PORTFOLIO
2021
ARCHITECTURE + DESIGN
BIANCA ARCIERO BIANCAARCIERO@GMAIL.COM
+41 77 539 7804
EXPERIENCE 2019.03 - 2020.11
GRUNER&FRIENDS
Basel
Architect. Full time employee. Responsibilities: concept design, programmatic studies, preliminary studies; building permission documents, and construction detailling for projects at various scales. 2018.01 - 2019.01
FRW ARCHITECTS New York+Montréal Registered architect OAQ (Ordre des Architectes du Québec) Canadian l Italian
2016.09 - 2017.01
ECODOMUS CONSTRUCTION Montréal
SKILLS
Full time internship: coordiator of the renovation of a vacant suite into a clinic. Responsibilities: planning, coordination, and site supervision for the duration of the project (with support from the general contractor).
Revit AutoCAD Rhinoceros Grasshopper Adobe suite Sketch Up Microsoft office Fusion 360 HTML ArcGIS English Français Italiano Deutsch
Architect. Full time employee. Responsibilities: construction documents and drawings, code and zoning studies, coordination with engineers and other third parties during construction phase.
2012 - 2016
ARCHI-CIVIC Montréal
Architectural intern. Responsibilities: concept development, programming, preliminary drawings, presentations, execution drawings, material specification, marketing & photography. 2015 Mother tongue Fluent Fluent B2
UNIVERSITÉ DE MONTREAL
Teaching assistant. Teaching assistant for prof. Thomas Balaban’s course ARC2214 “Conception assistée par ordinateur”. Responsibilities: directing tutorials on Rhinoceros & Grasshopper to first year architecture students.
PORTFOLIO
EDUCATION
www.bit.ly/2PW5jol
2015 2013 2018 2016 2012
Master in Architecture Université de Montreal Bachelor in Architecture Université de Montreal Dale Carnegie Public Speaking Piano Lauréa I L’École préparatoire de musique UQAM Bronze Cross Lifeguard Red Cross
DISTINCTIONS 2016 2016 2015
ICSD Selected for 4th int. conference on sustainable development AMASC Summit Ambassador at 1st AMASC youth conference M.ARCH honors Graduated on the Dean’s List of Honors
VOLUNTEER 2018 2015-19
Architectes de l’Urgence Volunteer for various events SHSM Alumnae Board Secretary
2015-17
Organisation of events for alumnae and fundraising activities Heritage Montreal Architectural guide for the ArchitecTours
WORK EXPERIENCE 2019-2020 agence firm GRUNER&FRIENDS outils tools REVIT phase phase 1- preliminary, 2- building permit
BORGO MIRANDA HOTEL RESORT
Architecte au sein d’une équipe de trois, responsable de la conception et des plans du permis de construire de ce nouveau projet de complexe hôtelier (soumis en juillet 2020). Situé dans la ville pittoresque de Monte Bre, ce centre de bien-être vise à offrir une expérience de luxe ainsi qu’à revitaliser la ville en intégrant des éléments clés tels que des places communautaires et des magasins locaux. Diverses études ont été réalisées à l’aide de l’IA pour optimiser l’emplacement des unités sur le site. Le concept de conception modulaire a été choisi pour permettre une livraison et une construction efficaces dans cette ville isolée. Architect in a team of three, responsible for the design and the building permit drawings of this new hotel resort proposal (submitted July 2020). Located in the quaint town of Monte Bre, this wellness resort aims to offer a luxury experience as well as revitalize the town by integrating key elements such as community squares and local shops. Various studies we executed using AI to optimize the location of the units on site. The modular design concept was chosen to allow efficient delivery and construction in this remote town.
01
Plan du rez-de-chaussée de l’hotel Hotel ground floor plan.
02
Coupe complète du projet Full project section
04
03
Vue depuis le hall de l’hôtel View from hotel lobby
Vue depuis le nouveau carré View from new community square
WORK EXPERIENCE 2018 agence firm FRW ARCHITECTS outils tools AUTOCAD, COMcheck phase phase 3-construction drawings & coordination
SYNAGOGUE AND CONDOMUNIUMS 814 BEDFORD ST, BROOKLYN
Architecte principal responsable des documents de construction et de l’administration pour ce bâtiment de 4 étages, en structure en béton, à Brooklyn. Travaillée avec les codes du bâtiment et les règlements de zonage de New York pour assurer la conformité du bâtiment. Cela comprend également l’utilisation de COMcheck, le logiciel de conformité (IEFF et ASHRAE). Principal architect responsible for the construction documents and administration of this 4 story building, concrete structure, in Brooklyn. Working with New York building codes and zoning bylaws to ensure the conformity of the building. This includes designing according to and using COMcheck, the compliance software (for IEFF and ASHRAE Standard conformity).
