1. SUBLIMATION PRINT
1. DTF OR VINYL PRINTING
2. Once the design has been printed, tear the edges of the sublimation paper to avoid impressions being made on the fur.
2. For best vinyl results, use a product with a thicker adhesive e.g a flock or glitter, this helps the glue reach the root of the fur.
3. Place design onto the toy and cover with a protection sheet to avoid the fur burning. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.
3. Place design onto the toy and cover with a protection sheet to avoid the fur burning. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening.
4. Heat the press to 185°C and press for 60 seconds, if you are using additional fabric to protect the pile, press for 90 seconds as the fabric will absorb the heat.
4. Heat the press to 185°C and press for 15 seconds, if you are using additional fabric to protect the pile, press for 30 seconds as the fabric will absorb the heat.
5. Remove the protection sheet and peel off the sublimation paper to reveal the design.
5. Peel off the backing and return the protection sheet before re-pressing for a further 10 seconds to seal the design.
STEP 3 ENJOY
STEP 2 PLATE UP
STEP 1 CHOOSE YOUR TOY
STEP 2 UNZIP AND REMOVE THE STUFFING
1. EMBROIDERY
STEP 4 ADD BACKING, AQUAFILM AND CENTRE MARK
STEP 3 FRAME UP
STEP 1 CHOOSE YOUR TOY
EMBROIDER 2. Frame up the toy ensuring the fabric is pulled taught and no excess has been caught in the hoop or square. 3. Use a sheet of backing underneath the animal to stabilise the fur. 4. Use a sheet of water soluble aquafilm on top of the animal to let your stitches stay proud and not sink into the fur. 5. Once fixed to the machine make sure it is positioned straight, a laser needle will help. Alternatively, mark up a piece of a tape with a + to line up and remove before sewing. 6. Once stitching is complete, the backing can be torn off and the aquafilm can be dissolved.
STEP 6 ENJOY
STEP 5 RETURN THE STUFFING
7. Return stuffing into the toy.
See a demo on how to remove your S q ui d gy ’ s st uf f i ng: