120117 user guide trifix gb web

Page 1

PRODUCT OVERVIEW 13 03

04

14

06

15 07 05 16 08 09

17

10 11

02

TWO-YEAR WARRANTY

To ensure the full protective effect of the child safety seat: • In the event of an accident with an impact speed above 10 km/h it is possible that the child safety seat may have been damaged, but that the damage may not be immediately obvious. In this case the child safety seat must be replaced. Please dispose of it properly. • Regularly check all important parts for damage. Make sure that the mechanical components in particular are all in perfect working order. • To prevent damage, ensure that the child safety seat does not become jammed between hard objects (car door, seat runners etc.). • Always have the child safety seat checked if it has been damaged (e.g. if it is dropped). • Never lubricate or oil parts of the child seat.

For this child safety seat we offer a 2-year warranty against manufacturing or material defects. The warranty period is effective from the day of purchase. The warranty covers only child safety seats which have been handled properly and which have been sent to us in a clean and proper condition.

12 01 02 03 04 05 06

ISOFIX attachment points (car) ISOFIX insert guides Headrest Harness retainer Harness buckle Shoulder pads

07 08 09 10 11 12

Tested and certified according to ECE* R 44/04

BRITAX RÖMER child safety seat

TRIFIX

Group

Body weight

1

9 bis 18 kg

Shoulder straps Adjusting button Adjustment strap Recline handle ISOFIX unlocking buttons ISOFIX indicators

13 14 15 16 17 18

Please observe the waste disposal regulations in your country.

Adjusting ring of the headrest Top Tether User guide compartment Fabric loop ISOFIX locking arms Seat shell

The child safety seat has been designed, tested and certified according to the requirements of the European Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certification number are located on the orange certification sticker (sticker on the child safety seat). • This certification will be invalidated if you make any modifications to the child safety seat. • The TRIFIX child safety seat must only be used to secure your child in the vehicle. It must never be used as a seat or toy in the home.

Disposal of packaging

Container for cardboard

Cover

Residual waste, thermal utilisation

Plastic parts

In accordance with the labelling in the designated container

Metal parts

Container for metals

Harness straps

Container for polyester

Buckle &latch

Residual waste

Care for the harness buckle It is vital for the safety of your child that the harness buckle works correctly. Malfunctions of the harness buckle are usually caused by accumulations of dirt or foreign bodies: • The buckle latches are ejected only slowly when the red release button is pressed. • The buckle latches will no longer lock home (i.e. they are ejected again if you try to push them in). • The buckle latches engage without an audible „click“. • The buckle latches are difficult to insert (you feel resistance). • The buckle only opens if extreme force is applied. Remedy wash out the harness buckle so that it functions properly once again:

washing machine‘s cycle for delicate items (30 °C). Please observe the instructions on the washing label of the cover. • The plastic parts can be cleaned using soapy water. Do not use harsh cleaning agents (such as solvents). • The harnesses can be washed in lukewarm soapy water. Caution: Never remove the buckle latches 21 from the straps. • The shoulder pads can be washed in lukewarm soapy water. Removing the cover 03 31 05

Cleaning the harness buckle

20

10

22

Use, care and maintenance The child safety seat must be used in accordance with the user instructions. We point out expressly that only genuine accessories and replacement parts must be used.

BRITAX EXCELSIOR LIMITED 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom

t: +44 (0) 1264 333343 f: +44 (0) 1264 334146 e: helpline@uk.britaxeurope.com www.britax.eu

t: +49 (0) 731 9345 0 f: +49 (0) 731 9345 210 e: info@de.britaxeurope.com www.roemer.eu

USE IN THE VEHICLE

CARE AND MAINTENANCE

20

What is covered by the warranty? Fabrics: All of our fabrics meet very high requirements with regard to colour fastness when exposed to UV radiation. Nevertheless, all fabrics fade when exposed to UV radiation. This is not a material defect, but rather a normal sign of wear which is not covered by the warranty. Buckle: Buckle malfunctions are often due to accumulations of dirt or foreign bodies which may stop the buckle from working properly. If this happens, the buckle can be cleaned, olease follow the procedure described in your user instructions. Please contact your retailer immediately in the event of a warranty claim. He or she will give you the advice and support you need. When processing claims, product-specific depreciation rates will be applied. Please refer to our General Terms and Conditions which are available from your retailer.