01
Plan du rez-de-chaussée Ground floor plan
02
Élévation principale, Bedford Street Main elevtion, Bedford Street
03
Coupe de mur, façade Bedford St. Wall section, Bedford St. facade
04
Coupe du batiment Building section
05
Étude de code et séparation coupe-feu Egress diagram + fire rated compartments
06
Image du project construit 2019 2019 project completion
WORK EXPERIENCE 2018 agence firm FRW ARCHITECTS outils tools AUTOCAD, COMcheck phase phase 2-building permit; 3-construction drawings & coordination
NEW MIXED USE PROJECT MYRTLE AVE., BROOKLYN, NY
Architecte principal responsable des documents de construction et de l’administration pour ce bâtiment de 4 étages, en structure en béton, à Brooklyn. Travaillée avec les codes du bâtiment et les règlements de zonage de New York pour assurer la conformité du bâtiment. Cela comprend également l’utilisation de COMcheck, le logiciel de conformité (IEFF et ASHRAE). Principal architect responsible for the construction documents and administration of this 4 story building, concrete structure, in Brooklyn. Working with New York building codes and zoning bylaws to ensure the conformity of the building. This includes designing according to and using COMcheck, the compliance software (for IEFF and ASHRAE Standard conformity).
01
Coupe detail Detail section
02
Détail de PTAC murale intégrée Integrated PTAC wall section detail
03
Rendu du coin nord-ouest North-west corner render
04
Plan du sous-sol Cellar floor plan
05
Étude du rapport air et lumière naturel Natural light and air compliance
06
Plan bord de dalle de béton du 2e 2nd floor slab edge drawing
07
Conformité énergétique des murs et valeur-R Wall assemblies + R-values for energy compliance
WORK EXPERIENCE 2019-2020 agence firm GRUNER&FRIENDS outils tools AUTOCAD phase phase 2- building permit
BASEL RESIDENCE INTERIOR + EXTERIOR RENOVATION
Responsable du développement, de la soumission et du suivi des documents pour la rénovation résidentielle de ce bâtiment patrimonial à plusieurs unités situé à Bâle-ville. Le client souhaitait moderniser l’intérieur ainsi qu’ouvrir la façade arrière. Responsible for the development, submission and follow-up documents for the residential renovation of this multi-unit heritage building located in Basel city. The client desired to modernize the interior as well as open up the rear facade.
A
EL.
+20,16 / 294,94 müM
3.80
DACH
1.79
1.52
0.27 2.75
EL.
2.93
0.16
1.02
3.29
0.26 0.66
0.32
+13,43 3. OBERGESCHOSS
EL.
2.15
2.75
0.40 2.75
EL. 1.30
0.29 0.16
3.29
+16,36 DACHGESCHOSS
1.30
0.27
1.12
2.75
1.12
+10,14 2. OBERGESCHOSS
0.25
2.95
2.96
3.52
3.52
1.50
0.26 0.75
1.12
1.10
EL.
2.25
0.32
3.52
0.26 0.75 1.25
2.77
2.79
3.52
+6,62 1. OBERGESCHOSS
0.25
EL.
+3,10
0.93
3.10
0.60
2.07
1.40
1.92
1.00
2.07
1.40
ERDGESCHOSS 1.00
EL. GLAZING AREA 2.07m2
GLAZING AREA 1.31m2
0.14 0.73
1.96
0.85
0.76
1.45
1.12
0.36
0.36
0.80
0.08 3.71 1.35
3.71
0.76
0.9 2
3.71 0.55
0.75
1.50
0.08
1.70
1.20
1.00
1.12
1.70 2.00 3.10
1.20
0.60
0.55
0.08 0.08
1.02 0.80
1.12
3.71
0.76
0.8
0.60
2
0.60
0.60
0.75 1.02
1.20
0.76
1.12
1.02 0.80
1.91
0.76 0.60
0.14
0.14 1.20
0.36
1.02 0.80 1.12
1.20
0.36
1.02
02
0,00 m / 274,78 müM UNTERGESCHOSS
TOTAL GLAZING AREA 5.45m2
Modifications a la facade arrière Rear elevation modifications
0.14
01
GLAZING AREA 2.07m2
0.60
1.45
0.75 3.10
Études d’aménagement intérieur d’une salle de bain Bathroom layout studies
0.30
2.05
0.75 3.10
0.30
0.45
1.70
0.65 3.10
0.30
3.80 2.00
2.40
0.50
0.40
0.23
0.94
4.57
1.90
0.90 0.10
2.70
2.93
1.30
0.80
0.64 0.10
1.50
0.90 0.23
0.40 1.30
0.85
2.15 6
0.32
0.300.32
0.80
1.65
3.38
0.26 0.25 0.60
1.64
0.14
3.00
1.90
0.14
1.30
0.29
0.300.29
0.75
Plan du bord de dalle, rez-de-chaussée. Slab edge drawing for ground floor slab.
