Good has discolouration, corrosion or rusting from other environmental factors.
BUK AUST PTY LTD
163 Woodpark Rd, Smithfield NSW 2164 Australia www.badundkuche.com 1 of 6