BRITAX RÖMER Kindersicherheit GmbH Blaubeurer Straße 71 D-89077 Ulm Germany

*ECE = European Standard for Child safety Equipment

05

The Warranty does not cover: • natural signs of wear and damage resulting from excessive stress • damage resulting from inappropriate or improper use

31

1. Open the harness buckle 05 (press the red button). 2. Pull the elastic loop over the harness buckle 05 . 2. Open the Velcro fastener on the crotch pad 20 and take off the crotch pad from the cover. 3. Slide the metal plate 22 which is used to fasten the harness buckle 05 to the seat shell up on its edge through the strap slot 31 . 4. Soak the harness buckle 05 in warm water with dishwashing liquid for at least an hour. Then rinse and dry it thoroughly. Cleaning Please be sure to use only genuine Britax/RÖMER replacement seat covers, as the seat cover is an integral part of the child safety seat which plays an important role in ensuring that the system works properly. Replacement seat covers are available from your retailer. • The child seat must not be used without its cover. • The cover can be removed and washed with a mild detergent using the

1. Press the recline handle 10 upwards and slide the seat shell 18 to the rear into the upright position. 2. Loosen the harness straps as far as possible. 3. Open the harness buckle 05 (press the red button). 4. Open the Velcro fastener on the crotch pad 20 . 5. Slide the headrest 03 to its lowest position. 6. Remove the cover of the headrest 31 . 7. Open the poppers on the left and right of the rear part of the cover. 8. Fold the rear part of the cover onto the seat surface. 9. Thread the harness straps through the cutout in the cover. 10.Unhook both of the elastic hoops at the rear, upper edge of the seat shell. 11. Unhook the elastic seam of the cover under the edge of the seat shell. TIP: Start at the handles on the side and at the upper edge of the seat shell. 12.Pull the cover up and over the bezel of the strap adjuster. 13.Feed out the harness buckle 05 and the end of the strap from the cover. 14.Pull the cover upwards a little and then put it with the cutout over the headrest 03 . Re-fitting the Cover: Simply follow the steps in the opposite order. Caution: Check that the harness straps are not twisted and that they have been correctly inserted in the belt slots on the cover.

Please observe the instructions on the use of child restraint systems described in your vehicle owner’s manual.

9 - 18kg

The seat may be used in all vehicles equipped with the ISOFIX and Top Tether anchoring systems. Please consult your vehicle owner’s manual for information about the Top Tether anchoring points and the seats which are approved for child safety seats in the weight class 9-18 kg. In the direction of travel

Yes

Against the direction of travel

No 1)

TRIFIX

On seats featuring: ISOFIX attachments (between seat surface and backrest) and Top Tether anchoring points (for Yes 2) example on the parcel shelf, on the floor or behind the backrest)

User Instructions

(Please observe the applicable regulations in your country)

1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the vehicle seat is also approved for use by adults. The seat must not be positioned anywhere where it is in range of an airbag which is being deployed. 2) If there is a front airbag: Slide the passenger seat a long way back and refer to any instructions in vehicle owner’s manual.

NEXT CHILD SAFETY SEATS BRITAX RÖMER Child safety seats KID KID plus KIDFIX KIDFIX SICT

Testing and certification in accordance with ECE R 44/04 Group

Body weight

2-3 2-3 2-3 2-3

15 - 36 kg 15 - 36 kg 15 - 36 kg 15 - 36 kg

GB

01

18

CARE INSTRUCTIONS


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.