04
4.80
A
2.40
A 11.28
3.19
0.45
3.19
4.17
0.90
Sanierung der bestehenden Leitung SCHLAFZIMMER 12.5 m2
KÜCHE
4.95
18 m2
ESS ZIMMER
4.15
4.35
WOHNZIMMER / ESSZIMMER / KÜCHE ABTEIL 6
Abriss des Schornsteins ist statisch möglich
1.00
SCHLAFZIMMER 2 19 m2
(Abriss des Schornsteins ist statisch möglich)
5.96
2.05
3.70
11.38
12.70
1.28
0.73
An dieser Stelle sind statische Massnahmen nötig um die tragende Wand abzufangen.
2.32
0.95
HALLE 5.7 m2
Bedingt durch die Isolation ist in 70cm ist kein weiterer Raum möglich. Ein Waschturm könnte anstatt dessen eingesetzt werden
0.50
HALLE
0.75
0.30
1.80
1.58
0.90
2m2 mehr
1.21
2.40
2.99 5 m2 BADEZIMMER
46 m2
ABTEIL 4 5.5 m2
5.30
WOHN ZIMMER
ABTEIL 5 7m2
0.60 4.00
4.00 ABTEIL 1 4.2 m2
5.30
SCHLAFZIMMER 31 m2
HEIZRAUM I
ABTEIL 2 6.5 m2
HEIZRAUM II
0.55
ABTEIL 3 8 m2
0.99
0.58 0.73
9.95
Neue Leitung
0.60
0.75
0.60
4.00
ABWASSER SCHACHT
03
Coupe de mur, façade Bedford St. Wall section, Bedford St. facade.
05
Étude de code, plan résidentiel typique. Egress diagram, typical residential floor.
3.19
WORK EXPERIENCE 2019-2020 agence firm GRUNER&FRIENDS outils tools AUTOCAD phase phase 3- construction details
KPMG ZURICH FACADE RENOVATION
Responsable de divers détails de construction de cette rénovation de façade à grande échelle de KPMG Zurich ainsi que des études de matérialité extérieure et d’éclairage. Responsible for various construction details of this KPMG Zurich large-scale facade renovation as well as exterior materiality and lighting studies.
Vordach
+3.28
6 x Briefkasten quer liegend BHT 275 x 355 x 250mm +1.29
1.60
+1.215 Aschenbecher
Kemper Tresor
1.05
+1.015
Ansicht Eingang BAD172, Nr.1
Rohbaukante Aschenbecher Vereinzelung
Badge
1.27
• ••• •• • • •• • • •Kemper • • • • • • •Tresor ••
2.83
Grundriss Eingang BAD172, Nr.1 1.805
1.80 2.86
01
1.39
Conception de portes de sécurité extérieures et coordination des dessins d’atelier Exterior security doors design and shop drawing coordination
1318
1318 5
PANEL 1 OPAQUE
PANEL 2 1% OPENING .05m2 / 5m2
1318 13
14
20
PANEL 3 4% OPENING .2m2 / 5m2
A
3850
els
02
Conception panneaux métalliques et coordination avec les cloisons CVC Facade design of metallic panels and coordination with HVAC bulkheads
03
Panneaux pour méchanique sur toit Panel design for roof bulkhead
04
Étude et conception des matériaux et de l’éclairage de l’entrée du rez-de-chaussée Material and lighting design of ground floor entrance
05
Étude et conception des matériaux et de l’éclairage du toit terrace Material and lighting design of roof terrace
M.ARCH cours course tuteur professor école school outils tools
STUDIO 2015 ALESSANDRA PONTE UNIVERSITÉ DE MONTRÉAL arcGIS, RHINO, GRASSHOPPER
TESTING GROUND: SCHEFFERVILLE TERMINAL (2/2)
Participée à un atelier de recherche dont le sujet d’analyse était le développement des villes minières de la côte nord du Québec par voie de la cartographie. Notre équipe (de trois) a décortiqué la ville délaissée de Schefferville. Des études des formations géologiques, de la géographie et du caractère de nordicité étaient indispensables à la compréhension de la circonstance actuelle de ce territoire. Voir la publication du projet dans le journal ARPA. Participated in a research studio focusing on mining towns located in the northern part of the Canadian province of Quebec. Our team focused on the abandoned town of Schefferville. The mission was to analyze the site according its geology and geography, and to propose strategies that would promote future development. See this project published in the ARPA Journal.
PLATE 1 EXPRESSION OF TIME AND MOVEMENT
The Labrador Trough is a geological formation that is home to a rich, dense concentration of iron ore within the Canadian Shield (a large mass of Precambrian rock that covers most of Canada). Located in western Labrador and Québec, it is a 1,600 km long belt composed primarily of sedimentary and volcanic rock running North-South through the Canadian Shield. The Labrador Trough is 2.3 billion years old and was created by the collision of secondary plates creating intense internal pressure, the distancing of the plates allowing for accumulation of water, the formation of sedimentary rocks due to rich sediments deposited by water, and the intense compressive forces creating large deposits of iron ore.
PLATE 2 NORDICITY
Nordicity is a concept invented by Canadian geographer Louis Édmond Hamlin in the 1960s. This term expresses the quality of being Nordic quantified by a polar index. This index rates the degree of ‘northerness’ of a given territory through the study of 10 criteria, based on human and natural factors. The factors are latitude, average summer temperature, average winter temperature, type of permafrost, annual precipitation, type of vegetation, accessibility, population density, and economic activity. Each criterion can attain a maximum polar value of 100, thus the North Pole would have a theoretical index of 1000 polar value. This method of quantification is an important tool used to understand the shifting identity of the arctic and sub-arctic region over time. In order to comprehend the northern identity of the region of study, the team calculated and compared the index of norcidity of 9 neighboring cities in 1970 and in 2013.
M.ARCH cours course tuteur professor école school outils tools
2015 RESEARCH IN TECTONICS CHRISTIAN HOLGER HONG KONG UNIVERSITY RHINO, GRASSHOPPER
ORCHID PAVILION COMPETITION
La structure du pavillon est un système en trois dimensions qui sert à mettre en valeur les orchidées en réaménagement des parcours divers pour déambuler. Le triangle équilatéral est l’unité de base qui compose le plancher et se répète à la toiture. Le pavillon est conçu de façon à être modulaire et démontable. Cette flexibilité offre l’avantage de réaliser de multiples dispositions. The structure of the pavilion serves as a 3-dimensional system displaying and framing orchids. The design additive unites are equilateral triangles of 1m side lengths. The equilateral module is mirrored in the roof system. The compositional structural units consists of wooden floor planes, wooden rooftop panels, columns and metallic clamps/junctions. This exhibitions pavilion is designed as a portable modular building. The system of modular construction has been thoroughly studied in order to conceive a temporary, demountable and flexible system. The final result is variable in size and configurations. The simplicity of the structure allows the subject of the pavilion, the orchids, to take the front stage.
01
02
Rendu proposé Rendering
Plan de la toiture Roof plan
03
Ce serre-joint est l’élément d’attache conçu pour ce système. Il sert à fixer les modules du plancher, du plafond, les paniers d’orchidées et les bancs. Le serre-joint reprend la géométrie du pavillon permettant 6 dispositions d’attache. There is only one type of clamp used as joint for all the building elements: floor panels, roof panels ad furniture (orchid containers and seating). The clamps mimic the geometric patten of the grid allowing for 6 positions.
04
Plan du plancher et coupe du pavillon Floor plan and sectio of the pavilion
VARIA
localisation location MONTRÉAL outils tools RHINOCEROS, GRASSHOPPER, LASER CUTTER
LUX
Une exploration de lumière et de matière inspirée par les écrits de l’auteur Antoine de Saint-Exupéry. L’objet fait raisonner la lumière dans son corps et l’émet vers l’extérieur par diffusion; par réfraction, son épaisseur projette des canons lumineux. Cette épreuve s’est transformée subséquemment en étude d’appareil d’éclairage et voici un prototype. An exploration of light and material inspired by the writings of Antoine de Saint-Exupéry. The object amplifies the light within its body and transmits it to the outside by diffusion while its thickness projects concentrated light beams by refraction. This experiment then transformed into a lighting design project: the following is a prototype.
Photos des prototypes fabriqués Photographs of the built prototypes
localisation location MONTRÉAL outils tools RHINOCEROS, GRASSHOPPER, LASER CUTTER
SKETCHES